Filippo Casamassima
my fork
Fork of
mbed
by 
mbed official
Revision 93:e188a91d3eaa, committed 2015-02-03
- Comitter:
- Kojto
- Date:
- Tue Feb 03 15:31:20 2015 +0000
- Parent:
- 92:4fc01daae5a5
- Child:
- 94:9ad691361fac
- Commit message:
- Release 93 of the mbed library
Main changes:
- Renesas RZ_A1H bugfixes - i2c, ticker
- new targets - Nucleo F303RE, Nucleo F070RB, BLE SMURFS,
Dragonfly 411RE,
- BusXXX - is connected method, plus operators addition
- LPC8xx - I2c fixes
- timestamp_t reverted to uint32_t
- RTX - fixes regarding stack (alignment, magic word)
Changed in this revision
--- a/BusIn.h Thu Nov 27 13:33:22 2014 +0000
+++ b/BusIn.h Tue Feb 03 15:31:20 2015 +0000
@@ -58,15 +58,35 @@
*/
void mode(PinMode pull);
+ /** Binary mask of bus pins connected to actual pins (not NC pins)
+ * If bus pin is in NC state make corresponding bit will be cleared (set to 0), else bit will be set to 1
+ *
+ * @returns
+ * Binary mask of connected pins
+ */
+ int mask() {
+ return _nc_mask;
+ }
+
#ifdef MBED_OPERATORS
/** A shorthand for read()
*/
operator int();
+
+ /** Access to particular bit in random-iterator fashion
+ */
+ DigitalIn & operator[] (int index);
#endif
protected:
DigitalIn* _pin[16];
+ /** Mask of bus's NC pins
+ * If bit[n] is set to 1 - pin is connected
+ * if bit[n] is cleared - pin is not connected (NC)
+ */
+ int _nc_mask;
+
/* disallow copy constructor and assignment operators */
private:
BusIn(const BusIn&);
--- a/BusInOut.h Thu Nov 27 13:33:22 2014 +0000
+++ b/BusInOut.h Tue Feb 03 15:31:20 2015 +0000
@@ -51,7 +51,6 @@
*/
void write(int value);
-
/** Read the value currently output on the bus
*
* @returns
@@ -73,12 +72,26 @@
*/
void mode(PinMode pull);
+ /** Binary mask of bus pins connected to actual pins (not NC pins)
+ * If bus pin is in NC state make corresponding bit will be cleared (set to 0), else bit will be set to 1
+ *
+ * @returns
+ * Binary mask of connected pins
+ */
+ int mask() {
+ return _nc_mask;
+ }
+
#ifdef MBED_OPERATORS
/** A shorthand for write()
*/
BusInOut& operator= (int v);
BusInOut& operator= (BusInOut& rhs);
+ /** Access to particular bit in random-iterator fashion
+ */
+ DigitalInOut& operator[] (int index);
+
/** A shorthand for read()
*/
operator int();
@@ -87,6 +100,12 @@
protected:
DigitalInOut* _pin[16];
+ /** Mask of bus's NC pins
+ * If bit[n] is set to 1 - pin is connected
+ * if bit[n] is cleared - pin is not connected (NC)
+ */
+ int _nc_mask;
+
/* disallow copy constructor and assignment operators */
private:
BusInOut(const BusInOut&);
--- a/BusOut.h Thu Nov 27 13:33:22 2014 +0000
+++ b/BusOut.h Tue Feb 03 15:31:20 2015 +0000
@@ -56,12 +56,26 @@
*/
int read();
+ /** Binary mask of bus pins connected to actual pins (not NC pins)
+ * If bus pin is in NC state make corresponding bit will be cleared (set to 0), else bit will be set to 1
+ *
+ * @returns
+ * Binary mask of connected pins
+ */
+ int mask() {
+ return _nc_mask;
+ }
+
#ifdef MBED_OPERATORS
/** A shorthand for write()
*/
BusOut& operator= (int v);
BusOut& operator= (BusOut& rhs);
+ /** Access to particular bit in random-iterator fashion
+ */
+ DigitalOut& operator[] (int index);
+
/** A shorthand for read()
*/
operator int();
@@ -70,6 +84,12 @@
protected:
DigitalOut* _pin[16];
+ /** Mask of bus's NC pins
+ * If bit[n] is set to 1 - pin is connected
+ * if bit[n] is cleared - pin is not connected (NC)
+ */
+ int _nc_mask;
+
/* disallow copy constructor and assignment operators */
private:
BusOut(const BusOut&);
--- a/DigitalIn.h Thu Nov 27 13:33:22 2014 +0000
+++ b/DigitalIn.h Tue Feb 03 15:31:20 2015 +0000
@@ -80,6 +80,16 @@
gpio_mode(&gpio, pull);
}
+ /** Return the output setting, represented as 0 or 1 (int)
+ *
+ * @returns
+ * Non zero value if pin is connected to uc GPIO
+ * 0 if gpio object was initialized with NC
+ */
+ int is_connected() {
+ return gpio_is_connected(&gpio);
+ }
+
#ifdef MBED_OPERATORS
/** An operator shorthand for read()
*/
--- a/DigitalInOut.h Thu Nov 27 13:33:22 2014 +0000
+++ b/DigitalInOut.h Tue Feb 03 15:31:20 2015 +0000
@@ -85,6 +85,16 @@
gpio_mode(&gpio, pull);
}
+ /** Return the output setting, represented as 0 or 1 (int)
+ *
+ * @returns
+ * Non zero value if pin is connected to uc GPIO
+ * 0 if gpio object was initialized with NC
+ */
+ int is_connected() {
+ return gpio_is_connected(&gpio);
+ }
+
#ifdef MBED_OPERATORS
/** A shorthand for write()
*/
--- a/DigitalOut.h Thu Nov 27 13:33:22 2014 +0000
+++ b/DigitalOut.h Tue Feb 03 15:31:20 2015 +0000
@@ -77,6 +77,16 @@
return gpio_read(&gpio);
}
+ /** Return the output setting, represented as 0 or 1 (int)
+ *
+ * @returns
+ * Non zero value if pin is connected to uc GPIO
+ * 0 if gpio object was initialized with NC
+ */
+ int is_connected() {
+ return gpio_is_connected(&gpio);
+ }
+
#ifdef MBED_OPERATORS
/** A shorthand for write()
*/
--- a/Stream.h Thu Nov 27 13:33:22 2014 +0000
+++ b/Stream.h Tue Feb 03 15:31:20 2015 +0000
@@ -21,6 +21,10 @@
namespace mbed {
+extern void mbed_set_unbuffered_stream(FILE *_file);
+extern int mbed_getc(FILE *_file);
+extern char* mbed_gets(char *s, int size, FILE *_file);
+
class Stream : public FileLike {
public:
--- a/TARGET_ARCH_BLE/TARGET_NORDIC/TARGET_MCU_NRF51822/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_ARCH_BLE/TARGET_NORDIC/TARGET_MCU_NRF51822/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -45,6 +45,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_ARCH_BLE/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_ARCH_BLE/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_ARCH_BLE/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_ARCH_BLE/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_ARCH_BLE/TOOLCHAIN_ARM_STD/startup_nRF51822.o has changed
Binary file TARGET_ARCH_BLE/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_ARCH_BLE/TOOLCHAIN_ARM_STD/system_nrf51822.o has changed
Binary file TARGET_ARCH_BLE/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_ARCH_BLE/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_ARCH_BLE/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_ARCH_BLE/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_ARCH_BLE/TOOLCHAIN_GCC_ARM/system_nrf51822.o has changed
--- a/TARGET_ARCH_BLE/nrf51.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_ARCH_BLE/nrf51.h Tue Feb 03 15:31:20 2015 +0000 @@ -376,7 +376,8 @@ __IO uint32_t EVENTS_RXTO; /*!< Receiver timeout. */ __I uint32_t RESERVED5[46]; __IO uint32_t SHORTS; /*!< Shortcuts for TWI. */ - __I uint32_t RESERVED6[64]; + __I uint32_t RESERVED6[63]; + __IO uint32_t INTEN; /*!< Interrupt enable register. */ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ __I uint32_t RESERVED7[93]; @@ -1213,4 +1214,3 @@ #endif /* nRF51_H */ -
--- a/TARGET_ARCH_GPRS/TARGET_NXP/TARGET_LPC11UXX/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_ARCH_GPRS/TARGET_NXP/TARGET_LPC11UXX/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -45,6 +45,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_ARM_MICRO/startup_LPC11xx.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_ARM_MICRO/system_LPC11Uxx.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_ARM_STD/startup_LPC11xx.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_ARM_STD/system_LPC11Uxx.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_GCC_ARM/system_LPC11Uxx.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_GCC_CR/board.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_GCC_CR/cmsis_nvic.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_GCC_CR/retarget.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_GCC_CR/startup_LPC11xx.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_GCC_CR/system_LPC11Uxx.o has changed
--- a/TARGET_ARCH_GPRS/TOOLCHAIN_IAR/LPC11U37.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_ARCH_GPRS/TOOLCHAIN_IAR/LPC11U37.icf Tue Feb 03 15:31:20 2015 +0000
@@ -6,7 +6,9 @@
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x000000C0;
define symbol __ICFEDIT_region_ROM_end__ = 0x0001FFFF;
-define symbol __ICFEDIT_region_RAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_NVIC_start__ = 0x10000000;
+define symbol __ICFEDIT_region_NVIC_end__ = 0x100000BF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x100000C0;
define symbol __ICFEDIT_region_RAM_end__ = 0x10001FDF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
@@ -38,7 +40,7 @@
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
- block CSTACK, block HEAP };
+ block HEAP, block CSTACK };
place in CRP_region { section .crp };
place in URAM_region { section USB_PACKET_MEMORY };
place in SRAM1_region { section .SRAM1 };
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_IAR/startup_LPC11xx.o has changed
Binary file TARGET_ARCH_GPRS/TOOLCHAIN_IAR/system_LPC11Uxx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_ARCH_MAX/TARGET_STM/TARGET_STM32F4/PeripheralPins.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,66 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_PERIPHERALPINS_H +#define MBED_PERIPHERALPINS_H + +#include "pinmap.h" +#include "PeripheralNames.h" + +//*** ADC *** + +extern const PinMap PinMap_ADC[]; + +//*** DAC *** + +extern const PinMap PinMap_DAC[]; + +//*** I2C *** + +extern const PinMap PinMap_I2C_SDA[]; +extern const PinMap PinMap_I2C_SCL[]; + +//*** PWM *** + +extern const PinMap PinMap_PWM[]; + +//*** SERIAL *** + +extern const PinMap PinMap_UART_TX[]; +extern const PinMap PinMap_UART_RX[]; + +//*** SPI *** + +extern const PinMap PinMap_SPI_MOSI[]; +extern const PinMap PinMap_SPI_MISO[]; +extern const PinMap PinMap_SPI_SCLK[]; +extern const PinMap PinMap_SPI_SSEL[]; + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_ARCH_MAX/TARGET_STM/TARGET_STM32F4/TARGET_ARCH_MAX/PeripheralNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,88 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE
+} ADCName;
+
+typedef enum {
+ DAC_0 = 0,
+ DAC_1
+} DACName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE,
+ UART_3 = (int)USART3_BASE,
+ UART_4 = (int)UART4_BASE,
+ UART_5 = (int)UART5_BASE,
+ UART_6 = (int)USART6_BASE,
+} UARTName;
+
+#define STDIO_UART_TX PC_6
+#define STDIO_UART_RX PC_7
+#define STDIO_UART UART_6
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE,
+ SPI_3 = (int)SPI3_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE,
+ I2C_3 = (int)I2C3_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_2 = (int)TIM2_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_4 = (int)TIM4_BASE,
+ PWM_5 = (int)TIM5_BASE,
+ PWM_9 = (int)TIM9_BASE,
+ PWM_10 = (int)TIM10_BASE,
+ PWM_11 = (int)TIM11_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_ARCH_MAX/TARGET_STM/TARGET_STM32F4/TARGET_ARCH_MAX/PinNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,283 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_11 = 0x1B,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_0 = 0x30,
+ PD_1 = 0x31,
+ PD_2 = 0x32,
+ PD_3 = 0x33,
+ PD_4 = 0x34,
+ PD_5 = 0x35,
+ PD_6 = 0x36,
+ PD_7 = 0x37,
+ PD_8 = 0x38,
+ PD_9 = 0x39,
+ PD_10 = 0x3A,
+ PD_11 = 0x3B,
+ PD_12 = 0x3C,
+ PD_13 = 0x3D,
+ PD_14 = 0x3E,
+ PD_15 = 0x3F,
+
+ PE_0 = 0x40,
+ PE_1 = 0x41,
+ PE_2 = 0x42,
+ PE_3 = 0x43,
+ PE_4 = 0x44,
+ PE_5 = 0x45,
+ PE_6 = 0x46,
+ PE_7 = 0x47,
+ PE_8 = 0x48,
+ PE_9 = 0x49,
+ PE_10 = 0x4A,
+ PE_11 = 0x4B,
+ PE_12 = 0x4C,
+ PE_13 = 0x4D,
+ PE_14 = 0x4E,
+ PE_15 = 0x4F,
+
+ PF_0 = 0x50,
+ PF_1 = 0x51,
+ PF_2 = 0x52,
+ PF_3 = 0x53,
+ PF_4 = 0x54,
+ PF_5 = 0x55,
+ PF_6 = 0x56,
+ PF_7 = 0x57,
+ PF_8 = 0x58,
+ PF_9 = 0x59,
+ PF_10 = 0x5A,
+ PF_11 = 0x5B,
+ PF_12 = 0x5C,
+ PF_13 = 0x5D,
+ PF_14 = 0x5E,
+ PF_15 = 0x5F,
+
+ PG_0 = 0x60,
+ PG_1 = 0x61,
+ PG_2 = 0x62,
+ PG_3 = 0x63,
+ PG_4 = 0x64,
+ PG_5 = 0x65,
+ PG_6 = 0x66,
+ PG_7 = 0x67,
+ PG_8 = 0x68,
+ PG_9 = 0x69,
+ PG_10 = 0x6A,
+ PG_11 = 0x6B,
+ PG_12 = 0x6C,
+ PG_13 = 0x6D,
+ PG_14 = 0x6E,
+ PG_15 = 0x6F,
+
+ PH_0 = 0x70,
+ PH_1 = 0x71,
+ PH_2 = 0x72,
+ PH_3 = 0x73,
+ PH_4 = 0x74,
+ PH_5 = 0x75,
+ PH_6 = 0x76,
+ PH_7 = 0x77,
+ PH_8 = 0x78,
+ PH_9 = 0x79,
+ PH_10 = 0x7A,
+ PH_11 = 0x7B,
+ PH_12 = 0x7C,
+ PH_13 = 0x7D,
+ PH_14 = 0x7E,
+ PH_15 = 0x7F,
+
+ PI_0 = 0x80,
+ PI_1 = 0x81,
+ PI_2 = 0x82,
+ PI_3 = 0x83,
+ PI_4 = 0x84,
+ PI_5 = 0x85,
+ PI_6 = 0x86,
+ PI_7 = 0x87,
+ PI_8 = 0x88,
+ PI_9 = 0x89,
+ PI_10 = 0x8A,
+ PI_11 = 0x8B,
+ PI_12 = 0x8C,
+ PI_13 = 0x8D,
+ PI_14 = 0x8E,
+ PI_15 = 0x8F,
+
+
+ // Arduino connector namings
+ A0 = PA_0,
+ A1 = PA_3,
+ A2 = PA_4,
+ A3 = PA_5,
+ A4 = PA_6,
+ A5 = PB_0,
+ A6 = PB_1,
+ A7 = PC_0,
+ D0 = PD_3,
+ D1 = PD_6,
+ D2 = PD_11,
+ D3 = PD_12,
+ D4 = PD_13,
+ D5 = PA_8,
+ D6 = PB_6,
+ D7 = PB_7,
+ D8 = PB_15,
+ D9 = PB_14,
+ D10 = PA_15,
+ D11 = PB_5,
+ D12 = PB_4,
+ D13 = PB_3,
+ D14 = PB_9,
+ D15 = PB_8,
+
+ // Generic signals namings
+ LED1 = PB_3,
+ LED2 = PD_8,
+ LED3 = PD_9,
+ LED4 = PD_10,
+ USBTX = PC_6, /* USART6 */
+ USBRX = PC_7,
+ I2C_SCL = PB_8, /* I2C1 */
+ I2C_SDA = PB_9,
+ SPI_MOSI = PC_3,
+ SPI_MISO = PC_2,
+ SPI_SCK = PB_10,
+ SPI_CS = PE_3,
+ SD_MOSI = PC_3,
+ SD_MISO = PC_2,
+ SD_SCK = PB_10,
+ SD_CS = PE_2,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_ARCH_MAX/TARGET_STM/TARGET_STM32F4/TARGET_ARCH_MAX/PortNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,52 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortE = 4,
+ PortF = 5,
+ PortG = 6,
+ PortH = 7,
+ PortI = 8
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_ARCH_MAX/TARGET_STM/TARGET_STM32F4/TARGET_ARCH_MAX/device.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,70 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 1 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_ARCH_MAX/TARGET_STM/TARGET_STM32F4/TARGET_ARCH_MAX/objects.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,110 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+};
+
+struct dac_s {
+ DACName dac;
+ PinName channel;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index; // Used by irq
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+ uint32_t slave;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t period;
+ uint32_t pulse;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_ARCH_MAX/TARGET_STM/TARGET_STM32F4/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,75 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_GPIO_OBJECT_H
+#define MBED_GPIO_OBJECT_H
+
+#include "mbed_assert.h"
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ uint32_t mask;
+ __IO uint32_t *reg_in;
+ __IO uint16_t *reg_set;
+ __IO uint16_t *reg_clr;
+} gpio_t;
+
+static inline void gpio_write(gpio_t *obj, int value)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ if (value) {
+ *obj->reg_set = obj->mask;
+ } else {
+ *obj->reg_clr = obj->mask;
+ }
+}
+
+static inline int gpio_read(gpio_t *obj)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ return ((*obj->reg_in & obj->mask) ? 1 : 0);
+}
+
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- a/TARGET_ARCH_MAX/TARGET_STM/TARGET_STM32F407VG/PortNames.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,52 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortE = 4,
- PortF = 5,
- PortG = 6,
- PortH = 7,
- PortI = 8
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/TARGET_ARCH_MAX/TARGET_STM/TARGET_STM32F407VG/TARGET_ARCH_MAX/PeripheralNames.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,85 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- DAC_0 = 0,
- DAC_1
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_6 = (int)USART6_BASE
-} UARTName;
-
-#define STDIO_UART_TX PC_6
-#define STDIO_UART_RX PC_7
-#define STDIO_UART UART_6
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_9 = (int)TIM9_BASE,
- PWM_10 = (int)TIM10_BASE,
- PWM_11 = (int)TIM11_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/TARGET_ARCH_MAX/TARGET_STM/TARGET_STM32F407VG/TARGET_ARCH_MAX/PinNames.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,283 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_0 = 0x30,
- PD_1 = 0x31,
- PD_2 = 0x32,
- PD_3 = 0x33,
- PD_4 = 0x34,
- PD_5 = 0x35,
- PD_6 = 0x36,
- PD_7 = 0x37,
- PD_8 = 0x38,
- PD_9 = 0x39,
- PD_10 = 0x3A,
- PD_11 = 0x3B,
- PD_12 = 0x3C,
- PD_13 = 0x3D,
- PD_14 = 0x3E,
- PD_15 = 0x3F,
-
- PE_0 = 0x40,
- PE_1 = 0x41,
- PE_2 = 0x42,
- PE_3 = 0x43,
- PE_4 = 0x44,
- PE_5 = 0x45,
- PE_6 = 0x46,
- PE_7 = 0x47,
- PE_8 = 0x48,
- PE_9 = 0x49,
- PE_10 = 0x4A,
- PE_11 = 0x4B,
- PE_12 = 0x4C,
- PE_13 = 0x4D,
- PE_14 = 0x4E,
- PE_15 = 0x4F,
-
- PF_0 = 0x50,
- PF_1 = 0x51,
- PF_2 = 0x52,
- PF_3 = 0x53,
- PF_4 = 0x54,
- PF_5 = 0x55,
- PF_6 = 0x56,
- PF_7 = 0x57,
- PF_8 = 0x58,
- PF_9 = 0x59,
- PF_10 = 0x5A,
- PF_11 = 0x5B,
- PF_12 = 0x5C,
- PF_13 = 0x5D,
- PF_14 = 0x5E,
- PF_15 = 0x5F,
-
- PG_0 = 0x60,
- PG_1 = 0x61,
- PG_2 = 0x62,
- PG_3 = 0x63,
- PG_4 = 0x64,
- PG_5 = 0x65,
- PG_6 = 0x66,
- PG_7 = 0x67,
- PG_8 = 0x68,
- PG_9 = 0x69,
- PG_10 = 0x6A,
- PG_11 = 0x6B,
- PG_12 = 0x6C,
- PG_13 = 0x6D,
- PG_14 = 0x6E,
- PG_15 = 0x6F,
-
- PH_0 = 0x70,
- PH_1 = 0x71,
- PH_2 = 0x72,
- PH_3 = 0x73,
- PH_4 = 0x74,
- PH_5 = 0x75,
- PH_6 = 0x76,
- PH_7 = 0x77,
- PH_8 = 0x78,
- PH_9 = 0x79,
- PH_10 = 0x7A,
- PH_11 = 0x7B,
- PH_12 = 0x7C,
- PH_13 = 0x7D,
- PH_14 = 0x7E,
- PH_15 = 0x7F,
-
- PI_0 = 0x80,
- PI_1 = 0x81,
- PI_2 = 0x82,
- PI_3 = 0x83,
- PI_4 = 0x84,
- PI_5 = 0x85,
- PI_6 = 0x86,
- PI_7 = 0x87,
- PI_8 = 0x88,
- PI_9 = 0x89,
- PI_10 = 0x8A,
- PI_11 = 0x8B,
- PI_12 = 0x8C,
- PI_13 = 0x8D,
- PI_14 = 0x8E,
- PI_15 = 0x8F,
-
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_3,
- A2 = PA_4,
- A3 = PA_5,
- A4 = PA_6,
- A5 = PB_0,
- A6 = PB_1,
- A7 = PC_0,
- D0 = PD_3,
- D1 = PD_6,
- D2 = PD_11,
- D3 = PD_12,
- D4 = PD_13,
- D5 = PA_8,
- D6 = PB_6,
- D7 = PB_7,
- D8 = PB_15,
- D9 = PB_14,
- D10 = PA_15,
- D11 = PB_5,
- D12 = PB_4,
- D13 = PB_3,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = PB_3,
- LED2 = PD_8,
- LED3 = PD_9,
- LED4 = PD_10,
- USBTX = PC_6, /* USART6 */
- USBRX = PC_7,
- I2C_SCL = PB_8, /* I2C1 */
- I2C_SDA = PB_9,
- SPI_MOSI = PC_3,
- SPI_MISO = PC_2,
- SPI_SCK = PB_10,
- SPI_CS = PE_3,
- SD_MOSI = PC_3,
- SD_MISO = PC_2,
- SD_SCK = PB_10,
- SD_CS = PE_2,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/TARGET_ARCH_MAX/TARGET_STM/TARGET_STM32F407VG/TARGET_ARCH_MAX/device.h Thu Nov 27 13:33:22 2014 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 1 - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/TARGET_ARCH_MAX/TARGET_STM/TARGET_STM32F407VG/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,69 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_GPIO_OBJECT_H
-#define MBED_GPIO_OBJECT_H
-
-#include "mbed_assert.h"
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct {
- PinName pin;
- uint32_t mask;
- __IO uint32_t *reg_in;
- __IO uint16_t *reg_set;
- __IO uint16_t *reg_clr;
-} gpio_t;
-
-static inline void gpio_write(gpio_t *obj, int value) {
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (value) {
- *obj->reg_set = obj->mask;
- } else {
- *obj->reg_clr = obj->mask;
- }
-}
-
-static inline int gpio_read(gpio_t *obj) {
- MBED_ASSERT(obj->pin != (PinName)NC);
- return ((*obj->reg_in & obj->mask) ? 1 : 0);
-}
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/TARGET_ARCH_MAX/TARGET_STM/TARGET_STM32F407VG/objects.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,110 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
-};
-
-struct dac_s {
- DACName dac;
- PinName channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/startup_STM32F40x.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_can.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_crc.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_eth.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_irda.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nand.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nor.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rng.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sai.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sd.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_spi.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sram.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_uart.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_usart.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/stm32f4xx_ll_usb.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_ARM_STD/system_stm32f4xx.o has changed
--- a/TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/STM32F407.ld Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,157 +0,0 @@
-/* Linker script for STM32F407 */
-
-/* Linker script to configure memory regions. */
-MEMORY
-{
- FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
- CCM (rwx) : ORIGIN = 0x10000000, LENGTH = 64K
- RAM (rwx) : ORIGIN = 0x20000188, LENGTH = 128k - 0x188
-}
-
-/* Linker script to place sections and symbol values. Should be used together
- * with other linker script that defines memory regions FLASH and RAM.
- * It references following symbols, which must be defined in code:
- * Reset_Handler : Entry of reset handler
- *
- * It defines following symbols, which code can use without definition:
- * __exidx_start
- * __exidx_end
- * __etext
- * __data_start__
- * __preinit_array_start
- * __preinit_array_end
- * __init_array_start
- * __init_array_end
- * __fini_array_start
- * __fini_array_end
- * __data_end__
- * __bss_start__
- * __bss_end__
- * __end__
- * end
- * __HeapLimit
- * __StackLimit
- * __StackTop
- * __stack
- */
-ENTRY(Reset_Handler)
-
-SECTIONS
-{
- .text :
- {
- KEEP(*(.isr_vector))
- *(.text*)
- /* KEEP(.ioview) */
- KEEP(*(.init))
- KEEP(*(.fini))
-
- /* .ctors */
- *crtbegin.o(.ctors)
- *crtbegin?.o(.ctors)
- *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
- *(SORT(.ctors.*))
- *(.ctors)
-
- /* .dtors */
- *crtbegin.o(.dtors)
- *crtbegin?.o(.dtors)
- *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
- *(SORT(.dtors.*))
- *(.dtors)
-
- *(.rodata*)
-
- KEEP(*(.eh_frame*))
- } > FLASH
-
- .ARM.extab :
- {
- *(.ARM.extab* .gnu.linkonce.armextab.*)
- } > FLASH
-
- __exidx_start = .;
- .ARM.exidx :
- {
- *(.ARM.exidx* .gnu.linkonce.armexidx.*)
- } > FLASH
- __exidx_end = .;
-
- __etext = .;
- _sidata = .;
-
- .data : AT (__etext)
- {
- __data_start__ = .;
- _sdata = .;
- *(vtable)
- *(.data*)
-
- . = ALIGN(4);
- /* preinit data */
- PROVIDE_HIDDEN (__preinit_array_start = .);
- KEEP(*(.preinit_array))
- PROVIDE_HIDDEN (__preinit_array_end = .);
-
- . = ALIGN(4);
- /* init data */
- PROVIDE_HIDDEN (__init_array_start = .);
- KEEP(*(SORT(.init_array.*)))
- KEEP(*(.init_array))
- PROVIDE_HIDDEN (__init_array_end = .);
-
-
- . = ALIGN(4);
- /* finit data */
- PROVIDE_HIDDEN (__fini_array_start = .);
- KEEP(*(SORT(.fini_array.*)))
- KEEP(*(.fini_array))
- PROVIDE_HIDDEN (__fini_array_end = .);
-
- KEEP(*(.jcr*))
- . = ALIGN(4);
- /* All data end */
- __data_end__ = .;
- _edata = .;
-
- } > RAM
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start__ = .;
- _sbss = .;
- *(.bss*)
- *(COMMON)
- . = ALIGN(4);
- __bss_end__ = .;
- _ebss = .;
- } > RAM
-
- .heap (COPY):
- {
- __end__ = .;
- end = __end__;
- *(.heap*)
- __HeapLimit = .;
- } > RAM
-
- /* .stack_dummy section doesn't contains any symbols. It is only
- * used for linker to calculate size of stack sections, and assign
- * values to stack symbols later */
- .stack_dummy (COPY):
- {
- *(.stack*)
- } > RAM
-
- /* Set stack top to end of RAM, and stack limit move down by
- * size of stack_dummy section */
- __StackTop = ORIGIN(RAM) + LENGTH(RAM);
- _estack = __StackTop;
- __StackLimit = __StackTop - SIZEOF(.stack_dummy);
- PROVIDE(__stack = __StackTop);
-
- /* Check if data + heap + stack exceeds RAM limit */
- ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
-}
-
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/STM32F407XG.ld Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,154 @@
+/* Linker script to configure memory regions. */
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
+ CCM (rwx) : ORIGIN = 0x10000000, LENGTH = 64K
+ RAM (rwx) : ORIGIN = 0x20000188, LENGTH = 128k - 0x188
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ * _estack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.isr_vector))
+ *(.text*)
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+ _sidata = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ _sdata = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ KEEP(*(.jcr*))
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+ _edata = .;
+
+ } > RAM
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start__ = .;
+ _sbss = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ _ebss = .;
+ } > RAM
+
+ .heap (COPY):
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy (COPY):
+ {
+ *(.stack*)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ _estack = __StackTop;
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/hal_tick.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/startup_stm32f407xx.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_adc.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_can.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_crc.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dac.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dma.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_eth.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_flash.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_hash.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_irda.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_nand.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_nor.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rng.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_sai.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_sd.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_spi.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_sram.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_tim.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_uart.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_usart.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/stm32f4xx_ll_usb.o has changed
Binary file TARGET_ARCH_MAX/TOOLCHAIN_GCC_ARM/system_stm32f4xx.o has changed
--- a/TARGET_ARCH_MAX/stm32f4xx_hal_rcc.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_ARCH_MAX/stm32f4xx_hal_rcc.h Tue Feb 03 15:31:20 2015 +0000 @@ -530,6 +530,8 @@ #define __GPIOC_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOCEN)) #define __GPIOD_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIODEN)) #define __GPIOE_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOEEN)) +#define __GPIOF_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOFEN)) +#define __GPIOG_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOGEN)) #define __GPIOH_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOHEN)) #define __CRC_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_CRCEN)) #define __BKPSRAM_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_BKPSRAMEN)) @@ -542,6 +544,8 @@ #define __GPIOC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOCEN)) #define __GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) #define __GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) +#define __GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN)) +#define __GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN)) #define __GPIOH_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOHEN)) #define __CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) #define __BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
--- a/TARGET_ARCH_PRO/TARGET_NXP/TARGET_LPC176X/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_ARCH_PRO/TARGET_NXP/TARGET_LPC176X/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -45,6 +45,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_ARCH_PRO/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_ARM_STD/startup_LPC17xx.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_ARM_STD/system_LPC17xx.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_GCC_ARM/system_LPC17xx.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_GCC_CR/board.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_GCC_CR/cmsis_nvic.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_GCC_CR/retarget.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_GCC_CR/startup_LPC17xx.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_GCC_CR/system_LPC17xx.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_GCC_CS/board.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_GCC_CS/libmbed.a has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_GCC_CS/retarget.o has changed
--- a/TARGET_ARCH_PRO/TOOLCHAIN_IAR/LPC17xx.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_ARCH_PRO/TOOLCHAIN_IAR/LPC17xx.icf Tue Feb 03 15:31:20 2015 +0000
@@ -1,40 +1,44 @@
-/* [ROM] */
-define symbol __intvec_start__ = 0x00000000;
-define symbol __region_ROM_start__ = 0x00000000;
-define symbol __CRP_start__ = 0x000002FC;
-define symbol __CRP_end__ = 0x000002FF;
-define symbol __region_ROM_end__ = 0x0007FFFF;
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x0007FFFF;
+define symbol __ICFEDIT_region_NVIC_start__ = 0x10000000;
+define symbol __ICFEDIT_region_NVIC_end__ = 0x100000C7;
+define symbol __ICFEDIT_region_RAM_start__ = 0x100000C8;
+define symbol __ICFEDIT_region_RAM_end__ = 0x10007FDF;
-/* [RAM] Vector table dynamic copy: 8_byte_aligned(49 vect * 4 bytes) = 8_byte_aligned(0xC4) = 0xC8*/
-define symbol __NVIC_start__ = 0x10000000;
-define symbol __NVIC_end__ = 0x100000C7;
-define symbol __region_RAM_start__ = 0x100000C8;
-define symbol __region_RAM_end__ = 0x10007FDF;
-define symbol _AHB_RAM_start__ = 0x2007C000;
-define symbol _AHB_RAM_end__ = 0x20083FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x800;
+define symbol __ICFEDIT_size_heap__ = 0x1000;
+/**** End of ICF editor section. ###ICF###*/
-/* Memory regions */
-define memory mem with size = 4G;
+define symbol __CRP_start__ = 0x000002FC;
+define symbol __CRP_end__ = 0x000002FF;
-define region ROM_region = mem:[from __region_ROM_start__ to __region_ROM_end__] - mem:[from __CRP_start__ to __CRP_end__];
-define region CRP_region = mem:[from __CRP_start__ to __CRP_end__];
-
-define region RAM_region = mem:[from __region_RAM_start__ to __region_RAM_end__];
-define region AHB_RAM_region = mem:[from _AHB_RAM_start__ to _AHB_RAM_end__];
+define symbol __RAM1_start__ = 0x2007C000;
+define symbol __RAM1_end__ = 0x20083FFF;
-/* Stack and Heap */
-define symbol __size_cstack__ = 0x800;
-define symbol __size_heap__ = 0x800;
-define block CSTACK with alignment = 8, size = __size_cstack__ { };
-define block HEAP with alignment = 8, size = __size_heap__ { };
-define block STACKHEAP with fixed order { block HEAP, block CSTACK };
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__] - mem:[from __CRP_start__ to __CRP_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+define region CRP_region = mem:[from __CRP_start__ to __CRP_end__];
+define region RAM1_region = mem:[from __RAM1_start__ to __RAM1_end__];
-initialize by copy with packing = zeros { readwrite };
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+
+initialize by copy { readwrite };
do not initialize { section .noinit };
-place at address mem:__intvec_start__ { section .intvec };
-place at address mem:0x2FC { section CRPKEY };
-place in ROM_region { readonly };
-place in RAM_region { readwrite, block STACKHEAP };
-place in AHB_RAM_region { section USB_RAM };
-place in CRP_region { section .crp };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block HEAP, block CSTACK };
+
+place in CRP_region { section .crp };
+place in RAM1_region { section USB_RAM };
Binary file TARGET_ARCH_PRO/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_IAR/startup_LPC17xx.o has changed
Binary file TARGET_ARCH_PRO/TOOLCHAIN_IAR/system_LPC17xx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/nrf-sdk/app_common/app_button.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,187 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup app_button Button Handler
+ * @{
+ * @ingroup app_common
+ *
+ * @brief Buttons handling module.
+ *
+ * @details The button handler uses the @ref app_gpiote to detect that a button has been
+ * pushed. To handle debouncing, it will start a timer in the GPIOTE event handler.
+ * The button will only be reported as pushed if the corresponding pin is still active when
+ * the timer expires. If there is a new GPIOTE event while the timer is running, the timer
+ * is restarted.
+ * Use the USE_SCHEDULER parameter of the APP_BUTTON_INIT() macro to select if the
+ * @ref app_scheduler is to be used or not.
+ *
+ * @note The app_button module uses the app_timer module. The user must ensure that the queue in
+ * app_timer is large enough to hold the app_timer_stop() / app_timer_start() operations
+ * which will be executed on each event from GPIOTE module (2 operations), as well as other
+ * app_timer operations queued simultaneously in the application.
+ *
+ * @note Even if the scheduler is not used, app_button.h will include app_scheduler.h, so when
+ * compiling, app_scheduler.h must be available in one of the compiler include paths.
+ */
+
+#ifndef APP_BUTTON_H__
+#define APP_BUTTON_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "app_error.h"
+#include "app_scheduler.h"
+#include "nrf_gpio.h"
+
+#define APP_BUTTON_SCHED_EVT_SIZE sizeof(app_button_event_t) /**< Size of button events being passed through the scheduler (is to be used for computing the maximum size of scheduler events). */
+#define APP_BUTTON_PUSH 1 /**< Indicates that a button is pushed. */
+#define APP_BUTTON_RELEASE 0 /**< Indicates that a button is released. */
+#define APP_BUTTON_ACTIVE_HIGH 1 /**< Indicates that a button is active high. */
+#define APP_BUTTON_ACTIVE_LOW 0 /**< Indicates that a button is active low. */
+
+/**@brief Button event handler type. */
+typedef void (*app_button_handler_t)(uint8_t pin_no, uint8_t button_action);
+
+/**@brief Type of function for passing events from the Button Handler module to the scheduler. */
+typedef uint32_t (*app_button_evt_schedule_func_t) (app_button_handler_t button_handler,
+ uint8_t pin_no,
+ uint8_t button_action);
+
+/**@brief Button configuration structure. */
+typedef struct
+{
+ uint8_t pin_no; /**< Pin to be used as a button. */
+ uint8_t active_state; /**< APP_BUTTON_ACTIVE_HIGH or APP_BUTTON_ACTIVE_LOW. */
+ nrf_gpio_pin_pull_t pull_cfg; /**< Pull-up or -down configuration. */
+ app_button_handler_t button_handler; /**< Handler to be called when button is pushed. */
+} app_button_cfg_t;
+
+/**@brief Pin transition direction struct. */
+typedef struct
+{
+ uint32_t high_to_low; /**Pin went from high to low */
+ uint32_t low_to_high; /**Pin went from low to high */
+} pin_transition_t;
+
+/**@brief Macro for initializing the Button Handler module.
+ *
+ * @details It will initialize the specified pins as buttons, and configure the Button Handler
+ * module as a GPIOTE user (but it will not enable button detection). It will also connect
+ * the Button Handler module to the scheduler (if specified).
+ *
+ * @param[in] BUTTONS Array of buttons to be used (type app_button_cfg_t, must be
+ * static!).
+ * @param[in] BUTTON_COUNT Number of buttons.
+ * @param[in] DETECTION_DELAY Delay from a GPIOTE event until a button is reported as pushed.
+ * @param[in] USE_SCHEDULER TRUE if the application is using the event scheduler,
+ * FALSE otherwise.
+ */
+/*lint -emacro(506, APP_BUTTON_INIT) */ /* Suppress "Constant value Boolean */
+#define APP_BUTTON_INIT(BUTTONS, BUTTON_COUNT, DETECTION_DELAY, USE_SCHEDULER) \
+ do \
+ { \
+ uint32_t ERR_CODE = app_button_init((BUTTONS), \
+ (BUTTON_COUNT), \
+ (DETECTION_DELAY), \
+ (USE_SCHEDULER) ? app_button_evt_schedule : NULL); \
+ APP_ERROR_CHECK(ERR_CODE); \
+ } while (0)
+
+/**@brief Function for initializing the Buttons.
+ *
+ * @details This function will initialize the specified pins as buttons, and configure the Button
+ * Handler module as a GPIOTE user (but it will not enable button detection).
+ *
+ * @note Normally initialization should be done using the APP_BUTTON_INIT() macro, as that will take
+ * care of connecting the Buttons module to the scheduler (if specified).
+ *
+ * @note app_button_enable() function must be called in order to enable the button detection.
+ *
+ * @param[in] p_buttons Array of buttons to be used (NOTE: Must be static!).
+ * @param[in] button_count Number of buttons.
+ * @param[in] detection_delay Delay from a GPIOTE event until a button is reported as pushed.
+ * @param[in] evt_schedule_func Function for passing button events to the scheduler. Point to
+ * app_button_evt_schedule() to connect to the scheduler. Set to
+ * NULL to make the Buttons module call the event handler directly
+ * from the delayed button push detection timeout handler.
+ *
+ * @return NRF_SUCCESS on success, otherwise an error code.
+ */
+uint32_t app_button_init(app_button_cfg_t * p_buttons,
+ uint8_t button_count,
+ uint32_t detection_delay,
+ app_button_evt_schedule_func_t evt_schedule_func);
+
+/**@brief Function for enabling button detection.
+ *
+ * @retval NRF_ERROR_INVALID_PARAM GPIOTE has to many users.
+ * @retval NRF_ERROR_INVALID_STATE Button or GPIOTE not initialized.
+ * @retval NRF_SUCCESS Button detection successfully enabled.
+ */
+uint32_t app_button_enable(void);
+
+/**@brief Function for disabling button detection.
+ *
+ * @retval NRF_ERROR_INVALID_PARAM GPIOTE has to many users.
+ * @retval NRF_ERROR_INVALID_STATE Button or GPIOTE not initialized.
+ * @retval NRF_SUCCESS Button detection successfully enabled.
+ */
+uint32_t app_button_disable(void);
+
+/**@brief Function for checking if a button is currently being pushed.
+ *
+ * @param[in] pin_no Button pin to be checked.
+ * @param[out] p_is_pushed Button state.
+ *
+ * @retval NRF_SUCCESS State successfully read.
+ * @retval NRF_ERROR_INVALID_PARAM Invalid pin_no.
+ */
+uint32_t app_button_is_pushed(uint8_t pin_no, bool * p_is_pushed);
+
+
+// Type and functions for connecting the Buttons module to the scheduler:
+
+/**@cond NO_DOXYGEN */
+typedef struct
+{
+ app_button_handler_t button_handler;
+ uint8_t pin_no;
+ uint8_t button_action;
+} app_button_event_t;
+
+static __INLINE void app_button_evt_get(void * p_event_data, uint16_t event_size)
+{
+ app_button_event_t * p_buttons_event = (app_button_event_t *)p_event_data;
+
+ APP_ERROR_CHECK_BOOL(event_size == sizeof(app_button_event_t));
+ p_buttons_event->button_handler(p_buttons_event->pin_no, p_buttons_event->button_action);
+}
+
+static __INLINE uint32_t app_button_evt_schedule(app_button_handler_t button_handler,
+ uint8_t pin_no,
+ uint8_t button_action)
+{
+ app_button_event_t buttons_event;
+
+ buttons_event.button_handler = button_handler;
+ buttons_event.pin_no = pin_no;
+ buttons_event.button_action = button_action;
+
+ return app_sched_event_put(&buttons_event, sizeof(buttons_event), app_button_evt_get);
+}
+/**@endcond */
+
+#endif // APP_BUTTON_H__
+
+/** @} */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/nrf-sdk/app_common/app_error.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,84 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup app_error Common application error handler
+ * @{
+ * @ingroup app_common
+ *
+ * @brief Common application error handler and macros for utilizing a common error handler.
+ */
+
+#ifndef APP_ERROR_H__
+#define APP_ERROR_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "nrf_error.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**@brief Function for error handling, which is called when an error has occurred.
+ *
+ * @param[in] error_code Error code supplied to the handler.
+ * @param[in] line_num Line number where the handler is called.
+ * @param[in] p_file_name Pointer to the file name.
+ */
+void app_error_handler(uint32_t error_code, uint32_t line_num, const uint8_t * p_file_name);
+
+#ifdef __cplusplus
+}
+#endif
+
+/**@brief Macro for calling error handler function.
+ *
+ * @param[in] ERR_CODE Error code supplied to the error handler.
+ */
+#define APP_ERROR_HANDLER(ERR_CODE) \
+ do \
+ { \
+ /* app_error_handler((ERR_CODE), __LINE__, (uint8_t*) __FILE__); */ \
+ } while (0)
+
+/**@brief Macro for calling error handler function if supplied error code any other than NRF_SUCCESS.
+ *
+ * @param[in] ERR_CODE Error code supplied to the error handler.
+ */
+#define APP_ERROR_CHECK(ERR_CODE) \
+ do \
+ { \
+ const uint32_t LOCAL_ERR_CODE = (ERR_CODE); \
+ if (LOCAL_ERR_CODE != NRF_SUCCESS) \
+ { \
+ APP_ERROR_HANDLER(LOCAL_ERR_CODE); \
+ } \
+ } while (0)
+
+/**@brief Macro for calling error handler function if supplied boolean value is false.
+ *
+ * @param[in] BOOLEAN_VALUE Boolean value to be evaluated.
+ */
+#define APP_ERROR_CHECK_BOOL(BOOLEAN_VALUE) \
+ do \
+ { \
+ const bool LOCAL_BOOLEAN_VALUE = (BOOLEAN_VALUE); \
+ if (!LOCAL_BOOLEAN_VALUE) \
+ { \
+ APP_ERROR_HANDLER(0); \
+ } \
+ } while (0)
+
+#endif // APP_ERROR_H__
+
+/** @} */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/nrf-sdk/app_common/app_fifo.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,83 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/**@file
+ *
+ * @defgroup app_fifo FIFO implementation
+ * @{
+ * @ingroup app_common
+ *
+ * @brief FIFO implementation.
+ */
+
+#ifndef APP_FIFO_H__
+#define APP_FIFO_H__
+
+#include <stdint.h>
+#include <stdlib.h>
+#include "nrf_error.h"
+
+/**@brief A FIFO instance structure. Keeps track of which bytes to read and write next.
+ * Also it keeps the information about which memory is allocated for the buffer
+ * and its size. This needs to be initialized by app_fifo_init() before use.
+ */
+typedef struct
+{
+ uint8_t * p_buf; /**< Pointer to FIFO buffer memory. */
+ uint16_t buf_size_mask; /**< Read/write index mask. Also used for size checking. */
+ volatile uint32_t read_pos; /**< Next read position in the FIFO buffer. */
+ volatile uint32_t write_pos; /**< Next write position in the FIFO buffer. */
+} app_fifo_t;
+
+/**@brief Function for initializing the FIFO.
+ *
+ * @param[out] p_fifo FIFO object.
+ * @param[in] p_buf FIFO buffer for storing data. The buffer size has to be a power of two.
+ * @param[in] buf_size Size of the FIFO buffer provided, has to be a power of 2.
+ *
+ * @retval NRF_SUCCESS If initialization was successful.
+ * @retval NRF_ERROR_NULL If a NULL pointer is provided as buffer.
+ * @retval NRF_ERROR_INVALID_LENGTH If size of buffer provided is not a power of two.
+ */
+uint32_t app_fifo_init(app_fifo_t * p_fifo, uint8_t * p_buf, uint16_t buf_size);
+
+/**@brief Function for adding an element to the FIFO.
+ *
+ * @param[in] p_fifo Pointer to the FIFO.
+ * @param[in] byte Data byte to add to the FIFO.
+ *
+ * @retval NRF_SUCCESS If an element has been successfully added to the FIFO.
+ * @retval NRF_ERROR_NO_MEM If the FIFO is full.
+ */
+uint32_t app_fifo_put(app_fifo_t * p_fifo, uint8_t byte);
+
+/**@brief Function for getting the next element from the FIFO.
+ *
+ * @param[in] p_fifo Pointer to the FIFO.
+ * @param[out] p_byte Byte fetched from the FIFO.
+ *
+ * @retval NRF_SUCCESS If an element was returned.
+ * @retval NRF_ERROR_NOT_FOUND If there is no more elements in the queue.
+ */
+uint32_t app_fifo_get(app_fifo_t * p_fifo, uint8_t * p_byte);
+
+/**@brief Function for flushing the FIFO.
+ *
+ * @param[in] p_fifo Pointer to the FIFO.
+ *
+ * @retval NRF_SUCCESS If the FIFO flushed successfully.
+ */
+uint32_t app_fifo_flush(app_fifo_t * p_fifo);
+
+#endif // APP_FIFO_H__
+
+/** @} */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/nrf-sdk/app_common/app_gpiote.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,226 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup app_gpiote GPIOTE Handler
+ * @{
+ * @ingroup app_common
+ *
+ * @brief GPIOTE handler module.
+ *
+ * @details The GPIOTE handler allows several modules ("users") to share the GPIOTE interrupt,
+ * each user defining a set of pins able to generate events to the user.
+ * When a GPIOTE interrupt occurs, the GPIOTE interrupt handler will call the event handler
+ * of each user for which at least one of the pins generated an event.
+ *
+ * The GPIOTE users are responsible for configuring all their corresponding pins, except
+ * the SENSE field, which should be initialized to GPIO_PIN_CNF_SENSE_Disabled.
+ * The SENSE field will be updated by the GPIOTE module when it is enabled or disabled,
+ * and also while it is enabled.
+ *
+ * The module specifies on which pins events should be generated if the pin(s) goes
+ * from low->high or high->low or both directions.
+ *
+ * @note Even if the application is using the @ref app_scheduler, the GPIOTE event handlers will
+ * be called directly from the GPIOTE interrupt handler.
+ *
+ * @warning If multiple users registers for the same pins the behavior for those pins are undefined.
+ */
+
+#ifndef APP_GPIOTE_H__
+#define APP_GPIOTE_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+// #include "nrf.h"
+#include "app_error.h"
+#include "app_util.h"
+
+#ifdef __cpluplus
+extern "C" {
+#endif
+
+#define GPIOTE_USER_NODE_SIZE 20 /**< Size of app_gpiote.gpiote_user_t (only for use inside APP_GPIOTE_BUF_SIZE()). */
+#define NO_OF_PINS 32 /**< Number of GPIO pins on the nRF51 chip. */
+
+/**@brief Compute number of bytes required to hold the GPIOTE data structures.
+ *
+ * @param[in] MAX_USERS Maximum number of GPIOTE users.
+ *
+ * @return Required buffer size (in bytes).
+ */
+#define APP_GPIOTE_BUF_SIZE(MAX_USERS) ((MAX_USERS) * GPIOTE_USER_NODE_SIZE)
+
+typedef uint8_t app_gpiote_user_id_t;
+
+/**@brief GPIOTE event handler type. */
+typedef void (*app_gpiote_event_handler_t)(uint32_t event_pins_low_to_high,
+ uint32_t event_pins_high_to_low);
+
+/**@brief GPIOTE input event handler type. */
+typedef void (*app_gpiote_input_event_handler_t)(void);
+
+/**@brief Macro for initializing the GPIOTE module.
+ *
+ * @details It will handle dimensioning and allocation of the memory buffer required by the module,
+ * making sure that the buffer is correctly aligned.
+ *
+ * @param[in] MAX_USERS Maximum number of GPIOTE users.
+ *
+ * @note Since this macro allocates a buffer, it must only be called once (it is OK to call it
+ * several times as long as it is from the same location, e.g. to do a reinitialization).
+ */
+/*lint -emacro(506, APP_GPIOTE_INIT) */ /* Suppress "Constant value Boolean */
+#define APP_GPIOTE_INIT(MAX_USERS) \
+ do \
+ { \
+ static uint32_t app_gpiote_buf[CEIL_DIV(APP_GPIOTE_BUF_SIZE(MAX_USERS), sizeof(uint32_t))];\
+ uint32_t ERR_CODE = app_gpiote_init((MAX_USERS), app_gpiote_buf); \
+ APP_ERROR_CHECK(ERR_CODE); \
+ } while (0)
+
+/**@brief Function for initializing the GPIOTE module.
+ *
+ * @note Normally initialization should be done using the APP_GPIOTE_INIT() macro, as that will
+ * allocate the buffer needed by the GPIOTE module (including aligning the buffer correctly).
+ *
+ * @param[in] max_users Maximum number of GPIOTE users.
+ * @param[in] p_buffer Pointer to memory buffer for internal use in the app_gpiote
+ * module. The size of the buffer can be computed using the
+ * APP_GPIOTE_BUF_SIZE() macro. The buffer must be aligned to
+ * a 4 byte boundary.
+ *
+ * @retval NRF_SUCCESS Successful initialization.
+ * @retval NRF_ERROR_INVALID_PARAM Invalid parameter (buffer not aligned to a 4 byte
+ * boundary).
+ */
+uint32_t app_gpiote_init(uint8_t max_users, void * p_buffer);
+
+/**@brief Function for registering a GPIOTE user.
+ *
+ * @param[out] p_user_id Id for the new GPIOTE user.
+ * @param[in] pins_low_to_high_mask Mask defining which pins will generate events to this user
+ * when state is changed from low->high.
+ * @param[in] pins_high_to_low_mask Mask defining which pins will generate events to this user
+ * when state is changed from high->low.
+ * @param[in] event_handler Pointer to function to be executed when an event occurs.
+ *
+ * @retval NRF_SUCCESS Successful initialization.
+ * @retval NRF_ERROR_INVALID_PARAM Invalid parameter (buffer not aligned to a 4 byte boundary).
+ * @retval NRF_ERROR_INALID_STATE If @ref app_gpiote_init has not been called on the GPIOTE
+ * module.
+ * @retval NRF_ERROR_NO_MEM Returned if the application tries to register more users
+ * than defined when the GPIOTE module was initialized in
+ * @ref app_gpiote_init.
+ */
+uint32_t app_gpiote_user_register(app_gpiote_user_id_t * p_user_id,
+ uint32_t pins_low_to_high_mask,
+ uint32_t pins_high_to_low_mask,
+ app_gpiote_event_handler_t event_handler);
+
+/**@brief Function for informing the GPIOTE module that the specified user wants to use the GPIOTE module.
+ *
+ * @param[in] user_id Id of user to enable.
+ *
+ * @retval NRF_SUCCESS On success.
+ * @retval NRF_ERROR_INVALID_PARAM Invalid user_id provided, No a valid user.
+ * @retval NRF_ERROR_INALID_STATE If @ref app_gpiote_init has not been called on the GPIOTE
+ * module.
+ */
+uint32_t app_gpiote_user_enable(app_gpiote_user_id_t user_id);
+
+/**@brief Function for informing the GPIOTE module that the specified user is done using the GPIOTE module.
+ *
+ * @param[in] user_id Id of user to enable.
+ *
+ * @return NRF_SUCCESS On success.
+ * @retval NRF_ERROR_INVALID_PARAM Invalid user_id provided, No a valid user.
+ * @retval NRF_ERROR_INALID_STATE If @ref app_gpiote_init has not been called on the GPIOTE
+ * module.
+ */
+uint32_t app_gpiote_user_disable(app_gpiote_user_id_t user_id);
+
+/**@brief Function for getting the state of the pins which are registered for the specified user.
+ *
+ * @param[in] user_id Id of user to check.
+ * @param[out] p_pins Bit mask corresponding to the pins configured to generate events to
+ * the specified user. All bits corresponding to pins in the state
+ * 'high' will have value '1', all others will have value '0'.
+ *
+ * @return NRF_SUCCESS On success.
+ * @retval NRF_ERROR_INVALID_PARAM Invalid user_id provided, No a valid user.
+ * @retval NRF_ERROR_INALID_STATE If @ref app_gpiote_init has not been called on the GPIOTE
+ * module.
+ */
+uint32_t app_gpiote_pins_state_get(app_gpiote_user_id_t user_id, uint32_t * p_pins);
+
+/**@brief Function for registering event handlers for GPIOTE IN events.
+ *
+ * @param[in] channel GPIOTE channel [0..3].
+ * @param[in] pin Pins associated with GPIOTE channel. Changes on following pins will generate events.
+ * @param[in] polarity Specify operation on input that shall trigger IN event.
+ * @param[in] event_handler Event handler invoked on the IN event in the GPIOTE interrupt.
+ *
+ * @return NRF_SUCCESS On success.
+ * @retval NRF_ERROR_INVALID_PARAM Invalid channel or pin number.
+ * @retval NRF_ERROR_NOT_SUPPORTED Driver doesn't support IN events.
+ */
+uint32_t app_gpiote_input_event_handler_register(const uint8_t channel,
+ const uint32_t pin,
+ const uint32_t polarity,
+ app_gpiote_input_event_handler_t event_handler);
+
+/**@brief Function for unregistering event handlers for GPIOTE IN events.
+ *
+ * @return NRF_SUCCESS On success.
+ * @retval NRF_ERROR_NOT_SUPPORTED Driver doesn't support IN events.
+ */
+uint32_t app_gpiote_input_event_handler_unregister(const uint8_t channel);
+
+/**@brief Function for registering event handler invoked at the end of a GPIOTE interrupt.
+ *
+ * @param[in] event_handler Event handler invoked at the end of the GPIOTE interrupt.
+ *
+ * @return NRF_SUCCESS On success.
+ * @retval NRF_ERROR_NOT_SUPPORTED Driver doesn't support IN events.
+ */
+uint32_t app_gpiote_end_irq_event_handler_register(app_gpiote_input_event_handler_t event_handler);
+
+/**@brief Function for unregistering event handler invoked at the end of a GPIOTE interrupt.
+ *
+ * @return NRF_SUCCESS On success.
+ * @retval NRF_ERROR_NOT_SUPPORTED Driver doesn't support IN events.
+ */
+uint32_t app_gpiote_end_irq_event_handler_unregister(void);
+
+/**@brief Function for enabling interrupts in the GPIOTE driver.
+ *
+ * @return NRF_SUCCESS On success.
+ * @retval NRF_ERROR_NOT_SUPPORTED Driver doesn't support.
+ */
+uint32_t app_gpiote_enable_interrupts(void);
+
+/**@brief Function for disabling interrupts in the GPIOTE driver.
+ *
+ * @return NRF_SUCCESS On success.
+ * @retval NRF_ERROR_NOT_SUPPORTED Driver doesn't support.
+ */
+uint32_t app_gpiote_disable_interrupts(void);
+
+#ifdef __cpluplus
+}
+#endif
+
+#endif // APP_GPIOTE_H__
+
+/** @} */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/nrf-sdk/app_common/app_scheduler.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,134 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup app_scheduler Scheduler
+ * @{
+ * @ingroup app_common
+ *
+ * @brief The scheduler is used for transferring execution from the interrupt context to the main
+ * context.
+ *
+ * @details See @ref ble_sdk_apps_seq_diagrams for sequence diagrams illustrating the flow of events
+ * when using the Scheduler.
+ *
+ * @section app_scheduler_req Requirements:
+ *
+ * @subsection main_context_logic Logic in main context:
+ *
+ * - Define an event handler for each type of event expected.
+ * - Initialize the scheduler by calling the APP_SCHED_INIT() macro before entering the
+ * application main loop.
+ * - Call app_sched_execute() from the main loop each time the application wakes up because of an
+ * event (typically when sd_app_evt_wait() returns).
+ *
+ * @subsection int_context_logic Logic in interrupt context:
+ *
+ * - In the interrupt handler, call app_sched_event_put()
+ * with the appropriate data and event handler. This will insert an event into the
+ * scheduler's queue. The app_sched_execute() function will pull this event and call its
+ * handler in the main context.
+ *
+ * For an example usage of the scheduler, please see the implementations of
+ * @ref ble_sdk_app_hids_mouse and @ref ble_sdk_app_hids_keyboard.
+ *
+ * @image html scheduler_working.jpg The high level design of the scheduler
+ */
+
+#ifndef APP_SCHEDULER_H__
+#define APP_SCHEDULER_H__
+
+#include <stdint.h>
+#include "app_error.h"
+
+#define APP_SCHED_EVENT_HEADER_SIZE 8 /**< Size of app_scheduler.event_header_t (only for use inside APP_SCHED_BUF_SIZE()). */
+
+/**@brief Compute number of bytes required to hold the scheduler buffer.
+ *
+ * @param[in] EVENT_SIZE Maximum size of events to be passed through the scheduler.
+ * @param[in] QUEUE_SIZE Number of entries in scheduler queue (i.e. the maximum number of events
+ * that can be scheduled for execution).
+ *
+ * @return Required scheduler buffer size (in bytes).
+ */
+#define APP_SCHED_BUF_SIZE(EVENT_SIZE, QUEUE_SIZE) \
+ (((EVENT_SIZE) + APP_SCHED_EVENT_HEADER_SIZE) * ((QUEUE_SIZE) + 1))
+
+/**@brief Scheduler event handler type. */
+typedef void (*app_sched_event_handler_t)(void * p_event_data, uint16_t event_size);
+
+/**@brief Macro for initializing the event scheduler.
+ *
+ * @details It will also handle dimensioning and allocation of the memory buffer required by the
+ * scheduler, making sure the buffer is correctly aligned.
+ *
+ * @param[in] EVENT_SIZE Maximum size of events to be passed through the scheduler.
+ * @param[in] QUEUE_SIZE Number of entries in scheduler queue (i.e. the maximum number of events
+ * that can be scheduled for execution).
+ *
+ * @note Since this macro allocates a buffer, it must only be called once (it is OK to call it
+ * several times as long as it is from the same location, e.g. to do a reinitialization).
+ */
+#define APP_SCHED_INIT(EVENT_SIZE, QUEUE_SIZE) \
+ do \
+ { \
+ static uint32_t APP_SCHED_BUF[CEIL_DIV(APP_SCHED_BUF_SIZE((EVENT_SIZE), (QUEUE_SIZE)), \
+ sizeof(uint32_t))]; \
+ uint32_t ERR_CODE = app_sched_init((EVENT_SIZE), (QUEUE_SIZE), APP_SCHED_BUF); \
+ APP_ERROR_CHECK(ERR_CODE); \
+ } while (0)
+
+/**@brief Function for initializing the Scheduler.
+ *
+ * @details It must be called before entering the main loop.
+ *
+ * @param[in] max_event_size Maximum size of events to be passed through the scheduler.
+ * @param[in] queue_size Number of entries in scheduler queue (i.e. the maximum number of
+ * events that can be scheduled for execution).
+ * @param[in] p_event_buffer Pointer to memory buffer for holding the scheduler queue. It must
+ * be dimensioned using the APP_SCHED_BUFFER_SIZE() macro. The buffer
+ * must be aligned to a 4 byte boundary.
+ *
+ * @note Normally initialization should be done using the APP_SCHED_INIT() macro, as that will both
+ * allocate the scheduler buffer, and also align the buffer correctly.
+ *
+ * @retval NRF_SUCCESS Successful initialization.
+ * @retval NRF_ERROR_INVALID_PARAM Invalid parameter (buffer not aligned to a 4 byte
+ * boundary).
+ */
+uint32_t app_sched_init(uint16_t max_event_size, uint16_t queue_size, void * p_evt_buffer);
+
+/**@brief Function for executing all scheduled events.
+ *
+ * @details This function must be called from within the main loop. It will execute all events
+ * scheduled since the last time it was called.
+ */
+void app_sched_execute(void);
+
+/**@brief Function for scheduling an event.
+ *
+ * @details Puts an event into the event queue.
+ *
+ * @param[in] p_event_data Pointer to event data to be scheduled.
+ * @param[in] p_event_size Size of event data to be scheduled.
+ * @param[in] handler Event handler to receive the event.
+ *
+ * @return NRF_SUCCESS on success, otherwise an error code.
+ */
+uint32_t app_sched_event_put(void * p_event_data,
+ uint16_t event_size,
+ app_sched_event_handler_t handler);
+
+#endif // APP_SCHEDULER_H__
+
+/** @} */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/nrf-sdk/app_common/app_timer.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,313 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup app_timer Application Timer
+ * @{
+ * @ingroup app_common
+ *
+ * @brief Application timer functionality.
+ *
+ * @details It enables the application to create multiple timer instances based on the RTC1
+ * peripheral. Checking for timeouts and invokation of user timeout handlers is performed
+ * in the RTC1 interrupt handler. List handling is done using a software interrupt (SWI0).
+ * Both interrupt handlers are running in APP_LOW priority level.
+ *
+ * @note When calling app_timer_start() or app_timer_stop(), the timer operation is just queued,
+ * and the software interrupt is triggered. The actual timer start/stop operation is
+ * executed by the SWI0 interrupt handler. Since the SWI0 interrupt is running in APP_LOW,
+ * if the application code calling the timer function is running in APP_LOW or APP_HIGH,
+ * the timer operation will not be performed until the application handler has returned.
+ * This will be the case e.g. when stopping a timer from a timeout handler when not using
+ * the scheduler.
+ *
+ * @details Use the USE_SCHEDULER parameter of the APP_TIMER_INIT() macro to select if the
+ * @ref app_scheduler is to be used or not.
+ *
+ * @note Even if the scheduler is not used, app_timer.h will include app_scheduler.h, so when
+ * compiling, app_scheduler.h must be available in one of the compiler include paths.
+ */
+
+#ifndef APP_TIMER_H__
+#define APP_TIMER_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include "app_error.h"
+#include "app_util.h"
+#include "app_scheduler.h"
+#include "compiler_abstraction.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif // #ifdef __cplusplus
+
+#define APP_TIMER_SCHED_EVT_SIZE sizeof(app_timer_event_t) /**< Size of button events being passed through the scheduler (is to be used for computing the maximum size of scheduler events). */
+#define APP_TIMER_CLOCK_FREQ 32768 /**< Clock frequency of the RTC timer used to implement the app timer module. */
+#define APP_TIMER_MIN_TIMEOUT_TICKS 5 /**< Minimum value of the timeout_ticks parameter of app_timer_start(). */
+
+#define APP_TIMER_NODE_SIZE 40 /**< Size of app_timer.timer_node_t (only for use inside APP_TIMER_BUF_SIZE()). */
+#define APP_TIMER_USER_OP_SIZE 24 /**< Size of app_timer.timer_user_op_t (only for use inside APP_TIMER_BUF_SIZE()). */
+#define APP_TIMER_USER_SIZE 8 /**< Size of app_timer.timer_user_t (only for use inside APP_TIMER_BUF_SIZE()). */
+#define APP_TIMER_INT_LEVELS 3 /**< Number of interrupt levels from where timer operations may be initiated (only for use inside APP_TIMER_BUF_SIZE()). */
+
+#define MAX_RTC_COUNTER_VAL 0x00FFFFFF /**< Maximum value of the RTC counter. */
+
+/**@brief Compute number of bytes required to hold the application timer data structures.
+ *
+ * @param[in] MAX_TIMERS Maximum number of timers that can be created at any given time.
+ * @param[in] OP_QUEUE_SIZE Size of queues holding timer operations that are pending execution.
+ * NOTE: Due to the queue implementation, this size must be one more
+ * than the size that is actually needed.
+ *
+ * @return Required application timer buffer size (in bytes).
+ */
+#define APP_TIMER_BUF_SIZE(MAX_TIMERS, OP_QUEUE_SIZE) \
+ ( \
+ ((MAX_TIMERS) * APP_TIMER_NODE_SIZE) \
+ + \
+ ( \
+ APP_TIMER_INT_LEVELS \
+ * \
+ (APP_TIMER_USER_SIZE + ((OP_QUEUE_SIZE) + 1) * APP_TIMER_USER_OP_SIZE) \
+ ) \
+ )
+
+/**@brief Convert milliseconds to timer ticks.
+ *
+ * @note This macro uses 64 bit integer arithmetic, but as long as the macro parameters are
+ * constants (i.e. defines), the computation will be done by the preprocessor.
+ *
+ * @param[in] MS Milliseconds.
+ * @param[in] PRESCALER Value of the RTC1 PRESCALER register (must be the same value that was
+ * passed to APP_TIMER_INIT()).
+ *
+ * @note When using this macro, it is the responsibility of the developer to ensure that the
+ * values provided as input result in an output value that is supported by the
+ * @ref app_timer_start function. For example, when the ticks for 1 ms is needed, the
+ * maximum possible value of PRESCALER must be 6, when @ref APP_TIMER_CLOCK_FREQ is 32768.
+ * This will result in a ticks value as 5. Any higher value for PRESCALER will result in a
+ * ticks value that is not supported by this module.
+ *
+ * @return Number of timer ticks.
+ */
+#define APP_TIMER_TICKS(MS, PRESCALER)\
+ ((uint32_t)ROUNDED_DIV((MS) * (uint64_t)APP_TIMER_CLOCK_FREQ, ((PRESCALER) + 1) * 1000))
+
+/**@brief Timer id type. */
+typedef uint32_t app_timer_id_t;
+
+#define TIMER_NULL ((app_timer_id_t)(0 - 1)) /**< Invalid timer id. */
+
+/**@brief Application timeout handler type. */
+typedef void (*app_timer_timeout_handler_t)(void * p_context);
+
+/**@brief Type of function for passing events from the timer module to the scheduler. */
+typedef uint32_t (*app_timer_evt_schedule_func_t) (app_timer_timeout_handler_t timeout_handler,
+ void * p_context);
+
+/**@brief Timer modes. */
+typedef enum
+{
+ APP_TIMER_MODE_SINGLE_SHOT, /**< The timer will expire only once. */
+ APP_TIMER_MODE_REPEATED /**< The timer will restart each time it expires. */
+} app_timer_mode_t;
+
+/**@brief Macro for initializing the application timer module.
+ *
+ * @details It will handle dimensioning and allocation of the memory buffer required by the timer,
+ * making sure that the buffer is correctly aligned. It will also connect the timer module
+ * to the scheduler (if specified).
+ *
+ * @note This module assumes that the LFCLK is already running. If it isn't, the module will
+ * be non-functional, since the RTC will not run. If you don't use a softdevice, you'll
+ * have to start the LFCLK manually. See the rtc_example's \ref lfclk_config() function
+ * for an example of how to do this. If you use a softdevice, the LFCLK is started on
+ * softdevice init.
+ *
+ *
+ * @param[in] PRESCALER Value of the RTC1 PRESCALER register. This will decide the
+ * timer tick rate. Set to 0 for no prescaling.
+ * @param[in] MAX_TIMERS Maximum number of timers that can be created at any given time.
+ * @param[in] OP_QUEUES_SIZE Size of queues holding timer operations that are pending execution.
+ * @param[in] USE_SCHEDULER TRUE if the application is using the event scheduler,
+ * FALSE otherwise.
+ *
+ * @note Since this macro allocates a buffer, it must only be called once (it is OK to call it
+ * several times as long as it is from the same location, e.g. to do a reinitialization).
+ */
+/*lint -emacro(506, APP_TIMER_INIT) */ /* Suppress "Constant value Boolean */
+#define APP_TIMER_INIT(PRESCALER, MAX_TIMERS, OP_QUEUES_SIZE, USE_SCHEDULER) \
+ do \
+ { \
+ static uint32_t APP_TIMER_BUF[CEIL_DIV(APP_TIMER_BUF_SIZE((MAX_TIMERS), \
+ (OP_QUEUES_SIZE) + 1), \
+ sizeof(uint32_t))]; \
+ uint32_t ERR_CODE = app_timer_init((PRESCALER), \
+ (MAX_TIMERS), \
+ (OP_QUEUES_SIZE) + 1, \
+ APP_TIMER_BUF, \
+ (USE_SCHEDULER) ? app_timer_evt_schedule : NULL); \
+ APP_ERROR_CHECK(ERR_CODE); \
+ } while (0)
+
+/**@brief Function for initializing the timer module.
+ *
+ * @note Normally initialization should be done using the APP_TIMER_INIT() macro, as that will both
+ * allocate the buffers needed by the timer module (including aligning the buffers correctly,
+ * and also take care of connecting the timer module to the scheduler (if specified).
+ *
+ * @param[in] prescaler Value of the RTC1 PRESCALER register. Set to 0 for no prescaling.
+ * @param[in] max_timers Maximum number of timers that can be created at any given time.
+ * @param[in] op_queues_size Size of queues holding timer operations that are pending
+ * execution. NOTE: Due to the queue implementation, this size must
+ * be one more than the size that is actually needed.
+ * @param[in] p_buffer Pointer to memory buffer for internal use in the app_timer
+ * module. The size of the buffer can be computed using the
+ * APP_TIMER_BUF_SIZE() macro. The buffer must be aligned to a
+ * 4 byte boundary.
+ * @param[in] evt_schedule_func Function for passing timeout events to the scheduler. Point to
+ * app_timer_evt_schedule() to connect to the scheduler. Set to NULL
+ * to make the timer module call the timeout handler directly from
+ * the timer interrupt handler.
+ *
+ * @retval NRF_SUCCESS Successful initialization.
+ * @retval NRF_ERROR_INVALID_PARAM Invalid parameter (buffer not aligned to a 4 byte
+ * boundary or NULL).
+ */
+uint32_t app_timer_init(uint32_t prescaler,
+ uint8_t max_timers,
+ uint8_t op_queues_size,
+ void * p_buffer,
+ app_timer_evt_schedule_func_t evt_schedule_func);
+
+/**@brief Function for creating a timer instance.
+ *
+ * @param[out] p_timer_id Id of the newly created timer.
+ * @param[in] mode Timer mode.
+ * @param[in] timeout_handler Function to be executed when the timer expires.
+ *
+ * @retval NRF_SUCCESS Timer was successfully created.
+ * @retval NRF_ERROR_INVALID_PARAM Invalid parameter.
+ * @retval NRF_ERROR_INVALID_STATE Application timer module has not been initialized.
+ * @retval NRF_ERROR_NO_MEM Maximum number of timers has already been reached.
+ *
+ * @note This function does the timer allocation in the caller's context. It is also not protected
+ * by a critical region. Therefore care must be taken not to call it from several interrupt
+ * levels simultaneously.
+ */
+uint32_t app_timer_create(app_timer_id_t * p_timer_id,
+ app_timer_mode_t mode,
+ app_timer_timeout_handler_t timeout_handler);
+
+/**@brief Function for starting a timer.
+ *
+ * @param[in] timer_id Id of timer to start.
+ * @param[in] timeout_ticks Number of ticks (of RTC1, including prescaling) to timeout event
+ * (minimum 5 ticks).
+ * @param[in] p_context General purpose pointer. Will be passed to the timeout handler when
+ * the timer expires.
+ *
+ * @retval NRF_SUCCESS Timer was successfully started.
+ * @retval NRF_ERROR_INVALID_PARAM Invalid parameter.
+ * @retval NRF_ERROR_INVALID_STATE Application timer module has not been initialized, or timer
+ * has not been created.
+ * @retval NRF_ERROR_NO_MEM Timer operations queue was full.
+ *
+ * @note The minimum timeout_ticks value is 5.
+ * @note For multiple active timers, timeouts occurring in close proximity to each other (in the
+ * range of 1 to 3 ticks) will have a positive jitter of maximum 3 ticks.
+ * @note When calling this method on a timer which is already running, the second start operation
+ * will be ignored.
+ */
+uint32_t app_timer_start(app_timer_id_t timer_id, uint32_t timeout_ticks, void * p_context);
+
+/**@brief Function for stopping the specified timer.
+ *
+ * @param[in] timer_id Id of timer to stop.
+ *
+ * @retval NRF_SUCCESS Timer was successfully stopped.
+ * @retval NRF_ERROR_INVALID_PARAM Invalid parameter.
+ * @retval NRF_ERROR_INVALID_STATE Application timer module has not been initialized, or timer
+ * has not been created.
+ * @retval NRF_ERROR_NO_MEM Timer operations queue was full.
+ */
+uint32_t app_timer_stop(app_timer_id_t timer_id);
+
+/**@brief Function for stopping all running timers.
+ *
+ * @retval NRF_SUCCESS All timers were successfully stopped.
+ * @retval NRF_ERROR_INVALID_STATE Application timer module has not been initialized.
+ * @retval NRF_ERROR_NO_MEM Timer operations queue was full.
+ */
+uint32_t app_timer_stop_all(void);
+
+/**@brief Function for returning the current value of the RTC1 counter. The
+ * value includes overflow bits to extend the range to 64-bits.
+ *
+ * @param[out] p_ticks Current value of the RTC1 counter.
+ *
+ * @retval NRF_SUCCESS Counter was successfully read.
+ */
+uint32_t app_timer_cnt_get(uint64_t * p_ticks);
+
+/**@brief Function for computing the difference between two RTC1 counter values.
+ *
+ * @param[in] ticks_to Value returned by app_timer_cnt_get().
+ * @param[in] ticks_from Value returned by app_timer_cnt_get().
+ * @param[out] p_ticks_diff Number of ticks from ticks_from to ticks_to.
+ *
+ * @retval NRF_SUCCESS Counter difference was successfully computed.
+ */
+uint32_t app_timer_cnt_diff_compute(uint32_t ticks_to,
+ uint32_t ticks_from,
+ uint32_t * p_ticks_diff);
+
+
+// Type and functions for connecting the timer to the scheduler:
+
+/**@cond NO_DOXYGEN */
+typedef struct
+{
+ app_timer_timeout_handler_t timeout_handler;
+ void * p_context;
+} app_timer_event_t;
+
+static __INLINE void app_timer_evt_get(void * p_event_data, uint16_t event_size)
+{
+ app_timer_event_t * p_timer_event = (app_timer_event_t *)p_event_data;
+
+ APP_ERROR_CHECK_BOOL(event_size == sizeof(app_timer_event_t));
+ p_timer_event->timeout_handler(p_timer_event->p_context);
+}
+
+static __INLINE uint32_t app_timer_evt_schedule(app_timer_timeout_handler_t timeout_handler,
+ void * p_context)
+{
+ app_timer_event_t timer_event;
+
+ timer_event.timeout_handler = timeout_handler;
+ timer_event.p_context = p_context;
+
+ return app_sched_event_put(&timer_event, sizeof(timer_event), app_timer_evt_get);
+}
+/**@endcond */
+
+#ifdef __cplusplus
+}
+#endif // #ifdef __cplusplus
+
+#endif // APP_TIMER_H__
+
+/** @} */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/nrf-sdk/app_common/app_trace.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,55 @@
+#ifndef __DEBUG_H_
+#define __DEBUG_H_
+
+#include <stdint.h>
+#include <stdio.h>
+
+/**
+ * @defgroup app_trace Debug Logger
+ * @ingroup app_common
+ * @{
+ * @brief Enables debug logs/ trace over UART.
+ * @details Enables debug logs/ trace over UART. Tracing is enabled only if
+ * ENABLE_DEBUG_LOG_SUPPORT is defined in the project.
+ */
+#ifdef ENABLE_DEBUG_LOG_SUPPORT
+/**
+ * @brief Module Initialization.
+ *
+ * @details Initializes the module to use UART as trace output.
+ *
+ * @warning This function will configure UART using default board configuration (described in @ref nrf51_setups).
+ * Do not call this function if UART is configured from a higher level in the application.
+ */
+void app_trace_init(void);
+
+/**
+ * @brief Log debug messages.
+ *
+ * @details This API logs messages over UART. The module must be initialized before using this API.
+ *
+ * @note Though this is currently a macro, it should be used used and treated as function.
+ */
+#define app_trace_log printf
+
+/**
+ * @brief Dump auxiliary byte buffer to the debug trace.
+ *
+ * @details This API logs messages over UART. The module must be initialized before using this API.
+ *
+ * @param[in] p_buffer Buffer to be dumped on the debug trace.
+ * @param[in] len Size of the buffer.
+ */
+void app_trace_dump(uint8_t * p_buffer, uint32_t len);
+
+#else // ENABLE_DEBUG_LOG_SUPPORT
+
+#define app_trace_init(...)
+#define app_trace_log(...)
+#define app_trace_dump(...)
+
+#endif // ENABLE_DEBUG_LOG_SUPPORT
+
+/** @} */
+
+#endif //__DEBUG_H_
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/nrf-sdk/app_common/app_uart.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,286 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/**@file
+ *
+ * @defgroup app_uart UART module
+ * @{
+ * @ingroup app_common
+ *
+ * @brief UART module interface.
+ */
+
+#ifndef APP_UART_H__
+#define APP_UART_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "app_util_platform.h"
+
+#define UART_PIN_DISCONNECTED 0xFFFFFFFF /**< Value indicating that no pin is connected to this UART register. */
+
+/**@brief UART Flow Control modes for the peripheral.
+ */
+typedef enum
+{
+ APP_UART_FLOW_CONTROL_DISABLED, /**< UART Hw Flow Control is disabled. */
+ APP_UART_FLOW_CONTROL_ENABLED, /**< Standard UART Hw Flow Control is enabled. */
+ APP_UART_FLOW_CONTROL_LOW_POWER /**< Specialized UART Hw Flow Control is used. The Low Power setting allows the nRF51 to Power Off the UART module when CTS is in-active, and re-enabling the UART when the CTS signal becomes active. This allows the nRF51 to safe power by only using the UART module when it is needed by the remote site. */
+} app_uart_flow_control_t;
+
+/**@brief UART communication structure holding configuration settings for the peripheral.
+ */
+typedef struct
+{
+ uint8_t rx_pin_no; /**< RX pin number. */
+ uint8_t tx_pin_no; /**< TX pin number. */
+ uint8_t rts_pin_no; /**< RTS pin number, only used if flow control is enabled. */
+ uint8_t cts_pin_no; /**< CTS pin number, only used if flow control is enabled. */
+ app_uart_flow_control_t flow_control; /**< Flow control setting, if flow control is used, the system will use low power UART mode, based on CTS signal. */
+ bool use_parity; /**< Even parity if TRUE, no parity if FALSE. */
+ uint32_t baud_rate; /**< Baud rate configuration. */
+} app_uart_comm_params_t;
+
+/**@brief UART buffer for transmitting/receiving data.
+ */
+typedef struct
+{
+ uint8_t * rx_buf; /**< Pointer to the RX buffer. */
+ uint32_t rx_buf_size; /**< Size of the RX buffer. */
+ uint8_t * tx_buf; /**< Pointer to the TX buffer. */
+ uint32_t tx_buf_size; /**< Size of the TX buffer. */
+} app_uart_buffers_t;
+
+/**@brief Enumeration describing current state of the UART.
+ *
+ * @details The connection state can be fetched by the application using the function call
+ * @ref app_uart_get_connection_state.
+ * When hardware flow control is used
+ * - APP_UART_CONNECTED: Communication is ongoing.
+ * - APP_UART_DISCONNECTED: No communication is ongoing.
+ *
+ * When no hardware flow control is used
+ * - APP_UART_CONNECTED: Always returned as bytes can always be received/transmitted.
+ */
+typedef enum
+{
+ APP_UART_DISCONNECTED, /**< State indicating that the UART is disconnected and cannot receive or transmit bytes. */
+ APP_UART_CONNECTED /**< State indicating that the UART is connected and ready to receive or transmit bytes. If flow control is disabled, the state will always be connected. */
+} app_uart_connection_state_t;
+
+/**@brief Enumeration which defines events used by the UART module upon data reception or error.
+ *
+ * @details The event type is used to indicate the type of additional information in the event
+ * @ref app_uart_evt_t.
+ */
+typedef enum
+{
+ APP_UART_DATA_READY, /**< An event indicating that UART data has been received. The data is available in the FIFO and can be fetched using @ref app_uart_get. */
+ APP_UART_FIFO_ERROR, /**< An error in the FIFO module used by the app_uart module has occured. The FIFO error code is stored in app_uart_evt_t.data.error_code field. */
+ APP_UART_COMMUNICATION_ERROR, /**< An communication error has occured during reception. The error is stored in app_uart_evt_t.data.error_communication field. */
+ APP_UART_TX_EMPTY, /**< An event indicating that UART has completed transmission of all available data in the TX FIFO. */
+ APP_UART_DATA, /**< An event indicating that UART data has been received, and data is present in data field. This event is only used when no FIFO is configured. */
+} app_uart_evt_type_t;
+
+/**@brief Struct containing events from the UART module.
+ *
+ * @details The app_uart_evt_t is used to notify the application of asynchronous events when data
+ * are received on the UART peripheral or in case an error occured during data reception.
+ */
+typedef struct
+{
+ app_uart_evt_type_t evt_type; /**< Type of event. */
+ union
+ {
+ uint32_t error_communication; /**< Field used if evt_type is: APP_UART_COMMUNICATION_ERROR. This field contains the value in the ERRORSRC register for the UART peripheral. The UART_ERRORSRC_x defines from @ref nrf51_bitfields.h can be used to parse the error code. See also the nRF51 Series Reference Manual for specification. */
+ uint32_t error_code; /**< Field used if evt_type is: NRF_ERROR_x. Additional status/error code if the error event type is APP_UART_FIFO_ERROR. This error code refer to errors defined in nrf_error.h. */
+ uint8_t value; /**< Field used if evt_type is: NRF_ERROR_x. Additional status/error code if the error event type is APP_UART_FIFO_ERROR. This error code refer to errors defined in nrf_error.h. */
+ } data;
+} app_uart_evt_t;
+
+/**@brief Function for handling app_uart event callback.
+ *
+ * @details Upon an event in the app_uart module this callback function will be called to notify
+ * the applicatioon about the event.
+ *
+ * @param[in] p_app_uart_event Pointer to UART event.
+ */
+
+
+typedef void (* app_uart_event_handler_t) (app_uart_evt_t * p_app_uart_event);
+
+/**@brief Macro for safe initialization of the UART module in a single user instance when using
+ * a FIFO together with UART.
+ *
+ * @param[in] P_COMM_PARAMS Pointer to a UART communication structure: app_uart_comm_params_t
+ * @param[in] RX_BUF_SIZE Size of desired RX buffer, must be a power of 2 or ZERO (No FIFO).
+ * @param[in] TX_BUF_SIZE Size of desired TX buffer, must be a power of 2 or ZERO (No FIFO).
+ * @param[in] EVENT_HANDLER Event handler function to be called when an event occurs in the
+ * UART module.
+ * @param[in] IRQ_PRIO IRQ priority, app_irq_priority_t, for the UART module irq handler.
+ * @param[out] ERR_CODE The return value of the UART initialization function will be
+ * written to this parameter.
+ *
+ * @note Since this macro allocates a buffer and registers the module as a GPIOTE user when flow
+ * control is enabled, it must only be called once.
+ */
+#define APP_UART_FIFO_INIT(P_COMM_PARAMS, RX_BUF_SIZE, TX_BUF_SIZE, EVT_HANDLER, IRQ_PRIO, ERR_CODE) \
+ do \
+ { \
+ uint16_t APP_UART_UID = 0; \
+ app_uart_buffers_t buffers; \
+ static uint8_t rx_buf[RX_BUF_SIZE]; \
+ static uint8_t tx_buf[TX_BUF_SIZE]; \
+ \
+ buffers.rx_buf = rx_buf; \
+ buffers.rx_buf_size = sizeof (rx_buf); \
+ buffers.tx_buf = tx_buf; \
+ buffers.tx_buf_size = sizeof (tx_buf); \
+ ERR_CODE = app_uart_init(P_COMM_PARAMS, &buffers, EVT_HANDLER, IRQ_PRIO, &APP_UART_UID); \
+ } while (0)
+
+/**@brief Macro for safe initialization of the UART module in a single user instance.
+ *
+ * @param[in] P_COMM_PARAMS Pointer to a UART communication structure: app_uart_comm_params_t
+ * @param[in] EVENT_HANDLER Event handler function to be called when an event occurs in the
+ * UART module.
+ * @param[in] IRQ_PRIO IRQ priority, app_irq_priority_t, for the UART module irq handler.
+ * @param[out] ERR_CODE The return value of the UART initialization function will be
+ * written to this parameter.
+ *
+ * @note Since this macro allocates registers the module as a GPIOTE user when flow control is
+ * enabled, it must only be called once.
+ */
+#define APP_UART_INIT(P_COMM_PARAMS, EVT_HANDLER, IRQ_PRIO, ERR_CODE) \
+ do \
+ { \
+ uint16_t APP_UART_UID = 0; \
+ ERR_CODE = app_uart_init(P_COMM_PARAMS, NULL, EVT_HANDLER, IRQ_PRIO, &APP_UART_UID); \
+ } while (0)
+
+/**@brief Function for initializing the UART module. Use this initialization when several instances of the UART
+ * module are needed.
+ *
+ * @details This initialization will return a UART user id for the caller. The UART user id must be
+ * used upon re-initialization of the UART or closing of the module for the user.
+ * If single instance usage is needed, the APP_UART_INIT() macro should be used instead.
+ *
+ * @note Normally single instance initialization should be done using the APP_UART_INIT() or
+ * APP_UART_INIT_FIFO() macro depending on whether the FIFO should be used by the UART, as
+ * that will allocate the buffers needed by the UART module (including aligning the buffer
+ * correctly).
+
+ * @param[in] p_comm_params Pin and communication parameters.
+ * @param[in] p_buffers RX and TX buffers, NULL is FIFO is not used.
+ * @param[in] error_handler Function to be called in case of an error.
+ * @param[in] app_irq_priority Interrupt priority level.
+ * @param[in,out] p_uart_uid User id for the UART module. The p_uart_uid must be used if
+ * re-initialization and/or closing of the UART module is needed.
+ * If the value pointed to by p_uart_uid is zero, this is
+ * considdered a first time initialization. Otherwise this is
+ * considered a re-initialization for the user with id *p_uart_uid.
+ *
+ * @retval NRF_SUCCESS If successful initialization.
+ * @retval NRF_ERROR_INVALID_LENGTH If a provided buffer is not a power of two.
+ * @retval NRF_ERROR_NULL If one of the provided buffers is a NULL pointer.
+ *
+ * Those errors are propagated by the UART module to the caller upon registration when Hardware Flow
+ * Control is enabled. When Hardware Flow Control is not used, those errors cannot occur.
+ * @retval NRF_ERROR_INVALID_STATE The GPIOTE module is not in a valid state when registering
+ * the UART module as a user.
+ * @retval NRF_ERROR_INVALID_PARAM The UART module provides an invalid callback function when
+ * registering the UART module as a user.
+ * Or the value pointed to by *p_uart_uid is not a valid
+ * GPIOTE number.
+ * @retval NRF_ERROR_NO_MEM GPIOTE module has reached the maximum number of users.
+ */
+uint32_t app_uart_init(const app_uart_comm_params_t * p_comm_params,
+ app_uart_buffers_t * p_buffers,
+ app_uart_event_handler_t error_handler,
+ app_irq_priority_t irq_priority,
+ uint16_t * p_uart_uid);
+
+/**@brief Function for getting a byte from the UART.
+ *
+ * @details This function will get the next byte from the RX buffer. If the RX buffer is empty
+ * an error code will be returned and the app_uart module will generate an event upon
+ * reception of the first byte which is added to the RX buffer.
+ *
+ * @param[out] p_byte Pointer to an address where next byte received on the UART will be copied.
+ *
+ * @retval NRF_SUCCESS If a byte has been received and pushed to the pointer provided.
+ * @retval NRF_ERROR_NOT_FOUND If no byte is available in the RX buffer of the app_uart module.
+ */
+uint32_t app_uart_get(uint8_t * p_byte);
+
+/**@brief Function for putting a byte on the UART.
+ *
+ * @details This call is non-blocking.
+ *
+ * @param[in] byte Byte to be transmitted on the UART.
+ *
+ * @retval NRF_SUCCESS If the byte was succesfully put on the TX buffer for transmission.
+ * @retval NRF_ERROR_NO_MEM If no more space is available in the TX buffer.
+ * NRF_ERROR_NO_MEM may occur if flow control is enabled and CTS signal
+ * is high for a long period and the buffer fills up.
+ */
+uint32_t app_uart_put(uint8_t byte);
+
+/**@brief Function for getting the current state of the UART.
+ *
+ * @details If flow control is disabled, the state is assumed to always be APP_UART_CONNECTED.
+ *
+ * When using flow control the state will be controlled by the CTS. If CTS is set active
+ * by the remote side, or the app_uart module is in the process of transmitting a byte,
+ * app_uart is in APP_UART_CONNECTED state. If CTS is set inactive by remote side app_uart
+ * will not get into APP_UART_DISCONNECTED state until the last byte in the TXD register
+ * is fully transmitted.
+ *
+ * Internal states in the state machine are mapped to the general connected/disconnected
+ * states in the following ways:
+ *
+ * - UART_ON = CONNECTED
+ * - UART_READY = CONNECTED
+ * - UART_WAIT = CONNECTED
+ * - UART_OFF = DISCONNECTED.
+ *
+ * @param[out] p_connection_state Current connection state of the UART.
+ *
+ * @retval NRF_SUCCESS The connection state was succesfully retrieved.
+ */
+uint32_t app_uart_get_connection_state(app_uart_connection_state_t * p_connection_state);
+
+/**@brief Function for flushing the RX and TX buffers (Only valid if FIFO is used).
+ * This function does nothing if FIFO is not used.
+ *
+ * @retval NRF_SUCCESS Flushing completed (Current implementation will always succeed).
+ */
+uint32_t app_uart_flush(void);
+
+/**@brief Function for closing the UART module.
+ *
+ * @details This function will close any on-going UART transmissions and disable itself in the
+ * GPTIO module.
+ *
+ * @param[in] app_uart_uid User id for the UART module. The app_uart_uid must be identical to the
+ * UART id returned on initialization and which is currently in use.
+
+ * @retval NRF_SUCCESS If successfully closed.
+ * @retval NRF_ERROR_INVALID_PARAM If an invalid user id is provided or the user id differs from
+ * the current active user.
+ */
+uint32_t app_uart_close(uint16_t app_uart_id);
+
+
+#endif //APP_UART_H__
+
+/** @} */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/nrf-sdk/app_common/app_util.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,232 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup app_util Utility Functions and Definitions
+ * @{
+ * @ingroup app_common
+ *
+ * @brief Various types and definitions available to all applications.
+ */
+
+#ifndef APP_UTIL_H__
+#define APP_UTIL_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "compiler_abstraction.h"
+
+enum
+{
+ UNIT_0_625_MS = 625, /**< Number of microseconds in 0.625 milliseconds. */
+ UNIT_1_25_MS = 1250, /**< Number of microseconds in 1.25 milliseconds. */
+ UNIT_10_MS = 10000 /**< Number of microseconds in 10 milliseconds. */
+};
+
+/**@brief Macro for doing static (i.e. compile time) assertion.
+ *
+ * @note If the assertion fails when compiling using Keil, the compiler will report error message
+ * "error: #94: the size of an array must be greater than zero" (while gcc will list the
+ * symbol static_assert_failed, making the error message more readable).
+ * If the supplied expression can not be evaluated at compile time, Keil will report
+ * "error: #28: expression must have a constant value".
+ *
+ * @note The macro is intentionally implemented not using do while(0), allowing it to be used
+ * outside function blocks (e.g. close to global type- and variable declarations).
+ * If used in a code block, it must be used before any executable code in this block.
+ *
+ * @param[in] EXPR Constant expression to be verified.
+ */
+
+#if defined(__GNUC__)
+#define STATIC_ASSERT(EXPR) typedef char __attribute__((unused)) static_assert_failed[(EXPR) ? 1 : -1]
+#else
+#define STATIC_ASSERT(EXPR) typedef char static_assert_failed[(EXPR) ? 1 : -1]
+#endif
+
+
+/**@brief type for holding an encoded (i.e. little endian) 16 bit unsigned integer. */
+typedef uint8_t uint16_le_t[2];
+
+/**@brief type for holding an encoded (i.e. little endian) 32 bit unsigned integer. */
+typedef uint8_t uint32_le_t[4];
+
+/**@brief Byte array type. */
+typedef struct
+{
+ uint16_t size; /**< Number of array entries. */
+ uint8_t * p_data; /**< Pointer to array entries. */
+} uint8_array_t;
+
+/**@brief Perform rounded integer division (as opposed to truncating the result).
+ *
+ * @param[in] A Numerator.
+ * @param[in] B Denominator.
+ *
+ * @return Rounded (integer) result of dividing A by B.
+ */
+#define ROUNDED_DIV(A, B) (((A) + ((B) / 2)) / (B))
+
+/**@brief Check if the integer provided is a power of two.
+ *
+ * @param[in] A Number to be tested.
+ *
+ * @return true if value is power of two.
+ * @return false if value not power of two.
+ */
+#define IS_POWER_OF_TWO(A) ( ((A) != 0) && ((((A) - 1) & (A)) == 0) )
+
+/**@brief To convert ticks to millisecond
+ * @param[in] time Number of millseconds that needs to be converted.
+ * @param[in] resolution Units to be converted.
+ */
+#define MSEC_TO_UNITS(TIME, RESOLUTION) (((TIME) * 1000) / (RESOLUTION))
+
+
+/**@brief Perform integer division, making sure the result is rounded up.
+ *
+ * @details One typical use for this is to compute the number of objects with size B is needed to
+ * hold A number of bytes.
+ *
+ * @param[in] A Numerator.
+ * @param[in] B Denominator.
+ *
+ * @return Integer result of dividing A by B, rounded up.
+ */
+#define CEIL_DIV(A, B) \
+ /*lint -save -e573 */ \
+ ((((A) - 1) / (B)) + 1) \
+ /*lint -restore */
+
+/**@brief Function for encoding a uint16 value.
+ *
+ * @param[in] value Value to be encoded.
+ * @param[out] p_encoded_data Buffer where the encoded data is to be written.
+ *
+ * @return Number of bytes written.
+ */
+static __INLINE uint8_t uint16_encode(uint16_t value, uint8_t * p_encoded_data)
+{
+ p_encoded_data[0] = (uint8_t) ((value & 0x00FF) >> 0);
+ p_encoded_data[1] = (uint8_t) ((value & 0xFF00) >> 8);
+ return sizeof(uint16_t);
+}
+
+/**@brief Function for encoding a uint32 value.
+ *
+ * @param[in] value Value to be encoded.
+ * @param[out] p_encoded_data Buffer where the encoded data is to be written.
+ *
+ * @return Number of bytes written.
+ */
+static __INLINE uint8_t uint32_encode(uint32_t value, uint8_t * p_encoded_data)
+{
+ p_encoded_data[0] = (uint8_t) ((value & 0x000000FF) >> 0);
+ p_encoded_data[1] = (uint8_t) ((value & 0x0000FF00) >> 8);
+ p_encoded_data[2] = (uint8_t) ((value & 0x00FF0000) >> 16);
+ p_encoded_data[3] = (uint8_t) ((value & 0xFF000000) >> 24);
+ return sizeof(uint32_t);
+}
+
+/**@brief Function for decoding a uint16 value.
+ *
+ * @param[in] p_encoded_data Buffer where the encoded data is stored.
+ *
+ * @return Decoded value.
+ */
+static __INLINE uint16_t uint16_decode(const uint8_t * p_encoded_data)
+{
+ return ( (((uint16_t)((uint8_t *)p_encoded_data)[0])) |
+ (((uint16_t)((uint8_t *)p_encoded_data)[1]) << 8 ));
+}
+
+/**@brief Function for decoding a uint32 value.
+ *
+ * @param[in] p_encoded_data Buffer where the encoded data is stored.
+ *
+ * @return Decoded value.
+ */
+static __INLINE uint32_t uint32_decode(const uint8_t * p_encoded_data)
+{
+ return ( (((uint32_t)((uint8_t *)p_encoded_data)[0]) << 0) |
+ (((uint32_t)((uint8_t *)p_encoded_data)[1]) << 8) |
+ (((uint32_t)((uint8_t *)p_encoded_data)[2]) << 16) |
+ (((uint32_t)((uint8_t *)p_encoded_data)[3]) << 24 ));
+}
+
+/** @brief Function for converting the input voltage (in milli volts) into percentage of 3.0 Volts.
+ *
+ * @details The calculation is based on a linearized version of the battery's discharge
+ * curve. 3.0V returns 100% battery level. The limit for power failure is 2.1V and
+ * is considered to be the lower boundary.
+ *
+ * The discharge curve for CR2032 is non-linear. In this model it is split into
+ * 4 linear sections:
+ * - Section 1: 3.0V - 2.9V = 100% - 42% (58% drop on 100 mV)
+ * - Section 2: 2.9V - 2.74V = 42% - 18% (24% drop on 160 mV)
+ * - Section 3: 2.74V - 2.44V = 18% - 6% (12% drop on 300 mV)
+ * - Section 4: 2.44V - 2.1V = 6% - 0% (6% drop on 340 mV)
+ *
+ * These numbers are by no means accurate. Temperature and
+ * load in the actual application is not accounted for!
+ *
+ * @param[in] mvolts The voltage in mV
+ *
+ * @return Battery level in percent.
+*/
+static __INLINE uint8_t battery_level_in_percent(const uint16_t mvolts)
+{
+ uint8_t battery_level;
+
+ if (mvolts >= 3000)
+ {
+ battery_level = 100;
+ }
+ else if (mvolts > 2900)
+ {
+ battery_level = 100 - ((3000 - mvolts) * 58) / 100;
+ }
+ else if (mvolts > 2740)
+ {
+ battery_level = 42 - ((2900 - mvolts) * 24) / 160;
+ }
+ else if (mvolts > 2440)
+ {
+ battery_level = 18 - ((2740 - mvolts) * 12) / 300;
+ }
+ else if (mvolts > 2100)
+ {
+ battery_level = 6 - ((2440 - mvolts) * 6) / 340;
+ }
+ else
+ {
+ battery_level = 0;
+ }
+
+ return battery_level;
+}
+
+/**@brief Function for checking if a pointer value is aligned to a 4 byte boundary.
+ *
+ * @param[in] p Pointer value to be checked.
+ *
+ * @return TRUE if pointer is aligned to a 4 byte boundary, FALSE otherwise.
+ */
+static __INLINE bool is_word_aligned(void * p)
+{
+ return (((uintptr_t)p & 0x03) == 0);
+}
+
+#endif // APP_UTIL_H__
+
+/** @} */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/nrf-sdk/app_common/crc16.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,52 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup crc_compute CRC compute
+ * @{
+ * @ingroup hci_transport
+ *
+ * @brief This module implements the CRC-16 calculation in the blocks.
+ */
+
+#ifndef CRC16_H__
+#define CRC16_H__
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**@brief Function for calculating CRC-16 in blocks.
+ *
+ * Feed each consecutive data block into this function, along with the current value of p_crc as
+ * returned by the previous call of this function. The first call of this function should pass NULL
+ * as the initial value of the crc in p_crc.
+ *
+ * @param[in] p_data The input data block for computation.
+ * @param[in] size The size of the input data block in bytes.
+ * @param[in] p_crc The previous calculated CRC-16 value or NULL if first call.
+ *
+ * @return The updated CRC-16 value, based on the input supplied.
+ */
+uint16_t crc16_compute(const uint8_t * p_data, uint32_t size, const uint16_t * p_crc);
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif // CRC16_H__
+
+/** @} */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/nrf-sdk/app_common/hal_transport.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,227 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/**@file
+ *
+ * @defgroup hci_transport HCI Transport
+ * @{
+ * @ingroup app_common
+ *
+ * @brief HCI transport module implementation.
+ *
+ * This module implements certain specific features from the three-wire UART transport layer,
+ * defined by the Bluetooth specification version 4.0 [Vol 4] part D.
+ *
+ * \par Features supported
+ * - Transmission and reception of Vendor Specific HCI packet type application packets.
+ * - Transmission and reception of reliable packets: defined by chapter 6 of the specification.
+ *
+ * \par Features not supported
+ * - Link establishment procedure: defined by chapter 8 of the specification.
+ * - Low power: defined by chapter 9 of the specification.
+ *
+ * \par Implementation specific behaviour
+ * - As Link establishment procedure is not supported following static link configuration parameters
+ * are used:
+ * + TX window size is 1.
+ * + 16 bit CCITT-CRC must be used.
+ * + Out of frame software flow control not supported.
+ * + Parameters specific for resending reliable packets are compile time configurable (clarifed
+ * later in this document).
+ * + Acknowledgement packet transmissions are not timeout driven , meaning they are delivered for
+ * transmission within same context which the corresponding application packet was received.
+ *
+ * \par Implementation specific limitations
+ * Current implementation has the following limitations which will have impact to system wide
+ * behaviour:
+ * - Delayed acknowledgement scheduling not implemented:
+ * There exists a possibility that acknowledgement TX packet and application TX packet will collide
+ * in the TX pipeline having the end result that acknowledgement packet will be excluded from the TX
+ * pipeline which will trigger the retransmission algorithm within the peer protocol entity.
+ * - Delayed retransmission scheduling not implemented:
+ * There exists a possibility that retransmitted application TX packet and acknowledgement TX packet
+ * will collide in the TX pipeline having the end result that retransmitted application TX packet
+ * will be excluded from the TX pipeline.
+ * - Processing of the acknowledgement number from RX application packets:
+ * Acknowledgement number is not processed from the RX application packets having the end result
+ * that unnecessary application packet retransmissions can occur.
+ *
+ * The application TX packet processing flow is illustrated by the statemachine below.
+ *
+ * @image html hci_transport_tx_sm.png "TX - application packet statemachine"
+ *
+ * \par Component specific configuration options
+ *
+ * The following compile time configuration options are available, and used to configure the
+ * application TX packet retransmission interval, in order to suite various application specific
+ * implementations:
+ * - MAC_PACKET_SIZE_IN_BITS Maximum size of a single application packet in bits.
+ * - USED_BAUD_RATE Used uart baudrate.
+ *
+ * The following compile time configuration option is available to configure module specific
+ * behaviour:
+ * - MAX_RETRY_COUNT Max retransmission retry count for applicaton packets.
+ */
+
+#ifndef HCI_TRANSPORT_H__
+#define HCI_TRANSPORT_H__
+
+#include <stdint.h>
+#include "nrf_error.h"
+
+#define HCI_TRANSPORT_PKT_HEADER_SIZE (2) /**< Size of transport packet header */
+
+/**@brief Generic event callback function events. */
+typedef enum
+{
+ HCI_TRANSPORT_RX_RDY, /**< An event indicating that RX packet is ready for read. */
+ HCI_TRANSPORT_EVT_TYPE_MAX /**< Enumeration upper bound. */
+} hci_transport_evt_type_t;
+
+/**@brief Struct containing events from the Transport layer.
+ */
+typedef struct
+{
+ hci_transport_evt_type_t evt_type; /**< Type of event. */
+} hci_transport_evt_t;
+
+/**@brief Transport layer generic event callback function type.
+ *
+ * @param[in] event Transport layer event.
+ */
+typedef void (*hci_transport_event_handler_t)(hci_transport_evt_t event);
+
+/**@brief TX done event callback function result codes. */
+typedef enum
+{
+ HCI_TRANSPORT_TX_DONE_SUCCESS, /**< Transmission success, peer transport entity has acknowledged the transmission. */
+ HCI_TRANSPORT_TX_DONE_FAILURE /**< Transmission failure. */
+} hci_transport_tx_done_result_t;
+
+/**@brief Transport layer TX done event callback function type.
+ *
+ * @param[in] result TX done event result code.
+ */
+typedef void (*hci_transport_tx_done_handler_t)(hci_transport_tx_done_result_t result);
+
+/**@brief Function for registering a generic event handler.
+ *
+ * @note Multiple registration requests will overwrite any possible existing registration.
+ *
+ * @param[in] event_handler The function to be called by the transport layer upon an event.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ * @retval NRF_ERROR_NULL Operation failure. NULL pointer supplied.
+ */
+uint32_t hci_transport_evt_handler_reg(hci_transport_event_handler_t event_handler);
+
+/**@brief Function for registering a handler for TX done event.
+ *
+ * @note Multiple registration requests will overwrite any possible existing registration.
+ *
+ * @param[in] event_handler The function to be called by the transport layer upon TX done
+ * event.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ * @retval NRF_ERROR_NULL Operation failure. NULL pointer supplied.
+ */
+uint32_t hci_transport_tx_done_register(hci_transport_tx_done_handler_t event_handler);
+
+/**@brief Function for opening the transport channel and initializing the transport layer.
+ *
+ * @warning Must not be called for a channel which has been allready opened.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ * @retval NRF_ERROR_INTERNAL Operation failure. Internal error ocurred.
+ */
+uint32_t hci_transport_open(void);
+
+/**@brief Function for closing the transport channel.
+ *
+ * @note Can be called multiple times and also for not opened channel.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ */
+uint32_t hci_transport_close(void);
+
+/**@brief Function for allocating tx packet memory.
+ *
+ * @param[out] pp_memory Pointer to the packet data.
+ *
+ * @retval NRF_SUCCESS Operation success. Memory was allocated.
+ * @retval NRF_ERROR_NO_MEM Operation failure. No memory available.
+ * @retval NRF_ERROR_NULL Operation failure. NULL pointer supplied.
+ */
+uint32_t hci_transport_tx_alloc(uint8_t ** pp_memory);
+
+/**@brief Function for freeing tx packet memory.
+ *
+ * @note Memory management works in FIFO principle meaning that free order must match the alloc
+ * order.
+ *
+ * @retval NRF_SUCCESS Operation success. Memory was freed.
+ */
+uint32_t hci_transport_tx_free(void);
+
+/**@brief Function for writing a packet.
+ *
+ * @note Completion of this method does not guarantee that actual peripheral transmission would
+ * have completed.
+ *
+ * @note In case of 0 byte packet length write request, message will consist of only transport
+ * module specific headers.
+ *
+ * @note The buffer provided to this function must be allocated through @ref hci_transport_tx_alloc
+ * function.
+ *
+ * @retval NRF_SUCCESS Operation success. Packet was added to the transmission queue
+ * and an event will be send upon transmission completion.
+ * @retval NRF_ERROR_NO_MEM Operation failure. Transmission queue is full and packet was not
+ * added to the transmission queue. User should wait for
+ * a appropriate event prior issuing this operation again.
+ * @retval NRF_ERROR_DATA_SIZE Operation failure. Packet size exceeds limit.
+ * @retval NRF_ERROR_NULL Operation failure. NULL pointer supplied.
+ * @retval NRF_ERROR_INVALID_STATE Operation failure. Channel is not open.
+ * @retval NRF_ERROR_INVALID_ADDR Operation failure. Buffer provided is not allocated through
+ * hci_transport_tx_alloc function.
+ */
+uint32_t hci_transport_pkt_write(const uint8_t * p_buffer, uint16_t length);
+
+/**@brief Function for extracting received packet.
+ *
+ * @note Extracted memory can't be reused by the underlying transport layer untill freed by call to
+ * hci_transport_rx_pkt_consume().
+ *
+ * @param[out] pp_buffer Pointer to the packet data.
+ * @param[out] p_length Length of packet data in bytes.
+ *
+ * @retval NRF_SUCCESS Operation success. Packet was extracted.
+ * @retval NRF_ERROR_NO_MEM Operation failure. No packet available to extract.
+ * @retval NRF_ERROR_NULL Operation failure. NULL pointer supplied.
+ */
+uint32_t hci_transport_rx_pkt_extract(uint8_t ** pp_buffer, uint16_t * p_length);
+
+/**@brief Function for consuming extracted packet described by p_buffer.
+ *
+ * RX memory pointed to by p_buffer is freed and can be reused by the underlying transport layer.
+ *
+ * @param[in] p_buffer Pointer to the buffer that has been consumed.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ * @retval NRF_ERROR_NO_MEM Operation failure. No packet available to consume.
+ * @retval NRF_ERROR_INVALID_ADDR Operation failure. Not a valid pointer.
+ */
+uint32_t hci_transport_rx_pkt_consume(uint8_t * p_buffer);
+
+#endif // HCI_TRANSPORT_H__
+
+/** @} */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/nrf-sdk/app_common/hci_mem_pool.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,132 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup memory_pool Memory pool
+ * @{
+ * @ingroup app_common
+ *
+ * @brief Memory pool implementation
+ *
+ * Memory pool implementation, based on circular buffer data structure, which supports asynchronous
+ * processing of RX data. The current default implementation supports 1 TX buffer and 4 RX buffers.
+ * The memory managed by the pool is allocated from static storage instead of heap. The internal
+ * design of the circular buffer implementing the RX memory layout is illustrated in the picture
+ * below.
+ *
+ * @image html memory_pool.png "Circular buffer design"
+ *
+ * The expected call order for the RX APIs is as follows:
+ * - hci_mem_pool_rx_produce
+ * - hci_mem_pool_rx_data_size_set
+ * - hci_mem_pool_rx_extract
+ * - hci_mem_pool_rx_consume
+ *
+ * @warning If the above mentioned expected call order is violated the end result can be undefined.
+ *
+ * \par Component specific configuration options
+ *
+ * The following compile time configuration options are available to suit various implementations:
+ * - TX_BUF_SIZE TX buffer size in bytes.
+ * - RX_BUF_SIZE RX buffer size in bytes.
+ * - RX_BUF_QUEUE_SIZE RX buffer element size.
+ */
+
+#ifndef HCI_MEM_POOL_H__
+#define HCI_MEM_POOL_H__
+
+#include <stdint.h>
+#include "nrf_error.h"
+
+/**@brief Function for opening the module.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ */
+uint32_t hci_mem_pool_open(void);
+
+/**@brief Function for closing the module.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ */
+uint32_t hci_mem_pool_close(void);
+
+/**@brief Function for allocating requested amount of TX memory.
+ *
+ * @param[out] pp_buffer Pointer to the allocated memory.
+ *
+ * @retval NRF_SUCCESS Operation success. Memory was allocated.
+ * @retval NRF_ERROR_NO_MEM Operation failure. No memory available for allocation.
+ * @retval NRF_ERROR_NULL Operation failure. NULL pointer supplied.
+ */
+uint32_t hci_mem_pool_tx_alloc(void ** pp_buffer);
+
+/**@brief Function for freeing previously allocated TX memory.
+ *
+ * @note Memory management follows the FIFO principle meaning that free() order must match the
+ * alloc(...) order, which is the reason for omitting exact memory block identifier as an
+ * input parameter.
+ *
+ * @retval NRF_SUCCESS Operation success. Memory was freed.
+ */
+uint32_t hci_mem_pool_tx_free(void);
+
+/**@brief Function for producing a free RX memory block for usage.
+ *
+ * @note Upon produce request amount being 0, NRF_SUCCESS is returned.
+ *
+ * @param[in] length Amount, in bytes, of free memory to be produced.
+ * @param[out] pp_buffer Pointer to the allocated memory.
+ *
+ * @retval NRF_SUCCESS Operation success. Free RX memory block produced.
+ * @retval NRF_ERROR_NO_MEM Operation failure. No suitable memory available for allocation.
+ * @retval NRF_ERROR_DATA_SIZE Operation failure. Request size exceeds limit.
+ * @retval NRF_ERROR_NULL Operation failure. NULL pointer supplied.
+ */
+uint32_t hci_mem_pool_rx_produce(uint32_t length, void ** pp_buffer);
+
+/**@brief Function for setting the length of the last produced RX memory block.
+ *
+ * @warning If call to this API is omitted the end result is that the following call to
+ * mem_pool_rx_extract will return incorrect data in the p_length output parameter.
+ *
+ * @param[in] length Amount, in bytes, of actual memory used.
+ *
+ * @retval NRF_SUCCESS Operation success. Length was set.
+ */
+uint32_t hci_mem_pool_rx_data_size_set(uint32_t length);
+
+/**@brief Function for extracting a packet, which has been filled with read data, for further
+ * processing.
+ *
+ * @param[out] pp_buffer Pointer to the packet data.
+ * @param[out] p_length Length of packet data in bytes.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ * @retval NRF_ERROR_NO_MEM Operation failure. No packet available to extract.
+ * @retval NRF_ERROR_NULL Operation failure. NULL pointer supplied.
+ */
+uint32_t hci_mem_pool_rx_extract(uint8_t ** pp_buffer, uint32_t * p_length);
+
+/**@brief Function for freeing previously extracted packet, which has been filled with read data.
+ *
+ * @param[in] p_buffer Pointer to consumed buffer.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ * @retval NRF_ERROR_NO_MEM Operation failure. No packet available to free.
+ * @retval NRF_ERROR_INVALID_ADDR Operation failure. Not a valid pointer.
+ */
+uint32_t hci_mem_pool_rx_consume(uint8_t * p_buffer);
+
+#endif // HCI_MEM_POOL_H__
+
+/** @} */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/nrf-sdk/app_common/hci_mem_pool_internal.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,32 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup memory_pool_internal Memory Pool Internal
+ * @{
+ * @ingroup memory_pool
+ *
+ * @brief Memory pool internal definitions
+ */
+
+#ifndef MEM_POOL_INTERNAL_H__
+#define MEM_POOL_INTERNAL_H__
+
+#define TX_BUF_SIZE 600u /**< TX buffer size in bytes. */
+#define RX_BUF_SIZE TX_BUF_SIZE /**< RX buffer size in bytes. */
+
+#define RX_BUF_QUEUE_SIZE 4u /**< RX buffer element size. */
+
+#endif // MEM_POOL_INTERNAL_H__
+
+/** @} */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/nrf-sdk/app_common/hci_slip.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,129 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/** @file
+ *
+ * @defgroup hci_slip SLIP module
+ * @{
+ * @ingroup app_common
+ *
+ * @brief SLIP layer for supporting packet framing in HCI transport.
+ *
+ * @details This module implements SLIP packet framing as described in the Bluetooth Core
+ * Specification 4.0, Volume 4, Part D, Chapter 3 SLIP Layer.
+ *
+ * SLIP framing ensures that all packets sent on the UART are framed as:
+ * <0xC0> SLIP packet 1 <0xC0> <0xC0> SLIP packet 2 <0xC0>.
+ *
+ * The SLIP layer uses events to notify the upper layer when data transmission is complete
+ * and when a SLIP packet is received.
+ */
+
+#ifndef HCI_SLIP_H__
+#define HCI_SLIP_H__
+
+#include <stdint.h>
+
+/**@brief Event types from the SLIP Layer. */
+typedef enum
+{
+ HCI_SLIP_RX_RDY, /**< An event indicating that an RX packet is ready to be read. */
+ HCI_SLIP_TX_DONE, /**< An event indicating write completion of the TX packet provided in the function call \ref hci_slip_write . */
+ HCI_SLIP_RX_OVERFLOW, /**< An event indicating that RX data has been discarded due to lack of free RX memory. */
+ HCI_SLIP_ERROR, /**< An event indicating that an unrecoverable error has occurred. */
+ HCI_SLIP_EVT_TYPE_MAX /**< Enumeration upper bound. */
+} hci_slip_evt_type_t;
+
+/**@brief Structure containing an event from the SLIP layer.
+ */
+typedef struct
+{
+ hci_slip_evt_type_t evt_type; /**< Type of event. */
+ const uint8_t * packet; /**< This field contains a pointer to the packet for which the event relates, i.e. SLIP_TX_DONE: the packet transmitted, SLIP_RX_RDY: the packet received, SLIP_RX_OVERFLOW: The packet which overflow/or NULL if no receive buffer is available. */
+ uint32_t packet_length; /**< Packet length, i.e. SLIP_TX_DONE: Bytes transmitted, SLIP_RX_RDY: Bytes received, SLIP_RX_OVERFLOW: index at which the packet overflowed. */
+} hci_slip_evt_t;
+
+/**@brief Function for the SLIP layer event callback.
+ */
+typedef void (*hci_slip_event_handler_t)(hci_slip_evt_t event);
+
+/**@brief Function for registering the event handler provided as parameter and this event handler
+ * will be used by SLIP layer to send events described in \ref hci_slip_evt_type_t.
+ *
+ * @note Multiple registration requests will overwrite any existing registration.
+ *
+ * @param[in] event_handler This function is called by the SLIP layer upon an event.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ */
+uint32_t hci_slip_evt_handler_register(hci_slip_event_handler_t event_handler);
+
+/**@brief Function for opening the SLIP layer. This function must be called before
+ * \ref hci_slip_write and before any data can be received.
+ *
+ * @note Can be called multiple times.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ *
+ * The SLIP layer module will propagate errors from underlying sub-modules.
+ * This implementation is using UART module as a physical transmission layer, and hci_slip_open
+ * executes \ref app_uart_init . For an extended error list, please refer to \ref app_uart_init .
+ */
+uint32_t hci_slip_open(void);
+
+/**@brief Function for closing the SLIP layer. After this function is called no data can be
+ * transmitted or received in this layer.
+ *
+ * @note This function can be called multiple times and also for an unopened channel.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ */
+uint32_t hci_slip_close(void);
+
+/**@brief Function for writing a packet with SLIP encoding. Packet transmission is confirmed when
+ * the HCI_SLIP_TX_DONE event is received by the function caller.
+ *
+ * @param[in] p_buffer Pointer to the packet to transmit.
+ * @param[in] length Packet length, in bytes.
+ *
+ * @retval NRF_SUCCESS Operation success. Packet was encoded and added to the
+ * transmission queue and an event will be sent upon transmission
+ * completion.
+ * @retval NRF_ERROR_NO_MEM Operation failure. Transmission queue is full and packet was not
+ * added to the transmission queue. Application shall wait for
+ * the \ref HCI_SLIP_TX_DONE event. After HCI_SLIP_TX_DONE this
+ * function can be executed for transmission of next packet.
+ * @retval NRF_ERROR_INVALID_ADDR If a NULL pointer is provided.
+ * @retval NRF_ERROR_INVALID_STATE Operation failure. Module is not open.
+ */
+uint32_t hci_slip_write(const uint8_t * p_buffer, uint32_t length);
+
+/**@brief Function for registering a receive buffer. The receive buffer will be used for storage of
+ * received and SLIP decoded data.
+ * No data can be received by the SLIP layer until a receive buffer has been registered.
+ *
+ * @note The lifetime of the buffer must be valid during complete reception of data. A static
+ * buffer is recommended.
+ *
+ * @warning Multiple registration requests will overwrite any existing registration.
+ *
+ * @param[in] p_buffer Pointer to receive buffer. The received and SLIP decoded packet
+ * will be placed in this buffer.
+ * @param[in] length Buffer length, in bytes.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ */
+uint32_t hci_slip_rx_buffer_register(uint8_t * p_buffer, uint32_t length);
+
+#endif // HCI_SLIP_H__
+
+/** @} */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/nrf-sdk/app_common/hci_transport.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,220 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/**@file
+ *
+ * @defgroup hci_transport HCI Transport
+ * @{
+ * @ingroup app_common
+ *
+ * @brief HCI transport module implementation.
+ *
+ * This module implements certain specific features from the three-wire UART transport layer,
+ * defined by the Bluetooth specification version 4.0 [Vol 4] part D.
+ *
+ * \par Features supported
+ * - Transmission and reception of Vendor Specific HCI packet type application packets.
+ * - Transmission and reception of reliable packets: defined by chapter 6 of the specification.
+ *
+ * \par Features not supported
+ * - Link establishment procedure: defined by chapter 8 of the specification.
+ * - Low power: defined by chapter 9 of the specification.
+ *
+ * \par Implementation specific behaviour
+ * - As Link establishment procedure is not supported following static link configuration parameters
+ * are used:
+ * + TX window size is 1.
+ * + 16 bit CCITT-CRC must be used.
+ * + Out of frame software flow control not supported.
+ * + Parameters specific for resending reliable packets are compile time configurable (clarifed
+ * later in this document).
+ * + Acknowledgement packet transmissions are not timeout driven , meaning they are delivered for
+ * transmission within same context which the corresponding application packet was received.
+ *
+ * \par Implementation specific limitations
+ * Current implementation has the following limitations which will have impact to system wide
+ * behaviour:
+ * - Delayed acknowledgement scheduling not implemented:
+ * There exists a possibility that acknowledgement TX packet and application TX packet will collide
+ * in the TX pipeline having the end result that acknowledgement packet will be excluded from the TX
+ * pipeline which will trigger the retransmission algorithm within the peer protocol entity.
+ * - Delayed retransmission scheduling not implemented:
+ * There exists a possibility that retransmitted application TX packet and acknowledgement TX packet
+ * will collide in the TX pipeline having the end result that retransmitted application TX packet
+ * will be excluded from the TX pipeline.
+ * - Processing of the acknowledgement number from RX application packets:
+ * Acknowledgement number is not processed from the RX application packets having the end result
+ * that unnecessary application packet retransmissions can occur.
+ *
+ * The application TX packet processing flow is illustrated by the statemachine below.
+ *
+ * @image html hci_transport_tx_sm.png "TX - application packet statemachine"
+ *
+ * \par Component specific configuration options
+ *
+ * The following compile time configuration options are available, and used to configure the
+ * application TX packet retransmission interval, in order to suite various application specific
+ * implementations:
+ * - MAC_PACKET_SIZE_IN_BITS Maximum size of a single application packet in bits.
+ * - USED_BAUD_RATE Used uart baudrate.
+ *
+ * The following compile time configuration option is available to configure module specific
+ * behaviour:
+ * - MAX_RETRY_COUNT Max retransmission retry count for applicaton packets.
+ */
+
+#ifndef HCI_TRANSPORT_H__
+#define HCI_TRANSPORT_H__
+
+#include <stdint.h>
+#include "nrf_error.h"
+
+/**@brief Generic event callback function events. */
+typedef enum
+{
+ HCI_TRANSPORT_RX_RDY, /**< An event indicating that RX packet is ready for read. */
+ HCI_TRANSPORT_EVT_TYPE_MAX /**< Enumeration upper bound. */
+} hci_transport_evt_type_t;
+
+/**@brief Struct containing events from the Transport layer.
+ */
+typedef struct
+{
+ hci_transport_evt_type_t evt_type; /**< Type of event. */
+} hci_transport_evt_t;
+
+/**@brief Transport layer generic event callback function type.
+ *
+ * @param[in] event Transport layer event.
+ */
+typedef void (*hci_transport_event_handler_t)(hci_transport_evt_t event);
+
+/**@brief TX done event callback function result codes. */
+typedef enum
+{
+ HCI_TRANSPORT_TX_DONE_SUCCESS, /**< Transmission success, peer transport entity has acknowledged the transmission. */
+ HCI_TRANSPORT_TX_DONE_FAILURE /**< Transmission failure. */
+} hci_transport_tx_done_result_t;
+
+/**@brief Transport layer TX done event callback function type.
+ *
+ * @param[in] result TX done event result code.
+ */
+typedef void (*hci_transport_tx_done_handler_t)(hci_transport_tx_done_result_t result);
+
+/**@brief Function for registering a generic event handler.
+ *
+ * @note Multiple registration requests will overwrite any possible existing registration.
+ *
+ * @param[in] event_handler The function to be called by the transport layer upon an event.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ * @retval NRF_ERROR_NULL Operation failure. NULL pointer supplied.
+ */
+uint32_t hci_transport_evt_handler_reg(hci_transport_event_handler_t event_handler);
+
+/**@brief Function for registering a handler for TX done event.
+ *
+ * @note Multiple registration requests will overwrite any possible existing registration.
+ *
+ * @param[in] event_handler The function to be called by the transport layer upon TX done
+ * event.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ * @retval NRF_ERROR_NULL Operation failure. NULL pointer supplied.
+ */
+uint32_t hci_transport_tx_done_register(hci_transport_tx_done_handler_t event_handler);
+
+/**@brief Function for opening the transport channel and initializing the transport layer.
+ *
+ * @warning Must not be called for a channel which has been allready opened.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ * @retval NRF_ERROR_INTERNAL Operation failure. Internal error ocurred.
+ */
+uint32_t hci_transport_open(void);
+
+/**@brief Function for closing the transport channel.
+ *
+ * @note Can be called multiple times and also for not opened channel.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ */
+uint32_t hci_transport_close(void);
+
+/**@brief Function for allocating tx packet memory.
+ *
+ * @param[out] pp_memory Pointer to the packet data.
+ *
+ * @retval NRF_SUCCESS Operation success. Memory was allocated.
+ * @retval NRF_ERROR_NO_MEM Operation failure. No memory available.
+ * @retval NRF_ERROR_NULL Operation failure. NULL pointer supplied.
+ */
+uint32_t hci_transport_tx_alloc(uint8_t ** pp_memory);
+
+/**@brief Function for freeing tx packet memory.
+ *
+ * @note Memory management works in FIFO principle meaning that free order must match the alloc
+ * order.
+ *
+ * @retval NRF_SUCCESS Operation success. Memory was freed.
+ */
+uint32_t hci_transport_tx_free(void);
+
+/**@brief Function for writing a packet.
+ *
+ * @note Completion of this method does not guarantee that actual peripheral transmission would
+ * have completed.
+ *
+ * @note In case of 0 byte packet length write request, message will consist of only transport
+ * module specific headers.
+ *
+ * @retval NRF_SUCCESS Operation success. Packet was added to the transmission queue
+ * and an event will be send upon transmission completion.
+ * @retval NRF_ERROR_NO_MEM Operation failure. Transmission queue is full and packet was not
+ * added to the transmission queue. User should wait for
+ * a appropriate event prior issuing this operation again.
+ * @retval NRF_ERROR_DATA_SIZE Operation failure. Packet size exceeds limit.
+ * @retval NRF_ERROR_NULL Operation failure. NULL pointer supplied.
+ * @retval NRF_ERROR_INVALID_STATE Operation failure. Channel is not open.
+ */
+uint32_t hci_transport_pkt_write(const uint8_t * p_buffer, uint32_t length);
+
+/**@brief Function for extracting received packet.
+ *
+ * @note Extracted memory can't be reused by the underlying transport layer untill freed by call to
+ * hci_transport_rx_pkt_consume().
+ *
+ * @param[out] pp_buffer Pointer to the packet data.
+ * @param[out] p_length Length of packet data in bytes.
+ *
+ * @retval NRF_SUCCESS Operation success. Packet was extracted.
+ * @retval NRF_ERROR_NO_MEM Operation failure. No packet available to extract.
+ * @retval NRF_ERROR_NULL Operation failure. NULL pointer supplied.
+ */
+uint32_t hci_transport_rx_pkt_extract(uint8_t ** pp_buffer, uint32_t * p_length);
+
+/**@brief Function for consuming extracted packet described by p_buffer.
+ *
+ * RX memory pointed to by p_buffer is freed and can be reused by the underlying transport layer.
+ *
+ * @param[in] p_buffer Pointer to the buffer that has been consumed.
+ *
+ * @retval NRF_SUCCESS Operation success.
+ * @retval NRF_ERROR_NO_MEM Operation failure. No packet available to consume.
+ * @retval NRF_ERROR_INVALID_ADDR Operation failure. Not a valid pointer.
+ */
+uint32_t hci_transport_rx_pkt_consume(uint8_t * p_buffer);
+
+#endif // HCI_TRANSPORT_H__
+
+/** @} */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/nrf-sdk/app_common/pstorage.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,381 @@
+/* Copyright (c) 2013 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/**@file
+ *
+ * @defgroup persistent_storage Persistent Storage Interface
+ * @{
+ * @ingroup app_common
+ * @brief Abstracted flash interface.
+ *
+ * @details In order to ensure that the SDK and application be moved to alternate persistent storage
+ * options other than the default provided with NRF solution, an abstracted interface is provided
+ * by the module to ensure SDK modules and application can be ported to alternate option with ease.
+ */
+
+#ifndef PSTORAGE_H__
+#define PSTORAGE_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif /* #ifdef __cplusplus */
+
+#include "pstorage_platform.h"
+
+
+/**@defgroup ps_opcode Persistent Storage Access Operation Codes
+ * @{
+ * @brief Persistent Storage Access Operation Codes. These are used to report any error during
+ * a persistent storage access operation or any general error that may occur in the
+ * interface.
+ *
+ * @details Persistent Storage Access Operation Codes used in error notification callback
+ * registered with the interface to report any error during an persistent storage access
+ * operation or any general error that may occur in the interface.
+ */
+#define PSTORAGE_ERROR_OP_CODE 0x01 /**< General Error Code */
+#define PSTORAGE_STORE_OP_CODE 0x02 /**< Error when Store Operation was requested */
+#define PSTORAGE_LOAD_OP_CODE 0x03 /**< Error when Load Operation was requested */
+#define PSTORAGE_CLEAR_OP_CODE 0x04 /**< Error when Clear Operation was requested */
+#define PSTORAGE_UPDATE_OP_CODE 0x05 /**< Update an already touched storage block */
+
+/**@} */
+
+/**@defgroup pstorage_data_types Persistent Memory Interface Data Types
+ * @{
+ * @brief Data Types needed for interfacing with persistent memory.
+ *
+ * @details Data Types needed for interfacing with persistent memory.
+ */
+
+/**@brief Persistent Storage Error Reporting Callback
+ *
+ * @details Persistent Storage Error Reporting Callback that is used by the interface to report
+ * success or failure of a flash operation. Therefore, for any operations, application
+ * can know when the procedure was complete. For store operation, since no data copy
+ * is made, receiving a success or failure notification, indicated by the reason
+ * parameter of callback is an indication that the resident memory could now be reused
+ * or freed, as the case may be.
+ *
+ * @param[in] handle Identifies module and block for which callback is received.
+ * @param[in] op_code Identifies the operation for which the event is notified.
+ * @param[in] result Identifies the result of flash access operation.
+ * NRF_SUCCESS implies, operation succeeded.
+ * @param[in] p_data Identifies the application data pointer. In case of store operation, this
+ * points to the resident source of application memory that application can now
+ * free or reuse. In case of clear, this is NULL as no application pointer is
+ * needed for this operation.
+ * @param[in] data_len Length data application had provided for the operation.
+ *
+ */
+typedef void (*pstorage_ntf_cb_t)(pstorage_handle_t * p_handle,
+ uint8_t op_code,
+ uint32_t result,
+ uint8_t * p_data,
+ uint32_t data_len);
+
+
+typedef struct
+{
+ pstorage_ntf_cb_t cb; /**< Callback registered with the module to be notified of any error occurring in persistent memory management */
+ pstorage_size_t block_size; /**< Desired block size for persistent memory storage, for example, if a module has a table with 10 entries, each entry is size 64 bytes,
+ * it can request 10 blocks with block size 64 bytes. On the other hand, the module can also request one block of size 640 based on
+ * how it would like to access or alter memory in persistent memory.
+ * First option is preferred when single entries that need to be updated often when having no impact on the other entries.
+ * While second option is preferred when entries of table are not changed on individually but have common point of loading and storing
+ * data. */
+ pstorage_size_t block_count; /** Number of blocks requested by the module, minimum values is 1. */
+} pstorage_module_param_t;
+
+/**@} */
+
+/**@defgroup pstorage_routines Persistent Storage Access Routines
+ * @{
+ * @brief Functions/Interface SDK modules use to persistently store data.
+ *
+ * @details Interface for Application & SDK module to load/store information persistently.
+ * Note: that while implementation of each of the persistent storage access function
+ * depends on the system and can specific to system/solution, the signature of the
+ * interface routines should not be altered.
+ */
+
+/**@brief Module Initialization Routine.
+ *
+ * @details Initializes module. To be called once before any other APIs of the module are used.
+ *
+ * @retval NRF_SUCCESS on success, else an error code indicating reason for failure.
+ */
+uint32_t pstorage_init(void);
+
+
+/**@brief Register with persistent storage interface.
+ *
+ * @param[in] p_module_param Module registration param.
+ * @param[out] p_block_id Block identifier to identify persistent memory blocks in case
+ * registration succeeds. Application is expected to use the block ids
+ * for subsequent operations on requested persistent memory. Maximum
+ * registrations permitted is determined by configuration parameter
+ * PSTORAGE_MAX_APPLICATIONS.
+ * In case more than one memory blocks are requested, the identifier provided here is
+ * the base identifier for the first block and to identify subsequent block,
+ * application shall use \@ref pstorage_block_identifier_get with this base identifier
+ * and block number. Therefore if 10 blocks of size 64 are requested and application
+ * wishes to store memory in 6th block, it shall use
+ * \@ref pstorage_block_identifier_get with based id and provide a block number of 5.
+ * This way application is only expected to remember the base block identifier.
+ *
+ * @retval NRF_SUCCESS on success, else an error code indicating reason for failure.
+ * @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ * @retval NRF_ERROR_INVALID_PARAM if invalid parameters are passed to the API.
+ * @retval NRF_ERROR_NO_MEM in case no more registrations can be supported.
+ */
+uint32_t pstorage_register(pstorage_module_param_t * p_module_param,
+ pstorage_handle_t * p_block_id);
+
+
+/**
+ * @brief Function to get block id with reference to base block identifier provided at time of
+ * registration.
+ *
+ * @details Function to get block id with reference to base block identifier provided at time of
+ * registration.
+ * In case more than one memory blocks were requested when registering, the identifier
+ * provided here is the base identifier for the first block and to identify subsequent
+ * block, application shall use this routine to get block identifier providing input as
+ * base identifier and block number. Therefore if 10 blocks of size 64 are requested and
+ * application wishes to store memory in 6th block, it shall use
+ * \@ref pstorage_block_identifier_get with based id and provide a block number of 5.
+ * This way application is only expected to remember the base block identifier.
+ *
+ * @param[in] p_base_id Base block id received at the time of registration.
+ * @param[in] block_num Block Number, with first block numbered zero.
+ * @param[out] p_block_id Block identifier for the block number requested in case the API succeeds.
+ *
+ * @retval NRF_SUCCESS on success, else an error code indicating reason for failure.
+ * @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ * @retval NRF_ERROR_INVALID_PARAM if invalid parameters are passed to the API.
+ */
+uint32_t pstorage_block_identifier_get(pstorage_handle_t * p_base_id,
+ pstorage_size_t block_num,
+ pstorage_handle_t * p_block_id);
+
+
+/**@brief Routine to persistently store data of length 'size' contained in 'p_src' address
+ * in storage module at 'p_dest' address; Equivalent to Storage Write.
+ *
+ * @param[in] p_dest Destination address where data is to be stored persistently.
+ * @param[in] p_src Source address containing data to be stored. API assumes this to be resident
+ * memory and no intermediate copy of data is made by the API.
+ * @param[in] size Size of data to be stored expressed in bytes. Should be word aligned.
+ * @param[in] offset Offset in bytes to be applied when writing to the block.
+ * For example, if within a block of 100 bytes, application wishes to
+ * write 20 bytes at offset of 12, then this field should be set to 12.
+ * Should be word aligned.
+ *
+ * @retval NRF_SUCCESS on success, else an error code indicating reason for failure.
+ * @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ * @retval NRF_ERROR_INVALID_PARAM if invalid parameters are passed to the API.
+ * @retval NRF_ERROR_INVALID_ADDR in case data address 'p_src' is not aligned.
+ * @retval NRF_ERROR_NO_MEM in case request cannot be processed.
+ *
+ * @warning No copy of the data is made, and hence memory provided for data source to be written
+ * to flash cannot be freed or reused by the application until this procedure
+ * is complete. End of this procedure is notified to the application using the
+ * notification callback registered by the application.
+ */
+uint32_t pstorage_store(pstorage_handle_t * p_dest,
+ uint8_t * p_src,
+ pstorage_size_t size,
+ pstorage_size_t offset);
+
+/**@brief Routine to update persistently stored data of length 'size' contained in 'p_src' address
+ * in storage module at 'p_dest' address.
+ *
+ * @param[in] p_dest Destination address where data is to be updated.
+ * @param[in] p_src Source address containing data to be stored. API assumes this to be resident
+ * memory and no intermediate copy of data is made by the API.
+ * @param[in] size Size of data to be stored expressed in bytes. Should be word aligned.
+ * @param[in] offset Offset in bytes to be applied when writing to the block.
+ * For example, if within a block of 100 bytes, application wishes to
+ * write 20 bytes at offset of 12, then this field should be set to 12.
+ * Should be word aligned.
+ *
+ * @retval NRF_SUCCESS on success, else an error code indicating reason for failure.
+ * @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ * @retval NRF_ERROR_INVALID_PARAM if invalid parameters are passed to the API.
+ * @retval NRF_ERROR_INVALID_ADDR in case data address 'p_src' is not aligned.
+ * @retval NRF_ERROR_NO_MEM in case request cannot be processed.
+ *
+ * @warning No copy of the data is made, and hence memory provided for data source to be written
+ * to flash cannot be freed or reused by the application until this procedure
+ * is complete. End of this procedure is notified to the application using the
+ * notification callback registered by the application.
+ */
+uint32_t pstorage_update(pstorage_handle_t * p_dest,
+ uint8_t * p_src,
+ pstorage_size_t size,
+ pstorage_size_t offset);
+
+/**@brief Routine to load persistently stored data of length 'size' from 'p_src' address
+ * to 'p_dest' address; Equivalent to Storage Read.
+ *
+ * @param[in] p_dest Destination address where persistently stored data is to be loaded.
+ * @param[in] p_src Source from where data is to be loaded from persistent memory.
+ * @param[in] size Size of data to be loaded from persistent memory expressed in bytes.
+ * Should be word aligned.
+ * @param[in] offset Offset in bytes to be applied when loading from the block.
+ * For example, if within a block of 100 bytes, application wishes to
+ * load 20 bytes from offset of 12, then this field should be set to 12.
+ * Should be word aligned.
+ *
+ * @retval NRF_SUCCESS on success, else an error code indicating reason for failure.
+ * @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ * @retval NRF_ERROR_INVALID_PARAM if invalid parameters are passed to the API.
+ * @retval NRF_ERROR_INVALID_ADDR in case data address 'p_dst' is not aligned.
+ * @retval NRF_ERROR_NO_MEM in case request cannot be processed.
+ */
+uint32_t pstorage_load(uint8_t * p_dest,
+ pstorage_handle_t * p_src,
+ pstorage_size_t size,
+ pstorage_size_t offset);
+
+/**@brief Routine to clear data in persistent memory.
+ *
+ * @param[in] p_base_id Base block identifier in persistent memory that needs to cleared;
+ * Equivalent to an Erase Operation.
+ *
+ * @param[in] size Size of data to be cleared from persistent memory expressed in bytes.
+ * This parameter is to provision for clearing of certain blocks
+ * of memory, or all memory blocks in a registered module. If the total size
+ * of the application module is used (blocks * block size) in combination with
+ * the identifier for the first block in the module, all blocks in the
+ * module will be erased.
+ *
+ * @retval NRF_SUCCESS on success, else an error code indicating reason for failure.
+ * @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ * @retval NRF_ERROR_INVALID_PARAM if invalid parameters are passed to the API.
+ * @retval NRF_ERROR_INVALID_ADDR in case data address 'p_dst' is not aligned.
+ * @retval NRF_ERROR_NO_MEM in case request cannot be processed.
+ *
+ * @note Clear operations may take time. This API however, does not block until the clear
+ * procedure is complete. Application is notified of procedure completion using
+ * notification callback registered by the application. 'result' parameter of the
+ * callback suggests if the procedure was successful or not.
+ */
+uint32_t pstorage_clear(pstorage_handle_t * p_base_id, pstorage_size_t size);
+
+/**
+ * @brief API to get status of number of pending operations with the module.
+ *
+ * @param[out] p_count Number of storage operations pending with the module, if 0,
+ * there are no outstanding requests.
+ *
+ * @retval NRF_SUCCESS on success, else an error code indicating reason for failure.
+ * @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ */
+uint32_t pstorage_access_status_get(uint32_t * p_count);
+
+#ifdef PSTORAGE_RAW_MODE_ENABLE
+
+/**@brief Function for registering with persistent storage interface.
+ *
+ * @param[in] p_module_param Module registration param.
+ * @param[out] p_block_id Block identifier to identify persistent memory blocks in case
+ * registration succeeds. Application is expected to use the block ids
+ * for subsequent operations on requested persistent memory.
+ * In case more than one memory blocks are requested, the identifier provided here is
+ * the base identifier for the first block and to identify subsequent block,
+ * application shall use \@ref pstorage_block_identifier_get with this base identifier
+ * and block number. Therefore if 10 blocks of size 64 are requested and application
+ * wishes to store memory in 6th block, it shall use
+ * \@ref pstorage_block_identifier_get with based id and provide a block number of 5.
+ * This way application is only expected to remember the base block identifier.
+ *
+ * @retval NRF_SUCCESS on success, else an error code indicating reason for failure.
+ * @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ * @retval NRF_ERROR_INVALID_PARAM if invalid parameters are passed to the API.
+ * @retval NRF_ERROR_NO_MEM in case no more registrations can be supported.
+ */
+uint32_t pstorage_raw_register(pstorage_module_param_t * p_module_param,
+ pstorage_handle_t * p_block_id);
+
+/**@brief Raw mode function for persistently storing data of length 'size' contained in 'p_src'
+ * address in storage module at 'p_dest' address; Equivalent to Storage Write.
+ *
+ * @param[in] p_dest Destination address where data is to be stored persistently.
+ * @param[in] p_src Source address containing data to be stored. API assumes this to be resident
+ * memory and no intermediate copy of data is made by the API.
+ * @param[in] size Size of data to be stored expressed in bytes. Should be word aligned.
+ * @param[in] offset Offset in bytes to be applied when writing to the block.
+ * For example, if within a block of 100 bytes, application wishes to
+ * write 20 bytes at offset of 12, then this field should be set to 12.
+ * Should be word aligned.
+ *
+ * @retval NRF_SUCCESS on success, else an error code indicating reason for failure.
+ * @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ * @retval NRF_ERROR_INVALID_PARAM if invalid parameters are passed to the API.
+ * @retval NRF_ERROR_INVALID_ADDR in case data address 'p_src' is not aligned.
+ * @retval NRF_ERROR_NO_MEM in case request cannot be processed.
+ *
+ * @warning No copy of the data is made, and hence memory provided for data source to be written
+ * to flash cannot be freed or reused by the application until this procedure
+ * is complete. End of this procedure is notified to the application using the
+ * notification callback registered by the application.
+ */
+uint32_t pstorage_raw_store(pstorage_handle_t * p_dest,
+ uint8_t * p_src,
+ pstorage_size_t size,
+ pstorage_size_t offset);
+
+/**@brief Function for clearing data in persistent memory in raw mode.
+ *
+ * @param[in] p_dest Base block identifier in persistent memory that needs to cleared;
+ * Equivalent to an Erase Operation.
+ * @param[in] size Size of data to be cleared from persistent memory expressed in bytes.
+ * This is currently unused. And a clear would mean clearing all blocks,
+ * however, this parameter is to provision for clearing of certain blocks
+ * of memory only and not all if need be.
+ *
+ * @retval NRF_SUCCESS on success, else an error code indicating reason for failure.
+ * @retval NRF_ERROR_INVALID_STATE is returned is API is called without module initialization.
+ * @retval NRF_ERROR_NULL if NULL parameter has been passed.
+ * @retval NRF_ERROR_INVALID_PARAM if invalid parameters are passed to the API.
+ * @retval NRF_ERROR_NO_MEM in case request cannot be processed.
+ *
+ * @note Clear operations may take time. This API however, does not block until the clear
+ * procedure is complete. Application is notified of procedure completion using
+ * notification callback registered by the application. 'result' parameter of the
+ * callback suggests if the procedure was successful or not.
+ */
+uint32_t pstorage_raw_clear(pstorage_handle_t * p_dest, pstorage_size_t size);
+
+#endif // PSTORAGE_RAW_MODE_ENABLE
+
+#ifdef __cplusplus
+}
+#endif /* #ifdef __cplusplus */
+
+
+/**@} */
+/**@} */
+
+#endif // PSTORAGE_H__
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/nrf-sdk/nrf_delay.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,74 @@
+#ifndef _NRF_DELAY_H
+#define _NRF_DELAY_H
+
+// #include "nrf.h"
+
+/*lint --e{438, 522} "Variable not used" "Function lacks side-effects" */
+#if defined ( __CC_ARM )
+static __ASM void __INLINE nrf_delay_us(uint32_t volatile number_of_us)
+{
+loop
+ SUBS R0, R0, #1
+ NOP
+ NOP
+ NOP
+ NOP
+ NOP
+ NOP
+ NOP
+ NOP
+ NOP
+ NOP
+ NOP
+ NOP
+ BNE loop
+ BX LR
+}
+#elif defined ( __ICCARM__ )
+static void __INLINE nrf_delay_us(uint32_t volatile number_of_us)
+{
+__ASM (
+"loop:\n\t"
+ " SUBS R0, R0, #1\n\t"
+ " NOP\n\t"
+ " NOP\n\t"
+ " NOP\n\t"
+ " NOP\n\t"
+ " NOP\n\t"
+ " NOP\n\t"
+ " NOP\n\t"
+ " NOP\n\t"
+ " NOP\n\t"
+ " NOP\n\t"
+ " NOP\n\t"
+ " NOP\n\t"
+ " BNE loop\n\t");
+}
+#elif defined ( __GNUC__ )
+static void __INLINE nrf_delay_us(uint32_t volatile number_of_us)
+{
+ do
+ {
+ __ASM volatile (
+ "NOP\n\t"
+ "NOP\n\t"
+ "NOP\n\t"
+ "NOP\n\t"
+ "NOP\n\t"
+ "NOP\n\t"
+ "NOP\n\t"
+ "NOP\n\t"
+ "NOP\n\t"
+ "NOP\n\t"
+ "NOP\n\t"
+ "NOP\n\t"
+ "NOP\n\t"
+ "NOP\n\t"
+ );
+ } while (--number_of_us);
+}
+#endif
+
+void nrf_delay_ms(uint32_t volatile number_of_ms);
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/nrf-sdk/sd_common/app_util_platform.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,110 @@
+/* Copyright (c) 2014 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+/**@file
+ *
+ * @defgroup app_util_platform Utility Functions and Definitions (Platform)
+ * @{
+ * @ingroup app_common
+ *
+ * @brief Various types and definitions available to all applications when using SoftDevice.
+ */
+
+#ifndef APP_UTIL_PLATFORM_H__
+#define APP_UTIL_PLATFORM_H__
+
+#include <stdint.h>
+#include "compiler_abstraction.h"
+#include "nrf51.h"
+#include "app_error.h"
+
+/**@brief The interrupt priorities available to the application while the SoftDevice is active. */
+typedef enum
+{
+ APP_IRQ_PRIORITY_HIGH = 1,
+ APP_IRQ_PRIORITY_LOW = 3
+} app_irq_priority_t;
+
+#define NRF_APP_PRIORITY_THREAD 4 /**< "Interrupt level" when running in Thread Mode. */
+
+/**@cond NO_DOXYGEN */
+#define EXTERNAL_INT_VECTOR_OFFSET 16
+/**@endcond */
+
+#define PACKED(TYPE) __packed TYPE
+
+/**@brief Macro for entering a critical region.
+ *
+ * @note Due to implementation details, there must exist one and only one call to
+ * CRITICAL_REGION_EXIT() for each call to CRITICAL_REGION_ENTER(), and they must be located
+ * in the same scope.
+ */
+#define CRITICAL_REGION_ENTER() \
+ { \
+ uint8_t IS_NESTED_CRITICAL_REGION = 0; \
+ uint32_t CURRENT_INT_PRI = current_int_priority_get(); \
+ if (CURRENT_INT_PRI != APP_IRQ_PRIORITY_HIGH) \
+ { \
+ uint32_t ERR_CODE = sd_nvic_critical_region_enter(&IS_NESTED_CRITICAL_REGION); \
+ if (ERR_CODE == NRF_ERROR_SOFTDEVICE_NOT_ENABLED) \
+ { \
+ __disable_irq(); \
+ } \
+ else \
+ { \
+ APP_ERROR_CHECK(ERR_CODE); \
+ } \
+ }
+
+/**@brief Macro for leaving a critical region.
+ *
+ * @note Due to implementation details, there must exist one and only one call to
+ * CRITICAL_REGION_EXIT() for each call to CRITICAL_REGION_ENTER(), and they must be located
+ * in the same scope.
+ */
+#define CRITICAL_REGION_EXIT() \
+ if (CURRENT_INT_PRI != APP_IRQ_PRIORITY_HIGH) \
+ { \
+ uint32_t ERR_CODE; \
+ __enable_irq(); \
+ ERR_CODE = sd_nvic_critical_region_exit(IS_NESTED_CRITICAL_REGION); \
+ if (ERR_CODE != NRF_ERROR_SOFTDEVICE_NOT_ENABLED) \
+ { \
+ APP_ERROR_CHECK(ERR_CODE); \
+ } \
+ } \
+ }
+
+/**@brief Function for finding the current interrupt level.
+ *
+ * @return Current interrupt level.
+ * @retval APP_IRQ_PRIORITY_HIGH We are running in Application High interrupt level.
+ * @retval APP_IRQ_PRIORITY_LOW We are running in Application Low interrupt level.
+ * @retval APP_IRQ_PRIORITY_THREAD We are running in Thread Mode.
+ */
+static __INLINE uint8_t current_int_priority_get(void)
+{
+ uint32_t isr_vector_num = (SCB->ICSR & SCB_ICSR_VECTACTIVE_Msk);
+ if (isr_vector_num > 0)
+ {
+ int32_t irq_type = ((int32_t)isr_vector_num - EXTERNAL_INT_VECTOR_OFFSET);
+ return (NVIC_GetPriority((IRQn_Type)irq_type) & 0xFF);
+ }
+ else
+ {
+ return NRF_APP_PRIORITY_THREAD;
+ }
+}
+
+#endif // APP_UTIL_PLATFORM_H__
+
+/** @} */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/s110_nrf51822_7_1_0/s110_nrf51822_7.1.0_API/include/ble.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,419 @@
+/* Copyright (c) 2011 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+/**
+ @addtogroup BLE_COMMON BLE SoftDevice Common
+ @{
+ @defgroup ble_api Events, type definitions and API calls
+ @{
+
+ @brief Module independent events, type definitions and API calls for the S110 SoftDevice.
+
+ */
+
+#ifndef BLE_H__
+#define BLE_H__
+
+#include "ble_ranges.h"
+#include "ble_types.h"
+#include "ble_gap.h"
+#include "ble_l2cap.h"
+#include "ble_gatt.h"
+#include "ble_gattc.h"
+#include "ble_gatts.h"
+
+/** @addtogroup BLE_COMMON_ENUMERATIONS Enumerations
+ * @{ */
+
+/**
+ * @brief Common API SVC numbers.
+ */
+enum BLE_COMMON_SVCS
+{
+ SD_BLE_ENABLE = BLE_SVC_BASE, /**< Enable and initialize the BLE stack */
+ SD_BLE_EVT_GET, /**< Get an event from the pending events queue. */
+ SD_BLE_TX_BUFFER_COUNT_GET, /**< Get the total number of available application transmission buffers from the stack. */
+ SD_BLE_UUID_VS_ADD, /**< Add a Vendor Specific UUID. */
+ SD_BLE_UUID_DECODE, /**< Decode UUID bytes. */
+ SD_BLE_UUID_ENCODE, /**< Encode UUID bytes. */
+ SD_BLE_VERSION_GET, /**< Get the local version information (company id, Link Layer Version, Link Layer Subversion). */
+ SD_BLE_USER_MEM_REPLY, /**< User Memory Reply. */
+ SD_BLE_OPT_SET, /**< Set a BLE option. */
+ SD_BLE_OPT_GET, /**< Get a BLE option. */
+};
+
+/**@brief Common Option IDs.
+ * IDs that uniquely identify a common option.
+ */
+enum BLE_COMMON_OPTS
+{
+ BLE_COMMON_OPT_RADIO_CPU_MUTEX = BLE_OPT_BASE /**< Radio CPU mutex option. @ref ble_common_opt_radio_cpu_mutex_t */
+};
+/** @} */
+
+/** @addtogroup BLE_COMMON_DEFINES Defines
+ * @{ */
+
+/** @brief Required pointer alignment for BLE Events.
+*/
+#define BLE_EVTS_PTR_ALIGNMENT 4
+
+/** @defgroup BLE_USER_MEM_TYPES User Memory Types
+ * @{ */
+#define BLE_USER_MEM_TYPE_INVALID 0x00 /**< Invalid User Memory Types. */
+#define BLE_USER_MEM_TYPE_GATTS_QUEUED_WRITES 0x01 /**< User Memory for GATTS queued writes. */
+/** @} */
+
+/** @brief Maximum number of Vendor Specific UUIDs.
+*/
+#define BLE_UUID_VS_MAX_COUNT 10
+
+/** @} */
+
+/** @addtogroup BLE_COMMON_STRUCTURES Structures
+ * @{ */
+
+/**
+ * @brief BLE Module Independent Event IDs.
+ */
+enum BLE_COMMON_EVTS
+{
+ BLE_EVT_TX_COMPLETE = BLE_EVT_BASE, /**< Transmission Complete. */
+ BLE_EVT_USER_MEM_REQUEST, /**< User Memory request. */
+ BLE_EVT_USER_MEM_RELEASE /**< User Memory release. */
+};
+
+/**@brief User Memory Block. */
+typedef struct
+{
+ uint8_t* p_mem; /**< Pointer to the start of the user memory block. */
+ uint16_t len; /**< Length in bytes of the user memory block. */
+} ble_user_mem_block_t;
+
+/**
+ * @brief TX complete event.
+ */
+typedef struct
+{
+ uint8_t count; /**< Number of packets transmitted. */
+} ble_evt_tx_complete_t;
+
+/**@brief Event structure for BLE_EVT_USER_MEM_REQUEST. */
+typedef struct
+{
+ uint8_t type; /**< User memory type, see @ref BLE_USER_MEM_TYPES. */
+} ble_evt_user_mem_request_t;
+
+/**@brief Event structure for BLE_EVT_USER_MEM_RELEASE. */
+typedef struct
+{
+ uint8_t type; /**< User memory type, see @ref BLE_USER_MEM_TYPES. */
+ ble_user_mem_block_t mem_block; /**< User memory block */
+} ble_evt_user_mem_release_t;
+
+
+/**@brief Event structure for events not associated with a specific function module. */
+typedef struct
+{
+ uint16_t conn_handle; /**< Connection Handle on which this event occured. */
+ union
+ {
+ ble_evt_tx_complete_t tx_complete; /**< Transmission Complete. */
+ ble_evt_user_mem_request_t user_mem_request; /**< User Memory Request Event Parameters. */
+ ble_evt_user_mem_release_t user_mem_release; /**< User Memory Release Event Parameters. */
+ } params;
+} ble_common_evt_t;
+
+/**@brief BLE Event header. */
+typedef struct
+{
+ uint16_t evt_id; /**< Value from a BLE_<module>_EVT series. */
+ uint16_t evt_len; /**< Length in octets excluding this header. */
+} ble_evt_hdr_t;
+
+/**@brief Common BLE Event type, wrapping the module specific event reports. */
+typedef struct
+{
+ ble_evt_hdr_t header; /**< Event header. */
+ union
+ {
+ ble_common_evt_t common_evt; /**< Common Event, evt_id in BLE_EVT_* series. */
+ ble_gap_evt_t gap_evt; /**< GAP originated event, evt_id in BLE_GAP_EVT_* series. */
+ ble_l2cap_evt_t l2cap_evt; /**< L2CAP originated event, evt_id in BLE_L2CAP_EVT* series. */
+ ble_gattc_evt_t gattc_evt; /**< GATT client originated event, evt_id in BLE_GATTC_EVT* series. */
+ ble_gatts_evt_t gatts_evt; /**< GATT server originated event, evt_id in BLE_GATTS_EVT* series. */
+ } evt;
+} ble_evt_t;
+
+
+/**
+ * @brief Version Information.
+ */
+typedef struct
+{
+ uint8_t version_number; /**< Link Layer Version number for BT 4.1 spec is 7 (https://www.bluetooth.org/en-us/specification/assigned-numbers/link-layer). */
+ uint16_t company_id; /**< Company ID, Nordic Semiconductor's company ID is 89 (0x0059) (https://www.bluetooth.org/apps/content/Default.aspx?doc_id=49708). */
+ uint16_t subversion_number; /**< Link Layer Sub Version number, corresponds to the SoftDevice Config ID or Firmware ID (FWID). */
+} ble_version_t;
+
+/**@brief Mutual exclusion of radio activity and CPU execution.
+ *
+ * This option configures the application's access to the CPU when the radio is active. The
+ * application can configure itself to have access to the CPU while the radio is active.
+ * By default, the application will be not able to share CPU time with the SoftDevice
+ * during radio activity. This parameter structure is used together with @ref sd_ble_opt_set
+ * to configure the @ref BLE_COMMON_OPT_RADIO_CPU_MUTEX option.
+ *
+ * @note Note that the mutual exclusion of radio activity and CPU execution should remain enabled
+ * when running the SoftDevice on hardware affected by PAN #44 "CCM may exceed real time
+ * requirements"and PAN #45 "AAR may exceed real time requirements".
+ *
+ * @note @ref sd_ble_opt_get is not supported for this option.
+ *
+ */
+typedef struct
+{
+ uint8_t enable : 1; /**< Enable mutual exclusion of radio activity and the CPU execution. */
+} ble_common_opt_radio_cpu_mutex_t;
+
+/**@brief Option structure for common options. */
+typedef union
+{
+ ble_common_opt_radio_cpu_mutex_t radio_cpu_mutex; /**< Parameters for the option for the mutual exclusion of radio activity and CPU execution. */
+} ble_common_opt_t;
+
+/**@brief Common BLE Option type, wrapping the module specific options. */
+typedef union
+{
+ ble_common_opt_t common_opt; /**< Common option, opt_id in BLE_COMMON_OPT_* series. */
+ ble_gap_opt_t gap; /**< GAP option, opt_id in BLE_GAP_OPT_* series. */
+} ble_opt_t;
+
+/**
+ * @brief BLE GATTS init options
+ */
+typedef struct
+{
+ ble_gatts_enable_params_t gatts_enable_params; /**< GATTS init options @ref ble_gatts_enable_params_t. */
+} ble_enable_params_t;
+
+/** @} */
+
+/** @addtogroup BLE_COMMON_FUNCTIONS Functions
+ * @{ */
+
+/**@brief Enable the bluetooth stack
+ *
+ * @param[in] p_ble_enable_params Pointer to ble_enable_params_t
+ *
+ * @details This call initializes the bluetooth stack, no other BLE related call can be called before this one has been executed.
+ *
+ * @return @ref NRF_SUCCESS BLE stack has been initialized successfully
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid or not sufficiently aligned pointer supplied.
+ */
+SVCALL(SD_BLE_ENABLE, uint32_t, sd_ble_enable(ble_enable_params_t * p_ble_enable_params));
+
+/**@brief Get an event from the pending events queue.
+ *
+ * @param[in] p_dest Pointer to buffer to be filled in with an event, or NULL to retrieve the event length. This buffer <b>must be 4-byte aligned in memory</b>.
+ * @param[in, out] p_len Pointer the length of the buffer, on return it is filled with the event length.
+ *
+ * @details This call allows the application to pull a BLE event from the BLE stack. The application is signalled that an event is
+ * available from the BLE Stack by the triggering of the SD_EVT_IRQn interrupt (mapped to IRQ 22).
+ * The application is free to choose whether to call this function from thread mode (main context) or directly from the Interrupt Service Routine
+ * that maps to SD_EVT_IRQn. In any case however, and because the BLE stack runs at a higher priority than the application, this function should be called
+ * in a loop (until @ref NRF_ERROR_NOT_FOUND is returned) every time SD_EVT_IRQn is raised to ensure that all available events are pulled from the stack.
+ * Failure to do so could potentially leave events in the internal queue without the application being aware of this fact.
+ * Sizing the p_dest buffer is equally important, since the application needs to provide all the memory necessary for the event to be copied into
+ * application memory. If the buffer provided is not large enough to fit the entire contents of the event, @ref NRF_ERROR_DATA_SIZE will be returned
+ * and the application can then call again with a larger buffer size.
+ * Please note that because of the variable length nature of some events, sizeof(ble_evt_t) will not always be large enough to fit certain events,
+ * and so it is the application's responsability to provide an amount of memory large enough so that the relevant event is copied in full.
+ * The application may "peek" the event length by providing p_dest as a NULL pointer and inspecting the value of *p_len upon return.
+ *
+ * @note The pointer supplied must be aligned to the extend defined by @ref BLE_EVTS_PTR_ALIGNMENT
+ *
+ * @return @ref NRF_SUCCESS Event pulled and stored into the supplied buffer.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid or not sufficiently aligned pointer supplied.
+ * @return @ref NRF_ERROR_NOT_FOUND No events ready to be pulled.
+ * @return @ref NRF_ERROR_DATA_SIZE Event ready but could not fit into the supplied buffer.
+ */
+SVCALL(SD_BLE_EVT_GET, uint32_t, sd_ble_evt_get(uint8_t* p_dest, uint16_t *p_len));
+
+
+/**@brief Get the total number of available application transmission buffers in the BLE stack.
+ *
+ * @details This call allows the application to obtain the total number of
+ * transmission buffers available for application data. Please note that
+ * this does not give the number of free buffers, but rather the total amount of them.
+ * The application has two options to handle its own application transmission buffers:
+ * - Use a simple arithmetic calculation: at boot time the application should use this function
+ * to find out the total amount of buffers available to it and store it in a variable.
+ * Every time a packet that consumes an application buffer is sent using any of the
+ * exposed functions in this BLE API, the application should decrement that variable.
+ * Conversely, whenever a @ref BLE_EVT_TX_COMPLETE event is received by the application
+ * it should retrieve the count field in such event and add that number to the same
+ * variable storing the number of available packets.
+ * This mechanism allows the application to be aware at any time of the number of
+ * application packets available in the BLE stack's internal buffers, and therefore
+ * it can know with certainty whether it is possible to send more data or it has to
+ * wait for a @ref BLE_EVT_TX_COMPLETE event before it proceeds.
+ * - Choose to simply not keep track of available buffers at all, and instead handle the
+ * @ref BLE_ERROR_NO_TX_BUFFERS error by queueing the packet to be transmitted and
+ * try again as soon as a @ref BLE_EVT_TX_COMPLETE event arrives.
+ *
+ * The API functions that <b>may</b> consume an application buffer depending on
+ * the parameters supplied to them can be found below:
+ *
+ * - @ref sd_ble_gattc_write (write witout response only)
+ * - @ref sd_ble_gatts_hvx (notifications only)
+ * - @ref sd_ble_l2cap_tx (all packets)
+ *
+ * @param[out] p_count Pointer to a uint8_t which will contain the number of application transmission buffers upon
+ * successful return.
+ *
+ * @return @ref NRF_SUCCESS Number of application transmission buffers retrieved successfully.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ */
+SVCALL(SD_BLE_TX_BUFFER_COUNT_GET, uint32_t, sd_ble_tx_buffer_count_get(uint8_t* p_count));
+
+
+/**@brief Add a Vendor Specific UUID.
+ *
+ * @details This call enables the application to add a vendor specific UUID to the BLE stack's table,
+ * for later use all other modules and APIs. This then allows the application to use the shorter,
+ * 24-bit @ref ble_uuid_t format when dealing with both 16-bit and 128-bit UUIDs without having to
+ * check for lengths and having split code paths. The way that this is accomplished is by extending the
+ * grouping mechanism that the Bluetooth SIG standard base UUID uses for all other 128-bit UUIDs. The
+ * type field in the @ref ble_uuid_t structure is an index (relative to @ref BLE_UUID_TYPE_VENDOR_BEGIN)
+ * to the table populated by multiple calls to this function, and the uuid field in the same structure
+ * contains the 2 bytes at indices 12 and 13. The number of possible 128-bit UUIDs available to the
+ * application is therefore the number of Vendor Specific UUIDs added with the help of this function times 65536,
+ * although restricted to modifying bytes 12 and 13 for each of the entries in the supplied array.
+ *
+ * @note Bytes 12 and 13 of the provided UUID will not be used internally, since those are always replaced by
+ * the 16-bit uuid field in @ref ble_uuid_t.
+ *
+ *
+ * @param[in] p_vs_uuid Pointer to a 16-octet (128-bit) little endian Vendor Specific UUID disregarding
+ * bytes 12 and 13.
+ * @param[out] p_uuid_type Pointer where the type field in @ref ble_uuid_t corresponding to this UUID will be stored.
+ *
+ * @return @ref NRF_SUCCESS Successfully added the Vendor Specific UUID.
+ * @return @ref NRF_ERROR_INVALID_ADDR If p_vs_uuid or p_uuid_type is NULL or invalid.
+ * @return @ref NRF_ERROR_NO_MEM If there are no more free slots for VS UUIDs.
+ * @return @ref NRF_ERROR_FORBIDDEN If p_vs_uuid has already been added to the VS UUID table.
+ */
+SVCALL(SD_BLE_UUID_VS_ADD, uint32_t, sd_ble_uuid_vs_add(ble_uuid128_t const * const p_vs_uuid, uint8_t * const p_uuid_type));
+
+
+/** @brief Decode little endian raw UUID bytes (16-bit or 128-bit) into a 24 bit @ref ble_uuid_t structure.
+ *
+ * @details The raw UUID bytes excluding bytes 12 and 13 (i.e. bytes 0-11 and 14-15) of p_uuid_le are compared
+ * to the corresponding ones in each entry of the table of vendor specific UUIDs pouplated with @ref sd_ble_uuid_vs_add
+ * to look for a match. If there is such a match, bytes 12 and 13 are returned as p_uuid->uuid and the index
+ * relative to @ref BLE_UUID_TYPE_VENDOR_BEGIN as p_uuid->type.
+ *
+ * @note If the UUID length supplied is 2, then the type set by this call will always be @ref BLE_UUID_TYPE_BLE.
+ *
+ * @param[in] uuid_le_len Length in bytes of the buffer pointed to by p_uuid_le (must be 2 or 16 bytes).
+ * @param[in] p_uuid_le Pointer pointing to little endian raw UUID bytes.
+ * @param[in,out] p_uuid Pointer to a @ref ble_uuid_t structure to be filled in.
+ *
+ * @return @ref NRF_SUCCESS Successfully decoded into the @ref ble_uuid_t structure.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_LENGTH Invalid UUID length.
+ * @return @ref NRF_ERROR_NOT_FOUND For a 128-bit UUID, no match in the populated table of UUIDs.
+ */
+SVCALL(SD_BLE_UUID_DECODE, uint32_t, sd_ble_uuid_decode(uint8_t uuid_le_len, uint8_t const * const p_uuid_le, ble_uuid_t * const p_uuid));
+
+
+/** @brief Encode a @ref ble_uuid_t structure into little endian raw UUID bytes (16-bit or 128-bit).
+ *
+ * @note The pointer to the destination buffer p_uuid_le may be NULL, in which case only the validitiy and size of p_uuid is computed.
+ *
+ * @param[in] p_uuid Pointer to a @ref ble_uuid_t structure that will be encoded into bytes.
+ * @param[out] p_uuid_le_len Pointer to a uint8_t that will be filled with the encoded length (2 or 16 bytes).
+ * @param[out] p_uuid_le Pointer to a buffer where the little endian raw UUID bytes (2 or 16) will be stored.
+ *
+ * @return @ref NRF_SUCCESS Successfully encoded into the buffer.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid UUID type.
+ */
+SVCALL(SD_BLE_UUID_ENCODE, uint32_t, sd_ble_uuid_encode(ble_uuid_t const * const p_uuid, uint8_t * const p_uuid_le_len, uint8_t * const p_uuid_le));
+
+
+/**@brief Get Version Information.
+ *
+ * @details This call allows the application to get the BLE stack version information.
+ *
+ * @param[in] p_version Pointer to ble_version_t structure to be filled in.
+ *
+ * @return @ref NRF_SUCCESS Version information stored successfully.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_BUSY The stack is busy (typically doing a locally-initiated disconnection procedure).
+ */
+SVCALL(SD_BLE_VERSION_GET, uint32_t, sd_ble_version_get(ble_version_t * p_version));
+
+
+/**@brief Provide a user memory block.
+ *
+ * @note This call can only be used as a response to a @ref BLE_EVT_USER_MEM_REQUEST event issued to the application.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] p_block Pointer to a user memory block structure.
+ *
+ * @return @ref NRF_SUCCESS Successfully queued a response to the peer.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_STATE No execute write request pending.
+ */
+SVCALL(SD_BLE_USER_MEM_REPLY, uint32_t, sd_ble_user_mem_reply(uint16_t conn_handle, ble_user_mem_block_t *p_block));
+
+
+/**@brief Set a BLE option.
+ *
+ * @details This call allows the application to set the value of an option.
+ *
+ * @param[in] opt_id Option ID.
+ * @param[in] p_opt Pointer to a ble_opt_t structure containing the option value.
+ *
+ * @retval ::NRF_SUCCESS Option set successfully.
+ * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check parameter limits and constraints.
+ * @retval ::NRF_ERROR_INVALID_STATE Unable to set the parameter at this time.
+ * @retval ::NRF_ERROR_BUSY The stack is busy or the previous procedure has not completed.
+ */
+SVCALL(SD_BLE_OPT_SET, uint32_t, sd_ble_opt_set(uint32_t opt_id, ble_opt_t const *p_opt));
+
+
+/**@brief Get a BLE option.
+ *
+ * @details This call allows the application to retrieve the value of an option.
+ *
+ * @param[in] opt_id Option ID.
+ * @param[out] p_opt Pointer to a ble_opt_t structure to be filled in.
+ *
+ * @retval ::NRF_SUCCESS Option retrieved successfully.
+ * @retval ::NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @retval ::NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check parameter limits and constraints.
+ * @retval ::NRF_ERROR_INVALID_STATE Unable to retrieve the parameter at this time.
+ * @retval ::NRF_ERROR_BUSY The stack is busy or the previous procedure has not completed.
+ * @retval ::NRF_ERROR_NOT_SUPPORTED This option is not supported.
+ *
+ */
+SVCALL(SD_BLE_OPT_GET, uint32_t, sd_ble_opt_get(uint32_t opt_id, ble_opt_t *p_opt));
+
+/** @} */
+
+#endif /* BLE_H__ */
+
+/**
+ @}
+ @}
+*/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/s110_nrf51822_7_1_0/s110_nrf51822_7.1.0_API/include/ble_err.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,54 @@
+/*
+ * Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+ /**
+ @addtogroup BLE_COMMON
+ @{
+ @addtogroup nrf_error
+ @{
+ @ingroup BLE_COMMON
+ @}
+
+ @defgroup ble_err General error codes
+ @{
+
+ @brief General error code definitions for the BLE API.
+
+ @ingroup BLE_COMMON
+*/
+#ifndef NRF_BLE_ERR_H__
+#define NRF_BLE_ERR_H__
+
+#include "nrf_error.h"
+
+/* @defgroup BLE_ERRORS Error Codes
+ * @{ */
+#define BLE_ERROR_NOT_ENABLED (NRF_ERROR_STK_BASE_NUM+0x001) /**< @ref sd_ble_enable has not been called. */
+#define BLE_ERROR_INVALID_CONN_HANDLE (NRF_ERROR_STK_BASE_NUM+0x002) /**< Invalid connection handle. */
+#define BLE_ERROR_INVALID_ATTR_HANDLE (NRF_ERROR_STK_BASE_NUM+0x003) /**< Invalid attribute handle. */
+#define BLE_ERROR_NO_TX_BUFFERS (NRF_ERROR_STK_BASE_NUM+0x004) /**< Buffer capacity exceeded. */
+/** @} */
+
+
+/** @defgroup BLE_ERROR_SUBRANGES Module specific error code subranges
+ * @brief Assignment of subranges for module specific error codes.
+ * @note For specific error codes, see ble_<module>.h or ble_error_<module>.h.
+ * @{ */
+#define NRF_L2CAP_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x100) /**< L2CAP specific errors. */
+#define NRF_GAP_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x200) /**< GAP specific errors. */
+#define NRF_GATTC_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x300) /**< GATT client specific errors. */
+#define NRF_GATTS_ERR_BASE (NRF_ERROR_STK_BASE_NUM+0x400) /**< GATT server specific errors. */
+/** @} */
+
+#endif
+
+
+/**
+ @}
+ @}
+*/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/s110_nrf51822_7_1_0/s110_nrf51822_7.1.0_API/include/ble_gap.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1035 @@
+/* Copyright (c) 2011 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+/**
+ @addtogroup BLE_GAP Generic Access Profile (GAP)
+ @{
+ @brief Definitions and prototypes for the GAP interface.
+ */
+
+#ifndef BLE_GAP_H__
+#define BLE_GAP_H__
+
+#include "ble_types.h"
+#include "ble_ranges.h"
+#include "nrf_svc.h"
+
+
+/**@addtogroup BLE_GAP_ENUMERATIONS Enumerations
+ * @{ */
+
+/**@brief GAP API SVC numbers.
+ */
+enum BLE_GAP_SVCS
+{
+ SD_BLE_GAP_ADDRESS_SET = BLE_GAP_SVC_BASE, /**< Set own Bluetooth Address. */
+ SD_BLE_GAP_ADDRESS_GET, /**< Get own Bluetooth Address. */
+ SD_BLE_GAP_ADV_DATA_SET, /**< Set Advertisement Data. */
+ SD_BLE_GAP_ADV_START, /**< Start Advertising. */
+ SD_BLE_GAP_ADV_STOP, /**< Stop Advertising. */
+ SD_BLE_GAP_CONN_PARAM_UPDATE, /**< Connection Parameter Update. */
+ SD_BLE_GAP_DISCONNECT, /**< Disconnect. */
+ SD_BLE_GAP_TX_POWER_SET, /**< Set TX Power. */
+ SD_BLE_GAP_APPEARANCE_SET, /**< Set Appearance. */
+ SD_BLE_GAP_APPEARANCE_GET, /**< Get Appearance. */
+ SD_BLE_GAP_PPCP_SET, /**< Set PPCP. */
+ SD_BLE_GAP_PPCP_GET, /**< Get PPCP. */
+ SD_BLE_GAP_DEVICE_NAME_SET, /**< Set Device Name. */
+ SD_BLE_GAP_DEVICE_NAME_GET, /**< Get Device Name. */
+ SD_BLE_GAP_AUTHENTICATE, /**< Initiate Pairing/Bonding. */
+ SD_BLE_GAP_SEC_PARAMS_REPLY, /**< Reply with Security Parameters. */
+ SD_BLE_GAP_AUTH_KEY_REPLY, /**< Reply with an authentication key. */
+ SD_BLE_GAP_SEC_INFO_REPLY, /**< Reply with Security Information. */
+ SD_BLE_GAP_CONN_SEC_GET, /**< Obtain connection security level. */
+ SD_BLE_GAP_RSSI_START, /**< Start reporting of changes in RSSI. */
+ SD_BLE_GAP_RSSI_STOP, /**< Stop reporting of changes in RSSI. */
+};
+/**@} */
+
+/**@addtogroup BLE_GAP_DEFINES Defines
+ * @{ */
+
+/**@defgroup BLE_ERRORS_GAP SVC return values specific to GAP
+ * @{ */
+#define BLE_ERROR_GAP_UUID_LIST_MISMATCH (NRF_GAP_ERR_BASE + 0x000) /**< UUID list does not contain an integral number of UUIDs. */
+#define BLE_ERROR_GAP_DISCOVERABLE_WITH_WHITELIST (NRF_GAP_ERR_BASE + 0x001) /**< Use of Whitelist not permitted with discoverable advertising. */
+#define BLE_ERROR_GAP_INVALID_BLE_ADDR (NRF_GAP_ERR_BASE + 0x002) /**< The upper two bits of the address do not correspond to the specified address type. */
+/**@} */
+
+
+/**@defgroup BLE_GAP_ROLES GAP Roles
+ * @note Not explicitly used in peripheral API, but will be relevant for central API.
+ * @{ */
+#define BLE_GAP_ROLE_INVALID 0x0 /**< Invalid Role. */
+#define BLE_GAP_ROLE_PERIPH 0x1 /**< Peripheral Role. */
+#define BLE_GAP_ROLE_CENTRAL 0x2 /**< Central Role. */
+/**@} */
+
+
+/**@defgroup BLE_GAP_TIMEOUT_SOURCES GAP Timeout sources
+ * @{ */
+#define BLE_GAP_TIMEOUT_SRC_ADVERTISEMENT 0x00 /**< Advertisement timeout. */
+#define BLE_GAP_TIMEOUT_SRC_SECURITY_REQUEST 0x01 /**< Security request timeout. */
+/**@} */
+
+
+/**@defgroup BLE_GAP_ADDR_TYPES GAP Address types
+ * @{ */
+#define BLE_GAP_ADDR_TYPE_PUBLIC 0x00 /**< Public address. */
+#define BLE_GAP_ADDR_TYPE_RANDOM_STATIC 0x01 /**< Random Static address. */
+#define BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE 0x02 /**< Private Resolvable address. */
+#define BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE 0x03 /**< Private Non-Resolvable address. */
+/**@} */
+
+/**@defgroup BLE_GAP_ADDR_CYCLE_MODES GAP Address cycle modes
+ * @{ */
+#define BLE_GAP_ADDR_CYCLE_MODE_NONE 0x00 /**< Set addresses directly, no automatic address cycling. */
+#define BLE_GAP_ADDR_CYCLE_MODE_AUTO 0x01 /**< Automatically generate and update private addresses. */
+/** @} */
+
+/**@brief The default interval in seconds at which a private address is refreshed when address cycle mode is @ref BLE_GAP_ADDR_CYCLE_MODE_AUTO. */
+#define BLE_GAP_DEFAULT_PRIVATE_ADDR_CYCLE_INTERVAL_S (60 * 15)
+
+/** @brief BLE address length. */
+#define BLE_GAP_ADDR_LEN 6
+
+
+/**@defgroup BLE_GAP_AD_TYPE_DEFINITIONS GAP Advertising and Scan Response Data format
+ * @note Found at https://www.bluetooth.org/Technical/AssignedNumbers/generic_access_profile.htm
+ * @{ */
+#define BLE_GAP_AD_TYPE_FLAGS 0x01 /**< Flags for discoverability. */
+#define BLE_GAP_AD_TYPE_16BIT_SERVICE_UUID_MORE_AVAILABLE 0x02 /**< Partial list of 16 bit service UUIDs. */
+#define BLE_GAP_AD_TYPE_16BIT_SERVICE_UUID_COMPLETE 0x03 /**< Complete list of 16 bit service UUIDs. */
+#define BLE_GAP_AD_TYPE_32BIT_SERVICE_UUID_MORE_AVAILABLE 0x04 /**< Partial list of 32 bit service UUIDs. */
+#define BLE_GAP_AD_TYPE_32BIT_SERVICE_UUID_COMPLETE 0x05 /**< Complete list of 32 bit service UUIDs. */
+#define BLE_GAP_AD_TYPE_128BIT_SERVICE_UUID_MORE_AVAILABLE 0x06 /**< Partial list of 128 bit service UUIDs. */
+#define BLE_GAP_AD_TYPE_128BIT_SERVICE_UUID_COMPLETE 0x07 /**< Complete list of 128 bit service UUIDs. */
+#define BLE_GAP_AD_TYPE_SHORT_LOCAL_NAME 0x08 /**< Short local device name. */
+#define BLE_GAP_AD_TYPE_COMPLETE_LOCAL_NAME 0x09 /**< Complete local device name. */
+#define BLE_GAP_AD_TYPE_TX_POWER_LEVEL 0x0A /**< Transmit power level. */
+#define BLE_GAP_AD_TYPE_CLASS_OF_DEVICE 0x0D /**< Class of device. */
+#define BLE_GAP_AD_TYPE_SIMPLE_PAIRING_HASH_C 0x0E /**< Simple Pairing Hash C. */
+#define BLE_GAP_AD_TYPE_SIMPLE_PAIRING_RANDOMIZER_R 0x0F /**< Simple Pairing Randomizer R. */
+#define BLE_GAP_AD_TYPE_SECURITY_MANAGER_TK_VALUE 0x10 /**< Security Manager TK Value. */
+#define BLE_GAP_AD_TYPE_SECURITY_MANAGER_OOB_FLAGS 0x11 /**< Security Manager Out Of Band Flags. */
+#define BLE_GAP_AD_TYPE_SLAVE_CONNECTION_INTERVAL_RANGE 0x12 /**< Slave Connection Interval Range. */
+#define BLE_GAP_AD_TYPE_SOLICITED_SERVICE_UUIDS_16BIT 0x14 /**< List of 16-bit Service Solicitation UUIDs. */
+#define BLE_GAP_AD_TYPE_SOLICITED_SERVICE_UUIDS_128BIT 0x15 /**< List of 128-bit Service Solicitation UUIDs. */
+#define BLE_GAP_AD_TYPE_SERVICE_DATA 0x16 /**< Service Data - 16-bit UUID. */
+#define BLE_GAP_AD_TYPE_PUBLIC_TARGET_ADDRESS 0x17 /**< Public Target Address. */
+#define BLE_GAP_AD_TYPE_RANDOM_TARGET_ADDRESS 0x18 /**< Random Target Address. */
+#define BLE_GAP_AD_TYPE_APPEARANCE 0x19 /**< Appearance. */
+#define BLE_GAP_AD_TYPE_ADVERTISING_INTERVAL 0x1A /**< Advertising Interval. */
+#define BLE_GAP_AD_TYPE_LE_BLUETOOTH_DEVICE_ADDRESS 0x1B /**< LE Bluetooth Device Address. */
+#define BLE_GAP_AD_TYPE_LE_ROLE 0x1C /**< LE Role. */
+#define BLE_GAP_AD_TYPE_SIMPLE_PAIRING_HASH_C256 0x1D /**< Simple Pairing Hash C-256. */
+#define BLE_GAP_AD_TYPE_SIMPLE_PAIRING_RANDOMIZER_R256 0x1E /**< Simple Pairing Randomizer R-256. */
+#define BLE_GAP_AD_TYPE_SERVICE_DATA_32BIT_UUID 0x20 /**< Service Data - 32-bit UUID. */
+#define BLE_GAP_AD_TYPE_SERVICE_DATA_128BIT_UUID 0x21 /**< Service Data - 128-bit UUID. */
+#define BLE_GAP_AD_TYPE_3D_INFORMATION_DATA 0x3D /**< 3D Information Data. */
+#define BLE_GAP_AD_TYPE_MANUFACTURER_SPECIFIC_DATA 0xFF /**< Manufacturer Specific Data. */
+/**@} */
+
+
+/**@defgroup BLE_GAP_ADV_FLAGS GAP Advertisement Flags
+ * @{ */
+#define BLE_GAP_ADV_FLAG_LE_LIMITED_DISC_MODE (0x01) /**< LE Limited Discoverable Mode. */
+#define BLE_GAP_ADV_FLAG_LE_GENERAL_DISC_MODE (0x02) /**< LE General Discoverable Mode. */
+#define BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED (0x04) /**< BR/EDR not supported. */
+#define BLE_GAP_ADV_FLAG_LE_BR_EDR_CONTROLLER (0x08) /**< Simultaneous LE and BR/EDR, Controller. */
+#define BLE_GAP_ADV_FLAG_LE_BR_EDR_HOST (0x10) /**< Simultaneous LE and BR/EDR, Host. */
+#define BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE (BLE_GAP_ADV_FLAG_LE_LIMITED_DISC_MODE | BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED) /**< LE Limited Discoverable Mode, BR/EDR not supported. */
+#define BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE (BLE_GAP_ADV_FLAG_LE_GENERAL_DISC_MODE | BLE_GAP_ADV_FLAG_BR_EDR_NOT_SUPPORTED) /**< LE General Discoverable Mode, BR/EDR not supported. */
+/**@} */
+
+
+/**@defgroup BLE_GAP_ADV_INTERVALS GAP Advertising interval max and min
+ * @{ */
+#define BLE_GAP_ADV_INTERVAL_MIN 0x0020 /**< Minimum Advertising interval in 625 us units, i.e. 20 ms. */
+#define BLE_GAP_ADV_NONCON_INTERVAL_MIN 0x00A0 /**< Minimum Advertising interval in 625 us units for non connectable mode, i.e. 100 ms. */
+#define BLE_GAP_ADV_INTERVAL_MAX 0x4000 /**< Maximum Advertising interval in 625 us units, i.e. 10.24 s. */
+ /**@} */
+
+
+/**@brief Maximum size of advertising data in octets. */
+#define BLE_GAP_ADV_MAX_SIZE 31
+
+
+/**@defgroup BLE_GAP_ADV_TYPES GAP Advertising types
+ * @{ */
+#define BLE_GAP_ADV_TYPE_ADV_IND 0x00 /**< Connectable undirected. */
+#define BLE_GAP_ADV_TYPE_ADV_DIRECT_IND 0x01 /**< Connectable directed. */
+#define BLE_GAP_ADV_TYPE_ADV_SCAN_IND 0x02 /**< Scannable undirected. */
+#define BLE_GAP_ADV_TYPE_ADV_NONCONN_IND 0x03 /**< Non connectable undirected. */
+/**@} */
+
+
+/**@defgroup BLE_GAP_ADV_FILTER_POLICIES GAP Advertising filter policies
+ * @{ */
+#define BLE_GAP_ADV_FP_ANY 0x00 /**< Allow scan requests and connect requests from any device. */
+#define BLE_GAP_ADV_FP_FILTER_SCANREQ 0x01 /**< Filter scan requests with whitelist. */
+#define BLE_GAP_ADV_FP_FILTER_CONNREQ 0x02 /**< Filter connect requests with whitelist. */
+#define BLE_GAP_ADV_FP_FILTER_BOTH 0x03 /**< Filter both scan and connect requests with whitelist. */
+/**@} */
+
+
+/**@defgroup BLE_GAP_ADV_TIMEOUT_VALUES GAP Advertising timeout values
+ * @{ */
+#define BLE_GAP_ADV_TIMEOUT_LIMITED_MAX 180 /**< Maximum advertising time in limited discoverable mode (TGAP(lim_adv_timeout) = 180s in spec (Addendum 2)). */
+#define BLE_GAP_ADV_TIMEOUT_GENERAL_UNLIMITED 0 /**< Unlimited advertising in general discoverable mode. */
+/**@} */
+
+
+/**@defgroup BLE_GAP_DISC_MODES GAP Discovery modes
+ * @{ */
+#define BLE_GAP_DISC_MODE_NOT_DISCOVERABLE 0x00 /**< Not discoverable discovery Mode. */
+#define BLE_GAP_DISC_MODE_LIMITED 0x01 /**< Limited Discovery Mode. */
+#define BLE_GAP_DISC_MODE_GENERAL 0x02 /**< General Discovery Mode. */
+/**@} */
+
+/**@defgroup BLE_GAP_IO_CAPS GAP IO Capabilities
+ * @{ */
+#define BLE_GAP_IO_CAPS_DISPLAY_ONLY 0x00 /**< Display Only. */
+#define BLE_GAP_IO_CAPS_DISPLAY_YESNO 0x01 /**< Display and Yes/No entry. */
+#define BLE_GAP_IO_CAPS_KEYBOARD_ONLY 0x02 /**< Keyboard Only. */
+#define BLE_GAP_IO_CAPS_NONE 0x03 /**< No I/O capabilities. */
+#define BLE_GAP_IO_CAPS_KEYBOARD_DISPLAY 0x04 /**< Keyboard and Display. */
+/**@} */
+
+
+/**@defgroup BLE_GAP_AUTH_KEY_TYPES GAP Authentication Key Types
+ * @{ */
+#define BLE_GAP_AUTH_KEY_TYPE_NONE 0x00 /**< No key (may be used to reject). */
+#define BLE_GAP_AUTH_KEY_TYPE_PASSKEY 0x01 /**< 6-digit Passkey. */
+#define BLE_GAP_AUTH_KEY_TYPE_OOB 0x02 /**< Out Of Band data. */
+/**@} */
+
+/**@defgroup BLE_GAP_SEC_STATUS GAP Security status
+ * @{ */
+#define BLE_GAP_SEC_STATUS_SUCCESS 0x00 /**< Successful parameters. */
+#define BLE_GAP_SEC_STATUS_TIMEOUT 0x01 /**< Procedure timed out. */
+#define BLE_GAP_SEC_STATUS_PDU_INVALID 0x02 /**< Invalid PDU received. */
+#define BLE_GAP_SEC_STATUS_PASSKEY_ENTRY_FAILED 0x81 /**< Passkey entry failed (user cancelled or other). */
+#define BLE_GAP_SEC_STATUS_OOB_NOT_AVAILABLE 0x82 /**< Out of Band Key not available. */
+#define BLE_GAP_SEC_STATUS_AUTH_REQ 0x83 /**< Authentication requirements not met. */
+#define BLE_GAP_SEC_STATUS_CONFIRM_VALUE 0x84 /**< Confirm value failed. */
+#define BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP 0x85 /**< Pairing not supported. */
+#define BLE_GAP_SEC_STATUS_ENC_KEY_SIZE 0x86 /**< Encryption key size. */
+#define BLE_GAP_SEC_STATUS_SMP_CMD_UNSUPPORTED 0x87 /**< Unsupported SMP command. */
+#define BLE_GAP_SEC_STATUS_UNSPECIFIED 0x88 /**< Unspecified reason. */
+#define BLE_GAP_SEC_STATUS_REPEATED_ATTEMPTS 0x89 /**< Too little time elapsed since last attempt. */
+#define BLE_GAP_SEC_STATUS_INVALID_PARAMS 0x8A /**< Invalid parameters. */
+/**@} */
+
+/**@defgroup BLE_GAP_SEC_STATUS_SOURCES GAP Security status sources
+ * @{ */
+#define BLE_GAP_SEC_STATUS_SOURCE_LOCAL 0x00 /**< Local failure. */
+#define BLE_GAP_SEC_STATUS_SOURCE_REMOTE 0x01 /**< Remote failure. */
+/**@} */
+
+/**@defgroup BLE_GAP_CP_LIMITS GAP Connection Parameters Limits
+ * @{ */
+#define BLE_GAP_CP_MIN_CONN_INTVL_NONE 0xFFFF /**< No new minimum connction interval specified in connect parameters. */
+#define BLE_GAP_CP_MIN_CONN_INTVL_MIN 0x0006 /**< Lowest mimimum connection interval permitted, in units of 1.25 ms, i.e. 7.5 ms. */
+#define BLE_GAP_CP_MIN_CONN_INTVL_MAX 0x0C80 /**< Highest minimum connection interval permitted, in units of 1.25 ms, i.e. 4 s. */
+#define BLE_GAP_CP_MAX_CONN_INTVL_NONE 0xFFFF /**< No new maximum connction interval specified in connect parameters. */
+#define BLE_GAP_CP_MAX_CONN_INTVL_MIN 0x0006 /**< Lowest maximum connection interval permitted, in units of 1.25 ms, i.e. 7.5 ms. */
+#define BLE_GAP_CP_MAX_CONN_INTVL_MAX 0x0C80 /**< Highest maximum connection interval permitted, in units of 1.25 ms, i.e. 4 s. */
+#define BLE_GAP_CP_SLAVE_LATENCY_MAX 0x03E8 /**< Highest slave latency permitted, in connection events. */
+#define BLE_GAP_CP_CONN_SUP_TIMEOUT_NONE 0xFFFF /**< No new supervision timeout specified in connect parameters. */
+#define BLE_GAP_CP_CONN_SUP_TIMEOUT_MIN 0x000A /**< Lowest supervision timeout permitted, in units of 10 ms, i.e. 100 ms. */
+#define BLE_GAP_CP_CONN_SUP_TIMEOUT_MAX 0x0C80 /**< Highest supervision timeout permitted, in units of 10 ms, i.e. 32 s. */
+/**@} */
+
+
+/**@brief GAP device name maximum length. */
+#define BLE_GAP_DEVNAME_MAX_LEN 31
+
+
+/**@defgroup BLE_GAP_CONN_SEC_MODE_SET_MACROS GAP attribute security requirement setters
+ *
+ * See @ref ble_gap_conn_sec_mode_t.
+ * @{ */
+/**@brief Set sec_mode pointed to by ptr to have no access rights.*/
+#define BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(ptr) do {(ptr)->sm = 0; (ptr)->lv = 0;} while(0)
+/**@brief Set sec_mode pointed to by ptr to require no protection, open link.*/
+#define BLE_GAP_CONN_SEC_MODE_SET_OPEN(ptr) do {(ptr)->sm = 1; (ptr)->lv = 1;} while(0)
+/**@brief Set sec_mode pointed to by ptr to require encryption, but no MITM protection.*/
+#define BLE_GAP_CONN_SEC_MODE_SET_ENC_NO_MITM(ptr) do {(ptr)->sm = 1; (ptr)->lv = 2;} while(0)
+/**@brief Set sec_mode pointed to by ptr to require encryption and MITM protection.*/
+#define BLE_GAP_CONN_SEC_MODE_SET_ENC_WITH_MITM(ptr) do {(ptr)->sm = 1; (ptr)->lv = 3;} while(0)
+/**@brief Set sec_mode pointed to by ptr to require signing or encryption, no MITM protection needed.*/
+#define BLE_GAP_CONN_SEC_MODE_SET_SIGNED_NO_MITM(ptr) do {(ptr)->sm = 2; (ptr)->lv = 1;} while(0)
+/**@brief Set sec_mode pointed to by ptr to require signing or encryption with MITM protection.*/
+#define BLE_GAP_CONN_SEC_MODE_SET_SIGNED_WITH_MITM(ptr) do {(ptr)->sm = 2; (ptr)->lv = 2;} while(0)
+/**@} */
+
+
+/**@brief GAP Security Key Length. */
+#define BLE_GAP_SEC_KEY_LEN 16
+
+/**@brief GAP Passkey Length. */
+#define BLE_GAP_PASSKEY_LEN 6
+
+/**@brief Maximum amount of addresses in a whitelist. */
+#define BLE_GAP_WHITELIST_ADDR_MAX_COUNT (8)
+
+/**@brief Maximum amount of IRKs in a whitelist.
+ * @note The number of IRKs is limited to 8, even if the hardware supports more.
+ */
+#define BLE_GAP_WHITELIST_IRK_MAX_COUNT (8)
+
+/**@defgroup GAP_SEC_MODES GAP Security Modes
+ * @{ */
+#define BLE_GAP_SEC_MODE 0x00 /**< No key (may be used to reject). */
+/**@} */
+
+/**@} */
+
+/**@addtogroup BLE_GAP_STRUCTURES Structures
+ * @{ */
+
+/**@brief Bluetooth Low Energy address. */
+typedef struct
+{
+ uint8_t addr_type; /**< See @ref BLE_GAP_ADDR_TYPES. */
+ uint8_t addr[BLE_GAP_ADDR_LEN]; /**< 48-bit address, LSB format. */
+} ble_gap_addr_t;
+
+
+/**@brief GAP connection parameters.
+ *
+ * @note When ble_conn_params_t is received in an event, both min_conn_interval and
+ * max_conn_interval will be equal to the connection interval set by the central.
+ */
+typedef struct
+{
+ uint16_t min_conn_interval; /**< Minimum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
+ uint16_t max_conn_interval; /**< Maximum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
+ uint16_t slave_latency; /**< Slave Latency in number of connection events, see @ref BLE_GAP_CP_LIMITS.*/
+ uint16_t conn_sup_timeout; /**< Connection Supervision Timeout in 10 ms units, see @ref BLE_GAP_CP_LIMITS.*/
+} ble_gap_conn_params_t;
+
+
+/**@brief GAP link requirements.
+ *
+ * See Bluetooth Core specification, Volume 3 Part C 10.2 for details.
+ *
+ * Security Mode 0 Level 0: No access permissions at all (this level is not defined by the Bluetooth Core specification).\n
+ * Security Mode 1 Level 1: No security is needed (aka open link).\n
+ * Security Mode 1 Level 2: Encrypted link required, MITM protection not necessary.\n
+ * Security Mode 1 Level 3: MITM protected encrypted link required.\n
+ * Security Mode 2 Level 1: Signing or encryption required, MITM protection not necessary.\n
+ * Security Mode 2 Level 2: MITM protected signing required, unless link is MITM protected encrypted.\n
+ */
+typedef struct
+{
+ uint8_t sm : 4; /**< Security Mode (1 or 2), 0 for no permissions at all. */
+ uint8_t lv : 4; /**< Level (1, 2 or 3), 0 for no permissions at all. */
+
+} ble_gap_conn_sec_mode_t;
+
+
+/**@brief GAP connection security status.*/
+typedef struct
+{
+ ble_gap_conn_sec_mode_t sec_mode; /**< Currently active security mode for this connection.*/
+ uint8_t encr_key_size; /**< Length of currently active encryption key, 7 to 16 octets (only applicable for bonding procedures). */
+} ble_gap_conn_sec_t;
+
+
+/**@brief Identity Resolving Key. */
+typedef struct
+{
+ uint8_t irk[BLE_GAP_SEC_KEY_LEN]; /**< Array containing IRK. */
+} ble_gap_irk_t;
+
+
+/**@brief Whitelist structure. */
+typedef struct
+{
+ ble_gap_addr_t ** pp_addrs; /**< Pointer to array of device address pointers, pointing to addresses to be used in whitelist. NULL if none are given. */
+ uint8_t addr_count; /**< Count of device addresses in array, up to @ref BLE_GAP_WHITELIST_ADDR_MAX_COUNT. */
+ ble_gap_irk_t ** pp_irks; /**< Pointer to array of Identity Resolving Key (IRK) pointers, each pointing to an IRK in the whitelist. NULL if none are given. */
+ uint8_t irk_count; /**< Count of IRKs in array, up to @ref BLE_GAP_WHITELIST_IRK_MAX_COUNT. */
+} ble_gap_whitelist_t;
+
+
+/**@brief GAP advertising parameters.*/
+typedef struct
+{
+ uint8_t type; /**< See @ref BLE_GAP_ADV_TYPES. */
+ ble_gap_addr_t* p_peer_addr; /**< For BLE_GAP_CONN_MODE_DIRECTED mode only, known peer address. */
+ uint8_t fp; /**< Filter Policy, see @ref BLE_GAP_ADV_FILTER_POLICIES. */
+ ble_gap_whitelist_t * p_whitelist; /**< Pointer to whitelist, NULL if none is given. */
+ uint16_t interval; /**< Advertising interval between 0x0020 and 0x4000 in 0.625 ms units (20ms to 10.24s), see @ref BLE_GAP_ADV_INTERVALS.
+ - If type equals @ref BLE_GAP_ADV_TYPE_ADV_DIRECT_IND, this parameter must be set to 0 for high duty cycle directed advertising.
+ - If type equals @ref BLE_GAP_ADV_TYPE_ADV_DIRECT_IND, set @ref BLE_GAP_ADV_INTERVAL_MIN <= interval <= @ref BLE_GAP_ADV_INTERVAL_MAX for low duty cycle advertising */
+ uint16_t timeout; /**< Advertising timeout between 0x0001 and 0x3FFF in seconds, 0x0000 disables timeout. See also @ref BLE_GAP_ADV_TIMEOUT_VALUES. If type equals @ref BLE_GAP_ADV_TYPE_ADV_DIRECT_IND, this parameter must be set to 0 for High duty cycle directed advertising. */
+} ble_gap_adv_params_t;
+
+
+/**@brief GAP scanning parameters. */
+typedef struct
+{
+ uint8_t filter; /**< Filter based on discovery mode, see @ref BLE_GAP_DISC_MODES. */
+ uint8_t active : 1; /**< If 1, perform active scanning (scan requests). */
+ uint8_t selective : 1; /**< If 1, ignore unknown devices (non whitelisted). */
+ uint16_t interval; /**< Scan interval between 0x0020 and 0x4000 in 0.625ms units (20ms to 10.24s). */
+ uint16_t window; /**< Scan window between 0x0004 and 0x4000 in 0.625ms units (2.5ms to 10.24s). */
+ uint16_t timeout; /**< Scan timeout between 0x0001 and 0x3FFF in seconds, 0x0000 disables timeout. */
+} ble_gap_scan_params_t;
+
+
+/**@brief GAP security parameters. */
+typedef struct
+{
+ uint16_t timeout; /**< Timeout for SMP transactions or Security Request in seconds, see @ref sd_ble_gap_authenticate and @ref sd_ble_gap_sec_params_reply for more information. */
+ uint8_t bond : 1; /**< Perform bonding. */
+ uint8_t mitm : 1; /**< Man In The Middle protection required. */
+ uint8_t io_caps : 3; /**< IO capabilities, see @ref BLE_GAP_IO_CAPS. */
+ uint8_t oob : 1; /**< Out Of Band data available. */
+ uint8_t min_key_size; /**< Minimum encryption key size in octets between 7 and 16. */
+ uint8_t max_key_size; /**< Maximum encryption key size in octets between min_key_size and 16. */
+} ble_gap_sec_params_t;
+
+
+/**@brief GAP Encryption Information. */
+typedef struct
+{
+ uint16_t div; /**< Encryption Diversifier. */
+ uint8_t ltk[BLE_GAP_SEC_KEY_LEN]; /**< Long Term Key. */
+ uint8_t auth : 1; /**< Authenticated Key. */
+ uint8_t ltk_len : 7; /**< LTK length in octets. */
+} ble_gap_enc_info_t;
+
+
+/**@brief GAP Master Identification. */
+typedef struct
+{
+ uint16_t ediv; /**< Encrypted Diversifier. */
+ uint8_t rand[8]; /**< Random Number. */
+} ble_gap_master_id_t;
+
+
+/**@brief GAP Identity Information. */
+typedef struct
+{
+ ble_gap_addr_t addr; /**< Bluetooth address to which this key applies. */
+ uint8_t irk[BLE_GAP_SEC_KEY_LEN]; /**< Identity Resolution Key. */
+} ble_gap_id_info_t;
+
+
+/**@brief GAP Signing Information. */
+typedef struct
+{
+ uint8_t csrk[BLE_GAP_SEC_KEY_LEN]; /* Connection Signature Resolving Key. */
+} ble_gap_sign_info_t;
+
+
+/**@brief GAP Event IDs.
+ * Those IDs uniquely identify an event coming from the stack to the application.
+ */
+enum BLE_GAP_EVTS
+{
+ BLE_GAP_EVT_CONNECTED = BLE_GAP_EVT_BASE, /**< Connection established. */
+ BLE_GAP_EVT_DISCONNECTED, /**< Disconnected from peer. */
+ BLE_GAP_EVT_CONN_PARAM_UPDATE, /**< Connection Parameters updated. */
+ BLE_GAP_EVT_SEC_PARAMS_REQUEST, /**< Request to provide security parameters. */
+ BLE_GAP_EVT_SEC_INFO_REQUEST, /**< Request to provide security information. */
+ BLE_GAP_EVT_PASSKEY_DISPLAY, /**< Request to display a passkey to the user. */
+ BLE_GAP_EVT_AUTH_KEY_REQUEST, /**< Request to provide an authentication key. */
+ BLE_GAP_EVT_AUTH_STATUS, /**< Authentication procedure completed with status. */
+ BLE_GAP_EVT_CONN_SEC_UPDATE, /**< Connection security updated. */
+ BLE_GAP_EVT_TIMEOUT, /**< Timeout expired. */
+ BLE_GAP_EVT_RSSI_CHANGED, /**< Signal strength measurement report. */
+};
+
+
+/**
+ * @brief GAP Option IDs.
+ * IDs that uniquely identify a GAP option.
+ */
+enum BLE_GAP_OPTS
+{
+ BLE_GAP_OPT_LOCAL_CONN_LATENCY = BLE_GAP_OPT_BASE, /**< Local connection latency. */
+ BLE_GAP_OPT_PASSKEY, /**< Set passkey to be used during pairing. This option can be used to make the SoftDevice use an application provided passkey instead of generating a random passkey.*/
+ BLE_GAP_OPT_PRIVACY, /**< Set or get custom IRK or custom private address cycle interval. */
+};
+/**@} */
+
+
+/**@brief Event data for connected event. */
+typedef struct
+{
+ ble_gap_addr_t peer_addr; /**< Bluetooth address of the peer device. */
+ uint8_t irk_match :1; /**< If 1, peer device's address resolved using an IRK. */
+ uint8_t irk_match_idx :7; /**< Index in IRK list where the address was matched. */
+ ble_gap_conn_params_t conn_params; /**< GAP Connection Parameters. */
+} ble_gap_evt_connected_t;
+
+
+/**@brief Event data for disconnected event. */
+typedef struct
+{
+ uint8_t reason; /**< HCI error code. */
+} ble_gap_evt_disconnected_t;
+
+
+/**@brief Event data for connection parameter update event. */
+typedef struct
+{
+ ble_gap_conn_params_t conn_params; /**< GAP Connection Parameters. */
+} ble_gap_evt_conn_param_update_t;
+
+
+/**@brief Event data for security parameters request event. */
+typedef struct
+{
+ ble_gap_sec_params_t peer_params; /**< Initiator Security Parameters. */
+} ble_gap_evt_sec_params_request_t;
+
+
+/**@brief Event data for security info request event. */
+typedef struct
+{
+ ble_gap_addr_t peer_addr; /**< Bluetooth address of the peer device. */
+ uint16_t div; /**< Encryption diversifier for LTK lookup. */
+ uint8_t enc_info : 1; /**< If 1, Encryption Information required. */
+ uint8_t id_info : 1; /**< If 1, Identity Information required. */
+ uint8_t sign_info : 1; /**< If 1, Signing Information required. */
+} ble_gap_evt_sec_info_request_t;
+
+
+/**@brief Event data for passkey display event. */
+typedef struct
+{
+ uint8_t passkey[BLE_GAP_PASSKEY_LEN]; /**< 6-digit passkey in ASCII ('0'-'9' digits only). */
+} ble_gap_evt_passkey_display_t;
+
+
+/**@brief Event data for authentication key request event. */
+typedef struct
+{
+ uint8_t key_type; /**< See @ref BLE_GAP_AUTH_KEY_TYPES. */
+} ble_gap_evt_auth_key_request_t;
+
+
+/**@brief Security levels supported.
+ * @note See Bluetooth Specification Version 4.1 Volume 3, Part C, Chapter 10.
+*/
+typedef struct
+{
+ uint8_t lv1 : 1; /**< If 1: Level 1 is supported. */
+ uint8_t lv2 : 1; /**< If 1: Level 2 is supported. */
+ uint8_t lv3 : 1; /**< If 1: Level 3 is supported. */
+} ble_gap_sec_levels_t;
+
+
+/**@brief Keys that have been exchanged. */
+typedef struct
+{
+ uint8_t ltk : 1; /**< Long Term Key. */
+ uint8_t ediv_rand : 1; /**< Encrypted Diversifier and Random value. */
+ uint8_t irk : 1; /**< Identity Resolving Key. */
+ uint8_t address : 1; /**< Public or static random address. */
+ uint8_t csrk : 1; /**< Connection Signature Resolving Key. */
+} ble_gap_sec_keys_t;
+
+
+/**@brief Event data for authentication status event. */
+typedef struct
+{
+ uint8_t auth_status; /**< Authentication status, see @ref BLE_GAP_SEC_STATUS. */
+ uint8_t error_src; /**< On error, source that caused the failure, see @ref BLE_GAP_SEC_STATUS_SOURCES. */
+ ble_gap_sec_levels_t sm1_levels; /**< Levels supported in Security Mode 1. */
+ ble_gap_sec_levels_t sm2_levels; /**< Levels supported in Security Mode 2. */
+ ble_gap_sec_keys_t periph_kex; /**< Bitmap stating which keys were exchanged (distributed) by the peripheral. */
+ ble_gap_sec_keys_t central_kex; /**< Bitmap stating which keys were exchanged (distributed) by the central. */
+ struct periph_keys_t
+ {
+ ble_gap_enc_info_t enc_info; /**< Peripheral's Encryption information. */
+ } periph_keys; /**< Actual keys distributed from the Peripheral to the Central. */
+ struct central_keys_t
+ {
+ ble_gap_irk_t irk; /**< Central's IRK. */
+ ble_gap_addr_t id_info; /**< Central's Identity Info. */
+ } central_keys; /**< Actual keys distributed from the Central to the Peripheral. */
+} ble_gap_evt_auth_status_t;
+
+
+/**@brief Event data for connection security update event. */
+typedef struct
+{
+ ble_gap_conn_sec_t conn_sec; /**< Connection security level. */
+} ble_gap_evt_conn_sec_update_t;
+
+
+/**@brief Event data for timeout event. */
+typedef struct
+{
+ uint8_t src; /**< Source of timeout event, see @ref BLE_GAP_TIMEOUT_SOURCES. */
+} ble_gap_evt_timeout_t;
+
+
+/**@brief Event data for advertisement report event. */
+typedef struct
+{
+ int8_t rssi; /**< Received Signal Strength Indication in dBm. */
+} ble_gap_evt_rssi_changed_t;
+
+
+/**@brief GAP event callback event structure. */
+typedef struct
+{
+ uint16_t conn_handle; /**< Connection Handle on which event occured. */
+ union /**< union alternative identified by evt_id in enclosing struct. */
+ {
+ ble_gap_evt_connected_t connected; /**< Connected Event Parameters. */
+ ble_gap_evt_disconnected_t disconnected; /**< Disconnected Event Parameters. */
+ ble_gap_evt_conn_param_update_t conn_param_update; /**< Connection Parameter Update Parameters. */
+ ble_gap_evt_sec_params_request_t sec_params_request; /**< Security Parameters Request Event Parameters. */
+ ble_gap_evt_sec_info_request_t sec_info_request; /**< Security Information Request Event Parameters. */
+ ble_gap_evt_passkey_display_t passkey_display; /**< Passkey Display Event Parameters. */
+ ble_gap_evt_auth_key_request_t auth_key_request; /**< Authentication Key Request Event Parameters. */
+ ble_gap_evt_auth_status_t auth_status; /**< Authentication Status Event Parameters. */
+ ble_gap_evt_conn_sec_update_t conn_sec_update; /**< Connection Security Update Event Parameters. */
+ ble_gap_evt_timeout_t timeout; /**< Timeout Event Parameters. */
+ ble_gap_evt_rssi_changed_t rssi_changed; /**< RSSI Event parameters. */
+ } params;
+
+} ble_gap_evt_t;
+
+
+/**@brief Local connection latency option.
+ *
+ * Local connection latency is a feature which enables the slave to improve
+ * current consumption by ignoring the slave latency set by the peer. The
+ * local connection latency can only be set to a multiple of the slave latency,
+ * and cannot be longer than half of the supervision timeout.
+ *
+ * Used with @ref sd_ble_opt_set to set the local connection latency. The
+ * @ref sd_ble_opt_get is not supported for this option, but the actual
+ * local connection latency (unless set to NULL) is set as a return parameter
+ * when setting the option.
+ *
+ * @note The latency set will be truncated down to the closest slave latency event
+ * multiple, or the nearest multiple before half of the supervision timeout.
+ *
+ * @note The local connection latency is default off, and needs to be set for new
+ * connections and whenever the connection is updated.
+ *
+ * @retval ::NRF_SUCCESS Set successfully.
+ * @retval ::NRF_ERROR_NOT_SUPPORTED Get is not supported.
+ * @retval ::BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle parameter.
+ */
+typedef struct
+{
+ uint16_t conn_handle; /**< Connection Handle */
+ uint16_t requested_latency; /**< Requested local connection latency. */
+ uint16_t * p_actual_latency; /**< Pointer to storage for the actual local connection latency (can be set to NULL to skip return value). */
+} ble_gap_opt_local_conn_latency_t;
+
+
+/**@brief Passkey Option.
+ *
+ * Structure containing the passkey to be used during pairing. This can be used with @ref
+ * sd_ble_opt_set to make the SoftDevice use a pre-programmed passkey for authentication
+ * instead of generating a random one.
+ *
+ * @note @ref sd_ble_opt_get is not supported for this option.
+ *
+ */
+typedef struct
+{
+ uint8_t * p_passkey; /**< Pointer to 6-digit ASCII string (digit 0..9 only, no NULL termination) passkey to be used during pairing. If this is NULL, the SoftDevice will generate a random passkey if required.*/
+} ble_gap_opt_passkey_t;
+
+
+/**@brief Custom Privacy Options.
+ *
+ * @note The specified address cycle interval is used when the address cycle mode is
+ * @ref BLE_GAP_ADDR_CYCLE_MODE_AUTO. If 0 is given, the address will not be refreshed at any
+ * interval, and not at start of advertising. A new address can be generated manually by calling
+ * @ref sd_ble_gap_address_set with the same type again. The default interval is
+ * @ref BLE_GAP_DEFAULT_PRIVATE_ADDR_CYCLE_INTERVAL_S.
+ *
+ * @note If cycle mode is @ref BLE_GAP_ADDR_CYCLE_MODE_AUTO, the address will immediately be
+ * refreshed when this option is set.
+ */
+typedef struct
+{
+ ble_gap_irk_t * p_irk; /**< When input: Pointer to custom IRK, or NULL to use/reset to the device's default IRK. When output: Pointer to where the current IRK is to be stored, or NULL to not read out the IRK. */
+ uint16_t interval_s; /**< When input: Custom private address cycle interval in seconds. When output: The current private address cycle interval. */
+} ble_gap_opt_privacy_t;
+
+
+/**@brief Option structure for GAP options. */
+typedef union
+{
+ ble_gap_opt_local_conn_latency_t local_conn_latency; /**< Local connection latency. */
+ ble_gap_opt_passkey_t passkey; /**< Passkey to be used for pairing.*/
+ ble_gap_opt_privacy_t privacy; /**< Custom privacy options. */
+} ble_gap_opt_t;
+/**@} */
+
+
+/**@addtogroup BLE_GAP_FUNCTIONS Functions
+ * @{ */
+
+/**@brief Set local Bluetooth address.
+ *
+ * If the address cycle mode is @ref BLE_GAP_ADDR_CYCLE_MODE_AUTO, the address type is required to
+ * be @ref BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE or
+ * @ref BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE. The given address is ignored and the
+ * SoftDevice will generate a new private address automatically every time advertising is
+ * (re)started, and every @ref BLE_GAP_DEFAULT_PRIVATE_ADDR_CYCLE_INTERVAL_S seconds. If this API
+ * call is used again with the same parameters while advertising, the SoftDevice will immediately
+ * generate a new private address to replace the current address.
+ *
+ * If the application wishes to use a @ref BLE_GAP_ADDR_TYPE_PUBLIC or
+ * @ref BLE_GAP_ADDR_TYPE_RANDOM_STATIC address, the cycle mode must be
+ * @ref BLE_GAP_ADDR_CYCLE_MODE_NONE.
+ *
+ * If this API function is called while advertising, the softdevice will immediately update the
+ * advertising address without the need to stop advertising in the following cases:
+ * - If the previously set address is of type @ref BLE_GAP_ADDR_TYPE_PUBLIC and the new address
+ * is also of type @ref BLE_GAP_ADDR_TYPE_PUBLIC
+ * - If the previously set address is not @ref BLE_GAP_ADDR_TYPE_PUBLIC and the new address is
+ * also not @ref BLE_GAP_ADDR_TYPE_PUBLIC.
+ *
+ * If the address is changed from a @ref BLE_GAP_ADDR_TYPE_PUBLIC address to another type or from
+ * another type to a @ref BLE_GAP_ADDR_TYPE_PUBLIC address, the change will take effect the next
+ * time advertising is started.
+ *
+ * @note If the address cycle mode is @ref BLE_GAP_ADDR_CYCLE_MODE_NONE and the application is
+ * using privacy, the application must take care to generate and set new private addresses
+ * periodically to comply with the Privacy specification in Bluetooth Core Spec.
+ *
+ * @param[in] addr_cycle_mode Address cycle mode, see @ref BLE_GAP_ADDR_CYCLE_MODES.
+ * @param[in] p_addr Pointer to address structure.
+ *
+ * @return @ref NRF_SUCCESS Address successfully set.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameters.
+ * @return @ref BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid address.
+ * @return @ref NRF_ERROR_BUSY The stack is busy, process pending events and retry.
+ */
+SVCALL(SD_BLE_GAP_ADDRESS_SET, uint32_t, sd_ble_gap_address_set(uint8_t addr_cycle_mode, ble_gap_addr_t const * const p_addr));
+
+
+/**@brief Get local Bluetooth address.
+ *
+ * @param[out] p_addr Pointer to address structure.
+ *
+ * @return @ref NRF_SUCCESS Address successfully retrieved.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ */
+SVCALL(SD_BLE_GAP_ADDRESS_GET, uint32_t, sd_ble_gap_address_get(ble_gap_addr_t * const p_addr));
+
+
+/**@brief Set, clear or update advertisement and scan response data.
+ *
+ * @note The format of the advertisement data will be checked by this call to ensure interoperability.
+ * Limitations imposed by this API call to the data provided include having a flags data type in the scan response data and
+ * duplicating the local name in the advertisement data and scan response data.
+ *
+ * @note: To clear the advertisement data and set it to a 0-length packet, simply provide a valid pointer (p_data/p_sr_data) with its corresponding
+ * length (dlen/srdlen) set to 0.
+ *
+ * @note: The call will fail if p_data and p_sr_data are both NULL since this would have no effect.
+ *
+ * @param[in] p_data Raw data to be placed in advertisement packet. If NULL, no changes are made to the current advertisement packet data.
+ * @param[in] dlen Data length for p_data. Max size: @ref BLE_GAP_ADV_MAX_SIZE octets. Should be 0 if p_data is NULL, can be 0 if p_data is not NULL.
+ * @param[in] p_sr_data Raw data to be placed in scan response packet. If NULL, no changes are made to the current scan response packet data.
+ * @param[in] srdlen Data length for p_sr_data. Max size: @ref BLE_GAP_ADV_MAX_SIZE octets. Should be 0 if p_sr_data is NULL, can be 0 if p_data is not NULL.
+ *
+ * @return @ref NRF_SUCCESS Advertisement data successfully updated or cleared.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_FLAGS Invalid combination of advertising flags supplied.
+ * @return @ref NRF_ERROR_INVALID_DATA Invalid data type(s) supplied, check the advertising data format specification.
+ * @return @ref NRF_ERROR_INVALID_LENGTH Invalid data length(s) supplied.
+ * @return @ref BLE_ERROR_GAP_UUID_LIST_MISMATCH Invalid UUID list supplied.
+ * @return @ref NRF_ERROR_BUSY The stack is busy, process pending events and retry.
+ */
+SVCALL(SD_BLE_GAP_ADV_DATA_SET, uint32_t, sd_ble_gap_adv_data_set(uint8_t const * const p_data, uint8_t dlen, uint8_t const * const p_sr_data, uint8_t srdlen));
+
+
+/**@brief Start advertising (GAP Discoverable, Connectable modes, Broadcast Procedure).
+ *
+ * @param[in] p_adv_params Pointer to advertising parameters structure.
+ *
+ * @return @ref NRF_SUCCESS The BLE stack has started advertising.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check the accepted ranges and limits.
+ * @return @ref BLE_ERROR_GAP_INVALID_BLE_ADDR Invalid Bluetooth address supplied.
+ * @return @ref BLE_ERROR_GAP_DISCOVERABLE_WITH_WHITELIST Discoverable mode and whitelist incompatible.
+ */
+SVCALL(SD_BLE_GAP_ADV_START, uint32_t, sd_ble_gap_adv_start(ble_gap_adv_params_t const * const p_adv_params));
+
+
+/**@brief Stop advertising (GAP Discoverable, Connectable modes, Broadcast Procedure).
+ *
+ * @return @ref NRF_SUCCESS The BLE stack has stopped advertising.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation (most probably not in advertising state).
+ */
+SVCALL(SD_BLE_GAP_ADV_STOP, uint32_t, sd_ble_gap_adv_stop(void));
+
+
+/**@brief Update connection parameters.
+ *
+ * @details In the central role this will initiate a Link Layer connection parameter update procedure,
+ * otherwise in the peripheral role, this will send the corresponding L2CAP request and wait for
+ * the central to perform the procedure. In both cases, and regardless of success or failure, the application
+ * will be informed of the result with a @ref BLE_GAP_EVT_CONN_PARAM_UPDATE event.
+ *
+ * @note If both a connection supervision timeout and a maximum connection interval are specified, then the following constraint
+ * applies: (conn_sup_timeout * 8) >= (max_conn_interval * (slave_latency + 1))
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] p_conn_params Pointer to desired connection parameters. If NULL is provided on a peripheral role,
+ * the parameters in the PPCP characteristic of the GAP service will be used instead.
+ *
+ * @return @ref NRF_SUCCESS The Connection Update procedure has been started successfully.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, check parameter limits and constraints.
+ * @return @ref NRF_ERROR_BUSY Procedure already in progress or not allowed at this time, process pending events and retry.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied.
+ * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ */
+SVCALL(SD_BLE_GAP_CONN_PARAM_UPDATE, uint32_t, sd_ble_gap_conn_param_update(uint16_t conn_handle, ble_gap_conn_params_t const * const p_conn_params));
+
+
+/**@brief Disconnect (GAP Link Termination).
+ *
+ * @details This call initiates the disconnection procedure, and its completion will be communicated to the application
+ * with a BLE_GAP_EVT_DISCONNECTED event.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] hci_status_code HCI status code, see @ref BLE_HCI_STATUS_CODES (accepted values are BTLE_REMOTE_USER_TERMINATED_CONNECTION and BTLE_CONN_INTERVAL_UNACCEPTABLE).
+ *
+ * @return @ref NRF_SUCCESS The disconnection procedure has been started successfully.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation (disconnection is already in progress or not connected at all).
+ */
+SVCALL(SD_BLE_GAP_DISCONNECT, uint32_t, sd_ble_gap_disconnect(uint16_t conn_handle, uint8_t hci_status_code));
+
+
+/**@brief Set the radio's transmit power.
+ *
+ * @param[in] tx_power Radio transmit power in dBm (accepted values are -40, -30, -20, -16, -12, -8, -4, 0, and 4 dBm).
+ *
+ * @note -40 dBm will not actually give -40 dBm, but will instead be remapped to -30 dBm.
+ *
+ * @return @ref NRF_SUCCESS Successfully changed the transmit power.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_BUSY The stack is busy, process pending events and retry.
+ */
+SVCALL(SD_BLE_GAP_TX_POWER_SET, uint32_t, sd_ble_gap_tx_power_set(int8_t tx_power));
+
+
+/**@brief Set GAP Appearance value.
+ *
+ * @param[in] appearance Appearance (16-bit), see @ref BLE_APPEARANCES.
+ *
+ * @return @ref NRF_SUCCESS Appearance value set successfully.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ */
+SVCALL(SD_BLE_GAP_APPEARANCE_SET, uint32_t, sd_ble_gap_appearance_set(uint16_t appearance));
+
+
+/**@brief Get GAP Appearance value.
+ *
+ * @param[out] p_appearance Appearance (16-bit), see @ref BLE_APPEARANCES.
+ *
+ * @return @ref NRF_SUCCESS Appearance value retrieved successfully.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ */
+SVCALL(SD_BLE_GAP_APPEARANCE_GET, uint32_t, sd_ble_gap_appearance_get(uint16_t * const p_appearance));
+
+
+/**@brief Set GAP Peripheral Preferred Connection Parameters.
+ *
+ * @param[in] p_conn_params Pointer to a @ref ble_gap_conn_params_t structure with the desired parameters.
+ *
+ * @return @ref NRF_SUCCESS Peripheral Preferred Connection Parameters set successfully.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ */
+SVCALL(SD_BLE_GAP_PPCP_SET, uint32_t, sd_ble_gap_ppcp_set(ble_gap_conn_params_t const * const p_conn_params));
+
+
+/**@brief Get GAP Peripheral Preferred Connection Parameters.
+ *
+ * @param[out] p_conn_params Pointer to a @ref ble_gap_conn_params_t structure where the parameters will be stored.
+ *
+ * @return @ref NRF_SUCCESS Peripheral Preferred Connection Parameters retrieved successfully.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ */
+SVCALL(SD_BLE_GAP_PPCP_GET, uint32_t, sd_ble_gap_ppcp_get(ble_gap_conn_params_t * const p_conn_params));
+
+
+/**@brief Set GAP device name.
+ *
+ * @param[in] p_write_perm Write permissions for the Device Name characteristic see @ref ble_gap_conn_sec_mode_t.
+ * @param[in] p_dev_name Pointer to a UTF-8 encoded, <b>non NULL-terminated</b> string.
+ * @param[in] len Length of the UTF-8, <b>non NULL-terminated</b> string pointed to by p_dev_name in octets (must be smaller or equal than @ref BLE_GAP_DEVNAME_MAX_LEN).
+ *
+ * @return @ref NRF_SUCCESS GAP device name and permissions set successfully.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied.
+ */
+SVCALL(SD_BLE_GAP_DEVICE_NAME_SET, uint32_t, sd_ble_gap_device_name_set(ble_gap_conn_sec_mode_t const * const p_write_perm, uint8_t const * const p_dev_name, uint16_t len));
+
+
+/**@brief Get GAP device name.
+ *
+ * @param[in] p_dev_name Pointer to an empty buffer where the UTF-8 <b>non NULL-terminated</b> string will be placed. Set to NULL to obtain the complete device name length.
+ * @param[in,out] p_len Length of the buffer pointed by p_dev_name, complete device name length on output.
+ *
+ * @note If the device name is longer than the size of the supplied buffer,
+ * p_len will return the complete device name length,
+ * and not the number of bytes actually returned in p_dev_name.
+ * The application may use this information to allocate a suitable buffer size.
+ *
+ * @return @ref NRF_SUCCESS GAP device name retrieved successfully.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied.
+ */
+SVCALL(SD_BLE_GAP_DEVICE_NAME_GET, uint32_t, sd_ble_gap_device_name_get(uint8_t * const p_dev_name, uint16_t * const p_len));
+
+
+/**@brief Initiate GAP Authentication procedure.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] p_sec_params Pointer to the @ref ble_gap_sec_params_t structure with the security parameters to be used during the pairing procedure.
+ *
+ * @details In the central role, this function will send an SMP Pairing Request, otherwise in the peripheral role, an SMP Security Request will be sent.
+ * In the peripheral role, only the timeout, bond and mitm fields of @ref ble_gap_sec_params_t are used.
+ *
+ * @note The GAP Authentication procedure may be triggered by the central without calling this function when accessing a secure service.
+ * @note Calling this function may result in the following events depending on the outcome and parameters: @ref BLE_GAP_EVT_SEC_PARAMS_REQUEST,
+ * @ref BLE_GAP_EVT_SEC_INFO_REQUEST, @ref BLE_GAP_EVT_AUTH_KEY_REQUEST, @ref BLE_GAP_EVT_AUTH_STATUS.
+ * @note The timeout parameter in @ref ble_gap_sec_params_t is interpreted here as the Security Request timeout
+ *
+ *
+ * @return @ref NRF_SUCCESS Successfully initiated authentication procedure.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied.
+ * @return @ref NRF_ERROR_TIMEOUT A SMP timeout has occured, and further SMP operations on this link is prohibited.
+ */
+SVCALL(SD_BLE_GAP_AUTHENTICATE, uint32_t, sd_ble_gap_authenticate(uint16_t conn_handle, ble_gap_sec_params_t const * const p_sec_params));
+
+
+/**@brief Reply with GAP security parameters.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] sec_status Security status, see @ref BLE_GAP_SEC_STATUS.
+ * @param[in] p_sec_params Pointer to a @ref ble_gap_sec_params_t security parameters structure.
+ *
+ * @details This function is only used to reply to a @ref BLE_GAP_EVT_SEC_PARAMS_REQUEST, calling it at other times will result in an NRF_ERROR_INVALID_STATE.
+ * @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters.
+ * @note The timeout parameter in @ref ble_gap_sec_params_t is interpreted here as the SMP procedure timeout, and must be 30 seconds. The function will fail
+ * if the application supplies a different value.
+ *
+ * @return @ref NRF_SUCCESS Successfully accepted security parameter from the application.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied.
+ */
+SVCALL(SD_BLE_GAP_SEC_PARAMS_REPLY, uint32_t, sd_ble_gap_sec_params_reply(uint16_t conn_handle, uint8_t sec_status, ble_gap_sec_params_t const * const p_sec_params));
+
+
+/**@brief Reply with an authentication key.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] key_type See @ref BLE_GAP_AUTH_KEY_TYPES.
+ * @param[in] key If key type is BLE_GAP_AUTH_KEY_TYPE_NONE, then NULL.
+ * If key type is BLE_GAP_AUTH_KEY_TYPE_PASSKEY, then a 6-byte ASCII string (digit 0..9 only, no NULL termination).
+ * If key type is BLE_GAP_AUTH_KEY_TYPE_OOB, then a 16-byte OOB key value in Little Endian format.
+ *
+ * @details This function is only used to reply to a @ref BLE_GAP_EVT_AUTH_KEY_REQUEST, calling it at other times will result in an NRF_ERROR_INVALID_STATE.
+ * @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters.
+ *
+ * @return @ref NRF_SUCCESS Authentication key successfully set.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied.
+ */
+SVCALL(SD_BLE_GAP_AUTH_KEY_REPLY, uint32_t, sd_ble_gap_auth_key_reply(uint16_t conn_handle, uint8_t key_type, uint8_t const * const key));
+
+
+/**@brief Reply with GAP security information.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] p_enc_info Pointer to a @ref ble_gap_enc_info_t encryption information structure. May be NULL to signal none is available.
+ * @param[in] p_sign_info Pointer to a @ref ble_gap_sign_info_t signing information structure. May be NULL to signal none is available.
+ *
+ * @details This function is only used to reply to a @ref BLE_GAP_EVT_SEC_INFO_REQUEST, calling it at other times will result in NRF_ERROR_INVALID_STATE.
+ * @note If the call returns an error code, the request is still pending, and the reply call may be repeated with corrected parameters.
+ * @note Data signing is not implemented yet. p_sign_info must therefore be NULL.
+ *
+ * @return @ref NRF_SUCCESS Successfully accepted security information.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied.
+ * @return @ref NRF_ERROR_BUSY The stack is busy, process pending events and retry.
+ */
+SVCALL(SD_BLE_GAP_SEC_INFO_REPLY, uint32_t, sd_ble_gap_sec_info_reply(uint16_t conn_handle, ble_gap_enc_info_t const * const p_enc_info, ble_gap_sign_info_t const * const p_sign_info));
+
+
+/**@brief Get the current connection security.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[out] p_conn_sec Pointer to a @ref ble_gap_conn_sec_t structure to be filled in.
+ *
+ * @return @ref NRF_SUCCESS Current connection security successfully retrieved.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied.
+ */
+SVCALL(SD_BLE_GAP_CONN_SEC_GET, uint32_t, sd_ble_gap_conn_sec_get(uint16_t conn_handle, ble_gap_conn_sec_t * const p_conn_sec));
+
+
+/**@brief Start reporting the received signal strength to the application.
+ *
+ * A new event is reported whenever the RSSI value changes, until @ref sd_ble_gap_rssi_stop is called.
+ *
+ * @param[in] conn_handle Connection handle.
+ *
+ * @return @ref NRF_SUCCESS Successfully activated RSSI reporting.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied.
+ */
+SVCALL(SD_BLE_GAP_RSSI_START, uint32_t, sd_ble_gap_rssi_start(uint16_t conn_handle));
+
+
+/**@brief Stop reporting the received singnal strength.
+ *
+ * An RSSI change detected before the call but not yet received by the application
+ * may be reported after @ref sd_ble_gap_rssi_stop has been called.
+ *
+ * @param[in] conn_handle Connection handle.
+ *
+ * @return @ref NRF_SUCCESS Successfully deactivated RSSI reporting.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid connection handle supplied.
+ */
+SVCALL(SD_BLE_GAP_RSSI_STOP, uint32_t, sd_ble_gap_rssi_stop(uint16_t conn_handle));
+/**@} */
+
+#endif // BLE_GAP_H__
+
+/**
+ @}
+*/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/s110_nrf51822_7_1_0/s110_nrf51822_7.1.0_API/include/ble_gatt.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,171 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+ /**
+ @addtogroup BLE_GATT Generic Attribute Profile (GATT) Common
+ @{
+ @brief Common definitions and prototypes for the GATT interfaces.
+ */
+
+#ifndef BLE_GATT_H__
+#define BLE_GATT_H__
+
+#include "ble_types.h"
+#include "ble_ranges.h"
+
+
+/** @addtogroup BLE_GATT_DEFINES Defines
+ * @{ */
+
+/** @brief Default MTU size. */
+#define GATT_MTU_SIZE_DEFAULT 23
+
+/** @brief Only the default MTU size of 23 is currently supported. */
+#define GATT_RX_MTU 23
+
+
+/**@brief Invalid Attribute Handle. */
+#define BLE_GATT_HANDLE_INVALID 0x0000
+
+/** @defgroup BLE_GATT_TIMEOUT_SOURCES GATT Timeout sources
+ * @{ */
+#define BLE_GATT_TIMEOUT_SRC_PROTOCOL 0x00 /**< ATT Protocol timeout. */
+/** @} */
+
+/** @defgroup BLE_GATT_WRITE_OPS GATT Write operations
+ * @{ */
+#define BLE_GATT_OP_INVALID 0x00 /**< Invalid Operation. */
+#define BLE_GATT_OP_WRITE_REQ 0x01 /**< Write Request. */
+#define BLE_GATT_OP_WRITE_CMD 0x02 /**< Write Command. */
+#define BLE_GATT_OP_SIGN_WRITE_CMD 0x03 /**< Signed Write Command. */
+#define BLE_GATT_OP_PREP_WRITE_REQ 0x04 /**< Prepare Write Request. */
+#define BLE_GATT_OP_EXEC_WRITE_REQ 0x05 /**< Execute Write Request. */
+/** @} */
+
+/** @defgroup BLE_GATT_EXEC_WRITE_FLAGS GATT Execute Write flags
+ * @{ */
+#define BLE_GATT_EXEC_WRITE_FLAG_PREPARED_CANCEL 0x00
+#define BLE_GATT_EXEC_WRITE_FLAG_PREPARED_WRITE 0x01
+/** @} */
+
+/** @defgroup BLE_GATT_HVX_TYPES GATT Handle Value operations
+ * @{ */
+#define BLE_GATT_HVX_INVALID 0x00 /**< Invalid Operation. */
+#define BLE_GATT_HVX_NOTIFICATION 0x01 /**< Handle Value Notification. */
+#define BLE_GATT_HVX_INDICATION 0x02 /**< Handle Value Indication. */
+/** @} */
+
+/** @defgroup BLE_GATT_STATUS_CODES GATT Status Codes
+ * @{ */
+#define BLE_GATT_STATUS_SUCCESS 0x0000 /**< Success. */
+#define BLE_GATT_STATUS_UNKNOWN 0x0001 /**< Unknown or not applicable status. */
+#define BLE_GATT_STATUS_ATTERR_INVALID 0x0100 /**< ATT Error: Invalid Error Code. */
+#define BLE_GATT_STATUS_ATTERR_INVALID_HANDLE 0x0101 /**< ATT Error: Invalid Attribute Handle. */
+#define BLE_GATT_STATUS_ATTERR_READ_NOT_PERMITTED 0x0102 /**< ATT Error: Read not permitted. */
+#define BLE_GATT_STATUS_ATTERR_WRITE_NOT_PERMITTED 0x0103 /**< ATT Error: Write not permitted. */
+#define BLE_GATT_STATUS_ATTERR_INVALID_PDU 0x0104 /**< ATT Error: Used in ATT as Invalid PDU. */
+#define BLE_GATT_STATUS_ATTERR_INSUF_AUTHENTICATION 0x0105 /**< ATT Error: Authenticated link required. */
+#define BLE_GATT_STATUS_ATTERR_REQUEST_NOT_SUPPORTED 0x0106 /**< ATT Error: Used in ATT as Request Not Supported. */
+#define BLE_GATT_STATUS_ATTERR_INVALID_OFFSET 0x0107 /**< ATT Error: Offset specified was past the end of the attribute. */
+#define BLE_GATT_STATUS_ATTERR_INSUF_AUTHORIZATION 0x0108 /**< ATT Error: Used in ATT as Insufficient Authorisation. */
+#define BLE_GATT_STATUS_ATTERR_PREPARE_QUEUE_FULL 0x0109 /**< ATT Error: Used in ATT as Prepare Queue Full. */
+#define BLE_GATT_STATUS_ATTERR_ATTRIBUTE_NOT_FOUND 0x010A /**< ATT Error: Used in ATT as Attribute not found. */
+#define BLE_GATT_STATUS_ATTERR_ATTRIBUTE_NOT_LONG 0x010B /**< ATT Error: Attribute cannot be read or written using read/write blob requests. */
+#define BLE_GATT_STATUS_ATTERR_INSUF_ENC_KEY_SIZE 0x010C /**< ATT Error: Encryption key size used is insufficient. */
+#define BLE_GATT_STATUS_ATTERR_INVALID_ATT_VAL_LENGTH 0x010D /**< ATT Error: Invalid value size. */
+#define BLE_GATT_STATUS_ATTERR_UNLIKELY_ERROR 0x010E /**< ATT Error: Very unlikely error. */
+#define BLE_GATT_STATUS_ATTERR_INSUF_ENCRYPTION 0x010F /**< ATT Error: Encrypted link required. */
+#define BLE_GATT_STATUS_ATTERR_UNSUPPORTED_GROUP_TYPE 0x0110 /**< ATT Error: Attribute type is not a supported grouping attribute. */
+#define BLE_GATT_STATUS_ATTERR_INSUF_RESOURCES 0x0111 /**< ATT Error: Encrypted link required. */
+#define BLE_GATT_STATUS_ATTERR_RFU_RANGE1_BEGIN 0x0112 /**< ATT Error: Reserved for Future Use range #1 begin. */
+#define BLE_GATT_STATUS_ATTERR_RFU_RANGE1_END 0x017F /**< ATT Error: Reserved for Future Use range #1 end. */
+#define BLE_GATT_STATUS_ATTERR_APP_BEGIN 0x0180 /**< ATT Error: Application range begin. */
+#define BLE_GATT_STATUS_ATTERR_APP_END 0x019F /**< ATT Error: Application range end. */
+#define BLE_GATT_STATUS_ATTERR_RFU_RANGE2_BEGIN 0x01A0 /**< ATT Error: Reserved for Future Use range #2 begin. */
+#define BLE_GATT_STATUS_ATTERR_RFU_RANGE2_END 0x01DF /**< ATT Error: Reserved for Future Use range #2 end. */
+#define BLE_GATT_STATUS_ATTERR_RFU_RANGE3_BEGIN 0x01E0 /**< ATT Error: Reserved for Future Use range #3 begin. */
+#define BLE_GATT_STATUS_ATTERR_RFU_RANGE3_END 0x01FC /**< ATT Error: Reserved for Future Use range #3 end. */
+#define BLE_GATT_STATUS_ATTERR_CPS_CCCD_CONFIG_ERROR 0x01FD /**< ATT Common Profile and Service Error: Client Characteristic Configuration Descriptor improperly configured. */
+#define BLE_GATT_STATUS_ATTERR_CPS_PROC_ALR_IN_PROG 0x01FE /**< ATT Common Profile and Service Error: Procedure Already in Progress. */
+#define BLE_GATT_STATUS_ATTERR_CPS_OUT_OF_RANGE 0x01FF /**< ATT Common Profile and Service Error: Out Of Range. */
+/** @} */
+
+
+/** @defgroup BLE_GATT_CPF_FORMATS Characteristic Presentation Formats
+ * @note Found at http://developer.bluetooth.org/gatt/descriptors/Pages/DescriptorViewer.aspx?u=org.bluetooth.descriptor.gatt.characteristic_presentation_format.xml
+ * @{ */
+#define BLE_GATT_CPF_FORMAT_RFU 0x00 /**< Reserved For Future Use. */
+#define BLE_GATT_CPF_FORMAT_BOOLEAN 0x01 /**< Boolean. */
+#define BLE_GATT_CPF_FORMAT_2BIT 0x02 /**< Unsigned 2-bit integer. */
+#define BLE_GATT_CPF_FORMAT_NIBBLE 0x03 /**< Unsigned 4-bit integer. */
+#define BLE_GATT_CPF_FORMAT_UINT8 0x04 /**< Unsigned 8-bit integer. */
+#define BLE_GATT_CPF_FORMAT_UINT12 0x05 /**< Unsigned 12-bit integer. */
+#define BLE_GATT_CPF_FORMAT_UINT16 0x06 /**< Unsigned 16-bit integer. */
+#define BLE_GATT_CPF_FORMAT_UINT24 0x07 /**< Unsigned 24-bit integer. */
+#define BLE_GATT_CPF_FORMAT_UINT32 0x08 /**< Unsigned 32-bit integer. */
+#define BLE_GATT_CPF_FORMAT_UINT48 0x09 /**< Unsigned 48-bit integer. */
+#define BLE_GATT_CPF_FORMAT_UINT64 0x0A /**< Unsigned 64-bit integer. */
+#define BLE_GATT_CPF_FORMAT_UINT128 0x0B /**< Unsigned 128-bit integer. */
+#define BLE_GATT_CPF_FORMAT_SINT8 0x0C /**< Signed 2-bit integer. */
+#define BLE_GATT_CPF_FORMAT_SINT12 0x0D /**< Signed 12-bit integer. */
+#define BLE_GATT_CPF_FORMAT_SINT16 0x0E /**< Signed 16-bit integer. */
+#define BLE_GATT_CPF_FORMAT_SINT24 0x0F /**< Signed 24-bit integer. */
+#define BLE_GATT_CPF_FORMAT_SINT32 0x10 /**< Signed 32-bit integer. */
+#define BLE_GATT_CPF_FORMAT_SINT48 0x11 /**< Signed 48-bit integer. */
+#define BLE_GATT_CPF_FORMAT_SINT64 0x12 /**< Signed 64-bit integer. */
+#define BLE_GATT_CPF_FORMAT_SINT128 0x13 /**< Signed 128-bit integer. */
+#define BLE_GATT_CPF_FORMAT_FLOAT32 0x14 /**< IEEE-754 32-bit floating point. */
+#define BLE_GATT_CPF_FORMAT_FLOAT64 0x15 /**< IEEE-754 64-bit floating point. */
+#define BLE_GATT_CPF_FORMAT_SFLOAT 0x16 /**< IEEE-11073 16-bit SFLOAT. */
+#define BLE_GATT_CPF_FORMAT_FLOAT 0x17 /**< IEEE-11073 32-bit FLOAT. */
+#define BLE_GATT_CPF_FORMAT_DUINT16 0x18 /**< IEEE-20601 format. */
+#define BLE_GATT_CPF_FORMAT_UTF8S 0x19 /**< UTF-8 string. */
+#define BLE_GATT_CPF_FORMAT_UTF16S 0x1A /**< UTF-16 string. */
+#define BLE_GATT_CPF_FORMAT_STRUCT 0x1B /**< Opaque Structure. */
+/** @} */
+
+/** @defgroup BLE_GATT_CPF_NAMESPACES GATT Bluetooth Namespaces
+ * @{
+ */
+#define BLE_GATT_CPF_NAMESPACE_BTSIG 0x01
+#define BLE_GATT_CPF_NAMESPACE_DESCRIPTION_UNKNOWN 0x0000
+/** @} */
+
+/** @} */
+
+/** @addtogroup BLE_GATT_STRUCTURES Structures
+ * @{ */
+
+/**@brief GATT Characteristic Properties. */
+typedef struct
+{
+ /* Standard properties */
+ uint8_t broadcast :1; /**< Broadcasting of value permitted. */
+ uint8_t read :1; /**< Reading value permitted. */
+ uint8_t write_wo_resp :1; /**< Writing value with Write Command permitted. */
+ uint8_t write :1; /**< Writing value with Write Request permitted. */
+ uint8_t notify :1; /**< Notications of value permitted. */
+ uint8_t indicate :1; /**< Indications of value permitted. */
+ uint8_t auth_signed_wr :1; /**< Writing value with Signed Write Command permitted. */
+} ble_gatt_char_props_t;
+
+/**@brief GATT Characteristic Extended Properties. */
+typedef struct
+{
+ /* Extended properties */
+ uint8_t reliable_wr :1; /**< Writing value with Queued Write Request permitted. */
+ uint8_t wr_aux :1; /**< Writing the Characteristic User Description permitted. */
+} ble_gatt_char_ext_props_t;
+
+#endif // BLE_GATT_H__
+
+/** @} */
+
+/**
+ @}
+ @}
+*/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/s110_nrf51822_7_1_0/s110_nrf51822_7.1.0_API/include/ble_gattc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,406 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+/**
+ @addtogroup BLE_GATTC Generic Attribute Profile (GATT) Client
+ @{
+ @brief Definitions and prototypes for the GATT Client interface.
+ */
+
+#ifndef BLE_GATTC_H__
+#define BLE_GATTC_H__
+
+#include "ble_gatt.h"
+#include "ble_types.h"
+#include "ble_ranges.h"
+#include "nrf_svc.h"
+
+/** @addtogroup BLE_GATTC_ENUMERATIONS Enumerations
+ * @{ */
+
+/**@brief GATTC API SVC numbers. */
+enum BLE_GATTC_SVCS
+{
+ SD_BLE_GATTC_PRIMARY_SERVICES_DISCOVER = BLE_GATTC_SVC_BASE, /**< Primary Service Discovery. */
+ SD_BLE_GATTC_RELATIONSHIPS_DISCOVER, /**< Relationship Discovery. */
+ SD_BLE_GATTC_CHARACTERISTICS_DISCOVER, /**< Characteristic Discovery. */
+ SD_BLE_GATTC_DESCRIPTORS_DISCOVER, /**< Characteristic Descriptor Discovery. */
+ SD_BLE_GATTC_CHAR_VALUE_BY_UUID_READ, /**< Read Characteristic Value by UUID. */
+ SD_BLE_GATTC_READ, /**< Generic read. */
+ SD_BLE_GATTC_CHAR_VALUES_READ, /**< Read multiple Characteristic Values. */
+ SD_BLE_GATTC_WRITE, /**< Generic write. */
+ SD_BLE_GATTC_HV_CONFIRM /**< Handle Value Confirmation. */
+};
+
+/** @} */
+
+/** @addtogroup BLE_GATTC_DEFINES Defines
+ * @{ */
+
+/** @defgroup BLE_ERRORS_GATTC SVC return values specific to GATTC
+ * @{ */
+#define BLE_ERROR_GATTC_PROC_NOT_PERMITTED (NRF_GATTC_ERR_BASE + 0x000)
+/** @} */
+
+/**@brief Last Attribute Handle. */
+#define BLE_GATTC_HANDLE_END 0xFFFF
+
+/** @} */
+
+/** @addtogroup BLE_GATTC_STRUCTURES Structures
+ * @{ */
+
+/**@brief Operation Handle Range. */
+typedef struct
+{
+ uint16_t start_handle; /**< Start Handle. */
+ uint16_t end_handle; /**< End Handle. */
+} ble_gattc_handle_range_t;
+
+
+/**@brief GATT service. */
+typedef struct
+{
+ ble_uuid_t uuid; /**< Service UUID. */
+ ble_gattc_handle_range_t handle_range; /**< Service Handle Range. */
+} ble_gattc_service_t;
+
+
+/**@brief GATT include. */
+typedef struct
+{
+ uint16_t handle; /**< Include Handle. */
+ ble_gattc_service_t included_srvc; /**< Handle of the included service. */
+} ble_gattc_include_t;
+
+
+/**@brief GATT characteristic. */
+typedef struct
+{
+ ble_uuid_t uuid; /**< Characteristic UUID. */
+ ble_gatt_char_props_t char_props; /**< Characteristic Properties. */
+ uint8_t char_ext_props : 1; /**< Extended properties present. */
+ uint16_t handle_decl; /**< Handle of the Characteristic Declaration. */
+ uint16_t handle_value; /**< Handle of the Characteristic Value. */
+} ble_gattc_char_t;
+
+
+/**@brief GATT descriptor. */
+typedef struct
+{
+ uint16_t handle; /**< Descriptor Handle. */
+ ble_uuid_t uuid; /**< Descriptor UUID. */
+} ble_gattc_desc_t;
+
+
+/**@brief Write Parameters. */
+typedef struct
+{
+ uint8_t write_op; /**< Write Operation to be performed, see @ref BLE_GATT_WRITE_OPS. */
+ uint16_t handle; /**< Handle to the attribute to be written. */
+ uint16_t offset; /**< Offset in bytes. @note For WRITE_CMD and WRITE_REQ, offset must be 0. */
+ uint16_t len; /**< Length of data in bytes. */
+ uint8_t* p_value; /**< Pointer to the value data. */
+ uint8_t flags; /**< Flags, see @ref BLE_GATT_EXEC_WRITE_FLAGS. */
+} ble_gattc_write_params_t;
+
+
+/**
+ * @brief GATT Client Event IDs.
+ */
+enum BLE_GATTC_EVTS
+{
+ BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP = BLE_GATTC_EVT_BASE, /**< Primary Service Discovery Response event. */
+ BLE_GATTC_EVT_REL_DISC_RSP, /**< Relationship Discovery Response event. */
+ BLE_GATTC_EVT_CHAR_DISC_RSP, /**< Characteristic Discovery Response event. */
+ BLE_GATTC_EVT_DESC_DISC_RSP, /**< Descriptor Discovery Response event. */
+ BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP, /**< Read By UUID Response event. */
+ BLE_GATTC_EVT_READ_RSP, /**< Read Response event. */
+ BLE_GATTC_EVT_CHAR_VALS_READ_RSP, /**< Read multiple Response event. */
+ BLE_GATTC_EVT_WRITE_RSP, /**< Write Response event. */
+ BLE_GATTC_EVT_HVX, /**< Handle Value Notification or Indication event. */
+ BLE_GATTC_EVT_TIMEOUT /**< Timeout event. */
+};
+
+/**@brief Event structure for BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP. */
+typedef struct
+{
+ uint16_t count; /**< Service count. */
+ ble_gattc_service_t services[1]; /**< Service data, variable length. */
+} ble_gattc_evt_prim_srvc_disc_rsp_t;
+
+/**@brief Event structure for BLE_GATTC_EVT_REL_DISC_RSP. */
+typedef struct
+{
+ uint16_t count; /**< Include count. */
+ ble_gattc_include_t includes[1]; /**< Include data, variable length. */
+} ble_gattc_evt_rel_disc_rsp_t;
+
+/**@brief Event structure for BLE_GATTC_EVT_CHAR_DISC_RSP. */
+typedef struct
+{
+ uint16_t count; /**< Characteristic count. */
+ ble_gattc_char_t chars[1]; /**< Characteristic data, variable length. */
+} ble_gattc_evt_char_disc_rsp_t;
+
+/**@brief Event structure for BLE_GATTC_EVT_DESC_DISC_RSP. */
+typedef struct
+{
+ uint16_t count; /**< Descriptor count. */
+ ble_gattc_desc_t descs[1]; /**< Descriptor data, variable length. */
+} ble_gattc_evt_desc_disc_rsp_t;
+
+/**@brief GATT read by UUID handle value pair. */
+typedef struct
+{
+ uint16_t handle; /**< Attribute Handle. */
+ uint8_t *p_value; /**< Pointer to value, variable length (length available as value_len in ble_gattc_evt_read_by_uuid_rsp_t).
+ Please note that this pointer is absolute to the memory provided by the user when retrieving the event,
+ so it will effectively point to a location inside the handle_value array. */
+} ble_gattc_handle_value_t;
+
+/**@brief Event structure for BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP. */
+typedef struct
+{
+ uint16_t count; /**< Handle-Value Pair Count. */
+ uint16_t value_len; /**< Length of the value in Handle-Value(s) list. */
+ ble_gattc_handle_value_t handle_value[1]; /**< Handle-Value(s) list, variable length. */
+} ble_gattc_evt_char_val_by_uuid_read_rsp_t;
+
+/**@brief Event structure for BLE_GATTC_EVT_READ_RSP. */
+typedef struct
+{
+ uint16_t handle; /**< Attribute Handle. */
+ uint16_t offset; /**< Offset of the attribute data. */
+ uint16_t len; /**< Attribute data length. */
+ uint8_t data[1]; /**< Attribute data, variable length. */
+} ble_gattc_evt_read_rsp_t;
+
+/**@brief Event structure for BLE_GATTC_EVT_CHAR_VALS_READ_RSP. */
+typedef struct
+{
+ uint16_t len; /**< Concatenated Attribute values length. */
+ uint8_t values[1]; /**< Attribute values, variable length. */
+} ble_gattc_evt_char_vals_read_rsp_t;
+
+/**@brief Event structure for BLE_GATTC_EVT_WRITE_RSP. */
+typedef struct
+{
+ uint16_t handle; /**< Attribute Handle. */
+ uint8_t write_op; /**< Type of write operation, see @ref BLE_GATT_WRITE_OPS. */
+ uint16_t offset; /**< Data Offset. */
+ uint16_t len; /**< Data length. */
+ uint8_t data[1]; /**< Data, variable length. */
+} ble_gattc_evt_write_rsp_t;
+
+/**@brief Event structure for BLE_GATTC_EVT_HVX. */
+typedef struct
+{
+ uint16_t handle; /**< Handle to which the HVx operation applies. */
+ uint8_t type; /**< Indication or Notification, see @ref BLE_GATT_HVX_TYPES. */
+ uint16_t len; /**< Attribute data length. */
+ uint8_t data[1]; /**< Attribute data, variable length. */
+} ble_gattc_evt_hvx_t;
+
+/**@brief Event structure for BLE_GATTC_EVT_TIMEOUT. */
+typedef struct
+{
+ uint8_t src; /**< Timeout source, see @ref BLE_GATT_TIMEOUT_SOURCES. */
+} ble_gattc_evt_timeout_t;
+
+/**@brief GATTC event type. */
+typedef struct
+{
+ uint16_t conn_handle; /**< Connection Handle on which event occured. */
+ uint16_t gatt_status; /**< GATT status code for the operation, see @ref BLE_GATT_STATUS_CODES. */
+ uint16_t error_handle; /**< In case of error: The handle causing the error. In all other cases BLE_GATT_HANDLE_INVALID. */
+ union
+ {
+ ble_gattc_evt_prim_srvc_disc_rsp_t prim_srvc_disc_rsp; /**< Primary Service Discovery Response Event Parameters. */
+ ble_gattc_evt_rel_disc_rsp_t rel_disc_rsp; /**< Relationship Discovery Response Event Parameters. */
+ ble_gattc_evt_char_disc_rsp_t char_disc_rsp; /**< Characteristic Discovery Response Event Parameters. */
+ ble_gattc_evt_desc_disc_rsp_t desc_disc_rsp; /**< Descriptor Discovery Response Event Parameters. */
+ ble_gattc_evt_char_val_by_uuid_read_rsp_t char_val_by_uuid_read_rsp; /**< Characteristic Value Read by UUID Response Event Parameters. */
+ ble_gattc_evt_read_rsp_t read_rsp; /**< Read Response Event Parameters. */
+ ble_gattc_evt_char_vals_read_rsp_t char_vals_read_rsp; /**< Characteristic Values Read Response Event Parameters. */
+ ble_gattc_evt_write_rsp_t write_rsp; /**< Write Response Event Parameters. */
+ ble_gattc_evt_hvx_t hvx; /**< Handle Value Notification/Indication Event Parameters. */
+ ble_gattc_evt_timeout_t timeout; /**< Timeout Event Parameters. */
+ } params; /**< Event Parameters. @note Only valid if @ref gatt_status == BLE_GATT_STATUS_SUCCESS. */
+} ble_gattc_evt_t;
+/** @} */
+
+/** @addtogroup BLE_GATTC_FUNCTIONS Functions
+ * @{ */
+
+/**@brief Initiate or continue a GATT Primary Service Discovery procedure.
+ *
+ * @details This function initiates a Primary Service discovery, starting from the supplied handle.
+ * If the last service has not been reached, this must be called again with an updated start handle value to continue the search.
+ *
+ * @note If any of the discovered services have 128-bit UUIDs which are not present in the table provided to ble_vs_uuids_assign, a UUID structure with
+ * type BLE_UUID_TYPE_UNKNOWN will be received in the corresponding event.
+ *
+ * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
+ * @param[in] start_handle Handle to start searching from.
+ * @param[in] p_srvc_uuid Pointer to the service UUID to be found. If it is NULL, all primary services will be returned.
+ *
+ * @return @ref NRF_SUCCESS Successfully started or resumed the Primary Service Discovery procedure.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_BUSY Client procedure already in progress.
+ */
+SVCALL(SD_BLE_GATTC_PRIMARY_SERVICES_DISCOVER, uint32_t, sd_ble_gattc_primary_services_discover(uint16_t conn_handle, uint16_t start_handle, ble_uuid_t const * const p_srvc_uuid));
+
+
+/**@brief Initiate or continue a GATT Relationship Discovery procedure.
+ *
+ * @details This function initiates the Find Included Services sub-procedure. If the last included service has not been reached,
+ * this must be called again with an updated handle range to continue the search.
+ *
+ * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
+ * @param[in] p_handle_range A pointer to the range of handles of the Service to perform this procedure on.
+ *
+ * @return @ref NRF_SUCCESS Successfully started or resumed the Relationship Discovery procedure.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_BUSY Client procedure already in progress.
+ */
+SVCALL(SD_BLE_GATTC_RELATIONSHIPS_DISCOVER, uint32_t, sd_ble_gattc_relationships_discover(uint16_t conn_handle, ble_gattc_handle_range_t const * const p_handle_range));
+
+
+/**@brief Initiate or continue a GATT Characteristic Discovery procedure.
+ *
+ * @details This function initiates a Characteristic discovery procedure. If the last Characteristic has not been reached,
+ * this must be called again with an updated handle range to continue the discovery.
+ *
+ * @note If any of the discovered characteristics have 128-bit UUIDs which are not present in the table provided to ble_vs_uuids_assign, a UUID structure with
+ * type BLE_UUID_TYPE_UNKNOWN will be received in the corresponding event.
+ *
+ * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
+ * @param[in] p_handle_range A pointer to the range of handles of the Service to perform this procedure on.
+ *
+ * @return @ref NRF_SUCCESS Successfully started or resumed the Characteristic Discovery procedure.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_BUSY Client procedure already in progress.
+ */
+SVCALL(SD_BLE_GATTC_CHARACTERISTICS_DISCOVER, uint32_t, sd_ble_gattc_characteristics_discover(uint16_t conn_handle, ble_gattc_handle_range_t const * const p_handle_range));
+
+
+/**@brief Initiate or continue a GATT Characteristic Descriptor Discovery procedure.
+ *
+ * @details This function initiates the Characteristic Descriptor discovery procedure. If the last Descriptor has not been reached,
+ * this must be called again with an updated handle range to continue the discovery.
+ *
+ * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
+ * @param[in] p_handle_range A pointer to the range of handles of the Characteristic to perform this procedure on.
+ *
+ * @return @ref NRF_SUCCESS Successfully started or resumed the Descriptor Discovery procedure.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_BUSY Client procedure already in progress.
+ */
+SVCALL(SD_BLE_GATTC_DESCRIPTORS_DISCOVER, uint32_t, sd_ble_gattc_descriptors_discover(uint16_t conn_handle, ble_gattc_handle_range_t const * const p_handle_range));
+
+
+/**@brief Initiate or continue a GATT Read using Characteristic UUID procedure.
+ *
+ * @details This function initiates the Read using Characteristic UUID procedure. If the last Characteristic has not been reached,
+ * this must be called again with an updated handle range to continue the discovery.
+ *
+ * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
+ * @param[in] p_uuid Pointer to a Characteristic value UUID to read.
+ * @param[in] p_handle_range A pointer to the range of handles to perform this procedure on.
+ *
+ * @return @ref NRF_SUCCESS Successfully started or resumed the Read using Characteristic UUID procedure.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_BUSY Client procedure already in progress.
+ */
+SVCALL(SD_BLE_GATTC_CHAR_VALUE_BY_UUID_READ, uint32_t, sd_ble_gattc_char_value_by_uuid_read(uint16_t conn_handle, ble_uuid_t const * const p_uuid, ble_gattc_handle_range_t const * const p_handle_range));
+
+
+/**@brief Initiate or continue a GATT Read (Long) Characteristic or Descriptor procedure.
+ *
+ * @details This function initiates a GATT Read (Long) Characteristic or Descriptor procedure. If the Characteristic or Descriptor
+ * to be read is longer than GATT_MTU - 1, this function must be called multiple times with appropriate offset to read the
+ * complete value.
+ *
+ * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
+ * @param[in] handle The handle of the attribute to be read.
+ * @param[in] offset Offset into the attribute value to be read.
+ *
+ * @return @ref NRF_SUCCESS Successfully started or resumed the Read (Long) procedure.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_BUSY Client procedure already in progress.
+ */
+SVCALL(SD_BLE_GATTC_READ, uint32_t, sd_ble_gattc_read(uint16_t conn_handle, uint16_t handle, uint16_t offset));
+
+
+/**@brief Initiate a GATT Read Multiple Characteristic Values procedure.
+ *
+ * @details This function initiates a GATT Read Multiple Characteristic Values procedure.
+ *
+ * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
+ * @param[in] p_handles A pointer to the handle(s) of the attribute(s) to be read.
+ * @param[in] handle_count The number of handles in p_handles.
+ *
+ * @return @ref NRF_SUCCESS Successfully started the Read Multiple Characteristic Values procedure.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_BUSY Client procedure already in progress.
+ */
+SVCALL(SD_BLE_GATTC_CHAR_VALUES_READ, uint32_t, sd_ble_gattc_char_values_read(uint16_t conn_handle, uint16_t const * const p_handles, uint16_t handle_count));
+
+
+/**@brief Perform a Write (Characteristic Value or Descriptor, with or without response, signed or not, long or reliable) procedure.
+ *
+ * @details This function can perform all write procedures described in GATT.
+ *
+ * @note It is important to note that a write without response will <b>consume an application buffer</b>, and will therefore
+ * generate a @ref BLE_EVT_TX_COMPLETE event when the packet has been transmitted. A write on the other hand will use the
+ * standard client internal buffer and thus will only generate a @ref BLE_GATTC_EVT_WRITE_RSP event as soon as the write response
+ * has been received from the peer. Please see the documentation of @ref sd_ble_tx_buffer_count_get for more details.
+ *
+ * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
+ * @param[in] p_write_params A pointer to a write parameters structure.
+ *
+ * @return @ref NRF_SUCCESS Successfully started the Write procedure.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied.
+ * @return @ref NRF_ERROR_BUSY Procedure already in progress.
+ * @return @ref BLE_ERROR_NO_TX_BUFFERS There are no available buffers left.
+ */
+SVCALL(SD_BLE_GATTC_WRITE, uint32_t, sd_ble_gattc_write(uint16_t conn_handle, ble_gattc_write_params_t const * const p_write_params));
+
+
+/**@brief Send a Handle Value Confirmation to the GATT Server.
+ *
+ * @param[in] conn_handle The connection handle identifying the connection to perform this procedure on.
+ * @param[in] handle The handle of the attribute in the indication.
+ *
+ * @return @ref NRF_SUCCESS Successfully queued the Handle Value Confirmation for transmission.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_STATE No Indication pending to be confirmed.
+ * @return @ref BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle.
+ * @return @ref BLE_ERROR_NO_TX_BUFFERS There are no available buffers left.
+ */
+SVCALL(SD_BLE_GATTC_HV_CONFIRM, uint32_t, sd_ble_gattc_hv_confirm(uint16_t conn_handle, uint16_t handle));
+
+/** @} */
+
+#endif /* BLE_GATTC_H__ */
+
+/**
+ @}
+ @}
+*/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/s110_nrf51822_7_1_0/s110_nrf51822_7.1.0_API/include/ble_gatts.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,566 @@
+/* Copyright (c) 2011 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+/**
+ @addtogroup BLE_GATTS Generic Attribute Profile (GATT) Server
+ @{
+ @brief Definitions and prototypes for the GATTS interface.
+ */
+
+#ifndef BLE_GATTS_H__
+#define BLE_GATTS_H__
+
+#include "ble_types.h"
+#include "ble_ranges.h"
+#include "ble_l2cap.h"
+#include "ble_gap.h"
+#include "ble_gatt.h"
+#include "nrf_svc.h"
+
+/** @addtogroup BLE_GATTS_ENUMERATIONS Enumerations
+ * @{ */
+
+/**
+ * @brief GATTS API SVC numbers.
+ */
+enum BLE_GATTS_SVCS
+{
+ SD_BLE_GATTS_SERVICE_ADD = BLE_GATTS_SVC_BASE, /**< Add a service. */
+ SD_BLE_GATTS_INCLUDE_ADD, /**< Add an included service. */
+ SD_BLE_GATTS_CHARACTERISTIC_ADD, /**< Add a characteristic. */
+ SD_BLE_GATTS_DESCRIPTOR_ADD, /**< Add a generic attribute. */
+ SD_BLE_GATTS_VALUE_SET, /**< Set an attribute value. */
+ SD_BLE_GATTS_VALUE_GET, /**< Get an attribute value. */
+ SD_BLE_GATTS_HVX, /**< Handle Value Notification or Indication. */
+ SD_BLE_GATTS_SERVICE_CHANGED, /**< Perform a Service Changed Indication to one or more peers. */
+ SD_BLE_GATTS_RW_AUTHORIZE_REPLY, /**< Reply to an authorization request for a read or write operation on one or more attributes. */
+ SD_BLE_GATTS_SYS_ATTR_SET, /**< Set the persistent system attributes for a connection. */
+ SD_BLE_GATTS_SYS_ATTR_GET, /**< Get updated persistent system attributes after terminating a connection. */
+};
+
+/** @} */
+
+/** @addtogroup BLE_GATTS_DEFINES Defines
+ * @{ */
+
+/** @brief Only the default MTU size of 23 is currently supported. */
+#define GATT_RX_MTU 23
+
+/** @defgroup BLE_ERRORS_GATTS SVC return values specific to GATTS
+ * @{ */
+#define BLE_ERROR_GATTS_INVALID_ATTR_TYPE (NRF_GATTS_ERR_BASE + 0x000) /**< Invalid attribute type. */
+#define BLE_ERROR_GATTS_SYS_ATTR_MISSING (NRF_GATTS_ERR_BASE + 0x001) /**< System Attributes missing. */
+/** @} */
+
+/** @defgroup BLE_GATTS_ATTR_LENS_MAX Maximum attribute lengths
+ * @{ */
+#define BLE_GATTS_FIX_ATTR_LEN_MAX (510) /**< Maximum length for fixed length Attribute Values. */
+#define BLE_GATTS_VAR_ATTR_LEN_MAX (512) /**< Maximum length for variable length Attribute Values. */
+/** @} */
+
+/** @defgroup BLE_GATTS_SRVC_TYPES GATT Server Service Types
+ * @{ */
+#define BLE_GATTS_SRVC_TYPE_INVALID 0x00 /**< Invalid Service Type. */
+#define BLE_GATTS_SRVC_TYPE_PRIMARY 0x01 /**< Primary Service. */
+#define BLE_GATTS_SRVC_TYPE_SECONDARY 0x02 /**< Secondary Type. */
+/** @} */
+
+
+/** @defgroup BLE_GATTS_ATTR_TYPES GATT Server Attribute Types
+ * @{ */
+#define BLE_GATTS_ATTR_TYPE_INVALID 0x00 /**< Invalid Attribute Type. */
+#define BLE_GATTS_ATTR_TYPE_PRIM_SRVC_DECL 0x01 /**< Primary Service Declaration. */
+#define BLE_GATTS_ATTR_TYPE_SEC_SRVC_DECL 0x02 /**< Secondary Service Declaration. */
+#define BLE_GATTS_ATTR_TYPE_INC_DECL 0x03 /**< Include Declaration. */
+#define BLE_GATTS_ATTR_TYPE_CHAR_DECL 0x04 /**< Characteristic Declaration. */
+#define BLE_GATTS_ATTR_TYPE_CHAR_VAL 0x05 /**< Characteristic Value. */
+#define BLE_GATTS_ATTR_TYPE_DESC 0x06 /**< Descriptor. */
+#define BLE_GATTS_ATTR_TYPE_OTHER 0x07 /**< Other, non-GATT specific type. */
+/** @} */
+
+
+/** @defgroup BLE_GATTS_OPS GATT Server Operations
+ * @{ */
+#define BLE_GATTS_OP_INVALID 0x00 /**< Invalid Operation. */
+#define BLE_GATTS_OP_WRITE_REQ 0x01 /**< Write Request. */
+#define BLE_GATTS_OP_WRITE_CMD 0x02 /**< Write Command. */
+#define BLE_GATTS_OP_SIGN_WRITE_CMD 0x03 /**< Signed Write Command. */
+#define BLE_GATTS_OP_PREP_WRITE_REQ 0x04 /**< Prepare Write Request. */
+#define BLE_GATTS_OP_EXEC_WRITE_REQ_CANCEL 0x05 /**< Execute Write Request: Cancel all prepared writes. */
+#define BLE_GATTS_OP_EXEC_WRITE_REQ_NOW 0x06 /**< Execute Write Request: Immediately execute all prepared writes. */
+/** @} */
+
+/** @defgroup BLE_GATTS_VLOCS GATT Value Locations
+ * @{ */
+#define BLE_GATTS_VLOC_INVALID 0x00 /**< Invalid Location. */
+#define BLE_GATTS_VLOC_STACK 0x01 /**< Attribute Value is located in stack memory, no user memory is required. */
+#define BLE_GATTS_VLOC_USER 0x02 /**< Attribute Value is located in user memory. This requires the user to maintain a valid buffer through the lifetime of the attribute, since the stack
+ will read and write directly to the memory using the pointer provided in the APIs. There are no alignment requirements for the buffer. */
+/** @} */
+
+/** @defgroup BLE_GATTS_AUTHORIZE_TYPES GATT Server Authorization Types
+ * @{ */
+#define BLE_GATTS_AUTHORIZE_TYPE_INVALID 0x00 /**< Invalid Type. */
+#define BLE_GATTS_AUTHORIZE_TYPE_READ 0x01 /**< Authorize a Read Operation. */
+#define BLE_GATTS_AUTHORIZE_TYPE_WRITE 0x02 /**< Authorize a Write Request Operation. */
+/** @} */
+
+
+/** @} */
+
+/** @addtogroup BLE_GATTS_STRUCTURES Structures
+ * @{ */
+
+/**
+ * @brief BLE GATTS init options
+ */
+typedef struct
+{
+ uint8_t service_changed:1; /**< Include the Service Changed characteristic in the local attributes. */
+} ble_gatts_enable_params_t;
+
+/**@brief Attribute metadata. */
+typedef struct
+{
+ ble_gap_conn_sec_mode_t read_perm; /**< Read permissions. */
+ ble_gap_conn_sec_mode_t write_perm; /**< Write permissions. */
+ uint8_t vlen :1; /**< Variable length attribute. */
+ uint8_t vloc :2; /**< Value location, see @ref BLE_GATTS_VLOCS.*/
+ uint8_t rd_auth :1; /**< Read Authorization and value will be requested from the application on every read operation. */
+ uint8_t wr_auth :1; /**< Write Authorization will be requested from the application on every Write Request operation (but not Write Command). */
+} ble_gatts_attr_md_t;
+
+
+/**@brief GATT Attribute. */
+typedef struct
+{
+ ble_uuid_t* p_uuid; /**< Pointer to the attribute UUID. */
+ ble_gatts_attr_md_t* p_attr_md; /**< Pointer to the attribute metadata structure. */
+ uint16_t init_len; /**< Initial attribute value length in bytes. */
+ uint16_t init_offs; /**< Initial attribute value offset in bytes. If different from zero, the first init_offs bytes of the attribute value will be left uninitialized. */
+ uint16_t max_len; /**< Maximum attribute value length in bytes, see @ref BLE_GATTS_ATTR_LENS_MAX for maximum values. */
+ uint8_t* p_value; /**< Pointer to the attribute data. Please note that if the @ref BLE_GATTS_VLOC_USER value location is selected in the attribute metadata, this will have to point to a buffer
+ that remains valid through the lifetime of the attribute. This excludes usage of automatic variables that may go out of scope or any other temporary location.
+ The stack may access that memory directly without the application's knowledge. */
+} ble_gatts_attr_t;
+
+
+/**@brief GATT Attribute Context. */
+typedef struct
+{
+ ble_uuid_t srvc_uuid; /**< Service UUID. */
+ ble_uuid_t char_uuid; /**< Characteristic UUID if applicable (BLE_UUID_TYPE_UNKNOWN if N/A). */
+ ble_uuid_t desc_uuid; /**< Descriptor UUID if applicable (BLE_UUID_TYPE_UNKNOWN if N/A). */
+ uint16_t srvc_handle; /**< Service Handle. */
+ uint16_t value_handle; /**< Characteristic Handle if applicable (BLE_GATT_HANDLE_INVALID if N/A). */
+ uint8_t type; /**< Attribute Type, see @ref BLE_GATTS_ATTR_TYPES. */
+} ble_gatts_attr_context_t;
+
+
+/**@brief GATT Characteristic Presentation Format. */
+typedef struct
+{
+ uint8_t format; /**< Format of the value, see @ref BLE_GATT_CPF_FORMATS. */
+ int8_t exponent; /**< Exponent for integer data types. */
+ uint16_t unit; /**< UUID from Bluetooth Assigned Numbers. */
+ uint8_t name_space; /**< Namespace from Bluetooth Assigned Numbers, see @ref BLE_GATT_CPF_NAMESPACES. */
+ uint16_t desc; /**< Namespace description from Bluetooth Assigned Numbers, see @ref BLE_GATT_CPF_NAMESPACES. */
+} ble_gatts_char_pf_t;
+
+
+/**@brief GATT Characteristic metadata. */
+typedef struct
+{
+ ble_gatt_char_props_t char_props; /**< Characteristic Properties. */
+ ble_gatt_char_ext_props_t char_ext_props; /**< Characteristic Extended Properties. */
+ uint8_t* p_char_user_desc; /**< Pointer to a UTF-8, NULL if the descriptor is not required. */
+ uint16_t char_user_desc_max_size; /**< The maximum size in bytes of the user description descriptor. */
+ uint16_t char_user_desc_size; /**< The size of the user description, must be smaller or equal to char_user_desc_max_size. */
+ ble_gatts_char_pf_t* p_char_pf; /**< Pointer to a presentation format structure or NULL if the descriptor is not required. */
+ ble_gatts_attr_md_t* p_user_desc_md; /**< Attribute metadata for the User Description descriptor, or NULL for default values. */
+ ble_gatts_attr_md_t* p_cccd_md; /**< Attribute metadata for the Client Characteristic Configuration Descriptor, or NULL for default values. */
+ ble_gatts_attr_md_t* p_sccd_md; /**< Attribute metadata for the Server Characteristic Configuration Descriptor, or NULL for default values. */
+} ble_gatts_char_md_t;
+
+
+/**@brief GATT Characteristic Definition Handles. */
+typedef struct
+{
+ uint16_t value_handle; /**< Handle to the characteristic value. */
+ uint16_t user_desc_handle; /**< Handle to the User Description descriptor, or BLE_GATT_HANDLE_INVALID if not present. */
+ uint16_t cccd_handle; /**< Handle to the Client Characteristic Configuration Descriptor, or BLE_GATT_HANDLE_INVALID if not present. */
+ uint16_t sccd_handle; /**< Handle to the Server Characteristic Configuration Descriptor, or BLE_GATT_HANDLE_INVALID if not present. */
+} ble_gatts_char_handles_t;
+
+
+/**@brief GATT HVx parameters. */
+typedef struct
+{
+ uint16_t handle; /**< Characteristic Value Handle. */
+ uint8_t type; /**< Indication or Notification, see @ref BLE_GATT_HVX_TYPES. */
+ uint16_t offset; /**< Offset within the attribute value. */
+ uint16_t* p_len; /**< Length in bytes to be written, length in bytes written after successful return. */
+ uint8_t* p_data; /**< Actual data content, use NULL to use the current attribute value. */
+} ble_gatts_hvx_params_t;
+
+/**@brief GATT Read Authorization parameters. */
+typedef struct
+{
+ uint16_t gatt_status; /**< GATT status code for the operation, see @ref BLE_GATT_STATUS_CODES. */
+ uint8_t update : 1; /**< If set, data supplied in p_data will be used in the ATT response. */
+ uint16_t offset; /**< Offset of the attribute value being updated. */
+ uint16_t len; /**< Length in bytes of the value in p_data pointer, see @ref BLE_GATTS_ATTR_LENS_MAX. */
+ uint8_t* p_data; /**< Pointer to new value used to update the attribute value. */
+} ble_gatts_read_authorize_params_t;
+
+/**@brief GATT Write Authorisation parameters. */
+typedef struct
+{
+ uint16_t gatt_status; /**< GATT status code for the operation, see @ref BLE_GATT_STATUS_CODES. */
+} ble_gatts_write_authorize_params_t;
+
+/**@brief GATT Read or Write Authorize Reply parameters. */
+typedef struct
+{
+ uint8_t type; /**< Type of authorize operation, see @ref BLE_GATTS_AUTHORIZE_TYPES. */
+ union {
+ ble_gatts_read_authorize_params_t read; /**< Read authorization parameters. */
+ ble_gatts_write_authorize_params_t write; /**< Write authorization parameters. */
+ } params;
+} ble_gatts_rw_authorize_reply_params_t;
+
+
+/**
+ * @brief GATT Server Event IDs.
+ */
+enum BLE_GATTS_EVTS
+{
+ BLE_GATTS_EVT_WRITE = BLE_GATTS_EVT_BASE, /**< Write operation performed. */
+ BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST, /**< Read/Write Authorization request. */
+ BLE_GATTS_EVT_SYS_ATTR_MISSING, /**< A persistent system attribute access is pending, awaiting a sd_ble_gatts_sys_attr_set(). */
+ BLE_GATTS_EVT_HVC, /**< Handle Value Confirmation. */
+ BLE_GATTS_EVT_SC_CONFIRM, /**< Service Changed Confirmation. */
+ BLE_GATTS_EVT_TIMEOUT /**< Timeout. */
+};
+
+
+/**@brief Event structure for BLE_GATTS_EVT_WRITE. */
+typedef struct
+{
+ uint16_t handle; /**< Attribute Handle. */
+ uint8_t op; /**< Type of write operation, see @ref BLE_GATTS_OPS. */
+ ble_gatts_attr_context_t context; /**< Attribute Context. */
+ uint16_t offset; /**< Offset for the write operation. */
+ uint16_t len; /**< Length of the incoming data. */
+ uint8_t data[1]; /**< Incoming data, variable length. */
+} ble_gatts_evt_write_t;
+
+/**@brief Event structure for authorize read request. */
+typedef struct
+{
+ uint16_t handle; /**< Attribute Handle. */
+ ble_gatts_attr_context_t context; /**< Attribute Context. */
+ uint16_t offset; /**< Offset for the read operation. */
+} ble_gatts_evt_read_t;
+
+/**@brief Event structure for BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST. */
+typedef struct
+{
+ uint8_t type; /**< Type of authorize operation, see @ref BLE_GATTS_AUTHORIZE_TYPES. */
+ union {
+ ble_gatts_evt_read_t read; /**< Attribute Read Parameters. */
+ ble_gatts_evt_write_t write; /**< Attribute Write Parameters. */
+ } request;
+} ble_gatts_evt_rw_authorize_request_t;
+
+/**@brief Event structure for BLE_GATTS_EVT_SYS_ATTR_MISSING. */
+typedef struct
+{
+ uint8_t hint;
+} ble_gatts_evt_sys_attr_missing_t;
+
+
+/**@brief Event structure for BLE_GATTS_EVT_HVC. */
+typedef struct
+{
+ uint16_t handle; /**< Attribute Handle. */
+} ble_gatts_evt_hvc_t;
+
+/**@brief Event structure for BLE_GATTS_EVT_TIMEOUT. */
+typedef struct
+{
+ uint8_t src; /**< Timeout source, see @ref BLE_GATT_TIMEOUT_SOURCES. */
+} ble_gatts_evt_timeout_t;
+
+
+/**@brief GATT Server event callback event structure. */
+typedef struct
+{
+ uint16_t conn_handle; /**< Connection Handle on which event occurred. */
+ union
+ {
+ ble_gatts_evt_write_t write; /**< Write Event Parameters. */
+ ble_gatts_evt_rw_authorize_request_t authorize_request; /**< Read or Write Authorize Request Parameters. */
+ ble_gatts_evt_sys_attr_missing_t sys_attr_missing; /**< System attributes missing. */
+ ble_gatts_evt_hvc_t hvc; /**< Handle Value Confirmation Event Parameters. */
+ ble_gatts_evt_timeout_t timeout; /**< Timeout Event. */
+ } params;
+} ble_gatts_evt_t;
+
+/** @} */
+
+/** @addtogroup BLE_GATTS_FUNCTIONS Functions
+ * @{ */
+
+/**@brief Add a service declaration to the local server ATT table.
+ *
+ * @param[in] type Toggles between primary and secondary services, see @ref BLE_GATTS_SRVC_TYPES.
+ * @param[in] p_uuid Pointer to service UUID.
+ * @param[out] p_handle Pointer to a 16-bit word where the assigned handle will be stored.
+ *
+ * @note Secondary Services are only relevant in the context of the entity that references them, it is therefore forbidden to
+ * add a secondary service declaration that is not referenced by another service later in the ATT table.
+ *
+ * @return @ref NRF_SUCCESS Successfully added a service declaration.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, Vendor Specific UUIDs need to be present in the table.
+ * @return @ref NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack.
+ * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ */
+SVCALL(SD_BLE_GATTS_SERVICE_ADD, uint32_t, sd_ble_gatts_service_add(uint8_t type, ble_uuid_t const*const p_uuid, uint16_t *const p_handle));
+
+
+/**@brief Add an include declaration to the local server ATT table.
+ *
+ * @note It is currently only possible to add an include declaration to the last added service (i.e. only sequential addition is supported at this time).
+ *
+ * @note The included service must already be present in the ATT table prior to this call.
+ *
+ * @param[in] service_handle Handle of the service where the included service is to be placed, if BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially.
+ * @param[in] inc_srvc_handle Handle of the included service.
+ * @param[out] p_include_handle Pointer to a 16-bit word where the assigned handle will be stored.
+ *
+ * @return @ref NRF_SUCCESS Successfully added an include declaration.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, handle values need to match previously added services.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation.
+ * @return @ref NRF_ERROR_FORBIDDEN Forbidden value supplied, self inclusions are not allowed.
+ * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ * @return @ref NRF_ERROR_NOT_FOUND Attribute not found.
+ */
+SVCALL(SD_BLE_GATTS_INCLUDE_ADD, uint32_t, sd_ble_gatts_include_add(uint16_t service_handle, uint16_t inc_srvc_handle, uint16_t *const p_include_handle));
+
+
+/**@brief Add a characteristic declaration, a characteristic value declaration and optional characteristic descriptor declarations to the local server ATT table.
+ *
+ * @note It is currently only possible to add a characteristic to the last added service (i.e. only sequential addition is supported at this time).
+ *
+ * @note Several restrictions apply to the parameters, such as matching permissions between the user description descriptor and the writeable auxiliaries bits,
+ * readable (no security) and writeable (selectable) CCCDs and SCCDs and valid presentation format values.
+ *
+ * @note If no metadata is provided for the optional descriptors, their permissions will be derived from the characteristic permissions.
+ *
+ * @param[in] service_handle Handle of the service where the characteristic is to be placed, if BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially.
+ * @param[in] p_char_md Characteristic metadata.
+ * @param[in] p_attr_char_value Pointer to the attribute structure corresponding to the characteristic value.
+ * @param[out] p_handles Pointer to the structure where the assigned handles will be stored.
+ *
+ * @return @ref NRF_SUCCESS Successfully added a characteristic.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, service handle, Vendor Specific UUIDs, lengths, and permissions need to adhere to the constraints.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation, a service context is required.
+ * @return @ref NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack.
+ * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX.
+ */
+SVCALL(SD_BLE_GATTS_CHARACTERISTIC_ADD, uint32_t, sd_ble_gatts_characteristic_add(uint16_t service_handle, ble_gatts_char_md_t const*const p_char_md, ble_gatts_attr_t const*const p_attr_char_value, ble_gatts_char_handles_t *const p_handles));
+
+
+/**@brief Add a descriptor to the local server ATT table.
+ *
+ * @note It is currently only possible to add a descriptor to the last added characteristic (i.e. only sequential addition is supported at this time).
+ *
+ * @param[in] char_handle Handle of the characteristic where the descriptor is to be placed, if BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially.
+ * @param[in] p_attr Pointer to the attribute structure.
+ * @param[out] p_handle Pointer to a 16-bit word where the assigned handle will be stored.
+ *
+ * @return @ref NRF_SUCCESS Successfully added a descriptor.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, characteristic handle, Vendor Specific UUIDs, lengths, and permissions need to adhere to the constraints.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation, a characteristic context is required.
+ * @return @ref NRF_ERROR_FORBIDDEN Forbidden value supplied, certain UUIDs are reserved for the stack.
+ * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX.
+ */
+SVCALL(SD_BLE_GATTS_DESCRIPTOR_ADD, uint32_t, sd_ble_gatts_descriptor_add(uint16_t char_handle, ble_gatts_attr_t const * const p_attr, uint16_t* const p_handle));
+
+/**@brief Set the value of a given attribute.
+ *
+ * @param[in] handle Attribute handle.
+ * @param[in] offset Offset in bytes to write from.
+ * @param[in,out] p_len Length in bytes to be written, length in bytes written after successful return.
+ * @param[in] p_value Pointer to a buffer (at least len bytes long) containing the desired attribute value. If value is stored in user memory, only the attribute length is updated when p_value == NULL.
+ *
+ * @return @ref NRF_SUCCESS Successfully set the value of the attribute.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_NOT_FOUND Attribute not found.
+ * @return @ref NRF_ERROR_FORBIDDEN Forbidden handle supplied, certain attributes are not modifiable by the application.
+ * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, attribute lengths are restricted by @ref BLE_GATTS_ATTR_LENS_MAX.
+ */
+SVCALL(SD_BLE_GATTS_VALUE_SET, uint32_t, sd_ble_gatts_value_set(uint16_t handle, uint16_t offset, uint16_t* const p_len, uint8_t const * const p_value));
+
+/**@brief Get the value of a given attribute.
+ *
+ * @param[in] handle Attribute handle.
+ * @param[in] offset Offset in bytes to read from.
+ * @param[in,out] p_len Length in bytes to be read, total length of attribute value (in bytes, starting from offset) after successful return.
+ * @param[in,out] p_data Pointer to a buffer (at least len bytes long) where to store the attribute value. Set to NULL to obtain the complete length of attribute value.
+ *
+ * @note If the attribute value is longer than the size of the supplied buffer,
+ * p_len will return the total attribute value length (excluding offset),
+ * and not the number of bytes actually returned in p_data.
+ * The application may use this information to allocate a suitable buffer size.
+ *
+ * @return @ref NRF_SUCCESS Successfully retrieved the value of the attribute.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_NOT_FOUND Attribute not found.
+ */
+SVCALL(SD_BLE_GATTS_VALUE_GET, uint32_t, sd_ble_gatts_value_get(uint16_t handle, uint16_t offset, uint16_t *const p_len, uint8_t* const p_data));
+
+/**@brief Notify or Indicate an attribute value.
+ *
+ * @details This function checks for the relevant Client Characteristic Configuration descriptor value to verify that the relevant operation
+ * (notification or indication) has been enabled by the client. It is also able to update the attribute value before issuing the PDU, so that
+ * the application can atomically perform a value update and a server initiated transaction with a single API call.
+ * If the application chooses to indicate an attribute value, a @ref BLE_GATTS_EVT_HVC will be sent up as soon as the confirmation arrives from
+ * the peer.
+ *
+ * @note The local attribute value may be updated even if an outgoing packet is not sent to the peer due to an error during execution.
+ * When receiveing the error codes @ref NRF_ERROR_INVALID_STATE, @ref NRF_ERROR_BUSY, @ref BLE_ERROR_GATTS_SYS_ATTR_MISSING and
+ * @ref BLE_ERROR_NO_TX_BUFFERS the ATT table has been updated.
+ * The caller can check whether the value has been updated by looking at the contents of *(p_hvx_params->p_len).
+ *
+ * @note It is important to note that a notification will <b>consume an application buffer</b>, and will therefore
+ * generate a @ref BLE_EVT_TX_COMPLETE event when the packet has been transmitted. An indication on the other hand will use the
+ * standard server internal buffer and thus will only generate a @ref BLE_GATTS_EVT_HVC event as soon as the confirmation
+ * has been received from the peer. Please see the documentation of @ref sd_ble_tx_buffer_count_get for more details.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] p_hvx_params Pointer to an HVx parameters structure. If the p_data member contains a non-NULL pointer the attribute value will be updated with
+ * the contents pointed by it before sending the notification or indication.
+ *
+ * @return @ref NRF_SUCCESS Successfully queued a notification or indication for transmission, and optionally updated the attribute value.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle(s) supplied. Only attributes added directly by the application are available to notify and indicate.
+ * @return @ref BLE_ERROR_GATTS_INVALID_ATTR_TYPE Invalid attribute type(s) supplied, only characteristic values may be notified and indicated.
+ * @return @ref NRF_ERROR_NOT_FOUND Attribute not found.
+ * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation, notifications or indications must be enabled in the CCCD.
+ * @return @ref NRF_ERROR_BUSY Procedure already in progress.
+ * @return @ref BLE_ERROR_GATTS_SYS_ATTR_MISSING System attributes missing, use @ref sd_ble_gatts_sys_attr_set to set them to a known value.
+ * @return @ref BLE_ERROR_NO_TX_BUFFERS There are no available buffers to send the data, applies only to notifications.
+ */
+SVCALL(SD_BLE_GATTS_HVX, uint32_t, sd_ble_gatts_hvx(uint16_t conn_handle, ble_gatts_hvx_params_t const*const p_hvx_params));
+
+/**@brief Indicate the Service Changed attribute value.
+ *
+ * @details This call will send a Handle Value Indication to one or more peers connected to inform them that the attribute
+ * table layout has changed. As soon as the peer has confirmed the indication, a @ref BLE_GATTS_EVT_SC_CONFIRM event will
+ * be issued.
+ *
+ * @note Some of the restrictions and limitations that apply to @ref sd_ble_gatts_hvx also apply here.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] start_handle Start of affected attribute handle range.
+ * @param[in] end_handle End of affected attribute handle range.
+ *
+ * @return @ref NRF_SUCCESS Successfully queued the Service Changed indication for transmission.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle(s) supplied, handles must be in the range populated by the application.
+ * @return @ref NRF_ERROR_INVALID_STATE Invalid state to perform operation, notifications or indications must be enabled in the CCCD.
+ * @return @ref NRF_ERROR_BUSY Procedure already in progress.
+ * @return @ref BLE_ERROR_GATTS_SYS_ATTR_MISSING System attributes missing, use @ref sd_ble_gatts_sys_attr_set to set them to a known value.
+ */
+SVCALL(SD_BLE_GATTS_SERVICE_CHANGED, uint32_t, sd_ble_gatts_service_changed(uint16_t conn_handle, uint16_t start_handle, uint16_t end_handle));
+
+/**@brief Respond to a Read/Write authorization request.
+ *
+ * @note This call should only be used as a response to a @ref BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST event issued to the application.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] p_rw_authorize_reply_params Pointer to a structure with the attribute provided by the application.
+ *
+ * @return @ref NRF_SUCCESS Successfully queued a response to the peer, and in the case of a write operation, ATT table updated.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_STATE No authorization request pending.
+ * @return @ref NRF_ERROR_INVALID_PARAM Authorization op invalid,
+ * or for Read Authorization reply: requested handles not replied with,
+ * or for Write Authorization reply: handle supplied does not match requested handle.
+ */
+SVCALL(SD_BLE_GATTS_RW_AUTHORIZE_REPLY, uint32_t, sd_ble_gatts_rw_authorize_reply(uint16_t conn_handle, ble_gatts_rw_authorize_reply_params_t const*const p_rw_authorize_reply_params));
+
+
+/**@brief Update persistent system attribute information.
+ *
+ * @details Supply to the stack information about persistent system attributes.
+ * This call is legal in the connected state only, and is usually
+ * made immediately after a connection is established and the bond identified.
+ * usually as a response to a BLE_GATTS_EVT_SYS_ATTR_MISSING.
+ *
+ * p_sysattrs may point directly to the application's stored copy of the struct.
+ * If the pointer is NULL, the system attribute info is initialized, assuming that
+ * the application does not have any previously saved data for this bond.
+ *
+ * @note The state of persistent system attributes is reset upon connection and then remembered for its duration.
+ *
+ * @note If this call returns with an error code different from @ref NRF_SUCCESS, the storage of persistent system attributes may have been completed only partially.
+ * This means that the state of the attribute table is undefined, and the application should either provide a new set of attributes using this same call or
+ * reset the SoftDevice to return to a known state.
+ *
+ * @param[in] conn_handle Connection handle.
+ * @param[in] p_sys_attr_data Pointer to a saved copy of system attributes supplied to the stack, or NULL.
+ * @param[in] len Size of data pointed by p_sys_attr_data, in octets.
+ *
+ * @return @ref NRF_SUCCESS Successfully set the system attribute information.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_DATA Invalid data supplied, the data should be exactly the same as retrieved with @ref sd_ble_gatts_sys_attr_get.
+ * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ */
+SVCALL(SD_BLE_GATTS_SYS_ATTR_SET, uint32_t, sd_ble_gatts_sys_attr_set(uint16_t conn_handle, uint8_t const*const p_sys_attr_data, uint16_t len));
+
+
+/**@brief Retrieve persistent system attribute information from the stack.
+ *
+ * @details This call is used to retrieve information about values to be stored perisistently by the application
+ * after a connection has been terminated. When a new connection is made to the same bond, the values
+ * should be restored using @ref sd_ble_gatts_sys_attr_set.
+ * The data should be read before any new advertising is started, or any new connection established. The connection handle for
+ * the previous now defunct connection will remain valid until a new one is created to allow this API call to refer to it.
+ *
+ * @param[in] conn_handle Connection handle of the recently terminated connection.
+ * @param[in] p_sys_attr_data Pointer to a buffer where updated information about system attributes will be filled in. NULL can be provided to
+ * obtain the length of the data
+ * @param[in,out] p_len Size of application buffer if p_sys_attr_data is not NULL. Unconditially updated to actual length of system attribute data.
+ *
+ * @return @ref NRF_SUCCESS Successfully retrieved the system attribute information.
+ * @return @ref BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_DATA_SIZE The system attribute information did not fit into the provided buffer.
+ */
+SVCALL(SD_BLE_GATTS_SYS_ATTR_GET, uint32_t, sd_ble_gatts_sys_attr_get(uint16_t conn_handle, uint8_t * const p_sys_attr_data, uint16_t* const p_len));
+
+/** @} */
+
+#endif // BLE_GATTS_H__
+
+/**
+ @}
+*/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/s110_nrf51822_7_1_0/s110_nrf51822_7.1.0_API/include/ble_hci.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,96 @@
+/*
+ Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+
+ The information contained herein is confidential property of Nordic Semiconductor. The use,
+ copying, transfer or disclosure of such information is prohibited except by express written
+ agreement with Nordic Semiconductor.
+ */
+/**
+ @addtogroup BLE_COMMON
+ @{
+*/
+
+
+#ifndef BLE_HCI_H__
+#define BLE_HCI_H__
+
+/** @defgroup BLE_HCI_STATUS_CODES Bluetooth status codes
+ * @{ */
+
+#define BLE_HCI_STATUS_CODE_SUCCESS 0x00
+#define BLE_HCI_STATUS_CODE_UNKNOWN_BTLE_COMMAND 0x01
+#define BLE_HCI_STATUS_CODE_UNKNOWN_CONNECTION_IDENTIFIER 0x02
+/*0x03 Hardware Failure
+0x04 Page Timeout
+*/
+#define BLE_HCI_AUTHENTICATION_FAILURE 0x05
+#define BLE_HCI_STATUS_CODE_PIN_OR_KEY_MISSING 0x06
+#define BLE_HCI_MEMORY_CAPACITY_EXCEEDED 0x07
+#define BLE_HCI_CONNECTION_TIMEOUT 0x08
+/*0x09 Connection Limit Exceeded
+0x0A Synchronous Connection Limit To A Device Exceeded
+0x0B ACL Connection Already Exists*/
+#define BLE_HCI_STATUS_CODE_COMMAND_DISALLOWED 0x0C
+/*0x0D Connection Rejected due to Limited Resources
+0x0E Connection Rejected Due To Security Reasons
+0x0F Connection Rejected due to Unacceptable BD_ADDR
+0x10 Connection Accept Timeout Exceeded
+0x11 Unsupported Feature or Parameter Value*/
+#define BLE_HCI_STATUS_CODE_INVALID_BTLE_COMMAND_PARAMETERS 0x12
+#define BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION 0x13
+#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES 0x14
+#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF 0x15
+#define BLE_HCI_LOCAL_HOST_TERMINATED_CONNECTION 0x16
+/*
+0x17 Repeated Attempts
+0x18 Pairing Not Allowed
+0x19 Unknown LMP PDU
+*/
+#define BLE_HCI_UNSUPPORTED_REMOTE_FEATURE 0x1A
+/*
+0x1B SCO Offset Rejected
+0x1C SCO Interval Rejected
+0x1D SCO Air Mode Rejected*/
+#define BLE_HCI_STATUS_CODE_INVALID_LMP_PARAMETERS 0x1E
+#define BLE_HCI_STATUS_CODE_UNSPECIFIED_ERROR 0x1F
+/*0x20 Unsupported LMP Parameter Value
+0x21 Role Change Not Allowed
+*/
+#define BLE_HCI_STATUS_CODE_LMP_RESPONSE_TIMEOUT 0x22
+/*0x23 LMP Error Transaction Collision*/
+#define BLE_HCI_STATUS_CODE_LMP_PDU_NOT_ALLOWED 0x24
+/*0x25 Encryption Mode Not Acceptable
+0x26 Link Key Can Not be Changed
+0x27 Requested QoS Not Supported
+*/
+#define BLE_HCI_INSTANT_PASSED 0x28
+#define BLE_HCI_PAIRING_WITH_UNIT_KEY_UNSUPPORTED 0x29
+#define BLE_HCI_DIFFERENT_TRANSACTION_COLLISION 0x2A
+/*
+0x2B Reserved
+0x2C QoS Unacceptable Parameter
+0x2D QoS Rejected
+0x2E Channel Classification Not Supported
+0x2F Insufficient Security
+0x30 Parameter Out Of Mandatory Range
+0x31 Reserved
+0x32 Role Switch Pending
+0x33 Reserved
+0x34 Reserved Slot Violation
+0x35 Role Switch Failed
+0x36 Extended Inquiry Response Too Large
+0x37 Secure Simple Pairing Not Supported By Host.
+0x38 Host Busy - Pairing
+0x39 Connection Rejected due to No Suitable Channel Found*/
+#define BLE_HCI_CONTROLLER_BUSY 0x3A
+#define BLE_HCI_CONN_INTERVAL_UNACCEPTABLE 0x3B
+#define BLE_HCI_DIRECTED_ADVERTISER_TIMEOUT 0x3C
+#define BLE_HCI_CONN_TERMINATED_DUE_TO_MIC_FAILURE 0x3D
+#define BLE_HCI_CONN_FAILED_TO_BE_ESTABLISHED 0x3E
+
+/** @} */
+
+
+#endif // BLE_HCI_H__
+
+/** @} */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/s110_nrf51822_7_1_0/s110_nrf51822_7.1.0_API/include/ble_l2cap.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,144 @@
+/* Copyright (c) 2011 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+/**
+ @addtogroup BLE_L2CAP Logical Link Control and Adaptation Protocol (L2CAP)
+ @{
+ @brief Definitions and prototypes for the L2CAP interface.
+ */
+
+#ifndef BLE_L2CAP_H__
+#define BLE_L2CAP_H__
+
+#include "ble_types.h"
+#include "ble_ranges.h"
+#include "ble_err.h"
+#include "nrf_svc.h"
+
+/**@addtogroup BLE_L2CAP_ENUMERATIONS Enumerations
+ * @{ */
+
+/**@brief L2CAP API SVC numbers. */
+enum BLE_L2CAP_SVCS
+{
+ SD_BLE_L2CAP_CID_REGISTER = BLE_L2CAP_SVC_BASE, /**< Register a CID. */
+ SD_BLE_L2CAP_CID_UNREGISTER, /**< Unregister a CID. */
+ SD_BLE_L2CAP_TX /**< Transmit a packet. */
+};
+
+/** @} */
+
+/**@addtogroup BLE_L2CAP_DEFINES Defines
+ * @{ */
+
+/**@defgroup BLE_ERRORS_L2CAP SVC return values specific to L2CAP
+ * @{ */
+#define BLE_ERROR_L2CAP_CID_IN_USE (NRF_L2CAP_ERR_BASE + 0x000) /**< CID already in use. */
+/** @} */
+
+/**@brief Default L2CAP MTU. */
+#define BLE_L2CAP_MTU_DEF (23)
+
+/**@brief Invalid Channel Identifier. */
+#define BLE_L2CAP_CID_INVALID (0x0000)
+
+/**@brief Dynamic Channel Identifier base. */
+#define BLE_L2CAP_CID_DYN_BASE (0x0040)
+
+/**@brief Maximum amount of dynamic CIDs. */
+#define BLE_L2CAP_CID_DYN_MAX (8)
+
+/** @} */
+
+/**@addtogroup BLE_L2CAP_STRUCTURES Structures
+ * @{ */
+
+/**@brief Packet header format for L2CAP transmission. */
+typedef struct
+{
+ uint16_t len; /**< Length of valid info in data member. */
+ uint16_t cid; /**< Channel ID on which packet is transmitted. */
+} ble_l2cap_header_t;
+
+/**@brief L2CAP Event IDs. */
+enum BLE_L2CAP_EVTS
+{
+ BLE_L2CAP_EVT_RX = BLE_L2CAP_EVT_BASE /**< L2CAP packet received. */
+};
+
+
+/**@brief L2CAP Received packet event report. */
+typedef struct
+{
+ ble_l2cap_header_t header; /** L2CAP packet header. */
+ uint8_t data[1]; /**< Packet data, variable length. */
+} ble_l2cap_evt_rx_t;
+
+
+/**@brief L2CAP event callback event structure. */
+typedef struct
+{
+ uint16_t conn_handle; /**< Connection Handle on which event occured. */
+ union
+ {
+ ble_l2cap_evt_rx_t rx; /**< RX Event parameters. */
+ } params;
+} ble_l2cap_evt_t;
+
+
+/**@brief Register a CID with L2CAP.
+ *
+ * @details This registers a higher protocol layer with the L2CAP multiplexer, and is requried prior to all operations on the CID.
+ *
+ * @param[in] cid L2CAP CID.
+ *
+ * @return @ref NRF_SUCCESS Successfully registered a CID with the L2CAP layer.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, CID must be above @ref BLE_L2CAP_CID_DYN_BASE.
+ * @return @ref BLE_ERROR_L2CAP_CID_IN_USE L2CAP CID already in use.
+ * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ */
+SVCALL(SD_BLE_L2CAP_CID_REGISTER, uint32_t, sd_ble_l2cap_cid_register(uint16_t cid));
+
+/**@brief Unregister a CID with L2CAP.
+ *
+ * @details This unregisters a previously registerd higher protocol layer with the L2CAP multiplexer.
+ *
+ * @param[in] cid L2CAP CID.
+ *
+ * @return @ref NRF_SUCCESS Successfully unregistered the CID.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.
+ * @return @ref NRF_ERROR_NOT_FOUND CID not previously registered.
+ */
+SVCALL(SD_BLE_L2CAP_CID_UNREGISTER, uint32_t, sd_ble_l2cap_cid_unregister(uint16_t cid));
+
+/**@brief Transmit an L2CAP packet.
+ *
+ * @note It is important to note that a call to this function will <b>consume an application buffer</b>, and will therefore
+ * generate a @ref BLE_EVT_TX_COMPLETE event when the packet has been transmitted.
+ * Please see the documentation of @ref sd_ble_tx_buffer_count_get for more details.
+ *
+ * @param[in] conn_handle Connection Handle.
+ * @param[in] p_header Pointer to a packet header containing length and CID.
+ * @param[in] p_data Pointer to the data to be transmitted.
+ *
+ * @return @ref NRF_SUCCESS Successfully queued an L2CAP packet for transmission.
+ * @return @ref NRF_ERROR_INVALID_ADDR Invalid pointer supplied.
+ * @return @ref NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied, CIDs must be registered beforehand with @ref sd_ble_l2cap_cid_register.
+ * @return @ref NRF_ERROR_NOT_FOUND CID not found.
+ * @return @ref NRF_ERROR_NO_MEM Not enough memory to complete operation.
+ * @return @ref BLE_ERROR_NO_TX_BUFFERS Not enough application buffers available.
+ * @return @ref NRF_ERROR_DATA_SIZE Invalid data size(s) supplied, see @ref BLE_L2CAP_MTU_DEF.
+ */
+SVCALL(SD_BLE_L2CAP_TX, uint32_t, sd_ble_l2cap_tx(uint16_t conn_handle, ble_l2cap_header_t const * const p_header, uint8_t const * const p_data));
+
+/** @} */
+
+#endif // BLE_L2CAP_H__
+
+/**
+ @}
+*/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/s110_nrf51822_7_1_0/s110_nrf51822_7.1.0_API/include/ble_ranges.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,89 @@
+/*
+ Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+
+ The information contained herein is confidential property of Nordic Semiconductor. The use,
+ copying, transfer or disclosure of such information is prohibited except by express written
+ agreement with Nordic Semiconductor.
+ */
+/**
+ @addtogroup BLE_COMMON
+ @{
+ @defgroup ble_ranges Module specific SVC and event number subranges
+ @{
+
+ @brief Definition of SVC and event number subranges for each API module.
+
+ @note
+ SVCs and event numbers are split into subranges for each API module.
+ Each module receives its entire allocated range of SVC calls, whether implemented or not,
+ but return BLE_ERROR_NOT_SUPPORTED for unimplemented or undefined calls in its range.
+
+ Note that the symbols BLE_<module>_SVC_LAST is the end of the allocated SVC range,
+ rather than the last SVC function call actually defined and implemented.
+
+ Specific SVC and event values are defined in each module's ble_<module>.h file,
+ which defines names of each individual SVC code based on the range start value.
+*/
+
+#ifndef BLE_RANGES_H__
+#define BLE_RANGES_H__
+
+#define BLE_SVC_BASE 0x60
+#define BLE_SVC_LAST 0x6B /* Total: 12. */
+
+#define BLE_RESERVED_SVC_BASE 0x6C
+#define BLE_RESERVED_SVC_LAST 0x6F /* Total: 4. */
+
+#define BLE_GAP_SVC_BASE 0x70
+#define BLE_GAP_SVC_LAST 0x8F /* Total: 32. */
+
+#define BLE_GATTC_SVC_BASE 0x90
+#define BLE_GATTC_SVC_LAST 0x9F /* Total: 16. */
+
+#define BLE_GATTS_SVC_BASE 0xA0
+#define BLE_GATTS_SVC_LAST 0xAF /* Total: 16. */
+
+#define BLE_L2CAP_SVC_BASE 0xB0
+#define BLE_L2CAP_SVC_LAST 0xBF /* Total: 16. */
+
+
+#define BLE_EVT_INVALID 0x00
+
+#define BLE_EVT_BASE 0x01
+#define BLE_EVT_LAST 0x0F /* Total: 15. */
+
+#define BLE_GAP_EVT_BASE 0x10
+#define BLE_GAP_EVT_LAST 0x2F /* Total: 32. */
+
+#define BLE_GATTC_EVT_BASE 0x30
+#define BLE_GATTC_EVT_LAST 0x4F /* Total: 32. */
+
+#define BLE_GATTS_EVT_BASE 0x50
+#define BLE_GATTS_EVT_LAST 0x6F /* Total: 32. */
+
+#define BLE_L2CAP_EVT_BASE 0x70
+#define BLE_L2CAP_EVT_LAST 0x8F /* Total: 32. */
+
+#define BLE_OPT_INVALID 0x00 /**< Invalid BLE Option. */
+
+#define BLE_OPT_BASE 0x01 /**< Common BLE Option base. */
+#define BLE_OPT_LAST 0x1F /**< Total: 31. */
+
+#define BLE_GAP_OPT_BASE 0x20 /**< GAP BLE Option base. */
+#define BLE_GAP_OPT_LAST 0x3F /**< Total: 32. */
+
+#define BLE_GATTC_OPT_BASE 0x40 /**< GATTC BLE Option base. */
+#define BLE_GATTC_OPT_LAST 0x5F /**< Total: 32. */
+
+#define BLE_GATTS_OPT_BASE 0x60 /**< GATTS BLE Option base. */
+#define BLE_GATTS_OPT_LAST 0x7F /**< Total: 32. */
+
+#define BLE_L2CAP_OPT_BASE 0x80 /**< L2CAP BLE Option base. */
+#define BLE_L2CAP_OPT_LAST 0x9F /**< Total: 32. */
+
+#endif /* BLE_RANGES_H__ */
+
+/**
+ @}
+ @}
+*/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/s110_nrf51822_7_1_0/s110_nrf51822_7.1.0_API/include/ble_types.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,169 @@
+/* Copyright (c) 2011 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+/**
+ @addtogroup BLE_COMMON
+ @{
+ @defgroup ble_types Common types and macro definitions
+ @{
+
+ @brief Common types and macro definitions for the S110 SoftDevice.
+ */
+
+#ifndef BLE_TYPES_H__
+#define BLE_TYPES_H__
+
+#include <stdint.h>
+
+/** @addtogroup BLE_COMMON_DEFINES Defines
+ * @{ */
+
+/** @defgroup BLE_CONN_HANDLES BLE Connection Handles
+ * @{ */
+#define BLE_CONN_HANDLE_INVALID 0xFFFF /**< Invalid Connection Handle. */
+#define BLE_CONN_HANDLE_ALL 0xFFFE /**< Applies to all Connection Handles. */
+/** @} */
+
+
+/** @defgroup BLE_UUID_VALUES Assigned Values for BLE UUIDs
+ * @{ */
+/* Generic UUIDs, applicable to all services */
+#define BLE_UUID_UNKNOWN 0x0000 /**< Reserved UUID. */
+#define BLE_UUID_SERVICE_PRIMARY 0x2800 /**< Primary Service. */
+#define BLE_UUID_SERVICE_SECONDARY 0x2801 /**< Secondary Service. */
+#define BLE_UUID_SERVICE_INCLUDE 0x2802 /**< Include. */
+#define BLE_UUID_CHARACTERISTIC 0x2803 /**< Characteristic. */
+#define BLE_UUID_DESCRIPTOR_CHAR_EXT_PROP 0x2900 /**< Characteristic Extended Properties Descriptor. */
+#define BLE_UUID_DESCRIPTOR_CHAR_USER_DESC 0x2901 /**< Characteristic User Description Descriptor. */
+#define BLE_UUID_DESCRIPTOR_CLIENT_CHAR_CONFIG 0x2902 /**< Client Characteristic Configuration Descriptor. */
+#define BLE_UUID_DESCRIPTOR_SERVER_CHAR_CONFIG 0x2903 /**< Server Characteristic Configuration Descriptor. */
+#define BLE_UUID_DESCRIPTOR_CHAR_PRESENTATION_FORMAT 0x2904 /**< Characteristic Presentation Format Descriptor. */
+#define BLE_UUID_DESCRIPTOR_CHAR_AGGREGATE_FORMAT 0x2905 /**< Characteristic Aggregate Format Descriptor. */
+/* GATT specific UUIDs */
+#define BLE_UUID_GATT 0x1801 /**< Generic Attribute Profile. */
+#define BLE_UUID_GATT_CHARACTERISTIC_SERVICE_CHANGED 0x2A05 /**< Service Changed Characteristic. */
+/* GAP specific UUIDs */
+#define BLE_UUID_GAP 0x1800 /**< Generic Access Profile. */
+#define BLE_UUID_GAP_CHARACTERISTIC_DEVICE_NAME 0x2A00 /**< Device Name Characteristic. */
+#define BLE_UUID_GAP_CHARACTERISTIC_APPEARANCE 0x2A01 /**< Appearance Characteristic. */
+#define BLE_UUID_GAP_CHARACTERISTIC_PPF 0x2A02 /**< Peripheral Privacy Flag Characteristic. */
+#define BLE_UUID_GAP_CHARACTERISTIC_RECONN_ADDR 0x2A03 /**< Reconnection Address Characteristic. */
+#define BLE_UUID_GAP_CHARACTERISTIC_PPCP 0x2A04 /**< Peripheral Preferred Connection Parameters Characteristic. */
+/** @} */
+
+
+/** @defgroup BLE_UUID_TYPES Types of UUID
+ * @{ */
+#define BLE_UUID_TYPE_UNKNOWN 0x00 /**< Invalid UUID type. */
+#define BLE_UUID_TYPE_BLE 0x01 /**< Bluetooth SIG UUID (16-bit). */
+#define BLE_UUID_TYPE_VENDOR_BEGIN 0x02 /**< Vendor UUID types start at this index (128-bit). */
+/** @} */
+
+
+/** @defgroup BLE_APPEARANCES Bluetooth Appearance values
+ * @note Retrieved from http://developer.bluetooth.org/gatt/characteristics/Pages/CharacteristicViewer.aspx?u=org.bluetooth.characteristic.gap.appearance.xml
+ * @{ */
+#define BLE_APPEARANCE_UNKNOWN 0 /**< Unknown. */
+#define BLE_APPEARANCE_GENERIC_PHONE 64 /**< Generic Phone. */
+#define BLE_APPEARANCE_GENERIC_COMPUTER 128 /**< Generic Computer. */
+#define BLE_APPEARANCE_GENERIC_WATCH 192 /**< Generic Watch. */
+#define BLE_APPEARANCE_WATCH_SPORTS_WATCH 193 /**< Watch: Sports Watch. */
+#define BLE_APPEARANCE_GENERIC_CLOCK 256 /**< Generic Clock. */
+#define BLE_APPEARANCE_GENERIC_DISPLAY 320 /**< Generic Display. */
+#define BLE_APPEARANCE_GENERIC_REMOTE_CONTROL 384 /**< Generic Remote Control. */
+#define BLE_APPEARANCE_GENERIC_EYE_GLASSES 448 /**< Generic Eye-glasses. */
+#define BLE_APPEARANCE_GENERIC_TAG 512 /**< Generic Tag. */
+#define BLE_APPEARANCE_GENERIC_KEYRING 576 /**< Generic Keyring. */
+#define BLE_APPEARANCE_GENERIC_MEDIA_PLAYER 640 /**< Generic Media Player. */
+#define BLE_APPEARANCE_GENERIC_BARCODE_SCANNER 704 /**< Generic Barcode Scanner. */
+#define BLE_APPEARANCE_GENERIC_THERMOMETER 768 /**< Generic Thermometer. */
+#define BLE_APPEARANCE_THERMOMETER_EAR 769 /**< Thermometer: Ear. */
+#define BLE_APPEARANCE_GENERIC_HEART_RATE_SENSOR 832 /**< Generic Heart rate Sensor. */
+#define BLE_APPEARANCE_HEART_RATE_SENSOR_HEART_RATE_BELT 833 /**< Heart Rate Sensor: Heart Rate Belt. */
+#define BLE_APPEARANCE_GENERIC_BLOOD_PRESSURE 896 /**< Generic Blood Pressure. */
+#define BLE_APPEARANCE_BLOOD_PRESSURE_ARM 897 /**< Blood Pressure: Arm. */
+#define BLE_APPEARANCE_BLOOD_PRESSURE_WRIST 898 /**< Blood Pressure: Wrist. */
+#define BLE_APPEARANCE_GENERIC_HID 960 /**< Human Interface Device (HID). */
+#define BLE_APPEARANCE_HID_KEYBOARD 961 /**< Keyboard (HID Subtype). */
+#define BLE_APPEARANCE_HID_MOUSE 962 /**< Mouse (HID Subtype). */
+#define BLE_APPEARANCE_HID_JOYSTICK 963 /**< Joystiq (HID Subtype). */
+#define BLE_APPEARANCE_HID_GAMEPAD 964 /**< Gamepad (HID Subtype). */
+#define BLE_APPEARANCE_HID_DIGITIZERSUBTYPE 965 /**< Digitizer Tablet (HID Subtype). */
+#define BLE_APPEARANCE_HID_CARD_READER 966 /**< Card Reader (HID Subtype). */
+#define BLE_APPEARANCE_HID_DIGITAL_PEN 967 /**< Digital Pen (HID Subtype). */
+#define BLE_APPEARANCE_HID_BARCODE 968 /**< Barcode Scanner (HID Subtype). */
+#define BLE_APPEARANCE_GENERIC_GLUCOSE_METER 1024 /**< Generic Glucose Meter. */
+#define BLE_APPEARANCE_GENERIC_RUNNING_WALKING_SENSOR 1088 /**< Generic Running Walking Sensor. */
+#define BLE_APPEARANCE_RUNNING_WALKING_SENSOR_IN_SHOE 1089 /**< Running Walking Sensor: In-Shoe. */
+#define BLE_APPEARANCE_RUNNING_WALKING_SENSOR_ON_SHOE 1090 /**< Running Walking Sensor: On-Shoe. */
+#define BLE_APPEARANCE_RUNNING_WALKING_SENSOR_ON_HIP 1091 /**< Running Walking Sensor: On-Hip. */
+#define BLE_APPEARANCE_GENERIC_CYCLING 1152 /**< Generic Cycling. */
+#define BLE_APPEARANCE_CYCLING_CYCLING_COMPUTER 1153 /**< Cycling: Cycling Computer. */
+#define BLE_APPEARANCE_CYCLING_SPEED_SENSOR 1154 /**< Cycling: Speed Sensor. */
+#define BLE_APPEARANCE_CYCLING_CADENCE_SENSOR 1155 /**< Cycling: Cadence Sensor. */
+#define BLE_APPEARANCE_CYCLING_POWER_SENSOR 1156 /**< Cycling: Power Sensor. */
+#define BLE_APPEARANCE_CYCLING_SPEED_CADENCE_SENSOR 1157 /**< Cycling: Speed and Cadence Sensor. */
+#define BLE_APPEARANCE_GENERIC_PULSE_OXIMETER 3136 /**< Generic Pulse Oximeter. */
+#define BLE_APPEARANCE_PULSE_OXIMETER_FINGERTIP 3137 /**< Fingertip (Pulse Oximeter subtype). */
+#define BLE_APPEARANCE_PULSE_OXIMETER_WRIST_WORN 3138 /**< Wrist Worn(Pulse Oximeter subtype). */
+#define BLE_APPEARANCE_GENERIC_WEIGHT_SCALE 3200 /**< Generic Weight Scale. */
+#define BLE_APPEARANCE_GENERIC_OUTDOOR_SPORTS_ACT 5184 /**< Generic Outdoor Sports Activity. */
+#define BLE_APPEARANCE_OUTDOOR_SPORTS_ACT_LOC_DISP 5185 /**< Location Display Device (Outdoor Sports Activity subtype). */
+#define BLE_APPEARANCE_OUTDOOR_SPORTS_ACT_LOC_AND_NAV_DISP 5186 /**< Location and Navigation Display Device (Outdoor Sports Activity subtype). */
+#define BLE_APPEARANCE_OUTDOOR_SPORTS_ACT_LOC_POD 5187 /**< Location Pod (Outdoor Sports Activity subtype). */
+#define BLE_APPEARANCE_OUTDOOR_SPORTS_ACT_LOC_AND_NAV_POD 5188 /**< Location and Navigation Pod (Outdoor Sports Activity subtype). */
+/** @} */
+
+/** @brief Set .type and .uuid fields of ble_uuid_struct to specified uuid value. */
+#define BLE_UUID_BLE_ASSIGN(instance, value) do {\
+ instance.type = BLE_UUID_TYPE_BLE; \
+ instance.uuid = value;} while(0)
+
+/** @brief Copy type and uuid members from src to dst ble_uuid_t pointer. Both pointers must be valid/non-null. */
+#define BLE_UUID_COPY_PTR(dst, src) do {\
+ (dst)->type = (src)->type; \
+ (dst)->uuid = (src)->uuid;} while(0)
+
+/** @brief Copy type and uuid members from src to dst ble_uuid_t struct. */
+#define BLE_UUID_COPY_INST(dst, src) do {\
+ (dst).type = (src).type; \
+ (dst).uuid = (src).uuid;} while(0)
+
+/** @brief Compare for equality both type and uuid members of two (valid, non-null) ble_uuid_t pointers. */
+#define BLE_UUID_EQ(p_uuid1, p_uuid2) \
+ (((p_uuid1)->type == (p_uuid2)->type) && ((p_uuid1)->uuid == (p_uuid2)->uuid))
+
+/** @brief Compare for difference both type and uuid members of two (valid, non-null) ble_uuid_t pointers. */
+#define BLE_UUID_NEQ(p_uuid1, p_uuid2) \
+ (((p_uuid1)->type != (p_uuid2)->type) || ((p_uuid1)->uuid != (p_uuid2)->uuid))
+
+/** @} */
+
+/** @addtogroup BLE_TYPES_STRUCTURES Structures
+ * @{ */
+
+/** @brief 128 bit UUID values. */
+typedef struct
+{
+ unsigned char uuid128[16];
+} ble_uuid128_t;
+
+/** @brief Bluetooth Low Energy UUID type, encapsulates both 16-bit and 128-bit UUIDs. */
+typedef struct
+{
+ uint16_t uuid; /**< 16-bit UUID value or octets 12-13 of 128-bit UUID. */
+ uint8_t type; /**< UUID type, see @ref BLE_UUID_TYPES. If type is BLE_UUID_TYPE_UNKNOWN, the value of uuid is undefined. */
+} ble_uuid_t;
+
+/** @} */
+
+#endif /* BLE_TYPES_H__ */
+
+/**
+ @}
+ @}
+*/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/s110_nrf51822_7_1_0/s110_nrf51822_7.1.0_API/include/nrf_error.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,51 @@
+/*
+ * Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+ /**
+ @defgroup nrf_error SoftDevice Global Error Codes
+ @{
+
+ @brief Global Error definitions
+*/
+
+/* Header guard */
+#ifndef NRF_ERROR_H__
+#define NRF_ERROR_H__
+
+/** @defgroup NRF_ERRORS_BASE Error Codes Base number definitions
+ * @{ */
+#define NRF_ERROR_BASE_NUM (0x0) ///< Global error base
+#define NRF_ERROR_SDM_BASE_NUM (0x1000) ///< SDM error base
+#define NRF_ERROR_SOC_BASE_NUM (0x2000) ///< SoC error base
+#define NRF_ERROR_STK_BASE_NUM (0x3000) ///< STK error base
+/** @} */
+
+#define NRF_SUCCESS (NRF_ERROR_BASE_NUM + 0) ///< Successful command
+#define NRF_ERROR_SVC_HANDLER_MISSING (NRF_ERROR_BASE_NUM + 1) ///< SVC handler is missing
+#define NRF_ERROR_SOFTDEVICE_NOT_ENABLED (NRF_ERROR_BASE_NUM + 2) ///< SoftDevice has not been enabled
+#define NRF_ERROR_INTERNAL (NRF_ERROR_BASE_NUM + 3) ///< Internal Error
+#define NRF_ERROR_NO_MEM (NRF_ERROR_BASE_NUM + 4) ///< No Memory for operation
+#define NRF_ERROR_NOT_FOUND (NRF_ERROR_BASE_NUM + 5) ///< Not found
+#define NRF_ERROR_NOT_SUPPORTED (NRF_ERROR_BASE_NUM + 6) ///< Not supported
+#define NRF_ERROR_INVALID_PARAM (NRF_ERROR_BASE_NUM + 7) ///< Invalid Parameter
+#define NRF_ERROR_INVALID_STATE (NRF_ERROR_BASE_NUM + 8) ///< Invalid state, operation disallowed in this state
+#define NRF_ERROR_INVALID_LENGTH (NRF_ERROR_BASE_NUM + 9) ///< Invalid Length
+#define NRF_ERROR_INVALID_FLAGS (NRF_ERROR_BASE_NUM + 10) ///< Invalid Flags
+#define NRF_ERROR_INVALID_DATA (NRF_ERROR_BASE_NUM + 11) ///< Invalid Data
+#define NRF_ERROR_DATA_SIZE (NRF_ERROR_BASE_NUM + 12) ///< Data size exceeds limit
+#define NRF_ERROR_TIMEOUT (NRF_ERROR_BASE_NUM + 13) ///< Operation timed out
+#define NRF_ERROR_NULL (NRF_ERROR_BASE_NUM + 14) ///< Null Pointer
+#define NRF_ERROR_FORBIDDEN (NRF_ERROR_BASE_NUM + 15) ///< Forbidden Operation
+#define NRF_ERROR_INVALID_ADDR (NRF_ERROR_BASE_NUM + 16) ///< Bad Memory Address
+#define NRF_ERROR_BUSY (NRF_ERROR_BASE_NUM + 17) ///< Busy
+
+#endif // NRF_ERROR_H__
+
+/**
+ @}
+*/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/s110_nrf51822_7_1_0/s110_nrf51822_7.1.0_API/include/nrf_error_sdm.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,33 @@
+/*
+ * Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+ /**
+ @addtogroup nrf_sdm_api
+ @{
+ @defgroup nrf_sdm_error SoftDevice Manager Error Codes
+ @{
+
+ @brief Error definitions for the SDM API
+*/
+
+/* Header guard */
+#ifndef NRF_ERROR_SDM_H__
+#define NRF_ERROR_SDM_H__
+
+#include "nrf_error.h"
+
+#define NRF_ERROR_SDM_LFCLK_SOURCE_UNKNOWN (NRF_ERROR_SDM_BASE_NUM + 0) ///< Unknown lfclk source
+#define NRF_ERROR_SDM_INCORRECT_INTERRUPT_CONFIGURATION (NRF_ERROR_SDM_BASE_NUM + 1) ///< Incorrect interrupt configuration (can be caused by using illegal priority levels, or having enabled SoftDevice interrupts)
+#define NRF_ERROR_SDM_INCORRECT_CLENR0 (NRF_ERROR_SDM_BASE_NUM + 2) ///< Incorrect CLENR0 (can be caused by erronous SoftDevice flashing)
+
+#endif // NRF_ERROR_SDM_H__
+
+/**
+ @}
+ @}
+*/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/s110_nrf51822_7_1_0/s110_nrf51822_7.1.0_API/include/nrf_error_soc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,49 @@
+/*
+ * Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+ /**
+ @addtogroup nrf_soc_api
+ @{
+ @defgroup nrf_soc_error SoC Library Error Codes
+ @{
+
+ @brief Error definitions for the SoC library
+
+*/
+
+/* Header guard */
+#ifndef NRF_ERROR_SOC_H__
+#define NRF_ERROR_SOC_H__
+
+#include "nrf_error.h"
+
+/* Mutex Errors */
+#define NRF_ERROR_SOC_MUTEX_ALREADY_TAKEN (NRF_ERROR_SOC_BASE_NUM + 0) ///< Mutex already taken
+
+/* NVIC errors */
+#define NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE (NRF_ERROR_SOC_BASE_NUM + 1) ///< NVIC interrupt not available
+#define NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED (NRF_ERROR_SOC_BASE_NUM + 2) ///< NVIC interrupt priority not allowed
+#define NRF_ERROR_SOC_NVIC_SHOULD_NOT_RETURN (NRF_ERROR_SOC_BASE_NUM + 3) ///< NVIC should not return
+
+/* Power errors */
+#define NRF_ERROR_SOC_POWER_MODE_UNKNOWN (NRF_ERROR_SOC_BASE_NUM + 4) ///< Power mode unknown
+#define NRF_ERROR_SOC_POWER_POF_THRESHOLD_UNKNOWN (NRF_ERROR_SOC_BASE_NUM + 5) ///< Power POF threshold unknown
+#define NRF_ERROR_SOC_POWER_OFF_SHOULD_NOT_RETURN (NRF_ERROR_SOC_BASE_NUM + 6) ///< Power off should not return
+
+/* Rand errors */
+#define NRF_ERROR_SOC_RAND_NOT_ENOUGH_VALUES (NRF_ERROR_SOC_BASE_NUM + 7) ///< RAND not enough values
+
+/* PPI errors */
+#define NRF_ERROR_SOC_PPI_INVALID_CHANNEL (NRF_ERROR_SOC_BASE_NUM + 8) ///< Invalid PPI Channel
+#define NRF_ERROR_SOC_PPI_INVALID_GROUP (NRF_ERROR_SOC_BASE_NUM + 9) ///< Invalid PPI Group
+
+#endif // NRF_ERROR_SOC_H__
+/**
+ @}
+ @}
+*/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/s110_nrf51822_7_1_0/s110_nrf51822_7.1.0_API/include/nrf_mbr.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,155 @@
+/*
+ * Copyright (c) 2014 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+/**
+ @defgroup nrf_mbr_api Master Boot Record API
+ @{
+
+ @brief APIs for updating SoftDevice and BootLoader
+
+*/
+
+/* Header guard */
+#ifndef NRF_MBR_H__
+#define NRF_MBR_H__
+
+#include "nrf_svc.h"
+#include <stdint.h>
+
+
+/** @addtogroup NRF_MBR_DEFINES Defines
+ * @{ */
+
+/**@brief MBR SVC Base number. */
+#define MBR_SVC_BASE 0x18
+/** @} */
+
+/** @addtogroup NRF_MBR_ENUMS Enumerations
+ * @{ */
+
+/**@brief nRF Master Boot Record API SVC numbers. */
+enum NRF_MBR_SVCS
+{
+ SD_MBR_COMMAND = MBR_SVC_BASE, /**< ::sd_mbr_command */
+};
+
+/**@brief Possible values for ::sd_mbr_command_t.command */
+enum NRF_MBR_COMMANDS
+{
+ SD_MBR_COMMAND_COPY_BL, /**< Copy a new a new BootLoader. @see sd_mbr_command_copy_bl_t */
+ SD_MBR_COMMAND_COPY_SD, /**< Copy a new SoftDevice. @see ::sd_mbr_command_copy_sd_t*/
+ SD_MBR_COMMAND_INIT_SD, /**< Init forwarding interrupts to SD, and run reset function in SD*/
+ SD_MBR_COMMAND_COMPARE, /**< This command works like memcmp. @see ::sd_mbr_command_compare_t*/
+ SD_MBR_COMMAND_VECTOR_TABLE_BASE_SET, /**< Start forwarding all exception to this address @see ::sd_mbr_command_vector_table_base_set_t*/
+};
+
+/** @} */
+
+/** @addtogroup NRF_MBR_TYPES Types
+ * @{ */
+
+/**@brief This command copies part of a new SoftDevice
+ * The destination area is erased before copying.
+ * If dst is in the middle of a flash page, that whole flash page will be erased.
+ * If (dst+len) is in the middle of a flash page, that whole flash page will be erased.
+ *
+ * The user of this function is responsible for setting the PROTENSET registers.
+ *
+ * @retval ::NRF_SUCCESS indicates that the contents of the memory blocks where copied correctly.
+ * @retval ::NRF_ERROR_INTERNAL indicates that the contents of the memory blocks where not verified correctly after copying.
+ */
+typedef struct
+{
+ uint32_t *src; /**< Pointer to the source of data to be copied.*/
+ uint32_t *dst; /**< Pointer to the destination where the content is to be copied.*/
+ uint32_t len; /**< Number of 32 bit words to copy. Must be a multiple of 256 words*/
+}sd_mbr_command_copy_sd_t;
+
+
+/**@brief This command works like memcmp, but takes the length in words.
+ *
+ * @retval ::NRF_SUCCESS indicates that the contents of both memory blocks are equal.
+ * @retval ::NRF_ERROR_NULL indicates that the contents of the memory blocks are not equal.
+ */
+typedef struct
+{
+ uint32_t *ptr1; /**< Pointer to block of memory */
+ uint32_t *ptr2; /**< Pointer to block of memory */
+ uint32_t len; /**< Number of 32 bit words to compare*/
+}sd_mbr_command_compare_t;
+
+
+/**@brief This command copies a new BootLoader.
+ * With this command, destination of BootLoader is always the address written in NRF_UICR->BOOTADDR.
+ *
+ * Destination is erased by this function.
+ * If (destination+bl_len) is in the middle of a flash page, that whole flash page will be erased.
+ *
+ * This function will use PROTENSET to protect the flash that is not intended to be written.
+ *
+ * On Success, this function will not return. It will start the new BootLoader from reset-vector as normal.
+ *
+ * @retval ::NRF_ERROR_INVALID_STATE indicates that something was wrong.
+ * @retval ::NRF_ERROR_INTERNAL indicates an internal error that should not happen.
+ * @retval ::NRF_ERROR_FORBIDDEN if NRF_UICR->BOOTADDR is not set
+ * @retval ::NRF_ERROR_INVALID_LENGTH is invalid.
+ */
+typedef struct
+{
+ uint32_t *bl_src; /**< Pointer to the source of the Bootloader to be be copied.*/
+ uint32_t bl_len; /**< Number of 32 bit words to copy for BootLoader */
+}sd_mbr_command_copy_bl_t;
+
+/**@brief Sets the base address of the interrupt vector table for interrupts forwarded from the MBR
+ *
+ * Once this function has been called, this address is where the MBR will start to forward interrupts to after a reset.
+ *
+ * To restore default forwarding thiss function should be called with @param address set to 0.
+ * The MBR will then start forwarding to interrupts to the adress in NFR_UICR->BOOTADDR or to the SoftDevice if the BOOTADDR is not set.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+typedef struct
+{
+ uint32_t address; /**< The base address of the interrupt vector table for forwarded interrupts.*/
+}sd_mbr_command_vector_table_base_set_t;
+
+typedef struct
+{
+ uint32_t command; /**< type of command to be issued see @ref NRF_MBR_COMMANDS. */
+ union
+ {
+ sd_mbr_command_copy_sd_t copy_sd; /**< Parameters for copy*/
+ sd_mbr_command_copy_bl_t copy_bl; /**< Parameters for copy SoftDevice and BootLoader*/
+ sd_mbr_command_compare_t compare; /**< Parameters for verify*/
+ sd_mbr_command_vector_table_base_set_t base_set; /**< Parameters for vector table base set.*/
+ } params;
+}sd_mbr_command_t;
+
+/** @} */
+
+/** @addtogroup NRF_MBR_FUNCTIONS Functions
+ * @{ */
+
+/**@brief Issue Master Boot Record commands
+ *
+ * Commands used when updating a SoftDevice and bootloader
+ *
+ * @param[in] param Pointer to a struct describing the command
+ *
+ *@note for retvals see ::sd_mbr_command_copy_sd_t ::sd_mbr_command_copy_bl_t ::sd_mbr_command_compare_t
+
+*/
+SVCALL(SD_MBR_COMMAND, uint32_t, sd_mbr_command(sd_mbr_command_t* param));
+
+/** @} */
+#endif // NRF_MBR_H__
+
+/**
+ @}
+*/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/s110_nrf51822_7_1_0/s110_nrf51822_7.1.0_API/include/nrf_sdm.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,167 @@
+/*
+ * Copyright (c) 2011 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+/**
+ @defgroup nrf_sdm_api SoftDevice Manager API
+ @{
+
+ @brief APIs for SoftDevice management.
+
+*/
+
+/* Header guard */
+#ifndef NRF_SDM_H__
+#define NRF_SDM_H__
+
+#include "nrf_svc.h"
+#include "nrf51.h"
+#include "nrf_soc.h"
+#include "nrf_error_sdm.h"
+
+/** @addtogroup NRF_SDM_DEFINES Defines
+ * @{ */
+
+/**@brief SoftDevice Manager SVC Base number. */
+#define SDM_SVC_BASE (0x10)
+
+/** @} */
+
+/** @addtogroup NRF_SDM_ENUMS Enumerations
+ * @{ */
+
+/**@brief nRF SoftDevice Manager API SVC numbers. */
+enum NRF_SD_SVCS
+{
+ SD_SOFTDEVICE_ENABLE = SDM_SVC_BASE, /**< ::sd_softdevice_enable */
+ SD_SOFTDEVICE_DISABLE, /**< ::sd_softdevice_disable */
+ SD_SOFTDEVICE_IS_ENABLED, /**< ::sd_softdevice_is_enabled */
+ SD_SOFTDEVICE_VECTOR_TABLE_BASE_SET, /**< ::sd_softdevice_vector_table_base_set */
+ SVC_SDM_LAST /**< Placeholder for last SDM SVC */
+};
+
+/**@brief Possible lfclk oscillator sources. */
+enum NRF_CLOCK_LFCLKSRCS
+{
+ NRF_CLOCK_LFCLKSRC_SYNTH_250_PPM, /**< LFCLK Synthesized from HFCLK. */
+ NRF_CLOCK_LFCLKSRC_XTAL_500_PPM, /**< LFCLK crystal oscillator 500 PPM accuracy. */
+ NRF_CLOCK_LFCLKSRC_XTAL_250_PPM, /**< LFCLK crystal oscillator 250 PPM accuracy. */
+ NRF_CLOCK_LFCLKSRC_XTAL_150_PPM, /**< LFCLK crystal oscillator 150 PPM accuracy. */
+ NRF_CLOCK_LFCLKSRC_XTAL_100_PPM, /**< LFCLK crystal oscillator 100 PPM accuracy. */
+ NRF_CLOCK_LFCLKSRC_XTAL_75_PPM, /**< LFCLK crystal oscillator 75 PPM accuracy. */
+ NRF_CLOCK_LFCLKSRC_XTAL_50_PPM, /**< LFCLK crystal oscillator 50 PPM accuracy. */
+ NRF_CLOCK_LFCLKSRC_XTAL_30_PPM, /**< LFCLK crystal oscillator 30 PPM accuracy. */
+ NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, /**< LFCLK crystal oscillator 20 PPM accuracy. */
+ NRF_CLOCK_LFCLKSRC_RC_250_PPM_250MS_CALIBRATION, /**< LFCLK RC oscillator, 250ms calibration interval.*/
+ NRF_CLOCK_LFCLKSRC_RC_250_PPM_500MS_CALIBRATION, /**< LFCLK RC oscillator, 500ms calibration interval.*/
+ NRF_CLOCK_LFCLKSRC_RC_250_PPM_1000MS_CALIBRATION, /**< LFCLK RC oscillator, 1000ms calibration interval.*/
+ NRF_CLOCK_LFCLKSRC_RC_250_PPM_2000MS_CALIBRATION, /**< LFCLK RC oscillator, 2000ms calibration interval.*/
+ NRF_CLOCK_LFCLKSRC_RC_250_PPM_4000MS_CALIBRATION, /**< LFCLK RC oscillator, 4000ms calibration interval.*/
+ NRF_CLOCK_LFCLKSRC_RC_250_PPM_8000MS_CALIBRATION, /**< LFCLK RC oscillator, 8000ms calibration interval.*/
+ NRF_CLOCK_LFCLKSRC_RC_250_PPM_TEMP_1000MS_CALIBRATION, /**< LFCLK RC oscillator. Temperature checked every 1000ms, if changed above a threshold, a calibration is done.*/
+ NRF_CLOCK_LFCLKSRC_RC_250_PPM_TEMP_2000MS_CALIBRATION, /**< LFCLK RC oscillator. Temperature checked every 2000ms, if changed above a threshold, a calibration is done.*/
+ NRF_CLOCK_LFCLKSRC_RC_250_PPM_TEMP_4000MS_CALIBRATION, /**< LFCLK RC oscillator. Temperature checked every 4000ms, if changed above a threshold, a calibration is done.*/
+ NRF_CLOCK_LFCLKSRC_RC_250_PPM_TEMP_8000MS_CALIBRATION, /**< LFCLK RC oscillator. Temperature checked every 8000ms, if changed above a threshold, a calibration is done.*/
+ NRF_CLOCK_LFCLKSRC_RC_250_PPM_TEMP_16000MS_CALIBRATION, /**< LFCLK RC oscillator. Temperature checked every 16000ms, if changed above a threshold, a calibration is done.*/
+};
+
+/** @} */
+
+/** @addtogroup NRF_SDM_TYPES Types
+ * @{ */
+
+/**@brief Type representing lfclk oscillator source. */
+typedef uint32_t nrf_clock_lfclksrc_t;
+
+
+/**@brief SoftDevice Assertion Handler type.
+ *
+ * When an unexpected error occurs within the SoftDevice it will call the SoftDevice assertion handler callback.
+ * The protocol stack will be in an undefined state when this happens and the only way to recover will be to
+ * perform a reset, using e.g. CMSIS NVIC_SystemReset().
+ *
+ * @note This callback is executed in HardFault context, thus SVC functions cannot be called from the SoftDevice assert callback.
+ *
+ * @param[in] pc The program counter of the failed assert.
+ * @param[in] line_number Line number where the assert failed.
+ * @param[in] file_name File name where the assert failed.
+ */
+typedef void (*softdevice_assertion_handler_t)(uint32_t pc, uint16_t line_number, const uint8_t * p_file_name);
+
+/** @} */
+
+/** @addtogroup NRF_SDM_FUNCTIONS Functions
+ * @{ */
+
+/**@brief Enables the SoftDevice and by extension the protocol stack.
+ *
+ * Idempotent function to enable the SoftDevice.
+ *
+ * @note Some care must be taken if a low frequency clock source is already running when calling this function:
+ * If the LF clock has a different source then the one currently running, it will be stopped. Then, the new
+ * clock source will be started.
+ *
+ * @note This function has no effect when returning with an error.
+ *
+ * @post If return code is ::NRF_SUCCESS
+ * - SoC library and protocol stack APIs are made available
+ * - A portion of RAM will be unavailable (see relevant SDS documentation)
+ * - Some peripherals will be unavailable or available only through the SoC API (see relevant SDS documentation)
+ * - Interrupts will not arrive from protected peripherals or interrupts
+ * - nrf_nvic_ functions must be used instead of CMSIS NVIC_ functions for reliable usage of the softdevice.
+ * - Interrupt latency may be affected by the SoftDevice (see relevant SDS documentation)
+ * - Chosen low frequency clock source will be running
+ *
+ * @param clock_source Low frequency clock source and accuracy. (Note: In the case of XTAL source, the PPM accuracy of the chosen clock source must be greater than or equal to the actual characteristics of your XTAL clock).
+ * @param assertion_handler Callback for SoftDevice assertions.
+ *
+ * @retval ::NRF_SUCCESS
+ * @retval ::NRF_ERROR_SDM_INCORRECT_INTERRUPT_CONFIGURATION SoftDeviceinterrupt is already enabled, or an enabled interrupt has an illegal priority level
+ * @retval ::NRF_ERROR_SDM_LFCLK_SOURCE_UNKNOWN Unknown low frequency clock source selected
+ */
+SVCALL(SD_SOFTDEVICE_ENABLE, uint32_t, sd_softdevice_enable(nrf_clock_lfclksrc_t clock_source, softdevice_assertion_handler_t assertion_handler));
+
+/**@brief Disables the SoftDevice and by extension the protocol stack.
+ *
+ * Idempotent function to disable the SoftDevice.
+ *
+ * @post SoC library and protocol stack APIs are made unavailable.
+ * @post All interrupts that was protected by the SoftDevice will be disabled and initialized to priority 0 (highest).
+ * @post All peripherals used by the SoftDevice will be reset to default values.
+ * @post All of RAM become available.
+ * @post All interrupts are forwarded to the application.
+ * @post LFCLK source chosen in ::sd_softdevice_enable will be left running.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_SOFTDEVICE_DISABLE, uint32_t, sd_softdevice_disable(void));
+
+/**@brief Check if the SoftDevice is enabled.
+ *
+ * @param[out] p_softdevice_enabled If the SoftDevice is enabled: 1 else 0.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_SOFTDEVICE_IS_ENABLED, uint32_t, sd_softdevice_is_enabled(uint8_t * p_softdevice_enabled));
+
+/**@brief Sets the base address of the interrupt vector table for interrupts forwarded from the SoftDevice
+ *
+ * This function is only intended to be called when a bootloader is enabled.
+ *
+ * @param[in] address The base address of the interrupt vector table for forwarded interrupts.
+
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_SOFTDEVICE_VECTOR_TABLE_BASE_SET, uint32_t, sd_softdevice_vector_table_base_set(uint32_t address));
+
+/** @} */
+
+#endif // NRF_SDM_H__
+
+/**
+ @}
+*/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/s110_nrf51822_7_1_0/s110_nrf51822_7.1.0_API/include/nrf_soc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,958 @@
+/* Copyright (c) 2011 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+
+/**
+ * @defgroup nrf_soc_api SoC Library API
+ * @{
+ *
+ * @brief APIs for the SoC library.
+ *
+*/
+
+#ifndef NRF_SOC_H__
+#define NRF_SOC_H__
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "nrf_svc.h"
+#include "nrf51.h"
+#include "nrf51_bitfields.h"
+#include "nrf_error_soc.h"
+
+/** @addtogroup NRF_SOC_DEFINES Defines
+ * @{ */
+
+/**@brief The number of the lowest SVC number reserved for the SoC library. */
+#define SOC_SVC_BASE (0x20)
+#define SOC_SVC_BASE_NOT_AVAILABLE (0x23)
+
+/**@brief Guranteed time for application to process radio inactive notification. */
+#define NRF_RADIO_NOTIFICATION_INACTIVE_GUARANTEED_TIME_US (62)
+
+/**@brief The minimum allowed timeslot extension time. */
+#define NRF_RADIO_MINIMUM_TIMESLOT_LENGTH_EXTENSION_TIME_US (200)
+
+#define SOC_ECB_KEY_LENGTH (16) /**< ECB key length. */
+#define SOC_ECB_CLEARTEXT_LENGTH (16) /**< ECB cleartext length. */
+#define SOC_ECB_CIPHERTEXT_LENGTH (SOC_ECB_CLEARTEXT_LENGTH) /**< ECB ciphertext length. */
+
+#define SD_EVT_IRQn (SWI2_IRQn) /**< SoftDevice Event IRQ number. Used for both protocol events and SoC events. */
+#define SD_EVT_IRQHandler (SWI2_IRQHandler) /**< SoftDevice Event IRQ handler. Used for both protocol events and SoC events. */
+#define RADIO_NOTIFICATION_IRQn (SWI1_IRQn) /**< The radio notification IRQ number. */
+#define RADIO_NOTIFICATION_IRQHandler (SWI1_IRQHandler) /**< The radio notification IRQ handler. */
+
+#define NRF_RADIO_LENGTH_MIN_US (100) /**< The shortest allowed radio timeslot, in microseconds. */
+#define NRF_RADIO_LENGTH_MAX_US (100000) /**< The longest allowed radio timeslot, in microseconds. */
+
+#define NRF_RADIO_DISTANCE_MAX_US (128000000UL - 1UL) /**< The longest timeslot distance, in microseconds, allowed for the distance parameter (see @ref nrf_radio_request_normal_t) in the request. */
+
+#define NRF_RADIO_EARLIEST_TIMEOUT_MAX_US (128000000UL - 1UL) /**< The longest timeout, in microseconds, allowed when requesting the earliest possible timeslot. */
+
+#define NRF_RADIO_START_JITTER_US (2) /**< The maximum jitter in NRF_RADIO_CALLBACK_SIGNAL_TYPE_START relative to the requested start time. */
+
+/** @} */
+
+/** @addtogroup NRF_SOC_TYPES Types
+ * @{ */
+
+/**@brief The SVC numbers used by the SVC functions in the SoC library. */
+enum NRF_SOC_SVCS
+{
+ SD_FLASH_PAGE_ERASE = SOC_SVC_BASE,
+ SD_FLASH_WRITE,
+ SD_FLASH_PROTECT,
+ SD_MUTEX_NEW = SOC_SVC_BASE_NOT_AVAILABLE,
+ SD_MUTEX_ACQUIRE,
+ SD_MUTEX_RELEASE,
+ SD_NVIC_ENABLEIRQ,
+ SD_NVIC_DISABLEIRQ,
+ SD_NVIC_GETPENDINGIRQ,
+ SD_NVIC_SETPENDINGIRQ,
+ SD_NVIC_CLEARPENDINGIRQ,
+ SD_NVIC_SETPRIORITY,
+ SD_NVIC_GETPRIORITY,
+ SD_NVIC_SYSTEMRESET,
+ SD_NVIC_CRITICAL_REGION_ENTER,
+ SD_NVIC_CRITICAL_REGION_EXIT,
+ SD_RAND_APPLICATION_POOL_CAPACITY,
+ SD_RAND_APPLICATION_BYTES_AVAILABLE,
+ SD_RAND_APPLICATION_GET_VECTOR,
+ SD_POWER_MODE_SET,
+ SD_POWER_SYSTEM_OFF,
+ SD_POWER_RESET_REASON_GET,
+ SD_POWER_RESET_REASON_CLR,
+ SD_POWER_POF_ENABLE,
+ SD_POWER_POF_THRESHOLD_SET,
+ SD_POWER_RAMON_SET,
+ SD_POWER_RAMON_CLR,
+ SD_POWER_RAMON_GET,
+ SD_POWER_GPREGRET_SET,
+ SD_POWER_GPREGRET_CLR,
+ SD_POWER_GPREGRET_GET,
+ SD_POWER_DCDC_MODE_SET,
+ SD_APP_EVT_WAIT,
+ SD_CLOCK_HFCLK_REQUEST,
+ SD_CLOCK_HFCLK_RELEASE,
+ SD_CLOCK_HFCLK_IS_RUNNING,
+ SD_PPI_CHANNEL_ENABLE_GET,
+ SD_PPI_CHANNEL_ENABLE_SET,
+ SD_PPI_CHANNEL_ENABLE_CLR,
+ SD_PPI_CHANNEL_ASSIGN,
+ SD_PPI_GROUP_TASK_ENABLE,
+ SD_PPI_GROUP_TASK_DISABLE,
+ SD_PPI_GROUP_ASSIGN,
+ SD_PPI_GROUP_GET,
+ SD_RADIO_NOTIFICATION_CFG_SET,
+ SD_ECB_BLOCK_ENCRYPT,
+ SD_RADIO_SESSION_OPEN,
+ SD_RADIO_SESSION_CLOSE,
+ SD_RADIO_REQUEST,
+ SD_EVT_GET,
+ SD_TEMP_GET,
+ SVC_SOC_LAST
+};
+
+/**@brief Possible values of a ::nrf_mutex_t. */
+enum NRF_MUTEX_VALUES
+{
+ NRF_MUTEX_FREE,
+ NRF_MUTEX_TAKEN
+};
+
+/**@brief Possible values of ::nrf_app_irq_priority_t. */
+enum NRF_APP_PRIORITIES
+{
+ NRF_APP_PRIORITY_HIGH = 1,
+ NRF_APP_PRIORITY_LOW = 3
+};
+
+/**@brief Possible values of ::nrf_power_mode_t. */
+enum NRF_POWER_MODES
+{
+ NRF_POWER_MODE_CONSTLAT, /**< Constant latency mode. See power management in the reference manual. */
+ NRF_POWER_MODE_LOWPWR /**< Low power mode. See power management in the reference manual. */
+};
+
+
+/**@brief Possible values of ::nrf_power_failure_threshold_t */
+enum NRF_POWER_THRESHOLDS
+{
+ NRF_POWER_THRESHOLD_V21, /**< 2.1 Volts power failure threshold. */
+ NRF_POWER_THRESHOLD_V23, /**< 2.3 Volts power failure threshold. */
+ NRF_POWER_THRESHOLD_V25, /**< 2.5 Volts power failure threshold. */
+ NRF_POWER_THRESHOLD_V27 /**< 2.7 Volts power failure threshold. */
+};
+
+
+/**@brief Possible values of ::nrf_power_dcdc_mode_t. */
+enum NRF_POWER_DCDC_MODES
+{
+ NRF_POWER_DCDC_MODE_OFF, /**< The DCDC is always off. */
+ NRF_POWER_DCDC_MODE_ON, /**< The DCDC is always on. */
+ NRF_POWER_DCDC_MODE_AUTOMATIC /**< The DCDC is automatically managed. */
+};
+
+/**@brief Possible values of ::nrf_radio_notification_distance_t. */
+enum NRF_RADIO_NOTIFICATION_DISTANCES
+{
+ NRF_RADIO_NOTIFICATION_DISTANCE_NONE = 0, /**< The event does not have a notification. */
+ NRF_RADIO_NOTIFICATION_DISTANCE_800US, /**< The distance from the active notification to start of radio activity. */
+ NRF_RADIO_NOTIFICATION_DISTANCE_1740US, /**< The distance from the active notification to start of radio activity. */
+ NRF_RADIO_NOTIFICATION_DISTANCE_2680US, /**< The distance from the active notification to start of radio activity. */
+ NRF_RADIO_NOTIFICATION_DISTANCE_3620US, /**< The distance from the active notification to start of radio activity. */
+ NRF_RADIO_NOTIFICATION_DISTANCE_4560US, /**< The distance from the active notification to start of radio activity. */
+ NRF_RADIO_NOTIFICATION_DISTANCE_5500US /**< The distance from the active notification to start of radio activity. */
+};
+
+
+/**@brief Possible values of ::nrf_radio_notification_type_t. */
+enum NRF_RADIO_NOTIFICATION_TYPES
+{
+ NRF_RADIO_NOTIFICATION_TYPE_NONE = 0, /**< The event does not have a radio notification signal. */
+ NRF_RADIO_NOTIFICATION_TYPE_INT_ON_ACTIVE, /**< Using interrupt for notification when the radio will be enabled. */
+ NRF_RADIO_NOTIFICATION_TYPE_INT_ON_INACTIVE, /**< Using interrupt for notification when the radio has been disabled. */
+ NRF_RADIO_NOTIFICATION_TYPE_INT_ON_BOTH, /**< Using interrupt for notification both when the radio will be enabled and disabled. */
+};
+
+/**@brief SoC Events. */
+enum NRF_SOC_EVTS
+{
+ NRF_EVT_HFCLKSTARTED, /**< Event indicating that the HFCLK has started. */
+ NRF_EVT_POWER_FAILURE_WARNING, /**< Event indicating that a power failure warning has occurred. */
+ NRF_EVT_FLASH_OPERATION_SUCCESS, /**< Event indicating that the ongoing flash operation has completed successfully. */
+ NRF_EVT_FLASH_OPERATION_ERROR, /**< Event indicating that the ongoing flash operation has timed out with an error. */
+ NRF_EVT_RADIO_BLOCKED, /**< Event indicating that a radio timeslot was blocked. */
+ NRF_EVT_RADIO_CANCELED, /**< Event indicating that a radio timeslot was canceled by SoftDevice. */
+ NRF_EVT_RADIO_SIGNAL_CALLBACK_INVALID_RETURN, /**< Event indicating that a radio signal callback handler return was invalid. */
+ NRF_EVT_RADIO_SESSION_IDLE, /**< Event indicating that a radio session is idle. */
+ NRF_EVT_RADIO_SESSION_CLOSED, /**< Event indicating that a radio session is closed. */
+ NRF_EVT_NUMBER_OF_EVTS
+};
+
+/** @} */
+
+/** @addtogroup NRF_SOC_TYPES Types
+ * @{ */
+
+/**@brief Represents a mutex for use with the nrf_mutex functions.
+ * @note Accessing the value directly is not safe, use the mutex functions!
+ */
+typedef volatile uint8_t nrf_mutex_t;
+
+/**@brief The interrupt priorities available to the application while the softdevice is active. */
+typedef uint8_t nrf_app_irq_priority_t;
+
+/**@brief Represents a power mode, used in power mode functions */
+typedef uint8_t nrf_power_mode_t;
+
+/**@brief Represents a power failure threshold value. */
+typedef uint8_t nrf_power_failure_threshold_t;
+
+/**@brief Represents a DCDC mode value. */
+typedef uint32_t nrf_power_dcdc_mode_t;
+
+/**@brief Radio notification distances. */
+typedef uint8_t nrf_radio_notification_distance_t;
+
+/**@brief Radio notification types. */
+typedef uint8_t nrf_radio_notification_type_t;
+
+/** @brief The Radio signal callback types. */
+enum NRF_RADIO_CALLBACK_SIGNAL_TYPE
+{
+ NRF_RADIO_CALLBACK_SIGNAL_TYPE_START, /**< This signal indicates the start of the radio timeslot. */
+ NRF_RADIO_CALLBACK_SIGNAL_TYPE_TIMER0, /**< This signal indicates the NRF_TIMER0 interrupt. */
+ NRF_RADIO_CALLBACK_SIGNAL_TYPE_RADIO, /**< This signal indicates the NRF_RADIO interrupt. */
+ NRF_RADIO_CALLBACK_SIGNAL_TYPE_EXTEND_FAILED, /**< This signal indicates extend action failed. */
+ NRF_RADIO_CALLBACK_SIGNAL_TYPE_EXTEND_SUCCEEDED /**< This signal indicates extend action succeeded. */
+};
+
+/** @brief The actions requested by the signal callback.
+ *
+ * This code gives the SOC instructions about what action to take when the signal callback has
+ * returned.
+ */
+enum NRF_RADIO_SIGNAL_CALLBACK_ACTION
+{
+ NRF_RADIO_SIGNAL_CALLBACK_ACTION_NONE, /**< Return without action. */
+ NRF_RADIO_SIGNAL_CALLBACK_ACTION_EXTEND, /**< Request an extension of the current timeslot (maximum execution time for this action is when the extension succeeded). */
+ NRF_RADIO_SIGNAL_CALLBACK_ACTION_END, /**< End the current radio timeslot. */
+ NRF_RADIO_SIGNAL_CALLBACK_ACTION_REQUEST_AND_END /**< Request a new radio timeslot and end the current timeslot. */
+};
+
+/**@brief Radio timeslot high frequency clock source configuration. */
+enum NRF_RADIO_HFCLK_CFG
+{
+ NRF_RADIO_HFCLK_CFG_DEFAULT, /**< Use the currently selected oscillator as HF clock source during the timeslot (i.e. the source is not specified). */
+ NRF_RADIO_HFCLK_CFG_FORCE_XTAL, /**< Force external crystal to be used as HF clock source during whole the timeslot. */
+};
+
+/** @brief Radio timeslot priorities. */
+enum NRF_RADIO_PRIORITY
+{
+ NRF_RADIO_PRIORITY_HIGH, /**< High (equal priority as the normal connection priority of the SoftDevice stack(s)). */
+ NRF_RADIO_PRIORITY_NORMAL, /**< Normal (equal priority as the priority of secondary activites of the SoftDevice stack(s)). */
+};
+
+/** @brief Radio timeslot request type. */
+enum NRF_RADIO_REQUEST_TYPE
+{
+ NRF_RADIO_REQ_TYPE_EARLIEST, /**< Request timeslot as early as possible. This should always be used for the first request in a session. */
+ NRF_RADIO_REQ_TYPE_NORMAL /**< Normal timeslot request. */
+};
+
+/** @brief Parameters for a request for a timeslot as early as possible. */
+typedef struct
+{
+ uint8_t hfclk; /**< High frequency clock source, see @ref NRF_RADIO_HFCLK_CFG. */
+ uint8_t priority; /**< The radio timeslot priority, see @ref NRF_RADIO_PRIORITY. */
+ uint32_t length_us; /**< The radio timeslot length (in the range 100 to 100,000] microseconds). */
+ uint32_t timeout_us; /**< Longest acceptable delay until the start of the requested timeslot (up to @ref NRF_RADIO_EARLIEST_TIMEOUT_MAX_US microseconds). */
+} nrf_radio_request_earliest_t;
+
+/** @brief Parameters for a normal radio request. */
+typedef struct
+{
+ uint8_t hfclk; /**< High frequency clock source, see @ref NRF_RADIO_HFCLK_CFG. */
+ uint8_t priority; /**< The radio timeslot priority, see @ref NRF_RADIO_PRIORITY. */
+ uint32_t distance_us; /**< Distance from the start of the previous radio timeslot (up to @ref NRF_RADIO_DISTANCE_MAX_US microseconds). */
+ uint32_t length_us; /**< The radio timeslot length (in the range [100..100,000] microseconds). */
+} nrf_radio_request_normal_t;
+
+/** @brief Radio request parameters. */
+typedef struct
+{
+ uint8_t request_type; /**< Type of request, see @ref NRF_RADIO_REQUEST_TYPE. */
+ union
+ {
+ nrf_radio_request_earliest_t earliest; /**< Parameters for a request for a timeslot as early as possible. */
+ nrf_radio_request_normal_t normal; /**< Parameters for a normal radio request. */
+ } params;
+} nrf_radio_request_t;
+
+/**@brief Return parameters of the radio timeslot signal callback. */
+typedef struct
+{
+ uint8_t callback_action; /**< The action requested by the application when returning from the signal callback, see @ref NRF_RADIO_SIGNAL_CALLBACK_ACTION. */
+ union
+ {
+ struct
+ {
+ nrf_radio_request_t * p_next; /**< The request parameters for the next radio timeslot. */
+ } request; /**< Additional parameters for return_code @ref NRF_RADIO_SIGNAL_CALLBACK_ACTION_REQUEST_AND_END. */
+ struct
+ {
+ uint32_t length_us; /**< Requested extension of the timeslot duration (microseconds) (for minimum time see @ref NRF_RADIO_MINIMUM_TIMESLOT_LENGTH_EXTENSION_TIME_US). */
+ } extend; /**< Additional parameters for return_code @ref NRF_RADIO_SIGNAL_CALLBACK_ACTION_EXTEND. */
+ } params;
+} nrf_radio_signal_callback_return_param_t;
+
+/**@brief The radio signal callback type.
+ *
+ * @note In case of invalid return parameters, the radio timeslot will automatically end
+ * immediately after returning from the signal callback and the
+ * @ref NRF_EVT_RADIO_SIGNAL_CALLBACK_INVALID_RETURN event will be sent.
+ * @note The returned struct pointer must remain valid after the signal callback
+ * function returns. For instance, this means that it must not point to a stack variable.
+ *
+ * @param[in] signal_type Type of signal, see @ref NRF_RADIO_CALLBACK_SIGNAL_TYPE.
+ *
+ * @return Pointer to structure containing action requested by the application.
+ */
+typedef nrf_radio_signal_callback_return_param_t * (*nrf_radio_signal_callback_t) (uint8_t signal_type);
+
+/**@brief AES ECB data structure */
+typedef struct
+{
+ uint8_t key[SOC_ECB_KEY_LENGTH]; /**< Encryption key. */
+ uint8_t cleartext[SOC_ECB_CLEARTEXT_LENGTH]; /**< Clear Text data. */
+ uint8_t ciphertext[SOC_ECB_CIPHERTEXT_LENGTH]; /**< Cipher Text data. */
+} nrf_ecb_hal_data_t;
+
+/** @} */
+
+/** @addtogroup NRF_SOC_FUNCTIONS Functions
+ * @{ */
+
+/**@brief Initialize a mutex.
+ *
+ * @param[in] p_mutex Pointer to the mutex to initialize.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_MUTEX_NEW, uint32_t, sd_mutex_new(nrf_mutex_t * p_mutex));
+
+/**@brief Attempt to acquire a mutex.
+ *
+ * @param[in] p_mutex Pointer to the mutex to acquire.
+ *
+ * @retval ::NRF_SUCCESS The mutex was successfully acquired.
+ * @retval ::NRF_ERROR_SOC_MUTEX_ALREADY_TAKEN The mutex could not be acquired.
+ */
+SVCALL(SD_MUTEX_ACQUIRE, uint32_t, sd_mutex_acquire(nrf_mutex_t * p_mutex));
+
+/**@brief Release a mutex.
+ *
+ * @param[in] p_mutex Pointer to the mutex to release.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_MUTEX_RELEASE, uint32_t, sd_mutex_release(nrf_mutex_t * p_mutex));
+
+/**@brief Enable External Interrupt.
+ * @note Corresponds to NVIC_EnableIRQ in CMSIS.
+ *
+ * @pre{IRQn is valid and not reserved by the stack}
+ *
+ * @param[in] IRQn See the NVIC_EnableIRQ documentation in CMSIS.
+ *
+ * @retval ::NRF_SUCCESS The interrupt was enabled.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE The interrupt is not available for the application.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED The interrupt has a priority not available for the application.
+ */
+SVCALL(SD_NVIC_ENABLEIRQ, uint32_t, sd_nvic_EnableIRQ(IRQn_Type IRQn));
+
+/**@brief Disable External Interrupt.
+ * @note Corresponds to NVIC_DisableIRQ in CMSIS.
+ *
+ * @pre{IRQn is valid and not reserved by the stack}
+ *
+ * @param[in] IRQn See the NVIC_DisableIRQ documentation in CMSIS
+ *
+ * @retval ::NRF_SUCCESS The interrupt was disabled.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE The interrupt is not available for the application.
+ */
+SVCALL(SD_NVIC_DISABLEIRQ, uint32_t, sd_nvic_DisableIRQ(IRQn_Type IRQn));
+
+/**@brief Get Pending Interrupt.
+ * @note Corresponds to NVIC_GetPendingIRQ in CMSIS.
+ *
+ * @pre{IRQn is valid and not reserved by the stack}
+ *
+ * @param[in] IRQn See the NVIC_GetPendingIRQ documentation in CMSIS.
+ * @param[out] p_pending_irq Return value from NVIC_GetPendingIRQ.
+ *
+ * @retval ::NRF_SUCCESS The interrupt is available for the application.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application.
+ */
+SVCALL(SD_NVIC_GETPENDINGIRQ, uint32_t, sd_nvic_GetPendingIRQ(IRQn_Type IRQn, uint32_t * p_pending_irq));
+
+/**@brief Set Pending Interrupt.
+ * @note Corresponds to NVIC_SetPendingIRQ in CMSIS.
+ *
+ * @pre{IRQn is valid and not reserved by the stack}
+ *
+ * @param[in] IRQn See the NVIC_SetPendingIRQ documentation in CMSIS.
+ *
+ * @retval ::NRF_SUCCESS The interrupt is set pending.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application.
+ */
+SVCALL(SD_NVIC_SETPENDINGIRQ, uint32_t, sd_nvic_SetPendingIRQ(IRQn_Type IRQn));
+
+/**@brief Clear Pending Interrupt.
+ * @note Corresponds to NVIC_ClearPendingIRQ in CMSIS.
+ *
+ * @pre{IRQn is valid and not reserved by the stack}
+ *
+ * @param[in] IRQn See the NVIC_ClearPendingIRQ documentation in CMSIS.
+ *
+ * @retval ::NRF_SUCCESS The interrupt pending flag is cleared.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application.
+ */
+SVCALL(SD_NVIC_CLEARPENDINGIRQ, uint32_t, sd_nvic_ClearPendingIRQ(IRQn_Type IRQn));
+
+/**@brief Set Interrupt Priority.
+ * @note Corresponds to NVIC_SetPriority in CMSIS.
+ *
+ * @pre{IRQn is valid and not reserved by the stack}
+ * @pre{priority is valid and not reserved by the stack}
+ *
+ * @param[in] IRQn See the NVIC_SetPriority documentation in CMSIS.
+ * @param[in] priority A valid IRQ priority for use by the application.
+ *
+ * @retval ::NRF_SUCCESS The interrupt and priority level is available for the application.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED The interrupt priority is not available for the application.
+ */
+SVCALL(SD_NVIC_SETPRIORITY, uint32_t, sd_nvic_SetPriority(IRQn_Type IRQn, nrf_app_irq_priority_t priority));
+
+/**@brief Get Interrupt Priority.
+ * @note Corresponds to NVIC_GetPriority in CMSIS.
+ *
+ * @pre{IRQn is valid and not reserved by the stack}
+ *
+ * @param[in] IRQn See the NVIC_GetPriority documentation in CMSIS.
+ * @param[out] p_priority Return value from NVIC_GetPriority.
+ *
+ * @retval ::NRF_SUCCESS The interrupt priority is returned in p_priority.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE - IRQn is not available for the application.
+ */
+SVCALL(SD_NVIC_GETPRIORITY, uint32_t, sd_nvic_GetPriority(IRQn_Type IRQn, nrf_app_irq_priority_t * p_priority));
+
+/**@brief System Reset.
+ * @note Corresponds to NVIC_SystemReset in CMSIS.
+ *
+ * @retval ::NRF_ERROR_SOC_NVIC_SHOULD_NOT_RETURN
+ */
+SVCALL(SD_NVIC_SYSTEMRESET, uint32_t, sd_nvic_SystemReset(void));
+
+/**@brief Enters critical region.
+ *
+ * @post Application interrupts will be disabled.
+ * @sa sd_nvic_critical_region_exit
+ *
+ * @param[out] p_is_nested_critical_region 1: If in a nested critical region.
+ * 0: Otherwise.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_NVIC_CRITICAL_REGION_ENTER, uint32_t, sd_nvic_critical_region_enter(uint8_t * p_is_nested_critical_region));
+
+/**@brief Exit critical region.
+ *
+ * @pre Application has entered a critical region using ::sd_nvic_critical_region_enter.
+ * @post If not in a nested critical region, the application interrupts will restored to the state before ::sd_nvic_critical_region_enter was called.
+ *
+ * @param[in] is_nested_critical_region If this is set to 1, the critical region won't be exited. @sa sd_nvic_critical_region_enter.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_NVIC_CRITICAL_REGION_EXIT, uint32_t, sd_nvic_critical_region_exit(uint8_t is_nested_critical_region));
+
+/**@brief Query the capacity of the application random pool.
+ *
+ * @param[out] p_pool_capacity The capacity of the pool.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_RAND_APPLICATION_POOL_CAPACITY, uint32_t, sd_rand_application_pool_capacity_get(uint8_t * p_pool_capacity));
+
+/**@brief Get number of random bytes available to the application.
+ *
+ * @param[out] p_bytes_available The number of bytes currently available in the pool.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_RAND_APPLICATION_BYTES_AVAILABLE, uint32_t, sd_rand_application_bytes_available_get(uint8_t * p_bytes_available));
+
+/**@brief Get random bytes from the application pool.
+ *
+ * @param[out] p_buff Pointer to unit8_t buffer for storing the bytes.
+ * @param[in] length Number of bytes to take from pool and place in p_buff.
+ *
+ * @retval ::NRF_SUCCESS The requested bytes were written to p_buff.
+ * @retval ::NRF_ERROR_SOC_RAND_NOT_ENOUGH_VALUES No bytes were written to the buffer, because there were not enough bytes available.
+*/
+SVCALL(SD_RAND_APPLICATION_GET_VECTOR, uint32_t, sd_rand_application_vector_get(uint8_t * p_buff, uint8_t length));
+
+/**@brief Gets the reset reason register.
+ *
+ * @param[out] p_reset_reason Contents of the NRF_POWER->RESETREAS register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_POWER_RESET_REASON_GET, uint32_t, sd_power_reset_reason_get(uint32_t * p_reset_reason));
+
+/**@brief Clears the bits of the reset reason register.
+ *
+ * @param[in] reset_reason_clr_msk Contains the bits to clear from the reset reason register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_POWER_RESET_REASON_CLR, uint32_t, sd_power_reset_reason_clr(uint32_t reset_reason_clr_msk));
+
+/**@brief Sets the power mode when in CPU sleep.
+ *
+ * @param[in] power_mode The power mode to use when in CPU sleep. @sa sd_app_evt_wait
+ *
+ * @retval ::NRF_SUCCESS The power mode was set.
+ * @retval ::NRF_ERROR_SOC_POWER_MODE_UNKNOWN The power mode was unknown.
+ */
+SVCALL(SD_POWER_MODE_SET, uint32_t, sd_power_mode_set(nrf_power_mode_t power_mode));
+
+/**@brief Puts the chip in System OFF mode.
+ *
+ * @retval ::NRF_ERROR_SOC_POWER_OFF_SHOULD_NOT_RETURN
+ */
+SVCALL(SD_POWER_SYSTEM_OFF, uint32_t, sd_power_system_off(void));
+
+/**@brief Enables or disables the power-fail comparator.
+ *
+ * Enabling this will give a softdevice event (NRF_EVT_POWER_FAILURE_WARNING) when the power failure warning occurs.
+ * The event can be retrieved with sd_evt_get();
+ *
+ * @param[in] pof_enable True if the power-fail comparator should be enabled, false if it should be disabled.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_POWER_POF_ENABLE, uint32_t, sd_power_pof_enable(uint8_t pof_enable));
+
+/**@brief Sets the power-fail threshold value.
+ *
+ * @param[in] threshold The power-fail threshold value to use.
+ *
+ * @retval ::NRF_SUCCESS The power failure threshold was set.
+ * @retval ::NRF_ERROR_SOC_POWER_POF_THRESHOLD_UNKNOWN The power failure threshold is unknown.
+ */
+SVCALL(SD_POWER_POF_THRESHOLD_SET, uint32_t, sd_power_pof_threshold_set(nrf_power_failure_threshold_t threshold));
+
+/**@brief Sets bits in the NRF_POWER->RAMON register.
+ *
+ * @param[in] ramon Contains the bits needed to be set in the NRF_POWER->RAMON register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_POWER_RAMON_SET, uint32_t, sd_power_ramon_set(uint32_t ramon));
+
+/** @brief Clears bits in the NRF_POWER->RAMON register.
+ *
+ * @param ramon Contains the bits needed to be cleared in the NRF_POWER->RAMON register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_POWER_RAMON_CLR, uint32_t, sd_power_ramon_clr(uint32_t ramon));
+
+/**@brief Get contents of NRF_POWER->RAMON register, indicates power status of ram blocks.
+ *
+ * @param[out] p_ramon Content of NRF_POWER->RAMON register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_POWER_RAMON_GET, uint32_t, sd_power_ramon_get(uint32_t * p_ramon));
+
+/**@brief Set bits in the NRF_POWER->GPREGRET register.
+ *
+ * @param[in] gpregret_msk Bits to be set in the GPREGRET register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_POWER_GPREGRET_SET, uint32_t, sd_power_gpregret_set(uint32_t gpregret_msk));
+
+/**@brief Clear bits in the NRF_POWER->GPREGRET register.
+ *
+ * @param[in] gpregret_msk Bits to be clear in the GPREGRET register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_POWER_GPREGRET_CLR, uint32_t, sd_power_gpregret_clr(uint32_t gpregret_msk));
+
+/**@brief Get contents of the NRF_POWER->GPREGRET register.
+ *
+ * @param[out] p_gpregret Contents of the GPREGRET register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_POWER_GPREGRET_GET, uint32_t, sd_power_gpregret_get(uint32_t *p_gpregret));
+
+/**@brief Sets the DCDC mode.
+ *
+ * Depending on the internal state of the SoftDevice, the mode change may not happen immediately.
+ * The DCDC mode switch will be blocked when occurring in close proximity to radio transmissions. When
+ * the radio transmission is done, the last mode will be used.
+ *
+ * @param[in] dcdc_mode The mode of the DCDC.
+ *
+ * @retval ::NRF_SUCCESS
+ * @retval ::NRF_ERROR_INVALID_PARAM The DCDC mode is invalid.
+ */
+SVCALL(SD_POWER_DCDC_MODE_SET, uint32_t, sd_power_dcdc_mode_set(nrf_power_dcdc_mode_t dcdc_mode));
+
+/**@brief Request the high frequency crystal oscillator.
+ *
+ * Will start the high frequency crystal oscillator, the startup time of the crystal varies
+ * and the ::sd_clock_hfclk_is_running function can be polled to check if it has started.
+ *
+ * @see sd_clock_hfclk_is_running
+ * @see sd_clock_hfclk_release
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_CLOCK_HFCLK_REQUEST, uint32_t, sd_clock_hfclk_request(void));
+
+/**@brief Releases the high frequency crystal oscillator.
+ *
+ * Will stop the high frequency crystal oscillator, this happens immediately.
+ *
+ * @see sd_clock_hfclk_is_running
+ * @see sd_clock_hfclk_request
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_CLOCK_HFCLK_RELEASE, uint32_t, sd_clock_hfclk_release(void));
+
+/**@brief Checks if the high frequency crystal oscillator is running.
+ *
+ * @see sd_clock_hfclk_request
+ * @see sd_clock_hfclk_release
+ *
+ * @param[out] p_is_running 1 if the external crystal oscillator is running, 0 if not.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_CLOCK_HFCLK_IS_RUNNING, uint32_t, sd_clock_hfclk_is_running(uint32_t * p_is_running));
+
+/**@brief Waits for an application event.
+ *
+ * An application event is either an application interrupt or a pended interrupt when the
+ * interrupt is disabled. When the interrupt is enabled it will be taken immediately since
+ * this function will wait in thread mode, then the execution will return in the application's
+ * main thread. When an interrupt is disabled and gets pended it will return to the application's
+ * thread main. The application must ensure that the pended flag is cleared using
+ * ::sd_nvic_ClearPendingIRQ in order to sleep using this function. This is only necessary for
+ * disabled interrupts, as the interrupt handler will clear the pending flag automatically for
+ * enabled interrupts.
+ *
+ * In order to wake up from disabled interrupts, the SEVONPEND flag has to be set in the Cortex-M0
+ * System Control Register (SCR). @sa CMSIS_SCB
+ *
+ * @note If an application interrupt has happened since the last time sd_app_evt_wait was
+ * called this function will return immediately and not go to sleep. This is to avoid race
+ * conditions that can occur when a flag is updated in the interrupt handler and processed
+ * in the main loop.
+ *
+ * @post An application interrupt has happened or a interrupt pending flag is set.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_APP_EVT_WAIT, uint32_t, sd_app_evt_wait(void));
+
+/**@brief Get PPI channel enable register contents.
+ *
+ * @param[out] p_channel_enable The contents of the PPI CHEN register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_PPI_CHANNEL_ENABLE_GET, uint32_t, sd_ppi_channel_enable_get(uint32_t * p_channel_enable));
+
+/**@brief Set PPI channel enable register.
+ *
+ * @param[in] channel_enable_set_msk Mask containing the bits to set in the PPI CHEN register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_PPI_CHANNEL_ENABLE_SET, uint32_t, sd_ppi_channel_enable_set(uint32_t channel_enable_set_msk));
+
+/**@brief Clear PPI channel enable register.
+ *
+ * @param[in] channel_enable_clr_msk Mask containing the bits to clear in the PPI CHEN register.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_PPI_CHANNEL_ENABLE_CLR, uint32_t, sd_ppi_channel_enable_clr(uint32_t channel_enable_clr_msk));
+
+/**@brief Assign endpoints to a PPI channel.
+ *
+ * @param[in] channel_num Number of the PPI channel to assign.
+ * @param[in] evt_endpoint Event endpoint of the PPI channel.
+ * @param[in] task_endpoint Task endpoint of the PPI channel.
+ *
+ * @retval ::NRF_ERROR_SOC_PPI_INVALID_CHANNEL The channel number is invalid.
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_PPI_CHANNEL_ASSIGN, uint32_t, sd_ppi_channel_assign(uint8_t channel_num, const volatile void * evt_endpoint, const volatile void * task_endpoint));
+
+/**@brief Task to enable a channel group.
+ *
+ * @param[in] group_num Number of the channel group.
+ *
+ * @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_PPI_GROUP_TASK_ENABLE, uint32_t, sd_ppi_group_task_enable(uint8_t group_num));
+
+/**@brief Task to disable a channel group.
+ *
+ * @param[in] group_num Number of the PPI group.
+ *
+ * @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid.
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_PPI_GROUP_TASK_DISABLE, uint32_t, sd_ppi_group_task_disable(uint8_t group_num));
+
+/**@brief Assign PPI channels to a channel group.
+ *
+ * @param[in] group_num Number of the channel group.
+ * @param[in] channel_msk Mask of the channels to assign to the group.
+ *
+ * @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid.
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_PPI_GROUP_ASSIGN, uint32_t, sd_ppi_group_assign(uint8_t group_num, uint32_t channel_msk));
+
+/**@brief Gets the PPI channels of a channel group.
+ *
+ * @param[in] group_num Number of the channel group.
+ * @param[out] p_channel_msk Mask of the channels assigned to the group.
+ *
+ * @retval ::NRF_ERROR_SOC_PPI_INVALID_GROUP The group number is invalid.
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_PPI_GROUP_GET, uint32_t, sd_ppi_group_get(uint8_t group_num, uint32_t * p_channel_msk));
+
+/**@brief Configures the Radio Notification signal.
+ *
+ * @note
+ * - The notification signal latency depends on the interrupt priority settings of SWI used
+ * for notification signal.
+ * - In the period between the ACTIVE signal and the start of the Radio Event, the SoftDevice
+ * will interrupt the application to do Radio Event preparation.
+ * - Using the Radio Notification feature may limit the bandwidth, as the SoftDevice may have
+ * to shorten the connection events to have time for the Radio Notification signals.
+ *
+ * @param[in] type Type of notification signal.
+ * @ref NRF_RADIO_NOTIFICATION_TYPE_NONE shall be used to turn off radio
+ * notification. Using @ref NRF_RADIO_NOTIFICATION_DISTANCE_NONE is
+ * recommended (but not required) to be used with
+ * @ref NRF_RADIO_NOTIFICATION_TYPE_NONE.
+ *
+ * @param[in] distance Distance between the notification signal and start of radio activity.
+ * This parameter is ignored when @ref NRF_RADIO_NOTIFICATION_TYPE_NONE or
+ * @ref NRF_RADIO_NOTIFICATION_TYPE_INT_ON_INACTIVE is used.
+ *
+ * @retval ::NRF_ERROR_INVALID_PARAM The group number is invalid.
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_RADIO_NOTIFICATION_CFG_SET, uint32_t, sd_radio_notification_cfg_set(nrf_radio_notification_type_t type, nrf_radio_notification_distance_t distance));
+
+/**@brief Encrypts a block according to the specified parameters.
+ *
+ * 128-bit AES encryption.
+ *
+ * @param[in, out] p_ecb_data Pointer to the ECB parameters' struct (two input
+ * parameters and one output parameter).
+ *
+ * @retval ::NRF_SUCCESS
+ */
+SVCALL(SD_ECB_BLOCK_ENCRYPT, uint32_t, sd_ecb_block_encrypt(nrf_ecb_hal_data_t * p_ecb_data));
+
+/**@brief Gets any pending events generated by the SoC API.
+ *
+ * The application should keep calling this function to get events, until ::NRF_ERROR_NOT_FOUND is returned.
+ *
+ * @param[out] p_evt_id Set to one of the values in @ref NRF_SOC_EVTS, if any events are pending.
+ *
+ * @retval ::NRF_SUCCESS An event was pending. The event id is written in the p_evt_id parameter.
+ * @retval ::NRF_ERROR_NOT_FOUND No pending events.
+ */
+SVCALL(SD_EVT_GET, uint32_t, sd_evt_get(uint32_t * p_evt_id));
+
+/**@brief Get the temperature measured on the chip
+ *
+ * This function will block until the temperature measurement is done.
+ * It takes around 50us from call to return.
+ *
+ * @note Pan #28 in PAN-028 v 1.6 "Negative measured values are not represented correctly" is corrected by this function.
+ *
+ * @param[out] p_temp Result of temperature measurement. Die temperature in 0.25 degrees celsius.
+ *
+ * @retval ::NRF_SUCCESS A temperature measurement was done, and the temperature was written to temp
+ */
+SVCALL(SD_TEMP_GET, uint32_t, sd_temp_get(int32_t * p_temp));
+
+/**@brief Flash Write
+ *
+ * Commands to write a buffer to flash
+ *
+ * This call initiates the flash access command, and its completion will be communicated to the
+ * application with exactly one of the following events:
+ * - NRF_EVT_FLASH_OPERATION_SUCCESS - The command was successfully completed.
+ * - NRF_EVT_FLASH_OPERATION_ERROR - The command could not be started.
+ *
+ * @note
+ * - This call takes control over the radio and the CPU during flash erase and write to make sure that
+ * they will not interfere with the flash access. This means that all interrupts will be blocked
+ * for a predictable time (depending on the NVMC specification in nRF51 Series Reference Manual
+ * and the command parameters).
+ *
+ *
+ * @param[in] p_dst Pointer to start of flash location to be written.
+ * @param[in] p_src Pointer to buffer with data to be written
+ * @param[in] size Number of 32-bit words to write. Maximum size is 256 32bit words.
+ *
+ * @retval ::NRF_ERROR_INVALID_ADDR Tried to write to a non existing flash address, or p_dst or p_src was unaligned.
+ * @retval ::NRF_ERROR_BUSY The previous command has not yet completed.
+ * @retval ::NRF_ERROR_INVALID_LENGTH Size was 0, or more than 256 words.
+ * @retval ::NRF_ERROR_FORBIDDEN Tried to write to or read from protected location.
+ * @retval ::NRF_SUCCESS The command was accepted.
+ */
+SVCALL(SD_FLASH_WRITE, uint32_t, sd_flash_write(uint32_t * const p_dst, uint32_t const * const p_src, uint32_t size));
+
+
+/**@brief Flash Erase page
+ *
+ * Commands to erase a flash page
+ *
+ * This call initiates the flash access command, and its completion will be communicated to the
+ * application with exactly one of the following events:
+ * - NRF_EVT_FLASH_OPERATION_SUCCESS - The command was successfully completed.
+ * - NRF_EVT_FLASH_OPERATION_ERROR - The command could not be started.
+ *
+ * @note
+ * - This call takes control over the radio and the CPU during flash erase and write to make sure that
+ * they will not interfere with the flash access. This means that all interrupts will be blocked
+ * for a predictable time (depending on the NVMC specification in nRF51 Series Reference Manual
+ * and the command parameters).
+ *
+ *
+ * @param[in] page_number Pagenumber of the page to erase
+ * @retval ::NRF_ERROR_INTERNAL If a new session could not be opened due to an internal error.
+ * @retval ::NRF_ERROR_INVALID_ADDR Tried to erase to a non existing flash page.
+ * @retval ::NRF_ERROR_BUSY The previous command has not yet completed.
+ * @retval ::NRF_ERROR_FORBIDDEN Tried to erase a protected page.
+ * @retval ::NRF_SUCCESS The command was accepted.
+ */
+SVCALL(SD_FLASH_PAGE_ERASE, uint32_t, sd_flash_page_erase(uint32_t page_number));
+
+
+/**@brief Flash Protection set
+ *
+ * Commands to set the flash protection registers PROTENSETx
+ *
+ * @note To read the values in PROTENSETx you can read them directly. They are only write-protected.
+ *
+ * @param[in] protenset0 Value to be written to PROTENSET0
+ * @param[in] protenset1 Value to be written to PROTENSET1
+ *
+ * @retval ::NRF_ERROR_FORBIDDEN Tried to protect the SoftDevice
+ * @retval ::NRF_SUCCESS Values successfully written to PROTENSETx
+ */
+SVCALL(SD_FLASH_PROTECT, uint32_t, sd_flash_protect(uint32_t protenset0, uint32_t protenset1));
+
+/**@brief Opens a session for radio requests.
+ *
+ * @note Only one session can be open at a time.
+ * @note p_radio_signal_callback(NRF_RADIO_CALLBACK_SIGNAL_TYPE_START) will be called when the radio timeslot
+ * starts. From this point the NRF_RADIO and NRF_TIMER0 peripherals can be freely accessed
+ * by the application.
+ * @note p_radio_signal_callback(NRF_RADIO_CALLBACK_SIGNAL_TYPE_TIMER0) is called whenever the NRF_TIMER0
+ * interrupt occurs.
+ * @note p_radio_signal_callback(NRF_RADIO_CALLBACK_SIGNAL_TYPE_RADIO) is called whenever the NRF_RADIO
+ * interrupt occurs.
+ * @note p_radio_signal_callback() will be called at ARM interrupt priority level 0. This
+ * implies that none of the sd_* API calls can be used from p_radio_signal_callback().
+ *
+ * @param[in] p_radio_signal_callback The signal callback.
+ *
+ * @retval ::NRF_ERROR_INVALID_ADDR p_radio_signal_callback is an invalid function pointer.
+ * @retval ::NRF_ERROR_BUSY If session cannot be opened.
+ * @retval ::NRF_ERROR_INTERNAL If a new session could not be opened due to an internal error.
+ * @retval ::NRF_SUCCESS Otherwise.
+ */
+ SVCALL(SD_RADIO_SESSION_OPEN, uint32_t, sd_radio_session_open(nrf_radio_signal_callback_t p_radio_signal_callback));
+
+/**@brief Closes a session for radio requests.
+ *
+ * @note Any current radio timeslot will be finished before the session is closed.
+ * @note If a radio timeslot is scheduled when the session is closed, it will be canceled.
+ * @note The application cannot consider the session closed until the NRF_EVT_RADIO_SESSION_CLOSED
+ * event is received.
+ *
+ * @retval ::NRF_ERROR_FORBIDDEN If session not opened.
+ * @retval ::NRF_ERROR_BUSY If session is currently being closed.
+ * @retval ::NRF_SUCCESS Otherwise.
+ */
+ SVCALL(SD_RADIO_SESSION_CLOSE, uint32_t, sd_radio_session_close(void));
+
+ /**@brief Requests a radio timeslot.
+ *
+ * @note The timing of the radio timeslot is specified by p_request->distance_us. For the first
+ * request in a session, p_request->distance_us is required to be 0 by convention, and
+ * the timeslot is scheduled at the first possible opportunity. All following radio timeslots are
+ * requested with a distance of p_request->distance_us measured from the start of the
+ * previous radio timeslot.
+ * @note A too small p_request->distance_us will lead to a NRF_EVT_RADIO_BLOCKED event.
+ * @note Timeslots scheduled too close will lead to a NRF_EVT_RADIO_BLOCKED event.
+ * @note See the SoftDevice Specification for more on radio timeslot scheduling, distances and lengths.
+ * @note If an opportunity for the first radio timeslot is not found before 100ms after the call to this
+ * function, it is not scheduled, and instead a NRF_EVT_RADIO_BLOCKED event is sent.
+ * The application may then try to schedule the first radio timeslot again.
+ * @note Successful requests will result in nrf_radio_signal_callback_t(NRF_RADIO_CALLBACK_SIGNAL_TYPE_START).
+ * Unsuccessful requests will result in a NRF_EVT_RADIO_BLOCKED event, see @ref NRF_SOC_EVTS.
+ * @note The jitter in the start time of the radio timeslots is +/- NRF_RADIO_START_JITTER_US us.
+ * @note The nrf_radio_signal_callback_t(NRF_RADIO_CALLBACK_SIGNAL_TYPE_START) call has a latency relative to the
+ * specified radio timeslot start, but this does not affect the actual start time of the timeslot.
+ * @note NRF_TIMER0 is reset at the start of the radio timeslot, and is clocked at 1MHz from the high frequency
+ * (16 MHz) clock source. If p_request->hfclk_force_xtal is true, the high frequency clock is
+ * guaranteed to be clocked from the external crystal.
+ * @note The SoftDevice will neither access the NRF_RADIO peripheral nor the NRF_TIMER0 peripheral
+ * during the radio timeslot.
+ *
+ * @param[in] p_request Pointer to the request parameters.
+ *
+ * @retval ::NRF_ERROR_FORBIDDEN If session not opened or the session is not IDLE.
+ * @retval ::NRF_ERROR_INVALID_ADDR If the p_request pointer is invalid.
+ * @retval ::NRF_ERROR_INVALID_PARAM If the parameters of p_request are not valid.
+ * @retval ::NRF_SUCCESS Otherwise.
+ */
+ SVCALL(SD_RADIO_REQUEST, uint32_t, sd_radio_request(nrf_radio_request_t * p_request ));
+
+/** @} */
+
+#endif // NRF_SOC_H__
+
+/**@} */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/s110_nrf51822_7_1_0/s110_nrf51822_7.1.0_API/include/nrf_svc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,33 @@
+#ifndef NRF_SVC__
+#define NRF_SVC__
+
+#ifdef SVCALL_AS_NORMAL_FUNCTION
+#define SVCALL(number, return_type, signature) return_type signature
+#else
+
+#ifndef SVCALL
+#if defined (__CC_ARM)
+#define SVCALL(number, return_type, signature) return_type __svc(number) signature
+#elif defined (__GNUC__)
+#define SVCALL(number, return_type, signature) \
+ _Pragma("GCC diagnostic ignored \"-Wreturn-type\"") \
+ _Pragma("GCC diagnostic ignored \"-Wunused-function\"") \
+ __attribute__((naked)) static return_type signature \
+ { \
+ __asm( \
+ "svc %0\n" \
+ "bx r14" : : "I" ((uint32_t)number) : "r0" \
+ ); \
+ }
+#elif defined (__ICCARM__)
+#define PRAGMA(x) _Pragma(#x)
+#define SVCALL(number, return_type, signature) \
+PRAGMA(swi_number = number) \
+ __swi return_type signature;
+#else
+#define SVCALL(number, return_type, signature) return_type signature
+#endif
+#endif // SVCALL
+
+#endif // SVCALL_AS_NORMAL_FUNCTION
+#endif // NRF_SVC__
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/s110_nrf51822_7_1_0/s110_nrf51822_7.1.0_API/include/softdevice_assert.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,46 @@
+/*
+ * Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic Semiconductor. The use,
+ * copying, transfer or disclosure of such information is prohibited except by express written
+ * agreement with Nordic Semiconductor.
+ *
+ */
+
+/** @brief Utilities for verifying program logic
+ */
+
+#ifndef SOFTDEVICE_ASSERT_H_
+#define SOFTDEVICE_ASSERT_H_
+
+#include <stdint.h>
+
+/** @brief This function handles assertions.
+ *
+ *
+ * @note
+ * This function is called when an assertion has triggered.
+ *
+ *
+ * @param line_num The line number where the assertion is called
+ * @param file_name Pointer to the file name
+ */
+void assert_softdevice_callback(uint16_t line_num, const uint8_t *file_name);
+
+
+/*lint -emacro(506, ASSERT) */ /* Suppress "Constant value Boolean */
+/*lint -emacro(774, ASSERT) */ /* Suppress "Boolean within 'if' always evaluates to True" */ \
+/** @brief Check intended for production code
+ *
+ * Check passes if "expr" evaluates to true. */
+#define ASSERT(expr) \
+if (expr) \
+{ \
+} \
+else \
+{ \
+ assert_softdevice_callback((uint16_t)__LINE__, (uint8_t *)__FILE__); \
+ /*lint -unreachable */ \
+}
+
+#endif /* SOFTDEVICE_ASSERT_H_ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/Lib/s110_nrf51822_7_1_0/s110_nrf51822_7.1.0_softdevice.hex Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,5280 @@ +:020000040000FA +:10000000C0070000D1060000D1000000B1060000CA +:1000100000000000000000000000000000000000E0 +:100020000000000000000000000000005107000078 +:100030000000000000000000DB000000E500000000 +:10004000EF000000F9000000030100000D010000B6 +:1000500017010000210100002B0100003501000004 +:100060003F01000049010000530100005D01000054 +:1000700067010000710100007B01000085010000A4 +:100080008F01000099010000A3010000AD010000F4 +:10009000B7010000C1010000CB010000D501000044 +:1000A000DF010000E9010000F3010000FD01000094 +:1000B00007020000110200001B02000025020000E0 +:1000C0001FB5C046C04600F0EFFA04B00FB41FBD24 +:1000D00008205A49096809580847382057490968CB +:1000E000095808473C2055490968095808474020E5 +:1000F0005249096809580847442050490968095875 +:10010000084748204D490968095808474C204B4981 +:10011000096809580847502048490968095808479C +:100120005420464909680958084758204349096836 +:10013000095808475C204149096809580847602068 +:100140003E4909680958084764203C49096809582C +:100150000847682039490968095808476C20374919 +:100160000968095808477020344909680958084740 +:100170007420324909680958084778202F490968CE +:10018000095808477C202D490968095808478020EC +:100190002A490968095808478420284909680958E4 +:1001A0000847882025490968095808478C202349B1 +:1001B00009680958084790202049096809580847E4 +:1001C00094201E4909680958084798201B49096866 +:1001D000095808479C201949096809580847A02070 +:1001E0001649096809580847A4201449096809589C +:1001F0000847A8201149096809580847AC200F4949 +:10020000096809580847B0200C4909680958084787 +:10021000B4200A49096809580847B82007490968FD +:1002200009580847BC2005490968095808470000D3 +:1002300003480449024A034B7047000000000020B5 +:10024000C0070000C00700000122D84B5A6000BF61 +:10025000D74A1268002AFBD0016000BFD44A126856 +:10026000002AFBD00022D14B5A6000BFD04A12684E +:10027000002AFBD07047F0B505460E46174600240D +:1002800006E0A200B158A2005019FFF7DDFF641C80 +:10029000BC42F6D30020F0BD0120C043C549086030 +:1002A000401048607047014601229204086890425D +:1002B00001D9102070470020FCE7F0B505460C4638 +:1002C0001646002706E028462168FFF7BDFF2D1DD2 +:1002D000241D7F1CB742F6D3F0BD70B505460C4611 +:1002E0002E460BE0304600F075F9FF2C01D80024B3 +:1002F00001E0FF3C013C012080023618002CF1D1C6 +:1003000070BD0146012292044868904201D909203B +:100310007047A9484069401C01D10F20F8E7002030 +:10032000F6E7FEB504462068030000F037FA05043E +:100330002B4249598B00201DFFF7E3FF0546002D96 +:1003400001D02846FEBDFFF7A7FF0120C00200F044 +:1003500041F9042221469948FFF78DFF002801D07A +:100360000320EFE708222146944800F06DF90028A9 +:1003700006D1002192480068FFF766FF00F00CF9F3 +:100380000320DFE7A768E6686068019031463846D9 +:10039000FFF7A3FF324638460199FFF78EFFB20000 +:1003A0003846019900F050F9002800D1CAE703202F +:1003B000C8E700F0E3F9834800688349086041E03A +:1003C00060680190E668A0680090B200009901980A +:1003D00000F03AF90746002F00D1B3E70E20B1E74D +:1003E000201DFFF760FF0546002D01D02846A9E734 +:1003F0006068002807D1FFF74FFF0320800200F05C +:10040000E9F800F0C9F8FFF747FF0120C00200F04B +:10041000E1F8042221466948FFF72DFF002801D0AA +:1004200003208FE708222146644800F00DF90028D8 +:1004300006D1002162480068FFF706FF00F0ACF823 +:1004400003207FE700BF00207CE770B505460C461F +:10045000182D04D12068FFF764FF206002E001201E +:10046000206000BF00BF70BDF0B589B05248406940 +:1004700003905248806881000398081802900398FE +:10048000000B01900121090302984018401E000B47 +:1004900000900124002520462946019A00F0C4F866 +:1004A0000022401E91410791069001260027304608 +:1004B0003946009A00F0B8F80022401E914105919B +:1004C0000490049BDB43059AD2430698184307998E +:1004D00011430791069037490698086007984860CD +:1004E00009B0F0BD70B53448446934488568466841 +:1004F000AA003146204600F0A7F8002801D00020CD +:1005000070BD0120FCE72D484068002801D0012083 +:1005100000E000200546FFF7E5FF002807D0FFF7C1 +:10052000BBFE0320800200F055F800F035F8FFF71D +:100530009BFF002D0ED020484669204884684768FC +:1005400021463046FFF7C9FE224639463046FFF7BE +:10055000B4FE00BF00F020F810B5184844681A48EF +:100560000460204600F0DCF810BD15480068006803 +:10057000401C01D100BFFEE710480068002802D0EF +:10058000042806D101E0FFF7BEFFFFF7E5FF00BF3B +:10059000FEE700BF00BFFEE7BFF34F8F0B480C49DB +:1005A000C860BFF34F8F00BFFEE7000000E50140C9 +:1005B00000E40140000600400010001000080000A8 +:1005C000B8070000BC070000000000200400FA0586 +:1005D00000ED00E010B50146104B1A6808460223F2 +:1005E0000F4C636000BF0F4B1B68002BFBD0531CEC +:1005F00004D0904202D20A4B186101E0084B986087 +:1006000000BF084B1B68002BFBD00023044C636029 +:1006100000BF044B1B68002BFBD010BD0010001066 +:1006200000E5014000E4014010B5202A04DB01464A +:10063000203A9140002010BD914020239C1A03468F +:10064000E3401943904010BD034610B50B439B0790 +:100650000FD1042A0DD308C810C9121FA342F8D025 +:1006600018BA21BA884201D9012010BD0020C04328 +:1006700010BD002A03D0D30703D0521C07E000208E +:1006800010BD03780C78401C491C1B1B07D1037854 +:100690000C78401C491C1B1B01D1921EF1D118463D +:1006A00010BD70477047704710B500F007F810BDD7 +:1006B000014B1B68DB6818470000002019481A49E5 +:1006C0007047FFF7FBFFFFF7FBFC00BD20BFFDE716 +:1006D0001649174C24688C420BD1164B1B68994263 +:1006E0000CD1154B154A1360186810498842EDD09B +:1006F0000AE0134880F30888124B18470F4A13602A +:1007000018680A498842E1D080F308880E49884277 +:1007100004DD0E48026802210A4302605B68184744 +:100720000346DFE7C0070000C0070000FFFFFFFF30 +:10073000000C000014100010001000000000002049 +:10074000000400206B05000000200020240500406C +:100750000D48704502D1EFF3098101E0EFF3088104 +:10076000886902380078182802D1C046074A104725 +:10077000074A12682C3212681047000000B5054B7A +:10078000054A9B58984700BDFDFFFFFF4B04000042 +:1007900000000020001000000400000030B4744687 +:1007A000641E2578641CAB4204D3635D5B00E318D0 +:1007B00030BC18471D46F8E7000C00000010000090 +:10100000881D0020E14F0100993D0000474F01007D +:1010100000000000000000000000000000000000D0 +:10102000000000000000000000000000515001001E +:101030000000000000000000993D0000993D000004 +:10104000BD500100C3500100993D0000993D0000D2 +:10105000993D0000993D0000993D0000993D000038 +:10106000C9500100993D0000993D0000CF5001009A +:10107000993D0000D5500100DB500100E150010016 +:10108000993D0000993D0000993D0000993D000008 +:10109000993D0000993D0000993D0000993D0000F8 +:1010A000E7500100ED500100993D0000993D00001E +:1010B000993D0000993D0000993D0000993D0000D8 +:1010C00000F002F813F06DFF0CA030C808382418A7 +:1010D0002D18A246671EAB4654465D46AC4201D170 +:1010E00013F05FFF7E460F3E0FCCB646012633421B +:1010F00000D0FB1AA246AB4633431847AC40010070 +:10110000DC400100103A02D378C878C1FAD85207FF +:1011100001D330C830C101D504680C6070470000AD +:101120000023002400250026103A01D378C1FBD803 +:10113000520700D330C100D50B6070471FB5C046C1 +:10114000C04613F0CFFE04B00FB41FBD8269024940 +:1011500081610248104470476111000001000000E5 +:1011600001B41EB400B510F0E7FB01B40198864647 +:1011700001BC01B01EBD0000F0B4404649465246D5 +:101180005B460FB402A0013001B50648004700BF1E +:1011900001BC86460FBC8046894692469B46F0BC01 +:1011A00070470000C1100000401E00BF00BF00BF1C +:1011B00000BF00BF00BF00BF00BF00BF00BF00BF37 +:1011C00000BFF1D17047000070B505460C461646C9 +:1011D00002E00FCC0FC5103E102EFAD2082E02D31B +:1011E00003CC03C5083E042E07D301CC01C5361F2E +:1011F00003E021782970641C6D1C761EF9D270BD45 +:101200008307FF22DB0E9A408907090E99400028C8 +:101210000BDA0007000F0838830828489B001B18CA +:10122000D86990430843D8617047830824489B00DD +:101230001B181868904308431860704710B504469F +:1012400000210120FFF7DCFF00211820FFF7D8FF65 +:1012500000210B20FFF7D4FF02211920FFF7D0FF58 +:1012600002210D20FFF7CCFF02210E20FFF7C8FF5F +:1012700002210F20FFF7C4FF0221C81FFFF7C0FFA4 +:1012800003211620FFF7BCFF03211520FFF7B8FF4D +:10129000204600F019F8002010BD5A210180704747 +:1012A00010B500F03AF810BD0648704710B500F0D0 +:1012B00035F810BD704770477047000000ED00E042 +:1012C00000E400E003F900C330B50446374D95B0A3 +:1012D00007202870A81CFFF7E0FF5920A880344899 +:1012E00001F01CFC0546072000F0DCF929462F48D8 +:1012F00000F08CFA641E072C0AD830216846017071 +:10130000847001F0E0FA002802D009A800F0DDFCAA +:10131000284601F083FE15B030BD7047F8B5234E66 +:101320000446B61E307801270D46002807D0204617 +:1013300060380B2808D8204601F09AFB2BE0602C7F +:10134000F9D01C480860F8BD20466C38032803D843 +:10135000204601F0CFFB1EE0204670381F2803D83E +:10136000204600F037F816E0204690380F2803D8C2 +:10137000204600F0BBF80EE02046A0380F2803D826 +:10138000204600F023F906E02046B0380F2804D8A4 +:10139000204600F000F9286000E02F60602CD2D1D8 +:1013A00028680028CFD13770F8BD00001A0000204F +:1013B000C533000001300000704770477047704728 +:1013C000704770477047704710B5012801D100F091 +:1013D00042FA10BD10B57038030013F09FFE150CD3 +:1013E00012161E22252C33383D41454950555C6468 +:1013F0006C747B8085004A680878114603F093FF7F +:1014000010BD086803F0F7FF10BD0C790B7B8A68EC +:101410000868214603F0FFFF10BD086804F075F866 +:1014200010BD03F03DFC10BD08884A6880B211462B +:1014300004F03AFA10BD0A790888114680B204F027 +:1014400086FA10BD087840B204F091FA10BD088801 +:1014500080B204F0ADFA10BD086804F0BCFA10BD0B +:10146000086804F0CFFA10BD086804F0F8FA10BD5F +:10147000088982B209C9194604F020FB10BD05C9CC +:10148000114604F074FB10BD08884A6880B211460A +:1014900004F08DFB10BD0B7908888A6880B219466C +:1014A00004F0E1FB10BD0B7908888A6880B2194608 +:1014B00004F09AFC10BD08884B688A6880B219460F +:1014C00004F0D8FC10BD08884A6880B2114604F0C8 +:1014D00023FD10BD088880B204F042FD10BD0888CD +:1014E00080B204F062FD10BD012010BD10B590382F +:1014F000030013F013FE09060F161D242C363F4679 +:101500004E0088888A6883B20888194680B205F040 +:101510007DF910BD08884A6880B2114605F0D3F9FC +:1015200010BD08884A6880B2114605F017FA10BD50 +:1015300008884A6880B2114605F04DFA10BD088847 +:101540004B688A6880B2194605F07EFA10BD08899A +:1015500082B2888883B20888194680B205F0B3FA4F +:1015600010BD08894B6882B20888194680B205F020 +:10157000E8FA10BD08884A6880B2114605F018FBE9 +:1015800010BD888882B20888114680B205F0ACFB95 +:1015900010BD012010BD10B5B02805D0B12808D06D +:1015A000B2280BD0012010BD088880B205F08AFE59 +:1015B00010BD088880B205F0B5FE10BD08884B68E4 +:1015C0008A6880B2194605F0BEFE10BD10B5A0387D +:1015D000030013F0A3FD0B070E172028323C434DE8 +:1015E000545D65004B6808788A68194607F0EFF982 +:1015F00010BD88888A6883B20888194680B207F0CF +:10160000FBF910BD08884C68CB688A6880B2214617 +:1016100007F002FA10BD08884B688A6880B2194644 +:1016200007F01CFA10BD8888CB6884B208888A68E5 +:1016300080B2214607F03CFA10BD8888CB6884B29E +:1016400008888A6880B2214607F05CFA10BD0888D5 +:101650004A6880B2114607F090FA10BD088982B23C +:10166000888883B20888194680B207F090FA10BDC6 +:1016700008884A6880B2114607F0ADFA10BD0889A3 +:101680004B6882B20888194680B207F02AFB10BD69 +:1016900008884B688A6880B2194607F0E7FB10BDDE +:1016A000012010BD10B507F0CEFC0FF05FFF00F079 +:1016B00007F810F0ADF808F0C9F908F055F910BDB9 +:1016C00001202B49C00308602A490020087003202C +:1016D0002949800288607047F8B5264D044628786D +:1016E000A04207D0002C05D0002803D023A14D2014 +:1016F00013F023FC2878A04213D02C70032500237C +:101700002349AD021C48002C27D01B4A214E4032F1 +:10171000214F012C06D0022C13D018A16E2013F0FB +:101720000CFCF8BD0B6002230B604E6185601B4909 +:1017300011625762091D91621749091DD162456006 +:10174000F8BD0B6003230B604E610121C90281606B +:10175000134B9362D7624160F8BD0B600B608560EC +:10176000F8BD10B505A1772013F0E7FB10BD000010 +:1017700080E100E02000002000F501407372635C0E +:1017800068616C5F63636D5F6161722E630000006E +:1017900000F500407C01002000F0004000110040F6 +:1017A000488100401CB50446002069460870204668 +:1017B00009F0CAF86946204608F088FF002803D1DE +:1017C000FBA1B62013F0B9FB01A9204608F0DDFE0D +:1017D000002803D1F6A1BB2013F0AFFB68460078C8 +:1017E0001CBD70B5F74D002428462C76203084713E +:1017F000C47113F0A1FC2846403804702030847373 +:10180000847484762C74AC7070BDEAE710B50C4615 +:10181000ED4982888A8042884A80007808700846AC +:101820000A38847008F087FEFFF7DBFF20460AF0D5 +:10183000EFF9E44AE0321146383908461446813857 +:1018400009F0F0F82146E0480BF084FC09F073F849 +:1018500013F072FC10BD10B50120FFF7ADFD10BDF7 +:10186000F8B509F049FDD84DD64C0A3D022802D002 +:10187000207C00287CD0207E0026102819D1A0785A +:10188000002803D0CAA1D14813F057FBCD48E8384F +:10189000817A89070DD50146267160398989E180F1 +:1018A000C17A217281896181C089A0810120A070E3 +:1018B0002676C44F203FB87C002859D1C4486946D9 +:1018C000808908F003FF002805D069466878097808 +:1018D0004018687004E0BD48B5A11D3013F02DFB21 +:1018E000207C002838D0BA488189FF300930406D0B +:1018F0008089814204D0B548ADA1223013F01DFB90 +:10190000B348808908F088FF002804D1AF48A8A117 +:10191000283013F012FB08F0F6FF00281CD0AC486A +:101920008089FFF73FFF697840186870A548403804 +:10193000416D20318A7C012A0DD1A54A3E779289DA +:10194000C287C87C20700120B876207E102801D084 +:10195000282800D1267626746978002908D09C486A +:101960008289FF300930C28601870120B8746E7009 +:1019700009F092FC002805D1207C002802D0A8782C +:1019800001F0F0F8F8BDF8B50F460446FFF768FF20 +:101990008C4D403D28788B4E002813D0002F10D15D +:1019A000307E002804D0FF2081A1C63013F0C5FA94 +:1019B0002C22A91C204613F024F90E2020700020B0 +:1019C00028708FE07F4D203DA87B002818D0002F85 +:1019D000F7D1307E102808D0282806D0002804D05F +:1019E000FF2073A1D23013F0A8FA0120E070E87B49 +:1019F000A070287C60700F2020700020A87371E018 +:101A00000121204608F0B8FF002807D0307C0028CC +:101A100051D13946204608F0AFFFF8BDA97C69488E +:101A20000C38009068480A38002913D0017805293D +:101A300010D2002F56D1491C0170002666700D206F +:101A40002070012028750622A01C009913F0D9F8F7 +:101A5000AE7447E05C4800210A380170B078002875 +:101A600014D0002F3ED1307E002803D050A1594819 +:101A700013F063FA002565700120524920700A2294 +:101A8000091DA01C13F0BDF8B5702BE039462046A7 +:101A90000BF0CAFA002825D1A87C002805D0002F19 +:101AA00020D149480A380178C5E7A87E002802D02D +:101AB000307C002801D00020F8BD002F12D1307EEC +:101AC000002804D08F203AA1800013F036FA0026B7 +:101AD00066700A203B4920700622091FA01C13F0E3 +:101AE00090F8AE760120F8BD10B53648017E002989 +:101AF00008D1007C012805D001210020FFF743FF19 +:101B0000002801D0072010BD012010BD10B5012410 +:101B10000AF0C6F80443FFF7E7FF044308F00CFFA0 +:101B200001462143084610BDF8B51D4614460E4631 +:101B300008F04BFD002807D0684608F051FD00284A +:101B400003D0002C07D101E00120F8BD9B2018A193 +:101B5000800013F0F2F908F0EFFCA04204D21D4817 +:101B600013A1583013F0E9F9009808F05DF93146F7 +:101B7000009808F06BF9E2B22946009808F022FBC1 +:101B800008F040FD002804D19F2009A1800013F037 +:101B9000D4F908F0D3FE0E4800244030417C0029DF +:101BA00002D044740AF067F90948C480CCE7000009 +:101BB0007372635C6C6C5F6374726C2E73302E6333 +:101BC00000000000200300202C00002084060000FC +:101BD000D80100201502000010B50179002908D0B5 +:101BE00001290BD0FF20FE49043013F0A6F9002094 +:101BF00010BD831D42880488022103E042880488C6 +:101C0000831D01212046FFF78FFF10BDF8B51F4649 +:101C100015460E46044609F06FFB022803D0F14832 +:101C2000007C00281FD0F0488089208008F0F4FD57 +:101C3000002803D1EA49ED4813F07FF905246846EE +:101C400008F0F5FD00280ED0009808F037F9307044 +:101C5000022809D0012807D008F029FE641E2406B6 +:101C6000240EECD10020F8BD3946009808F0C2FAE5 +:101C70002880002804D1AF20D949800013F05DF9F5 +:101C800008F015FE002804D1D848D549193013F0C2 +:101C900054F90120F8BD38B50446831D821C6946FD +:101CA000FFF7B4FF00280DD000206071684600786F +:101CB000012808D0022806D0FF20C949253013F09A +:101CC0003CF9012038BD2071FBE700215BE670B5CF +:101CD000C44C0546403C2078002803D1C148007E12 +:101CE000002803D0BE49C24813F027F9287808F02D +:101CF00054FF28780BF079FB0020207101206071DF +:101D00003921E170207070BD70B5B64D0446403D7C +:101D10002878002803D1B348007E002804D0B448B6 +:101D2000AF49183813F009F9AF4E2188B0898842BD +:101D300003D109F0E1FA022807D00220287101201E +:101D400068713821E970287070BD7F207076A648D0 +:101D5000E17820304174A17801740020EEE710B5DD +:101D6000A04C403C207800280BD19E48007E0028E3 +:101D700007D109F0C1FA032803D009F0C1FA0328FA +:101D800004D19A489649653013F0D7F89549002058 +:101D90002031C8712071012060713A21E1702070FA +:101DA00010BD70B58F4C0646403C207800280BD102 +:101DB0008C48007E002807D109F09EFA032803D042 +:101DC00009F09EFA032804D1884885497B3013F036 +:101DD000B4F8844D2035E87908280CD2E87910222F +:101DE000000100196830314600F029FEE879401CF6 +:101DF000E871002000E007202071012060713B2184 +:101E0000E170207070BDF8B5764D0446403D2878ED +:101E1000002803D17348007E002804D0B720704901 +:101E2000C00013F08AF8704F2188B889884203D126 +:101E300009F062FA022801D0022022E03E8C648878 +:101E40007200788CF98B521C944217D3694A514323 +:101E50009200504312F04FFF401EFF2180B2F53137 +:101E6000884200D90846844200D22046711C401C9A +:101E700012F041FF761C7043401E86B2FE85EE8054 +:101E800000202871012068713C21E9702870F8BD9C +:101E9000F8B5544C0546403C2078002803D1514801 +:101EA000007E002804D052484D497E3813F045F892 +:101EB000A878002801D0012804D1A888FF21F53195 +:101EC000884204D94A484649783813F036F8464ED5 +:101ED0002988B089884203D109F00EFA022807D078 +:101EE00002202071012060713621E1702070F8BD60 +:101EF0003D48002720308772A988B18501213176BD +:101F0000A978012900D00021817237484030407CF7 +:101F1000002801D009F0AFFF2771E3E770B5314C1D +:101F20000546403C2078002807D12E48007E002836 +:101F300003D109F0E1F9002804D02D482849A5383B +:101F400012F0FBFF287809F0AEFE0020207101207E +:101F500060713021E170207070BD70B5214C054674 +:101F6000403C2078002803D11E48007E002804D081 +:101F70001F481B490D3012F0E0FF287800280BD0D5 +:101F8000012809D0022807D06878402804D31848CF +:101F90001349143012F0D1FF284609F0A4F90028A3 +:101FA00001D0002000E00C2020710120607134215C +:101FB000E170207070BD70B50A4C0546403C207839 +:101FC000002807D10748007E002803D109F094F9C2 +:101FD000002804D006480249983812F0AEFF0BE002 +:101FE000B01B000020030020D8010020AA0200003E +:101FF0000A060000C40900002978002914D00A2923 +:1020000012D0142910D01E290ED028290CD0322924 +:102010000AD04B2908D0642906D0FF2904D00B2010 +:10202000FD49C00112F089FF284609F0BBFE0020DF +:102030002071012060713321E170207070BD70B596 +:10204000F64C06462078251D002804D12046403055 +:10205000007E002803D0F049F14812F06EFF3146AF +:10206000002008F06FFD2870002804D106223146B8 +:10207000EC4812F0C6FD012060713221E170207041 +:1020800070BD70B5E54C05462078002804D1204687 +:102090004030007E002804D0E148DF49183812F0B3 +:1020A0004CFF00216956042914D0002912D0081DC4 +:1020B00010D0001D0ED0001D0CD0001D0AD0001D38 +:1020C00008D00A3006D0283104D0D548D249163875 +:1020D00012F033FFD448297801700120607131215A +:1020E000E170207070BD10B5CC4C2078002804D170 +:1020F00020464030007E002803D0C749CB4812F06C +:102100001CFF08F019FAE08008F0DEFA20720020C7 +:102110002071012060710521E170207010BDF8B5BB +:10212000BE4C07462034A07B25462035002805D12B +:10213000287E002802D1A878002804D05120B64972 +:10214000000112F0FAFE09F0D7F81026022822D179 +:10215000B7483988808988421DD1B0494839084636 +:102160000A7F6038807A002A03D080070CD40C20C4 +:102170000CE0800708D406200877AD484030407C4A +:10218000002801D009F077FE2E760020E073267437 +:102190000120A073F8BD0220F8E710B59F4C20780D +:1021A000002804D120464030007E002804D09C48FE +:1021B0009949543812F0C1FE002020710E20A07001 +:1021C0000F20E070FF20A0710020C04320819548BF +:1021D000C01D0178A1728188A1814088E081012021 +:1021E0006071207010BD10B58C4C2078002804D18F +:1021F00020464030007E002803D087498D4812F0E9 +:102200009CFE0821A01D0FF04DFA00202071012036 +:1022100060712B21E170207010BD70B57F4D0446B8 +:102220002878002804D128464030007E002804D0B9 +:102230007E487949B83812F080FE7D481022214648 +:10224000303800F0FCFB7A481022A118203800F04A +:10225000F6FB774830380FF02CFB75491022103907 +:102260002C46A81D00F0EBFB002020710E20A07072 +:102270002A20E07001206071207070BDF8B5674CB5 +:1022800005462034A07B26462036002802D1307E29 +:10229000002804D023206049400112F04EFEA978A6 +:1022A000052912D0132910D014290ED015290CD0CD +:1022B0001A290AD0292908D03D2906D03B2904D063 +:1022C0008D205549C00012F038FE28885A498842AE +:1022D00004D953485049E13812F02FFE09F00CF8A8 +:1022E0000C212827022809D151482A888089904248 +:1022F00015D14A484838027E002A01D0E17310E027 +:10230000A97841760121017637760020E0734848AC +:102310004030407C002804D009F0ADFD01E00220EF +:10232000E07327740120A073F8BDF8B53B4F064653 +:1023300038783D1D002804D138464030007E002802 +:1023400004D03C483449D13012F0F7FD3146012029 +:1023500008F0F8FB01242870002807D12F48062236 +:1023600060303146054612F04CFCAC717C71172090 +:10237000F8703C70F8BDF0B52B4F85B0403F3D7A0A +:10238000064626480078002804D13846A038007E4A +:10239000002804D0D3202049800012F0CEFD3078F0 +:1023A000002806D0012804D022481B492C3812F0FE +:1023B000C4FD082D4CD21C4820380190C4693078E7 +:1023C00000283FD0012804D01A4813491E3812F0C3 +:1023D000B4FD294608310120884004430120A8406B +:1023E00020430090B1790D4C0802727969000919F7 +:1023F0001043FF3101318881B01C12F063FC717809 +:1024000000020843A9000919C031C862387A401C8B +:1024100038720199009811E0B01B0000E002002022 +:10242000520500002500002000040020E9060000FD +:10243000D801002079030000FF0E0000C8610020D1 +:10244000207108E029460831012088408443C5E70F +:10245000F748072101710121F5480B224171C27033 +:10246000017005B0F0BD10B5F14C2078002804D102 +:1024700020464030007E002803D0EE49EE4812F09E +:102480005CFD12F059FE00202071012060710A21CC +:10249000E170207010BD10B509F09DFB002804D03C +:1024A000E548E449583812F048FD08F043FA08F0CE +:1024B00026F80AF040FE002804D0BD20DD49800047 +:1024C00012F03BFD08F085FA002804D05F20D949BE +:1024D000C00012F032FD12F02FFED8480024047024 +:1024E000FFF77FF9D2480121047141710222C270C5 +:1024F000017010BD70B5CE4D04462878002804D177 +:1025000028464030007E002804D0CB48C9498F308F +:1025100012F013FD20781F2801D8601C04D1C64892 +:10252000C449903012F009FD002028712078611C08 +:1025300008F022FB012068712021E970287070BD2D +:10254000F8B5BB4C0646207825464035002802D118 +:10255000287E002804D0B848B6499D3012F0EDFC22 +:102560003078012806D0002804D0F720B149800037 +:1025700012F0E3FC012060710C20207130780027FC +:10258000AF4E012808D008F0B7FE032869D008F044 +:10259000B7FE032873D078E008F0AEFE002803D120 +:1025A00008F0AEFE002804D008F0A6FE02283DD0B8 +:1025B0006BE008F04DFA002867D0287C002864D131 +:1025C0009F4802210C300EF0F6FF002806D00F21A4 +:1025D000B089090212F08FFBB18100E0B7810122BE +:1025E0000321974807F02EFE954808F0D3FBB089E9 +:1025F00007F0A4FF002804D18F488E49B93012F0AB +:102600009CFCB089002108F09DF9002804D08A487C +:102610008849BD3012F091FC297F688B09F047FB97 +:10262000002831D084488349C13017E008F068FEA3 +:1026300000282AD1287F002827D0012825D0042867 +:1026400023D008F005FA00281FD0297F688B09F0F5 +:102650002EFB002818D078487649D53012F06DFC52 +:1026600012E0002009F056FA00280ED12771287CCC +:1026700000280AD1B089FFF795F806E0FFE70020AF +:1026800009F048FA002800D127711B20E0700120D2 +:102690002070F8BD70B5664D04462878002804D136 +:1026A00028464030007E002804D0634861498130CC +:1026B00012F043FC20781F2801D8601C04D10F20A1 +:1026C0005C49800112F039FC002028712078611CDF +:1026D00008F066FA012068711A21E970287070BD4F +:1026E000F8B5534D044628780C272E46403600286E +:1026F0000AD1307E002807D108F0FEFD032803D060 +:1027000008F0FEFD032804D14B484A49473012F037 +:1027100014FC6079002801D0012829D1A079002873 +:1027200001D0012824D1A07B002805D0012803D0A6 +:10273000022801D003281BD1607B400718D0628893 +:1027400001208003824202D82188814201D9207968 +:102750000CE02079002804D0022805D0032803D0FB +:1027600004E0202A12D20CE0A0290FD201280DD0BB +:102770002079042805D12088202802D36188884246 +:1027800004D92D482B495D3012F0D7FB2088708387 +:10279000207930776079002802D0012803D00CE03E +:1027A000284A002105E0224A60329079002804D0AE +:1027B0000121204608F050F9074601202F71687169 +:1027C0001821E9702870F8BD70B5194C05462078BD +:1027D000002804D120464030007E002803D015494F +:1027E000194812F0AAFB08F087FD0C2102280ED12F +:1027F00013482A8883899A4228D10246C032137F1F +:10280000002B04D1807E0E2803D00F2801D0217127 +:1028100003E005201077002020710E20A0702E20EC +:10282000E0702888E08001206071207070BD000099 +:10283000E0020020B01B00003E0300000004002066 +:10284000D801002025000020D30400000220E3E787 +:1028500070B5814C05462078002804D120464030D0 +:10286000007E002803D07D497D4812F066FB08F009 +:1028700043FD0C2102280ED17A482A8883899A4286 +:102880001FD10646C036327F002A04D1807E0E2832 +:1028900003D00F2801D0217109E06F481022A91C34 +:1028A0001E3812F0AEF904203077002020710E207F +:1028B000A0702D20E0702888E080012060712070D9 +:1028C000B4E70220F2E710B501780B0012F026FC05 +:1028D0003D878738878758878787873B3E878787E5 +:1028E00051548787878787874228872C3087878737 +:1028F00087348787878787878746874A4E8720243C +:10290000876B5B5F6367876F877E827B77738700E8 +:10291000801CFFF79DFF60E0801CFFF755FF5CE027 +:10292000801CFFF7DDFE58E0801CFFF7B3FE54E08B +:10293000801CFFF705FE50E0801CFFF7DBFD4CE03C +:10294000FFF7A9FD49E0FFF78EFD46E0801CFFF789 +:1029500012FD42E0801CFFF7E8FC3EE0801CFFF720 +:102960008DFC3AE0801CFFF758FC36E0FFF73BFC9B +:1029700033E0FFF712FC30E0801CFFF7D0FB2CE0C7 +:10298000FFF7B1FB29E0801CFFF77BFB25E0801CF3 +:10299000FFF755FB21E0801CFFF70DFB1DE0801CBD +:1029A000FFF7DBFA19E0801CFFF7B8FA15E0801C8E +:1029B000FFF76EFA11E0801CFFF725FA0DE0801C8E +:1029C000FFF7EFF909E0FFF7CAF906E0801CFFF70F +:1029D0009BF902E0801CFFF77AF9012010BD00206E +:1029E00010BD10B51D49204812F0A7FA10BD70B5F2 +:1029F000194A012411461B4D4031030012F08EFB91 +:102A000005191C1C04191C0001220021154807F09F +:102A100019FC11480021483801774177C03809F086 +:102A2000C2F9002804D010480C49D33012F085FABE +:102A3000FCE60C745565F9E608490C48F6E730B534 +:102A4000134606E0CC18203CE47FD51A44555B1EA3 +:102A5000DBB2002BF6D130BDE0020020B01B00003D +:102A6000A7040000D8010020430600004907000029 +:102A700010B56038030012F051FB0A060A0F131854 +:102A80001F262A31363B086800F090FD10BD05C9AD +:102A9000114600F0AAFD10BD086800F044FE10BD0C +:102AA00005C9114600F048FE10BD4B6808788A68D9 +:102AB000194600F053FE10BD4B688A680868194635 +:102AC00000F067FE10BD086800F07CFE10BD0888AD +:102AD0004A6880B2114600F098FE10BD05C9114643 +:102AE00000F0C4FE10BD05C9114600F0FAFE10BD8D +:102AF000012010BD0120704701203F4940060860B9 +:102B00003E4908603E490A68FF231B029A4383122C +:102B10001A430A60384980390860704710B5024688 +:102B20000420384904E0C3005B181B79002B0AD04D +:102B30000346401EC0B2002BF5D133A1432012F052 +:102B4000FCF9FF2010BDC300CA50002259184A7179 +:102B50008A7101220A7110BD2A4A0021C000801822 +:102B60000171704710B50446042803D326A15220F2 +:102B700012F0E3F92348E1000C182079012803D072 +:102B800021A1532012F0D9F96079A179401CC0B27B +:102B9000814200D0607101201749400680310860F1 +:102BA00010BD70B5164800680004800F022803D0DD +:102BB00015A1692012F0C1F9124E194C0325207895 +:102BC000C10088190279012A07D1427983799A4292 +:102BD00003D042798271705880472078401CC0B27F +:102BE0002070042801D30020207028466D1EEDB20D +:102BF0000028E4D170BD000080E100E080E200E048 +:102C000018E400E02C1200207372635C736F635F42 +:102C10007369676E616C6C696E672E6300000000FB +:102C20003C00002010B5EFF31080C407E40F72B62B +:102C3000D6484178491C41704078012801D10FF0F5 +:102C400021F9002C00D162B610BD70B5CF4CE078F0 +:102C500000280AD10125E570FFF7E4FF0FF01AF90B +:102C6000002804D000200FF0EDF8002070BDC84807 +:102C700065714560F9E770B5EFF31080C507ED0F9A +:102C800072B6C24C6078002803D1C2A18F2012F026 +:102C900054F96078401E60706078002801D10FF010 +:102CA000F5F8002D00D162B670BD10B5B748C178F7 +:102CB000002904D000214171C170FFF7DCFF002022 +:102CC00010BD10B504460FF0E5F8B049C9780840CA +:102CD00000D001202060002010BDF8B50246AB4CAA +:102CE0000026A6710820042101251027130012F0E8 +:102CF00015FA0D080A0C0E101214161E2621232593 +:102D00002800257122E0022001E021711EE02071DF +:102D10001CE027711AE02020F9E7012616E0FFF7F2 +:102D200081FF0FF0B7F80028FBD002260EE02171DA +:102D3000A5710BE02771FBE7202000E04020207107 +:102D4000F6E7FF2093A17E3012F0F7F80FF0AEF80F +:102D5000002809D00FF0B0F8B04205D130460FF08E +:102D6000AEF80028FAD024E001208007C5608D4A23 +:102D7000002151608C4A9661854B02225A60856021 +:102D80008A4803690569DB43DB06DB175B1C1027F8 +:102D90003D430561834D00E020BF6F68002FFBD0ED +:102DA000002B03D1076910239F4307617848826095 +:102DB0006960A07900280CD00FF06CF805460EF081 +:102DC000C9FF7B4A002D02D0A260E06001E0E26012 +:102DD000A060002E01D100F0B1F8F8BD10B5044696 +:102DE0000FF05EF8002805D068490120C8704A78C5 +:102DF000521C4A702046FFF770FF10BDF8B5694FAE +:102E0000B8680025012802D1BD600FF01BF8786872 +:102E1000012800D17D60386801265C4C012814D15E +:102E20003D606079002803D000200FF00BF8657139 +:102E30002078002809D00FF02DF8002805D0594837 +:102E4000C038866300060661A670386901282CD157 +:102E50003D6100F068F8012080074661A0790028F4 +:102E600015D00FF017F800900EF074FF00990029AC +:102E700001D0E16800E0A168411A022901DA8A1C48 +:102E800013DC0099002901D0E06000E0A060FFF7AA +:102E9000C9FE0EF0FFFF002806D04248C038866306 +:102EA00000060661A67000E02670F868012819D1B6 +:102EB00000F039F800F037F800F035F8A078002875 +:102EC00004D1FF2033A1053012F037F8FD60A57062 +:102ED0002570FFF7D0FE0EF0B4FA002802D031487A +:102EE000C038C663F8BD10B5284CE078002801D181 +:102EF0000EF0CCFF01208107886100F014F8A07863 +:102F000000280BD0274CE068002803D10EF0D7FF33 +:102F10000028F8D10020E06000F005F800201C49EE +:102F2000C043886010BD08B55020694608806A46D5 +:102F30001088411E11800028F9D108BDF8B5144849 +:102F400019278760174900200860C8600EF0A2FFAB +:102F5000BD0701240D4E002805D01248C0388463F7 +:102F60002C61B47000E03470FFF75CFE08484760E5 +:102F70000D4930798863FFF7D6FFAC61FFF7D3FFC7 +:102F80000849002008616C61F8BD00004000002085 +:102F9000000300407372635C736F635F636C6F6305 +:102FA0006B2E6300000100400005004000ED00E0D2 +:102FB000FFFFFF7F10B510F020F810BD002004497E +:102FC000C863012001218140024A116000BF70479F +:102FD000C01F004080E200E010B504460BF051F83D +:102FE00020460CF066F810BD704770477047704778 +:102FF0007047704770477047704770477047704719 +:1030000010FFFFFFDBE5B151006001005A00FFFF38 +:1030100003B40148019001BD09000020FE49487039 +:10302000704710B5030012F079F8080E050E080875 +:103030000B0B0E1104F06BF810BDFFF7CDFF10BDA8 +:103040000DF0A0FF10BD01F077FE10BDFF20F3A131 +:103050009A3011F072FF10BD7FB5F44905464868FB +:103060008968082301910090F14A1946F1480EF051 +:1030700043FD0024F0480EF05DFD641CE4B2082C12 +:10308000F8D3EB490320803140020CF0E7F8002828 +:1030900003D0E2A1BF2011F050FF1E220221E74819 +:1030A0000AF09FFCE5481E22032110300BF013FAB2 +:1030B000E2480722342174300AF0ECFBDF484C214F +:1030C000283011F0FDFDDD496A46743108464C3860 +:1030D0000164FF317B31416401211172039002F0E0 +:1030E000AAF802A80CF008FC002803D0CBA1D3203A +:1030F00011F023FFCF4802222421A8380AF0CAFB8E +:10310000CC4802222C215C380AF0C4FBCC490B20AD +:103110000EF03AF8002803D0C0A1E02011F00DFF16 +:1031200003F0DEFF03F0E2F904F03EFE6B460022FE +:103130000821C4A001F06EFF002803D0B7A1E7204A +:1031400011F0FBFE284605F049F9002803D0B3A191 +:10315000E92011F0F2FE8521C900BD4811F0B0FD53 +:10316000BB49B24A0020135C0C18401CC0B2E3708B +:103170000428F8D3A849002048608870C8707FBD33 +:1031800070B5B44E0546706A94B00C46401C04D12C +:10319000B06AC0430004000C0BD0306AC007C00FF7 +:1031A0002870706A11F09FFDB06A2071000A60718A +:1031B00014E02B206946087009A968460AF0B0FBA4 +:1031C000002804D0FF2095A10E3011F0B6FE01209A +:1031D000287006220AA9204611F013FD287800283D +:1031E00003D06079C0210843607114B070BDF0B5A0 +:1031F000984C0646206895B00D463746401C083767 +:10320000002808D16068401C05D1A068401C02D18C +:10321000E068401C11D02068314611F064FD606800 +:10322000311D11F060FDA068394611F05CFDE068C9 +:1032300031460C3111F057FD25E02B20694608700E +:1032400009A968460AF06CFB002804D0FF2073A18E +:10325000373011F072FE08220AA9304611F0D1FC75 +:103260002B206946087009A968460AF059FB002816 +:1032700004D0FF2069A13E3011F05FFE08220AA9A8 +:10328000384611F0BEFC20692E46401C0836002846 +:1032900008D16069401C05D1A069401C02D1E069D9 +:1032A000401C12D02069294611F01DFD6069291DBE +:1032B00011F019FDA069314611F015FDE0692946AC +:1032C0000C3111F010FD15B0F0BD2B2468460470D0 +:1032D00009A90AF025FB002804D0FF204FA15C308B +:1032E00011F02BFE082209AF0AA9284611F089FC2B +:1032F0006846047009A90AF013FB002804D0FF20D7 +:1033000046A1633011F019FE0822391D304611F034 +:1033100078FCD8E710B5002108460EF0C3FC002168 +:1033200001200EF0BFFC002102200EF0BBFC0021AA +:1033300003200EF0B7FC002104200EF0B3FC0021A6 +:1033400005200EF0AFFC10BD10B5414CA0780B2845 +:1033500004D3FF2031A1B33011F0EFFD20786021BC +:10336000484300190830002101704178E722C9085C +:10337000C900C91C11404170274A0121917010BD3C +:1033800070B5254CA07800280ED031480025017872 +:10339000491CC9B201700B2900D105708178491C04 +:1033A00081700EF04AFDA57070BD70B51A4C0546CF +:1033B0006068002804D0FF2018A1DC3011F0BDFDAA +:1033C000656070BD70B5144E214DFFF7BDFF71688B +:1033D0000446002907D06022FDF7F6FEFFF7D0FF74 +:1033E00000207060F1E72879002876D011485C3819 +:1033F0000AF060FA6060002804D1FF2007A1FA30CB +:1034000011F09BFD60680AF0B3FA002831D0204625 +:1034100000F03FFF60781FE0340000207372635CAF +:10342000686F73745F636F72652E630048510100AB +:10343000040400200C12002023300000840A002025 +:10344000B41000206E524635313832320000000090 +:103450008C0C002080000010010707D5C008C000B8 +:10346000401C60702879401E287127E0F748616889 +:103470002AE0F64861680AF026FA687900282CD01C +:10348000F2484C380AF016FA6060002804D1872010 +:10349000EF49800011F051FD60680AF06DFA0028D4 +:1034A00016D0204603F072FE6078010709D5C008E7 +:1034B000C000801C60706879401E6871FFF760FF73 +:1034C00083E7E24861684C380AF0FDF97DE704E0E3 +:1034D000DE4861684C380AF0F6F970BDF7B505466C +:1034E0000078002700090C463E46062803D0D8493C +:1034F000D84811F022FD287A00280ED0012814D0D7 +:10350000D448D349213011F018FD0298002C0680D0 +:1035100001D0278066800020FEBD02270926002CEE +:103520000ED0A889A080A87B08E003271426002CD1 +:1035300006D02869E060A88A2082287B2072E4E710 +:1035400002980680E7E770B50E4600211C461980F8 +:103550001546030011F0E2FD0723050B1711231D8B +:10356000230022462946304603F0DCFD70BD22468A +:103570002946304601F051F970BD224629463046B1 +:1035800004F00DFB70BD22462946304602F0E2FFF2 +:1035900070BD224629463046FFF7A0FF70BDAD48FA +:1035A000AB49473011F0C9FC032070BD10B5AA4CDF +:1035B0002178002901D0082010BDFFF74DFD012022 +:1035C0002070002010BD0146A04810B54C380AF00C +:1035D0007AF9A2494879401CC0B24871012803D148 +:1035E0009D484078FFF7BEFA10BDF8B505469C48E7 +:1035F0000F46814208D3002D01D0854204D3E81C38 +:1036000080088000A84201D01020F8BD934881783E +:10361000002911D0398800914178602251430C185B +:10362000083420783B460007000F00222146FFF7B0 +:103630008AFF060004D015E0002038800520F8BD80 +:10364000002D13D039880098814201D90C260DE055 +:1036500020783B460007000F2A462146FFF773FFFC +:10366000060005D00C2E01D0002038803046F8BD71 +:103670007A4D6878401CC0B268700B2801D10020D8 +:103680006870A878401EA87061784807400F02282B +:1036900010D00128EAD16D4861680AF014F9287940 +:1036A000401CC0B228710128E0D16B484078FFF778 +:1036B00059FADBE7C806D9D46068FFF784FFD5E77D +:1036C00070B50446674816460D46814204D16148EC +:1036D0005F49C53011F031FC012E05D05D485C49D1 +:1036E000D53011F02AFC70BD5B480121C170662005 +:1036F000207000202072A581A17370BD70B51646A0 +:103700000D46040001D1FFF71FFE66210170012163 +:10371000017229680161A98881820673002C01D198 +:10372000FFF72EFE70BD4E49884201D2102070472F +:1037300007210170002070474B4A10B5904208D312 +:103740000124A404464AA04201D3904201D39142ED +:1037500001D2102010BD0DF050FD10BD424B10B530 +:10376000994208D30124A4043D4BA14201D39942BC +:1037700001D39A4201D2102010BD022803D0102894 +:1037800001D0092010BD0DF05EFD0028FAD0052003 +:1037900010BD354B10B598420CD30124A404304B16 +:1037A000A04201D3984205D3994203D3002A03D003 +:1037B0009A4201D2102010BD0DF06BFD0028FAD006 +:1037C000072010BD10B50446254894B0844202D2AB +:1037D000102014B010BD01F09AFD002801D0112076 +:1037E000F7E70F2008A9087369460BA80AF098F8B4 +:1037F0000028EED16846007A2070684640896080D3 +:1038000068468089A0800020E3E710B5124C084686 +:10381000E17800290ED000280AD0114A904202D344 +:103820000368934201D2102010BD8288002A03D081 +:10383000012903D0082010BD092010BD04F018FB99 +:103840000028FAD10021E17010BD0000B011002065 +:103850001C3400003E020000340000208C0C0020CC +:1038600000200020FFFF00000060010010B5244A86 +:1038700094B091420DD301229204224B914201D384 +:10388000994206D3441E1E2C24D8914203D3994258 +:1038900001D210209DE701281AD108780024C00722 +:1038A000C00F002803D001206946887001E06846F7 +:1038B000847039206946087009A968460AF030F812 +:1038C000002803D010498C2011F037FB204680E7F8 +:1038D00007207EE70246203A1F2AF9D801F03AFC79 +:1038E00077E7084A10B5914201D21020ACE70246B2 +:1038F000203A1F2A02D801F083FCA5E70720A3E79E +:1039000000600100002000201C3400008107C90E67 +:10391000002808DA0007000F083880082C4A8000C9 +:103920008018C06904E080082A4A80008018006876 +:10393000C8400006800F704710B50D20FFF7E6FF66 +:10394000C4B20420C043FFF7E1FFC0B2844203D0F9 +:1039500021A11A2011F0F1FA10BD0121234A4803D8 +:103960001060234B00221A60224A5160224A1060E4 +:10397000224A11601D4980390860704701211B4AA5 +:10398000480310601D4A5160194A002111601A490C +:103990000860704710B516490868012804D00EA1C8 +:1039A000562011F0CAFA10BD154880680022C0B236 +:1039B0000A600DF09DFE10BD10B50D48016800298C +:1039C000FCD0FFF7E7FF01200B494003086010BD62 +:1039D00000ED00E000E400E07372635C736F635F0E +:1039E00068616C5F726E672E6300000080E100E02A +:1039F00000D1004000D3004080E200E000D0004051 +:103A000000D5004030B40121BC48C9020160CD108E +:103A100005604A030260BA4803681B021B0A036080 +:103A200004680023240A24020460B6480468240AB7 +:103A300024020460B448012444608460B34C2360D1 +:103A40006360A360B24B19601D601A60B14B1960CE +:103A50001A600121016030BC704710B40121A748F1 +:103A6000CC0204600A0202600B060360A6484160B3 +:103A70008160A6490020086048608860A44804600E +:103A80000260036010BC70470121A148C9020160B7 +:103A9000C91001607047002805D0012805D0022810 +:103AA00005D19D4870479D4870479D48704710B5A7 +:103AB0009CA18B2011F041FA002010BD70B50021AF +:103AC0009F4CA04DA04A914B002808D001281DD042 +:103AD000022822D093A1B32011F02FFA70BD01204B +:103AE0000004A060A86011601960984B42109A60B1 +:103AF000974A9060814A001210609648016087489A +:103B00000160954801609548017070BD0120400436 +:103B1000A060A8605160596070BD01208004A06061 +:103B2000A8609160996070BDF8B59446844A854D4F +:103B300000240127754E002808D0012836D002281D +:103B400044D078A1E82011F0F8F9F8BD891E0902E7 +:103B5000090A012000049060346068607A4A1160AC +:103B6000012B21D000217D4A7D4B517061463D31B2 +:103B7000DC63DF637B4B5C6002249C6004241C617B +:103B8000744B196074490F60614B89151960704B53 +:103B900058606048016075487349C16086606B4930 +:103BA000600348601770F8BD0121DCE701205C4E1E +:103BB00040046F4F012B04D134605060686039605D +:103BC000F8BD9060346068603960F8BD0120524EE5 +:103BD0008004684F012BF4D1EEE7674840687047D6 +:103BE00070B54A4D28680026554C012806D1A068BA +:103BF000C00303D501200004A0602E60686801287E +:103C000009D1A068800306D501204004A0606E6041 +:103C100001200FF02EF9A868012809D1A0684003FF +:103C200006D501208004A060AE6002200FF021F9CB +:103C300070BD10B549490878002818D00120434AC2 +:103C4000C0039060424A400090602C4A001210600D +:103C5000404A00201060314A10603F4A10600870EE +:103C60004A78002A02D048700FF003F910BD0320F3 +:103C7000FAE7012041490006086070470120244905 +:103C800000060860704701203C4940050860704705 +:103C900001201F4940050860704731490020C86372 +:103CA00088151B4908607047410A354AC005C00D98 +:103CB0005043801C5143400A0818704710B4314CDF +:103CC000430B63431B0C5C020C602D4C6343C31A13 +:103CD0002D485C0258432A4B400D4343E31A01240C +:103CE000DB0324041B191B1613700A6810180860E4 +:103CF00010BC704710B50FF094F910BD80E100E0E2 +:103D000008E400E018E400E000B0004040B10040EA +:103D100080E200E000E100E048B100404081004066 +:103D200044B100407372635C72656D5F68616C5F83 +:103D30006576656E745F74696D65722E6300000050 +:103D400000B3004040B3004040B5004000F50140E2 +:103D50000083004040850040008200405000002069 +:103D6000C08F0040008500400080004080F5014089 +:103D700044B5004048B5004000B5004000E200E016 +:103D8000093D0000378600006F0C01000E4A1268E2 +:103D90000C498A420AD118470B4A1268094B9A42C9 +:103DA00004D101B50DF0BFFD03BC8E46074909687B +:103DB0000958084706480749054A064B704700005E +:103DC00000000000BEBAFECA1C0100200400002052 +:103DD000881D0020881D002010B5F84C94B0216883 +:103DE000087A002836D017206A46107000A80622EC +:103DF0000931023010F005FF09A9684609F090FD6D +:103E0000112825D02168C0318979062920D00729B9 +:103E10001ED008291CD004291AD0092918D00A2933 +:103E200016D00B2914D0052912D0002803D0E4A104 +:103E3000F42011F082F82168B820405806221C3086 +:103E4000093110F0DEFE2068017A8030806BC17687 +:103E500014B010BD3220C7E770B5D84D04462968AC +:103E60000300C03111F05AF90C077C0B1A212E3BCC +:103E700048515C677080FF20D1A10A306EE08879DC +:103E800001286DD009286BD0052869D00A2867D091 +:103E90000B2865D0FF20CAA10F305FE08879012888 +:103EA0005ED0FF20C6A1163058E08879062857D08A +:103EB000072855D0082853D0052851D0FF20C0A18D +:103EC00019304BE0887909284AD00A2848D00B28B5 +:103ED00046D0042844D0FF20B9A11F303EE08879A5 +:103EE00003283DD007283BD0082839D0092837D0EF +:103EF000FF20B3A1253031E08879062830D00A2888 +:103F00002ED0FF20AEA12B3028E08879062827D0BC +:103F1000072825D00B2823D0FF20A9A12F301DE092 +:103F2000887906281CD00A281AD00B2818D0FF2020 +:103F3000A3A1343012E08879092811D00A280FD0C3 +:103F4000FF209FA1393009E08879092808D00A2884 +:103F500006D0082804D0FF2099A13D3010F0EDFFD5 +:103F60002868C030847170BDFF2095A14230F5E70C +:103F70009249C9220968525CD206920F05D1A0313C +:103F80008A8B824201D1887F70470020704770B5CC +:103F90000446112020700021884D61702968C031CD +:103FA000897A002908D003290ED0042910D0FF20D7 +:103FB00083A16B3010F0C1FF20780009012802D9DD +:103FC0002868807D607070BD0007000F203002E01F +:103FD0000007000F30302070EEE730B503887C49D1 +:103FE0007C4C8B4202D09A1FA2421ED242888A4247 +:103FF00002D0951FA54218D2934216D883887D24FB +:10400000E400A34211D8C088884205D0714D04460F +:104010000A3C2D1FAC4208D2884208D08A4206D002 +:104020005B1C5A43C000824201DD072030BD0020E6 +:1040300030BDFFB50022099B002802D0994205DC63 +:104040005CE0002902D1002004B0F0BD0920FBE7AC +:10405000845C002C12D085186F780D2F4CD010DCAA +:104060003B0011F05BF80A421B2A2A303032323A08 +:104070003A42835C002B3FD1521CD2B28A42F8DB19 +:10408000E1E7122F31D004DC0E2F35D00F2F2CD1C9 +:1040900032E0142F11D0152F27D116E0022CD5D1E4 +:1040A000AB78039C072B237001D25B0701D40A2055 +:1040B000CAE7029B01241B7814E0E343DB0708E016 +:1040C000012C08D011E00620BEE70F2523072D079D +:1040D0005B19002BF4D03046B6E7029B1B789C0797 +:1040E0000AD402242343029C2370835C521C9A1836 +:1040F000D2B28A4204DDA9E70B20A5E71926760291 +:104100008A42A5DB9FE705E00278401C002A01D027 +:10411000002070470A46491E89B2002AF4D10120C6 +:10412000704770B5254D00212868C943A0308183B0 +:1041300000248477214606200DF0B4FD00210520DF +:104140000DF0B0FD002102200DF0ACFD0120FFF7C5 +:1041500083FE2868C030C471047201F062FF70BD34 +:1041600030B5164C95B02268C0329279042A0CD032 +:10417000052A0AD028236A4613705080132906D0D6 +:104180003B2904D0072015B030BD0820FBE7117192 +:10419000104609A909F0C4FB05000BD12068C03006 +:1041A0008179062908D0082906D0072904D00520DE +:1041B000FFF752FE2846E6E70420F9E75400002006 +:1041C0007372635C6761705F636F72652E6300007A +:1041D000FFFF00007B0C000030B587B0040003D067 +:1041E000002107200DF05EFDF74D012128686A4689 +:1041F00001720421117003210C300DF053FA29686B +:104200004022887B8006800E1043887368460BF03E +:1042100094FB00280DD12968098A00290AD0002CB6 +:1042200008D08B000122002107200DF096FC072802 +:1042300002D0032007B030BD0020FBE770B5002599 +:104240000646002803D0002107200DF02BFDDE4C90 +:10425000012120680172062109300DF023FA20683F +:10426000817B8906890E8173FFF7B6FD2068008A7D +:1042700000280AD0002E08D0830001220021072048 +:104280000DF06BFC072802D00325284670BD0025E1 +:10429000FBE7F0B59BB0040003D1CC49CC4810F04B +:1042A0004CFE72202070616800260A780825521F93 +:1042B0000127C548130010F031FF0F097CDFFD7C9A +:1042C0007EFCFBBB7C7C7C7CFAF97C00BE480068F1 +:1042D000C0308079032804D0BD48BC49093010F0B3 +:1042E0002CFE002108460DF0DDFC002107200DF01A +:1042F000D9FC6078B44A28436070106810250146E4 +:10430000C0314B7A2B434B7263689D783C2D4DD066 +:1043100002469D88A032977763688030DB890B80E6 +:1043200063681B8A4B8063685B8A8B8095836168B6 +:10433000826BC97911756168806B0831153006226E +:1043400010F05FFC0620FFF787FD9F48FB23006805 +:104350000146C0318E72027E1A400276B82212588F +:10436000937A9B089B0093724682487A4006400EDF +:104370004872284602F0C0FE002804D094489349B1 +:10438000243010F0DAFD284602F0D0F8002804D0DE +:104390008F488E49273010F0D0FD284603F016FDD7 +:1043A000002806D08A48894929303EE10120FFF7DC +:1043B00053FD1BB0F0BD074600688E88C030807981 +:1043C000062812D0072810D008280ED004280CD0B8 +:1043D00009280AD00A2808D00B2806D0052804D0BE +:1043E0007B487A49353010F0A8FD6078284360702A +:1043F0003868C030417A294341728079092811D048 +:104400000A280FD00B280DD005280BD0FFF789FE06 +:10441000304602F07AFE304602F08EF8304603F065 +:104420000BFDC6E7FFF77DFE0220FFF715FDEFE766 +:104430000068C0308079062812D0072810D00828DC +:104440000ED004280CD009280AD00A2808D00B283E +:1044500006D0052804D05E485C49593010F06DFD47 +:104460006068807902F004FF0028A2D061782943B7 +:1044700061706168C8809CE707460068C030807939 +:10448000062812D0072810D008280ED004280CD0F7 +:1044900009280AD00A2808D00B2806D0052804D0FD +:1044A0004B484A496C3010F048FD04E037E1A1E187 +:1044B00090E090E015E06078284360706068C18803 +:1044C0003868C03001806168098941806168498924 +:1044D0008180002102200DF0E5FB3868C030C671F4 +:1044E00067E706460068C0308079062819D007289B +:1044F00017D0082815D0042893D0092811D00A28ED +:104500000FD00B280DD005288BD031482F49833090 +:1045100010F013FD3068C03080790428ABD0052836 +:10452000A9D03068807C40063AD5606802210C3002 +:10453000FFF7E9FD002833D060680821001DFFF770 +:10454000E2FD00282CD03168B8204058807A8007DE +:1045500008D1CA20405C002808D1488AC20505D588 +:10456000C00703D1488A4022904348824A8A80206B +:1045700082434A822D2268460270BC20425A684615 +:1045800042801022973101A810F03BFB09A9684630 +:1045900009F0C6F90028A3D03D200C49000144E0F1 +:1045A00062683068AC2192890A5261680822091D4C +:1045B000AE3010F026FB10A805743068AE301590B0 +:1045C00014A80BF0BAF9F4E654000020C041000032 +:1045D000260300008F7106460068C03081790629E5 +:1045E00019D0072917D0082915D00429EBD009299B +:1045F00011D00A290FD00B290DD00529E3D0FD20B9 +:10460000FA49800010F099FC3068C03080790428A5 +:10461000D9D00528D7D060688179002902D0807868 +:10462000002805D02320F149400110F086FCC0E6A7 +:104630006078B8212843607030680958897A890702 +:10464000890F012951D1817C09064ED4017E490789 +:1046500001D5042100E00321C03081722B2069467E +:10466000087009A9684609F05BF9002803D0DF4902 +:10467000DF4810F062FC68463168008D88820E22A7 +:1046800010A80274DB48B8221590525808324261D3 +:104690000A4660324260927902700A461432026120 +:1046A000521D82601032C260133A82619632C2613A +:1046B000921C0262473A4262103282621032C26237 +:1046C000473AC263521E0264921F503142648164B1 +:1046D00014A80CF01BFB022815D0002813D0C448E6 +:1046E000C249293010F029FC0DE0817C4906017E89 +:1046F000490701D5042100E00321C0308172002167 +:1047000006200DF0CFFA3068418A0A0602D4402212 +:104710009143418289B280229143418249E6B64861 +:104720000068C0308079032804D0B148AF495730C1 +:1047300010F003FC002108460DF0B4FA0021072018 +:104740000DF0B0FA6078AC4A28436070106810250C +:104750000146C0314B7A2B434B7263689D783C2DE8 +:1047600000D123E602469D88A032977763688030A7 +:10477000DB890B8063681B8A4B8063685B8A8B8054 +:1047800095836168826BC97911756168806B0831A6 +:104790001530062210F035FA0620FFF75DFB96482B +:1047A000FB2301680A46C0329672087E18400876DC +:1047B0004E82507A4006400E5072284602F09CFC11 +:1047C000002804D08A488949723010F0B6FB284688 +:1047D00001F0ACFE002804D085488449753010F003 +:1047E000ACFB284603F0F2FA002897D080487F49B6 +:1047F00077301AE7607828436070DAE500290BD03B +:1048000088807D480068C0300288CA8002880A819A +:1048100042884A81808888817047F7B506460078CB +:104820000C460027010982B03D46012974D0724828 +:1048300000680090C03002296FD0072904D00A29EF +:104840006CD06A496D480DE271680A78521F1300F6 +:1048500010F064FC0F09A451A4A42F585847A4A435 +:10486000A4A4656FA4008A783C2A1BD010271625C3 +:10487000002C7DD08888A0807068A21DC08920820D +:104880007068C089E0817068008A60827068408AC0 +:10489000A082716808460831C07901F0B1FB0020A0 +:1048A000607375E019270725002CE2D00021A17163 +:1048B00071E011270725002CDBD089880091A180A9 +:1048C0007168F7228979A171417A1140417200988B +:1048D00002F01CFC009801F033FE009803F0BAFAD5 +:1048E000D2E101270925002CC3D08888A0807068F8 +:1048F00080792072C8E1888812270E252146FFF7AB +:104900007DFFC1E118270825002CB2D08888A0803F +:10491000A01DFFF73CFBB7E144E0A6E15CE01A27ED +:104920000725002CA5D04888A08070680079A07168 +:10493000AAE18A783C2AB5D010271625002C98D0F9 +:104940008888A0807068C08920827068C089E081F2 +:104950007068008A60827068408AA0827168607B9B +:10496000497D40084000C907C90F0843607300E053 +:1049700093E17168C007497DC00F490849000843A9 +:1049800060737168A21D08460831C07901F038FBD8 +:1049900019480068C030417AEF2273E1A72013491B +:1049A000C0005FE1307A012803D014480F49C838AD +:1049B00058E112270E2570892146FFF71FFF002CB2 +:1049C00092D070784007400F032889D10A480068C8 +:1049D000C030417AFB2255E107490968A031002C1B +:1049E00001D08A8BA280327A921E09E0C041000079 +:1049F00015040000AC12002054000020170600002F +:104A0000130010F08BFB073D4853FDEB6F05FD00D5 +:104A100013270C25002C85D0009900224A82F168CA +:104A200089788907890F0129217A26D04908490008 +:104A30002172FD231940F3689B785B07DB0F5B0055 +:104A400019432172E323E2801940F3681B785B0766 +:104A5000DB0E19432172DF231940F3685B78DB0713 +:104A60009B0E194321726272F1680122C978A1720A +:104A7000017A1143F7221140ADE001231943D7E732 +:104A800015270C25002C9BD0F06806220068A11D7C +:104A90000EF05CFFF8E016270725002C90D0317B44 +:104AA000A171017A08221BE00172EDE014271225A2 +:104AB000002C85D00098A21D8030806B01461531F6 +:104AC000007D01F09DFAB089E081207C012108433E +:104AD000F92108402074FD480068C030017A0222A4 +:104AE0001143E1E717273825002C94D03221A01D6F +:104AF00010F0E4F80020A071207A0321084320720E +:104B0000FB210840F14909680A7E5207D20F920042 +:104B100010432072B8204058807A800757D0A07A7E +:104B20008A7C4008D2074000D20F1043FD2210407B +:104B3000A0728B7CFB229B07DB0F10409B0018436D +:104B4000A0728B7CF7269B07DB0F3040DB001843FD +:104B5000EF231840A072E07A10408A7CD206D20F70 +:104B600092001043E0728A7C3040D206D20FD2000D +:104B70001043E072888AA0812046102267310E30EF +:104B800010F03FF8D149A07F0968C0078A7DC00FA7 +:104B900052001043A0770A7E400852074000D20F0F +:104BA0001043A077084640304DC820344DC4303CF7 +:104BB0003F20405C22463032393101F021FAC348AF +:104BC00000688030806B817A890889008172BF48D3 +:104BD0000068C030017AFB22114065E7327B022A6F +:104BE00018D017273825002C11D0017AFB23194043 +:104BF0000172012A17D0032A22D0042A23D000E010 +:104C00002DE0052A1FD0B249B24810F096F901F004 +:104C100008FA39E019270725002CF8D0898BA180E4 +:104C20000121A17103E00121A1710021E171417A0B +:104C3000CA094906D201890E49000A434272E6E7D1 +:104C40000220A07106E0707B0007000F8030A07189 +:104C5000052A02D00020E071D9E70120FBE79D483A +:104C60009B490C3010F069F90EE0317A00290BD124 +:104C700019270725002C10D0491EA1800021A17101 +:104C8000417AFD22114041720498002C058001D028 +:104C900027806580002005B0F0BD04980580F9E705 +:104CA00010B58A4C94B02068C0308079022809D0B1 +:104CB000032807D0052805D0092803D00A2801D0E9 +:104CC0000B2837D11B2108A8017300218173694685 +:104CD0000BA808F025FE002804D1684640781B2860 +:104CE00002D0032014B010BD002108460CF0DAFFFA +:104CF000002107200CF0D6FF68468078002819D1E3 +:104D00002068C0308079801E030010F007FA0A0680 +:104D10000613081313130D0F1113012000E00420D4 +:104D2000FFF79AF80020DDE70620F9E70720F7E70C +:104D30000820F5E70820D5E770B50025634C00286A +:104D400007D0022817D0072828D062486049793058 +:104D500046E0FFF7A5FF00280CD1FEF7F5FA222167 +:104D600001700572FEF70CFB2068C030417A022208 +:104D70001143417270BDFEF7E7FA12210170012163 +:104D800001722168BC22525A4281C031CD71FEF7B6 +:104D9000F7FA2068C030417A0422E9E72168C6208A +:104DA000405C022809D0032807D0092805D00A282A +:104DB00003D00B2801D00528DCD1887B810901298B +:104DC00011D0800904D043484149703010F0B5F843 +:104DD0000020FFF733FA0028CCD03E483C4974301D +:104DE00010F0ABF870BD0020FFF7F6F9F3E770B5EF +:104DF0000D46040004D137483549813010F09DF844 +:104E00002078012805D0334831499F3010F095F8BB +:104E100070BDA18830482D4E814209D1E28882427E +:104E200006D130681321A030808BFFF799F970BD4F +:104E3000814202D1E08800280AD0122028706878C8 +:104E400008210843687007CC083507C5002106E033 +:104E500000227823114602200CF07FFE02213068E8 +:104E6000C030C17170BD00B5184A87B01268C03239 +:104E7000527AD20907D106236A4613700190117243 +:104E800068460AF05AFD07B000BD00B587B007209C +:104E90006946087068460AF050FDF4E70B48006860 +:104EA000C030807A704738B5084C054602782068D3 +:104EB00013000146C03110F031F909A9061111A300 +:104EC000204E738BA900FEF787FF38BD54000020E9 +:104ED000C0410000F2050000FFFF000088790628AD +:104EE00005D0092803D0FE49FE4810F026F82068B6 +:104EF0000422017E1143017682E0A9880029E4D0D2 +:104F0000A030808BF8498842DFD0A868002804D1FF +:104F1000F448F349103010F010F82068C030407A9F +:104F2000C00904D0EF48EE49113010F006F8A86827 +:104F300006220A38A86000902068AB88A030808BD9 +:104F4000042102F00DF80028BFD0DB20E449C000A6 +:104F50000FF0F3FFB9E788790528B6D92879012839 +:104F600002D0022808D103E0487A80221043487218 +:104F7000487A012210434872284601F05CF8206804 +:104F8000C03080790628A0D9082801D8062004E07E +:104F900009289AD90B2898D80920FEF75DFF94E7D5 +:104FA000887906280AD0042808D0092806D00528C0 +:104FB00004D0CC48CA493D300FF0BFFF0ECDCB48DE +:104FC0000361C2608160A2210170FEF7EEF97CE707 +:104FD0008879062818D0072816D009280DD00A2865 +:104FE0000BD0C048BE4950300FF0A7FF2068C0303A +:104FF0008079062808D0072806D00B20FEF72CFF62 +:10500000284601F018F860E70820F7E7B548B449EA +:1050100064309DE7FFB593B0012468460321847096 +:10502000C9021D4601800AF060F90022694601208C +:1050300003F085F906460AF05CF9002E5CD168465B +:10504000152184704902018000271C2101A80897BE +:105050000FF036FE01200146103108A80170002033 +:10506000014608A841708178F9200140891C21433C +:1050700008A88170684601790226314301711499AC +:105080008185C7851F21018608A80A9013980D9075 +:10509000684609900AF029F90EAA09A901A802F0A8 +:1050A0001CFF07460AF025F9002F02D0384617B03A +:1050B000F0BD8F4F68463968008F4880684684701D +:1050C0008C49018008A88078F9210840801C41089B +:1050D000490008A8817068468685068615A80D9047 +:1050E0000AF003F90EAA09A901A802F0F6FE064685 +:1050F0000AF0FFF8002E01D03046D8E7684639683C +:10510000008F88807B4968468470C91C018029888B +:1051100010A8018069884180A9888180E988C180C0 +:10512000082168468185018610A80D900AF0DDF8F7 +:105130000EAA09A901A802F0D0FE04460AF0D9F887 +:10514000002C01D02046B2E768463968008FC8803D +:105150000020ACE7F0B5684E95B00C46B14235D3AF +:105160000127BF04654DBC4201D3AC422ED3202899 +:1051700004D0212824D0222837D13DE03C216846A4 +:105180000170218841806188818009A908F0C8FBED +:10519000002806D108A98979002904D002290DD058 +:1051A000032015B0F0BD6168B142FAD3B94201D312 +:1051B000A942F6D36A46128D0A80F2E75048F0E71A +:1051C00008684B4C002812D0A84201D21020E8E712 +:1051D00006210EF0A5FB411C07D02168A8225050E3 +:1051E0000120A03188750020DBE70720D9E720687F +:1051F0000021A0308175F6E7084600F028FFD0E7CF +:105200003D4A10B5914206D301229204914204D343 +:105210003A4A914201D2102010BD202805D0212801 +:1052200003D0222803D0072010BD062010BD084659 +:1052300000F042FF10BD70B504462C48CC21AC30C4 +:105240000FF03EFD29482A4EAC3000213060C943A2 +:10525000A0308183002585770120FEF7FDFD3068B1 +:10526000C7210D54E121C57389000182B6210D5477 +:10527000014609310830FDF783FF316808460A7A94 +:1052800060308271062209310FF0BBFC316808469C +:1052900029311930FDF7ABFF002C37D03068803052 +:1052A0008463FEF799FD1E20E081607A8F2108401B +:1052B000303060723068014614312161983161628A +:1052C000933921601031616025721339A162091F81 +:1052D000E1628531E163303921631031616311E0AE +:1052E000C0410000C2060000FFFF00004C12002079 +:1052F00054000020012A000000600100002000206E +:105300000230000010310930A163A06470BDF7487D +:105310000068C0308079042803D0052801D000201F +:1053200070470120704770B50646F1480C4681422F +:1053300006D301208004844204D3EE48844201D283 +:10534000102070BDFFF7E3FF002801D0112070BDD1 +:10535000E948E64D002E02D0012E46D12FE02278FA +:10536000002A0AD00121012A09D0022A14D0032AD6 +:10537000EDD1A2799209EAD112E0002103E0A279ED +:105380009209032AE3D128680622017260308171F4 +:10539000611C0FF036FC05E0A2799209012AD6D1F2 +:1053A00028680172002107200CF07CFC2868062286 +:1053B000611C09300FF025FCFEF70EFD11E021788D +:1053C000002912D0012910D0022910D00329BED102 +:1053D0000120FEF733FF002803D0C849C8480FF06A +:1053E000ACFD2868C673002070BD072070BD012089 +:1053F000FEF7F2FEEFE7BF4910B5884201D2102058 +:1054000010BDBA49024609680B7A0931184600F006 +:10541000F7FD002010BDFFB599B005460020694694 +:105420000871087208A90874144608750122B04969 +:105430009204B0481E46002D05D08D420BD39542F4 +:1054400001D3854207D3002C08D08C4203D3944269 +:1054500004D3844202D210201DB0F0BD2846204360 +:1054600018D01F270CAB01AA009728461A99FEF7FF +:10547000E0FD0028F0D10DAB02AA3146204600978E +:10548000FEF7D7FD0028E7D16846007AC10703D0B0 +:105490000A20E1E70720DFE7800705D568460079A5 +:1054A000800701D50B20D7E7FFF731FF002801D097 +:1054B0001120D1E703AF002D0FD01A2069460873E1 +:1054C0001A9888732946F81C1A9A0FF09AFB0EA9AD +:1054D00003A808F025FA0028BED1002C0ED0202108 +:1054E00068460173867332462146F81C0FF089FB2B +:1054F0000EA903A808F014FA0028ADD17B4908A82A +:105500000968007C08700020A6E7F0B504467848DA +:10551000002695B0844276D301208004844202D3D1 +:1055200074488442F7D32378012B09D1704960680D +:105530008842F0D39904884202D36E498842EAD364 +:105540006A490A681546C035A879022814D003288C +:1055500012D0052810D009280ED00A280CD00B280C +:105560000AD0012803D0002B06D0012B04D0687A82 +:10557000C506AD0F06D101E0082012E6850701D46B +:10558000400701D511200CE6208A5E4F0546203DDC +:10559000BD4207D3012B6ED10028FCD1658A002DB6 +:1055A000F9D111E0022B01D0032B01D1A02862D345 +:1055B000012B01D1002807D01578ED0704D0658AAA +:1055C000002D58D0B42D56D8002B06D0012B08D072 +:1055D000022B04D0032BDED118E0002519E00225B0 +:1055E00017E0002802D1608A00280DD004256068E9 +:1055F000007800280DD001280AD0022808D00328FE +:1056000006D03D48CDE563E00125F0E7032500E045 +:105610000126D07B01281CD1108A002819D0907B4C +:105620008109012911D0800904D035483349EC3073 +:105630000FF083FC0120FEF701FE00280BD030485C +:105640002E49F0300FF079FC05E00120FEF7C4FD93 +:10565000F3E7FEF7C1FB207A002806D0012806D028 +:10566000022806D0032806D106E0002705E001271E +:1056700003E0022701E087E00327002D01D0022D7F +:1056800048D1002F46D0E06800287DD0017900295C +:1056900020D0082978D8027B082A75D800290AD09A +:1056A000134B0168994213D301239B04994202D3FF +:1056B000104B99420CD3002A10D080680C498842C4 +:1056C00006D301218904884208D30A49884205D2B9 +:1056D000102066E5027B002A6AD0DCE703480068F8 +:1056E0000078800710D00448401E5AE5540000207E +:1056F000006001000020002002320000C0410000D4 +:1057000086080000E13F0000022D03D1022F4FD098 +:10571000032F4DD0182168460170218A4180218ACB +:1057200081808571FE480068007A002801D0012838 +:105730007ED16946C8716846067221780930012910 +:1057400023D006210FF0BAFA07216846C173077407 +:1057500009A908F0E5F80028BBD10A2069460870BD +:1057600009A9684608F0DCF80028B2D13A20694659 +:10577000087009A9684608F0D3F80028A9D1002DBF +:1057800009D0022D07D04CE012E061680622491CC6 +:105790000FF037FAD8E7002F43D00026374623E032 +:1057A0000168B00009580978002903D0012904D004 +:1057B0000720F6E469468F7002E001216A46917085 +:1057C000E16806220968095800A8491C03300FF057 +:1057D00018FA0B206946087009A9684608F0A0F875 +:1057E0000028E6D1761CF6B2E0680179B142D7D83C +:1057F00000266F4611E08068B10041581022B81CA5 +:105800000FF0FFF93B206946087009A9684608F0C7 +:1058100087F80028CDD1761CF6B2E068017BB14252 +:10582000E9D81B20694608700120887009A900E0AA +:1058300036E0684608F074F80028BAD108A8407924 +:105840001B282DD12B000FF069FC0504040606046B +:105850001E00032015E0B2480068C03080790300C4 +:105860000FF05CFC091E061E1E0A1E080C0E1E0010 +:10587000022006E0092004E0052002E00A2000E002 +:105880000B20FEF7E9FA012D0CD0608A002809D020 +:1058900000228300114610460CF05FF9002801D069 +:1058A00003207EE400207CE470B586B00C00064640 +:1058B00009D09C48844248D301208004844202D30A +:1058C0009948844241D3964D2868C030C179022955 +:1058D00002D0407A400702D5112006B070BD002CDE +:1058E00004D02046FEF779FB0028F6D13046FEF7BB +:1058F0003FFB012803D0022823D08C48EDE721008C +:105900001BD1082069468882286801ABC08805AA97 +:10591000002103F0F7F80028DFD16846808A0828C4 +:1059200001D00320D9E7684681888181C188C1817F +:10593000018901824189418203A9304601F068FC56 +:10594000CBE7002C01D00620C7E71020C5E770B5D3 +:105950000C460546FEF70CFB012803D0022801D0B7 +:10596000724870BD21462846FEF7FAFB70BD00B5AF +:105970000146143095B0192801D2880707D008468F +:105980001E3004D00A3002D0072015B000BDFFF74A +:10599000BEFC002801D01120F7E7614831220068E1 +:1059A000417068460270817009A907F0B9FFECE701 +:1059B00001B582B0022069460880594802AB0068F0 +:1059C0006A468088002102F00DFF69460988022995 +:1059D00000D003200EBD38B502216A46118052491D +:1059E000884201D2102038BD4D49034609688C8891 +:1059F0000021204603F086F8694609880229F2D082 +:105A0000032038BD3EB50446082069460880454855 +:105A1000844206D301208004844204D34248844255 +:105A200001D210203EBD2046FEF7D7FA0028F9D15A +:105A30002088694688806088C880A0880881E088BE +:105A40004881374801AB00686A46C088002102F0EF +:105A5000C9FE694609880829E4D003203EBD1FB568 +:105A600004460820694688812E48844206D30120D6 +:105A70008004844205D32C48844202D2102004B012 +:105A800010BD27480B46006803AAC088002103F018 +:105A900039F80028F3D169468989082901D0032003 +:105AA000EDE7694609882180694649886180694631 +:105AB0008988A1806946C988E180E0E7FEB50E4685 +:105AC0001849174605468E4206D30122920416480D +:105AD000964203D3864201D21020FEBD1F2F01D96A +:105AE0000C20FEBD0E4C8D4232D3954201D385422F +:105AF0002ED3206801A9408802F026FE0028F0D1AC +:105B0000287869464871206801A9408802F0FFFDA5 +:105B10000028E6D16946009008780221084307E092 +:105B2000540000200060010000200020023000002E +:105B3000694608704979090703D008210843694676 +:105B4000087020686946408802F08BFD0028C8D1A3 +:105B500069460F8120683346408802AA002102F07E +:105B600041FE69460989B942BBD00320FEBD38B564 +:105B70000C46F749002801D0884201D38C4201D25B +:105B8000102038BD21886A461180002801D00029E4 +:105B90000BD0F049034609684D880021284602F0E1 +:105BA000B1FF69460988218038BD0C2038BD30B569 +:105BB0000C46E94987B08C4206D3012189048C4206 +:105BC00005D3E3498C4202D2102007B030BDE14D2D +:105BD0002968C0310A7A520708D48A79521F130003 +:105BE0000FF09CFA05040604040604000820ECE704 +:105BF000497AC90901D00D20E7E7FEF7B9F9012874 +:105C000003D002282DD0D548DFE720881E2801D2F6 +:105C10000720DAE72868C030807906281FD00A20DC +:105C2000FEF71AF905216846017000798108A0780D +:105C30008900C007C00F014368460171FB20014085 +:105C4000A0788007C00F8000014368460171218859 +:105C5000C18009F072FE0028B7D00320B5E7072005 +:105C6000DEE70620B1E7F0B587B014460D46FEF733 +:105C70007FF9012804D0022802D0B84807B0F0BD4F +:105C8000B44B18680146C0310A7AD20707D08A7926 +:105C9000062A04D9092A02D0002D02D050E008209B +:105CA000ECE7AD4A944206D301229204944204D315 +:105CB000A74A944201D21020E0E7A278D206520F00 +:105CC000042A0CD8E378072B09D3102B07D82279A4 +:105CD0009A4204D3102A02D822881E2A01D0072013 +:105CE000CCE702468032966BF727F372966B2379E6 +:105CF0003373966B737A3B40A778BF06FF0FFF00A4 +:105D00003B437372966B2388F381966BA778B37AC3 +:105D1000FF079B089B00FF0F3B43B372FB273B40F1 +:105D2000A778966BBF07FF0FBF003B43B372926B20 +:105D3000A478537AE406DB08DB00640F2343537234 +:105D40000B226B461A70852D22D008DC002D17D04F +:105D5000812D17D0822D17D0832D08D116E0862DE6 +:105D600018D0882D18D0892D18D08A2D18D00B2244 +:105D70001A71B622125C774C002A13D0A83012E0B8 +:105D80000022F5E70122F3E70222F1E70322EFE721 +:105D90000522EDE70622EBE70822E9E70922E7E71B +:105DA0000A22E5E7002002908879072806D0082813 +:105DB00004D00A2804D00B2802D004E0062000E01A +:105DC0000920FEF749F8684609F0B7FD002801D020 +:105DD000032053E720680422C030017A49084900B3 +:105DE00011430172002049E770B55A4E0D463168E3 +:105DF00086B0C031097A1446090701D408206CE541 +:105E0000FEF7B6F8012803D0022801D0534864E514 +:105E1000002D10D05048844206D3012080048442D3 +:105E200004D34B48844201D2102056E5012D0BD0FB +:105E3000022D02D106E0002C01D007204DE5002004 +:105E4000029005E0022000E00120694608710294FA +:105E5000032069460870684609F06FFD002801D0EC +:105E600003203AE53068F722C030017A1140017210 +:105E7000002032E570B594B014460E46FEF778F86F +:105E8000012804D0022802D0344814B070BD314D2E +:105E90002868C030007A800701D40820F5E7002C7C +:105EA00001D00720F1E7FFF732FA002801D01120D6 +:105EB000EBE7002E1DD02D21684601702C68BC2018 +:105EC000015B684641801022B11C01A80EF099FECA +:105ED000207EFB210840B17CC907490F084320768A +:105EE000B07CFF214008A075608A8231084360823F +:105EF00007E02E21684601702868A030818B684633 +:105F0000418009A9684607F00BFD2968FD23C031CF +:105F10000A7A1A400A72B8E710B50C46FEF728F85C +:105F2000012803D0022801D00C4810BD0A48844241 +:105F300006D301208004844204D30548844201D260 +:105F4000102010BD2046FEF722F8002010BD0000F2 +:105F500000200020540000200060010002300000FA +:105F600010B594B00446FEF703F8012804D00228C7 +:105F700002D0644814B0E9E763480068C030817912 +:105F8000042910D005290ED03820694608704C80AD +:105F900001200871487109A9684607F0C1FC002872 +:105FA000E8D00B20E6E70020E4E710B594B0044603 +:105FB000FDF7DEFF012803D0022801D05148D9E7C0 +:105FC00051480068C030817904290DD005290BD0D3 +:105FD0003820694608704C8000200871487109A972 +:105FE000684607F09DFCC5E70020C3E74648006807 +:105FF000C0308079062801D3012070470020704707 +:1060000008B51346002806D040A0006800904879E3 +:106010006A468009105C18700622581C0EF0F1FDCB +:1060200008BD00B587B0012069460870684609F0D0 +:1060300084FC07B000BD10B50446FDF785F9A22128 +:1060400001700ECC08300EC0FDF79AF97EE770B5EE +:106050002D4C054601682068002911D02C4A914238 +:1060600006D301229204914204D32A4A914201D2DA +:10607000102070BD102277300EF0C3FD2068012182 +:106080008030806B01722068A9880182C17B012960 +:106090000CD1807B800901280AD00120FEF7CEF8C0 +:1060A000002803D01C491D480EF047FF002070BD9A +:1060B0000120FEF791F8F3E770B505460068124C31 +:1060C00000281AD01349884201D2102070BD2068E0 +:1060D000B8210958097A012909D0014677312930B8 +:1060E0000AF063FF206801218030806B0172216813 +:1060F0001022286877310EF084FD2068008AA8807D +:10610000002070BD02300000540000200302FF0197 +:106110000060010000200020C041000003030000D7 +:10612000FFB581B001980E46C078174610360E377D +:10613000022809D0032840D005287DD0F2A1F748D5 +:106140000EF0FBFE05B0F0BDCC890A2060430E3096 +:10615000188031230A98002A0380F3D04868008809 +:1061600090800020D0801081097B9481891FCDB25E +:106170001AE030887168388048780A780002104345 +:10618000F880C8788A78000210433881BA1C091D4B +:1061900028460BF058F8002D01D0002802D000202E +:1061A0003871788008360A372046641EA4B2002869 +:1061B000DFD101990020C870C4E7CC890A20604370 +:1061C0000E30188032230A98002A0380BAD048681B +:1061D000002500889080D5801581087B401FC0B2C3 +:1061E0000090948142E0716832880878FA803A79A8 +:1061F000C30752085200DB0F1A43FD231A408307DE +:10620000DB0F5B001A43FB231A404307DB0F9B00A5 +:106210001A43F7231A400307DB0FDB001A43EF236F +:106220001A40C306DB0F1B011A43DF231A40830603 +:10623000DB0F5B011A4300E020E0BF231A40430656 +:10624000DB0F9B011A433A71C00978718A784B7849 +:106250001002184338813A46C91C00980AF0F3FF2F +:10626000002801D0BD703D8008360A372046641EE4 +:10627000A4B20028B7D10198C57063E7087BCC8928 +:10628000801E85B2284608306043103018803423C1 +:106290000A98002A03808FD04868174600889080AB +:1062A0000020D080108194811037E000D581C01982 +:1062B0000CE030883880009878602A467168009831 +:1062C0000EF09FFC009808360837401900902046D1 +:1062D000641EA4B20028ECD16BE7FFB50546C07878 +:1062E00081B00C460A9E03000EF018FF0BA307179F +:1062F00033414F6D8F9D9D9DA300207B174608283D +:1063000006D0032804D085487FA154300EF015FE36 +:1063100004990E20088030200CE0207B17460428CA +:1063200004D07E4878A171300EF007FE04990E204B +:10633000088031203080002F44D060680088B88009 +:10634000607AFF300130F880E08938810020B88120 +:1063500037E0207B1746042804D070486AA18D30AE +:106360000EF0EBFD04990E2008803220E2E7207B3E +:106370001746022804D0694863A1A9300EF0DDFD5C +:1063800004990E2008803320D4E7207B1746042888 +:1063900004D062485CA1C4300EF0CFFD04981021F7 +:1063A000018034203080002F0CD060680088B880D5 +:1063B000607AFF300130F880E08938810020B881B0 +:1063C000F881E870BEE6207B1746052806D006282F +:1063D00004D052484CA1E1300EF0AFFD04981221D8 +:1063E000018035203080002FECD060680088B880B4 +:1063F000607AFF300130F880E0893881E089B88127 +:1064000000203882A988F981DBE7207B174607281E +:1064100004D042483CA1F8300EF08FFD04990E20C4 +:106420000880362086E700962846049B00F02DFD64 +:1064300088E635A13A480EF080FD83E670B5054642 +:1064400000780C46082603000EF068FE124C343427 +:10645000241C380A0A0A0A0A0A0A0A0A0A0A0A4C00 +:106460006878002804D02E4827A12C300EF065FD56 +:10647000002C03D11F2024A1400108E060783043A4 +:10648000607020E0002CF9D17D201FA1C0000EF02B +:1064900054FDF3E7002904D03F201BA100010EF0BA +:1064A0004CFDFCF751FF0446407830436070FCF728 +:1064B00067FF08E01A4814A1473002E0184812A10B +:1064C0004C300EF03AFD002C0AD06078000707D55A +:1064D000932020702046582229460830FAF774FE8F +:1064E000002070BD0E4808A15030EAE710B500202A +:1064F0000C4C0D490346C2008C525218401C000639 +:10650000D370000EF7D010BD7372635C6761747452 +:10651000635F636F72652E63000000005A02000023 +:10652000B3030000FFFF000058000020FE49088070 +:106530000120887000207047FB4900208870704758 +:1065400010B50021F848C94301800021C17007F04F +:1065500021FAD8E7F7B584B00546002768460781D9 +:10656000878068680C46008800F0ECFB0646287AB5 +:10657000032805D0002E03D1EC49ED480EF0DDFCD8 +:10658000297A2046C91E123000900B000EF0C6FD7D +:106590000FF2F1F03D09AA465C6D34B3CDF38B8B5D +:1065A000F000F078012803D0E049AD200EF0C5FCE2 +:1065B000A8896946C0000E30888030200881002CF0 +:1065C00022D068680188A180E7802781A989A181FC +:1065D00000200DE0C100B27909190A74B288CA819D +:1065E00082005219D3894B82128A401C8A8280B25F +:1065F000A1898142EED8D7E002A8009001AB2246E3 +:106600002946304600F0CCFBF1E002A8009001AB37 +:1066100022462946304600F005FCE8E0F0780628DE +:106620001AD0FF20C149223014E068680188A18097 +:10663000E7802781A989A181B188E181E989218247 +:10664000EA89296900982BE0F078062804D0FF2019 +:10665000B6493C300EF071FCE889694612308880FA +:1066600035200881002CE0D1C1E0F078072804D063 +:10667000FF20AE4956300EF060FCA88969460E3006 +:10668000888036200881002CBED068680188A180EF +:10669000E7802781A989A1812046AA890E3029692E +:1066A0000EF0AFFA80E0E8896946123080B23822F5 +:1066B00088800A81002C79D068680188A180E780F1 +:1066C0002781A989A181287A102809D00221A173E4 +:1066D000E9892182EA89296900980EF092FA86E018 +:1066E0000121F4E702A8009001AB2246294630467A +:1066F000FFF716FD7BE0F078082803D08B498D4822 +:106700000EF01BFC14206946888037200881002C7D +:106710006DD068680188A180E7802781A989A1815F +:10672000678227820120A0733EE0F078092804D018 +:1067300080487E4918300EF000FC288A69461430E3 +:10674000888037200881002C51D068680188A1809A +:10675000E78004212781A173A989A181E989218288 +:10676000298A618220462A8A1430696998E702E002 +:1067700038E01CE024E0F0780A2804D06D486B492A +:1067800033300EF0DAFB1420694688803720088108 +:10679000002C2CD068680188A180E7802781052122 +:1067A000A173A78127826782F77020E017E002A813 +:1067B000009001AB224629463046FFF78EFD16E0D9 +:1067C0000D206946392288800A81002C07D00120DB +:1067D000E08055480188A1802781277307E006994A +:1067E000088010E08F205149C0000EF0A6FB6846DB +:1067F000069980880880002C05D068460089208092 +:10680000684680886080002007B0F0BDF7B594B07E +:1068100015460F46149800F0A0FA04000AD0032091 +:1068200000F088FB022802D2E078002804D0112072 +:1068300017B0F0BD4048FBE71720694601260883E2 +:10684000002D0FD00321684601711021018210A88C +:106850000246059004A928460AF01BFD00280DD029 +:106860000720E5E708216846017100210781C94337 +:10687000418105218673C90281810CE0A878A0714D +:106880002888A080684605218673C902818100217D +:106890000781C943418109AA023206A901A807F06C +:1068A000B2F8002802D000F06BFAC1E707A8009008 +:1068B0006846038B04220321149800F051FB002842 +:1068C000B6D1E670B4E770B592B00D0006460ED0B2 +:1068D00000F043FA04000CD0032000F02BFB022848 +:1068E00002D2E078002806D0112012B070BD10202E +:1068F000FBE71148F9E717216846818004210172FE +:10690000298881816988C181012181740B490182B3 +:106910000AAA023201A902A807F075F800280FD0D0 +:1069200000F02EFAE1E700005800002008650000A2 +:106930003C04000063020000023000000228000056 +:1069400008A800906846838804220321304600F09E +:1069500007FB0028C9D10221E170C6E770B592B0EB +:106960000D0006460DD000F0F8F904000BD003200E +:1069700000F0E0FA022802D2E078002805D01120C9 +:10698000B3E71020B1E7FA48AFE7172168468180E6 +:1069900004210172298881816988C1810121817462 +:1069A000F44901820AAA023201A902A807F02BF8D1 +:1069B000002802D000F0E4F997E708A800906846A4 +:1069C000838804220321304600F0CAFA00288CD1C3 +:1069D0000321E17089E770B592B00D0006460DD035 +:1069E00000F0BBF904000BD0032000F0A3FA02284A +:1069F00002D2E078002805D0112076E7102074E755 +:106A0000DB4872E702216846017229888181698822 +:106A1000C181172181800AAA023201A902A806F0C9 +:106A2000F2FF002802D000F0ABF95EE708A8009062 +:106A30006846838804220321304600F091FA00283A +:106A4000DBD10421E17050E7F0B591B015000E469E +:106A500007460ED000F081F904000CD0032000F0AE +:106A600069FA022802D2E078002806D0112011B07D +:106A7000F0BD1020FBE7BE48F9E71721684681808A +:106A800004210172298881816988C181B17881746A +:106A9000318801820AAA023201A902A806F0B3FFD6 +:106AA000002802D000F06CF9E1E708A800906846E1 +:106AB000838804220321384600F052FA0028D6D1F8 +:106AC0000521E170D3E7F7B592B015460E4612984E +:106AD00000F043F904000AD0032000F02BFA02284A +:106AE00002D2E078002804D0112015B0F0BDA048F3 +:106AF000FBE70627002D12D0684607728681C58104 +:106B0000A5801720694688800AAA023201A902A836 +:106B100006F079FF002807D000F032F9E5E70521FB +:106B2000684601728681EBE708A800906846838872 +:106B300004220321129800F013FA0028D5D1E7703F +:106B4000D3E7F7B592B016460D000ED0129800F0BC +:106B500004F904000BD0032000F0ECF9022802D263 +:106B6000E078002805D01120BFE71020BDE780485D +:106B7000BBE7072768460772868117210495818045 +:106B80000AAA023201A902A806F03DFF002802D09D +:106B900000F0F6F8A9E708A8009068468388042268 +:106BA0000321129800F0DCF900289ED1E7709CE7E1 +:106BB000F3B5172091B00C46002915D021780B00B1 +:106BC0000EF0ACFA062B05051A041C2B1520C01E6E +:106BD000E28880B2002A02D0A368002B04D082424F +:106BE00004D90C2013B0F0BD1020FBE7042905D018 +:106BF000A088002811D101E00620F3E7119800F0E9 +:106C0000ACF805000BD02078092701281AD00228FB +:106C100007D0042824D0052835D00720E2E75448BF +:106C2000E0E76846077161880181E1884181A068D9 +:106C300008260390304600F07DF9072829D34C48F8 +:106C4000801CCFE70C216846017161880181E188D1 +:106C50004181A06803900EE0E878002811D118E087 +:106C60000D216846017161880181A1884181E18817 +:106C70008181A06804900326304600F05BF9022869 +:106C8000EAD31120AEE70E2168460171217B017223 +:106C9000F1E717216846018309AA023206A901A873 +:106CA00006F0B1FE002802D000F06AF89AE707A8C3 +:106CB00000906846038B04223146119800F050F989 +:106CC00000288FD12178012907D002298AD00429F0 +:106CD00005D0052905D0032084E7082102E0EF70E4 +:106CE00080E70A21E9707DE730B591B00C46054692 +:106CF00000F033F8002808D0032000F01BF9022828 +:106D000005D31B48801C11B030BD1948FBE70F218B +:106D10006846017104811721018309AA023206A97C +:106D200001A806F070FE002802D000F029F8EAE77A +:106D300007A800906846038B04220321284600F030 +:106D40000FF9E0E70C49884205D00C4909888142D7 +:106D500001D10A4870470020704710B5FFF7F2FFD5 +:106D6000002802D08178C90700D1002010BD0000A2 +:106D70000230000003280000FFFF00005800002040 +:106D8000002806D0012805D0052805D0062805D002 +:106D90000320704711207047082070475C487047F7 +:106DA000FFB583B003980C9EC0781D4614460F466D +:106DB000012803D05749D2200EF0BFF8F889C0004F +:106DC0000E30288030203080387B001FC0B2019008 +:106DD000002C26D078680088A0800020E0802081E8 +:106DE000F889A081002616E0F0000519C01900906E +:106DF0002A4641690E3201980AF025FA002802D08D +:106E000000202874E8810098761C008A6882009827 +:106E1000B6B2408AA882A089B042E5D80399002082 +:106E2000C870F1E4F8B50646C0781F4614460D4612 +:106E3000042804D0FF20374903300EF07EF8A889DB +:106E4000062148430E30388033210698002C0180FB +:106E50001AD068680088A0800020E0802081A9897D +:106E6000A18103460CE01946062251434A1909192B +:106E7000D789CF81977C8F74128A5B1C0A829BB260 +:106E8000A1899942EFD8F070F8BD70B51446054657 +:106E9000142204981A8037220280002C18D04868E7 +:106EA00000260088A080487AFF300130E080C88941 +:106EB0002081C889A0816682E878082809D009283D +:106EC00011D00A2819D0134913480EF036F8EE7085 +:106ED00070BD087B0C2804D00F480E490C380EF00A +:106EE0002CF8012012E0087B0D2804D00A4809493B +:106EF00008380EF022F8042008E0087B0E2804D0A1 +:106F000005480449001F0EF018F80520A073DEE7BD +:106F100003300000086500008203000001460020E5 +:106F2000F74A02E0401C082803D24300D35A8B42A0 +:106F3000F8D1704730B50446F14A0020163A11796D +:106F400053790AE05518AD79A54201D1401CC0B271 +:106F5000491CC9B2102900D100218B42F2D130BDA9 +:106F6000FFB5E74881B0163841790A9C491CCDB27B +:106F70001E46102D00D10025E14816380079A842A0 +:106F800002D1042005B0F0BD0820FFF7D3FF07466B +:106F9000072804D9FF20DBA1A1300DF0CEFF029815 +:106FA000082801D1072F17D001982080301D60805C +:106FB000002060712071E68003982081204606F051 +:106FC000D3FC00280AD0CE48029916384379821D96 +:106FD000995445710020D5E7CF48D3E7FF20C9A1D8 +:106FE000B3300DF0AAFF0320CCE7F0B58DB0044616 +:106FF00000256846057116468C460620FFF79AFF65 +:1070000000281CD121780127C807002801D01329A6 +:1070100017D9684687766178C17602218183C58356 +:1070200004A8009070680C23008805220621FFF751 +:1070300097FF002803D0B3A184200DF07EFF0DB090 +:10704000F0BDAF4816380278002AF8D0427863784D +:107050009A42F4D1012918D0132919D16146062981 +:1070600016D10570002101200AF01CFE6846077148 +:10707000706801886846C1800021C9430181607938 +:1070800022790102114368461AE06146062908D0B8 +:10709000684600790028D2D0314601A8FDF7A7FE46 +:1070A000CDE70570002101200AF0FCFD684607715C +:1070B0006079227901021143684601810021C943A8 +:1070C0004181E9E78E4810B50021163801704A1E4B +:1070D000428041700171417101200AF0E3FD10BD51 +:1070E00010B5FFF7EFFF0020854902464300401C22 +:1070F000CA520828FAD310BD10B50446FFF7E2FFC4 +:107100007F4816384480002010BDDBE770470EB57D +:1071100001216846017081498180C1800021FDF70D +:1071200066FE0EBDF7B505460078002700090C463F +:107130003E46012804D0FF2072A164300DF0FDFE10 +:10714000287A02280CD0FF206EA17A300DF0F5FECF +:107150000298002C068001D0278066800020FEBDAA +:10716000EA89702710460A3086B2002C0BD0686876 +:107170000088A080A8892081E28020460A30296901 +:107180000DF03FFDE4E702980680E7E7F8B54368B5 +:107190000246D9799C79090221435C7A1E7A25023C +:1071A0005C88981D3543241FA1421DD11B79022BF9 +:1071B0001AD1042D19D0052D26D0062D19D0402D19 +:1071C00012D3061D0F4614462846FFF7A7FE0828CF +:1071D0000AD01120207002202072A581E78126614B +:1071E0006078082108436070F8BD001D00F0D9F8F0 +:1071F000F8BD041D0D46FEF7F9FE0028F8D029461B +:107200002046FDF730FEF8BD001DFFF7EEFEF8BD8D +:1072100010B53B4C8AB0163C2278012A26D01223A6 +:107220006A46937363789B1CD373082313820B887D +:1072300053824B8893828B88D382C988118301A99A +:1072400000910C2305220721FFF78AFE00280BD1AD +:107250000022F023114601200AF07FFC012020705B +:107260006078801C607000200AB010BD1120FBE720 +:10727000F8B5234C0027163C0646A51D1BE0607997 +:107280002179884204D187201EA180000DF055FE8F +:107290002079405D042804D0082804D17F1CFFB267 +:1072A00001E0FDF7F2FD2079401CC0B220711028EA +:1072B00001D1002020713046761EF6B20028DED1C2 +:1072C0003846F8BD10B50446402801D2072010BD4D +:1072D000FFF724FE082802D03120000210BD002153 +:1072E000074802E0491C082903D24A00825A002AB2 +:1072F000F8D1082914D049004452002010BD0000E4 +:10730000DA1300207372635C6C326361705F636FC9 +:1073100072652E630000000004300000FFFF0000D3 +:107320000420EBE700B5402801D2072000BDFFF79D +:10733000F5FD082805D000213B4A400011520846BF +:1073400000BD052000BDF0B58BB016460C00074609 +:1073500007D0002E05D06188402904D207200BB049 +:10736000F0BD1020FBE72088002801D0172801D9A4 +:107370000C20F4E70846FFF7D1FD08280FD0258838 +:1073800003A82A46314602300DF03BFC01A80090CC +:1073900062882B4608213846FFF7E2FDDFE705202B +:1073A000DDE7F0B50E46074601468BB014460125D1 +:1073B000304606F0A5FC08281CD100206946088547 +:1073C0000120FFF7B7FD002802D117206946088584 +:1073D00003AB02330AAA39463046009407F0A3F8FB +:1073E000002809D0022818D0032803D00F49FC2018 +:1073F0000DF0A3FD2846B2E76846038D002BF9D0B7 +:1074000001A800906068042200880121FFF7A8FD10 +:107410000028EFD00549E720EAE760780025102131 +:1074200008436070E6E70000DA13002004730000F0 +:10743000002803D08178012939D101E0102070475C +:107440000188FA4A881A914233D01BDCF84A881A1C +:1074500091422ED00BDC00292BD00320C002081A49 +:1074600027D0012825D001210903401A07E001286F +:107470001FD002281DD0FF281BD0FF38013800285C +:1074800015D116E0FF220132811A904211D008DC9A +:1074900001280ED002280CD0FE280AD0FF2806D1E1 +:1074A00007E0012905D0022903D0032901D00020DB +:1074B00070470F20704700B50A2821D008DC030070 +:1074C0000DF02CFE0A1C2024241A24282224261A1B +:1074D000102819D008DC0B2816D00C2814D00D2841 +:1074E0001AD00F2808D111E011280FD0822807D018 +:1074F00084280DD085280DD0032000BD002000BDBC +:10750000052000BDCB4800BD072000BD0F2000BDF9 +:10751000042000BD062000BD0C2000BD70B5002970 +:107520000BD0CB1FFA3B81241E46CDB2112B1BD2B0 +:10753000012805D0022806D009E0002010701DE0C7 +:10754000FF20043001E0FF200330814218D03300D7 +:107550000DF0E4FD11161313161316161316161656 +:1075600013131313161316000846FF3881381F280B +:1075700003D9FF39FE39022902D81570002070BDE9 +:107580001470072070BD00B503000DF0C7FD0604A0 +:1075900006040C080A0C002000BD112000BD0720C5 +:1075A00000BD082000BD032000BD00780207120FB7 +:1075B00004D0012A05D0022A0AD10EE0000907D121 +:1075C00008E00009012805D0022803D0032801D0D3 +:1075D0000720704708700020704706207047002879 +:1075E00007D0012807D0022807D0032807D007209A +:1075F0007047002004E0112002E0212000E031204B +:1076000008700020704738B50C4605004FD0694619 +:10761000FFF7CBFF002822D120880321890288436D +:10762000694609788907090D084320806946681C66 +:10763000FFF7BBFF002812D12188032000038143FC +:10764000684600788007800C01432180A8784007B5 +:10765000820F2020012A03D0022A03D0072038BD40 +:10766000814300E00143218088B20105890F08D0E1 +:10767000012189038843A9780907C90F89030843B1 +:10768000208080B28104890F0AD0A9784004C906FD +:10769000C90F400CC903084320808004800F02D129 +:1076A0002088400403D52088402108432080002002 +:1076B00038BD70B504460020088015466068FFF7A5 +:1076C000A2FF002815D12189A089814210D86168C4 +:1076D000594E8978C90707D0711E884208D83146AB +:1076E0000DF009FB298009E0FF21FF31884201D913 +:1076F0000C2070BDFF30FF30033028806068807838 +:10770000C007A08903D031460DF0F5FA03E0FF3041 +:10771000FF30033081B229802068817847480173A7 +:1077200020684649008820394885002070BD10B582 +:10773000137804785B08E4075B00E40F23431370BD +:10774000FD2423400478A407E40F6400234313704E +:10775000FB24234004786407E40FA4002343137040 +:10776000F724234004782407E40FE4002343137034 +:10777000EF2423400478E406E40F2401234313702C +:10778000DF2423400478A406E40F6401234313702C +:107790000078BF244006C00F2340800103431370CC +:1077A000002906D00878C10701D1800701D5012042 +:1077B00000E00020C0015906490E0843107010BDBA +:1077C00030B50A8803239B0204889A4323059D0F42 +:1077D00002D1A3049C0F01D09B0F00E001239B0268 +:1077E0001A4303230A801B039A4303889804840FD7 +:1077F00002D11805830F01D0800F00E001200003A3 +:1078000002430A8030BDF3B591B00D0018D0119835 +:10781000002818D0122128460DF050FA01A90120A5 +:1078200007F07DFE00242646374677E00229000057 +:107830000128000003300000010200000C140020A9 +:10784000102013B0F0BD0720FBE76846007C01283C +:107850000BD16846C1890520C002081A0AD0012848 +:107860000AD002280CD003280CD0042C0ED0052CF2 +:107870000FD10DE0012400E002246846868908E06B +:10788000032406E068460424878902E0052400E01A +:10789000062468468189119881423FD12C74002EBC +:1078A0003AD00BA800900CAB10220021304607F014 +:1078B000C8FE002820D16846808D2A46C0B20CA997 +:1078C00009F0C1FC002817D1AE81002F24D00BA8ED +:1078D000009006AB13220021384607F0B2FE0028C4 +:1078E0000AD16846808D06A9C01E0331C0B22A1D88 +:1078F00009F0A9FC002801D00320A2E76846817E98 +:10790000427E08021043E881062C05D16846007CBF +:10791000A8726846C0892881002092E701A807F074 +:1079200006FE002891D0FFF7C6FD8AE7002804D0A4 +:10793000012903D0022904D003207047F949C98DD9 +:1079400002E0F8494031C988814201D100207047E6 +:107950000720704730B5F34C0025608B91B0C00B09 +:107960002ED1216900292BD0207B800728D4012229 +:1079700068460271027200224272228B8281A28AC0 +:10798000828204911721018309AA0023023206A9E9 +:1079900001A807F07BF9002803D0FFF7F4FD11B030 +:1079A00030BD207B02210843207307A80090694660 +:1079B0000B8B208804220121FFF7D2FA05460BE049 +:1079C000FBF7C2FC842101700921017218341ECC1E +:1079D0000C301EC0FBF7D4FC2846E0E710B5D14CB4 +:1079E000034621690020002909D0214601221031D7 +:1079F0001846FBF783FE00202061A0820120217B36 +:107A0000F9221140217310BD70B50C4605461C21AA +:107A100020460DF053F900202080002D08D0012DC4 +:107A200004D0C1A1C5480DF088FA70BD062000E061 +:107A30000520A07070BD10B507F050FB10BDFEB55D +:107A40000546007800260C46374603000DF066FB1D +:107A50000C91070C1D962F462F46486C899168683B +:107A60000A38FBF7B0FD89E0002904D0B348AEA185 +:107A70001B300DF062FAFBF767FC044640780821E2 +:107A800008436070FBF77CFC78E0002C04D1BB203D +:107A9000A5A180000DF051FA284601F0A2FA0028B5 +:107AA0006CD06078082108436070022666E0E888A0 +:107AB000694608800190002C04D1A0489AA12F307B +:107AC0000DF03BFA287807281CD10198C00B19D07B +:107AD000944800218171A988818012E003264DE03D +:107AE000002C04D1C52090A180000DF026FA8D480D +:107AF000017B89070BD50069002802D0E888C00BFC +:107B00003CD00226607808210843607036E0291DC9 +:107B10008EC918308EC028380188022601222046DE +:107B2000FBF7CEFD0127EDE7002C04D183487EA1B1 +:107B300064300DF002FA7B480821007B4007C00F3B +:107B40004600607808436070002E17D1287901281C +:107B500002D16879002811D02046FFF73FFF074681 +:107B60000CE0002CCED10D206FA180010DF0E5F9C5 +:107B7000C8E772486CA17A300DF0DFF9002C0CD008 +:107B80006078000709D5002F07D184202070204697 +:107B9000582229460830F9F717FB3046FEBDF7B5E5 +:107BA000027A88B00C46054620460C3004900692B6 +:107BB00016300027921E02903E460A3159481300A3 +:107BC0000DF0ACFA0ADF06E62AE62AE66A98C6E66F +:107BD0004288002A02D052270726DDE051271E26C0 +:107BE000002C7DD06A684F481288A2800122A271C1 +:107BF0008079C0004019C089FFF705FE002877D1C1 +:107C000048488179C9004919C98921818079C00012 +:107C10004019408AA083BFE0688A00900698072830 +:107C200017D1E889C00B14D000985127223086B2B2 +:107C3000002C55D0A8890499FFF7E5FD002857D1FD +:107C400068680088A0800220A071A8892081012096 +:107C500041E000985027203086B2002C40D0A889FF +:107C6000FFF7D1FD002843D168680088A080A8896B +:107C7000E080287A07280AD002202072288AA08370 +:107C80000098E083204669692030009A01E00120D5 +:107C9000F3E70CF0B6FF7FE0698A009101690029E3 +:107CA00002D0E989C90B22D00099512722318EB226 +:107CB00000218171A9898180002C5FD00088A0807B +:107CC000A8890499FFF79FFD002811D10220A07117 +:107CD000A88920810420A072288AE083009801E00E +:107CE0004CE005E020846969009A0298D1E70320FE +:107CF0000BB0F0BD007B400702D55127222601E0E2 +:107D000050272026002C39D06868502F0088A0808A +:107D100016D00220A0712146287B0831FFF774FE9F +:107D20003AE00000EC1300207372635C67617474C6 +:107D3000735F636F72652E6300000000CB0200006A +:107D4000287BA11DFFF760FE0020FFF747FE23E020 +:107D5000A9890089884207D154270626002C0DD016 +:107D600068680088A08017E053270826002C05D0FB +:107D700068680088A080A889E0800DE00A980680E5 +:107D800010E055270726002CF8D00020A07103E052 +:107D9000FD49FE480DF0D1F80A98002C068001D06C +:107DA000278066800020A3E7F9480021017220386F +:107DB00001814181418081718180027BF9235208D8 +:107DC00052001A40027301618182704770B5F04C15 +:107DD00086B0203C208000206080A071A080694691 +:107DE000012007F09CFB102608E001990888024654 +:107DF0001207D20FB043120110430880684607F003 +:107E000096FB0500F1D02069002804D0DF48DE4948 +:107E100033300DF092F8207B800704D5DB48DA4937 +:107E200034300DF08AF8822D04D02846FFF743FB4A +:107E300006B070BD0020FBE7D54810B52038017BA7 +:107E4000012211430173002141808171818006F07C +:107E500019FB10BD10B5CE4C0020C043203C208043 +:107E60000020FFF7BBFD207B40084000207310BDC1 +:107E700070B5C74D0446203D287B800704D5C34814 +:107E8000C1494B300DF059F8287BC00706D128882E +:107E9000C049884202D02869002801D0082070BD5E +:107EA000002C08D0A088162801D2092070BD2068B7 +:107EB0002861A088A882FFF74DFD70BD10B50C4663 +:107EC00007F001FB002804D0C520AF49C0000DF029 +:107ED00034F82046FFF7EFFA10BDF0B5AC4D04467C +:107EE000203591B00020089068820E462882E881F3 +:107EF0002946E8804039088669460883088508864F +:107F000088838882A2480E90007A1746012808D0FC +:107F1000022806D0032804D0042802D0082011B07B +:107F2000F0BD9D498C425FD301208004844202D37E +:107F30009A4A944258D398498E4255D301208004DE +:107F4000864202D3954886424ED36068002814D0FA +:107F50009149884248D301218904884202D38F493C +:107F6000884241D360892189884203D80122520284 +:107F7000914201D90C20D2E7089010AA0CA93046F2 +:107F8000FFF797FB0028CAD106A92069FFF73BFB42 +:107F90000028C4D1206900280CD060788007002810 +:107FA0006846008B03DA8004800F6ED002E0800404 +:107FB000800F6AD16846008B810617D58004800F38 +:107FC000606805D0002811D0744988420CD301E0C4 +:107FD00000280BD07049884206D3012189048842C9 +:107FE00004D36E49884201D2102098E705A9606940 +:107FF000FFF709FB002892D16069002808D0684685 +:10800000808A0105890F01293FD18004800F3CD06F +:1080100007A9A069FFF7F7FA002880D16846808A8F +:10802000800632D46846808B81062ED4A16900294F +:1080300006D00105890F012927D18004800F24D0A3 +:10804000E068002804D0007800281ED01C281CD22C +:108050004F4A611C123220460992FFF768FB032148 +:1080600000208902884301218902411868460D9148 +:108070000185012181744A490182454A0FA91532BF +:10808000306809F006F9002801D0072047E708A862 +:10809000007F3F49C01CC2B26A7100201031FF321C +:1080A00000900190FF3203460291039003320AA927 +:1080B00004A807F0A3F9002827D135482038008EFE +:1080C0000B903348338938303269014612390291B6 +:1080D00000930192039010A90A8873890CA9306853 +:1080E00007F08CF901007DD12948E98811308170B1 +:1080F000090AC1700026009631386A79008E31462F +:10810000099B07F0FAF8002802D0FFF7D4F906E738 +:108110000E98807CC00928D068460D990185012100 +:108120008174292109020182AE81287B617840088F +:10813000C9074000C90F08432873FD210840617832 +:1081400002228907C90F490008432873104800928A +:108150002A30811C0191029000230396114A0AA93A +:1081600004A807F04BF901003CD1606800283BD01F +:10817000206900281ED106A90CA8FFF721FB607812 +:10818000800717D469460FE0287D00002204000014 +:108190000C140020FFFF0000006001000020002000 +:1081A0000328000003020000088B03210903884311 +:1081B00069460883012069468874FD480882208941 +:1081C000FC490CF098FD6268089BFB480192009303 +:1081D00002900A460396002306A904A807F00EF9A8 +:1081E000010000E07EE07DD12078C10601D4800648 +:1081F0002ED568460684606900280DD105A90CA813 +:10820000FFF7DEFA6846808A03218902884301214C +:1082100089024118684681826946888A4821084354 +:108220006946888201208874E14808AA401C0882B7 +:10823000E1490192891C0220DE4A0291009000234C +:108240000396921C05A904A807F0D8F8010063D191 +:108250002078C0072ED068460684A06900280DD17A +:1082600007A90CA8FFF7ACFA6846818B03208002AF +:108270008143012080020918684681836846818B0A +:10828000402001436846818301218174C84908AABE +:10829000891C0182C8480192001D0221C54A009133 +:1082A000029000230396921C07A904A807F0A6F8E1 +:1082B000010031D1E068002832D068460D9901856F +:1082C00001218174BA49C91C0182E16808A80A78B1 +:1082D000027049784170E068418868464184E068EE +:1082E000017900E018E008A80171E0680722C18860 +:1082F00008A84171090A8171AF4808A9801D009240 +:1083000001910290412200230396D2000AA904A8F9 +:1083100007F074F8010003D00B98FFF7CFFDFEE5DE +:1083200003210E98002F017207D0E8883880E88971 +:108330007880288AB880688AF8800020EFE5F0B558 +:1083400001248BB016460F46012802D002281BD10B +:1083500004E0684605218474C90202E06846974932 +:1083600084740182002F11D00321002089028843E8 +:108370000121890241186846018506AA05A93846E7 +:1083800008F087FF002803D00720B1E41020AFE4F5 +:10839000894DB8782E3D287338882F46203F788540 +:1083A0006A46127D0020294606AB00920E310193E9 +:1083B000FF32029103900346FF3203320AA904A858 +:1083C00007F01CF8002802D0FFF775F890E4002EA3 +:1083D00001D0F88D30802C72002089E470B592B005 +:1083E0000446012508A8857075496846018406F091 +:1083F0007CFF002208A90120FFF7A1FF064606F036 +:1084000078FF30003AD120780024C00700283FD000 +:108410001C2168460CF054FC68460178202001437A +:108420006846017008A88570664968460184119401 +:108430000794817FF9200140891C684681770020DC +:1084400001466846017700200146684641770421CD +:108450008185C485018607A80A9011A80D9008A8F7 +:10846000099006F042FF0EAA09A96846FFF735FDFC +:10847000054606F03EFF002D02D0284612B070BD22 +:108480004D486946098F4E3801816946898F41817F +:1084900049482E3804720020F0E7F7B5464E9CB0EC +:1084A00000212E3E0091317A012904D0022902D008 +:1084B00008201FB0F0BD40494E39CA8D824201D01C +:1084C0000620F6E71D98824201D10720F1E73B48DC +:1084D000012110AA9176401C1083002003239B02E7 +:1084E00002469A438B02D31810AA93846A46918459 +:1084F0003549D18410AA9077908317AA0A926A46C8 +:1085000091850C9009A807F031F8002425462746EC +:1085100004A909A807F02DF8002810D082287BD1E3 +:10852000002C7CD0002D7AD010A804814581002435 +:10853000047518A8807812AD012872D07AE06846D8 +:10854000807D002F1FD0012862D16846818A1B4898 +:10855000401C814219D114A800906846408A0EAB95 +:108560001022002107F06DF8002877D110A8008AAA +:10857000042801D006285BD16846018F1D988142EE +:1085800046D10F2095E7012842D16846808A05210F +:10859000C902884202D0491C884239D106484E3867 +:1085A000C18D6846408A814210D101270FE000004A +:1085B00001290000010200003A14002001280000F7 +:1085C00001180000052A0000FFFF00000027002C12 +:1085D00001D0002D0DD01D99884219D114A9009108 +:1085E00004460EAB1022002107F02BF8002835D1ED +:1085F00001E0009D0CE010A8008A022801D010289C +:1086000016D1C0B218AA0EA908F01DFE00280FD17D +:108610006846408A00907BE720E000E001E005200A +:1086200047E72A1D15A918A808F033FE002801D035 +:1086300003203EE710A8007D0023001DC2B210A851 +:1086400002751E98029019A901950394009216A82C +:1086500006F0D4FE002801D102213172FEF72BFF73 +:1086600027E73EB50B46401E84B201AA00211846FA +:10867000FFF75DF806F039FE02A8009001AB012279 +:108680000021204606F039FE044606F032FE684618 +:108690000089012803D0FE49FE480CF04EFC20461C +:1086A000FEF709FF3EBDF0B5FB4E0446307A89B0B7 +:1086B0000F46032804D0042802D0082009B0F0BDDA +:1086C00004AA06A92046FEF7F4FF0500F6D1F248F9 +:1086D00023893830226901461039029100930192B2 +:1086E000039069460A8A638906A9206806F086FE17 +:1086F000002802D0FEF7DFFEE0E7002F03D0E648B7 +:10870000203000893880042030722846D6E738B5FA +:108710000C00054608D00022694606F0ECFF002850 +:1087200004D0FEF7C8FE38BD102038BD694620468B +:10873000FEF769FF0028F8D1A0786946C207D20F7A +:10874000284606F0F3FFECE73EB50C0008D002AA7D +:10875000694606F0D0FF002804D0FEF7ACFE3EBD0F +:1087600010203EBD032120460CF0A8FA6846008880 +:1087700001A90005800FFEF732FF00280BD16846E3 +:10878000007920706846008801A98004800FFEF7F8 +:1087900026FF002801D003203EBD684600796070A6 +:1087A000A278EF20024068460088C10B09010A4305 +:1087B000F7210A404104C90FC9000A43A270F921F8 +:1087C0000A40800601D5012000E0022040006946F1 +:1087D0000243097A50084000C907C90F0843A07036 +:1087E00000203EBDFEB51D4614460E46074606F067 +:1087F0007CFD01A8009022882B463146384606F0C1 +:108800007CFD054668468088208006F072FD28467B +:10881000FEF751FEFEBDF0B50C46002199B00746AB +:10882000684681850D46002C11D0E068002806D0EE +:10883000A06800280BD002886B469A850180A0783A +:10884000012806D0022804D0072019B0F0BD10205E +:10885000FBE72088002807D0401E80B201A906F05F +:108860005EFE002842D136E08C48EEE769468A89F0 +:1088700021888A420BD26846007C002501282CD131 +:108880006846C0898649884227D1012525E08A4269 +:1088900003D1002D2FD06D1C01E0022D02D0032D3D +:1088A0001BD31FE06946097C012916D169467C4B20 +:1088B000CA895B1ED11A9A421DD005DC7948101A6C +:1088C00019D0012809D116E0012914D0FF39013946 +:1088D00003D1032506E00D26B60201A806F027FE07 +:1088E0000028C3D0822804D0002806D0FEF7E3FD7C +:1088F000ABE7022DFAD13046A7E7E068002813D095 +:1089000006F0F3FC0BA800906A46A1882088928D9F +:10891000E36806F0F2FC054606F0EBFC002D19D1E9 +:108920006846A168808D088002980078C00601D54D +:108930005D488AE706F0D9FC0EA800906846808959 +:108940000CAB0222002106F07CFE054606F0D1FCAD +:10895000002D01D02846C9E76846008F022801D0C3 +:10896000032072E7A078012808A8007C03D08007C4 +:108970000ED4082069E7C007FBD00820FEF7DAFA1A +:10898000072802D34548401C5FE70825022001E084 +:1089900002250320694608762188684681831721CD +:1089A000818611AA002302320DA906A806F06EF9ED +:1089B000002802D0FEF7E7FD47E70FA800906846C1 +:1089C000838E042229463846FEF7CAFA3DE770B581 +:1089D000064615460C460846FEF72AFD00280AD131 +:1089E00006F083FC2A4621463046FFF7A8FC0446E1 +:1089F00006F07FFC204670BD70B514460D46064655 +:108A000006F073FC224629463046FFF746FD044631 +:108A100006F06FFC204670BD70B51E4614460D0072 +:108A20001AD0002C18D06168002915D00121FEF75A +:108A30007DFF00280FD12068FEF7FAFC00280AD13C +:108A400006F053FC324621462846FFF746FA044614 +:108A500006F04FFC204670BD102070BD70B5154665 +:108A60000C0023D00221FEF761FF00280ED1206800 +:108A7000FEF7DEFC002809D106F037FC2946204627 +:108A8000FFF711FE044606F034FC204670BD0000DE +:108A9000287D00003E0600000C140020033000007A +:108AA0000328000000280000013400001020EDE73A +:108AB000FEB50746FF481C4615460E46824218D3AF +:108AC000002C01D0844214D3384600F047FA002825 +:108AD0000AD1002C0FD101AA6946384606F00BFED8 +:108AE000002802D0FEF7E7FCFEBD6846008880063D +:108AF00001D41020FEBD23462A4631463846FFF7F2 +:108B000071FEFEBDFFB585B01E4614000F4609D0AC +:108B100003AA02A9059806F0EEFD002804D0FEF78E +:108B2000CAFCCBE51020C9E568460089C00601D51E +:108B3000E148C3E506F0D9FB01A800900023DF4A15 +:108B40003946059806F07DFD054606F0D2FB002D5E +:108B500011D1002E0CD006F0C8FB00200090228816 +:108B600033463946059806F06CFD054606F0C1FB14 +:108B70006846808820802846D1E7002906D0D04B5F +:108B80000A885B899A4201D8CE48704743E610B5FF +:108B900086B004236C46A382C94B1C89002C07D0E5 +:108BA0005B898B4201D2914204D9C64806B010BD00 +:108BB0000620FBE76B4619825A8200210091019141 +:108BC0001C800221997005A9029104A903916946AC +:108BD000FFF721FEEAE7F0B591B00D468120694626 +:108BE000087105F081FC0646002D08D02878B44CA9 +:108BF000012806D0022828D0072011B0F0BD10208F +:108C0000FBE7A98801AAFEF789FC0028F5D1B00787 +:108C100034D568460079002820D1A879C0071DD036 +:108C200006F063FB002000906A892989A088EB6820 +:108C300006F063FB6946087106F05BFB694608793C +:108C400000280BD0FEF737FCD7E7A98801AAFEF76A +:108C500065FC0028D1D1342006420FD0012168469E +:108C60000172017301794173F00609D5A188684644 +:108C70000182A18A01832069059004E00820BCE7F5 +:108C8000A08869460882FAF75FFB05461720694607 +:108C900088830AAA2B46023207A902A805F0F6FF2C +:108CA00007466878000701D5FAF76AFB002F03D062 +:108CB0003846FEF768FCA0E7F00603D5207B0621C6 +:108CC00008432073B00602D50020FEF787FE08A8EF +:108CD000009069468B8B208804220121FEF740F921 +:108CE0008BE7F0B5002695B014460D4600290FD04D +:108CF000022C4FD3A71EBAB270480AF037FE2919CA +:108D00001039CA7B8B7B11021943884242D1BCB215 +:108D100001A9012006F003FC7AE0029F38880107D0 +:108D200076D5002D41D0A9190691CA788B78361DC9 +:108D30001102B6B219438919A1422BD869468A8912 +:108D400006994B7809781B020B439A4222D1C00640 +:108D500023D506F0CAFA07A800900698AB19C17887 +:108D600080780A020699024348780978000208438D +:108D7000002106F0C2FA009006F0BBFA0098002825 +:108D80003ED10698C178827808026946898B1043E3 +:108D9000884202D00B2015B0F0BD0698C1788278C9 +:108DA00008021043801986B22EE0C0062CD50020A0 +:108DB00007AA01461154401C80B21028FAD306F0CD +:108DC00094FA06A80090684600238089102219466C +:108DD00006F037FC0090002803D006F08AFA0098CD +:108DE0000EE00BA86946009088890A8B07AB00212A +:108DF00006F083FA009006F07CFA0098002803D071 +:108E0000FEF759FBC7E703E0388810218843388014 +:108E100001A806F08CFB002800D17EE7284D698868 +:108E2000002921D001226846027602770024447787 +:108E30000184172181850EAA234602320BA906A8B8 +:108E400005F024FF002802D0FEF79DFBA3E70CA845 +:108E5000009069468B8D288804220121FEF780F856 +:108E6000002898D16C8096E7002094E7F0B50024A4 +:108E700087B015460E46002A04D002A9012006F04C +:108E80004EFB4CE0102007B0F0BD039800780007BF +:108E900045D506F02AFA01A8009068460023008A0A +:108EA000064A194606F0CDFB074606F022FA002FC7 +:108EB0002ED109E00020002001340000FFFF000057 +:108EC000EC13002003300000002E23D06846808879 +:108ED000298820183719001D814230D36946098A34 +:108EE0003970090A797069468988B970090AF97078 +:108EF00006F0FBF901A869460090088A8A883B1DA4 +:108F0000002106F09EFB074606F0F3F9002F01D082 +:108F10000320B8E7684680882018001D84B202A8A4 +:108F200006F005FB0028B0D0822802D0FEF7C3FA75 +:108F3000A9E7002E0ED02988A01C814201D20C2066 +:108F4000A1E72246314639480AF010FD3119087070 +:108F5000000A4870A41C2C80002094E700B585B05E +:108F60006946FEF750FC00280AD16846007C0300E1 +:108F70000CF0D4F808052F2F2F2F080805310320F7 +:108F800005B000BD68468078012807D16846008892 +:108F90000321C902401A1CD001281AD068468079E2 +:108FA000012806D16846808815214902401A052803 +:108FB0000FD96846807A012811D168460189292095 +:108FC0000002081A05D0022803D0032801D0042883 +:108FD00005D10F20D4E7164916480BF0AEFF00204C +:108FE000CEE738B5144A0021518003791AE0CC004D +:108FF0002418A46800946C462488250707D5E50644 +:1090000005D5D90008182038C08B508006E06404CC +:1090100006D59171C9000818C0889080012038BD1C +:10902000491CC9B28B42E2D8002038BDFFFF0000C6 +:10903000287D000033020000EC1300200120F949D4 +:109040004006C861704770B5F64D0024AC702846E4 +:109050006C7020304470C4736C61AC72AC6209F007 +:10906000FEFEA861284630300AF098FD002804D0A2 +:10907000FF20EDA13A300BF060FFEF48C463012000 +:109080004006E86170BD70B50125EC4902260E600E +:10909000E949CD63EA49C96A09070ED4E849403174 +:1090A000CB6AE84A53620B6B93624B6BD3628B6B58 +:1090B0001363C96BD30519435163DA49E24CC9699B +:1090C00000282BD001282DD0FF20D7A169300BF02C +:1090D00034FFDE48A063FF20043060632563DC4971 +:1090E000032008602061D849962040314860DA4862 +:1090F000D8494163D649FC390163D649091FC16388 +:10910000D349F03981630320D349000340394860D3 +:10911000D24910204860D248066070BDD1486061D5 +:10912000D14804E0D048E0306061CF48801F01435F +:10913000A161CEE7BB49012008707047B949002002 +:109140000870704770477047BF4940310028086871 +:1091500002D00122104301E040084000086070473F +:1091600070B50C46AF4D01460622E81C0BF049FDD8 +:109170006C7270BDAB48203040787047A94A91703E +:109180005070704770B50D460446082904D9FF2079 +:10919000A5A1C6300BF0D1FE0022B44809E0910031 +:1091A000635809180B6053001B191B8C0B62521C6F +:1091B000D2B2AA42F3D3206BAC494031086070BDF3 +:1091C0000B23DB4310B5C21A9F4998421FD008DC1D +:1091D0001C3222D00A2A20D0142A1CD0182A08D1E6 +:1091E00017E0083011D004280DD0082809D00C2829 +:1091F00005D0FF208CA1F2300BF09FFE10BD0420A3 +:109200000CE000200AE0FC2008E0F82006E0F42052 +:1092100004E0F02002E0EC2000E0D820C86010BD9F +:1092200080482030007B704710B5874CC178616260 +:109230000BF048FD0002E06110BD252808D026286B +:1092400008D0272808D041000A2807D8091D06E0C1 +:10925000022105E01A2103E0502101E0891DC9B275 +:10926000794A916078494031486170476D49486159 +:10927000704770B56B4CA07200F01FFBA07AC0075E +:1092800040D0734D2868800703D467A178480BF05D +:1092900054FEA07A01061DD5800707D5744862A147 +:1092A000801C0BF04AFEA07A000613D520786A4E87 +:1092B000012816D0002804D051205BA1C0000BF07B +:1092C0003CFE6C487061A0693061FF20624901304A +:1092D00040394860A07A800714D52868C00708D1B3 +:1092E00002E06448001FEDE761484FA11A300BF01F +:1092F00024FEA07A4007286801D5042100E0082157 +:109300000843286070BD70B50021464C012561748A +:10931000002807D0012818D002281AD0544842A1AA +:1093200045380BE000F0C9FA52482178001F0129A6 +:1093300007D0002907D011203BA140010BF0FDFD13 +:1093400070BD056070BD456070BD8120FFF791FF65 +:1093500070BD00F0B2FA6069002804D1452032A146 +:10936000C0000BF0EAFD6169A06A40184249C8607C +:1093700039484249403001603E490C31416008148F +:1093800035494039486027482030C57370BDF8B56D +:109390000C2069460870314C6068C006C50F102665 +:1093A000A66034480021FC300161324B01221B1FB2 +:1093B0001A610BE000BF00BF00BF00BF00BF00BFCD +:1093C00000BF00BF6B461A78521E1A706A461278A8 +:1093D000002A02D00269002AECD0016168460078B8 +:1093E000002804D1224810A131380BF0A6FD002D31 +:1093F00000D06660F8BD0B490020C861704710B509 +:109400000BF060FC00021049000AC86310BD0B4954 +:10941000022008607047094902200860104908606E +:1094200070470000481400207372635C68616C5FD1 +:109430007263732E63000000C01F004080E100E0F3 +:109440008000001000170040001500405B0600007F +:10945000001200404480004040F5014000130040ED +:1094600080E200E006010200250003000016004033 +:109470007702000004100040408500404C8100400D +:10948000F74902200860CBE7F6490870C8E710B535 +:10949000F5480AF08BFB002803D0F449F4480BF0A0 +:1094A0004CFD10BD10B5F0480AF098FB10BDF14915 +:1094B0004860B5E7EC4910B53039EF4B0022C86081 +:1094C0005A60896A0818ED49486000F0FDF910BD3E +:1094D000E54810B5C6213038C160E74A0021516027 +:1094E000806AE649C630486000F0EEF910BD012000 +:1094F000E34940028860DC4900203039C860DF4918 +:1095000048608DE7D84900203039886288E7D6481E +:10951000DA493038806AFE30886081E7D749002018 +:1095200088607DE7D7480168102291430160D649E1 +:109530000120886174E7D5490020C861D1480168DD +:109540001022114301606BE700B5FFF7EBFFC6493E +:1095500000203039087400BD00B5FFF7ECFFC249A8 +:1095600001203039087400BDC849CA69012A01D0F8 +:10957000002055E7BF4A403292685206520E5242CE +:1095800002700020C86101204AE7F8B5BF4C20698D +:10959000012806D00021B44830380078012802D0D4 +:1095A00004E04021F7E7E268012A04D000220A43E0 +:1095B000012802D004E02022F9E76168012905D0E2 +:1095C00000211143B24A002802D007E01021F8E739 +:1095D0001368012B02D1E368012B04D000230B4355 +:1095E000002802D007E00823F9E71168002902D11A +:1095F000E168012905D000221A439F4E002802D0BD +:1096000004E00422F8E77168012904D00021114325 +:10961000002802D004E00221F9E76068012829D07F +:1096200000259C480D4301680906090E02D06169B6 +:10963000012900D000218C4F103F397300680006CB +:10964000000E02D0A069012800D0002078738B485A +:109650008068002803D000F03BFA012800D00020E9 +:10966000B8730021E160216161606161A161716095 +:109670002846F8BD0125D4E77B4930394874CFE648 +:10968000F8B5794E0127103EF07B0025002826D042 +:109690007C4C206800902560FFF779FE00982060E0 +:1096A0007A48C5600561456045618561744900146B +:1096B00088603446203C2178734801290BD000296A +:1096C0000BD06B486949B9300BF037FCF573607CFF +:1096D000022879D0F8BD0760F8E74760F6E7FFF7A2 +:1096E00054FF0446604D0020303D68746348426872 +:1096F0006A620068A8622978002909D1A97800293E +:1097000006D05C4B5B681B780B406978994309D0A5 +:1097100000213170E10707D0104602F016FD01214B +:10972000A86A08E03770F5E7A10601D5022102E03A +:10973000A10702D5002102F017FD4E4F79680622DD +:109740000931E81C0BF030FA002807D1687A7968F3 +:109750000978C909884201D1012000E00020707019 +:10976000204600F0BBF83F48C6260078002816D0F7 +:1097700001282AD002283DD003285AD093203B4903 +:10978000C0000BF0DAFB287C002804D028780028E1 +:1097900064D0FFF7C7FE2878002860D086E0A007D5 +:1097A00001D501F0CDFB200703D50120EE6001F0CB +:1097B000EFFB600703D50020EE6001F0E9FBA00697 +:1097C000E1D501F06DFBDEE774E0A00701D503F001 +:1097D00005FF200703D50120EE6003F07EFE600741 +:1097E00003D50020EE6003F078FEA006CBD503F091 +:1097F000FFFDC8E7A007BF27002802DA3C40F9F7C1 +:10980000F5FB200704D53C400120EE60F9F7EDFBA5 +:10981000600704D53C400020EE60F9F7E6FBA006A7 +:1098200002D53C40F9F7E0FB6006ACD5F9F7DFFB69 +:10983000A9E7A00701D5F9F7DDFB200703D5012033 +:10984000EE60F9F7D6FB600703D50020EE60F9F76C +:10985000D0FBA00697D5F9F7CBFB94E71CE01EE000 +:1098600000E100E06000002078140020289400004F +:10987000AD020000001500404081004040850040DE +:1098800000F50140001200400010004000110040AF +:109890000014004040160040FFF74DFE7BE7E868EB +:1098A000002803D0A96A091828484160687C01286B +:1098B00000D00FE7F9F7ACFBF8BD2549032008609D +:1098C000881524498860ABE5224823494030C161AE +:1098D000224981611F4940154860A1E570B50546E0 +:1098E000FFF7EBFF1E4CA17A080701D568071CD4CF +:1098F0001C4AC80605D5507B002802D0907B002862 +:1099000013D0880602D5107800280ED1480602D55B +:109910005078002809D000208A070026002A07DA9C +:109920004A0704D50122227002E00120F4E72670E4 +:10993000CA0709D0AA0705D4890705D5002803D08E +:10994000A80601D4FFF723FDA67270BD4085004034 +:109950000012004000F5014010100040448100401A +:1099600048140020681400202E4800210170417026 +:10997000704770B5064614460D460120F7F7ACFE59 +:1099800028490120284B08709E60DC601D6170BD75 +:10999000F8B504460120F7F79FFE22490120087020 +:1099A00021494C60214900264E600321204D890247 +:1099B000A960204F002C0AD0012C03D01EA140200A +:1099C0000BF0BBFA3E60032080026860F8BD38608F +:1099D00001208002F9E710B51248017800290ED065 +:1099E0000321134A8902916010494A680021002A24 +:1099F00003D0154A1268427000E0417001700020E7 +:109A0000F7F76AFE10BD07480178002907D007481C +:109A10004068002802D00C480068C0B27047407807 +:109A2000704700006100002000F5004000F1004098 +:109A300000F5014000F200407372635C68616C5F86 +:109A400063636D2E6300000000F40040364800217F +:109A50000170417010218170704770B50646144640 +:109A60000D460220F7F738FE01202F492F4A0870D3 +:109A7000E41E14619660556070BD10B50220F7F7C2 +:109A80002BFE29490120087029480021016041600E +:109A900081602849C014486010BD10B5224C207860 +:109AA000002811D001202349C002886000F02EF860 +:109AB0000021002804D0012060701F48006801E0E8 +:109AC00061701020A07021700020F7F705FE10BD16 +:109AD00010B515480178002905D000F017F80028C6 +:109AE00000D0012010BD407810BD10B50E4801789F +:109AF000002909D000F00AF8002803D00E480068B9 +:109B0000C0B210BD102010BD807810BD084801689B +:109B1000002905D04168002902D08068002801D0C2 +:109B200000207047012070476300002000F50040CE +:109B300000F1004000F5014000F4004010B528217C +:109B40000BF0BCF810BD40788006800E704740785E +:109B50008006800EC01C70472820704770B50546EF +:109B600000780A0700090001120F104328700B004B +:109B70000BF0D4FA07050705070509050B000624B5 +:109B800008E00C2406E0222404E00024FEA1582072 +:109B90000BF0D3F96878800980012043687070BDAC +:109BA00000780007000F704710B50622C01C0BF0AC +:109BB00028F810BD0B4610B5C11C062218460BF044 +:109BC00020F810BD10B5062209300BF01AF810BDB0 +:109BD0000B46014610B50622093118460BF011F864 +:109BE00010BD0278BF23C9071A40490E0A4302700C +:109BF000704700784006C00F704702785206520E38 +:109C0000C9010A43027070470078C009704770B5F7 +:109C10000C460546C11C2046062209300AF0F1FF19 +:109C200020784006400E207029784906C90FC901E6 +:109C30000843207070BD70B515460E4604461F2AB5 +:109C400003D9D1A1A9200BF078F920462A46314644 +:109C500009300AF0D6FF6078AD1D80098001A906A1 +:109C6000890E0843607070BD70B5054640780E4699 +:109C70008406A40E062C03D2C3A1B9200BF05DF913 +:109C8000A41FE4B21F2C00D91F2429462246093103 +:109C900030460AF0B6FF204670BD70B515460E4638 +:109CA00004461F2A03D9B8A1CD200BF046F920465F +:109CB0002A46314609300AF0A4FF6078AD1D8009BC +:109CC0008001A906890E0843607070BD70B5044616 +:109CD00040780E468506AD0E062D03D2AAA1DE20E1 +:109CE0000BF02BF9AD1FEDB21F2D03D9A6A1E22079 +:109CF0000BF023F921462A46093130460AF081FF4C +:109D0000284670BD10B504220F300AF07AFF10BD4E +:109D10000B46014610B504220F3118460AF071FFB8 +:109D200010BD10B5032213300AF06BFF10BD0B46B7 +:109D3000014610B50322133118460AF062FF10BD28 +:109D40004176090A81767047817E427E080210437F +:109D50007047C176090A01777047017FC27E080209 +:109D6000104370474177090A81777047817F427FAE +:109D7000080210437047C175090A01767047017ED9 +:109D8000C27D08021043704781757047807D70471F +:109D900020300279C90652095201C90E0A430271E4 +:109DA000704720300079C006C00E7047203002791D +:109DB000D206D20E49010A43027170472030007961 +:109DC0004009704710B505221F300AF01AFF10BD78 +:109DD0000B46014610B505221F3118460AF011FF47 +:109DE00010BD30B5411C837E0A461902D37D447EE6 +:109DF000927D1B0221431343674D827D8C1FAC4231 +:109E000010D8002A0ED0082A0CD88A420AD28B42D7 +:109E100008D8817F427F08021043A91D884201D8DB +:109E2000012030BD002030BD00210A464254491CAB +:109E30002229FBDB70474078C006C00E704740788F +:109E4000C006C00EC01C70472220704710B50278B3 +:109E50008B07920892009B0F1A43027042785209B6 +:109E600052014270012908D0022906D0032905D0E9 +:109E7000FF2045A1A3300BF060F810BD01210A437B +:109E8000427010BD10B502788B07920892009B0FAC +:109E90001A4302704278520952014270012908D0D7 +:109EA000022906D0032905D0FF2037A1BD300BF0D1 +:109EB00044F810BD01210A43427010BD00788007AC +:109EC000800F70470278FB23C9071A40490F0A43E5 +:109ED0000270704700784007C00F70470278F72380 +:109EE000C9071A40090F0A4302707047007800073B +:109EF000C00F70470278EF23C9071A40C90E0A4302 +:109F0000027070470078C006C00F704770B50546F4 +:109F1000C1700B000BF002F90E080A0C0E101212A1 +:109F20000C14141212160C180C2413E0082411E05F +:109F300002240FE017240DE00D240BE0012409E0BA +:109F4000092407E0062405E0452000240EA1C000F6 +:109F50000AF0F3FF6878400940012043687070BD43 +:109F6000C078704770B5044640780E46C506ED0EC1 +:109F70001B2D03D904A109480AF0DFFF6019C01C9A +:109F8000042231460CE000007372635C756C5F70F4 +:109F900064752E63000000007A0C00003A02000095 +:109FA0000AF02FFE70BD70B5044640780E46C50617 +:109FB000ED0E1B2D03D9A049A0480AF0BEFF611980 +:109FC000C91C042230460AF01CFE70BDC171090A8A +:109FD00001727047017AC2790802104370474172DA +:109FE000090A81727047817A427A080210437047E9 +:109FF000C172090A01737047017BC27A08021043DB +:10A0000070474171090A817170478179427908026C +:10A010001043704701717047007970474173090A16 +:10A0200081737047817B427B08021043704730B5D3 +:10A03000411C037A0A46C4791902214353791479E1 +:10A040001B0223437E4D00798C1FAC4210D80028A0 +:10A050000ED008280CD888420AD28B4208D8D07A71 +:10A06000917A00020843A91D884201D8012030BD21 +:10A07000002030BD10B50522001D0AF0C2FD10BD44 +:10A080000B4610B5011D052218460AF0BAFD10BD99 +:10A090004172090A81727047817A427A080210433C +:10A0A0007047017170470079704710B50822001D94 +:10A0B0000AF0A7FD10BD0B4610B5011D0822184679 +:10A0C0000AF09FFD10BD0A7802734978417370470A +:10A0D000027B0A70407B4870704710B508220E3032 +:10A0E0000AF08FFD10BD0B46014610B508220E3157 +:10A0F00018460AF086FD10BD10B5042216300AF08D +:10A1000080FD10BD0B46014610B5042216311846DD +:10A110000AF077FD10BD10B50822001D0AF071FD90 +:10A1200010BD0B4610B5011D082218460AF069FD46 +:10A1300010BD10B504220C300AF063FD10BD0B46B3 +:10A14000014610B504220C3118460AF05AFD10BD24 +:10A15000017170474171090A81717047C171090A23 +:10A160000172704700797047817942790802104383 +:10A170007047017AC2790802104370470171704735 +:10A1800000797047017170470079704710B5082257 +:10A19000001D0AF036FD10BD0B4610B5011D08224A +:10A1A00018460AF02EFD10BD10B50822001D0AF059 +:10A1B00028FD10BD0B4610B5011D082218460AF0F7 +:10A1C00020FD10BD70B515460E4604461B2A04D965 +:10A1D0003720194900010AF0B0FE2A463146E01C3A +:10A1E0000AF00FFD6078E90640094001C90E0843F6 +:10A1F000607070BD70B5054640780E46C406E40E2A +:10A200001B2C04D9DF200C4980000AF096FE224660 +:10A21000E91C30460AF0F5FC204670BD4078C006C7 +:10A22000C00E1B2801D8012070470020704710B5D0 +:10A2300022220AF0E6FC10BD889F000043020000C5 +:10A240007A0C0000FEB50F46044601460646203053 +:10A250002546C031603640350190032F04D0002FD1 +:10A260002DD0012F2BD04BE000206080A080E0801B +:10A2700020816081A082E085E0826874A074E0742F +:10A28000A076E076A073E07320746074019B9874EC +:10A2900001232B74A88228830876E883B070688332 +:10A2A000A873E87320776077019988720199087420 +:10A2B00030727072B0723274B074A883FEBD002028 +:10A2C000A8822883012F52D0E08B0090608C0290EE +:10A2D000C00000990AF00FFD401C80B2E88200998E +:10A2E000192241439202914201DD401EE8827D2005 +:10A2F000000200990AF0FFFC401C3080002F01D0C2 +:10A30000022FDBD10198007AC1060198C90E0172B3 +:10A3100000206873221824218B5C4032D9075B0827 +:10A32000DE07C90FF60F71185B08DE07F60F71180C +:10A330005B08DE07F60F71185B08DE07F60F711871 +:10A340005B08DE07F60F71185B08DE07F60F76185C +:10A350005908891911726A7B401C5118C0B269737F +:10A360000528D7D3002FA9D10020A874FEBD4A7FAD +:10A370002046E030022A12D0097F022913D050A1D2 +:10A3800073200AF0DAFD012000900290E08BA98B87 +:10A39000484300990AF0BDFCA883029898E7818899 +:10A3A00000910089F1E7018A0091808AEDE770B59C +:10A3B00004464034667B0546002E68D0252E66D8BC +:10A3C000002964D03E20405DA27B4843101825211F +:10A3D0000AF091FC0846A1734207C908520F3C4B92 +:10A3E000691820319A5C09798A4367D031460AF0AE +:10A3F00082FC491CCAB2002006E0002804D02918BB +:10A400004031C979511ACAB2291848235B5C93427A +:10A410003AD320310979C943CB07DB17D21A521E30 +:10A420001206120E34D08B07DB17D21A521E1206F8 +:10A43000120E2FD04B07DB17D21A521E1206120E25 +:10A440002BD00B07DB17D21A521E1206120E27D082 +:10A45000CB06DB17D21A521E1206120E23D08B0621 +:10A46000DB17D21A521E1206120E1FD04B06DB1734 +:10A47000D21A521E1206120E1BD00906C917511A03 +:10A48000491E0A06120E17D0401C0528B5DB70BD08 +:10A49000C00013E0C000401C10E0C000801C0DE0B4 +:10A4A000C000C01C0AE0C000001D07E0C000401D45 +:10A4B00004E0C000801D01E0C000C01DE07370BD5D +:10A4C0007372635C6C6C5F7574696C2E6300000062 +:10A4D0005451010010B5FF48002101704170817096 +:10A4E000C17041718171C171083009F057FB0028BA +:10A4F00004D0FF20F8A184300AF01FFD10BD10B574 +:10A50000F44900204872081D09F048FB002804D0D7 +:10A51000FF20F1A1C3300AF010FDFFF7DBFFF14887 +:10A52000FFF782FC0021EF48FFF7E4FC0121ED4832 +:10A53000FFF78CFC10BDE2E71B207047E5494A7A23 +:10A54000002A01D0002070474881012048727047DE +:10A5500010B5E0494A7A002A02D04989814201D0E7 +:10A56000002010BDDB48001D09F020FB002804D0AE +:10A57000FF20D9A1B4300AF0E0FCD648001D09F054 +:10A580002DFBFFF7A7FF012010BD70B5D14C0025B2 +:10A59000627A002A02D06289824201D00D700DE0F9 +:10A5A000227863789A4203D322786378D21A04E03F +:10A5B00062782378D21A10239A1A0A70FFF7C8FF1C +:10A5C000002801D06572012070BDC2494A7A002A74 +:10A5D00004D04989814201D1012070470020704791 +:10A5E000BC490A784B78521C1207120F9A4207D0C6 +:10A5F000097822225143BC4A891801600120704722 +:10A6000000207047B34801784278491C0907090FB8 +:10A61000914206D00178491C0907090F01700120F9 +:10A62000704700207047AB494A7A002A04D0498914 +:10A63000814201D10120704700207047A5490A7866 +:10A640004B789A4207D0497822225143A64A89186A +:10A650000160012070470020704710B59D4C2078A4 +:10A660006178884216D06078401C0007000F607047 +:10A67000201D09F09BFA002804D0E078401CE0700F +:10A68000012010BDA078401CA0709248001D09F068 +:10A69000A5FAF5E7002010BD8E4801784078814288 +:10A6A00001D101207047002070478A480178427824 +:10A6B000914202D30178407803E041780078081A8B +:10A6C0001021081AC0B270470F20704770B5814C36 +:10A6D0000D46617A002916D06189814213D1002686 +:10A6E0002E70201D09F062FA002805D1A07828708C +:10A6F000A670201D09F072FA2878E17840182870B9 +:10A70000E670012070BD002070BD76490160704781 +:10A7100070494A7A002A04D04989814201D1012036 +:10A720007047002070476B494979002901D000200B +:10A7300070476E49016001207047664841790029E1 +:10A7400001D00020704701214171084670476149DE +:10A750004A7A002A04D04989814201D101207047F8 +:10A76000002070475B494979012901D000207047DA +:10A770005E4901600120704756484179012901D0A6 +:10A7800000207047002141710120704751484079F5 +:10A79000012801D001207047002070474D494A7AB6 +:10A7A000002A04D04989814201D10120704700204C +:10A7B000704770B5474C0546A0790721401C0AF048 +:10A7C0009AFAE079814208D0A0792221484347498A +:10A7D000223140182860012070BD002070BD10B5E6 +:10A7E0003C4C0721A079401C0AF085FAE0798142AF +:10A7F00007D0A0790721401C0AF07DFAA171012041 +:10A8000010BD002010BD33488179C079814201D14B +:10A8100001207047002070472E494A7A002A04D050 +:10A820004989814201D1012070470020704710B54D +:10A8300004462848083009F0B9F9002815D12549FF +:10A840008879CA7990420CD0C87922214843274997 +:10A850002231401820601F48083009F0BFF901205C +:10A8600010BD1C48083009F0B9F9002010BD10B522 +:10A8700004461848083009F099F9002815D11549FF +:10A880008879CA7990420CD0C87922214843174967 +:10A890002231401820600F48083009F09FF901204C +:10A8A00010BD0C48083009F099F9002010BD094886 +:10A8B00010B5083009F07AF9002822D1054CA079AA +:10A8C000E17988421AD0E0790721401C0AF013FA96 +:10A8D000E1710DE0660000207372635C646D5F716E +:10A8E0002E630000AC1700207C1400209C16002072 +:10A8F0002046083009F072F9012010BD0C4809F01B +:10A900006DF9002010BD0A4808388179C07981426C +:10A9100001D101207047002070470548083881792F +:10A92000C079814201D101207047002070470000AA +:10A930006E00002070477047FF20704770477047D7 +:10A9400000207047002070470020704700207047AB +:10A95000002070470020704700207047002070479B +:10A96000002070470120704700207047002070478A +:10A970000020704700207047F8B5FE4D0446287F40 +:10A98000002600280AD0002921D1667010202070EE +:10A99000687FA070A87FE0702E7718E0A879012862 +:10A9A00001D00020F8BD002911D16670F149E87985 +:10A9B00001270831002801D0132000E00520207075 +:10A9C0001422A01C0AF01DF9A771EE71AE710120CE +:10A9D000F8BD70B5E8480078002802D00C26304653 +:10A9E00070BD0026E34D3446203DAE74EE746E75A6 +:10A9F000AE752E7528466E7320384673E87D0028A4 +:10AA000004D0FEF78BFDFFF748F8EC75D948847148 +:10AA1000C47104772030FFF791F8D6484830FFF72B +:10AA20008DF8DCE710B5D44C00232370D14C203CCA +:10AA3000E375D04B01241C71603B583307C3FFF70B +:10AA4000C8FF002803D0CDA1FF200AF076FA10BD80 +:10AA5000C8482038807C7047F8B5C64D0646407B14 +:10AA6000203DE873C34837791346AF73B27B427118 +:10AA70000446603C217006221946601C0AF0C1F8A9 +:10AA8000B07960730622F11DE01D0AF0BAF8687B08 +:10AA90000126002800D0EE74B6484038407B0028DC +:10AAA00000D02E753B000AF039FB0504062347064B +:10AAB000490000211DE0AF4801212030FFF74EF88A +:10AAC000AC48E11D2030FFF77DF8607B002807D0FF +:10AAD000012807D0FF20A9A142300AF02EFA0CE08D +:10AAE000002100E00121A3482030FFF786F804E0B0 +:10AAF0000621A0482030FFF731F800206875A875BE +:10AB00009C48611C2030FFF74FF89A48217820308C +:10AB1000FFF767F8974804214830FFF71FF895487A +:10AB2000611C4830FFF740F8924821784830FFF721 +:10AB300058F8AE740020F8BD0221DAE7FF208FA19B +:10AB40004C30CAE770B58B4C0125203C0246A575F8 +:10AB500088488079002801D03A2070BD8548603847 +:10AB60000378934206D1002262750622401C0AF047 +:10AB700048F86575002070BD70B504467D4D002015 +:10AB8000203D28752846224632380AF03AF82846F1 +:10AB9000203844730120287570BD764908717047CC +:10ABA00010B5744C0022203CE274607302462046CB +:10ABB00012380AF026F80120E07410BDF8B500F054 +:10ABC00044FB6C4C0025203CE07D002804D0FEF7BF +:10ABD000A5FCFEF762FFE575674E3570FEF762FC77 +:10ABE000A07B012804D00021084601F077FAF8BDC7 +:10ABF0000021022001F072FA5E4CA07901270028A2 +:10AC000007D0207F0028F2D105206077A57727772D +:10AC1000F8BD70780028FBD0564906226039487B81 +:10AC20006073C91D0846673009F0EBFF3C202072B5 +:10AC3000A7717570F8BD10B54E4C203CE17B207CAF +:10AC4000CA0701D0C2070BD08A070FD582070DD4DF +:10AC50002620FEF7F2FA207C02210843207410BD62 +:10AC60002520FEF7EAFA207C0121F6E74907F6D510 +:10AC70004007F4D42720FEF7E0FA207C0421ECE71B +:10AC800070B53D4D2878002873D13A4C203CA07C0B +:10AC900000287DD0FEF7FBFB0026267466746E70DC +:10ACA0003046FEF7F1FB0020FEF7EDF93748FEF7DE +:10ACB000BBFA2546403D296E8857FEF781FA334896 +:10ACC000C01EFEF79CFBFEF712FCFFF7B4FFFEF779 +:10ACD00031FAFEF7D5FB0120FEF715FB0F21052009 +:10ACE000FEF74CFA2978681CFEF73AFAA07B012897 +:10ACF0000CD004280AD0E07C002807D02146123965 +:10AD00000846627B5230FEF796FFE674207D0028ED +:10AD100008D0184840380146427B12398830FEF787 +:10AD2000BCFF2675607D00280BD01248691C2030BE +:10AD3000FEF73AFF0F48691C4830FEF735FF66758D +:10AD4000A675E86D0178002903D00178001DFEF793 +:10AD500019FAA86D0178002907D00178054A401C2E +:10AD60007332FEF77AFE0120E075FEF79BFB0020B0 +:10AD700070BD0DE030180020740000207372635C19 +:10AD80006C6C5F6164762E63000000005F5101000F +:10AD90000C20EDE7FE494860704770B50546FEF7A8 +:10ADA000A6FB002D06D00020FEF763FAFEF7C2F9DD +:10ADB000FFF741FFF74C607C002809D0A07B0128F9 +:10ADC00003D1F549F5480AF0B8F8FFF7F7FECFE7E9 +:10ADD000002D15D0A07B01280CD0FF202D30FEF7D0 +:10ADE00045FA0220FEF78FFAEA4820300079012860 +:10ADF00003D005E099208000F1E70220FEF73CFC3B +:10AE0000E4484030FEF753FB012008F084FDFEF7D4 +:10AE100099F9A07B03000AF081F9050404040604F3 +:10AE20000A00032000E00120FEF723FA04E0DB48DB +:10AE3000D9492A300AF081F8E17B207C8143012046 +:10AE4000002903D1A17B012903D06074D049087087 +:10AE50008EE700212174F9E710B5FEF718FBCC4806 +:10AE6000007800280ED1CB48807C00280AD0002032 +:10AE7000FFF793FFF6F7A5FAC648203000790128BE +:10AE800006D007E000F0E1F9FEF70CFB0C2010BD46 +:10AE9000F8F7BEF8002010BDBD490120487070478A +:10AEA00070B500F0BEFF00281BD0B94E3078B94C09 +:10AEB0002034012818D0022801D0032834D0B64904 +:10AEC000B7480AF03AF83078002809D0F6F779FA4E +:10AED0003078022804D12079012801D1FEF7CCFB7B +:10AEE00046E7FFF76BFE43E7AA4DA87B03281BD07C +:10AEF000FEF7EEFAE87D002803D0FEF7BEFDFEF770 +:10AF000006FBA4489030FEF7D2FA012008F004FDB9 +:10AF1000A87B01280CD004280AD061796F20012970 +:10AF200008D0032906D006E00120FFF736FFCAE764 +:10AF3000012000E07F20FEF79CF902203070C2E77C +:10AF400010B59448C07D002803D0FEF7E7FAFEF75D +:10AF5000A4FD00F066FF002817D08D4C2078022851 +:10AF600004D08F488C492B3009F0E7FF0120FFF710 +:10AF700014FF2078002807D02078012804D08848C2 +:10AF80008549333009F0D9FF10BDFFF717FE10BD1A +:10AF9000F1B582B0FEF744F90746FEF799FD0128A6 +:10AFA00029D000267A480078022804D07C487A49C3 +:10AFB000563009F0C2FF774DE87D002803D0FEF738 +:10AFC000ADFAFEF76AFDFEF792FA72489030FEF78E +:10AFD000E7FD0446029800286DD0FEF7CBF8002864 +:10AFE00069D020466B4C030020340AF097F80664C1 +:10AFF0006464066425640126D4E7A87B01285AD03E +:10B00000042858D0374304D16079002801D00228A1 +:10B0100051D160486830FEF74AFA012008F07BFC05 +:10B020000120FEF726F95A480321017020790128F2 +:10B0300044D1FEF721FB41E056489030C178D0382A +:10B04000C27991421DD10146D0310A79037A9A42E0 +:10B0500017D14A79437A9A4213D18A79837A9A42EC +:10B060000FD1CA79C37A9A420BD10A7A037B9A42EA +:10B0700007D10978407B4906C90F814201D10121DE +:10B0800000E00021A87B012801D0042801D100297B +:10B0900008D100280FD1374304D16079002801D0AE +:10B0A000012808D13B489030FEF79BFE002802D0D3 +:10B0B000A87D002812D00120FFF76FFE34480178E8 +:10B0C00000290AD00178012907D00078032804D08C +:10B0D000324831492A3809F030FFFEBD2C4F2D4946 +:10B0E000786804229F31343009F08BFD29484021D3 +:10B0F000903000784006C20F78680A54254906222D +:10B100009331413009F07DFD224978680322A33153 +:10B11000383009F076FD1F483B219030827D7868F9 +:10B120000A541C4990310A7ECB7D12021A43828751 +:10B130008A7E4B7E12021A43C2830A7FCB7E1102A3 +:10B1400019430184134990318A7F4B7F11021943BF +:10B15000418410490522AF31243009F052FD0D49D8 +:10B160007F68B0310879C20638462030D20E009090 +:10B17000827709794909C177A079002819D0207F01 +:10B18000002856D1E07900280CD013200BE00000F5 +:10B1900074000020101800207CAD0000E7030000C0 +:10B1A00093020000052060770020A077012020771F +:10B1B0003FE0E97D2B48002924D000212172B98984 +:10B1C00061814021C95D617339460622413109F030 +:10B1D00018FDF88BA082388CE082788C2083009850 +:10B1E000C07FA076E07E400840003043E076FEF766 +:10B1F0007CFCE17E4000C907C90F0143E1760120D4 +:10B20000E07115E000212172B98961814021C95D99 +:10B21000617339460622413109F0F3FCF88BA082B4 +:10B22000388CE082788C20830098C07FA076012043 +:10B23000A0710D4C0020207000F007F8FEF732F9E5 +:10B240000120616800F04AFF38E710B5FEF75AF9AF +:10B25000FEF74DF9FEF79BF80020FEF70AF8FEF71F +:10B26000DAF810BD3E180020740000208107C90ED6 +:10B27000002808DA0007000F08388008FA4A800022 +:10B280008018C06904E08008F84A800080180068CF +:10B29000C8400006800F704710B500F079FF10BD60 +:10B2A00070B5F34C0546A26800290DD0002A04D0E1 +:10B2B000FF20F0A1363009F040FEA560F6F782F8D5 +:10B2C0000220F6F779F870BD002A04D1FF20E9A129 +:10B2D0003E3009F032FE0020A060F6F774F801203D +:10B2E000F6F772F870BDE2480C30C07E002801D03D +:10B2F0000020704701207047DD480C30C07E704749 +:10B30000DB483430C07E70470021C1768176016011 +:10B310004162D7480C30C07E002807D1D448343071 +:10B32000C07E002802D1D24901200870704710B5B4 +:10B330000B46C17E847EA14204D01146184607F018 +:10B34000A6FB10BDFFF7E0FF10BD38B5C84C606824 +:10B3500001684978012924D00121684606F050F996 +:10B3600068460078C749000209F0C5FC60680268B9 +:10B37000C0685268511807F0A7F96168C860BC49F5 +:10B38000606834310022884215D0018B002912D028 +:10B390004272032101720271021D017FFFF7C7FF94 +:10B3A00038BD7D21C068C90007F08EF96168C860AA +:10B3B000B5480861E3E7018B491C01830221417212 +:10B3C000E7E7FFB5AA4E01460C36706A3468056897 +:10B3D00085B060680190306A03906A880798801A87 +:10B3E00080B202900898002804D0274638372046BB +:10B3F000483002E0371D2846643000900320387141 +:10B40000002915D001297DD0022951D003297AD0F5 +:10B41000AF2098A1C00009F090FD08980028387965 +:10B4200072D0032803D093A1984809F086FD3BE130 +:10B43000306A002804D195488EA1723809F07DFD4C +:10B440009249A88F9F3948434018069900F0A6FEFC +:10B45000A0618E49E88B9F394843069900F09EFE13 +:10B46000E0618A4AA88F9F3A316A50430918A0695F +:10B47000874A091A89183B22A162844B525D9F3B7F +:10B480005A4382181018FF30163020626062306A0A +:10B49000081AFF38ED213538C9008842BDD27D49F0 +:10B4A000884204D2794873A1653809F046FDB7E0B7 +:10B4B000764AA88F9F3AE16850430818069900F031 +:10B4C0006DFEA0617149E88B9F394843069900F0F1 +:10B4D00065FEE061306A002804D16C4865A15D38E2 +:10B4E00009F02BFD5820405B6B4A0028A88FE168CB +:10B4F00020D050430818A169401AA0622169A068B1 +:10B50000484302E01FE04EE0C9E0A169624A4018EA +:10B510003B21495D514341180818FF301430206227 +:10B52000E88BE1695043411A0F208001081A6062DC +:10B53000A06A35E050430818A169401A3168D33831 +:10B5400049684018D9E7284640300190008B002810 +:10B5500002D0306A002804D14C4846A1453809F091 +:10B56000ECFCE88B4C49E3694843C01AA06201999E +:10B570009C460A8B2169A368521A4B43A16959184A +:10B5800063465343C9183B22525D434B5A438A18C2 +:10B590005118FF31143121620F218901411A616272 +:10B5A000316A401A35E00898002803D03420005D45 +:10B5B000002873D1E88B38494843E169401A029961 +:10B5C0004843A062284640300490008B0028019830 +:10B5D00029D0002804D02D4826A11F3809F0ADFC41 +:10B5E00004982D4A018B02980818E16948434000ED +:10B5F000FF3014302062E88B5043411A0F20800145 +:10B60000081A606200F0C4FD00281CD0A16A0398EB +:10B61000081AFF38ED212338C900884200D3FCE620 +:10B6200002203871F9E6002802D00398002804D1DE +:10B63000164810A1263809F080FC0198A16AD33879 +:10B640000818A062CCE706F0A8FD0146706907F073 +:10B65000CDFFA16A081AFF38ED211E38C9008842C3 +:10B66000DDD2012009B0F0BD00ED00E000E400E013 +:10B67000C81800207372635C6C6C5F6C6D2E733045 +:10B680002E63000010270000B78913008105000019 +:10B6900036040000A3020000E20400002AE00328B0 +:10B6A00002D1FD4907200870A16A706907F00CF803 +:10B6B000B860616A206A884202D90098016001E09E +:10B6C000009908600098F54900680818F860A98892 +:10B6D0000798081A00B2002801DD022000E00020CF +:10B6E0007871089838700898002805D03420005DDB +:10B6F000002801D00220B5E70898012148402034F5 +:10B700006075317F3A463046FFF711FE0020A9E709 +:10B7100010B5E14900284A68516A096807D01268E3 +:10B72000C98BDF4BD2695943891A09F0E4FA10BD7D +:10B73000F8B5D94F35227868416A0C680168525CC7 +:10B74000002A0AD0498E6288914206D1407A0028A8 +:10B7500003D1D449D44809F0F0FB06F01EFD0146A0 +:10B760007868406907F042FFFFF7D2FF7968658883 +:10B770000B682E185A8EB24202DB521C5A8602E027 +:10B78000401C2818588608683622125C002A05D109 +:10B79000428E23899A4201D1521C4286088B03288B +:10B7A00002D2401C088302E00868408EA080204638 +:10B7B0004030C18A808A081A6188401E401885B2CC +:10B7C000203416E0496AE67F097976004B00B749D4 +:10B7D000007DCB5A895BC91889B20023FFF7F1FDC0 +:10B7E000002811D0012810D0AF48AE493A3009F0F6 +:10B7F000A4FB79680868428EAB1A1BB2002BE1DA11 +:10B800000820E07400F00DFEF8BD78680068418EF5 +:10B81000491C4186EDE770B59F4D1F202870A86830 +:10B8200000210162C27E130009F078FC0454540325 +:10B830004654426A146802681170026851600068D8 +:10B840002030407D002808D106F0A7FCA9680968CF +:10B85000096C07F0CBFE002815DCA86801684A8E49 +:10B8600061888A4204D12289511A6181628004E090 +:10B87000511A61810168498E61800268C168116452 +:10B88000C16841610FE0A8680168098E6288891A61 +:10B8900061810168098E618001680A6CC2600A6C6E +:10B8A0004261886C6066204601F06FFC00280ED073 +:10B8B0007B487C49D33808E0C1684161FFF7E0F973 +:10B8C000002804D076487749CD3809F036FBF5F7E3 +:10B8D00078FD70BD72487349C638F6E710B56E4AF8 +:10B8E0000B00526809F01AFC0906090F1F0C2D2DD8 +:10B8F000082A2D00FFF78FFF10BD00F05DFC10BD82 +:10B90000FDF7BEFE10BDD07E022806D0D07E0328F3 +:10B9100006D00120634940020DE0FFF709FF10BD8A +:10B92000FFF713FD10BDD07E0228F6D0D07E03288D +:10B93000F6D05C495E4809F000FBF1E706F013FC25 +:10B9400010BD5B4857490F3009F0F7FA10BDF3B549 +:10B9500081B0514C02982546002601270C35030082 +:10B9600009F0DCFB0906313C3C3143433C3C4300DD +:10B97000494801210C30FFF793FC02990198FFF729 +:10B98000ADFFE87E022828D1A0680468406A0668F6 +:10B9900006F0E2FBF18B424A5143E269891AD3393E +:10B9A000FF223232E162904202D24248081802E09D +:10B9B000081A41494018E0624048E16A814200D8D3 +:10B9C0000846E06206E001460198FFF787FFE87E3F +:10B9D000022802D1286820300775FEBD0146656047 +:10B9E0000198FFF77BFF6660FEBDFF202D49AB305D +:10B9F00009F0A3FAFEBDF8B5064627480D46002417 +:10BA00003430254F0B0009F089FB09060C10100C8F +:10BA1000161610101600204801213430FFF740FCA4 +:10BA200029463046FFF75AFFF8BD78603046FFF7E9 +:10BA300055FF7C60F8BDFF201A49DF3009F07DFA20 +:10BA4000F8BDF0B5144C0020616885B003268E76F1 +:10BA5000CA7E0746032A03D0C97E00293FD03FE0B3 +:10BA6000087F002804D112480E49CE3009F065FA4B +:10BA70006068057F684606710221417106F08DFB02 +:10BA80000290FF20F530039001216846017069465D +:10BA9000284606F0FCFF14E0C81800201917000023 +:10BAA000E204000074B60000620600006451010068 +:10BAB0000B0200007CF8FFFFADF9FFFF3812000019 +:10BAC00020BF6068007F07F01DFE0028F8D0606886 +:10BAD000007F06F048FB60680777FFF715FC012040 +:10BAE00061688F7605B0BEE5FE494A68907600E051 +:10BAF00020BF4A68D07E002803D0D07E937E984233 +:10BB0000F6D0D07E002803D0002000219176704727 +:10BB10000120FAE770B5F34900240C31CA7EF14DDB +:10BB2000032A03D02831CA7E032A17D1696000286E +:10BB300010D001280AD0EC49EC4809F0FEF90020A9 +:10BB40006968002C0860686008D070BD0320FFF7AA +:10BB5000CBFF01E0FFF775FF0446F0E70C2070BD56 +:10BB6000F8B5E04F04461F25E67E330009F0D6FA0B +:10BB7000042A20031B20DB480C30844203D0DA491E +:10BB8000DB4809F0DAF902207C60FFF7ADFF0028FE +:10BB900005D07968002008604862786012E00C25C2 +:10BBA000002078600BE00120FFF7B4FF054604E0B9 +:10BBB000CF48CD490C3009F0C0F9002D02D0E07E0D +:10BBC000B042D1D1E07E002804D0C948C649123025 +:10BBD00009F0B3F9F8BDC34810B50C30FFF7C0FF4A +:10BBE000C0483430FFF7BCFFBE4900205C31087507 +:10BBF000C0494870BB490C3148610A46283250613F +:10BC00008876907601220C390A708860486010BDF1 +:10BC100070B504460120FFF729FBC5B20B20FFF7E2 +:10BC200025FBC0B2854204D0B148AF49343809F091 +:10BC300084F90120FFF71AFBC5B21820FFF716FBA5 +:10BC4000C0B2854204D08920A749800009F075F967 +:10BC50000420C043FFF70AFBC5B21920FFF706FB1B +:10BC6000C0B2854204D0A2489F49323809F065F934 +:10BC7000A0489C490C38047000200C31C8768876A6 +:10BC80000A462832D07690769A4B0124083B1C71E4 +:10BC900018604862506208601060FFF79CFF70BD3A +:10BCA0009048007870479349083908717047F3B598 +:10BCB0000D468C4983B00C31CA7E08462830894C29 +:10BCC000002A02D1C27E002A03D0C97E022903D0F5 +:10BCD00005E08948616006E0C17E002901D00C20A2 +:10BCE00000E76060854806F0EAF9616808776068F7 +:10BCF00080490160007F002804D17C487A4962387D +:10BD000009F01BF906F028FA7D49884200D208465E +:10BD1000FF30C83086B260680321C1760027012D4C +:10BD20002FD0734A03991A32514302685160006858 +:10BD300001210170684605F063FC6846007871498E +:10BD4000000208F0D8FF019106F027FA0199711856 +:10BD500006F0BAFC6168032DC86021D06A4808610A +:10BD6000606803210172022141720771021D017F87 +:10BD7000FFF7DDFA60680783072020700020676006 +:10BD8000B0E606F00AFA314606F09EFC6168C8602B +:10BD90005E48086108680770096801204870DFE79D +:10BDA0005B48DCE77047F8B54E4E0C36F17E002953 +:10BDB00004D131462831C97E002901D00C20F8BDBC +:10BDC0000221F176474C4B4F5C34083F7762346078 +:10BDD000002538602575397920304A004D49C07FEB +:10BDE0008A5A4000085A2B46101881B22A46284623 +:10BDF000FFF7E7FA002804D03C483B49323009F00D +:10BE00009CF825610120A56020756586258635484A +:10BE10007C30857539684888401E4880358300200D +:10BE2000F8BD10B52F4801248068817E03290CD00D +:10BE300001684978002906D0006A3749884202D94A +:10BE40000024FFF729F8204610BD0024FBE7254811 +:10BE5000806802681178491C1170016A0068C26A22 +:10BE6000914204D8007D012801D0012070470020B4 +:10BE7000704700207047F8B51A481A4C0C306060C3 +:10BE8000416A00260D68006834212F460E54403761 +:10BE9000B97C002966D1007D032863D106F07DF9C5 +:10BEA00001466068406907F0A1FB00285ADDFFF7F2 +:10BEB0002FFC6988401C4118606802681186006880 +:10BEC000018E2A89511A09B200294BDD0121203047 +:10BED0008175F88AB98A401A6988401E401887B26D +:10BEE00039E00000C818002074B600007703000095 +:10BEF00057020000880000204FB90000F7B9000089 +:10BF0000F605000010270000F7130000B7891300A2 +:10BF1000E2090000645101002C841300496A097988 +:10BF20004A00CE498B5A028E007D94463F22525DD4 +:10BF30005200895AC91889B201236246FFF741FAB3 +:10BF400000280FD001280FD002280BD0C920C449E7 +:10BF5000C00008F0F2FF61680868028EBA1A12B2D7 +:10BF6000002ADBDA6660F8BD60680068018E491C53 +:10BF70000186F0E7F8B5BB4D0026AA680128516A92 +:10BF80000C6810D00720287006F052F8B6480078E8 +:10BF9000F6F7E8FDA86806830268618851860068A4 +:10BFA00020308675F8BD087913684100AB481F7DC5 +:10BFB000415A032F17D01A7D022A21D01A7D012A57 +:10BFC000E2D13F231B5D22895B00C05A0023401849 +:10BFD00081B20120FFF7F5F90028D5D0A049A34888 +:10BFE00008F0ABFFD0E71E6112683F2396601B5D2F +:10BFF00022895B00C05A0023401881B20320E9E780 +:10C000005822125B1A613F231B5D22895B00C05AD4 +:10C010000023401881B20220FFF7D3F9AA6801215A +:10C0200012681175D8E738B58E4C0021A0680D460E +:10C0300000684278002A01D045701FE0007800288F +:10C0400009D00121684605F0DBFA68460078884986 +:10C05000000208F050FEA0680268C06852685118DB +:10C0600006F032FB0146A068C160057102214172F1 +:10C07000021D017FFFF75BF9A068058305F0D8FF7B +:10C0800079480078F6F76EFD38BD10B50146754A5F +:10C090000B00906809F042F8060D150408190C1CF5 +:10C0A000012100F0A8F807E00021506800F0A3F893 +:10C0B00010BD0120FFF75EFF00210846FFF7F0F8F2 +:10C0C00010BD00680321017510BD00F0A7F810BD78 +:10C0D0003D206349400108F030FF10BD70B5614C50 +:10C0E000002809D0012816D0022821D05F485C49D9 +:10C0F000C73008F022FF70BDFFF795FF002108460A +:10C10000FFF7CEF8A068807E002801D01F2000E055 +:10C110000720207070BDA068002501684D70FFF7F2 +:10C12000F3F80320F6F763FC05F082FFA56070BD0D +:10C13000FFF779FFA068FFF7E7F800210846FFF74F +:10C14000AFF80420F6F753FC70BD46498968CA7EF3 +:10C15000022A08D10A681378002B04D150600968BC +:10C16000CA6A1018C862704710B53E4A0029926822 +:10C170000CD0012907D0022907D03C483849E730C4 +:10C1800008F0DBFE10BD401E00E0401F106210BD35 +:10C1900034488068002800D00120704710B504465C +:10C1A0000020002907D0334808F0A5FD01462046AD +:10C1B00008F0A1FD401C10BD10B52A488068C07E63 +:10C1C000030008F0ABFF041414030A1401F0E5F8AF +:10C1D00000280BD02249284806E0FEF73DFE002843 +:10C1E00004D025481E49001D08F0A7FE10BD2248B6 +:10C1F0001B490B30F8E710B50446002903D0002096 +:10C20000FFF7B8FE03E018480078F6F7ABFC2046CD +:10C21000FFF77AF80020F6F7EAFB10BD10B51148D9 +:10C220008268506A11680068CB698B60124BC18BC1 +:10C23000B13359431368D9600146E0314B88838795 +:10C240000C783B231C548B88C383CB8803840989D7 +:10C25000418411680220087510BD0000645101007E +:10C2600074B60000C81800207C000020FD06000005 +:10C270001027000040420F0031040000F8B5FEF71F +:10C2800014FA0646FEF782FAF94D07466879F94C2A +:10C29000002809D0012823D0022826D003282ED038 +:10C2A000FF20F5A1C63033E0F2481830FEF75AFA05 +:10C2B000002801D003200FE0EE481830FEF7BEF949 +:10C2C000002804D060696030007A002806D0E94870 +:10C2D0001830FEF71AFA012068711BE00220FBE714 +:10C2E000E4481830FEF711FA14E0E2481830FEF77F +:10C2F000A5F900280ED1FF20DFA1B83008E0DD4805 +:10C300001830FEF72FFA002804D1FF20DAA1C03040 +:10C3100008F013FEA169F722087810400870AA7986 +:10C32000D207120F1043FB2210400870EA79D2079F +:10C33000520F104308706B79EF22022B04D0012BAF +:10C3400007D0032B07D00CE0012E06D8002F04D015 +:10C3500007E07F1E3E43002E03D010401022104302 +:10C3600000E010400870287C002811D0687901286E +:10C370000ED0BF485438FDF79AF8BD49606954396A +:10C380007830A269FDF7F5FA0020FDF701FB04E023 +:10C390000846FDF78CF8FDF71EFBA0690078C00683 +:10C3A00006D4E0690078C00602D4E079002802D003 +:10C3B000A079002801D0012000E00320FCF759FFFC +:10C3C0000320207001202071F8BDAA4810B51C3050 +:10C3D000FEF7EFF9A74C002802D00020607004E0BF +:10C3E00001206070A2485438E061A148407C0028D8 +:10C3F00002D06078002805D0E069FDF758F8FDF715 +:10C40000EAFA10BD9A485438FDF751F8984A606925 +:10C41000543AA030E169FDF7ACFA0120FDF7B8FA13 +:10C4200010BD10B593490022486932238276C27646 +:10C4300001221A544030807C002803D00A70002169 +:10C44000022001E000210320FFF71FFE10BD70B5A0 +:10C45000884C6079C2062046416908464030002A6F +:10C4600001DA002202E0028B4B89D2180B460283CC +:10C47000C0331A7E002A03D0828B4D8952198283E1 +:10C48000627A002A03D03D2001F0BEF852E08A7E95 +:10C49000032A4FD0227A002A13D0500701D4D006A5 +:10C4A00001D51E2036E0100701D53D2032E0D0072F +:10C4B00005D1900703D470A1734808F03EFD2A20EF +:10C4C00028E060318A78002A05D0C28B551CC583CC +:10C4D0000D88AA420FD25A7F062A02D01A7F062A56 +:10C4E00005D1428B531C438309888A4203D2828B35 +:10C4F000C18A8A4201D322200CE0027C808A002A71 +:10C500000FD006280FD35A48C07B012801D03E2007 +:10C5100000E0082001F078F86069807E032809D0E7 +:10C5200001E08842F5D20120207000210846FFF783 +:10C53000ACFD70BDFFF775FF70BD10B54C494D489F +:10C54000CA7B002A2BD0012A29D0022A27D0032A0D +:10C5500004D049A14D4808F0F0FC10BD897B0229A8 +:10C560000FD007291BD0406901464031CA8A898A09 +:10C57000511A891E89B2032900D303210289511857 +:10C580000BE04069014640318A8A032A01D20189C1 +:10C5900003E04288C98A5118491C818010BD406956 +:10C5A000F5E700B5030008F0B9FD0604070B0F120C +:10C5B000121700290ED00FE0491E02290AD90BE0FC +:10C5C000491F012906D907E0072903D004E00A39E9 +:10C5D0000C2901D8012000BD002000BDFEB5054694 +:10C5E00024481830FEF79FF8002804D1274822A1DC +:10C5F000CF3808F0A2FC1F4CA069FDF715FC032101 +:10C60000A069FDF73FFCA069EF220178114001709D +:10C610002946FDF77BFC002601272B0008F07EFD54 +:10C620000E5D5D085D1D6161155D4D5D613D385DAF +:10C6300060697121095C002901D0062101E0C03048 +:10C64000417EA069FDF72DFD4BE0E069FDF788FC18 +:10C650000146A069FDF796FD43E06169A069D0310C +:10C66000FDF759FD6169A0699531FDF762FD38E07C +:10C67000C4190020900000207372635C6C6C5F73BF +:10C680006C6176652E6300006B0200007808000084 +:10C690000621A069FDF772FD23E020690178A069F9 +:10C6A000FDF756FD20698188A069FDF753FD2069DB +:10C6B0004188A069FDF752FD13E00096019660697C +:10C6C0006030007C002803D0694608783843087041 +:10C6D0006946A069FDF768FD03E0FE49FE4808F0E1 +:10C6E0002CFCFEF72AF8002804D1FB48F949801DEC +:10C6F00008F023FC0C2D07D0072D04D060695E21C3 +:10C700000E5260308770FEBD606940304683FEBDCA +:10C71000F0B5F24CDC2061698DB0405C042809D092 +:10C72000052834D16031487A002829D00120487486 +:10C73000022026E01022EA31684600F09DFF616980 +:10C740001022C83104A800F097FF684605F0B1F840 +:10C75000616908AA6CCA0F46CB6778378A670846B2 +:10C76000FE608030BD60074620376CC7002303633E +:10C7700043630120A0310876D9494874052000E0C0 +:10C780000D20FFF72BFF61690020C03108770DB045 +:10C79000F0BDF8B5D1481830FDF7C5FF002842D0EC +:10C7A000CE4C207A00283ED160690025C030007E42 +:10C7B000CB4E00280BD0B17B0120FFF7F2FE002802 +:10C7C00005D1B17B0420FFF7ECFE002806D060699C +:10C7D0000127C030407F062807D00CE060695C214B +:10C7E0000D526030457402202FE0B17B0420FFF72A +:10C7F000D8FE002810D0B07B030008F08FFC173F54 +:10C800003F3F3F1E3F3F3F3D3F203F3F3F292C3FA3 +:10C810003F3F3F3F3F2F3F0060696A21095CC907E6 +:10C8200002D0C0304577F8BD0C20FFF7D7FE606915 +:10C830006030817A39438172F8BD072005E0FDF749 +:10C84000E2FF0028F8D075740B20FFF7C7FEF8BD93 +:10C8500000F021FFF8BDFFF75BFFF8BD6069002124 +:10C8600080308160C160057437740620FFF7B6FE22 +:10C87000606960308570F8BD0920E6E700F0CDFE04 +:10C88000F8BD70B5964DA87B072834D1934CDE22B5 +:10C8900060694188125A491C91422CD1217A0029A1 +:10C8A00029D10146E0318B88C28B934207D1CA88D7 +:10C8B000068CB24203D10A89468CB2420DD0884A16 +:10C8C0008689303A56819381CB88D3810989118238 +:10C8D00001462E3151600121117001221146FDF7F0 +:10C8E000B1FC00210420FFF7D0FB61690020C031BA +:10C8F0004877A873E87370BD70B5794CA07B162893 +:10C9000003D07449774808F018FB74480021426945 +:10C9100073486032117291703038067E0B25012306 +:10C92000002E06D0027D002A12D14575817503754F +:10C930000EE0567A002E06D05172228882838176CC +:10C940000C22027604E02288828381768377057642 +:10C95000A17370BDF8B5614DA879800723D5287AF9 +:10C96000002820D15E4C0120A17BFFF71AFE002891 +:10C9700019D1A8690127C0780026030008F0CEFB72 +:10C980000E626208622E3B4F0A62146220524562B8 +:10C99000022021E0A07B042804D052484D493338BE +:10C9A00008F0CBFAA673F8BDA07B082804D04D4848 +:10C9B00048492D3808F0C1FA686960308670F1E79F +:10C9C000A07B0A2804D047484249263808F0B5FA27 +:10C9D0006869603007720B20A073F8BDA07B0E2839 +:10C9E00004D0AB203B49C00008F0A7FA686960306A +:10C9F00007720F20F0E7A07B0F2804D03948354993 +:10CA0000183808F09AFA1120E6E7A07B0F2804D026 +:10CA100034483049123808F090FA1320DCE7FFF769 +:10CA20006BFFF8BD69690846C0310A7F062A04D148 +:10CA30006030807A800700D50E77487F0628F0D1D5 +:10CA40004E77F8BD274823496E3008F076FAF8BDD6 +:10CA500010B5234C0020A17BFFF7A3FD002804D1D3 +:10CA60001E480122017A114301720420A07310BDF7 +:10CA700010B51A4C60690146C0314A7F002A06D0C1 +:10CA8000097F062903D0217A0122114321726030E7 +:10CA9000807A800715D4E069FDF764FB6169603135 +:10CAA000C872E069FDF760FB616960318881E06907 +:10CAB000FDF75FFB616902226031C881887A10430B +:10CAC0008872606900220146C0310B7F062B00D1BD +:10CAD0000A7709E078C60000ED070000900000200A +:10CAE000C4190020770500006A231B5CDB0703D113 +:10CAF00006234B774030428310BDF8B5FE48817B5A +:10CB00000020FFF74EFDFD4C0126002807D160698B +:10CB10006030407A002802D1207A30432072616967 +:10CB200000255E20455262204654C831E069FDF779 +:10CB3000DAFA6169E0699131FDF7E4FA616904228A +:10CB400008469131B93008F05CF8EB483038017E86 +:10CB50000827002906D0017D002912D14775857567 +:10CB600006750EE06169054689894183E249E069FD +:10CB70001439FDF7A0FAE049E0690C39FDF7A8FA8D +:10CB80002F76DD480E218173F8BD70B5DA4D002097 +:10CB9000A97BFFF706FDD94C002803D1207A01219B +:10CBA00008432072E069FDF742FA00280ED0E069E0 +:10CBB000FDF738FA6169DE225052498800F0B6FD6F +:10CBC000002806D0282000F01FFD70BDFFF740FFB1 +:10CBD00070BDE069FDF720FA6169E0310870E06935 +:10CBE000FDF713FA6169E0314880E069FDF7F2F979 +:10CBF0006169E0318880E069FDF7F5F96169E0314C +:10CC0000C880E069FDF7F8F96169E0310881072023 +:10CC1000A87370BDF8B5B94CA079C0076FD0207A61 +:10CC200000286CD1B44D0120A97BFFF7BAFC002885 +:10CC300053D1E0690027C178022201260B0008F0D9 +:10CC40006DFA0D161308354A4A384C474A192944DB +:10CC50004A00FDF728FA6169DA225054AE735E206B +:10CC6000475260318E7038E000F06BFD35E0FFF721 +:10CC70008CFF32E0A97B0020FFF793FC002802D153 +:10CC8000207A3043207260695E210F5260308670D6 +:10CC90000A2018E0A87B0B2802D0207A10432072CB +:10CCA0002F746069603046720C200CE0FFF725FF9E +:10CCB00013E0A87B112802D0207A1043207260690B +:10CCC000603087701620A87307E0FFF7D1FE04E0FC +:10CCD00000F004FD01E0FFF7BBFEFDF780FD00283A +:10CCE00004D14F208649000108F027F9606900232C +:10CCF0008030016B426B491C5A4142630163F8BDAD +:10CD0000F8B57D4F012814D1787C002802D1387CF9 +:10CD1000002801D0FCF75FFEFCF7F4FBFCF7E7FB13 +:10CD20000020FCF7A6FAFCF732FBFCF774FBFCF7DB +:10CD3000B9FBF87B01260025704C00280FD16079E3 +:10CD4000C10705D00220F87360694030057402E025 +:10CD5000800717D5FE7300210120FFF796F9F87BB5 +:10CD6000012802D0022808D00CE06079C00709D061 +:10CD70000220F8736069403005746079000701D5BE +:10CD80000320F87300F00EFDFFF703FD2079002863 +:10CD900001D03D8102E03889401C38816079C007AC +:10CDA000606904D072210D544030858203E0403028 +:10CDB000818A491C8182E079002806D0616960314E +:10CDC000887C022806D8401C887460696030807CAA +:10CDD000022804D93D817D81606960308574B97B0A +:10CDE0000020FFF7DEFB002802D1B87B06284BD1DC +:10CDF00060690146C0310A7F062A45D0497F06296D +:10CE000042D03D49C97B03293ED16030807C002857 +:10CE10003AD1FDF741FC002836D0FDF7B7FC0028D9 +:10CE200032D06169C88801282ED90A46403256742A +:10CE3000D08A978A831E9F4201DB012002E0C01B3B +:10CE4000401E80B22C4B1F89A3899F4201D301232E +:10CE500002E0DB1B5B1C9BB2984200D918460128FC +:10CE600000D155742A22525C002A11D0224A898DA1 +:10CE700052898A4201D3012102E0891A491C89B2F0 +:10CE8000884205D9084603E06169012040314D74AC +:10CE900061694A8810180881FFF74FFB6069122208 +:10CEA00015490C3007F0ADFEFFF7D1FAFEF7E1FFB0 +:10CEB00000280AD0104810388179002905D161690D +:10CEC00002468989203A118586710C481C30FDF78D +:10CED000CEFC00280FD0E06900788007800F012881 +:10CEE00009D0022807D0FDF7E2FC002803D104494D +:10CEF000044808F022F807E0C41900209000002040 +:10CF000078C600007F030000606940308574F8BD7A +:10CF100070B5FE4C607900283CD0FD4D022810D140 +:10CF2000FDF79BFB002803D1FA49FB4808F005F800 +:10CF30006A69002380329068D168401C5941D160F1 +:10CF40009060002666712079012804D12671A879A5 +:10CF500010210843A871E078012816D1E670A8795D +:10CF600008210843A871FDF707FC002804D1EA480E +:10CF7000E849183007F0E1FF6969002380318A68C9 +:10CF8000C868521C58418A60C860A079012802D044 +:10CF90000120A07170BDA67170BDF8B5DC4CDB4DF1 +:10CFA000E26900271078042183079B0FE8790126A6 +:10CFB000012B11D0022B0FD0032B01D0207A30E0AF +:10CFC0006178002905D1AE70A1793143A17123E0C8 +:10CFD000EF71F8BDEE71F8BD5278D3061CD06078C1 +:10CFE0000028F8D1D006C00E1B2818D86079084355 +:10CFF0006071FDF7F4FB002804D1C748C5494B30E8 +:10D0000007F09BFF606900238030026B416B521C6C +:10D01000594102634163E8790128DBD1D8E7207ADE +:10D02000102108432072F8BDF8B5B84D0446303DD4 +:10D03000287D002700280AD0002978D167701020A9 +:10D040002070687DA070A87DE0702F756FE0287853 +:10D05000002814D000296AD1072067702E4620705E +:10D06000083607E0686807802F700A223146A01C46 +:10D0700007F0C7FD28780028F4D1A77057E0287E74 +:10D08000A24E143E002837D0002950D1297EA04856 +:10D090000B0008F043F80D2C2C2C2C2C2C2C2C11D4 +:10D0A0002C2C20082C0067700C212170A97EA17007 +:10D0B00040698089A08018E008216770217040696C +:10D0C0000A468089914960801439201D07F099FD36 +:10D0D0003089A08109E067700B212170A97EA170C1 +:10D0E00040698089A080A87FA0712F761FE08949C0 +:10D0F0008A4807F022FF1AE0844810388279002A13 +:10D1000008D0002913D1677011212170B189618085 +:10D1100087710CE0827A002A0BD0002907D1677052 +:10D1200012212170318A6180718AA1808772012069 +:10D13000F8BD0020F8BD76480078012801D00C2009 +:10D140007047724900203039087008750876203120 +:10D150008871704770B56E4C064620780D460028E1 +:10D1600004D093206B49000107F0E7FE01202661FF +:10D17000E07225622070FFF7DEFF002804D06748C8 +:10D180006449493007F0D9FE70BDF8B5604C21788C +:10D19000012902D12178012901D00C20F8BD0146D6 +:10D1A0000546606112220C31584807F02AFD01271C +:10D1B0004035AF74554D2888FDF735FA002827D043 +:10D1C0002888FDF7EBFA002822D02888FDF7A0FA7E +:10D1D00000281DD02888FDF7BAFA002818D0FCF7DF +:10D1E00056F960690026C088002825D048481830C4 +:10D1F000FDF799FA00281FD06069C030007E002832 +:10D200001AD0A97B0120FFF7CCF9002802D013E047 +:10D210001220F8BDA97B0420FFF7C3F900280BD129 +:10D22000606901464030868360314E740220FFF70A +:10D23000D5F96069403046743448303800780028A9 +:10D2400004D16169C88D098C884201D86069008C5D +:10D25000A08160694189491E8AB22989891829817A +:10D26000297B002902D06E812E7302E0698989181A +:10D270006981014640318B8A9B188B82C388012BC0 +:10D2800001D85B1CC380002A01D060308674A87B63 +:10D29000032816D0487C002815D02889A189884207 +:10D2A00011D2FDF7F9F900280DD060692A21095C37 +:10D2B000002908D06989808D814204D3A670E77067 +:10D2C00003E0A77001E0A670E670606951210E547A +:10D2D000A97B052901D0062915D1DE214288095AEA +:10D2E000511A09B200290EDB01460522E031243033 +:10D2F000F3F76AFF012202216069FCF7A3FF60696E +:10D30000C0304677AE736069418909E0C4190020D6 +:10D310009000002078C6000039070000F1080000E6 +:10D32000FDF745F8A07800282AD160692030807A7E +:10D33000002800D06E810120FBF7A5FE606938301F +:10D34000FCF75DF860693430FBF76EFF216A00205E +:10D350000856FBF735FF0120FCF796F8FBF7EEFEC9 +:10D36000FCF78EF80120FBF7CEFF6069406EFCF7FA +:10D37000A1F8FFF72AF860694030C07BFBF75DFF3A +:10D380006671E671A6712672A67266722671022017 +:10D390002070FCF787F80020F8BD10B5F74C207816 +:10D3A000022801D00C2010BDA078002803D0002056 +:10D3B000FFF7A6FC17E0FCF76AF800F01DF96069BA +:10D3C0002030007C012809D0FCF7BEF8FBF7BBFE3B +:10D3D000F3F7F7FFE07A012803D004E0FCF7BCF88C +:10D3E000F4E7F5F715FE002010BDE449C872704758 +:10D3F00010B5E24C2078032803D0E149E14807F05A +:10D400009CFDE14801218278002A06D0002282702A +:10D410000171A27904231A43A271A2691378DB4334 +:10D420009B0707D1C378002B04D1C170A0790221DA +:10D430000843A0711078C00606D4E0690078C006E1 +:10D4400002D4E07900280CD06078002809D1A079B6 +:10D45000002806D1FEF7FBFC002802D0207A002825 +:10D4600003D00120FFF74CFC03E0FEF7AEFF00F015 +:10D47000C3F82078012806D0F3F7A3FFE07A01284B +:10D4800001D1FCF7F9F810BD38B5BC4C606920300B +:10D49000007C012820D1A07A00281DD16846FCF725 +:10D4A00063F8002818D061693120405C012810D150 +:10D4B000B54A0D236D460020D3562856834208D026 +:10D4C00050738989303A9185114620318873012043 +:10D4D0008872A07A401CA07238BD70B5A74C064671 +:10D4E0002078042804D0A748A549553007F025FD29 +:10D4F000607910210843A44D6071002E47D0FCF7DD +:10D5000082FA61780126084300280ED1687C002841 +:10D510000BD0E0694178C90607D00078E9790007A7 +:10D52000C00F884201D1667247E0E078002809D038 +:10D53000E0694178C90605D10078C00602D4FFF73A +:10D54000A3FF3AE0FFF7A0FFE069A9790078400760 +:10D55000C00F884205D0FFF7DBFC60790821084343 +:10D560006071E069E97900780007C00F884201D155 +:10D57000FFF713FD6079304360710020E071A079FE +:10D58000000702D5A87B022817D0207A13E00221D9 +:10D5900008436071E079401CC0B2E07101280CD8EA +:10D5A000687C00280DD0784854384078C106C90EF0 +:10D5B000052906D2C006002803D00120FFF7A0FBF2 +:10D5C00001E0FEF75BFE2078012806D0F3F7F9FEB4 +:10D5D000E07A012801D1FCF74FF870BD10B567481B +:10D5E0000078042804D067486549B73007F0A5FCE7 +:10D5F0000120FFF785FB10BD10B50720FBF739FEB2 +:10D600005E490420087010BD5C49332249695054BA +:10D610005D4A032090738876704710B5574C606957 +:10D62000C030007F00281CD0062806D05648817BD9 +:10D630000020FEF7B6FF002813D060690146C03114 +:10D640000A7F130007F06AFD070D0D0D0D0D0D0586 +:10D650000D006030807AC20704D0C043800700D13B +:10D66000087710BD0C20FEF7B9FF60690122603019 +:10D67000817A1143817210BD10B5002A0AD00023AF +:10D6800006E0D41A6418203CE47FC4545B1CDBB26F +:10D690009342F6D310BD10B503F0B1FF0C281CD394 +:10D6A000364C08216069D03003F0AAFF002806D06C +:10D6B00060690421953003F0A3FF002803D13049AD +:10D6C000324807F03AFC6169042208469531BD30C2 +:10D6D00007F097FA0420FEF781FF10BD7CB52A4EB3 +:10D6E0000020B17BFEF75DFF0125244C002802D10C +:10D6F000207A284320726946E069FCF75BFD6846A2 +:10D7000000780021C207D20F684602706069002AC3 +:10D7100002D06030057401E06030017460695E22FF +:10D720001152603085700820B0737CBD401A1849D2 +:10D7300000B2884201DC002801DC01207047002093 +:10D74000704770B5104D0020A97BFEF72AFF0B4CE7 +:10D75000002803D1207A012108432072E069FCF7F8 +:10D760009BFC6169DE2250524988FFF7DFFF0028E9 +:10D7700010D02820FFF748FF70BD00009000002067 +:10D7800078C60000320A0000C419002062060000BA +:10D79000FE7F00006169E069E031FCF771FC052063 +:10D7A000A873E9E770B500F047F8384C384D607958 +:10D7B000400709D5A97B0520FEF7F3FE002803D01A +:10D7C000207A082108432072FFF724FA00F012F8AB +:10D7D000FFF7C0F8A079C00609D5A87B030007F0C1 +:10D7E0009DFC06060606060604060620A873FFF73B +:10D7F00048F8C1E710B525488179490714D5017A61 +:10D80000002911D12249897B0B0007F087FC080D04 +:10D81000050D0D0D0E0D100D4069002262210A54F8 +:10D82000C030807EFFF7F0FE10BD012100E0022134 +:10D830004069C030417710BD10B51448817909079F +:10D840001DD5017A00291AD1114A947B230007F0D3 +:10D8500065FC1416160B1616161616161616161640 +:10D860001616161616161716406960308170407C21 +:10D87000002801D0062000E01620FFF7C5FE10BDED +:10D880004069603001728170917310BD900000207A +:10D89000C419002010B5031D03600020521E04E0CF +:10D8A0005C181C60401C2346C0B29042F8DB00208C +:10D8B000186010BD01460A680020002A02D01046F8 +:10D8C00012680A60704702680A60016070470000D1 +:10D8D00000B51A2822D00ADC030007F01FFC0D1146 +:10D8E0001F131F1F191915171F1F1F1B1F002A2881 +:10D8F00014DD3A38030007F011FC030F1109110081 +:10D90000002000BD1E4800BD042000BD0D2000BD4C +:10D910000F2000BD082000BD112000BD032000BD68 +:10D9200010B50C46F4F7CFFF00281AD02046F4F7C4 +:10D93000CCF9002812D020780E280BD00F2809D05F +:10D94000022807D0032805D00EA1772007F0F5FAAA +:10D95000002010BDA078FFF7BBFF10BD09A17D20FE +:10D96000F4E708A18320F1E710B5F4F735F910BD0D +:10D9700010B5F4F7AAF910BD10B5F4F78CF910BD85 +:10D98000023000007372635C686F73745F68636970 +:10D990002E630000F0B597B00021032004F082F957 +:10D9A0000025FE4E022775807574347C12E0F06805 +:10D9B000E1004018818800290CD0858069460F70ED +:10D9C0004D70016802918088694688800021684610 +:10D9D000F8F734FD2046641EE4B20028E7D117B002 +:10D9E000F0BDEE4BD86019741A80D3E7EB49EC4BCD +:10D9F0004A8800201A4200D00120497C002901D029 +:10DA0000082108437047F7B504460E460078012107 +:10DA1000E34A8140521C114098B0E04A009151887D +:10DA2000E04B994205D0009B002B05D0DC4B1942FE +:10DA300002D001201BB0F0BD009BD84A1943518091 +:10DA40001A9D002D11D00020287022781A980027E6 +:10DA5000401C130007F062FB10EF0D152137555DD8 +:10DA60006A39AFAB85B3EEEDECEF0B28EDD00420B7 +:10DA7000E0E702212970A1880170090A41700320A2 +:10DA800093E004212970A1880170090A4170E1889E +:10DA90008170090AC170052087E006212970A188DC +:10DAA0000170090A4170E1888170090AC1702189F9 +:10DAB0000171090A4171A289E81D216907F0A1F8E5 +:10DAC000A089C01D71E0082129702178082901D1A1 +:10DAD00010212970A1880170090A4170E1888170C4 +:10DAE000090AC1700520308020466A1D01A908304E +:10DAF00003F0CFFB00287DD16946308809794018B2 +:10DB000053E00A212970A1880170090A417003209D +:10DB10000AE00C212970A1880170090A4170E1888E +:10DB20008170090AC170052030809DE0A08884467C +:10DB30004000401C81B2308888425BD3052959D30C +:10DB40000E202870002008E0A36842009B5A52195A +:10DB500053701B0A401C937080B26045F4D331802F +:10DB6000B6E08E49487C002873D0401E4874C868CF +:10DB700021790822C9004518A98828684018083862 +:10DB8000A16807F03EF80221684601710021417149 +:10DB900028680390A98868460181002101A8F8F748 +:10DBA0004DFC0020A880002E00D0308090E0297825 +:10DBB0008022114329702978402211432970297845 +:10DBC0008909890112312970A1880170090A4170FF +:10DBD000E288E81CA16807F014F8E088C01C3080D7 +:10DBE0002878410640D5C00972D0012168460171EC +:10DBF000002100E02BE041713188ED1C091D0181FD +:10DC00001A980390E08840190490001D634D059018 +:10DC1000297C68460176002101A8F8F70FFC074629 +:10DC200030880C303080022F06D0002F50D060E0BA +:10DC30003CE032E01CE059E06946097EE868CA0031 +:10DC400080182A7C914202D28188002902D00427C0 +:10DC50004FE02EE0697C491C69741A990160318893 +:10DC600081800020308044E04C48A188C1802FE0B2 +:10DC700029788909890116312970A1880170090A5A +:10DC80004170E1888170090AC1702289681DE168CC +:10DC900006F0B7FF2089401D46E7287880098001FB +:10DCA000183028702079687002207EE73B480A040B +:10DCB00001D405271DE00289A3889A4201D00627D6 +:10DCC00017E01E222A70012249043280490C41804B +:10DCD000009800280DD0314D00222888114683007D +:10DCE000032003F03AFF2078287107E000203080FD +:10DCF00003272A48009942888A434280384699E699 +:10DD0000F7B59AB002000C4606D0172A04D823486B +:10DD1000244B4088984202D107201DB0F0BD2378E3 +:10DD20005D0601D4DB0901D00820F6E700236D462B +:10DD30002B706B701D462378611C9F06931E1893F1 +:10DD4000531E19939BB2169302AB1793134BBF0E3E +:10DD5000DE883B0007F0E2F9208511F15EF16BF1FE +:10DD6000A3F1C6F1F2F1FBF1EEF1EDF1ECF1F1F11D +:10DD7000EBF1EAF1E9F1E8F185F1052A71D104222C +:10DD800069460A7005490A7969460A71E178A378FB +:10DD90000A021A436946CA80227905E0D819002090 +:10DDA000FE710000FFFF00004A7061788906890E4D +:10DDB0000C2923D009DC891E0B0007F0AFF90913E9 +:10DDC00052155219521B521D520012291CD004DC4C +:10DDD0000E2915D01029D1D114E0162916D01829F2 +:10DDE000CCD115E0800700E04007002839DA2AE1AD +:10DDF0000007FAE7C006F8E78006F6E74006F4E712 +:10DE00000006F2E7C005F0E7C004EEE78004ECE7A7 +:10DE10004004EAE7800724D5032AAFD105206A46EB +:10DE20001070487809780002084390800BE14007A1 +:10DE3000F1D5062A15D31898617880B2012902D04D +:10DE400002299BD101E0022700E010270622694643 +:10DE50000A7000228A8001AEA11C0236BA1C1792F9 +:10DE600018E0B6E04A780B7812021A433280801E1E +:10DE7000891C1890B21C1691384603F0E4F91699E3 +:10DE800018986B469A88C919C01BB61D521C9A80F7 +:10DE9000179A80B28242E5D900289CD1D3E00007CE +:10DEA000B9D51998694682B2072008700020888089 +:10DEB000601C891D11E0437806781B0233430B80F8 +:10DEC000C37886781B0233434B806E46121FB3889B +:10DED000001D091D5B1C92B2B380042AEBD2002AFC +:10DEE00077D1B0E0C00674D5022A72D31898082101 +:10DEF00082B2684601700021C18063780371A01C62 +:10DF000017990EE04678077836023E430E80861C4D +:10DF10004E606F46D21AFE88C0180831761C92B245 +:10DF2000FE809342EED9DAE76FE076E065E051E0FB +:10DF300046E01EE014E00AE000E0A0E0800648D5DC +:10DF400009206A46107096801698D0800FE040062F +:10DF50003FD50A22684602708680169AC28006E083 +:10DF6000000636D50B206A461070169890800291F4 +:10DF700069E0C0052DD5022A7FD318980C2182B202 +:10DF8000684601700021C18063780371A01C179955 +:10DF900013E04678077836023E430E80C6788778CD +:10DFA00036023E434E80061D4E606F46D21AFE88F2 +:10DFB000C0180831761C92B2FE809342E9D98EE7F0 +:10DFC000C0045AD5012A58D10D21684601708680B7 +:10DFD00039E052E0800450D5052A4ED30E2368461E +:10DFE00003708680C8788B78010219436846C18027 +:10DFF000521F0281601D039025E040043DD5012A97 +:10E000003BD10F20694608701DE0030435D44B78DE +:10E010000E781B023343244E3381032A2DD31B2F4A +:10E0200027D011236E46337001261F4BF603304371 +:10E03000588048780B780102194368468180D21EC7 +:10E04000C280E01C029020788006800E1B280AD037 +:10E050001D2808D00021032003F024FE1248418827 +:10E06000C90BC903418068461C99F8F7E7F92846AF +:10E0700053E610206B461870DBE70725F7E7082505 +:10E08000F5E700B50022D243074997B04A8003283C +:10E0900007D1032268460270097901710021F8F75F +:10E0A000CDF917B000BD0000D8190020FFB589B028 +:10E0B0000020019009981027FE4C1E46154608289E +:10E0C00006D0E06901F05EF8002809D03770BEE0A4 +:10E0D000288809213843108013980227017016E020 +:10E0E000E169012088710521E269C9029180E16935 +:10E0F0008872E169F0480881E16900208873288806 +:10E1000020210843288011211398042701701398B7 +:10E110000225801C0290307806900A203070E54875 +:10E120001830049001F022FA0020059020462C308F +:10E1300003906DE00998102808D1022D06D00199AE +:10E140000298A28D401A8270110AC170E08D0A995E +:10E15000884202D901F0CDF806E0884204D1069841 +:10E16000002801D030701CE00298E18D0170090A8E +:10E17000417012980088401BC01B82B2FF20C01B58 +:10E18000904200D2024607A8009002980021C319CD +:10E19000E08D01F056FA3070002805D0C0B2832817 +:10E1A00058D0E08D20833EE00598002804D0206CF4 +:10E1B00000790A282CD336E06846808BC119C9B291 +:10E1C0000191022D0DD01399019A4978914202D103 +:10E1D000228F824208D00191206C0178032908D057 +:10E1E00023E0084613994870206C0178042906D072 +:10E1F00007E000790A2818D20120059008E0E18D97 +:10E20000818002990198081802900198281885B217 +:10E210000399049801F0ADF9002804D11298008800 +:10E22000401BB84286DA022D0DD00998102806D17D +:10E2300002990198A28D081A8270110AC170129871 +:10E24000058000203070206C0078032802D0002068 +:10E250000DB0F0BD0220FBE7F8B5964A0026126D1E +:10E26000002A2ED0401F934D84B24035E88A2346C1 +:10E270000833AF8AC318BB4222D88B784F781B0271 +:10E2800010183B4303701B0A43700B79CF781A02B6 +:10E290003A438270120AC2700471220A4271224605 +:10E2A000491D801D06F0ADFCE88AA41D001980B24E +:10E2B0008049E882096D002208180270427000E06F +:10E2C00009263046F8BD30B57A4B028840339B8A28 +:10E2D000934213D9774B1C6DA3185C781D782402E8 +:10E2E0002C430BD05C791D7924022C436404640C0C +:10E2F000A41D1219028000200B6030BD822030BDA9 +:10E30000F0B585B0074600266846068155E00198BD +:10E31000417802780D0215434179027908021043D1 +:10E3200000044AD43D8003A8002301220090520239 +:10E330001946284601F085F9040044D16846018950 +:10E3400001820198417902790902114343780278E8 +:10E350001C021443AC421CD10A041AD44A04012101 +:10E36000520C89030A430096C17880780902014360 +:10E370000023204600F0C1FF040010D10199487924 +:10E380000A79000210430122D20310430871000AE7 +:10E39000487101A904A8FFF796FF0400D1D00199A4 +:10E3A00000964878097800020843694600238A8964 +:10E3B000194600F0A2FF822C05D101A902A8FFF79F +:10E3C00082FF0400A3D06846068109E001994879DC +:10E3D0000A79000210434004400C0871000A487199 +:10E3E00001A902A8FFF76FFF0028EFD0822C02D00E +:10E3F000204605B0F0BD0020FBE7F7B584B0144619 +:10E400000646002700F071FF2A480025006D00280D +:10E410002FD0059801282CD12046FFF771FF070067 +:10E4200027D1002E29D06846058118E00199487847 +:10E430000978000208432080019B009558791979DA +:10E440000202D8780A4301029F78587839431F782E +:10E4500000029B1D384300F050FF002805D101A9A0 +:10E4600002A8FFF730FF0028E0D0822800D100206A +:10E470000746002E01D00F48056500F03AFF3846E8 +:10E4800007B0F0BDF0B597B00021042003F00AFCFE +:10E49000084F00243D467C8040356C73AC73287B6C +:10E4A000B96CC00008380E18B08800280DD00120C3 +:10E4B000694603E0EC19002001280000087030686C +:10E4C000019000216846F9F7BAFAB4803C65AC8245 +:10E4D000EC8217B0F0BDFE4B9864184640300173D3 +:10E4E0001A803838D861CDE7F949002049880A07F1 +:10E4F00000D501200A06120F01D002221043CA05DE +:10E5000001D5042210438A0501D510221043490584 +:10E5100001D520210843EE494031497B002901D033 +:10E52000082108437047FFB5A7B004002898164695 +:10E530001B9022D00178E6484D064288229202467E +:10E5400040320092002D14DB8A06920E1E2A0ED055 +:10E55000229A5205520E10D13288172A0DD3009AF2 +:10E56000927B002A09D1DB4D229AAA4205D0CA0922 +:10E5700006D08A06920E122A02D003202BB0F0BDDC +:10E58000D348826C0098007B2590C0000838101892 +:10E590001F9048060CD40098407B002808D00099B2 +:10E5A00088731F99289808601F9884800220E5E7E7 +:10E5B000002718A90F7069460F72C54902AA0A649C +:10E5C000309A4A6410A90F850F861B981D46007863 +:10E5D00020908106BE4B601F24901A462C32219257 +:10E5E0002898DA691833890E1E93401C0B0006F038 +:10E5F00095FD1FFDFD11FD1AFD90FDFCFDFBFDFAD3 +:10E60000FDF9FDFCFDF8FDFDFDF7FDF6FDFDFDFD51 +:10E61000FDF5FD00032C7BD10320287017226A70C2 +:10E620000022AA70E0E2052CF5D1417802780902B7 +:10E630001143A74B10AA19831185C2788078120262 +:10E6400002435A8300297DD091427BD8002118468D +:10E6500081720181491E01841E9800F087FF052008 +:10E660002870A81C1D900220009021991E9800F08F +:10E6700080FF002803D047E018A90870F0E2944812 +:10E680002030807C012803D002206870102002E036 +:10E6900001206870022022908D48303023900022A3 +:10E6A00020A9239802F0F5FD00282AD120A800789F +:10E6B0002299814225D132880099801C511A8142C9 +:10E6C0001FDB83481D99C08D0870000A48701D9893 +:10E6D00020A9801C1D9000981D9A801C00902398F2 +:10E6E00002F0D7FD20A909781D9840181D900098C8 +:10E6F000401880B2009021991E9800F03AFF00283F +:10E70000CDD0009802288DD10A2018A908706CE29B +:10E710006DE0072C6BD341780378090219436C4BE9 +:10E720008446198310AB1985C37880781B0218437F +:10E73000674B0029588305D0814203D80121184630 +:10E74000817200E0A4E061464B7909791B020B431A +:10E75000038100218173104600F014FD00280FD1C1 +:10E760005B480121C26991710522C369D2029A8076 +:10E77000C2699172C26958491181C06900218173CF +:10E780005349E01F08841B98C01D48621E9800F082 +:10E79000EDFE07202870681C009001201D904C4859 +:10E7A0000021C18530E01D98012815D04848C16975 +:10E7B000897901292FD000981038C17B807B09020C +:10E7C000014300980170090A41700098801C009074 +:10E7D0001D98801C80B21D903D4809E013E2BEE107 +:10E7E0007AE1D8E00DE2A0E080E03BE01EE2B6E096 +:10E7F000C18D00980170090A41700098801C00903A +:10E800001D98801C80B21D9021991E9800F0B1FEC9 +:10E81000002802D006E0818DD3E731881D98081AC0 +:10E820000428C0DA1D98012800D16DE72848C16985 +:10E830008979012903D0828D26498A4205D1818DAB +:10E8400000980170090A417009E000981038C17BF6 +:10E85000827B0802009910430870000A48701D98D6 +:10E86000801CC1E1072C01D0152C78D141780378A8 +:10E8700009021943164B198310AB1985C3788078A8 +:10E880001B02034312480029438301D0994201D956 +:10E890000120F1E60E48012181720021018181737E +:10E8A000052C07D024981B99C0B2491D02F0CBFC5F +:10E8B0000028BAD100200649C04308841B9800965E +:10E8C0000195007818AB8006800E1CAA002105E097 +:10E8D000EC190020FFFF000001280000FFF7E6FB15 +:10E8E0000746FE4810A9008B08857EE1032CBCD1A9 +:10E8F000402210A90A86417802780802F74910439D +:10E90000088310A9088520A9009131886B1C491E35 +:10E910008AB2002100F095FE18A90870002830D1B5 +:10E920000B20287020A8008833E0052C9DD1802181 +:10E9300010AB1986014640780B780202E7481A436B +:10E940000283CB7889781B021943E44B1046198463 +:10E9500010AB1A85E24A914202D307208CE697E079 +:10E960003F23DE4A9B021943118421AA0092328878 +:10E970006B1C521E92B200F064FE18A908700028A9 +:10E9800003D08328B1D102272FE10D20287020A8C1 +:10E990008088401C28E120990C22C9095143C91CD8 +:10E9A0001E91A14204D92098400671D500201BE198 +:10E9B000417800780902014310A801851B9800786E +:10E9C00042062898C01C1D90002A62DA05206A467B +:10E9D00010721B980078C00944D008226846027261 +:10E9E0008181A01A87B268468782289806901E986F +:10E9F000201A81B26846C1811D980490401806F023 +:10EA000061F9079006982599C0190890491E08A831 +:10EA1000017102A83099F9F712F8074600216846FB +:10EA20000172002F1BD0022F18D1009808A9007B7B +:10EA30000979401E884210DDA848289A836CC900D5 +:10EA40005A50816C08A80079C000001D0C52009833 +:10EA50000099407B401C4873C7E00527EAE0062088 +:10EA600069460872002000901E980021201A20900C +:10EA700082B21B9B10A8DB1C008D00F03EFC0146FF +:10EA800018A80170002268460272832903D003E0AF +:10EA900093E00720E4E702271B98007840060ED594 +:10EAA0008E484188C90506D510AA018B128D914266 +:10EAB00001D100214162002018A9087094E0FF21D3 +:10EAC000013110A80186018D8448018320990184B9 +:10EAD0001D994162132085E0052C6ED3417803789F +:10EAE0000A021A4310A90A859446092269460A7245 +:10EAF0000021009101222499D20311438AB2C178E6 +:10EB0000807809021B9B01435B1D604600F0F5FB0A +:10EB100018A90870002269460A720122520210A93F +:10EB20000A86832802D0002805D099E06B48098D19 +:10EB3000018302277EE06948006D002807D0204647 +:10EB40001B99FFF789FB18A9087000284DD12B46A7 +:10EB5000324620461B9900F024FB074645E01B98EF +:10EB6000022C4078009064D1002801D0012860D1A7 +:10EB70000A2168460172009901731AAA00200099BF +:10EB8000FFF73BFC0146684641730021817302A8F0 +:10EB90003099F8F754FF07460021684601720121B9 +:10EBA000890210A80186022F08D04C48006C807999 +:10EBB000002807D018A9087020E04BE047490098CA +:10EBC000088337E0002F03D0812018A9087031E0B6 +:10EBD0001AAA01200099FFF710FC18A90870002854 +:10EBE00003D119202870012030806846007A00285F +:10EBF00004D002A83099F8F722FF0746002F2BD047 +:10EC000018E0062038E522993448090711D5012C6F +:10EC10000FD10B2269460A72C08888810021042026 +:10EC200003F040F8082010A90886BFE620984006A7 +:10EC300010D50327294810AA4188128E114341801C +:10EC40005005400E04D01F99289808601F988480B2 +:10EC5000384693E404200FE518A8007800280ED069 +:10EC6000012028701B980078687010A8008DA8708B +:10EC7000000AE87018A8007828710520308017482D +:10EC800010AA4188128E91434180E1E7FFB5064604 +:10EC90009FB000201B903178012088401149124A12 +:10ECA000084010A908860D494988914203D00028E0 +:10ECB00004D0080702D5012023B0F0BD219D002714 +:10ECC0002F7020983C46018810A8018418A807716D +:10ECD00000F00BFB6846077202A907E0EC19002060 +:10ECE0000102000009F80000FFFF0000FA4801647B +:10ECF00001464031826C1A91097BC90008395718C6 +:10ED000022994164307801282AD0022809D00328AA +:10ED100079D12878800980011D302870EE48B188AB +:10ED2000C1803078022804D12878800980011B3006 +:10ED3000287001A8009010A8008CEB1CC01E82B2A5 +:10ED4000B088002100F07DFC0028E1D1B188697015 +:10ED5000090AA9706946888810A9C01C08842DE199 +:10ED6000717918A801713079012802D00228CFD119 +:10ED7000E6E0D9487F2340881B010246184010ABCB +:10ED80001886802840D006DC102810D020280ED00D +:10ED900040280AD120E0FF38013859D0FF38013827 +:10EDA0006AD0FF38FF3802387ED0052491E0D006C3 +:10EDB00001D5082000E010201B900420694608724D +:10EDC0000020888118A800900195318919AB1CAAF0 +:10EDD0001B98FFF76BF977E0BF4B3289188B8242A3 +:10EDE0004FD10A221B92002973D101A9009110A9C9 +:10EDF000098C6B1C491E8AB2002100F022FC18A964 +:10EE000008710B2017E0F6E0B34B3289188B824271 +:10EE100037D10C221B9200295BD101A9009110A9C6 +:10EE2000098C491E8AB21946098C6B1C00F009FC3A +:10EE300018A908710D2028706946888810A9401CFF +:10EE40000884042069460872A348008B888140E04A +:10EE5000A14A3389108B834213D112231B930029BB +:10EE600037D1536A002B05D00091128C00F045FA7F +:10EE700018A9087113205EE097483289038B9A42E3 +:10EE800001D00424E7E016221B92026D002A09D16A +:10EE9000F268002A06D002651A98328A82821A9A8B +:10EEA0000020D082002900E02FE012D1B888396814 +:10EEB000FFF7D2F918A9087100280AD1B8882B46A3 +:10EEC00018AA396800F06DF90446022818D0042CFD +:10EED00016D0B88800280FD06846007A002804D0E1 +:10EEE00002A82299F8F7ABFD044601206946087292 +:10EEF000386803900020B880002C5FD0052C7BD0B0 +:10EF00006846007A032873D0A5E018201B900029DA +:10EF100005D071483189018300210165D9E76E4828 +:10EF20000246017E18320120FFF767FA18A908711E +:10EF30000028CED119202870012010A90884C8E724 +:10EF40001A98407B002856D0307AC0001358001D14 +:10EF50000193105A1D9000291AD100F0CAF9062019 +:10EF600069460872002000901D980F3882B20198FF +:10EF70008178437808021843019B0021DB1C00F0D4 +:10EF8000BCF918A90871002269460A72832830D09A +:10EF9000002118A8017110A801840121684601729E +:10EFA000019803901A981A99407B401E48731A984A +:10EFB000807B002802D01A99401E887310A8008E0A +:10EFC0007F21090102468A431DD043480022008860 +:10EFD00011468300042002F0C0FD3F4831780171E2 +:10EFE00010A94088098E08433B4948800FE003E0A0 +:10EFF0002BE002242FE00524374810AA4188128E06 +:10F000009143418027E034494A8882434A806846D8 +:10F01000007A002805D03048416C02A8F8F70FFDAF +:10F02000044618A80079002815D01B9868700120A4 +:10F0300028702948008BA870000AE87018A8007989 +:10F040002871052110A8018405E02348416C02A81D +:10F05000F8F7F5FC044600F04CF91F4840884005DD +:10F06000400E20D11A98807B00281CD1B888002837 +:10F0700019D0209910AA0988118422990091396821 +:10F0800018AA219BFFF74FFA044602280BD0012053 +:10F09000694608723868039002A82299F8F7CFFCF5 +:10F0A00004460020B88010A8018C209801802046DA +:10F0B00002E600B50022D243074997B04A800428EF +:10F0C00007D1022268460270097901710021F8F720 +:10F0D000B6FC17B000BD0000EC19002010B5394C8B +:10F0E00003780022216C012B02D0022B44D126E0B0 +:10F0F0000B78002B01D0042B03D10A71226C032161 +:10F100001170216C83880A79D200921D8B52216C78 +:10F110000A79D20008328918C2880A80216C0389D2 +:10F120000A79D2000A328B524289206C0179C900D7 +:10F130000C314252216C0879401C087120E00A749D +:10F14000226C81889180216CC288CA80226C0189DE +:10F150001181226C41895181216CC068C860616C49 +:10F16000206CF8F76CFC0146022807D0206C007C6C +:10F17000002802D1002903D0812010BD832010BDBA +:10F18000002010BD8178012909D100880521C9021C +:10F19000884202D0491C884201D1002070470520D6 +:10F1A000704710B51488844201D2052010BD172481 +:10F1B0001C701080421E491C581C05F022FD0020C6 +:10F1C00010BD0000EC19002010B58B78002B11D079 +:10F1D00082789A4207D10B88002B0BD003E0091DDF +:10F1E0008B78002B08D08B789A42F8D103880C8852 +:10F1F000A342F4D1002010BD812010BD10B500291C +:10F2000002D001290DD102E00088000501E000884C +:10F210008004800F07D001281CD0022809D00328C1 +:10F2200010D0812010BD002901D0032010BD022084 +:10F2300010BDF5F733FE03280CD004280AD00028AF +:10F2400006D009E0F5F72AFE042803D0022803D0EF +:10F25000052010BD002010BD0F2010BDF3B5C81C47 +:10F2600080080E46800081B0B04201D08620FEBDED +:10F27000FE4C354626600198A08000202081E08069 +:10F2800014E0B807A978800D0843F94905F033FD6B +:10F29000E088401CE080B80607D42089401880B27E +:10F2A00020810199081A8019A8600C352F887807E9 +:10F2B000E7D40020A072FEBDEC480C22C188008972 +:10F2C0005143081880B2704770B51346E74A451895 +:10F2D0009488AC4201D2842070BD126810180A468E +:10F2E000194605F08EFC002070BDE04901208872AF +:10F2F0007047DE49002088727047FFB589B09704D7 +:10F300000E460546BF0C029200F034FA040021D0EC +:10F31000002069460873D548807A012812D001215F +:10F320002046FFF76BFF002815D12078400609D54D +:10F330000221684601730582218841828682C78244 +:10F340000C9806900298000407D500273E46012538 +:10F3500001970CE001200DB0F0BD2078A178800766 +:10F36000800D0843C249019005F0C5FC0D46029886 +:10F3700040040AD50198A84207D12088E178800589 +:10F38000800F00020843B04201D3AE4201D90720EA +:10F39000E1E7B81980B20290A84201D90D20DAE75E +:10F3A0006846007B002804D003A8F8F744FB002837 +:10F3B000D1D10198A8420BD12088032109028843AA +:10F3C00002998905890F0902084320800298E0709C +:10F3D0001298002800D007800C9800280CD02078C4 +:10F3E000000609D4A0683A4680190C9905F009FC7A +:10F3F00020881021884320800020ACE7FFB59B4D7A +:10F4000081B00E46E8882F680C21009048433C18D4 +:10F410009749039805F06FFC0A462889E11B84464A +:10F420000C314018318880B28B0601D5002300E0F2 +:10F4300013461818AB8880B2834202D8842005B0E6 +:10F44000F0BD0098894D401C80B2E88021800D9964 +:10F45000002900D00C600399A170E2702188039DFF +:10F460008908AD058900AD0F294303252D02A94365 +:10F470009505AD0F2D0229430425294321800C99C0 +:10F48000002900D0088001998978A1710199098823 +:10F49000A1803178890601D50B9905E07349624452 +:10F4A00092B20A81991AC919A16000212173327898 +:10F4B000920601D50020C2E700910B9B0A9A04999D +:10F4C000FFF71BFFBBE7FEB5044600F053F907004A +:10F4D00008D0664D641EE8880190A6B228683446BC +:10F4E000009015E00120FEBD0C2000996043095AF0 +:10F4F0008A060BD489078A0D0099801C085C5C4938 +:10F50000104305F0F8FB2889401A2881641CA4B236 +:10F510000198A042E8D8EE8000203870FEBD002897 +:10F5200003D0401E0880002070470120704710B5AE +:10F530004E490288CB889A4201D3822010BD0B68C5 +:10F540000C21514359180B88CC789B059B0F1B024B +:10F55000234341608C7904738C884481C38189681A +:10F56000521C016102800281002010BD0121018234 +:10F570007047FEB505460020C043088068680F4606 +:10F58000817868468170686801886846018000213A +:10F590008171288A2C88A04200D304462C8234E052 +:10F5A000288A401C2882301D6968FFF70DFE00285C +:10F5B00029D139882F48814201D1601E388068885E +:10F5C000A04227D33088F1788005800F00020843DD +:10F5D00002906946301DFFF7F7FD002813D12989F5 +:10F5E000244881421AD000213046FFF707FE002848 +:10F5F00009D12A890298824205D1E968B06805F0EC +:10F60000D3FA00280AD0641CA4B2204600F0B2F855 +:10F610000600C5D1641E2C828220FEBD7C80B0799C +:10F62000B871B088B8803088388130788007810D13 +:10F63000B078014379810298B881B06838610020C0 +:10F64000FEBDFFB585B014460F46059800F092F850 +:10F65000050037D00548BE05807AB60D01281CD0BC +:10F6600000212846FFF7CAFD002805E0441A0020C3 +:10F6700001020000FFFF000022D1287840060CD5CF +:10F68000012168460170059981802988C180068121 +:10F690004481F8F7D0F9002812D12888AA78810788 +:10F6A000890D11438005800FEA7800021043BE42A5 +:10F6B0000AD0374A914207D3611E814204DD0B20F4 +:10F6C00009B0F0BD0120FBE7864201D90720F7E72A +:10F6D000801B82B2A24200D922460E98002800D098 +:10F6E00002800898002804D0A8688119089805F0BD +:10F6F00088FA0020E4E770B514460D4600F03AF8A9 +:10F7000000280DD001882980002C0DD00178807848 +:10F710008907890D01431E48814203D2012002E07E +:10F72000012070BD00202070002070BD70B516460D +:10F730000D4600F01FF804000DD02D882580FF2E07 +:10F7400016D0A807A178800D0843114905F0D3FA17 +:10F75000002E06D101E0012070BDFF31FF310331E1 +:10F7600089B2A170A80880008905890F084320800C +:10F77000002070BD0749CA88824207D3002805D0FF +:10F780000C22096850430C38081870470020704755 +:10F7900001020000441A0020F0B585B00E4605466F +:10F7A0000020694608707078FE49C00003900C582C +:10F7B000FD4F002D0ED0022D73D0002C72D020787A +:10F7C000801E030005F0AAFC09837F7F7F83797F79 +:10F7D00077727F00002C03D1F4A16B2005F0ADFB04 +:10F7E0002078801E030005F099FC09065E5E5E1914 +:10F7F000365E50545E003078062803D0EBA17620A8 +:10F8000005F09BFBB8687168806C032205F0F9F97C +:10F81000012069460870002835D1CEE730780C28E1 +:10F8200003D0E2A1812005F088FBE0680078002881 +:10F8300006D0B8687168806B102205F0E2F928E004 +:10F84000B8681021006B05F039FAB868816A006B5E +:10F850000A787168F1E730780D2803D0D3A194209D +:10F8600005F06BFB042069460870716848780978D8 +:10F8700000020843B9684A6A5178127809021143B4 +:10F88000484069468880084608E0C8A1AF2005F0D6 +:10F8900054FB6846007800288FD06846F5F703FBD4 +:10F8A0008BE727E01CE0C1A1B420F0E7B8686169EC +:10F8B000006CFEF708F8A16900E0E168B868006C28 +:10F8C000FEF701F803E0B9A1E32005F036FBB868C4 +:10F8D0002146006CFDF7F7FFB24A03990020505013 +:10F8E000022D07D0002D05D0012D03D0AFA1EF20B0 +:10F8F00005F023FB05B0F0BD10B501780124012906 +:10F9000002D0022910D112E04268A748002182608B +:10F910000170A4486C38C166016741678167D2896C +:10F9200002214C3001F0E1F90024204610BDFF20F7 +:10F930009EA1163005F001FBF7E7F0B505469EA144 +:10F9400003C997B014911390002008A90875954930 +:10F950002A781031944C0491217805910126914F19 +:10F96000A168130005F0DAFB0CEF07309AF0EDEC1C +:10F97000EBEAE9E9E8EF20700124FF264F3605465F +:10F9800010A80570457001F0C1F90746012803D0A1 +:10F9900086A1304605F0D1FA10A93846FFF7FCFEE3 +:10F9A0002046641EE4B20028EAD10A2069460870A5 +:10F9B0006846029501F088FA002803D0FF207BA159 +:10F9C000583068E0002646E3C86A0078C0072FD0A8 +:10F9D000012069460870684601F076FA002804D0D4 +:10F9E000FF2072A16B3005F0A8FAA068006CFDF74B +:10F9F00061FF050004D1FF206CA16E3005F09DFA77 +:10FA000008984078C0003D5006202870A068016822 +:10FA100069600069A8606448C01CE860284601F07D +:10FA200053FA022804D0FF2060A1783005F085FA4F +:10FA3000A068C06A00784007C4D5012069460870F4 +:10FA4000684601F041FA002804D0FF2057A1803019 +:10FA500005F073FAA068006CFDF72CFF050004D1D7 +:10FA6000FF2052A1833005F068FA08984078C00062 +:10FA70003D5006202870A068016869600069A86090 +:10FA80004948401DE860284601F01EFA022899D036 +:10FA9000FF2046A18D3005F050FA93E7A9680029B0 +:10FAA00033D0694608712979012932D0022904D05E +:10FAB000FF203EA1A73005F040FA3A48102210304E +:10FAC000A96805F09EF83748103036492031486063 +:10FAD0002078C1062CD5EF2108402070032069460C +:10FAE0000870304810300290684601F00FF9044663 +:10FAF000022808D0002C06D0012C04D0FF202BA116 +:10FB0000B83005F01AFA69466FE101216A461171B1 +:10FB1000DBE7244A04996C3AD06748608860C86083 +:10FB20000621A86803F0FCFE1E4910310860CAE7F0 +:10FB300020210843207045E7A1E15AE119E1E6E000 +:10FB400086E056E000E081E2886C40798009012877 +:10FB500004D0FF2015A1CC3005F0EFF9A068017AA0 +:10FB6000002906D1416B406801F01FFAA16801200D +:10FB70000872012069460870684601F0A5F900285E +:10FB800004D0FF2009A1D73005F0D7F9A068006C98 +:10FB9000FDF790FE050004D1FF2004A1DA3005F046 +:10FBA000CCF90DE0BC1A0020B40000207372635C35 +:10FBB000736D2E630000000004411A8800A48000C9 +:10FBC00008984078C0003D5002202870A068416B22 +:10FBD0006960806CC01CA860284601F075F90400BB +:10FBE00004D0FF20FD49E23005F0A7F9294628316D +:10FBF000FBE01722684602720122027080788208B8 +:10FC0000287992008007800F024368468270FB20AB +:10FC1000024028794007C00F800002436846827086 +:10FC2000EA8882804A6C02A901F090F9002804D089 +:10FC3000FF20EA49F73005F080F9052108A8017591 +:10FC40006846017A0187A0680026406C0F9006E2A2 +:10FC5000012069460870684601F036F9002803D093 +:10FC6000DE49DF4805F069F9A068006CFDF722FE67 +:10FC7000060004D18320D949800005F05EF9A06810 +:10FC8000006CFDF717FE1290002804D1D448D34928 +:10FC9000801D05F052F9D3488068006CFDF70AFE1C +:10FCA000040004D1CE48CD49093005F046F9089842 +:10FCB0004078C0003E500A203070287A3071686861 +:10FCC000C84DB060A868406C30611720307312983E +:10FCD000B4617061304601F0F7F80446022808D09C +:10FCE000002C06D0012C04D01120BC49400105F0A5 +:10FCF00024F92046316AFFF74FFD2878052101409D +:10FD0000042900D05EE6FB21084028702AE005980F +:10FD100040084000207082071CD5FD221040207052 +:10FD20000F206A46107017201071486C02906846C8 +:10FD300000F0ECFF0546022808D0002D06D0012D6A +:10FD400004D0A748A5493A3005F0F7F86946284697 +:10FD5000FFF722FD2078052101400429D2D1FB21A3 +:10FD600008402070072008A908759E48807808760A +:10FD700028E6012069460870684601F0A5F80028C9 +:10FD800004D097489549543005F0D7F8A068006C26 +:10FD9000FDF790FD060004D113209049400105F0C5 +:10FDA000CCF890488068006CFDF784FD040004D115 +:10FDB0008B488A495A3005F0C0F808984078C0004E +:10FDC0003E500720307087488068406870606868DF +:10FDD000F460B060304601F077F8040004D0804849 +:10FDE0007E49653005F0A9F8316A2046FFF7D4FC5A +:10FDF000E8E5012069460870684601F065F80028CA +:10FE000004D0774875497A3005F097F8089840781B +:10FE10001190A068006CFDF74DFD060004D1512043 +:10FE20006E49C00005F089F8A068006CFDF742FD3E +:10FE3000040004D16A486949823005F07EF81198BF +:10FE4000C0003E50C01929694160092030706868BF +:10FE50007060A868B060A889B081634830611030D4 +:10FE6000B4617061304601F02FF8022804D05C487C +:10FE70005A49903005F061F811982875A2E55A4A60 +:10FE800000208C32107002206B4618700192287985 +:10FE9000002801D0107098E0524803230C304068CD +:10FEA000FB2703708378504A9B089B003B4083707C +:10FEB0004B7A00271B07DB0F43708C3257600B7B9C +:10FEC000C370CB7A1372537A0C7D5B08E4075B0036 +:10FED000E40F23430C461534D460FD242340CC7E2C +:10FEE000E407A40F234353720B461C33136147717D +:10FEF00007718B7A3B4A9C070C32A40F1268012CC5 +:10FF000004D19478A407A40F012C1DD09B089B005A +:10FF10008B7293785B0702D48B7A5B0728D54B7A78 +:10FF200013AF5B075B0FDC005B00E3181478640021 +:10FF30001B19DBB2DC083C5D5F077F0F0623DB1B70 +:10FF4000DC40A3079B0F14E04C7A53796406640FDE +:10FF500023404371147906273C400471E4001C439C +:10FF6000204B5C7083789B089B005B1C8370D0E700 +:10FF700000238478FB273C408F7A7F07FF0FBF0068 +:10FF80003C4384704C7A6407640F047050780128F5 +:10FF900007D1487A000704D5032008A90875022074 +:10FFA0002DE0022B27D0012B2BD00F4B0020049AE1 +:10FFB000D86750609060D06018467C30024610329E +:10FFC0005060887AFB2210408872684600F09EFEDE +:10FFD000040035D0012C34D0004907E0ACFB000010 +:10FFE00009020000B4000020501A00206520C00063 +:10FFF00004F0A3FF25E0032008A908750120087676 +:020000040001F9 +:10000000E3E77E4C0D21E01C04F058FE2046103042 +:100010004460022008A908750E94A868002807D03B +:100020000068206005997648202211430170CCE7D2 +:1000300005980007C9D57349734804F07EFFC4E7EB +:10004000002669462046FFF7A7FB04E06E486D498D +:10005000203004F072FF08A8007D002802D00DA80F +:10006000F4F721FF304617B0F0BDF0B597B00C465D +:10007000054600206946087061482F785F4E017878 +:10008000583E82683B0005F049F80BAA8407263BDE +:100090004C6B79798F9CAA002B20694608730CA9B8 +:1000A00003A8FDF73DFC002804D0574855494130CE +:1000B00004F043FF55490D9804F01DFE4F480160C0 +:1000C0004F4869680C300160AA68426001910820BD +:1000D000694608708CE08A0610D5DF221140017055 +:1000E00003202070454810304168A1604068002816 +:1000F00002D00020207177E00120FBE7102256E0BB +:100100002B20694608733D4903A85C39FDF708FCBC +:10011000002804D03C483B496A3004F00EFF04201C +:100120001BE02A206946087303A810220230696880 +:1001300004F067FD07A810220230A96804F061FDF1 +:100140002E4903A85C39FDF7EBFB002804D03920C9 +:100150002C49000104F0F1FE05202070666043E0A8 +:100160002A79002A02D00122114301700520694634 +:10017000087028798880A868029039E0D06A402306 +:10018000018819430180D06B6968102204F039FDA1 +:100190002AE0FB2211400170062069460870A96818 +:1001A00068680291019023E0CB0703D0022211433B +:1001B000017058E70F20207017202071506CA0604C +:1001C00012E0937A9B0706D0D26A44781388FF34F2 +:1001D00001342343138004221143017004E00A48D0 +:1001E0000849BD3004F0A9FE684600780028E0D038 +:1001F0006846F4F758FE36E701207047CC1A002015 +:10020000B4000020ACFB00001503000040420F00CA +:1002100070B504780D460646230004F07FFF0B1CE2 +:10022000181C1C1C1C07181C1C181C000021052075 +:1002300001F038FDB068007805280CD0FA4800229B +:10024000008811468300052001F087FC03E00021AF +:10025000052001F027FD002D0ED000202870294632 +:100260003046FFF702FFF1482978005D884201D14E +:10027000032070BD022070BD00213046FFF7F5FE5F +:10028000002070BD30B5E8494B68497A0A01114633 +:100290000C315C5C032C0CD0044600252034257105 +:1002A00025725C5CA500AA18641C5C54985003205D +:1002B00030BD062030BDF0B50446264620360D463A +:1002C0003279012008218FB0002A0CD0012A21D0D8 +:1002D000022A2BD0032A04D12A78052A01D12970B9 +:1002E00000200FB0F0BD01203071606800280AD0F6 +:1002F000A069017061684160216981606169C160C4 +:10030000FFF7C0FFEDE7072028702069686060698B +:10031000A86009E029780729E3D10220307105207F +:100320002870C248203868600320DAE72978052958 +:10033000D7D1A08910280AD9103880B2A081A1682D +:100340001023091803A86A6800F054FE2DE0102855 +:1003500004D0C1B20BAA1020A76809E010232269BB +:10036000A16817E0491EC9B2401EC0B27B5C13549D +:100370000029F7D100280AD0401EC0B280211154B4 +:10038000002102E0401EC0B211540028FAD1626977 +:1003900010230BA907A800F02DFE102307A903A81E +:1003A0006A6800F027FE032030716068019003A89E +:1003B000029005206946087029466846FFF728FF25 +:1003C0008FE7F0B5044626460D46203631790120E8 +:1003D0008DB000290BD0012938D0022905D1297808 +:1003E000052902D10920287000200DB0F0BD217D23 +:1003F0006846CA07D20F02738807C10F68460174A6 +:10040000012203A905A800F0EDFD04A9012205AF12 +:10041000481D00F0E7FD0722B81CE16800F0E2FD8E +:1004200007A807220130216900F0DCFD6068019017 +:1004300009A80290102305AAA16800F0DBFD0120A5 +:100440003071052168460170294621E02978052987 +:10045000CBD1062203A8E16900F0C4FD04A806225E +:100460000230A16900F0BEFD042106A800F0B2FD33 +:100470006068019007A80290102303AA696800F041 +:10048000B9FD02203071052069460870294668468A +:10049000FFF7BEFEA9E7F0B5074685B00D46002080 +:1004A000694608703E4662482036327981791338B1 +:1004B00001240078130004F031FE180DFEFDFCFB52 +:1004C000FAF9F8F7F6F5F4F3F2F1F0EFEEEDECEB04 +:1004D000EAE9E8E7B968039100291BD001226946DF +:1004E0000A7003220A710A224A7139690291397924 +:1004F00000297DD0039A1278002A7AD00C2A78D26B +:10050000130004F00BFE0BEF09EF354D8498B0F1AA +:10051000EDECEF000020C8E30021062001F0C2FB53 +:100520003879072866D1424C133C2078022802D043 +:1005300000287FD101E00020207003980079C11FBE +:100540000A2901D30A2598E1607039480722C01FA3 +:10055000039900F047FD01203071207002206946A8 +:1005600008703348801F01903869401C029037E2C0 +:1005700011293DD12E4C133C0228DAD160686178F4 +:10058000007A884201D9062577E10399264810228E +:10059000491C303800F026FD03202070022045E180 +:1005A0001129E6D1224C133C0428C2D10520207029 +:1005B00003991D481022491C203800F013FD062025 +:1005C0003071786903210170626851684160164991 +:1005D0002039816021460C31C160C91D0161017D56 +:1005E000537A49084900DB07DB0F1943017502E024 +:1005F00070E354E384E1D3688361FD231940537AA7 +:100600009B07DB0F5B0019430175116976E1022935 +:10061000AFD1002867D0052069460871039840785B +:1006200048713869029051E3201B00209C51010061 +:10063000DB00002082E011299BD1F74C06287DD1F8 +:10064000A0680399806B1022491C00F0CBFC0621A6 +:100650006846017038690290002168460171FFF711 +:10066000D7FD072057E00B299BD1EB4C07287ED103 +:10067000A0680399006B0222491C00F0B3FCA0683B +:100680000822406B039917E00EE116E3FDE2DDE27C +:10069000C7E2BCE29EE267E248E241E21FE2F5E126 +:1006A000DFE1C8E1BEE1B1E1A5E16AE147E128E1AE +:1006B000DAE0BEE0AFE075E0C91C00F093FC062173 +:1006C0006846017038690290002168460171FFF7A1 +:1006D0009FFD204613304179490849003EE041E042 +:1006E0001BE001E05CE0EFE2112991D1CA4C08283F +:1006F0003DD1A0680399C06B1022491C00F072FC28 +:10070000062168460170386902900021684601712F +:10071000FFF77EFD09202070C9E208298CD1BE496F +:10072000092824D1039842788868016C0A700399DB +:10073000406C0622891C00F055FC00E017E0062101 +:100740006846017038690290002168460171FFF720 +:100750005FFDB14813304179FD221FE041715EE237 +:100760003071F2E11129C0D1AB490A2801D0082526 +:1007700083E088680399806C1022491C00F032FCE9 +:1007800006216846017038690290002168460171AF +:10079000FFF73EFDA04813304179FB221140DDE711 +:1007A00007256AE0297802297ED19B490128FBD1DF +:1007B0006A684A6015780846002D5CD106216A46B1 +:1007C00011703969029107211171029902240C708C +:1007D000CA785207520FCA704B795B075B0F4B7197 +:1007E0008B795B075B0F8B71D20701D18A714A71DC +:1007F00005460A794078824200D26A70864807220C +:10080000133000F0EFFB00202C7030710146684679 +:10081000FFF7FEFC4BE229780429C5D103286FD1EC +:1008200008227E48696800F0DDFB03203071042057 +:10083000F2E129780429B7D1774F0328B4D177485A +:1008400008220830696800F0CDFB04203071786818 +:100850004168002906D003212970002129714068D0 +:10086000A86072E10320D7E1287803289CD1287979 +:1008700000281AD00546002D16D0062168460170C2 +:1008800038690290022168460171029805210170C1 +:10089000457000216846FFF7BBFC012168460170E6 +:1008A00004210171457115E293E15B49A86849682B +:1008B0000028486001D15A484860052030717869A5 +:1008C000032202704A684260544A8260524A0C32E3 +:1008D000C260D21D0261027D4B7A5208DB075200D2 +:1008E000DB0F1A430275CB688361FD231A404B7AF4 +:1008F0009B07DB0F5B001A4302750969C16130E198 +:100900000DE12978092988D14349032885D104209C +:100910000870062069460870386902901120087135 +:10092000029803210170401C1022696800F05AFBF4 +:1009300000216846FFF76CFC00203071B7E1297890 +:10094000092993D1052891D134496A6820391020AA +:10095000401EC0B20B5C145CA34203D000200425EF +:1009600030718AE70028F3D10720307178690421BB +:1009700001702949496849684160284981601039F6 +:10098000EEE028780A28BED106206946087038694A +:10099000029011200871029804210170401C10225D +:1009A0001E4900F01FFB00216846FFF731FC1A4882 +:1009B000102140786A68091AC9B2101800F00AFBC1 +:1009C0006868019014481330C178C9070BD0817949 +:1009D000002902D14079002805D0082030711BE1A0 +:1009E00029466846EFE007206946087000216846FE +:1009F000FFF70EFC5FE128780E2884D1064869686D +:100A000081608969407808700920A9E6C80701D08B +:100A10000A20FFE00F20A3E6C8000020101B0020E2 +:100A20007C51010028780F2879D1A868386128798D +:100A300038730B20FAE628780428F5D1FC4C696855 +:100A4000A0680822006A00F0CDFA0C2030717869A5 +:100A50000722B9690270A268D3684360126A826093 +:100A60007EE028780D28DFD1F14C6968A068022368 +:100A70000269C06900F0BEFA0D2030717869062164 +:100A80000170A1688A684260096966E028780C28CC +:100A9000CAD1E74C6968A0686278406A00F0A2FA9F +:100AA0006078A2681021091A526AC9B2101800F0C1 +:100AB00091FA062168460170386902901122684651 +:100AC0000271029810220170A168401C496A00F06E +:100AD00089FA00216846FFF79BFB0E206EE028781C +:100AE0000F2876D1062168460170386902900B21E3 +:100AF00068460171029C0720CD4D2070A868022233 +:100B0000C169601C00F06EFAA8680822016AE01C46 +:100B100000F068FA00216846FFF77AFB7AE7C8E040 +:100B2000880701D5102075E0132019E628780F28D2 +:100B30004FD1A86838612879387311203071BC48CA +:100B4000816848690078002801D00324CAE07869E8 +:100B500006220270C9684160B6498160B549091D25 +:100B6000C160FFF78FFB30E0B148806841690978C8 +:100B700000290CD129780C292BD1AD4C6968806AE9 +:100B8000102200F02FFAA16801204969087006219F +:100B90006846017038690290112168460171029817 +:100BA00008210170A249401C89681022896A00F05E +:100BB00019FA00216846FFF72BFB1220307109213A +:100BC000684601702946FFF723FB044601287DD0C3 +:100BD00088E06FE028780F286CD1062069460870FD +:100BE0003869029008200871029809210170904923 +:100BF00089680A78D207D20F427049680622801CA1 +:100C000000F0F0F900216846FFF702FB8CE7480787 +:100C100005D514203071092069460870E0E61620D9 +:100C20009EE528780F2851D1A86838612879387353 +:100C3000152030717869062101707D4989688A68BC +:100C40004260096981607B49891D89E728780C2801 +:100C500045D1774C6968A0681022C06A00F0C2F9DB +:100C600006206946087038690290112008710298C0 +:100C70000A210170A168401CC96A102200F0B2F973 +:100C800000216846FFF7C4FAC9E769481330407984 +:100C9000002810D0C10703D065480621017006E086 +:100CA000800701D5082000E00A206149087000246F +:100CB00018E00BE013E0172052E55D49002805D04D +:100CC0000020307108700A20694608706846007874 +:100CD000002804D000216846FFF79AFA00245448FF +:100CE00000210170204605B0F0BD10B5524BFF2425 +:100CF0005C72586019721A80002204E0491EC9B261 +:100D00000B010C33C2540029F8D110BDF0B54A4E86 +:100D10000546717A01208DB0FF2971D00127727AC2 +:100D2000736811015C180C31595C8900091F645803 +:100D30006A7021780B0004F0F1F90B960709272C53 +:100D400059888D4A4F5492002F707CE02146203103 +:100D50000A9109790120002902D0012967D10EE00A +:100D60006068019005A802900D21C01C00F032F9C6 +:100D7000032205A8A16800F035F90A984EE0297809 +:100D8000052974D106215DE029462046FFF719FBAD +:100D900069E021462031069109790120002902D01D +:100DA000012964D10EE06068019007A80290082232 +:100DB000E16800F017F9082209A8A16800F012F90B +:100DC00006982BE02978052951D10A213AE02946D5 +:100DD000204600F01AF946E029462046FFF76BFA54 +:100DE00041E029462046FFF756FB3CE021462031F2 +:100DF000059109790120002903D0012937D11DE08F +:100E000056E06068019007A802900822A16800F0EF +:100E1000E9F8082109A800F0DDF80598694607718E +:100E20000520087029466846FFF7F2F91BE00BE041 +:100E3000C800002074510100201B002029780529DA +:100E400015D10B212970002011E02946204600F021 +:100E500023F908E02946204600F04EF903E0294630 +:100E60002046FFF7C9F9002801D001280CD12562DE +:100E7000717A736809010C315A5C521E1206120E07 +:100E80005A5401D003204AE70328FCD0737A7268D1 +:100E900019011D010D312C46515C7172FF270D3473 +:100EA00017550C35545D002C02D0FF2903D1737205 +:100EB0000DB0F0BD21460C010D34145DFF2CF9D1AD +:100EC00009010D315354F3E770B5AD4C0546607A16 +:100ED000214603464A6811E0010108460C30105CC7 +:100EE00008E0401EC0B286008E199659AE4201D16C +:100EF000042070BD0028F4D10D31505CFF28EBD1E7 +:100F00009F480021007A01E0491CC9B2884204D9F7 +:100F10000E010C36965D002EF6D1884201D80520D0 +:100F200070BD08010D30135461722846FFF7AAF90D +:100F3000032806D0617A626809010D31515C617243 +:100F400070BD28462830FFF7E1FE70BD10B504786B +:100F50000123012C14D10C78022C11D30B23137014 +:100F600083785B075B0F537002220A708088002829 +:100F700005D0830000221146062000F0EEFD00237C +:100F8000184610BD0EB50022012105280AD00628FA +:100F900007D1684601700221017142710021FFF7FB +:100FA00064F80EBD68460170F6E710B58EB00C46C9 +:100FB00006216A461170019072480290001D03904C +:100FC0006846FFF781FF102220460B9900F00AF8CF +:100FD0000EB010BD002202E0491EC9B242540029E1 +:100FE000FAD1704703E0521ED2B28B5C8354002AC0 +:100FF000F9D1704730B505E05B1EDBB2CC5CD55C47 +:101000006C40C454002BF7D130BD3EB504462030AF +:101010000D4602790121002A02D0012A3AD10FE0BF +:101020006168019157490831029101210171052040 +:101030006946087029466846FFF7EAF8014629E044 +:101040002878052826D169681022A06800F087F862 +:101050006868C07B000606D54A4AA068102318328B +:101060000146FFF7C7FF1022A168E06800F077F89B +:10107000A068C07B000606D5424AE06810231832FB +:101080000146FFF7B7FF07202870A0686860E06896 +:101090000021A86008463EBDF0B5044626460F462E +:1010A00020363179012089B0002909D0012905D1E4 +:1010B0003978052902D10C203870002009B0F0BD24 +:1010C000606803AD01900295022203A8A168FFF7B2 +:1010D00089FF0222A81CE168FFF784FF0C21281D6C +:1010E000FFF778FF01203071052069460870394606 +:1010F0006846FFF78DF8E1E710B5034620331C7909 +:101100000122002C04D0012C10D0022C25D11EE08D +:1011100001211971C16806220A70406848601948A7 +:10112000801C8860801CC86008460CE00C780C2C81 +:1011300013D102221A71C2680523137049685160E5 +:10114000806890601046FFF79DF8024605E0087839 +:101150000B2802D10D2008700022104610BD10B5DA +:10116000002409E00B78521E5B0023430370401CEF +:101170000B78491CD2B2DC09002AF3D110BD000063 +:10118000201B00207451010070B50D46040012D0E0 +:10119000002D10D02101284603F090FD1022544963 +:1011A000284603F02EFD5248012108380180448072 +:1011B0004560002070BD012070BD70B54C4E00240C +:1011C0000546083E11E0716820014018817BAA7B2A +:1011D000914209D1C17BEA7B914205D10C2229467B +:1011E00003F0E2FC002806D0641C30888442EADB6D +:1011F0000020C04370BD204670BD70B50D4606008E +:101200000AD0002D08D03A4C083C20886188401C48 +:10121000884203D9042070BD102070BD3046FFF70E +:10122000CCFF002801DB401C0AE020886168000137 +:1012300040181022314603F0E4FC2088401C208036 +:101240002870002070BD70B514460D001FD0002C12 +:101250001DD00021A170022802D0102817D108E06B +:10126000687829780002084311D00121A17010800C +:101270000BE02846FFF7A1FF002808DB401CA07008 +:10128000687B297B000208432080002070BD01207C +:1012900070BD70B5054614460E000AD000203070AF +:1012A000A878012807D004D9114908390A88904242 +:1012B0000BD9012070BD002C04D02878207028881C +:1012C000000A50700220087010E0002C0CD0496811 +:1012D0000001411810391022204603F092FC2878B2 +:1012E00020732888000A607310203070002070BDC1 +:1012F000EC000020734909680160002070477149C3 +:1013000008600020704701216F4A704B002803D00D +:10131000012805D06E48704791630020187001E0E5 +:10132000D1631970002070476A490120086068483D +:10133000801C70470422684B6649002805D05A601B +:10134000086901221043086108E00869400840006C +:1013500008619A605C490020C031886000207047B5 +:101360005C490622002808D0012809D002280DD0A7 +:1013700003280FD05648401C70470869904302E08C +:1013800008699043801C08610020704708699043F9 +:10139000001DF8E708691043F5E74E494A6A024321 +:1013A0004A62002070474B494A6A82434A620020E1 +:1013B00070474849496A0160002070474549CA6939 +:1013C0000243CA61002070474249CA698243CA6128 +:1013D000002070473F49C96901600020704730B55F +:1013E0000546002072B601463A4A384C4032002D7C +:1013F00011D00123012D0CD0022D02D0072062B69E +:1014000030BDA3706478002C01D09363F7E791633B +:10141000F5E7A170F9E7A170F9E72F49042088608A +:1014200029490020C03188602849012008702B49D3 +:101430000A688023120A12021A430A6028490860C7 +:10144000704722480078704770B5EFF31080C507E9 +:10145000ED0F72B61D4C6078401C0006000E6070E7 +:1014600003D120A1CC2003F068FD6078012806D1CB +:10147000A078002803D01749012040318863002D4F +:1014800000D162B670BD70B5EFF31080C507ED0FE7 +:1014900072B60E4C6078002803D112A1DC2003F054 +:1014A0004CFD6078401E0006000E607006D1A078EA +:1014B000002803D00749002040318863002D00D167 +:1014C00062B670BD0004004040000040FC000020F7 +:1014D00004200000000500400003004000E400E09C +:1014E00000E100E07372635C736F635F706F776538 +:1014F000722E63008107C90E002808DA0007000F6A +:1015000008388008B94A80008018C06904E0800863 +:10151000B74A800080180068C8400006800F7047F6 +:10152000B44948788978884201D3401A02E02122E0 +:10153000511A0818C0B27047AE49233148788978EB +:10154000884201D3401A02E02122511A0818C0B281 +:101550007047A849463148788978884201D3401AB3 +:1015600002E02122511A0818C0B27047A04810B5F5 +:101570000C300168FF22120291430122D203114371 +:1015800001609C49002023314870887023394870DD +:101590008870463148708870974802F0FFFA964884 +:1015A000401C02F0FBFAF2F7C7F900F015F910BD84 +:1015B00020207047B4E770B50C4605460026FFF7BB +:1015C000AFFF8C49A04214D30A46203A002320469C +:1015D000641EE4B200280BD08878105C28708878EC +:1015E0006D1C401CC0B288702128F0D18B70EEE7D2 +:1015F000012600F0F1F8304670BD202070479BE7CF +:1016000070B50C4605460026FFF796FF7949233151 +:10161000A04214D30A46203A00232046641EE4B2B6 +:1016200000280BD08878105C287088786D1C401CCE +:10163000C0B288702128F0D18B70EEE7012600F04F +:10164000CBF8304670BD202101700020704710B5E6 +:101650000446FFF77EFF2070002010BD70B50C46D9 +:101660000546FFF776FF63494631A04215D30A4687 +:10167000203A00232046641EE4B200280BD088786C +:10168000105C287088786D1C401CC0B288702128BE +:10169000F0D18B70EEE7002400E0584C00F09CF88D +:1016A000204670BD70B50C460546212904D9FF209F +:1016B00053A1473003F041FC4C484068103840B219 +:1016C000FFF718FFC6B20D20FFF714FFC0B2864225 +:1016D00007D2FF204AA14D3003F02FFC01E0F2F7C2 +:1016E0006BF921462846FFF766FF0028F7D070BD4A +:1016F000F8B5404E07462336B1787078212200F0C5 +:1017000060F8354623353B4C00280ED0A178607830 +:10171000212200F056F8002814D0A97868782122F8 +:1017200000F04FF800281AD025E032497078C91C23 +:101730000F547078401CC0B2707021281BD100205B +:10174000707018E02B49607820390F546078401C85 +:10175000C0B2607021280ED1002060700BE02549D6 +:10176000687826310F546878401CC0B26870212810 +:1017700001D100206870B1787078212200F021F842 +:1017800000281DD0A1786078212200F01AF80028E6 +:1017900016D0A9786878212200F013F800280FD01D +:1017A000F2F7ECF8144802F001FA012149038842EB +:1017B00003D013A1C12003F0C0FB0F4802F00EFAC2 +:1017C000F8BD401C884205D0904201D1002901D0CB +:1017D000002070470120704710B5074802F0E6F975 +:1017E000002801D1F2F7B9F810BD000000ED00E0CB +:1017F00000E400E04C1B0020FF0000200720000058 +:101800007372635C736F635F72616E642E6300005A +:1018100010B5284802F0C2F9002803D026A11D20E7 +:1018200003F08BFB2348401C02F0B8F9002803D0DA +:1018300021A1212003F081FB10BDF1B5224D6F687D +:1018400001261C4802F0B2F91A4C002803D10026E8 +:10185000601C02F0C3F91D4A1D490120506000BF01 +:1018600000BF00BF00BF00BF00230B604B60009BA8 +:101870006B60106000BF00BF00BF00BF00BF086802 +:10188000002802D148680028F9D048680028E4D12F +:10189000002E04D06F60601C02F088F907E0601C25 +:1018A00002F084F90028D3D1024802F097F9002011 +:1018B000F8BDC2E7010100207372635C736F635F60 +:1018C0006563622E6300000000E5004000E0004018 +:1018D00000E1004030B5EFF31081CC07E40F72B6A1 +:1018E0001D4A116910230D461D431561002C00D1BE +:1018F00062B61A4DC406E40E0120A0402C680442D2 +:101900000DD0C8060AD4EFF31080C007C00F72B61E +:10191000116999431161002800D162B630BD20BF22 +:1019200040BF20BFEAE70E4908784A78401CC0B2A1 +:10193000904200D008707047084A094820BF40BF55 +:1019400020BF4178037843701368002B02D10378DD +:101950008B42F3D00020704700ED00E000E200E091 +:1019600003010020FEB5F64C07466068FF213E01EA +:1019700081552178FF2913D0090108314158324699 +:10198000491E083209020192090A805800F0CEF976 +:10199000002802D02478254615E061682078885513 +:1019A0002770FEBDE6484268019811582801009052 +:1019B0000830105800F0BAF9002806D1E0482C464B +:1019C000416800980D5CFF2DECD1DD482101406895 +:1019D00085554754FEBD70B5D94A04460020157A96 +:1019E00053680AE00201561C9E5DA64203D10C32E8 +:1019F0009A588A4204D0401CC0B28542F2D8FF20D7 +:101A000070BDF8B5CE4F3E7801F01AFE0146FF2EAC +:101A100071D03401254678680835405900F086F9C0 +:101A200002280CD97868405901F0FDFD01F008FE4C +:101A300001467868405900F079F902285BD8C0491E +:101A40004868025D0A70A11C425C002A0CD0521E3C +:101A5000425441590122D20589180902090A41510B +:101A60003046FFF77FFF30E0631CC25C0092221D0E +:101A700094468258002A10D001239B029A420FD923 +:101A80009205920D43595703DB191B021B0A435160 +:101A90006346C3589A1A920A09E0FF21C1540AE02A +:101AA000435952039A181202120A42510022425418 +:101AB0003046FFF757FFA2480C344168C2680098CF +:101AC000095980001258009890479D4C2078FF28B3 +:101AD00011D0000161680830085801F0A4FD01F040 +:101AE000AFFD01462078626800010830105800F010 +:101AF0001DF9022886D3F8BDF8B51C4615460E46DA +:101B00000746FF2B03D38FA1D42003F016FA8C488D +:101B1000FF21C760456004720674017000224270A4 +:101B2000104604E00201521C401CA954C0B2A0425D +:101B3000F8D3F8BD70B5824C06466578207C8542A6 +:101B400003D380A1E72003F0F8F9E068A90046502C +:101B50006078401C6070284670BDFFB581B01D469E +:101B6000FF2401F06DFD764F064679780198814299 +:101B700003D874A1F52003F0E0F971480021037A3D +:101B8000406810E00A019446521C825CFF2A25D06E +:101B9000019FBA4205D162460C328758029A974299 +:101BA0001ED0491CC9B28B42ECD8FF2C18D02101A1 +:101BB0004A1C019B83540B460C33029AC250039B70 +:101BC0005F4F0022012B0ED00B1DC25001239B0240 +:101BD0009D4216D9AA05920D08D008E00C46E0E710 +:101BE000FF2005B0F0BD0B1DC550EFE71A465303AB +:101BF0009B190E461B0208361B0AAA1A8351920A29 +:101C000009E0002D00D101256B039B191D022D0A4F +:101C10000B460833C550891C42543D463E78204649 +:101C2000FFF7A0FE2878B04214D0000169680830A0 +:101C3000085801F0F8FC01F003FD29786A680901F1 +:101C4000083152580146104600F070F8022801D2BF +:101C5000FFF7D7FE0198C4E770B50C46054601F0C2 +:101C6000EFFC064621462846FFF7B5FEFF2817D0B1 +:101C7000334D04012046696808300858314600F0A9 +:101C800055F80121090340186968A41C095D400B3F +:101C9000002901D089020818002800D1012070BD58 +:101CA000002070BDF3B581B00F460198FFF793FE99 +:101CB000FF282AD0224E3578726829460C4604E067 +:101CC000844205D025462301D45CFF2CF8D11CE0CA +:101CD000FF2C1AD0A5421CD10801105C3070FF28DF +:101CE00015D000010830105801F09DFC01F0A8FC4F +:101CF00001463078726800010830105800F016F87C +:101D0000022806D2FFF77DFE03E00020FEBD01F0B1 +:101D100092FC39460198FFF79FFF22017168FF236B +:101D2000541C0B558A5C2B01CA54FEBD401A00029C +:101D30000121000AC905884200D90020704700002F +:101D4000981B00207372635C736F635F74696D65C9 +:101D5000722E6300F0B500241C4A01211C4B0803BD +:101D6000546018601B4B1C601B4C20601B480469AE +:101D7000E443E406E6170469761C10252C4304614D +:101D8000174C6160174D296000E020BF1F68002FCD +:101D9000FBD0002E03D107691026B7430761906876 +:101DA0008005906801D5104A10436960A160002148 +:101DB00019600121084A09031160F0BD10B50446FD +:101DC000FFF7C8FF2060002010BD000000C50040E4 +:101DD00080E100E000C1004080E200E000ED00E0B2 +:101DE00000C3004000C0004000FCFFFF70B51F4969 +:101DF0000A68002A17D000231D4601244A68521C95 +:101E00004A60092A00D34D600E792246B2400E681E +:101E100016420AD072B60B6893430B6062B64968EB +:101E20000160002070BD052070BD5B1C092BE5D34F +:101E30000FA1362003F081F8F5E701201049800555 +:101E400008607047EFF31081CA07D20F72B6012104 +:101E500081400648036819430160002A00D162B638 +:101E6000EBE7024800210160416070470801002053 +:101E70007372635C736F635F6576742E630000003A +:101E800000E200E00120810708607047012081071F +:101E9000486070471048C068C00700D001207047F4 +:101EA0000D488068C00700D0012070470A4840698B +:101EB000C00700D0012070470748C0697047064935 +:101EC0008A69D20306D589698907890F814201D1C0 +:101ED000012070470020704700040040F8B5FE4C18 +:101EE000207BE17A88421AD00126FC4D0027E07A57 +:101EF000215C14200A4642435019037C052B0FD065 +:101F0000062B1BD0072B28D0437C012B33D0F4A108 +:101F1000F64803F012F8207BE17A8842E7D1F8BD59 +:101F20000674E07A0A2807D0E07A401CE072491C67 +:101F3000C8B2AA5802210CE00020F7E70674E07A44 +:101F40000A2808D0E07A401CE072491CC8B2AA589E +:101F500003219047DFE70020F6E70674E07A0A28BD +:101F600007D0E07A401CE072491CC8B2AA58082188 +:101F7000EFE70020F7E74774E07A0A2807D0E07A15 +:101F8000401CE072491CC8B2AA580721E1E70020B2 +:101F9000F7E770B5D64D06206872D648002444771E +:101FA000047738300473C472D34801F0F7FDD34886 +:101FB0000475EC72D249601E88606C71AC70EC7074 +:101FC0002C716C70CF48022104704470CE480470AC +:101FD000047528300470491EFAD10120F1F76EFD16 +:101FE0000020F1F76BFD0120A871F0F785FDC748CF +:101FF000F0F794FDC64C2070C648F0F78FFD607076 +:10200000F1F700FD70BD10B5F1F727FDC04C207849 +:10201000F0F7A2FD6078F0F79FFDB54C207A00281C +:1020200005D0FFF730FAF0F726FE0020207210BD31 +:1020300070B5AF4CA079002804D0A9A1B64802F031 +:102040007CFF70BDE07A002804D11320A4A14001D8 +:1020500002F073FF0126A6710025E572607A042163 +:10206000142250439D4A80180174A5488168491C78 +:1020700004D0691E81600120F1F720FD0020F1F7F6 +:102080001DFDF1F701FD01F023FEF1F706FEA34867 +:10209000056005600120A249C0030860F0F78EFFCB +:1020A00098480078022804D0032804D1E07800285A +:1020B00001D0A67000E0A570F1F7DBFD70BD03460E +:1020C00086490520142242435218203A127F002AE2 +:1020D00004D0401E0006000EF4D170471422424383 +:1020E00051180A46403AD362012220390A777047D4 +:1020F000012805D0032805D1002903D1002070470D +:102100000029FBD010B47A4C002363707D4A00286C +:1021100090700CD002280AD007291AD20B007B44F9 +:102120001B79DB189F441505070D0F111300D370A1 +:1021300003E01B2000E03A20D0700120607010BC4A +:1021400070475820F8E77720F6E79620F4E7B520A7 +:10215000F2E710BC0020704710B56A484078F1F7EC +:10216000A3FD80B210BD411E1422504310B55B4A3E +:102170008418203C042902D8207F002803D158A1CC +:10218000684802F0DAFE207F012803D054A1664897 +:1021900002F0D3FE0020207710BD70B5554C607F53 +:1021A000217F884201D1012500E00025F1F715FDCE +:1021B000F1F77AFD617F227F914201D1012100E098 +:1021C0000021A942EBD170BDF7B50646481E8446F2 +:1021D0008EB0C0B2142204905043404A851828465D +:1021E0000595007C2D1D07282AD13B4C0027E07A5D +:1021F000227B824221D0235C049A934201D10127A1 +:1022000001E0002F04D00A2811D0421CA25C225405 +:102210000A280ED0401C227BC0B28242EBD1002F94 +:102220000BD0207B002806D0207B401E04E000223B +:10223000ECE70020EFE70A202073059A01201074D4 +:1022400060462B4C04280FD814204143234808181B +:102250002038007F002807D00598007C012807D08F +:102260001098807A012807D01DA1304802F065FE41 +:102270001098807A012871D10598184B007C0228AB +:102280001AD0154C207B0A2874D0207BE17A401CA0 +:10229000884204D1C92012A1800002F04EFE0599A7 +:1022A00001204874217B04986054207B0A2865D063 +:1022B000207B401C20731CE1607A049A0146904206 +:1022C00006D0014614277843C018807C9042F8D18C +:1022D000627A824235D12BE0A41C0020B41C00207D +:1022E0007372635C72656D2E63000000D50500009B +:1022F000381D00206C1C0020441D00208C1C002078 +:10230000181D002012010020C41C0020031A010027 +:1023100010010020DD1E01007F02000000F50040DA +:1023200080E200E0CD020000CE02000017030000B2 +:10233000617A14225143C918897C61720121A1720A +:1023400007E014224243D21814277943927CC9181B +:102350008A74142206215043C01881741098007AA0 +:10236000062819D203007B441B79DB189F4408120E +:10237000100E0C0AE07A00288CD090E7002099E734 +:1023800000210FE0B4210DE073210BE0322109E0C0 +:102390000A2107E0062105E0FF20FE49E23002F0B5 +:1023A000CCFD0021109802910068401A2860109915 +:1023B000097A002912D00221401A0102090A296073 +:1023C00010980268406810180002000A68601098AF +:1023D000807A0228109803D0007B74E00421EBE798 +:1023E000007A002813D00222029810188446109810 +:1023F0004268604608301718E748029A40789042D1 +:1024000002D9E278002A04D03846083005E00422D8 +:10241000EAE7029A801AC0190830627A062A1CD0AC +:10242000627A14235A43DD4BD2185268914214D079 +:10243000DB4B0793617A14225143D84A89184A68C2 +:102440008968921B891B12020902120A090A90422A +:102450003AD89A4238D8994236D83018C01B000270 +:10246000000A286010996044CE4AC9680002000A38 +:102470009446421A01239B0507929A4201D21046C4 +:1024800014E00A1A09929A4201D207980EE0079ABC +:102490006346624503D9591A0818401C06E0099A98 +:1024A000624506D9181A4018401C404200285FDCDB +:1024B00003E0B849BC4802F040FD2868C01900029A +:1024C000000A686000202872686808270830000247 +:1024D000000A68601098407AA8721098007A6872B2 +:1024E00003280ED200280CD0FFF7D4FC002803D01C +:1024F00007E0002011B0F0BD02983A210F1A3220F7 +:102500000290A5480178012901D0032909D1417819 +:102510000298814205D9E078002802D10298081A71 +:10252000C71928689E4A801B844601026868090A08 +:10253000801B03021B0A8F421AD81746914217D8F4 +:10254000BB4215D8617A062916D0677A6146062201 +:10255000039200923A4614235A43904BD218936840 +:102560009B1B8B4216D80397977C062FF2D177E0FE +:10257000049801F059F9BCE7059802220499027405 +:10258000627A062A00D0627A827461720120A07297 +:1025900011B0F0BD062F63D00022394694461422B4 +:1025A0007E4B4A43D21853689B1B834229D2917BAE +:1025B000AB7A99421FD805980521049C7B4D017484 +:1025C000287B0A2811D0287BE97A401C884203D155 +:1025D0007049774802F0B1FC287B2C54287B0A28EC +:1025E00007D0287B401C287383E7E87A0028EFD0C7 +:1025F000F2E70020F7E701218C46917C0629CED135 +:1026000002E0604600282AD03D46009114202A4668 +:10261000424362480621161831741038007B0A289C +:10262000624816D0017BC07A491C814203D161A166 +:10263000634802F082FC5D48017B4554017B0A2916 +:102640000BD0017B491C0173B57C0098A842DDD1F9 +:1026500006E0C07A0028EAD0EDE70021F3E7009712 +:102660000599022008744D4D607AB84207D105994A +:1026700000988874049860720120A07221E0039889 +:10268000062F0FD0062803D14AA14E4802F055FC70 +:1026900003981422504340190499817405990098B5 +:1026A00088740EE0062803D142A1474802F045FC99 +:1026B0000398142250434019049981740599062007 +:1026C0008874012011B0F0BD70B50D4606463F4933 +:1026D00000242046891BA04103D236A13C4802F0C9 +:1026E0002CFC3C490020491BA04103D231A13A48AF +:1026F00002F023FC394A70190021821A8C4101D35F +:102700003749401870BDF8B5401EC0B21421484387 +:1027100022494518687B062813D203007B441B79A5 +:10272000DB189F44020C0A080604002066E0B4206F +:1027300010E073200EE032200CE00A200AE00620B0 +:1027400008E0FF201BA1E23002F0F7FB697B0020CC +:10275000002953D0022140186968002440180C2138 +:1027600000026956000A00294ADBF1F79DFA174A70 +:1027700006460C27EF570021101AA14103D20DA1E4 +:10278000134802F0DAFB13490020C91BA0412CD2E8 +:1027900008A127E0E022010012010020B41C002063 +:1027A000FFFF3F00FFFFFF0014070000A41C0020F4 +:1027B000090200007372635C72656D2E6300000095 +:1027C000C7030000DF030000E5030000FF7F841E55 +:1027D000F50300000020A107F60300000080841E1E +:1027E00000807BE1FB4802F0A8FBFB4AF0190021C6 +:1027F000821A8C4101D3F9494018F8BD0421AAE797 +:10280000F1F752FA0C21695600224018F449091ACE +:10281000A241F2D24042F8BDF0B5064683B0F1487D +:102820000190457A029534687068001B0702EE48F3 +:102830003F0A001B0090062D2DD01420294641434D +:10284000EA480122081884464168E748920586460E +:10285000081B904210D3631A93420DD30246704670 +:10286000724503D900984018401C05E073450ED905 +:10287000411A0819401C404200280CDA60460295B3 +:10288000857C0198C0790028D5D003B0F0BDD84927 +:10289000D84802F052FB0298854226D014214843C2 +:1028A000D2490123401802908068CF499B058C468D +:1028B000011B8646994210D3221A9A420DD36346D1 +:1028C000614503D900997144491C06E019466245E7 +:1028D0002DD9091A0819401C4142002905DD02982A +:1028E000B17A807B814200D37446062D15D0BF4952 +:1028F0001420454368184268121B1202120ABA4299 +:102900000BD2B27A837B9A4200D38468857C01988B +:10291000C0790028B9D1062DEAD13068A042B4D0E0 +:10292000E0190002000A3460706003B0F0BDB049E5 +:10293000B04802F002FBD8E7F0B5AF49044648685A +:1029400085B0C005C00D1CD0103840B200280CDA8C +:102950000207120F083A920892005118C9698007BD +:10296000C00EC1400806800F09E08108A34A890013 +:10297000891809688007C00EC1400806800F00282A +:1029800008D000262078002806D0012804D0002096 +:1029900005B0F0BD0126F5E72079062813D2030023 +:1029A0007B441B79DB189F44020C0A0806040020B4 +:1029B00018E0B42010E073200EE032200CE00A2072 +:1029C0000AE0062008E0FF208949E23002F0B5FA6B +:1029D00021790020002905D002214718814D002EC1 +:1029E00002D003E00421F8E70020E87102AA69465A +:1029F000A068F1F763F9694608228A56E06801A9E0 +:102A00008018C01C01221F2801DA019209E003AAE4 +:102A1000F1F754F96846007B002802D00198401C69 +:102A2000019000990198401808300002000A0190B6 +:102A3000C81B0002000A00906079694688720098FD +:102A40000390F1F7CAF8009A019B121A181A6C4900 +:102A500012020002120A000A8A4216D8884214D8CA +:102A60006846FFF7D9FE00990398814205D0C8193E +:102A70000002000AF1F718F9A0600120E9790029A5 +:102A800086D0002EB0D005B0F0BD0020F6E7F3B53B +:102A90008FB05C480C460B9001F088F85A4A0F99A9 +:102AA000504E5518203D594F00280BD05848007DF6 +:102AB000002803D057A15A4802F03FFA2078012895 +:102AC0007DD05FE1787F0A280CD0787F397F401C69 +:102AD000884203D14FA1534802F02FFA20780128F1 +:102AE00004D00CE0387F0028F4D0F7E7E87F002816 +:102AF00003D048A14C4802F020FA0120E877787F03 +:102B00000F991422494D504340190174207802282E +:102B100023D0787F142148434519207928726079A1 +:102B200068722A460C322946A068F1F7C7F80C20D3 +:102B300028560F2804DD1F3828732868401C286099 +:102B40000C22AA56281DE16802908818C01C1F2874 +:102B50003FDA029901200860FDE027494868C00576 +:102B6000C00D20D0103840B200280CDA0207120F36 +:102B7000083A920892005118C9698007C00EC140F6 +:102B80000806800F09E081081C4A89008918096835 +:102B90008007C00EC1400806800F002803D11DA188 +:102BA000234802F0CAF9787F1421484345190021CF +:102BB000E0686A460591117303AA05A900E0D8E010 +:102BC000F1F77CF86A460C2010560F2832DD012000 +:102BD00031E0B3E0F60300000080841E00807BE15A +:102BE000FF7F841E381D0020FFFFFF00B41C002063 +:102BF000B42701001407000000ED00E000E400E04D +:102C0000FFFF3F00441D0020160100206C1C002027 +:102C10008C1C00207372635C72656D2E6300000073 +:102C200017050000F5040000FA040000AC1B0020AA +:102C30000605000000200599401808900220A8729F +:102C40002079287260796872A068291DC01C0391E0 +:102C50001F2801DA01200AE006AAF1F72FF86846DA +:102C6000007E002804D0039803990068401C086087 +:102C7000287A062813D203007B441B79DB189F4473 +:102C8000020C0A08060400200FE0B4200DE07320B7 +:102C90000BE0322009E00A2007E0062005E0FF20D3 +:102CA000FD49E23002F049F900202179002943D0A2 +:102CB000022141180691686808314018089905906A +:102CC00008180699401A0C900020F071F0F785FF63 +:102CD00004462860089820180002000AE860707A0C +:102CE000062825D0707A14214843EC4940184068E2 +:102CF0000090059940180002000A0190687A694620 +:102D000088726846FFF788FD0098019A001B121B25 +:102D100000021202E24B000A120A0C99984207D8EC +:102D20008A4205D80099069808180002000A28600F +:102D3000F0790028C8D110E00421BAE704AA02996A +:102D4000F0F7BCFF6846007C002804D00298029986 +:102D50000068401C08602078A872787F0A2806D096 +:102D6000787F401C78770B9800F038FF47E0002010 +:102D7000F8E7E87F002803D0CAA1CD4802F0DDF8CB +:102D80000120E877CB490F9808742078022803D1F6 +:102D9000C4A1C94802F0D1F8C64D207928726079E3 +:102DA00068722A460C322946A068F0F787FF0C208B +:102DB00028560F2804DD1F3828732868401C286017 +:102DC0000C22AA56281DE16802908818C01C1F28F2 +:102DD00003DA0299012008600CE003AA0299F0F7D7 +:102DE0006DFF6846007B002804D0029802990068B5 +:102DF000401C08602078A872AE4901200875797FD0 +:102E0000387F814223D0747A062C22D0F0F7E5FE79 +:102E100014214C43A1496218117C042917D00329BD +:102E200015D0536892681B1A101A1B0200029C49A5 +:102E30001B0A000A082B0AD30A468B4207D8904285 +:102E400005D8787F397F884201D0F0F712FF11B0A2 +:102E5000F0BD787F397F8842F7D111B0F0BD10B551 +:102E60000020F0F718FE10BD10B50120F0F713FE9A +:102E700010BDF1B5009802281FD0904C607A06284A +:102E800003D188A18E4802F058F80026A6710125CA +:102E9000E572607A03211422804F5043C0190174F7 +:102EA000F0F7ECFE009800280CD001282AD0032867 +:102EB0007CD0B5207BA1C00044E082480078EFF7C9 +:102EC00051FEF8BD8048007F002803D075A17F48DF +:102ED00002F033F865717C4D00202E60F0F7EEFDB6 +:102EE000A968481C04D0012300221846F0F71CFEF4 +:102EF000607A617A401CC0B2142251437A58012191 +:102F00009047F8BD0120F0F7D9FD607900280DD079 +:102F10006D488068401C09D0607A617A401CC0B25C +:102F2000142251437A5806219047F8BD6648007F25 +:102F300001280AD0022812D0032824D0042836D031 +:102F400058A1634801F0F9FFF8BD2079002803D0AB +:102F50002671F0F798FEE5705B480677F8BD207A99 +:102F6000002804D1FEF770FAEFF75CFE2572607A54 +:102F7000617A401CC0B2142251437A580021904714 +:102F800051480677F8BD504F0123397B78680022FD +:102F9000411A1846F0F7C8FD2079002803D02671A1 +:102FA000F0F771FEE57002203877F8BD1BE0464E61 +:102FB000217870680123411A00221846F0F7B4FD09 +:102FC000207A002804D1FEF73FFAEFF72BFE257296 +:102FD000607A617A401CC0B2142251437A580021B1 +:102FE00090473577F8BD607A617A401CC0B21422F0 +:102FF00051437A5805219047F8BD10B52F4C607A9F +:10300000062803D127A1334801F097FF607A617A3F +:10301000401CC0B214225143204A52580421904708 +:1030200010BDF0B583B006200290F0F7D6FD234C1A +:103030000090617A28480190062920D0617A1420F6 +:10304000414316480918097C042918D0617A1422D2 +:1030500051430818007C03287BD00198009A03682C +:1030600040689B1A801A1B0200020D491B0A000AC5 +:10307000082B6ED30A468B426BD8904269D812480F +:103080008068401C03D007A1144801F056FF0020BF +:103090006071607A062823E0142C0100B41C002023 +:1030A000FFFF3F007372635C72656D2E630000006A +:1030B0001E0500008C1C002024050000381D002087 +:1030C0005505000010010020181D002061050000BA +:1030D0009C050000AF050000281D0020EB05000046 +:1030E00007D16078002804D0FE48C178417081780B +:1030F0000170607A062815D0607A1421FA4A484394 +:103100008018007C04280DD1607A0290617A012039 +:103110001423594389180874617A59438918897CA2 +:103120006172A072F14D687F297FF14F884233D0E0 +:10313000F04E287F142148438019007CC05D01288F +:10314000287F07D048438019007CC05D02282FD01B +:1031500044E001E2142148438019807A01280AD012 +:10316000287F0221142250438019007CC155287FFA +:103170000A2808D009E0297F002014225143891928 +:10318000097CC8552AE0002001E0287F401C2877F0 +:10319000687F297F8842CCD1D74D287D00284CD02C +:1031A000287CC15D012928D0C05D022830D03AE0DA +:1031B000287F142148438019807A012803D0CFA1A9 +:1031C000D14801F0BAFE297F002014225143891909 +:1031D0008872297F51438919097CC855287F142199 +:1031E00048438219287F48438019017C0098FEF7E4 +:1031F000EBFF287F0A28C8D1C5E7A97A012904D0A6 +:103200000221C155002028750DE00021C1550AE0BA +:10321000A87A012803D0B9A1BC4801F08EFE002095 +:10322000A872297CC855287D002806D0297CB24A7E +:103230000098FEF7C9FF00202875029806281ED0C6 +:1032400014214843A8494018017C012917D10721BE +:10325000AF4D0174287B0A283CD0287BE97A401CBA +:10326000884203D1A5A1AB4801F067FE297B0298F3 +:103270006854287B0A2831D0287B401C2873607A48 +:1032800006287DD0A07A00287BD00020A072617A29 +:10329000142041439448A04B0A18566891681D4673 +:1032A000D2687C35DE67AA6069609C4D697E002922 +:1032B00016D00226617A14228B4851430818407BAD +:1032C00006281BD203007B441B79DB189F440A1499 +:1032D00012100E0CE87A0028C4D0C7E70020CDE712 +:1032E0000426E7E700200FE0B4200DE073200BE098 +:1032F000322009E00A2007E0062005E0FF207FA138 +:10330000E23001F01AFE00202873697E022901D004 +:10331000012910D12969009A09188A1A1202120A81 +:103320003A2A08D90320687632390802000A28614F +:10333000322028730AE0322808D2207A00280ED1E1 +:10334000FEF782F8EFF76EFC012007E0207A0028F4 +:1033500005D0FEF798F8EFF78EFC00202072614947 +:103360000822487820700978012901D0032906D164 +:1033700001212171297B884201D9421A083201E0DA +:1033800091E0A1E0A378002B00D0921C21790029C4 +:1033900001D1002B5DD09446614A00990092019AB8 +:1033A000176852687F1A511A3F0209023F0A090A38 +:1033B000BC451BD85A4A974218D8009A914215D852 +:1033C000297B884223D92B69421A9A1A1202120ABF +:1033D000101880190002000A2A616860002914D0C0 +:1033E000032028770006000E3ED14CE0002020711B +:1033F000A070297B002925D0286940188019000277 +:10340000000A6860022028772EE00120E9E7814267 +:103410000BD92A69511889190902090A696000281B +:1034200001D00420DDE70220DBE7002B03D133A12C +:103430003C4801F082FD286980190002000A68609A +:10344000002004E0296989190902090A69602877BE +:1034500019E0287B00280FD029690818801900027C +:10346000000A686002202877286901238119002258 +:103470001846F0F759FB09E0286980190002000A94 +:103480006860002028770120F0F718FB607A14218B +:10349000484315490C2240188256012300206968D0 +:1034A000F0F742FB10E00120F0F708FB0020F0F7F6 +:1034B00005FBF0F7E9FA207A002805D0FDF7E3FFD5 +:1034C000EFF7D9FB00202072A078002804D0F0F795 +:1034D000DAFB0020E070A0706078002827D0014857 +:1034E000C17821E012010020B41C00206C1C0020D7 +:1034F00015010020AC1B00208C1C00207372635C43 +:1035000072656D2E630000000D06000029060000A4 +:10351000A41C00203B060000AC1C0020181D00204D +:10352000FFFF3F008D060000417081780170207917 +:10353000002806D00020CE49E0700978002900D18B +:103540002071CC48017BC07A814203D0CA484078C0 +:10355000EFF708FB0120E07103B0F0BDF0B5C74CF8 +:103560000746607A83B0062804D16F20C4A1000109 +:1035700001F0E3FC607A1421C44E48438019007CBA +:10358000032803D0BEA1C24801F0D7FCC14DA868F2 +:10359000401C03D0BAA1C04801F0CFFC607A1421CE +:1035A000484381190C20085600216A460091117188 +:1035B000C01901AA6946F0F781FB6A46042010563B +:1035C0000F2801DD012000E0002000994018696803 +:1035D00040180102090AA9606079002804D001237B +:1035E00000221846F0F7A0FA03B0F0BD70B5AC4C5D +:1035F000AA4A0B1AA34214D3451AA54211D39342E7 +:1036000003D9101A43185B1C0BE0954204D9511AD8 +:103610000818401C434204E099A1A24801F08DFC27 +:103620000023184670BD10B5014601230022022078 +:10363000F0F77AFA10BD10B50220F0F73FFA10BD8E +:1036400010B5F0F7CAFA10BDF0B58C4D0446E87A13 +:1036500083B0002803D18AA1934801F06EFC642C4A +:103660004DD3924A00210846121B884147D3904807 +:10367000417F007F814242D18E48007D00283ED1AB +:10368000687A1421814F4843824EC519306801AAD7 +:1036900000196946F0F712FB694604200856002815 +:1036A00002DD0098401C0090A96800986B680A1819 +:1036B000D21A1202804B120A9A4220D8AA7C062AF9 +:1036C00008D014235A43D2195268511A0902090A20 +:1036D000814214D3B068401C05D00120F0F7EEF908 +:1036E0000020C043B060306800193060A8680099BD +:1036F00040180002000A7061012003B0F0BD0020F4 +:1037000003B0F0BDF8B50646401EC4B214205F49B0 +:1037100060434518287C002804D1772058A1000177 +:1037200001F00BFC6248017F407F81420CD0634A6C +:1037300014234B439B181B7CB3420CD00A290CD09A +:10374000491CC9B28142F3D15A48017D002961D098 +:10375000007CB0425ED10020F8BD0021F1E70529D0 +:1037600003D0062901D0072928D101212974C17A63 +:103770000023027B8A4221D00246565CA64201D138 +:10378000012301E0002B04D00A2911D04E1C965DC4 +:1037900056540A290ED0491C167BC9B28E42ECD170 +:1037A000002B0BD0117B002906D0117B491E04E0B1 +:1037B0000026ECE70021EFE70A211173697C00295C +:1037C0002AD06F74C17A0023027B8A4224D0425CE3 +:1037D000A24201D1012301E0002B04D00A2912D01A +:1037E0004A1C825C42540A290FD0491C027BC9B290 +:1037F0008A42ECD1002B0FD0027B0146002A06D072 +:103800000A7B521E04E00022EBE70021EEE70A22C9 +:103810000A7301E017480027297C01299FD16A7C9F +:10382000002A9CD10120F8BD70B505461420174A26 +:103830000521684380180F4C0174207B0A2811D0A1 +:10384000207BE17A401C884203D10DA11C4801F085 +:1038500074FB207B2554207B0A2807D0207B401C4A +:10386000207370BDE07A0028EFD0F2E70020F7E780 +:1038700012010020A41C002010010020381D00208F +:103880007372635C72656D2E63000000B41C0020CF +:10389000F1060000181D0020F2060000FF7F841EC4 +:1038A0000020A1071407000033070000FF1FA10735 +:1038B0006C1C00208C1C0020FFFF3F00AC1B002074 +:1038C0000902000010B501462022094801F099F9CB +:1038D00007490020C877084610BD06490120486105 +:1038E0000548064A0168914201D1002101607047F4 +:1038F000481D0020000500401C010020BEBAFECA81 +:10390000064A10705170704704481C2201784171BA +:103910004270017070477047704770472001002067 +:1039200030B50346002002460DE09C5C2546303D44 +:103930000A2D02D30020C04330BD0A256843303829 +:103940002018521CD2B28A42EFD330BD70B50D465A +:10395000144608E00A2101F0CEF92A193031203A44 +:10396000641ED177E4B2002CF4D170BD10B50023F1 +:1039700010E0040A00020443A0B2CC5C44402006DC +:10398000000F60400407240C44402006C00C604037 +:103990005B1C9BB29342ECD310BD10B520380C4693 +:1039A000030001F0BBFB33E0DBE41B1F23272C31BA +:1039B000373C41474D5054585C606D71656974786F +:1039C0007C8084888C9094989C9FA2A6AAAEB2B862 +:1039D000BCC0C5CACFE9F0F3D3D7F800206800F027 +:1039E000DDF8D6E0206800F0E1F8D2E0206800F0D1 +:1039F000F5F8CEE0207840B200F092FAC9E02078E5 +:103A000040B200F0B0FAC4E02078616840B200F043 +:103A1000C3FABEE0207840B200F0D3FAB9E02078D3 +:103A200040B200F0DEFAB4E02078217940B200F034 +:103A3000E9FAAEE02078616840B200F013FBA8E03C +:103A400000F01FFBA5E0206800F023FBA1E0207838 +:103A500000F038FB9DE02068FDF7F5FD99E0206857 +:103A6000FDF7F5FD95E021792068FDF7F7FD90E081 +:103A70002068FDF73FFC8CE02068FDF740FC88E003 +:103A80002078FDF740FC84E0FDF74EFC81E02078D3 +:103A9000FDF750FC7DE02078FDF762FC79E02068BE +:103AA000FDF77BFC75E02068FDF77DFC71E0206888 +:103AB000FDF77FFC6DE02068FDF780FC69E0206881 +:103AC000FDF782FC65E02068FDF784FC61E020687A +:103AD000FDF785FC5DE00846EDF738FB59E0EFF7B0 +:103AE000B4F856E0EFF7E1F853E02068EFF7E9F8B3 +:103AF0004FE0206800F080F84BE0206800F082F88A +:103B000047E0206800F083F843E02078A26861680D +:103B100000F082F83DE0207800F089F839E0207864 +:103B200000F091F835E02078616800F098F830E016 +:103B30002078616800F09FF82BE02179207800F070 +:103B4000D5FB26E02068FDF778FE22E02068FEF72E +:103B50004DF91EE02068FEF731F91AE0204607C84B +:103B600000F0B9FC15E0206800F00CFD11E0616880 +:103B7000206800F037FD0CE0206800F029FF08E025 +:103B800009E003E0FFE700F03BFF02E0206800F0FF +:103B900073FF206010BD0120086010BD002101707E +:103BA000084670470146002008707047EFF3108107 +:103BB000C907C90F72B60278012A01D0012200E0BC +:103BC000002201230370002900D162B6002A01D02F +:103BD00000207047012040037047E7E7EFF31081B2 +:103BE000C907C90F72B600220270002900D162B65F +:103BF00000207047F2E7000038490968C9B2016047 +:103C0000002070473549C0B24860002070473349F2 +:103C1000C0B2886000207047082801D33048704740 +:103C2000C3002E4818180161426100207047022825 +:103C300002D32B48401C70472A4A0121C00080183B +:103C4000016000207047022802D32548401C7047BD +:103C5000244A0121C00080184160002070470228DA +:103C600002D31F48401C70471F4A8000C9B2801809 +:103C7000016000207047022802D31948401C704799 +:103C8000194A800080180068C0B2086000207047A0 +:103C900010B5FF20114AC043906008200021C300E6 +:103CA0009B1819615961401C1028F8D300200E4A56 +:103CB00005E0022803D383009B18196004E0830009 +:103CC0009B181C68E4B21C60401C0428F1D310BD92 +:103CD000FF200249C04388607047000000F50140A2 +:103CE0000820000000F0014000F8014010B572B655 +:103CF00000F0DEF800280BD0EDF7D2FAFEF783F9DA +:103D000000F0BBFA6F490020C86288626E49086003 +:103D100062B6002010BDF3B5002501200007C06A7F +:103D200081B0C0430006000E04D168480068401C02 +:103D300000D1012572B600F0BBF8002801D062B6B0 +:103D400087E0EDF719FAEDF7AFFA614C614A00210F +:103D50002368CB40DB071FD00346CB40DB0718D1DD +:103D60004BB2002B07DA1E07360F083EB608B60026 +:103D7000B618F66904E09E08574FB600F619366883 +:103D80009B07DB0EDE4033069B0F012B04D0032B79 +:103D900002D062B65148FEBD491C2029D8D3019CEF +:103DA00001204F49230001F0B9F9142224242424CE +:103DB000242424240B0D1012142016181A1C1E2F54 +:103DC000002400E00124C86314E00224FBE703247C +:103DD000F9E70424F7E70824F5E70924F3E70A24C0 +:103DE000F1E70B24EFE70C24EDE70524EBE70724CC +:103DF00000E00624D06901210002000AC907084337 +:103E0000D061002D04D009E062B601200003FEBDA0 +:103E10002C4D3448E862EDF747FAA8622A49324847 +:103E20000860324902980860EDF73EFA214600F03A +:103E30000BFAFEF7AEF800F00DFC00F087FA0198DF +:103E4000EDF7FCF9040062B603D0FFF74FFF204600 +:103E5000FEBD0020FEBD10B5044600F029F8002884 +:103E600000D001202070002010BD214908600020F2 +:103E7000704710B50C46102808D011280BD0122816 +:103E80000CD013280ED00120086010BD6168206896 +:103E9000FFF741FF0AE0FFF729FF07E02068FFF77F +:103EA000DAFF03E01249206808600020206010BD9E +:103EB00005480D490068884201D101207047002063 +:103EC00070470000000500401C0100200010001099 +:103ED00000E100E000ED00E000E400E0011000007F +:103EE0004000004000200000BEBAFECA28010020A9 +:103EF000040000208107C90E002808DA0007000F1F +:103F000008388008814A80008018C06904E0800871 +:103F10007F4A800080180068C8400006800F704704 +:103F200010B5044600F0DBF8002813D02046FFF758 +:103F3000E1FFC0B200F0E1F800280DD07549E206BB +:103F40000B78D20E01209040002B08D04A68104315 +:103F5000486006E0704810BD6F48401C10BD6F49B6 +:103F60000860002010BD10B5044600F0B8F8002825 +:103F70000BD06849E2060B78D20E01209040002B4E +:103F800005D04A6882434A6004E0634810BD634933 +:103F900080310860002010BD70B50D46044600F069 +:103FA0009EF800280BD05E480068E206D20E012180 +:103FB0009140084000D001202860002070BD564884 +:103FC00070BD10B5044600F08AF8002807D0E1065D +:103FD000C90E0120884052490860002010BD4E489B +:103FE00010BD10B5044600F07AF8002808D0E106AC +:103FF000C90E012088404A4980310860002010BD68 +:10400000454810BD70B50D46044600F068F800281C +:1040100019D0284600F071F8002816D0A007C20E6B +:10402000FF209040A907090E9140002C10DA2207CA +:10403000120F083A9308354A9B009B18DA698243AD +:104040000A43DA610CE0344870BD3348401C70BD4F +:10405000A3082F4A9B009B181A6882430A431A60E0 +:10406000002070BD70B50C46054600F038F80028F9 +:1040700005D02846FFF73EFF2070002070BD26487F +:1040800070BDBFF34F8F21492648C860BFF34F8FE3 +:10409000FEE770B51F4C05462178012000290ED19E +:1040A000207072B600F0F8F81C4E803631688143FB +:1040B000616000F0F1F8C043306062B60020287003 +:1040C000002070BD13490A78002A06D0002804D1C8 +:1040D000124A48681060002008700020704710B530 +:1040E0000446202805DA00F0D7F80121A140084253 +:1040F00001D0002010BD012010BD012803D00328ED +:1041000001D00020704701207047000000ED00E062 +:1041100000E400E02C0100200120000000E100E0AC +:1041200000E200E00400FA05F8B504468007002527 +:104130000126002804DA5A48C563C6630220844376 +:10414000E00404D55748C563C66380148443600007 +:1041500003D55548456080058443E00504D55348A0 +:10416000C563C66380158443A00404D55048C56365 +:10417000C6634014844360042704C00FF90F8842CB +:1041800003D04CA1612000F0D8FEB80F0AD04E49F0 +:10419000CD634E48C563C563CE63C663C663032063 +:1041A0008003844320050AD5494FFD632F20ECF797 +:1041B000FBFFFE632F20ECF7F7FFF8148443002C7D +:1041C00003DAFFF765FD640064084248044203D047 +:1041D00038A1902000F0B1FEF8BDF0B500210A46EC +:1041E000FF230446CC40E4072AD04CB2E606F60E84 +:1041F0000125B540384E3560384E3560002C11DA57 +:1042000025072D0F083DAE08354DB6007619F56926 +:10421000A407E70E1C46BC40A5431446BC402543FA +:10422000F5610DE0A6082F4DB60076193568A40794 +:10423000E70E1C46BC40A5431446BC4025433560F0 +:10424000491C2029CDD3F0BD70B5274C0D46206008 +:10425000FFF76AFF2068FFF7C0FF2846EEF7BEFDB4 +:10426000FDF7D6FAFDF782F9FFF712FDFDF7D5F855 +:10427000EEF742FC00F06AF870BD10B51A4C2068E9 +:10428000FFF752FF2068FFF7A8FFFFF701FDEEF7E9 +:104290002AFE0020206010BD13480068704700000F +:1042A000C01F0040C0CF004000E50140C08F00406B +:1042B000C0DF00407372635C736F635F636F6E6631 +:1042C00069672E6300000000C0EF0040C0FF00409F +:1042D000C0BF0040FEFF0FFC80E100E080E200E094 +:1042E00000ED00E000E400E03401002070B500249F +:1042F00002460D4620462146002A1ED0012A04D03F +:10430000022A04D0032A1ED103E0012002E0022089 +:1043100013E003202B0000F001FF07160507090B2F +:104320000D0F1600012108E0022106E0032104E040 +:10433000042102E0052100E00621FDF7D9FE002856 +:1043400001D0204670BD0724FBE70000B1480021E2 +:1043500001708170704770B5AF4D01236B60AF4B3A +:104360001C68002CFCD0002407E00E6806601E6864 +:10437000002EFCD0001D091D641C9442F5D30020C2 +:10438000686018680028FCD070BD70B5A14C0D465F +:104390006178884203D0A2A16C2000F0CEFD2B00F2 +:1043A00000F0BCFE094F0625254F4F4F4F464F00EA +:1043B0002078022803D09AA1702000F0BEFD0320CF +:1043C0002070A078022802D0012804D008E0A0685C +:1043D00000F0CEFB04E02269E168A068FFF7BBFFB4 +:1043E0000020A070FDF724FE0420207070BDFDF7B2 +:1043F000D4FE01466068FFF7F9F8054620780228E8 +:1044000003D087A1842000F098FD894A89498A4811 +:10441000954206D8401BC86086496078FEF737FB96 +:1044200070BD854202D802224A71F3E7032003E0FF +:10443000A0780028FAD10220FDF704FD00F0E0F892 +:1044400070BD77A1AD2000F078FD70BD70B5054658 +:10445000FDF7A3FE6F4C60602078012803D070A1A7 +:10446000B42000F06AFD73490220087000220A712E +:104470008D6003224A71704ACA6020706078FEF72E +:1044800006FB70BD10B5634CA078002802D12078DF +:10449000002801D0112010BD6848FDF710FE6070A3 +:1044A0006078002803D001202070002010BD032078 +:1044B00010BD10B50124020B64040121604BA04221 +:1044C00002D29140186802E0203A586891400840B2 +:1044D00000D0012010BDF8B50E46910005464F19D9 +:1044E00014463F1F009100F054FB00998002891987 +:1044F000091FB14201D2012200E00022002C03D0AA +:10450000FF2101318C4201D90920F8BD4D498D426E +:1045100019D3AF4217D3854205D2874203D228462A +:104520003043800701D01020F8BD8E420BD3002A03 +:1045300009D12846FFF7BDFF002804D13846FFF710 +:10454000B8FF002801D00F20F8BD3F483F49006860 +:10455000884205D0224631462846FFF7FCFE0FE090 +:10456000FFF790FF0028EFD12A480121C66085603F +:10457000046181702046312148431430FFF766FF03 +:104580000020F8BD10B504462E48800A84420BD3A3 +:1045900000F0FFFAA04201D8102010BDA00204468E +:1045A000FFF787FF002801D00F2010BD26482749BC +:1045B0000068884203D0204600F0DAFA0AE0FFF7EC +:1045C00061FF0028F1D113480221846081702048E6 +:1045D000FFF73CFF002010BD1A48010B0120884066 +:1045E000401E704700B50B460246FFF7F5FF10422C +:1045F00001D00F2000BD124802604360002000BDC2 +:1046000010B5044C6078FDF7AEFD00202070A0705E +:1046100010BD00003801002000E5014000E4014029 +:104620007372635C736F635F666C6173682E6300A3 +:1046300030750000681D0020D0FB01008B43010095 +:1046400000060040006001001C010020BEBAFECA46 +:1046500010540000F748052181700021017041705D +:10466000C1708160704710B5F3490A78022A07D0FB +:10467000CA681018C860C8689638FEF76FFF10BD8A +:104680008A68101888608868F6E70378EB49EC4A76 +:10469000002B02D0012B10D014E00379002B01D0A5 +:1046A000012B0FD14379002B01D0012B0AD1836854 +:1046B000643B8B4206D2C06810E00379002B03D024 +:1046C000012B01D0002070474379002B01D0012B32 +:1046D000F8D1C368643B8B42F4D280689042F1D831 +:1046E00001207047F8B504460226FEF7BDFB0068BE +:1046F000002803D0D3A1BE2000F01FFC0127CD4D20 +:10470000002C08D02078002817D0012805D00228D6 +:1047100011D0032813D02F710DE06068C82808D38A +:10472000FEF792FF002804D06068FFF79CFF012687 +:1047300003E0002601E000F0F9F93046F8BD2878E2 +:104740000028F8D16068FFF7A0FF0028E3D0606878 +:104750000078002826D0A878042803D0B9A1F82032 +:1047600000F0EBFBB44F002038706068007901283E +:1047700000D00020387160684079002837D00320CD +:10478000787160688168E868FDF79EFFB8606068CE +:10479000C0689630F8600320A870A749E878FEF753 +:1047A00076F9C8E7A44802210170616809790129F6 +:1047B00019D00021017161684979002915D00321C0 +:1047C000417161688968963181606168C968C160BA +:1047D000C068984C14346060FDF7DFFC20606F7097 +:1047E0000220A870A7E70321E4E70221E8E70220FE +:1047F000C6E7F8B58F4C0D46E178884204D0FF201B +:1048000090A11A3000F099FB28468A4F0025012616 +:104810001437030000F082FC090612375A7C8D978A +:10482000C4A0C400A078032807D0A078022804D030 +:10483000FF2084A11E3000F080FBF8BDA078032883 +:1048400007D0A078022804D0FF207EA1223000F0FB +:1048500074FB0420A07025712078002810D1FFF788 +:1048600002FFE078FDF74FFFE0607D49886A7D4AEE +:10487000024022617B4AD24310408862002050E00F +:1048800000F054F9F8BDA078032807D0A0780228DA +:1048900004D0FF206BA1453000F04FFB20780028AA +:1048A00002D000F04FF9F8BDA07803281FD10420F2 +:1048B0002AE0091A6048C1600146E078FEF7E7F88F +:1048C000F8BD0420FDF7BEFAA570F8BDA078032856 +:1048D00007D0A078022804D0FF205AA1663000F04B +:1048E0002CFB20780028DCD1A07803280BD0FDF722 +:1048F00054FC01463868FEF779FE0028E1DB796850 +:104900008142DEDBD5E70520FDF79CFAA670F8BDF5 +:10491000A078042804D0FF204AA1873000F00DFBC6 +:104920000220A1688847FFF7DDFEFF260546C03656 +:1049300042E0A078042804D0FF2042A18C3000F08F +:10494000FCFA0120EDE7A078042899D0FF203DA1D2 +:10495000913000F0F2FA93E7A07804280AD060784A +:10496000002802D0A078022804D0FF2035A196307C +:1049700000F0E3FA2078002893D12079002804D0B1 +:104980000620FDF75FFA2571C0E76078002805D0A2 +:104990002949E078FEF77BF86570F8BD0720B3E79A +:1049A000FF2028A1B13046E7002D0AD0012D06D006 +:1049B00024A1304600F0C1FA022DF5D1F8BD042043 +:1049C00000E00320A1688847FFF78CFE0546F3E767 +:1049D00070B5050005D0174CA078052803D011202C +:1049E00070BD102070BD2048FDF769FBE070E078D5 +:1049F000002803D0A5600020A07070BD032070BD0A +:104A000010B50C480178002901D0112010BD817823 +:104A100005292BD0817801292AD08178002927D037 +:104A2000012101708178012922D0807800281FD0CF +:104A300020E000004C010020781D00203D86010090 +:104A4000FF1FA1077372635C736F635F72616469B8 +:104A50006F5F74696D65736C6F742E630000000086 +:104A60000005004002810080F34701000F2010BDC7 +:104A700000F068F8002010BDF8B5394E0446B07853 +:104A8000002801D001280DD1002C0DD02046FFF7C1 +:104A9000FCFD00280AD02078324D002808D0B078DC +:104AA000012823D00F20F8BD1020F8BD0720F8BD45 +:104AB00002272F702079012814D0002028716079F6 +:104AC000002811D003206871A0689630A860E068C3 +:104AD000E860E868224C14346060FDF75EFB2060FB +:104AE000B77019E00320E9E70220ECE70020287006 +:104AF0002079012816D0002028716079002813D071 +:104B000003206871A168F068FDF7DEFDA860E06829 +:104B10009630E8600320B0701249F078FDF7B7FFD7 +:104B20000020F8BD0320E7E70220EAE710B50E48B1 +:104B3000816A0E4A11400A4A126911438162FDF7E7 +:104B400077FA10BD10B5064CE078FDF70CFB082095 +:104B5000FDF778F90520A07000202070607010BD6E +:104B60004C010020781D002000050040FD7EFF7FE5 +:104B70000A4A022151600A490B68002BFCD0906060 +:104B800008680028FCD00020506008680028FCD08D +:104B900070470120000740697047000000E50140B0 +:104BA00000E4014070477047034610B50B439B0774 +:104BB0000FD1042A0DD308C810C9121FA342F8D080 +:104BC00018BA21BA884201D9012010BD0020C04383 +:104BD00010BD002A03D0D30703D0521C07E00020E9 +:104BE00010BD03780C78401C491C1B1B07D10378AF +:104BF0000C78401C491C1B1B01D1921EF1D1184698 +:104C000010BDF8B5042A2CD3830712D00B78491CA9 +:104C10000370401C521E83070BD00B78491C037095 +:104C2000401C521E830704D00B78491C0370401CA3 +:104C3000521E8B079B0F05D0C91ADF002023DE1BF5 +:104C400008C90AE0ECF7C0FAF8BD1D4608C9FD40E6 +:104C50001C46B4402C4310C0121F042AF5D2F3089E +:104C6000C91A521EF0D40B78491C0370401C521E06 +:104C7000EAD40B78491C0370401C521EE4D4097816 +:104C80000170F8BD01E004C0091F0429FBD28B07A5 +:104C900001D50280801CC90700D00270704700292E +:104CA0000BD0C30702D00270401C491E022904D356 +:104CB000830702D50280801C891EE3E70022EEE70D +:104CC0000022DFE70378C2781946437812061B02F8 +:104CD00019438378C0781B04194311430902090A58 +:104CE000000608437047020A08704A70020C8A7076 +:104CF000020ECA707047002203098B4273D3030A65 +:104D00008B4258D3030B8B423CD3030C8B4221D3F1 +:104D100012E003460B437FD4002243088B4274D336 +:104D200003098B425FD3030A8B4244D3030B8B42AC +:104D300028D3030C8B420DD3FF22090212BA030CB5 +:104D40008B4202D31212090265D0030B8B4219D396 +:104D500000E0090AC30B8B4201D3CB03C01A5241B6 +:104D6000830B8B4201D38B03C01A5241430B8B42FE +:104D700001D34B03C01A5241030B8B4201D30B03E7 +:104D8000C01A5241C30A8B4201D3CB02C01A52410E +:104D9000830A8B4201D38B02C01A5241430A8B42D1 +:104DA00001D34B02C01A5241030A8B4201D30B02BA +:104DB000C01A5241CDD2C3098B4201D3CB01C01AD4 +:104DC000524183098B4201D38B01C01A52414309DE +:104DD0008B4201D34B01C01A524103098B4201D3CC +:104DE0000B01C01A5241C3088B4201D3CB00C01A39 +:104DF000524183088B4201D38B00C01A52414308B1 +:104E00008B4201D34B00C01A5241411A00D20146D5 +:104E10005241104670475DE0CA0F00D0494203106E +:104E200000D34042534000229C4603098B422DD3BD +:104E3000030A8B4212D3FC22890112BA030A8B4265 +:104E40000CD3890192118B4208D3890192118B42B4 +:104E500004D389013AD0921100E08909C3098B4239 +:104E600001D3CB01C01A524183098B4201D38B017C +:104E7000C01A524143098B4201D34B01C01A52411F +:104E800003098B4201D30B01C01A5241C3088B4264 +:104E900001D3CB00C01A524183088B4201D38B004F +:104EA000C01A5241D9D243088B4201D34B00C01AD9 +:104EB0005241411A00D20146634652415B101046EE +:104EC00001D34042002B00D54942704763465B1036 +:104ED00000D3404201B50020C046C04602BD704725 +:104EE0007047704710B500F059F810BD30B58C18F8 +:104EF0000278401C13071B0F01D10378401C1209D4 +:104F000006D10278401C03E00578401C0D70491C56 +:104F10005B1EF9D101E00B70491C521EFBD1A1426E +:104F2000E6D3002030BD000001231B68134B18603E +:104F3000134B1960134B1A607047134A134B1360DD +:104F40007246053AF0E7114A0F4B1B689A420ED1A0 +:104F50000D4B0020186001980D4B04B598470CBC10 +:104F60009E460246029800990A4B1B68184706980D +:104F70000599094B1B68DB68184700007001002089 +:104F8000740100207801002068010020EFBEADDE32 +:104F9000C538010028010020040000201D481E49DA +:104FA0007047FFF7FBFFECF7C9F800BD01200007D1 +:104FB000C06AC0B2FF2804D118481949096888425C +:104FC00002D01848184901601848194909688842F0 +:104FD00003D1184A13605B68184700BD20BFFDE786 +:104FE00012481349096888420ED1134B18680B49BF +:104FF0008842F3D080F308881049884204DD1048C5 +:10500000026802210A4302600E4880470E4880472A +:105010000E480047881D0020881D0020FFFFFFFF6D +:10502000001000102C0500400800000000100000D7 +:10503000000000200400002000600100002000208B +:1050400024050040DB380100AD4F0100294F01006D +:105050001348704502D1EFF3098101E0EFF30881B5 +:10506000886902380078102814DB202810DB2328F8 +:105070000BDB0C4A12680C4B9A4203D1602804DB0C +:105080000A4A1047022008607047094A104700008A +:10509000084A1047084A12682C321268104700006C +:1050A000FDFFFFFF1C010020BEBAFECAAD120000CA +:1050B0009B390100733E0100040000200D4B0E4996 +:1050C00008470E4B0C4908470D4B0B4908470D4B41 +:1050D000094908470C4B084908470C4B0649084743 +:1050E0000B4B054908470B4B034908470A4B02493C +:1050F00008470000FD2D00008D3D0000B52F000089 +:10510000333C0000E13B000095390000B91200007B +:1051100063170000F53C0000A32B000030B4744678 +:10512000641E2578641CAB4200D21D46635D5B00A3 +:10513000E31830BC1847000002490020C86120393C +:1051400008727047E003002000020207FFFFFFFF24 +:105150000000FFFF0102040810204080555555D67D +:10516000BE898E00F401FA00960064004B00320004 +:105170001E001400010003000000010000000000F8 +:105180000000000000000000000000008700000098 +:10519000000000000000000000000000000002030A +:1051A000040500000E0F0000D85101000800002087 +:1051B0001000000004110000E85101001800002058 +:1051C00064010000EC4E01000C5201007C01002043 +:1051D0000C1C000020110000024902220868104245 +:1051E000FCD0704700E200E0E1078F56FF9900CD48 +:1051F00029022B013601000100EC3720FB349B5FB4 +:0C5200008074800010027001E42D4F014A +:00000001FF
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/PeripheralNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,58 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2013 Nordic Semiconductor
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define STDIO_UART_TX TX_PIN_NUMBER
+#define STDIO_UART_RX RX_PIN_NUMBER
+#define STDIO_UART UART_0
+
+typedef enum {
+ UART_0 = (int)NRF_UART0_BASE
+} UARTName;
+
+
+typedef enum {
+ SPI_0 = (int)NRF_SPI0_BASE,
+ SPI_1 = (int)NRF_SPI1_BASE,
+ SPIS = (int)NRF_SPIS1_BASE
+} SPIName;
+
+typedef enum {
+ PWM_1 = 0,
+ PWM_2
+} PWMName;
+
+typedef enum {
+ I2C_0 = (int)NRF_TWI0_BASE,
+ I2C_1 = (int)NRF_TWI1_BASE
+} I2CName;
+
+typedef enum {
+ ADC0_0 = (int)NRF_ADC_BASE
+} ADCName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/PortNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,30 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2013 Nordic Semiconductor
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ Port0 = 0 //GPIO pins 0-31
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_BLE_SMURFS/PinNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,143 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2013 Nordic Semiconductor
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT 3
+
+typedef enum {
+ p0 = 0,
+ p1 = 1,
+ p2 = 2,
+ p3 = 3,
+ p4 = 4,
+ p5 = 5,
+ p6 = 6,
+ p7 = 7,
+ p8 = 8,
+ p9 = 9,
+ p10 = 10,
+ p11 = 11,
+ p12 = 12,
+ p13 = 13,
+ p14 = 14,
+ p15 = 15,
+ p16 = 16,
+ p17 = 17,
+ p18 = 18,
+ p19 = 19,
+ p20 = 20,
+ p21 = 21,
+ p22 = 22,
+ p23 = 23,
+ p24 = 24,
+ p25 = 25,
+ p26 = 26,
+ p27 = 27,
+ p28 = 28,
+ p29 = 29,
+ p30 = 30,
+// p31=31,
+
+ P0_0 = p0,
+ P0_1 = p1,
+ P0_2 = p2,
+ P0_3 = p3,
+ P0_4 = p4,
+ P0_5 = p5,
+ P0_6 = p6,
+ P0_7 = p7,
+
+ P0_8 = p8,
+ P0_9 = p9,
+ P0_10 = p10,
+ P0_11 = p11,
+ P0_12 = p12,
+ P0_13 = p13,
+ P0_14 = p14,
+ P0_15 = p15,
+
+ P0_16 = p16,
+ P0_17 = p17,
+ P0_18 = p18,
+ P0_19 = p19,
+ P0_20 = p20,
+ P0_21 = p21,
+ P0_22 = p22,
+ P0_23 = p23,
+
+ P0_24 = p24,
+ P0_25 = p25,
+ P0_26 = p26,
+ P0_27 = p27,
+ P0_28 = p28,
+ P0_29 = p29,
+ P0_30 = p30,
+
+ LED1 = p21,
+ LED2 = p22,
+ LED3 = p23,
+ LED4 = p24,
+
+ BUTTON1 = p17,
+ BUTTON = BUTTON1,
+
+ RX_PIN_NUMBER = p11,
+ TX_PIN_NUMBER = p9,
+ CTS_PIN_NUMBER = p10,
+ RTS_PIN_NUMBER = p8,
+
+ // mbed interface Pins
+ USBTX = TX_PIN_NUMBER,
+ USBRX = RX_PIN_NUMBER,
+
+ I2C_SDA0 = p18,
+ I2C_SCL0 = p19,
+
+ MPU6050_SDA_PIN = p18,
+ MPU6050_SCL_PIN = p19,
+ MPU6050_INT_PIN = p20,
+
+ BATTERY_PIN = p1,
+ VCC_CTRL_PIN = p30,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullDown = 1,
+ PullUp = 3,
+ PullDefault = PullUp
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/TARGET_BLE_SMURFS/device.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,57 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 0 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_CAN 0 + +#define DEVICE_RTC 0 + +#define DEVICE_ETHERNET 0 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 + +#define DEVICE_SLEEP 1 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 0 + +#define DEVICE_ERROR_PATTERN 1 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_GPIO_OBJECT_H
+#define MBED_GPIO_OBJECT_H
+
+#include "mbed_assert.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ uint32_t mask;
+
+ __IO uint32_t *reg_dir;
+ __IO uint32_t *reg_set;
+ __IO uint32_t *reg_clr;
+ __I uint32_t *reg_in;
+} gpio_t;
+
+static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ if (value)
+ *obj->reg_set = obj->mask;
+ else
+ *obj->reg_clr = obj->mask;
+}
+
+static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ return ((*obj->reg_in & obj->mask) ? 1 : 0);
+}
+
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TARGET_NORDIC/TARGET_MCU_NRF51822/objects.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,86 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2013 Nordic Semiconductor
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define I2C_SPI_PERIPHERAL_FOR_I2C 1
+#define I2C_SPI_PERIPHERAL_FOR_SPI 2
+
+typedef struct {
+ uint8_t usage; // I2C: 1, SPI: 2
+ uint8_t sda_mosi;
+ uint8_t scl_miso;
+ uint8_t sclk;
+} i2c_spi_peripheral_t;
+
+struct serial_s {
+ NRF_UART_Type *uart;
+ int index;
+};
+
+struct spi_s {
+ NRF_SPI_Type *spi;
+ NRF_SPIS_Type *spis;
+ uint8_t peripheral;
+};
+
+struct port_s {
+ __IO uint32_t *reg_cnf;
+ __IO uint32_t *reg_out;
+ __I uint32_t *reg_in;
+ PortName port;
+ uint32_t mask;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+};
+
+struct i2c_s {
+ NRF_TWI_Type *i2c;
+ PinName sda;
+ PinName scl;
+ int freq;
+ uint8_t address_set;
+ uint8_t peripheral;
+};
+
+struct analogin_s {
+ ADCName adc;
+ uint8_t adc_pin;
+};
+
+struct gpio_irq_s {
+ uint32_t ch;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
Binary file TARGET_BLE_SMURFS/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_BLE_SMURFS/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_BLE_SMURFS/TOOLCHAIN_ARM_STD/mbed.ar has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TOOLCHAIN_ARM_STD/nRF51822.sct Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,27 @@
+;WITHOUT SOFTDEVICE:
+;LR_IROM1 0x00000000 0x00040000 {
+; ER_IROM1 0x00000000 0x00040000 {
+; *.o (RESET, +First)
+; *(InRoot$$Sections)
+; .ANY (+RO)
+; }
+; RW_IRAM1 0x20000000 0x00004000 {
+; .ANY (+RW +ZI)
+; }
+;}
+;
+;WITH SOFTDEVICE:
+
+LR_IROM1 0x16000 0x002A000 {
+ ER_IROM1 0x16000 0x002A000 {
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+ RW_IRAM1 0x20002000 0x00002000 {
+ .ANY (+RW +ZI)
+ }
+}
+
+
+
Binary file TARGET_BLE_SMURFS/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_BLE_SMURFS/TOOLCHAIN_ARM_STD/startup_nRF51822.o has changed
Binary file TARGET_BLE_SMURFS/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_BLE_SMURFS/TOOLCHAIN_ARM_STD/system_nrf51822.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/TOOLCHAIN_GCC_ARM/NRF51822.ld Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,151 @@
+/* Linker script to configure memory regions. */
+
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x00016000, LENGTH = 0x2A000
+ RAM (rwx) : ORIGIN = 0x20002000, LENGTH = 0x2000
+}
+
+OUTPUT_FORMAT ("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.Vectors))
+ *(.text*)
+
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ *(.jcr)
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+
+ } > RAM
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start__ = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ } > RAM
+
+ .heap (COPY):
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy (COPY):
+ {
+ *(.stack*)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
Binary file TARGET_BLE_SMURFS/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_BLE_SMURFS/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_BLE_SMURFS/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_BLE_SMURFS/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_BLE_SMURFS/TOOLCHAIN_GCC_ARM/startup_NRF51822.o has changed
Binary file TARGET_BLE_SMURFS/TOOLCHAIN_GCC_ARM/system_nrf51822.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_BLE_SMURFS/cmsis.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,13 @@ +/* mbed Microcontroller Library - CMSIS + * Copyright (C) 2009-2011 ARM Limited. All rights reserved. + * + * A generic CMSIS include header, pulling in LPC407x_8x specifics + */ + +#ifndef MBED_CMSIS_H +#define MBED_CMSIS_H + +#include "nrf51822.h" +#include "cmsis_nvic.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/cmsis_nvic.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,53 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2011 ARM Limited. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of ARM Limited nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+#define NVIC_NUM_VECTORS (16 + 32) // CORE + MCU Peripherals
+#define NVIC_USER_IRQ_OFFSET 16
+
+#include "nrf51822.h"
+#include "cmsis.h"
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
+uint32_t NVIC_GetVector(IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/compiler_abstraction.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,49 @@
+/* Copyright (c) 2009 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is confidential property of Nordic
+ * Semiconductor ASA.Terms and conditions of usage are described in detail
+ * in NORDIC SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+#ifndef _COMPILER_ABSTRACTION_H
+#define _COMPILER_ABSTRACTION_H
+
+/*lint ++flb "Enter library region" */
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+ #define __current_sp() __get_SP()
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+static __INLINE unsigned int __current_sp(void)
+ {
+ register unsigned sp asm("sp");
+ return sp;
+ }
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/*lint --flb "Leave library region" */
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/core_ca9.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,271 @@
+/**************************************************************************//**
+ * @file core_ca9.h
+ * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File
+ * @version
+ * @date 25 March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CA9_H_GENERIC
+#define __CORE_CA9_H_GENERIC
+
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_A9
+ @{
+ */
+
+/* CMSIS CA9 definitions */
+#define __CA9_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CA9_CMSIS_VERSION_SUB (0x10) /*!< [15:0] CMSIS HAL sub version */
+#define __CA9_CMSIS_VERSION ((__CA9_CMSIS_VERSION_MAIN << 16) | \
+ __CA9_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_A (0x09) /*!< Cortex-A Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /*!< standard types definitions */
+#include "core_caInstr.h" /*!< Core Instruction Access */
+#include "core_caFunc.h" /*!< Core Function Access */
+#include "core_cm4_simd.h" /*!< Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CA9_H_DEPENDANT
+#define __CORE_CA9_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CA9_REV
+ #define __CA9_REV 0x0000
+ #warning "__CA9_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 1
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 1
+ #endif
+
+ #if __Vendor_SysTickConfig == 0
+ #error "__Vendor_SysTickConfig set to 0, but vendor systick timer must be supplied for Cortex-A9"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_A9 */
+
+
+/*******************************************************************************
+ * Register Abstraction
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-A processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t reserved1:7; /*!< bit: 20..23 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/*@} end of group CMSIS_CORE */
+
+/*@} end of CMSIS_Core_FPUFunctions */
+
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/core_caFunc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,592 @@
+/**************************************************************************//**
+ * @file core_caFunc.h
+ * @brief CMSIS Cortex-A Core Function Access Header File
+ * @version V3.10
+ * @date 9 May 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CAFUNC_H__
+#define __CORE_CAFUNC_H__
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get CPSR Register
+
+ This function returns the content of the CPSR Register.
+
+ \return CPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_CPSR(void)
+{
+ register uint32_t __regCPSR __ASM("cpsr");
+ return(__regCPSR);
+}
+
+/** \brief Set Stack Pointer
+
+ This function assigns the given value to the current stack pointer.
+
+ \param [in] topOfStack Stack Pointer value to set
+ */
+register uint32_t __regSP __ASM("sp");
+__STATIC_INLINE void __set_SP(uint32_t topOfStack)
+{
+ __regSP = topOfStack;
+}
+
+
+/** \brief Get link register
+
+ This function returns the value of the link register
+
+ \return Value of link register
+ */
+register uint32_t __reglr __ASM("lr");
+__STATIC_INLINE uint32_t __get_LR(void)
+{
+ return(__reglr);
+}
+
+/** \brief Set link register
+
+ This function sets the value of the link register
+
+ \param [in] lr LR value to set
+ */
+__STATIC_INLINE void __set_LR(uint32_t lr)
+{
+ __reglr = lr;
+}
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_PSP(uint32_t topOfProcStack)
+{
+ ARM
+ PRESERVE8
+
+ BIC R0, R0, #7 ;ensure stack is 8-byte aligned
+ MRS R1, CPSR
+ CPS #MODE_SYS ;no effect in USR mode
+ MOV SP, R0
+ MSR CPSR_c, R1 ;no effect in USR mode
+ ISB
+ BX LR
+
+}
+
+/** \brief Set User Mode
+
+ This function changes the processor state to User Mode
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_CPS_USR(void)
+{
+ ARM
+
+ CPS #MODE_USR
+ BX LR
+}
+
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+/** \brief Get FPEXC
+
+ This function returns the current value of the Floating Point Exception Control register.
+
+ \return Floating Point Exception Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPEXC(void)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ return(__regfpexc);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPEXC
+
+ This function assigns the given value to the Floating Point Exception Control register.
+
+ \param [in] fpscr Floating Point Exception Control value to set
+ */
+__STATIC_INLINE void __set_FPEXC(uint32_t fpexc)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ __regfpexc = (fpexc);
+#endif
+}
+
+/** \brief Get CPACR
+
+ This function returns the current value of the Coprocessor Access Control register.
+
+ \return Coprocessor Access Control register value
+ */
+__STATIC_INLINE uint32_t __get_CPACR(void)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ return __regCPACR;
+}
+
+/** \brief Set CPACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] cpacr Coporcessor Acccess Control value to set
+ */
+__STATIC_INLINE void __set_CPACR(uint32_t cpacr)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ __regCPACR = cpacr;
+ __ISB();
+}
+
+/** \brief Get CBAR
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Configuration Base Address register value
+ */
+__STATIC_INLINE uint32_t __get_CBAR() {
+ register uint32_t __regCBAR __ASM("cp15:4:c15:c0:0");
+ return(__regCBAR);
+}
+
+/** \brief Get TTBR0
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Translation Table Base Register 0 value
+ */
+__STATIC_INLINE uint32_t __get_TTBR0() {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ return(__regTTBR0);
+}
+
+/** \brief Set TTBR0
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] ttbr0 Translation Table Base Register 0 value to set
+ */
+__STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ __regTTBR0 = ttbr0;
+ __ISB();
+}
+
+/** \brief Get DACR
+
+ This function returns the value of the Domain Access Control Register.
+
+ \return Domain Access Control Register value
+ */
+__STATIC_INLINE uint32_t __get_DACR() {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ return(__regDACR);
+}
+
+/** \brief Set DACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] dacr Domain Access Control Register value to set
+ */
+__STATIC_INLINE void __set_DACR(uint32_t dacr) {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ __regDACR = dacr;
+ __ISB();
+}
+
+/******************************** Cache and BTAC enable ****************************************************/
+
+/** \brief Set SCTLR
+
+ This function assigns the given value to the System Control Register.
+
+ \param [in] sctlr System Control Register, value to set
+ */
+__STATIC_INLINE void __set_SCTLR(uint32_t sctlr)
+{
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ __regSCTLR = sctlr;
+}
+
+/** \brief Get SCTLR
+
+ This function returns the value of the System Control Register.
+
+ \return System Control Register value
+ */
+__STATIC_INLINE uint32_t __get_SCTLR() {
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ return(__regSCTLR);
+}
+
+/** \brief Enable Caches
+
+ Enable Caches
+ */
+__STATIC_INLINE void __enable_caches(void) {
+ // Set I bit 12 to enable I Cache
+ // Set C bit 2 to enable D Cache
+ __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief Disable Caches
+
+ Disable Caches
+ */
+__STATIC_INLINE void __disable_caches(void) {
+ // Clear I bit 12 to disable I Cache
+ // Clear C bit 2 to disable D Cache
+ __set_SCTLR( __get_SCTLR() & ~(1 << 12) & ~(1 << 2));
+ __ISB();
+}
+
+/** \brief Enable BTAC
+
+ Enable BTAC
+ */
+__STATIC_INLINE void __enable_btac(void) {
+ // Set Z bit 11 to enable branch prediction
+ __set_SCTLR( __get_SCTLR() | (1 << 11));
+ __ISB();
+}
+
+/** \brief Disable BTAC
+
+ Disable BTAC
+ */
+__STATIC_INLINE void __disable_btac(void) {
+ // Clear Z bit 11 to disable branch prediction
+ __set_SCTLR( __get_SCTLR() & ~(1 << 11));
+}
+
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __enable_mmu(void) {
+ // Set M bit 0 to enable the MMU
+ // Set AFE bit to enable simplified access permissions model
+ // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+ __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+ __ISB();
+}
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __disable_mmu(void) {
+ // Clear M bit 0 to disable the MMU
+ __set_SCTLR( __get_SCTLR() & ~1);
+ __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief Invalidate the whole tlb
+
+ TLBIALL. Invalidate the whole tlb
+ */
+
+__STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+ register uint32_t __TLBIALL __ASM("cp15:0:c8:c7:0");
+ __TLBIALL = 0;
+ __DSB();
+ __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief Invalidate entire branch predictor array
+
+ BPIALL. Branch Predictor Invalidate All.
+ */
+
+__STATIC_INLINE void __v7_inv_btac(void) {
+ register uint32_t __BPIALL __ASM("cp15:0:c7:c5:6");
+ __BPIALL = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief Invalidate the whole I$
+
+ ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+__STATIC_INLINE void __v7_inv_icache_all(void) {
+ register uint32_t __ICIALLU __ASM("cp15:0:c7:c5:0");
+ __ICIALLU = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new I cache state
+}
+
+/** \brief Clean D$ by MVA
+
+ DCCMVAC. Data cache clean by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_dcache_mva(void *va) {
+ register uint32_t __DCCMVAC __ASM("cp15:0:c7:c10:1");
+ __DCCMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Invalidate D$ by MVA
+
+ DCIMVAC. Data cache invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_inv_dcache_mva(void *va) {
+ register uint32_t __DCIMVAC __ASM("cp15:0:c7:c6:1");
+ __DCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Clean and Invalidate D$ by MVA
+
+ DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+ register uint32_t __DCCIMVAC __ASM("cp15:0:c7:c14:1");
+ __DCCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief
+ * Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency.
+ */
+#pragma push
+#pragma arm
+__STATIC_ASM void __v7_all_cache(uint32_t op) {
+ ARM
+
+ PUSH {R4-R11}
+
+ MRC p15, 1, R6, c0, c0, 1 // Read CLIDR
+ ANDS R3, R6, #0x07000000 // Extract coherency level
+ MOV R3, R3, LSR #23 // Total cache levels << 1
+ BEQ Finished // If 0, no need to clean
+
+ MOV R10, #0 // R10 holds current cache level << 1
+Loop1 ADD R2, R10, R10, LSR #1 // R2 holds cache "Set" position
+ MOV R1, R6, LSR R2 // Bottom 3 bits are the Cache-type for this level
+ AND R1, R1, #7 // Isolate those lower 3 bits
+ CMP R1, #2
+ BLT Skip // No cache or only instruction cache at this level
+
+ MCR p15, 2, R10, c0, c0, 0 // Write the Cache Size selection register
+ ISB // ISB to sync the change to the CacheSizeID reg
+ MRC p15, 1, R1, c0, c0, 0 // Reads current Cache Size ID register
+ AND R2, R1, #7 // Extract the line length field
+ ADD R2, R2, #4 // Add 4 for the line length offset (log2 16 bytes)
+ LDR R4, =0x3FF
+ ANDS R4, R4, R1, LSR #3 // R4 is the max number on the way size (right aligned)
+ CLZ R5, R4 // R5 is the bit position of the way size increment
+ LDR R7, =0x7FFF
+ ANDS R7, R7, R1, LSR #13 // R7 is the max number of the index size (right aligned)
+
+Loop2 MOV R9, R4 // R9 working copy of the max way size (right aligned)
+
+Loop3 ORR R11, R10, R9, LSL R5 // Factor in the Way number and cache number into R11
+ ORR R11, R11, R7, LSL R2 // Factor in the Set number
+ CMP R0, #0
+ BNE Dccsw
+ MCR p15, 0, R11, c7, c6, 2 // DCISW. Invalidate by Set/Way
+ B cont
+Dccsw CMP R0, #1
+ BNE Dccisw
+ MCR p15, 0, R11, c7, c10, 2 // DCCSW. Clean by Set/Way
+ B cont
+Dccisw MCR p15, 0, R11, c7, c14, 2 // DCCISW, Clean and Invalidate by Set/Way
+cont SUBS R9, R9, #1 // Decrement the Way number
+ BGE Loop3
+ SUBS R7, R7, #1 // Decrement the Set number
+ BGE Loop2
+Skip ADD R10, R10, #2 // increment the cache number
+ CMP R3, R10
+ BGT Loop1
+
+Finished
+ DSB
+ POP {R4-R11}
+ BX lr
+
+}
+#pragma pop
+
+/** \brief __v7_all_cache - helper function
+
+ */
+
+/** \brief Invalidate the whole D$
+
+ DCISW. Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_inv_dcache_all(void) {
+ __v7_all_cache(0);
+}
+
+/** \brief Clean the whole D$
+
+ DCCSW. Clean by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_dcache_all(void) {
+ __v7_all_cache(1);
+}
+
+/** \brief Clean and invalidate the whole D$
+
+ DCCISW. Clean and Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_inv_dcache_all(void) {
+ __v7_all_cache(2);
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__ICCARM__)) /*---------------- ICC Compiler ---------------------*/
+
+#error IAR Compiler support not implemented for Cortex-A
+
+#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
+
+//#error GNU Compiler support not implemented for Cortex-A
+
+#elif (defined (__TASKING__)) /*--------------- TASKING Compiler -----------------*/
+
+#error TASKING Compiler support not implemented for Cortex-A
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CAFUNC_H__ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_BLE_SMURFS/core_caInstr.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,45 @@ +/**************************************************************************//** + * @file core_caInstr.h + * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File + * @version + * @date 04. December 2012 + * + * @note + * + ******************************************************************************/ +/* Copyright (c) 2009 - 2012 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + +#ifndef __CORE_CAINSTR_H__ +#define __CORE_CAINSTR_H__ + +#define __CORTEX_M 0x3 +#include "core_cmInstr.h" +#undef __CORTEX_M + +#endif +
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/core_ca_mmu.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,848 @@
+;/**************************************************************************//**
+; * @file core_ca_mmu.h
+; * @brief MMU Startup File for
+; * VE_A9_MP Device Series
+; * @version V1.01
+; * @date 25 March 2013
+; *
+; * @note
+; *
+; ******************************************************************************/
+;/* Copyright (c) 2012 ARM LIMITED
+;
+; All rights reserved.
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+; - Redistributions of source code must retain the above copyright
+; notice, this list of conditions and the following disclaimer.
+; - Redistributions in binary form must reproduce the above copyright
+; notice, this list of conditions and the following disclaimer in the
+; documentation and/or other materials provided with the distribution.
+; - Neither the name of ARM nor the names of its contributors may be used
+; to endorse or promote products derived from this software without
+; specific prior written permission.
+; *
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+; ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+; LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+; CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+; SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+; INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+; CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+; ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+; POSSIBILITY OF SUCH DAMAGE.
+; ---------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef _MMU_FUNC_H
+#define _MMU_FUNC_H
+
+#define SECTION_DESCRIPTOR (0x2)
+#define SECTION_MASK (0xFFFFFFFC)
+
+#define SECTION_TEXCB_MASK (0xFFFF8FF3)
+#define SECTION_B_SHIFT (2)
+#define SECTION_C_SHIFT (3)
+#define SECTION_TEX0_SHIFT (12)
+#define SECTION_TEX1_SHIFT (13)
+#define SECTION_TEX2_SHIFT (14)
+
+#define SECTION_XN_MASK (0xFFFFFFEF)
+#define SECTION_XN_SHIFT (4)
+
+#define SECTION_DOMAIN_MASK (0xFFFFFE1F)
+#define SECTION_DOMAIN_SHIFT (5)
+
+#define SECTION_P_MASK (0xFFFFFDFF)
+#define SECTION_P_SHIFT (9)
+
+#define SECTION_AP_MASK (0xFFFF73FF)
+#define SECTION_AP_SHIFT (10)
+#define SECTION_AP2_SHIFT (15)
+
+#define SECTION_S_MASK (0xFFFEFFFF)
+#define SECTION_S_SHIFT (16)
+
+#define SECTION_NG_MASK (0xFFFDFFFF)
+#define SECTION_NG_SHIFT (17)
+
+#define SECTION_NS_MASK (0xFFF7FFFF)
+#define SECTION_NS_SHIFT (19)
+
+
+#define PAGE_L1_DESCRIPTOR (0x1)
+#define PAGE_L1_MASK (0xFFFFFFFC)
+
+#define PAGE_L2_4K_DESC (0x2)
+#define PAGE_L2_4K_MASK (0xFFFFFFFD)
+
+#define PAGE_L2_64K_DESC (0x1)
+#define PAGE_L2_64K_MASK (0xFFFFFFFC)
+
+#define PAGE_4K_TEXCB_MASK (0xFFFFFE33)
+#define PAGE_4K_B_SHIFT (2)
+#define PAGE_4K_C_SHIFT (3)
+#define PAGE_4K_TEX0_SHIFT (6)
+#define PAGE_4K_TEX1_SHIFT (7)
+#define PAGE_4K_TEX2_SHIFT (8)
+
+#define PAGE_64K_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_64K_B_SHIFT (2)
+#define PAGE_64K_C_SHIFT (3)
+#define PAGE_64K_TEX0_SHIFT (12)
+#define PAGE_64K_TEX1_SHIFT (13)
+#define PAGE_64K_TEX2_SHIFT (14)
+
+#define PAGE_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_B_SHIFT (2)
+#define PAGE_C_SHIFT (3)
+#define PAGE_TEX_SHIFT (12)
+
+#define PAGE_XN_4K_MASK (0xFFFFFFFE)
+#define PAGE_XN_4K_SHIFT (0)
+#define PAGE_XN_64K_MASK (0xFFFF7FFF)
+#define PAGE_XN_64K_SHIFT (15)
+
+
+#define PAGE_DOMAIN_MASK (0xFFFFFE1F)
+#define PAGE_DOMAIN_SHIFT (5)
+
+#define PAGE_P_MASK (0xFFFFFDFF)
+#define PAGE_P_SHIFT (9)
+
+#define PAGE_AP_MASK (0xFFFFFDCF)
+#define PAGE_AP_SHIFT (4)
+#define PAGE_AP2_SHIFT (9)
+
+#define PAGE_S_MASK (0xFFFFFBFF)
+#define PAGE_S_SHIFT (10)
+
+#define PAGE_NG_MASK (0xFFFFF7FF)
+#define PAGE_NG_SHIFT (11)
+
+#define PAGE_NS_MASK (0xFFFFFFF7)
+#define PAGE_NS_SHIFT (3)
+
+#define OFFSET_1M (0x00100000)
+#define OFFSET_64K (0x00010000)
+#define OFFSET_4K (0x00001000)
+
+#define DESCRIPTOR_FAULT (0x00000000)
+
+/* ########################### MMU Function Access ########################### */
+/** \ingroup MMU_FunctionInterface
+ \defgroup MMU_Functions MMU Functions Interface
+ @{
+ */
+
+/* Attributes enumerations */
+
+/* Region size attributes */
+typedef enum
+{
+ SECTION,
+ PAGE_4k,
+ PAGE_64k,
+} mmu_region_size_Type;
+
+/* Region type attributes */
+typedef enum
+{
+ NORMAL,
+ DEVICE,
+ SHARED_DEVICE,
+ NON_SHARED_DEVICE,
+ STRONGLY_ORDERED
+} mmu_memory_Type;
+
+/* Region cacheability attributes */
+typedef enum
+{
+ NON_CACHEABLE,
+ WB_WA,
+ WT,
+ WB_NO_WA,
+} mmu_cacheability_Type;
+
+/* Region parity check attributes */
+typedef enum
+{
+ ECC_DISABLED,
+ ECC_ENABLED,
+} mmu_ecc_check_Type;
+
+/* Region execution attributes */
+typedef enum
+{
+ EXECUTE,
+ NON_EXECUTE,
+} mmu_execute_Type;
+
+/* Region global attributes */
+typedef enum
+{
+ GLOBAL,
+ NON_GLOBAL,
+} mmu_global_Type;
+
+/* Region shareability attributes */
+typedef enum
+{
+ NON_SHARED,
+ SHARED,
+} mmu_shared_Type;
+
+/* Region security attributes */
+typedef enum
+{
+ SECURE,
+ NON_SECURE,
+} mmu_secure_Type;
+
+/* Region access attributes */
+typedef enum
+{
+ NO_ACCESS,
+ RW,
+ READ,
+} mmu_access_Type;
+
+/* Memory Region definition */
+typedef struct RegionStruct {
+ mmu_region_size_Type rg_t;
+ mmu_memory_Type mem_t;
+ uint8_t domain;
+ mmu_cacheability_Type inner_norm_t;
+ mmu_cacheability_Type outer_norm_t;
+ mmu_ecc_check_Type e_t;
+ mmu_execute_Type xn_t;
+ mmu_global_Type g_t;
+ mmu_secure_Type sec_t;
+ mmu_access_Type priv_t;
+ mmu_access_Type user_t;
+ mmu_shared_Type sh_t;
+
+} mmu_region_attributes_Type;
+
+/** \brief Set section execution-never attribute
+
+ The function sets section execution-never attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] xn Section execution-never attribute : EXECUTE , NON_EXECUTE.
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_section(uint32_t *descriptor_l1, mmu_execute_Type xn)
+{
+ *descriptor_l1 &= SECTION_XN_MASK;
+ *descriptor_l1 |= ((xn & 0x1) << SECTION_XN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section domain
+
+ The function sets section domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Section domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_section(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= SECTION_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xF) << SECTION_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section parity check
+
+ The function sets section parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_section(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set section access privileges
+
+ The function sets section access privileges
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_section(uint32_t *descriptor_l1, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x6; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l1 &= SECTION_AP_MASK;
+ *descriptor_l1 |= (ap & 0x3) << SECTION_AP_SHIFT;
+ *descriptor_l1 |= ((ap & 0x4)>>2) << SECTION_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set section shareability
+
+ The function sets section shareability
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_section(uint32_t *descriptor_l1, mmu_shared_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_S_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Global attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] g_bit Section attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_section(uint32_t *descriptor_l1, mmu_global_Type g_bit)
+{
+ *descriptor_l1 &= SECTION_NG_MASK;
+ *descriptor_l1 |= ((g_bit & 0x1) << SECTION_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Security attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_section(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_NS_SHIFT);
+ return 0;
+}
+
+/* Page 4k or 64k */
+/** \brief Set 4k/64k page execution-never attribute
+
+ The function sets 4k/64k page execution-never attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] xn Page execution-never attribute : EXECUTE , NON_EXECUTE.
+ \param [in] page Page size: PAGE_4k, PAGE_64k,
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_page(uint32_t *descriptor_l2, mmu_execute_Type xn, mmu_region_size_Type page)
+{
+ if (page == PAGE_4k)
+ {
+ *descriptor_l2 &= PAGE_XN_4K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_4K_SHIFT);
+ }
+ else
+ {
+ *descriptor_l2 &= PAGE_XN_64K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_64K_SHIFT);
+ }
+ return 0;
+}
+
+/** \brief Set 4k/64k page domain
+
+ The function sets 4k/64k page domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Page domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_page(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= PAGE_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xf) << PAGE_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page parity check
+
+ The function sets 4k/64k page parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_page(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page access privileges
+
+ The function sets 4k/64k page access privileges
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_page(uint32_t *descriptor_l2, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x6; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l2 &= PAGE_AP_MASK;
+ *descriptor_l2 |= (ap & 0x3) << PAGE_AP_SHIFT;
+ *descriptor_l2 |= ((ap & 0x4)>>2) << PAGE_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page shareability
+
+ The function sets 4k/64k page shareability
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] s_bit 4k/64k page shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_page(uint32_t *descriptor_l2, mmu_shared_Type s_bit)
+{
+ *descriptor_l2 &= PAGE_S_MASK;
+ *descriptor_l2 |= ((s_bit & 0x1) << PAGE_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Global attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] g_bit 4k/64k page attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_page(uint32_t *descriptor_l2, mmu_global_Type g_bit)
+{
+ *descriptor_l2 &= PAGE_NG_MASK;
+ *descriptor_l2 |= ((g_bit & 0x1) << PAGE_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Security attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit 4k/64k page Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_page(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= PAGE_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << PAGE_NS_SHIFT);
+ return 0;
+}
+
+
+/** \brief Set Section memory attributes
+
+ The function sets section memory attributes
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] mem Section memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_section(uint32_t *descriptor_l1, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner)
+{
+ *descriptor_l1 &= SECTION_TEXCB_MASK;
+
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l1 |= 1 << SECTION_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT) | (1 << SECTION_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT) | (1 << SECTION_TEX0_SHIFT);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page memory attributes
+
+ The function sets 4k/64k page memory attributes
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] mem 4k/64k page memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_page(uint32_t *descriptor_l2, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner, mmu_region_size_Type page)
+{
+ *descriptor_l2 &= PAGE_4K_TEXCB_MASK;
+
+ if (page == PAGE_64k)
+ {
+ //same as section
+ __memory_section(descriptor_l2, mem, outer, inner);
+ }
+ else
+ {
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l2 |= 1 << PAGE_4K_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT) | (1 << PAGE_4K_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT) | (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Create a L1 section descriptor
+
+ The function creates a section descriptor.
+
+ Assumptions:
+ - 16MB super sections not suported
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg Section attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_section_descriptor(uint32_t *descriptor, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+
+ __memory_section(descriptor, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t);
+ __xn_section(descriptor,reg.xn_t);
+ __domain_section(descriptor, reg.domain);
+ __p_section(descriptor, reg.e_t);
+ __ap_section(descriptor, reg.priv_t, reg.user_t, 1);
+ __shared_section(descriptor,reg.sh_t);
+ __global_section(descriptor,reg.g_t);
+ __secure_section(descriptor,reg.sec_t);
+ *descriptor &= SECTION_MASK;
+ *descriptor |= SECTION_DESCRIPTOR;
+
+ return 0;
+
+}
+
+
+/** \brief Create a L1 and L2 4k/64k page descriptor
+
+ The function creates a 4k/64k page descriptor.
+ Assumptions:
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg 4k/64k page attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_page_descriptor(uint32_t *descriptor, uint32_t *descriptor2, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+ *descriptor2 = 0;
+
+ switch (reg.rg_t)
+ {
+ case PAGE_4k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_4k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_4k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_4K_MASK;
+ *descriptor2 |= PAGE_L2_4K_DESC;
+ break;
+
+ case PAGE_64k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_64k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_64k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_64K_MASK;
+ *descriptor2 |= PAGE_L2_64K_DESC;
+ break;
+
+ case SECTION:
+ //error
+ break;
+
+ }
+
+ return 0;
+
+}
+
+/** \brief Create a 1MB Section
+
+ \param [in] ttb Translation table base address
+ \param [in] base_address Section base address
+ \param [in] count Number of sections to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTSection(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1)
+{
+ uint32_t offset;
+ uint32_t entry;
+ uint32_t i;
+
+ offset = base_address >> 20;
+ entry = (base_address & 0xFFF00000) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb = ttb + offset;
+
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb++ = entry;
+ entry += OFFSET_1M;
+ }
+}
+
+/** \brief Create a 4k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 4k base address
+ \param [in] count Number of 4k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_4k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFFF000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_4K;
+ }
+}
+
+/** \brief Create a 64k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 64k base address
+ \param [in] count Number of 64k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_64k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i,j;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFF0000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //create 16 entries
+ for (j = 0; j < 16; j++)
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_64K;
+ }
+}
+
+/*@} end of MMU_Functions */
+#endif
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/core_cm0.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,682 @@
+/**************************************************************************//**
+ * @file core_cm0.h
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M0
+ @{
+ */
+
+/* CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/core_cm0plus.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,793 @@
+/**************************************************************************//**
+ * @file core_cm0plus.h
+ * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0PLUS_H_GENERIC
+#define __CORE_CM0PLUS_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex-M0+
+ @{
+ */
+
+/* CMSIS CM0P definitions */
+#define __CM0PLUS_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0PLUS_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16) | \
+ __CM0PLUS_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0PLUS_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0PLUS_H_DEPENDANT
+#define __CORE_CM0PLUS_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0PLUS_REV
+ #define __CM0PLUS_REV 0x0000
+ #warning "__CM0PLUS_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __VTOR_PRESENT
+ #define __VTOR_PRESENT 0
+ #warning "__VTOR_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex-M0+ */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+#if (__VTOR_PRESENT == 1)
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+#else
+ uint32_t RESERVED0;
+#endif
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if (__VTOR_PRESENT == 1)
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 8 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 8 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0+ Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0PLUS_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/core_cm3.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1627 @@
+/**************************************************************************//**
+ * @file core_cm3.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM3_H_GENERIC
+#define __CORE_CM3_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M3
+ @{
+ */
+
+/* CMSIS CM3 definitions */
+#define __CM3_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | \
+ __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x03) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI__VFP_SUPPORT____
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM3_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM3_H_DEPENDANT
+#define __CORE_CM3_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM3_REV
+ #define __CM3_REV 0x0200
+ #warning "__CM3_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M3 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#if (__CM3_REV < 0x0201) /* core r2p1 */
+#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#else
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+#else
+ uint32_t RESERVED1[1];
+#endif
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM3_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/core_cm4.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1772 @@
+/**************************************************************************//**
+ * @file core_cm4.h
+ * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_H_GENERIC
+#define __CORE_CM4_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M4
+ @{
+ */
+
+/* CMSIS CM4 definitions */
+#define __CM4_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM4_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16) | \
+ __CM4_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x04) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+#include <core_cm4_simd.h> /* Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CM4_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM4_H_DEPENDANT
+#define __CORE_CM4_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM4_REV
+ #define __CM4_REV 0x0000
+ #warning "__CM4_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 0
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M4 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ - Core FPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISOOFP_Pos 9 /*!< ACTLR: DISOOFP Position */
+#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */
+
+#define SCnSCB_ACTLR_DISFPCA_Pos 8 /*!< ACTLR: DISFPCA Position */
+#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_FPU Floating Point Unit (FPU)
+ \brief Type definitions for the Floating Point Unit (FPU)
+ @{
+ */
+
+/** \brief Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __IO uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
+ __IO uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
+ __IO uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
+ __I uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
+ __I uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register */
+#define FPU_FPCCR_ASPEN_Pos 31 /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos 30 /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos 8 /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos 6 /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos 5 /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos 4 /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos 3 /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos 1 /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos 0 /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk (1UL << FPU_FPCCR_LSPACT_Pos) /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register */
+#define FPU_FPCAR_ADDRESS_Pos 3 /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register */
+#define FPU_FPDSCR_AHP_Pos 26 /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos 25 /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos 24 /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos 22 /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 */
+#define FPU_MVFR0_FP_rounding_modes_Pos 28 /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos 24 /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos 20 /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos 16 /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos 12 /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos 8 /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos 4 /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos 0 /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL << FPU_MVFR0_A_SIMD_registers_Pos) /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 */
+#define FPU_MVFR1_FP_fused_MAC_Pos 28 /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos 24 /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos 4 /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos 0 /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk (0xFUL << FPU_MVFR1_FtZ_mode_Pos) /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+#if (__FPU_PRESENT == 1)
+ #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
+ #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+/* NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); enable interrupt */
+ NVIC->ISER[(uint32_t)((int32_t)IRQn) >> 5] = (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM4_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/core_cm4_simd.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,673 @@
+/**************************************************************************//**
+ * @file core_cm4_simd.h
+ * @brief CMSIS Cortex-M4 SIMD Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_SIMD_H
+#define __CORE_CM4_SIMD_H
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ ******************************************************************************/
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#define __SADD8 __sadd8
+#define __QADD8 __qadd8
+#define __SHADD8 __shadd8
+#define __UADD8 __uadd8
+#define __UQADD8 __uqadd8
+#define __UHADD8 __uhadd8
+#define __SSUB8 __ssub8
+#define __QSUB8 __qsub8
+#define __SHSUB8 __shsub8
+#define __USUB8 __usub8
+#define __UQSUB8 __uqsub8
+#define __UHSUB8 __uhsub8
+#define __SADD16 __sadd16
+#define __QADD16 __qadd16
+#define __SHADD16 __shadd16
+#define __UADD16 __uadd16
+#define __UQADD16 __uqadd16
+#define __UHADD16 __uhadd16
+#define __SSUB16 __ssub16
+#define __QSUB16 __qsub16
+#define __SHSUB16 __shsub16
+#define __USUB16 __usub16
+#define __UQSUB16 __uqsub16
+#define __UHSUB16 __uhsub16
+#define __SASX __sasx
+#define __QASX __qasx
+#define __SHASX __shasx
+#define __UASX __uasx
+#define __UQASX __uqasx
+#define __UHASX __uhasx
+#define __SSAX __ssax
+#define __QSAX __qsax
+#define __SHSAX __shsax
+#define __USAX __usax
+#define __UQSAX __uqsax
+#define __UHSAX __uhsax
+#define __USAD8 __usad8
+#define __USADA8 __usada8
+#define __SSAT16 __ssat16
+#define __USAT16 __usat16
+#define __UXTB16 __uxtb16
+#define __UXTAB16 __uxtab16
+#define __SXTB16 __sxtb16
+#define __SXTAB16 __sxtab16
+#define __SMUAD __smuad
+#define __SMUADX __smuadx
+#define __SMLAD __smlad
+#define __SMLADX __smladx
+#define __SMLALD __smlald
+#define __SMLALDX __smlaldx
+#define __SMUSD __smusd
+#define __SMUSDX __smusdx
+#define __SMLSD __smlsd
+#define __SMLSDX __smlsdx
+#define __SMLSLD __smlsld
+#define __SMLSLDX __smlsldx
+#define __SEL __sel
+#define __QADD __qadd
+#define __QSUB __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
+ ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
+
+#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
+ ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
+
+#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+ ((int64_t)(ARG3) << 32) ) >> 32))
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_iar.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_ccs.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLALD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLALDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLSLD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLSLDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ if (ARG3 == 0) \
+ __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
+ else \
+ __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+/* not yet supported */
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CORE_CM4_SIMD_H */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/core_cmFunc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,636 @@
+/**************************************************************************//**
+ * @file core_cmFunc.h
+ * @brief CMSIS Cortex-M Core Function Access Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ register uint32_t __regIPSR __ASM("ipsr");
+ return(__regIPSR);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ register uint32_t __regXPSR __ASM("xpsr");
+ return(__regXPSR);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ return(__regProcessStackPointer);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ __regProcessStackPointer = topOfProcStack;
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ return(__regMainStackPointer);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ __regMainStackPointer = topOfMainStack;
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0xff);
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/** \brief Enable IRQ Interrupts
+
+ This function enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ uint32_t result;
+
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all instrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CMFUNC_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/core_cmInstr.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,688 @@
+/**************************************************************************//**
+ * @file core_cmInstr.h
+ * @brief CMSIS Cortex-M Core Instruction Access Header File
+ * @version V3.20
+ * @date 05. March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __nop
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+#define __WFI __wfi
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __wfe
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __sev
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+#define __ISB() __isb(0xF)
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() __dsb(0xF)
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() __dmb(0xF)
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __rev
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+ rev16 r0, r0
+ bx lr
+}
+#endif
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+ revsh r0, r0
+ bx lr
+}
+#endif
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+#define __ROR __ror
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __breakpoint(value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __RBIT __rbit
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXB(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXH(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXW(value, ptr) __strex(value, ptr)
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+#define __CLREX __clrex
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT __ssat
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __usat
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __clz
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constrant "l"
+ * Otherwise, use general registers, specified by constrant "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __NOP(void)
+{
+ __ASM volatile ("nop");
+}
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFI(void)
+{
+ __ASM volatile ("wfi");
+}
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFE(void)
+{
+ __ASM volatile ("wfe");
+}
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __SEV(void)
+{
+ __ASM volatile ("sev");
+}
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ISB(void)
+{
+ __ASM volatile ("isb");
+}
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DSB(void)
+{
+ __ASM volatile ("dsb");
+}
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void)
+{
+ __ASM volatile ("dmb");
+}
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+ return __builtin_bswap32(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ return (short)__builtin_bswap16(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32 - op2));
+}
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void)
+{
+ __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_BLE_SMURFS/nordic_global.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,17 @@ +#ifndef _NORDIC_GLOBAL_H_ +#define _NORDIC_GLOBAL_H_ + +/* There are no global defines in mbed, so we need to define */ +/* mandatory conditional compilation flags here */ +//#define NRF51 +#ifndef DEBUG_NRF_USER +#define DEBUG_NRF_USER +#endif +#ifndef BLE_STACK_SUPPORT_REQD +#define BLE_STACK_SUPPORT_REQD +#endif +#ifndef BOARD_PCA10001 +#define BOARD_PCA10001 +#endif + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/nrf51.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1216 @@
+/* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
+ *
+ * The information contained herein is property of Nordic Semiconductor ASA.
+ * Terms and conditions of usage are described in detail in NORDIC
+ * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
+ *
+ * Licensees are granted free, non-transferable use of the information. NO
+ * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
+ * the file.
+ *
+ */
+
+
+
+/** @addtogroup Nordic Semiconductor
+ * @{
+ */
+
+/** @addtogroup nRF51
+ * @{
+ */
+
+#ifndef NRF51_H
+#define NRF51_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/* ------------------------- Interrupt Number Definition ------------------------ */
+
+typedef enum {
+/* ------------------- Cortex-M0 Processor Exceptions Numbers ------------------- */
+ Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset */
+ NonMaskableInt_IRQn = -14, /*!< 2 Non maskable Interrupt, cannot be stopped or preempted */
+ HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */
+ SVCall_IRQn = -5, /*!< 11 System Service Call via SVC instruction */
+ DebugMonitor_IRQn = -4, /*!< 12 Debug Monitor */
+ PendSV_IRQn = -2, /*!< 14 Pendable request for system service */
+ SysTick_IRQn = -1, /*!< 15 System Tick Timer */
+/* ---------------------- nRF51 Specific Interrupt Numbers ---------------------- */
+ POWER_CLOCK_IRQn = 0, /*!< 0 POWER_CLOCK */
+ RADIO_IRQn = 1, /*!< 1 RADIO */
+ UART0_IRQn = 2, /*!< 2 UART0 */
+ SPI0_TWI0_IRQn = 3, /*!< 3 SPI0_TWI0 */
+ SPI1_TWI1_IRQn = 4, /*!< 4 SPI1_TWI1 */
+ GPIOTE_IRQn = 6, /*!< 6 GPIOTE */
+ ADC_IRQn = 7, /*!< 7 ADC */
+ TIMER0_IRQn = 8, /*!< 8 TIMER0 */
+ TIMER1_IRQn = 9, /*!< 9 TIMER1 */
+ TIMER2_IRQn = 10, /*!< 10 TIMER2 */
+ RTC0_IRQn = 11, /*!< 11 RTC0 */
+ TEMP_IRQn = 12, /*!< 12 TEMP */
+ RNG_IRQn = 13, /*!< 13 RNG */
+ ECB_IRQn = 14, /*!< 14 ECB */
+ CCM_AAR_IRQn = 15, /*!< 15 CCM_AAR */
+ WDT_IRQn = 16, /*!< 16 WDT */
+ RTC1_IRQn = 17, /*!< 17 RTC1 */
+ QDEC_IRQn = 18, /*!< 18 QDEC */
+ LPCOMP_COMP_IRQn = 19, /*!< 19 LPCOMP_COMP */
+ SWI0_IRQn = 20, /*!< 20 SWI0 */
+ SWI1_IRQn = 21, /*!< 21 SWI1 */
+ SWI2_IRQn = 22, /*!< 22 SWI2 */
+ SWI3_IRQn = 23, /*!< 23 SWI3 */
+ SWI4_IRQn = 24, /*!< 24 SWI4 */
+ SWI5_IRQn = 25 /*!< 25 SWI5 */
+} IRQn_Type;
+
+
+/** @addtogroup Configuration_of_CMSIS
+ * @{
+ */
+
+
+/* ================================================================================ */
+/* ================ Processor and Core Peripheral Section ================ */
+/* ================================================================================ */
+
+/* ----------------Configuration of the cm0 Processor and Core Peripherals---------------- */
+#define __CM0_REV 0x0301 /*!< Cortex-M0 Core Revision */
+#define __MPU_PRESENT 0 /*!< MPU present or not */
+#define __NVIC_PRIO_BITS 2 /*!< Number of Bits used for Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+/** @} */ /* End of group Configuration_of_CMSIS */
+
+#include <core_cm0.h> /*!< Cortex-M0 processor and core peripherals */
+#include "system_nrf51822.h" /*!< nRF51 System */
+
+
+/* ================================================================================ */
+/* ================ Device Specific Peripheral Section ================ */
+/* ================================================================================ */
+
+
+/** @addtogroup Device_Peripheral_Registers
+ * @{
+ */
+
+
+/* ------------------- Start of section using anonymous unions ------------------ */
+#if defined(__CC_ARM)
+ #pragma push
+ #pragma anon_unions
+#elif defined(__ICCARM__)
+ #pragma language=extended
+#elif defined(__GNUC__)
+ /* anonymous unions are enabled by default */
+#elif defined(__TMS470__)
+/* anonymous unions are enabled by default */
+#elif defined(__TASKING__)
+ #pragma warning 586
+#else
+ #warning Not supported compiler type
+#endif
+
+
+typedef struct {
+ __IO uint32_t CPU0; /*!< Configurable priority configuration register for CPU0. */
+ __IO uint32_t SPIS1; /*!< Configurable priority configuration register for SPIS1. */
+ __IO uint32_t RADIO; /*!< Configurable priority configuration register for RADIO. */
+ __IO uint32_t ECB; /*!< Configurable priority configuration register for ECB. */
+ __IO uint32_t CCM; /*!< Configurable priority configuration register for CCM. */
+ __IO uint32_t AAR; /*!< Configurable priority configuration register for AAR. */
+} AMLI_RAMPRI_Type;
+
+typedef struct {
+ __O uint32_t EN; /*!< Enable channel group. */
+ __O uint32_t DIS; /*!< Disable channel group. */
+} PPI_TASKS_CHG_Type;
+
+typedef struct {
+ __IO uint32_t EEP; /*!< Channel event end-point. */
+ __IO uint32_t TEP; /*!< Channel task end-point. */
+} PPI_CH_Type;
+
+
+/* ================================================================================ */
+/* ================ POWER ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Power Control. (POWER)
+ */
+
+typedef struct { /*!< POWER Structure */
+ __I uint32_t RESERVED0[30];
+ __O uint32_t TASKS_CONSTLAT; /*!< Enable constant latency mode. */
+ __O uint32_t TASKS_LOWPWR; /*!< Enable low power mode (variable latency). */
+ __I uint32_t RESERVED1[34];
+ __IO uint32_t EVENTS_POFWARN; /*!< Power failure warning. */
+ __I uint32_t RESERVED2[126];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[61];
+ __IO uint32_t RESETREAS; /*!< Reset reason. */
+ __I uint32_t RESERVED4[63];
+ __O uint32_t SYSTEMOFF; /*!< System off register. */
+ __I uint32_t RESERVED5[3];
+ __IO uint32_t POFCON; /*!< Power failure configuration. */
+ __I uint32_t RESERVED6[2];
+ __IO uint32_t GPREGRET; /*!< General purpose retention register. This register is a retained
+ register. */
+ __I uint32_t RESERVED7;
+ __IO uint32_t RAMON; /*!< Ram on/off. */
+ __I uint32_t RESERVED8[7];
+ __IO uint32_t RESET; /*!< Pin reset functionality configuration register. This register
+ is a retained register. */
+ __I uint32_t RESERVED9[12];
+ __IO uint32_t DCDCEN; /*!< DCDC converter enable configuration register. */
+} NRF_POWER_Type;
+
+
+/* ================================================================================ */
+/* ================ CLOCK ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Clock control. (CLOCK)
+ */
+
+typedef struct { /*!< CLOCK Structure */
+ __O uint32_t TASKS_HFCLKSTART; /*!< Start HFCLK clock source. */
+ __O uint32_t TASKS_HFCLKSTOP; /*!< Stop HFCLK clock source. */
+ __O uint32_t TASKS_LFCLKSTART; /*!< Start LFCLK clock source. */
+ __O uint32_t TASKS_LFCLKSTOP; /*!< Stop LFCLK clock source. */
+ __O uint32_t TASKS_CAL; /*!< Start calibration of LFCLK RC oscillator. */
+ __O uint32_t TASKS_CTSTART; /*!< Start calibration timer. */
+ __O uint32_t TASKS_CTSTOP; /*!< Stop calibration timer. */
+ __I uint32_t RESERVED0[57];
+ __IO uint32_t EVENTS_HFCLKSTARTED; /*!< HFCLK oscillator started. */
+ __IO uint32_t EVENTS_LFCLKSTARTED; /*!< LFCLK oscillator started. */
+ __I uint32_t RESERVED1;
+ __IO uint32_t EVENTS_DONE; /*!< Callibration of LFCLK RC oscillator completed. */
+ __IO uint32_t EVENTS_CTTO; /*!< Callibration timer timeout. */
+ __I uint32_t RESERVED2[124];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[64];
+ __I uint32_t HFCLKSTAT; /*!< High frequency clock status. */
+ __I uint32_t RESERVED4[2];
+ __I uint32_t LFCLKSTAT; /*!< Low frequency clock status. */
+ __I uint32_t RESERVED5[63];
+ __IO uint32_t LFCLKSRC; /*!< Clock source for the LFCLK clock. */
+ __I uint32_t RESERVED6[7];
+ __IO uint32_t CTIV; /*!< Calibration timer interval. */
+ __I uint32_t RESERVED7[5];
+ __IO uint32_t XTALFREQ; /*!< Crystal frequency. */
+} NRF_CLOCK_Type;
+
+
+/* ================================================================================ */
+/* ================ MPU ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Memory Protection Unit. (MPU)
+ */
+
+typedef struct { /*!< MPU Structure */
+ __I uint32_t RESERVED0[330];
+ __IO uint32_t PERR0; /*!< Configuration of peripherals in mpu regions. */
+ __IO uint32_t RLENR0; /*!< Length of RAM region 0. */
+ __I uint32_t RESERVED1[52];
+ __IO uint32_t PROTENSET0; /*!< Protection bit enable set register for low addresses. */
+ __IO uint32_t PROTENSET1; /*!< Protection bit enable set register for high addresses. */
+ __IO uint32_t DISABLEINDEBUG; /*!< Disable protection mechanism in debug mode. */
+} NRF_MPU_Type;
+
+
+/* ================================================================================ */
+/* ================ PU ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Patch unit. (PU)
+ */
+
+typedef struct { /*!< PU Structure */
+ __I uint32_t RESERVED0[448];
+ __IO uint32_t REPLACEADDR[8]; /*!< Address of first instruction to replace. */
+ __I uint32_t RESERVED1[24];
+ __IO uint32_t PATCHADDR[8]; /*!< Relative address of patch instructions. */
+ __I uint32_t RESERVED2[24];
+ __IO uint32_t PATCHEN; /*!< Patch enable register. */
+ __IO uint32_t PATCHENSET; /*!< Patch enable register. */
+ __IO uint32_t PATCHENCLR; /*!< Patch disable register. */
+} NRF_PU_Type;
+
+
+/* ================================================================================ */
+/* ================ AMLI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief AHB Multi-Layer Interface. (AMLI)
+ */
+
+typedef struct { /*!< AMLI Structure */
+ __I uint32_t RESERVED0[896];
+ AMLI_RAMPRI_Type RAMPRI; /*!< RAM configurable priority configuration structure. */
+} NRF_AMLI_Type;
+
+
+/* ================================================================================ */
+/* ================ RADIO ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief The radio. (RADIO)
+ */
+
+typedef struct { /*!< RADIO Structure */
+ __O uint32_t TASKS_TXEN; /*!< Enable radio in TX mode. */
+ __O uint32_t TASKS_RXEN; /*!< Enable radio in RX mode. */
+ __O uint32_t TASKS_START; /*!< Start radio. */
+ __O uint32_t TASKS_STOP; /*!< Stop radio. */
+ __O uint32_t TASKS_DISABLE; /*!< Disable radio. */
+ __O uint32_t TASKS_RSSISTART; /*!< Start the RSSI and take one sample of the receive signal strength. */
+ __O uint32_t TASKS_RSSISTOP; /*!< Stop the RSSI measurement. */
+ __O uint32_t TASKS_BCSTART; /*!< Start the bit counter. */
+ __O uint32_t TASKS_BCSTOP; /*!< Stop the bit counter. */
+ __I uint32_t RESERVED0[55];
+ __IO uint32_t EVENTS_READY; /*!< Ready event. */
+ __IO uint32_t EVENTS_ADDRESS; /*!< Address event. */
+ __IO uint32_t EVENTS_PAYLOAD; /*!< Payload event. */
+ __IO uint32_t EVENTS_END; /*!< End event. */
+ __IO uint32_t EVENTS_DISABLED; /*!< Disable event. */
+ __IO uint32_t EVENTS_DEVMATCH; /*!< A device address match occurred on the last received packet. */
+ __IO uint32_t EVENTS_DEVMISS; /*!< No device address match occurred on the last received packet. */
+ __IO uint32_t EVENTS_RSSIEND; /*!< Sampling of the receive signal strength complete. A new RSSI
+ sample is ready for readout at the RSSISAMPLE register. */
+ __I uint32_t RESERVED1[2];
+ __IO uint32_t EVENTS_BCMATCH; /*!< Bit counter reached bit count value specified in BC register. */
+ __I uint32_t RESERVED2[53];
+ __IO uint32_t SHORTS; /*!< Shortcut for the radio. */
+ __I uint32_t RESERVED3[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED4[61];
+ __I uint32_t CRCSTATUS; /*!< CRC status of received packet. */
+ __I uint32_t RESERVED5;
+ __I uint32_t RXMATCH; /*!< Received address. */
+ __I uint32_t RXCRC; /*!< Received CRC. */
+ __IO uint32_t DAI; /*!< Device address match index. */
+ __I uint32_t RESERVED6[60];
+ __IO uint32_t PACKETPTR; /*!< Packet pointer. Decision point: START task. */
+ __IO uint32_t FREQUENCY; /*!< Frequency. */
+ __IO uint32_t TXPOWER; /*!< Output power. */
+ __IO uint32_t MODE; /*!< Data rate and modulation. */
+ __IO uint32_t PCNF0; /*!< Packet configuration 0. */
+ __IO uint32_t PCNF1; /*!< Packet configuration 1. */
+ __IO uint32_t BASE0; /*!< Radio base address 0. Decision point: START task. */
+ __IO uint32_t BASE1; /*!< Radio base address 1. Decision point: START task. */
+ __IO uint32_t PREFIX0; /*!< Prefixes bytes for logical addresses 0 to 3. */
+ __IO uint32_t PREFIX1; /*!< Prefixes bytes for logical addresses 4 to 7. */
+ __IO uint32_t TXADDRESS; /*!< Transmit address select. */
+ __IO uint32_t RXADDRESSES; /*!< Receive address select. */
+ __IO uint32_t CRCCNF; /*!< CRC configuration. */
+ __IO uint32_t CRCPOLY; /*!< CRC polynomial. */
+ __IO uint32_t CRCINIT; /*!< CRC initial value. */
+ __IO uint32_t TEST; /*!< Test features enable register. */
+ __IO uint32_t TIFS; /*!< Inter Frame Spacing in microseconds. */
+ __IO uint32_t RSSISAMPLE; /*!< RSSI sample. */
+ __I uint32_t RESERVED7;
+ __I uint32_t STATE; /*!< Current radio state. */
+ __IO uint32_t DATAWHITEIV; /*!< Data whitening initial value. */
+ __I uint32_t RESERVED8[2];
+ __IO uint32_t BCC; /*!< Bit counter compare. */
+ __I uint32_t RESERVED9[39];
+ __IO uint32_t DAB[8]; /*!< Device address base segment. */
+ __IO uint32_t DAP[8]; /*!< Device address prefix. */
+ __IO uint32_t DACNF; /*!< Device address match configuration. */
+ __I uint32_t RESERVED10[56];
+ __IO uint32_t OVERRIDE0; /*!< Trim value override register 0. */
+ __IO uint32_t OVERRIDE1; /*!< Trim value override register 1. */
+ __IO uint32_t OVERRIDE2; /*!< Trim value override register 2. */
+ __IO uint32_t OVERRIDE3; /*!< Trim value override register 3. */
+ __IO uint32_t OVERRIDE4; /*!< Trim value override register 4. */
+ __I uint32_t RESERVED11[561];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_RADIO_Type;
+
+
+/* ================================================================================ */
+/* ================ UART ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Universal Asynchronous Receiver/Transmitter. (UART)
+ */
+
+typedef struct { /*!< UART Structure */
+ __O uint32_t TASKS_STARTRX; /*!< Start UART receiver. */
+ __O uint32_t TASKS_STOPRX; /*!< Stop UART receiver. */
+ __O uint32_t TASKS_STARTTX; /*!< Start UART transmitter. */
+ __O uint32_t TASKS_STOPTX; /*!< Stop UART transmitter. */
+ __I uint32_t RESERVED0[3];
+ __O uint32_t TASKS_SUSPEND; /*!< Suspend UART. */
+ __I uint32_t RESERVED1[56];
+ __IO uint32_t EVENTS_CTS; /*!< CTS activated. */
+ __IO uint32_t EVENTS_NCTS; /*!< CTS deactivated. */
+ __IO uint32_t EVENTS_RXDRDY; /*!< Data received in RXD. */
+ __I uint32_t RESERVED2[4];
+ __IO uint32_t EVENTS_TXDRDY; /*!< Data sent from TXD. */
+ __I uint32_t RESERVED3;
+ __IO uint32_t EVENTS_ERROR; /*!< Error detected. */
+ __I uint32_t RESERVED4[7];
+ __IO uint32_t EVENTS_RXTO; /*!< Receiver timeout. */
+ __I uint32_t RESERVED5[46];
+ __IO uint32_t SHORTS; /*!< Shortcuts for TWI. */
+ __I uint32_t RESERVED6[63];
+ __IO uint32_t INTEN; /*!< Interrupt enable register. */
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED7[93];
+ __IO uint32_t ERRORSRC; /*!< Error source. Write error field to 1 to clear error. */
+ __I uint32_t RESERVED8[31];
+ __IO uint32_t ENABLE; /*!< Enable UART and acquire IOs. */
+ __I uint32_t RESERVED9;
+ __IO uint32_t PSELRTS; /*!< Pin select for RTS. */
+ __IO uint32_t PSELTXD; /*!< Pin select for TXD. */
+ __IO uint32_t PSELCTS; /*!< Pin select for CTS. */
+ __IO uint32_t PSELRXD; /*!< Pin select for RXD. */
+ __I uint32_t RXD; /*!< RXD register. On read action the buffer pointer is displaced.
+ Once read the character is consummed. If read when no character
+ available, the UART will stop working. */
+ __O uint32_t TXD; /*!< TXD register. */
+ __I uint32_t RESERVED10;
+ __IO uint32_t BAUDRATE; /*!< UART Baudrate. */
+ __I uint32_t RESERVED11[17];
+ __IO uint32_t CONFIG; /*!< Configuration of parity and hardware flow control register. */
+ __I uint32_t RESERVED12[675];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_UART_Type;
+
+
+/* ================================================================================ */
+/* ================ SPI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief SPI master 0. (SPI)
+ */
+
+typedef struct { /*!< SPI Structure */
+ __I uint32_t RESERVED0[66];
+ __IO uint32_t EVENTS_READY; /*!< TXD byte sent and RXD byte received. */
+ __I uint32_t RESERVED1[126];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED2[125];
+ __IO uint32_t ENABLE; /*!< Enable SPI. */
+ __I uint32_t RESERVED3;
+ __IO uint32_t PSELSCK; /*!< Pin select for SCK. */
+ __IO uint32_t PSELMOSI; /*!< Pin select for MOSI. */
+ __IO uint32_t PSELMISO; /*!< Pin select for MISO. */
+ __I uint32_t RESERVED4;
+ __IO uint32_t RXD; /*!< RX data. */
+ __IO uint32_t TXD; /*!< TX data. */
+ __I uint32_t RESERVED5;
+ __IO uint32_t FREQUENCY; /*!< SPI frequency */
+ __I uint32_t RESERVED6[11];
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+ __I uint32_t RESERVED7[681];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_SPI_Type;
+
+
+/* ================================================================================ */
+/* ================ TWI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Two-wire interface master 0. (TWI)
+ */
+
+typedef struct { /*!< TWI Structure */
+ __O uint32_t TASKS_STARTRX; /*!< Start 2-Wire master receive sequence. */
+ __I uint32_t RESERVED0;
+ __O uint32_t TASKS_STARTTX; /*!< Start 2-Wire master transmit sequence. */
+ __I uint32_t RESERVED1[2];
+ __O uint32_t TASKS_STOP; /*!< Stop 2-Wire transaction. */
+ __I uint32_t RESERVED2;
+ __O uint32_t TASKS_SUSPEND; /*!< Suspend 2-Wire transaction. */
+ __O uint32_t TASKS_RESUME; /*!< Resume 2-Wire transaction. */
+ __I uint32_t RESERVED3[56];
+ __IO uint32_t EVENTS_STOPPED; /*!< Two-wire stopped. */
+ __IO uint32_t EVENTS_RXDREADY; /*!< Two-wire ready to deliver new RXD byte received. */
+ __I uint32_t RESERVED4[4];
+ __IO uint32_t EVENTS_TXDSENT; /*!< Two-wire finished sending last TXD byte. */
+ __I uint32_t RESERVED5;
+ __IO uint32_t EVENTS_ERROR; /*!< Two-wire error detected. */
+ __I uint32_t RESERVED6[4];
+ __IO uint32_t EVENTS_BB; /*!< Two-wire byte boundary. */
+ __I uint32_t RESERVED7[49];
+ __IO uint32_t SHORTS; /*!< Shortcuts for TWI. */
+ __I uint32_t RESERVED8[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED9[110];
+ __IO uint32_t ERRORSRC; /*!< Two-wire error source. Write error field to 1 to clear error. */
+ __I uint32_t RESERVED10[14];
+ __IO uint32_t ENABLE; /*!< Enable two-wire master. */
+ __I uint32_t RESERVED11;
+ __IO uint32_t PSELSCL; /*!< Pin select for SCL. */
+ __IO uint32_t PSELSDA; /*!< Pin select for SDA. */
+ __I uint32_t RESERVED12[2];
+ __IO uint32_t RXD; /*!< RX data register. */
+ __IO uint32_t TXD; /*!< TX data register. */
+ __I uint32_t RESERVED13;
+ __IO uint32_t FREQUENCY; /*!< Two-wire frequency. */
+ __I uint32_t RESERVED14[24];
+ __IO uint32_t ADDRESS; /*!< Address used in the two-wire transfer. */
+ __I uint32_t RESERVED15[668];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_TWI_Type;
+
+
+/* ================================================================================ */
+/* ================ SPIS ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief SPI slave 1. (SPIS)
+ */
+
+typedef struct { /*!< SPIS Structure */
+ __I uint32_t RESERVED0[9];
+ __O uint32_t TASKS_ACQUIRE; /*!< Acquire SPI semaphore. */
+ __O uint32_t TASKS_RELEASE; /*!< Release SPI semaphore. */
+ __I uint32_t RESERVED1[54];
+ __IO uint32_t EVENTS_END; /*!< Granted transaction completed. */
+ __I uint32_t RESERVED2[8];
+ __IO uint32_t EVENTS_ACQUIRED; /*!< Semaphore acquired. */
+ __I uint32_t RESERVED3[53];
+ __IO uint32_t SHORTS; /*!< Shortcuts for SPIS. */
+ __I uint32_t RESERVED4[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED5[61];
+ __I uint32_t SEMSTAT; /*!< Semaphore status. */
+ __I uint32_t RESERVED6[15];
+ __IO uint32_t STATUS; /*!< Status from last transaction. */
+ __I uint32_t RESERVED7[47];
+ __IO uint32_t ENABLE; /*!< Enable SPIS. */
+ __I uint32_t RESERVED8;
+ __IO uint32_t PSELSCK; /*!< Pin select for SCK. */
+ __IO uint32_t PSELMISO; /*!< Pin select for MISO. */
+ __IO uint32_t PSELMOSI; /*!< Pin select for MOSI. */
+ __IO uint32_t PSELCSN; /*!< Pin select for CSN. */
+ __I uint32_t RESERVED9[7];
+ __IO uint32_t RXDPTR; /*!< RX data pointer. */
+ __IO uint32_t MAXRX; /*!< Maximum number of bytes in the receive buffer. */
+ __IO uint32_t AMOUNTRX; /*!< Number of bytes received in last granted transaction. */
+ __I uint32_t RESERVED10;
+ __IO uint32_t TXDPTR; /*!< TX data pointer. */
+ __IO uint32_t MAXTX; /*!< Maximum number of bytes in the transmit buffer. */
+ __IO uint32_t AMOUNTTX; /*!< Number of bytes transmitted in last granted transaction. */
+ __I uint32_t RESERVED11;
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+ __I uint32_t RESERVED12;
+ __IO uint32_t DEF; /*!< Default character. */
+ __I uint32_t RESERVED13[24];
+ __IO uint32_t ORC; /*!< Over-read character. */
+ __I uint32_t RESERVED14[654];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_SPIS_Type;
+
+
+/* ================================================================================ */
+/* ================ GPIOTE ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief GPIO tasks and events. (GPIOTE)
+ */
+
+typedef struct { /*!< GPIOTE Structure */
+ __O uint32_t TASKS_OUT[4]; /*!< Tasks asssociated with GPIOTE channels. */
+ __I uint32_t RESERVED0[60];
+ __IO uint32_t EVENTS_IN[4]; /*!< Tasks asssociated with GPIOTE channels. */
+ __I uint32_t RESERVED1[27];
+ __IO uint32_t EVENTS_PORT; /*!< Event generated from multiple pins. */
+ __I uint32_t RESERVED2[97];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[129];
+ __IO uint32_t CONFIG[4]; /*!< Channel configuration registers. */
+ __I uint32_t RESERVED4[695];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_GPIOTE_Type;
+
+
+/* ================================================================================ */
+/* ================ ADC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Analog to digital converter. (ADC)
+ */
+
+typedef struct { /*!< ADC Structure */
+ __O uint32_t TASKS_START; /*!< Start an ADC conversion. */
+ __O uint32_t TASKS_STOP; /*!< Stop ADC. */
+ __I uint32_t RESERVED0[62];
+ __IO uint32_t EVENTS_END; /*!< ADC conversion complete. */
+ __I uint32_t RESERVED1[128];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED2[61];
+ __I uint32_t BUSY; /*!< ADC busy register. */
+ __I uint32_t RESERVED3[63];
+ __IO uint32_t ENABLE; /*!< ADC enable. */
+ __IO uint32_t CONFIG; /*!< ADC configuration register. */
+ __I uint32_t RESULT; /*!< Result of ADC conversion. */
+ __I uint32_t RESERVED4[700];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_ADC_Type;
+
+
+/* ================================================================================ */
+/* ================ TIMER ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Timer 0. (TIMER)
+ */
+
+typedef struct { /*!< TIMER Structure */
+ __O uint32_t TASKS_START; /*!< Start Timer. */
+ __O uint32_t TASKS_STOP; /*!< Stop Timer. */
+ __O uint32_t TASKS_COUNT; /*!< Increment Timer (In counter mode). */
+ __O uint32_t TASKS_CLEAR; /*!< Clear timer. */
+ __I uint32_t RESERVED0[12];
+ __O uint32_t TASKS_CAPTURE[4]; /*!< Capture Timer value to CC[n] registers. */
+ __I uint32_t RESERVED1[60];
+ __IO uint32_t EVENTS_COMPARE[4]; /*!< Compare event on CC[n] match. */
+ __I uint32_t RESERVED2[44];
+ __IO uint32_t SHORTS; /*!< Shortcuts for Timer. */
+ __I uint32_t RESERVED3[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED4[126];
+ __IO uint32_t MODE; /*!< Timer Mode selection. */
+ __IO uint32_t BITMODE; /*!< Sets timer behaviour. */
+ __I uint32_t RESERVED5;
+ __IO uint32_t PRESCALER; /*!< 4-bit prescaler to source clock frequency (max value 9). Source
+ clock frequency is divided by 2^SCALE. */
+ __I uint32_t RESERVED6[11];
+ __IO uint32_t CC[4]; /*!< Capture/compare registers. */
+ __I uint32_t RESERVED7[683];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_TIMER_Type;
+
+
+/* ================================================================================ */
+/* ================ RTC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Real time counter 0. (RTC)
+ */
+
+typedef struct { /*!< RTC Structure */
+ __O uint32_t TASKS_START; /*!< Start RTC Counter. */
+ __O uint32_t TASKS_STOP; /*!< Stop RTC Counter. */
+ __O uint32_t TASKS_CLEAR; /*!< Clear RTC Counter. */
+ __O uint32_t TASKS_TRIGOVRFLW; /*!< Set COUNTER to 0xFFFFFFF0. */
+ __I uint32_t RESERVED0[60];
+ __IO uint32_t EVENTS_TICK; /*!< Event on COUNTER increment. */
+ __IO uint32_t EVENTS_OVRFLW; /*!< Event on COUNTER overflow. */
+ __I uint32_t RESERVED1[14];
+ __IO uint32_t EVENTS_COMPARE[4]; /*!< Compare event on CC[n] match. */
+ __I uint32_t RESERVED2[109];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[13];
+ __IO uint32_t EVTEN; /*!< Configures event enable routing to PPI for each RTC event. */
+ __IO uint32_t EVTENSET; /*!< Enable events routing to PPI. The reading of this register gives
+ the value of EVTEN. */
+ __IO uint32_t EVTENCLR; /*!< Disable events routing to PPI. The reading of this register
+ gives the value of EVTEN. */
+ __I uint32_t RESERVED4[110];
+ __IO uint32_t COUNTER; /*!< Current COUNTER value. */
+ __IO uint32_t PRESCALER; /*!< 12-bit prescaler for COUNTER frequency (32768/(PRESCALER+1)).
+ Must be written when RTC is STOPed. */
+ __I uint32_t RESERVED5[13];
+ __IO uint32_t CC[4]; /*!< Capture/compare registers. */
+ __I uint32_t RESERVED6[683];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_RTC_Type;
+
+
+/* ================================================================================ */
+/* ================ TEMP ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Temperature Sensor. (TEMP)
+ */
+
+typedef struct { /*!< TEMP Structure */
+ __O uint32_t TASKS_START; /*!< Start temperature measurement. */
+ __O uint32_t TASKS_STOP; /*!< Stop temperature measurement. */
+ __I uint32_t RESERVED0[62];
+ __IO uint32_t EVENTS_DATARDY; /*!< Temperature measurement complete, data ready event. */
+ __I uint32_t RESERVED1[128];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED2[127];
+ __I int32_t TEMP; /*!< Die temperature in degC, 2's complement format, 0.25 degC pecision. */
+ __I uint32_t RESERVED3[700];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_TEMP_Type;
+
+
+/* ================================================================================ */
+/* ================ RNG ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Random Number Generator. (RNG)
+ */
+
+typedef struct { /*!< RNG Structure */
+ __O uint32_t TASKS_START; /*!< Start the random number generator. */
+ __O uint32_t TASKS_STOP; /*!< Stop the random number generator. */
+ __I uint32_t RESERVED0[62];
+ __IO uint32_t EVENTS_VALRDY; /*!< New random number generated and written to VALUE register. */
+ __I uint32_t RESERVED1[63];
+ __IO uint32_t SHORTS; /*!< Shortcut for the RNG. */
+ __I uint32_t RESERVED2[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register */
+ __I uint32_t RESERVED3[126];
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+ __I uint32_t VALUE; /*!< RNG random number. */
+ __I uint32_t RESERVED4[700];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_RNG_Type;
+
+
+/* ================================================================================ */
+/* ================ ECB ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief AES ECB Mode Encryption. (ECB)
+ */
+
+typedef struct { /*!< ECB Structure */
+ __O uint32_t TASKS_STARTECB; /*!< Start ECB block encrypt. If a crypto operation is running, this
+ will not initiate a new encryption and the ERRORECB event will
+ be triggered. */
+ __O uint32_t TASKS_STOPECB; /*!< Stop current ECB encryption. If a crypto operation is running,
+ this will will trigger the ERRORECB event. */
+ __I uint32_t RESERVED0[62];
+ __IO uint32_t EVENTS_ENDECB; /*!< ECB block encrypt complete. */
+ __IO uint32_t EVENTS_ERRORECB; /*!< ECB block encrypt aborted due to a STOPECB task or due to an
+ error. */
+ __I uint32_t RESERVED1[127];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED2[126];
+ __IO uint32_t ECBDATAPTR; /*!< ECB block encrypt memory pointer. */
+ __I uint32_t RESERVED3[701];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_ECB_Type;
+
+
+/* ================================================================================ */
+/* ================ AAR ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Accelerated Address Resolver. (AAR)
+ */
+
+typedef struct { /*!< AAR Structure */
+ __O uint32_t TASKS_START; /*!< Start resolving addresses based on IRKs specified in the IRK
+ data structure. */
+ __I uint32_t RESERVED0;
+ __O uint32_t TASKS_STOP; /*!< Stop resolving addresses. */
+ __I uint32_t RESERVED1[61];
+ __IO uint32_t EVENTS_END; /*!< Address resolution procedure completed. */
+ __IO uint32_t EVENTS_RESOLVED; /*!< Address resolved. */
+ __IO uint32_t EVENTS_NOTRESOLVED; /*!< Address not resolved. */
+ __I uint32_t RESERVED2[126];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[61];
+ __I uint32_t STATUS; /*!< Resolution status. */
+ __I uint32_t RESERVED4[63];
+ __IO uint32_t ENABLE; /*!< Enable AAR. */
+ __IO uint32_t NIRK; /*!< Number of Identity root Keys in the IRK data structure. */
+ __IO uint32_t IRKPTR; /*!< Pointer to the IRK data structure. */
+ __I uint32_t RESERVED5;
+ __IO uint32_t ADDRPTR; /*!< Pointer to the resolvable address (6 bytes). */
+ __IO uint32_t SCRATCHPTR; /*!< Pointer to "scratch" data area used for temporary storage during
+ resolution. A minimum of 3 bytes must be reserved. */
+ __I uint32_t RESERVED6[697];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_AAR_Type;
+
+
+/* ================================================================================ */
+/* ================ CCM ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief AES CCM Mode Encryption. (CCM)
+ */
+
+typedef struct { /*!< CCM Structure */
+ __O uint32_t TASKS_KSGEN; /*!< Start generation of key-stream. This operation will stop by
+ itself when completed. */
+ __O uint32_t TASKS_CRYPT; /*!< Start encrypt/decrypt. This operation will stop by itself when
+ completed. */
+ __O uint32_t TASKS_STOP; /*!< Stop encrypt/decrypt. */
+ __I uint32_t RESERVED0[61];
+ __IO uint32_t EVENTS_ENDKSGEN; /*!< Keystream generation completed. */
+ __IO uint32_t EVENTS_ENDCRYPT; /*!< Encrypt/decrypt completed. */
+ __IO uint32_t EVENTS_ERROR; /*!< Error happened. */
+ __I uint32_t RESERVED1[61];
+ __IO uint32_t SHORTS; /*!< Shortcut for the CCM. */
+ __I uint32_t RESERVED2[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[61];
+ __I uint32_t MICSTATUS; /*!< CCM RX MIC check result. */
+ __I uint32_t RESERVED4[63];
+ __IO uint32_t ENABLE; /*!< CCM enable. */
+ __IO uint32_t MODE; /*!< Operation mode. */
+ __IO uint32_t CNFPTR; /*!< Pointer to data structure holding AES key and NONCE vector. */
+ __IO uint32_t INPTR; /*!< Pointer to input packet. */
+ __IO uint32_t OUTPTR; /*!< Pointer to output packet. */
+ __IO uint32_t SCRATCHPTR; /*!< Pointer to "scratch" data area used for temporary storage during
+ resolution. A minimum of 43 bytes must be reserved. */
+ __I uint32_t RESERVED5[697];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_CCM_Type;
+
+
+/* ================================================================================ */
+/* ================ WDT ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Watchdog Timer. (WDT)
+ */
+
+typedef struct { /*!< WDT Structure */
+ __O uint32_t TASKS_START; /*!< Start the watchdog. */
+ __I uint32_t RESERVED0[63];
+ __IO uint32_t EVENTS_TIMEOUT; /*!< Watchdog timeout. */
+ __I uint32_t RESERVED1[128];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED2[61];
+ __I uint32_t RUNSTATUS; /*!< Watchdog running status. */
+ __I uint32_t REQSTATUS; /*!< Request status. */
+ __I uint32_t RESERVED3[63];
+ __IO uint32_t CRV; /*!< Counter reload value in number of 32kiHz clock cycles. */
+ __IO uint32_t RREN; /*!< Reload request enable. */
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+ __I uint32_t RESERVED4[60];
+ __O uint32_t RR[8]; /*!< Reload requests registers. */
+ __I uint32_t RESERVED5[631];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_WDT_Type;
+
+
+/* ================================================================================ */
+/* ================ QDEC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Rotary decoder. (QDEC)
+ */
+
+typedef struct { /*!< QDEC Structure */
+ __O uint32_t TASKS_START; /*!< Start the quadrature decoder. */
+ __O uint32_t TASKS_STOP; /*!< Stop the quadrature decoder. */
+ __O uint32_t TASKS_READCLRACC; /*!< Transfers the content from ACC registers to ACCREAD registers,
+ and clears the ACC registers. */
+ __I uint32_t RESERVED0[61];
+ __IO uint32_t EVENTS_SAMPLERDY; /*!< A new sample is written to the sample register. */
+ __IO uint32_t EVENTS_REPORTRDY; /*!< REPORTPER number of samples accumulated in ACC register, and
+ ACC register different than zero. */
+ __IO uint32_t EVENTS_ACCOF; /*!< ACC or ACCDBL register overflow. */
+ __I uint32_t RESERVED1[61];
+ __IO uint32_t SHORTS; /*!< Shortcut for the QDEC. */
+ __I uint32_t RESERVED2[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[125];
+ __IO uint32_t ENABLE; /*!< Enable the QDEC. */
+ __IO uint32_t LEDPOL; /*!< LED output pin polarity. */
+ __IO uint32_t SAMPLEPER; /*!< Sample period. */
+ __I int32_t SAMPLE; /*!< Motion sample value. */
+ __IO uint32_t REPORTPER; /*!< Number of samples to generate an EVENT_REPORTRDY. */
+ __I int32_t ACC; /*!< Accumulated valid transitions register. */
+ __I int32_t ACCREAD; /*!< Snapshot of ACC register. Value generated by the TASKS_READCLEACC
+ task. */
+ __IO uint32_t PSELLED; /*!< Pin select for LED output. */
+ __IO uint32_t PSELA; /*!< Pin select for phase A input. */
+ __IO uint32_t PSELB; /*!< Pin select for phase B input. */
+ __IO uint32_t DBFEN; /*!< Enable debouncer input filters. */
+ __I uint32_t RESERVED4[5];
+ __IO uint32_t LEDPRE; /*!< Time LED is switched ON before the sample. */
+ __I uint32_t ACCDBL; /*!< Accumulated double (error) transitions register. */
+ __I uint32_t ACCDBLREAD; /*!< Snapshot of ACCDBL register. Value generated by the TASKS_READCLEACC
+ task. */
+ __I uint32_t RESERVED5[684];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_QDEC_Type;
+
+
+/* ================================================================================ */
+/* ================ LPCOMP ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Wakeup Comparator. (LPCOMP)
+ */
+
+typedef struct { /*!< LPCOMP Structure */
+ __O uint32_t TASKS_START; /*!< Start the comparator. */
+ __O uint32_t TASKS_STOP; /*!< Stop the comparator. */
+ __O uint32_t TASKS_SAMPLE; /*!< Sample comparator value. */
+ __I uint32_t RESERVED0[61];
+ __IO uint32_t EVENTS_READY; /*!< LPCOMP is ready and output is valid. */
+ __IO uint32_t EVENTS_DOWN; /*!< Input voltage crossed the threshold going down. */
+ __IO uint32_t EVENTS_UP; /*!< Input voltage crossed the threshold going up. */
+ __IO uint32_t EVENTS_CROSS; /*!< Input voltage crossed the threshold in any direction. */
+ __I uint32_t RESERVED1[60];
+ __IO uint32_t SHORTS; /*!< Shortcut for the LPCOMP. */
+ __I uint32_t RESERVED2[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[61];
+ __I uint32_t RESULT; /*!< Result of last compare. */
+ __I uint32_t RESERVED4[63];
+ __IO uint32_t ENABLE; /*!< Enable the LPCOMP. */
+ __IO uint32_t PSEL; /*!< Input pin select. */
+ __IO uint32_t REFSEL; /*!< Reference select. */
+ __IO uint32_t EXTREFSEL; /*!< External reference select. */
+ __I uint32_t RESERVED5[4];
+ __IO uint32_t ANADETECT; /*!< Analog detect configuration. */
+ __I uint32_t RESERVED6[694];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_LPCOMP_Type;
+
+
+/* ================================================================================ */
+/* ================ COMP ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Comparator. (COMP)
+ */
+
+typedef struct { /*!< COMP Structure */
+ __O uint32_t TASKS_START; /*!< Start the comparator. */
+ __O uint32_t TASKS_STOP; /*!< Stop the comparator. */
+ __O uint32_t TASKS_SAMPLE; /*!< Sample comparator value. */
+ __I uint32_t RESERVED0[61];
+ __IO uint32_t EVENTS_READY; /*!< COMP is ready and output is valid. */
+ __IO uint32_t EVENTS_DOWN; /*!< Input voltage crossed the threshold going down. */
+ __IO uint32_t EVENTS_UP; /*!< Input voltage crossed the threshold going up. */
+ __IO uint32_t EVENTS_CROSS; /*!< Input voltage crossed the threshold in any direction. */
+ __I uint32_t RESERVED1[60];
+ __IO uint32_t SHORTS; /*!< Shortcut for the COMP. */
+ __I uint32_t RESERVED2[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[61];
+ __I uint32_t RESULT; /*!< Compare result. */
+ __I uint32_t RESERVED4[63];
+ __IO uint32_t ENABLE; /*!< Enable the COMP. */
+ __IO uint32_t PSEL; /*!< Input pin select. */
+ __IO uint32_t REFSEL; /*!< Reference select. */
+ __IO uint32_t EXTREFSEL; /*!< External reference select. */
+ __I uint32_t RESERVED5[8];
+ __IO uint32_t TH; /*!< Threshold configuration for hysteresis unit. */
+ __IO uint32_t MODE; /*!< Mode configuration. */
+ __I uint32_t RESERVED6[689];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_COMP_Type;
+
+
+/* ================================================================================ */
+/* ================ SWI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief SW Interrupts. (SWI)
+ */
+
+typedef struct { /*!< SWI Structure */
+ __I uint32_t UNUSED; /*!< Unused. */
+} NRF_SWI_Type;
+
+
+/* ================================================================================ */
+/* ================ NVMC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Non Volatile Memory Controller. (NVMC)
+ */
+
+typedef struct { /*!< NVMC Structure */
+ __I uint32_t RESERVED0[256];
+ __I uint32_t READY; /*!< Ready flag. */
+ __I uint32_t RESERVED1[64];
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+ __IO uint32_t ERASEPAGE; /*!< Register for erasing a non-protected non-volatile memory page. */
+ __IO uint32_t ERASEALL; /*!< Register for erasing all non-volatile user memory. */
+ __IO uint32_t ERASEPROTECTEDPAGE; /*!< Register for erasing a protected non-volatile memory page. */
+ __IO uint32_t ERASEUICR; /*!< Register for start erasing User Information Congfiguration Registers. */
+} NRF_NVMC_Type;
+
+
+/* ================================================================================ */
+/* ================ PPI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief PPI controller. (PPI)
+ */
+
+typedef struct { /*!< PPI Structure */
+ PPI_TASKS_CHG_Type TASKS_CHG[4]; /*!< Channel group tasks. */
+ __I uint32_t RESERVED0[312];
+ __IO uint32_t CHEN; /*!< Channel enable. */
+ __IO uint32_t CHENSET; /*!< Channel enable set. */
+ __IO uint32_t CHENCLR; /*!< Channel enable clear. */
+ __I uint32_t RESERVED1;
+ PPI_CH_Type CH[16]; /*!< PPI Channel. */
+ __I uint32_t RESERVED2[156];
+ __IO uint32_t CHG[4]; /*!< Channel group configuration. */
+} NRF_PPI_Type;
+
+
+/* ================================================================================ */
+/* ================ FICR ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Factory Information Configuration. (FICR)
+ */
+
+typedef struct { /*!< FICR Structure */
+ __I uint32_t RESERVED0[4];
+ __I uint32_t CODEPAGESIZE; /*!< Code memory page size in bytes. */
+ __I uint32_t CODESIZE; /*!< Code memory size in pages. */
+ __I uint32_t RESERVED1[4];
+ __I uint32_t CLENR0; /*!< Length of code region 0 in bytes. */
+ __I uint32_t PPFC; /*!< Pre-programmed factory code present. */
+ __I uint32_t RESERVED2;
+ __I uint32_t NUMRAMBLOCK; /*!< Number of individualy controllable RAM blocks. */
+ __I uint32_t SIZERAMBLOCK[4]; /*!< Size of RAM block in bytes. */
+ __I uint32_t RESERVED3[5];
+ __I uint32_t CONFIGID; /*!< Configuration identifier. */
+ __I uint32_t DEVICEID[2]; /*!< Device identifier. */
+ __I uint32_t RESERVED4[6];
+ __I uint32_t ER[4]; /*!< Encryption root. */
+ __I uint32_t IR[4]; /*!< Identity root. */
+ __I uint32_t DEVICEADDRTYPE; /*!< Device address type. */
+ __I uint32_t DEVICEADDR[2]; /*!< Device address. */
+ __I uint32_t OVERRIDEEN; /*!< Radio calibration override enable. */
+ __I uint32_t RESERVED5[15];
+ __I uint32_t BLE_1MBIT[5]; /*!< Override values for the OVERRIDEn registers in RADIO for BLE_1Mbit
+ mode. */
+} NRF_FICR_Type;
+
+
+/* ================================================================================ */
+/* ================ UICR ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief User Information Configuration. (UICR)
+ */
+
+typedef struct { /*!< UICR Structure */
+ __IO uint32_t CLENR0; /*!< Length of code region 0. */
+ __IO uint32_t RBPCONF; /*!< Readback protection configuration. */
+ __IO uint32_t XTALFREQ; /*!< Reset value for CLOCK XTALFREQ register. */
+ __I uint32_t RESERVED0;
+ __I uint32_t FWID; /*!< Firmware ID. */
+ __IO uint32_t BOOTLOADERADDR; /*!< Bootloader start address. */
+} NRF_UICR_Type;
+
+
+/* ================================================================================ */
+/* ================ GPIO ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief General purpose input and output. (GPIO)
+ */
+
+typedef struct { /*!< GPIO Structure */
+ __I uint32_t RESERVED0[321];
+ __IO uint32_t OUT; /*!< Write GPIO port. */
+ __IO uint32_t OUTSET; /*!< Set individual bits in GPIO port. */
+ __IO uint32_t OUTCLR; /*!< Clear individual bits in GPIO port. */
+ __I uint32_t IN; /*!< Read GPIO port. */
+ __IO uint32_t DIR; /*!< Direction of GPIO pins. */
+ __IO uint32_t DIRSET; /*!< DIR set register. */
+ __IO uint32_t DIRCLR; /*!< DIR clear register. */
+ __I uint32_t RESERVED1[120];
+ __IO uint32_t PIN_CNF[32]; /*!< Configuration of GPIO pins. */
+} NRF_GPIO_Type;
+
+
+/* -------------------- End of section using anonymous unions ------------------- */
+#if defined(__CC_ARM)
+ #pragma pop
+#elif defined(__ICCARM__)
+ /* leave anonymous unions enabled */
+#elif defined(__GNUC__)
+ /* anonymous unions are enabled by default */
+#elif defined(__TMS470__)
+ /* anonymous unions are enabled by default */
+#elif defined(__TASKING__)
+ #pragma warning restore
+#else
+ #warning Not supported compiler type
+#endif
+
+
+
+
+/* ================================================================================ */
+/* ================ Peripheral memory map ================ */
+/* ================================================================================ */
+
+#define NRF_POWER_BASE 0x40000000UL
+#define NRF_CLOCK_BASE 0x40000000UL
+#define NRF_MPU_BASE 0x40000000UL
+#define NRF_PU_BASE 0x40000000UL
+#define NRF_AMLI_BASE 0x40000000UL
+#define NRF_RADIO_BASE 0x40001000UL
+#define NRF_UART0_BASE 0x40002000UL
+#define NRF_SPI0_BASE 0x40003000UL
+#define NRF_TWI0_BASE 0x40003000UL
+#define NRF_SPI1_BASE 0x40004000UL
+#define NRF_TWI1_BASE 0x40004000UL
+#define NRF_SPIS1_BASE 0x40004000UL
+#define NRF_GPIOTE_BASE 0x40006000UL
+#define NRF_ADC_BASE 0x40007000UL
+#define NRF_TIMER0_BASE 0x40008000UL
+#define NRF_TIMER1_BASE 0x40009000UL
+#define NRF_TIMER2_BASE 0x4000A000UL
+#define NRF_RTC0_BASE 0x4000B000UL
+#define NRF_TEMP_BASE 0x4000C000UL
+#define NRF_RNG_BASE 0x4000D000UL
+#define NRF_ECB_BASE 0x4000E000UL
+#define NRF_AAR_BASE 0x4000F000UL
+#define NRF_CCM_BASE 0x4000F000UL
+#define NRF_WDT_BASE 0x40010000UL
+#define NRF_RTC1_BASE 0x40011000UL
+#define NRF_QDEC_BASE 0x40012000UL
+#define NRF_LPCOMP_BASE 0x40013000UL
+#define NRF_COMP_BASE 0x40013000UL
+#define NRF_SWI_BASE 0x40014000UL
+#define NRF_NVMC_BASE 0x4001E000UL
+#define NRF_PPI_BASE 0x4001F000UL
+#define NRF_FICR_BASE 0x10000000UL
+#define NRF_UICR_BASE 0x10001000UL
+#define NRF_GPIO_BASE 0x50000000UL
+
+
+/* ================================================================================ */
+/* ================ Peripheral declaration ================ */
+/* ================================================================================ */
+
+#define NRF_POWER ((NRF_POWER_Type *) NRF_POWER_BASE)
+#define NRF_CLOCK ((NRF_CLOCK_Type *) NRF_CLOCK_BASE)
+#define NRF_MPU ((NRF_MPU_Type *) NRF_MPU_BASE)
+#define NRF_PU ((NRF_PU_Type *) NRF_PU_BASE)
+#define NRF_AMLI ((NRF_AMLI_Type *) NRF_AMLI_BASE)
+#define NRF_RADIO ((NRF_RADIO_Type *) NRF_RADIO_BASE)
+#define NRF_UART0 ((NRF_UART_Type *) NRF_UART0_BASE)
+#define NRF_SPI0 ((NRF_SPI_Type *) NRF_SPI0_BASE)
+#define NRF_TWI0 ((NRF_TWI_Type *) NRF_TWI0_BASE)
+#define NRF_SPI1 ((NRF_SPI_Type *) NRF_SPI1_BASE)
+#define NRF_TWI1 ((NRF_TWI_Type *) NRF_TWI1_BASE)
+#define NRF_SPIS1 ((NRF_SPIS_Type *) NRF_SPIS1_BASE)
+#define NRF_GPIOTE ((NRF_GPIOTE_Type *) NRF_GPIOTE_BASE)
+#define NRF_ADC ((NRF_ADC_Type *) NRF_ADC_BASE)
+#define NRF_TIMER0 ((NRF_TIMER_Type *) NRF_TIMER0_BASE)
+#define NRF_TIMER1 ((NRF_TIMER_Type *) NRF_TIMER1_BASE)
+#define NRF_TIMER2 ((NRF_TIMER_Type *) NRF_TIMER2_BASE)
+#define NRF_RTC0 ((NRF_RTC_Type *) NRF_RTC0_BASE)
+#define NRF_TEMP ((NRF_TEMP_Type *) NRF_TEMP_BASE)
+#define NRF_RNG ((NRF_RNG_Type *) NRF_RNG_BASE)
+#define NRF_ECB ((NRF_ECB_Type *) NRF_ECB_BASE)
+#define NRF_AAR ((NRF_AAR_Type *) NRF_AAR_BASE)
+#define NRF_CCM ((NRF_CCM_Type *) NRF_CCM_BASE)
+#define NRF_WDT ((NRF_WDT_Type *) NRF_WDT_BASE)
+#define NRF_RTC1 ((NRF_RTC_Type *) NRF_RTC1_BASE)
+#define NRF_QDEC ((NRF_QDEC_Type *) NRF_QDEC_BASE)
+#define NRF_LPCOMP ((NRF_LPCOMP_Type *) NRF_LPCOMP_BASE)
+#define NRF_COMP ((NRF_COMP_Type *) NRF_COMP_BASE)
+#define NRF_SWI ((NRF_SWI_Type *) NRF_SWI_BASE)
+#define NRF_NVMC ((NRF_NVMC_Type *) NRF_NVMC_BASE)
+#define NRF_PPI ((NRF_PPI_Type *) NRF_PPI_BASE)
+#define NRF_FICR ((NRF_FICR_Type *) NRF_FICR_BASE)
+#define NRF_UICR ((NRF_UICR_Type *) NRF_UICR_BASE)
+#define NRF_GPIO ((NRF_GPIO_Type *) NRF_GPIO_BASE)
+
+
+/** @} */ /* End of group Device_Peripheral_Registers */
+/** @} */ /* End of group nRF51 */
+/** @} */ /* End of group Nordic Semiconductor */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* nRF51_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_BLE_SMURFS/nrf51822.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,27 @@ +/* mbed Microcontroller Library + + * Copyright (c) 2013 Nordic Semiconductor. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + + +#ifndef NRF_H +#define NRF_H + +#include "nordic_global.h" +#include "compiler_abstraction.h" +#include "nrf51.h" +#include "nrf51_bitfields.h" +#endif /* NRF_H */ +
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_BLE_SMURFS/nrf51_bitfields.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,6461 @@ +/* Copyright (c) 2009 Nordic Semiconductor. All Rights Reserved. + * + * The information contained herein is property of Nordic Semiconductor ASA. + * Terms and conditions of usage are described in detail in NORDIC + * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT. + * + * Licensees are granted free, non-transferable use of the information. NO + * WARRANTY of ANY KIND is provided. This heading must NOT be removed from + * the file. + * + */ + + +#ifndef __NRF51_BITS_H +#define __NRF51_BITS_H + +/*lint ++flb "Enter library region */ + +//#include <core_cm0.h> + +/* Peripheral: AAR */ +/* Description: Accelerated Address Resolver. */ + +/* Register: AAR_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 2 : Enable interrupt on NOTRESOLVED event. */ +#define AAR_INTENSET_NOTRESOLVED_Pos (2UL) /*!< Position of NOTRESOLVED field. */ +#define AAR_INTENSET_NOTRESOLVED_Msk (0x1UL << AAR_INTENSET_NOTRESOLVED_Pos) /*!< Bit mask of NOTRESOLVED field. */ +#define AAR_INTENSET_NOTRESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENSET_NOTRESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENSET_NOTRESOLVED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on RESOLVED event. */ +#define AAR_INTENSET_RESOLVED_Pos (1UL) /*!< Position of RESOLVED field. */ +#define AAR_INTENSET_RESOLVED_Msk (0x1UL << AAR_INTENSET_RESOLVED_Pos) /*!< Bit mask of RESOLVED field. */ +#define AAR_INTENSET_RESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENSET_RESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENSET_RESOLVED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on END event. */ +#define AAR_INTENSET_END_Pos (0UL) /*!< Position of END field. */ +#define AAR_INTENSET_END_Msk (0x1UL << AAR_INTENSET_END_Pos) /*!< Bit mask of END field. */ +#define AAR_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: AAR_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 2 : Disable interrupt on NOTRESOLVED event. */ +#define AAR_INTENCLR_NOTRESOLVED_Pos (2UL) /*!< Position of NOTRESOLVED field. */ +#define AAR_INTENCLR_NOTRESOLVED_Msk (0x1UL << AAR_INTENCLR_NOTRESOLVED_Pos) /*!< Bit mask of NOTRESOLVED field. */ +#define AAR_INTENCLR_NOTRESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENCLR_NOTRESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENCLR_NOTRESOLVED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on RESOLVED event. */ +#define AAR_INTENCLR_RESOLVED_Pos (1UL) /*!< Position of RESOLVED field. */ +#define AAR_INTENCLR_RESOLVED_Msk (0x1UL << AAR_INTENCLR_RESOLVED_Pos) /*!< Bit mask of RESOLVED field. */ +#define AAR_INTENCLR_RESOLVED_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENCLR_RESOLVED_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENCLR_RESOLVED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on ENDKSGEN event. */ +#define AAR_INTENCLR_END_Pos (0UL) /*!< Position of END field. */ +#define AAR_INTENCLR_END_Msk (0x1UL << AAR_INTENCLR_END_Pos) /*!< Bit mask of END field. */ +#define AAR_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define AAR_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define AAR_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: AAR_STATUS */ +/* Description: Resolution status. */ + +/* Bits 3..0 : The IRK used last time an address was resolved. */ +#define AAR_STATUS_STATUS_Pos (0UL) /*!< Position of STATUS field. */ +#define AAR_STATUS_STATUS_Msk (0xFUL << AAR_STATUS_STATUS_Pos) /*!< Bit mask of STATUS field. */ + +/* Register: AAR_ENABLE */ +/* Description: Enable AAR. */ + +/* Bits 1..0 : Enable AAR. */ +#define AAR_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define AAR_ENABLE_ENABLE_Msk (0x3UL << AAR_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define AAR_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled AAR. */ +#define AAR_ENABLE_ENABLE_Enabled (0x03UL) /*!< Enable AAR. */ + +/* Register: AAR_NIRK */ +/* Description: Number of Identity root Keys in the IRK data structure. */ + +/* Bits 4..0 : Number of Identity root Keys in the IRK data structure. */ +#define AAR_NIRK_NIRK_Pos (0UL) /*!< Position of NIRK field. */ +#define AAR_NIRK_NIRK_Msk (0x1FUL << AAR_NIRK_NIRK_Pos) /*!< Bit mask of NIRK field. */ + +/* Register: AAR_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define AAR_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define AAR_POWER_POWER_Msk (0x1UL << AAR_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define AAR_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define AAR_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: ADC */ +/* Description: Analog to digital converter. */ + +/* Register: ADC_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 0 : Enable interrupt on END event. */ +#define ADC_INTENSET_END_Pos (0UL) /*!< Position of END field. */ +#define ADC_INTENSET_END_Msk (0x1UL << ADC_INTENSET_END_Pos) /*!< Bit mask of END field. */ +#define ADC_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define ADC_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define ADC_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: ADC_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 0 : Disable interrupt on END event. */ +#define ADC_INTENCLR_END_Pos (0UL) /*!< Position of END field. */ +#define ADC_INTENCLR_END_Msk (0x1UL << ADC_INTENCLR_END_Pos) /*!< Bit mask of END field. */ +#define ADC_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define ADC_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define ADC_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: ADC_BUSY */ +/* Description: ADC busy register. */ + +/* Bit 0 : ADC busy register. */ +#define ADC_BUSY_BUSY_Pos (0UL) /*!< Position of BUSY field. */ +#define ADC_BUSY_BUSY_Msk (0x1UL << ADC_BUSY_BUSY_Pos) /*!< Bit mask of BUSY field. */ +#define ADC_BUSY_BUSY_Ready (0UL) /*!< No ongoing ADC conversion is taking place. ADC is ready. */ +#define ADC_BUSY_BUSY_Busy (1UL) /*!< An ADC conversion is taking place. ADC is busy. */ + +/* Register: ADC_ENABLE */ +/* Description: ADC enable. */ + +/* Bits 1..0 : ADC enable. */ +#define ADC_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define ADC_ENABLE_ENABLE_Msk (0x3UL << ADC_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define ADC_ENABLE_ENABLE_Disabled (0x00UL) /*!< ADC is disabled. */ +#define ADC_ENABLE_ENABLE_Enabled (0x01UL) /*!< ADC is enabled. If an analog input pin is selected as source of the conversion, the selected pin is configured as an analog input. */ + +/* Register: ADC_CONFIG */ +/* Description: ADC configuration register. */ + +/* Bits 17..16 : ADC external reference pin selection. */ +#define ADC_CONFIG_EXTREFSEL_Pos (16UL) /*!< Position of EXTREFSEL field. */ +#define ADC_CONFIG_EXTREFSEL_Msk (0x3UL << ADC_CONFIG_EXTREFSEL_Pos) /*!< Bit mask of EXTREFSEL field. */ +#define ADC_CONFIG_EXTREFSEL_None (0UL) /*!< Analog external reference inputs disabled. */ +#define ADC_CONFIG_EXTREFSEL_AnalogReference0 (1UL) /*!< Use analog reference 0 as reference. */ +#define ADC_CONFIG_EXTREFSEL_AnalogReference1 (2UL) /*!< Use analog reference 1 as reference. */ + +/* Bits 15..8 : ADC analog pin selection. */ +#define ADC_CONFIG_PSEL_Pos (8UL) /*!< Position of PSEL field. */ +#define ADC_CONFIG_PSEL_Msk (0xFFUL << ADC_CONFIG_PSEL_Pos) /*!< Bit mask of PSEL field. */ +#define ADC_CONFIG_PSEL_Disabled (0UL) /*!< Analog input pins disabled. */ +#define ADC_CONFIG_PSEL_AnalogInput0 (1UL) /*!< Use analog input 0 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput1 (2UL) /*!< Use analog input 1 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput2 (4UL) /*!< Use analog input 2 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput3 (8UL) /*!< Use analog input 3 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput4 (16UL) /*!< Use analog input 4 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput5 (32UL) /*!< Use analog input 5 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput6 (64UL) /*!< Use analog input 6 as analog input. */ +#define ADC_CONFIG_PSEL_AnalogInput7 (128UL) /*!< Use analog input 7 as analog input. */ + +/* Bits 6..5 : ADC reference selection. */ +#define ADC_CONFIG_REFSEL_Pos (5UL) /*!< Position of REFSEL field. */ +#define ADC_CONFIG_REFSEL_Msk (0x3UL << ADC_CONFIG_REFSEL_Pos) /*!< Bit mask of REFSEL field. */ +#define ADC_CONFIG_REFSEL_VBG (0x00UL) /*!< Use internal 1.2V bandgap voltage as reference for conversion. */ +#define ADC_CONFIG_REFSEL_External (0x01UL) /*!< Use external source configured by EXTREFSEL as reference for conversion. */ +#define ADC_CONFIG_REFSEL_SupplyOneHalfPrescaling (0x02UL) /*!< Use supply voltage with 1/2 prescaling as reference for conversion. Only usable when supply voltage is between 1.7V and 2.6V. */ +#define ADC_CONFIG_REFSEL_SupplyOneThirdPrescaling (0x03UL) /*!< Use supply voltage with 1/3 prescaling as reference for conversion. Only usable when supply voltage is between 2.5V and 3.6V. */ + +/* Bits 4..2 : ADC input selection. */ +#define ADC_CONFIG_INPSEL_Pos (2UL) /*!< Position of INPSEL field. */ +#define ADC_CONFIG_INPSEL_Msk (0x7UL << ADC_CONFIG_INPSEL_Pos) /*!< Bit mask of INPSEL field. */ +#define ADC_CONFIG_INPSEL_AnalogInputNoPrescaling (0x00UL) /*!< Analog input specified by PSEL with no prescaling used as input for the conversion. */ +#define ADC_CONFIG_INPSEL_AnalogInputTwoThirdsPrescaling (0x01UL) /*!< Analog input specified by PSEL with 2/3 prescaling used as input for the conversion. */ +#define ADC_CONFIG_INPSEL_AnalogInputOneThirdPrescaling (0x02UL) /*!< Analog input specified by PSEL with 1/3 prescaling used as input for the conversion. */ +#define ADC_CONFIG_INPSEL_SupplyTwoThirdsPrescaling (0x05UL) /*!< Supply voltage with 2/3 prescaling used as input for the conversion. */ +#define ADC_CONFIG_INPSEL_SupplyOneThirdPrescaling (0x06UL) /*!< Supply voltage with 1/3 prescaling used as input for the conversion. */ + +/* Bits 1..0 : ADC resolution. */ +#define ADC_CONFIG_RES_Pos (0UL) /*!< Position of RES field. */ +#define ADC_CONFIG_RES_Msk (0x3UL << ADC_CONFIG_RES_Pos) /*!< Bit mask of RES field. */ +#define ADC_CONFIG_RES_8bit (0x00UL) /*!< 8bit ADC resolution. */ +#define ADC_CONFIG_RES_9bit (0x01UL) /*!< 9bit ADC resolution. */ +#define ADC_CONFIG_RES_10bit (0x02UL) /*!< 10bit ADC resolution. */ + +/* Register: ADC_RESULT */ +/* Description: Result of ADC conversion. */ + +/* Bits 9..0 : Result of ADC conversion. */ +#define ADC_RESULT_RESULT_Pos (0UL) /*!< Position of RESULT field. */ +#define ADC_RESULT_RESULT_Msk (0x3FFUL << ADC_RESULT_RESULT_Pos) /*!< Bit mask of RESULT field. */ + +/* Register: ADC_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define ADC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define ADC_POWER_POWER_Msk (0x1UL << ADC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define ADC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define ADC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: AMLI */ +/* Description: AHB Multi-Layer Interface. */ + +/* Register: AMLI_RAMPRI_CPU0 */ +/* Description: Configurable priority configuration register for CPU0. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_CPU0_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_CPU0_RAM3_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM3_Pos) /*!< Bit mask of RAM3 field. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_CPU0_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_CPU0_RAM2_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM2_Pos) /*!< Bit mask of RAM2 field. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_CPU0_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_CPU0_RAM1_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM1_Pos) /*!< Bit mask of RAM1 field. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_CPU0_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_CPU0_RAM0_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM0_Pos) /*!< Bit mask of RAM0 field. */ + +/* Register: AMLI_RAMPRI_SPIS1 */ +/* Description: Configurable priority configuration register for SPIS1. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_SPIS1_RAM3_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM3_Pos) /*!< Bit mask of RAM3 field. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_SPIS1_RAM2_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM2_Pos) /*!< Bit mask of RAM2 field. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_SPIS1_RAM1_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM1_Pos) /*!< Bit mask of RAM1 field. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_SPIS1_RAM0_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM0_Pos) /*!< Bit mask of RAM0 field. */ + +/* Register: AMLI_RAMPRI_RADIO */ +/* Description: Configurable priority configuration register for RADIO. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_RADIO_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_RADIO_RAM3_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM3_Pos) /*!< Bit mask of RAM3 field. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_RADIO_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_RADIO_RAM2_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM2_Pos) /*!< Bit mask of RAM2 field. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_RADIO_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_RADIO_RAM1_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM1_Pos) /*!< Bit mask of RAM1 field. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_RADIO_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_RADIO_RAM0_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM0_Pos) /*!< Bit mask of RAM0 field. */ + +/* Register: AMLI_RAMPRI_ECB */ +/* Description: Configurable priority configuration register for ECB. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_ECB_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_ECB_RAM3_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM3_Pos) /*!< Bit mask of RAM3 field. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_ECB_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_ECB_RAM2_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM2_Pos) /*!< Bit mask of RAM2 field. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_ECB_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_ECB_RAM1_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM1_Pos) /*!< Bit mask of RAM1 field. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_ECB_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_ECB_RAM0_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM0_Pos) /*!< Bit mask of RAM0 field. */ + +/* Register: AMLI_RAMPRI_CCM */ +/* Description: Configurable priority configuration register for CCM. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_CCM_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_CCM_RAM3_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM3_Pos) /*!< Bit mask of RAM3 field. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_CCM_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_CCM_RAM2_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM2_Pos) /*!< Bit mask of RAM2 field. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_CCM_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_CCM_RAM1_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM1_Pos) /*!< Bit mask of RAM1 field. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_CCM_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_CCM_RAM0_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM0_Pos) /*!< Bit mask of RAM0 field. */ + +/* Register: AMLI_RAMPRI_AAR */ +/* Description: Configurable priority configuration register for AAR. */ + +/* Bits 15..12 : Configuration field for RAM block 3. */ +#define AMLI_RAMPRI_AAR_RAM3_Pos (12UL) /*!< Position of RAM3 field. */ +#define AMLI_RAMPRI_AAR_RAM3_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM3_Pos) /*!< Bit mask of RAM3 field. */ + +/* Bits 11..8 : Configuration field for RAM block 2. */ +#define AMLI_RAMPRI_AAR_RAM2_Pos (8UL) /*!< Position of RAM2 field. */ +#define AMLI_RAMPRI_AAR_RAM2_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM2_Pos) /*!< Bit mask of RAM2 field. */ + +/* Bits 7..4 : Configuration field for RAM block 1. */ +#define AMLI_RAMPRI_AAR_RAM1_Pos (4UL) /*!< Position of RAM1 field. */ +#define AMLI_RAMPRI_AAR_RAM1_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM1_Pos) /*!< Bit mask of RAM1 field. */ + +/* Bits 3..0 : Configuration field for RAM block 0. */ +#define AMLI_RAMPRI_AAR_RAM0_Pos (0UL) /*!< Position of RAM0 field. */ +#define AMLI_RAMPRI_AAR_RAM0_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM0_Pos) /*!< Bit mask of RAM0 field. */ + +/* Peripheral: CCM */ +/* Description: AES CCM Mode Encryption. */ + +/* Register: CCM_SHORTS */ +/* Description: Shortcut for the CCM. */ + +/* Bit 0 : Short-cut between ENDKSGEN event and CRYPT task. */ +#define CCM_SHORTS_ENDKSGEN_CRYPT_Pos (0UL) /*!< Position of ENDKSGEN_CRYPT field. */ +#define CCM_SHORTS_ENDKSGEN_CRYPT_Msk (0x1UL << CCM_SHORTS_ENDKSGEN_CRYPT_Pos) /*!< Bit mask of ENDKSGEN_CRYPT field. */ +#define CCM_SHORTS_ENDKSGEN_CRYPT_Disabled (0UL) /*!< Shortcut disabled. */ +#define CCM_SHORTS_ENDKSGEN_CRYPT_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: CCM_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 2 : Enable interrupt on ERROR event. */ +#define CCM_INTENSET_ERROR_Pos (2UL) /*!< Position of ERROR field. */ +#define CCM_INTENSET_ERROR_Msk (0x1UL << CCM_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */ +#define CCM_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on ENDCRYPT event. */ +#define CCM_INTENSET_ENDCRYPT_Pos (1UL) /*!< Position of ENDCRYPT field. */ +#define CCM_INTENSET_ENDCRYPT_Msk (0x1UL << CCM_INTENSET_ENDCRYPT_Pos) /*!< Bit mask of ENDCRYPT field. */ +#define CCM_INTENSET_ENDCRYPT_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENSET_ENDCRYPT_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENSET_ENDCRYPT_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on ENDKSGEN event. */ +#define CCM_INTENSET_ENDKSGEN_Pos (0UL) /*!< Position of ENDKSGEN field. */ +#define CCM_INTENSET_ENDKSGEN_Msk (0x1UL << CCM_INTENSET_ENDKSGEN_Pos) /*!< Bit mask of ENDKSGEN field. */ +#define CCM_INTENSET_ENDKSGEN_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENSET_ENDKSGEN_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENSET_ENDKSGEN_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: CCM_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 2 : Disable interrupt on ERROR event. */ +#define CCM_INTENCLR_ERROR_Pos (2UL) /*!< Position of ERROR field. */ +#define CCM_INTENCLR_ERROR_Msk (0x1UL << CCM_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */ +#define CCM_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on ENDCRYPT event. */ +#define CCM_INTENCLR_ENDCRYPT_Pos (1UL) /*!< Position of ENDCRYPT field. */ +#define CCM_INTENCLR_ENDCRYPT_Msk (0x1UL << CCM_INTENCLR_ENDCRYPT_Pos) /*!< Bit mask of ENDCRYPT field. */ +#define CCM_INTENCLR_ENDCRYPT_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENCLR_ENDCRYPT_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENCLR_ENDCRYPT_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on ENDKSGEN event. */ +#define CCM_INTENCLR_ENDKSGEN_Pos (0UL) /*!< Position of ENDKSGEN field. */ +#define CCM_INTENCLR_ENDKSGEN_Msk (0x1UL << CCM_INTENCLR_ENDKSGEN_Pos) /*!< Bit mask of ENDKSGEN field. */ +#define CCM_INTENCLR_ENDKSGEN_Disabled (0UL) /*!< Interrupt disabled. */ +#define CCM_INTENCLR_ENDKSGEN_Enabled (1UL) /*!< Interrupt enabled. */ +#define CCM_INTENCLR_ENDKSGEN_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: CCM_MICSTATUS */ +/* Description: CCM RX MIC check result. */ + +/* Bit 0 : Result of the MIC check performed during the previous CCM RX STARTCRYPT */ +#define CCM_MICSTATUS_MICSTATUS_Pos (0UL) /*!< Position of MICSTATUS field. */ +#define CCM_MICSTATUS_MICSTATUS_Msk (0x1UL << CCM_MICSTATUS_MICSTATUS_Pos) /*!< Bit mask of MICSTATUS field. */ +#define CCM_MICSTATUS_MICSTATUS_CheckFailed (0UL) /*!< MIC check failed. */ +#define CCM_MICSTATUS_MICSTATUS_CheckPassed (1UL) /*!< MIC check passed. */ + +/* Register: CCM_ENABLE */ +/* Description: CCM enable. */ + +/* Bits 1..0 : CCM enable. */ +#define CCM_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define CCM_ENABLE_ENABLE_Msk (0x3UL << CCM_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define CCM_ENABLE_ENABLE_Disabled (0x00UL) /*!< CCM is disabled. */ +#define CCM_ENABLE_ENABLE_Enabled (0x02UL) /*!< CCM is enabled. */ + +/* Register: CCM_MODE */ +/* Description: Operation mode. */ + +/* Bit 0 : CCM mode operation. */ +#define CCM_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */ +#define CCM_MODE_MODE_Msk (0x1UL << CCM_MODE_MODE_Pos) /*!< Bit mask of MODE field. */ +#define CCM_MODE_MODE_Encryption (0UL) /*!< CCM mode TX */ +#define CCM_MODE_MODE_Decryption (1UL) /*!< CCM mode TX */ + +/* Register: CCM_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define CCM_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define CCM_POWER_POWER_Msk (0x1UL << CCM_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define CCM_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define CCM_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: CLOCK */ +/* Description: Clock control. */ + +/* Register: CLOCK_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 4 : Enable interrupt on CTTO event. */ +#define CLOCK_INTENSET_CTTO_Pos (4UL) /*!< Position of CTTO field. */ +#define CLOCK_INTENSET_CTTO_Msk (0x1UL << CLOCK_INTENSET_CTTO_Pos) /*!< Bit mask of CTTO field. */ +#define CLOCK_INTENSET_CTTO_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENSET_CTTO_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENSET_CTTO_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 3 : Enable interrupt on DONE event. */ +#define CLOCK_INTENSET_DONE_Pos (3UL) /*!< Position of DONE field. */ +#define CLOCK_INTENSET_DONE_Msk (0x1UL << CLOCK_INTENSET_DONE_Pos) /*!< Bit mask of DONE field. */ +#define CLOCK_INTENSET_DONE_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENSET_DONE_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENSET_DONE_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on LFCLKSTARTED event. */ +#define CLOCK_INTENSET_LFCLKSTARTED_Pos (1UL) /*!< Position of LFCLKSTARTED field. */ +#define CLOCK_INTENSET_LFCLKSTARTED_Msk (0x1UL << CLOCK_INTENSET_LFCLKSTARTED_Pos) /*!< Bit mask of LFCLKSTARTED field. */ +#define CLOCK_INTENSET_LFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENSET_LFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENSET_LFCLKSTARTED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on HFCLKSTARTED event. */ +#define CLOCK_INTENSET_HFCLKSTARTED_Pos (0UL) /*!< Position of HFCLKSTARTED field. */ +#define CLOCK_INTENSET_HFCLKSTARTED_Msk (0x1UL << CLOCK_INTENSET_HFCLKSTARTED_Pos) /*!< Bit mask of HFCLKSTARTED field. */ +#define CLOCK_INTENSET_HFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENSET_HFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENSET_HFCLKSTARTED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: CLOCK_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 4 : Disable interrupt on CTTO event. */ +#define CLOCK_INTENCLR_CTTO_Pos (4UL) /*!< Position of CTTO field. */ +#define CLOCK_INTENCLR_CTTO_Msk (0x1UL << CLOCK_INTENCLR_CTTO_Pos) /*!< Bit mask of CTTO field. */ +#define CLOCK_INTENCLR_CTTO_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENCLR_CTTO_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENCLR_CTTO_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 3 : Disable interrupt on DONE event. */ +#define CLOCK_INTENCLR_DONE_Pos (3UL) /*!< Position of DONE field. */ +#define CLOCK_INTENCLR_DONE_Msk (0x1UL << CLOCK_INTENCLR_DONE_Pos) /*!< Bit mask of DONE field. */ +#define CLOCK_INTENCLR_DONE_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENCLR_DONE_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENCLR_DONE_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on LFCLKSTARTED event. */ +#define CLOCK_INTENCLR_LFCLKSTARTED_Pos (1UL) /*!< Position of LFCLKSTARTED field. */ +#define CLOCK_INTENCLR_LFCLKSTARTED_Msk (0x1UL << CLOCK_INTENCLR_LFCLKSTARTED_Pos) /*!< Bit mask of LFCLKSTARTED field. */ +#define CLOCK_INTENCLR_LFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENCLR_LFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENCLR_LFCLKSTARTED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on HFCLKSTARTED event. */ +#define CLOCK_INTENCLR_HFCLKSTARTED_Pos (0UL) /*!< Position of HFCLKSTARTED field. */ +#define CLOCK_INTENCLR_HFCLKSTARTED_Msk (0x1UL << CLOCK_INTENCLR_HFCLKSTARTED_Pos) /*!< Bit mask of HFCLKSTARTED field. */ +#define CLOCK_INTENCLR_HFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */ +#define CLOCK_INTENCLR_HFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */ +#define CLOCK_INTENCLR_HFCLKSTARTED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: CLOCK_HFCLKSTAT */ +/* Description: High frequency clock status. */ + +/* Bit 16 : State for the HFCLK. */ +#define CLOCK_HFCLKSTAT_STATE_Pos (16UL) /*!< Position of STATE field. */ +#define CLOCK_HFCLKSTAT_STATE_Msk (0x1UL << CLOCK_HFCLKSTAT_STATE_Pos) /*!< Bit mask of STATE field. */ +#define CLOCK_HFCLKSTAT_STATE_NotRunning (0UL) /*!< HFCLK clock not running. */ +#define CLOCK_HFCLKSTAT_STATE_Running (1UL) /*!< HFCLK clock running. */ + +/* Bit 0 : Active clock source for the HF clock. */ +#define CLOCK_HFCLKSTAT_SRC_Pos (0UL) /*!< Position of SRC field. */ +#define CLOCK_HFCLKSTAT_SRC_Msk (0x1UL << CLOCK_HFCLKSTAT_SRC_Pos) /*!< Bit mask of SRC field. */ +#define CLOCK_HFCLKSTAT_SRC_RC (0UL) /*!< Internal 16MHz RC oscillator running and generating the HFCLK clock. */ +#define CLOCK_HFCLKSTAT_SRC_Xtal (1UL) /*!< External 16MHz/32MHz crystal oscillator running and generating the HFCLK clock. */ + +/* Register: CLOCK_LFCLKSTAT */ +/* Description: Low frequency clock status. */ + +/* Bit 16 : State for the LF clock. */ +#define CLOCK_LFCLKSTAT_STATE_Pos (16UL) /*!< Position of STATE field. */ +#define CLOCK_LFCLKSTAT_STATE_Msk (0x1UL << CLOCK_LFCLKSTAT_STATE_Pos) /*!< Bit mask of STATE field. */ +#define CLOCK_LFCLKSTAT_STATE_NotRunning (0UL) /*!< LFCLK clock not running. */ +#define CLOCK_LFCLKSTAT_STATE_Running (1UL) /*!< LFCLK clock running. */ + +/* Bits 1..0 : Active clock source for the LF clock. */ +#define CLOCK_LFCLKSTAT_SRC_Pos (0UL) /*!< Position of SRC field. */ +#define CLOCK_LFCLKSTAT_SRC_Msk (0x3UL << CLOCK_LFCLKSTAT_SRC_Pos) /*!< Bit mask of SRC field. */ +#define CLOCK_LFCLKSTAT_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator running and generating the LFCLK clock. */ +#define CLOCK_LFCLKSTAT_SRC_Xtal (1UL) /*!< External 32KiHz crystal oscillator running and generating the LFCLK clock. */ +#define CLOCK_LFCLKSTAT_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from the HFCLK running and generating the LFCLK clock. */ + +/* Register: CLOCK_LFCLKSRC */ +/* Description: Clock source for the LFCLK clock. */ + +/* Bits 1..0 : Clock source. */ +#define CLOCK_LFCLKSRC_SRC_Pos (0UL) /*!< Position of SRC field. */ +#define CLOCK_LFCLKSRC_SRC_Msk (0x3UL << CLOCK_LFCLKSRC_SRC_Pos) /*!< Bit mask of SRC field. */ +#define CLOCK_LFCLKSRC_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator. */ +#define CLOCK_LFCLKSRC_SRC_Xtal (1UL) /*!< External 32KiHz crystal. */ +#define CLOCK_LFCLKSRC_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from HFCLK system clock. */ + +/* Register: CLOCK_CTIV */ +/* Description: Calibration timer interval. */ + +/* Bits 6..0 : Calibration timer interval in 0.25s resolution. */ +#define CLOCK_CTIV_CTIV_Pos (0UL) /*!< Position of CTIV field. */ +#define CLOCK_CTIV_CTIV_Msk (0x7FUL << CLOCK_CTIV_CTIV_Pos) /*!< Bit mask of CTIV field. */ + +/* Register: CLOCK_XTALFREQ */ +/* Description: Crystal frequency. */ + +/* Bits 7..0 : External Xtal frequency selection. */ +#define CLOCK_XTALFREQ_XTALFREQ_Pos (0UL) /*!< Position of XTALFREQ field. */ +#define CLOCK_XTALFREQ_XTALFREQ_Msk (0xFFUL << CLOCK_XTALFREQ_XTALFREQ_Pos) /*!< Bit mask of XTALFREQ field. */ +#define CLOCK_XTALFREQ_XTALFREQ_16MHz (0xFFUL) /*!< 16MHz xtal is used. */ +#define CLOCK_XTALFREQ_XTALFREQ_32MHz (0x00UL) /*!< 32MHz xtal is used. */ + + +/* Peripheral: COMP */ +/* Description: Comparator. */ + +/* Register: COMP_SHORTS */ +/* Description: Shortcut for the COMP. */ + +/* Bit 4 : Short-cut between CROSS event and STOP task. */ +#define COMP_SHORTS_CROSS_STOP_Pos (4UL) /*!< Position of CROSS_STOP field. */ +#define COMP_SHORTS_CROSS_STOP_Msk (0x1UL << COMP_SHORTS_CROSS_STOP_Pos) /*!< Bit mask of CROSS_STOP field. */ +#define COMP_SHORTS_CROSS_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define COMP_SHORTS_CROSS_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 3 : Short-cut between UP event and STOP task. */ +#define COMP_SHORTS_UP_STOP_Pos (3UL) /*!< Position of UP_STOP field. */ +#define COMP_SHORTS_UP_STOP_Msk (0x1UL << COMP_SHORTS_UP_STOP_Pos) /*!< Bit mask of UP_STOP field. */ +#define COMP_SHORTS_UP_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define COMP_SHORTS_UP_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 2 : Short-cut between DOWN event and STOP task. */ +#define COMP_SHORTS_DOWN_STOP_Pos (2UL) /*!< Position of DOWN_STOP field. */ +#define COMP_SHORTS_DOWN_STOP_Msk (0x1UL << COMP_SHORTS_DOWN_STOP_Pos) /*!< Bit mask of DOWN_STOP field. */ +#define COMP_SHORTS_DOWN_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define COMP_SHORTS_DOWN_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 1 : Short-cut between RADY event and STOP task. */ +#define COMP_SHORTS_READY_STOP_Pos (1UL) /*!< Position of READY_STOP field. */ +#define COMP_SHORTS_READY_STOP_Msk (0x1UL << COMP_SHORTS_READY_STOP_Pos) /*!< Bit mask of READY_STOP field. */ +#define COMP_SHORTS_READY_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define COMP_SHORTS_READY_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 0 : Short-cut between READY event and SAMPLE task. */ +#define COMP_SHORTS_READY_SAMPLE_Pos (0UL) /*!< Position of READY_SAMPLE field. */ +#define COMP_SHORTS_READY_SAMPLE_Msk (0x1UL << COMP_SHORTS_READY_SAMPLE_Pos) /*!< Bit mask of READY_SAMPLE field. */ +#define COMP_SHORTS_READY_SAMPLE_Disabled (0UL) /*!< Shortcut disabled. */ +#define COMP_SHORTS_READY_SAMPLE_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: COMP_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 3 : Enable interrupt on CROSS event. */ +#define COMP_INTENSET_CROSS_Pos (3UL) /*!< Position of CROSS field. */ +#define COMP_INTENSET_CROSS_Msk (0x1UL << COMP_INTENSET_CROSS_Pos) /*!< Bit mask of CROSS field. */ +#define COMP_INTENSET_CROSS_Disabled (0UL) /*!< Interrupt disabled. */ +#define COMP_INTENSET_CROSS_Enabled (1UL) /*!< Interrupt enabled. */ +#define COMP_INTENSET_CROSS_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 2 : Enable interrupt on UP event. */ +#define COMP_INTENSET_UP_Pos (2UL) /*!< Position of UP field. */ +#define COMP_INTENSET_UP_Msk (0x1UL << COMP_INTENSET_UP_Pos) /*!< Bit mask of UP field. */ +#define COMP_INTENSET_UP_Disabled (0UL) /*!< Interrupt disabled. */ +#define COMP_INTENSET_UP_Enabled (1UL) /*!< Interrupt enabled. */ +#define COMP_INTENSET_UP_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on DOWN event. */ +#define COMP_INTENSET_DOWN_Pos (1UL) /*!< Position of DOWN field. */ +#define COMP_INTENSET_DOWN_Msk (0x1UL << COMP_INTENSET_DOWN_Pos) /*!< Bit mask of DOWN field. */ +#define COMP_INTENSET_DOWN_Disabled (0UL) /*!< Interrupt disabled. */ +#define COMP_INTENSET_DOWN_Enabled (1UL) /*!< Interrupt enabled. */ +#define COMP_INTENSET_DOWN_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on READY event. */ +#define COMP_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */ +#define COMP_INTENSET_READY_Msk (0x1UL << COMP_INTENSET_READY_Pos) /*!< Bit mask of READY field. */ +#define COMP_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define COMP_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define COMP_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: COMP_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 3 : Disable interrupt on CROSS event. */ +#define COMP_INTENCLR_CROSS_Pos (3UL) /*!< Position of CROSS field. */ +#define COMP_INTENCLR_CROSS_Msk (0x1UL << COMP_INTENCLR_CROSS_Pos) /*!< Bit mask of CROSS field. */ +#define COMP_INTENCLR_CROSS_Disabled (0UL) /*!< Interrupt disabled. */ +#define COMP_INTENCLR_CROSS_Enabled (1UL) /*!< Interrupt enabled. */ +#define COMP_INTENCLR_CROSS_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 2 : Disable interrupt on UP event. */ +#define COMP_INTENCLR_UP_Pos (2UL) /*!< Position of UP field. */ +#define COMP_INTENCLR_UP_Msk (0x1UL << COMP_INTENCLR_UP_Pos) /*!< Bit mask of UP field. */ +#define COMP_INTENCLR_UP_Disabled (0UL) /*!< Interrupt disabled. */ +#define COMP_INTENCLR_UP_Enabled (1UL) /*!< Interrupt enabled. */ +#define COMP_INTENCLR_UP_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on DOWN event. */ +#define COMP_INTENCLR_DOWN_Pos (1UL) /*!< Position of DOWN field. */ +#define COMP_INTENCLR_DOWN_Msk (0x1UL << COMP_INTENCLR_DOWN_Pos) /*!< Bit mask of DOWN field. */ +#define COMP_INTENCLR_DOWN_Disabled (0UL) /*!< Interrupt disabled. */ +#define COMP_INTENCLR_DOWN_Enabled (1UL) /*!< Interrupt enabled. */ +#define COMP_INTENCLR_DOWN_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on READY event. */ +#define COMP_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */ +#define COMP_INTENCLR_READY_Msk (0x1UL << COMP_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */ +#define COMP_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define COMP_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define COMP_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: COMP_RESULT */ +/* Description: Compare result. */ + +/* Bit 0 : Result of last compare. Decision point SAMPLE task. */ +#define COMP_RESULT_RESULT_Pos (0UL) /*!< Position of RESULT field. */ +#define COMP_RESULT_RESULT_Msk (0x1UL << COMP_RESULT_RESULT_Pos) /*!< Bit mask of RESULT field. */ +#define COMP_RESULT_RESULT_Bellow (0UL) /*!< Input voltage is bellow the reference threshold. */ +#define COMP_RESULT_RESULT_Above (1UL) /*!< Input voltage is above the reference threshold. */ + +/* Register: COMP_ENABLE */ +/* Description: Enable the COMP. */ + +/* Bits 1..0 : Enable or disable COMP. */ +#define COMP_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define COMP_ENABLE_ENABLE_Msk (0x3UL << COMP_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define COMP_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled COMP. */ +#define COMP_ENABLE_ENABLE_Enabled (0x02UL) /*!< Enable COMP. */ + +/* Register: COMP_PSEL */ +/* Description: Input pin select. */ + +/* Bits 2..0 : Analog input pin select. */ +#define COMP_PSEL_PSEL_Pos (0UL) /*!< Position of PSEL field. */ +#define COMP_PSEL_PSEL_Msk (0x7UL << COMP_PSEL_PSEL_Pos) /*!< Bit mask of PSEL field. */ +#define COMP_PSEL_PSEL_AnalogInput0 (0UL) /*!< Use analog input 0 as analog input. */ +#define COMP_PSEL_PSEL_AnalogInput1 (1UL) /*!< Use analog input 1 as analog input. */ +#define COMP_PSEL_PSEL_AnalogInput2 (2UL) /*!< Use analog input 2 as analog input. */ +#define COMP_PSEL_PSEL_AnalogInput3 (3UL) /*!< Use analog input 3 as analog input. */ +#define COMP_PSEL_PSEL_AnalogInput4 (4UL) /*!< Use analog input 4 as analog input. */ +#define COMP_PSEL_PSEL_AnalogInput5 (5UL) /*!< Use analog input 5 as analog input. */ +#define COMP_PSEL_PSEL_AnalogInput6 (6UL) /*!< Use analog input 6 as analog input. */ +#define COMP_PSEL_PSEL_AnalogInput7 (7UL) /*!< Use analog input 7 as analog input. */ + +/* Register: COMP_REFSEL */ +/* Description: Reference select. */ + +/* Bits 2..0 : Reference select. */ +#define COMP_REFSEL_REFSEL_Pos (0UL) /*!< Position of REFSEL field. */ +#define COMP_REFSEL_REFSEL_Msk (0x7UL << COMP_REFSEL_REFSEL_Pos) /*!< Bit mask of REFSEL field. */ +#define COMP_REFSEL_REFSEL_Int1V5 (0UL) /*!< Use internal 1V5 as reference. */ +#define COMP_REFSEL_REFSEL_Int2V0 (1UL) /*!< Use internal 2V0 as reference. */ +#define COMP_REFSEL_REFSEL_Int2V5 (2UL) /*!< Use internal 2V5 as reference. */ +#define COMP_REFSEL_REFSEL_Supply (4UL) /*!< Use supply as reference. */ +#define COMP_REFSEL_REFSEL_ARef (5UL) /*!< Use external analog reference as reference. */ + +/* Register: COMP_EXTREFSEL */ +/* Description: External reference select. */ + +/* Bit 0 : External analog reference pin selection. */ +#define COMP_EXTREFSEL_EXTREFSEL_Pos (0UL) /*!< Position of EXTREFSEL field. */ +#define COMP_EXTREFSEL_EXTREFSEL_Msk (0x1UL << COMP_EXTREFSEL_EXTREFSEL_Pos) /*!< Bit mask of EXTREFSEL field. */ +#define COMP_EXTREFSEL_EXTREFSEL_AnalogReference0 (0UL) /*!< Use analog reference 0 as reference. */ +#define COMP_EXTREFSEL_EXTREFSEL_AnalogReference1 (1UL) /*!< Use analog reference 1 as reference. */ + +/* Register: COMP_TH */ +/* Description: Threshold configuration for hysteresis unit. */ + +/* Bits 13..8 : VDOWN configuration. */ +#define COMP_TH_THDOWN_Pos (8UL) /*!< Position of THDOWN field. */ +#define COMP_TH_THDOWN_Msk (0x3FUL << COMP_TH_THDOWN_Pos) /*!< Bit mask of THDOWN field. */ + +/* Bits 5..0 : VUP configuration. */ +#define COMP_TH_THUP_Pos (0UL) /*!< Position of THUP field. */ +#define COMP_TH_THUP_Msk (0x3FUL << COMP_TH_THUP_Pos) /*!< Bit mask of THUP field. */ + +/* Register: COMP_MODE */ +/* Description: Mode configuration. */ + +/* Bit 8 : Main operation mode. */ +#define COMP_MODE_MAIN_Pos (8UL) /*!< Position of MAIN field. */ +#define COMP_MODE_MAIN_Msk (0x1UL << COMP_MODE_MAIN_Pos) /*!< Bit mask of MAIN field. */ +#define COMP_MODE_MAIN_Single (0UL) /*!< Single ended mode. */ +#define COMP_MODE_MAIN_Diff (1UL) /*!< Differential mode. */ + +/* Bits 1..0 : Speed and power mode. */ +#define COMP_MODE_SP_Pos (0UL) /*!< Position of SP field. */ +#define COMP_MODE_SP_Msk (0x3UL << COMP_MODE_SP_Pos) /*!< Bit mask of SP field. */ +#define COMP_MODE_SP_Low (0UL) /*!< Low power mode. */ +#define COMP_MODE_SP_Normal (1UL) /*!< Normal mode. */ +#define COMP_MODE_SP_High (2UL) /*!< High speed mode. */ + +/* Register: COMP_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define COMP_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define COMP_POWER_POWER_Msk (0x1UL << COMP_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define COMP_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define COMP_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: ECB */ +/* Description: AES ECB Mode Encryption. */ + +/* Register: ECB_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 1 : Enable interrupt on ERRORECB event. */ +#define ECB_INTENSET_ERRORECB_Pos (1UL) /*!< Position of ERRORECB field. */ +#define ECB_INTENSET_ERRORECB_Msk (0x1UL << ECB_INTENSET_ERRORECB_Pos) /*!< Bit mask of ERRORECB field. */ +#define ECB_INTENSET_ERRORECB_Disabled (0UL) /*!< Interrupt disabled. */ +#define ECB_INTENSET_ERRORECB_Enabled (1UL) /*!< Interrupt enabled. */ +#define ECB_INTENSET_ERRORECB_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on ENDECB event. */ +#define ECB_INTENSET_ENDECB_Pos (0UL) /*!< Position of ENDECB field. */ +#define ECB_INTENSET_ENDECB_Msk (0x1UL << ECB_INTENSET_ENDECB_Pos) /*!< Bit mask of ENDECB field. */ +#define ECB_INTENSET_ENDECB_Disabled (0UL) /*!< Interrupt disabled. */ +#define ECB_INTENSET_ENDECB_Enabled (1UL) /*!< Interrupt enabled. */ +#define ECB_INTENSET_ENDECB_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: ECB_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 1 : Disable interrupt on ERRORECB event. */ +#define ECB_INTENCLR_ERRORECB_Pos (1UL) /*!< Position of ERRORECB field. */ +#define ECB_INTENCLR_ERRORECB_Msk (0x1UL << ECB_INTENCLR_ERRORECB_Pos) /*!< Bit mask of ERRORECB field. */ +#define ECB_INTENCLR_ERRORECB_Disabled (0UL) /*!< Interrupt disabled. */ +#define ECB_INTENCLR_ERRORECB_Enabled (1UL) /*!< Interrupt enabled. */ +#define ECB_INTENCLR_ERRORECB_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on ENDECB event. */ +#define ECB_INTENCLR_ENDECB_Pos (0UL) /*!< Position of ENDECB field. */ +#define ECB_INTENCLR_ENDECB_Msk (0x1UL << ECB_INTENCLR_ENDECB_Pos) /*!< Bit mask of ENDECB field. */ +#define ECB_INTENCLR_ENDECB_Disabled (0UL) /*!< Interrupt disabled. */ +#define ECB_INTENCLR_ENDECB_Enabled (1UL) /*!< Interrupt enabled. */ +#define ECB_INTENCLR_ENDECB_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: ECB_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define ECB_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define ECB_POWER_POWER_Msk (0x1UL << ECB_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define ECB_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define ECB_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: FICR */ +/* Description: Factory Information Configuration. */ + +/* Register: FICR_PPFC */ +/* Description: Pre-programmed factory code present. */ + +/* Bits 7..0 : Pre-programmed factory code present. */ +#define FICR_PPFC_PPFC_Pos (0UL) /*!< Position of PPFC field. */ +#define FICR_PPFC_PPFC_Msk (0xFFUL << FICR_PPFC_PPFC_Pos) /*!< Bit mask of PPFC field. */ +#define FICR_PPFC_PPFC_NotPresent (0xFFUL) /*!< Not present. */ +#define FICR_PPFC_PPFC_Present (0x00UL) /*!< Present. */ + +/* Register: FICR_CONFIGID */ +/* Description: Configuration identifier. */ + +/* Bits 31..16 : Firmware Identification Number pre-loaded into the flash. */ +#define FICR_CONFIGID_FWID_Pos (16UL) /*!< Position of FWID field. */ +#define FICR_CONFIGID_FWID_Msk (0xFFFFUL << FICR_CONFIGID_FWID_Pos) /*!< Bit mask of FWID field. */ + +/* Bits 15..0 : Hardware Identification Number. */ +#define FICR_CONFIGID_HWID_Pos (0UL) /*!< Position of HWID field. */ +#define FICR_CONFIGID_HWID_Msk (0xFFFFUL << FICR_CONFIGID_HWID_Pos) /*!< Bit mask of HWID field. */ + +/* Register: FICR_DEVICEADDRTYPE */ +/* Description: Device address type. */ + +/* Bit 0 : Device address type. */ +#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Pos (0UL) /*!< Position of DEVICEADDRTYPE field. */ +#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Msk (0x1UL << FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Pos) /*!< Bit mask of DEVICEADDRTYPE field. */ +#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Public (0UL) /*!< Public address. */ +#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Random (1UL) /*!< Random address. */ + +/* Register: FICR_OVERRIDEEN */ +/* Description: Radio calibration override enable. */ + +/* Bit 3 : Override default values for BLE_1Mbit mode. */ +#define FICR_OVERRIDEEN_BLE_1MBIT_Pos (3UL) /*!< Position of BLE_1MBIT field. */ +#define FICR_OVERRIDEEN_BLE_1MBIT_Msk (0x1UL << FICR_OVERRIDEEN_BLE_1MBIT_Pos) /*!< Bit mask of BLE_1MBIT field. */ +#define FICR_OVERRIDEEN_BLE_1MBIT_Override (0UL) /*!< Override the default values for BLE_1Mbit mode. */ +#define FICR_OVERRIDEEN_BLE_1MBIT_NotOverride (1UL) /*!< Do not override the default values for BLE_1Mbit mode. */ + + +/* Peripheral: GPIO */ +/* Description: General purpose input and output. */ + +/* Register: GPIO_OUT */ +/* Description: Write GPIO port. */ + +/* Bit 31 : Pin 31. */ +#define GPIO_OUT_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_OUT_PIN31_Msk (0x1UL << GPIO_OUT_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_OUT_PIN31_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN31_High (1UL) /*!< Pin driver is high. */ + +/* Bit 30 : Pin 30. */ +#define GPIO_OUT_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_OUT_PIN30_Msk (0x1UL << GPIO_OUT_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_OUT_PIN30_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN30_High (1UL) /*!< Pin driver is high. */ + +/* Bit 29 : Pin 29. */ +#define GPIO_OUT_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_OUT_PIN29_Msk (0x1UL << GPIO_OUT_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_OUT_PIN29_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN29_High (1UL) /*!< Pin driver is high. */ + +/* Bit 28 : Pin 28. */ +#define GPIO_OUT_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_OUT_PIN28_Msk (0x1UL << GPIO_OUT_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_OUT_PIN28_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN28_High (1UL) /*!< Pin driver is high. */ + +/* Bit 27 : Pin 27. */ +#define GPIO_OUT_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_OUT_PIN27_Msk (0x1UL << GPIO_OUT_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_OUT_PIN27_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN27_High (1UL) /*!< Pin driver is high. */ + +/* Bit 26 : Pin 26. */ +#define GPIO_OUT_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_OUT_PIN26_Msk (0x1UL << GPIO_OUT_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_OUT_PIN26_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN26_High (1UL) /*!< Pin driver is high. */ + +/* Bit 25 : Pin 25. */ +#define GPIO_OUT_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_OUT_PIN25_Msk (0x1UL << GPIO_OUT_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_OUT_PIN25_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN25_High (1UL) /*!< Pin driver is high. */ + +/* Bit 24 : Pin 24. */ +#define GPIO_OUT_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_OUT_PIN24_Msk (0x1UL << GPIO_OUT_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_OUT_PIN24_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN24_High (1UL) /*!< Pin driver is high. */ + +/* Bit 23 : Pin 23. */ +#define GPIO_OUT_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_OUT_PIN23_Msk (0x1UL << GPIO_OUT_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_OUT_PIN23_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN23_High (1UL) /*!< Pin driver is high. */ + +/* Bit 22 : Pin 22. */ +#define GPIO_OUT_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_OUT_PIN22_Msk (0x1UL << GPIO_OUT_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_OUT_PIN22_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN22_High (1UL) /*!< Pin driver is high. */ + +/* Bit 21 : Pin 21. */ +#define GPIO_OUT_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_OUT_PIN21_Msk (0x1UL << GPIO_OUT_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_OUT_PIN21_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN21_High (1UL) /*!< Pin driver is high. */ + +/* Bit 20 : Pin 20. */ +#define GPIO_OUT_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_OUT_PIN20_Msk (0x1UL << GPIO_OUT_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_OUT_PIN20_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN20_High (1UL) /*!< Pin driver is high. */ + +/* Bit 19 : Pin 19. */ +#define GPIO_OUT_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_OUT_PIN19_Msk (0x1UL << GPIO_OUT_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_OUT_PIN19_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN19_High (1UL) /*!< Pin driver is high. */ + +/* Bit 18 : Pin 18. */ +#define GPIO_OUT_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_OUT_PIN18_Msk (0x1UL << GPIO_OUT_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_OUT_PIN18_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN18_High (1UL) /*!< Pin driver is high. */ + +/* Bit 17 : Pin 17. */ +#define GPIO_OUT_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_OUT_PIN17_Msk (0x1UL << GPIO_OUT_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_OUT_PIN17_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN17_High (1UL) /*!< Pin driver is high. */ + +/* Bit 16 : Pin 16. */ +#define GPIO_OUT_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_OUT_PIN16_Msk (0x1UL << GPIO_OUT_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_OUT_PIN16_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN16_High (1UL) /*!< Pin driver is high. */ + +/* Bit 15 : Pin 15. */ +#define GPIO_OUT_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_OUT_PIN15_Msk (0x1UL << GPIO_OUT_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_OUT_PIN15_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN15_High (1UL) /*!< Pin driver is high. */ + +/* Bit 14 : Pin 14. */ +#define GPIO_OUT_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_OUT_PIN14_Msk (0x1UL << GPIO_OUT_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_OUT_PIN14_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN14_High (1UL) /*!< Pin driver is high. */ + +/* Bit 13 : Pin 13. */ +#define GPIO_OUT_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_OUT_PIN13_Msk (0x1UL << GPIO_OUT_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_OUT_PIN13_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN13_High (1UL) /*!< Pin driver is high. */ + +/* Bit 12 : Pin 12. */ +#define GPIO_OUT_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_OUT_PIN12_Msk (0x1UL << GPIO_OUT_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_OUT_PIN12_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN12_High (1UL) /*!< Pin driver is high. */ + +/* Bit 11 : Pin 11. */ +#define GPIO_OUT_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_OUT_PIN11_Msk (0x1UL << GPIO_OUT_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_OUT_PIN11_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN11_High (1UL) /*!< Pin driver is high. */ + +/* Bit 10 : Pin 10. */ +#define GPIO_OUT_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_OUT_PIN10_Msk (0x1UL << GPIO_OUT_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_OUT_PIN10_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN10_High (1UL) /*!< Pin driver is high. */ + +/* Bit 9 : Pin 9. */ +#define GPIO_OUT_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_OUT_PIN9_Msk (0x1UL << GPIO_OUT_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_OUT_PIN9_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN9_High (1UL) /*!< Pin driver is high. */ + +/* Bit 8 : Pin 8. */ +#define GPIO_OUT_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_OUT_PIN8_Msk (0x1UL << GPIO_OUT_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_OUT_PIN8_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN8_High (1UL) /*!< Pin driver is high. */ + +/* Bit 7 : Pin 7. */ +#define GPIO_OUT_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_OUT_PIN7_Msk (0x1UL << GPIO_OUT_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_OUT_PIN7_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN7_High (1UL) /*!< Pin driver is high. */ + +/* Bit 6 : Pin 6. */ +#define GPIO_OUT_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_OUT_PIN6_Msk (0x1UL << GPIO_OUT_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_OUT_PIN6_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN6_High (1UL) /*!< Pin driver is high. */ + +/* Bit 5 : Pin 5. */ +#define GPIO_OUT_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_OUT_PIN5_Msk (0x1UL << GPIO_OUT_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_OUT_PIN5_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN5_High (1UL) /*!< Pin driver is high. */ + +/* Bit 4 : Pin 4. */ +#define GPIO_OUT_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_OUT_PIN4_Msk (0x1UL << GPIO_OUT_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_OUT_PIN4_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN4_High (1UL) /*!< Pin driver is high. */ + +/* Bit 3 : Pin 3. */ +#define GPIO_OUT_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_OUT_PIN3_Msk (0x1UL << GPIO_OUT_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_OUT_PIN3_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN3_High (1UL) /*!< Pin driver is high. */ + +/* Bit 2 : Pin 2. */ +#define GPIO_OUT_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_OUT_PIN2_Msk (0x1UL << GPIO_OUT_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_OUT_PIN2_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN2_High (1UL) /*!< Pin driver is high. */ + +/* Bit 1 : Pin 1. */ +#define GPIO_OUT_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_OUT_PIN1_Msk (0x1UL << GPIO_OUT_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_OUT_PIN1_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN1_High (1UL) /*!< Pin driver is high. */ + +/* Bit 0 : Pin 0. */ +#define GPIO_OUT_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_OUT_PIN0_Msk (0x1UL << GPIO_OUT_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_OUT_PIN0_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUT_PIN0_High (1UL) /*!< Pin driver is high. */ + +/* Register: GPIO_OUTSET */ +/* Description: Set individual bits in GPIO port. */ + +/* Bit 31 : Pin 31. */ +#define GPIO_OUTSET_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_OUTSET_PIN31_Msk (0x1UL << GPIO_OUTSET_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_OUTSET_PIN31_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN31_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN31_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 30 : Pin 30. */ +#define GPIO_OUTSET_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_OUTSET_PIN30_Msk (0x1UL << GPIO_OUTSET_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_OUTSET_PIN30_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN30_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN30_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 29 : Pin 29. */ +#define GPIO_OUTSET_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_OUTSET_PIN29_Msk (0x1UL << GPIO_OUTSET_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_OUTSET_PIN29_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN29_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN29_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 28 : Pin 28. */ +#define GPIO_OUTSET_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_OUTSET_PIN28_Msk (0x1UL << GPIO_OUTSET_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_OUTSET_PIN28_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN28_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN28_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 27 : Pin 27. */ +#define GPIO_OUTSET_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_OUTSET_PIN27_Msk (0x1UL << GPIO_OUTSET_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_OUTSET_PIN27_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN27_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN27_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 26 : Pin 26. */ +#define GPIO_OUTSET_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_OUTSET_PIN26_Msk (0x1UL << GPIO_OUTSET_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_OUTSET_PIN26_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN26_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN26_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 25 : Pin 25. */ +#define GPIO_OUTSET_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_OUTSET_PIN25_Msk (0x1UL << GPIO_OUTSET_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_OUTSET_PIN25_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN25_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN25_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 24 : Pin 24. */ +#define GPIO_OUTSET_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_OUTSET_PIN24_Msk (0x1UL << GPIO_OUTSET_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_OUTSET_PIN24_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN24_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN24_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 23 : Pin 23. */ +#define GPIO_OUTSET_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_OUTSET_PIN23_Msk (0x1UL << GPIO_OUTSET_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_OUTSET_PIN23_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN23_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN23_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 22 : Pin 22. */ +#define GPIO_OUTSET_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_OUTSET_PIN22_Msk (0x1UL << GPIO_OUTSET_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_OUTSET_PIN22_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN22_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN22_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 21 : Pin 21. */ +#define GPIO_OUTSET_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_OUTSET_PIN21_Msk (0x1UL << GPIO_OUTSET_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_OUTSET_PIN21_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN21_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN21_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 20 : Pin 20. */ +#define GPIO_OUTSET_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_OUTSET_PIN20_Msk (0x1UL << GPIO_OUTSET_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_OUTSET_PIN20_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN20_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN20_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 19 : Pin 19. */ +#define GPIO_OUTSET_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_OUTSET_PIN19_Msk (0x1UL << GPIO_OUTSET_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_OUTSET_PIN19_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN19_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN19_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 18 : Pin 18. */ +#define GPIO_OUTSET_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_OUTSET_PIN18_Msk (0x1UL << GPIO_OUTSET_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_OUTSET_PIN18_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN18_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN18_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 17 : Pin 17. */ +#define GPIO_OUTSET_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_OUTSET_PIN17_Msk (0x1UL << GPIO_OUTSET_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_OUTSET_PIN17_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN17_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN17_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 16 : Pin 16. */ +#define GPIO_OUTSET_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_OUTSET_PIN16_Msk (0x1UL << GPIO_OUTSET_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_OUTSET_PIN16_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN16_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN16_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 15 : Pin 15. */ +#define GPIO_OUTSET_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_OUTSET_PIN15_Msk (0x1UL << GPIO_OUTSET_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_OUTSET_PIN15_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN15_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN15_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 14 : Pin 14. */ +#define GPIO_OUTSET_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_OUTSET_PIN14_Msk (0x1UL << GPIO_OUTSET_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_OUTSET_PIN14_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN14_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN14_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 13 : Pin 13. */ +#define GPIO_OUTSET_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_OUTSET_PIN13_Msk (0x1UL << GPIO_OUTSET_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_OUTSET_PIN13_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN13_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN13_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 12 : Pin 12. */ +#define GPIO_OUTSET_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_OUTSET_PIN12_Msk (0x1UL << GPIO_OUTSET_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_OUTSET_PIN12_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN12_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN12_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 11 : Pin 11. */ +#define GPIO_OUTSET_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_OUTSET_PIN11_Msk (0x1UL << GPIO_OUTSET_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_OUTSET_PIN11_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN11_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN11_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 10 : Pin 10. */ +#define GPIO_OUTSET_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_OUTSET_PIN10_Msk (0x1UL << GPIO_OUTSET_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_OUTSET_PIN10_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN10_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN10_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 9 : Pin 9. */ +#define GPIO_OUTSET_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_OUTSET_PIN9_Msk (0x1UL << GPIO_OUTSET_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_OUTSET_PIN9_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN9_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN9_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 8 : Pin 8. */ +#define GPIO_OUTSET_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_OUTSET_PIN8_Msk (0x1UL << GPIO_OUTSET_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_OUTSET_PIN8_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN8_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN8_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 7 : Pin 7. */ +#define GPIO_OUTSET_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_OUTSET_PIN7_Msk (0x1UL << GPIO_OUTSET_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_OUTSET_PIN7_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN7_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN7_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 6 : Pin 6. */ +#define GPIO_OUTSET_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_OUTSET_PIN6_Msk (0x1UL << GPIO_OUTSET_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_OUTSET_PIN6_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN6_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN6_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 5 : Pin 5. */ +#define GPIO_OUTSET_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_OUTSET_PIN5_Msk (0x1UL << GPIO_OUTSET_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_OUTSET_PIN5_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN5_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN5_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 4 : Pin 4. */ +#define GPIO_OUTSET_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_OUTSET_PIN4_Msk (0x1UL << GPIO_OUTSET_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_OUTSET_PIN4_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN4_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN4_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 3 : Pin 3. */ +#define GPIO_OUTSET_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_OUTSET_PIN3_Msk (0x1UL << GPIO_OUTSET_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_OUTSET_PIN3_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN3_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN3_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 2 : Pin 2. */ +#define GPIO_OUTSET_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_OUTSET_PIN2_Msk (0x1UL << GPIO_OUTSET_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_OUTSET_PIN2_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN2_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN2_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 1 : Pin 1. */ +#define GPIO_OUTSET_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_OUTSET_PIN1_Msk (0x1UL << GPIO_OUTSET_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_OUTSET_PIN1_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN1_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN1_Set (1UL) /*!< Set pin driver high. */ + +/* Bit 0 : Pin 0. */ +#define GPIO_OUTSET_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_OUTSET_PIN0_Msk (0x1UL << GPIO_OUTSET_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_OUTSET_PIN0_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTSET_PIN0_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTSET_PIN0_Set (1UL) /*!< Set pin driver high. */ + +/* Register: GPIO_OUTCLR */ +/* Description: Clear individual bits in GPIO port. */ + +/* Bit 31 : Pin 31. */ +#define GPIO_OUTCLR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_OUTCLR_PIN31_Msk (0x1UL << GPIO_OUTCLR_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_OUTCLR_PIN31_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN31_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN31_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 30 : Pin 30. */ +#define GPIO_OUTCLR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_OUTCLR_PIN30_Msk (0x1UL << GPIO_OUTCLR_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_OUTCLR_PIN30_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN30_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN30_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 29 : Pin 29. */ +#define GPIO_OUTCLR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_OUTCLR_PIN29_Msk (0x1UL << GPIO_OUTCLR_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_OUTCLR_PIN29_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN29_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN29_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 28 : Pin 28. */ +#define GPIO_OUTCLR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_OUTCLR_PIN28_Msk (0x1UL << GPIO_OUTCLR_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_OUTCLR_PIN28_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN28_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN28_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 27 : Pin 27. */ +#define GPIO_OUTCLR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_OUTCLR_PIN27_Msk (0x1UL << GPIO_OUTCLR_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_OUTCLR_PIN27_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN27_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN27_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 26 : Pin 26. */ +#define GPIO_OUTCLR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_OUTCLR_PIN26_Msk (0x1UL << GPIO_OUTCLR_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_OUTCLR_PIN26_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN26_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN26_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 25 : Pin 25. */ +#define GPIO_OUTCLR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_OUTCLR_PIN25_Msk (0x1UL << GPIO_OUTCLR_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_OUTCLR_PIN25_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN25_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN25_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 24 : Pin 24. */ +#define GPIO_OUTCLR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_OUTCLR_PIN24_Msk (0x1UL << GPIO_OUTCLR_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_OUTCLR_PIN24_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN24_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN24_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 23 : Pin 23. */ +#define GPIO_OUTCLR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_OUTCLR_PIN23_Msk (0x1UL << GPIO_OUTCLR_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_OUTCLR_PIN23_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN23_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN23_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 22 : Pin 22. */ +#define GPIO_OUTCLR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_OUTCLR_PIN22_Msk (0x1UL << GPIO_OUTCLR_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_OUTCLR_PIN22_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN22_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN22_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 21 : Pin 21. */ +#define GPIO_OUTCLR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_OUTCLR_PIN21_Msk (0x1UL << GPIO_OUTCLR_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_OUTCLR_PIN21_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN21_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN21_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 20 : Pin 20. */ +#define GPIO_OUTCLR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_OUTCLR_PIN20_Msk (0x1UL << GPIO_OUTCLR_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_OUTCLR_PIN20_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN20_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN20_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 19 : Pin 19. */ +#define GPIO_OUTCLR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_OUTCLR_PIN19_Msk (0x1UL << GPIO_OUTCLR_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_OUTCLR_PIN19_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN19_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN19_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 18 : Pin 18. */ +#define GPIO_OUTCLR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_OUTCLR_PIN18_Msk (0x1UL << GPIO_OUTCLR_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_OUTCLR_PIN18_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN18_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN18_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 17 : Pin 17. */ +#define GPIO_OUTCLR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_OUTCLR_PIN17_Msk (0x1UL << GPIO_OUTCLR_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_OUTCLR_PIN17_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN17_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN17_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 16 : Pin 16. */ +#define GPIO_OUTCLR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_OUTCLR_PIN16_Msk (0x1UL << GPIO_OUTCLR_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_OUTCLR_PIN16_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN16_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN16_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 15 : Pin 15. */ +#define GPIO_OUTCLR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_OUTCLR_PIN15_Msk (0x1UL << GPIO_OUTCLR_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_OUTCLR_PIN15_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN15_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN15_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 14 : Pin 14. */ +#define GPIO_OUTCLR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_OUTCLR_PIN14_Msk (0x1UL << GPIO_OUTCLR_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_OUTCLR_PIN14_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN14_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN14_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 13 : Pin 13. */ +#define GPIO_OUTCLR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_OUTCLR_PIN13_Msk (0x1UL << GPIO_OUTCLR_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_OUTCLR_PIN13_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN13_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN13_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 12 : Pin 12. */ +#define GPIO_OUTCLR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_OUTCLR_PIN12_Msk (0x1UL << GPIO_OUTCLR_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_OUTCLR_PIN12_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN12_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN12_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 11 : Pin 11. */ +#define GPIO_OUTCLR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_OUTCLR_PIN11_Msk (0x1UL << GPIO_OUTCLR_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_OUTCLR_PIN11_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN11_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN11_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 10 : Pin 10. */ +#define GPIO_OUTCLR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_OUTCLR_PIN10_Msk (0x1UL << GPIO_OUTCLR_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_OUTCLR_PIN10_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN10_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN10_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 9 : Pin 9. */ +#define GPIO_OUTCLR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_OUTCLR_PIN9_Msk (0x1UL << GPIO_OUTCLR_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_OUTCLR_PIN9_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN9_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN9_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 8 : Pin 8. */ +#define GPIO_OUTCLR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_OUTCLR_PIN8_Msk (0x1UL << GPIO_OUTCLR_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_OUTCLR_PIN8_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN8_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN8_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 7 : Pin 7. */ +#define GPIO_OUTCLR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_OUTCLR_PIN7_Msk (0x1UL << GPIO_OUTCLR_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_OUTCLR_PIN7_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN7_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN7_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 6 : Pin 6. */ +#define GPIO_OUTCLR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_OUTCLR_PIN6_Msk (0x1UL << GPIO_OUTCLR_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_OUTCLR_PIN6_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN6_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN6_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 5 : Pin 5. */ +#define GPIO_OUTCLR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_OUTCLR_PIN5_Msk (0x1UL << GPIO_OUTCLR_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_OUTCLR_PIN5_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN5_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN5_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 4 : Pin 4. */ +#define GPIO_OUTCLR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_OUTCLR_PIN4_Msk (0x1UL << GPIO_OUTCLR_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_OUTCLR_PIN4_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN4_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN4_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 3 : Pin 3. */ +#define GPIO_OUTCLR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_OUTCLR_PIN3_Msk (0x1UL << GPIO_OUTCLR_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_OUTCLR_PIN3_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN3_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN3_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 2 : Pin 2. */ +#define GPIO_OUTCLR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_OUTCLR_PIN2_Msk (0x1UL << GPIO_OUTCLR_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_OUTCLR_PIN2_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN2_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN2_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 1 : Pin 1. */ +#define GPIO_OUTCLR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_OUTCLR_PIN1_Msk (0x1UL << GPIO_OUTCLR_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_OUTCLR_PIN1_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN1_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN1_Clear (1UL) /*!< Set pin driver low. */ + +/* Bit 0 : Pin 0. */ +#define GPIO_OUTCLR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_OUTCLR_PIN0_Msk (0x1UL << GPIO_OUTCLR_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_OUTCLR_PIN0_Low (0UL) /*!< Pin driver is low. */ +#define GPIO_OUTCLR_PIN0_High (1UL) /*!< Pin driver is high. */ +#define GPIO_OUTCLR_PIN0_Clear (1UL) /*!< Set pin driver low. */ + +/* Register: GPIO_IN */ +/* Description: Read GPIO port. */ + +/* Bit 31 : Pin 31. */ +#define GPIO_IN_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_IN_PIN31_Msk (0x1UL << GPIO_IN_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_IN_PIN31_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN31_High (1UL) /*!< Pin input is high. */ + +/* Bit 30 : Pin 30. */ +#define GPIO_IN_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_IN_PIN30_Msk (0x1UL << GPIO_IN_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_IN_PIN30_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN30_High (1UL) /*!< Pin input is high. */ + +/* Bit 29 : Pin 29. */ +#define GPIO_IN_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_IN_PIN29_Msk (0x1UL << GPIO_IN_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_IN_PIN29_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN29_High (1UL) /*!< Pin input is high. */ + +/* Bit 28 : Pin 28. */ +#define GPIO_IN_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_IN_PIN28_Msk (0x1UL << GPIO_IN_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_IN_PIN28_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN28_High (1UL) /*!< Pin input is high. */ + +/* Bit 27 : Pin 27. */ +#define GPIO_IN_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_IN_PIN27_Msk (0x1UL << GPIO_IN_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_IN_PIN27_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN27_High (1UL) /*!< Pin input is high. */ + +/* Bit 26 : Pin 26. */ +#define GPIO_IN_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_IN_PIN26_Msk (0x1UL << GPIO_IN_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_IN_PIN26_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN26_High (1UL) /*!< Pin input is high. */ + +/* Bit 25 : Pin 25. */ +#define GPIO_IN_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_IN_PIN25_Msk (0x1UL << GPIO_IN_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_IN_PIN25_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN25_High (1UL) /*!< Pin input is high. */ + +/* Bit 24 : Pin 24. */ +#define GPIO_IN_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_IN_PIN24_Msk (0x1UL << GPIO_IN_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_IN_PIN24_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN24_High (1UL) /*!< Pin input is high. */ + +/* Bit 23 : Pin 23. */ +#define GPIO_IN_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_IN_PIN23_Msk (0x1UL << GPIO_IN_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_IN_PIN23_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN23_High (1UL) /*!< Pin input is high. */ + +/* Bit 22 : Pin 22. */ +#define GPIO_IN_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_IN_PIN22_Msk (0x1UL << GPIO_IN_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_IN_PIN22_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN22_High (1UL) /*!< Pin input is high. */ + +/* Bit 21 : Pin 21. */ +#define GPIO_IN_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_IN_PIN21_Msk (0x1UL << GPIO_IN_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_IN_PIN21_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN21_High (1UL) /*!< Pin input is high. */ + +/* Bit 20 : Pin 20. */ +#define GPIO_IN_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_IN_PIN20_Msk (0x1UL << GPIO_IN_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_IN_PIN20_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN20_High (1UL) /*!< Pin input is high. */ + +/* Bit 19 : Pin 19. */ +#define GPIO_IN_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_IN_PIN19_Msk (0x1UL << GPIO_IN_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_IN_PIN19_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN19_High (1UL) /*!< Pin input is high. */ + +/* Bit 18 : Pin 18. */ +#define GPIO_IN_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_IN_PIN18_Msk (0x1UL << GPIO_IN_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_IN_PIN18_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN18_High (1UL) /*!< Pin input is high. */ + +/* Bit 17 : Pin 17. */ +#define GPIO_IN_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_IN_PIN17_Msk (0x1UL << GPIO_IN_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_IN_PIN17_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN17_High (1UL) /*!< Pin input is high. */ + +/* Bit 16 : Pin 16. */ +#define GPIO_IN_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_IN_PIN16_Msk (0x1UL << GPIO_IN_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_IN_PIN16_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN16_High (1UL) /*!< Pin input is high. */ + +/* Bit 15 : Pin 15. */ +#define GPIO_IN_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_IN_PIN15_Msk (0x1UL << GPIO_IN_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_IN_PIN15_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN15_High (1UL) /*!< Pin input is high. */ + +/* Bit 14 : Pin 14. */ +#define GPIO_IN_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_IN_PIN14_Msk (0x1UL << GPIO_IN_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_IN_PIN14_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN14_High (1UL) /*!< Pin input is high. */ + +/* Bit 13 : Pin 13. */ +#define GPIO_IN_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_IN_PIN13_Msk (0x1UL << GPIO_IN_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_IN_PIN13_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN13_High (1UL) /*!< Pin input is high. */ + +/* Bit 12 : Pin 12. */ +#define GPIO_IN_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_IN_PIN12_Msk (0x1UL << GPIO_IN_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_IN_PIN12_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN12_High (1UL) /*!< Pin input is high. */ + +/* Bit 11 : Pin 11. */ +#define GPIO_IN_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_IN_PIN11_Msk (0x1UL << GPIO_IN_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_IN_PIN11_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN11_High (1UL) /*!< Pin input is high. */ + +/* Bit 10 : Pin 10. */ +#define GPIO_IN_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_IN_PIN10_Msk (0x1UL << GPIO_IN_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_IN_PIN10_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN10_High (1UL) /*!< Pin input is high. */ + +/* Bit 9 : Pin 9. */ +#define GPIO_IN_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_IN_PIN9_Msk (0x1UL << GPIO_IN_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_IN_PIN9_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN9_High (1UL) /*!< Pin input is high. */ + +/* Bit 8 : Pin 8. */ +#define GPIO_IN_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_IN_PIN8_Msk (0x1UL << GPIO_IN_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_IN_PIN8_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN8_High (1UL) /*!< Pin input is high. */ + +/* Bit 7 : Pin 7. */ +#define GPIO_IN_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_IN_PIN7_Msk (0x1UL << GPIO_IN_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_IN_PIN7_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN7_High (1UL) /*!< Pin input is high. */ + +/* Bit 6 : Pin 6. */ +#define GPIO_IN_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_IN_PIN6_Msk (0x1UL << GPIO_IN_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_IN_PIN6_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN6_High (1UL) /*!< Pin input is high. */ + +/* Bit 5 : Pin 5. */ +#define GPIO_IN_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_IN_PIN5_Msk (0x1UL << GPIO_IN_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_IN_PIN5_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN5_High (1UL) /*!< Pin input is high. */ + +/* Bit 4 : Pin 4. */ +#define GPIO_IN_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_IN_PIN4_Msk (0x1UL << GPIO_IN_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_IN_PIN4_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN4_High (1UL) /*!< Pin input is high. */ + +/* Bit 3 : Pin 3. */ +#define GPIO_IN_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_IN_PIN3_Msk (0x1UL << GPIO_IN_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_IN_PIN3_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN3_High (1UL) /*!< Pin input is high. */ + +/* Bit 2 : Pin 2. */ +#define GPIO_IN_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_IN_PIN2_Msk (0x1UL << GPIO_IN_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_IN_PIN2_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN2_High (1UL) /*!< Pin input is high. */ + +/* Bit 1 : Pin 1. */ +#define GPIO_IN_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_IN_PIN1_Msk (0x1UL << GPIO_IN_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_IN_PIN1_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN1_High (1UL) /*!< Pin input is high. */ + +/* Bit 0 : Pin 0. */ +#define GPIO_IN_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_IN_PIN0_Msk (0x1UL << GPIO_IN_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_IN_PIN0_Low (0UL) /*!< Pin input is low. */ +#define GPIO_IN_PIN0_High (1UL) /*!< Pin input is high. */ + +/* Register: GPIO_DIR */ +/* Description: Direction of GPIO pins. */ + +/* Bit 31 : Pin 31. */ +#define GPIO_DIR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_DIR_PIN31_Msk (0x1UL << GPIO_DIR_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_DIR_PIN31_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN31_Output (1UL) /*!< Pin set as output. */ + +/* Bit 30 : Pin 30. */ +#define GPIO_DIR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_DIR_PIN30_Msk (0x1UL << GPIO_DIR_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_DIR_PIN30_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN30_Output (1UL) /*!< Pin set as output. */ + +/* Bit 29 : Pin 29. */ +#define GPIO_DIR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_DIR_PIN29_Msk (0x1UL << GPIO_DIR_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_DIR_PIN29_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN29_Output (1UL) /*!< Pin set as output. */ + +/* Bit 28 : Pin 28. */ +#define GPIO_DIR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_DIR_PIN28_Msk (0x1UL << GPIO_DIR_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_DIR_PIN28_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN28_Output (1UL) /*!< Pin set as output. */ + +/* Bit 27 : Pin 27. */ +#define GPIO_DIR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_DIR_PIN27_Msk (0x1UL << GPIO_DIR_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_DIR_PIN27_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN27_Output (1UL) /*!< Pin set as output. */ + +/* Bit 26 : Pin 26. */ +#define GPIO_DIR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_DIR_PIN26_Msk (0x1UL << GPIO_DIR_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_DIR_PIN26_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN26_Output (1UL) /*!< Pin set as output. */ + +/* Bit 25 : Pin 25. */ +#define GPIO_DIR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_DIR_PIN25_Msk (0x1UL << GPIO_DIR_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_DIR_PIN25_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN25_Output (1UL) /*!< Pin set as output. */ + +/* Bit 24 : Pin 24. */ +#define GPIO_DIR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_DIR_PIN24_Msk (0x1UL << GPIO_DIR_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_DIR_PIN24_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN24_Output (1UL) /*!< Pin set as output. */ + +/* Bit 23 : Pin 23. */ +#define GPIO_DIR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_DIR_PIN23_Msk (0x1UL << GPIO_DIR_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_DIR_PIN23_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN23_Output (1UL) /*!< Pin set as output. */ + +/* Bit 22 : Pin 22. */ +#define GPIO_DIR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_DIR_PIN22_Msk (0x1UL << GPIO_DIR_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_DIR_PIN22_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN22_Output (1UL) /*!< Pin set as output. */ + +/* Bit 21 : Pin 21. */ +#define GPIO_DIR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_DIR_PIN21_Msk (0x1UL << GPIO_DIR_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_DIR_PIN21_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN21_Output (1UL) /*!< Pin set as output. */ + +/* Bit 20 : Pin 20. */ +#define GPIO_DIR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_DIR_PIN20_Msk (0x1UL << GPIO_DIR_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_DIR_PIN20_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN20_Output (1UL) /*!< Pin set as output. */ + +/* Bit 19 : Pin 19. */ +#define GPIO_DIR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_DIR_PIN19_Msk (0x1UL << GPIO_DIR_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_DIR_PIN19_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN19_Output (1UL) /*!< Pin set as output. */ + +/* Bit 18 : Pin 18. */ +#define GPIO_DIR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_DIR_PIN18_Msk (0x1UL << GPIO_DIR_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_DIR_PIN18_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN18_Output (1UL) /*!< Pin set as output. */ + +/* Bit 17 : Pin 17. */ +#define GPIO_DIR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_DIR_PIN17_Msk (0x1UL << GPIO_DIR_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_DIR_PIN17_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN17_Output (1UL) /*!< Pin set as output. */ + +/* Bit 16 : Pin 16. */ +#define GPIO_DIR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_DIR_PIN16_Msk (0x1UL << GPIO_DIR_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_DIR_PIN16_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN16_Output (1UL) /*!< Pin set as output. */ + +/* Bit 15 : Pin 15. */ +#define GPIO_DIR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_DIR_PIN15_Msk (0x1UL << GPIO_DIR_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_DIR_PIN15_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN15_Output (1UL) /*!< Pin set as output. */ + +/* Bit 14 : Pin 14. */ +#define GPIO_DIR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_DIR_PIN14_Msk (0x1UL << GPIO_DIR_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_DIR_PIN14_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN14_Output (1UL) /*!< Pin set as output. */ + +/* Bit 13 : Pin 13. */ +#define GPIO_DIR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_DIR_PIN13_Msk (0x1UL << GPIO_DIR_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_DIR_PIN13_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN13_Output (1UL) /*!< Pin set as output. */ + +/* Bit 12 : Pin 12. */ +#define GPIO_DIR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_DIR_PIN12_Msk (0x1UL << GPIO_DIR_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_DIR_PIN12_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN12_Output (1UL) /*!< Pin set as output. */ + +/* Bit 11 : Pin 11. */ +#define GPIO_DIR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_DIR_PIN11_Msk (0x1UL << GPIO_DIR_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_DIR_PIN11_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN11_Output (1UL) /*!< Pin set as output. */ + +/* Bit 10 : Pin 10. */ +#define GPIO_DIR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_DIR_PIN10_Msk (0x1UL << GPIO_DIR_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_DIR_PIN10_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN10_Output (1UL) /*!< Pin set as output. */ + +/* Bit 9 : Pin 9. */ +#define GPIO_DIR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_DIR_PIN9_Msk (0x1UL << GPIO_DIR_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_DIR_PIN9_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN9_Output (1UL) /*!< Pin set as output. */ + +/* Bit 8 : Pin 8. */ +#define GPIO_DIR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_DIR_PIN8_Msk (0x1UL << GPIO_DIR_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_DIR_PIN8_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN8_Output (1UL) /*!< Pin set as output. */ + +/* Bit 7 : Pin 7. */ +#define GPIO_DIR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_DIR_PIN7_Msk (0x1UL << GPIO_DIR_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_DIR_PIN7_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN7_Output (1UL) /*!< Pin set as output. */ + +/* Bit 6 : Pin 6. */ +#define GPIO_DIR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_DIR_PIN6_Msk (0x1UL << GPIO_DIR_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_DIR_PIN6_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN6_Output (1UL) /*!< Pin set as output. */ + +/* Bit 5 : Pin 5. */ +#define GPIO_DIR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_DIR_PIN5_Msk (0x1UL << GPIO_DIR_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_DIR_PIN5_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN5_Output (1UL) /*!< Pin set as output. */ + +/* Bit 4 : Pin 4. */ +#define GPIO_DIR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_DIR_PIN4_Msk (0x1UL << GPIO_DIR_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_DIR_PIN4_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN4_Output (1UL) /*!< Pin set as output. */ + +/* Bit 3 : Pin 3. */ +#define GPIO_DIR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_DIR_PIN3_Msk (0x1UL << GPIO_DIR_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_DIR_PIN3_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN3_Output (1UL) /*!< Pin set as output. */ + +/* Bit 2 : Pin 2. */ +#define GPIO_DIR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_DIR_PIN2_Msk (0x1UL << GPIO_DIR_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_DIR_PIN2_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN2_Output (1UL) /*!< Pin set as output. */ + +/* Bit 1 : Pin 1. */ +#define GPIO_DIR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_DIR_PIN1_Msk (0x1UL << GPIO_DIR_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_DIR_PIN1_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN1_Output (1UL) /*!< Pin set as output. */ + +/* Bit 0 : Pin 0. */ +#define GPIO_DIR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_DIR_PIN0_Msk (0x1UL << GPIO_DIR_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_DIR_PIN0_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIR_PIN0_Output (1UL) /*!< Pin set as output. */ + +/* Register: GPIO_DIRSET */ +/* Description: DIR set register. */ + +/* Bit 31 : Set as output pin 31. */ +#define GPIO_DIRSET_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_DIRSET_PIN31_Msk (0x1UL << GPIO_DIRSET_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_DIRSET_PIN31_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN31_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN31_Set (1UL) /*!< Set pin as output. */ + +/* Bit 30 : Set as output pin 30. */ +#define GPIO_DIRSET_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_DIRSET_PIN30_Msk (0x1UL << GPIO_DIRSET_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_DIRSET_PIN30_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN30_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN30_Set (1UL) /*!< Set pin as output. */ + +/* Bit 29 : Set as output pin 29. */ +#define GPIO_DIRSET_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_DIRSET_PIN29_Msk (0x1UL << GPIO_DIRSET_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_DIRSET_PIN29_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN29_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN29_Set (1UL) /*!< Set pin as output. */ + +/* Bit 28 : Set as output pin 28. */ +#define GPIO_DIRSET_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_DIRSET_PIN28_Msk (0x1UL << GPIO_DIRSET_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_DIRSET_PIN28_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN28_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN28_Set (1UL) /*!< Set pin as output. */ + +/* Bit 27 : Set as output pin 27. */ +#define GPIO_DIRSET_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_DIRSET_PIN27_Msk (0x1UL << GPIO_DIRSET_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_DIRSET_PIN27_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN27_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN27_Set (1UL) /*!< Set pin as output. */ + +/* Bit 26 : Set as output pin 26. */ +#define GPIO_DIRSET_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_DIRSET_PIN26_Msk (0x1UL << GPIO_DIRSET_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_DIRSET_PIN26_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN26_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN26_Set (1UL) /*!< Set pin as output. */ + +/* Bit 25 : Set as output pin 25. */ +#define GPIO_DIRSET_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_DIRSET_PIN25_Msk (0x1UL << GPIO_DIRSET_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_DIRSET_PIN25_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN25_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN25_Set (1UL) /*!< Set pin as output. */ + +/* Bit 24 : Set as output pin 24. */ +#define GPIO_DIRSET_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_DIRSET_PIN24_Msk (0x1UL << GPIO_DIRSET_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_DIRSET_PIN24_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN24_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN24_Set (1UL) /*!< Set pin as output. */ + +/* Bit 23 : Set as output pin 23. */ +#define GPIO_DIRSET_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_DIRSET_PIN23_Msk (0x1UL << GPIO_DIRSET_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_DIRSET_PIN23_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN23_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN23_Set (1UL) /*!< Set pin as output. */ + +/* Bit 22 : Set as output pin 22. */ +#define GPIO_DIRSET_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_DIRSET_PIN22_Msk (0x1UL << GPIO_DIRSET_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_DIRSET_PIN22_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN22_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN22_Set (1UL) /*!< Set pin as output. */ + +/* Bit 21 : Set as output pin 21. */ +#define GPIO_DIRSET_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_DIRSET_PIN21_Msk (0x1UL << GPIO_DIRSET_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_DIRSET_PIN21_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN21_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN21_Set (1UL) /*!< Set pin as output. */ + +/* Bit 20 : Set as output pin 20. */ +#define GPIO_DIRSET_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_DIRSET_PIN20_Msk (0x1UL << GPIO_DIRSET_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_DIRSET_PIN20_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN20_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN20_Set (1UL) /*!< Set pin as output. */ + +/* Bit 19 : Set as output pin 19. */ +#define GPIO_DIRSET_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_DIRSET_PIN19_Msk (0x1UL << GPIO_DIRSET_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_DIRSET_PIN19_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN19_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN19_Set (1UL) /*!< Set pin as output. */ + +/* Bit 18 : Set as output pin 18. */ +#define GPIO_DIRSET_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_DIRSET_PIN18_Msk (0x1UL << GPIO_DIRSET_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_DIRSET_PIN18_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN18_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN18_Set (1UL) /*!< Set pin as output. */ + +/* Bit 17 : Set as output pin 17. */ +#define GPIO_DIRSET_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_DIRSET_PIN17_Msk (0x1UL << GPIO_DIRSET_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_DIRSET_PIN17_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN17_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN17_Set (1UL) /*!< Set pin as output. */ + +/* Bit 16 : Set as output pin 16. */ +#define GPIO_DIRSET_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_DIRSET_PIN16_Msk (0x1UL << GPIO_DIRSET_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_DIRSET_PIN16_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN16_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN16_Set (1UL) /*!< Set pin as output. */ + +/* Bit 15 : Set as output pin 15. */ +#define GPIO_DIRSET_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_DIRSET_PIN15_Msk (0x1UL << GPIO_DIRSET_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_DIRSET_PIN15_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN15_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN15_Set (1UL) /*!< Set pin as output. */ + +/* Bit 14 : Set as output pin 14. */ +#define GPIO_DIRSET_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_DIRSET_PIN14_Msk (0x1UL << GPIO_DIRSET_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_DIRSET_PIN14_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN14_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN14_Set (1UL) /*!< Set pin as output. */ + +/* Bit 13 : Set as output pin 13. */ +#define GPIO_DIRSET_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_DIRSET_PIN13_Msk (0x1UL << GPIO_DIRSET_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_DIRSET_PIN13_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN13_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN13_Set (1UL) /*!< Set pin as output. */ + +/* Bit 12 : Set as output pin 12. */ +#define GPIO_DIRSET_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_DIRSET_PIN12_Msk (0x1UL << GPIO_DIRSET_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_DIRSET_PIN12_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN12_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN12_Set (1UL) /*!< Set pin as output. */ + +/* Bit 11 : Set as output pin 11. */ +#define GPIO_DIRSET_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_DIRSET_PIN11_Msk (0x1UL << GPIO_DIRSET_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_DIRSET_PIN11_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN11_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN11_Set (1UL) /*!< Set pin as output. */ + +/* Bit 10 : Set as output pin 10. */ +#define GPIO_DIRSET_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_DIRSET_PIN10_Msk (0x1UL << GPIO_DIRSET_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_DIRSET_PIN10_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN10_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN10_Set (1UL) /*!< Set pin as output. */ + +/* Bit 9 : Set as output pin 9. */ +#define GPIO_DIRSET_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_DIRSET_PIN9_Msk (0x1UL << GPIO_DIRSET_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_DIRSET_PIN9_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN9_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN9_Set (1UL) /*!< Set pin as output. */ + +/* Bit 8 : Set as output pin 8. */ +#define GPIO_DIRSET_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_DIRSET_PIN8_Msk (0x1UL << GPIO_DIRSET_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_DIRSET_PIN8_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN8_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN8_Set (1UL) /*!< Set pin as output. */ + +/* Bit 7 : Set as output pin 7. */ +#define GPIO_DIRSET_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_DIRSET_PIN7_Msk (0x1UL << GPIO_DIRSET_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_DIRSET_PIN7_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN7_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN7_Set (1UL) /*!< Set pin as output. */ + +/* Bit 6 : Set as output pin 6. */ +#define GPIO_DIRSET_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_DIRSET_PIN6_Msk (0x1UL << GPIO_DIRSET_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_DIRSET_PIN6_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN6_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN6_Set (1UL) /*!< Set pin as output. */ + +/* Bit 5 : Set as output pin 5. */ +#define GPIO_DIRSET_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_DIRSET_PIN5_Msk (0x1UL << GPIO_DIRSET_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_DIRSET_PIN5_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN5_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN5_Set (1UL) /*!< Set pin as output. */ + +/* Bit 4 : Set as output pin 4. */ +#define GPIO_DIRSET_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_DIRSET_PIN4_Msk (0x1UL << GPIO_DIRSET_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_DIRSET_PIN4_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN4_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN4_Set (1UL) /*!< Set pin as output. */ + +/* Bit 3 : Set as output pin 3. */ +#define GPIO_DIRSET_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_DIRSET_PIN3_Msk (0x1UL << GPIO_DIRSET_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_DIRSET_PIN3_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN3_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN3_Set (1UL) /*!< Set pin as output. */ + +/* Bit 2 : Set as output pin 2. */ +#define GPIO_DIRSET_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_DIRSET_PIN2_Msk (0x1UL << GPIO_DIRSET_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_DIRSET_PIN2_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN2_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN2_Set (1UL) /*!< Set pin as output. */ + +/* Bit 1 : Set as output pin 1. */ +#define GPIO_DIRSET_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_DIRSET_PIN1_Msk (0x1UL << GPIO_DIRSET_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_DIRSET_PIN1_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN1_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN1_Set (1UL) /*!< Set pin as output. */ + +/* Bit 0 : Set as output pin 0. */ +#define GPIO_DIRSET_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_DIRSET_PIN0_Msk (0x1UL << GPIO_DIRSET_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_DIRSET_PIN0_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRSET_PIN0_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRSET_PIN0_Set (1UL) /*!< Set pin as output. */ + +/* Register: GPIO_DIRCLR */ +/* Description: DIR clear register. */ + +/* Bit 31 : Set as input pin 31. */ +#define GPIO_DIRCLR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */ +#define GPIO_DIRCLR_PIN31_Msk (0x1UL << GPIO_DIRCLR_PIN31_Pos) /*!< Bit mask of PIN31 field. */ +#define GPIO_DIRCLR_PIN31_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN31_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN31_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 30 : Set as input pin 30. */ +#define GPIO_DIRCLR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */ +#define GPIO_DIRCLR_PIN30_Msk (0x1UL << GPIO_DIRCLR_PIN30_Pos) /*!< Bit mask of PIN30 field. */ +#define GPIO_DIRCLR_PIN30_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN30_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN30_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 29 : Set as input pin 29. */ +#define GPIO_DIRCLR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */ +#define GPIO_DIRCLR_PIN29_Msk (0x1UL << GPIO_DIRCLR_PIN29_Pos) /*!< Bit mask of PIN29 field. */ +#define GPIO_DIRCLR_PIN29_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN29_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN29_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 28 : Set as input pin 28. */ +#define GPIO_DIRCLR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */ +#define GPIO_DIRCLR_PIN28_Msk (0x1UL << GPIO_DIRCLR_PIN28_Pos) /*!< Bit mask of PIN28 field. */ +#define GPIO_DIRCLR_PIN28_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN28_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN28_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 27 : Set as input pin 27. */ +#define GPIO_DIRCLR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */ +#define GPIO_DIRCLR_PIN27_Msk (0x1UL << GPIO_DIRCLR_PIN27_Pos) /*!< Bit mask of PIN27 field. */ +#define GPIO_DIRCLR_PIN27_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN27_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN27_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 26 : Set as input pin 26. */ +#define GPIO_DIRCLR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */ +#define GPIO_DIRCLR_PIN26_Msk (0x1UL << GPIO_DIRCLR_PIN26_Pos) /*!< Bit mask of PIN26 field. */ +#define GPIO_DIRCLR_PIN26_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN26_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN26_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 25 : Set as input pin 25. */ +#define GPIO_DIRCLR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */ +#define GPIO_DIRCLR_PIN25_Msk (0x1UL << GPIO_DIRCLR_PIN25_Pos) /*!< Bit mask of PIN25 field. */ +#define GPIO_DIRCLR_PIN25_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN25_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN25_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 24 : Set as input pin 24. */ +#define GPIO_DIRCLR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */ +#define GPIO_DIRCLR_PIN24_Msk (0x1UL << GPIO_DIRCLR_PIN24_Pos) /*!< Bit mask of PIN24 field. */ +#define GPIO_DIRCLR_PIN24_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN24_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN24_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 23 : Set as input pin 23. */ +#define GPIO_DIRCLR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */ +#define GPIO_DIRCLR_PIN23_Msk (0x1UL << GPIO_DIRCLR_PIN23_Pos) /*!< Bit mask of PIN23 field. */ +#define GPIO_DIRCLR_PIN23_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN23_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN23_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 22 : Set as input pin 22. */ +#define GPIO_DIRCLR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */ +#define GPIO_DIRCLR_PIN22_Msk (0x1UL << GPIO_DIRCLR_PIN22_Pos) /*!< Bit mask of PIN22 field. */ +#define GPIO_DIRCLR_PIN22_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN22_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN22_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 21 : Set as input pin 21. */ +#define GPIO_DIRCLR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */ +#define GPIO_DIRCLR_PIN21_Msk (0x1UL << GPIO_DIRCLR_PIN21_Pos) /*!< Bit mask of PIN21 field. */ +#define GPIO_DIRCLR_PIN21_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN21_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN21_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 20 : Set as input pin 20. */ +#define GPIO_DIRCLR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */ +#define GPIO_DIRCLR_PIN20_Msk (0x1UL << GPIO_DIRCLR_PIN20_Pos) /*!< Bit mask of PIN20 field. */ +#define GPIO_DIRCLR_PIN20_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN20_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN20_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 19 : Set as input pin 19. */ +#define GPIO_DIRCLR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */ +#define GPIO_DIRCLR_PIN19_Msk (0x1UL << GPIO_DIRCLR_PIN19_Pos) /*!< Bit mask of PIN19 field. */ +#define GPIO_DIRCLR_PIN19_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN19_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN19_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 18 : Set as input pin 18. */ +#define GPIO_DIRCLR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */ +#define GPIO_DIRCLR_PIN18_Msk (0x1UL << GPIO_DIRCLR_PIN18_Pos) /*!< Bit mask of PIN18 field. */ +#define GPIO_DIRCLR_PIN18_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN18_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN18_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 17 : Set as input pin 17. */ +#define GPIO_DIRCLR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */ +#define GPIO_DIRCLR_PIN17_Msk (0x1UL << GPIO_DIRCLR_PIN17_Pos) /*!< Bit mask of PIN17 field. */ +#define GPIO_DIRCLR_PIN17_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN17_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN17_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 16 : Set as input pin 16. */ +#define GPIO_DIRCLR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */ +#define GPIO_DIRCLR_PIN16_Msk (0x1UL << GPIO_DIRCLR_PIN16_Pos) /*!< Bit mask of PIN16 field. */ +#define GPIO_DIRCLR_PIN16_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN16_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN16_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 15 : Set as input pin 15. */ +#define GPIO_DIRCLR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */ +#define GPIO_DIRCLR_PIN15_Msk (0x1UL << GPIO_DIRCLR_PIN15_Pos) /*!< Bit mask of PIN15 field. */ +#define GPIO_DIRCLR_PIN15_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN15_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN15_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 14 : Set as input pin 14. */ +#define GPIO_DIRCLR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */ +#define GPIO_DIRCLR_PIN14_Msk (0x1UL << GPIO_DIRCLR_PIN14_Pos) /*!< Bit mask of PIN14 field. */ +#define GPIO_DIRCLR_PIN14_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN14_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN14_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 13 : Set as input pin 13. */ +#define GPIO_DIRCLR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */ +#define GPIO_DIRCLR_PIN13_Msk (0x1UL << GPIO_DIRCLR_PIN13_Pos) /*!< Bit mask of PIN13 field. */ +#define GPIO_DIRCLR_PIN13_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN13_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN13_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 12 : Set as input pin 12. */ +#define GPIO_DIRCLR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */ +#define GPIO_DIRCLR_PIN12_Msk (0x1UL << GPIO_DIRCLR_PIN12_Pos) /*!< Bit mask of PIN12 field. */ +#define GPIO_DIRCLR_PIN12_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN12_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN12_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 11 : Set as input pin 11. */ +#define GPIO_DIRCLR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */ +#define GPIO_DIRCLR_PIN11_Msk (0x1UL << GPIO_DIRCLR_PIN11_Pos) /*!< Bit mask of PIN11 field. */ +#define GPIO_DIRCLR_PIN11_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN11_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN11_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 10 : Set as input pin 10. */ +#define GPIO_DIRCLR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */ +#define GPIO_DIRCLR_PIN10_Msk (0x1UL << GPIO_DIRCLR_PIN10_Pos) /*!< Bit mask of PIN10 field. */ +#define GPIO_DIRCLR_PIN10_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN10_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN10_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 9 : Set as input pin 9. */ +#define GPIO_DIRCLR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */ +#define GPIO_DIRCLR_PIN9_Msk (0x1UL << GPIO_DIRCLR_PIN9_Pos) /*!< Bit mask of PIN9 field. */ +#define GPIO_DIRCLR_PIN9_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN9_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN9_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 8 : Set as input pin 8. */ +#define GPIO_DIRCLR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */ +#define GPIO_DIRCLR_PIN8_Msk (0x1UL << GPIO_DIRCLR_PIN8_Pos) /*!< Bit mask of PIN8 field. */ +#define GPIO_DIRCLR_PIN8_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN8_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN8_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 7 : Set as input pin 7. */ +#define GPIO_DIRCLR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */ +#define GPIO_DIRCLR_PIN7_Msk (0x1UL << GPIO_DIRCLR_PIN7_Pos) /*!< Bit mask of PIN7 field. */ +#define GPIO_DIRCLR_PIN7_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN7_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN7_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 6 : Set as input pin 6. */ +#define GPIO_DIRCLR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */ +#define GPIO_DIRCLR_PIN6_Msk (0x1UL << GPIO_DIRCLR_PIN6_Pos) /*!< Bit mask of PIN6 field. */ +#define GPIO_DIRCLR_PIN6_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN6_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN6_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 5 : Set as input pin 5. */ +#define GPIO_DIRCLR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */ +#define GPIO_DIRCLR_PIN5_Msk (0x1UL << GPIO_DIRCLR_PIN5_Pos) /*!< Bit mask of PIN5 field. */ +#define GPIO_DIRCLR_PIN5_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN5_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN5_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 4 : Set as input pin 4. */ +#define GPIO_DIRCLR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */ +#define GPIO_DIRCLR_PIN4_Msk (0x1UL << GPIO_DIRCLR_PIN4_Pos) /*!< Bit mask of PIN4 field. */ +#define GPIO_DIRCLR_PIN4_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN4_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN4_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 3 : Set as input pin 3. */ +#define GPIO_DIRCLR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */ +#define GPIO_DIRCLR_PIN3_Msk (0x1UL << GPIO_DIRCLR_PIN3_Pos) /*!< Bit mask of PIN3 field. */ +#define GPIO_DIRCLR_PIN3_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN3_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN3_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 2 : Set as input pin 2. */ +#define GPIO_DIRCLR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */ +#define GPIO_DIRCLR_PIN2_Msk (0x1UL << GPIO_DIRCLR_PIN2_Pos) /*!< Bit mask of PIN2 field. */ +#define GPIO_DIRCLR_PIN2_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN2_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN2_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 1 : Set as input pin 1. */ +#define GPIO_DIRCLR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */ +#define GPIO_DIRCLR_PIN1_Msk (0x1UL << GPIO_DIRCLR_PIN1_Pos) /*!< Bit mask of PIN1 field. */ +#define GPIO_DIRCLR_PIN1_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN1_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN1_Clear (1UL) /*!< Set pin as input. */ + +/* Bit 0 : Set as input pin 0. */ +#define GPIO_DIRCLR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */ +#define GPIO_DIRCLR_PIN0_Msk (0x1UL << GPIO_DIRCLR_PIN0_Pos) /*!< Bit mask of PIN0 field. */ +#define GPIO_DIRCLR_PIN0_Input (0UL) /*!< Pin set as input. */ +#define GPIO_DIRCLR_PIN0_Output (1UL) /*!< Pin set as output. */ +#define GPIO_DIRCLR_PIN0_Clear (1UL) /*!< Set pin as input. */ + +/* Register: GPIO_PIN_CNF */ +/* Description: Configuration of GPIO pins. */ + +/* Bits 17..16 : Pin sensing mechanism. */ +#define GPIO_PIN_CNF_SENSE_Pos (16UL) /*!< Position of SENSE field. */ +#define GPIO_PIN_CNF_SENSE_Msk (0x3UL << GPIO_PIN_CNF_SENSE_Pos) /*!< Bit mask of SENSE field. */ +#define GPIO_PIN_CNF_SENSE_Disabled (0x00UL) /*!< Disabled. */ +#define GPIO_PIN_CNF_SENSE_High (0x02UL) /*!< Wakeup on high level. */ +#define GPIO_PIN_CNF_SENSE_Low (0x03UL) /*!< Wakeup on low level. */ + +/* Bits 10..8 : Drive configuration. */ +#define GPIO_PIN_CNF_DRIVE_Pos (8UL) /*!< Position of DRIVE field. */ +#define GPIO_PIN_CNF_DRIVE_Msk (0x7UL << GPIO_PIN_CNF_DRIVE_Pos) /*!< Bit mask of DRIVE field. */ +#define GPIO_PIN_CNF_DRIVE_S0S1 (0x00UL) /*!< Standard '0', Standard '1'. */ +#define GPIO_PIN_CNF_DRIVE_H0S1 (0x01UL) /*!< High '0', Standard '1'. */ +#define GPIO_PIN_CNF_DRIVE_S0H1 (0x02UL) /*!< Standard '0', High '1'. */ +#define GPIO_PIN_CNF_DRIVE_H0H1 (0x03UL) /*!< High '0', High '1'. */ +#define GPIO_PIN_CNF_DRIVE_D0S1 (0x04UL) /*!< Disconnected '0', Standard '1'. */ +#define GPIO_PIN_CNF_DRIVE_D0H1 (0x05UL) /*!< Disconnected '0', High '1'. */ +#define GPIO_PIN_CNF_DRIVE_S0D1 (0x06UL) /*!< Standard '0', Disconnected '1'. */ +#define GPIO_PIN_CNF_DRIVE_H0D1 (0x07UL) /*!< High '0', Disconnected '1'. */ + +/* Bits 3..2 : Pull-up or -down configuration. */ +#define GPIO_PIN_CNF_PULL_Pos (2UL) /*!< Position of PULL field. */ +#define GPIO_PIN_CNF_PULL_Msk (0x3UL << GPIO_PIN_CNF_PULL_Pos) /*!< Bit mask of PULL field. */ +#define GPIO_PIN_CNF_PULL_Disabled (0x00UL) /*!< No pull. */ +#define GPIO_PIN_CNF_PULL_Pulldown (0x01UL) /*!< Pulldown on pin. */ +#define GPIO_PIN_CNF_PULL_Pullup (0x03UL) /*!< Pullup on pin. */ + +/* Bit 1 : Connect or disconnect input path. */ +#define GPIO_PIN_CNF_INPUT_Pos (1UL) /*!< Position of INPUT field. */ +#define GPIO_PIN_CNF_INPUT_Msk (0x1UL << GPIO_PIN_CNF_INPUT_Pos) /*!< Bit mask of INPUT field. */ +#define GPIO_PIN_CNF_INPUT_Connect (0UL) /*!< Connect input pin. */ +#define GPIO_PIN_CNF_INPUT_Disconnect (1UL) /*!< Disconnect input pin. */ + +/* Bit 0 : Pin direction. */ +#define GPIO_PIN_CNF_DIR_Pos (0UL) /*!< Position of DIR field. */ +#define GPIO_PIN_CNF_DIR_Msk (0x1UL << GPIO_PIN_CNF_DIR_Pos) /*!< Bit mask of DIR field. */ +#define GPIO_PIN_CNF_DIR_Input (0UL) /*!< Configure pin as an input pin. */ +#define GPIO_PIN_CNF_DIR_Output (1UL) /*!< Configure pin as an output pin. */ + + +/* Peripheral: GPIOTE */ +/* Description: GPIO tasks and events. */ + +/* Register: GPIOTE_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 31 : Enable interrupt on PORT event. */ +#define GPIOTE_INTENSET_PORT_Pos (31UL) /*!< Position of PORT field. */ +#define GPIOTE_INTENSET_PORT_Msk (0x1UL << GPIOTE_INTENSET_PORT_Pos) /*!< Bit mask of PORT field. */ +#define GPIOTE_INTENSET_PORT_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENSET_PORT_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENSET_PORT_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 3 : Enable interrupt on IN[3] event. */ +#define GPIOTE_INTENSET_IN3_Pos (3UL) /*!< Position of IN3 field. */ +#define GPIOTE_INTENSET_IN3_Msk (0x1UL << GPIOTE_INTENSET_IN3_Pos) /*!< Bit mask of IN3 field. */ +#define GPIOTE_INTENSET_IN3_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENSET_IN3_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENSET_IN3_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 2 : Enable interrupt on IN[2] event. */ +#define GPIOTE_INTENSET_IN2_Pos (2UL) /*!< Position of IN2 field. */ +#define GPIOTE_INTENSET_IN2_Msk (0x1UL << GPIOTE_INTENSET_IN2_Pos) /*!< Bit mask of IN2 field. */ +#define GPIOTE_INTENSET_IN2_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENSET_IN2_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENSET_IN2_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on IN[1] event. */ +#define GPIOTE_INTENSET_IN1_Pos (1UL) /*!< Position of IN1 field. */ +#define GPIOTE_INTENSET_IN1_Msk (0x1UL << GPIOTE_INTENSET_IN1_Pos) /*!< Bit mask of IN1 field. */ +#define GPIOTE_INTENSET_IN1_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENSET_IN1_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENSET_IN1_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on IN[0] event. */ +#define GPIOTE_INTENSET_IN0_Pos (0UL) /*!< Position of IN0 field. */ +#define GPIOTE_INTENSET_IN0_Msk (0x1UL << GPIOTE_INTENSET_IN0_Pos) /*!< Bit mask of IN0 field. */ +#define GPIOTE_INTENSET_IN0_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENSET_IN0_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENSET_IN0_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: GPIOTE_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 31 : Disable interrupt on PORT event. */ +#define GPIOTE_INTENCLR_PORT_Pos (31UL) /*!< Position of PORT field. */ +#define GPIOTE_INTENCLR_PORT_Msk (0x1UL << GPIOTE_INTENCLR_PORT_Pos) /*!< Bit mask of PORT field. */ +#define GPIOTE_INTENCLR_PORT_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENCLR_PORT_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENCLR_PORT_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 3 : Disable interrupt on IN[3] event. */ +#define GPIOTE_INTENCLR_IN3_Pos (3UL) /*!< Position of IN3 field. */ +#define GPIOTE_INTENCLR_IN3_Msk (0x1UL << GPIOTE_INTENCLR_IN3_Pos) /*!< Bit mask of IN3 field. */ +#define GPIOTE_INTENCLR_IN3_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENCLR_IN3_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENCLR_IN3_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 2 : Disable interrupt on IN[2] event. */ +#define GPIOTE_INTENCLR_IN2_Pos (2UL) /*!< Position of IN2 field. */ +#define GPIOTE_INTENCLR_IN2_Msk (0x1UL << GPIOTE_INTENCLR_IN2_Pos) /*!< Bit mask of IN2 field. */ +#define GPIOTE_INTENCLR_IN2_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENCLR_IN2_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENCLR_IN2_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on IN[1] event. */ +#define GPIOTE_INTENCLR_IN1_Pos (1UL) /*!< Position of IN1 field. */ +#define GPIOTE_INTENCLR_IN1_Msk (0x1UL << GPIOTE_INTENCLR_IN1_Pos) /*!< Bit mask of IN1 field. */ +#define GPIOTE_INTENCLR_IN1_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENCLR_IN1_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENCLR_IN1_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on IN[0] event. */ +#define GPIOTE_INTENCLR_IN0_Pos (0UL) /*!< Position of IN0 field. */ +#define GPIOTE_INTENCLR_IN0_Msk (0x1UL << GPIOTE_INTENCLR_IN0_Pos) /*!< Bit mask of IN0 field. */ +#define GPIOTE_INTENCLR_IN0_Disabled (0UL) /*!< Interrupt disabled. */ +#define GPIOTE_INTENCLR_IN0_Enabled (1UL) /*!< Interrupt enabled. */ +#define GPIOTE_INTENCLR_IN0_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: GPIOTE_CONFIG */ +/* Description: Channel configuration registers. */ + +/* Bit 20 : Initial value of the output when the GPIOTE channel is configured as a Task. */ +#define GPIOTE_CONFIG_OUTINIT_Pos (20UL) /*!< Position of OUTINIT field. */ +#define GPIOTE_CONFIG_OUTINIT_Msk (0x1UL << GPIOTE_CONFIG_OUTINIT_Pos) /*!< Bit mask of OUTINIT field. */ +#define GPIOTE_CONFIG_OUTINIT_Low (0UL) /*!< Initial low output when in task mode. */ +#define GPIOTE_CONFIG_OUTINIT_High (1UL) /*!< Initial high output when in task mode. */ + +/* Bits 17..16 : Effects on output when in Task mode, or events on input that generates an event. */ +#define GPIOTE_CONFIG_POLARITY_Pos (16UL) /*!< Position of POLARITY field. */ +#define GPIOTE_CONFIG_POLARITY_Msk (0x3UL << GPIOTE_CONFIG_POLARITY_Pos) /*!< Bit mask of POLARITY field. */ +#define GPIOTE_CONFIG_POLARITY_LoToHi (0x01UL) /*!< Low to high. */ +#define GPIOTE_CONFIG_POLARITY_HiToLo (0x02UL) /*!< High to low. */ +#define GPIOTE_CONFIG_POLARITY_Toggle (0x03UL) /*!< Toggle. */ + +/* Bits 12..8 : Pin select. */ +#define GPIOTE_CONFIG_PSEL_Pos (8UL) /*!< Position of PSEL field. */ +#define GPIOTE_CONFIG_PSEL_Msk (0x1FUL << GPIOTE_CONFIG_PSEL_Pos) /*!< Bit mask of PSEL field. */ + +/* Bits 1..0 : Mode */ +#define GPIOTE_CONFIG_MODE_Pos (0UL) /*!< Position of MODE field. */ +#define GPIOTE_CONFIG_MODE_Msk (0x3UL << GPIOTE_CONFIG_MODE_Pos) /*!< Bit mask of MODE field. */ +#define GPIOTE_CONFIG_MODE_Disabled (0x00UL) /*!< Disabled. */ +#define GPIOTE_CONFIG_MODE_Event (0x01UL) /*!< Channel configure in event mode. */ +#define GPIOTE_CONFIG_MODE_Task (0x03UL) /*!< Channel configure in task mode. */ + +/* Register: GPIOTE_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define GPIOTE_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define GPIOTE_POWER_POWER_Msk (0x1UL << GPIOTE_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define GPIOTE_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define GPIOTE_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: LPCOMP */ +/* Description: Wakeup Comparator. */ + +/* Register: LPCOMP_SHORTS */ +/* Description: Shortcut for the LPCOMP. */ + +/* Bit 4 : Short-cut between CROSS event and STOP task. */ +#define LPCOMP_SHORTS_CROSS_STOP_Pos (4UL) /*!< Position of CROSS_STOP field. */ +#define LPCOMP_SHORTS_CROSS_STOP_Msk (0x1UL << LPCOMP_SHORTS_CROSS_STOP_Pos) /*!< Bit mask of CROSS_STOP field. */ +#define LPCOMP_SHORTS_CROSS_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define LPCOMP_SHORTS_CROSS_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 3 : Short-cut between UP event and STOP task. */ +#define LPCOMP_SHORTS_UP_STOP_Pos (3UL) /*!< Position of UP_STOP field. */ +#define LPCOMP_SHORTS_UP_STOP_Msk (0x1UL << LPCOMP_SHORTS_UP_STOP_Pos) /*!< Bit mask of UP_STOP field. */ +#define LPCOMP_SHORTS_UP_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define LPCOMP_SHORTS_UP_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 2 : Short-cut between DOWN event and STOP task. */ +#define LPCOMP_SHORTS_DOWN_STOP_Pos (2UL) /*!< Position of DOWN_STOP field. */ +#define LPCOMP_SHORTS_DOWN_STOP_Msk (0x1UL << LPCOMP_SHORTS_DOWN_STOP_Pos) /*!< Bit mask of DOWN_STOP field. */ +#define LPCOMP_SHORTS_DOWN_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define LPCOMP_SHORTS_DOWN_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 1 : Short-cut between RADY event and STOP task. */ +#define LPCOMP_SHORTS_READY_STOP_Pos (1UL) /*!< Position of READY_STOP field. */ +#define LPCOMP_SHORTS_READY_STOP_Msk (0x1UL << LPCOMP_SHORTS_READY_STOP_Pos) /*!< Bit mask of READY_STOP field. */ +#define LPCOMP_SHORTS_READY_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define LPCOMP_SHORTS_READY_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 0 : Short-cut between READY event and SAMPLE task. */ +#define LPCOMP_SHORTS_READY_SAMPLE_Pos (0UL) /*!< Position of READY_SAMPLE field. */ +#define LPCOMP_SHORTS_READY_SAMPLE_Msk (0x1UL << LPCOMP_SHORTS_READY_SAMPLE_Pos) /*!< Bit mask of READY_SAMPLE field. */ +#define LPCOMP_SHORTS_READY_SAMPLE_Disabled (0UL) /*!< Shortcut disabled. */ +#define LPCOMP_SHORTS_READY_SAMPLE_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: LPCOMP_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 3 : Enable interrupt on CROSS event. */ +#define LPCOMP_INTENSET_CROSS_Pos (3UL) /*!< Position of CROSS field. */ +#define LPCOMP_INTENSET_CROSS_Msk (0x1UL << LPCOMP_INTENSET_CROSS_Pos) /*!< Bit mask of CROSS field. */ +#define LPCOMP_INTENSET_CROSS_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENSET_CROSS_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENSET_CROSS_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 2 : Enable interrupt on UP event. */ +#define LPCOMP_INTENSET_UP_Pos (2UL) /*!< Position of UP field. */ +#define LPCOMP_INTENSET_UP_Msk (0x1UL << LPCOMP_INTENSET_UP_Pos) /*!< Bit mask of UP field. */ +#define LPCOMP_INTENSET_UP_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENSET_UP_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENSET_UP_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on DOWN event. */ +#define LPCOMP_INTENSET_DOWN_Pos (1UL) /*!< Position of DOWN field. */ +#define LPCOMP_INTENSET_DOWN_Msk (0x1UL << LPCOMP_INTENSET_DOWN_Pos) /*!< Bit mask of DOWN field. */ +#define LPCOMP_INTENSET_DOWN_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENSET_DOWN_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENSET_DOWN_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on READY event. */ +#define LPCOMP_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */ +#define LPCOMP_INTENSET_READY_Msk (0x1UL << LPCOMP_INTENSET_READY_Pos) /*!< Bit mask of READY field. */ +#define LPCOMP_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: LPCOMP_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 3 : Disable interrupt on CROSS event. */ +#define LPCOMP_INTENCLR_CROSS_Pos (3UL) /*!< Position of CROSS field. */ +#define LPCOMP_INTENCLR_CROSS_Msk (0x1UL << LPCOMP_INTENCLR_CROSS_Pos) /*!< Bit mask of CROSS field. */ +#define LPCOMP_INTENCLR_CROSS_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENCLR_CROSS_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENCLR_CROSS_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 2 : Disable interrupt on UP event. */ +#define LPCOMP_INTENCLR_UP_Pos (2UL) /*!< Position of UP field. */ +#define LPCOMP_INTENCLR_UP_Msk (0x1UL << LPCOMP_INTENCLR_UP_Pos) /*!< Bit mask of UP field. */ +#define LPCOMP_INTENCLR_UP_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENCLR_UP_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENCLR_UP_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on DOWN event. */ +#define LPCOMP_INTENCLR_DOWN_Pos (1UL) /*!< Position of DOWN field. */ +#define LPCOMP_INTENCLR_DOWN_Msk (0x1UL << LPCOMP_INTENCLR_DOWN_Pos) /*!< Bit mask of DOWN field. */ +#define LPCOMP_INTENCLR_DOWN_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENCLR_DOWN_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENCLR_DOWN_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on READY event. */ +#define LPCOMP_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */ +#define LPCOMP_INTENCLR_READY_Msk (0x1UL << LPCOMP_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */ +#define LPCOMP_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define LPCOMP_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define LPCOMP_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: LPCOMP_RESULT */ +/* Description: Result of last compare. */ + +/* Bit 0 : Result of last compare. Decision point SAMPLE task. */ +#define LPCOMP_RESULT_RESULT_Pos (0UL) /*!< Position of RESULT field. */ +#define LPCOMP_RESULT_RESULT_Msk (0x1UL << LPCOMP_RESULT_RESULT_Pos) /*!< Bit mask of RESULT field. */ +#define LPCOMP_RESULT_RESULT_Bellow (0UL) /*!< Input voltage is bellow the reference threshold. */ +#define LPCOMP_RESULT_RESULT_Above (1UL) /*!< Input voltage is above the reference threshold. */ + +/* Register: LPCOMP_ENABLE */ +/* Description: Enable the LPCOMP. */ + +/* Bits 1..0 : Enable or disable LPCOMP. */ +#define LPCOMP_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define LPCOMP_ENABLE_ENABLE_Msk (0x3UL << LPCOMP_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define LPCOMP_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled LPCOMP. */ +#define LPCOMP_ENABLE_ENABLE_Enabled (0x01UL) /*!< Enable LPCOMP. */ + +/* Register: LPCOMP_PSEL */ +/* Description: Input pin select. */ + +/* Bits 2..0 : Analog input pin select. */ +#define LPCOMP_PSEL_PSEL_Pos (0UL) /*!< Position of PSEL field. */ +#define LPCOMP_PSEL_PSEL_Msk (0x7UL << LPCOMP_PSEL_PSEL_Pos) /*!< Bit mask of PSEL field. */ +#define LPCOMP_PSEL_PSEL_AnalogInput0 (0UL) /*!< Use analog input 0 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput1 (1UL) /*!< Use analog input 1 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput2 (2UL) /*!< Use analog input 2 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput3 (3UL) /*!< Use analog input 3 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput4 (4UL) /*!< Use analog input 4 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput5 (5UL) /*!< Use analog input 5 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput6 (6UL) /*!< Use analog input 6 as analog input. */ +#define LPCOMP_PSEL_PSEL_AnalogInput7 (7UL) /*!< Use analog input 7 as analog input. */ + +/* Register: LPCOMP_REFSEL */ +/* Description: Reference select. */ + +/* Bits 2..0 : Reference select. */ +#define LPCOMP_REFSEL_REFSEL_Pos (0UL) /*!< Position of REFSEL field. */ +#define LPCOMP_REFSEL_REFSEL_Msk (0x7UL << LPCOMP_REFSEL_REFSEL_Pos) /*!< Bit mask of REFSEL field. */ +#define LPCOMP_REFSEL_REFSEL_SupplyOneEighthPrescaling (0UL) /*!< Use analog supply with a 1/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_SupplyTwoEighthsPrescaling (1UL) /*!< Use analog supply with a 2/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_SupplyThreeEighthsPrescaling (2UL) /*!< Use analog supply with a 3/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_SupplyFourEighthsPrescaling (3UL) /*!< Use analog supply with a 4/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_SupplyFiveEighthsPrescaling (4UL) /*!< Use analog supply with a 5/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_SupplySixEighthsPrescaling (5UL) /*!< Use analog supply with a 6/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_SupplySevenEighthsPrescaling (6UL) /*!< Use analog supply with a 7/8 prescaler as reference. */ +#define LPCOMP_REFSEL_REFSEL_ARef (7UL) /*!< Use external analog reference as reference. */ + +/* Register: LPCOMP_EXTREFSEL */ +/* Description: External reference select. */ + +/* Bit 0 : External analog reference pin selection. */ +#define LPCOMP_EXTREFSEL_EXTREFSEL_Pos (0UL) /*!< Position of EXTREFSEL field. */ +#define LPCOMP_EXTREFSEL_EXTREFSEL_Msk (0x1UL << LPCOMP_EXTREFSEL_EXTREFSEL_Pos) /*!< Bit mask of EXTREFSEL field. */ +#define LPCOMP_EXTREFSEL_EXTREFSEL_AnalogReference0 (0UL) /*!< Use analog reference 0 as reference. */ +#define LPCOMP_EXTREFSEL_EXTREFSEL_AnalogReference1 (1UL) /*!< Use analog reference 1 as reference. */ + +/* Register: LPCOMP_ANADETECT */ +/* Description: Analog detect configuration. */ + +/* Bits 1..0 : Analog detect configuration. */ +#define LPCOMP_ANADETECT_ANADETECT_Pos (0UL) /*!< Position of ANADETECT field. */ +#define LPCOMP_ANADETECT_ANADETECT_Msk (0x3UL << LPCOMP_ANADETECT_ANADETECT_Pos) /*!< Bit mask of ANADETECT field. */ +#define LPCOMP_ANADETECT_ANADETECT_Cross (0UL) /*!< Generate ANADETEC on crossing, both upwards and downwards crossing. */ +#define LPCOMP_ANADETECT_ANADETECT_Up (1UL) /*!< Generate ANADETEC on upwards crossing only. */ +#define LPCOMP_ANADETECT_ANADETECT_Down (2UL) /*!< Generate ANADETEC on downwards crossing only. */ + +/* Register: LPCOMP_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define LPCOMP_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define LPCOMP_POWER_POWER_Msk (0x1UL << LPCOMP_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define LPCOMP_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define LPCOMP_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: MPU */ +/* Description: Memory Protection Unit. */ + +/* Register: MPU_PERR0 */ +/* Description: Configuration of peripherals in mpu regions. */ + +/* Bit 31 : PPI region configuration. */ +#define MPU_PERR0_PPI_Pos (31UL) /*!< Position of PPI field. */ +#define MPU_PERR0_PPI_Msk (0x1UL << MPU_PERR0_PPI_Pos) /*!< Bit mask of PPI field. */ +#define MPU_PERR0_PPI_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_PPI_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 30 : NVMC region configuration. */ +#define MPU_PERR0_NVMC_Pos (30UL) /*!< Position of NVMC field. */ +#define MPU_PERR0_NVMC_Msk (0x1UL << MPU_PERR0_NVMC_Pos) /*!< Bit mask of NVMC field. */ +#define MPU_PERR0_NVMC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_NVMC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 19 : LPCOMP_COMP region configuration. */ +#define MPU_PERR0_LPCOMP_COMP_Pos (19UL) /*!< Position of LPCOMP_COMP field. */ +#define MPU_PERR0_LPCOMP_COMP_Msk (0x1UL << MPU_PERR0_LPCOMP_COMP_Pos) /*!< Bit mask of LPCOMP_COMP field. */ +#define MPU_PERR0_LPCOMP_COMP_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_LPCOMP_COMP_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 18 : QDEC region configuration. */ +#define MPU_PERR0_QDEC_Pos (18UL) /*!< Position of QDEC field. */ +#define MPU_PERR0_QDEC_Msk (0x1UL << MPU_PERR0_QDEC_Pos) /*!< Bit mask of QDEC field. */ +#define MPU_PERR0_QDEC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_QDEC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 17 : RTC1 region configuration. */ +#define MPU_PERR0_RTC1_Pos (17UL) /*!< Position of RTC1 field. */ +#define MPU_PERR0_RTC1_Msk (0x1UL << MPU_PERR0_RTC1_Pos) /*!< Bit mask of RTC1 field. */ +#define MPU_PERR0_RTC1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_RTC1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 16 : WDT region configuration. */ +#define MPU_PERR0_WDT_Pos (16UL) /*!< Position of WDT field. */ +#define MPU_PERR0_WDT_Msk (0x1UL << MPU_PERR0_WDT_Pos) /*!< Bit mask of WDT field. */ +#define MPU_PERR0_WDT_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_WDT_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 15 : CCM and AAR region configuration. */ +#define MPU_PERR0_CCM_AAR_Pos (15UL) /*!< Position of CCM_AAR field. */ +#define MPU_PERR0_CCM_AAR_Msk (0x1UL << MPU_PERR0_CCM_AAR_Pos) /*!< Bit mask of CCM_AAR field. */ +#define MPU_PERR0_CCM_AAR_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_CCM_AAR_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 14 : ECB region configuration. */ +#define MPU_PERR0_ECB_Pos (14UL) /*!< Position of ECB field. */ +#define MPU_PERR0_ECB_Msk (0x1UL << MPU_PERR0_ECB_Pos) /*!< Bit mask of ECB field. */ +#define MPU_PERR0_ECB_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_ECB_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 13 : RNG region configuration. */ +#define MPU_PERR0_RNG_Pos (13UL) /*!< Position of RNG field. */ +#define MPU_PERR0_RNG_Msk (0x1UL << MPU_PERR0_RNG_Pos) /*!< Bit mask of RNG field. */ +#define MPU_PERR0_RNG_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_RNG_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 12 : TEMP region configuration. */ +#define MPU_PERR0_TEMP_Pos (12UL) /*!< Position of TEMP field. */ +#define MPU_PERR0_TEMP_Msk (0x1UL << MPU_PERR0_TEMP_Pos) /*!< Bit mask of TEMP field. */ +#define MPU_PERR0_TEMP_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_TEMP_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 11 : RTC0 region configuration. */ +#define MPU_PERR0_RTC0_Pos (11UL) /*!< Position of RTC0 field. */ +#define MPU_PERR0_RTC0_Msk (0x1UL << MPU_PERR0_RTC0_Pos) /*!< Bit mask of RTC0 field. */ +#define MPU_PERR0_RTC0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_RTC0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 10 : TIMER2 region configuration. */ +#define MPU_PERR0_TIMER2_Pos (10UL) /*!< Position of TIMER2 field. */ +#define MPU_PERR0_TIMER2_Msk (0x1UL << MPU_PERR0_TIMER2_Pos) /*!< Bit mask of TIMER2 field. */ +#define MPU_PERR0_TIMER2_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_TIMER2_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 9 : TIMER1 region configuration. */ +#define MPU_PERR0_TIMER1_Pos (9UL) /*!< Position of TIMER1 field. */ +#define MPU_PERR0_TIMER1_Msk (0x1UL << MPU_PERR0_TIMER1_Pos) /*!< Bit mask of TIMER1 field. */ +#define MPU_PERR0_TIMER1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_TIMER1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 8 : TIMER0 region configuration. */ +#define MPU_PERR0_TIMER0_Pos (8UL) /*!< Position of TIMER0 field. */ +#define MPU_PERR0_TIMER0_Msk (0x1UL << MPU_PERR0_TIMER0_Pos) /*!< Bit mask of TIMER0 field. */ +#define MPU_PERR0_TIMER0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_TIMER0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 7 : ADC region configuration. */ +#define MPU_PERR0_ADC_Pos (7UL) /*!< Position of ADC field. */ +#define MPU_PERR0_ADC_Msk (0x1UL << MPU_PERR0_ADC_Pos) /*!< Bit mask of ADC field. */ +#define MPU_PERR0_ADC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_ADC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 6 : GPIOTE region configuration. */ +#define MPU_PERR0_GPIOTE_Pos (6UL) /*!< Position of GPIOTE field. */ +#define MPU_PERR0_GPIOTE_Msk (0x1UL << MPU_PERR0_GPIOTE_Pos) /*!< Bit mask of GPIOTE field. */ +#define MPU_PERR0_GPIOTE_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_GPIOTE_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 4 : SPI1 and TWI1 region configuration. */ +#define MPU_PERR0_SPI1_TWI1_Pos (4UL) /*!< Position of SPI1_TWI1 field. */ +#define MPU_PERR0_SPI1_TWI1_Msk (0x1UL << MPU_PERR0_SPI1_TWI1_Pos) /*!< Bit mask of SPI1_TWI1 field. */ +#define MPU_PERR0_SPI1_TWI1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_SPI1_TWI1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 3 : SPI0 and TWI0 region configuration. */ +#define MPU_PERR0_SPI0_TWI0_Pos (3UL) /*!< Position of SPI0_TWI0 field. */ +#define MPU_PERR0_SPI0_TWI0_Msk (0x1UL << MPU_PERR0_SPI0_TWI0_Pos) /*!< Bit mask of SPI0_TWI0 field. */ +#define MPU_PERR0_SPI0_TWI0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_SPI0_TWI0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 2 : UART0 region configuration. */ +#define MPU_PERR0_UART0_Pos (2UL) /*!< Position of UART0 field. */ +#define MPU_PERR0_UART0_Msk (0x1UL << MPU_PERR0_UART0_Pos) /*!< Bit mask of UART0 field. */ +#define MPU_PERR0_UART0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_UART0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 1 : RADIO region configuration. */ +#define MPU_PERR0_RADIO_Pos (1UL) /*!< Position of RADIO field. */ +#define MPU_PERR0_RADIO_Msk (0x1UL << MPU_PERR0_RADIO_Pos) /*!< Bit mask of RADIO field. */ +#define MPU_PERR0_RADIO_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_RADIO_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Bit 0 : POWER_CLOCK region configuration. */ +#define MPU_PERR0_POWER_CLOCK_Pos (0UL) /*!< Position of POWER_CLOCK field. */ +#define MPU_PERR0_POWER_CLOCK_Msk (0x1UL << MPU_PERR0_POWER_CLOCK_Pos) /*!< Bit mask of POWER_CLOCK field. */ +#define MPU_PERR0_POWER_CLOCK_InRegion1 (0UL) /*!< Peripheral configured in region 1. */ +#define MPU_PERR0_POWER_CLOCK_InRegion0 (1UL) /*!< Peripheral configured in region 0. */ + +/* Register: MPU_PROTENSET0 */ +/* Description: Protection bit enable set register for low addresses. */ + +/* Bit 31 : Protection enable for region 31. */ +#define MPU_PROTENSET0_PROTREG31_Pos (31UL) /*!< Position of PROTREG31 field. */ +#define MPU_PROTENSET0_PROTREG31_Msk (0x1UL << MPU_PROTENSET0_PROTREG31_Pos) /*!< Bit mask of PROTREG31 field. */ +#define MPU_PROTENSET0_PROTREG31_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG31_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG31_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 30 : Protection enable for region 30. */ +#define MPU_PROTENSET0_PROTREG30_Pos (30UL) /*!< Position of PROTREG30 field. */ +#define MPU_PROTENSET0_PROTREG30_Msk (0x1UL << MPU_PROTENSET0_PROTREG30_Pos) /*!< Bit mask of PROTREG30 field. */ +#define MPU_PROTENSET0_PROTREG30_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG30_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG30_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 29 : Protection enable for region 29. */ +#define MPU_PROTENSET0_PROTREG29_Pos (29UL) /*!< Position of PROTREG29 field. */ +#define MPU_PROTENSET0_PROTREG29_Msk (0x1UL << MPU_PROTENSET0_PROTREG29_Pos) /*!< Bit mask of PROTREG29 field. */ +#define MPU_PROTENSET0_PROTREG29_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG29_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG29_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 28 : Protection enable for region 28. */ +#define MPU_PROTENSET0_PROTREG28_Pos (28UL) /*!< Position of PROTREG28 field. */ +#define MPU_PROTENSET0_PROTREG28_Msk (0x1UL << MPU_PROTENSET0_PROTREG28_Pos) /*!< Bit mask of PROTREG28 field. */ +#define MPU_PROTENSET0_PROTREG28_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG28_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG28_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 27 : Protection enable for region 27. */ +#define MPU_PROTENSET0_PROTREG27_Pos (27UL) /*!< Position of PROTREG27 field. */ +#define MPU_PROTENSET0_PROTREG27_Msk (0x1UL << MPU_PROTENSET0_PROTREG27_Pos) /*!< Bit mask of PROTREG27 field. */ +#define MPU_PROTENSET0_PROTREG27_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG27_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG27_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 26 : Protection enable for region 26. */ +#define MPU_PROTENSET0_PROTREG26_Pos (26UL) /*!< Position of PROTREG26 field. */ +#define MPU_PROTENSET0_PROTREG26_Msk (0x1UL << MPU_PROTENSET0_PROTREG26_Pos) /*!< Bit mask of PROTREG26 field. */ +#define MPU_PROTENSET0_PROTREG26_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG26_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG26_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 25 : Protection enable for region 25. */ +#define MPU_PROTENSET0_PROTREG25_Pos (25UL) /*!< Position of PROTREG25 field. */ +#define MPU_PROTENSET0_PROTREG25_Msk (0x1UL << MPU_PROTENSET0_PROTREG25_Pos) /*!< Bit mask of PROTREG25 field. */ +#define MPU_PROTENSET0_PROTREG25_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG25_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG25_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 24 : Protection enable for region 24. */ +#define MPU_PROTENSET0_PROTREG24_Pos (24UL) /*!< Position of PROTREG24 field. */ +#define MPU_PROTENSET0_PROTREG24_Msk (0x1UL << MPU_PROTENSET0_PROTREG24_Pos) /*!< Bit mask of PROTREG24 field. */ +#define MPU_PROTENSET0_PROTREG24_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG24_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG24_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 23 : Protection enable for region 23. */ +#define MPU_PROTENSET0_PROTREG23_Pos (23UL) /*!< Position of PROTREG23 field. */ +#define MPU_PROTENSET0_PROTREG23_Msk (0x1UL << MPU_PROTENSET0_PROTREG23_Pos) /*!< Bit mask of PROTREG23 field. */ +#define MPU_PROTENSET0_PROTREG23_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG23_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG23_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 22 : Protection enable for region 22. */ +#define MPU_PROTENSET0_PROTREG22_Pos (22UL) /*!< Position of PROTREG22 field. */ +#define MPU_PROTENSET0_PROTREG22_Msk (0x1UL << MPU_PROTENSET0_PROTREG22_Pos) /*!< Bit mask of PROTREG22 field. */ +#define MPU_PROTENSET0_PROTREG22_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG22_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG22_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 21 : Protection enable for region 21. */ +#define MPU_PROTENSET0_PROTREG21_Pos (21UL) /*!< Position of PROTREG21 field. */ +#define MPU_PROTENSET0_PROTREG21_Msk (0x1UL << MPU_PROTENSET0_PROTREG21_Pos) /*!< Bit mask of PROTREG21 field. */ +#define MPU_PROTENSET0_PROTREG21_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG21_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG21_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 20 : Protection enable for region 20. */ +#define MPU_PROTENSET0_PROTREG20_Pos (20UL) /*!< Position of PROTREG20 field. */ +#define MPU_PROTENSET0_PROTREG20_Msk (0x1UL << MPU_PROTENSET0_PROTREG20_Pos) /*!< Bit mask of PROTREG20 field. */ +#define MPU_PROTENSET0_PROTREG20_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG20_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG20_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 19 : Protection enable for region 19. */ +#define MPU_PROTENSET0_PROTREG19_Pos (19UL) /*!< Position of PROTREG19 field. */ +#define MPU_PROTENSET0_PROTREG19_Msk (0x1UL << MPU_PROTENSET0_PROTREG19_Pos) /*!< Bit mask of PROTREG19 field. */ +#define MPU_PROTENSET0_PROTREG19_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG19_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG19_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 18 : Protection enable for region 18. */ +#define MPU_PROTENSET0_PROTREG18_Pos (18UL) /*!< Position of PROTREG18 field. */ +#define MPU_PROTENSET0_PROTREG18_Msk (0x1UL << MPU_PROTENSET0_PROTREG18_Pos) /*!< Bit mask of PROTREG18 field. */ +#define MPU_PROTENSET0_PROTREG18_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG18_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG18_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 17 : Protection enable for region 17. */ +#define MPU_PROTENSET0_PROTREG17_Pos (17UL) /*!< Position of PROTREG17 field. */ +#define MPU_PROTENSET0_PROTREG17_Msk (0x1UL << MPU_PROTENSET0_PROTREG17_Pos) /*!< Bit mask of PROTREG17 field. */ +#define MPU_PROTENSET0_PROTREG17_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG17_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG17_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 16 : Protection enable for region 16. */ +#define MPU_PROTENSET0_PROTREG16_Pos (16UL) /*!< Position of PROTREG16 field. */ +#define MPU_PROTENSET0_PROTREG16_Msk (0x1UL << MPU_PROTENSET0_PROTREG16_Pos) /*!< Bit mask of PROTREG16 field. */ +#define MPU_PROTENSET0_PROTREG16_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG16_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG16_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 15 : Protection enable for region 15. */ +#define MPU_PROTENSET0_PROTREG15_Pos (15UL) /*!< Position of PROTREG15 field. */ +#define MPU_PROTENSET0_PROTREG15_Msk (0x1UL << MPU_PROTENSET0_PROTREG15_Pos) /*!< Bit mask of PROTREG15 field. */ +#define MPU_PROTENSET0_PROTREG15_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG15_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG15_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 14 : Protection enable for region 14. */ +#define MPU_PROTENSET0_PROTREG14_Pos (14UL) /*!< Position of PROTREG14 field. */ +#define MPU_PROTENSET0_PROTREG14_Msk (0x1UL << MPU_PROTENSET0_PROTREG14_Pos) /*!< Bit mask of PROTREG14 field. */ +#define MPU_PROTENSET0_PROTREG14_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG14_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG14_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 13 : Protection enable for region 13. */ +#define MPU_PROTENSET0_PROTREG13_Pos (13UL) /*!< Position of PROTREG13 field. */ +#define MPU_PROTENSET0_PROTREG13_Msk (0x1UL << MPU_PROTENSET0_PROTREG13_Pos) /*!< Bit mask of PROTREG13 field. */ +#define MPU_PROTENSET0_PROTREG13_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG13_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG13_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 12 : Protection enable for region 12. */ +#define MPU_PROTENSET0_PROTREG12_Pos (12UL) /*!< Position of PROTREG12 field. */ +#define MPU_PROTENSET0_PROTREG12_Msk (0x1UL << MPU_PROTENSET0_PROTREG12_Pos) /*!< Bit mask of PROTREG12 field. */ +#define MPU_PROTENSET0_PROTREG12_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG12_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG12_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 11 : Protection enable for region 11. */ +#define MPU_PROTENSET0_PROTREG11_Pos (11UL) /*!< Position of PROTREG11 field. */ +#define MPU_PROTENSET0_PROTREG11_Msk (0x1UL << MPU_PROTENSET0_PROTREG11_Pos) /*!< Bit mask of PROTREG11 field. */ +#define MPU_PROTENSET0_PROTREG11_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG11_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG11_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 10 : Protection enable for region 10. */ +#define MPU_PROTENSET0_PROTREG10_Pos (10UL) /*!< Position of PROTREG10 field. */ +#define MPU_PROTENSET0_PROTREG10_Msk (0x1UL << MPU_PROTENSET0_PROTREG10_Pos) /*!< Bit mask of PROTREG10 field. */ +#define MPU_PROTENSET0_PROTREG10_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG10_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG10_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 9 : Protection enable for region 9. */ +#define MPU_PROTENSET0_PROTREG9_Pos (9UL) /*!< Position of PROTREG9 field. */ +#define MPU_PROTENSET0_PROTREG9_Msk (0x1UL << MPU_PROTENSET0_PROTREG9_Pos) /*!< Bit mask of PROTREG9 field. */ +#define MPU_PROTENSET0_PROTREG9_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG9_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG9_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 8 : Protection enable for region 8. */ +#define MPU_PROTENSET0_PROTREG8_Pos (8UL) /*!< Position of PROTREG8 field. */ +#define MPU_PROTENSET0_PROTREG8_Msk (0x1UL << MPU_PROTENSET0_PROTREG8_Pos) /*!< Bit mask of PROTREG8 field. */ +#define MPU_PROTENSET0_PROTREG8_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG8_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG8_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 7 : Protection enable for region 7. */ +#define MPU_PROTENSET0_PROTREG7_Pos (7UL) /*!< Position of PROTREG7 field. */ +#define MPU_PROTENSET0_PROTREG7_Msk (0x1UL << MPU_PROTENSET0_PROTREG7_Pos) /*!< Bit mask of PROTREG7 field. */ +#define MPU_PROTENSET0_PROTREG7_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG7_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG7_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 6 : Protection enable for region 6. */ +#define MPU_PROTENSET0_PROTREG6_Pos (6UL) /*!< Position of PROTREG6 field. */ +#define MPU_PROTENSET0_PROTREG6_Msk (0x1UL << MPU_PROTENSET0_PROTREG6_Pos) /*!< Bit mask of PROTREG6 field. */ +#define MPU_PROTENSET0_PROTREG6_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG6_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG6_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 5 : Protection enable for region 5. */ +#define MPU_PROTENSET0_PROTREG5_Pos (5UL) /*!< Position of PROTREG5 field. */ +#define MPU_PROTENSET0_PROTREG5_Msk (0x1UL << MPU_PROTENSET0_PROTREG5_Pos) /*!< Bit mask of PROTREG5 field. */ +#define MPU_PROTENSET0_PROTREG5_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG5_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG5_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 4 : Protection enable for region 4. */ +#define MPU_PROTENSET0_PROTREG4_Pos (4UL) /*!< Position of PROTREG4 field. */ +#define MPU_PROTENSET0_PROTREG4_Msk (0x1UL << MPU_PROTENSET0_PROTREG4_Pos) /*!< Bit mask of PROTREG4 field. */ +#define MPU_PROTENSET0_PROTREG4_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG4_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG4_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 3 : Protection enable for region 3. */ +#define MPU_PROTENSET0_PROTREG3_Pos (3UL) /*!< Position of PROTREG3 field. */ +#define MPU_PROTENSET0_PROTREG3_Msk (0x1UL << MPU_PROTENSET0_PROTREG3_Pos) /*!< Bit mask of PROTREG3 field. */ +#define MPU_PROTENSET0_PROTREG3_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG3_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG3_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 2 : Protection enable for region 2. */ +#define MPU_PROTENSET0_PROTREG2_Pos (2UL) /*!< Position of PROTREG2 field. */ +#define MPU_PROTENSET0_PROTREG2_Msk (0x1UL << MPU_PROTENSET0_PROTREG2_Pos) /*!< Bit mask of PROTREG2 field. */ +#define MPU_PROTENSET0_PROTREG2_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG2_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG2_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 1 : Protection enable for region 1. */ +#define MPU_PROTENSET0_PROTREG1_Pos (1UL) /*!< Position of PROTREG1 field. */ +#define MPU_PROTENSET0_PROTREG1_Msk (0x1UL << MPU_PROTENSET0_PROTREG1_Pos) /*!< Bit mask of PROTREG1 field. */ +#define MPU_PROTENSET0_PROTREG1_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG1_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG1_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 0 : Protection enable for region 0. */ +#define MPU_PROTENSET0_PROTREG0_Pos (0UL) /*!< Position of PROTREG0 field. */ +#define MPU_PROTENSET0_PROTREG0_Msk (0x1UL << MPU_PROTENSET0_PROTREG0_Pos) /*!< Bit mask of PROTREG0 field. */ +#define MPU_PROTENSET0_PROTREG0_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET0_PROTREG0_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET0_PROTREG0_Set (1UL) /*!< Enable protection on write. */ + +/* Register: MPU_PROTENSET1 */ +/* Description: Protection bit enable set register for high addresses. */ + +/* Bit 31 : Protection enable for region 63. */ +#define MPU_PROTENSET1_PROTREG63_Pos (31UL) /*!< Position of PROTREG63 field. */ +#define MPU_PROTENSET1_PROTREG63_Msk (0x1UL << MPU_PROTENSET1_PROTREG63_Pos) /*!< Bit mask of PROTREG63 field. */ +#define MPU_PROTENSET1_PROTREG63_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG63_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG63_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 30 : Protection enable for region 62. */ +#define MPU_PROTENSET1_PROTREG62_Pos (30UL) /*!< Position of PROTREG62 field. */ +#define MPU_PROTENSET1_PROTREG62_Msk (0x1UL << MPU_PROTENSET1_PROTREG62_Pos) /*!< Bit mask of PROTREG62 field. */ +#define MPU_PROTENSET1_PROTREG62_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG62_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG62_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 29 : Protection enable for region 61. */ +#define MPU_PROTENSET1_PROTREG61_Pos (29UL) /*!< Position of PROTREG61 field. */ +#define MPU_PROTENSET1_PROTREG61_Msk (0x1UL << MPU_PROTENSET1_PROTREG61_Pos) /*!< Bit mask of PROTREG61 field. */ +#define MPU_PROTENSET1_PROTREG61_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG61_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG61_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 28 : Protection enable for region 60. */ +#define MPU_PROTENSET1_PROTREG60_Pos (28UL) /*!< Position of PROTREG60 field. */ +#define MPU_PROTENSET1_PROTREG60_Msk (0x1UL << MPU_PROTENSET1_PROTREG60_Pos) /*!< Bit mask of PROTREG60 field. */ +#define MPU_PROTENSET1_PROTREG60_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG60_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG60_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 27 : Protection enable for region 59. */ +#define MPU_PROTENSET1_PROTREG59_Pos (27UL) /*!< Position of PROTREG59 field. */ +#define MPU_PROTENSET1_PROTREG59_Msk (0x1UL << MPU_PROTENSET1_PROTREG59_Pos) /*!< Bit mask of PROTREG59 field. */ +#define MPU_PROTENSET1_PROTREG59_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG59_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG59_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 26 : Protection enable for region 58. */ +#define MPU_PROTENSET1_PROTREG58_Pos (26UL) /*!< Position of PROTREG58 field. */ +#define MPU_PROTENSET1_PROTREG58_Msk (0x1UL << MPU_PROTENSET1_PROTREG58_Pos) /*!< Bit mask of PROTREG58 field. */ +#define MPU_PROTENSET1_PROTREG58_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG58_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG58_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 25 : Protection enable for region 57. */ +#define MPU_PROTENSET1_PROTREG57_Pos (25UL) /*!< Position of PROTREG57 field. */ +#define MPU_PROTENSET1_PROTREG57_Msk (0x1UL << MPU_PROTENSET1_PROTREG57_Pos) /*!< Bit mask of PROTREG57 field. */ +#define MPU_PROTENSET1_PROTREG57_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG57_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG57_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 24 : Protection enable for region 56. */ +#define MPU_PROTENSET1_PROTREG56_Pos (24UL) /*!< Position of PROTREG56 field. */ +#define MPU_PROTENSET1_PROTREG56_Msk (0x1UL << MPU_PROTENSET1_PROTREG56_Pos) /*!< Bit mask of PROTREG56 field. */ +#define MPU_PROTENSET1_PROTREG56_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG56_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG56_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 23 : Protection enable for region 55. */ +#define MPU_PROTENSET1_PROTREG55_Pos (23UL) /*!< Position of PROTREG55 field. */ +#define MPU_PROTENSET1_PROTREG55_Msk (0x1UL << MPU_PROTENSET1_PROTREG55_Pos) /*!< Bit mask of PROTREG55 field. */ +#define MPU_PROTENSET1_PROTREG55_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG55_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG55_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 22 : Protection enable for region 54. */ +#define MPU_PROTENSET1_PROTREG54_Pos (22UL) /*!< Position of PROTREG54 field. */ +#define MPU_PROTENSET1_PROTREG54_Msk (0x1UL << MPU_PROTENSET1_PROTREG54_Pos) /*!< Bit mask of PROTREG54 field. */ +#define MPU_PROTENSET1_PROTREG54_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG54_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG54_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 21 : Protection enable for region 53. */ +#define MPU_PROTENSET1_PROTREG53_Pos (21UL) /*!< Position of PROTREG53 field. */ +#define MPU_PROTENSET1_PROTREG53_Msk (0x1UL << MPU_PROTENSET1_PROTREG53_Pos) /*!< Bit mask of PROTREG53 field. */ +#define MPU_PROTENSET1_PROTREG53_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG53_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG53_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 20 : Protection enable for region 52. */ +#define MPU_PROTENSET1_PROTREG52_Pos (20UL) /*!< Position of PROTREG52 field. */ +#define MPU_PROTENSET1_PROTREG52_Msk (0x1UL << MPU_PROTENSET1_PROTREG52_Pos) /*!< Bit mask of PROTREG52 field. */ +#define MPU_PROTENSET1_PROTREG52_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG52_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG52_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 19 : Protection enable for region 51. */ +#define MPU_PROTENSET1_PROTREG51_Pos (19UL) /*!< Position of PROTREG51 field. */ +#define MPU_PROTENSET1_PROTREG51_Msk (0x1UL << MPU_PROTENSET1_PROTREG51_Pos) /*!< Bit mask of PROTREG51 field. */ +#define MPU_PROTENSET1_PROTREG51_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG51_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG51_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 18 : Protection enable for region 50. */ +#define MPU_PROTENSET1_PROTREG50_Pos (18UL) /*!< Position of PROTREG50 field. */ +#define MPU_PROTENSET1_PROTREG50_Msk (0x1UL << MPU_PROTENSET1_PROTREG50_Pos) /*!< Bit mask of PROTREG50 field. */ +#define MPU_PROTENSET1_PROTREG50_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG50_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG50_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 17 : Protection enable for region 49. */ +#define MPU_PROTENSET1_PROTREG49_Pos (17UL) /*!< Position of PROTREG49 field. */ +#define MPU_PROTENSET1_PROTREG49_Msk (0x1UL << MPU_PROTENSET1_PROTREG49_Pos) /*!< Bit mask of PROTREG49 field. */ +#define MPU_PROTENSET1_PROTREG49_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG49_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG49_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 16 : Protection enable for region 48. */ +#define MPU_PROTENSET1_PROTREG48_Pos (16UL) /*!< Position of PROTREG48 field. */ +#define MPU_PROTENSET1_PROTREG48_Msk (0x1UL << MPU_PROTENSET1_PROTREG48_Pos) /*!< Bit mask of PROTREG48 field. */ +#define MPU_PROTENSET1_PROTREG48_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG48_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG48_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 15 : Protection enable for region 47. */ +#define MPU_PROTENSET1_PROTREG47_Pos (15UL) /*!< Position of PROTREG47 field. */ +#define MPU_PROTENSET1_PROTREG47_Msk (0x1UL << MPU_PROTENSET1_PROTREG47_Pos) /*!< Bit mask of PROTREG47 field. */ +#define MPU_PROTENSET1_PROTREG47_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG47_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG47_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 14 : Protection enable for region 46. */ +#define MPU_PROTENSET1_PROTREG46_Pos (14UL) /*!< Position of PROTREG46 field. */ +#define MPU_PROTENSET1_PROTREG46_Msk (0x1UL << MPU_PROTENSET1_PROTREG46_Pos) /*!< Bit mask of PROTREG46 field. */ +#define MPU_PROTENSET1_PROTREG46_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG46_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG46_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 13 : Protection enable for region 45. */ +#define MPU_PROTENSET1_PROTREG45_Pos (13UL) /*!< Position of PROTREG45 field. */ +#define MPU_PROTENSET1_PROTREG45_Msk (0x1UL << MPU_PROTENSET1_PROTREG45_Pos) /*!< Bit mask of PROTREG45 field. */ +#define MPU_PROTENSET1_PROTREG45_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG45_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG45_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 12 : Protection enable for region 44. */ +#define MPU_PROTENSET1_PROTREG44_Pos (12UL) /*!< Position of PROTREG44 field. */ +#define MPU_PROTENSET1_PROTREG44_Msk (0x1UL << MPU_PROTENSET1_PROTREG44_Pos) /*!< Bit mask of PROTREG44 field. */ +#define MPU_PROTENSET1_PROTREG44_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG44_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG44_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 11 : Protection enable for region 43. */ +#define MPU_PROTENSET1_PROTREG43_Pos (11UL) /*!< Position of PROTREG43 field. */ +#define MPU_PROTENSET1_PROTREG43_Msk (0x1UL << MPU_PROTENSET1_PROTREG43_Pos) /*!< Bit mask of PROTREG43 field. */ +#define MPU_PROTENSET1_PROTREG43_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG43_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG43_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 10 : Protection enable for region 42. */ +#define MPU_PROTENSET1_PROTREG42_Pos (10UL) /*!< Position of PROTREG42 field. */ +#define MPU_PROTENSET1_PROTREG42_Msk (0x1UL << MPU_PROTENSET1_PROTREG42_Pos) /*!< Bit mask of PROTREG42 field. */ +#define MPU_PROTENSET1_PROTREG42_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG42_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG42_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 9 : Protection enable for region 41. */ +#define MPU_PROTENSET1_PROTREG41_Pos (9UL) /*!< Position of PROTREG41 field. */ +#define MPU_PROTENSET1_PROTREG41_Msk (0x1UL << MPU_PROTENSET1_PROTREG41_Pos) /*!< Bit mask of PROTREG41 field. */ +#define MPU_PROTENSET1_PROTREG41_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG41_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG41_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 8 : Protection enable for region 40. */ +#define MPU_PROTENSET1_PROTREG40_Pos (8UL) /*!< Position of PROTREG40 field. */ +#define MPU_PROTENSET1_PROTREG40_Msk (0x1UL << MPU_PROTENSET1_PROTREG40_Pos) /*!< Bit mask of PROTREG40 field. */ +#define MPU_PROTENSET1_PROTREG40_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG40_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG40_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 7 : Protection enable for region 39. */ +#define MPU_PROTENSET1_PROTREG39_Pos (7UL) /*!< Position of PROTREG39 field. */ +#define MPU_PROTENSET1_PROTREG39_Msk (0x1UL << MPU_PROTENSET1_PROTREG39_Pos) /*!< Bit mask of PROTREG39 field. */ +#define MPU_PROTENSET1_PROTREG39_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG39_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG39_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 6 : Protection enable for region 38. */ +#define MPU_PROTENSET1_PROTREG38_Pos (6UL) /*!< Position of PROTREG38 field. */ +#define MPU_PROTENSET1_PROTREG38_Msk (0x1UL << MPU_PROTENSET1_PROTREG38_Pos) /*!< Bit mask of PROTREG38 field. */ +#define MPU_PROTENSET1_PROTREG38_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG38_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG38_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 5 : Protection enable for region 37. */ +#define MPU_PROTENSET1_PROTREG37_Pos (5UL) /*!< Position of PROTREG37 field. */ +#define MPU_PROTENSET1_PROTREG37_Msk (0x1UL << MPU_PROTENSET1_PROTREG37_Pos) /*!< Bit mask of PROTREG37 field. */ +#define MPU_PROTENSET1_PROTREG37_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG37_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG37_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 4 : Protection enable for region 36. */ +#define MPU_PROTENSET1_PROTREG36_Pos (4UL) /*!< Position of PROTREG36 field. */ +#define MPU_PROTENSET1_PROTREG36_Msk (0x1UL << MPU_PROTENSET1_PROTREG36_Pos) /*!< Bit mask of PROTREG36 field. */ +#define MPU_PROTENSET1_PROTREG36_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG36_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG36_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 3 : Protection enable for region 35. */ +#define MPU_PROTENSET1_PROTREG35_Pos (3UL) /*!< Position of PROTREG35 field. */ +#define MPU_PROTENSET1_PROTREG35_Msk (0x1UL << MPU_PROTENSET1_PROTREG35_Pos) /*!< Bit mask of PROTREG35 field. */ +#define MPU_PROTENSET1_PROTREG35_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG35_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG35_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 2 : Protection enable for region 34. */ +#define MPU_PROTENSET1_PROTREG34_Pos (2UL) /*!< Position of PROTREG34 field. */ +#define MPU_PROTENSET1_PROTREG34_Msk (0x1UL << MPU_PROTENSET1_PROTREG34_Pos) /*!< Bit mask of PROTREG34 field. */ +#define MPU_PROTENSET1_PROTREG34_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG34_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG34_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 1 : Protection enable for region 33. */ +#define MPU_PROTENSET1_PROTREG33_Pos (1UL) /*!< Position of PROTREG33 field. */ +#define MPU_PROTENSET1_PROTREG33_Msk (0x1UL << MPU_PROTENSET1_PROTREG33_Pos) /*!< Bit mask of PROTREG33 field. */ +#define MPU_PROTENSET1_PROTREG33_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG33_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG33_Set (1UL) /*!< Enable protection on write. */ + +/* Bit 0 : Protection enable for region 32. */ +#define MPU_PROTENSET1_PROTREG32_Pos (0UL) /*!< Position of PROTREG32 field. */ +#define MPU_PROTENSET1_PROTREG32_Msk (0x1UL << MPU_PROTENSET1_PROTREG32_Pos) /*!< Bit mask of PROTREG32 field. */ +#define MPU_PROTENSET1_PROTREG32_Disabled (0UL) /*!< Protection disabled. */ +#define MPU_PROTENSET1_PROTREG32_Enabled (1UL) /*!< Protection enabled. */ +#define MPU_PROTENSET1_PROTREG32_Set (1UL) /*!< Enable protection on write. */ + +/* Register: MPU_DISABLEINDEBUG */ +/* Description: Disable protection mechanism in debug mode. */ + +/* Bit 0 : Disable protection mechanism in debug mode. */ +#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Pos (0UL) /*!< Position of DISABLEINDEBUG field. */ +#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Msk (0x1UL << MPU_DISABLEINDEBUG_DISABLEINDEBUG_Pos) /*!< Bit mask of DISABLEINDEBUG field. */ +#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Enabled (0UL) /*!< Protection enabled. */ +#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Disabled (1UL) /*!< Protection disabled. */ + + +/* Peripheral: NVMC */ +/* Description: Non Volatile Memory Controller. */ + +/* Register: NVMC_READY */ +/* Description: Ready flag. */ + +/* Bit 0 : NVMC ready. */ +#define NVMC_READY_READY_Pos (0UL) /*!< Position of READY field. */ +#define NVMC_READY_READY_Msk (0x1UL << NVMC_READY_READY_Pos) /*!< Bit mask of READY field. */ +#define NVMC_READY_READY_Busy (0UL) /*!< NVMC is busy (on-going write or erase operation). */ +#define NVMC_READY_READY_Ready (1UL) /*!< NVMC is ready. */ + +/* Register: NVMC_CONFIG */ +/* Description: Configuration register. */ + +/* Bits 1..0 : Program write enable. */ +#define NVMC_CONFIG_WEN_Pos (0UL) /*!< Position of WEN field. */ +#define NVMC_CONFIG_WEN_Msk (0x3UL << NVMC_CONFIG_WEN_Pos) /*!< Bit mask of WEN field. */ +#define NVMC_CONFIG_WEN_Ren (0x00UL) /*!< Read only access. */ +#define NVMC_CONFIG_WEN_Wen (0x01UL) /*!< Write enabled. */ +#define NVMC_CONFIG_WEN_Een (0x02UL) /*!< Erase enabled. */ + +/* Register: NVMC_ERASEALL */ +/* Description: Register for erasing all non-volatile user memory. */ + +/* Bit 0 : Starts the erasing of all user NVM (code region 0/1 and UICR registers). */ +#define NVMC_ERASEALL_ERASEALL_Pos (0UL) /*!< Position of ERASEALL field. */ +#define NVMC_ERASEALL_ERASEALL_Msk (0x1UL << NVMC_ERASEALL_ERASEALL_Pos) /*!< Bit mask of ERASEALL field. */ +#define NVMC_ERASEALL_ERASEALL_NoOperation (0UL) /*!< No operation. */ +#define NVMC_ERASEALL_ERASEALL_Erase (1UL) /*!< Start chip erase. */ + +/* Register: NVMC_ERASEUICR */ +/* Description: Register for start erasing User Information Congfiguration Registers. */ + +/* Bit 0 : It can only be used when all contents of code region 1 are erased. */ +#define NVMC_ERASEUICR_ERASEUICR_Pos (0UL) /*!< Position of ERASEUICR field. */ +#define NVMC_ERASEUICR_ERASEUICR_Msk (0x1UL << NVMC_ERASEUICR_ERASEUICR_Pos) /*!< Bit mask of ERASEUICR field. */ +#define NVMC_ERASEUICR_ERASEUICR_NoOperation (0UL) /*!< No operation. */ +#define NVMC_ERASEUICR_ERASEUICR_Erase (1UL) /*!< Start UICR erase. */ + + +/* Peripheral: POWER */ +/* Description: Power Control. */ + +/* Register: POWER_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 2 : Enable interrupt on POFWARN event. */ +#define POWER_INTENSET_POFWARN_Pos (2UL) /*!< Position of POFWARN field. */ +#define POWER_INTENSET_POFWARN_Msk (0x1UL << POWER_INTENSET_POFWARN_Pos) /*!< Bit mask of POFWARN field. */ +#define POWER_INTENSET_POFWARN_Disabled (0UL) /*!< Interrupt disabled. */ +#define POWER_INTENSET_POFWARN_Enabled (1UL) /*!< Interrupt enabled. */ +#define POWER_INTENSET_POFWARN_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: POWER_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 2 : Disable interrupt on POFWARN event. */ +#define POWER_INTENCLR_POFWARN_Pos (2UL) /*!< Position of POFWARN field. */ +#define POWER_INTENCLR_POFWARN_Msk (0x1UL << POWER_INTENCLR_POFWARN_Pos) /*!< Bit mask of POFWARN field. */ +#define POWER_INTENCLR_POFWARN_Disabled (0UL) /*!< Interrupt disabled. */ +#define POWER_INTENCLR_POFWARN_Enabled (1UL) /*!< Interrupt enabled. */ +#define POWER_INTENCLR_POFWARN_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: POWER_RESETREAS */ +/* Description: Reset reason. */ + +/* Bit 18 : Reset from wake-up from OFF mode detected by entering into debug interface mode. */ +#define POWER_RESETREAS_DIF_Pos (18UL) /*!< Position of DIF field. */ +#define POWER_RESETREAS_DIF_Msk (0x1UL << POWER_RESETREAS_DIF_Pos) /*!< Bit mask of DIF field. */ + +/* Bit 17 : Reset from wake-up from OFF mode detected by the use of ANADETECT signal from LPCOMP. */ +#define POWER_RESETREAS_LPCOMP_Pos (17UL) /*!< Position of LPCOMP field. */ +#define POWER_RESETREAS_LPCOMP_Msk (0x1UL << POWER_RESETREAS_LPCOMP_Pos) /*!< Bit mask of LPCOMP field. */ + +/* Bit 16 : Reset from wake-up from OFF mode detected by the use of DETECT signal from GPIO. */ +#define POWER_RESETREAS_OFF_Pos (16UL) /*!< Position of OFF field. */ +#define POWER_RESETREAS_OFF_Msk (0x1UL << POWER_RESETREAS_OFF_Pos) /*!< Bit mask of OFF field. */ + +/* Bit 3 : Reset from CPU lock-up detected. */ +#define POWER_RESETREAS_LOCKUP_Pos (3UL) /*!< Position of LOCKUP field. */ +#define POWER_RESETREAS_LOCKUP_Msk (0x1UL << POWER_RESETREAS_LOCKUP_Pos) /*!< Bit mask of LOCKUP field. */ + +/* Bit 2 : Reset from AIRCR.SYSRESETREQ detected. */ +#define POWER_RESETREAS_SREQ_Pos (2UL) /*!< Position of SREQ field. */ +#define POWER_RESETREAS_SREQ_Msk (0x1UL << POWER_RESETREAS_SREQ_Pos) /*!< Bit mask of SREQ field. */ + +/* Bit 1 : Reset from watchdog detected. */ +#define POWER_RESETREAS_DOG_Pos (1UL) /*!< Position of DOG field. */ +#define POWER_RESETREAS_DOG_Msk (0x1UL << POWER_RESETREAS_DOG_Pos) /*!< Bit mask of DOG field. */ + +/* Bit 0 : Reset from pin-reset detected. */ +#define POWER_RESETREAS_RESETPIN_Pos (0UL) /*!< Position of RESETPIN field. */ +#define POWER_RESETREAS_RESETPIN_Msk (0x1UL << POWER_RESETREAS_RESETPIN_Pos) /*!< Bit mask of RESETPIN field. */ + +/* Register: POWER_SYSTEMOFF */ +/* Description: System off register. */ + +/* Bit 0 : Enter system off mode. */ +#define POWER_SYSTEMOFF_SYSTEMOFF_Pos (0UL) /*!< Position of SYSTEMOFF field. */ +#define POWER_SYSTEMOFF_SYSTEMOFF_Msk (0x1UL << POWER_SYSTEMOFF_SYSTEMOFF_Pos) /*!< Bit mask of SYSTEMOFF field. */ +#define POWER_SYSTEMOFF_SYSTEMOFF_Enter (1UL) /*!< Enter system off mode. */ + +/* Register: POWER_POFCON */ +/* Description: Power failure configuration. */ + +/* Bits 2..1 : Set threshold level. */ +#define POWER_POFCON_THRESHOLD_Pos (1UL) /*!< Position of THRESHOLD field. */ +#define POWER_POFCON_THRESHOLD_Msk (0x3UL << POWER_POFCON_THRESHOLD_Pos) /*!< Bit mask of THRESHOLD field. */ +#define POWER_POFCON_THRESHOLD_V21 (0x00UL) /*!< Set threshold to 2.1Volts. */ +#define POWER_POFCON_THRESHOLD_V23 (0x01UL) /*!< Set threshold to 2.3Volts. */ +#define POWER_POFCON_THRESHOLD_V25 (0x02UL) /*!< Set threshold to 2.5Volts. */ +#define POWER_POFCON_THRESHOLD_V27 (0x03UL) /*!< Set threshold to 2.7Volts. */ + +/* Bit 0 : Power failure comparator enable. */ +#define POWER_POFCON_POF_Pos (0UL) /*!< Position of POF field. */ +#define POWER_POFCON_POF_Msk (0x1UL << POWER_POFCON_POF_Pos) /*!< Bit mask of POF field. */ +#define POWER_POFCON_POF_Disabled (0UL) /*!< Disabled. */ +#define POWER_POFCON_POF_Enabled (1UL) /*!< Enabled. */ + +/* Register: POWER_GPREGRET */ +/* Description: General purpose retention register. This register is a retained register. */ + +/* Bits 7..0 : General purpose retention register. */ +#define POWER_GPREGRET_GPREGRET_Pos (0UL) /*!< Position of GPREGRET field. */ +#define POWER_GPREGRET_GPREGRET_Msk (0xFFUL << POWER_GPREGRET_GPREGRET_Pos) /*!< Bit mask of GPREGRET field. */ + +/* Register: POWER_RAMON */ +/* Description: Ram on/off. */ + +/* Bit 19 : RAM block 3 behaviour in OFF mode. */ +#define POWER_RAMON_OFFRAM3_Pos (19UL) /*!< Position of OFFRAM3 field. */ +#define POWER_RAMON_OFFRAM3_Msk (0x1UL << POWER_RAMON_OFFRAM3_Pos) /*!< Bit mask of OFFRAM3 field. */ +#define POWER_RAMON_OFFRAM3_RAM3Off (0UL) /*!< RAM block 3 OFF in OFF mode. */ +#define POWER_RAMON_OFFRAM3_RAM3On (1UL) /*!< RAM block 3 ON in OFF mode. */ + +/* Bit 18 : RAM block 2 behaviour in OFF mode. */ +#define POWER_RAMON_OFFRAM2_Pos (18UL) /*!< Position of OFFRAM2 field. */ +#define POWER_RAMON_OFFRAM2_Msk (0x1UL << POWER_RAMON_OFFRAM2_Pos) /*!< Bit mask of OFFRAM2 field. */ +#define POWER_RAMON_OFFRAM2_RAM2Off (0UL) /*!< RAM block 2 OFF in OFF mode. */ +#define POWER_RAMON_OFFRAM2_RAM2On (1UL) /*!< RAM block 2 ON in OFF mode. */ + +/* Bit 17 : RAM block 1 behaviour in OFF mode. */ +#define POWER_RAMON_OFFRAM1_Pos (17UL) /*!< Position of OFFRAM1 field. */ +#define POWER_RAMON_OFFRAM1_Msk (0x1UL << POWER_RAMON_OFFRAM1_Pos) /*!< Bit mask of OFFRAM1 field. */ +#define POWER_RAMON_OFFRAM1_RAM1Off (0UL) /*!< RAM block 1 OFF in OFF mode. */ +#define POWER_RAMON_OFFRAM1_RAM1On (1UL) /*!< RAM block 1 ON in OFF mode. */ + +/* Bit 16 : RAM block 0 behaviour in OFF mode. */ +#define POWER_RAMON_OFFRAM0_Pos (16UL) /*!< Position of OFFRAM0 field. */ +#define POWER_RAMON_OFFRAM0_Msk (0x1UL << POWER_RAMON_OFFRAM0_Pos) /*!< Bit mask of OFFRAM0 field. */ +#define POWER_RAMON_OFFRAM0_RAM0Off (0UL) /*!< RAM block 0 OFF in OFF mode. */ +#define POWER_RAMON_OFFRAM0_RAM0On (1UL) /*!< RAM block 0 ON in OFF mode. */ + +/* Bit 3 : RAM block 3 behaviour in ON mode. */ +#define POWER_RAMON_ONRAM3_Pos (3UL) /*!< Position of ONRAM3 field. */ +#define POWER_RAMON_ONRAM3_Msk (0x1UL << POWER_RAMON_ONRAM3_Pos) /*!< Bit mask of ONRAM3 field. */ +#define POWER_RAMON_ONRAM3_RAM3Off (0UL) /*!< RAM block 3 OFF in ON mode. */ +#define POWER_RAMON_ONRAM3_RAM3On (1UL) /*!< RAM block 3 ON in ON mode. */ + +/* Bit 2 : RAM block 2 behaviour in ON mode. */ +#define POWER_RAMON_ONRAM2_Pos (2UL) /*!< Position of ONRAM2 field. */ +#define POWER_RAMON_ONRAM2_Msk (0x1UL << POWER_RAMON_ONRAM2_Pos) /*!< Bit mask of ONRAM2 field. */ +#define POWER_RAMON_ONRAM2_RAM2Off (0UL) /*!< RAM block 2 OFF in ON mode. */ +#define POWER_RAMON_ONRAM2_RAM2On (1UL) /*!< RAM block 2 ON in ON mode. */ + +/* Bit 1 : RAM block 1 behaviour in ON mode. */ +#define POWER_RAMON_ONRAM1_Pos (1UL) /*!< Position of ONRAM1 field. */ +#define POWER_RAMON_ONRAM1_Msk (0x1UL << POWER_RAMON_ONRAM1_Pos) /*!< Bit mask of ONRAM1 field. */ +#define POWER_RAMON_ONRAM1_RAM1Off (0UL) /*!< RAM block 1 OFF in ON mode. */ +#define POWER_RAMON_ONRAM1_RAM1On (1UL) /*!< RAM block 1 ON in ON mode. */ + +/* Bit 0 : RAM block 0 behaviour in ON mode. */ +#define POWER_RAMON_ONRAM0_Pos (0UL) /*!< Position of ONRAM0 field. */ +#define POWER_RAMON_ONRAM0_Msk (0x1UL << POWER_RAMON_ONRAM0_Pos) /*!< Bit mask of ONRAM0 field. */ +#define POWER_RAMON_ONRAM0_RAM0Off (0UL) /*!< RAM block 0 OFF in ON mode. */ +#define POWER_RAMON_ONRAM0_RAM0On (1UL) /*!< RAM block 0 ON in ON mode. */ + +/* Register: POWER_RESET */ +/* Description: Pin reset functionality configuration register. This register is a retained register. */ + +/* Bit 0 : Enable pin reset in debug interface mode. */ +#define POWER_RESET_RESET_Pos (0UL) /*!< Position of RESET field. */ +#define POWER_RESET_RESET_Msk (0x1UL << POWER_RESET_RESET_Pos) /*!< Bit mask of RESET field. */ +#define POWER_RESET_RESET_Disabled (0UL) /*!< Pin reset in debug interface mode disabled. */ +#define POWER_RESET_RESET_Enabled (1UL) /*!< Pin reset in debug interface mode enabled. */ + +/* Register: POWER_DCDCEN */ +/* Description: DCDC converter enable configuration register. */ + +/* Bit 0 : Enable DCDC converter. */ +#define POWER_DCDCEN_DCDCEN_Pos (0UL) /*!< Position of DCDCEN field. */ +#define POWER_DCDCEN_DCDCEN_Msk (0x1UL << POWER_DCDCEN_DCDCEN_Pos) /*!< Bit mask of DCDCEN field. */ +#define POWER_DCDCEN_DCDCEN_Disabled (0UL) /*!< DCDC converter disabled. */ +#define POWER_DCDCEN_DCDCEN_Enabled (1UL) /*!< DCDC converter enabled. */ + + +/* Peripheral: PPI */ +/* Description: PPI controller. */ + +/* Register: PPI_CHEN */ +/* Description: Channel enable. */ + +/* Bit 31 : Enable PPI channel 31. */ +#define PPI_CHEN_CH31_Pos (31UL) /*!< Position of CH31 field. */ +#define PPI_CHEN_CH31_Msk (0x1UL << PPI_CHEN_CH31_Pos) /*!< Bit mask of CH31 field. */ +#define PPI_CHEN_CH31_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH31_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 30 : Enable PPI channel 30. */ +#define PPI_CHEN_CH30_Pos (30UL) /*!< Position of CH30 field. */ +#define PPI_CHEN_CH30_Msk (0x1UL << PPI_CHEN_CH30_Pos) /*!< Bit mask of CH30 field. */ +#define PPI_CHEN_CH30_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH30_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 29 : Enable PPI channel 29. */ +#define PPI_CHEN_CH29_Pos (29UL) /*!< Position of CH29 field. */ +#define PPI_CHEN_CH29_Msk (0x1UL << PPI_CHEN_CH29_Pos) /*!< Bit mask of CH29 field. */ +#define PPI_CHEN_CH29_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH29_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 28 : Enable PPI channel 28. */ +#define PPI_CHEN_CH28_Pos (28UL) /*!< Position of CH28 field. */ +#define PPI_CHEN_CH28_Msk (0x1UL << PPI_CHEN_CH28_Pos) /*!< Bit mask of CH28 field. */ +#define PPI_CHEN_CH28_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH28_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 27 : Enable PPI channel 27. */ +#define PPI_CHEN_CH27_Pos (27UL) /*!< Position of CH27 field. */ +#define PPI_CHEN_CH27_Msk (0x1UL << PPI_CHEN_CH27_Pos) /*!< Bit mask of CH27 field. */ +#define PPI_CHEN_CH27_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH27_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 26 : Enable PPI channel 26. */ +#define PPI_CHEN_CH26_Pos (26UL) /*!< Position of CH26 field. */ +#define PPI_CHEN_CH26_Msk (0x1UL << PPI_CHEN_CH26_Pos) /*!< Bit mask of CH26 field. */ +#define PPI_CHEN_CH26_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH26_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 25 : Enable PPI channel 25. */ +#define PPI_CHEN_CH25_Pos (25UL) /*!< Position of CH25 field. */ +#define PPI_CHEN_CH25_Msk (0x1UL << PPI_CHEN_CH25_Pos) /*!< Bit mask of CH25 field. */ +#define PPI_CHEN_CH25_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH25_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 24 : Enable PPI channel 24. */ +#define PPI_CHEN_CH24_Pos (24UL) /*!< Position of CH24 field. */ +#define PPI_CHEN_CH24_Msk (0x1UL << PPI_CHEN_CH24_Pos) /*!< Bit mask of CH24 field. */ +#define PPI_CHEN_CH24_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH24_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 23 : Enable PPI channel 23. */ +#define PPI_CHEN_CH23_Pos (23UL) /*!< Position of CH23 field. */ +#define PPI_CHEN_CH23_Msk (0x1UL << PPI_CHEN_CH23_Pos) /*!< Bit mask of CH23 field. */ +#define PPI_CHEN_CH23_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH23_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 22 : Enable PPI channel 22. */ +#define PPI_CHEN_CH22_Pos (22UL) /*!< Position of CH22 field. */ +#define PPI_CHEN_CH22_Msk (0x1UL << PPI_CHEN_CH22_Pos) /*!< Bit mask of CH22 field. */ +#define PPI_CHEN_CH22_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH22_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 21 : Enable PPI channel 21. */ +#define PPI_CHEN_CH21_Pos (21UL) /*!< Position of CH21 field. */ +#define PPI_CHEN_CH21_Msk (0x1UL << PPI_CHEN_CH21_Pos) /*!< Bit mask of CH21 field. */ +#define PPI_CHEN_CH21_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH21_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 20 : Enable PPI channel 20. */ +#define PPI_CHEN_CH20_Pos (20UL) /*!< Position of CH20 field. */ +#define PPI_CHEN_CH20_Msk (0x1UL << PPI_CHEN_CH20_Pos) /*!< Bit mask of CH20 field. */ +#define PPI_CHEN_CH20_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH20_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 15 : Enable PPI channel 15. */ +#define PPI_CHEN_CH15_Pos (15UL) /*!< Position of CH15 field. */ +#define PPI_CHEN_CH15_Msk (0x1UL << PPI_CHEN_CH15_Pos) /*!< Bit mask of CH15 field. */ +#define PPI_CHEN_CH15_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH15_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 14 : Enable PPI channel 14. */ +#define PPI_CHEN_CH14_Pos (14UL) /*!< Position of CH14 field. */ +#define PPI_CHEN_CH14_Msk (0x1UL << PPI_CHEN_CH14_Pos) /*!< Bit mask of CH14 field. */ +#define PPI_CHEN_CH14_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH14_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 13 : Enable PPI channel 13. */ +#define PPI_CHEN_CH13_Pos (13UL) /*!< Position of CH13 field. */ +#define PPI_CHEN_CH13_Msk (0x1UL << PPI_CHEN_CH13_Pos) /*!< Bit mask of CH13 field. */ +#define PPI_CHEN_CH13_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH13_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 12 : Enable PPI channel 12. */ +#define PPI_CHEN_CH12_Pos (12UL) /*!< Position of CH12 field. */ +#define PPI_CHEN_CH12_Msk (0x1UL << PPI_CHEN_CH12_Pos) /*!< Bit mask of CH12 field. */ +#define PPI_CHEN_CH12_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH12_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 11 : Enable PPI channel 11. */ +#define PPI_CHEN_CH11_Pos (11UL) /*!< Position of CH11 field. */ +#define PPI_CHEN_CH11_Msk (0x1UL << PPI_CHEN_CH11_Pos) /*!< Bit mask of CH11 field. */ +#define PPI_CHEN_CH11_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH11_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 10 : Enable PPI channel 10. */ +#define PPI_CHEN_CH10_Pos (10UL) /*!< Position of CH10 field. */ +#define PPI_CHEN_CH10_Msk (0x1UL << PPI_CHEN_CH10_Pos) /*!< Bit mask of CH10 field. */ +#define PPI_CHEN_CH10_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH10_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 9 : Enable PPI channel 9. */ +#define PPI_CHEN_CH9_Pos (9UL) /*!< Position of CH9 field. */ +#define PPI_CHEN_CH9_Msk (0x1UL << PPI_CHEN_CH9_Pos) /*!< Bit mask of CH9 field. */ +#define PPI_CHEN_CH9_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH9_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 8 : Enable PPI channel 8. */ +#define PPI_CHEN_CH8_Pos (8UL) /*!< Position of CH8 field. */ +#define PPI_CHEN_CH8_Msk (0x1UL << PPI_CHEN_CH8_Pos) /*!< Bit mask of CH8 field. */ +#define PPI_CHEN_CH8_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH8_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 7 : Enable PPI channel 7. */ +#define PPI_CHEN_CH7_Pos (7UL) /*!< Position of CH7 field. */ +#define PPI_CHEN_CH7_Msk (0x1UL << PPI_CHEN_CH7_Pos) /*!< Bit mask of CH7 field. */ +#define PPI_CHEN_CH7_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH7_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 6 : Enable PPI channel 6. */ +#define PPI_CHEN_CH6_Pos (6UL) /*!< Position of CH6 field. */ +#define PPI_CHEN_CH6_Msk (0x1UL << PPI_CHEN_CH6_Pos) /*!< Bit mask of CH6 field. */ +#define PPI_CHEN_CH6_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH6_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 5 : Enable PPI channel 5. */ +#define PPI_CHEN_CH5_Pos (5UL) /*!< Position of CH5 field. */ +#define PPI_CHEN_CH5_Msk (0x1UL << PPI_CHEN_CH5_Pos) /*!< Bit mask of CH5 field. */ +#define PPI_CHEN_CH5_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH5_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 4 : Enable PPI channel 4. */ +#define PPI_CHEN_CH4_Pos (4UL) /*!< Position of CH4 field. */ +#define PPI_CHEN_CH4_Msk (0x1UL << PPI_CHEN_CH4_Pos) /*!< Bit mask of CH4 field. */ +#define PPI_CHEN_CH4_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH4_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 3 : Enable PPI channel 3. */ +#define PPI_CHEN_CH3_Pos (3UL) /*!< Position of CH3 field. */ +#define PPI_CHEN_CH3_Msk (0x1UL << PPI_CHEN_CH3_Pos) /*!< Bit mask of CH3 field. */ +#define PPI_CHEN_CH3_Disabled (0UL) /*!< Channel disabled */ +#define PPI_CHEN_CH3_Enabled (1UL) /*!< Channel enabled */ + +/* Bit 2 : Enable PPI channel 2. */ +#define PPI_CHEN_CH2_Pos (2UL) /*!< Position of CH2 field. */ +#define PPI_CHEN_CH2_Msk (0x1UL << PPI_CHEN_CH2_Pos) /*!< Bit mask of CH2 field. */ +#define PPI_CHEN_CH2_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH2_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 1 : Enable PPI channel 1. */ +#define PPI_CHEN_CH1_Pos (1UL) /*!< Position of CH1 field. */ +#define PPI_CHEN_CH1_Msk (0x1UL << PPI_CHEN_CH1_Pos) /*!< Bit mask of CH1 field. */ +#define PPI_CHEN_CH1_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH1_Enabled (1UL) /*!< Channel enabled. */ + +/* Bit 0 : Enable PPI channel 0. */ +#define PPI_CHEN_CH0_Pos (0UL) /*!< Position of CH0 field. */ +#define PPI_CHEN_CH0_Msk (0x1UL << PPI_CHEN_CH0_Pos) /*!< Bit mask of CH0 field. */ +#define PPI_CHEN_CH0_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHEN_CH0_Enabled (1UL) /*!< Channel enabled. */ + +/* Register: PPI_CHENSET */ +/* Description: Channel enable set. */ + +/* Bit 31 : Enable PPI channel 31. */ +#define PPI_CHENSET_CH31_Pos (31UL) /*!< Position of CH31 field. */ +#define PPI_CHENSET_CH31_Msk (0x1UL << PPI_CHENSET_CH31_Pos) /*!< Bit mask of CH31 field. */ +#define PPI_CHENSET_CH31_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH31_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH31_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 30 : Enable PPI channel 30. */ +#define PPI_CHENSET_CH30_Pos (30UL) /*!< Position of CH30 field. */ +#define PPI_CHENSET_CH30_Msk (0x1UL << PPI_CHENSET_CH30_Pos) /*!< Bit mask of CH30 field. */ +#define PPI_CHENSET_CH30_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH30_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH30_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 29 : Enable PPI channel 29. */ +#define PPI_CHENSET_CH29_Pos (29UL) /*!< Position of CH29 field. */ +#define PPI_CHENSET_CH29_Msk (0x1UL << PPI_CHENSET_CH29_Pos) /*!< Bit mask of CH29 field. */ +#define PPI_CHENSET_CH29_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH29_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH29_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 28 : Enable PPI channel 28. */ +#define PPI_CHENSET_CH28_Pos (28UL) /*!< Position of CH28 field. */ +#define PPI_CHENSET_CH28_Msk (0x1UL << PPI_CHENSET_CH28_Pos) /*!< Bit mask of CH28 field. */ +#define PPI_CHENSET_CH28_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH28_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH28_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 27 : Enable PPI channel 27. */ +#define PPI_CHENSET_CH27_Pos (27UL) /*!< Position of CH27 field. */ +#define PPI_CHENSET_CH27_Msk (0x1UL << PPI_CHENSET_CH27_Pos) /*!< Bit mask of CH27 field. */ +#define PPI_CHENSET_CH27_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH27_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH27_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 26 : Enable PPI channel 26. */ +#define PPI_CHENSET_CH26_Pos (26UL) /*!< Position of CH26 field. */ +#define PPI_CHENSET_CH26_Msk (0x1UL << PPI_CHENSET_CH26_Pos) /*!< Bit mask of CH26 field. */ +#define PPI_CHENSET_CH26_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH26_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH26_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 25 : Enable PPI channel 25. */ +#define PPI_CHENSET_CH25_Pos (25UL) /*!< Position of CH25 field. */ +#define PPI_CHENSET_CH25_Msk (0x1UL << PPI_CHENSET_CH25_Pos) /*!< Bit mask of CH25 field. */ +#define PPI_CHENSET_CH25_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH25_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH25_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 24 : Enable PPI channel 24. */ +#define PPI_CHENSET_CH24_Pos (24UL) /*!< Position of CH24 field. */ +#define PPI_CHENSET_CH24_Msk (0x1UL << PPI_CHENSET_CH24_Pos) /*!< Bit mask of CH24 field. */ +#define PPI_CHENSET_CH24_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH24_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH24_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 23 : Enable PPI channel 23. */ +#define PPI_CHENSET_CH23_Pos (23UL) /*!< Position of CH23 field. */ +#define PPI_CHENSET_CH23_Msk (0x1UL << PPI_CHENSET_CH23_Pos) /*!< Bit mask of CH23 field. */ +#define PPI_CHENSET_CH23_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH23_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH23_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 22 : Enable PPI channel 22. */ +#define PPI_CHENSET_CH22_Pos (22UL) /*!< Position of CH22 field. */ +#define PPI_CHENSET_CH22_Msk (0x1UL << PPI_CHENSET_CH22_Pos) /*!< Bit mask of CH22 field. */ +#define PPI_CHENSET_CH22_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH22_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH22_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 21 : Enable PPI channel 21. */ +#define PPI_CHENSET_CH21_Pos (21UL) /*!< Position of CH21 field. */ +#define PPI_CHENSET_CH21_Msk (0x1UL << PPI_CHENSET_CH21_Pos) /*!< Bit mask of CH21 field. */ +#define PPI_CHENSET_CH21_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH21_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH21_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 20 : Enable PPI channel 20. */ +#define PPI_CHENSET_CH20_Pos (20UL) /*!< Position of CH20 field. */ +#define PPI_CHENSET_CH20_Msk (0x1UL << PPI_CHENSET_CH20_Pos) /*!< Bit mask of CH20 field. */ +#define PPI_CHENSET_CH20_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH20_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH20_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 15 : Enable PPI channel 15. */ +#define PPI_CHENSET_CH15_Pos (15UL) /*!< Position of CH15 field. */ +#define PPI_CHENSET_CH15_Msk (0x1UL << PPI_CHENSET_CH15_Pos) /*!< Bit mask of CH15 field. */ +#define PPI_CHENSET_CH15_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH15_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH15_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 14 : Enable PPI channel 14. */ +#define PPI_CHENSET_CH14_Pos (14UL) /*!< Position of CH14 field. */ +#define PPI_CHENSET_CH14_Msk (0x1UL << PPI_CHENSET_CH14_Pos) /*!< Bit mask of CH14 field. */ +#define PPI_CHENSET_CH14_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH14_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH14_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 13 : Enable PPI channel 13. */ +#define PPI_CHENSET_CH13_Pos (13UL) /*!< Position of CH13 field. */ +#define PPI_CHENSET_CH13_Msk (0x1UL << PPI_CHENSET_CH13_Pos) /*!< Bit mask of CH13 field. */ +#define PPI_CHENSET_CH13_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH13_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH13_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 12 : Enable PPI channel 12. */ +#define PPI_CHENSET_CH12_Pos (12UL) /*!< Position of CH12 field. */ +#define PPI_CHENSET_CH12_Msk (0x1UL << PPI_CHENSET_CH12_Pos) /*!< Bit mask of CH12 field. */ +#define PPI_CHENSET_CH12_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH12_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH12_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 11 : Enable PPI channel 11. */ +#define PPI_CHENSET_CH11_Pos (11UL) /*!< Position of CH11 field. */ +#define PPI_CHENSET_CH11_Msk (0x1UL << PPI_CHENSET_CH11_Pos) /*!< Bit mask of CH11 field. */ +#define PPI_CHENSET_CH11_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH11_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH11_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 10 : Enable PPI channel 10. */ +#define PPI_CHENSET_CH10_Pos (10UL) /*!< Position of CH10 field. */ +#define PPI_CHENSET_CH10_Msk (0x1UL << PPI_CHENSET_CH10_Pos) /*!< Bit mask of CH10 field. */ +#define PPI_CHENSET_CH10_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH10_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH10_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 9 : Enable PPI channel 9. */ +#define PPI_CHENSET_CH9_Pos (9UL) /*!< Position of CH9 field. */ +#define PPI_CHENSET_CH9_Msk (0x1UL << PPI_CHENSET_CH9_Pos) /*!< Bit mask of CH9 field. */ +#define PPI_CHENSET_CH9_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH9_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH9_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 8 : Enable PPI channel 8. */ +#define PPI_CHENSET_CH8_Pos (8UL) /*!< Position of CH8 field. */ +#define PPI_CHENSET_CH8_Msk (0x1UL << PPI_CHENSET_CH8_Pos) /*!< Bit mask of CH8 field. */ +#define PPI_CHENSET_CH8_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH8_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH8_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 7 : Enable PPI channel 7. */ +#define PPI_CHENSET_CH7_Pos (7UL) /*!< Position of CH7 field. */ +#define PPI_CHENSET_CH7_Msk (0x1UL << PPI_CHENSET_CH7_Pos) /*!< Bit mask of CH7 field. */ +#define PPI_CHENSET_CH7_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH7_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH7_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 6 : Enable PPI channel 6. */ +#define PPI_CHENSET_CH6_Pos (6UL) /*!< Position of CH6 field. */ +#define PPI_CHENSET_CH6_Msk (0x1UL << PPI_CHENSET_CH6_Pos) /*!< Bit mask of CH6 field. */ +#define PPI_CHENSET_CH6_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH6_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH6_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 5 : Enable PPI channel 5. */ +#define PPI_CHENSET_CH5_Pos (5UL) /*!< Position of CH5 field. */ +#define PPI_CHENSET_CH5_Msk (0x1UL << PPI_CHENSET_CH5_Pos) /*!< Bit mask of CH5 field. */ +#define PPI_CHENSET_CH5_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH5_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH5_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 4 : Enable PPI channel 4. */ +#define PPI_CHENSET_CH4_Pos (4UL) /*!< Position of CH4 field. */ +#define PPI_CHENSET_CH4_Msk (0x1UL << PPI_CHENSET_CH4_Pos) /*!< Bit mask of CH4 field. */ +#define PPI_CHENSET_CH4_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH4_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH4_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 3 : Enable PPI channel 3. */ +#define PPI_CHENSET_CH3_Pos (3UL) /*!< Position of CH3 field. */ +#define PPI_CHENSET_CH3_Msk (0x1UL << PPI_CHENSET_CH3_Pos) /*!< Bit mask of CH3 field. */ +#define PPI_CHENSET_CH3_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH3_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH3_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 2 : Enable PPI channel 2. */ +#define PPI_CHENSET_CH2_Pos (2UL) /*!< Position of CH2 field. */ +#define PPI_CHENSET_CH2_Msk (0x1UL << PPI_CHENSET_CH2_Pos) /*!< Bit mask of CH2 field. */ +#define PPI_CHENSET_CH2_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH2_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH2_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 1 : Enable PPI channel 1. */ +#define PPI_CHENSET_CH1_Pos (1UL) /*!< Position of CH1 field. */ +#define PPI_CHENSET_CH1_Msk (0x1UL << PPI_CHENSET_CH1_Pos) /*!< Bit mask of CH1 field. */ +#define PPI_CHENSET_CH1_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH1_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH1_Set (1UL) /*!< Enable channel on write. */ + +/* Bit 0 : Enable PPI channel 0. */ +#define PPI_CHENSET_CH0_Pos (0UL) /*!< Position of CH0 field. */ +#define PPI_CHENSET_CH0_Msk (0x1UL << PPI_CHENSET_CH0_Pos) /*!< Bit mask of CH0 field. */ +#define PPI_CHENSET_CH0_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENSET_CH0_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENSET_CH0_Set (1UL) /*!< Enable channel on write. */ + +/* Register: PPI_CHENCLR */ +/* Description: Channel enable clear. */ + +/* Bit 31 : Disable PPI channel 31. */ +#define PPI_CHENCLR_CH31_Pos (31UL) /*!< Position of CH31 field. */ +#define PPI_CHENCLR_CH31_Msk (0x1UL << PPI_CHENCLR_CH31_Pos) /*!< Bit mask of CH31 field. */ +#define PPI_CHENCLR_CH31_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH31_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH31_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 30 : Disable PPI channel 30. */ +#define PPI_CHENCLR_CH30_Pos (30UL) /*!< Position of CH30 field. */ +#define PPI_CHENCLR_CH30_Msk (0x1UL << PPI_CHENCLR_CH30_Pos) /*!< Bit mask of CH30 field. */ +#define PPI_CHENCLR_CH30_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH30_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH30_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 29 : Disable PPI channel 29. */ +#define PPI_CHENCLR_CH29_Pos (29UL) /*!< Position of CH29 field. */ +#define PPI_CHENCLR_CH29_Msk (0x1UL << PPI_CHENCLR_CH29_Pos) /*!< Bit mask of CH29 field. */ +#define PPI_CHENCLR_CH29_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH29_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH29_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 28 : Disable PPI channel 28. */ +#define PPI_CHENCLR_CH28_Pos (28UL) /*!< Position of CH28 field. */ +#define PPI_CHENCLR_CH28_Msk (0x1UL << PPI_CHENCLR_CH28_Pos) /*!< Bit mask of CH28 field. */ +#define PPI_CHENCLR_CH28_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH28_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH28_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 27 : Disable PPI channel 27. */ +#define PPI_CHENCLR_CH27_Pos (27UL) /*!< Position of CH27 field. */ +#define PPI_CHENCLR_CH27_Msk (0x1UL << PPI_CHENCLR_CH27_Pos) /*!< Bit mask of CH27 field. */ +#define PPI_CHENCLR_CH27_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH27_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH27_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 26 : Disable PPI channel 26. */ +#define PPI_CHENCLR_CH26_Pos (26UL) /*!< Position of CH26 field. */ +#define PPI_CHENCLR_CH26_Msk (0x1UL << PPI_CHENCLR_CH26_Pos) /*!< Bit mask of CH26 field. */ +#define PPI_CHENCLR_CH26_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH26_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH26_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 25 : Disable PPI channel 25. */ +#define PPI_CHENCLR_CH25_Pos (25UL) /*!< Position of CH25 field. */ +#define PPI_CHENCLR_CH25_Msk (0x1UL << PPI_CHENCLR_CH25_Pos) /*!< Bit mask of CH25 field. */ +#define PPI_CHENCLR_CH25_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH25_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH25_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 24 : Disable PPI channel 24. */ +#define PPI_CHENCLR_CH24_Pos (24UL) /*!< Position of CH24 field. */ +#define PPI_CHENCLR_CH24_Msk (0x1UL << PPI_CHENCLR_CH24_Pos) /*!< Bit mask of CH24 field. */ +#define PPI_CHENCLR_CH24_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH24_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH24_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 23 : Disable PPI channel 23. */ +#define PPI_CHENCLR_CH23_Pos (23UL) /*!< Position of CH23 field. */ +#define PPI_CHENCLR_CH23_Msk (0x1UL << PPI_CHENCLR_CH23_Pos) /*!< Bit mask of CH23 field. */ +#define PPI_CHENCLR_CH23_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH23_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH23_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 22 : Disable PPI channel 22. */ +#define PPI_CHENCLR_CH22_Pos (22UL) /*!< Position of CH22 field. */ +#define PPI_CHENCLR_CH22_Msk (0x1UL << PPI_CHENCLR_CH22_Pos) /*!< Bit mask of CH22 field. */ +#define PPI_CHENCLR_CH22_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH22_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH22_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 21 : Disable PPI channel 21. */ +#define PPI_CHENCLR_CH21_Pos (21UL) /*!< Position of CH21 field. */ +#define PPI_CHENCLR_CH21_Msk (0x1UL << PPI_CHENCLR_CH21_Pos) /*!< Bit mask of CH21 field. */ +#define PPI_CHENCLR_CH21_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH21_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH21_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 20 : Disable PPI channel 20. */ +#define PPI_CHENCLR_CH20_Pos (20UL) /*!< Position of CH20 field. */ +#define PPI_CHENCLR_CH20_Msk (0x1UL << PPI_CHENCLR_CH20_Pos) /*!< Bit mask of CH20 field. */ +#define PPI_CHENCLR_CH20_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH20_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH20_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 15 : Disable PPI channel 15. */ +#define PPI_CHENCLR_CH15_Pos (15UL) /*!< Position of CH15 field. */ +#define PPI_CHENCLR_CH15_Msk (0x1UL << PPI_CHENCLR_CH15_Pos) /*!< Bit mask of CH15 field. */ +#define PPI_CHENCLR_CH15_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH15_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH15_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 14 : Disable PPI channel 14. */ +#define PPI_CHENCLR_CH14_Pos (14UL) /*!< Position of CH14 field. */ +#define PPI_CHENCLR_CH14_Msk (0x1UL << PPI_CHENCLR_CH14_Pos) /*!< Bit mask of CH14 field. */ +#define PPI_CHENCLR_CH14_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH14_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH14_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 13 : Disable PPI channel 13. */ +#define PPI_CHENCLR_CH13_Pos (13UL) /*!< Position of CH13 field. */ +#define PPI_CHENCLR_CH13_Msk (0x1UL << PPI_CHENCLR_CH13_Pos) /*!< Bit mask of CH13 field. */ +#define PPI_CHENCLR_CH13_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH13_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH13_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 12 : Disable PPI channel 12. */ +#define PPI_CHENCLR_CH12_Pos (12UL) /*!< Position of CH12 field. */ +#define PPI_CHENCLR_CH12_Msk (0x1UL << PPI_CHENCLR_CH12_Pos) /*!< Bit mask of CH12 field. */ +#define PPI_CHENCLR_CH12_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH12_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH12_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 11 : Disable PPI channel 11. */ +#define PPI_CHENCLR_CH11_Pos (11UL) /*!< Position of CH11 field. */ +#define PPI_CHENCLR_CH11_Msk (0x1UL << PPI_CHENCLR_CH11_Pos) /*!< Bit mask of CH11 field. */ +#define PPI_CHENCLR_CH11_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH11_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH11_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 10 : Disable PPI channel 10. */ +#define PPI_CHENCLR_CH10_Pos (10UL) /*!< Position of CH10 field. */ +#define PPI_CHENCLR_CH10_Msk (0x1UL << PPI_CHENCLR_CH10_Pos) /*!< Bit mask of CH10 field. */ +#define PPI_CHENCLR_CH10_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH10_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH10_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 9 : Disable PPI channel 9. */ +#define PPI_CHENCLR_CH9_Pos (9UL) /*!< Position of CH9 field. */ +#define PPI_CHENCLR_CH9_Msk (0x1UL << PPI_CHENCLR_CH9_Pos) /*!< Bit mask of CH9 field. */ +#define PPI_CHENCLR_CH9_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH9_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH9_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 8 : Disable PPI channel 8. */ +#define PPI_CHENCLR_CH8_Pos (8UL) /*!< Position of CH8 field. */ +#define PPI_CHENCLR_CH8_Msk (0x1UL << PPI_CHENCLR_CH8_Pos) /*!< Bit mask of CH8 field. */ +#define PPI_CHENCLR_CH8_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH8_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH8_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 7 : Disable PPI channel 7. */ +#define PPI_CHENCLR_CH7_Pos (7UL) /*!< Position of CH7 field. */ +#define PPI_CHENCLR_CH7_Msk (0x1UL << PPI_CHENCLR_CH7_Pos) /*!< Bit mask of CH7 field. */ +#define PPI_CHENCLR_CH7_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH7_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH7_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 6 : Disable PPI channel 6. */ +#define PPI_CHENCLR_CH6_Pos (6UL) /*!< Position of CH6 field. */ +#define PPI_CHENCLR_CH6_Msk (0x1UL << PPI_CHENCLR_CH6_Pos) /*!< Bit mask of CH6 field. */ +#define PPI_CHENCLR_CH6_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH6_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH6_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 5 : Disable PPI channel 5. */ +#define PPI_CHENCLR_CH5_Pos (5UL) /*!< Position of CH5 field. */ +#define PPI_CHENCLR_CH5_Msk (0x1UL << PPI_CHENCLR_CH5_Pos) /*!< Bit mask of CH5 field. */ +#define PPI_CHENCLR_CH5_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH5_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH5_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 4 : Disable PPI channel 4. */ +#define PPI_CHENCLR_CH4_Pos (4UL) /*!< Position of CH4 field. */ +#define PPI_CHENCLR_CH4_Msk (0x1UL << PPI_CHENCLR_CH4_Pos) /*!< Bit mask of CH4 field. */ +#define PPI_CHENCLR_CH4_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH4_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH4_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 3 : Disable PPI channel 3. */ +#define PPI_CHENCLR_CH3_Pos (3UL) /*!< Position of CH3 field. */ +#define PPI_CHENCLR_CH3_Msk (0x1UL << PPI_CHENCLR_CH3_Pos) /*!< Bit mask of CH3 field. */ +#define PPI_CHENCLR_CH3_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH3_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH3_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 2 : Disable PPI channel 2. */ +#define PPI_CHENCLR_CH2_Pos (2UL) /*!< Position of CH2 field. */ +#define PPI_CHENCLR_CH2_Msk (0x1UL << PPI_CHENCLR_CH2_Pos) /*!< Bit mask of CH2 field. */ +#define PPI_CHENCLR_CH2_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH2_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH2_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 1 : Disable PPI channel 1. */ +#define PPI_CHENCLR_CH1_Pos (1UL) /*!< Position of CH1 field. */ +#define PPI_CHENCLR_CH1_Msk (0x1UL << PPI_CHENCLR_CH1_Pos) /*!< Bit mask of CH1 field. */ +#define PPI_CHENCLR_CH1_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH1_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH1_Clear (1UL) /*!< Disable channel on write. */ + +/* Bit 0 : Disable PPI channel 0. */ +#define PPI_CHENCLR_CH0_Pos (0UL) /*!< Position of CH0 field. */ +#define PPI_CHENCLR_CH0_Msk (0x1UL << PPI_CHENCLR_CH0_Pos) /*!< Bit mask of CH0 field. */ +#define PPI_CHENCLR_CH0_Disabled (0UL) /*!< Channel disabled. */ +#define PPI_CHENCLR_CH0_Enabled (1UL) /*!< Channel enabled. */ +#define PPI_CHENCLR_CH0_Clear (1UL) /*!< Disable channel on write. */ + +/* Register: PPI_CHG */ +/* Description: Channel group configuration. */ + +/* Bit 31 : Include CH31 in channel group. */ +#define PPI_CHG_CH31_Pos (31UL) /*!< Position of CH31 field. */ +#define PPI_CHG_CH31_Msk (0x1UL << PPI_CHG_CH31_Pos) /*!< Bit mask of CH31 field. */ +#define PPI_CHG_CH31_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH31_Included (1UL) /*!< Channel included. */ + +/* Bit 30 : Include CH30 in channel group. */ +#define PPI_CHG_CH30_Pos (30UL) /*!< Position of CH30 field. */ +#define PPI_CHG_CH30_Msk (0x1UL << PPI_CHG_CH30_Pos) /*!< Bit mask of CH30 field. */ +#define PPI_CHG_CH30_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH30_Included (1UL) /*!< Channel included. */ + +/* Bit 29 : Include CH29 in channel group. */ +#define PPI_CHG_CH29_Pos (29UL) /*!< Position of CH29 field. */ +#define PPI_CHG_CH29_Msk (0x1UL << PPI_CHG_CH29_Pos) /*!< Bit mask of CH29 field. */ +#define PPI_CHG_CH29_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH29_Included (1UL) /*!< Channel included. */ + +/* Bit 28 : Include CH28 in channel group. */ +#define PPI_CHG_CH28_Pos (28UL) /*!< Position of CH28 field. */ +#define PPI_CHG_CH28_Msk (0x1UL << PPI_CHG_CH28_Pos) /*!< Bit mask of CH28 field. */ +#define PPI_CHG_CH28_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH28_Included (1UL) /*!< Channel included. */ + +/* Bit 27 : Include CH27 in channel group. */ +#define PPI_CHG_CH27_Pos (27UL) /*!< Position of CH27 field. */ +#define PPI_CHG_CH27_Msk (0x1UL << PPI_CHG_CH27_Pos) /*!< Bit mask of CH27 field. */ +#define PPI_CHG_CH27_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH27_Included (1UL) /*!< Channel included. */ + +/* Bit 26 : Include CH26 in channel group. */ +#define PPI_CHG_CH26_Pos (26UL) /*!< Position of CH26 field. */ +#define PPI_CHG_CH26_Msk (0x1UL << PPI_CHG_CH26_Pos) /*!< Bit mask of CH26 field. */ +#define PPI_CHG_CH26_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH26_Included (1UL) /*!< Channel included. */ + +/* Bit 25 : Include CH25 in channel group. */ +#define PPI_CHG_CH25_Pos (25UL) /*!< Position of CH25 field. */ +#define PPI_CHG_CH25_Msk (0x1UL << PPI_CHG_CH25_Pos) /*!< Bit mask of CH25 field. */ +#define PPI_CHG_CH25_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH25_Included (1UL) /*!< Channel included. */ + +/* Bit 24 : Include CH24 in channel group. */ +#define PPI_CHG_CH24_Pos (24UL) /*!< Position of CH24 field. */ +#define PPI_CHG_CH24_Msk (0x1UL << PPI_CHG_CH24_Pos) /*!< Bit mask of CH24 field. */ +#define PPI_CHG_CH24_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH24_Included (1UL) /*!< Channel included. */ + +/* Bit 23 : Include CH23 in channel group. */ +#define PPI_CHG_CH23_Pos (23UL) /*!< Position of CH23 field. */ +#define PPI_CHG_CH23_Msk (0x1UL << PPI_CHG_CH23_Pos) /*!< Bit mask of CH23 field. */ +#define PPI_CHG_CH23_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH23_Included (1UL) /*!< Channel included. */ + +/* Bit 22 : Include CH22 in channel group. */ +#define PPI_CHG_CH22_Pos (22UL) /*!< Position of CH22 field. */ +#define PPI_CHG_CH22_Msk (0x1UL << PPI_CHG_CH22_Pos) /*!< Bit mask of CH22 field. */ +#define PPI_CHG_CH22_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH22_Included (1UL) /*!< Channel included. */ + +/* Bit 21 : Include CH21 in channel group. */ +#define PPI_CHG_CH21_Pos (21UL) /*!< Position of CH21 field. */ +#define PPI_CHG_CH21_Msk (0x1UL << PPI_CHG_CH21_Pos) /*!< Bit mask of CH21 field. */ +#define PPI_CHG_CH21_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH21_Included (1UL) /*!< Channel included. */ + +/* Bit 20 : Include CH20 in channel group. */ +#define PPI_CHG_CH20_Pos (20UL) /*!< Position of CH20 field. */ +#define PPI_CHG_CH20_Msk (0x1UL << PPI_CHG_CH20_Pos) /*!< Bit mask of CH20 field. */ +#define PPI_CHG_CH20_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH20_Included (1UL) /*!< Channel included. */ + +/* Bit 15 : Include CH15 in channel group. */ +#define PPI_CHG_CH15_Pos (15UL) /*!< Position of CH15 field. */ +#define PPI_CHG_CH15_Msk (0x1UL << PPI_CHG_CH15_Pos) /*!< Bit mask of CH15 field. */ +#define PPI_CHG_CH15_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH15_Included (1UL) /*!< Channel included. */ + +/* Bit 14 : Include CH14 in channel group. */ +#define PPI_CHG_CH14_Pos (14UL) /*!< Position of CH14 field. */ +#define PPI_CHG_CH14_Msk (0x1UL << PPI_CHG_CH14_Pos) /*!< Bit mask of CH14 field. */ +#define PPI_CHG_CH14_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH14_Included (1UL) /*!< Channel included. */ + +/* Bit 13 : Include CH13 in channel group. */ +#define PPI_CHG_CH13_Pos (13UL) /*!< Position of CH13 field. */ +#define PPI_CHG_CH13_Msk (0x1UL << PPI_CHG_CH13_Pos) /*!< Bit mask of CH13 field. */ +#define PPI_CHG_CH13_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH13_Included (1UL) /*!< Channel included. */ + +/* Bit 12 : Include CH12 in channel group. */ +#define PPI_CHG_CH12_Pos (12UL) /*!< Position of CH12 field. */ +#define PPI_CHG_CH12_Msk (0x1UL << PPI_CHG_CH12_Pos) /*!< Bit mask of CH12 field. */ +#define PPI_CHG_CH12_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH12_Included (1UL) /*!< Channel included. */ + +/* Bit 11 : Include CH11 in channel group. */ +#define PPI_CHG_CH11_Pos (11UL) /*!< Position of CH11 field. */ +#define PPI_CHG_CH11_Msk (0x1UL << PPI_CHG_CH11_Pos) /*!< Bit mask of CH11 field. */ +#define PPI_CHG_CH11_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH11_Included (1UL) /*!< Channel included. */ + +/* Bit 10 : Include CH10 in channel group. */ +#define PPI_CHG_CH10_Pos (10UL) /*!< Position of CH10 field. */ +#define PPI_CHG_CH10_Msk (0x1UL << PPI_CHG_CH10_Pos) /*!< Bit mask of CH10 field. */ +#define PPI_CHG_CH10_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH10_Included (1UL) /*!< Channel included. */ + +/* Bit 9 : Include CH9 in channel group. */ +#define PPI_CHG_CH9_Pos (9UL) /*!< Position of CH9 field. */ +#define PPI_CHG_CH9_Msk (0x1UL << PPI_CHG_CH9_Pos) /*!< Bit mask of CH9 field. */ +#define PPI_CHG_CH9_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH9_Included (1UL) /*!< Channel included. */ + +/* Bit 8 : Include CH8 in channel group. */ +#define PPI_CHG_CH8_Pos (8UL) /*!< Position of CH8 field. */ +#define PPI_CHG_CH8_Msk (0x1UL << PPI_CHG_CH8_Pos) /*!< Bit mask of CH8 field. */ +#define PPI_CHG_CH8_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH8_Included (1UL) /*!< Channel included. */ + +/* Bit 7 : Include CH7 in channel group. */ +#define PPI_CHG_CH7_Pos (7UL) /*!< Position of CH7 field. */ +#define PPI_CHG_CH7_Msk (0x1UL << PPI_CHG_CH7_Pos) /*!< Bit mask of CH7 field. */ +#define PPI_CHG_CH7_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH7_Included (1UL) /*!< Channel included. */ + +/* Bit 6 : Include CH6 in channel group. */ +#define PPI_CHG_CH6_Pos (6UL) /*!< Position of CH6 field. */ +#define PPI_CHG_CH6_Msk (0x1UL << PPI_CHG_CH6_Pos) /*!< Bit mask of CH6 field. */ +#define PPI_CHG_CH6_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH6_Included (1UL) /*!< Channel included. */ + +/* Bit 5 : Include CH5 in channel group. */ +#define PPI_CHG_CH5_Pos (5UL) /*!< Position of CH5 field. */ +#define PPI_CHG_CH5_Msk (0x1UL << PPI_CHG_CH5_Pos) /*!< Bit mask of CH5 field. */ +#define PPI_CHG_CH5_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH5_Included (1UL) /*!< Channel included. */ + +/* Bit 4 : Include CH4 in channel group. */ +#define PPI_CHG_CH4_Pos (4UL) /*!< Position of CH4 field. */ +#define PPI_CHG_CH4_Msk (0x1UL << PPI_CHG_CH4_Pos) /*!< Bit mask of CH4 field. */ +#define PPI_CHG_CH4_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH4_Included (1UL) /*!< Channel included. */ + +/* Bit 3 : Include CH3 in channel group. */ +#define PPI_CHG_CH3_Pos (3UL) /*!< Position of CH3 field. */ +#define PPI_CHG_CH3_Msk (0x1UL << PPI_CHG_CH3_Pos) /*!< Bit mask of CH3 field. */ +#define PPI_CHG_CH3_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH3_Included (1UL) /*!< Channel included. */ + +/* Bit 2 : Include CH2 in channel group. */ +#define PPI_CHG_CH2_Pos (2UL) /*!< Position of CH2 field. */ +#define PPI_CHG_CH2_Msk (0x1UL << PPI_CHG_CH2_Pos) /*!< Bit mask of CH2 field. */ +#define PPI_CHG_CH2_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH2_Included (1UL) /*!< Channel included. */ + +/* Bit 1 : Include CH1 in channel group. */ +#define PPI_CHG_CH1_Pos (1UL) /*!< Position of CH1 field. */ +#define PPI_CHG_CH1_Msk (0x1UL << PPI_CHG_CH1_Pos) /*!< Bit mask of CH1 field. */ +#define PPI_CHG_CH1_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH1_Included (1UL) /*!< Channel included. */ + +/* Bit 0 : Include CH0 in channel group. */ +#define PPI_CHG_CH0_Pos (0UL) /*!< Position of CH0 field. */ +#define PPI_CHG_CH0_Msk (0x1UL << PPI_CHG_CH0_Pos) /*!< Bit mask of CH0 field. */ +#define PPI_CHG_CH0_Excluded (0UL) /*!< Channel excluded. */ +#define PPI_CHG_CH0_Included (1UL) /*!< Channel included. */ + + +/* Peripheral: PU */ +/* Description: Patch unit. */ + +/* Register: PU_PATCHADDR */ +/* Description: Relative address of patch instructions. */ + +/* Bits 24..0 : Relative address of patch instructions. */ +#define PU_PATCHADDR_PATCHADDR_Pos (0UL) /*!< Position of PATCHADDR field. */ +#define PU_PATCHADDR_PATCHADDR_Msk (0x1FFFFFFUL << PU_PATCHADDR_PATCHADDR_Pos) /*!< Bit mask of PATCHADDR field. */ + +/* Register: PU_PATCHEN */ +/* Description: Patch enable register. */ + +/* Bit 7 : Patch 7 enabled. */ +#define PU_PATCHEN_PATCH7_Pos (7UL) /*!< Position of PATCH7 field. */ +#define PU_PATCHEN_PATCH7_Msk (0x1UL << PU_PATCHEN_PATCH7_Pos) /*!< Bit mask of PATCH7 field. */ +#define PU_PATCHEN_PATCH7_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH7_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 6 : Patch 6 enabled. */ +#define PU_PATCHEN_PATCH6_Pos (6UL) /*!< Position of PATCH6 field. */ +#define PU_PATCHEN_PATCH6_Msk (0x1UL << PU_PATCHEN_PATCH6_Pos) /*!< Bit mask of PATCH6 field. */ +#define PU_PATCHEN_PATCH6_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH6_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 5 : Patch 5 enabled. */ +#define PU_PATCHEN_PATCH5_Pos (5UL) /*!< Position of PATCH5 field. */ +#define PU_PATCHEN_PATCH5_Msk (0x1UL << PU_PATCHEN_PATCH5_Pos) /*!< Bit mask of PATCH5 field. */ +#define PU_PATCHEN_PATCH5_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH5_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 4 : Patch 4 enabled. */ +#define PU_PATCHEN_PATCH4_Pos (4UL) /*!< Position of PATCH4 field. */ +#define PU_PATCHEN_PATCH4_Msk (0x1UL << PU_PATCHEN_PATCH4_Pos) /*!< Bit mask of PATCH4 field. */ +#define PU_PATCHEN_PATCH4_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH4_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 3 : Patch 3 enabled. */ +#define PU_PATCHEN_PATCH3_Pos (3UL) /*!< Position of PATCH3 field. */ +#define PU_PATCHEN_PATCH3_Msk (0x1UL << PU_PATCHEN_PATCH3_Pos) /*!< Bit mask of PATCH3 field. */ +#define PU_PATCHEN_PATCH3_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH3_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 2 : Patch 2 enabled. */ +#define PU_PATCHEN_PATCH2_Pos (2UL) /*!< Position of PATCH2 field. */ +#define PU_PATCHEN_PATCH2_Msk (0x1UL << PU_PATCHEN_PATCH2_Pos) /*!< Bit mask of PATCH2 field. */ +#define PU_PATCHEN_PATCH2_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH2_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 1 : Patch 1 enabled. */ +#define PU_PATCHEN_PATCH1_Pos (1UL) /*!< Position of PATCH1 field. */ +#define PU_PATCHEN_PATCH1_Msk (0x1UL << PU_PATCHEN_PATCH1_Pos) /*!< Bit mask of PATCH1 field. */ +#define PU_PATCHEN_PATCH1_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH1_Enabled (1UL) /*!< Patch enabled. */ + +/* Bit 0 : Patch 0 enabled. */ +#define PU_PATCHEN_PATCH0_Pos (0UL) /*!< Position of PATCH0 field. */ +#define PU_PATCHEN_PATCH0_Msk (0x1UL << PU_PATCHEN_PATCH0_Pos) /*!< Bit mask of PATCH0 field. */ +#define PU_PATCHEN_PATCH0_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHEN_PATCH0_Enabled (1UL) /*!< Patch enabled. */ + +/* Register: PU_PATCHENSET */ +/* Description: Patch enable register. */ + +/* Bit 7 : Patch 7 enabled. */ +#define PU_PATCHENSET_PATCH7_Pos (7UL) /*!< Position of PATCH7 field. */ +#define PU_PATCHENSET_PATCH7_Msk (0x1UL << PU_PATCHENSET_PATCH7_Pos) /*!< Bit mask of PATCH7 field. */ +#define PU_PATCHENSET_PATCH7_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH7_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH7_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 6 : Patch 6 enabled. */ +#define PU_PATCHENSET_PATCH6_Pos (6UL) /*!< Position of PATCH6 field. */ +#define PU_PATCHENSET_PATCH6_Msk (0x1UL << PU_PATCHENSET_PATCH6_Pos) /*!< Bit mask of PATCH6 field. */ +#define PU_PATCHENSET_PATCH6_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH6_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH6_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 5 : Patch 5 enabled. */ +#define PU_PATCHENSET_PATCH5_Pos (5UL) /*!< Position of PATCH5 field. */ +#define PU_PATCHENSET_PATCH5_Msk (0x1UL << PU_PATCHENSET_PATCH5_Pos) /*!< Bit mask of PATCH5 field. */ +#define PU_PATCHENSET_PATCH5_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH5_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH5_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 4 : Patch 4 enabled. */ +#define PU_PATCHENSET_PATCH4_Pos (4UL) /*!< Position of PATCH4 field. */ +#define PU_PATCHENSET_PATCH4_Msk (0x1UL << PU_PATCHENSET_PATCH4_Pos) /*!< Bit mask of PATCH4 field. */ +#define PU_PATCHENSET_PATCH4_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH4_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH4_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 3 : Patch 3 enabled. */ +#define PU_PATCHENSET_PATCH3_Pos (3UL) /*!< Position of PATCH3 field. */ +#define PU_PATCHENSET_PATCH3_Msk (0x1UL << PU_PATCHENSET_PATCH3_Pos) /*!< Bit mask of PATCH3 field. */ +#define PU_PATCHENSET_PATCH3_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH3_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH3_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 2 : Patch 2 enabled. */ +#define PU_PATCHENSET_PATCH2_Pos (2UL) /*!< Position of PATCH2 field. */ +#define PU_PATCHENSET_PATCH2_Msk (0x1UL << PU_PATCHENSET_PATCH2_Pos) /*!< Bit mask of PATCH2 field. */ +#define PU_PATCHENSET_PATCH2_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH2_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH2_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 1 : Patch 1 enabled. */ +#define PU_PATCHENSET_PATCH1_Pos (1UL) /*!< Position of PATCH1 field. */ +#define PU_PATCHENSET_PATCH1_Msk (0x1UL << PU_PATCHENSET_PATCH1_Pos) /*!< Bit mask of PATCH1 field. */ +#define PU_PATCHENSET_PATCH1_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH1_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH1_Set (1UL) /*!< Enable patch on write. */ + +/* Bit 0 : Patch 0 enabled. */ +#define PU_PATCHENSET_PATCH0_Pos (0UL) /*!< Position of PATCH0 field. */ +#define PU_PATCHENSET_PATCH0_Msk (0x1UL << PU_PATCHENSET_PATCH0_Pos) /*!< Bit mask of PATCH0 field. */ +#define PU_PATCHENSET_PATCH0_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENSET_PATCH0_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENSET_PATCH0_Set (1UL) /*!< Enable patch on write. */ + +/* Register: PU_PATCHENCLR */ +/* Description: Patch disable register. */ + +/* Bit 7 : Patch 7 enabled. */ +#define PU_PATCHENCLR_PATCH7_Pos (7UL) /*!< Position of PATCH7 field. */ +#define PU_PATCHENCLR_PATCH7_Msk (0x1UL << PU_PATCHENCLR_PATCH7_Pos) /*!< Bit mask of PATCH7 field. */ +#define PU_PATCHENCLR_PATCH7_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH7_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH7_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 6 : Patch 6 enabled. */ +#define PU_PATCHENCLR_PATCH6_Pos (6UL) /*!< Position of PATCH6 field. */ +#define PU_PATCHENCLR_PATCH6_Msk (0x1UL << PU_PATCHENCLR_PATCH6_Pos) /*!< Bit mask of PATCH6 field. */ +#define PU_PATCHENCLR_PATCH6_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH6_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH6_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 5 : Patch 5 enabled. */ +#define PU_PATCHENCLR_PATCH5_Pos (5UL) /*!< Position of PATCH5 field. */ +#define PU_PATCHENCLR_PATCH5_Msk (0x1UL << PU_PATCHENCLR_PATCH5_Pos) /*!< Bit mask of PATCH5 field. */ +#define PU_PATCHENCLR_PATCH5_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH5_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH5_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 4 : Patch 4 enabled. */ +#define PU_PATCHENCLR_PATCH4_Pos (4UL) /*!< Position of PATCH4 field. */ +#define PU_PATCHENCLR_PATCH4_Msk (0x1UL << PU_PATCHENCLR_PATCH4_Pos) /*!< Bit mask of PATCH4 field. */ +#define PU_PATCHENCLR_PATCH4_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH4_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH4_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 3 : Patch 3 enabled. */ +#define PU_PATCHENCLR_PATCH3_Pos (3UL) /*!< Position of PATCH3 field. */ +#define PU_PATCHENCLR_PATCH3_Msk (0x1UL << PU_PATCHENCLR_PATCH3_Pos) /*!< Bit mask of PATCH3 field. */ +#define PU_PATCHENCLR_PATCH3_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH3_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH3_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 2 : Patch 2 enabled. */ +#define PU_PATCHENCLR_PATCH2_Pos (2UL) /*!< Position of PATCH2 field. */ +#define PU_PATCHENCLR_PATCH2_Msk (0x1UL << PU_PATCHENCLR_PATCH2_Pos) /*!< Bit mask of PATCH2 field. */ +#define PU_PATCHENCLR_PATCH2_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH2_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH2_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 1 : Patch 1 enabled. */ +#define PU_PATCHENCLR_PATCH1_Pos (1UL) /*!< Position of PATCH1 field. */ +#define PU_PATCHENCLR_PATCH1_Msk (0x1UL << PU_PATCHENCLR_PATCH1_Pos) /*!< Bit mask of PATCH1 field. */ +#define PU_PATCHENCLR_PATCH1_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH1_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH1_Clear (1UL) /*!< Disable patch on write. */ + +/* Bit 0 : Patch 0 enabled. */ +#define PU_PATCHENCLR_PATCH0_Pos (0UL) /*!< Position of PATCH0 field. */ +#define PU_PATCHENCLR_PATCH0_Msk (0x1UL << PU_PATCHENCLR_PATCH0_Pos) /*!< Bit mask of PATCH0 field. */ +#define PU_PATCHENCLR_PATCH0_Disabled (0UL) /*!< Patch disabled. */ +#define PU_PATCHENCLR_PATCH0_Enabled (1UL) /*!< Patch enabled. */ +#define PU_PATCHENCLR_PATCH0_Clear (1UL) /*!< Disable patch on write. */ + + +/* Peripheral: QDEC */ +/* Description: Rotary decoder. */ + +/* Register: QDEC_SHORTS */ +/* Description: Shortcut for the QDEC. */ + +/* Bit 1 : Short-cut between SAMPLERDY event and STOP task. */ +#define QDEC_SHORTS_SAMPLERDY_STOP_Pos (1UL) /*!< Position of SAMPLERDY_STOP field. */ +#define QDEC_SHORTS_SAMPLERDY_STOP_Msk (0x1UL << QDEC_SHORTS_SAMPLERDY_STOP_Pos) /*!< Bit mask of SAMPLERDY_STOP field. */ +#define QDEC_SHORTS_SAMPLERDY_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define QDEC_SHORTS_SAMPLERDY_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 0 : Short-cut between REPORTRDY event and READCLRACC task. */ +#define QDEC_SHORTS_REPORTRDY_READCLRACC_Pos (0UL) /*!< Position of REPORTRDY_READCLRACC field. */ +#define QDEC_SHORTS_REPORTRDY_READCLRACC_Msk (0x1UL << QDEC_SHORTS_REPORTRDY_READCLRACC_Pos) /*!< Bit mask of REPORTRDY_READCLRACC field. */ +#define QDEC_SHORTS_REPORTRDY_READCLRACC_Disabled (0UL) /*!< Shortcut disabled. */ +#define QDEC_SHORTS_REPORTRDY_READCLRACC_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: QDEC_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 2 : Enable interrupt on ACCOF event. */ +#define QDEC_INTENSET_ACCOF_Pos (2UL) /*!< Position of ACCOF field. */ +#define QDEC_INTENSET_ACCOF_Msk (0x1UL << QDEC_INTENSET_ACCOF_Pos) /*!< Bit mask of ACCOF field. */ +#define QDEC_INTENSET_ACCOF_Disabled (0UL) /*!< Interrupt disabled. */ +#define QDEC_INTENSET_ACCOF_Enabled (1UL) /*!< Interrupt enabled. */ +#define QDEC_INTENSET_ACCOF_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on REPORTRDY event. */ +#define QDEC_INTENSET_REPORTRDY_Pos (1UL) /*!< Position of REPORTRDY field. */ +#define QDEC_INTENSET_REPORTRDY_Msk (0x1UL << QDEC_INTENSET_REPORTRDY_Pos) /*!< Bit mask of REPORTRDY field. */ +#define QDEC_INTENSET_REPORTRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define QDEC_INTENSET_REPORTRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define QDEC_INTENSET_REPORTRDY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on SAMPLERDY event. */ +#define QDEC_INTENSET_SAMPLERDY_Pos (0UL) /*!< Position of SAMPLERDY field. */ +#define QDEC_INTENSET_SAMPLERDY_Msk (0x1UL << QDEC_INTENSET_SAMPLERDY_Pos) /*!< Bit mask of SAMPLERDY field. */ +#define QDEC_INTENSET_SAMPLERDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define QDEC_INTENSET_SAMPLERDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define QDEC_INTENSET_SAMPLERDY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: QDEC_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 2 : Disable interrupt on ACCOF event. */ +#define QDEC_INTENCLR_ACCOF_Pos (2UL) /*!< Position of ACCOF field. */ +#define QDEC_INTENCLR_ACCOF_Msk (0x1UL << QDEC_INTENCLR_ACCOF_Pos) /*!< Bit mask of ACCOF field. */ +#define QDEC_INTENCLR_ACCOF_Disabled (0UL) /*!< Interrupt disabled. */ +#define QDEC_INTENCLR_ACCOF_Enabled (1UL) /*!< Interrupt enabled. */ +#define QDEC_INTENCLR_ACCOF_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on REPORTRDY event. */ +#define QDEC_INTENCLR_REPORTRDY_Pos (1UL) /*!< Position of REPORTRDY field. */ +#define QDEC_INTENCLR_REPORTRDY_Msk (0x1UL << QDEC_INTENCLR_REPORTRDY_Pos) /*!< Bit mask of REPORTRDY field. */ +#define QDEC_INTENCLR_REPORTRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define QDEC_INTENCLR_REPORTRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define QDEC_INTENCLR_REPORTRDY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on SAMPLERDY event. */ +#define QDEC_INTENCLR_SAMPLERDY_Pos (0UL) /*!< Position of SAMPLERDY field. */ +#define QDEC_INTENCLR_SAMPLERDY_Msk (0x1UL << QDEC_INTENCLR_SAMPLERDY_Pos) /*!< Bit mask of SAMPLERDY field. */ +#define QDEC_INTENCLR_SAMPLERDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define QDEC_INTENCLR_SAMPLERDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define QDEC_INTENCLR_SAMPLERDY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: QDEC_ENABLE */ +/* Description: Enable the QDEC. */ + +/* Bit 0 : Enable or disable QDEC. */ +#define QDEC_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define QDEC_ENABLE_ENABLE_Msk (0x1UL << QDEC_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define QDEC_ENABLE_ENABLE_Disabled (0UL) /*!< Disabled QDEC. */ +#define QDEC_ENABLE_ENABLE_Enabled (1UL) /*!< Enable QDEC. */ + +/* Register: QDEC_LEDPOL */ +/* Description: LED output pin polarity. */ + +/* Bit 0 : LED output pin polarity. */ +#define QDEC_LEDPOL_LEDPOL_Pos (0UL) /*!< Position of LEDPOL field. */ +#define QDEC_LEDPOL_LEDPOL_Msk (0x1UL << QDEC_LEDPOL_LEDPOL_Pos) /*!< Bit mask of LEDPOL field. */ +#define QDEC_LEDPOL_LEDPOL_ActiveLow (0UL) /*!< LED output is active low. */ +#define QDEC_LEDPOL_LEDPOL_ActiveHigh (1UL) /*!< LED output is active high. */ + +/* Register: QDEC_SAMPLEPER */ +/* Description: Sample period. */ + +/* Bits 2..0 : Sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_Pos (0UL) /*!< Position of SAMPLEPER field. */ +#define QDEC_SAMPLEPER_SAMPLEPER_Msk (0x7UL << QDEC_SAMPLEPER_SAMPLEPER_Pos) /*!< Bit mask of SAMPLEPER field. */ +#define QDEC_SAMPLEPER_SAMPLEPER_128us (0x00UL) /*!< 128us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_256us (0x01UL) /*!< 256us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_512us (0x02UL) /*!< 512us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_1024us (0x03UL) /*!< 1024us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_2048us (0x04UL) /*!< 2048us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_4096us (0x05UL) /*!< 4096us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_8192us (0x06UL) /*!< 8192us sample period. */ +#define QDEC_SAMPLEPER_SAMPLEPER_16384us (0x07UL) /*!< 16384us sample period. */ + +/* Register: QDEC_SAMPLE */ +/* Description: Motion sample value. */ + +/* Bits 31..0 : Last sample taken in compliment to 2. */ +#define QDEC_SAMPLE_SAMPLE_Pos (0UL) /*!< Position of SAMPLE field. */ +#define QDEC_SAMPLE_SAMPLE_Msk (0xFFFFFFFFUL << QDEC_SAMPLE_SAMPLE_Pos) /*!< Bit mask of SAMPLE field. */ + +/* Register: QDEC_REPORTPER */ +/* Description: Number of samples to generate an EVENT_REPORTRDY. */ + +/* Bits 2..0 : Number of samples to generate an EVENT_REPORTRDY. */ +#define QDEC_REPORTPER_REPORTPER_Pos (0UL) /*!< Position of REPORTPER field. */ +#define QDEC_REPORTPER_REPORTPER_Msk (0x7UL << QDEC_REPORTPER_REPORTPER_Pos) /*!< Bit mask of REPORTPER field. */ +#define QDEC_REPORTPER_REPORTPER_10Smpl (0x00UL) /*!< 10 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_40Smpl (0x01UL) /*!< 40 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_80Smpl (0x02UL) /*!< 80 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_120Smpl (0x03UL) /*!< 120 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_160Smpl (0x04UL) /*!< 160 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_200Smpl (0x05UL) /*!< 200 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_240Smpl (0x06UL) /*!< 240 samples per report. */ +#define QDEC_REPORTPER_REPORTPER_280Smpl (0x07UL) /*!< 280 samples per report. */ + +/* Register: QDEC_DBFEN */ +/* Description: Enable debouncer input filters. */ + +/* Bit 0 : Enable debounce input filters. */ +#define QDEC_DBFEN_DBFEN_Pos (0UL) /*!< Position of DBFEN field. */ +#define QDEC_DBFEN_DBFEN_Msk (0x1UL << QDEC_DBFEN_DBFEN_Pos) /*!< Bit mask of DBFEN field. */ +#define QDEC_DBFEN_DBFEN_Disabled (0UL) /*!< Debounce input filters disabled. */ +#define QDEC_DBFEN_DBFEN_Enabled (1UL) /*!< Debounce input filters enabled. */ + +/* Register: QDEC_LEDPRE */ +/* Description: Time LED is switched ON before the sample. */ + +/* Bits 7..0 : Period in us the LED in switched on prior to sampling. */ +#define QDEC_LEDPRE_LEDPRE_Pos (0UL) /*!< Position of LEDPRE field. */ +#define QDEC_LEDPRE_LEDPRE_Msk (0xFFUL << QDEC_LEDPRE_LEDPRE_Pos) /*!< Bit mask of LEDPRE field. */ + +/* Register: QDEC_ACCDBL */ +/* Description: Accumulated double (error) transitions register. */ + +/* Bits 3..0 : Accumulated double (error) transitions. */ +#define QDEC_ACCDBL_ACCDBL_Pos (0UL) /*!< Position of ACCDBL field. */ +#define QDEC_ACCDBL_ACCDBL_Msk (0xFUL << QDEC_ACCDBL_ACCDBL_Pos) /*!< Bit mask of ACCDBL field. */ + +/* Register: QDEC_ACCDBLREAD */ +/* Description: Snapshot of ACCDBL register. Value generated by the TASKS_READCLEACC task. */ + +/* Bits 3..0 : Snapshot of accumulated double (error) transitions. */ +#define QDEC_ACCDBLREAD_ACCDBLREAD_Pos (0UL) /*!< Position of ACCDBLREAD field. */ +#define QDEC_ACCDBLREAD_ACCDBLREAD_Msk (0xFUL << QDEC_ACCDBLREAD_ACCDBLREAD_Pos) /*!< Bit mask of ACCDBLREAD field. */ + +/* Register: QDEC_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define QDEC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define QDEC_POWER_POWER_Msk (0x1UL << QDEC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define QDEC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define QDEC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: RADIO */ +/* Description: The radio. */ + +/* Register: RADIO_SHORTS */ +/* Description: Shortcut for the radio. */ + +/* Bit 8 : Shortcut between DISABLED event and RSSISTOP task. */ +#define RADIO_SHORTS_DISABLED_RSSISTOP_Pos (8UL) /*!< Position of DISABLED_RSSISTOP field. */ +#define RADIO_SHORTS_DISABLED_RSSISTOP_Msk (0x1UL << RADIO_SHORTS_DISABLED_RSSISTOP_Pos) /*!< Bit mask of DISABLED_RSSISTOP field. */ +#define RADIO_SHORTS_DISABLED_RSSISTOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_DISABLED_RSSISTOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 6 : Shortcut between ADDRESS event and BCSTART task. */ +#define RADIO_SHORTS_ADDRESS_BCSTART_Pos (6UL) /*!< Position of ADDRESS_BCSTART field. */ +#define RADIO_SHORTS_ADDRESS_BCSTART_Msk (0x1UL << RADIO_SHORTS_ADDRESS_BCSTART_Pos) /*!< Bit mask of ADDRESS_BCSTART field. */ +#define RADIO_SHORTS_ADDRESS_BCSTART_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_ADDRESS_BCSTART_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 5 : Shortcut between END event and START task. */ +#define RADIO_SHORTS_END_START_Pos (5UL) /*!< Position of END_START field. */ +#define RADIO_SHORTS_END_START_Msk (0x1UL << RADIO_SHORTS_END_START_Pos) /*!< Bit mask of END_START field. */ +#define RADIO_SHORTS_END_START_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_END_START_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 4 : Shortcut between ADDRESS event and RSSISTART task. */ +#define RADIO_SHORTS_ADDRESS_RSSISTART_Pos (4UL) /*!< Position of ADDRESS_RSSISTART field. */ +#define RADIO_SHORTS_ADDRESS_RSSISTART_Msk (0x1UL << RADIO_SHORTS_ADDRESS_RSSISTART_Pos) /*!< Bit mask of ADDRESS_RSSISTART field. */ +#define RADIO_SHORTS_ADDRESS_RSSISTART_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_ADDRESS_RSSISTART_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 3 : Shortcut between DISABLED event and RXEN task. */ +#define RADIO_SHORTS_DISABLED_RXEN_Pos (3UL) /*!< Position of DISABLED_RXEN field. */ +#define RADIO_SHORTS_DISABLED_RXEN_Msk (0x1UL << RADIO_SHORTS_DISABLED_RXEN_Pos) /*!< Bit mask of DISABLED_RXEN field. */ +#define RADIO_SHORTS_DISABLED_RXEN_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_DISABLED_RXEN_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 2 : Shortcut between DISABLED event and TXEN task. */ +#define RADIO_SHORTS_DISABLED_TXEN_Pos (2UL) /*!< Position of DISABLED_TXEN field. */ +#define RADIO_SHORTS_DISABLED_TXEN_Msk (0x1UL << RADIO_SHORTS_DISABLED_TXEN_Pos) /*!< Bit mask of DISABLED_TXEN field. */ +#define RADIO_SHORTS_DISABLED_TXEN_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_DISABLED_TXEN_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 1 : Shortcut between END event and DISABLE task. */ +#define RADIO_SHORTS_END_DISABLE_Pos (1UL) /*!< Position of END_DISABLE field. */ +#define RADIO_SHORTS_END_DISABLE_Msk (0x1UL << RADIO_SHORTS_END_DISABLE_Pos) /*!< Bit mask of END_DISABLE field. */ +#define RADIO_SHORTS_END_DISABLE_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_END_DISABLE_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 0 : Shortcut between READY event and START task. */ +#define RADIO_SHORTS_READY_START_Pos (0UL) /*!< Position of READY_START field. */ +#define RADIO_SHORTS_READY_START_Msk (0x1UL << RADIO_SHORTS_READY_START_Pos) /*!< Bit mask of READY_START field. */ +#define RADIO_SHORTS_READY_START_Disabled (0UL) /*!< Shortcut disabled. */ +#define RADIO_SHORTS_READY_START_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: RADIO_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 10 : Enable interrupt on BCMATCH event. */ +#define RADIO_INTENSET_BCMATCH_Pos (10UL) /*!< Position of BCMATCH field. */ +#define RADIO_INTENSET_BCMATCH_Msk (0x1UL << RADIO_INTENSET_BCMATCH_Pos) /*!< Bit mask of BCMATCH field. */ +#define RADIO_INTENSET_BCMATCH_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_BCMATCH_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_BCMATCH_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 7 : Enable interrupt on RSSIEND event. */ +#define RADIO_INTENSET_RSSIEND_Pos (7UL) /*!< Position of RSSIEND field. */ +#define RADIO_INTENSET_RSSIEND_Msk (0x1UL << RADIO_INTENSET_RSSIEND_Pos) /*!< Bit mask of RSSIEND field. */ +#define RADIO_INTENSET_RSSIEND_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_RSSIEND_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_RSSIEND_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 6 : Enable interrupt on DEVMISS event. */ +#define RADIO_INTENSET_DEVMISS_Pos (6UL) /*!< Position of DEVMISS field. */ +#define RADIO_INTENSET_DEVMISS_Msk (0x1UL << RADIO_INTENSET_DEVMISS_Pos) /*!< Bit mask of DEVMISS field. */ +#define RADIO_INTENSET_DEVMISS_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_DEVMISS_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_DEVMISS_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 5 : Enable interrupt on DEVMATCH event. */ +#define RADIO_INTENSET_DEVMATCH_Pos (5UL) /*!< Position of DEVMATCH field. */ +#define RADIO_INTENSET_DEVMATCH_Msk (0x1UL << RADIO_INTENSET_DEVMATCH_Pos) /*!< Bit mask of DEVMATCH field. */ +#define RADIO_INTENSET_DEVMATCH_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_DEVMATCH_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_DEVMATCH_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 4 : Enable interrupt on DISABLED event. */ +#define RADIO_INTENSET_DISABLED_Pos (4UL) /*!< Position of DISABLED field. */ +#define RADIO_INTENSET_DISABLED_Msk (0x1UL << RADIO_INTENSET_DISABLED_Pos) /*!< Bit mask of DISABLED field. */ +#define RADIO_INTENSET_DISABLED_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_DISABLED_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_DISABLED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 3 : Enable interrupt on END event. */ +#define RADIO_INTENSET_END_Pos (3UL) /*!< Position of END field. */ +#define RADIO_INTENSET_END_Msk (0x1UL << RADIO_INTENSET_END_Pos) /*!< Bit mask of END field. */ +#define RADIO_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 2 : Enable interrupt on PAYLOAD event. */ +#define RADIO_INTENSET_PAYLOAD_Pos (2UL) /*!< Position of PAYLOAD field. */ +#define RADIO_INTENSET_PAYLOAD_Msk (0x1UL << RADIO_INTENSET_PAYLOAD_Pos) /*!< Bit mask of PAYLOAD field. */ +#define RADIO_INTENSET_PAYLOAD_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_PAYLOAD_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_PAYLOAD_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on ADDRESS event. */ +#define RADIO_INTENSET_ADDRESS_Pos (1UL) /*!< Position of ADDRESS field. */ +#define RADIO_INTENSET_ADDRESS_Msk (0x1UL << RADIO_INTENSET_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */ +#define RADIO_INTENSET_ADDRESS_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_ADDRESS_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_ADDRESS_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on READY event. */ +#define RADIO_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */ +#define RADIO_INTENSET_READY_Msk (0x1UL << RADIO_INTENSET_READY_Pos) /*!< Bit mask of READY field. */ +#define RADIO_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: RADIO_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 10 : Disable interrupt on BCMATCH event. */ +#define RADIO_INTENCLR_BCMATCH_Pos (10UL) /*!< Position of BCMATCH field. */ +#define RADIO_INTENCLR_BCMATCH_Msk (0x1UL << RADIO_INTENCLR_BCMATCH_Pos) /*!< Bit mask of BCMATCH field. */ +#define RADIO_INTENCLR_BCMATCH_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_BCMATCH_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_BCMATCH_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 7 : Disable interrupt on RSSIEND event. */ +#define RADIO_INTENCLR_RSSIEND_Pos (7UL) /*!< Position of RSSIEND field. */ +#define RADIO_INTENCLR_RSSIEND_Msk (0x1UL << RADIO_INTENCLR_RSSIEND_Pos) /*!< Bit mask of RSSIEND field. */ +#define RADIO_INTENCLR_RSSIEND_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_RSSIEND_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_RSSIEND_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 6 : Disable interrupt on DEVMISS event. */ +#define RADIO_INTENCLR_DEVMISS_Pos (6UL) /*!< Position of DEVMISS field. */ +#define RADIO_INTENCLR_DEVMISS_Msk (0x1UL << RADIO_INTENCLR_DEVMISS_Pos) /*!< Bit mask of DEVMISS field. */ +#define RADIO_INTENCLR_DEVMISS_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_DEVMISS_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_DEVMISS_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 5 : Disable interrupt on DEVMATCH event. */ +#define RADIO_INTENCLR_DEVMATCH_Pos (5UL) /*!< Position of DEVMATCH field. */ +#define RADIO_INTENCLR_DEVMATCH_Msk (0x1UL << RADIO_INTENCLR_DEVMATCH_Pos) /*!< Bit mask of DEVMATCH field. */ +#define RADIO_INTENCLR_DEVMATCH_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_DEVMATCH_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_DEVMATCH_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 4 : Disable interrupt on DISABLED event. */ +#define RADIO_INTENCLR_DISABLED_Pos (4UL) /*!< Position of DISABLED field. */ +#define RADIO_INTENCLR_DISABLED_Msk (0x1UL << RADIO_INTENCLR_DISABLED_Pos) /*!< Bit mask of DISABLED field. */ +#define RADIO_INTENCLR_DISABLED_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_DISABLED_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_DISABLED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 3 : Disable interrupt on END event. */ +#define RADIO_INTENCLR_END_Pos (3UL) /*!< Position of END field. */ +#define RADIO_INTENCLR_END_Msk (0x1UL << RADIO_INTENCLR_END_Pos) /*!< Bit mask of END field. */ +#define RADIO_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 2 : Disable interrupt on PAYLOAD event. */ +#define RADIO_INTENCLR_PAYLOAD_Pos (2UL) /*!< Position of PAYLOAD field. */ +#define RADIO_INTENCLR_PAYLOAD_Msk (0x1UL << RADIO_INTENCLR_PAYLOAD_Pos) /*!< Bit mask of PAYLOAD field. */ +#define RADIO_INTENCLR_PAYLOAD_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_PAYLOAD_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_PAYLOAD_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on ADDRESS event. */ +#define RADIO_INTENCLR_ADDRESS_Pos (1UL) /*!< Position of ADDRESS field. */ +#define RADIO_INTENCLR_ADDRESS_Msk (0x1UL << RADIO_INTENCLR_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */ +#define RADIO_INTENCLR_ADDRESS_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_ADDRESS_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_ADDRESS_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on READY event. */ +#define RADIO_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */ +#define RADIO_INTENCLR_READY_Msk (0x1UL << RADIO_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */ +#define RADIO_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define RADIO_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define RADIO_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: RADIO_CRCSTATUS */ +/* Description: CRC status of received packet. */ + +/* Bit 0 : CRC status of received packet. */ +#define RADIO_CRCSTATUS_CRCSTATUS_Pos (0UL) /*!< Position of CRCSTATUS field. */ +#define RADIO_CRCSTATUS_CRCSTATUS_Msk (0x1UL << RADIO_CRCSTATUS_CRCSTATUS_Pos) /*!< Bit mask of CRCSTATUS field. */ +#define RADIO_CRCSTATUS_CRCSTATUS_CRCError (0UL) /*!< Packet received with CRC error. */ +#define RADIO_CRCSTATUS_CRCSTATUS_CRCOk (1UL) /*!< Packet received with CRC ok. */ + +/* Register: RADIO_RXMATCH */ +/* Description: Received address. */ + +/* Bits 2..0 : Logical address in which previous packet was received. */ +#define RADIO_RXMATCH_RXMATCH_Pos (0UL) /*!< Position of RXMATCH field. */ +#define RADIO_RXMATCH_RXMATCH_Msk (0x7UL << RADIO_RXMATCH_RXMATCH_Pos) /*!< Bit mask of RXMATCH field. */ + +/* Register: RADIO_RXCRC */ +/* Description: Received CRC. */ + +/* Bits 23..0 : CRC field of previously received packet. */ +#define RADIO_RXCRC_RXCRC_Pos (0UL) /*!< Position of RXCRC field. */ +#define RADIO_RXCRC_RXCRC_Msk (0xFFFFFFUL << RADIO_RXCRC_RXCRC_Pos) /*!< Bit mask of RXCRC field. */ + +/* Register: RADIO_DAI */ +/* Description: Device address match index. */ + +/* Bits 2..0 : Index (n) of device address (see DAB[n] and DAP[n]) that got an address match. */ +#define RADIO_DAI_DAI_Pos (0UL) /*!< Position of DAI field. */ +#define RADIO_DAI_DAI_Msk (0x7UL << RADIO_DAI_DAI_Pos) /*!< Bit mask of DAI field. */ + +/* Register: RADIO_FREQUENCY */ +/* Description: Frequency. */ + +/* Bits 6..0 : Radio channel frequency offset in MHz: RF Frequency = 2400 + FREQUENCY (MHz). Decision point: TXEN or RXEN task. */ +#define RADIO_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ +#define RADIO_FREQUENCY_FREQUENCY_Msk (0x7FUL << RADIO_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ + +/* Register: RADIO_TXPOWER */ +/* Description: Output power. */ + +/* Bits 7..0 : Radio output power. Decision point: TXEN task. */ +#define RADIO_TXPOWER_TXPOWER_Pos (0UL) /*!< Position of TXPOWER field. */ +#define RADIO_TXPOWER_TXPOWER_Msk (0xFFUL << RADIO_TXPOWER_TXPOWER_Pos) /*!< Bit mask of TXPOWER field. */ +#define RADIO_TXPOWER_TXPOWER_Pos4dBm (0x04UL) /*!< +4dBm. */ +#define RADIO_TXPOWER_TXPOWER_0dBm (0x00UL) /*!< 0dBm. */ +#define RADIO_TXPOWER_TXPOWER_Neg4dBm (0xFCUL) /*!< -4dBm. */ +#define RADIO_TXPOWER_TXPOWER_Neg8dBm (0xF8UL) /*!< -8dBm. */ +#define RADIO_TXPOWER_TXPOWER_Neg12dBm (0xF4UL) /*!< -12dBm. */ +#define RADIO_TXPOWER_TXPOWER_Neg16dBm (0xF0UL) /*!< -16dBm. */ +#define RADIO_TXPOWER_TXPOWER_Neg20dBm (0xECUL) /*!< -20dBm. */ +#define RADIO_TXPOWER_TXPOWER_Neg30dBm (0xD8UL) /*!< -30dBm. */ + +/* Register: RADIO_MODE */ +/* Description: Data rate and modulation. */ + +/* Bits 1..0 : Radio data rate and modulation setting. Decision point: TXEN or RXEN task. */ +#define RADIO_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */ +#define RADIO_MODE_MODE_Msk (0x3UL << RADIO_MODE_MODE_Pos) /*!< Bit mask of MODE field. */ +#define RADIO_MODE_MODE_Nrf_1Mbit (0x00UL) /*!< 1Mbit/s Nordic propietary radio mode. */ +#define RADIO_MODE_MODE_Nrf_2Mbit (0x01UL) /*!< 2Mbit/s Nordic propietary radio mode. */ +#define RADIO_MODE_MODE_Nrf_250Kbit (0x02UL) /*!< 250kbit/s Nordic propietary radio mode. */ +#define RADIO_MODE_MODE_Ble_1Mbit (0x03UL) /*!< 1Mbit/s Bluetooth Low Energy */ + +/* Register: RADIO_PCNF0 */ +/* Description: Packet configuration 0. */ + +/* Bits 19..16 : Length of S1 field in number of bits. Decision point: START task. */ +#define RADIO_PCNF0_S1LEN_Pos (16UL) /*!< Position of S1LEN field. */ +#define RADIO_PCNF0_S1LEN_Msk (0xFUL << RADIO_PCNF0_S1LEN_Pos) /*!< Bit mask of S1LEN field. */ + +/* Bit 8 : Length of S0 field in number of bytes. Decision point: START task. */ +#define RADIO_PCNF0_S0LEN_Pos (8UL) /*!< Position of S0LEN field. */ +#define RADIO_PCNF0_S0LEN_Msk (0x1UL << RADIO_PCNF0_S0LEN_Pos) /*!< Bit mask of S0LEN field. */ + +/* Bits 3..0 : Length of length field in number of bits. Decision point: START task. */ +#define RADIO_PCNF0_LFLEN_Pos (0UL) /*!< Position of LFLEN field. */ +#define RADIO_PCNF0_LFLEN_Msk (0xFUL << RADIO_PCNF0_LFLEN_Pos) /*!< Bit mask of LFLEN field. */ + +/* Register: RADIO_PCNF1 */ +/* Description: Packet configuration 1. */ + +/* Bit 25 : Packet whitening enable. */ +#define RADIO_PCNF1_WHITEEN_Pos (25UL) /*!< Position of WHITEEN field. */ +#define RADIO_PCNF1_WHITEEN_Msk (0x1UL << RADIO_PCNF1_WHITEEN_Pos) /*!< Bit mask of WHITEEN field. */ +#define RADIO_PCNF1_WHITEEN_Disabled (0UL) /*!< Whitening disabled. */ +#define RADIO_PCNF1_WHITEEN_Enabled (1UL) /*!< Whitening enabled. */ + +/* Bit 24 : On air endianness of packet length field. Decision point: START task. */ +#define RADIO_PCNF1_ENDIAN_Pos (24UL) /*!< Position of ENDIAN field. */ +#define RADIO_PCNF1_ENDIAN_Msk (0x1UL << RADIO_PCNF1_ENDIAN_Pos) /*!< Bit mask of ENDIAN field. */ +#define RADIO_PCNF1_ENDIAN_Little (0UL) /*!< Least significant bit on air first */ +#define RADIO_PCNF1_ENDIAN_Big (1UL) /*!< Most significant bit on air first */ + +/* Bits 18..16 : Base address length in number of bytes. Decision point: START task. */ +#define RADIO_PCNF1_BALEN_Pos (16UL) /*!< Position of BALEN field. */ +#define RADIO_PCNF1_BALEN_Msk (0x7UL << RADIO_PCNF1_BALEN_Pos) /*!< Bit mask of BALEN field. */ + +/* Bits 15..8 : Static length in number of bytes. Decision point: START task. */ +#define RADIO_PCNF1_STATLEN_Pos (8UL) /*!< Position of STATLEN field. */ +#define RADIO_PCNF1_STATLEN_Msk (0xFFUL << RADIO_PCNF1_STATLEN_Pos) /*!< Bit mask of STATLEN field. */ + +/* Bits 7..0 : Maximum length of packet payload in number of bytes. */ +#define RADIO_PCNF1_MAXLEN_Pos (0UL) /*!< Position of MAXLEN field. */ +#define RADIO_PCNF1_MAXLEN_Msk (0xFFUL << RADIO_PCNF1_MAXLEN_Pos) /*!< Bit mask of MAXLEN field. */ + +/* Register: RADIO_PREFIX0 */ +/* Description: Prefixes bytes for logical addresses 0 to 3. */ + +/* Bits 31..24 : Address prefix 3. Decision point: START task. */ +#define RADIO_PREFIX0_AP3_Pos (24UL) /*!< Position of AP3 field. */ +#define RADIO_PREFIX0_AP3_Msk (0xFFUL << RADIO_PREFIX0_AP3_Pos) /*!< Bit mask of AP3 field. */ + +/* Bits 23..16 : Address prefix 2. Decision point: START task. */ +#define RADIO_PREFIX0_AP2_Pos (16UL) /*!< Position of AP2 field. */ +#define RADIO_PREFIX0_AP2_Msk (0xFFUL << RADIO_PREFIX0_AP2_Pos) /*!< Bit mask of AP2 field. */ + +/* Bits 15..8 : Address prefix 1. Decision point: START task. */ +#define RADIO_PREFIX0_AP1_Pos (8UL) /*!< Position of AP1 field. */ +#define RADIO_PREFIX0_AP1_Msk (0xFFUL << RADIO_PREFIX0_AP1_Pos) /*!< Bit mask of AP1 field. */ + +/* Bits 7..0 : Address prefix 0. Decision point: START task. */ +#define RADIO_PREFIX0_AP0_Pos (0UL) /*!< Position of AP0 field. */ +#define RADIO_PREFIX0_AP0_Msk (0xFFUL << RADIO_PREFIX0_AP0_Pos) /*!< Bit mask of AP0 field. */ + +/* Register: RADIO_PREFIX1 */ +/* Description: Prefixes bytes for logical addresses 4 to 7. */ + +/* Bits 31..24 : Address prefix 7. Decision point: START task. */ +#define RADIO_PREFIX1_AP7_Pos (24UL) /*!< Position of AP7 field. */ +#define RADIO_PREFIX1_AP7_Msk (0xFFUL << RADIO_PREFIX1_AP7_Pos) /*!< Bit mask of AP7 field. */ + +/* Bits 23..16 : Address prefix 6. Decision point: START task. */ +#define RADIO_PREFIX1_AP6_Pos (16UL) /*!< Position of AP6 field. */ +#define RADIO_PREFIX1_AP6_Msk (0xFFUL << RADIO_PREFIX1_AP6_Pos) /*!< Bit mask of AP6 field. */ + +/* Bits 15..8 : Address prefix 5. Decision point: START task. */ +#define RADIO_PREFIX1_AP5_Pos (8UL) /*!< Position of AP5 field. */ +#define RADIO_PREFIX1_AP5_Msk (0xFFUL << RADIO_PREFIX1_AP5_Pos) /*!< Bit mask of AP5 field. */ + +/* Bits 7..0 : Address prefix 4. Decision point: START task. */ +#define RADIO_PREFIX1_AP4_Pos (0UL) /*!< Position of AP4 field. */ +#define RADIO_PREFIX1_AP4_Msk (0xFFUL << RADIO_PREFIX1_AP4_Pos) /*!< Bit mask of AP4 field. */ + +/* Register: RADIO_TXADDRESS */ +/* Description: Transmit address select. */ + +/* Bits 2..0 : Logical address to be used when transmitting a packet. Decision point: START task. */ +#define RADIO_TXADDRESS_TXADDRESS_Pos (0UL) /*!< Position of TXADDRESS field. */ +#define RADIO_TXADDRESS_TXADDRESS_Msk (0x7UL << RADIO_TXADDRESS_TXADDRESS_Pos) /*!< Bit mask of TXADDRESS field. */ + +/* Register: RADIO_RXADDRESSES */ +/* Description: Receive address select. */ + +/* Bit 7 : Enable reception on logical address 7. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR7_Pos (7UL) /*!< Position of ADDR7 field. */ +#define RADIO_RXADDRESSES_ADDR7_Msk (0x1UL << RADIO_RXADDRESSES_ADDR7_Pos) /*!< Bit mask of ADDR7 field. */ +#define RADIO_RXADDRESSES_ADDR7_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR7_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 6 : Enable reception on logical address 6. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR6_Pos (6UL) /*!< Position of ADDR6 field. */ +#define RADIO_RXADDRESSES_ADDR6_Msk (0x1UL << RADIO_RXADDRESSES_ADDR6_Pos) /*!< Bit mask of ADDR6 field. */ +#define RADIO_RXADDRESSES_ADDR6_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR6_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 5 : Enable reception on logical address 5. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR5_Pos (5UL) /*!< Position of ADDR5 field. */ +#define RADIO_RXADDRESSES_ADDR5_Msk (0x1UL << RADIO_RXADDRESSES_ADDR5_Pos) /*!< Bit mask of ADDR5 field. */ +#define RADIO_RXADDRESSES_ADDR5_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR5_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 4 : Enable reception on logical address 4. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR4_Pos (4UL) /*!< Position of ADDR4 field. */ +#define RADIO_RXADDRESSES_ADDR4_Msk (0x1UL << RADIO_RXADDRESSES_ADDR4_Pos) /*!< Bit mask of ADDR4 field. */ +#define RADIO_RXADDRESSES_ADDR4_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR4_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 3 : Enable reception on logical address 3. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR3_Pos (3UL) /*!< Position of ADDR3 field. */ +#define RADIO_RXADDRESSES_ADDR3_Msk (0x1UL << RADIO_RXADDRESSES_ADDR3_Pos) /*!< Bit mask of ADDR3 field. */ +#define RADIO_RXADDRESSES_ADDR3_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR3_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 2 : Enable reception on logical address 2. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR2_Pos (2UL) /*!< Position of ADDR2 field. */ +#define RADIO_RXADDRESSES_ADDR2_Msk (0x1UL << RADIO_RXADDRESSES_ADDR2_Pos) /*!< Bit mask of ADDR2 field. */ +#define RADIO_RXADDRESSES_ADDR2_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR2_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 1 : Enable reception on logical address 1. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR1_Pos (1UL) /*!< Position of ADDR1 field. */ +#define RADIO_RXADDRESSES_ADDR1_Msk (0x1UL << RADIO_RXADDRESSES_ADDR1_Pos) /*!< Bit mask of ADDR1 field. */ +#define RADIO_RXADDRESSES_ADDR1_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR1_Enabled (1UL) /*!< Reception enabled. */ + +/* Bit 0 : Enable reception on logical address 0. Decision point: START task. */ +#define RADIO_RXADDRESSES_ADDR0_Pos (0UL) /*!< Position of ADDR0 field. */ +#define RADIO_RXADDRESSES_ADDR0_Msk (0x1UL << RADIO_RXADDRESSES_ADDR0_Pos) /*!< Bit mask of ADDR0 field. */ +#define RADIO_RXADDRESSES_ADDR0_Disabled (0UL) /*!< Reception disabled. */ +#define RADIO_RXADDRESSES_ADDR0_Enabled (1UL) /*!< Reception enabled. */ + +/* Register: RADIO_CRCCNF */ +/* Description: CRC configuration. */ + +/* Bit 8 : Leave packet address field out of the CRC calculation. Decision point: START task. */ +#define RADIO_CRCCNF_SKIP_ADDR_Pos (8UL) /*!< Position of SKIP_ADDR field. */ +#define RADIO_CRCCNF_SKIP_ADDR_Msk (0x1UL << RADIO_CRCCNF_SKIP_ADDR_Pos) /*!< Bit mask of SKIP_ADDR field. */ +#define RADIO_CRCCNF_SKIP_ADDR_Include (0UL) /*!< Include packet address in CRC calculation. */ +#define RADIO_CRCCNF_SKIP_ADDR_Skip (1UL) /*!< Packet address is skipped in CRC calculation. The CRC calculation will start at the first byte after the address. */ + +/* Bits 1..0 : CRC length. Decision point: START task. */ +#define RADIO_CRCCNF_LEN_Pos (0UL) /*!< Position of LEN field. */ +#define RADIO_CRCCNF_LEN_Msk (0x3UL << RADIO_CRCCNF_LEN_Pos) /*!< Bit mask of LEN field. */ +#define RADIO_CRCCNF_LEN_Disabled (0UL) /*!< CRC calculation disabled. */ +#define RADIO_CRCCNF_LEN_One (1UL) /*!< One byte long CRC. */ +#define RADIO_CRCCNF_LEN_Two (2UL) /*!< Two bytes long CRC. */ +#define RADIO_CRCCNF_LEN_Three (3UL) /*!< Three bytes long CRC. */ + +/* Register: RADIO_CRCPOLY */ +/* Description: CRC polynomial. */ + +/* Bits 23..1 : CRC polynomial. Decision point: START task. */ +#define RADIO_CRCPOLY_CRCPOLY_Pos (1UL) /*!< Position of CRCPOLY field. */ +#define RADIO_CRCPOLY_CRCPOLY_Msk (0x7FFFFFUL << RADIO_CRCPOLY_CRCPOLY_Pos) /*!< Bit mask of CRCPOLY field. */ + +/* Register: RADIO_CRCINIT */ +/* Description: CRC initial value. */ + +/* Bits 23..0 : Initial value for CRC calculation. Decision point: START task. */ +#define RADIO_CRCINIT_CRCINIT_Pos (0UL) /*!< Position of CRCINIT field. */ +#define RADIO_CRCINIT_CRCINIT_Msk (0xFFFFFFUL << RADIO_CRCINIT_CRCINIT_Pos) /*!< Bit mask of CRCINIT field. */ + +/* Register: RADIO_TEST */ +/* Description: Test features enable register. */ + +/* Bit 1 : PLL lock. Decision point: TXEN or RXEN task. */ +#define RADIO_TEST_PLL_LOCK_Pos (1UL) /*!< Position of PLL_LOCK field. */ +#define RADIO_TEST_PLL_LOCK_Msk (0x1UL << RADIO_TEST_PLL_LOCK_Pos) /*!< Bit mask of PLL_LOCK field. */ +#define RADIO_TEST_PLL_LOCK_Disabled (0UL) /*!< PLL lock disabled. */ +#define RADIO_TEST_PLL_LOCK_Enabled (1UL) /*!< PLL lock enabled. */ + +/* Bit 0 : Constant carrier. Decision point: TXEN task. */ +#define RADIO_TEST_CONST_CARRIER_Pos (0UL) /*!< Position of CONST_CARRIER field. */ +#define RADIO_TEST_CONST_CARRIER_Msk (0x1UL << RADIO_TEST_CONST_CARRIER_Pos) /*!< Bit mask of CONST_CARRIER field. */ +#define RADIO_TEST_CONST_CARRIER_Disabled (0UL) /*!< Constant carrier disabled. */ +#define RADIO_TEST_CONST_CARRIER_Enabled (1UL) /*!< Constant carrier enabled. */ + +/* Register: RADIO_TIFS */ +/* Description: Inter Frame Spacing in microseconds. */ + +/* Bits 7..0 : Inter frame spacing in microseconds. Decision point: START rask */ +#define RADIO_TIFS_TIFS_Pos (0UL) /*!< Position of TIFS field. */ +#define RADIO_TIFS_TIFS_Msk (0xFFUL << RADIO_TIFS_TIFS_Pos) /*!< Bit mask of TIFS field. */ + +/* Register: RADIO_RSSISAMPLE */ +/* Description: RSSI sample. */ + +/* Bits 6..0 : RSSI sample result. The result is read as a positive value so that ReceivedSignalStrength = -RSSISAMPLE dBm */ +#define RADIO_RSSISAMPLE_RSSISAMPLE_Pos (0UL) /*!< Position of RSSISAMPLE field. */ +#define RADIO_RSSISAMPLE_RSSISAMPLE_Msk (0x7FUL << RADIO_RSSISAMPLE_RSSISAMPLE_Pos) /*!< Bit mask of RSSISAMPLE field. */ + +/* Register: RADIO_STATE */ +/* Description: Current radio state. */ + +/* Bits 3..0 : Current radio state. */ +#define RADIO_STATE_STATE_Pos (0UL) /*!< Position of STATE field. */ +#define RADIO_STATE_STATE_Msk (0xFUL << RADIO_STATE_STATE_Pos) /*!< Bit mask of STATE field. */ +#define RADIO_STATE_STATE_Disabled (0x00UL) /*!< Radio is in the Disabled state. */ +#define RADIO_STATE_STATE_RxRu (0x01UL) /*!< Radio is in the Rx Ramp Up state. */ +#define RADIO_STATE_STATE_RxIdle (0x02UL) /*!< Radio is in the Rx Idle state. */ +#define RADIO_STATE_STATE_Rx (0x03UL) /*!< Radio is in the Rx state. */ +#define RADIO_STATE_STATE_RxDisable (0x04UL) /*!< Radio is in the Rx Disable state. */ +#define RADIO_STATE_STATE_TxRu (0x09UL) /*!< Radio is in the Tx Ramp Up state. */ +#define RADIO_STATE_STATE_TxIdle (0x0AUL) /*!< Radio is in the Tx Idle state. */ +#define RADIO_STATE_STATE_Tx (0x0BUL) /*!< Radio is in the Tx state. */ +#define RADIO_STATE_STATE_TxDisable (0x0CUL) /*!< Radio is in the Tx Disable state. */ + +/* Register: RADIO_DATAWHITEIV */ +/* Description: Data whitening initial value. */ + +/* Bits 5..0 : Data whitening initial value. Bit 0 corresponds to Position 0 of the LSFR, Bit 1 to position 5... Decision point: TXEN or RXEN task. */ +#define RADIO_DATAWHITEIV_DATAWHITEIV_Pos (0UL) /*!< Position of DATAWHITEIV field. */ +#define RADIO_DATAWHITEIV_DATAWHITEIV_Msk (0x3FUL << RADIO_DATAWHITEIV_DATAWHITEIV_Pos) /*!< Bit mask of DATAWHITEIV field. */ + +/* Register: RADIO_DAP */ +/* Description: Device address prefix. */ + +/* Bits 15..0 : Device address prefix. */ +#define RADIO_DAP_DAP_Pos (0UL) /*!< Position of DAP field. */ +#define RADIO_DAP_DAP_Msk (0xFFFFUL << RADIO_DAP_DAP_Pos) /*!< Bit mask of DAP field. */ + +/* Register: RADIO_DACNF */ +/* Description: Device address match configuration. */ + +/* Bit 15 : TxAdd for device address 7. */ +#define RADIO_DACNF_TXADD7_Pos (15UL) /*!< Position of TXADD7 field. */ +#define RADIO_DACNF_TXADD7_Msk (0x1UL << RADIO_DACNF_TXADD7_Pos) /*!< Bit mask of TXADD7 field. */ + +/* Bit 14 : TxAdd for device address 6. */ +#define RADIO_DACNF_TXADD6_Pos (14UL) /*!< Position of TXADD6 field. */ +#define RADIO_DACNF_TXADD6_Msk (0x1UL << RADIO_DACNF_TXADD6_Pos) /*!< Bit mask of TXADD6 field. */ + +/* Bit 13 : TxAdd for device address 5. */ +#define RADIO_DACNF_TXADD5_Pos (13UL) /*!< Position of TXADD5 field. */ +#define RADIO_DACNF_TXADD5_Msk (0x1UL << RADIO_DACNF_TXADD5_Pos) /*!< Bit mask of TXADD5 field. */ + +/* Bit 12 : TxAdd for device address 4. */ +#define RADIO_DACNF_TXADD4_Pos (12UL) /*!< Position of TXADD4 field. */ +#define RADIO_DACNF_TXADD4_Msk (0x1UL << RADIO_DACNF_TXADD4_Pos) /*!< Bit mask of TXADD4 field. */ + +/* Bit 11 : TxAdd for device address 3. */ +#define RADIO_DACNF_TXADD3_Pos (11UL) /*!< Position of TXADD3 field. */ +#define RADIO_DACNF_TXADD3_Msk (0x1UL << RADIO_DACNF_TXADD3_Pos) /*!< Bit mask of TXADD3 field. */ + +/* Bit 10 : TxAdd for device address 2. */ +#define RADIO_DACNF_TXADD2_Pos (10UL) /*!< Position of TXADD2 field. */ +#define RADIO_DACNF_TXADD2_Msk (0x1UL << RADIO_DACNF_TXADD2_Pos) /*!< Bit mask of TXADD2 field. */ + +/* Bit 9 : TxAdd for device address 1. */ +#define RADIO_DACNF_TXADD1_Pos (9UL) /*!< Position of TXADD1 field. */ +#define RADIO_DACNF_TXADD1_Msk (0x1UL << RADIO_DACNF_TXADD1_Pos) /*!< Bit mask of TXADD1 field. */ + +/* Bit 8 : TxAdd for device address 0. */ +#define RADIO_DACNF_TXADD0_Pos (8UL) /*!< Position of TXADD0 field. */ +#define RADIO_DACNF_TXADD0_Msk (0x1UL << RADIO_DACNF_TXADD0_Pos) /*!< Bit mask of TXADD0 field. */ + +/* Bit 7 : Enable or disable device address matching using device address 7. */ +#define RADIO_DACNF_ENA7_Pos (7UL) /*!< Position of ENA7 field. */ +#define RADIO_DACNF_ENA7_Msk (0x1UL << RADIO_DACNF_ENA7_Pos) /*!< Bit mask of ENA7 field. */ +#define RADIO_DACNF_ENA7_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA7_Enabled (1UL) /*!< Enabled. */ + +/* Bit 6 : Enable or disable device address matching using device address 6. */ +#define RADIO_DACNF_ENA6_Pos (6UL) /*!< Position of ENA6 field. */ +#define RADIO_DACNF_ENA6_Msk (0x1UL << RADIO_DACNF_ENA6_Pos) /*!< Bit mask of ENA6 field. */ +#define RADIO_DACNF_ENA6_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA6_Enabled (1UL) /*!< Enabled. */ + +/* Bit 5 : Enable or disable device address matching using device address 5. */ +#define RADIO_DACNF_ENA5_Pos (5UL) /*!< Position of ENA5 field. */ +#define RADIO_DACNF_ENA5_Msk (0x1UL << RADIO_DACNF_ENA5_Pos) /*!< Bit mask of ENA5 field. */ +#define RADIO_DACNF_ENA5_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA5_Enabled (1UL) /*!< Enabled. */ + +/* Bit 4 : Enable or disable device address matching using device address 4. */ +#define RADIO_DACNF_ENA4_Pos (4UL) /*!< Position of ENA4 field. */ +#define RADIO_DACNF_ENA4_Msk (0x1UL << RADIO_DACNF_ENA4_Pos) /*!< Bit mask of ENA4 field. */ +#define RADIO_DACNF_ENA4_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA4_Enabled (1UL) /*!< Enabled. */ + +/* Bit 3 : Enable or disable device address matching using device address 3. */ +#define RADIO_DACNF_ENA3_Pos (3UL) /*!< Position of ENA3 field. */ +#define RADIO_DACNF_ENA3_Msk (0x1UL << RADIO_DACNF_ENA3_Pos) /*!< Bit mask of ENA3 field. */ +#define RADIO_DACNF_ENA3_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA3_Enabled (1UL) /*!< Enabled. */ + +/* Bit 2 : Enable or disable device address matching using device address 2. */ +#define RADIO_DACNF_ENA2_Pos (2UL) /*!< Position of ENA2 field. */ +#define RADIO_DACNF_ENA2_Msk (0x1UL << RADIO_DACNF_ENA2_Pos) /*!< Bit mask of ENA2 field. */ +#define RADIO_DACNF_ENA2_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA2_Enabled (1UL) /*!< Enabled. */ + +/* Bit 1 : Enable or disable device address matching using device address 1. */ +#define RADIO_DACNF_ENA1_Pos (1UL) /*!< Position of ENA1 field. */ +#define RADIO_DACNF_ENA1_Msk (0x1UL << RADIO_DACNF_ENA1_Pos) /*!< Bit mask of ENA1 field. */ +#define RADIO_DACNF_ENA1_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA1_Enabled (1UL) /*!< Enabled. */ + +/* Bit 0 : Enable or disable device address matching using device address 0. */ +#define RADIO_DACNF_ENA0_Pos (0UL) /*!< Position of ENA0 field. */ +#define RADIO_DACNF_ENA0_Msk (0x1UL << RADIO_DACNF_ENA0_Pos) /*!< Bit mask of ENA0 field. */ +#define RADIO_DACNF_ENA0_Disabled (0UL) /*!< Disabled. */ +#define RADIO_DACNF_ENA0_Enabled (1UL) /*!< Enabled. */ + +/* Register: RADIO_OVERRIDE0 */ +/* Description: Trim value override register 0. */ + +/* Bits 31..0 : Trim value override register 0. */ +#define RADIO_OVERRIDE0_OVERRIDE0_Pos (0UL) /*!< Position of OVERRIDE0 field. */ +#define RADIO_OVERRIDE0_OVERRIDE0_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE0_OVERRIDE0_Pos) /*!< Bit mask of OVERRIDE0 field. */ + +/* Register: RADIO_OVERRIDE1 */ +/* Description: Trim value override register 1. */ + +/* Bits 31..0 : Trim value override register 1. */ +#define RADIO_OVERRIDE1_OVERRIDE1_Pos (0UL) /*!< Position of OVERRIDE1 field. */ +#define RADIO_OVERRIDE1_OVERRIDE1_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE1_OVERRIDE1_Pos) /*!< Bit mask of OVERRIDE1 field. */ + +/* Register: RADIO_OVERRIDE2 */ +/* Description: Trim value override register 2. */ + +/* Bits 31..0 : Trim value override register 2. */ +#define RADIO_OVERRIDE2_OVERRIDE2_Pos (0UL) /*!< Position of OVERRIDE2 field. */ +#define RADIO_OVERRIDE2_OVERRIDE2_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE2_OVERRIDE2_Pos) /*!< Bit mask of OVERRIDE2 field. */ + +/* Register: RADIO_OVERRIDE3 */ +/* Description: Trim value override register 3. */ + +/* Bits 31..0 : Trim value override register 3. */ +#define RADIO_OVERRIDE3_OVERRIDE3_Pos (0UL) /*!< Position of OVERRIDE3 field. */ +#define RADIO_OVERRIDE3_OVERRIDE3_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE3_OVERRIDE3_Pos) /*!< Bit mask of OVERRIDE3 field. */ + +/* Register: RADIO_OVERRIDE4 */ +/* Description: Trim value override register 4. */ + +/* Bit 31 : Enable or disable override of default trim values. */ +#define RADIO_OVERRIDE4_ENABLE_Pos (31UL) /*!< Position of ENABLE field. */ +#define RADIO_OVERRIDE4_ENABLE_Msk (0x1UL << RADIO_OVERRIDE4_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define RADIO_OVERRIDE4_ENABLE_Disabled (0UL) /*!< Override trim values disabled. */ +#define RADIO_OVERRIDE4_ENABLE_Enabled (1UL) /*!< Override trim values enabled. */ + +/* Bits 27..0 : Trim value override register 4. */ +#define RADIO_OVERRIDE4_OVERRIDE4_Pos (0UL) /*!< Position of OVERRIDE4 field. */ +#define RADIO_OVERRIDE4_OVERRIDE4_Msk (0xFFFFFFFUL << RADIO_OVERRIDE4_OVERRIDE4_Pos) /*!< Bit mask of OVERRIDE4 field. */ + +/* Register: RADIO_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define RADIO_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define RADIO_POWER_POWER_Msk (0x1UL << RADIO_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define RADIO_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define RADIO_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: RNG */ +/* Description: Random Number Generator. */ + +/* Register: RNG_SHORTS */ +/* Description: Shortcut for the RNG. */ + +/* Bit 0 : Short-cut between VALRDY event and STOP task. */ +#define RNG_SHORTS_VALRDY_STOP_Pos (0UL) /*!< Position of VALRDY_STOP field. */ +#define RNG_SHORTS_VALRDY_STOP_Msk (0x1UL << RNG_SHORTS_VALRDY_STOP_Pos) /*!< Bit mask of VALRDY_STOP field. */ +#define RNG_SHORTS_VALRDY_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define RNG_SHORTS_VALRDY_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: RNG_INTENSET */ +/* Description: Interrupt enable set register */ + +/* Bit 0 : Enable interrupt on VALRDY event. */ +#define RNG_INTENSET_VALRDY_Pos (0UL) /*!< Position of VALRDY field. */ +#define RNG_INTENSET_VALRDY_Msk (0x1UL << RNG_INTENSET_VALRDY_Pos) /*!< Bit mask of VALRDY field. */ +#define RNG_INTENSET_VALRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define RNG_INTENSET_VALRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define RNG_INTENSET_VALRDY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: RNG_INTENCLR */ +/* Description: Interrupt enable clear register */ + +/* Bit 0 : Disable interrupt on VALRDY event. */ +#define RNG_INTENCLR_VALRDY_Pos (0UL) /*!< Position of VALRDY field. */ +#define RNG_INTENCLR_VALRDY_Msk (0x1UL << RNG_INTENCLR_VALRDY_Pos) /*!< Bit mask of VALRDY field. */ +#define RNG_INTENCLR_VALRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define RNG_INTENCLR_VALRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define RNG_INTENCLR_VALRDY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: RNG_CONFIG */ +/* Description: Configuration register. */ + +/* Bit 0 : Digital error correction enable. */ +#define RNG_CONFIG_DERCEN_Pos (0UL) /*!< Position of DERCEN field. */ +#define RNG_CONFIG_DERCEN_Msk (0x1UL << RNG_CONFIG_DERCEN_Pos) /*!< Bit mask of DERCEN field. */ +#define RNG_CONFIG_DERCEN_Disabled (0UL) /*!< Digital error correction disabled. */ +#define RNG_CONFIG_DERCEN_Enabled (1UL) /*!< Digital error correction enabled. */ + +/* Register: RNG_VALUE */ +/* Description: RNG random number. */ + +/* Bits 7..0 : Generated random number. */ +#define RNG_VALUE_VALUE_Pos (0UL) /*!< Position of VALUE field. */ +#define RNG_VALUE_VALUE_Msk (0xFFUL << RNG_VALUE_VALUE_Pos) /*!< Bit mask of VALUE field. */ + +/* Register: RNG_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define RNG_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define RNG_POWER_POWER_Msk (0x1UL << RNG_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define RNG_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define RNG_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: RTC */ +/* Description: Real time counter 0. */ + +/* Register: RTC_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 19 : Enable interrupt on COMPARE[3] event. */ +#define RTC_INTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define RTC_INTENSET_COMPARE3_Msk (0x1UL << RTC_INTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define RTC_INTENSET_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENSET_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENSET_COMPARE3_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 18 : Enable interrupt on COMPARE[2] event. */ +#define RTC_INTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define RTC_INTENSET_COMPARE2_Msk (0x1UL << RTC_INTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define RTC_INTENSET_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENSET_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENSET_COMPARE2_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 17 : Enable interrupt on COMPARE[1] event. */ +#define RTC_INTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define RTC_INTENSET_COMPARE1_Msk (0x1UL << RTC_INTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define RTC_INTENSET_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENSET_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENSET_COMPARE1_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 16 : Enable interrupt on COMPARE[0] event. */ +#define RTC_INTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define RTC_INTENSET_COMPARE0_Msk (0x1UL << RTC_INTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define RTC_INTENSET_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENSET_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENSET_COMPARE0_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on OVRFLW event. */ +#define RTC_INTENSET_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ +#define RTC_INTENSET_OVRFLW_Msk (0x1UL << RTC_INTENSET_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ +#define RTC_INTENSET_OVRFLW_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENSET_OVRFLW_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENSET_OVRFLW_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on TICK event. */ +#define RTC_INTENSET_TICK_Pos (0UL) /*!< Position of TICK field. */ +#define RTC_INTENSET_TICK_Msk (0x1UL << RTC_INTENSET_TICK_Pos) /*!< Bit mask of TICK field. */ +#define RTC_INTENSET_TICK_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENSET_TICK_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENSET_TICK_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: RTC_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 19 : Disable interrupt on COMPARE[3] event. */ +#define RTC_INTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define RTC_INTENCLR_COMPARE3_Msk (0x1UL << RTC_INTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define RTC_INTENCLR_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENCLR_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENCLR_COMPARE3_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 18 : Disable interrupt on COMPARE[2] event. */ +#define RTC_INTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define RTC_INTENCLR_COMPARE2_Msk (0x1UL << RTC_INTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define RTC_INTENCLR_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENCLR_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENCLR_COMPARE2_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 17 : Disable interrupt on COMPARE[1] event. */ +#define RTC_INTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define RTC_INTENCLR_COMPARE1_Msk (0x1UL << RTC_INTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define RTC_INTENCLR_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENCLR_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENCLR_COMPARE1_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 16 : Disable interrupt on COMPARE[0] event. */ +#define RTC_INTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define RTC_INTENCLR_COMPARE0_Msk (0x1UL << RTC_INTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define RTC_INTENCLR_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENCLR_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENCLR_COMPARE0_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on OVRFLW event. */ +#define RTC_INTENCLR_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ +#define RTC_INTENCLR_OVRFLW_Msk (0x1UL << RTC_INTENCLR_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ +#define RTC_INTENCLR_OVRFLW_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENCLR_OVRFLW_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENCLR_OVRFLW_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on TICK event. */ +#define RTC_INTENCLR_TICK_Pos (0UL) /*!< Position of TICK field. */ +#define RTC_INTENCLR_TICK_Msk (0x1UL << RTC_INTENCLR_TICK_Pos) /*!< Bit mask of TICK field. */ +#define RTC_INTENCLR_TICK_Disabled (0UL) /*!< Interrupt disabled. */ +#define RTC_INTENCLR_TICK_Enabled (1UL) /*!< Interrupt enabled. */ +#define RTC_INTENCLR_TICK_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: RTC_EVTEN */ +/* Description: Configures event enable routing to PPI for each RTC event. */ + +/* Bit 19 : COMPARE[3] event enable. */ +#define RTC_EVTEN_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define RTC_EVTEN_COMPARE3_Msk (0x1UL << RTC_EVTEN_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define RTC_EVTEN_COMPARE3_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTEN_COMPARE3_Enabled (1UL) /*!< Event enabled. */ + +/* Bit 18 : COMPARE[2] event enable. */ +#define RTC_EVTEN_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define RTC_EVTEN_COMPARE2_Msk (0x1UL << RTC_EVTEN_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define RTC_EVTEN_COMPARE2_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTEN_COMPARE2_Enabled (1UL) /*!< Event enabled. */ + +/* Bit 17 : COMPARE[1] event enable. */ +#define RTC_EVTEN_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define RTC_EVTEN_COMPARE1_Msk (0x1UL << RTC_EVTEN_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define RTC_EVTEN_COMPARE1_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTEN_COMPARE1_Enabled (1UL) /*!< Event enabled. */ + +/* Bit 16 : COMPARE[0] event enable. */ +#define RTC_EVTEN_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define RTC_EVTEN_COMPARE0_Msk (0x1UL << RTC_EVTEN_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define RTC_EVTEN_COMPARE0_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTEN_COMPARE0_Enabled (1UL) /*!< Event enabled. */ + +/* Bit 1 : OVRFLW event enable. */ +#define RTC_EVTEN_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ +#define RTC_EVTEN_OVRFLW_Msk (0x1UL << RTC_EVTEN_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ +#define RTC_EVTEN_OVRFLW_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTEN_OVRFLW_Enabled (1UL) /*!< Event enabled. */ + +/* Bit 0 : TICK event enable. */ +#define RTC_EVTEN_TICK_Pos (0UL) /*!< Position of TICK field. */ +#define RTC_EVTEN_TICK_Msk (0x1UL << RTC_EVTEN_TICK_Pos) /*!< Bit mask of TICK field. */ +#define RTC_EVTEN_TICK_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTEN_TICK_Enabled (1UL) /*!< Event enabled. */ + +/* Register: RTC_EVTENSET */ +/* Description: Enable events routing to PPI. The reading of this register gives the value of EVTEN. */ + +/* Bit 19 : Enable routing to PPI of COMPARE[3] event. */ +#define RTC_EVTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define RTC_EVTENSET_COMPARE3_Msk (0x1UL << RTC_EVTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define RTC_EVTENSET_COMPARE3_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENSET_COMPARE3_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENSET_COMPARE3_Set (1UL) /*!< Enable event on write. */ + +/* Bit 18 : Enable routing to PPI of COMPARE[2] event. */ +#define RTC_EVTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define RTC_EVTENSET_COMPARE2_Msk (0x1UL << RTC_EVTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define RTC_EVTENSET_COMPARE2_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENSET_COMPARE2_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENSET_COMPARE2_Set (1UL) /*!< Enable event on write. */ + +/* Bit 17 : Enable routing to PPI of COMPARE[1] event. */ +#define RTC_EVTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define RTC_EVTENSET_COMPARE1_Msk (0x1UL << RTC_EVTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define RTC_EVTENSET_COMPARE1_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENSET_COMPARE1_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENSET_COMPARE1_Set (1UL) /*!< Enable event on write. */ + +/* Bit 16 : Enable routing to PPI of COMPARE[0] event. */ +#define RTC_EVTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define RTC_EVTENSET_COMPARE0_Msk (0x1UL << RTC_EVTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define RTC_EVTENSET_COMPARE0_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENSET_COMPARE0_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENSET_COMPARE0_Set (1UL) /*!< Enable event on write. */ + +/* Bit 1 : Enable routing to PPI of OVRFLW event. */ +#define RTC_EVTENSET_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ +#define RTC_EVTENSET_OVRFLW_Msk (0x1UL << RTC_EVTENSET_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ +#define RTC_EVTENSET_OVRFLW_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENSET_OVRFLW_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENSET_OVRFLW_Set (1UL) /*!< Enable event on write. */ + +/* Bit 0 : Enable routing to PPI of TICK event. */ +#define RTC_EVTENSET_TICK_Pos (0UL) /*!< Position of TICK field. */ +#define RTC_EVTENSET_TICK_Msk (0x1UL << RTC_EVTENSET_TICK_Pos) /*!< Bit mask of TICK field. */ +#define RTC_EVTENSET_TICK_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENSET_TICK_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENSET_TICK_Set (1UL) /*!< Enable event on write. */ + +/* Register: RTC_EVTENCLR */ +/* Description: Disable events routing to PPI. The reading of this register gives the value of EVTEN. */ + +/* Bit 19 : Disable routing to PPI of COMPARE[3] event. */ +#define RTC_EVTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define RTC_EVTENCLR_COMPARE3_Msk (0x1UL << RTC_EVTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define RTC_EVTENCLR_COMPARE3_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENCLR_COMPARE3_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENCLR_COMPARE3_Clear (1UL) /*!< Disable event on write. */ + +/* Bit 18 : Disable routing to PPI of COMPARE[2] event. */ +#define RTC_EVTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define RTC_EVTENCLR_COMPARE2_Msk (0x1UL << RTC_EVTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define RTC_EVTENCLR_COMPARE2_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENCLR_COMPARE2_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENCLR_COMPARE2_Clear (1UL) /*!< Disable event on write. */ + +/* Bit 17 : Disable routing to PPI of COMPARE[1] event. */ +#define RTC_EVTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define RTC_EVTENCLR_COMPARE1_Msk (0x1UL << RTC_EVTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define RTC_EVTENCLR_COMPARE1_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENCLR_COMPARE1_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENCLR_COMPARE1_Clear (1UL) /*!< Disable event on write. */ + +/* Bit 16 : Disable routing to PPI of COMPARE[0] event. */ +#define RTC_EVTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define RTC_EVTENCLR_COMPARE0_Msk (0x1UL << RTC_EVTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define RTC_EVTENCLR_COMPARE0_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENCLR_COMPARE0_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENCLR_COMPARE0_Clear (1UL) /*!< Disable event on write. */ + +/* Bit 1 : Disable routing to PPI of OVRFLW event. */ +#define RTC_EVTENCLR_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */ +#define RTC_EVTENCLR_OVRFLW_Msk (0x1UL << RTC_EVTENCLR_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */ +#define RTC_EVTENCLR_OVRFLW_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENCLR_OVRFLW_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENCLR_OVRFLW_Clear (1UL) /*!< Disable event on write. */ + +/* Bit 0 : Disable routing to PPI of TICK event. */ +#define RTC_EVTENCLR_TICK_Pos (0UL) /*!< Position of TICK field. */ +#define RTC_EVTENCLR_TICK_Msk (0x1UL << RTC_EVTENCLR_TICK_Pos) /*!< Bit mask of TICK field. */ +#define RTC_EVTENCLR_TICK_Disabled (0UL) /*!< Event disabled. */ +#define RTC_EVTENCLR_TICK_Enabled (1UL) /*!< Event enabled. */ +#define RTC_EVTENCLR_TICK_Clear (1UL) /*!< Disable event on write. */ + +/* Register: RTC_COUNTER */ +/* Description: Current COUNTER value. */ + +/* Bits 23..0 : Counter value. */ +#define RTC_COUNTER_COUNTER_Pos (0UL) /*!< Position of COUNTER field. */ +#define RTC_COUNTER_COUNTER_Msk (0xFFFFFFUL << RTC_COUNTER_COUNTER_Pos) /*!< Bit mask of COUNTER field. */ + +/* Register: RTC_PRESCALER */ +/* Description: 12-bit prescaler for COUNTER frequency (32768/(PRESCALER+1)). Must be written when RTC is STOPed. */ + +/* Bits 11..0 : RTC PRESCALER value. */ +#define RTC_PRESCALER_PRESCALER_Pos (0UL) /*!< Position of PRESCALER field. */ +#define RTC_PRESCALER_PRESCALER_Msk (0xFFFUL << RTC_PRESCALER_PRESCALER_Pos) /*!< Bit mask of PRESCALER field. */ + +/* Register: RTC_CC */ +/* Description: Capture/compare registers. */ + +/* Bits 23..0 : Compare value. */ +#define RTC_CC_COMPARE_Pos (0UL) /*!< Position of COMPARE field. */ +#define RTC_CC_COMPARE_Msk (0xFFFFFFUL << RTC_CC_COMPARE_Pos) /*!< Bit mask of COMPARE field. */ + +/* Register: RTC_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define RTC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define RTC_POWER_POWER_Msk (0x1UL << RTC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define RTC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define RTC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: SPI */ +/* Description: SPI master 0. */ + +/* Register: SPI_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 2 : Enable interrupt on READY event. */ +#define SPI_INTENSET_READY_Pos (2UL) /*!< Position of READY field. */ +#define SPI_INTENSET_READY_Msk (0x1UL << SPI_INTENSET_READY_Pos) /*!< Bit mask of READY field. */ +#define SPI_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPI_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPI_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: SPI_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 2 : Disable interrupt on READY event. */ +#define SPI_INTENCLR_READY_Pos (2UL) /*!< Position of READY field. */ +#define SPI_INTENCLR_READY_Msk (0x1UL << SPI_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */ +#define SPI_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPI_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPI_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: SPI_ENABLE */ +/* Description: Enable SPI. */ + +/* Bits 2..0 : Enable or disable SPI. */ +#define SPI_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define SPI_ENABLE_ENABLE_Msk (0x7UL << SPI_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define SPI_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPI. */ +#define SPI_ENABLE_ENABLE_Enabled (0x01UL) /*!< Enable SPI. */ + +/* Register: SPI_RXD */ +/* Description: RX data. */ + +/* Bits 7..0 : RX data from last transfer. */ +#define SPI_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */ +#define SPI_RXD_RXD_Msk (0xFFUL << SPI_RXD_RXD_Pos) /*!< Bit mask of RXD field. */ + +/* Register: SPI_TXD */ +/* Description: TX data. */ + +/* Bits 7..0 : TX data for next transfer. */ +#define SPI_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */ +#define SPI_TXD_TXD_Msk (0xFFUL << SPI_TXD_TXD_Pos) /*!< Bit mask of TXD field. */ + +/* Register: SPI_FREQUENCY */ +/* Description: SPI frequency */ + +/* Bits 31..0 : SPI data rate. */ +#define SPI_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ +#define SPI_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << SPI_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ +#define SPI_FREQUENCY_FREQUENCY_K125 (0x02000000UL) /*!< 125kbps. */ +#define SPI_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250kbps. */ +#define SPI_FREQUENCY_FREQUENCY_K500 (0x08000000UL) /*!< 500kbps. */ +#define SPI_FREQUENCY_FREQUENCY_M1 (0x10000000UL) /*!< 1Mbps. */ +#define SPI_FREQUENCY_FREQUENCY_M2 (0x20000000UL) /*!< 2Mbps. */ +#define SPI_FREQUENCY_FREQUENCY_M4 (0x40000000UL) /*!< 4Mbps. */ +#define SPI_FREQUENCY_FREQUENCY_M8 (0x80000000UL) /*!< 8Mbps. */ + +/* Register: SPI_CONFIG */ +/* Description: Configuration register. */ + +/* Bit 2 : Serial clock (SCK) polarity. */ +#define SPI_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */ +#define SPI_CONFIG_CPOL_Msk (0x1UL << SPI_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */ +#define SPI_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */ +#define SPI_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */ + +/* Bit 1 : Serial clock (SCK) phase. */ +#define SPI_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */ +#define SPI_CONFIG_CPHA_Msk (0x1UL << SPI_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */ +#define SPI_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */ +#define SPI_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */ + +/* Bit 0 : Bit order. */ +#define SPI_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */ +#define SPI_CONFIG_ORDER_Msk (0x1UL << SPI_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */ +#define SPI_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */ +#define SPI_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */ + +/* Register: SPI_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define SPI_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define SPI_POWER_POWER_Msk (0x1UL << SPI_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define SPI_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define SPI_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: SPIS */ +/* Description: SPI slave 1. */ + +/* Register: SPIS_SHORTS */ +/* Description: Shortcuts for SPIS. */ + +/* Bit 2 : Shortcut between END event and the ACQUIRE task. */ +#define SPIS_SHORTS_END_ACQUIRE_Pos (2UL) /*!< Position of END_ACQUIRE field. */ +#define SPIS_SHORTS_END_ACQUIRE_Msk (0x1UL << SPIS_SHORTS_END_ACQUIRE_Pos) /*!< Bit mask of END_ACQUIRE field. */ +#define SPIS_SHORTS_END_ACQUIRE_Disabled (0UL) /*!< Shortcut disabled. */ +#define SPIS_SHORTS_END_ACQUIRE_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: SPIS_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 10 : Enable interrupt on ACQUIRED event. */ +#define SPIS_INTENSET_ACQUIRED_Pos (10UL) /*!< Position of ACQUIRED field. */ +#define SPIS_INTENSET_ACQUIRED_Msk (0x1UL << SPIS_INTENSET_ACQUIRED_Pos) /*!< Bit mask of ACQUIRED field. */ +#define SPIS_INTENSET_ACQUIRED_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPIS_INTENSET_ACQUIRED_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPIS_INTENSET_ACQUIRED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on END event. */ +#define SPIS_INTENSET_END_Pos (1UL) /*!< Position of END field. */ +#define SPIS_INTENSET_END_Msk (0x1UL << SPIS_INTENSET_END_Pos) /*!< Bit mask of END field. */ +#define SPIS_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPIS_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPIS_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: SPIS_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 10 : Disable interrupt on ACQUIRED event. */ +#define SPIS_INTENCLR_ACQUIRED_Pos (10UL) /*!< Position of ACQUIRED field. */ +#define SPIS_INTENCLR_ACQUIRED_Msk (0x1UL << SPIS_INTENCLR_ACQUIRED_Pos) /*!< Bit mask of ACQUIRED field. */ +#define SPIS_INTENCLR_ACQUIRED_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPIS_INTENCLR_ACQUIRED_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPIS_INTENCLR_ACQUIRED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on END event. */ +#define SPIS_INTENCLR_END_Pos (1UL) /*!< Position of END field. */ +#define SPIS_INTENCLR_END_Msk (0x1UL << SPIS_INTENCLR_END_Pos) /*!< Bit mask of END field. */ +#define SPIS_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */ +#define SPIS_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */ +#define SPIS_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: SPIS_SEMSTAT */ +/* Description: Semaphore status. */ + +/* Bits 1..0 : Semaphore status. */ +#define SPIS_SEMSTAT_SEMSTAT_Pos (0UL) /*!< Position of SEMSTAT field. */ +#define SPIS_SEMSTAT_SEMSTAT_Msk (0x3UL << SPIS_SEMSTAT_SEMSTAT_Pos) /*!< Bit mask of SEMSTAT field. */ +#define SPIS_SEMSTAT_SEMSTAT_Free (0x00UL) /*!< Semaphore is free. */ +#define SPIS_SEMSTAT_SEMSTAT_CPU (0x01UL) /*!< Semaphore is assigned to the CPU. */ +#define SPIS_SEMSTAT_SEMSTAT_SPIS (0x02UL) /*!< Semaphore is assigned to the SPIS. */ +#define SPIS_SEMSTAT_SEMSTAT_CPUPending (0x03UL) /*!< Semaphore is assigned to the SPIS, but a handover to the CPU is pending. */ + +/* Register: SPIS_STATUS */ +/* Description: Status from last transaction. */ + +/* Bit 1 : RX buffer overflow detected, and prevented. */ +#define SPIS_STATUS_OVERFLOW_Pos (1UL) /*!< Position of OVERFLOW field. */ +#define SPIS_STATUS_OVERFLOW_Msk (0x1UL << SPIS_STATUS_OVERFLOW_Pos) /*!< Bit mask of OVERFLOW field. */ +#define SPIS_STATUS_OVERFLOW_NotPresent (0UL) /*!< Error not present. */ +#define SPIS_STATUS_OVERFLOW_Present (1UL) /*!< Error present. */ +#define SPIS_STATUS_OVERFLOW_Clear (1UL) /*!< Clear on write. */ + +/* Bit 0 : TX buffer overread detected, and prevented. */ +#define SPIS_STATUS_OVERREAD_Pos (0UL) /*!< Position of OVERREAD field. */ +#define SPIS_STATUS_OVERREAD_Msk (0x1UL << SPIS_STATUS_OVERREAD_Pos) /*!< Bit mask of OVERREAD field. */ +#define SPIS_STATUS_OVERREAD_NotPresent (0UL) /*!< Error not present. */ +#define SPIS_STATUS_OVERREAD_Present (1UL) /*!< Error present. */ +#define SPIS_STATUS_OVERREAD_Clear (1UL) /*!< Clear on write. */ + +/* Register: SPIS_ENABLE */ +/* Description: Enable SPIS. */ + +/* Bits 2..0 : Enable or disable SPIS. */ +#define SPIS_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define SPIS_ENABLE_ENABLE_Msk (0x7UL << SPIS_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define SPIS_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPIS. */ +#define SPIS_ENABLE_ENABLE_Enabled (0x02UL) /*!< Enable SPIS. */ + +/* Register: SPIS_MAXRX */ +/* Description: Maximum number of bytes in the receive buffer. */ + +/* Bits 7..0 : Maximum number of bytes in the receive buffer. */ +#define SPIS_MAXRX_MAXRX_Pos (0UL) /*!< Position of MAXRX field. */ +#define SPIS_MAXRX_MAXRX_Msk (0xFFUL << SPIS_MAXRX_MAXRX_Pos) /*!< Bit mask of MAXRX field. */ + +/* Register: SPIS_AMOUNTRX */ +/* Description: Number of bytes received in last granted transaction. */ + +/* Bits 7..0 : Number of bytes received in last granted transaction. */ +#define SPIS_AMOUNTRX_AMOUNTRX_Pos (0UL) /*!< Position of AMOUNTRX field. */ +#define SPIS_AMOUNTRX_AMOUNTRX_Msk (0xFFUL << SPIS_AMOUNTRX_AMOUNTRX_Pos) /*!< Bit mask of AMOUNTRX field. */ + +/* Register: SPIS_MAXTX */ +/* Description: Maximum number of bytes in the transmit buffer. */ + +/* Bits 7..0 : Maximum number of bytes in the transmit buffer. */ +#define SPIS_MAXTX_MAXTX_Pos (0UL) /*!< Position of MAXTX field. */ +#define SPIS_MAXTX_MAXTX_Msk (0xFFUL << SPIS_MAXTX_MAXTX_Pos) /*!< Bit mask of MAXTX field. */ + +/* Register: SPIS_AMOUNTTX */ +/* Description: Number of bytes transmitted in last granted transaction. */ + +/* Bits 7..0 : Number of bytes transmitted in last granted transaction. */ +#define SPIS_AMOUNTTX_AMOUNTTX_Pos (0UL) /*!< Position of AMOUNTTX field. */ +#define SPIS_AMOUNTTX_AMOUNTTX_Msk (0xFFUL << SPIS_AMOUNTTX_AMOUNTTX_Pos) /*!< Bit mask of AMOUNTTX field. */ + +/* Register: SPIS_CONFIG */ +/* Description: Configuration register. */ + +/* Bit 2 : Serial clock (SCK) polarity. */ +#define SPIS_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */ +#define SPIS_CONFIG_CPOL_Msk (0x1UL << SPIS_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */ +#define SPIS_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */ +#define SPIS_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */ + +/* Bit 1 : Serial clock (SCK) phase. */ +#define SPIS_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */ +#define SPIS_CONFIG_CPHA_Msk (0x1UL << SPIS_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */ +#define SPIS_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */ +#define SPIS_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */ + +/* Bit 0 : Bit order. */ +#define SPIS_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */ +#define SPIS_CONFIG_ORDER_Msk (0x1UL << SPIS_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */ +#define SPIS_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */ +#define SPIS_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */ + +/* Register: SPIS_DEF */ +/* Description: Default character. */ + +/* Bits 7..0 : Default character. */ +#define SPIS_DEF_DEF_Pos (0UL) /*!< Position of DEF field. */ +#define SPIS_DEF_DEF_Msk (0xFFUL << SPIS_DEF_DEF_Pos) /*!< Bit mask of DEF field. */ + +/* Register: SPIS_ORC */ +/* Description: Over-read character. */ + +/* Bits 7..0 : Over-read character. */ +#define SPIS_ORC_ORC_Pos (0UL) /*!< Position of ORC field. */ +#define SPIS_ORC_ORC_Msk (0xFFUL << SPIS_ORC_ORC_Pos) /*!< Bit mask of ORC field. */ + +/* Register: SPIS_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define SPIS_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define SPIS_POWER_POWER_Msk (0x1UL << SPIS_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define SPIS_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define SPIS_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: TEMP */ +/* Description: Temperature Sensor. */ + +/* Register: TEMP_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 0 : Enable interrupt on DATARDY event. */ +#define TEMP_INTENSET_DATARDY_Pos (0UL) /*!< Position of DATARDY field. */ +#define TEMP_INTENSET_DATARDY_Msk (0x1UL << TEMP_INTENSET_DATARDY_Pos) /*!< Bit mask of DATARDY field. */ +#define TEMP_INTENSET_DATARDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define TEMP_INTENSET_DATARDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define TEMP_INTENSET_DATARDY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: TEMP_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 0 : Disable interrupt on DATARDY event. */ +#define TEMP_INTENCLR_DATARDY_Pos (0UL) /*!< Position of DATARDY field. */ +#define TEMP_INTENCLR_DATARDY_Msk (0x1UL << TEMP_INTENCLR_DATARDY_Pos) /*!< Bit mask of DATARDY field. */ +#define TEMP_INTENCLR_DATARDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define TEMP_INTENCLR_DATARDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define TEMP_INTENCLR_DATARDY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: TEMP_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define TEMP_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define TEMP_POWER_POWER_Msk (0x1UL << TEMP_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define TEMP_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define TEMP_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: TIMER */ +/* Description: Timer 0. */ + +/* Register: TIMER_SHORTS */ +/* Description: Shortcuts for Timer. */ + +/* Bit 11 : Shortcut between CC[3] event and the STOP task. */ +#define TIMER_SHORTS_COMPARE3_STOP_Pos (11UL) /*!< Position of COMPARE3_STOP field. */ +#define TIMER_SHORTS_COMPARE3_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE3_STOP_Pos) /*!< Bit mask of COMPARE3_STOP field. */ +#define TIMER_SHORTS_COMPARE3_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE3_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 10 : Shortcut between CC[2] event and the STOP task. */ +#define TIMER_SHORTS_COMPARE2_STOP_Pos (10UL) /*!< Position of COMPARE2_STOP field. */ +#define TIMER_SHORTS_COMPARE2_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE2_STOP_Pos) /*!< Bit mask of COMPARE2_STOP field. */ +#define TIMER_SHORTS_COMPARE2_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE2_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 9 : Shortcut between CC[1] event and the STOP task. */ +#define TIMER_SHORTS_COMPARE1_STOP_Pos (9UL) /*!< Position of COMPARE1_STOP field. */ +#define TIMER_SHORTS_COMPARE1_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE1_STOP_Pos) /*!< Bit mask of COMPARE1_STOP field. */ +#define TIMER_SHORTS_COMPARE1_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE1_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 8 : Shortcut between CC[0] event and the STOP task. */ +#define TIMER_SHORTS_COMPARE0_STOP_Pos (8UL) /*!< Position of COMPARE0_STOP field. */ +#define TIMER_SHORTS_COMPARE0_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE0_STOP_Pos) /*!< Bit mask of COMPARE0_STOP field. */ +#define TIMER_SHORTS_COMPARE0_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE0_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 3 : Shortcut between CC[3] event and the CLEAR task. */ +#define TIMER_SHORTS_COMPARE3_CLEAR_Pos (3UL) /*!< Position of COMPARE3_CLEAR field. */ +#define TIMER_SHORTS_COMPARE3_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE3_CLEAR_Pos) /*!< Bit mask of COMPARE3_CLEAR field. */ +#define TIMER_SHORTS_COMPARE3_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE3_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 2 : Shortcut between CC[2] event and the CLEAR task. */ +#define TIMER_SHORTS_COMPARE2_CLEAR_Pos (2UL) /*!< Position of COMPARE2_CLEAR field. */ +#define TIMER_SHORTS_COMPARE2_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE2_CLEAR_Pos) /*!< Bit mask of COMPARE2_CLEAR field. */ +#define TIMER_SHORTS_COMPARE2_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE2_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 1 : Shortcut between CC[1] event and the CLEAR task. */ +#define TIMER_SHORTS_COMPARE1_CLEAR_Pos (1UL) /*!< Position of COMPARE1_CLEAR field. */ +#define TIMER_SHORTS_COMPARE1_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE1_CLEAR_Pos) /*!< Bit mask of COMPARE1_CLEAR field. */ +#define TIMER_SHORTS_COMPARE1_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE1_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 0 : Shortcut between CC[0] event and the CLEAR task. */ +#define TIMER_SHORTS_COMPARE0_CLEAR_Pos (0UL) /*!< Position of COMPARE0_CLEAR field. */ +#define TIMER_SHORTS_COMPARE0_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE0_CLEAR_Pos) /*!< Bit mask of COMPARE0_CLEAR field. */ +#define TIMER_SHORTS_COMPARE0_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */ +#define TIMER_SHORTS_COMPARE0_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: TIMER_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 19 : Enable interrupt on COMPARE[3] */ +#define TIMER_INTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define TIMER_INTENSET_COMPARE3_Msk (0x1UL << TIMER_INTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define TIMER_INTENSET_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENSET_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENSET_COMPARE3_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 18 : Enable interrupt on COMPARE[2] */ +#define TIMER_INTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define TIMER_INTENSET_COMPARE2_Msk (0x1UL << TIMER_INTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define TIMER_INTENSET_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENSET_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENSET_COMPARE2_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 17 : Enable interrupt on COMPARE[1] */ +#define TIMER_INTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define TIMER_INTENSET_COMPARE1_Msk (0x1UL << TIMER_INTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define TIMER_INTENSET_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENSET_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENSET_COMPARE1_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 16 : Enable interrupt on COMPARE[0] */ +#define TIMER_INTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define TIMER_INTENSET_COMPARE0_Msk (0x1UL << TIMER_INTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define TIMER_INTENSET_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENSET_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENSET_COMPARE0_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: TIMER_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 19 : Disable interrupt on COMPARE[3] */ +#define TIMER_INTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */ +#define TIMER_INTENCLR_COMPARE3_Msk (0x1UL << TIMER_INTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */ +#define TIMER_INTENCLR_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENCLR_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENCLR_COMPARE3_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 18 : Disable interrupt on COMPARE[2] */ +#define TIMER_INTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */ +#define TIMER_INTENCLR_COMPARE2_Msk (0x1UL << TIMER_INTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */ +#define TIMER_INTENCLR_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENCLR_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENCLR_COMPARE2_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 17 : Disable interrupt on COMPARE[1] */ +#define TIMER_INTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */ +#define TIMER_INTENCLR_COMPARE1_Msk (0x1UL << TIMER_INTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */ +#define TIMER_INTENCLR_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENCLR_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENCLR_COMPARE1_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 16 : Disable interrupt on COMPARE[0] */ +#define TIMER_INTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */ +#define TIMER_INTENCLR_COMPARE0_Msk (0x1UL << TIMER_INTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */ +#define TIMER_INTENCLR_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */ +#define TIMER_INTENCLR_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */ +#define TIMER_INTENCLR_COMPARE0_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: TIMER_MODE */ +/* Description: Timer Mode selection. */ + +/* Bit 0 : Select Normal or Counter mode. */ +#define TIMER_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */ +#define TIMER_MODE_MODE_Msk (0x1UL << TIMER_MODE_MODE_Pos) /*!< Bit mask of MODE field. */ +#define TIMER_MODE_MODE_Timer (0UL) /*!< Timer in Normal mode. */ +#define TIMER_MODE_MODE_Counter (1UL) /*!< Timer in Counter mode. */ + +/* Register: TIMER_BITMODE */ +/* Description: Sets timer behaviour. */ + +/* Bits 1..0 : Sets timer behaviour ro be like the implementation of a timer with width as indicated. */ +#define TIMER_BITMODE_BITMODE_Pos (0UL) /*!< Position of BITMODE field. */ +#define TIMER_BITMODE_BITMODE_Msk (0x3UL << TIMER_BITMODE_BITMODE_Pos) /*!< Bit mask of BITMODE field. */ +#define TIMER_BITMODE_BITMODE_16Bit (0x00UL) /*!< 16-bit timer behaviour. */ +#define TIMER_BITMODE_BITMODE_08Bit (0x01UL) /*!< 8-bit timer behaviour. */ +#define TIMER_BITMODE_BITMODE_24Bit (0x02UL) /*!< 24-bit timer behaviour. */ +#define TIMER_BITMODE_BITMODE_32Bit (0x03UL) /*!< 32-bit timer behaviour. */ + +/* Register: TIMER_PRESCALER */ +/* Description: 4-bit prescaler to source clock frequency (max value 9). Source clock frequency is divided by 2^SCALE. */ + +/* Bits 3..0 : Timer PRESCALER value. Max value is 9. */ +#define TIMER_PRESCALER_PRESCALER_Pos (0UL) /*!< Position of PRESCALER field. */ +#define TIMER_PRESCALER_PRESCALER_Msk (0xFUL << TIMER_PRESCALER_PRESCALER_Pos) /*!< Bit mask of PRESCALER field. */ + +/* Register: TIMER_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define TIMER_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define TIMER_POWER_POWER_Msk (0x1UL << TIMER_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define TIMER_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define TIMER_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: TWI */ +/* Description: Two-wire interface master 0. */ + +/* Register: TWI_SHORTS */ +/* Description: Shortcuts for TWI. */ + +/* Bit 1 : Shortcut between BB event and the STOP task. */ +#define TWI_SHORTS_BB_STOP_Pos (1UL) /*!< Position of BB_STOP field. */ +#define TWI_SHORTS_BB_STOP_Msk (0x1UL << TWI_SHORTS_BB_STOP_Pos) /*!< Bit mask of BB_STOP field. */ +#define TWI_SHORTS_BB_STOP_Disabled (0UL) /*!< Shortcut disabled. */ +#define TWI_SHORTS_BB_STOP_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 0 : Shortcut between BB event and the SUSPEND task. */ +#define TWI_SHORTS_BB_SUSPEND_Pos (0UL) /*!< Position of BB_SUSPEND field. */ +#define TWI_SHORTS_BB_SUSPEND_Msk (0x1UL << TWI_SHORTS_BB_SUSPEND_Pos) /*!< Bit mask of BB_SUSPEND field. */ +#define TWI_SHORTS_BB_SUSPEND_Disabled (0UL) /*!< Shortcut disabled. */ +#define TWI_SHORTS_BB_SUSPEND_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: TWI_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 14 : Enable interrupt on BB event. */ +#define TWI_INTENSET_BB_Pos (14UL) /*!< Position of BB field. */ +#define TWI_INTENSET_BB_Msk (0x1UL << TWI_INTENSET_BB_Pos) /*!< Bit mask of BB field. */ +#define TWI_INTENSET_BB_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENSET_BB_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENSET_BB_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 9 : Enable interrupt on ERROR event. */ +#define TWI_INTENSET_ERROR_Pos (9UL) /*!< Position of ERROR field. */ +#define TWI_INTENSET_ERROR_Msk (0x1UL << TWI_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */ +#define TWI_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 7 : Enable interrupt on TXDSENT event. */ +#define TWI_INTENSET_TXDSENT_Pos (7UL) /*!< Position of TXDSENT field. */ +#define TWI_INTENSET_TXDSENT_Msk (0x1UL << TWI_INTENSET_TXDSENT_Pos) /*!< Bit mask of TXDSENT field. */ +#define TWI_INTENSET_TXDSENT_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENSET_TXDSENT_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENSET_TXDSENT_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 2 : Enable interrupt on READY event. */ +#define TWI_INTENSET_RXDREADY_Pos (2UL) /*!< Position of RXDREADY field. */ +#define TWI_INTENSET_RXDREADY_Msk (0x1UL << TWI_INTENSET_RXDREADY_Pos) /*!< Bit mask of RXDREADY field. */ +#define TWI_INTENSET_RXDREADY_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENSET_RXDREADY_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENSET_RXDREADY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on STOPPED event. */ +#define TWI_INTENSET_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */ +#define TWI_INTENSET_STOPPED_Msk (0x1UL << TWI_INTENSET_STOPPED_Pos) /*!< Bit mask of STOPPED field. */ +#define TWI_INTENSET_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENSET_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENSET_STOPPED_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: TWI_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 14 : Disable interrupt on BB event. */ +#define TWI_INTENCLR_BB_Pos (14UL) /*!< Position of BB field. */ +#define TWI_INTENCLR_BB_Msk (0x1UL << TWI_INTENCLR_BB_Pos) /*!< Bit mask of BB field. */ +#define TWI_INTENCLR_BB_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENCLR_BB_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENCLR_BB_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 9 : Disable interrupt on ERROR event. */ +#define TWI_INTENCLR_ERROR_Pos (9UL) /*!< Position of ERROR field. */ +#define TWI_INTENCLR_ERROR_Msk (0x1UL << TWI_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */ +#define TWI_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 7 : Disable interrupt on TXDSENT event. */ +#define TWI_INTENCLR_TXDSENT_Pos (7UL) /*!< Position of TXDSENT field. */ +#define TWI_INTENCLR_TXDSENT_Msk (0x1UL << TWI_INTENCLR_TXDSENT_Pos) /*!< Bit mask of TXDSENT field. */ +#define TWI_INTENCLR_TXDSENT_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENCLR_TXDSENT_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENCLR_TXDSENT_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 2 : Disable interrupt on RXDREADY event. */ +#define TWI_INTENCLR_RXDREADY_Pos (2UL) /*!< Position of RXDREADY field. */ +#define TWI_INTENCLR_RXDREADY_Msk (0x1UL << TWI_INTENCLR_RXDREADY_Pos) /*!< Bit mask of RXDREADY field. */ +#define TWI_INTENCLR_RXDREADY_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENCLR_RXDREADY_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENCLR_RXDREADY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on STOPPED event. */ +#define TWI_INTENCLR_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */ +#define TWI_INTENCLR_STOPPED_Msk (0x1UL << TWI_INTENCLR_STOPPED_Pos) /*!< Bit mask of STOPPED field. */ +#define TWI_INTENCLR_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */ +#define TWI_INTENCLR_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */ +#define TWI_INTENCLR_STOPPED_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: TWI_ERRORSRC */ +/* Description: Two-wire error source. Write error field to 1 to clear error. */ + +/* Bit 2 : NACK received after sending a data byte. */ +#define TWI_ERRORSRC_DNACK_Pos (2UL) /*!< Position of DNACK field. */ +#define TWI_ERRORSRC_DNACK_Msk (0x1UL << TWI_ERRORSRC_DNACK_Pos) /*!< Bit mask of DNACK field. */ +#define TWI_ERRORSRC_DNACK_NotPresent (0UL) /*!< Error not present. */ +#define TWI_ERRORSRC_DNACK_Present (1UL) /*!< Error present. */ +#define TWI_ERRORSRC_DNACK_Clear (1UL) /*!< Clear error on write. */ + +/* Bit 1 : NACK received after sending the address. */ +#define TWI_ERRORSRC_ANACK_Pos (1UL) /*!< Position of ANACK field. */ +#define TWI_ERRORSRC_ANACK_Msk (0x1UL << TWI_ERRORSRC_ANACK_Pos) /*!< Bit mask of ANACK field. */ +#define TWI_ERRORSRC_ANACK_NotPresent (0UL) /*!< Error not present. */ +#define TWI_ERRORSRC_ANACK_Present (1UL) /*!< Error present. */ +#define TWI_ERRORSRC_ANACK_Clear (1UL) /*!< Clear error on write. */ + +/* Register: TWI_ENABLE */ +/* Description: Enable two-wire master. */ + +/* Bits 2..0 : Enable or disable W2M */ +#define TWI_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define TWI_ENABLE_ENABLE_Msk (0x7UL << TWI_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define TWI_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled. */ +#define TWI_ENABLE_ENABLE_Enabled (0x05UL) /*!< Enabled. */ + +/* Register: TWI_RXD */ +/* Description: RX data register. */ + +/* Bits 7..0 : RX data from last transfer. */ +#define TWI_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */ +#define TWI_RXD_RXD_Msk (0xFFUL << TWI_RXD_RXD_Pos) /*!< Bit mask of RXD field. */ + +/* Register: TWI_TXD */ +/* Description: TX data register. */ + +/* Bits 7..0 : TX data for next transfer. */ +#define TWI_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */ +#define TWI_TXD_TXD_Msk (0xFFUL << TWI_TXD_TXD_Pos) /*!< Bit mask of TXD field. */ + +/* Register: TWI_FREQUENCY */ +/* Description: Two-wire frequency. */ + +/* Bits 31..0 : Two-wire master clock frequency. */ +#define TWI_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */ +#define TWI_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << TWI_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */ +#define TWI_FREQUENCY_FREQUENCY_K100 (0x01980000UL) /*!< 100 kbps. */ +#define TWI_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250 kbps. */ +#define TWI_FREQUENCY_FREQUENCY_K400 (0x06680000UL) /*!< 400 kbps. */ + +/* Register: TWI_ADDRESS */ +/* Description: Address used in the two-wire transfer. */ + +/* Bits 6..0 : Two-wire address. */ +#define TWI_ADDRESS_ADDRESS_Pos (0UL) /*!< Position of ADDRESS field. */ +#define TWI_ADDRESS_ADDRESS_Msk (0x7FUL << TWI_ADDRESS_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */ + +/* Register: TWI_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define TWI_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define TWI_POWER_POWER_Msk (0x1UL << TWI_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define TWI_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define TWI_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: UART */ +/* Description: Universal Asynchronous Receiver/Transmitter. */ + +/* Register: UART_SHORTS */ +/* Description: Shortcuts for TWI. */ + +/* Bit 4 : Shortcut between NCTS event and the STOPRX task. */ +#define UART_SHORTS_NCTS_STOPRX_Pos (4UL) /*!< Position of NCTS_STOPRX field. */ +#define UART_SHORTS_NCTS_STOPRX_Msk (0x1UL << UART_SHORTS_NCTS_STOPRX_Pos) /*!< Bit mask of NCTS_STOPRX field. */ +#define UART_SHORTS_NCTS_STOPRX_Disabled (0UL) /*!< Shortcut disabled. */ +#define UART_SHORTS_NCTS_STOPRX_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Bit 3 : Shortcut between CTS event and the STARTRX task. */ +#define UART_SHORTS_CTS_STARTRX_Pos (3UL) /*!< Position of CTS_STARTRX field. */ +#define UART_SHORTS_CTS_STARTRX_Msk (0x1UL << UART_SHORTS_CTS_STARTRX_Pos) /*!< Bit mask of CTS_STARTRX field. */ +#define UART_SHORTS_CTS_STARTRX_Disabled (0UL) /*!< Shortcut disabled. */ +#define UART_SHORTS_CTS_STARTRX_Enabled (1UL) /*!< Shortcut enabled. */ + +/* Register: UART_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 17 : Enable interrupt on RXTO event. */ +#define UART_INTENSET_RXTO_Pos (17UL) /*!< Position of RXTO field. */ +#define UART_INTENSET_RXTO_Msk (0x1UL << UART_INTENSET_RXTO_Pos) /*!< Bit mask of RXTO field. */ +#define UART_INTENSET_RXTO_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENSET_RXTO_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENSET_RXTO_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 9 : Enable interrupt on ERROR event. */ +#define UART_INTENSET_ERROR_Pos (9UL) /*!< Position of ERROR field. */ +#define UART_INTENSET_ERROR_Msk (0x1UL << UART_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */ +#define UART_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 7 : Enable interrupt on TXRDY event. */ +#define UART_INTENSET_TXDRDY_Pos (7UL) /*!< Position of TXDRDY field. */ +#define UART_INTENSET_TXDRDY_Msk (0x1UL << UART_INTENSET_TXDRDY_Pos) /*!< Bit mask of TXDRDY field. */ +#define UART_INTENSET_TXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENSET_TXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENSET_TXDRDY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 2 : Enable interrupt on RXRDY event. */ +#define UART_INTENSET_RXDRDY_Pos (2UL) /*!< Position of RXDRDY field. */ +#define UART_INTENSET_RXDRDY_Msk (0x1UL << UART_INTENSET_RXDRDY_Pos) /*!< Bit mask of RXDRDY field. */ +#define UART_INTENSET_RXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENSET_RXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENSET_RXDRDY_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 1 : Enable interrupt on NCTS event. */ +#define UART_INTENSET_NCTS_Pos (1UL) /*!< Position of NCTS field. */ +#define UART_INTENSET_NCTS_Msk (0x1UL << UART_INTENSET_NCTS_Pos) /*!< Bit mask of NCTS field. */ +#define UART_INTENSET_NCTS_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENSET_NCTS_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENSET_NCTS_Set (1UL) /*!< Enable interrupt on write. */ + +/* Bit 0 : Enable interrupt on CTS event. */ +#define UART_INTENSET_CTS_Pos (0UL) /*!< Position of CTS field. */ +#define UART_INTENSET_CTS_Msk (0x1UL << UART_INTENSET_CTS_Pos) /*!< Bit mask of CTS field. */ +#define UART_INTENSET_CTS_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENSET_CTS_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENSET_CTS_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: UART_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 17 : Disable interrupt on RXTO event. */ +#define UART_INTENCLR_RXTO_Pos (17UL) /*!< Position of RXTO field. */ +#define UART_INTENCLR_RXTO_Msk (0x1UL << UART_INTENCLR_RXTO_Pos) /*!< Bit mask of RXTO field. */ +#define UART_INTENCLR_RXTO_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENCLR_RXTO_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENCLR_RXTO_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 9 : Disable interrupt on ERROR event. */ +#define UART_INTENCLR_ERROR_Pos (9UL) /*!< Position of ERROR field. */ +#define UART_INTENCLR_ERROR_Msk (0x1UL << UART_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */ +#define UART_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 7 : Disable interrupt on TXRDY event. */ +#define UART_INTENCLR_TXDRDY_Pos (7UL) /*!< Position of TXDRDY field. */ +#define UART_INTENCLR_TXDRDY_Msk (0x1UL << UART_INTENCLR_TXDRDY_Pos) /*!< Bit mask of TXDRDY field. */ +#define UART_INTENCLR_TXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENCLR_TXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENCLR_TXDRDY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 2 : Disable interrupt on RXRDY event. */ +#define UART_INTENCLR_RXDRDY_Pos (2UL) /*!< Position of RXDRDY field. */ +#define UART_INTENCLR_RXDRDY_Msk (0x1UL << UART_INTENCLR_RXDRDY_Pos) /*!< Bit mask of RXDRDY field. */ +#define UART_INTENCLR_RXDRDY_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENCLR_RXDRDY_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENCLR_RXDRDY_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 1 : Disable interrupt on NCTS event. */ +#define UART_INTENCLR_NCTS_Pos (1UL) /*!< Position of NCTS field. */ +#define UART_INTENCLR_NCTS_Msk (0x1UL << UART_INTENCLR_NCTS_Pos) /*!< Bit mask of NCTS field. */ +#define UART_INTENCLR_NCTS_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENCLR_NCTS_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENCLR_NCTS_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Bit 0 : Disable interrupt on CTS event. */ +#define UART_INTENCLR_CTS_Pos (0UL) /*!< Position of CTS field. */ +#define UART_INTENCLR_CTS_Msk (0x1UL << UART_INTENCLR_CTS_Pos) /*!< Bit mask of CTS field. */ +#define UART_INTENCLR_CTS_Disabled (0UL) /*!< Interrupt disabled. */ +#define UART_INTENCLR_CTS_Enabled (1UL) /*!< Interrupt enabled. */ +#define UART_INTENCLR_CTS_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: UART_ERRORSRC */ +/* Description: Error source. Write error field to 1 to clear error. */ + +/* Bit 3 : The serial data input is '0' for longer than the length of a data frame. */ +#define UART_ERRORSRC_BREAK_Pos (3UL) /*!< Position of BREAK field. */ +#define UART_ERRORSRC_BREAK_Msk (0x1UL << UART_ERRORSRC_BREAK_Pos) /*!< Bit mask of BREAK field. */ +#define UART_ERRORSRC_BREAK_NotPresent (0UL) /*!< Error not present. */ +#define UART_ERRORSRC_BREAK_Present (1UL) /*!< Error present. */ +#define UART_ERRORSRC_BREAK_Clear (1UL) /*!< Clear error on write. */ + +/* Bit 2 : A valid stop bit is not detected on the serial data input after all bits in a character have been received. */ +#define UART_ERRORSRC_FRAMING_Pos (2UL) /*!< Position of FRAMING field. */ +#define UART_ERRORSRC_FRAMING_Msk (0x1UL << UART_ERRORSRC_FRAMING_Pos) /*!< Bit mask of FRAMING field. */ +#define UART_ERRORSRC_FRAMING_NotPresent (0UL) /*!< Error not present. */ +#define UART_ERRORSRC_FRAMING_Present (1UL) /*!< Error present. */ +#define UART_ERRORSRC_FRAMING_Clear (1UL) /*!< Clear error on write. */ + +/* Bit 1 : A character with bad parity is received. Only checked if HW parity control is enabled. */ +#define UART_ERRORSRC_PARITY_Pos (1UL) /*!< Position of PARITY field. */ +#define UART_ERRORSRC_PARITY_Msk (0x1UL << UART_ERRORSRC_PARITY_Pos) /*!< Bit mask of PARITY field. */ +#define UART_ERRORSRC_PARITY_NotPresent (0UL) /*!< Error not present. */ +#define UART_ERRORSRC_PARITY_Present (1UL) /*!< Error present. */ +#define UART_ERRORSRC_PARITY_Clear (1UL) /*!< Clear error on write. */ + +/* Bit 0 : A start bit is received while the previous data still lies in RXD. (Data loss). */ +#define UART_ERRORSRC_OVERRUN_Pos (0UL) /*!< Position of OVERRUN field. */ +#define UART_ERRORSRC_OVERRUN_Msk (0x1UL << UART_ERRORSRC_OVERRUN_Pos) /*!< Bit mask of OVERRUN field. */ +#define UART_ERRORSRC_OVERRUN_NotPresent (0UL) /*!< Error not present. */ +#define UART_ERRORSRC_OVERRUN_Present (1UL) /*!< Error present. */ +#define UART_ERRORSRC_OVERRUN_Clear (1UL) /*!< Clear error on write. */ + +/* Register: UART_ENABLE */ +/* Description: Enable UART and acquire IOs. */ + +/* Bits 2..0 : Enable or disable UART and acquire IOs. */ +#define UART_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */ +#define UART_ENABLE_ENABLE_Msk (0x7UL << UART_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */ +#define UART_ENABLE_ENABLE_Disabled (0x00UL) /*!< UART disabled. */ +#define UART_ENABLE_ENABLE_Enabled (0x04UL) /*!< UART enabled. */ + +/* Register: UART_RXD */ +/* Description: RXD register. On read action the buffer pointer is displaced. Once read the character is consummed. If read when no character available, the UART will stop working. */ + +/* Bits 7..0 : RX data from previous transfer. Double buffered. */ +#define UART_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */ +#define UART_RXD_RXD_Msk (0xFFUL << UART_RXD_RXD_Pos) /*!< Bit mask of RXD field. */ + +/* Register: UART_TXD */ +/* Description: TXD register. */ + +/* Bits 7..0 : TX data for transfer. */ +#define UART_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */ +#define UART_TXD_TXD_Msk (0xFFUL << UART_TXD_TXD_Pos) /*!< Bit mask of TXD field. */ + +/* Register: UART_BAUDRATE */ +/* Description: UART Baudrate. */ + +/* Bits 31..0 : UART baudrate. */ +#define UART_BAUDRATE_BAUDRATE_Pos (0UL) /*!< Position of BAUDRATE field. */ +#define UART_BAUDRATE_BAUDRATE_Msk (0xFFFFFFFFUL << UART_BAUDRATE_BAUDRATE_Pos) /*!< Bit mask of BAUDRATE field. */ +#define UART_BAUDRATE_BAUDRATE_Baud1200 (0x0004F000UL) /*!< 1200 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud2400 (0x0009D000UL) /*!< 2400 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud4800 (0x0013B000UL) /*!< 4800 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud9600 (0x00275000UL) /*!< 9600 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud14400 (0x003B0000UL) /*!< 14400 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud19200 (0x004EA000UL) /*!< 19200 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud28800 (0x0075F000UL) /*!< 28800 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud38400 (0x009D5000UL) /*!< 38400 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud57600 (0x00EBF000UL) /*!< 57600 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud76800 (0x013A9000UL) /*!< 76800 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud115200 (0x01D7E000UL) /*!< 115200 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud230400 (0x03AFB000UL) /*!< 230400 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud250000 (0x04000000UL) /*!< 250000 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud460800 (0x075F7000UL) /*!< 460800 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud921600 (0x0EBEDFA4UL) /*!< 921600 baud. */ +#define UART_BAUDRATE_BAUDRATE_Baud1M (0x10000000UL) /*!< 1M baud. */ + +/* Register: UART_CONFIG */ +/* Description: Configuration of parity and hardware flow control register. */ + +/* Bits 3..1 : Include parity bit. */ +#define UART_CONFIG_PARITY_Pos (1UL) /*!< Position of PARITY field. */ +#define UART_CONFIG_PARITY_Msk (0x7UL << UART_CONFIG_PARITY_Pos) /*!< Bit mask of PARITY field. */ +#define UART_CONFIG_PARITY_Excluded (0UL) /*!< Parity bit excluded. */ +#define UART_CONFIG_PARITY_Included (7UL) /*!< Parity bit included. */ + +/* Bit 0 : Hardware flow control. */ +#define UART_CONFIG_HWFC_Pos (0UL) /*!< Position of HWFC field. */ +#define UART_CONFIG_HWFC_Msk (0x1UL << UART_CONFIG_HWFC_Pos) /*!< Bit mask of HWFC field. */ +#define UART_CONFIG_HWFC_Disabled (0UL) /*!< Hardware flow control disabled. */ +#define UART_CONFIG_HWFC_Enabled (1UL) /*!< Hardware flow control enabled. */ + +/* Register: UART_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define UART_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define UART_POWER_POWER_Msk (0x1UL << UART_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define UART_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define UART_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/* Peripheral: UICR */ +/* Description: User Information Configuration. */ + +/* Register: UICR_RBPCONF */ +/* Description: Readback protection configuration. */ + +/* Bits 15..8 : Readback protect all code in the device. */ +#define UICR_RBPCONF_PALL_Pos (8UL) /*!< Position of PALL field. */ +#define UICR_RBPCONF_PALL_Msk (0xFFUL << UICR_RBPCONF_PALL_Pos) /*!< Bit mask of PALL field. */ +#define UICR_RBPCONF_PALL_Disabled (0xFFUL) /*!< Disabled. */ +#define UICR_RBPCONF_PALL_Enabled (0x00UL) /*!< Enabled. */ + +/* Bits 7..0 : Readback protect region 0. Will be ignored if pre-programmed factory code is present on the chip. */ +#define UICR_RBPCONF_PR0_Pos (0UL) /*!< Position of PR0 field. */ +#define UICR_RBPCONF_PR0_Msk (0xFFUL << UICR_RBPCONF_PR0_Pos) /*!< Bit mask of PR0 field. */ +#define UICR_RBPCONF_PR0_Disabled (0xFFUL) /*!< Disabled. */ +#define UICR_RBPCONF_PR0_Enabled (0x00UL) /*!< Enabled. */ + +/* Register: UICR_XTALFREQ */ +/* Description: Reset value for CLOCK XTALFREQ register. */ + +/* Bits 7..0 : Reset value for CLOCK XTALFREQ register. */ +#define UICR_XTALFREQ_XTALFREQ_Pos (0UL) /*!< Position of XTALFREQ field. */ +#define UICR_XTALFREQ_XTALFREQ_Msk (0xFFUL << UICR_XTALFREQ_XTALFREQ_Pos) /*!< Bit mask of XTALFREQ field. */ +#define UICR_XTALFREQ_XTALFREQ_16MHz (0xFFUL) /*!< 16MHz Xtal is used. */ +#define UICR_XTALFREQ_XTALFREQ_32MHz (0x00UL) /*!< 32MHz Xtal is used. */ + +/* Register: UICR_FWID */ +/* Description: Firmware ID. */ + +/* Bits 15..0 : Identification number for the firmware loaded into the chip. */ +#define UICR_FWID_FWID_Pos (0UL) /*!< Position of FWID field. */ +#define UICR_FWID_FWID_Msk (0xFFFFUL << UICR_FWID_FWID_Pos) /*!< Bit mask of FWID field. */ + + +/* Peripheral: WDT */ +/* Description: Watchdog Timer. */ + +/* Register: WDT_INTENSET */ +/* Description: Interrupt enable set register. */ + +/* Bit 0 : Enable interrupt on TIMEOUT event. */ +#define WDT_INTENSET_TIMEOUT_Pos (0UL) /*!< Position of TIMEOUT field. */ +#define WDT_INTENSET_TIMEOUT_Msk (0x1UL << WDT_INTENSET_TIMEOUT_Pos) /*!< Bit mask of TIMEOUT field. */ +#define WDT_INTENSET_TIMEOUT_Disabled (0UL) /*!< Interrupt disabled. */ +#define WDT_INTENSET_TIMEOUT_Enabled (1UL) /*!< Interrupt enabled. */ +#define WDT_INTENSET_TIMEOUT_Set (1UL) /*!< Enable interrupt on write. */ + +/* Register: WDT_INTENCLR */ +/* Description: Interrupt enable clear register. */ + +/* Bit 0 : Disable interrupt on TIMEOUT event. */ +#define WDT_INTENCLR_TIMEOUT_Pos (0UL) /*!< Position of TIMEOUT field. */ +#define WDT_INTENCLR_TIMEOUT_Msk (0x1UL << WDT_INTENCLR_TIMEOUT_Pos) /*!< Bit mask of TIMEOUT field. */ +#define WDT_INTENCLR_TIMEOUT_Disabled (0UL) /*!< Interrupt disabled. */ +#define WDT_INTENCLR_TIMEOUT_Enabled (1UL) /*!< Interrupt enabled. */ +#define WDT_INTENCLR_TIMEOUT_Clear (1UL) /*!< Disable interrupt on write. */ + +/* Register: WDT_RUNSTATUS */ +/* Description: Watchdog running status. */ + +/* Bit 0 : Watchdog running status. */ +#define WDT_RUNSTATUS_RUNSTATUS_Pos (0UL) /*!< Position of RUNSTATUS field. */ +#define WDT_RUNSTATUS_RUNSTATUS_Msk (0x1UL << WDT_RUNSTATUS_RUNSTATUS_Pos) /*!< Bit mask of RUNSTATUS field. */ +#define WDT_RUNSTATUS_RUNSTATUS_NotRunning (0UL) /*!< Watchdog timer is not running. */ +#define WDT_RUNSTATUS_RUNSTATUS_Running (1UL) /*!< Watchdog timer is running. */ + +/* Register: WDT_REQSTATUS */ +/* Description: Request status. */ + +/* Bit 7 : Request status for RR[7]. */ +#define WDT_REQSTATUS_RR7_Pos (7UL) /*!< Position of RR7 field. */ +#define WDT_REQSTATUS_RR7_Msk (0x1UL << WDT_REQSTATUS_RR7_Pos) /*!< Bit mask of RR7 field. */ +#define WDT_REQSTATUS_RR7_DisabledOrRequested (0UL) /*!< RR[7] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR7_EnabledAndUnrequested (1UL) /*!< RR[7] register is enabled and has not jet requested. */ + +/* Bit 6 : Request status for RR[6]. */ +#define WDT_REQSTATUS_RR6_Pos (6UL) /*!< Position of RR6 field. */ +#define WDT_REQSTATUS_RR6_Msk (0x1UL << WDT_REQSTATUS_RR6_Pos) /*!< Bit mask of RR6 field. */ +#define WDT_REQSTATUS_RR6_DisabledOrRequested (0UL) /*!< RR[6] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR6_EnabledAndUnrequested (1UL) /*!< RR[6] register is enabled and has not jet requested. */ + +/* Bit 5 : Request status for RR[5]. */ +#define WDT_REQSTATUS_RR5_Pos (5UL) /*!< Position of RR5 field. */ +#define WDT_REQSTATUS_RR5_Msk (0x1UL << WDT_REQSTATUS_RR5_Pos) /*!< Bit mask of RR5 field. */ +#define WDT_REQSTATUS_RR5_DisabledOrRequested (0UL) /*!< RR[5] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR5_EnabledAndUnrequested (1UL) /*!< RR[5] register is enabled and has not jet requested. */ + +/* Bit 4 : Request status for RR[4]. */ +#define WDT_REQSTATUS_RR4_Pos (4UL) /*!< Position of RR4 field. */ +#define WDT_REQSTATUS_RR4_Msk (0x1UL << WDT_REQSTATUS_RR4_Pos) /*!< Bit mask of RR4 field. */ +#define WDT_REQSTATUS_RR4_DisabledOrRequested (0UL) /*!< RR[4] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR4_EnabledAndUnrequested (1UL) /*!< RR[4] register is enabled and has not jet requested. */ + +/* Bit 3 : Request status for RR[3]. */ +#define WDT_REQSTATUS_RR3_Pos (3UL) /*!< Position of RR3 field. */ +#define WDT_REQSTATUS_RR3_Msk (0x1UL << WDT_REQSTATUS_RR3_Pos) /*!< Bit mask of RR3 field. */ +#define WDT_REQSTATUS_RR3_DisabledOrRequested (0UL) /*!< RR[3] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR3_EnabledAndUnrequested (1UL) /*!< RR[3] register is enabled and has not jet requested. */ + +/* Bit 2 : Request status for RR[2]. */ +#define WDT_REQSTATUS_RR2_Pos (2UL) /*!< Position of RR2 field. */ +#define WDT_REQSTATUS_RR2_Msk (0x1UL << WDT_REQSTATUS_RR2_Pos) /*!< Bit mask of RR2 field. */ +#define WDT_REQSTATUS_RR2_DisabledOrRequested (0UL) /*!< RR[2] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR2_EnabledAndUnrequested (1UL) /*!< RR[2] register is enabled and has not jet requested. */ + +/* Bit 1 : Request status for RR[1]. */ +#define WDT_REQSTATUS_RR1_Pos (1UL) /*!< Position of RR1 field. */ +#define WDT_REQSTATUS_RR1_Msk (0x1UL << WDT_REQSTATUS_RR1_Pos) /*!< Bit mask of RR1 field. */ +#define WDT_REQSTATUS_RR1_DisabledOrRequested (0UL) /*!< RR[1] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR1_EnabledAndUnrequested (1UL) /*!< RR[1] register is enabled and has not jet requested. */ + +/* Bit 0 : Request status for RR[0]. */ +#define WDT_REQSTATUS_RR0_Pos (0UL) /*!< Position of RR0 field. */ +#define WDT_REQSTATUS_RR0_Msk (0x1UL << WDT_REQSTATUS_RR0_Pos) /*!< Bit mask of RR0 field. */ +#define WDT_REQSTATUS_RR0_DisabledOrRequested (0UL) /*!< RR[0] register is not enabled or has already requested reload. */ +#define WDT_REQSTATUS_RR0_EnabledAndUnrequested (1UL) /*!< RR[0] register is enabled and has not jet requested. */ + +/* Register: WDT_RREN */ +/* Description: Reload request enable. */ + +/* Bit 7 : Enable or disable RR[7] register. */ +#define WDT_RREN_RR7_Pos (7UL) /*!< Position of RR7 field. */ +#define WDT_RREN_RR7_Msk (0x1UL << WDT_RREN_RR7_Pos) /*!< Bit mask of RR7 field. */ +#define WDT_RREN_RR7_Disabled (0UL) /*!< RR[7] register is disabled. */ +#define WDT_RREN_RR7_Enabled (1UL) /*!< RR[7] register is enabled. */ + +/* Bit 6 : Enable or disable RR[6] register. */ +#define WDT_RREN_RR6_Pos (6UL) /*!< Position of RR6 field. */ +#define WDT_RREN_RR6_Msk (0x1UL << WDT_RREN_RR6_Pos) /*!< Bit mask of RR6 field. */ +#define WDT_RREN_RR6_Disabled (0UL) /*!< RR[6] register is disabled. */ +#define WDT_RREN_RR6_Enabled (1UL) /*!< RR[6] register is enabled. */ + +/* Bit 5 : Enable or disable RR[5] register. */ +#define WDT_RREN_RR5_Pos (5UL) /*!< Position of RR5 field. */ +#define WDT_RREN_RR5_Msk (0x1UL << WDT_RREN_RR5_Pos) /*!< Bit mask of RR5 field. */ +#define WDT_RREN_RR5_Disabled (0UL) /*!< RR[5] register is disabled. */ +#define WDT_RREN_RR5_Enabled (1UL) /*!< RR[5] register is enabled. */ + +/* Bit 4 : Enable or disable RR[4] register. */ +#define WDT_RREN_RR4_Pos (4UL) /*!< Position of RR4 field. */ +#define WDT_RREN_RR4_Msk (0x1UL << WDT_RREN_RR4_Pos) /*!< Bit mask of RR4 field. */ +#define WDT_RREN_RR4_Disabled (0UL) /*!< RR[4] register is disabled. */ +#define WDT_RREN_RR4_Enabled (1UL) /*!< RR[4] register is enabled. */ + +/* Bit 3 : Enable or disable RR[3] register. */ +#define WDT_RREN_RR3_Pos (3UL) /*!< Position of RR3 field. */ +#define WDT_RREN_RR3_Msk (0x1UL << WDT_RREN_RR3_Pos) /*!< Bit mask of RR3 field. */ +#define WDT_RREN_RR3_Disabled (0UL) /*!< RR[3] register is disabled. */ +#define WDT_RREN_RR3_Enabled (1UL) /*!< RR[3] register is enabled. */ + +/* Bit 2 : Enable or disable RR[2] register. */ +#define WDT_RREN_RR2_Pos (2UL) /*!< Position of RR2 field. */ +#define WDT_RREN_RR2_Msk (0x1UL << WDT_RREN_RR2_Pos) /*!< Bit mask of RR2 field. */ +#define WDT_RREN_RR2_Disabled (0UL) /*!< RR[2] register is disabled. */ +#define WDT_RREN_RR2_Enabled (1UL) /*!< RR[2] register is enabled. */ + +/* Bit 1 : Enable or disable RR[1] register. */ +#define WDT_RREN_RR1_Pos (1UL) /*!< Position of RR1 field. */ +#define WDT_RREN_RR1_Msk (0x1UL << WDT_RREN_RR1_Pos) /*!< Bit mask of RR1 field. */ +#define WDT_RREN_RR1_Disabled (0UL) /*!< RR[1] register is disabled. */ +#define WDT_RREN_RR1_Enabled (1UL) /*!< RR[1] register is enabled. */ + +/* Bit 0 : Enable or disable RR[0] register. */ +#define WDT_RREN_RR0_Pos (0UL) /*!< Position of RR0 field. */ +#define WDT_RREN_RR0_Msk (0x1UL << WDT_RREN_RR0_Pos) /*!< Bit mask of RR0 field. */ +#define WDT_RREN_RR0_Disabled (0UL) /*!< RR[0] register is disabled. */ +#define WDT_RREN_RR0_Enabled (1UL) /*!< RR[0] register is enabled. */ + +/* Register: WDT_CONFIG */ +/* Description: Configuration register. */ + +/* Bit 3 : Configure the watchdog to pause or not while the CPU is halted by the debugger. */ +#define WDT_CONFIG_HALT_Pos (3UL) /*!< Position of HALT field. */ +#define WDT_CONFIG_HALT_Msk (0x1UL << WDT_CONFIG_HALT_Pos) /*!< Bit mask of HALT field. */ +#define WDT_CONFIG_HALT_Pause (0UL) /*!< Pause watchdog while the CPU is halted by the debugger. */ +#define WDT_CONFIG_HALT_Run (1UL) /*!< Do not pause watchdog while the CPU is halted by the debugger. */ + +/* Bit 0 : Configure the watchdog to pause or not while the CPU is sleeping. */ +#define WDT_CONFIG_SLEEP_Pos (0UL) /*!< Position of SLEEP field. */ +#define WDT_CONFIG_SLEEP_Msk (0x1UL << WDT_CONFIG_SLEEP_Pos) /*!< Bit mask of SLEEP field. */ +#define WDT_CONFIG_SLEEP_Pause (0UL) /*!< Pause watchdog while the CPU is asleep. */ +#define WDT_CONFIG_SLEEP_Run (1UL) /*!< Do not pause watchdog while the CPU is asleep. */ + +/* Register: WDT_RR */ +/* Description: Reload requests registers. */ + +/* Bits 31..0 : Reload register. */ +#define WDT_RR_RR_Pos (0UL) /*!< Position of RR field. */ +#define WDT_RR_RR_Msk (0xFFFFFFFFUL << WDT_RR_RR_Pos) /*!< Bit mask of RR field. */ +#define WDT_RR_RR_Reload (0x6E524635UL) /*!< Value to request a reload of the watchdog timer. */ + +/* Register: WDT_POWER */ +/* Description: Peripheral power control. */ + +/* Bit 0 : Peripheral power control. */ +#define WDT_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */ +#define WDT_POWER_POWER_Msk (0x1UL << WDT_POWER_POWER_Pos) /*!< Bit mask of POWER field. */ +#define WDT_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */ +#define WDT_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */ + + +/*lint --flb "Leave library region" */ +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_BLE_SMURFS/system_nrf51822.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,58 @@
+/* mbed Microcontroller Library
+
+ * Copyright (c) 2013 Nordic Semiconductor.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+
+#ifndef SYSTEM_NRF51_H
+#define SYSTEM_NRF51_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+/**
+ * Initialize the system
+ *
+ * @param none
+ * @return none
+ *
+ * @brief Setup the microcontroller system.
+ * Initialize the System and update the SystemCoreClock variable.
+ */
+extern void SystemInit (void);
+
+
+/**
+ * Update SystemCoreClock variable
+ *
+ * @param none
+ * @return none
+ *
+ * @brief Updates the SystemCoreClock with current core Clock
+ * retrieved from cpu registers.
+ */
+extern void SystemCoreClockUpdate (void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* SYSTEM_NRF51_H */
--- a/TARGET_HRM1017/TARGET_NORDIC/TARGET_MCU_NRF51822/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_HRM1017/TARGET_NORDIC/TARGET_MCU_NRF51822/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -45,6 +45,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_HRM1017/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_HRM1017/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_HRM1017/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_HRM1017/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_HRM1017/TOOLCHAIN_ARM_STD/startup_nRF51822.o has changed
Binary file TARGET_HRM1017/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_HRM1017/TOOLCHAIN_ARM_STD/system_nrf51822.o has changed
Binary file TARGET_HRM1017/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_HRM1017/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_HRM1017/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_HRM1017/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_HRM1017/TOOLCHAIN_GCC_ARM/system_nrf51822.o has changed
--- a/TARGET_HRM1017/nrf51.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_HRM1017/nrf51.h Tue Feb 03 15:31:20 2015 +0000 @@ -376,7 +376,8 @@ __IO uint32_t EVENTS_RXTO; /*!< Receiver timeout. */ __I uint32_t RESERVED5[46]; __IO uint32_t SHORTS; /*!< Shortcuts for TWI. */ - __I uint32_t RESERVED6[64]; + __I uint32_t RESERVED6[63]; + __IO uint32_t INTEN; /*!< Interrupt enable register. */ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ __I uint32_t RESERVED7[93]; @@ -1213,4 +1214,3 @@ #endif /* nRF51_H */ -
--- a/TARGET_K20D50M/MK20D5.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_K20D50M/MK20D5.h Tue Feb 03 15:31:20 2015 +0000 @@ -14,7 +14,7 @@ ** Abstract: ** CMSIS Peripheral Access Layer for MK20D5 ** -** Copyright: 1997 - 2012 Freescale Semiconductor, Inc. All Rights Reserved. +** Copyright: 1997 - 2015 Freescale Semiconductor, Inc. All Rights Reserved. ** ** http: www.freescale.com ** mail: support@freescale.com
--- a/TARGET_K20D50M/TARGET_Freescale/TARGET_K20D50M/PeripheralNames.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,78 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- UART_0 = (int)UART0_BASE,
- UART_1 = (int)UART1_BASE,
- UART_2 = (int)UART2_BASE
-} UARTName;
-#define STDIO_UART_TX USBTX
-#define STDIO_UART_RX USBRX
-#define STDIO_UART UART_0
-
-typedef enum {
- I2C_0 = (int)I2C0_BASE,
-} I2CName;
-
-#define TPM_SHIFT 8
-typedef enum {
- PWM_1 = (0 << TPM_SHIFT) | (0), // FTM0 CH0
- PWM_2 = (0 << TPM_SHIFT) | (1), // FTM0 CH1
- PWM_3 = (0 << TPM_SHIFT) | (2), // FTM0 CH2
- PWM_4 = (0 << TPM_SHIFT) | (3), // FTM0 CH3
- PWM_5 = (0 << TPM_SHIFT) | (4), // FTM0 CH4
- PWM_6 = (0 << TPM_SHIFT) | (5), // FTM0 CH5
- PWM_7 = (0 << TPM_SHIFT) | (6), // FTM0 CH6
- PWM_8 = (0 << TPM_SHIFT) | (7), // FTM0 CH7
- PWM_9 = (1 << TPM_SHIFT) | (0), // FTM1 CH0
- PWM_10 = (1 << TPM_SHIFT) | (1), // FTM1 CH1
-} PWMName;
-
-typedef enum {
- ADC0_SE4b = 4,
- ADC0_SE5b = 5,
- ADC0_SE6b = 6,
- ADC0_SE7b = 7,
- ADC0_SE8 = 8,
- ADC0_SE9 = 9,
- ADC0_SE12 = 12,
- ADC0_SE13 = 13,
- ADC0_SE14 = 14,
- ADC0_SE15 = 15
-} ADCName;
-
-typedef enum {
- DAC_0 = 0
-} DACName;
-
-
-typedef enum {
- SPI_0 = (int)SPI0_BASE,
-} SPIName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/TARGET_K20D50M/TARGET_Freescale/TARGET_K20D50M/PinNames.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,256 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-/* PCR - 0x1000 */
-#define PORT_SHIFT 12
-
-typedef enum {
- PTA0 = 0x0,
- PTA1 = 0x4,
- PTA2 = 0x8,
- PTA3 = 0xc,
- PTA4 = 0x10,
- PTA5 = 0x14,
- PTA6 = 0x18,
- PTA7 = 0x1c,
- PTA8 = 0x20,
- PTA9 = 0x24,
- PTA10 = 0x28,
- PTA11 = 0x2c,
- PTA12 = 0x30,
- PTA13 = 0x34,
- PTA14 = 0x38,
- PTA15 = 0x3c,
- PTA16 = 0x40,
- PTA17 = 0x44,
- PTA18 = 0x48,
- PTA19 = 0x4c,
- PTA20 = 0x50,
- PTA21 = 0x54,
- PTA22 = 0x58,
- PTA23 = 0x5c,
- PTA24 = 0x60,
- PTA25 = 0x64,
- PTA26 = 0x68,
- PTA27 = 0x6c,
- PTA28 = 0x70,
- PTA29 = 0x74,
- PTA30 = 0x78,
- PTA31 = 0x7c,
- PTB0 = 0x1000,
- PTB1 = 0x1004,
- PTB2 = 0x1008,
- PTB3 = 0x100c,
- PTB4 = 0x1010,
- PTB5 = 0x1014,
- PTB6 = 0x1018,
- PTB7 = 0x101c,
- PTB8 = 0x1020,
- PTB9 = 0x1024,
- PTB10 = 0x1028,
- PTB11 = 0x102c,
- PTB12 = 0x1030,
- PTB13 = 0x1034,
- PTB14 = 0x1038,
- PTB15 = 0x103c,
- PTB16 = 0x1040,
- PTB17 = 0x1044,
- PTB18 = 0x1048,
- PTB19 = 0x104c,
- PTB20 = 0x1050,
- PTB21 = 0x1054,
- PTB22 = 0x1058,
- PTB23 = 0x105c,
- PTB24 = 0x1060,
- PTB25 = 0x1064,
- PTB26 = 0x1068,
- PTB27 = 0x106c,
- PTB28 = 0x1070,
- PTB29 = 0x1074,
- PTB30 = 0x1078,
- PTB31 = 0x107c,
- PTC0 = 0x2000,
- PTC1 = 0x2004,
- PTC2 = 0x2008,
- PTC3 = 0x200c,
- PTC4 = 0x2010,
- PTC5 = 0x2014,
- PTC6 = 0x2018,
- PTC7 = 0x201c,
- PTC8 = 0x2020,
- PTC9 = 0x2024,
- PTC10 = 0x2028,
- PTC11 = 0x202c,
- PTC12 = 0x2030,
- PTC13 = 0x2034,
- PTC14 = 0x2038,
- PTC15 = 0x203c,
- PTC16 = 0x2040,
- PTC17 = 0x2044,
- PTC18 = 0x2048,
- PTC19 = 0x204c,
- PTC20 = 0x2050,
- PTC21 = 0x2054,
- PTC22 = 0x2058,
- PTC23 = 0x205c,
- PTC24 = 0x2060,
- PTC25 = 0x2064,
- PTC26 = 0x2068,
- PTC27 = 0x206c,
- PTC28 = 0x2070,
- PTC29 = 0x2074,
- PTC30 = 0x2078,
- PTC31 = 0x207c,
- PTD0 = 0x3000,
- PTD1 = 0x3004,
- PTD2 = 0x3008,
- PTD3 = 0x300c,
- PTD4 = 0x3010,
- PTD5 = 0x3014,
- PTD6 = 0x3018,
- PTD7 = 0x301c,
- PTD8 = 0x3020,
- PTD9 = 0x3024,
- PTD10 = 0x3028,
- PTD11 = 0x302c,
- PTD12 = 0x3030,
- PTD13 = 0x3034,
- PTD14 = 0x3038,
- PTD15 = 0x303c,
- PTD16 = 0x3040,
- PTD17 = 0x3044,
- PTD18 = 0x3048,
- PTD19 = 0x304c,
- PTD20 = 0x3050,
- PTD21 = 0x3054,
- PTD22 = 0x3058,
- PTD23 = 0x305c,
- PTD24 = 0x3060,
- PTD25 = 0x3064,
- PTD26 = 0x3068,
- PTD27 = 0x306c,
- PTD28 = 0x3070,
- PTD29 = 0x3074,
- PTD30 = 0x3078,
- PTD31 = 0x307c,
- PTE0 = 0x4000,
- PTE1 = 0x4004,
- PTE2 = 0x4008,
- PTE3 = 0x400c,
- PTE4 = 0x4010,
- PTE5 = 0x4014,
- PTE6 = 0x4018,
- PTE7 = 0x401c,
- PTE8 = 0x4020,
- PTE9 = 0x4024,
- PTE10 = 0x4028,
- PTE11 = 0x402c,
- PTE12 = 0x4030,
- PTE13 = 0x4034,
- PTE14 = 0x4038,
- PTE15 = 0x403c,
- PTE16 = 0x4040,
- PTE17 = 0x4044,
- PTE18 = 0x4048,
- PTE19 = 0x404c,
- PTE20 = 0x4050,
- PTE21 = 0x4054,
- PTE22 = 0x4058,
- PTE23 = 0x405c,
- PTE24 = 0x4060,
- PTE25 = 0x4064,
- PTE26 = 0x4068,
- PTE27 = 0x406c,
- PTE28 = 0x4070,
- PTE29 = 0x4074,
- PTE30 = 0x4078,
- PTE31 = 0x407c,
-
- LED_RED = PTC3,
- LED_GREEN = PTD4,
- LED_BLUE = PTA2,
-
- // mbed original LED naming
- LED1 = LED_RED,
- LED2 = LED_GREEN,
- LED3 = LED_BLUE,
- LED4 = LED_BLUE,
-
- // USB Pins
- USBTX = PTB17,
- USBRX = PTB16,
-
- // Arduino Headers
- D0 = PTE1,
- D1 = PTE0,
- D2 = PTA5,
- D3 = PTD4,
- D4 = PTC8,
- D5 = PTA1,
- D6 = PTC3,
- D7 = PTC4,
- D8 = PTA12,
- D9 = PTA2,
- D10 = PTC2,
- D11 = PTD2,
- D12 = PTD3,
- D13 = PTD1,
- D14 = PTB3,
- D15 = PTB2,
-
- A0 = PTC0,
- A1 = PTC1,
- A2 = PTD6,
- A3 = PTD5,
- A4 = PTB1,
- A5 = PTB0,
-
- I2C_SCL = D15,
- I2C_SDA = D14,
-
- TSI_ELEC0 = PTB16,
- TSI_ELEC1 = PTB17,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-
-typedef enum {
- PullNone = 0,
- PullDown = 2,
- PullUp = 3,
- PullDefault = PullUp
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/TARGET_K20D50M/TARGET_Freescale/TARGET_K20D50M/PortNames.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,35 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortE = 4
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/TARGET_K20D50M/TARGET_Freescale/TARGET_K20D50M/clk_freqs.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,97 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef CLK_FREQS_H
-#define CLK_FREQS_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*!
- * \brief Get the peripheral bus clock frequency
- * \return Bus frequency
- */
-static inline uint32_t bus_frequency(void) {
- return SystemCoreClock / (((SIM->CLKDIV1 & SIM_CLKDIV1_OUTDIV2_MASK) >> SIM_CLKDIV1_OUTDIV2_SHIFT) + 1);
-}
-
-/*!
- * \brief Get external oscillator (crystal) frequency
- * \return External osc frequency
- */
-static uint32_t extosc_frequency(void) {
- uint32_t MCGClock = SystemCoreClock * (1u + ((SIM->CLKDIV1 & SIM_CLKDIV1_OUTDIV1_MASK) >> SIM_CLKDIV1_OUTDIV1_SHIFT));
-
- if ((MCG->C1 & MCG_C1_CLKS_MASK) == MCG_C1_CLKS(2)) //MCG clock = external reference clock
- return MCGClock;
-
- if ((MCG->C1 & MCG_C1_CLKS_MASK) == MCG_C1_CLKS(0)) { //PLL/FLL is selected
- uint32_t divider, multiplier;
- if ((MCG->C6 & MCG_C6_PLLS_MASK) == 0x0u) { //FLL is selected
- if ((MCG->S & MCG_S_IREFST_MASK) == 0x0u) { //FLL uses external reference
- divider = (uint8_t)(1u << ((MCG->C1 & MCG_C1_FRDIV_MASK) >> MCG_C1_FRDIV_SHIFT));
- if ((MCG->C2 & MCG_C2_RANGE0_MASK) != 0x0u)
- divider <<= 5u;
- /* Select correct multiplier to calculate the MCG output clock */
- switch (MCG->C4 & (MCG_C4_DMX32_MASK | MCG_C4_DRST_DRS_MASK)) {
- case 0x0u:
- multiplier = 640u;
- break;
- case 0x20u:
- multiplier = 1280u;
- break;
- case 0x40u:
- multiplier = 1920u;
- break;
- case 0x60u:
- multiplier = 2560u;
- break;
- case 0x80u:
- multiplier = 732u;
- break;
- case 0xA0u:
- multiplier = 1464u;
- break;
- case 0xC0u:
- multiplier = 2197u;
- break;
- case 0xE0u:
- default:
- multiplier = 2929u;
- break;
- }
-
- return MCGClock * divider / multiplier;
- }
- } else { //PLL is selected
- divider = (1u + (MCG->C5 & MCG_C5_PRDIV0_MASK));
- multiplier = ((MCG->C6 & MCG_C6_VDIV0_MASK) + 24u);
- return MCGClock * divider / multiplier;
- }
- }
-
- //In all other cases either there is no crystal or we cannot determine it
- //For example when the FLL is running on the internal reference, and there is also an
- //external crystal. However these are unlikely situations
- return 0;
-}
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/TARGET_K20D50M/TARGET_Freescale/TARGET_K20D50M/device.h Thu Nov 27 13:33:22 2014 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,58 +0,0 @@ -/* mbed Microcontroller Library - * Copyright (c) 2006-2013 ARM Limited - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 0 - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_CAN 0 - -#define DEVICE_RTC 1 - -#define DEVICE_ETHERNET 0 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SEMIHOST 1 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_SLEEP 1 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 1 - -#include "objects.h" - -#endif
--- a/TARGET_K20D50M/TARGET_Freescale/TARGET_K20D50M/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,53 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_GPIO_OBJECT_H
-#define MBED_GPIO_OBJECT_H
-
-#include "mbed_assert.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct {
- PinName pin;
- uint32_t mask;
-
- __IO uint32_t *reg_dir;
- __IO uint32_t *reg_set;
- __IO uint32_t *reg_clr;
- __I uint32_t *reg_in;
-} gpio_t;
-
-static inline void gpio_write(gpio_t *obj, int value) {
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (value) {
- *obj->reg_set = obj->mask;
- } else {
- *obj->reg_clr = obj->mask;
- }
-}
-
-static inline int gpio_read(gpio_t *obj) {
- MBED_ASSERT(obj->pin != (PinName)NC);
- return ((*obj->reg_in & obj->mask) ? 1 : 0);
-}
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/TARGET_K20D50M/TARGET_Freescale/TARGET_K20D50M/objects.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,71 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- uint32_t port;
- uint32_t pin;
- uint32_t ch;
-};
-
-struct port_s {
- __IO uint32_t *reg_dir;
- __IO uint32_t *reg_out;
- __I uint32_t *reg_in;
- PortName port;
- uint32_t mask;
-};
-
-struct pwmout_s {
- __IO uint32_t *MOD;
- __IO uint32_t *CNT;
- __IO uint32_t *CnV;
-};
-
-struct serial_s {
- UART_Type *uart;
- int index;
-};
-
-struct analogin_s {
- ADCName adc;
-};
-
-struct i2c_s {
- I2C_Type *i2c;
-};
-
-struct spi_s {
- SPI_Type *spi;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_K20D50M/TARGET_Freescale/TARGET_K20XX/PeripheralPins.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,46 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2015 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef MBED_PERIPHERALPINS_H +#define MBED_PERIPHERALPINS_H + +#include "pinmap.h" +#include "PeripheralNames.h" + +/************ADC***************/ +extern const PinMap PinMap_ADC[]; + +/************DAC***************/ +extern const PinMap PinMap_DAC[]; + +/************I2C***************/ +extern const PinMap PinMap_I2C_SDA[]; +extern const PinMap PinMap_I2C_SCL[]; + +/************UART***************/ +extern const PinMap PinMap_UART_TX[]; +extern const PinMap PinMap_UART_RX[]; + +/************SPI***************/ +extern const PinMap PinMap_SPI_SCLK[]; +extern const PinMap PinMap_SPI_MOSI[]; +extern const PinMap PinMap_SPI_MISO[]; +extern const PinMap PinMap_SPI_SSEL[]; + +/************PWM***************/ +extern const PinMap PinMap_PWM[]; + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_K20D50M/TARGET_Freescale/TARGET_K20XX/PortNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,35 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortE = 4
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_K20D50M/TARGET_Freescale/TARGET_K20XX/TARGET_K20D50M/PeripheralNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,73 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ UART_0 = (int)UART0_BASE,
+ UART_1 = (int)UART1_BASE,
+ UART_2 = (int)UART2_BASE
+} UARTName;
+#define STDIO_UART_TX USBTX
+#define STDIO_UART_RX USBRX
+#define STDIO_UART UART_0
+
+typedef enum {
+ I2C_0 = (int)I2C0_BASE,
+} I2CName;
+
+#define TPM_SHIFT 8
+typedef enum {
+ PWM_1 = (0 << TPM_SHIFT) | (0), // FTM0 CH0
+ PWM_2 = (0 << TPM_SHIFT) | (1), // FTM0 CH1
+ PWM_3 = (0 << TPM_SHIFT) | (2), // FTM0 CH2
+ PWM_4 = (0 << TPM_SHIFT) | (3), // FTM0 CH3
+ PWM_5 = (0 << TPM_SHIFT) | (4), // FTM0 CH4
+ PWM_6 = (0 << TPM_SHIFT) | (5), // FTM0 CH5
+ PWM_7 = (0 << TPM_SHIFT) | (6), // FTM0 CH6
+ PWM_8 = (0 << TPM_SHIFT) | (7), // FTM0 CH7
+ PWM_9 = (1 << TPM_SHIFT) | (0), // FTM1 CH0
+ PWM_10 = (1 << TPM_SHIFT) | (1), // FTM1 CH1
+} PWMName;
+
+typedef enum {
+ ADC0_SE4b = 4,
+ ADC0_SE5b = 5,
+ ADC0_SE6b = 6,
+ ADC0_SE7b = 7,
+ ADC0_SE8 = 8,
+ ADC0_SE9 = 9,
+ ADC0_SE12 = 12,
+ ADC0_SE13 = 13,
+ ADC0_SE14 = 14,
+ ADC0_SE15 = 15
+} ADCName;
+
+typedef enum {
+ SPI_0 = (int)SPI0_BASE,
+} SPIName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_K20D50M/TARGET_Freescale/TARGET_K20XX/TARGET_K20D50M/PinNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,256 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+/* PCR - 0x1000 */
+#define PORT_SHIFT 12
+
+typedef enum {
+ PTA0 = 0x0,
+ PTA1 = 0x4,
+ PTA2 = 0x8,
+ PTA3 = 0xc,
+ PTA4 = 0x10,
+ PTA5 = 0x14,
+ PTA6 = 0x18,
+ PTA7 = 0x1c,
+ PTA8 = 0x20,
+ PTA9 = 0x24,
+ PTA10 = 0x28,
+ PTA11 = 0x2c,
+ PTA12 = 0x30,
+ PTA13 = 0x34,
+ PTA14 = 0x38,
+ PTA15 = 0x3c,
+ PTA16 = 0x40,
+ PTA17 = 0x44,
+ PTA18 = 0x48,
+ PTA19 = 0x4c,
+ PTA20 = 0x50,
+ PTA21 = 0x54,
+ PTA22 = 0x58,
+ PTA23 = 0x5c,
+ PTA24 = 0x60,
+ PTA25 = 0x64,
+ PTA26 = 0x68,
+ PTA27 = 0x6c,
+ PTA28 = 0x70,
+ PTA29 = 0x74,
+ PTA30 = 0x78,
+ PTA31 = 0x7c,
+ PTB0 = 0x1000,
+ PTB1 = 0x1004,
+ PTB2 = 0x1008,
+ PTB3 = 0x100c,
+ PTB4 = 0x1010,
+ PTB5 = 0x1014,
+ PTB6 = 0x1018,
+ PTB7 = 0x101c,
+ PTB8 = 0x1020,
+ PTB9 = 0x1024,
+ PTB10 = 0x1028,
+ PTB11 = 0x102c,
+ PTB12 = 0x1030,
+ PTB13 = 0x1034,
+ PTB14 = 0x1038,
+ PTB15 = 0x103c,
+ PTB16 = 0x1040,
+ PTB17 = 0x1044,
+ PTB18 = 0x1048,
+ PTB19 = 0x104c,
+ PTB20 = 0x1050,
+ PTB21 = 0x1054,
+ PTB22 = 0x1058,
+ PTB23 = 0x105c,
+ PTB24 = 0x1060,
+ PTB25 = 0x1064,
+ PTB26 = 0x1068,
+ PTB27 = 0x106c,
+ PTB28 = 0x1070,
+ PTB29 = 0x1074,
+ PTB30 = 0x1078,
+ PTB31 = 0x107c,
+ PTC0 = 0x2000,
+ PTC1 = 0x2004,
+ PTC2 = 0x2008,
+ PTC3 = 0x200c,
+ PTC4 = 0x2010,
+ PTC5 = 0x2014,
+ PTC6 = 0x2018,
+ PTC7 = 0x201c,
+ PTC8 = 0x2020,
+ PTC9 = 0x2024,
+ PTC10 = 0x2028,
+ PTC11 = 0x202c,
+ PTC12 = 0x2030,
+ PTC13 = 0x2034,
+ PTC14 = 0x2038,
+ PTC15 = 0x203c,
+ PTC16 = 0x2040,
+ PTC17 = 0x2044,
+ PTC18 = 0x2048,
+ PTC19 = 0x204c,
+ PTC20 = 0x2050,
+ PTC21 = 0x2054,
+ PTC22 = 0x2058,
+ PTC23 = 0x205c,
+ PTC24 = 0x2060,
+ PTC25 = 0x2064,
+ PTC26 = 0x2068,
+ PTC27 = 0x206c,
+ PTC28 = 0x2070,
+ PTC29 = 0x2074,
+ PTC30 = 0x2078,
+ PTC31 = 0x207c,
+ PTD0 = 0x3000,
+ PTD1 = 0x3004,
+ PTD2 = 0x3008,
+ PTD3 = 0x300c,
+ PTD4 = 0x3010,
+ PTD5 = 0x3014,
+ PTD6 = 0x3018,
+ PTD7 = 0x301c,
+ PTD8 = 0x3020,
+ PTD9 = 0x3024,
+ PTD10 = 0x3028,
+ PTD11 = 0x302c,
+ PTD12 = 0x3030,
+ PTD13 = 0x3034,
+ PTD14 = 0x3038,
+ PTD15 = 0x303c,
+ PTD16 = 0x3040,
+ PTD17 = 0x3044,
+ PTD18 = 0x3048,
+ PTD19 = 0x304c,
+ PTD20 = 0x3050,
+ PTD21 = 0x3054,
+ PTD22 = 0x3058,
+ PTD23 = 0x305c,
+ PTD24 = 0x3060,
+ PTD25 = 0x3064,
+ PTD26 = 0x3068,
+ PTD27 = 0x306c,
+ PTD28 = 0x3070,
+ PTD29 = 0x3074,
+ PTD30 = 0x3078,
+ PTD31 = 0x307c,
+ PTE0 = 0x4000,
+ PTE1 = 0x4004,
+ PTE2 = 0x4008,
+ PTE3 = 0x400c,
+ PTE4 = 0x4010,
+ PTE5 = 0x4014,
+ PTE6 = 0x4018,
+ PTE7 = 0x401c,
+ PTE8 = 0x4020,
+ PTE9 = 0x4024,
+ PTE10 = 0x4028,
+ PTE11 = 0x402c,
+ PTE12 = 0x4030,
+ PTE13 = 0x4034,
+ PTE14 = 0x4038,
+ PTE15 = 0x403c,
+ PTE16 = 0x4040,
+ PTE17 = 0x4044,
+ PTE18 = 0x4048,
+ PTE19 = 0x404c,
+ PTE20 = 0x4050,
+ PTE21 = 0x4054,
+ PTE22 = 0x4058,
+ PTE23 = 0x405c,
+ PTE24 = 0x4060,
+ PTE25 = 0x4064,
+ PTE26 = 0x4068,
+ PTE27 = 0x406c,
+ PTE28 = 0x4070,
+ PTE29 = 0x4074,
+ PTE30 = 0x4078,
+ PTE31 = 0x407c,
+
+ LED_RED = PTC3,
+ LED_GREEN = PTD4,
+ LED_BLUE = PTA2,
+
+ // mbed original LED naming
+ LED1 = LED_RED,
+ LED2 = LED_GREEN,
+ LED3 = LED_BLUE,
+ LED4 = LED_BLUE,
+
+ // USB Pins
+ USBTX = PTB17,
+ USBRX = PTB16,
+
+ // Arduino Headers
+ D0 = PTE1,
+ D1 = PTE0,
+ D2 = PTA5,
+ D3 = PTD4,
+ D4 = PTC8,
+ D5 = PTA1,
+ D6 = PTC3,
+ D7 = PTC4,
+ D8 = PTA12,
+ D9 = PTA2,
+ D10 = PTC2,
+ D11 = PTD2,
+ D12 = PTD3,
+ D13 = PTD1,
+ D14 = PTB3,
+ D15 = PTB2,
+
+ A0 = PTC0,
+ A1 = PTC1,
+ A2 = PTD6,
+ A3 = PTD5,
+ A4 = PTB1,
+ A5 = PTB0,
+
+ I2C_SCL = D15,
+ I2C_SDA = D14,
+
+ TSI_ELEC0 = PTB16,
+ TSI_ELEC1 = PTB17,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+
+typedef enum {
+ PullNone = 0,
+ PullDown = 2,
+ PullUp = 3,
+ PullDefault = PullUp
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_K20D50M/TARGET_Freescale/TARGET_K20XX/TARGET_K20D50M/device.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,58 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2015 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_CAN 0 + +#define DEVICE_RTC 1 + +#define DEVICE_ETHERNET 0 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SEMIHOST 1 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_SLEEP 1 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 1 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_K20D50M/TARGET_Freescale/TARGET_K20XX/clk_freqs.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,115 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef CLK_FREQS_H
+#define CLK_FREQS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*!
+ * \brief Get the peripheral bus clock frequency
+ * \return Bus frequency
+ */
+static inline uint32_t bus_frequency(void) {
+ return SystemCoreClock / (((SIM->CLKDIV1 & SIM_CLKDIV1_OUTDIV2_MASK) >> SIM_CLKDIV1_OUTDIV2_SHIFT) + 1);
+}
+
+/*!
+ * \brief Get external oscillator (crystal) frequency
+ * \return External osc frequency
+ */
+static uint32_t extosc_frequency(void) {
+ uint32_t MCGClock = SystemCoreClock * (1u + ((SIM->CLKDIV1 & SIM_CLKDIV1_OUTDIV1_MASK) >> SIM_CLKDIV1_OUTDIV1_SHIFT));
+
+ if ((MCG->C1 & MCG_C1_CLKS_MASK) == MCG_C1_CLKS(2)) //MCG clock = external reference clock
+ return MCGClock;
+
+ if ((MCG->C1 & MCG_C1_CLKS_MASK) == MCG_C1_CLKS(0)) { //PLL/FLL is selected
+ uint32_t divider, multiplier;
+ if ((MCG->C6 & MCG_C6_PLLS_MASK) == 0x0u) { //FLL is selected
+ if ((MCG->S & MCG_S_IREFST_MASK) == 0x0u) { //FLL uses external reference
+ divider = (uint8_t)(1u << ((MCG->C1 & MCG_C1_FRDIV_MASK) >> MCG_C1_FRDIV_SHIFT));
+ if ((MCG->C2 & MCG_C2_RANGE0_MASK) != 0x0u)
+ divider <<= 5u;
+ /* Select correct multiplier to calculate the MCG output clock */
+ switch (MCG->C4 & (MCG_C4_DMX32_MASK | MCG_C4_DRST_DRS_MASK)) {
+ case 0x0u:
+ multiplier = 640u;
+ break;
+ case 0x20u:
+ multiplier = 1280u;
+ break;
+ case 0x40u:
+ multiplier = 1920u;
+ break;
+ case 0x60u:
+ multiplier = 2560u;
+ break;
+ case 0x80u:
+ multiplier = 732u;
+ break;
+ case 0xA0u:
+ multiplier = 1464u;
+ break;
+ case 0xC0u:
+ multiplier = 2197u;
+ break;
+ case 0xE0u:
+ default:
+ multiplier = 2929u;
+ break;
+ }
+
+ return MCGClock * divider / multiplier;
+ }
+ } else { //PLL is selected
+ divider = (1u + (MCG->C5 & MCG_C5_PRDIV0_MASK));
+ multiplier = ((MCG->C6 & MCG_C6_VDIV0_MASK) + 24u);
+ return MCGClock * divider / multiplier;
+ }
+ }
+
+ //In all other cases either there is no crystal or we cannot determine it
+ //For example when the FLL is running on the internal reference, and there is also an
+ //external crystal. However these are unlikely situations
+ return 0;
+}
+
+//Get MCG PLL/2 or FLL frequency, depending on which one is active, sets PLLFLLSEL bit
+static uint32_t mcgpllfll_frequency(void) {
+ if ((MCG->C1 & MCG_C1_CLKS_MASK) != MCG_C1_CLKS(0)) //PLL/FLL is not selected
+ return 0;
+
+ uint32_t MCGClock = SystemCoreClock * (1u + ((SIM->CLKDIV1 & SIM_CLKDIV1_OUTDIV1_MASK) >> SIM_CLKDIV1_OUTDIV1_SHIFT));
+ if ((MCG->C6 & MCG_C6_PLLS_MASK) == 0x0u) { //FLL is selected
+ SIM->SOPT2 &= ~SIM_SOPT2_PLLFLLSEL_MASK; //MCG peripheral clock is FLL output
+ return MCGClock;
+ } else { //PLL is selected
+ SIM->SOPT2 |= SIM_SOPT2_PLLFLLSEL_MASK; //MCG peripheral clock is PLL output
+ return MCGClock;
+ }
+
+ //It is possible the SystemCoreClock isn't running on the PLL, and the PLL is still active
+ //for the peripherals, this is however an unlikely setup
+}
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_K20D50M/TARGET_Freescale/TARGET_K20XX/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_GPIO_OBJECT_H
+#define MBED_GPIO_OBJECT_H
+
+#include "mbed_assert.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ uint32_t mask;
+ __IO uint32_t *reg_dir;
+ __IO uint32_t *reg_set;
+ __IO uint32_t *reg_clr;
+ __I uint32_t *reg_in;
+} gpio_t;
+
+static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ if (value) {
+ *obj->reg_set = obj->mask;
+ } else {
+ *obj->reg_clr = obj->mask;
+ }
+}
+
+static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ return ((*obj->reg_in & obj->mask) ? 1 : 0);
+}
+
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_K20D50M/TARGET_Freescale/TARGET_K20XX/objects.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,77 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ uint32_t port;
+ uint32_t pin;
+ uint32_t ch;
+};
+
+struct port_s {
+ __IO uint32_t *reg_dir;
+ __IO uint32_t *reg_out;
+ __I uint32_t *reg_in;
+ PortName port;
+ uint32_t mask;
+};
+
+struct pwmout_s {
+ __IO uint32_t *MOD;
+ __IO uint32_t *CNT;
+ __IO uint32_t *CnV;
+};
+
+struct serial_s {
+ UART_Type *uart;
+ int index;
+};
+
+struct analogin_s {
+ ADCName adc;
+};
+
+#if DEVICE_ANALOGOUT
+struct dac_s {
+ DACName dac;
+};
+#endif
+
+struct i2c_s {
+ I2C_Type *i2c;
+};
+
+struct spi_s {
+ SPI_Type *spi;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
Binary file TARGET_K20D50M/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_K20D50M/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_K20D50M/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_K20D50M/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_K20D50M/TOOLCHAIN_ARM_STD/startup_MK20D5.o has changed
Binary file TARGET_K20D50M/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_K20D50M/TOOLCHAIN_ARM_STD/system_MK20D5.o has changed
Binary file TARGET_K20D50M/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_K20D50M/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_K20D50M/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_K20D50M/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_K20D50M/TOOLCHAIN_GCC_ARM/startup_MK20D5..o has changed
Binary file TARGET_K20D50M/TOOLCHAIN_GCC_ARM/startup_MK20D5.o has changed
Binary file TARGET_K20D50M/TOOLCHAIN_GCC_ARM/system_MK20D5.o has changed
--- a/TARGET_K20D50M/TOOLCHAIN_IAR/MK20D5.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_K20D50M/TOOLCHAIN_IAR/MK20D5.icf Tue Feb 03 15:31:20 2015 +0000
@@ -6,7 +6,9 @@
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0001ffff;
-define symbol __ICFEDIT_region_RAM_start__ = 0x1fffe000;
+define symbol __ICFEDIT_region_NVIC_start__ = 0x1fffe000;
+define symbol __ICFEDIT_region_NVIC_end__ = 0x1fffe0f7;
+define symbol __ICFEDIT_region_RAM_start__ = 0x1fffe0f8;
define symbol __ICFEDIT_region_RAM_end__ = 0x1fffffff;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
@@ -44,6 +46,6 @@
place in ROM_region { readonly };
-place in RAM_region { readwrite, block CSTACK, block HEAP };
+place in RAM_region { readwrite, block HEAP, block CSTACK };
place in FlexRAM_region { section .flex_ram };
Binary file TARGET_K20D50M/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_K20D50M/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_K20D50M/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_K20D50M/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_K20D50M/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_K20D50M/TOOLCHAIN_IAR/startup_MK20D5.o has changed
Binary file TARGET_K20D50M/TOOLCHAIN_IAR/system_MK20D5.o has changed
--- a/TARGET_K20D50M/cmsis.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_K20D50M/cmsis.h Tue Feb 03 15:31:20 2015 +0000 @@ -1,5 +1,5 @@ /* mbed Microcontroller Library - CMSIS - * Copyright (C) 2009-2011 ARM Limited. All rights reserved. + * Copyright (C) 2009-2015 ARM Limited. All rights reserved. * * A generic CMSIS include header, pulling in LPC11U24 specifics */
--- a/TARGET_K20D50M/cmsis_nvic.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_K20D50M/cmsis_nvic.h Tue Feb 03 15:31:20 2015 +0000 @@ -1,7 +1,7 @@ /* mbed Microcontroller Library * CMSIS-style functionality to support dynamic vectors ******************************************************************************* - * Copyright (c) 2011 ARM Limited. All rights reserved. + * Copyright (c) 2015 ARM Limited. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without
--- a/TARGET_K20D50M/system_MK20D5.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_K20D50M/system_MK20D5.h Tue Feb 03 15:31:20 2015 +0000 @@ -16,7 +16,7 @@ ** contains the system frequency. It configures the device and initializes ** the oscillator (PLL) that is part of the microcontroller device. ** -** Copyright: 2012 Freescale Semiconductor, Inc. All Rights Reserved. +** Copyright: 2015 Freescale Semiconductor, Inc. All Rights Reserved. ** ** http: www.freescale.com ** mail: support@freescale.com
--- a/TARGET_K22F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/hal/adc/fsl_adc_hal.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_K22F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/hal/adc/fsl_adc_hal.h Tue Feb 03 15:31:20 2015 +0000 @@ -891,7 +891,7 @@ #endif /* FSL_FEATURE_ADC_HAS_PGA */ #if defined(__cplusplus) -extern } +} #endif /*!
--- a/TARGET_K22F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/hal/dac/fsl_dac_hal.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_K22F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/hal/dac/fsl_dac_hal.h Tue Feb 03 15:31:20 2015 +0000 @@ -473,7 +473,7 @@ } #if defined(__cplusplus) -extern } +} #endif /*!
--- a/TARGET_K22F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/hal/pdb/fsl_pdb_hal.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_K22F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/hal/pdb/fsl_pdb_hal.h Tue Feb 03 15:31:20 2015 +0000 @@ -616,7 +616,7 @@ } #if defined(__cplusplus) -extern } +} #endif /*!
--- a/TARGET_K22F/TARGET_Freescale/TARGET_KPSDK_MCUS/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_K22F/TARGET_Freescale/TARGET_KPSDK_MCUS/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -25,27 +25,31 @@
#endif
typedef struct {
- PinName pinName;
+ PinName pin;
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value) {
- MBED_ASSERT(obj->pinName != (PinName)NC);
- uint32_t port = obj->pinName >> GPIO_PORT_SHIFT;
- uint32_t pin = obj->pinName & 0xFF;
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ uint32_t port = obj->pin >> GPIO_PORT_SHIFT;
+ uint32_t pin = obj->pin & 0xFF;
uint32_t gpio_addrs[] = GPIO_BASE_ADDRS;
GPIO_HAL_WritePinOutput(gpio_addrs[port], pin, value);
}
static inline int gpio_read(gpio_t *obj) {
- MBED_ASSERT(obj->pinName != (PinName)NC);
- uint32_t port = obj->pinName >> GPIO_PORT_SHIFT;
- uint32_t pin = obj->pinName & 0xFF;
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ uint32_t port = obj->pin >> GPIO_PORT_SHIFT;
+ uint32_t pin = obj->pin & 0xFF;
uint32_t gpio_addrs[] = GPIO_BASE_ADDRS;
return (int)GPIO_HAL_ReadPinInput(gpio_addrs[port], pin);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_K22F/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_K22F/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_K22F/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_K22F/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_K22F/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_K22F/TOOLCHAIN_ARM_STD/startup_MK22F12.o has changed
Binary file TARGET_K22F/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_K22F/TOOLCHAIN_ARM_STD/system_MK22F51212.o has changed
Binary file TARGET_K22F/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_K22F/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_K22F/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_K22F/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
Binary file TARGET_K22F/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_K22F/TOOLCHAIN_GCC_ARM/startup_MK22F12.o has changed
Binary file TARGET_K22F/TOOLCHAIN_GCC_ARM/system_MK22F51212.o has changed
--- a/TARGET_K22F/TOOLCHAIN_IAR/MK22F51212.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_K22F/TOOLCHAIN_IAR/MK22F51212.icf Tue Feb 03 15:31:20 2015 +0000
@@ -6,29 +6,24 @@
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0007ffff;
-define symbol __ICFEDIT_region_RAM_start__ = 0x1fff8000;
+define symbol __ICFEDIT_region_NVIC_start__ = 0x1fff0000;
+define symbol __ICFEDIT_region_NVIC_end__ = 0x1fff0197;
+define symbol __ICFEDIT_region_RAM_start__ = 0x1fff0198;
define symbol __ICFEDIT_region_RAM_end__ = 0x1fffffff;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x2000;
define symbol __ICFEDIT_size_heap__ = 0x4000;
/**** End of ICF editor section. ###ICF###*/
-define symbol __region_RAM2_start__ = 0x20000000;
-define symbol __region_RAM2_end__ = 0x20007fff;
-
-define symbol __FlashConfig_start__ = 0x00000400;
-define symbol __FlashConfig_end__ = 0x0000040f;
+define symbol __region_RAM2_start__ = 0x20000000;
+define symbol __region_RAM2_end__ = 0x2000ffff;
-define symbol __region_FlexNVM_start__ = 0x10000000;
-define symbol __region_FlexNVM_end__ = 0x1001ffff;
-
-define symbol __region_FlexRAM_start__ = 0x14000000;
-define symbol __region_FlexRAM_end__ = 0x14000fff;
+define symbol __FlashConfig_start__ = 0x00000400;
+define symbol __FlashConfig_end__ = 0x0000040f;
define memory mem with size = 4G;
-define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to (__FlashConfig_start__ - 1)] | mem:[from (__FlashConfig_end__+1) to __ICFEDIT_region_ROM_end__] | mem:[from __region_FlexNVM_start__ to __region_FlexNVM_end__];
-define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__] | mem:[from __region_RAM2_start__ to __region_RAM2_end__];
-define region FlexRAM_region = mem:[from __region_FlexRAM_start__ to __region_FlexRAM_end__];
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to (__FlashConfig_start__ - 1)] | mem:[from (__FlashConfig_end__+1) to __ICFEDIT_region_ROM_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__] | mem:[from __region_RAM2_start__ to __region_RAM2_end__];
define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
@@ -44,6 +39,4 @@
place in ROM_region { readonly };
-place in RAM_region { readwrite, block CSTACK, block HEAP };
-
-place in FlexRAM_region { section .flex_ram };
+place in RAM_region { readwrite, block HEAP, block CSTACK };
Binary file TARGET_K22F/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_K22F/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_K22F/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_K22F/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_K22F/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_K22F/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_K22F/TOOLCHAIN_IAR/startup_MK22F12.o has changed
Binary file TARGET_K22F/TOOLCHAIN_IAR/system_MK22F51212.o has changed
--- a/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/hal/adc/fsl_adc_hal.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/hal/adc/fsl_adc_hal.h Tue Feb 03 15:31:20 2015 +0000 @@ -891,7 +891,7 @@ #endif /* FSL_FEATURE_ADC_HAS_PGA */ #if defined(__cplusplus) -extern } +} #endif /*!
--- a/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/hal/dac/fsl_dac_hal.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/hal/dac/fsl_dac_hal.h Tue Feb 03 15:31:20 2015 +0000 @@ -473,7 +473,7 @@ } #if defined(__cplusplus) -extern } +} #endif /*!
--- a/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/hal/pdb/fsl_pdb_hal.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/hal/pdb/fsl_pdb_hal.h Tue Feb 03 15:31:20 2015 +0000 @@ -616,7 +616,7 @@ } #if defined(__cplusplus) -extern } +} #endif /*!
--- a/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -25,27 +25,31 @@
#endif
typedef struct {
- PinName pinName;
+ PinName pin;
} gpio_t;
static inline void gpio_write(gpio_t *obj, int value) {
- MBED_ASSERT(obj->pinName != (PinName)NC);
- uint32_t port = obj->pinName >> GPIO_PORT_SHIFT;
- uint32_t pin = obj->pinName & 0xFF;
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ uint32_t port = obj->pin >> GPIO_PORT_SHIFT;
+ uint32_t pin = obj->pin & 0xFF;
uint32_t gpio_addrs[] = GPIO_BASE_ADDRS;
GPIO_HAL_WritePinOutput(gpio_addrs[port], pin, value);
}
static inline int gpio_read(gpio_t *obj) {
- MBED_ASSERT(obj->pinName != (PinName)NC);
- uint32_t port = obj->pinName >> GPIO_PORT_SHIFT;
- uint32_t pin = obj->pinName & 0xFF;
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ uint32_t port = obj->pin >> GPIO_PORT_SHIFT;
+ uint32_t pin = obj->pin & 0xFF;
uint32_t gpio_addrs[] = GPIO_BASE_ADDRS;
return (int)GPIO_HAL_ReadPinInput(gpio_addrs[port], pin);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/startup_MK64F12.o has changed
Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_K64F/TOOLCHAIN_ARM_STD/system_MK64F12.o has changed
Binary file TARGET_K64F/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_K64F/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_K64F/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_K64F/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
Binary file TARGET_K64F/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_K64F/TOOLCHAIN_GCC_ARM/startup_MK64F12.o has changed
Binary file TARGET_K64F/TOOLCHAIN_GCC_ARM/system_MK64F12.o has changed
--- a/TARGET_K64F/TOOLCHAIN_IAR/MK64F.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_K64F/TOOLCHAIN_IAR/MK64F.icf Tue Feb 03 15:31:20 2015 +0000
@@ -6,7 +6,9 @@
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x000fffff;
-define symbol __ICFEDIT_region_RAM_start__ = 0x1fff0000;
+define symbol __ICFEDIT_region_NVIC_start__ = 0x1fff0000;
+define symbol __ICFEDIT_region_NVIC_end__ = 0x1fff0197;
+define symbol __ICFEDIT_region_RAM_start__ = 0x1fff0198;
define symbol __ICFEDIT_region_RAM_end__ = 0x1fffffff;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x2000;
@@ -41,6 +43,6 @@
place in ROM_region { readonly };
-place in RAM_region { readwrite, block CSTACK, block HEAP };
+place in RAM_region { readwrite, block HEAP, block CSTACK };
place in FlexRAM_region { section .flex_ram };
Binary file TARGET_K64F/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_K64F/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_K64F/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_K64F/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_K64F/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_K64F/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_K64F/TOOLCHAIN_IAR/startup_MK64F12.o has changed
Binary file TARGET_K64F/TOOLCHAIN_IAR/system_MK64F12.o has changed
--- a/TARGET_KL05Z/TARGET_Freescale/TARGET_KLXX/clk_freqs.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_KL05Z/TARGET_Freescale/TARGET_KLXX/clk_freqs.h Tue Feb 03 15:31:20 2015 +0000
@@ -33,6 +33,10 @@
return CPU_XTAL_CLK_HZ;
}
+static inline uint32_t fastirc_frequency(void) {
+ return CPU_INT_FAST_CLK_HZ;
+}
+
static inline uint32_t mcgirc_frequency(void) {
uint32_t mcgirc_clock = 0;
@@ -53,7 +57,7 @@
if ((MCG->C1 & MCG_C1_CLKS_MASK) == MCG_C1_CLKS(2)) //MCG clock = external reference clock
return MCGClock;
-
+
uint32_t divider, multiplier;
#ifdef MCG_C5_PLLCLKEN0_MASK //PLL available
if ((MCG->C1 & MCG_C1_CLKS_MASK) == MCG_C1_CLKS(0)) { //PLL/FLL is selected
@@ -91,18 +95,18 @@
multiplier = 2929u;
break;
}
-
+
return MCGClock * divider / multiplier;
}
#ifdef MCG_C5_PLLCLKEN0_MASK
} else { //PLL is selected
divider = (1u + (MCG->C5 & MCG_C5_PRDIV0_MASK));
- multiplier = ((MCG->C6 & MCG_C6_VDIV0_MASK) + 24u);
- return MCGClock * divider / multiplier;
+ multiplier = ((MCG->C6 & MCG_C6_VDIV0_MASK) + 24u);
+ return MCGClock * divider / multiplier;
}
}
#endif
-
+
//In all other cases either there is no crystal or we cannot determine it
//For example when the FLL is running on the internal reference, and there is also an
//external crystal. However these are unlikely situations
@@ -110,10 +114,10 @@
}
//Get MCG PLL/2 or FLL frequency, depending on which one is active, sets PLLFLLSEL bit
-static uint32_t mcgpllfll_frequency(void) {
+static uint32_t mcgpllfll_frequency(void) {
if ((MCG->C1 & MCG_C1_CLKS_MASK) != MCG_C1_CLKS(0)) //PLL/FLL is not selected
return 0;
-
+
uint32_t MCGClock = SystemCoreClock * (1u + ((SIM->CLKDIV1 & SIM_CLKDIV1_OUTDIV1_MASK) >> SIM_CLKDIV1_OUTDIV1_SHIFT));
#ifdef MCG_C5_PLLCLKEN0_MASK
if ((MCG->C6 & MCG_C6_PLLS_MASK) == 0x0u) { //FLL is selected
@@ -126,8 +130,8 @@
return (MCGClock >> 1);
}
#endif
-
- //It is possible the SystemCoreClock isn't running on the PLL, and the PLL is still active
+
+ //It is possible the SystemCoreClock isn't running on the PLL, and the PLL is still active
//for the peripherals, this is however an unlikely setup
}
--- a/TARGET_KL05Z/TARGET_Freescale/TARGET_KLXX/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_KL05Z/TARGET_Freescale/TARGET_KLXX/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -45,6 +45,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/startup_MKL05Z4.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_MICRO/system_MKL05Z4.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/startup_MKL05Z4.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_ARM_STD/system_MKL05Z4.o has changed
--- a/TARGET_KL05Z/TOOLCHAIN_GCC_ARM/MKL05Z4.ld Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_KL05Z/TOOLCHAIN_GCC_ARM/MKL05Z4.ld Tue Feb 03 15:31:20 2015 +0000
@@ -6,7 +6,7 @@
{
VECTORS (rx) : ORIGIN = 0x00000000, LENGTH = 0x00000410
FLASH (rx) : ORIGIN = 0x00000410, LENGTH = 32K - 0x00000410
- RAM (rwx) : ORIGIN = 0x1FFFFC00, LENGTH = 4K - 0xC0
+ RAM (rwx) : ORIGIN = 0x1FFFFCC0, LENGTH = 4K - 0xC0
}
/* Linker script to place sections and symbol values. Should be used together
Binary file TARGET_KL05Z/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_KL05Z/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_GCC_ARM/system_MKL05Z4.o has changed
--- a/TARGET_KL05Z/TOOLCHAIN_IAR/MKL05Z4.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_KL05Z/TOOLCHAIN_IAR/MKL05Z4.icf Tue Feb 03 15:31:20 2015 +0000
@@ -6,7 +6,9 @@
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x00007fff;
-define symbol __ICFEDIT_region_RAM_start__ = 0x1ffffc00;
+define symbol __ICFEDIT_region_NVIC_start__ = 0x1ffffc00;
+define symbol __ICFEDIT_region_NVIC_end__ = 0x1ffffcbf;
+define symbol __ICFEDIT_region_RAM_start__ = 0x1ffffcc0;
define symbol __ICFEDIT_region_RAM_end__ = 0x1fffffff;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x200;
@@ -37,4 +39,4 @@
place in ROM_region { readonly };
-place in RAM_region { readwrite, block CSTACK, block HEAP };
+place in RAM_region { readwrite, block HEAP, block CSTACK };
Binary file TARGET_KL05Z/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_KL05Z/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_IAR/startup_MKL05Z4.o has changed
Binary file TARGET_KL05Z/TOOLCHAIN_IAR/system_MKL05Z4.o has changed
--- a/TARGET_KL25Z/TARGET_Freescale/TARGET_KLXX/clk_freqs.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_KL25Z/TARGET_Freescale/TARGET_KLXX/clk_freqs.h Tue Feb 03 15:31:20 2015 +0000
@@ -33,6 +33,10 @@
return CPU_XTAL_CLK_HZ;
}
+static inline uint32_t fastirc_frequency(void) {
+ return CPU_INT_FAST_CLK_HZ;
+}
+
static inline uint32_t mcgirc_frequency(void) {
uint32_t mcgirc_clock = 0;
@@ -53,7 +57,7 @@
if ((MCG->C1 & MCG_C1_CLKS_MASK) == MCG_C1_CLKS(2)) //MCG clock = external reference clock
return MCGClock;
-
+
uint32_t divider, multiplier;
#ifdef MCG_C5_PLLCLKEN0_MASK //PLL available
if ((MCG->C1 & MCG_C1_CLKS_MASK) == MCG_C1_CLKS(0)) { //PLL/FLL is selected
@@ -91,18 +95,18 @@
multiplier = 2929u;
break;
}
-
+
return MCGClock * divider / multiplier;
}
#ifdef MCG_C5_PLLCLKEN0_MASK
} else { //PLL is selected
divider = (1u + (MCG->C5 & MCG_C5_PRDIV0_MASK));
- multiplier = ((MCG->C6 & MCG_C6_VDIV0_MASK) + 24u);
- return MCGClock * divider / multiplier;
+ multiplier = ((MCG->C6 & MCG_C6_VDIV0_MASK) + 24u);
+ return MCGClock * divider / multiplier;
}
}
#endif
-
+
//In all other cases either there is no crystal or we cannot determine it
//For example when the FLL is running on the internal reference, and there is also an
//external crystal. However these are unlikely situations
@@ -110,10 +114,10 @@
}
//Get MCG PLL/2 or FLL frequency, depending on which one is active, sets PLLFLLSEL bit
-static uint32_t mcgpllfll_frequency(void) {
+static uint32_t mcgpllfll_frequency(void) {
if ((MCG->C1 & MCG_C1_CLKS_MASK) != MCG_C1_CLKS(0)) //PLL/FLL is not selected
return 0;
-
+
uint32_t MCGClock = SystemCoreClock * (1u + ((SIM->CLKDIV1 & SIM_CLKDIV1_OUTDIV1_MASK) >> SIM_CLKDIV1_OUTDIV1_SHIFT));
#ifdef MCG_C5_PLLCLKEN0_MASK
if ((MCG->C6 & MCG_C6_PLLS_MASK) == 0x0u) { //FLL is selected
@@ -126,8 +130,8 @@
return (MCGClock >> 1);
}
#endif
-
- //It is possible the SystemCoreClock isn't running on the PLL, and the PLL is still active
+
+ //It is possible the SystemCoreClock isn't running on the PLL, and the PLL is still active
//for the peripherals, this is however an unlikely setup
}
--- a/TARGET_KL25Z/TARGET_Freescale/TARGET_KLXX/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_KL25Z/TARGET_Freescale/TARGET_KLXX/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -45,6 +45,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/startup_MKL25Z4.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_ARM_STD/system_MKL25Z4.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_KL25Z/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_GCC_ARM/system_MKL25Z4.o has changed
--- a/TARGET_KL25Z/TOOLCHAIN_IAR/MKL25Z4.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_KL25Z/TOOLCHAIN_IAR/MKL25Z4.icf Tue Feb 03 15:31:20 2015 +0000
@@ -6,11 +6,13 @@
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0001ffff;
-define symbol __ICFEDIT_region_RAM_start__ = 0x1ffff000;
+define symbol __ICFEDIT_region_NVIC_start__ = 0x1ffff000;
+define symbol __ICFEDIT_region_NVIC_end__ = 0x1ffff0bf;
+define symbol __ICFEDIT_region_RAM_start__ = 0x1ffff0c0;
define symbol __ICFEDIT_region_RAM_end__ = 0x1fffffff;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
-define symbol __ICFEDIT_size_heap__ = 0x800;
+define symbol __ICFEDIT_size_heap__ = 0xA00;
/**** End of ICF editor section. ###ICF###*/
define symbol __region_RAM2_start__ = 0x20000000;
@@ -37,4 +39,4 @@
place in ROM_region { readonly };
-place in RAM_region { readwrite, block CSTACK, block HEAP };
+place in RAM_region { readwrite, block HEAP, block CSTACK };
Binary file TARGET_KL25Z/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_KL25Z/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_IAR/startup_MKL25Z4.o has changed
Binary file TARGET_KL25Z/TOOLCHAIN_IAR/system_MKL25Z4.o has changed
--- a/TARGET_KL43Z/TARGET_Freescale/TARGET_KLXX/TARGET_KL43Z/PinNames.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_KL43Z/TARGET_Freescale/TARGET_KLXX/TARGET_KL43Z/PinNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -215,8 +215,8 @@
D3 = PTA12,
D4 = PTA4,
D5 = PTA5,
- D6 = PTC8,
- D7 = PTC9,
+ D6 = PTE29,
+ D7 = PTE30,
D8 = PTA13,
D9 = PTD2,
D10 = PTD4,
--- a/TARGET_KL43Z/TARGET_Freescale/TARGET_KLXX/clk_freqs.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_KL43Z/TARGET_Freescale/TARGET_KLXX/clk_freqs.h Tue Feb 03 15:31:20 2015 +0000
@@ -33,6 +33,10 @@
return CPU_XTAL_CLK_HZ;
}
+static inline uint32_t fastirc_frequency(void) {
+ return CPU_INT_FAST_CLK_HZ;
+}
+
static inline uint32_t mcgirc_frequency(void) {
uint32_t mcgirc_clock = 0;
@@ -53,7 +57,7 @@
if ((MCG->C1 & MCG_C1_CLKS_MASK) == MCG_C1_CLKS(2)) //MCG clock = external reference clock
return MCGClock;
-
+
uint32_t divider, multiplier;
#ifdef MCG_C5_PLLCLKEN0_MASK //PLL available
if ((MCG->C1 & MCG_C1_CLKS_MASK) == MCG_C1_CLKS(0)) { //PLL/FLL is selected
@@ -91,18 +95,18 @@
multiplier = 2929u;
break;
}
-
+
return MCGClock * divider / multiplier;
}
#ifdef MCG_C5_PLLCLKEN0_MASK
} else { //PLL is selected
divider = (1u + (MCG->C5 & MCG_C5_PRDIV0_MASK));
- multiplier = ((MCG->C6 & MCG_C6_VDIV0_MASK) + 24u);
- return MCGClock * divider / multiplier;
+ multiplier = ((MCG->C6 & MCG_C6_VDIV0_MASK) + 24u);
+ return MCGClock * divider / multiplier;
}
}
#endif
-
+
//In all other cases either there is no crystal or we cannot determine it
//For example when the FLL is running on the internal reference, and there is also an
//external crystal. However these are unlikely situations
@@ -110,10 +114,10 @@
}
//Get MCG PLL/2 or FLL frequency, depending on which one is active, sets PLLFLLSEL bit
-static uint32_t mcgpllfll_frequency(void) {
+static uint32_t mcgpllfll_frequency(void) {
if ((MCG->C1 & MCG_C1_CLKS_MASK) != MCG_C1_CLKS(0)) //PLL/FLL is not selected
return 0;
-
+
uint32_t MCGClock = SystemCoreClock * (1u + ((SIM->CLKDIV1 & SIM_CLKDIV1_OUTDIV1_MASK) >> SIM_CLKDIV1_OUTDIV1_SHIFT));
#ifdef MCG_C5_PLLCLKEN0_MASK
if ((MCG->C6 & MCG_C6_PLLS_MASK) == 0x0u) { //FLL is selected
@@ -126,8 +130,8 @@
return (MCGClock >> 1);
}
#endif
-
- //It is possible the SystemCoreClock isn't running on the PLL, and the PLL is still active
+
+ //It is possible the SystemCoreClock isn't running on the PLL, and the PLL is still active
//for the peripherals, this is however an unlikely setup
}
--- a/TARGET_KL43Z/TARGET_Freescale/TARGET_KLXX/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_KL43Z/TARGET_Freescale/TARGET_KLXX/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -45,6 +45,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_KL43Z/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_KL43Z/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_KL43Z/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_KL43Z/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_KL43Z/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_KL43Z/TOOLCHAIN_ARM_STD/startup_MKL43Z4.o has changed
Binary file TARGET_KL43Z/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_KL43Z/TOOLCHAIN_ARM_STD/system_MKL43Z4.o has changed
Binary file TARGET_KL43Z/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_KL43Z/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_KL43Z/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_KL43Z/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
Binary file TARGET_KL43Z/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_KL43Z/TOOLCHAIN_GCC_ARM/sys.o has changed
Binary file TARGET_KL43Z/TOOLCHAIN_GCC_ARM/system_MKL43Z4.o has changed
--- a/TARGET_KL46Z/TARGET_Freescale/TARGET_KLXX/clk_freqs.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_KL46Z/TARGET_Freescale/TARGET_KLXX/clk_freqs.h Tue Feb 03 15:31:20 2015 +0000
@@ -33,6 +33,10 @@
return CPU_XTAL_CLK_HZ;
}
+static inline uint32_t fastirc_frequency(void) {
+ return CPU_INT_FAST_CLK_HZ;
+}
+
static inline uint32_t mcgirc_frequency(void) {
uint32_t mcgirc_clock = 0;
@@ -53,7 +57,7 @@
if ((MCG->C1 & MCG_C1_CLKS_MASK) == MCG_C1_CLKS(2)) //MCG clock = external reference clock
return MCGClock;
-
+
uint32_t divider, multiplier;
#ifdef MCG_C5_PLLCLKEN0_MASK //PLL available
if ((MCG->C1 & MCG_C1_CLKS_MASK) == MCG_C1_CLKS(0)) { //PLL/FLL is selected
@@ -91,18 +95,18 @@
multiplier = 2929u;
break;
}
-
+
return MCGClock * divider / multiplier;
}
#ifdef MCG_C5_PLLCLKEN0_MASK
} else { //PLL is selected
divider = (1u + (MCG->C5 & MCG_C5_PRDIV0_MASK));
- multiplier = ((MCG->C6 & MCG_C6_VDIV0_MASK) + 24u);
- return MCGClock * divider / multiplier;
+ multiplier = ((MCG->C6 & MCG_C6_VDIV0_MASK) + 24u);
+ return MCGClock * divider / multiplier;
}
}
#endif
-
+
//In all other cases either there is no crystal or we cannot determine it
//For example when the FLL is running on the internal reference, and there is also an
//external crystal. However these are unlikely situations
@@ -110,10 +114,10 @@
}
//Get MCG PLL/2 or FLL frequency, depending on which one is active, sets PLLFLLSEL bit
-static uint32_t mcgpllfll_frequency(void) {
+static uint32_t mcgpllfll_frequency(void) {
if ((MCG->C1 & MCG_C1_CLKS_MASK) != MCG_C1_CLKS(0)) //PLL/FLL is not selected
return 0;
-
+
uint32_t MCGClock = SystemCoreClock * (1u + ((SIM->CLKDIV1 & SIM_CLKDIV1_OUTDIV1_MASK) >> SIM_CLKDIV1_OUTDIV1_SHIFT));
#ifdef MCG_C5_PLLCLKEN0_MASK
if ((MCG->C6 & MCG_C6_PLLS_MASK) == 0x0u) { //FLL is selected
@@ -126,8 +130,8 @@
return (MCGClock >> 1);
}
#endif
-
- //It is possible the SystemCoreClock isn't running on the PLL, and the PLL is still active
+
+ //It is possible the SystemCoreClock isn't running on the PLL, and the PLL is still active
//for the peripherals, this is however an unlikely setup
}
--- a/TARGET_KL46Z/TARGET_Freescale/TARGET_KLXX/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_KL46Z/TARGET_Freescale/TARGET_KLXX/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -45,6 +45,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/startup_MKL46Z4.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_ARM_STD/system_MKL46Z4.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_KL46Z/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_GCC_ARM/system_MKL46Z4.o has changed
--- a/TARGET_KL46Z/TOOLCHAIN_IAR/MKL46Z4.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_KL46Z/TOOLCHAIN_IAR/MKL46Z4.icf Tue Feb 03 15:31:20 2015 +0000
@@ -6,7 +6,9 @@
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0002ffff;
-define symbol __ICFEDIT_region_RAM_start__ = 0x1fffe000;
+define symbol __ICFEDIT_region_NVIC_start__ = 0x1fffe000;
+define symbol __ICFEDIT_region_NVIC_end__ = 0x1fffe0bf;
+define symbol __ICFEDIT_region_RAM_start__ = 0x1fffe0c0;
define symbol __ICFEDIT_region_RAM_end__ = 0x1fffffff;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x800;
@@ -37,4 +39,4 @@
place in ROM_region { readonly };
-place in RAM_region { readwrite, block CSTACK, block HEAP };
+place in RAM_region { readwrite, block HEAP, block CSTACK };
Binary file TARGET_KL46Z/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_KL46Z/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_IAR/startup_MKL46Z4.o has changed
Binary file TARGET_KL46Z/TOOLCHAIN_IAR/system_MKL46Z4.o has changed
--- a/TARGET_LPC1114/TARGET_NXP/TARGET_LPC11XX_11CXX/TARGET_LPC11XX/PinNames.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_LPC1114/TARGET_NXP/TARGET_LPC11XX_11CXX/TARGET_LPC11XX/PinNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -78,7 +78,7 @@
P3_5 = (3 << PORT_SHIFT) | (5 << PIN_SHIFT) | 0x48,
// mbed DIP Pin Names (CQ board)
- p4 = P0_0,
+// p4 = P0_0,
p5 = P0_9,
p6 = P0_8,
p7 = P0_6,
@@ -114,7 +114,7 @@
USBRX = P1_6,
// mbed DIP Pin Names (LPCXpresso LPC1114)
- xp4 = P0_0,
+// xp4 = P0_0,
xp5 = P0_9,
xp6 = P0_8,
xp7 = P2_11,
@@ -173,7 +173,7 @@
dp16 = P1_7,
dp17 = P1_8,
dp18 = P1_9,
- dp23 = P0_0,
+// dp23 = P0_0,
dp24 = P0_1,
dp25 = P0_2,
dp26 = P0_3,
@@ -194,7 +194,7 @@
dip16 = P1_7,
dip17 = P1_8,
dip18 = P1_9,
- dip23 = P0_0,
+// dip23 = P0_0,
dip24 = P0_1,
dip25 = P0_2,
dip26 = P0_3,
--- a/TARGET_LPC1114/TARGET_NXP/TARGET_LPC11XX_11CXX/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_LPC1114/TARGET_NXP/TARGET_LPC11XX_11CXX/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -43,6 +43,10 @@
return ((*obj->reg_mask_read) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_LPC1114/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_LPC1114/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_ARM_MICRO/startup_LPC11xx.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_ARM_MICRO/system_LPC11xx.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC1114/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_GCC_ARM/system_LPC11xx.o has changed
--- a/TARGET_LPC1114/TOOLCHAIN_IAR/LPC1114.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_LPC1114/TOOLCHAIN_IAR/LPC1114.icf Tue Feb 03 15:31:20 2015 +0000
@@ -6,7 +6,9 @@
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x00007FFF;
-define symbol __ICFEDIT_region_RAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_NVIC_start__ = 0x10000000;
+define symbol __ICFEDIT_region_NVIC_end__ = 0x100000BF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x100000C0;
define symbol __ICFEDIT_region_RAM_end__ = 0x10000FDF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
@@ -30,5 +32,5 @@
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
- block CSTACK, block HEAP };
+ block HEAP, block CSTACK };
place in CRP_region { section .crp };
Binary file TARGET_LPC1114/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_LPC1114/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_IAR/startup_LPC11xx.o has changed
Binary file TARGET_LPC1114/TOOLCHAIN_IAR/system_LPC11xx.o has changed
--- a/TARGET_LPC11U24/TARGET_NXP/TARGET_LPC11UXX/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_LPC11U24/TARGET_NXP/TARGET_LPC11UXX/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -45,6 +45,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_MICRO/startup_LPC11xx.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_MICRO/system_LPC11Uxx.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_STD/startup_LPC11xx.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_ARM_STD/system_LPC11Uxx.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_GCC_ARM/system_LPC11Uxx.o has changed
--- a/TARGET_LPC11U24/TOOLCHAIN_IAR/LPC11U24.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_LPC11U24/TOOLCHAIN_IAR/LPC11U24.icf Tue Feb 03 15:31:20 2015 +0000
@@ -6,11 +6,13 @@
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x00007FFF;
-define symbol __ICFEDIT_region_RAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_NVIC_start__ = 0x10000000;
+define symbol __ICFEDIT_region_NVIC_end__ = 0x100000BF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x100000C0;
define symbol __ICFEDIT_region_RAM_end__ = 0x10001FDF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
-define symbol __ICFEDIT_size_heap__ = 0x800;
+define symbol __ICFEDIT_size_heap__ = 0xA00;
/**** End of ICF editor section. ###ICF###*/
define symbol __CRP_start__ = 0x000002FC;
@@ -34,6 +36,6 @@
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
- block CSTACK, block HEAP };
+ block HEAP, block CSTACK };
place in CRP_region { section .crp };
place in URAM_region { section USB_PACKET_MEMORY };
Binary file TARGET_LPC11U24/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_IAR/startup_LPC11xx.o has changed
Binary file TARGET_LPC11U24/TOOLCHAIN_IAR/system_LPC11Uxx.o has changed
--- a/TARGET_LPC11U35_401/TARGET_NXP/TARGET_LPC11UXX/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_LPC11U35_401/TARGET_NXP/TARGET_LPC11UXX/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -45,6 +45,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_MICRO/startup_LPC11xx.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_MICRO/system_LPC11Uxx.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_STD/startup_LPC11xx.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_ARM_STD/system_LPC11Uxx.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_GCC_ARM/system_LPC11Uxx.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_GCC_CR/board.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_GCC_CR/cmsis_nvic.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_GCC_CR/retarget.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_GCC_CR/startup_LPC11xx.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_GCC_CR/system_LPC11Uxx.o has changed
--- a/TARGET_LPC11U35_401/TOOLCHAIN_IAR/LPC11U35.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_LPC11U35_401/TOOLCHAIN_IAR/LPC11U35.icf Tue Feb 03 15:31:20 2015 +0000
@@ -6,7 +6,9 @@
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x000000C0;
define symbol __ICFEDIT_region_ROM_end__ = 0x0000FFFF;
-define symbol __ICFEDIT_region_RAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_NVIC_start__ = 0x10000000;
+define symbol __ICFEDIT_region_NVIC_end__ = 0x100000BF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x100000C0;
define symbol __ICFEDIT_region_RAM_end__ = 0x10001FDF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
@@ -34,6 +36,6 @@
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
- block CSTACK, block HEAP };
+ block HEAP, block CSTACK };
place in CRP_region { section .crp };
place in URAM_region { section USB_PACKET_MEMORY };
Binary file TARGET_LPC11U35_401/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_IAR/startup_LPC11xx.o has changed
Binary file TARGET_LPC11U35_401/TOOLCHAIN_IAR/system_LPC11Uxx.o has changed
--- a/TARGET_LPC11U35_501/TARGET_NXP/TARGET_LPC11UXX/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_LPC11U35_501/TARGET_NXP/TARGET_LPC11UXX/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -45,6 +45,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_MICRO/startup_LPC11xx.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_MICRO/system_LPC11Uxx.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_STD/startup_LPC11xx.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_ARM_STD/system_LPC11Uxx.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_GCC_ARM/system_LPC11Uxx.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_GCC_CR/board.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_GCC_CR/cmsis_nvic.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_GCC_CR/retarget.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_GCC_CR/startup_LPC11xx.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_GCC_CR/system_LPC11Uxx.o has changed
--- a/TARGET_LPC11U35_501/TOOLCHAIN_IAR/LPC11U35.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_LPC11U35_501/TOOLCHAIN_IAR/LPC11U35.icf Tue Feb 03 15:31:20 2015 +0000
@@ -6,7 +6,9 @@
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x000000C0;
define symbol __ICFEDIT_region_ROM_end__ = 0x0000FFFF;
-define symbol __ICFEDIT_region_RAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_NVIC_start__ = 0x10000000;
+define symbol __ICFEDIT_region_NVIC_end__ = 0x100000BF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x100000C0;
define symbol __ICFEDIT_region_RAM_end__ = 0x10001FDF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
@@ -38,7 +40,7 @@
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
- block CSTACK, block HEAP };
+ block HEAP, block CSTACK };
place in CRP_region { section .crp };
place in URAM_region { section USB_PACKET_MEMORY };
place in SRAM1_region { section .SRAM1 };
Binary file TARGET_LPC11U35_501/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_IAR/startup_LPC11xx.o has changed
Binary file TARGET_LPC11U35_501/TOOLCHAIN_IAR/system_LPC11Uxx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC11U37H_401/LPC11Uxx.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,670 @@
+
+/****************************************************************************************************//**
+ * @file LPC11Uxx.h
+ *
+ *
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File for
+ * default LPC11Uxx Device Series
+ *
+ * @version V0.1
+ * @date 21. March 2011
+ *
+ * @note Generated with SFDGen V2.6 Build 3j (beta) on Thursday, 17.03.2011 13:19:45
+ *
+ * from CMSIS SVD File 'LPC11U1x_svd.xml' Version 0.1,
+ * created on Wednesday, 16.03.2011 20:30:42, last modified on Thursday, 17.03.2011 20:19:40
+ *
+ *******************************************************************************************************/
+
+// ################################################################################
+// Minor fix 8 April 2011 - changed LPC_CT32B1_BASE from 0x40014000 to 0x40018000
+// ################################################################################
+
+/** @addtogroup NXP
+ * @{
+ */
+
+/** @addtogroup LPC11Uxx
+ * @{
+ */
+
+#ifndef __LPC11UXX_H__
+#define __LPC11UXX_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+#if defined ( __CC_ARM )
+ #pragma anon_unions
+#endif
+
+ /* Interrupt Number Definition */
+
+typedef enum {
+// ------------------------- Cortex-M0 Processor Exceptions Numbers -----------------------------
+ Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset */
+ NonMaskableInt_IRQn = -14, /*!< 2 Non maskable Interrupt, cannot be stopped or preempted */
+ HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */
+ SVCall_IRQn = -5, /*!< 11 System Service Call via SVC instruction */
+ DebugMonitor_IRQn = -4, /*!< 12 Debug Monitor */
+ PendSV_IRQn = -2, /*!< 14 Pendable request for system service */
+ SysTick_IRQn = -1, /*!< 15 System Tick Timer */
+// --------------------------- LPC11Uxx Specific Interrupt Numbers ------------------------------
+FLEX_INT0_IRQn = 0, /*!< All I/O pins can be routed to below 8 interrupts. */
+ FLEX_INT1_IRQn = 1,
+ FLEX_INT2_IRQn = 2,
+ FLEX_INT3_IRQn = 3,
+ FLEX_INT4_IRQn = 4,
+ FLEX_INT5_IRQn = 5,
+ FLEX_INT6_IRQn = 6,
+ FLEX_INT7_IRQn = 7,
+ GINT0_IRQn = 8, /*!< Grouped Interrupt 0 */
+ GINT1_IRQn = 9, /*!< Grouped Interrupt 1 */
+ Reserved0_IRQn = 10, /*!< Reserved Interrupt */
+ Reserved1_IRQn = 11,
+ Reserved2_IRQn = 12,
+ Reserved3_IRQn = 13,
+ SSP1_IRQn = 14, /*!< SSP1 Interrupt */
+ I2C_IRQn = 15, /*!< I2C Interrupt */
+ TIMER_16_0_IRQn = 16, /*!< 16-bit Timer0 Interrupt */
+ TIMER_16_1_IRQn = 17, /*!< 16-bit Timer1 Interrupt */
+ TIMER_32_0_IRQn = 18, /*!< 32-bit Timer0 Interrupt */
+ TIMER_32_1_IRQn = 19, /*!< 32-bit Timer1 Interrupt */
+ SSP0_IRQn = 20, /*!< SSP0 Interrupt */
+ UART_IRQn = 21, /*!< UART Interrupt */
+ USB_IRQn = 22, /*!< USB IRQ Interrupt */
+ USB_FIQn = 23, /*!< USB FIQ Interrupt */
+ ADC_IRQn = 24, /*!< A/D Converter Interrupt */
+ WDT_IRQn = 25, /*!< Watchdog timer Interrupt */
+ BOD_IRQn = 26, /*!< Brown Out Detect(BOD) Interrupt */
+ FMC_IRQn = 27, /*!< Flash Memory Controller Interrupt */
+ Reserved4_IRQn = 28, /*!< Reserved Interrupt */
+ Reserved5_IRQn = 29, /*!< Reserved Interrupt */
+ USBWakeup_IRQn = 30, /*!< USB wakeup Interrupt */
+ Reserved6_IRQn = 31, /*!< Reserved Interrupt */
+} IRQn_Type;
+
+
+/** @addtogroup Configuration_of_CMSIS
+ * @{
+ */
+
+/* Processor and Core Peripheral Section */ /* Configuration of the Cortex-M0 Processor and Core Peripherals */
+
+#define __MPU_PRESENT 0 /*!< MPU present or not */
+#define __NVIC_PRIO_BITS 3 /*!< Number of Bits used for Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+/** @} */ /* End of group Configuration_of_CMSIS */
+
+#include "core_cm0.h" /*!< Cortex-M0 processor and core peripherals */
+#include "system_LPC11Uxx.h" /*!< LPC11Uxx System */
+
+/** @addtogroup Device_Peripheral_Registers
+ * @{
+ */
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- I2C -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x I2C-bus controller Modification date=3/16/2011 Major revision=0 Minor revision=3 (I2C)
+ */
+
+typedef struct { /*!< (@ 0x40000000) I2C Structure */
+ __IO uint32_t CONSET; /*!< (@ 0x40000000) I2C Control Set Register */
+ __I uint32_t STAT; /*!< (@ 0x40000004) I2C Status Register */
+ __IO uint32_t DAT; /*!< (@ 0x40000008) I2C Data Register. */
+ __IO uint32_t ADR0; /*!< (@ 0x4000000C) I2C Slave Address Register 0 */
+ __IO uint32_t SCLH; /*!< (@ 0x40000010) SCH Duty Cycle Register High Half Word */
+ __IO uint32_t SCLL; /*!< (@ 0x40000014) SCL Duty Cycle Register Low Half Word */
+ __IO uint32_t CONCLR; /*!< (@ 0x40000018) I2C Control Clear Register*/
+ __IO uint32_t MMCTRL; /*!< (@ 0x4000001C) Monitor mode control register*/
+ __IO uint32_t ADR1; /*!< (@ 0x40000020) I2C Slave Address Register 1*/
+ __IO uint32_t ADR2; /*!< (@ 0x40000024) I2C Slave Address Register 2*/
+ __IO uint32_t ADR3; /*!< (@ 0x40000028) I2C Slave Address Register 3*/
+ __I uint32_t DATA_BUFFER; /*!< (@ 0x4000002C) Data buffer register */
+union{
+ __IO uint32_t MASK[4]; /*!< (@ 0x40000030) I2C Slave address mask register */
+ struct{
+ __IO uint32_t MASK0;
+ __IO uint32_t MASK1;
+ __IO uint32_t MASK2;
+ __IO uint32_t MASK3;
+ };
+ };
+} LPC_I2C_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- WWDT -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x Windowed Watchdog Timer (WWDT) Modification date=3/16/2011 Major revision=0 Minor revision=3 (WWDT)
+ */
+
+typedef struct { /*!< (@ 0x40004000) WWDT Structure */
+ __IO uint32_t MOD; /*!< (@ 0x40004000) Watchdog mode register*/
+ __IO uint32_t TC; /*!< (@ 0x40004004) Watchdog timer constant register */
+ __IO uint32_t FEED; /*!< (@ 0x40004008) Watchdog feed sequence register */
+ __I uint32_t TV; /*!< (@ 0x4000400C) Watchdog timer value register */
+ __IO uint32_t CLKSEL; /*!< (@ 0x40004010) Watchdog clock select register. */
+ __IO uint32_t WARNINT; /*!< (@ 0x40004014) Watchdog Warning Interrupt compare value. */
+ __IO uint32_t WINDOW; /*!< (@ 0x40004018) Watchdog Window compare value. */
+} LPC_WWDT_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- USART -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x USART Modification date=3/16/2011 Major revision=0 Minor revision=3 (USART)
+ */
+
+typedef struct { /*!< (@ 0x40008000) USART Structure */
+
+ union {
+ __IO uint32_t DLL; /*!< (@ 0x40008000) Divisor Latch LSB. Least significant byte of the baud rate divisor value. The full divisor is used to generate a baud rate from the fractional rate divider. (DLAB=1) */
+ __O uint32_t THR; /*!< (@ 0x40008000) Transmit Holding Register. The next character to be transmitted is written here. (DLAB=0) */
+ __I uint32_t RBR; /*!< (@ 0x40008000) Receiver Buffer Register. Contains the next received character to be read. (DLAB=0) */
+ };
+
+ union {
+ __IO uint32_t IER; /*!< (@ 0x40008004) Interrupt Enable Register. Contains individual interrupt enable bits for the 7 potential USART interrupts. (DLAB=0) */
+ __IO uint32_t DLM; /*!< (@ 0x40008004) Divisor Latch MSB. Most significant byte of the baud rate divisor value. The full divisor is used to generate a baud rate from the fractional rate divider. (DLAB=1) */
+ };
+
+ union {
+ __O uint32_t FCR; /*!< (@ 0x40008008) FIFO Control Register. Controls USART FIFO usage and modes. */
+ __I uint32_t IIR; /*!< (@ 0x40008008) Interrupt ID Register. Identifies which interrupt(s) are pending. */
+ };
+ __IO uint32_t LCR; /*!< (@ 0x4000800C) Line Control Register. Contains controls for frame formatting and break generation. */
+ __IO uint32_t MCR; /*!< (@ 0x40008010) Modem Control Register. */
+ __I uint32_t LSR; /*!< (@ 0x40008014) Line Status Register. Contains flags for transmit and receive status, including line errors. */
+ __I uint32_t MSR; /*!< (@ 0x40008018) Modem Status Register. */
+ __IO uint32_t SCR; /*!< (@ 0x4000801C) Scratch Pad Register. Eight-bit temporary storage for software. */
+ __IO uint32_t ACR; /*!< (@ 0x40008020) Auto-baud Control Register. Contains controls for the auto-baud feature. */
+ __IO uint32_t ICR; /*!< (@ 0x40008024) IrDA Control Register. Enables and configures the IrDA (remote control) mode. */
+ __IO uint32_t FDR; /*!< (@ 0x40008028) Fractional Divider Register. Generates a clock input for the baud rate divider. */
+ __IO uint32_t OSR; /*!< (@ 0x4000802C) Oversampling Register. Controls the degree of oversampling during each bit time. */
+ __IO uint32_t TER; /*!< (@ 0x40008030) Transmit Enable Register. Turns off USART transmitter for use with software flow control. */
+ __I uint32_t RESERVED0[3];
+ __IO uint32_t HDEN; /*!< (@ 0x40008040) Half duplex enable register. */
+ __I uint32_t RESERVED1;
+ __IO uint32_t SCICTRL; /*!< (@ 0x40008048) Smart Card Interface Control register. Enables and configures the Smart Card Interface feature. */
+ __IO uint32_t RS485CTRL; /*!< (@ 0x4000804C) RS-485/EIA-485 Control. Contains controls to configure various aspects of RS-485/EIA-485 modes. */
+ __IO uint32_t RS485ADRMATCH; /*!< (@ 0x40008050) RS-485/EIA-485 address match. Contains the address match value for RS-485/EIA-485 mode. */
+ __IO uint32_t RS485DLY; /*!< (@ 0x40008054) RS-485/EIA-485 direction control delay. */
+ __IO uint32_t SYNCCTRL;
+} LPC_USART_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- Timer -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x 32-bitcounter/timers CT32B0/1 Modification date=3/16/2011 Major revision=0 Minor revision=3
+ */
+
+typedef struct { /*!< (@ 0x40014000) CT32B0 Structure */
+ __IO uint32_t IR; /*!< (@ 0x40014000) Interrupt Register */
+ __IO uint32_t TCR; /*!< (@ 0x40014004) Timer Control Register */
+ __IO uint32_t TC; /*!< (@ 0x40014008) Timer Counter */
+ __IO uint32_t PR; /*!< (@ 0x4001400C) Prescale Register */
+ __IO uint32_t PC; /*!< (@ 0x40014010) Prescale Counter */
+ __IO uint32_t MCR; /*!< (@ 0x40014014) Match Control Register */
+ union {
+ __IO uint32_t MR[4]; /*!< (@ 0x40014018) Match Register */
+ struct{
+ __IO uint32_t MR0; /*!< (@ 0x40018018) Match Register. MR0 */
+ __IO uint32_t MR1; /*!< (@ 0x4001801C) Match Register. MR1 */
+ __IO uint32_t MR2; /*!< (@ 0x40018020) Match Register. MR2 */
+ __IO uint32_t MR3; /*!< (@ 0x40018024) Match Register. MR3 */
+ };
+ };
+ __IO uint32_t CCR; /*!< (@ 0x40014028) Capture Control Register */
+ union{
+ __I uint32_t CR[4]; /*!< (@ 0x4001402C) Capture Register */
+ struct{
+ __I uint32_t CR0; /*!< (@ 0x4001802C) Capture Register. CR 0 */
+ __I uint32_t CR1; /*!< (@ 0x40018030) Capture Register. CR 1 */
+ __I uint32_t CR2; /*!< (@ 0x40018034) Capture Register. CR 2 */
+ __I uint32_t CR3; /*!< (@ 0x40018038) Capture Register. CR 3 */
+ };
+ };
+__IO uint32_t EMR; /*!< (@ 0x4001403C) External Match Register */
+ __I uint32_t RESERVED0[12];
+ __IO uint32_t CTCR; /*!< (@ 0x40014070) Count Control Register */
+ __IO uint32_t PWMC; /*!< (@ 0x40014074) PWM Control Register */
+} LPC_CTxxBx_Type;
+
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- ADC -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x ADC Modification date=3/16/2011 Major revision=0 Minor revision=3 (ADC)
+ */
+
+typedef struct { /*!< (@ 0x4001C000) ADC Structure */
+ __IO uint32_t CR; /*!< (@ 0x4001C000) A/D Control Register */
+ __IO uint32_t GDR; /*!< (@ 0x4001C004) A/D Global Data Register */
+ __I uint32_t RESERVED0[1];
+ __IO uint32_t INTEN; /*!< (@ 0x4001C00C) A/D Interrupt Enable Register */
+ union{
+ __I uint32_t DR[8]; /*!< (@ 0x4001C010) A/D Channel Data Register*/
+ struct{
+ __IO uint32_t DR0; /*!< (@ 0x40020010) A/D Channel Data Register 0*/
+ __IO uint32_t DR1; /*!< (@ 0x40020014) A/D Channel Data Register 1*/
+ __IO uint32_t DR2; /*!< (@ 0x40020018) A/D Channel Data Register 2*/
+ __IO uint32_t DR3; /*!< (@ 0x4002001C) A/D Channel Data Register 3*/
+ __IO uint32_t DR4; /*!< (@ 0x40020020) A/D Channel Data Register 4*/
+ __IO uint32_t DR5; /*!< (@ 0x40020024) A/D Channel Data Register 5*/
+ __IO uint32_t DR6; /*!< (@ 0x40020028) A/D Channel Data Register 6*/
+ __IO uint32_t DR7; /*!< (@ 0x4002002C) A/D Channel Data Register 7*/
+ };
+ };
+ __I uint32_t STAT; /*!< (@ 0x4001C030) A/D Status Register. */
+} LPC_ADC_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- PMU -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x Power Management Unit (PMU) Modification date=3/16/2011 Major revision=0 Minor revision=3 (PMU)
+ */
+
+typedef struct { /*!< (@ 0x40038000) PMU Structure */
+ __IO uint32_t PCON; /*!< (@ 0x40038000) Power control register */
+ union{
+ __IO uint32_t GPREG[4]; /*!< (@ 0x40038004) General purpose register 0 */
+ struct{
+ __IO uint32_t GPREG0; /*!< (@ 0x40038004) General purpose register 0 */
+ __IO uint32_t GPREG1; /*!< (@ 0x40038008) General purpose register 1 */
+ __IO uint32_t GPREG2; /*!< (@ 0x4003800C) General purpose register 2 */
+ __IO uint32_t GPREG3; /*!< (@ 0x40038010) General purpose register 3 */
+ };
+ };
+} LPC_PMU_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- FLASHCTRL -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x Flash programming firmware Modification date=3/17/2011 Major revision=0 Minor revision=3 (FLASHCTRL)
+ */
+
+typedef struct { /*!< (@ 0x4003C000) FLASHCTRL Structure */
+ __I uint32_t RESERVED0[4];
+ __IO uint32_t FLASHCFG; /*!< (@ 0x4003C010) Flash memory access time configuration register */
+ __I uint32_t RESERVED1[3];
+ __IO uint32_t FMSSTART; /*!< (@ 0x4003C020) Signature start address register */
+ __IO uint32_t FMSSTOP; /*!< (@ 0x4003C024) Signature stop-address register */
+ __I uint32_t RESERVED2[1];
+ __I uint32_t FMSW0; /*!< (@ 0x4003C02C) Word 0 [31:0] */
+ __I uint32_t FMSW1; /*!< (@ 0x4003C030) Word 1 [63:32] */
+ __I uint32_t FMSW2; /*!< (@ 0x4003C034) Word 2 [95:64] */
+ __I uint32_t FMSW3; /*!< (@ 0x4003C038) Word 3 [127:96] */
+ __I uint32_t RESERVED3[1001];
+ __I uint32_t FMSTAT; /*!< (@ 0x4003CFE0) Signature generation status register */
+ __I uint32_t RESERVED4[1];
+ __IO uint32_t FMSTATCLR; /*!< (@ 0x4003CFE8) Signature generation status clear register */
+} LPC_FLASHCTRL_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- SSP0/1 -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x SSP/SPI Modification date=3/16/2011 Major revision=0 Minor revision=3 (SSP0)
+ */
+
+typedef struct { /*!< (@ 0x40040000) SSP0 Structure */
+ __IO uint32_t CR0; /*!< (@ 0x40040000) Control Register 0. Selects the serial clock rate, bus type, and data size. */
+ __IO uint32_t CR1; /*!< (@ 0x40040004) Control Register 1. Selects master/slave and other modes. */
+ __IO uint32_t DR; /*!< (@ 0x40040008) Data Register. Writes fill the transmit FIFO, and reads empty the receive FIFO. */
+ __I uint32_t SR; /*!< (@ 0x4004000C) Status Register */
+ __IO uint32_t CPSR; /*!< (@ 0x40040010) Clock Prescale Register */
+ __IO uint32_t IMSC; /*!< (@ 0x40040014) Interrupt Mask Set and Clear Register */
+ __I uint32_t RIS; /*!< (@ 0x40040018) Raw Interrupt Status Register */
+ __I uint32_t MIS; /*!< (@ 0x4004001C) Masked Interrupt Status Register */
+ __IO uint32_t ICR; /*!< (@ 0x40040020) SSPICR Interrupt Clear Register */
+} LPC_SSPx_Type;
+
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- IOCONFIG -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x I/O configuration Modification date=3/16/2011 Major revision=0 Minor revision=3 (IOCONFIG)
+ */
+
+typedef struct { /*!< (@ 0x40044000) IOCONFIG Structure */
+ __IO uint32_t RESET_PIO0_0; /*!< (@ 0x40044000) I/O configuration for pin RESET/PIO0_0 */
+ __IO uint32_t PIO0_1; /*!< (@ 0x40044004) I/O configuration for pin PIO0_1/CLKOUT/CT32B0_MAT2/USB_FTOGGLE */
+ __IO uint32_t PIO0_2; /*!< (@ 0x40044008) I/O configuration for pin PIO0_2/SSEL0/CT16B0_CAP0 */
+ __IO uint32_t PIO0_3; /*!< (@ 0x4004400C) I/O configuration for pin PIO0_3/USB_VBUS */
+ __IO uint32_t PIO0_4; /*!< (@ 0x40044010) I/O configuration for pin PIO0_4/SCL */
+ __IO uint32_t PIO0_5; /*!< (@ 0x40044014) I/O configuration for pin PIO0_5/SDA */
+ __IO uint32_t PIO0_6; /*!< (@ 0x40044018) I/O configuration for pin PIO0_6/USB_CONNECT/SCK0 */
+ __IO uint32_t PIO0_7; /*!< (@ 0x4004401C) I/O configuration for pin PIO0_7/CTS */
+ __IO uint32_t PIO0_8; /*!< (@ 0x40044020) I/O configuration for pin PIO0_8/MISO0/CT16B0_MAT0 */
+ __IO uint32_t PIO0_9; /*!< (@ 0x40044024) I/O configuration for pin PIO0_9/MOSI0/CT16B0_MAT1 */
+ __IO uint32_t SWCLK_PIO0_10; /*!< (@ 0x40044028) I/O configuration for pin SWCLK/PIO0_10/ SCK0/CT16B0_MAT2 */
+ __IO uint32_t TDI_PIO0_11; /*!< (@ 0x4004402C) I/O configuration for pin TDI/PIO0_11/AD0/CT32B0_MAT3 */
+ __IO uint32_t TMS_PIO0_12; /*!< (@ 0x40044030) I/O configuration for pin TMS/PIO0_12/AD1/CT32B1_CAP0 */
+ __IO uint32_t TDO_PIO0_13; /*!< (@ 0x40044034) I/O configuration for pin TDO/PIO0_13/AD2/CT32B1_MAT0 */
+ __IO uint32_t TRST_PIO0_14; /*!< (@ 0x40044038) I/O configuration for pin TRST/PIO0_14/AD3/CT32B1_MAT1 */
+ __IO uint32_t SWDIO_PIO0_15; /*!< (@ 0x4004403C) I/O configuration for pin SWDIO/PIO0_15/AD4/CT32B1_MAT2 */
+ __IO uint32_t PIO0_16; /*!< (@ 0x40044040) I/O configuration for pin PIO0_16/AD5/CT32B1_MAT3/ WAKEUP */
+ __IO uint32_t PIO0_17; /*!< (@ 0x40044044) I/O configuration for pin PIO0_17/RTS/CT32B0_CAP0/SCLK */
+ __IO uint32_t PIO0_18; /*!< (@ 0x40044048) I/O configuration for pin PIO0_18/RXD/CT32B0_MAT0 */
+ __IO uint32_t PIO0_19; /*!< (@ 0x4004404C) I/O configuration for pin PIO0_19/TXD/CT32B0_MAT1 */
+ __IO uint32_t PIO0_20; /*!< (@ 0x40044050) I/O configuration for pin PIO0_20/CT16B1_CAP0 */
+ __IO uint32_t PIO0_21; /*!< (@ 0x40044054) I/O configuration for pin PIO0_21/CT16B1_MAT0/MOSI1 */
+ __IO uint32_t PIO0_22; /*!< (@ 0x40044058) I/O configuration for pin PIO0_22/AD6/CT16B1_MAT1/MISO1 */
+ __IO uint32_t PIO0_23; /*!< (@ 0x4004405C) I/O configuration for pin PIO0_23/AD7 */
+ __IO uint32_t PIO1_0; /*!< Offset: 0x060 */
+ __IO uint32_t PIO1_1;
+ __IO uint32_t PIO1_2;
+ __IO uint32_t PIO1_3;
+ __IO uint32_t PIO1_4; /*!< Offset: 0x070 */
+ __IO uint32_t PIO1_5; /*!< (@ 0x40044074) I/O configuration for pin PIO1_5/CT32B1_CAP1 */
+ __IO uint32_t PIO1_6;
+ __IO uint32_t PIO1_7;
+ __IO uint32_t PIO1_8; /*!< Offset: 0x080 */
+ __IO uint32_t PIO1_9;
+ __IO uint32_t PIO1_10;
+ __IO uint32_t PIO1_11;
+ __IO uint32_t PIO1_12; /*!< Offset: 0x090 */
+ __IO uint32_t PIO1_13; /*!< (@ 0x40044094) I/O configuration for pin PIO1_13/DTR/CT16B0_MAT0/TXD */
+ __IO uint32_t PIO1_14; /*!< (@ 0x40044098) I/O configuration for pin PIO1_14/DSR/CT16B0_MAT1/RXD */
+ __IO uint32_t PIO1_15; /*!< (@ 0x4004409C) I/O configuration for pin PIO1_15/DCD/ CT16B0_MAT2/SCK1 */
+ __IO uint32_t PIO1_16; /*!< (@ 0x400440A0) I/O configuration for pin PIO1_16/RI/CT16B0_CAP0 */
+ __IO uint32_t PIO1_17;
+ __IO uint32_t PIO1_18;
+ __IO uint32_t PIO1_19; /*!< (@ 0x400440AC) I/O configuration for pin PIO1_19/DTR/SSEL1 */
+ __IO uint32_t PIO1_20; /*!< (@ 0x400440B0) I/O configuration for pin PIO1_20/DSR/SCK1 */
+ __IO uint32_t PIO1_21; /*!< (@ 0x400440B4) I/O configuration for pin PIO1_21/DCD/MISO1 */
+ __IO uint32_t PIO1_22; /*!< (@ 0x400440B8) I/O configuration for pin PIO1_22/RI/MOSI1 */
+ __IO uint32_t PIO1_23; /*!< (@ 0x400440BC) I/O configuration for pin PIO1_23/CT16B1_MAT1/SSEL1 */
+ __IO uint32_t PIO1_24; /*!< (@ 0x400440C0) I/O configuration for pin PIO1_24/ CT32B0_MAT0 */
+ __IO uint32_t PIO1_25; /*!< (@ 0x400440C4) I/O configuration for pin PIO1_25/CT32B0_MAT1 */
+ __IO uint32_t PIO1_26; /*!< (@ 0x400440C8) I/O configuration for pin PIO1_26/CT32B0_MAT2/ RXD */
+ __IO uint32_t PIO1_27; /*!< (@ 0x400440CC) I/O configuration for pin PIO1_27/CT32B0_MAT3/ TXD */
+ __IO uint32_t PIO1_28; /*!< (@ 0x400440D0) I/O configuration for pin PIO1_28/CT32B0_CAP0/ SCLK */
+ __IO uint32_t PIO1_29; /*!< (@ 0x400440D4) I/O configuration for pin PIO1_29/SCK0/ CT32B0_CAP1 */
+ __IO uint32_t PIO1_30;
+ __IO uint32_t PIO1_31; /*!< (@ 0x400440DC) I/O configuration for pin PIO1_31 */
+} LPC_IOCON_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- SYSCON -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x System control block Modification date=3/16/2011 Major revision=0 Minor revision=3 (SYSCON)
+ */
+
+typedef struct { /*!< (@ 0x40048000) SYSCON Structure */
+ __IO uint32_t SYSMEMREMAP; /*!< (@ 0x40048000) System memory remap */
+ __IO uint32_t PRESETCTRL; /*!< (@ 0x40048004) Peripheral reset control */
+ __IO uint32_t SYSPLLCTRL; /*!< (@ 0x40048008) System PLL control */
+ __I uint32_t SYSPLLSTAT; /*!< (@ 0x4004800C) System PLL status */
+ __IO uint32_t USBPLLCTRL; /*!< (@ 0x40048010) USB PLL control */
+ __I uint32_t USBPLLSTAT; /*!< (@ 0x40048014) USB PLL status */
+ __I uint32_t RESERVED0[2];
+ __IO uint32_t SYSOSCCTRL; /*!< (@ 0x40048020) System oscillator control */
+ __IO uint32_t WDTOSCCTRL; /*!< (@ 0x40048024) Watchdog oscillator control */
+ __I uint32_t RESERVED1[2];
+ __IO uint32_t SYSRSTSTAT; /*!< (@ 0x40048030) System reset status register */
+ __I uint32_t RESERVED2[3];
+ __IO uint32_t SYSPLLCLKSEL; /*!< (@ 0x40048040) System PLL clock source select */
+ __IO uint32_t SYSPLLCLKUEN; /*!< (@ 0x40048044) System PLL clock source update enable */
+ __IO uint32_t USBPLLCLKSEL; /*!< (@ 0x40048048) USB PLL clock source select */
+ __IO uint32_t USBPLLCLKUEN; /*!< (@ 0x4004804C) USB PLL clock source update enable */
+ __I uint32_t RESERVED3[8];
+ __IO uint32_t MAINCLKSEL; /*!< (@ 0x40048070) Main clock source select */
+ __IO uint32_t MAINCLKUEN; /*!< (@ 0x40048074) Main clock source update enable */
+ __IO uint32_t SYSAHBCLKDIV; /*!< (@ 0x40048078) System clock divider */
+ __I uint32_t RESERVED4[1];
+ __IO uint32_t SYSAHBCLKCTRL; /*!< (@ 0x40048080) System clock control */
+ __I uint32_t RESERVED5[4];
+ __IO uint32_t SSP0CLKDIV; /*!< (@ 0x40048094) SSP0 clock divider */
+ __IO uint32_t UARTCLKDIV; /*!< (@ 0x40048098) UART clock divider */
+ __IO uint32_t SSP1CLKDIV; /*!< (@ 0x4004809C) SSP1 clock divider */
+ __I uint32_t RESERVED6[8];
+ __IO uint32_t USBCLKSEL; /*!< (@ 0x400480C0) USB clock source select */
+ __IO uint32_t USBCLKUEN; /*!< (@ 0x400480C4) USB clock source update enable */
+ __IO uint32_t USBCLKDIV; /*!< (@ 0x400480C8) USB clock source divider */
+ __I uint32_t RESERVED7[5];
+ __IO uint32_t CLKOUTSEL; /*!< (@ 0x400480E0) CLKOUT clock source select */
+ __IO uint32_t CLKOUTUEN; /*!< (@ 0x400480E4) CLKOUT clock source update enable */
+ __IO uint32_t CLKOUTDIV; /*!< (@ 0x400480E8) CLKOUT clock divider */
+ __I uint32_t RESERVED8[5];
+ __I uint32_t PIOPORCAP0; /*!< (@ 0x40048100) POR captured PIO status 0 */
+ __I uint32_t PIOPORCAP1; /*!< (@ 0x40048104) POR captured PIO status 1 */
+ __I uint32_t RESERVED9[18];
+ __IO uint32_t BODCTRL; /*!< (@ 0x40048150) Brown-Out Detect */
+ __IO uint32_t SYSTCKCAL; /*!< (@ 0x40048154) System tick counter calibration */
+ __I uint32_t RESERVED10[6];
+ __IO uint32_t IRQLATENCY; /*!< (@ 0x40048170) IQR delay */
+ __IO uint32_t NMISRC; /*!< (@ 0x40048174) NMI Source Control */
+ __IO uint32_t PINTSEL[8]; /*!< (@ 0x40048178) GPIO Pin Interrupt Select register 0 */
+ __IO uint32_t USBCLKCTRL; /*!< (@ 0x40048198) USB clock control */
+ __I uint32_t USBCLKST; /*!< (@ 0x4004819C) USB clock status */
+ __I uint32_t RESERVED11[25];
+ __IO uint32_t STARTERP0; /*!< (@ 0x40048204) Start logic 0 interrupt wake-up enable register 0 */
+ __I uint32_t RESERVED12[3];
+ __IO uint32_t STARTERP1; /*!< (@ 0x40048214) Start logic 1 interrupt wake-up enable register 1 */
+ __I uint32_t RESERVED13[6];
+ __IO uint32_t PDSLEEPCFG; /*!< (@ 0x40048230) Power-down states in deep-sleep mode */
+ __IO uint32_t PDAWAKECFG; /*!< (@ 0x40048234) Power-down states for wake-up from deep-sleep */
+ __IO uint32_t PDRUNCFG; /*!< (@ 0x40048238) Power configuration register */
+ __I uint32_t RESERVED14[110];
+ __I uint32_t DEVICE_ID; /*!< (@ 0x400483F4) Device ID */
+} LPC_SYSCON_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- GPIO_PIN_INT -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x GPIO Modification date=3/17/2011 Major revision=0 Minor revision=3 (GPIO_PIN_INT)
+ */
+
+typedef struct { /*!< (@ 0x4004C000) GPIO_PIN_INT Structure */
+ __IO uint32_t ISEL; /*!< (@ 0x4004C000) Pin Interrupt Mode register */
+ __IO uint32_t IENR; /*!< (@ 0x4004C004) Pin Interrupt Enable (Rising) register */
+ __IO uint32_t SIENR; /*!< (@ 0x4004C008) Set Pin Interrupt Enable (Rising) register */
+ __IO uint32_t CIENR; /*!< (@ 0x4004C00C) Clear Pin Interrupt Enable (Rising) register */
+ __IO uint32_t IENF; /*!< (@ 0x4004C010) Pin Interrupt Enable Falling Edge / Active Level register */
+ __IO uint32_t SIENF; /*!< (@ 0x4004C014) Set Pin Interrupt Enable Falling Edge / Active Level register */
+ __IO uint32_t CIENF; /*!< (@ 0x4004C018) Clear Pin Interrupt Enable Falling Edge / Active Level address */
+ __IO uint32_t RISE; /*!< (@ 0x4004C01C) Pin Interrupt Rising Edge register */
+ __IO uint32_t FALL; /*!< (@ 0x4004C020) Pin Interrupt Falling Edge register */
+ __IO uint32_t IST; /*!< (@ 0x4004C024) Pin Interrupt Status register */
+} LPC_GPIO_PIN_INT_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- GPIO_GROUP_INT0/1 -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x GPIO Modification date=3/17/2011 Major revision=0 Minor revision=3 (GPIO_GROUP_INT0)
+ */
+
+typedef struct { /*!< (@ 0x4005C000) GPIO_GROUP_INT0 Structure */
+ __IO uint32_t CTRL; /*!< (@ 0x4005C000) GPIO grouped interrupt control register */
+ __I uint32_t RESERVED0[7];
+ __IO uint32_t PORT_POL[2]; /*!< (@ 0x4005C020) GPIO grouped interrupt port 0 polarity register */
+ __I uint32_t RESERVED1[6];
+ __IO uint32_t PORT_ENA[2]; /*!< (@ 0x4005C040) GPIO grouped interrupt port 0/1 enable register */
+} LPC_GPIO_GROUP_INTx_Type;
+
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- USB -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x USB2.0device controller Modification date=3/16/2011 Major revision=0 Minor revision=3 (USB)
+ */
+
+typedef struct { /*!< (@ 0x40080000) USB Structure */
+ __IO uint32_t DEVCMDSTAT; /*!< (@ 0x40080000) USB Device Command/Status register */
+ __IO uint32_t INFO; /*!< (@ 0x40080004) USB Info register */
+ __IO uint32_t EPLISTSTART; /*!< (@ 0x40080008) USB EP Command/Status List start address */
+ __IO uint32_t DATABUFSTART; /*!< (@ 0x4008000C) USB Data buffer start address */
+ __IO uint32_t LPM; /*!< (@ 0x40080010) Link Power Management register */
+ __IO uint32_t EPSKIP; /*!< (@ 0x40080014) USB Endpoint skip */
+ __IO uint32_t EPINUSE; /*!< (@ 0x40080018) USB Endpoint Buffer in use */
+ __IO uint32_t EPBUFCFG; /*!< (@ 0x4008001C) USB Endpoint Buffer Configuration register */
+ __IO uint32_t INTSTAT; /*!< (@ 0x40080020) USB interrupt status register */
+ __IO uint32_t INTEN; /*!< (@ 0x40080024) USB interrupt enable register */
+ __IO uint32_t INTSETSTAT; /*!< (@ 0x40080028) USB set interrupt status register */
+ __IO uint32_t INTROUTING; /*!< (@ 0x4008002C) USB interrupt routing register */
+ __I uint32_t RESERVED0[1];
+ __I uint32_t EPTOGGLE; /*!< (@ 0x40080034) USB Endpoint toggle register */
+} LPC_USB_Type;
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- GPIO_PORT -----
+// ------------------------------------------------------------------------------------------------
+
+
+/**
+ * @brief Product name title=UM10462 Chapter title=LPC11U1x GPIO Modification date=3/17/2011 Major revision=0 Minor revision=3 (GPIO_PORT)
+ */
+
+typedef struct {
+ union {
+ struct {
+ __IO uint8_t B0[32]; /*!< (@ 0x50000000) Byte pin registers port 0; pins PIO0_0 to PIO0_31 */
+ __IO uint8_t B1[32]; /*!< (@ 0x50000020) Byte pin registers port 1 */
+ };
+ __IO uint8_t B[64]; /*!< (@ 0x50000000) Byte pin registers port 0/1 */
+ };
+ __I uint32_t RESERVED0[1008];
+ union {
+ struct {
+ __IO uint32_t W0[32]; /*!< (@ 0x50001000) Word pin registers port 0 */
+ __IO uint32_t W1[32]; /*!< (@ 0x50001080) Word pin registers port 1 */
+ };
+ __IO uint32_t W[64]; /*!< (@ 0x50001000) Word pin registers port 0/1 */
+ };
+ uint32_t RESERVED1[960];
+ __IO uint32_t DIR[2]; /* 0x2000 */
+ uint32_t RESERVED2[30];
+ __IO uint32_t MASK[2]; /* 0x2080 */
+ uint32_t RESERVED3[30];
+ __IO uint32_t PIN[2]; /* 0x2100 */
+ uint32_t RESERVED4[30];
+ __IO uint32_t MPIN[2]; /* 0x2180 */
+ uint32_t RESERVED5[30];
+ __IO uint32_t SET[2]; /* 0x2200 */
+ uint32_t RESERVED6[30];
+ __O uint32_t CLR[2]; /* 0x2280 */
+ uint32_t RESERVED7[30];
+ __O uint32_t NOT[2]; /* 0x2300 */
+} LPC_GPIO_Type;
+
+
+#if defined ( __CC_ARM )
+ #pragma no_anon_unions
+#endif
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- Peripheral memory map -----
+// ------------------------------------------------------------------------------------------------
+
+#define LPC_I2C_BASE (0x40000000)
+#define LPC_WWDT_BASE (0x40004000)
+#define LPC_USART_BASE (0x40008000)
+#define LPC_CT16B0_BASE (0x4000C000)
+#define LPC_CT16B1_BASE (0x40010000)
+#define LPC_CT32B0_BASE (0x40014000)
+#define LPC_CT32B1_BASE (0x40018000)
+#define LPC_ADC_BASE (0x4001C000)
+#define LPC_PMU_BASE (0x40038000)
+#define LPC_FLASHCTRL_BASE (0x4003C000)
+#define LPC_SSP0_BASE (0x40040000)
+#define LPC_SSP1_BASE (0x40058000)
+#define LPC_IOCON_BASE (0x40044000)
+#define LPC_SYSCON_BASE (0x40048000)
+#define LPC_GPIO_PIN_INT_BASE (0x4004C000)
+#define LPC_GPIO_GROUP_INT0_BASE (0x4005C000)
+#define LPC_GPIO_GROUP_INT1_BASE (0x40060000)
+#define LPC_USB_BASE (0x40080000)
+#define LPC_GPIO_BASE (0x50000000)
+
+
+// ------------------------------------------------------------------------------------------------
+// ----- Peripheral declaration -----
+// ------------------------------------------------------------------------------------------------
+
+#define LPC_I2C ((LPC_I2C_Type *) LPC_I2C_BASE)
+#define LPC_WWDT ((LPC_WWDT_Type *) LPC_WWDT_BASE)
+#define LPC_USART ((LPC_USART_Type *) LPC_USART_BASE)
+#define LPC_CT16B0 ((LPC_CTxxBx_Type *) LPC_CT16B0_BASE)
+#define LPC_CT16B1 ((LPC_CTxxBx_Type *) LPC_CT16B1_BASE)
+#define LPC_CT32B0 ((LPC_CTxxBx_Type *) LPC_CT32B0_BASE)
+#define LPC_CT32B1 ((LPC_CTxxBx_Type *) LPC_CT32B1_BASE)
+#define LPC_ADC ((LPC_ADC_Type *) LPC_ADC_BASE)
+#define LPC_PMU ((LPC_PMU_Type *) LPC_PMU_BASE)
+#define LPC_FLASHCTRL ((LPC_FLASHCTRL_Type *) LPC_FLASHCTRL_BASE)
+#define LPC_SSP0 ((LPC_SSPx_Type *) LPC_SSP0_BASE)
+#define LPC_SSP1 ((LPC_SSPx_Type *) LPC_SSP1_BASE)
+#define LPC_IOCON ((LPC_IOCON_Type *) LPC_IOCON_BASE)
+#define LPC_SYSCON ((LPC_SYSCON_Type *) LPC_SYSCON_BASE)
+#define LPC_GPIO_PIN_INT ((LPC_GPIO_PIN_INT_Type *) LPC_GPIO_PIN_INT_BASE)
+#define LPC_GPIO_GROUP_INT0 ((LPC_GPIO_GROUP_INTx_Type*) LPC_GPIO_GROUP_INT0_BASE)
+#define LPC_GPIO_GROUP_INT1 ((LPC_GPIO_GROUP_INTx_Type*) LPC_GPIO_GROUP_INT1_BASE)
+#define LPC_USB ((LPC_USB_Type *) LPC_USB_BASE)
+#define LPC_GPIO ((LPC_GPIO_Type *) LPC_GPIO_BASE)
+
+
+/** @} */ /* End of group Device_Peripheral_Registers */
+/** @} */ /* End of group (null) */
+/** @} */ /* End of group LPC11Uxx */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif // __LPC11UXX_H__
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_LPC11U37H_401/TARGET_NXP/TARGET_LPC11UXX/PeripheralPins.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,43 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef MBED_PERIPHERALPINS_H +#define MBED_PERIPHERALPINS_H + +#include "pinmap.h" +#include "PeripheralNames.h" + +/************ADC***************/ +extern const PinMap PinMap_ADC[]; + +/************I2C***************/ +extern const PinMap PinMap_I2C_SDA[]; +extern const PinMap PinMap_I2C_SCL[]; + +/************UART***************/ +extern const PinMap PinMap_UART_TX[]; +extern const PinMap PinMap_UART_RX[]; + +/************SPI***************/ +extern const PinMap PinMap_SPI_SCLK[]; +extern const PinMap PinMap_SPI_MOSI[]; +extern const PinMap PinMap_SPI_MISO[]; +extern const PinMap PinMap_SPI_SSEL[]; + +/************PWM***************/ +extern const PinMap PinMap_PWM[]; + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC11U37H_401/TARGET_NXP/TARGET_LPC11UXX/PortNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,31 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ Port0 = 0,
+ Port1 = 1
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC11U37H_401/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U37H_401/PeripheralNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,71 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ UART_0 = (int)LPC_USART_BASE
+} UARTName;
+
+typedef enum {
+ I2C_0 = (int)LPC_I2C_BASE
+} I2CName;
+
+typedef enum {
+ ADC0_0 = 0,
+ ADC0_1,
+ ADC0_2,
+ ADC0_3,
+ ADC0_4,
+ ADC0_5,
+ ADC0_6,
+ ADC0_7
+} ADCName;
+
+typedef enum {
+ SPI_0 = (int)LPC_SSP0_BASE,
+ SPI_1 = (int)LPC_SSP1_BASE
+} SPIName;
+
+typedef enum {
+ PWM_1 = 0,
+ PWM_2,
+ PWM_3,
+ PWM_4,
+ PWM_5,
+ PWM_6,
+ PWM_7,
+ PWM_8,
+ PWM_9,
+ PWM_10,
+ PWM_11
+} PWMName;
+
+#define STDIO_UART_TX UART_TX
+#define STDIO_UART_RX UART_RX
+#define STDIO_UART UART_0
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC11U37H_401/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U37H_401/PinNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,176 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT 5
+
+typedef enum {
+ // LPC11U Pin Names
+ P0_0 = 0,
+ P0_1 = 1,
+ P0_2 = 2,
+ P0_3 = 3,
+ P0_4 = 4,
+ P0_5 = 5,
+ P0_6 = 6,
+ P0_7 = 7,
+ P0_8 = 8,
+ P0_9 = 9,
+ P0_10 = 10,
+ P0_11 = 11,
+ P0_12 = 12,
+ P0_13 = 13,
+ P0_14 = 14,
+ P0_15 = 15,
+ P0_16 = 16,
+ P0_17 = 17,
+ P0_18 = 18,
+ P0_19 = 19,
+ P0_20 = 20,
+ P0_21 = 21,
+ P0_22 = 22,
+ P0_23 = 23,
+ P0_24 = 24,
+ P0_25 = 25,
+ P0_26 = 26,
+ P0_27 = 27,
+
+ P1_0 = 32,
+ P1_1 = 33,
+ P1_2 = 34,
+ P1_3 = 35,
+ P1_4 = 36,
+ P1_5 = 37,
+ P1_6 = 38,
+ P1_7 = 39,
+ P1_8 = 40,
+ P1_9 = 41,
+ P1_10 = 42,
+ P1_11 = 43,
+ P1_12 = 44,
+ P1_13 = 45,
+ P1_14 = 46,
+ P1_15 = 47,
+ P1_16 = 48,
+ P1_17 = 49,
+ P1_18 = 50,
+ P1_19 = 51,
+ P1_20 = 52,
+ P1_21 = 53,
+ P1_22 = 54,
+ P1_23 = 55,
+ P1_24 = 56,
+ P1_25 = 57,
+ P1_26 = 58,
+ P1_27 = 59,
+ P1_28 = 60,
+ P1_29 = 61,
+
+ P1_31 = 63,
+
+ // LED Names
+ LED1 = P1_24,
+ LED2 = P1_25,
+ LED3 = P1_26,
+ LED4 = P0_0,
+ LED5 = P1_3,
+ LED6 = P1_2,
+ LED7 = P1_1,
+ LED8 = P1_0,
+
+ // BTN Names
+ BTN1 = P0_16,
+ BTN2 = P0_1,
+
+ // UART
+ UART_TX = P0_19,
+ UART_RX = P0_18,
+
+ // Arduino Shield Receptacles Names
+ D0 = P0_18,
+ D1 = P0_19,
+ D2 = P1_17,
+ D3 = P1_24,
+ D4 = P1_5,
+ D5 = P0_1,
+ D6 = P1_27,
+ D7 = P0_7,
+ D8 = P0_2,
+ D9 = P1_25,
+ D10= P1_23,
+ D11= P0_21,
+ D12= P0_22,
+ D13= P1_15,
+ D14= P0_5,
+ D15= P0_4,
+
+ A0 = P0_11,
+ A1 = P0_12,
+ A2 = P0_13,
+ A3 = P0_16,
+ A4 = P0_5, // same port as SDA
+ A5 = P0_4, // same port as SCL
+
+ SDA= P0_5, // same port as A4
+ SCL= P0_4, // same port as A5
+
+ //SD Card pins
+ SDMOSI = P0_9,
+ SDMISO = P0_8,
+ SDSCLK = P1_29,
+ SDSSEL = P1_12,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF,
+} PinName;
+
+typedef enum {
+ CHANNEL0 = FLEX_INT0_IRQn,
+ CHANNEL1 = FLEX_INT1_IRQn,
+ CHANNEL2 = FLEX_INT2_IRQn,
+ CHANNEL3 = FLEX_INT3_IRQn,
+ CHANNEL4 = FLEX_INT4_IRQn,
+ CHANNEL5 = FLEX_INT5_IRQn,
+ CHANNEL6 = FLEX_INT6_IRQn,
+ CHANNEL7 = FLEX_INT7_IRQn
+} Channel;
+
+typedef enum {
+ PullUp = 2,
+ PullDown = 1,
+ PullNone = 0,
+ Repeater = 3,
+ OpenDrain = 4,
+ PullDefault = PullDown
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_LPC11U37H_401/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U37H_401/device.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,59 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_CAN 0 + +#define DEVICE_RTC 0 + +#define DEVICE_ETHERNET 0 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 32 +#define DEVICE_MAC_OFFSET 20 + +#define DEVICE_SLEEP 1 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 0 + +#define DEVICE_ERROR_PATTERN 1 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC11U37H_401/TARGET_NXP/TARGET_LPC11UXX/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_GPIO_OBJECT_H
+#define MBED_GPIO_OBJECT_H
+
+#include "mbed_assert.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ uint32_t mask;
+
+ __IO uint32_t *reg_dir;
+ __IO uint32_t *reg_set;
+ __IO uint32_t *reg_clr;
+ __I uint32_t *reg_in;
+} gpio_t;
+
+static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ if (value)
+ *obj->reg_set = obj->mask;
+ else
+ *obj->reg_clr = obj->mask;
+}
+
+static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ return ((*obj->reg_in & obj->mask) ? 1 : 0);
+}
+
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC11U37H_401/TARGET_NXP/TARGET_LPC11UXX/objects.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,66 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ uint32_t ch;
+};
+
+struct port_s {
+ __IO uint32_t *reg_dir;
+ __IO uint32_t *reg_mpin;
+ PortName port;
+ uint32_t mask;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+};
+
+struct serial_s {
+ LPC_USART_Type *uart;
+ int index;
+};
+
+struct analogin_s {
+ ADCName adc;
+};
+
+struct i2c_s {
+ LPC_I2C_Type *i2c;
+};
+
+struct spi_s {
+ LPC_SSPx_Type *spi;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC11U37H_401/TOOLCHAIN_ARM_MICRO/LPC11U37.sct Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,20 @@
+
+LR_IROM1 0x00000000 0x20000 { ; load region size_region (128K)
+ ER_IROM1 0x00000000 0x20000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+ ; 8_byte_aligned(48 vect * 4 bytes) = 8_byte_aligned(0xC0) = 0xC0
+ ; 8KB - 0xC0 = 0x1F40
+ RW_IRAM1 0x100000C0 0x1F40 {
+ .ANY (+RW +ZI)
+ }
+ RW_IRAM2 0x20000000 0x800 { ; RW data, I/O Handler RAM
+ .ANY (IOHANDLER_RAM)
+ }
+ RW_IRAM3 0x20004000 0x800 { ; RW data, USB RAM
+ .ANY (USBRAM)
+ }
+}
+
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_ARM_MICRO/startup_LPC11xx.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_ARM_MICRO/system_LPC11Uxx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC11U37H_401/TOOLCHAIN_ARM_STD/LPC11U37.sct Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,20 @@
+
+LR_IROM1 0x00000000 0x20000 { ; load region size_region (128K)
+ ER_IROM1 0x00000000 0x10000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+ ; 8_byte_aligned(48 vect * 4 bytes) = 8_byte_aligned(0xC0) = 0xC0
+ ; 8KB - 0xC0 = 0x1F40
+ RW_IRAM1 0x100000C0 0x1F40 {
+ .ANY (+RW +ZI)
+ }
+ RW_IRAM2 0x20000000 0x800 { ; RW data, I/O Handler RAM
+ .ANY (IOHANDLER_RAM)
+ }
+ RW_IRAM3 0x20004000 0x800 { ; RW data, USB RAM
+ .ANY (USBRAM)
+ }
+}
+
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_ARM_STD/startup_LPC11xx.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_ARM_STD/system_LPC11Uxx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC11U37H_401/TOOLCHAIN_GCC_ARM/LPC11U37.ld Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,152 @@
+/* Linker script to configure memory regions. */
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 128K
+ RAM (rwx) : ORIGIN = 0x100000C0, LENGTH = 0x1F40
+ RAMIO (rwx) : ORIGIN = 0x20000000, LENGTH = 0x800
+ USB_RAM (rwx): ORIGIN = 0x20004000, LENGTH = 0x800
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.isr_vector))
+ *(.text.Reset_Handler)
+
+ /* Only vectors and code running at reset are safe to be in first 512
+ bytes since RAM can be mapped into this area for RAM based interrupt
+ vectors. */
+ . = 0x00000200;
+ *(.text*)
+
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE (__fini_array_end = .);
+
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+
+ } > RAM
+
+ .bss :
+ {
+ __bss_start__ = .;
+ *(.bss*)
+ *(COMMON)
+ __bss_end__ = .;
+ } > RAM
+
+ .heap :
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy :
+ {
+ *(.stack)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_GCC_ARM/startup_LPC11xx.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_GCC_ARM/system_LPC11Uxx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC11U37H_401/TOOLCHAIN_GCC_CR/LPC11U37.ld Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,157 @@
+/* mbed - LPC11U35 linker script
+ * Based linker script generated by Code Red Technologies Red Suite 4.1
+ */
+GROUP(libgcc.a libc_s.a libstdc++_s.a libm.a libcr_newlib_nohost.a crti.o crtn.o crtbegin.o crtend.o)
+
+MEMORY
+{
+ /* Define each memory region */
+ MFlash32 (rx) : ORIGIN = 0x0, LENGTH = 0x20000 /* 128k */
+ RamLoc8 (rwx) : ORIGIN = 0x100000C0, LENGTH = 0x1F40 /* 8k */
+ RamIo1 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x800 /* 2k */
+ RamUsb2 (rwx) : ORIGIN = 0x20004000, LENGTH = 0x800 /* 2k */
+}
+ /* Define a symbol for the top of each memory region */
+ __top_MFlash32 = 0x0 + 0x10000;
+ __top_RamLoc8 = 0x10000000 + 0x1F40;
+ __top_RamIo1 = 0x20000000 + 0x800;
+ __top_RamUsb2 = 0x20004000 + 0x800;
+
+ENTRY(ResetISR)
+
+SECTIONS
+{
+
+ /* MAIN TEXT SECTION */
+ .text : ALIGN(4)
+ {
+ FILL(0xff)
+ KEEP(*(.isr_vector))
+ *(.text.ResetISR)
+ . = 0x200;
+
+ /* Global Section Table */
+ . = ALIGN(4) ;
+ __section_table_start = .;
+ __data_section_table = .;
+ LONG(LOADADDR(.data));
+ LONG( ADDR(.data)) ;
+ LONG( SIZEOF(.data));
+ LONG(LOADADDR(.data_RAM2));
+ LONG( ADDR(.data_RAM2)) ;
+ LONG( SIZEOF(.data_RAM2));
+ __data_section_table_end = .;
+ __bss_section_table = .;
+ LONG( ADDR(.bss));
+ LONG( SIZEOF(.bss));
+ LONG( ADDR(.bss_RAM2));
+ LONG( SIZEOF(.bss_RAM2));
+ __bss_section_table_end = .;
+ __section_table_end = . ;
+ /* End of Global Section Table */
+
+
+ *(.after_vectors*)
+
+ *(.text*)
+ *(.rodata .rodata.*)
+ . = ALIGN(4);
+
+ /* C++ constructors etc */
+ . = ALIGN(4);
+ KEEP(*(.init))
+
+ . = ALIGN(4);
+ __preinit_array_start = .;
+ KEEP (*(.preinit_array))
+ __preinit_array_end = .;
+
+ . = ALIGN(4);
+ __init_array_start = .;
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array))
+ __init_array_end = .;
+
+ KEEP(*(.fini));
+
+ . = ALIGN(0x4);
+ KEEP (*crtbegin.o(.ctors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
+ KEEP (*(SORT(.ctors.*)))
+ KEEP (*crtend.o(.ctors))
+
+ . = ALIGN(0x4);
+ KEEP (*crtbegin.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
+ KEEP (*(SORT(.dtors.*)))
+ KEEP (*crtend.o(.dtors))
+ /* End C++ */
+ } > MFlash32
+
+ /*
+ * for exception handling/unwind - some Newlib functions (in common
+ * with C++ and STDC++) use this.
+ */
+ .ARM.extab : ALIGN(4)
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > MFlash32
+ __exidx_start = .;
+
+ .ARM.exidx : ALIGN(4)
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > MFlash32
+ __exidx_end = .;
+
+ _etext = .;
+
+
+ .data_RAM2 : ALIGN(4)
+ {
+ FILL(0xff)
+ *(.data.$RAM2*)
+ *(.data.$RamUsb2*)
+ . = ALIGN(4) ;
+ } > RamUsb2 AT>MFlash32
+
+ /* MAIN DATA SECTION */
+
+ .uninit_RESERVED : ALIGN(4)
+ {
+ KEEP(*(.bss.$RESERVED*))
+ } > RamLoc8
+
+ .data : ALIGN(4)
+ {
+ FILL(0xff)
+ _data = .;
+ *(vtable)
+ *(.data*)
+ . = ALIGN(4) ;
+ _edata = .;
+ } > RamLoc8 AT>MFlash32
+
+
+ .bss_RAM2 : ALIGN(4)
+ {
+ *(.bss.$RAM2*)
+ *(.bss.$RamUsb2*)
+ . = ALIGN(4) ;
+ } > RamUsb2
+
+ /* MAIN BSS SECTION */
+ .bss : ALIGN(4)
+ {
+ _bss = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4) ;
+ _ebss = .;
+ PROVIDE(end = .);
+ __end__ = .;
+ } > RamLoc8
+
+ PROVIDE(_pvHeapStart = .);
+ PROVIDE(_vStackTop = __top_RamLoc8 - 0);
+}
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_GCC_CR/board.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_GCC_CR/cmsis_nvic.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_GCC_CR/retarget.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_GCC_CR/startup_LPC11xx.o has changed
Binary file TARGET_LPC11U37H_401/TOOLCHAIN_GCC_CR/system_LPC11Uxx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_LPC11U37H_401/cmsis.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,13 @@ +/* mbed Microcontroller Library - CMSIS + * Copyright (C) 2009-2011 ARM Limited. All rights reserved. + * + * A generic CMSIS include header, pulling in LPC11U24 specifics + */ + +#ifndef MBED_CMSIS_H +#define MBED_CMSIS_H + +#include "LPC11Uxx.h" +#include "cmsis_nvic.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC11U37H_401/cmsis_nvic.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,51 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2011 ARM Limited. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of ARM Limited nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+#include "cmsis.h"
+
+#define NVIC_NUM_VECTORS (16 + 32) // CORE + MCU Peripherals
+#define NVIC_USER_IRQ_OFFSET 16
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
+uint32_t NVIC_GetVector(IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC11U37H_401/core_ca9.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,271 @@
+/**************************************************************************//**
+ * @file core_ca9.h
+ * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File
+ * @version
+ * @date 25 March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CA9_H_GENERIC
+#define __CORE_CA9_H_GENERIC
+
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_A9
+ @{
+ */
+
+/* CMSIS CA9 definitions */
+#define __CA9_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CA9_CMSIS_VERSION_SUB (0x10) /*!< [15:0] CMSIS HAL sub version */
+#define __CA9_CMSIS_VERSION ((__CA9_CMSIS_VERSION_MAIN << 16) | \
+ __CA9_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_A (0x09) /*!< Cortex-A Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /*!< standard types definitions */
+#include "core_caInstr.h" /*!< Core Instruction Access */
+#include "core_caFunc.h" /*!< Core Function Access */
+#include "core_cm4_simd.h" /*!< Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CA9_H_DEPENDANT
+#define __CORE_CA9_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CA9_REV
+ #define __CA9_REV 0x0000
+ #warning "__CA9_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 1
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 1
+ #endif
+
+ #if __Vendor_SysTickConfig == 0
+ #error "__Vendor_SysTickConfig set to 0, but vendor systick timer must be supplied for Cortex-A9"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_A9 */
+
+
+/*******************************************************************************
+ * Register Abstraction
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-A processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t reserved1:7; /*!< bit: 20..23 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/*@} end of group CMSIS_CORE */
+
+/*@} end of CMSIS_Core_FPUFunctions */
+
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC11U37H_401/core_caFunc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,592 @@
+/**************************************************************************//**
+ * @file core_caFunc.h
+ * @brief CMSIS Cortex-A Core Function Access Header File
+ * @version V3.10
+ * @date 9 May 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CAFUNC_H__
+#define __CORE_CAFUNC_H__
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get CPSR Register
+
+ This function returns the content of the CPSR Register.
+
+ \return CPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_CPSR(void)
+{
+ register uint32_t __regCPSR __ASM("cpsr");
+ return(__regCPSR);
+}
+
+/** \brief Set Stack Pointer
+
+ This function assigns the given value to the current stack pointer.
+
+ \param [in] topOfStack Stack Pointer value to set
+ */
+register uint32_t __regSP __ASM("sp");
+__STATIC_INLINE void __set_SP(uint32_t topOfStack)
+{
+ __regSP = topOfStack;
+}
+
+
+/** \brief Get link register
+
+ This function returns the value of the link register
+
+ \return Value of link register
+ */
+register uint32_t __reglr __ASM("lr");
+__STATIC_INLINE uint32_t __get_LR(void)
+{
+ return(__reglr);
+}
+
+/** \brief Set link register
+
+ This function sets the value of the link register
+
+ \param [in] lr LR value to set
+ */
+__STATIC_INLINE void __set_LR(uint32_t lr)
+{
+ __reglr = lr;
+}
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_PSP(uint32_t topOfProcStack)
+{
+ ARM
+ PRESERVE8
+
+ BIC R0, R0, #7 ;ensure stack is 8-byte aligned
+ MRS R1, CPSR
+ CPS #MODE_SYS ;no effect in USR mode
+ MOV SP, R0
+ MSR CPSR_c, R1 ;no effect in USR mode
+ ISB
+ BX LR
+
+}
+
+/** \brief Set User Mode
+
+ This function changes the processor state to User Mode
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_CPS_USR(void)
+{
+ ARM
+
+ CPS #MODE_USR
+ BX LR
+}
+
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+/** \brief Get FPEXC
+
+ This function returns the current value of the Floating Point Exception Control register.
+
+ \return Floating Point Exception Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPEXC(void)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ return(__regfpexc);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPEXC
+
+ This function assigns the given value to the Floating Point Exception Control register.
+
+ \param [in] fpscr Floating Point Exception Control value to set
+ */
+__STATIC_INLINE void __set_FPEXC(uint32_t fpexc)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ __regfpexc = (fpexc);
+#endif
+}
+
+/** \brief Get CPACR
+
+ This function returns the current value of the Coprocessor Access Control register.
+
+ \return Coprocessor Access Control register value
+ */
+__STATIC_INLINE uint32_t __get_CPACR(void)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ return __regCPACR;
+}
+
+/** \brief Set CPACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] cpacr Coporcessor Acccess Control value to set
+ */
+__STATIC_INLINE void __set_CPACR(uint32_t cpacr)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ __regCPACR = cpacr;
+ __ISB();
+}
+
+/** \brief Get CBAR
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Configuration Base Address register value
+ */
+__STATIC_INLINE uint32_t __get_CBAR() {
+ register uint32_t __regCBAR __ASM("cp15:4:c15:c0:0");
+ return(__regCBAR);
+}
+
+/** \brief Get TTBR0
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Translation Table Base Register 0 value
+ */
+__STATIC_INLINE uint32_t __get_TTBR0() {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ return(__regTTBR0);
+}
+
+/** \brief Set TTBR0
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] ttbr0 Translation Table Base Register 0 value to set
+ */
+__STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ __regTTBR0 = ttbr0;
+ __ISB();
+}
+
+/** \brief Get DACR
+
+ This function returns the value of the Domain Access Control Register.
+
+ \return Domain Access Control Register value
+ */
+__STATIC_INLINE uint32_t __get_DACR() {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ return(__regDACR);
+}
+
+/** \brief Set DACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] dacr Domain Access Control Register value to set
+ */
+__STATIC_INLINE void __set_DACR(uint32_t dacr) {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ __regDACR = dacr;
+ __ISB();
+}
+
+/******************************** Cache and BTAC enable ****************************************************/
+
+/** \brief Set SCTLR
+
+ This function assigns the given value to the System Control Register.
+
+ \param [in] sctlr System Control Register, value to set
+ */
+__STATIC_INLINE void __set_SCTLR(uint32_t sctlr)
+{
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ __regSCTLR = sctlr;
+}
+
+/** \brief Get SCTLR
+
+ This function returns the value of the System Control Register.
+
+ \return System Control Register value
+ */
+__STATIC_INLINE uint32_t __get_SCTLR() {
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ return(__regSCTLR);
+}
+
+/** \brief Enable Caches
+
+ Enable Caches
+ */
+__STATIC_INLINE void __enable_caches(void) {
+ // Set I bit 12 to enable I Cache
+ // Set C bit 2 to enable D Cache
+ __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief Disable Caches
+
+ Disable Caches
+ */
+__STATIC_INLINE void __disable_caches(void) {
+ // Clear I bit 12 to disable I Cache
+ // Clear C bit 2 to disable D Cache
+ __set_SCTLR( __get_SCTLR() & ~(1 << 12) & ~(1 << 2));
+ __ISB();
+}
+
+/** \brief Enable BTAC
+
+ Enable BTAC
+ */
+__STATIC_INLINE void __enable_btac(void) {
+ // Set Z bit 11 to enable branch prediction
+ __set_SCTLR( __get_SCTLR() | (1 << 11));
+ __ISB();
+}
+
+/** \brief Disable BTAC
+
+ Disable BTAC
+ */
+__STATIC_INLINE void __disable_btac(void) {
+ // Clear Z bit 11 to disable branch prediction
+ __set_SCTLR( __get_SCTLR() & ~(1 << 11));
+}
+
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __enable_mmu(void) {
+ // Set M bit 0 to enable the MMU
+ // Set AFE bit to enable simplified access permissions model
+ // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+ __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+ __ISB();
+}
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __disable_mmu(void) {
+ // Clear M bit 0 to disable the MMU
+ __set_SCTLR( __get_SCTLR() & ~1);
+ __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief Invalidate the whole tlb
+
+ TLBIALL. Invalidate the whole tlb
+ */
+
+__STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+ register uint32_t __TLBIALL __ASM("cp15:0:c8:c7:0");
+ __TLBIALL = 0;
+ __DSB();
+ __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief Invalidate entire branch predictor array
+
+ BPIALL. Branch Predictor Invalidate All.
+ */
+
+__STATIC_INLINE void __v7_inv_btac(void) {
+ register uint32_t __BPIALL __ASM("cp15:0:c7:c5:6");
+ __BPIALL = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief Invalidate the whole I$
+
+ ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+__STATIC_INLINE void __v7_inv_icache_all(void) {
+ register uint32_t __ICIALLU __ASM("cp15:0:c7:c5:0");
+ __ICIALLU = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new I cache state
+}
+
+/** \brief Clean D$ by MVA
+
+ DCCMVAC. Data cache clean by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_dcache_mva(void *va) {
+ register uint32_t __DCCMVAC __ASM("cp15:0:c7:c10:1");
+ __DCCMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Invalidate D$ by MVA
+
+ DCIMVAC. Data cache invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_inv_dcache_mva(void *va) {
+ register uint32_t __DCIMVAC __ASM("cp15:0:c7:c6:1");
+ __DCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Clean and Invalidate D$ by MVA
+
+ DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+ register uint32_t __DCCIMVAC __ASM("cp15:0:c7:c14:1");
+ __DCCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief
+ * Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency.
+ */
+#pragma push
+#pragma arm
+__STATIC_ASM void __v7_all_cache(uint32_t op) {
+ ARM
+
+ PUSH {R4-R11}
+
+ MRC p15, 1, R6, c0, c0, 1 // Read CLIDR
+ ANDS R3, R6, #0x07000000 // Extract coherency level
+ MOV R3, R3, LSR #23 // Total cache levels << 1
+ BEQ Finished // If 0, no need to clean
+
+ MOV R10, #0 // R10 holds current cache level << 1
+Loop1 ADD R2, R10, R10, LSR #1 // R2 holds cache "Set" position
+ MOV R1, R6, LSR R2 // Bottom 3 bits are the Cache-type for this level
+ AND R1, R1, #7 // Isolate those lower 3 bits
+ CMP R1, #2
+ BLT Skip // No cache or only instruction cache at this level
+
+ MCR p15, 2, R10, c0, c0, 0 // Write the Cache Size selection register
+ ISB // ISB to sync the change to the CacheSizeID reg
+ MRC p15, 1, R1, c0, c0, 0 // Reads current Cache Size ID register
+ AND R2, R1, #7 // Extract the line length field
+ ADD R2, R2, #4 // Add 4 for the line length offset (log2 16 bytes)
+ LDR R4, =0x3FF
+ ANDS R4, R4, R1, LSR #3 // R4 is the max number on the way size (right aligned)
+ CLZ R5, R4 // R5 is the bit position of the way size increment
+ LDR R7, =0x7FFF
+ ANDS R7, R7, R1, LSR #13 // R7 is the max number of the index size (right aligned)
+
+Loop2 MOV R9, R4 // R9 working copy of the max way size (right aligned)
+
+Loop3 ORR R11, R10, R9, LSL R5 // Factor in the Way number and cache number into R11
+ ORR R11, R11, R7, LSL R2 // Factor in the Set number
+ CMP R0, #0
+ BNE Dccsw
+ MCR p15, 0, R11, c7, c6, 2 // DCISW. Invalidate by Set/Way
+ B cont
+Dccsw CMP R0, #1
+ BNE Dccisw
+ MCR p15, 0, R11, c7, c10, 2 // DCCSW. Clean by Set/Way
+ B cont
+Dccisw MCR p15, 0, R11, c7, c14, 2 // DCCISW, Clean and Invalidate by Set/Way
+cont SUBS R9, R9, #1 // Decrement the Way number
+ BGE Loop3
+ SUBS R7, R7, #1 // Decrement the Set number
+ BGE Loop2
+Skip ADD R10, R10, #2 // increment the cache number
+ CMP R3, R10
+ BGT Loop1
+
+Finished
+ DSB
+ POP {R4-R11}
+ BX lr
+
+}
+#pragma pop
+
+/** \brief __v7_all_cache - helper function
+
+ */
+
+/** \brief Invalidate the whole D$
+
+ DCISW. Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_inv_dcache_all(void) {
+ __v7_all_cache(0);
+}
+
+/** \brief Clean the whole D$
+
+ DCCSW. Clean by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_dcache_all(void) {
+ __v7_all_cache(1);
+}
+
+/** \brief Clean and invalidate the whole D$
+
+ DCCISW. Clean and Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_inv_dcache_all(void) {
+ __v7_all_cache(2);
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__ICCARM__)) /*---------------- ICC Compiler ---------------------*/
+
+#error IAR Compiler support not implemented for Cortex-A
+
+#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
+
+//#error GNU Compiler support not implemented for Cortex-A
+
+#elif (defined (__TASKING__)) /*--------------- TASKING Compiler -----------------*/
+
+#error TASKING Compiler support not implemented for Cortex-A
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CAFUNC_H__ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_LPC11U37H_401/core_caInstr.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,45 @@ +/**************************************************************************//** + * @file core_caInstr.h + * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File + * @version + * @date 04. December 2012 + * + * @note + * + ******************************************************************************/ +/* Copyright (c) 2009 - 2012 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + +#ifndef __CORE_CAINSTR_H__ +#define __CORE_CAINSTR_H__ + +#define __CORTEX_M 0x3 +#include "core_cmInstr.h" +#undef __CORTEX_M + +#endif +
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC11U37H_401/core_ca_mmu.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,848 @@
+;/**************************************************************************//**
+; * @file core_ca_mmu.h
+; * @brief MMU Startup File for
+; * VE_A9_MP Device Series
+; * @version V1.01
+; * @date 25 March 2013
+; *
+; * @note
+; *
+; ******************************************************************************/
+;/* Copyright (c) 2012 ARM LIMITED
+;
+; All rights reserved.
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+; - Redistributions of source code must retain the above copyright
+; notice, this list of conditions and the following disclaimer.
+; - Redistributions in binary form must reproduce the above copyright
+; notice, this list of conditions and the following disclaimer in the
+; documentation and/or other materials provided with the distribution.
+; - Neither the name of ARM nor the names of its contributors may be used
+; to endorse or promote products derived from this software without
+; specific prior written permission.
+; *
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+; ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+; LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+; CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+; SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+; INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+; CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+; ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+; POSSIBILITY OF SUCH DAMAGE.
+; ---------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef _MMU_FUNC_H
+#define _MMU_FUNC_H
+
+#define SECTION_DESCRIPTOR (0x2)
+#define SECTION_MASK (0xFFFFFFFC)
+
+#define SECTION_TEXCB_MASK (0xFFFF8FF3)
+#define SECTION_B_SHIFT (2)
+#define SECTION_C_SHIFT (3)
+#define SECTION_TEX0_SHIFT (12)
+#define SECTION_TEX1_SHIFT (13)
+#define SECTION_TEX2_SHIFT (14)
+
+#define SECTION_XN_MASK (0xFFFFFFEF)
+#define SECTION_XN_SHIFT (4)
+
+#define SECTION_DOMAIN_MASK (0xFFFFFE1F)
+#define SECTION_DOMAIN_SHIFT (5)
+
+#define SECTION_P_MASK (0xFFFFFDFF)
+#define SECTION_P_SHIFT (9)
+
+#define SECTION_AP_MASK (0xFFFF73FF)
+#define SECTION_AP_SHIFT (10)
+#define SECTION_AP2_SHIFT (15)
+
+#define SECTION_S_MASK (0xFFFEFFFF)
+#define SECTION_S_SHIFT (16)
+
+#define SECTION_NG_MASK (0xFFFDFFFF)
+#define SECTION_NG_SHIFT (17)
+
+#define SECTION_NS_MASK (0xFFF7FFFF)
+#define SECTION_NS_SHIFT (19)
+
+
+#define PAGE_L1_DESCRIPTOR (0x1)
+#define PAGE_L1_MASK (0xFFFFFFFC)
+
+#define PAGE_L2_4K_DESC (0x2)
+#define PAGE_L2_4K_MASK (0xFFFFFFFD)
+
+#define PAGE_L2_64K_DESC (0x1)
+#define PAGE_L2_64K_MASK (0xFFFFFFFC)
+
+#define PAGE_4K_TEXCB_MASK (0xFFFFFE33)
+#define PAGE_4K_B_SHIFT (2)
+#define PAGE_4K_C_SHIFT (3)
+#define PAGE_4K_TEX0_SHIFT (6)
+#define PAGE_4K_TEX1_SHIFT (7)
+#define PAGE_4K_TEX2_SHIFT (8)
+
+#define PAGE_64K_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_64K_B_SHIFT (2)
+#define PAGE_64K_C_SHIFT (3)
+#define PAGE_64K_TEX0_SHIFT (12)
+#define PAGE_64K_TEX1_SHIFT (13)
+#define PAGE_64K_TEX2_SHIFT (14)
+
+#define PAGE_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_B_SHIFT (2)
+#define PAGE_C_SHIFT (3)
+#define PAGE_TEX_SHIFT (12)
+
+#define PAGE_XN_4K_MASK (0xFFFFFFFE)
+#define PAGE_XN_4K_SHIFT (0)
+#define PAGE_XN_64K_MASK (0xFFFF7FFF)
+#define PAGE_XN_64K_SHIFT (15)
+
+
+#define PAGE_DOMAIN_MASK (0xFFFFFE1F)
+#define PAGE_DOMAIN_SHIFT (5)
+
+#define PAGE_P_MASK (0xFFFFFDFF)
+#define PAGE_P_SHIFT (9)
+
+#define PAGE_AP_MASK (0xFFFFFDCF)
+#define PAGE_AP_SHIFT (4)
+#define PAGE_AP2_SHIFT (9)
+
+#define PAGE_S_MASK (0xFFFFFBFF)
+#define PAGE_S_SHIFT (10)
+
+#define PAGE_NG_MASK (0xFFFFF7FF)
+#define PAGE_NG_SHIFT (11)
+
+#define PAGE_NS_MASK (0xFFFFFFF7)
+#define PAGE_NS_SHIFT (3)
+
+#define OFFSET_1M (0x00100000)
+#define OFFSET_64K (0x00010000)
+#define OFFSET_4K (0x00001000)
+
+#define DESCRIPTOR_FAULT (0x00000000)
+
+/* ########################### MMU Function Access ########################### */
+/** \ingroup MMU_FunctionInterface
+ \defgroup MMU_Functions MMU Functions Interface
+ @{
+ */
+
+/* Attributes enumerations */
+
+/* Region size attributes */
+typedef enum
+{
+ SECTION,
+ PAGE_4k,
+ PAGE_64k,
+} mmu_region_size_Type;
+
+/* Region type attributes */
+typedef enum
+{
+ NORMAL,
+ DEVICE,
+ SHARED_DEVICE,
+ NON_SHARED_DEVICE,
+ STRONGLY_ORDERED
+} mmu_memory_Type;
+
+/* Region cacheability attributes */
+typedef enum
+{
+ NON_CACHEABLE,
+ WB_WA,
+ WT,
+ WB_NO_WA,
+} mmu_cacheability_Type;
+
+/* Region parity check attributes */
+typedef enum
+{
+ ECC_DISABLED,
+ ECC_ENABLED,
+} mmu_ecc_check_Type;
+
+/* Region execution attributes */
+typedef enum
+{
+ EXECUTE,
+ NON_EXECUTE,
+} mmu_execute_Type;
+
+/* Region global attributes */
+typedef enum
+{
+ GLOBAL,
+ NON_GLOBAL,
+} mmu_global_Type;
+
+/* Region shareability attributes */
+typedef enum
+{
+ NON_SHARED,
+ SHARED,
+} mmu_shared_Type;
+
+/* Region security attributes */
+typedef enum
+{
+ SECURE,
+ NON_SECURE,
+} mmu_secure_Type;
+
+/* Region access attributes */
+typedef enum
+{
+ NO_ACCESS,
+ RW,
+ READ,
+} mmu_access_Type;
+
+/* Memory Region definition */
+typedef struct RegionStruct {
+ mmu_region_size_Type rg_t;
+ mmu_memory_Type mem_t;
+ uint8_t domain;
+ mmu_cacheability_Type inner_norm_t;
+ mmu_cacheability_Type outer_norm_t;
+ mmu_ecc_check_Type e_t;
+ mmu_execute_Type xn_t;
+ mmu_global_Type g_t;
+ mmu_secure_Type sec_t;
+ mmu_access_Type priv_t;
+ mmu_access_Type user_t;
+ mmu_shared_Type sh_t;
+
+} mmu_region_attributes_Type;
+
+/** \brief Set section execution-never attribute
+
+ The function sets section execution-never attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] xn Section execution-never attribute : EXECUTE , NON_EXECUTE.
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_section(uint32_t *descriptor_l1, mmu_execute_Type xn)
+{
+ *descriptor_l1 &= SECTION_XN_MASK;
+ *descriptor_l1 |= ((xn & 0x1) << SECTION_XN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section domain
+
+ The function sets section domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Section domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_section(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= SECTION_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xF) << SECTION_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section parity check
+
+ The function sets section parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_section(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set section access privileges
+
+ The function sets section access privileges
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_section(uint32_t *descriptor_l1, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x6; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l1 &= SECTION_AP_MASK;
+ *descriptor_l1 |= (ap & 0x3) << SECTION_AP_SHIFT;
+ *descriptor_l1 |= ((ap & 0x4)>>2) << SECTION_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set section shareability
+
+ The function sets section shareability
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_section(uint32_t *descriptor_l1, mmu_shared_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_S_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Global attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] g_bit Section attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_section(uint32_t *descriptor_l1, mmu_global_Type g_bit)
+{
+ *descriptor_l1 &= SECTION_NG_MASK;
+ *descriptor_l1 |= ((g_bit & 0x1) << SECTION_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Security attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_section(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_NS_SHIFT);
+ return 0;
+}
+
+/* Page 4k or 64k */
+/** \brief Set 4k/64k page execution-never attribute
+
+ The function sets 4k/64k page execution-never attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] xn Page execution-never attribute : EXECUTE , NON_EXECUTE.
+ \param [in] page Page size: PAGE_4k, PAGE_64k,
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_page(uint32_t *descriptor_l2, mmu_execute_Type xn, mmu_region_size_Type page)
+{
+ if (page == PAGE_4k)
+ {
+ *descriptor_l2 &= PAGE_XN_4K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_4K_SHIFT);
+ }
+ else
+ {
+ *descriptor_l2 &= PAGE_XN_64K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_64K_SHIFT);
+ }
+ return 0;
+}
+
+/** \brief Set 4k/64k page domain
+
+ The function sets 4k/64k page domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Page domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_page(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= PAGE_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xf) << PAGE_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page parity check
+
+ The function sets 4k/64k page parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_page(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page access privileges
+
+ The function sets 4k/64k page access privileges
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_page(uint32_t *descriptor_l2, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x6; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l2 &= PAGE_AP_MASK;
+ *descriptor_l2 |= (ap & 0x3) << PAGE_AP_SHIFT;
+ *descriptor_l2 |= ((ap & 0x4)>>2) << PAGE_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page shareability
+
+ The function sets 4k/64k page shareability
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] s_bit 4k/64k page shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_page(uint32_t *descriptor_l2, mmu_shared_Type s_bit)
+{
+ *descriptor_l2 &= PAGE_S_MASK;
+ *descriptor_l2 |= ((s_bit & 0x1) << PAGE_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Global attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] g_bit 4k/64k page attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_page(uint32_t *descriptor_l2, mmu_global_Type g_bit)
+{
+ *descriptor_l2 &= PAGE_NG_MASK;
+ *descriptor_l2 |= ((g_bit & 0x1) << PAGE_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Security attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit 4k/64k page Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_page(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= PAGE_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << PAGE_NS_SHIFT);
+ return 0;
+}
+
+
+/** \brief Set Section memory attributes
+
+ The function sets section memory attributes
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] mem Section memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_section(uint32_t *descriptor_l1, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner)
+{
+ *descriptor_l1 &= SECTION_TEXCB_MASK;
+
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l1 |= 1 << SECTION_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT) | (1 << SECTION_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT) | (1 << SECTION_TEX0_SHIFT);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page memory attributes
+
+ The function sets 4k/64k page memory attributes
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] mem 4k/64k page memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_page(uint32_t *descriptor_l2, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner, mmu_region_size_Type page)
+{
+ *descriptor_l2 &= PAGE_4K_TEXCB_MASK;
+
+ if (page == PAGE_64k)
+ {
+ //same as section
+ __memory_section(descriptor_l2, mem, outer, inner);
+ }
+ else
+ {
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l2 |= 1 << PAGE_4K_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT) | (1 << PAGE_4K_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT) | (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Create a L1 section descriptor
+
+ The function creates a section descriptor.
+
+ Assumptions:
+ - 16MB super sections not suported
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg Section attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_section_descriptor(uint32_t *descriptor, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+
+ __memory_section(descriptor, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t);
+ __xn_section(descriptor,reg.xn_t);
+ __domain_section(descriptor, reg.domain);
+ __p_section(descriptor, reg.e_t);
+ __ap_section(descriptor, reg.priv_t, reg.user_t, 1);
+ __shared_section(descriptor,reg.sh_t);
+ __global_section(descriptor,reg.g_t);
+ __secure_section(descriptor,reg.sec_t);
+ *descriptor &= SECTION_MASK;
+ *descriptor |= SECTION_DESCRIPTOR;
+
+ return 0;
+
+}
+
+
+/** \brief Create a L1 and L2 4k/64k page descriptor
+
+ The function creates a 4k/64k page descriptor.
+ Assumptions:
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg 4k/64k page attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_page_descriptor(uint32_t *descriptor, uint32_t *descriptor2, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+ *descriptor2 = 0;
+
+ switch (reg.rg_t)
+ {
+ case PAGE_4k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_4k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_4k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_4K_MASK;
+ *descriptor2 |= PAGE_L2_4K_DESC;
+ break;
+
+ case PAGE_64k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_64k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_64k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_64K_MASK;
+ *descriptor2 |= PAGE_L2_64K_DESC;
+ break;
+
+ case SECTION:
+ //error
+ break;
+
+ }
+
+ return 0;
+
+}
+
+/** \brief Create a 1MB Section
+
+ \param [in] ttb Translation table base address
+ \param [in] base_address Section base address
+ \param [in] count Number of sections to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTSection(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1)
+{
+ uint32_t offset;
+ uint32_t entry;
+ uint32_t i;
+
+ offset = base_address >> 20;
+ entry = (base_address & 0xFFF00000) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb = ttb + offset;
+
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb++ = entry;
+ entry += OFFSET_1M;
+ }
+}
+
+/** \brief Create a 4k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 4k base address
+ \param [in] count Number of 4k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_4k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFFF000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_4K;
+ }
+}
+
+/** \brief Create a 64k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 64k base address
+ \param [in] count Number of 64k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_64k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i,j;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFF0000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //create 16 entries
+ for (j = 0; j < 16; j++)
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_64K;
+ }
+}
+
+/*@} end of MMU_Functions */
+#endif
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC11U37H_401/core_cm0.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,682 @@
+/**************************************************************************//**
+ * @file core_cm0.h
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M0
+ @{
+ */
+
+/* CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC11U37H_401/core_cm0plus.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,793 @@
+/**************************************************************************//**
+ * @file core_cm0plus.h
+ * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0PLUS_H_GENERIC
+#define __CORE_CM0PLUS_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex-M0+
+ @{
+ */
+
+/* CMSIS CM0P definitions */
+#define __CM0PLUS_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0PLUS_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16) | \
+ __CM0PLUS_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0PLUS_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0PLUS_H_DEPENDANT
+#define __CORE_CM0PLUS_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0PLUS_REV
+ #define __CM0PLUS_REV 0x0000
+ #warning "__CM0PLUS_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __VTOR_PRESENT
+ #define __VTOR_PRESENT 0
+ #warning "__VTOR_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex-M0+ */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+#if (__VTOR_PRESENT == 1)
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+#else
+ uint32_t RESERVED0;
+#endif
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if (__VTOR_PRESENT == 1)
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 8 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 8 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0+ Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0PLUS_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC11U37H_401/core_cm3.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1627 @@
+/**************************************************************************//**
+ * @file core_cm3.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM3_H_GENERIC
+#define __CORE_CM3_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M3
+ @{
+ */
+
+/* CMSIS CM3 definitions */
+#define __CM3_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | \
+ __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x03) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI__VFP_SUPPORT____
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM3_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM3_H_DEPENDANT
+#define __CORE_CM3_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM3_REV
+ #define __CM3_REV 0x0200
+ #warning "__CM3_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M3 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#if (__CM3_REV < 0x0201) /* core r2p1 */
+#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#else
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+#else
+ uint32_t RESERVED1[1];
+#endif
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM3_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC11U37H_401/core_cm4.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1772 @@
+/**************************************************************************//**
+ * @file core_cm4.h
+ * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_H_GENERIC
+#define __CORE_CM4_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M4
+ @{
+ */
+
+/* CMSIS CM4 definitions */
+#define __CM4_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM4_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16) | \
+ __CM4_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x04) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+#include <core_cm4_simd.h> /* Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CM4_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM4_H_DEPENDANT
+#define __CORE_CM4_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM4_REV
+ #define __CM4_REV 0x0000
+ #warning "__CM4_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 0
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M4 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ - Core FPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISOOFP_Pos 9 /*!< ACTLR: DISOOFP Position */
+#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */
+
+#define SCnSCB_ACTLR_DISFPCA_Pos 8 /*!< ACTLR: DISFPCA Position */
+#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_FPU Floating Point Unit (FPU)
+ \brief Type definitions for the Floating Point Unit (FPU)
+ @{
+ */
+
+/** \brief Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __IO uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
+ __IO uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
+ __IO uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
+ __I uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
+ __I uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register */
+#define FPU_FPCCR_ASPEN_Pos 31 /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos 30 /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos 8 /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos 6 /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos 5 /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos 4 /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos 3 /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos 1 /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos 0 /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk (1UL << FPU_FPCCR_LSPACT_Pos) /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register */
+#define FPU_FPCAR_ADDRESS_Pos 3 /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register */
+#define FPU_FPDSCR_AHP_Pos 26 /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos 25 /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos 24 /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos 22 /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 */
+#define FPU_MVFR0_FP_rounding_modes_Pos 28 /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos 24 /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos 20 /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos 16 /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos 12 /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos 8 /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos 4 /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos 0 /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL << FPU_MVFR0_A_SIMD_registers_Pos) /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 */
+#define FPU_MVFR1_FP_fused_MAC_Pos 28 /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos 24 /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos 4 /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos 0 /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk (0xFUL << FPU_MVFR1_FtZ_mode_Pos) /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+#if (__FPU_PRESENT == 1)
+ #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
+ #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+/* NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); enable interrupt */
+ NVIC->ISER[(uint32_t)((int32_t)IRQn) >> 5] = (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM4_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC11U37H_401/core_cm4_simd.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,673 @@
+/**************************************************************************//**
+ * @file core_cm4_simd.h
+ * @brief CMSIS Cortex-M4 SIMD Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_SIMD_H
+#define __CORE_CM4_SIMD_H
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ ******************************************************************************/
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#define __SADD8 __sadd8
+#define __QADD8 __qadd8
+#define __SHADD8 __shadd8
+#define __UADD8 __uadd8
+#define __UQADD8 __uqadd8
+#define __UHADD8 __uhadd8
+#define __SSUB8 __ssub8
+#define __QSUB8 __qsub8
+#define __SHSUB8 __shsub8
+#define __USUB8 __usub8
+#define __UQSUB8 __uqsub8
+#define __UHSUB8 __uhsub8
+#define __SADD16 __sadd16
+#define __QADD16 __qadd16
+#define __SHADD16 __shadd16
+#define __UADD16 __uadd16
+#define __UQADD16 __uqadd16
+#define __UHADD16 __uhadd16
+#define __SSUB16 __ssub16
+#define __QSUB16 __qsub16
+#define __SHSUB16 __shsub16
+#define __USUB16 __usub16
+#define __UQSUB16 __uqsub16
+#define __UHSUB16 __uhsub16
+#define __SASX __sasx
+#define __QASX __qasx
+#define __SHASX __shasx
+#define __UASX __uasx
+#define __UQASX __uqasx
+#define __UHASX __uhasx
+#define __SSAX __ssax
+#define __QSAX __qsax
+#define __SHSAX __shsax
+#define __USAX __usax
+#define __UQSAX __uqsax
+#define __UHSAX __uhsax
+#define __USAD8 __usad8
+#define __USADA8 __usada8
+#define __SSAT16 __ssat16
+#define __USAT16 __usat16
+#define __UXTB16 __uxtb16
+#define __UXTAB16 __uxtab16
+#define __SXTB16 __sxtb16
+#define __SXTAB16 __sxtab16
+#define __SMUAD __smuad
+#define __SMUADX __smuadx
+#define __SMLAD __smlad
+#define __SMLADX __smladx
+#define __SMLALD __smlald
+#define __SMLALDX __smlaldx
+#define __SMUSD __smusd
+#define __SMUSDX __smusdx
+#define __SMLSD __smlsd
+#define __SMLSDX __smlsdx
+#define __SMLSLD __smlsld
+#define __SMLSLDX __smlsldx
+#define __SEL __sel
+#define __QADD __qadd
+#define __QSUB __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
+ ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
+
+#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
+ ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
+
+#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+ ((int64_t)(ARG3) << 32) ) >> 32))
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_iar.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_ccs.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLALD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLALDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLSLD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLSLDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ if (ARG3 == 0) \
+ __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
+ else \
+ __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+/* not yet supported */
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CORE_CM4_SIMD_H */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC11U37H_401/core_cmFunc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,636 @@
+/**************************************************************************//**
+ * @file core_cmFunc.h
+ * @brief CMSIS Cortex-M Core Function Access Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ register uint32_t __regIPSR __ASM("ipsr");
+ return(__regIPSR);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ register uint32_t __regXPSR __ASM("xpsr");
+ return(__regXPSR);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ return(__regProcessStackPointer);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ __regProcessStackPointer = topOfProcStack;
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ return(__regMainStackPointer);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ __regMainStackPointer = topOfMainStack;
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0xff);
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/** \brief Enable IRQ Interrupts
+
+ This function enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ uint32_t result;
+
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all instrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CMFUNC_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC11U37H_401/core_cmInstr.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,688 @@
+/**************************************************************************//**
+ * @file core_cmInstr.h
+ * @brief CMSIS Cortex-M Core Instruction Access Header File
+ * @version V3.20
+ * @date 05. March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __nop
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+#define __WFI __wfi
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __wfe
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __sev
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+#define __ISB() __isb(0xF)
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() __dsb(0xF)
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() __dmb(0xF)
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __rev
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+ rev16 r0, r0
+ bx lr
+}
+#endif
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+ revsh r0, r0
+ bx lr
+}
+#endif
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+#define __ROR __ror
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __breakpoint(value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __RBIT __rbit
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXB(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXH(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXW(value, ptr) __strex(value, ptr)
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+#define __CLREX __clrex
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT __ssat
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __usat
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __clz
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constrant "l"
+ * Otherwise, use general registers, specified by constrant "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __NOP(void)
+{
+ __ASM volatile ("nop");
+}
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFI(void)
+{
+ __ASM volatile ("wfi");
+}
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFE(void)
+{
+ __ASM volatile ("wfe");
+}
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __SEV(void)
+{
+ __ASM volatile ("sev");
+}
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ISB(void)
+{
+ __ASM volatile ("isb");
+}
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DSB(void)
+{
+ __ASM volatile ("dsb");
+}
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void)
+{
+ __ASM volatile ("dmb");
+}
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+ return __builtin_bswap32(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ return (short)__builtin_bswap16(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32 - op2));
+}
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void)
+{
+ __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC11U37H_401/power_api.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,82 @@
+/****************************************************************************
+ * $Id:: power_api.h 6249 2011-01-25 19:23:47Z usb01267 $
+ * Project: NXP LPC11Uxx software example
+ *
+ * Description:
+ * Power API Header File for NXP LPC11Uxx Device Series
+ *
+ ****************************************************************************
+ * Software that is described herein is for illustrative purposes only
+ * which provides customers with programming information regarding the
+ * products. This software is supplied "AS IS" without any warranties.
+ * NXP Semiconductors assumes no responsibility or liability for the
+ * use of the software, conveys no license or title under any patent,
+ * copyright, or mask work right to the product. NXP Semiconductors
+ * reserves the right to make changes in the software without
+ * notification. NXP Semiconductors also make no representation or
+ * warranty that such application will be suitable for the specified
+ * use without further testing or modification.
+****************************************************************************/
+#ifndef __LPC11UXX_POWER_API_H__
+#define __LPC11UXX_POWER_API_H__
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#define PWRROMD_PRESENT
+
+typedef struct _PWRD {
+ void (*set_pll)(unsigned int cmd[], unsigned int resp[]);
+ void (*set_power)(unsigned int cmd[], unsigned int resp[]);
+} PWRD;
+
+typedef struct _ROM {
+#ifdef USBROMD_PRESENT
+ const USB * pUSBD;
+#else
+ const unsigned p_usbd;
+#endif /* USBROMD_PRESENT */
+ const unsigned p_clib;
+ const unsigned p_cand;
+#ifdef PWRROMD_PRESENT
+ const PWRD * pPWRD;
+#else
+ const unsigned p_pwrd;
+#endif /* PWRROMD_PRESENT */
+ const unsigned p_dev1;
+ const unsigned p_dev2;
+ const unsigned p_dev3;
+ const unsigned p_dev4;
+} ROM;
+
+//PLL setup related definitions
+#define CPU_FREQ_EQU 0 //main PLL freq must be equal to the specified
+#define CPU_FREQ_LTE 1 //main PLL freq must be less than or equal the specified
+#define CPU_FREQ_GTE 2 //main PLL freq must be greater than or equal the specified
+#define CPU_FREQ_APPROX 3 //main PLL freq must be as close as possible the specified
+
+#define PLL_CMD_SUCCESS 0 //PLL setup successfully found
+#define PLL_INVALID_FREQ 1 //specified freq out of range (either input or output)
+#define PLL_INVALID_MODE 2 //invalid mode (see above for valid) specified
+#define PLL_FREQ_NOT_FOUND 3 //specified freq not found under specified conditions
+#define PLL_NOT_LOCKED 4 //PLL not locked => no changes to the PLL setup
+
+//power setup elated definitions
+#define PARAM_DEFAULT 0 //default power settings (voltage regulator, flash interface)
+#define PARAM_CPU_PERFORMANCE 1 //setup for maximum CPU performance (higher current, more computation)
+#define PARAM_EFFICIENCY 2 //balanced setting (power vs CPU performance)
+#define PARAM_LOW_CURRENT 3 //lowest active current, lowest CPU performance
+
+#define PARAM_CMD_SUCCESS 0 //power setting successfully found
+#define PARAM_INVALID_FREQ 1 //specified freq out of range (=0 or > 50 MHz)
+#define PARAM_INVALID_MODE 2 //specified mode not valid (see above for valid)
+
+#define MAX_CLOCK_KHZ_PARAM 50000
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __LPC11UXX_POWER_API_H__ */
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC11U37H_401/system_LPC11Uxx.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,64 @@
+/**************************************************************************//**
+ * @file system_LPC11Uxx.h
+ * @brief CMSIS Cortex-M0 Device Peripheral Access Layer Header File
+ * for the NXP LPC11Uxx Device Series
+ * @version V1.10
+ * @date 24. November 2010
+ *
+ * @note
+ * Copyright (C) 2009-2010 ARM Limited. All rights reserved.
+ *
+ * @par
+ * ARM Limited (ARM) is supplying this software for use with Cortex-M
+ * processor based microcontrollers. This file can be freely distributed
+ * within development tools that are supporting such ARM based processors.
+ *
+ * @par
+ * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
+ * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ *
+ ******************************************************************************/
+
+
+#ifndef __SYSTEM_LPC11Uxx_H
+#define __SYSTEM_LPC11Uxx_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+
+/**
+ * Initialize the system
+ *
+ * @param none
+ * @return none
+ *
+ * @brief Setup the microcontroller system.
+ * Initialize the System and update the SystemCoreClock variable.
+ */
+extern void SystemInit (void);
+
+/**
+ * Update SystemCoreClock variable
+ *
+ * @param none
+ * @return none
+ *
+ * @brief Updates the SystemCoreClock with current core Clock
+ * retrieved from cpu registers.
+ */
+extern void SystemCoreClockUpdate (void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __SYSTEM_LPC11Uxx_H */
--- a/TARGET_LPC11U68/TARGET_NXP/TARGET_LPC11U6X/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_LPC11U68/TARGET_NXP/TARGET_LPC11U6X/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -45,6 +45,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_LPC11U68/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_ARM_MICRO/startup_LPC11U6x.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_ARM_MICRO/system_LPC11U6x.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_ARM/startup_LPC11U68.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_ARM/system_LPC11U6x.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_CR/aeabi_romdiv_patch.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_CR/board.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_CR/cmsis_nvic.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_CR/mtb.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_CR/retarget.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_CR/startup_LPC11U68.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_GCC_CR/system_LPC11U6x.o has changed
--- a/TARGET_LPC11U68/TOOLCHAIN_IAR/LPC11U68.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_LPC11U68/TOOLCHAIN_IAR/LPC11U68.icf Tue Feb 03 15:31:20 2015 +0000
@@ -6,7 +6,9 @@
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0003FFFF;
-define symbol __ICFEDIT_region_RAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_NVIC_start__ = 0x10000000;
+define symbol __ICFEDIT_region_NVIC_end__ = 0x100000FF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x10000100;
define symbol __ICFEDIT_region_RAM_end__ = 0x10007FDF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
@@ -38,7 +40,7 @@
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
- block CSTACK, block HEAP };
+ block HEAP, block CSTACK };
place in CRP_region { section .crp };
place in RAM1_region { section .sram1 };
place in RAM_USB_region { section .sram_usb };
Binary file TARGET_LPC11U68/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_IAR/startup_LPC11U6X.o has changed
Binary file TARGET_LPC11U68/TOOLCHAIN_IAR/system_LPC11U6x.o has changed
--- a/TARGET_LPC1347/TARGET_NXP/TARGET_LPC13XX/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_LPC1347/TARGET_NXP/TARGET_LPC13XX/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -45,6 +45,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_LPC1347/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC1347/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC1347/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC1347/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC1347/TOOLCHAIN_ARM_STD/startup_LPC13xx.o has changed
Binary file TARGET_LPC1347/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC1347/TOOLCHAIN_ARM_STD/system_LPC13Uxx.o has changed
--- a/TARGET_LPC1347/TOOLCHAIN_IAR/LPC1347.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_LPC1347/TOOLCHAIN_IAR/LPC1347.icf Tue Feb 03 15:31:20 2015 +0000
@@ -6,7 +6,9 @@
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0000FFFF;
-define symbol __ICFEDIT_region_RAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_NVIC_start__ = 0x10000000;
+define symbol __ICFEDIT_region_NVIC_end__ = 0x100000BF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x100000C0;
define symbol __ICFEDIT_region_RAM_end__ = 0x10001FDF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x800;
@@ -38,7 +40,7 @@
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
- block CSTACK, block HEAP };
+ block HEAP, block CSTACK };
place in CRP_region { section .crp };
place in USB_PKG_RAM_region
{ readwrite data section USB_PACKET_MEMORY };
Binary file TARGET_LPC1347/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_LPC1347/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_LPC1347/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_LPC1347/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_LPC1347/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_LPC1347/TOOLCHAIN_IAR/startup_LPC1347.o has changed
Binary file TARGET_LPC1347/TOOLCHAIN_IAR/system_LPC13Uxx.o has changed
--- a/TARGET_LPC1549/TARGET_NXP/TARGET_LPC15XX/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_LPC1549/TARGET_NXP/TARGET_LPC15XX/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -46,6 +46,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_LPC1549/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_LPC1549/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_ARM_MICRO/startup_LPC15xx.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_ARM_MICRO/system_LPC15xx.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC1549/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_GCC_ARM/system_LPC15xx.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_GCC_CR/board.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_GCC_CR/cmsis_nvic.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_LPC1549/TOOLCHAIN_GCC_CR/retarget.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_GCC_CR/startup_LPC15xx.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_GCC_CR/system_LPC15xx.o has changed
--- a/TARGET_LPC1549/TOOLCHAIN_IAR/LPC15xx.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_LPC1549/TOOLCHAIN_IAR/LPC15xx.icf Tue Feb 03 15:31:20 2015 +0000
@@ -6,7 +6,9 @@
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0003FFFF;
-define symbol __ICFEDIT_region_RAM_start__ = 0x02000000;
+define symbol __ICFEDIT_region_NVIC_start__ = 0x02000000;
+define symbol __ICFEDIT_region_NVIC_end__ = 0x020000FF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x02000100;
define symbol __ICFEDIT_region_RAM_end__ = 0x02008FDF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x1000;
@@ -30,5 +32,5 @@
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
- block CSTACK, block HEAP };
+ block HEAP, block CSTACK };
place in CRP_region { section .crp };
Binary file TARGET_LPC1549/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_LPC1549/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_IAR/startup_LPC15xx.o has changed
Binary file TARGET_LPC1549/TOOLCHAIN_IAR/system_LPC15xx.o has changed
--- a/TARGET_LPC1768/TARGET_NXP/TARGET_LPC176X/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_LPC1768/TARGET_NXP/TARGET_LPC176X/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -45,6 +45,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_LPC1768/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC1768/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_ARM_STD/startup_LPC17xx.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_ARM_STD/system_LPC17xx.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_ARM/system_LPC17xx.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_CR/board.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_CR/cmsis_nvic.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_CR/retarget.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_CR/startup_LPC17xx.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_CR/system_LPC17xx.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_CS/board.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_CS/libmbed.a has changed
Binary file TARGET_LPC1768/TOOLCHAIN_GCC_CS/retarget.o has changed
--- a/TARGET_LPC1768/TOOLCHAIN_IAR/LPC17xx.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_LPC1768/TOOLCHAIN_IAR/LPC17xx.icf Tue Feb 03 15:31:20 2015 +0000
@@ -1,40 +1,44 @@
-/* [ROM] */
-define symbol __intvec_start__ = 0x00000000;
-define symbol __region_ROM_start__ = 0x00000000;
-define symbol __CRP_start__ = 0x000002FC;
-define symbol __CRP_end__ = 0x000002FF;
-define symbol __region_ROM_end__ = 0x0007FFFF;
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x0007FFFF;
+define symbol __ICFEDIT_region_NVIC_start__ = 0x10000000;
+define symbol __ICFEDIT_region_NVIC_end__ = 0x100000C7;
+define symbol __ICFEDIT_region_RAM_start__ = 0x100000C8;
+define symbol __ICFEDIT_region_RAM_end__ = 0x10007FDF;
-/* [RAM] Vector table dynamic copy: 8_byte_aligned(49 vect * 4 bytes) = 8_byte_aligned(0xC4) = 0xC8*/
-define symbol __NVIC_start__ = 0x10000000;
-define symbol __NVIC_end__ = 0x100000C7;
-define symbol __region_RAM_start__ = 0x100000C8;
-define symbol __region_RAM_end__ = 0x10007FDF;
-define symbol _AHB_RAM_start__ = 0x2007C000;
-define symbol _AHB_RAM_end__ = 0x20083FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x800;
+define symbol __ICFEDIT_size_heap__ = 0x1000;
+/**** End of ICF editor section. ###ICF###*/
-/* Memory regions */
-define memory mem with size = 4G;
+define symbol __CRP_start__ = 0x000002FC;
+define symbol __CRP_end__ = 0x000002FF;
-define region ROM_region = mem:[from __region_ROM_start__ to __region_ROM_end__] - mem:[from __CRP_start__ to __CRP_end__];
-define region CRP_region = mem:[from __CRP_start__ to __CRP_end__];
-
-define region RAM_region = mem:[from __region_RAM_start__ to __region_RAM_end__];
-define region AHB_RAM_region = mem:[from _AHB_RAM_start__ to _AHB_RAM_end__];
+define symbol __RAM1_start__ = 0x2007C000;
+define symbol __RAM1_end__ = 0x20083FFF;
-/* Stack and Heap */
-define symbol __size_cstack__ = 0x800;
-define symbol __size_heap__ = 0x800;
-define block CSTACK with alignment = 8, size = __size_cstack__ { };
-define block HEAP with alignment = 8, size = __size_heap__ { };
-define block STACKHEAP with fixed order { block HEAP, block CSTACK };
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__] - mem:[from __CRP_start__ to __CRP_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+define region CRP_region = mem:[from __CRP_start__ to __CRP_end__];
+define region RAM1_region = mem:[from __RAM1_start__ to __RAM1_end__];
-initialize by copy with packing = zeros { readwrite };
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+
+initialize by copy { readwrite };
do not initialize { section .noinit };
-place at address mem:__intvec_start__ { section .intvec };
-place at address mem:0x2FC { section CRPKEY };
-place in ROM_region { readonly };
-place in RAM_region { readwrite, block STACKHEAP };
-place in AHB_RAM_region { section USB_RAM };
-place in CRP_region { section .crp };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block HEAP, block CSTACK };
+
+place in CRP_region { section .crp };
+place in RAM1_region { section USB_RAM };
Binary file TARGET_LPC1768/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_LPC1768/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_IAR/startup_LPC17xx.o has changed
Binary file TARGET_LPC1768/TOOLCHAIN_IAR/system_LPC17xx.o has changed
--- a/TARGET_LPC2368/TARGET_NXP/TARGET_LPC23XX/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_LPC2368/TARGET_NXP/TARGET_LPC23XX/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -45,6 +45,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/core_arm7.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/system_LPC23xx.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/vector_functions.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/vector_realmonitor.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_ARM_STD/vector_table.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_GCC_ARM/core_arm7.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC2368/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_GCC_ARM/system_LPC23xx.o has changed
Binary file TARGET_LPC2368/TOOLCHAIN_GCC_ARM/vector_realmonitor.o has changed
--- a/TARGET_LPC4088/TARGET_NXP/TARGET_LPC408X/PeripheralNames.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,119 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- UART_0 = (int)LPC_UART0_BASE,
- UART_1 = (int)LPC_UART1_BASE,
- UART_2 = (int)LPC_UART2_BASE,
- UART_3 = (int)LPC_UART3_BASE,
- UART_4 = (int)LPC_UART4_BASE
-} UARTName;
-
-typedef enum {
- ADC0_0 = 0,
- ADC0_1,
- ADC0_2,
- ADC0_3,
- ADC0_4,
- ADC0_5,
- ADC0_6,
- ADC0_7
-} ADCName;
-
-typedef enum {
- DAC_0 = 0
-} DACName;
-
-typedef enum {
- SPI_0 = (int)LPC_SSP0_BASE,
- SPI_1 = (int)LPC_SSP1_BASE,
- SPI_2 = (int)LPC_SSP2_BASE
-} SPIName;
-
-typedef enum {
- I2C_0 = (int)LPC_I2C0_BASE,
- I2C_1 = (int)LPC_I2C1_BASE,
- I2C_2 = (int)LPC_I2C2_BASE
-} I2CName;
-
-typedef enum {
- PWM0_1 = 1,
- PWM0_2,
- PWM0_3,
- PWM0_4,
- PWM0_5,
- PWM0_6,
- PWM1_1,
- PWM1_2,
- PWM1_3,
- PWM1_4,
- PWM1_5,
- PWM1_6
-} PWMName;
-
-typedef enum {
- CAN_1 = (int)LPC_CAN1_BASE,
- CAN_2 = (int)LPC_CAN2_BASE
-} CANName;
-
-#define STDIO_UART_TX USBTX
-#define STDIO_UART_RX USBRX
-#define STDIO_UART UART_0
-
-// Default peripherals
-#define MBED_SPI0 p5, p6, p7
-#define MBED_SPI1 p11, p12, p13, p14
-#define MBED_SPI2 p39, p38, p32, p31
-
-#define MBED_UART3 p9, p10
-#define MBED_UART4 p37, p31
-#define MBED_UARTUSB USBTX, USBRX
-
-#define MBED_I2C0 p32, p31
-#define MBED_I2C1 p9, p10
-
-#define MBED_CAN1 p9, p10
-#define MBED_CAN2 p34, p33
-
-#define MBED_ANALOGOUT0 p18
-
-#define MBED_ANALOGIN0 p15
-#define MBED_ANALOGIN1 p16
-#define MBED_ANALOGIN2 p17
-#define MBED_ANALOGIN3 p18
-#define MBED_ANALOGIN4 p19
-#define MBED_ANALOGIN5 p20
-
-#define MBED_PWMOUT0 p30
-#define MBED_PWMOUT1 p29
-#define MBED_PWMOUT2 p28
-#define MBED_PWMOUT3 p27
-#define MBED_PWMOUT4 p26
-#define MBED_PWMOUT5 p25
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/TARGET_LPC4088/TARGET_NXP/TARGET_LPC408X/PinNames.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,130 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-#define PORT_SHIFT 5
-
-typedef enum {
- // LPC Pin Names
- P0_0 = /*LPC_GPIO0_BASE*/0,
- P0_1, P0_2, P0_3, P0_4, P0_5, P0_6, P0_7, P0_8, P0_9, P0_10, P0_11, P0_12, P0_13, P0_14, P0_15, P0_16, P0_17, P0_18, P0_19, P0_20, P0_21, P0_22, P0_23, P0_24, P0_25, P0_26, P0_27, P0_28, P0_29, P0_30, P0_31,
- P1_0, P1_1, P1_2, P1_3, P1_4, P1_5, P1_6, P1_7, P1_8, P1_9, P1_10, P1_11, P1_12, P1_13, P1_14, P1_15, P1_16, P1_17, P1_18, P1_19, P1_20, P1_21, P1_22, P1_23, P1_24, P1_25, P1_26, P1_27, P1_28, P1_29, P1_30, P1_31,
- P2_0, P2_1, P2_2, P2_3, P2_4, P2_5, P2_6, P2_7, P2_8, P2_9, P2_10, P2_11, P2_12, P2_13, P2_14, P2_15, P2_16, P2_17, P2_18, P2_19, P2_20, P2_21, P2_22, P2_23, P2_24, P2_25, P2_26, P2_27, P2_28, P2_29, P2_30, P2_31,
- P3_0, P3_1, P3_2, P3_3, P3_4, P3_5, P3_6, P3_7, P3_8, P3_9, P3_10, P3_11, P3_12, P3_13, P3_14, P3_15, P3_16, P3_17, P3_18, P3_19, P3_20, P3_21, P3_22, P3_23, P3_24, P3_25, P3_26, P3_27, P3_28, P3_29, P3_30, P3_31,
- P4_0, P4_1, P4_2, P4_3, P4_4, P4_5, P4_6, P4_7, P4_8, P4_9, P4_10, P4_11, P4_12, P4_13, P4_14, P4_15, P4_16, P4_17, P4_18, P4_19, P4_20, P4_21, P4_22, P4_23, P4_24, P4_25, P4_26, P4_27, P4_28, P4_29, P4_30, P4_31,
- P5_0, P5_1, P5_2, P5_3, P5_4,
-
- // mbed DIP Pin Names
- p5 = P1_24,
- p6 = P1_23,
- p7 = P1_20,
- p8 = P0_21,
- p9 = P0_0,
- p10 = P0_1,
- p11 = P0_9,
- p12 = P0_8,
- p13 = P0_7,
- p14 = P0_6,
- p15 = P0_23,
- p16 = P0_24,
- p17 = P0_25,
- p18 = P0_26,
- p19 = P1_30,
- p20 = P1_31,
-
- p23 = P2_10,
- p24 = P1_12,
- p25 = P1_11,
- p26 = P1_7,
- p27 = P1_6,
- p28 = P1_5,
- p29 = P1_3,
- p30 = P1_2,
- p31 = P5_3,
- p32 = P5_2,
- p33 = P0_5,
- p34 = P0_4,
-
- p37 = P5_4,
- p38 = P5_1,
- p39 = P5_0,
-
- // Other mbed Pin Names
- LED1 = P1_18,
- LED2 = P0_13,
- LED3 = P1_13,
- LED4 = P2_19,
-
- USBTX = P0_2,
- USBRX = P0_3,
-
- // QSB baseboard Arduino shield pins
- D0 = p10,
- D1 = p9,
- D2 = p31,
- D3 = p32,
- D4 = p33,
- D5 = p37,
- D6 = p38,
- D7 = p34,
- D8 = p8,
- D9 = p39,
- D10 = p14,
- D11 = p11,
- D12 = p12,
- D13 = p13,
- D14 = p19,
- D15 = p20,
-
- A0 = p15,
- A1 = p16,
- A2 = p17,
- A3 = p18,
- A4 = p19,
- A5 = p20,
-
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullUp = 2,
- PullDown = 1,
- PullNone = 0,
- OpenDrain = 4,
- PullDefault = PullDown
-} PinMode;
-
-
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC4088/TARGET_NXP/TARGET_LPC408X/TARGET_LPC4088/PeripheralNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,119 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ UART_0 = (int)LPC_UART0_BASE,
+ UART_1 = (int)LPC_UART1_BASE,
+ UART_2 = (int)LPC_UART2_BASE,
+ UART_3 = (int)LPC_UART3_BASE,
+ UART_4 = (int)LPC_UART4_BASE
+} UARTName;
+
+typedef enum {
+ ADC0_0 = 0,
+ ADC0_1,
+ ADC0_2,
+ ADC0_3,
+ ADC0_4,
+ ADC0_5,
+ ADC0_6,
+ ADC0_7
+} ADCName;
+
+typedef enum {
+ DAC_0 = 0
+} DACName;
+
+typedef enum {
+ SPI_0 = (int)LPC_SSP0_BASE,
+ SPI_1 = (int)LPC_SSP1_BASE,
+ SPI_2 = (int)LPC_SSP2_BASE
+} SPIName;
+
+typedef enum {
+ I2C_0 = (int)LPC_I2C0_BASE,
+ I2C_1 = (int)LPC_I2C1_BASE,
+ I2C_2 = (int)LPC_I2C2_BASE
+} I2CName;
+
+typedef enum {
+ PWM0_1 = 1,
+ PWM0_2,
+ PWM0_3,
+ PWM0_4,
+ PWM0_5,
+ PWM0_6,
+ PWM1_1,
+ PWM1_2,
+ PWM1_3,
+ PWM1_4,
+ PWM1_5,
+ PWM1_6
+} PWMName;
+
+typedef enum {
+ CAN_1 = (int)LPC_CAN1_BASE,
+ CAN_2 = (int)LPC_CAN2_BASE
+} CANName;
+
+#define STDIO_UART_TX USBTX
+#define STDIO_UART_RX USBRX
+#define STDIO_UART UART_0
+
+// Default peripherals
+#define MBED_SPI0 p5, p6, p7
+#define MBED_SPI1 p11, p12, p13, p14
+#define MBED_SPI2 p39, p38, p32, p31
+
+#define MBED_UART3 p9, p10
+#define MBED_UART4 p37, p31
+#define MBED_UARTUSB USBTX, USBRX
+
+#define MBED_I2C0 p32, p31
+#define MBED_I2C1 p9, p10
+
+#define MBED_CAN1 p9, p10
+#define MBED_CAN2 p34, p33
+
+#define MBED_ANALOGOUT0 p18
+
+#define MBED_ANALOGIN0 p15
+#define MBED_ANALOGIN1 p16
+#define MBED_ANALOGIN2 p17
+#define MBED_ANALOGIN3 p18
+#define MBED_ANALOGIN4 p19
+#define MBED_ANALOGIN5 p20
+
+#define MBED_PWMOUT0 p30
+#define MBED_PWMOUT1 p29
+#define MBED_PWMOUT2 p28
+#define MBED_PWMOUT3 p27
+#define MBED_PWMOUT4 p26
+#define MBED_PWMOUT5 p25
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC4088/TARGET_NXP/TARGET_LPC408X/TARGET_LPC4088/PinNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,130 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT 5
+
+typedef enum {
+ // LPC Pin Names
+ P0_0 = /*LPC_GPIO0_BASE*/0,
+ P0_1, P0_2, P0_3, P0_4, P0_5, P0_6, P0_7, P0_8, P0_9, P0_10, P0_11, P0_12, P0_13, P0_14, P0_15, P0_16, P0_17, P0_18, P0_19, P0_20, P0_21, P0_22, P0_23, P0_24, P0_25, P0_26, P0_27, P0_28, P0_29, P0_30, P0_31,
+ P1_0, P1_1, P1_2, P1_3, P1_4, P1_5, P1_6, P1_7, P1_8, P1_9, P1_10, P1_11, P1_12, P1_13, P1_14, P1_15, P1_16, P1_17, P1_18, P1_19, P1_20, P1_21, P1_22, P1_23, P1_24, P1_25, P1_26, P1_27, P1_28, P1_29, P1_30, P1_31,
+ P2_0, P2_1, P2_2, P2_3, P2_4, P2_5, P2_6, P2_7, P2_8, P2_9, P2_10, P2_11, P2_12, P2_13, P2_14, P2_15, P2_16, P2_17, P2_18, P2_19, P2_20, P2_21, P2_22, P2_23, P2_24, P2_25, P2_26, P2_27, P2_28, P2_29, P2_30, P2_31,
+ P3_0, P3_1, P3_2, P3_3, P3_4, P3_5, P3_6, P3_7, P3_8, P3_9, P3_10, P3_11, P3_12, P3_13, P3_14, P3_15, P3_16, P3_17, P3_18, P3_19, P3_20, P3_21, P3_22, P3_23, P3_24, P3_25, P3_26, P3_27, P3_28, P3_29, P3_30, P3_31,
+ P4_0, P4_1, P4_2, P4_3, P4_4, P4_5, P4_6, P4_7, P4_8, P4_9, P4_10, P4_11, P4_12, P4_13, P4_14, P4_15, P4_16, P4_17, P4_18, P4_19, P4_20, P4_21, P4_22, P4_23, P4_24, P4_25, P4_26, P4_27, P4_28, P4_29, P4_30, P4_31,
+ P5_0, P5_1, P5_2, P5_3, P5_4,
+
+ // mbed DIP Pin Names
+ p5 = P1_24,
+ p6 = P1_23,
+ p7 = P1_20,
+ p8 = P0_21,
+ p9 = P0_0,
+ p10 = P0_1,
+ p11 = P0_9,
+ p12 = P0_8,
+ p13 = P0_7,
+ p14 = P0_6,
+ p15 = P0_23,
+ p16 = P0_24,
+ p17 = P0_25,
+ p18 = P0_26,
+ p19 = P1_30,
+ p20 = P1_31,
+
+ p23 = P2_10,
+ p24 = P1_12,
+ p25 = P1_11,
+ p26 = P1_7,
+ p27 = P1_6,
+ p28 = P1_5,
+ p29 = P1_3,
+ p30 = P1_2,
+ p31 = P5_3,
+ p32 = P5_2,
+ p33 = P0_5,
+ p34 = P0_4,
+
+ p37 = P5_4,
+ p38 = P5_1,
+ p39 = P5_0,
+
+ // Other mbed Pin Names
+ LED1 = P1_18,
+ LED2 = P0_13,
+ LED3 = P1_13,
+ LED4 = P2_19,
+
+ USBTX = P0_2,
+ USBRX = P0_3,
+
+ // QSB baseboard Arduino shield pins
+ D0 = p10,
+ D1 = p9,
+ D2 = p31,
+ D3 = p32,
+ D4 = p33,
+ D5 = p37,
+ D6 = p38,
+ D7 = p34,
+ D8 = p8,
+ D9 = p39,
+ D10 = p14,
+ D11 = p11,
+ D12 = p12,
+ D13 = p13,
+ D14 = p19,
+ D15 = p20,
+
+ A0 = p15,
+ A1 = p16,
+ A2 = p17,
+ A3 = p18,
+ A4 = p19,
+ A5 = p20,
+
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullUp = 2,
+ PullDown = 1,
+ PullNone = 0,
+ OpenDrain = 4,
+ PullDefault = PullDown
+} PinMode;
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- a/TARGET_LPC4088/TARGET_NXP/TARGET_LPC408X/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_LPC4088/TARGET_NXP/TARGET_LPC408X/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -45,6 +45,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/startup_LPC407x_8x_177x_8x.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/sys_helper.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_ARM_STD/system_LPC407x_8x_177x_8x.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC4088/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_GCC_ARM/startup_LPC408x.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_GCC_ARM/system_LPC407x_8x_177x_8x.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_GCC_CR/board.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_GCC_CR/cmsis_nvic.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_LPC4088/TOOLCHAIN_GCC_CR/retarget.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_GCC_CR/startup_lpc407x_8x.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_GCC_CR/system_LPC407x_8x_177x_8x.o has changed
--- a/TARGET_LPC4088/TOOLCHAIN_IAR/LPC4088.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_LPC4088/TOOLCHAIN_IAR/LPC4088.icf Tue Feb 03 15:31:20 2015 +0000
@@ -6,7 +6,9 @@
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0007FFFF;
-define symbol __ICFEDIT_region_RAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_NVIC_start__ = 0x10000000;
+define symbol __ICFEDIT_region_NVIC_end__ = 0x100000E7;
+define symbol __ICFEDIT_region_RAM_start__ = 0x100000E8;
define symbol __ICFEDIT_region_RAM_end__ = 0x1000FFDF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x800;
@@ -34,6 +36,6 @@
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
- block CSTACK, block HEAP };
+ block HEAP, block CSTACK };
place in CRP_region { section .crp };
place in RAM1_region { section .sram };
Binary file TARGET_LPC4088/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_LPC4088/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_IAR/startup_LPC408x.o has changed
Binary file TARGET_LPC4088/TOOLCHAIN_IAR/system_LPC407x_8x_177x_8x.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC4088_DM/LPC407x_8x_177x_8x.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1523 @@
+/****************************************************************************************************//**
+* $Id$ LPC407x_8x_177x_8x.h 2012-04-25
+*//**
+ * @file LPC407x_8x_177x_8x.h
+ *
+ * @brief CMSIS Cortex-M4 Cortex-M3 Peripheral Access Layer Header File for
+ * NXP LPC407x_8x_177x_8x.
+ * @version V0.7
+ * @date 20. June 2012
+ * @author NXP MCU SW Application Team
+*
+* Copyright(C) 2012, NXP Semiconductor
+* All rights reserved.
+*
+***********************************************************************
+* Software that is described herein is for illustrative purposes only
+* which provides customers with programming information regarding the
+* products. This software is supplied "AS IS" without any warranties.
+* NXP Semiconductors assumes no responsibility or liability for the
+* use of the software, conveys no license or title under any patent,
+* copyright, or mask work right to the product. NXP Semiconductors
+* reserves the right to make changes in the software without
+* notification. NXP Semiconductors also make no representation or
+* warranty that such application will be suitable for the specified
+* use without further testing or modification.
+* Permission to use, copy, modify, and distribute this software and its
+* documentation is hereby granted, under NXP Semiconductors'
+* relevant copyright in the software, without fee, provided that it
+* is used in conjunction with NXP Semiconductors microcontrollers. This
+* copyright, permission, and disclaimer notice must appear in all copies of
+* this code.
+**********************************************************************/
+
+#ifndef __LPC407x_8x_177x_8x_H__
+#define __LPC407x_8x_177x_8x_H__
+
+#if defined(__CORTEX_M4) && !defined(CORE_M4)
+ #define CORE_M4
+#endif
+
+// ##################
+// Code Red - excluded extern "C" as unrequired
+// ##################
+#if 0
+#ifdef __cplusplus
+extern "C" {
+#endif
+#endif
+
+
+/* ------------------------- Interrupt Number Definition ------------------------ */
+
+typedef enum IRQn
+{
+/****** Cortex-M4 Processor Exceptions Numbers ***************************************************/
+ Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset */
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */
+
+/****** LPC407x_8x_177x_8x Specific Interrupt Numbers *******************************************************/
+ WDT_IRQn = 0, /*!< Watchdog Timer Interrupt */
+ TIMER0_IRQn = 1, /*!< Timer0 Interrupt */
+ TIMER1_IRQn = 2, /*!< Timer1 Interrupt */
+ TIMER2_IRQn = 3, /*!< Timer2 Interrupt */
+ TIMER3_IRQn = 4, /*!< Timer3 Interrupt */
+ UART0_IRQn = 5, /*!< UART0 Interrupt */
+ UART1_IRQn = 6, /*!< UART1 Interrupt */
+ UART2_IRQn = 7, /*!< UART2 Interrupt */
+ UART3_IRQn = 8, /*!< UART3 Interrupt */
+ PWM1_IRQn = 9, /*!< PWM1 Interrupt */
+ I2C0_IRQn = 10, /*!< I2C0 Interrupt */
+ I2C1_IRQn = 11, /*!< I2C1 Interrupt */
+ I2C2_IRQn = 12, /*!< I2C2 Interrupt */
+ Reserved0_IRQn = 13, /*!< Reserved */
+ SSP0_IRQn = 14, /*!< SSP0 Interrupt */
+ SSP1_IRQn = 15, /*!< SSP1 Interrupt */
+ PLL0_IRQn = 16, /*!< PLL0 Lock (Main PLL) Interrupt */
+ RTC_IRQn = 17, /*!< Real Time Clock Interrupt */
+ EINT0_IRQn = 18, /*!< External Interrupt 0 Interrupt */
+ EINT1_IRQn = 19, /*!< External Interrupt 1 Interrupt */
+ EINT2_IRQn = 20, /*!< External Interrupt 2 Interrupt */
+ EINT3_IRQn = 21, /*!< External Interrupt 3 Interrupt */
+ ADC_IRQn = 22, /*!< A/D Converter Interrupt */
+ BOD_IRQn = 23, /*!< Brown-Out Detect Interrupt */
+ USB_IRQn = 24, /*!< USB Interrupt */
+ CAN_IRQn = 25, /*!< CAN Interrupt */
+ DMA_IRQn = 26, /*!< General Purpose DMA Interrupt */
+ I2S_IRQn = 27, /*!< I2S Interrupt */
+ ENET_IRQn = 28, /*!< Ethernet Interrupt */
+ MCI_IRQn = 29, /*!< SD/MMC card I/F Interrupt */
+ MCPWM_IRQn = 30, /*!< Motor Control PWM Interrupt */
+ QEI_IRQn = 31, /*!< Quadrature Encoder Interface Interrupt */
+ PLL1_IRQn = 32, /*!< PLL1 Lock (USB PLL) Interrupt */
+ USBActivity_IRQn = 33, /*!< USB Activity interrupt */
+ CANActivity_IRQn = 34, /*!< CAN Activity interrupt */
+ UART4_IRQn = 35, /*!< UART4 Interrupt */
+ SSP2_IRQn = 36, /*!< SSP2 Interrupt */
+ LCD_IRQn = 37, /*!< LCD Interrupt */
+ GPIO_IRQn = 38, /*!< GPIO Interrupt */
+ PWM0_IRQn = 39, /*!< 39 PWM0 */
+ EEPROM_IRQn = 40, /*!< 40 EEPROM */
+ CMP0_IRQn = 41, /*!< 41 CMP0 */
+ CMP1_IRQn = 42 /*!< 42 CMP1 */
+} IRQn_Type;
+
+/* ================================================================================ */
+/* ================ Processor and Core Peripheral Section ================ */
+/* ================================================================================ */
+#ifdef CORE_M4
+/* ----------------Configuration of the cm4 Processor and Core Peripherals---------------- */
+#define __CM4_REV 0x0000 /*!< Cortex-M4 Core Revision */
+#define __MPU_PRESENT 1 /*!< MPU present or not */
+#define __NVIC_PRIO_BITS 5 /*!< Number of Bits used for Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+#define __FPU_PRESENT 1 /*!< FPU present or not */
+
+
+#include "core_cm4.h" /*!< Cortex-M4 processor and core peripherals */
+#else
+/* Configuration of the Cortex-M3 Processor and Core Peripherals */
+#define __MPU_PRESENT 1 /*!< MPU present or not */
+#define __NVIC_PRIO_BITS 5 /*!< Number of Bits used for Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+
+#include "core_cm3.h" /* Cortex-M3 processor and core peripherals */
+
+#endif
+
+#include "system_LPC407x_8x_177x_8x.h" /*!< LPC408x_7x System */
+
+
+
+
+
+
+/* ================================================================================ */
+/* ================ Device Specific Peripheral Section ================ */
+/* ================================================================================ */
+
+#if defined ( __CC_ARM )
+#pragma anon_unions
+#endif
+
+/*------------- General Purpose Direct Memory Access (GPDMA) -----------------*/
+typedef struct /* Common Registers */
+{
+ __I uint32_t IntStat;
+ __I uint32_t IntTCStat;
+ __O uint32_t IntTCClear;
+ __I uint32_t IntErrStat;
+ __O uint32_t IntErrClr;
+ __I uint32_t RawIntTCStat;
+ __I uint32_t RawIntErrStat;
+ __I uint32_t EnbldChns;
+ __IO uint32_t SoftBReq;
+ __IO uint32_t SoftSReq;
+ __IO uint32_t SoftLBReq;
+ __IO uint32_t SoftLSReq;
+ __IO uint32_t Config;
+ __IO uint32_t Sync;
+} LPC_GPDMA_TypeDef;
+
+typedef struct /* Channel Registers */
+{
+ __IO uint32_t CSrcAddr;
+ __IO uint32_t CDestAddr;
+ __IO uint32_t CLLI;
+ __IO uint32_t CControl;
+ __IO uint32_t CConfig;
+} LPC_GPDMACH_TypeDef;
+
+/*------------- System Control (SC) ------------------------------------------*/
+typedef struct
+{
+ __IO uint32_t FLASHCFG; /*!< Offset: 0x000 (R/W) Flash Accelerator Configuration Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t PLL0CON; /*!< Offset: 0x080 (R/W) PLL0 Control Register */
+ __IO uint32_t PLL0CFG; /*!< Offset: 0x084 (R/W) PLL0 Configuration Register */
+ __I uint32_t PLL0STAT; /*!< Offset: 0x088 (R/ ) PLL0 Status Register */
+ __O uint32_t PLL0FEED; /*!< Offset: 0x08C ( /W) PLL0 Feed Register */
+ uint32_t RESERVED1[4];
+ __IO uint32_t PLL1CON; /*!< Offset: 0x0A0 (R/W) PLL1 Control Register */
+ __IO uint32_t PLL1CFG; /*!< Offset: 0x0A4 (R/W) PLL1 Configuration Register */
+ __I uint32_t PLL1STAT; /*!< Offset: 0x0A8 (R/ ) PLL1 Status Register */
+ __O uint32_t PLL1FEED; /*!< Offset: 0x0AC ( /W) PLL1 Feed Register */
+ uint32_t RESERVED2[4];
+ __IO uint32_t PCON; /*!< Offset: 0x0C0 (R/W) Power Control Register */
+ __IO uint32_t PCONP; /*!< Offset: 0x0C4 (R/W) Power Control for Peripherals Register */
+ __IO uint32_t PCONP1; /*!< Offset: 0x0C8 (R/W) Power Control for Peripherals Register */
+ uint32_t RESERVED3[13];
+ __IO uint32_t EMCCLKSEL; /*!< Offset: 0x100 (R/W) External Memory Controller Clock Selection Register */
+ __IO uint32_t CCLKSEL; /*!< Offset: 0x104 (R/W) CPU Clock Selection Register */
+ __IO uint32_t USBCLKSEL; /*!< Offset: 0x108 (R/W) USB Clock Selection Register */
+ __IO uint32_t CLKSRCSEL; /*!< Offset: 0x10C (R/W) Clock Source Select Register */
+ __IO uint32_t CANSLEEPCLR; /*!< Offset: 0x110 (R/W) CAN Sleep Clear Register */
+ __IO uint32_t CANWAKEFLAGS; /*!< Offset: 0x114 (R/W) CAN Wake-up Flags Register */
+ uint32_t RESERVED4[10];
+ __IO uint32_t EXTINT; /*!< Offset: 0x140 (R/W) External Interrupt Flag Register */
+ uint32_t RESERVED5[1];
+ __IO uint32_t EXTMODE; /*!< Offset: 0x148 (R/W) External Interrupt Mode Register */
+ __IO uint32_t EXTPOLAR; /*!< Offset: 0x14C (R/W) External Interrupt Polarity Register */
+ uint32_t RESERVED6[12];
+ __IO uint32_t RSID; /*!< Offset: 0x180 (R/W) Reset Source Identification Register */
+ uint32_t RESERVED7[7];
+ __IO uint32_t SCS; /*!< Offset: 0x1A0 (R/W) System Controls and Status Register */
+ __IO uint32_t IRCTRIM; /*!< Offset: 0x1A4 (R/W) Clock Dividers */
+ __IO uint32_t PCLKSEL; /*!< Offset: 0x1A8 (R/W) Peripheral Clock Selection Register */
+ uint32_t RESERVED8;
+ __IO uint32_t PBOOST; /*!< Offset: 0x1B0 (R/W) Power Boost control register */
+ __IO uint32_t SPIFICLKSEL;
+ __IO uint32_t LCD_CFG; /*!< Offset: 0x1B8 (R/W) LCD Configuration and clocking control Register */
+ uint32_t RESERVED10[1];
+ __IO uint32_t USBIntSt; /*!< Offset: 0x1C0 (R/W) USB Interrupt Status Register */
+ __IO uint32_t DMAREQSEL; /*!< Offset: 0x1C4 (R/W) DMA Request Select Register */
+ __IO uint32_t CLKOUTCFG; /*!< Offset: 0x1C8 (R/W) Clock Output Configuration Register */
+ __IO uint32_t RSTCON0; /*!< Offset: 0x1CC (R/W) RESET Control0 Register */
+ __IO uint32_t RSTCON1; /*!< Offset: 0x1D0 (R/W) RESET Control1 Register */
+ uint32_t RESERVED11[2];
+ __IO uint32_t EMCDLYCTL; /*!< Offset: 0x1DC (R/W) SDRAM programmable delays */
+ __IO uint32_t EMCCAL; /*!< Offset: 0x1E0 (R/W) Calibration of programmable delays */
+ } LPC_SC_TypeDef;
+/*------------- Ethernet Media Access Controller (EMAC) ----------------------*/
+typedef struct
+{
+ __IO uint32_t MAC1; /* MAC Registers */
+ __IO uint32_t MAC2;
+ __IO uint32_t IPGT;
+ __IO uint32_t IPGR;
+ __IO uint32_t CLRT;
+ __IO uint32_t MAXF;
+ __IO uint32_t SUPP;
+ __IO uint32_t TEST;
+ __IO uint32_t MCFG;
+ __IO uint32_t MCMD;
+ __IO uint32_t MADR;
+ __O uint32_t MWTD;
+ __I uint32_t MRDD;
+ __I uint32_t MIND;
+ uint32_t RESERVED0[2];
+ __IO uint32_t SA0;
+ __IO uint32_t SA1;
+ __IO uint32_t SA2;
+ uint32_t RESERVED1[45];
+ __IO uint32_t Command; /* Control Registers */
+ __I uint32_t Status;
+ __IO uint32_t RxDescriptor;
+ __IO uint32_t RxStatus;
+ __IO uint32_t RxDescriptorNumber;
+ __I uint32_t RxProduceIndex;
+ __IO uint32_t RxConsumeIndex;
+ __IO uint32_t TxDescriptor;
+ __IO uint32_t TxStatus;
+ __IO uint32_t TxDescriptorNumber;
+ __IO uint32_t TxProduceIndex;
+ __I uint32_t TxConsumeIndex;
+ uint32_t RESERVED2[10];
+ __I uint32_t TSV0;
+ __I uint32_t TSV1;
+ __I uint32_t RSV;
+ uint32_t RESERVED3[3];
+ __IO uint32_t FlowControlCounter;
+ __I uint32_t FlowControlStatus;
+ uint32_t RESERVED4[34];
+ __IO uint32_t RxFilterCtrl; /* Rx Filter Registers */
+ __I uint32_t RxFilterWoLStatus;
+ __O uint32_t RxFilterWoLClear;
+ uint32_t RESERVED5;
+ __IO uint32_t HashFilterL;
+ __IO uint32_t HashFilterH;
+ uint32_t RESERVED6[882];
+ __I uint32_t IntStatus; /* Module Control Registers */
+ __IO uint32_t IntEnable;
+ __O uint32_t IntClear;
+ __O uint32_t IntSet;
+ uint32_t RESERVED7;
+ __IO uint32_t PowerDown;
+ uint32_t RESERVED8;
+ __IO uint32_t Module_ID;
+} LPC_EMAC_TypeDef;
+
+/*------------- LCD controller (LCD) -----------------------------------------*/
+typedef struct
+{
+ __IO uint32_t TIMH; /* LCD Registers */
+ __IO uint32_t TIMV;
+ __IO uint32_t POL;
+ __IO uint32_t LE;
+ __IO uint32_t UPBASE;
+ __IO uint32_t LPBASE;
+ __IO uint32_t CTRL;
+ __IO uint32_t INTMSK;
+ __I uint32_t INTRAW;
+ __I uint32_t INTSTAT;
+ __O uint32_t INTCLR;
+ __I uint32_t UPCURR;
+ __I uint32_t LPCURR;
+ uint32_t RESERVED0[115];
+ __IO uint32_t PAL[128];
+ uint32_t RESERVED1[256];
+ __IO uint32_t CRSR_IMG[256];
+ __IO uint32_t CRSR_CTRL;
+ __IO uint32_t CRSR_CFG;
+ __IO uint32_t CRSR_PAL0;
+ __IO uint32_t CRSR_PAL1;
+ __IO uint32_t CRSR_XY;
+ __IO uint32_t CRSR_CLIP;
+ uint32_t RESERVED2[2];
+ __IO uint32_t CRSR_INTMSK;
+ __O uint32_t CRSR_INTCLR;
+ __I uint32_t CRSR_INTRAW;
+ __I uint32_t CRSR_INTSTAT;
+} LPC_LCD_TypeDef;
+
+/*------------- Universal Serial Bus (USB) -----------------------------------*/
+typedef struct
+{
+ __I uint32_t Revision; /* USB Host Registers */
+ __IO uint32_t Control;
+ __IO uint32_t CommandStatus;
+ __IO uint32_t InterruptStatus;
+ __IO uint32_t InterruptEnable;
+ __IO uint32_t InterruptDisable;
+ __IO uint32_t HCCA;
+ __I uint32_t PeriodCurrentED;
+ __IO uint32_t ControlHeadED;
+ __IO uint32_t ControlCurrentED;
+ __IO uint32_t BulkHeadED;
+ __IO uint32_t BulkCurrentED;
+ __I uint32_t DoneHead;
+ __IO uint32_t FmInterval;
+ __I uint32_t FmRemaining;
+ __I uint32_t FmNumber;
+ __IO uint32_t PeriodicStart;
+ __IO uint32_t LSTreshold;
+ __IO uint32_t RhDescriptorA;
+ __IO uint32_t RhDescriptorB;
+ __IO uint32_t RhStatus;
+ __IO uint32_t RhPortStatus1;
+ __IO uint32_t RhPortStatus2;
+ uint32_t RESERVED0[40];
+ __I uint32_t Module_ID;
+
+ __I uint32_t IntSt; /* USB On-The-Go Registers */
+ __IO uint32_t IntEn;
+ __O uint32_t IntSet;
+ __O uint32_t IntClr;
+ __IO uint32_t StCtrl;
+ __IO uint32_t Tmr;
+ uint32_t RESERVED1[58];
+
+ __I uint32_t DevIntSt; /* USB Device Interrupt Registers */
+ __IO uint32_t DevIntEn;
+ __O uint32_t DevIntClr;
+ __O uint32_t DevIntSet;
+
+ __O uint32_t CmdCode; /* USB Device SIE Command Registers */
+ __I uint32_t CmdData;
+
+ __I uint32_t RxData; /* USB Device Transfer Registers */
+ __O uint32_t TxData;
+ __I uint32_t RxPLen;
+ __O uint32_t TxPLen;
+ __IO uint32_t Ctrl;
+ __O uint32_t DevIntPri;
+
+ __I uint32_t EpIntSt; /* USB Device Endpoint Interrupt Regs */
+ __IO uint32_t EpIntEn;
+ __O uint32_t EpIntClr;
+ __O uint32_t EpIntSet;
+ __O uint32_t EpIntPri;
+
+ __IO uint32_t ReEp; /* USB Device Endpoint Realization Reg*/
+ __O uint32_t EpInd;
+ __IO uint32_t MaxPSize;
+
+ __I uint32_t DMARSt; /* USB Device DMA Registers */
+ __O uint32_t DMARClr;
+ __O uint32_t DMARSet;
+ uint32_t RESERVED2[9];
+ __IO uint32_t UDCAH;
+ __I uint32_t EpDMASt;
+ __O uint32_t EpDMAEn;
+ __O uint32_t EpDMADis;
+ __I uint32_t DMAIntSt;
+ __IO uint32_t DMAIntEn;
+ uint32_t RESERVED3[2];
+ __I uint32_t EoTIntSt;
+ __O uint32_t EoTIntClr;
+ __O uint32_t EoTIntSet;
+ __I uint32_t NDDRIntSt;
+ __O uint32_t NDDRIntClr;
+ __O uint32_t NDDRIntSet;
+ __I uint32_t SysErrIntSt;
+ __O uint32_t SysErrIntClr;
+ __O uint32_t SysErrIntSet;
+ uint32_t RESERVED4[15];
+
+ union {
+ __I uint32_t I2C_RX; /* USB OTG I2C Registers */
+ __O uint32_t I2C_TX;
+ };
+ __IO uint32_t I2C_STS;
+ __IO uint32_t I2C_CTL;
+ __IO uint32_t I2C_CLKHI;
+ __O uint32_t I2C_CLKLO;
+ uint32_t RESERVED5[824];
+
+ union {
+ __IO uint32_t USBClkCtrl; /* USB Clock Control Registers */
+ __IO uint32_t OTGClkCtrl;
+ };
+ union {
+ __I uint32_t USBClkSt;
+ __I uint32_t OTGClkSt;
+ };
+} LPC_USB_TypeDef;
+
+/*------------- CRC Engine (CRC) -----------------------------------------*/
+typedef struct
+{
+ __IO uint32_t MODE;
+ __IO uint32_t SEED;
+ union {
+ __I uint32_t SUM;
+ struct {
+ __O uint32_t DATA;
+ } WR_DATA_DWORD;
+
+ struct {
+ __O uint16_t DATA;
+ uint16_t RESERVED;
+ }WR_DATA_WORD;
+
+ struct {
+ __O uint8_t DATA;
+ uint8_t RESERVED[3];
+ }WR_DATA_BYTE;
+ };
+} LPC_CRC_TypeDef;
+/*------------- General Purpose Input/Output (GPIO) --------------------------*/
+typedef struct
+{
+ __IO uint32_t DIR;
+ uint32_t RESERVED0[3];
+ __IO uint32_t MASK;
+ __IO uint32_t PIN;
+ __IO uint32_t SET;
+ __O uint32_t CLR;
+} LPC_GPIO_TypeDef;
+
+typedef struct
+{
+ __I uint32_t IntStatus;
+ __I uint32_t IO0IntStatR;
+ __I uint32_t IO0IntStatF;
+ __O uint32_t IO0IntClr;
+ __IO uint32_t IO0IntEnR;
+ __IO uint32_t IO0IntEnF;
+ uint32_t RESERVED0[3];
+ __I uint32_t IO2IntStatR;
+ __I uint32_t IO2IntStatF;
+ __O uint32_t IO2IntClr;
+ __IO uint32_t IO2IntEnR;
+ __IO uint32_t IO2IntEnF;
+} LPC_GPIOINT_TypeDef;
+
+/*------------- External Memory Controller (EMC) -----------------------------*/
+typedef struct
+{
+ __IO uint32_t Control;
+ __I uint32_t Status;
+ __IO uint32_t Config;
+ uint32_t RESERVED0[5];
+ __IO uint32_t DynamicControl;
+ __IO uint32_t DynamicRefresh;
+ __IO uint32_t DynamicReadConfig;
+ uint32_t RESERVED1[1];
+ __IO uint32_t DynamicRP;
+ __IO uint32_t DynamicRAS;
+ __IO uint32_t DynamicSREX;
+ __IO uint32_t DynamicAPR;
+ __IO uint32_t DynamicDAL;
+ __IO uint32_t DynamicWR;
+ __IO uint32_t DynamicRC;
+ __IO uint32_t DynamicRFC;
+ __IO uint32_t DynamicXSR;
+ __IO uint32_t DynamicRRD;
+ __IO uint32_t DynamicMRD;
+ uint32_t RESERVED2[9];
+ __IO uint32_t StaticExtendedWait;
+ uint32_t RESERVED3[31];
+ __IO uint32_t DynamicConfig0;
+ __IO uint32_t DynamicRasCas0;
+ uint32_t RESERVED4[6];
+ __IO uint32_t DynamicConfig1;
+ __IO uint32_t DynamicRasCas1;
+ uint32_t RESERVED5[6];
+ __IO uint32_t DynamicConfig2;
+ __IO uint32_t DynamicRasCas2;
+ uint32_t RESERVED6[6];
+ __IO uint32_t DynamicConfig3;
+ __IO uint32_t DynamicRasCas3;
+ uint32_t RESERVED7[38];
+ __IO uint32_t StaticConfig0;
+ __IO uint32_t StaticWaitWen0;
+ __IO uint32_t StaticWaitOen0;
+ __IO uint32_t StaticWaitRd0;
+ __IO uint32_t StaticWaitPage0;
+ __IO uint32_t StaticWaitWr0;
+ __IO uint32_t StaticWaitTurn0;
+ uint32_t RESERVED8[1];
+ __IO uint32_t StaticConfig1;
+ __IO uint32_t StaticWaitWen1;
+ __IO uint32_t StaticWaitOen1;
+ __IO uint32_t StaticWaitRd1;
+ __IO uint32_t StaticWaitPage1;
+ __IO uint32_t StaticWaitWr1;
+ __IO uint32_t StaticWaitTurn1;
+ uint32_t RESERVED9[1];
+ __IO uint32_t StaticConfig2;
+ __IO uint32_t StaticWaitWen2;
+ __IO uint32_t StaticWaitOen2;
+ __IO uint32_t StaticWaitRd2;
+ __IO uint32_t StaticWaitPage2;
+ __IO uint32_t StaticWaitWr2;
+ __IO uint32_t StaticWaitTurn2;
+ uint32_t RESERVED10[1];
+ __IO uint32_t StaticConfig3;
+ __IO uint32_t StaticWaitWen3;
+ __IO uint32_t StaticWaitOen3;
+ __IO uint32_t StaticWaitRd3;
+ __IO uint32_t StaticWaitPage3;
+ __IO uint32_t StaticWaitWr3;
+ __IO uint32_t StaticWaitTurn3;
+} LPC_EMC_TypeDef;
+
+/*------------- Watchdog Timer (WDT) -----------------------------------------*/
+typedef struct
+{
+ __IO uint8_t MOD;
+ uint8_t RESERVED0[3];
+ __IO uint32_t TC;
+ __O uint8_t FEED;
+ uint8_t RESERVED1[3];
+ __I uint32_t TV;
+ uint32_t RESERVED2;
+ __IO uint32_t WARNINT;
+ __IO uint32_t WINDOW;
+} LPC_WDT_TypeDef;
+
+/*------------- Timer (TIM) --------------------------------------------------*/
+typedef struct
+{
+ __IO uint32_t IR; /*!< Offset: 0x000 Interrupt Register (R/W) */
+ __IO uint32_t TCR; /*!< Offset: 0x004 Timer Control Register (R/W) */
+ __IO uint32_t TC; /*!< Offset: 0x008 Timer Counter Register (R/W) */
+ __IO uint32_t PR; /*!< Offset: 0x00C Prescale Register (R/W) */
+ __IO uint32_t PC; /*!< Offset: 0x010 Prescale Counter Register (R/W) */
+ __IO uint32_t MCR; /*!< Offset: 0x014 Match Control Register (R/W) */
+ __IO uint32_t MR0; /*!< Offset: 0x018 Match Register 0 (R/W) */
+ __IO uint32_t MR1; /*!< Offset: 0x01C Match Register 1 (R/W) */
+ __IO uint32_t MR2; /*!< Offset: 0x020 Match Register 2 (R/W) */
+ __IO uint32_t MR3; /*!< Offset: 0x024 Match Register 3 (R/W) */
+ __IO uint32_t CCR; /*!< Offset: 0x028 Capture Control Register (R/W) */
+ __I uint32_t CR0; /*!< Offset: 0x02C Capture Register 0 (R/ ) */
+ __I uint32_t CR1; /*!< Offset: 0x030 Capture Register 1 (R/ ) */
+ uint32_t RESERVED0[2];
+ __IO uint32_t EMR; /*!< Offset: 0x03C External Match Register (R/W) */
+ uint32_t RESERVED1[12];
+ __IO uint32_t CTCR; /*!< Offset: 0x070 Count Control Register (R/W) */
+} LPC_TIM_TypeDef;
+
+
+/*------------- Pulse-Width Modulation (PWM) ---------------------------------*/
+typedef struct
+{
+ __IO uint32_t IR; /*!< Offset: 0x000 Interrupt Register (R/W) */
+ __IO uint32_t TCR; /*!< Offset: 0x004 Timer Control Register (R/W) */
+ __IO uint32_t TC; /*!< Offset: 0x008 Timer Counter Register (R/W) */
+ __IO uint32_t PR; /*!< Offset: 0x00C Prescale Register (R/W) */
+ __IO uint32_t PC; /*!< Offset: 0x010 Prescale Counter Register (R/W) */
+ __IO uint32_t MCR; /*!< Offset: 0x014 Match Control Register (R/W) */
+ __IO uint32_t MR0; /*!< Offset: 0x018 Match Register 0 (R/W) */
+ __IO uint32_t MR1; /*!< Offset: 0x01C Match Register 1 (R/W) */
+ __IO uint32_t MR2; /*!< Offset: 0x020 Match Register 2 (R/W) */
+ __IO uint32_t MR3; /*!< Offset: 0x024 Match Register 3 (R/W) */
+ __IO uint32_t CCR; /*!< Offset: 0x028 Capture Control Register (R/W) */
+ __I uint32_t CR0; /*!< Offset: 0x02C Capture Register 0 (R/ ) */
+ __I uint32_t CR1; /*!< Offset: 0x030 Capture Register 1 (R/ ) */
+ __I uint32_t CR2; /*!< Offset: 0x034 Capture Register 2 (R/ ) */
+ __I uint32_t CR3; /*!< Offset: 0x038 Capture Register 3 (R/ ) */
+ uint32_t RESERVED0;
+ __IO uint32_t MR4; /*!< Offset: 0x040 Match Register 4 (R/W) */
+ __IO uint32_t MR5; /*!< Offset: 0x044 Match Register 5 (R/W) */
+ __IO uint32_t MR6; /*!< Offset: 0x048 Match Register 6 (R/W) */
+ __IO uint32_t PCR; /*!< Offset: 0x04C PWM Control Register (R/W) */
+ __IO uint32_t LER; /*!< Offset: 0x050 Load Enable Register (R/W) */
+ uint32_t RESERVED1[7];
+ __IO uint32_t CTCR; /*!< Offset: 0x070 Counter Control Register (R/W) */
+} LPC_PWM_TypeDef;
+
+/*------------- Universal Asynchronous Receiver Transmitter (UARTx) -----------*/
+/* There are three types of UARTs on the chip:
+(1) UART0,UART2, and UART3 are the standard UART.
+(2) UART1 is the standard with modem capability.
+(3) USART(UART4) is the sync/async UART with smart card capability.
+More details can be found on the Users Manual. */
+
+#if 0
+typedef struct
+{
+ union {
+ __I uint8_t RBR;
+ __O uint8_t THR;
+ __IO uint8_t DLL;
+ uint32_t RESERVED0;
+ };
+ union {
+ __IO uint8_t DLM;
+ __IO uint32_t IER;
+ };
+ union {
+ __I uint32_t IIR;
+ __O uint8_t FCR;
+ };
+ __IO uint8_t LCR;
+ uint8_t RESERVED1[7];
+ __I uint8_t LSR;
+ uint8_t RESERVED2[7];
+ __IO uint8_t SCR;
+ uint8_t RESERVED3[3];
+ __IO uint32_t ACR;
+ __IO uint8_t ICR;
+ uint8_t RESERVED4[3];
+ __IO uint8_t FDR;
+ uint8_t RESERVED5[7];
+ __IO uint8_t TER;
+ uint8_t RESERVED6[39];
+ __I uint8_t FIFOLVL;
+} LPC_UART_TypeDef;
+#else
+typedef struct
+{
+ union
+ {
+ __I uint8_t RBR;
+ __O uint8_t THR;
+ __IO uint8_t DLL;
+ uint32_t RESERVED0;
+ };
+ union
+ {
+ __IO uint8_t DLM;
+ __IO uint32_t IER;
+ };
+ union
+ {
+ __I uint32_t IIR;
+ __O uint8_t FCR;
+ };
+ __IO uint8_t LCR;
+ uint8_t RESERVED1[7];//Reserved
+ __I uint8_t LSR;
+ uint8_t RESERVED2[7];//Reserved
+ __IO uint8_t SCR;
+ uint8_t RESERVED3[3];//Reserved
+ __IO uint32_t ACR;
+ __IO uint8_t ICR;
+ uint8_t RESERVED4[3];//Reserved
+ __IO uint8_t FDR;
+ uint8_t RESERVED5[7];//Reserved
+ __IO uint8_t TER;
+ uint8_t RESERVED8[27];//Reserved
+ __IO uint8_t RS485CTRL;
+ uint8_t RESERVED9[3];//Reserved
+ __IO uint8_t ADRMATCH;
+ uint8_t RESERVED10[3];//Reserved
+ __IO uint8_t RS485DLY;
+ uint8_t RESERVED11[3];//Reserved
+ __I uint8_t FIFOLVL;
+}LPC_UART_TypeDef;
+#endif
+
+
+typedef struct
+{
+ union {
+ __I uint8_t RBR;
+ __O uint8_t THR;
+ __IO uint8_t DLL;
+ uint32_t RESERVED0;
+ };
+ union {
+ __IO uint8_t DLM;
+ __IO uint32_t IER;
+ };
+ union {
+ __I uint32_t IIR;
+ __O uint8_t FCR;
+ };
+ __IO uint8_t LCR;
+ uint8_t RESERVED1[3];
+ __IO uint8_t MCR;
+ uint8_t RESERVED2[3];
+ __I uint8_t LSR;
+ uint8_t RESERVED3[3];
+ __I uint8_t MSR;
+ uint8_t RESERVED4[3];
+ __IO uint8_t SCR;
+ uint8_t RESERVED5[3];
+ __IO uint32_t ACR;
+ uint32_t RESERVED6;
+ __IO uint32_t FDR;
+ uint32_t RESERVED7;
+ __IO uint8_t TER;
+ uint8_t RESERVED8[27];
+ __IO uint8_t RS485CTRL;
+ uint8_t RESERVED9[3];
+ __IO uint8_t ADRMATCH;
+ uint8_t RESERVED10[3];
+ __IO uint8_t RS485DLY;
+ uint8_t RESERVED11[3];
+ __I uint8_t FIFOLVL;
+} LPC_UART1_TypeDef;
+
+typedef struct
+{
+ union {
+ __I uint32_t RBR; /*!< Offset: 0x000 Receiver Buffer Register (R/ ) */
+ __O uint32_t THR; /*!< Offset: 0x000 Transmit Holding Register ( /W) */
+ __IO uint32_t DLL; /*!< Offset: 0x000 Divisor Latch LSB (R/W) */
+ };
+ union {
+ __IO uint32_t DLM; /*!< Offset: 0x004 Divisor Latch MSB (R/W) */
+ __IO uint32_t IER; /*!< Offset: 0x000 Interrupt Enable Register (R/W) */
+ };
+ union {
+ __I uint32_t IIR; /*!< Offset: 0x008 Interrupt ID Register (R/ ) */
+ __O uint32_t FCR; /*!< Offset: 0x008 FIFO Control Register ( /W) */
+ };
+ __IO uint32_t LCR; /*!< Offset: 0x00C Line Control Register (R/W) */
+ __IO uint32_t MCR; /*!< Offset: 0x010 Modem control Register (R/W) */
+ __I uint32_t LSR; /*!< Offset: 0x014 Line Status Register (R/ ) */
+ __I uint32_t MSR; /*!< Offset: 0x018 Modem status Register (R/ ) */
+ __IO uint32_t SCR; /*!< Offset: 0x01C Scratch Pad Register (R/W) */
+ __IO uint32_t ACR; /*!< Offset: 0x020 Auto-baud Control Register (R/W) */
+ __IO uint32_t ICR; /*!< Offset: 0x024 irDA Control Register (R/W) */
+ __IO uint32_t FDR; /*!< Offset: 0x028 Fractional Divider Register (R/W) */
+ __IO uint32_t OSR; /*!< Offset: 0x02C Over sampling Register (R/W) */
+ __O uint32_t POP; /*!< Offset: 0x030 NHP Pop Register (W) */
+ __IO uint32_t MODE; /*!< Offset: 0x034 NHP Mode selection Register (W) */
+ uint32_t RESERVED0[2];
+ __IO uint32_t HDEN; /*!< Offset: 0x040 Half duplex Enable Register (R/W) */
+ uint32_t RESERVED1;
+ __IO uint32_t SCI_CTRL; /*!< Offset: 0x048 Smart card Interface Control Register (R/W) */
+ __IO uint32_t RS485CTRL; /*!< Offset: 0x04C RS-485/EIA-485 Control Register (R/W) */
+ __IO uint32_t ADRMATCH; /*!< Offset: 0x050 RS-485/EIA-485 address match Register (R/W) */
+ __IO uint32_t RS485DLY; /*!< Offset: 0x054 RS-485/EIA-485 direction control delay Register (R/W) */
+ __IO uint32_t SYNCCTRL; /*!< Offset: 0x058 Synchronous Mode Control Register (R/W ) */
+ __IO uint32_t TER; /*!< Offset: 0x05C Transmit Enable Register (R/W) */
+ uint32_t RESERVED2[989];
+ __I uint32_t CFG; /*!< Offset: 0xFD4 Configuration Register (R) */
+ __O uint32_t INTCE; /*!< Offset: 0xFD8 Interrupt Clear Enable Register (W) */
+ __O uint32_t INTSE; /*!< Offset: 0xFDC Interrupt Set Enable Register (W) */
+ __I uint32_t INTS; /*!< Offset: 0xFE0 Interrupt Status Register (R) */
+ __I uint32_t INTE; /*!< Offset: 0xFE4 Interrupt Enable Register (R) */
+ __O uint32_t INTCS; /*!< Offset: 0xFE8 Interrupt Clear Status Register (W) */
+ __O uint32_t INTSS; /*!< Offset: 0xFEC Interrupt Set Status Register (W) */
+ uint32_t RESERVED3[3];
+ __I uint32_t MID; /*!< Offset: 0xFFC Module Identification Register (R) */
+} LPC_UART4_TypeDef;
+/*------------- Inter-Integrated Circuit (I2C) -------------------------------*/
+typedef struct
+{
+ __IO uint32_t CONSET; /*!< Offset: 0x000 I2C Control Set Register (R/W) */
+ __I uint32_t STAT; /*!< Offset: 0x004 I2C Status Register (R/ ) */
+ __IO uint32_t DAT; /*!< Offset: 0x008 I2C Data Register (R/W) */
+ __IO uint32_t ADR0; /*!< Offset: 0x00C I2C Slave Address Register 0 (R/W) */
+ __IO uint32_t SCLH; /*!< Offset: 0x010 SCH Duty Cycle Register High Half Word (R/W) */
+ __IO uint32_t SCLL; /*!< Offset: 0x014 SCL Duty Cycle Register Low Half Word (R/W) */
+ __O uint32_t CONCLR; /*!< Offset: 0x018 I2C Control Clear Register ( /W) */
+ __IO uint32_t MMCTRL; /*!< Offset: 0x01C Monitor mode control register (R/W) */
+ __IO uint32_t ADR1; /*!< Offset: 0x020 I2C Slave Address Register 1 (R/W) */
+ __IO uint32_t ADR2; /*!< Offset: 0x024 I2C Slave Address Register 2 (R/W) */
+ __IO uint32_t ADR3; /*!< Offset: 0x028 I2C Slave Address Register 3 (R/W) */
+ __I uint32_t DATA_BUFFER; /*!< Offset: 0x02C Data buffer register ( /W) */
+ __IO uint32_t MASK0; /*!< Offset: 0x030 I2C Slave address mask register 0 (R/W) */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 I2C Slave address mask register 1 (R/W) */
+ __IO uint32_t MASK2; /*!< Offset: 0x038 I2C Slave address mask register 2 (R/W) */
+ __IO uint32_t MASK3; /*!< Offset: 0x03C I2C Slave address mask register 3 (R/W) */
+} LPC_I2C_TypeDef;
+
+/*------------- Real-Time Clock (RTC) ----------------------------------------*/
+typedef struct
+{
+ __IO uint8_t ILR;
+ uint8_t RESERVED0[7];
+ __IO uint8_t CCR;
+ uint8_t RESERVED1[3];
+ __IO uint8_t CIIR;
+ uint8_t RESERVED2[3];
+ __IO uint8_t AMR;
+ uint8_t RESERVED3[3];
+ __I uint32_t CTIME0;
+ __I uint32_t CTIME1;
+ __I uint32_t CTIME2;
+ __IO uint8_t SEC;
+ uint8_t RESERVED4[3];
+ __IO uint8_t MIN;
+ uint8_t RESERVED5[3];
+ __IO uint8_t HOUR;
+ uint8_t RESERVED6[3];
+ __IO uint8_t DOM;
+ uint8_t RESERVED7[3];
+ __IO uint8_t DOW;
+ uint8_t RESERVED8[3];
+ __IO uint16_t DOY;
+ uint16_t RESERVED9;
+ __IO uint8_t MONTH;
+ uint8_t RESERVED10[3];
+ __IO uint16_t YEAR;
+ uint16_t RESERVED11;
+ __IO uint32_t CALIBRATION;
+ __IO uint32_t GPREG0;
+ __IO uint32_t GPREG1;
+ __IO uint32_t GPREG2;
+ __IO uint32_t GPREG3;
+ __IO uint32_t GPREG4;
+ __IO uint8_t RTC_AUXEN;
+ uint8_t RESERVED12[3];
+ __IO uint8_t RTC_AUX;
+ uint8_t RESERVED13[3];
+ __IO uint8_t ALSEC;
+ uint8_t RESERVED14[3];
+ __IO uint8_t ALMIN;
+ uint8_t RESERVED15[3];
+ __IO uint8_t ALHOUR;
+ uint8_t RESERVED16[3];
+ __IO uint8_t ALDOM;
+ uint8_t RESERVED17[3];
+ __IO uint8_t ALDOW;
+ uint8_t RESERVED18[3];
+ __IO uint16_t ALDOY;
+ uint16_t RESERVED19;
+ __IO uint8_t ALMON;
+ uint8_t RESERVED20[3];
+ __IO uint16_t ALYEAR;
+ uint16_t RESERVED21;
+ __IO uint32_t ERSTATUS;
+ __IO uint32_t ERCONTROL;
+ __IO uint32_t ERCOUNTERS;
+ uint32_t RESERVED22;
+ __IO uint32_t ERFIRSTSTAMP0;
+ __IO uint32_t ERFIRSTSTAMP1;
+ __IO uint32_t ERFIRSTSTAMP2;
+ uint32_t RESERVED23;
+ __IO uint32_t ERLASTSTAMP0;
+ __IO uint32_t ERLASTSTAMP1;
+ __IO uint32_t ERLASTSTAMP2;
+} LPC_RTC_TypeDef;
+
+
+
+/*------------- Pin Connect Block (PINCON) -----------------------------------*/
+typedef struct
+{
+ __IO uint32_t P0_0; /* 0x000 */
+ __IO uint32_t P0_1;
+ __IO uint32_t P0_2;
+ __IO uint32_t P0_3;
+ __IO uint32_t P0_4;
+ __IO uint32_t P0_5;
+ __IO uint32_t P0_6;
+ __IO uint32_t P0_7;
+
+ __IO uint32_t P0_8; /* 0x020 */
+ __IO uint32_t P0_9;
+ __IO uint32_t P0_10;
+ __IO uint32_t P0_11;
+ __IO uint32_t P0_12;
+ __IO uint32_t P0_13;
+ __IO uint32_t P0_14;
+ __IO uint32_t P0_15;
+
+ __IO uint32_t P0_16; /* 0x040 */
+ __IO uint32_t P0_17;
+ __IO uint32_t P0_18;
+ __IO uint32_t P0_19;
+ __IO uint32_t P0_20;
+ __IO uint32_t P0_21;
+ __IO uint32_t P0_22;
+ __IO uint32_t P0_23;
+
+ __IO uint32_t P0_24; /* 0x060 */
+ __IO uint32_t P0_25;
+ __IO uint32_t P0_26;
+ __IO uint32_t P0_27;
+ __IO uint32_t P0_28;
+ __IO uint32_t P0_29;
+ __IO uint32_t P0_30;
+ __IO uint32_t P0_31;
+
+ __IO uint32_t P1_0; /* 0x080 */
+ __IO uint32_t P1_1;
+ __IO uint32_t P1_2;
+ __IO uint32_t P1_3;
+ __IO uint32_t P1_4;
+ __IO uint32_t P1_5;
+ __IO uint32_t P1_6;
+ __IO uint32_t P1_7;
+
+ __IO uint32_t P1_8; /* 0x0A0 */
+ __IO uint32_t P1_9;
+ __IO uint32_t P1_10;
+ __IO uint32_t P1_11;
+ __IO uint32_t P1_12;
+ __IO uint32_t P1_13;
+ __IO uint32_t P1_14;
+ __IO uint32_t P1_15;
+
+ __IO uint32_t P1_16; /* 0x0C0 */
+ __IO uint32_t P1_17;
+ __IO uint32_t P1_18;
+ __IO uint32_t P1_19;
+ __IO uint32_t P1_20;
+ __IO uint32_t P1_21;
+ __IO uint32_t P1_22;
+ __IO uint32_t P1_23;
+
+ __IO uint32_t P1_24; /* 0x0E0 */
+ __IO uint32_t P1_25;
+ __IO uint32_t P1_26;
+ __IO uint32_t P1_27;
+ __IO uint32_t P1_28;
+ __IO uint32_t P1_29;
+ __IO uint32_t P1_30;
+ __IO uint32_t P1_31;
+
+ __IO uint32_t P2_0; /* 0x100 */
+ __IO uint32_t P2_1;
+ __IO uint32_t P2_2;
+ __IO uint32_t P2_3;
+ __IO uint32_t P2_4;
+ __IO uint32_t P2_5;
+ __IO uint32_t P2_6;
+ __IO uint32_t P2_7;
+
+ __IO uint32_t P2_8; /* 0x120 */
+ __IO uint32_t P2_9;
+ __IO uint32_t P2_10;
+ __IO uint32_t P2_11;
+ __IO uint32_t P2_12;
+ __IO uint32_t P2_13;
+ __IO uint32_t P2_14;
+ __IO uint32_t P2_15;
+
+ __IO uint32_t P2_16; /* 0x140 */
+ __IO uint32_t P2_17;
+ __IO uint32_t P2_18;
+ __IO uint32_t P2_19;
+ __IO uint32_t P2_20;
+ __IO uint32_t P2_21;
+ __IO uint32_t P2_22;
+ __IO uint32_t P2_23;
+
+ __IO uint32_t P2_24; /* 0x160 */
+ __IO uint32_t P2_25;
+ __IO uint32_t P2_26;
+ __IO uint32_t P2_27;
+ __IO uint32_t P2_28;
+ __IO uint32_t P2_29;
+ __IO uint32_t P2_30;
+ __IO uint32_t P2_31;
+
+ __IO uint32_t P3_0; /* 0x180 */
+ __IO uint32_t P3_1;
+ __IO uint32_t P3_2;
+ __IO uint32_t P3_3;
+ __IO uint32_t P3_4;
+ __IO uint32_t P3_5;
+ __IO uint32_t P3_6;
+ __IO uint32_t P3_7;
+
+ __IO uint32_t P3_8; /* 0x1A0 */
+ __IO uint32_t P3_9;
+ __IO uint32_t P3_10;
+ __IO uint32_t P3_11;
+ __IO uint32_t P3_12;
+ __IO uint32_t P3_13;
+ __IO uint32_t P3_14;
+ __IO uint32_t P3_15;
+
+ __IO uint32_t P3_16; /* 0x1C0 */
+ __IO uint32_t P3_17;
+ __IO uint32_t P3_18;
+ __IO uint32_t P3_19;
+ __IO uint32_t P3_20;
+ __IO uint32_t P3_21;
+ __IO uint32_t P3_22;
+ __IO uint32_t P3_23;
+
+ __IO uint32_t P3_24; /* 0x1E0 */
+ __IO uint32_t P3_25;
+ __IO uint32_t P3_26;
+ __IO uint32_t P3_27;
+ __IO uint32_t P3_28;
+ __IO uint32_t P3_29;
+ __IO uint32_t P3_30;
+ __IO uint32_t P3_31;
+
+ __IO uint32_t P4_0; /* 0x200 */
+ __IO uint32_t P4_1;
+ __IO uint32_t P4_2;
+ __IO uint32_t P4_3;
+ __IO uint32_t P4_4;
+ __IO uint32_t P4_5;
+ __IO uint32_t P4_6;
+ __IO uint32_t P4_7;
+
+ __IO uint32_t P4_8; /* 0x220 */
+ __IO uint32_t P4_9;
+ __IO uint32_t P4_10;
+ __IO uint32_t P4_11;
+ __IO uint32_t P4_12;
+ __IO uint32_t P4_13;
+ __IO uint32_t P4_14;
+ __IO uint32_t P4_15;
+
+ __IO uint32_t P4_16; /* 0x240 */
+ __IO uint32_t P4_17;
+ __IO uint32_t P4_18;
+ __IO uint32_t P4_19;
+ __IO uint32_t P4_20;
+ __IO uint32_t P4_21;
+ __IO uint32_t P4_22;
+ __IO uint32_t P4_23;
+
+ __IO uint32_t P4_24; /* 0x260 */
+ __IO uint32_t P4_25;
+ __IO uint32_t P4_26;
+ __IO uint32_t P4_27;
+ __IO uint32_t P4_28;
+ __IO uint32_t P4_29;
+ __IO uint32_t P4_30;
+ __IO uint32_t P4_31;
+
+ __IO uint32_t P5_0; /* 0x280 */
+ __IO uint32_t P5_1;
+ __IO uint32_t P5_2;
+ __IO uint32_t P5_3;
+ __IO uint32_t P5_4; /* 0x290 */
+} LPC_IOCON_TypeDef;
+
+
+
+
+
+
+/*------------- Synchronous Serial Communication (SSP) -----------------------*/
+typedef struct
+{
+ __IO uint32_t CR0; /*!< Offset: 0x000 Control Register 0 (R/W) */
+ __IO uint32_t CR1; /*!< Offset: 0x004 Control Register 1 (R/W) */
+ __IO uint32_t DR; /*!< Offset: 0x008 Data Register (R/W) */
+ __I uint32_t SR; /*!< Offset: 0x00C Status Registe (R/ ) */
+ __IO uint32_t CPSR; /*!< Offset: 0x010 Clock Prescale Register (R/W) */
+ __IO uint32_t IMSC; /*!< Offset: 0x014 Interrupt Mask Set and Clear Register (R/W) */
+ __IO uint32_t RIS; /*!< Offset: 0x018 Raw Interrupt Status Register (R/W) */
+ __IO uint32_t MIS; /*!< Offset: 0x01C Masked Interrupt Status Register (R/W) */
+ __IO uint32_t ICR; /*!< Offset: 0x020 SSPICR Interrupt Clear Register (R/W) */
+ __IO uint32_t DMACR;
+} LPC_SSP_TypeDef;
+
+/*------------- Analog-to-Digital Converter (ADC) ----------------------------*/
+typedef struct
+{
+ __IO uint32_t CR; /*!< Offset: 0x000 A/D Control Register (R/W) */
+ __IO uint32_t GDR; /*!< Offset: 0x004 A/D Global Data Register (R/W) */
+ uint32_t RESERVED0;
+ __IO uint32_t INTEN; /*!< Offset: 0x00C A/D Interrupt Enable Register (R/W) */
+ __IO uint32_t DR[8]; /*!< Offset: 0x010-0x02C A/D Channel 0..7 Data Register (R/W) */
+ __I uint32_t STAT; /*!< Offset: 0x030 A/D Status Register (R/ ) */
+ __IO uint32_t ADTRM;
+} LPC_ADC_TypeDef;
+
+/*------------- Controller Area Network (CAN) --------------------------------*/
+typedef struct
+{
+ __IO uint32_t mask[512]; /* ID Masks */
+} LPC_CANAF_RAM_TypeDef;
+
+typedef struct /* Acceptance Filter Registers */
+{
+ ///Offset: 0x00000000 - Acceptance Filter Register
+ __IO uint32_t AFMR;
+
+ ///Offset: 0x00000004 - Standard Frame Individual Start Address Register
+ __IO uint32_t SFF_sa;
+
+ ///Offset: 0x00000008 - Standard Frame Group Start Address Register
+ __IO uint32_t SFF_GRP_sa;
+
+ ///Offset: 0x0000000C - Extended Frame Start Address Register
+ __IO uint32_t EFF_sa;
+
+ ///Offset: 0x00000010 - Extended Frame Group Start Address Register
+ __IO uint32_t EFF_GRP_sa;
+
+ ///Offset: 0x00000014 - End of AF Tables register
+ __IO uint32_t ENDofTable;
+
+ ///Offset: 0x00000018 - LUT Error Address register
+ __I uint32_t LUTerrAd;
+
+ ///Offset: 0x0000001C - LUT Error Register
+ __I uint32_t LUTerr;
+
+ ///Offset: 0x00000020 - CAN Central Transmit Status Register
+ __IO uint32_t FCANIE;
+
+ ///Offset: 0x00000024 - FullCAN Interrupt and Capture registers 0
+ __IO uint32_t FCANIC0;
+
+ ///Offset: 0x00000028 - FullCAN Interrupt and Capture registers 1
+ __IO uint32_t FCANIC1;
+} LPC_CANAF_TypeDef;
+
+typedef struct /* Central Registers */
+{
+ __I uint32_t TxSR;
+ __I uint32_t RxSR;
+ __I uint32_t MSR;
+} LPC_CANCR_TypeDef;
+
+typedef struct /* Controller Registers */
+{
+ ///Offset: 0x00000000 - Controls the operating mode of the CAN Controller
+ __IO uint32_t MOD;
+
+ ///Offset: 0x00000004 - Command bits that affect the state
+ __O uint32_t CMR;
+
+ ///Offset: 0x00000008 - Global Controller Status and Error Counters
+ __IO uint32_t GSR;
+
+ ///Offset: 0x0000000C - Interrupt status, Arbitration Lost Capture, Error Code Capture
+ __I uint32_t ICR;
+
+ ///Offset: 0x00000010 - Interrupt Enable Register
+ __IO uint32_t IER;
+
+ ///Offset: 0x00000014 - Bus Timing Register
+ __IO uint32_t BTR;
+
+ ///Offset: 0x00000018 - Error Warning Limit
+ __IO uint32_t EWL;
+
+ ///Offset: 0x0000001C - Status Register
+ __I uint32_t SR;
+
+ ///Offset: 0x00000020 - Receive frame status
+ __IO uint32_t RFS;
+
+ ///Offset: 0x00000024 - Received Identifier
+ __IO uint32_t RID;
+
+ ///Offset: 0x00000028 - Received data bytes 1-4
+ __IO uint32_t RDA;
+
+ ///Offset: 0x0000002C - Received data bytes 5-8
+ __IO uint32_t RDB;
+
+ ///Offset: 0x00000030 - Transmit frame info (Tx Buffer 1)
+ __IO uint32_t TFI1;
+
+ ///Offset: 0x00000034 - Transmit Identifier (Tx Buffer 1)
+ __IO uint32_t TID1;
+
+ ///Offset: 0x00000038 - Transmit data bytes 1-4 (Tx Buffer 1)
+ __IO uint32_t TDA1;
+
+ ///Offset: 0x0000003C - Transmit data bytes 5-8 (Tx Buffer 1)
+ __IO uint32_t TDB1;
+
+ ///Offset: 0x00000040 - Transmit frame info (Tx Buffer 2)
+ __IO uint32_t TFI2;
+
+ ///Offset: 0x00000044 - Transmit Identifier (Tx Buffer 2)
+ __IO uint32_t TID2;
+
+ ///Offset: 0x00000048 - Transmit data bytes 1-4 (Tx Buffer 2)
+ __IO uint32_t TDA2;
+
+ ///Offset: 0x0000004C - Transmit data bytes 5-8 (Tx Buffer 2)
+ __IO uint32_t TDB2;
+
+ ///Offset: 0x00000050 - Transmit frame info (Tx Buffer 3)
+ __IO uint32_t TFI3;
+
+ ///Offset: 0x00000054 - Transmit Identifier (Tx Buffer 3)
+ __IO uint32_t TID3;
+
+ ///Offset: 0x00000058 - Transmit data bytes 1-4 (Tx Buffer 3)
+ __IO uint32_t TDA3;
+
+ ///Offset: 0x0000005C - Transmit data bytes 5-8 (Tx Buffer 3)
+ __IO uint32_t TDB3;
+} LPC_CAN_TypeDef;
+
+/*------------- Digital-to-Analog Converter (DAC) ----------------------------*/
+typedef struct
+{
+ __IO uint32_t CR;
+ __IO uint32_t CTRL;
+ __IO uint32_t CNTVAL;
+} LPC_DAC_TypeDef;
+
+
+/*------------- Inter IC Sound (I2S) -----------------------------------------*/
+typedef struct
+{
+ __IO uint32_t DAO;
+ __IO uint32_t DAI;
+ __O uint32_t TXFIFO;
+ __I uint32_t RXFIFO;
+ __I uint32_t STATE;
+ __IO uint32_t DMA1;
+ __IO uint32_t DMA2;
+ __IO uint32_t IRQ;
+ __IO uint32_t TXRATE;
+ __IO uint32_t RXRATE;
+ __IO uint32_t TXBITRATE;
+ __IO uint32_t RXBITRATE;
+ __IO uint32_t TXMODE;
+ __IO uint32_t RXMODE;
+} LPC_I2S_TypeDef;
+
+
+
+
+
+
+/*------------- Motor Control Pulse-Width Modulation (MCPWM) -----------------*/
+typedef struct
+{
+ __I uint32_t CON;
+ __O uint32_t CON_SET;
+ __O uint32_t CON_CLR;
+ __I uint32_t CAPCON;
+ __O uint32_t CAPCON_SET;
+ __O uint32_t CAPCON_CLR;
+ __IO uint32_t TC0;
+ __IO uint32_t TC1;
+ __IO uint32_t TC2;
+ __IO uint32_t LIM0;
+ __IO uint32_t LIM1;
+ __IO uint32_t LIM2;
+ __IO uint32_t MAT0;
+ __IO uint32_t MAT1;
+ __IO uint32_t MAT2;
+ __IO uint32_t DT;
+ __IO uint32_t CP;
+ __IO uint32_t CAP0;
+ __IO uint32_t CAP1;
+ __IO uint32_t CAP2;
+ __I uint32_t INTEN;
+ __O uint32_t INTEN_SET;
+ __O uint32_t INTEN_CLR;
+ __I uint32_t CNTCON;
+ __O uint32_t CNTCON_SET;
+ __O uint32_t CNTCON_CLR;
+ __I uint32_t INTF;
+ __O uint32_t INTF_SET;
+ __O uint32_t INTF_CLR;
+ __O uint32_t CAP_CLR;
+} LPC_MCPWM_TypeDef;
+
+/*------------- Quadrature Encoder Interface (QEI) ---------------------------*/
+typedef struct
+{
+ __O uint32_t CON;
+ __I uint32_t STAT;
+ __IO uint32_t CONF;
+ __I uint32_t POS;
+ __IO uint32_t MAXPOS;
+ __IO uint32_t CMPOS0;
+ __IO uint32_t CMPOS1;
+ __IO uint32_t CMPOS2;
+ __I uint32_t INXCNT;
+ __IO uint32_t INXCMP0;
+ __IO uint32_t LOAD;
+ __I uint32_t TIME;
+ __I uint32_t VEL;
+ __I uint32_t CAP;
+ __IO uint32_t VELCOMP;
+ __IO uint32_t FILTERPHA;
+ __IO uint32_t FILTERPHB;
+ __IO uint32_t FILTERINX;
+ __IO uint32_t WINDOW;
+ __IO uint32_t INXCMP1;
+ __IO uint32_t INXCMP2;
+ uint32_t RESERVED0[993];
+ __O uint32_t IEC;
+ __O uint32_t IES;
+ __I uint32_t INTSTAT;
+ __I uint32_t IE;
+ __O uint32_t CLR;
+ __O uint32_t SET;
+} LPC_QEI_TypeDef;
+
+/*------------- SD/MMC card Interface (MCI)-----------------------------------*/
+typedef struct
+{
+ __IO uint32_t POWER;
+ __IO uint32_t CLOCK;
+ __IO uint32_t ARGUMENT;
+ __IO uint32_t COMMAND;
+ __I uint32_t RESP_CMD;
+ __I uint32_t RESP0;
+ __I uint32_t RESP1;
+ __I uint32_t RESP2;
+ __I uint32_t RESP3;
+ __IO uint32_t DATATMR;
+ __IO uint32_t DATALEN;
+ __IO uint32_t DATACTRL;
+ __I uint32_t DATACNT;
+ __I uint32_t STATUS;
+ __O uint32_t CLEAR;
+ __IO uint32_t MASK0;
+ uint32_t RESERVED0[2];
+ __I uint32_t FIFOCNT;
+ uint32_t RESERVED1[13];
+ __IO uint32_t FIFO[16];
+} LPC_MCI_TypeDef;
+
+
+
+
+
+
+
+
+
+
+/*------------- EEPROM Controller (EEPROM) -----------------------------------*/
+typedef struct
+{
+ __IO uint32_t CMD; /* 0x0080 */
+ __IO uint32_t ADDR;
+ __IO uint32_t WDATA;
+ __IO uint32_t RDATA;
+ __IO uint32_t WSTATE; /* 0x0090 */
+ __IO uint32_t CLKDIV;
+ __IO uint32_t PWRDWN; /* 0x0098 */
+ uint32_t RESERVED0[975];
+ __IO uint32_t INT_CLR_ENABLE; /* 0x0FD8 */
+ __IO uint32_t INT_SET_ENABLE;
+ __IO uint32_t INT_STATUS; /* 0x0FE0 */
+ __IO uint32_t INT_ENABLE;
+ __IO uint32_t INT_CLR_STATUS;
+ __IO uint32_t INT_SET_STATUS;
+} LPC_EEPROM_TypeDef;
+
+
+/*------------- COMPARATOR ----------------------------------------------------*/
+
+typedef struct { /*!< (@ 0x40020000) COMPARATOR Structure */
+ __IO uint32_t CTRL; /*!< (@ 0x40020000) Comparator block control register */
+ __IO uint32_t CTRL0; /*!< (@ 0x40020004) Comparator 0 control register */
+ __IO uint32_t CTRL1; /*!< (@ 0x40020008) Comparator 1 control register */
+} LPC_COMPARATOR_Type;
+
+
+#if defined ( __CC_ARM )
+#pragma no_anon_unions
+#endif
+
+/******************************************************************************/
+/* Peripheral memory map */
+/******************************************************************************/
+/* Base addresses */
+#define LPC_FLASH_BASE (0x00000000UL)
+#define LPC_RAM_BASE (0x10000000UL)
+#define LPC_PERI_RAM_BASE (0x20000000UL)
+#define LPC_APB0_BASE (0x40000000UL)
+#define LPC_APB1_BASE (0x40080000UL)
+#define LPC_AHBRAM1_BASE (0x20004000UL)
+#define LPC_AHB_BASE (0x20080000UL)
+#define LPC_CM3_BASE (0xE0000000UL)
+
+/* APB0 peripherals */
+#define LPC_WDT_BASE (LPC_APB0_BASE + 0x00000)
+#define LPC_TIM0_BASE (LPC_APB0_BASE + 0x04000)
+#define LPC_TIM1_BASE (LPC_APB0_BASE + 0x08000)
+#define LPC_UART0_BASE (LPC_APB0_BASE + 0x0C000)
+#define LPC_UART1_BASE (LPC_APB0_BASE + 0x10000)
+#define LPC_PWM0_BASE (LPC_APB0_BASE + 0x14000)
+#define LPC_PWM1_BASE (LPC_APB0_BASE + 0x18000)
+#define LPC_I2C0_BASE (LPC_APB0_BASE + 0x1C000)
+#define LPC_COMPARATOR_BASE (LPC_APB0_BASE + 0x20000)
+#define LPC_RTC_BASE (LPC_APB0_BASE + 0x24000)
+#define LPC_GPIOINT_BASE (LPC_APB0_BASE + 0x28080)
+#define LPC_IOCON_BASE (LPC_APB0_BASE + 0x2C000)
+#define LPC_SSP1_BASE (LPC_APB0_BASE + 0x30000)
+#define LPC_ADC_BASE (LPC_APB0_BASE + 0x34000)
+#define LPC_CANAF_RAM_BASE (LPC_APB0_BASE + 0x38000)
+#define LPC_CANAF_BASE (LPC_APB0_BASE + 0x3C000)
+#define LPC_CANCR_BASE (LPC_APB0_BASE + 0x40000)
+#define LPC_CAN1_BASE (LPC_APB0_BASE + 0x44000)
+#define LPC_CAN2_BASE (LPC_APB0_BASE + 0x48000)
+#define LPC_I2C1_BASE (LPC_APB0_BASE + 0x5C000)
+
+/* APB1 peripherals */
+#define LPC_SSP0_BASE (LPC_APB1_BASE + 0x08000)
+#define LPC_DAC_BASE (LPC_APB1_BASE + 0x0C000)
+#define LPC_TIM2_BASE (LPC_APB1_BASE + 0x10000)
+#define LPC_TIM3_BASE (LPC_APB1_BASE + 0x14000)
+#define LPC_UART2_BASE (LPC_APB1_BASE + 0x18000)
+#define LPC_UART3_BASE (LPC_APB1_BASE + 0x1C000)
+#define LPC_I2C2_BASE (LPC_APB1_BASE + 0x20000)
+#define LPC_UART4_BASE (LPC_APB1_BASE + 0x24000)
+#define LPC_I2S_BASE (LPC_APB1_BASE + 0x28000)
+#define LPC_SSP2_BASE (LPC_APB1_BASE + 0x2C000)
+#define LPC_MCPWM_BASE (LPC_APB1_BASE + 0x38000)
+#define LPC_QEI_BASE (LPC_APB1_BASE + 0x3C000)
+#define LPC_MCI_BASE (LPC_APB1_BASE + 0x40000)
+#define LPC_SC_BASE (LPC_APB1_BASE + 0x7C000)
+
+/* AHB peripherals */
+#define LPC_GPDMA_BASE (LPC_AHB_BASE + 0x00000)
+#define LPC_GPDMACH0_BASE (LPC_AHB_BASE + 0x00100)
+#define LPC_GPDMACH1_BASE (LPC_AHB_BASE + 0x00120)
+#define LPC_GPDMACH2_BASE (LPC_AHB_BASE + 0x00140)
+#define LPC_GPDMACH3_BASE (LPC_AHB_BASE + 0x00160)
+#define LPC_GPDMACH4_BASE (LPC_AHB_BASE + 0x00180)
+#define LPC_GPDMACH5_BASE (LPC_AHB_BASE + 0x001A0)
+#define LPC_GPDMACH6_BASE (LPC_AHB_BASE + 0x001C0)
+#define LPC_GPDMACH7_BASE (LPC_AHB_BASE + 0x001E0)
+#define LPC_EMAC_BASE (LPC_AHB_BASE + 0x04000)
+#define LPC_LCD_BASE (LPC_AHB_BASE + 0x08000)
+#define LPC_USB_BASE (LPC_AHB_BASE + 0x0C000)
+#define LPC_CRC_BASE (LPC_AHB_BASE + 0x10000)
+#define LPC_GPIO0_BASE (LPC_AHB_BASE + 0x18000)
+#define LPC_GPIO1_BASE (LPC_AHB_BASE + 0x18020)
+#define LPC_GPIO2_BASE (LPC_AHB_BASE + 0x18040)
+#define LPC_GPIO3_BASE (LPC_AHB_BASE + 0x18060)
+#define LPC_GPIO4_BASE (LPC_AHB_BASE + 0x18080)
+#define LPC_GPIO5_BASE (LPC_AHB_BASE + 0x180A0)
+#define LPC_EMC_BASE (LPC_AHB_BASE + 0x1C000)
+
+#define LPC_EEPROM_BASE (LPC_FLASH_BASE+ 0x200080)
+
+
+/******************************************************************************/
+/* Peripheral declaration */
+/******************************************************************************/
+#define LPC_SC ((LPC_SC_TypeDef *) LPC_SC_BASE )
+#define LPC_WDT ((LPC_WDT_TypeDef *) LPC_WDT_BASE )
+#define LPC_TIM0 ((LPC_TIM_TypeDef *) LPC_TIM0_BASE )
+#define LPC_TIM1 ((LPC_TIM_TypeDef *) LPC_TIM1_BASE )
+#define LPC_TIM2 ((LPC_TIM_TypeDef *) LPC_TIM2_BASE )
+#define LPC_TIM3 ((LPC_TIM_TypeDef *) LPC_TIM3_BASE )
+#define LPC_UART0 ((LPC_UART_TypeDef *) LPC_UART0_BASE )
+#define LPC_UART1 ((LPC_UART1_TypeDef *) LPC_UART1_BASE )
+#define LPC_UART2 ((LPC_UART_TypeDef *) LPC_UART2_BASE )
+#define LPC_UART3 ((LPC_UART_TypeDef *) LPC_UART3_BASE )
+#define LPC_UART4 ((LPC_UART4_TypeDef *) LPC_UART4_BASE )
+#define LPC_PWM0 ((LPC_PWM_TypeDef *) LPC_PWM0_BASE )
+#define LPC_PWM1 ((LPC_PWM_TypeDef *) LPC_PWM1_BASE )
+#define LPC_I2C0 ((LPC_I2C_TypeDef *) LPC_I2C0_BASE )
+#define LPC_I2C1 ((LPC_I2C_TypeDef *) LPC_I2C1_BASE )
+#define LPC_I2C2 ((LPC_I2C_TypeDef *) LPC_I2C2_BASE )
+#define LPC_I2S ((LPC_I2S_TypeDef *) LPC_I2S_BASE )
+#define LPC_COMPARATOR ((LPC_COMPARATOR_Type *) LPC_COMPARATOR_BASE)
+#define LPC_RTC ((LPC_RTC_TypeDef *) LPC_RTC_BASE )
+#define LPC_GPIOINT ((LPC_GPIOINT_TypeDef *) LPC_GPIOINT_BASE )
+#define LPC_IOCON ((LPC_IOCON_TypeDef *) LPC_IOCON_BASE )
+#define LPC_SSP0 ((LPC_SSP_TypeDef *) LPC_SSP0_BASE )
+#define LPC_SSP1 ((LPC_SSP_TypeDef *) LPC_SSP1_BASE )
+#define LPC_SSP2 ((LPC_SSP_TypeDef *) LPC_SSP2_BASE )
+#define LPC_ADC ((LPC_ADC_TypeDef *) LPC_ADC_BASE )
+#define LPC_DAC ((LPC_DAC_TypeDef *) LPC_DAC_BASE )
+#define LPC_CANAF_RAM ((LPC_CANAF_RAM_TypeDef *) LPC_CANAF_RAM_BASE)
+#define LPC_CANAF ((LPC_CANAF_TypeDef *) LPC_CANAF_BASE )
+#define LPC_CANCR ((LPC_CANCR_TypeDef *) LPC_CANCR_BASE )
+#define LPC_CAN1 ((LPC_CAN_TypeDef *) LPC_CAN1_BASE )
+#define LPC_CAN2 ((LPC_CAN_TypeDef *) LPC_CAN2_BASE )
+#define LPC_MCPWM ((LPC_MCPWM_TypeDef *) LPC_MCPWM_BASE )
+#define LPC_QEI ((LPC_QEI_TypeDef *) LPC_QEI_BASE )
+#define LPC_MCI ((LPC_MCI_TypeDef *) LPC_MCI_BASE )
+#define LPC_GPDMA ((LPC_GPDMA_TypeDef *) LPC_GPDMA_BASE )
+#define LPC_GPDMACH0 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH0_BASE )
+#define LPC_GPDMACH1 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH1_BASE )
+#define LPC_GPDMACH2 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH2_BASE )
+#define LPC_GPDMACH3 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH3_BASE )
+#define LPC_GPDMACH4 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH4_BASE )
+#define LPC_GPDMACH5 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH5_BASE )
+#define LPC_GPDMACH6 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH6_BASE )
+#define LPC_GPDMACH7 ((LPC_GPDMACH_TypeDef *) LPC_GPDMACH7_BASE )
+#define LPC_EMAC ((LPC_EMAC_TypeDef *) LPC_EMAC_BASE )
+#define LPC_LCD ((LPC_LCD_TypeDef *) LPC_LCD_BASE )
+#define LPC_USB ((LPC_USB_TypeDef *) LPC_USB_BASE )
+#define LPC_GPIO0 ((LPC_GPIO_TypeDef *) LPC_GPIO0_BASE )
+#define LPC_GPIO1 ((LPC_GPIO_TypeDef *) LPC_GPIO1_BASE )
+#define LPC_GPIO2 ((LPC_GPIO_TypeDef *) LPC_GPIO2_BASE )
+#define LPC_GPIO3 ((LPC_GPIO_TypeDef *) LPC_GPIO3_BASE )
+#define LPC_GPIO4 ((LPC_GPIO_TypeDef *) LPC_GPIO4_BASE )
+#define LPC_GPIO5 ((LPC_GPIO_TypeDef *) LPC_GPIO5_BASE )
+#define LPC_EMC ((LPC_EMC_TypeDef *) LPC_EMC_BASE )
+#define LPC_CRC ((LPC_CRC_TypeDef *) LPC_CRC_BASE )
+#define LPC_EEPROM ((LPC_EEPROM_TypeDef *) LPC_EEPROM_BASE )
+
+
+
+#endif // __LPC407x_8x_177x_8x_H__
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC4088_DM/TARGET_NXP/TARGET_LPC408X/PortNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,35 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ Port0 = 0,
+ Port1 = 1,
+ Port2 = 2,
+ Port3 = 3,
+ Port4 = 4,
+ Port5 = 5
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC4088_DM/TARGET_NXP/TARGET_LPC408X/TARGET_LPC4088_DM/PeripheralNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,111 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ UART_0 = (int)LPC_UART0_BASE,
+ UART_1 = (int)LPC_UART1_BASE,
+ UART_2 = (int)LPC_UART2_BASE,
+ UART_3 = (int)LPC_UART3_BASE,
+ UART_4 = (int)LPC_UART4_BASE
+} UARTName;
+
+typedef enum {
+ ADC0_0 = 0,
+ ADC0_1,
+ ADC0_2,
+ ADC0_3,
+ ADC0_4,
+ ADC0_5,
+ ADC0_6,
+ ADC0_7
+} ADCName;
+
+typedef enum {
+ DAC_0 = 0
+} DACName;
+
+typedef enum {
+ SPI_0 = (int)LPC_SSP0_BASE,
+ SPI_1 = (int)LPC_SSP1_BASE,
+ SPI_2 = (int)LPC_SSP2_BASE
+} SPIName;
+
+typedef enum {
+ I2C_0 = (int)LPC_I2C0_BASE,
+ I2C_1 = (int)LPC_I2C1_BASE,
+ I2C_2 = (int)LPC_I2C2_BASE
+} I2CName;
+
+typedef enum {
+ PWM0_1 = 1,
+ PWM0_2,
+ PWM0_3,
+ PWM0_4,
+ PWM0_5,
+ PWM0_6,
+ PWM1_1,
+ PWM1_2,
+ PWM1_3,
+ PWM1_4,
+ PWM1_5,
+ PWM1_6
+} PWMName;
+
+typedef enum {
+ CAN_1 = (int)LPC_CAN1_BASE,
+ CAN_2 = (int)LPC_CAN2_BASE
+} CANName;
+
+#define STDIO_UART_TX USBTX
+#define STDIO_UART_RX USBRX
+#define STDIO_UART UART_0
+
+// Default peripherals
+#define MBED_SPI0 p7, p8, p9
+#define MBED_SPI1 p46, p44, p42, p45
+#define MBED_SPI2 p15, p16, p17, p18
+
+#define MBED_UART3 p29, p30
+#define MBED_UART4 p19, p18
+#define MBED_UARTUSB USBTX, USBRX
+
+#define MBED_I2C1 p12, p13
+
+#define MBED_CAN1 p12, p13
+#define MBED_CAN2 p41, p43
+
+#define MBED_ANALOGOUT0 p30
+
+#define MBED_ANALOGIN2 p29
+#define MBED_ANALOGIN3 p30
+
+#define MBED_PWMOUT0 p9
+#define MBED_PWMOUT1 p8
+#define MBED_PWMOUT2 p7
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC4088_DM/TARGET_NXP/TARGET_LPC408X/TARGET_LPC4088_DM/PinNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,106 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT 5
+
+typedef enum {
+ // LPC Pin Names
+ P0_0 = /*LPC_GPIO0_BASE*/0,
+ P0_1, P0_2, P0_3, P0_4, P0_5, P0_6, P0_7, P0_8, P0_9, P0_10, P0_11, P0_12, P0_13, P0_14, P0_15, P0_16, P0_17, P0_18, P0_19, P0_20, P0_21, P0_22, P0_23, P0_24, P0_25, P0_26, P0_27, P0_28, P0_29, P0_30, P0_31,
+ P1_0, P1_1, P1_2, P1_3, P1_4, P1_5, P1_6, P1_7, P1_8, P1_9, P1_10, P1_11, P1_12, P1_13, P1_14, P1_15, P1_16, P1_17, P1_18, P1_19, P1_20, P1_21, P1_22, P1_23, P1_24, P1_25, P1_26, P1_27, P1_28, P1_29, P1_30, P1_31,
+ P2_0, P2_1, P2_2, P2_3, P2_4, P2_5, P2_6, P2_7, P2_8, P2_9, P2_10, P2_11, P2_12, P2_13, P2_14, P2_15, P2_16, P2_17, P2_18, P2_19, P2_20, P2_21, P2_22, P2_23, P2_24, P2_25, P2_26, P2_27, P2_28, P2_29, P2_30, P2_31,
+ P3_0, P3_1, P3_2, P3_3, P3_4, P3_5, P3_6, P3_7, P3_8, P3_9, P3_10, P3_11, P3_12, P3_13, P3_14, P3_15, P3_16, P3_17, P3_18, P3_19, P3_20, P3_21, P3_22, P3_23, P3_24, P3_25, P3_26, P3_27, P3_28, P3_29, P3_30, P3_31,
+ P4_0, P4_1, P4_2, P4_3, P4_4, P4_5, P4_6, P4_7, P4_8, P4_9, P4_10, P4_11, P4_12, P4_13, P4_14, P4_15, P4_16, P4_17, P4_18, P4_19, P4_20, P4_21, P4_22, P4_23, P4_24, P4_25, P4_26, P4_27, P4_28, P4_29, P4_30, P4_31,
+ P5_0, P5_1, P5_2, P5_3, P5_4,
+
+ // mbed DIP Pin Names
+ p1 = P0_30,
+ p2 = P2_14,
+ p3 = P0_29,
+ p4 = P2_15,
+
+ p7 = P1_24,
+ p8 = P1_23,
+ p9 = P1_20,
+ p10 = P1_19,
+ p11 = P0_21,
+ p12 = P0_0,
+ p13 = P0_1,
+ p14 = P2_10,
+ p15 = P5_0,
+ p16 = P5_1,
+ p17 = P5_2,
+ p18 = P5_3,
+ p19 = P5_4,
+ p20 = P2_22,
+ p21 = P2_23,
+ p22 = P2_25,
+ p23 = P2_26,
+ p24 = P2_27,
+ p25 = P0_2,
+ p26 = P0_3,
+
+ p29 = P0_25,
+ p30 = P0_26,
+
+ p41 = P0_4,
+ p42 = P0_7,
+ p43 = P0_5,
+ p44 = P0_8,
+ p45 = P0_6,
+ p46 = P0_9,
+
+ // Other mbed Pin Names
+ LED1 = P1_18,
+ LED2 = P0_13,
+ LED3 = P1_13,
+ LED4 = P2_19,
+
+ USBTX = P0_2,
+ USBRX = P0_3,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullUp = 2,
+ PullDown = 1,
+ PullNone = 0,
+ OpenDrain = 4,
+ PullDefault = PullDown
+} PinMode;
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_LPC4088_DM/TARGET_NXP/TARGET_LPC408X/device.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,59 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 1 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_CAN 1 + +#define DEVICE_RTC 1 + +#define DEVICE_ETHERNET 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 32 +#define DEVICE_MAC_OFFSET 20 + +#define DEVICE_SLEEP 1 + +#define DEVICE_DEBUG_AWARENESS 1 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_PATTERN 1 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC4088_DM/TARGET_NXP/TARGET_LPC408X/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_GPIO_OBJECT_H
+#define MBED_GPIO_OBJECT_H
+
+#include "mbed_assert.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ uint32_t mask;
+
+ __IO uint32_t *reg_dir;
+ __IO uint32_t *reg_set;
+ __IO uint32_t *reg_clr;
+ __I uint32_t *reg_in;
+} gpio_t;
+
+static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ if (value)
+ *obj->reg_set = obj->mask;
+ else
+ *obj->reg_clr = obj->mask;
+}
+
+static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ return ((*obj->reg_in & obj->mask) ? 1 : 0);
+}
+
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC4088_DM/TARGET_NXP/TARGET_LPC408X/objects.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,80 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ uint32_t port;
+ uint32_t pin;
+ uint32_t ch;
+};
+
+struct port_s {
+ __IO uint32_t *reg_dir;
+ __IO uint32_t *reg_out;
+ __I uint32_t *reg_in;
+ PortName port;
+ uint32_t mask;
+};
+
+struct pwmout_s {
+ __IO uint32_t *MR;
+ LPC_PWM_TypeDef *pwm;
+ uint32_t channel;
+};
+
+struct serial_s {
+ LPC_UART_TypeDef *uart;
+ int index;
+};
+
+struct analogin_s {
+ ADCName adc;
+};
+
+struct dac_s {
+ DACName dac;
+};
+
+struct can_s {
+ LPC_CAN_TypeDef *dev;
+ int index;
+};
+
+struct i2c_s {
+ LPC_I2C_TypeDef *i2c;
+};
+
+struct spi_s {
+ LPC_SSP_TypeDef *spi;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC4088_DM/TOOLCHAIN_ARM_STD/LPC407X_8X.sct Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,31 @@
+; *************************************************************
+; *** Scatter-Loading Description File generated by uVision ***
+; *************************************************************
+
+LR_IROM1 0x00000000 0x00080000 { ; load region size_region
+ ER_IROM1 0x00000000 0x00080000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ *.o (+RO-CODE) ; prioritizes CODE in IFLASH before SPIFI
+ .ANY2 (+RO-DATA) ; prioritizes DATA in IFLASH before SPIFI
+ .ANY (+RO) ; remaining RO
+ }
+ RW_IRAM1 0x100000E8 0x0000FF18 { ; RW data
+ .ANY (+RW +ZI)
+ }
+ RW_IRAM2 0x20000000 0x00004000 {
+ .ANY (AHBSRAM0)
+ }
+ RW_IRAM3 0x20004000 0x00004000 {
+ .ANY (AHBSRAM1)
+ }
+}
+
+LR_IROM2 0x28000000 0x01000000 {
+ ER_IROM2 0x28000000 0x01000000 { ; load address = execution address
+ .ANY1 (+RO-DATA) ; all DATA not fitting in IFLASH
+ .ANY (SPIFI_MEM) ; DATA tagged as SPIFI_MEM
+ *.o (SPIFI_MEM) ; CODE tagged as SPIFI_MEM
+ }
+}
+
Binary file TARGET_LPC4088_DM/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_ARM_STD/startup_LPC407x_8x_177x_8x.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_ARM_STD/sys_helper.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_ARM_STD/system_LPC407x_8x_177x_8x.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC4088_DM/TOOLCHAIN_GCC_ARM/LPC4088.ld Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,172 @@
+/* Linker script for mbed LPC1768 */
+
+/* Linker script to configure memory regions. */
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 512K
+ RAM (rwx) : ORIGIN = 0x100000E8, LENGTH = (64K - 0xE8)
+
+ USB_RAM(rwx) : ORIGIN = 0x20000000, LENGTH = 16K
+ ETH_RAM(rwx) : ORIGIN = 0x20004000, LENGTH = 16K
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.isr_vector))
+ *(.text*)
+
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ Image$$RW_IRAM1$$Base = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE (__fini_array_end = .);
+
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+
+ } > RAM
+
+
+ .bss :
+ {
+ __bss_start__ = .;
+ *(.bss*)
+ *(COMMON)
+ __bss_end__ = .;
+ Image$$RW_IRAM1$$ZI$$Limit = . ;
+ } > RAM
+
+
+ .heap :
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy :
+ {
+ *(.stack)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+
+
+ /* Code can explicitly ask for data to be
+ placed in these higher RAM banks where
+ they will be left uninitialized.
+ */
+ .AHBSRAM0 (NOLOAD):
+ {
+ Image$$RW_IRAM2$$Base = . ;
+ *(AHBSRAM0)
+ Image$$RW_IRAM2$$ZI$$Limit = .;
+ } > USB_RAM
+
+ .AHBSRAM1 (NOLOAD):
+ {
+ Image$$RW_IRAM3$$Base = . ;
+ *(AHBSRAM1)
+ Image$$RW_IRAM3$$ZI$$Limit = .;
+ } > ETH_RAM
+}
Binary file TARGET_LPC4088_DM/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_GCC_ARM/startup_LPC408x.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_GCC_ARM/system_LPC407x_8x_177x_8x.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC4088_DM/TOOLCHAIN_GCC_CR/LPC407x_8x.ld Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,181 @@
+/*
+ * GENERATED FILE - DO NOT EDIT
+ * (C) Code Red Technologies Ltd, 2008-2013
+ * Generated linker script file for LPC4088
+ * Created from generic_c.ld (vLPCXpresso v5.1 (2 [Build 2065] [2013-02-20] ))
+ * By LPCXpresso v5.1.2 [Build 2065] [2013-02-20] on Wed Apr 17 14:50:07 CEST 2013
+ */
+
+
+GROUP(libgcc.a libc.a libstdc++.a libm.a libcr_newlib_nohost.a crti.o crtn.o crtbegin.o crtend.o)
+
+MEMORY
+{
+ /* Define each memory region */
+ MFlash512 (rx) : ORIGIN = 0x0, LENGTH = 0x80000 /* 512k */
+ RamLoc64 (rwx) : ORIGIN = 0x100000E8, LENGTH = 0xFF18 /* 64k */
+ RamPeriph32 (rwx) : ORIGIN = 0x20000000, LENGTH = 0x8000 /* 32k */
+
+}
+ /* Define a symbol for the top of each memory region */
+ __top_MFlash512 = 0x0 + 0x80000;
+ __top_RamLoc64 = 0x10000000 + 0x10000;
+ __top_RamPeriph32 = 0x20000000 + 0x8000;
+
+ENTRY(ResetISR)
+
+SECTIONS
+{
+
+ /* MAIN TEXT SECTION */
+ .text : ALIGN(4)
+ {
+ FILL(0xff)
+ KEEP(*(.isr_vector))
+
+ /* Global Section Table */
+ . = ALIGN(4) ;
+ __section_table_start = .;
+ __data_section_table = .;
+ LONG(LOADADDR(.data));
+ LONG( ADDR(.data)) ;
+ LONG( SIZEOF(.data));
+ LONG(LOADADDR(.data_RAM2));
+ LONG( ADDR(.data_RAM2)) ;
+ LONG( SIZEOF(.data_RAM2));
+ __data_section_table_end = .;
+ __bss_section_table = .;
+ LONG( ADDR(.bss));
+ LONG( SIZEOF(.bss));
+ LONG( ADDR(.bss_RAM2));
+ LONG( SIZEOF(.bss_RAM2));
+ __bss_section_table_end = .;
+ __section_table_end = . ;
+ /* End of Global Section Table */
+
+
+ *(.after_vectors*)
+
+ *(.text*)
+ *(.rodata .rodata.*)
+ . = ALIGN(4);
+
+ /* C++ constructors etc */
+ . = ALIGN(4);
+ KEEP(*(.init))
+
+ . = ALIGN(4);
+ __preinit_array_start = .;
+ KEEP (*(.preinit_array))
+ __preinit_array_end = .;
+
+ . = ALIGN(4);
+ __init_array_start = .;
+ KEEP (*(SORT(.init_array.*)))
+ KEEP (*(.init_array))
+ __init_array_end = .;
+
+ KEEP(*(.fini));
+
+ . = ALIGN(4);
+ KEEP (*crtbegin.o(.ctors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors))
+ KEEP (*(SORT(.ctors.*)))
+ KEEP (*crtend.o(.ctors))
+
+ . = ALIGN(4);
+ KEEP (*crtbegin.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors))
+ KEEP (*(SORT(.dtors.*)))
+ KEEP (*crtend.o(.dtors))
+ /* End C++ */
+ } > MFlash512
+
+ /*
+ * for exception handling/unwind - some Newlib functions (in common
+ * with C++ and STDC++) use this.
+ */
+ .ARM.extab : ALIGN(4)
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > MFlash512
+ __exidx_start = .;
+
+ .ARM.exidx : ALIGN(4)
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > MFlash512
+ __exidx_end = .;
+
+ _etext = .;
+
+
+ /* DATA section for RamPeriph32 */
+ .data_RAM2 : ALIGN(4)
+ {
+ FILL(0xff)
+ *(.data.$RAM2*)
+ *(.data.$RamPeriph32*)
+ . = ALIGN(4) ;
+ } > RamPeriph32 AT>MFlash512
+
+ /* MAIN DATA SECTION */
+
+
+ .uninit_RESERVED : ALIGN(4)
+ {
+ KEEP(*(.bss.$RESERVED*))
+ . = ALIGN(4) ;
+ _end_uninit_RESERVED = .;
+ } > RamLoc64
+
+ .data : ALIGN(4)
+ {
+ FILL(0xff)
+ _data = .;
+ *(vtable)
+ *(.data*)
+ . = ALIGN(4) ;
+ _edata = .;
+ } > RamLoc64 AT>MFlash512
+
+ /* BSS section for RamPeriph32 */
+ .bss_RAM2 : ALIGN(4)
+ {
+ *(.bss.$RAM2*)
+ *(.bss.$RamPeriph32*)
+ . = ALIGN(4) ;
+ } > RamPeriph32
+
+ /* MAIN BSS SECTION */
+ .bss : ALIGN(4)
+ {
+ _bss = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4) ;
+ _ebss = .;
+ PROVIDE(end = .);
+ __end__ = .;
+ } > RamLoc64
+
+ /* NOINIT section for RamPeriph32 */
+ .noinit_RAM2 (NOLOAD) : ALIGN(4)
+ {
+ *(.noinit.$RAM2*)
+ *(.noinit.$RamPeriph32*)
+ . = ALIGN(4) ;
+ } > RamPeriph32
+
+ /* DEFAULT NOINIT SECTION */
+ .noinit (NOLOAD): ALIGN(4)
+ {
+ _noinit = .;
+ *(.noinit*)
+ . = ALIGN(4) ;
+ _end_noinit = .;
+ } > RamLoc64
+
+ PROVIDE(_pvHeapStart = .);
+ PROVIDE(_vStackTop = __top_RamLoc64 - 0);
+}
Binary file TARGET_LPC4088_DM/TOOLCHAIN_GCC_CR/board.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_GCC_CR/cmsis_nvic.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_GCC_CR/retarget.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_GCC_CR/startup_lpc407x_8x.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_GCC_CR/system_LPC407x_8x_177x_8x.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC4088_DM/TOOLCHAIN_IAR/LPC4088.icf Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,41 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x0007FFFF;
+define symbol __ICFEDIT_region_NVIC_start__ = 0x10000000;
+define symbol __ICFEDIT_region_NVIC_end__ = 0x100000E7;
+define symbol __ICFEDIT_region_RAM_start__ = 0x100000E8;
+define symbol __ICFEDIT_region_RAM_end__ = 0x1000FFDF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x800;
+define symbol __ICFEDIT_size_heap__ = 0x1000;
+/**** End of ICF editor section. ###ICF###*/
+
+define symbol __CRP_start__ = 0x000002FC;
+define symbol __CRP_end__ = 0x000002FF;
+
+define symbol __RAM1_start__ = 0x20000000;
+define symbol __RAM1_end__ = 0x20007FFF;
+
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__] - mem:[from __CRP_start__ to __CRP_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+define region CRP_region = mem:[from __CRP_start__ to __CRP_end__];
+define region RAM1_region = mem:[from __RAM1_start__ to __RAM1_end__];
+
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block HEAP, block CSTACK };
+place in CRP_region { section .crp };
+place in RAM1_region { section .sram };
Binary file TARGET_LPC4088_DM/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_IAR/startup_LPC408x.o has changed
Binary file TARGET_LPC4088_DM/TOOLCHAIN_IAR/system_LPC407x_8x_177x_8x.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_LPC4088_DM/cmsis.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,13 @@ +/* mbed Microcontroller Library - CMSIS + * Copyright (C) 2009-2011 ARM Limited. All rights reserved. + * + * A generic CMSIS include header, pulling in LPC407x_8x specifics + */ + +#ifndef MBED_CMSIS_H +#define MBED_CMSIS_H + +#include "LPC407x_8x_177x_8x.h" +#include "cmsis_nvic.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC4088_DM/cmsis_nvic.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,51 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2011 ARM Limited. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of ARM Limited nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+#define NVIC_NUM_VECTORS (16 + 41) // CORE + MCU Peripherals
+#define NVIC_USER_IRQ_OFFSET 16
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
+uint32_t NVIC_GetVector(IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC4088_DM/core_ca9.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,271 @@
+/**************************************************************************//**
+ * @file core_ca9.h
+ * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File
+ * @version
+ * @date 25 March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CA9_H_GENERIC
+#define __CORE_CA9_H_GENERIC
+
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_A9
+ @{
+ */
+
+/* CMSIS CA9 definitions */
+#define __CA9_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CA9_CMSIS_VERSION_SUB (0x10) /*!< [15:0] CMSIS HAL sub version */
+#define __CA9_CMSIS_VERSION ((__CA9_CMSIS_VERSION_MAIN << 16) | \
+ __CA9_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_A (0x09) /*!< Cortex-A Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /*!< standard types definitions */
+#include "core_caInstr.h" /*!< Core Instruction Access */
+#include "core_caFunc.h" /*!< Core Function Access */
+#include "core_cm4_simd.h" /*!< Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CA9_H_DEPENDANT
+#define __CORE_CA9_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CA9_REV
+ #define __CA9_REV 0x0000
+ #warning "__CA9_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 1
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 1
+ #endif
+
+ #if __Vendor_SysTickConfig == 0
+ #error "__Vendor_SysTickConfig set to 0, but vendor systick timer must be supplied for Cortex-A9"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_A9 */
+
+
+/*******************************************************************************
+ * Register Abstraction
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-A processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t reserved1:7; /*!< bit: 20..23 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/*@} end of group CMSIS_CORE */
+
+/*@} end of CMSIS_Core_FPUFunctions */
+
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC4088_DM/core_caFunc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,592 @@
+/**************************************************************************//**
+ * @file core_caFunc.h
+ * @brief CMSIS Cortex-A Core Function Access Header File
+ * @version V3.10
+ * @date 9 May 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CAFUNC_H__
+#define __CORE_CAFUNC_H__
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get CPSR Register
+
+ This function returns the content of the CPSR Register.
+
+ \return CPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_CPSR(void)
+{
+ register uint32_t __regCPSR __ASM("cpsr");
+ return(__regCPSR);
+}
+
+/** \brief Set Stack Pointer
+
+ This function assigns the given value to the current stack pointer.
+
+ \param [in] topOfStack Stack Pointer value to set
+ */
+register uint32_t __regSP __ASM("sp");
+__STATIC_INLINE void __set_SP(uint32_t topOfStack)
+{
+ __regSP = topOfStack;
+}
+
+
+/** \brief Get link register
+
+ This function returns the value of the link register
+
+ \return Value of link register
+ */
+register uint32_t __reglr __ASM("lr");
+__STATIC_INLINE uint32_t __get_LR(void)
+{
+ return(__reglr);
+}
+
+/** \brief Set link register
+
+ This function sets the value of the link register
+
+ \param [in] lr LR value to set
+ */
+__STATIC_INLINE void __set_LR(uint32_t lr)
+{
+ __reglr = lr;
+}
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_PSP(uint32_t topOfProcStack)
+{
+ ARM
+ PRESERVE8
+
+ BIC R0, R0, #7 ;ensure stack is 8-byte aligned
+ MRS R1, CPSR
+ CPS #MODE_SYS ;no effect in USR mode
+ MOV SP, R0
+ MSR CPSR_c, R1 ;no effect in USR mode
+ ISB
+ BX LR
+
+}
+
+/** \brief Set User Mode
+
+ This function changes the processor state to User Mode
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_CPS_USR(void)
+{
+ ARM
+
+ CPS #MODE_USR
+ BX LR
+}
+
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+/** \brief Get FPEXC
+
+ This function returns the current value of the Floating Point Exception Control register.
+
+ \return Floating Point Exception Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPEXC(void)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ return(__regfpexc);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPEXC
+
+ This function assigns the given value to the Floating Point Exception Control register.
+
+ \param [in] fpscr Floating Point Exception Control value to set
+ */
+__STATIC_INLINE void __set_FPEXC(uint32_t fpexc)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ __regfpexc = (fpexc);
+#endif
+}
+
+/** \brief Get CPACR
+
+ This function returns the current value of the Coprocessor Access Control register.
+
+ \return Coprocessor Access Control register value
+ */
+__STATIC_INLINE uint32_t __get_CPACR(void)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ return __regCPACR;
+}
+
+/** \brief Set CPACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] cpacr Coporcessor Acccess Control value to set
+ */
+__STATIC_INLINE void __set_CPACR(uint32_t cpacr)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ __regCPACR = cpacr;
+ __ISB();
+}
+
+/** \brief Get CBAR
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Configuration Base Address register value
+ */
+__STATIC_INLINE uint32_t __get_CBAR() {
+ register uint32_t __regCBAR __ASM("cp15:4:c15:c0:0");
+ return(__regCBAR);
+}
+
+/** \brief Get TTBR0
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Translation Table Base Register 0 value
+ */
+__STATIC_INLINE uint32_t __get_TTBR0() {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ return(__regTTBR0);
+}
+
+/** \brief Set TTBR0
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] ttbr0 Translation Table Base Register 0 value to set
+ */
+__STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ __regTTBR0 = ttbr0;
+ __ISB();
+}
+
+/** \brief Get DACR
+
+ This function returns the value of the Domain Access Control Register.
+
+ \return Domain Access Control Register value
+ */
+__STATIC_INLINE uint32_t __get_DACR() {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ return(__regDACR);
+}
+
+/** \brief Set DACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] dacr Domain Access Control Register value to set
+ */
+__STATIC_INLINE void __set_DACR(uint32_t dacr) {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ __regDACR = dacr;
+ __ISB();
+}
+
+/******************************** Cache and BTAC enable ****************************************************/
+
+/** \brief Set SCTLR
+
+ This function assigns the given value to the System Control Register.
+
+ \param [in] sctlr System Control Register, value to set
+ */
+__STATIC_INLINE void __set_SCTLR(uint32_t sctlr)
+{
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ __regSCTLR = sctlr;
+}
+
+/** \brief Get SCTLR
+
+ This function returns the value of the System Control Register.
+
+ \return System Control Register value
+ */
+__STATIC_INLINE uint32_t __get_SCTLR() {
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ return(__regSCTLR);
+}
+
+/** \brief Enable Caches
+
+ Enable Caches
+ */
+__STATIC_INLINE void __enable_caches(void) {
+ // Set I bit 12 to enable I Cache
+ // Set C bit 2 to enable D Cache
+ __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief Disable Caches
+
+ Disable Caches
+ */
+__STATIC_INLINE void __disable_caches(void) {
+ // Clear I bit 12 to disable I Cache
+ // Clear C bit 2 to disable D Cache
+ __set_SCTLR( __get_SCTLR() & ~(1 << 12) & ~(1 << 2));
+ __ISB();
+}
+
+/** \brief Enable BTAC
+
+ Enable BTAC
+ */
+__STATIC_INLINE void __enable_btac(void) {
+ // Set Z bit 11 to enable branch prediction
+ __set_SCTLR( __get_SCTLR() | (1 << 11));
+ __ISB();
+}
+
+/** \brief Disable BTAC
+
+ Disable BTAC
+ */
+__STATIC_INLINE void __disable_btac(void) {
+ // Clear Z bit 11 to disable branch prediction
+ __set_SCTLR( __get_SCTLR() & ~(1 << 11));
+}
+
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __enable_mmu(void) {
+ // Set M bit 0 to enable the MMU
+ // Set AFE bit to enable simplified access permissions model
+ // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+ __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+ __ISB();
+}
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __disable_mmu(void) {
+ // Clear M bit 0 to disable the MMU
+ __set_SCTLR( __get_SCTLR() & ~1);
+ __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief Invalidate the whole tlb
+
+ TLBIALL. Invalidate the whole tlb
+ */
+
+__STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+ register uint32_t __TLBIALL __ASM("cp15:0:c8:c7:0");
+ __TLBIALL = 0;
+ __DSB();
+ __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief Invalidate entire branch predictor array
+
+ BPIALL. Branch Predictor Invalidate All.
+ */
+
+__STATIC_INLINE void __v7_inv_btac(void) {
+ register uint32_t __BPIALL __ASM("cp15:0:c7:c5:6");
+ __BPIALL = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief Invalidate the whole I$
+
+ ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+__STATIC_INLINE void __v7_inv_icache_all(void) {
+ register uint32_t __ICIALLU __ASM("cp15:0:c7:c5:0");
+ __ICIALLU = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new I cache state
+}
+
+/** \brief Clean D$ by MVA
+
+ DCCMVAC. Data cache clean by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_dcache_mva(void *va) {
+ register uint32_t __DCCMVAC __ASM("cp15:0:c7:c10:1");
+ __DCCMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Invalidate D$ by MVA
+
+ DCIMVAC. Data cache invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_inv_dcache_mva(void *va) {
+ register uint32_t __DCIMVAC __ASM("cp15:0:c7:c6:1");
+ __DCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Clean and Invalidate D$ by MVA
+
+ DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+ register uint32_t __DCCIMVAC __ASM("cp15:0:c7:c14:1");
+ __DCCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief
+ * Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency.
+ */
+#pragma push
+#pragma arm
+__STATIC_ASM void __v7_all_cache(uint32_t op) {
+ ARM
+
+ PUSH {R4-R11}
+
+ MRC p15, 1, R6, c0, c0, 1 // Read CLIDR
+ ANDS R3, R6, #0x07000000 // Extract coherency level
+ MOV R3, R3, LSR #23 // Total cache levels << 1
+ BEQ Finished // If 0, no need to clean
+
+ MOV R10, #0 // R10 holds current cache level << 1
+Loop1 ADD R2, R10, R10, LSR #1 // R2 holds cache "Set" position
+ MOV R1, R6, LSR R2 // Bottom 3 bits are the Cache-type for this level
+ AND R1, R1, #7 // Isolate those lower 3 bits
+ CMP R1, #2
+ BLT Skip // No cache or only instruction cache at this level
+
+ MCR p15, 2, R10, c0, c0, 0 // Write the Cache Size selection register
+ ISB // ISB to sync the change to the CacheSizeID reg
+ MRC p15, 1, R1, c0, c0, 0 // Reads current Cache Size ID register
+ AND R2, R1, #7 // Extract the line length field
+ ADD R2, R2, #4 // Add 4 for the line length offset (log2 16 bytes)
+ LDR R4, =0x3FF
+ ANDS R4, R4, R1, LSR #3 // R4 is the max number on the way size (right aligned)
+ CLZ R5, R4 // R5 is the bit position of the way size increment
+ LDR R7, =0x7FFF
+ ANDS R7, R7, R1, LSR #13 // R7 is the max number of the index size (right aligned)
+
+Loop2 MOV R9, R4 // R9 working copy of the max way size (right aligned)
+
+Loop3 ORR R11, R10, R9, LSL R5 // Factor in the Way number and cache number into R11
+ ORR R11, R11, R7, LSL R2 // Factor in the Set number
+ CMP R0, #0
+ BNE Dccsw
+ MCR p15, 0, R11, c7, c6, 2 // DCISW. Invalidate by Set/Way
+ B cont
+Dccsw CMP R0, #1
+ BNE Dccisw
+ MCR p15, 0, R11, c7, c10, 2 // DCCSW. Clean by Set/Way
+ B cont
+Dccisw MCR p15, 0, R11, c7, c14, 2 // DCCISW, Clean and Invalidate by Set/Way
+cont SUBS R9, R9, #1 // Decrement the Way number
+ BGE Loop3
+ SUBS R7, R7, #1 // Decrement the Set number
+ BGE Loop2
+Skip ADD R10, R10, #2 // increment the cache number
+ CMP R3, R10
+ BGT Loop1
+
+Finished
+ DSB
+ POP {R4-R11}
+ BX lr
+
+}
+#pragma pop
+
+/** \brief __v7_all_cache - helper function
+
+ */
+
+/** \brief Invalidate the whole D$
+
+ DCISW. Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_inv_dcache_all(void) {
+ __v7_all_cache(0);
+}
+
+/** \brief Clean the whole D$
+
+ DCCSW. Clean by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_dcache_all(void) {
+ __v7_all_cache(1);
+}
+
+/** \brief Clean and invalidate the whole D$
+
+ DCCISW. Clean and Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_inv_dcache_all(void) {
+ __v7_all_cache(2);
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__ICCARM__)) /*---------------- ICC Compiler ---------------------*/
+
+#error IAR Compiler support not implemented for Cortex-A
+
+#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
+
+//#error GNU Compiler support not implemented for Cortex-A
+
+#elif (defined (__TASKING__)) /*--------------- TASKING Compiler -----------------*/
+
+#error TASKING Compiler support not implemented for Cortex-A
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CAFUNC_H__ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_LPC4088_DM/core_caInstr.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,45 @@ +/**************************************************************************//** + * @file core_caInstr.h + * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File + * @version + * @date 04. December 2012 + * + * @note + * + ******************************************************************************/ +/* Copyright (c) 2009 - 2012 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + +#ifndef __CORE_CAINSTR_H__ +#define __CORE_CAINSTR_H__ + +#define __CORTEX_M 0x3 +#include "core_cmInstr.h" +#undef __CORTEX_M + +#endif +
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC4088_DM/core_ca_mmu.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,848 @@
+;/**************************************************************************//**
+; * @file core_ca_mmu.h
+; * @brief MMU Startup File for
+; * VE_A9_MP Device Series
+; * @version V1.01
+; * @date 25 March 2013
+; *
+; * @note
+; *
+; ******************************************************************************/
+;/* Copyright (c) 2012 ARM LIMITED
+;
+; All rights reserved.
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+; - Redistributions of source code must retain the above copyright
+; notice, this list of conditions and the following disclaimer.
+; - Redistributions in binary form must reproduce the above copyright
+; notice, this list of conditions and the following disclaimer in the
+; documentation and/or other materials provided with the distribution.
+; - Neither the name of ARM nor the names of its contributors may be used
+; to endorse or promote products derived from this software without
+; specific prior written permission.
+; *
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+; ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+; LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+; CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+; SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+; INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+; CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+; ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+; POSSIBILITY OF SUCH DAMAGE.
+; ---------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef _MMU_FUNC_H
+#define _MMU_FUNC_H
+
+#define SECTION_DESCRIPTOR (0x2)
+#define SECTION_MASK (0xFFFFFFFC)
+
+#define SECTION_TEXCB_MASK (0xFFFF8FF3)
+#define SECTION_B_SHIFT (2)
+#define SECTION_C_SHIFT (3)
+#define SECTION_TEX0_SHIFT (12)
+#define SECTION_TEX1_SHIFT (13)
+#define SECTION_TEX2_SHIFT (14)
+
+#define SECTION_XN_MASK (0xFFFFFFEF)
+#define SECTION_XN_SHIFT (4)
+
+#define SECTION_DOMAIN_MASK (0xFFFFFE1F)
+#define SECTION_DOMAIN_SHIFT (5)
+
+#define SECTION_P_MASK (0xFFFFFDFF)
+#define SECTION_P_SHIFT (9)
+
+#define SECTION_AP_MASK (0xFFFF73FF)
+#define SECTION_AP_SHIFT (10)
+#define SECTION_AP2_SHIFT (15)
+
+#define SECTION_S_MASK (0xFFFEFFFF)
+#define SECTION_S_SHIFT (16)
+
+#define SECTION_NG_MASK (0xFFFDFFFF)
+#define SECTION_NG_SHIFT (17)
+
+#define SECTION_NS_MASK (0xFFF7FFFF)
+#define SECTION_NS_SHIFT (19)
+
+
+#define PAGE_L1_DESCRIPTOR (0x1)
+#define PAGE_L1_MASK (0xFFFFFFFC)
+
+#define PAGE_L2_4K_DESC (0x2)
+#define PAGE_L2_4K_MASK (0xFFFFFFFD)
+
+#define PAGE_L2_64K_DESC (0x1)
+#define PAGE_L2_64K_MASK (0xFFFFFFFC)
+
+#define PAGE_4K_TEXCB_MASK (0xFFFFFE33)
+#define PAGE_4K_B_SHIFT (2)
+#define PAGE_4K_C_SHIFT (3)
+#define PAGE_4K_TEX0_SHIFT (6)
+#define PAGE_4K_TEX1_SHIFT (7)
+#define PAGE_4K_TEX2_SHIFT (8)
+
+#define PAGE_64K_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_64K_B_SHIFT (2)
+#define PAGE_64K_C_SHIFT (3)
+#define PAGE_64K_TEX0_SHIFT (12)
+#define PAGE_64K_TEX1_SHIFT (13)
+#define PAGE_64K_TEX2_SHIFT (14)
+
+#define PAGE_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_B_SHIFT (2)
+#define PAGE_C_SHIFT (3)
+#define PAGE_TEX_SHIFT (12)
+
+#define PAGE_XN_4K_MASK (0xFFFFFFFE)
+#define PAGE_XN_4K_SHIFT (0)
+#define PAGE_XN_64K_MASK (0xFFFF7FFF)
+#define PAGE_XN_64K_SHIFT (15)
+
+
+#define PAGE_DOMAIN_MASK (0xFFFFFE1F)
+#define PAGE_DOMAIN_SHIFT (5)
+
+#define PAGE_P_MASK (0xFFFFFDFF)
+#define PAGE_P_SHIFT (9)
+
+#define PAGE_AP_MASK (0xFFFFFDCF)
+#define PAGE_AP_SHIFT (4)
+#define PAGE_AP2_SHIFT (9)
+
+#define PAGE_S_MASK (0xFFFFFBFF)
+#define PAGE_S_SHIFT (10)
+
+#define PAGE_NG_MASK (0xFFFFF7FF)
+#define PAGE_NG_SHIFT (11)
+
+#define PAGE_NS_MASK (0xFFFFFFF7)
+#define PAGE_NS_SHIFT (3)
+
+#define OFFSET_1M (0x00100000)
+#define OFFSET_64K (0x00010000)
+#define OFFSET_4K (0x00001000)
+
+#define DESCRIPTOR_FAULT (0x00000000)
+
+/* ########################### MMU Function Access ########################### */
+/** \ingroup MMU_FunctionInterface
+ \defgroup MMU_Functions MMU Functions Interface
+ @{
+ */
+
+/* Attributes enumerations */
+
+/* Region size attributes */
+typedef enum
+{
+ SECTION,
+ PAGE_4k,
+ PAGE_64k,
+} mmu_region_size_Type;
+
+/* Region type attributes */
+typedef enum
+{
+ NORMAL,
+ DEVICE,
+ SHARED_DEVICE,
+ NON_SHARED_DEVICE,
+ STRONGLY_ORDERED
+} mmu_memory_Type;
+
+/* Region cacheability attributes */
+typedef enum
+{
+ NON_CACHEABLE,
+ WB_WA,
+ WT,
+ WB_NO_WA,
+} mmu_cacheability_Type;
+
+/* Region parity check attributes */
+typedef enum
+{
+ ECC_DISABLED,
+ ECC_ENABLED,
+} mmu_ecc_check_Type;
+
+/* Region execution attributes */
+typedef enum
+{
+ EXECUTE,
+ NON_EXECUTE,
+} mmu_execute_Type;
+
+/* Region global attributes */
+typedef enum
+{
+ GLOBAL,
+ NON_GLOBAL,
+} mmu_global_Type;
+
+/* Region shareability attributes */
+typedef enum
+{
+ NON_SHARED,
+ SHARED,
+} mmu_shared_Type;
+
+/* Region security attributes */
+typedef enum
+{
+ SECURE,
+ NON_SECURE,
+} mmu_secure_Type;
+
+/* Region access attributes */
+typedef enum
+{
+ NO_ACCESS,
+ RW,
+ READ,
+} mmu_access_Type;
+
+/* Memory Region definition */
+typedef struct RegionStruct {
+ mmu_region_size_Type rg_t;
+ mmu_memory_Type mem_t;
+ uint8_t domain;
+ mmu_cacheability_Type inner_norm_t;
+ mmu_cacheability_Type outer_norm_t;
+ mmu_ecc_check_Type e_t;
+ mmu_execute_Type xn_t;
+ mmu_global_Type g_t;
+ mmu_secure_Type sec_t;
+ mmu_access_Type priv_t;
+ mmu_access_Type user_t;
+ mmu_shared_Type sh_t;
+
+} mmu_region_attributes_Type;
+
+/** \brief Set section execution-never attribute
+
+ The function sets section execution-never attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] xn Section execution-never attribute : EXECUTE , NON_EXECUTE.
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_section(uint32_t *descriptor_l1, mmu_execute_Type xn)
+{
+ *descriptor_l1 &= SECTION_XN_MASK;
+ *descriptor_l1 |= ((xn & 0x1) << SECTION_XN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section domain
+
+ The function sets section domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Section domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_section(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= SECTION_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xF) << SECTION_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section parity check
+
+ The function sets section parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_section(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set section access privileges
+
+ The function sets section access privileges
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_section(uint32_t *descriptor_l1, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x6; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l1 &= SECTION_AP_MASK;
+ *descriptor_l1 |= (ap & 0x3) << SECTION_AP_SHIFT;
+ *descriptor_l1 |= ((ap & 0x4)>>2) << SECTION_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set section shareability
+
+ The function sets section shareability
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_section(uint32_t *descriptor_l1, mmu_shared_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_S_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Global attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] g_bit Section attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_section(uint32_t *descriptor_l1, mmu_global_Type g_bit)
+{
+ *descriptor_l1 &= SECTION_NG_MASK;
+ *descriptor_l1 |= ((g_bit & 0x1) << SECTION_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Security attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_section(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_NS_SHIFT);
+ return 0;
+}
+
+/* Page 4k or 64k */
+/** \brief Set 4k/64k page execution-never attribute
+
+ The function sets 4k/64k page execution-never attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] xn Page execution-never attribute : EXECUTE , NON_EXECUTE.
+ \param [in] page Page size: PAGE_4k, PAGE_64k,
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_page(uint32_t *descriptor_l2, mmu_execute_Type xn, mmu_region_size_Type page)
+{
+ if (page == PAGE_4k)
+ {
+ *descriptor_l2 &= PAGE_XN_4K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_4K_SHIFT);
+ }
+ else
+ {
+ *descriptor_l2 &= PAGE_XN_64K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_64K_SHIFT);
+ }
+ return 0;
+}
+
+/** \brief Set 4k/64k page domain
+
+ The function sets 4k/64k page domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Page domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_page(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= PAGE_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xf) << PAGE_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page parity check
+
+ The function sets 4k/64k page parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_page(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page access privileges
+
+ The function sets 4k/64k page access privileges
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_page(uint32_t *descriptor_l2, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x6; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l2 &= PAGE_AP_MASK;
+ *descriptor_l2 |= (ap & 0x3) << PAGE_AP_SHIFT;
+ *descriptor_l2 |= ((ap & 0x4)>>2) << PAGE_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page shareability
+
+ The function sets 4k/64k page shareability
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] s_bit 4k/64k page shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_page(uint32_t *descriptor_l2, mmu_shared_Type s_bit)
+{
+ *descriptor_l2 &= PAGE_S_MASK;
+ *descriptor_l2 |= ((s_bit & 0x1) << PAGE_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Global attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] g_bit 4k/64k page attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_page(uint32_t *descriptor_l2, mmu_global_Type g_bit)
+{
+ *descriptor_l2 &= PAGE_NG_MASK;
+ *descriptor_l2 |= ((g_bit & 0x1) << PAGE_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Security attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit 4k/64k page Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_page(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= PAGE_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << PAGE_NS_SHIFT);
+ return 0;
+}
+
+
+/** \brief Set Section memory attributes
+
+ The function sets section memory attributes
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] mem Section memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_section(uint32_t *descriptor_l1, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner)
+{
+ *descriptor_l1 &= SECTION_TEXCB_MASK;
+
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l1 |= 1 << SECTION_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT) | (1 << SECTION_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT) | (1 << SECTION_TEX0_SHIFT);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page memory attributes
+
+ The function sets 4k/64k page memory attributes
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] mem 4k/64k page memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_page(uint32_t *descriptor_l2, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner, mmu_region_size_Type page)
+{
+ *descriptor_l2 &= PAGE_4K_TEXCB_MASK;
+
+ if (page == PAGE_64k)
+ {
+ //same as section
+ __memory_section(descriptor_l2, mem, outer, inner);
+ }
+ else
+ {
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l2 |= 1 << PAGE_4K_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT) | (1 << PAGE_4K_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT) | (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Create a L1 section descriptor
+
+ The function creates a section descriptor.
+
+ Assumptions:
+ - 16MB super sections not suported
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg Section attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_section_descriptor(uint32_t *descriptor, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+
+ __memory_section(descriptor, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t);
+ __xn_section(descriptor,reg.xn_t);
+ __domain_section(descriptor, reg.domain);
+ __p_section(descriptor, reg.e_t);
+ __ap_section(descriptor, reg.priv_t, reg.user_t, 1);
+ __shared_section(descriptor,reg.sh_t);
+ __global_section(descriptor,reg.g_t);
+ __secure_section(descriptor,reg.sec_t);
+ *descriptor &= SECTION_MASK;
+ *descriptor |= SECTION_DESCRIPTOR;
+
+ return 0;
+
+}
+
+
+/** \brief Create a L1 and L2 4k/64k page descriptor
+
+ The function creates a 4k/64k page descriptor.
+ Assumptions:
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg 4k/64k page attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_page_descriptor(uint32_t *descriptor, uint32_t *descriptor2, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+ *descriptor2 = 0;
+
+ switch (reg.rg_t)
+ {
+ case PAGE_4k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_4k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_4k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_4K_MASK;
+ *descriptor2 |= PAGE_L2_4K_DESC;
+ break;
+
+ case PAGE_64k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_64k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_64k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_64K_MASK;
+ *descriptor2 |= PAGE_L2_64K_DESC;
+ break;
+
+ case SECTION:
+ //error
+ break;
+
+ }
+
+ return 0;
+
+}
+
+/** \brief Create a 1MB Section
+
+ \param [in] ttb Translation table base address
+ \param [in] base_address Section base address
+ \param [in] count Number of sections to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTSection(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1)
+{
+ uint32_t offset;
+ uint32_t entry;
+ uint32_t i;
+
+ offset = base_address >> 20;
+ entry = (base_address & 0xFFF00000) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb = ttb + offset;
+
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb++ = entry;
+ entry += OFFSET_1M;
+ }
+}
+
+/** \brief Create a 4k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 4k base address
+ \param [in] count Number of 4k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_4k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFFF000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_4K;
+ }
+}
+
+/** \brief Create a 64k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 64k base address
+ \param [in] count Number of 64k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_64k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i,j;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFF0000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //create 16 entries
+ for (j = 0; j < 16; j++)
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_64K;
+ }
+}
+
+/*@} end of MMU_Functions */
+#endif
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC4088_DM/core_cm0.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,682 @@
+/**************************************************************************//**
+ * @file core_cm0.h
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M0
+ @{
+ */
+
+/* CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC4088_DM/core_cm0plus.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,793 @@
+/**************************************************************************//**
+ * @file core_cm0plus.h
+ * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0PLUS_H_GENERIC
+#define __CORE_CM0PLUS_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex-M0+
+ @{
+ */
+
+/* CMSIS CM0P definitions */
+#define __CM0PLUS_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0PLUS_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16) | \
+ __CM0PLUS_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0PLUS_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0PLUS_H_DEPENDANT
+#define __CORE_CM0PLUS_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0PLUS_REV
+ #define __CM0PLUS_REV 0x0000
+ #warning "__CM0PLUS_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __VTOR_PRESENT
+ #define __VTOR_PRESENT 0
+ #warning "__VTOR_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex-M0+ */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+#if (__VTOR_PRESENT == 1)
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+#else
+ uint32_t RESERVED0;
+#endif
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if (__VTOR_PRESENT == 1)
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 8 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 8 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0+ Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0PLUS_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC4088_DM/core_cm3.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1627 @@
+/**************************************************************************//**
+ * @file core_cm3.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM3_H_GENERIC
+#define __CORE_CM3_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M3
+ @{
+ */
+
+/* CMSIS CM3 definitions */
+#define __CM3_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | \
+ __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x03) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI__VFP_SUPPORT____
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM3_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM3_H_DEPENDANT
+#define __CORE_CM3_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM3_REV
+ #define __CM3_REV 0x0200
+ #warning "__CM3_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M3 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#if (__CM3_REV < 0x0201) /* core r2p1 */
+#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#else
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+#else
+ uint32_t RESERVED1[1];
+#endif
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM3_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC4088_DM/core_cm4.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1772 @@
+/**************************************************************************//**
+ * @file core_cm4.h
+ * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_H_GENERIC
+#define __CORE_CM4_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M4
+ @{
+ */
+
+/* CMSIS CM4 definitions */
+#define __CM4_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM4_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16) | \
+ __CM4_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x04) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+#include <core_cm4_simd.h> /* Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CM4_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM4_H_DEPENDANT
+#define __CORE_CM4_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM4_REV
+ #define __CM4_REV 0x0000
+ #warning "__CM4_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 0
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M4 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ - Core FPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISOOFP_Pos 9 /*!< ACTLR: DISOOFP Position */
+#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */
+
+#define SCnSCB_ACTLR_DISFPCA_Pos 8 /*!< ACTLR: DISFPCA Position */
+#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_FPU Floating Point Unit (FPU)
+ \brief Type definitions for the Floating Point Unit (FPU)
+ @{
+ */
+
+/** \brief Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __IO uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
+ __IO uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
+ __IO uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
+ __I uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
+ __I uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register */
+#define FPU_FPCCR_ASPEN_Pos 31 /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos 30 /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos 8 /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos 6 /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos 5 /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos 4 /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos 3 /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos 1 /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos 0 /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk (1UL << FPU_FPCCR_LSPACT_Pos) /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register */
+#define FPU_FPCAR_ADDRESS_Pos 3 /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register */
+#define FPU_FPDSCR_AHP_Pos 26 /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos 25 /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos 24 /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos 22 /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 */
+#define FPU_MVFR0_FP_rounding_modes_Pos 28 /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos 24 /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos 20 /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos 16 /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos 12 /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos 8 /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos 4 /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos 0 /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL << FPU_MVFR0_A_SIMD_registers_Pos) /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 */
+#define FPU_MVFR1_FP_fused_MAC_Pos 28 /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos 24 /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos 4 /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos 0 /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk (0xFUL << FPU_MVFR1_FtZ_mode_Pos) /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+#if (__FPU_PRESENT == 1)
+ #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
+ #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+/* NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); enable interrupt */
+ NVIC->ISER[(uint32_t)((int32_t)IRQn) >> 5] = (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM4_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC4088_DM/core_cm4_simd.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,673 @@
+/**************************************************************************//**
+ * @file core_cm4_simd.h
+ * @brief CMSIS Cortex-M4 SIMD Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_SIMD_H
+#define __CORE_CM4_SIMD_H
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ ******************************************************************************/
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#define __SADD8 __sadd8
+#define __QADD8 __qadd8
+#define __SHADD8 __shadd8
+#define __UADD8 __uadd8
+#define __UQADD8 __uqadd8
+#define __UHADD8 __uhadd8
+#define __SSUB8 __ssub8
+#define __QSUB8 __qsub8
+#define __SHSUB8 __shsub8
+#define __USUB8 __usub8
+#define __UQSUB8 __uqsub8
+#define __UHSUB8 __uhsub8
+#define __SADD16 __sadd16
+#define __QADD16 __qadd16
+#define __SHADD16 __shadd16
+#define __UADD16 __uadd16
+#define __UQADD16 __uqadd16
+#define __UHADD16 __uhadd16
+#define __SSUB16 __ssub16
+#define __QSUB16 __qsub16
+#define __SHSUB16 __shsub16
+#define __USUB16 __usub16
+#define __UQSUB16 __uqsub16
+#define __UHSUB16 __uhsub16
+#define __SASX __sasx
+#define __QASX __qasx
+#define __SHASX __shasx
+#define __UASX __uasx
+#define __UQASX __uqasx
+#define __UHASX __uhasx
+#define __SSAX __ssax
+#define __QSAX __qsax
+#define __SHSAX __shsax
+#define __USAX __usax
+#define __UQSAX __uqsax
+#define __UHSAX __uhsax
+#define __USAD8 __usad8
+#define __USADA8 __usada8
+#define __SSAT16 __ssat16
+#define __USAT16 __usat16
+#define __UXTB16 __uxtb16
+#define __UXTAB16 __uxtab16
+#define __SXTB16 __sxtb16
+#define __SXTAB16 __sxtab16
+#define __SMUAD __smuad
+#define __SMUADX __smuadx
+#define __SMLAD __smlad
+#define __SMLADX __smladx
+#define __SMLALD __smlald
+#define __SMLALDX __smlaldx
+#define __SMUSD __smusd
+#define __SMUSDX __smusdx
+#define __SMLSD __smlsd
+#define __SMLSDX __smlsdx
+#define __SMLSLD __smlsld
+#define __SMLSLDX __smlsldx
+#define __SEL __sel
+#define __QADD __qadd
+#define __QSUB __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
+ ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
+
+#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
+ ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
+
+#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+ ((int64_t)(ARG3) << 32) ) >> 32))
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_iar.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_ccs.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLALD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLALDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLSLD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLSLDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ if (ARG3 == 0) \
+ __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
+ else \
+ __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+/* not yet supported */
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CORE_CM4_SIMD_H */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC4088_DM/core_cmFunc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,636 @@
+/**************************************************************************//**
+ * @file core_cmFunc.h
+ * @brief CMSIS Cortex-M Core Function Access Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ register uint32_t __regIPSR __ASM("ipsr");
+ return(__regIPSR);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ register uint32_t __regXPSR __ASM("xpsr");
+ return(__regXPSR);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ return(__regProcessStackPointer);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ __regProcessStackPointer = topOfProcStack;
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ return(__regMainStackPointer);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ __regMainStackPointer = topOfMainStack;
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0xff);
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/** \brief Enable IRQ Interrupts
+
+ This function enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ uint32_t result;
+
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all instrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CMFUNC_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC4088_DM/core_cmInstr.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,688 @@
+/**************************************************************************//**
+ * @file core_cmInstr.h
+ * @brief CMSIS Cortex-M Core Instruction Access Header File
+ * @version V3.20
+ * @date 05. March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __nop
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+#define __WFI __wfi
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __wfe
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __sev
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+#define __ISB() __isb(0xF)
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() __dsb(0xF)
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() __dmb(0xF)
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __rev
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+ rev16 r0, r0
+ bx lr
+}
+#endif
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+ revsh r0, r0
+ bx lr
+}
+#endif
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+#define __ROR __ror
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __breakpoint(value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __RBIT __rbit
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXB(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXH(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXW(value, ptr) __strex(value, ptr)
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+#define __CLREX __clrex
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT __ssat
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __usat
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __clz
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constrant "l"
+ * Otherwise, use general registers, specified by constrant "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __NOP(void)
+{
+ __ASM volatile ("nop");
+}
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFI(void)
+{
+ __ASM volatile ("wfi");
+}
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFE(void)
+{
+ __ASM volatile ("wfe");
+}
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __SEV(void)
+{
+ __ASM volatile ("sev");
+}
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ISB(void)
+{
+ __ASM volatile ("isb");
+}
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DSB(void)
+{
+ __ASM volatile ("dsb");
+}
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void)
+{
+ __ASM volatile ("dmb");
+}
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+ return __builtin_bswap32(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ return (short)__builtin_bswap16(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32 - op2));
+}
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void)
+{
+ __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC4088_DM/sys_helper.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,16 @@
+#ifndef SYS_HELPER_H
+#define SYS_HELPER_H
+
+#include <stdint.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+uint32_t __reserved_stack_size();
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC4088_DM/system_LPC407x_8x_177x_8x.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,89 @@
+/**********************************************************************
+* $Id$ system_LPC407x_8x_177x_8x.h 2011-06-02
+*//**
+* @file system_LPC407x_8x_177x_8x.h
+* @brief CMSIS Cortex-M3 Device Peripheral Access Layer Source File
+* for the NXP LPC Device Series
+* @version 1.0
+* @date 02. June. 2011
+* @author NXP MCU SW Application Team
+*
+* Copyright(C) 2011, NXP Semiconductor
+* All rights reserved.
+*
+***********************************************************************
+* Software that is described herein is for illustrative purposes only
+* which provides customers with programming information regarding the
+* products. This software is supplied "AS IS" without any warranties.
+* NXP Semiconductors assumes no responsibility or liability for the
+* use of the software, conveys no license or title under any patent,
+* copyright, or mask work right to the product. NXP Semiconductors
+* reserves the right to make changes in the software without
+* notification. NXP Semiconductors also make no representation or
+* warranty that such application will be suitable for the specified
+* use without further testing or modification.
+* Permission to use, copy, modify, and distribute this software and its
+* documentation is hereby granted, under NXP Semiconductors'
+* relevant copyright in the software, without fee, provided that it
+* is used in conjunction with NXP Semiconductors microcontrollers. This
+* copyright, permission, and disclaimer notice must appear in all copies of
+* this code.
+**********************************************************************/
+
+#ifndef __SYSTEM_LPC407x_8x_177x_8x_H
+#define __SYSTEM_LPC407x_8x_177x_8x_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+extern uint32_t PeripheralClock; /*!< Peripheral Clock Frequency (Pclk) */
+extern uint32_t EMCClock; /*!< EMC Clock */
+extern uint32_t USBClock; /*!< USB Frequency */
+
+
+/**
+ * Initialize the system
+ *
+ * @param none
+ * @return none
+ *
+ * @brief Setup the microcontroller system.
+ * Initialize the System and update the SystemCoreClock variable.
+ */
+extern void SystemInit (void);
+
+/**
+ * Update SystemCoreClock variable
+ *
+ * @param none
+ * @return none
+ *
+ * @brief Updates the SystemCoreClock with current core Clock
+ * retrieved from cpu registers.
+ */
+extern void SystemCoreClockUpdate (void);
+
+/*----------------------------------------------------------------------------
+ Define clocks
+ *----------------------------------------------------------------------------*/
+#define XTAL (12000000UL) /* Oscillator frequency */
+#define OSC_CLK ( XTAL) /* Main oscillator frequency */
+#define RTC_CLK ( 32768UL) /* RTC oscillator frequency */
+#define IRC_OSC (12000000UL) /* Internal RC oscillator frequency */
+#define WDT_OSC ( 500000UL) /* Internal WDT oscillator frequency */
+
+
+
+/*
+//-------- <<< end of configuration section >>> ------------------------------
+*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __SYSTEM_LPC407x_8x_177x_8x_H */
--- a/TARGET_LPC4337/TARGET_NXP/TARGET_LPC43XX/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_LPC4337/TARGET_NXP/TARGET_LPC43XX/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -45,6 +45,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_LPC4337/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_LPC4337/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_LPC4337/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_LPC4337/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_LPC4337/TOOLCHAIN_ARM_STD/startup_LPC4337.o has changed
Binary file TARGET_LPC4337/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_LPC4337/TOOLCHAIN_ARM_STD/system_LPC43xx.o has changed
--- a/TARGET_LPC812/TARGET_NXP/TARGET_LPC81X/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_LPC812/TARGET_NXP/TARGET_LPC81X/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -45,6 +45,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_LPC812/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_LPC812/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_LPC812/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_LPC812/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_LPC812/TOOLCHAIN_ARM_MICRO/startup_LPC8xx.o has changed
Binary file TARGET_LPC812/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_LPC812/TOOLCHAIN_ARM_MICRO/system_LPC8xx.o has changed
--- a/TARGET_LPC812/TOOLCHAIN_IAR/LPC812.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_LPC812/TOOLCHAIN_IAR/LPC812.icf Tue Feb 03 15:31:20 2015 +0000
@@ -6,7 +6,9 @@
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x00003FFF;
-define symbol __ICFEDIT_region_RAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_NVIC_start__ = 0x10000000;
+define symbol __ICFEDIT_region_NVIC_end__ = 0x100000BF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x100000C0;
define symbol __ICFEDIT_region_RAM_end__ = 0x10000FFF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x200;
@@ -30,5 +32,5 @@
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
- block CSTACK, block HEAP };
+ block HEAP, block CSTACK };
place in CRP_region { section .crp };
Binary file TARGET_LPC812/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_LPC812/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_LPC812/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_LPC812/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_LPC812/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_LPC812/TOOLCHAIN_IAR/startup_LPC8xx.o has changed
Binary file TARGET_LPC812/TOOLCHAIN_IAR/system_LPC8xx.o has changed
--- a/TARGET_LPC812/system_LPC8xx.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_LPC812/system_LPC8xx.h Tue Feb 03 15:31:20 2015 +0000 @@ -30,6 +30,7 @@ #include <stdint.h> +extern uint32_t MainClock; /*!< Main Clock Frequency */ extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
--- a/TARGET_LPC824/TARGET_NXP/TARGET_LPC82X/TARGET_LPC824/PeripheralNames.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_LPC824/TARGET_NXP/TARGET_LPC82X/TARGET_LPC824/PeripheralNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -30,7 +30,7 @@
#define MBED_UART0 P0_7, P0_18
#define MBED_UARTUSB USBTX, USBRX
-#define MBED_I2C0 P0_10, P0_11
+#define MBED_I2C0 P0_11, P0_10
typedef enum {
ADC_0 = 0,
--- a/TARGET_LPC824/TARGET_NXP/TARGET_LPC82X/TARGET_LPC824/PinNames.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_LPC824/TARGET_NXP/TARGET_LPC82X/TARGET_LPC824/PinNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -102,10 +102,10 @@
USBRX = P0_18,
// I2C pins
- SDA = P0_10,
- SCL = P0_11,
- I2C_SDA = P0_10,
- I2C_SCL = P0_11,
+ SCL = P0_10,
+ SDA = P0_11,
+ I2C_SCL = P0_10,
+ I2C_SDA = P0_11,
// Not connected
NC = (int)0xFFFFFFFF,
--- a/TARGET_LPC824/TARGET_NXP/TARGET_LPC82X/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_LPC824/TARGET_NXP/TARGET_LPC82X/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -47,6 +47,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_LPC824/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_LPC824/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_LPC824/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_LPC824/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_LPC824/TOOLCHAIN_ARM_MICRO/startup_LPC8xx.o has changed
Binary file TARGET_LPC824/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_LPC824/TOOLCHAIN_ARM_MICRO/system_LPC8xx.o has changed
--- a/TARGET_MTS_MDOT_F405RG/TARGET_STM/TARGET_MTS_MDOT_F405RG/PeripheralNames.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,91 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE,
- ADC_2 = (int)ADC2_BASE,
- ADC_3 = (int)ADC3_BASE
-} ADCName;
-
-typedef enum {
- DAC_0 = 0,
- DAC_1
-} DACName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_3 = (int)USART3_BASE,
- UART_4 = (int)UART4_BASE,
- UART_5 = (int)UART5_BASE,
- UART_6 = (int)USART6_BASE,
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_8 = (int)TIM8_BASE,
- PWM_9 = (int)TIM9_BASE,
- PWM_10 = (int)TIM10_BASE,
- PWM_11 = (int)TIM11_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/TARGET_MTS_MDOT_F405RG/TARGET_STM/TARGET_MTS_MDOT_F405RG/PinNames.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,157 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_11 = 0x1B,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PH_0 = 0x70,
- PH_1 = 0x71,
-
- // Generic signals namings
- LED1 = PA_9,
- LED2 = PA_9,
- LED3 = PA_9,
- LED4 = PA_9,
- SERIAL_TX = PA_9,
- SERIAL_RX = PA_10,
- I2C_SCL = PA_8,
- I2C_SDA = PC_9,
- SPI_MOSI = PC_12,
- SPI_MISO = PC_11,
- SPI_SCK = PC_10,
- SPI_CS = PC_13,
- PWM0 = PA_8,
- PWM1 = PC_9,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/TARGET_MTS_MDOT_F405RG/TARGET_STM/TARGET_MTS_MDOT_F405RG/PortNames.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,48 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortH = 7
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/TARGET_MTS_MDOT_F405RG/TARGET_STM/TARGET_MTS_MDOT_F405RG/device.h Thu Nov 27 13:33:22 2014 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 1 - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/TARGET_MTS_MDOT_F405RG/TARGET_STM/TARGET_MTS_MDOT_F405RG/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,69 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_GPIO_OBJECT_H
-#define MBED_GPIO_OBJECT_H
-
-#include "mbed_assert.h"
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct {
- PinName pin;
- uint32_t mask;
- __IO uint32_t *reg_in;
- __IO uint16_t *reg_set;
- __IO uint16_t *reg_clr;
-} gpio_t;
-
-static inline void gpio_write(gpio_t *obj, int value) {
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (value) {
- *obj->reg_set = obj->mask;
- } else {
- *obj->reg_clr = obj->mask;
- }
-}
-
-static inline int gpio_read(gpio_t *obj) {
- MBED_ASSERT(obj->pin != (PinName)NC);
- return ((*obj->reg_in & obj->mask) ? 1 : 0);
-}
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/TARGET_MTS_MDOT_F405RG/TARGET_STM/TARGET_MTS_MDOT_F405RG/objects.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,109 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
-};
-
-struct dac_s {
- DACName dac;
- PinName channel;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_MTS_MDOT_F405RG/TARGET_STM/TARGET_STM32F4/PeripheralPins.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,66 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_PERIPHERALPINS_H +#define MBED_PERIPHERALPINS_H + +#include "pinmap.h" +#include "PeripheralNames.h" + +//*** ADC *** + +extern const PinMap PinMap_ADC[]; + +//*** DAC *** + +extern const PinMap PinMap_DAC[]; + +//*** I2C *** + +extern const PinMap PinMap_I2C_SDA[]; +extern const PinMap PinMap_I2C_SCL[]; + +//*** PWM *** + +extern const PinMap PinMap_PWM[]; + +//*** SERIAL *** + +extern const PinMap PinMap_UART_TX[]; +extern const PinMap PinMap_UART_RX[]; + +//*** SPI *** + +extern const PinMap PinMap_SPI_MOSI[]; +extern const PinMap PinMap_SPI_MISO[]; +extern const PinMap PinMap_SPI_SCLK[]; +extern const PinMap PinMap_SPI_SSEL[]; + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F405RG/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F405RG/PeripheralNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,91 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE,
+ ADC_2 = (int)ADC2_BASE,
+ ADC_3 = (int)ADC3_BASE
+} ADCName;
+
+typedef enum {
+ DAC_0 = 0,
+ DAC_1
+} DACName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE,
+ UART_3 = (int)USART3_BASE,
+ UART_4 = (int)UART4_BASE,
+ UART_5 = (int)UART5_BASE,
+ UART_6 = (int)USART6_BASE,
+} UARTName;
+
+#define STDIO_UART_TX PA_2
+#define STDIO_UART_RX PA_3
+#define STDIO_UART UART_2
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE,
+ SPI_3 = (int)SPI3_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE,
+ I2C_3 = (int)I2C3_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_2 = (int)TIM2_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_4 = (int)TIM4_BASE,
+ PWM_5 = (int)TIM5_BASE,
+ PWM_8 = (int)TIM8_BASE,
+ PWM_9 = (int)TIM9_BASE,
+ PWM_10 = (int)TIM10_BASE,
+ PWM_11 = (int)TIM11_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F405RG/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F405RG/PinNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,157 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_11 = 0x1B,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_2 = 0x32,
+
+ PH_0 = 0x70,
+ PH_1 = 0x71,
+
+ // Generic signals namings
+ LED1 = PA_9,
+ LED2 = PA_9,
+ LED3 = PA_9,
+ LED4 = PA_9,
+ SERIAL_TX = PA_9,
+ SERIAL_RX = PA_10,
+ I2C_SCL = PA_8,
+ I2C_SDA = PC_9,
+ SPI_MOSI = PC_12,
+ SPI_MISO = PC_11,
+ SPI_SCK = PC_10,
+ SPI_CS = PC_13,
+ PWM0 = PA_8,
+ PWM1 = PC_9,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F405RG/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F405RG/PortNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,52 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortE = 4,
+ PortF = 5,
+ PortG = 6,
+ PortH = 7,
+ PortI = 8
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_MTS_MDOT_F405RG/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F405RG/device.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,70 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 1 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F405RG/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F405RG/objects.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,110 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+};
+
+struct dac_s {
+ DACName dac;
+ PinName channel;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index; // Used by irq
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+ uint32_t slave;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t period;
+ uint32_t pulse;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F405RG/TARGET_STM/TARGET_STM32F4/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,75 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_GPIO_OBJECT_H
+#define MBED_GPIO_OBJECT_H
+
+#include "mbed_assert.h"
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ uint32_t mask;
+ __IO uint32_t *reg_in;
+ __IO uint16_t *reg_set;
+ __IO uint16_t *reg_clr;
+} gpio_t;
+
+static inline void gpio_write(gpio_t *obj, int value)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ if (value) {
+ *obj->reg_set = obj->mask;
+ } else {
+ *obj->reg_clr = obj->mask;
+ }
+}
+
+static inline int gpio_read(gpio_t *obj)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ return ((*obj->reg_in & obj->mask) ? 1 : 0);
+}
+
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/startup_stm32f405xx.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_adc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_can.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_crc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dac.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_eth.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hash.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_irda.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_nand.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_nor.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rng.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sai.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sd.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_spi.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sram.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_tim.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_uart.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_usart.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_usb.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_MICRO/system_stm32f4xx.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/startup_stm32f405xx.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_can.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_crc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_eth.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_irda.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nand.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nor.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rng.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sai.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sd.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_spi.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sram.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_uart.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_usart.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/stm32f4xx_ll_usb.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_ARM_STD/system_stm32f4xx.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/hal_tick.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/startup_STM32F40x.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_adc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_can.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_crc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dac.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dma.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_eth.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_flash.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_hash.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_irda.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_nand.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_nor.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rng.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_sai.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_sd.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_spi.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_sram.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_tim.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_uart.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_usart.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/stm32f4xx_ll_usb.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_GCC_ARM/system_stm32f4xx.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/startup_stm32f405xx.o has changed
--- a/TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f405xx.icf Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f405xx.icf Tue Feb 03 15:31:20 2015 +0000 @@ -14,8 +14,8 @@ define symbol __ICFEDIT_region_CCMRAM_start__ = 0x10000000; define symbol __ICFEDIT_region_CCMRAM_end__ = 0x1000FFFF; /*-Sizes-*/ -define symbol __ICFEDIT_size_cstack__ = 0x400; -define symbol __ICFEDIT_size_heap__ = 0x8000; +define symbol __ICFEDIT_size_cstack__ = 0x2000; +define symbol __ICFEDIT_size_heap__ = 0x2000; /**** End of ICF editor section. ###ICF###*/
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_adc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_can.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_crc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_dac.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_dma.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_eth.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_flash.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_hash.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_irda.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_nand.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_nor.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_rng.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_sai.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_sd.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_spi.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_sram.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_tim.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_uart.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_usart.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/stm32f4xx_ll_usb.o has changed
Binary file TARGET_MTS_MDOT_F405RG/TOOLCHAIN_IAR/system_stm32f4xx.o has changed
--- a/TARGET_MTS_MDOT_F405RG/stm32f4xx_hal_rcc.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_MTS_MDOT_F405RG/stm32f4xx_hal_rcc.h Tue Feb 03 15:31:20 2015 +0000 @@ -530,6 +530,8 @@ #define __GPIOC_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOCEN)) #define __GPIOD_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIODEN)) #define __GPIOE_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOEEN)) +#define __GPIOF_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOFEN)) +#define __GPIOG_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOGEN)) #define __GPIOH_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOHEN)) #define __CRC_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_CRCEN)) #define __BKPSRAM_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_BKPSRAMEN)) @@ -542,6 +544,8 @@ #define __GPIOC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOCEN)) #define __GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) #define __GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) +#define __GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN)) +#define __GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN)) #define __GPIOH_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOHEN)) #define __CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) #define __BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_MTS_MDOT_F411RE/TARGET_STM/TARGET_STM32F4/PeripheralPins.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,66 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_PERIPHERALPINS_H +#define MBED_PERIPHERALPINS_H + +#include "pinmap.h" +#include "PeripheralNames.h" + +//*** ADC *** + +extern const PinMap PinMap_ADC[]; + +//*** DAC *** + +extern const PinMap PinMap_DAC[]; + +//*** I2C *** + +extern const PinMap PinMap_I2C_SDA[]; +extern const PinMap PinMap_I2C_SCL[]; + +//*** PWM *** + +extern const PinMap PinMap_PWM[]; + +//*** SERIAL *** + +extern const PinMap PinMap_UART_TX[]; +extern const PinMap PinMap_UART_RX[]; + +//*** SPI *** + +extern const PinMap PinMap_SPI_MOSI[]; +extern const PinMap PinMap_SPI_MISO[]; +extern const PinMap PinMap_SPI_SCLK[]; +extern const PinMap PinMap_SPI_SSEL[]; + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F411RE/PeripheralNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,82 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE
+} ADCName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE,
+ UART_6 = (int)USART6_BASE
+} UARTName;
+
+#define STDIO_UART_TX PA_2
+#define STDIO_UART_RX PA_3
+#define STDIO_UART UART_2
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE,
+ SPI_3 = (int)SPI3_BASE,
+ SPI_4 = (int)SPI4_BASE,
+ SPI_5 = (int)SPI5_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE,
+ I2C_3 = (int)I2C3_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_2 = (int)TIM2_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_4 = (int)TIM4_BASE,
+ PWM_5 = (int)TIM5_BASE,
+ PWM_9 = (int)TIM9_BASE,
+ PWM_10 = (int)TIM10_BASE,
+ PWM_11 = (int)TIM11_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F411RE/PinNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,184 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_2 = 0x32,
+
+ PH_0 = 0x70,
+ PH_1 = 0x71,
+
+ // Generic signals namings
+ DOUT = PA_2,
+ DIN = PA_3,
+ AD0 = PB_1,
+ AD1 = PB_0,
+ AD2 = PA_5,
+ AD3 = PA_4,
+ AD4 = PA_7,
+ AD5 = PC_1,
+ AD6 = PA_1,
+ DIO0 = PB_1,
+ DIO1 = PB_0,
+ DIO2 = PA_5,
+ DIO3 = PA_4,
+ DIO4 = PA_7,
+ DIO5 = PC_1,
+ DIO6 = PA_1,
+ DO8 = PA_6,
+ DI8 = PA_11,
+ PWM0 = PA_8,
+ PWM1 = PC_9,
+ NCTS = PA_0,
+ RTS = PA_1,
+ NDTR = PA_11,
+ RSSI = PA_8,
+ SLEEPRQ = PA_11,
+ ON_SLEEP = PA_12,
+ ASSOCIATE = PC_1,
+
+ LED1 = PA_2,
+ LED2 = PA_2,
+ LED3 = PA_2,
+ LED4 = PA_2,
+ SERIAL_TX = PA_9,
+ SERIAL_RX = PA_10,
+ USBTX = PA_2,
+ USBRX = PA_3,
+ I2C_SCL = PA_8,
+ I2C_SDA = PC_9,
+ SPI_MOSI = PA_7,
+ SPI_MISO = PA_6,
+ SPI_SCK = PA_5,
+ SPI_CS = PA_4,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F411RE/PortNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,49 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortE = 4,
+ PortH = 7
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_MTS_MDOT_F411RE/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F411RE/device.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,70 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 // Not present on this device + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/TARGET_STM/TARGET_STM32F4/TARGET_MTS_MDOT_F411RE/objects.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,105 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index; // Used by irq
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+ uint32_t slave;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t period;
+ uint32_t pulse;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/TARGET_STM/TARGET_STM32F4/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,75 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_GPIO_OBJECT_H
+#define MBED_GPIO_OBJECT_H
+
+#include "mbed_assert.h"
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ uint32_t mask;
+ __IO uint32_t *reg_in;
+ __IO uint16_t *reg_set;
+ __IO uint16_t *reg_clr;
+} gpio_t;
+
+static inline void gpio_write(gpio_t *obj, int value)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ if (value) {
+ *obj->reg_set = obj->mask;
+ } else {
+ *obj->reg_clr = obj->mask;
+ }
+}
+
+static inline int gpio_read(gpio_t *obj)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ return ((*obj->reg_in & obj->mask) ? 1 : 0);
+}
+
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/startup_stm32f411xe.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f411re.sct Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,45 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2014, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32F411RE: 512 KB FLASH (0x80000) + 128 KB SRAM (0x20000)
+LR_IROM1 0x08000000 0x80000 { ; load region size_region
+
+ ER_IROM1 0x08000000 0x80000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; Total: 102 vectors = 408 bytes (0x198) to be reserved in RAM
+ RW_IRAM1 (0x20000000+0x198) (0x20000-0x198) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+}
+
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_adc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_can.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_crc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dac.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_eth.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hash.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_irda.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_nand.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_nor.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rng.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sai.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sd.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_spi.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sram.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_tim.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_uart.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_usart.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_usb.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_MICRO/system_stm32f4xx.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/startup_stm32f411xe.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f411re.sct Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,45 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2014, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32F411RE: 512 KB FLASH (0x80000) + 128 KB SRAM (0x20000)
+LR_IROM1 0x08000000 0x80000 { ; load region size_region
+
+ ER_IROM1 0x08000000 0x80000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; Total: 102 vectors = 408 bytes (0x198) to be reserved in RAM
+ RW_IRAM1 (0x20000000+0x198) (0x20000-0x198) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+}
+
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_can.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_crc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_eth.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_irda.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nand.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nor.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rng.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sai.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sd.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_spi.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sram.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_uart.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_usart.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_usb.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_ARM_STD/system_stm32f4xx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/STM32F411XE.ld Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,153 @@
+/* Linker script to configure memory regions. */
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K
+ RAM (rwx) : ORIGIN = 0x20000198, LENGTH = 128k - 0x198
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ * _estack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.isr_vector))
+ *(.text*)
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+ _sidata = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ _sdata = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ KEEP(*(.jcr*))
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+ _edata = .;
+
+ } > RAM
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start__ = .;
+ _sbss = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ _ebss = .;
+ } > RAM
+
+ .heap (COPY):
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy (COPY):
+ {
+ *(.stack*)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ _estack = __StackTop;
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/hal_tick.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/startup_stm32f411xe.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_adc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_can.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_crc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dac.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dma.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_eth.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_flash.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_hash.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_irda.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_nand.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_nor.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rng.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_sai.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_sd.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_spi.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_sram.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_tim.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_uart.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_usart.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_ll_usb.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_GCC_ARM/system_stm32f4xx.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/startup_stm32f411xe.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f411xe.icf Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,30 @@
+/* [ROM = 512kb = 0x80000] */
+define symbol __intvec_start__ = 0x08000000;
+define symbol __region_ROM_start__ = 0x08000000;
+define symbol __region_ROM_end__ = 0x0807FFFF;
+
+/* [RAM = 128kb = 0x20000] Vector table dynamic copy: 102 vectors = 408 bytes (0x198) to be reserved in RAM */
+define symbol __NVIC_start__ = 0x20000000;
+define symbol __NVIC_end__ = 0x20000197; /* Aligned on 8 bytes */
+define symbol __region_RAM_start__ = 0x20000198;
+define symbol __region_RAM_end__ = 0x2001FFFF;
+
+/* Memory regions */
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __region_ROM_start__ to __region_ROM_end__];
+define region RAM_region = mem:[from __region_RAM_start__ to __region_RAM_end__];
+
+/* Stack and Heap */
+define symbol __size_cstack__ = 0x400;
+define symbol __size_heap__ = 0x400;
+define block CSTACK with alignment = 8, size = __size_cstack__ { };
+define block HEAP with alignment = 8, size = __size_heap__ { };
+define block STACKHEAP with fixed order { block HEAP, block CSTACK };
+
+initialize by copy with packing = zeros { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite, block STACKHEAP };
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_adc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_can.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_crc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dac.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dma.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_eth.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_flash.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_hash.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_irda.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_nand.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_nor.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_rng.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_sai.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_sd.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_spi.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_sram.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_tim.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_uart.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_usart.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/stm32f4xx_ll_usb.o has changed
Binary file TARGET_MTS_MDOT_F411RE/TOOLCHAIN_IAR/system_stm32f4xx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_MTS_MDOT_F411RE/cmsis.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,38 @@ +/* mbed Microcontroller Library + * A generic CMSIS include header + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_CMSIS_H +#define MBED_CMSIS_H + +#include "stm32f4xx.h" +#include "cmsis_nvic.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/cmsis_nvic.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,55 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+// STM32F411RE
+// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F
+// MCU Peripherals: 86 vectors = 344 bytes from 0x40 to 0x197
+// Total: 102 vectors = 408 bytes (0x198) to be reserved in RAM
+#define NVIC_NUM_VECTORS 102
+#define NVIC_USER_IRQ_OFFSET 16
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
+uint32_t NVIC_GetVector(IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/core_ca9.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,271 @@
+/**************************************************************************//**
+ * @file core_ca9.h
+ * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File
+ * @version
+ * @date 25 March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CA9_H_GENERIC
+#define __CORE_CA9_H_GENERIC
+
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_A9
+ @{
+ */
+
+/* CMSIS CA9 definitions */
+#define __CA9_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CA9_CMSIS_VERSION_SUB (0x10) /*!< [15:0] CMSIS HAL sub version */
+#define __CA9_CMSIS_VERSION ((__CA9_CMSIS_VERSION_MAIN << 16) | \
+ __CA9_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_A (0x09) /*!< Cortex-A Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /*!< standard types definitions */
+#include "core_caInstr.h" /*!< Core Instruction Access */
+#include "core_caFunc.h" /*!< Core Function Access */
+#include "core_cm4_simd.h" /*!< Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CA9_H_DEPENDANT
+#define __CORE_CA9_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CA9_REV
+ #define __CA9_REV 0x0000
+ #warning "__CA9_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 1
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 1
+ #endif
+
+ #if __Vendor_SysTickConfig == 0
+ #error "__Vendor_SysTickConfig set to 0, but vendor systick timer must be supplied for Cortex-A9"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_A9 */
+
+
+/*******************************************************************************
+ * Register Abstraction
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-A processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t reserved1:7; /*!< bit: 20..23 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/*@} end of group CMSIS_CORE */
+
+/*@} end of CMSIS_Core_FPUFunctions */
+
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/core_caFunc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,592 @@
+/**************************************************************************//**
+ * @file core_caFunc.h
+ * @brief CMSIS Cortex-A Core Function Access Header File
+ * @version V3.10
+ * @date 9 May 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CAFUNC_H__
+#define __CORE_CAFUNC_H__
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get CPSR Register
+
+ This function returns the content of the CPSR Register.
+
+ \return CPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_CPSR(void)
+{
+ register uint32_t __regCPSR __ASM("cpsr");
+ return(__regCPSR);
+}
+
+/** \brief Set Stack Pointer
+
+ This function assigns the given value to the current stack pointer.
+
+ \param [in] topOfStack Stack Pointer value to set
+ */
+register uint32_t __regSP __ASM("sp");
+__STATIC_INLINE void __set_SP(uint32_t topOfStack)
+{
+ __regSP = topOfStack;
+}
+
+
+/** \brief Get link register
+
+ This function returns the value of the link register
+
+ \return Value of link register
+ */
+register uint32_t __reglr __ASM("lr");
+__STATIC_INLINE uint32_t __get_LR(void)
+{
+ return(__reglr);
+}
+
+/** \brief Set link register
+
+ This function sets the value of the link register
+
+ \param [in] lr LR value to set
+ */
+__STATIC_INLINE void __set_LR(uint32_t lr)
+{
+ __reglr = lr;
+}
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_PSP(uint32_t topOfProcStack)
+{
+ ARM
+ PRESERVE8
+
+ BIC R0, R0, #7 ;ensure stack is 8-byte aligned
+ MRS R1, CPSR
+ CPS #MODE_SYS ;no effect in USR mode
+ MOV SP, R0
+ MSR CPSR_c, R1 ;no effect in USR mode
+ ISB
+ BX LR
+
+}
+
+/** \brief Set User Mode
+
+ This function changes the processor state to User Mode
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_CPS_USR(void)
+{
+ ARM
+
+ CPS #MODE_USR
+ BX LR
+}
+
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+/** \brief Get FPEXC
+
+ This function returns the current value of the Floating Point Exception Control register.
+
+ \return Floating Point Exception Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPEXC(void)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ return(__regfpexc);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPEXC
+
+ This function assigns the given value to the Floating Point Exception Control register.
+
+ \param [in] fpscr Floating Point Exception Control value to set
+ */
+__STATIC_INLINE void __set_FPEXC(uint32_t fpexc)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ __regfpexc = (fpexc);
+#endif
+}
+
+/** \brief Get CPACR
+
+ This function returns the current value of the Coprocessor Access Control register.
+
+ \return Coprocessor Access Control register value
+ */
+__STATIC_INLINE uint32_t __get_CPACR(void)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ return __regCPACR;
+}
+
+/** \brief Set CPACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] cpacr Coporcessor Acccess Control value to set
+ */
+__STATIC_INLINE void __set_CPACR(uint32_t cpacr)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ __regCPACR = cpacr;
+ __ISB();
+}
+
+/** \brief Get CBAR
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Configuration Base Address register value
+ */
+__STATIC_INLINE uint32_t __get_CBAR() {
+ register uint32_t __regCBAR __ASM("cp15:4:c15:c0:0");
+ return(__regCBAR);
+}
+
+/** \brief Get TTBR0
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Translation Table Base Register 0 value
+ */
+__STATIC_INLINE uint32_t __get_TTBR0() {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ return(__regTTBR0);
+}
+
+/** \brief Set TTBR0
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] ttbr0 Translation Table Base Register 0 value to set
+ */
+__STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ __regTTBR0 = ttbr0;
+ __ISB();
+}
+
+/** \brief Get DACR
+
+ This function returns the value of the Domain Access Control Register.
+
+ \return Domain Access Control Register value
+ */
+__STATIC_INLINE uint32_t __get_DACR() {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ return(__regDACR);
+}
+
+/** \brief Set DACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] dacr Domain Access Control Register value to set
+ */
+__STATIC_INLINE void __set_DACR(uint32_t dacr) {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ __regDACR = dacr;
+ __ISB();
+}
+
+/******************************** Cache and BTAC enable ****************************************************/
+
+/** \brief Set SCTLR
+
+ This function assigns the given value to the System Control Register.
+
+ \param [in] sctlr System Control Register, value to set
+ */
+__STATIC_INLINE void __set_SCTLR(uint32_t sctlr)
+{
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ __regSCTLR = sctlr;
+}
+
+/** \brief Get SCTLR
+
+ This function returns the value of the System Control Register.
+
+ \return System Control Register value
+ */
+__STATIC_INLINE uint32_t __get_SCTLR() {
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ return(__regSCTLR);
+}
+
+/** \brief Enable Caches
+
+ Enable Caches
+ */
+__STATIC_INLINE void __enable_caches(void) {
+ // Set I bit 12 to enable I Cache
+ // Set C bit 2 to enable D Cache
+ __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief Disable Caches
+
+ Disable Caches
+ */
+__STATIC_INLINE void __disable_caches(void) {
+ // Clear I bit 12 to disable I Cache
+ // Clear C bit 2 to disable D Cache
+ __set_SCTLR( __get_SCTLR() & ~(1 << 12) & ~(1 << 2));
+ __ISB();
+}
+
+/** \brief Enable BTAC
+
+ Enable BTAC
+ */
+__STATIC_INLINE void __enable_btac(void) {
+ // Set Z bit 11 to enable branch prediction
+ __set_SCTLR( __get_SCTLR() | (1 << 11));
+ __ISB();
+}
+
+/** \brief Disable BTAC
+
+ Disable BTAC
+ */
+__STATIC_INLINE void __disable_btac(void) {
+ // Clear Z bit 11 to disable branch prediction
+ __set_SCTLR( __get_SCTLR() & ~(1 << 11));
+}
+
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __enable_mmu(void) {
+ // Set M bit 0 to enable the MMU
+ // Set AFE bit to enable simplified access permissions model
+ // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+ __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+ __ISB();
+}
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __disable_mmu(void) {
+ // Clear M bit 0 to disable the MMU
+ __set_SCTLR( __get_SCTLR() & ~1);
+ __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief Invalidate the whole tlb
+
+ TLBIALL. Invalidate the whole tlb
+ */
+
+__STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+ register uint32_t __TLBIALL __ASM("cp15:0:c8:c7:0");
+ __TLBIALL = 0;
+ __DSB();
+ __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief Invalidate entire branch predictor array
+
+ BPIALL. Branch Predictor Invalidate All.
+ */
+
+__STATIC_INLINE void __v7_inv_btac(void) {
+ register uint32_t __BPIALL __ASM("cp15:0:c7:c5:6");
+ __BPIALL = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief Invalidate the whole I$
+
+ ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+__STATIC_INLINE void __v7_inv_icache_all(void) {
+ register uint32_t __ICIALLU __ASM("cp15:0:c7:c5:0");
+ __ICIALLU = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new I cache state
+}
+
+/** \brief Clean D$ by MVA
+
+ DCCMVAC. Data cache clean by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_dcache_mva(void *va) {
+ register uint32_t __DCCMVAC __ASM("cp15:0:c7:c10:1");
+ __DCCMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Invalidate D$ by MVA
+
+ DCIMVAC. Data cache invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_inv_dcache_mva(void *va) {
+ register uint32_t __DCIMVAC __ASM("cp15:0:c7:c6:1");
+ __DCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Clean and Invalidate D$ by MVA
+
+ DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+ register uint32_t __DCCIMVAC __ASM("cp15:0:c7:c14:1");
+ __DCCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief
+ * Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency.
+ */
+#pragma push
+#pragma arm
+__STATIC_ASM void __v7_all_cache(uint32_t op) {
+ ARM
+
+ PUSH {R4-R11}
+
+ MRC p15, 1, R6, c0, c0, 1 // Read CLIDR
+ ANDS R3, R6, #0x07000000 // Extract coherency level
+ MOV R3, R3, LSR #23 // Total cache levels << 1
+ BEQ Finished // If 0, no need to clean
+
+ MOV R10, #0 // R10 holds current cache level << 1
+Loop1 ADD R2, R10, R10, LSR #1 // R2 holds cache "Set" position
+ MOV R1, R6, LSR R2 // Bottom 3 bits are the Cache-type for this level
+ AND R1, R1, #7 // Isolate those lower 3 bits
+ CMP R1, #2
+ BLT Skip // No cache or only instruction cache at this level
+
+ MCR p15, 2, R10, c0, c0, 0 // Write the Cache Size selection register
+ ISB // ISB to sync the change to the CacheSizeID reg
+ MRC p15, 1, R1, c0, c0, 0 // Reads current Cache Size ID register
+ AND R2, R1, #7 // Extract the line length field
+ ADD R2, R2, #4 // Add 4 for the line length offset (log2 16 bytes)
+ LDR R4, =0x3FF
+ ANDS R4, R4, R1, LSR #3 // R4 is the max number on the way size (right aligned)
+ CLZ R5, R4 // R5 is the bit position of the way size increment
+ LDR R7, =0x7FFF
+ ANDS R7, R7, R1, LSR #13 // R7 is the max number of the index size (right aligned)
+
+Loop2 MOV R9, R4 // R9 working copy of the max way size (right aligned)
+
+Loop3 ORR R11, R10, R9, LSL R5 // Factor in the Way number and cache number into R11
+ ORR R11, R11, R7, LSL R2 // Factor in the Set number
+ CMP R0, #0
+ BNE Dccsw
+ MCR p15, 0, R11, c7, c6, 2 // DCISW. Invalidate by Set/Way
+ B cont
+Dccsw CMP R0, #1
+ BNE Dccisw
+ MCR p15, 0, R11, c7, c10, 2 // DCCSW. Clean by Set/Way
+ B cont
+Dccisw MCR p15, 0, R11, c7, c14, 2 // DCCISW, Clean and Invalidate by Set/Way
+cont SUBS R9, R9, #1 // Decrement the Way number
+ BGE Loop3
+ SUBS R7, R7, #1 // Decrement the Set number
+ BGE Loop2
+Skip ADD R10, R10, #2 // increment the cache number
+ CMP R3, R10
+ BGT Loop1
+
+Finished
+ DSB
+ POP {R4-R11}
+ BX lr
+
+}
+#pragma pop
+
+/** \brief __v7_all_cache - helper function
+
+ */
+
+/** \brief Invalidate the whole D$
+
+ DCISW. Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_inv_dcache_all(void) {
+ __v7_all_cache(0);
+}
+
+/** \brief Clean the whole D$
+
+ DCCSW. Clean by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_dcache_all(void) {
+ __v7_all_cache(1);
+}
+
+/** \brief Clean and invalidate the whole D$
+
+ DCCISW. Clean and Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_inv_dcache_all(void) {
+ __v7_all_cache(2);
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__ICCARM__)) /*---------------- ICC Compiler ---------------------*/
+
+#error IAR Compiler support not implemented for Cortex-A
+
+#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
+
+//#error GNU Compiler support not implemented for Cortex-A
+
+#elif (defined (__TASKING__)) /*--------------- TASKING Compiler -----------------*/
+
+#error TASKING Compiler support not implemented for Cortex-A
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CAFUNC_H__ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_MTS_MDOT_F411RE/core_caInstr.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,45 @@ +/**************************************************************************//** + * @file core_caInstr.h + * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File + * @version + * @date 04. December 2012 + * + * @note + * + ******************************************************************************/ +/* Copyright (c) 2009 - 2012 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + +#ifndef __CORE_CAINSTR_H__ +#define __CORE_CAINSTR_H__ + +#define __CORTEX_M 0x3 +#include "core_cmInstr.h" +#undef __CORTEX_M + +#endif +
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/core_ca_mmu.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,848 @@
+;/**************************************************************************//**
+; * @file core_ca_mmu.h
+; * @brief MMU Startup File for
+; * VE_A9_MP Device Series
+; * @version V1.01
+; * @date 25 March 2013
+; *
+; * @note
+; *
+; ******************************************************************************/
+;/* Copyright (c) 2012 ARM LIMITED
+;
+; All rights reserved.
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+; - Redistributions of source code must retain the above copyright
+; notice, this list of conditions and the following disclaimer.
+; - Redistributions in binary form must reproduce the above copyright
+; notice, this list of conditions and the following disclaimer in the
+; documentation and/or other materials provided with the distribution.
+; - Neither the name of ARM nor the names of its contributors may be used
+; to endorse or promote products derived from this software without
+; specific prior written permission.
+; *
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+; ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+; LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+; CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+; SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+; INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+; CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+; ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+; POSSIBILITY OF SUCH DAMAGE.
+; ---------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef _MMU_FUNC_H
+#define _MMU_FUNC_H
+
+#define SECTION_DESCRIPTOR (0x2)
+#define SECTION_MASK (0xFFFFFFFC)
+
+#define SECTION_TEXCB_MASK (0xFFFF8FF3)
+#define SECTION_B_SHIFT (2)
+#define SECTION_C_SHIFT (3)
+#define SECTION_TEX0_SHIFT (12)
+#define SECTION_TEX1_SHIFT (13)
+#define SECTION_TEX2_SHIFT (14)
+
+#define SECTION_XN_MASK (0xFFFFFFEF)
+#define SECTION_XN_SHIFT (4)
+
+#define SECTION_DOMAIN_MASK (0xFFFFFE1F)
+#define SECTION_DOMAIN_SHIFT (5)
+
+#define SECTION_P_MASK (0xFFFFFDFF)
+#define SECTION_P_SHIFT (9)
+
+#define SECTION_AP_MASK (0xFFFF73FF)
+#define SECTION_AP_SHIFT (10)
+#define SECTION_AP2_SHIFT (15)
+
+#define SECTION_S_MASK (0xFFFEFFFF)
+#define SECTION_S_SHIFT (16)
+
+#define SECTION_NG_MASK (0xFFFDFFFF)
+#define SECTION_NG_SHIFT (17)
+
+#define SECTION_NS_MASK (0xFFF7FFFF)
+#define SECTION_NS_SHIFT (19)
+
+
+#define PAGE_L1_DESCRIPTOR (0x1)
+#define PAGE_L1_MASK (0xFFFFFFFC)
+
+#define PAGE_L2_4K_DESC (0x2)
+#define PAGE_L2_4K_MASK (0xFFFFFFFD)
+
+#define PAGE_L2_64K_DESC (0x1)
+#define PAGE_L2_64K_MASK (0xFFFFFFFC)
+
+#define PAGE_4K_TEXCB_MASK (0xFFFFFE33)
+#define PAGE_4K_B_SHIFT (2)
+#define PAGE_4K_C_SHIFT (3)
+#define PAGE_4K_TEX0_SHIFT (6)
+#define PAGE_4K_TEX1_SHIFT (7)
+#define PAGE_4K_TEX2_SHIFT (8)
+
+#define PAGE_64K_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_64K_B_SHIFT (2)
+#define PAGE_64K_C_SHIFT (3)
+#define PAGE_64K_TEX0_SHIFT (12)
+#define PAGE_64K_TEX1_SHIFT (13)
+#define PAGE_64K_TEX2_SHIFT (14)
+
+#define PAGE_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_B_SHIFT (2)
+#define PAGE_C_SHIFT (3)
+#define PAGE_TEX_SHIFT (12)
+
+#define PAGE_XN_4K_MASK (0xFFFFFFFE)
+#define PAGE_XN_4K_SHIFT (0)
+#define PAGE_XN_64K_MASK (0xFFFF7FFF)
+#define PAGE_XN_64K_SHIFT (15)
+
+
+#define PAGE_DOMAIN_MASK (0xFFFFFE1F)
+#define PAGE_DOMAIN_SHIFT (5)
+
+#define PAGE_P_MASK (0xFFFFFDFF)
+#define PAGE_P_SHIFT (9)
+
+#define PAGE_AP_MASK (0xFFFFFDCF)
+#define PAGE_AP_SHIFT (4)
+#define PAGE_AP2_SHIFT (9)
+
+#define PAGE_S_MASK (0xFFFFFBFF)
+#define PAGE_S_SHIFT (10)
+
+#define PAGE_NG_MASK (0xFFFFF7FF)
+#define PAGE_NG_SHIFT (11)
+
+#define PAGE_NS_MASK (0xFFFFFFF7)
+#define PAGE_NS_SHIFT (3)
+
+#define OFFSET_1M (0x00100000)
+#define OFFSET_64K (0x00010000)
+#define OFFSET_4K (0x00001000)
+
+#define DESCRIPTOR_FAULT (0x00000000)
+
+/* ########################### MMU Function Access ########################### */
+/** \ingroup MMU_FunctionInterface
+ \defgroup MMU_Functions MMU Functions Interface
+ @{
+ */
+
+/* Attributes enumerations */
+
+/* Region size attributes */
+typedef enum
+{
+ SECTION,
+ PAGE_4k,
+ PAGE_64k,
+} mmu_region_size_Type;
+
+/* Region type attributes */
+typedef enum
+{
+ NORMAL,
+ DEVICE,
+ SHARED_DEVICE,
+ NON_SHARED_DEVICE,
+ STRONGLY_ORDERED
+} mmu_memory_Type;
+
+/* Region cacheability attributes */
+typedef enum
+{
+ NON_CACHEABLE,
+ WB_WA,
+ WT,
+ WB_NO_WA,
+} mmu_cacheability_Type;
+
+/* Region parity check attributes */
+typedef enum
+{
+ ECC_DISABLED,
+ ECC_ENABLED,
+} mmu_ecc_check_Type;
+
+/* Region execution attributes */
+typedef enum
+{
+ EXECUTE,
+ NON_EXECUTE,
+} mmu_execute_Type;
+
+/* Region global attributes */
+typedef enum
+{
+ GLOBAL,
+ NON_GLOBAL,
+} mmu_global_Type;
+
+/* Region shareability attributes */
+typedef enum
+{
+ NON_SHARED,
+ SHARED,
+} mmu_shared_Type;
+
+/* Region security attributes */
+typedef enum
+{
+ SECURE,
+ NON_SECURE,
+} mmu_secure_Type;
+
+/* Region access attributes */
+typedef enum
+{
+ NO_ACCESS,
+ RW,
+ READ,
+} mmu_access_Type;
+
+/* Memory Region definition */
+typedef struct RegionStruct {
+ mmu_region_size_Type rg_t;
+ mmu_memory_Type mem_t;
+ uint8_t domain;
+ mmu_cacheability_Type inner_norm_t;
+ mmu_cacheability_Type outer_norm_t;
+ mmu_ecc_check_Type e_t;
+ mmu_execute_Type xn_t;
+ mmu_global_Type g_t;
+ mmu_secure_Type sec_t;
+ mmu_access_Type priv_t;
+ mmu_access_Type user_t;
+ mmu_shared_Type sh_t;
+
+} mmu_region_attributes_Type;
+
+/** \brief Set section execution-never attribute
+
+ The function sets section execution-never attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] xn Section execution-never attribute : EXECUTE , NON_EXECUTE.
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_section(uint32_t *descriptor_l1, mmu_execute_Type xn)
+{
+ *descriptor_l1 &= SECTION_XN_MASK;
+ *descriptor_l1 |= ((xn & 0x1) << SECTION_XN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section domain
+
+ The function sets section domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Section domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_section(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= SECTION_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xF) << SECTION_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section parity check
+
+ The function sets section parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_section(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set section access privileges
+
+ The function sets section access privileges
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_section(uint32_t *descriptor_l1, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x6; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l1 &= SECTION_AP_MASK;
+ *descriptor_l1 |= (ap & 0x3) << SECTION_AP_SHIFT;
+ *descriptor_l1 |= ((ap & 0x4)>>2) << SECTION_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set section shareability
+
+ The function sets section shareability
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_section(uint32_t *descriptor_l1, mmu_shared_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_S_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Global attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] g_bit Section attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_section(uint32_t *descriptor_l1, mmu_global_Type g_bit)
+{
+ *descriptor_l1 &= SECTION_NG_MASK;
+ *descriptor_l1 |= ((g_bit & 0x1) << SECTION_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Security attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_section(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_NS_SHIFT);
+ return 0;
+}
+
+/* Page 4k or 64k */
+/** \brief Set 4k/64k page execution-never attribute
+
+ The function sets 4k/64k page execution-never attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] xn Page execution-never attribute : EXECUTE , NON_EXECUTE.
+ \param [in] page Page size: PAGE_4k, PAGE_64k,
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_page(uint32_t *descriptor_l2, mmu_execute_Type xn, mmu_region_size_Type page)
+{
+ if (page == PAGE_4k)
+ {
+ *descriptor_l2 &= PAGE_XN_4K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_4K_SHIFT);
+ }
+ else
+ {
+ *descriptor_l2 &= PAGE_XN_64K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_64K_SHIFT);
+ }
+ return 0;
+}
+
+/** \brief Set 4k/64k page domain
+
+ The function sets 4k/64k page domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Page domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_page(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= PAGE_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xf) << PAGE_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page parity check
+
+ The function sets 4k/64k page parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_page(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page access privileges
+
+ The function sets 4k/64k page access privileges
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_page(uint32_t *descriptor_l2, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x6; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l2 &= PAGE_AP_MASK;
+ *descriptor_l2 |= (ap & 0x3) << PAGE_AP_SHIFT;
+ *descriptor_l2 |= ((ap & 0x4)>>2) << PAGE_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page shareability
+
+ The function sets 4k/64k page shareability
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] s_bit 4k/64k page shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_page(uint32_t *descriptor_l2, mmu_shared_Type s_bit)
+{
+ *descriptor_l2 &= PAGE_S_MASK;
+ *descriptor_l2 |= ((s_bit & 0x1) << PAGE_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Global attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] g_bit 4k/64k page attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_page(uint32_t *descriptor_l2, mmu_global_Type g_bit)
+{
+ *descriptor_l2 &= PAGE_NG_MASK;
+ *descriptor_l2 |= ((g_bit & 0x1) << PAGE_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Security attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit 4k/64k page Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_page(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= PAGE_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << PAGE_NS_SHIFT);
+ return 0;
+}
+
+
+/** \brief Set Section memory attributes
+
+ The function sets section memory attributes
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] mem Section memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_section(uint32_t *descriptor_l1, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner)
+{
+ *descriptor_l1 &= SECTION_TEXCB_MASK;
+
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l1 |= 1 << SECTION_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT) | (1 << SECTION_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT) | (1 << SECTION_TEX0_SHIFT);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page memory attributes
+
+ The function sets 4k/64k page memory attributes
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] mem 4k/64k page memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_page(uint32_t *descriptor_l2, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner, mmu_region_size_Type page)
+{
+ *descriptor_l2 &= PAGE_4K_TEXCB_MASK;
+
+ if (page == PAGE_64k)
+ {
+ //same as section
+ __memory_section(descriptor_l2, mem, outer, inner);
+ }
+ else
+ {
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l2 |= 1 << PAGE_4K_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT) | (1 << PAGE_4K_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT) | (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Create a L1 section descriptor
+
+ The function creates a section descriptor.
+
+ Assumptions:
+ - 16MB super sections not suported
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg Section attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_section_descriptor(uint32_t *descriptor, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+
+ __memory_section(descriptor, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t);
+ __xn_section(descriptor,reg.xn_t);
+ __domain_section(descriptor, reg.domain);
+ __p_section(descriptor, reg.e_t);
+ __ap_section(descriptor, reg.priv_t, reg.user_t, 1);
+ __shared_section(descriptor,reg.sh_t);
+ __global_section(descriptor,reg.g_t);
+ __secure_section(descriptor,reg.sec_t);
+ *descriptor &= SECTION_MASK;
+ *descriptor |= SECTION_DESCRIPTOR;
+
+ return 0;
+
+}
+
+
+/** \brief Create a L1 and L2 4k/64k page descriptor
+
+ The function creates a 4k/64k page descriptor.
+ Assumptions:
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg 4k/64k page attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_page_descriptor(uint32_t *descriptor, uint32_t *descriptor2, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+ *descriptor2 = 0;
+
+ switch (reg.rg_t)
+ {
+ case PAGE_4k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_4k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_4k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_4K_MASK;
+ *descriptor2 |= PAGE_L2_4K_DESC;
+ break;
+
+ case PAGE_64k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_64k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_64k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_64K_MASK;
+ *descriptor2 |= PAGE_L2_64K_DESC;
+ break;
+
+ case SECTION:
+ //error
+ break;
+
+ }
+
+ return 0;
+
+}
+
+/** \brief Create a 1MB Section
+
+ \param [in] ttb Translation table base address
+ \param [in] base_address Section base address
+ \param [in] count Number of sections to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTSection(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1)
+{
+ uint32_t offset;
+ uint32_t entry;
+ uint32_t i;
+
+ offset = base_address >> 20;
+ entry = (base_address & 0xFFF00000) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb = ttb + offset;
+
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb++ = entry;
+ entry += OFFSET_1M;
+ }
+}
+
+/** \brief Create a 4k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 4k base address
+ \param [in] count Number of 4k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_4k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFFF000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_4K;
+ }
+}
+
+/** \brief Create a 64k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 64k base address
+ \param [in] count Number of 64k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_64k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i,j;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFF0000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //create 16 entries
+ for (j = 0; j < 16; j++)
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_64K;
+ }
+}
+
+/*@} end of MMU_Functions */
+#endif
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/core_cm0.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,682 @@
+/**************************************************************************//**
+ * @file core_cm0.h
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M0
+ @{
+ */
+
+/* CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/core_cm0plus.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,793 @@
+/**************************************************************************//**
+ * @file core_cm0plus.h
+ * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0PLUS_H_GENERIC
+#define __CORE_CM0PLUS_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex-M0+
+ @{
+ */
+
+/* CMSIS CM0P definitions */
+#define __CM0PLUS_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0PLUS_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16) | \
+ __CM0PLUS_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0PLUS_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0PLUS_H_DEPENDANT
+#define __CORE_CM0PLUS_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0PLUS_REV
+ #define __CM0PLUS_REV 0x0000
+ #warning "__CM0PLUS_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __VTOR_PRESENT
+ #define __VTOR_PRESENT 0
+ #warning "__VTOR_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex-M0+ */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+#if (__VTOR_PRESENT == 1)
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+#else
+ uint32_t RESERVED0;
+#endif
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if (__VTOR_PRESENT == 1)
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 8 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 8 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0+ Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0PLUS_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/core_cm3.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1627 @@
+/**************************************************************************//**
+ * @file core_cm3.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM3_H_GENERIC
+#define __CORE_CM3_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M3
+ @{
+ */
+
+/* CMSIS CM3 definitions */
+#define __CM3_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | \
+ __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x03) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI__VFP_SUPPORT____
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM3_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM3_H_DEPENDANT
+#define __CORE_CM3_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM3_REV
+ #define __CM3_REV 0x0200
+ #warning "__CM3_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M3 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#if (__CM3_REV < 0x0201) /* core r2p1 */
+#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#else
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+#else
+ uint32_t RESERVED1[1];
+#endif
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM3_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/core_cm4.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1772 @@
+/**************************************************************************//**
+ * @file core_cm4.h
+ * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_H_GENERIC
+#define __CORE_CM4_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M4
+ @{
+ */
+
+/* CMSIS CM4 definitions */
+#define __CM4_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM4_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16) | \
+ __CM4_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x04) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+#include <core_cm4_simd.h> /* Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CM4_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM4_H_DEPENDANT
+#define __CORE_CM4_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM4_REV
+ #define __CM4_REV 0x0000
+ #warning "__CM4_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 0
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M4 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ - Core FPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISOOFP_Pos 9 /*!< ACTLR: DISOOFP Position */
+#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */
+
+#define SCnSCB_ACTLR_DISFPCA_Pos 8 /*!< ACTLR: DISFPCA Position */
+#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_FPU Floating Point Unit (FPU)
+ \brief Type definitions for the Floating Point Unit (FPU)
+ @{
+ */
+
+/** \brief Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __IO uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
+ __IO uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
+ __IO uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
+ __I uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
+ __I uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register */
+#define FPU_FPCCR_ASPEN_Pos 31 /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos 30 /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos 8 /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos 6 /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos 5 /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos 4 /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos 3 /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos 1 /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos 0 /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk (1UL << FPU_FPCCR_LSPACT_Pos) /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register */
+#define FPU_FPCAR_ADDRESS_Pos 3 /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register */
+#define FPU_FPDSCR_AHP_Pos 26 /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos 25 /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos 24 /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos 22 /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 */
+#define FPU_MVFR0_FP_rounding_modes_Pos 28 /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos 24 /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos 20 /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos 16 /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos 12 /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos 8 /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos 4 /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos 0 /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL << FPU_MVFR0_A_SIMD_registers_Pos) /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 */
+#define FPU_MVFR1_FP_fused_MAC_Pos 28 /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos 24 /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos 4 /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos 0 /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk (0xFUL << FPU_MVFR1_FtZ_mode_Pos) /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+#if (__FPU_PRESENT == 1)
+ #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
+ #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+/* NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); enable interrupt */
+ NVIC->ISER[(uint32_t)((int32_t)IRQn) >> 5] = (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM4_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/core_cm4_simd.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,673 @@
+/**************************************************************************//**
+ * @file core_cm4_simd.h
+ * @brief CMSIS Cortex-M4 SIMD Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_SIMD_H
+#define __CORE_CM4_SIMD_H
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ ******************************************************************************/
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#define __SADD8 __sadd8
+#define __QADD8 __qadd8
+#define __SHADD8 __shadd8
+#define __UADD8 __uadd8
+#define __UQADD8 __uqadd8
+#define __UHADD8 __uhadd8
+#define __SSUB8 __ssub8
+#define __QSUB8 __qsub8
+#define __SHSUB8 __shsub8
+#define __USUB8 __usub8
+#define __UQSUB8 __uqsub8
+#define __UHSUB8 __uhsub8
+#define __SADD16 __sadd16
+#define __QADD16 __qadd16
+#define __SHADD16 __shadd16
+#define __UADD16 __uadd16
+#define __UQADD16 __uqadd16
+#define __UHADD16 __uhadd16
+#define __SSUB16 __ssub16
+#define __QSUB16 __qsub16
+#define __SHSUB16 __shsub16
+#define __USUB16 __usub16
+#define __UQSUB16 __uqsub16
+#define __UHSUB16 __uhsub16
+#define __SASX __sasx
+#define __QASX __qasx
+#define __SHASX __shasx
+#define __UASX __uasx
+#define __UQASX __uqasx
+#define __UHASX __uhasx
+#define __SSAX __ssax
+#define __QSAX __qsax
+#define __SHSAX __shsax
+#define __USAX __usax
+#define __UQSAX __uqsax
+#define __UHSAX __uhsax
+#define __USAD8 __usad8
+#define __USADA8 __usada8
+#define __SSAT16 __ssat16
+#define __USAT16 __usat16
+#define __UXTB16 __uxtb16
+#define __UXTAB16 __uxtab16
+#define __SXTB16 __sxtb16
+#define __SXTAB16 __sxtab16
+#define __SMUAD __smuad
+#define __SMUADX __smuadx
+#define __SMLAD __smlad
+#define __SMLADX __smladx
+#define __SMLALD __smlald
+#define __SMLALDX __smlaldx
+#define __SMUSD __smusd
+#define __SMUSDX __smusdx
+#define __SMLSD __smlsd
+#define __SMLSDX __smlsdx
+#define __SMLSLD __smlsld
+#define __SMLSLDX __smlsldx
+#define __SEL __sel
+#define __QADD __qadd
+#define __QSUB __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
+ ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
+
+#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
+ ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
+
+#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+ ((int64_t)(ARG3) << 32) ) >> 32))
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_iar.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_ccs.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLALD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLALDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLSLD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLSLDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ if (ARG3 == 0) \
+ __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
+ else \
+ __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+/* not yet supported */
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CORE_CM4_SIMD_H */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/core_cmFunc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,636 @@
+/**************************************************************************//**
+ * @file core_cmFunc.h
+ * @brief CMSIS Cortex-M Core Function Access Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ register uint32_t __regIPSR __ASM("ipsr");
+ return(__regIPSR);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ register uint32_t __regXPSR __ASM("xpsr");
+ return(__regXPSR);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ return(__regProcessStackPointer);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ __regProcessStackPointer = topOfProcStack;
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ return(__regMainStackPointer);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ __regMainStackPointer = topOfMainStack;
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0xff);
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/** \brief Enable IRQ Interrupts
+
+ This function enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ uint32_t result;
+
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all instrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CMFUNC_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/core_cmInstr.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,688 @@
+/**************************************************************************//**
+ * @file core_cmInstr.h
+ * @brief CMSIS Cortex-M Core Instruction Access Header File
+ * @version V3.20
+ * @date 05. March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __nop
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+#define __WFI __wfi
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __wfe
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __sev
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+#define __ISB() __isb(0xF)
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() __dsb(0xF)
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() __dmb(0xF)
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __rev
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+ rev16 r0, r0
+ bx lr
+}
+#endif
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+ revsh r0, r0
+ bx lr
+}
+#endif
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+#define __ROR __ror
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __breakpoint(value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __RBIT __rbit
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXB(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXH(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXW(value, ptr) __strex(value, ptr)
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+#define __CLREX __clrex
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT __ssat
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __usat
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __clz
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constrant "l"
+ * Otherwise, use general registers, specified by constrant "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __NOP(void)
+{
+ __ASM volatile ("nop");
+}
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFI(void)
+{
+ __ASM volatile ("wfi");
+}
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFE(void)
+{
+ __ASM volatile ("wfe");
+}
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __SEV(void)
+{
+ __ASM volatile ("sev");
+}
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ISB(void)
+{
+ __ASM volatile ("isb");
+}
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DSB(void)
+{
+ __ASM volatile ("dsb");
+}
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void)
+{
+ __ASM volatile ("dmb");
+}
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+ return __builtin_bswap32(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ return (short)__builtin_bswap16(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32 - op2));
+}
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void)
+{
+ __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/hal_tick.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,60 @@
+/**
+ ******************************************************************************
+ * @file hal_tick.h
+ * @author MCD Application Team
+ * @brief Initialization of HAL tick
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#ifndef __HAL_TICK_H
+#define __HAL_TICK_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "stm32f4xx.h"
+#include "cmsis_nvic.h"
+
+#define TIM_MST TIM5
+#define TIM_MST_IRQ TIM5_IRQn
+#define TIM_MST_RCC __TIM5_CLK_ENABLE()
+
+#define TIM_MST_RESET_ON __TIM5_FORCE_RESET()
+#define TIM_MST_RESET_OFF __TIM5_RELEASE_RESET()
+
+#define HAL_TICK_DELAY (1000) // 1 ms
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __HAL_TICK_H
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f411xe.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,4778 @@
+/**
+ ******************************************************************************
+ * @file stm32f411xe.h
+ * @author MCD Application Team
+ * @version V2.1.0
+ * @date 19-June-2014
+ * @brief CMSIS STM32F411xExx Device Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripheralâs registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f411xe
+ * @{
+ */
+
+#ifndef __STM32F411xE_H
+#define __STM32F411xE_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M4 Processor and Core Peripherals
+ */
+#define __CM4_REV 0x0001 /*!< Core revision r0p1 */
+#define __MPU_PRESENT 1 /*!< STM32F4XX provides an MPU */
+#define __NVIC_PRIO_BITS 4 /*!< STM32F4XX uses 4 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+#define __FPU_PRESENT 1 /*!< FPU present */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F4XX Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+typedef enum
+{
+/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M4 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M4 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M4 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M4 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M4 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M4 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M4 System Tick Interrupt */
+/****** STM32 specific Interrupt Numbers **********************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */
+ TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */
+ RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */
+ FLASH_IRQn = 4, /*!< FLASH global Interrupt */
+ RCC_IRQn = 5, /*!< RCC global Interrupt */
+ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */
+ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */
+ EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */
+ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */
+ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */
+ DMA1_Stream0_IRQn = 11, /*!< DMA1 Stream 0 global Interrupt */
+ DMA1_Stream1_IRQn = 12, /*!< DMA1 Stream 1 global Interrupt */
+ DMA1_Stream2_IRQn = 13, /*!< DMA1 Stream 2 global Interrupt */
+ DMA1_Stream3_IRQn = 14, /*!< DMA1 Stream 3 global Interrupt */
+ DMA1_Stream4_IRQn = 15, /*!< DMA1 Stream 4 global Interrupt */
+ DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */
+ DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */
+ ADC_IRQn = 18, /*!< ADC1, ADC2 and ADC3 global Interrupts */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */
+ TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */
+ TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */
+ OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */
+ DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */
+ SDIO_IRQn = 49, /*!< SDIO global Interrupt */
+ TIM5_IRQn = 50, /*!< TIM5 global Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */
+ DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */
+ DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */
+ DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */
+ DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */
+ OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */
+ DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */
+ DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */
+ DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */
+ USART6_IRQn = 71, /*!< USART6 global interrupt */
+ I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */
+ I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */
+ FPU_IRQn = 81, /*!< FPU global interrupt */
+ SPI4_IRQn = 84, /*!< SPI4 global Interrupt */
+ SPI5_IRQn = 85 /*!< SPI5 global Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */
+#include "system_stm32f4xx.h"
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */
+ __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */
+ __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */
+ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */
+ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */
+ __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x14 */
+ __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x18 */
+ __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x1C */
+ __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x20 */
+ __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x24 */
+ __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x28 */
+ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x2C */
+ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x30 */
+ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x34 */
+ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38*/
+ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x3C */
+ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x40 */
+ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x44 */
+ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x48 */
+ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x4C */
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1 base address + 0x300 */
+ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */
+ __IO uint32_t CDR; /*!< ADC common regular data register for dual
+ AND triple modes, Address offset: ADC1 base address + 0x308 */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+} CRC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DMA stream x configuration register */
+ __IO uint32_t NDTR; /*!< DMA stream x number of data register */
+ __IO uint32_t PAR; /*!< DMA stream x peripheral address register */
+ __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */
+ __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */
+ __IO uint32_t FCR; /*!< DMA stream x FIFO control register */
+} DMA_Stream_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */
+ __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */
+ __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */
+ __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */
+} DMA_TypeDef;
+
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */
+} EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+
+typedef struct
+{
+ __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */
+ __IO uint32_t OPTCR; /*!< FLASH option control register , Address offset: 0x14 */
+ __IO uint32_t OPTCR1; /*!< FLASH option control register 1, Address offset: 0x18 */
+} FLASH_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint16_t BSRRL; /*!< GPIO port bit set/reset low register, Address offset: 0x18 */
+ __IO uint16_t BSRRH; /*!< GPIO port bit set/reset high register, Address offset: 0x1A */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */
+} GPIO_TypeDef;
+
+/**
+ * @brief System configuration controller
+ */
+
+typedef struct
+{
+ __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */
+ __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */
+ uint32_t RESERVED[2]; /*!< Reserved, 0x18-0x1C */
+ __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */
+} SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address register 1, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address register 2, Address offset: 0x0C */
+ __IO uint32_t DR; /*!< I2C Data register, Address offset: 0x10 */
+ __IO uint32_t SR1; /*!< I2C Status register 1, Address offset: 0x14 */
+ __IO uint32_t SR2; /*!< I2C Status register 2, Address offset: 0x18 */
+ __IO uint32_t CCR; /*!< I2C Clock control register, Address offset: 0x1C */
+ __IO uint32_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */
+ __IO uint32_t FLTR; /*!< I2C FLTR register, Address offset: 0x24 */
+} I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+} IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+} PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t PLLCFGR; /*!< RCC PLL configuration register, Address offset: 0x04 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x0C */
+ __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x14 */
+ __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x18 */
+ uint32_t RESERVED0; /*!< Reserved, 0x1C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x20 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x24 */
+ uint32_t RESERVED1[2]; /*!< Reserved, 0x28-0x2C */
+ __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0x30 */
+ __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0x34 */
+ __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0x38 */
+ uint32_t RESERVED2; /*!< Reserved, 0x3C */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x40 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x44 */
+ uint32_t RESERVED3[2]; /*!< Reserved, 0x48-0x4C */
+ __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */
+ __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */
+ __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */
+ uint32_t RESERVED4; /*!< Reserved, 0x5C */
+ __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */
+ __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */
+ uint32_t RESERVED5[2]; /*!< Reserved, 0x68-0x6C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x70 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */
+ uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */
+ __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */
+ __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */
+
+} RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ __IO uint32_t CALIBR; /*!< RTC calibration register, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR;/*!< RTC alarm A sub second register, Address offset: 0x44 */
+ __IO uint32_t ALRMBSSR;/*!< RTC alarm B sub second register, Address offset: 0x48 */
+ uint32_t RESERVED7; /*!< Reserved, 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 1, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+ __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */
+ __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */
+ __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */
+ __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */
+ __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */
+ __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */
+ __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */
+ __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */
+ __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */
+ __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */
+ __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */
+ __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */
+ __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */
+ __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */
+ __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */
+} RTC_TypeDef;
+
+
+/**
+ * @brief SD host Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t POWER; /*!< SDIO power control register, Address offset: 0x00 */
+ __IO uint32_t CLKCR; /*!< SDI clock control register, Address offset: 0x04 */
+ __IO uint32_t ARG; /*!< SDIO argument register, Address offset: 0x08 */
+ __IO uint32_t CMD; /*!< SDIO command register, Address offset: 0x0C */
+ __I uint32_t RESPCMD; /*!< SDIO command response register, Address offset: 0x10 */
+ __I uint32_t RESP1; /*!< SDIO response 1 register, Address offset: 0x14 */
+ __I uint32_t RESP2; /*!< SDIO response 2 register, Address offset: 0x18 */
+ __I uint32_t RESP3; /*!< SDIO response 3 register, Address offset: 0x1C */
+ __I uint32_t RESP4; /*!< SDIO response 4 register, Address offset: 0x20 */
+ __IO uint32_t DTIMER; /*!< SDIO data timer register, Address offset: 0x24 */
+ __IO uint32_t DLEN; /*!< SDIO data length register, Address offset: 0x28 */
+ __IO uint32_t DCTRL; /*!< SDIO data control register, Address offset: 0x2C */
+ __I uint32_t DCOUNT; /*!< SDIO data counter register, Address offset: 0x30 */
+ __I uint32_t STA; /*!< SDIO status register, Address offset: 0x34 */
+ __IO uint32_t ICR; /*!< SDIO interrupt clear register, Address offset: 0x38 */
+ __IO uint32_t MASK; /*!< SDIO mask register, Address offset: 0x3C */
+ uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */
+ __I uint32_t FIFOCNT; /*!< SDIO FIFO counter register, Address offset: 0x48 */
+ uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */
+ __IO uint32_t FIFO; /*!< SDIO data FIFO register, Address offset: 0x80 */
+} SDIO_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+} SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+} TIM_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */
+} USART_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+} WWDG_TypeDef;
+
+
+/**
+ * @brief __USB_OTG_Core_register
+ */
+typedef struct
+{
+ __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register Address offset : 0x00 */
+ __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register Address offset : 0x04 */
+ __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register Address offset : 0x08 */
+ __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register Address offset : 0x0C */
+ __IO uint32_t GRSTCTL; /*!< Core Reset Register Address offset : 0x10 */
+ __IO uint32_t GINTSTS; /*!< Core Interrupt Register Address offset : 0x14 */
+ __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register Address offset : 0x18 */
+ __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register Address offset : 0x1C */
+ __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register Address offset : 0x20 */
+ __IO uint32_t GRXFSIZ; /* Receive FIFO Size Register Address offset : 0x24 */
+ __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register Address offset : 0x28 */
+ __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg Address offset : 0x2C */
+ uint32_t Reserved30[2]; /* Reserved Address offset : 0x30 */
+ __IO uint32_t GCCFG; /*!< General Purpose IO Register Address offset : 0x38 */
+ __IO uint32_t CID; /*!< User ID Register Address offset : 0x3C */
+ uint32_t Reserved40[48]; /*!< Reserved Address offset : 0x40-0xFF */
+ __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg Address offset : 0x100 */
+ __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO */
+}
+USB_OTG_GlobalTypeDef;
+
+
+
+/**
+ * @brief __device_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DCFG; /*!< dev Configuration Register Address offset : 0x800 */
+ __IO uint32_t DCTL; /*!< dev Control Register Address offset : 0x804 */
+ __IO uint32_t DSTS; /*!< dev Status Register (RO) Address offset : 0x808 */
+ uint32_t Reserved0C; /*!< Reserved Address offset : 0x80C */
+ __IO uint32_t DIEPMSK; /* !< dev IN Endpoint Mask Address offset : 0x810 */
+ __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask Address offset : 0x814 */
+ __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg Address offset : 0x818 */
+ __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask Address offset : 0x81C */
+ uint32_t Reserved20; /*!< Reserved Address offset : 0x820 */
+ uint32_t Reserved9; /*!< Reserved Address offset : 0x824 */
+ __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register Address offset : 0x828 */
+ __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register Address offset : 0x82C */
+ __IO uint32_t DTHRCTL; /*!< dev thr Address offset : 0x830 */
+ __IO uint32_t DIEPEMPMSK; /*!< dev empty msk Address offset : 0x834 */
+ __IO uint32_t DEACHINT; /*!< dedicated EP interrupt Address offset : 0x838 */
+ __IO uint32_t DEACHMSK; /*!< dedicated EP msk Address offset : 0x83C */
+ uint32_t Reserved40; /*!< dedicated EP mask Address offset : 0x840 */
+ __IO uint32_t DINEP1MSK; /*!< dedicated EP mask Address offset : 0x844 */
+ uint32_t Reserved44[15]; /*!< Reserved Address offset : 0x844-0x87C */
+ __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk Address offset : 0x884 */
+}
+USB_OTG_DeviceTypeDef;
+
+
+/**
+ * @brief __IN_Endpoint-Specific_Register
+ */
+typedef struct
+{
+ __IO uint32_t DIEPCTL; /* dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h */
+ uint32_t Reserved04; /* Reserved 900h + (ep_num * 20h) + 04h */
+ __IO uint32_t DIEPINT; /* dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h */
+ uint32_t Reserved0C; /* Reserved 900h + (ep_num * 20h) + 0Ch */
+ __IO uint32_t DIEPTSIZ; /* IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h */
+ __IO uint32_t DIEPDMA; /* IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h */
+ __IO uint32_t DTXFSTS; /*IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h */
+ uint32_t Reserved18; /* Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch */
+}
+USB_OTG_INEndpointTypeDef;
+
+
+/**
+ * @brief __OUT_Endpoint-Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t DOEPCTL; /* dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h*/
+ uint32_t Reserved04; /* Reserved B00h + (ep_num * 20h) + 04h*/
+ __IO uint32_t DOEPINT; /* dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h*/
+ uint32_t Reserved0C; /* Reserved B00h + (ep_num * 20h) + 0Ch*/
+ __IO uint32_t DOEPTSIZ; /* dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h*/
+ __IO uint32_t DOEPDMA; /* dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h*/
+ uint32_t Reserved18[2]; /* Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch*/
+}
+USB_OTG_OUTEndpointTypeDef;
+
+
+/**
+ * @brief __Host_Mode_Register_Structures
+ */
+typedef struct
+{
+ __IO uint32_t HCFG; /* Host Configuration Register 400h*/
+ __IO uint32_t HFIR; /* Host Frame Interval Register 404h*/
+ __IO uint32_t HFNUM; /* Host Frame Nbr/Frame Remaining 408h*/
+ uint32_t Reserved40C; /* Reserved 40Ch*/
+ __IO uint32_t HPTXSTS; /* Host Periodic Tx FIFO/ Queue Status 410h*/
+ __IO uint32_t HAINT; /* Host All Channels Interrupt Register 414h*/
+ __IO uint32_t HAINTMSK; /* Host All Channels Interrupt Mask 418h*/
+}
+USB_OTG_HostTypeDef;
+
+
+/**
+ * @brief __Host_Channel_Specific_Registers
+ */
+typedef struct
+{
+ __IO uint32_t HCCHAR;
+ __IO uint32_t HCSPLT;
+ __IO uint32_t HCINT;
+ __IO uint32_t HCINTMSK;
+ __IO uint32_t HCTSIZ;
+ __IO uint32_t HCDMA;
+ uint32_t Reserved[2];
+}
+USB_OTG_HostChannelTypeDef;
+
+
+/**
+ * @brief Peripheral_memory_map
+ */
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH(up to 1 MB) base address in the alias region */
+#define CCMDATARAM_BASE ((uint32_t)0x10000000) /*!< CCM(core coupled memory) data RAM(64 KB) base address in the alias region */
+#define SRAM1_BASE ((uint32_t)0x20000000) /*!< SRAM1(112 KB) base address in the alias region */
+#define SRAM2_BASE ((uint32_t)0x2001C000) /*!< SRAM2(16 KB) base address in the alias region */
+#define SRAM3_BASE ((uint32_t)0x20020000) /*!< SRAM3(64 KB) base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+#define BKPSRAM_BASE ((uint32_t)0x40024000) /*!< Backup SRAM(4 KB) base address in the alias region */
+#define CCMDATARAM_BB_BASE ((uint32_t)0x12000000) /*!< CCM(core coupled memory) data RAM(64 KB) base address in the bit-band region */
+#define SRAM1_BB_BASE ((uint32_t)0x22000000) /*!< SRAM1(112 KB) base address in the bit-band region */
+#define SRAM2_BB_BASE ((uint32_t)0x2201C000) /*!< SRAM2(16 KB) base address in the bit-band region */
+#define SRAM3_BB_BASE ((uint32_t)0x22020000) /*!< SRAM3(64 KB) base address in the bit-band region */
+#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */
+#define BKPSRAM_BB_BASE ((uint32_t)0x42024000) /*!< Backup SRAM(4 KB) base address in the bit-band region */
+#define FLASH_END ((uint32_t)0x0807FFFF) /*!< FLASH end address */
+
+/* Legacy defines */
+#define SRAM_BASE SRAM1_BASE
+#define SRAM_BB_BASE SRAM1_BB_BASE
+
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE PERIPH_BASE
+#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000)
+#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x10000000)
+
+/*!< APB1 peripherals */
+#define TIM2_BASE (APB1PERIPH_BASE + 0x0000)
+#define TIM3_BASE (APB1PERIPH_BASE + 0x0400)
+#define TIM4_BASE (APB1PERIPH_BASE + 0x0800)
+#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00)
+#define RTC_BASE (APB1PERIPH_BASE + 0x2800)
+#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00)
+#define IWDG_BASE (APB1PERIPH_BASE + 0x3000)
+#define I2S2ext_BASE (APB1PERIPH_BASE + 0x3400)
+#define SPI2_BASE (APB1PERIPH_BASE + 0x3800)
+#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00)
+#define I2S3ext_BASE (APB1PERIPH_BASE + 0x4000)
+#define USART2_BASE (APB1PERIPH_BASE + 0x4400)
+#define I2C1_BASE (APB1PERIPH_BASE + 0x5400)
+#define I2C2_BASE (APB1PERIPH_BASE + 0x5800)
+#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00)
+#define PWR_BASE (APB1PERIPH_BASE + 0x7000)
+
+/*!< APB2 peripherals */
+#define TIM1_BASE (APB2PERIPH_BASE + 0x0000)
+#define USART1_BASE (APB2PERIPH_BASE + 0x1000)
+#define USART6_BASE (APB2PERIPH_BASE + 0x1400)
+#define ADC1_BASE (APB2PERIPH_BASE + 0x2000)
+#define ADC_BASE (APB2PERIPH_BASE + 0x2300)
+#define SDIO_BASE (APB2PERIPH_BASE + 0x2C00)
+#define SPI1_BASE (APB2PERIPH_BASE + 0x3000)
+#define SPI4_BASE (APB2PERIPH_BASE + 0x3400)
+#define SYSCFG_BASE (APB2PERIPH_BASE + 0x3800)
+#define EXTI_BASE (APB2PERIPH_BASE + 0x3C00)
+#define TIM9_BASE (APB2PERIPH_BASE + 0x4000)
+#define TIM10_BASE (APB2PERIPH_BASE + 0x4400)
+#define TIM11_BASE (APB2PERIPH_BASE + 0x4800)
+#define SPI5_BASE (APB2PERIPH_BASE + 0x5000)
+
+/*!< AHB1 peripherals */
+#define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000)
+#define GPIOB_BASE (AHB1PERIPH_BASE + 0x0400)
+#define GPIOC_BASE (AHB1PERIPH_BASE + 0x0800)
+#define GPIOD_BASE (AHB1PERIPH_BASE + 0x0C00)
+#define GPIOE_BASE (AHB1PERIPH_BASE + 0x1000)
+#define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00)
+#define CRC_BASE (AHB1PERIPH_BASE + 0x3000)
+#define RCC_BASE (AHB1PERIPH_BASE + 0x3800)
+#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00)
+#define DMA1_BASE (AHB1PERIPH_BASE + 0x6000)
+#define DMA1_Stream0_BASE (DMA1_BASE + 0x010)
+#define DMA1_Stream1_BASE (DMA1_BASE + 0x028)
+#define DMA1_Stream2_BASE (DMA1_BASE + 0x040)
+#define DMA1_Stream3_BASE (DMA1_BASE + 0x058)
+#define DMA1_Stream4_BASE (DMA1_BASE + 0x070)
+#define DMA1_Stream5_BASE (DMA1_BASE + 0x088)
+#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0)
+#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8)
+#define DMA2_BASE (AHB1PERIPH_BASE + 0x6400)
+#define DMA2_Stream0_BASE (DMA2_BASE + 0x010)
+#define DMA2_Stream1_BASE (DMA2_BASE + 0x028)
+#define DMA2_Stream2_BASE (DMA2_BASE + 0x040)
+#define DMA2_Stream3_BASE (DMA2_BASE + 0x058)
+#define DMA2_Stream4_BASE (DMA2_BASE + 0x070)
+#define DMA2_Stream5_BASE (DMA2_BASE + 0x088)
+#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0)
+#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8)
+
+/* Debug MCU registers base address */
+#define DBGMCU_BASE ((uint32_t )0xE0042000)
+
+/*!< USB registers base address */
+#define USB_OTG_FS_PERIPH_BASE ((uint32_t )0x50000000)
+
+#define USB_OTG_GLOBAL_BASE ((uint32_t )0x000)
+#define USB_OTG_DEVICE_BASE ((uint32_t )0x800)
+#define USB_OTG_IN_ENDPOINT_BASE ((uint32_t )0x900)
+#define USB_OTG_OUT_ENDPOINT_BASE ((uint32_t )0xB00)
+#define USB_OTG_EP_REG_SIZE ((uint32_t )0x20)
+#define USB_OTG_HOST_BASE ((uint32_t )0x400)
+#define USB_OTG_HOST_PORT_BASE ((uint32_t )0x440)
+#define USB_OTG_HOST_CHANNEL_BASE ((uint32_t )0x500)
+#define USB_OTG_HOST_CHANNEL_SIZE ((uint32_t )0x20)
+#define USB_OTG_PCGCCTL_BASE ((uint32_t )0xE00)
+#define USB_OTG_FIFO_BASE ((uint32_t )0x1000)
+#define USB_OTG_FIFO_SIZE ((uint32_t )0x1000)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM4 ((TIM_TypeDef *) TIM4_BASE)
+#define TIM5 ((TIM_TypeDef *) TIM5_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define I2S2ext ((SPI_TypeDef *) I2S2ext_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define SPI3 ((SPI_TypeDef *) SPI3_BASE)
+#define I2S3ext ((SPI_TypeDef *) I2S3ext_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define I2C3 ((I2C_TypeDef *) I2C3_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define USART6 ((USART_TypeDef *) USART6_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define SDIO ((SDIO_TypeDef *) SDIO_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define SPI4 ((SPI_TypeDef *) SPI4_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define TIM9 ((TIM_TypeDef *) TIM9_BASE)
+#define TIM10 ((TIM_TypeDef *) TIM10_BASE)
+#define TIM11 ((TIM_TypeDef *) TIM11_BASE)
+#define SPI5 ((SPI_TypeDef *) SPI5_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE)
+#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE)
+#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE)
+#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE)
+#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE)
+#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE)
+#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE)
+#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE)
+#define DMA2 ((DMA_TypeDef *) DMA2_BASE)
+#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE)
+#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE)
+#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE)
+#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE)
+#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE)
+#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE)
+#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE)
+#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE)
+
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+
+#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers_Bits_Definition */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter */
+/* */
+/******************************************************************************/
+/******************** Bit definition for ADC_SR register ********************/
+#define ADC_SR_AWD ((uint32_t)0x00000001) /*!<Analog watchdog flag */
+#define ADC_SR_EOC ((uint32_t)0x00000002) /*!<End of conversion */
+#define ADC_SR_JEOC ((uint32_t)0x00000004) /*!<Injected channel end of conversion */
+#define ADC_SR_JSTRT ((uint32_t)0x00000008) /*!<Injected channel Start flag */
+#define ADC_SR_STRT ((uint32_t)0x00000010) /*!<Regular channel Start flag */
+#define ADC_SR_OVR ((uint32_t)0x00000020) /*!<Overrun flag */
+
+/******************* Bit definition for ADC_CR1 register ********************/
+#define ADC_CR1_AWDCH ((uint32_t)0x0000001F) /*!<AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CR1_AWDCH_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_CR1_AWDCH_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_CR1_AWDCH_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_CR1_AWDCH_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_CR1_AWDCH_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_CR1_EOCIE ((uint32_t)0x00000020) /*!<Interrupt enable for EOC */
+#define ADC_CR1_AWDIE ((uint32_t)0x00000040) /*!<AAnalog Watchdog interrupt enable */
+#define ADC_CR1_JEOCIE ((uint32_t)0x00000080) /*!<Interrupt enable for injected channels */
+#define ADC_CR1_SCAN ((uint32_t)0x00000100) /*!<Scan mode */
+#define ADC_CR1_AWDSGL ((uint32_t)0x00000200) /*!<Enable the watchdog on a single channel in scan mode */
+#define ADC_CR1_JAUTO ((uint32_t)0x00000400) /*!<Automatic injected group conversion */
+#define ADC_CR1_DISCEN ((uint32_t)0x00000800) /*!<Discontinuous mode on regular channels */
+#define ADC_CR1_JDISCEN ((uint32_t)0x00001000) /*!<Discontinuous mode on injected channels */
+#define ADC_CR1_DISCNUM ((uint32_t)0x0000E000) /*!<DISCNUM[2:0] bits (Discontinuous mode channel count) */
+#define ADC_CR1_DISCNUM_0 ((uint32_t)0x00002000) /*!<Bit 0 */
+#define ADC_CR1_DISCNUM_1 ((uint32_t)0x00004000) /*!<Bit 1 */
+#define ADC_CR1_DISCNUM_2 ((uint32_t)0x00008000) /*!<Bit 2 */
+#define ADC_CR1_JAWDEN ((uint32_t)0x00400000) /*!<Analog watchdog enable on injected channels */
+#define ADC_CR1_AWDEN ((uint32_t)0x00800000) /*!<Analog watchdog enable on regular channels */
+#define ADC_CR1_RES ((uint32_t)0x03000000) /*!<RES[2:0] bits (Resolution) */
+#define ADC_CR1_RES_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define ADC_CR1_RES_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define ADC_CR1_OVRIE ((uint32_t)0x04000000) /*!<overrun interrupt enable */
+
+/******************* Bit definition for ADC_CR2 register ********************/
+#define ADC_CR2_ADON ((uint32_t)0x00000001) /*!<A/D Converter ON / OFF */
+#define ADC_CR2_CONT ((uint32_t)0x00000002) /*!<Continuous Conversion */
+#define ADC_CR2_DMA ((uint32_t)0x00000100) /*!<Direct Memory access mode */
+#define ADC_CR2_DDS ((uint32_t)0x00000200) /*!<DMA disable selection (Single ADC) */
+#define ADC_CR2_EOCS ((uint32_t)0x00000400) /*!<End of conversion selection */
+#define ADC_CR2_ALIGN ((uint32_t)0x00000800) /*!<Data Alignment */
+#define ADC_CR2_JEXTSEL ((uint32_t)0x000F0000) /*!<JEXTSEL[3:0] bits (External event select for injected group) */
+#define ADC_CR2_JEXTSEL_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define ADC_CR2_JEXTSEL_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define ADC_CR2_JEXTSEL_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define ADC_CR2_JEXTSEL_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define ADC_CR2_JEXTEN ((uint32_t)0x00300000) /*!<JEXTEN[1:0] bits (External Trigger Conversion mode for injected channelsp) */
+#define ADC_CR2_JEXTEN_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_CR2_JEXTEN_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define ADC_CR2_JSWSTART ((uint32_t)0x00400000) /*!<Start Conversion of injected channels */
+#define ADC_CR2_EXTSEL ((uint32_t)0x0F000000) /*!<EXTSEL[3:0] bits (External Event Select for regular group) */
+#define ADC_CR2_EXTSEL_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define ADC_CR2_EXTSEL_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define ADC_CR2_EXTSEL_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define ADC_CR2_EXTSEL_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define ADC_CR2_EXTEN ((uint32_t)0x30000000) /*!<EXTEN[1:0] bits (External Trigger Conversion mode for regular channelsp) */
+#define ADC_CR2_EXTEN_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define ADC_CR2_EXTEN_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+#define ADC_CR2_SWSTART ((uint32_t)0x40000000) /*!<Start Conversion of regular channels */
+
+/****************** Bit definition for ADC_SMPR1 register *******************/
+#define ADC_SMPR1_SMP10 ((uint32_t)0x00000007) /*!<SMP10[2:0] bits (Channel 10 Sample time selection) */
+#define ADC_SMPR1_SMP10_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SMPR1_SMP10_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SMPR1_SMP10_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SMPR1_SMP11 ((uint32_t)0x00000038) /*!<SMP11[2:0] bits (Channel 11 Sample time selection) */
+#define ADC_SMPR1_SMP11_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define ADC_SMPR1_SMP11_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define ADC_SMPR1_SMP11_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define ADC_SMPR1_SMP12 ((uint32_t)0x000001C0) /*!<SMP12[2:0] bits (Channel 12 Sample time selection) */
+#define ADC_SMPR1_SMP12_0 ((uint32_t)0x00000040) /*!<Bit 0 */
+#define ADC_SMPR1_SMP12_1 ((uint32_t)0x00000080) /*!<Bit 1 */
+#define ADC_SMPR1_SMP12_2 ((uint32_t)0x00000100) /*!<Bit 2 */
+#define ADC_SMPR1_SMP13 ((uint32_t)0x00000E00) /*!<SMP13[2:0] bits (Channel 13 Sample time selection) */
+#define ADC_SMPR1_SMP13_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define ADC_SMPR1_SMP13_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+#define ADC_SMPR1_SMP13_2 ((uint32_t)0x00000800) /*!<Bit 2 */
+#define ADC_SMPR1_SMP14 ((uint32_t)0x00007000) /*!<SMP14[2:0] bits (Channel 14 Sample time selection) */
+#define ADC_SMPR1_SMP14_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP14_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP14_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define ADC_SMPR1_SMP15 ((uint32_t)0x00038000) /*!<SMP15[2:0] bits (Channel 15 Sample time selection) */
+#define ADC_SMPR1_SMP15_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP15_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP15_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SMPR1_SMP16 ((uint32_t)0x001C0000) /*!<SMP16[2:0] bits (Channel 16 Sample time selection) */
+#define ADC_SMPR1_SMP16_0 ((uint32_t)0x00040000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP16_1 ((uint32_t)0x00080000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP16_2 ((uint32_t)0x00100000) /*!<Bit 2 */
+#define ADC_SMPR1_SMP17 ((uint32_t)0x00E00000) /*!<SMP17[2:0] bits (Channel 17 Sample time selection) */
+#define ADC_SMPR1_SMP17_0 ((uint32_t)0x00200000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP17_1 ((uint32_t)0x00400000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP17_2 ((uint32_t)0x00800000) /*!<Bit 2 */
+#define ADC_SMPR1_SMP18 ((uint32_t)0x07000000) /*!<SMP18[2:0] bits (Channel 18 Sample time selection) */
+#define ADC_SMPR1_SMP18_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define ADC_SMPR1_SMP18_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define ADC_SMPR1_SMP18_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+
+/****************** Bit definition for ADC_SMPR2 register *******************/
+#define ADC_SMPR2_SMP0 ((uint32_t)0x00000007) /*!<SMP0[2:0] bits (Channel 0 Sample time selection) */
+#define ADC_SMPR2_SMP0_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SMPR2_SMP0_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SMPR2_SMP0_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SMPR2_SMP1 ((uint32_t)0x00000038) /*!<SMP1[2:0] bits (Channel 1 Sample time selection) */
+#define ADC_SMPR2_SMP1_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define ADC_SMPR2_SMP1_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define ADC_SMPR2_SMP1_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define ADC_SMPR2_SMP2 ((uint32_t)0x000001C0) /*!<SMP2[2:0] bits (Channel 2 Sample time selection) */
+#define ADC_SMPR2_SMP2_0 ((uint32_t)0x00000040) /*!<Bit 0 */
+#define ADC_SMPR2_SMP2_1 ((uint32_t)0x00000080) /*!<Bit 1 */
+#define ADC_SMPR2_SMP2_2 ((uint32_t)0x00000100) /*!<Bit 2 */
+#define ADC_SMPR2_SMP3 ((uint32_t)0x00000E00) /*!<SMP3[2:0] bits (Channel 3 Sample time selection) */
+#define ADC_SMPR2_SMP3_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define ADC_SMPR2_SMP3_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+#define ADC_SMPR2_SMP3_2 ((uint32_t)0x00000800) /*!<Bit 2 */
+#define ADC_SMPR2_SMP4 ((uint32_t)0x00007000) /*!<SMP4[2:0] bits (Channel 4 Sample time selection) */
+#define ADC_SMPR2_SMP4_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP4_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP4_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP5 ((uint32_t)0x00038000) /*!<SMP5[2:0] bits (Channel 5 Sample time selection) */
+#define ADC_SMPR2_SMP5_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP5_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP5_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP6 ((uint32_t)0x001C0000) /*!<SMP6[2:0] bits (Channel 6 Sample time selection) */
+#define ADC_SMPR2_SMP6_0 ((uint32_t)0x00040000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP6_1 ((uint32_t)0x00080000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP6_2 ((uint32_t)0x00100000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP7 ((uint32_t)0x00E00000) /*!<SMP7[2:0] bits (Channel 7 Sample time selection) */
+#define ADC_SMPR2_SMP7_0 ((uint32_t)0x00200000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP7_1 ((uint32_t)0x00400000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP7_2 ((uint32_t)0x00800000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP8 ((uint32_t)0x07000000) /*!<SMP8[2:0] bits (Channel 8 Sample time selection) */
+#define ADC_SMPR2_SMP8_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP8_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP8_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define ADC_SMPR2_SMP9 ((uint32_t)0x38000000) /*!<SMP9[2:0] bits (Channel 9 Sample time selection) */
+#define ADC_SMPR2_SMP9_0 ((uint32_t)0x08000000) /*!<Bit 0 */
+#define ADC_SMPR2_SMP9_1 ((uint32_t)0x10000000) /*!<Bit 1 */
+#define ADC_SMPR2_SMP9_2 ((uint32_t)0x20000000) /*!<Bit 2 */
+
+/****************** Bit definition for ADC_JOFR1 register *******************/
+#define ADC_JOFR1_JOFFSET1 ((uint32_t)0x0FFF) /*!<Data offset for injected channel 1 */
+
+/****************** Bit definition for ADC_JOFR2 register *******************/
+#define ADC_JOFR2_JOFFSET2 ((uint32_t)0x0FFF) /*!<Data offset for injected channel 2 */
+
+/****************** Bit definition for ADC_JOFR3 register *******************/
+#define ADC_JOFR3_JOFFSET3 ((uint32_t)0x0FFF) /*!<Data offset for injected channel 3 */
+
+/****************** Bit definition for ADC_JOFR4 register *******************/
+#define ADC_JOFR4_JOFFSET4 ((uint32_t)0x0FFF) /*!<Data offset for injected channel 4 */
+
+/******************* Bit definition for ADC_HTR register ********************/
+#define ADC_HTR_HT ((uint32_t)0x0FFF) /*!<Analog watchdog high threshold */
+
+/******************* Bit definition for ADC_LTR register ********************/
+#define ADC_LTR_LT ((uint32_t)0x0FFF) /*!<Analog watchdog low threshold */
+
+/******************* Bit definition for ADC_SQR1 register *******************/
+#define ADC_SQR1_SQ13 ((uint32_t)0x0000001F) /*!<SQ13[4:0] bits (13th conversion in regular sequence) */
+#define ADC_SQR1_SQ13_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SQR1_SQ13_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SQR1_SQ13_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SQR1_SQ13_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_SQR1_SQ13_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_SQR1_SQ14 ((uint32_t)0x000003E0) /*!<SQ14[4:0] bits (14th conversion in regular sequence) */
+#define ADC_SQR1_SQ14_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define ADC_SQR1_SQ14_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define ADC_SQR1_SQ14_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+#define ADC_SQR1_SQ14_3 ((uint32_t)0x00000100) /*!<Bit 3 */
+#define ADC_SQR1_SQ14_4 ((uint32_t)0x00000200) /*!<Bit 4 */
+#define ADC_SQR1_SQ15 ((uint32_t)0x00007C00) /*!<SQ15[4:0] bits (15th conversion in regular sequence) */
+#define ADC_SQR1_SQ15_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define ADC_SQR1_SQ15_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define ADC_SQR1_SQ15_2 ((uint32_t)0x00001000) /*!<Bit 2 */
+#define ADC_SQR1_SQ15_3 ((uint32_t)0x00002000) /*!<Bit 3 */
+#define ADC_SQR1_SQ15_4 ((uint32_t)0x00004000) /*!<Bit 4 */
+#define ADC_SQR1_SQ16 ((uint32_t)0x000F8000) /*!<SQ16[4:0] bits (16th conversion in regular sequence) */
+#define ADC_SQR1_SQ16_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SQR1_SQ16_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SQR1_SQ16_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SQR1_SQ16_3 ((uint32_t)0x00040000) /*!<Bit 3 */
+#define ADC_SQR1_SQ16_4 ((uint32_t)0x00080000) /*!<Bit 4 */
+#define ADC_SQR1_L ((uint32_t)0x00F00000) /*!<L[3:0] bits (Regular channel sequence length) */
+#define ADC_SQR1_L_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_SQR1_L_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define ADC_SQR1_L_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define ADC_SQR1_L_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+/******************* Bit definition for ADC_SQR2 register *******************/
+#define ADC_SQR2_SQ7 ((uint32_t)0x0000001F) /*!<SQ7[4:0] bits (7th conversion in regular sequence) */
+#define ADC_SQR2_SQ7_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SQR2_SQ7_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SQR2_SQ7_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SQR2_SQ7_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_SQR2_SQ7_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_SQR2_SQ8 ((uint32_t)0x000003E0) /*!<SQ8[4:0] bits (8th conversion in regular sequence) */
+#define ADC_SQR2_SQ8_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define ADC_SQR2_SQ8_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define ADC_SQR2_SQ8_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+#define ADC_SQR2_SQ8_3 ((uint32_t)0x00000100) /*!<Bit 3 */
+#define ADC_SQR2_SQ8_4 ((uint32_t)0x00000200) /*!<Bit 4 */
+#define ADC_SQR2_SQ9 ((uint32_t)0x00007C00) /*!<SQ9[4:0] bits (9th conversion in regular sequence) */
+#define ADC_SQR2_SQ9_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define ADC_SQR2_SQ9_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define ADC_SQR2_SQ9_2 ((uint32_t)0x00001000) /*!<Bit 2 */
+#define ADC_SQR2_SQ9_3 ((uint32_t)0x00002000) /*!<Bit 3 */
+#define ADC_SQR2_SQ9_4 ((uint32_t)0x00004000) /*!<Bit 4 */
+#define ADC_SQR2_SQ10 ((uint32_t)0x000F8000) /*!<SQ10[4:0] bits (10th conversion in regular sequence) */
+#define ADC_SQR2_SQ10_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SQR2_SQ10_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SQR2_SQ10_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SQR2_SQ10_3 ((uint32_t)0x00040000) /*!<Bit 3 */
+#define ADC_SQR2_SQ10_4 ((uint32_t)0x00080000) /*!<Bit 4 */
+#define ADC_SQR2_SQ11 ((uint32_t)0x01F00000) /*!<SQ11[4:0] bits (11th conversion in regular sequence) */
+#define ADC_SQR2_SQ11_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_SQR2_SQ11_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define ADC_SQR2_SQ11_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define ADC_SQR2_SQ11_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+#define ADC_SQR2_SQ11_4 ((uint32_t)0x01000000) /*!<Bit 4 */
+#define ADC_SQR2_SQ12 ((uint32_t)0x3E000000) /*!<SQ12[4:0] bits (12th conversion in regular sequence) */
+#define ADC_SQR2_SQ12_0 ((uint32_t)0x02000000) /*!<Bit 0 */
+#define ADC_SQR2_SQ12_1 ((uint32_t)0x04000000) /*!<Bit 1 */
+#define ADC_SQR2_SQ12_2 ((uint32_t)0x08000000) /*!<Bit 2 */
+#define ADC_SQR2_SQ12_3 ((uint32_t)0x10000000) /*!<Bit 3 */
+#define ADC_SQR2_SQ12_4 ((uint32_t)0x20000000) /*!<Bit 4 */
+
+/******************* Bit definition for ADC_SQR3 register *******************/
+#define ADC_SQR3_SQ1 ((uint32_t)0x0000001F) /*!<SQ1[4:0] bits (1st conversion in regular sequence) */
+#define ADC_SQR3_SQ1_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_SQR3_SQ1_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_SQR3_SQ1_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_SQR3_SQ1_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_SQR3_SQ1_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_SQR3_SQ2 ((uint32_t)0x000003E0) /*!<SQ2[4:0] bits (2nd conversion in regular sequence) */
+#define ADC_SQR3_SQ2_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define ADC_SQR3_SQ2_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define ADC_SQR3_SQ2_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+#define ADC_SQR3_SQ2_3 ((uint32_t)0x00000100) /*!<Bit 3 */
+#define ADC_SQR3_SQ2_4 ((uint32_t)0x00000200) /*!<Bit 4 */
+#define ADC_SQR3_SQ3 ((uint32_t)0x00007C00) /*!<SQ3[4:0] bits (3rd conversion in regular sequence) */
+#define ADC_SQR3_SQ3_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define ADC_SQR3_SQ3_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define ADC_SQR3_SQ3_2 ((uint32_t)0x00001000) /*!<Bit 2 */
+#define ADC_SQR3_SQ3_3 ((uint32_t)0x00002000) /*!<Bit 3 */
+#define ADC_SQR3_SQ3_4 ((uint32_t)0x00004000) /*!<Bit 4 */
+#define ADC_SQR3_SQ4 ((uint32_t)0x000F8000) /*!<SQ4[4:0] bits (4th conversion in regular sequence) */
+#define ADC_SQR3_SQ4_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_SQR3_SQ4_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_SQR3_SQ4_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_SQR3_SQ4_3 ((uint32_t)0x00040000) /*!<Bit 3 */
+#define ADC_SQR3_SQ4_4 ((uint32_t)0x00080000) /*!<Bit 4 */
+#define ADC_SQR3_SQ5 ((uint32_t)0x01F00000) /*!<SQ5[4:0] bits (5th conversion in regular sequence) */
+#define ADC_SQR3_SQ5_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_SQR3_SQ5_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define ADC_SQR3_SQ5_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define ADC_SQR3_SQ5_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+#define ADC_SQR3_SQ5_4 ((uint32_t)0x01000000) /*!<Bit 4 */
+#define ADC_SQR3_SQ6 ((uint32_t)0x3E000000) /*!<SQ6[4:0] bits (6th conversion in regular sequence) */
+#define ADC_SQR3_SQ6_0 ((uint32_t)0x02000000) /*!<Bit 0 */
+#define ADC_SQR3_SQ6_1 ((uint32_t)0x04000000) /*!<Bit 1 */
+#define ADC_SQR3_SQ6_2 ((uint32_t)0x08000000) /*!<Bit 2 */
+#define ADC_SQR3_SQ6_3 ((uint32_t)0x10000000) /*!<Bit 3 */
+#define ADC_SQR3_SQ6_4 ((uint32_t)0x20000000) /*!<Bit 4 */
+
+/******************* Bit definition for ADC_JSQR register *******************/
+#define ADC_JSQR_JSQ1 ((uint32_t)0x0000001F) /*!<JSQ1[4:0] bits (1st conversion in injected sequence) */
+#define ADC_JSQR_JSQ1_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_JSQR_JSQ1_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_JSQR_JSQ1_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_JSQR_JSQ1_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_JSQR_JSQ1_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_JSQR_JSQ2 ((uint32_t)0x000003E0) /*!<JSQ2[4:0] bits (2nd conversion in injected sequence) */
+#define ADC_JSQR_JSQ2_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define ADC_JSQR_JSQ2_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define ADC_JSQR_JSQ2_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+#define ADC_JSQR_JSQ2_3 ((uint32_t)0x00000100) /*!<Bit 3 */
+#define ADC_JSQR_JSQ2_4 ((uint32_t)0x00000200) /*!<Bit 4 */
+#define ADC_JSQR_JSQ3 ((uint32_t)0x00007C00) /*!<JSQ3[4:0] bits (3rd conversion in injected sequence) */
+#define ADC_JSQR_JSQ3_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define ADC_JSQR_JSQ3_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define ADC_JSQR_JSQ3_2 ((uint32_t)0x00001000) /*!<Bit 2 */
+#define ADC_JSQR_JSQ3_3 ((uint32_t)0x00002000) /*!<Bit 3 */
+#define ADC_JSQR_JSQ3_4 ((uint32_t)0x00004000) /*!<Bit 4 */
+#define ADC_JSQR_JSQ4 ((uint32_t)0x000F8000) /*!<JSQ4[4:0] bits (4th conversion in injected sequence) */
+#define ADC_JSQR_JSQ4_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define ADC_JSQR_JSQ4_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+#define ADC_JSQR_JSQ4_2 ((uint32_t)0x00020000) /*!<Bit 2 */
+#define ADC_JSQR_JSQ4_3 ((uint32_t)0x00040000) /*!<Bit 3 */
+#define ADC_JSQR_JSQ4_4 ((uint32_t)0x00080000) /*!<Bit 4 */
+#define ADC_JSQR_JL ((uint32_t)0x00300000) /*!<JL[1:0] bits (Injected Sequence length) */
+#define ADC_JSQR_JL_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define ADC_JSQR_JL_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+
+/******************* Bit definition for ADC_JDR1 register *******************/
+#define ADC_JDR1_JDATA ((uint32_t)0xFFFF) /*!<Injected data */
+
+/******************* Bit definition for ADC_JDR2 register *******************/
+#define ADC_JDR2_JDATA ((uint32_t)0xFFFF) /*!<Injected data */
+
+/******************* Bit definition for ADC_JDR3 register *******************/
+#define ADC_JDR3_JDATA ((uint32_t)0xFFFF) /*!<Injected data */
+
+/******************* Bit definition for ADC_JDR4 register *******************/
+#define ADC_JDR4_JDATA ((uint32_t)0xFFFF) /*!<Injected data */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!<Regular data */
+#define ADC_DR_ADC2DATA ((uint32_t)0xFFFF0000) /*!<ADC2 data */
+
+/******************* Bit definition for ADC_CSR register ********************/
+#define ADC_CSR_AWD1 ((uint32_t)0x00000001) /*!<ADC1 Analog watchdog flag */
+#define ADC_CSR_EOC1 ((uint32_t)0x00000002) /*!<ADC1 End of conversion */
+#define ADC_CSR_JEOC1 ((uint32_t)0x00000004) /*!<ADC1 Injected channel end of conversion */
+#define ADC_CSR_JSTRT1 ((uint32_t)0x00000008) /*!<ADC1 Injected channel Start flag */
+#define ADC_CSR_STRT1 ((uint32_t)0x00000010) /*!<ADC1 Regular channel Start flag */
+#define ADC_CSR_DOVR1 ((uint32_t)0x00000020) /*!<ADC1 DMA overrun flag */
+#define ADC_CSR_AWD2 ((uint32_t)0x00000100) /*!<ADC2 Analog watchdog flag */
+#define ADC_CSR_EOC2 ((uint32_t)0x00000200) /*!<ADC2 End of conversion */
+#define ADC_CSR_JEOC2 ((uint32_t)0x00000400) /*!<ADC2 Injected channel end of conversion */
+#define ADC_CSR_JSTRT2 ((uint32_t)0x00000800) /*!<ADC2 Injected channel Start flag */
+#define ADC_CSR_STRT2 ((uint32_t)0x00001000) /*!<ADC2 Regular channel Start flag */
+#define ADC_CSR_DOVR2 ((uint32_t)0x00002000) /*!<ADC2 DMA overrun flag */
+#define ADC_CSR_AWD3 ((uint32_t)0x00010000) /*!<ADC3 Analog watchdog flag */
+#define ADC_CSR_EOC3 ((uint32_t)0x00020000) /*!<ADC3 End of conversion */
+#define ADC_CSR_JEOC3 ((uint32_t)0x00040000) /*!<ADC3 Injected channel end of conversion */
+#define ADC_CSR_JSTRT3 ((uint32_t)0x00080000) /*!<ADC3 Injected channel Start flag */
+#define ADC_CSR_STRT3 ((uint32_t)0x00100000) /*!<ADC3 Regular channel Start flag */
+#define ADC_CSR_DOVR3 ((uint32_t)0x00200000) /*!<ADC3 DMA overrun flag */
+
+/******************* Bit definition for ADC_CCR register ********************/
+#define ADC_CCR_MULTI ((uint32_t)0x0000001F) /*!<MULTI[4:0] bits (Multi-ADC mode selection) */
+#define ADC_CCR_MULTI_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define ADC_CCR_MULTI_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define ADC_CCR_MULTI_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define ADC_CCR_MULTI_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define ADC_CCR_MULTI_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define ADC_CCR_DELAY ((uint32_t)0x00000F00) /*!<DELAY[3:0] bits (Delay between 2 sampling phases) */
+#define ADC_CCR_DELAY_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define ADC_CCR_DELAY_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define ADC_CCR_DELAY_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define ADC_CCR_DELAY_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define ADC_CCR_DDS ((uint32_t)0x00002000) /*!<DMA disable selection (Multi-ADC mode) */
+#define ADC_CCR_DMA ((uint32_t)0x0000C000) /*!<DMA[1:0] bits (Direct Memory Access mode for multimode) */
+#define ADC_CCR_DMA_0 ((uint32_t)0x00004000) /*!<Bit 0 */
+#define ADC_CCR_DMA_1 ((uint32_t)0x00008000) /*!<Bit 1 */
+#define ADC_CCR_ADCPRE ((uint32_t)0x00030000) /*!<ADCPRE[1:0] bits (ADC prescaler) */
+#define ADC_CCR_ADCPRE_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define ADC_CCR_ADCPRE_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define ADC_CCR_VBATE ((uint32_t)0x00400000) /*!<VBAT Enable */
+#define ADC_CCR_TSVREFE ((uint32_t)0x00800000) /*!<Temperature Sensor and VREFINT Enable */
+
+/******************* Bit definition for ADC_CDR register ********************/
+#define ADC_CDR_DATA1 ((uint32_t)0x0000FFFF) /*!<1st data of a pair of regular conversions */
+#define ADC_CDR_DATA2 ((uint32_t)0xFFFF0000) /*!<2nd data of a pair of regular conversions */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint32_t)0xFF) /*!< General-purpose 8-bit data register bits */
+
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint32_t)0x01) /*!< RESET bit */
+
+/******************************************************************************/
+/* */
+/* Debug MCU */
+/* */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* DMA Controller */
+/* */
+/******************************************************************************/
+/******************** Bits definition for DMA_SxCR register *****************/
+#define DMA_SxCR_CHSEL ((uint32_t)0x0E000000)
+#define DMA_SxCR_CHSEL_0 ((uint32_t)0x02000000)
+#define DMA_SxCR_CHSEL_1 ((uint32_t)0x04000000)
+#define DMA_SxCR_CHSEL_2 ((uint32_t)0x08000000)
+#define DMA_SxCR_MBURST ((uint32_t)0x01800000)
+#define DMA_SxCR_MBURST_0 ((uint32_t)0x00800000)
+#define DMA_SxCR_MBURST_1 ((uint32_t)0x01000000)
+#define DMA_SxCR_PBURST ((uint32_t)0x00600000)
+#define DMA_SxCR_PBURST_0 ((uint32_t)0x00200000)
+#define DMA_SxCR_PBURST_1 ((uint32_t)0x00400000)
+#define DMA_SxCR_ACK ((uint32_t)0x00100000)
+#define DMA_SxCR_CT ((uint32_t)0x00080000)
+#define DMA_SxCR_DBM ((uint32_t)0x00040000)
+#define DMA_SxCR_PL ((uint32_t)0x00030000)
+#define DMA_SxCR_PL_0 ((uint32_t)0x00010000)
+#define DMA_SxCR_PL_1 ((uint32_t)0x00020000)
+#define DMA_SxCR_PINCOS ((uint32_t)0x00008000)
+#define DMA_SxCR_MSIZE ((uint32_t)0x00006000)
+#define DMA_SxCR_MSIZE_0 ((uint32_t)0x00002000)
+#define DMA_SxCR_MSIZE_1 ((uint32_t)0x00004000)
+#define DMA_SxCR_PSIZE ((uint32_t)0x00001800)
+#define DMA_SxCR_PSIZE_0 ((uint32_t)0x00000800)
+#define DMA_SxCR_PSIZE_1 ((uint32_t)0x00001000)
+#define DMA_SxCR_MINC ((uint32_t)0x00000400)
+#define DMA_SxCR_PINC ((uint32_t)0x00000200)
+#define DMA_SxCR_CIRC ((uint32_t)0x00000100)
+#define DMA_SxCR_DIR ((uint32_t)0x000000C0)
+#define DMA_SxCR_DIR_0 ((uint32_t)0x00000040)
+#define DMA_SxCR_DIR_1 ((uint32_t)0x00000080)
+#define DMA_SxCR_PFCTRL ((uint32_t)0x00000020)
+#define DMA_SxCR_TCIE ((uint32_t)0x00000010)
+#define DMA_SxCR_HTIE ((uint32_t)0x00000008)
+#define DMA_SxCR_TEIE ((uint32_t)0x00000004)
+#define DMA_SxCR_DMEIE ((uint32_t)0x00000002)
+#define DMA_SxCR_EN ((uint32_t)0x00000001)
+
+/******************** Bits definition for DMA_SxCNDTR register **************/
+#define DMA_SxNDT ((uint32_t)0x0000FFFF)
+#define DMA_SxNDT_0 ((uint32_t)0x00000001)
+#define DMA_SxNDT_1 ((uint32_t)0x00000002)
+#define DMA_SxNDT_2 ((uint32_t)0x00000004)
+#define DMA_SxNDT_3 ((uint32_t)0x00000008)
+#define DMA_SxNDT_4 ((uint32_t)0x00000010)
+#define DMA_SxNDT_5 ((uint32_t)0x00000020)
+#define DMA_SxNDT_6 ((uint32_t)0x00000040)
+#define DMA_SxNDT_7 ((uint32_t)0x00000080)
+#define DMA_SxNDT_8 ((uint32_t)0x00000100)
+#define DMA_SxNDT_9 ((uint32_t)0x00000200)
+#define DMA_SxNDT_10 ((uint32_t)0x00000400)
+#define DMA_SxNDT_11 ((uint32_t)0x00000800)
+#define DMA_SxNDT_12 ((uint32_t)0x00001000)
+#define DMA_SxNDT_13 ((uint32_t)0x00002000)
+#define DMA_SxNDT_14 ((uint32_t)0x00004000)
+#define DMA_SxNDT_15 ((uint32_t)0x00008000)
+
+/******************** Bits definition for DMA_SxFCR register ****************/
+#define DMA_SxFCR_FEIE ((uint32_t)0x00000080)
+#define DMA_SxFCR_FS ((uint32_t)0x00000038)
+#define DMA_SxFCR_FS_0 ((uint32_t)0x00000008)
+#define DMA_SxFCR_FS_1 ((uint32_t)0x00000010)
+#define DMA_SxFCR_FS_2 ((uint32_t)0x00000020)
+#define DMA_SxFCR_DMDIS ((uint32_t)0x00000004)
+#define DMA_SxFCR_FTH ((uint32_t)0x00000003)
+#define DMA_SxFCR_FTH_0 ((uint32_t)0x00000001)
+#define DMA_SxFCR_FTH_1 ((uint32_t)0x00000002)
+
+/******************** Bits definition for DMA_LISR register *****************/
+#define DMA_LISR_TCIF3 ((uint32_t)0x08000000)
+#define DMA_LISR_HTIF3 ((uint32_t)0x04000000)
+#define DMA_LISR_TEIF3 ((uint32_t)0x02000000)
+#define DMA_LISR_DMEIF3 ((uint32_t)0x01000000)
+#define DMA_LISR_FEIF3 ((uint32_t)0x00400000)
+#define DMA_LISR_TCIF2 ((uint32_t)0x00200000)
+#define DMA_LISR_HTIF2 ((uint32_t)0x00100000)
+#define DMA_LISR_TEIF2 ((uint32_t)0x00080000)
+#define DMA_LISR_DMEIF2 ((uint32_t)0x00040000)
+#define DMA_LISR_FEIF2 ((uint32_t)0x00010000)
+#define DMA_LISR_TCIF1 ((uint32_t)0x00000800)
+#define DMA_LISR_HTIF1 ((uint32_t)0x00000400)
+#define DMA_LISR_TEIF1 ((uint32_t)0x00000200)
+#define DMA_LISR_DMEIF1 ((uint32_t)0x00000100)
+#define DMA_LISR_FEIF1 ((uint32_t)0x00000040)
+#define DMA_LISR_TCIF0 ((uint32_t)0x00000020)
+#define DMA_LISR_HTIF0 ((uint32_t)0x00000010)
+#define DMA_LISR_TEIF0 ((uint32_t)0x00000008)
+#define DMA_LISR_DMEIF0 ((uint32_t)0x00000004)
+#define DMA_LISR_FEIF0 ((uint32_t)0x00000001)
+
+/******************** Bits definition for DMA_HISR register *****************/
+#define DMA_HISR_TCIF7 ((uint32_t)0x08000000)
+#define DMA_HISR_HTIF7 ((uint32_t)0x04000000)
+#define DMA_HISR_TEIF7 ((uint32_t)0x02000000)
+#define DMA_HISR_DMEIF7 ((uint32_t)0x01000000)
+#define DMA_HISR_FEIF7 ((uint32_t)0x00400000)
+#define DMA_HISR_TCIF6 ((uint32_t)0x00200000)
+#define DMA_HISR_HTIF6 ((uint32_t)0x00100000)
+#define DMA_HISR_TEIF6 ((uint32_t)0x00080000)
+#define DMA_HISR_DMEIF6 ((uint32_t)0x00040000)
+#define DMA_HISR_FEIF6 ((uint32_t)0x00010000)
+#define DMA_HISR_TCIF5 ((uint32_t)0x00000800)
+#define DMA_HISR_HTIF5 ((uint32_t)0x00000400)
+#define DMA_HISR_TEIF5 ((uint32_t)0x00000200)
+#define DMA_HISR_DMEIF5 ((uint32_t)0x00000100)
+#define DMA_HISR_FEIF5 ((uint32_t)0x00000040)
+#define DMA_HISR_TCIF4 ((uint32_t)0x00000020)
+#define DMA_HISR_HTIF4 ((uint32_t)0x00000010)
+#define DMA_HISR_TEIF4 ((uint32_t)0x00000008)
+#define DMA_HISR_DMEIF4 ((uint32_t)0x00000004)
+#define DMA_HISR_FEIF4 ((uint32_t)0x00000001)
+
+/******************** Bits definition for DMA_LIFCR register ****************/
+#define DMA_LIFCR_CTCIF3 ((uint32_t)0x08000000)
+#define DMA_LIFCR_CHTIF3 ((uint32_t)0x04000000)
+#define DMA_LIFCR_CTEIF3 ((uint32_t)0x02000000)
+#define DMA_LIFCR_CDMEIF3 ((uint32_t)0x01000000)
+#define DMA_LIFCR_CFEIF3 ((uint32_t)0x00400000)
+#define DMA_LIFCR_CTCIF2 ((uint32_t)0x00200000)
+#define DMA_LIFCR_CHTIF2 ((uint32_t)0x00100000)
+#define DMA_LIFCR_CTEIF2 ((uint32_t)0x00080000)
+#define DMA_LIFCR_CDMEIF2 ((uint32_t)0x00040000)
+#define DMA_LIFCR_CFEIF2 ((uint32_t)0x00010000)
+#define DMA_LIFCR_CTCIF1 ((uint32_t)0x00000800)
+#define DMA_LIFCR_CHTIF1 ((uint32_t)0x00000400)
+#define DMA_LIFCR_CTEIF1 ((uint32_t)0x00000200)
+#define DMA_LIFCR_CDMEIF1 ((uint32_t)0x00000100)
+#define DMA_LIFCR_CFEIF1 ((uint32_t)0x00000040)
+#define DMA_LIFCR_CTCIF0 ((uint32_t)0x00000020)
+#define DMA_LIFCR_CHTIF0 ((uint32_t)0x00000010)
+#define DMA_LIFCR_CTEIF0 ((uint32_t)0x00000008)
+#define DMA_LIFCR_CDMEIF0 ((uint32_t)0x00000004)
+#define DMA_LIFCR_CFEIF0 ((uint32_t)0x00000001)
+
+/******************** Bits definition for DMA_HIFCR register ****************/
+#define DMA_HIFCR_CTCIF7 ((uint32_t)0x08000000)
+#define DMA_HIFCR_CHTIF7 ((uint32_t)0x04000000)
+#define DMA_HIFCR_CTEIF7 ((uint32_t)0x02000000)
+#define DMA_HIFCR_CDMEIF7 ((uint32_t)0x01000000)
+#define DMA_HIFCR_CFEIF7 ((uint32_t)0x00400000)
+#define DMA_HIFCR_CTCIF6 ((uint32_t)0x00200000)
+#define DMA_HIFCR_CHTIF6 ((uint32_t)0x00100000)
+#define DMA_HIFCR_CTEIF6 ((uint32_t)0x00080000)
+#define DMA_HIFCR_CDMEIF6 ((uint32_t)0x00040000)
+#define DMA_HIFCR_CFEIF6 ((uint32_t)0x00010000)
+#define DMA_HIFCR_CTCIF5 ((uint32_t)0x00000800)
+#define DMA_HIFCR_CHTIF5 ((uint32_t)0x00000400)
+#define DMA_HIFCR_CTEIF5 ((uint32_t)0x00000200)
+#define DMA_HIFCR_CDMEIF5 ((uint32_t)0x00000100)
+#define DMA_HIFCR_CFEIF5 ((uint32_t)0x00000040)
+#define DMA_HIFCR_CTCIF4 ((uint32_t)0x00000020)
+#define DMA_HIFCR_CHTIF4 ((uint32_t)0x00000010)
+#define DMA_HIFCR_CTEIF4 ((uint32_t)0x00000008)
+#define DMA_HIFCR_CDMEIF4 ((uint32_t)0x00000004)
+#define DMA_HIFCR_CFEIF4 ((uint32_t)0x00000001)
+
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR18 ((uint32_t)0x00040000) /*!< Interrupt Mask on line 18 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+
+/******************* Bit definition for EXTI_EMR register *******************/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR18 ((uint32_t)0x00040000) /*!< Event Mask on line 18 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+
+/****************** Bit definition for EXTI_RTSR register *******************/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR18 ((uint32_t)0x00040000) /*!< Rising trigger event configuration bit of line 18 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+
+/****************** Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR18 ((uint32_t)0x00040000) /*!< Falling trigger event configuration bit of line 18 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+
+/****************** Bit definition for EXTI_SWIER register ******************/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER18 ((uint32_t)0x00040000) /*!< Software Interrupt on line 18 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+
+/******************* Bit definition for EXTI_PR register ********************/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit for line 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit for line 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit for line 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit for line 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit for line 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit for line 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit for line 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit for line 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit for line 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit for line 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit for line 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit for line 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit for line 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit for line 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit for line 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit for line 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit for line 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit for line 17 */
+#define EXTI_PR_PR18 ((uint32_t)0x00040000) /*!< Pending bit for line 18 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit for line 19 */
+
+/******************************************************************************/
+/* */
+/* FLASH */
+/* */
+/******************************************************************************/
+/******************* Bits definition for FLASH_ACR register *****************/
+#define FLASH_ACR_LATENCY ((uint32_t)0x0000000F)
+#define FLASH_ACR_LATENCY_0WS ((uint32_t)0x00000000)
+#define FLASH_ACR_LATENCY_1WS ((uint32_t)0x00000001)
+#define FLASH_ACR_LATENCY_2WS ((uint32_t)0x00000002)
+#define FLASH_ACR_LATENCY_3WS ((uint32_t)0x00000003)
+#define FLASH_ACR_LATENCY_4WS ((uint32_t)0x00000004)
+#define FLASH_ACR_LATENCY_5WS ((uint32_t)0x00000005)
+#define FLASH_ACR_LATENCY_6WS ((uint32_t)0x00000006)
+#define FLASH_ACR_LATENCY_7WS ((uint32_t)0x00000007)
+
+#define FLASH_ACR_PRFTEN ((uint32_t)0x00000100)
+#define FLASH_ACR_ICEN ((uint32_t)0x00000200)
+#define FLASH_ACR_DCEN ((uint32_t)0x00000400)
+#define FLASH_ACR_ICRST ((uint32_t)0x00000800)
+#define FLASH_ACR_DCRST ((uint32_t)0x00001000)
+#define FLASH_ACR_BYTE0_ADDRESS ((uint32_t)0x40023C00)
+#define FLASH_ACR_BYTE2_ADDRESS ((uint32_t)0x40023C03)
+
+/******************* Bits definition for FLASH_SR register ******************/
+#define FLASH_SR_EOP ((uint32_t)0x00000001)
+#define FLASH_SR_SOP ((uint32_t)0x00000002)
+#define FLASH_SR_WRPERR ((uint32_t)0x00000010)
+#define FLASH_SR_PGAERR ((uint32_t)0x00000020)
+#define FLASH_SR_PGPERR ((uint32_t)0x00000040)
+#define FLASH_SR_PGSERR ((uint32_t)0x00000080)
+#define FLASH_SR_BSY ((uint32_t)0x00010000)
+
+/******************* Bits definition for FLASH_CR register ******************/
+#define FLASH_CR_PG ((uint32_t)0x00000001)
+#define FLASH_CR_SER ((uint32_t)0x00000002)
+#define FLASH_CR_MER ((uint32_t)0x00000004)
+#define FLASH_CR_SNB ((uint32_t)0x000000F8)
+#define FLASH_CR_SNB_0 ((uint32_t)0x00000008)
+#define FLASH_CR_SNB_1 ((uint32_t)0x00000010)
+#define FLASH_CR_SNB_2 ((uint32_t)0x00000020)
+#define FLASH_CR_SNB_3 ((uint32_t)0x00000040)
+#define FLASH_CR_SNB_4 ((uint32_t)0x00000080)
+#define FLASH_CR_PSIZE ((uint32_t)0x00000300)
+#define FLASH_CR_PSIZE_0 ((uint32_t)0x00000100)
+#define FLASH_CR_PSIZE_1 ((uint32_t)0x00000200)
+#define FLASH_CR_STRT ((uint32_t)0x00010000)
+#define FLASH_CR_EOPIE ((uint32_t)0x01000000)
+#define FLASH_CR_LOCK ((uint32_t)0x80000000)
+
+/******************* Bits definition for FLASH_OPTCR register ***************/
+#define FLASH_OPTCR_OPTLOCK ((uint32_t)0x00000001)
+#define FLASH_OPTCR_OPTSTRT ((uint32_t)0x00000002)
+#define FLASH_OPTCR_BOR_LEV_0 ((uint32_t)0x00000004)
+#define FLASH_OPTCR_BOR_LEV_1 ((uint32_t)0x00000008)
+#define FLASH_OPTCR_BOR_LEV ((uint32_t)0x0000000C)
+
+#define FLASH_OPTCR_WDG_SW ((uint32_t)0x00000020)
+#define FLASH_OPTCR_nRST_STOP ((uint32_t)0x00000040)
+#define FLASH_OPTCR_nRST_STDBY ((uint32_t)0x00000080)
+#define FLASH_OPTCR_RDP ((uint32_t)0x0000FF00)
+#define FLASH_OPTCR_RDP_0 ((uint32_t)0x00000100)
+#define FLASH_OPTCR_RDP_1 ((uint32_t)0x00000200)
+#define FLASH_OPTCR_RDP_2 ((uint32_t)0x00000400)
+#define FLASH_OPTCR_RDP_3 ((uint32_t)0x00000800)
+#define FLASH_OPTCR_RDP_4 ((uint32_t)0x00001000)
+#define FLASH_OPTCR_RDP_5 ((uint32_t)0x00002000)
+#define FLASH_OPTCR_RDP_6 ((uint32_t)0x00004000)
+#define FLASH_OPTCR_RDP_7 ((uint32_t)0x00008000)
+#define FLASH_OPTCR_nWRP ((uint32_t)0x0FFF0000)
+#define FLASH_OPTCR_nWRP_0 ((uint32_t)0x00010000)
+#define FLASH_OPTCR_nWRP_1 ((uint32_t)0x00020000)
+#define FLASH_OPTCR_nWRP_2 ((uint32_t)0x00040000)
+#define FLASH_OPTCR_nWRP_3 ((uint32_t)0x00080000)
+#define FLASH_OPTCR_nWRP_4 ((uint32_t)0x00100000)
+#define FLASH_OPTCR_nWRP_5 ((uint32_t)0x00200000)
+#define FLASH_OPTCR_nWRP_6 ((uint32_t)0x00400000)
+#define FLASH_OPTCR_nWRP_7 ((uint32_t)0x00800000)
+#define FLASH_OPTCR_nWRP_8 ((uint32_t)0x01000000)
+#define FLASH_OPTCR_nWRP_9 ((uint32_t)0x02000000)
+#define FLASH_OPTCR_nWRP_10 ((uint32_t)0x04000000)
+#define FLASH_OPTCR_nWRP_11 ((uint32_t)0x08000000)
+
+/****************** Bits definition for FLASH_OPTCR1 register ***************/
+#define FLASH_OPTCR1_nWRP ((uint32_t)0x0FFF0000)
+#define FLASH_OPTCR1_nWRP_0 ((uint32_t)0x00010000)
+#define FLASH_OPTCR1_nWRP_1 ((uint32_t)0x00020000)
+#define FLASH_OPTCR1_nWRP_2 ((uint32_t)0x00040000)
+#define FLASH_OPTCR1_nWRP_3 ((uint32_t)0x00080000)
+#define FLASH_OPTCR1_nWRP_4 ((uint32_t)0x00100000)
+#define FLASH_OPTCR1_nWRP_5 ((uint32_t)0x00200000)
+#define FLASH_OPTCR1_nWRP_6 ((uint32_t)0x00400000)
+#define FLASH_OPTCR1_nWRP_7 ((uint32_t)0x00800000)
+#define FLASH_OPTCR1_nWRP_8 ((uint32_t)0x01000000)
+#define FLASH_OPTCR1_nWRP_9 ((uint32_t)0x02000000)
+#define FLASH_OPTCR1_nWRP_10 ((uint32_t)0x04000000)
+#define FLASH_OPTCR1_nWRP_11 ((uint32_t)0x08000000)
+
+/******************************************************************************/
+/* */
+/* General Purpose I/O */
+/* */
+/******************************************************************************/
+/****************** Bits definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
+
+#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
+
+#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
+
+#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
+
+#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
+
+#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
+
+#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
+
+#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
+
+#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
+
+#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
+
+#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
+
+#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
+
+#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
+
+#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
+
+#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
+
+#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
+
+/****************** Bits definition for GPIO_OTYPER register ****************/
+#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
+
+/****************** Bits definition for GPIO_OSPEEDR register ***************/
+#define GPIO_OSPEEDER_OSPEEDR0 ((uint32_t)0x00000003)
+#define GPIO_OSPEEDER_OSPEEDR0_0 ((uint32_t)0x00000001)
+#define GPIO_OSPEEDER_OSPEEDR0_1 ((uint32_t)0x00000002)
+
+#define GPIO_OSPEEDER_OSPEEDR1 ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDER_OSPEEDR1_0 ((uint32_t)0x00000004)
+#define GPIO_OSPEEDER_OSPEEDR1_1 ((uint32_t)0x00000008)
+
+#define GPIO_OSPEEDER_OSPEEDR2 ((uint32_t)0x00000030)
+#define GPIO_OSPEEDER_OSPEEDR2_0 ((uint32_t)0x00000010)
+#define GPIO_OSPEEDER_OSPEEDR2_1 ((uint32_t)0x00000020)
+
+#define GPIO_OSPEEDER_OSPEEDR3 ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDER_OSPEEDR3_0 ((uint32_t)0x00000040)
+#define GPIO_OSPEEDER_OSPEEDR3_1 ((uint32_t)0x00000080)
+
+#define GPIO_OSPEEDER_OSPEEDR4 ((uint32_t)0x00000300)
+#define GPIO_OSPEEDER_OSPEEDR4_0 ((uint32_t)0x00000100)
+#define GPIO_OSPEEDER_OSPEEDR4_1 ((uint32_t)0x00000200)
+
+#define GPIO_OSPEEDER_OSPEEDR5 ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDER_OSPEEDR5_0 ((uint32_t)0x00000400)
+#define GPIO_OSPEEDER_OSPEEDR5_1 ((uint32_t)0x00000800)
+
+#define GPIO_OSPEEDER_OSPEEDR6 ((uint32_t)0x00003000)
+#define GPIO_OSPEEDER_OSPEEDR6_0 ((uint32_t)0x00001000)
+#define GPIO_OSPEEDER_OSPEEDR6_1 ((uint32_t)0x00002000)
+
+#define GPIO_OSPEEDER_OSPEEDR7 ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDER_OSPEEDR7_0 ((uint32_t)0x00004000)
+#define GPIO_OSPEEDER_OSPEEDR7_1 ((uint32_t)0x00008000)
+
+#define GPIO_OSPEEDER_OSPEEDR8 ((uint32_t)0x00030000)
+#define GPIO_OSPEEDER_OSPEEDR8_0 ((uint32_t)0x00010000)
+#define GPIO_OSPEEDER_OSPEEDR8_1 ((uint32_t)0x00020000)
+
+#define GPIO_OSPEEDER_OSPEEDR9 ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDER_OSPEEDR9_0 ((uint32_t)0x00040000)
+#define GPIO_OSPEEDER_OSPEEDR9_1 ((uint32_t)0x00080000)
+
+#define GPIO_OSPEEDER_OSPEEDR10 ((uint32_t)0x00300000)
+#define GPIO_OSPEEDER_OSPEEDR10_0 ((uint32_t)0x00100000)
+#define GPIO_OSPEEDER_OSPEEDR10_1 ((uint32_t)0x00200000)
+
+#define GPIO_OSPEEDER_OSPEEDR11 ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDER_OSPEEDR11_0 ((uint32_t)0x00400000)
+#define GPIO_OSPEEDER_OSPEEDR11_1 ((uint32_t)0x00800000)
+
+#define GPIO_OSPEEDER_OSPEEDR12 ((uint32_t)0x03000000)
+#define GPIO_OSPEEDER_OSPEEDR12_0 ((uint32_t)0x01000000)
+#define GPIO_OSPEEDER_OSPEEDR12_1 ((uint32_t)0x02000000)
+
+#define GPIO_OSPEEDER_OSPEEDR13 ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDER_OSPEEDR13_0 ((uint32_t)0x04000000)
+#define GPIO_OSPEEDER_OSPEEDR13_1 ((uint32_t)0x08000000)
+
+#define GPIO_OSPEEDER_OSPEEDR14 ((uint32_t)0x30000000)
+#define GPIO_OSPEEDER_OSPEEDR14_0 ((uint32_t)0x10000000)
+#define GPIO_OSPEEDER_OSPEEDR14_1 ((uint32_t)0x20000000)
+
+#define GPIO_OSPEEDER_OSPEEDR15 ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDER_OSPEEDR15_0 ((uint32_t)0x40000000)
+#define GPIO_OSPEEDER_OSPEEDR15_1 ((uint32_t)0x80000000)
+
+/****************** Bits definition for GPIO_PUPDR register *****************/
+#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
+
+#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
+
+#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
+
+#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
+
+#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
+
+#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
+
+#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
+
+#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
+
+#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
+
+#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
+
+#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
+
+#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
+
+#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
+
+#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
+
+#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
+
+#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
+
+/****************** Bits definition for GPIO_IDR register *******************/
+#define GPIO_IDR_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_IDR_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_IDR_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_IDR_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_IDR_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_IDR_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_IDR_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_IDR_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_IDR_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_IDR_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_IDR_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_IDR_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_IDR_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_IDR_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_IDR_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_IDR_IDR_15 ((uint32_t)0x00008000)
+/* Old GPIO_IDR register bits definition, maintained for legacy purpose */
+#define GPIO_OTYPER_IDR_0 GPIO_IDR_IDR_0
+#define GPIO_OTYPER_IDR_1 GPIO_IDR_IDR_1
+#define GPIO_OTYPER_IDR_2 GPIO_IDR_IDR_2
+#define GPIO_OTYPER_IDR_3 GPIO_IDR_IDR_3
+#define GPIO_OTYPER_IDR_4 GPIO_IDR_IDR_4
+#define GPIO_OTYPER_IDR_5 GPIO_IDR_IDR_5
+#define GPIO_OTYPER_IDR_6 GPIO_IDR_IDR_6
+#define GPIO_OTYPER_IDR_7 GPIO_IDR_IDR_7
+#define GPIO_OTYPER_IDR_8 GPIO_IDR_IDR_8
+#define GPIO_OTYPER_IDR_9 GPIO_IDR_IDR_9
+#define GPIO_OTYPER_IDR_10 GPIO_IDR_IDR_10
+#define GPIO_OTYPER_IDR_11 GPIO_IDR_IDR_11
+#define GPIO_OTYPER_IDR_12 GPIO_IDR_IDR_12
+#define GPIO_OTYPER_IDR_13 GPIO_IDR_IDR_13
+#define GPIO_OTYPER_IDR_14 GPIO_IDR_IDR_14
+#define GPIO_OTYPER_IDR_15 GPIO_IDR_IDR_15
+
+/****************** Bits definition for GPIO_ODR register *******************/
+#define GPIO_ODR_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_ODR_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_ODR_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_ODR_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_ODR_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_ODR_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_ODR_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_ODR_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_ODR_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_ODR_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_ODR_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_ODR_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_ODR_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_ODR_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_ODR_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_ODR_ODR_15 ((uint32_t)0x00008000)
+/* Old GPIO_ODR register bits definition, maintained for legacy purpose */
+#define GPIO_OTYPER_ODR_0 GPIO_ODR_ODR_0
+#define GPIO_OTYPER_ODR_1 GPIO_ODR_ODR_1
+#define GPIO_OTYPER_ODR_2 GPIO_ODR_ODR_2
+#define GPIO_OTYPER_ODR_3 GPIO_ODR_ODR_3
+#define GPIO_OTYPER_ODR_4 GPIO_ODR_ODR_4
+#define GPIO_OTYPER_ODR_5 GPIO_ODR_ODR_5
+#define GPIO_OTYPER_ODR_6 GPIO_ODR_ODR_6
+#define GPIO_OTYPER_ODR_7 GPIO_ODR_ODR_7
+#define GPIO_OTYPER_ODR_8 GPIO_ODR_ODR_8
+#define GPIO_OTYPER_ODR_9 GPIO_ODR_ODR_9
+#define GPIO_OTYPER_ODR_10 GPIO_ODR_ODR_10
+#define GPIO_OTYPER_ODR_11 GPIO_ODR_ODR_11
+#define GPIO_OTYPER_ODR_12 GPIO_ODR_ODR_12
+#define GPIO_OTYPER_ODR_13 GPIO_ODR_ODR_13
+#define GPIO_OTYPER_ODR_14 GPIO_ODR_ODR_14
+#define GPIO_OTYPER_ODR_15 GPIO_ODR_ODR_15
+
+/****************** Bits definition for GPIO_BSRR register ******************/
+#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register *********************/
+#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK ((uint32_t)0x00010000)
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface */
+/* */
+/******************************************************************************/
+/******************* Bit definition for I2C_CR1 register ********************/
+#define I2C_CR1_PE ((uint32_t)0x00000001) /*!<Peripheral Enable */
+#define I2C_CR1_SMBUS ((uint32_t)0x00000002) /*!<SMBus Mode */
+#define I2C_CR1_SMBTYPE ((uint32_t)0x00000008) /*!<SMBus Type */
+#define I2C_CR1_ENARP ((uint32_t)0x00000010) /*!<ARP Enable */
+#define I2C_CR1_ENPEC ((uint32_t)0x00000020) /*!<PEC Enable */
+#define I2C_CR1_ENGC ((uint32_t)0x00000040) /*!<General Call Enable */
+#define I2C_CR1_NOSTRETCH ((uint32_t)0x00000080) /*!<Clock Stretching Disable (Slave mode) */
+#define I2C_CR1_START ((uint32_t)0x00000100) /*!<Start Generation */
+#define I2C_CR1_STOP ((uint32_t)0x00000200) /*!<Stop Generation */
+#define I2C_CR1_ACK ((uint32_t)0x00000400) /*!<Acknowledge Enable */
+#define I2C_CR1_POS ((uint32_t)0x00000800) /*!<Acknowledge/PEC Position (for data reception) */
+#define I2C_CR1_PEC ((uint32_t)0x00001000) /*!<Packet Error Checking */
+#define I2C_CR1_ALERT ((uint32_t)0x00002000) /*!<SMBus Alert */
+#define I2C_CR1_SWRST ((uint32_t)0x00008000) /*!<Software Reset */
+
+/******************* Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_FREQ ((uint32_t)0x0000003F) /*!<FREQ[5:0] bits (Peripheral Clock Frequency) */
+#define I2C_CR2_FREQ_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define I2C_CR2_FREQ_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define I2C_CR2_FREQ_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define I2C_CR2_FREQ_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define I2C_CR2_FREQ_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define I2C_CR2_FREQ_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+
+#define I2C_CR2_ITERREN ((uint32_t)0x00000100) /*!<Error Interrupt Enable */
+#define I2C_CR2_ITEVTEN ((uint32_t)0x00000200) /*!<Event Interrupt Enable */
+#define I2C_CR2_ITBUFEN ((uint32_t)0x00000400) /*!<Buffer Interrupt Enable */
+#define I2C_CR2_DMAEN ((uint32_t)0x00000800) /*!<DMA Requests Enable */
+#define I2C_CR2_LAST ((uint32_t)0x00001000) /*!<DMA Last Transfer */
+
+/******************* Bit definition for I2C_OAR1 register *******************/
+#define I2C_OAR1_ADD1_7 ((uint32_t)0x000000FE) /*!<Interface Address */
+#define I2C_OAR1_ADD8_9 ((uint32_t)0x00000300) /*!<Interface Address */
+
+#define I2C_OAR1_ADD0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define I2C_OAR1_ADD1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define I2C_OAR1_ADD2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define I2C_OAR1_ADD3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define I2C_OAR1_ADD4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define I2C_OAR1_ADD5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define I2C_OAR1_ADD6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define I2C_OAR1_ADD7 ((uint32_t)0x00000080) /*!<Bit 7 */
+#define I2C_OAR1_ADD8 ((uint32_t)0x00000100) /*!<Bit 8 */
+#define I2C_OAR1_ADD9 ((uint32_t)0x00000200) /*!<Bit 9 */
+
+#define I2C_OAR1_ADDMODE ((uint32_t)0x00008000) /*!<Addressing Mode (Slave mode) */
+
+/******************* Bit definition for I2C_OAR2 register *******************/
+#define I2C_OAR2_ENDUAL ((uint32_t)0x00000001) /*!<Dual addressing mode enable */
+#define I2C_OAR2_ADD2 ((uint32_t)0x000000FE) /*!<Interface address */
+
+/******************** Bit definition for I2C_DR register ********************/
+#define I2C_DR_DR ((uint32_t)0x000000FF) /*!<8-bit Data Register */
+
+/******************* Bit definition for I2C_SR1 register ********************/
+#define I2C_SR1_SB ((uint32_t)0x00000001) /*!<Start Bit (Master mode) */
+#define I2C_SR1_ADDR ((uint32_t)0x00000002) /*!<Address sent (master mode)/matched (slave mode) */
+#define I2C_SR1_BTF ((uint32_t)0x00000004) /*!<Byte Transfer Finished */
+#define I2C_SR1_ADD10 ((uint32_t)0x00000008) /*!<10-bit header sent (Master mode) */
+#define I2C_SR1_STOPF ((uint32_t)0x00000010) /*!<Stop detection (Slave mode) */
+#define I2C_SR1_RXNE ((uint32_t)0x00000040) /*!<Data Register not Empty (receivers) */
+#define I2C_SR1_TXE ((uint32_t)0x00000080) /*!<Data Register Empty (transmitters) */
+#define I2C_SR1_BERR ((uint32_t)0x00000100) /*!<Bus Error */
+#define I2C_SR1_ARLO ((uint32_t)0x00000200) /*!<Arbitration Lost (master mode) */
+#define I2C_SR1_AF ((uint32_t)0x00000400) /*!<Acknowledge Failure */
+#define I2C_SR1_OVR ((uint32_t)0x00000800) /*!<Overrun/Underrun */
+#define I2C_SR1_PECERR ((uint32_t)0x00001000) /*!<PEC Error in reception */
+#define I2C_SR1_TIMEOUT ((uint32_t)0x00004000) /*!<Timeout or Tlow Error */
+#define I2C_SR1_SMBALERT ((uint32_t)0x00008000) /*!<SMBus Alert */
+
+/******************* Bit definition for I2C_SR2 register ********************/
+#define I2C_SR2_MSL ((uint32_t)0x00000001) /*!<Master/Slave */
+#define I2C_SR2_BUSY ((uint32_t)0x00000002) /*!<Bus Busy */
+#define I2C_SR2_TRA ((uint32_t)0x00000004) /*!<Transmitter/Receiver */
+#define I2C_SR2_GENCALL ((uint32_t)0x00000010) /*!<General Call Address (Slave mode) */
+#define I2C_SR2_SMBDEFAULT ((uint32_t)0x00000020) /*!<SMBus Device Default Address (Slave mode) */
+#define I2C_SR2_SMBHOST ((uint32_t)0x00000040) /*!<SMBus Host Header (Slave mode) */
+#define I2C_SR2_DUALF ((uint32_t)0x00000080) /*!<Dual Flag (Slave mode) */
+#define I2C_SR2_PEC ((uint32_t)0x0000FF00) /*!<Packet Error Checking Register */
+
+/******************* Bit definition for I2C_CCR register ********************/
+#define I2C_CCR_CCR ((uint32_t)0x00000FFF) /*!<Clock Control Register in Fast/Standard mode (Master mode) */
+#define I2C_CCR_DUTY ((uint32_t)0x00004000) /*!<Fast Mode Duty Cycle */
+#define I2C_CCR_FS ((uint32_t)0x00008000) /*!<I2C Master Mode Selection */
+
+/****************** Bit definition for I2C_TRISE register *******************/
+#define I2C_TRISE_TRISE ((uint32_t)0x0000003F) /*!<Maximum Rise Time in Fast/Standard mode (Master mode) */
+
+/****************** Bit definition for I2C_FLTR register *******************/
+#define I2C_FLTR_DNF ((uint32_t)0x0000000F) /*!<Digital Noise Filter */
+#define I2C_FLTR_ANOFF ((uint32_t)0x00000010) /*!<Analog Noise Filter OFF */
+
+/******************************************************************************/
+/* */
+/* Independent WATCHDOG */
+/* */
+/******************************************************************************/
+/******************* Bit definition for IWDG_KR register ********************/
+#define IWDG_KR_KEY ((uint32_t)0xFFFF) /*!<Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register ********************/
+#define IWDG_PR_PR ((uint32_t)0x07) /*!<PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint32_t)0x01) /*!<Bit 0 */
+#define IWDG_PR_PR_1 ((uint32_t)0x02) /*!<Bit 1 */
+#define IWDG_PR_PR_2 ((uint32_t)0x04) /*!<Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register *******************/
+#define IWDG_RLR_RL ((uint32_t)0x0FFF) /*!<Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register ********************/
+#define IWDG_SR_PVU ((uint32_t)0x01) /*!<Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint32_t)0x02) /*!<Watchdog counter reload value update */
+
+
+/******************************************************************************/
+/* */
+/* Power Control */
+/* */
+/******************************************************************************/
+/******************** Bit definition for PWR_CR register ********************/
+#define PWR_CR_LPDS ((uint32_t)0x00000001) /*!< Low-Power Deepsleep */
+#define PWR_CR_PDDS ((uint32_t)0x00000002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint32_t)0x00000004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint32_t)0x00000008) /*!< Clear Standby Flag */
+#define PWR_CR_PVDE ((uint32_t)0x00000010) /*!< Power Voltage Detector Enable */
+
+#define PWR_CR_PLS ((uint32_t)0x000000E0) /*!< PLS[2:0] bits (PVD Level Selection) */
+#define PWR_CR_PLS_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define PWR_CR_PLS_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define PWR_CR_PLS_2 ((uint32_t)0x00000080) /*!< Bit 2 */
+
+/*!< PVD level configuration */
+#define PWR_CR_PLS_LEV0 ((uint32_t)0x00000000) /*!< PVD level 0 */
+#define PWR_CR_PLS_LEV1 ((uint32_t)0x00000020) /*!< PVD level 1 */
+#define PWR_CR_PLS_LEV2 ((uint32_t)0x00000040) /*!< PVD level 2 */
+#define PWR_CR_PLS_LEV3 ((uint32_t)0x00000060) /*!< PVD level 3 */
+#define PWR_CR_PLS_LEV4 ((uint32_t)0x00000080) /*!< PVD level 4 */
+#define PWR_CR_PLS_LEV5 ((uint32_t)0x000000A0) /*!< PVD level 5 */
+#define PWR_CR_PLS_LEV6 ((uint32_t)0x000000C0) /*!< PVD level 6 */
+#define PWR_CR_PLS_LEV7 ((uint32_t)0x000000E0) /*!< PVD level 7 */
+
+#define PWR_CR_DBP ((uint32_t)0x00000100) /*!< Disable Backup Domain write protection */
+#define PWR_CR_FPDS ((uint32_t)0x00000200) /*!< Flash power down in Stop mode */
+#define PWR_CR_LPLVDS ((uint32_t)0x00000400) /*!< Low Power Regulator Low Voltage in Deep Sleep mode */
+#define PWR_CR_MRLVDS ((uint32_t)0x00000800) /*!< Main Regulator Low Voltage in Deep Sleep mode */
+#define PWR_CR_ADCDC1 ((uint32_t)0x00002000) /*!< Refer to AN4073 on how to use this bit */
+
+#define PWR_CR_VOS ((uint32_t)0x0000C000) /*!< VOS[1:0] bits (Regulator voltage scaling output selection) */
+#define PWR_CR_VOS_0 ((uint32_t)0x00004000) /*!< Bit 0 */
+#define PWR_CR_VOS_1 ((uint32_t)0x00008000) /*!< Bit 1 */
+
+#define PWR_CR_FMSSR ((uint32_t)0x00100000) /*!< Flash Memory Sleep System Run */
+#define PWR_CR_FISSR ((uint32_t)0x00200000) /*!< Flash Interface Stop while System Run */
+/* Legacy define */
+#define PWR_CR_PMODE PWR_CR_VOS
+
+/******************* Bit definition for PWR_CSR register ********************/
+#define PWR_CSR_WUF ((uint32_t)0x00000001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint32_t)0x00000002) /*!< Standby Flag */
+#define PWR_CSR_PVDO ((uint32_t)0x00000004) /*!< PVD Output */
+#define PWR_CSR_BRR ((uint32_t)0x00000008) /*!< Backup regulator ready */
+#define PWR_CSR_EWUP ((uint32_t)0x00000100) /*!< Enable WKUP pin */
+#define PWR_CSR_BRE ((uint32_t)0x00000200) /*!< Backup regulator enable */
+#define PWR_CSR_VOSRDY ((uint32_t)0x00004000) /*!< Regulator voltage scaling output selection ready */
+
+/* Legacy define */
+#define PWR_CSR_REGRDY PWR_CSR_VOSRDY
+
+/******************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/******************************************************************************/
+/******************** Bit definition for RCC_CR register ********************/
+#define RCC_CR_HSION ((uint32_t)0x00000001)
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002)
+
+#define RCC_CR_HSITRIM ((uint32_t)0x000000F8)
+#define RCC_CR_HSITRIM_0 ((uint32_t)0x00000008)/*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 ((uint32_t)0x00000010)/*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 ((uint32_t)0x00000020)/*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 ((uint32_t)0x00000040)/*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 ((uint32_t)0x00000080)/*!<Bit 4 */
+
+#define RCC_CR_HSICAL ((uint32_t)0x0000FF00)
+#define RCC_CR_HSICAL_0 ((uint32_t)0x00000100)/*!<Bit 0 */
+#define RCC_CR_HSICAL_1 ((uint32_t)0x00000200)/*!<Bit 1 */
+#define RCC_CR_HSICAL_2 ((uint32_t)0x00000400)/*!<Bit 2 */
+#define RCC_CR_HSICAL_3 ((uint32_t)0x00000800)/*!<Bit 3 */
+#define RCC_CR_HSICAL_4 ((uint32_t)0x00001000)/*!<Bit 4 */
+#define RCC_CR_HSICAL_5 ((uint32_t)0x00002000)/*!<Bit 5 */
+#define RCC_CR_HSICAL_6 ((uint32_t)0x00004000)/*!<Bit 6 */
+#define RCC_CR_HSICAL_7 ((uint32_t)0x00008000)/*!<Bit 7 */
+
+#define RCC_CR_HSEON ((uint32_t)0x00010000)
+#define RCC_CR_HSERDY ((uint32_t)0x00020000)
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000)
+#define RCC_CR_CSSON ((uint32_t)0x00080000)
+#define RCC_CR_PLLON ((uint32_t)0x01000000)
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000)
+#define RCC_CR_PLLI2SON ((uint32_t)0x04000000)
+#define RCC_CR_PLLI2SRDY ((uint32_t)0x08000000)
+
+/******************** Bit definition for RCC_PLLCFGR register ***************/
+#define RCC_PLLCFGR_PLLM ((uint32_t)0x0000003F)
+#define RCC_PLLCFGR_PLLM_0 ((uint32_t)0x00000001)
+#define RCC_PLLCFGR_PLLM_1 ((uint32_t)0x00000002)
+#define RCC_PLLCFGR_PLLM_2 ((uint32_t)0x00000004)
+#define RCC_PLLCFGR_PLLM_3 ((uint32_t)0x00000008)
+#define RCC_PLLCFGR_PLLM_4 ((uint32_t)0x00000010)
+#define RCC_PLLCFGR_PLLM_5 ((uint32_t)0x00000020)
+
+#define RCC_PLLCFGR_PLLN ((uint32_t)0x00007FC0)
+#define RCC_PLLCFGR_PLLN_0 ((uint32_t)0x00000040)
+#define RCC_PLLCFGR_PLLN_1 ((uint32_t)0x00000080)
+#define RCC_PLLCFGR_PLLN_2 ((uint32_t)0x00000100)
+#define RCC_PLLCFGR_PLLN_3 ((uint32_t)0x00000200)
+#define RCC_PLLCFGR_PLLN_4 ((uint32_t)0x00000400)
+#define RCC_PLLCFGR_PLLN_5 ((uint32_t)0x00000800)
+#define RCC_PLLCFGR_PLLN_6 ((uint32_t)0x00001000)
+#define RCC_PLLCFGR_PLLN_7 ((uint32_t)0x00002000)
+#define RCC_PLLCFGR_PLLN_8 ((uint32_t)0x00004000)
+
+#define RCC_PLLCFGR_PLLP ((uint32_t)0x00030000)
+#define RCC_PLLCFGR_PLLP_0 ((uint32_t)0x00010000)
+#define RCC_PLLCFGR_PLLP_1 ((uint32_t)0x00020000)
+
+#define RCC_PLLCFGR_PLLSRC ((uint32_t)0x00400000)
+#define RCC_PLLCFGR_PLLSRC_HSE ((uint32_t)0x00400000)
+#define RCC_PLLCFGR_PLLSRC_HSI ((uint32_t)0x00000000)
+
+#define RCC_PLLCFGR_PLLQ ((uint32_t)0x0F000000)
+#define RCC_PLLCFGR_PLLQ_0 ((uint32_t)0x01000000)
+#define RCC_PLLCFGR_PLLQ_1 ((uint32_t)0x02000000)
+#define RCC_PLLCFGR_PLLQ_2 ((uint32_t)0x04000000)
+#define RCC_PLLCFGR_PLLQ_3 ((uint32_t)0x08000000)
+
+/******************** Bit definition for RCC_CFGR register ******************/
+/*!< SW configuration */
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+/*!< PPRE1 configuration */
+#define RCC_CFGR_PPRE1 ((uint32_t)0x00001C00) /*!< PRE1[2:0] bits (APB1 prescaler) */
+#define RCC_CFGR_PPRE1_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define RCC_CFGR_PPRE1_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define RCC_CFGR_PPRE1_2 ((uint32_t)0x00001000) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE1_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE1_DIV2 ((uint32_t)0x00001000) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE1_DIV4 ((uint32_t)0x00001400) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE1_DIV8 ((uint32_t)0x00001800) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE1_DIV16 ((uint32_t)0x00001C00) /*!< HCLK divided by 16 */
+
+/*!< PPRE2 configuration */
+#define RCC_CFGR_PPRE2 ((uint32_t)0x0000E000) /*!< PRE2[2:0] bits (APB2 prescaler) */
+#define RCC_CFGR_PPRE2_0 ((uint32_t)0x00002000) /*!< Bit 0 */
+#define RCC_CFGR_PPRE2_1 ((uint32_t)0x00004000) /*!< Bit 1 */
+#define RCC_CFGR_PPRE2_2 ((uint32_t)0x00008000) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE2_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE2_DIV2 ((uint32_t)0x00008000) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE2_DIV4 ((uint32_t)0x0000A000) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE2_DIV8 ((uint32_t)0x0000C000) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE2_DIV16 ((uint32_t)0x0000E000) /*!< HCLK divided by 16 */
+
+/*!< RTCPRE configuration */
+#define RCC_CFGR_RTCPRE ((uint32_t)0x001F0000)
+#define RCC_CFGR_RTCPRE_0 ((uint32_t)0x00010000)
+#define RCC_CFGR_RTCPRE_1 ((uint32_t)0x00020000)
+#define RCC_CFGR_RTCPRE_2 ((uint32_t)0x00040000)
+#define RCC_CFGR_RTCPRE_3 ((uint32_t)0x00080000)
+#define RCC_CFGR_RTCPRE_4 ((uint32_t)0x00100000)
+
+/*!< MCO1 configuration */
+#define RCC_CFGR_MCO1 ((uint32_t)0x00600000)
+#define RCC_CFGR_MCO1_0 ((uint32_t)0x00200000)
+#define RCC_CFGR_MCO1_1 ((uint32_t)0x00400000)
+
+#define RCC_CFGR_I2SSRC ((uint32_t)0x00800000)
+
+#define RCC_CFGR_MCO1PRE ((uint32_t)0x07000000)
+#define RCC_CFGR_MCO1PRE_0 ((uint32_t)0x01000000)
+#define RCC_CFGR_MCO1PRE_1 ((uint32_t)0x02000000)
+#define RCC_CFGR_MCO1PRE_2 ((uint32_t)0x04000000)
+
+#define RCC_CFGR_MCO2PRE ((uint32_t)0x38000000)
+#define RCC_CFGR_MCO2PRE_0 ((uint32_t)0x08000000)
+#define RCC_CFGR_MCO2PRE_1 ((uint32_t)0x10000000)
+#define RCC_CFGR_MCO2PRE_2 ((uint32_t)0x20000000)
+
+#define RCC_CFGR_MCO2 ((uint32_t)0xC0000000)
+#define RCC_CFGR_MCO2_0 ((uint32_t)0x40000000)
+#define RCC_CFGR_MCO2_1 ((uint32_t)0x80000000)
+
+/******************** Bit definition for RCC_CIR register *******************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001)
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002)
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004)
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008)
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010)
+#define RCC_CIR_PLLI2SRDYF ((uint32_t)0x00000020)
+
+#define RCC_CIR_CSSF ((uint32_t)0x00000080)
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100)
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200)
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400)
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800)
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000)
+#define RCC_CIR_PLLI2SRDYIE ((uint32_t)0x00002000)
+
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000)
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000)
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000)
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000)
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000)
+#define RCC_CIR_PLLI2SRDYC ((uint32_t)0x00200000)
+
+#define RCC_CIR_CSSC ((uint32_t)0x00800000)
+
+/******************** Bit definition for RCC_AHB1RSTR register **************/
+#define RCC_AHB1RSTR_GPIOARST ((uint32_t)0x00000001)
+#define RCC_AHB1RSTR_GPIOBRST ((uint32_t)0x00000002)
+#define RCC_AHB1RSTR_GPIOCRST ((uint32_t)0x00000004)
+#define RCC_AHB1RSTR_GPIODRST ((uint32_t)0x00000008)
+#define RCC_AHB1RSTR_GPIOERST ((uint32_t)0x00000010)
+#define RCC_AHB1RSTR_GPIOHRST ((uint32_t)0x00000080)
+#define RCC_AHB1RSTR_CRCRST ((uint32_t)0x00001000)
+#define RCC_AHB1RSTR_DMA1RST ((uint32_t)0x00200000)
+#define RCC_AHB1RSTR_DMA2RST ((uint32_t)0x00400000)
+
+/******************** Bit definition for RCC_AHB2RSTR register **************/
+#define RCC_AHB2RSTR_OTGFSRST ((uint32_t)0x00000080)
+
+/******************** Bit definition for RCC_AHB3RSTR register **************/
+
+/******************** Bit definition for RCC_APB1RSTR register **************/
+#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001)
+#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002)
+#define RCC_APB1RSTR_TIM4RST ((uint32_t)0x00000004)
+#define RCC_APB1RSTR_TIM5RST ((uint32_t)0x00000008)
+#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800)
+#define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000)
+#define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00008000)
+#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000)
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000)
+#define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000)
+#define RCC_APB1RSTR_I2C3RST ((uint32_t)0x00800000)
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000)
+
+/******************** Bit definition for RCC_APB2RSTR register **************/
+#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000001)
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00000010)
+#define RCC_APB2RSTR_USART6RST ((uint32_t)0x00000020)
+#define RCC_APB2RSTR_ADCRST ((uint32_t)0x00000100)
+#define RCC_APB2RSTR_SDIORST ((uint32_t)0x00000800)
+#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000)
+#define RCC_APB2RSTR_SPI4RST ((uint32_t)0x00002000)
+#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00004000)
+#define RCC_APB2RSTR_TIM9RST ((uint32_t)0x00010000)
+#define RCC_APB2RSTR_TIM10RST ((uint32_t)0x00020000)
+#define RCC_APB2RSTR_TIM11RST ((uint32_t)0x00040000)
+#define RCC_APB2RSTR_SPI5RST ((uint32_t)0x00100000)
+
+/* Old SPI1RST bit definition, maintained for legacy purpose */
+#define RCC_APB2RSTR_SPI1 RCC_APB2RSTR_SPI1RST
+
+/******************** Bit definition for RCC_AHB1ENR register ***************/
+#define RCC_AHB1ENR_GPIOAEN ((uint32_t)0x00000001)
+#define RCC_AHB1ENR_GPIOBEN ((uint32_t)0x00000002)
+#define RCC_AHB1ENR_GPIOCEN ((uint32_t)0x00000004)
+#define RCC_AHB1ENR_GPIODEN ((uint32_t)0x00000008)
+#define RCC_AHB1ENR_GPIOEEN ((uint32_t)0x00000010)
+#define RCC_AHB1ENR_GPIOHEN ((uint32_t)0x00000080)
+#define RCC_AHB1ENR_CRCEN ((uint32_t)0x00001000)
+#define RCC_AHB1ENR_BKPSRAMEN ((uint32_t)0x00040000)
+#define RCC_AHB1ENR_CCMDATARAMEN ((uint32_t)0x00100000)
+#define RCC_AHB1ENR_DMA1EN ((uint32_t)0x00200000)
+#define RCC_AHB1ENR_DMA2EN ((uint32_t)0x00400000)
+
+/******************** Bit definition for RCC_AHB2ENR register ***************/
+#define RCC_AHB2ENR_OTGFSEN ((uint32_t)0x00000080)
+
+/******************** Bit definition for RCC_AHB3ENR register ***************/
+
+/******************** Bit definition for RCC_APB1ENR register ***************/
+#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001)
+#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002)
+#define RCC_APB1ENR_TIM4EN ((uint32_t)0x00000004)
+#define RCC_APB1ENR_TIM5EN ((uint32_t)0x00000008)
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800)
+#define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000)
+#define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000)
+#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000)
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000)
+#define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000)
+#define RCC_APB1ENR_I2C3EN ((uint32_t)0x00800000)
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000)
+
+/******************** Bit definition for RCC_APB2ENR register ***************/
+#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000001)
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00000010)
+#define RCC_APB2ENR_USART6EN ((uint32_t)0x00000020)
+#define RCC_APB2ENR_ADC1EN ((uint32_t)0x00000100)
+#define RCC_APB2ENR_SDIOEN ((uint32_t)0x00000800)
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000)
+#define RCC_APB2ENR_SPI4EN ((uint32_t)0x00002000)
+#define RCC_APB2ENR_SYSCFGEN ((uint32_t)0x00004000)
+#define RCC_APB2ENR_TIM9EN ((uint32_t)0x00010000)
+#define RCC_APB2ENR_TIM10EN ((uint32_t)0x00020000)
+#define RCC_APB2ENR_TIM11EN ((uint32_t)0x00040000)
+#define RCC_APB2ENR_SPI5EN ((uint32_t)0x00100000)
+
+/******************** Bit definition for RCC_AHB1LPENR register *************/
+#define RCC_AHB1LPENR_GPIOALPEN ((uint32_t)0x00000001)
+#define RCC_AHB1LPENR_GPIOBLPEN ((uint32_t)0x00000002)
+#define RCC_AHB1LPENR_GPIOCLPEN ((uint32_t)0x00000004)
+#define RCC_AHB1LPENR_GPIODLPEN ((uint32_t)0x00000008)
+#define RCC_AHB1LPENR_GPIOELPEN ((uint32_t)0x00000010)
+#define RCC_AHB1LPENR_GPIOHLPEN ((uint32_t)0x00000080)
+#define RCC_AHB1LPENR_CRCLPEN ((uint32_t)0x00001000)
+#define RCC_AHB1LPENR_FLITFLPEN ((uint32_t)0x00008000)
+#define RCC_AHB1LPENR_SRAM1LPEN ((uint32_t)0x00010000)
+#define RCC_AHB1LPENR_SRAM2LPEN ((uint32_t)0x00020000)
+#define RCC_AHB1LPENR_BKPSRAMLPEN ((uint32_t)0x00040000)
+#define RCC_AHB1LPENR_SRAM3LPEN ((uint32_t)0x00080000)
+#define RCC_AHB1LPENR_DMA1LPEN ((uint32_t)0x00200000)
+#define RCC_AHB1LPENR_DMA2LPEN ((uint32_t)0x00400000)
+
+/******************** Bit definition for RCC_AHB2LPENR register *************/
+#define RCC_AHB2LPENR_OTGFSLPEN ((uint32_t)0x00000080)
+
+/******************** Bit definition for RCC_AHB3LPENR register *************/
+
+/******************** Bit definition for RCC_APB1LPENR register *************/
+#define RCC_APB1LPENR_TIM2LPEN ((uint32_t)0x00000001)
+#define RCC_APB1LPENR_TIM3LPEN ((uint32_t)0x00000002)
+#define RCC_APB1LPENR_TIM4LPEN ((uint32_t)0x00000004)
+#define RCC_APB1LPENR_TIM5LPEN ((uint32_t)0x00000008)
+#define RCC_APB1LPENR_WWDGLPEN ((uint32_t)0x00000800)
+#define RCC_APB1LPENR_SPI2LPEN ((uint32_t)0x00004000)
+#define RCC_APB1LPENR_SPI3LPEN ((uint32_t)0x00008000)
+#define RCC_APB1LPENR_USART2LPEN ((uint32_t)0x00020000)
+#define RCC_APB1LPENR_I2C1LPEN ((uint32_t)0x00200000)
+#define RCC_APB1LPENR_I2C2LPEN ((uint32_t)0x00400000)
+#define RCC_APB1LPENR_I2C3LPEN ((uint32_t)0x00800000)
+#define RCC_APB1LPENR_PWRLPEN ((uint32_t)0x10000000)
+#define RCC_APB1LPENR_DACLPEN ((uint32_t)0x20000000)
+
+/******************** Bit definition for RCC_APB2LPENR register *************/
+#define RCC_APB2LPENR_TIM1LPEN ((uint32_t)0x00000001)
+#define RCC_APB2LPENR_USART1LPEN ((uint32_t)0x00000010)
+#define RCC_APB2LPENR_USART6LPEN ((uint32_t)0x00000020)
+#define RCC_APB2LPENR_ADC1LPEN ((uint32_t)0x00000100)
+#define RCC_APB2LPENR_SDIOLPEN ((uint32_t)0x00000800)
+#define RCC_APB2LPENR_SPI1LPEN ((uint32_t)0x00001000)
+#define RCC_APB2LPENR_SPI4LPEN ((uint32_t)0x00002000)
+#define RCC_APB2LPENR_SYSCFGLPEN ((uint32_t)0x00004000)
+#define RCC_APB2LPENR_TIM9LPEN ((uint32_t)0x00010000)
+#define RCC_APB2LPENR_TIM10LPEN ((uint32_t)0x00020000)
+#define RCC_APB2LPENR_TIM11LPEN ((uint32_t)0x00040000)
+#define RCC_APB2LPENR_SPI5LPEN ((uint32_t)0x00100000)
+
+/******************** Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSEON ((uint32_t)0x00000001)
+#define RCC_BDCR_LSERDY ((uint32_t)0x00000002)
+#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004)
+#define RCC_BDCR_LSEMOD ((uint32_t)0x00000008)
+
+#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300)
+#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100)
+#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200)
+
+#define RCC_BDCR_RTCEN ((uint32_t)0x00008000)
+#define RCC_BDCR_BDRST ((uint32_t)0x00010000)
+
+/******************** Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001)
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002)
+#define RCC_CSR_RMVF ((uint32_t)0x01000000)
+#define RCC_CSR_BORRSTF ((uint32_t)0x02000000)
+#define RCC_CSR_PADRSTF ((uint32_t)0x04000000)
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000)
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000)
+#define RCC_CSR_WDGRSTF ((uint32_t)0x20000000)
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000)
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000)
+
+/******************** Bit definition for RCC_SSCGR register *****************/
+#define RCC_SSCGR_MODPER ((uint32_t)0x00001FFF)
+#define RCC_SSCGR_INCSTEP ((uint32_t)0x0FFFE000)
+#define RCC_SSCGR_SPREADSEL ((uint32_t)0x40000000)
+#define RCC_SSCGR_SSCGEN ((uint32_t)0x80000000)
+
+/******************** Bit definition for RCC_PLLI2SCFGR register ************/
+#define RCC_PLLI2SCFGR_PLLI2SM ((uint32_t)0x0000003F)
+#define RCC_PLLI2SCFGR_PLLI2SM_0 ((uint32_t)0x00000001)
+#define RCC_PLLI2SCFGR_PLLI2SM_1 ((uint32_t)0x00000002)
+#define RCC_PLLI2SCFGR_PLLI2SM_2 ((uint32_t)0x00000004)
+#define RCC_PLLI2SCFGR_PLLI2SM_3 ((uint32_t)0x00000008)
+#define RCC_PLLI2SCFGR_PLLI2SM_4 ((uint32_t)0x00000010)
+#define RCC_PLLI2SCFGR_PLLI2SM_5 ((uint32_t)0x00000020)
+
+#define RCC_PLLI2SCFGR_PLLI2SN ((uint32_t)0x00007FC0)
+#define RCC_PLLI2SCFGR_PLLI2SN_0 ((uint32_t)0x00000040)
+#define RCC_PLLI2SCFGR_PLLI2SN_1 ((uint32_t)0x00000080)
+#define RCC_PLLI2SCFGR_PLLI2SN_2 ((uint32_t)0x00000100)
+#define RCC_PLLI2SCFGR_PLLI2SN_3 ((uint32_t)0x00000200)
+#define RCC_PLLI2SCFGR_PLLI2SN_4 ((uint32_t)0x00000400)
+#define RCC_PLLI2SCFGR_PLLI2SN_5 ((uint32_t)0x00000800)
+#define RCC_PLLI2SCFGR_PLLI2SN_6 ((uint32_t)0x00001000)
+#define RCC_PLLI2SCFGR_PLLI2SN_7 ((uint32_t)0x00002000)
+#define RCC_PLLI2SCFGR_PLLI2SN_8 ((uint32_t)0x00004000)
+
+#define RCC_PLLI2SCFGR_PLLI2SR ((uint32_t)0x70000000)
+#define RCC_PLLI2SCFGR_PLLI2SR_0 ((uint32_t)0x10000000)
+#define RCC_PLLI2SCFGR_PLLI2SR_1 ((uint32_t)0x20000000)
+#define RCC_PLLI2SCFGR_PLLI2SR_2 ((uint32_t)0x40000000)
+
+
+/******************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for RTC_TR register *******************/
+#define RTC_TR_PM ((uint32_t)0x00400000)
+#define RTC_TR_HT ((uint32_t)0x00300000)
+#define RTC_TR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TR_HU ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TR_MNT ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TR_MNU ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TR_ST ((uint32_t)0x00000070)
+#define RTC_TR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TR_SU ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_DR register *******************/
+#define RTC_DR_YT ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0 ((uint32_t)0x00100000)
+#define RTC_DR_YT_1 ((uint32_t)0x00200000)
+#define RTC_DR_YT_2 ((uint32_t)0x00400000)
+#define RTC_DR_YT_3 ((uint32_t)0x00800000)
+#define RTC_DR_YU ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0 ((uint32_t)0x00010000)
+#define RTC_DR_YU_1 ((uint32_t)0x00020000)
+#define RTC_DR_YU_2 ((uint32_t)0x00040000)
+#define RTC_DR_YU_3 ((uint32_t)0x00080000)
+#define RTC_DR_WDU ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_DR_MT ((uint32_t)0x00001000)
+#define RTC_DR_MU ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0 ((uint32_t)0x00000100)
+#define RTC_DR_MU_1 ((uint32_t)0x00000200)
+#define RTC_DR_MU_2 ((uint32_t)0x00000400)
+#define RTC_DR_MU_3 ((uint32_t)0x00000800)
+#define RTC_DR_DT ((uint32_t)0x00000030)
+#define RTC_DR_DT_0 ((uint32_t)0x00000010)
+#define RTC_DR_DT_1 ((uint32_t)0x00000020)
+#define RTC_DR_DU ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0 ((uint32_t)0x00000001)
+#define RTC_DR_DU_1 ((uint32_t)0x00000002)
+#define RTC_DR_DU_2 ((uint32_t)0x00000004)
+#define RTC_DR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_CR register *******************/
+#define RTC_CR_COE ((uint32_t)0x00800000)
+#define RTC_CR_OSEL ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
+#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_COSEL ((uint32_t)0x00080000)
+#define RTC_CR_BCK ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H ((uint32_t)0x00010000)
+#define RTC_CR_TSIE ((uint32_t)0x00008000)
+#define RTC_CR_WUTIE ((uint32_t)0x00004000)
+#define RTC_CR_ALRBIE ((uint32_t)0x00002000)
+#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
+#define RTC_CR_TSE ((uint32_t)0x00000800)
+#define RTC_CR_WUTE ((uint32_t)0x00000400)
+#define RTC_CR_ALRBE ((uint32_t)0x00000200)
+#define RTC_CR_ALRAE ((uint32_t)0x00000100)
+#define RTC_CR_DCE ((uint32_t)0x00000080)
+#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
+#define RTC_CR_WUCKSEL ((uint32_t)0x00000007)
+#define RTC_CR_WUCKSEL_0 ((uint32_t)0x00000001)
+#define RTC_CR_WUCKSEL_1 ((uint32_t)0x00000002)
+#define RTC_CR_WUCKSEL_2 ((uint32_t)0x00000004)
+
+/******************** Bits definition for RTC_ISR register ******************/
+#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
+#define RTC_ISR_TAMP2F ((uint32_t)0x00004000)
+#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
+#define RTC_ISR_TSF ((uint32_t)0x00000800)
+#define RTC_ISR_WUTF ((uint32_t)0x00000400)
+#define RTC_ISR_ALRBF ((uint32_t)0x00000200)
+#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
+#define RTC_ISR_INIT ((uint32_t)0x00000080)
+#define RTC_ISR_INITF ((uint32_t)0x00000040)
+#define RTC_ISR_RSF ((uint32_t)0x00000020)
+#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF ((uint32_t)0x00000008)
+#define RTC_ISR_WUTWF ((uint32_t)0x00000004)
+#define RTC_ISR_ALRBWF ((uint32_t)0x00000002)
+#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_PRER register *****************/
+#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00001FFF)
+
+/******************** Bits definition for RTC_WUTR register *****************/
+#define RTC_WUTR_WUT ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CALIBR register ***************/
+#define RTC_CALIBR_DCS ((uint32_t)0x00000080)
+#define RTC_CALIBR_DC ((uint32_t)0x0000001F)
+
+/******************** Bits definition for RTC_ALRMAR register ***************/
+#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_ALRMBR register ***************/
+#define RTC_ALRMBR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMBR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMBR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMBR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMBR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMBR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMBR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMBR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMBR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMBR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMBR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMBR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMBR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMBR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMBR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMBR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMBR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMBR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMBR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMBR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMBR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMBR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMBR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMBR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMBR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMBR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMBR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMBR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMBR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMBR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMBR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMBR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMBR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMBR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMBR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMBR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMBR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMBR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMBR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMBR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_WPR register ******************/
+#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+
+/******************** Bits definition for RTC_SSR register ******************/
+#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_SHIFTR register ***************/
+#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
+
+/******************** Bits definition for RTC_TSTR register *****************/
+#define RTC_TSTR_PM ((uint32_t)0x00400000)
+#define RTC_TSTR_HT ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TSTR_HU ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TSTR_ST ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TSTR_SU ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSDR register *****************/
+#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_TSDR_MT ((uint32_t)0x00001000)
+#define RTC_TSDR_MU ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
+#define RTC_TSDR_DT ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
+#define RTC_TSDR_DU ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSSSR register ****************/
+#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CAL register *****************/
+#define RTC_CALR_CALP ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
+#define RTC_CALR_CALM ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
+
+/******************** Bits definition for RTC_TAFCR register ****************/
+#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TSINSEL ((uint32_t)0x00020000)
+#define RTC_TAFCR_TAMPINSEL ((uint32_t)0x00010000)
+#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010)
+#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008)
+#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_ALRMASSR register *************/
+#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_ALRMBSSR register *************/
+#define RTC_ALRMBSSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMBSSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMBSSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMBSSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMBSSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMBSSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_BKP0R register ****************/
+#define RTC_BKP0R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP1R register ****************/
+#define RTC_BKP1R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP2R register ****************/
+#define RTC_BKP2R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP3R register ****************/
+#define RTC_BKP3R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP4R register ****************/
+#define RTC_BKP4R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP5R register ****************/
+#define RTC_BKP5R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP6R register ****************/
+#define RTC_BKP6R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP7R register ****************/
+#define RTC_BKP7R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP8R register ****************/
+#define RTC_BKP8R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP9R register ****************/
+#define RTC_BKP9R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP10R register ***************/
+#define RTC_BKP10R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP11R register ***************/
+#define RTC_BKP11R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP12R register ***************/
+#define RTC_BKP12R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP13R register ***************/
+#define RTC_BKP13R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP14R register ***************/
+#define RTC_BKP14R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP15R register ***************/
+#define RTC_BKP15R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP16R register ***************/
+#define RTC_BKP16R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP17R register ***************/
+#define RTC_BKP17R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP18R register ***************/
+#define RTC_BKP18R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP19R register ***************/
+#define RTC_BKP19R ((uint32_t)0xFFFFFFFF)
+
+
+
+/******************************************************************************/
+/* */
+/* SD host Interface */
+/* */
+/******************************************************************************/
+/****************** Bit definition for SDIO_POWER register ******************/
+#define SDIO_POWER_PWRCTRL ((uint32_t)0x03) /*!<PWRCTRL[1:0] bits (Power supply control bits) */
+#define SDIO_POWER_PWRCTRL_0 ((uint32_t)0x01) /*!<Bit 0 */
+#define SDIO_POWER_PWRCTRL_1 ((uint32_t)0x02) /*!<Bit 1 */
+
+/****************** Bit definition for SDIO_CLKCR register ******************/
+#define SDIO_CLKCR_CLKDIV ((uint32_t)0x00FF) /*!<Clock divide factor */
+#define SDIO_CLKCR_CLKEN ((uint32_t)0x0100) /*!<Clock enable bit */
+#define SDIO_CLKCR_PWRSAV ((uint32_t)0x0200) /*!<Power saving configuration bit */
+#define SDIO_CLKCR_BYPASS ((uint32_t)0x0400) /*!<Clock divider bypass enable bit */
+
+#define SDIO_CLKCR_WIDBUS ((uint32_t)0x1800) /*!<WIDBUS[1:0] bits (Wide bus mode enable bit) */
+#define SDIO_CLKCR_WIDBUS_0 ((uint32_t)0x0800) /*!<Bit 0 */
+#define SDIO_CLKCR_WIDBUS_1 ((uint32_t)0x1000) /*!<Bit 1 */
+
+#define SDIO_CLKCR_NEGEDGE ((uint32_t)0x2000) /*!<SDIO_CK dephasing selection bit */
+#define SDIO_CLKCR_HWFC_EN ((uint32_t)0x4000) /*!<HW Flow Control enable */
+
+/******************* Bit definition for SDIO_ARG register *******************/
+#define SDIO_ARG_CMDARG ((uint32_t)0xFFFFFFFF) /*!<Command argument */
+
+/******************* Bit definition for SDIO_CMD register *******************/
+#define SDIO_CMD_CMDINDEX ((uint32_t)0x003F) /*!<Command Index */
+
+#define SDIO_CMD_WAITRESP ((uint32_t)0x00C0) /*!<WAITRESP[1:0] bits (Wait for response bits) */
+#define SDIO_CMD_WAITRESP_0 ((uint32_t)0x0040) /*!< Bit 0 */
+#define SDIO_CMD_WAITRESP_1 ((uint32_t)0x0080) /*!< Bit 1 */
+
+#define SDIO_CMD_WAITINT ((uint32_t)0x0100) /*!<CPSM Waits for Interrupt Request */
+#define SDIO_CMD_WAITPEND ((uint32_t)0x0200) /*!<CPSM Waits for ends of data transfer (CmdPend internal signal) */
+#define SDIO_CMD_CPSMEN ((uint32_t)0x0400) /*!<Command path state machine (CPSM) Enable bit */
+#define SDIO_CMD_SDIOSUSPEND ((uint32_t)0x0800) /*!<SD I/O suspend command */
+#define SDIO_CMD_ENCMDCOMPL ((uint32_t)0x1000) /*!<Enable CMD completion */
+#define SDIO_CMD_NIEN ((uint32_t)0x2000) /*!<Not Interrupt Enable */
+#define SDIO_CMD_CEATACMD ((uint32_t)0x4000) /*!<CE-ATA command */
+
+/***************** Bit definition for SDIO_RESPCMD register *****************/
+#define SDIO_RESPCMD_RESPCMD ((uint32_t)0x3F) /*!<Response command index */
+
+/****************** Bit definition for SDIO_RESP0 register ******************/
+#define SDIO_RESP0_CARDSTATUS0 ((uint32_t)0xFFFFFFFF) /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP1 register ******************/
+#define SDIO_RESP1_CARDSTATUS1 ((uint32_t)0xFFFFFFFF) /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP2 register ******************/
+#define SDIO_RESP2_CARDSTATUS2 ((uint32_t)0xFFFFFFFF) /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP3 register ******************/
+#define SDIO_RESP3_CARDSTATUS3 ((uint32_t)0xFFFFFFFF) /*!<Card Status */
+
+/****************** Bit definition for SDIO_RESP4 register ******************/
+#define SDIO_RESP4_CARDSTATUS4 ((uint32_t)0xFFFFFFFF) /*!<Card Status */
+
+/****************** Bit definition for SDIO_DTIMER register *****************/
+#define SDIO_DTIMER_DATATIME ((uint32_t)0xFFFFFFFF) /*!<Data timeout period. */
+
+/****************** Bit definition for SDIO_DLEN register *******************/
+#define SDIO_DLEN_DATALENGTH ((uint32_t)0x01FFFFFF) /*!<Data length value */
+
+/****************** Bit definition for SDIO_DCTRL register ******************/
+#define SDIO_DCTRL_DTEN ((uint32_t)0x0001) /*!<Data transfer enabled bit */
+#define SDIO_DCTRL_DTDIR ((uint32_t)0x0002) /*!<Data transfer direction selection */
+#define SDIO_DCTRL_DTMODE ((uint32_t)0x0004) /*!<Data transfer mode selection */
+#define SDIO_DCTRL_DMAEN ((uint32_t)0x0008) /*!<DMA enabled bit */
+
+#define SDIO_DCTRL_DBLOCKSIZE ((uint32_t)0x00F0) /*!<DBLOCKSIZE[3:0] bits (Data block size) */
+#define SDIO_DCTRL_DBLOCKSIZE_0 ((uint32_t)0x0010) /*!<Bit 0 */
+#define SDIO_DCTRL_DBLOCKSIZE_1 ((uint32_t)0x0020) /*!<Bit 1 */
+#define SDIO_DCTRL_DBLOCKSIZE_2 ((uint32_t)0x0040) /*!<Bit 2 */
+#define SDIO_DCTRL_DBLOCKSIZE_3 ((uint32_t)0x0080) /*!<Bit 3 */
+
+#define SDIO_DCTRL_RWSTART ((uint32_t)0x0100) /*!<Read wait start */
+#define SDIO_DCTRL_RWSTOP ((uint32_t)0x0200) /*!<Read wait stop */
+#define SDIO_DCTRL_RWMOD ((uint32_t)0x0400) /*!<Read wait mode */
+#define SDIO_DCTRL_SDIOEN ((uint32_t)0x0800) /*!<SD I/O enable functions */
+
+/****************** Bit definition for SDIO_DCOUNT register *****************/
+#define SDIO_DCOUNT_DATACOUNT ((uint32_t)0x01FFFFFF) /*!<Data count value */
+
+/****************** Bit definition for SDIO_STA register ********************/
+#define SDIO_STA_CCRCFAIL ((uint32_t)0x00000001) /*!<Command response received (CRC check failed) */
+#define SDIO_STA_DCRCFAIL ((uint32_t)0x00000002) /*!<Data block sent/received (CRC check failed) */
+#define SDIO_STA_CTIMEOUT ((uint32_t)0x00000004) /*!<Command response timeout */
+#define SDIO_STA_DTIMEOUT ((uint32_t)0x00000008) /*!<Data timeout */
+#define SDIO_STA_TXUNDERR ((uint32_t)0x00000010) /*!<Transmit FIFO underrun error */
+#define SDIO_STA_RXOVERR ((uint32_t)0x00000020) /*!<Received FIFO overrun error */
+#define SDIO_STA_CMDREND ((uint32_t)0x00000040) /*!<Command response received (CRC check passed) */
+#define SDIO_STA_CMDSENT ((uint32_t)0x00000080) /*!<Command sent (no response required) */
+#define SDIO_STA_DATAEND ((uint32_t)0x00000100) /*!<Data end (data counter, SDIDCOUNT, is zero) */
+#define SDIO_STA_STBITERR ((uint32_t)0x00000200) /*!<Start bit not detected on all data signals in wide bus mode */
+#define SDIO_STA_DBCKEND ((uint32_t)0x00000400) /*!<Data block sent/received (CRC check passed) */
+#define SDIO_STA_CMDACT ((uint32_t)0x00000800) /*!<Command transfer in progress */
+#define SDIO_STA_TXACT ((uint32_t)0x00001000) /*!<Data transmit in progress */
+#define SDIO_STA_RXACT ((uint32_t)0x00002000) /*!<Data receive in progress */
+#define SDIO_STA_TXFIFOHE ((uint32_t)0x00004000) /*!<Transmit FIFO Half Empty: at least 8 words can be written into the FIFO */
+#define SDIO_STA_RXFIFOHF ((uint32_t)0x00008000) /*!<Receive FIFO Half Full: there are at least 8 words in the FIFO */
+#define SDIO_STA_TXFIFOF ((uint32_t)0x00010000) /*!<Transmit FIFO full */
+#define SDIO_STA_RXFIFOF ((uint32_t)0x00020000) /*!<Receive FIFO full */
+#define SDIO_STA_TXFIFOE ((uint32_t)0x00040000) /*!<Transmit FIFO empty */
+#define SDIO_STA_RXFIFOE ((uint32_t)0x00080000) /*!<Receive FIFO empty */
+#define SDIO_STA_TXDAVL ((uint32_t)0x00100000) /*!<Data available in transmit FIFO */
+#define SDIO_STA_RXDAVL ((uint32_t)0x00200000) /*!<Data available in receive FIFO */
+#define SDIO_STA_SDIOIT ((uint32_t)0x00400000) /*!<SDIO interrupt received */
+#define SDIO_STA_CEATAEND ((uint32_t)0x00800000) /*!<CE-ATA command completion signal received for CMD61 */
+
+/******************* Bit definition for SDIO_ICR register *******************/
+#define SDIO_ICR_CCRCFAILC ((uint32_t)0x00000001) /*!<CCRCFAIL flag clear bit */
+#define SDIO_ICR_DCRCFAILC ((uint32_t)0x00000002) /*!<DCRCFAIL flag clear bit */
+#define SDIO_ICR_CTIMEOUTC ((uint32_t)0x00000004) /*!<CTIMEOUT flag clear bit */
+#define SDIO_ICR_DTIMEOUTC ((uint32_t)0x00000008) /*!<DTIMEOUT flag clear bit */
+#define SDIO_ICR_TXUNDERRC ((uint32_t)0x00000010) /*!<TXUNDERR flag clear bit */
+#define SDIO_ICR_RXOVERRC ((uint32_t)0x00000020) /*!<RXOVERR flag clear bit */
+#define SDIO_ICR_CMDRENDC ((uint32_t)0x00000040) /*!<CMDREND flag clear bit */
+#define SDIO_ICR_CMDSENTC ((uint32_t)0x00000080) /*!<CMDSENT flag clear bit */
+#define SDIO_ICR_DATAENDC ((uint32_t)0x00000100) /*!<DATAEND flag clear bit */
+#define SDIO_ICR_STBITERRC ((uint32_t)0x00000200) /*!<STBITERR flag clear bit */
+#define SDIO_ICR_DBCKENDC ((uint32_t)0x00000400) /*!<DBCKEND flag clear bit */
+#define SDIO_ICR_SDIOITC ((uint32_t)0x00400000) /*!<SDIOIT flag clear bit */
+#define SDIO_ICR_CEATAENDC ((uint32_t)0x00800000) /*!<CEATAEND flag clear bit */
+
+/****************** Bit definition for SDIO_MASK register *******************/
+#define SDIO_MASK_CCRCFAILIE ((uint32_t)0x00000001) /*!<Command CRC Fail Interrupt Enable */
+#define SDIO_MASK_DCRCFAILIE ((uint32_t)0x00000002) /*!<Data CRC Fail Interrupt Enable */
+#define SDIO_MASK_CTIMEOUTIE ((uint32_t)0x00000004) /*!<Command TimeOut Interrupt Enable */
+#define SDIO_MASK_DTIMEOUTIE ((uint32_t)0x00000008) /*!<Data TimeOut Interrupt Enable */
+#define SDIO_MASK_TXUNDERRIE ((uint32_t)0x00000010) /*!<Tx FIFO UnderRun Error Interrupt Enable */
+#define SDIO_MASK_RXOVERRIE ((uint32_t)0x00000020) /*!<Rx FIFO OverRun Error Interrupt Enable */
+#define SDIO_MASK_CMDRENDIE ((uint32_t)0x00000040) /*!<Command Response Received Interrupt Enable */
+#define SDIO_MASK_CMDSENTIE ((uint32_t)0x00000080) /*!<Command Sent Interrupt Enable */
+#define SDIO_MASK_DATAENDIE ((uint32_t)0x00000100) /*!<Data End Interrupt Enable */
+#define SDIO_MASK_STBITERRIE ((uint32_t)0x00000200) /*!<Start Bit Error Interrupt Enable */
+#define SDIO_MASK_DBCKENDIE ((uint32_t)0x00000400) /*!<Data Block End Interrupt Enable */
+#define SDIO_MASK_CMDACTIE ((uint32_t)0x00000800) /*!<CCommand Acting Interrupt Enable */
+#define SDIO_MASK_TXACTIE ((uint32_t)0x00001000) /*!<Data Transmit Acting Interrupt Enable */
+#define SDIO_MASK_RXACTIE ((uint32_t)0x00002000) /*!<Data receive acting interrupt enabled */
+#define SDIO_MASK_TXFIFOHEIE ((uint32_t)0x00004000) /*!<Tx FIFO Half Empty interrupt Enable */
+#define SDIO_MASK_RXFIFOHFIE ((uint32_t)0x00008000) /*!<Rx FIFO Half Full interrupt Enable */
+#define SDIO_MASK_TXFIFOFIE ((uint32_t)0x00010000) /*!<Tx FIFO Full interrupt Enable */
+#define SDIO_MASK_RXFIFOFIE ((uint32_t)0x00020000) /*!<Rx FIFO Full interrupt Enable */
+#define SDIO_MASK_TXFIFOEIE ((uint32_t)0x00040000) /*!<Tx FIFO Empty interrupt Enable */
+#define SDIO_MASK_RXFIFOEIE ((uint32_t)0x00080000) /*!<Rx FIFO Empty interrupt Enable */
+#define SDIO_MASK_TXDAVLIE ((uint32_t)0x00100000) /*!<Data available in Tx FIFO interrupt Enable */
+#define SDIO_MASK_RXDAVLIE ((uint32_t)0x00200000) /*!<Data available in Rx FIFO interrupt Enable */
+#define SDIO_MASK_SDIOITIE ((uint32_t)0x00400000) /*!<SDIO Mode Interrupt Received interrupt Enable */
+#define SDIO_MASK_CEATAENDIE ((uint32_t)0x00800000) /*!<CE-ATA command completion signal received Interrupt Enable */
+
+/***************** Bit definition for SDIO_FIFOCNT register *****************/
+#define SDIO_FIFOCNT_FIFOCOUNT ((uint32_t)0x00FFFFFF) /*!<Remaining number of words to be written to or read from the FIFO */
+
+/****************** Bit definition for SDIO_FIFO register *******************/
+#define SDIO_FIFO_FIFODATA ((uint32_t)0xFFFFFFFF) /*!<Receive and transmit FIFO data */
+
+/******************************************************************************/
+/* */
+/* Serial Peripheral Interface */
+/* */
+/******************************************************************************/
+/******************* Bit definition for SPI_CR1 register ********************/
+#define SPI_CR1_CPHA ((uint32_t)0x00000001) /*!<Clock Phase */
+#define SPI_CR1_CPOL ((uint32_t)0x00000002) /*!<Clock Polarity */
+#define SPI_CR1_MSTR ((uint32_t)0x00000004) /*!<Master Selection */
+
+#define SPI_CR1_BR ((uint32_t)0x00000038) /*!<BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define SPI_CR1_BR_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define SPI_CR1_BR_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+
+#define SPI_CR1_SPE ((uint32_t)0x00000040) /*!<SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint32_t)0x00000080) /*!<Frame Format */
+#define SPI_CR1_SSI ((uint32_t)0x00000100) /*!<Internal slave select */
+#define SPI_CR1_SSM ((uint32_t)0x00000200) /*!<Software slave management */
+#define SPI_CR1_RXONLY ((uint32_t)0x00000400) /*!<Receive only */
+#define SPI_CR1_DFF ((uint32_t)0x00000800) /*!<Data Frame Format */
+#define SPI_CR1_CRCNEXT ((uint32_t)0x00001000) /*!<Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint32_t)0x00002000) /*!<Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint32_t)0x00004000) /*!<Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint32_t)0x00008000) /*!<Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register ********************/
+#define SPI_CR2_RXDMAEN ((uint32_t)0x00000001) /*!<Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint32_t)0x00000002) /*!<Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint32_t)0x00000004) /*!<SS Output Enable */
+#define SPI_CR2_FRF ((uint32_t)0x00000010) /*!<Frame Format */
+#define SPI_CR2_ERRIE ((uint32_t)0x00000020) /*!<Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint32_t)0x00000040) /*!<RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint32_t)0x00000080) /*!<Tx buffer Empty Interrupt Enable */
+
+/******************** Bit definition for SPI_SR register ********************/
+#define SPI_SR_RXNE ((uint32_t)0x00000001) /*!<Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint32_t)0x00000002) /*!<Transmit buffer Empty */
+#define SPI_SR_CHSIDE ((uint32_t)0x00000004) /*!<Channel side */
+#define SPI_SR_UDR ((uint32_t)0x00000008) /*!<Underrun flag */
+#define SPI_SR_CRCERR ((uint32_t)0x00000010) /*!<CRC Error flag */
+#define SPI_SR_MODF ((uint32_t)0x00000020) /*!<Mode fault */
+#define SPI_SR_OVR ((uint32_t)0x00000040) /*!<Overrun flag */
+#define SPI_SR_BSY ((uint32_t)0x00000080) /*!<Busy flag */
+#define SPI_SR_FRE ((uint32_t)0x00000100) /*!<Frame format error flag */
+
+/******************** Bit definition for SPI_DR register ********************/
+#define SPI_DR_DR ((uint32_t)0x0000FFFF) /*!<Data Register */
+
+/******************* Bit definition for SPI_CRCPR register ******************/
+#define SPI_CRCPR_CRCPOLY ((uint32_t)0x0000FFFF) /*!<CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register ******************/
+#define SPI_RXCRCR_RXCRC ((uint32_t)0x0000FFFF) /*!<Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register ******************/
+#define SPI_TXCRCR_TXCRC ((uint32_t)0x0000FFFF) /*!<Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register *****************/
+#define SPI_I2SCFGR_CHLEN ((uint32_t)0x00000001) /*!<Channel length (number of bits per audio channel) */
+
+#define SPI_I2SCFGR_DATLEN ((uint32_t)0x00000006) /*!<DATLEN[1:0] bits (Data length to be transferred) */
+#define SPI_I2SCFGR_DATLEN_0 ((uint32_t)0x00000002) /*!<Bit 0 */
+#define SPI_I2SCFGR_DATLEN_1 ((uint32_t)0x00000004) /*!<Bit 1 */
+
+#define SPI_I2SCFGR_CKPOL ((uint32_t)0x00000008) /*!<steady state clock polarity */
+
+#define SPI_I2SCFGR_I2SSTD ((uint32_t)0x00000030) /*!<I2SSTD[1:0] bits (I2S standard selection) */
+#define SPI_I2SCFGR_I2SSTD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SSTD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define SPI_I2SCFGR_PCMSYNC ((uint32_t)0x00000080) /*!<PCM frame synchronization */
+
+#define SPI_I2SCFGR_I2SCFG ((uint32_t)0x00000300) /*!<I2SCFG[1:0] bits (I2S configuration mode) */
+#define SPI_I2SCFGR_I2SCFG_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SCFG_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define SPI_I2SCFGR_I2SE ((uint32_t)0x00000400) /*!<I2S Enable */
+#define SPI_I2SCFGR_I2SMOD ((uint32_t)0x00000800) /*!<I2S mode selection */
+
+/****************** Bit definition for SPI_I2SPR register *******************/
+#define SPI_I2SPR_I2SDIV ((uint32_t)0x000000FF) /*!<I2S Linear prescaler */
+#define SPI_I2SPR_ODD ((uint32_t)0x00000100) /*!<Odd factor for the prescaler */
+#define SPI_I2SPR_MCKOE ((uint32_t)0x00000200) /*!<Master Clock Output Enable */
+
+/******************************************************************************/
+/* */
+/* SYSCFG */
+/* */
+/******************************************************************************/
+/****************** Bit definition for SYSCFG_MEMRMP register ***************/
+#define SYSCFG_MEMRMP_MEM_MODE ((uint32_t)0x00000007) /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_MEMRMP_MEM_MODE_0 ((uint32_t)0x00000001)
+#define SYSCFG_MEMRMP_MEM_MODE_1 ((uint32_t)0x00000002)
+#define SYSCFG_MEMRMP_MEM_MODE_2 ((uint32_t)0x00000004)
+
+/****************** Bit definition for SYSCFG_PMC register ******************/
+#define SYSCFG_PMC_ADC1DC2 ((uint32_t)0x00010000) /*!< Refer to AN4073 on how to use this bit */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register ***************/
+#define SYSCFG_EXTICR1_EXTI0 ((uint32_t)0x000F) /*!<EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 ((uint32_t)0x00F0) /*!<EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 ((uint32_t)0x0F00) /*!<EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 ((uint32_t)0xF000) /*!<EXTI 3 configuration */
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA ((uint32_t)0x0000) /*!<PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB ((uint32_t)0x0001) /*!<PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC ((uint32_t)0x0002) /*!<PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD ((uint32_t)0x0003) /*!<PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PE ((uint32_t)0x0004) /*!<PE[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PH ((uint32_t)0x0007) /*!<PH[0] pin */
+
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA ((uint32_t)0x0000) /*!<PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB ((uint32_t)0x0010) /*!<PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC ((uint32_t)0x0020) /*!<PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD ((uint32_t)0x0030) /*!<PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PE ((uint32_t)0x0040) /*!<PE[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PH ((uint32_t)0x0070) /*!<PH[1] pin */
+
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA ((uint32_t)0x0000) /*!<PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB ((uint32_t)0x0100) /*!<PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC ((uint32_t)0x0200) /*!<PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD ((uint32_t)0x0300) /*!<PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PE ((uint32_t)0x0400) /*!<PE[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PH ((uint32_t)0x0700) /*!<PH[2] pin */
+
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA ((uint32_t)0x0000) /*!<PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB ((uint32_t)0x1000) /*!<PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC ((uint32_t)0x2000) /*!<PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD ((uint32_t)0x3000) /*!<PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PE ((uint32_t)0x4000) /*!<PE[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PH ((uint32_t)0x7000) /*!<PH[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register ***************/
+#define SYSCFG_EXTICR2_EXTI4 ((uint32_t)0x000F) /*!<EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 ((uint32_t)0x00F0) /*!<EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 ((uint32_t)0x0F00) /*!<EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 ((uint32_t)0xF000) /*!<EXTI 7 configuration */
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA ((uint32_t)0x0000) /*!<PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB ((uint32_t)0x0001) /*!<PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC ((uint32_t)0x0002) /*!<PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD ((uint32_t)0x0003) /*!<PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PE ((uint32_t)0x0004) /*!<PE[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PH ((uint32_t)0x0007) /*!<PH[4] pin */
+
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA ((uint32_t)0x0000) /*!<PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB ((uint32_t)0x0010) /*!<PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC ((uint32_t)0x0020) /*!<PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD ((uint32_t)0x0030) /*!<PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PE ((uint32_t)0x0040) /*!<PE[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PH ((uint32_t)0x0070) /*!<PH[5] pin */
+
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA ((uint32_t)0x0000) /*!<PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB ((uint32_t)0x0100) /*!<PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC ((uint32_t)0x0200) /*!<PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD ((uint32_t)0x0300) /*!<PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PE ((uint32_t)0x0400) /*!<PE[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PH ((uint32_t)0x0700) /*!<PH[6] pin */
+
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA ((uint32_t)0x0000) /*!<PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB ((uint32_t)0x1000) /*!<PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC ((uint32_t)0x2000) /*!<PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD ((uint32_t)0x3000) /*!<PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PE ((uint32_t)0x4000) /*!<PE[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PH ((uint32_t)0x7000) /*!<PH[7] pin */
+
+
+/***************** Bit definition for SYSCFG_EXTICR3 register ***************/
+#define SYSCFG_EXTICR3_EXTI8 ((uint32_t)0x000F) /*!<EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 ((uint32_t)0x00F0) /*!<EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 ((uint32_t)0x0F00) /*!<EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 ((uint32_t)0xF000) /*!<EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA ((uint32_t)0x0000) /*!<PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB ((uint32_t)0x0001) /*!<PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC ((uint32_t)0x0002) /*!<PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD ((uint32_t)0x0003) /*!<PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PE ((uint32_t)0x0004) /*!<PE[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PH ((uint32_t)0x0007) /*!<PH[8] pin */
+
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA ((uint32_t)0x0000) /*!<PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB ((uint32_t)0x0010) /*!<PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC ((uint32_t)0x0020) /*!<PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD ((uint32_t)0x0030) /*!<PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PE ((uint32_t)0x0040) /*!<PE[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PH ((uint32_t)0x0070) /*!<PH[9] pin */
+
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA ((uint32_t)0x0000) /*!<PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB ((uint32_t)0x0100) /*!<PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC ((uint32_t)0x0200) /*!<PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD ((uint32_t)0x0300) /*!<PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PE ((uint32_t)0x0400) /*!<PE[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PH ((uint32_t)0x0700) /*!<PH[10] pin */
+
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA ((uint32_t)0x0000) /*!<PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB ((uint32_t)0x1000) /*!<PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC ((uint32_t)0x2000) /*!<PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD ((uint32_t)0x3000) /*!<PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PE ((uint32_t)0x4000) /*!<PE[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PH ((uint32_t)0x7000) /*!<PH[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register ***************/
+#define SYSCFG_EXTICR4_EXTI12 ((uint32_t)0x000F) /*!<EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 ((uint32_t)0x00F0) /*!<EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 ((uint32_t)0x0F00) /*!<EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 ((uint32_t)0xF000) /*!<EXTI 15 configuration */
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA ((uint32_t)0x0000) /*!<PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB ((uint32_t)0x0001) /*!<PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC ((uint32_t)0x0002) /*!<PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD ((uint32_t)0x0003) /*!<PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PE ((uint32_t)0x0004) /*!<PE[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PH ((uint32_t)0x0007) /*!<PH[12] pin */
+
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA ((uint32_t)0x0000) /*!<PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB ((uint32_t)0x0010) /*!<PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC ((uint32_t)0x0020) /*!<PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD ((uint32_t)0x0030) /*!<PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PE ((uint32_t)0x0040) /*!<PE[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PH ((uint32_t)0x0070) /*!<PH[13] pin */
+
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA ((uint32_t)0x0000) /*!<PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB ((uint32_t)0x0100) /*!<PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC ((uint32_t)0x0200) /*!<PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD ((uint32_t)0x0300) /*!<PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PE ((uint32_t)0x0400) /*!<PE[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PH ((uint32_t)0x0700) /*!<PH[14] pin */
+
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA ((uint32_t)0x0000) /*!<PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB ((uint32_t)0x1000) /*!<PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC ((uint32_t)0x2000) /*!<PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD ((uint32_t)0x3000) /*!<PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PE ((uint32_t)0x4000) /*!<PE[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PH ((uint32_t)0x7000) /*!<PH[15] pin */
+
+/****************** Bit definition for SYSCFG_CMPCR register ****************/
+#define SYSCFG_CMPCR_CMP_PD ((uint32_t)0x00000001) /*!<Compensation cell ready flag */
+#define SYSCFG_CMPCR_READY ((uint32_t)0x00000100) /*!<Compensation cell power-down */
+
+/******************************************************************************/
+/* */
+/* TIM */
+/* */
+/******************************************************************************/
+/******************* Bit definition for TIM_CR1 register ********************/
+#define TIM_CR1_CEN ((uint32_t)0x0001) /*!<Counter enable */
+#define TIM_CR1_UDIS ((uint32_t)0x0002) /*!<Update disable */
+#define TIM_CR1_URS ((uint32_t)0x0004) /*!<Update request source */
+#define TIM_CR1_OPM ((uint32_t)0x0008) /*!<One pulse mode */
+#define TIM_CR1_DIR ((uint32_t)0x0010) /*!<Direction */
+
+#define TIM_CR1_CMS ((uint32_t)0x0060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint32_t)0x0020) /*!<Bit 0 */
+#define TIM_CR1_CMS_1 ((uint32_t)0x0040) /*!<Bit 1 */
+
+#define TIM_CR1_ARPE ((uint32_t)0x0080) /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint32_t)0x0300) /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint32_t)0x0100) /*!<Bit 0 */
+#define TIM_CR1_CKD_1 ((uint32_t)0x0200) /*!<Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register ********************/
+#define TIM_CR2_CCPC ((uint32_t)0x0001) /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS ((uint32_t)0x0004) /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS ((uint32_t)0x0008) /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint32_t)0x0070) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint32_t)0x0010) /*!<Bit 0 */
+#define TIM_CR2_MMS_1 ((uint32_t)0x0020) /*!<Bit 1 */
+#define TIM_CR2_MMS_2 ((uint32_t)0x0040) /*!<Bit 2 */
+
+#define TIM_CR2_TI1S ((uint32_t)0x0080) /*!<TI1 Selection */
+#define TIM_CR2_OIS1 ((uint32_t)0x0100) /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N ((uint32_t)0x0200) /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 ((uint32_t)0x0400) /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N ((uint32_t)0x0800) /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 ((uint32_t)0x1000) /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N ((uint32_t)0x2000) /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 ((uint32_t)0x4000) /*!<Output Idle state 4 (OC4 output) */
+
+/******************* Bit definition for TIM_SMCR register *******************/
+#define TIM_SMCR_SMS ((uint32_t)0x0007) /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint32_t)0x0004) /*!<Bit 2 */
+
+#define TIM_SMCR_TS ((uint32_t)0x0070) /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint32_t)0x0010) /*!<Bit 0 */
+#define TIM_SMCR_TS_1 ((uint32_t)0x0020) /*!<Bit 1 */
+#define TIM_SMCR_TS_2 ((uint32_t)0x0040) /*!<Bit 2 */
+
+#define TIM_SMCR_MSM ((uint32_t)0x0080) /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint32_t)0x0F00) /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint32_t)0x0100) /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint32_t)0x0200) /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint32_t)0x0400) /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint32_t)0x0800) /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint32_t)0x3000) /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint32_t)0x1000) /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint32_t)0x2000) /*!<Bit 1 */
+
+#define TIM_SMCR_ECE ((uint32_t)0x4000) /*!<External clock enable */
+#define TIM_SMCR_ETP ((uint32_t)0x8000) /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register *******************/
+#define TIM_DIER_UIE ((uint32_t)0x0001) /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint32_t)0x0002) /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint32_t)0x0004) /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint32_t)0x0008) /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint32_t)0x0010) /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE ((uint32_t)0x0020) /*!<COM interrupt enable */
+#define TIM_DIER_TIE ((uint32_t)0x0040) /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE ((uint32_t)0x0080) /*!<Break interrupt enable */
+#define TIM_DIER_UDE ((uint32_t)0x0100) /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint32_t)0x0200) /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint32_t)0x0400) /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint32_t)0x0800) /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint32_t)0x1000) /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint32_t)0x2000) /*!<COM DMA request enable */
+#define TIM_DIER_TDE ((uint32_t)0x4000) /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register ********************/
+#define TIM_SR_UIF ((uint32_t)0x0001) /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint32_t)0x0002) /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint32_t)0x0004) /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint32_t)0x0008) /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint32_t)0x0010) /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF ((uint32_t)0x0020) /*!<COM interrupt Flag */
+#define TIM_SR_TIF ((uint32_t)0x0040) /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF ((uint32_t)0x0080) /*!<Break interrupt Flag */
+#define TIM_SR_CC1OF ((uint32_t)0x0200) /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint32_t)0x0400) /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint32_t)0x0800) /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint32_t)0x1000) /*!<Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register ********************/
+#define TIM_EGR_UG ((uint32_t)0x01) /*!<Update Generation */
+#define TIM_EGR_CC1G ((uint32_t)0x02) /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint32_t)0x04) /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint32_t)0x08) /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint32_t)0x10) /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG ((uint32_t)0x20) /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG ((uint32_t)0x40) /*!<Trigger Generation */
+#define TIM_EGR_BG ((uint32_t)0x80) /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register *******************/
+#define TIM_CCMR1_CC1S ((uint32_t)0x0003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint32_t)0x0002) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint32_t)0x0004) /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint32_t)0x0008) /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint32_t)0x0070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint32_t)0x0010) /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint32_t)0x0020) /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint32_t)0x0040) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC1CE ((uint32_t)0x0080) /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint32_t)0x0300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint32_t)0x0100) /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint32_t)0x0200) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint32_t)0x0400) /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint32_t)0x0800) /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint32_t)0x7000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint32_t)0x1000) /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint32_t)0x2000) /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint32_t)0x4000) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC2CE ((uint32_t)0x8000) /*!<Output Compare 2 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint32_t)0x000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint32_t)0x0004) /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint32_t)0x0008) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint32_t)0x00F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint32_t)0x0010) /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint32_t)0x0020) /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint32_t)0x0040) /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint32_t)0x0080) /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint32_t)0x0C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint32_t)0x0400) /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint32_t)0x0800) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint32_t)0xF000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint32_t)0x1000) /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint32_t)0x2000) /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint32_t)0x4000) /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint32_t)0x8000) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register *******************/
+#define TIM_CCMR2_CC3S ((uint32_t)0x0003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint32_t)0x0002) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint32_t)0x0004) /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint32_t)0x0008) /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint32_t)0x0070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint32_t)0x0010) /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint32_t)0x0020) /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint32_t)0x0040) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC3CE ((uint32_t)0x0080) /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint32_t)0x0300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint32_t)0x0100) /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint32_t)0x0200) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint32_t)0x0400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint32_t)0x0800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint32_t)0x7000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint32_t)0x1000) /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint32_t)0x2000) /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint32_t)0x4000) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC4CE ((uint32_t)0x8000) /*!<Output Compare 4 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint32_t)0x000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint32_t)0x0004) /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint32_t)0x0008) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint32_t)0x00F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint32_t)0x0010) /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint32_t)0x0020) /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint32_t)0x0040) /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint32_t)0x0080) /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint32_t)0x0C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint32_t)0x0400) /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint32_t)0x0800) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint32_t)0xF000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint32_t)0x1000) /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint32_t)0x2000) /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint32_t)0x4000) /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint32_t)0x8000) /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register *******************/
+#define TIM_CCER_CC1E ((uint32_t)0x0001) /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint32_t)0x0002) /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE ((uint32_t)0x0004) /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP ((uint32_t)0x0008) /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint32_t)0x0010) /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint32_t)0x0020) /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE ((uint32_t)0x0040) /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP ((uint32_t)0x0080) /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint32_t)0x0100) /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint32_t)0x0200) /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE ((uint32_t)0x0400) /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP ((uint32_t)0x0800) /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint32_t)0x1000) /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint32_t)0x2000) /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint32_t)0x8000) /*!<Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register ********************/
+#define TIM_CNT_CNT ((uint32_t)0xFFFF) /*!<Counter Value */
+
+/******************* Bit definition for TIM_PSC register ********************/
+#define TIM_PSC_PSC ((uint32_t)0xFFFF) /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register ********************/
+#define TIM_ARR_ARR ((uint32_t)0xFFFF) /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register ********************/
+#define TIM_RCR_REP ((uint32_t)0xFF) /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register *******************/
+#define TIM_CCR1_CCR1 ((uint32_t)0xFFFF) /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register *******************/
+#define TIM_CCR2_CCR2 ((uint32_t)0xFFFF) /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register *******************/
+#define TIM_CCR3_CCR3 ((uint32_t)0xFFFF) /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register *******************/
+#define TIM_CCR4_CCR4 ((uint32_t)0xFFFF) /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_BDTR register *******************/
+#define TIM_BDTR_DTG ((uint32_t)0x00FF) /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 ((uint32_t)0x0040) /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 ((uint32_t)0x0080) /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK ((uint32_t)0x0300) /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 ((uint32_t)0x0100) /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 ((uint32_t)0x0200) /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI ((uint32_t)0x0400) /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR ((uint32_t)0x0800) /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE ((uint32_t)0x1000) /*!<Break enable */
+#define TIM_BDTR_BKP ((uint32_t)0x2000) /*!<Break Polarity */
+#define TIM_BDTR_AOE ((uint32_t)0x4000) /*!<Automatic Output enable */
+#define TIM_BDTR_MOE ((uint32_t)0x8000) /*!<Main Output enable */
+
+/******************* Bit definition for TIM_DCR register ********************/
+#define TIM_DCR_DBA ((uint32_t)0x001F) /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define TIM_DCR_DBA_1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define TIM_DCR_DBA_2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define TIM_DCR_DBA_3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define TIM_DCR_DBA_4 ((uint32_t)0x0010) /*!<Bit 4 */
+
+#define TIM_DCR_DBL ((uint32_t)0x1F00) /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint32_t)0x0100) /*!<Bit 0 */
+#define TIM_DCR_DBL_1 ((uint32_t)0x0200) /*!<Bit 1 */
+#define TIM_DCR_DBL_2 ((uint32_t)0x0400) /*!<Bit 2 */
+#define TIM_DCR_DBL_3 ((uint32_t)0x0800) /*!<Bit 3 */
+#define TIM_DCR_DBL_4 ((uint32_t)0x1000) /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register *******************/
+#define TIM_DMAR_DMAB ((uint32_t)0xFFFF) /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM_OR register *********************/
+#define TIM_OR_TI4_RMP ((uint32_t)0x00C0) /*!<TI4_RMP[1:0] bits (TIM5 Input 4 remap) */
+#define TIM_OR_TI4_RMP_0 ((uint32_t)0x0040) /*!<Bit 0 */
+#define TIM_OR_TI4_RMP_1 ((uint32_t)0x0080) /*!<Bit 1 */
+#define TIM_OR_ITR1_RMP ((uint32_t)0x0C00) /*!<ITR1_RMP[1:0] bits (TIM2 Internal trigger 1 remap) */
+#define TIM_OR_ITR1_RMP_0 ((uint32_t)0x0400) /*!<Bit 0 */
+#define TIM_OR_ITR1_RMP_1 ((uint32_t)0x0800) /*!<Bit 1 */
+
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter */
+/* */
+/******************************************************************************/
+/******************* Bit definition for USART_SR register *******************/
+#define USART_SR_PE ((uint32_t)0x0001) /*!<Parity Error */
+#define USART_SR_FE ((uint32_t)0x0002) /*!<Framing Error */
+#define USART_SR_NE ((uint32_t)0x0004) /*!<Noise Error Flag */
+#define USART_SR_ORE ((uint32_t)0x0008) /*!<OverRun Error */
+#define USART_SR_IDLE ((uint32_t)0x0010) /*!<IDLE line detected */
+#define USART_SR_RXNE ((uint32_t)0x0020) /*!<Read Data Register Not Empty */
+#define USART_SR_TC ((uint32_t)0x0040) /*!<Transmission Complete */
+#define USART_SR_TXE ((uint32_t)0x0080) /*!<Transmit Data Register Empty */
+#define USART_SR_LBD ((uint32_t)0x0100) /*!<LIN Break Detection Flag */
+#define USART_SR_CTS ((uint32_t)0x0200) /*!<CTS Flag */
+
+/******************* Bit definition for USART_DR register *******************/
+#define USART_DR_DR ((uint32_t)0x01FF) /*!<Data value */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_Fraction ((uint32_t)0x000F) /*!<Fraction of USARTDIV */
+#define USART_BRR_DIV_Mantissa ((uint32_t)0xFFF0) /*!<Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_SBK ((uint32_t)0x0001) /*!<Send Break */
+#define USART_CR1_RWU ((uint32_t)0x0002) /*!<Receiver wakeup */
+#define USART_CR1_RE ((uint32_t)0x0004) /*!<Receiver Enable */
+#define USART_CR1_TE ((uint32_t)0x0008) /*!<Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint32_t)0x0010) /*!<IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint32_t)0x0020) /*!<RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint32_t)0x0040) /*!<Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint32_t)0x0080) /*!<PE Interrupt Enable */
+#define USART_CR1_PEIE ((uint32_t)0x0100) /*!<PE Interrupt Enable */
+#define USART_CR1_PS ((uint32_t)0x0200) /*!<Parity Selection */
+#define USART_CR1_PCE ((uint32_t)0x0400) /*!<Parity Control Enable */
+#define USART_CR1_WAKE ((uint32_t)0x0800) /*!<Wakeup method */
+#define USART_CR1_M ((uint32_t)0x1000) /*!<Word length */
+#define USART_CR1_UE ((uint32_t)0x2000) /*!<USART Enable */
+#define USART_CR1_OVER8 ((uint32_t)0x8000) /*!<USART Oversampling by 8 enable */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADD ((uint32_t)0x000F) /*!<Address of the USART node */
+#define USART_CR2_LBDL ((uint32_t)0x0020) /*!<LIN Break Detection Length */
+#define USART_CR2_LBDIE ((uint32_t)0x0040) /*!<LIN Break Detection Interrupt Enable */
+#define USART_CR2_LBCL ((uint32_t)0x0100) /*!<Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint32_t)0x0200) /*!<Clock Phase */
+#define USART_CR2_CPOL ((uint32_t)0x0400) /*!<Clock Polarity */
+#define USART_CR2_CLKEN ((uint32_t)0x0800) /*!<Clock Enable */
+
+#define USART_CR2_STOP ((uint32_t)0x3000) /*!<STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint32_t)0x1000) /*!<Bit 0 */
+#define USART_CR2_STOP_1 ((uint32_t)0x2000) /*!<Bit 1 */
+
+#define USART_CR2_LINEN ((uint32_t)0x4000) /*!<LIN mode enable */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint32_t)0x0001) /*!<Error Interrupt Enable */
+#define USART_CR3_IREN ((uint32_t)0x0002) /*!<IrDA mode Enable */
+#define USART_CR3_IRLP ((uint32_t)0x0004) /*!<IrDA Low-Power */
+#define USART_CR3_HDSEL ((uint32_t)0x0008) /*!<Half-Duplex Selection */
+#define USART_CR3_NACK ((uint32_t)0x0010) /*!<Smartcard NACK enable */
+#define USART_CR3_SCEN ((uint32_t)0x0020) /*!<Smartcard mode enable */
+#define USART_CR3_DMAR ((uint32_t)0x0040) /*!<DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint32_t)0x0080) /*!<DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint32_t)0x0100) /*!<RTS Enable */
+#define USART_CR3_CTSE ((uint32_t)0x0200) /*!<CTS Enable */
+#define USART_CR3_CTSIE ((uint32_t)0x0400) /*!<CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint32_t)0x0800) /*!<USART One bit method enable */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint32_t)0x00FF) /*!<PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_PSC_0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define USART_GTPR_PSC_1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define USART_GTPR_PSC_2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define USART_GTPR_PSC_3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define USART_GTPR_PSC_4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define USART_GTPR_PSC_5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define USART_GTPR_PSC_6 ((uint32_t)0x0040) /*!<Bit 6 */
+#define USART_GTPR_PSC_7 ((uint32_t)0x0080) /*!<Bit 7 */
+
+#define USART_GTPR_GT ((uint32_t)0xFF00) /*!<Guard time value */
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint32_t)0x7F) /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint32_t)0x01) /*!<Bit 0 */
+#define WWDG_CR_T1 ((uint32_t)0x02) /*!<Bit 1 */
+#define WWDG_CR_T2 ((uint32_t)0x04) /*!<Bit 2 */
+#define WWDG_CR_T3 ((uint32_t)0x08) /*!<Bit 3 */
+#define WWDG_CR_T4 ((uint32_t)0x10) /*!<Bit 4 */
+#define WWDG_CR_T5 ((uint32_t)0x20) /*!<Bit 5 */
+#define WWDG_CR_T6 ((uint32_t)0x40) /*!<Bit 6 */
+
+#define WWDG_CR_WDGA ((uint32_t)0x80) /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint32_t)0x007F) /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define WWDG_CFR_W1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define WWDG_CFR_W2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define WWDG_CFR_W3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define WWDG_CFR_W4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define WWDG_CFR_W5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define WWDG_CFR_W6 ((uint32_t)0x0040) /*!<Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint32_t)0x0180) /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint32_t)0x0080) /*!<Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint32_t)0x0100) /*!<Bit 1 */
+
+#define WWDG_CFR_EWI ((uint32_t)0x0200) /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint32_t)0x01) /*!<Early Wakeup Interrupt Flag */
+
+
+/******************************************************************************/
+/* */
+/* DBG */
+/* */
+/******************************************************************************/
+/******************** Bit definition for DBGMCU_IDCODE register *************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF)
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000)
+
+/******************** Bit definition for DBGMCU_CR register *****************/
+#define DBGMCU_CR_DBG_SLEEP ((uint32_t)0x00000001)
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002)
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004)
+#define DBGMCU_CR_TRACE_IOEN ((uint32_t)0x00000020)
+
+#define DBGMCU_CR_TRACE_MODE ((uint32_t)0x000000C0)
+#define DBGMCU_CR_TRACE_MODE_0 ((uint32_t)0x00000040)/*!<Bit 0 */
+#define DBGMCU_CR_TRACE_MODE_1 ((uint32_t)0x00000080)/*!<Bit 1 */
+
+/******************** Bit definition for DBGMCU_APB1_FZ register ************/
+#define DBGMCU_APB1_FZ_DBG_TIM2_STOP ((uint32_t)0x00000001)
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002)
+#define DBGMCU_APB1_FZ_DBG_TIM4_STOP ((uint32_t)0x00000004)
+#define DBGMCU_APB1_FZ_DBG_TIM5_STOP ((uint32_t)0x00000008)
+#define DBGMCU_APB1_FZ_DBG_TIM6_STOP ((uint32_t)0x00000010)
+#define DBGMCU_APB1_FZ_DBG_TIM7_STOP ((uint32_t)0x00000020)
+#define DBGMCU_APB1_FZ_DBG_TIM12_STOP ((uint32_t)0x00000040)
+#define DBGMCU_APB1_FZ_DBG_TIM13_STOP ((uint32_t)0x00000080)
+#define DBGMCU_APB1_FZ_DBG_TIM14_STOP ((uint32_t)0x00000100)
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400)
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800)
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000)
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000)
+#define DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00400000)
+#define DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT ((uint32_t)0x00800000)
+#define DBGMCU_APB1_FZ_DBG_CAN1_STOP ((uint32_t)0x02000000)
+#define DBGMCU_APB1_FZ_DBG_CAN2_STOP ((uint32_t)0x04000000)
+/* Old IWDGSTOP bit definition, maintained for legacy purpose */
+#define DBGMCU_APB1_FZ_DBG_IWDEG_STOP DBGMCU_APB1_FZ_DBG_IWDG_STOP
+
+/******************** Bit definition for DBGMCU_APB2_FZ register ************/
+#define DBGMCU_APB2_FZ_DBG_TIM1_STOP ((uint32_t)0x00000001)
+#define DBGMCU_APB2_FZ_DBG_TIM8_STOP ((uint32_t)0x00000002)
+#define DBGMCU_APB2_FZ_DBG_TIM9_STOP ((uint32_t)0x00010000)
+#define DBGMCU_APB2_FZ_DBG_TIM10_STOP ((uint32_t)0x00020000)
+#define DBGMCU_APB2_FZ_DBG_TIM11_STOP ((uint32_t)0x00040000)
+
+/******************************************************************************/
+/* */
+/* USB_OTG */
+/* */
+/******************************************************************************/
+/******************** Bit definition forUSB_OTG_GOTGCTL register ********************/
+#define USB_OTG_GOTGCTL_SRQSCS ((uint32_t)0x00000001) /*!< Session request success */
+#define USB_OTG_GOTGCTL_SRQ ((uint32_t)0x00000002) /*!< Session request */
+#define USB_OTG_GOTGCTL_HNGSCS ((uint32_t)0x00000100) /*!< Host negotiation success */
+#define USB_OTG_GOTGCTL_HNPRQ ((uint32_t)0x00000200) /*!< HNP request */
+#define USB_OTG_GOTGCTL_HSHNPEN ((uint32_t)0x00000400) /*!< Host set HNP enable */
+#define USB_OTG_GOTGCTL_DHNPEN ((uint32_t)0x00000800) /*!< Device HNP enabled */
+#define USB_OTG_GOTGCTL_CIDSTS ((uint32_t)0x00010000) /*!< Connector ID status */
+#define USB_OTG_GOTGCTL_DBCT ((uint32_t)0x00020000) /*!< Long/short debounce time */
+#define USB_OTG_GOTGCTL_ASVLD ((uint32_t)0x00040000) /*!< A-session valid */
+#define USB_OTG_GOTGCTL_BSVLD ((uint32_t)0x00080000) /*!< B-session valid */
+
+/******************** Bit definition forUSB_OTG_HCFG register ********************/
+
+#define USB_OTG_HCFG_FSLSPCS ((uint32_t)0x00000003) /*!< FS/LS PHY clock select */
+#define USB_OTG_HCFG_FSLSPCS_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define USB_OTG_HCFG_FSLSPCS_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define USB_OTG_HCFG_FSLSS ((uint32_t)0x00000004) /*!< FS- and LS-only support */
+
+/******************** Bit definition forUSB_OTG_DCFG register ********************/
+
+#define USB_OTG_DCFG_DSPD ((uint32_t)0x00000003) /*!< Device speed */
+#define USB_OTG_DCFG_DSPD_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define USB_OTG_DCFG_DSPD_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define USB_OTG_DCFG_NZLSOHSK ((uint32_t)0x00000004) /*!< Nonzero-length status OUT handshake */
+
+#define USB_OTG_DCFG_DAD ((uint32_t)0x000007F0) /*!< Device address */
+#define USB_OTG_DCFG_DAD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define USB_OTG_DCFG_DAD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define USB_OTG_DCFG_DAD_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define USB_OTG_DCFG_DAD_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+#define USB_OTG_DCFG_DAD_4 ((uint32_t)0x00000100) /*!<Bit 4 */
+#define USB_OTG_DCFG_DAD_5 ((uint32_t)0x00000200) /*!<Bit 5 */
+#define USB_OTG_DCFG_DAD_6 ((uint32_t)0x00000400) /*!<Bit 6 */
+
+#define USB_OTG_DCFG_PFIVL ((uint32_t)0x00001800) /*!< Periodic (micro)frame interval */
+#define USB_OTG_DCFG_PFIVL_0 ((uint32_t)0x00000800) /*!<Bit 0 */
+#define USB_OTG_DCFG_PFIVL_1 ((uint32_t)0x00001000) /*!<Bit 1 */
+
+#define USB_OTG_DCFG_PERSCHIVL ((uint32_t)0x03000000) /*!< Periodic scheduling interval */
+#define USB_OTG_DCFG_PERSCHIVL_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define USB_OTG_DCFG_PERSCHIVL_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+
+/******************** Bit definition forUSB_OTG_PCGCR register ********************/
+#define USB_OTG_PCGCR_STPPCLK ((uint32_t)0x00000001) /*!< Stop PHY clock */
+#define USB_OTG_PCGCR_GATEHCLK ((uint32_t)0x00000002) /*!< Gate HCLK */
+#define USB_OTG_PCGCR_PHYSUSP ((uint32_t)0x00000010) /*!< PHY suspended */
+
+/******************** Bit definition forUSB_OTG_GOTGINT register ********************/
+#define USB_OTG_GOTGINT_SEDET ((uint32_t)0x00000004) /*!< Session end detected */
+#define USB_OTG_GOTGINT_SRSSCHG ((uint32_t)0x00000100) /*!< Session request success status change */
+#define USB_OTG_GOTGINT_HNSSCHG ((uint32_t)0x00000200) /*!< Host negotiation success status change */
+#define USB_OTG_GOTGINT_HNGDET ((uint32_t)0x00020000) /*!< Host negotiation detected */
+#define USB_OTG_GOTGINT_ADTOCHG ((uint32_t)0x00040000) /*!< A-device timeout change */
+#define USB_OTG_GOTGINT_DBCDNE ((uint32_t)0x00080000) /*!< Debounce done */
+
+/******************** Bit definition forUSB_OTG_DCTL register ********************/
+#define USB_OTG_DCTL_RWUSIG ((uint32_t)0x00000001) /*!< Remote wakeup signaling */
+#define USB_OTG_DCTL_SDIS ((uint32_t)0x00000002) /*!< Soft disconnect */
+#define USB_OTG_DCTL_GINSTS ((uint32_t)0x00000004) /*!< Global IN NAK status */
+#define USB_OTG_DCTL_GONSTS ((uint32_t)0x00000008) /*!< Global OUT NAK status */
+
+#define USB_OTG_DCTL_TCTL ((uint32_t)0x00000070) /*!< Test control */
+#define USB_OTG_DCTL_TCTL_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define USB_OTG_DCTL_TCTL_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define USB_OTG_DCTL_TCTL_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define USB_OTG_DCTL_SGINAK ((uint32_t)0x00000080) /*!< Set global IN NAK */
+#define USB_OTG_DCTL_CGINAK ((uint32_t)0x00000100) /*!< Clear global IN NAK */
+#define USB_OTG_DCTL_SGONAK ((uint32_t)0x00000200) /*!< Set global OUT NAK */
+#define USB_OTG_DCTL_CGONAK ((uint32_t)0x00000400) /*!< Clear global OUT NAK */
+#define USB_OTG_DCTL_POPRGDNE ((uint32_t)0x00000800) /*!< Power-on programming done */
+
+/******************** Bit definition forUSB_OTG_HFIR register ********************/
+#define USB_OTG_HFIR_FRIVL ((uint32_t)0x0000FFFF) /*!< Frame interval */
+
+/******************** Bit definition forUSB_OTG_HFNUM register ********************/
+#define USB_OTG_HFNUM_FRNUM ((uint32_t)0x0000FFFF) /*!< Frame number */
+#define USB_OTG_HFNUM_FTREM ((uint32_t)0xFFFF0000) /*!< Frame time remaining */
+
+/******************** Bit definition forUSB_OTG_DSTS register ********************/
+#define USB_OTG_DSTS_SUSPSTS ((uint32_t)0x00000001) /*!< Suspend status */
+
+#define USB_OTG_DSTS_ENUMSPD ((uint32_t)0x00000006) /*!< Enumerated speed */
+#define USB_OTG_DSTS_ENUMSPD_0 ((uint32_t)0x00000002) /*!<Bit 0 */
+#define USB_OTG_DSTS_ENUMSPD_1 ((uint32_t)0x00000004) /*!<Bit 1 */
+#define USB_OTG_DSTS_EERR ((uint32_t)0x00000008) /*!< Erratic error */
+#define USB_OTG_DSTS_FNSOF ((uint32_t)0x003FFF00) /*!< Frame number of the received SOF */
+
+/******************** Bit definition forUSB_OTG_GAHBCFG register ********************/
+#define USB_OTG_GAHBCFG_GINT ((uint32_t)0x00000001) /*!< Global interrupt mask */
+
+#define USB_OTG_GAHBCFG_HBSTLEN ((uint32_t)0x0000001E) /*!< Burst length/type */
+#define USB_OTG_GAHBCFG_HBSTLEN_0 ((uint32_t)0x00000002) /*!<Bit 0 */
+#define USB_OTG_GAHBCFG_HBSTLEN_1 ((uint32_t)0x00000004) /*!<Bit 1 */
+#define USB_OTG_GAHBCFG_HBSTLEN_2 ((uint32_t)0x00000008) /*!<Bit 2 */
+#define USB_OTG_GAHBCFG_HBSTLEN_3 ((uint32_t)0x00000010) /*!<Bit 3 */
+#define USB_OTG_GAHBCFG_DMAEN ((uint32_t)0x00000020) /*!< DMA enable */
+#define USB_OTG_GAHBCFG_TXFELVL ((uint32_t)0x00000080) /*!< TxFIFO empty level */
+#define USB_OTG_GAHBCFG_PTXFELVL ((uint32_t)0x00000100) /*!< Periodic TxFIFO empty level */
+
+/******************** Bit definition forUSB_OTG_GUSBCFG register ********************/
+
+#define USB_OTG_GUSBCFG_TOCAL ((uint32_t)0x00000007) /*!< FS timeout calibration */
+#define USB_OTG_GUSBCFG_TOCAL_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define USB_OTG_GUSBCFG_TOCAL_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define USB_OTG_GUSBCFG_TOCAL_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define USB_OTG_GUSBCFG_PHYSEL ((uint32_t)0x00000040) /*!< USB 2.0 high-speed ULPI PHY or USB 1.1 full-speed serial transceiver select */
+#define USB_OTG_GUSBCFG_SRPCAP ((uint32_t)0x00000100) /*!< SRP-capable */
+#define USB_OTG_GUSBCFG_HNPCAP ((uint32_t)0x00000200) /*!< HNP-capable */
+
+#define USB_OTG_GUSBCFG_TRDT ((uint32_t)0x00003C00) /*!< USB turnaround time */
+#define USB_OTG_GUSBCFG_TRDT_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define USB_OTG_GUSBCFG_TRDT_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define USB_OTG_GUSBCFG_TRDT_2 ((uint32_t)0x00001000) /*!<Bit 2 */
+#define USB_OTG_GUSBCFG_TRDT_3 ((uint32_t)0x00002000) /*!<Bit 3 */
+#define USB_OTG_GUSBCFG_PHYLPCS ((uint32_t)0x00008000) /*!< PHY Low-power clock select */
+#define USB_OTG_GUSBCFG_ULPIFSLS ((uint32_t)0x00020000) /*!< ULPI FS/LS select */
+#define USB_OTG_GUSBCFG_ULPIAR ((uint32_t)0x00040000) /*!< ULPI Auto-resume */
+#define USB_OTG_GUSBCFG_ULPICSM ((uint32_t)0x00080000) /*!< ULPI Clock SuspendM */
+#define USB_OTG_GUSBCFG_ULPIEVBUSD ((uint32_t)0x00100000) /*!< ULPI External VBUS Drive */
+#define USB_OTG_GUSBCFG_ULPIEVBUSI ((uint32_t)0x00200000) /*!< ULPI external VBUS indicator */
+#define USB_OTG_GUSBCFG_TSDPS ((uint32_t)0x00400000) /*!< TermSel DLine pulsing selection */
+#define USB_OTG_GUSBCFG_PCCI ((uint32_t)0x00800000) /*!< Indicator complement */
+#define USB_OTG_GUSBCFG_PTCI ((uint32_t)0x01000000) /*!< Indicator pass through */
+#define USB_OTG_GUSBCFG_ULPIIPD ((uint32_t)0x02000000) /*!< ULPI interface protect disable */
+#define USB_OTG_GUSBCFG_FHMOD ((uint32_t)0x20000000) /*!< Forced host mode */
+#define USB_OTG_GUSBCFG_FDMOD ((uint32_t)0x40000000) /*!< Forced peripheral mode */
+#define USB_OTG_GUSBCFG_CTXPKT ((uint32_t)0x80000000) /*!< Corrupt Tx packet */
+
+/******************** Bit definition forUSB_OTG_GRSTCTL register ********************/
+#define USB_OTG_GRSTCTL_CSRST ((uint32_t)0x00000001) /*!< Core soft reset */
+#define USB_OTG_GRSTCTL_HSRST ((uint32_t)0x00000002) /*!< HCLK soft reset */
+#define USB_OTG_GRSTCTL_FCRST ((uint32_t)0x00000004) /*!< Host frame counter reset */
+#define USB_OTG_GRSTCTL_RXFFLSH ((uint32_t)0x00000010) /*!< RxFIFO flush */
+#define USB_OTG_GRSTCTL_TXFFLSH ((uint32_t)0x00000020) /*!< TxFIFO flush */
+
+#define USB_OTG_GRSTCTL_TXFNUM ((uint32_t)0x000007C0) /*!< TxFIFO number */
+#define USB_OTG_GRSTCTL_TXFNUM_0 ((uint32_t)0x00000040) /*!<Bit 0 */
+#define USB_OTG_GRSTCTL_TXFNUM_1 ((uint32_t)0x00000080) /*!<Bit 1 */
+#define USB_OTG_GRSTCTL_TXFNUM_2 ((uint32_t)0x00000100) /*!<Bit 2 */
+#define USB_OTG_GRSTCTL_TXFNUM_3 ((uint32_t)0x00000200) /*!<Bit 3 */
+#define USB_OTG_GRSTCTL_TXFNUM_4 ((uint32_t)0x00000400) /*!<Bit 4 */
+#define USB_OTG_GRSTCTL_DMAREQ ((uint32_t)0x40000000) /*!< DMA request signal */
+#define USB_OTG_GRSTCTL_AHBIDL ((uint32_t)0x80000000) /*!< AHB master idle */
+
+/******************** Bit definition forUSB_OTG_DIEPMSK register ********************/
+#define USB_OTG_DIEPMSK_XFRCM ((uint32_t)0x00000001) /*!< Transfer completed interrupt mask */
+#define USB_OTG_DIEPMSK_EPDM ((uint32_t)0x00000002) /*!< Endpoint disabled interrupt mask */
+#define USB_OTG_DIEPMSK_TOM ((uint32_t)0x00000008) /*!< Timeout condition mask (nonisochronous endpoints) */
+#define USB_OTG_DIEPMSK_ITTXFEMSK ((uint32_t)0x00000010) /*!< IN token received when TxFIFO empty mask */
+#define USB_OTG_DIEPMSK_INEPNMM ((uint32_t)0x00000020) /*!< IN token received with EP mismatch mask */
+#define USB_OTG_DIEPMSK_INEPNEM ((uint32_t)0x00000040) /*!< IN endpoint NAK effective mask */
+#define USB_OTG_DIEPMSK_TXFURM ((uint32_t)0x00000100) /*!< FIFO underrun mask */
+#define USB_OTG_DIEPMSK_BIM ((uint32_t)0x00000200) /*!< BNA interrupt mask */
+
+/******************** Bit definition forUSB_OTG_HPTXSTS register ********************/
+#define USB_OTG_HPTXSTS_PTXFSAVL ((uint32_t)0x0000FFFF) /*!< Periodic transmit data FIFO space available */
+
+#define USB_OTG_HPTXSTS_PTXQSAV ((uint32_t)0x00FF0000) /*!< Periodic transmit request queue space available */
+#define USB_OTG_HPTXSTS_PTXQSAV_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define USB_OTG_HPTXSTS_PTXQSAV_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define USB_OTG_HPTXSTS_PTXQSAV_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define USB_OTG_HPTXSTS_PTXQSAV_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define USB_OTG_HPTXSTS_PTXQSAV_4 ((uint32_t)0x00100000) /*!<Bit 4 */
+#define USB_OTG_HPTXSTS_PTXQSAV_5 ((uint32_t)0x00200000) /*!<Bit 5 */
+#define USB_OTG_HPTXSTS_PTXQSAV_6 ((uint32_t)0x00400000) /*!<Bit 6 */
+#define USB_OTG_HPTXSTS_PTXQSAV_7 ((uint32_t)0x00800000) /*!<Bit 7 */
+
+#define USB_OTG_HPTXSTS_PTXQTOP ((uint32_t)0xFF000000) /*!< Top of the periodic transmit request queue */
+#define USB_OTG_HPTXSTS_PTXQTOP_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define USB_OTG_HPTXSTS_PTXQTOP_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define USB_OTG_HPTXSTS_PTXQTOP_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define USB_OTG_HPTXSTS_PTXQTOP_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define USB_OTG_HPTXSTS_PTXQTOP_4 ((uint32_t)0x10000000) /*!<Bit 4 */
+#define USB_OTG_HPTXSTS_PTXQTOP_5 ((uint32_t)0x20000000) /*!<Bit 5 */
+#define USB_OTG_HPTXSTS_PTXQTOP_6 ((uint32_t)0x40000000) /*!<Bit 6 */
+#define USB_OTG_HPTXSTS_PTXQTOP_7 ((uint32_t)0x80000000) /*!<Bit 7 */
+
+/******************** Bit definition forUSB_OTG_HAINT register ********************/
+#define USB_OTG_HAINT_HAINT ((uint32_t)0x0000FFFF) /*!< Channel interrupts */
+
+/******************** Bit definition forUSB_OTG_DOEPMSK register ********************/
+#define USB_OTG_DOEPMSK_XFRCM ((uint32_t)0x00000001) /*!< Transfer completed interrupt mask */
+#define USB_OTG_DOEPMSK_EPDM ((uint32_t)0x00000002) /*!< Endpoint disabled interrupt mask */
+#define USB_OTG_DOEPMSK_STUPM ((uint32_t)0x00000008) /*!< SETUP phase done mask */
+#define USB_OTG_DOEPMSK_OTEPDM ((uint32_t)0x00000010) /*!< OUT token received when endpoint disabled mask */
+#define USB_OTG_DOEPMSK_B2BSTUP ((uint32_t)0x00000040) /*!< Back-to-back SETUP packets received mask */
+#define USB_OTG_DOEPMSK_OPEM ((uint32_t)0x00000100) /*!< OUT packet error mask */
+#define USB_OTG_DOEPMSK_BOIM ((uint32_t)0x00000200) /*!< BNA interrupt mask */
+
+/******************** Bit definition forUSB_OTG_GINTSTS register ********************/
+#define USB_OTG_GINTSTS_CMOD ((uint32_t)0x00000001) /*!< Current mode of operation */
+#define USB_OTG_GINTSTS_MMIS ((uint32_t)0x00000002) /*!< Mode mismatch interrupt */
+#define USB_OTG_GINTSTS_OTGINT ((uint32_t)0x00000004) /*!< OTG interrupt */
+#define USB_OTG_GINTSTS_SOF ((uint32_t)0x00000008) /*!< Start of frame */
+#define USB_OTG_GINTSTS_RXFLVL ((uint32_t)0x00000010) /*!< RxFIFO nonempty */
+#define USB_OTG_GINTSTS_NPTXFE ((uint32_t)0x00000020) /*!< Nonperiodic TxFIFO empty */
+#define USB_OTG_GINTSTS_GINAKEFF ((uint32_t)0x00000040) /*!< Global IN nonperiodic NAK effective */
+#define USB_OTG_GINTSTS_BOUTNAKEFF ((uint32_t)0x00000080) /*!< Global OUT NAK effective */
+#define USB_OTG_GINTSTS_ESUSP ((uint32_t)0x00000400) /*!< Early suspend */
+#define USB_OTG_GINTSTS_USBSUSP ((uint32_t)0x00000800) /*!< USB suspend */
+#define USB_OTG_GINTSTS_USBRST ((uint32_t)0x00001000) /*!< USB reset */
+#define USB_OTG_GINTSTS_ENUMDNE ((uint32_t)0x00002000) /*!< Enumeration done */
+#define USB_OTG_GINTSTS_ISOODRP ((uint32_t)0x00004000) /*!< Isochronous OUT packet dropped interrupt */
+#define USB_OTG_GINTSTS_EOPF ((uint32_t)0x00008000) /*!< End of periodic frame interrupt */
+#define USB_OTG_GINTSTS_IEPINT ((uint32_t)0x00040000) /*!< IN endpoint interrupt */
+#define USB_OTG_GINTSTS_OEPINT ((uint32_t)0x00080000) /*!< OUT endpoint interrupt */
+#define USB_OTG_GINTSTS_IISOIXFR ((uint32_t)0x00100000) /*!< Incomplete isochronous IN transfer */
+#define USB_OTG_GINTSTS_PXFR_INCOMPISOOUT ((uint32_t)0x00200000) /*!< Incomplete periodic transfer */
+#define USB_OTG_GINTSTS_DATAFSUSP ((uint32_t)0x00400000) /*!< Data fetch suspended */
+#define USB_OTG_GINTSTS_HPRTINT ((uint32_t)0x01000000) /*!< Host port interrupt */
+#define USB_OTG_GINTSTS_HCINT ((uint32_t)0x02000000) /*!< Host channels interrupt */
+#define USB_OTG_GINTSTS_PTXFE ((uint32_t)0x04000000) /*!< Periodic TxFIFO empty */
+#define USB_OTG_GINTSTS_CIDSCHG ((uint32_t)0x10000000) /*!< Connector ID status change */
+#define USB_OTG_GINTSTS_DISCINT ((uint32_t)0x20000000) /*!< Disconnect detected interrupt */
+#define USB_OTG_GINTSTS_SRQINT ((uint32_t)0x40000000) /*!< Session request/new session detected interrupt */
+#define USB_OTG_GINTSTS_WKUINT ((uint32_t)0x80000000) /*!< Resume/remote wakeup detected interrupt */
+
+/******************** Bit definition forUSB_OTG_GINTMSK register ********************/
+#define USB_OTG_GINTMSK_MMISM ((uint32_t)0x00000002) /*!< Mode mismatch interrupt mask */
+#define USB_OTG_GINTMSK_OTGINT ((uint32_t)0x00000004) /*!< OTG interrupt mask */
+#define USB_OTG_GINTMSK_SOFM ((uint32_t)0x00000008) /*!< Start of frame mask */
+#define USB_OTG_GINTMSK_RXFLVLM ((uint32_t)0x00000010) /*!< Receive FIFO nonempty mask */
+#define USB_OTG_GINTMSK_NPTXFEM ((uint32_t)0x00000020) /*!< Nonperiodic TxFIFO empty mask */
+#define USB_OTG_GINTMSK_GINAKEFFM ((uint32_t)0x00000040) /*!< Global nonperiodic IN NAK effective mask */
+#define USB_OTG_GINTMSK_GONAKEFFM ((uint32_t)0x00000080) /*!< Global OUT NAK effective mask */
+#define USB_OTG_GINTMSK_ESUSPM ((uint32_t)0x00000400) /*!< Early suspend mask */
+#define USB_OTG_GINTMSK_USBSUSPM ((uint32_t)0x00000800) /*!< USB suspend mask */
+#define USB_OTG_GINTMSK_USBRST ((uint32_t)0x00001000) /*!< USB reset mask */
+#define USB_OTG_GINTMSK_ENUMDNEM ((uint32_t)0x00002000) /*!< Enumeration done mask */
+#define USB_OTG_GINTMSK_ISOODRPM ((uint32_t)0x00004000) /*!< Isochronous OUT packet dropped interrupt mask */
+#define USB_OTG_GINTMSK_EOPFM ((uint32_t)0x00008000) /*!< End of periodic frame interrupt mask */
+#define USB_OTG_GINTMSK_EPMISM ((uint32_t)0x00020000) /*!< Endpoint mismatch interrupt mask */
+#define USB_OTG_GINTMSK_IEPINT ((uint32_t)0x00040000) /*!< IN endpoints interrupt mask */
+#define USB_OTG_GINTMSK_OEPINT ((uint32_t)0x00080000) /*!< OUT endpoints interrupt mask */
+#define USB_OTG_GINTMSK_IISOIXFRM ((uint32_t)0x00100000) /*!< Incomplete isochronous IN transfer mask */
+#define USB_OTG_GINTMSK_PXFRM_IISOOXFRM ((uint32_t)0x00200000) /*!< Incomplete periodic transfer mask */
+#define USB_OTG_GINTMSK_FSUSPM ((uint32_t)0x00400000) /*!< Data fetch suspended mask */
+#define USB_OTG_GINTMSK_PRTIM ((uint32_t)0x01000000) /*!< Host port interrupt mask */
+#define USB_OTG_GINTMSK_HCIM ((uint32_t)0x02000000) /*!< Host channels interrupt mask */
+#define USB_OTG_GINTMSK_PTXFEM ((uint32_t)0x04000000) /*!< Periodic TxFIFO empty mask */
+#define USB_OTG_GINTMSK_CIDSCHGM ((uint32_t)0x10000000) /*!< Connector ID status change mask */
+#define USB_OTG_GINTMSK_DISCINT ((uint32_t)0x20000000) /*!< Disconnect detected interrupt mask */
+#define USB_OTG_GINTMSK_SRQIM ((uint32_t)0x40000000) /*!< Session request/new session detected interrupt mask */
+#define USB_OTG_GINTMSK_WUIM ((uint32_t)0x80000000) /*!< Resume/remote wakeup detected interrupt mask */
+
+/******************** Bit definition forUSB_OTG_DAINT register ********************/
+#define USB_OTG_DAINT_IEPINT ((uint32_t)0x0000FFFF) /*!< IN endpoint interrupt bits */
+#define USB_OTG_DAINT_OEPINT ((uint32_t)0xFFFF0000) /*!< OUT endpoint interrupt bits */
+
+/******************** Bit definition forUSB_OTG_HAINTMSK register ********************/
+#define USB_OTG_HAINTMSK_HAINTM ((uint32_t)0x0000FFFF) /*!< Channel interrupt mask */
+
+/******************** Bit definition for USB_OTG_GRXSTSP register ********************/
+#define USB_OTG_GRXSTSP_EPNUM ((uint32_t)0x0000000F) /*!< IN EP interrupt mask bits */
+#define USB_OTG_GRXSTSP_BCNT ((uint32_t)0x00007FF0) /*!< OUT EP interrupt mask bits */
+#define USB_OTG_GRXSTSP_DPID ((uint32_t)0x00018000) /*!< OUT EP interrupt mask bits */
+#define USB_OTG_GRXSTSP_PKTSTS ((uint32_t)0x001E0000) /*!< OUT EP interrupt mask bits */
+
+/******************** Bit definition forUSB_OTG_DAINTMSK register ********************/
+#define USB_OTG_DAINTMSK_IEPM ((uint32_t)0x0000FFFF) /*!< IN EP interrupt mask bits */
+#define USB_OTG_DAINTMSK_OEPM ((uint32_t)0xFFFF0000) /*!< OUT EP interrupt mask bits */
+
+/******************** Bit definition for OTG register ********************/
+
+#define USB_OTG_CHNUM ((uint32_t)0x0000000F) /*!< Channel number */
+#define USB_OTG_CHNUM_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define USB_OTG_CHNUM_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define USB_OTG_CHNUM_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define USB_OTG_CHNUM_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define USB_OTG_BCNT ((uint32_t)0x00007FF0) /*!< Byte count */
+
+#define USB_OTG_DPID ((uint32_t)0x00018000) /*!< Data PID */
+#define USB_OTG_DPID_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define USB_OTG_DPID_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+
+#define USB_OTG_PKTSTS ((uint32_t)0x001E0000) /*!< Packet status */
+#define USB_OTG_PKTSTS_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define USB_OTG_PKTSTS_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define USB_OTG_PKTSTS_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+#define USB_OTG_PKTSTS_3 ((uint32_t)0x00100000) /*!<Bit 3 */
+
+#define USB_OTG_EPNUM ((uint32_t)0x0000000F) /*!< Endpoint number */
+#define USB_OTG_EPNUM_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define USB_OTG_EPNUM_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define USB_OTG_EPNUM_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define USB_OTG_EPNUM_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define USB_OTG_FRMNUM ((uint32_t)0x01E00000) /*!< Frame number */
+#define USB_OTG_FRMNUM_0 ((uint32_t)0x00200000) /*!<Bit 0 */
+#define USB_OTG_FRMNUM_1 ((uint32_t)0x00400000) /*!<Bit 1 */
+#define USB_OTG_FRMNUM_2 ((uint32_t)0x00800000) /*!<Bit 2 */
+#define USB_OTG_FRMNUM_3 ((uint32_t)0x01000000) /*!<Bit 3 */
+
+/******************** Bit definition for OTG register ********************/
+
+#define USB_OTG_CHNUM ((uint32_t)0x0000000F) /*!< Channel number */
+#define USB_OTG_CHNUM_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define USB_OTG_CHNUM_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define USB_OTG_CHNUM_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define USB_OTG_CHNUM_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define USB_OTG_BCNT ((uint32_t)0x00007FF0) /*!< Byte count */
+
+#define USB_OTG_DPID ((uint32_t)0x00018000) /*!< Data PID */
+#define USB_OTG_DPID_0 ((uint32_t)0x00008000) /*!<Bit 0 */
+#define USB_OTG_DPID_1 ((uint32_t)0x00010000) /*!<Bit 1 */
+
+#define USB_OTG_PKTSTS ((uint32_t)0x001E0000) /*!< Packet status */
+#define USB_OTG_PKTSTS_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define USB_OTG_PKTSTS_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define USB_OTG_PKTSTS_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+#define USB_OTG_PKTSTS_3 ((uint32_t)0x00100000) /*!<Bit 3 */
+
+#define USB_OTG_EPNUM ((uint32_t)0x0000000F) /*!< Endpoint number */
+#define USB_OTG_EPNUM_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define USB_OTG_EPNUM_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define USB_OTG_EPNUM_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define USB_OTG_EPNUM_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define USB_OTG_FRMNUM ((uint32_t)0x01E00000) /*!< Frame number */
+#define USB_OTG_FRMNUM_0 ((uint32_t)0x00200000) /*!<Bit 0 */
+#define USB_OTG_FRMNUM_1 ((uint32_t)0x00400000) /*!<Bit 1 */
+#define USB_OTG_FRMNUM_2 ((uint32_t)0x00800000) /*!<Bit 2 */
+#define USB_OTG_FRMNUM_3 ((uint32_t)0x01000000) /*!<Bit 3 */
+
+/******************** Bit definition forUSB_OTG_GRXFSIZ register ********************/
+#define USB_OTG_GRXFSIZ_RXFD ((uint32_t)0x0000FFFF) /*!< RxFIFO depth */
+
+/******************** Bit definition forUSB_OTG_DVBUSDIS register ********************/
+#define USB_OTG_DVBUSDIS_VBUSDT ((uint32_t)0x0000FFFF) /*!< Device VBUS discharge time */
+
+/******************** Bit definition for OTG register ********************/
+#define USB_OTG_NPTXFSA ((uint32_t)0x0000FFFF) /*!< Nonperiodic transmit RAM start address */
+#define USB_OTG_NPTXFD ((uint32_t)0xFFFF0000) /*!< Nonperiodic TxFIFO depth */
+#define USB_OTG_TX0FSA ((uint32_t)0x0000FFFF) /*!< Endpoint 0 transmit RAM start address */
+#define USB_OTG_TX0FD ((uint32_t)0xFFFF0000) /*!< Endpoint 0 TxFIFO depth */
+
+/******************** Bit definition forUSB_OTG_DVBUSPULSE register ********************/
+#define USB_OTG_DVBUSPULSE_DVBUSP ((uint32_t)0x00000FFF) /*!< Device VBUS pulsing time */
+
+/******************** Bit definition forUSB_OTG_GNPTXSTS register ********************/
+#define USB_OTG_GNPTXSTS_NPTXFSAV ((uint32_t)0x0000FFFF) /*!< Nonperiodic TxFIFO space available */
+
+#define USB_OTG_GNPTXSTS_NPTQXSAV ((uint32_t)0x00FF0000) /*!< Nonperiodic transmit request queue space available */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_4 ((uint32_t)0x00100000) /*!<Bit 4 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_5 ((uint32_t)0x00200000) /*!<Bit 5 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_6 ((uint32_t)0x00400000) /*!<Bit 6 */
+#define USB_OTG_GNPTXSTS_NPTQXSAV_7 ((uint32_t)0x00800000) /*!<Bit 7 */
+
+#define USB_OTG_GNPTXSTS_NPTXQTOP ((uint32_t)0x7F000000) /*!< Top of the nonperiodic transmit request queue */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_4 ((uint32_t)0x10000000) /*!<Bit 4 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_5 ((uint32_t)0x20000000) /*!<Bit 5 */
+#define USB_OTG_GNPTXSTS_NPTXQTOP_6 ((uint32_t)0x40000000) /*!<Bit 6 */
+
+/******************** Bit definition forUSB_OTG_DTHRCTL register ********************/
+#define USB_OTG_DTHRCTL_NONISOTHREN ((uint32_t)0x00000001) /*!< Nonisochronous IN endpoints threshold enable */
+#define USB_OTG_DTHRCTL_ISOTHREN ((uint32_t)0x00000002) /*!< ISO IN endpoint threshold enable */
+
+#define USB_OTG_DTHRCTL_TXTHRLEN ((uint32_t)0x000007FC) /*!< Transmit threshold length */
+#define USB_OTG_DTHRCTL_TXTHRLEN_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_2 ((uint32_t)0x00000010) /*!<Bit 2 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_3 ((uint32_t)0x00000020) /*!<Bit 3 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_4 ((uint32_t)0x00000040) /*!<Bit 4 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_5 ((uint32_t)0x00000080) /*!<Bit 5 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_6 ((uint32_t)0x00000100) /*!<Bit 6 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_7 ((uint32_t)0x00000200) /*!<Bit 7 */
+#define USB_OTG_DTHRCTL_TXTHRLEN_8 ((uint32_t)0x00000400) /*!<Bit 8 */
+#define USB_OTG_DTHRCTL_RXTHREN ((uint32_t)0x00010000) /*!< Receive threshold enable */
+
+#define USB_OTG_DTHRCTL_RXTHRLEN ((uint32_t)0x03FE0000) /*!< Receive threshold length */
+#define USB_OTG_DTHRCTL_RXTHRLEN_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_3 ((uint32_t)0x00100000) /*!<Bit 3 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_4 ((uint32_t)0x00200000) /*!<Bit 4 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_5 ((uint32_t)0x00400000) /*!<Bit 5 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_6 ((uint32_t)0x00800000) /*!<Bit 6 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_7 ((uint32_t)0x01000000) /*!<Bit 7 */
+#define USB_OTG_DTHRCTL_RXTHRLEN_8 ((uint32_t)0x02000000) /*!<Bit 8 */
+#define USB_OTG_DTHRCTL_ARPEN ((uint32_t)0x08000000) /*!< Arbiter parking enable */
+
+/******************** Bit definition forUSB_OTG_DIEPEMPMSK register ********************/
+#define USB_OTG_DIEPEMPMSK_INEPTXFEM ((uint32_t)0x0000FFFF) /*!< IN EP Tx FIFO empty interrupt mask bits */
+
+/******************** Bit definition forUSB_OTG_DEACHINT register ********************/
+#define USB_OTG_DEACHINT_IEP1INT ((uint32_t)0x00000002) /*!< IN endpoint 1interrupt bit */
+#define USB_OTG_DEACHINT_OEP1INT ((uint32_t)0x00020000) /*!< OUT endpoint 1 interrupt bit */
+
+/******************** Bit definition forUSB_OTG_GCCFG register ********************/
+#define USB_OTG_GCCFG_PWRDWN ((uint32_t)0x00010000) /*!< Power down */
+#define USB_OTG_GCCFG_I2CPADEN ((uint32_t)0x00020000) /*!< Enable I2C bus connection for the external I2C PHY interface */
+#define USB_OTG_GCCFG_VBUSASEN ((uint32_t)0x00040000) /*!< Enable the VBUS sensing device */
+#define USB_OTG_GCCFG_VBUSBSEN ((uint32_t)0x00080000) /*!< Enable the VBUS sensing device */
+#define USB_OTG_GCCFG_SOFOUTEN ((uint32_t)0x00100000) /*!< SOF output enable */
+#define USB_OTG_GCCFG_NOVBUSSENS ((uint32_t)0x00200000) /*!< VBUS sensing disable option */
+
+/******************** Bit definition forUSB_OTG_DEACHINTMSK register ********************/
+#define USB_OTG_DEACHINTMSK_IEP1INTM ((uint32_t)0x00000002) /*!< IN Endpoint 1 interrupt mask bit */
+#define USB_OTG_DEACHINTMSK_OEP1INTM ((uint32_t)0x00020000) /*!< OUT Endpoint 1 interrupt mask bit */
+
+/******************** Bit definition forUSB_OTG_CID register ********************/
+#define USB_OTG_CID_PRODUCT_ID ((uint32_t)0xFFFFFFFF) /*!< Product ID field */
+
+/******************** Bit definition forUSB_OTG_DIEPEACHMSK1 register ********************/
+#define USB_OTG_DIEPEACHMSK1_XFRCM ((uint32_t)0x00000001) /*!< Transfer completed interrupt mask */
+#define USB_OTG_DIEPEACHMSK1_EPDM ((uint32_t)0x00000002) /*!< Endpoint disabled interrupt mask */
+#define USB_OTG_DIEPEACHMSK1_TOM ((uint32_t)0x00000008) /*!< Timeout condition mask (nonisochronous endpoints) */
+#define USB_OTG_DIEPEACHMSK1_ITTXFEMSK ((uint32_t)0x00000010) /*!< IN token received when TxFIFO empty mask */
+#define USB_OTG_DIEPEACHMSK1_INEPNMM ((uint32_t)0x00000020) /*!< IN token received with EP mismatch mask */
+#define USB_OTG_DIEPEACHMSK1_INEPNEM ((uint32_t)0x00000040) /*!< IN endpoint NAK effective mask */
+#define USB_OTG_DIEPEACHMSK1_TXFURM ((uint32_t)0x00000100) /*!< FIFO underrun mask */
+#define USB_OTG_DIEPEACHMSK1_BIM ((uint32_t)0x00000200) /*!< BNA interrupt mask */
+#define USB_OTG_DIEPEACHMSK1_NAKM ((uint32_t)0x00002000) /*!< NAK interrupt mask */
+
+/******************** Bit definition forUSB_OTG_HPRT register ********************/
+#define USB_OTG_HPRT_PCSTS ((uint32_t)0x00000001) /*!< Port connect status */
+#define USB_OTG_HPRT_PCDET ((uint32_t)0x00000002) /*!< Port connect detected */
+#define USB_OTG_HPRT_PENA ((uint32_t)0x00000004) /*!< Port enable */
+#define USB_OTG_HPRT_PENCHNG ((uint32_t)0x00000008) /*!< Port enable/disable change */
+#define USB_OTG_HPRT_POCA ((uint32_t)0x00000010) /*!< Port overcurrent active */
+#define USB_OTG_HPRT_POCCHNG ((uint32_t)0x00000020) /*!< Port overcurrent change */
+#define USB_OTG_HPRT_PRES ((uint32_t)0x00000040) /*!< Port resume */
+#define USB_OTG_HPRT_PSUSP ((uint32_t)0x00000080) /*!< Port suspend */
+#define USB_OTG_HPRT_PRST ((uint32_t)0x00000100) /*!< Port reset */
+
+#define USB_OTG_HPRT_PLSTS ((uint32_t)0x00000C00) /*!< Port line status */
+#define USB_OTG_HPRT_PLSTS_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define USB_OTG_HPRT_PLSTS_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+#define USB_OTG_HPRT_PPWR ((uint32_t)0x00001000) /*!< Port power */
+
+#define USB_OTG_HPRT_PTCTL ((uint32_t)0x0001E000) /*!< Port test control */
+#define USB_OTG_HPRT_PTCTL_0 ((uint32_t)0x00002000) /*!<Bit 0 */
+#define USB_OTG_HPRT_PTCTL_1 ((uint32_t)0x00004000) /*!<Bit 1 */
+#define USB_OTG_HPRT_PTCTL_2 ((uint32_t)0x00008000) /*!<Bit 2 */
+#define USB_OTG_HPRT_PTCTL_3 ((uint32_t)0x00010000) /*!<Bit 3 */
+
+#define USB_OTG_HPRT_PSPD ((uint32_t)0x00060000) /*!< Port speed */
+#define USB_OTG_HPRT_PSPD_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define USB_OTG_HPRT_PSPD_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+
+/******************** Bit definition forUSB_OTG_DOEPEACHMSK1 register ********************/
+#define USB_OTG_DOEPEACHMSK1_XFRCM ((uint32_t)0x00000001) /*!< Transfer completed interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_EPDM ((uint32_t)0x00000002) /*!< Endpoint disabled interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_TOM ((uint32_t)0x00000008) /*!< Timeout condition mask */
+#define USB_OTG_DOEPEACHMSK1_ITTXFEMSK ((uint32_t)0x00000010) /*!< IN token received when TxFIFO empty mask */
+#define USB_OTG_DOEPEACHMSK1_INEPNMM ((uint32_t)0x00000020) /*!< IN token received with EP mismatch mask */
+#define USB_OTG_DOEPEACHMSK1_INEPNEM ((uint32_t)0x00000040) /*!< IN endpoint NAK effective mask */
+#define USB_OTG_DOEPEACHMSK1_TXFURM ((uint32_t)0x00000100) /*!< OUT packet error mask */
+#define USB_OTG_DOEPEACHMSK1_BIM ((uint32_t)0x00000200) /*!< BNA interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_BERRM ((uint32_t)0x00001000) /*!< Bubble error interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_NAKM ((uint32_t)0x00002000) /*!< NAK interrupt mask */
+#define USB_OTG_DOEPEACHMSK1_NYETM ((uint32_t)0x00004000) /*!< NYET interrupt mask */
+
+/******************** Bit definition forUSB_OTG_HPTXFSIZ register ********************/
+#define USB_OTG_HPTXFSIZ_PTXSA ((uint32_t)0x0000FFFF) /*!< Host periodic TxFIFO start address */
+#define USB_OTG_HPTXFSIZ_PTXFD ((uint32_t)0xFFFF0000) /*!< Host periodic TxFIFO depth */
+
+/******************** Bit definition forUSB_OTG_DIEPCTL register ********************/
+#define USB_OTG_DIEPCTL_MPSIZ ((uint32_t)0x000007FF) /*!< Maximum packet size */
+#define USB_OTG_DIEPCTL_USBAEP ((uint32_t)0x00008000) /*!< USB active endpoint */
+#define USB_OTG_DIEPCTL_EONUM_DPID ((uint32_t)0x00010000) /*!< Even/odd frame */
+#define USB_OTG_DIEPCTL_NAKSTS ((uint32_t)0x00020000) /*!< NAK status */
+
+#define USB_OTG_DIEPCTL_EPTYP ((uint32_t)0x000C0000) /*!< Endpoint type */
+#define USB_OTG_DIEPCTL_EPTYP_0 ((uint32_t)0x00040000) /*!<Bit 0 */
+#define USB_OTG_DIEPCTL_EPTYP_1 ((uint32_t)0x00080000) /*!<Bit 1 */
+#define USB_OTG_DIEPCTL_STALL ((uint32_t)0x00200000) /*!< STALL handshake */
+
+#define USB_OTG_DIEPCTL_TXFNUM ((uint32_t)0x03C00000) /*!< TxFIFO number */
+#define USB_OTG_DIEPCTL_TXFNUM_0 ((uint32_t)0x00400000) /*!<Bit 0 */
+#define USB_OTG_DIEPCTL_TXFNUM_1 ((uint32_t)0x00800000) /*!<Bit 1 */
+#define USB_OTG_DIEPCTL_TXFNUM_2 ((uint32_t)0x01000000) /*!<Bit 2 */
+#define USB_OTG_DIEPCTL_TXFNUM_3 ((uint32_t)0x02000000) /*!<Bit 3 */
+#define USB_OTG_DIEPCTL_CNAK ((uint32_t)0x04000000) /*!< Clear NAK */
+#define USB_OTG_DIEPCTL_SNAK ((uint32_t)0x08000000) /*!< Set NAK */
+#define USB_OTG_DIEPCTL_SD0PID_SEVNFRM ((uint32_t)0x10000000) /*!< Set DATA0 PID */
+#define USB_OTG_DIEPCTL_SODDFRM ((uint32_t)0x20000000) /*!< Set odd frame */
+#define USB_OTG_DIEPCTL_EPDIS ((uint32_t)0x40000000) /*!< Endpoint disable */
+#define USB_OTG_DIEPCTL_EPENA ((uint32_t)0x80000000) /*!< Endpoint enable */
+
+/******************** Bit definition forUSB_OTG_HCCHAR register ********************/
+#define USB_OTG_HCCHAR_MPSIZ ((uint32_t)0x000007FF) /*!< Maximum packet size */
+
+#define USB_OTG_HCCHAR_EPNUM ((uint32_t)0x00007800) /*!< Endpoint number */
+#define USB_OTG_HCCHAR_EPNUM_0 ((uint32_t)0x00000800) /*!<Bit 0 */
+#define USB_OTG_HCCHAR_EPNUM_1 ((uint32_t)0x00001000) /*!<Bit 1 */
+#define USB_OTG_HCCHAR_EPNUM_2 ((uint32_t)0x00002000) /*!<Bit 2 */
+#define USB_OTG_HCCHAR_EPNUM_3 ((uint32_t)0x00004000) /*!<Bit 3 */
+#define USB_OTG_HCCHAR_EPDIR ((uint32_t)0x00008000) /*!< Endpoint direction */
+#define USB_OTG_HCCHAR_LSDEV ((uint32_t)0x00020000) /*!< Low-speed device */
+
+#define USB_OTG_HCCHAR_EPTYP ((uint32_t)0x000C0000) /*!< Endpoint type */
+#define USB_OTG_HCCHAR_EPTYP_0 ((uint32_t)0x00040000) /*!<Bit 0 */
+#define USB_OTG_HCCHAR_EPTYP_1 ((uint32_t)0x00080000) /*!<Bit 1 */
+
+#define USB_OTG_HCCHAR_MC ((uint32_t)0x00300000) /*!< Multi Count (MC) / Error Count (EC) */
+#define USB_OTG_HCCHAR_MC_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define USB_OTG_HCCHAR_MC_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+
+#define USB_OTG_HCCHAR_DAD ((uint32_t)0x1FC00000) /*!< Device address */
+#define USB_OTG_HCCHAR_DAD_0 ((uint32_t)0x00400000) /*!<Bit 0 */
+#define USB_OTG_HCCHAR_DAD_1 ((uint32_t)0x00800000) /*!<Bit 1 */
+#define USB_OTG_HCCHAR_DAD_2 ((uint32_t)0x01000000) /*!<Bit 2 */
+#define USB_OTG_HCCHAR_DAD_3 ((uint32_t)0x02000000) /*!<Bit 3 */
+#define USB_OTG_HCCHAR_DAD_4 ((uint32_t)0x04000000) /*!<Bit 4 */
+#define USB_OTG_HCCHAR_DAD_5 ((uint32_t)0x08000000) /*!<Bit 5 */
+#define USB_OTG_HCCHAR_DAD_6 ((uint32_t)0x10000000) /*!<Bit 6 */
+#define USB_OTG_HCCHAR_ODDFRM ((uint32_t)0x20000000) /*!< Odd frame */
+#define USB_OTG_HCCHAR_CHDIS ((uint32_t)0x40000000) /*!< Channel disable */
+#define USB_OTG_HCCHAR_CHENA ((uint32_t)0x80000000) /*!< Channel enable */
+
+/******************** Bit definition forUSB_OTG_HCSPLT register ********************/
+
+#define USB_OTG_HCSPLT_PRTADDR ((uint32_t)0x0000007F) /*!< Port address */
+#define USB_OTG_HCSPLT_PRTADDR_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define USB_OTG_HCSPLT_PRTADDR_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define USB_OTG_HCSPLT_PRTADDR_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define USB_OTG_HCSPLT_PRTADDR_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define USB_OTG_HCSPLT_PRTADDR_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define USB_OTG_HCSPLT_PRTADDR_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define USB_OTG_HCSPLT_PRTADDR_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+
+#define USB_OTG_HCSPLT_HUBADDR ((uint32_t)0x00003F80) /*!< Hub address */
+#define USB_OTG_HCSPLT_HUBADDR_0 ((uint32_t)0x00000080) /*!<Bit 0 */
+#define USB_OTG_HCSPLT_HUBADDR_1 ((uint32_t)0x00000100) /*!<Bit 1 */
+#define USB_OTG_HCSPLT_HUBADDR_2 ((uint32_t)0x00000200) /*!<Bit 2 */
+#define USB_OTG_HCSPLT_HUBADDR_3 ((uint32_t)0x00000400) /*!<Bit 3 */
+#define USB_OTG_HCSPLT_HUBADDR_4 ((uint32_t)0x00000800) /*!<Bit 4 */
+#define USB_OTG_HCSPLT_HUBADDR_5 ((uint32_t)0x00001000) /*!<Bit 5 */
+#define USB_OTG_HCSPLT_HUBADDR_6 ((uint32_t)0x00002000) /*!<Bit 6 */
+
+#define USB_OTG_HCSPLT_XACTPOS ((uint32_t)0x0000C000) /*!< XACTPOS */
+#define USB_OTG_HCSPLT_XACTPOS_0 ((uint32_t)0x00004000) /*!<Bit 0 */
+#define USB_OTG_HCSPLT_XACTPOS_1 ((uint32_t)0x00008000) /*!<Bit 1 */
+#define USB_OTG_HCSPLT_COMPLSPLT ((uint32_t)0x00010000) /*!< Do complete split */
+#define USB_OTG_HCSPLT_SPLITEN ((uint32_t)0x80000000) /*!< Split enable */
+
+/******************** Bit definition forUSB_OTG_HCINT register ********************/
+#define USB_OTG_HCINT_XFRC ((uint32_t)0x00000001) /*!< Transfer completed */
+#define USB_OTG_HCINT_CHH ((uint32_t)0x00000002) /*!< Channel halted */
+#define USB_OTG_HCINT_AHBERR ((uint32_t)0x00000004) /*!< AHB error */
+#define USB_OTG_HCINT_STALL ((uint32_t)0x00000008) /*!< STALL response received interrupt */
+#define USB_OTG_HCINT_NAK ((uint32_t)0x00000010) /*!< NAK response received interrupt */
+#define USB_OTG_HCINT_ACK ((uint32_t)0x00000020) /*!< ACK response received/transmitted interrupt */
+#define USB_OTG_HCINT_NYET ((uint32_t)0x00000040) /*!< Response received interrupt */
+#define USB_OTG_HCINT_TXERR ((uint32_t)0x00000080) /*!< Transaction error */
+#define USB_OTG_HCINT_BBERR ((uint32_t)0x00000100) /*!< Babble error */
+#define USB_OTG_HCINT_FRMOR ((uint32_t)0x00000200) /*!< Frame overrun */
+#define USB_OTG_HCINT_DTERR ((uint32_t)0x00000400) /*!< Data toggle error */
+
+/******************** Bit definition forUSB_OTG_DIEPINT register ********************/
+#define USB_OTG_DIEPINT_XFRC ((uint32_t)0x00000001) /*!< Transfer completed interrupt */
+#define USB_OTG_DIEPINT_EPDISD ((uint32_t)0x00000002) /*!< Endpoint disabled interrupt */
+#define USB_OTG_DIEPINT_TOC ((uint32_t)0x00000008) /*!< Timeout condition */
+#define USB_OTG_DIEPINT_ITTXFE ((uint32_t)0x00000010) /*!< IN token received when TxFIFO is empty */
+#define USB_OTG_DIEPINT_INEPNE ((uint32_t)0x00000040) /*!< IN endpoint NAK effective */
+#define USB_OTG_DIEPINT_TXFE ((uint32_t)0x00000080) /*!< Transmit FIFO empty */
+#define USB_OTG_DIEPINT_TXFIFOUDRN ((uint32_t)0x00000100) /*!< Transmit Fifo Underrun */
+#define USB_OTG_DIEPINT_BNA ((uint32_t)0x00000200) /*!< Buffer not available interrupt */
+#define USB_OTG_DIEPINT_PKTDRPSTS ((uint32_t)0x00000800) /*!< Packet dropped status */
+#define USB_OTG_DIEPINT_BERR ((uint32_t)0x00001000) /*!< Babble error interrupt */
+#define USB_OTG_DIEPINT_NAK ((uint32_t)0x00002000) /*!< NAK interrupt */
+
+/******************** Bit definition forUSB_OTG_HCINTMSK register ********************/
+#define USB_OTG_HCINTMSK_XFRCM ((uint32_t)0x00000001) /*!< Transfer completed mask */
+#define USB_OTG_HCINTMSK_CHHM ((uint32_t)0x00000002) /*!< Channel halted mask */
+#define USB_OTG_HCINTMSK_AHBERR ((uint32_t)0x00000004) /*!< AHB error */
+#define USB_OTG_HCINTMSK_STALLM ((uint32_t)0x00000008) /*!< STALL response received interrupt mask */
+#define USB_OTG_HCINTMSK_NAKM ((uint32_t)0x00000010) /*!< NAK response received interrupt mask */
+#define USB_OTG_HCINTMSK_ACKM ((uint32_t)0x00000020) /*!< ACK response received/transmitted interrupt mask */
+#define USB_OTG_HCINTMSK_NYET ((uint32_t)0x00000040) /*!< response received interrupt mask */
+#define USB_OTG_HCINTMSK_TXERRM ((uint32_t)0x00000080) /*!< Transaction error mask */
+#define USB_OTG_HCINTMSK_BBERRM ((uint32_t)0x00000100) /*!< Babble error mask */
+#define USB_OTG_HCINTMSK_FRMORM ((uint32_t)0x00000200) /*!< Frame overrun mask */
+#define USB_OTG_HCINTMSK_DTERRM ((uint32_t)0x00000400) /*!< Data toggle error mask */
+
+/******************** Bit definition for USB_OTG_DIEPTSIZ register ********************/
+
+#define USB_OTG_DIEPTSIZ_XFRSIZ ((uint32_t)0x0007FFFF) /*!< Transfer size */
+#define USB_OTG_DIEPTSIZ_PKTCNT ((uint32_t)0x1FF80000) /*!< Packet count */
+#define USB_OTG_DIEPTSIZ_MULCNT ((uint32_t)0x60000000) /*!< Packet count */
+/******************** Bit definition forUSB_OTG_HCTSIZ register ********************/
+#define USB_OTG_HCTSIZ_XFRSIZ ((uint32_t)0x0007FFFF) /*!< Transfer size */
+#define USB_OTG_HCTSIZ_PKTCNT ((uint32_t)0x1FF80000) /*!< Packet count */
+#define USB_OTG_HCTSIZ_DOPING ((uint32_t)0x80000000) /*!< Do PING */
+#define USB_OTG_HCTSIZ_DPID ((uint32_t)0x60000000) /*!< Data PID */
+#define USB_OTG_HCTSIZ_DPID_0 ((uint32_t)0x20000000) /*!<Bit 0 */
+#define USB_OTG_HCTSIZ_DPID_1 ((uint32_t)0x40000000) /*!<Bit 1 */
+
+/******************** Bit definition forUSB_OTG_DIEPDMA register ********************/
+#define USB_OTG_DIEPDMA_DMAADDR ((uint32_t)0xFFFFFFFF) /*!< DMA address */
+
+/******************** Bit definition forUSB_OTG_HCDMA register ********************/
+#define USB_OTG_HCDMA_DMAADDR ((uint32_t)0xFFFFFFFF) /*!< DMA address */
+
+/******************** Bit definition forUSB_OTG_DTXFSTS register ********************/
+#define USB_OTG_DTXFSTS_INEPTFSAV ((uint32_t)0x0000FFFF) /*!< IN endpoint TxFIFO space avail */
+
+/******************** Bit definition forUSB_OTG_DIEPTXF register ********************/
+#define USB_OTG_DIEPTXF_INEPTXSA ((uint32_t)0x0000FFFF) /*!< IN endpoint FIFOx transmit RAM start address */
+#define USB_OTG_DIEPTXF_INEPTXFD ((uint32_t)0xFFFF0000) /*!< IN endpoint TxFIFO depth */
+
+/******************** Bit definition forUSB_OTG_DOEPCTL register ********************/
+
+#define USB_OTG_DOEPCTL_MPSIZ ((uint32_t)0x000007FF) /*!< Maximum packet size */ /*!<Bit 1 */
+#define USB_OTG_DOEPCTL_USBAEP ((uint32_t)0x00008000) /*!< USB active endpoint */
+#define USB_OTG_DOEPCTL_NAKSTS ((uint32_t)0x00020000) /*!< NAK status */
+#define USB_OTG_DOEPCTL_SD0PID_SEVNFRM ((uint32_t)0x10000000) /*!< Set DATA0 PID */
+#define USB_OTG_DOEPCTL_SODDFRM ((uint32_t)0x20000000) /*!< Set odd frame */
+#define USB_OTG_DOEPCTL_EPTYP ((uint32_t)0x000C0000) /*!< Endpoint type */
+#define USB_OTG_DOEPCTL_EPTYP_0 ((uint32_t)0x00040000) /*!<Bit 0 */
+#define USB_OTG_DOEPCTL_EPTYP_1 ((uint32_t)0x00080000) /*!<Bit 1 */
+#define USB_OTG_DOEPCTL_SNPM ((uint32_t)0x00100000) /*!< Snoop mode */
+#define USB_OTG_DOEPCTL_STALL ((uint32_t)0x00200000) /*!< STALL handshake */
+#define USB_OTG_DOEPCTL_CNAK ((uint32_t)0x04000000) /*!< Clear NAK */
+#define USB_OTG_DOEPCTL_SNAK ((uint32_t)0x08000000) /*!< Set NAK */
+#define USB_OTG_DOEPCTL_EPDIS ((uint32_t)0x40000000) /*!< Endpoint disable */
+#define USB_OTG_DOEPCTL_EPENA ((uint32_t)0x80000000) /*!< Endpoint enable */
+
+/******************** Bit definition forUSB_OTG_DOEPINT register ********************/
+#define USB_OTG_DOEPINT_XFRC ((uint32_t)0x00000001) /*!< Transfer completed interrupt */
+#define USB_OTG_DOEPINT_EPDISD ((uint32_t)0x00000002) /*!< Endpoint disabled interrupt */
+#define USB_OTG_DOEPINT_STUP ((uint32_t)0x00000008) /*!< SETUP phase done */
+#define USB_OTG_DOEPINT_OTEPDIS ((uint32_t)0x00000010) /*!< OUT token received when endpoint disabled */
+#define USB_OTG_DOEPINT_B2BSTUP ((uint32_t)0x00000040) /*!< Back-to-back SETUP packets received */
+#define USB_OTG_DOEPINT_NYET ((uint32_t)0x00004000) /*!< NYET interrupt */
+
+/******************** Bit definition forUSB_OTG_DOEPTSIZ register ********************/
+
+#define USB_OTG_DOEPTSIZ_XFRSIZ ((uint32_t)0x0007FFFF) /*!< Transfer size */
+#define USB_OTG_DOEPTSIZ_PKTCNT ((uint32_t)0x1FF80000) /*!< Packet count */
+
+#define USB_OTG_DOEPTSIZ_STUPCNT ((uint32_t)0x60000000) /*!< SETUP packet count */
+#define USB_OTG_DOEPTSIZ_STUPCNT_0 ((uint32_t)0x20000000) /*!<Bit 0 */
+#define USB_OTG_DOEPTSIZ_STUPCNT_1 ((uint32_t)0x40000000) /*!<Bit 1 */
+
+/******************** Bit definition for PCGCCTL register ********************/
+#define USB_OTG_PCGCCTL_STOPCLK ((uint32_t)0x00000001) /*!< SETUP packet count */
+#define USB_OTG_PCGCCTL_GATECLK ((uint32_t)0x00000002) /*!<Bit 0 */
+#define USB_OTG_PCGCCTL_PHYSUSP ((uint32_t)0x00000010) /*!<Bit 1 */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_macros
+ * @{
+ */
+
+/******************************* ADC Instances ********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
+
+/******************************* CRC Instances ********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+/******************************** DMA Instances *******************************/
+#define IS_DMA_STREAM_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Stream0) || \
+ ((INSTANCE) == DMA1_Stream1) || \
+ ((INSTANCE) == DMA1_Stream2) || \
+ ((INSTANCE) == DMA1_Stream3) || \
+ ((INSTANCE) == DMA1_Stream4) || \
+ ((INSTANCE) == DMA1_Stream5) || \
+ ((INSTANCE) == DMA1_Stream6) || \
+ ((INSTANCE) == DMA1_Stream7) || \
+ ((INSTANCE) == DMA2_Stream0) || \
+ ((INSTANCE) == DMA2_Stream1) || \
+ ((INSTANCE) == DMA2_Stream2) || \
+ ((INSTANCE) == DMA2_Stream3) || \
+ ((INSTANCE) == DMA2_Stream4) || \
+ ((INSTANCE) == DMA2_Stream5) || \
+ ((INSTANCE) == DMA2_Stream6) || \
+ ((INSTANCE) == DMA2_Stream7))
+
+/******************************* GPIO Instances *******************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOE) || \
+ ((INSTANCE) == GPIOH))
+
+/******************************** I2C Instances *******************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
+ ((INSTANCE) == I2C2) || \
+ ((INSTANCE) == I2C3))
+
+/******************************** I2S Instances *******************************/
+#define IS_I2S_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3) || \
+ ((INSTANCE) == SPI4) || \
+ ((INSTANCE) == SPI5))
+
+/*************************** I2S Extended Instances ***************************/
+#define IS_I2S_INSTANCE_EXT(PERIPH) (((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3) || \
+ ((INSTANCE) == I2S2ext) || \
+ ((INSTANCE) == I2S3ext))
+
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
+
+/******************************** SPI Instances *******************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3) || \
+ ((INSTANCE) == SPI4) || \
+ ((INSTANCE) == SPI5))
+/*************************** SPI Extended Instances ***************************/
+#define IS_SPI_ALL_INSTANCE_EXT(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3) || \
+ ((INSTANCE) == SPI4) || \
+ ((INSTANCE) == SPI5) || \
+ ((INSTANCE) == I2S2ext) || \
+ ((INSTANCE) == I2S3ext))
+
+/****************** TIM Instances : All supported instances *******************/
+#define IS_TIM_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9) || \
+ ((INSTANCE) == TIM10) || \
+ ((INSTANCE) == TIM11))
+
+/************* TIM Instances : at least 1 capture/compare channel *************/
+#define IS_TIM_CC1_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9) || \
+ ((INSTANCE) == TIM10) || \
+ ((INSTANCE) == TIM11))
+
+/************ TIM Instances : at least 2 capture/compare channels *************/
+#define IS_TIM_CC2_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9))
+
+/************ TIM Instances : at least 3 capture/compare channels *************/
+#define IS_TIM_CC3_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/************ TIM Instances : at least 4 capture/compare channels *************/
+#define IS_TIM_CC4_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/******************** TIM Instances : Advanced-control timers *****************/
+#define IS_TIM_ADVANCED_INSTANCE(INSTANCE) ((INSTANCE) == TIM1)
+
+/******************* TIM Instances : Timer input XOR function *****************/
+#define IS_TIM_XOR_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/****************** TIM Instances : DMA requests generation (UDE) *************/
+#define IS_TIM_DMA_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/************ TIM Instances : DMA requests generation (CCxDE) *****************/
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/************ TIM Instances : DMA requests generation (COMDE) *****************/
+#define IS_TIM_CCDMA_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/******************** TIM Instances : DMA burst feature ***********************/
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/****** TIM Instances : master mode available (TIMx_CR2.MMS available )********/
+#define IS_TIM_MASTER_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9))
+
+/*********** TIM Instances : Slave mode available (TIMx_SMCR available )*******/
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM9))
+
+/********************** TIM Instances : 32 bit Counter ************************/
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE)(((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM5))
+
+/***************** TIM Instances : external trigger input availabe ************/
+#define IS_TIM_ETR_INSTANCE(INSTANCE) (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM5))
+
+/****************** TIM Instances : remapping capability **********************/
+#define IS_TIM_REMAP_INSTANCE(INSTANCE) (((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM5) || \
+ ((INSTANCE) == TIM11))
+
+/******************* TIM Instances : output(s) available **********************/
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM2) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM3) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM4) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM5) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM9) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))) \
+ || \
+ (((INSTANCE) == TIM10) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM11) && \
+ (((CHANNEL) == TIM_CHANNEL_1))))
+
+/************ TIM Instances : complementary output(s) available ***************/
+#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))))
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/********************* UART Instances : Smard card mode ***********************/
+#define IS_SMARTCARD_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/*********************** UART Instances : IRDA mode ***************************/
+#define IS_IRDA_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART6))
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F411xE_H */
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,221 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx.h
+ * @author MCD Application Team
+ * @version V2.1.0
+ * @date 19-June-2014
+ * @brief CMSIS STM32F4xx Device Peripheral Access Layer Header File.
+ *
+ * The file is the unique include file that the application programmer
+ * is using in the C source code, usually in main.c. This file contains:
+ * - Configuration section that allows to select:
+ * - The STM32F4xx device used in the target application
+ * - To use or not the peripherals drivers in application code(i.e.
+ * code will be based on direct access to peripherals registers
+ * rather than drivers API), this option is controlled by
+ * "#define USE_HAL_DRIVER"
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f4xx
+ * @{
+ */
+
+#ifndef __STM32F4xx_H
+#define __STM32F4xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/* Uncomment the line below according to the target STM32 device used in your
+ application
+ */
+#if !defined (STM32F405xx) && !defined (STM32F415xx) && !defined (STM32F407xx) && !defined (STM32F417xx) && \
+ !defined (STM32F427xx) && !defined (STM32F437xx) && !defined (STM32F429xx) && !defined (STM32F439xx) && \
+ !defined (STM32F401xC) && !defined (STM32F401xE) && !defined (STM32F411xE)
+ /* #define STM32F405xx */ /*!< STM32F405RG, STM32F405VG and STM32F405ZG Devices */
+ /* #define STM32F415xx */ /*!< STM32F415RG, STM32F415VG and STM32F415ZG Devices */
+ /* #define STM32F407xx */ /*!< STM32F407VG, STM32F407VE, STM32F407ZG, STM32F407ZE, STM32F407IG and STM32F407IE Devices */
+ /* #define STM32F417xx */ /*!< STM32F417VG, STM32F417VE, STM32F417ZG, STM32F417ZE, STM32F417IG and STM32F417IE Devices */
+ /* #define STM32F427xx */ /*!< STM32F427VG, STM32F427VI, STM32F427ZG, STM32F427ZI, STM32F427IG and STM32F427II Devices */
+ /* #define STM32F437xx */ /*!< STM32F437VG, STM32F437VI, STM32F437ZG, STM32F437ZI, STM32F437IG and STM32F437II Devices */
+ /* #define STM32F429xx */ /*!< STM32F429VG, STM32F429VI, STM32F429ZG, STM32F429ZI, STM32F429BG, STM32F429BI, STM32F429NG,
+ STM32F439NI, STM32F429IG and STM32F429II Devices */
+ /* #define STM32F439xx */ /*!< STM32F439VG, STM32F439VI, STM32F439ZG, STM32F439ZI, STM32F439BG, STM32F439BI, STM32F439NG,
+ STM32F439NI, STM32F439IG and STM32F439II Devices */
+ /* #define STM32F401xC */ /*!< STM32F401CB, STM32F401CC, STM32F401RB, STM32F401RC, STM32F401VB and STM32F401VC Devices */
+ /* #define STM32F401xE */ /*!< STM32F401CD, STM32F401RD, STM32F401VD, STM32F401CE, STM32F401RE and STM32F401VE Devices */
+#define STM32F411xE /*!< STM32F411CD, STM32F411RD, STM32F411VD, STM32F411CE, STM32F411RE and STM32F411VE Devices */
+#endif
+
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+ */
+#if !defined (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+#define USE_HAL_DRIVER
+#endif /* USE_HAL_DRIVER */
+
+/**
+ * @brief CMSIS Device version number V2.1.0
+ */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION_SUB1 (0x01) /*!< [23:16] sub1 version */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32F4xx_CMSIS_DEVICE_VERSION ((__STM32F4xx_CMSIS_DEVICE_VERSION_MAIN << 24)\
+ |(__STM32F4xx_CMSIS_DEVICE_VERSION_SUB1 << 16)\
+ |(__STM32F4xx_CMSIS_DEVICE_VERSION_SUB2 << 8 )\
+ |(__STM32F4xx_CMSIS_DEVICE_VERSION))
+
+/**
+ * @}
+ */
+
+/** @addtogroup Device_Included
+ * @{
+ */
+
+#if defined(STM32F405xx)
+ #include "stm32f405xx.h"
+#elif defined(STM32F415xx)
+ #include "stm32f415xx.h"
+#elif defined(STM32F407xx)
+ #include "stm32f407xx.h"
+#elif defined(STM32F417xx)
+ #include "stm32f417xx.h"
+#elif defined(STM32F427xx)
+ #include "stm32f427xx.h"
+#elif defined(STM32F437xx)
+ #include "stm32f437xx.h"
+#elif defined(STM32F429xx)
+ #include "stm32f429xx.h"
+#elif defined(STM32F439xx)
+ #include "stm32f439xx.h"
+#elif defined(STM32F401xC)
+ #include "stm32f401xc.h"
+#elif defined(STM32F401xE)
+ #include "stm32f401xe.h"
+#elif defined(STM32F411xE)
+ #include "stm32f411xe.h"
+#else
+ #error "Please select first the target STM32F4xx device used in your application (in stm32f4xx.h file)"
+#endif
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_types
+ * @{
+ */
+typedef enum
+{
+ RESET = 0,
+ SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+ DISABLE = 0,
+ ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+ ERROR = 0,
+ SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
+
+
+/**
+ * @}
+ */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f4xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F4xx_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,194 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief This file contains all the functions prototypes for the HAL
+ * module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_H
+#define __STM32F4xx_HAL_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_conf.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HAL
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Freeze/Unfreeze Peripherals in Debug mode
+ */
+#define __HAL_FREEZE_TIM2_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_FREEZE_TIM3_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#define __HAL_FREEZE_TIM4_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM4_STOP))
+#define __HAL_FREEZE_TIM5_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM5_STOP))
+#define __HAL_FREEZE_TIM6_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_FREEZE_TIM7_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#define __HAL_FREEZE_TIM12_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM12_STOP))
+#define __HAL_FREEZE_TIM13_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM13_STOP))
+#define __HAL_FREEZE_TIM14_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#define __HAL_FREEZE_RTC_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_FREEZE_WWDG_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_FREEZE_IWDG_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
+#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
+#define __HAL_FREEZE_CAN1_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN1_STOP))
+#define __HAL_FREEZE_CAN2_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN2_STOP))
+#define __HAL_FREEZE_TIM1_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#define __HAL_FREEZE_TIM8_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM8_STOP))
+#define __HAL_FREEZE_TIM9_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM9_STOP))
+#define __HAL_FREEZE_TIM10_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM10_STOP))
+#define __HAL_FREEZE_TIM11_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM11_STOP))
+
+#define __HAL_UNFREEZE_TIM2_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_UNFREEZE_TIM3_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#define __HAL_UNFREEZE_TIM4_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM4_STOP))
+#define __HAL_UNFREEZE_TIM5_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM5_STOP))
+#define __HAL_UNFREEZE_TIM6_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_UNFREEZE_TIM7_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#define __HAL_UNFREEZE_TIM12_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM12_STOP))
+#define __HAL_UNFREEZE_TIM13_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM13_STOP))
+#define __HAL_UNFREEZE_TIM14_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#define __HAL_UNFREEZE_RTC_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_UNFREEZE_WWDG_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_UNFREEZE_IWDG_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
+#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
+#define __HAL_UNFREEZE_CAN1_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN1_STOP))
+#define __HAL_UNFREEZE_CAN2_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN2_STOP))
+#define __HAL_UNFREEZE_TIM1_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#define __HAL_UNFREEZE_TIM8_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM8_STOP))
+#define __HAL_UNFREEZE_TIM9_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM9_STOP))
+#define __HAL_UNFREEZE_TIM10_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM10_STOP))
+#define __HAL_UNFREEZE_TIM11_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM11_STOP))
+
+/** @brief Main Flash memory mapped at 0x00000000
+ */
+#define __HAL_REMAPMEMORY_FLASH() (SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE))
+
+/** @brief System Flash memory mapped at 0x00000000
+ */
+#define __HAL_REMAPMEMORY_SYSTEMFLASH() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+ SYSCFG->MEMRMP |= SYSCFG_MEMRMP_MEM_MODE_0;\
+ }while(0);
+
+/** @brief Embedded SRAM mapped at 0x00000000
+ */
+#define __HAL_REMAPMEMORY_SRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+ SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_0 | SYSCFG_MEMRMP_MEM_MODE_1);\
+ }while(0);
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+/** @brief FSMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
+ */
+#define __HAL_REMAPMEMORY_FSMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+ SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\
+ }while(0);
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+/** @brief FMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000
+ */
+#define __HAL_REMAPMEMORY_FMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+ SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\
+ }while(0);
+
+/** @brief FMC/SDRAM Bank 1 and 2 mapped at 0x00000000
+ */
+#define __HAL_REMAPMEMORY_FMC_SDRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\
+ SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_2);\
+ }while(0);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions ******************************/
+HAL_StatusTypeDef HAL_Init(void);
+HAL_StatusTypeDef HAL_DeInit(void);
+void HAL_MspInit(void);
+void HAL_MspDeInit(void);
+HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);
+
+/* Peripheral Control functions ************************************************/
+void HAL_IncTick(void);
+void HAL_Delay(__IO uint32_t Delay);
+uint32_t HAL_GetTick(void);
+void HAL_SuspendTick(void);
+void HAL_ResumeTick(void);
+uint32_t HAL_GetHalVersion(void);
+uint32_t HAL_GetREVID(void);
+uint32_t HAL_GetDEVID(void);
+void HAL_EnableDBGSleepMode(void);
+void HAL_DisableDBGSleepMode(void);
+void HAL_EnableDBGStopMode(void);
+void HAL_DisableDBGStopMode(void);
+void HAL_EnableDBGStandbyMode(void);
+void HAL_DisableDBGStandbyMode(void);
+void HAL_EnableCompensationCell(void);
+void HAL_DisableCompensationCell(void);
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+void HAL_EnableMemorySwappingBank(void);
+void HAL_DisableMemorySwappingBank(void);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_adc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,745 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_adc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of ADC HAL extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_ADC_H
+#define __STM32F4xx_ADC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup ADC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_ADC_STATE_RESET = 0x00, /*!< ADC not yet initialized or disabled */
+ HAL_ADC_STATE_READY = 0x01, /*!< ADC peripheral ready for use */
+ HAL_ADC_STATE_BUSY = 0x02, /*!< An internal process is ongoing */
+ HAL_ADC_STATE_BUSY_REG = 0x12, /*!< Regular conversion is ongoing */
+ HAL_ADC_STATE_BUSY_INJ = 0x22, /*!< Injected conversion is ongoing */
+ HAL_ADC_STATE_BUSY_INJ_REG = 0x32, /*!< Injected and regular conversion are ongoing */
+ HAL_ADC_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_ADC_STATE_ERROR = 0x04, /*!< ADC state error */
+ HAL_ADC_STATE_EOC = 0x05, /*!< Conversion is completed */
+ HAL_ADC_STATE_EOC_REG = 0x15, /*!< Regular conversion is completed */
+ HAL_ADC_STATE_EOC_INJ = 0x25, /*!< Injected conversion is completed */
+ HAL_ADC_STATE_EOC_INJ_REG = 0x35, /*!< Injected and regular conversion are completed */
+ HAL_ADC_STATE_AWD = 0x06 /*!< ADC state analog watchdog */
+
+}HAL_ADC_StateTypeDef;
+
+/**
+ * @brief ADC Init structure definition
+ */
+typedef struct
+{
+ uint32_t ClockPrescaler; /*!< Select the frequency of the clock to the ADC. The clock is common for
+ all the ADCs.
+ This parameter can be a value of @ref ADC_ClockPrescaler */
+ uint32_t Resolution; /*!< Configures the ADC resolution dual mode.
+ This parameter can be a value of @ref ADC_Resolution */
+ uint32_t DataAlign; /*!< Specifies whether the ADC data alignment is left or right.
+ This parameter can be a value of @ref ADC_data_align */
+ uint32_t ScanConvMode; /*!< Specifies whether the conversion is performed in Scan (multi channels) or
+ Single (one channel) mode.
+ This parameter can be set to ENABLE or DISABLE */
+ uint32_t EOCSelection; /*!< Specifies whether the EOC flag is set
+ at the end of single channel conversion or at the end of all conversions.
+ This parameter can be a value of @ref ADC_EOCSelection */
+ uint32_t ContinuousConvMode; /*!< Specifies whether the conversion is performed in Continuous or Single mode.
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t DMAContinuousRequests; /*!< Specifies whether the DMA requests is performed in Continuous or in Single mode.
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t NbrOfConversion; /*!< Specifies the number of ADC conversions that will be done using the sequencer for
+ regular channel group.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 16. */
+ uint32_t DiscontinuousConvMode; /*!< Specifies whether the conversion is performed in Discontinuous or not
+ for regular channels.
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t NbrOfDiscConversion; /*!< Specifies the number of ADC discontinuous conversions that will be done
+ using the sequencer for regular channel group.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 8. */
+ uint32_t ExternalTrigConvEdge; /*!< Select the external trigger edge and enable the trigger of a regular group.
+ This parameter can be a value of @ref ADC_External_trigger_edge_Regular */
+ uint32_t ExternalTrigConv; /*!< Select the external event used to trigger the start of conversion of a regular group.
+ This parameter can be a value of @ref ADC_External_trigger_Source_Regular */
+}ADC_InitTypeDef;
+
+/**
+ * @brief ADC handle Structure definition
+ */
+typedef struct
+{
+ ADC_TypeDef *Instance; /*!< Register base address */
+
+ ADC_InitTypeDef Init; /*!< ADC required parameters */
+
+ __IO uint32_t NbrOfCurrentConversionRank; /*!< ADC number of current conversion rank */
+
+ DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */
+
+ HAL_LockTypeDef Lock; /*!< ADC locking object */
+
+ __IO HAL_ADC_StateTypeDef State; /*!< ADC communication state */
+
+ __IO uint32_t ErrorCode; /*!< ADC Error code */
+}ADC_HandleTypeDef;
+
+/**
+ * @brief ADC Configuration regular Channel structure definition
+ */
+typedef struct
+{
+ uint32_t Channel; /*!< The ADC channel to configure.
+ This parameter can be a value of @ref ADC_channels */
+ uint32_t Rank; /*!< The rank in the regular group sequencer.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 16 */
+ uint32_t SamplingTime; /*!< The sample time value to be set for the selected channel.
+ This parameter can be a value of @ref ADC_sampling_times */
+ uint32_t Offset; /*!< Reserved for future use, can be set to 0 */
+}ADC_ChannelConfTypeDef;
+
+/**
+ * @brief ADC Configuration multi-mode structure definition
+ */
+typedef struct
+{
+ uint32_t WatchdogMode; /*!< Configures the ADC analog watchdog mode.
+ This parameter can be a value of @ref ADC_analog_watchdog_selection */
+ uint32_t HighThreshold; /*!< Configures the ADC analog watchdog High threshold value.
+ This parameter must be a 12-bit value. */
+ uint32_t LowThreshold; /*!< Configures the ADC analog watchdog High threshold value.
+ This parameter must be a 12-bit value. */
+ uint32_t Channel; /*!< Configures ADC channel for the analog watchdog.
+ This parameter has an effect only if watchdog mode is configured on single channel
+ This parameter can be a value of @ref ADC_channels */
+ uint32_t ITMode; /*!< Specifies whether the analog watchdog is configured
+ is interrupt mode or in polling mode.
+ This parameter can be set to ENABLE or DISABLE */
+ uint32_t WatchdogNumber; /*!< Reserved for future use, can be set to 0 */
+}ADC_AnalogWDGConfTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup ADC_Exported_Constants
+ * @{
+ */
+
+
+/** @defgroup ADC_Error_Code
+ * @{
+ */
+
+#define HAL_ADC_ERROR_NONE ((uint32_t)0x00) /*!< No error */
+#define HAL_ADC_ERROR_OVR ((uint32_t)0x01) /*!< OVR error */
+#define HAL_ADC_ERROR_DMA ((uint32_t)0x02) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
+
+/** @defgroup ADC_ClockPrescaler
+ * @{
+ */
+#define ADC_CLOCKPRESCALER_PCLK_DIV2 ((uint32_t)0x00000000)
+#define ADC_CLOCKPRESCALER_PCLK_DIV4 ((uint32_t)ADC_CCR_ADCPRE_0)
+#define ADC_CLOCKPRESCALER_PCLK_DIV6 ((uint32_t)ADC_CCR_ADCPRE_1)
+#define ADC_CLOCKPRESCALER_PCLK_DIV8 ((uint32_t)ADC_CCR_ADCPRE)
+#define IS_ADC_CLOCKPRESCALER(ADC_CLOCK) (((ADC_CLOCK) == ADC_CLOCKPRESCALER_PCLK_DIV2) || \
+ ((ADC_CLOCK) == ADC_CLOCKPRESCALER_PCLK_DIV4) || \
+ ((ADC_CLOCK) == ADC_CLOCKPRESCALER_PCLK_DIV6) || \
+ ((ADC_CLOCK) == ADC_CLOCKPRESCALER_PCLK_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_delay_between_2_sampling_phases
+ * @{
+ */
+#define ADC_TWOSAMPLINGDELAY_5CYCLES ((uint32_t)0x00000000)
+#define ADC_TWOSAMPLINGDELAY_6CYCLES ((uint32_t)ADC_CCR_DELAY_0)
+#define ADC_TWOSAMPLINGDELAY_7CYCLES ((uint32_t)ADC_CCR_DELAY_1)
+#define ADC_TWOSAMPLINGDELAY_8CYCLES ((uint32_t)(ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_9CYCLES ((uint32_t)ADC_CCR_DELAY_2)
+#define ADC_TWOSAMPLINGDELAY_10CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_11CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1))
+#define ADC_TWOSAMPLINGDELAY_12CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_13CYCLES ((uint32_t)ADC_CCR_DELAY_3)
+#define ADC_TWOSAMPLINGDELAY_14CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_15CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1))
+#define ADC_TWOSAMPLINGDELAY_16CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_17CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2))
+#define ADC_TWOSAMPLINGDELAY_18CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_19CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1))
+#define ADC_TWOSAMPLINGDELAY_20CYCLES ((uint32_t)ADC_CCR_DELAY)
+
+#define IS_ADC_SAMPLING_DELAY(DELAY) (((DELAY) == ADC_TWOSAMPLINGDELAY_5CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_6CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_7CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_8CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_9CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_10CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_11CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_12CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_13CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_14CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_15CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_16CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_17CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_18CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_19CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_20CYCLES))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Resolution
+ * @{
+ */
+#define ADC_RESOLUTION12b ((uint32_t)0x00000000)
+#define ADC_RESOLUTION10b ((uint32_t)ADC_CR1_RES_0)
+#define ADC_RESOLUTION8b ((uint32_t)ADC_CR1_RES_1)
+#define ADC_RESOLUTION6b ((uint32_t)ADC_CR1_RES)
+
+#define IS_ADC_RESOLUTION(RESOLUTION) (((RESOLUTION) == ADC_RESOLUTION12b) || \
+ ((RESOLUTION) == ADC_RESOLUTION10b) || \
+ ((RESOLUTION) == ADC_RESOLUTION8b) || \
+ ((RESOLUTION) == ADC_RESOLUTION6b))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_External_trigger_edge_Regular
+ * @{
+ */
+#define ADC_EXTERNALTRIGCONVEDGE_NONE ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGCONVEDGE_RISING ((uint32_t)ADC_CR2_EXTEN_0)
+#define ADC_EXTERNALTRIGCONVEDGE_FALLING ((uint32_t)ADC_CR2_EXTEN_1)
+#define ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING ((uint32_t)ADC_CR2_EXTEN)
+
+#define IS_ADC_EXT_TRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGCONVEDGE_NONE) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISING) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_FALLING) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_External_trigger_Source_Regular
+ * @{
+ */
+#define ADC_EXTERNALTRIGCONV_T1_CC1 ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGCONV_T1_CC2 ((uint32_t)ADC_CR2_EXTSEL_0)
+#define ADC_EXTERNALTRIGCONV_T1_CC3 ((uint32_t)ADC_CR2_EXTSEL_1)
+#define ADC_EXTERNALTRIGCONV_T2_CC2 ((uint32_t)(ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T2_CC3 ((uint32_t)ADC_CR2_EXTSEL_2)
+#define ADC_EXTERNALTRIGCONV_T2_CC4 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T2_TRGO ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1))
+#define ADC_EXTERNALTRIGCONV_T3_CC1 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T3_TRGO ((uint32_t)ADC_CR2_EXTSEL_3)
+#define ADC_EXTERNALTRIGCONV_T4_CC4 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T5_CC1 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1))
+#define ADC_EXTERNALTRIGCONV_T5_CC2 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T5_CC3 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2))
+#define ADC_EXTERNALTRIGCONV_T8_CC1 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIGCONV_T8_TRGO ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1))
+#define ADC_EXTERNALTRIGCONV_Ext_IT11 ((uint32_t)ADC_CR2_EXTSEL)
+
+#define IS_ADC_EXT_TRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_Ext_IT11))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_data_align
+ * @{
+ */
+#define ADC_DATAALIGN_RIGHT ((uint32_t)0x00000000)
+#define ADC_DATAALIGN_LEFT ((uint32_t)ADC_CR2_ALIGN)
+
+#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DATAALIGN_RIGHT) || \
+ ((ALIGN) == ADC_DATAALIGN_LEFT))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_channels
+ * @{
+ */
+#define ADC_CHANNEL_0 ((uint32_t)0x00000000)
+#define ADC_CHANNEL_1 ((uint32_t)ADC_CR1_AWDCH_0)
+#define ADC_CHANNEL_2 ((uint32_t)ADC_CR1_AWDCH_1)
+#define ADC_CHANNEL_3 ((uint32_t)(ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_4 ((uint32_t)ADC_CR1_AWDCH_2)
+#define ADC_CHANNEL_5 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_6 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1))
+#define ADC_CHANNEL_7 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_8 ((uint32_t)ADC_CR1_AWDCH_3)
+#define ADC_CHANNEL_9 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_10 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1))
+#define ADC_CHANNEL_11 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_12 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2))
+#define ADC_CHANNEL_13 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_14 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1))
+#define ADC_CHANNEL_15 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_16 ((uint32_t)ADC_CR1_AWDCH_4)
+#define ADC_CHANNEL_17 ((uint32_t)(ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_0))
+#define ADC_CHANNEL_18 ((uint32_t)(ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_1))
+
+#define ADC_CHANNEL_TEMPSENSOR ((uint32_t)ADC_CHANNEL_16)
+#define ADC_CHANNEL_VREFINT ((uint32_t)ADC_CHANNEL_17)
+#define ADC_CHANNEL_VBAT ((uint32_t)ADC_CHANNEL_18)
+
+#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_CHANNEL_0) || \
+ ((CHANNEL) == ADC_CHANNEL_1) || \
+ ((CHANNEL) == ADC_CHANNEL_2) || \
+ ((CHANNEL) == ADC_CHANNEL_3) || \
+ ((CHANNEL) == ADC_CHANNEL_4) || \
+ ((CHANNEL) == ADC_CHANNEL_5) || \
+ ((CHANNEL) == ADC_CHANNEL_6) || \
+ ((CHANNEL) == ADC_CHANNEL_7) || \
+ ((CHANNEL) == ADC_CHANNEL_8) || \
+ ((CHANNEL) == ADC_CHANNEL_9) || \
+ ((CHANNEL) == ADC_CHANNEL_10) || \
+ ((CHANNEL) == ADC_CHANNEL_11) || \
+ ((CHANNEL) == ADC_CHANNEL_12) || \
+ ((CHANNEL) == ADC_CHANNEL_13) || \
+ ((CHANNEL) == ADC_CHANNEL_14) || \
+ ((CHANNEL) == ADC_CHANNEL_15) || \
+ ((CHANNEL) == ADC_CHANNEL_16) || \
+ ((CHANNEL) == ADC_CHANNEL_17) || \
+ ((CHANNEL) == ADC_CHANNEL_18))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_sampling_times
+ * @{
+ */
+#define ADC_SAMPLETIME_3CYCLES ((uint32_t)0x00000000)
+#define ADC_SAMPLETIME_15CYCLES ((uint32_t)ADC_SMPR1_SMP10_0)
+#define ADC_SAMPLETIME_28CYCLES ((uint32_t)ADC_SMPR1_SMP10_1)
+#define ADC_SAMPLETIME_56CYCLES ((uint32_t)(ADC_SMPR1_SMP10_1 | ADC_SMPR1_SMP10_0))
+#define ADC_SAMPLETIME_84CYCLES ((uint32_t)ADC_SMPR1_SMP10_2)
+#define ADC_SAMPLETIME_112CYCLES ((uint32_t)(ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_0))
+#define ADC_SAMPLETIME_144CYCLES ((uint32_t)(ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_1))
+#define ADC_SAMPLETIME_480CYCLES ((uint32_t)ADC_SMPR1_SMP10)
+
+#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SAMPLETIME_3CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_15CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_28CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_56CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_84CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_112CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_144CYCLES) || \
+ ((TIME) == ADC_SAMPLETIME_480CYCLES))
+/**
+ * @}
+ */
+
+ /** @defgroup ADC_EOCSelection
+ * @{
+ */
+#define EOC_SEQ_CONV ((uint32_t)0x00000000)
+#define EOC_SINGLE_CONV ((uint32_t)0x00000001)
+#define EOC_SINGLE_SEQ_CONV ((uint32_t)0x00000002) /*!< reserved for future use */
+
+#define IS_ADC_EOCSelection(EOCSelection) (((EOCSelection) == EOC_SINGLE_CONV) || \
+ ((EOCSelection) == EOC_SEQ_CONV) || \
+ ((EOCSelection) == EOC_SINGLE_SEQ_CONV))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Event_type
+ * @{
+ */
+#define AWD_EVENT ((uint32_t)ADC_FLAG_AWD)
+#define OVR_EVENT ((uint32_t)ADC_FLAG_OVR)
+
+#define IS_ADC_EVENT_TYPE(EVENT) (((EVENT) == AWD_EVENT) || \
+ ((EVENT) == OVR_EVENT))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_analog_watchdog_selection
+ * @{
+ */
+#define ADC_ANALOGWATCHDOG_SINGLE_REG ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN))
+#define ADC_ANALOGWATCHDOG_SINGLE_INJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_JAWDEN))
+#define ADC_ANALOGWATCHDOG_SINGLE_REGINJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN | ADC_CR1_JAWDEN))
+#define ADC_ANALOGWATCHDOG_ALL_REG ((uint32_t)ADC_CR1_AWDEN)
+#define ADC_ANALOGWATCHDOG_ALL_INJEC ((uint32_t)ADC_CR1_JAWDEN)
+#define ADC_ANALOGWATCHDOG_ALL_REGINJEC ((uint32_t)(ADC_CR1_AWDEN | ADC_CR1_JAWDEN))
+#define ADC_ANALOGWATCHDOG_NONE ((uint32_t)0x00000000)
+
+#define IS_ADC_ANALOG_WATCHDOG(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_INJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REG) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_INJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REGINJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_NONE))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_interrupts_definition
+ * @{
+ */
+#define ADC_IT_EOC ((uint32_t)ADC_CR1_EOCIE)
+#define ADC_IT_AWD ((uint32_t)ADC_CR1_AWDIE)
+#define ADC_IT_JEOC ((uint32_t)ADC_CR1_JEOCIE)
+#define ADC_IT_OVR ((uint32_t)ADC_CR1_OVRIE)
+
+#define IS_ADC_IT(IT) (((IT) == ADC_IT_EOC) || ((IT) == ADC_IT_AWD) || \
+ ((IT) == ADC_IT_JEOC)|| ((IT) == ADC_IT_OVR))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_flags_definition
+ * @{
+ */
+#define ADC_FLAG_AWD ((uint32_t)ADC_SR_AWD)
+#define ADC_FLAG_EOC ((uint32_t)ADC_SR_EOC)
+#define ADC_FLAG_JEOC ((uint32_t)ADC_SR_JEOC)
+#define ADC_FLAG_JSTRT ((uint32_t)ADC_SR_JSTRT)
+#define ADC_FLAG_STRT ((uint32_t)ADC_SR_STRT)
+#define ADC_FLAG_OVR ((uint32_t)ADC_SR_OVR)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_channels_type
+ * @{
+ */
+#define ALL_CHANNELS ((uint32_t)0x00000001)
+#define REGULAR_CHANNELS ((uint32_t)0x00000002) /*!< reserved for future use */
+#define INJECTED_CHANNELS ((uint32_t)0x00000003) /*!< reserved for future use */
+
+#define IS_ADC_CHANNELS_TYPE(CHANNEL_TYPE) (((CHANNEL_TYPE) == ALL_CHANNELS) || \
+ ((CHANNEL_TYPE) == REGULAR_CHANNELS) || \
+ ((CHANNEL_TYPE) == INJECTED_CHANNELS))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_thresholds
+ * @{
+ */
+#define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= ((uint32_t)0xFFF))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_regular_length
+ * @{
+ */
+#define IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= ((uint32_t)1)) && ((LENGTH) <= ((uint32_t)16)))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_regular_rank
+ * @{
+ */
+#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= ((uint32_t)1)) && ((RANK) <= ((uint32_t)16)))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_regular_discontinuous_mode_number
+ * @{
+ */
+#define IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= ((uint32_t)1)) && ((NUMBER) <= ((uint32_t)8)))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_range_verification
+ * @{
+ */
+#define IS_ADC_RANGE(RESOLUTION, ADC_VALUE) \
+ ((((RESOLUTION) == ADC_RESOLUTION12b) && ((ADC_VALUE) <= ((uint32_t)0x0FFF))) || \
+ (((RESOLUTION) == ADC_RESOLUTION10b) && ((ADC_VALUE) <= ((uint32_t)0x03FF))) || \
+ (((RESOLUTION) == ADC_RESOLUTION8b) && ((ADC_VALUE) <= ((uint32_t)0x00FF))) || \
+ (((RESOLUTION) == ADC_RESOLUTION6b) && ((ADC_VALUE) <= ((uint32_t)0x003F))))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset ADC handle state
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_ADC_STATE_RESET)
+
+/**
+ * @brief Enable the ADC peripheral.
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR2 |= ADC_CR2_ADON)
+
+/**
+ * @brief Disable the ADC peripheral.
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= ~ADC_CR2_ADON)
+
+/**
+ * @brief Set ADC Regular channel sequence length.
+ * @param _NbrOfConversion_: Regular channel sequence length.
+ * @retval None
+ */
+#define __HAL_ADC_SQR1(_NbrOfConversion_) (((_NbrOfConversion_) - (uint8_t)1) << 20)
+
+/**
+ * @brief Set the ADC's sample time for channel numbers between 10 and 18.
+ * @param _SAMPLETIME_: Sample time parameter.
+ * @param _CHANNELNB_: Channel number.
+ * @retval None
+ */
+#define __HAL_ADC_SMPR1(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * ((_CHANNELNB_) - 10)))
+
+/**
+ * @brief Set the ADC's sample time for channel numbers between 0 and 9.
+ * @param _SAMPLETIME_: Sample time parameter.
+ * @param _CHANNELNB_: Channel number.
+ * @retval None
+ */
+#define __HAL_ADC_SMPR2(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * (_CHANNELNB_)))
+
+/**
+ * @brief Set the selected regular channel rank for rank between 1 and 6.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define __HAL_ADC_SQR3_RK(_CHANNELNB_, _RANKNB_) ((_CHANNELNB_) << (5 * ((_RANKNB_) - 1)))
+
+/**
+ * @brief Set the selected regular channel rank for rank between 7 and 12.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define __HAL_ADC_SQR2_RK(_CHANNELNB_, _RANKNB_) ((_CHANNELNB_) << (5 * ((_RANKNB_) - 7)))
+
+/**
+ * @brief Set the selected regular channel rank for rank between 13 and 16.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define __HAL_ADC_SQR1_RK(_CHANNELNB_, _RANKNB_) ((_CHANNELNB_) << (5 * ((_RANKNB_) - 13)))
+
+/**
+ * @brief Enable ADC continuous conversion mode.
+ * @param _CONTINUOUS_MODE_: Continuous mode.
+ * @retval None
+ */
+#define __HAL_ADC_CR2_CONTINUOUS(_CONTINUOUS_MODE_) ((_CONTINUOUS_MODE_) << 1)
+
+/**
+ * @brief Configures the number of discontinuous conversions for the regular group channels.
+ * @param _NBR_DISCONTINUOUSCONV_: Number of discontinuous conversions.
+ * @retval None
+ */
+#define __HAL_ADC_CR1_DISCONTINUOUS(_NBR_DISCONTINUOUSCONV_) (((_NBR_DISCONTINUOUSCONV_) - 1) << 13)
+
+/**
+ * @brief Enable ADC scan mode.
+ * @param _SCANCONV_MODE_: Scan conversion mode.
+ * @retval None
+ */
+#define __HAL_ADC_CR1_SCANCONV(_SCANCONV_MODE_) ((_SCANCONV_MODE_) << 8)
+
+/**
+ * @brief Enable the ADC end of conversion selection.
+ * @param _EOCSelection_MODE_: End of conversion selection mode.
+ * @retval None
+ */
+#define __HAL_ADC_CR2_EOCSelection(_EOCSelection_MODE_) ((_EOCSelection_MODE_) << 10)
+
+/**
+ * @brief Enable the ADC DMA continuous request.
+ * @param _DMAContReq_MODE_: DMA continuous request mode.
+ * @retval None
+ */
+#define __HAL_ADC_CR2_DMAContReq(_DMAContReq_MODE_) ((_DMAContReq_MODE_) << 9)
+
+/**
+ * @brief Enable the ADC end of conversion interrupt.
+ * @param __HANDLE__: specifies the ADC Handle.
+ * @param __INTERRUPT__: ADC Interrupt.
+ * @retval None
+ */
+#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the ADC end of conversion interrupt.
+ * @param __HANDLE__: specifies the ADC Handle.
+ * @param __INTERRUPT__: ADC interrupt.
+ * @retval None
+ */
+#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) &= ~(__INTERRUPT__))
+
+/** @brief Check if the specified ADC interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the ADC Handle.
+ * @param __INTERRUPT__: specifies the ADC interrupt source to check.
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+ * @brief Clear the ADC's pending flags.
+ * @param __HANDLE__: specifies the ADC Handle.
+ * @param __FLAG__: ADC flag.
+ * @retval None
+ */
+#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__))
+
+/**
+ * @brief Get the selected ADC's flag status.
+ * @param __HANDLE__: specifies the ADC Handle.
+ * @param __FLAG__: ADC flag.
+ * @retval None
+ */
+#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Return resolution bits in CR1 register.
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_GET_RESOLUTION(__HANDLE__) (((__HANDLE__)->Instance->CR1) & ADC_CR1_RES)
+
+/* Include ADC HAL Extension module */
+#include "stm32f4xx_hal_adc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization/de-initialization functions ***********************************/
+HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc);
+void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc);
+void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc);
+
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
+
+HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout);
+
+HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc);
+
+void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc);
+
+HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);
+HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc);
+
+uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc);
+
+void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc);
+
+/* Peripheral Control functions *************************************************/
+HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig);
+HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig);
+
+/* Peripheral State functions ***************************************************/
+HAL_ADC_StateTypeDef HAL_ADC_GetState(ADC_HandleTypeDef* hadc);
+uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_ADC_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_adc_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,288 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_adc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of ADC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_ADC_EX_H
+#define __STM32F4xx_ADC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup ADCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief ADC Configuration injected Channel structure definition
+ */
+typedef struct
+{
+ uint32_t InjectedChannel; /*!< Configure the ADC injected channel.
+ This parameter can be a value of @ref ADC_channels */
+ uint32_t InjectedRank; /*!< The rank in the injected group sequencer
+ This parameter must be a number between Min_Data = 1 and Max_Data = 4. */
+ uint32_t InjectedSamplingTime; /*!< The sample time value to be set for the selected channel.
+ This parameter can be a value of @ref ADC_sampling_times */
+ uint32_t InjectedOffset; /*!< Defines the offset to be subtracted from the raw converted data when convert injected channels.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+ uint32_t InjectedNbrOfConversion; /*!< Specifies the number of ADC conversions that will be done using the sequencer for
+ injected channel group.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 4. */
+ uint32_t AutoInjectedConv; /*!< Enables or disables the selected ADC automatic injected group
+ conversion after regular one */
+ uint32_t InjectedDiscontinuousConvMode; /*!< Specifies whether the conversion is performed in Discontinuous mode or not for injected channels.
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t ExternalTrigInjecConvEdge; /*!< Select the external trigger edge and enable the trigger of an injected channels.
+ This parameter can be a value of @ref ADCEx_External_trigger_edge_Injected */
+ uint32_t ExternalTrigInjecConv; /*!< Select the external event used to trigger the start of conversion of a injected channels.
+ This parameter can be a value of @ref ADCEx_External_trigger_Source_Injected */
+}ADC_InjectionConfTypeDef;
+
+/**
+ * @brief ADC Configuration multi-mode structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Configures the ADC to operate in independent or multi mode.
+ This parameter can be a value of @ref ADCEx_Common_mode */
+ uint32_t DMAAccessMode; /*!< Configures the Direct memory access mode for multi ADC mode.
+ This parameter can be a value of @ref ADCEx_Direct_memory_access_mode_for_multi_mode */
+ uint32_t TwoSamplingDelay; /*!< Configures the Delay between 2 sampling phases.
+ This parameter can be a value of @ref ADC_delay_between_2_sampling_phases */
+}ADC_MultiModeTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup ADCEx_Exported_Constants
+ * @{
+ */
+
+
+/** @defgroup ADCEx_Common_mode
+ * @{
+ */
+#define ADC_MODE_INDEPENDENT ((uint32_t)0x00000000)
+#define ADC_DUALMODE_REGSIMULT_INJECSIMULT ((uint32_t)ADC_CCR_MULTI_0)
+#define ADC_DUALMODE_REGSIMULT_ALTERTRIG ((uint32_t)ADC_CCR_MULTI_1)
+#define ADC_DUALMODE_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0))
+#define ADC_DUALMODE_REGSIMULT ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1))
+#define ADC_DUALMODE_INTERL ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0))
+#define ADC_DUALMODE_ALTERTRIG ((uint32_t)(ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_REGSIMULT_AlterTrig ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_1))
+#define ADC_TRIPLEMODE_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_REGSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1))
+#define ADC_TRIPLEMODE_INTERL ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0))
+#define ADC_TRIPLEMODE_ALTERTRIG ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0))
+
+#define IS_ADC_MODE(MODE) (((MODE) == ADC_MODE_INDEPENDENT) || \
+ ((MODE) == ADC_DUALMODE_REGSIMULT_INJECSIMULT) || \
+ ((MODE) == ADC_DUALMODE_REGSIMULT_ALTERTRIG) || \
+ ((MODE) == ADC_DUALMODE_INJECSIMULT) || \
+ ((MODE) == ADC_DUALMODE_REGSIMULT) || \
+ ((MODE) == ADC_DUALMODE_INTERL) || \
+ ((MODE) == ADC_DUALMODE_ALTERTRIG) || \
+ ((MODE) == ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT) || \
+ ((MODE) == ADC_TRIPLEMODE_REGSIMULT_AlterTrig) || \
+ ((MODE) == ADC_TRIPLEMODE_INJECSIMULT) || \
+ ((MODE) == ADC_TRIPLEMODE_REGSIMULT) || \
+ ((MODE) == ADC_TRIPLEMODE_INTERL) || \
+ ((MODE) == ADC_TRIPLEMODE_ALTERTRIG))
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_Direct_memory_access_mode_for_multi_mode
+ * @{
+ */
+#define ADC_DMAACCESSMODE_DISABLED ((uint32_t)0x00000000) /*!< DMA mode disabled */
+#define ADC_DMAACCESSMODE_1 ((uint32_t)ADC_CCR_DMA_0) /*!< DMA mode 1 enabled (2 / 3 half-words one by one - 1 then 2 then 3)*/
+#define ADC_DMAACCESSMODE_2 ((uint32_t)ADC_CCR_DMA_1) /*!< DMA mode 2 enabled (2 / 3 half-words by pairs - 2&1 then 1&3 then 3&2)*/
+#define ADC_DMAACCESSMODE_3 ((uint32_t)ADC_CCR_DMA) /*!< DMA mode 3 enabled (2 / 3 bytes by pairs - 2&1 then 1&3 then 3&2) */
+
+#define IS_ADC_DMA_ACCESS_MODE(MODE) (((MODE) == ADC_DMAACCESSMODE_DISABLED) || \
+ ((MODE) == ADC_DMAACCESSMODE_1) || \
+ ((MODE) == ADC_DMAACCESSMODE_2) || \
+ ((MODE) == ADC_DMAACCESSMODE_3))
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_edge_Injected
+ * @{
+ */
+#define ADC_EXTERNALTRIGINJECCONVEDGE_NONE ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGINJECCONVEDGE_RISING ((uint32_t)ADC_CR2_JEXTEN_0)
+#define ADC_EXTERNALTRIGINJECCONVEDGE_FALLING ((uint32_t)ADC_CR2_JEXTEN_1)
+#define ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING ((uint32_t)ADC_CR2_JEXTEN)
+
+#define IS_ADC_EXT_INJEC_TRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_NONE) || \
+ ((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_RISING) || \
+ ((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_FALLING) || \
+ ((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING))
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_Source_Injected
+ * @{
+ */
+#define ADC_EXTERNALTRIGINJECCONV_T1_CC4 ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO ((uint32_t)ADC_CR2_JEXTSEL_0)
+#define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ((uint32_t)ADC_CR2_JEXTSEL_1)
+#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC2 ((uint32_t)ADC_CR2_JEXTSEL_2)
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC1 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1))
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC2 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC3 ((uint32_t)ADC_CR2_JEXTSEL_3)
+#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T5_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1))
+#define ADC_EXTERNALTRIGINJECCONV_T5_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC2 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2))
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC3 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1))
+#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ((uint32_t)ADC_CR2_JEXTSEL)
+
+#define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC3) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC3) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15))
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_injected_channel_selection
+ * @{
+ */
+#define ADC_INJECTED_RANK_1 ((uint32_t)0x00000001)
+#define ADC_INJECTED_RANK_2 ((uint32_t)0x00000002)
+#define ADC_INJECTED_RANK_3 ((uint32_t)0x00000003)
+#define ADC_INJECTED_RANK_4 ((uint32_t)0x00000004)
+
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_injected_length
+ * @{
+ */
+#define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= ((uint32_t)1)) && ((LENGTH) <= ((uint32_t)4)))
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_injected_rank
+ * @{
+ */
+#define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= ((uint32_t)1)) && ((RANK) <= ((uint32_t)4)))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/**
+ * @brief Set the selected injected Channel rank.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @param _JSQR_JL_: Sequence length.
+ * @retval None
+ */
+#define __HAL_ADC_JSQR(_CHANNELNB_, _RANKNB_,_JSQR_JL_) \
+((_CHANNELNB_) << (5 * (uint8_t)(((_RANKNB_) + 3) - (_JSQR_JL_))))
+
+/* Exported functions --------------------------------------------------------*/
+
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc);
+uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank);
+HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);
+HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef* hadc);
+uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef* hadc);
+void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc);
+
+/* Peripheral Control functions *************************************************/
+HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected);
+HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_MultiModeTypeDef* multimode);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_ADC_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_can.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,781 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_can.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of CAN HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CAN_H
+#define __STM32F4xx_HAL_CAN_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CAN
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_CAN_STATE_RESET = 0x00, /*!< CAN not yet initialized or disabled */
+ HAL_CAN_STATE_READY = 0x01, /*!< CAN initialized and ready for use */
+ HAL_CAN_STATE_BUSY = 0x02, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_TX = 0x12, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_RX = 0x22, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_TX_RX = 0x32, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_CAN_STATE_ERROR = 0x04 /*!< CAN error state */
+
+}HAL_CAN_StateTypeDef;
+
+/**
+ * @brief CAN init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the length of a time quantum.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 1024 */
+
+ uint32_t Mode; /*!< Specifies the CAN operating mode.
+ This parameter can be a value of @ref CAN_operating_mode */
+
+ uint32_t SJW; /*!< Specifies the maximum number of time quanta
+ the CAN hardware is allowed to lengthen or
+ shorten a bit to perform resynchronization.
+ This parameter can be a value of @ref CAN_synchronisation_jump_width */
+
+ uint32_t BS1; /*!< Specifies the number of time quanta in Bit Segment 1.
+ This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */
+
+ uint32_t BS2; /*!< Specifies the number of time quanta in Bit Segment 2.
+ This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */
+
+ uint32_t TTCM; /*!< Enable or disable the time triggered communication mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t ABOM; /*!< Enable or disable the automatic bus-off management.
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t AWUM; /*!< Enable or disable the automatic wake-up mode.
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t NART; /*!< Enable or disable the non-automatic retransmission mode.
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t RFLM; /*!< Enable or disable the receive FIFO Locked mode.
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t TXFP; /*!< Enable or disable the transmit FIFO priority.
+ This parameter can be set to ENABLE or DISABLE */
+}CAN_InitTypeDef;
+
+/**
+ * @brief CAN filter configuration structure definition
+ */
+typedef struct
+{
+ uint32_t FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit
+ configuration, first one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit
+ configuration, second one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number,
+ according to the mode (MSBs for a 32-bit configuration,
+ first one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t FilterMaskIdLow; /*!< Specifies the filter mask number or identification number,
+ according to the mode (LSBs for a 32-bit configuration,
+ second one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter.
+ This parameter can be a value of @ref CAN_filter_FIFO */
+
+ uint32_t FilterNumber; /*!< Specifies the filter which will be initialized.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 27 */
+
+ uint32_t FilterMode; /*!< Specifies the filter mode to be initialized.
+ This parameter can be a value of @ref CAN_filter_mode */
+
+ uint32_t FilterScale; /*!< Specifies the filter scale.
+ This parameter can be a value of @ref CAN_filter_scale */
+
+ uint32_t FilterActivation; /*!< Enable or disable the filter.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t BankNumber; /*!< Select the start slave bank filter.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 28 */
+
+}CAN_FilterConfTypeDef;
+
+/**
+ * @brief CAN Tx message structure definition
+ */
+typedef struct
+{
+ uint32_t StdId; /*!< Specifies the standard identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */
+
+ uint32_t ExtId; /*!< Specifies the extended identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */
+
+ uint32_t IDE; /*!< Specifies the type of identifier for the message that will be transmitted.
+ This parameter can be a value of @ref CAN_identifier_type */
+
+ uint32_t RTR; /*!< Specifies the type of frame for the message that will be transmitted.
+ This parameter can be a value of @ref CAN_remote_transmission_request */
+
+ uint32_t DLC; /*!< Specifies the length of the frame that will be transmitted.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 8 */
+
+ uint32_t Data[8]; /*!< Contains the data to be transmitted.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
+
+}CanTxMsgTypeDef;
+
+/**
+ * @brief CAN Rx message structure definition
+ */
+typedef struct
+{
+ uint32_t StdId; /*!< Specifies the standard identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */
+
+ uint32_t ExtId; /*!< Specifies the extended identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */
+
+ uint32_t IDE; /*!< Specifies the type of identifier for the message that will be received.
+ This parameter can be a value of @ref CAN_identifier_type */
+
+ uint32_t RTR; /*!< Specifies the type of frame for the received message.
+ This parameter can be a value of @ref CAN_remote_transmission_request */
+
+ uint32_t DLC; /*!< Specifies the length of the frame that will be received.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 8 */
+
+ uint32_t Data[8]; /*!< Contains the data to be received.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
+
+ uint32_t FMI; /*!< Specifies the index of the filter the message stored in the mailbox passes through.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */
+
+ uint32_t FIFONumber; /*!< Specifies the receive FIFO number.
+ This parameter can be CAN_FIFO0 or CAN_FIFO1 */
+
+}CanRxMsgTypeDef;
+
+/**
+ * @brief CAN handle Structure definition
+ */
+typedef struct
+{
+ CAN_TypeDef *Instance; /*!< Register base address */
+
+ CAN_InitTypeDef Init; /*!< CAN required parameters */
+
+ CanTxMsgTypeDef* pTxMsg; /*!< Pointer to transmit structure */
+
+ CanRxMsgTypeDef* pRxMsg; /*!< Pointer to reception structure */
+
+ __IO HAL_CAN_StateTypeDef State; /*!< CAN communication state */
+
+ HAL_LockTypeDef Lock; /*!< CAN locking object */
+
+ __IO uint32_t ErrorCode; /*!< CAN Error code */
+
+}CAN_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CAN_Exported_Constants
+ * @{
+ */
+
+/** @defgroup HAL CAN Error Code
+ * @{
+ */
+#define HAL_CAN_ERROR_NONE 0x00 /*!< No error */
+#define HAL_CAN_ERROR_EWG 0x01 /*!< EWG error */
+#define HAL_CAN_ERROR_EPV 0x02 /*!< EPV error */
+#define HAL_CAN_ERROR_BOF 0x04 /*!< BOF error */
+#define HAL_CAN_ERROR_STF 0x08 /*!< Stuff error */
+#define HAL_CAN_ERROR_FOR 0x10 /*!< Form error */
+#define HAL_CAN_ERROR_ACK 0x20 /*!< Acknowledgment error */
+#define HAL_CAN_ERROR_BR 0x40 /*!< Bit recessive */
+#define HAL_CAN_ERROR_BD 0x80 /*!< LEC dominant */
+#define HAL_CAN_ERROR_CRC 0x100 /*!< LEC transfer error */
+/**
+ * @}
+ */
+
+
+/** @defgroup CAN_InitStatus
+ * @{
+ */
+#define CAN_INITSTATUS_FAILED ((uint8_t)0x00) /*!< CAN initialization failed */
+#define CAN_INITSTATUS_SUCCESS ((uint8_t)0x01) /*!< CAN initialization OK */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_operating_mode
+ * @{
+ */
+#define CAN_MODE_NORMAL ((uint32_t)0x00000000) /*!< Normal mode */
+#define CAN_MODE_LOOPBACK ((uint32_t)CAN_BTR_LBKM) /*!< Loopback mode */
+#define CAN_MODE_SILENT ((uint32_t)CAN_BTR_SILM) /*!< Silent mode */
+#define CAN_MODE_SILENT_LOOPBACK ((uint32_t)(CAN_BTR_LBKM | CAN_BTR_SILM)) /*!< Loopback combined with silent mode */
+
+#define IS_CAN_MODE(MODE) (((MODE) == CAN_MODE_NORMAL) || \
+ ((MODE) == CAN_MODE_LOOPBACK)|| \
+ ((MODE) == CAN_MODE_SILENT) || \
+ ((MODE) == CAN_MODE_SILENT_LOOPBACK))
+/**
+ * @}
+ */
+
+
+/** @defgroup CAN_synchronisation_jump_width
+ * @{
+ */
+#define CAN_SJW_1TQ ((uint32_t)0x00000000) /*!< 1 time quantum */
+#define CAN_SJW_2TQ ((uint32_t)CAN_BTR_SJW_0) /*!< 2 time quantum */
+#define CAN_SJW_3TQ ((uint32_t)CAN_BTR_SJW_1) /*!< 3 time quantum */
+#define CAN_SJW_4TQ ((uint32_t)CAN_BTR_SJW) /*!< 4 time quantum */
+
+#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ)|| \
+ ((SJW) == CAN_SJW_3TQ) || ((SJW) == CAN_SJW_4TQ))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_1
+ * @{
+ */
+#define CAN_BS1_1TQ ((uint32_t)0x00000000) /*!< 1 time quantum */
+#define CAN_BS1_2TQ ((uint32_t)CAN_BTR_TS1_0) /*!< 2 time quantum */
+#define CAN_BS1_3TQ ((uint32_t)CAN_BTR_TS1_1) /*!< 3 time quantum */
+#define CAN_BS1_4TQ ((uint32_t)(CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 4 time quantum */
+#define CAN_BS1_5TQ ((uint32_t)CAN_BTR_TS1_2) /*!< 5 time quantum */
+#define CAN_BS1_6TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 6 time quantum */
+#define CAN_BS1_7TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 7 time quantum */
+#define CAN_BS1_8TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 8 time quantum */
+#define CAN_BS1_9TQ ((uint32_t)CAN_BTR_TS1_3) /*!< 9 time quantum */
+#define CAN_BS1_10TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_0)) /*!< 10 time quantum */
+#define CAN_BS1_11TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1)) /*!< 11 time quantum */
+#define CAN_BS1_12TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 12 time quantum */
+#define CAN_BS1_13TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2)) /*!< 13 time quantum */
+#define CAN_BS1_14TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 14 time quantum */
+#define CAN_BS1_15TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 15 time quantum */
+#define CAN_BS1_16TQ ((uint32_t)CAN_BTR_TS1) /*!< 16 time quantum */
+
+#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16TQ)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_2
+ * @{
+ */
+#define CAN_BS2_1TQ ((uint32_t)0x00000000) /*!< 1 time quantum */
+#define CAN_BS2_2TQ ((uint32_t)CAN_BTR_TS2_0) /*!< 2 time quantum */
+#define CAN_BS2_3TQ ((uint32_t)CAN_BTR_TS2_1) /*!< 3 time quantum */
+#define CAN_BS2_4TQ ((uint32_t)(CAN_BTR_TS2_1 | CAN_BTR_TS2_0)) /*!< 4 time quantum */
+#define CAN_BS2_5TQ ((uint32_t)CAN_BTR_TS2_2) /*!< 5 time quantum */
+#define CAN_BS2_6TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_0)) /*!< 6 time quantum */
+#define CAN_BS2_7TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_1)) /*!< 7 time quantum */
+#define CAN_BS2_8TQ ((uint32_t)CAN_BTR_TS2) /*!< 8 time quantum */
+
+#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8TQ)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_clock_prescaler
+ * @{
+ */
+#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_number
+ * @{
+ */
+#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_mode
+ * @{
+ */
+#define CAN_FILTERMODE_IDMASK ((uint8_t)0x00) /*!< Identifier mask mode */
+#define CAN_FILTERMODE_IDLIST ((uint8_t)0x01) /*!< Identifier list mode */
+
+#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \
+ ((MODE) == CAN_FILTERMODE_IDLIST))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_scale
+ * @{
+ */
+#define CAN_FILTERSCALE_16BIT ((uint8_t)0x00) /*!< Two 16-bit filters */
+#define CAN_FILTERSCALE_32BIT ((uint8_t)0x01) /*!< One 32-bit filter */
+
+#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \
+ ((SCALE) == CAN_FILTERSCALE_32BIT))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_FIFO
+ * @{
+ */
+#define CAN_FILTER_FIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */
+#define CAN_FILTER_FIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */
+
+#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FILTER_FIFO0) || \
+ ((FIFO) == CAN_FILTER_FIFO1))
+
+/* Legacy defines */
+#define CAN_FilterFIFO0 CAN_FILTER_FIFO0
+#define CAN_FilterFIFO1 CAN_FILTER_FIFO1
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Start_bank_filter_for_slave_CAN
+ * @{
+ */
+#define IS_CAN_BANKNUMBER(BANKNUMBER) ((BANKNUMBER) <= 28)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Tx
+ * @{
+ */
+#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02))
+#define IS_CAN_STDID(STDID) ((STDID) <= ((uint32_t)0x7FF))
+#define IS_CAN_EXTID(EXTID) ((EXTID) <= ((uint32_t)0x1FFFFFFF))
+#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_identifier_type
+ * @{
+ */
+#define CAN_ID_STD ((uint32_t)0x00000000) /*!< Standard Id */
+#define CAN_ID_EXT ((uint32_t)0x00000004) /*!< Extended Id */
+#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_ID_STD) || \
+ ((IDTYPE) == CAN_ID_EXT))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_remote_transmission_request
+ * @{
+ */
+#define CAN_RTR_DATA ((uint32_t)0x00000000) /*!< Data frame */
+#define CAN_RTR_REMOTE ((uint32_t)0x00000002) /*!< Remote frame */
+#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE))
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_transmit_constants
+ * @{
+ */
+#define CAN_TXSTATUS_FAILED ((uint8_t)0x00) /*!< CAN transmission failed */
+#define CAN_TXSTATUS_OK ((uint8_t)0x01) /*!< CAN transmission succeeded */
+#define CAN_TXSTATUS_PENDING ((uint8_t)0x02) /*!< CAN transmission pending */
+#define CAN_TXSTATUS_NOMAILBOX ((uint8_t)0x04) /*!< CAN cell did not provide CAN_TxStatus_NoMailBox */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_receive_FIFO_number_constants
+ * @{
+ */
+#define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */
+#define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */
+
+#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_flags
+ * @{
+ */
+/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus()
+ and CAN_ClearFlag() functions. */
+/* If the flag is 0x1XXXXXXX, it means that it can only be used with
+ CAN_GetFlagStatus() function. */
+
+/* Transmit Flags */
+#define CAN_FLAG_RQCP0 ((uint32_t)0x00000500) /*!< Request MailBox0 flag */
+#define CAN_FLAG_RQCP1 ((uint32_t)0x00000508) /*!< Request MailBox1 flag */
+#define CAN_FLAG_RQCP2 ((uint32_t)0x00000510) /*!< Request MailBox2 flag */
+#define CAN_FLAG_TXOK0 ((uint32_t)0x00000501) /*!< Transmission OK MailBox0 flag */
+#define CAN_FLAG_TXOK1 ((uint32_t)0x00000509) /*!< Transmission OK MailBox1 flag */
+#define CAN_FLAG_TXOK2 ((uint32_t)0x00000511) /*!< Transmission OK MailBox2 flag */
+#define CAN_FLAG_TME0 ((uint32_t)0x0000051A) /*!< Transmit mailbox 0 empty flag */
+#define CAN_FLAG_TME1 ((uint32_t)0x0000051B) /*!< Transmit mailbox 0 empty flag */
+#define CAN_FLAG_TME2 ((uint32_t)0x0000051C) /*!< Transmit mailbox 0 empty flag */
+
+/* Receive Flags */
+#define CAN_FLAG_FF0 ((uint32_t)0x00000203) /*!< FIFO 0 Full flag */
+#define CAN_FLAG_FOV0 ((uint32_t)0x00000204) /*!< FIFO 0 Overrun flag */
+
+#define CAN_FLAG_FF1 ((uint32_t)0x00000403) /*!< FIFO 1 Full flag */
+#define CAN_FLAG_FOV1 ((uint32_t)0x00000404) /*!< FIFO 1 Overrun flag */
+
+/* Operating Mode Flags */
+#define CAN_FLAG_WKU ((uint32_t)0x00000103) /*!< Wake up flag */
+#define CAN_FLAG_SLAK ((uint32_t)0x00000101) /*!< Sleep acknowledge flag */
+#define CAN_FLAG_SLAKI ((uint32_t)0x00000104) /*!< Sleep acknowledge flag */
+/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible.
+ In this case the SLAK bit can be polled.*/
+
+/* Error Flags */
+#define CAN_FLAG_EWG ((uint32_t)0x00000300) /*!< Error warning flag */
+#define CAN_FLAG_EPV ((uint32_t)0x00000301) /*!< Error passive flag */
+#define CAN_FLAG_BOF ((uint32_t)0x00000302) /*!< Bus-Off flag */
+
+#define IS_CAN_GET_FLAG(FLAG) (((FLAG) == CAN_FLAG_RQCP2) || ((FLAG) == CAN_FLAG_BOF) || \
+ ((FLAG) == CAN_FLAG_EPV) || ((FLAG) == CAN_FLAG_EWG) || \
+ ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_FOV0) || \
+ ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_SLAK) || \
+ ((FLAG) == CAN_FLAG_FOV1) || ((FLAG) == CAN_FLAG_FF1) || \
+ ((FLAG) == CAN_FLAG_RQCP1) || ((FLAG) == CAN_FLAG_RQCP0))
+
+
+#define IS_CAN_CLEAR_FLAG(FLAG)(((FLAG) == CAN_FLAG_SLAK) || ((FLAG) == CAN_FLAG_RQCP2) || \
+ ((FLAG) == CAN_FLAG_RQCP1) || ((FLAG) == CAN_FLAG_RQCP0) || \
+ ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_FOV0) || \
+ ((FLAG) == CAN_FLAG_FF1) || ((FLAG) == CAN_FLAG_FOV1) || \
+ ((FLAG) == CAN_FLAG_WKU))
+/**
+ * @}
+ */
+
+
+/** @defgroup CAN_interrupts
+ * @{
+ */
+#define CAN_IT_TME ((uint32_t)CAN_IER_TMEIE) /*!< Transmit mailbox empty interrupt */
+
+/* Receive Interrupts */
+#define CAN_IT_FMP0 ((uint32_t)CAN_IER_FMPIE0) /*!< FIFO 0 message pending interrupt */
+#define CAN_IT_FF0 ((uint32_t)CAN_IER_FFIE0) /*!< FIFO 0 full interrupt */
+#define CAN_IT_FOV0 ((uint32_t)CAN_IER_FOVIE0) /*!< FIFO 0 overrun interrupt */
+#define CAN_IT_FMP1 ((uint32_t)CAN_IER_FMPIE1) /*!< FIFO 1 message pending interrupt */
+#define CAN_IT_FF1 ((uint32_t)CAN_IER_FFIE1) /*!< FIFO 1 full interrupt */
+#define CAN_IT_FOV1 ((uint32_t)CAN_IER_FOVIE1) /*!< FIFO 1 overrun interrupt */
+
+/* Operating Mode Interrupts */
+#define CAN_IT_WKU ((uint32_t)CAN_IER_WKUIE) /*!< Wake-up interrupt */
+#define CAN_IT_SLK ((uint32_t)CAN_IER_SLKIE) /*!< Sleep acknowledge interrupt */
+
+/* Error Interrupts */
+#define CAN_IT_EWG ((uint32_t)CAN_IER_EWGIE) /*!< Error warning interrupt */
+#define CAN_IT_EPV ((uint32_t)CAN_IER_EPVIE) /*!< Error passive interrupt */
+#define CAN_IT_BOF ((uint32_t)CAN_IER_BOFIE) /*!< Bus-off interrupt */
+#define CAN_IT_LEC ((uint32_t)CAN_IER_LECIE) /*!< Last error code interrupt */
+#define CAN_IT_ERR ((uint32_t)CAN_IER_ERRIE) /*!< Error Interrupt */
+
+/* Flags named as Interrupts : kept only for FW compatibility */
+#define CAN_IT_RQCP0 CAN_IT_TME
+#define CAN_IT_RQCP1 CAN_IT_TME
+#define CAN_IT_RQCP2 CAN_IT_TME
+
+#define IS_CAN_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FMP0) ||\
+ ((IT) == CAN_IT_FF0) || ((IT) == CAN_IT_FOV0) ||\
+ ((IT) == CAN_IT_FMP1) || ((IT) == CAN_IT_FF1) ||\
+ ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG) ||\
+ ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\
+ ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\
+ ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK))
+
+#define IS_CAN_CLEAR_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FF0) ||\
+ ((IT) == CAN_IT_FOV0)|| ((IT) == CAN_IT_FF1) ||\
+ ((IT) == CAN_IT_FOV1)|| ((IT) == CAN_IT_EWG) ||\
+ ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\
+ ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\
+ ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK))
+/**
+ * @}
+ */
+
+/* Time out for INAK bit */
+#define INAK_TIMEOUT ((uint32_t)0x0000FFFF)
+/* Time out for SLAK bit */
+#define SLAK_TIMEOUT ((uint32_t)0x0000FFFF)
+
+/* Mailboxes definition */
+#define CAN_TXMAILBOX_0 ((uint8_t)0x00)
+#define CAN_TXMAILBOX_1 ((uint8_t)0x01)
+#define CAN_TXMAILBOX_2 ((uint8_t)0x02)
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset CAN handle state
+ * @param __HANDLE__: specifies the CAN Handle.
+ * @retval None
+ */
+#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CAN_STATE_RESET)
+
+/**
+ * @brief Enable the specified CAN interrupts.
+ * @param __HANDLE__: CAN handle
+ * @param __INTERRUPT__: CAN Interrupt
+ * @retval None
+ */
+#define __HAL_CAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified CAN interrupts.
+ * @param __HANDLE__: CAN handle
+ * @param __INTERRUPT__: CAN Interrupt
+ * @retval None
+ */
+#define __HAL_CAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__))
+
+/**
+ * @brief Return the number of pending received messages.
+ * @param __HANDLE__: CAN handle
+ * @param __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+ * @retval The number of pending message.
+ */
+#define __HAL_CAN_MSG_PENDING(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
+((uint8_t)((__HANDLE__)->Instance->RF0R&(uint32_t)0x03)) : ((uint8_t)((__HANDLE__)->Instance->RF1R&(uint32_t)0x03)))
+
+/** @brief Check whether the specified CAN flag is set or not.
+ * @param __HANDLE__: CAN Handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_TSR_RQCP0: Request MailBox0 Flag
+ * @arg CAN_TSR_RQCP1: Request MailBox1 Flag
+ * @arg CAN_TSR_RQCP2: Request MailBox2 Flag
+ * @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
+ * @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
+ * @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
+ * @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
+ * @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
+ * @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
+ * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
+ * @arg CAN_FLAG_FF0: FIFO 0 Full Flag
+ * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
+ * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
+ * @arg CAN_FLAG_FF1: FIFO 1 Full Flag
+ * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
+ * @arg CAN_FLAG_WKU: Wake up Flag
+ * @arg CAN_FLAG_SLAK: Sleep acknowledge Flag
+ * @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
+ * @arg CAN_FLAG_EWG: Error Warning Flag
+ * @arg CAN_FLAG_EPV: Error Passive Flag
+ * @arg CAN_FLAG_BOF: Bus-Off Flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define CAN_FLAG_MASK ((uint32_t)0x000000FF)
+#define __HAL_CAN_GET_FLAG(__HANDLE__, __FLAG__) \
+((((__FLAG__) >> 8) == 5)? ((((__HANDLE__)->Instance->TSR) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 2)? ((((__HANDLE__)->Instance->RF0R) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 4)? ((((__HANDLE__)->Instance->RF1R) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 1)? ((((__HANDLE__)->Instance->MSR) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ ((((__HANDLE__)->Instance->ESR) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))))
+
+/** @brief Clear the specified CAN pending flag.
+ * @param __HANDLE__: CAN Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_TSR_RQCP0: Request MailBox0 Flag
+ * @arg CAN_TSR_RQCP1: Request MailBox1 Flag
+ * @arg CAN_TSR_RQCP2: Request MailBox2 Flag
+ * @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
+ * @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
+ * @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
+ * @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
+ * @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
+ * @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
+ * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
+ * @arg CAN_FLAG_FF0: FIFO 0 Full Flag
+ * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
+ * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
+ * @arg CAN_FLAG_FF1: FIFO 1 Full Flag
+ * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
+ * @arg CAN_FLAG_WKU: Wake up Flag
+ * @arg CAN_FLAG_SLAK: Sleep acknowledge Flag
+ * @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
+ * @arg CAN_FLAG_EWG: Error Warning Flag
+ * @arg CAN_FLAG_EPV: Error Passive Flag
+ * @arg CAN_FLAG_BOF: Bus-Off Flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_CAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+((((__FLAG__) >> 8) == 5)? (((__HANDLE__)->Instance->TSR) = ~((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 2)? (((__HANDLE__)->Instance->RF0R) = ~((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 4)? (((__HANDLE__)->Instance->RF1R) = ~((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 1)? (((__HANDLE__)->Instance->MSR) = ~((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__HANDLE__)->Instance->ESR) = ~((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))))
+
+/** @brief Check if the specified CAN interrupt source is enabled or disabled.
+ * @param __HANDLE__: CAN Handle
+ * @param __INTERRUPT__: specifies the CAN interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_IT_TME: Transmit mailbox empty interrupt enable
+ * @arg CAN_IT_FMP0: FIFO0 message pending interrupt enablev
+ * @arg CAN_IT_FMP1: FIFO1 message pending interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_CAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+ * @brief Check the transmission status of a CAN Frame.
+ * @param __HANDLE__: CAN Handle
+ * @param __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission.
+ * @retval The new status of transmission (TRUE or FALSE).
+ */
+#define __HAL_CAN_TRANSMIT_STATUS(__HANDLE__, __TRANSMITMAILBOX__)\
+(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) == (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) :\
+ ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) == (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) :\
+ ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)) == (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)))
+
+
+
+/**
+ * @brief Release the specified receive FIFO.
+ * @param __HANDLE__: CAN handle
+ * @param __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+ * @retval None
+ */
+#define __HAL_CAN_FIFO_RELEASE(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
+((__HANDLE__)->Instance->RF0R |= CAN_RF0R_RFOM0) : ((__HANDLE__)->Instance->RF1R |= CAN_RF1R_RFOM1))
+
+/**
+ * @brief Cancel a transmit request.
+ * @param __HANDLE__: CAN Handle
+ * @param __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission.
+ * @retval None
+ */
+#define __HAL_CAN_CANCEL_TRANSMIT(__HANDLE__, __TRANSMITMAILBOX__)\
+(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ0) :\
+ ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ1) :\
+ ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ2))
+
+/**
+ * @brief Enable or disable the DBG Freeze for CAN.
+ * @param __HANDLE__: CAN Handle
+ * @param __NEWSTATE__: new state of the CAN peripheral.
+ * This parameter can be: ENABLE (CAN reception/transmission is frozen
+ * during debug. Reception FIFOs can still be accessed/controlled normally)
+ * or DISABLE (CAN is working during debug).
+ * @retval None
+ */
+#define __HAL_CAN_DBG_FREEZE(__HANDLE__, __NEWSTATE__) (((__NEWSTATE__) == ENABLE)? \
+((__HANDLE__)->Instance->MCR |= CAN_MCR_DBF) : ((__HANDLE__)->Instance->MCR &= ~CAN_MCR_DBF))
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions ***********************************/
+HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan);
+HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig);
+HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan);
+void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan);
+void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan);
+
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef *hcan, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef *hcan, uint8_t FIFONumber, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef *hcan, uint8_t FIFONumber);
+HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef *hcan);
+
+/* Peripheral State functions ***************************************************/
+void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan);
+uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan);
+HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan);
+
+void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan);
+void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan);
+void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan);
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_CAN_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_conf.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,407 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_conf_template.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief HAL configuration template file.
+ * This file should be copied to the application folder and renamed
+ * to stm32f4xx_hal_conf.h.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CONF_H
+#define __STM32F4xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_CAN_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_CRYP_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DCMI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_DMA2D_MODULE_ENABLED
+#define HAL_ETH_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_NAND_MODULE_ENABLED
+#define HAL_NOR_MODULE_ENABLED
+#define HAL_PCCARD_MODULE_ENABLED
+#define HAL_SRAM_MODULE_ENABLED
+#define HAL_SDRAM_MODULE_ENABLED
+#define HAL_HASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_LTDC_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SAI_MODULE_ENABLED
+#define HAL_SD_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_HCD_MODULE_ENABLED
+
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT ((uint32_t)500) /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief Internal Low Speed oscillator (LSI) value.
+ */
+#if !defined (LSI_VALUE)
+ #define LSI_VALUE ((uint32_t)40000)
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+/**
+ * @brief External clock source for I2S peripheral
+ * This value is used by the I2S HAL module to compute the I2S clock source
+ * frequency, this source is inserted directly through I2S_CKIN pad.
+ */
+#if !defined (EXTERNAL_CLOCK_VALUE)
+ #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY ((uint32_t)0x0F) /*!< tick interrupt priority */
+#define USE_RTOS 0
+#define PREFETCH_ENABLE 1
+#define INSTRUCTION_CACHE_ENABLE 1
+#define DATA_CACHE_ENABLE 1
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/* #define USE_FULL_ASSERT 1 */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0 2
+#define MAC_ADDR1 0
+#define MAC_ADDR2 0
+#define MAC_ADDR3 0
+#define MAC_ADDR4 0
+#define MAC_ADDR5 0
+
+/* Definition of the Ethernet driver buffers size and count */
+#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
+#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
+#define ETH_RXBUFNB ((uint32_t)4) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
+#define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848 PHY Address*/
+#define DP83848_PHY_ADDRESS 0x01
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY ((uint32_t)0x000000FF)
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF)
+
+#define PHY_READ_TO ((uint32_t)0x0000FFFF)
+#define PHY_WRITE_TO ((uint32_t)0x0000FFFF)
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */
+#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */
+
+#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
+#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
+#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
+#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
+#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
+#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
+#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
+
+#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
+#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
+#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
+
+/* Section 4: Extended PHY Registers */
+
+#define PHY_SR ((uint16_t)0x10) /*!< PHY status register Offset */
+#define PHY_MICR ((uint16_t)0x11) /*!< MII Interrupt Control Register */
+#define PHY_MISR ((uint16_t)0x12) /*!< MII Interrupt Status and Misc. Control Register */
+
+#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */
+#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */
+#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */
+
+#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */
+#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */
+
+#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */
+#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32f4xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+ #include "stm32f4xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32f4xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32f4xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32f4xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32f4xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+ #include "stm32f4xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+ #include "stm32f4xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32f4xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+ #include "stm32f4xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+ #include "stm32f4xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+ #include "stm32f4xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+ #include "stm32f4xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+ #include "stm32f4xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+ #include "stm32f4xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32f4xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f4xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32f4xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32f4xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f4xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f4xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f4xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f4xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_cortex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,163 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_cortex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of CORTEX HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CORTEX_H
+#define __STM32F4xx_HAL_CORTEX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CORTEX
+ * @{
+ */
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Constants
+ * @{
+ */
+
+
+/** @defgroup CORTEX_Preemption_Priority_Group
+ * @{
+ */
+
+#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007) /*!< 0 bits for pre-emption priority
+ 4 bits for subpriority */
+#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006) /*!< 1 bits for pre-emption priority
+ 3 bits for subpriority */
+#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority
+ 2 bits for subpriority */
+#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority
+ 1 bits for subpriority */
+#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority
+ 0 bits for subpriority */
+
+#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_1) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_2) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_3) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_4))
+
+#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
+
+#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
+
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_SysTick_clock_source
+ * @{
+ */
+#define SYSTICK_CLKSOURCE_HCLK_DIV8 ((uint32_t)0x00000000)
+#define SYSTICK_CLKSOURCE_HCLK ((uint32_t)0x00000004)
+#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
+ ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
+/**
+ * @}
+ */
+
+/* Exported Macros -----------------------------------------------------------*/
+
+/** @brief Configures the SysTick clock source.
+ * @param __CLKSRC__: specifies the SysTick clock source.
+ * This parameter can be one of the following values:
+ * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
+ * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
+ * @retval None
+ */
+#define __HAL_CORTEX_SYSTICKCLK_CONFIG(__CLKSRC__) \
+ do { \
+ if ((__CLKSRC__) == SYSTICK_CLKSOURCE_HCLK) \
+ { \
+ SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK; \
+ } \
+ else \
+ SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK; \
+ } while(0)
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions *******************************/
+void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup);
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SystemReset(void);
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
+
+/* Peripheral Control functions *************************************************/
+uint32_t HAL_NVIC_GetPriorityGrouping(void);
+void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority);
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
+uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
+void HAL_SYSTICK_IRQHandler(void);
+void HAL_SYSTICK_Callback(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CORTEX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_crc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,145 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_crc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of CRC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CRC_H
+#define __STM32F4xx_HAL_CRC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CRC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief CRC HAL State Structure definition
+ */
+typedef enum
+{
+ HAL_CRC_STATE_RESET = 0x00, /*!< CRC not yet initialized or disabled */
+ HAL_CRC_STATE_READY = 0x01, /*!< CRC initialized and ready for use */
+ HAL_CRC_STATE_BUSY = 0x02, /*!< CRC internal process is ongoing */
+ HAL_CRC_STATE_TIMEOUT = 0x03, /*!< CRC timeout state */
+ HAL_CRC_STATE_ERROR = 0x04 /*!< CRC error state */
+
+}HAL_CRC_StateTypeDef;
+
+/**
+ * @brief CRC handle Structure definition
+ */
+typedef struct
+{
+ CRC_TypeDef *Instance; /*!< Register base address */
+
+ HAL_LockTypeDef Lock; /*!< CRC locking object */
+
+ __IO HAL_CRC_StateTypeDef State; /*!< CRC communication state */
+
+}CRC_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset CRC handle state
+ * @param __HANDLE__: CRC handle
+ * @retval None
+ */
+#define __HAL_CRC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRC_STATE_RESET)
+
+/**
+ * @brief Resets CRC Data Register.
+ * @param __HANDLE__: CRC handle
+ * @retval None
+ */
+#define __HAL_CRC_DR_RESET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_RESET)
+
+/**
+ * @brief Stores a 8-bit data in the Independent Data(ID) register.
+ * @param __HANDLE__: CRC handle
+ * @param __VALUE: 8-bit value to be stored in the ID register
+ * @retval None
+ */
+#define __HAL_CRC_SET_IDR(__HANDLE__, __VALUE__) (MODIFY_REG((__HANDLE__)->Instance->IDR, CRC_IDR_IDR, (__VALUE__))
+
+/**
+ * @brief Returns the 8-bit data stored in the Independent Data(ID) register.
+ * @param __HANDLE__: CRC handle
+ * @retval 8-bit value of the ID register
+ */
+#define __HAL_CRC_GET_IDR(__HANDLE__) (((__HANDLE__)->Instance->IDR) & CRC_IDR_IDR)
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc);
+HAL_StatusTypeDef HAL_CRC_DeInit (CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc);
+
+/* Peripheral Control functions ************************************************/
+uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
+uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
+
+/* Peripheral State functions **************************************************/
+HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CRC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_cryp.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,403 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_cryp.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of CRYP HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CRYP_H
+#define __STM32F4xx_HAL_CRYP_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F415xx) || defined(STM32F417xx) || defined(STM32F437xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CRYP
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief CRYP Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string.
+ This parameter can be a value of @ref CRYP_Data_Type */
+
+ uint32_t KeySize; /*!< Used only in AES mode only : 128, 192 or 256 bit key length.
+ This parameter can be a value of @ref CRYP_Key_Size */
+
+ uint8_t* pKey; /*!< The key used for encryption/decryption */
+
+ uint8_t* pInitVect; /*!< The initialization vector used also as initialization
+ counter in CTR mode */
+
+ uint8_t IVSize; /*!< The size of initialization vector.
+ This parameter (called nonce size in CCM) is used only
+ in AES-128/192/256 encryption/decryption CCM mode */
+
+ uint8_t TagSize; /*!< The size of returned authentication TAG.
+ This parameter is used only in AES-128/192/256
+ encryption/decryption CCM mode */
+
+ uint8_t* Header; /*!< The header used in GCM and CCM modes */
+
+ uint16_t HeaderSize; /*!< The size of header buffer in bytes */
+
+ uint8_t* pScratch; /*!< Scratch buffer used to append the header. It's size must be equal to header size + 21 bytes.
+ This parameter is used only in AES-128/192/256 encryption/decryption CCM mode */
+}CRYP_InitTypeDef;
+
+/**
+ * @brief HAL CRYP State structures definition
+ */
+typedef enum
+{
+ HAL_CRYP_STATE_RESET = 0x00, /*!< CRYP not yet initialized or disabled */
+ HAL_CRYP_STATE_READY = 0x01, /*!< CRYP initialized and ready for use */
+ HAL_CRYP_STATE_BUSY = 0x02, /*!< CRYP internal processing is ongoing */
+ HAL_CRYP_STATE_TIMEOUT = 0x03, /*!< CRYP timeout state */
+ HAL_CRYP_STATE_ERROR = 0x04 /*!< CRYP error state */
+}HAL_CRYP_STATETypeDef;
+
+/**
+ * @brief HAL CRYP phase structures definition
+ */
+typedef enum
+{
+ HAL_CRYP_PHASE_READY = 0x01, /*!< CRYP peripheral is ready for initialization. */
+ HAL_CRYP_PHASE_PROCESS = 0x02, /*!< CRYP peripheral is in processing phase */
+ HAL_CRYP_PHASE_FINAL = 0x03 /*!< CRYP peripheral is in final phase
+ This is relevant only with CCM and GCM modes */
+}HAL_PhaseTypeDef;
+
+/**
+ * @brief CRYP handle Structure definition
+ */
+typedef struct
+{
+ CRYP_InitTypeDef Init; /*!< CRYP required parameters */
+
+ uint8_t *pCrypInBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */
+
+ uint8_t *pCrypOutBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */
+
+ __IO uint16_t CrypInCount; /*!< Counter of inputed data */
+
+ __IO uint16_t CrypOutCount; /*!< Counter of outputed data */
+
+ HAL_StatusTypeDef Status; /*!< CRYP peripheral status */
+
+ HAL_PhaseTypeDef Phase; /*!< CRYP peripheral phase */
+
+ DMA_HandleTypeDef *hdmain; /*!< CRYP In DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmaout; /*!< CRYP Out DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< CRYP locking object */
+
+ __IO HAL_CRYP_STATETypeDef State; /*!< CRYP peripheral state */
+}CRYP_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CRYP_Exported_Constants
+ * @{
+ */
+
+/** @defgroup CRYP_Key_Size
+ * @{
+ */
+#define CRYP_KEYSIZE_128B ((uint32_t)0x00000000)
+#define CRYP_KEYSIZE_192B CRYP_CR_KEYSIZE_0
+#define CRYP_KEYSIZE_256B CRYP_CR_KEYSIZE_1
+
+#define IS_CRYP_KEYSIZE(KEYSIZE) (((KEYSIZE) == CRYP_KEYSIZE_128B) || \
+ ((KEYSIZE) == CRYP_KEYSIZE_192B) || \
+ ((KEYSIZE) == CRYP_KEYSIZE_256B))
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Data_Type
+ * @{
+ */
+#define CRYP_DATATYPE_32B ((uint32_t)0x00000000)
+#define CRYP_DATATYPE_16B CRYP_CR_DATATYPE_0
+#define CRYP_DATATYPE_8B CRYP_CR_DATATYPE_1
+#define CRYP_DATATYPE_1B CRYP_CR_DATATYPE
+
+#define IS_CRYP_DATATYPE(DATATYPE) (((DATATYPE) == CRYP_DATATYPE_32B) || \
+ ((DATATYPE) == CRYP_DATATYPE_16B) || \
+ ((DATATYPE) == CRYP_DATATYPE_8B) || \
+ ((DATATYPE) == CRYP_DATATYPE_1B))
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_AlgoModeDirection
+ * @{
+ */
+#define CRYP_CR_ALGOMODE_DIRECTION ((uint32_t)0x0008003C)
+#define CRYP_CR_ALGOMODE_TDES_ECB_ENCRYPT ((uint32_t)0x00000000)
+#define CRYP_CR_ALGOMODE_TDES_ECB_DECRYPT ((uint32_t)0x00000004)
+#define CRYP_CR_ALGOMODE_TDES_CBC_ENCRYPT ((uint32_t)0x00000008)
+#define CRYP_CR_ALGOMODE_TDES_CBC_DECRYPT ((uint32_t)0x0000000C)
+#define CRYP_CR_ALGOMODE_DES_ECB_ENCRYPT ((uint32_t)0x00000010)
+#define CRYP_CR_ALGOMODE_DES_ECB_DECRYPT ((uint32_t)0x00000014)
+#define CRYP_CR_ALGOMODE_DES_CBC_ENCRYPT ((uint32_t)0x00000018)
+#define CRYP_CR_ALGOMODE_DES_CBC_DECRYPT ((uint32_t)0x0000001C)
+#define CRYP_CR_ALGOMODE_AES_ECB_ENCRYPT ((uint32_t)0x00000020)
+#define CRYP_CR_ALGOMODE_AES_ECB_DECRYPT ((uint32_t)0x00000024)
+#define CRYP_CR_ALGOMODE_AES_CBC_ENCRYPT ((uint32_t)0x00000028)
+#define CRYP_CR_ALGOMODE_AES_CBC_DECRYPT ((uint32_t)0x0000002C)
+#define CRYP_CR_ALGOMODE_AES_CTR_ENCRYPT ((uint32_t)0x00000030)
+#define CRYP_CR_ALGOMODE_AES_CTR_DECRYPT ((uint32_t)0x00000034)
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Interrupt
+ * @{
+ */
+#define CRYP_IT_INI ((uint32_t)CRYP_IMSCR_INIM) /*!< Input FIFO Interrupt */
+#define CRYP_IT_OUTI ((uint32_t)CRYP_IMSCR_OUTIM) /*!< Output FIFO Interrupt */
+/**
+ * @}
+ */
+
+/** @defgroup CRYP_Flags
+ * @{
+ */
+
+#define CRYP_FLAG_BUSY ((uint32_t)0x00000010) /*!< The CRYP core is currently
+ processing a block of data
+ or a key preparation (for
+ AES decryption). */
+#define CRYP_FLAG_IFEM ((uint32_t)0x00000001) /*!< Input FIFO is empty */
+#define CRYP_FLAG_IFNF ((uint32_t)0x00000002) /*!< Input FIFO is not Full */
+#define CRYP_FLAG_OFNE ((uint32_t)0x00000004) /*!< Output FIFO is not empty */
+#define CRYP_FLAG_OFFU ((uint32_t)0x00000008) /*!< Output FIFO is Full */
+#define CRYP_FLAG_OUTRIS ((uint32_t)0x01000002) /*!< Output FIFO service raw
+ interrupt status */
+#define CRYP_FLAG_INRIS ((uint32_t)0x01000001) /*!< Input FIFO service raw
+ interrupt status */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset CRYP handle state
+ * @param __HANDLE__: specifies the CRYP handle.
+ * @retval None
+ */
+#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRYP_STATE_RESET)
+
+/**
+ * @brief Enable/Disable the CRYP peripheral.
+ * @param None
+ * @retval None
+ */
+#define __HAL_CRYP_ENABLE() (CRYP->CR |= CRYP_CR_CRYPEN)
+#define __HAL_CRYP_DISABLE() (CRYP->CR &= ~CRYP_CR_CRYPEN)
+
+/**
+ * @brief Flush the data FIFO.
+ * @param None
+ * @retval None
+ */
+#define __HAL_CRYP_FIFO_FLUSH() (CRYP->CR |= CRYP_CR_FFLUSH)
+
+/**
+ * @brief Set the algorithm mode: AES-ECB, AES-CBC, AES-CTR, DES-ECB, DES-CBC.
+ * @param MODE: The algorithm mode.
+ * @retval None
+ */
+#define __HAL_CRYP_SET_MODE(MODE) CRYP->CR |= (uint32_t)(MODE)
+
+/** @brief Check whether the specified CRYP flag is set or not.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg CRYP_FLAG_BUSY: The CRYP core is currently processing a block of data
+ * or a key preparation (for AES decryption).
+ * @arg CRYP_FLAG_IFEM: Input FIFO is empty
+ * @arg CRYP_FLAG_IFNF: Input FIFO is not full
+ * @arg CRYP_FLAG_INRIS: Input FIFO service raw interrupt is pending
+ * @arg CRYP_FLAG_OFNE: Output FIFO is not empty
+ * @arg CRYP_FLAG_OFFU: Output FIFO is full
+ * @arg CRYP_FLAG_OUTRIS: Input FIFO service raw interrupt is pending
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define CRYP_FLAG_MASK ((uint32_t)0x0000001F)
+#define __HAL_CRYP_GET_FLAG(__FLAG__) ((((uint8_t)((__FLAG__) >> 24)) == 0x01)?(((CRYP->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)): \
+ (((CRYP->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)))
+
+/** @brief Check whether the specified CRYP interrupt is set or not.
+ * @param __INTERRUPT__: specifies the interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg CRYP_IT_INRIS: Input FIFO service raw interrupt is pending
+ * @arg CRYP_IT_OUTRIS: Output FIFO service raw interrupt is pending
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_CRYP_GET_IT(__INTERRUPT__) ((CRYP->MISR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+ * @brief Enable the CRYP interrupt.
+ * @param __INTERRUPT__: CRYP Interrupt.
+ * @retval None
+ */
+#define __HAL_CRYP_ENABLE_IT(__INTERRUPT__) ((CRYP->IMSCR) |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the CRYP interrupt.
+ * @param __INTERRUPT__: CRYP interrupt.
+ * @retval None
+ */
+#define __HAL_CRYP_DISABLE_IT(__INTERRUPT__) ((CRYP->IMSCR) &= ~(__INTERRUPT__))
+
+/* Include CRYP HAL Extension module */
+#include "stm32f4xx_hal_cryp_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp);
+HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp);
+
+/* AES encryption/decryption using polling ***********************************/
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+
+/* AES encryption/decryption using interrupt *********************************/
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* AES encryption/decryption using DMA ***************************************/
+HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* DES encryption/decryption using polling ***********************************/
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+
+/* DES encryption/decryption using interrupt *********************************/
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* DES encryption/decryption using DMA ***************************************/
+HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* TDES encryption/decryption using polling **********************************/
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+
+/* TDES encryption/decryption using interrupt ********************************/
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* TDES encryption/decryption using DMA **************************************/
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* Processing functions ******************************************************/
+void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp);
+
+/* Peripheral State functions ************************************************/
+HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp);
+
+/* MSP functions *************************************************************/
+void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp);
+
+/* CallBack functions ********************************************************/
+void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp);
+void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp);
+
+#endif /* STM32F415xx || STM32F417xx || STM32F437xx || STM32F439xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CRYP_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_cryp_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,146 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_cryp_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of CRYP HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CRYP_EX_H
+#define __STM32F4xx_HAL_CRYP_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F437xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CRYPEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CRYPEx_Exported_Constants
+ * @{
+ */
+
+/** @defgroup CRYPEx_AlgoModeDirection
+ * @{
+ */
+#define CRYP_CR_ALGOMODE_AES_GCM_ENCRYPT ((uint32_t)0x00080000)
+#define CRYP_CR_ALGOMODE_AES_GCM_DECRYPT ((uint32_t)0x00080004)
+#define CRYP_CR_ALGOMODE_AES_CCM_ENCRYPT ((uint32_t)0x00080008)
+#define CRYP_CR_ALGOMODE_AES_CCM_DECRYPT ((uint32_t)0x0008000C)
+/**
+ * @}
+ */
+
+/** @defgroup CRYPEx_PhaseConfig
+ * The phases are relevant only to AES-GCM and AES-CCM
+ * @{
+ */
+#define CRYP_PHASE_INIT ((uint32_t)0x00000000)
+#define CRYP_PHASE_HEADER CRYP_CR_GCM_CCMPH_0
+#define CRYP_PHASE_PAYLOAD CRYP_CR_GCM_CCMPH_1
+#define CRYP_PHASE_FINAL CRYP_CR_GCM_CCMPH
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/**
+ * @brief Set the phase: Init, header, payload, final.
+ * This is relevant only for GCM and CCM modes.
+ * @param PHASE: The phase.
+ * @retval None
+ */
+#define __HAL_CRYP_SET_PHASE(PHASE) do{CRYP->CR &= (uint32_t)(~CRYP_CR_GCM_CCMPH);\
+ CRYP->CR |= (uint32_t)(PHASE);\
+ }while(0)
+
+
+/* Exported functions --------------------------------------------------------*/
+
+/* AES encryption/decryption using polling ***********************************/
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Finish(CRYP_HandleTypeDef *hcryp, uint16_t Size, uint8_t *AuthTag, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Finish(CRYP_HandleTypeDef *hcryp, uint8_t *AuthTag, uint32_t Timeout);
+
+/* AES encryption/decryption using interrupt *********************************/
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+/* AES encryption/decryption using DMA ***************************************/
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData);
+HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData);
+
+
+/* Processing functions ********************************************************/
+void HAL_CRYPEx_GCMCCM_IRQHandler(CRYP_HandleTypeDef *hcryp);
+
+#endif /* STM32F437xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CRYP_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_dac.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,331 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dac.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of DAC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DAC_H
+#define __STM32F4xx_HAL_DAC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DAC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_DAC_STATE_RESET = 0x00, /*!< DAC not yet initialized or disabled */
+ HAL_DAC_STATE_READY = 0x01, /*!< DAC initialized and ready for use */
+ HAL_DAC_STATE_BUSY = 0x02, /*!< DAC internal processing is ongoing */
+ HAL_DAC_STATE_TIMEOUT = 0x03, /*!< DAC timeout state */
+ HAL_DAC_STATE_ERROR = 0x04 /*!< DAC error state */
+}HAL_DAC_StateTypeDef;
+
+/**
+ * @brief DAC handle Structure definition
+ */
+typedef struct
+{
+ DAC_TypeDef *Instance; /*!< Register base address */
+
+ __IO HAL_DAC_StateTypeDef State; /*!< DAC communication state */
+
+ HAL_LockTypeDef Lock; /*!< DAC locking object */
+
+ DMA_HandleTypeDef *DMA_Handle1; /*!< Pointer DMA handler for channel 1 */
+
+ DMA_HandleTypeDef *DMA_Handle2; /*!< Pointer DMA handler for channel 2 */
+
+ __IO uint32_t ErrorCode; /*!< DAC Error code */
+
+}DAC_HandleTypeDef;
+
+/**
+ * @brief DAC Configuration regular Channel structure definition
+ */
+typedef struct
+{
+ uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel.
+ This parameter can be a value of @ref DAC_trigger_selection */
+
+ uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled.
+ This parameter can be a value of @ref DAC_output_buffer */
+}DAC_ChannelConfTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DAC_Error_Code
+ * @{
+ */
+#define HAL_DAC_ERROR_NONE 0x00 /*!< No error */
+#define HAL_DAC_ERROR_DMAUNDERRUNCH1 0x01 /*!< DAC channel1 DAM underrun error */
+#define HAL_DAC_ERROR_DMAUNDERRUNCH2 0x02 /*!< DAC channel2 DAM underrun error */
+#define HAL_DAC_ERROR_DMA 0x04 /*!< DMA error */
+/**
+ * @}
+ */
+
+/** @defgroup DAC_trigger_selection
+ * @{
+ */
+
+#define DAC_TRIGGER_NONE ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
+ has been loaded, and not by external trigger */
+#define DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T4_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T5_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T6_TRGO ((uint32_t)DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T7_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T8_TRGO ((uint32_t)(DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel */
+
+#define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
+ ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T8_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T5_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T4_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+ ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_output_buffer
+ * @{
+ */
+#define DAC_OUTPUTBUFFER_ENABLE ((uint32_t)0x00000000)
+#define DAC_OUTPUTBUFFER_DISABLE ((uint32_t)DAC_CR_BOFF1)
+
+#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OUTPUTBUFFER_ENABLE) || \
+ ((STATE) == DAC_OUTPUTBUFFER_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Channel_selection
+ * @{
+ */
+#define DAC_CHANNEL_1 ((uint32_t)0x00000000)
+#define DAC_CHANNEL_2 ((uint32_t)0x00000010)
+
+#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1) || \
+ ((CHANNEL) == DAC_CHANNEL_2))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_data_alignement
+ * @{
+ */
+#define DAC_ALIGN_12B_R ((uint32_t)0x00000000)
+#define DAC_ALIGN_12B_L ((uint32_t)0x00000004)
+#define DAC_ALIGN_8B_R ((uint32_t)0x00000008)
+
+#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_ALIGN_12B_R) || \
+ ((ALIGN) == DAC_ALIGN_12B_L) || \
+ ((ALIGN) == DAC_ALIGN_8B_R))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_data
+ * @{
+ */
+#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0)
+/**
+ * @}
+ */
+
+/** @defgroup DAC_flags_definition
+ * @{
+ */
+#define DAC_FLAG_DMAUDR1 ((uint32_t)DAC_SR_DMAUDR1)
+#define DAC_FLAG_DMAUDR2 ((uint32_t)DAC_SR_DMAUDR2)
+
+#define IS_DAC_FLAG(FLAG) (((FLAG) == DAC_FLAG_DMAUDR1) || \
+ ((FLAG) == DAC_FLAG_DMAUDR2))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_IT_definition
+ * @{
+ */
+#define DAC_IT_DMAUDR1 ((uint32_t)DAC_SR_DMAUDR1)
+#define DAC_IT_DMAUDR2 ((uint32_t)DAC_SR_DMAUDR2)
+
+#define IS_DAC_IT(IT) (((IT) == DAC_IT_DMAUDR1) || \
+ ((IT) == DAC_IT_DMAUDR2))
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset DAC handle state
+ * @param __HANDLE__: specifies the DAC handle.
+ * @retval None
+ */
+#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DAC_STATE_RESET)
+
+/** @brief Enable the DAC channel
+ * @param __HANDLE__: specifies the DAC handle.
+ * @param __DAC_Channel__: specifies the DAC channel
+ * @retval None
+ */
+#define __HAL_DAC_ENABLE(__HANDLE__, __DAC_Channel__) \
+((__HANDLE__)->Instance->CR |= (DAC_CR_EN1 << (__DAC_Channel__)))
+
+/** @brief Disable the DAC channel
+ * @param __HANDLE__: specifies the DAC handle
+ * @param __DAC_Channel__: specifies the DAC channel.
+ * @retval None
+ */
+#define __HAL_DAC_DISABLE(__HANDLE__, __DAC_Channel__) \
+((__HANDLE__)->Instance->CR &= ~(DAC_CR_EN1 << (__DAC_Channel__)))
+
+/** @brief Set DHR12R1 alignment
+ * @param __ALIGNEMENT__: specifies the DAC alignement
+ * @retval None
+ */
+#define __HAL_DHR12R1_ALIGNEMENT(__ALIGNEMENT__) (((uint32_t)0x00000008) + (__ALIGNEMENT__))
+
+/** @brief Set DHR12R2 alignment
+ * @param __ALIGNEMENT__: specifies the DAC alignement
+ * @retval None
+ */
+#define __HAL_DHR12R2_ALIGNEMENT(__ALIGNEMENT__) (((uint32_t)0x00000014) + (__ALIGNEMENT__))
+
+/** @brief Set DHR12RD alignment
+ * @param __ALIGNEMENT__: specifies the DAC alignement
+ * @retval None
+ */
+#define __HAL_DHR12RD_ALIGNEMENT(__ALIGNEMENT__) (((uint32_t)0x00000020) + (__ALIGNEMENT__))
+
+/** @brief Enable the DAC interrupt
+ * @param __HANDLE__: specifies the DAC handle
+ * @param __INTERRUPT__: specifies the DAC interrupt.
+ * @retval None
+ */
+#define __HAL_DAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__))
+
+/** @brief Disable the DAC interrupt
+ * @param __HANDLE__: specifies the DAC handle
+ * @param __INTERRUPT__: specifies the DAC interrupt.
+ * @retval None
+ */
+#define __HAL_DAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__))
+
+/** @brief Get the selected DAC's flag status.
+ * @param __HANDLE__: specifies the DAC handle.
+ * @retval None
+ */
+#define __HAL_DAC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the DAC's flag.
+ * @param __HANDLE__: specifies the DAC handle.
+ * @retval None
+ */
+#define __HAL_DAC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = (__FLAG__))
+
+/* Include DAC HAL Extension module */
+#include "stm32f4xx_hal_dac_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization/de-initialization functions *********************************/
+HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef* hdac);
+HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef* hdac);
+void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac);
+void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac);
+
+/* I/O operation functions ****************************************************/
+HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef* hdac, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t* pData, uint32_t Length, uint32_t Alignment);
+HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel);
+uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t Channel);
+
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data);
+
+/* Peripheral State functions *************************************************/
+HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef* hdac);
+void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac);
+uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac);
+
+void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef* hdac);
+void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef* hdac);
+void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac);
+void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac);
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_HAL_DAC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_dac_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,183 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dac.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of DAC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DAC_EX_H
+#define __STM32F4xx_HAL_DAC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DACEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL State structures definition
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DACEx_wave_generation
+ * @{
+ */
+#define DAC_WAVEGENERATION_NONE ((uint32_t)0x00000000)
+#define DAC_WAVEGENERATION_NOISE ((uint32_t)DAC_CR_WAVE1_0)
+#define DAC_WAVEGENERATION_TRIANGLE ((uint32_t)DAC_CR_WAVE1_1)
+
+#define IS_DAC_GENERATE_WAVE(WAVE) (((WAVE) == DAC_WAVEGENERATION_NONE) || \
+ ((WAVE) == DAC_WAVEGENERATION_NOISE) || \
+ ((WAVE) == DAC_WAVEGENERATION_TRIANGLE))
+/**
+ * @}
+ */
+
+/** @defgroup DACEx_lfsrunmask_triangleamplitude
+ * @{
+ */
+#define DAC_LFSRUNMASK_BIT0 ((uint32_t)0x00000000) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */
+#define DAC_LFSRUNMASK_BITS1_0 ((uint32_t)DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS2_0 ((uint32_t)DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS3_0 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0)/*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS4_0 ((uint32_t)DAC_CR_MAMP1_2) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS5_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS6_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS7_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS8_0 ((uint32_t)DAC_CR_MAMP1_3) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS9_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS10_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS11_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */
+#define DAC_TRIANGLEAMPLITUDE_1 ((uint32_t)0x00000000) /*!< Select max triangle amplitude of 1 */
+#define DAC_TRIANGLEAMPLITUDE_3 ((uint32_t)DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 3 */
+#define DAC_TRIANGLEAMPLITUDE_7 ((uint32_t)DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 7 */
+#define DAC_TRIANGLEAMPLITUDE_15 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 15 */
+#define DAC_TRIANGLEAMPLITUDE_31 ((uint32_t)DAC_CR_MAMP1_2) /*!< Select max triangle amplitude of 31 */
+#define DAC_TRIANGLEAMPLITUDE_63 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 63 */
+#define DAC_TRIANGLEAMPLITUDE_127 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 127 */
+#define DAC_TRIANGLEAMPLITUDE_255 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 255 */
+#define DAC_TRIANGLEAMPLITUDE_511 ((uint32_t)DAC_CR_MAMP1_3) /*!< Select max triangle amplitude of 511 */
+#define DAC_TRIANGLEAMPLITUDE_1023 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 1023 */
+#define DAC_TRIANGLEAMPLITUDE_2047 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 2047 */
+#define DAC_TRIANGLEAMPLITUDE_4095 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 4095 */
+
+#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUNMASK_BIT0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS1_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS2_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS3_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS4_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS5_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS6_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS7_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS8_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS9_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS10_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS11_0) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_1) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_3) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_7) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_15) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_31) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_63) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_127) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_255) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_511) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_1023) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_2047) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_4095))
+/**
+ * @}
+ */
+
+/** @defgroup DACEx_wave_generation
+ * @{
+ */
+#define DAC_WAVE_NOISE ((uint32_t)DAC_CR_WAVE1_0)
+#define DAC_WAVE_TRIANGLE ((uint32_t)DAC_CR_WAVE1_1)
+
+#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NOISE) || \
+ ((WAVE) == DAC_WAVE_TRIANGLE))
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/* Extension features functions ***********************************************/
+uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac);
+HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude);
+HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude);
+HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2);
+
+void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef* hdac);
+
+void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma);
+void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma);
+void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma);
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F4xx_HAL_DAC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_dcmi.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,498 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dcmi.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of DCMI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DCMI_H
+#define __STM32F4xx_HAL_DCMI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DCMI
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief DCMI Error source
+ */
+typedef enum
+{
+ DCMI_ERROR_SYNC = 1, /*!< Synchronisation error */
+ DCMI_OVERRUN = 2, /*!< DCMI Overrun */
+}DCMI_ErrorTypeDef;
+
+/**
+ * @brief DCMI Embedded Synchronisation CODE Init structure definition
+ */
+typedef struct
+{
+ uint8_t FrameStartCode; /*!< Specifies the code of the frame start delimiter. */
+ uint8_t LineStartCode; /*!< Specifies the code of the line start delimiter. */
+ uint8_t LineEndCode; /*!< Specifies the code of the line end delimiter. */
+ uint8_t FrameEndCode; /*!< Specifies the code of the frame end delimiter. */
+}DCMI_CodesInitTypeDef;
+
+/**
+ * @brief DCMI Init structure definition
+ */
+typedef struct
+{
+ uint32_t SynchroMode; /*!< Specifies the Synchronization Mode: Hardware or Embedded.
+ This parameter can be a value of @ref DCMI_Synchronization_Mode */
+
+ uint32_t PCKPolarity; /*!< Specifies the Pixel clock polarity: Falling or Rising.
+ This parameter can be a value of @ref DCMI_PIXCK_Polarity */
+
+ uint32_t VSPolarity; /*!< Specifies the Vertical synchronization polarity: High or Low.
+ This parameter can be a value of @ref DCMI_VSYNC_Polarity */
+
+ uint32_t HSPolarity; /*!< Specifies the Horizontal synchronization polarity: High or Low.
+ This parameter can be a value of @ref DCMI_HSYNC_Polarity */
+
+ uint32_t CaptureRate; /*!< Specifies the frequency of frame capture: All, 1/2 or 1/4.
+ This parameter can be a value of @ref DCMI_Capture_Rate */
+
+ uint32_t ExtendedDataMode; /*!< Specifies the data width: 8-bit, 10-bit, 12-bit or 14-bit.
+ This parameter can be a value of @ref DCMI_Extended_Data_Mode */
+
+ DCMI_CodesInitTypeDef SyncroCode; /*!< Specifies the code of the frame start delimiter. */
+
+ uint32_t JPEGMode; /*!< Enable or Disable the JPEG mode.
+ This parameter can be a value of @ref DCMI_MODE_JPEG */
+
+}DCMI_InitTypeDef;
+
+/**
+ * @brief HAL DCMI State structures definition
+ */
+typedef enum
+{
+ HAL_DCMI_STATE_RESET = 0x00, /*!< DCMI not yet initialized or disabled */
+ HAL_DCMI_STATE_READY = 0x01, /*!< DCMI initialized and ready for use */
+ HAL_DCMI_STATE_BUSY = 0x02, /*!< DCMI internal processing is ongoing */
+ HAL_DCMI_STATE_TIMEOUT = 0x03, /*!< DCMI timeout state */
+ HAL_DCMI_STATE_ERROR = 0x04 /*!< DCMI error state */
+}HAL_DCMI_StateTypeDef;
+
+/**
+ * @brief DCMI handle Structure definition
+ */
+typedef struct
+{
+ DCMI_TypeDef *Instance; /*!< DCMI Register base address */
+
+ DCMI_InitTypeDef Init; /*!< DCMI parameters */
+
+ HAL_LockTypeDef Lock; /*!< DCMI locking object */
+
+ __IO HAL_DCMI_StateTypeDef State; /*!< DCMI state */
+
+ __IO uint32_t XferCount; /*!< DMA transfer counter */
+
+ __IO uint32_t XferSize; /*!< DMA transfer size */
+
+ uint32_t XferTransferNumber; /*!< DMA transfer number */
+
+ uint32_t pBuffPtr; /*!< Pointer to DMA output buffer */
+
+ DMA_HandleTypeDef *DMA_Handle; /*!< Pointer to the DMA handler */
+
+ __IO uint32_t ErrorCode; /*!< DCMI Error code */
+
+}DCMI_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DCMI_Exported_Constants
+ * @{
+ */
+
+/** @defgroup DCMI_Error_Code
+ * @{
+ */
+#define HAL_DCMI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_DCMI_ERROR_OVF ((uint32_t)0x00000001) /*!< Overflow error */
+#define HAL_DCMI_ERROR_SYNC ((uint32_t)0x00000002) /*!< Synchronization error */
+#define HAL_DCMI_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Capture_Mode
+ * @{
+ */
+#define DCMI_MODE_CONTINUOUS ((uint32_t)0x00000000) /*!< The received data are transferred continuously
+ into the destination memory through the DMA */
+#define DCMI_MODE_SNAPSHOT ((uint32_t)DCMI_CR_CM) /*!< Once activated, the interface waits for the start of
+ frame and then transfers a single frame through the DMA */
+
+#define IS_DCMI_CAPTURE_MODE(MODE)(((MODE) == DCMI_MODE_CONTINUOUS) || \
+ ((MODE) == DCMI_MODE_SNAPSHOT))
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Synchronization_Mode
+ * @{
+ */
+#define DCMI_SYNCHRO_HARDWARE ((uint32_t)0x00000000) /*!< Hardware synchronization data capture (frame/line start/stop)
+ is synchronized with the HSYNC/VSYNC signals */
+#define DCMI_SYNCHRO_EMBEDDED ((uint32_t)DCMI_CR_ESS) /*!< Embedded synchronization data capture is synchronized with
+ synchronization codes embedded in the data flow */
+
+#define IS_DCMI_SYNCHRO(MODE)(((MODE) == DCMI_SYNCHRO_HARDWARE) || \
+ ((MODE) == DCMI_SYNCHRO_EMBEDDED))
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_PIXCK_Polarity
+ * @{
+ */
+#define DCMI_PCKPOLARITY_FALLING ((uint32_t)0x00000000) /*!< Pixel clock active on Falling edge */
+#define DCMI_PCKPOLARITY_RISING ((uint32_t)DCMI_CR_PCKPOL) /*!< Pixel clock active on Rising edge */
+
+#define IS_DCMI_PCKPOLARITY(POLARITY)(((POLARITY) == DCMI_PCKPOLARITY_FALLING) || \
+ ((POLARITY) == DCMI_PCKPOLARITY_RISING))
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_VSYNC_Polarity
+ * @{
+ */
+#define DCMI_VSPOLARITY_LOW ((uint32_t)0x00000000) /*!< Vertical synchronization active Low */
+#define DCMI_VSPOLARITY_HIGH ((uint32_t)DCMI_CR_VSPOL) /*!< Vertical synchronization active High */
+
+#define IS_DCMI_VSPOLARITY(POLARITY)(((POLARITY) == DCMI_VSPOLARITY_LOW) || \
+ ((POLARITY) == DCMI_VSPOLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_HSYNC_Polarity
+ * @{
+ */
+#define DCMI_HSPOLARITY_LOW ((uint32_t)0x00000000) /*!< Horizontal synchronization active Low */
+#define DCMI_HSPOLARITY_HIGH ((uint32_t)DCMI_CR_HSPOL) /*!< Horizontal synchronization active High */
+
+#define IS_DCMI_HSPOLARITY(POLARITY)(((POLARITY) == DCMI_HSPOLARITY_LOW) || \
+ ((POLARITY) == DCMI_HSPOLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_MODE_JPEG
+ * @{
+ */
+#define DCMI_JPEG_DISABLE ((uint32_t)0x00000000) /*!< Mode JPEG Disabled */
+#define DCMI_JPEG_ENABLE ((uint32_t)DCMI_CR_JPEG) /*!< Mode JPEG Enabled */
+
+#define IS_DCMI_MODE_JPEG(JPEG_MODE)(((JPEG_MODE) == DCMI_JPEG_DISABLE) || \
+ ((JPEG_MODE) == DCMI_JPEG_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Capture_Rate
+ * @{
+ */
+#define DCMI_CR_ALL_FRAME ((uint32_t)0x00000000) /*!< All frames are captured */
+#define DCMI_CR_ALTERNATE_2_FRAME ((uint32_t)DCMI_CR_FCRC_0) /*!< Every alternate frame captured */
+#define DCMI_CR_ALTERNATE_4_FRAME ((uint32_t)DCMI_CR_FCRC_1) /*!< One frame in 4 frames captured */
+
+#define IS_DCMI_CAPTURE_RATE(RATE) (((RATE) == DCMI_CR_ALL_FRAME) || \
+ ((RATE) == DCMI_CR_ALTERNATE_2_FRAME) || \
+ ((RATE) == DCMI_CR_ALTERNATE_4_FRAME))
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Extended_Data_Mode
+ * @{
+ */
+#define DCMI_EXTEND_DATA_8B ((uint32_t)0x00000000) /*!< Interface captures 8-bit data on every pixel clock */
+#define DCMI_EXTEND_DATA_10B ((uint32_t)DCMI_CR_EDM_0) /*!< Interface captures 10-bit data on every pixel clock */
+#define DCMI_EXTEND_DATA_12B ((uint32_t)DCMI_CR_EDM_1) /*!< Interface captures 12-bit data on every pixel clock */
+#define DCMI_EXTEND_DATA_14B ((uint32_t)(DCMI_CR_EDM_0 | DCMI_CR_EDM_1)) /*!< Interface captures 14-bit data on every pixel clock */
+
+#define IS_DCMI_EXTENDED_DATA(DATA)(((DATA) == DCMI_EXTEND_DATA_8B) || \
+ ((DATA) == DCMI_EXTEND_DATA_10B) || \
+ ((DATA) == DCMI_EXTEND_DATA_12B) || \
+ ((DATA) == DCMI_EXTEND_DATA_14B))
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Window_Coordinate
+ * @{
+ */
+#define DCMI_WINDOW_COORDINATE ((uint32_t)0x3FFF) /*!< Window coordinate */
+
+#define IS_DCMI_WINDOW_COORDINATE(COORDINATE) ((COORDINATE) <= DCMI_WINDOW_COORDINATE)
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Window_Height
+ * @{
+ */
+#define DCMI_WINDOW_HEIGHT ((uint32_t)0x1FFF) /*!< Window Height */
+
+#define IS_DCMI_WINDOW_HEIGHT(HEIGHT) ((HEIGHT) <= DCMI_WINDOW_HEIGHT)
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_interrupt_sources
+ * @{
+ */
+#define DCMI_IT_FRAME ((uint32_t)DCMI_IER_FRAME_IE)
+#define DCMI_IT_OVF ((uint32_t)DCMI_IER_OVF_IE)
+#define DCMI_IT_ERR ((uint32_t)DCMI_IER_ERR_IE)
+#define DCMI_IT_VSYNC ((uint32_t)DCMI_IER_VSYNC_IE)
+#define DCMI_IT_LINE ((uint32_t)DCMI_IER_LINE_IE)
+
+#define IS_DCMI_CONFIG_IT(IT) ((((IT) & (uint16_t)0xFFE0) == 0x0000) && ((IT) != 0x0000))
+
+#define IS_DCMI_GET_IT(IT) (((IT) == DCMI_IT_FRAME) || \
+ ((IT) == DCMI_IT_OVF) || \
+ ((IT) == DCMI_IT_ERR) || \
+ ((IT) == DCMI_IT_VSYNC) || \
+ ((IT) == DCMI_IT_LINE))
+/**
+ * @}
+ */
+
+/** @defgroup DCMI_Flags
+ * @{
+ */
+
+/**
+ * @brief DCMI SR register
+ */
+#define DCMI_FLAG_HSYNC ((uint32_t)0x2001)
+#define DCMI_FLAG_VSYNC ((uint32_t)0x2002)
+#define DCMI_FLAG_FNE ((uint32_t)0x2004)
+/**
+ * @brief DCMI RISR register
+ */
+#define DCMI_FLAG_FRAMERI ((uint32_t)DCMI_RISR_FRAME_RIS)
+#define DCMI_FLAG_OVFRI ((uint32_t)DCMI_RISR_OVF_RIS)
+#define DCMI_FLAG_ERRRI ((uint32_t)DCMI_RISR_ERR_RIS)
+#define DCMI_FLAG_VSYNCRI ((uint32_t)DCMI_RISR_VSYNC_RIS)
+#define DCMI_FLAG_LINERI ((uint32_t)DCMI_RISR_LINE_RIS)
+/**
+ * @brief DCMI MISR register
+ */
+#define DCMI_FLAG_FRAMEMI ((uint32_t)0x1001)
+#define DCMI_FLAG_OVFMI ((uint32_t)0x1002)
+#define DCMI_FLAG_ERRMI ((uint32_t)0x1004)
+#define DCMI_FLAG_VSYNCMI ((uint32_t)0x1008)
+#define DCMI_FLAG_LINEMI ((uint32_t)0x1010)
+#define IS_DCMI_GET_FLAG(FLAG) (((FLAG) == DCMI_FLAG_HSYNC) || \
+ ((FLAG) == DCMI_FLAG_VSYNC) || \
+ ((FLAG) == DCMI_FLAG_FNE) || \
+ ((FLAG) == DCMI_FLAG_FRAMERI) || \
+ ((FLAG) == DCMI_FLAG_OVFRI) || \
+ ((FLAG) == DCMI_FLAG_ERRRI) || \
+ ((FLAG) == DCMI_FLAG_VSYNCRI) || \
+ ((FLAG) == DCMI_FLAG_LINERI) || \
+ ((FLAG) == DCMI_FLAG_FRAMEMI) || \
+ ((FLAG) == DCMI_FLAG_OVFMI) || \
+ ((FLAG) == DCMI_FLAG_ERRMI) || \
+ ((FLAG) == DCMI_FLAG_VSYNCMI) || \
+ ((FLAG) == DCMI_FLAG_LINEMI))
+
+#define IS_DCMI_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFE0) == 0x0000) && ((FLAG) != 0x0000))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset DCMI handle state
+ * @param __HANDLE__: specifies the DCMI handle.
+ * @retval None
+ */
+#define __HAL_DCMI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DCMI_STATE_RESET)
+
+/**
+ * @brief Enable the DCMI.
+ * @param __HANDLE__: DCMI handle
+ * @retval None
+ */
+#define __HAL_DCMI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DCMI_CR_ENABLE)
+
+/**
+ * @brief Disable the DCMI.
+ * @param __HANDLE__: DCMI handle
+ * @retval None
+ */
+#define __HAL_DCMI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(DCMI_CR_ENABLE))
+
+/* Interrupt & Flag management */
+/**
+ * @brief Get the DCMI pending flags.
+ * @param __HANDLE__: DCMI handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask
+ * @arg DCMI_FLAG_OVFRI: Overflow flag mask
+ * @arg DCMI_FLAG_ERRRI: Synchronization error flag mask
+ * @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask
+ * @arg DCMI_FLAG_LINERI: Line flag mask
+ * @retval The state of FLAG.
+ */
+#define __HAL_DCMI_GET_FLAG(__HANDLE__, __FLAG__)\
+((((__FLAG__) & 0x3000) == 0x0)? ((__HANDLE__)->Instance->RISR & (__FLAG__)) :\
+ (((__FLAG__) & 0x2000) == 0x0)? ((__HANDLE__)->Instance->MISR & (__FLAG__)) : ((__HANDLE__)->Instance->SR & (__FLAG__)))
+
+/**
+ * @brief Clear the DCMI pending flags.
+ * @param __HANDLE__: DCMI handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask
+ * @arg DCMI_FLAG_OVFRI: Overflow flag mask
+ * @arg DCMI_FLAG_ERRRI: Synchronization error flag mask
+ * @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask
+ * @arg DCMI_FLAG_LINERI: Line flag mask
+ * @retval None
+ */
+#define __HAL_DCMI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/**
+ * @brief Enable the specified DCMI interrupts.
+ * @param __HANDLE__: DCMI handle
+ * @param __INTERRUPT__: specifies the DCMI interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
+ * @arg DCMI_IT_OVF: Overflow interrupt mask
+ * @arg DCMI_IT_ERR: Synchronization error interrupt mask
+ * @arg DCMI_IT_VSYNC: VSYNC interrupt mask
+ * @arg DCMI_IT_LINE: Line interrupt mask
+ * @retval None
+ */
+#define __HAL_DCMI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified DCMI interrupts.
+ * @param __HANDLE__: DCMI handle
+ * @param __INTERRUPT__: specifies the DCMI interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
+ * @arg DCMI_IT_OVF: Overflow interrupt mask
+ * @arg DCMI_IT_ERR: Synchronization error interrupt mask
+ * @arg DCMI_IT_VSYNC: VSYNC interrupt mask
+ * @arg DCMI_IT_LINE: Line interrupt mask
+ * @retval None
+ */
+#define __HAL_DCMI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified DCMI interrupt has occurred or not.
+ * @param __HANDLE__: DCMI handle
+ * @param __INTERRUPT__: specifies the DCMI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask
+ * @arg DCMI_IT_OVF: Overflow interrupt mask
+ * @arg DCMI_IT_ERR: Synchronization error interrupt mask
+ * @arg DCMI_IT_VSYNC: VSYNC interrupt mask
+ * @arg DCMI_IT_LINE: Line interrupt mask
+ * @retval The state of INTERRUPT.
+ */
+#define __HAL_DCMI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MISR & (__INTERRUPT__))
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi);
+HAL_StatusTypeDef HAL_DCMI_DeInit(DCMI_HandleTypeDef *hdcmi);
+void HAL_DCMI_MspInit(DCMI_HandleTypeDef* hdcmi);
+void HAL_DCMI_MspDeInit(DCMI_HandleTypeDef* hdcmi);
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_DCMI_Start_DMA(DCMI_HandleTypeDef* hdcmi, uint32_t DCMI_Mode, uint32_t pData, uint32_t Length);
+HAL_StatusTypeDef HAL_DCMI_Stop(DCMI_HandleTypeDef* hdcmi);
+void HAL_DCMI_ErrorCallback(DCMI_HandleTypeDef *hdcmi);
+void HAL_DCMI_LineEventCallback(DCMI_HandleTypeDef *hdcmi);
+void HAL_DCMI_FrameEventCallback(DCMI_HandleTypeDef *hdcmi);
+void HAL_DCMI_VsyncEventCallback(DCMI_HandleTypeDef *hdcmi);
+void HAL_DCMI_IRQHandler(DCMI_HandleTypeDef *hdcmi);
+
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_DCMI_ConfigCROP(DCMI_HandleTypeDef *hdcmi, uint32_t X0, uint32_t Y0, uint32_t XSize, uint32_t YSize);
+HAL_StatusTypeDef HAL_DCMI_EnableCROP(DCMI_HandleTypeDef *hdcmi);
+HAL_StatusTypeDef HAL_DCMI_DisableCROP(DCMI_HandleTypeDef *hdcmi);
+
+/* Peripheral State functions *************************************************/
+HAL_DCMI_StateTypeDef HAL_DCMI_GetState(DCMI_HandleTypeDef *hdcmi);
+uint32_t HAL_DCMI_GetError(DCMI_HandleTypeDef *hdcmi);
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_DCMI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_def.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,198 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_def.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief This file contains HAL common defines, enumeration, macros and
+ * structures definitions.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DEF
+#define __STM32F4xx_HAL_DEF
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx.h"
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL Status structures definition
+ */
+typedef enum
+{
+ HAL_OK = 0x00,
+ HAL_ERROR = 0x01,
+ HAL_BUSY = 0x02,
+ HAL_TIMEOUT = 0x03
+} HAL_StatusTypeDef;
+
+/**
+ * @brief HAL Lock structures definition
+ */
+typedef enum
+{
+ HAL_UNLOCKED = 0x00,
+ HAL_LOCKED = 0x01
+} HAL_LockTypeDef;
+
+/* Exported macro ------------------------------------------------------------*/
+#ifndef NULL
+ #define HAL_NULL (void *) 0
+#endif
+
+#define HAL_MAX_DELAY 0xFFFFFFFF
+
+#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) != RESET)
+#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == RESET)
+
+#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \
+ do{ \
+ (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \
+ (__DMA_HANDLE__).Parent = (__HANDLE__); \
+ } while(0)
+
+/** @brief Reset the Handle's State field.
+ * @param __HANDLE__: specifies the Peripheral Handle.
+ * @note This macro can be used for the following purpose:
+ * - When the Handle is declared as local variable; before passing it as parameter
+ * to HAL_PPP_Init() for the first time, it is mandatory to use this macro
+ * to set to 0 the Handle's "State" field.
+ * Otherwise, "State" field may have any random value and the first time the function
+ * HAL_PPP_Init() is called, the low level hardware initialization will be missed
+ * (i.e. HAL_PPP_MspInit() will not be executed).
+ * - When there is a need to reconfigure the low level hardware: instead of calling
+ * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
+ * In this later function, when the Handle's "State" field is set to 0, it will execute the function
+ * HAL_PPP_MspInit() which will reconfigure the low level hardware.
+ * @retval None
+ */
+#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0)
+
+#if (USE_RTOS == 1)
+ /* Reserved for future use */
+ #error USE_RTOS should be 0 in the current HAL release
+#else
+ #define __HAL_LOCK(__HANDLE__) \
+ do{ \
+ if((__HANDLE__)->Lock == HAL_LOCKED) \
+ { \
+ return HAL_BUSY; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Lock = HAL_LOCKED; \
+ } \
+ }while (0)
+
+ #define __HAL_UNLOCK(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Lock = HAL_UNLOCKED; \
+ }while (0)
+#endif /* USE_RTOS */
+
+#if defined ( __GNUC__ )
+ #ifndef __weak
+ #define __weak __attribute__((weak))
+ #endif /* __weak */
+ #ifndef __packed
+ #define __packed __attribute__((__packed__))
+ #endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
+#if defined (__GNUC__) /* GNU Compiler */
+ #ifndef __ALIGN_END
+ #define __ALIGN_END __attribute__ ((aligned (4)))
+ #endif /* __ALIGN_END */
+ #ifndef __ALIGN_BEGIN
+ #define __ALIGN_BEGIN
+ #endif /* __ALIGN_BEGIN */
+#else
+ #ifndef __ALIGN_END
+ #define __ALIGN_END
+ #endif /* __ALIGN_END */
+ #ifndef __ALIGN_BEGIN
+ #if defined (__CC_ARM) /* ARM Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #elif defined (__ICCARM__) /* IAR Compiler */
+ #define __ALIGN_BEGIN
+ #endif /* __CC_ARM */
+ #endif /* __ALIGN_BEGIN */
+#endif /* __GNUC__ */
+
+
+/**
+ * @brief __RAM_FUNC definition
+ */
+#if defined ( __CC_ARM )
+/* ARM Compiler
+ ------------
+ RAM functions are defined using the toolchain options.
+ Functions that are executed in RAM should reside in a separate source module.
+ Using the 'Options for File' dialog you can simply change the 'Code / Const'
+ area of a module to a memory space in physical RAM.
+ Available memory areas are declared in the 'Target' tab of the 'Options for Target'
+ dialog.
+*/
+#define __RAM_FUNC HAL_StatusTypeDef
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+ ---------------
+ RAM functions are defined using a specific toolchain keyword "__ramfunc".
+*/
+#define __RAM_FUNC __ramfunc HAL_StatusTypeDef
+
+#elif defined ( __GNUC__ )
+/* GNU Compiler
+ ------------
+ RAM functions are defined using a specific toolchain attribute
+ "__attribute__((section(".RamFunc")))".
+*/
+#define __RAM_FUNC HAL_StatusTypeDef __attribute__((section(".RamFunc")))
+
+#endif
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32F4xx_HAL_DEF */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_dma.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,697 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dma.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of DMA HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DMA_H
+#define __STM32F4xx_HAL_DMA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMA
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief DMA Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Channel; /*!< Specifies the channel used for the specified stream.
+ This parameter can be a value of @ref DMA_Channel_selection */
+
+ uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
+ from memory to memory or from peripheral to memory.
+ This parameter can be a value of @ref DMA_Data_transfer_direction */
+
+ uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Peripheral_incremented_mode */
+
+ uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Memory_incremented_mode */
+
+ uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width.
+ This parameter can be a value of @ref DMA_Peripheral_data_size */
+
+ uint32_t MemDataAlignment; /*!< Specifies the Memory data width.
+ This parameter can be a value of @ref DMA_Memory_data_size */
+
+ uint32_t Mode; /*!< Specifies the operation mode of the DMAy Streamx.
+ This parameter can be a value of @ref DMA_mode
+ @note The circular buffer mode cannot be used if the memory-to-memory
+ data transfer is configured on the selected Stream */
+
+ uint32_t Priority; /*!< Specifies the software priority for the DMAy Streamx.
+ This parameter can be a value of @ref DMA_Priority_level */
+
+ uint32_t FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream.
+ This parameter can be a value of @ref DMA_FIFO_direct_mode
+ @note The Direct mode (FIFO mode disabled) cannot be used if the
+ memory-to-memory data transfer is configured on the selected stream */
+
+ uint32_t FIFOThreshold; /*!< Specifies the FIFO threshold level.
+ This parameter can be a value of @ref DMA_FIFO_threshold_level */
+
+ uint32_t MemBurst; /*!< Specifies the Burst transfer configuration for the memory transfers.
+ It specifies the amount of data to be transferred in a single non interruptable
+ transaction.
+ This parameter can be a value of @ref DMA_Memory_burst
+ @note The burst mode is possible only if the address Increment mode is enabled. */
+
+ uint32_t PeriphBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers.
+ It specifies the amount of data to be transferred in a single non interruptable
+ transaction.
+ This parameter can be a value of @ref DMA_Peripheral_burst
+ @note The burst mode is possible only if the address Increment mode is enabled. */
+}DMA_InitTypeDef;
+
+/**
+ * @brief HAL DMA State structures definition
+ */
+typedef enum
+{
+ HAL_DMA_STATE_RESET = 0x00, /*!< DMA not yet initialized or disabled */
+ HAL_DMA_STATE_READY = 0x01, /*!< DMA initialized and ready for use */
+ HAL_DMA_STATE_READY_MEM0 = 0x11, /*!< DMA Mem0 process success */
+ HAL_DMA_STATE_READY_MEM1 = 0x21, /*!< DMA Mem1 process success */
+ HAL_DMA_STATE_READY_HALF_MEM0 = 0x31, /*!< DMA Mem0 Half process success */
+ HAL_DMA_STATE_READY_HALF_MEM1 = 0x41, /*!< DMA Mem1 Half process success */
+ HAL_DMA_STATE_BUSY = 0x02, /*!< DMA process is ongoing */
+ HAL_DMA_STATE_BUSY_MEM0 = 0x12, /*!< DMA Mem0 process is ongoing */
+ HAL_DMA_STATE_BUSY_MEM1 = 0x22, /*!< DMA Mem1 process is ongoing */
+ HAL_DMA_STATE_TIMEOUT = 0x03, /*!< DMA timeout state */
+ HAL_DMA_STATE_ERROR = 0x04, /*!< DMA error state */
+}HAL_DMA_StateTypeDef;
+
+/**
+ * @brief HAL DMA Error Code structure definition
+ */
+typedef enum
+{
+ HAL_DMA_FULL_TRANSFER = 0x00, /*!< Full transfer */
+ HAL_DMA_HALF_TRANSFER = 0x01, /*!< Half Transfer */
+}HAL_DMA_LevelCompleteTypeDef;
+
+/**
+ * @brief DMA handle Structure definition
+ */
+typedef struct __DMA_HandleTypeDef
+{
+ DMA_Stream_TypeDef *Instance; /*!< Register base address */
+
+ DMA_InitTypeDef Init; /*!< DMA communication parameters */
+
+ HAL_LockTypeDef Lock; /*!< DMA locking object */
+
+ __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */
+
+ void *Parent; /*!< Parent object state */
+
+ void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */
+
+ void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */
+
+ void (* XferM1CpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete Memory1 callback */
+
+ void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */
+
+ __IO uint32_t ErrorCode; /*!< DMA Error code */
+}DMA_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DMA_Exported_Constants
+ * @{
+ */
+
+/** @defgroup DMA_Error_Code
+ * @{
+ */
+#define HAL_DMA_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_DMA_ERROR_TE ((uint32_t)0x00000001) /*!< Transfer error */
+#define HAL_DMA_ERROR_FE ((uint32_t)0x00000002) /*!< FIFO error */
+#define HAL_DMA_ERROR_DME ((uint32_t)0x00000004) /*!< Direct Mode error */
+#define HAL_DMA_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Channel_selection
+ * @{
+ */
+#define DMA_CHANNEL_0 ((uint32_t)0x00000000) /*!< DMA Channel 0 */
+#define DMA_CHANNEL_1 ((uint32_t)0x02000000) /*!< DMA Channel 1 */
+#define DMA_CHANNEL_2 ((uint32_t)0x04000000) /*!< DMA Channel 2 */
+#define DMA_CHANNEL_3 ((uint32_t)0x06000000) /*!< DMA Channel 3 */
+#define DMA_CHANNEL_4 ((uint32_t)0x08000000) /*!< DMA Channel 4 */
+#define DMA_CHANNEL_5 ((uint32_t)0x0A000000) /*!< DMA Channel 5 */
+#define DMA_CHANNEL_6 ((uint32_t)0x0C000000) /*!< DMA Channel 6 */
+#define DMA_CHANNEL_7 ((uint32_t)0x0E000000) /*!< DMA Channel 7 */
+
+#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \
+ ((CHANNEL) == DMA_CHANNEL_1) || \
+ ((CHANNEL) == DMA_CHANNEL_2) || \
+ ((CHANNEL) == DMA_CHANNEL_3) || \
+ ((CHANNEL) == DMA_CHANNEL_4) || \
+ ((CHANNEL) == DMA_CHANNEL_5) || \
+ ((CHANNEL) == DMA_CHANNEL_6) || \
+ ((CHANNEL) == DMA_CHANNEL_7))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Data_transfer_direction
+ * @{
+ */
+#define DMA_PERIPH_TO_MEMORY ((uint32_t)0x00000000) /*!< Peripheral to memory direction */
+#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_SxCR_DIR_0) /*!< Memory to peripheral direction */
+#define DMA_MEMORY_TO_MEMORY ((uint32_t)DMA_SxCR_DIR_1) /*!< Memory to memory direction */
+
+#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
+ ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \
+ ((DIRECTION) == DMA_MEMORY_TO_MEMORY))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Data_buffer_size
+ * @{
+ */
+#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_incremented_mode
+ * @{
+ */
+#define DMA_PINC_ENABLE ((uint32_t)DMA_SxCR_PINC) /*!< Peripheral increment mode enable */
+#define DMA_PINC_DISABLE ((uint32_t)0x00000000) /*!< Peripheral increment mode disable */
+
+#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
+ ((STATE) == DMA_PINC_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Memory_incremented_mode
+ * @{
+ */
+#define DMA_MINC_ENABLE ((uint32_t)DMA_SxCR_MINC) /*!< Memory increment mode enable */
+#define DMA_MINC_DISABLE ((uint32_t)0x00000000) /*!< Memory increment mode disable */
+
+#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \
+ ((STATE) == DMA_MINC_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_data_size
+ * @{
+ */
+#define DMA_PDATAALIGN_BYTE ((uint32_t)0x00000000) /*!< Peripheral data alignment: Byte */
+#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_PSIZE_0) /*!< Peripheral data alignment: HalfWord */
+#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_SxCR_PSIZE_1) /*!< Peripheral data alignment: Word */
+
+#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_PDATAALIGN_WORD))
+/**
+ * @}
+ */
+
+
+/** @defgroup DMA_Memory_data_size
+ * @{
+ */
+#define DMA_MDATAALIGN_BYTE ((uint32_t)0x00000000) /*!< Memory data alignment: Byte */
+#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_MSIZE_0) /*!< Memory data alignment: HalfWord */
+#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_SxCR_MSIZE_1) /*!< Memory data alignment: Word */
+
+#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_MDATAALIGN_WORD ))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_mode
+ * @{
+ */
+#define DMA_NORMAL ((uint32_t)0x00000000) /*!< Normal mode */
+#define DMA_CIRCULAR ((uint32_t)DMA_SxCR_CIRC) /*!< Circular mode */
+#define DMA_PFCTRL ((uint32_t)DMA_SxCR_PFCTRL) /*!< Peripheral flow control mode */
+
+#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \
+ ((MODE) == DMA_CIRCULAR) || \
+ ((MODE) == DMA_PFCTRL))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Priority_level
+ * @{
+ */
+#define DMA_PRIORITY_LOW ((uint32_t)0x00000000) /*!< Priority level: Low */
+#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_SxCR_PL_0) /*!< Priority level: Medium */
+#define DMA_PRIORITY_HIGH ((uint32_t)DMA_SxCR_PL_1) /*!< Priority level: High */
+#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_SxCR_PL) /*!< Priority level: Very High */
+
+#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \
+ ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
+ ((PRIORITY) == DMA_PRIORITY_HIGH) || \
+ ((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_FIFO_direct_mode
+ * @{
+ */
+#define DMA_FIFOMODE_DISABLE ((uint32_t)0x00000000) /*!< FIFO mode disable */
+#define DMA_FIFOMODE_ENABLE ((uint32_t)DMA_SxFCR_DMDIS) /*!< FIFO mode enable */
+
+#define IS_DMA_FIFO_MODE_STATE(STATE) (((STATE) == DMA_FIFOMODE_DISABLE ) || \
+ ((STATE) == DMA_FIFOMODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_FIFO_threshold_level
+ * @{
+ */
+#define DMA_FIFO_THRESHOLD_1QUARTERFULL ((uint32_t)0x00000000) /*!< FIFO threshold 1 quart full configuration */
+#define DMA_FIFO_THRESHOLD_HALFFULL ((uint32_t)DMA_SxFCR_FTH_0) /*!< FIFO threshold half full configuration */
+#define DMA_FIFO_THRESHOLD_3QUARTERSFULL ((uint32_t)DMA_SxFCR_FTH_1) /*!< FIFO threshold 3 quarts full configuration */
+#define DMA_FIFO_THRESHOLD_FULL ((uint32_t)DMA_SxFCR_FTH) /*!< FIFO threshold full configuration */
+
+#define IS_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == DMA_FIFO_THRESHOLD_1QUARTERFULL ) || \
+ ((THRESHOLD) == DMA_FIFO_THRESHOLD_HALFFULL) || \
+ ((THRESHOLD) == DMA_FIFO_THRESHOLD_3QUARTERSFULL) || \
+ ((THRESHOLD) == DMA_FIFO_THRESHOLD_FULL))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Memory_burst
+ * @{
+ */
+#define DMA_MBURST_SINGLE ((uint32_t)0x00000000)
+#define DMA_MBURST_INC4 ((uint32_t)DMA_SxCR_MBURST_0)
+#define DMA_MBURST_INC8 ((uint32_t)DMA_SxCR_MBURST_1)
+#define DMA_MBURST_INC16 ((uint32_t)DMA_SxCR_MBURST)
+
+#define IS_DMA_MEMORY_BURST(BURST) (((BURST) == DMA_MBURST_SINGLE) || \
+ ((BURST) == DMA_MBURST_INC4) || \
+ ((BURST) == DMA_MBURST_INC8) || \
+ ((BURST) == DMA_MBURST_INC16))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_burst
+ * @{
+ */
+#define DMA_PBURST_SINGLE ((uint32_t)0x00000000)
+#define DMA_PBURST_INC4 ((uint32_t)DMA_SxCR_PBURST_0)
+#define DMA_PBURST_INC8 ((uint32_t)DMA_SxCR_PBURST_1)
+#define DMA_PBURST_INC16 ((uint32_t)DMA_SxCR_PBURST)
+
+#define IS_DMA_PERIPHERAL_BURST(BURST) (((BURST) == DMA_PBURST_SINGLE) || \
+ ((BURST) == DMA_PBURST_INC4) || \
+ ((BURST) == DMA_PBURST_INC8) || \
+ ((BURST) == DMA_PBURST_INC16))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_interrupt_enable_definitions
+ * @{
+ */
+#define DMA_IT_TC ((uint32_t)DMA_SxCR_TCIE)
+#define DMA_IT_HT ((uint32_t)DMA_SxCR_HTIE)
+#define DMA_IT_TE ((uint32_t)DMA_SxCR_TEIE)
+#define DMA_IT_DME ((uint32_t)DMA_SxCR_DMEIE)
+#define DMA_IT_FE ((uint32_t)0x00000080)
+/**
+ * @}
+ */
+
+/** @defgroup DMA_flag_definitions
+ * @{
+ */
+#define DMA_FLAG_FEIF0_4 ((uint32_t)0x00800001)
+#define DMA_FLAG_DMEIF0_4 ((uint32_t)0x00800004)
+#define DMA_FLAG_TEIF0_4 ((uint32_t)0x00000008)
+#define DMA_FLAG_HTIF0_4 ((uint32_t)0x00000010)
+#define DMA_FLAG_TCIF0_4 ((uint32_t)0x00000020)
+#define DMA_FLAG_FEIF1_5 ((uint32_t)0x00000040)
+#define DMA_FLAG_DMEIF1_5 ((uint32_t)0x00000100)
+#define DMA_FLAG_TEIF1_5 ((uint32_t)0x00000200)
+#define DMA_FLAG_HTIF1_5 ((uint32_t)0x00000400)
+#define DMA_FLAG_TCIF1_5 ((uint32_t)0x00000800)
+#define DMA_FLAG_FEIF2_6 ((uint32_t)0x00010000)
+#define DMA_FLAG_DMEIF2_6 ((uint32_t)0x00040000)
+#define DMA_FLAG_TEIF2_6 ((uint32_t)0x00080000)
+#define DMA_FLAG_HTIF2_6 ((uint32_t)0x00100000)
+#define DMA_FLAG_TCIF2_6 ((uint32_t)0x00200000)
+#define DMA_FLAG_FEIF3_7 ((uint32_t)0x00400000)
+#define DMA_FLAG_DMEIF3_7 ((uint32_t)0x01000000)
+#define DMA_FLAG_TEIF3_7 ((uint32_t)0x02000000)
+#define DMA_FLAG_HTIF3_7 ((uint32_t)0x04000000)
+#define DMA_FLAG_TCIF3_7 ((uint32_t)0x08000000)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset DMA handle state
+ * @param __HANDLE__: specifies the DMA handle.
+ * @retval None
+ */
+#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
+
+/**
+ * @brief Return the current DMA Stream FIFO filled level.
+ * @param __HANDLE__: DMA handle
+ * @retval The FIFO filling state.
+ * - DMA_FIFOStatus_Less1QuarterFull: when FIFO is less than 1 quarter-full
+ * and not empty.
+ * - DMA_FIFOStatus_1QuarterFull: if more than 1 quarter-full.
+ * - DMA_FIFOStatus_HalfFull: if more than 1 half-full.
+ * - DMA_FIFOStatus_3QuartersFull: if more than 3 quarters-full.
+ * - DMA_FIFOStatus_Empty: when FIFO is empty
+ * - DMA_FIFOStatus_Full: when FIFO is full
+ */
+#define __HAL_DMA_GET_FS(__HANDLE__) (((__HANDLE__)->Instance->FCR & (DMA_SxFCR_FS)))
+
+/**
+ * @brief Enable the specified DMA Stream.
+ * @param __HANDLE__: DMA handle
+ * @retval None
+ */
+#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA_SxCR_EN)
+
+/**
+ * @brief Disable the specified DMA Stream.
+ * @param __HANDLE__: DMA handle
+ * @retval None
+ */
+#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~DMA_SxCR_EN)
+
+/* Interrupt & Flag management */
+
+/**
+ * @brief Return the current DMA Stream transfer complete flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified transfer complete flag index.
+ */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TCIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TCIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TCIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TCIF2_6 :\
+ DMA_FLAG_TCIF3_7)
+
+/**
+ * @brief Return the current DMA Stream half transfer complete flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified half transfer complete flag index.
+ */
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_HTIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_HTIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_HTIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_HTIF2_6 :\
+ DMA_FLAG_HTIF3_7)
+
+/**
+ * @brief Return the current DMA Stream transfer error flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TEIF2_6 :\
+ DMA_FLAG_TEIF3_7)
+
+/**
+ * @brief Return the current DMA Stream FIFO error flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified FIFO error flag index.
+ */
+#define __HAL_DMA_GET_FE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_FEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_FEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_FEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_FEIF2_6 :\
+ DMA_FLAG_FEIF3_7)
+
+/**
+ * @brief Return the current DMA Stream direct mode error flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified direct mode error flag index.
+ */
+#define __HAL_DMA_GET_DME_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_DMEIF0_4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_DMEIF1_5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_DMEIF2_6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_DMEIF2_6 :\
+ DMA_FLAG_DMEIF3_7)
+
+/**
+ * @brief Get the DMA Stream pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCIFx: Transfer complete flag.
+ * @arg DMA_FLAG_HTIFx: Half transfer complete flag.
+ * @arg DMA_FLAG_TEIFx: Transfer error flag.
+ * @arg DMA_FLAG_DMEIFx: Direct mode error flag.
+ * @arg DMA_FLAG_FEIFx: FIFO error flag.
+ * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HISR & (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LISR & (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HISR & (__FLAG__)) : (DMA1->LISR & (__FLAG__)))
+
+/**
+ * @brief Clear the DMA Stream pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCIFx: Transfer complete flag.
+ * @arg DMA_FLAG_HTIFx: Half transfer complete flag.
+ * @arg DMA_FLAG_TEIFx: Transfer error flag.
+ * @arg DMA_FLAG_DMEIFx: Direct mode error flag.
+ * @arg DMA_FLAG_FEIFx: FIFO error flag.
+ * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag.
+ * @retval None
+ */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HIFCR = (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LIFCR = (__FLAG__)) :\
+ ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HIFCR = (__FLAG__)) : (DMA1->LIFCR = (__FLAG__)))
+
+/**
+ * @brief Enable the specified DMA Stream interrupts.
+ * @param __HANDLE__: DMA handle
+ * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask.
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask.
+ * @arg DMA_IT_TE: Transfer error interrupt mask.
+ * @arg DMA_IT_FE: FIFO error interrupt mask.
+ * @arg DMA_IT_DME: Direct mode error interrupt.
+ * @retval None
+ */
+#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
+((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR |= (__INTERRUPT__)))
+
+/**
+ * @brief Disable the specified DMA Stream interrupts.
+ * @param __HANDLE__: DMA handle
+ * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask.
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask.
+ * @arg DMA_IT_TE: Transfer error interrupt mask.
+ * @arg DMA_IT_FE: FIFO error interrupt mask.
+ * @arg DMA_IT_DME: Direct mode error interrupt.
+ * @retval None
+ */
+#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
+((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR &= ~(__INTERRUPT__)))
+
+/**
+ * @brief Check whether the specified DMA Stream interrupt has occurred or not.
+ * @param __HANDLE__: DMA handle
+ * @param __INTERRUPT__: specifies the DMA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask.
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask.
+ * @arg DMA_IT_TE: Transfer error interrupt mask.
+ * @arg DMA_IT_FE: FIFO error interrupt mask.
+ * @arg DMA_IT_DME: Direct mode error interrupt.
+ * @retval The state of DMA_IT.
+ */
+#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \
+ ((__HANDLE__)->Instance->CR & (__INTERRUPT__)) : \
+ ((__HANDLE__)->Instance->FCR & (__INTERRUPT__)))
+
+/**
+ * @brief Writes the number of data units to be transferred on the DMA Stream.
+ * @param __HANDLE__: DMA handle
+ * @param __COUNTER__: Number of data units to be transferred (from 0 to 65535)
+ * Number of data items depends only on the Peripheral data format.
+ *
+ * @note If Peripheral data format is Bytes: number of data units is equal
+ * to total number of bytes to be transferred.
+ *
+ * @note If Peripheral data format is Half-Word: number of data units is
+ * equal to total number of bytes to be transferred / 2.
+ *
+ * @note If Peripheral data format is Word: number of data units is equal
+ * to total number of bytes to be transferred / 4.
+ *
+ * @retval The number of remaining data units in the current DMAy Streamx transfer.
+ */
+#define __HAL_DMA_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->NDTR = (uint16_t)(__COUNTER__))
+
+/**
+ * @brief Returns the number of remaining data units in the current DMAy Streamx transfer.
+ * @param __HANDLE__: DMA handle
+ *
+ * @retval The number of remaining data units in the current DMA Stream transfer.
+ */
+#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->NDTR)
+
+
+/* Include DMA HAL Extension module */
+#include "stm32f4xx_hal_dma_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma);
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout);
+void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
+
+/* Peripheral State and Error functions ***************************************/
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
+uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_dma2d.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,504 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dma2d.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of DMA2D HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DMA2D_H
+#define __STM32F4xx_HAL_DMA2D_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMA2D
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+#define MAX_DMA2D_LAYER 2
+
+/**
+ * @brief DMA2D color Structure definition
+ */
+typedef struct
+{
+ uint32_t Blue; /*!< Configures the blue value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint32_t Green; /*!< Configures the green value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint32_t Red; /*!< Configures the red value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+} DMA2D_ColorTypeDef;
+
+/**
+ * @brief DMA2D CLUT Structure definition
+ */
+typedef struct
+{
+ uint32_t *pCLUT; /*!< Configures the DMA2D CLUT memory address.*/
+
+ uint32_t CLUTColorMode; /*!< configures the DMA2D CLUT color mode.
+ This parameter can be one value of @ref DMA2D_CLUT_CM */
+
+ uint32_t Size; /*!< configures the DMA2D CLUT size.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.*/
+} DMA2D_CLUTCfgTypeDef;
+
+/**
+ * @brief DMA2D Init structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< configures the DMA2D transfer mode.
+ This parameter can be one value of @ref DMA2D_Mode */
+
+ uint32_t ColorMode; /*!< configures the color format of the output image.
+ This parameter can be one value of @ref DMA2D_Color_Mode */
+
+ uint32_t OutputOffset; /*!< Specifies the Offset value.
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */
+} DMA2D_InitTypeDef;
+
+/**
+ * @brief DMA2D Layer structure definition
+ */
+typedef struct
+{
+ uint32_t InputOffset; /*!< configures the DMA2D foreground offset.
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */
+
+ uint32_t InputColorMode; /*!< configures the DMA2D foreground color mode .
+ This parameter can be one value of @ref DMA2D_Input_Color_Mode */
+
+ uint32_t AlphaMode; /*!< configures the DMA2D foreground alpha mode.
+ This parameter can be one value of @ref DMA2D_ALPHA_MODE */
+
+ uint32_t InputAlpha; /*!< Specifies the DMA2D foreground alpha value and color value in case of A8 or A4 color mode.
+ This parameter must be a number between Min_Data = 0x00000000 and Max_Data = 0xFFFFFFFF
+ in case of A8 or A4 color mode (ARGB).
+ Otherwise, This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.*/
+
+} DMA2D_LayerCfgTypeDef;
+
+/**
+ * @brief HAL DMA2D State structures definition
+ */
+typedef enum
+{
+ HAL_DMA2D_STATE_RESET = 0x00, /*!< DMA2D not yet initialized or disabled */
+ HAL_DMA2D_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_DMA2D_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_DMA2D_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_DMA2D_STATE_ERROR = 0x04, /*!< DMA2D state error */
+ HAL_DMA2D_STATE_SUSPEND = 0x05 /*!< DMA2D process is suspended */
+}HAL_DMA2D_StateTypeDef;
+
+/**
+ * @brief DMA2D handle Structure definition
+ */
+typedef struct __DMA2D_HandleTypeDef
+{
+ DMA2D_TypeDef *Instance; /*!< DMA2D Register base address */
+
+ DMA2D_InitTypeDef Init; /*!< DMA2D communication parameters */
+
+ void (* XferCpltCallback)(struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D transfer complete callback */
+
+ void (* XferErrorCallback)(struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D transfer error callback */
+
+ DMA2D_LayerCfgTypeDef LayerCfg[MAX_DMA2D_LAYER]; /*!< DMA2D Layers parameters */
+
+ HAL_LockTypeDef Lock; /*!< DMA2D Lock */
+
+ __IO HAL_DMA2D_StateTypeDef State; /*!< DMA2D transfer state */
+
+ __IO uint32_t ErrorCode; /*!< DMA2D Error code */
+} DMA2D_HandleTypeDef;
+
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DMA2D_Exported_Constants
+ * @{
+ */
+
+/** @defgroup DMA2D_Layer
+ * @{
+ */
+#define IS_DMA2D_LAYER(LAYER) ((LAYER) <= MAX_DMA2D_LAYER)
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Error_Code
+ * @{
+ */
+#define HAL_DMA2D_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_DMA2D_ERROR_TE ((uint32_t)0x00000001) /*!< Transfer error */
+#define HAL_DMA2D_ERROR_CE ((uint32_t)0x00000002) /*!< Configuration error */
+#define HAL_DMA2D_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Mode
+ * @{
+ */
+#define DMA2D_M2M ((uint32_t)0x00000000) /*!< DMA2D memory to memory transfer mode */
+#define DMA2D_M2M_PFC ((uint32_t)0x00010000) /*!< DMA2D memory to memory with pixel format conversion transfer mode */
+#define DMA2D_M2M_BLEND ((uint32_t)0x00020000) /*!< DMA2D memory to memory with blending transfer mode */
+#define DMA2D_R2M ((uint32_t)0x00030000) /*!< DMA2D register to memory transfer mode */
+
+#define IS_DMA2D_MODE(MODE) (((MODE) == DMA2D_M2M) || ((MODE) == DMA2D_M2M_PFC) || \
+ ((MODE) == DMA2D_M2M_BLEND) || ((MODE) == DMA2D_R2M))
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Color_Mode
+ * @{
+ */
+#define DMA2D_ARGB8888 ((uint32_t)0x00000000) /*!< ARGB8888 DMA2D color mode */
+#define DMA2D_RGB888 ((uint32_t)0x00000001) /*!< RGB888 DMA2D color mode */
+#define DMA2D_RGB565 ((uint32_t)0x00000002) /*!< RGB565 DMA2D color mode */
+#define DMA2D_ARGB1555 ((uint32_t)0x00000003) /*!< ARGB1555 DMA2D color mode */
+#define DMA2D_ARGB4444 ((uint32_t)0x00000004) /*!< ARGB4444 DMA2D color mode */
+
+#define IS_DMA2D_CMODE(MODE_ARGB) (((MODE_ARGB) == DMA2D_ARGB8888) || ((MODE_ARGB) == DMA2D_RGB888) || \
+ ((MODE_ARGB) == DMA2D_RGB565) || ((MODE_ARGB) == DMA2D_ARGB1555) || \
+ ((MODE_ARGB) == DMA2D_ARGB4444))
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_COLOR_VALUE
+ * @{
+ */
+
+#define COLOR_VALUE ((uint32_t)0x000000FF) /*!< color value mask */
+
+#define IS_DMA2D_COLOR(COLOR) ((COLOR) <= COLOR_VALUE)
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_SIZE
+ * @{
+ */
+#define DMA2D_PIXEL (DMA2D_NLR_PL >> 16) /*!< DMA2D pixel per line */
+#define DMA2D_LINE DMA2D_NLR_NL /*!< DMA2D number of line */
+
+#define IS_DMA2D_LINE(LINE) ((LINE) <= DMA2D_LINE)
+#define IS_DMA2D_PIXEL(PIXEL) ((PIXEL) <= DMA2D_PIXEL)
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Offset
+ * @{
+ */
+#define DMA2D_OFFSET DMA2D_FGOR_LO /*!< Line Offset */
+
+#define IS_DMA2D_OFFSET(OOFFSET) ((OOFFSET) <= DMA2D_OFFSET)
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Input_Color_Mode
+ * @{
+ */
+#define CM_ARGB8888 ((uint32_t)0x00000000) /*!< ARGB8888 color mode */
+#define CM_RGB888 ((uint32_t)0x00000001) /*!< RGB888 color mode */
+#define CM_RGB565 ((uint32_t)0x00000002) /*!< RGB565 color mode */
+#define CM_ARGB1555 ((uint32_t)0x00000003) /*!< ARGB1555 color mode */
+#define CM_ARGB4444 ((uint32_t)0x00000004) /*!< ARGB4444 color mode */
+#define CM_L8 ((uint32_t)0x00000005) /*!< L8 color mode */
+#define CM_AL44 ((uint32_t)0x00000006) /*!< AL44 color mode */
+#define CM_AL88 ((uint32_t)0x00000007) /*!< AL88 color mode */
+#define CM_L4 ((uint32_t)0x00000008) /*!< L4 color mode */
+#define CM_A8 ((uint32_t)0x00000009) /*!< A8 color mode */
+#define CM_A4 ((uint32_t)0x0000000A) /*!< A4 color mode */
+
+#define IS_DMA2D_INPUT_COLOR_MODE(INPUT_CM) (((INPUT_CM) == CM_ARGB8888) || ((INPUT_CM) == CM_RGB888) || \
+ ((INPUT_CM) == CM_RGB565) || ((INPUT_CM) == CM_ARGB1555) || \
+ ((INPUT_CM) == CM_ARGB4444) || ((INPUT_CM) == CM_L8) || \
+ ((INPUT_CM) == CM_AL44) || ((INPUT_CM) == CM_AL88) || \
+ ((INPUT_CM) == CM_L4) || ((INPUT_CM) == CM_A8) || \
+ ((INPUT_CM) == CM_A4))
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_ALPHA_MODE
+ * @{
+ */
+#define DMA2D_NO_MODIF_ALPHA ((uint32_t)0x00000000) /*!< No modification of the alpha channel value */
+#define DMA2D_REPLACE_ALPHA ((uint32_t)0x00000001) /*!< Replace original alpha channel value by programmed alpha value */
+#define DMA2D_COMBINE_ALPHA ((uint32_t)0x00000002) /*!< Replace original alpha channel value by programmed alpha value
+ with original alpha channel value */
+
+#define IS_DMA2D_ALPHA_MODE(AlphaMode) (((AlphaMode) == DMA2D_NO_MODIF_ALPHA) || \
+ ((AlphaMode) == DMA2D_REPLACE_ALPHA) || \
+ ((AlphaMode) == DMA2D_COMBINE_ALPHA))
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_CLUT_CM
+ * @{
+ */
+#define DMA2D_CCM_ARGB8888 ((uint32_t)0x00000000) /*!< ARGB8888 DMA2D C-LUT color mode */
+#define DMA2D_CCM_RGB888 ((uint32_t)0x00000001) /*!< RGB888 DMA2D C-LUT color mode */
+
+#define IS_DMA2D_CLUT_CM(CLUT_CM) (((CLUT_CM) == DMA2D_CCM_ARGB8888) || ((CLUT_CM) == DMA2D_CCM_RGB888))
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Size_Clut
+ * @{
+ */
+#define DMA2D_CLUT_SIZE (DMA2D_FGPFCCR_CS >> 8) /*!< DMA2D C-LUT size */
+
+#define IS_DMA2D_CLUT_SIZE(CLUT_SIZE) ((CLUT_SIZE) <= DMA2D_CLUT_SIZE)
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_DeadTime
+ * @{
+ */
+#define LINE_WATERMARK DMA2D_LWR_LW
+
+#define IS_DMA2D_LineWatermark(LineWatermark) ((LineWatermark) <= LINE_WATERMARK)
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Interrupts
+ * @{
+ */
+#define DMA2D_IT_CE DMA2D_CR_CEIE /*!< Configuration Error Interrupt */
+#define DMA2D_IT_CTC DMA2D_CR_CTCIE /*!< C-LUT Transfer Complete Interrupt */
+#define DMA2D_IT_CAE DMA2D_CR_CAEIE /*!< C-LUT Access Error Interrupt */
+#define DMA2D_IT_TW DMA2D_CR_TWIE /*!< Transfer Watermark Interrupt */
+#define DMA2D_IT_TC DMA2D_CR_TCIE /*!< Transfer Complete Interrupt */
+#define DMA2D_IT_TE DMA2D_CR_TEIE /*!< Transfer Error Interrupt */
+
+#define IS_DMA2D_IT(IT) (((IT) == DMA2D_IT_CTC) || ((IT) == DMA2D_IT_CAE) || \
+ ((IT) == DMA2D_IT_TW) || ((IT) == DMA2D_IT_TC) || \
+ ((IT) == DMA2D_IT_TE) || ((IT) == DMA2D_IT_CE))
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Flag
+ * @{
+ */
+#define DMA2D_FLAG_CE DMA2D_ISR_CEIF /*!< Configuration Error Interrupt Flag */
+#define DMA2D_FLAG_CTC DMA2D_ISR_CTCIF /*!< C-LUT Transfer Complete Interrupt Flag */
+#define DMA2D_FLAG_CAE DMA2D_ISR_CAEIF /*!< C-LUT Access Error Interrupt Flag */
+#define DMA2D_FLAG_TW DMA2D_ISR_TWIF /*!< Transfer Watermark Interrupt Flag */
+#define DMA2D_FLAG_TC DMA2D_ISR_TCIF /*!< Transfer Complete Interrupt Flag */
+#define DMA2D_FLAG_TE DMA2D_ISR_TEIF /*!< Transfer Error Interrupt Flag */
+
+#define IS_DMA2D_GET_FLAG(FLAG) (((FLAG) == DMA2D_FLAG_CTC) || ((FLAG) == DMA2D_FLAG_CAE) || \
+ ((FLAG) == DMA2D_FLAG_TW) || ((FLAG) == DMA2D_FLAG_TC) || \
+ ((FLAG) == DMA2D_FLAG_TE) || ((FLAG) == DMA2D_FLAG_CE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset DMA2D handle state
+ * @param __HANDLE__: specifies the DMA2D handle.
+ * @retval None
+ */
+#define __HAL_DMA2D_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA2D_STATE_RESET)
+
+/**
+ * @brief Enable the DMA2D.
+ * @param __HANDLE__: DMA2D handle
+ * @retval None.
+ */
+#define __HAL_DMA2D_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA2D_CR_START)
+
+/**
+ * @brief Disable the DMA2D.
+ * @param __HANDLE__: DMA2D handle
+ * @retval None.
+ */
+#define __HAL_DMA2D_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~DMA2D_CR_START)
+
+/* Interrupt & Flag management */
+/**
+ * @brief Get the DMA2D pending flags.
+ * @param __HANDLE__: DMA2D handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DMA2D_FLAG_CE: Configuration error flag
+ * @arg DMA2D_FLAG_CTC: C-LUT transfer complete flag
+ * @arg DMA2D_FLAG_CAE: C-LUT access error flag
+ * @arg DMA2D_FLAG_TW: Transfer Watermark flag
+ * @arg DMA2D_FLAG_TC: Transfer complete flag
+ * @arg DMA2D_FLAG_TE: Transfer error flag
+ * @retval The state of FLAG.
+ */
+#define __HAL_DMA2D_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
+
+/**
+ * @brief Clears the DMA2D pending flags.
+ * @param __HANDLE__: DMA2D handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA2D_FLAG_CE: Configuration error flag
+ * @arg DMA2D_FLAG_CTC: C-LUT transfer complete flag
+ * @arg DMA2D_FLAG_CAE: C-LUT access error flag
+ * @arg DMA2D_FLAG_TW: Transfer Watermark flag
+ * @arg DMA2D_FLAG_TC: Transfer complete flag
+ * @arg DMA2D_FLAG_TE: Transfer error flag
+ * @retval None
+ */
+#define __HAL_DMA2D_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->IFCR = (__FLAG__))
+
+/**
+ * @brief Enables the specified DMA2D interrupts.
+ * @param __HANDLE__: DMA2D handle
+ * @param __INTERRUPT__: specifies the DMA2D interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA2D_IT_CE: Configuration error interrupt mask
+ * @arg DMA2D_IT_CTC: C-LUT transfer complete interrupt mask
+ * @arg DMA2D_IT_CAE: C-LUT access error interrupt mask
+ * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask
+ * @arg DMA2D_IT_TC: Transfer complete interrupt mask
+ * @arg DMA2D_IT_TE: Transfer error interrupt mask
+ * @retval None
+ */
+#define __HAL_DMA2D_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified DMA2D interrupts.
+ * @param __HANDLE__: DMA2D handle
+ * @param __INTERRUPT__: specifies the DMA2D interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA2D_IT_CE: Configuration error interrupt mask
+ * @arg DMA2D_IT_CTC: C-LUT transfer complete interrupt mask
+ * @arg DMA2D_IT_CAE: C-LUT access error interrupt mask
+ * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask
+ * @arg DMA2D_IT_TC: Transfer complete interrupt mask
+ * @arg DMA2D_IT_TE: Transfer error interrupt mask
+ * @retval None
+ */
+#define __HAL_DMA2D_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Checks whether the specified DMA2D interrupt has occurred or not.
+ * @param __HANDLE__: DMA2D handle
+ * @param __INTERRUPT__: specifies the DMA2D interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DMA2D_IT_CE: Configuration error interrupt mask
+ * @arg DMA2D_IT_CTC: C-LUT transfer complete interrupt mask
+ * @arg DMA2D_IT_CAE: C-LUT access error interrupt mask
+ * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask
+ * @arg DMA2D_IT_TC: Transfer complete interrupt mask
+ * @arg DMA2D_IT_TE: Transfer error interrupt mask
+ * @retval The state of INTERRUPT.
+ */
+#define __HAL_DMA2D_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR & (__INTERRUPT__))
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions *******************************/
+HAL_StatusTypeDef HAL_DMA2D_Init(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_DeInit (DMA2D_HandleTypeDef *hdma2d);
+void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef* hdma2d);
+void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef* hdma2d);
+
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_DMA2D_Start(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Heigh);
+HAL_StatusTypeDef HAL_DMA2D_BlendingStart(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Heigh);
+HAL_StatusTypeDef HAL_DMA2D_Start_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Heigh);
+HAL_StatusTypeDef HAL_DMA2D_BlendingStart_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Heigh);
+HAL_StatusTypeDef HAL_DMA2D_Suspend(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_Resume(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_Abort(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_PollForTransfer(DMA2D_HandleTypeDef *hdma2d, uint32_t Timeout);
+void HAL_DMA2D_IRQHandler(DMA2D_HandleTypeDef *hdma2d);
+
+/* Peripheral Control functions *************************************************/
+HAL_StatusTypeDef HAL_DMA2D_ConfigLayer(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_ConfigCLUT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_EnableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_DisableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_ProgramLineEvent(DMA2D_HandleTypeDef *hdma2d, uint32_t Line);
+
+/* Peripheral State functions ***************************************************/
+HAL_DMA2D_StateTypeDef HAL_DMA2D_GetState(DMA2D_HandleTypeDef *hdma2d);
+uint32_t HAL_DMA2D_GetError(DMA2D_HandleTypeDef *hdma2d);
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_DMA2D_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_dma_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,92 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dma_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of DMA HAL extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DMA_EX_H
+#define __STM32F4xx_HAL_DMA_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMAEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL DMA Memory definition
+ */
+typedef enum
+{
+ MEMORY0 = 0x00, /*!< Memory 0 */
+ MEMORY1 = 0x01, /*!< Memory 1 */
+
+}HAL_DMA_MemoryTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_eth.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,2239 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_eth.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of ETH HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_ETH_H
+#define __STM32F4xx_HAL_ETH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup ETH
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_ETH_STATE_RESET = 0x00, /*!< Peripheral not yet Initialized or disabled */
+ HAL_ETH_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_ETH_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_ETH_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_ETH_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_ETH_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_ETH_STATE_BUSY_WR = 0x42, /*!< Write process is ongoing */
+ HAL_ETH_STATE_BUSY_RD = 0x82, /*!< Read process is ongoing */
+ HAL_ETH_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_ETH_STATE_ERROR = 0x04 /*!< Reception process is ongoing */
+}HAL_ETH_StateTypeDef;
+
+/**
+ * @brief ETH Init Structure definition
+ */
+
+typedef struct
+{
+ uint32_t AutoNegotiation; /*!< Selects or not the AutoNegotiation mode for the external PHY
+ The AutoNegotiation allows an automatic setting of the Speed (10/100Mbps)
+ and the mode (half/full-duplex).
+ This parameter can be a value of @ref ETH_AutoNegotiation */
+
+ uint32_t Speed; /*!< Sets the Ethernet speed: 10/100 Mbps.
+ This parameter can be a value of @ref ETH_Speed */
+
+ uint32_t DuplexMode; /*!< Selects the MAC duplex mode: Half-Duplex or Full-Duplex mode
+ This parameter can be a value of @ref ETH_Duplex_Mode */
+
+ uint16_t PhyAddress; /*!< Ethernet PHY address.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 32 */
+
+ uint8_t *MACAddr; /*!< MAC Address of used Hardware: must be pointer on an array of 6 bytes */
+
+ uint32_t RxMode; /*!< Selects the Ethernet Rx mode: Polling mode, Interrupt mode.
+ This parameter can be a value of @ref ETH_Rx_Mode */
+
+ uint32_t ChecksumMode; /*!< Selects if the checksum is check by hardware or by software.
+ This parameter can be a value of @ref ETH_Checksum_Mode */
+
+ uint32_t MediaInterface ; /*!< Selects the media-independent interface or the reduced media-independent interface.
+ This parameter can be a value of @ref ETH_Media_Interface */
+
+} ETH_InitTypeDef;
+
+
+ /**
+ * @brief ETH MAC Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t Watchdog; /*!< Selects or not the Watchdog timer
+ When enabled, the MAC allows no more then 2048 bytes to be received.
+ When disabled, the MAC can receive up to 16384 bytes.
+ This parameter can be a value of @ref ETH_watchdog */
+
+ uint32_t Jabber; /*!< Selects or not Jabber timer
+ When enabled, the MAC allows no more then 2048 bytes to be sent.
+ When disabled, the MAC can send up to 16384 bytes.
+ This parameter can be a value of @ref ETH_Jabber */
+
+ uint32_t InterFrameGap; /*!< Selects the minimum IFG between frames during transmission.
+ This parameter can be a value of @ref ETH_Inter_Frame_Gap */
+
+ uint32_t CarrierSense; /*!< Selects or not the Carrier Sense.
+ This parameter can be a value of @ref ETH_Carrier_Sense */
+
+ uint32_t ReceiveOwn; /*!< Selects or not the ReceiveOwn,
+ ReceiveOwn allows the reception of frames when the TX_EN signal is asserted
+ in Half-Duplex mode.
+ This parameter can be a value of @ref ETH_Receive_Own */
+
+ uint32_t LoopbackMode; /*!< Selects or not the internal MAC MII Loopback mode.
+ This parameter can be a value of @ref ETH_Loop_Back_Mode */
+
+ uint32_t ChecksumOffload; /*!< Selects or not the IPv4 checksum checking for received frame payloads' TCP/UDP/ICMP headers.
+ This parameter can be a value of @ref ETH_Checksum_Offload */
+
+ uint32_t RetryTransmission; /*!< Selects or not the MAC attempt retries transmission, based on the settings of BL,
+ when a collision occurs (Half-Duplex mode).
+ This parameter can be a value of @ref ETH_Retry_Transmission */
+
+ uint32_t AutomaticPadCRCStrip; /*!< Selects or not the Automatic MAC Pad/CRC Stripping.
+ This parameter can be a value of @ref ETH_Automatic_Pad_CRC_Strip */
+
+ uint32_t BackOffLimit; /*!< Selects the BackOff limit value.
+ This parameter can be a value of @ref ETH_Back_Off_Limit */
+
+ uint32_t DeferralCheck; /*!< Selects or not the deferral check function (Half-Duplex mode).
+ This parameter can be a value of @ref ETH_Deferral_Check */
+
+ uint32_t ReceiveAll; /*!< Selects or not all frames reception by the MAC (No filtering).
+ This parameter can be a value of @ref ETH_Receive_All */
+
+ uint32_t SourceAddrFilter; /*!< Selects the Source Address Filter mode.
+ This parameter can be a value of @ref ETH_Source_Addr_Filter */
+
+ uint32_t PassControlFrames; /*!< Sets the forwarding mode of the control frames (including unicast and multicast PAUSE frames)
+ This parameter can be a value of @ref ETH_Pass_Control_Frames */
+
+ uint32_t BroadcastFramesReception; /*!< Selects or not the reception of Broadcast Frames.
+ This parameter can be a value of @ref ETH_Broadcast_Frames_Reception */
+
+ uint32_t DestinationAddrFilter; /*!< Sets the destination filter mode for both unicast and multicast frames.
+ This parameter can be a value of @ref ETH_Destination_Addr_Filter */
+
+ uint32_t PromiscuousMode; /*!< Selects or not the Promiscuous Mode
+ This parameter can be a value of @ref ETH_Promiscuous_Mode */
+
+ uint32_t MulticastFramesFilter; /*!< Selects the Multicast Frames filter mode: None/HashTableFilter/PerfectFilter/PerfectHashTableFilter.
+ This parameter can be a value of @ref ETH_Multicast_Frames_Filter */
+
+ uint32_t UnicastFramesFilter; /*!< Selects the Unicast Frames filter mode: HashTableFilter/PerfectFilter/PerfectHashTableFilter.
+ This parameter can be a value of @ref ETH_Unicast_Frames_Filter */
+
+ uint32_t HashTableHigh; /*!< This field holds the higher 32 bits of Hash table.
+ This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFFFFFF */
+
+ uint32_t HashTableLow; /*!< This field holds the lower 32 bits of Hash table.
+ This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFFFFFF */
+
+ uint32_t PauseTime; /*!< This field holds the value to be used in the Pause Time field in the transmit control frame.
+ This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFF */
+
+ uint32_t ZeroQuantaPause; /*!< Selects or not the automatic generation of Zero-Quanta Pause Control frames.
+ This parameter can be a value of @ref ETH_Zero_Quanta_Pause */
+
+ uint32_t PauseLowThreshold; /*!< This field configures the threshold of the PAUSE to be checked for
+ automatic retransmission of PAUSE Frame.
+ This parameter can be a value of @ref ETH_Pause_Low_Threshold */
+
+ uint32_t UnicastPauseFrameDetect; /*!< Selects or not the MAC detection of the Pause frames (with MAC Address0
+ unicast address and unique multicast address).
+ This parameter can be a value of @ref ETH_Unicast_Pause_Frame_Detect */
+
+ uint32_t ReceiveFlowControl; /*!< Enables or disables the MAC to decode the received Pause frame and
+ disable its transmitter for a specified time (Pause Time)
+ This parameter can be a value of @ref ETH_Receive_Flow_Control */
+
+ uint32_t TransmitFlowControl; /*!< Enables or disables the MAC to transmit Pause frames (Full-Duplex mode)
+ or the MAC back-pressure operation (Half-Duplex mode)
+ This parameter can be a value of @ref ETH_Transmit_Flow_Control */
+
+ uint32_t VLANTagComparison; /*!< Selects the 12-bit VLAN identifier or the complete 16-bit VLAN tag for
+ comparison and filtering.
+ This parameter can be a value of @ref ETH_VLAN_Tag_Comparison */
+
+ uint32_t VLANTagIdentifier; /*!< Holds the VLAN tag identifier for receive frames */
+
+} ETH_MACInitTypeDef;
+
+
+/**
+ * @brief ETH DMA Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t DropTCPIPChecksumErrorFrame; /*!< Selects or not the Dropping of TCP/IP Checksum Error Frames.
+ This parameter can be a value of @ref ETH_Drop_TCP_IP_Checksum_Error_Frame */
+
+ uint32_t ReceiveStoreForward; /*!< Enables or disables the Receive store and forward mode.
+ This parameter can be a value of @ref ETH_Receive_Store_Forward */
+
+ uint32_t FlushReceivedFrame; /*!< Enables or disables the flushing of received frames.
+ This parameter can be a value of @ref ETH_Flush_Received_Frame */
+
+ uint32_t TransmitStoreForward; /*!< Enables or disables Transmit store and forward mode.
+ This parameter can be a value of @ref ETH_Transmit_Store_Forward */
+
+ uint32_t TransmitThresholdControl; /*!< Selects or not the Transmit Threshold Control.
+ This parameter can be a value of @ref ETH_Transmit_Threshold_Control */
+
+ uint32_t ForwardErrorFrames; /*!< Selects or not the forward to the DMA of erroneous frames.
+ This parameter can be a value of @ref ETH_Forward_Error_Frames */
+
+ uint32_t ForwardUndersizedGoodFrames; /*!< Enables or disables the Rx FIFO to forward Undersized frames (frames with no Error
+ and length less than 64 bytes) including pad-bytes and CRC)
+ This parameter can be a value of @ref ETH_Forward_Undersized_Good_Frames */
+
+ uint32_t ReceiveThresholdControl; /*!< Selects the threshold level of the Receive FIFO.
+ This parameter can be a value of @ref ETH_Receive_Threshold_Control */
+
+ uint32_t SecondFrameOperate; /*!< Selects or not the Operate on second frame mode, which allows the DMA to process a second
+ frame of Transmit data even before obtaining the status for the first frame.
+ This parameter can be a value of @ref ETH_Second_Frame_Operate */
+
+ uint32_t AddressAlignedBeats; /*!< Enables or disables the Address Aligned Beats.
+ This parameter can be a value of @ref ETH_Address_Aligned_Beats */
+
+ uint32_t FixedBurst; /*!< Enables or disables the AHB Master interface fixed burst transfers.
+ This parameter can be a value of @ref ETH_Fixed_Burst */
+
+ uint32_t RxDMABurstLength; /*!< Indicates the maximum number of beats to be transferred in one Rx DMA transaction.
+ This parameter can be a value of @ref ETH_Rx_DMA_Burst_Length */
+
+ uint32_t TxDMABurstLength; /*!< Indicates the maximum number of beats to be transferred in one Tx DMA transaction.
+ This parameter can be a value of @ref ETH_Tx_DMA_Burst_Length */
+
+ uint32_t EnhancedDescriptorFormat; /*!< Enables the enhanced descriptor format.
+ This parameter can be a value of @ref ETH_DMA_Enhanced_descriptor_format */
+
+ uint32_t DescriptorSkipLength; /*!< Specifies the number of word to skip between two unchained descriptors (Ring mode)
+ This parameter must be a number between Min_Data = 0 and Max_Data = 32 */
+
+ uint32_t DMAArbitration; /*!< Selects the DMA Tx/Rx arbitration.
+ This parameter can be a value of @ref ETH_DMA_Arbitration */
+} ETH_DMAInitTypeDef;
+
+
+/**
+ * @brief ETH DMA Descriptors data structure definition
+ */
+
+typedef struct
+{
+ __IO uint32_t Status; /*!< Status */
+
+ uint32_t ControlBufferSize; /*!< Control and Buffer1, Buffer2 lengths */
+
+ uint32_t Buffer1Addr; /*!< Buffer1 address pointer */
+
+ uint32_t Buffer2NextDescAddr; /*!< Buffer2 or next descriptor address pointer */
+
+ /*!< Enhanced ETHERNET DMA PTP Descriptors */
+ uint32_t ExtendedStatus; /*!< Extended status for PTP receive descriptor */
+
+ uint32_t Reserved1; /*!< Reserved */
+
+ uint32_t TimeStampLow; /*!< Time Stamp Low value for transmit and receive */
+
+ uint32_t TimeStampHigh; /*!< Time Stamp High value for transmit and receive */
+
+} ETH_DMADescTypeDef;
+
+
+/**
+ * @brief Received Frame Informations structure definition
+ */
+typedef struct
+{
+ ETH_DMADescTypeDef *FSRxDesc; /*!< First Segment Rx Desc */
+
+ ETH_DMADescTypeDef *LSRxDesc; /*!< Last Segment Rx Desc */
+
+ uint32_t SegCount; /*!< Segment count */
+
+ uint32_t length; /*!< Frame length */
+
+ uint32_t buffer; /*!< Frame buffer */
+
+} ETH_DMARxFrameInfos;
+
+
+/**
+ * @brief ETH Handle Structure definition
+ */
+
+typedef struct
+{
+ ETH_TypeDef *Instance; /*!< Register base address */
+
+ ETH_InitTypeDef Init; /*!< Ethernet Init Configuration */
+
+ uint32_t LinkStatus; /*!< Ethernet link status */
+
+ ETH_DMADescTypeDef *RxDesc; /*!< Rx descriptor to Get */
+
+ ETH_DMADescTypeDef *TxDesc; /*!< Tx descriptor to Set */
+
+ ETH_DMARxFrameInfos RxFrameInfos; /*!< last Rx frame infos */
+
+ __IO HAL_ETH_StateTypeDef State; /*!< ETH communication state */
+
+ HAL_LockTypeDef Lock; /*!< ETH Lock */
+
+} ETH_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+#define IS_ETH_PHY_ADDRESS(ADDRESS) ((ADDRESS) <= 0x20)
+
+/* Delay to wait when writing to some Ethernet registers */
+#define ETH_REG_WRITE_DELAY ((uint32_t)0x00000001)
+
+
+/* ETHERNET Errors */
+#define ETH_SUCCESS ((uint32_t)0)
+#define ETH_ERROR ((uint32_t)1)
+
+/** @defgroup ETH_Buffers_setting
+ * @{
+ */
+#define ETH_MAX_PACKET_SIZE ((uint32_t)1524) /*!< ETH_HEADER + ETH_EXTRA + VLAN_TAG + MAX_ETH_PAYLOAD + ETH_CRC */
+#define ETH_HEADER ((uint32_t)14) /*!< 6 byte Dest addr, 6 byte Src addr, 2 byte length/type */
+#define ETH_CRC ((uint32_t)4) /*!< Ethernet CRC */
+#define ETH_EXTRA ((uint32_t)2) /*!< Extra bytes in some cases */
+#define VLAN_TAG ((uint32_t)4) /*!< optional 802.1q VLAN Tag */
+#define MIN_ETH_PAYLOAD ((uint32_t)46) /*!< Minimum Ethernet payload size */
+#define MAX_ETH_PAYLOAD ((uint32_t)1500) /*!< Maximum Ethernet payload size */
+#define JUMBO_FRAME_PAYLOAD ((uint32_t)9000) /*!< Jumbo frame payload size */
+
+ /* Ethernet driver receive buffers are organized in a chained linked-list, when
+ an ethernet packet is received, the Rx-DMA will transfer the packet from RxFIFO
+ to the driver receive buffers memory.
+
+ Depending on the size of the received ethernet packet and the size of
+ each ethernet driver receive buffer, the received packet can take one or more
+ ethernet driver receive buffer.
+
+ In below are defined the size of one ethernet driver receive buffer ETH_RX_BUF_SIZE
+ and the total count of the driver receive buffers ETH_RXBUFNB.
+
+ The configured value for ETH_RX_BUF_SIZE and ETH_RXBUFNB are only provided as
+ example, they can be reconfigured in the application layer to fit the application
+ needs */
+
+/* Here we configure each Ethernet driver receive buffer to fit the Max size Ethernet
+ packet */
+#ifndef ETH_RX_BUF_SIZE
+ #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE
+#endif
+
+/* 5 Ethernet driver receive buffers are used (in a chained linked list)*/
+#ifndef ETH_RXBUFNB
+ #define ETH_RXBUFNB ((uint32_t)5 /* 5 Rx buffers of size ETH_RX_BUF_SIZE */
+#endif
+
+
+ /* Ethernet driver transmit buffers are organized in a chained linked-list, when
+ an ethernet packet is transmitted, Tx-DMA will transfer the packet from the
+ driver transmit buffers memory to the TxFIFO.
+
+ Depending on the size of the Ethernet packet to be transmitted and the size of
+ each ethernet driver transmit buffer, the packet to be transmitted can take
+ one or more ethernet driver transmit buffer.
+
+ In below are defined the size of one ethernet driver transmit buffer ETH_TX_BUF_SIZE
+ and the total count of the driver transmit buffers ETH_TXBUFNB.
+
+ The configured value for ETH_TX_BUF_SIZE and ETH_TXBUFNB are only provided as
+ example, they can be reconfigured in the application layer to fit the application
+ needs */
+
+/* Here we configure each Ethernet driver transmit buffer to fit the Max size Ethernet
+ packet */
+#ifndef ETH_TX_BUF_SIZE
+ #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE
+#endif
+
+/* 5 ethernet driver transmit buffers are used (in a chained linked list)*/
+#ifndef ETH_TXBUFNB
+ #define ETH_TXBUFNB ((uint32_t)5 /* 5 Tx buffers of size ETH_TX_BUF_SIZE */
+#endif
+
+
+/*
+ DMA Tx Desciptor
+ -----------------------------------------------------------------------------------------------
+ TDES0 | OWN(31) | CTRL[30:26] | Reserved[25:24] | CTRL[23:20] | Reserved[19:17] | Status[16:0] |
+ -----------------------------------------------------------------------------------------------
+ TDES1 | Reserved[31:29] | Buffer2 ByteCount[28:16] | Reserved[15:13] | Buffer1 ByteCount[12:0] |
+ -----------------------------------------------------------------------------------------------
+ TDES2 | Buffer1 Address [31:0] |
+ -----------------------------------------------------------------------------------------------
+ TDES3 | Buffer2 Address [31:0] / Next Descriptor Address [31:0] |
+ -----------------------------------------------------------------------------------------------
+*/
+
+/**
+ * @brief Bit definition of TDES0 register: DMA Tx descriptor status register
+ */
+#define ETH_DMATXDESC_OWN ((uint32_t)0x80000000) /*!< OWN bit: descriptor is owned by DMA engine */
+#define ETH_DMATXDESC_IC ((uint32_t)0x40000000) /*!< Interrupt on Completion */
+#define ETH_DMATXDESC_LS ((uint32_t)0x20000000) /*!< Last Segment */
+#define ETH_DMATXDESC_FS ((uint32_t)0x10000000) /*!< First Segment */
+#define ETH_DMATXDESC_DC ((uint32_t)0x08000000) /*!< Disable CRC */
+#define ETH_DMATXDESC_DP ((uint32_t)0x04000000) /*!< Disable Padding */
+#define ETH_DMATXDESC_TTSE ((uint32_t)0x02000000) /*!< Transmit Time Stamp Enable */
+#define ETH_DMATXDESC_CIC ((uint32_t)0x00C00000) /*!< Checksum Insertion Control: 4 cases */
+#define ETH_DMATXDESC_CIC_BYPASS ((uint32_t)0x00000000) /*!< Do Nothing: Checksum Engine is bypassed */
+#define ETH_DMATXDESC_CIC_IPV4HEADER ((uint32_t)0x00400000) /*!< IPV4 header Checksum Insertion */
+#define ETH_DMATXDESC_CIC_TCPUDPICMP_SEGMENT ((uint32_t)0x00800000) /*!< TCP/UDP/ICMP Checksum Insertion calculated over segment only */
+#define ETH_DMATXDESC_CIC_TCPUDPICMP_FULL ((uint32_t)0x00C00000) /*!< TCP/UDP/ICMP Checksum Insertion fully calculated */
+#define ETH_DMATXDESC_TER ((uint32_t)0x00200000) /*!< Transmit End of Ring */
+#define ETH_DMATXDESC_TCH ((uint32_t)0x00100000) /*!< Second Address Chained */
+#define ETH_DMATXDESC_TTSS ((uint32_t)0x00020000) /*!< Tx Time Stamp Status */
+#define ETH_DMATXDESC_IHE ((uint32_t)0x00010000) /*!< IP Header Error */
+#define ETH_DMATXDESC_ES ((uint32_t)0x00008000) /*!< Error summary: OR of the following bits: UE || ED || EC || LCO || NC || LCA || FF || JT */
+#define ETH_DMATXDESC_JT ((uint32_t)0x00004000) /*!< Jabber Timeout */
+#define ETH_DMATXDESC_FF ((uint32_t)0x00002000) /*!< Frame Flushed: DMA/MTL flushed the frame due to SW flush */
+#define ETH_DMATXDESC_PCE ((uint32_t)0x00001000) /*!< Payload Checksum Error */
+#define ETH_DMATXDESC_LCA ((uint32_t)0x00000800) /*!< Loss of Carrier: carrier lost during transmission */
+#define ETH_DMATXDESC_NC ((uint32_t)0x00000400) /*!< No Carrier: no carrier signal from the transceiver */
+#define ETH_DMATXDESC_LCO ((uint32_t)0x00000200) /*!< Late Collision: transmission aborted due to collision */
+#define ETH_DMATXDESC_EC ((uint32_t)0x00000100) /*!< Excessive Collision: transmission aborted after 16 collisions */
+#define ETH_DMATXDESC_VF ((uint32_t)0x00000080) /*!< VLAN Frame */
+#define ETH_DMATXDESC_CC ((uint32_t)0x00000078) /*!< Collision Count */
+#define ETH_DMATXDESC_ED ((uint32_t)0x00000004) /*!< Excessive Deferral */
+#define ETH_DMATXDESC_UF ((uint32_t)0x00000002) /*!< Underflow Error: late data arrival from the memory */
+#define ETH_DMATXDESC_DB ((uint32_t)0x00000001) /*!< Deferred Bit */
+
+/**
+ * @brief Bit definition of TDES1 register
+ */
+#define ETH_DMATXDESC_TBS2 ((uint32_t)0x1FFF0000) /*!< Transmit Buffer2 Size */
+#define ETH_DMATXDESC_TBS1 ((uint32_t)0x00001FFF) /*!< Transmit Buffer1 Size */
+
+/**
+ * @brief Bit definition of TDES2 register
+ */
+#define ETH_DMATXDESC_B1AP ((uint32_t)0xFFFFFFFF) /*!< Buffer1 Address Pointer */
+
+/**
+ * @brief Bit definition of TDES3 register
+ */
+#define ETH_DMATXDESC_B2AP ((uint32_t)0xFFFFFFFF) /*!< Buffer2 Address Pointer */
+
+ /*---------------------------------------------------------------------------------------------
+ TDES6 | Transmit Time Stamp Low [31:0] |
+ -----------------------------------------------------------------------------------------------
+ TDES7 | Transmit Time Stamp High [31:0] |
+ ----------------------------------------------------------------------------------------------*/
+
+/* Bit definition of TDES6 register */
+ #define ETH_DMAPTPTXDESC_TTSL ((uint32_t)0xFFFFFFFF) /* Transmit Time Stamp Low */
+
+/* Bit definition of TDES7 register */
+ #define ETH_DMAPTPTXDESC_TTSH ((uint32_t)0xFFFFFFFF) /* Transmit Time Stamp High */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup ETH_DMA_Rx_descriptor
+ * @{
+ */
+
+/*
+ DMA Rx Descriptor
+ --------------------------------------------------------------------------------------------------------------------
+ RDES0 | OWN(31) | Status [30:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES1 | CTRL(31) | Reserved[30:29] | Buffer2 ByteCount[28:16] | CTRL[15:14] | Reserved(13) | Buffer1 ByteCount[12:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES2 | Buffer1 Address [31:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES3 | Buffer2 Address [31:0] / Next Descriptor Address [31:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+*/
+
+/**
+ * @brief Bit definition of RDES0 register: DMA Rx descriptor status register
+ */
+#define ETH_DMARXDESC_OWN ((uint32_t)0x80000000) /*!< OWN bit: descriptor is owned by DMA engine */
+#define ETH_DMARXDESC_AFM ((uint32_t)0x40000000) /*!< DA Filter Fail for the rx frame */
+#define ETH_DMARXDESC_FL ((uint32_t)0x3FFF0000) /*!< Receive descriptor frame length */
+#define ETH_DMARXDESC_ES ((uint32_t)0x00008000) /*!< Error summary: OR of the following bits: DE || OE || IPC || LC || RWT || RE || CE */
+#define ETH_DMARXDESC_DE ((uint32_t)0x00004000) /*!< Descriptor error: no more descriptors for receive frame */
+#define ETH_DMARXDESC_SAF ((uint32_t)0x00002000) /*!< SA Filter Fail for the received frame */
+#define ETH_DMARXDESC_LE ((uint32_t)0x00001000) /*!< Frame size not matching with length field */
+#define ETH_DMARXDESC_OE ((uint32_t)0x00000800) /*!< Overflow Error: Frame was damaged due to buffer overflow */
+#define ETH_DMARXDESC_VLAN ((uint32_t)0x00000400) /*!< VLAN Tag: received frame is a VLAN frame */
+#define ETH_DMARXDESC_FS ((uint32_t)0x00000200) /*!< First descriptor of the frame */
+#define ETH_DMARXDESC_LS ((uint32_t)0x00000100) /*!< Last descriptor of the frame */
+#define ETH_DMARXDESC_IPV4HCE ((uint32_t)0x00000080) /*!< IPC Checksum Error: Rx Ipv4 header checksum error */
+#define ETH_DMARXDESC_LC ((uint32_t)0x00000040) /*!< Late collision occurred during reception */
+#define ETH_DMARXDESC_FT ((uint32_t)0x00000020) /*!< Frame type - Ethernet, otherwise 802.3 */
+#define ETH_DMARXDESC_RWT ((uint32_t)0x00000010) /*!< Receive Watchdog Timeout: watchdog timer expired during reception */
+#define ETH_DMARXDESC_RE ((uint32_t)0x00000008) /*!< Receive error: error reported by MII interface */
+#define ETH_DMARXDESC_DBE ((uint32_t)0x00000004) /*!< Dribble bit error: frame contains non int multiple of 8 bits */
+#define ETH_DMARXDESC_CE ((uint32_t)0x00000002) /*!< CRC error */
+#define ETH_DMARXDESC_MAMPCE ((uint32_t)0x00000001) /*!< Rx MAC Address/Payload Checksum Error: Rx MAC address matched/ Rx Payload Checksum Error */
+
+/**
+ * @brief Bit definition of RDES1 register
+ */
+#define ETH_DMARXDESC_DIC ((uint32_t)0x80000000) /*!< Disable Interrupt on Completion */
+#define ETH_DMARXDESC_RBS2 ((uint32_t)0x1FFF0000) /*!< Receive Buffer2 Size */
+#define ETH_DMARXDESC_RER ((uint32_t)0x00008000) /*!< Receive End of Ring */
+#define ETH_DMARXDESC_RCH ((uint32_t)0x00004000) /*!< Second Address Chained */
+#define ETH_DMARXDESC_RBS1 ((uint32_t)0x00001FFF) /*!< Receive Buffer1 Size */
+
+/**
+ * @brief Bit definition of RDES2 register
+ */
+#define ETH_DMARXDESC_B1AP ((uint32_t)0xFFFFFFFF) /*!< Buffer1 Address Pointer */
+
+/**
+ * @brief Bit definition of RDES3 register
+ */
+#define ETH_DMARXDESC_B2AP ((uint32_t)0xFFFFFFFF) /*!< Buffer2 Address Pointer */
+
+/*---------------------------------------------------------------------------------------------------------------------
+ RDES4 | Reserved[31:15] | Extended Status [14:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES5 | Reserved[31:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES6 | Receive Time Stamp Low [31:0] |
+ ---------------------------------------------------------------------------------------------------------------------
+ RDES7 | Receive Time Stamp High [31:0] |
+ --------------------------------------------------------------------------------------------------------------------*/
+
+/* Bit definition of RDES4 register */
+#define ETH_DMAPTPRXDESC_PTPV ((uint32_t)0x00002000) /* PTP Version */
+#define ETH_DMAPTPRXDESC_PTPFT ((uint32_t)0x00001000) /* PTP Frame Type */
+#define ETH_DMAPTPRXDESC_PTPMT ((uint32_t)0x00000F00) /* PTP Message Type */
+ #define ETH_DMAPTPRXDESC_PTPMT_SYNC ((uint32_t)0x00000100) /* SYNC message (all clock types) */
+ #define ETH_DMAPTPRXDESC_PTPMT_FOLLOWUP ((uint32_t)0x00000200) /* FollowUp message (all clock types) */
+ #define ETH_DMAPTPRXDESC_PTPMT_DELAYREQ ((uint32_t)0x00000300) /* DelayReq message (all clock types) */
+ #define ETH_DMAPTPRXDESC_PTPMT_DELAYRESP ((uint32_t)0x00000400) /* DelayResp message (all clock types) */
+ #define ETH_DMAPTPRXDESC_PTPMT_PDELAYREQ_ANNOUNCE ((uint32_t)0x00000500) /* PdelayReq message (peer-to-peer transparent clock) or Announce message (Ordinary or Boundary clock) */
+ #define ETH_DMAPTPRXDESC_PTPMT_PDELAYRESP_MANAG ((uint32_t)0x00000600) /* PdelayResp message (peer-to-peer transparent clock) or Management message (Ordinary or Boundary clock) */
+ #define ETH_DMAPTPRXDESC_PTPMT_PDELAYRESPFOLLOWUP_SIGNAL ((uint32_t)0x00000700) /* PdelayRespFollowUp message (peer-to-peer transparent clock) or Signaling message (Ordinary or Boundary clock) */
+#define ETH_DMAPTPRXDESC_IPV6PR ((uint32_t)0x00000080) /* IPv6 Packet Received */
+#define ETH_DMAPTPRXDESC_IPV4PR ((uint32_t)0x00000040) /* IPv4 Packet Received */
+#define ETH_DMAPTPRXDESC_IPCB ((uint32_t)0x00000020) /* IP Checksum Bypassed */
+#define ETH_DMAPTPRXDESC_IPPE ((uint32_t)0x00000010) /* IP Payload Error */
+#define ETH_DMAPTPRXDESC_IPHE ((uint32_t)0x00000008) /* IP Header Error */
+#define ETH_DMAPTPRXDESC_IPPT ((uint32_t)0x00000007) /* IP Payload Type */
+ #define ETH_DMAPTPRXDESC_IPPT_UDP ((uint32_t)0x00000001) /* UDP payload encapsulated in the IP datagram */
+ #define ETH_DMAPTPRXDESC_IPPT_TCP ((uint32_t)0x00000002) /* TCP payload encapsulated in the IP datagram */
+ #define ETH_DMAPTPRXDESC_IPPT_ICMP ((uint32_t)0x00000003) /* ICMP payload encapsulated in the IP datagram */
+
+/* Bit definition of RDES6 register */
+#define ETH_DMAPTPRXDESC_RTSL ((uint32_t)0xFFFFFFFF) /* Receive Time Stamp Low */
+
+/* Bit definition of RDES7 register */
+#define ETH_DMAPTPRXDESC_RTSH ((uint32_t)0xFFFFFFFF) /* Receive Time Stamp High */
+
+
+ /** @defgroup ETH_AutoNegotiation
+ * @{
+ */
+#define ETH_AUTONEGOTIATION_ENABLE ((uint32_t)0x00000001)
+#define ETH_AUTONEGOTIATION_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_AUTONEGOTIATION(CMD) (((CMD) == ETH_AUTONEGOTIATION_ENABLE) || \
+ ((CMD) == ETH_AUTONEGOTIATION_DISABLE))
+/**
+ * @}
+ */
+/** @defgroup ETH_Speed
+ * @{
+ */
+#define ETH_SPEED_10M ((uint32_t)0x00000000)
+#define ETH_SPEED_100M ((uint32_t)0x00004000)
+#define IS_ETH_SPEED(SPEED) (((SPEED) == ETH_SPEED_10M) || \
+ ((SPEED) == ETH_SPEED_100M))
+/**
+ * @}
+ */
+/** @defgroup ETH_Duplex_Mode
+ * @{
+ */
+#define ETH_MODE_FULLDUPLEX ((uint32_t)0x00000800)
+#define ETH_MODE_HALFDUPLEX ((uint32_t)0x00000000)
+#define IS_ETH_DUPLEX_MODE(MODE) (((MODE) == ETH_MODE_FULLDUPLEX) || \
+ ((MODE) == ETH_MODE_HALFDUPLEX))
+/**
+ * @}
+ */
+/** @defgroup ETH_Rx_Mode
+ * @{
+ */
+#define ETH_RXPOLLING_MODE ((uint32_t)0x00000000)
+#define ETH_RXINTERRUPT_MODE ((uint32_t)0x00000001)
+#define IS_ETH_RX_MODE(MODE) (((MODE) == ETH_RXPOLLING_MODE) || \
+ ((MODE) == ETH_RXINTERRUPT_MODE))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Checksum_Mode
+ * @{
+ */
+#define ETH_CHECKSUM_BY_HARDWARE ((uint32_t)0x00000000)
+#define ETH_CHECKSUM_BY_SOFTWARE ((uint32_t)0x00000001)
+#define IS_ETH_CHECKSUM_MODE(MODE) (((MODE) == ETH_CHECKSUM_BY_HARDWARE) || \
+ ((MODE) == ETH_CHECKSUM_BY_SOFTWARE))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Media_Interface
+ * @{
+ */
+#define ETH_MEDIA_INTERFACE_MII ((uint32_t)0x00000000)
+#define ETH_MEDIA_INTERFACE_RMII ((uint32_t)SYSCFG_PMC_MII_RMII_SEL)
+#define IS_ETH_MEDIA_INTERFACE(MODE) (((MODE) == ETH_MEDIA_INTERFACE_MII) || \
+ ((MODE) == ETH_MEDIA_INTERFACE_RMII))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_watchdog
+ * @{
+ */
+#define ETH_WATCHDOG_ENABLE ((uint32_t)0x00000000)
+#define ETH_WATCHDOG_DISABLE ((uint32_t)0x00800000)
+#define IS_ETH_WATCHDOG(CMD) (((CMD) == ETH_WATCHDOG_ENABLE) || \
+ ((CMD) == ETH_WATCHDOG_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Jabber
+ * @{
+ */
+#define ETH_JABBER_ENABLE ((uint32_t)0x00000000)
+#define ETH_JABBER_DISABLE ((uint32_t)0x00400000)
+#define IS_ETH_JABBER(CMD) (((CMD) == ETH_JABBER_ENABLE) || \
+ ((CMD) == ETH_JABBER_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Inter_Frame_Gap
+ * @{
+ */
+#define ETH_INTERFRAMEGAP_96BIT ((uint32_t)0x00000000) /*!< minimum IFG between frames during transmission is 96Bit */
+#define ETH_INTERFRAMEGAP_88BIT ((uint32_t)0x00020000) /*!< minimum IFG between frames during transmission is 88Bit */
+#define ETH_INTERFRAMEGAP_80BIT ((uint32_t)0x00040000) /*!< minimum IFG between frames during transmission is 80Bit */
+#define ETH_INTERFRAMEGAP_72BIT ((uint32_t)0x00060000) /*!< minimum IFG between frames during transmission is 72Bit */
+#define ETH_INTERFRAMEGAP_64BIT ((uint32_t)0x00080000) /*!< minimum IFG between frames during transmission is 64Bit */
+#define ETH_INTERFRAMEGAP_56BIT ((uint32_t)0x000A0000) /*!< minimum IFG between frames during transmission is 56Bit */
+#define ETH_INTERFRAMEGAP_48BIT ((uint32_t)0x000C0000) /*!< minimum IFG between frames during transmission is 48Bit */
+#define ETH_INTERFRAMEGAP_40BIT ((uint32_t)0x000E0000) /*!< minimum IFG between frames during transmission is 40Bit */
+#define IS_ETH_INTER_FRAME_GAP(GAP) (((GAP) == ETH_INTERFRAMEGAP_96BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_88BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_80BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_72BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_64BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_56BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_48BIT) || \
+ ((GAP) == ETH_INTERFRAMEGAP_40BIT))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Carrier_Sense
+ * @{
+ */
+#define ETH_CARRIERSENCE_ENABLE ((uint32_t)0x00000000)
+#define ETH_CARRIERSENCE_DISABLE ((uint32_t)0x00010000)
+#define IS_ETH_CARRIER_SENSE(CMD) (((CMD) == ETH_CARRIERSENCE_ENABLE) || \
+ ((CMD) == ETH_CARRIERSENCE_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_Own
+ * @{
+ */
+#define ETH_RECEIVEOWN_ENABLE ((uint32_t)0x00000000)
+#define ETH_RECEIVEOWN_DISABLE ((uint32_t)0x00002000)
+#define IS_ETH_RECEIVE_OWN(CMD) (((CMD) == ETH_RECEIVEOWN_ENABLE) || \
+ ((CMD) == ETH_RECEIVEOWN_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Loop_Back_Mode
+ * @{
+ */
+#define ETH_LOOPBACKMODE_ENABLE ((uint32_t)0x00001000)
+#define ETH_LOOPBACKMODE_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_LOOPBACK_MODE(CMD) (((CMD) == ETH_LOOPBACKMODE_ENABLE) || \
+ ((CMD) == ETH_LOOPBACKMODE_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Checksum_Offload
+ * @{
+ */
+#define ETH_CHECKSUMOFFLAOD_ENABLE ((uint32_t)0x00000400)
+#define ETH_CHECKSUMOFFLAOD_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_CHECKSUM_OFFLOAD(CMD) (((CMD) == ETH_CHECKSUMOFFLAOD_ENABLE) || \
+ ((CMD) == ETH_CHECKSUMOFFLAOD_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Retry_Transmission
+ * @{
+ */
+#define ETH_RETRYTRANSMISSION_ENABLE ((uint32_t)0x00000000)
+#define ETH_RETRYTRANSMISSION_DISABLE ((uint32_t)0x00000200)
+#define IS_ETH_RETRY_TRANSMISSION(CMD) (((CMD) == ETH_RETRYTRANSMISSION_ENABLE) || \
+ ((CMD) == ETH_RETRYTRANSMISSION_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Automatic_Pad_CRC_Strip
+ * @{
+ */
+#define ETH_AUTOMATICPADCRCSTRIP_ENABLE ((uint32_t)0x00000080)
+#define ETH_AUTOMATICPADCRCSTRIP_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_AUTOMATIC_PADCRC_STRIP(CMD) (((CMD) == ETH_AUTOMATICPADCRCSTRIP_ENABLE) || \
+ ((CMD) == ETH_AUTOMATICPADCRCSTRIP_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Back_Off_Limit
+ * @{
+ */
+#define ETH_BACKOFFLIMIT_10 ((uint32_t)0x00000000)
+#define ETH_BACKOFFLIMIT_8 ((uint32_t)0x00000020)
+#define ETH_BACKOFFLIMIT_4 ((uint32_t)0x00000040)
+#define ETH_BACKOFFLIMIT_1 ((uint32_t)0x00000060)
+#define IS_ETH_BACKOFF_LIMIT(LIMIT) (((LIMIT) == ETH_BACKOFFLIMIT_10) || \
+ ((LIMIT) == ETH_BACKOFFLIMIT_8) || \
+ ((LIMIT) == ETH_BACKOFFLIMIT_4) || \
+ ((LIMIT) == ETH_BACKOFFLIMIT_1))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Deferral_Check
+ * @{
+ */
+#define ETH_DEFFERRALCHECK_ENABLE ((uint32_t)0x00000010)
+#define ETH_DEFFERRALCHECK_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_DEFERRAL_CHECK(CMD) (((CMD) == ETH_DEFFERRALCHECK_ENABLE) || \
+ ((CMD) == ETH_DEFFERRALCHECK_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_All
+ * @{
+ */
+#define ETH_RECEIVEALL_ENABLE ((uint32_t)0x80000000)
+#define ETH_RECEIVEAll_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_RECEIVE_ALL(CMD) (((CMD) == ETH_RECEIVEALL_ENABLE) || \
+ ((CMD) == ETH_RECEIVEAll_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Source_Addr_Filter
+ * @{
+ */
+#define ETH_SOURCEADDRFILTER_NORMAL_ENABLE ((uint32_t)0x00000200)
+#define ETH_SOURCEADDRFILTER_INVERSE_ENABLE ((uint32_t)0x00000300)
+#define ETH_SOURCEADDRFILTER_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_SOURCE_ADDR_FILTER(CMD) (((CMD) == ETH_SOURCEADDRFILTER_NORMAL_ENABLE) || \
+ ((CMD) == ETH_SOURCEADDRFILTER_INVERSE_ENABLE) || \
+ ((CMD) == ETH_SOURCEADDRFILTER_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Pass_Control_Frames
+ * @{
+ */
+#define ETH_PASSCONTROLFRAMES_BLOCKALL ((uint32_t)0x00000040) /*!< MAC filters all control frames from reaching the application */
+#define ETH_PASSCONTROLFRAMES_FORWARDALL ((uint32_t)0x00000080) /*!< MAC forwards all control frames to application even if they fail the Address Filter */
+#define ETH_PASSCONTROLFRAMES_FORWARDPASSEDADDRFILTER ((uint32_t)0x000000C0) /*!< MAC forwards control frames that pass the Address Filter. */
+#define IS_ETH_CONTROL_FRAMES(PASS) (((PASS) == ETH_PASSCONTROLFRAMES_BLOCKALL) || \
+ ((PASS) == ETH_PASSCONTROLFRAMES_FORWARDALL) || \
+ ((PASS) == ETH_PASSCONTROLFRAMES_FORWARDPASSEDADDRFILTER))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Broadcast_Frames_Reception
+ * @{
+ */
+#define ETH_BROADCASTFRAMESRECEPTION_ENABLE ((uint32_t)0x00000000)
+#define ETH_BROADCASTFRAMESRECEPTION_DISABLE ((uint32_t)0x00000020)
+#define IS_ETH_BROADCAST_FRAMES_RECEPTION(CMD) (((CMD) == ETH_BROADCASTFRAMESRECEPTION_ENABLE) || \
+ ((CMD) == ETH_BROADCASTFRAMESRECEPTION_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Destination_Addr_Filter
+ * @{
+ */
+#define ETH_DESTINATIONADDRFILTER_NORMAL ((uint32_t)0x00000000)
+#define ETH_DESTINATIONADDRFILTER_INVERSE ((uint32_t)0x00000008)
+#define IS_ETH_DESTINATION_ADDR_FILTER(FILTER) (((FILTER) == ETH_DESTINATIONADDRFILTER_NORMAL) || \
+ ((FILTER) == ETH_DESTINATIONADDRFILTER_INVERSE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Promiscuous_Mode
+ * @{
+ */
+#define ETH_PROMISCIOUSMODE_ENABLE ((uint32_t)0x00000001)
+#define ETH_PROMISCIOUSMODE_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_PROMISCIOUS_MODE(CMD) (((CMD) == ETH_PROMISCIOUSMODE_ENABLE) || \
+ ((CMD) == ETH_PROMISCIOUSMODE_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Multicast_Frames_Filter
+ * @{
+ */
+#define ETH_MULTICASTFRAMESFILTER_PERFECTHASHTABLE ((uint32_t)0x00000404)
+#define ETH_MULTICASTFRAMESFILTER_HASHTABLE ((uint32_t)0x00000004)
+#define ETH_MULTICASTFRAMESFILTER_PERFECT ((uint32_t)0x00000000)
+#define ETH_MULTICASTFRAMESFILTER_NONE ((uint32_t)0x00000010)
+#define IS_ETH_MULTICAST_FRAMES_FILTER(FILTER) (((FILTER) == ETH_MULTICASTFRAMESFILTER_PERFECTHASHTABLE) || \
+ ((FILTER) == ETH_MULTICASTFRAMESFILTER_HASHTABLE) || \
+ ((FILTER) == ETH_MULTICASTFRAMESFILTER_PERFECT) || \
+ ((FILTER) == ETH_MULTICASTFRAMESFILTER_NONE))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Unicast_Frames_Filter
+ * @{
+ */
+#define ETH_UNICASTFRAMESFILTER_PERFECTHASHTABLE ((uint32_t)0x00000402)
+#define ETH_UNICASTFRAMESFILTER_HASHTABLE ((uint32_t)0x00000002)
+#define ETH_UNICASTFRAMESFILTER_PERFECT ((uint32_t)0x00000000)
+#define IS_ETH_UNICAST_FRAMES_FILTER(FILTER) (((FILTER) == ETH_UNICASTFRAMESFILTER_PERFECTHASHTABLE) || \
+ ((FILTER) == ETH_UNICASTFRAMESFILTER_HASHTABLE) || \
+ ((FILTER) == ETH_UNICASTFRAMESFILTER_PERFECT))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Pause_Time
+ * @{
+ */
+#define IS_ETH_PAUSE_TIME(TIME) ((TIME) <= 0xFFFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Zero_Quanta_Pause
+ * @{
+ */
+#define ETH_ZEROQUANTAPAUSE_ENABLE ((uint32_t)0x00000000)
+#define ETH_ZEROQUANTAPAUSE_DISABLE ((uint32_t)0x00000080)
+#define IS_ETH_ZEROQUANTA_PAUSE(CMD) (((CMD) == ETH_ZEROQUANTAPAUSE_ENABLE) || \
+ ((CMD) == ETH_ZEROQUANTAPAUSE_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Pause_Low_Threshold
+ * @{
+ */
+#define ETH_PAUSELOWTHRESHOLD_MINUS4 ((uint32_t)0x00000000) /*!< Pause time minus 4 slot times */
+#define ETH_PAUSELOWTHRESHOLD_MINUS28 ((uint32_t)0x00000010) /*!< Pause time minus 28 slot times */
+#define ETH_PAUSELOWTHRESHOLD_MINUS144 ((uint32_t)0x00000020) /*!< Pause time minus 144 slot times */
+#define ETH_PAUSELOWTHRESHOLD_MINUS256 ((uint32_t)0x00000030) /*!< Pause time minus 256 slot times */
+#define IS_ETH_PAUSE_LOW_THRESHOLD(THRESHOLD) (((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS4) || \
+ ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS28) || \
+ ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS144) || \
+ ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS256))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Unicast_Pause_Frame_Detect
+ * @{
+ */
+#define ETH_UNICASTPAUSEFRAMEDETECT_ENABLE ((uint32_t)0x00000008)
+#define ETH_UNICASTPAUSEFRAMEDETECT_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_UNICAST_PAUSE_FRAME_DETECT(CMD) (((CMD) == ETH_UNICASTPAUSEFRAMEDETECT_ENABLE) || \
+ ((CMD) == ETH_UNICASTPAUSEFRAMEDETECT_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_Flow_Control
+ * @{
+ */
+#define ETH_RECEIVEFLOWCONTROL_ENABLE ((uint32_t)0x00000004)
+#define ETH_RECEIVEFLOWCONTROL_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_RECEIVE_FLOWCONTROL(CMD) (((CMD) == ETH_RECEIVEFLOWCONTROL_ENABLE) || \
+ ((CMD) == ETH_RECEIVEFLOWCONTROL_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Transmit_Flow_Control
+ * @{
+ */
+#define ETH_TRANSMITFLOWCONTROL_ENABLE ((uint32_t)0x00000002)
+#define ETH_TRANSMITFLOWCONTROL_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_TRANSMIT_FLOWCONTROL(CMD) (((CMD) == ETH_TRANSMITFLOWCONTROL_ENABLE) || \
+ ((CMD) == ETH_TRANSMITFLOWCONTROL_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_VLAN_Tag_Comparison
+ * @{
+ */
+#define ETH_VLANTAGCOMPARISON_12BIT ((uint32_t)0x00010000)
+#define ETH_VLANTAGCOMPARISON_16BIT ((uint32_t)0x00000000)
+#define IS_ETH_VLAN_TAG_COMPARISON(COMPARISON) (((COMPARISON) == ETH_VLANTAGCOMPARISON_12BIT) || \
+ ((COMPARISON) == ETH_VLANTAGCOMPARISON_16BIT))
+#define IS_ETH_VLAN_TAG_IDENTIFIER(IDENTIFIER) ((IDENTIFIER) <= 0xFFFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_addresses
+ * @{
+ */
+#define ETH_MAC_ADDRESS0 ((uint32_t)0x00000000)
+#define ETH_MAC_ADDRESS1 ((uint32_t)0x00000008)
+#define ETH_MAC_ADDRESS2 ((uint32_t)0x00000010)
+#define ETH_MAC_ADDRESS3 ((uint32_t)0x00000018)
+#define IS_ETH_MAC_ADDRESS0123(ADDRESS) (((ADDRESS) == ETH_MAC_ADDRESS0) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS1) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS2) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS3))
+#define IS_ETH_MAC_ADDRESS123(ADDRESS) (((ADDRESS) == ETH_MAC_ADDRESS1) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS2) || \
+ ((ADDRESS) == ETH_MAC_ADDRESS3))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_addresses_filter_SA_DA_filed_of_received_frames
+ * @{
+ */
+#define ETH_MAC_ADDRESSFILTER_SA ((uint32_t)0x00000000)
+#define ETH_MAC_ADDRESSFILTER_DA ((uint32_t)0x00000008)
+#define IS_ETH_MAC_ADDRESS_FILTER(FILTER) (((FILTER) == ETH_MAC_ADDRESSFILTER_SA) || \
+ ((FILTER) == ETH_MAC_ADDRESSFILTER_DA))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_addresses_filter_Mask_bytes
+ * @{
+ */
+#define ETH_MAC_ADDRESSMASK_BYTE6 ((uint32_t)0x20000000) /*!< Mask MAC Address high reg bits [15:8] */
+#define ETH_MAC_ADDRESSMASK_BYTE5 ((uint32_t)0x10000000) /*!< Mask MAC Address high reg bits [7:0] */
+#define ETH_MAC_ADDRESSMASK_BYTE4 ((uint32_t)0x08000000) /*!< Mask MAC Address low reg bits [31:24] */
+#define ETH_MAC_ADDRESSMASK_BYTE3 ((uint32_t)0x04000000) /*!< Mask MAC Address low reg bits [23:16] */
+#define ETH_MAC_ADDRESSMASK_BYTE2 ((uint32_t)0x02000000) /*!< Mask MAC Address low reg bits [15:8] */
+#define ETH_MAC_ADDRESSMASK_BYTE1 ((uint32_t)0x01000000) /*!< Mask MAC Address low reg bits [70] */
+#define IS_ETH_MAC_ADDRESS_MASK(MASK) (((MASK) == ETH_MAC_ADDRESSMASK_BYTE6) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE5) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE4) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE3) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE2) || \
+ ((MASK) == ETH_MAC_ADDRESSMASK_BYTE1))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_Debug_flags
+ * @{
+ */
+#define ETH_MAC_TXFIFO_FULL ((uint32_t)0x02000000) /* Tx FIFO full */
+
+#define ETH_MAC_TXFIFONOT_EMPTY ((uint32_t)0x01000000) /* Tx FIFO not empty */
+
+#define ETH_MAC_TXFIFO_WRITE_ACTIVE ((uint32_t)0x00400000) /* Tx FIFO write active */
+
+#define ETH_MAC_TXFIFO_IDLE ((uint32_t)0x00000000) /* Tx FIFO read status: Idle */
+#define ETH_MAC_TXFIFO_READ ((uint32_t)0x00100000) /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */
+#define ETH_MAC_TXFIFO_WAITING ((uint32_t)0x00200000) /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */
+#define ETH_MAC_TXFIFO_WRITING ((uint32_t)0x00300000) /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */
+
+#define ETH_MAC_TRANSMISSION_PAUSE ((uint32_t)0x00080000) /* MAC transmitter in pause */
+
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE ((uint32_t)0x00000000) /* MAC transmit frame controller: Idle */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING ((uint32_t)0x00020000) /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF ((uint32_t)0x00040000) /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */
+#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING ((uint32_t)0x00060000) /* MAC transmit frame controller: Transferring input frame for transmission */
+
+#define ETH_MAC_MII_TRANSMIT_ACTIVE ((uint32_t)0x00010000) /* MAC MII transmit engine active */
+
+#define ETH_MAC_RXFIFO_EMPTY ((uint32_t)0x00000000) /* Rx FIFO fill level: empty */
+#define ETH_MAC_RXFIFO_BELOW_THRESHOLD ((uint32_t)0x00000100) /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */
+#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD ((uint32_t)0x00000200) /* Rx FIFO fill level: fill-level above flow-control activate threshold */
+#define ETH_MAC_RXFIFO_FULL ((uint32_t)0x00000300) /* Rx FIFO fill level: full */
+
+#define ETH_MAC_READCONTROLLER_IDLE ((uint32_t)0x00000060) /* Rx FIFO read controller IDLE state */
+#define ETH_MAC_READCONTROLLER_READING_DATA ((uint32_t)0x00000060) /* Rx FIFO read controller Reading frame data */
+#define ETH_MAC_READCONTROLLER_READING_STATUS ((uint32_t)0x00000060) /* Rx FIFO read controller Reading frame status (or time-stamp) */
+#define ETH_MAC_READCONTROLLER_ FLUSHING ((uint32_t)0x00000060) /* Rx FIFO read controller Flushing the frame data and status */
+
+#define ETH_MAC_RXFIFO_WRITE_ACTIVE ((uint32_t)0x00000010) /* Rx FIFO write controller active */
+
+#define ETH_MAC_SMALL_FIFO_NOTACTIVE ((uint32_t)0x00000000) /* MAC small FIFO read / write controllers not active */
+#define ETH_MAC_SMALL_FIFO_READ_ACTIVE ((uint32_t)0x00000002) /* MAC small FIFO read controller active */
+#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE ((uint32_t)0x00000004) /* MAC small FIFO write controller active */
+#define ETH_MAC_SMALL_FIFO_RW_ACTIVE ((uint32_t)0x00000006) /* MAC small FIFO read / write controllers active */
+
+#define ETH_MAC_MII_RECEIVE_PROTOCOL_AVTIVE ((uint32_t)0x00000001) /* MAC MII receive protocol engine active */
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Drop_TCP_IP_Checksum_Error_Frame
+ * @{
+ */
+#define ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE ((uint32_t)0x00000000)
+#define ETH_DROPTCPIPCHECKSUMERRORFRAME_DISABLE ((uint32_t)0x04000000)
+#define IS_ETH_DROP_TCPIP_CHECKSUM_FRAME(CMD) (((CMD) == ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE) || \
+ ((CMD) == ETH_DROPTCPIPCHECKSUMERRORFRAME_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_Store_Forward
+ * @{
+ */
+#define ETH_RECEIVESTOREFORWARD_ENABLE ((uint32_t)0x02000000)
+#define ETH_RECEIVESTOREFORWARD_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_RECEIVE_STORE_FORWARD(CMD) (((CMD) == ETH_RECEIVESTOREFORWARD_ENABLE) || \
+ ((CMD) == ETH_RECEIVESTOREFORWARD_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Flush_Received_Frame
+ * @{
+ */
+#define ETH_FLUSHRECEIVEDFRAME_ENABLE ((uint32_t)0x00000000)
+#define ETH_FLUSHRECEIVEDFRAME_DISABLE ((uint32_t)0x01000000)
+#define IS_ETH_FLUSH_RECEIVE_FRAME(CMD) (((CMD) == ETH_FLUSHRECEIVEDFRAME_ENABLE) || \
+ ((CMD) == ETH_FLUSHRECEIVEDFRAME_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Transmit_Store_Forward
+ * @{
+ */
+#define ETH_TRANSMITSTOREFORWARD_ENABLE ((uint32_t)0x00200000)
+#define ETH_TRANSMITSTOREFORWARD_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_TRANSMIT_STORE_FORWARD(CMD) (((CMD) == ETH_TRANSMITSTOREFORWARD_ENABLE) || \
+ ((CMD) == ETH_TRANSMITSTOREFORWARD_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Transmit_Threshold_Control
+ * @{
+ */
+#define ETH_TRANSMITTHRESHOLDCONTROL_64BYTES ((uint32_t)0x00000000) /*!< threshold level of the MTL Transmit FIFO is 64 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_128BYTES ((uint32_t)0x00004000) /*!< threshold level of the MTL Transmit FIFO is 128 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_192BYTES ((uint32_t)0x00008000) /*!< threshold level of the MTL Transmit FIFO is 192 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_256BYTES ((uint32_t)0x0000C000) /*!< threshold level of the MTL Transmit FIFO is 256 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_40BYTES ((uint32_t)0x00010000) /*!< threshold level of the MTL Transmit FIFO is 40 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_32BYTES ((uint32_t)0x00014000) /*!< threshold level of the MTL Transmit FIFO is 32 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_24BYTES ((uint32_t)0x00018000) /*!< threshold level of the MTL Transmit FIFO is 24 Bytes */
+#define ETH_TRANSMITTHRESHOLDCONTROL_16BYTES ((uint32_t)0x0001C000) /*!< threshold level of the MTL Transmit FIFO is 16 Bytes */
+#define IS_ETH_TRANSMIT_THRESHOLD_CONTROL(THRESHOLD) (((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_64BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_128BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_192BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_256BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_40BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_32BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_24BYTES) || \
+ ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_16BYTES))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Forward_Error_Frames
+ * @{
+ */
+#define ETH_FORWARDERRORFRAMES_ENABLE ((uint32_t)0x00000080)
+#define ETH_FORWARDERRORFRAMES_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_FORWARD_ERROR_FRAMES(CMD) (((CMD) == ETH_FORWARDERRORFRAMES_ENABLE) || \
+ ((CMD) == ETH_FORWARDERRORFRAMES_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Forward_Undersized_Good_Frames
+ * @{
+ */
+#define ETH_FORWARDUNDERSIZEDGOODFRAMES_ENABLE ((uint32_t)0x00000040)
+#define ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_FORWARD_UNDERSIZED_GOOD_FRAMES(CMD) (((CMD) == ETH_FORWARDUNDERSIZEDGOODFRAMES_ENABLE) || \
+ ((CMD) == ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Receive_Threshold_Control
+ * @{
+ */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES ((uint32_t)0x00000000) /*!< threshold level of the MTL Receive FIFO is 64 Bytes */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_32BYTES ((uint32_t)0x00000008) /*!< threshold level of the MTL Receive FIFO is 32 Bytes */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_96BYTES ((uint32_t)0x00000010) /*!< threshold level of the MTL Receive FIFO is 96 Bytes */
+#define ETH_RECEIVEDTHRESHOLDCONTROL_128BYTES ((uint32_t)0x00000018) /*!< threshold level of the MTL Receive FIFO is 128 Bytes */
+#define IS_ETH_RECEIVE_THRESHOLD_CONTROL(THRESHOLD) (((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES) || \
+ ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_32BYTES) || \
+ ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_96BYTES) || \
+ ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_128BYTES))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Second_Frame_Operate
+ * @{
+ */
+#define ETH_SECONDFRAMEOPERARTE_ENABLE ((uint32_t)0x00000004)
+#define ETH_SECONDFRAMEOPERARTE_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_SECOND_FRAME_OPERATE(CMD) (((CMD) == ETH_SECONDFRAMEOPERARTE_ENABLE) || \
+ ((CMD) == ETH_SECONDFRAMEOPERARTE_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Address_Aligned_Beats
+ * @{
+ */
+#define ETH_ADDRESSALIGNEDBEATS_ENABLE ((uint32_t)0x02000000)
+#define ETH_ADDRESSALIGNEDBEATS_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_ADDRESS_ALIGNED_BEATS(CMD) (((CMD) == ETH_ADDRESSALIGNEDBEATS_ENABLE) || \
+ ((CMD) == ETH_ADDRESSALIGNEDBEATS_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Fixed_Burst
+ * @{
+ */
+#define ETH_FIXEDBURST_ENABLE ((uint32_t)0x00010000)
+#define ETH_FIXEDBURST_DISABLE ((uint32_t)0x00000000)
+#define IS_ETH_FIXED_BURST(CMD) (((CMD) == ETH_FIXEDBURST_ENABLE) || \
+ ((CMD) == ETH_FIXEDBURST_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Rx_DMA_Burst_Length
+ * @{
+ */
+#define ETH_RXDMABURSTLENGTH_1BEAT ((uint32_t)0x00020000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 1 */
+#define ETH_RXDMABURSTLENGTH_2BEAT ((uint32_t)0x00040000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 2 */
+#define ETH_RXDMABURSTLENGTH_4BEAT ((uint32_t)0x00080000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 4 */
+#define ETH_RXDMABURSTLENGTH_8BEAT ((uint32_t)0x00100000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 8 */
+#define ETH_RXDMABURSTLENGTH_16BEAT ((uint32_t)0x00200000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 16 */
+#define ETH_RXDMABURSTLENGTH_32BEAT ((uint32_t)0x00400000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 32 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_4BEAT ((uint32_t)0x01020000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 4 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_8BEAT ((uint32_t)0x01040000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 8 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_16BEAT ((uint32_t)0x01080000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 16 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_32BEAT ((uint32_t)0x01100000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 32 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_64BEAT ((uint32_t)0x01200000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 64 */
+#define ETH_RXDMABURSTLENGTH_4XPBL_128BEAT ((uint32_t)0x01400000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 128 */
+
+#define IS_ETH_RXDMA_BURST_LENGTH(LENGTH) (((LENGTH) == ETH_RXDMABURSTLENGTH_1BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_2BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_8BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_16BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_32BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_4BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_8BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_16BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_32BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_64BEAT) || \
+ ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_128BEAT))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_Tx_DMA_Burst_Length
+ * @{
+ */
+#define ETH_TXDMABURSTLENGTH_1BEAT ((uint32_t)0x00000100) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 1 */
+#define ETH_TXDMABURSTLENGTH_2BEAT ((uint32_t)0x00000200) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 2 */
+#define ETH_TXDMABURSTLENGTH_4BEAT ((uint32_t)0x00000400) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+#define ETH_TXDMABURSTLENGTH_8BEAT ((uint32_t)0x00000800) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+#define ETH_TXDMABURSTLENGTH_16BEAT ((uint32_t)0x00001000) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+#define ETH_TXDMABURSTLENGTH_32BEAT ((uint32_t)0x00002000) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_4BEAT ((uint32_t)0x01000100) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_8BEAT ((uint32_t)0x01000200) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_16BEAT ((uint32_t)0x01000400) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_32BEAT ((uint32_t)0x01000800) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_64BEAT ((uint32_t)0x01001000) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 64 */
+#define ETH_TXDMABURSTLENGTH_4XPBL_128BEAT ((uint32_t)0x01002000) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 128 */
+
+#define IS_ETH_TXDMA_BURST_LENGTH(LENGTH) (((LENGTH) == ETH_TXDMABURSTLENGTH_1BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_2BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_8BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_16BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_32BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_4BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_8BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_16BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_32BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_64BEAT) || \
+ ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_128BEAT))
+
+/** @defgroup ETH_DMA_Enhanced_descriptor_format
+ * @{
+ */
+#define ETH_DMAENHANCEDDESCRIPTOR_ENABLE ((uint32_t)0x00000080)
+#define ETH_DMAENHANCEDDESCRIPTOR_DISABLE ((uint32_t)0x00000000)
+
+#define IS_ETH_ENHANCED_DESCRIPTOR_FORMAT(CMD) (((CMD) == ETH_DMAENHANCEDDESCRIPTOR_ENABLE) || \
+ ((CMD) == ETH_DMAENHANCEDDESCRIPTOR_DISABLE))
+
+/**
+ * @}
+ */
+
+/**
+ * @brief ETH DMA Descriptor SkipLength
+ */
+#define IS_ETH_DMA_DESC_SKIP_LENGTH(LENGTH) ((LENGTH) <= 0x1F)
+
+
+/** @defgroup ETH_DMA_Arbitration
+ * @{
+ */
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1 ((uint32_t)0x00000000)
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_2_1 ((uint32_t)0x00004000)
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_3_1 ((uint32_t)0x00008000)
+#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_4_1 ((uint32_t)0x0000C000)
+#define ETH_DMAARBITRATION_RXPRIORTX ((uint32_t)0x00000002)
+#define IS_ETH_DMA_ARBITRATION_ROUNDROBIN_RXTX(RATIO) (((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1) || \
+ ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_2_1) || \
+ ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_3_1) || \
+ ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_4_1) || \
+ ((RATIO) == ETH_DMAARBITRATION_RXPRIORTX))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Tx_descriptor_flags
+ * @{
+ */
+#define IS_ETH_DMATXDESC_GET_FLAG(FLAG) (((FLAG) == ETH_DMATXDESC_OWN) || \
+ ((FLAG) == ETH_DMATXDESC_IC) || \
+ ((FLAG) == ETH_DMATXDESC_LS) || \
+ ((FLAG) == ETH_DMATXDESC_FS) || \
+ ((FLAG) == ETH_DMATXDESC_DC) || \
+ ((FLAG) == ETH_DMATXDESC_DP) || \
+ ((FLAG) == ETH_DMATXDESC_TTSE) || \
+ ((FLAG) == ETH_DMATXDESC_TER) || \
+ ((FLAG) == ETH_DMATXDESC_TCH) || \
+ ((FLAG) == ETH_DMATXDESC_TTSS) || \
+ ((FLAG) == ETH_DMATXDESC_IHE) || \
+ ((FLAG) == ETH_DMATXDESC_ES) || \
+ ((FLAG) == ETH_DMATXDESC_JT) || \
+ ((FLAG) == ETH_DMATXDESC_FF) || \
+ ((FLAG) == ETH_DMATXDESC_PCE) || \
+ ((FLAG) == ETH_DMATXDESC_LCA) || \
+ ((FLAG) == ETH_DMATXDESC_NC) || \
+ ((FLAG) == ETH_DMATXDESC_LCO) || \
+ ((FLAG) == ETH_DMATXDESC_EC) || \
+ ((FLAG) == ETH_DMATXDESC_VF) || \
+ ((FLAG) == ETH_DMATXDESC_CC) || \
+ ((FLAG) == ETH_DMATXDESC_ED) || \
+ ((FLAG) == ETH_DMATXDESC_UF) || \
+ ((FLAG) == ETH_DMATXDESC_DB))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Tx_descriptor_segment
+ * @{
+ */
+#define ETH_DMATXDESC_LASTSEGMENTS ((uint32_t)0x40000000) /*!< Last Segment */
+#define ETH_DMATXDESC_FIRSTSEGMENT ((uint32_t)0x20000000) /*!< First Segment */
+#define IS_ETH_DMA_TXDESC_SEGMENT(SEGMENT) (((SEGMENT) == ETH_DMATXDESC_LASTSEGMENTS) || \
+ ((SEGMENT) == ETH_DMATXDESC_FIRSTSEGMENT))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Tx_descriptor_Checksum_Insertion_Control
+ * @{
+ */
+#define ETH_DMATXDESC_CHECKSUMBYPASS ((uint32_t)0x00000000) /*!< Checksum engine bypass */
+#define ETH_DMATXDESC_CHECKSUMIPV4HEADER ((uint32_t)0x00400000) /*!< IPv4 header checksum insertion */
+#define ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT ((uint32_t)0x00800000) /*!< TCP/UDP/ICMP checksum insertion. Pseudo header checksum is assumed to be present */
+#define ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL ((uint32_t)0x00C00000) /*!< TCP/UDP/ICMP checksum fully in hardware including pseudo header */
+#define IS_ETH_DMA_TXDESC_CHECKSUM(CHECKSUM) (((CHECKSUM) == ETH_DMATXDESC_CHECKSUMBYPASS) || \
+ ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMIPV4HEADER) || \
+ ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT) || \
+ ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL))
+/**
+ * @brief ETH DMA Tx Desciptor buffer size
+ */
+#define IS_ETH_DMATXDESC_BUFFER_SIZE(SIZE) ((SIZE) <= 0x1FFF)
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Rx_descriptor_flags
+ * @{
+ */
+#define IS_ETH_DMARXDESC_GET_FLAG(FLAG) (((FLAG) == ETH_DMARXDESC_OWN) || \
+ ((FLAG) == ETH_DMARXDESC_AFM) || \
+ ((FLAG) == ETH_DMARXDESC_ES) || \
+ ((FLAG) == ETH_DMARXDESC_DE) || \
+ ((FLAG) == ETH_DMARXDESC_SAF) || \
+ ((FLAG) == ETH_DMARXDESC_LE) || \
+ ((FLAG) == ETH_DMARXDESC_OE) || \
+ ((FLAG) == ETH_DMARXDESC_VLAN) || \
+ ((FLAG) == ETH_DMARXDESC_FS) || \
+ ((FLAG) == ETH_DMARXDESC_LS) || \
+ ((FLAG) == ETH_DMARXDESC_IPV4HCE) || \
+ ((FLAG) == ETH_DMARXDESC_LC) || \
+ ((FLAG) == ETH_DMARXDESC_FT) || \
+ ((FLAG) == ETH_DMARXDESC_RWT) || \
+ ((FLAG) == ETH_DMARXDESC_RE) || \
+ ((FLAG) == ETH_DMARXDESC_DBE) || \
+ ((FLAG) == ETH_DMARXDESC_CE) || \
+ ((FLAG) == ETH_DMARXDESC_MAMPCE))
+
+/* ETHERNET DMA PTP Rx descriptor extended flags --------------------------------*/
+#define IS_ETH_DMAPTPRXDESC_GET_EXTENDED_FLAG(FLAG) (((FLAG) == ETH_DMAPTPRXDESC_PTPV) || \
+ ((FLAG) == ETH_DMAPTPRXDESC_PTPFT) || \
+ ((FLAG) == ETH_DMAPTPRXDESC_PTPMT) || \
+ ((FLAG) == ETH_DMAPTPRXDESC_IPV6PR) || \
+ ((FLAG) == ETH_DMAPTPRXDESC_IPV4PR) || \
+ ((FLAG) == ETH_DMAPTPRXDESC_IPCB) || \
+ ((FLAG) == ETH_DMAPTPRXDESC_IPPE) || \
+ ((FLAG) == ETH_DMAPTPRXDESC_IPHE) || \
+ ((FLAG) == ETH_DMAPTPRXDESC_IPPT))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Rx_descriptor_buffers_
+ * @{
+ */
+#define ETH_DMARXDESC_BUFFER1 ((uint32_t)0x00000000) /*!< DMA Rx Desc Buffer1 */
+#define ETH_DMARXDESC_BUFFER2 ((uint32_t)0x00000001) /*!< DMA Rx Desc Buffer2 */
+#define IS_ETH_DMA_RXDESC_BUFFER(BUFFER) (((BUFFER) == ETH_DMARXDESC_BUFFER1) || \
+ ((BUFFER) == ETH_DMARXDESC_BUFFER2))
+
+
+/* ETHERNET DMA Tx descriptors Collision Count Shift */
+#define ETH_DMATXDESC_COLLISION_COUNTSHIFT ((uint32_t)3)
+
+/* ETHERNET DMA Tx descriptors Buffer2 Size Shift */
+#define ETH_DMATXDESC_BUFFER2_SIZESHIFT ((uint32_t)16)
+
+/* ETHERNET DMA Rx descriptors Frame Length Shift */
+#define ETH_DMARXDESC_FRAME_LENGTHSHIFT ((uint32_t)16)
+
+/* ETHERNET DMA Rx descriptors Buffer2 Size Shift */
+#define ETH_DMARXDESC_BUFFER2_SIZESHIFT ((uint32_t)16)
+
+/* ETHERNET DMA Rx descriptors Frame length Shift */
+#define ETH_DMARXDESC_FRAMELENGTHSHIFT ((uint32_t)16)
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_PMT_Flags
+ * @{
+ */
+#define ETH_PMT_FLAG_WUFFRPR ((uint32_t)0x80000000) /*!< Wake-Up Frame Filter Register Pointer Reset */
+#define ETH_PMT_FLAG_WUFR ((uint32_t)0x00000040) /*!< Wake-Up Frame Received */
+#define ETH_PMT_FLAG_MPR ((uint32_t)0x00000020) /*!< Magic Packet Received */
+#define IS_ETH_PMT_GET_FLAG(FLAG) (((FLAG) == ETH_PMT_FLAG_WUFR) || \
+ ((FLAG) == ETH_PMT_FLAG_MPR))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MMC_Tx_Interrupts
+ * @{
+ */
+#define ETH_MMC_IT_TGF ((uint32_t)0x00200000) /*!< When Tx good frame counter reaches half the maximum value */
+#define ETH_MMC_IT_TGFMSC ((uint32_t)0x00008000) /*!< When Tx good multi col counter reaches half the maximum value */
+#define ETH_MMC_IT_TGFSC ((uint32_t)0x00004000) /*!< When Tx good single col counter reaches half the maximum value */
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MMC_Rx_Interrupts
+ * @{
+ */
+#define ETH_MMC_IT_RGUF ((uint32_t)0x10020000) /*!< When Rx good unicast frames counter reaches half the maximum value */
+#define ETH_MMC_IT_RFAE ((uint32_t)0x10000040) /*!< When Rx alignment error counter reaches half the maximum value */
+#define ETH_MMC_IT_RFCE ((uint32_t)0x10000020) /*!< When Rx crc error counter reaches half the maximum value */
+#define IS_ETH_MMC_IT(IT) (((((IT) & (uint32_t)0xFFDF3FFF) == 0x00) || (((IT) & (uint32_t)0xEFFDFF9F) == 0x00)) && \
+ ((IT) != 0x00))
+#define IS_ETH_MMC_GET_IT(IT) (((IT) == ETH_MMC_IT_TGF) || ((IT) == ETH_MMC_IT_TGFMSC) || \
+ ((IT) == ETH_MMC_IT_TGFSC) || ((IT) == ETH_MMC_IT_RGUF) || \
+ ((IT) == ETH_MMC_IT_RFAE) || ((IT) == ETH_MMC_IT_RFCE))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MMC_Registers
+ * @{
+ */
+#define ETH_MMCCR ((uint32_t)0x00000100) /*!< MMC CR register */
+#define ETH_MMCRIR ((uint32_t)0x00000104) /*!< MMC RIR register */
+#define ETH_MMCTIR ((uint32_t)0x00000108) /*!< MMC TIR register */
+#define ETH_MMCRIMR ((uint32_t)0x0000010C) /*!< MMC RIMR register */
+#define ETH_MMCTIMR ((uint32_t)0x00000110) /*!< MMC TIMR register */
+#define ETH_MMCTGFSCCR ((uint32_t)0x0000014C) /*!< MMC TGFSCCR register */
+#define ETH_MMCTGFMSCCR ((uint32_t)0x00000150) /*!< MMC TGFMSCCR register */
+#define ETH_MMCTGFCR ((uint32_t)0x00000168) /*!< MMC TGFCR register */
+#define ETH_MMCRFCECR ((uint32_t)0x00000194) /*!< MMC RFCECR register */
+#define ETH_MMCRFAECR ((uint32_t)0x00000198) /*!< MMC RFAECR register */
+#define ETH_MMCRGUFCR ((uint32_t)0x000001C4) /*!< MMC RGUFCR register */
+
+/**
+ * @brief ETH MMC registers
+ */
+#define IS_ETH_MMC_REGISTER(REG) (((REG) == ETH_MMCCR) || ((REG) == ETH_MMCRIR) || \
+ ((REG) == ETH_MMCTIR) || ((REG) == ETH_MMCRIMR) || \
+ ((REG) == ETH_MMCTIMR) || ((REG) == ETH_MMCTGFSCCR) || \
+ ((REG) == ETH_MMCTGFMSCCR) || ((REG) == ETH_MMCTGFCR) || \
+ ((REG) == ETH_MMCRFCECR) || ((REG) == ETH_MMCRFAECR) || \
+ ((REG) == ETH_MMCRGUFCR))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_Flags
+ * @{
+ */
+#define ETH_MAC_FLAG_TST ((uint32_t)0x00000200) /*!< Time stamp trigger flag (on MAC) */
+#define ETH_MAC_FLAG_MMCT ((uint32_t)0x00000040) /*!< MMC transmit flag */
+#define ETH_MAC_FLAG_MMCR ((uint32_t)0x00000020) /*!< MMC receive flag */
+#define ETH_MAC_FLAG_MMC ((uint32_t)0x00000010) /*!< MMC flag (on MAC) */
+#define ETH_MAC_FLAG_PMT ((uint32_t)0x00000008) /*!< PMT flag (on MAC) */
+#define IS_ETH_MAC_GET_FLAG(FLAG) (((FLAG) == ETH_MAC_FLAG_TST) || ((FLAG) == ETH_MAC_FLAG_MMCT) || \
+ ((FLAG) == ETH_MAC_FLAG_MMCR) || ((FLAG) == ETH_MAC_FLAG_MMC) || \
+ ((FLAG) == ETH_MAC_FLAG_PMT))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Flags
+ * @{
+ */
+#define ETH_DMA_FLAG_TST ((uint32_t)0x20000000) /*!< Time-stamp trigger interrupt (on DMA) */
+#define ETH_DMA_FLAG_PMT ((uint32_t)0x10000000) /*!< PMT interrupt (on DMA) */
+#define ETH_DMA_FLAG_MMC ((uint32_t)0x08000000) /*!< MMC interrupt (on DMA) */
+#define ETH_DMA_FLAG_DATATRANSFERERROR ((uint32_t)0x00800000) /*!< Error bits 0-Rx DMA, 1-Tx DMA */
+#define ETH_DMA_FLAG_READWRITEERROR ((uint32_t)0x01000000) /*!< Error bits 0-write trnsf, 1-read transfr */
+#define ETH_DMA_FLAG_ACCESSERROR ((uint32_t)0x02000000) /*!< Error bits 0-data buffer, 1-desc. access */
+#define ETH_DMA_FLAG_NIS ((uint32_t)0x00010000) /*!< Normal interrupt summary flag */
+#define ETH_DMA_FLAG_AIS ((uint32_t)0x00008000) /*!< Abnormal interrupt summary flag */
+#define ETH_DMA_FLAG_ER ((uint32_t)0x00004000) /*!< Early receive flag */
+#define ETH_DMA_FLAG_FBE ((uint32_t)0x00002000) /*!< Fatal bus error flag */
+#define ETH_DMA_FLAG_ET ((uint32_t)0x00000400) /*!< Early transmit flag */
+#define ETH_DMA_FLAG_RWT ((uint32_t)0x00000200) /*!< Receive watchdog timeout flag */
+#define ETH_DMA_FLAG_RPS ((uint32_t)0x00000100) /*!< Receive process stopped flag */
+#define ETH_DMA_FLAG_RBU ((uint32_t)0x00000080) /*!< Receive buffer unavailable flag */
+#define ETH_DMA_FLAG_R ((uint32_t)0x00000040) /*!< Receive flag */
+#define ETH_DMA_FLAG_TU ((uint32_t)0x00000020) /*!< Underflow flag */
+#define ETH_DMA_FLAG_RO ((uint32_t)0x00000010) /*!< Overflow flag */
+#define ETH_DMA_FLAG_TJT ((uint32_t)0x00000008) /*!< Transmit jabber timeout flag */
+#define ETH_DMA_FLAG_TBU ((uint32_t)0x00000004) /*!< Transmit buffer unavailable flag */
+#define ETH_DMA_FLAG_TPS ((uint32_t)0x00000002) /*!< Transmit process stopped flag */
+#define ETH_DMA_FLAG_T ((uint32_t)0x00000001) /*!< Transmit flag */
+
+#define IS_ETH_DMA_FLAG(FLAG) ((((FLAG) & (uint32_t)0xC7FE1800) == 0x00) && ((FLAG) != 0x00))
+#define IS_ETH_DMA_GET_FLAG(FLAG) (((FLAG) == ETH_DMA_FLAG_TST) || ((FLAG) == ETH_DMA_FLAG_PMT) || \
+ ((FLAG) == ETH_DMA_FLAG_MMC) || ((FLAG) == ETH_DMA_FLAG_DATATRANSFERERROR) || \
+ ((FLAG) == ETH_DMA_FLAG_READWRITEERROR) || ((FLAG) == ETH_DMA_FLAG_ACCESSERROR) || \
+ ((FLAG) == ETH_DMA_FLAG_NIS) || ((FLAG) == ETH_DMA_FLAG_AIS) || \
+ ((FLAG) == ETH_DMA_FLAG_ER) || ((FLAG) == ETH_DMA_FLAG_FBE) || \
+ ((FLAG) == ETH_DMA_FLAG_ET) || ((FLAG) == ETH_DMA_FLAG_RWT) || \
+ ((FLAG) == ETH_DMA_FLAG_RPS) || ((FLAG) == ETH_DMA_FLAG_RBU) || \
+ ((FLAG) == ETH_DMA_FLAG_R) || ((FLAG) == ETH_DMA_FLAG_TU) || \
+ ((FLAG) == ETH_DMA_FLAG_RO) || ((FLAG) == ETH_DMA_FLAG_TJT) || \
+ ((FLAG) == ETH_DMA_FLAG_TBU) || ((FLAG) == ETH_DMA_FLAG_TPS) || \
+ ((FLAG) == ETH_DMA_FLAG_T))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_MAC_Interrupts
+ * @{
+ */
+#define ETH_MAC_IT_TST ((uint32_t)0x00000200) /*!< Time stamp trigger interrupt (on MAC) */
+#define ETH_MAC_IT_MMCT ((uint32_t)0x00000040) /*!< MMC transmit interrupt */
+#define ETH_MAC_IT_MMCR ((uint32_t)0x00000020) /*!< MMC receive interrupt */
+#define ETH_MAC_IT_MMC ((uint32_t)0x00000010) /*!< MMC interrupt (on MAC) */
+#define ETH_MAC_IT_PMT ((uint32_t)0x00000008) /*!< PMT interrupt (on MAC) */
+#define IS_ETH_MAC_IT(IT) ((((IT) & (uint32_t)0xFFFFFDF7) == 0x00) && ((IT) != 0x00))
+#define IS_ETH_MAC_GET_IT(IT) (((IT) == ETH_MAC_IT_TST) || ((IT) == ETH_MAC_IT_MMCT) || \
+ ((IT) == ETH_MAC_IT_MMCR) || ((IT) == ETH_MAC_IT_MMC) || \
+ ((IT) == ETH_MAC_IT_PMT))
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_Interrupts
+ * @{
+ */
+#define ETH_DMA_IT_TST ((uint32_t)0x20000000) /*!< Time-stamp trigger interrupt (on DMA) */
+#define ETH_DMA_IT_PMT ((uint32_t)0x10000000) /*!< PMT interrupt (on DMA) */
+#define ETH_DMA_IT_MMC ((uint32_t)0x08000000) /*!< MMC interrupt (on DMA) */
+#define ETH_DMA_IT_NIS ((uint32_t)0x00010000) /*!< Normal interrupt summary */
+#define ETH_DMA_IT_AIS ((uint32_t)0x00008000) /*!< Abnormal interrupt summary */
+#define ETH_DMA_IT_ER ((uint32_t)0x00004000) /*!< Early receive interrupt */
+#define ETH_DMA_IT_FBE ((uint32_t)0x00002000) /*!< Fatal bus error interrupt */
+#define ETH_DMA_IT_ET ((uint32_t)0x00000400) /*!< Early transmit interrupt */
+#define ETH_DMA_IT_RWT ((uint32_t)0x00000200) /*!< Receive watchdog timeout interrupt */
+#define ETH_DMA_IT_RPS ((uint32_t)0x00000100) /*!< Receive process stopped interrupt */
+#define ETH_DMA_IT_RBU ((uint32_t)0x00000080) /*!< Receive buffer unavailable interrupt */
+#define ETH_DMA_IT_R ((uint32_t)0x00000040) /*!< Receive interrupt */
+#define ETH_DMA_IT_TU ((uint32_t)0x00000020) /*!< Underflow interrupt */
+#define ETH_DMA_IT_RO ((uint32_t)0x00000010) /*!< Overflow interrupt */
+#define ETH_DMA_IT_TJT ((uint32_t)0x00000008) /*!< Transmit jabber timeout interrupt */
+#define ETH_DMA_IT_TBU ((uint32_t)0x00000004) /*!< Transmit buffer unavailable interrupt */
+#define ETH_DMA_IT_TPS ((uint32_t)0x00000002) /*!< Transmit process stopped interrupt */
+#define ETH_DMA_IT_T ((uint32_t)0x00000001) /*!< Transmit interrupt */
+
+#define IS_ETH_DMA_IT(IT) ((((IT) & (uint32_t)0xC7FE1800) == 0x00) && ((IT) != 0x00))
+#define IS_ETH_DMA_GET_IT(IT) (((IT) == ETH_DMA_IT_TST) || ((IT) == ETH_DMA_IT_PMT) || \
+ ((IT) == ETH_DMA_IT_MMC) || ((IT) == ETH_DMA_IT_NIS) || \
+ ((IT) == ETH_DMA_IT_AIS) || ((IT) == ETH_DMA_IT_ER) || \
+ ((IT) == ETH_DMA_IT_FBE) || ((IT) == ETH_DMA_IT_ET) || \
+ ((IT) == ETH_DMA_IT_RWT) || ((IT) == ETH_DMA_IT_RPS) || \
+ ((IT) == ETH_DMA_IT_RBU) || ((IT) == ETH_DMA_IT_R) || \
+ ((IT) == ETH_DMA_IT_TU) || ((IT) == ETH_DMA_IT_RO) || \
+ ((IT) == ETH_DMA_IT_TJT) || ((IT) == ETH_DMA_IT_TBU) || \
+ ((IT) == ETH_DMA_IT_TPS) || ((IT) == ETH_DMA_IT_T))
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_transmit_process_state_
+ * @{
+ */
+#define ETH_DMA_TRANSMITPROCESS_STOPPED ((uint32_t)0x00000000) /*!< Stopped - Reset or Stop Tx Command issued */
+#define ETH_DMA_TRANSMITPROCESS_FETCHING ((uint32_t)0x00100000) /*!< Running - fetching the Tx descriptor */
+#define ETH_DMA_TRANSMITPROCESS_WAITING ((uint32_t)0x00200000) /*!< Running - waiting for status */
+#define ETH_DMA_TRANSMITPROCESS_READING ((uint32_t)0x00300000) /*!< Running - reading the data from host memory */
+#define ETH_DMA_TRANSMITPROCESS_SUSPENDED ((uint32_t)0x00600000) /*!< Suspended - Tx Descriptor unavailable */
+#define ETH_DMA_TRANSMITPROCESS_CLOSING ((uint32_t)0x00700000) /*!< Running - closing Rx descriptor */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup ETH_DMA_receive_process_state_
+ * @{
+ */
+#define ETH_DMA_RECEIVEPROCESS_STOPPED ((uint32_t)0x00000000) /*!< Stopped - Reset or Stop Rx Command issued */
+#define ETH_DMA_RECEIVEPROCESS_FETCHING ((uint32_t)0x00020000) /*!< Running - fetching the Rx descriptor */
+#define ETH_DMA_RECEIVEPROCESS_WAITING ((uint32_t)0x00060000) /*!< Running - waiting for packet */
+#define ETH_DMA_RECEIVEPROCESS_SUSPENDED ((uint32_t)0x00080000) /*!< Suspended - Rx Descriptor unavailable */
+#define ETH_DMA_RECEIVEPROCESS_CLOSING ((uint32_t)0x000A0000) /*!< Running - closing descriptor */
+#define ETH_DMA_RECEIVEPROCESS_QUEUING ((uint32_t)0x000E0000) /*!< Running - queuing the receive frame into host memory */
+
+/**
+ * @}
+ */
+
+/** @defgroup ETH_DMA_overflow_
+ * @{
+ */
+#define ETH_DMA_OVERFLOW_RXFIFOCOUNTER ((uint32_t)0x10000000) /*!< Overflow bit for FIFO overflow counter */
+#define ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER ((uint32_t)0x00010000) /*!< Overflow bit for missed frame counter */
+#define IS_ETH_DMA_GET_OVERFLOW(OVERFLOW) (((OVERFLOW) == ETH_DMA_OVERFLOW_RXFIFOCOUNTER) || \
+ ((OVERFLOW) == ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER))
+/**
+ * @}
+ */
+
+/* ETHERNET MAC address offsets */
+#define ETH_MAC_ADDR_HBASE (uint32_t)(ETH_MAC_BASE + (uint32_t)0x40) /* ETHERNET MAC address high offset */
+#define ETH_MAC_ADDR_LBASE (uint32_t)(ETH_MAC_BASE + (uint32_t)0x44) /* ETHERNET MAC address low offset */
+
+/* ETHERNET MACMIIAR register Mask */
+#define MACMIIAR_CR_MASK ((uint32_t)0xFFFFFFE3)
+
+/* ETHERNET MACCR register Mask */
+#define MACCR_CLEAR_MASK ((uint32_t)0xFF20810F)
+
+/* ETHERNET MACFCR register Mask */
+#define MACFCR_CLEAR_MASK ((uint32_t)0x0000FF41)
+
+
+/* ETHERNET DMAOMR register Mask */
+#define DMAOMR_CLEAR_MASK ((uint32_t)0xF8DE3F23)
+
+
+/* ETHERNET Remote Wake-up frame register length */
+#define ETH_WAKEUP_REGISTER_LENGTH 8
+
+/* ETHERNET Missed frames counter Shift */
+#define ETH_DMA_RX_OVERFLOW_MISSEDFRAMES_COUNTERSHIFT 17
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset ETH handle state
+ * @param __HANDLE__: specifies the ETH handle.
+ * @retval None
+ */
+#define __HAL_ETH_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_ETH_STATE_RESET)
+
+/**
+ * @brief Checks whether the specified ETHERNET DMA Tx Desc flag is set or not.
+ * @param __HANDLE__: ETH Handle
+ * @param __FLAG__: specifies the flag to check.
+ * @retval the ETH_DMATxDescFlag (SET or RESET).
+ */
+#define __HAL_ETH_DMATXDESC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->TxDesc->Status & (__FLAG__) == (__FLAG__))
+
+/**
+ * @brief Checks whether the specified ETHERNET DMA Rx Desc flag is set or not.
+ * @param __HANDLE__: ETH Handle
+ * @param __FLAG__: specifies the flag to check.
+ * @retval the ETH_DMATxDescFlag (SET or RESET).
+ */
+#define __HAL_ETH_DMARXDESC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->RxDesc->Status & (__FLAG__) == (__FLAG__))
+
+/**
+ * @brief Enables the specified DMA Rx Desc receive interrupt.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMARXDESC_ENABLE_IT(__HANDLE__) ((__HANDLE__)->RxDesc->ControlBufferSize &=(~(uint32_t)ETH_DMARXDESC_DIC))
+
+/**
+ * @brief Disables the specified DMA Rx Desc receive interrupt.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMARXDESC_DISABLE_IT(__HANDLE__) ((__HANDLE__)->RxDesc->ControlBufferSize |= ETH_DMARXDESC_DIC)
+
+/**
+ * @brief Set the specified DMA Rx Desc Own bit.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMARXDESC_SET_OWN_BIT(__HANDLE__) ((__HANDLE__)->RxDesc->Status |= ETH_DMARXDESC_OWN)
+
+/**
+ * @brief Returns the specified ETHERNET DMA Tx Desc collision count.
+ * @param __HANDLE__: ETH Handle
+ * @retval The Transmit descriptor collision counter value.
+ */
+#define __HAL_ETH_DMATXDESC_GET_COLLISION_COUNT(__HANDLE__) (((__HANDLE__)->TxDesc->Status & ETH_DMATXDESC_CC) >> ETH_DMATXDESC_COLLISION_COUNTSHIFT)
+
+/**
+ * @brief Set the specified DMA Tx Desc Own bit.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_SET_OWN_BIT(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_OWN)
+
+/**
+ * @brief Enables the specified DMA Tx Desc Transmit interrupt.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_ENABLE_IT(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_IC)
+
+/**
+ * @brief Disables the specified DMA Tx Desc Transmit interrupt.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_DISABLE_IT(__HANDLE__) ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_IC)
+
+/**
+ * @brief Selects the specified ETHERNET DMA Tx Desc Checksum Insertion.
+ * @param __HANDLE__: ETH Handle
+ * @param __CHECKSUM__: specifies is the DMA Tx desc checksum insertion.
+ * This parameter can be one of the following values:
+ * @arg ETH_DMATXDESC_CHECKSUMBYPASS : Checksum bypass
+ * @arg ETH_DMATXDESC_CHECKSUMIPV4HEADER : IPv4 header checksum
+ * @arg ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT : TCP/UDP/ICMP checksum. Pseudo header checksum is assumed to be present
+ * @arg ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL : TCP/UDP/ICMP checksum fully in hardware including pseudo header
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_CHECKSUM_INSERTION(__HANDLE__, __CHECKSUM__) ((__HANDLE__)->TxDesc->Status |= (__CHECKSUM__))
+
+/**
+ * @brief Enables the DMA Tx Desc CRC.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_CRC_ENABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_DC)
+
+/**
+ * @brief Disables the DMA Tx Desc CRC.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_CRC_DISABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_DC)
+
+/**
+ * @brief Enables the DMA Tx Desc padding for frame shorter than 64 bytes.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_SHORT_FRAME_PADDING_ENABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_DP)
+
+/**
+ * @brief Disables the DMA Tx Desc padding for frame shorter than 64 bytes.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_DMATXDESC_SHORT_FRAME_PADDING_DISABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_DP)
+
+/**
+ * @brief Enables the specified ETHERNET MAC interrupts.
+ * @param __HANDLE__ : ETH Handle
+ * @param __INTERRUPT__: specifies the ETHERNET MAC interrupt sources to be
+ * enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg ETH_MAC_IT_TST : Time stamp trigger interrupt
+ * @arg ETH_MAC_IT_PMT : PMT interrupt
+ * @retval None
+ */
+#define __HAL_ETH_MAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MACIMR |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified ETHERNET MAC interrupts.
+ * @param __HANDLE__ : ETH Handle
+ * @param __INTERRUPT__: specifies the ETHERNET MAC interrupt sources to be
+ * enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg ETH_MAC_IT_TST : Time stamp trigger interrupt
+ * @arg ETH_MAC_IT_PMT : PMT interrupt
+ * @retval None
+ */
+#define __HAL_ETH_MAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MACIMR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Initiate a Pause Control Frame (Full-duplex only).
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_INITIATE_PAUSE_CONTROL_FRAME(__HANDLE__) ((__HANDLE__)->Instance->MACFCR |= ETH_MACFCR_FCBBPA)
+
+/**
+ * @brief Checks whether the ETHERNET flow control busy bit is set or not.
+ * @param __HANDLE__: ETH Handle
+ * @retval The new state of flow control busy status bit (SET or RESET).
+ */
+#define __HAL_ETH_GET_FLOW_CONTROL_BUSY_STATUS(__HANDLE__) (((__HANDLE__)->Instance->MACFCR & ETH_MACFCR_FCBBPA) == ETH_MACFCR_FCBBPA)
+
+/**
+ * @brief Enables the MAC Back Pressure operation activation (Half-duplex only).
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_BACK_PRESSURE_ACTIVATION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACFCR |= ETH_MACFCR_FCBBPA)
+
+/**
+ * @brief Disables the MAC BackPressure operation activation (Half-duplex only).
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_BACK_PRESSURE_ACTIVATION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACFCR &= ~ETH_MACFCR_FCBBPA)
+
+/**
+ * @brief Checks whether the specified ETHERNET MAC flag is set or not.
+ * @param __HANDLE__: ETH Handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg ETH_MAC_FLAG_TST : Time stamp trigger flag
+ * @arg ETH_MAC_FLAG_MMCT : MMC transmit flag
+ * @arg ETH_MAC_FLAG_MMCR : MMC receive flag
+ * @arg ETH_MAC_FLAG_MMC : MMC flag
+ * @arg ETH_MAC_FLAG_PMT : PMT flag
+ * @retval The state of ETHERNET MAC flag.
+ */
+#define __HAL_ETH_MAC_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->MACSR &( __FLAG__)) == ( __FLAG__))
+
+/**
+ * @brief Enables the specified ETHERNET DMA interrupts.
+ * @param __HANDLE__ : ETH Handle
+ * @param __INTERRUPT__: specifies the ETHERNET DMA interrupt sources to be
+ * enabled @defgroup ETH_DMA_Interrupts
+ * @retval None
+ */
+#define __HAL_ETH_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMAIER |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified ETHERNET DMA interrupts.
+ * @param __HANDLE__ : ETH Handle
+ * @param __INTERRUPT__: specifies the ETHERNET DMA interrupt sources to be
+ * disabled. @defgroup ETH_DMA_Interrupts
+ * @retval None
+ */
+#define __HAL_ETH_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMAIER &= ~(__INTERRUPT__))
+
+/**
+ * @brief Clears the ETHERNET DMA IT pending bit.
+ * @param __HANDLE__ : ETH Handle
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear. @defgroup ETH_DMA_Interrupts
+ * @retval None
+ */
+#define __HAL_ETH_DMA_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMASR =(__INTERRUPT__))
+
+/**
+ * @brief Checks whether the specified ETHERNET DMA flag is set or not.
+* @param __HANDLE__: ETH Handle
+ * @param __FLAG__: specifies the flag to check. @defgroup ETH_DMA_Flags
+ * @retval The new state of ETH_DMA_FLAG (SET or RESET).
+ */
+#define __HAL_ETH_DMA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->DMASR &( __FLAG__)) == ( __FLAG__))
+
+/**
+ * @brief Checks whether the specified ETHERNET DMA flag is set or not.
+ * @param __HANDLE__: ETH Handle
+ * @param __FLAG__: specifies the flag to clear. @defgroup ETH_DMA_Flags
+ * @retval The new state of ETH_DMA_FLAG (SET or RESET).
+ */
+#define __HAL_ETH_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->DMASR = (__FLAG__))
+
+/**
+ * @brief Checks whether the specified ETHERNET DMA overflow flag is set or not.
+ * @param __HANDLE__: ETH Handle
+ * @param __OVERFLOW__: specifies the DMA overflow flag to check.
+ * This parameter can be one of the following values:
+ * @arg ETH_DMA_OVERFLOW_RXFIFOCOUNTER : Overflow for FIFO Overflows Counter
+ * @arg ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER : Overflow for Buffer Unavailable Missed Frame Counter
+ * @retval The state of ETHERNET DMA overflow Flag (SET or RESET).
+ */
+#define __HAL_ETH_GET_DMA_OVERFLOW_STATUS(__HANDLE__, __OVERFLOW__) (((__HANDLE__)->Instance->DMAMFBOCR & (__OVERFLOW__)) == (__OVERFLOW__))
+
+/**
+ * @brief Set the DMA Receive status watchdog timer register value
+ * @param __HANDLE__: ETH Handle
+ * @param __VALUE__: DMA Receive status watchdog timer register value
+ * @retval None
+ */
+#define __HAL_ETH_SET_RECEIVE_WATCHDOG_TIMER(__HANDLE__, __VALUE__) ((__HANDLE__)->Instance->DMARSWTR = (__VALUE__))
+
+/**
+ * @brief Enables any unicast packet filtered by the MAC address
+ * recognition to be a wake-up frame.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_GLOBAL_UNICAST_WAKEUP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_GU)
+
+/**
+ * @brief Disables any unicast packet filtered by the MAC address
+ * recognition to be a wake-up frame.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_GLOBAL_UNICAST_WAKEUP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_GU)
+
+/**
+ * @brief Enables the MAC Wake-Up Frame Detection.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_FRAME_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_WFE)
+
+/**
+ * @brief Disables the MAC Wake-Up Frame Detection.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_WAKEUP_FRAME_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_WFE)
+
+/**
+ * @brief Enables the MAC Magic Packet Detection.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MAGIC_PACKET_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_MPE)
+
+/**
+ * @brief Disables the MAC Magic Packet Detection.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MAGIC_PACKET_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_WFE)
+
+/**
+ * @brief Enables the MAC Power Down.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_POWER_DOWN_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_PD)
+
+/**
+ * @brief Disables the MAC Power Down.
+ * @param __HANDLE__: ETH Handle
+ * @retval None
+ */
+#define __HAL_ETH_POWER_DOWN_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_PD)
+
+/**
+ * @brief Checks whether the specified ETHERNET PMT flag is set or not.
+ * @param __HANDLE__: ETH Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg ETH_PMT_FLAG_WUFFRPR : Wake-Up Frame Filter Register Pointer Reset
+ * @arg ETH_PMT_FLAG_WUFR : Wake-Up Frame Received
+ * @arg ETH_PMT_FLAG_MPR : Magic Packet Received
+ * @retval The new state of ETHERNET PMT Flag (SET or RESET).
+ */
+#define __HAL_ETH_GET_PMT_FLAG_STATUS(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->MACPMTCSR &( __FLAG__)) == ( __FLAG__))
+
+/**
+ * @brief Preset and Initialize the MMC counters to almost-full value: 0xFFFF_FFF0 (full - 16)
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTER_FULL_PRESET(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= (ETH_MMCCR_MCFHP | ETH_MMCCR_MCP))
+
+/**
+ * @brief Preset and Initialize the MMC counters to almost-half value: 0x7FFF_FFF0 (half - 16)
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTER_HALF_PRESET(__HANDLE__) do{(__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_MCFHP;\
+ (__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_MCP;} while (0)
+
+/**
+ * @brief Enables the MMC Counter Freeze.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTER_FREEZE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_MCF)
+
+/**
+ * @brief Disables the MMC Counter Freeze.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTER_FREEZE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_MCF)
+
+/**
+ * @brief Enables the MMC Reset On Read.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_ETH_MMC_RESET_ONREAD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_ROR)
+
+/**
+ * @brief Disables the MMC Reset On Read.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_ETH_MMC_RESET_ONREAD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_ROR)
+
+/**
+ * @brief Enables the MMC Counter Stop Rollover.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_ETH_MMC_COUNTER_ROLLOVER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_CSR)
+
+/**
+ * @brief Disables the MMC Counter Stop Rollover.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_ETH_MMC_COUNTER_ROLLOVER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_CSR)
+
+/**
+ * @brief Resets the MMC Counters.
+ * @param __HANDLE__: ETH Handle.
+ * @retval None
+ */
+#define __HAL_ETH_MMC_COUNTERS_RESET(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_CR)
+
+/**
+ * @brief Enables the specified ETHERNET MMC Rx interrupts.
+ * @param __HANDLE__: ETH Handle.
+ * @param __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg ETH_MMC_IT_RGUF : When Rx good unicast frames counter reaches half the maximum value
+ * @arg ETH_MMC_IT_RFAE : When Rx alignment error counter reaches half the maximum value
+ * @arg ETH_MMC_IT_RFCE : When Rx crc error counter reaches half the maximum value
+ * @retval None
+ */
+#define __HAL_ETH_MMC_RX_IT_ENABLE(__HANDLE__, __INTERRUPT__) (__HANDLE__)->Instance->MMCRIMR &= ~((__INTERRUPT__) & 0xEFFFFFFF)
+/**
+ * @brief Disables the specified ETHERNET MMC Rx interrupts.
+ * @param __HANDLE__: ETH Handle.
+ * @param __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg ETH_MMC_IT_RGUF : When Rx good unicast frames counter reaches half the maximum value
+ * @arg ETH_MMC_IT_RFAE : When Rx alignment error counter reaches half the maximum value
+ * @arg ETH_MMC_IT_RFCE : When Rx crc error counter reaches half the maximum value
+ * @retval None
+ */
+#define __HAL_ETH_MMC_RX_IT_DISABLE(__HANDLE__, __INTERRUPT__) (__HANDLE__)->Instance->MMCRIMR |= ((__INTERRUPT__) & 0xEFFFFFFF)
+/**
+ * @brief Enables the specified ETHERNET MMC Tx interrupts.
+ * @param __HANDLE__: ETH Handle.
+ * @param __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg ETH_MMC_IT_TGF : When Tx good frame counter reaches half the maximum value
+ * @arg ETH_MMC_IT_TGFMSC: When Tx good multi col counter reaches half the maximum value
+ * @arg ETH_MMC_IT_TGFSC : When Tx good single col counter reaches half the maximum value
+ * @retval None
+ */
+#define __HAL_ETH_MMC_TX_IT_ENABLE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MMCRIMR &= ~ (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified ETHERNET MMC Tx interrupts.
+ * @param __HANDLE__: ETH Handle.
+ * @param __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled.
+ * This parameter can be one of the following values:
+ * @arg ETH_MMC_IT_TGF : When Tx good frame counter reaches half the maximum value
+ * @arg ETH_MMC_IT_TGFMSC: When Tx good multi col counter reaches half the maximum value
+ * @arg ETH_MMC_IT_TGFSC : When Tx good single col counter reaches half the maximum value
+ * @retval None
+ */
+#define __HAL_ETH_MMC_TX_IT_DISABLE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MMCRIMR |= (__INTERRUPT__))
+
+/** @defgroup ETH_EXTI_LINE_WAKEUP
+ * @{
+ */
+#define ETH_EXTI_LINE_WAKEUP ((uint32_t)0x00080000) /*!< External interrupt line 19 Connected to the ETH EXTI Line */
+
+/**
+ * @}
+ */
+
+/**
+ * @brief Enables the ETH External interrupt line.
+ * @param None
+ * @retval None
+ */
+#define __HAL_ETH_EXTI_ENABLE_IT() EXTI->IMR |= (ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Disables the ETH External interrupt line.
+ * @param None
+ * @retval None
+ */
+#define __HAL_ETH_EXTI_DISABLE_IT() EXTI->IMR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Get flag of the ETH External interrupt line.
+ * @param None
+ * @retval None
+ */
+#define __HAL_ETH_EXTI_GET_FLAG() EXTI->PR & (ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Clear flag of the ETH External interrupt line.
+ * @param None
+ * @retval None
+ */
+#define __HAL_ETH_EXTI_CLEAR_FLAG() EXTI->PR = (ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Sets rising edge trigger to the ETH External interrupt line.
+ * @param None
+ * @retval None
+ */
+#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER() EXTI->FTSR &= ~(ETH_EXTI_LINE_WAKEUP);\
+ EXTI->RTSR |= ETH_EXTI_LINE_WAKEUP
+
+/**
+ * @brief Sets falling edge trigger to the ETH External interrupt line.
+ * @param None
+ * @retval None
+ */
+#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER() EXTI->FTSR |= (ETH_EXTI_LINE_WAKEUP);\
+ EXTI->RTSR &= ~(ETH_EXTI_LINE_WAKEUP)
+
+/**
+ * @brief Sets rising/falling edge trigger to the ETH External interrupt line.
+ * @param None
+ * @retval None
+ */
+#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER() EXTI->RTSR &= ~(ETH_EXTI_LINE_WAKEUP);\
+ EXTI->FTSR &= ~(ETH_EXTI_LINE_WAKEUP);\
+ EXTI->RTSR |= ETH_EXTI_LINE_WAKEUP;\
+ EXTI->FTSR |= ETH_EXTI_LINE_WAKEUP
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth);
+void HAL_ETH_MspInit(ETH_HandleTypeDef *heth);
+void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_DMATxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMATxDescTab, uint8_t* TxBuff, uint32_t TxBuffCount);
+HAL_StatusTypeDef HAL_ETH_DMARxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMARxDescTab, uint8_t *RxBuff, uint32_t RxBuffCount);
+
+/* IO operation functions ****************************************************/
+HAL_StatusTypeDef HAL_ETH_TransmitFrame(ETH_HandleTypeDef *heth, uint32_t FrameLength);
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame(ETH_HandleTypeDef *heth);
+
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_ETH_GetReceivedFrame_IT(ETH_HandleTypeDef *heth);
+void HAL_ETH_IRQHandler(ETH_HandleTypeDef *heth);
+
+ /* Callback in non blocking modes (Interrupt) */
+void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth);
+void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth);
+void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth);
+
+/* Cmmunication with PHY functions*/
+HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t *RegValue);
+HAL_StatusTypeDef HAL_ETH_WritePHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t RegValue);
+
+/* Peripheral Control functions **********************************************/
+HAL_StatusTypeDef HAL_ETH_Start(ETH_HandleTypeDef *heth);
+HAL_StatusTypeDef HAL_ETH_Stop(ETH_HandleTypeDef *heth);
+
+HAL_StatusTypeDef HAL_ETH_ConfigMAC(ETH_HandleTypeDef *heth, ETH_MACInitTypeDef *macconf);
+HAL_StatusTypeDef HAL_ETH_ConfigDMA(ETH_HandleTypeDef *heth, ETH_DMAInitTypeDef *dmaconf);
+
+/* Peripheral State functions ************************************************/
+HAL_ETH_StateTypeDef HAL_ETH_GetState(ETH_HandleTypeDef *heth);
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_ETH_H */
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_flash.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,363 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_flash.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of FLASH HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_FLASH_H
+#define __STM32F4xx_HAL_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASH
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/**
+ * @brief FLASH Error structure definition
+ */
+typedef enum
+{
+ FLASH_ERROR_RD = 0x01,
+ FLASH_ERROR_PGS = 0x02,
+ FLASH_ERROR_PGP = 0x04,
+ FLASH_ERROR_PGA = 0x08,
+ FLASH_ERROR_WRP = 0x10,
+ FLASH_ERROR_OPERATION = 0x20
+}FLASH_ErrorTypeDef;
+
+/**
+ * @brief FLASH Procedure structure definition
+ */
+typedef enum
+{
+ FLASH_PROC_NONE = 0,
+ FLASH_PROC_SECTERASE,
+ FLASH_PROC_MASSERASE,
+ FLASH_PROC_PROGRAM
+} FLASH_ProcedureTypeDef;
+
+
+/**
+ * @brief FLASH handle Structure definition
+ */
+typedef struct
+{
+ __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*Internal variable to indicate which procedure is ongoing or not in IT context*/
+
+ __IO uint32_t NbSectorsToErase; /*Internal variable to save the remaining sectors to erase in IT context*/
+
+ __IO uint8_t VoltageForErase; /*Internal variable to provide voltange range selected by user in IT context*/
+
+ __IO uint32_t Sector; /*Internal variable to define the current sector which is erasing*/
+
+ __IO uint32_t Bank; /*Internal variable to save current bank selected during mass erase*/
+
+ __IO uint32_t Address; /*Internal variable to save address selected for program*/
+
+ HAL_LockTypeDef Lock; /* FLASH locking object */
+
+ __IO FLASH_ErrorTypeDef ErrorCode; /* FLASH error code */
+
+}FLASH_ProcessTypeDef;
+
+/**
+ * @brief FLASH Error source
+ */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
+ * @{
+ */
+
+
+
+/** @defgroup FLASH_Type_Program FLASH Type Program
+ * @{
+ */
+#define TYPEPROGRAM_BYTE ((uint32_t)0x00) /*!< Program byte (8-bit) at a specified address */
+#define TYPEPROGRAM_HALFWORD ((uint32_t)0x01) /*!< Program a half-word (16-bit) at a specified address */
+#define TYPEPROGRAM_WORD ((uint32_t)0x02) /*!< Program a word (32-bit) at a specified address */
+#define TYPEPROGRAM_DOUBLEWORD ((uint32_t)0x03) /*!< Program a double word (64-bit) at a specified address */
+
+#define IS_TYPEPROGRAM(VALUE)(((VALUE) == TYPEPROGRAM_BYTE) || \
+ ((VALUE) == TYPEPROGRAM_HALFWORD) || \
+ ((VALUE) == TYPEPROGRAM_WORD) || \
+ ((VALUE) == TYPEPROGRAM_DOUBLEWORD))
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Flag_definition FLASH Flag definition
+ * @brief Flag definition
+ * @{
+ */
+#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */
+#define FLASH_FLAG_OPERR FLASH_SR_SOP /*!< FLASH operation Error flag */
+#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */
+#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */
+#define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */
+#define FLASH_FLAG_PGSERR FLASH_SR_PGSERR /*!< FLASH Programming Sequence error flag */
+#define FLASH_FLAG_RDERR ((uint32_t)0x00000100) /*!< Read Protection error flag (PCROP) */
+#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
+ * @brief FLASH Interrupt definition
+ * @{
+ */
+#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
+#define FLASH_IT_ERR ((uint32_t)0x02000000) /*!< Error Interrupt source */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism
+ * @{
+ */
+#define FLASH_PSIZE_BYTE ((uint32_t)0x00000000)
+#define FLASH_PSIZE_HALF_WORD ((uint32_t)0x00000100)
+#define FLASH_PSIZE_WORD ((uint32_t)0x00000200)
+#define FLASH_PSIZE_DOUBLE_WORD ((uint32_t)0x00000300)
+#define CR_PSIZE_MASK ((uint32_t)0xFFFFFCFF)
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Keys FLASH Keys
+ * @{
+ */
+#define RDP_KEY ((uint16_t)0x00A5)
+#define FLASH_KEY1 ((uint32_t)0x45670123)
+#define FLASH_KEY2 ((uint32_t)0xCDEF89AB)
+#define FLASH_OPT_KEY1 ((uint32_t)0x08192A3B)
+#define FLASH_OPT_KEY2 ((uint32_t)0x4C5D6E7F)
+/**
+ * @}
+ */
+
+/**
+ * @brief ACR register byte 0 (Bits[7:0]) base address
+ */
+#define ACR_BYTE0_ADDRESS ((uint32_t)0x40023C00)
+/**
+ * @brief OPTCR register byte 0 (Bits[7:0]) base address
+ */
+#define OPTCR_BYTE0_ADDRESS ((uint32_t)0x40023C14)
+/**
+ * @brief OPTCR register byte 1 (Bits[15:8]) base address
+ */
+#define OPTCR_BYTE1_ADDRESS ((uint32_t)0x40023C15)
+/**
+ * @brief OPTCR register byte 2 (Bits[23:16]) base address
+ */
+#define OPTCR_BYTE2_ADDRESS ((uint32_t)0x40023C16)
+/**
+ * @brief OPTCR register byte 3 (Bits[31:24]) base address
+ */
+#define OPTCR_BYTE3_ADDRESS ((uint32_t)0x40023C17)
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/**
+ * @brief Set the FLASH Latency.
+ * @param __LATENCY__: FLASH Latency
+ * The value of this parameter depend on device used within the same series
+ * @retval none
+ */
+#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (*(__IO uint8_t *)ACR_BYTE0_ADDRESS = (uint8_t)(__LATENCY__))
+
+/**
+ * @brief Enable the FLASH prefetch buffer.
+ * @retval none
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN)
+
+/**
+ * @brief Disable the FLASH prefetch buffer.
+ * @retval none
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN))
+
+/**
+ * @brief Enable the FLASH instruction cache.
+ * @retval none
+ */
+#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_ICEN)
+
+/**
+ * @brief Disable the FLASH instruction cache.
+ * @retval none
+ */
+#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_ICEN))
+
+/**
+ * @brief Enable the FLASH data cache.
+ * @retval none
+ */
+#define __HAL_FLASH_DATA_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_DCEN)
+
+/**
+ * @brief Disable the FLASH data cache.
+ * @retval none
+ */
+#define __HAL_FLASH_DATA_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_DCEN))
+
+/**
+ * @brief Resets the FLASH instruction Cache.
+ * @note This function must be used only when the Instruction Cache is disabled.
+ * @retval None
+ */
+#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() (FLASH->ACR |= FLASH_ACR_ICRST)
+
+/**
+ * @brief Resets the FLASH data Cache.
+ * @note This function must be used only when the data Cache is disabled.
+ * @retval None
+ */
+#define __HAL_FLASH_DATA_CACHE_RESET() (FLASH->ACR |= FLASH_ACR_DCRST)
+
+/**
+ * @brief Enable the specified FLASH interrupt.
+ * @param __INTERRUPT__ : FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+ * @arg FLASH_IT_ERR: Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified FLASH interrupt.
+ * @param __INTERRUPT__ : FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+ * @arg FLASH_IT_ERR: Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
+
+/**
+ * @brief Get the specified FLASH flag status.
+ * @param __FLAG__: specifies the FLASH flag to check.
+ * This parameter can be one of the following values:
+ * @arg FLASH_FLAG_EOP : FLASH End of Operation flag
+ * @arg FLASH_FLAG_OPERR : FLASH operation Error flag
+ * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
+ * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
+ * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
+ * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP)
+ * @arg FLASH_FLAG_BSY : FLASH Busy flag
+ * @retval The new state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__)))
+
+/**
+ * @brief Clear the specified FLASH flag.
+ * @param __FLAG__: specifies the FLASH flags to clear.
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_FLAG_EOP : FLASH End of Operation flag
+ * @arg FLASH_FLAG_OPERR : FLASH operation Error flag
+ * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag
+ * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag
+ * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag
+ * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP)
+ * @retval none
+ */
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__))
+
+/* Include FLASH HAL Extension module */
+#include "stm32f4xx_hal_flash_ex.h"
+#include "stm32f4xx_hal_flash_ramfunc.h"
+
+/* Exported functions --------------------------------------------------------*/
+/* Program operation functions ***********************************************/
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+/* FLASH IRQ handler method */
+void HAL_FLASH_IRQHandler(void);
+/* Callbacks in non blocking modes */
+void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
+void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
+
+/* Peripheral Control functions **********************************************/
+HAL_StatusTypeDef HAL_FLASH_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
+/* Option bytes control */
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
+
+/* Peripheral State functions ************************************************/
+FLASH_ErrorTypeDef HAL_FLASH_GetError(void);
+
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_FLASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_flash_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,759 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_flash_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of FLASH HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_FLASH_EX_H
+#define __STM32F4xx_HAL_FLASH_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASHEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief FLASH Erase structure definition
+ */
+typedef struct
+{
+ uint32_t TypeErase; /*!< Mass erase or sector Erase.
+ This parameter can be a value of @ref FLASHEx_Type_Erase */
+
+ uint32_t Banks; /*!< Select banks to erase when Mass erase is enabled.
+ This parameter must be a value of @ref FLASHEx_Banks */
+
+ uint32_t Sector; /*!< Initial FLASH sector to erase when Mass erase is disabled
+ This parameter must be a value of @ref FLASHEx_Sectors */
+
+ uint32_t NbSectors; /*!< Number of sectors to be erased.
+ This parameter must be a value between 1 and (max number of sectors - value of Initial sector)*/
+
+ uint32_t VoltageRange;/*!< The device voltage range which defines the erase parallelism
+ This parameter must be a value of @ref FLASHEx_Voltage_Range */
+
+} FLASH_EraseInitTypeDef;
+
+/**
+ * @brief FLASH Option Bytes Program structure definition
+ */
+typedef struct
+{
+ uint32_t OptionType; /*!< Option byte to be configured.
+ This parameter can be a value of @ref FLASHEx_Option_Type */
+
+ uint32_t WRPState; /*!< Write protection activation or deactivation.
+ This parameter can be a value of @ref FLASHEx_WRP_State */
+
+ uint32_t WRPSector; /*!< Specifies the sector(s) to be write protected.
+ The value of this parameter depend on device used within the same series */
+
+ uint32_t Banks; /*!< Select banks for WRP activation/deactivation of all sectors.
+ This parameter must be a value of @ref FLASHEx_Banks */
+
+ uint32_t RDPLevel; /*!< Set the read protection level.
+ This parameter can be a value of @ref FLASHEx_Option_Bytes_Read_Protection */
+
+ uint32_t BORLevel; /*!< Set the BOR Level.
+ This parameter can be a value of @ref FLASHEx_BOR_Reset_Level */
+
+ uint8_t USERConfig; /*!< Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. */
+
+} FLASH_OBProgramInitTypeDef;
+
+/**
+ * @brief FLASH Advanced Option Bytes Program structure definition
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+typedef struct
+{
+ uint32_t OptionType; /*!< Option byte to be configured for extension.
+ This parameter can be a value of @ref FLASHEx_Advanced_Option_Type */
+
+ uint32_t PCROPState; /*!< PCROP activation or deactivation.
+ This parameter can be a value of @ref FLASHEx_PCROP_State */
+
+#if defined (STM32F401xC) || defined (STM32F401xE) || defined (STM32F411xE)
+ uint16_t Sectors; /*!< specifies the sector(s) set for PCROP.
+ This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+ uint32_t Banks; /*!< Select banks for PCROP activation/deactivation of all sectors.
+ This parameter must be a value of @ref FLASHEx_Banks */
+
+ uint16_t SectorsBank1; /*!< Specifies the sector(s) set for PCROP for Bank1.
+ This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */
+
+ uint16_t SectorsBank2; /*!< Specifies the sector(s) set for PCROP for Bank2.
+ This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */
+
+ uint8_t BootConfig; /*!< Specifies Option bytes for boot config.
+ This parameter can be a value of @ref FLASHEx_Dual_Boot */
+
+#endif /*STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+} FLASH_AdvOBProgramInitTypeDef;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup FLASHEx_Exported_Constants FLASH Exported Constants
+ * @{
+ */
+
+/** @defgroup FLASHEx_Type_Erase FLASH Type Erase
+ * @{
+ */
+#define TYPEERASE_SECTORS ((uint32_t)0x00) /*!< Sectors erase only */
+#define TYPEERASE_MASSERASE ((uint32_t)0x01) /*!< Flash Mass erase activation */
+
+#define IS_TYPEERASE(VALUE)(((VALUE) == TYPEERASE_SECTORS) || \
+ ((VALUE) == TYPEERASE_MASSERASE))
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Voltage_Range FLASH Voltage Range
+ * @{
+ */
+#define VOLTAGE_RANGE_1 ((uint32_t)0x00) /*!< Device operating range: 1.8V to 2.1V */
+#define VOLTAGE_RANGE_2 ((uint32_t)0x01) /*!< Device operating range: 2.1V to 2.7V */
+#define VOLTAGE_RANGE_3 ((uint32_t)0x02) /*!< Device operating range: 2.7V to 3.6V */
+#define VOLTAGE_RANGE_4 ((uint32_t)0x03) /*!< Device operating range: 2.7V to 3.6V + External Vpp */
+
+#define IS_VOLTAGERANGE(RANGE)(((RANGE) == VOLTAGE_RANGE_1) || \
+ ((RANGE) == VOLTAGE_RANGE_2) || \
+ ((RANGE) == VOLTAGE_RANGE_3) || \
+ ((RANGE) == VOLTAGE_RANGE_4))
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_WRP_State FLASH WRP State
+ * @{
+ */
+#define WRPSTATE_DISABLE ((uint32_t)0x00) /*!< Disable the write protection of the desired bank 1 sectors */
+#define WRPSTATE_ENABLE ((uint32_t)0x01) /*!< Enable the write protection of the desired bank 1 sectors */
+
+#define IS_WRPSTATE(VALUE)(((VALUE) == WRPSTATE_DISABLE) || \
+ ((VALUE) == WRPSTATE_ENABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Type FLASH Option Type
+ * @{
+ */
+#define OPTIONBYTE_WRP ((uint32_t)0x01) /*!< WRP option byte configuration */
+#define OPTIONBYTE_RDP ((uint32_t)0x02) /*!< RDP option byte configuration */
+#define OPTIONBYTE_USER ((uint32_t)0x04) /*!< USER option byte configuration */
+#define OPTIONBYTE_BOR ((uint32_t)0x08) /*!< BOR option byte configuration */
+
+#define IS_OPTIONBYTE(VALUE)(((VALUE) < (OPTIONBYTE_WRP|OPTIONBYTE_RDP|OPTIONBYTE_USER|OPTIONBYTE_BOR)))
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_Read_Protection FLASH Option Bytes Read Protection
+ * @{
+ */
+#define OB_RDP_LEVEL_0 ((uint8_t)0xAA)
+#define OB_RDP_LEVEL_1 ((uint8_t)0x55)
+/*#define OB_RDP_LEVEL_2 ((uint8_t)0xCC)*/ /*!< Warning: When enabling read protection level 2
+ it s no more possible to go back to level 1 or 0 */
+#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\
+ ((LEVEL) == OB_RDP_LEVEL_1))/*||\
+ ((LEVEL) == OB_RDP_LEVEL_2))*/
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_IWatchdog FLASH Option Bytes IWatchdog
+ * @{
+ */
+#define OB_IWDG_SW ((uint8_t)0x20) /*!< Software IWDG selected */
+#define OB_IWDG_HW ((uint8_t)0x00) /*!< Hardware IWDG selected */
+#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_nRST_STOP FLASH Option Bytes nRST_STOP
+ * @{
+ */
+#define OB_STOP_NO_RST ((uint8_t)0x40) /*!< No reset generated when entering in STOP */
+#define OB_STOP_RST ((uint8_t)0x00) /*!< Reset generated when entering in STOP */
+#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
+/**
+ * @}
+ */
+
+
+/** @defgroup FLASHEx_Option_Bytes_nRST_STDBY FLASH Option Bytes nRST_STDBY
+ * @{
+ */
+#define OB_STDBY_NO_RST ((uint8_t)0x80) /*!< No reset generated when entering in STANDBY */
+#define OB_STDBY_RST ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY */
+#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_BOR_Reset_Level FLASH BOR Reset Level
+ * @{
+ */
+#define OB_BOR_LEVEL3 ((uint8_t)0x00) /*!< Supply voltage ranges from 2.70 to 3.60 V */
+#define OB_BOR_LEVEL2 ((uint8_t)0x04) /*!< Supply voltage ranges from 2.40 to 2.70 V */
+#define OB_BOR_LEVEL1 ((uint8_t)0x08) /*!< Supply voltage ranges from 2.10 to 2.40 V */
+#define OB_BOR_OFF ((uint8_t)0x0C) /*!< Supply voltage ranges from 1.62 to 2.10 V */
+#define IS_OB_BOR_LEVEL(LEVEL) (((LEVEL) == OB_BOR_LEVEL1) || ((LEVEL) == OB_BOR_LEVEL2) ||\
+ ((LEVEL) == OB_BOR_LEVEL3) || ((LEVEL) == OB_BOR_OFF))
+/**
+ * @}
+ */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+/** @defgroup FLASHEx_PCROP_State FLASH PCROP State
+ * @{
+ */
+#define PCROPSTATE_DISABLE ((uint32_t)0x00) /*!< Disable PCROP */
+#define PCROPSTATE_ENABLE ((uint32_t)0x01) /*!< Enable PCROP */
+
+#define IS_PCROPSTATE(VALUE)(((VALUE) == PCROPSTATE_DISABLE) || \
+ ((VALUE) == PCROPSTATE_ENABLE))
+
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE */
+
+/** @defgroup FLASHEx_Advanced_Option_Type FLASH Advanced Option Type
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+#define OBEX_PCROP ((uint32_t)0x01) /*!< PCROP option byte configuration */
+#define OBEX_BOOTCONFIG ((uint32_t)0x02) /*!< BOOTConfig option byte configuration */
+
+#define IS_OBEX(VALUE)(((VALUE) == OBEX_PCROP) || \
+ ((VALUE) == OBEX_BOOTCONFIG))
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+#define OBEX_PCROP ((uint32_t)0x01) /*!<PCROP option byte configuration */
+
+#define IS_OBEX(VALUE)(((VALUE) == OBEX_PCROP))
+
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Latency FLASH Latency
+ * @{
+ */
+/*------------------------------------------- STM32F42xxx/STM32F43xxx------------------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero Latency cycle */
+#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One Latency cycle */
+#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two Latency cycles */
+#define FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three Latency cycles */
+#define FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four Latency cycles */
+#define FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH Five Latency cycles */
+#define FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH Six Latency cycles */
+#define FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH Seven Latency cycles */
+#define FLASH_LATENCY_8 FLASH_ACR_LATENCY_8WS /*!< FLASH Eight Latency cycles */
+#define FLASH_LATENCY_9 FLASH_ACR_LATENCY_9WS /*!< FLASH Nine Latency cycles */
+#define FLASH_LATENCY_10 FLASH_ACR_LATENCY_10WS /*!< FLASH Ten Latency cycles */
+#define FLASH_LATENCY_11 FLASH_ACR_LATENCY_11WS /*!< FLASH Eleven Latency cycles */
+#define FLASH_LATENCY_12 FLASH_ACR_LATENCY_12WS /*!< FLASH Twelve Latency cycles */
+#define FLASH_LATENCY_13 FLASH_ACR_LATENCY_13WS /*!< FLASH Thirteen Latency cycles */
+#define FLASH_LATENCY_14 FLASH_ACR_LATENCY_14WS /*!< FLASH Fourteen Latency cycles */
+#define FLASH_LATENCY_15 FLASH_ACR_LATENCY_15WS /*!< FLASH Fifteen Latency cycles */
+
+
+#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \
+ ((LATENCY) == FLASH_LATENCY_1) || \
+ ((LATENCY) == FLASH_LATENCY_2) || \
+ ((LATENCY) == FLASH_LATENCY_3) || \
+ ((LATENCY) == FLASH_LATENCY_4) || \
+ ((LATENCY) == FLASH_LATENCY_5) || \
+ ((LATENCY) == FLASH_LATENCY_6) || \
+ ((LATENCY) == FLASH_LATENCY_7) || \
+ ((LATENCY) == FLASH_LATENCY_8) || \
+ ((LATENCY) == FLASH_LATENCY_9) || \
+ ((LATENCY) == FLASH_LATENCY_10) || \
+ ((LATENCY) == FLASH_LATENCY_11) || \
+ ((LATENCY) == FLASH_LATENCY_12) || \
+ ((LATENCY) == FLASH_LATENCY_13) || \
+ ((LATENCY) == FLASH_LATENCY_14) || \
+ ((LATENCY) == FLASH_LATENCY_15))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+/*--------------------------------------------------------------------------------------------------------------*/
+
+/*-------------------------- STM32F40xxx/STM32F41xxx/STM32F401xx/STM32F411xx -----------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+
+#define FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero Latency cycle */
+#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One Latency cycle */
+#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two Latency cycles */
+#define FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three Latency cycles */
+#define FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four Latency cycles */
+#define FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH Five Latency cycles */
+#define FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH Six Latency cycles */
+#define FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH Seven Latency cycles */
+
+
+#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \
+ ((LATENCY) == FLASH_LATENCY_1) || \
+ ((LATENCY) == FLASH_LATENCY_2) || \
+ ((LATENCY) == FLASH_LATENCY_3) || \
+ ((LATENCY) == FLASH_LATENCY_4) || \
+ ((LATENCY) == FLASH_LATENCY_5) || \
+ ((LATENCY) == FLASH_LATENCY_6) || \
+ ((LATENCY) == FLASH_LATENCY_7))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+/*--------------------------------------------------------------------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+
+/** @defgroup FLASHEx_Banks FLASH Banks
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define FLASH_BANK_1 ((uint32_t)1) /*!< Bank 1 */
+#define FLASH_BANK_2 ((uint32_t)2) /*!< Bank 2 */
+#define FLASH_BANK_BOTH ((uint32_t)FLASH_BANK_1 | FLASH_BANK_2) /*!< Bank1 and Bank2 */
+
+#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1) || \
+ ((BANK) == FLASH_BANK_2) || \
+ ((BANK) == FLASH_BANK_BOTH))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+#define FLASH_BANK_1 ((uint32_t)1) /*!< Bank 1 */
+
+#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_MassErase_bit FLASH Mass Erase bit
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define FLASH_MER_BIT (FLASH_CR_MER1 | FLASH_CR_MER2) /*!< 2 MER bits here to clear */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+#define FLASH_MER_BIT (FLASH_CR_MER) /*!< only 1 MER Bit */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Sectors FLASH Sectors
+ * @{
+ */
+/*------------------------------------------ STM32F42xxx/STM32F43xxx--------------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define FLASH_SECTOR_0 ((uint32_t)0) /*!< Sector Number 0 */
+#define FLASH_SECTOR_1 ((uint32_t)1) /*!< Sector Number 1 */
+#define FLASH_SECTOR_2 ((uint32_t)2) /*!< Sector Number 2 */
+#define FLASH_SECTOR_3 ((uint32_t)3) /*!< Sector Number 3 */
+#define FLASH_SECTOR_4 ((uint32_t)4) /*!< Sector Number 4 */
+#define FLASH_SECTOR_5 ((uint32_t)5) /*!< Sector Number 5 */
+#define FLASH_SECTOR_6 ((uint32_t)6) /*!< Sector Number 6 */
+#define FLASH_SECTOR_7 ((uint32_t)7) /*!< Sector Number 7 */
+#define FLASH_SECTOR_8 ((uint32_t)8) /*!< Sector Number 8 */
+#define FLASH_SECTOR_9 ((uint32_t)9) /*!< Sector Number 9 */
+#define FLASH_SECTOR_10 ((uint32_t)10) /*!< Sector Number 10 */
+#define FLASH_SECTOR_11 ((uint32_t)11) /*!< Sector Number 11 */
+#define FLASH_SECTOR_12 ((uint32_t)12) /*!< Sector Number 12 */
+#define FLASH_SECTOR_13 ((uint32_t)13) /*!< Sector Number 13 */
+#define FLASH_SECTOR_14 ((uint32_t)14) /*!< Sector Number 14 */
+#define FLASH_SECTOR_15 ((uint32_t)15) /*!< Sector Number 15 */
+#define FLASH_SECTOR_16 ((uint32_t)16) /*!< Sector Number 16 */
+#define FLASH_SECTOR_17 ((uint32_t)17) /*!< Sector Number 17 */
+#define FLASH_SECTOR_18 ((uint32_t)18) /*!< Sector Number 18 */
+#define FLASH_SECTOR_19 ((uint32_t)19) /*!< Sector Number 19 */
+#define FLASH_SECTOR_20 ((uint32_t)20) /*!< Sector Number 20 */
+#define FLASH_SECTOR_21 ((uint32_t)21) /*!< Sector Number 21 */
+#define FLASH_SECTOR_22 ((uint32_t)22) /*!< Sector Number 22 */
+#define FLASH_SECTOR_23 ((uint32_t)23) /*!< Sector Number 23 */
+
+#define FLASH_SECTOR_TOTAL 24
+
+#define IS_FLASH_SECTOR(SECTOR) ( ((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
+ ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
+ ((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\
+ ((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7) ||\
+ ((SECTOR) == FLASH_SECTOR_8) || ((SECTOR) == FLASH_SECTOR_9) ||\
+ ((SECTOR) == FLASH_SECTOR_10) || ((SECTOR) == FLASH_SECTOR_11) ||\
+ ((SECTOR) == FLASH_SECTOR_12) || ((SECTOR) == FLASH_SECTOR_13) ||\
+ ((SECTOR) == FLASH_SECTOR_14) || ((SECTOR) == FLASH_SECTOR_15) ||\
+ ((SECTOR) == FLASH_SECTOR_16) || ((SECTOR) == FLASH_SECTOR_17) ||\
+ ((SECTOR) == FLASH_SECTOR_18) || ((SECTOR) == FLASH_SECTOR_19) ||\
+ ((SECTOR) == FLASH_SECTOR_20) || ((SECTOR) == FLASH_SECTOR_21) ||\
+ ((SECTOR) == FLASH_SECTOR_22) || ((SECTOR) == FLASH_SECTOR_23))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------- STM32F40xxx/STM32F41xxx -------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+#define FLASH_SECTOR_0 ((uint32_t)0) /*!< Sector Number 0 */
+#define FLASH_SECTOR_1 ((uint32_t)1) /*!< Sector Number 1 */
+#define FLASH_SECTOR_2 ((uint32_t)2) /*!< Sector Number 2 */
+#define FLASH_SECTOR_3 ((uint32_t)3) /*!< Sector Number 3 */
+#define FLASH_SECTOR_4 ((uint32_t)4) /*!< Sector Number 4 */
+#define FLASH_SECTOR_5 ((uint32_t)5) /*!< Sector Number 5 */
+#define FLASH_SECTOR_6 ((uint32_t)6) /*!< Sector Number 6 */
+#define FLASH_SECTOR_7 ((uint32_t)7) /*!< Sector Number 7 */
+#define FLASH_SECTOR_8 ((uint32_t)8) /*!< Sector Number 8 */
+#define FLASH_SECTOR_9 ((uint32_t)9) /*!< Sector Number 9 */
+#define FLASH_SECTOR_10 ((uint32_t)10) /*!< Sector Number 10 */
+#define FLASH_SECTOR_11 ((uint32_t)11) /*!< Sector Number 11 */
+
+#define FLASH_SECTOR_TOTAL 12
+
+#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
+ ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
+ ((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\
+ ((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7) ||\
+ ((SECTOR) == FLASH_SECTOR_8) || ((SECTOR) == FLASH_SECTOR_9) ||\
+ ((SECTOR) == FLASH_SECTOR_10) || ((SECTOR) == FLASH_SECTOR_11))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------------- STM32F401xC -------------------------------------------*/
+#if defined(STM32F401xC)
+#define FLASH_SECTOR_0 ((uint32_t)0) /*!< Sector Number 0 */
+#define FLASH_SECTOR_1 ((uint32_t)1) /*!< Sector Number 1 */
+#define FLASH_SECTOR_2 ((uint32_t)2) /*!< Sector Number 2 */
+#define FLASH_SECTOR_3 ((uint32_t)3) /*!< Sector Number 3 */
+#define FLASH_SECTOR_4 ((uint32_t)4) /*!< Sector Number 4 */
+#define FLASH_SECTOR_5 ((uint32_t)5) /*!< Sector Number 5 */
+
+#define FLASH_SECTOR_TOTAL 6
+
+#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
+ ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
+ ((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5))
+#endif /* STM32F401xC */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------- STM32F401xE/STM32F411xE -------------------------------------*/
+#if defined(STM32F401xE) || defined(STM32F411xE)
+#define FLASH_SECTOR_0 ((uint32_t)0) /*!< Sector Number 0 */
+#define FLASH_SECTOR_1 ((uint32_t)1) /*!< Sector Number 1 */
+#define FLASH_SECTOR_2 ((uint32_t)2) /*!< Sector Number 2 */
+#define FLASH_SECTOR_3 ((uint32_t)3) /*!< Sector Number 3 */
+#define FLASH_SECTOR_4 ((uint32_t)4) /*!< Sector Number 4 */
+#define FLASH_SECTOR_5 ((uint32_t)5) /*!< Sector Number 5 */
+#define FLASH_SECTOR_6 ((uint32_t)6) /*!< Sector Number 6 */
+#define FLASH_SECTOR_7 ((uint32_t)7) /*!< Sector Number 7 */
+
+#define FLASH_SECTOR_TOTAL 8
+
+#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\
+ ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\
+ ((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\
+ ((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7))
+#endif /* STM32F401xE || STM32F411xE */
+/*-----------------------------------------------------------------------------------------------------*/
+#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && ((ADDRESS) < FLASH_END))
+#define IS_NBSECTORS(NBSECTORS) (((NBSECTORS) != 0) && ((NBSECTORS) <= FLASH_SECTOR_TOTAL))
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection
+ * @{
+ */
+/*----------------------------------------- STM32F42xxx/STM32F43xxx-------------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define OB_WRP_SECTOR_0 ((uint32_t)0x00000001) /*!< Write protection of Sector0 */
+#define OB_WRP_SECTOR_1 ((uint32_t)0x00000002) /*!< Write protection of Sector1 */
+#define OB_WRP_SECTOR_2 ((uint32_t)0x00000004) /*!< Write protection of Sector2 */
+#define OB_WRP_SECTOR_3 ((uint32_t)0x00000008) /*!< Write protection of Sector3 */
+#define OB_WRP_SECTOR_4 ((uint32_t)0x00000010) /*!< Write protection of Sector4 */
+#define OB_WRP_SECTOR_5 ((uint32_t)0x00000020) /*!< Write protection of Sector5 */
+#define OB_WRP_SECTOR_6 ((uint32_t)0x00000040) /*!< Write protection of Sector6 */
+#define OB_WRP_SECTOR_7 ((uint32_t)0x00000080) /*!< Write protection of Sector7 */
+#define OB_WRP_SECTOR_8 ((uint32_t)0x00000100) /*!< Write protection of Sector8 */
+#define OB_WRP_SECTOR_9 ((uint32_t)0x00000200) /*!< Write protection of Sector9 */
+#define OB_WRP_SECTOR_10 ((uint32_t)0x00000400) /*!< Write protection of Sector10 */
+#define OB_WRP_SECTOR_11 ((uint32_t)0x00000800) /*!< Write protection of Sector11 */
+#define OB_WRP_SECTOR_12 ((uint32_t)0x00000001 << 12) /*!< Write protection of Sector12 */
+#define OB_WRP_SECTOR_13 ((uint32_t)0x00000002 << 12) /*!< Write protection of Sector13 */
+#define OB_WRP_SECTOR_14 ((uint32_t)0x00000004 << 12) /*!< Write protection of Sector14 */
+#define OB_WRP_SECTOR_15 ((uint32_t)0x00000008 << 12) /*!< Write protection of Sector15 */
+#define OB_WRP_SECTOR_16 ((uint32_t)0x00000010 << 12) /*!< Write protection of Sector16 */
+#define OB_WRP_SECTOR_17 ((uint32_t)0x00000020 << 12) /*!< Write protection of Sector17 */
+#define OB_WRP_SECTOR_18 ((uint32_t)0x00000040 << 12) /*!< Write protection of Sector18 */
+#define OB_WRP_SECTOR_19 ((uint32_t)0x00000080 << 12) /*!< Write protection of Sector19 */
+#define OB_WRP_SECTOR_20 ((uint32_t)0x00000100 << 12) /*!< Write protection of Sector20 */
+#define OB_WRP_SECTOR_21 ((uint32_t)0x00000200 << 12) /*!< Write protection of Sector21 */
+#define OB_WRP_SECTOR_22 ((uint32_t)0x00000400 << 12) /*!< Write protection of Sector22 */
+#define OB_WRP_SECTOR_23 ((uint32_t)0x00000800 << 12) /*!< Write protection of Sector23 */
+#define OB_WRP_SECTOR_All ((uint32_t)0x00000FFF << 12) /*!< Write protection of all Sectors */
+
+#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & (uint32_t)0xFF000000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------- STM32F40xxx/STM32F41xxx -------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+#define OB_WRP_SECTOR_0 ((uint32_t)0x00000001) /*!< Write protection of Sector0 */
+#define OB_WRP_SECTOR_1 ((uint32_t)0x00000002) /*!< Write protection of Sector1 */
+#define OB_WRP_SECTOR_2 ((uint32_t)0x00000004) /*!< Write protection of Sector2 */
+#define OB_WRP_SECTOR_3 ((uint32_t)0x00000008) /*!< Write protection of Sector3 */
+#define OB_WRP_SECTOR_4 ((uint32_t)0x00000010) /*!< Write protection of Sector4 */
+#define OB_WRP_SECTOR_5 ((uint32_t)0x00000020) /*!< Write protection of Sector5 */
+#define OB_WRP_SECTOR_6 ((uint32_t)0x00000040) /*!< Write protection of Sector6 */
+#define OB_WRP_SECTOR_7 ((uint32_t)0x00000080) /*!< Write protection of Sector7 */
+#define OB_WRP_SECTOR_8 ((uint32_t)0x00000100) /*!< Write protection of Sector8 */
+#define OB_WRP_SECTOR_9 ((uint32_t)0x00000200) /*!< Write protection of Sector9 */
+#define OB_WRP_SECTOR_10 ((uint32_t)0x00000400) /*!< Write protection of Sector10 */
+#define OB_WRP_SECTOR_11 ((uint32_t)0x00000800) /*!< Write protection of Sector11 */
+#define OB_WRP_SECTOR_All ((uint32_t)0x00000FFF) /*!< Write protection of all Sectors */
+
+#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------------- STM32F401xC -------------------------------------------*/
+#if defined(STM32F401xC)
+#define OB_WRP_SECTOR_0 ((uint32_t)0x00000001) /*!< Write protection of Sector0 */
+#define OB_WRP_SECTOR_1 ((uint32_t)0x00000002) /*!< Write protection of Sector1 */
+#define OB_WRP_SECTOR_2 ((uint32_t)0x00000004) /*!< Write protection of Sector2 */
+#define OB_WRP_SECTOR_3 ((uint32_t)0x00000008) /*!< Write protection of Sector3 */
+#define OB_WRP_SECTOR_4 ((uint32_t)0x00000010) /*!< Write protection of Sector4 */
+#define OB_WRP_SECTOR_5 ((uint32_t)0x00000020) /*!< Write protection of Sector5 */
+#define OB_WRP_SECTOR_All ((uint32_t)0x00000FFF) /*!< Write protection of all Sectors */
+
+#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F401xC */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------- STM32F401xE/STM32F411xE -------------------------------------*/
+#if defined(STM32F401xE) || defined(STM32F411xE)
+#define OB_WRP_SECTOR_0 ((uint32_t)0x00000001) /*!< Write protection of Sector0 */
+#define OB_WRP_SECTOR_1 ((uint32_t)0x00000002) /*!< Write protection of Sector1 */
+#define OB_WRP_SECTOR_2 ((uint32_t)0x00000004) /*!< Write protection of Sector2 */
+#define OB_WRP_SECTOR_3 ((uint32_t)0x00000008) /*!< Write protection of Sector3 */
+#define OB_WRP_SECTOR_4 ((uint32_t)0x00000010) /*!< Write protection of Sector4 */
+#define OB_WRP_SECTOR_5 ((uint32_t)0x00000020) /*!< Write protection of Sector5 */
+#define OB_WRP_SECTOR_6 ((uint32_t)0x00000040) /*!< Write protection of Sector6 */
+#define OB_WRP_SECTOR_7 ((uint32_t)0x00000080) /*!< Write protection of Sector7 */
+#define OB_WRP_SECTOR_All ((uint32_t)0x00000FFF) /*!< Write protection of all Sectors */
+
+#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F401xE || STM32F411xE */
+/*-----------------------------------------------------------------------------------------------------*/
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Option_Bytes_PC_ReadWrite_Protection FLASH Option Bytes PC ReadWrite Protection
+ * @{
+ */
+/*----------------------------------------- STM32F42xxx/STM32F43xxx-------------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define OB_PCROP_SECTOR_0 ((uint32_t)0x00000001) /*!< PC Read/Write protection of Sector0 */
+#define OB_PCROP_SECTOR_1 ((uint32_t)0x00000002) /*!< PC Read/Write protection of Sector1 */
+#define OB_PCROP_SECTOR_2 ((uint32_t)0x00000004) /*!< PC Read/Write protection of Sector2 */
+#define OB_PCROP_SECTOR_3 ((uint32_t)0x00000008) /*!< PC Read/Write protection of Sector3 */
+#define OB_PCROP_SECTOR_4 ((uint32_t)0x00000010) /*!< PC Read/Write protection of Sector4 */
+#define OB_PCROP_SECTOR_5 ((uint32_t)0x00000020) /*!< PC Read/Write protection of Sector5 */
+#define OB_PCROP_SECTOR_6 ((uint32_t)0x00000040) /*!< PC Read/Write protection of Sector6 */
+#define OB_PCROP_SECTOR_7 ((uint32_t)0x00000080) /*!< PC Read/Write protection of Sector7 */
+#define OB_PCROP_SECTOR_8 ((uint32_t)0x00000100) /*!< PC Read/Write protection of Sector8 */
+#define OB_PCROP_SECTOR_9 ((uint32_t)0x00000200) /*!< PC Read/Write protection of Sector9 */
+#define OB_PCROP_SECTOR_10 ((uint32_t)0x00000400) /*!< PC Read/Write protection of Sector10 */
+#define OB_PCROP_SECTOR_11 ((uint32_t)0x00000800) /*!< PC Read/Write protection of Sector11 */
+#define OB_PCROP_SECTOR_12 ((uint32_t)0x00000001) /*!< PC Read/Write protection of Sector12 */
+#define OB_PCROP_SECTOR_13 ((uint32_t)0x00000002) /*!< PC Read/Write protection of Sector13 */
+#define OB_PCROP_SECTOR_14 ((uint32_t)0x00000004) /*!< PC Read/Write protection of Sector14 */
+#define OB_PCROP_SECTOR_15 ((uint32_t)0x00000008) /*!< PC Read/Write protection of Sector15 */
+#define OB_PCROP_SECTOR_16 ((uint32_t)0x00000010) /*!< PC Read/Write protection of Sector16 */
+#define OB_PCROP_SECTOR_17 ((uint32_t)0x00000020) /*!< PC Read/Write protection of Sector17 */
+#define OB_PCROP_SECTOR_18 ((uint32_t)0x00000040) /*!< PC Read/Write protection of Sector18 */
+#define OB_PCROP_SECTOR_19 ((uint32_t)0x00000080) /*!< PC Read/Write protection of Sector19 */
+#define OB_PCROP_SECTOR_20 ((uint32_t)0x00000100) /*!< PC Read/Write protection of Sector20 */
+#define OB_PCROP_SECTOR_21 ((uint32_t)0x00000200) /*!< PC Read/Write protection of Sector21 */
+#define OB_PCROP_SECTOR_22 ((uint32_t)0x00000400) /*!< PC Read/Write protection of Sector22 */
+#define OB_PCROP_SECTOR_23 ((uint32_t)0x00000800) /*!< PC Read/Write protection of Sector23 */
+#define OB_PCROP_SECTOR_All ((uint32_t)0x00000FFF) /*!< PC Read/Write protection of all Sectors */
+
+#define IS_OB_PCROP(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------------- STM32F401xC -------------------------------------------*/
+#if defined(STM32F401xC)
+#define OB_PCROP_SECTOR_0 ((uint32_t)0x00000001) /*!< PC Read/Write protection of Sector0 */
+#define OB_PCROP_SECTOR_1 ((uint32_t)0x00000002) /*!< PC Read/Write protection of Sector1 */
+#define OB_PCROP_SECTOR_2 ((uint32_t)0x00000004) /*!< PC Read/Write protection of Sector2 */
+#define OB_PCROP_SECTOR_3 ((uint32_t)0x00000008) /*!< PC Read/Write protection of Sector3 */
+#define OB_PCROP_SECTOR_4 ((uint32_t)0x00000010) /*!< PC Read/Write protection of Sector4 */
+#define OB_PCROP_SECTOR_5 ((uint32_t)0x00000020) /*!< PC Read/Write protection of Sector5 */
+#define OB_PCROP_SECTOR_All ((uint32_t)0x00000FFF) /*!< PC Read/Write protection of all Sectors */
+
+#define IS_OB_PCROP(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F401xC */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/*--------------------------------------- STM32F401xE/STM32F411xE -------------------------------------*/
+#if defined(STM32F401xE) || defined(STM32F411xE)
+#define OB_PCROP_SECTOR_0 ((uint32_t)0x00000001) /*!< PC Read/Write protection of Sector0 */
+#define OB_PCROP_SECTOR_1 ((uint32_t)0x00000002) /*!< PC Read/Write protection of Sector1 */
+#define OB_PCROP_SECTOR_2 ((uint32_t)0x00000004) /*!< PC Read/Write protection of Sector2 */
+#define OB_PCROP_SECTOR_3 ((uint32_t)0x00000008) /*!< PC Read/Write protection of Sector3 */
+#define OB_PCROP_SECTOR_4 ((uint32_t)0x00000010) /*!< PC Read/Write protection of Sector4 */
+#define OB_PCROP_SECTOR_5 ((uint32_t)0x00000020) /*!< PC Read/Write protection of Sector5 */
+#define OB_PCROP_SECTOR_6 ((uint32_t)0x00000040) /*!< PC Read/Write protection of Sector6 */
+#define OB_PCROP_SECTOR_7 ((uint32_t)0x00000080) /*!< PC Read/Write protection of Sector7 */
+#define OB_PCROP_SECTOR_All ((uint32_t)0x00000FFF) /*!< PC Read/Write protection of all Sectors */
+
+#define IS_OB_PCROP(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000))
+#endif /* STM32F401xE || STM32F411xE */
+/*-----------------------------------------------------------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Dual_Boot FLASH Dual Boot
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define OB_DUAL_BOOT_ENABLE ((uint8_t)0x10) /*!< Dual Bank Boot Enable */
+#define OB_DUAL_BOOT_DISABLE ((uint8_t)0x00) /*!< Dual Bank Boot Disable, always boot on User Flash */
+#define IS_OB_BOOT(BOOT) (((BOOT) == OB_DUAL_BOOT_ENABLE) || ((BOOT) == OB_DUAL_BOOT_DISABLE))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Selection_Protection_Mode FLASH Selection Protection Mode
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+#define OB_PCROP_DESELECTED ((uint8_t)0x00) /*!< Disabled PcROP, nWPRi bits used for Write Protection on sector i */
+#define OB_PCROP_SELECTED ((uint8_t)0x80) /*!< Enable PcROP, nWPRi bits used for PCRoP Protection on sector i */
+#define IS_OB_PCROP_SELECT(PCROP) (((PCROP) == OB_PCROP_SELECTED) || ((PCROP) == OB_PCROP_DESELECTED))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE */
+/**
+ * @}
+ */
+
+/**
+ * @brief OPTCR1 register byte 2 (Bits[23:16]) base address
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define OPTCR1_BYTE2_ADDRESS ((uint32_t)0x40023C1A)
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Extension Program operation functions *************************************/
+HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError);
+HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit);
+HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
+void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+HAL_StatusTypeDef HAL_FLASHEx_AdvOBProgram (FLASH_AdvOBProgramInitTypeDef *pAdvOBInit);
+void HAL_FLASHEx_AdvOBGetConfig(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit);
+HAL_StatusTypeDef HAL_FLASHEx_OB_SelectPCROP(void);
+HAL_StatusTypeDef HAL_FLASHEx_OB_DeSelectPCROP(void);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+uint16_t HAL_FLASHEx_OB_GetBank2WRP(void);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+
+void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_FLASH_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_flash_ramfunc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,84 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_flash_ramfunc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of FLASH RAMFUNC driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_FLASH_RAMFUNC_H
+#define __STM32F4xx_FLASH_RAMFUNC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F411xE)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASH_RAMFUNC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+__RAM_FUNC HAL_FLASHEx_StopFlashInterfaceClk(void);
+__RAM_FUNC HAL_FLASHEx_StartFlashInterfaceClk(void);
+__RAM_FUNC HAL_FLASHEx_EnableFlashSleepMode(void);
+__RAM_FUNC HAL_FLASHEx_DisableFlashSleepMode(void);
+
+#endif /* STM32F411xE */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_FLASH_RAMFUNC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_gpio.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,271 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_gpio.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of GPIO HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_GPIO_H
+#define __STM32F4xx_HAL_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup GPIO
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief GPIO Init structure definition
+ */
+typedef struct
+{
+ uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
+ This parameter can be any value of @ref GPIO_pins_define */
+
+ uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref GPIO_mode_define */
+
+ uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
+ This parameter can be a value of @ref GPIO_pull_define */
+
+ uint32_t Speed; /*!< Specifies the speed for the selected pins.
+ This parameter can be a value of @ref GPIO_speed_define */
+
+ uint32_t Alternate; /*!< Peripheral to be connected to the selected pins.
+ This parameter can be a value of @ref GPIO_Alternat_function_selection */
+}GPIO_InitTypeDef;
+
+/**
+ * @brief GPIO Bit SET and Bit RESET enumeration
+ */
+typedef enum
+{
+ GPIO_PIN_RESET = 0,
+ GPIO_PIN_SET
+}GPIO_PinState;
+#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Constants
+ * @{
+ */
+
+/** @defgroup GPIO_pins_define
+ * @{
+ */
+#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */
+#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */
+#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */
+#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */
+#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */
+#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */
+#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */
+#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */
+#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */
+#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */
+#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */
+#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */
+#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */
+#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */
+#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */
+#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */
+#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */
+
+#define GPIO_PIN_MASK ((uint32_t)0x0000FFFF) /* PIN mask for assert test */
+#define IS_GPIO_PIN(PIN) (((PIN) & GPIO_PIN_MASK ) != (uint32_t)0x00)
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_mode_define
+ * @brief GPIO Configuration Mode
+ * Elements values convention: 0xX0yz00YZ
+ * - X : GPIO mode or EXTI Mode
+ * - y : External IT or Event trigger detection
+ * - z : IO configuration on External IT or Event
+ * - Y : Output type (Push Pull or Open Drain)
+ * - Z : IO Direction mode (Input, Output, Alternate or Analog)
+ * @{
+ */
+#define GPIO_MODE_INPUT ((uint32_t)0x00000000) /*!< Input Floating Mode */
+#define GPIO_MODE_OUTPUT_PP ((uint32_t)0x00000001) /*!< Output Push Pull Mode */
+#define GPIO_MODE_OUTPUT_OD ((uint32_t)0x00000011) /*!< Output Open Drain Mode */
+#define GPIO_MODE_AF_PP ((uint32_t)0x00000002) /*!< Alternate Function Push Pull Mode */
+#define GPIO_MODE_AF_OD ((uint32_t)0x00000012) /*!< Alternate Function Open Drain Mode */
+
+#define GPIO_MODE_ANALOG ((uint32_t)0x00000003) /*!< Analog Mode */
+
+#define GPIO_MODE_IT_RISING ((uint32_t)0x10110000) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define GPIO_MODE_IT_FALLING ((uint32_t)0x10210000) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define GPIO_MODE_IT_RISING_FALLING ((uint32_t)0x10310000) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+
+#define GPIO_MODE_EVT_RISING ((uint32_t)0x10120000) /*!< External Event Mode with Rising edge trigger detection */
+#define GPIO_MODE_EVT_FALLING ((uint32_t)0x10220000) /*!< External Event Mode with Falling edge trigger detection */
+#define GPIO_MODE_EVT_RISING_FALLING ((uint32_t)0x10320000) /*!< External Event Mode with Rising/Falling edge trigger detection */
+
+#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\
+ ((MODE) == GPIO_MODE_OUTPUT_PP) ||\
+ ((MODE) == GPIO_MODE_OUTPUT_OD) ||\
+ ((MODE) == GPIO_MODE_AF_PP) ||\
+ ((MODE) == GPIO_MODE_AF_OD) ||\
+ ((MODE) == GPIO_MODE_IT_RISING) ||\
+ ((MODE) == GPIO_MODE_IT_FALLING) ||\
+ ((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\
+ ((MODE) == GPIO_MODE_EVT_RISING) ||\
+ ((MODE) == GPIO_MODE_EVT_FALLING) ||\
+ ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
+ ((MODE) == GPIO_MODE_ANALOG))
+
+/**
+ * @}
+ */
+/** @defgroup GPIO_speed_define
+ * @brief GPIO Output Maximum frequency
+ * @{
+ */
+#define GPIO_SPEED_LOW ((uint32_t)0x00000000) /*!< Low speed */
+#define GPIO_SPEED_MEDIUM ((uint32_t)0x00000001) /*!< Medium speed */
+#define GPIO_SPEED_FAST ((uint32_t)0x00000002) /*!< Fast speed */
+#define GPIO_SPEED_HIGH ((uint32_t)0x00000003) /*!< High speed */
+
+#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_LOW) || ((SPEED) == GPIO_SPEED_MEDIUM) || \
+ ((SPEED) == GPIO_SPEED_FAST) || ((SPEED) == GPIO_SPEED_HIGH))
+/**
+ * @}
+ */
+
+ /** @defgroup GPIO_pull_define
+ * @brief GPIO Pull-Up or Pull-Down Activation
+ * @{
+ */
+#define GPIO_NOPULL ((uint32_t)0x00000000) /*!< No Pull-up or Pull-down activation */
+#define GPIO_PULLUP ((uint32_t)0x00000001) /*!< Pull-up activation */
+#define GPIO_PULLDOWN ((uint32_t)0x00000002) /*!< Pull-down activation */
+
+#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
+ ((PULL) == GPIO_PULLDOWN))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/**
+ * @brief Checks whether the specified EXTI line flag is set or not.
+ * @param __EXTI_LINE__: specifies the EXTI line flag to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clears the EXTI's line pending flags.
+ * @param __EXTI_LINE__: specifies the EXTI lines flags to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Checks whether the specified EXTI line is asserted or not.
+ * @param __EXTI_LINE__: specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clears the EXTI's line pending bits.
+ * @param __EXTI_LINE__: specifies the EXTI lines to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Generates a Software interrupt on selected EXTI line.
+ * @param __EXTI_LINE__: specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+
+/* Include GPIO HAL Extension module */
+#include "stm32f4xx_hal_gpio_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions *******************************/
+void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
+void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
+
+/* IO operation functions *******************************************************/
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_GPIO_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_gpio_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,826 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_gpio_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of GPIO HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_GPIO_EX_H
+#define __STM32F4xx_HAL_GPIO_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup GPIO
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Constants
+ * @{
+ */
+
+/** @defgroup GPIO_Alternat_function_selection
+ * @{
+ */
+
+/*------------------------- STM32F429xx/STM32F439xx---------------------------*/
+#if defined (STM32F429xx) || defined (STM32F439xx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */
+#define GPIO_AF5_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */
+#define GPIO_AF5_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */
+#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
+#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART7 Alternate Function mapping */
+#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_LTDC ((uint8_t)0x09) /* LCD-TFT Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0xA) /* OTG_HS Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FMC ((uint8_t)0xC) /* FMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xC) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */
+
+/**
+ * @brief AF 14 selection
+ */
+#define GPIO_AF14_LTDC ((uint8_t)0x0E) /* LCD-TFT Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
+ ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
+ ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
+ ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \
+ ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
+ ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
+ ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1) || \
+ ((AF) == GPIO_AF14_LTDC))
+
+#endif /* STM32F429xx || STM32F439xx */
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F427xx/STM32F437xx--------------------------------*/
+#if defined (STM32F427xx) || defined (STM32F437xx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */
+#define GPIO_AF5_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */
+#define GPIO_AF5_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */
+#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
+#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART7 Alternate Function mapping */
+#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0xA) /* OTG_HS Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FMC ((uint8_t)0xC) /* FMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xC) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
+ ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
+ ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
+ ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \
+ ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \
+ ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \
+ ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1))
+
+#endif /* STM32F427xx || STM32F437xx */
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F407xx/STM32F417xx--------------------------------*/
+#if defined (STM32F407xx) || defined (STM32F417xx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0xA) /* OTG_HS Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FSMC ((uint8_t)0xC) /* FSMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xC) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
+ ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
+ ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
+ ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \
+ ((AF) == GPIO_AF12_FSMC) || ((AF) == GPIO_AF15_EVENTOUT))
+
+#endif /* STM32F407xx || STM32F417xx */
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------- STM32F405xx/STM32F415xx--------------------------------*/
+#if defined (STM32F405xx) || defined (STM32F415xx)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */
+#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */
+#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */
+#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */
+#define GPIO_AF10_OTG_HS ((uint8_t)0xA) /* OTG_HS Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_FSMC ((uint8_t)0xC) /* FSMC Alternate Function mapping */
+#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xC) /* OTG HS configured in FS, Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \
+ ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \
+ ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \
+ ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \
+ ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \
+ ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \
+ ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \
+ ((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDIO) || \
+ ((AF) == GPIO_AF12_FSMC) || ((AF) == GPIO_AF15_EVENTOUT))
+
+#endif /* STM32F405xx || STM32F415xx */
+
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------------- STM32F401xx--------------------------------------*/
+#if defined(STM32F401xC) || defined(STM32F401xE)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */
+#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */
+
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF4_I2C1) || \
+ ((AF) == GPIO_AF4_I2C2) || ((AF) == GPIO_AF4_I2C3) || \
+ ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF8_USART6) || ((AF) == GPIO_AF10_OTG_FS) || \
+ ((AF) == GPIO_AF9_I2C2) || ((AF) == GPIO_AF9_I2C3) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF15_EVENTOUT))
+
+#endif /* STM32F401xC || STM32F401xE */
+/*------------------------------------------------------------------------------------------*/
+
+/*---------------------------------------- STM32F411xx--------------------------------------*/
+#if defined(STM32F411xE)
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */
+#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */
+#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */
+#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_SPI4 ((uint8_t)0x06) /* SPI4/I2S4 Alternate Function mapping */
+#define GPIO_AF6_SPI5 ((uint8_t)0x06) /* SPI5/I2S5 Alternate Function mapping */
+#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */
+#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */
+
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \
+ ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \
+ ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \
+ ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \
+ ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \
+ ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF4_I2C1) || \
+ ((AF) == GPIO_AF4_I2C2) || ((AF) == GPIO_AF4_I2C3) || \
+ ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \
+ ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF6_SPI4) || \
+ ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF5_SPI4) || \
+ ((AF) == GPIO_AF6_SPI5) || ((AF) == GPIO_AF7_SPI3) || \
+ ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \
+ ((AF) == GPIO_AF8_USART6) || ((AF) == GPIO_AF10_OTG_FS) || \
+ ((AF) == GPIO_AF9_I2C2) || ((AF) == GPIO_AF9_I2C3) || \
+ ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF15_EVENTOUT))
+
+#endif /* STM32F411xE */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_GPIO_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_hash.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,331 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_hash.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of HASH HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_HASH_H
+#define __STM32F4xx_HAL_HASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F415xx) || defined(STM32F417xx) || defined(STM32F437xx) || defined(STM32F439xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HASH
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HASH Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string.
+ This parameter can be a value of @ref HASH_Data_Type */
+
+ uint32_t KeySize; /*!< The key size is used only in HMAC operation */
+
+ uint8_t* pKey; /*!< The key is used only in HMAC operation */
+}HASH_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_HASH_STATE_RESET = 0x00, /*!< HASH not yet initialized or disabled */
+ HAL_HASH_STATE_READY = 0x01, /*!< HASH initialized and ready for use */
+ HAL_HASH_STATE_BUSY = 0x02, /*!< HASH internal process is ongoing */
+ HAL_HASH_STATE_TIMEOUT = 0x03, /*!< HASH timeout state */
+ HAL_HASH_STATE_ERROR = 0x04 /*!< HASH error state */
+}HAL_HASH_STATETypeDef;
+
+/**
+ * @brief HAL phase structures definition
+ */
+typedef enum
+{
+ HAL_HASH_PHASE_READY = 0x01, /*!< HASH peripheral is ready for initialization */
+ HAL_HASH_PHASE_PROCESS = 0x02, /*!< HASH peripheral is in processing phase */
+}HAL_HASHPhaseTypeDef;
+
+/**
+ * @brief HASH Handle Structure definition
+ */
+typedef struct
+{
+ HASH_InitTypeDef Init; /*!< HASH required parameters */
+
+ uint8_t *pHashInBuffPtr; /*!< Pointer to input buffer */
+
+ uint8_t *pHashOutBuffPtr; /*!< Pointer to input buffer */
+
+ __IO uint32_t HashBuffSize; /*!< Size of buffer to be processed */
+
+ __IO uint32_t HashInCount; /*!< Counter of inputed data */
+
+ __IO uint32_t HashITCounter; /*!< Counter of issued interrupts */
+
+ HAL_StatusTypeDef Status; /*!< HASH peripheral status */
+
+ HAL_HASHPhaseTypeDef Phase; /*!< HASH peripheral phase */
+
+ DMA_HandleTypeDef *hdmain; /*!< HASH In DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< HASH locking object */
+
+ __IO HAL_HASH_STATETypeDef State; /*!< HASH peripheral state */
+} HASH_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup HASH_Exported_Constants
+ * @{
+ */
+
+/** @defgroup HASH_Algo_Selection
+ * @{
+ */
+#define HASH_AlgoSelection_SHA1 ((uint32_t)0x0000) /*!< HASH function is SHA1 */
+#define HASH_AlgoSelection_SHA224 HASH_CR_ALGO_1 /*!< HASH function is SHA224 */
+#define HASH_AlgoSelection_SHA256 HASH_CR_ALGO /*!< HASH function is SHA256 */
+#define HASH_AlgoSelection_MD5 HASH_CR_ALGO_0 /*!< HASH function is MD5 */
+
+#define IS_HASH_ALGOSELECTION(ALGOSELECTION) (((ALGOSELECTION) == HASH_AlgoSelection_SHA1) || \
+ ((ALGOSELECTION) == HASH_AlgoSelection_SHA224) || \
+ ((ALGOSELECTION) == HASH_AlgoSelection_SHA256) || \
+ ((ALGOSELECTION) == HASH_AlgoSelection_MD5))
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Algorithm_Mode
+ * @{
+ */
+#define HASH_AlgoMode_HASH ((uint32_t)0x00000000) /*!< Algorithm is HASH */
+#define HASH_AlgoMode_HMAC HASH_CR_MODE /*!< Algorithm is HMAC */
+
+#define IS_HASH_ALGOMODE(ALGOMODE) (((ALGOMODE) == HASH_AlgoMode_HASH) || \
+ ((ALGOMODE) == HASH_AlgoMode_HMAC))
+/**
+ * @}
+ */
+
+/** @defgroup HASH_Data_Type
+ * @{
+ */
+#define HASH_DATATYPE_32B ((uint32_t)0x0000) /*!< 32-bit data. No swapping */
+#define HASH_DATATYPE_16B HASH_CR_DATATYPE_0 /*!< 16-bit data. Each half word is swapped */
+#define HASH_DATATYPE_8B HASH_CR_DATATYPE_1 /*!< 8-bit data. All bytes are swapped */
+#define HASH_DATATYPE_1B HASH_CR_DATATYPE /*!< 1-bit data. In the word all bits are swapped */
+
+#define IS_HASH_DATATYPE(DATATYPE) (((DATATYPE) == HASH_DATATYPE_32B)|| \
+ ((DATATYPE) == HASH_DATATYPE_16B)|| \
+ ((DATATYPE) == HASH_DATATYPE_8B) || \
+ ((DATATYPE) == HASH_DATATYPE_1B))
+/**
+ * @}
+ */
+
+/** @defgroup HASH_HMAC_Long_key_only_for_HMAC_mode
+ * @{
+ */
+#define HASH_HMACKeyType_ShortKey ((uint32_t)0x00000000) /*!< HMAC Key is <= 64 bytes */
+#define HASH_HMACKeyType_LongKey HASH_CR_LKEY /*!< HMAC Key is > 64 bytes */
+
+#define IS_HASH_HMAC_KEYTYPE(KEYTYPE) (((KEYTYPE) == HASH_HMACKeyType_ShortKey) || \
+ ((KEYTYPE) == HASH_HMACKeyType_LongKey))
+/**
+ * @}
+ */
+
+/** @defgroup HASH_flags_definition
+ * @{
+ */
+#define HASH_FLAG_DINIS HASH_SR_DINIS /*!< 16 locations are free in the DIN : A new block can be entered into the input buffer */
+#define HASH_FLAG_DCIS HASH_SR_DCIS /*!< Digest calculation complete */
+#define HASH_FLAG_DMAS HASH_SR_DMAS /*!< DMA interface is enabled (DMAE=1) or a transfer is ongoing */
+#define HASH_FLAG_BUSY HASH_SR_BUSY /*!< The hash core is Busy : processing a block of data */
+#define HASH_FLAG_DINNE HASH_CR_DINNE /*!< DIN not empty : The input buffer contains at least one word of data */
+/**
+ * @}
+ */
+
+/** @defgroup HASH_interrupts_definition
+ * @{
+ */
+#define HASH_IT_DINI HASH_IMR_DINIM /*!< A new block can be entered into the input buffer (DIN) */
+#define HASH_IT_DCI HASH_IMR_DCIM /*!< Digest calculation complete */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset HASH handle state
+ * @param __HANDLE__: specifies the HASH handle.
+ * @retval None
+ */
+#define __HAL_HASH_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_HASH_STATE_RESET)
+
+/** @brief Check whether the specified HASH flag is set or not.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg HASH_FLAG_DINIS: A new block can be entered into the input buffer.
+ * @arg HASH_FLAG_DCIS: Digest calculation complete
+ * @arg HASH_FLAG_DMAS: DMA interface is enabled (DMAE=1) or a transfer is ongoing
+ * @arg HASH_FLAG_BUSY: The hash core is Busy : processing a block of data
+ * @arg HASH_FLAG_DINNE: DIN not empty : The input buffer contains at least one word of data
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_HASH_GET_FLAG(__FLAG__) ((HASH->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Macros for HMAC finish.
+ * @param None
+ * @retval None
+ */
+#define HAL_HMAC_MD5_Finish HAL_HASH_MD5_Finish
+#define HAL_HMAC_SHA1_Finish HAL_HASH_SHA1_Finish
+#define HAL_HMAC_SHA224_Finish HAL_HASH_SHA224_Finish
+#define HAL_HMAC_SHA256_Finish HAL_HASH_SHA256_Finish
+
+/**
+ * @brief Enable the multiple DMA mode.
+ * This feature is available only in STM32F429x and STM32F439x devices.
+ * @param None
+ * @retval None
+ */
+#define __HAL_HASH_SET_MDMAT() HASH->CR |= HASH_CR_MDMAT
+
+/**
+ * @brief Disable the multiple DMA mode.
+ * @param None
+ * @retval None
+ */
+#define __HAL_HASH_RESET_MDMAT() HASH->CR &= (uint32_t)(~HASH_CR_MDMAT)
+
+/**
+ * @brief Start the digest computation
+ * @param None
+ * @retval None
+ */
+#define __HAL_HASH_START_DIGEST() HASH->STR |= HASH_STR_DCAL
+
+/**
+ * @brief Set the number of valid bits in last word written in Data register
+ * @param SIZE: size in byte of last data written in Data register.
+ * @retval None
+*/
+#define __HAL_HASH_SET_NBVALIDBITS(SIZE) do{HASH->STR &= ~(HASH_STR_NBW);\
+ HASH->STR |= 8 * ((SIZE) % 4);\
+ }while(0)
+
+/* Include HASH HAL Extension module */
+#include "stm32f4xx_hal_hash_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_HASH_Init(HASH_HandleTypeDef *hhash);
+HAL_StatusTypeDef HAL_HASH_DeInit(HASH_HandleTypeDef *hhash);
+
+/* HASH processing using polling *********************************************/
+HAL_StatusTypeDef HAL_HASH_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASH_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASH_MD5_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASH_SHA1_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+
+/* HASH-MAC processing using polling *****************************************/
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HMAC_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+
+/* HASH processing using interrupt *******************************************/
+HAL_StatusTypeDef HAL_HASH_SHA1_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+HAL_StatusTypeDef HAL_HASH_MD5_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+
+/* HASH processing using DMA *************************************************/
+HAL_StatusTypeDef HAL_HASH_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASH_SHA1_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASH_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASH_MD5_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+
+/* HASH-HMAC processing using DMA ********************************************/
+HAL_StatusTypeDef HAL_HMAC_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HMAC_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+
+/* Processing functions ******************************************************/
+void HAL_HASH_IRQHandler(HASH_HandleTypeDef *hhash);
+
+/* Peripheral State functions ************************************************/
+HAL_HASH_STATETypeDef HAL_HASH_GetState(HASH_HandleTypeDef *hhash);
+void HAL_HASH_MspInit(HASH_HandleTypeDef *hhash);
+void HAL_HASH_MspDeInit(HASH_HandleTypeDef *hhash);
+void HAL_HASH_InCpltCallback(HASH_HandleTypeDef *hhash);
+void HAL_HASH_DgstCpltCallback(HASH_HandleTypeDef *hhash);
+void HAL_HASH_ErrorCallback(HASH_HandleTypeDef *hhash);
+
+#endif /* STM32F415xx || STM32F417xx || STM32F437xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_HASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_hash_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,105 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_hash_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of HASH HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_HASH_EX_H
+#define __STM32F4xx_HAL_HASH_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F437xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HASHEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/* HASH processing using polling *********************************************/
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+
+/* HASH-MAC processing using polling *****************************************/
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout);
+
+/* HASH processing using interrupt *******************************************/
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer);
+
+/* HASH processing using DMA *************************************************/
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASHEx_SHA224_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HASHEx_SHA256_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout);
+
+/* HASH-HMAC processing using DMA ********************************************/
+HAL_StatusTypeDef HAL_HMACEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+HAL_StatusTypeDef HAL_HMACEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size);
+
+/* Processing functions ******************************************************/
+void HAL_HASHEx_IRQHandler(HASH_HandleTypeDef *hhash);
+
+#endif /* STM32F437xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_HASH_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_hcd.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,224 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_hcd.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of HCD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_HCD_H
+#define __STM32F4xx_HAL_HCD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_usb.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HCD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+ /**
+ * @brief HCD Status structures structure definition
+ */
+typedef enum
+{
+ HAL_HCD_STATE_RESET = 0x00,
+ HAL_HCD_STATE_READY = 0x01,
+ HAL_HCD_STATE_ERROR = 0x02,
+ HAL_HCD_STATE_BUSY = 0x03,
+ HAL_HCD_STATE_TIMEOUT = 0x04
+} HCD_StateTypeDef;
+
+typedef USB_OTG_GlobalTypeDef HCD_TypeDef;
+typedef USB_OTG_CfgTypeDef HCD_InitTypeDef;
+typedef USB_OTG_HCTypeDef HCD_HCTypeDef ;
+typedef USB_OTG_URBStateTypeDef HCD_URBStateTypeDef ;
+typedef USB_OTG_HCStateTypeDef HCD_HCStateTypeDef ;
+
+/**
+ * @brief HCD Handle Structure definition
+ */
+typedef struct
+{
+ HCD_TypeDef *Instance; /*!< Register base address */
+ HCD_InitTypeDef Init; /*!< HCD required parameters */
+ HCD_HCTypeDef hc[15]; /*!< Host channels parameters */
+ HAL_LockTypeDef Lock; /*!< HCD peripheral status */
+ __IO HCD_StateTypeDef State; /*!< HCD communication state */
+ void *pData; /*!< Pointer Stack Handler */
+
+} HCD_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup HCD_Exported_Constants
+ * @{
+ */
+
+/** @defgroup HCD_Instance_definition
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+ #define IS_HCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS) || \
+ ((INSTANCE) == USB_OTG_HS))
+#elif defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+ #define IS_HCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS))
+#endif
+
+/**
+ * @}
+ */
+
+/** @defgroup HCD_Speed
+ * @{
+ */
+#define HCD_SPEED_HIGH 0
+#define HCD_SPEED_LOW 2
+#define HCD_SPEED_FULL 3
+
+/**
+ * @}
+ */
+
+ /** @defgroup HCD_PHY_Module
+ * @{
+ */
+#define HCD_PHY_ULPI 1
+#define HCD_PHY_EMBEDDED 2
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup HCD_Interrupt_Clock
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+#define __HAL_HCD_ENABLE(__HANDLE__) USB_EnableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_HCD_DISABLE(__HANDLE__) USB_DisableGlobalInt ((__HANDLE__)->Instance)
+
+
+#define __HAL_HCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_HCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__))
+#define __HAL_HCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0)
+
+
+#define __HAL_HCD_CLEAR_HC_INT(chnum, __INTERRUPT__) (USBx_HC(chnum)->HCINT = (__INTERRUPT__))
+#define __HAL_HCD_MASK_HALT_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_CHHM)
+#define __HAL_HCD_UNMASK_HALT_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_CHHM)
+#define __HAL_HCD_MASK_ACK_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_ACKM)
+#define __HAL_HCD_UNMASK_ACK_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_ACKM)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_HCD_Init(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_DeInit (HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd,
+ uint8_t ch_num,
+ uint8_t epnum,
+ uint8_t dev_address,
+ uint8_t speed,
+ uint8_t ep_type,
+ uint16_t mps);
+
+HAL_StatusTypeDef HAL_HCD_HC_Halt(HCD_HandleTypeDef *hhcd,
+ uint8_t ch_num);
+
+void HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd);
+
+/* I/O operation functions *****************************************************/
+HAL_StatusTypeDef HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd,
+ uint8_t pipe,
+ uint8_t direction ,
+ uint8_t ep_type,
+ uint8_t token,
+ uint8_t* pbuff,
+ uint16_t length,
+ uint8_t do_ping);
+
+ /* Non-Blocking mode: Interrupt */
+void HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd);
+void HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd,
+ uint8_t chnum,
+ HCD_URBStateTypeDef urb_state);
+
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_HCD_ResetPort(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_Start(HCD_HandleTypeDef *hhcd);
+HAL_StatusTypeDef HAL_HCD_Stop(HCD_HandleTypeDef *hhcd);
+
+/* Peripheral State functions **************************************************/
+HCD_StateTypeDef HAL_HCD_GetState(HCD_HandleTypeDef *hhcd);
+HCD_URBStateTypeDef HAL_HCD_HC_GetURBState(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+uint32_t HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+HCD_HCStateTypeDef HAL_HCD_HC_GetState(HCD_HandleTypeDef *hhcd, uint8_t chnum);
+uint32_t HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd);
+uint32_t HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_HCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_i2c.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,461 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2c.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of I2C HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_I2C_H
+#define __STM32F4xx_HAL_I2C_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2C
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief I2C Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockSpeed; /*!< Specifies the clock frequency.
+ This parameter must be set to a value lower than 400kHz */
+
+ uint32_t DutyCycle; /*!< Specifies the I2C fast mode duty cycle.
+ This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */
+
+ uint32_t OwnAddress1; /*!< Specifies the first device own address.
+ This parameter can be a 7-bit or 10-bit address. */
+
+ uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
+ This parameter can be a value of @ref I2C_addressing_mode */
+
+ uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
+ This parameter can be a value of @ref I2C_dual_addressing_mode */
+
+ uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
+ This parameter can be a 7-bit address. */
+
+ uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
+ This parameter can be a value of @ref I2C_general_call_addressing_mode */
+
+ uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
+ This parameter can be a value of @ref I2C_nostretch_mode */
+
+}I2C_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_I2C_STATE_RESET = 0x00, /*!< I2C not yet initialized or disabled */
+ HAL_I2C_STATE_READY = 0x01, /*!< I2C initialized and ready for use */
+ HAL_I2C_STATE_BUSY = 0x02, /*!< I2C internal process is ongoing */
+ HAL_I2C_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_I2C_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_I2C_STATE_MEM_BUSY_TX = 0x32, /*!< Memory Data Transmission process is ongoing */
+ HAL_I2C_STATE_MEM_BUSY_RX = 0x42, /*!< Memory Data Reception process is ongoing */
+ HAL_I2C_STATE_TIMEOUT = 0x03, /*!< I2C timeout state */
+ HAL_I2C_STATE_ERROR = 0x04 /*!< I2C error state */
+
+}HAL_I2C_StateTypeDef;
+
+/**
+ * @brief HAL I2C Error Code structure definition
+ */
+typedef enum
+{
+ HAL_I2C_ERROR_NONE = 0x00, /*!< No error */
+ HAL_I2C_ERROR_BERR = 0x01, /*!< BERR error */
+ HAL_I2C_ERROR_ARLO = 0x02, /*!< ARLO error */
+ HAL_I2C_ERROR_AF = 0x04, /*!< AF error */
+ HAL_I2C_ERROR_OVR = 0x08, /*!< OVR error */
+ HAL_I2C_ERROR_DMA = 0x10, /*!< DMA transfer error */
+ HAL_I2C_ERROR_TIMEOUT = 0x20 /*!< Timeout error */
+
+}HAL_I2C_ErrorTypeDef;
+
+/**
+ * @brief I2C handle Structure definition
+ */
+typedef struct
+{
+ I2C_TypeDef *Instance; /*!< I2C registers base address */
+
+ I2C_InitTypeDef Init; /*!< I2C communication parameters */
+
+ uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */
+
+ uint16_t XferSize; /*!< I2C transfer size */
+
+ __IO uint16_t XferCount; /*!< I2C transfer counter */
+
+ DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< I2C locking object */
+
+ __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */
+
+ __IO HAL_I2C_ErrorTypeDef ErrorCode; /* I2C Error code */
+
+}I2C_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Constants
+ * @{
+ */
+
+/** @defgroup I2C_duty_cycle_in_fast_mode
+ * @{
+ */
+#define I2C_DUTYCYCLE_2 ((uint32_t)0x00000000)
+#define I2C_DUTYCYCLE_16_9 I2C_CCR_DUTY
+
+#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DUTYCYCLE_2) || \
+ ((CYCLE) == I2C_DUTYCYCLE_16_9))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_addressing_mode
+ * @{
+ */
+#define I2C_ADDRESSINGMODE_7BIT ((uint32_t)0x00004000)
+#define I2C_ADDRESSINGMODE_10BIT (I2C_OAR1_ADDMODE | ((uint32_t)0x00004000))
+
+#define IS_I2C_ADDRESSING_MODE(ADDRESS) (((ADDRESS) == I2C_ADDRESSINGMODE_7BIT) || \
+ ((ADDRESS) == I2C_ADDRESSINGMODE_10BIT))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_dual_addressing_mode
+ * @{
+ */
+#define I2C_DUALADDRESS_DISABLED ((uint32_t)0x00000000)
+#define I2C_DUALADDRESS_ENABLED I2C_OAR2_ENDUAL
+
+#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLED) || \
+ ((ADDRESS) == I2C_DUALADDRESS_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_general_call_addressing_mode
+ * @{
+ */
+#define I2C_GENERALCALL_DISABLED ((uint32_t)0x00000000)
+#define I2C_GENERALCALL_ENABLED I2C_CR1_ENGC
+
+#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLED) || \
+ ((CALL) == I2C_GENERALCALL_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_nostretch_mode
+ * @{
+ */
+#define I2C_NOSTRETCH_DISABLED ((uint32_t)0x00000000)
+#define I2C_NOSTRETCH_ENABLED I2C_CR1_NOSTRETCH
+
+#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLED) || \
+ ((STRETCH) == I2C_NOSTRETCH_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Memory_Address_Size
+ * @{
+ */
+#define I2C_MEMADD_SIZE_8BIT ((uint32_t)0x00000001)
+#define I2C_MEMADD_SIZE_16BIT ((uint32_t)0x00000010)
+
+#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
+ ((SIZE) == I2C_MEMADD_SIZE_16BIT))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Interrupt_configuration_definition
+ * @{
+ */
+#define I2C_IT_BUF I2C_CR2_ITBUFEN
+#define I2C_IT_EVT I2C_CR2_ITEVTEN
+#define I2C_IT_ERR I2C_CR2_ITERREN
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Flag_definition
+ * @{
+ */
+#define I2C_FLAG_SMBALERT ((uint32_t)0x00018000)
+#define I2C_FLAG_TIMEOUT ((uint32_t)0x00014000)
+#define I2C_FLAG_PECERR ((uint32_t)0x00011000)
+#define I2C_FLAG_OVR ((uint32_t)0x00010800)
+#define I2C_FLAG_AF ((uint32_t)0x00010400)
+#define I2C_FLAG_ARLO ((uint32_t)0x00010200)
+#define I2C_FLAG_BERR ((uint32_t)0x00010100)
+#define I2C_FLAG_TXE ((uint32_t)0x00010080)
+#define I2C_FLAG_RXNE ((uint32_t)0x00010040)
+#define I2C_FLAG_STOPF ((uint32_t)0x00010010)
+#define I2C_FLAG_ADD10 ((uint32_t)0x00010008)
+#define I2C_FLAG_BTF ((uint32_t)0x00010004)
+#define I2C_FLAG_ADDR ((uint32_t)0x00010002)
+#define I2C_FLAG_SB ((uint32_t)0x00010001)
+#define I2C_FLAG_DUALF ((uint32_t)0x00100080)
+#define I2C_FLAG_SMBHOST ((uint32_t)0x00100040)
+#define I2C_FLAG_SMBDEFAULT ((uint32_t)0x00100020)
+#define I2C_FLAG_GENCALL ((uint32_t)0x00100010)
+#define I2C_FLAG_TRA ((uint32_t)0x00100004)
+#define I2C_FLAG_BUSY ((uint32_t)0x00100002)
+#define I2C_FLAG_MSL ((uint32_t)0x00100001)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset I2C handle state
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @retval None
+ */
+#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
+
+/** @brief Enable or disable the specified I2C interrupts.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg I2C_IT_BUF: Buffer interrupt enable
+ * @arg I2C_IT_EVT: Event interrupt enable
+ * @arg I2C_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+
+#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__)))
+
+/** @brief Checks if the specified I2C interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __INTERRUPT__: specifies the I2C interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2C_IT_BUF: Buffer interrupt enable
+ * @arg I2C_IT_EVT: Event interrupt enable
+ * @arg I2C_IT_ERR: Error interrupt enable
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified I2C flag is set or not.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2C_FLAG_SMBALERT: SMBus Alert flag
+ * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag
+ * @arg I2C_FLAG_PECERR: PEC error in reception flag
+ * @arg I2C_FLAG_OVR: Overrun/Underrun flag
+ * @arg I2C_FLAG_AF: Acknowledge failure flag
+ * @arg I2C_FLAG_ARLO: Arbitration lost flag
+ * @arg I2C_FLAG_BERR: Bus error flag
+ * @arg I2C_FLAG_TXE: Data register empty flag
+ * @arg I2C_FLAG_RXNE: Data register not empty flag
+ * @arg I2C_FLAG_STOPF: Stop detection flag
+ * @arg I2C_FLAG_ADD10: 10-bit header sent flag
+ * @arg I2C_FLAG_BTF: Byte transfer finished flag
+ * @arg I2C_FLAG_ADDR: Address sent flag
+ * Address matched flag
+ * @arg I2C_FLAG_SB: Start bit flag
+ * @arg I2C_FLAG_DUALF: Dual flag
+ * @arg I2C_FLAG_SMBHOST: SMBus host header
+ * @arg I2C_FLAG_SMBDEFAULT: SMBus default header
+ * @arg I2C_FLAG_GENCALL: General call header flag
+ * @arg I2C_FLAG_TRA: Transmitter/Receiver flag
+ * @arg I2C_FLAG_BUSY: Bus busy flag
+ * @arg I2C_FLAG_MSL: Master/Slave flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define I2C_FLAG_MASK ((uint32_t)0x0000FFFF)
+#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 16)) == 0x01)?((((__HANDLE__)->Instance->SR1) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)): \
+ ((((__HANDLE__)->Instance->SR2) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)))
+
+/** @brief Clears the I2C pending flags which are cleared by writing 0 in a specific bit.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg I2C_FLAG_SMBALERT: SMBus Alert flag
+ * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag
+ * @arg I2C_FLAG_PECERR: PEC error in reception flag
+ * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode)
+ * @arg I2C_FLAG_AF: Acknowledge failure flag
+ * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode)
+ * @arg I2C_FLAG_BERR: Bus error flag
+ * @retval None
+ */
+#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR1 = ~((__FLAG__) & I2C_FLAG_MASK))
+
+/** @brief Clears the I2C ADDR pending flag.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @retval None
+ */
+
+#define __HAL_I2C_CLEAR_ADDRFLAG(__HANDLE__) do{(__HANDLE__)->Instance->SR1;\
+ (__HANDLE__)->Instance->SR2;}while(0)
+
+/** @brief Clears the I2C STOPF pending flag.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral.
+ * @retval None
+ */
+#define __HAL_I2C_CLEAR_STOPFLAG(__HANDLE__) do{(__HANDLE__)->Instance->SR1;\
+ (__HANDLE__)->Instance->CR1 |= I2C_CR1_PE;}while(0)
+
+#define __HAL_I2C_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= I2C_CR1_PE)
+#define __HAL_I2C_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~I2C_CR1_PE)
+
+#define __HAL_I2C_FREQRANGE(__PCLK__) ((__PCLK__)/1000000)
+#define __HAL_I2C_RISE_TIME(__FREQRANGE__, __SPEED__) (((__SPEED__) <= 100000) ? ((__FREQRANGE__) + 1) : ((((__FREQRANGE__) * 300) / 1000) + 1))
+#define __HAL_I2C_SPEED_STANDARD(__PCLK__, __SPEED__) (((((__PCLK__)/((__SPEED__) << 1)) & I2C_CCR_CCR) < 4)? 4:((__PCLK__) / ((__SPEED__) << 1)))
+#define __HAL_I2C_SPEED_FAST(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__DUTYCYCLE__) == I2C_DUTYCYCLE_2)? ((__PCLK__) / ((__SPEED__) * 3)) : (((__PCLK__) / ((__SPEED__) * 25)) | I2C_DUTYCYCLE_16_9))
+#define __HAL_I2C_SPEED(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__SPEED__) <= 100000)? (__HAL_I2C_SPEED_STANDARD((__PCLK__), (__SPEED__))) : \
+ ((__HAL_I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__)) & I2C_CCR_CCR) == 0)? 1 : \
+ ((__HAL_I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__))) | I2C_CCR_FS))
+
+#define __HAL_I2C_7BIT_ADD_WRITE(__ADDRESS__) ((uint8_t)((__ADDRESS__) & (~I2C_OAR1_ADD0)))
+#define __HAL_I2C_7BIT_ADD_READ(__ADDRESS__) ((uint8_t)((__ADDRESS__) | I2C_OAR1_ADD0))
+
+#define __HAL_I2C_10BIT_ADDRESS(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FF))))
+#define __HAL_I2C_10BIT_HEADER_WRITE(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300))) >> 7) | (uint16_t)(0xF0))))
+#define __HAL_I2C_10BIT_HEADER_READ(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300))) >> 7) | (uint16_t)(0xF1))))
+
+#define __HAL_I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00))) >> 8)))
+#define __HAL_I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FF))))
+
+#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) > 0) && ((SPEED) <= 400000))
+#define IS_I2C_OWN_ADDRESS1(ADDRESS1) (((ADDRESS1) & (uint32_t)(0xFFFFFC00)) == 0)
+#define IS_I2C_OWN_ADDRESS2(ADDRESS2) (((ADDRESS2) & (uint32_t)(0xFFFFFF01)) == 0)
+
+/* Include I2C HAL Extension module */
+#include "stm32f4xx_hal_i2c_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DeInit (I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
+
+/* I/O operation functions *****************************************************/
+/******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+
+/******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+/******* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
+
+/* Peripheral Control and State functions **************************************/
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
+uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_I2C_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_i2c_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,112 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2c_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of I2C HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_I2C_EX_H
+#define __STM32F4xx_HAL_I2C_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2CEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2CEx_Exported_Constants
+ * @{
+ */
+
+/** @defgroup I2CEx_Analog_Filter
+ * @{
+ */
+#define I2C_ANALOGFILTER_ENABLED ((uint32_t)0x00000000)
+#define I2C_ANALOGFILTER_DISABLED I2C_FLTR_ANOFF
+
+#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLED) || \
+ ((FILTER) == I2C_ANALOGFILTER_DISABLED))
+/**
+ * @}
+ */
+
+/** @defgroup I2CEx_Digital_Filter
+ * @{
+ */
+#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_I2CEx_AnalogFilter_Config(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter);
+HAL_StatusTypeDef HAL_I2CEx_DigitalFilter_Config(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter);
+
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F429xx || STM32F437xx || STM32F439xx || STM32F401xC || STM32F401xE */
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_I2C_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_i2s.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,445 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2s.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of I2S HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_I2S_H
+#define __STM32F4xx_HAL_I2S_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2S
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/**
+ * @brief I2S Init structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Specifies the I2S operating mode.
+ This parameter can be a value of @ref I2S_Mode */
+
+ uint32_t Standard; /*!< Specifies the standard used for the I2S communication.
+ This parameter can be a value of @ref I2S_Standard */
+
+ uint32_t DataFormat; /*!< Specifies the data format for the I2S communication.
+ This parameter can be a value of @ref I2S_Data_Format */
+
+ uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not.
+ This parameter can be a value of @ref I2S_MCLK_Output */
+
+ uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication.
+ This parameter can be a value of @ref I2S_Audio_Frequency */
+
+ uint32_t CPOL; /*!< Specifies the idle state of the I2S clock.
+ This parameter can be a value of @ref I2S_Clock_Polarity */
+
+ uint32_t ClockSource; /*!< Specifies the I2S Clock Source.
+ This parameter can be a value of @ref I2S_Clock_Source */
+
+ uint32_t FullDuplexMode; /*!< Specifies the I2S FullDuplex mode.
+ This parameter can be a value of @ref I2S_FullDuplex_Mode */
+
+}I2S_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_I2S_STATE_RESET = 0x00, /*!< I2S not yet initialized or disabled */
+ HAL_I2S_STATE_READY = 0x01, /*!< I2S initialized and ready for use */
+ HAL_I2S_STATE_BUSY = 0x02, /*!< I2S internal process is ongoing */
+ HAL_I2S_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_I2S_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_I2S_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_I2S_STATE_TIMEOUT = 0x03, /*!< I2S timeout state */
+ HAL_I2S_STATE_ERROR = 0x04 /*!< I2S error state */
+
+}HAL_I2S_StateTypeDef;
+
+/**
+ * @brief HAL I2S Error Code structure definition
+ */
+typedef enum
+{
+ HAL_I2S_ERROR_NONE = 0x00, /*!< No error */
+ HAL_I2S_ERROR_UDR = 0x01, /*!< I2S Underrun error */
+ HAL_I2S_ERROR_OVR = 0x02, /*!< I2S Overrun error */
+ HAL_I2SEX_ERROR_UDR = 0x04, /*!< I2S extended Underrun error */
+ HAL_I2SEX_ERROR_OVR = 0x08, /*!< I2S extended Overrun error */
+ HAL_I2S_ERROR_FRE = 0x10, /*!< I2S Frame format error */
+ HAL_I2S_ERROR_DMA = 0x20 /*!< DMA transfer error */
+}HAL_I2S_ErrorTypeDef;
+
+/**
+ * @brief I2S handle Structure definition
+ */
+typedef struct
+{
+ SPI_TypeDef *Instance; /* I2S registers base address */
+
+ I2S_InitTypeDef Init; /* I2S communication parameters */
+
+ uint16_t *pTxBuffPtr; /* Pointer to I2S Tx transfer buffer */
+
+ __IO uint16_t TxXferSize; /* I2S Tx transfer size */
+
+ __IO uint16_t TxXferCount; /* I2S Tx transfer Counter */
+
+ uint16_t *pRxBuffPtr; /* Pointer to I2S Rx transfer buffer */
+
+ __IO uint16_t RxXferSize; /* I2S Rx transfer size */
+
+ __IO uint16_t RxXferCount; /* I2S Rx transfer counter */
+
+ DMA_HandleTypeDef *hdmatx; /* I2S Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* I2S Rx DMA handle parameters */
+
+ __IO HAL_LockTypeDef Lock; /* I2S locking object */
+
+ __IO HAL_I2S_StateTypeDef State; /* I2S communication state */
+
+ __IO HAL_I2S_ErrorTypeDef ErrorCode; /* I2S Error code */
+
+}I2S_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2S_Exported_Constants
+ * @{
+ */
+#define I2SxEXT(__INSTANCE__) ((__INSTANCE__) == (SPI2)? (SPI_TypeDef *)(I2S2ext_BASE): (SPI_TypeDef *)(I2S3ext_BASE))
+
+/** @defgroup I2S_Clock_Source
+ * @{
+ */
+#define I2S_CLOCK_PLL ((uint32_t)0x00000000)
+#define I2S_CLOCK_EXTERNAL ((uint32_t)0x00000001)
+
+#define IS_I2S_CLOCKSOURCE(CLOCK) (((CLOCK) == I2S_CLOCK_EXTERNAL) || \
+ ((CLOCK) == I2S_CLOCK_PLL))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Mode
+ * @{
+ */
+#define I2S_MODE_SLAVE_TX ((uint32_t)0x00000000)
+#define I2S_MODE_SLAVE_RX ((uint32_t)0x00000100)
+#define I2S_MODE_MASTER_TX ((uint32_t)0x00000200)
+#define I2S_MODE_MASTER_RX ((uint32_t)0x00000300)
+
+#define IS_I2S_MODE(MODE) (((MODE) == I2S_MODE_SLAVE_TX) || \
+ ((MODE) == I2S_MODE_SLAVE_RX) || \
+ ((MODE) == I2S_MODE_MASTER_TX) || \
+ ((MODE) == I2S_MODE_MASTER_RX))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Standard
+ * @{
+ */
+#define I2S_STANDARD_PHILIPS ((uint32_t)0x00000000)
+#define I2S_STANDARD_MSB ((uint32_t)0x00000010)
+#define I2S_STANDARD_LSB ((uint32_t)0x00000020)
+#define I2S_STANDARD_PCM_SHORT ((uint32_t)0x00000030)
+#define I2S_STANDARD_PCM_LONG ((uint32_t)0x000000B0)
+
+#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_STANDARD_PHILIPS) || \
+ ((STANDARD) == I2S_STANDARD_MSB) || \
+ ((STANDARD) == I2S_STANDARD_LSB) || \
+ ((STANDARD) == I2S_STANDARD_PCM_SHORT) || \
+ ((STANDARD) == I2S_STANDARD_PCM_LONG))
+/** @defgroup I2S_Legacy
+ * @{
+ */
+#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Data_Format
+ * @{
+ */
+#define I2S_DATAFORMAT_16B ((uint32_t)0x00000000)
+#define I2S_DATAFORMAT_16B_EXTENDED ((uint32_t)0x00000001)
+#define I2S_DATAFORMAT_24B ((uint32_t)0x00000003)
+#define I2S_DATAFORMAT_32B ((uint32_t)0x00000005)
+
+#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DATAFORMAT_16B) || \
+ ((FORMAT) == I2S_DATAFORMAT_16B_EXTENDED) || \
+ ((FORMAT) == I2S_DATAFORMAT_24B) || \
+ ((FORMAT) == I2S_DATAFORMAT_32B))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_MCLK_Output
+ * @{
+ */
+#define I2S_MCLKOUTPUT_ENABLE ((uint32_t)SPI_I2SPR_MCKOE)
+#define I2S_MCLKOUTPUT_DISABLE ((uint32_t)0x00000000)
+
+#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOUTPUT_ENABLE) || \
+ ((OUTPUT) == I2S_MCLKOUTPUT_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Audio_Frequency
+ * @{
+ */
+#define I2S_AUDIOFREQ_192K ((uint32_t)192000)
+#define I2S_AUDIOFREQ_96K ((uint32_t)96000)
+#define I2S_AUDIOFREQ_48K ((uint32_t)48000)
+#define I2S_AUDIOFREQ_44K ((uint32_t)44100)
+#define I2S_AUDIOFREQ_32K ((uint32_t)32000)
+#define I2S_AUDIOFREQ_22K ((uint32_t)22050)
+#define I2S_AUDIOFREQ_16K ((uint32_t)16000)
+#define I2S_AUDIOFREQ_11K ((uint32_t)11025)
+#define I2S_AUDIOFREQ_8K ((uint32_t)8000)
+#define I2S_AUDIOFREQ_DEFAULT ((uint32_t)2)
+
+#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AUDIOFREQ_8K) && \
+ ((FREQ) <= I2S_AUDIOFREQ_192K)) || \
+ ((FREQ) == I2S_AUDIOFREQ_DEFAULT))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_FullDuplex_Mode
+ * @{
+ */
+#define I2S_FULLDUPLEXMODE_DISABLE ((uint32_t)0x00000000)
+#define I2S_FULLDUPLEXMODE_ENABLE ((uint32_t)0x00000001)
+
+#define IS_I2S_FULLDUPLEX_MODE(MODE) (((MODE) == I2S_FULLDUPLEXMODE_DISABLE) || \
+ ((MODE) == I2S_FULLDUPLEXMODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Clock_Polarity
+ * @{
+ */
+#define I2S_CPOL_LOW ((uint32_t)0x00000000)
+#define I2S_CPOL_HIGH ((uint32_t)SPI_I2SCFGR_CKPOL)
+
+#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_LOW) || \
+ ((CPOL) == I2S_CPOL_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Interrupt_configuration_definition
+ * @{
+ */
+#define I2S_IT_TXE SPI_CR2_TXEIE
+#define I2S_IT_RXNE SPI_CR2_RXNEIE
+#define I2S_IT_ERR SPI_CR2_ERRIE
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Flag_definition
+ * @{
+ */
+#define I2S_FLAG_TXE SPI_SR_TXE
+#define I2S_FLAG_RXNE SPI_SR_RXNE
+
+#define I2S_FLAG_UDR SPI_SR_UDR
+#define I2S_FLAG_OVR SPI_SR_OVR
+#define I2S_FLAG_FRE SPI_SR_FRE
+
+#define I2S_FLAG_CHSIDE SPI_SR_CHSIDE
+#define I2S_FLAG_BSY SPI_SR_BSY
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+
+/** @brief Reset I2S handle state
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET)
+
+/** @brief Enable or disable the specified SPI peripheral (in I2S mode).
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR |= SPI_I2SCFGR_I2SE)
+#define __HAL_I2S_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR &= ~SPI_I2SCFGR_I2SE)
+
+/** @brief Enable or disable the specified I2S interrupts.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= ~(__INTERRUPT__))
+
+/** @brief Checks if the specified I2S interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral.
+ * @param __INTERRUPT__: specifies the I2S interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified I2S flag is set or not.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_FLAG_RXNE: Receive buffer not empty flag
+ * @arg I2S_FLAG_TXE: Transmit buffer empty flag
+ * @arg I2S_FLAG_UDR: Underrun flag
+ * @arg I2S_FLAG_OVR: Overrun flag
+ * @arg I2S_FLAG_FRE: Frame error flag
+ * @arg I2S_FLAG_CHSIDE: Channel Side flag
+ * @arg I2S_FLAG_BSY: Busy flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the I2S OVR pending flag.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) do{(__HANDLE__)->Instance->DR;\
+ (__HANDLE__)->Instance->SR;}while(0)
+/** @brief Clears the I2S UDR pending flag.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__)((__HANDLE__)->Instance->SR)
+
+/* Include I2S Extension module */
+#include "stm32f4xx_hal_i2s_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DeInit (I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s);
+
+/* I/O operation functions *****************************************************/
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s);
+
+/* Peripheral Control and State functions **************************************/
+HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s);
+HAL_I2S_ErrorTypeDef HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
+
+/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
+void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s);
+
+void I2S_DMATxCplt(DMA_HandleTypeDef *hdma);
+void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
+void I2S_DMARxCplt(DMA_HandleTypeDef *hdma);
+void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
+void I2S_DMAError(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, uint32_t Status, uint32_t Timeout);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_I2S_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_i2s_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,86 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_i2s_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of I2S HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_I2S_EX_H
+#define __STM32F4xx_HAL_I2S_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2SEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/* Extended features functions **************************************************/
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size, uint32_t Timeout);
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size);
+
+HAL_StatusTypeDef I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_I2S_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_irda.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,443 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_irda.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of IRDA HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_IRDA_H
+#define __STM32F4xx_HAL_IRDA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup IRDA
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief IRDA Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate.
+ The baud rate is computed using the following formula:
+ - IntegerDivider = ((PCLKx) / (8 * (hirda->Init.BaudRate)))
+ - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref IRDA_Word_Length */
+
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref IRDA_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref IRDA_Mode */
+
+ uint8_t Prescaler; /*!< Specifies the Prescaler */
+
+ uint32_t IrDAMode; /*!< Specifies the IrDA mode
+ This parameter can be a value of @ref IrDA_Low_Power */
+}IRDA_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_IRDA_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */
+ HAL_IRDA_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_IRDA_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_IRDA_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_IRDA_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_IRDA_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_IRDA_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_IRDA_STATE_ERROR = 0x04 /*!< Error */
+}HAL_IRDA_StateTypeDef;
+
+/**
+ * @brief HAL IRDA Error Code structure definition
+ */
+typedef enum
+{
+ HAL_IRDA_ERROR_NONE = 0x00, /*!< No error */
+ HAL_IRDA_ERROR_PE = 0x01, /*!< Parity error */
+ HAL_IRDA_ERROR_NE = 0x02, /*!< Noise error */
+ HAL_IRDA_ERROR_FE = 0x04, /*!< frame error */
+ HAL_IRDA_ERROR_ORE = 0x08, /*!< Overrun error */
+ HAL_IRDA_ERROR_DMA = 0x10 /*!< DMA transfer error */
+}HAL_IRDA_ErrorTypeDef;
+
+/**
+ * @brief IRDA handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /* USART registers base address */
+
+ IRDA_InitTypeDef Init; /* IRDA communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to IRDA Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* IRDA Tx Transfer size */
+
+ uint16_t TxXferCount; /* IRDA Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to IRDA Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* IRDA Rx Transfer size */
+
+ uint16_t RxXferCount; /* IRDA Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /* IRDA Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* IRDA Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ __IO HAL_IRDA_StateTypeDef State; /* IRDA communication state */
+
+ __IO HAL_IRDA_ErrorTypeDef ErrorCode; /* IRDA Error code */
+
+}IRDA_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Constants
+ * @{
+ */
+
+/** @defgroup IRDA_Word_Length
+ * @{
+ */
+#define IRDA_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define IRDA_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+#define IS_IRDA_WORD_LENGTH(LENGTH) (((LENGTH) == IRDA_WORDLENGTH_8B) || \
+ ((LENGTH) == IRDA_WORDLENGTH_9B))
+/**
+ * @}
+ */
+
+
+/** @defgroup IRDA_Parity
+ * @{
+ */
+#define IRDA_PARITY_NONE ((uint32_t)0x00000000)
+#define IRDA_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define IRDA_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+#define IS_IRDA_PARITY(PARITY) (((PARITY) == IRDA_PARITY_NONE) || \
+ ((PARITY) == IRDA_PARITY_EVEN) || \
+ ((PARITY) == IRDA_PARITY_ODD))
+/**
+ * @}
+ */
+
+
+/** @defgroup IRDA_Mode
+ * @{
+ */
+#define IRDA_MODE_RX ((uint32_t)USART_CR1_RE)
+#define IRDA_MODE_TX ((uint32_t)USART_CR1_TE)
+#define IRDA_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_IRDA_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3) == 0x00) && ((MODE) != (uint32_t)0x000000))
+/**
+ * @}
+ */
+
+/** @defgroup IrDA_Low_Power
+ * @{
+ */
+#define IRDA_POWERMODE_LOWPOWER ((uint32_t)USART_CR3_IRLP)
+#define IRDA_POWERMODE_NORMAL ((uint32_t)0x00000000)
+#define IS_IRDA_POWERMODE(MODE) (((MODE) == IRDA_POWERMODE_LOWPOWER) || \
+ ((MODE) == IRDA_POWERMODE_NORMAL))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the SR register
+ * @{
+ */
+#define IRDA_FLAG_TXE ((uint32_t)0x00000080)
+#define IRDA_FLAG_TC ((uint32_t)0x00000040)
+#define IRDA_FLAG_RXNE ((uint32_t)0x00000020)
+#define IRDA_FLAG_IDLE ((uint32_t)0x00000010)
+#define IRDA_FLAG_ORE ((uint32_t)0x00000008)
+#define IRDA_FLAG_NE ((uint32_t)0x00000004)
+#define IRDA_FLAG_FE ((uint32_t)0x00000002)
+#define IRDA_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Interrupt_definition
+ * Elements values convention: 0xY000XXXX
+ * - XXXX : Interrupt mask in the XX register
+ * - Y : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ *
+ * @{
+ */
+
+#define IRDA_IT_PE ((uint32_t)0x10000100)
+#define IRDA_IT_TXE ((uint32_t)0x10000080)
+#define IRDA_IT_TC ((uint32_t)0x10000040)
+#define IRDA_IT_RXNE ((uint32_t)0x10000020)
+#define IRDA_IT_IDLE ((uint32_t)0x10000010)
+
+#define IRDA_IT_LBD ((uint32_t)0x20000040)
+
+#define IRDA_IT_CTS ((uint32_t)0x30000400)
+#define IRDA_IT_ERR ((uint32_t)0x30000001)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset IRDA handle state
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IRDA_STATE_RESET)
+
+/** @brief Flushs the IRDA DR register
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ */
+#define __HAL_IRDA_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
+
+/** @brief Checks whether the specified IRDA flag is set or not.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_FLAG_TXE: Transmit data register empty flag
+ * @arg IRDA_FLAG_TC: Transmission Complete flag
+ * @arg IRDA_FLAG_RXNE: Receive data register not empty flag
+ * @arg IRDA_FLAG_IDLE: Idle Line detection flag
+ * @arg IRDA_FLAG_ORE: OverRun Error flag
+ * @arg IRDA_FLAG_NE: Noise Error flag
+ * @arg IRDA_FLAG_FE: Framing Error flag
+ * @arg IRDA_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified IRDA pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg IRDA_FLAG_TC: Transmission Complete flag.
+ * @arg IRDA_FLAG_RXNE: Receive data register not empty flag.
+ *
+ * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun
+ * error) and IDLE (Idle line detected) flags are cleared by software
+ * sequence: a read operation to USART_SR register followed by a read
+ * operation to USART_DR register.
+ * @note RXNE flag can be also cleared by a read to the USART_DR register.
+ * @note TC flag can be also cleared by software sequence: a read operation to
+ * USART_SR register followed by a write operation to USART_DR register.
+ * @note TXE flag is cleared only by a write to the USART_DR register.
+ *
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief Clear the IRDA PE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) do{(__HANDLE__)->Instance->SR;\
+ (__HANDLE__)->Instance->DR;}while(0)
+/** @brief Clear the IRDA FE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_FEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the IRDA NE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_NEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the IRDA ORE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_OREFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the IRDA IDLE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_IDLEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Enables or disables the specified IRDA interrupt.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __INTERRUPT__: specifies the IRDA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @param NewState: new state of the specified IRDA interrupt.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+#define IRDA_IT_MASK ((uint32_t)0x0000FFFF)
+#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & IRDA_IT_MASK)): \
+ (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & IRDA_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & IRDA_IT_MASK)))
+#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & IRDA_IT_MASK)): \
+ (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & IRDA_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & IRDA_IT_MASK)))
+
+/** @brief Checks whether the specified IRDA interrupt has occurred or not.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __IT__: specifies the IRDA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ERR: Error interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == 1)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28) == 2)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & IRDA_IT_MASK))
+
+
+
+#define __IRDA_ENABLE(__HANDLE__) ( (__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+#define __IRDA_DISABLE(__HANDLE__) ( (__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+#define __DIV(_PCLK_, _BAUD_) (((_PCLK_)*25)/(4*(_BAUD_)))
+#define __DIVMANT(_PCLK_, _BAUD_) (__DIV((_PCLK_), (_BAUD_))/100)
+#define __DIVFRAQ(_PCLK_, _BAUD_) (((__DIV((_PCLK_), (_BAUD_)) - (__DIVMANT((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100)
+#define __IRDA_BRR(_PCLK_, _BAUD_) ((__DIVMANT((_PCLK_), (_BAUD_)) << 4)|(__DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0F))
+
+#define IS_IRDA_BAUDRATE(BAUDRATE) ((BAUDRATE) < 115201)
+
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda);
+
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda);
+
+/* Peripheral State functions **************************************************/
+HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda);
+uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_IRDA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_iwdg.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,248 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_iwdg.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of IWDG HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_IWDG_H
+#define __STM32F4xx_HAL_IWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup IWDG
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief IWDG HAL State Structure definition
+ */
+typedef enum
+{
+ HAL_IWDG_STATE_RESET = 0x00, /*!< IWDG not yet initialized or disabled */
+ HAL_IWDG_STATE_READY = 0x01, /*!< IWDG initialized and ready for use */
+ HAL_IWDG_STATE_BUSY = 0x02, /*!< IWDG internal process is ongoing */
+ HAL_IWDG_STATE_TIMEOUT = 0x03, /*!< IWDG timeout state */
+ HAL_IWDG_STATE_ERROR = 0x04 /*!< IWDG error state */
+
+}HAL_IWDG_StateTypeDef;
+
+/**
+ * @brief IWDG Init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Select the prescaler of the IWDG.
+ This parameter can be a value of @ref IWDG_Prescaler */
+
+ uint32_t Reload; /*!< Specifies the IWDG down-counter reload value.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
+
+}IWDG_InitTypeDef;
+
+/**
+ * @brief IWDG handle Structure definition
+ */
+typedef struct
+{
+ IWDG_TypeDef *Instance; /*!< Register base address */
+
+ IWDG_InitTypeDef Init; /*!< IWDG required parameters */
+
+ HAL_LockTypeDef Lock; /*!< IWDG locking object */
+
+ __IO HAL_IWDG_StateTypeDef State; /*!< IWDG communication state */
+
+}IWDG_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IWDG_Exported_Constants
+ * @{
+ */
+
+/** @defgroup IWDG_Registers_BitMask
+ * @{
+ */
+/* --- KR Register ---*/
+/* KR register bit mask */
+#define KR_KEY_RELOAD ((uint32_t)0xAAAA) /*!< IWDG reload counter enable */
+#define KR_KEY_ENABLE ((uint32_t)0xCCCC) /*!< IWDG peripheral enable */
+#define KR_KEY_EWA ((uint32_t)0x5555) /*!< IWDG KR write Access enable */
+#define KR_KEY_DWA ((uint32_t)0x0000) /*!< IWDG KR write Access disable */
+
+#define IS_IWDG_KR(__KR__) (((__KR__) == KR_KEY_RELOAD) || \
+ ((__KR__) == KR_KEY_ENABLE))|| \
+ ((__KR__) == KR_KEY_EWA)) || \
+ ((__KR__) == KR_KEY_DWA))
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Flag_definition
+ * @{
+ */
+#define IWDG_FLAG_PVU ((uint32_t)0x0001) /*!< Watchdog counter prescaler value update flag */
+#define IWDG_FLAG_RVU ((uint32_t)0x0002) /*!< Watchdog counter reload value update flag */
+
+#define IS_IWDG_FLAG(FLAG) (((FLAG) == IWDG_FLAG_PVU) || \
+ ((FLAG) == IWDG_FLAG_RVU))
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Prescaler
+ * @{
+ */
+#define IWDG_PRESCALER_4 ((uint8_t)0x00) /*!< IWDG prescaler set to 4 */
+#define IWDG_PRESCALER_8 ((uint8_t)(IWDG_PR_PR_0)) /*!< IWDG prescaler set to 8 */
+#define IWDG_PRESCALER_16 ((uint8_t)(IWDG_PR_PR_1)) /*!< IWDG prescaler set to 16 */
+#define IWDG_PRESCALER_32 ((uint8_t)(IWDG_PR_PR_1 | IWDG_PR_PR_0)) /*!< IWDG prescaler set to 32 */
+#define IWDG_PRESCALER_64 ((uint8_t)(IWDG_PR_PR_2)) /*!< IWDG prescaler set to 64 */
+#define IWDG_PRESCALER_128 ((uint8_t)(IWDG_PR_PR_2 | IWDG_PR_PR_0)) /*!< IWDG prescaler set to 128 */
+#define IWDG_PRESCALER_256 ((uint8_t)(IWDG_PR_PR_2 | IWDG_PR_PR_1)) /*!< IWDG prescaler set to 256 */
+
+
+#define IS_IWDG_PRESCALER(PRESCALER) (((PRESCALER) == IWDG_PRESCALER_4) || \
+ ((PRESCALER) == IWDG_PRESCALER_8) || \
+ ((PRESCALER) == IWDG_PRESCALER_16) || \
+ ((PRESCALER) == IWDG_PRESCALER_32) || \
+ ((PRESCALER) == IWDG_PRESCALER_64) || \
+ ((PRESCALER) == IWDG_PRESCALER_128)|| \
+ ((PRESCALER) == IWDG_PRESCALER_256))
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Reload_Value
+ * @{
+ */
+#define IS_IWDG_RELOAD(RELOAD) ((RELOAD) <= 0xFFF)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset IWDG handle state
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IWDG_STATE_RESET)
+
+/**
+ * @brief Enables the IWDG peripheral.
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_START(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, KR_KEY_ENABLE)
+
+/**
+ * @brief Reloads IWDG counter with value defined in the reload register
+ * (write access to IWDG_PR and IWDG_RLR registers disabled).
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_RELOAD_COUNTER(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, KR_KEY_RELOAD)
+
+/**
+ * @brief Enables write access to IWDG_PR and IWDG_RLR registers.
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_ENABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, KR_KEY_EWA)
+
+/**
+ * @brief Disables write access to IWDG_PR and IWDG_RLR registers.
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_DISABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, KR_KEY_DWA)
+
+/**
+ * @brief Gets the selected IWDG's flag status.
+ * @param __HANDLE__: IWDG handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg IWDG_FLAG_PVU: Watchdog counter reload value update flag
+ * @arg IWDG_FLAG_RVU: Watchdog counter prescaler value flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_IWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg);
+void HAL_IWDG_MspInit(IWDG_HandleTypeDef *hiwdg);
+
+/* I/O operation functions ****************************************************/
+HAL_StatusTypeDef HAL_IWDG_Start(IWDG_HandleTypeDef *hiwdg);
+HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg);
+
+/* Peripheral State functions ************************************************/
+HAL_IWDG_StateTypeDef HAL_IWDG_GetState(IWDG_HandleTypeDef *hiwdg);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_IWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_ltdc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,582 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_ltdc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of LTDC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_LTDC_H
+#define __STM32F4xx_HAL_LTDC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F429xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup LTDC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+#define MAX_LAYER 2
+
+/**
+ * @brief LTDC color structure definition
+ */
+typedef struct
+{
+ uint8_t Blue; /*!< Configures the blue value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint8_t Green; /*!< Configures the green value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint8_t Red; /*!< Configures the red value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint8_t Reserved; /*!< Reserved 0xFF */
+} LTDC_ColorTypeDef;
+
+/**
+ * @brief LTDC Init structure definition
+ */
+typedef struct
+{
+ uint32_t HSPolarity; /*!< configures the horizontal synchronization polarity.
+ This parameter can be one value of @ref LTDC_HS_POLARITY */
+
+ uint32_t VSPolarity; /*!< configures the vertical synchronization polarity.
+ This parameter can be one value of @ref LTDC_VS_POLARITY */
+
+ uint32_t DEPolarity; /*!< configures the data enable polarity.
+ This parameter can be one of value of @ref LTDC_DE_POLARITY */
+
+ uint32_t PCPolarity; /*!< configures the pixel clock polarity.
+ This parameter can be one of value of @ref LTDC_PC_POLARITY */
+
+ uint32_t HorizontalSync; /*!< configures the number of Horizontal synchronization width.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+ uint32_t VerticalSync; /*!< configures the number of Vertical synchronization heigh.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0x7FF. */
+
+ uint32_t AccumulatedHBP; /*!< configures the accumulated horizontal back porch width.
+ This parameter must be a number between Min_Data = LTDC_HorizontalSync and Max_Data = 0xFFF. */
+
+ uint32_t AccumulatedVBP; /*!< configures the accumulated vertical back porch heigh.
+ This parameter must be a number between Min_Data = LTDC_VerticalSync and Max_Data = 0x7FF. */
+
+ uint32_t AccumulatedActiveW; /*!< configures the accumulated active width.
+ This parameter must be a number between Min_Data = LTDC_AccumulatedHBP and Max_Data = 0xFFF. */
+
+ uint32_t AccumulatedActiveH; /*!< configures the accumulated active heigh.
+ This parameter must be a number between Min_Data = LTDC_AccumulatedVBP and Max_Data = 0x7FF. */
+
+ uint32_t TotalWidth; /*!< configures the total width.
+ This parameter must be a number between Min_Data = LTDC_AccumulatedActiveW and Max_Data = 0xFFF. */
+
+ uint32_t TotalHeigh; /*!< configures the total heigh.
+ This parameter must be a number between Min_Data = LTDC_AccumulatedActiveH and Max_Data = 0x7FF. */
+
+ LTDC_ColorTypeDef Backcolor; /*!< Configures the background color. */
+} LTDC_InitTypeDef;
+
+
+/**
+ * @brief LTDC Layer structure definition
+ */
+typedef struct
+{
+ uint32_t WindowX0; /*!< Configures the Window Horizontal Start Position.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+ uint32_t WindowX1; /*!< Configures the Window Horizontal Stop Position.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+ uint32_t WindowY0; /*!< Configures the Window vertical Start Position.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+
+ uint32_t WindowY1; /*!< Configures the Window vertical Stop Position.
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t PixelFormat; /*!< Specifies the pixel format.
+ This parameter can be one of value of @ref LTDC_Pixelformat */
+
+ uint32_t Alpha; /*!< Specifies the constant alpha used for blending.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint32_t Alpha0; /*!< Configures the default alpha value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint32_t BlendingFactor1; /*!< Select the blending factor 1.
+ This parameter can be one of value of @ref LTDC_BlendingFactor1 */
+
+ uint32_t BlendingFactor2; /*!< Select the blending factor 2.
+ This parameter can be one of value of @ref LTDC_BlendingFactor2 */
+
+ uint32_t FBStartAdress; /*!< Configures the color frame buffer address */
+
+ uint32_t ImageWidth; /*!< Configures the color frame buffer line length.
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x1FFF. */
+
+ uint32_t ImageHeight; /*!< Specifies the number of line in frame buffer.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0x7FF. */
+
+ LTDC_ColorTypeDef Backcolor; /*!< Configures the layer background color. */
+} LTDC_LayerCfgTypeDef;
+
+/**
+ * @brief HAL LTDC State structures definition
+ */
+typedef enum
+{
+ HAL_LTDC_STATE_RESET = 0x00, /*!< LTDC not yet initialized or disabled */
+ HAL_LTDC_STATE_READY = 0x01, /*!< LTDC initialized and ready for use */
+ HAL_LTDC_STATE_BUSY = 0x02, /*!< LTDC internal process is ongoing */
+ HAL_LTDC_STATE_TIMEOUT = 0x03, /*!< LTDC Timeout state */
+ HAL_LTDC_STATE_ERROR = 0x04 /*!< LTDC state error */
+}HAL_LTDC_StateTypeDef;
+
+/**
+ * @brief LTDC handle Structure definition
+ */
+typedef struct
+{
+ LTDC_TypeDef *Instance; /*!< LTDC Register base address */
+
+ LTDC_InitTypeDef Init; /*!< LTDC parameters */
+
+ LTDC_LayerCfgTypeDef LayerCfg[MAX_LAYER]; /*!< LTDC Layers parameters */
+
+ HAL_LockTypeDef Lock; /*!< LTDC Lock */
+
+ __IO HAL_LTDC_StateTypeDef State; /*!< LTDC state */
+
+ __IO uint32_t ErrorCode; /*!< LTDC Error code */
+
+} LTDC_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup LTDC_Exported_Constants
+ * @{
+ */
+
+/** @defgroup LTDC_Layer
+ * @{
+ */
+#define IS_LTDC_LAYER(LAYER) ((LAYER) <= MAX_LAYER)
+/**
+ * @}
+ */
+
+/** @defgroup LTDC Error Code
+ * @{
+ */
+#define HAL_LTDC_ERROR_NONE ((uint32_t)0x00000000) /*!< LTDC No error */
+#define HAL_LTDC_ERROR_TE ((uint32_t)0x00000001) /*!< LTDC Transfer error */
+#define HAL_LTDC_ERROR_FU ((uint32_t)0x00000002) /*!< LTDC FIFO Underrun */
+#define HAL_LTDC_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< LTDC Timeout error */
+
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_HS_POLARITY
+ * @{
+ */
+#define LTDC_HSPOLARITY_AL ((uint32_t)0x00000000) /*!< Horizontal Synchronization is active low. */
+#define LTDC_HSPOLARITY_AH LTDC_GCR_HSPOL /*!< Horizontal Synchronization is active high. */
+
+#define IS_LTDC_HSPOL(HSPOL) (((HSPOL) == LTDC_HSPOLARITY_AL) || \
+ ((HSPOL) == LTDC_HSPOLARITY_AH))
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_VS_POLARITY
+ * @{
+ */
+#define LTDC_VSPOLARITY_AL ((uint32_t)0x00000000) /*!< Vertical Synchronization is active low. */
+#define LTDC_VSPOLARITY_AH LTDC_GCR_VSPOL /*!< Vertical Synchronization is active high. */
+
+#define IS_LTDC_VSPOL(VSPOL) (((VSPOL) == LTDC_VSPOLARITY_AL) || \
+ ((VSPOL) == LTDC_VSPOLARITY_AH))
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_DE_POLARITY
+ * @{
+ */
+#define LTDC_DEPOLARITY_AL ((uint32_t)0x00000000) /*!< Data Enable, is active low. */
+#define LTDC_DEPOLARITY_AH LTDC_GCR_DEPOL /*!< Data Enable, is active high. */
+
+#define IS_LTDC_DEPOL(DEPOL) (((DEPOL) == LTDC_DEPOLARITY_AL) || \
+ ((DEPOL) == LTDC_DEPOLARITY_AH))
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_PC_POLARITY
+ * @{
+ */
+#define LTDC_PCPOLARITY_IPC ((uint32_t)0x00000000) /*!< input pixel clock. */
+#define LTDC_PCPOLARITY_IIPC LTDC_GCR_PCPOL /*!< inverted input pixel clock. */
+
+#define IS_LTDC_PCPOL(PCPOL) (((PCPOL) == LTDC_PCPOLARITY_IPC) || \
+ ((PCPOL) == LTDC_PCPOLARITY_IIPC))
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_SYNC
+ * @{
+ */
+#define LTDC_HORIZONTALSYNC (LTDC_SSCR_HSW >> 16) /*!< Horizontal synchronization width. */
+#define LTDC_VERTICALSYNC LTDC_SSCR_VSH /*!< Vertical synchronization heigh. */
+
+#define IS_LTDC_HSYNC(HSYNC) ((HSYNC) <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_VSYNC(VSYNC) ((VSYNC) <= LTDC_VERTICALSYNC)
+#define IS_LTDC_AHBP(AHBP) ((AHBP) <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_AVBP(AVBP) ((AVBP) <= LTDC_VERTICALSYNC)
+#define IS_LTDC_AAW(AAW) ((AAW) <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_AAH(AAH) ((AAH) <= LTDC_VERTICALSYNC)
+#define IS_LTDC_TOTALW(TOTALW) ((TOTALW) <= LTDC_HORIZONTALSYNC)
+#define IS_LTDC_TOTALH(TOTALH) ((TOTALH) <= LTDC_VERTICALSYNC)
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_BACK_COLOR
+ * @{
+ */
+#define LTDC_COLOR ((uint32_t)0x000000FF) /*!< Color mask */
+
+#define IS_LTDC_BLUEVALUE(BBLUE) ((BBLUE) <= LTDC_COLOR)
+#define IS_LTDC_GREENVALUE(BGREEN) ((BGREEN) <= LTDC_COLOR)
+#define IS_LTDC_REDVALUE(BRED) ((BRED) <= LTDC_COLOR)
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_BlendingFactor1
+ * @{
+ */
+#define LTDC_BLENDING_FACTOR1_CA ((uint32_t)0x00000400) /*!< Blending factor : Cte Alpha */
+#define LTDC_BLENDING_FACTOR1_PAxCA ((uint32_t)0x00000600) /*!< Blending factor : Cte Alpha x Pixel Alpha*/
+
+#define IS_LTDC_BLENDING_FACTOR1(BlendingFactor1) (((BlendingFactor1) == LTDC_BLENDING_FACTOR1_CA) || \
+ ((BlendingFactor1) == LTDC_BLENDING_FACTOR1_PAxCA))
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_BlendingFactor2
+ * @{
+ */
+#define LTDC_BLENDING_FACTOR2_CA ((uint32_t)0x00000005) /*!< Blending factor : Cte Alpha */
+#define LTDC_BLENDING_FACTOR2_PAxCA ((uint32_t)0x00000007) /*!< Blending factor : Cte Alpha x Pixel Alpha*/
+
+#define IS_LTDC_BLENDING_FACTOR2(BlendingFactor2) (((BlendingFactor2) == LTDC_BLENDING_FACTOR2_CA) || \
+ ((BlendingFactor2) == LTDC_BLENDING_FACTOR2_PAxCA))
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Pixelformat
+ * @{
+ */
+#define LTDC_PIXEL_FORMAT_ARGB8888 ((uint32_t)0x00000000) /*!< ARGB8888 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_RGB888 ((uint32_t)0x00000001) /*!< RGB888 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_RGB565 ((uint32_t)0x00000002) /*!< RGB565 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_ARGB1555 ((uint32_t)0x00000003) /*!< ARGB1555 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_ARGB4444 ((uint32_t)0x00000004) /*!< ARGB4444 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_L8 ((uint32_t)0x00000005) /*!< L8 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_AL44 ((uint32_t)0x00000006) /*!< AL44 LTDC pixel format */
+#define LTDC_PIXEL_FORMAT_AL88 ((uint32_t)0x00000007) /*!< AL88 LTDC pixel format */
+
+#define IS_LTDC_PIXEL_FORMAT(Pixelformat) (((Pixelformat) == LTDC_PIXEL_FORMAT_ARGB8888) || ((Pixelformat) == LTDC_PIXEL_FORMAT_RGB888) || \
+ ((Pixelformat) == LTDC_PIXEL_FORMAT_RGB565) || ((Pixelformat) == LTDC_PIXEL_FORMAT_ARGB1555) || \
+ ((Pixelformat) == LTDC_PIXEL_FORMAT_ARGB4444) || ((Pixelformat) == LTDC_PIXEL_FORMAT_L8) || \
+ ((Pixelformat) == LTDC_PIXEL_FORMAT_AL44) || ((Pixelformat) == LTDC_PIXEL_FORMAT_AL88))
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Alpha
+ * @{
+ */
+#define LTDC_ALPHA LTDC_LxCACR_CONSTA /*!< LTDC Cte Alpha mask */
+
+#define IS_LTDC_ALPHA(ALPHA) ((ALPHA) <= LTDC_ALPHA)
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_LAYER_Config
+ * @{
+ */
+#define LTDC_STOPPOSITION (LTDC_LxWHPCR_WHSPPOS >> 16) /*!< LTDC Layer stop position */
+#define LTDC_STARTPOSITION LTDC_LxWHPCR_WHSTPOS /*!< LTDC Layer start position */
+
+#define LTDC_COLOR_FRAME_BUFFER LTDC_LxCFBLR_CFBLL /*!< LTDC Layer Line length */
+#define LTDC_LINE_NUMBER LTDC_LxCFBLNR_CFBLNBR /*!< LTDC Layer Line number */
+
+#define IS_LTDC_HCONFIGST(HCONFIGST) ((HCONFIGST) <= LTDC_STARTPOSITION)
+#define IS_LTDC_HCONFIGSP(HCONFIGSP) ((HCONFIGSP) <= LTDC_STOPPOSITION)
+#define IS_LTDC_VCONFIGST(VCONFIGST) ((VCONFIGST) <= LTDC_STARTPOSITION)
+#define IS_LTDC_VCONFIGSP(VCONFIGSP) ((VCONFIGSP) <= LTDC_STOPPOSITION)
+
+#define IS_LTDC_CFBP(CFBP) ((CFBP) <= LTDC_COLOR_FRAME_BUFFER)
+#define IS_LTDC_CFBLL(CFBLL) ((CFBLL) <= LTDC_COLOR_FRAME_BUFFER)
+
+#define IS_LTDC_CFBLNBR(CFBLNBR) ((CFBLNBR) <= LTDC_LINE_NUMBER)
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_LIPosition
+ * @{
+ */
+#define IS_LTDC_LIPOS(LIPOS) ((LIPOS) <= 0x7FF)
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Interrupts
+ * @{
+ */
+#define LTDC_IT_LI LTDC_IER_LIE
+#define LTDC_IT_FU LTDC_IER_FUIE
+#define LTDC_IT_TE LTDC_IER_TERRIE
+#define LTDC_IT_RR LTDC_IER_RRIE
+
+#define IS_LTDC_IT(IT) ((((IT) & (uint32_t)0xFFFFFFF0) == 0x00) && ((IT) != 0x00))
+/**
+ * @}
+ */
+
+/** @defgroup LTDC_Flag
+ * @{
+ */
+#define LTDC_FLAG_LI LTDC_ISR_LIF
+#define LTDC_FLAG_FU LTDC_ISR_FUIF
+#define LTDC_FLAG_TE LTDC_ISR_TERRIF
+#define LTDC_FLAG_RR LTDC_ISR_RRIF
+
+#define IS_LTDC_FLAG(FLAG) (((FLAG) == LTDC_FLAG_LI) || ((FLAG) == LTDC_FLAG_FU) || \
+ ((FLAG) == LTDC_FLAG_TERR) || ((FLAG) == LTDC_FLAG_RR))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset LTDC handle state
+ * @param __HANDLE__: specifies the LTDC handle.
+ * @retval None
+ */
+#define __HAL_LTDC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LTDC_STATE_RESET)
+
+/**
+ * @brief Enable the LTDC.
+ * @param __HANDLE__: LTDC handle
+ * @retval None.
+ */
+#define __HAL_LTDC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->GCR |= LTDC_GCR_LTDCEN)
+
+/**
+ * @brief Disable the LTDC.
+ * @param __HANDLE__: LTDC handle
+ * @retval None.
+ */
+#define __HAL_LTDC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->GCR &= ~(LTDC_GCR_LTDCEN))
+
+/**
+ * @brief Enable the LTDC Layer.
+ * @param __HANDLE__: LTDC handle
+ * @param __LAYER__: Specify the layer to be enabled
+ This parameter can be 0 or 1
+ * @retval None.
+ */
+#define __HAL_LTDC_LAYER(__HANDLE__, __LAYER__) ((LTDC_Layer_TypeDef *)(((uint32_t)((__HANDLE__)->Instance)) + 0x84 + (0x80*(__LAYER__))))
+
+#define __HAL_LTDC_LAYER_ENABLE(__HANDLE__, __LAYER__) ((__HAL_LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR |= (uint32_t)LTDC_LxCR_LEN)
+
+/**
+ * @brief Disable the LTDC Layer.
+ * @param __HANDLE__: LTDC handle
+ * @param __LAYER__: Specify the layer to be disabled
+ This parameter can be 0 or 1
+ * @retval None.
+ */
+#define __HAL_LTDC_LAYER_DISABLE(__HANDLE__, __LAYER__) ((__HAL_LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR &= ~(uint32_t)LTDC_LxCR_LEN)
+
+/**
+ * @brief Reload Layer Configuration.
+ * @param __HANDLE__: LTDC handle
+ * @retval None.
+ */
+#define __HAL_LTDC_RELOAD_CONFIG(__HANDLE__) ((__HANDLE__)->Instance->SRCR |= LTDC_SRCR_IMR)
+
+/* Interrupt & Flag management */
+/**
+ * @brief Get the LTDC pending flags.
+ * @param __HANDLE__: LTDC handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg LTDC_FLAG_LI: Line Interrupt flag
+ * @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag
+ * @arg LTDC_FLAG_TE: Transfer Error interrupt flag
+ * @arg LTDC_FLAG_RR: Register Reload Interrupt Flag
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __HAL_LTDC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
+
+/**
+ * @brief Clears the LTDC pending flags.
+ * @param __HANDLE__: LTDC handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg LTDC_FLAG_LI: Line Interrupt flag
+ * @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag
+ * @arg LTDC_FLAG_TE: Transfer Error interrupt flag
+ * @arg LTDC_FLAG_RR: Register Reload Interrupt Flag
+ * @retval None
+ */
+#define __HAL_LTDC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/**
+ * @brief Enables the specified LTDC interrupts.
+ * @param __HANDLE__: LTDC handle
+ * @param __INTERRUPT__: specifies the LTDC interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg LTDC_IT_LI: Line Interrupt flag
+ * @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
+ * @arg LTDC_IT_TE: Transfer Error interrupt flag
+ * @arg LTDC_IT_RR: Register Reload Interrupt Flag
+ * @retval None
+ */
+#define __HAL_LTDC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified LTDC interrupts.
+ * @param __HANDLE__: LTDC handle
+ * @param __INTERRUPT__: specifies the LTDC interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg LTDC_IT_LI: Line Interrupt flag
+ * @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
+ * @arg LTDC_IT_TE: Transfer Error interrupt flag
+ * @arg LTDC_IT_RR: Register Reload Interrupt Flag
+ * @retval None
+ */
+#define __HAL_LTDC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__))
+
+/**
+ * @brief Checks whether the specified LTDC interrupt has occurred or not.
+ * @param __HANDLE__: LTDC handle
+ * @param __INTERRUPT__: specifies the LTDC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg LTDC_IT_LI: Line Interrupt flag
+ * @arg LTDC_IT_FU: FIFO Underrun Interrupt flag
+ * @arg LTDC_IT_TE: Transfer Error interrupt flag
+ * @arg LTDC_IT_RR: Register Reload Interrupt Flag
+ * @retval The state of INTERRUPT (SET or RESET).
+ */
+#define __HAL_LTDC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->ISR & (__INTERRUPT__))
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_LTDC_Init(LTDC_HandleTypeDef *hltdc);
+HAL_StatusTypeDef HAL_LTDC_DeInit(LTDC_HandleTypeDef *hltdc);
+void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc);
+void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc);
+void HAL_LTDC_ErrorCallback(LTDC_HandleTypeDef *hltdc);
+void HAL_LTDC_LineEvenCallback(LTDC_HandleTypeDef *hltdc);
+
+/* IO operation functions *****************************************************/
+void HAL_LTDC_IRQHandler(LTDC_HandleTypeDef *hltdc);
+
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_LTDC_ConfigLayer(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetWindowSize(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetWindowPosition(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetPixelFormat(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetAlpha(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_SetAddress(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_ConfigCLUT(LTDC_HandleTypeDef *hltdc, uint32_t *pCLUT, uint32_t CLUTSize, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_EnableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_DisableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_EnableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_DisableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_LTDC_ProgramLineEvent(LTDC_HandleTypeDef *hltdc, uint32_t Line);
+HAL_StatusTypeDef HAL_LTDC_EnableDither(LTDC_HandleTypeDef *hltdc);
+HAL_StatusTypeDef HAL_LTDC_DisableDither(LTDC_HandleTypeDef *hltdc);
+
+/* Peripheral State functions *************************************************/
+HAL_LTDC_StateTypeDef HAL_LTDC_GetState(LTDC_HandleTypeDef *hltdc);
+uint32_t HAL_LTDC_GetError(LTDC_HandleTypeDef *hltdc);
+
+#endif /* STM32F429xx || STM32F439xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_LTDC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_nand.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,250 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_nand.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of NAND HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_NAND_H
+#define __STM32F4xx_HAL_NAND_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+ #include "stm32f4xx_ll_fsmc.h"
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+ #include "stm32f4xx_ll_fmc.h"
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup NAND
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/* Exported typedef ----------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL NAND State structures definition
+ */
+typedef enum
+{
+ HAL_NAND_STATE_RESET = 0x00, /*!< NAND not yet initialized or disabled */
+ HAL_NAND_STATE_READY = 0x01, /*!< NAND initialized and ready for use */
+ HAL_NAND_STATE_BUSY = 0x02, /*!< NAND internal process is ongoing */
+ HAL_NAND_STATE_ERROR = 0x03 /*!< NAND error state */
+}HAL_NAND_StateTypeDef;
+
+/**
+ * @brief NAND Memory electronic signature Structure definition
+ */
+typedef struct
+{
+ /*<! NAND memory electronic signature maker and device IDs */
+
+ uint8_t Maker_Id;
+
+ uint8_t Device_Id;
+
+ uint8_t Third_Id;
+
+ uint8_t Fourth_Id;
+}NAND_IDTypeDef;
+
+/**
+ * @brief NAND Memory address Structure definition
+ */
+typedef struct
+{
+ uint16_t Page; /*!< NAND memory Page address */
+
+ uint16_t Zone; /*!< NAND memory Zone address */
+
+ uint16_t Block; /*!< NAND memory Block address */
+
+}NAND_AddressTypedef;
+
+/**
+ * @brief NAND Memory info Structure definition
+ */
+typedef struct
+{
+ uint32_t PageSize; /*!< NAND memory page (without spare area) size measured in K. bytes */
+
+ uint32_t SpareAreaSize; /*!< NAND memory spare area size measured in K. bytes */
+
+ uint32_t BlockSize; /*!< NAND memory block size number of pages */
+
+ uint32_t BlockNbr; /*!< NAND memory number of blocks */
+
+ uint32_t ZoneSize; /*!< NAND memory zone size measured in number of blocks */
+}NAND_InfoTypeDef;
+
+/**
+ * @brief NAND handle Structure definition
+ */
+typedef struct
+{
+ FMC_NAND_TypeDef *Instance; /*!< Register base address */
+
+ FMC_NAND_InitTypeDef Init; /*!< NAND device control configuration parameters */
+
+ HAL_LockTypeDef Lock; /*!< NAND locking object */
+
+ __IO HAL_NAND_StateTypeDef State; /*!< NAND device access state */
+
+ NAND_InfoTypeDef Info; /*!< NAND characteristic information structure */
+}NAND_HandleTypeDef;
+
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup NAND_Exported_Constants
+ * @{
+ */
+#define NAND_DEVICE1 ((uint32_t)0x70000000)
+#define NAND_DEVICE2 ((uint32_t)0x80000000)
+#define NAND_WRITE_TIMEOUT ((uint32_t)0x01000000)
+
+#define CMD_AREA ((uint32_t)(1<<16)) /* A16 = CLE high */
+#define ADDR_AREA ((uint32_t)(1<<17)) /* A17 = ALE high */
+
+#define NAND_CMD_AREA_A ((uint8_t)0x00)
+#define NAND_CMD_AREA_B ((uint8_t)0x01)
+#define NAND_CMD_AREA_C ((uint8_t)0x50)
+#define NAND_CMD_AREA_TRUE1 ((uint8_t)0x30)
+
+#define NAND_CMD_WRITE0 ((uint8_t)0x80)
+#define NAND_CMD_WRITE_TRUE1 ((uint8_t)0x10)
+#define NAND_CMD_ERASE0 ((uint8_t)0x60)
+#define NAND_CMD_ERASE1 ((uint8_t)0xD0)
+#define NAND_CMD_READID ((uint8_t)0x90)
+#define NAND_CMD_STATUS ((uint8_t)0x70)
+#define NAND_CMD_LOCK_STATUS ((uint8_t)0x7A)
+#define NAND_CMD_RESET ((uint8_t)0xFF)
+
+/* NAND memory status */
+#define NAND_VALID_ADDRESS ((uint32_t)0x00000100)
+#define NAND_INVALID_ADDRESS ((uint32_t)0x00000200)
+#define NAND_TIMEOUT_ERROR ((uint32_t)0x00000400)
+#define NAND_BUSY ((uint32_t)0x00000000)
+#define NAND_ERROR ((uint32_t)0x00000001)
+#define NAND_READY ((uint32_t)0x00000040)
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset NAND handle state
+ * @param __HANDLE__: specifies the NAND handle.
+ * @retval None
+ */
+#define __HAL_NAND_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NAND_STATE_RESET)
+
+/**
+ * @brief NAND memory address computation.
+ * @param __ADDRESS__: NAND memory address.
+ * @param __HANDLE__ : NAND handle.
+ * @retval NAND Raw address value
+ */
+#define __ARRAY_ADDRESS(__ADDRESS__ , __HANDLE__) ((__ADDRESS__)->Page + \
+ (((__ADDRESS__)->Block + (((__ADDRESS__)->Zone) * ((__HANDLE__)->Info.ZoneSize)))* ((__HANDLE__)->Info.BlockSize)))
+
+/**
+ * @brief NAND memory address cycling.
+ * @param __ADDRESS__: NAND memory address.
+ * @retval NAND address cycling value.
+ */
+#define __ADDR_1st_CYCLE(__ADDRESS__) (uint8_t)(__ADDRESS__) /* 1st addressing cycle */
+#define __ADDR_2nd_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 8) /* 2nd addressing cycle */
+#define __ADDR_3rd_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 16) /* 3rd addressing cycle */
+#define __ADDR_4th_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 24) /* 4th addressing cycle */
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing);
+HAL_StatusTypeDef HAL_NAND_DeInit(NAND_HandleTypeDef *hnand);
+void HAL_NAND_MspInit(NAND_HandleTypeDef *hnand);
+void HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand);
+void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand);
+void HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand);
+
+/* IO operation functions ****************************************************/
+HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID);
+HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand);
+HAL_StatusTypeDef HAL_NAND_Read_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypedef *pAddress, uint8_t *pBuffer, uint32_t NumPageToRead);
+HAL_StatusTypeDef HAL_NAND_Write_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypedef *pAddress, uint8_t *pBuffer, uint32_t NumPageToWrite);
+HAL_StatusTypeDef HAL_NAND_Read_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypedef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaToRead);
+HAL_StatusTypeDef HAL_NAND_Write_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypedef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaTowrite);
+HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypedef *pAddress);
+uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand);
+uint32_t HAL_NAND_Address_Inc(NAND_HandleTypeDef *hnand, NAND_AddressTypedef *pAddress);
+
+/* NAND Control functions ****************************************************/
+HAL_StatusTypeDef HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand);
+HAL_StatusTypeDef HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand);
+HAL_StatusTypeDef HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout);
+
+/* NAND State functions *******************************************************/
+HAL_NAND_StateTypeDef HAL_NAND_GetState(NAND_HandleTypeDef *hnand);
+uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand);
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_NAND_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_nor.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,243 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_nor.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of NOR HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_NOR_H
+#define __STM32F4xx_HAL_NOR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+ #include "stm32f4xx_ll_fsmc.h"
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+ #include "stm32f4xx_ll_fmc.h"
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup NOR
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/* Exported typedef ----------------------------------------------------------*/
+/**
+ * @brief HAL SRAM State structures definition
+ */
+typedef enum
+{
+ HAL_NOR_STATE_RESET = 0x00, /*!< NOR not yet initialized or disabled */
+ HAL_NOR_STATE_READY = 0x01, /*!< NOR initialized and ready for use */
+ HAL_NOR_STATE_BUSY = 0x02, /*!< NOR internal processing is ongoing */
+ HAL_NOR_STATE_ERROR = 0x03, /*!< NOR error state */
+ HAL_NOR_STATE_PROTECTED = 0x04 /*!< NOR NORSRAM device write protected */
+}HAL_NOR_StateTypeDef;
+
+/**
+ * @brief FMC NOR Status typedef
+ */
+typedef enum
+{
+ NOR_SUCCESS = 0,
+ NOR_ONGOING,
+ NOR_ERROR,
+ NOR_TIMEOUT
+}NOR_StatusTypedef;
+
+/**
+ * @brief FMC NOR ID typedef
+ */
+typedef struct
+{
+ uint16_t Manufacturer_Code; /*!< Defines the device's manufacturer code used to identify the memory */
+
+ uint16_t Device_Code1;
+
+ uint16_t Device_Code2;
+
+ uint16_t Device_Code3; /*!< Defines the devices' codes used to identify the memory.
+ These codes can be accessed by performing read operations with specific
+ control signals and addresses set.They can also be accessed by issuing
+ an Auto Select command */
+}NOR_IDTypeDef;
+
+/**
+ * @brief FMC NOR CFI typedef
+ */
+typedef struct
+{
+ /*!< Defines the information stored in the memory's Common flash interface
+ which contains a description of various electrical and timing parameters,
+ density information and functions supported by the memory */
+
+ uint16_t CFI_1;
+
+ uint16_t CFI_2;
+
+ uint16_t CFI_3;
+
+ uint16_t CFI_4;
+}NOR_CFITypeDef;
+
+/**
+ * @brief NOR handle Structure definition
+ */
+typedef struct
+{
+ FMC_NORSRAM_TypeDef *Instance; /*!< Register base address */
+
+ FMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */
+
+ FMC_NORSRAM_InitTypeDef Init; /*!< NOR device control configuration parameters */
+
+ HAL_LockTypeDef Lock; /*!< NOR locking object */
+
+ __IO HAL_NOR_StateTypeDef State; /*!< NOR device access state */
+
+}NOR_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup NOR_Exported_Constants
+ * @{
+ */
+/* NOR device IDs addresses */
+#define MC_ADDRESS ((uint16_t)0x0000)
+#define DEVICE_CODE1_ADDR ((uint16_t)0x0001)
+#define DEVICE_CODE2_ADDR ((uint16_t)0x000E)
+#define DEVICE_CODE3_ADDR ((uint16_t)0x000F)
+
+/* NOR CFI IDs addresses */
+#define CFI1_ADDRESS ((uint16_t)0x61)
+#define CFI2_ADDRESS ((uint16_t)0x62)
+#define CFI3_ADDRESS ((uint16_t)0x63)
+#define CFI4_ADDRESS ((uint16_t)0x64)
+
+/* NOR operation wait timeout */
+#define NOR_TMEOUT ((uint16_t)0xFFFF)
+
+/* NOR memory data width */
+#define NOR_MEMORY_8B ((uint8_t)0x0)
+#define NOR_MEMORY_16B ((uint8_t)0x1)
+
+/* NOR memory device read/write start address */
+#define NOR_MEMORY_ADRESS1 ((uint32_t)0x60000000)
+#define NOR_MEMORY_ADRESS2 ((uint32_t)0x64000000)
+#define NOR_MEMORY_ADRESS3 ((uint32_t)0x68000000)
+#define NOR_MEMORY_ADRESS4 ((uint32_t)0x6C000000)
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset NOR handle state
+ * @param __HANDLE__: specifies the NOR handle.
+ * @retval None
+ */
+#define __HAL_NOR_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NOR_STATE_RESET)
+
+/**
+ * @brief NOR memory address shifting.
+ * @param __ADDRESS__: NOR memory address
+ * @retval NOR shifted address value
+ */
+#define __NOR_ADDR_SHIFT(__NOR_ADDRESS, __NOR_MEMORY_WIDTH_, __ADDRESS__) (((__NOR_MEMORY_WIDTH_) == NOR_MEMORY_8B)? ((uint32_t)((__NOR_ADDRESS) + (2 * (__ADDRESS__)))):\
+ ((uint32_t)((__NOR_ADDRESS) + (__ADDRESS__))))
+
+/**
+ * @brief NOR memory write data to specified address.
+ * @param __ADDRESS__: NOR memory address
+ * @param __DATA__: Data to write
+ * @retval None
+ */
+#define __NOR_WRITE(__ADDRESS__, __DATA__) (*(__IO uint16_t *)((uint32_t)(__ADDRESS__)) = (__DATA__))
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming);
+HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout);
+
+/* I/O operation functions ***************************************************/
+HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID);
+HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor);
+HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData);
+HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData);
+
+HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize);
+HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize);
+
+HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address);
+HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address);
+HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI);
+
+/* NOR Control functions *****************************************************/
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor);
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor);
+
+/* NOR State functions ********************************************************/
+HAL_NOR_StateTypeDef HAL_NOR_GetState(NOR_HandleTypeDef *hnor);
+NOR_StatusTypedef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout);
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_NOR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_pccard.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,185 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pccard.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of PCCARD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PCCARD_H
+#define __STM32F4xx_HAL_PCCARD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+ #include "stm32f4xx_ll_fsmc.h"
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+ #include "stm32f4xx_ll_fmc.h"
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCCARD
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/* Exported typedef ----------------------------------------------------------*/
+
+/**
+ * @brief HAL SRAM State structures definition
+ */
+typedef enum
+{
+ HAL_PCCARD_STATE_RESET = 0x00, /*!< PCCARD peripheral not yet initialized or disabled */
+ HAL_PCCARD_STATE_READY = 0x01, /*!< PCCARD peripheral ready */
+ HAL_PCCARD_STATE_BUSY = 0x02, /*!< PCCARD peripheral busy */
+ HAL_PCCARD_STATE_ERROR = 0x04 /*!< PCCARD peripheral error */
+}HAL_PCCARD_StateTypeDef;
+
+typedef enum
+{
+ CF_SUCCESS = 0,
+ CF_ONGOING,
+ CF_ERROR,
+ CF_TIMEOUT
+}CF_StatusTypedef;
+
+/**
+ * @brief FMC_PCCARD handle Structure definition
+ */
+typedef struct
+{
+ FMC_PCCARD_TypeDef *Instance; /*!< Register base address for PCCARD device */
+
+ FMC_PCCARD_InitTypeDef Init; /*!< PCCARD device control configuration parameters */
+
+ __IO HAL_PCCARD_StateTypeDef State; /*!< PCCARD device access state */
+
+ HAL_LockTypeDef Lock; /*!< PCCARD Lock */
+
+}PCCARD_HandleTypeDef;
+
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PCCARD_Exported_Constants
+ * @{
+ */
+
+#define CF_DEVICE_ADDRESS ((uint32_t)0x90000000)
+#define CF_ATTRIBUTE_SPACE_ADDRESS ((uint32_t)0x98000000) /* Attribute space size to @0x9BFF FFFF */
+#define CF_COMMON_SPACE_ADDRESS CF_DEVICE_ADDRESS /* Common space size to @0x93FF FFFF */
+#define CF_IO_SPACE_ADDRESS ((uint32_t)0x9C000000) /* IO space size to @0x9FFF FFFF */
+#define CF_IO_SPACE_PRIMARY_ADDR ((uint32_t)0x9C0001F0) /* IO space size to @0x9FFF FFFF */
+
+/* Compact Flash-ATA registers description */
+#define CF_DATA ((uint8_t)0x00) /* Data register */
+#define CF_SECTOR_COUNT ((uint8_t)0x02) /* Sector Count register */
+#define CF_SECTOR_NUMBER ((uint8_t)0x03) /* Sector Number register */
+#define CF_CYLINDER_LOW ((uint8_t)0x04) /* Cylinder low register */
+#define CF_CYLINDER_HIGH ((uint8_t)0x05) /* Cylinder high register */
+#define CF_CARD_HEAD ((uint8_t)0x06) /* Card/Head register */
+#define CF_STATUS_CMD ((uint8_t)0x07) /* Status(read)/Command(write) register */
+#define CF_STATUS_CMD_ALTERNATE ((uint8_t)0x0E) /* Alternate Status(read)/Command(write) register */
+#define CF_COMMON_DATA_AREA ((uint16_t)0x0400) /* Start of data area (for Common access only!) */
+
+/* Compact Flash-ATA commands */
+#define CF_READ_SECTOR_CMD ((uint8_t)0x20)
+#define CF_WRITE_SECTOR_CMD ((uint8_t)0x30)
+#define CF_ERASE_SECTOR_CMD ((uint8_t)0xC0)
+#define CF_IDENTIFY_CMD ((uint8_t)0xEC)
+
+/* Compact Flash status */
+#define CF_TIMEOUT_ERROR ((uint8_t)0x60)
+#define CF_BUSY ((uint8_t)0x80)
+#define CF_PROGR ((uint8_t)0x01)
+#define CF_READY ((uint8_t)0x40)
+
+#define CF_SECTOR_SIZE ((uint32_t)255) /* In half words */
+
+/**
+ * @}
+ */
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset PCCARD handle state
+ * @param __HANDLE__: specifies the PCCARD handle.
+ * @retval None
+ */
+#define __HAL_PCCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_PCCARD_STATE_RESET)
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_PCCARD_Init(PCCARD_HandleTypeDef *hpccard, FMC_NAND_PCC_TimingTypeDef *ComSpaceTiming, FMC_NAND_PCC_TimingTypeDef *AttSpaceTiming, FMC_NAND_PCC_TimingTypeDef *IOSpaceTiming);
+HAL_StatusTypeDef HAL_PCCARD_DeInit(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_MspInit(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_MspDeInit(PCCARD_HandleTypeDef *hpccard);
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_CF_Read_ID(PCCARD_HandleTypeDef *hpccard, uint8_t CompactFlash_ID[], uint8_t *pStatus);
+HAL_StatusTypeDef HAL_CF_Write_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, uint8_t *pStatus);
+HAL_StatusTypeDef HAL_CF_Read_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, uint8_t *pStatus);
+HAL_StatusTypeDef HAL_CF_Erase_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t SectorAddress, uint8_t *pStatus);
+HAL_StatusTypeDef HAL_CF_Reset(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_IRQHandler(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_ITCallback(PCCARD_HandleTypeDef *hpccard);
+
+/* PCCARD State functions *******************************************************/
+HAL_PCCARD_StateTypeDef HAL_PCCARD_GetState(PCCARD_HandleTypeDef *hpccard);
+CF_StatusTypedef HAL_CF_GetStatus(PCCARD_HandleTypeDef *hpccard);
+CF_StatusTypedef HAL_CF_ReadStatus(PCCARD_HandleTypeDef *hpccard);
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_PCCARD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_pcd.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,281 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pcd.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of PCD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PCD_H
+#define __STM32F4xx_HAL_PCD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_usb.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+ /**
+ * @brief PCD State structures definition
+ */
+typedef enum
+{
+ HAL_PCD_STATE_RESET = 0x00,
+ HAL_PCD_STATE_READY = 0x01,
+ HAL_PCD_STATE_ERROR = 0x02,
+ HAL_PCD_STATE_BUSY = 0x03,
+ HAL_PCD_STATE_TIMEOUT = 0x04
+} PCD_StateTypeDef;
+
+
+typedef USB_OTG_GlobalTypeDef PCD_TypeDef;
+typedef USB_OTG_CfgTypeDef PCD_InitTypeDef;
+typedef USB_OTG_EPTypeDef PCD_EPTypeDef ;
+
+/**
+ * @brief PCD Handle Structure definition
+ */
+typedef struct
+{
+ PCD_TypeDef *Instance; /*!< Register base address */
+ PCD_InitTypeDef Init; /*!< PCD required parameters */
+ PCD_EPTypeDef IN_ep[15]; /*!< IN endpoint parameters */
+ PCD_EPTypeDef OUT_ep[15]; /*!< OUT endpoint parameters */
+ HAL_LockTypeDef Lock; /*!< PCD peripheral status */
+ __IO PCD_StateTypeDef State; /*!< PCD communication state */
+ uint32_t Setup[12]; /*!< Setup packet buffer */
+ void *pData; /*!< Pointer to upper stack Handler */
+
+} PCD_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PCD_Exported_Constants
+ * @{
+ */
+
+/** @defgroup PCD_Speed
+ * @{
+ */
+#define PCD_SPEED_HIGH 0
+#define PCD_SPEED_HIGH_IN_FULL 1
+#define PCD_SPEED_FULL 2
+/**
+ * @}
+ */
+
+ /** @defgroup PCD_PHY_Module
+ * @{
+ */
+#define PCD_PHY_ULPI 1
+#define PCD_PHY_EMBEDDED 2
+/**
+ * @}
+ */
+
+/** @defgroup PCD_Instance_definition
+ * @{
+ */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+ #define IS_PCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS) || \
+ ((INSTANCE) == USB_OTG_HS))
+#elif defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+ #define IS_PCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS))
+#endif
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup PCD_Interrupt_Clock
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+#define __HAL_PCD_ENABLE(__HANDLE__) USB_EnableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_PCD_DISABLE(__HANDLE__) USB_DisableGlobalInt ((__HANDLE__)->Instance)
+
+#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__))
+#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0)
+
+
+#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= \
+ ~(USB_OTG_PCGCCTL_STOPCLK)
+
+
+#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK
+
+#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE))&0x10)
+
+#define USB_FS_EXTI_TRIGGER_RISING_EDGE ((uint32_t)0x08)
+#define USB_FS_EXTI_TRIGGER_FALLING_EDGE ((uint32_t)0x0C)
+#define USB_FS_EXTI_TRIGGER_BOTH_EDGE ((uint32_t)0x10)
+
+#define USB_HS_EXTI_TRIGGER_RISING_EDGE ((uint32_t)0x08)
+#define USB_HS_EXTI_TRIGGER_FALLING_EDGE ((uint32_t)0x0C)
+#define USB_HS_EXTI_TRIGGER_BOTH_EDGE ((uint32_t)0x10)
+
+
+#define USB_HS_EXTI_LINE_WAKEUP ((uint32_t)0x00100000) /*!< External interrupt line 20 Connected to the USB HS EXTI Line */
+#define USB_FS_EXTI_LINE_WAKEUP ((uint32_t)0x00040000) /*!< External interrupt line 18 Connected to the USB FS EXTI Line */
+
+
+
+#define __HAL_USB_HS_EXTI_ENABLE_IT() EXTI->IMR |= (USB_HS_EXTI_LINE_WAKEUP)
+#define __HAL_USB_HS_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_HS_EXTI_LINE_WAKEUP)
+#define __HAL_USB_HS_EXTI_GET_FLAG() EXTI->PR & (USB_HS_EXTI_LINE_WAKEUP)
+#define __HAL_USB_HS_EXTI_CLEAR_FLAG() EXTI->PR = (USB_HS_EXTI_LINE_WAKEUP)
+
+#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER() EXTI->FTSR &= ~(USB_HS_EXTI_LINE_WAKEUP);\
+ EXTI->RTSR |= USB_HS_EXTI_LINE_WAKEUP
+
+
+#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER() EXTI->FTSR |= (USB_HS_EXTI_LINE_WAKEUP);\
+ EXTI->RTSR &= ~(USB_HS_EXTI_LINE_WAKEUP)
+
+
+#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER() EXTI->RTSR &= ~(USB_HS_EXTI_LINE_WAKEUP);\
+ EXTI->FTSR &= ~(USB_HS_EXTI_LINE_WAKEUP;)\
+ EXTI->RTSR |= USB_HS_EXTI_LINE_WAKEUP;\
+ EXTI->FTSR |= USB_HS_EXTI_LINE_WAKEUP
+
+#define __HAL_USB_HS_EXTI_GENERATE_SWIT() (EXTI->SWIER |= USB_FS_EXTI_LINE_WAKEUP)
+
+
+#define __HAL_USB_FS_EXTI_ENABLE_IT() EXTI->IMR |= USB_FS_EXTI_LINE_WAKEUP
+#define __HAL_USB_FS_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_FS_EXTI_LINE_WAKEUP)
+#define __HAL_USB_FS_EXTI_GET_FLAG() EXTI->PR & (USB_FS_EXTI_LINE_WAKEUP)
+#define __HAL_USB_FS_EXTI_CLEAR_FLAG() EXTI->PR = USB_FS_EXTI_LINE_WAKEUP
+
+#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER() EXTI->FTSR &= ~(USB_FS_EXTI_LINE_WAKEUP);\
+ EXTI->RTSR |= USB_FS_EXTI_LINE_WAKEUP
+
+
+#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER() EXTI->FTSR |= (USB_FS_EXTI_LINE_WAKEUP);\
+ EXTI->RTSR &= ~(USB_FS_EXTI_LINE_WAKEUP)
+
+
+#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER() EXTI->RTSR &= ~(USB_FS_EXTI_LINE_WAKEUP);\
+ EXTI->FTSR &= ~(USB_FS_EXTI_LINE_WAKEUP);\
+ EXTI->RTSR |= USB_FS_EXTI_LINE_WAKEUP;\
+ EXTI->FTSR |= USB_FS_EXTI_LINE_WAKEUP
+
+#define __HAL_USB_FS_EXTI_GENERATE_SWIT() (EXTI->SWIER |= USB_FS_EXTI_LINE_WAKEUP)
+
+/**
+ * @}
+ */
+
+/* Include PCD HAL Extension module */
+#include "stm32f4xx_hal_pcd_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeInit (PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
+
+/* I/O operation functions *****************************************************/
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
+
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
+
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_ActiveRemoteWakeup(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeActiveRemoteWakeup(PCD_HandleTypeDef *hpcd);
+
+/* Create an alias to keep compatibility with the old name */
+#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo
+#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo
+
+/* Peripheral State functions **************************************************/
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_pcd_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,78 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pcd_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of PCD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PCD_EX_H
+#define __STM32F4xx_HAL_PCD_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCDEx
+ * @{
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Peripheral Extended functions *********************************************/
+HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size);
+HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PCD_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_pwr.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,337 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pwr.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of PWR HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PWR_H
+#define __STM32F4xx_HAL_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWR
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/**
+ * @brief PWR PVD configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level.
+ This parameter can be a value of @ref PWR_PVD_detection_level */
+
+ uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref PWR_PVD_Mode */
+}PWR_PVDTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/* ------------- PWR registers bit address in the alias region ---------------*/
+#define PWR_OFFSET (PWR_BASE - PERIPH_BASE)
+
+/* --- CR Register ---*/
+/* Alias word address of DBP bit */
+#define CR_OFFSET (PWR_OFFSET + 0x00)
+#define DBP_BitNumber 0x08
+#define CR_DBP_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (DBP_BitNumber * 4))
+
+/* Alias word address of PVDE bit */
+#define PVDE_BitNumber 0x04
+#define CR_PVDE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PVDE_BitNumber * 4))
+
+/* Alias word address of PMODE bit */
+#define PMODE_BitNumber 0x0E
+#define CR_PMODE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PMODE_BitNumber * 4))
+
+/* --- CSR Register ---*/
+/* Alias word address of EWUP bit */
+#define CSR_OFFSET (PWR_OFFSET + 0x04)
+#define EWUP_BitNumber 0x08
+#define CSR_EWUP_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP_BitNumber * 4))
+
+/** @defgroup PWR_Exported_Constants
+ * @{
+ */
+
+/** @defgroup PWR_WakeUp_Pins
+ * @{
+ */
+
+#define PWR_WAKEUP_PIN1 PWR_CSR_EWUP
+#define IS_PWR_WAKEUP_PIN(PIN) ((PIN) == PWR_WAKEUP_PIN1)
+/**
+ * @}
+ */
+
+/** @defgroup PWR_PVD_detection_level
+ * @{
+ */
+#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0
+#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1
+#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2
+#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3
+#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4
+#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5
+#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6
+#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
+ ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
+ ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
+ ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_PVD_Mode
+ * @{
+ */
+#define PWR_MODE_EVT ((uint32_t)0x00000000) /*!< No Interrupt */
+#define PWR_MODE_IT_RISING ((uint32_t)0x00000001) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_MODE_IT_FALLING ((uint32_t)0x00000002) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_MODE_IT_RISING_FALLING ((uint32_t)0x00000003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_MODE_EVT) || ((MODE) == PWR_MODE_IT_RISING)|| \
+ ((MODE) == PWR_MODE_IT_FALLING) || ((MODE) == PWR_MODE_IT_RISING_FALLING))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Regulator_state_in_STOP_mode
+ * @{
+ */
+#define PWR_MAINREGULATOR_ON ((uint32_t)0x00000000)
+#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS
+
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
+ ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_SLEEP_mode_entry
+ * @{
+ */
+#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01)
+#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02)
+#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_STOP_mode_entry
+ * @{
+ */
+#define PWR_STOPENTRY_WFI ((uint8_t)0x01)
+#define PWR_STOPENTRY_WFE ((uint8_t)0x02)
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Regulator_Voltage_Scale
+ * @{
+ */
+#define PWR_REGULATOR_VOLTAGE_SCALE1 ((uint32_t)0x0000C000)
+#define PWR_REGULATOR_VOLTAGE_SCALE2 ((uint32_t)0x00008000)
+#define PWR_REGULATOR_VOLTAGE_SCALE3 ((uint32_t)0x00004000)
+#define IS_PWR_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
+ ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \
+ ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Flag
+ * @{
+ */
+#define PWR_FLAG_WU PWR_CSR_WUF
+#define PWR_FLAG_SB PWR_CSR_SBF
+#define PWR_FLAG_PVDO PWR_CSR_PVDO
+#define PWR_FLAG_BRR PWR_CSR_BRR
+#define PWR_FLAG_VOSRDY PWR_CSR_VOSRDY
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief macros configure the main internal regulator output voltage.
+ * @param __REGULATOR__: specifies the regulator output voltage to achieve
+ * a tradeoff between performance and power consumption when the device does
+ * not operate at the maximum frequency (refer to the datasheets for more details).
+ * This parameter can be one of the following values:
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
+ * @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
+ * @retval None
+ */
+#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) (MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)))
+
+/** @brief Check PWR flag is set or not.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
+ * was received from the WKUP pin or from the RTC alarm (Alarm A
+ * or Alarm B), RTC Tamper event, RTC TimeStamp event or RTC Wakeup.
+ * An additional wakeup event is detected if the WKUP pin is enabled
+ * (by setting the EWUP bit) when the WKUP pin level is already high.
+ * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
+ * resumed from StandBy mode.
+ * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
+ * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
+ * For this reason, this bit is equal to 0 after Standby or reset
+ * until the PVDE bit is set.
+ * @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset
+ * when the device wakes up from Standby mode or by a system reset
+ * or power reset.
+ * @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage
+ * scaling output selection is ready.
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the PWR's pending flags.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag
+ * @arg PWR_FLAG_SB: StandBy flag
+ */
+#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2)
+
+#define PWR_EXTI_LINE_PVD ((uint32_t)0x00010000) /*!< External interrupt line 16 Connected to the PVD EXTI Line */
+/**
+ * @brief Enable the PVD Exti Line.
+ * @param __EXTILINE__: specifies the PVD Exti sources to be enabled.
+ * This parameter can be:
+ * @arg PWR_EXTI_LINE_PVD
+ * @retval None.
+ */
+#define __HAL_PVD_EXTI_ENABLE_IT(__EXTILINE__) (EXTI->IMR |= (__EXTILINE__))
+
+/**
+ * @brief Disable the PVD EXTI Line.
+ * @param __EXTILINE__: specifies the PVD EXTI sources to be disabled.
+ * This parameter can be:
+ * @arg PWR_EXTI_LINE_PVD
+ * @retval None.
+ */
+#define __HAL_PVD_EXTI_DISABLE_IT(__EXTILINE__) (EXTI->IMR &= ~(__EXTILINE__))
+
+/**
+ * @brief checks whether the specified PVD Exti interrupt flag is set or not.
+ * @param __EXTILINE__: specifies the PVD Exti sources to be cleared.
+ * This parameter can be:
+ * @arg PWR_EXTI_LINE_PVD
+ * @retval EXTI PVD Line Status.
+ */
+#define __HAL_PVD_EXTI_GET_FLAG(__EXTILINE__) (EXTI->PR & (__EXTILINE__))
+
+/**
+ * @brief Clear the PVD Exti flag.
+ * @param __EXTILINE__: specifies the PVD Exti sources to be cleared.
+ * This parameter can be:
+ * @arg PWR_EXTI_LINE_PVD
+ * @retval None.
+ */
+#define __HAL_PVD_EXTI_CLEAR_FLAG(__EXTILINE__) (EXTI->PR = (__EXTILINE__))
+
+/**
+ * @brief Generates a Software interrupt on selected EXTI line.
+ * @param __EXTILINE__: specifies the PVD EXTI sources to be disabled.
+ * This parameter can be:
+ * @arg PWR_EXTI_LINE_PVD
+ * @retval None
+ */
+#define __HAL_PVD_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+
+/* Include PWR HAL Extension module */
+#include "stm32f4xx_hal_pwr_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions *****************************/
+void HAL_PWR_DeInit(void);
+void HAL_PWR_EnableBkUpAccess(void);
+void HAL_PWR_DisableBkUpAccess(void);
+
+/* Peripheral Control functions **********************************************/
+/* PVD configuration */
+void HAL_PWR_PVDConfig(PWR_PVDTypeDef *sConfigPVD);
+void HAL_PWR_EnablePVD(void);
+void HAL_PWR_DisablePVD(void);
+
+/* WakeUp pins configuration */
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
+
+/* Low Power modes entry */
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
+void HAL_PWR_EnterSTANDBYMode(void);
+
+void HAL_PWR_PVD_IRQHandler(void);
+void HAL_PWR_PVDCallback(void);
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_pwr_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,197 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_pwr_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of PWR HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PWR_EX_H
+#define __STM32F4xx_HAL_PWR_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWREx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* ------------- PWR registers bit address in the alias region ---------------*/
+/* --- CR Register ---*/
+/* Alias word address of FPDS bit */
+#define FPDS_BitNumber 0x09
+#define CR_FPDS_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (FPDS_BitNumber * 4))
+
+/* Alias word address of ODEN bit */
+#define ODEN_BitNumber 0x10
+#define CR_ODEN_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (ODEN_BitNumber * 4))
+
+/* Alias word address of ODSWEN bit */
+#define ODSWEN_BitNumber 0x11
+#define CR_ODSWEN_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (ODSWEN_BitNumber * 4))
+
+/* Alias word address of MRLVDS bit */
+#define MRLVDS_BitNumber 0x0B
+#define CR_MRLVDS_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (MRLVDS_BitNumber * 4))
+
+/* Alias word address of LPLVDS bit */
+#define LPLVDS_BitNumber 0x0A
+#define CR_LPLVDS_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (LPLVDS_BitNumber * 4))
+
+/* --- CSR Register ---*/
+/* Alias word address of BRE bit */
+#define BRE_BitNumber 0x09
+#define CSR_BRE_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (BRE_BitNumber * 4))
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode
+ * @{
+ */
+#define PWR_MAINREGULATOR_UNDERDRIVE_ON PWR_CR_MRUDS
+#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON ((uint32_t)(PWR_CR_LPDS | PWR_CR_LPUDS))
+
+#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \
+ ((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON))
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_Over_Under_Drive_Flag
+ * @{
+ */
+#define PWR_FLAG_ODRDY PWR_CSR_ODRDY
+#define PWR_FLAG_ODSWRDY PWR_CSR_ODSWRDY
+#define PWR_FLAG_UDRDY PWR_CSR_UDSWRDY
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/** @brief Macros to enable or disable the Over drive mode.
+ * @note These macros can be used only for STM32F42xx/STM3243xx devices.
+ */
+#define __HAL_PWR_OVERDRIVE_ENABLE() (*(__IO uint32_t *) CR_ODEN_BB = ENABLE)
+#define __HAL_PWR_OVERDRIVE_DISABLE() (*(__IO uint32_t *) CR_ODEN_BB = DISABLE)
+
+/** @brief Macros to enable or disable the Over drive switching.
+ * @note These macros can be used only for STM32F42xx/STM3243xx devices.
+ */
+#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = ENABLE)
+#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = DISABLE)
+
+/** @brief Macros to enable or disable the Under drive mode.
+ * @note This mode is enabled only with STOP low power mode.
+ * In this mode, the 1.2V domain is preserved in reduced leakage mode. This
+ * mode is only available when the main regulator or the low power regulator
+ * is in low voltage mode.
+ * @note If the Under-drive mode was enabled, it is automatically disabled after
+ * exiting Stop mode.
+ * When the voltage regulator operates in Under-drive mode, an additional
+ * startup delay is induced when waking up from Stop mode.
+ */
+#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR |= (uint32_t)PWR_CR_UDEN)
+#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR &= (uint32_t)(~PWR_CR_UDEN))
+
+/** @brief Check PWR flag is set or not.
+ * @note These macros can be used only for STM32F42xx/STM3243xx devices.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode
+ * is ready
+ * @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode
+ * switching is ready
+ * @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode
+ * is enabled in Stop mode
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the Under-Drive Ready flag.
+ * @note These macros can be used only for STM32F42xx/STM3243xx devices.
+ */
+#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR |= PWR_FLAG_UDRDY)
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/* Exported functions --------------------------------------------------------*/
+void HAL_PWREx_EnableFlashPowerDown(void);
+void HAL_PWREx_DisableFlashPowerDown(void);
+HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void);
+HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void);
+
+#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+void HAL_PWREx_EnableMainRegulatorLowVoltage(void);
+void HAL_PWREx_DisableMainRegulatorLowVoltage(void);
+void HAL_PWREx_EnableLowRegulatorLowVoltage(void);
+void HAL_PWREx_DisableLowRegulatorLowVoltage(void);
+#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+HAL_StatusTypeDef HAL_PWREx_ActivateOverDrive(void);
+HAL_StatusTypeDef HAL_PWREx_DeactivateOverDrive(void);
+HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PWR_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_rcc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1181 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rcc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of RCC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RCC_H
+#define __STM32F4xx_HAL_RCC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief RCC PLL configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PLLState; /*!< The new state of the PLL.
+ This parameter can be a value of @ref RCC_PLL_Config */
+
+ uint32_t PLLSource; /*!< RCC_PLLSource: PLL entry clock source.
+ This parameter must be a value of @ref RCC_PLL_Clock_Source */
+
+ uint32_t PLLM; /*!< PLLM: Division factor for PLL VCO input clock.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 63 */
+
+ uint32_t PLLN; /*!< PLLN: Multiplication factor for PLL VCO output clock.
+ This parameter must be a number between Min_Data = 192 and Max_Data = 432 */
+
+ uint32_t PLLP; /*!< PLLP: Division factor for main system clock (SYSCLK).
+ This parameter must be a value of @ref RCC_PLLP_Clock_Divider */
+
+ uint32_t PLLQ; /*!< PLLQ: Division factor for OTG FS, SDIO and RNG clocks.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 63 */
+
+}RCC_PLLInitTypeDef;
+
+/**
+ * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition
+ */
+typedef struct
+{
+ uint32_t OscillatorType; /*!< The oscillators to be configured.
+ This parameter can be a value of @ref RCC_Oscillator_Type */
+
+ uint32_t HSEState; /*!< The new state of the HSE.
+ This parameter can be a value of @ref RCC_HSE_Config */
+
+ uint32_t LSEState; /*!< The new state of the LSE.
+ This parameter can be a value of @ref RCC_LSE_Config */
+
+ uint32_t HSIState; /*!< The new state of the HSI.
+ This parameter can be a value of @ref RCC_HSI_Config */
+
+ uint32_t HSICalibrationValue; /*!< The calibration trimming value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
+
+ uint32_t LSIState; /*!< The new state of the LSI.
+ This parameter can be a value of @ref RCC_LSI_Config */
+
+ RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */
+
+}RCC_OscInitTypeDef;
+
+/**
+ * @brief RCC System, AHB and APB busses clock configuration structure definition
+ */
+typedef struct
+{
+ uint32_t ClockType; /*!< The clock to be configured.
+ This parameter can be a value of @ref RCC_System_Clock_Type */
+
+ uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock.
+ This parameter can be a value of @ref RCC_System_Clock_Source */
+
+ uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
+ This parameter can be a value of @ref RCC_AHB_Clock_Source */
+
+ uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
+
+ uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
+
+}RCC_ClkInitTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCC_Exported_Constants
+ * @{
+ */
+
+/** @defgroup RCC_BitAddress_AliasRegion
+ * @brief RCC registers bit address in the alias region
+ * @{
+ */
+#define RCC_OFFSET (RCC_BASE - PERIPH_BASE)
+/* --- CR Register ---*/
+/* Alias word address of HSION bit */
+#define RCC_CR_OFFSET (RCC_OFFSET + 0x00)
+#define HSION_BitNumber 0x00
+#define CR_HSION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (HSION_BitNumber * 4))
+/* Alias word address of CSSON bit */
+#define CSSON_BitNumber 0x13
+#define CR_CSSON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (CSSON_BitNumber * 4))
+/* Alias word address of PLLON bit */
+#define PLLON_BitNumber 0x18
+#define CR_PLLON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (PLLON_BitNumber * 4))
+/* Alias word address of PLLI2SON bit */
+#define PLLI2SON_BitNumber 0x1A
+#define CR_PLLI2SON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (PLLI2SON_BitNumber * 4))
+
+/* --- CFGR Register ---*/
+/* Alias word address of I2SSRC bit */
+#define RCC_CFGR_OFFSET (RCC_OFFSET + 0x08)
+#define I2SSRC_BitNumber 0x17
+#define CFGR_I2SSRC_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32) + (I2SSRC_BitNumber * 4))
+
+/* --- BDCR Register ---*/
+/* Alias word address of RTCEN bit */
+#define RCC_BDCR_OFFSET (RCC_OFFSET + 0x70)
+#define RTCEN_BitNumber 0x0F
+#define BDCR_RTCEN_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32) + (RTCEN_BitNumber * 4))
+/* Alias word address of BDRST bit */
+#define BDRST_BitNumber 0x10
+#define BDCR_BDRST_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32) + (BDRST_BitNumber * 4))
+
+/* --- CSR Register ---*/
+/* Alias word address of LSION bit */
+#define RCC_CSR_OFFSET (RCC_OFFSET + 0x74)
+#define LSION_BitNumber 0x00
+#define CSR_LSION_BB (PERIPH_BB_BASE + (RCC_CSR_OFFSET * 32) + (LSION_BitNumber * 4))
+
+/* CR register byte 3 (Bits[23:16]) base address */
+#define CR_BYTE2_ADDRESS ((uint32_t)0x40023802)
+
+/* CIR register byte 2 (Bits[15:8]) base address */
+#define CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + 0x0C + 0x01))
+
+/* CIR register byte 3 (Bits[23:16]) base address */
+#define CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + 0x0C + 0x02))
+
+/* BDCR register base address */
+#define BDCR_BYTE0_ADDRESS (PERIPH_BASE + RCC_BDCR_OFFSET)
+
+
+#define DBP_TIMEOUT_VALUE ((uint32_t)100)
+#define LSE_TIMEOUT_VALUE ((uint32_t)600)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Oscillator_Type
+ * @{
+ */
+#define RCC_OSCILLATORTYPE_NONE ((uint32_t)0x00000000)
+#define RCC_OSCILLATORTYPE_HSE ((uint32_t)0x00000001)
+#define RCC_OSCILLATORTYPE_HSI ((uint32_t)0x00000002)
+#define RCC_OSCILLATORTYPE_LSE ((uint32_t)0x00000004)
+#define RCC_OSCILLATORTYPE_LSI ((uint32_t)0x00000008)
+
+#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) ((OSCILLATOR) <= 15)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSE_Config
+ * @{
+ */
+#define RCC_HSE_OFF ((uint8_t)0x00)
+#define RCC_HSE_ON ((uint8_t)0x01)
+#define RCC_HSE_BYPASS ((uint8_t)0x05)
+
+#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \
+ ((HSE) == RCC_HSE_BYPASS))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSE_Config
+ * @{
+ */
+#define RCC_LSE_OFF ((uint8_t)0x00)
+#define RCC_LSE_ON ((uint8_t)0x01)
+#define RCC_LSE_BYPASS ((uint8_t)0x05)
+
+#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \
+ ((LSE) == RCC_LSE_BYPASS))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI_Config
+ * @{
+ */
+#define RCC_HSI_OFF ((uint8_t)0x00)
+#define RCC_HSI_ON ((uint8_t)0x01)
+
+#define IS_RCC_HSI(HSI) (((HSI) == RCC_HSI_OFF) || ((HSI) == RCC_HSI_ON))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSI_Config
+ * @{
+ */
+#define RCC_LSI_OFF ((uint8_t)0x00)
+#define RCC_LSI_ON ((uint8_t)0x01)
+
+#define IS_RCC_LSI(LSI) (((LSI) == RCC_LSI_OFF) || ((LSI) == RCC_LSI_ON))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Config
+ * @{
+ */
+#define RCC_PLL_NONE ((uint8_t)0x00)
+#define RCC_PLL_OFF ((uint8_t)0x01)
+#define RCC_PLL_ON ((uint8_t)0x02)
+
+#define IS_RCC_PLL(PLL) (((PLL) == RCC_PLL_NONE) ||((PLL) == RCC_PLL_OFF) || ((PLL) == RCC_PLL_ON))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLLP_Clock_Divider
+ * @{
+ */
+#define RCC_PLLP_DIV2 ((uint32_t)0x00000002)
+#define RCC_PLLP_DIV4 ((uint32_t)0x00000004)
+#define RCC_PLLP_DIV6 ((uint32_t)0x00000006)
+#define RCC_PLLP_DIV8 ((uint32_t)0x00000008)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Clock_Source
+ * @{
+ */
+#define RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI
+#define RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE
+
+#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \
+ ((SOURCE) == RCC_PLLSOURCE_HSE))
+#define IS_RCC_PLLM_VALUE(VALUE) ((VALUE) <= 63)
+#define IS_RCC_PLLN_VALUE(VALUE) ((192 <= (VALUE)) && ((VALUE) <= 432))
+#define IS_RCC_PLLP_VALUE(VALUE) (((VALUE) == 2) || ((VALUE) == 4) || ((VALUE) == 6) || ((VALUE) == 8))
+#define IS_RCC_PLLQ_VALUE(VALUE) ((4 <= (VALUE)) && ((VALUE) <= 15))
+
+#define IS_RCC_PLLI2SN_VALUE(VALUE) ((192 <= (VALUE)) && ((VALUE) <= 432))
+#define IS_RCC_PLLI2SR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Type
+ * @{
+ */
+#define RCC_CLOCKTYPE_SYSCLK ((uint32_t)0x00000001)
+#define RCC_CLOCKTYPE_HCLK ((uint32_t)0x00000002)
+#define RCC_CLOCKTYPE_PCLK1 ((uint32_t)0x00000004)
+#define RCC_CLOCKTYPE_PCLK2 ((uint32_t)0x00000008)
+
+#define IS_RCC_CLOCKTYPE(CLK) ((1 <= (CLK)) && ((CLK) <= 15))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Source
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI
+#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE
+#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL
+
+#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB_Clock_Source
+ * @{
+ */
+#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1
+#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2
+#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4
+#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8
+#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16
+#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64
+#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128
+#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256
+#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512
+
+#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_DIV1) || ((HCLK) == RCC_SYSCLK_DIV2) || \
+ ((HCLK) == RCC_SYSCLK_DIV4) || ((HCLK) == RCC_SYSCLK_DIV8) || \
+ ((HCLK) == RCC_SYSCLK_DIV16) || ((HCLK) == RCC_SYSCLK_DIV64) || \
+ ((HCLK) == RCC_SYSCLK_DIV128) || ((HCLK) == RCC_SYSCLK_DIV256) || \
+ ((HCLK) == RCC_SYSCLK_DIV512))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_APB2_Clock_Source
+ * @{
+ */
+#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1
+#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2
+#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4
+#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8
+#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16
+
+#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_DIV1) || ((PCLK) == RCC_HCLK_DIV2) || \
+ ((PCLK) == RCC_HCLK_DIV4) || ((PCLK) == RCC_HCLK_DIV8) || \
+ ((PCLK) == RCC_HCLK_DIV16))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_RTC_Clock_Source
+ * @{
+ */
+#define RCC_RTCCLKSOURCE_LSE ((uint32_t)0x00000100)
+#define RCC_RTCCLKSOURCE_LSI ((uint32_t)0x00000200)
+#define RCC_RTCCLKSOURCE_HSE_DIV2 ((uint32_t)0x00020300)
+#define RCC_RTCCLKSOURCE_HSE_DIV3 ((uint32_t)0x00030300)
+#define RCC_RTCCLKSOURCE_HSE_DIV4 ((uint32_t)0x00040300)
+#define RCC_RTCCLKSOURCE_HSE_DIV5 ((uint32_t)0x00050300)
+#define RCC_RTCCLKSOURCE_HSE_DIV6 ((uint32_t)0x00060300)
+#define RCC_RTCCLKSOURCE_HSE_DIV7 ((uint32_t)0x00070300)
+#define RCC_RTCCLKSOURCE_HSE_DIV8 ((uint32_t)0x00080300)
+#define RCC_RTCCLKSOURCE_HSE_DIV9 ((uint32_t)0x00090300)
+#define RCC_RTCCLKSOURCE_HSE_DIV10 ((uint32_t)0x000A0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV11 ((uint32_t)0x000B0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV12 ((uint32_t)0x000C0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV13 ((uint32_t)0x000D0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV14 ((uint32_t)0x000E0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV15 ((uint32_t)0x000F0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV16 ((uint32_t)0x00100300)
+#define RCC_RTCCLKSOURCE_HSE_DIV17 ((uint32_t)0x00110300)
+#define RCC_RTCCLKSOURCE_HSE_DIV18 ((uint32_t)0x00120300)
+#define RCC_RTCCLKSOURCE_HSE_DIV19 ((uint32_t)0x00130300)
+#define RCC_RTCCLKSOURCE_HSE_DIV20 ((uint32_t)0x00140300)
+#define RCC_RTCCLKSOURCE_HSE_DIV21 ((uint32_t)0x00150300)
+#define RCC_RTCCLKSOURCE_HSE_DIV22 ((uint32_t)0x00160300)
+#define RCC_RTCCLKSOURCE_HSE_DIV23 ((uint32_t)0x00170300)
+#define RCC_RTCCLKSOURCE_HSE_DIV24 ((uint32_t)0x00180300)
+#define RCC_RTCCLKSOURCE_HSE_DIV25 ((uint32_t)0x00190300)
+#define RCC_RTCCLKSOURCE_HSE_DIV26 ((uint32_t)0x001A0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV27 ((uint32_t)0x001B0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV28 ((uint32_t)0x001C0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV29 ((uint32_t)0x001D0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV30 ((uint32_t)0x001E0300)
+#define RCC_RTCCLKSOURCE_HSE_DIV31 ((uint32_t)0x001F0300)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_I2S_Clock_Source
+ * @{
+ */
+#define RCC_I2SCLKSOURCE_PLLI2S ((uint32_t)0x00000000)
+#define RCC_I2SCLKSOURCE_EXT ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCO_Index
+ * @{
+ */
+#define RCC_MCO1 ((uint32_t)0x00000000)
+#define RCC_MCO2 ((uint32_t)0x00000001)
+
+#define IS_RCC_MCO(MCOx) (((MCOx) == RCC_MCO1) || ((MCOx) == RCC_MCO2))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCO1_Clock_Source
+ * @{
+ */
+#define RCC_MCO1SOURCE_HSI ((uint32_t)0x00000000)
+#define RCC_MCO1SOURCE_LSE RCC_CFGR_MCO1_0
+#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCO1_1
+#define RCC_MCO1SOURCE_PLLCLK RCC_CFGR_MCO1
+
+#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_HSI) || ((SOURCE) == RCC_MCO1SOURCE_LSE) || \
+ ((SOURCE) == RCC_MCO1SOURCE_HSE) || ((SOURCE) == RCC_MCO1SOURCE_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCO2_Clock_Source
+ * @{
+ */
+#define RCC_MCO2SOURCE_SYSCLK ((uint32_t)0x00000000)
+#define RCC_MCO2SOURCE_PLLI2SCLK RCC_CFGR_MCO2_0
+#define RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2_1
+#define RCC_MCO2SOURCE_PLLCLK RCC_CFGR_MCO2
+
+#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2SOURCE_SYSCLK) || ((SOURCE) == RCC_MCO2SOURCE_PLLI2SCLK)|| \
+ ((SOURCE) == RCC_MCO2SOURCE_HSE) || ((SOURCE) == RCC_MCO2SOURCE_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCOx_Clock_Prescaler
+ * @{
+ */
+#define RCC_MCODIV_1 ((uint32_t)0x00000000)
+#define RCC_MCODIV_2 RCC_CFGR_MCO1PRE_2
+#define RCC_MCODIV_3 ((uint32_t)RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_2)
+#define RCC_MCODIV_4 ((uint32_t)RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2)
+#define RCC_MCODIV_5 RCC_CFGR_MCO1PRE
+
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1) || ((DIV) == RCC_MCODIV_2) || \
+ ((DIV) == RCC_MCODIV_3) || ((DIV) == RCC_MCODIV_4) || \
+ ((DIV) == RCC_MCODIV_5))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Interrupt
+ * @{
+ */
+#define RCC_IT_LSIRDY ((uint8_t)0x01)
+#define RCC_IT_LSERDY ((uint8_t)0x02)
+#define RCC_IT_HSIRDY ((uint8_t)0x04)
+#define RCC_IT_HSERDY ((uint8_t)0x08)
+#define RCC_IT_PLLRDY ((uint8_t)0x10)
+#define RCC_IT_PLLI2SRDY ((uint8_t)0x20)
+#define RCC_IT_CSS ((uint8_t)0x80)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flag
+ * Elements values convention: 0XXYYYYYb
+ * - YYYYY : Flag position in the register
+ * - 0XX : Register index
+ * - 01: CR register
+ * - 10: BDCR register
+ * - 11: CSR register
+ * @{
+ */
+/* Flags in the CR register */
+#define RCC_FLAG_HSIRDY ((uint8_t)0x21)
+#define RCC_FLAG_HSERDY ((uint8_t)0x31)
+#define RCC_FLAG_PLLRDY ((uint8_t)0x39)
+#define RCC_FLAG_PLLI2SRDY ((uint8_t)0x3B)
+
+/* Flags in the BDCR register */
+#define RCC_FLAG_LSERDY ((uint8_t)0x41)
+
+/* Flags in the CSR register */
+#define RCC_FLAG_LSIRDY ((uint8_t)0x61)
+#define RCC_FLAG_BORRST ((uint8_t)0x79)
+#define RCC_FLAG_PINRST ((uint8_t)0x7A)
+#define RCC_FLAG_PORRST ((uint8_t)0x7B)
+#define RCC_FLAG_SFTRST ((uint8_t)0x7C)
+#define RCC_FLAG_IWDGRST ((uint8_t)0x7D)
+#define RCC_FLAG_WWDGRST ((uint8_t)0x7E)
+#define RCC_FLAG_LPWRRST ((uint8_t)0x7F)
+
+#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Enable or disable the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __GPIOA_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOAEN))
+#define __GPIOB_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOBEN))
+#define __GPIOC_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOCEN))
+#define __GPIOD_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIODEN))
+#define __GPIOE_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOEEN))
+#define __GPIOF_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOFEN))
+#define __GPIOG_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOGEN))
+#define __GPIOH_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOHEN))
+#define __CRC_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_CRCEN))
+#define __BKPSRAM_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_BKPSRAMEN))
+#define __CCMDATARAMEN_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_CCMDATARAMEN))
+#define __DMA1_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_DMA1EN))
+#define __DMA2_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_DMA2EN))
+
+#define __GPIOA_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOAEN))
+#define __GPIOB_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOBEN))
+#define __GPIOC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOCEN))
+#define __GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN))
+#define __GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN))
+#define __GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
+#define __GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
+#define __GPIOH_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOHEN))
+#define __CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN))
+#define __BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
+#define __CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN))
+#define __DMA1_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA1EN))
+#define __DMA2_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2EN))
+
+/** @brief Enable or disable the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\
+ __SYSCFG_CLK_ENABLE();\
+ }while(0)
+
+
+#define __USB_OTG_FS_CLK_DISABLE() do { (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN));\
+ __SYSCFG_CLK_DISABLE();\
+ }while(0)
+
+#define __RNG_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_RNGEN))
+#define __RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN))
+/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __TIM2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM2EN))
+#define __TIM3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM3EN))
+#define __TIM4_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM4EN))
+#define __TIM5_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM5EN))
+#define __WWDG_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_WWDGEN))
+#define __SPI2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI2EN))
+#define __SPI3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI3EN))
+#define __USART2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART2EN))
+#define __I2C1_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C1EN))
+#define __I2C2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C2EN))
+#define __I2C3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C3EN))
+#define __PWR_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_PWREN))
+
+#define __TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+#define __TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN))
+#define __WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
+#define __SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+#define __SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN))
+#define __I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN))
+#define __I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+#define __I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
+#define __PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN))
+
+/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __TIM1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM1EN))
+#define __USART1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART1EN))
+#define __USART6_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART6EN))
+#define __ADC1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_ADC1EN))
+#define __SDIO_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SDIOEN))
+#define __SPI1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI1EN))
+#define __SPI4_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI4EN))
+#define __SYSCFG_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SYSCFGEN))
+#define __TIM9_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM9EN))
+#define __TIM10_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM10EN))
+#define __TIM11_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM11EN))
+
+#define __TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN))
+#define __USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
+#define __USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN))
+#define __ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN))
+#define __SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN))
+#define __SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#define __SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
+#define __SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN))
+#define __TIM9_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM9EN))
+#define __TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN))
+#define __TIM11_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM11EN))
+
+/** @brief Force or release AHB1 peripheral reset.
+ */
+#define __AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0xFFFFFFFF)
+#define __GPIOA_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOARST))
+#define __GPIOB_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOBRST))
+#define __GPIOC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOCRST))
+#define __GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST))
+#define __GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST))
+#define __GPIOH_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOHRST))
+#define __CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST))
+#define __DMA1_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA1RST))
+#define __DMA2_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2RST))
+
+#define __AHB1_RELEASE_RESET() (RCC->AHB1RSTR = 0x00)
+#define __GPIOA_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOARST))
+#define __GPIOB_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOBRST))
+#define __GPIOC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOCRST))
+#define __GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST))
+#define __GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST))
+#define __GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
+#define __GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
+#define __GPIOH_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOHRST))
+#define __GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST))
+#define __CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST))
+#define __DMA1_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA1RST))
+#define __DMA2_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2RST))
+
+/** @brief Force or release AHB2 peripheral reset.
+ */
+#define __AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFF)
+#define __USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST))
+
+#define __AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00)
+#define __USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST))
+
+/* alias define maintained for legacy */
+#define __OTGFS_FORCE_RESET __USB_OTG_FS_FORCE_RESET
+#define __OTGFS_RELEASE_RESET __USB_OTG_FS_RELEASE_RESET
+
+#define __RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST))
+#define __RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST))
+
+/** @brief Force or release APB1 peripheral reset.
+ */
+#define __APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFF)
+#define __TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+#define __TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST))
+#define __WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST))
+#define __SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+#define __SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST))
+#define __I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST))
+#define __I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+#define __I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
+#define __PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST))
+
+#define __APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00)
+#define __TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+#define __TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST))
+#define __WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST))
+#define __SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+#define __SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST))
+#define __I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST))
+#define __I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+#define __I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
+#define __PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST))
+
+/** @brief Force or release APB2 peripheral reset.
+ */
+#define __APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFF)
+#define __TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST))
+#define __USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST))
+#define __USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST))
+#define __ADC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADCRST))
+#define __SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST))
+#define __SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+#define __SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
+#define __SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST))
+#define __TIM9_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM9RST))
+#define __TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST))
+#define __TIM11_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM11RST))
+
+#define __APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00)
+#define __TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST))
+#define __USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST))
+#define __USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST))
+#define __ADC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADCRST))
+#define __SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST))
+#define __SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#define __SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
+#define __SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST))
+#define __TIM9_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM9RST))
+#define __TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST))
+#define __TIM11_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM11RST))
+
+/** @brief Force or release AHB3 peripheral reset.
+ */
+#define __AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFF)
+#define __AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00)
+
+/** @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __GPIOA_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOALPEN))
+#define __GPIOB_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOBLPEN))
+#define __GPIOC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOCLPEN))
+#define __GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN))
+#define __GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN))
+#define __GPIOH_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOHLPEN))
+#define __CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN))
+#define __FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN))
+#define __SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN))
+#define __BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN))
+#define __DMA1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA1LPEN))
+#define __DMA2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2LPEN))
+
+#define __GPIOA_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOALPEN))
+#define __GPIOB_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOBLPEN))
+#define __GPIOC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOCLPEN))
+#define __GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN))
+#define __GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN))
+#define __GPIOH_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOHLPEN))
+#define __CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN))
+#define __FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN))
+#define __SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN))
+#define __BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN))
+#define __DMA1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA1LPEN))
+#define __DMA2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2LPEN))
+
+/** @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN))
+
+#define __USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN))
+
+/* alias define maintained for legacy */
+#define __OTGFS_CLK_SLEEP_ENABLE __USB_OTG_FS_CLK_SLEEP_ENABLE
+#define __OTGFS_CLK_SLEEP_DISABLE __USB_OTG_FS_CLK_SLEEP_DISABLE
+
+#define __RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN))
+#define __RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN))
+
+/** @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN))
+#define __TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN))
+#define __TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN))
+#define __TIM5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM5LPEN))
+#define __WWDG_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_WWDGLPEN))
+#define __SPI2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI2LPEN))
+#define __SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN))
+#define __USART2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART2LPEN))
+#define __I2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C1LPEN))
+#define __I2C2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C2LPEN))
+#define __I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN))
+#define __PWR_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_PWRLPEN))
+
+#define __TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN))
+#define __TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN))
+#define __TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN))
+#define __TIM5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM5LPEN))
+#define __WWDG_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_WWDGLPEN))
+#define __SPI2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI2LPEN))
+#define __SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN))
+#define __USART2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART2LPEN))
+#define __I2C1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C1LPEN))
+#define __I2C2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C2LPEN))
+#define __I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN))
+#define __PWR_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_PWRLPEN))
+
+/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __TIM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM1LPEN))
+#define __USART1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART1LPEN))
+#define __USART6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART6LPEN))
+#define __ADC1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC1LPEN))
+#define __SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN))
+#define __SPI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI1LPEN))
+#define __SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN))
+#define __SYSCFG_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SYSCFGLPEN))
+#define __TIM9_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM9LPEN))
+#define __TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN))
+#define __TIM11_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM11LPEN))
+
+#define __TIM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM1LPEN))
+#define __USART1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART1LPEN))
+#define __USART6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART6LPEN))
+#define __ADC1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC1LPEN))
+#define __SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN))
+#define __SPI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI1LPEN))
+#define __SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN))
+#define __SYSCFG_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SYSCFGLPEN))
+#define __TIM9_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM9LPEN))
+#define __TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN))
+#define __TIM11_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM11LPEN))
+
+/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI).
+ * @note The HSI is stopped by hardware when entering STOP and STANDBY modes.
+ * It is used (enabled by hardware) as system clock source after startup
+ * from Reset, wakeup from STOP and STANDBY mode, or in case of failure
+ * of the HSE used directly or indirectly as system clock (if the Clock
+ * Security System CSS is enabled).
+ * @note HSI can not be stopped if it is used as system clock source. In this case,
+ * you have to select another source of the system clock then stop the HSI.
+ * @note After enabling the HSI, the application software should wait on HSIRDY
+ * flag to be set indicating that HSI clock is stable and can be used as
+ * system clock source.
+ * This parameter can be: ENABLE or DISABLE.
+ * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_HSI_ENABLE() (*(__IO uint32_t *) CR_HSION_BB = ENABLE)
+#define __HAL_RCC_HSI_DISABLE() (*(__IO uint32_t *) CR_HSION_BB = DISABLE)
+
+/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
+ * @note The calibration is used to compensate for the variations in voltage
+ * and temperature that influence the frequency of the internal HSI RC.
+ * @param __HSICalibrationValue__: specifies the calibration trimming value.
+ * This parameter must be a number between 0 and 0x1F.
+ */
+#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) (MODIFY_REG(RCC->CR,\
+ RCC_CR_HSITRIM, (uint32_t)(__HSICalibrationValue__) << POSITION_VAL(RCC_CR_HSITRIM)))
+
+/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI).
+ * @note After enabling the LSI, the application software should wait on
+ * LSIRDY flag to be set indicating that LSI clock is stable and can
+ * be used to clock the IWDG and/or the RTC.
+ * @note LSI can not be disabled if the IWDG is running.
+ * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_LSI_ENABLE() (*(__IO uint32_t *) CSR_LSION_BB = ENABLE)
+#define __HAL_RCC_LSI_DISABLE() (*(__IO uint32_t *) CSR_LSION_BB = DISABLE)
+
+/**
+ * @brief Macro to configure the External High Speed oscillator (HSE).
+ * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application
+ * software should wait on HSERDY flag to be set indicating that HSE clock
+ * is stable and can be used to clock the PLL and/or system clock.
+ * @note HSE state can not be changed if it is used directly or through the
+ * PLL as system clock. In this case, you have to select another source
+ * of the system clock then change the HSE state (ex. disable it).
+ * @note The HSE is stopped by hardware when entering STOP and STANDBY modes.
+ * @note This function reset the CSSON bit, so if the clock security system(CSS)
+ * was previously enabled you have to enable it again after calling this
+ * function.
+ * @param __STATE__: specifies the new state of the HSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after
+ * 6 HSE oscillator clock cycles.
+ * @arg RCC_HSE_ON: turn ON the HSE oscillator.
+ * @arg RCC_HSE_BYPASS: HSE oscillator bypassed with external clock.
+ */
+#define __HAL_RCC_HSE_CONFIG(__STATE__) (*(__IO uint8_t *) CR_BYTE2_ADDRESS = (__STATE__))
+
+/**
+ * @brief Macro to configure the External Low Speed oscillator (LSE).
+ * @note As the LSE is in the Backup domain and write access is denied to
+ * this domain after reset, you have to enable write access using
+ * HAL_PWR_EnableBkUpAccess() function before to configure the LSE
+ * (to be done once after reset).
+ * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application
+ * software should wait on LSERDY flag to be set indicating that LSE clock
+ * is stable and can be used to clock the RTC.
+ * @param __STATE__: specifies the new state of the LSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after
+ * 6 LSE oscillator clock cycles.
+ * @arg RCC_LSE_ON: turn ON the LSE oscillator.
+ * @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock.
+ */
+#define __HAL_RCC_LSE_CONFIG(__STATE__) (*(__IO uint8_t *) BDCR_BYTE0_ADDRESS = (__STATE__))
+
+/** @brief Macros to enable or disable the the RTC clock.
+ * @note These macros must be used only after the RTC clock source was selected.
+ */
+#define __HAL_RCC_RTC_ENABLE() (*(__IO uint32_t *) BDCR_RTCEN_BB = ENABLE)
+#define __HAL_RCC_RTC_DISABLE() (*(__IO uint32_t *) BDCR_RTCEN_BB = DISABLE)
+
+/** @brief Macros to configure the RTC clock (RTCCLK).
+ * @note As the RTC clock configuration bits are in the Backup domain and write
+ * access is denied to this domain after reset, you have to enable write
+ * access using the Power Backup Access macro before to configure
+ * the RTC clock source (to be done once after reset).
+ * @note Once the RTC clock is configured it can't be changed unless the
+ * Backup domain is reset using __HAL_RCC_BackupReset_RELEASE() macro, or by
+ * a Power On Reset (POR).
+ * @param __RTCCLKSource__: specifies the RTC clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock.
+ * @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock.
+ * @arg RCC_RTCCLKSOURCE_HSE_DIVx: HSE clock divided by x selected
+ * as RTC clock, where x:[2,31]
+ * @note If the LSE or LSI is used as RTC clock source, the RTC continues to
+ * work in STOP and STANDBY modes, and can be used as wakeup source.
+ * However, when the HSE clock is used as RTC clock source, the RTC
+ * cannot be used in STOP and STANDBY modes.
+ * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as
+ * RTC clock source).
+ */
+#define __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__) (((__RTCCLKSource__) & RCC_BDCR_RTCSEL) == RCC_BDCR_RTCSEL) ? \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, ((__RTCCLKSource__) & 0xFFFFCFF)) : CLEAR_BIT(RCC->CFGR, RCC_CFGR_RTCPRE)
+
+#define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) do { __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__); \
+ RCC->BDCR |= ((__RTCCLKSource__) & 0x00000FFF); \
+ } while (0)
+
+/** @brief Macros to force or release the Backup domain reset.
+ * @note This function resets the RTC peripheral (including the backup registers)
+ * and the RTC clock source selection in RCC_CSR register.
+ * @note The BKPSRAM is not affected by this reset.
+ */
+#define __HAL_RCC_BACKUPRESET_FORCE() (*(__IO uint32_t *) BDCR_BDRST_BB = ENABLE)
+#define __HAL_RCC_BACKUPRESET_RELEASE() (*(__IO uint32_t *) BDCR_BDRST_BB = DISABLE)
+
+/** @brief Macros to enable or disable the main PLL.
+ * @note After enabling the main PLL, the application software should wait on
+ * PLLRDY flag to be set indicating that PLL clock is stable and can
+ * be used as system clock source.
+ * @note The main PLL can not be disabled if it is used as system clock source
+ * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLL_ENABLE() (*(__IO uint32_t *) CR_PLLON_BB = ENABLE)
+#define __HAL_RCC_PLL_DISABLE() (*(__IO uint32_t *) CR_PLLON_BB = DISABLE)
+
+/** @brief Macro to configure the main PLL clock source, multiplication and division factors.
+ * @note This function must be used only when the main PLL is disabled.
+ * @param __RCC_PLLSource__: specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
+ * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+ * @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S.
+ * @param __PLLM__: specifies the division factor for PLL VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note You have to set the PLLM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 2 MHz to limit PLL jitter.
+ * @param __PLLN__: specifies the multiplication factor for PLL VCO output clock
+ * This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+ * @note You have to set the PLLN parameter correctly to ensure that the VCO
+ * output frequency is between 192 and 432 MHz.
+ * @param __PLLP__: specifies the division factor for main system clock (SYSCLK)
+ * This parameter must be a number in the range {2, 4, 6, or 8}.
+ * @note You have to set the PLLP parameter correctly to not exceed 168 MHz on
+ * the System clock frequency.
+ * @param __PLLQ__: specifies the division factor for OTG FS, SDIO and RNG clocks
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ * @note If the USB OTG FS is used in your application, you have to set the
+ * PLLQ parameter correctly to have 48 MHz clock for the USB. However,
+ * the SDIO and RNG need a frequency lower than or equal to 48 MHz to work
+ * correctly.
+ */
+#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__)\
+ (RCC->PLLCFGR = (0x20000000 | (__PLLM__) | ((__PLLN__) << POSITION_VAL(RCC_PLLCFGR_PLLN)) | \
+ ((((__PLLP__) >> 1) -1) << POSITION_VAL(RCC_PLLCFGR_PLLP)) | (__RCC_PLLSource__) | \
+ ((__PLLQ__) << POSITION_VAL(RCC_PLLCFGR_PLLQ))))
+
+/** @brief Macro to configure the I2S clock source (I2SCLK).
+ * @note This function must be called before enabling the I2S APB clock.
+ * @param __SOURCE__: specifies the I2S clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2SCLKSOURCE_PLLI2S: PLLI2S clock used as I2S clock source.
+ * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source.
+ */
+#define __HAL_RCC_I2SCLK(__SOURCE__) (*(__IO uint32_t *) CFGR_I2SSRC_BB = (__SOURCE__))
+
+/** @brief Macros to enable or disable the PLLI2S.
+ * @note The PLLI2S is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLLI2S_ENABLE() (*(__IO uint32_t *) CR_PLLI2SON_BB = ENABLE)
+#define __HAL_RCC_PLLI2S_DISABLE() (*(__IO uint32_t *) CR_PLLI2SON_BB = DISABLE)
+
+/** @brief Macro to configure the PLLI2S clock multiplication and division factors .
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note PLLI2S clock source is common with the main PLL (configured in
+ * HAL_RCC_ClockConfig() API).
+ * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock
+ * This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+ * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
+ * @param __PLLI2SR__: specifies the division factor for I2S clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+ * on the I2S clock frequency.
+ */
+#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SN__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN)) | ((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR)))
+
+/** @brief Macro to get the clock source used as system clock.
+ * @retval The clock source used as system clock. The returned value can be one
+ * of the following:
+ * - RCC_CFGR_SWS_HSI: HSI used as system clock.
+ * - RCC_CFGR_SWS_HSE: HSE used as system clock.
+ * - RCC_CFGR_SWS_PLL: PLL used as system clock.
+ */
+#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(RCC->CFGR & RCC_CFGR_SWS))
+
+/** @brief Macro to get the oscillator used as PLL clock source.
+ * @retval The oscillator used as PLL clock source. The returned value can be one
+ * of the following:
+ * - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source.
+ * - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source.
+ */
+#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC))
+
+/** @brief Enable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to enable
+ * the selected interrupts).
+ * @param __INTERRUPT__: specifies the RCC interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ */
+#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) CIR_BYTE1_ADDRESS |= (__INTERRUPT__))
+
+/** @brief Disable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to disable
+ * the selected interrupts).
+ * @param __INTERRUPT__: specifies the RCC interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ */
+#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) CIR_BYTE1_ADDRESS &= ~(__INTERRUPT__))
+
+/** @brief Clear the RCC's interrupt pending bits (Perform Byte access to RCC_CIR[23:16]
+ * bits to clear the selected interrupt pending bits.
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ */
+#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) CIR_BYTE2_ADDRESS = (__INTERRUPT__))
+
+/** @brief Check the RCC's interrupt has occurred or not.
+ * @param __INTERRUPT__: specifies the RCC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt.
+ * @arg RCC_IT_LSERDY: LSE ready interrupt.
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt.
+ * @arg RCC_IT_HSERDY: HSE ready interrupt.
+ * @arg RCC_IT_PLLRDY: Main PLL ready interrupt.
+ * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt.
+ * @arg RCC_IT_CSS: Clock Security System interrupt
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/** @brief Set RMVF bit to clear the reset flags: RCC_FLAG_PINRST, RCC_FLAG_PORRST,
+ * RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST and RCC_FLAG_LPWRRST.
+ */
+#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF)
+
+/** @brief Check RCC flag is set or not.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready.
+ * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready.
+ * @arg RCC_FLAG_PLLRDY: Main PLL clock ready.
+ * @arg RCC_FLAG_PLLI2SRDY: PLLI2S clock ready.
+ * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready.
+ * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready.
+ * @arg RCC_FLAG_BORRST: POR/PDR or BOR reset.
+ * @arg RCC_FLAG_PINRST: Pin reset.
+ * @arg RCC_FLAG_PORRST: POR/PDR reset.
+ * @arg RCC_FLAG_SFTRST: Software reset.
+ * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset.
+ * @arg RCC_FLAG_WWDGRST: Window Watchdog reset.
+ * @arg RCC_FLAG_LPWRRST: Low Power reset.
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define RCC_FLAG_MASK ((uint8_t)0x1F)
+#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5) == 1)? RCC->CR :((((__FLAG__) >> 5) == 2) ? RCC->BDCR :((((__FLAG__) >> 5) == 3)? RCC->CSR :RCC->CIR))) & ((uint32_t)1 << ((__FLAG__) & RCC_FLAG_MASK)))!= 0)? 1 : 0)
+
+#define __RCC_PLLSRC() ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> POSITION_VAL(RCC_PLLCFGR_PLLSRC))
+
+
+/* Include RCC HAL Extension module */
+#include "stm32f4xx_hal_rcc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions ******************************/
+void HAL_RCC_DeInit(void);
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency);
+
+/* Peripheral Control functions ************************************************/
+void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv);
+void HAL_RCC_EnableCSS(void);
+void HAL_RCC_DisableCSS(void);
+uint32_t HAL_RCC_GetSysClockFreq(void);
+uint32_t HAL_RCC_GetHCLKFreq(void);
+uint32_t HAL_RCC_GetPCLK1Freq(void);
+uint32_t HAL_RCC_GetPCLK2Freq(void);
+void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency);
+
+/* CSS NMI IRQ handler */
+void HAL_RCC_NMI_IRQHandler(void);
+
+/* User Callbacks in non blocking mode (IT mode) */
+void HAL_RCC_CCSCallback(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_RCC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_rcc_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1165 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rcc_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of RCC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RCC_EX_H
+#define __STM32F4xx_HAL_RCC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+/**
+ * @brief PLLI2S Clock structure definition
+ */
+typedef struct
+{
+ uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+ This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+}RCC_PLLI2SInitTypeDef;
+
+/**
+ * @brief PLLSAI Clock structure definition
+ */
+typedef struct
+{
+ uint32_t PLLSAIN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+ This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+ This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */
+
+ uint32_t PLLSAIQ; /*!< Specifies the division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */
+
+ uint32_t PLLSAIR; /*!< specifies the division factor for LTDC clock
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ This parameter will be used only when PLLSAI is selected as Clock Source LTDC */
+
+}RCC_PLLSAIInitTypeDef;
+/**
+ * @brief RCC extended clocks structure definition
+ */
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ RCC_PLLSAIInitTypeDef PLLSAI; /*!< PLL SAI structure parameters.
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */
+
+ uint32_t PLLI2SDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 32
+ This parameter will be used only when PLLI2S is selected as Clock Source SAI */
+
+ uint32_t PLLSAIDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 32
+ This parameter will be used only when PLLSAI is selected as Clock Source SAI */
+
+ uint32_t PLLSAIDivR; /*!< Specifies the PLLSAI division factor for LTDC clock.
+ This parameter must be one value of @ref RCCEx_PLLSAI_DIVR */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection.
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint8_t TIMPresSelection; /*!< Specifies TIM Clock Prescalers Selection.
+ This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+/**
+ * @brief PLLI2S Clock structure definition
+ */
+typedef struct
+{
+#if defined(STM32F411xE)
+ uint32_t PLLI2SM; /*!< PLLM: Division factor for PLLI2S VCO input clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 62 */
+#endif /* STM32F411xE */
+
+ uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock.
+ This parameter must be a number between Min_Data = 192 and Max_Data = 432
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock.
+ This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+}RCC_PLLI2SInitTypeDef;
+
+
+/**
+ * @brief RCC extended clocks structure definition
+ */
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters.
+ This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection.
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Constants
+ * @{
+ */
+
+/** @defgroup RCCEx_Periph_Clock_Selection
+ * @{
+ */
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_SAI_PLLI2S ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_SAI_PLLSAI ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_LTDC ((uint32_t)0x00000008)
+#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000010)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000020)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x0000002F))
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000002)
+#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x00000003))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_BitAddress_AliasRegion
+ * @brief RCC registers bit address in the alias region
+ * @{
+ */
+/* --- CR Register ---*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+/* Alias word address of PLLSAION bit */
+#define PLLSAION_BitNumber 0x1C
+#define CR_PLLSAION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (PLLSAION_BitNumber * 4))
+
+/* --- DCKCFGR Register ---*/
+/* Alias word address of TIMPRE bit */
+#define RCC_DCKCFGR_OFFSET (RCC_OFFSET + 0x8C)
+#define TIMPRE_BitNumber 0x18
+#define DCKCFGR_TIMPRE_BB (PERIPH_BB_BASE + (RCC_DCKCFGR_OFFSET * 32) + (TIMPRE_BitNumber * 4))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_PLLI2S_Clock_Source
+ * @{
+ */
+#define IS_RCC_PLLI2SQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_PLLSAI_Clock_Source
+ * @{
+ */
+#define IS_RCC_PLLSAIN_VALUE(VALUE) ((192 <= (VALUE)) && ((VALUE) <= 432))
+#define IS_RCC_PLLSAIQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15))
+#define IS_RCC_PLLSAIR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_PLLSAI_DIVQ
+ * @{
+ */
+#define IS_RCC_PLLSAI_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_PLLI2S_DIVQ
+ * @{
+ */
+#define IS_RCC_PLLI2S_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_PLLSAI_DIVR
+ * @{
+ */
+#define RCC_PLLSAIDIVR_2 ((uint32_t)0x00000000)
+#define RCC_PLLSAIDIVR_4 ((uint32_t)0x00010000)
+#define RCC_PLLSAIDIVR_8 ((uint32_t)0x00020000)
+#define RCC_PLLSAIDIVR_16 ((uint32_t)0x00030000)
+#define IS_RCC_PLLSAI_DIVR_VALUE(VALUE) (((VALUE) == RCC_PLLSAIDIVR_2) ||\
+ ((VALUE) == RCC_PLLSAIDIVR_4) ||\
+ ((VALUE) == RCC_PLLSAIDIVR_8) ||\
+ ((VALUE) == RCC_PLLSAIDIVR_16))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SAI_BlockA_Clock_Source
+ * @{
+ */
+#define RCC_SAIACLKSOURCE_PLLSAI ((uint32_t)0x00000000)
+#define RCC_SAIACLKSOURCE_PLLI2S ((uint32_t)0x00100000)
+#define RCC_SAIACLKSOURCE_EXT ((uint32_t)0x00200000)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SAI_BlockB_Clock_Source
+ * @{
+ */
+#define RCC_SAIBCLKSOURCE_PLLSAI ((uint32_t)0x00000000)
+#define RCC_SAIBCLKSOURCE_PLLI2S ((uint32_t)0x00400000)
+#define RCC_SAIBCLKSOURCE_EXT ((uint32_t)0x00800000)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM_PRescaler_Selection
+ * @{
+ */
+#define RCC_TIMPRES_DESACTIVATED ((uint8_t)0x00)
+#define RCC_TIMPRES_ACTIVATED ((uint8_t)0x01)
+/**
+ * @}
+ */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F411xE)
+/** @defgroup RCCEx_PLLI2S_PLLI2SM
+ * @{
+ */
+#define IS_RCC_PLLI2SM_VALUE(VALUE) ((VALUE) <= 63)
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_LSE_Dual_Mode_Selection
+ * @{
+ */
+#define RCC_LSE_LOWPOWER_MODE ((uint8_t)0x00)
+#define RCC_LSE_HIGHDRIVE_MODE ((uint8_t)0x01)
+#define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\
+ ((MODE) == RCC_LSE_HIGHDRIVE_MODE))
+/**
+ * @}
+ */
+
+#endif /* STM32F411xE */
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/*----------------------------------- STM32F42xxx/STM32F43xxx----------------------------------*/
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+/** @brief Enables or disables the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __GPIOI_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOIEN))
+#define __GPIOF_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOFEN))
+#define __GPIOG_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOGEN))
+#define __GPIOJ_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOJEN))
+#define __GPIOK_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOKEN))
+#define __DMA2D_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_DMA2DEN))
+#define __ETHMAC_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACEN))
+#define __ETHMACTX_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACTXEN))
+#define __ETHMACRX_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACRXEN))
+#define __ETHMACPTP_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACPTPEN))
+#define __USB_OTG_HS_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_OTGHSEN))
+#define __USB_OTG_HS_ULPI_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_OTGHSULPIEN))
+
+#define __GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
+#define __GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
+#define __GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN))
+#define __GPIOJ_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOJEN))
+#define __GPIOK_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOKEN))
+#define __DMA2D_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2DEN))
+#define __ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN))
+#define __ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN))
+#define __ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN))
+#define __ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN))
+#define __USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN))
+#define __USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN))
+
+/**
+ * @brief Enable ETHERNET clock.
+ */
+#define __ETH_CLK_ENABLE() do { \
+ __ETHMAC_CLK_ENABLE(); \
+ __ETHMACTX_CLK_ENABLE(); \
+ __ETHMACRX_CLK_ENABLE(); \
+ } while(0)
+/**
+ * @brief Disable ETHERNET clock.
+ */
+#define __ETH_CLK_DISABLE() do { \
+ __ETHMACTX_CLK_DISABLE(); \
+ __ETHMACRX_CLK_DISABLE(); \
+ __ETHMAC_CLK_DISABLE(); \
+ } while(0)
+
+/** @brief Enable or disable the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+
+#define __DCMI_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_DCMIEN))
+#define __DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN))
+
+#if defined(STM32F437xx)|| defined(STM32F439xx)
+#define __CRYP_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_CRYPEN))
+#define __HASH_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_HASHEN))
+
+#define __CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN))
+#define __HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN))
+#endif /* STM32F437xx || STM32F439xx */
+
+/** @brief Enables or disables the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __FMC_CLK_ENABLE() (RCC->AHB3ENR |= (RCC_AHB3ENR_FMCEN))
+#define __FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN))
+
+/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __TIM6_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM6EN))
+#define __TIM7_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM7EN))
+#define __TIM12_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM12EN))
+#define __TIM13_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM13EN))
+#define __TIM14_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM14EN))
+#define __WWDG_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_WWDGEN))
+#define __USART3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART3EN))
+#define __UART4_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART4EN))
+#define __UART5_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART5EN))
+#define __CAN1_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CAN1EN))
+#define __CAN2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CAN2EN))
+#define __DAC_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_DACEN))
+#define __UART7_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART7EN))
+#define __UART8_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART8EN))
+
+#define __TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
+#define __USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
+#define __UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
+#define __CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
+#define __CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
+#define __DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+#define __UART7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART7EN))
+#define __UART8_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART8EN))
+
+/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __TIM8_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM8EN))
+#define __ADC2_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_ADC2EN))
+#define __ADC3_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_ADC3EN))
+#define __SPI5_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI5EN))
+#define __SPI6_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI6EN))
+#define __SAI1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SAI1EN))
+
+#define __TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
+#define __ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
+#define __ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
+#define __SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN))
+#define __SPI6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI6EN))
+#define __SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN))
+
+#if defined(STM32F429xx)|| defined(STM32F439xx)
+#define __LTDC_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_LTDCEN))
+
+#define __LTDC_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_LTDCEN))
+#endif /* STM32F429xx || STM32F439xx */
+
+/** @brief Force or release AHB1 peripheral reset.
+ */
+#define __GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
+#define __GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
+#define __GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST))
+#define __ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST))
+#define __OTGHS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST))
+#define __GPIOJ_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOJRST))
+#define __GPIOK_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOKRST))
+#define __DMA2D_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2DRST))
+
+#define __GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
+#define __GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
+#define __GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST))
+#define __ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST))
+#define __OTGHS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST))
+#define __GPIOJ_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOJRST))
+#define __GPIOK_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOKRST))
+#define __DMA2D_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2DRST))
+
+/** @brief Force or release AHB2 peripheral reset.
+ */
+#define __DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST))
+#define __DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST))
+
+#if defined(STM32F437xx)|| defined(STM32F439xx)
+#define __CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST))
+#define __HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST))
+
+#define __CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST))
+#define __HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST))
+#endif /* STM32F437xx || STM32F439xx */
+
+/** @brief Force or release AHB3 peripheral reset
+ */
+#define __FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST))
+#define __FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST))
+
+/** @brief Force or release APB1 peripheral reset.
+ */
+#define __TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
+#define __UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
+#define __CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
+#define __CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
+#define __DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+#define __UART7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART7RST))
+#define __UART8_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART8RST))
+
+#define __TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
+#define __UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
+#define __CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
+#define __CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
+#define __DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+#define __UART7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART7RST))
+#define __UART8_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART8RST))
+
+/** @brief Force or release APB2 peripheral reset.
+ */
+#define __TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
+#define __SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST))
+#define __SPI6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI6RST))
+#define __SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST))
+
+#define __TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
+#define __SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST))
+#define __SPI6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI6RST))
+#define __SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST))
+
+#if defined(STM32F429xx)|| defined(STM32F439xx)
+#define __LTDC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_LTDCRST))
+#define __LTDC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_LTDCRST))
+#endif /* STM32F429xx|| STM32F439xx */
+
+/** @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
+#define __GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
+#define __GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN))
+#define __SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN))
+#define __ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN))
+#define __ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __OTGHS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN))
+#define __OTGHSULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN))
+#define __GPIOJ_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOJLPEN))
+#define __GPIOK_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOKLPEN))
+#define __SRAM3_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM3LPEN))
+#define __DMA2D_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2DLPEN))
+
+#define __GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
+#define __GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
+#define __GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN))
+#define __SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN))
+#define __ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN))
+#define __ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __OTGHS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN))
+#define __OTGHSULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN))
+#define __GPIOJ_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOJLPEN))
+#define __GPIOK_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOKLPEN))
+#define __DMA2D_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2DLPEN))
+
+/** @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN))
+#define __DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN))
+
+#if defined(STM32F437xx)|| defined(STM32F439xx)
+#define __CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN))
+#define __HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN))
+
+#define __CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN))
+#define __HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN))
+#endif /* STM32F437xx || STM32F439xx */
+
+/** @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN))
+#define __FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN))
+
+/** @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
+#define __TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
+#define __TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
+#define __TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
+#define __TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
+#define __USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
+#define __UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN))
+#define __UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN))
+#define __CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
+#define __CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
+#define __DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
+#define __UART7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART7LPEN))
+#define __UART8_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART8LPEN))
+
+#define __TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
+#define __TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
+#define __TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
+#define __TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
+#define __TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
+#define __USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
+#define __UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN))
+#define __UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN))
+#define __CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
+#define __CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
+#define __DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
+#define __UART7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART7LPEN))
+#define __UART8_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART8LPEN))
+
+/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
+#define __ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN))
+#define __ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN))
+#define __SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN))
+#define __SPI6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI6LPEN))
+#define __SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN))
+
+#define __TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
+#define __ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN))
+#define __ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN))
+#define __SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN))
+#define __SPI6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI6LPEN))
+#define __SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN))
+
+#if defined(STM32F429xx)|| defined(STM32F439xx)
+#define __LTDC_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_LTDCLPEN))
+
+#define __LTDC_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_LTDCLPEN))
+#endif /* STM32F429xx || STM32F439xx */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
+/*---------------------------------------------------------------------------------------------*/
+
+/*----------------------------------- STM32F40xxx/STM32F41xxx----------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+/** @brief Enables or disables the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __GPIOI_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOIEN))
+#define __GPIOF_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOFEN))
+#define __GPIOG_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOGEN))
+#define __USB_OTG_HS_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_OTGHSEN))
+#define __USB_OTG_HS_ULPI_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_OTGHSULPIEN))
+
+#define __GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN))
+#define __GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN))
+#define __GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN))
+#define __USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN))
+#define __USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN))
+
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+/**
+ * @brief Enable ETHERNET clock.
+ */
+#define __ETHMAC_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACEN))
+#define __ETHMACTX_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACTXEN))
+#define __ETHMACRX_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACRXEN))
+#define __ETHMACPTP_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_ETHMACPTPEN))
+#define __ETH_CLK_ENABLE() do { \
+ __ETHMAC_CLK_ENABLE(); \
+ __ETHMACTX_CLK_ENABLE(); \
+ __ETHMACRX_CLK_ENABLE(); \
+ } while(0)
+
+/**
+ * @brief Disable ETHERNET clock.
+ */
+#define __ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN))
+#define __ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN))
+#define __ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN))
+#define __ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN))
+#define __ETH_CLK_DISABLE() do { \
+ __ETHMACTX_CLK_DISABLE(); \
+ __ETHMACRX_CLK_DISABLE(); \
+ __ETHMAC_CLK_DISABLE(); \
+ } while(0)
+#endif /* STM32F407xx || STM32F417xx */
+
+/** @brief Enable or disable the AHB2 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+#define __DCMI_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_DCMIEN))
+#define __DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN))
+#endif /* STM32F407xx || STM32F417xx */
+
+#if defined(STM32F415xx) || defined(STM32F417xx)
+#define __CRYP_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_CRYPEN))
+#define __HASH_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_HASHEN))
+
+#define __CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN))
+#define __HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN))
+#endif /* STM32F415xx || STM32F417xx */
+
+/** @brief Enables or disables the AHB3 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __FSMC_CLK_ENABLE() (RCC->AHB3ENR |= (RCC_AHB3ENR_FSMCEN))
+#define __FSMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FSMCEN))
+
+/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __TIM6_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM6EN))
+#define __TIM7_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM7EN))
+#define __TIM12_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM12EN))
+#define __TIM13_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM13EN))
+#define __TIM14_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM14EN))
+#define __WWDG_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_WWDGEN))
+#define __USART3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART3EN))
+#define __UART4_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART4EN))
+#define __UART5_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART5EN))
+#define __CAN1_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CAN1EN))
+#define __CAN2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CAN2EN))
+#define __DAC_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_DACEN))
+
+#define __TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
+#define __USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
+#define __UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
+#define __CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN))
+#define __CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN))
+#define __DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+
+/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#define __TIM8_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM8EN))
+#define __ADC2_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_ADC2EN))
+#define __ADC3_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_ADC3EN))
+
+#define __TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
+#define __ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN))
+#define __ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN))
+
+/** @brief Force or release AHB1 peripheral reset.
+ */
+#define __GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST))
+#define __GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST))
+#define __GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST))
+#define __ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST))
+#define __OTGHS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST))
+
+#define __GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST))
+#define __GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST))
+#define __GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST))
+#define __ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST))
+#define __OTGHS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST))
+
+/** @brief Force or release AHB2 peripheral reset.
+ */
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+#define __DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST))
+#define __DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST))
+#endif /* STM32F407xx || STM32F417xx */
+
+#if defined(STM32F415xx) || defined(STM32F417xx)
+#define __CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST))
+#define __HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST))
+
+#define __CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST))
+#define __HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST))
+
+#endif /* STM32F415xx || STM32F417xx */
+
+/** @brief Force or release AHB3 peripheral reset
+ */
+#define __FSMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FSMCRST))
+#define __FSMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FSMCRST))
+
+/** @brief Force or release APB1 peripheral reset.
+ */
+#define __TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
+#define __UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
+#define __CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST))
+#define __CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST))
+#define __DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+
+#define __TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
+#define __UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
+#define __CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST))
+#define __CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST))
+#define __DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+
+/** @brief Force or release APB2 peripheral reset.
+ */
+#define __TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
+#define __TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
+
+/** @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN))
+#define __GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN))
+#define __GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN))
+#define __SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN))
+#define __ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN))
+#define __ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __OTGHS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN))
+#define __OTGHSULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN))
+
+#define __GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN))
+#define __GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN))
+#define __GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN))
+#define __SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN))
+#define __ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN))
+#define __ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN))
+#define __ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN))
+#define __ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN))
+#define __OTGHS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN))
+#define __OTGHSULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN))
+
+/** @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#if defined(STM32F407xx)|| defined(STM32F417xx)
+#define __DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN))
+#define __DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN))
+#endif /* STM32F407xx || STM32F417xx */
+
+#if defined(STM32F415xx) || defined(STM32F417xx)
+#define __CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN))
+#define __HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN))
+
+#define __CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN))
+#define __HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN))
+#endif /* STM32F415xx || STM32F417xx */
+
+/** @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __FSMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FSMCLPEN))
+#define __FSMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FSMCLPEN))
+
+/** @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN))
+#define __TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN))
+#define __TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN))
+#define __TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN))
+#define __TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN))
+#define __USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN))
+#define __UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN))
+#define __UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN))
+#define __CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN))
+#define __CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN))
+#define __DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN))
+
+#define __TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN))
+#define __TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN))
+#define __TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN))
+#define __TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN))
+#define __TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN))
+#define __USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN))
+#define __UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN))
+#define __UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN))
+#define __CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN))
+#define __CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN))
+#define __DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN))
+
+/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ * @note Peripheral clock gating in SLEEP mode can be used to further reduce
+ * power consumption.
+ * @note After wakeup from SLEEP mode, the peripheral clock is enabled again.
+ * @note By default, all peripheral clocks are enabled during SLEEP mode.
+ */
+#define __TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN))
+#define __ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN))
+#define __ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN))
+
+#define __TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN))
+#define __ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN))
+#define __ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN))
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+/*---------------------------------------------------------------------------------------------*/
+
+/*------------------------------------------ STM32F411xx --------------------------------------*/
+#if defined(STM32F411xE)
+/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ */
+#define __SPI5_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI5EN))
+#define __SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN))
+
+/** @brief Force or release APB2 peripheral reset.
+ */
+#define __SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST))
+#define __SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST))
+
+/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode.
+ */
+#define __SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN))
+#define __SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN))
+
+#endif /* STM32F411xE */
+/*---------------------------------------------------------------------------------------------*/
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
+ defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
+
+/** @brief Macro to configure the Timers clocks prescalers
+ * @note This feature is only available with STM32F429x/439x Devices.
+ * @param __PRESC__ : specifies the Timers clocks prescalers selection
+ * This parameter can be one of the following values:
+ * @arg RCC_TIMPRES_DESACTIVATED: The Timers kernels clocks prescaler is
+ * equal to HPRE if PPREx is corresponding to division by 1 or 2,
+ * else it is equal to [(HPRE * PPREx) / 2] if PPREx is corresponding to
+ * division by 4 or more.
+ * @arg RCC_TIMPRES_ACTIVATED: The Timers kernels clocks prescaler is
+ * equal to HPRE if PPREx is corresponding to division by 1, 2 or 4,
+ * else it is equal to [(HPRE * PPREx) / 4] if PPREx is corresponding
+ * to division by 8 or more.
+ */
+#define __HAL_RCC_TIMCLKPRESCALER(__PRESC__) (*(__IO uint32_t *) DCKCFGR_TIMPRE_BB = (__PRESC__))
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx) || STM32F401xC || STM32F401xE || STM32F411xE */
+
+#if defined(STM32F411xE)
+
+/** @brief Macro to configure the PLLI2S clock multiplication and division factors .
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note PLLI2S clock source is common with the main PLL (configured in
+ * HAL_RCC_ClockConfig() API).
+ * @param __PLLI2SM__: specifies the division factor for PLLI2S VCO input clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 63.
+ * @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input
+ * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency
+ * of 2 MHz to limit PLLI2S jitter.
+ * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock
+ * This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+ * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
+ * @param __PLLI2SR__: specifies the division factor for I2S clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+ * on the I2S clock frequency.
+ */
+#define __HAL_RCC_PLLI2S_I2SCLK_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN)) |\
+ ((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR)) | (__PLLI2SM__))
+#endif /* STM32F411xE */
+
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/** @brief Macros to Enable or Disable the PLLISAI.
+ * @note The PLLSAI is only available with STM32F429x/439x Devices.
+ * @note The PLLSAI is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLLSAI_ENABLE() (*(__IO uint32_t *) CR_PLLSAION_BB = ENABLE)
+#define __HAL_RCC_PLLSAI_DISABLE() (*(__IO uint32_t *) CR_PLLSAION_BB = DISABLE)
+
+/** @brief Macro to configure the PLLSAI clock multiplication and division factors.
+ * @note The PLLSAI is only available with STM32F429x/439x Devices.
+ * @note This function must be used only when the PLLSAI is disabled.
+ * @note PLLSAI clock source is common with the main PLL (configured in
+ * RCC_PLLConfig function )
+ * @param __PLLSAIN__: specifies the multiplication factor for PLLSAI VCO output clock.
+ * This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+ * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
+ * @param __PLLSAIQ__: specifies the division factor for SAI1 clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ * @param __PLLSAIR__: specifies the division factor for LTDC clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ */
+#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIQ__, __PLLSAIR__) (RCC->PLLSAICFGR = ((__PLLSAIN__) << 6) | ((__PLLSAIQ__) << 24) | ((__PLLSAIR__) << 28))
+
+/** @brief Macro used by the SAI HAL driver to configure the PLLI2S clock multiplication and division factors.
+ * @note This macro must be used only when the PLLI2S is disabled.
+ * @note PLLI2S clock source is common with the main PLL (configured in
+ * HAL_RCC_ClockConfig() API)
+ * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock.
+ * This parameter must be a number between Min_Data = 192 and Max_Data = 432.
+ * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO
+ * output frequency is between Min_Data = 192 and Max_Data = 432 MHz.
+ * @param __PLLI2SQ__: specifies the division factor for SAI1 clock.
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 15.
+ * @note the PLLI2SQ parameter is only available with STM32F429x/439x Devices
+ * and can be configured using the __HAL_RCC_PLLI2S_PLLSAICLK_CONFIG() macro
+ * @param __PLLI2SR__: specifies the division factor for I2S clock
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 7.
+ * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz
+ * on the I2S clock frequency.
+ */
+#define __HAL_RCC_PLLI2S_SAICLK_CONFIG(__PLLI2SN__, __PLLI2SQ__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SN__) << 6) | ((__PLLI2SQ__) << 24) | ((__PLLI2SR__) << 28))
+
+/** @brief Macro to configure the SAI clock Divider coming from PLLI2S.
+ * @note The SAI peripheral is only available with STM32F429x/439x Devices.
+ * @note This function must be called before enabling the PLLI2S.
+ * @param __PLLI2SDivQ__: specifies the PLLI2S division factor for SAI1 clock .
+ * This parameter must be a number between 1 and 32.
+ * SAI1 clock frequency = f(PLLI2SQ) / __PLLI2SDivQ__
+ */
+#define __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(__PLLI2SDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVQ, (__PLLI2SDivQ__)-1))
+
+/** @brief Macro to configure the SAI clock Divider coming from PLLSAI.
+ * @note The SAI peripheral is only available with STM32F429x/439x Devices.
+ * @note This function must be called before enabling the PLLSAI.
+ * @param __PLLSAIDivQ__: specifies the PLLSAI division factor for SAI1 clock .
+ * This parameter must be a number between Min_Data = 1 and Max_Data = 32.
+ * SAI1 clock frequency = f(PLLSAIQ) / __PLLSAIDivQ__
+ */
+#define __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(__PLLSAIDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVQ, ((__PLLSAIDivQ__)-1)<<8))
+
+/** @brief Macro to configure the LTDC clock Divider coming from PLLSAI.
+ *
+ * @note The LTDC peripheral is only available with STM32F429x/439x Devices.
+ * @note This function must be called before enabling the PLLSAI.
+ * @param __PLLSAIDivR__: specifies the PLLSAI division factor for LTDC clock .
+ * This parameter must be a number between Min_Data = 2 and Max_Data = 16.
+ * LTDC clock frequency = f(PLLSAIR) / __PLLSAIDivR__
+ */
+#define __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(__PLLSAIDivR__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVR, (__PLLSAIDivR__)))
+
+/** @brief Macro to configure SAI1BlockA clock source selection.
+ * @note The SAI peripheral is only available with STM32F429x/439x Devices.
+ * @note This function must be called before enabling PLLSAI, PLLI2S and
+ * the SAI clock.
+ * @param __SOURCE__: specifies the SAI Block A clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SAIACLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
+ * as SAI1 Block A clock.
+ * @arg RCC_SAIACLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
+ * as SAI1 Block A clock.
+ * @arg RCC_SAIACLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin
+ * used as SAI1 Block A clock.
+ */
+#define __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1ASRC, (__SOURCE__)))
+
+/** @brief Macro to configure SAI1BlockB clock source selection.
+ * @note The SAI peripheral is only available with STM32F429x/439x Devices.
+ * @note This function must be called before enabling PLLSAI, PLLI2S and
+ * the SAI clock.
+ * @param __SOURCE__: specifies the SAI Block B clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_SAIBCLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used
+ * as SAI1 Block B clock.
+ * @arg RCC_SAIBCLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used
+ * as SAI1 Block B clock.
+ * @arg RCC_SAIBCLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin
+ * used as SAI1 Block B clock.
+ */
+#define __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1BSRC, (__SOURCE__)))
+
+/** @brief Enable PLLSAI_RDY interrupt.
+ */
+#define __HAL_RCC_PLLSAI_ENABLE_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYIE))
+
+/** @brief Disable PLLSAI_RDY interrupt.
+ */
+#define __HAL_RCC_PLLSAI_DISABLE_IT() (RCC->CIR &= ~(RCC_CIR_PLLSAIRDYIE))
+
+/** @brief Clear the PLLSAI RDY interrupt pending bits.
+ */
+#define __HAL_RCC_PLLSAI_CLEAR_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYF))
+
+/** @brief Check the PLLSAI RDY interrupt has occurred or not.
+ * @retval The new state (TRUE or FALSE).
+ */
+#define __HAL_RCC_PLLSAI_GET_IT() ((RCC->CIR & (RCC_CIR_PLLSAIRDYIE)) == (RCC_CIR_PLLSAIRDYIE))
+
+/** @brief Check PLLSAI RDY flag is set or not.
+ * @retval The new state (TRUE or FALSE).
+ */
+#define __HAL_RCC_PLLSAI_GET_FLAG() ((RCC->CR & (RCC_CR_PLLSAIRDY)) == (RCC_CR_PLLSAIRDY))
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/* Exported functions --------------------------------------------------------*/
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+
+#if defined(STM32F411xE)
+void HAL_RCCEx_SelectLSEMode(uint8_t Mode);
+#endif /* STM32F411xE */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_RCC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_rng.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,222 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rng.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of RNG HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RNG_H
+#define __STM32F4xx_HAL_RNG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+ defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RNG
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief RNG HAL State Structure definition
+ */
+typedef enum
+{
+ HAL_RNG_STATE_RESET = 0x00, /*!< RNG not yet initialized or disabled */
+ HAL_RNG_STATE_READY = 0x01, /*!< RNG initialized and ready for use */
+ HAL_RNG_STATE_BUSY = 0x02, /*!< RNG internal process is ongoing */
+ HAL_RNG_STATE_TIMEOUT = 0x03, /*!< RNG timeout state */
+ HAL_RNG_STATE_ERROR = 0x04 /*!< RNG error state */
+
+}HAL_RNG_StateTypeDef;
+
+/**
+ * @brief RNG Handle Structure definition
+ */
+typedef struct
+{
+ RNG_TypeDef *Instance; /*!< Register base address */
+
+ HAL_LockTypeDef Lock; /*!< RNG locking object */
+
+ __IO HAL_RNG_StateTypeDef State; /*!< RNG communication state */
+
+}RNG_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup RNG_Exported_Constants
+ * @{
+ */
+
+/** @defgroup RNG_Interrupt_definition
+ * @{
+ */
+#define RNG_IT_CEI ((uint32_t)0x20) /*!< Clock error interrupt */
+#define RNG_IT_SEI ((uint32_t)0x40) /*!< Seed error interrupt */
+
+#define IS_RNG_IT(IT) (((IT) == RNG_IT_CEI) || \
+ ((IT) == RNG_IT_SEI))
+/**
+ * @}
+ */
+
+
+/** @defgroup RNG_Flag_definition
+ * @{
+ */
+#define RNG_FLAG_DRDY ((uint32_t)0x0001) /*!< Data ready */
+#define RNG_FLAG_CECS ((uint32_t)0x0002) /*!< Clock error current status */
+#define RNG_FLAG_SECS ((uint32_t)0x0004) /*!< Seed error current status */
+
+#define IS_RNG_FLAG(FLAG) (((FLAG) == RNG_FLAG_DRDY) || \
+ ((FLAG) == RNG_FLAG_CECS) || \
+ ((FLAG) == RNG_FLAG_SECS))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset RNG handle state
+ * @param __HANDLE__: RNG Handle
+ * @retval None
+ */
+#define __HAL_RNG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RNG_STATE_RESET)
+
+/**
+ * @brief Enables the RNG peripheral.
+ * @param __HANDLE__: RNG Handle
+ * @retval None
+ */
+#define __HAL_RNG_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_RNGEN)
+
+/**
+ * @brief Disables the RNG peripheral.
+ * @param __HANDLE__: RNG Handle
+ * @retval None
+ */
+#define __HAL_RNG_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_RNGEN)
+
+/**
+ * @brief Gets the selected RNG's flag status.
+ * @param __HANDLE__: RNG Handle
+ * @param __FLAG__: RNG flag
+ * @retval The new state of RNG_FLAG (SET or RESET).
+ */
+#define __HAL_RNG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clears the RNG's pending flags.
+ * @param __HANDLE__: RNG Handle
+ * @param __FLAG__: RNG flag
+ * @retval None
+ */
+#define __HAL_RNG_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__))
+
+/**
+ * @brief Enables the RNG interrupts.
+ * @param __HANDLE__: RNG Handle
+ * @retval None
+ */
+#define __HAL_RNG_ENABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_IE)
+
+/**
+ * @brief Disables the RNG interrupts.
+ * @param __HANDLE__: RNG Handle
+ * @retval None
+ */
+#define __HAL_RNG_DISABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_IE)
+
+/**
+ * @brief Checks whether the specified RNG interrupt has occurred or not.
+ * @param __HANDLE__: RNG Handle
+ * @param __INTERRUPT__: specifies the RNG interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg RNG_FLAG_DRDY: Data ready interrupt
+ * @arg RNG_FLAG_CECS: Clock error interrupt
+ * @arg RNG_FLAG_SECS: Seed error interrupt
+ * @retval The new state of RNG_FLAG (SET or RESET).
+ */
+#define __HAL_RNG_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng);
+HAL_StatusTypeDef HAL_RNG_DeInit (RNG_HandleTypeDef *hrng);
+void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng);
+void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng);
+
+/* Peripheral Control functions ************************************************/
+uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef *hrng);
+uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef *hrng);
+void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng);
+void HAL_RNG_ReadyCallback(RNG_HandleTypeDef* hrng);
+void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng);
+
+/* Peripheral State functions **************************************************/
+HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng);
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_RNG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_rtc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,766 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rtc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of RTC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RTC_H
+#define __STM32F4xx_HAL_RTC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RTC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_RTC_STATE_RESET = 0x00, /*!< RTC not yet initialized or disabled */
+ HAL_RTC_STATE_READY = 0x01, /*!< RTC initialized and ready for use */
+ HAL_RTC_STATE_BUSY = 0x02, /*!< RTC process is ongoing */
+ HAL_RTC_STATE_TIMEOUT = 0x03, /*!< RTC timeout state */
+ HAL_RTC_STATE_ERROR = 0x04 /*!< RTC error state */
+
+}HAL_RTCStateTypeDef;
+
+/**
+ * @brief RTC Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t HourFormat; /*!< Specifies the RTC Hour Format.
+ This parameter can be a value of @ref RTC_Hour_Formats */
+
+ uint32_t AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */
+
+ uint32_t SynchPrediv; /*!< Specifies the RTC Synchronous Predivider value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF */
+
+ uint32_t OutPut; /*!< Specifies which signal will be routed to the RTC output.
+ This parameter can be a value of @ref RTC_Output_selection_Definitions */
+
+ uint32_t OutPutPolarity; /*!< Specifies the polarity of the output signal.
+ This parameter can be a value of @ref RTC_Output_Polarity_Definitions */
+
+ uint32_t OutPutType; /*!< Specifies the RTC Output Pin mode.
+ This parameter can be a value of @ref RTC_Output_Type_ALARM_OUT */
+}RTC_InitTypeDef;
+
+/**
+ * @brief RTC Time structure definition
+ */
+typedef struct
+{
+ uint8_t Hours; /*!< Specifies the RTC Time Hour.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the RTC_HourFormat_12 is selected.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the RTC_HourFormat_24 is selected */
+
+ uint8_t Minutes; /*!< Specifies the RTC Time Minutes.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+ uint8_t Seconds; /*!< Specifies the RTC Time Seconds.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+ uint32_t SubSeconds; /*!< Specifies the RTC Time SubSeconds.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+ uint8_t TimeFormat; /*!< Specifies the RTC AM/PM Time.
+ This parameter can be a value of @ref RTC_AM_PM_Definitions */
+
+ uint32_t DayLightSaving; /*!< Specifies DayLight Save Operation.
+ This parameter can be a value of @ref RTC_DayLightSaving_Definitions */
+
+ uint32_t StoreOperation; /*!< Specifies RTC_StoreOperation value to be written in the BCK bit
+ in CR register to store the operation.
+ This parameter can be a value of @ref RTC_StoreOperation_Definitions */
+}RTC_TimeTypeDef;
+
+/**
+ * @brief RTC Date structure definition
+ */
+typedef struct
+{
+ uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay.
+ This parameter can be a value of @ref RTC_WeekDay_Definitions */
+
+ uint8_t Month; /*!< Specifies the RTC Date Month (in BCD format).
+ This parameter can be a value of @ref RTC_Month_Date_Definitions */
+
+ uint8_t Date; /*!< Specifies the RTC Date.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 31 */
+
+ uint8_t Year; /*!< Specifies the RTC Date Year.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 99 */
+
+}RTC_DateTypeDef;
+
+/**
+ * @brief RTC Alarm structure definition
+ */
+typedef struct
+{
+ RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members */
+
+ uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks.
+ This parameter can be a value of @ref RTC_AlarmMask_Definitions */
+
+ uint32_t AlarmSubSecondMask; /*!< Specifies the RTC Alarm SubSeconds Masks.
+ This parameter can be a value of @ref RTC_Alarm_Sub_Seconds_Masks_Definitions */
+
+ uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on Date or WeekDay.
+ This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */
+
+ uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Date/WeekDay.
+ If the Alarm Date is selected, this parameter must be set to a value in the 1-31 range.
+ If the Alarm WeekDay is selected, this parameter can be a value of @ref RTC_WeekDay_Definitions */
+
+ uint32_t Alarm; /*!< Specifies the alarm .
+ This parameter can be a value of @ref RTC_Alarms_Definitions */
+}RTC_AlarmTypeDef;
+
+/**
+ * @brief Time Handle Structure definition
+ */
+typedef struct
+{
+ RTC_TypeDef *Instance; /*!< Register base address */
+
+ RTC_InitTypeDef Init; /*!< RTC required parameters */
+
+ HAL_LockTypeDef Lock; /*!< RTC locking object */
+
+ __IO HAL_RTCStateTypeDef State; /*!< Time communication state */
+
+}RTC_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RTC_Exported_Constants
+ * @{
+ */
+
+/* Masks Definition */
+#define RTC_TR_RESERVED_MASK ((uint32_t)0x007F7F7F)
+#define RTC_DR_RESERVED_MASK ((uint32_t)0x00FFFF3F)
+#define RTC_INIT_MASK ((uint32_t)0xFFFFFFFF)
+#define RTC_RSF_MASK ((uint32_t)0xFFFFFF5F)
+#define RTC_FLAGS_MASK ((uint32_t)(RTC_FLAG_TSOVF | RTC_FLAG_TSF | RTC_FLAG_WUTF | \
+ RTC_FLAG_ALRBF | RTC_FLAG_ALRAF | RTC_FLAG_INITF | \
+ RTC_FLAG_RSF | RTC_FLAG_INITS | RTC_FLAG_WUTWF | \
+ RTC_FLAG_ALRBWF | RTC_FLAG_ALRAWF | RTC_FLAG_TAMP1F | \
+ RTC_FLAG_RECALPF | RTC_FLAG_SHPF))
+
+#define RTC_TIMEOUT_VALUE 1000
+
+/** @defgroup RTC_Hour_Formats
+ * @{
+ */
+#define RTC_HOURFORMAT_24 ((uint32_t)0x00000000)
+#define RTC_HOURFORMAT_12 ((uint32_t)0x00000040)
+
+#define IS_RTC_HOUR_FORMAT(FORMAT) (((FORMAT) == RTC_HOURFORMAT_12) || \
+ ((FORMAT) == RTC_HOURFORMAT_24))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Output_selection_Definitions
+ * @{
+ */
+#define RTC_OUTPUT_DISABLE ((uint32_t)0x00000000)
+#define RTC_OUTPUT_ALARMA ((uint32_t)0x00200000)
+#define RTC_OUTPUT_ALARMB ((uint32_t)0x00400000)
+#define RTC_OUTPUT_WAKEUP ((uint32_t)0x00600000)
+
+#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \
+ ((OUTPUT) == RTC_OUTPUT_ALARMA) || \
+ ((OUTPUT) == RTC_OUTPUT_ALARMB) || \
+ ((OUTPUT) == RTC_OUTPUT_WAKEUP))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Output_Polarity_Definitions
+ * @{
+ */
+#define RTC_OUTPUT_POLARITY_HIGH ((uint32_t)0x00000000)
+#define RTC_OUTPUT_POLARITY_LOW ((uint32_t)0x00100000)
+
+#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OUTPUT_POLARITY_HIGH) || \
+ ((POL) == RTC_OUTPUT_POLARITY_LOW))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Output_Type_ALARM_OUT
+ * @{
+ */
+#define RTC_OUTPUT_TYPE_OPENDRAIN ((uint32_t)0x00000000)
+#define RTC_OUTPUT_TYPE_PUSHPULL ((uint32_t)0x00040000)
+
+#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OUTPUT_TYPE_OPENDRAIN) || \
+ ((TYPE) == RTC_OUTPUT_TYPE_PUSHPULL))
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Asynchronous_Predivider
+ * @{
+ */
+#define IS_RTC_ASYNCH_PREDIV(PREDIV) ((PREDIV) <= (uint32_t)0x7F)
+/**
+ * @}
+ */
+
+
+/** @defgroup RTC_Synchronous_Predivider
+ * @{
+ */
+#define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= (uint32_t)0x7FFF)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Time_Definitions
+ * @{
+ */
+#define IS_RTC_HOUR12(HOUR) (((HOUR) > (uint32_t)0) && ((HOUR) <= (uint32_t)12))
+#define IS_RTC_HOUR24(HOUR) ((HOUR) <= (uint32_t)23)
+#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= (uint32_t)59)
+#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= (uint32_t)59)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_AM_PM_Definitions
+ * @{
+ */
+#define RTC_HOURFORMAT12_AM ((uint8_t)0x00)
+#define RTC_HOURFORMAT12_PM ((uint8_t)0x40)
+
+#define IS_RTC_HOURFORMAT12(PM) (((PM) == RTC_HOURFORMAT12_AM) || ((PM) == RTC_HOURFORMAT12_PM))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_DayLightSaving_Definitions
+ * @{
+ */
+#define RTC_DAYLIGHTSAVING_SUB1H ((uint32_t)0x00020000)
+#define RTC_DAYLIGHTSAVING_ADD1H ((uint32_t)0x00010000)
+#define RTC_DAYLIGHTSAVING_NONE ((uint32_t)0x00000000)
+
+#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DAYLIGHTSAVING_SUB1H) || \
+ ((SAVE) == RTC_DAYLIGHTSAVING_ADD1H) || \
+ ((SAVE) == RTC_DAYLIGHTSAVING_NONE))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_StoreOperation_Definitions
+ * @{
+ */
+#define RTC_STOREOPERATION_RESET ((uint32_t)0x00000000)
+#define RTC_STOREOPERATION_SET ((uint32_t)0x00040000)
+
+#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_STOREOPERATION_RESET) || \
+ ((OPERATION) == RTC_STOREOPERATION_SET))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Input_parameter_format_definitions
+ * @{
+ */
+#define FORMAT_BIN ((uint32_t)0x000000000)
+#define FORMAT_BCD ((uint32_t)0x000000001)
+
+#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == FORMAT_BIN) || ((FORMAT) == FORMAT_BCD))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Year_Date_Definitions
+ * @{
+ */
+#define IS_RTC_YEAR(YEAR) ((YEAR) <= (uint32_t)99)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Month_Date_Definitions
+ * @{
+ */
+
+/* Coded in BCD format */
+#define RTC_MONTH_JANUARY ((uint8_t)0x01)
+#define RTC_MONTH_FEBRUARY ((uint8_t)0x02)
+#define RTC_MONTH_MARCH ((uint8_t)0x03)
+#define RTC_MONTH_APRIL ((uint8_t)0x04)
+#define RTC_MONTH_MAY ((uint8_t)0x05)
+#define RTC_MONTH_JUNE ((uint8_t)0x06)
+#define RTC_MONTH_JULY ((uint8_t)0x07)
+#define RTC_MONTH_AUGUST ((uint8_t)0x08)
+#define RTC_MONTH_SEPTEMBER ((uint8_t)0x09)
+#define RTC_MONTH_OCTOBER ((uint8_t)0x10)
+#define RTC_MONTH_NOVEMBER ((uint8_t)0x11)
+#define RTC_MONTH_DECEMBER ((uint8_t)0x12)
+
+#define IS_RTC_MONTH(MONTH) (((MONTH) >= (uint32_t)1) && ((MONTH) <= (uint32_t)12))
+#define IS_RTC_DATE(DATE) (((DATE) >= (uint32_t)1) && ((DATE) <= (uint32_t)31))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_WeekDay_Definitions
+ * @{
+ */
+#define RTC_WEEKDAY_MONDAY ((uint8_t)0x01)
+#define RTC_WEEKDAY_TUESDAY ((uint8_t)0x02)
+#define RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03)
+#define RTC_WEEKDAY_THURSDAY ((uint8_t)0x04)
+#define RTC_WEEKDAY_FRIDAY ((uint8_t)0x05)
+#define RTC_WEEKDAY_SATURDAY ((uint8_t)0x06)
+#define RTC_WEEKDAY_SUNDAY ((uint8_t)0x07)
+
+#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Alarm_Definitions
+ * @{
+ */
+#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) >(uint32_t) 0) && ((DATE) <= (uint32_t)31))
+#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
+/**
+ * @}
+ */
+
+
+/** @defgroup RTC_AlarmDateWeekDay_Definitions
+ * @{
+ */
+#define RTC_ALARMDATEWEEKDAYSEL_DATE ((uint32_t)0x00000000)
+#define RTC_ALARMDATEWEEKDAYSEL_WEEKDAY ((uint32_t)0x40000000)
+
+#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_ALARMDATEWEEKDAYSEL_DATE) || \
+ ((SEL) == RTC_ALARMDATEWEEKDAYSEL_WEEKDAY))
+/**
+ * @}
+ */
+
+
+/** @defgroup RTC_AlarmMask_Definitions
+ * @{
+ */
+#define RTC_ALARMMASK_NONE ((uint32_t)0x00000000)
+#define RTC_ALARMMASK_DATEWEEKDAY RTC_ALRMAR_MSK4
+#define RTC_ALARMMASK_HOURS RTC_ALRMAR_MSK3
+#define RTC_ALARMMASK_MINUTES RTC_ALRMAR_MSK2
+#define RTC_ALARMMASK_SECONDS RTC_ALRMAR_MSK1
+#define RTC_ALARMMASK_ALL ((uint32_t)0x80808080)
+
+#define IS_ALARM_MASK(MASK) (((MASK) & 0x7F7F7F7F) == (uint32_t)RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Alarms_Definitions
+ * @{
+ */
+#define RTC_ALARM_A RTC_CR_ALRAE
+#define RTC_ALARM_B RTC_CR_ALRBE
+
+#define IS_ALARM(ALARM) (((ALARM) == RTC_ALARM_A) || ((ALARM) == RTC_ALARM_B))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Alarm_Sub_Seconds_Value
+ * @{
+ */
+#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= (uint32_t)0x00007FFF)
+/**
+ * @}
+ */
+
+ /** @defgroup RTC_Alarm_Sub_Seconds_Masks_Definitions
+ * @{
+ */
+#define RTC_ALARMSUBSECONDMASK_ALL ((uint32_t)0x00000000) /*!< All Alarm SS fields are masked.
+ There is no comparison on sub seconds
+ for Alarm */
+#define RTC_ALARMSUBSECONDMASK_SS14_1 ((uint32_t)0x01000000) /*!< SS[14:1] are don't care in Alarm
+ comparison. Only SS[0] is compared. */
+#define RTC_ALARMSUBSECONDMASK_SS14_2 ((uint32_t)0x02000000) /*!< SS[14:2] are don't care in Alarm
+ comparison. Only SS[1:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_3 ((uint32_t)0x03000000) /*!< SS[14:3] are don't care in Alarm
+ comparison. Only SS[2:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_4 ((uint32_t)0x04000000) /*!< SS[14:4] are don't care in Alarm
+ comparison. Only SS[3:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_5 ((uint32_t)0x05000000) /*!< SS[14:5] are don't care in Alarm
+ comparison. Only SS[4:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_6 ((uint32_t)0x06000000) /*!< SS[14:6] are don't care in Alarm
+ comparison. Only SS[5:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_7 ((uint32_t)0x07000000) /*!< SS[14:7] are don't care in Alarm
+ comparison. Only SS[6:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_8 ((uint32_t)0x08000000) /*!< SS[14:8] are don't care in Alarm
+ comparison. Only SS[7:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_9 ((uint32_t)0x09000000) /*!< SS[14:9] are don't care in Alarm
+ comparison. Only SS[8:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_10 ((uint32_t)0x0A000000) /*!< SS[14:10] are don't care in Alarm
+ comparison. Only SS[9:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_11 ((uint32_t)0x0B000000) /*!< SS[14:11] are don't care in Alarm
+ comparison. Only SS[10:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_12 ((uint32_t)0x0C000000) /*!< SS[14:12] are don't care in Alarm
+ comparison.Only SS[11:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_13 ((uint32_t)0x0D000000) /*!< SS[14:13] are don't care in Alarm
+ comparison. Only SS[12:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14 ((uint32_t)0x0E000000) /*!< SS[14] is don't care in Alarm
+ comparison.Only SS[13:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_None ((uint32_t)0x0F000000) /*!< SS[14:0] are compared and must match
+ to activate alarm. */
+
+#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK) (((MASK) == RTC_ALARMSUBSECONDMASK_ALL) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_1) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_2) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_3) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_4) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_5) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_6) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_7) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_8) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_9) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_10) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_11) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_12) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_13) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_None))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Interrupts_Definitions
+ * @{
+ */
+#define RTC_IT_TS ((uint32_t)0x00008000)
+#define RTC_IT_WUT ((uint32_t)0x00004000)
+#define RTC_IT_ALRB ((uint32_t)0x00002000)
+#define RTC_IT_ALRA ((uint32_t)0x00001000)
+#define RTC_IT_TAMP ((uint32_t)0x00000004) /* Used only to Enable the Tamper Interrupt */
+#define RTC_IT_TAMP1 ((uint32_t)0x00020000)
+#define RTC_IT_TAMP2 ((uint32_t)0x00040000)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Flags_Definitions
+ * @{
+ */
+#define RTC_FLAG_RECALPF ((uint32_t)0x00010000)
+#define RTC_FLAG_TAMP2F ((uint32_t)0x00004000)
+#define RTC_FLAG_TAMP1F ((uint32_t)0x00002000)
+#define RTC_FLAG_TSOVF ((uint32_t)0x00001000)
+#define RTC_FLAG_TSF ((uint32_t)0x00000800)
+#define RTC_FLAG_WUTF ((uint32_t)0x00000400)
+#define RTC_FLAG_ALRBF ((uint32_t)0x00000200)
+#define RTC_FLAG_ALRAF ((uint32_t)0x00000100)
+#define RTC_FLAG_INITF ((uint32_t)0x00000040)
+#define RTC_FLAG_RSF ((uint32_t)0x00000020)
+#define RTC_FLAG_INITS ((uint32_t)0x00000010)
+#define RTC_FLAG_SHPF ((uint32_t)0x00000008)
+#define RTC_FLAG_WUTWF ((uint32_t)0x00000004)
+#define RTC_FLAG_ALRBWF ((uint32_t)0x00000002)
+#define RTC_FLAG_ALRAWF ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset RTC handle state
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET)
+
+/**
+ * @brief Disable the write protection for RTC registers.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Instance->WPR = 0xCA; \
+ (__HANDLE__)->Instance->WPR = 0x53; \
+ } while(0)
+
+/**
+ * @brief Enable the write protection for RTC registers.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Instance->WPR = 0xFF; \
+ } while(0)
+
+/**
+ * @brief Enable the RTC ALARMA peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRAE))
+
+/**
+ * @brief Disable the RTC ALARMA peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRAE))
+
+/**
+ * @brief Enable the RTC ALARMB peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRBE))
+
+/**
+ * @brief Disable the RTC ALARMB peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRBE))
+
+/**
+ * @brief Enable the RTC Alarm interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @arg RTC_IT_ALRB: Alarm B interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC Alarm interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @arg RTC_IT_ALRB: Alarm B interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified RTC Alarm interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @arg RTC_IT_ALRB: Alarm B interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __FLAG__) ((((((__HANDLE__)->Instance->ISR)& ((__FLAG__)>> 4)) & 0x0000FFFF) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC Alarm's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_ALRAF
+ * @arg RTC_FLAG_ALRBF
+ * @arg RTC_FLAG_ALRAWF
+ * @arg RTC_FLAG_ALRBWF
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Alarm's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_ALRAF
+ * @arg RTC_FLAG_ALRBF
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+
+#define RTC_EXTI_LINE_ALARM_EVENT ((uint32_t)0x00020000) /*!< External interrupt line 17 Connected to the RTC Alarm event */
+#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)0x00200000) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */
+#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to the RTC Wakeup event */
+
+/**
+ * @brief Enable the RTC Exti line.
+ * @param __EXTILINE__: specifies the RTC Exti sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_EXTI_LINE_ALARM_EVENT
+ * @arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
+ * @arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
+ * @retval None
+ */
+#define __HAL_RTC_EXTI_ENABLE_IT(__EXTILINE__) (EXTI->IMR |= (__EXTILINE__))
+
+/* alias define maintained for legacy */
+#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT
+
+/**
+ * @brief Disable the RTC Exti line.
+ * @param __EXTILINE__: specifies the RTC Exti sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_EXTI_LINE_ALARM_EVENT
+ * @arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
+ * @arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
+ * @retval None
+ */
+#define __HAL_RTC_EXTI_DISABLE_IT(__EXTILINE__) (EXTI->IMR &= ~(__EXTILINE__))
+
+/* alias define maintained for legacy */
+#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT
+
+/**
+ * @brief Generates a Software interrupt on selected EXTI line.
+ * @param __EXTILINE__: specifies the RTC Exti sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_EXTI_LINE_ALARM_EVENT
+ * @arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
+ * @arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
+ * @retval None
+ */
+#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+
+/**
+ * @brief Clear the RTC Exti flags.
+ * @param __FLAG__: specifies the RTC Exti sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_EXTI_LINE_ALARM_EVENT
+ * @arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
+ * @arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
+ * @retval None
+ */
+#define __HAL_RTC_EXTI_CLEAR_FLAG(__FLAG__) (EXTI->PR = (__FLAG__))
+
+/* alias define maintained for legacy */
+#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG
+
+
+/* Include RTC HAL Extension module */
+#include "stm32f4xx_hal_rtc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc);
+
+/* RTC Time and Date functions ************************************************/
+HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+
+/* RTC Alarm functions ********************************************************/
+HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm);
+HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format);
+void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc);
+
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc);
+
+/* Peripheral State functions *************************************************/
+HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc);
+
+HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef* hrtc);
+uint8_t RTC_ByteToBcd2(uint8_t Value);
+uint8_t RTC_Bcd2ToByte(uint8_t Value);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_RTC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_rtc_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,691 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_rtc_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of RTC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_RTC_EX_H
+#define __STM32F4xx_HAL_RTC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RTCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief RTC Tamper structure definition
+ */
+typedef struct
+{
+ uint32_t Tamper; /*!< Specifies the Tamper Pin.
+ This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */
+
+ uint32_t PinSelection; /*!< Specifies the Tamper Pin.
+ This parameter can be a value of @ref RTCEx_Tamper_Pins_Selection */
+
+ uint32_t Trigger; /*!< Specifies the Tamper Trigger.
+ This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */
+
+ uint32_t Filter; /*!< Specifies the RTC Filter Tamper.
+ This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */
+
+ uint32_t SamplingFrequency; /*!< Specifies the sampling frequency.
+ This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */
+
+ uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration .
+ This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */
+
+ uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp .
+ This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */
+
+ uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection.
+ This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */
+}RTC_TamperTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Constants
+ * @{
+ */
+
+/** @defgroup RTCEx_Backup_Registers_Definitions
+ * @{
+ */
+#define RTC_BKP_DR0 ((uint32_t)0x00000000)
+#define RTC_BKP_DR1 ((uint32_t)0x00000001)
+#define RTC_BKP_DR2 ((uint32_t)0x00000002)
+#define RTC_BKP_DR3 ((uint32_t)0x00000003)
+#define RTC_BKP_DR4 ((uint32_t)0x00000004)
+#define RTC_BKP_DR5 ((uint32_t)0x00000005)
+#define RTC_BKP_DR6 ((uint32_t)0x00000006)
+#define RTC_BKP_DR7 ((uint32_t)0x00000007)
+#define RTC_BKP_DR8 ((uint32_t)0x00000008)
+#define RTC_BKP_DR9 ((uint32_t)0x00000009)
+#define RTC_BKP_DR10 ((uint32_t)0x0000000A)
+#define RTC_BKP_DR11 ((uint32_t)0x0000000B)
+#define RTC_BKP_DR12 ((uint32_t)0x0000000C)
+#define RTC_BKP_DR13 ((uint32_t)0x0000000D)
+#define RTC_BKP_DR14 ((uint32_t)0x0000000E)
+#define RTC_BKP_DR15 ((uint32_t)0x0000000F)
+#define RTC_BKP_DR16 ((uint32_t)0x00000010)
+#define RTC_BKP_DR17 ((uint32_t)0x00000011)
+#define RTC_BKP_DR18 ((uint32_t)0x00000012)
+#define RTC_BKP_DR19 ((uint32_t)0x00000013)
+
+#define IS_RTC_BKP(BKP) (((BKP) == RTC_BKP_DR0) || \
+ ((BKP) == RTC_BKP_DR1) || \
+ ((BKP) == RTC_BKP_DR2) || \
+ ((BKP) == RTC_BKP_DR3) || \
+ ((BKP) == RTC_BKP_DR4) || \
+ ((BKP) == RTC_BKP_DR5) || \
+ ((BKP) == RTC_BKP_DR6) || \
+ ((BKP) == RTC_BKP_DR7) || \
+ ((BKP) == RTC_BKP_DR8) || \
+ ((BKP) == RTC_BKP_DR9) || \
+ ((BKP) == RTC_BKP_DR10) || \
+ ((BKP) == RTC_BKP_DR11) || \
+ ((BKP) == RTC_BKP_DR12) || \
+ ((BKP) == RTC_BKP_DR13) || \
+ ((BKP) == RTC_BKP_DR14) || \
+ ((BKP) == RTC_BKP_DR15) || \
+ ((BKP) == RTC_BKP_DR16) || \
+ ((BKP) == RTC_BKP_DR17) || \
+ ((BKP) == RTC_BKP_DR18) || \
+ ((BKP) == RTC_BKP_DR19))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Time_Stamp_Edges_definitions
+ * @{
+ */
+#define RTC_TIMESTAMPEDGE_RISING ((uint32_t)0x00000000)
+#define RTC_TIMESTAMPEDGE_FALLING ((uint32_t)0x00000008)
+
+#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \
+ ((EDGE) == RTC_TIMESTAMPEDGE_FALLING))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pins_Definitions
+ * @{
+ */
+#define RTC_TAMPER_1 RTC_TAFCR_TAMP1E
+#define RTC_TAMPER_2 RTC_TAFCR_TAMP2E
+
+#define IS_TAMPER(TAMPER) ((((TAMPER) & (uint32_t)0xFFFFFFF6) == 0x00) && ((TAMPER) != (uint32_t)RESET))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pins_Selection
+ * @{
+ */
+#define RTC_TAMPERPIN_PC13 ((uint32_t)0x00000000)
+#define RTC_TAMPERPIN_PI8 ((uint32_t)0x00010000)
+
+#define IS_RTC_TAMPER_PIN(PIN) (((PIN) == RTC_TAMPERPIN_PC13) || \
+ ((PIN) == RTC_TAMPERPIN_PI8))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_TimeStamp_Pin_Selection
+ * @{
+ */
+#define RTC_TIMESTAMPPIN_PC13 ((uint32_t)0x00000000)
+#define RTC_TIMESTAMPPIN_PI8 ((uint32_t)0x00020000)
+
+#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_PC13) || \
+ ((PIN) == RTC_TIMESTAMPPIN_PI8))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Trigger_Definitions
+ * @{
+ */
+#define RTC_TAMPERTRIGGER_RISINGEDGE ((uint32_t)0x00000000)
+#define RTC_TAMPERTRIGGER_FALLINGEDGE ((uint32_t)0x00000002)
+#define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE
+#define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE
+
+#define IS_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL))
+
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Filter_Definitions
+ * @{
+ */
+#define RTC_TAMPERFILTER_DISABLE ((uint32_t)0x00000000) /*!< Tamper filter is disabled */
+
+#define RTC_TAMPERFILTER_2SAMPLE ((uint32_t)0x00000800) /*!< Tamper is activated after 2
+ consecutive samples at the active level */
+#define RTC_TAMPERFILTER_4SAMPLE ((uint32_t)0x00001000) /*!< Tamper is activated after 4
+ consecutive samples at the active level */
+#define RTC_TAMPERFILTER_8SAMPLE ((uint32_t)0x00001800) /*!< Tamper is activated after 8
+ consecutive samples at the active leve. */
+
+#define IS_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_8SAMPLE))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions
+ * @{
+ */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 ((uint32_t)0x00000000) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 32768 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 ((uint32_t)0x00000100) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 16384 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 ((uint32_t)0x00000200) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 8192 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 ((uint32_t)0x00000300) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 4096 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 ((uint32_t)0x00000400) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 2048 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 ((uint32_t)0x00000500) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 1024 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 ((uint32_t)0x00000600) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 512 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 ((uint32_t)0x00000700) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 256 */
+
+#define IS_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions
+ * @{
+ */
+#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK ((uint32_t)0x00000000) /*!< Tamper pins are pre-charged before
+ sampling during 1 RTCCLK cycle */
+#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK ((uint32_t)0x00002000) /*!< Tamper pins are pre-charged before
+ sampling during 2 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK ((uint32_t)0x00004000) /*!< Tamper pins are pre-charged before
+ sampling during 4 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK ((uint32_t)0x00006000) /*!< Tamper pins are pre-charged before
+ sampling during 8 RTCCLK cycles */
+
+#define IS_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions
+ * @{
+ */
+#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE ((uint32_t)RTC_TAFCR_TAMPTS) /*!< TimeStamp on Tamper Detection event saved */
+#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event is not saved */
+
+#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \
+ ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pull_UP_Definitions
+ * @{
+ */
+#define RTC_TAMPER_PULLUP_ENABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event saved */
+#define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAFCR_TAMPPUDIS) /*!< TimeStamp on Tamper Detection event is not saved */
+
+#define IS_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \
+ ((STATE) == RTC_TAMPER_PULLUP_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Wakeup_Timer_Definitions
+ * @{
+ */
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 ((uint32_t)0x00000000)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 ((uint32_t)0x00000001)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 ((uint32_t)0x00000002)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 ((uint32_t)0x00000003)
+#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS ((uint32_t)0x00000004)
+#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS ((uint32_t)0x00000006)
+
+#define IS_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))
+
+#define IS_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFF)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Digital_Calibration_Definitions
+ * @{
+ */
+#define RTC_CALIBSIGN_POSITIVE ((uint32_t)0x00000000)
+#define RTC_CALIBSIGN_NEGATIVE ((uint32_t)0x00000080)
+
+#define IS_RTC_CALIB_SIGN(SIGN) (((SIGN) == RTC_CALIBSIGN_POSITIVE) || \
+ ((SIGN) == RTC_CALIBSIGN_NEGATIVE))
+
+#define IS_RTC_CALIB_VALUE(VALUE) ((VALUE) < 0x20)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Smooth_calib_period_Definitions
+ * @{
+ */
+#define RTC_SMOOTHCALIB_PERIOD_32SEC ((uint32_t)0x00000000) /*!< If RTCCLK = 32768 Hz, Smooth calibation
+ period is 32s, else 2exp20 RTCCLK seconds */
+#define RTC_SMOOTHCALIB_PERIOD_16SEC ((uint32_t)0x00002000) /*!< If RTCCLK = 32768 Hz, Smooth calibation
+ period is 16s, else 2exp19 RTCCLK seconds */
+#define RTC_SMOOTHCALIB_PERIOD_8SEC ((uint32_t)0x00004000) /*!< If RTCCLK = 32768 Hz, Smooth calibation
+ period is 8s, else 2exp18 RTCCLK seconds */
+
+#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \
+ ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \
+ ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions
+ * @{
+ */
+#define RTC_SMOOTHCALIB_PLUSPULSES_SET ((uint32_t)0x00008000) /*!< The number of RTCCLK pulses added
+ during a X -second window = Y - CALM[8:0]
+ with Y = 512, 256, 128 when X = 32, 16, 8 */
+#define RTC_SMOOTHCALIB_PLUSPULSES_RESET ((uint32_t)0x00000000) /*!< The number of RTCCLK pulses subbstited
+ during a 32-second window = CALM[8:0] */
+
+#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \
+ ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Smooth_calib_Minus_pulses_Definitions
+ * @{
+ */
+#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FF)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Add_1_Second_Parameter_Definitions
+ * @{
+ */
+#define RTC_SHIFTADD1S_RESET ((uint32_t)0x00000000)
+#define RTC_SHIFTADD1S_SET ((uint32_t)0x80000000)
+
+#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \
+ ((SEL) == RTC_SHIFTADD1S_SET))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Substract_Fraction_Of_Second_Value
+ * @{
+ */
+#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFF)
+/**
+ * @}
+ */
+
+ /** @defgroup RTCEx_Calib_Output_selection_Definitions
+ * @{
+ */
+#define RTC_CALIBOUTPUT_512HZ ((uint32_t)0x00000000)
+#define RTC_CALIBOUTPUT_1HZ ((uint32_t)0x00080000)
+
+#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \
+ ((OUTPUT) == RTC_CALIBOUTPUT_1HZ))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/**
+ * @brief Enable the RTC WakeUp Timer peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
+
+/**
+ * @brief Enable the RTC TimeStamp peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
+
+/**
+ * @brief Disable the RTC WakeUp Timer peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
+
+/**
+ * @brief Disable the RTC TimeStamp peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
+
+/**
+ * @brief Enable the Coarse calibration process.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_COARSE_CALIB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_DCE))
+
+/**
+ * @brief Disable the Coarse calibration process.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_COARSE_CALIB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_DCE))
+
+/**
+ * @brief Enable the RTC calibration output.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))
+
+/**
+ * @brief Disable the calibration output.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
+
+/**
+ * @brief Enable the clock reference detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))
+
+/**
+ * @brief Disable the clock reference detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
+
+/**
+ * @brief Enable the RTC TimeStamp interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Enable the RTC WakeUpTimer interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC TimeStamp interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC WakeUpTimer interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified RTC Tamper interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TAMP1
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
+
+/**
+ * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
+
+/**
+ * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC TimeStamp's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC TimeStamp Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TSF
+ * @arg RTC_FLAG_TSOVF
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC WakeUpTimer's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC WakeUpTimer Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_WUTF
+ * @arg RTC_FLAG_WUTWF
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC Tamper's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC shift operation's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC shift operation Flag is pending or not.
+ * This parameter can be:
+ * @arg RTC_FLAG_SHPF
+ * @retval None
+ */
+#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Time Stamp's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TSF
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+ * @brief Clear the RTC Tamper's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+ * @brief Clear the RTC Wake Up timer's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_WUTF
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/* Exported functions --------------------------------------------------------*/
+
+/* RTC TimeStamp and Tamper functions *****************************************/
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format);
+
+HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
+HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
+void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);
+
+void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+
+/* RTC Wake-up functions ******************************************************/
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
+uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+
+/* Extension Control functions ************************************************/
+void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
+uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
+
+HAL_StatusTypeDef HAL_RTCEx_SetCoarseCalib(RTC_HandleTypeDef *hrtc, uint32_t CalibSign, uint32_t Value);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCoarseCalib(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue);
+HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
+HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);
+
+/* Extension RTC features functions *******************************************/
+void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_RTC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_sai.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,767 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sai.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of SAI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SAI_H
+#define __STM32F4xx_HAL_SAI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SAI
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief SAI Init Structure definition
+ */
+typedef struct
+{
+ uint32_t Protocol; /*!< Specifies the SAI Block protocol.
+ This parameter can be a value of @ref SAI_Block_Protocol */
+
+ uint32_t AudioMode; /*!< Specifies the SAI Block audio Mode.
+ This parameter can be a value of @ref SAI_Block_Mode */
+
+ uint32_t DataSize; /*!< Specifies the SAI Block data size.
+ This parameter can be a value of @ref SAI_Block_Data_Size */
+
+ uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
+ This parameter can be a value of @ref SAI_Block_MSB_LSB_transmission */
+
+ uint32_t ClockStrobing; /*!< Specifies the SAI Block clock strobing edge sensitivity.
+ This parameter can be a value of @ref SAI_Block_Clock_Strobing */
+
+ uint32_t Synchro; /*!< Specifies SAI Block synchronization
+ This parameter can be a value of @ref SAI_Block_Synchronization */
+
+ uint32_t OutputDrive; /*!< Specifies when SAI Block outputs are driven.
+ This parameter can be a value of @ref SAI_Block_Output_Drive
+ @note this value has to be set before enabling the audio block
+ but after the audio block configuration. */
+
+ uint32_t NoDivider; /*!< Specifies whether master clock will be divided or not.
+ This parameter can be a value of @ref SAI_Block_NoDivider
+ @note: If bit NODIV in the SAI_xCR1 register is cleared, the frame length
+ should be aligned to a number equal to a power of 2, from 8 to 256.
+ If bit NODIV in the SAI_xCR1 register is set, the frame length can
+ take any of the values without constraint since the input clock of
+ the audio block should be equal to the bit clock.
+ There is no MCLK_x clock which can be output. */
+
+ uint32_t FIFOThreshold; /*!< Specifies SAI Block FIFO threshold.
+ This parameter can be a value of @ref SAI_Block_Fifo_Threshold */
+
+ uint32_t ClockSource; /*!< Specifies the SAI Block x Clock source.
+ This parameter can be a value of @ref SAI_Clock_Source
+ @note: If ClockSource is equal to SAI_CLKSource_Ext, the PLLI2S
+ and PLLSAI divisions factors will be ignored. */
+
+ uint32_t AudioFrequency; /*!< Specifies the audio frequency sampling.
+ This parameter can be a value of @ref SAI_Audio_Frequency */
+
+}SAI_InitTypeDef;
+
+/**
+ * @brief SAI Block Frame Init structure definition
+ */
+
+typedef struct
+{
+
+ uint32_t FrameLength; /*!< Specifies the Frame length, the number of SCK clocks for each audio frame.
+ This parameter must be a number between Min_Data = 8 and Max_Data = 256.
+ @note: If master clock MCLK_x pin is declared as an output, the frame length
+ should be aligned to a number equal to power of 2 in order to keep
+ in an audio frame, an integer number of MCLK pulses by bit Clock. */
+
+ uint32_t ActiveFrameLength; /*!< Specifies the Frame synchronization active level length.
+ This Parameter specifies the length in number of bit clock (SCK + 1)
+ of the active level of FS signal in audio frame.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 128 */
+
+ uint32_t FSDefinition; /*!< Specifies the Frame synchronization definition.
+ This parameter can be a value of @ref SAI_Block_FS_Definition */
+
+ uint32_t FSPolarity; /*!< Specifies the Frame synchronization Polarity.
+ This parameter can be a value of @ref SAI_Block_FS_Polarity */
+
+ uint32_t FSOffset; /*!< Specifies the Frame synchronization Offset.
+ This parameter can be a value of @ref SAI_Block_FS_Offset */
+
+}SAI_FrameInitTypeDef;
+
+/**
+ * @brief SAI Block Slot Init Structure definition
+ */
+
+typedef struct
+{
+ uint32_t FirstBitOffset; /*!< Specifies the position of first data transfer bit in the slot.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 24 */
+
+ uint32_t SlotSize; /*!< Specifies the Slot Size.
+ This parameter can be a value of @ref SAI_Block_Slot_Size */
+
+ uint32_t SlotNumber; /*!< Specifies the number of slot in the audio frame.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t SlotActive; /*!< Specifies the slots in audio frame that will be activated.
+ This parameter can be a value of @ref SAI_Block_Slot_Active */
+}SAI_SlotInitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_SAI_STATE_RESET = 0x00, /*!< SAI not yet initialized or disabled */
+ HAL_SAI_STATE_READY = 0x01, /*!< SAI initialized and ready for use */
+ HAL_SAI_STATE_BUSY = 0x02, /*!< SAI internal process is ongoing */
+ HAL_SAI_STATE_BUSY_TX = 0x12, /*!< Data transmission process is ongoing */
+ HAL_SAI_STATE_BUSY_RX = 0x22, /*!< Data reception process is ongoing */
+ HAL_SAI_STATE_TIMEOUT = 0x03, /*!< SAI timeout state */
+ HAL_SAI_STATE_ERROR = 0x04 /*!< SAI error state */
+
+}HAL_SAI_StateTypeDef;
+
+/**
+ * @brief SAI handle Structure definition
+ */
+typedef struct
+{
+ SAI_Block_TypeDef *Instance; /*!< SAI Blockx registers base address */
+
+ SAI_InitTypeDef Init; /*!< SAI communication parameters */
+
+ SAI_FrameInitTypeDef FrameInit; /*!< SAI Frame configuration parameters */
+
+ SAI_SlotInitTypeDef SlotInit; /*!< SAI Slot configuration parameters */
+
+ uint16_t *pTxBuffPtr; /*!< Pointer to SAI Tx transfer Buffer */
+
+ uint16_t TxXferSize; /*!< SAI Tx transfer size */
+
+ uint16_t TxXferCount; /*!< SAI Tx transfer counter */
+
+ uint16_t *pRxBuffPtr; /*!< Pointer to SAI Rx transfer buffer */
+
+ uint16_t RxXferSize; /*!< SAI Rx transfer size */
+
+ uint16_t RxXferCount; /*!< SAI Rx transfer counter */
+
+ DMA_HandleTypeDef *hdmatx; /*!< SAI Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< SAI Rx DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< SAI locking object */
+
+ __IO HAL_SAI_StateTypeDef State; /*!< SAI communication state */
+
+ __IO uint32_t ErrorCode; /*!< SAI Error code */
+}SAI_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup SAI_Exported_Constants
+ * @{
+ */
+/** @defgroup SAI Error Code
+ * @{
+ */
+#define HAL_SAI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_SAI_ERROR_OVR ((uint32_t)0x00000001) /*!< Overrun Error */
+#define HAL_SAI_ERROR_UDR ((uint32_t)0x00000002) /*!< Underrun error */
+#define HAL_SAI_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Clock_Source
+ * @{
+ */
+#define SAI_CLKSOURCE_PLLSAI ((uint32_t)RCC_SAIACLKSOURCE_PLLSAI)
+#define SAI_CLKSOURCE_PLLI2S ((uint32_t)RCC_SAIACLKSOURCE_PLLI2S)
+#define SAI_CLKSOURCE_EXT ((uint32_t)RCC_SAIACLKSOURCE_EXT)
+
+#define IS_SAI_CLK_SOURCE(SOURCE) (((SOURCE) == SAI_CLKSOURCE_PLLSAI) ||\
+ ((SOURCE) == SAI_CLKSOURCE_PLLI2S) ||\
+ ((SOURCE) == SAI_CLKSOURCE_EXT))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Audio_Frequency
+ * @{
+ */
+#define SAI_AUDIO_FREQUENCY_192K ((uint32_t)192000)
+#define SAI_AUDIO_FREQUENCY_96K ((uint32_t)96000)
+#define SAI_AUDIO_FREQUENCY_48K ((uint32_t)48000)
+#define SAI_AUDIO_FREQUENCY_44K ((uint32_t)44100)
+#define SAI_AUDIO_FREQUENCY_32K ((uint32_t)32000)
+#define SAI_AUDIO_FREQUENCY_22K ((uint32_t)22050)
+#define SAI_AUDIO_FREQUENCY_16K ((uint32_t)16000)
+#define SAI_AUDIO_FREQUENCY_11K ((uint32_t)11025)
+#define SAI_AUDIO_FREQUENCY_8K ((uint32_t)8000)
+
+#define IS_SAI_AUDIO_FREQUENCY(AUDIO) (((AUDIO) == SAI_AUDIO_FREQUENCY_192K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_96K) || \
+ ((AUDIO) == SAI_AUDIO_FREQUENCY_48K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_44K) || \
+ ((AUDIO) == SAI_AUDIO_FREQUENCY_32K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_22K) || \
+ ((AUDIO) == SAI_AUDIO_FREQUENCY_16K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_11K) || \
+ ((AUDIO) == SAI_AUDIO_FREQUENCY_8K))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Mode
+ * @{
+ */
+#define SAI_MODEMASTER_TX ((uint32_t)0x00000000)
+#define SAI_MODEMASTER_RX ((uint32_t)0x00000001)
+#define SAI_MODESLAVE_TX ((uint32_t)0x00000002)
+#define SAI_MODESLAVE_RX ((uint32_t)0x00000003)
+#define IS_SAI_BLOCK_MODE(MODE) (((MODE) == SAI_MODEMASTER_TX) || \
+ ((MODE) == SAI_MODEMASTER_RX) || \
+ ((MODE) == SAI_MODESLAVE_TX) || \
+ ((MODE) == SAI_MODESLAVE_RX))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Protocol
+ * @{
+ */
+
+#define SAI_FREE_PROTOCOL ((uint32_t)0x00000000)
+#define SAI_AC97_PROTOCOL ((uint32_t)SAI_xCR1_PRTCFG_1)
+
+#define IS_SAI_BLOCK_PROTOCOL(PROTOCOL) (((PROTOCOL) == SAI_FREE_PROTOCOL) || \
+ ((PROTOCOL) == SAI_AC97_PROTOCOL))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Data_Size
+ * @{
+ */
+#define SAI_DATASIZE_8 ((uint32_t)0x00000040)
+#define SAI_DATASIZE_10 ((uint32_t)0x00000060)
+#define SAI_DATASIZE_16 ((uint32_t)0x00000080)
+#define SAI_DATASIZE_20 ((uint32_t)0x000000A0)
+#define SAI_DATASIZE_24 ((uint32_t)0x000000C0)
+#define SAI_DATASIZE_32 ((uint32_t)0x000000E0)
+
+#define IS_SAI_BLOCK_DATASIZE(DATASIZE) (((DATASIZE) == SAI_DATASIZE_8) || \
+ ((DATASIZE) == SAI_DATASIZE_10) || \
+ ((DATASIZE) == SAI_DATASIZE_16) || \
+ ((DATASIZE) == SAI_DATASIZE_20) || \
+ ((DATASIZE) == SAI_DATASIZE_24) || \
+ ((DATASIZE) == SAI_DATASIZE_32))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_MSB_LSB_transmission
+ * @{
+ */
+
+#define SAI_FIRSTBIT_MSB ((uint32_t)0x00000000)
+#define SAI_FIRSTBIT_LSB ((uint32_t)SAI_xCR1_LSBFIRST)
+
+#define IS_SAI_BLOCK_FIRST_BIT(BIT) (((BIT) == SAI_FIRSTBIT_MSB) || \
+ ((BIT) == SAI_FIRSTBIT_LSB))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Clock_Strobing
+ * @{
+ */
+#define SAI_CLOCKSTROBING_FALLINGEDGE ((uint32_t)0x00000000)
+#define SAI_CLOCKSTROBING_RISINGEDGE ((uint32_t)SAI_xCR1_CKSTR)
+
+#define IS_SAI_BLOCK_CLOCK_STROBING(CLOCK) (((CLOCK) == SAI_CLOCKSTROBING_FALLINGEDGE) || \
+ ((CLOCK) == SAI_CLOCKSTROBING_RISINGEDGE))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Synchronization
+ * @{
+ */
+#define SAI_ASYNCHRONOUS ((uint32_t)0x00000000)
+#define SAI_SYNCHRONOUS ((uint32_t)SAI_xCR1_SYNCEN_0)
+
+#define IS_SAI_BLOCK_SYNCHRO(SYNCHRO) (((SYNCHRO) == SAI_ASYNCHRONOUS) || \
+ ((SYNCHRO) == SAI_SYNCHRONOUS))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Output_Drive
+ * @{
+ */
+#define SAI_OUTPUTDRIVE_DISABLED ((uint32_t)0x00000000)
+#define SAI_OUTPUTDRIVE_ENABLED ((uint32_t)SAI_xCR1_OUTDRIV)
+
+#define IS_SAI_BLOCK_OUTPUT_DRIVE(DRIVE) (((DRIVE) == SAI_OUTPUTDRIVE_DISABLED) || \
+ ((DRIVE) == SAI_OUTPUTDRIVE_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_NoDivider
+ * @{
+ */
+#define SAI_MASTERDIVIDER_ENABLED ((uint32_t)0x00000000)
+#define SAI_MASTERDIVIDER_DISABLED ((uint32_t)SAI_xCR1_NODIV)
+
+#define IS_SAI_BLOCK_NODIVIDER(NODIVIDER) (((NODIVIDER) == SAI_MASTERDIVIDER_ENABLED) || \
+ ((NODIVIDER) == SAI_MASTERDIVIDER_DISABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Master_Divider
+ * @{
+ */
+#define IS_SAI_BLOCK_MASTER_DIVIDER(DIVIDER) ((DIVIDER) <= 15)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Frame_Length
+ * @{
+ */
+#define IS_SAI_BLOCK_FRAME_LENGTH(LENGTH) ((8 <= (LENGTH)) && ((LENGTH) <= 256))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Active_FrameLength
+ * @{
+ */
+#define IS_SAI_BLOCK_ACTIVE_FRAME(LENGTH) ((1 <= (LENGTH)) && ((LENGTH) <= 128))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_FS_Definition
+ * @{
+ */
+#define SAI_FS_STARTFRAME ((uint32_t)0x00000000)
+#define SAI_FS_CHANNEL_IDENTIFICATION ((uint32_t)SAI_xFRCR_FSDEF)
+
+#define IS_SAI_BLOCK_FS_DEFINITION(DEFINITION) (((DEFINITION) == SAI_FS_STARTFRAME) || \
+ ((DEFINITION) == SAI_FS_CHANNEL_IDENTIFICATION))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_FS_Polarity
+ * @{
+ */
+#define SAI_FS_ACTIVE_LOW ((uint32_t)0x00000000)
+#define SAI_FS_ACTIVE_HIGH ((uint32_t)SAI_xFRCR_FSPO)
+
+#define IS_SAI_BLOCK_FS_POLARITY(POLARITY) (((POLARITY) == SAI_FS_ACTIVE_LOW) || \
+ ((POLARITY) == SAI_FS_ACTIVE_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_FS_Offset
+ * @{
+ */
+#define SAI_FS_FIRSTBIT ((uint32_t)0x00000000)
+#define SAI_FS_BEFOREFIRSTBIT ((uint32_t)SAI_xFRCR_FSOFF)
+
+#define IS_SAI_BLOCK_FS_OFFSET(OFFSET) (((OFFSET) == SAI_FS_FIRSTBIT) || \
+ ((OFFSET) == SAI_FS_BEFOREFIRSTBIT))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Slot_FirstBit_Offset
+ * @{
+ */
+#define IS_SAI_BLOCK_FIRSTBIT_OFFSET(OFFSET) ((OFFSET) <= 24)
+/**
+ * @}
+ */
+
+ /** @defgroup SAI_Block_Slot_Size
+ * @{
+ */
+#define SAI_SLOTSIZE_DATASIZE ((uint32_t)0x00000000)
+#define SAI_SLOTSIZE_16B ((uint32_t)SAI_xSLOTR_SLOTSZ_0)
+#define SAI_SLOTSIZE_32B ((uint32_t)SAI_xSLOTR_SLOTSZ_1)
+
+#define IS_SAI_BLOCK_SLOT_SIZE(SIZE) (((SIZE) == SAI_SLOTSIZE_DATASIZE) || \
+ ((SIZE) == SAI_SLOTSIZE_16B) || \
+ ((SIZE) == SAI_SLOTSIZE_32B))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Slot_Number
+ * @{
+ */
+#define IS_SAI_BLOCK_SLOT_NUMBER(NUMBER) ((1 <= (NUMBER)) && ((NUMBER) <= 16))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Slot_Active
+ * @{
+ */
+#define SAI_SLOT_NOTACTIVE ((uint32_t)0x00000000)
+#define SAI_SLOTACTIVE_0 ((uint32_t)0x00010000)
+#define SAI_SLOTACTIVE_1 ((uint32_t)0x00020000)
+#define SAI_SLOTACTIVE_2 ((uint32_t)0x00040000)
+#define SAI_SLOTACTIVE_3 ((uint32_t)0x00080000)
+#define SAI_SLOTACTIVE_4 ((uint32_t)0x00100000)
+#define SAI_SLOTACTIVE_5 ((uint32_t)0x00200000)
+#define SAI_SLOTACTIVE_6 ((uint32_t)0x00400000)
+#define SAI_SLOTACTIVE_7 ((uint32_t)0x00800000)
+#define SAI_SLOTACTIVE_8 ((uint32_t)0x01000000)
+#define SAI_SLOTACTIVE_9 ((uint32_t)0x02000000)
+#define SAI_SLOTACTIVE_10 ((uint32_t)0x04000000)
+#define SAI_SLOTACTIVE_11 ((uint32_t)0x08000000)
+#define SAI_SLOTACTIVE_12 ((uint32_t)0x10000000)
+#define SAI_SLOTACTIVE_13 ((uint32_t)0x20000000)
+#define SAI_SLOTACTIVE_14 ((uint32_t)0x40000000)
+#define SAI_SLOTACTIVE_15 ((uint32_t)0x80000000)
+#define SAI_SLOTACTIVE_ALL ((uint32_t)0xFFFF0000)
+
+#define IS_SAI_SLOT_ACTIVE(ACTIVE) ((ACTIVE) != 0)
+
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Mono_Stereo_Mode
+ * @{
+ */
+#define SAI_MONOMODE ((uint32_t)SAI_xCR1_MONO)
+#define SAI_STREOMODE ((uint32_t)0x00000000)
+
+#define IS_SAI_BLOCK_MONO_STREO_MODE(MODE) (((MODE) == SAI_MONOMODE) ||\
+ ((MODE) == SAI_STREOMODE))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_TRIState_Management
+ * @{
+ */
+#define SAI_OUTPUT_NOTRELEASED ((uint32_t)0x00000000)
+#define SAI_OUTPUT_RELEASED ((uint32_t)SAI_xCR2_TRIS)
+
+#define IS_SAI_BLOCK_TRISTATE_MANAGEMENT(STATE) (((STATE) == SAI_OUTPUT_NOTRELEASED) ||\
+ ((STATE) == SAI_OUTPUT_RELEASED))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Fifo_Threshold
+ * @{
+ */
+#define SAI_FIFOTHRESHOLD_EMPTY ((uint32_t)0x00000000)
+#define SAI_FIFOTHRESHOLD_1QF ((uint32_t)0x00000001)
+#define SAI_FIFOTHRESHOLD_HF ((uint32_t)0x00000002)
+#define SAI_FIFOTHRESHOLD_3QF ((uint32_t)0x00000003)
+#define SAI_FIFOTHRESHOLD_FULL ((uint32_t)0x00000004)
+
+#define IS_SAI_BLOCK_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == SAI_FIFOTHRESHOLD_EMPTY) || \
+ ((THRESHOLD) == SAI_FIFOTHRESHOLD_1QF) || \
+ ((THRESHOLD) == SAI_FIFOTHRESHOLD_HF) || \
+ ((THRESHOLD) == SAI_FIFOTHRESHOLD_3QF) || \
+ ((THRESHOLD) == SAI_FIFOTHRESHOLD_FULL))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Companding_Mode
+ * @{
+ */
+#define SAI_NOCOMPANDING ((uint32_t)0x00000000)
+#define SAI_ULAW_1CPL_COMPANDING ((uint32_t)0x00008000)
+#define SAI_ALAW_1CPL_COMPANDING ((uint32_t)0x0000C000)
+#define SAI_ULAW_2CPL_COMPANDING ((uint32_t)0x0000A000)
+#define SAI_ALAW_2CPL_COMPANDING ((uint32_t)0x0000E000)
+
+#define IS_SAI_BLOCK_COMPANDING_MODE(MODE) (((MODE) == SAI_NOCOMPANDING) || \
+ ((MODE) == SAI_ULAW_1CPL_COMPANDING) || \
+ ((MODE) == SAI_ALAW_1CPL_COMPANDING) || \
+ ((MODE) == SAI_ULAW_2CPL_COMPANDING) || \
+ ((MODE) == SAI_ALAW_2CPL_COMPANDING))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Mute_Value
+ * @{
+ */
+#define SAI_ZERO_VALUE ((uint32_t)0x00000000)
+#define SAI_LAST_SENT_VALUE ((uint32_t)SAI_xCR2_MUTEVAL)
+
+#define IS_SAI_BLOCK_MUTE_VALUE(VALUE) (((VALUE) == SAI_ZERO_VALUE) || \
+ ((VALUE) == SAI_LAST_SENT_VALUE))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Mute_Frame_Counter
+ * @{
+ */
+#define IS_SAI_BLOCK_MUTE_COUNTER(COUNTER) ((COUNTER) <= 63)
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Interrupts_Definition
+ * @{
+ */
+#define SAI_IT_OVRUDR ((uint32_t)SAI_xIMR_OVRUDRIE)
+#define SAI_IT_MUTEDET ((uint32_t)SAI_xIMR_MUTEDETIE)
+#define SAI_IT_WCKCFG ((uint32_t)SAI_xIMR_WCKCFGIE)
+#define SAI_IT_FREQ ((uint32_t)SAI_xIMR_FREQIE)
+#define SAI_IT_CNRDY ((uint32_t)SAI_xIMR_CNRDYIE)
+#define SAI_IT_AFSDET ((uint32_t)SAI_xIMR_AFSDETIE)
+#define SAI_IT_LFSDET ((uint32_t)SAI_xIMR_LFSDETIE)
+
+#define IS_SAI_BLOCK_CONFIG_IT(IT) (((IT) == SAI_IT_OVRUDR) || \
+ ((IT) == SAI_IT_MUTEDET) || \
+ ((IT) == SAI_IT_WCKCFG) || \
+ ((IT) == SAI_IT_FREQ) || \
+ ((IT) == SAI_IT_CNRDY) || \
+ ((IT) == SAI_IT_AFSDET) || \
+ ((IT) == SAI_IT_LFSDET))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Flags_Definition
+ * @{
+ */
+#define SAI_FLAG_OVRUDR ((uint32_t)SAI_xSR_OVRUDR)
+#define SAI_FLAG_MUTEDET ((uint32_t)SAI_xSR_MUTEDET)
+#define SAI_FLAG_WCKCFG ((uint32_t)SAI_xSR_WCKCFG)
+#define SAI_FLAG_FREQ ((uint32_t)SAI_xSR_FREQ)
+#define SAI_FLAG_CNRDY ((uint32_t)SAI_xSR_CNRDY)
+#define SAI_FLAG_AFSDET ((uint32_t)SAI_xSR_AFSDET)
+#define SAI_FLAG_LFSDET ((uint32_t)SAI_xSR_LFSDET)
+
+#define IS_SAI_BLOCK_GET_FLAG(FLAG) (((FLAG) == SAI_FLAG_OVRUDR) || \
+ ((FLAG) == SAI_FLAG_MUTEDET) || \
+ ((FLAG) == SAI_FLAG_WCKCFG) || \
+ ((FLAG) == SAI_FLAG_FREQ) || \
+ ((FLAG) == SAI_FLAG_CNRDY) || \
+ ((FLAG) == SAI_FLAG_AFSDET) || \
+ ((FLAG) == SAI_FLAG_LFSDET))
+
+#define IS_SAI_BLOCK_CLEAR_FLAG(FLAG) (((FLAG) == SAI_FLAG_OVRUDR) || \
+ ((FLAG) == SAI_FLAG_MUTEDET) || \
+ ((FLAG) == SAI_FLAG_WCKCFG) || \
+ ((FLAG) == SAI_FLAG_FREQ) || \
+ ((FLAG) == SAI_FLAG_CNRDY) || \
+ ((FLAG) == SAI_FLAG_AFSDET) || \
+ ((FLAG) == SAI_FLAG_LFSDET))
+/**
+ * @}
+ */
+
+/** @defgroup SAI_Block_Fifo_Status_Level
+ * @{
+ */
+#define SAI_FIFOStatus_Empty ((uint32_t)0x00000000)
+#define SAI_FIFOStatus_Less1QuarterFull ((uint32_t)0x00010000)
+#define SAI_FIFOStatus_1QuarterFull ((uint32_t)0x00020000)
+#define SAI_FIFOStatus_HalfFull ((uint32_t)0x00030000)
+#define SAI_FIFOStatus_3QuartersFull ((uint32_t)0x00040000)
+#define SAI_FIFOStatus_Full ((uint32_t)0x00050000)
+
+#define IS_SAI_BLOCK_FIFO_STATUS(STATUS) (((STATUS) == SAI_FIFOStatus_Less1QuarterFull ) || \
+ ((STATUS) == SAI_FIFOStatus_HalfFull) || \
+ ((STATUS) == SAI_FIFOStatus_1QuarterFull) || \
+ ((STATUS) == SAI_FIFOStatus_3QuartersFull) || \
+ ((STATUS) == SAI_FIFOStatus_Full) || \
+ ((STATUS) == SAI_FIFOStatus_Empty))
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @brief Reset SAI handle state
+ * @param __HANDLE__: specifies the SAI Handle.
+ * @retval None
+ */
+#define __HAL_SAI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SAI_STATE_RESET)
+
+/** @brief Enable or disable the specified SAI interrupts.
+ * @param __HANDLE__: specifies the SAI Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg SAI_IT_OVRUDR: Overrun underrun interrupt enable
+ * @arg SAI_IT_MUTEDET: Mute detection interrupt enable
+ * @arg SAI_IT_WCKCFG: Wrong Clock Configuration interrupt enable
+ * @arg SAI_IT_FREQ: FIFO request interrupt enable
+ * @arg SAI_IT_CNRDY: Codec not ready interrupt enable
+ * @arg SAI_IT_AFSDET: Anticipated frame synchronization detection interrupt enable
+ * @arg SAI_IT_LFSDET: Late frame synchronization detection interrupt enabl
+ * @retval None
+ */
+
+#define __HAL_SAI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR |= (__INTERRUPT__))
+#define __HAL_SAI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR &= (~(__INTERRUPT__)))
+
+/** @brief Check if the specified SAI interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the SAI Handle.
+ * This parameter can be SAI where x: 1, 2, or 3 to select the SAI peripheral.
+ * @param __INTERRUPT__: specifies the SAI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SAI_IT_TXE: Tx buffer empty interrupt enable.
+ * @arg SAI_IT_RXNE: Rx buffer not empty interrupt enable.
+ * @arg SAI_IT_ERR: Error interrupt enable.
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_SAI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IMR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Check whether the specified SAI flag is set or not.
+ * @param __HANDLE__: specifies the SAI Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SAI_FLAG_OVRUDR: Overrun underrun flag.
+ * @arg SAI_FLAG_MUTEDET: Mute detection flag.
+ * @arg SAI_FLAG_WCKCFG: Wrong Clock Configuration flag.
+ * @arg SAI_FLAG_FREQ: FIFO request flag.
+ * @arg SAI_FLAG_CNRDY: Codec not ready flag.
+ * @arg SAI_FLAG_AFSDET: Anticipated frame synchronization detection flag.
+ * @arg SAI_FLAG_LFSDET: Late frame synchronization detection flag.
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SAI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified SAI pending flag.
+ * @param __HANDLE__: specifies the SAI Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg SAI_FLAG_OVRUDR: Clear Overrun underrun
+ * @arg SAI_FLAG_MUTEDET: Clear Mute detection
+ * @arg SAI_FLAG_WCKCFG: Clear Wrong Clock Configuration
+ * @arg SAI_FLAG_FREQ: Clear FIFO request
+ * @arg SAI_FLAG_CNRDY: Clear Codec not ready
+ * @arg SAI_FLAG_AFSDET: Clear Anticipated frame synchronization detection
+ * @arg SAI_FLAG_LFSDET: Clear Late frame synchronization detection
+ *
+ * @retval None
+ */
+#define __HAL_SAI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CLRFR = (__FLAG__))
+
+#define __HAL_SAI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SAI_xCR1_SAIEN)
+#define __HAL_SAI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~SAI_xCR1_SAIEN)
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SAI_Init(SAI_HandleTypeDef *hsai);
+HAL_StatusTypeDef HAL_SAI_DeInit (SAI_HandleTypeDef *hsai);
+void HAL_SAI_MspInit(SAI_HandleTypeDef *hsai);
+void HAL_SAI_MspDeInit(SAI_HandleTypeDef *hsai);
+
+/* I/O operation functions *****************************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_SAI_Transmit(SAI_HandleTypeDef *hsai, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SAI_Receive(SAI_HandleTypeDef *hsai, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_SAI_Transmit_IT(SAI_HandleTypeDef *hsai, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SAI_Receive_IT(SAI_HandleTypeDef *hsai, uint16_t *pData, uint16_t Size);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_SAI_Transmit_DMA(SAI_HandleTypeDef *hsai, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SAI_Receive_DMA(SAI_HandleTypeDef *hsai, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SAI_DMAPause(SAI_HandleTypeDef *hsai);
+HAL_StatusTypeDef HAL_SAI_DMAResume(SAI_HandleTypeDef *hsai);
+HAL_StatusTypeDef HAL_SAI_DMAStop(SAI_HandleTypeDef *hsai);
+
+/* SAI IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_SAI_IRQHandler(SAI_HandleTypeDef *hsai);
+void HAL_SAI_TxHalfCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_TxCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_RxHalfCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_RxCpltCallback(SAI_HandleTypeDef *hsai);
+void HAL_SAI_ErrorCallback(SAI_HandleTypeDef *hsai);
+
+/* Peripheral State functions **************************************************/
+HAL_SAI_StateTypeDef HAL_SAI_GetState(SAI_HandleTypeDef *hsai);
+uint32_t HAL_SAI_GetError(SAI_HandleTypeDef *hsai);
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SAI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_sd.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,699 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sd.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of SD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SD_H
+#define __STM32F4xx_HAL_SD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_sdmmc.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SD_Exported_Types
+ * @{
+ */
+#define SD_InitTypeDef SDIO_InitTypeDef
+#define SD_TypeDef SDIO_TypeDef
+
+/**
+ * @brief SDIO Handle Structure definition
+ */
+typedef struct
+{
+ SD_TypeDef *Instance; /*!< SDIO register base address */
+
+ SD_InitTypeDef Init; /*!< SD required parameters */
+
+ HAL_LockTypeDef Lock; /*!< SD locking object */
+
+ uint32_t CardType; /*!< SD card type */
+
+ uint32_t RCA; /*!< SD relative card address */
+
+ uint32_t CSD[4]; /*!< SD card specific data table */
+
+ uint32_t CID[4]; /*!< SD card identification number table */
+
+ __IO uint32_t SdTransferCplt; /*!< SD transfer complete flag in non blocking mode */
+
+ __IO uint32_t SdTransferErr; /*!< SD transfer error flag in non blocking mode */
+
+ __IO uint32_t DmaTransferCplt; /*!< SD DMA transfer complete flag */
+
+ __IO uint32_t SdOperation; /*!< SD transfer operation (read/write) */
+
+ DMA_HandleTypeDef *hdmarx; /*!< SD Rx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmatx; /*!< SD Tx DMA handle parameters */
+
+}SD_HandleTypeDef;
+
+/**
+ * @brief Card Specific Data: CSD Register
+ */
+typedef struct
+{
+ __IO uint8_t CSDStruct; /*!< CSD structure */
+ __IO uint8_t SysSpecVersion; /*!< System specification version */
+ __IO uint8_t Reserved1; /*!< Reserved */
+ __IO uint8_t TAAC; /*!< Data read access time 1 */
+ __IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */
+ __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */
+ __IO uint16_t CardComdClasses; /*!< Card command classes */
+ __IO uint8_t RdBlockLen; /*!< Max. read data block length */
+ __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */
+ __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */
+ __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */
+ __IO uint8_t DSRImpl; /*!< DSR implemented */
+ __IO uint8_t Reserved2; /*!< Reserved */
+ __IO uint32_t DeviceSize; /*!< Device Size */
+ __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */
+ __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */
+ __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */
+ __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */
+ __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */
+ __IO uint8_t EraseGrSize; /*!< Erase group size */
+ __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */
+ __IO uint8_t WrProtectGrSize; /*!< Write protect group size */
+ __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */
+ __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */
+ __IO uint8_t WrSpeedFact; /*!< Write speed factor */
+ __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */
+ __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */
+ __IO uint8_t Reserved3; /*!< Reserved */
+ __IO uint8_t ContentProtectAppli; /*!< Content protection application */
+ __IO uint8_t FileFormatGrouop; /*!< File format group */
+ __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */
+ __IO uint8_t PermWrProtect; /*!< Permanent write protection */
+ __IO uint8_t TempWrProtect; /*!< Temporary write protection */
+ __IO uint8_t FileFormat; /*!< File format */
+ __IO uint8_t ECC; /*!< ECC code */
+ __IO uint8_t CSD_CRC; /*!< CSD CRC */
+ __IO uint8_t Reserved4; /*!< Always 1 */
+
+}HAL_SD_CSDTypedef;
+
+/**
+ * @brief Card Identification Data: CID Register
+ */
+typedef struct
+{
+ __IO uint8_t ManufacturerID; /*!< Manufacturer ID */
+ __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */
+ __IO uint32_t ProdName1; /*!< Product Name part1 */
+ __IO uint8_t ProdName2; /*!< Product Name part2 */
+ __IO uint8_t ProdRev; /*!< Product Revision */
+ __IO uint32_t ProdSN; /*!< Product Serial Number */
+ __IO uint8_t Reserved1; /*!< Reserved1 */
+ __IO uint16_t ManufactDate; /*!< Manufacturing Date */
+ __IO uint8_t CID_CRC; /*!< CID CRC */
+ __IO uint8_t Reserved2; /*!< Always 1 */
+
+}HAL_SD_CIDTypedef;
+
+/**
+ * @brief SD Card Status returned by ACMD13
+ */
+typedef struct
+{
+ __IO uint8_t DAT_BUS_WIDTH; /*!< Shows the currently defined data bus width */
+ __IO uint8_t SECURED_MODE; /*!< Card is in secured mode of operation */
+ __IO uint16_t SD_CARD_TYPE; /*!< Carries information about card type */
+ __IO uint32_t SIZE_OF_PROTECTED_AREA; /*!< Carries information about the capacity of protected area */
+ __IO uint8_t SPEED_CLASS; /*!< Carries information about the speed class of the card */
+ __IO uint8_t PERFORMANCE_MOVE; /*!< Carries information about the card's performance move */
+ __IO uint8_t AU_SIZE; /*!< Carries information about the card's allocation unit size */
+ __IO uint16_t ERASE_SIZE; /*!< Determines the number of AUs to be erased in one operation */
+ __IO uint8_t ERASE_TIMEOUT; /*!< Determines the timeout for any number of AU erase */
+ __IO uint8_t ERASE_OFFSET; /*!< Carries information about the erase offset */
+
+}HAL_SD_CardStatusTypedef;
+
+/**
+ * @brief SD Card information structure
+ */
+typedef struct
+{
+ HAL_SD_CSDTypedef SD_csd; /*!< SD card specific data register */
+ HAL_SD_CIDTypedef SD_cid; /*!< SD card identification number register */
+ uint64_t CardCapacity; /*!< Card capacity */
+ uint32_t CardBlockSize; /*!< Card block size */
+ uint16_t RCA; /*!< SD relative card address */
+ uint8_t CardType; /*!< SD card type */
+
+}HAL_SD_CardInfoTypedef;
+
+/**
+ * @brief SD Error status enumeration Structure definition
+ */
+typedef enum
+{
+/**
+ * @brief SD specific error defines
+ */
+ SD_CMD_CRC_FAIL = (1), /*!< Command response received (but CRC check failed) */
+ SD_DATA_CRC_FAIL = (2), /*!< Data block sent/received (CRC check failed) */
+ SD_CMD_RSP_TIMEOUT = (3), /*!< Command response timeout */
+ SD_DATA_TIMEOUT = (4), /*!< Data timeout */
+ SD_TX_UNDERRUN = (5), /*!< Transmit FIFO underrun */
+ SD_RX_OVERRUN = (6), /*!< Receive FIFO overrun */
+ SD_START_BIT_ERR = (7), /*!< Start bit not detected on all data signals in wide bus mode */
+ SD_CMD_OUT_OF_RANGE = (8), /*!< Command's argument was out of range. */
+ SD_ADDR_MISALIGNED = (9), /*!< Misaligned address */
+ SD_BLOCK_LEN_ERR = (10), /*!< Transferred block length is not allowed for the card or the number of transferred bytes does not match the block length */
+ SD_ERASE_SEQ_ERR = (11), /*!< An error in the sequence of erase command occurs. */
+ SD_BAD_ERASE_PARAM = (12), /*!< An invalid selection for erase groups */
+ SD_WRITE_PROT_VIOLATION = (13), /*!< Attempt to program a write protect block */
+ SD_LOCK_UNLOCK_FAILED = (14), /*!< Sequence or password error has been detected in unlock command or if there was an attempt to access a locked card */
+ SD_COM_CRC_FAILED = (15), /*!< CRC check of the previous command failed */
+ SD_ILLEGAL_CMD = (16), /*!< Command is not legal for the card state */
+ SD_CARD_ECC_FAILED = (17), /*!< Card internal ECC was applied but failed to correct the data */
+ SD_CC_ERROR = (18), /*!< Internal card controller error */
+ SD_GENERAL_UNKNOWN_ERROR = (19), /*!< General or unknown error */
+ SD_STREAM_READ_UNDERRUN = (20), /*!< The card could not sustain data transfer in stream read operation. */
+ SD_STREAM_WRITE_OVERRUN = (21), /*!< The card could not sustain data programming in stream mode */
+ SD_CID_CSD_OVERWRITE = (22), /*!< CID/CSD overwrite error */
+ SD_WP_ERASE_SKIP = (23), /*!< Only partial address space was erased */
+ SD_CARD_ECC_DISABLED = (24), /*!< Command has been executed without using internal ECC */
+ SD_ERASE_RESET = (25), /*!< Erase sequence was cleared before executing because an out of erase sequence command was received */
+ SD_AKE_SEQ_ERROR = (26), /*!< Error in sequence of authentication. */
+ SD_INVALID_VOLTRANGE = (27),
+ SD_ADDR_OUT_OF_RANGE = (28),
+ SD_SWITCH_ERROR = (29),
+ SD_SDIO_DISABLED = (30),
+ SD_SDIO_FUNCTION_BUSY = (31),
+ SD_SDIO_FUNCTION_FAILED = (32),
+ SD_SDIO_UNKNOWN_FUNCTION = (33),
+
+/**
+ * @brief Standard error defines
+ */
+ SD_INTERNAL_ERROR = (34),
+ SD_NOT_CONFIGURED = (35),
+ SD_REQUEST_PENDING = (36),
+ SD_REQUEST_NOT_APPLICABLE = (37),
+ SD_INVALID_PARAMETER = (38),
+ SD_UNSUPPORTED_FEATURE = (39),
+ SD_UNSUPPORTED_HW = (40),
+ SD_ERROR = (41),
+ SD_OK = (0)
+
+}HAL_SD_ErrorTypedef;
+
+/**
+ * @brief SD Transfer state enumeration structure
+ */
+typedef enum
+{
+ SD_TRANSFER_OK = 0, /*!< Transfer success */
+ SD_TRANSFER_BUSY = 1, /*!< Transfer is occurring */
+ SD_TRANSFER_ERROR = 2 /*!< Transfer failed */
+
+}HAL_SD_TransferStateTypedef;
+
+/**
+ * @brief SD Card State enumeration structure
+ */
+typedef enum
+{
+ SD_CARD_READY = ((uint32_t)0x00000001), /*!< Card state is ready */
+ SD_CARD_IDENTIFICATION = ((uint32_t)0x00000002), /*!< Card is in identification state */
+ SD_CARD_STANDBY = ((uint32_t)0x00000003), /*!< Card is in standby state */
+ SD_CARD_TRANSFER = ((uint32_t)0x00000004), /*!< Card is in transfer state */
+ SD_CARD_SENDING = ((uint32_t)0x00000005), /*!< Card is sending an operation */
+ SD_CARD_RECEIVING = ((uint32_t)0x00000006), /*!< Card is receiving operation information */
+ SD_CARD_PROGRAMMING = ((uint32_t)0x00000007), /*!< Card is in programming state */
+ SD_CARD_DISCONNECTED = ((uint32_t)0x00000008), /*!< Card is disconnected */
+ SD_CARD_ERROR = ((uint32_t)0x000000FF) /*!< Card is in error state */
+
+}HAL_SD_CardStateTypedef;
+
+/**
+ * @brief SD Operation enumeration structure
+ */
+typedef enum
+{
+ SD_READ_SINGLE_BLOCK = 0, /*!< Read single block operation */
+ SD_READ_MULTIPLE_BLOCK = 1, /*!< Read multiple blocks operation */
+ SD_WRITE_SINGLE_BLOCK = 2, /*!< Write single block operation */
+ SD_WRITE_MULTIPLE_BLOCK = 3 /*!< Write multiple blocks operation */
+
+}HAL_SD_OperationTypedef;
+
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SD_Exported_Constants
+ * @{
+ */
+
+/**
+ * @brief SD Commands Index
+ */
+#define SD_CMD_GO_IDLE_STATE ((uint8_t)0) /*!< Resets the SD memory card. */
+#define SD_CMD_SEND_OP_COND ((uint8_t)1) /*!< Sends host capacity support information and activates the card's initialization process. */
+#define SD_CMD_ALL_SEND_CID ((uint8_t)2) /*!< Asks any card connected to the host to send the CID numbers on the CMD line. */
+#define SD_CMD_SET_REL_ADDR ((uint8_t)3) /*!< Asks the card to publish a new relative address (RCA). */
+#define SD_CMD_SET_DSR ((uint8_t)4) /*!< Programs the DSR of all cards. */
+#define SD_CMD_SDIO_SEN_OP_COND ((uint8_t)5) /*!< Sends host capacity support information (HCS) and asks the accessed card to send its
+ operating condition register (OCR) content in the response on the CMD line. */
+#define SD_CMD_HS_SWITCH ((uint8_t)6) /*!< Checks switchable function (mode 0) and switch card function (mode 1). */
+#define SD_CMD_SEL_DESEL_CARD ((uint8_t)7) /*!< Selects the card by its own relative address and gets deselected by any other address */
+#define SD_CMD_HS_SEND_EXT_CSD ((uint8_t)8) /*!< Sends SD Memory Card interface condition, which includes host supply voltage information
+ and asks the card whether card supports voltage. */
+#define SD_CMD_SEND_CSD ((uint8_t)9) /*!< Addressed card sends its card specific data (CSD) on the CMD line. */
+#define SD_CMD_SEND_CID ((uint8_t)10) /*!< Addressed card sends its card identification (CID) on the CMD line. */
+#define SD_CMD_READ_DAT_UNTIL_STOP ((uint8_t)11) /*!< SD card doesn't support it. */
+#define SD_CMD_STOP_TRANSMISSION ((uint8_t)12) /*!< Forces the card to stop transmission. */
+#define SD_CMD_SEND_STATUS ((uint8_t)13) /*!< Addressed card sends its status register. */
+#define SD_CMD_HS_BUSTEST_READ ((uint8_t)14)
+#define SD_CMD_GO_INACTIVE_STATE ((uint8_t)15) /*!< Sends an addressed card into the inactive state. */
+#define SD_CMD_SET_BLOCKLEN ((uint8_t)16) /*!< Sets the block length (in bytes for SDSC) for all following block commands
+ (read, write, lock). Default block length is fixed to 512 Bytes. Not effective
+ for SDHS and SDXC. */
+#define SD_CMD_READ_SINGLE_BLOCK ((uint8_t)17) /*!< Reads single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of
+ fixed 512 bytes in case of SDHC and SDXC. */
+#define SD_CMD_READ_MULT_BLOCK ((uint8_t)18) /*!< Continuously transfers data blocks from card to host until interrupted by
+ STOP_TRANSMISSION command. */
+#define SD_CMD_HS_BUSTEST_WRITE ((uint8_t)19) /*!< 64 bytes tuning pattern is sent for SDR50 and SDR104. */
+#define SD_CMD_WRITE_DAT_UNTIL_STOP ((uint8_t)20) /*!< Speed class control command. */
+#define SD_CMD_SET_BLOCK_COUNT ((uint8_t)23) /*!< Specify block count for CMD18 and CMD25. */
+#define SD_CMD_WRITE_SINGLE_BLOCK ((uint8_t)24) /*!< Writes single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of
+ fixed 512 bytes in case of SDHC and SDXC. */
+#define SD_CMD_WRITE_MULT_BLOCK ((uint8_t)25) /*!< Continuously writes blocks of data until a STOP_TRANSMISSION follows. */
+#define SD_CMD_PROG_CID ((uint8_t)26) /*!< Reserved for manufacturers. */
+#define SD_CMD_PROG_CSD ((uint8_t)27) /*!< Programming of the programmable bits of the CSD. */
+#define SD_CMD_SET_WRITE_PROT ((uint8_t)28) /*!< Sets the write protection bit of the addressed group. */
+#define SD_CMD_CLR_WRITE_PROT ((uint8_t)29) /*!< Clears the write protection bit of the addressed group. */
+#define SD_CMD_SEND_WRITE_PROT ((uint8_t)30) /*!< Asks the card to send the status of the write protection bits. */
+#define SD_CMD_SD_ERASE_GRP_START ((uint8_t)32) /*!< Sets the address of the first write block to be erased. (For SD card only). */
+#define SD_CMD_SD_ERASE_GRP_END ((uint8_t)33) /*!< Sets the address of the last write block of the continuous range to be erased. */
+#define SD_CMD_ERASE_GRP_START ((uint8_t)35) /*!< Sets the address of the first write block to be erased. Reserved for each command
+ system set by switch function command (CMD6). */
+#define SD_CMD_ERASE_GRP_END ((uint8_t)36) /*!< Sets the address of the last write block of the continuous range to be erased.
+ Reserved for each command system set by switch function command (CMD6). */
+#define SD_CMD_ERASE ((uint8_t)38) /*!< Reserved for SD security applications. */
+#define SD_CMD_FAST_IO ((uint8_t)39) /*!< SD card doesn't support it (Reserved). */
+#define SD_CMD_GO_IRQ_STATE ((uint8_t)40) /*!< SD card doesn't support it (Reserved). */
+#define SD_CMD_LOCK_UNLOCK ((uint8_t)42) /*!< Sets/resets the password or lock/unlock the card. The size of the data block is set by
+ the SET_BLOCK_LEN command. */
+#define SD_CMD_APP_CMD ((uint8_t)55) /*!< Indicates to the card that the next command is an application specific command rather
+ than a standard command. */
+#define SD_CMD_GEN_CMD ((uint8_t)56) /*!< Used either to transfer a data block to the card or to get a data block from the card
+ for general purpose/application specific commands. */
+#define SD_CMD_NO_CMD ((uint8_t)64)
+
+/**
+ * @brief Following commands are SD Card Specific commands.
+ * SDIO_APP_CMD should be sent before sending these commands.
+ */
+#define SD_CMD_APP_SD_SET_BUSWIDTH ((uint8_t)6) /*!< (ACMD6) Defines the data bus width to be used for data transfer. The allowed data bus
+ widths are given in SCR register. */
+#define SD_CMD_SD_APP_STAUS ((uint8_t)13) /*!< (ACMD13) Sends the SD status. */
+#define SD_CMD_SD_APP_SEND_NUM_WRITE_BLOCKS ((uint8_t)22) /*!< (ACMD22) Sends the number of the written (without errors) write blocks. Responds with
+ 32bit+CRC data block. */
+#define SD_CMD_SD_APP_OP_COND ((uint8_t)41) /*!< (ACMD41) Sends host capacity support information (HCS) and asks the accessed card to
+ send its operating condition register (OCR) content in the response on the CMD line. */
+#define SD_CMD_SD_APP_SET_CLR_CARD_DETECT ((uint8_t)42) /*!< (ACMD42) Connects/Disconnects the 50 KOhm pull-up resistor on CD/DAT3 (pin 1) of the card. */
+#define SD_CMD_SD_APP_SEND_SCR ((uint8_t)51) /*!< Reads the SD Configuration Register (SCR). */
+#define SD_CMD_SDIO_RW_DIRECT ((uint8_t)52) /*!< For SD I/O card only, reserved for security specification. */
+#define SD_CMD_SDIO_RW_EXTENDED ((uint8_t)53) /*!< For SD I/O card only, reserved for security specification. */
+
+/**
+ * @brief Following commands are SD Card Specific security commands.
+ * SD_CMD_APP_CMD should be sent before sending these commands.
+ */
+#define SD_CMD_SD_APP_GET_MKB ((uint8_t)43) /*!< For SD card only */
+#define SD_CMD_SD_APP_GET_MID ((uint8_t)44) /*!< For SD card only */
+#define SD_CMD_SD_APP_SET_CER_RN1 ((uint8_t)45) /*!< For SD card only */
+#define SD_CMD_SD_APP_GET_CER_RN2 ((uint8_t)46) /*!< For SD card only */
+#define SD_CMD_SD_APP_SET_CER_RES2 ((uint8_t)47) /*!< For SD card only */
+#define SD_CMD_SD_APP_GET_CER_RES1 ((uint8_t)48) /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_READ_MULTIPLE_BLOCK ((uint8_t)18) /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK ((uint8_t)25) /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_ERASE ((uint8_t)38) /*!< For SD card only */
+#define SD_CMD_SD_APP_CHANGE_SECURE_AREA ((uint8_t)49) /*!< For SD card only */
+#define SD_CMD_SD_APP_SECURE_WRITE_MKB ((uint8_t)48) /*!< For SD card only */
+
+/**
+ * @brief Supported SD Memory Cards
+ */
+#define STD_CAPACITY_SD_CARD_V1_1 ((uint32_t)0x00000000)
+#define STD_CAPACITY_SD_CARD_V2_0 ((uint32_t)0x00000001)
+#define HIGH_CAPACITY_SD_CARD ((uint32_t)0x00000002)
+#define MULTIMEDIA_CARD ((uint32_t)0x00000003)
+#define SECURE_DIGITAL_IO_CARD ((uint32_t)0x00000004)
+#define HIGH_SPEED_MULTIMEDIA_CARD ((uint32_t)0x00000005)
+#define SECURE_DIGITAL_IO_COMBO_CARD ((uint32_t)0x00000006)
+#define HIGH_CAPACITY_MMC_CARD ((uint32_t)0x00000007)
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup SD_Exported_macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+
+/**
+ * @brief Enable the SD device.
+ * @retval None
+ */
+#define __HAL_SD_SDIO_ENABLE() __SDIO_ENABLE()
+
+/**
+ * @brief Disable the SD device.
+ * @retval None
+ */
+#define __HAL_SD_SDIO_DISABLE() __SDIO_DISABLE()
+
+/**
+ * @brief Enable the SDIO DMA transfer.
+ * @retval None
+ */
+#define __HAL_SD_SDIO_DMA_ENABLE() __SDIO_DMA_ENABLE()
+
+/**
+ * @brief Disable the SDIO DMA transfer.
+ * @retval None
+ */
+#define __HAL_SD_SDIO_DMA_DISABLE() __SDIO_DMA_DISABLE()
+
+/**
+ * @brief Enable the SD device interrupt.
+ * @param __HANDLE__: SD Handle
+ * @param __INTERRUPT__: specifies the SDIO interrupt sources to be enabled.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval None
+ */
+#define __HAL_SD_SDIO_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+ * @brief Disable the SD device interrupt.
+ * @param __HANDLE__: SD Handle
+ * @param __INTERRUPT__: specifies the SDIO interrupt sources to be disabled.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval None
+ */
+#define __HAL_SD_SDIO_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified SD flag is set or not.
+ * @param __HANDLE__: SD Handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDIO_FLAG_DTIMEOUT: Data timeout
+ * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
+ * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode.
+ * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDIO_FLAG_CMDACT: Command transfer in progress
+ * @arg SDIO_FLAG_TXACT: Data transmit in progress
+ * @arg SDIO_FLAG_RXACT: Data receive in progress
+ * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
+ * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
+ * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full
+ * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full
+ * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty
+ * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty
+ * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO
+ * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO
+ * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval The new state of SD FLAG (SET or RESET).
+ */
+#define __HAL_SD_SDIO_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__))
+
+/**
+ * @brief Clear the SD's pending flags.
+ * @param __HANDLE__: SD Handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDIO_FLAG_DTIMEOUT: Data timeout
+ * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
+ * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode
+ * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval None
+ */
+#define __HAL_SD_SDIO_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__))
+
+/**
+ * @brief Check whether the specified SD interrupt has occurred or not.
+ * @param __HANDLE__: SD Handle
+ * @param __INTERRUPT__: specifies the SDIO interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval The new state of SD IT (SET or RESET).
+ */
+#define __HAL_SD_SDIO_GET_IT (__HANDLE__, __INTERRUPT__) __SDIO_GET_IT ((__HANDLE__)->Instance, __INTERRUPT__)
+
+/**
+ * @brief Clear the SD's interrupt pending bits.
+ * @param __HANDLE__ : SD Handle
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIO_DCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval None
+ */
+#define __HAL_SD_SDIO_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SD_Exported_Functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions ********************************/
+/** @addtogroup SD_Group1
+ * @{
+ */
+HAL_SD_ErrorTypedef HAL_SD_Init(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *SDCardInfo);
+HAL_StatusTypeDef HAL_SD_DeInit (SD_HandleTypeDef *hsd);
+void HAL_SD_MspInit(SD_HandleTypeDef *hsd);
+void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd);
+/**
+ * @}
+ */
+
+/* I/O operation functions ***************************************************/
+/** @addtogroup SD_Group2
+ * @{
+ */
+/* Blocking mode: Polling */
+HAL_SD_ErrorTypedef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint64_t startaddr, uint64_t endaddr);
+
+/* Non-Blocking mode: Interrupt */
+void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd);
+
+/* Callback in non blocking modes (DMA) */
+void HAL_SD_DMA_RxCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_DMA_RxErrorCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_DMA_TxCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_DMA_TxErrorCallback(DMA_HandleTypeDef *hdma);
+void HAL_SD_XferCpltCallback(SD_HandleTypeDef *hsd);
+void HAL_SD_XferErrorCallback(SD_HandleTypeDef *hsd);
+
+/* Non-Blocking mode: DMA */
+HAL_SD_ErrorTypedef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks);
+HAL_SD_ErrorTypedef HAL_SD_CheckWriteOperation(SD_HandleTypeDef *hsd, uint32_t Timeout);
+HAL_SD_ErrorTypedef HAL_SD_CheckReadOperation(SD_HandleTypeDef *hsd, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/* Peripheral Control functions **********************************************/
+/** @addtogroup SD_Group3
+ * @{
+ */
+HAL_SD_ErrorTypedef HAL_SD_Get_CardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *pCardInfo);
+HAL_SD_ErrorTypedef HAL_SD_WideBusOperation_Config(SD_HandleTypeDef *hsd, uint32_t WideMode);
+HAL_SD_ErrorTypedef HAL_SD_StopTransfer(SD_HandleTypeDef *hsd);
+HAL_SD_ErrorTypedef HAL_SD_HighSpeed (SD_HandleTypeDef *hsd);
+/**
+ * @}
+ */
+
+/* Peripheral State functions ************************************************/
+/** @addtogroup SD_Group4
+ * @{
+ */
+HAL_SD_ErrorTypedef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus);
+HAL_SD_ErrorTypedef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypedef *pCardStatus);
+HAL_SD_TransferStateTypedef HAL_SD_GetStatus(SD_HandleTypeDef *hsd);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_SD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_sdram.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,151 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sdram.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of SDRAM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SDRAM_H
+#define __STM32F4xx_HAL_SDRAM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_fmc.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SDRAM
+ * @{
+ */
+
+/* Exported typedef ----------------------------------------------------------*/
+
+/**
+ * @brief HAL SDRAM State structure definition
+ */
+typedef enum
+{
+ HAL_SDRAM_STATE_RESET = 0x00, /*!< SDRAM not yet initialized or disabled */
+ HAL_SDRAM_STATE_READY = 0x01, /*!< SDRAM initialized and ready for use */
+ HAL_SDRAM_STATE_BUSY = 0x02, /*!< SDRAM internal process is ongoing */
+ HAL_SDRAM_STATE_ERROR = 0x03, /*!< SDRAM error state */
+ HAL_SDRAM_STATE_WRITE_PROTECTED = 0x04, /*!< SDRAM device write protected */
+ HAL_SDRAM_STATE_PRECHARGED = 0x05 /*!< SDRAM device precharged */
+
+}HAL_SDRAM_StateTypeDef;
+
+/**
+ * @brief SDRAM handle Structure definition
+ */
+typedef struct
+{
+ FMC_SDRAM_TypeDef *Instance; /*!< Register base address */
+
+ FMC_SDRAM_InitTypeDef Init; /*!< SDRAM device configuration parameters */
+
+ __IO HAL_SDRAM_StateTypeDef State; /*!< SDRAM access state */
+
+ HAL_LockTypeDef Lock; /*!< SDRAM locking object */
+
+ DMA_HandleTypeDef *hdma; /*!< Pointer DMA handler */
+
+}SDRAM_HandleTypeDef;
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset SDRAM handle state
+ * @param __HANDLE__: specifies the SDRAM handle.
+ * @retval None
+ */
+#define __HAL_SDRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SDRAM_STATE_RESET)
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SDRAM_Init(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_TimingTypeDef *Timing);
+HAL_StatusTypeDef HAL_SDRAM_DeInit(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram);
+
+void HAL_SDRAM_IRQHandler(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_RefreshErrorCallback(SDRAM_HandleTypeDef *hsdram);
+void HAL_SDRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SDRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma);
+
+/* I/O operation functions *****************************************************/
+HAL_StatusTypeDef HAL_SDRAM_Read_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Read_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Read_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+
+HAL_StatusTypeDef HAL_SDRAM_Read_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t * pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SDRAM_Write_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+
+/* SDRAM Control functions *****************************************************/
+HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Enable(SDRAM_HandleTypeDef *hsdram);
+HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Disable(SDRAM_HandleTypeDef *hsdram);
+HAL_StatusTypeDef HAL_SDRAM_SendCommand(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SDRAM_ProgramRefreshRate(SDRAM_HandleTypeDef *hsdram, uint32_t RefreshRate);
+HAL_StatusTypeDef HAL_SDRAM_SetAutoRefreshNumber(SDRAM_HandleTypeDef *hsdram, uint32_t AutoRefreshNumber);
+uint32_t HAL_SDRAM_GetModeStatus(SDRAM_HandleTypeDef *hsdram);
+
+/* SDRAM State functions ********************************************************/
+HAL_SDRAM_StateTypeDef HAL_SDRAM_GetState(SDRAM_HandleTypeDef *hsdram);
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SDRAM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_smartcard.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,493 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_smartcard.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of SMARTCARD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SMARTCARD_H
+#define __STM32F4xx_HAL_SMARTCARD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SMARTCARD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/**
+ * @brief SMARTCARD Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the SmartCard communication baud rate.
+ The baud rate is computed using the following formula:
+ - IntegerDivider = ((PCLKx) / (8 * (hirda->Init.BaudRate)))
+ - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref SMARTCARD_Word_Length */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref SMARTCARD_Stop_Bits */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref SMARTCARD_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits).*/
+
+ uint32_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref SMARTCARD_Mode */
+
+ uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
+ This parameter can be a value of @ref SMARTCARD_Clock_Polarity */
+
+ uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref SMARTCARD_Clock_Phase */
+
+ uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref SMARTCARD_Last_Bit */
+
+ uint32_t Prescaler; /*!< Specifies the SmartCard Prescaler.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t GuardTime; /*!< Specifies the SmartCard Guard Time.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t NACKState; /*!< Specifies the SmartCard NACK Transmission state.
+ This parameter can be a value of @ref SmartCard_NACK_State */
+}SMARTCARD_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_SMARTCARD_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */
+ HAL_SMARTCARD_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_SMARTCARD_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_SMARTCARD_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_SMARTCARD_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_SMARTCARD_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_SMARTCARD_STATE_ERROR = 0x04 /*!< Error */
+}HAL_SMARTCARD_StateTypeDef;
+
+/**
+ * @brief HAL SMARTCARD Error Code structure definition
+ */
+typedef enum
+{
+ HAL_SMARTCARD_ERROR_NONE = 0x00, /*!< No error */
+ HAL_SMARTCARD_ERROR_PE = 0x01, /*!< Parity error */
+ HAL_SMARTCARD_ERROR_NE = 0x02, /*!< Noise error */
+ HAL_SMARTCARD_ERROR_FE = 0x04, /*!< frame error */
+ HAL_SMARTCARD_ERROR_ORE = 0x08, /*!< Overrun error */
+ HAL_SMARTCARD_ERROR_DMA = 0x10 /*!< DMA transfer error */
+}HAL_SMARTCARD_ErrorTypeDef;
+
+/**
+ * @brief SMARTCARD handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /* USART registers base address */
+
+ SMARTCARD_InitTypeDef Init; /* SmartCard communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to SmartCard Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* SmartCard Tx Transfer size */
+
+ uint16_t TxXferCount; /* SmartCard Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to SmartCard Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* SmartCard Rx Transfer size */
+
+ uint16_t RxXferCount; /* SmartCard Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /* SmartCard Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* SmartCard Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ __IO HAL_SMARTCARD_StateTypeDef State; /* SmartCard communication state */
+
+ __IO HAL_SMARTCARD_ErrorTypeDef ErrorCode; /* SMARTCARD Error code */
+}SMARTCARD_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Constants
+ * @{
+ */
+
+/** @defgroup SMARTCARD_Word_Length
+ * @{
+ */
+#define SMARTCARD_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+#define IS_SMARTCARD_WORD_LENGTH(LENGTH) (((LENGTH) == SMARTCARD_WORDLENGTH_8B) || \
+ ((LENGTH) == SMARTCARD_WORDLENGTH_9B))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Stop_Bits
+ * @{
+ */
+#define SMARTCARD_STOPBITS_1 ((uint32_t)0x00000000)
+#define SMARTCARD_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0)
+#define SMARTCARD_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+#define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
+#define IS_SMARTCARD_STOPBITS(STOPBITS) (((STOPBITS) == SMARTCARD_STOPBITS_1) || \
+ ((STOPBITS) == SMARTCARD_STOPBITS_0_5) || \
+ ((STOPBITS) == SMARTCARD_STOPBITS_1_5) || \
+ ((STOPBITS) == SMARTCARD_STOPBITS_2))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Parity
+ * @{
+ */
+#define SMARTCARD_PARITY_NONE ((uint32_t)0x00000000)
+#define SMARTCARD_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define SMARTCARD_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+#define IS_SMARTCARD_PARITY(PARITY) (((PARITY) == SMARTCARD_PARITY_NONE) || \
+ ((PARITY) == SMARTCARD_PARITY_EVEN) || \
+ ((PARITY) == SMARTCARD_PARITY_ODD))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Mode
+ * @{
+ */
+#define SMARTCARD_MODE_RX ((uint32_t)USART_CR1_RE)
+#define SMARTCARD_MODE_TX ((uint32_t)USART_CR1_TE)
+#define SMARTCARD_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_SMARTCARD_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3) == 0x00) && ((MODE) != (uint32_t)0x000000))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Clock_Polarity
+ * @{
+ */
+#define SMARTCARD_POLARITY_LOW ((uint32_t)0x00000000)
+#define SMARTCARD_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL)
+#define IS_SMARTCARD_POLARITY(CPOL) (((CPOL) == SMARTCARD_POLARITY_LOW) || ((CPOL) == SMARTCARD_POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Clock_Phase
+ * @{
+ */
+#define SMARTCARD_PHASE_1EDGE ((uint32_t)0x00000000)
+#define SMARTCARD_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA)
+#define IS_SMARTCARD_PHASE(CPHA) (((CPHA) == SMARTCARD_PHASE_1EDGE) || ((CPHA) == SMARTCARD_PHASE_2EDGE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Last_Bit
+ * @{
+ */
+#define SMARTCARD_LASTBIT_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL)
+#define IS_SMARTCARD_LASTBIT(LASTBIT) (((LASTBIT) == SMARTCARD_LASTBIT_DISABLE) || \
+ ((LASTBIT) == SMARTCARD_LASTBIT_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SmartCard_NACK_State
+ * @{
+ */
+#define SMARTCARD_NACK_ENABLED ((uint32_t)USART_CR3_NACK)
+#define SMARTCARD_NACK_DISABLED ((uint32_t)0x00000000)
+#define IS_SMARTCARD_NACK_STATE(NACK) (((NACK) == SMARTCARD_NACK_ENABLED) || \
+ ((NACK) == SMARTCARD_NACK_DISABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SmartCard_DMA_Requests
+ * @{
+ */
+
+#define SMARTCARD_DMAREQ_TX ((uint32_t)USART_CR3_DMAT)
+#define SMARTCARD_DMAREQ_RX ((uint32_t)USART_CR3_DMAR)
+
+/**
+ * @}
+ */
+
+/** @defgroup SmartCard_Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the SR register
+ * @{
+ */
+
+#define SMARTCARD_FLAG_TXE ((uint32_t)0x00000080)
+#define SMARTCARD_FLAG_TC ((uint32_t)0x00000040)
+#define SMARTCARD_FLAG_RXNE ((uint32_t)0x00000020)
+#define SMARTCARD_FLAG_IDLE ((uint32_t)0x00000010)
+#define SMARTCARD_FLAG_ORE ((uint32_t)0x00000008)
+#define SMARTCARD_FLAG_NE ((uint32_t)0x00000004)
+#define SMARTCARD_FLAG_FE ((uint32_t)0x00000002)
+#define SMARTCARD_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup SmartCard_Interrupt_definition
+ * Elements values convention: 0xY000XXXX
+ * - XXXX : Interrupt mask in the XX register
+ * - Y : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR3 register
+
+ *
+ * @{
+ */
+#define SMARTCARD_IT_PE ((uint32_t)0x10000100)
+#define SMARTCARD_IT_TXE ((uint32_t)0x10000080)
+#define SMARTCARD_IT_TC ((uint32_t)0x10000040)
+#define SMARTCARD_IT_RXNE ((uint32_t)0x10000020)
+#define SMARTCARD_IT_IDLE ((uint32_t)0x10000010)
+#define SMARTCARD_IT_ERR ((uint32_t)0x20000001)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset SMARTCARD handle state
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMARTCARD_STATE_RESET)
+
+/** @brief Flushs the Smartcard DR register
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ */
+#define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
+
+/** @brief Checks whether the specified Smartcard flag is set or not.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_FLAG_TXE: Transmit data register empty flag
+ * @arg SMARTCARD_FLAG_TC: Transmission Complete flag
+ * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag
+ * @arg SMARTCARD_FLAG_IDLE: Idle Line detection flag
+ * @arg SMARTCARD_FLAG_ORE: OverRun Error flag
+ * @arg SMARTCARD_FLAG_NE: Noise Error flag
+ * @arg SMARTCARD_FLAG_FE: Framing Error flag
+ * @arg SMARTCARD_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified Smartcard pending flags.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg SMARTCARD_FLAG_TC: Transmission Complete flag.
+ * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag.
+ *
+ * @note PE (Parity error), FE (Framing error), NE (Noise error) and ORE (OverRun
+ * error) flags are cleared by software sequence: a read operation to
+ * USART_SR register followed by a read operation to USART_DR register.
+ * @note RXNE flag can be also cleared by a read to the USART_DR register.
+ * @note TC flag can be also cleared by software sequence: a read operation to
+ * USART_SR register followed by a write operation to USART_DR register.
+ * @note TXE flag is cleared only by a write to the USART_DR register.
+ */
+#define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief Clear the SMARTCARD PE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) do{(__HANDLE__)->Instance->SR;\
+ (__HANDLE__)->Instance->DR;}while(0)
+/** @brief Clear the SMARTCARD FE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the SMARTCARD NE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the SMARTCARD ORE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the SMARTCARD IDLE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+
+/** @brief Enables or disables the specified SmartCard interrupts.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @param __INTERRUPT__: specifies the SMARTCARD interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ */
+#define SMARTCARD_IT_MASK ((uint32_t)0x0000FFFF)
+#define __SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK)))
+#define __SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & SMARTCARD_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & SMARTCARD_IT_MASK)))
+
+/** @brief Checks whether the specified SmartCard interrupt has occurred or not.
+ * @param __HANDLE__: specifies the SmartCard Handle.
+ * @param __IT__: specifies the SMARTCARD interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt
+ * @arg SMARTCARD_IT_ERR: Error interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == 1)? (__HANDLE__)->Instance->CR1: (__HANDLE__)->Instance->CR3) & (((uint32_t)(__IT__)) & SMARTCARD_IT_MASK))
+
+/** @brief Macros to enable or disable the SmartCard interface.
+ * @param __HANDLE__: specifies the SmartCard Handle.
+ */
+#define __SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+#define __SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/** @brief Macros to enable or disable the SmartCard DMA request.
+ * @param __HANDLE__: specifies the SmartCard Handle.
+ * @param __REQUEST__: specifies the SmartCard DMA request.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_DMAREQ_TX: SmartCard DMA transmit request
+ * @arg SMARTCARD_DMAREQ_RX: SmartCard DMA receive request
+ */
+#define __SMARTCARD_DMA_REQUEST_ENABLE(__HANDLE__, __REQUEST__) ((__HANDLE__)->Instance->CR3 |= (__REQUEST__))
+#define __SMARTCARD_DMA_REQUEST_DISABLE(__HANDLE__, __REQUEST__) ((__HANDLE__)->Instance->CR3 &= ~(__REQUEST__))
+
+#define __DIV(_PCLK_, _BAUD_) (((_PCLK_)*25)/(4*(_BAUD_)))
+#define __DIVMANT(_PCLK_, _BAUD_) (__DIV((_PCLK_), (_BAUD_))/100)
+#define __DIVFRAQ(_PCLK_, _BAUD_) (((__DIV((_PCLK_), (_BAUD_)) - (__DIVMANT((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100)
+#define __SMARTCARD_BRR(_PCLK_, _BAUD_) ((__DIVMANT((_PCLK_), (_BAUD_)) << 4)|(__DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0F))
+
+#define IS_SMARTCARD_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001)
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsc);
+HAL_StatusTypeDef HAL_SMARTCARD_ReInit(SMARTCARD_HandleTypeDef *hsc);
+HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsc);
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsc);
+
+/* Peripheral State functions **************************************************/
+HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsc);
+uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsc);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SMARTCARD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_spi.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,488 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_spi.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of SPI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SPI_H
+#define __STM32F4xx_HAL_SPI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SPI
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief SPI Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Specifies the SPI operating mode.
+ This parameter can be a value of @ref SPI_mode */
+
+ uint32_t Direction; /*!< Specifies the SPI Directional mode state.
+ This parameter can be a value of @ref SPI_Direction_mode */
+
+ uint32_t DataSize; /*!< Specifies the SPI data size.
+ This parameter can be a value of @ref SPI_data_size */
+
+ uint32_t CLKPolarity; /*!< Specifies the serial clock steady state.
+ This parameter can be a value of @ref SPI_Clock_Polarity */
+
+ uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture.
+ This parameter can be a value of @ref SPI_Clock_Phase */
+
+ uint32_t NSS; /*!< Specifies whether the NSS signal is managed by
+ hardware (NSS pin) or by software using the SSI bit.
+ This parameter can be a value of @ref SPI_Slave_Select_management */
+
+ uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be
+ used to configure the transmit and receive SCK clock.
+ This parameter can be a value of @ref SPI_BaudRate_Prescaler
+ @note The communication clock is derived from the master
+ clock. The slave clock does not need to be set */
+
+ uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
+ This parameter can be a value of @ref SPI_MSB_LSB_transmission */
+
+ uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not.
+ This parameter can be a value of @ref SPI_TI_mode */
+
+ uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not.
+ This parameter can be a value of @ref SPI_CRC_Calculation */
+
+ uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 65535 */
+
+}SPI_InitTypeDef;
+
+/**
+ * @brief HAL SPI State structure definition
+ */
+typedef enum
+{
+ HAL_SPI_STATE_RESET = 0x00, /*!< SPI not yet initialized or disabled */
+ HAL_SPI_STATE_READY = 0x01, /*!< SPI initialized and ready for use */
+ HAL_SPI_STATE_BUSY = 0x02, /*!< SPI process is ongoing */
+ HAL_SPI_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_SPI_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_SPI_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_SPI_STATE_ERROR = 0x03 /*!< SPI error state */
+
+}HAL_SPI_StateTypeDef;
+
+/**
+ * @brief HAL SPI Error Code structure definition
+ */
+typedef enum
+{
+ HAL_SPI_ERROR_NONE = 0x00, /*!< No error */
+ HAL_SPI_ERROR_MODF = 0x01, /*!< MODF error */
+ HAL_SPI_ERROR_CRC = 0x02, /*!< CRC error */
+ HAL_SPI_ERROR_OVR = 0x04, /*!< OVR error */
+ HAL_SPI_ERROR_FRE = 0x08, /*!< FRE error */
+ HAL_SPI_ERROR_DMA = 0x10, /*!< DMA transfer error */
+ HAL_SPI_ERROR_FLAG = 0x20 /*!< Flag: RXNE,TXE, BSY */
+
+}HAL_SPI_ErrorTypeDef;
+
+/**
+ * @brief SPI handle Structure definition
+ */
+typedef struct __SPI_HandleTypeDef
+{
+ SPI_TypeDef *Instance; /* SPI registers base address */
+
+ SPI_InitTypeDef Init; /* SPI communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to SPI Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* SPI Tx transfer size */
+
+ uint16_t TxXferCount; /* SPI Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to SPI Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* SPI Rx transfer size */
+
+ uint16_t RxXferCount; /* SPI Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /* SPI Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* SPI Rx DMA handle parameters */
+
+ void (*RxISR)(struct __SPI_HandleTypeDef * hspi); /* function pointer on Rx ISR */
+
+ void (*TxISR)(struct __SPI_HandleTypeDef * hspi); /* function pointer on Tx ISR */
+
+ HAL_LockTypeDef Lock; /* SPI locking object */
+
+ __IO HAL_SPI_StateTypeDef State; /* SPI communication state */
+
+ __IO HAL_SPI_ErrorTypeDef ErrorCode; /* SPI Error code */
+
+}SPI_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup SPI_Exported_Constants
+ * @{
+ */
+
+/** @defgroup SPI_mode
+ * @{
+ */
+#define SPI_MODE_SLAVE ((uint32_t)0x00000000)
+#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI)
+
+#define IS_SPI_MODE(MODE) (((MODE) == SPI_MODE_SLAVE) || \
+ ((MODE) == SPI_MODE_MASTER))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Direction_mode
+ * @{
+ */
+#define SPI_DIRECTION_2LINES ((uint32_t)0x00000000)
+#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY
+#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE
+
+#define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \
+ ((MODE) == SPI_DIRECTION_2LINES_RXONLY) || \
+ ((MODE) == SPI_DIRECTION_1LINE))
+
+#define IS_SPI_DIRECTION_2LINES_OR_1LINE(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \
+ ((MODE) == SPI_DIRECTION_1LINE))
+
+#define IS_SPI_DIRECTION_2LINES(MODE) ((MODE) == SPI_DIRECTION_2LINES)
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_data_size
+ * @{
+ */
+#define SPI_DATASIZE_8BIT ((uint32_t)0x00000000)
+#define SPI_DATASIZE_16BIT SPI_CR1_DFF
+
+#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DATASIZE_16BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_8BIT))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Polarity
+ * @{
+ */
+#define SPI_POLARITY_LOW ((uint32_t)0x00000000)
+#define SPI_POLARITY_HIGH SPI_CR1_CPOL
+
+#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_POLARITY_LOW) || \
+ ((CPOL) == SPI_POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Phase
+ * @{
+ */
+#define SPI_PHASE_1EDGE ((uint32_t)0x00000000)
+#define SPI_PHASE_2EDGE SPI_CR1_CPHA
+
+#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_PHASE_1EDGE) || \
+ ((CPHA) == SPI_PHASE_2EDGE))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Slave_Select_management
+ * @{
+ */
+#define SPI_NSS_SOFT SPI_CR1_SSM
+#define SPI_NSS_HARD_INPUT ((uint32_t)0x00000000)
+#define SPI_NSS_HARD_OUTPUT ((uint32_t)0x00040000)
+
+#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_SOFT) || \
+ ((NSS) == SPI_NSS_HARD_INPUT) || \
+ ((NSS) == SPI_NSS_HARD_OUTPUT))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_BaudRate_Prescaler
+ * @{
+ */
+#define SPI_BAUDRATEPRESCALER_2 ((uint32_t)0x00000000)
+#define SPI_BAUDRATEPRESCALER_4 ((uint32_t)0x00000008)
+#define SPI_BAUDRATEPRESCALER_8 ((uint32_t)0x00000010)
+#define SPI_BAUDRATEPRESCALER_16 ((uint32_t)0x00000018)
+#define SPI_BAUDRATEPRESCALER_32 ((uint32_t)0x00000020)
+#define SPI_BAUDRATEPRESCALER_64 ((uint32_t)0x00000028)
+#define SPI_BAUDRATEPRESCALER_128 ((uint32_t)0x00000030)
+#define SPI_BAUDRATEPRESCALER_256 ((uint32_t)0x00000038)
+
+#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BAUDRATEPRESCALER_2) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_4) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_8) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_16) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_32) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_64) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_128) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_256))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_MSB_LSB_transmission
+ * @{
+ */
+#define SPI_FIRSTBIT_MSB ((uint32_t)0x00000000)
+#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST
+
+#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FIRSTBIT_MSB) || \
+ ((BIT) == SPI_FIRSTBIT_LSB))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_TI_mode
+ * @{
+ */
+#define SPI_TIMODE_DISABLED ((uint32_t)0x00000000)
+#define SPI_TIMODE_ENABLED SPI_CR2_FRF
+
+#define IS_SPI_TIMODE(MODE) (((MODE) == SPI_TIMODE_DISABLED) || \
+ ((MODE) == SPI_TIMODE_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_CRC_Calculation
+ * @{
+ */
+#define SPI_CRCCALCULATION_DISABLED ((uint32_t)0x00000000)
+#define SPI_CRCCALCULATION_ENABLED SPI_CR1_CRCEN
+
+#define IS_SPI_CRC_CALCULATION(CALCULATION) (((CALCULATION) == SPI_CRCCALCULATION_DISABLED) || \
+ ((CALCULATION) == SPI_CRCCALCULATION_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Interrupt_configuration_definition
+ * @{
+ */
+#define SPI_IT_TXE SPI_CR2_TXEIE
+#define SPI_IT_RXNE SPI_CR2_RXNEIE
+#define SPI_IT_ERR SPI_CR2_ERRIE
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Flag_definition
+ * @{
+ */
+#define SPI_FLAG_RXNE SPI_SR_RXNE
+#define SPI_FLAG_TXE SPI_SR_TXE
+#define SPI_FLAG_CRCERR SPI_SR_CRCERR
+#define SPI_FLAG_MODF SPI_SR_MODF
+#define SPI_FLAG_OVR SPI_SR_OVR
+#define SPI_FLAG_BSY SPI_SR_BSY
+#define SPI_FLAG_FRE SPI_SR_FRE
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset SPI handle state
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
+
+/** @brief Enable or disable the specified SPI interrupts.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__)))
+
+/** @brief Check if the specified SPI interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __INTERRUPT__: specifies the SPI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Check whether the specified SPI flag is set or not.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_FLAG_RXNE: Receive buffer not empty flag
+ * @arg SPI_FLAG_TXE: Transmit buffer empty flag
+ * @arg SPI_FLAG_CRCERR: CRC error flag
+ * @arg SPI_FLAG_MODF: Mode fault flag
+ * @arg SPI_FLAG_OVR: Overrun flag
+ * @arg SPI_FLAG_BSY: Busy flag
+ * @arg SPI_FLAG_FRE: Frame format error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the SPI CRCERR pending flag.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = ~(SPI_FLAG_CRCERR))
+
+/** @brief Clear the SPI MODF pending flag.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) do{(__HANDLE__)->Instance->SR;\
+ (__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE);}while(0)
+
+/** @brief Clear the SPI OVR pending flag.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) do{(__HANDLE__)->Instance->DR;\
+ (__HANDLE__)->Instance->SR;}while(0)
+
+/** @brief Clear the SPI FRE pending flag.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR)
+
+#define __HAL_SPI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_SPE)
+#define __HAL_SPI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~SPI_CR1_SPE)
+
+#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) (((POLYNOMIAL) >= 0x1) && ((POLYNOMIAL) <= 0xFFFF))
+
+#define __HAL_SPI_1LINE_TX(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_BIDIOE)
+
+#define __HAL_SPI_1LINE_RX(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~SPI_CR1_BIDIOE)
+
+#define __HAL_SPI_RESET_CRC(__HANDLE__) do{(__HANDLE__)->Instance->CR1 &= (~SPI_CR1_CRCEN);\
+ (__HANDLE__)->Instance->CR1 |= SPI_CR1_CRCEN;}while(0)
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DeInit (SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi);
+
+/* I/O operation functions *****************************************************/
+HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi);
+
+void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+
+/* Peripheral State and Control functions **************************************/
+HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi);
+HAL_SPI_ErrorTypeDef HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SPI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_sram.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,152 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_sram.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of SRAM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_SRAM_H
+#define __STM32F4xx_HAL_SRAM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+ #include "stm32f4xx_ll_fsmc.h"
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+ #include "stm32f4xx_ll_fmc.h"
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SRAM
+ * @{
+ */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/* Exported typedef ----------------------------------------------------------*/
+
+/**
+ * @brief HAL SRAM State structures definition
+ */
+typedef enum
+{
+ HAL_SRAM_STATE_RESET = 0x00, /*!< SRAM not yet initialized or disabled */
+ HAL_SRAM_STATE_READY = 0x01, /*!< SRAM initialized and ready for use */
+ HAL_SRAM_STATE_BUSY = 0x02, /*!< SRAM internal process is ongoing */
+ HAL_SRAM_STATE_ERROR = 0x03, /*!< SRAM error state */
+ HAL_SRAM_STATE_PROTECTED = 0x04 /*!< SRAM peripheral NORSRAM device write protected */
+
+}HAL_SRAM_StateTypeDef;
+
+/**
+ * @brief SRAM handle Structure definition
+ */
+typedef struct
+{
+ FMC_NORSRAM_TypeDef *Instance; /*!< Register base address */
+
+ FMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */
+
+ FMC_NORSRAM_InitTypeDef Init; /*!< SRAM device control configuration parameters */
+
+ HAL_LockTypeDef Lock; /*!< SRAM locking object */
+
+ __IO HAL_SRAM_StateTypeDef State; /*!< SRAM device access state */
+
+ DMA_HandleTypeDef *hdma; /*!< Pointer DMA handler */
+
+}SRAM_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset SRAM handle state
+ * @param __HANDLE__: SRAM handle
+ * @retval None
+ */
+#define __HAL_SRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SRAM_STATE_RESET)
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming);
+HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram);
+void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram);
+void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram);
+
+/* I/O operation functions *****************************************************/
+HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+
+void HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma);
+
+/* SRAM Control functions ******************************************************/
+HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram);
+HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram);
+
+/* SRAM State functions *********************************************************/
+HAL_SRAM_StateTypeDef HAL_SRAM_GetState(SRAM_HandleTypeDef *hsram);
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_SRAM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_tim.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1487 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_tim.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of TIM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_TIM_H
+#define __STM32F4xx_HAL_TIM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL
+ * @{
+ */
+
+/** @addtogroup TIM
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief TIM Time base Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t CounterMode; /*!< Specifies the counter mode.
+ This parameter can be a value of @ref TIM_Counter_Mode */
+
+ uint32_t Period; /*!< Specifies the period value to be loaded into the active
+ Auto-Reload Register at the next update event.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t ClockDivision; /*!< Specifies the clock division.
+ This parameter can be a value of @ref TIM_ClockDivision */
+
+ uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter
+ reaches zero, an update event is generated and counting restarts
+ from the RCR value (N).
+ This means in PWM mode that (N+1) corresponds to:
+ - the number of PWM periods in edge-aligned mode
+ - the number of half PWM period in center-aligned mode
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_Base_InitTypeDef;
+
+/**
+ * @brief TIM Output Compare Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCFastMode; /*!< Specifies the Fast mode state.
+ This parameter can be a value of @ref TIM_Output_Fast_State
+ @note This parameter is valid only in PWM1 and PWM2 mode. */
+
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_OC_InitTypeDef;
+
+/**
+ * @brief TIM One Pulse Mode Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_OnePulse_InitTypeDef;
+
+
+/**
+ * @brief TIM Input Capture Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_IC_InitTypeDef;
+
+/**
+ * @brief TIM Encoder Configuration Structure definition
+ */
+
+typedef struct
+{
+ uint32_t EncoderMode; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Encoder_Mode */
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+ uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC2Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC2Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_Encoder_InitTypeDef;
+
+/**
+ * @brief Clock Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockSource; /*!< TIM clock sources.
+ This parameter can be a value of @ref TIM_Clock_Source */
+ uint32_t ClockPolarity; /*!< TIM clock polarity.
+ This parameter can be a value of @ref TIM_Clock_Polarity */
+ uint32_t ClockPrescaler; /*!< TIM clock prescaler.
+ This parameter can be a value of @ref TIM_Clock_Prescaler */
+ uint32_t ClockFilter; /*!< TIM clock filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+}TIM_ClockConfigTypeDef;
+
+/**
+ * @brief Clear Input Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClearInputState; /*!< TIM clear Input state.
+ This parameter can be ENABLE or DISABLE */
+ uint32_t ClearInputSource; /*!< TIM clear Input sources.
+ This parameter can be a value of @ref TIM_ClearInput_Source */
+ uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity.
+ This parameter can be a value of @ref TIM_ClearInput_Polarity */
+ uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler.
+ This parameter can be a value of @ref TIM_ClearInput_Prescaler */
+ uint32_t ClearInputFilter; /*!< TIM Clear Input filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+}TIM_ClearInputConfigTypeDef;
+
+/**
+ * @brief TIM Slave configuration Structure definition
+ */
+typedef struct {
+ uint32_t SlaveMode; /*!< Slave mode selection
+ This parameter can be a value of @ref TIM_Slave_Mode */
+ uint32_t InputTrigger; /*!< Input Trigger source
+ This parameter can be a value of @ref TIM_Trigger_Selection */
+ uint32_t TriggerPolarity; /*!< Input Trigger polarity
+ This parameter can be a value of @ref TIM_Trigger_Polarity */
+ uint32_t TriggerPrescaler; /*!< Input trigger prescaler
+ This parameter can be a value of @ref TIM_Trigger_Prescaler */
+ uint32_t TriggerFilter; /*!< Input trigger filter
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+}TIM_SlaveConfigTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_TIM_STATE_RESET = 0x00, /*!< Peripheral not yet initialized or disabled */
+ HAL_TIM_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_TIM_STATE_BUSY = 0x02, /*!< An internal process is ongoing */
+ HAL_TIM_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_TIM_STATE_ERROR = 0x04 /*!< Reception process is ongoing */
+}HAL_TIM_StateTypeDef;
+
+/**
+ * @brief HAL Active channel structures definition
+ */
+typedef enum
+{
+ HAL_TIM_ACTIVE_CHANNEL_1 = 0x01, /*!< The active channel is 1 */
+ HAL_TIM_ACTIVE_CHANNEL_2 = 0x02, /*!< The active channel is 2 */
+ HAL_TIM_ACTIVE_CHANNEL_3 = 0x04, /*!< The active channel is 3 */
+ HAL_TIM_ACTIVE_CHANNEL_4 = 0x08, /*!< The active channel is 4 */
+ HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00 /*!< All active channels cleared */
+}HAL_TIM_ActiveChannel;
+
+/**
+ * @brief TIM Time Base Handle Structure definition
+ */
+typedef struct
+{
+ TIM_TypeDef *Instance; /*!< Register base address */
+ TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */
+ HAL_TIM_ActiveChannel Channel; /*!< Active channel */
+ DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array
+ This array is accessed by a @ref DMA_Handle_index */
+ HAL_LockTypeDef Lock; /*!< Locking object */
+ __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */
+}TIM_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIM_Exported_Constants
+ * @{
+ */
+
+/** @defgroup TIM_Input_Channel_Polarity
+ * @{
+ */
+#define TIM_INPUTCHANNELPOLARITY_RISING ((uint32_t)0x00000000) /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_FALLING (TIM_CCER_CC1P) /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Polarity
+ * @{
+ */
+#define TIM_ETRPOLARITY_INVERTED (TIM_SMCR_ETP) /*!< Polarity for ETR source */
+#define TIM_ETRPOLARITY_NONINVERTED ((uint32_t)0x0000) /*!< Polarity for ETR source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Prescaler
+ * @{
+ */
+#define TIM_ETRPRESCALER_DIV1 ((uint32_t)0x0000) /*!< No prescaler is used */
+#define TIM_ETRPRESCALER_DIV2 (TIM_SMCR_ETPS_0) /*!< ETR input source is divided by 2 */
+#define TIM_ETRPRESCALER_DIV4 (TIM_SMCR_ETPS_1) /*!< ETR input source is divided by 4 */
+#define TIM_ETRPRESCALER_DIV8 (TIM_SMCR_ETPS) /*!< ETR input source is divided by 8 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Counter_Mode
+ * @{
+ */
+#define TIM_COUNTERMODE_UP ((uint32_t)0x0000)
+#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR
+#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0
+#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1
+#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS
+
+#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_COUNTERMODE_UP) || \
+ ((MODE) == TIM_COUNTERMODE_DOWN) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED1) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED2) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED3))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClockDivision
+ * @{
+ */
+#define TIM_CLOCKDIVISION_DIV1 ((uint32_t)0x0000)
+#define TIM_CLOCKDIVISION_DIV2 (TIM_CR1_CKD_0)
+#define TIM_CLOCKDIVISION_DIV4 (TIM_CR1_CKD_1)
+
+#define IS_TIM_CLOCKDIVISION_DIV(DIV) (((DIV) == TIM_CLOCKDIVISION_DIV1) || \
+ ((DIV) == TIM_CLOCKDIVISION_DIV2) || \
+ ((DIV) == TIM_CLOCKDIVISION_DIV4))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_and_PWM_modes
+ * @{
+ */
+#define TIM_OCMODE_TIMING ((uint32_t)0x0000)
+#define TIM_OCMODE_ACTIVE (TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_INACTIVE (TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M)
+#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_FORCED_INACTIVE (TIM_CCMR1_OC1M_2)
+
+#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \
+ ((MODE) == TIM_OCMODE_PWM2))
+
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING) || \
+ ((MODE) == TIM_OCMODE_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_INACTIVE) || \
+ ((MODE) == TIM_OCMODE_TOGGLE) || \
+ ((MODE) == TIM_OCMODE_FORCED_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_FORCED_INACTIVE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_State
+ * @{
+ */
+#define TIM_OUTPUTSTATE_DISABLE ((uint32_t)0x0000)
+#define TIM_OUTPUTSTATE_ENABLE (TIM_CCER_CC1E)
+
+#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OUTPUTSTATE_DISABLE) || \
+ ((STATE) == TIM_OUTPUTSTATE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Fast_State
+ * @{
+ */
+#define TIM_OCFAST_DISABLE ((uint32_t)0x0000)
+#define TIM_OCFAST_ENABLE (TIM_CCMR1_OC1FE)
+
+#define IS_TIM_FAST_STATE(STATE) (((STATE) == TIM_OCFAST_DISABLE) || \
+ ((STATE) == TIM_OCFAST_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_State
+ * @{
+ */
+#define TIM_OUTPUTNSTATE_DISABLE ((uint32_t)0x0000)
+#define TIM_OUTPUTNSTATE_ENABLE (TIM_CCER_CC1NE)
+
+#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OUTPUTNSTATE_DISABLE) || \
+ ((STATE) == TIM_OUTPUTNSTATE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Polarity
+ * @{
+ */
+#define TIM_OCPOLARITY_HIGH ((uint32_t)0x0000)
+#define TIM_OCPOLARITY_LOW (TIM_CCER_CC1P)
+
+#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPOLARITY_HIGH) || \
+ ((POLARITY) == TIM_OCPOLARITY_LOW))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Polarity
+ * @{
+ */
+#define TIM_OCNPOLARITY_HIGH ((uint32_t)0x0000)
+#define TIM_OCNPOLARITY_LOW (TIM_CCER_CC1NP)
+
+#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPOLARITY_HIGH) || \
+ ((POLARITY) == TIM_OCNPOLARITY_LOW))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Idle_State
+ * @{
+ */
+#define TIM_OCIDLESTATE_SET (TIM_CR2_OIS1)
+#define TIM_OCIDLESTATE_RESET ((uint32_t)0x0000)
+#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIDLESTATE_SET) || \
+ ((STATE) == TIM_OCIDLESTATE_RESET))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Idle_State
+ * @{
+ */
+#define TIM_OCNIDLESTATE_SET (TIM_CR2_OIS1N)
+#define TIM_OCNIDLESTATE_RESET ((uint32_t)0x0000)
+#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIDLESTATE_SET) || \
+ ((STATE) == TIM_OCNIDLESTATE_RESET))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Channel
+ * @{
+ */
+#define TIM_CHANNEL_1 ((uint32_t)0x0000)
+#define TIM_CHANNEL_2 ((uint32_t)0x0004)
+#define TIM_CHANNEL_3 ((uint32_t)0x0008)
+#define TIM_CHANNEL_4 ((uint32_t)0x000C)
+#define TIM_CHANNEL_ALL ((uint32_t)0x0018)
+
+#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4) || \
+ ((CHANNEL) == TIM_CHANNEL_ALL))
+
+#define IS_TIM_PWMI_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Polarity
+ * @{
+ */
+#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING
+#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING
+#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE
+
+#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPOLARITY_RISING) || \
+ ((POLARITY) == TIM_ICPOLARITY_FALLING) || \
+ ((POLARITY) == TIM_ICPOLARITY_BOTHEDGE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Selection
+ * @{
+ */
+#define TIM_ICSELECTION_DIRECTTI (TIM_CCMR1_CC1S_0) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC1, IC2, IC3 or IC4, respectively */
+#define TIM_ICSELECTION_INDIRECTTI (TIM_CCMR1_CC1S_1) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC2, IC1, IC4 or IC3, respectively */
+#define TIM_ICSELECTION_TRC (TIM_CCMR1_CC1S) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */
+
+#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSELECTION_DIRECTTI) || \
+ ((SELECTION) == TIM_ICSELECTION_INDIRECTTI) || \
+ ((SELECTION) == TIM_ICSELECTION_TRC))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Prescaler
+ * @{
+ */
+#define TIM_ICPSC_DIV1 ((uint32_t)0x0000) /*!< Capture performed each time an edge is detected on the capture input */
+#define TIM_ICPSC_DIV2 (TIM_CCMR1_IC1PSC_0) /*!< Capture performed once every 2 events */
+#define TIM_ICPSC_DIV4 (TIM_CCMR1_IC1PSC_1) /*!< Capture performed once every 4 events */
+#define TIM_ICPSC_DIV8 (TIM_CCMR1_IC1PSC) /*!< Capture performed once every 8 events */
+
+#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \
+ ((PRESCALER) == TIM_ICPSC_DIV2) || \
+ ((PRESCALER) == TIM_ICPSC_DIV4) || \
+ ((PRESCALER) == TIM_ICPSC_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_One_Pulse_Mode
+ * @{
+ */
+#define TIM_OPMODE_SINGLE (TIM_CR1_OPM)
+#define TIM_OPMODE_REPETITIVE ((uint32_t)0x0000)
+#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMODE_SINGLE) || \
+ ((MODE) == TIM_OPMODE_REPETITIVE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Encoder_Mode
+ * @{
+ */
+#define TIM_ENCODERMODE_TI1 (TIM_SMCR_SMS_0)
+#define TIM_ENCODERMODE_TI2 (TIM_SMCR_SMS_1)
+#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0)
+#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_ENCODERMODE_TI1) || \
+ ((MODE) == TIM_ENCODERMODE_TI2) || \
+ ((MODE) == TIM_ENCODERMODE_TI12))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Interrupt_definition
+ * @{
+ */
+#define TIM_IT_UPDATE (TIM_DIER_UIE)
+#define TIM_IT_CC1 (TIM_DIER_CC1IE)
+#define TIM_IT_CC2 (TIM_DIER_CC2IE)
+#define TIM_IT_CC3 (TIM_DIER_CC3IE)
+#define TIM_IT_CC4 (TIM_DIER_CC4IE)
+#define TIM_IT_COM (TIM_DIER_COMIE)
+#define TIM_IT_TRIGGER (TIM_DIER_TIE)
+#define TIM_IT_BREAK (TIM_DIER_BIE)
+
+#define IS_TIM_IT(IT) ((((IT) & 0xFFFFFF00) == 0x00000000) && ((IT) != 0x00000000))
+
+#define IS_TIM_GET_IT(IT) (((IT) == TIM_IT_UPDATE) || \
+ ((IT) == TIM_IT_CC1) || \
+ ((IT) == TIM_IT_CC2) || \
+ ((IT) == TIM_IT_CC3) || \
+ ((IT) == TIM_IT_CC4) || \
+ ((IT) == TIM_IT_COM) || \
+ ((IT) == TIM_IT_TRIGGER) || \
+ ((IT) == TIM_IT_BREAK))
+/**
+ * @}
+ */
+#define TIM_COMMUTATION_TRGI (TIM_CR2_CCUS)
+#define TIM_COMMUTATION_SOFTWARE ((uint32_t)0x0000)
+
+/** @defgroup TIM_DMA_sources
+ * @{
+ */
+#define TIM_DMA_UPDATE (TIM_DIER_UDE)
+#define TIM_DMA_CC1 (TIM_DIER_CC1DE)
+#define TIM_DMA_CC2 (TIM_DIER_CC2DE)
+#define TIM_DMA_CC3 (TIM_DIER_CC3DE)
+#define TIM_DMA_CC4 (TIM_DIER_CC4DE)
+#define TIM_DMA_COM (TIM_DIER_COMDE)
+#define TIM_DMA_TRIGGER (TIM_DIER_TDE)
+#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & 0xFFFF80FF) == 0x00000000) && ((SOURCE) != 0x00000000))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Event_Source
+ * @{
+ */
+#define TIM_EventSource_Update TIM_EGR_UG
+#define TIM_EventSource_CC1 TIM_EGR_CC1G
+#define TIM_EventSource_CC2 TIM_EGR_CC2G
+#define TIM_EventSource_CC3 TIM_EGR_CC3G
+#define TIM_EventSource_CC4 TIM_EGR_CC4G
+#define TIM_EventSource_COM TIM_EGR_COMG
+#define TIM_EventSource_Trigger TIM_EGR_TG
+#define TIM_EventSource_Break TIM_EGR_BG
+#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & 0xFFFFFF00) == 0x00000000) && ((SOURCE) != 0x00000000))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Flag_definition
+ * @{
+ */
+#define TIM_FLAG_UPDATE (TIM_SR_UIF)
+#define TIM_FLAG_CC1 (TIM_SR_CC1IF)
+#define TIM_FLAG_CC2 (TIM_SR_CC2IF)
+#define TIM_FLAG_CC3 (TIM_SR_CC3IF)
+#define TIM_FLAG_CC4 (TIM_SR_CC4IF)
+#define TIM_FLAG_COM (TIM_SR_COMIF)
+#define TIM_FLAG_TRIGGER (TIM_SR_TIF)
+#define TIM_FLAG_BREAK (TIM_SR_BIF)
+#define TIM_FLAG_CC1OF (TIM_SR_CC1OF)
+#define TIM_FLAG_CC2OF (TIM_SR_CC2OF)
+#define TIM_FLAG_CC3OF (TIM_SR_CC3OF)
+#define TIM_FLAG_CC4OF (TIM_SR_CC4OF)
+
+#define IS_TIM_FLAG(FLAG) (((FLAG) == TIM_FLAG_UPDATE) || \
+ ((FLAG) == TIM_FLAG_CC1) || \
+ ((FLAG) == TIM_FLAG_CC2) || \
+ ((FLAG) == TIM_FLAG_CC3) || \
+ ((FLAG) == TIM_FLAG_CC4) || \
+ ((FLAG) == TIM_FLAG_COM) || \
+ ((FLAG) == TIM_FLAG_TRIGGER) || \
+ ((FLAG) == TIM_FLAG_BREAK) || \
+ ((FLAG) == TIM_FLAG_CC1OF) || \
+ ((FLAG) == TIM_FLAG_CC2OF) || \
+ ((FLAG) == TIM_FLAG_CC3OF) || \
+ ((FLAG) == TIM_FLAG_CC4OF))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Source
+ * @{
+ */
+#define TIM_CLOCKSOURCE_ETRMODE2 (TIM_SMCR_ETPS_1)
+#define TIM_CLOCKSOURCE_INTERNAL (TIM_SMCR_ETPS_0)
+#define TIM_CLOCKSOURCE_ITR0 ((uint32_t)0x0000)
+#define TIM_CLOCKSOURCE_ITR1 (TIM_SMCR_TS_0)
+#define TIM_CLOCKSOURCE_ITR2 (TIM_SMCR_TS_1)
+#define TIM_CLOCKSOURCE_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1)
+#define TIM_CLOCKSOURCE_TI1ED (TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_TI1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_TI2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_ETRMODE1 (TIM_SMCR_TS)
+
+#define IS_TIM_CLOCKSOURCE(CLOCK) (((CLOCK) == TIM_CLOCKSOURCE_INTERNAL) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR0) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR1) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR3) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI1ED) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI1) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE1))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Polarity
+ * @{
+ */
+#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */
+
+#define IS_TIM_CLOCKPOLARITY(POLARITY) (((POLARITY) == TIM_CLOCKPOLARITY_INVERTED) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_NONINVERTED) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_RISING) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_FALLING) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_BOTHEDGE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Prescaler
+ * @{
+ */
+#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */
+#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */
+#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */
+
+#define IS_TIM_CLOCKPRESCALER(PRESCALER) (((PRESCALER) == TIM_CLOCKPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Filter
+ * @{
+ */
+#define IS_TIM_CLOCKFILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Source
+ * @{
+ */
+#define TIM_CLEARINPUTSOURCE_ETR ((uint32_t)0x0001)
+#define TIM_CLEARINPUTSOURCE_NONE ((uint32_t)0x0000)
+
+#define IS_TIM_CLEARINPUT_SOURCE(SOURCE) (((SOURCE) == TIM_CLEARINPUTSOURCE_NONE) || \
+ ((SOURCE) == TIM_CLEARINPUTSOURCE_ETR))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Polarity
+ * @{
+ */
+#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */
+#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */
+#define IS_TIM_CLEARINPUT_POLARITY(POLARITY) (((POLARITY) == TIM_CLEARINPUTPOLARITY_INVERTED) || \
+ ((POLARITY) == TIM_CLEARINPUTPOLARITY_NONINVERTED))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Prescaler
+ * @{
+ */
+#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */
+#define IS_TIM_CLEARINPUT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Filter
+ * @{
+ */
+#define IS_TIM_CLEARINPUT_FILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state
+ * @{
+ */
+#define TIM_OSSR_ENABLE (TIM_BDTR_OSSR)
+#define TIM_OSSR_DISABLE ((uint32_t)0x0000)
+
+#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSR_ENABLE) || \
+ ((STATE) == TIM_OSSR_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state
+ * @{
+ */
+#define TIM_OSSI_ENABLE (TIM_BDTR_OSSI)
+#define TIM_OSSI_DISABLE ((uint32_t)0x0000)
+
+#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSI_ENABLE) || \
+ ((STATE) == TIM_OSSI_DISABLE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Lock_level
+ * @{
+ */
+#define TIM_LOCKLEVEL_OFF ((uint32_t)0x0000)
+#define TIM_LOCKLEVEL_1 (TIM_BDTR_LOCK_0)
+#define TIM_LOCKLEVEL_2 (TIM_BDTR_LOCK_1)
+#define TIM_LOCKLEVEL_3 (TIM_BDTR_LOCK)
+
+#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLEVEL_OFF) || \
+ ((LEVEL) == TIM_LOCKLEVEL_1) || \
+ ((LEVEL) == TIM_LOCKLEVEL_2) || \
+ ((LEVEL) == TIM_LOCKLEVEL_3))
+/**
+ * @}
+ */
+/** @defgroup TIM_Break_Input_enable_disable
+ * @{
+ */
+#define TIM_BREAK_ENABLE (TIM_BDTR_BKE)
+#define TIM_BREAK_DISABLE ((uint32_t)0x0000)
+
+#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_BREAK_ENABLE) || \
+ ((STATE) == TIM_BREAK_DISABLE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Break_Polarity
+ * @{
+ */
+#define TIM_BREAKPOLARITY_LOW ((uint32_t)0x0000)
+#define TIM_BREAKPOLARITY_HIGH (TIM_BDTR_BKP)
+
+#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BREAKPOLARITY_LOW) || \
+ ((POLARITY) == TIM_BREAKPOLARITY_HIGH))
+/**
+ * @}
+ */
+/** @defgroup TIM_AOE_Bit_Set_Reset
+ * @{
+ */
+#define TIM_AUTOMATICOUTPUT_ENABLE (TIM_BDTR_AOE)
+#define TIM_AUTOMATICOUTPUT_DISABLE ((uint32_t)0x0000)
+
+#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AUTOMATICOUTPUT_ENABLE) || \
+ ((STATE) == TIM_AUTOMATICOUTPUT_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Mode_Selection
+ * @{
+ */
+#define TIM_TRGO_RESET ((uint32_t)0x0000)
+#define TIM_TRGO_ENABLE (TIM_CR2_MMS_0)
+#define TIM_TRGO_UPDATE (TIM_CR2_MMS_1)
+#define TIM_TRGO_OC1 ((TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+#define TIM_TRGO_OC1REF (TIM_CR2_MMS_2)
+#define TIM_TRGO_OC2REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_0))
+#define TIM_TRGO_OC3REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1))
+#define TIM_TRGO_OC4REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+
+#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO_RESET) || \
+ ((SOURCE) == TIM_TRGO_ENABLE) || \
+ ((SOURCE) == TIM_TRGO_UPDATE) || \
+ ((SOURCE) == TIM_TRGO_OC1) || \
+ ((SOURCE) == TIM_TRGO_OC1REF) || \
+ ((SOURCE) == TIM_TRGO_OC2REF) || \
+ ((SOURCE) == TIM_TRGO_OC3REF) || \
+ ((SOURCE) == TIM_TRGO_OC4REF))
+
+
+/**
+ * @}
+ */
+/** @defgroup TIM_Slave_Mode
+ * @{
+ */
+#define TIM_SLAVEMODE_DISABLE ((uint32_t)0x0000)
+#define TIM_SLAVEMODE_RESET ((uint32_t)0x0004)
+#define TIM_SLAVEMODE_GATED ((uint32_t)0x0005)
+#define TIM_SLAVEMODE_TRIGGER ((uint32_t)0x0006)
+#define TIM_SLAVEMODE_EXTERNAL1 ((uint32_t)0x0007)
+
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \
+ ((MODE) == TIM_SLAVEMODE_GATED) || \
+ ((MODE) == TIM_SLAVEMODE_RESET) || \
+ ((MODE) == TIM_SLAVEMODE_TRIGGER) || \
+ ((MODE) == TIM_SLAVEMODE_EXTERNAL1))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Slave_Mode
+ * @{
+ */
+
+#define TIM_MASTERSLAVEMODE_ENABLE ((uint32_t)0x0080)
+#define TIM_MASTERSLAVEMODE_DISABLE ((uint32_t)0x0000)
+#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MASTERSLAVEMODE_ENABLE) || \
+ ((STATE) == TIM_MASTERSLAVEMODE_DISABLE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Trigger_Selection
+ * @{
+ */
+#define TIM_TS_ITR0 ((uint32_t)0x0000)
+#define TIM_TS_ITR1 ((uint32_t)0x0010)
+#define TIM_TS_ITR2 ((uint32_t)0x0020)
+#define TIM_TS_ITR3 ((uint32_t)0x0030)
+#define TIM_TS_TI1F_ED ((uint32_t)0x0040)
+#define TIM_TS_TI1FP1 ((uint32_t)0x0050)
+#define TIM_TS_TI2FP2 ((uint32_t)0x0060)
+#define TIM_TS_ETRF ((uint32_t)0x0070)
+#define TIM_TS_NONE ((uint32_t)0xFFFF)
+#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3) || \
+ ((SELECTION) == TIM_TS_TI1F_ED) || \
+ ((SELECTION) == TIM_TS_TI1FP1) || \
+ ((SELECTION) == TIM_TS_TI2FP2) || \
+ ((SELECTION) == TIM_TS_ETRF))
+#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3))
+#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3) || \
+ ((SELECTION) == TIM_TS_NONE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Polarity
+ * @{
+ */
+#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+
+#define IS_TIM_TRIGGERPOLARITY(POLARITY) (((POLARITY) == TIM_TRIGGERPOLARITY_INVERTED ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_NONINVERTED) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_RISING ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_FALLING ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_BOTHEDGE ))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Prescaler
+ * @{
+ */
+#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */
+#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */
+#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */
+
+#define IS_TIM_TRIGGERPRESCALER(PRESCALER) (((PRESCALER) == TIM_TRIGGERPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Filter
+ * @{
+ */
+#define IS_TIM_TRIGGERFILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+ /** @defgroup TIM_TI1_Selection
+ * @{
+ */
+#define TIM_TI1SELECTION_CH1 ((uint32_t)0x0000)
+#define TIM_TI1SELECTION_XORCOMBINATION (TIM_CR2_TI1S)
+
+#define IS_TIM_TI1SELECTION(TI1SELECTION) (((TI1SELECTION) == TIM_TI1SELECTION_CH1) || \
+ ((TI1SELECTION) == TIM_TI1SELECTION_XORCOMBINATION))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Base_address
+ * @{
+ */
+#define TIM_DMABase_CR1 (0x00000000)
+#define TIM_DMABase_CR2 (0x00000001)
+#define TIM_DMABase_SMCR (0x00000002)
+#define TIM_DMABase_DIER (0x00000003)
+#define TIM_DMABase_SR (0x00000004)
+#define TIM_DMABase_EGR (0x00000005)
+#define TIM_DMABase_CCMR1 (0x00000006)
+#define TIM_DMABase_CCMR2 (0x00000007)
+#define TIM_DMABase_CCER (0x00000008)
+#define TIM_DMABase_CNT (0x00000009)
+#define TIM_DMABase_PSC (0x0000000A)
+#define TIM_DMABase_ARR (0x0000000B)
+#define TIM_DMABase_RCR (0x0000000C)
+#define TIM_DMABase_CCR1 (0x0000000D)
+#define TIM_DMABase_CCR2 (0x0000000E)
+#define TIM_DMABase_CCR3 (0x0000000F)
+#define TIM_DMABase_CCR4 (0x00000010)
+#define TIM_DMABase_BDTR (0x00000011)
+#define TIM_DMABase_DCR (0x00000012)
+#define TIM_DMABase_OR (0x00000013)
+#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1) || \
+ ((BASE) == TIM_DMABase_CR2) || \
+ ((BASE) == TIM_DMABase_SMCR) || \
+ ((BASE) == TIM_DMABase_DIER) || \
+ ((BASE) == TIM_DMABase_SR) || \
+ ((BASE) == TIM_DMABase_EGR) || \
+ ((BASE) == TIM_DMABase_CCMR1) || \
+ ((BASE) == TIM_DMABase_CCMR2) || \
+ ((BASE) == TIM_DMABase_CCER) || \
+ ((BASE) == TIM_DMABase_CNT) || \
+ ((BASE) == TIM_DMABase_PSC) || \
+ ((BASE) == TIM_DMABase_ARR) || \
+ ((BASE) == TIM_DMABase_RCR) || \
+ ((BASE) == TIM_DMABase_CCR1) || \
+ ((BASE) == TIM_DMABase_CCR2) || \
+ ((BASE) == TIM_DMABase_CCR3) || \
+ ((BASE) == TIM_DMABase_CCR4) || \
+ ((BASE) == TIM_DMABase_BDTR) || \
+ ((BASE) == TIM_DMABase_DCR) || \
+ ((BASE) == TIM_DMABase_OR))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Burst_Length
+ * @{
+ */
+#define TIM_DMABurstLength_1Transfer (0x00000000)
+#define TIM_DMABurstLength_2Transfers (0x00000100)
+#define TIM_DMABurstLength_3Transfers (0x00000200)
+#define TIM_DMABurstLength_4Transfers (0x00000300)
+#define TIM_DMABurstLength_5Transfers (0x00000400)
+#define TIM_DMABurstLength_6Transfers (0x00000500)
+#define TIM_DMABurstLength_7Transfers (0x00000600)
+#define TIM_DMABurstLength_8Transfers (0x00000700)
+#define TIM_DMABurstLength_9Transfers (0x00000800)
+#define TIM_DMABurstLength_10Transfers (0x00000900)
+#define TIM_DMABurstLength_11Transfers (0x00000A00)
+#define TIM_DMABurstLength_12Transfers (0x00000B00)
+#define TIM_DMABurstLength_13Transfers (0x00000C00)
+#define TIM_DMABurstLength_14Transfers (0x00000D00)
+#define TIM_DMABurstLength_15Transfers (0x00000E00)
+#define TIM_DMABurstLength_16Transfers (0x00000F00)
+#define TIM_DMABurstLength_17Transfers (0x00001000)
+#define TIM_DMABurstLength_18Transfers (0x00001100)
+#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Transfer) || \
+ ((LENGTH) == TIM_DMABurstLength_2Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_3Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_4Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_5Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_6Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_7Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_8Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_9Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_10Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_11Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_12Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_13Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_14Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_15Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_16Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_17Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_18Transfers))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Filer_Value
+ * @{
+ */
+#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Handle_index
+ * @{
+ */
+#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0) /*!< Index of the DMA handle used for Update DMA requests */
+#define TIM_DMA_ID_CC1 ((uint16_t) 0x1) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */
+#define TIM_DMA_ID_CC2 ((uint16_t) 0x2) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */
+#define TIM_DMA_ID_CC3 ((uint16_t) 0x3) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */
+#define TIM_DMA_ID_CC4 ((uint16_t) 0x4) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */
+#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x5) /*!< Index of the DMA handle used for Commutation DMA requests */
+#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x6) /*!< Index of the DMA handle used for Trigger DMA requests */
+/**
+ * @}
+ */
+
+/** @defgroup Channel_CC_State
+ * @{
+ */
+#define TIM_CCx_ENABLE ((uint32_t)0x0001)
+#define TIM_CCx_DISABLE ((uint32_t)0x0000)
+#define TIM_CCxN_ENABLE ((uint32_t)0x0004)
+#define TIM_CCxN_DISABLE ((uint32_t)0x0000)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset TIM handle state
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TIM_STATE_RESET)
+
+/**
+ * @brief Enable the TIM peripheral.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN))
+
+/**
+ * @brief Enable the TIM main Output.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE))
+
+
+/* The counter of a timer instance is disabled only if all the CCx and CCxN
+ channels have been disabled */
+#define CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E))
+#define CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE))
+
+/**
+ * @brief Disable the TIM peripheral.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & CCER_CCxE_MASK) == 0) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & CCER_CCxNE_MASK) == 0) \
+ { \
+ (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \
+ } \
+ } \
+ } while(0)
+
+/* The Main Output of a timer instance is disabled only if all the CCx and CCxN
+ channels have been disabled */
+/**
+ * @brief Disable the TIM main Output.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & CCER_CCxE_MASK) == 0) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & CCER_CCxNE_MASK) == 0) \
+ { \
+ (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \
+ } \
+ } \
+ } while(0)
+
+#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__))
+#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__))
+#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__))
+#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__))
+#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__))
+#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+#define __HAL_TIM_GET_ITSTATUS(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
+
+#define __HAL_TIM_DIRECTION_STATUS(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR))
+#define __HAL_TIM_PRESCALER (__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__))
+
+#define __HAL_TIM_SetICPrescalerValue(__HANDLE__, __CHANNEL__, __ICPSC__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\
+ ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8)))
+
+#define __HAL_TIM_ResetICPrescalerValue(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC2PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC3PSC) :\
+ ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC4PSC))
+
+/**
+ * @brief Sets the TIM Capture Compare Register value on runtime without
+ * calling another time ConfigChannel function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __COMPARE__: specifies the Capture Compare register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SetCompare(__HANDLE__, __CHANNEL__, __COMPARE__) \
+(*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2)) = (__COMPARE__))
+
+/**
+ * @brief Gets the TIM Capture Compare Register value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channel associated with the capture compare register
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get capture/compare 1 register value
+ * @arg TIM_CHANNEL_2: get capture/compare 2 register value
+ * @arg TIM_CHANNEL_3: get capture/compare 3 register value
+ * @arg TIM_CHANNEL_4: get capture/compare 4 register value
+ * @retval None
+ */
+#define __HAL_TIM_GetCompare(__HANDLE__, __CHANNEL__) \
+ (*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2)))
+
+/**
+ * @brief Sets the TIM Counter Register value on runtime.
+ * @param __HANDLE__: TIM handle.
+ * @param __COUNTER__: specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SetCounter(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__))
+
+/**
+ * @brief Gets the TIM Counter Register value on runtime.
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GetCounter(__HANDLE__) ((__HANDLE__)->Instance->CNT)
+
+/**
+ * @brief Sets the TIM Autoreload Register value on runtime without calling
+ * another time any Init function.
+ * @param __HANDLE__: TIM handle.
+ * @param __AUTORELOAD__: specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SetAutoreload(__HANDLE__, __AUTORELOAD__) \
+ do{ \
+ (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \
+ (__HANDLE__)->Init.Period = (__AUTORELOAD__); \
+ } while(0)
+/**
+ * @brief Gets the TIM Autoreload Register value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GetAutoreload(__HANDLE__) ((__HANDLE__)->Instance->ARR)
+
+/**
+ * @brief Sets the TIM Clock Division value on runtime without calling
+ * another time any Init function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CKD__: specifies the clock division value.
+ * This parameter can be one of the following value:
+ * @arg TIM_CLOCKDIVISION_DIV1
+ * @arg TIM_CLOCKDIVISION_DIV2
+ * @arg TIM_CLOCKDIVISION_DIV4
+ * @retval None
+ */
+#define __HAL_TIM_SetClockDivision(__HANDLE__, __CKD__) \
+ do{ \
+ (__HANDLE__)->Instance->CR1 &= (uint16_t)(~TIM_CR1_CKD); \
+ (__HANDLE__)->Instance->CR1 |= (__CKD__); \
+ (__HANDLE__)->Init.ClockDivision = (__CKD__); \
+ } while(0)
+/**
+ * @brief Gets the TIM Clock Division value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GetClockDivision(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
+
+/**
+ * @brief Sets the TIM Input Capture prescaler on runtime without calling
+ * another time HAL_TIM_IC_ConfigChannel() function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __ICPSC__: specifies the Input Capture4 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+#define __HAL_TIM_SetICPrescaler(__HANDLE__, __CHANNEL__, __ICPSC__) \
+ do{ \
+ __HAL_TIM_ResetICPrescalerValue((__HANDLE__), (__CHANNEL__)); \
+ __HAL_TIM_SetICPrescalerValue((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \
+ } while(0)
+
+/**
+ * @brief Gets the TIM Input Capture prescaler on runtime
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get input capture 1 prescaler value
+ * @arg TIM_CHANNEL_2: get input capture 2 prescaler value
+ * @arg TIM_CHANNEL_3: get input capture 3 prescaler value
+ * @arg TIM_CHANNEL_4: get input capture 4 prescaler value
+ * @retval None
+ */
+#define __HAL_TIM_GetICPrescaler(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\
+ (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8)
+/**
+ * @}
+ */
+
+/* Include TIM HAL Extension module */
+#include "stm32f4xx_hal_tim_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Time Base functions ********************************************************/
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim);
+
+/* Timer Output Compare functions **********************************************/
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Timer PWM functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Timer Input Capture functions ***********************************************/
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Timer One Pulse functions ***************************************************/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode);
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Timer Encoder functions *****************************************************/
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim);
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Interrupt Handler functions **********************************************/
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim);
+
+/* Control functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel);
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig);
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource);
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Callback in non blocking modes (Interrupt and DMA) *************************/
+void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim);
+
+/* Peripheral State functions **************************************************/
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim);
+
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure);
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter);
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void HAL_TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma);
+void HAL_TIM_DMAError(DMA_HandleTypeDef *hdma);
+void HAL_TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma);
+void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_TIM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_tim_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,233 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_tim_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of TIM HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_TIM_EX_H
+#define __STM32F4xx_HAL_TIM_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL
+ * @{
+ */
+
+/** @addtogroup TIMEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief TIM Hall sensor Configuration Structure definition
+ */
+
+typedef struct
+{
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+ uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+} TIM_HallSensor_InitTypeDef;
+
+/**
+ * @brief TIM Master configuration Structure definition
+ */
+typedef struct {
+ uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection.
+ This parameter can be a value of @ref TIM_Master_Mode_Selection */
+ uint32_t MasterSlaveMode; /*!< Master/slave mode selection.
+ This parameter can be a value of @ref TIM_Master_Slave_Mode */
+}TIM_MasterConfigTypeDef;
+
+/**
+ * @brief TIM Break and Dead time configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OffStateRunMode; /*!< TIM off state in run mode.
+ This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+ uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode.
+ This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+ uint32_t LockLevel; /*!< TIM Lock level.
+ This parameter can be a value of @ref TIM_Lock_level */
+ uint32_t DeadTime; /*!< TIM dead Time.
+ This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+ uint32_t BreakState; /*!< TIM Break State.
+ This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+ uint32_t BreakPolarity; /*!< TIM Break input polarity.
+ This parameter can be a value of @ref TIM_Break_Polarity */
+ uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state.
+ This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+}TIM_BreakDeadTimeConfigTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Constants
+ * @{
+ */
+
+/** @defgroup TIMEx_Remap
+ * @{
+ */
+
+#define TIM_TIM2_TIM8_TRGO (0x00000000)
+#define TIM_TIM2_ETH_PTP (0x00000400)
+#define TIM_TIM2_USBFS_SOF (0x00000800)
+#define TIM_TIM2_USBHS_SOF (0x00000C00)
+#define TIM_TIM5_GPIO (0x00000000)
+#define TIM_TIM5_LSI (0x00000040)
+#define TIM_TIM5_LSE (0x00000080)
+#define TIM_TIM5_RTC (0x000000C0)
+#define TIM_TIM11_GPIO (0x00000000)
+#define TIM_TIM11_HSE (0x00000002)
+
+#define IS_TIM_REMAP(TIM_REMAP) (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)||\
+ ((TIM_REMAP) == TIM_TIM2_ETH_PTP)||\
+ ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)||\
+ ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)||\
+ ((TIM_REMAP) == TIM_TIM5_GPIO)||\
+ ((TIM_REMAP) == TIM_TIM5_LSI)||\
+ ((TIM_REMAP) == TIM_TIM5_LSE)||\
+ ((TIM_REMAP) == TIM_TIM5_RTC)||\
+ ((TIM_REMAP) == TIM_TIM11_GPIO)||\
+ ((TIM_REMAP) == TIM_TIM11_HSE))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Timer Hall Sensor functions **********************************************/
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef* htim, TIM_HallSensor_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef* htim);
+
+void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef* htim);
+
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef* htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef* htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef* htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef* htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef* htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef* htim);
+
+/* Timer Complementary Output Compare functions *****************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Timer Complementary PWM functions ****************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel);
+
+/* Timer Complementary One Pulse functions **********************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel);
+
+/* Extnsion Control functions ************************************************/
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef* htim, TIM_MasterConfigTypeDef * sMasterConfig);
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef* htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef* htim, uint32_t Remap);
+
+/* Extension Callback *********************************************************/
+void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef* htim);
+void HAL_TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
+
+/* Extension Peripheral State functions **************************************/
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef* htim);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_TIM_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_uart.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,609 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_uart.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of UART HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_UART_H
+#define __STM32F4xx_HAL_UART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup UART
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief UART Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
+ The baud rate is computed using the following formula:
+ - IntegerDivider = ((PCLKx) / (8 * (OVR8+1) * (huart->Init.BaudRate)))
+ - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8 * (OVR8+1)) + 0.5
+ Where OVR8 is the "oversampling by 8 mode" configuration bit in the CR1 register. */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref UART_Word_Length */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref UART_Stop_Bits */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref UART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref UART_Mode */
+
+ uint32_t HwFlowCtl; /*!< Specifies wether the hardware flow control mode is enabled
+ or disabled.
+ This parameter can be a value of @ref UART_Hardware_Flow_Control */
+
+ uint32_t OverSampling; /*!< Specifies wether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
+ This parameter can be a value of @ref UART_Over_Sampling */
+}UART_InitTypeDef;
+
+/**
+ * @brief HAL UART State structures definition
+ */
+typedef enum
+{
+ HAL_UART_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */
+ HAL_UART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_UART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_UART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_UART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_UART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_UART_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_UART_STATE_ERROR = 0x04 /*!< Error */
+}HAL_UART_StateTypeDef;
+
+/**
+ * @brief HAL UART Error Code structure definition
+ */
+typedef enum
+{
+ HAL_UART_ERROR_NONE = 0x00, /*!< No error */
+ HAL_UART_ERROR_PE = 0x01, /*!< Parity error */
+ HAL_UART_ERROR_NE = 0x02, /*!< Noise error */
+ HAL_UART_ERROR_FE = 0x04, /*!< frame error */
+ HAL_UART_ERROR_ORE = 0x08, /*!< Overrun error */
+ HAL_UART_ERROR_DMA = 0x10 /*!< DMA transfer error */
+}HAL_UART_ErrorTypeDef;
+
+/**
+ * @brief UART handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /* UART registers base address */
+
+ UART_InitTypeDef Init; /* UART communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to UART Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* UART Tx Transfer size */
+
+ uint16_t TxXferCount; /* UART Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to UART Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* UART Rx Transfer size */
+
+ uint16_t RxXferCount; /* UART Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /* UART Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* UART Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ __IO HAL_UART_StateTypeDef State; /* UART communication state */
+
+ __IO HAL_UART_ErrorTypeDef ErrorCode; /* UART Error code */
+
+}UART_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup UART_Exported_Constants
+ * @{
+ */
+
+/** @defgroup UART_Word_Length
+ * @{
+ */
+#define UART_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \
+ ((LENGTH) == UART_WORDLENGTH_9B))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Stop_Bits
+ * @{
+ */
+#define UART_STOPBITS_1 ((uint32_t)0x00000000)
+#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
+ ((STOPBITS) == UART_STOPBITS_2))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Parity
+ * @{
+ */
+#define UART_PARITY_NONE ((uint32_t)0x00000000)
+#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \
+ ((PARITY) == UART_PARITY_EVEN) || \
+ ((PARITY) == UART_PARITY_ODD))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Hardware_Flow_Control
+ * @{
+ */
+#define UART_HWCONTROL_NONE ((uint32_t)0x00000000)
+#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE)
+#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE)
+#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE))
+#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
+ (((CONTROL) == UART_HWCONTROL_NONE) || \
+ ((CONTROL) == UART_HWCONTROL_RTS) || \
+ ((CONTROL) == UART_HWCONTROL_CTS) || \
+ ((CONTROL) == UART_HWCONTROL_RTS_CTS))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Mode
+ * @{
+ */
+#define UART_MODE_RX ((uint32_t)USART_CR1_RE)
+#define UART_MODE_TX ((uint32_t)USART_CR1_TE)
+#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_UART_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3) == 0x00) && ((MODE) != (uint32_t)0x000000))
+/**
+ * @}
+ */
+
+ /** @defgroup UART_State
+ * @{
+ */
+#define UART_STATE_DISABLE ((uint32_t)0x00000000)
+#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE)
+#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \
+ ((STATE) == UART_STATE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Over_Sampling
+ * @{
+ */
+#define UART_OVERSAMPLING_16 ((uint32_t)0x00000000)
+#define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8)
+#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \
+ ((SAMPLING) == UART_OVERSAMPLING_8))
+/**
+ * @}
+ */
+
+/** @defgroup UART_LIN_Break_Detection_Length
+ * @{
+ */
+#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000)
+#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)0x00000020)
+#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
+ ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
+/**
+ * @}
+ */
+
+/** @defgroup UART_WakeUp_functions
+ * @{
+ */
+#define UART_WAKEUPMETHODE_IDLELINE ((uint32_t)0x00000000)
+#define UART_WAKEUPMETHODE_ADDRESSMARK ((uint32_t)0x00000800)
+#define IS_UART_WAKEUPMETHODE(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHODE_IDLELINE) || \
+ ((WAKEUP) == UART_WAKEUPMETHODE_ADDRESSMARK))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the SR register
+ * @{
+ */
+#define UART_FLAG_CTS ((uint32_t)0x00000200)
+#define UART_FLAG_LBD ((uint32_t)0x00000100)
+#define UART_FLAG_TXE ((uint32_t)0x00000080)
+#define UART_FLAG_TC ((uint32_t)0x00000040)
+#define UART_FLAG_RXNE ((uint32_t)0x00000020)
+#define UART_FLAG_IDLE ((uint32_t)0x00000010)
+#define UART_FLAG_ORE ((uint32_t)0x00000008)
+#define UART_FLAG_NE ((uint32_t)0x00000004)
+#define UART_FLAG_FE ((uint32_t)0x00000002)
+#define UART_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Interrupt_definition
+ * Elements values convention: 0xY000XXXX
+ * - XXXX : Interrupt mask in the XX register
+ * - Y : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ *
+ * @{
+ */
+#define UART_IT_PE ((uint32_t)0x10000100)
+#define UART_IT_TXE ((uint32_t)0x10000080)
+#define UART_IT_TC ((uint32_t)0x10000040)
+#define UART_IT_RXNE ((uint32_t)0x10000020)
+#define UART_IT_IDLE ((uint32_t)0x10000010)
+
+#define UART_IT_LBD ((uint32_t)0x20000040)
+#define UART_IT_CTS ((uint32_t)0x30000400)
+
+#define UART_IT_ERR ((uint32_t)0x30000001)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset UART handle state
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_UART_STATE_RESET)
+
+/** @brief Flushs the UART DR register
+ * @param __HANDLE__: specifies the UART Handle.
+ */
+#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
+
+/** @brief Checks whether the specified UART flag is set or not.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5)
+ * @arg UART_FLAG_LBD: LIN Break detection flag
+ * @arg UART_FLAG_TXE: Transmit data register empty flag
+ * @arg UART_FLAG_TC: Transmission Complete flag
+ * @arg UART_FLAG_RXNE: Receive data register not empty flag
+ * @arg UART_FLAG_IDLE: Idle Line detection flag
+ * @arg UART_FLAG_ORE: OverRun Error flag
+ * @arg UART_FLAG_NE: Noise Error flag
+ * @arg UART_FLAG_FE: Framing Error flag
+ * @arg UART_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+
+#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified UART pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5).
+ * @arg UART_FLAG_LBD: LIN Break detection flag.
+ * @arg UART_FLAG_TC: Transmission Complete flag.
+ * @arg UART_FLAG_RXNE: Receive data register not empty flag.
+ *
+ * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun
+ * error) and IDLE (Idle line detected) flags are cleared by software
+ * sequence: a read operation to USART_SR register followed by a read
+ * operation to USART_DR register.
+ * @note RXNE flag can be also cleared by a read to the USART_DR register.
+ * @note TC flag can be also cleared by software sequence: a read operation to
+ * USART_SR register followed by a write operation to USART_DR register.
+ * @note TXE flag is cleared only by a write to the USART_DR register.
+ *
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief Clear the UART PE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) do{(__HANDLE__)->Instance->SR;\
+ (__HANDLE__)->Instance->DR;}while(0)
+/** @brief Clear the UART FE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the UART NE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the UART ORE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the UART IDLE pending flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Enables or disables the specified UART interrupt.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __INTERRUPT__: specifies the UART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_CTS: CTS change interrupt
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @param NewState: new state of the specified UART interrupt.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+#define UART_IT_MASK ((uint32_t)0x0000FFFF)
+#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & UART_IT_MASK)): \
+ (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & UART_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & UART_IT_MASK)))
+#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
+ (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & UART_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & UART_IT_MASK)))
+
+/** @brief Checks whether the specified UART interrupt has occurred or not.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or
+ * UART peripheral.
+ * @param __IT__: specifies the UART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ERR: Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == 1)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28) == 2)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK))
+
+/** @brief Enable CTS flow control
+ * This macro allows to enable CTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \
+ do{ \
+ SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
+ (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \
+ } while(0)
+
+/** @brief Disable CTS flow control
+ * This macro allows to disable CTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \
+ do{ \
+ CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \
+ (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \
+ } while(0)
+
+/** @brief Enable RTS flow control
+ * This macro allows to enable RTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \
+ do{ \
+ SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \
+ (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \
+ } while(0)
+
+/** @brief Disable RTS flow control
+ * This macro allows to disable RTS hardware flow control for a given UART instance,
+ * without need to call HAL_UART_Init() function.
+ * As involving direct access to UART registers, usage of this macro should be fully endorsed by user.
+ * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need
+ * for USART instance Deinit/Init, following conditions for macro call should be fulfilled :
+ * - UART instance should have already been initialised (through call of HAL_UART_Init() )
+ * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__))
+ * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)).
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be USART1, USART2 or LPUART.
+ * @retval None
+ */
+#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \
+ do{ \
+ CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\
+ (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \
+ } while(0)
+
+/** @brief macros to enables or disables the UART's one bit sampling method
+ * @param __HANDLE__: specifies the UART Handle.
+ * @retval None
+ */
+#define __HAL_UART_ONEBIT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT)
+#define __HAL_UART_ONEBIT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT))
+
+#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+#define __DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_)*25)/(4*(_BAUD_)))
+#define __DIVMANT_SAMPLING16(_PCLK_, _BAUD_) (__DIV_SAMPLING16((_PCLK_), (_BAUD_))/100)
+#define __DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_) (((__DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (__DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100)
+#define __UART_BRR_SAMPLING16(_PCLK_, _BAUD_) ((__DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4)|(__DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0x0F))
+
+#define __DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*25)/(2*(_BAUD_)))
+#define __DIVMANT_SAMPLING8(_PCLK_, _BAUD_) (__DIV_SAMPLING8((_PCLK_), (_BAUD_))/100)
+#define __DIVFRAQ_SAMPLING8(_PCLK_, _BAUD_) (((__DIV_SAMPLING8((_PCLK_), (_BAUD_)) - (__DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100)
+#define __UART_BRR_SAMPLING8(_PCLK_, _BAUD_) ((__DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) << 4)|(__DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0x0F))
+
+#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001)
+#define IS_UART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF)
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
+HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethode);
+HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart);
+void HAL_UART_MspInit(UART_HandleTypeDef *huart);
+void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
+
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
+void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
+void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
+
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
+
+/* Peripheral State functions **************************************************/
+HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
+uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_UART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_usart.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,490 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_usart.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of USART HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_USART_H
+#define __STM32F4xx_HAL_USART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup USART
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/**
+ * @brief USART Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the Usart communication baud rate.
+ The baud rate is computed using the following formula:
+ - IntegerDivider = ((PCLKx) / (8 * (husart->Init.BaudRate)))
+ - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref USART_Word_Length */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref USART_Stop_Bits */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref USART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref USART_Mode */
+
+ uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
+ This parameter can be a value of @ref USART_Clock_Polarity */
+
+ uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref USART_Clock_Phase */
+
+ uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref USART_Last_Bit */
+}USART_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_USART_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */
+ HAL_USART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_USART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_USART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_USART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_USART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission Reception process is ongoing */
+ HAL_USART_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_USART_STATE_ERROR = 0x04 /*!< Error */
+}HAL_USART_StateTypeDef;
+
+/**
+ * @brief HAL USART Error Code structure definition
+ */
+typedef enum
+{
+ HAL_USART_ERROR_NONE = 0x00, /*!< No error */
+ HAL_USART_ERROR_PE = 0x01, /*!< Parity error */
+ HAL_USART_ERROR_NE = 0x02, /*!< Noise error */
+ HAL_USART_ERROR_FE = 0x04, /*!< frame error */
+ HAL_USART_ERROR_ORE = 0x08, /*!< Overrun error */
+ HAL_USART_ERROR_DMA = 0x10 /*!< DMA transfer error */
+}HAL_USART_ErrorTypeDef;
+
+/**
+ * @brief USART handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /* USART registers base address */
+
+ USART_InitTypeDef Init; /* Usart communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to Usart Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* Usart Tx Transfer size */
+
+ __IO uint16_t TxXferCount; /* Usart Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to Usart Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* Usart Rx Transfer size */
+
+ __IO uint16_t RxXferCount; /* Usart Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /* Usart Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* Usart Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ __IO HAL_USART_StateTypeDef State; /* Usart communication state */
+
+ __IO HAL_USART_ErrorTypeDef ErrorCode; /* USART Error code */
+
+}USART_HandleTypeDef;
+
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup USART_Exported_Constants
+ * @{
+ */
+
+/** @defgroup USART_Word_Length
+ * @{
+ */
+#define USART_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define USART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WORDLENGTH_8B) || \
+ ((LENGTH) == USART_WORDLENGTH_9B))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Stop_Bits
+ * @{
+ */
+#define USART_STOPBITS_1 ((uint32_t)0x00000000)
+#define USART_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0)
+#define USART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+#define USART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
+#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_STOPBITS_1) || \
+ ((STOPBITS) == USART_STOPBITS_0_5) || \
+ ((STOPBITS) == USART_STOPBITS_1_5) || \
+ ((STOPBITS) == USART_STOPBITS_2))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Parity
+ * @{
+ */
+#define USART_PARITY_NONE ((uint32_t)0x00000000)
+#define USART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define USART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+#define IS_USART_PARITY(PARITY) (((PARITY) == USART_PARITY_NONE) || \
+ ((PARITY) == USART_PARITY_EVEN) || \
+ ((PARITY) == USART_PARITY_ODD))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Mode
+ * @{
+ */
+#define USART_MODE_RX ((uint32_t)USART_CR1_RE)
+#define USART_MODE_TX ((uint32_t)USART_CR1_TE)
+#define USART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_USART_MODE(MODE) ((((MODE) & (uint32_t)0xFFF3) == 0x00) && ((MODE) != (uint32_t)0x00))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock
+ * @{
+ */
+#define USART_CLOCK_DISABLED ((uint32_t)0x00000000)
+#define USART_CLOCK_ENABLED ((uint32_t)USART_CR2_CLKEN)
+#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_CLOCK_DISABLED) || \
+ ((CLOCK) == USART_CLOCK_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Polarity
+ * @{
+ */
+#define USART_POLARITY_LOW ((uint32_t)0x00000000)
+#define USART_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL)
+#define IS_USART_POLARITY(CPOL) (((CPOL) == USART_POLARITY_LOW) || ((CPOL) == USART_POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Phase
+ * @{
+ */
+#define USART_PHASE_1EDGE ((uint32_t)0x00000000)
+#define USART_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA)
+#define IS_USART_PHASE(CPHA) (((CPHA) == USART_PHASE_1EDGE) || ((CPHA) == USART_PHASE_2EDGE))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Last_Bit
+ * @{
+ */
+#define USART_LASTBIT_DISABLE ((uint32_t)0x00000000)
+#define USART_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL)
+#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LASTBIT_DISABLE) || \
+ ((LASTBIT) == USART_LASTBIT_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup USART_NACK_State
+ * @{
+ */
+#define USARTNACK_ENABLED ((uint32_t)USART_CR3_NACK)
+#define USARTNACK_DISABLED ((uint32_t)0x00000000)
+#define IS_USART_NACK_STATE(NACK) (((NACK) == USARTNACK_ENABLED) || \
+ ((NACK) == USARTNACK_DISABLED))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the SR register
+ * @{
+ */
+
+#define USART_FLAG_TXE ((uint32_t)0x00000080)
+#define USART_FLAG_TC ((uint32_t)0x00000040)
+#define USART_FLAG_RXNE ((uint32_t)0x00000020)
+#define USART_FLAG_IDLE ((uint32_t)0x00000010)
+#define USART_FLAG_ORE ((uint32_t)0x00000008)
+#define USART_FLAG_NE ((uint32_t)0x00000004)
+#define USART_FLAG_FE ((uint32_t)0x00000002)
+#define USART_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup USART_Interrupt_definition
+ * Elements values convention: 0xY000XXXX
+ * - XXXX : Interrupt mask in the XX register
+ * - Y : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ *
+ * @{
+ */
+#define USART_IT_PE ((uint32_t)0x10000100)
+#define USART_IT_TXE ((uint32_t)0x10000080)
+#define USART_IT_TC ((uint32_t)0x10000040)
+#define USART_IT_RXNE ((uint32_t)0x10000020)
+#define USART_IT_IDLE ((uint32_t)0x10000010)
+
+#define USART_IT_LBD ((uint32_t)0x20000040)
+#define USART_IT_CTS ((uint32_t)0x30000400)
+
+#define USART_IT_ERR ((uint32_t)0x30000001)
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @brief Reset USART handle state
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_USART_STATE_RESET)
+
+/** @brief Checks whether the specified Smartcard flag is set or not.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg USART_FLAG_TXE: Transmit data register empty flag
+ * @arg USART_FLAG_TC: Transmission Complete flag
+ * @arg USART_FLAG_RXNE: Receive data register not empty flag
+ * @arg USART_FLAG_IDLE: Idle Line detection flag
+ * @arg USART_FLAG_ORE: OverRun Error flag
+ * @arg USART_FLAG_NE: Noise Error flag
+ * @arg USART_FLAG_FE: Framing Error flag
+ * @arg USART_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+
+#define __HAL_USART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the specified Smartcard pending flags.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg USART_FLAG_TC: Transmission Complete flag.
+ * @arg USART_FLAG_RXNE: Receive data register not empty flag.
+ *
+ * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun
+ * error) and IDLE (Idle line detected) flags are cleared by software
+ * sequence: a read operation to USART_SR register followed by a read
+ * operation to USART_DR register.
+ * @note RXNE flag can be also cleared by a read to the USART_DR register.
+ * @note TC flag can be also cleared by software sequence: a read operation to
+ * USART_SR register followed by a write operation to USART_DR register.
+ * @note TXE flag is cleared only by a write to the USART_DR register.
+ *
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief Clear the USART PE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_PEFLAG(__HANDLE__) do{(__HANDLE__)->Instance->SR;\
+ (__HANDLE__)->Instance->DR;}while(0)
+/** @brief Clear the USART FE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_FEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the USART NE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_NEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the UART ORE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_OREFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the USART IDLE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Enables or disables the specified Usart interrupts.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @param __INTERRUPT__: specifies the USART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @param NewState: new state of the specified Usart interrupt.
+ * This parameter can be: ENABLE or DISABLE.
+ * @retval None
+ */
+#define USART_IT_MASK ((uint32_t)0x0000FFFF)
+#define __USART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & USART_IT_MASK)): \
+ (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & USART_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & USART_IT_MASK)))
+#define __USART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & USART_IT_MASK)): \
+ (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & USART_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & USART_IT_MASK)))
+
+
+/** @brief Checks whether the specified Usart interrupt has occurred or not.
+ * @param __HANDLE__: specifies the USART Handle.
+ * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral.
+ * @param __IT__: specifies the USART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ERR: Error interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == 1)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28) == 2)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & USART_IT_MASK))
+
+#define __USART_ENABLE(__HANDLE__) ( (__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+#define __USART_DISABLE(__HANDLE__) ( (__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+#define __DIV(_PCLK_, _BAUD_) (((_PCLK_)*25)/(4*(_BAUD_)))
+#define __DIVMANT(_PCLK_, _BAUD_) (__DIV((_PCLK_), (_BAUD_))/100)
+#define __DIVFRAQ(_PCLK_, _BAUD_) (((__DIV((_PCLK_), (_BAUD_)) - (__DIVMANT((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100)
+#define __USART_BRR(_PCLK_, _BAUD_) ((__DIVMANT((_PCLK_), (_BAUD_)) << 4)|(__DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0F))
+
+#define IS_USART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001)
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspDeInit(USART_HandleTypeDef *husart);
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart);
+void HAL_USART_IRQHandler(USART_HandleTypeDef *husart);
+void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart);
+
+/* Peripheral State functions **************************************************/
+HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart);
+uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_USART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_hal_wwdg.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,268 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_wwdg.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of WWDG HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_WWDG_H
+#define __STM32F4xx_HAL_WWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup WWDG
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief WWDG HAL State Structure definition
+ */
+typedef enum
+{
+ HAL_WWDG_STATE_RESET = 0x00, /*!< WWDG not yet initialized or disabled */
+ HAL_WWDG_STATE_READY = 0x01, /*!< WWDG initialized and ready for use */
+ HAL_WWDG_STATE_BUSY = 0x02, /*!< WWDG internal process is ongoing */
+ HAL_WWDG_STATE_TIMEOUT = 0x03, /*!< WWDG timeout state */
+ HAL_WWDG_STATE_ERROR = 0x04 /*!< WWDG error state */
+}HAL_WWDG_StateTypeDef;
+
+/**
+ * @brief WWDG Init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the prescaler value of the WWDG.
+ This parameter can be a value of @ref WWDG_Prescaler */
+
+ uint32_t Window; /*!< Specifies the WWDG window value to be compared to the downcounter.
+ This parameter must be a number lower than Max_Data = 0x80 */
+
+ uint32_t Counter; /*!< Specifies the WWDG free-running downcounter value.
+ This parameter must be a number between Min_Data = 0x40 and Max_Data = 0x7F */
+
+}WWDG_InitTypeDef;
+
+/**
+ * @brief WWDG handle Structure definition
+ */
+typedef struct
+{
+ WWDG_TypeDef *Instance; /*!< Register base address */
+
+ WWDG_InitTypeDef Init; /*!< WWDG required parameters */
+
+ HAL_LockTypeDef Lock; /*!< WWDG locking object */
+
+ __IO HAL_WWDG_StateTypeDef State; /*!< WWDG communication state */
+
+}WWDG_HandleTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup WWDG_Exported_Constants
+ * @{
+ */
+
+/** @defgroup WWDG_BitAddress_AliasRegion
+ * @brief WWDG registers bit address in the alias region
+ * @{
+ */
+
+/* --- CFR Register ---*/
+/* Alias word address of EWI bit */
+#define CFR_BASE (uint32_t)(WWDG_BASE + 0x04)
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Interrupt_definition
+ * @{
+ */
+#define WWDG_IT_EWI ((uint32_t)WWDG_CFR_EWI)
+
+#define IS_WWDG_IT(__IT__) ((__IT__) == WWDG_IT_EWI)
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Flag_definition
+ * @brief WWDG Flag definition
+ * @{
+ */
+#define WWDG_FLAG_EWIF ((uint32_t)WWDG_SR_EWIF) /*!< Early wakeup interrupt flag */
+#define IS_WWDG_FLAG(__FLAG__) ((__FLAG__) == WWDG_FLAG_EWIF))
+
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Prescaler
+ * @{
+ */
+#define WWDG_PRESCALER_1 ((uint32_t)0x00000000) /*!< WWDG counter clock = (PCLK1/4096)/1 */
+#define WWDG_PRESCALER_2 ((uint32_t)WWDG_CFR_WDGTB0) /*!< WWDG counter clock = (PCLK1/4096)/2 */
+#define WWDG_PRESCALER_4 ((uint32_t)WWDG_CFR_WDGTB1) /*!< WWDG counter clock = (PCLK1/4096)/4 */
+#define WWDG_PRESCALER_8 ((uint32_t)WWDG_CFR_WDGTB) /*!< WWDG counter clock = (PCLK1/4096)/8 */
+
+#define IS_WWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == WWDG_PRESCALER_1) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_2) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_4) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_8))
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Window
+ * @{
+ */
+#define IS_WWDG_WINDOW(__WINDOW__) ((__WINDOW__) <= 0x7F)
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Counter
+ * @{
+ */
+#define IS_WWDG_COUNTER(__COUNTER__) (((__COUNTER__) >= 0x40) && ((__COUNTER__) <= 0x7F))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Reset WWDG handle state
+ * @param __HANDLE__: WWDG handle
+ * @retval None
+ */
+#define __HAL_WWDG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_WWDG_STATE_RESET)
+
+/**
+ * @brief Enables the WWDG peripheral.
+ * @param __HANDLE__: WWDG handle
+ * @retval None
+ */
+#define __HAL_WWDG_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, WWDG_CR_WDGA)
+
+/**
+ * @brief Gets the selected WWDG's flag status.
+ * @param __HANDLE__: WWDG handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ * @retval The new state of WWDG_FLAG (SET or RESET).
+ */
+#define __HAL_WWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clears the WWDG's pending flags.
+ * @param __HANDLE__: WWDG handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ * @retval None
+ */
+#define __HAL_WWDG_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__))
+
+/**
+ * @brief Enables the WWDG early wakeup interrupt.
+ * @param __INTERRUPT__: specifies the interrupt to enable.
+ * This parameter can be one of the following values:
+ * @arg WWDG_IT_EWI: Early wakeup interrupt
+ * @note Once enabled this interrupt cannot be disabled except by a system reset.
+ * @retval None
+ */
+#define __HAL_WWDG_ENABLE_IT(__INTERRUPT__) (*(__IO uint32_t *) CFR_BASE |= (__INTERRUPT__))
+
+/** @brief Clear the WWDG's interrupt pending bits
+ * bits to clear the selected interrupt pending bits.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ */
+#define __HAL_WWDG_CLEAR_IT(__HANDLE__, __INTERRUPT__) __HAL_WWDG_CLEAR_FLAG((__HANDLE__), (__INTERRUPT__))
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg);
+HAL_StatusTypeDef HAL_WWDG_DeInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_MspDeInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_WakeupCallback(WWDG_HandleTypeDef* hwwdg);
+
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_WWDG_Start(WWDG_HandleTypeDef *hwwdg);
+HAL_StatusTypeDef HAL_WWDG_Start_IT(WWDG_HandleTypeDef *hwwdg);
+HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg, uint32_t Counter);
+void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg);
+
+/* Peripheral State functions **************************************************/
+HAL_WWDG_StateTypeDef HAL_WWDG_GetState(WWDG_HandleTypeDef *hwwdg);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_WWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_ll_fmc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1379 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_fmc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of FMC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_LL_FMC_H
+#define __STM32F4xx_LL_FMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FMC
+ * @{
+ */
+
+/* Exported typedef ----------------------------------------------------------*/
+#define FMC_NORSRAM_TypeDef FMC_Bank1_TypeDef
+#define FMC_NORSRAM_EXTENDED_TypeDef FMC_Bank1E_TypeDef
+#define FMC_NAND_TypeDef FMC_Bank2_3_TypeDef
+#define FMC_PCCARD_TypeDef FMC_Bank4_TypeDef
+#define FMC_SDRAM_TypeDef FMC_Bank5_6_TypeDef
+
+#define FMC_NORSRAM_DEVICE FMC_Bank1
+#define FMC_NORSRAM_EXTENDED_DEVICE FMC_Bank1E
+#define FMC_NAND_DEVICE FMC_Bank2_3
+#define FMC_PCCARD_DEVICE FMC_Bank4
+#define FMC_SDRAM_DEVICE FMC_Bank5_6
+
+/**
+ * @brief FMC_NORSRAM Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t NSBank; /*!< Specifies the NORSRAM memory device that will be used.
+ This parameter can be a value of @ref FMC_NORSRAM_Bank */
+
+ uint32_t DataAddressMux; /*!< Specifies whether the address and data values are
+ multiplexed on the data bus or not.
+ This parameter can be a value of @ref FMC_Data_Address_Bus_Multiplexing */
+
+ uint32_t MemoryType; /*!< Specifies the type of external memory attached to
+ the corresponding memory device.
+ This parameter can be a value of @ref FMC_Memory_Type */
+
+ uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be a value of @ref FMC_NORSRAM_Data_Width */
+
+ uint32_t BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory,
+ valid only with synchronous burst Flash memories.
+ This parameter can be a value of @ref FMC_Burst_Access_Mode */
+
+ uint32_t WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing
+ the Flash memory in burst mode.
+ This parameter can be a value of @ref FMC_Wait_Signal_Polarity */
+
+ uint32_t WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash
+ memory, valid only when accessing Flash memories in burst mode.
+ This parameter can be a value of @ref FMC_Wrap_Mode */
+
+ uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one
+ clock cycle before the wait state or during the wait state,
+ valid only when accessing memories in burst mode.
+ This parameter can be a value of @ref FMC_Wait_Timing */
+
+ uint32_t WriteOperation; /*!< Enables or disables the write operation in the selected device by the FMC.
+ This parameter can be a value of @ref FMC_Write_Operation */
+
+ uint32_t WaitSignal; /*!< Enables or disables the wait state insertion via wait
+ signal, valid for Flash memory access in burst mode.
+ This parameter can be a value of @ref FMC_Wait_Signal */
+
+ uint32_t ExtendedMode; /*!< Enables or disables the extended mode.
+ This parameter can be a value of @ref FMC_Extended_Mode */
+
+ uint32_t AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers,
+ valid only with asynchronous Flash memories.
+ This parameter can be a value of @ref FMC_AsynchronousWait */
+
+ uint32_t WriteBurst; /*!< Enables or disables the write burst operation.
+ This parameter can be a value of @ref FMC_Write_Burst */
+
+ uint32_t ContinuousClock; /*!< Enables or disables the FMC clock output to external memory devices.
+ This parameter is only enabled through the FMC_BCR1 register, and don't care
+ through FMC_BCR2..4 registers.
+ This parameter can be a value of @ref FMC_Continous_Clock */
+
+}FMC_NORSRAM_InitTypeDef;
+
+/**
+ * @brief FMC_NORSRAM Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t AddressSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address setup time.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+ @note This parameter is not used with synchronous NOR Flash memories. */
+
+ uint32_t AddressHoldTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address hold time.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 15.
+ @note This parameter is not used with synchronous NOR Flash memories. */
+
+ uint32_t DataSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the data setup time.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 255.
+ @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed
+ NOR Flash memories. */
+
+ uint32_t BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure
+ the duration of the bus turnaround.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+ @note This parameter is only used for multiplexed NOR Flash memories. */
+
+ uint32_t CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of
+ HCLK cycles. This parameter can be a value between Min_Data = 2 and Max_Data = 16.
+ @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM
+ accesses. */
+
+ uint32_t DataLatency; /*!< Defines the number of memory clock cycles to issue
+ to the memory before getting the first data.
+ The parameter value depends on the memory type as shown below:
+ - It must be set to 0 in case of a CRAM
+ - It is don't care in asynchronous NOR, SRAM or ROM accesses
+ - It may assume a value between Min_Data = 2 and Max_Data = 17 in NOR Flash memories
+ with synchronous burst mode enable */
+
+ uint32_t AccessMode; /*!< Specifies the asynchronous access mode.
+ This parameter can be a value of @ref FMC_Access_Mode */
+}FMC_NORSRAM_TimingTypeDef;
+
+/**
+ * @brief FMC_NAND Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t NandBank; /*!< Specifies the NAND memory device that will be used.
+ This parameter can be a value of @ref FMC_NAND_Bank */
+
+ uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory device.
+ This parameter can be any value of @ref FMC_Wait_feature */
+
+ uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be any value of @ref FMC_NAND_Data_Width */
+
+ uint32_t EccComputation; /*!< Enables or disables the ECC computation.
+ This parameter can be any value of @ref FMC_ECC */
+
+ uint32_t ECCPageSize; /*!< Defines the page size for the extended ECC.
+ This parameter can be any value of @ref FMC_ECC_Page_Size */
+
+ uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+}FMC_NAND_InitTypeDef;
+
+/**
+ * @brief FMC_NAND_PCCARD Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t SetupTime; /*!< Defines the number of HCLK cycles to setup address before
+ the command assertion for NAND-Flash read or write access
+ to common/Attribute or I/O memory space (depending on
+ the memory space timing to be configured).
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the
+ command for NAND-Flash read or write access to
+ common/Attribute or I/O memory space (depending on the
+ memory space timing to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address
+ (and data for write access) after the command de-assertion
+ for NAND-Flash read or write access to common/Attribute
+ or I/O memory space (depending on the memory space timing
+ to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the
+ data bus is kept in HiZ after the start of a NAND-Flash
+ write access to common/Attribute or I/O memory space (depending
+ on the memory space timing to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+}FMC_NAND_PCC_TimingTypeDef;
+
+/**
+ * @brief FMC_NAND Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the PCCARD Memory device.
+ This parameter can be any value of @ref FMC_Wait_feature */
+
+ uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+}FMC_PCCARD_InitTypeDef;
+
+/**
+ * @brief FMC_SDRAM Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t SDBank; /*!< Specifies the SDRAM memory device that will be used.
+ This parameter can be a value of @ref FMC_SDRAM_Bank */
+
+ uint32_t ColumnBitsNumber; /*!< Defines the number of bits of column address.
+ This parameter can be a value of @ref FMC_SDRAM_Column_Bits_number. */
+
+ uint32_t RowBitsNumber; /*!< Defines the number of bits of column address.
+ This parameter can be a value of @ref FMC_SDRAM_Row_Bits_number. */
+
+ uint32_t MemoryDataWidth; /*!< Defines the memory device width.
+ This parameter can be a value of @ref FMC_SDRAM_Memory_Bus_Width. */
+
+ uint32_t InternalBankNumber; /*!< Defines the number of the device's internal banks.
+ This parameter can be of @ref FMC_SDRAM_Internal_Banks_Number. */
+
+ uint32_t CASLatency; /*!< Defines the SDRAM CAS latency in number of memory clock cycles.
+ This parameter can be a value of @ref FMC_SDRAM_CAS_Latency. */
+
+ uint32_t WriteProtection; /*!< Enables the SDRAM device to be accessed in write mode.
+ This parameter can be a value of @ref FMC_SDRAM_Write_Protection. */
+
+ uint32_t SDClockPeriod; /*!< Define the SDRAM Clock Period for both SDRAM devices and they allow
+ to disable the clock before changing frequency.
+ This parameter can be a value of @ref FMC_SDRAM_Clock_Period. */
+
+ uint32_t ReadBurst; /*!< This bit enable the SDRAM controller to anticipate the next read
+ commands during the CAS latency and stores data in the Read FIFO.
+ This parameter can be a value of @ref FMC_SDRAM_Read_Burst. */
+
+ uint32_t ReadPipeDelay; /*!< Define the delay in system clock cycles on read data path.
+ This parameter can be a value of @ref FMC_SDRAM_Read_Pipe_Delay. */
+}FMC_SDRAM_InitTypeDef;
+
+/**
+ * @brief FMC_SDRAM Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t LoadToActiveDelay; /*!< Defines the delay between a Load Mode Register command and
+ an active or Refresh command in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t ExitSelfRefreshDelay; /*!< Defines the delay from releasing the self refresh command to
+ issuing the Activate command in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t SelfRefreshTime; /*!< Defines the minimum Self Refresh period in number of memory clock
+ cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t RowCycleDelay; /*!< Defines the delay between the Refresh command and the Activate command
+ and the delay between two consecutive Refresh commands in number of
+ memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t WriteRecoveryTime; /*!< Defines the Write recovery Time in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t RPDelay; /*!< Defines the delay between a Precharge Command and an other command
+ in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+
+ uint32_t RCDDelay; /*!< Defines the delay between the Activate Command and a Read/Write
+ command in number of memory clock cycles.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+}FMC_SDRAM_TimingTypeDef;
+
+/**
+ * @brief SDRAM command parameters structure definition
+ */
+typedef struct
+{
+ uint32_t CommandMode; /*!< Defines the command issued to the SDRAM device.
+ This parameter can be a value of @ref FMC_SDRAM_Command_Mode. */
+
+ uint32_t CommandTarget; /*!< Defines which device (1 or 2) the command will be issued to.
+ This parameter can be a value of @ref FMC_SDRAM_Command_Target. */
+
+ uint32_t AutoRefreshNumber; /*!< Defines the number of consecutive auto refresh command issued
+ in auto refresh mode.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
+ uint32_t ModeRegisterDefinition; /*!< Defines the SDRAM Mode register content */
+}FMC_SDRAM_CommandTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup FMC_NOR_SRAM_Controller
+ * @{
+ */
+
+/** @defgroup FMC_NORSRAM_Bank
+ * @{
+ */
+#define FMC_NORSRAM_BANK1 ((uint32_t)0x00000000)
+#define FMC_NORSRAM_BANK2 ((uint32_t)0x00000002)
+#define FMC_NORSRAM_BANK3 ((uint32_t)0x00000004)
+#define FMC_NORSRAM_BANK4 ((uint32_t)0x00000006)
+
+#define IS_FMC_NORSRAM_BANK(BANK) (((BANK) == FMC_NORSRAM_BANK1) || \
+ ((BANK) == FMC_NORSRAM_BANK2) || \
+ ((BANK) == FMC_NORSRAM_BANK3) || \
+ ((BANK) == FMC_NORSRAM_BANK4))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Data_Address_Bus_Multiplexing
+ * @{
+ */
+#define FMC_DATA_ADDRESS_MUX_DISABLE ((uint32_t)0x00000000)
+#define FMC_DATA_ADDRESS_MUX_ENABLE ((uint32_t)0x00000002)
+
+#define IS_FMC_MUX(MUX) (((MUX) == FMC_DATA_ADDRESS_MUX_DISABLE) || \
+ ((MUX) == FMC_DATA_ADDRESS_MUX_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Memory_Type
+ * @{
+ */
+#define FMC_MEMORY_TYPE_SRAM ((uint32_t)0x00000000)
+#define FMC_MEMORY_TYPE_PSRAM ((uint32_t)0x00000004)
+#define FMC_MEMORY_TYPE_NOR ((uint32_t)0x00000008)
+
+#define IS_FMC_MEMORY(MEMORY) (((MEMORY) == FMC_MEMORY_TYPE_SRAM) || \
+ ((MEMORY) == FMC_MEMORY_TYPE_PSRAM)|| \
+ ((MEMORY) == FMC_MEMORY_TYPE_NOR))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NORSRAM_Data_Width
+ * @{
+ */
+#define FMC_NORSRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000)
+#define FMC_NORSRAM_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010)
+#define FMC_NORSRAM_MEM_BUS_WIDTH_32 ((uint32_t)0x00000020)
+
+#define IS_FMC_NORSRAM_MEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_NORSRAM_MEM_BUS_WIDTH_8) || \
+ ((WIDTH) == FMC_NORSRAM_MEM_BUS_WIDTH_16) || \
+ ((WIDTH) == FMC_NORSRAM_MEM_BUS_WIDTH_32))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NORSRAM_Flash_Access
+ * @{
+ */
+#define FMC_NORSRAM_FLASH_ACCESS_ENABLE ((uint32_t)0x00000040)
+#define FMC_NORSRAM_FLASH_ACCESS_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Burst_Access_Mode
+ * @{
+ */
+#define FMC_BURST_ACCESS_MODE_DISABLE ((uint32_t)0x00000000)
+#define FMC_BURST_ACCESS_MODE_ENABLE ((uint32_t)0x00000100)
+
+#define IS_FMC_BURSTMODE(STATE) (((STATE) == FMC_BURST_ACCESS_MODE_DISABLE) || \
+ ((STATE) == FMC_BURST_ACCESS_MODE_ENABLE))
+/**
+ * @}
+ */
+
+
+/** @defgroup FMC_Wait_Signal_Polarity
+ * @{
+ */
+#define FMC_WAIT_SIGNAL_POLARITY_LOW ((uint32_t)0x00000000)
+#define FMC_WAIT_SIGNAL_POLARITY_HIGH ((uint32_t)0x00000200)
+
+#define IS_FMC_WAIT_POLARITY(POLARITY) (((POLARITY) == FMC_WAIT_SIGNAL_POLARITY_LOW) || \
+ ((POLARITY) == FMC_WAIT_SIGNAL_POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wrap_Mode
+ * @{
+ */
+#define FMC_WRAP_MODE_DISABLE ((uint32_t)0x00000000)
+#define FMC_WRAP_MODE_ENABLE ((uint32_t)0x00000400)
+
+#define IS_FMC_WRAP_MODE(MODE) (((MODE) == FMC_WRAP_MODE_DISABLE) || \
+ ((MODE) == FMC_WRAP_MODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_Timing
+ * @{
+ */
+#define FMC_WAIT_TIMING_BEFORE_WS ((uint32_t)0x00000000)
+#define FMC_WAIT_TIMING_DURING_WS ((uint32_t)0x00000800)
+
+#define IS_FMC_WAIT_SIGNAL_ACTIVE(ACTIVE) (((ACTIVE) == FMC_WAIT_TIMING_BEFORE_WS) || \
+ ((ACTIVE) == FMC_WAIT_TIMING_DURING_WS))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Write_Operation
+ * @{
+ */
+#define FMC_WRITE_OPERATION_DISABLE ((uint32_t)0x00000000)
+#define FMC_WRITE_OPERATION_ENABLE ((uint32_t)0x00001000)
+
+#define IS_FMC_WRITE_OPERATION(OPERATION) (((OPERATION) == FMC_WRITE_OPERATION_DISABLE) || \
+ ((OPERATION) == FMC_WRITE_OPERATION_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_Signal
+ * @{
+ */
+#define FMC_WAIT_SIGNAL_DISABLE ((uint32_t)0x00000000)
+#define FMC_WAIT_SIGNAL_ENABLE ((uint32_t)0x00002000)
+
+#define IS_FMC_WAITE_SIGNAL(SIGNAL) (((SIGNAL) == FMC_WAIT_SIGNAL_DISABLE) || \
+ ((SIGNAL) == FMC_WAIT_SIGNAL_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Extended_Mode
+ * @{
+ */
+#define FMC_EXTENDED_MODE_DISABLE ((uint32_t)0x00000000)
+#define FMC_EXTENDED_MODE_ENABLE ((uint32_t)0x00004000)
+
+#define IS_FMC_EXTENDED_MODE(MODE) (((MODE) == FMC_EXTENDED_MODE_DISABLE) || \
+ ((MODE) == FMC_EXTENDED_MODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_AsynchronousWait
+ * @{
+ */
+#define FMC_ASYNCHRONOUS_WAIT_DISABLE ((uint32_t)0x00000000)
+#define FMC_ASYNCHRONOUS_WAIT_ENABLE ((uint32_t)0x00008000)
+
+#define IS_FMC_ASYNWAIT(STATE) (((STATE) == FMC_ASYNCHRONOUS_WAIT_DISABLE) || \
+ ((STATE) == FMC_ASYNCHRONOUS_WAIT_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Write_Burst
+ * @{
+ */
+#define FMC_WRITE_BURST_DISABLE ((uint32_t)0x00000000)
+#define FMC_WRITE_BURST_ENABLE ((uint32_t)0x00080000)
+
+#define IS_FMC_WRITE_BURST(BURST) (((BURST) == FMC_WRITE_BURST_DISABLE) || \
+ ((BURST) == FMC_WRITE_BURST_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Continous_Clock
+ * @{
+ */
+#define FMC_CONTINUOUS_CLOCK_SYNC_ONLY ((uint32_t)0x00000000)
+#define FMC_CONTINUOUS_CLOCK_SYNC_ASYNC ((uint32_t)0x00100000)
+
+#define IS_FMC_CONTINOUS_CLOCK(CCLOCK) (((CCLOCK) == FMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \
+ ((CCLOCK) == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Address_Setup_Time
+ * @{
+ */
+#define IS_FMC_ADDRESS_SETUP_TIME(TIME) ((TIME) <= 15)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Address_Hold_Time
+ * @{
+ */
+#define IS_FMC_ADDRESS_HOLD_TIME(TIME) (((TIME) > 0) && ((TIME) <= 15))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Data_Setup_Time
+ * @{
+ */
+#define IS_FMC_DATASETUP_TIME(TIME) (((TIME) > 0) && ((TIME) <= 255))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Bus_Turn_around_Duration
+ * @{
+ */
+#define IS_FMC_TURNAROUND_TIME(TIME) ((TIME) <= 15)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_CLK_Division
+ * @{
+ */
+#define IS_FMC_CLK_DIV(DIV) (((DIV) > 1) && ((DIV) <= 16))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Data_Latency
+ * @{
+ */
+#define IS_FMC_DATA_LATENCY(LATENCY) (((LATENCY) > 1) && ((LATENCY) <= 17))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Access_Mode
+ * @{
+ */
+#define FMC_ACCESS_MODE_A ((uint32_t)0x00000000)
+#define FMC_ACCESS_MODE_B ((uint32_t)0x10000000)
+#define FMC_ACCESS_MODE_C ((uint32_t)0x20000000)
+#define FMC_ACCESS_MODE_D ((uint32_t)0x30000000)
+
+#define IS_FMC_ACCESS_MODE(MODE) (((MODE) == FMC_ACCESS_MODE_A) || \
+ ((MODE) == FMC_ACCESS_MODE_B) || \
+ ((MODE) == FMC_ACCESS_MODE_C) || \
+ ((MODE) == FMC_ACCESS_MODE_D))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NAND_Controller
+ * @{
+ */
+
+/** @defgroup FMC_NAND_Bank
+ * @{
+ */
+#define FMC_NAND_BANK2 ((uint32_t)0x00000010)
+#define FMC_NAND_BANK3 ((uint32_t)0x00000100)
+
+#define IS_FMC_NAND_BANK(BANK) (((BANK) == FMC_NAND_BANK2) || \
+ ((BANK) == FMC_NAND_BANK3))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_feature
+ * @{
+ */
+#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE ((uint32_t)0x00000000)
+#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE ((uint32_t)0x00000002)
+
+#define IS_FMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FMC_NAND_PCC_WAIT_FEATURE_DISABLE) || \
+ ((FEATURE) == FMC_NAND_PCC_WAIT_FEATURE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_PCR_Memory_Type
+ * @{
+ */
+#define FMC_PCR_MEMORY_TYPE_PCCARD ((uint32_t)0x00000000)
+#define FMC_PCR_MEMORY_TYPE_NAND ((uint32_t)0x00000008)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NAND_Data_Width
+ * @{
+ */
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000)
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010)
+
+#define IS_FMC_NAND_MEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_NAND_PCC_MEM_BUS_WIDTH_8) || \
+ ((WIDTH) == FMC_NAND_PCC_MEM_BUS_WIDTH_16))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_ECC
+ * @{
+ */
+#define FMC_NAND_ECC_DISABLE ((uint32_t)0x00000000)
+#define FMC_NAND_ECC_ENABLE ((uint32_t)0x00000040)
+
+#define IS_FMC_ECC_STATE(STATE) (((STATE) == FMC_NAND_ECC_DISABLE) || \
+ ((STATE) == FMC_NAND_ECC_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_ECC_Page_Size
+ * @{
+ */
+#define FMC_NAND_ECC_PAGE_SIZE_256BYTE ((uint32_t)0x00000000)
+#define FMC_NAND_ECC_PAGE_SIZE_512BYTE ((uint32_t)0x00020000)
+#define FMC_NAND_ECC_PAGE_SIZE_1024BYTE ((uint32_t)0x00040000)
+#define FMC_NAND_ECC_PAGE_SIZE_2048BYTE ((uint32_t)0x00060000)
+#define FMC_NAND_ECC_PAGE_SIZE_4096BYTE ((uint32_t)0x00080000)
+#define FMC_NAND_ECC_PAGE_SIZE_8192BYTE ((uint32_t)0x000A0000)
+
+#define IS_FMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FMC_NAND_ECC_PAGE_SIZE_256BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_512BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_8192BYTE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_TCLR_Setup_Time
+ * @{
+ */
+#define IS_FMC_TCLR_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_TAR_Setup_Time
+ * @{
+ */
+#define IS_FMC_TAR_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Setup_Time
+ * @{
+ */
+#define IS_FMC_SETUP_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_Setup_Time
+ * @{
+ */
+#define IS_FMC_WAIT_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Hold_Setup_Time
+ * @{
+ */
+#define IS_FMC_HOLD_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_HiZ_Setup_Time
+ * @{
+ */
+#define IS_FMC_HIZ_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Controller
+ * @{
+ */
+
+/** @defgroup FMC_SDRAM_Bank
+ * @{
+ */
+#define FMC_SDRAM_BANK1 ((uint32_t)0x00000000)
+#define FMC_SDRAM_BANK2 ((uint32_t)0x00000001)
+
+#define IS_FMC_SDRAM_BANK(BANK) (((BANK) == FMC_SDRAM_BANK1) || \
+ ((BANK) == FMC_SDRAM_BANK2))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Column_Bits_number
+ * @{
+ */
+#define FMC_SDRAM_COLUMN_BITS_NUM_8 ((uint32_t)0x00000000)
+#define FMC_SDRAM_COLUMN_BITS_NUM_9 ((uint32_t)0x00000001)
+#define FMC_SDRAM_COLUMN_BITS_NUM_10 ((uint32_t)0x00000002)
+#define FMC_SDRAM_COLUMN_BITS_NUM_11 ((uint32_t)0x00000003)
+
+#define IS_FMC_COLUMNBITS_NUMBER(COLUMN) (((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_8) || \
+ ((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_9) || \
+ ((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_10) || \
+ ((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_11))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Row_Bits_number
+ * @{
+ */
+#define FMC_SDRAM_ROW_BITS_NUM_11 ((uint32_t)0x00000000)
+#define FMC_SDRAM_ROW_BITS_NUM_12 ((uint32_t)0x00000004)
+#define FMC_SDRAM_ROW_BITS_NUM_13 ((uint32_t)0x00000008)
+
+#define IS_FMC_ROWBITS_NUMBER(ROW) (((ROW) == FMC_SDRAM_ROW_BITS_NUM_11) || \
+ ((ROW) == FMC_SDRAM_ROW_BITS_NUM_12) || \
+ ((ROW) == FMC_SDRAM_ROW_BITS_NUM_13))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Memory_Bus_Width
+ * @{
+ */
+#define FMC_SDRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000)
+#define FMC_SDRAM_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010)
+#define FMC_SDRAM_MEM_BUS_WIDTH_32 ((uint32_t)0x00000020)
+
+#define IS_FMC_SDMEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_8) || \
+ ((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_16) || \
+ ((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_32))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Internal_Banks_Number
+ * @{
+ */
+#define FMC_SDRAM_INTERN_BANKS_NUM_2 ((uint32_t)0x00000000)
+#define FMC_SDRAM_INTERN_BANKS_NUM_4 ((uint32_t)0x00000040)
+
+#define IS_FMC_INTERNALBANK_NUMBER(NUMBER) (((NUMBER) == FMC_SDRAM_INTERN_BANKS_NUM_2) || \
+ ((NUMBER) == FMC_SDRAM_INTERN_BANKS_NUM_4))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_CAS_Latency
+ * @{
+ */
+#define FMC_SDRAM_CAS_LATENCY_1 ((uint32_t)0x00000080)
+#define FMC_SDRAM_CAS_LATENCY_2 ((uint32_t)0x00000100)
+#define FMC_SDRAM_CAS_LATENCY_3 ((uint32_t)0x00000180)
+
+#define IS_FMC_CAS_LATENCY(LATENCY) (((LATENCY) == FMC_SDRAM_CAS_LATENCY_1) || \
+ ((LATENCY) == FMC_SDRAM_CAS_LATENCY_2) || \
+ ((LATENCY) == FMC_SDRAM_CAS_LATENCY_3))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Write_Protection
+ * @{
+ */
+#define FMC_SDRAM_WRITE_PROTECTION_DISABLE ((uint32_t)0x00000000)
+#define FMC_SDRAM_WRITE_PROTECTION_ENABLE ((uint32_t)0x00000200)
+
+#define IS_FMC_WRITE_PROTECTION(WRITE) (((WRITE) == FMC_SDRAM_WRITE_PROTECTION_DISABLE) || \
+ ((WRITE) == FMC_SDRAM_WRITE_PROTECTION_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Clock_Period
+ * @{
+ */
+#define FMC_SDRAM_CLOCK_DISABLE ((uint32_t)0x00000000)
+#define FMC_SDRAM_CLOCK_PERIOD_2 ((uint32_t)0x00000800)
+#define FMC_SDRAM_CLOCK_PERIOD_3 ((uint32_t)0x00000C00)
+
+#define IS_FMC_SDCLOCK_PERIOD(PERIOD) (((PERIOD) == FMC_SDRAM_CLOCK_DISABLE) || \
+ ((PERIOD) == FMC_SDRAM_CLOCK_PERIOD_2) || \
+ ((PERIOD) == FMC_SDRAM_CLOCK_PERIOD_3))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Read_Burst
+ * @{
+ */
+#define FMC_SDRAM_RBURST_DISABLE ((uint32_t)0x00000000)
+#define FMC_SDRAM_RBURST_ENABLE ((uint32_t)0x00001000)
+
+#define IS_FMC_READ_BURST(RBURST) (((RBURST) == FMC_SDRAM_RBURST_DISABLE) || \
+ ((RBURST) == FMC_SDRAM_RBURST_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Read_Pipe_Delay
+ * @{
+ */
+#define FMC_SDRAM_RPIPE_DELAY_0 ((uint32_t)0x00000000)
+#define FMC_SDRAM_RPIPE_DELAY_1 ((uint32_t)0x00002000)
+#define FMC_SDRAM_RPIPE_DELAY_2 ((uint32_t)0x00004000)
+
+#define IS_FMC_READPIPE_DELAY(DELAY) (((DELAY) == FMC_SDRAM_RPIPE_DELAY_0) || \
+ ((DELAY) == FMC_SDRAM_RPIPE_DELAY_1) || \
+ ((DELAY) == FMC_SDRAM_RPIPE_DELAY_2))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_LoadToActive_Delay
+ * @{
+ */
+#define IS_FMC_LOADTOACTIVE_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_ExitSelfRefresh_Delay
+ * @{
+ */
+#define IS_FMC_EXITSELFREFRESH_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_SelfRefresh_Time
+ * @{
+ */
+#define IS_FMC_SELFREFRESH_TIME(TIME) (((TIME) > 0) && ((TIME) <= 16))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_RowCycle_Delay
+ * @{
+ */
+#define IS_FMC_ROWCYCLE_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Write_Recovery_Time
+ * @{
+ */
+#define IS_FMC_WRITE_RECOVERY_TIME(TIME) (((TIME) > 0) && ((TIME) <= 16))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_RP_Delay
+ * @{
+ */
+#define IS_FMC_RP_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_RCD_Delay
+ * @{
+ */
+#define IS_FMC_RCD_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16))
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Command_Mode
+ * @{
+ */
+#define FMC_SDRAM_CMD_NORMAL_MODE ((uint32_t)0x00000000)
+#define FMC_SDRAM_CMD_CLK_ENABLE ((uint32_t)0x00000001)
+#define FMC_SDRAM_CMD_PALL ((uint32_t)0x00000002)
+#define FMC_SDRAM_CMD_AUTOREFRESH_MODE ((uint32_t)0x00000003)
+#define FMC_SDRAM_CMD_LOAD_MODE ((uint32_t)0x00000004)
+#define FMC_SDRAM_CMD_SELFREFRESH_MODE ((uint32_t)0x00000005)
+#define FMC_SDRAM_CMD_POWERDOWN_MODE ((uint32_t)0x00000006)
+
+#define IS_FMC_COMMAND_MODE(COMMAND) (((COMMAND) == FMC_SDRAM_CMD_NORMAL_MODE) || \
+ ((COMMAND) == FMC_SDRAM_CMD_CLK_ENABLE) || \
+ ((COMMAND) == FMC_SDRAM_CMD_PALL) || \
+ ((COMMAND) == FMC_SDRAM_CMD_AUTOREFRESH_MODE) || \
+ ((COMMAND) == FMC_SDRAM_CMD_LOAD_MODE) || \
+ ((COMMAND) == FMC_SDRAM_CMD_SELFREFRESH_MODE) || \
+ ((COMMAND) == FMC_SDRAM_CMD_POWERDOWN_MODE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Command_Target
+ * @{
+ */
+#define FMC_SDRAM_CMD_TARGET_BANK2 FMC_SDCMR_CTB2
+#define FMC_SDRAM_CMD_TARGET_BANK1 FMC_SDCMR_CTB1
+#define FMC_SDRAM_CMD_TARGET_BANK1_2 ((uint32_t)0x00000018)
+
+#define IS_FMC_COMMAND_TARGET(TARGET) (((TARGET) == FMC_SDRAM_CMD_TARGET_BANK1) || \
+ ((TARGET) == FMC_SDRAM_CMD_TARGET_BANK2) || \
+ ((TARGET) == FMC_SDRAM_CMD_TARGET_BANK1_2))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_AutoRefresh_Number
+ * @{
+ */
+#define IS_FMC_AUTOREFRESH_NUMBER(NUMBER) (((NUMBER) > 0) && ((NUMBER) <= 16))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_ModeRegister_Definition
+ * @{
+ */
+#define IS_FMC_MODE_REGISTER(CONTENT) ((CONTENT) <= 8191)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Refresh_rate
+ * @{
+ */
+#define IS_FMC_REFRESH_RATE(RATE) ((RATE) <= 8191)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Mode_Status
+ * @{
+ */
+#define FMC_SDRAM_NORMAL_MODE ((uint32_t)0x00000000)
+#define FMC_SDRAM_SELF_REFRESH_MODE FMC_SDSR_MODES1_0
+#define FMC_SDRAM_POWER_DOWN_MODE FMC_SDSR_MODES1_1
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NORSRAM_Device_Instance
+ * @{
+ */
+#define IS_FMC_NORSRAM_DEVICE(INSTANCE) ((INSTANCE) == FMC_NORSRAM_DEVICE)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NORSRAM_EXTENDED_Device_Instance
+ * @{
+ */
+#define IS_FMC_NORSRAM_EXTENDED_DEVICE(INSTANCE) ((INSTANCE) == FMC_NORSRAM_EXTENDED_DEVICE)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NAND_Device_Instance
+ * @{
+ */
+#define IS_FMC_NAND_DEVICE(INSTANCE) ((INSTANCE) == FMC_NAND_DEVICE)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_PCCARD_Device_Instance
+ * @{
+ */
+#define IS_FMC_PCCARD_DEVICE(INSTANCE) ((INSTANCE) == FMC_PCCARD_DEVICE)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_SDRAM_Device_Instance
+ * @{
+ */
+#define IS_FMC_SDRAM_DEVICE(INSTANCE) ((INSTANCE) == FMC_SDRAM_DEVICE)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Interrupt_definition
+ * @brief FMC Interrupt definition
+ * @{
+ */
+#define FMC_IT_RISING_EDGE ((uint32_t)0x00000008)
+#define FMC_IT_LEVEL ((uint32_t)0x00000010)
+#define FMC_IT_FALLING_EDGE ((uint32_t)0x00000020)
+#define FMC_IT_REFRESH_ERROR ((uint32_t)0x00004000)
+
+#define IS_FMC_IT(IT) ((((IT) & (uint32_t)0xFFFFBFC7) == 0x00000000) && ((IT) != 0x00000000))
+
+#define IS_FMC_GET_IT(IT) (((IT) == FMC_IT_RISING_EDGE) || \
+ ((IT) == FMC_IT_LEVEL) || \
+ ((IT) == FMC_IT_FALLING_EDGE) || \
+ ((IT) == FMC_IT_REFRESH_ERROR))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Flag_definition
+ * @brief FMC Flag definition
+ * @{
+ */
+#define FMC_FLAG_RISING_EDGE ((uint32_t)0x00000001)
+#define FMC_FLAG_LEVEL ((uint32_t)0x00000002)
+#define FMC_FLAG_FALLING_EDGE ((uint32_t)0x00000004)
+#define FMC_FLAG_FEMPT ((uint32_t)0x00000040)
+#define FMC_SDRAM_FLAG_REFRESH_IT FMC_SDSR_RE
+#define FMC_SDRAM_FLAG_BUSY FMC_SDSR_BUSY
+#define FMC_SDRAM_FLAG_REFRESH_ERROR FMC_SDRTR_CRE
+
+#define IS_FMC_GET_FLAG(FLAG) (((FLAG) == FMC_FLAG_RISING_EDGE) || \
+ ((FLAG) == FMC_FLAG_LEVEL) || \
+ ((FLAG) == FMC_FLAG_FALLING_EDGE) || \
+ ((FLAG) == FMC_FLAG_FEMPT) || \
+ ((FLAG) == FMC_SDRAM_FLAG_REFRESH_IT) || \
+ ((FLAG) == FMC_SDRAM_FLAG_BUSY))
+
+#define IS_FMC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFF8) == 0x00000000) && ((FLAG) != 0x00000000))
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup FMC_NOR_Macros
+ * @brief macros to handle NOR device enable/disable and read/write operations
+ * @{
+ */
+
+/**
+ * @brief Enable the NORSRAM device access.
+ * @param __INSTANCE__: FMC_NORSRAM Instance
+ * @param __BANK__: FMC_NORSRAM Bank
+ * @retval None
+ */
+#define __FMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] |= FMC_BCR1_MBKEN)
+
+/**
+ * @brief Disable the NORSRAM device access.
+ * @param __INSTANCE__: FMC_NORSRAM Instance
+ * @param __BANK__: FMC_NORSRAM Bank
+ * @retval None
+ */
+#define __FMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] &= ~FMC_BCR1_MBKEN)
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NAND_Macros
+ * @brief macros to handle NAND device enable/disable
+ * @{
+ */
+
+/**
+ * @brief Enable the NAND device access.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @retval None
+ */
+#define __FMC_NAND_ENABLE(__INSTANCE__, __BANK__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 |= FMC_PCR2_PBKEN): \
+ ((__INSTANCE__)->PCR3 |= FMC_PCR3_PBKEN))
+
+/**
+ * @brief Disable the NAND device access.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @retval None
+ */
+#define __FMC_NAND_DISABLE(__INSTANCE__, __BANK__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 &= ~FMC_PCR2_PBKEN): \
+ ((__INSTANCE__)->PCR3 &= ~FMC_PCR3_PBKEN))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_PCCARD_Macros
+ * @brief macros to handle SRAM read/write operations
+ * @{
+ */
+
+/**
+ * @brief Enable the PCCARD device access.
+ * @param __INSTANCE__: FMC_PCCARD Instance
+ * @retval None
+ */
+#define __FMC_PCCARD_ENABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 |= FMC_PCR4_PBKEN)
+
+/**
+ * @brief Disable the PCCARD device access.
+ * @param __INSTANCE__: FMC_PCCARD Instance
+ * @retval None
+ */
+#define __FMC_PCCARD_DISABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 &= ~FMC_PCR4_PBKEN)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Interrupt
+ * @brief macros to handle FMC interrupts
+ * @{
+ */
+
+/**
+ * @brief Enable the NAND device interrupt.
+ * @param __INSTANCE__: FMC_NAND instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __INTERRUPT__: FMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 |= (__INTERRUPT__)): \
+ ((__INSTANCE__)->SR3 |= (__INTERRUPT__)))
+
+/**
+ * @brief Disable the NAND device interrupt.
+ * @param __INSTANCE__: FMC_NAND handle
+ * @param __BANK__: FMC_NAND Bank
+ * @param __INTERRUPT__: FMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__INTERRUPT__)): \
+ ((__INSTANCE__)->SR3 &= ~(__INTERRUPT__)))
+
+/**
+ * @brief Get flag status of the NAND device.
+ * @param __INSTANCE__: FMC_NAND handle
+ * @param __BANK__: FMC_NAND Bank
+ * @param __FLAG__: FMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FMC_NAND_BANK2)? (((__INSTANCE__)->SR2 &(__FLAG__)) == (__FLAG__)): \
+ (((__INSTANCE__)->SR3 &(__FLAG__)) == (__FLAG__)))
+/**
+ * @brief Clear flag status of the NAND device.
+ * @param __INSTANCE__: FMC_NAND handle
+ * @param __BANK__: FMC_NAND Bank
+ * @param __FLAG__: FMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval None
+ */
+#define __FMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__FLAG__)): \
+ ((__INSTANCE__)->SR3 &= ~(__FLAG__)))
+/**
+ * @brief Enable the PCCARD device interrupt.
+ * @param __INSTANCE__: FMC_PCCARD instance
+ * @param __INTERRUPT__: FMC_PCCARD interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_PCCARD_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the PCCARD device interrupt.
+ * @param __INSTANCE__: FMC_PCCARD instance
+ * @param __INTERRUPT__: FMC_PCCARD interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_PCCARD_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 &= ~(__INTERRUPT__))
+
+/**
+ * @brief Get flag status of the PCCARD device.
+ * @param __INSTANCE__: FMC_PCCARD instance
+ * @param __FLAG__: FMC_PCCARD flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FMC_PCCARD_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SR4 &(__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear flag status of the PCCARD device.
+ * @param __INSTANCE__: FMC_PCCARD instance
+ * @param __FLAG__: FMC_PCCARD flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval None
+ */
+#define __FMC_PCCARD_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SR4 &= ~(__FLAG__))
+
+/**
+ * @brief Enable the SDRAM device interrupt.
+ * @param __INSTANCE__: FMC_SDRAM instance
+ * @param __INTERRUPT__: FMC_SDRAM interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error
+ * @retval None
+ */
+#define __FMC_SDRAM_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SDRTR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the SDRAM device interrupt.
+ * @param __INSTANCE__: FMC_SDRAM instance
+ * @param __INTERRUPT__: FMC_SDRAM interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error
+ * @retval None
+ */
+#define __FMC_SDRAM_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SDRTR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Get flag status of the SDRAM device.
+ * @param __INSTANCE__: FMC_SDRAM instance
+ * @param __FLAG__: FMC_SDRAM flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_SDRAM_FLAG_REFRESH_IT: Interrupt refresh error.
+ * @arg FMC_SDRAM_FLAG_BUSY: SDRAM busy flag.
+ * @arg FMC_SDRAM_FLAG_REFRESH_ERROR: Refresh error flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FMC_SDRAM_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SDSR &(__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear flag status of the SDRAM device.
+ * @param __INSTANCE__: FMC_SDRAM instance
+ * @param __FLAG__: FMC_SDRAM flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_SDRAM_FLAG_REFRESH_ERROR
+ * @retval None
+ */
+#define __FMC_SDRAM_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SDRTR |= (__FLAG__))
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/* FMC_NORSRAM Controller functions *******************************************/
+/* Initialization/de-initialization functions */
+HAL_StatusTypeDef FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode);
+HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank);
+
+/* FMC_NORSRAM Control functions */
+HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+
+/* FMC_NAND Controller functions **********************************************/
+/* Initialization/de-initialization functions */
+HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank);
+
+/* FMC_NAND Control functions */
+HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout);
+
+/* FMC_PCCARD Controller functions ********************************************/
+/* Initialization/de-initialization functions */
+HAL_StatusTypeDef FMC_PCCARD_Init(FMC_PCCARD_TypeDef *Device, FMC_PCCARD_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_PCCARD_CommonSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FMC_PCCARD_AttributeSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FMC_PCCARD_IOSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FMC_PCCARD_DeInit(FMC_PCCARD_TypeDef *Device);
+
+/* FMC_SDRAM Controller functions *********************************************/
+/* Initialization/de-initialization functions */
+HAL_StatusTypeDef FMC_SDRAM_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_SDRAM_Timing_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_SDRAM_DeInit(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+
+/* FMC_SDRAM Control functions */
+HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Enable(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Disable(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_SDRAM_SendCommand(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout);
+HAL_StatusTypeDef FMC_SDRAM_ProgramRefreshRate(FMC_SDRAM_TypeDef *Device, uint32_t RefreshRate);
+HAL_StatusTypeDef FMC_SDRAM_SetAutoRefreshNumber(FMC_SDRAM_TypeDef *Device, uint32_t AutoRefreshNumber);
+uint32_t FMC_SDRAM_GetModeStatus(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
+
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_LL_FMC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_ll_fsmc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1048 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_fsmc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of FSMC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_LL_FSMC_H
+#define __STM32F4xx_LL_FSMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FSMC
+ * @{
+ */
+
+/* Exported typedef ----------------------------------------------------------*/
+#define FSMC_NORSRAM_TypeDef FSMC_Bank1_TypeDef
+#define FSMC_NORSRAM_EXTENDED_TypeDef FSMC_Bank1E_TypeDef
+#define FSMC_NAND_TypeDef FSMC_Bank2_3_TypeDef
+#define FSMC_PCCARD_TypeDef FSMC_Bank4_TypeDef
+
+#define FSMC_NORSRAM_DEVICE FSMC_Bank1
+#define FSMC_NORSRAM_EXTENDED_DEVICE FSMC_Bank1E
+#define FSMC_NAND_DEVICE FSMC_Bank2_3
+#define FSMC_PCCARD_DEVICE FSMC_Bank4
+
+/**
+ * @brief FSMC_NORSRAM Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t NSBank; /*!< Specifies the NORSRAM memory device that will be used.
+ This parameter can be a value of @ref FSMC_NORSRAM_Bank */
+
+ uint32_t DataAddressMux; /*!< Specifies whether the address and data values are
+ multiplexed on the data bus or not.
+ This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing */
+
+ uint32_t MemoryType; /*!< Specifies the type of external memory attached to
+ the corresponding memory device.
+ This parameter can be a value of @ref FSMC_Memory_Type */
+
+ uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be a value of @ref FSMC_NORSRAM_Data_Width */
+
+ uint32_t BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory,
+ valid only with synchronous burst Flash memories.
+ This parameter can be a value of @ref FSMC_Burst_Access_Mode */
+
+ uint32_t WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing
+ the Flash memory in burst mode.
+ This parameter can be a value of @ref FSMC_Wait_Signal_Polarity */
+
+ uint32_t WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash
+ memory, valid only when accessing Flash memories in burst mode.
+ This parameter can be a value of @ref FSMC_Wrap_Mode */
+
+ uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one
+ clock cycle before the wait state or during the wait state,
+ valid only when accessing memories in burst mode.
+ This parameter can be a value of @ref FSMC_Wait_Timing */
+
+ uint32_t WriteOperation; /*!< Enables or disables the write operation in the selected device by the FSMC.
+ This parameter can be a value of @ref FSMC_Write_Operation */
+
+ uint32_t WaitSignal; /*!< Enables or disables the wait state insertion via wait
+ signal, valid for Flash memory access in burst mode.
+ This parameter can be a value of @ref FSMC_Wait_Signal */
+
+ uint32_t ExtendedMode; /*!< Enables or disables the extended mode.
+ This parameter can be a value of @ref FSMC_Extended_Mode */
+
+ uint32_t AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers,
+ valid only with asynchronous Flash memories.
+ This parameter can be a value of @ref FSMC_AsynchronousWait */
+
+ uint32_t WriteBurst; /*!< Enables or disables the write burst operation.
+ This parameter can be a value of @ref FSMC_Write_Burst */
+
+}FSMC_NORSRAM_InitTypeDef;
+
+/**
+ * @brief FSMC_NORSRAM Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t AddressSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address setup time.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+ @note This parameter is not used with synchronous NOR Flash memories. */
+
+ uint32_t AddressHoldTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address hold time.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 15.
+ @note This parameter is not used with synchronous NOR Flash memories. */
+
+ uint32_t DataSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the data setup time.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 255.
+ @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed
+ NOR Flash memories. */
+
+ uint32_t BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure
+ the duration of the bus turnaround.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+ @note This parameter is only used for multiplexed NOR Flash memories. */
+
+ uint32_t CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of
+ HCLK cycles. This parameter can be a value between Min_Data = 2 and Max_Data = 16.
+ @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM
+ accesses. */
+
+ uint32_t DataLatency; /*!< Defines the number of memory clock cycles to issue
+ to the memory before getting the first data.
+ The parameter value depends on the memory type as shown below:
+ - It must be set to 0 in case of a CRAM
+ - It is don't care in asynchronous NOR, SRAM or ROM accesses
+ - It may assume a value between Min_Data = 2 and Max_Data = 17 in NOR Flash memories
+ with synchronous burst mode enable */
+
+ uint32_t AccessMode; /*!< Specifies the asynchronous access mode.
+ This parameter can be a value of @ref FSMC_Access_Mode */
+
+}FSMC_NORSRAM_TimingTypeDef;
+
+/**
+ * @brief FSMC_NAND Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t NandBank; /*!< Specifies the NAND memory device that will be used.
+ This parameter can be a value of @ref FSMC_NAND_Bank */
+
+ uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory device.
+ This parameter can be any value of @ref FSMC_Wait_feature */
+
+ uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be any value of @ref FSMC_NAND_Data_Width */
+
+ uint32_t EccComputation; /*!< Enables or disables the ECC computation.
+ This parameter can be any value of @ref FSMC_ECC */
+
+ uint32_t ECCPageSize; /*!< Defines the page size for the extended ECC.
+ This parameter can be any value of @ref FSMC_ECC_Page_Size */
+
+ uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+}FSMC_NAND_InitTypeDef;
+
+/**
+ * @brief FSMC_NAND_PCCARD Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t SetupTime; /*!< Defines the number of HCLK cycles to setup address before
+ the command assertion for NAND-Flash read or write access
+ to common/Attribute or I/O memory space (depending on
+ the memory space timing to be configured).
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the
+ command for NAND-Flash read or write access to
+ common/Attribute or I/O memory space (depending on the
+ memory space timing to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address
+ (and data for write access) after the command de-assertion
+ for NAND-Flash read or write access to common/Attribute
+ or I/O memory space (depending on the memory space timing
+ to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the
+ data bus is kept in HiZ after the start of a NAND-Flash
+ write access to common/Attribute or I/O memory space (depending
+ on the memory space timing to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+}FSMC_NAND_PCC_TimingTypeDef;
+
+/**
+ * @brief FSMC_NAND Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the PCCARD Memory device.
+ This parameter can be any value of @ref FSMC_Wait_feature */
+
+ uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+}FSMC_PCCARD_InitTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup FSMC_NOR_SRAM_Controller
+ * @{
+ */
+
+/** @defgroup FSMC_NORSRAM_Bank
+ * @{
+ */
+#define FSMC_NORSRAM_BANK1 ((uint32_t)0x00000000)
+#define FSMC_NORSRAM_BANK2 ((uint32_t)0x00000002)
+#define FSMC_NORSRAM_BANK3 ((uint32_t)0x00000004)
+#define FSMC_NORSRAM_BANK4 ((uint32_t)0x00000006)
+
+#define IS_FSMC_NORSRAM_BANK(BANK) (((BANK) == FSMC_NORSRAM_BANK1) || \
+ ((BANK) == FSMC_NORSRAM_BANK2) || \
+ ((BANK) == FSMC_NORSRAM_BANK3) || \
+ ((BANK) == FSMC_NORSRAM_BANK4))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Data_Address_Bus_Multiplexing
+ * @{
+ */
+
+#define FSMC_DATA_ADDRESS_MUX_DISABLE ((uint32_t)0x00000000)
+#define FSMC_DATA_ADDRESS_MUX_ENABLE ((uint32_t)0x00000002)
+
+#define IS_FSMC_MUX(MUX) (((MUX) == FSMC_DATA_ADDRESS_MUX_DISABLE) || \
+ ((MUX) == FSMC_DATA_ADDRESS_MUX_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Memory_Type
+ * @{
+ */
+
+#define FSMC_MEMORY_TYPE_SRAM ((uint32_t)0x00000000)
+#define FSMC_MEMORY_TYPE_PSRAM ((uint32_t)0x00000004)
+#define FSMC_MEMORY_TYPE_NOR ((uint32_t)0x00000008)
+
+
+#define IS_FSMC_MEMORY(MEMORY) (((MEMORY) == FSMC_MEMORY_TYPE_SRAM) || \
+ ((MEMORY) == FSMC_MEMORY_TYPE_PSRAM)|| \
+ ((MEMORY) == FSMC_MEMORY_TYPE_NOR))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_NORSRAM_Data_Width
+ * @{
+ */
+
+#define FSMC_NORSRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000)
+#define FSMC_NORSRAM_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010)
+#define FSMC_NORSRAM_MEM_BUS_WIDTH_32 ((uint32_t)0x00000020)
+
+#define IS_FSMC_NORSRAM_MEMORY_WIDTH(WIDTH) (((WIDTH) == FSMC_NORSRAM_MEM_BUS_WIDTH_8) || \
+ ((WIDTH) == FSMC_NORSRAM_MEM_BUS_WIDTH_16) || \
+ ((WIDTH) == FSMC_NORSRAM_MEM_BUS_WIDTH_32))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_NORSRAM_Flash_Access
+ * @{
+ */
+#define FSMC_NORSRAM_FLASH_ACCESS_ENABLE ((uint32_t)0x00000040)
+#define FSMC_NORSRAM_FLASH_ACCESS_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Burst_Access_Mode
+ * @{
+ */
+
+#define FSMC_BURST_ACCESS_MODE_DISABLE ((uint32_t)0x00000000)
+#define FSMC_BURST_ACCESS_MODE_ENABLE ((uint32_t)0x00000100)
+
+#define IS_FSMC_BURSTMODE(STATE) (((STATE) == FSMC_BURST_ACCESS_MODE_DISABLE) || \
+ ((STATE) == FSMC_BURST_ACCESS_MODE_ENABLE))
+/**
+ * @}
+ */
+
+
+/** @defgroup FSMC_Wait_Signal_Polarity
+ * @{
+ */
+#define FSMC_WAIT_SIGNAL_POLARITY_LOW ((uint32_t)0x00000000)
+#define FSMC_WAIT_SIGNAL_POLARITY_HIGH ((uint32_t)0x00000200)
+
+#define IS_FSMC_WAIT_POLARITY(POLARITY) (((POLARITY) == FSMC_WAIT_SIGNAL_POLARITY_LOW) || \
+ ((POLARITY) == FSMC_WAIT_SIGNAL_POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wrap_Mode
+ * @{
+ */
+#define FSMC_WRAP_MODE_DISABLE ((uint32_t)0x00000000)
+#define FSMC_WRAP_MODE_ENABLE ((uint32_t)0x00000400)
+
+#define IS_FSMC_WRAP_MODE(MODE) (((MODE) == FSMC_WRAP_MODE_DISABLE) || \
+ ((MODE) == FSMC_WRAP_MODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_Timing
+ * @{
+ */
+#define FSMC_WAIT_TIMING_BEFORE_WS ((uint32_t)0x00000000)
+#define FSMC_WAIT_TIMING_DURING_WS ((uint32_t)0x00000800)
+
+#define IS_FSMC_WAIT_SIGNAL_ACTIVE(ACTIVE) (((ACTIVE) == FSMC_WAIT_TIMING_BEFORE_WS) || \
+ ((ACTIVE) == FSMC_WAIT_TIMING_DURING_WS))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Write_Operation
+ * @{
+ */
+#define FSMC_WRITE_OPERATION_DISABLE ((uint32_t)0x00000000)
+#define FSMC_WRITE_OPERATION_ENABLE ((uint32_t)0x00001000)
+
+#define IS_FSMC_WRITE_OPERATION(OPERATION) (((OPERATION) == FSMC_WRITE_OPERATION_DISABLE) || \
+ ((OPERATION) == FSMC_WRITE_OPERATION_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_Signal
+ * @{
+ */
+#define FSMC_WAIT_SIGNAL_DISABLE ((uint32_t)0x00000000)
+#define FSMC_WAIT_SIGNAL_ENABLE ((uint32_t)0x00002000)
+
+#define IS_FSMC_WAITE_SIGNAL(SIGNAL) (((SIGNAL) == FSMC_WAIT_SIGNAL_DISABLE) || \
+ ((SIGNAL) == FSMC_WAIT_SIGNAL_ENABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Extended_Mode
+ * @{
+ */
+#define FSMC_EXTENDED_MODE_DISABLE ((uint32_t)0x00000000)
+#define FSMC_EXTENDED_MODE_ENABLE ((uint32_t)0x00004000)
+
+#define IS_FSMC_EXTENDED_MODE(MODE) (((MODE) == FSMC_EXTENDED_MODE_DISABLE) || \
+ ((MODE) == FSMC_EXTENDED_MODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_AsynchronousWait
+ * @{
+ */
+#define FSMC_ASYNCHRONOUS_WAIT_DISABLE ((uint32_t)0x00000000)
+#define FSMC_ASYNCHRONOUS_WAIT_ENABLE ((uint32_t)0x00008000)
+
+#define IS_FSMC_ASYNWAIT(STATE) (((STATE) == FSMC_ASYNCHRONOUS_WAIT_DISABLE) || \
+ ((STATE) == FSMC_ASYNCHRONOUS_WAIT_ENABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Write_Burst
+ * @{
+ */
+
+#define FSMC_WRITE_BURST_DISABLE ((uint32_t)0x00000000)
+#define FSMC_WRITE_BURST_ENABLE ((uint32_t)0x00080000)
+
+#define IS_FSMC_WRITE_BURST(BURST) (((BURST) == FSMC_WRITE_BURST_DISABLE) || \
+ ((BURST) == FSMC_WRITE_BURST_ENABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Continous_Clock
+ * @{
+ */
+
+#define FSMC_CONTINUOUS_CLOCK_SYNC_ONLY ((uint32_t)0x00000000)
+#define FSMC_CONTINUOUS_CLOCK_SYNC_ASYNC ((uint32_t)0x00100000)
+
+#define IS_FSMC_CONTINOUS_CLOCK(CCLOCK) (((CCLOCK) == FSMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \
+ ((CCLOCK) == FSMC_CONTINUOUS_CLOCK_SYNC_ASYNC))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Address_Setup_Time
+ * @{
+ */
+#define IS_FSMC_ADDRESS_SETUP_TIME(TIME) ((TIME) <= 15)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Address_Hold_Time
+ * @{
+ */
+#define IS_FSMC_ADDRESS_HOLD_TIME(TIME) (((TIME) > 0) && ((TIME) <= 15))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Data_Setup_Time
+ * @{
+ */
+#define IS_FSMC_DATASETUP_TIME(TIME) (((TIME) > 0) && ((TIME) <= 255))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Bus_Turn_around_Duration
+ * @{
+ */
+#define IS_FSMC_TURNAROUND_TIME(TIME) ((TIME) <= 15)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_CLK_Division
+ * @{
+ */
+#define IS_FSMC_CLK_DIV(DIV) (((DIV) > 1) && ((DIV) <= 16))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Data_Latency
+ * @{
+ */
+#define IS_FSMC_DATA_LATENCY(LATENCY) (((LATENCY) > 1) && ((LATENCY) <= 17))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Access_Mode
+ * @{
+ */
+#define FSMC_ACCESS_MODE_A ((uint32_t)0x00000000)
+#define FSMC_ACCESS_MODE_B ((uint32_t)0x10000000)
+#define FSMC_ACCESS_MODE_C ((uint32_t)0x20000000)
+#define FSMC_ACCESS_MODE_D ((uint32_t)0x30000000)
+
+#define IS_FSMC_ACCESS_MODE(MODE) (((MODE) == FSMC_ACCESS_MODE_A) || \
+ ((MODE) == FSMC_ACCESS_MODE_B) || \
+ ((MODE) == FSMC_ACCESS_MODE_C) || \
+ ((MODE) == FSMC_ACCESS_MODE_D))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_NAND_Controller
+ * @{
+ */
+
+/** @defgroup FSMC_NAND_Bank
+ * @{
+ */
+#define FSMC_NAND_BANK2 ((uint32_t)0x00000010)
+#define FSMC_NAND_BANK3 ((uint32_t)0x00000100)
+
+#define IS_FSMC_NAND_BANK(BANK) (((BANK) == FSMC_NAND_BANK2) || \
+ ((BANK) == FSMC_NAND_BANK3))
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_feature
+ * @{
+ */
+#define FSMC_NAND_PCC_WAIT_FEATURE_DISABLE ((uint32_t)0x00000000)
+#define FSMC_NAND_PCC_WAIT_FEATURE_ENABLE ((uint32_t)0x00000002)
+
+#define IS_FSMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FSMC_NAND_PCC_WAIT_FEATURE_DISABLE) || \
+ ((FEATURE) == FSMC_NAND_PCC_WAIT_FEATURE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_PCR_Memory_Type
+ * @{
+ */
+#define FSMC_PCR_MEMORY_TYPE_PCCARD ((uint32_t)0x00000000)
+#define FSMC_PCR_MEMORY_TYPE_NAND ((uint32_t)0x00000008)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_NAND_Data_Width
+ * @{
+ */
+#define FSMC_NAND_PCC_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000)
+#define FSMC_NAND_PCC_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010)
+
+#define IS_FSMC_NAND_MEMORY_WIDTH(WIDTH) (((WIDTH) == FSMC_NAND_PCC_MEM_BUS_WIDTH_8) || \
+ ((WIDTH) == FSMC_NAND_PCC_MEM_BUS_WIDTH_16))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_ECC
+ * @{
+ */
+#define FSMC_NAND_ECC_DISABLE ((uint32_t)0x00000000)
+#define FSMC_NAND_ECC_ENABLE ((uint32_t)0x00000040)
+
+#define IS_FSMC_ECC_STATE(STATE) (((STATE) == FSMC_NAND_ECC_DISABLE) || \
+ ((STATE) == FSMC_NAND_ECC_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_ECC_Page_Size
+ * @{
+ */
+#define FSMC_NAND_ECC_PAGE_SIZE_256BYTE ((uint32_t)0x00000000)
+#define FSMC_NAND_ECC_PAGE_SIZE_512BYTE ((uint32_t)0x00020000)
+#define FSMC_NAND_ECC_PAGE_SIZE_1024BYTE ((uint32_t)0x00040000)
+#define FSMC_NAND_ECC_PAGE_SIZE_2048BYTE ((uint32_t)0x00060000)
+#define FSMC_NAND_ECC_PAGE_SIZE_4096BYTE ((uint32_t)0x00080000)
+#define FSMC_NAND_ECC_PAGE_SIZE_8192BYTE ((uint32_t)0x000A0000)
+
+#define IS_FSMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_256BYTE) || \
+ ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_512BYTE) || \
+ ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \
+ ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \
+ ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \
+ ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_8192BYTE))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_TCLR_Setup_Time
+ * @{
+ */
+#define IS_FSMC_TCLR_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_TAR_Setup_Time
+ * @{
+ */
+#define IS_FSMC_TAR_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Setup_Time
+ * @{
+ */
+#define IS_FSMC_SETUP_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Wait_Setup_Time
+ * @{
+ */
+#define IS_FSMC_WAIT_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Hold_Setup_Time
+ * @{
+ */
+#define IS_FSMC_HOLD_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_HiZ_Setup_Time
+ * @{
+ */
+#define IS_FSMC_HIZ_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup FSMC_NORSRAM_Device_Instance
+ * @{
+ */
+#define IS_FSMC_NORSRAM_DEVICE(INSTANCE) ((INSTANCE) == FSMC_NORSRAM_DEVICE)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_NORSRAM_EXTENDED_Device_Instance
+ * @{
+ */
+#define IS_FSMC_NORSRAM_EXTENDED_DEVICE(INSTANCE) ((INSTANCE) == FSMC_NORSRAM_EXTENDED_DEVICE)
+
+/**
+ * @}
+ */
+
+ /** @defgroup FSMC_NAND_Device_Instance
+ * @{
+ */
+#define IS_FSMC_NAND_DEVICE(INSTANCE) ((INSTANCE) == FSMC_NAND_DEVICE)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_PCCARD_Device_Instance
+ * @{
+ */
+#define IS_FSMC_PCCARD_DEVICE(INSTANCE) ((INSTANCE) == FSMC_PCCARD_DEVICE)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Interrupt_definition
+ * @brief FSMC Interrupt definition
+ * @{
+ */
+#define FSMC_IT_RISING_EDGE ((uint32_t)0x00000008)
+#define FSMC_IT_LEVEL ((uint32_t)0x00000010)
+#define FSMC_IT_FALLING_EDGE ((uint32_t)0x00000020)
+#define FSMC_IT_REFRESH_ERROR ((uint32_t)0x00004000)
+
+#define IS_FSMC_IT(IT) ((((IT) & (uint32_t)0xFFFFBFC7) == 0x00000000) && ((IT) != 0x00000000))
+#define IS_FSMC_GET_IT(IT) (((IT) == FSMC_IT_RISING_EDGE) || \
+ ((IT) == FSMC_IT_LEVEL) || \
+ ((IT) == FSMC_IT_FALLING_EDGE) || \
+ ((IT) == FSMC_IT_REFRESH_ERROR))
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Flag_definition
+ * @brief FSMC Flag definition
+ * @{
+ */
+#define FSMC_FLAG_RISING_EDGE ((uint32_t)0x00000001)
+#define FSMC_FLAG_LEVEL ((uint32_t)0x00000002)
+#define FSMC_FLAG_FALLING_EDGE ((uint32_t)0x00000004)
+#define FSMC_FLAG_FEMPT ((uint32_t)0x00000040)
+
+#define IS_FSMC_GET_FLAG(FLAG) (((FLAG) == FSMC_FLAG_RISING_EDGE) || \
+ ((FLAG) == FSMC_FLAG_LEVEL) || \
+ ((FLAG) == FSMC_FLAG_FALLING_EDGE) || \
+ ((FLAG) == FSMC_FLAG_FEMPT))
+
+#define IS_FSMC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFF8) == 0x00000000) && ((FLAG) != 0x00000000))
+
+
+/**
+ * @}
+ */
+
+
+/* Exported macro ------------------------------------------------------------*/
+
+
+/** @defgroup FSMC_NOR_Macros
+ * @brief macros to handle NOR device enable/disable and read/write operations
+ * @{
+ */
+
+/**
+ * @brief Enable the NORSRAM device access.
+ * @param __INSTANCE__: FSMC_NORSRAM Instance
+ * @param __BANK__: FSMC_NORSRAM Bank
+ * @retval none
+ */
+#define __FSMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] |= FSMC_BCR1_MBKEN)
+
+/**
+ * @brief Disable the NORSRAM device access.
+ * @param __INSTANCE__: FSMC_NORSRAM Instance
+ * @param __BANK__: FSMC_NORSRAM Bank
+ * @retval none
+ */
+#define __FSMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] &= ~FSMC_BCR1_MBKEN)
+
+/**
+ * @}
+ */
+
+
+/** @defgroup FSMC_NAND_Macros
+ * @brief macros to handle NAND device enable/disable
+ * @{
+ */
+
+/**
+ * @brief Enable the NAND device access.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__: FSMC_NAND Bank
+ * @retval none
+ */
+#define __FSMC_NAND_ENABLE(__INSTANCE__, __BANK__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 |= FSMC_PCR2_PBKEN): \
+ ((__INSTANCE__)->PCR3 |= FSMC_PCR3_PBKEN))
+
+
+/**
+ * @brief Disable the NAND device access.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__: FSMC_NAND Bank
+ * @retval none
+ */
+#define __FSMC_NAND_DISABLE(__INSTANCE__, __BANK__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 &= ~FSMC_PCR2_PBKEN): \
+ ((__INSTANCE__)->PCR3 &= ~FSMC_PCR3_PBKEN))
+
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_PCCARD_Macros
+ * @brief macros to handle SRAM read/write operations
+ * @{
+ */
+
+/**
+ * @brief Enable the PCCARD device access.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @retval none
+ */
+#define __FSMC_PCCARD_ENABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 |= FSMC_PCR4_PBKEN)
+
+/**
+ * @brief Disable the PCCARD device access.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @retval none
+ */
+#define __FSMC_PCCARD_DISABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 &= ~FSMC_PCR4_PBKEN)
+
+/**
+ * @}
+ */
+
+/** @defgroup FSMC_Interrupt
+ * @brief macros to handle FSMC interrupts
+ * @{
+ */
+
+/**
+ * @brief Enable the NAND device interrupt.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__: FSMC_NAND Bank
+ * @param __INTERRUPT__: FSMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FSMC_IT_LEVEL: Interrupt level.
+ * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FSMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 |= (__INTERRUPT__)): \
+ ((__INSTANCE__)->SR3 |= (__INTERRUPT__)))
+
+/**
+ * @brief Disable the NAND device interrupt.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__: FSMC_NAND Bank
+ * @param __INTERRUPT__: FSMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FSMC_IT_LEVEL: Interrupt level.
+ * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FSMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__INTERRUPT__)): \
+ ((__INSTANCE__)->SR3 &= ~(__INTERRUPT__)))
+
+/**
+ * @brief Get flag status of the NAND device.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__: FSMC_NAND Bank
+ * @param __FLAG__: FSMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FSMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FSMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FSMC_NAND_BANK2)? (((__INSTANCE__)->SR2 &(__FLAG__)) == (__FLAG__)): \
+ (((__INSTANCE__)->SR3 &(__FLAG__)) == (__FLAG__)))
+/**
+ * @brief Clear flag status of the NAND device.
+ * @param __INSTANCE__: FSMC_NAND Instance
+ * @param __BANK__: FSMC_NAND Bank
+ * @param __FLAG__: FSMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FSMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval None
+ */
+#define __FSMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__FLAG__)): \
+ ((__INSTANCE__)->SR3 &= ~(__FLAG__)))
+/**
+ * @brief Enable the PCCARD device interrupt.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @param __INTERRUPT__: FSMC_PCCARD interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FSMC_IT_LEVEL: Interrupt level.
+ * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FSMC_PCCARD_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the PCCARD device interrupt.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @param __INTERRUPT__: FSMC_PCCARD interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FSMC_IT_LEVEL: Interrupt level.
+ * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FSMC_PCCARD_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 &= ~(__INTERRUPT__))
+
+/**
+ * @brief Get flag status of the PCCARD device.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @param __FLAG__: FSMC_PCCARD flag
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FSMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FSMC_PCCARD_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SR4 &(__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear flag status of the PCCARD device.
+ * @param __INSTANCE__: FSMC_PCCARD Instance
+ * @param __FLAG__: FSMC_PCCARD flag
+ * This parameter can be any combination of the following values:
+ * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FSMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval None
+ */
+#define __FSMC_PCCARD_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SR4 &= ~(__FLAG__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/* FSMC_NORSRAM Controller functions ******************************************/
+/* Initialization/de-initialization functions */
+HAL_StatusTypeDef FSMC_NORSRAM_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_InitTypeDef *Init);
+HAL_StatusTypeDef FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode);
+HAL_StatusTypeDef FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank);
+
+/* FSMC_NORSRAM Control functions */
+HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Enable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+
+/* FSMC_NAND Controller functions *********************************************/
+/* Initialization/de-initialization functions */
+HAL_StatusTypeDef FSMC_NAND_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_InitTypeDef *Init);
+HAL_StatusTypeDef FSMC_NAND_CommonSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NAND_AttributeSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NAND_DeInit(FSMC_NAND_TypeDef *Device, uint32_t Bank);
+
+/* FSMC_NAND Control functions */
+HAL_StatusTypeDef FSMC_NAND_ECC_Enable(FSMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NAND_ECC_Disable(FSMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FSMC_NAND_GetECC(FSMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout);
+
+/* FSMC_PCCARD Controller functions *******************************************/
+/* Initialization/de-initialization functions */
+HAL_StatusTypeDef FSMC_PCCARD_Init(FSMC_PCCARD_TypeDef *Device, FSMC_PCCARD_InitTypeDef *Init);
+HAL_StatusTypeDef FSMC_PCCARD_CommonSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FSMC_PCCARD_AttributeSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FSMC_PCCARD_IOSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FSMC_PCCARD_DeInit(FSMC_PCCARD_TypeDef *Device);
+
+/* FSMC APIs, macros and typedefs redefinition */
+#define FMC_NORSRAM_TypeDef FSMC_NORSRAM_TypeDef
+#define FMC_NORSRAM_EXTENDED_TypeDef FSMC_NORSRAM_EXTENDED_TypeDef
+#define FMC_NORSRAM_InitTypeDef FSMC_NORSRAM_InitTypeDef
+#define FMC_NORSRAM_TimingTypeDef FSMC_NORSRAM_TimingTypeDef
+
+#define FMC_NORSRAM_Init FSMC_NORSRAM_Init
+#define FMC_NORSRAM_Timing_Init FSMC_NORSRAM_Timing_Init
+#define FMC_NORSRAM_Extended_Timing_Init FSMC_NORSRAM_Extended_Timing_Init
+#define FMC_NORSRAM_DeInit FSMC_NORSRAM_DeInit
+#define FMC_NORSRAM_WriteOperation_Enable FSMC_NORSRAM_WriteOperation_Enable
+#define FMC_NORSRAM_WriteOperation_Disable FSMC_NORSRAM_WriteOperation_Disable
+
+#define __FMC_NORSRAM_ENABLE __FSMC_NORSRAM_ENABLE
+#define __FMC_NORSRAM_DISABLE __FSMC_NORSRAM_DISABLE
+
+#define FMC_NAND_InitTypeDef FSMC_NAND_InitTypeDef
+#define FMC_PCCARD_InitTypeDef FSMC_PCCARD_InitTypeDef
+#define FMC_NAND_PCC_TimingTypeDef FSMC_NAND_PCC_TimingTypeDef
+
+#define FMC_NAND_Init FSMC_NAND_Init
+#define FMC_NAND_CommonSpace_Timing_Init FSMC_NAND_CommonSpace_Timing_Init
+#define FMC_NAND_AttributeSpace_Timing_Init FSMC_NAND_AttributeSpace_Timing_Init
+#define FMC_NAND_DeInit FSMC_NAND_DeInit
+#define FMC_NAND_ECC_Enable FSMC_NAND_ECC_Enable
+#define FMC_NAND_ECC_Disable FSMC_NAND_ECC_Disable
+#define FMC_NAND_GetECC FSMC_NAND_GetECC
+#define FMC_PCCARD_Init FSMC_PCCARD_Init
+#define FMC_PCCARD_CommonSpace_Timing_Init FSMC_PCCARD_CommonSpace_Timing_Init
+#define FMC_PCCARD_AttributeSpace_Timing_Init FSMC_PCCARD_AttributeSpace_Timing_Init
+#define FMC_PCCARD_IOSpace_Timing_Init FSMC_PCCARD_IOSpace_Timing_Init
+#define FMC_PCCARD_DeInit FSMC_PCCARD_DeInit
+
+#define __FMC_NAND_ENABLE __FSMC_NAND_ENABLE
+#define __FMC_NAND_DISABLE __FSMC_NAND_DISABLE
+#define __FMC_PCCARD_ENABLE __FSMC_PCCARD_ENABLE
+#define __FMC_PCCARD_DISABLE __FSMC_PCCARD_DISABLE
+#define __FMC_NAND_ENABLE_IT __FSMC_NAND_ENABLE_IT
+#define __FMC_NAND_DISABLE_IT __FSMC_NAND_DISABLE_IT
+#define __FMC_NAND_GET_FLAG __FSMC_NAND_GET_FLAG
+#define __FMC_NAND_CLEAR_FLAG __FSMC_NAND_CLEAR_FLAG
+#define __FMC_PCCARD_ENABLE_IT __FSMC_PCCARD_ENABLE_IT
+#define __FMC_PCCARD_DISABLE_IT __FSMC_PCCARD_DISABLE_IT
+#define __FMC_PCCARD_GET_FLAG __FSMC_PCCARD_GET_FLAG
+#define __FMC_PCCARD_CLEAR_FLAG __FSMC_PCCARD_CLEAR_FLAG
+
+#define FMC_NORSRAM_TypeDef FSMC_NORSRAM_TypeDef
+#define FMC_NORSRAM_EXTENDED_TypeDef FSMC_NORSRAM_EXTENDED_TypeDef
+#define FMC_NAND_TypeDef FSMC_NAND_TypeDef
+#define FMC_PCCARD_TypeDef FSMC_PCCARD_TypeDef
+
+#define FMC_NORSRAM_DEVICE FSMC_NORSRAM_DEVICE
+#define FMC_NORSRAM_EXTENDED_DEVICE FSMC_NORSRAM_EXTENDED_DEVICE
+#define FMC_NAND_DEVICE FSMC_NAND_DEVICE
+#define FMC_PCCARD_DEVICE FSMC_PCCARD_DEVICE
+
+#define FMC_NAND_BANK2 FSMC_NAND_BANK2
+
+#define FMC_NORSRAM_BANK1 FSMC_NORSRAM_BANK1
+#define FMC_NORSRAM_BANK2 FSMC_NORSRAM_BANK2
+#define FMC_NORSRAM_BANK3 FSMC_NORSRAM_BANK3
+
+#define FMC_IT_RISING_EDGE FSMC_IT_RISING_EDGE
+#define FMC_IT_LEVEL FSMC_IT_LEVEL
+#define FMC_IT_FALLING_EDGE FSMC_IT_FALLING_EDGE
+#define FMC_IT_REFRESH_ERROR FSMC_IT_REFRESH_ERROR
+
+#define FMC_FLAG_RISING_EDGE FSMC_FLAG_RISING_EDGE
+#define FMC_FLAG_LEVEL FSMC_FLAG_LEVEL
+#define FMC_FLAG_FALLING_EDGE FSMC_FLAG_FALLING_EDGE
+#define FMC_FLAG_FEMPT FSMC_FLAG_FEMPT
+
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_LL_FSMC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_ll_sdmmc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,973 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_sdmmc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of SDMMC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_LL_SDMMC_H
+#define __STM32F4xx_LL_SDMMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_Driver
+ * @{
+ */
+
+/** @addtogroup SDMMC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup SDIO_Exported_Types SDIO Exported Types
+ * @{
+ */
+
+/**
+ * @brief SDMMC Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockEdge; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref SDIO_Clock_Edge */
+
+ uint32_t ClockBypass; /*!< Specifies whether the SDIO Clock divider bypass is
+ enabled or disabled.
+ This parameter can be a value of @ref SDIO_Clock_Bypass */
+
+ uint32_t ClockPowerSave; /*!< Specifies whether SDIO Clock output is enabled or
+ disabled when the bus is idle.
+ This parameter can be a value of @ref SDIO_Clock_Power_Save */
+
+ uint32_t BusWide; /*!< Specifies the SDIO bus width.
+ This parameter can be a value of @ref SDIO_Bus_Wide */
+
+ uint32_t HardwareFlowControl; /*!< Specifies whether the SDIO hardware flow control is enabled or disabled.
+ This parameter can be a value of @ref SDIO_Hardware_Flow_Control */
+
+ uint32_t ClockDiv; /*!< Specifies the clock frequency of the SDIO controller.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+}SDIO_InitTypeDef;
+
+
+/**
+ * @brief SDIO Command Control structure
+ */
+typedef struct
+{
+ uint32_t Argument; /*!< Specifies the SDIO command argument which is sent
+ to a card as part of a command message. If a command
+ contains an argument, it must be loaded into this register
+ before writing the command to the command register. */
+
+ uint32_t CmdIndex; /*!< Specifies the SDIO command index. It must be Min_Data = 0 and
+ Max_Data = 64 */
+
+ uint32_t Response; /*!< Specifies the SDIO response type.
+ This parameter can be a value of @ref SDIO_Response_Type */
+
+ uint32_t WaitForInterrupt; /*!< Specifies whether SDIO wait for interrupt request is
+ enabled or disabled.
+ This parameter can be a value of @ref SDIO_Wait_Interrupt_State */
+
+ uint32_t CPSM; /*!< Specifies whether SDIO Command path state machine (CPSM)
+ is enabled or disabled.
+ This parameter can be a value of @ref SDIO_CPSM_State */
+}SDIO_CmdInitTypeDef;
+
+
+/**
+ * @brief SDIO Data Control structure
+ */
+typedef struct
+{
+ uint32_t DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */
+
+ uint32_t DataLength; /*!< Specifies the number of data bytes to be transferred. */
+
+ uint32_t DataBlockSize; /*!< Specifies the data block size for block transfer.
+ This parameter can be a value of @ref SDIO_Data_Block_Size */
+
+ uint32_t TransferDir; /*!< Specifies the data transfer direction, whether the transfer
+ is a read or write.
+ This parameter can be a value of @ref SDIO_Transfer_Direction */
+
+ uint32_t TransferMode; /*!< Specifies whether data transfer is in stream or block mode.
+ This parameter can be a value of @ref SDIO_Transfer_Type */
+
+ uint32_t DPSM; /*!< Specifies whether SDIO Data path state machine (DPSM)
+ is enabled or disabled.
+ This parameter can be a value of @ref SDIO_DPSM_State */
+}SDIO_DataInitTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup SDIO_Exported_Constants
+ * @{
+ */
+
+/** @defgroup SDIO_Clock_Edge
+ * @{
+ */
+#define SDIO_CLOCK_EDGE_RISING ((uint32_t)0x00000000)
+#define SDIO_CLOCK_EDGE_FALLING SDIO_CLKCR_NEGEDGE
+
+#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_CLOCK_EDGE_RISING) || \
+ ((EDGE) == SDIO_CLOCK_EDGE_FALLING))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Clock_Bypass
+ * @{
+ */
+#define SDIO_CLOCK_BYPASS_DISABLE ((uint32_t)0x00000000)
+#define SDIO_CLOCK_BYPASS_ENABLE SDIO_CLKCR_BYPASS
+
+#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_CLOCK_BYPASS_DISABLE) || \
+ ((BYPASS) == SDIO_CLOCK_BYPASS_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Clock_Power_Save
+ * @{
+ */
+#define SDIO_CLOCK_POWER_SAVE_DISABLE ((uint32_t)0x00000000)
+#define SDIO_CLOCK_POWER_SAVE_ENABLE SDIO_CLKCR_PWRSAV
+
+#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_CLOCK_POWER_SAVE_DISABLE) || \
+ ((SAVE) == SDIO_CLOCK_POWER_SAVE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Bus_Wide
+ * @{
+ */
+#define SDIO_BUS_WIDE_1B ((uint32_t)0x00000000)
+#define SDIO_BUS_WIDE_4B SDIO_CLKCR_WIDBUS_0
+#define SDIO_BUS_WIDE_8B SDIO_CLKCR_WIDBUS_1
+
+#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BUS_WIDE_1B) || \
+ ((WIDE) == SDIO_BUS_WIDE_4B) || \
+ ((WIDE) == SDIO_BUS_WIDE_8B))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Hardware_Flow_Control
+ * @{
+ */
+#define SDIO_HARDWARE_FLOW_CONTROL_DISABLE ((uint32_t)0x00000000)
+#define SDIO_HARDWARE_FLOW_CONTROL_ENABLE SDIO_CLKCR_HWFC_EN
+
+#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_DISABLE) || \
+ ((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Clock_Division
+ * @{
+ */
+#define IS_SDIO_CLKDIV(DIV) ((DIV) <= 0xFF)
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Command_Index
+ * @{
+ */
+#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40)
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Response_Type
+ * @{
+ */
+#define SDIO_RESPONSE_NO ((uint32_t)0x00000000)
+#define SDIO_RESPONSE_SHORT SDIO_CMD_WAITRESP_0
+#define SDIO_RESPONSE_LONG SDIO_CMD_WAITRESP
+
+#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_RESPONSE_NO) || \
+ ((RESPONSE) == SDIO_RESPONSE_SHORT) || \
+ ((RESPONSE) == SDIO_RESPONSE_LONG))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Wait_Interrupt_State
+ * @{
+ */
+#define SDIO_WAIT_NO ((uint32_t)0x00000000)
+#define SDIO_WAIT_IT SDIO_CMD_WAITINT
+#define SDIO_WAIT_PEND SDIO_CMD_WAITPEND
+
+#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_WAIT_NO) || \
+ ((WAIT) == SDIO_WAIT_IT) || \
+ ((WAIT) == SDIO_WAIT_PEND))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_CPSM_State
+ * @{
+ */
+#define SDIO_CPSM_DISABLE ((uint32_t)0x00000000)
+#define SDIO_CPSM_ENABLE SDIO_CMD_CPSMEN
+
+#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_DISABLE) || \
+ ((CPSM) == SDIO_CPSM_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Response_Registers
+ * @{
+ */
+#define SDIO_RESP1 ((uint32_t)0x00000000)
+#define SDIO_RESP2 ((uint32_t)0x00000004)
+#define SDIO_RESP3 ((uint32_t)0x00000008)
+#define SDIO_RESP4 ((uint32_t)0x0000000C)
+
+#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || \
+ ((RESP) == SDIO_RESP2) || \
+ ((RESP) == SDIO_RESP3) || \
+ ((RESP) == SDIO_RESP4))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Data_Length
+ * @{
+ */
+#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF)
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Data_Block_Size
+ * @{
+ */
+#define SDIO_DATABLOCK_SIZE_1B ((uint32_t)0x00000000)
+#define SDIO_DATABLOCK_SIZE_2B SDIO_DCTRL_DBLOCKSIZE_0
+#define SDIO_DATABLOCK_SIZE_4B SDIO_DCTRL_DBLOCKSIZE_1
+#define SDIO_DATABLOCK_SIZE_8B ((uint32_t)0x00000030)
+#define SDIO_DATABLOCK_SIZE_16B SDIO_DCTRL_DBLOCKSIZE_2
+#define SDIO_DATABLOCK_SIZE_32B ((uint32_t)0x00000050)
+#define SDIO_DATABLOCK_SIZE_64B ((uint32_t)0x00000060)
+#define SDIO_DATABLOCK_SIZE_128B ((uint32_t)0x00000070)
+#define SDIO_DATABLOCK_SIZE_256B SDIO_DCTRL_DBLOCKSIZE_3
+#define SDIO_DATABLOCK_SIZE_512B ((uint32_t)0x00000090)
+#define SDIO_DATABLOCK_SIZE_1024B ((uint32_t)0x000000A0)
+#define SDIO_DATABLOCK_SIZE_2048B ((uint32_t)0x000000B0)
+#define SDIO_DATABLOCK_SIZE_4096B ((uint32_t)0x000000C0)
+#define SDIO_DATABLOCK_SIZE_8192B ((uint32_t)0x000000D0)
+#define SDIO_DATABLOCK_SIZE_16384B ((uint32_t)0x000000E0)
+
+#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DATABLOCK_SIZE_1B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_2B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_4B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_8B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_16B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_32B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_64B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_128B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_256B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_512B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_1024B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_2048B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_4096B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_8192B) || \
+ ((SIZE) == SDIO_DATABLOCK_SIZE_16384B))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Transfer_Direction
+ * @{
+ */
+#define SDIO_TRANSFER_DIR_TO_CARD ((uint32_t)0x00000000)
+#define SDIO_TRANSFER_DIR_TO_SDIO SDIO_DCTRL_DTDIR
+
+#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TRANSFER_DIR_TO_CARD) || \
+ ((DIR) == SDIO_TRANSFER_DIR_TO_SDIO))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Transfer_Type
+ * @{
+ */
+#define SDIO_TRANSFER_MODE_BLOCK ((uint32_t)0x00000000)
+#define SDIO_TRANSFER_MODE_STREAM SDIO_DCTRL_DTMODE
+
+#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TRANSFER_MODE_BLOCK) || \
+ ((MODE) == SDIO_TRANSFER_MODE_STREAM))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_DPSM_State
+ * @{
+ */
+#define SDIO_DPSM_DISABLE ((uint32_t)0x00000000)
+#define SDIO_DPSM_ENABLE SDIO_DCTRL_DTEN
+
+#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_DISABLE) ||\
+ ((DPSM) == SDIO_DPSM_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Read_Wait_Mode
+ * @{
+ */
+#define SDIO_READ_WAIT_MODE_CLK ((uint32_t)0x00000000)
+#define SDIO_READ_WAIT_MODE_DATA2 ((uint32_t)0x00000001)
+
+#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_READ_WAIT_MODE_CLK) || \
+ ((MODE) == SDIO_READ_WAIT_MODE_DATA2))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Interrupt_sources
+ * @{
+ */
+#define SDIO_IT_CCRCFAIL SDIO_STA_CCRCFAIL
+#define SDIO_IT_DCRCFAIL SDIO_STA_DCRCFAIL
+#define SDIO_IT_CTIMEOUT SDIO_STA_CTIMEOUT
+#define SDIO_IT_DTIMEOUT SDIO_STA_DTIMEOUT
+#define SDIO_IT_TXUNDERR SDIO_STA_TXUNDERR
+#define SDIO_IT_RXOVERR SDIO_STA_RXOVERR
+#define SDIO_IT_CMDREND SDIO_STA_CMDREND
+#define SDIO_IT_CMDSENT SDIO_STA_CMDSENT
+#define SDIO_IT_DATAEND SDIO_STA_DATAEND
+#define SDIO_IT_STBITERR SDIO_STA_STBITERR
+#define SDIO_IT_DBCKEND SDIO_STA_DBCKEND
+#define SDIO_IT_CMDACT SDIO_STA_CMDACT
+#define SDIO_IT_TXACT SDIO_STA_TXACT
+#define SDIO_IT_RXACT SDIO_STA_RXACT
+#define SDIO_IT_TXFIFOHE SDIO_STA_TXFIFOHE
+#define SDIO_IT_RXFIFOHF SDIO_STA_RXFIFOHF
+#define SDIO_IT_TXFIFOF SDIO_STA_TXFIFOF
+#define SDIO_IT_RXFIFOF SDIO_STA_RXFIFOF
+#define SDIO_IT_TXFIFOE SDIO_STA_TXFIFOE
+#define SDIO_IT_RXFIFOE SDIO_STA_RXFIFOE
+#define SDIO_IT_TXDAVL SDIO_STA_TXDAVL
+#define SDIO_IT_RXDAVL SDIO_STA_RXDAVL
+#define SDIO_IT_SDIOIT SDIO_STA_SDIOIT
+#define SDIO_IT_CEATAEND SDIO_STA_CEATAEND
+
+#define IS_SDIO_IT(IT) ((((IT) & (uint32_t)0xFF000000) == 0x00) && ((IT) != (uint32_t)0x00))
+/**
+ * @}
+ */
+
+/** @defgroup SDIO_Flags
+ * @{
+ */
+#define SDIO_FLAG_CCRCFAIL SDIO_STA_CCRCFAIL
+#define SDIO_FLAG_DCRCFAIL SDIO_STA_DCRCFAIL
+#define SDIO_FLAG_CTIMEOUT SDIO_STA_CTIMEOUT
+#define SDIO_FLAG_DTIMEOUT SDIO_STA_DTIMEOUT
+#define SDIO_FLAG_TXUNDERR SDIO_STA_TXUNDERR
+#define SDIO_FLAG_RXOVERR SDIO_STA_RXOVERR
+#define SDIO_FLAG_CMDREND SDIO_STA_CMDREND
+#define SDIO_FLAG_CMDSENT SDIO_STA_CMDSENT
+#define SDIO_FLAG_DATAEND SDIO_STA_DATAEND
+#define SDIO_FLAG_STBITERR SDIO_STA_STBITERR
+#define SDIO_FLAG_DBCKEND SDIO_STA_DBCKEND
+#define SDIO_FLAG_CMDACT SDIO_STA_CMDACT
+#define SDIO_FLAG_TXACT SDIO_STA_TXACT
+#define SDIO_FLAG_RXACT SDIO_STA_RXACT
+#define SDIO_FLAG_TXFIFOHE SDIO_STA_TXFIFOHE
+#define SDIO_FLAG_RXFIFOHF SDIO_STA_RXFIFOHF
+#define SDIO_FLAG_TXFIFOF SDIO_STA_TXFIFOF
+#define SDIO_FLAG_RXFIFOF SDIO_STA_RXFIFOF
+#define SDIO_FLAG_TXFIFOE SDIO_STA_TXFIFOE
+#define SDIO_FLAG_RXFIFOE SDIO_STA_RXFIFOE
+#define SDIO_FLAG_TXDAVL SDIO_STA_TXDAVL
+#define SDIO_FLAG_RXDAVL SDIO_STA_RXDAVL
+#define SDIO_FLAG_SDIOIT SDIO_STA_SDIOIT
+#define SDIO_FLAG_CEATAEND SDIO_STA_CEATAEND
+
+#define IS_SDIO_FLAG(FLAG) (((FLAG) == SDIO_FLAG_CCRCFAIL) || \
+ ((FLAG) == SDIO_FLAG_DCRCFAIL) || \
+ ((FLAG) == SDIO_FLAG_CTIMEOUT) || \
+ ((FLAG) == SDIO_FLAG_DTIMEOUT) || \
+ ((FLAG) == SDIO_FLAG_TXUNDERR) || \
+ ((FLAG) == SDIO_FLAG_RXOVERR) || \
+ ((FLAG) == SDIO_FLAG_CMDREND) || \
+ ((FLAG) == SDIO_FLAG_CMDSENT) || \
+ ((FLAG) == SDIO_FLAG_DATAEND) || \
+ ((FLAG) == SDIO_FLAG_STBITERR) || \
+ ((FLAG) == SDIO_FLAG_DBCKEND) || \
+ ((FLAG) == SDIO_FLAG_CMDACT) || \
+ ((FLAG) == SDIO_FLAG_TXACT) || \
+ ((FLAG) == SDIO_FLAG_RXACT) || \
+ ((FLAG) == SDIO_FLAG_TXFIFOHE) || \
+ ((FLAG) == SDIO_FLAG_RXFIFOHF) || \
+ ((FLAG) == SDIO_FLAG_TXFIFOF) || \
+ ((FLAG) == SDIO_FLAG_RXFIFOF) || \
+ ((FLAG) == SDIO_FLAG_TXFIFOE) || \
+ ((FLAG) == SDIO_FLAG_RXFIFOE) || \
+ ((FLAG) == SDIO_FLAG_TXDAVL) || \
+ ((FLAG) == SDIO_FLAG_RXDAVL) || \
+ ((FLAG) == SDIO_FLAG_SDIOIT) || \
+ ((FLAG) == SDIO_FLAG_CEATAEND))
+
+#define IS_SDIO_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFF3FF800) == 0x00) && ((FLAG) != (uint32_t)0x00))
+
+#define IS_SDIO_GET_IT(IT) (((IT) == SDIO_IT_CCRCFAIL) || \
+ ((IT) == SDIO_IT_DCRCFAIL) || \
+ ((IT) == SDIO_IT_CTIMEOUT) || \
+ ((IT) == SDIO_IT_DTIMEOUT) || \
+ ((IT) == SDIO_IT_TXUNDERR) || \
+ ((IT) == SDIO_IT_RXOVERR) || \
+ ((IT) == SDIO_IT_CMDREND) || \
+ ((IT) == SDIO_IT_CMDSENT) || \
+ ((IT) == SDIO_IT_DATAEND) || \
+ ((IT) == SDIO_IT_STBITERR) || \
+ ((IT) == SDIO_IT_DBCKEND) || \
+ ((IT) == SDIO_IT_CMDACT) || \
+ ((IT) == SDIO_IT_TXACT) || \
+ ((IT) == SDIO_IT_RXACT) || \
+ ((IT) == SDIO_IT_TXFIFOHE) || \
+ ((IT) == SDIO_IT_RXFIFOHF) || \
+ ((IT) == SDIO_IT_TXFIFOF) || \
+ ((IT) == SDIO_IT_RXFIFOF) || \
+ ((IT) == SDIO_IT_TXFIFOE) || \
+ ((IT) == SDIO_IT_RXFIFOE) || \
+ ((IT) == SDIO_IT_TXDAVL) || \
+ ((IT) == SDIO_IT_RXDAVL) || \
+ ((IT) == SDIO_IT_SDIOIT) || \
+ ((IT) == SDIO_IT_CEATAEND))
+
+#define IS_SDIO_CLEAR_IT(IT) ((((IT) & (uint32_t)0xFF3FF800) == 0x00) && ((IT) != (uint32_t)0x00))
+
+/**
+ * @}
+ */
+
+
+/** @defgroup SDIO_Instance_definition
+ * @{
+ */
+#define IS_SDIO_ALL_INSTANCE(INSTANCE) ((INSTANCE) == SDIO)
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* ------------ SDIO registers bit address in the alias region -------------- */
+#define SDIO_OFFSET (SDIO_BASE - PERIPH_BASE)
+
+/* --- CLKCR Register ---*/
+/* Alias word address of CLKEN bit */
+#define CLKCR_OFFSET (SDIO_OFFSET + 0x04)
+#define CLKEN_BitNumber 0x08
+#define CLKCR_CLKEN_BB (PERIPH_BB_BASE + (CLKCR_OFFSET * 32) + (CLKEN_BitNumber * 4))
+
+/* --- CMD Register ---*/
+/* Alias word address of SDIOSUSPEND bit */
+#define CMD_OFFSET (SDIO_OFFSET + 0x0C)
+#define SDIOSUSPEND_BitNumber 0x0B
+#define CMD_SDIOSUSPEND_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (SDIOSUSPEND_BitNumber * 4))
+
+/* Alias word address of ENCMDCOMPL bit */
+#define ENCMDCOMPL_BitNumber 0x0C
+#define CMD_ENCMDCOMPL_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ENCMDCOMPL_BitNumber * 4))
+
+/* Alias word address of NIEN bit */
+#define NIEN_BitNumber 0x0D
+#define CMD_NIEN_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (NIEN_BitNumber * 4))
+
+/* Alias word address of ATACMD bit */
+#define ATACMD_BitNumber 0x0E
+#define CMD_ATACMD_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ATACMD_BitNumber * 4))
+
+/* --- DCTRL Register ---*/
+/* Alias word address of DMAEN bit */
+#define DCTRL_OFFSET (SDIO_OFFSET + 0x2C)
+#define DMAEN_BitNumber 0x03
+#define DCTRL_DMAEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (DMAEN_BitNumber * 4))
+
+/* Alias word address of RWSTART bit */
+#define RWSTART_BitNumber 0x08
+#define DCTRL_RWSTART_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTART_BitNumber * 4))
+
+/* Alias word address of RWSTOP bit */
+#define RWSTOP_BitNumber 0x09
+#define DCTRL_RWSTOP_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTOP_BitNumber * 4))
+
+/* Alias word address of RWMOD bit */
+#define RWMOD_BitNumber 0x0A
+#define DCTRL_RWMOD_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWMOD_BitNumber * 4))
+
+/* Alias word address of SDIOEN bit */
+#define SDIOEN_BitNumber 0x0B
+#define DCTRL_SDIOEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (SDIOEN_BitNumber * 4))
+
+/* ---------------------- SDIO registers bit mask --------------------------- */
+/* --- CLKCR Register ---*/
+/* CLKCR register clear mask */
+#define CLKCR_CLEAR_MASK ((uint32_t)(SDIO_CLKCR_CLKDIV | SDIO_CLKCR_PWRSAV |\
+ SDIO_CLKCR_BYPASS | SDIO_CLKCR_WIDBUS |\
+ SDIO_CLKCR_NEGEDGE | SDIO_CLKCR_HWFC_EN))
+
+/* --- PWRCTRL Register ---*/
+/* --- DCTRL Register ---*/
+/* SDIO DCTRL Clear Mask */
+#define DCTRL_CLEAR_MASK ((uint32_t)(SDIO_DCTRL_DTEN | SDIO_DCTRL_DTDIR |\
+ SDIO_DCTRL_DTMODE | SDIO_DCTRL_DBLOCKSIZE))
+
+/* --- CMD Register ---*/
+/* CMD Register clear mask */
+#define CMD_CLEAR_MASK ((uint32_t)(SDIO_CMD_CMDINDEX | SDIO_CMD_WAITRESP |\
+ SDIO_CMD_WAITINT | SDIO_CMD_WAITPEND |\
+ SDIO_CMD_CPSMEN | SDIO_CMD_SDIOSUSPEND))
+
+/* SDIO RESP Registers Address */
+#define SDIO_RESP_ADDR ((uint32_t)(SDIO_BASE + 0x14))
+
+/* SDIO Intialization Frequency (400KHz max) */
+#define SDIO_INIT_CLK_DIV ((uint8_t)0x76)
+
+/* SDIO Data Transfer Frequency (25MHz max) */
+#define SDIO_TRANSFER_CLK_DIV ((uint8_t)0x0)
+
+/** @defgroup SDIO_Interrupt_Clock
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+
+/**
+ * @brief Enable the SDIO device.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_ENABLE() (*(__IO uint32_t *)CLKCR_CLKEN_BB = ENABLE)
+
+/**
+ * @brief Disable the SDIO device.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_DISABLE() (*(__IO uint32_t *)CLKCR_CLKEN_BB = DISABLE)
+
+/**
+ * @brief Enable the SDIO DMA transfer.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_DMA_ENABLE() (*(__IO uint32_t *)DCTRL_DMAEN_BB = ENABLE)
+
+/**
+ * @brief Disable the SDIO DMA transfer.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_DMA_DISABLE() (*(__IO uint32_t *)DCTRL_DMAEN_BB = DISABLE)
+
+/**
+ * @brief Enable the SDIO device interrupt.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __INTERRUPT__ : specifies the SDIO interrupt sources to be enabled.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval None
+ */
+#define __SDIO_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the SDIO device interrupt.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __INTERRUPT__ : specifies the SDIO interrupt sources to be disabled.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval None
+ */
+#define __SDIO_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK &= ~(__INTERRUPT__))
+
+/**
+ * @brief Checks whether the specified SDIO flag is set or not.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDIO_FLAG_DTIMEOUT: Data timeout
+ * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
+ * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode.
+ * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDIO_FLAG_CMDACT: Command transfer in progress
+ * @arg SDIO_FLAG_TXACT: Data transmit in progress
+ * @arg SDIO_FLAG_RXACT: Data receive in progress
+ * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty
+ * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full
+ * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full
+ * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full
+ * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty
+ * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty
+ * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO
+ * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO
+ * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval The new state of SDIO_FLAG (SET or RESET).
+ */
+#define __SDIO_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->STA &(__FLAG__)) != RESET)
+
+
+/**
+ * @brief Clears the SDIO pending flags.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDIO_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDIO_FLAG_DTIMEOUT: Data timeout
+ * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDIO_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero)
+ * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode
+ * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received
+ * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval None
+ */
+#define __SDIO_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->ICR = (__FLAG__))
+
+/**
+ * @brief Checks whether the specified SDIO interrupt has occurred or not.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __INTERRUPT__: specifies the SDIO interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt
+ * @arg SDIO_IT_TXACT: Data transmit in progress interrupt
+ * @arg SDIO_IT_RXACT: Data receive in progress interrupt
+ * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt
+ * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt
+ * @retval The new state of SDIO_IT (SET or RESET).
+ */
+#define __SDIO_GET_IT (__INSTANCE__, __INTERRUPT__) (((__INSTANCE__)->STA &(__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+ * @brief Clears the SDIO's interrupt pending bits.
+ * @param __INSTANCE__ : Pointer to SDIO register base
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDIO_IT_DATAEND: Data end (data counter, SDIO_DCOUNT, is zero) interrupt
+ * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide
+ * bus mode interrupt
+ * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt
+ * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61
+ * @retval None
+ */
+#define __SDIO_CLEAR_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->ICR = (__INTERRUPT__))
+
+/**
+ * @brief Enable Start the SD I/O Read Wait operation.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_START_READWAIT_ENABLE() (*(__IO uint32_t *) DCTRL_RWSTART_BB = ENABLE)
+
+/**
+ * @brief Disable Start the SD I/O Read Wait operations.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_START_READWAIT_DISABLE() (*(__IO uint32_t *) DCTRL_RWSTART_BB = DISABLE)
+
+/**
+ * @brief Enable Start the SD I/O Read Wait operation.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_STOP_READWAIT_ENABLE() (*(__IO uint32_t *) DCTRL_RWSTOP_BB = ENABLE)
+
+/**
+ * @brief Disable Stop the SD I/O Read Wait operations.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_STOP_READWAIT_DISABLE() (*(__IO uint32_t *) DCTRL_RWSTOP_BB = DISABLE)
+
+/**
+ * @brief Enable the SD I/O Mode Operation.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_OPERATION_ENABLE() (*(__IO uint32_t *) DCTRL_SDIOEN_BB = ENABLE)
+
+/**
+ * @brief Disable the SD I/O Mode Operation.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_OPERATION_DISABLE() (*(__IO uint32_t *) DCTRL_SDIOEN_BB = DISABLE)
+
+/**
+ * @brief Enable the SD I/O Suspend command sending.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_SUSPEND_CMD_ENABLE() (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = ENABLE)
+
+/**
+ * @brief Disable the SD I/O Suspend command sending.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_SUSPEND_CMD_DISABLE() (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = DISABLE)
+
+/**
+ * @brief Enable the command completion signal.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_CEATA_CMD_COMPLETION_ENABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = ENABLE)
+
+/**
+ * @brief Disable the command completion signal.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_CEATA_CMD_COMPLETION_DISABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = DISABLE)
+
+/**
+ * @brief Enable the CE-ATA interrupt.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_CEATA_ENABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)0)
+
+/**
+ * @brief Disable the CE-ATA interrupt.
+ * @param None
+ * @retval None
+ */
+#define __SDIO_CEATA_DISABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)1)
+
+/**
+ * @brief Enable send CE-ATA command (CMD61).
+ * @param None
+ * @retval None
+ */
+#define __SDIO_CEATA_SENDCMD_ENABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = ENABLE)
+
+/**
+ * @brief Disable send CE-ATA command (CMD61).
+ * @param None
+ * @retval None
+ */
+#define __SDIO_CEATA_SENDCMD_DISABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = DISABLE)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SDIO_Exported_Functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions **********************************/
+/** @addtogroup HAL_SDIO_Group1
+ * @{
+ */
+HAL_StatusTypeDef SDIO_Init(SDIO_TypeDef *SDIOx, SDIO_InitTypeDef Init);
+/**
+ * @}
+ */
+
+/* I/O operation functions *****************************************************/
+/** @addtogroup HAL_SDIO_Group2
+ * @{
+ */
+/* Blocking mode: Polling */
+uint32_t SDIO_ReadFIFO(SDIO_TypeDef *SDIOx);
+HAL_StatusTypeDef SDIO_WriteFIFO(SDIO_TypeDef *SDIOx, uint32_t *pWriteData);
+/**
+ * @}
+ */
+
+/* Peripheral Control functions ************************************************/
+/** @addtogroup HAL_SDIO_Group3
+ * @{
+ */
+HAL_StatusTypeDef SDIO_PowerState_ON(SDIO_TypeDef *SDIOx);
+HAL_StatusTypeDef SDIO_PowerState_OFF(SDIO_TypeDef *SDIOx);
+uint32_t SDIO_GetPowerState(SDIO_TypeDef *SDIOx);
+
+/* Command path state machine (CPSM) management functions */
+HAL_StatusTypeDef SDIO_SendCommand(SDIO_TypeDef *SDIOx, SDIO_CmdInitTypeDef *SDIO_CmdInitStruct);
+uint8_t SDIO_GetCommandResponse(SDIO_TypeDef *SDIOx);
+uint32_t SDIO_GetResponse(uint32_t SDIO_RESP);
+
+/* Data path state machine (DPSM) management functions */
+HAL_StatusTypeDef SDIO_DataConfig(SDIO_TypeDef *SDIOx, SDIO_DataInitTypeDef* SDIO_DataInitStruct);
+uint32_t SDIO_GetDataCounter(SDIO_TypeDef *SDIOx);
+uint32_t SDIO_GetFIFOCount(SDIO_TypeDef *SDIOx);
+
+/* SDIO IO Cards mode management functions */
+HAL_StatusTypeDef SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_LL_SDMMC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/stm32f4xx_ll_usb.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,459 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_ll_usb.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 19-June-2014
+ * @brief Header file of USB Core HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_LL_USB_H
+#define __STM32F4xx_LL_USB_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL
+ * @{
+ */
+
+/** @addtogroup USB_Core
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief USB Mode definition
+ */
+typedef enum
+{
+ USB_OTG_DEVICE_MODE = 0,
+ USB_OTG_HOST_MODE = 1,
+ USB_OTG_DRD_MODE = 2
+
+}USB_OTG_ModeTypeDef;
+
+/**
+ * @brief URB States definition
+ */
+typedef enum {
+ URB_IDLE = 0,
+ URB_DONE,
+ URB_NOTREADY,
+ URB_NYET,
+ URB_ERROR,
+ URB_STALL
+
+}USB_OTG_URBStateTypeDef;
+
+/**
+ * @brief Host channel States definition
+ */
+typedef enum {
+ HC_IDLE = 0,
+ HC_XFRC,
+ HC_HALTED,
+ HC_NAK,
+ HC_NYET,
+ HC_STALL,
+ HC_XACTERR,
+ HC_BBLERR,
+ HC_DATATGLERR
+
+}USB_OTG_HCStateTypeDef;
+
+/**
+ * @brief PCD Initialization Structure definition
+ */
+typedef struct
+{
+ uint32_t dev_endpoints; /*!< Device Endpoints number.
+ This parameter depends on the used USB core.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint32_t Host_channels; /*!< Host Channels number.
+ This parameter Depends on the used USB core.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint32_t speed; /*!< USB Core speed.
+ This parameter can be any value of @ref USB_Core_Speed_ */
+
+ uint32_t dma_enable; /*!< Enable or disable of the USB embedded DMA. */
+
+ uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size.
+ This parameter can be any value of @ref USB_EP0_MPS_ */
+
+ uint32_t phy_itface; /*!< Select the used PHY interface.
+ This parameter can be any value of @ref USB_Core_PHY_ */
+
+ uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */
+
+ uint32_t low_power_enable; /*!< Enable or disable the low power mode. */
+
+ uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */
+
+ uint32_t use_dedicated_ep1; /*!< Enable or disable the use of the dedicated EP1 interrupt. */
+
+ uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */
+
+}USB_OTG_CfgTypeDef;
+
+typedef struct
+{
+ uint8_t num; /*!< Endpoint number
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint8_t is_in; /*!< Endpoint direction
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t is_stall; /*!< Endpoint stall condition
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t type; /*!< Endpoint type
+ This parameter can be any value of @ref USB_EP_Type_ */
+
+ uint8_t data_pid_start; /*!< Initial data PID
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t even_odd_frame; /*!< IFrame parity
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint16_t tx_fifo_num; /*!< Transmission FIFO number
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint32_t maxpacket; /*!< Endpoint Max packet size
+ This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
+
+ uint8_t *xfer_buff; /*!< Pointer to transfer buffer */
+
+ uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */
+
+ uint32_t xfer_len; /*!< Current transfer length */
+
+ uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */
+
+}USB_OTG_EPTypeDef;
+
+typedef struct
+{
+ uint8_t dev_addr ; /*!< USB device address.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 255 */
+
+ uint8_t ch_num; /*!< Host channel number.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint8_t ep_num; /*!< Endpoint number.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint8_t ep_is_in; /*!< Endpoint direction
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t speed; /*!< USB Host speed.
+ This parameter can be any value of @ref USB_Core_Speed_ */
+
+ uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */
+
+ uint8_t process_ping; /*!< Execute the PING protocol for HS mode. */
+
+ uint8_t ep_type; /*!< Endpoint Type.
+ This parameter can be any value of @ref USB_EP_Type_ */
+
+ uint16_t max_packet; /*!< Endpoint Max packet size.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
+
+ uint8_t data_pid; /*!< Initial data PID.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */
+
+ uint32_t xfer_len; /*!< Current transfer length. */
+
+ uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */
+
+ uint8_t toggle_in; /*!< IN transfer current toggle flag.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t toggle_out; /*!< OUT transfer current toggle flag
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */
+
+ uint32_t ErrCnt; /*!< Host channel error count.*/
+
+ USB_OTG_URBStateTypeDef urb_state; /*!< URB state.
+ This parameter can be any value of @ref USB_OTG_URBStateTypeDef */
+
+ USB_OTG_HCStateTypeDef state; /*!< Host Channel state.
+ This parameter can be any value of @ref USB_OTG_HCStateTypeDef */
+
+}USB_OTG_HCTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup PCD_Exported_Constants
+ * @{
+ */
+
+/** @defgroup USB_Core_Mode_
+ * @{
+ */
+#define USB_OTG_MODE_DEVICE 0
+#define USB_OTG_MODE_HOST 1
+#define USB_OTG_MODE_DRD 2
+/**
+ * @}
+ */
+
+/** @defgroup USB_Core_Speed_
+ * @{
+ */
+#define USB_OTG_SPEED_HIGH 0
+#define USB_OTG_SPEED_HIGH_IN_FULL 1
+#define USB_OTG_SPEED_LOW 2
+#define USB_OTG_SPEED_FULL 3
+/**
+ * @}
+ */
+
+/** @defgroup USB_Core_PHY_
+ * @{
+ */
+#define USB_OTG_ULPI_PHY 1
+#define USB_OTG_EMBEDDED_PHY 2
+/**
+ * @}
+ */
+
+/** @defgroup USB_Core_MPS_
+ * @{
+ */
+#define USB_OTG_HS_MAX_PACKET_SIZE 512
+#define USB_OTG_FS_MAX_PACKET_SIZE 64
+#define USB_OTG_MAX_EP0_SIZE 64
+/**
+ * @}
+ */
+
+/** @defgroup USB_Core_Phy_Frequency_
+ * @{
+ */
+#define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ (0 << 1)
+#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1 << 1)
+#define DSTS_ENUMSPD_LS_PHY_6MHZ (2 << 1)
+#define DSTS_ENUMSPD_FS_PHY_48MHZ (3 << 1)
+/**
+ * @}
+ */
+
+/** @defgroup USB_CORE_Frame_Interval_
+ * @{
+ */
+#define DCFG_FRAME_INTERVAL_80 0
+#define DCFG_FRAME_INTERVAL_85 1
+#define DCFG_FRAME_INTERVAL_90 2
+#define DCFG_FRAME_INTERVAL_95 3
+/**
+ * @}
+ */
+
+/** @defgroup USB_EP0_MPS_
+ * @{
+ */
+#define DEP0CTL_MPS_64 0
+#define DEP0CTL_MPS_32 1
+#define DEP0CTL_MPS_16 2
+#define DEP0CTL_MPS_8 3
+/**
+ * @}
+ */
+
+/** @defgroup USB_EP_Speed_
+ * @{
+ */
+#define EP_SPEED_LOW 0
+#define EP_SPEED_FULL 1
+#define EP_SPEED_HIGH 2
+/**
+ * @}
+ */
+
+/** @defgroup USB_EP_Type_
+ * @{
+ */
+#define EP_TYPE_CTRL 0
+#define EP_TYPE_ISOC 1
+#define EP_TYPE_BULK 2
+#define EP_TYPE_INTR 3
+#define EP_TYPE_MSK 3
+/**
+ * @}
+ */
+
+/** @defgroup USB_STS_Defines_
+ * @{
+ */
+#define STS_GOUT_NAK 1
+#define STS_DATA_UPDT 2
+#define STS_XFER_COMP 3
+#define STS_SETUP_COMP 4
+#define STS_SETUP_UPDT 6
+/**
+ * @}
+ */
+
+/** @defgroup HCFG_SPEED_Defines_
+ * @{
+ */
+#define HCFG_30_60_MHZ 0
+#define HCFG_48_MHZ 1
+#define HCFG_6_MHZ 2
+/**
+ * @}
+ */
+
+/** @defgroup HPRT0_PRTSPD_SPEED_Defines_
+ * @{
+ */
+#define HPRT0_PRTSPD_HIGH_SPEED 0
+#define HPRT0_PRTSPD_FULL_SPEED 1
+#define HPRT0_PRTSPD_LOW_SPEED 2
+/**
+ * @}
+ */
+
+#define HCCHAR_CTRL 0
+#define HCCHAR_ISOC 1
+#define HCCHAR_BULK 2
+#define HCCHAR_INTR 3
+
+#define HC_PID_DATA0 0
+#define HC_PID_DATA2 1
+#define HC_PID_DATA1 2
+#define HC_PID_SETUP 3
+
+#define GRXSTS_PKTSTS_IN 2
+#define GRXSTS_PKTSTS_IN_XFER_COMP 3
+#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5
+#define GRXSTS_PKTSTS_CH_HALTED 7
+
+#define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_PCGCCTL_BASE)
+#define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_HOST_PORT_BASE)
+
+#define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)((uint32_t )USBx + USB_OTG_DEVICE_BASE))
+#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)((uint32_t)USBx + USB_OTG_IN_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
+#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)((uint32_t)USBx + USB_OTG_OUT_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE))
+#define USBx_DFIFO(i) *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_FIFO_BASE + (i) * USB_OTG_FIFO_SIZE)
+
+#define USBx_HOST ((USB_OTG_HostTypeDef *)((uint32_t )USBx + USB_OTG_HOST_BASE))
+#define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)((uint32_t)USBx + USB_OTG_HOST_CHANNEL_BASE + (i)*USB_OTG_HOST_CHANNEL_SIZE))
+
+/* Exported macro ------------------------------------------------------------*/
+#define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__))
+#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__))
+
+#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__))
+#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__))
+
+/* Exported functions --------------------------------------------------------*/
+HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init);
+HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init);
+HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_OTG_ModeTypeDef mode);
+HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed);
+HAL_StatusTypeDef USB_FlushRxFifo (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num );
+HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma);
+HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma);
+HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len, uint8_t dma);
+void * USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len);
+HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep);
+HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address);
+HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup);
+uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum);
+uint32_t USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum);
+void USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt);
+
+HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg);
+HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq);
+HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state);
+uint32_t USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx);
+uint32_t USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx,
+ uint8_t ch_num,
+ uint8_t epnum,
+ uint8_t dev_address,
+ uint8_t speed,
+ uint8_t ep_type,
+ uint16_t mps);
+HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma);
+uint32_t USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx);
+HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num);
+HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num);
+HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_LL_USB_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MTS_MDOT_F411RE/system_stm32f4xx.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,124 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f4xx.h
+ * @author MCD Application Team
+ * @version V2.1.0
+ * @date 19-June-2014
+ * @brief CMSIS Cortex-M4 Device System Source File for STM32F4xx devices.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f4xx_system
+ * @{
+ */
+
+/**
+ * @brief Define to prevent recursive inclusion
+ */
+#ifndef __SYSTEM_STM32F4XX_H
+#define __SYSTEM_STM32F4XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32F4xx_System_Includes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup STM32F4xx_System_Exported_types
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetSysClockFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Exported_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F4xx_System_Exported_Functions
+ * @{
+ */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+extern void SetSysClock(void);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F4XX_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- a/TARGET_NRF51822/TARGET_NORDIC/TARGET_MCU_NRF51822/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NRF51822/TARGET_NORDIC/TARGET_MCU_NRF51822/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -45,6 +45,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_NRF51822/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NRF51822/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NRF51822/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NRF51822/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NRF51822/TOOLCHAIN_ARM_STD/startup_nRF51822.o has changed
Binary file TARGET_NRF51822/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NRF51822/TOOLCHAIN_ARM_STD/system_nrf51822.o has changed
Binary file TARGET_NRF51822/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_NRF51822/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_NRF51822/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NRF51822/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_NRF51822/TOOLCHAIN_GCC_ARM/system_nrf51822.o has changed
--- a/TARGET_NRF51822/nrf51.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NRF51822/nrf51.h Tue Feb 03 15:31:20 2015 +0000 @@ -376,7 +376,8 @@ __IO uint32_t EVENTS_RXTO; /*!< Receiver timeout. */ __I uint32_t RESERVED5[46]; __IO uint32_t SHORTS; /*!< Shortcuts for TWI. */ - __I uint32_t RESERVED6[64]; + __I uint32_t RESERVED6[63]; + __IO uint32_t INTEN; /*!< Interrupt enable register. */ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ __I uint32_t RESERVED7[93]; @@ -1213,4 +1214,3 @@ #endif /* nRF51_H */ -
--- a/TARGET_NRF51_DK/TARGET_NORDIC/TARGET_MCU_NRF51822/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NRF51_DK/TARGET_NORDIC/TARGET_MCU_NRF51822/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -45,6 +45,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_NRF51_DK/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NRF51_DK/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NRF51_DK/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NRF51_DK/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NRF51_DK/TOOLCHAIN_ARM_STD/startup_nRF51822.o has changed
Binary file TARGET_NRF51_DK/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NRF51_DK/TOOLCHAIN_ARM_STD/system_nrf51822.o has changed
Binary file TARGET_NRF51_DK/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_NRF51_DK/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_NRF51_DK/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NRF51_DK/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_NRF51_DK/TOOLCHAIN_GCC_ARM/system_nrf51822.o has changed
--- a/TARGET_NRF51_DK/nrf51.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NRF51_DK/nrf51.h Tue Feb 03 15:31:20 2015 +0000 @@ -376,7 +376,8 @@ __IO uint32_t EVENTS_RXTO; /*!< Receiver timeout. */ __I uint32_t RESERVED5[46]; __IO uint32_t SHORTS; /*!< Shortcuts for TWI. */ - __I uint32_t RESERVED6[64]; + __I uint32_t RESERVED6[63]; + __IO uint32_t INTEN; /*!< Interrupt enable register. */ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ __I uint32_t RESERVED7[93]; @@ -1213,4 +1214,3 @@ #endif /* nRF51_H */ -
--- a/TARGET_NRF51_DONGLE/TARGET_NORDIC/TARGET_MCU_NRF51822/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NRF51_DONGLE/TARGET_NORDIC/TARGET_MCU_NRF51822/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -45,6 +45,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_NRF51_DONGLE/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NRF51_DONGLE/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NRF51_DONGLE/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NRF51_DONGLE/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NRF51_DONGLE/TOOLCHAIN_ARM_STD/startup_nRF51822.o has changed
Binary file TARGET_NRF51_DONGLE/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NRF51_DONGLE/TOOLCHAIN_ARM_STD/system_nrf51822.o has changed
Binary file TARGET_NRF51_DONGLE/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_NRF51_DONGLE/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_NRF51_DONGLE/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NRF51_DONGLE/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_NRF51_DONGLE/TOOLCHAIN_GCC_ARM/system_nrf51822.o has changed
--- a/TARGET_NRF51_DONGLE/nrf51.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NRF51_DONGLE/nrf51.h Tue Feb 03 15:31:20 2015 +0000 @@ -376,7 +376,8 @@ __IO uint32_t EVENTS_RXTO; /*!< Receiver timeout. */ __I uint32_t RESERVED5[46]; __IO uint32_t SHORTS; /*!< Shortcuts for TWI. */ - __I uint32_t RESERVED6[64]; + __I uint32_t RESERVED6[63]; + __IO uint32_t INTEN; /*!< Interrupt enable register. */ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ __I uint32_t RESERVED7[93]; @@ -1213,4 +1214,3 @@ #endif /* nRF51_H */ -
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_F030R8/TARGET_STM/TARGET_NUCLEO_F030R8/PeripheralPins.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,62 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_PERIPHERALPINS_H +#define MBED_PERIPHERALPINS_H + +#include "pinmap.h" +#include "PeripheralNames.h" + +//*** ADC *** + +extern const PinMap PinMap_ADC[]; + +//*** I2C *** + +extern const PinMap PinMap_I2C_SDA[]; +extern const PinMap PinMap_I2C_SCL[]; + +//*** PWM *** + +extern const PinMap PinMap_PWM[]; + +//*** SERIAL *** + +extern const PinMap PinMap_UART_TX[]; +extern const PinMap PinMap_UART_RX[]; + +//*** SPI *** + +extern const PinMap PinMap_SPI_MOSI[]; +extern const PinMap PinMap_SPI_MISO[]; +extern const PinMap PinMap_SPI_SCLK[]; +extern const PinMap PinMap_SPI_SSEL[]; + +#endif
--- a/TARGET_NUCLEO_F030R8/TARGET_STM/TARGET_NUCLEO_F030R8/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/TARGET_STM/TARGET_NUCLEO_F030R8/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -64,6 +64,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/startup_stm32f030x8.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_MICRO/system_stm32f0xx.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/startup_stm32f030x8.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_ARM_STD/system_stm32f0xx.o has changed
--- a/TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/NUCLEO_F030R8.ld Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,155 +0,0 @@
-/* Linker script to configure memory regions. */
-MEMORY
-{
- FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64k
- RAM (xrw) : ORIGIN = 0x200000C0, LENGTH = 8k - 0x0C0
-}
-
-/* Linker script to place sections and symbol values. Should be used together
- * with other linker script that defines memory regions FLASH and RAM.
- * It references following symbols, which must be defined in code:
- * Reset_Handler : Entry of reset handler
- *
- * It defines following symbols, which code can use without definition:
- * __exidx_start
- * __exidx_end
- * __etext
- * __data_start__
- * __preinit_array_start
- * __preinit_array_end
- * __init_array_start
- * __init_array_end
- * __fini_array_start
- * __fini_array_end
- * __data_end__
- * __bss_start__
- * __bss_end__
- * __end__
- * end
- * __HeapLimit
- * __StackLimit
- * __StackTop
- * __stack
- * _estack
- */
-ENTRY(Reset_Handler)
-
-SECTIONS
-{
- .text :
- {
- KEEP(*(.isr_vector))
- *(.text*)
-
- KEEP(*(.init))
- KEEP(*(.fini))
-
- /* .ctors */
- *crtbegin.o(.ctors)
- *crtbegin?.o(.ctors)
- *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
- *(SORT(.ctors.*))
- *(.ctors)
-
- /* .dtors */
- *crtbegin.o(.dtors)
- *crtbegin?.o(.dtors)
- *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
- *(SORT(.dtors.*))
- *(.dtors)
-
- *(.rodata*)
-
- KEEP(*(.eh_frame*))
- } > FLASH
-
- .ARM.extab :
- {
- *(.ARM.extab* .gnu.linkonce.armextab.*)
- } > FLASH
-
- __exidx_start = .;
- .ARM.exidx :
- {
- *(.ARM.exidx* .gnu.linkonce.armexidx.*)
- } > FLASH
- __exidx_end = .;
-
- __etext = .;
- _sidata = .;
-
- .data : AT (__etext)
- {
- __data_start__ = .;
- _sdata = .;
- *(vtable)
- *(.data*)
-
- . = ALIGN(4);
- /* preinit data */
- PROVIDE_HIDDEN (__preinit_array_start = .);
- KEEP(*(.preinit_array))
- PROVIDE_HIDDEN (__preinit_array_end = .);
-
- . = ALIGN(4);
- /* init data */
- PROVIDE_HIDDEN (__init_array_start = .);
- KEEP(*(SORT(.init_array.*)))
- KEEP(*(.init_array))
- PROVIDE_HIDDEN (__init_array_end = .);
-
-
- . = ALIGN(4);
- /* finit data */
- PROVIDE_HIDDEN (__fini_array_start = .);
- KEEP(*(SORT(.fini_array.*)))
- KEEP(*(.fini_array))
- PROVIDE_HIDDEN (__fini_array_end = .);
-
- KEEP(*(.jcr*))
- . = ALIGN(4);
- /* All data end */
- __data_end__ = .;
- _edata = .;
-
- } > RAM
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start__ = .;
- _sbss = .;
- *(.bss*)
- *(COMMON)
- . = ALIGN(4);
- __bss_end__ = .;
- _ebss = .;
- } > RAM
-
- .heap (COPY):
- {
- __end__ = .;
- end = __end__;
- *(.heap*)
- __HeapLimit = .;
- } > RAM
-
- /* .stack_dummy section doesn't contains any symbols. It is only
- * used for linker to calculate size of stack sections, and assign
- * values to stack symbols later */
- .stack_dummy (COPY):
- {
- *(.stack*)
- } > RAM
-
- /* Set stack top to end of RAM, and stack limit move down by
- * size of stack_dummy section */
- __StackTop = ORIGIN(RAM) + LENGTH(RAM);
- _estack = __StackTop;
- __StackLimit = __StackTop - SIZEOF(.stack_dummy);
- PROVIDE(__stack = __StackTop);
-
- /* Check if data + heap + stack exceeds RAM limit */
- ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
-}
-
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/STM32F030X8.ld Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,153 @@
+/* Linker script to configure memory regions. */
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64k
+ RAM (xrw) : ORIGIN = 0x200000C0, LENGTH = 8k - 0x0C0
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ * _estack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.isr_vector))
+ *(.text*)
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+ _sidata = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ _sdata = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ KEEP(*(.jcr*))
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+ _edata = .;
+
+ } > RAM
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start__ = .;
+ _sbss = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ _ebss = .;
+ } > RAM
+
+ .heap (COPY):
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy (COPY):
+ {
+ *(.stack*)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ _estack = __StackTop;
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/startup_stm32f030x8.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_GCC_ARM/system_stm32f0xx.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/startup_stm32f030x8.o has changed
--- a/TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f030x8.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f030x8.icf Tue Feb 03 15:31:20 2015 +0000
@@ -15,8 +15,8 @@
define region RAM_region = mem:[from __region_RAM_start__ to __region_RAM_end__];
/* Stack and Heap */
-define symbol __size_cstack__ = 0x400;
-define symbol __size_heap__ = 0x400;
+define symbol __size_cstack__ = 0x800;
+define symbol __size_heap__ = 0x800;
define block CSTACK with alignment = 8, size = __size_cstack__ { };
define block HEAP with alignment = 8, size = __size_heap__ { };
define block STACKHEAP with fixed order { block HEAP, block CSTACK };
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/system_stm32f0xx.o has changed
--- a/TARGET_NUCLEO_F030R8/stm32f030x8.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f030x8.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f030x8.h
* @author MCD Application Team
- * @version V2.1.0
- * @date 03-Oct-2014
+ * @version V2.2.0
+ * @date 05-December-2014
* @brief CMSIS STM32F030x8 devices Peripheral Access Layer Header File.
*
* This file contains:
@@ -371,24 +371,15 @@
typedef struct
{
- __IO uint16_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */
- uint16_t RESERVED0; /*!< Reserved, 0x02 */
- __IO uint16_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
- uint16_t RESERVED1; /*!< Reserved, 0x06 */
- __IO uint16_t SR; /*!< SPI Status register, Address offset: 0x08 */
- uint16_t RESERVED2; /*!< Reserved, 0x0A */
- __IO uint16_t DR; /*!< SPI data register, Address offset: 0x0C */
- uint16_t RESERVED3; /*!< Reserved, 0x0E */
- __IO uint16_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
- uint16_t RESERVED4; /*!< Reserved, 0x12 */
- __IO uint16_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */
- uint16_t RESERVED5; /*!< Reserved, 0x16 */
- __IO uint16_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */
- uint16_t RESERVED6; /*!< Reserved, 0x1A */
- __IO uint16_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
- uint16_t RESERVED7; /*!< Reserved, 0x1E */
- __IO uint16_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
- uint16_t RESERVED8; /*!< Reserved, 0x22 */
+ __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
}SPI_TypeDef;
/**
@@ -2951,13 +2942,15 @@
((INSTANCE) == DMA1_Channel5))
/****************************** GPIO Instances ********************************/
-#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
- ((INSTANCE) == GPIOB) || \
- ((INSTANCE) == GPIOC) || \
- ((INSTANCE) == GPIOD) || \
- ((INSTANCE) == GPIOF))
-
-/****************************** GPIO Lock Instances ****************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOF))
+
+#define IS_GPIO_AF_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB))
+
#define IS_GPIO_LOCK_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
((INSTANCE) == GPIOB))
--- a/TARGET_NUCLEO_F030R8/stm32f0xx.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx.h
* @author MCD Application Team
- * @version V2.1.0
- * @date 03-Oct-2014
+ * @version V2.2.0
+ * @date 05-December-2014
* @brief CMSIS STM32F0xx Device Peripheral Access Layer Header File.
*
* The file is the unique include file that the application programmer
@@ -70,10 +70,10 @@
#if !defined (STM32F030x6) && !defined (STM32F030x8) && \
!defined (STM32F031x6) && !defined (STM32F038xx) && \
- !defined (STM32F042x6) && !defined (STM32F048xx) && \
+ !defined (STM32F042x6) && !defined (STM32F048xx) && !defined (STM32F070x6) && \
!defined (STM32F051x8) && !defined (STM32F058xx) && \
- !defined (STM32F071xB) && !defined (STM32F072xB) && !defined (STM32F078xx) && \
- !defined (STM32F091xC) && !defined (STM32F098xx)
+ !defined (STM32F071xB) && !defined (STM32F072xB) && !defined (STM32F078xx) && !defined (STM32F070xB) && \
+ !defined (STM32F091xC) && !defined (STM32F098xx) && !defined (STM32F030xC)
/* #define STM32F030x6 */ /*!< STM32F030x4, STM32F030x6 Devices (STM32F030xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
#define STM32F030x8 /*!< STM32F030x8 Devices (STM32F030xx microcontrollers where the Flash memory is 64 Kbytes) */
/* #define STM32F031x6 */ /*!< STM32F031x4, STM32F031x6 Devices (STM32F031xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
@@ -82,9 +82,12 @@
/* #define STM32F048x6 */ /*!< STM32F048xx Devices (STM32F042xx microcontrollers where the Flash memory is 32 Kbytes) */
/* #define STM32F051x8 */ /*!< STM32F051x4, STM32F051x6, STM32F051x8 Devices (STM32F051xx microcontrollers where the Flash memory ranges between 16 and 64 Kbytes) */
/* #define STM32F058xx */ /*!< STM32F058xx Devices (STM32F058xx microcontrollers where the Flash memory is 64 Kbytes) */
+ /* #define STM32F070x6 */ /*!< STM32F070x6 Devices (STM32F070x6 microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
+ /* #define STM32F070xB */ /*!< STM32F070xB Devices (STM32F070xB microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */
/* #define STM32F071xB */ /*!< STM32F071x8, STM32F071xB Devices (STM32F071xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */
/* #define STM32F072xB */ /*!< STM32F072x8, STM32F072xB Devices (STM32F072xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */
/* #define STM32F078xx */ /*!< STM32F078xx Devices (STM32F078xx microcontrollers where the Flash memory is 128 Kbytes) */
+ /* #define STM32F030xC */ /*!< STM32F030xC Devices (STM32F030xC microcontrollers where the Flash memory is 256 Kbytes) */
/* #define STM32F091xC */ /*!< STM32F091xC Devices (STM32F091xx microcontrollers where the Flash memory is 256 Kbytes) */
/* #define STM32F098xx */ /*!< STM32F098xx Devices (STM32F098xx microcontrollers where the Flash memory is 256 Kbytes) */
#endif
@@ -102,10 +105,10 @@
#endif /* USE_HAL_DRIVER */
/**
- * @brief CMSIS Device version number V2.1.0
+ * @brief CMSIS Device version number V2.2.0
*/
#define __STM32F0xx_CMSIS_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */
-#define __STM32F0xx_CMSIS_DEVICE_VERSION_SUB1 (0x01) /*!< [23:16] sub1 version */
+#define __STM32F0xx_CMSIS_DEVICE_VERSION_SUB1 (0x02) /*!< [23:16] sub1 version */
#define __STM32F0xx_CMSIS_DEVICE_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
#define __STM32F0xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */
#define __STM32F0xx_CMSIS_DEVICE_VERSION ((__CMSIS_DEVICE_VERSION_MAIN << 24)\
@@ -137,6 +140,10 @@
#include "stm32f051x8.h"
#elif defined(STM32F058xx)
#include "stm32f058xx.h"
+#elif defined(STM32F070x6)
+ #include "stm32f070x6.h"
+#elif defined(STM32F070xB)
+ #include "stm32f070xb.h"
#elif defined(STM32F071xB)
#include "stm32f071xb.h"
#elif defined(STM32F072xB)
@@ -146,7 +153,9 @@
#elif defined(STM32F091xC)
#include "stm32f091xc.h"
#elif defined(STM32F098xx)
- #include "stm32f098xx.h"
+ #include "stm32f098xx.h"
+#elif defined(STM32F030xC)
+ #include "stm32f030xc.h"
#else
#error "Please select first the target STM32F0xx device used in your application (in stm32f0xx.h file)"
#endif
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief This file contains all the functions prototypes for the HAL
* module driver.
******************************************************************************
@@ -154,8 +154,9 @@
*/
#endif /* SYSCFG_CFGR1_PA11_PA12_RMP */
-#if defined(STM32F091xC)
+#if defined(STM32F091xC) || defined(STM32F098xx)
/** @defgroup HAL_IRDA_ENV_SEL HAL IRDA Enveloppe Selection
+ * @note Applicable on STM32F09x
* @{
*/
#define HAL_SYSCFG_IRDA_ENV_SEL_TIM16 (SYSCFG_CFGR1_IRDA_ENV_SEL_0 & SYSCFG_CFGR1_IRDA_ENV_SEL_1) /* 00: Timer16 is selected as IRDA Modulation enveloppe source */
@@ -168,7 +169,7 @@
/**
* @}
*/
-#endif /* STM32F091xC */
+#endif /* STM32F091xC || STM32F098xx */
/** @defgroup HAL_FastModePlus_I2C HAL FastModePlus I2C
@@ -211,22 +212,22 @@
#endif /* SYSCFG_CFGR1_I2C_FMP_I2C2 */
#if defined(SYSCFG_CFGR1_I2C_FMP_PA9)
-#define HAL_SYSCFG_FASTMODEPLUS_I2C2_PA9 (SYSCFG_CFGR1_I2C_FMP_PA9) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 (SYSCFG_CFGR1_I2C_FMP_PA9) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
0: PA9 pin operates in standard mode
1: FM+ mode is enabled on PA9 pin, and the Speed control is bypassed */
#endif /* SYSCFG_CFGR1_I2C_FMP_PA9 */
#if defined(SYSCFG_CFGR1_I2C_FMP_PA10)
-#define HAL_SYSCFG_FASTMODEPLUS_I2C2_PA10 (SYSCFG_CFGR1_I2C_FMP_PA10) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 (SYSCFG_CFGR1_I2C_FMP_PA10) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
0: PA10 pin operates in standard mode
1: FM+ mode is enabled on PA10 pin, and the Speed control is bypassed */
#endif /* SYSCFG_CFGR1_I2C_FMP_PA10 */
-#if defined(STM32F091xC)|| defined(STM32F098xx)
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F042x6) || defined(STM32F048xx)
#define IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG(CONFIG) (((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C1) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C2) || \
- ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C2_PA9) || \
- ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C2_PA10) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PA9) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PA10) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) || \
@@ -238,20 +239,14 @@
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB9))
-#elif defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx)
+#elif defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || defined(STM32F070x6) || defined(STM32F070xB) || defined(STM32F030x6)
#define IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG(CONFIG) (((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C1) || \
- ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C2_PA9) || \
- ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C2_PA10) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PA9) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PA10) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB9))
-#elif defined(STM32F042x6) || defined(STM32F048xx)
-#define IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG(CONFIG) (((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C1) || \
- ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) || \
- ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
- ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) || \
- ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB9))
#else
#define IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG(CONFIG) (((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
@@ -265,113 +260,115 @@
#if defined(STM32F091xC) || defined (STM32F098xx)
/** @defgroup HAL_ISR_Wrapper HAL ISR Wrapper
+ * @brief ISR Wrapper
+ * @note applicable on STM32F09x
* @{
*/
-#define HAL_SYSCFG_ITLINE0 ((uint32_t) 0x00000000)
-#define HAL_SYSCFG_ITLINE1 ((uint32_t) 0x00000001)
-#define HAL_SYSCFG_ITLINE2 ((uint32_t) 0x00000002)
-#define HAL_SYSCFG_ITLINE3 ((uint32_t) 0x00000003)
-#define HAL_SYSCFG_ITLINE4 ((uint32_t) 0x00000004)
-#define HAL_SYSCFG_ITLINE5 ((uint32_t) 0x00000005)
-#define HAL_SYSCFG_ITLINE6 ((uint32_t) 0x00000006)
-#define HAL_SYSCFG_ITLINE7 ((uint32_t) 0x00000007)
-#define HAL_SYSCFG_ITLINE8 ((uint32_t) 0x00000008)
-#define HAL_SYSCFG_ITLINE9 ((uint32_t) 0x00000009)
-#define HAL_SYSCFG_ITLINE10 ((uint32_t) 0x0000000A)
-#define HAL_SYSCFG_ITLINE11 ((uint32_t) 0x0000000B)
-#define HAL_SYSCFG_ITLINE12 ((uint32_t) 0x0000000C)
-#define HAL_SYSCFG_ITLINE13 ((uint32_t) 0x0000000D)
-#define HAL_SYSCFG_ITLINE14 ((uint32_t) 0x0000000E)
-#define HAL_SYSCFG_ITLINE15 ((uint32_t) 0x0000000F)
-#define HAL_SYSCFG_ITLINE16 ((uint32_t) 0x00000010)
-#define HAL_SYSCFG_ITLINE17 ((uint32_t) 0x00000011)
-#define HAL_SYSCFG_ITLINE18 ((uint32_t) 0x00000012)
-#define HAL_SYSCFG_ITLINE19 ((uint32_t) 0x00000013)
-#define HAL_SYSCFG_ITLINE20 ((uint32_t) 0x00000014)
-#define HAL_SYSCFG_ITLINE21 ((uint32_t) 0x00000015)
-#define HAL_SYSCFG_ITLINE22 ((uint32_t) 0x00000016)
-#define HAL_SYSCFG_ITLINE23 ((uint32_t) 0x00000017)
-#define HAL_SYSCFG_ITLINE24 ((uint32_t) 0x00000018)
-#define HAL_SYSCFG_ITLINE25 ((uint32_t) 0x00000019)
-#define HAL_SYSCFG_ITLINE26 ((uint32_t) 0x0000001A)
-#define HAL_SYSCFG_ITLINE27 ((uint32_t) 0x0000001B)
-#define HAL_SYSCFG_ITLINE28 ((uint32_t) 0x0000001C)
-#define HAL_SYSCFG_ITLINE29 ((uint32_t) 0x0000001D)
-#define HAL_SYSCFG_ITLINE30 ((uint32_t) 0x0000001E)
-#define HAL_SYSCFG_ITLINE31 ((uint32_t) 0x0000001F)
+#define HAL_SYSCFG_ITLINE0 ((uint32_t) 0x00000000) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE1 ((uint32_t) 0x00000001) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE2 ((uint32_t) 0x00000002) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE3 ((uint32_t) 0x00000003) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE4 ((uint32_t) 0x00000004) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE5 ((uint32_t) 0x00000005) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE6 ((uint32_t) 0x00000006) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE7 ((uint32_t) 0x00000007) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE8 ((uint32_t) 0x00000008) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE9 ((uint32_t) 0x00000009) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE10 ((uint32_t) 0x0000000A) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE11 ((uint32_t) 0x0000000B) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE12 ((uint32_t) 0x0000000C) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE13 ((uint32_t) 0x0000000D) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE14 ((uint32_t) 0x0000000E) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE15 ((uint32_t) 0x0000000F) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE16 ((uint32_t) 0x00000010) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE17 ((uint32_t) 0x00000011) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE18 ((uint32_t) 0x00000012) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE19 ((uint32_t) 0x00000013) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE20 ((uint32_t) 0x00000014) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE21 ((uint32_t) 0x00000015) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE22 ((uint32_t) 0x00000016) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE23 ((uint32_t) 0x00000017) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE24 ((uint32_t) 0x00000018) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE25 ((uint32_t) 0x00000019) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE26 ((uint32_t) 0x0000001A) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE27 ((uint32_t) 0x0000001B) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE28 ((uint32_t) 0x0000001C) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE29 ((uint32_t) 0x0000001D) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE30 ((uint32_t) 0x0000001E) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE31 ((uint32_t) 0x0000001F) /*!< Internal define for macro handling */
-#define HAL_ITLINE_EWDG ((uint32_t) ((HAL_SYSCFG_ITLINE0 << 0x18) | SYSCFG_ITLINE0_SR_EWDG)) /* EWDG has expired .... */
+#define HAL_ITLINE_EWDG ((uint32_t) ((HAL_SYSCFG_ITLINE0 << 0x18) | SYSCFG_ITLINE0_SR_EWDG)) /*!< EWDG has expired .... */
#if defined(STM32F091xC)
-#define HAL_ITLINE_PVDOUT ((uint32_t) ((HAL_SYSCFG_ITLINE1 << 0x18) | SYSCFG_ITLINE1_SR_PVDOUT)) /* Power voltage detection Interrupt .... */
+#define HAL_ITLINE_PVDOUT ((uint32_t) ((HAL_SYSCFG_ITLINE1 << 0x18) | SYSCFG_ITLINE1_SR_PVDOUT)) /*!< Power voltage detection Interrupt .... */
#endif
-#define HAL_ITLINE_VDDIO2 ((uint32_t) ((HAL_SYSCFG_ITLINE1 << 0x18) | SYSCFG_ITLINE1_SR_VDDIO2)) /* VDDIO2 Interrupt .... */
-#define HAL_ITLINE_RTC_WAKEUP ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18) | SYSCFG_ITLINE2_SR_RTC_WAKEUP)) /* RTC WAKEUP -> exti[20] Interrupt */
-#define HAL_ITLINE_RTC_TSTAMP ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18) | SYSCFG_ITLINE2_SR_RTC_TSTAMP)) /* RTC Time Stamp -> exti[19] interrupt */
-#define HAL_ITLINE_RTC_ALRA ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18) | SYSCFG_ITLINE2_SR_RTC_ALRA)) /* RTC Alarm -> exti[17] interrupt .... */
-#define HAL_ITLINE_FLASH_ITF ((uint32_t) ((HAL_SYSCFG_ITLINE3 << 0x18) | SYSCFG_ITLINE3_SR_FLASH_ITF)) /* Flash ITF Interrupt */
-#define HAL_ITLINE_CRS ((uint32_t) ((HAL_SYSCFG_ITLINE4 << 0x18) | SYSCFG_ITLINE4_SR_CRS)) /* CRS Interrupt */
-#define HAL_ITLINE_CLK_CTRL ((uint32_t) ((HAL_SYSCFG_ITLINE4 << 0x18) | SYSCFG_ITLINE4_SR_CLK_CTRL)) /* CLK Control Interrupt */
-#define HAL_ITLINE_EXTI0 ((uint32_t) ((HAL_SYSCFG_ITLINE5 << 0x18) | SYSCFG_ITLINE5_SR_EXTI0)) /* External Interrupt 0 */
-#define HAL_ITLINE_EXTI1 ((uint32_t) ((HAL_SYSCFG_ITLINE5 << 0x18) | SYSCFG_ITLINE5_SR_EXTI1)) /* External Interrupt 1 */
-#define HAL_ITLINE_EXTI2 ((uint32_t) ((HAL_SYSCFG_ITLINE6 << 0x18) | SYSCFG_ITLINE6_SR_EXTI2)) /* External Interrupt 2 */
-#define HAL_ITLINE_EXTI3 ((uint32_t) ((HAL_SYSCFG_ITLINE6 << 0x18) | SYSCFG_ITLINE6_SR_EXTI3)) /* External Interrupt 3 */
-#define HAL_ITLINE_EXTI4 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI4)) /* EXTI4 Interrupt */
-#define HAL_ITLINE_EXTI5 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI5)) /* EXTI5 Interrupt */
-#define HAL_ITLINE_EXTI6 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI6)) /* EXTI6 Interrupt */
-#define HAL_ITLINE_EXTI7 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI7)) /* EXTI7 Interrupt */
-#define HAL_ITLINE_EXTI8 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI8)) /* EXTI8 Interrupt */
-#define HAL_ITLINE_EXTI9 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI9)) /* EXTI9 Interrupt */
-#define HAL_ITLINE_EXTI10 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI10)) /* EXTI10 Interrupt */
-#define HAL_ITLINE_EXTI11 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI11)) /* EXTI11 Interrupt */
-#define HAL_ITLINE_EXTI12 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI12)) /* EXTI12 Interrupt */
-#define HAL_ITLINE_EXTI13 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI13)) /* EXTI13 Interrupt */
-#define HAL_ITLINE_EXTI14 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI14)) /* EXTI14 Interrupt */
-#define HAL_ITLINE_EXTI15 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI15)) /* EXTI15 Interrupt */
-#define HAL_ITLINE_TSC_EOA ((uint32_t) ((HAL_SYSCFG_ITLINE8 << 0x18) | SYSCFG_ITLINE8_SR_TSC_EOA)) /* Touch control EOA Interrupt */
-#define HAL_ITLINE_TSC_MCE ((uint32_t) ((HAL_SYSCFG_ITLINE8 << 0x18) | SYSCFG_ITLINE8_SR_TSC_MCE)) /* Touch control MCE Interrupt */
-#define HAL_ITLINE_DMA1_CH1 ((uint32_t) ((HAL_SYSCFG_ITLINE9 << 0x18) | SYSCFG_ITLINE9_SR_DMA1_CH1)) /* DMA1 Channel 1 Interrupt */
-#define HAL_ITLINE_DMA1_CH2 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA1_CH2)) /* DMA1 Channel 2 Interrupt */
-#define HAL_ITLINE_DMA1_CH3 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA1_CH3)) /* DMA1 Channel 3 Interrupt */
-#define HAL_ITLINE_DMA2_CH1 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA2_CH1)) /* DMA2 Channel 1 Interrupt */
-#define HAL_ITLINE_DMA2_CH2 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA2_CH2)) /* DMA2 Channel 2 Interrupt */
-#define HAL_ITLINE_DMA1_CH4 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH4)) /* DMA1 Channel 4 Interrupt */
-#define HAL_ITLINE_DMA1_CH5 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH5)) /* DMA1 Channel 5 Interrupt */
-#define HAL_ITLINE_DMA1_CH6 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH6)) /* DMA1 Channel 6 Interrupt */
-#define HAL_ITLINE_DMA1_CH7 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH7)) /* DMA1 Channel 7 Interrupt */
-#define HAL_ITLINE_DMA2_CH3 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA2_CH3)) /* DMA2 Channel 3 Interrupt */
-#define HAL_ITLINE_DMA2_CH4 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA2_CH4)) /* DMA2 Channel 4 Interrupt */
-#define HAL_ITLINE_DMA2_CH5 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA2_CH5)) /* DMA2 Channel 5 Interrupt */
-#define HAL_ITLINE_ADC ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18) | SYSCFG_ITLINE12_SR_ADC)) /* ADC Interrupt */
-#define HAL_ITLINE_COMP1 ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18) | SYSCFG_ITLINE12_SR_COMP1)) /* COMP1 Interrupt -> exti[21] */
-#define HAL_ITLINE_COMP2 ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18) | SYSCFG_ITLINE12_SR_COMP2)) /* COMP2 Interrupt -> exti[21] */
-#define HAL_ITLINE_TIM1_BRK ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_BRK)) /* TIM1 BRK Interrupt */
-#define HAL_ITLINE_TIM1_UPD ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_UPD)) /* TIM1 UPD Interrupt */
-#define HAL_ITLINE_TIM1_TRG ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_TRG)) /* TIM1 TRG Interrupt */
-#define HAL_ITLINE_TIM1_CCU ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_CCU)) /* TIM1 CCU Interrupt */
-#define HAL_ITLINE_TIM1_CC ((uint32_t) ((HAL_SYSCFG_ITLINE14 << 0x18) | SYSCFG_ITLINE14_SR_TIM1_CC)) /* TIM1 CC Interrupt */
-#define HAL_ITLINE_TIM2 ((uint32_t) ((HAL_SYSCFG_ITLINE15 << 0x18) | SYSCFG_ITLINE15_SR_TIM2_GLB)) /* TIM2 Interrupt */
-#define HAL_ITLINE_TIM3 ((uint32_t) ((HAL_SYSCFG_ITLINE16 << 0x18) | SYSCFG_ITLINE16_SR_TIM3_GLB)) /* TIM3 Interrupt */
-#define HAL_ITLINE_DAC ((uint32_t) ((HAL_SYSCFG_ITLINE17 << 0x18) | SYSCFG_ITLINE17_SR_DAC)) /* DAC Interrupt */
-#define HAL_ITLINE_TIM6 ((uint32_t) ((HAL_SYSCFG_ITLINE17 << 0x18) | SYSCFG_ITLINE17_SR_TIM6_GLB)) /* TIM6 Interrupt */
-#define HAL_ITLINE_TIM7 ((uint32_t) ((HAL_SYSCFG_ITLINE18 << 0x18) | SYSCFG_ITLINE18_SR_TIM7_GLB)) /* TIM7 Interrupt */
-#define HAL_ITLINE_TIM14 ((uint32_t) ((HAL_SYSCFG_ITLINE19 << 0x18) | SYSCFG_ITLINE19_SR_TIM14_GLB)) /* TIM14 Interrupt */
-#define HAL_ITLINE_TIM15 ((uint32_t) ((HAL_SYSCFG_ITLINE20 << 0x18) | SYSCFG_ITLINE20_SR_TIM15_GLB)) /* TIM15 Interrupt */
-#define HAL_ITLINE_TIM16 ((uint32_t) ((HAL_SYSCFG_ITLINE21 << 0x18) | SYSCFG_ITLINE21_SR_TIM16_GLB)) /* TIM16 Interrupt */
-#define HAL_ITLINE_TIM17 ((uint32_t) ((HAL_SYSCFG_ITLINE22 << 0x18) | SYSCFG_ITLINE22_SR_TIM17_GLB)) /* TIM17 Interrupt */
-#define HAL_ITLINE_I2C1 ((uint32_t) ((HAL_SYSCFG_ITLINE23 << 0x18) | SYSCFG_ITLINE23_SR_I2C1_GLB)) /* I2C1 Interrupt -> exti[23] */
-#define HAL_ITLINE_I2C2 ((uint32_t) ((HAL_SYSCFG_ITLINE24 << 0x18) | SYSCFG_ITLINE24_SR_I2C2_GLB)) /* I2C2 Interrupt */
-#define HAL_ITLINE_SPI1 ((uint32_t) ((HAL_SYSCFG_ITLINE25 << 0x18) | SYSCFG_ITLINE25_SR_SPI1)) /* I2C1 Interrupt -> exti[23] */
-#define HAL_ITLINE_SPI2 ((uint32_t) ((HAL_SYSCFG_ITLINE26 << 0x18) | SYSCFG_ITLINE26_SR_SPI2)) /* SPI1 Interrupt */
+#define HAL_ITLINE_VDDIO2 ((uint32_t) ((HAL_SYSCFG_ITLINE1 << 0x18) | SYSCFG_ITLINE1_SR_VDDIO2)) /*!< VDDIO2 Interrupt .... */
+#define HAL_ITLINE_RTC_WAKEUP ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18) | SYSCFG_ITLINE2_SR_RTC_WAKEUP)) /*!< RTC WAKEUP -> exti[20] Interrupt */
+#define HAL_ITLINE_RTC_TSTAMP ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18) | SYSCFG_ITLINE2_SR_RTC_TSTAMP)) /*!< RTC Time Stamp -> exti[19] interrupt */
+#define HAL_ITLINE_RTC_ALRA ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18) | SYSCFG_ITLINE2_SR_RTC_ALRA)) /*!< RTC Alarm -> exti[17] interrupt .... */
+#define HAL_ITLINE_FLASH_ITF ((uint32_t) ((HAL_SYSCFG_ITLINE3 << 0x18) | SYSCFG_ITLINE3_SR_FLASH_ITF)) /*!< Flash ITF Interrupt */
+#define HAL_ITLINE_CRS ((uint32_t) ((HAL_SYSCFG_ITLINE4 << 0x18) | SYSCFG_ITLINE4_SR_CRS)) /*!< CRS Interrupt */
+#define HAL_ITLINE_CLK_CTRL ((uint32_t) ((HAL_SYSCFG_ITLINE4 << 0x18) | SYSCFG_ITLINE4_SR_CLK_CTRL)) /*!< CLK Control Interrupt */
+#define HAL_ITLINE_EXTI0 ((uint32_t) ((HAL_SYSCFG_ITLINE5 << 0x18) | SYSCFG_ITLINE5_SR_EXTI0)) /*!< External Interrupt 0 */
+#define HAL_ITLINE_EXTI1 ((uint32_t) ((HAL_SYSCFG_ITLINE5 << 0x18) | SYSCFG_ITLINE5_SR_EXTI1)) /*!< External Interrupt 1 */
+#define HAL_ITLINE_EXTI2 ((uint32_t) ((HAL_SYSCFG_ITLINE6 << 0x18) | SYSCFG_ITLINE6_SR_EXTI2)) /*!< External Interrupt 2 */
+#define HAL_ITLINE_EXTI3 ((uint32_t) ((HAL_SYSCFG_ITLINE6 << 0x18) | SYSCFG_ITLINE6_SR_EXTI3)) /*!< External Interrupt 3 */
+#define HAL_ITLINE_EXTI4 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI4)) /*!< EXTI4 Interrupt */
+#define HAL_ITLINE_EXTI5 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI5)) /*!< EXTI5 Interrupt */
+#define HAL_ITLINE_EXTI6 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI6)) /*!< EXTI6 Interrupt */
+#define HAL_ITLINE_EXTI7 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI7)) /*!< EXTI7 Interrupt */
+#define HAL_ITLINE_EXTI8 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI8)) /*!< EXTI8 Interrupt */
+#define HAL_ITLINE_EXTI9 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI9)) /*!< EXTI9 Interrupt */
+#define HAL_ITLINE_EXTI10 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI10)) /*!< EXTI10 Interrupt */
+#define HAL_ITLINE_EXTI11 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI11)) /*!< EXTI11 Interrupt */
+#define HAL_ITLINE_EXTI12 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI12)) /*!< EXTI12 Interrupt */
+#define HAL_ITLINE_EXTI13 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI13)) /*!< EXTI13 Interrupt */
+#define HAL_ITLINE_EXTI14 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI14)) /*!< EXTI14 Interrupt */
+#define HAL_ITLINE_EXTI15 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI15)) /*!< EXTI15 Interrupt */
+#define HAL_ITLINE_TSC_EOA ((uint32_t) ((HAL_SYSCFG_ITLINE8 << 0x18) | SYSCFG_ITLINE8_SR_TSC_EOA)) /*!< Touch control EOA Interrupt */
+#define HAL_ITLINE_TSC_MCE ((uint32_t) ((HAL_SYSCFG_ITLINE8 << 0x18) | SYSCFG_ITLINE8_SR_TSC_MCE)) /*!< Touch control MCE Interrupt */
+#define HAL_ITLINE_DMA1_CH1 ((uint32_t) ((HAL_SYSCFG_ITLINE9 << 0x18) | SYSCFG_ITLINE9_SR_DMA1_CH1)) /*!< DMA1 Channel 1 Interrupt */
+#define HAL_ITLINE_DMA1_CH2 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA1_CH2)) /*!< DMA1 Channel 2 Interrupt */
+#define HAL_ITLINE_DMA1_CH3 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA1_CH3)) /*!< DMA1 Channel 3 Interrupt */
+#define HAL_ITLINE_DMA2_CH1 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA2_CH1)) /*!< DMA2 Channel 1 Interrupt */
+#define HAL_ITLINE_DMA2_CH2 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA2_CH2)) /*!< DMA2 Channel 2 Interrupt */
+#define HAL_ITLINE_DMA1_CH4 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH4)) /*!< DMA1 Channel 4 Interrupt */
+#define HAL_ITLINE_DMA1_CH5 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH5)) /*!< DMA1 Channel 5 Interrupt */
+#define HAL_ITLINE_DMA1_CH6 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH6)) /*!< DMA1 Channel 6 Interrupt */
+#define HAL_ITLINE_DMA1_CH7 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH7)) /*!< DMA1 Channel 7 Interrupt */
+#define HAL_ITLINE_DMA2_CH3 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA2_CH3)) /*!< DMA2 Channel 3 Interrupt */
+#define HAL_ITLINE_DMA2_CH4 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA2_CH4)) /*!< DMA2 Channel 4 Interrupt */
+#define HAL_ITLINE_DMA2_CH5 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA2_CH5)) /*!< DMA2 Channel 5 Interrupt */
+#define HAL_ITLINE_ADC ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18) | SYSCFG_ITLINE12_SR_ADC)) /*!< ADC Interrupt */
+#define HAL_ITLINE_COMP1 ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18) | SYSCFG_ITLINE12_SR_COMP1)) /*!< COMP1 Interrupt -> exti[21] */
+#define HAL_ITLINE_COMP2 ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18) | SYSCFG_ITLINE12_SR_COMP2)) /*!< COMP2 Interrupt -> exti[21] */
+#define HAL_ITLINE_TIM1_BRK ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_BRK)) /*!< TIM1 BRK Interrupt */
+#define HAL_ITLINE_TIM1_UPD ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_UPD)) /*!< TIM1 UPD Interrupt */
+#define HAL_ITLINE_TIM1_TRG ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_TRG)) /*!< TIM1 TRG Interrupt */
+#define HAL_ITLINE_TIM1_CCU ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_CCU)) /*!< TIM1 CCU Interrupt */
+#define HAL_ITLINE_TIM1_CC ((uint32_t) ((HAL_SYSCFG_ITLINE14 << 0x18) | SYSCFG_ITLINE14_SR_TIM1_CC)) /*!< TIM1 CC Interrupt */
+#define HAL_ITLINE_TIM2 ((uint32_t) ((HAL_SYSCFG_ITLINE15 << 0x18) | SYSCFG_ITLINE15_SR_TIM2_GLB)) /*!< TIM2 Interrupt */
+#define HAL_ITLINE_TIM3 ((uint32_t) ((HAL_SYSCFG_ITLINE16 << 0x18) | SYSCFG_ITLINE16_SR_TIM3_GLB)) /*!< TIM3 Interrupt */
+#define HAL_ITLINE_DAC ((uint32_t) ((HAL_SYSCFG_ITLINE17 << 0x18) | SYSCFG_ITLINE17_SR_DAC)) /*!< DAC Interrupt */
+#define HAL_ITLINE_TIM6 ((uint32_t) ((HAL_SYSCFG_ITLINE17 << 0x18) | SYSCFG_ITLINE17_SR_TIM6_GLB)) /*!< TIM6 Interrupt */
+#define HAL_ITLINE_TIM7 ((uint32_t) ((HAL_SYSCFG_ITLINE18 << 0x18) | SYSCFG_ITLINE18_SR_TIM7_GLB)) /*!< TIM7 Interrupt */
+#define HAL_ITLINE_TIM14 ((uint32_t) ((HAL_SYSCFG_ITLINE19 << 0x18) | SYSCFG_ITLINE19_SR_TIM14_GLB)) /*!< TIM14 Interrupt */
+#define HAL_ITLINE_TIM15 ((uint32_t) ((HAL_SYSCFG_ITLINE20 << 0x18) | SYSCFG_ITLINE20_SR_TIM15_GLB)) /*!< TIM15 Interrupt */
+#define HAL_ITLINE_TIM16 ((uint32_t) ((HAL_SYSCFG_ITLINE21 << 0x18) | SYSCFG_ITLINE21_SR_TIM16_GLB)) /*!< TIM16 Interrupt */
+#define HAL_ITLINE_TIM17 ((uint32_t) ((HAL_SYSCFG_ITLINE22 << 0x18) | SYSCFG_ITLINE22_SR_TIM17_GLB)) /*!< TIM17 Interrupt */
+#define HAL_ITLINE_I2C1 ((uint32_t) ((HAL_SYSCFG_ITLINE23 << 0x18) | SYSCFG_ITLINE23_SR_I2C1_GLB)) /*!< I2C1 Interrupt -> exti[23] */
+#define HAL_ITLINE_I2C2 ((uint32_t) ((HAL_SYSCFG_ITLINE24 << 0x18) | SYSCFG_ITLINE24_SR_I2C2_GLB)) /*!< I2C2 Interrupt */
+#define HAL_ITLINE_SPI1 ((uint32_t) ((HAL_SYSCFG_ITLINE25 << 0x18) | SYSCFG_ITLINE25_SR_SPI1)) /*!< I2C1 Interrupt -> exti[23] */
+#define HAL_ITLINE_SPI2 ((uint32_t) ((HAL_SYSCFG_ITLINE26 << 0x18) | SYSCFG_ITLINE26_SR_SPI2)) /*!< SPI1 Interrupt */
#define HAL_ITLINE_USART1 ((uint32_t) ((HAL_SYSCFG_ITLINE27 << 0x18) | SYSCFG_ITLINE27_SR_USART1_GLB)) /*!< USART1 GLB Interrupt -> exti[25] */
#define HAL_ITLINE_USART2 ((uint32_t) ((HAL_SYSCFG_ITLINE28 << 0x18) | SYSCFG_ITLINE28_SR_USART2_GLB)) /*!< USART2 GLB Interrupt -> exti[26] */
-#define HAL_ITLINE_USART3 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART3_GLB)) /* USART3 Interrupt .... */
-#define HAL_ITLINE_USART4 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART4_GLB)) /* USART4 Interrupt .... */
-#define HAL_ITLINE_USART5 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART5_GLB)) /* USART5 Interrupt .... */
-#define HAL_ITLINE_USART6 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART6_GLB)) /* USART6 Interrupt .... */
-#define HAL_ITLINE_USART7 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART7_GLB)) /* USART7 Interrupt .... */
-#define HAL_ITLINE_USART8 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART8_GLB)) /* USART8 Interrupt .... */
-#define HAL_ITLINE_CAN ((uint32_t) ((HAL_SYSCFG_ITLINE30 << 0x18) | SYSCFG_ITLINE30_SR_CAN)) /* CAN Interrupt */
-#define HAL_ITLINE_CEC ((uint32_t) ((HAL_SYSCFG_ITLINE30 << 0x18) | SYSCFG_ITLINE30_SR_CEC)) /* CEC Interrupt -> exti[27] */
+#define HAL_ITLINE_USART3 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART3_GLB)) /*!< USART3 Interrupt .... */
+#define HAL_ITLINE_USART4 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART4_GLB)) /*!< USART4 Interrupt .... */
+#define HAL_ITLINE_USART5 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART5_GLB)) /*!< USART5 Interrupt .... */
+#define HAL_ITLINE_USART6 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART6_GLB)) /*!< USART6 Interrupt .... */
+#define HAL_ITLINE_USART7 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART7_GLB)) /*!< USART7 Interrupt .... */
+#define HAL_ITLINE_USART8 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART8_GLB)) /*!< USART8 Interrupt .... */
+#define HAL_ITLINE_CAN ((uint32_t) ((HAL_SYSCFG_ITLINE30 << 0x18) | SYSCFG_ITLINE30_SR_CAN)) /*!< CAN Interrupt */
+#define HAL_ITLINE_CEC ((uint32_t) ((HAL_SYSCFG_ITLINE30 << 0x18) | SYSCFG_ITLINE30_SR_CEC)) /*!< CEC Interrupt -> exti[27] */
/**
* @}
*/
@@ -608,7 +605,8 @@
#if defined(STM32F091xC) || defined (STM32F098xx)
/** @defgroup HAL_ISR_wrapper_check HAL ISR wrapper check
* @brief ISR wrapper check
- * @note Allow to determine interrupt source per line.
+ * @note This feature is applicable on STM32F09x
+ * @note Allow to determine interrupt source per line.
* @{
*/
#define __HAL_GET_PENDING_IT(__SOURCE__) (SYSCFG->IT_LINE_SR[((__SOURCE__) >> 0x18)] & ((__SOURCE__) & 0x00FFFFFF))
@@ -620,6 +618,7 @@
#if defined(STM32F091xC) || defined (STM32F098xx)
/** @defgroup HAL_SYSCFG_IRDA_modulation_envelope_selection HAL SYSCFG IRDA modulation envelope selection
* @brief selection of the modulation envelope signal macro, using bits [7:6] of SYS_CTRL(CFGR1) register
+ * @note This feature is applicable on STM32F09x
* @param __SOURCE__: This parameter can be a value of @ref HAL_IRDA_ENV_SEL
* @{
*/
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_adc.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_adc.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_adc.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file containing functions prototypes of ADC HAL library.
******************************************************************************
* @attention
@@ -66,7 +66,7 @@
* - For all parameters: ADC disabled (this is the only possible ADC state to modify parameter 'ClockPrescaler')
* - For all parameters except 'ClockPrescaler': ADC enabled without conversion on going on regular group.
* If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed
- * without error reporting without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly).
+ * without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly).
*/
typedef struct
{
@@ -726,7 +726,7 @@
/**
* @brief Enable ADC discontinuous conversion mode for regular group
- * @param _REG_DISCONTINUOUS_MODE_: Regulat discontinuous mode.
+ * @param _REG_DISCONTINUOUS_MODE_: Regular discontinuous mode.
* @retval None
*/
#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS(_REG_DISCONTINUOUS_MODE_) ((_REG_DISCONTINUOUS_MODE_) << 16)
@@ -781,14 +781,7 @@
* @retval None
*/
#define __HAL_ADC_CFGR1_DMACONTREQ(_DMACONTREQ_MODE_) ((_DMACONTREQ_MODE_) << 1)
-
-/**
- * @brief Configure the channel number into offset OFRx register
- * @param _CHANNEL_: ADC Channel
- * @retval None
- */
-#define __HAL_ADC_OFR_CHANNEL(_CHANNEL_) ((_CHANNEL_) << 26)
-
+
/**
* @brief Configure the analog watchdog high threshold into register TR.
* @param _Threshold_: Threshold value
@@ -810,7 +803,7 @@
*/
#define __HAL_ADC_ENABLING_CONDITIONS(__HANDLE__) \
(( ( ((__HANDLE__)->Instance->CR) & \
- (ADC_CR_ADCAL | ADC_CR_ADSTP | \
+ (ADC_CR_ADCAL | ADC_CR_ADSTP | \
ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN ) \
) == RESET \
) ? SET : RESET)
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_adc_ex.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_adc_ex.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_adc_ex.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of ADC HAL Extension module. ****************************************************************************** * @attention
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_can.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_can.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_can.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of CAN HAL module.
******************************************************************************
* @attention
@@ -43,7 +43,7 @@
extern "C" {
#endif
-#if defined(STM32F072xB) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F072xB) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
@@ -77,23 +77,6 @@
}HAL_CAN_StateTypeDef;
/**
- * @brief HAL CAN Error Code structure definition
- */
-typedef enum
-{
- HAL_CAN_ERROR_NONE = 0x00, /*!< No error */
- HAL_CAN_ERROR_EWG = 0x01, /*!< EWG error */
- HAL_CAN_ERROR_EPV = 0x02, /*!< EPV error */
- HAL_CAN_ERROR_BOF = 0x04, /*!< BOF error */
- HAL_CAN_ERROR_STF = 0x08, /*!< Stuff error */
- HAL_CAN_ERROR_FOR = 0x10, /*!< Form error */
- HAL_CAN_ERROR_ACK = 0x20, /*!< Acknowledgment error */
- HAL_CAN_ERROR_BR = 0x40, /*!< Bit recessive */
- HAL_CAN_ERROR_BD = 0x80, /*!< LEC dominant */
- HAL_CAN_ERROR_CRC = 0x100 /*!< LEC transfer error */
-}HAL_CAN_ErrorTypeDef;
-
-/**
* @brief CAN init structure definition
*/
typedef struct
@@ -250,7 +233,8 @@
__IO HAL_CAN_StateTypeDef State; /*!< CAN communication state */
- __IO HAL_CAN_ErrorTypeDef ErrorCode; /*!< CAN Error code */
+ __IO uint32_t ErrorCode; /*!< CAN Error code
+ This parameter can be a value of @ref CAN_Error */
}CAN_HandleTypeDef;
/**
@@ -263,6 +247,23 @@
* @{
*/
+/** @defgroup CAN_Error CAN Error
+ * @{
+ */
+#define HAL_CAN_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_CAN_ERROR_EWG ((uint32_t)0x00000001) /*!< EWG error */
+#define HAL_CAN_ERROR_EPV ((uint32_t)0x00000002) /*!< EPV error */
+#define HAL_CAN_ERROR_BOF ((uint32_t)0x00000004) /*!< BOF error */
+#define HAL_CAN_ERROR_STF ((uint32_t)0x00000008) /*!< Stuff error */
+#define HAL_CAN_ERROR_FOR ((uint32_t)0x00000010) /*!< Form error */
+#define HAL_CAN_ERROR_ACK ((uint32_t)0x00000020) /*!< Acknowledgment error */
+#define HAL_CAN_ERROR_BR ((uint32_t)0x00000040) /*!< Bit recessive */
+#define HAL_CAN_ERROR_BD ((uint32_t)0x00000080) /*!< LEC dominant */
+#define HAL_CAN_ERROR_CRC ((uint32_t)0x00000100) /*!< LEC transfer error */
+/**
+ * @}
+ */
+
/** @defgroup CAN_InitStatus CAN InitStatus
* @{
*/
@@ -796,7 +797,7 @@
* @}
*/
-#endif /* STM32F072xB || STM32F042x6 || STM32F048xx || STM32F091xC || STM32F098xx */
+#endif /* STM32F072xB || STM32F042x6 || STM32F048xx || STM32F078xx || STM32F091xC || STM32F098xx */
#ifdef __cplusplus
}
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_cec.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_cec.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_cec.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of CEC HAL module. ****************************************************************************** * @attention @@ -178,8 +178,8 @@ uint16_t RxXferSize; /* CEC Rx Transfer size, 0: header received only */ - uint32_t ErrorCode; /* For errors handling purposes, copy of ISR register - in case error is reported */ + __IO uint32_t ErrorCode; /* For errors handling purposes, copy of ISR register + in case error is reported */ HAL_LockTypeDef Lock; /* Locking object */
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_comp.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_comp.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_comp.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of COMP HAL module.
******************************************************************************
* @attention
@@ -97,18 +97,6 @@
}COMP_InitTypeDef;
/**
- * @brief HAL State structures definition
- */
-typedef enum
-{
- HAL_COMP_STATE_RESET = 0x00, /*!< COMP not yet initialized or disabled */
- HAL_COMP_STATE_READY = 0x01, /*!< COMP initialized and ready for use */
- HAL_COMP_STATE_READY_LOCKED = 0x11, /*!< COMP initialized but the configuration is locked */
- HAL_COMP_STATE_BUSY = 0x02, /*!< COMP is running */
- HAL_COMP_STATE_BUSY_LOCKED = 0x12 /*!< COMP is running and the configuration is locked */
-}HAL_COMP_StateTypeDef;
-
-/**
* @brief COMP Handle Structure definition
*/
typedef struct
@@ -116,7 +104,8 @@
COMP_TypeDef *Instance; /*!< Register base address */
COMP_InitTypeDef Init; /*!< COMP required parameters */
HAL_LockTypeDef Lock; /*!< Locking object */
- __IO HAL_COMP_StateTypeDef State; /*!< COMP communication state */
+ __IO uint32_t State; /*!< COMP communication state
+ This parameter can be a value of @ref COMP_State */
}COMP_HandleTypeDef;
/**
@@ -128,6 +117,18 @@
* @{
*/
+/** @defgroup COMP_State COMP State
+ * @{
+ */
+#define HAL_COMP_STATE_RESET ((uint32_t)0x00000000) /*!< COMP not yet initialized or disabled */
+#define HAL_COMP_STATE_READY ((uint32_t)0x00000001) /*!< COMP initialized and ready for use */
+#define HAL_COMP_STATE_READY_LOCKED ((uint32_t)0x00000011) /*!< COMP initialized but the configuration is locked */
+#define HAL_COMP_STATE_BUSY ((uint32_t)0x00000002) /*!< COMP is running */
+#define HAL_COMP_STATE_BUSY_LOCKED ((uint32_t)0x00000012) /*!< COMP is running and the configuration is locked */
+/**
+ * @}
+ */
+
/** @defgroup COMP_OutputPolarity COMP OutputPolarity
* @{
*/
@@ -447,7 +448,7 @@
* @{
*/
/* Peripheral State and Error functions ***************************************/
-HAL_COMP_StateTypeDef HAL_COMP_GetState(COMP_HandleTypeDef *hcomp);
+uint32_t HAL_COMP_GetState(COMP_HandleTypeDef *hcomp);
/**
* @}
*/
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_conf.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_conf.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_conf_template.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief HAL configuration file. ****************************************************************************** * @attention
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_cortex.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_cortex.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_cortex.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of CORTEX HAL module. ****************************************************************************** * @attention
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_crc.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_crc.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_crc.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of CRC HAL module.
******************************************************************************
* @attention
@@ -92,7 +92,7 @@
e.g., for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65.
No need to specify it if DefaultPolynomialUse is set to DEFAULT_POLYNOMIAL_ENABLE */
- uint32_t CRCLength; /*!< This parameter is a value of @ref CRCEx_Polynomial_Size_Definitions and indicates CRC length.
+ uint32_t CRCLength; /*!< This parameter is a value of @ref CRCEx_Polynomial_Sizes and indicates CRC length.
Value can be either one of
CRC_POLYLENGTH_32B (32-bit CRC)
CRC_POLYLENGTH_16B (16-bit CRC)
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_crc_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_crc_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_crc_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of CRC HAL extension module.
******************************************************************************
* @attention
@@ -87,10 +87,10 @@
* @}
*/
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
/** @defgroup CRCEx_Polynomial_Sizes Polynomial sizes to configure the IP
* @{
*/
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
#define CRC_POLYLENGTH_32B ((uint32_t)0x00000000)
#define CRC_POLYLENGTH_16B ((uint32_t)CRC_CR_POLYSIZE_0)
#define CRC_POLYLENGTH_8B ((uint32_t)CRC_CR_POLYSIZE_1)
@@ -99,6 +99,10 @@
((LENGTH) == CRC_POLYLENGTH_16B) || \
((LENGTH) == CRC_POLYLENGTH_8B) || \
((LENGTH) == CRC_POLYLENGTH_7B))
+#else
+#define CRC_POLYLENGTH_32B ((uint32_t)0x00000000)
+#define IS_CRC_POL_LENGTH(LENGTH) ((LENGTH) == CRC_POLYLENGTH_32B)
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
/**
* @}
*/
@@ -106,14 +110,18 @@
/** @defgroup CRCEx_Polynomial_Size_Definitions CRC polynomial possible sizes actual definitions
* @{
*/
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
#define HAL_CRC_LENGTH_32B 32
#define HAL_CRC_LENGTH_16B 16
#define HAL_CRC_LENGTH_8B 8
#define HAL_CRC_LENGTH_7B 7
+#else
+#define HAL_CRC_LENGTH_32B 32
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
/**
* @}
*/
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+
/**
* @}
*/
@@ -137,7 +145,7 @@
*/
#define __HAL_CRC_OUTPUTREVERSAL_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(CRC_CR_REV_OUT))
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/**
* @brief Set CRC non-default polynomial
* @param __HANDLE__ : CRC handle
@@ -145,7 +153,7 @@
* @retval None.
*/
#define __HAL_CRC_POLYNOMIAL_CONFIG(__HANDLE__, __POLYNOMIAL__) ((__HANDLE__)->Instance->POL = (__POLYNOMIAL__))
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/**
* @}
*/
@@ -165,9 +173,9 @@
HAL_StatusTypeDef HAL_CRCEx_Input_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t InputReverseMode);
HAL_StatusTypeDef HAL_CRCEx_Output_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t OutputReverseMode);
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
HAL_StatusTypeDef HAL_CRCEx_Polynomial_Set(CRC_HandleTypeDef *hcrc, uint32_t Pol, uint32_t PolyLength);
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/**
* @}
*/
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_dac.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_dac.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_dac.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of DAC HAL module. ****************************************************************************** * @attention
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_dac_ex.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_dac_ex.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_dac_ex.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of DAC HAL Extension module. ****************************************************************************** * @attention
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_def.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_def.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_def.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief This file contains HAL common defines, enumeration, macros and
* structures definitions.
******************************************************************************
@@ -70,8 +70,8 @@
} HAL_LockTypeDef;
/* Exported macro ------------------------------------------------------------*/
-#ifndef HAL_NULL
- #define HAL_NULL (void *) 0
+#ifndef NULL
+ #define NULL 0
#endif
#define HAL_MAX_DELAY 0xFFFFFFFF
@@ -85,6 +85,8 @@
(__DMA_HANDLE_).Parent = (__HANDLE__); \
} while(0)
+#define UNUSED(x) ((void)(x))
+
/** @brief Reset the Handle's State field.
* @param __HANDLE__: specifies the Peripheral Handle.
* @note This macro can be used for the following purpose:
@@ -154,6 +156,23 @@
#endif /* __ALIGN_BEGIN */
#endif /* __GNUC__ */
+/**
+ * @brief __NOINLINE definition
+ */
+#if defined ( __CC_ARM ) || defined ( __GNUC__ )
+/* ARM & GNUCompiler
+ ----------------
+*/
+#define __NOINLINE __attribute__ ( (noinline) )
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+ ---------------
+*/
+#define __NOINLINE _Pragma("optimize = no_inline")
+
+#endif
+
#ifdef __cplusplus
}
#endif
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_dma.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_dma.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_dma.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of DMA HAL module.
******************************************************************************
* @attention
@@ -288,34 +288,34 @@
* @{
*/
-#define DMA_FLAG_GL1 ((uint32_t)0x00000001)
-#define DMA_FLAG_TC1 ((uint32_t)0x00000002)
-#define DMA_FLAG_HT1 ((uint32_t)0x00000004)
-#define DMA_FLAG_TE1 ((uint32_t)0x00000008)
-#define DMA_FLAG_GL2 ((uint32_t)0x00000010)
-#define DMA_FLAG_TC2 ((uint32_t)0x00000020)
-#define DMA_FLAG_HT2 ((uint32_t)0x00000040)
-#define DMA_FLAG_TE2 ((uint32_t)0x00000080)
-#define DMA_FLAG_GL3 ((uint32_t)0x00000100)
-#define DMA_FLAG_TC3 ((uint32_t)0x00000200)
-#define DMA_FLAG_HT3 ((uint32_t)0x00000400)
-#define DMA_FLAG_TE3 ((uint32_t)0x00000800)
-#define DMA_FLAG_GL4 ((uint32_t)0x00001000)
-#define DMA_FLAG_TC4 ((uint32_t)0x00002000)
-#define DMA_FLAG_HT4 ((uint32_t)0x00004000)
-#define DMA_FLAG_TE4 ((uint32_t)0x00008000)
-#define DMA_FLAG_GL5 ((uint32_t)0x00010000)
-#define DMA_FLAG_TC5 ((uint32_t)0x00020000)
-#define DMA_FLAG_HT5 ((uint32_t)0x00040000)
-#define DMA_FLAG_TE5 ((uint32_t)0x00080000)
-#define DMA_FLAG_GL6 ((uint32_t)0x00100000)
-#define DMA_FLAG_TC6 ((uint32_t)0x00200000)
-#define DMA_FLAG_HT6 ((uint32_t)0x00400000)
-#define DMA_FLAG_TE6 ((uint32_t)0x00800000)
-#define DMA_FLAG_GL7 ((uint32_t)0x01000000)
-#define DMA_FLAG_TC7 ((uint32_t)0x02000000)
-#define DMA_FLAG_HT7 ((uint32_t)0x04000000)
-#define DMA_FLAG_TE7 ((uint32_t)0x08000000)
+#define DMA_FLAG_GL1 ((uint32_t)0x00000001) /*!< Channel 1 global interrupt flag */
+#define DMA_FLAG_TC1 ((uint32_t)0x00000002) /*!< Channel 1 transfer complete flag */
+#define DMA_FLAG_HT1 ((uint32_t)0x00000004) /*!< Channel 1 half transfer flag */
+#define DMA_FLAG_TE1 ((uint32_t)0x00000008) /*!< Channel 1 transfer error flag */
+#define DMA_FLAG_GL2 ((uint32_t)0x00000010) /*!< Channel 2 global interrupt flag */
+#define DMA_FLAG_TC2 ((uint32_t)0x00000020) /*!< Channel 2 transfer complete flag */
+#define DMA_FLAG_HT2 ((uint32_t)0x00000040) /*!< Channel 2 half transfer flag */
+#define DMA_FLAG_TE2 ((uint32_t)0x00000080) /*!< Channel 2 transfer error flag */
+#define DMA_FLAG_GL3 ((uint32_t)0x00000100) /*!< Channel 3 global interrupt flag */
+#define DMA_FLAG_TC3 ((uint32_t)0x00000200) /*!< Channel 3 transfer complete flag */
+#define DMA_FLAG_HT3 ((uint32_t)0x00000400) /*!< Channel 3 half transfer flag */
+#define DMA_FLAG_TE3 ((uint32_t)0x00000800) /*!< Channel 3 transfer error flag */
+#define DMA_FLAG_GL4 ((uint32_t)0x00001000) /*!< Channel 4 global interrupt flag */
+#define DMA_FLAG_TC4 ((uint32_t)0x00002000) /*!< Channel 4 transfer complete flag */
+#define DMA_FLAG_HT4 ((uint32_t)0x00004000) /*!< Channel 4 half transfer flag */
+#define DMA_FLAG_TE4 ((uint32_t)0x00008000) /*!< Channel 4 transfer error flag */
+#define DMA_FLAG_GL5 ((uint32_t)0x00010000) /*!< Channel 5 global interrupt flag */
+#define DMA_FLAG_TC5 ((uint32_t)0x00020000) /*!< Channel 5 transfer complete flag */
+#define DMA_FLAG_HT5 ((uint32_t)0x00040000) /*!< Channel 5 half transfer flag */
+#define DMA_FLAG_TE5 ((uint32_t)0x00080000) /*!< Channel 5 transfer error flag */
+#define DMA_FLAG_GL6 ((uint32_t)0x00100000) /*!< Channel 6 global interrupt flag */
+#define DMA_FLAG_TC6 ((uint32_t)0x00200000) /*!< Channel 6 transfer complete flag */
+#define DMA_FLAG_HT6 ((uint32_t)0x00400000) /*!< Channel 6 half transfer flag */
+#define DMA_FLAG_TE6 ((uint32_t)0x00800000) /*!< Channel 6 transfer error flag */
+#define DMA_FLAG_GL7 ((uint32_t)0x01000000) /*!< Channel 7 global interrupt flag */
+#define DMA_FLAG_TC7 ((uint32_t)0x02000000) /*!< Channel 7 transfer complete flag */
+#define DMA_FLAG_HT7 ((uint32_t)0x04000000) /*!< Channel 7 half transfer flag */
+#define DMA_FLAG_TE7 ((uint32_t)0x08000000) /*!< Channel 7 transfer error flag */
/**
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_dma_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_dma_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_dma_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of DMA HAL Extension module.
******************************************************************************
* @attention
@@ -56,201 +56,229 @@
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
-#if defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
/** @defgroup DMAEx_Exported_Constants DMAEx Exported Constants
* @{
*/
-#define DMA1_CHANNEL1_RMP 0x00000000
-#define DMA1_CHANNEL2_RMP 0x10000000
-#define DMA1_CHANNEL3_RMP 0x20000000
-#define DMA1_CHANNEL4_RMP 0x30000000
-#define DMA1_CHANNEL5_RMP 0x40000000
-#define DMA1_CHANNEL6_RMP 0x50000000
-#define DMA1_CHANNEL7_RMP 0x60000000
-#define DMA2_CHANNEL1_RMP 0x00000000
-#define DMA2_CHANNEL2_RMP 0x10000000
-#define DMA2_CHANNEL3_RMP 0x20000000
-#define DMA2_CHANNEL4_RMP 0x30000000
-#define DMA2_CHANNEL5_RMP 0x40000000
+#define DMA1_CHANNEL1_RMP 0x00000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL2_RMP 0x10000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL3_RMP 0x20000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL4_RMP 0x30000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL5_RMP 0x40000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#if !defined(STM32F030xC)
+#define DMA1_CHANNEL6_RMP 0x50000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL7_RMP 0x60000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL1_RMP 0x00000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL2_RMP 0x10000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL3_RMP 0x20000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL4_RMP 0x30000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL5_RMP 0x40000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#endif /* !defined(STM32F030xC) */
/****************** DMA1 remap bit field definition********************/
/* DMA1 - Channel 1 */
-#define HAL_DMA1_CH1_DEFAULT (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMA1 */
-#define HAL_DMA1_CH1_ADC (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_ADC) /*!< Remap ADC on DMA1 Channel 1*/
-#define HAL_DMA1_CH1_TIM17_CH1 (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 1 */
-#define HAL_DMA1_CH1_TIM17_UP (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 1 */
-#define HAL_DMA1_CH1_USART1_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 1 */
-#define HAL_DMA1_CH1_USART2_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 1 */
-#define HAL_DMA1_CH1_USART3_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 1 */
-#define HAL_DMA1_CH1_USART4_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 1 */
-#define HAL_DMA1_CH1_USART5_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 1 */
-#define HAL_DMA1_CH1_USART6_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 1 */
-#define HAL_DMA1_CH1_USART7_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 1 */
-#define HAL_DMA1_CH1_USART8_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_DEFAULT (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH1_ADC (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_ADC) /*!< Remap ADC on DMA1 Channel 1*/
+#define HAL_DMA1_CH1_TIM17_CH1 (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 1 */
+#define HAL_DMA1_CH1_TIM17_UP (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART1_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART2_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART3_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART4_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART5_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART6_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 1 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH1_USART7_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART8_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 1 */
+#endif /* !defined(STM32F030xC) */
+
/* DMA1 - Channel 2 */
-#define HAL_DMA1_CH2_DEFAULT (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMA1 */
-#define HAL_DMA1_CH2_ADC (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_ADC) /*!< Remap ADC on DMA1 channel 2 */
-#define HAL_DMA1_CH2_I2C1_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 2 */
-#define HAL_DMA1_CH2_SPI1_RX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_SPI1_RX) /*!< Remap SPI1 Rx on DMA1 channel 2 */
-#define HAL_DMA1_CH2_TIM1_CH1 (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_TIM1_CH1) /*!< Remap TIM1 channel 1 on DMA1 channel 2 */
-#define HAL_DMA1_CH2_TIM17_CH1 (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 2 */
-#define HAL_DMA1_CH2_TIM17_UP (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 2 */
-#define HAL_DMA1_CH2_USART1_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 2 */
-#define HAL_DMA1_CH2_USART2_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 2 */
-#define HAL_DMA1_CH2_USART3_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 2 */
-#define HAL_DMA1_CH2_USART4_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 2 */
-#define HAL_DMA1_CH2_USART5_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 2 */
-#define HAL_DMA1_CH2_USART6_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 2 */
-#define HAL_DMA1_CH2_USART7_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 2 */
-#define HAL_DMA1_CH2_USART8_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_DEFAULT (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH2_ADC (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_ADC) /*!< Remap ADC on DMA1 channel 2 */
+#define HAL_DMA1_CH2_I2C1_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_SPI1_RX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_SPI1_RX) /*!< Remap SPI1 Rx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_TIM1_CH1 (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM1_CH1) /*!< Remap TIM1 channel 1 on DMA1 channel 2 */
+#define HAL_DMA1_CH2_TIM17_CH1 (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 2 */
+#define HAL_DMA1_CH2_TIM17_UP (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART1_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART2_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART3_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART4_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART5_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART6_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 2 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH2_USART7_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART8_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 2 */
+#endif /* !defined(STM32F030xC) */
+
/* DMA1 - Channel 3 */
-#define HAL_DMA1_CH3_DEFAULT (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMA1 */
-#define HAL_DMA1_CH3_TIM6_UP (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA1 channel 3 */
-#define HAL_DMA1_CH3_DAC_CH1 (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_DAC_CH1) /*!< Remap DAC Channel 1on DMA1 channel 3 */
-#define HAL_DMA1_CH3_I2C1_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 3 */
-#define HAL_DMA1_CH3_SPI1_TX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_SPI1_TX) /*!< Remap SPI1 Tx on DMA1 channel 3 */
-#define HAL_DMA1_CH3_TIM1_CH2 (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_TIM1_CH2) /*!< Remap TIM1 channel 2 on DMA1 channel 3 */
-#define HAL_DMA1_CH3_TIM2_CH2 (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_TIM2_CH2) /*!< Remap TIM2 channel 2 on DMA1 channel 3 */
-#define HAL_DMA1_CH3_TIM16_CH1 (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 3 */
-#define HAL_DMA1_CH3_TIM16_UP (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 3 */
-#define HAL_DMA1_CH3_USART1_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 3 */
-#define HAL_DMA1_CH3_USART2_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 3 */
-#define HAL_DMA1_CH3_USART3_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 3 */
-#define HAL_DMA1_CH3_USART4_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 3 */
-#define HAL_DMA1_CH3_USART5_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 3 */
-#define HAL_DMA1_CH3_USART6_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 3 */
-#define HAL_DMA1_CH3_USART7_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 3 */
-#define HAL_DMA1_CH3_USART8_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_DEFAULT (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH3_TIM6_UP (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA1 channel 3 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH3_DAC_CH1 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_DAC_CH1) /*!< Remap DAC Channel 1on DMA1 channel 3 */
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH3_I2C1_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_SPI1_TX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_SPI1_TX) /*!< Remap SPI1 Tx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_TIM1_CH2 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM1_CH2) /*!< Remap TIM1 channel 2 on DMA1 channel 3 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH3_TIM2_CH2 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM2_CH2) /*!< Remap TIM2 channel 2 on DMA1 channel 3 */
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH3_TIM16_CH1 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 3 */
+#define HAL_DMA1_CH3_TIM16_UP (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART1_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART2_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART3_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART4_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART5_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART6_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 3 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH3_USART7_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART8_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 3 */
+#endif /* !defined(STM32F030xC) */
+
/* DMA1 - Channel 4 */
-#define HAL_DMA1_CH4_DEFAULT (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMA1 */
-#define HAL_DMA1_CH4_TIM7_UP (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA1 channel 4 */
-#define HAL_DMA1_CH4_DAC_CH2 (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_DAC_CH2) /*!< Remap DAC Channel 2 on DMA1 channel 4 */
-#define HAL_DMA1_CH4_I2C2_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_I2C2_TX) /*!< Remap I2C2 Tx on DMA1 channel 4 */
-#define HAL_DMA1_CH4_SPI2_RX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 4 */
-#define HAL_DMA1_CH4_TIM2_CH4 (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_TIM2_CH4) /*!< Remap TIM2 channel 4 on DMA1 channel 4 */
-#define HAL_DMA1_CH4_TIM3_CH1 (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_TIM3_CH1) /*!< Remap TIM3 channel 1 on DMA1 channel 4 */
-#define HAL_DMA1_CH4_TIM3_TRIG (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 4 */
-#define HAL_DMA1_CH4_TIM16_CH1 (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 4 */
-#define HAL_DMA1_CH4_TIM16_UP (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 4 */
-#define HAL_DMA1_CH4_USART1_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 4 */
-#define HAL_DMA1_CH4_USART2_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 4 */
-#define HAL_DMA1_CH4_USART3_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 4 */
-#define HAL_DMA1_CH4_USART4_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 4 */
-#define HAL_DMA1_CH4_USART5_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 4 */
-#define HAL_DMA1_CH4_USART6_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 4 */
-#define HAL_DMA1_CH4_USART7_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 4 */
-#define HAL_DMA1_CH4_USART8_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_DEFAULT (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH4_TIM7_UP (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA1 channel 4 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH4_DAC_CH2 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_DAC_CH2) /*!< Remap DAC Channel 2 on DMA1 channel 4 */
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH4_I2C2_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_I2C2_TX) /*!< Remap I2C2 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_SPI2_RX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 4 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH4_TIM2_CH4 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM2_CH4) /*!< Remap TIM2 channel 4 on DMA1 channel 4 */
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH4_TIM3_CH1 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM3_CH1) /*!< Remap TIM3 channel 1 on DMA1 channel 4 */
+#define HAL_DMA1_CH4_TIM3_TRIG (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 4 */
+#define HAL_DMA1_CH4_TIM16_CH1 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 4 */
+#define HAL_DMA1_CH4_TIM16_UP (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART1_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART2_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART3_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART4_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART5_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART6_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 4 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH4_USART7_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART8_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 4 */
+#endif /* !defined(STM32F030xC) */
+
/* DMA1 - Channel 5 */
-#define HAL_DMA1_CH5_DEFAULT (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMA1 */
-#define HAL_DMA1_CH5_I2C2_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_I2C2_RX) /*!< Remap I2C2 Rx on DMA1 channel 5 */
-#define HAL_DMA1_CH5_SPI2_TX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_SPI2_TX) /*!< Remap SPI1 Tx on DMA1 channel 5 */
-#define HAL_DMA1_CH5_TIM1_CH3 (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_TIM1_CH3) /*!< Remap TIM1 channel 3 on DMA1 channel 5 */
-#define HAL_DMA1_CH5_USART1_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 5 */
-#define HAL_DMA1_CH5_USART2_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 5 */
-#define HAL_DMA1_CH5_USART3_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 5 */
-#define HAL_DMA1_CH5_USART4_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 5 */
-#define HAL_DMA1_CH5_USART5_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 5 */
-#define HAL_DMA1_CH5_USART6_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 5 */
-#define HAL_DMA1_CH5_USART7_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 5 */
-#define HAL_DMA1_CH5_USART8_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_DEFAULT (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH5_I2C2_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_I2C2_RX) /*!< Remap I2C2 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_SPI2_TX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_SPI2_TX) /*!< Remap SPI1 Tx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_TIM1_CH3 (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_TIM1_CH3) /*!< Remap TIM1 channel 3 on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART1_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART2_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART3_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART4_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART5_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART6_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 5 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH5_USART7_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART8_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 5 */
+#endif /* !defined(STM32F030xC) */
+
+#if !defined(STM32F030xC)
/* DMA1 - Channel 6 */
-#define HAL_DMA1_CH6_DEFAULT (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMA1 */
-#define HAL_DMA1_CH6_I2C1_TX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 6 */
-#define HAL_DMA1_CH6_SPI2_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 6 */
-#define HAL_DMA1_CH6_TIM1_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM1_CH1) /*!< Remap TIM1 channel 1 on DMA1 channel 6 */
-#define HAL_DMA1_CH6_TIM1_CH2 (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM1_CH2) /*!< Remap TIM1 channel 2 on DMA1 channel 6 */
-#define HAL_DMA1_CH6_TIM1_CH3 (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM1_CH3) /*!< Remap TIM1 channel 3 on DMA1 channel 6 */
-#define HAL_DMA1_CH6_TIM3_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM3_CH1) /*!< Remap TIM3 channel 1 on DMA1 channel 6 */
-#define HAL_DMA1_CH6_TIM3_TRIG (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 6 */
-#define HAL_DMA1_CH6_TIM16_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 6 */
-#define HAL_DMA1_CH6_TIM16_UP (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 6 */
-#define HAL_DMA1_CH6_USART1_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 6 */
-#define HAL_DMA1_CH6_USART2_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 6 */
-#define HAL_DMA1_CH6_USART3_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 6 */
-#define HAL_DMA1_CH6_USART4_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 6 */
-#define HAL_DMA1_CH6_USART5_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 6 */
-#define HAL_DMA1_CH6_USART6_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 6 */
-#define HAL_DMA1_CH6_USART7_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 6 */
-#define HAL_DMA1_CH6_USART8_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_DEFAULT (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH6_I2C1_TX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_SPI2_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM1_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH1) /*!< Remap TIM1 channel 1 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM1_CH2 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH2) /*!< Remap TIM1 channel 2 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM1_CH3 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH3) /*!< Remap TIM1 channel 3 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM3_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM3_CH1) /*!< Remap TIM3 channel 1 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM3_TRIG (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM16_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM16_UP (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART1_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART2_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART3_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART4_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART5_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART6_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART7_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART8_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 6 */
/* DMA1 - Channel 7 */
-#define HAL_DMA1_CH7_DEFAULT (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMA1 */
-#define HAL_DMA1_CH7_I2C1_RX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 7 */
-#define HAL_DMA1_CH7_SPI2_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_SPI2_TX) /*!< Remap SPI2 Tx on DMA1 channel 7 */
-#define HAL_DMA1_CH7_TIM2_CH2 (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_TIM2_CH2) /*!< Remap TIM2 channel 2 on DMA1 channel 7 */
-#define HAL_DMA1_CH7_TIM2_CH4 (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_TIM2_CH4) /*!< Remap TIM2 channel 4 on DMA1 channel 7 */
-#define HAL_DMA1_CH7_TIM17_CH1 (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 7 */
-#define HAL_DMA1_CH7_TIM17_UP (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 7 */
-#define HAL_DMA1_CH7_USART1_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 7 */
-#define HAL_DMA1_CH7_USART2_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 7 */
-#define HAL_DMA1_CH7_USART3_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 7 */
-#define HAL_DMA1_CH7_USART4_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 7 */
-#define HAL_DMA1_CH7_USART5_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 7 */
-#define HAL_DMA1_CH7_USART6_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 7 */
-#define HAL_DMA1_CH7_USART7_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 7 */
-#define HAL_DMA1_CH7_USART8_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_DEFAULT (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH7_I2C1_RX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_SPI2_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_SPI2_TX) /*!< Remap SPI2 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_TIM2_CH2 (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM2_CH2) /*!< Remap TIM2 channel 2 on DMA1 channel 7 */
+#define HAL_DMA1_CH7_TIM2_CH4 (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM2_CH4) /*!< Remap TIM2 channel 4 on DMA1 channel 7 */
+#define HAL_DMA1_CH7_TIM17_CH1 (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 7 */
+#define HAL_DMA1_CH7_TIM17_UP (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART1_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART2_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART3_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART4_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART5_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART6_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART7_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART8_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 7 */
/****************** DMA2 remap bit field definition********************/
/* DMA2 - Channel 1 */
-#define HAL_DMA2_CH1_DEFAULT (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_DEFAULT) /*!< Default remap position for DMA2 */
-#define HAL_DMA2_CH1_I2C2_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_CH1_I2C2_TX) /*!< Remap I2C2 TX on DMA2 channel 1 */
-#define HAL_DMA2_CH1_USART1_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 1 */
-#define HAL_DMA2_CH1_USART2_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 1 */
-#define HAL_DMA2_CH1_USART3_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 1 */
-#define HAL_DMA2_CH1_USART4_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 1 */
-#define HAL_DMA2_CH1_USART5_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 1 */
-#define HAL_DMA2_CH1_USART6_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 1 */
-#define HAL_DMA2_CH1_USART7_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 1 */
-#define HAL_DMA2_CH1_USART8_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_DEFAULT (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH1_I2C2_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_I2C2_TX) /*!< Remap I2C2 TX on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART1_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART2_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART3_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART4_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART5_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART6_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART7_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART8_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 1 */
/* DMA2 - Channel 2 */
-#define HAL_DMA2_CH2_DEFAULT (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_DEFAULT) /*!< Default remap position for DMA2 */
-#define HAL_DMA2_CH2_I2C2_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_CH2_I2C2_RX) /*!< Remap I2C2 Rx on DMA2 channel 2 */
-#define HAL_DMA2_CH2_USART1_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 2 */
-#define HAL_DMA2_CH2_USART2_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 2 */
-#define HAL_DMA2_CH2_USART3_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 2 */
-#define HAL_DMA2_CH2_USART4_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 2 */
-#define HAL_DMA2_CH2_USART5_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 2 */
-#define HAL_DMA2_CH2_USART6_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 2 */
-#define HAL_DMA2_CH2_USART7_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 2 */
-#define HAL_DMA2_CH2_USART8_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_DEFAULT (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH2_I2C2_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_I2C2_RX) /*!< Remap I2C2 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART1_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART2_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART3_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART4_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART5_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART6_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART7_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART8_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 2 */
/* DMA2 - Channel 3 */
-#define HAL_DMA2_CH3_DEFAULT (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_DEFAULT) /*!< Default remap position for DMA2 */
-#define HAL_DMA2_CH3_TIM6_UP (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA2 channel 3 */
-#define HAL_DMA2_CH3_DAC_CH1 (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_DAC_CH1) /*!< Remap DAC channel 1 on DMA2 channel 3 */
-#define HAL_DMA2_CH3_SPI1_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_SPI1_RX) /*!< Remap SPI1 Rx on DMA2 channel 3 */
-#define HAL_DMA2_CH3_USART1_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 3 */
-#define HAL_DMA2_CH3_USART2_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 3 */
-#define HAL_DMA2_CH3_USART3_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 3 */
-#define HAL_DMA2_CH3_USART4_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 3 */
-#define HAL_DMA2_CH3_USART5_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 3 */
-#define HAL_DMA2_CH3_USART6_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 3 */
-#define HAL_DMA2_CH3_USART7_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 3 */
-#define HAL_DMA2_CH3_USART8_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_DEFAULT (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH3_TIM6_UP (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA2 channel 3 */
+#define HAL_DMA2_CH3_DAC_CH1 (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_DAC_CH1) /*!< Remap DAC channel 1 on DMA2 channel 3 */
+#define HAL_DMA2_CH3_SPI1_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_SPI1_RX) /*!< Remap SPI1 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART1_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART2_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART3_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART4_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART5_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART6_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART7_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART8_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 3 */
/* DMA2 - Channel 4 */
-#define HAL_DMA2_CH4_DEFAULT (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_DEFAULT) /*!< Default remap position for DMA2 */
-#define HAL_DMA2_CH4_TIM7_UP (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA2 channel 4 */
-#define HAL_DMA2_CH4_DAC_CH2 (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_DAC_CH2) /*!< Remap DAC channel 2 on DMA2 channel 4 */
-#define HAL_DMA2_CH4_SPI1_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_SPI1_TX) /*!< Remap SPI1 Tx on DMA2 channel 4 */
-#define HAL_DMA2_CH4_USART1_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 4 */
-#define HAL_DMA2_CH4_USART2_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 4 */
-#define HAL_DMA2_CH4_USART3_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 4 */
-#define HAL_DMA2_CH4_USART4_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 4 */
-#define HAL_DMA2_CH4_USART5_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 4 */
-#define HAL_DMA2_CH4_USART6_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 4 */
-#define HAL_DMA2_CH4_USART7_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 4 */
-#define HAL_DMA2_CH4_USART8_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_DEFAULT (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH4_TIM7_UP (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA2 channel 4 */
+#define HAL_DMA2_CH4_DAC_CH2 (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_DAC_CH2) /*!< Remap DAC channel 2 on DMA2 channel 4 */
+#define HAL_DMA2_CH4_SPI1_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_SPI1_TX) /*!< Remap SPI1 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART1_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART2_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART3_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART4_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART5_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART6_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART7_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART8_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 4 */
/* DMA2 - Channel 5 */
-#define HAL_DMA2_CH5_DEFAULT (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_DEFAULT) /*!< Default remap position for DMA2 */
-#define HAL_DMA2_CH5_ADC (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_CH5_ADC) /*!< Remap ADC on DMA2 channel 5 */
-#define HAL_DMA2_CH5_USART1_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 5 */
-#define HAL_DMA2_CH5_USART2_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 5 */
-#define HAL_DMA2_CH5_USART3_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 5 */
-#define HAL_DMA2_CH5_USART4_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 5 */
-#define HAL_DMA2_CH5_USART5_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 5 */
-#define HAL_DMA2_CH5_USART6_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 5 */
-#define HAL_DMA2_CH5_USART7_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 5 */
-#define HAL_DMA2_CH5_USART8_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_DEFAULT (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH5_ADC (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_ADC) /*!< Remap ADC on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART1_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART2_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART3_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART4_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART5_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART6_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART7_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART8_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 5 */
+#endif /* !defined(STM32F030xC) */
-#define IS_HAL_DMA1_REMAP(REQUEST) (((REQUEST) == HAL_DMA1_CH1_DEFAULT) ||\
+#if defined(STM32F091xC) || defined(STM32F098xx)
+#define IS_HAL_DMA1_REMAP(REQUEST) (((REQUEST) == HAL_DMA1_CH1_DEFAULT) ||\
((REQUEST) == HAL_DMA1_CH1_ADC) ||\
((REQUEST) == HAL_DMA1_CH1_TIM17_CH1) ||\
((REQUEST) == HAL_DMA1_CH1_TIM17_UP) ||\
@@ -413,10 +441,76 @@
((REQUEST) == HAL_DMA2_CH5_USART6_TX) ||\
((REQUEST) == HAL_DMA2_CH5_USART7_TX) ||\
((REQUEST) == HAL_DMA2_CH5_USART8_TX ))
+#endif /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F030xC)
+#define IS_HAL_DMA1_REMAP(REQUEST) (((REQUEST) == HAL_DMA1_CH1_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH1_ADC) ||\
+ ((REQUEST) == HAL_DMA1_CH1_TIM17_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH1_TIM17_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH2_ADC) ||\
+ ((REQUEST) == HAL_DMA1_CH2_I2C1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_SPI1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_TIM1_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH2_I2C1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_TIM17_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH2_TIM17_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM6_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH3_I2C1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_SPI1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM1_CH2) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM16_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM16_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM7_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH4_I2C2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_SPI2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM3_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM3_TRIG) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM16_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM16_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH5_I2C2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_SPI2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_TIM1_CH3) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART6_RX))
+#endif /* STM32F030xC */
+
/**
* @}
*/
-#endif /* STM32F091xC || STM32F098xx */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
/* Exported macros -----------------------------------------------------------*/
@@ -473,9 +567,9 @@
* @param __HANDLE__: DMA handle
* @param __FLAG__: Get the specified flag.
* This parameter can be any combination of the following values:
- * @arg DMA_FLAG_TCIFx: Transfer complete flag
- * @arg DMA_FLAG_HTIFx: Half transfer complete flag
- * @arg DMA_FLAG_TEIFx: Transfer error flag
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
* Where x can be 1_7 to select the DMA Channel flag.
* @retval The state of FLAG (SET or RESET).
*/
@@ -487,9 +581,9 @@
* @param __HANDLE__: DMA handle
* @param __FLAG__: specifies the flag to clear.
* This parameter can be any combination of the following values:
- * @arg DMA_FLAG_TCIFx: Transfer complete flag
- * @arg DMA_FLAG_HTIFx: Half transfer complete flag
- * @arg DMA_FLAG_TEIFx: Transfer error flag
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
* Where x can be 1_7 to select the DMA Channel flag.
* @retval None
*/
@@ -558,9 +652,9 @@
* @param __HANDLE__: DMA handle
* @param __FLAG__: Get the specified flag.
* This parameter can be any combination of the following values:
- * @arg DMA_FLAG_TCIFx: Transfer complete flag
- * @arg DMA_FLAG_HTIFx: Half transfer complete flag
- * @arg DMA_FLAG_TEIFx: Transfer error flag
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
* Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag.
* @retval The state of FLAG (SET or RESET).
*/
@@ -574,9 +668,9 @@
* @param __HANDLE__: DMA handle
* @param __FLAG__: specifies the flag to clear.
* This parameter can be any combination of the following values:
- * @arg DMA_FLAG_TCIFx: Transfer complete flag
- * @arg DMA_FLAG_HTIFx: Half transfer complete flag
- * @arg DMA_FLAG_TEIFx: Transfer error flag
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
* Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag.
* @retval None
*/
@@ -584,7 +678,7 @@
(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->IFCR = (__FLAG__)) :\
(DMA1->IFCR = (__FLAG__)))
-#else /* STM32F030x8_STM32F031x6_STM32F038xx_STM32F051x8_STM32F058xx Product devices */
+#else /* STM32F030x8_STM32F030xC_STM32F031x6_STM32F038xx_STM32F051x8_STM32F058xx_STM32F070x6_STM32F070xB Product devices */
/**
* @brief Returns the current DMA Channel transfer complete flag.
* @param __HANDLE__: DMA handle
@@ -626,9 +720,9 @@
* @param __HANDLE__: DMA handle
* @param __FLAG__: Get the specified flag.
* This parameter can be any combination of the following values:
- * @arg DMA_FLAG_TCIFx: Transfer complete flag
- * @arg DMA_FLAG_HTIFx: Half transfer complete flag
- * @arg DMA_FLAG_TEIFx: Transfer error flag
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
* Where x can be 1_5 to select the DMA Channel flag.
* @retval The state of FLAG (SET or RESET).
*/
@@ -640,9 +734,9 @@
* @param __HANDLE__: DMA handle
* @param __FLAG__: specifies the flag to clear.
* This parameter can be any combination of the following values:
- * @arg DMA_FLAG_TCIFx: Transfer complete flag
- * @arg DMA_FLAG_HTIFx: Half transfer complete flag
- * @arg DMA_FLAG_TEIFx: Transfer error flag
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
* Where x can be 1_5 to select the DMA Channel flag.
* @retval None
*/
@@ -651,20 +745,22 @@
#endif
-#if defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __HAL_DMA1_REMAP(__REQUEST__) \
do { assert_param(IS_HAL_DMA1_REMAP(__REQUEST__)); \
- DMA1->RMPCR &= ~((uint32_t)0x0F << (uint32_t)(((__REQUEST__) >> 28) * 4)); \
- DMA1->RMPCR |= (uint32_t)((__REQUEST__) & 0x0FFFFFFF); \
+ DMA1->CSELR &= ~((uint32_t)0x0F << (uint32_t)(((__REQUEST__) >> 28) * 4)); \
+ DMA1->CSELR |= (uint32_t)((__REQUEST__) & 0x0FFFFFFF); \
}while(0)
+#if defined(STM32F091xC) || defined(STM32F098xx)
#define __HAL_DMA2_REMAP(__REQUEST__) \
do { assert_param(IS_HAL_DMA2_REMAP(__REQUEST__)); \
- DMA2->RMPCR &= ~((uint32_t)0x0F << (uint32_t)(((__REQUEST__) >> 28) * 4)); \
- DMA2->RMPCR |= (uint32_t)((__REQUEST__) & 0x0FFFFFFF); \
+ DMA2->CSELR &= ~((uint32_t)0x0F << (uint32_t)(((__REQUEST__) >> 28) * 4)); \
+ DMA2->CSELR |= (uint32_t)((__REQUEST__) & 0x0FFFFFFF); \
}while(0)
+#endif /* STM32F091xC || STM32F098xx */
- #endif /* STM32F091xC || STM32F098xx */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
/**
* @}
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_flash.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_flash.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_flash.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of Flash HAL module.
******************************************************************************
* @attention
@@ -60,15 +60,6 @@
* @{
*/
-/**
- * @brief FLASH Error source
- */
-typedef enum
-{
- FLASH_ERROR_PG = 0x01,
- FLASH_ERROR_WRP = 0x02
-} FLASH_ErrorTypeDef;
-
/**
* @brief FLASH Erase structure definition
*/
@@ -134,17 +125,18 @@
*/
typedef struct
{
- __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /* Internal variable to indicate which procedure is ongoing or not in IT context */
+ __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*!< Internal variable to indicate which procedure is ongoing or not in IT context */
- __IO uint32_t DataRemaining; /* Internal variable to save the remaining pages to erase or half-word to program in IT context */
+ __IO uint32_t DataRemaining; /*!< Internal variable to save the remaining pages to erase or half-word to program in IT context */
- __IO uint32_t Address; /* Internal variable to save address selected for program or erase */
+ __IO uint32_t Address; /*!< Internal variable to save address selected for program or erase */
- __IO uint64_t Data; /* Internal variable to save data to be programmed */
+ __IO uint64_t Data; /*!< Internal variable to save data to be programmed */
- HAL_LockTypeDef Lock; /* FLASH locking object */
+ HAL_LockTypeDef Lock; /*!< FLASH locking object */
- __IO FLASH_ErrorTypeDef ErrorCode; /* FLASH error code */
+ __IO uint32_t ErrorCode; /*!< FLASH error code
+ This parameter can be a value of @ref FLASH_Error */
} FLASH_ProcessTypeDef;
@@ -158,6 +150,16 @@
* @{
*/
+/** @defgroup FLASH_Error FLASH Error
+ * @{
+ */
+#define FLASH_ERROR_NONE ((uint32_t)0x00000000)
+#define FLASH_ERROR_PG ((uint32_t)0x00000001)
+#define FLASH_ERROR_WRP ((uint32_t)0x00000002)
+/**
+ * @}
+ */
+
/** @defgroup FLASH_Type_Erase FLASH Type Erase
* @{
*/
@@ -204,7 +206,7 @@
#define OPTIONBYTE_USER ((uint32_t)0x04) /*!<USER option byte configuration*/
#define OPTIONBYTE_DATA ((uint32_t)0x08) /*!<DATA option byte configuration*/
-#define IS_OPTIONBYTE(VALUE) (((VALUE) < (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA)))
+#define IS_OPTIONBYTE(VALUE) ((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA))
/**
* @}
*/
@@ -485,7 +487,7 @@
* @{
*/
/* Peripheral State and Error functions ***************************************/
-FLASH_ErrorTypeDef HAL_FLASH_GetError(void);
+uint32_t HAL_FLASH_GetError(void);
/**
* @}
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_flash_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_flash_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_flash_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of FLASH HAL Extension module.
******************************************************************************
* @attention
@@ -62,21 +62,21 @@
/** @defgroup FLASHEx_Address FLASHEx Address
* @{
*/
-#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F038xx)
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F038xx) || defined(STM32F070x6)
#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x08007FFF))
-#endif /* STM32F030x6 || STM32F031x6 || STM32F042x6 || STM32F048xx || STM32F038xx */
+#endif /* STM32F030x6 || STM32F031x6 || STM32F042x6 || STM32F048xx || STM32F038xx || STM32F070x6 */
#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x0800FFFF))
#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x0801FFFF))
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB*/
-#if defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x0803FFFF))
-#endif /* STM32F091xC || STM32F098xx */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC*/
/**
* @}
*/
@@ -85,14 +85,14 @@
* @{
*/
#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || \
- defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx)
+ defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx) || defined(STM32F070x6)
#define FLASH_PAGE_SIZE 0x400
-#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F058xx */
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F058xx || STM32F070x6 */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define FLASH_PAGE_SIZE 0x800
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx || STM32F030xC */
/**
* @}
@@ -101,21 +101,21 @@
/** @defgroup FLASHEx_Nb_Pages FLASHEx Nb Pages
* @{
*/
-#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F038xx)
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F038xx)|| defined(STM32F070x6)
#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08007FFF)
-#endif /* STM32F030x6 || STM32F031x6 || STM32F042x6 || STM32F048xx || STM32F038xx */
+#endif /* STM32F030x6 || STM32F031x6 || STM32F042x6 || STM32F048xx || STM32F038xx || STM32F070x6 */
#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0800FFFF)
#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0801FFFF)
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB */
-#if defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0803FFFF)
-#endif /* STM32F091xC || STM32F098xx */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
/**
* @}
*/
@@ -124,7 +124,7 @@
* @{
*/
#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || \
- defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx)
+ defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx) || defined(STM32F070x6)
#define OB_WRP_PAGES0TO3 ((uint32_t)0x00000001) /* Write protection of page 0 to 3 */
#define OB_WRP_PAGES4TO7 ((uint32_t)0x00000002) /* Write protection of page 4 to 7 */
#define OB_WRP_PAGES8TO11 ((uint32_t)0x00000004) /* Write protection of page 8 to 11 */
@@ -149,17 +149,17 @@
#define OB_WRP_PAGES32TO63MASK ((uint32_t)0x0000FF00)
#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
-#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F038xx)
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F038xx)|| defined(STM32F070x6)
#define OB_WRP_ALLPAGES ((uint32_t)0x000000FF) /*!< Write protection of all pages */
-#endif /* STM32F030x6 || STM32F031x6 || STM32F042x6 || STM32F048xx || STM32F038xx */
+#endif /* STM32F030x6 || STM32F031x6 || STM32F042x6 || STM32F048xx || STM32F038xx || STM32F070x6 */
#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
#define OB_WRP_ALLPAGES ((uint32_t)0x0000FFFF) /*!< Write protection of all pages */
#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
-#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F038xx || STM32F058xx */
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F038xx || STM32F058xx || STM32F070x6 */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define OB_WRP_PAGES0TO1 ((uint32_t)0x00000001) /* Write protection of page 0 to 1 */
#define OB_WRP_PAGES2TO3 ((uint32_t)0x00000002) /* Write protection of page 2 to 3 */
#define OB_WRP_PAGES4TO5 ((uint32_t)0x00000004) /* Write protection of page 4 to 5 */
@@ -191,32 +191,32 @@
#define OB_WRP_PAGES56TO57 ((uint32_t)0x10000000) /* Write protection of page 56 to 57 */
#define OB_WRP_PAGES58TO59 ((uint32_t)0x20000000) /* Write protection of page 58 to 59 */
#define OB_WRP_PAGES60TO61 ((uint32_t)0x40000000) /* Write protection of page 60 to 61 */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
#define OB_WRP_PAGES62TO63 ((uint32_t)0x80000000) /* Write protection of page 62 to 63 */
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx */
-#if defined(STM32F091xC) || defined(STM32F098xx)
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB */
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define OB_WRP_PAGES62TO127 ((uint32_t)0x80000000) /* Write protection of page 62 to 127 */
-#endif /* STM32F091xC || STM32F098xx */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
#define OB_WRP_PAGES0TO15MASK ((uint32_t)0x000000FF)
#define OB_WRP_PAGES16TO31MASK ((uint32_t)0x0000FF00)
#define OB_WRP_PAGES32TO47MASK ((uint32_t)0x00FF0000)
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
#define OB_WRP_PAGES48TO63MASK ((uint32_t)0xFF000000)
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx */
-#if defined(STM32F091xC) || defined(STM32F098xx)
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB */
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define OB_WRP_PAGES48TO127MASK ((uint32_t)0xFF000000)
-#endif /* STM32F091xC || STM32F098xx */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
#define OB_WRP_ALLPAGES ((uint32_t)0xFFFFFFFF) /*!< Write protection of all pages */
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx || STM32F030xC || STM32F070xB */
#define IS_OB_WRP(PAGE) (((PAGE) != 0x0000000))
/**
* @}
*/
-#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)|| defined(STM32F070x6)
/** @defgroup FLASHEx_OB_BOOT_SEL FLASHEx OB BOOT SEL
* @{
*/
@@ -236,7 +236,7 @@
/**
* @}
*/
-#endif /* STM32F042x6 || STM32F048xx || STM32F091xC || STM32F098xx */
+#endif /* STM32F042x6 || STM32F048xx || STM32F091xC || STM32F098xx || STM32F030xC || STM32F070x6 */
/**
* @}
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_gpio.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_gpio.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_gpio.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of GPIO HAL module. ****************************************************************************** * @attention
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_gpio_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_gpio_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_gpio_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of GPIO HAL Extension module.
******************************************************************************
* @attention
@@ -431,6 +431,71 @@
#endif /* STM32F091xC || STM32F098xx */
+#if defined(STM32F030xC)
+/*--------------------------- STM32F030xC ----------------------------------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< AF0: SPI2 Alternate Function mapping */
+#define GPIO_AF0_TIM3 ((uint8_t)0x00) /*!< AF0: TIM3 Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< AF0: TIM15 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_USART4 ((uint8_t)0x00) /*!< AF0: USART4 Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /*!< AF1: TIM15 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_USART3 ((uint8_t)0x01) /*!< AF1: USART3 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_I2C2 ((uint8_t)0x01) /*!< AF1: I2C2 Alternate Function mapping */
+#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< AF1: SPI2 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+#define GPIO_AF2_USART5 ((uint8_t)0x02) /*!< AF2: USART5 Alternate Function mapping */
+#define GPIO_AF2_USART6 ((uint8_t)0x02) /*!< AF2: USART6 Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /*!< AF3: TIM15 Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03) /*!< AF3: I2C1 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< AF4: USART4 Alternate Function mapping */
+#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< AF4: USART3 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /*!< AF4: I2C1 Alternate Function mapping */
+#define GPIO_AF4_USART5 ((uint8_t)0x04) /*!< AF4: USART5 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< AF5: TIM15 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< AF5: SPI2 Alternate Function mapping */
+#define GPIO_AF5_I2C2 ((uint8_t)0x05) /*!< AF5: I2C2 Alternate Function mapping */
+#define GPIO_AF5_MCO ((uint8_t)0x05) /*!< AF5: MCO Alternate Function mapping */
+#define GPIO_AF5_USART6 ((uint8_t)0x05) /*!< AF5: USART6 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06)
+
+#endif /* STM32F030xC */
+
#if defined (STM32F072xB) || defined (STM32F078xx)
/*--------------------------- STM32F072xB/STM32F078xx ---------------------------*/
/* AF 0 */
@@ -510,6 +575,65 @@
#endif /* STM32F072xB || STM32F078xx */
+#if defined (STM32F070xB)
+/*---------------------------------- STM32F070xB ---------------------------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< AF0: SPI2 Alternate Function mapping */
+#define GPIO_AF0_TIM3 ((uint8_t)0x00) /*!< AF0: TIM3 Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< AF0: TIM15 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_USART4 ((uint8_t)0x00) /*!< AF0: USART4 Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /*!< AF1: TIM15 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_USART3 ((uint8_t)0x01) /*!< AF1: USART4 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_I2C2 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< AF1: SPI2 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+#define GPIO_AF2_USB ((uint8_t)0x02) /*!< AF2: USB Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /*!< AF3: TIM15 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< AF4: USART4 Alternate Function mapping */
+#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< AF4: USART3 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< AF5: TIM15 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< AF5: SPI2 Alternate Function mapping */
+#define GPIO_AF5_I2C2 ((uint8_t)0x05) /*!< AF5: I2C2 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06)
+
+#endif /* STM32F070xB */
+
#if defined (STM32F042x6) || defined (STM32F048xx)
/*--------------------------- STM32F042x6/STM32F048xx ---------------------------*/
/* AF 0 */
@@ -569,6 +693,56 @@
#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06)
#endif /* STM32F042x6 || STM32F048xx */
+
+#if defined (STM32F070x6)
+/*--------------------------------------- STM32F070x6 ----------------------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1 Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_USB ((uint8_t)0x02) /*!< AF2: USB Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03) /*!< AF3: I2C1 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /*!< AF4: I2C1 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_MCO ((uint8_t)0x05) /*!< AF5: MCO Alternate Function mapping */
+#define GPIO_AF5_I2C1 ((uint8_t)0x05) /*!< AF5: I2C1 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_USB ((uint8_t)0x05) /*!< AF5: USB Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06)
+
+#endif /* STM32F070x6 */
/**
* @}
*/
@@ -587,24 +761,24 @@
*/
#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
defined (STM32F091xC) || defined (STM32F098xx)
-#define GET_GPIO_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
((__GPIOx__) == (GPIOB))? 1U :\
((__GPIOx__) == (GPIOC))? 2U :\
((__GPIOx__) == (GPIOD))? 3U :\
((__GPIOx__) == (GPIOE))? 4U : 5U)
#endif
-#if defined (STM32F030x6) || defined (STM32F030x8) || \
+#if defined (STM32F030x6) || defined (STM32F030x8) || defined (STM32F070xB) || defined (STM32F030xC) || \
defined (STM32F051x8) || defined (STM32F058xx)
-#define GET_GPIO_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
((__GPIOx__) == (GPIOB))? 1U :\
((__GPIOx__) == (GPIOC))? 2U :\
((__GPIOx__) == (GPIOD))? 3U : 5U)
#endif
#if defined (STM32F031x6) || defined (STM32F038xx) || \
- defined (STM32F042x6) || defined (STM32F048xx)
-#define GET_GPIO_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
+ defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6)
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
((__GPIOx__) == (GPIOB))? 1U :\
((__GPIOx__) == (GPIOC))? 2U : 5U)
#endif
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_i2c.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_i2c.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_i2c.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of I2C HAL module.
******************************************************************************
* @attention
@@ -121,27 +121,6 @@
* @}
*/
-/** @defgroup I2C_Error_Code_structure_definition I2C Error Code structure definition
- * @brief I2C Error Code structure definition
- * @{
- */
-
-typedef enum
-{
- HAL_I2C_ERROR_NONE = 0x00, /*!< No error */
- HAL_I2C_ERROR_BERR = 0x01, /*!< BERR error */
- HAL_I2C_ERROR_ARLO = 0x02, /*!< ARLO error */
- HAL_I2C_ERROR_AF = 0x04, /*!< AF error */
- HAL_I2C_ERROR_OVR = 0x08, /*!< OVR error */
- HAL_I2C_ERROR_DMA = 0x10, /*!< DMA transfer error */
- HAL_I2C_ERROR_TIMEOUT = 0x20, /*!< Timeout error */
- HAL_I2C_ERROR_SIZE = 0x40 /*!< Size Management error */
-}HAL_I2C_ErrorTypeDef;
-
-/**
- * @}
- */
-
/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition
* @brief I2C handle Structure definition
* @{
@@ -167,7 +146,8 @@
__IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */
- __IO HAL_I2C_ErrorTypeDef ErrorCode; /* I2C Error code */
+ __IO uint32_t ErrorCode; /*!< I2C Error code
+ This parameter can be a value of @ref I2C_Error */
}I2C_HandleTypeDef;
/**
@@ -183,6 +163,25 @@
* @{
*/
+/** @defgroup I2C_Error I2C Error
+ * @brief I2C Error
+ * @{
+ */
+
+#define HAL_I2C_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_I2C_ERROR_BERR ((uint32_t)0x00000001) /*!< BERR error */
+#define HAL_I2C_ERROR_ARLO ((uint32_t)0x00000002) /*!< ARLO error */
+#define HAL_I2C_ERROR_AF ((uint32_t)0x00000004) /*!< AF error */
+#define HAL_I2C_ERROR_OVR ((uint32_t)0x00000008) /*!< OVR error */
+#define HAL_I2C_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+#define HAL_I2C_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */
+#define HAL_I2C_ERROR_SIZE ((uint32_t)0x00000040) /*!< Size Management error */
+
+/**
+ * @}
+ */
+
+
/** @defgroup I2C_addressing_mode I2C addressing mode
* @{
*/
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_i2c_ex.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_i2c_ex.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_i2c_ex.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of I2C HAL Extension module. ****************************************************************************** * @attention @@ -100,8 +100,10 @@ /* Peripheral Control functions ************************************************/ HAL_StatusTypeDef HAL_I2CEx_AnalogFilter_Config(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter); HAL_StatusTypeDef HAL_I2CEx_DigitalFilter_Config(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter); +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp (I2C_HandleTypeDef *hi2c); HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp (I2C_HandleTypeDef *hi2c); +#endif /* !(STM32F030x6) && !(STM32F030x8) && !(STM32F070x6) && !(STM32F070xB) && !(STM32F030xC) */ /** * @}
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_i2s.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_i2s.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_i2s.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of I2S HAL module.
******************************************************************************
* @attention
@@ -104,53 +104,41 @@
}HAL_I2S_StateTypeDef;
/**
- * @brief HAL I2S Error Code structure definition
- */
-typedef enum
-{
- HAL_I2S_ERROR_NONE = 0x00, /*!< No error */
- HAL_I2S_ERROR_TIMEOUT = 0x01, /*!< Timeout error */
- HAL_I2S_ERROR_OVR = 0x02, /*!< OVR error */
- HAL_I2S_ERROR_UDR = 0x04, /*!< UDR error */
- HAL_I2S_ERROR_DMA = 0x08, /*!< DMA transfer error */
- HAL_I2S_ERROR_UNKNOW = 0x10 /*!< Unknow Error error */
-}HAL_I2S_ErrorTypeDef;
-
-/**
* @brief I2S handle Structure definition
*/
typedef struct
{
- SPI_TypeDef *Instance; /* I2S registers base address */
+ SPI_TypeDef *Instance; /*!< I2S registers base address */
- I2S_InitTypeDef Init; /* I2S communication parameters */
+ I2S_InitTypeDef Init; /*!< I2S communication parameters */
- uint16_t *pTxBuffPtr; /* Pointer to I2S Tx transfer buffer */
+ uint16_t *pTxBuffPtr; /*!< Pointer to I2S Tx transfer buffer */
- __IO uint16_t TxXferSize; /* I2S Tx transfer size */
+ __IO uint16_t TxXferSize; /*!< I2S Tx transfer size */
- __IO uint16_t TxXferCount; /* I2S Tx transfer Counter */
+ __IO uint16_t TxXferCount; /*!< I2S Tx transfer Counter */
- uint16_t *pRxBuffPtr; /* Pointer to I2S Rx transfer buffer */
+ uint16_t *pRxBuffPtr; /*!< Pointer to I2S Rx transfer buffer */
- __IO uint16_t RxXferSize; /* I2S Rx transfer size */
+ __IO uint16_t RxXferSize; /*!< I2S Rx transfer size */
- __IO uint16_t RxXferCount; /* I2S Rx transfer counter
+ __IO uint16_t RxXferCount; /*!< I2S Rx transfer counter
(This field is initialized at the
same value as transfer size at the
beginning of the transfer and
decremented when a sample is received.
NbSamplesReceived = RxBufferSize-RxBufferCount) */
- DMA_HandleTypeDef *hdmatx; /* I2S Tx DMA handle parameters */
+ DMA_HandleTypeDef *hdmatx; /*!< I2S Tx DMA handle parameters */
- DMA_HandleTypeDef *hdmarx; /* I2S Rx DMA handle parameters */
+ DMA_HandleTypeDef *hdmarx; /*!< I2S Rx DMA handle parameters */
- __IO HAL_LockTypeDef Lock; /* I2S locking object */
+ __IO HAL_LockTypeDef Lock; /*!< I2S locking object */
- __IO HAL_I2S_StateTypeDef State; /* I2S communication state */
+ __IO HAL_I2S_StateTypeDef State; /*!< I2S communication state */
- __IO HAL_I2S_ErrorTypeDef ErrorCode; /* I2S Error code */
+ __IO uint32_t ErrorCode; /*!< I2S Error code
+ This parameter can be a value of @ref I2S_Error */
}I2S_HandleTypeDef;
/**
@@ -161,6 +149,18 @@
/** @defgroup I2S_Exported_Constants I2S Exported Constants
* @{
*/
+/** @defgroup I2S_Error I2S Error
+ * @{
+ */
+#define HAL_I2S_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_I2S_ERROR_TIMEOUT ((uint32_t)0x00000001) /*!< Timeout error */
+#define HAL_I2S_ERROR_OVR ((uint32_t)0x00000002) /*!< OVR error */
+#define HAL_I2S_ERROR_UDR ((uint32_t)0x00000004) /*!< UDR error */
+#define HAL_I2S_ERROR_DMA ((uint32_t)0x00000008) /*!< DMA transfer error */
+#define HAL_I2S_ERROR_UNKNOW ((uint32_t)0x00000010) /*!< Unknow Error error */
+/**
+ * @}
+ */
/** @defgroup I2S_Mode I2S Mode
* @{
@@ -348,13 +348,21 @@
* @param __HANDLE__: specifies the I2S Handle.
* @retval None
*/
-#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) do{__IO uint32_t tmpreg = (__HANDLE__)->Instance->DR;\
- tmpreg = (__HANDLE__)->Instance->SR;}while(0)
+#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) do{ \
+ __IO uint32_t tmpreg; \
+ tmpreg = (__HANDLE__)->Instance->DR; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg); \
+ }while(0)
/** @brief Clears the I2S UDR pending flag.
* @param __HANDLE__: specifies the I2S Handle.
* @retval None
*/
-#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__)((__HANDLE__)->Instance->SR)
+#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__) do{\
+ __IO uint32_t tmpreg;\
+ tmpreg = ((__HANDLE__)->Instance->SR);\
+ UNUSED(tmpreg); \
+ }while(0)
/**
* @}
*/
@@ -412,7 +420,7 @@
*/
/* Peripheral Control and State functions ************************************/
HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s);
-HAL_I2S_ErrorTypeDef HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
+uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
/**
* @}
*/
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_irda.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_irda.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_irda.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief This file contains all the functions prototypes for the IRDA
* firmware library.
******************************************************************************
@@ -44,7 +44,7 @@
extern "C" {
#endif
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
@@ -107,19 +107,6 @@
HAL_IRDA_STATE_ERROR = 0x04 /*!< Error */
}HAL_IRDA_StateTypeDef;
-/**
- * @brief HAL IRDA Error Code structure definition
- */
-typedef enum
-{
- HAL_IRDA_ERROR_NONE = 0x00, /*!< No error */
- HAL_IRDA_ERROR_PE = 0x01, /*!< Parity error */
- HAL_IRDA_ERROR_NE = 0x02, /*!< Noise error */
- HAL_IRDA_ERROR_FE = 0x04, /*!< frame error */
- HAL_IRDA_ERROR_ORE = 0x08, /*!< Overrun error */
- HAL_IRDA_ERROR_DMA = 0x10 /*!< DMA transfer error */
-}HAL_IRDA_ErrorTypeDef;
-
/**
* @brief IRDA clock sources definition
*/
@@ -137,34 +124,35 @@
*/
typedef struct
{
- USART_TypeDef *Instance; /* USART registers base address */
+ USART_TypeDef *Instance; /*!< USART registers base address */
- IRDA_InitTypeDef Init; /* IRDA communication parameters */
+ IRDA_InitTypeDef Init; /*!< IRDA communication parameters */
- uint8_t *pTxBuffPtr; /* Pointer to IRDA Tx transfer Buffer */
+ uint8_t *pTxBuffPtr; /*!< Pointer to IRDA Tx transfer Buffer */
- uint16_t TxXferSize; /* IRDA Tx Transfer size */
+ uint16_t TxXferSize; /*!< IRDA Tx Transfer size */
- uint16_t TxXferCount; /* IRDA Tx Transfer Counter */
+ uint16_t TxXferCount; /*!< IRDA Tx Transfer Counter */
- uint8_t *pRxBuffPtr; /* Pointer to IRDA Rx transfer Buffer */
+ uint8_t *pRxBuffPtr; /*!< Pointer to IRDA Rx transfer Buffer */
- uint16_t RxXferSize; /* IRDA Rx Transfer size */
+ uint16_t RxXferSize; /*!< IRDA Rx Transfer size */
- uint16_t RxXferCount; /* IRDA Rx Transfer Counter */
+ uint16_t RxXferCount; /*!< IRDA Rx Transfer Counter */
- uint16_t Mask; /* USART RX RDR register mask */
+ uint16_t Mask; /*!< USART RX RDR register mask */
- DMA_HandleTypeDef *hdmatx; /* IRDA Tx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmatx; /*!< IRDA Tx DMA Handle parameters */
- DMA_HandleTypeDef *hdmarx; /* IRDA Rx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmarx; /*!< IRDA Rx DMA Handle parameters */
- HAL_LockTypeDef Lock; /* Locking object */
+ HAL_LockTypeDef Lock; /*!< Locking object */
- HAL_IRDA_StateTypeDef State; /* IRDA communication state */
+ HAL_IRDA_StateTypeDef State; /*!< IRDA communication state */
- HAL_IRDA_ErrorTypeDef ErrorCode; /* IRDA Error code */
-
+ __IO uint32_t ErrorCode; /*!< IRDA Error code
+ This parameter can be a value of @ref IRDA_Error */
+
}IRDA_HandleTypeDef;
/**
@@ -189,6 +177,19 @@
* @{
*/
+/** @defgroup IRDA_Error IRDA Error
+ * @{
+ */
+#define HAL_IRDA_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_IRDA_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */
+#define HAL_IRDA_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */
+#define HAL_IRDA_ERROR_FE ((uint32_t)0x00000004) /*!< frame error */
+#define HAL_IRDA_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */
+#define HAL_IRDA_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
/** @defgroup IRDA_Parity IRDA Parity
* @{
*/
@@ -551,7 +552,7 @@
* @}
*/
-/* Include IRDA HAL Extension module */
+/* Include IRDA HAL Extended module */
#include "stm32f0xx_hal_irda_ex.h"
/* Exported functions --------------------------------------------------------*/
@@ -618,7 +619,7 @@
* @}
*/
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#ifdef __cplusplus
}
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_irda_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_irda_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_irda_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of IRDA HAL Extension module.
******************************************************************************
* @attention
@@ -43,7 +43,7 @@
extern "C" {
#endif
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
@@ -103,7 +103,7 @@
* @retval IRDA clocking source, written in __CLOCKSOURCE__.
*/
-#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx)
+#if defined(STM32F031x6) || defined(STM32F038xx)
#define __HAL_IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
switch(__HAL_RCC_GET_USART1_SOURCE()) \
@@ -125,8 +125,7 @@
break; \
} \
} while(0)
-#elif defined (STM32F030x8) || \
- defined (STM32F042x6) || defined (STM32F048xx) || \
+#elif defined (STM32F042x6) || defined (STM32F048xx) || \
defined (STM32F051x8) || defined (STM32F058xx)
#define __HAL_IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
@@ -310,7 +309,7 @@
} \
} while(0)
-#endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */
+#endif /* defined(STM32F031x6) || defined(STM32F038xx) */
/** @brief Computes the mask to apply to retrieve the received data
@@ -404,7 +403,7 @@
* @}
*/
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#ifdef __cplusplus
}
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_iwdg.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_iwdg.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_iwdg.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of IWDG HAL module. ****************************************************************************** * @attention
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_pcd.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_pcd.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_pcd.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of PCD HAL module.
******************************************************************************
* @attention
@@ -43,7 +43,7 @@
extern "C" {
#endif
-#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx)
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)|| defined(STM32F070x6)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
@@ -98,13 +98,13 @@
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
uint32_t speed; /*!< USB Core speed.
- This parameter can be any value of @ref USB_Core_Speed */
+ This parameter can be any value of @ref PCD_Core_Speed */
uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size.
- This parameter can be any value of @ref USB_EP0_MPS */
+ This parameter can be any value of @ref PCD_EP0_MPS */
uint32_t phy_itface; /*!< Select the used PHY interface.
- This parameter can be any value of @ref USB_Core_PHY */
+ This parameter can be any value of @ref PCD_Core_PHY */
uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal.
This parameter can be set to ENABLE or DISABLE */
@@ -132,7 +132,7 @@
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
uint8_t type; /*!< Endpoint type
- This parameter can be any value of @ref USB_EP_Type */
+ This parameter can be any value of @ref PCD_EP_Type */
uint16_t pmaadress; /*!< PMA Address
This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
@@ -190,7 +190,7 @@
* @{
*/
-/** @defgroup USB_Core_Speed USB Core Speed
+/** @defgroup PCD_Core_Speed PCD Core Speed
* @{
*/
#define PCD_SPEED_HIGH 0 /* Not Supported */
@@ -199,7 +199,7 @@
* @}
*/
-/** @defgroup USB_Core_PHY USB Core PHY
+ /** @defgroup PCD_Core_PHY PCD Core PHY
* @{
*/
#define PCD_PHY_EMBEDDED 2
@@ -207,7 +207,7 @@
* @}
*/
-/** @defgroup USB_EP0_MPS USB EP0 MPS
+/** @defgroup PCD_EP0_MPS PCD EP0 MPS
* @{
*/
#define DEP0CTL_MPS_64 0
@@ -223,7 +223,7 @@
* @}
*/
-/** @defgroup USB_EP_Type USB EP Type
+/** @defgroup PCD_EP_Type PCD EP Type
* @{
*/
#define PCD_EP_TYPE_CTRL 0
@@ -234,7 +234,7 @@
* @}
*/
-/** @defgroup USB_ENDP USB ENDP
+/** @defgroup PCD_ENDP_Type PCD_ENDP_Type
* @{
*/
@@ -267,7 +267,7 @@
* @{
*/
#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISTR) & (__INTERRUPT__)) == (__INTERRUPT__))
-#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) = ~(__INTERRUPT__))
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) &= ~(__INTERRUPT__))
#define USB_EXTI_LINE_WAKEUP ((uint32_t)0x00040000) /*!< External interrupt line 18 Connected to the USB FS EXTI Line */
@@ -770,7 +770,7 @@
* @}
*/
-#endif /* STM32F042x6 || STM32F072xB || STM32F078xx */
+#endif /* STM32F042x6 || STM32F072xB || STM32F078xx || STM32F070xB || STM32F070x6 */
#ifdef __cplusplus
}
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_pcd_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_pcd_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_pcd_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of PCD HAL Extension module.
******************************************************************************
* @attention
@@ -43,7 +43,7 @@
extern "C" {
#endif
-#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx)
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx)|| defined(STM32F070xB)|| defined(STM32F070x6)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
@@ -65,8 +65,8 @@
/** @addtogroup PCDEx_Exported_Functions
* @{
*/
-/** @addtogroup PCDEx_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
+
+/** @addtogroup PCDEx_Exported_Functions_Group2
* @{
*/
@@ -90,7 +90,7 @@
* @}
*/
-#endif /* STM32F042x6 || STM32F072xB || STM32F078xx */
+#endif /* STM32F042x6 || STM32F072xB || STM32F078xx || STM32F070xB || STM32F070x6*/
#ifdef __cplusplus
}
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_pwr.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_pwr.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_pwr.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of PWR HAL module. ****************************************************************************** * @attention @@ -175,6 +175,11 @@ void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); void HAL_PWR_EnterSTANDBYMode(void); +void HAL_PWR_EnableSleepOnExit(void); +void HAL_PWR_DisableSleepOnExit(void); +void HAL_PWR_EnableSEVOnPend(void); +void HAL_PWR_DisableSEVOnPend(void); + /** * @} */
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_pwr_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_pwr_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_pwr_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of PWR HAL Extension module.
******************************************************************************
* @attention
@@ -92,8 +92,8 @@
/** @defgroup PWREx_WakeUp_Pins PWREx Wakeup Pins
* @{
*/
-#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx)
+#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define PWR_WAKEUP_PIN1 ((uint32_t)0x00)
#define PWR_WAKEUP_PIN2 ((uint32_t)0x01)
#define PWR_WAKEUP_PIN3 ((uint32_t)0x02)
@@ -117,8 +117,8 @@
#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
((PIN) == PWR_WAKEUP_PIN2))
-#endif /* defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || */
- /* defined (STM32F091xC) || defined (STM32F098xx) */
+#endif /* defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || */
+ /* defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
* @}
*/
@@ -142,9 +142,9 @@
#define PWR_EXTI_LINE_VDDIO2 ((uint32_t)0x80000000) /*!< External interrupt line 31 Connected to the Vddio2 Monitor EXTI Line */
-#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) ||\
defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx) */
+ defined (STM32F091xC) || defined (STM32F098xx) ||*/
/**
* @}
*/
@@ -204,6 +204,10 @@
#define PWR_FLAG_SB PWR_CSR_SBF
#define PWR_FLAG_PVDO PWR_CSR_PVDO
#define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF
+#elif defined (STM32F070x6) || defined (STM32F070xB) || defined (STM32F030xC)
+#define PWR_FLAG_WU PWR_CSR_WUF
+#define PWR_FLAG_SB PWR_CSR_SBF
+#define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF
#else
#define PWR_FLAG_WU PWR_CSR_WUF
#define PWR_FLAG_SB PWR_CSR_SBF
@@ -339,7 +343,7 @@
#define __HAL_PWR_VDDIO2_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_VDDIO2))
-#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) ||\
defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
defined (STM32F091xC) || defined (STM32F098xx) */
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_rcc.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_rcc.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_rcc.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of RCC HAL module.
******************************************************************************
* @attention
@@ -105,7 +105,7 @@
uint32_t HSI14CalibrationValue; /*!< The HSI14 calibration trimming value (default is RCC_HSI14CALIBRATION_DEFAULT).
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
- uint32_t HSI48State; /*!< The new state of the HSI48 (only applicable to STM32F07x and STM32F0x2 devices).
+ uint32_t HSI48State; /*!< The new state of the HSI48 (only applicable to STM32F07x, STM32F0x2 and STM32F09x devices).
This parameter can be a value of @ref RCCEx_HSI48_Config */
uint32_t LSIState; /*!< The new state of the LSI.
@@ -963,32 +963,6 @@
* @}
*/
-/** @addtogroup RCC_USARTx_Clock_Config RCC USARTx Clock Config
- * @{
- */
-/** @brief Macro to configure the USART2 clock (USART2CLK).
- * @param __USART2CLKSource__: specifies the USART2 clock source.
- * This parameter can be one of the following values:
- * @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
- * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
- * @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
- * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
- */
-#define __HAL_RCC_USART2_CONFIG(__USART2CLKSource__) \
- MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART2SW, (uint32_t)(__USART2CLKSource__))
-
-/** @brief Macro to get the USART2 clock source.
- * @retval The clock source can be one of the following values:
- * @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
- * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
- * @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
- * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
- */
-#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART2SW)))
-/**
- * @}
- */
-
/** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration
* @{
*/
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_rcc_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_rcc_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_rcc_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of RCC HAL Extension module.
******************************************************************************
* @attention
@@ -63,7 +63,8 @@
/**
* @brief RCC extended clocks structure definition
*/
-#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx)
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || \
+ defined(STM32F030xC)
typedef struct
{
uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
@@ -79,7 +80,29 @@
This parameter can be a value of @ref RCC_I2C1_Clock_Source */
}RCC_PeriphCLKInitTypeDef;
-#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx */
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx ||
+ STM32F030xC */
+
+#if defined(STM32F070x6) || defined(STM32F070xB)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t UsbClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F070x6 || STM32F070xB */
#if defined(STM32F042x6) || defined(STM32F048xx)
typedef struct
@@ -205,23 +228,9 @@
}RCC_PeriphCLKInitTypeDef;
#endif /* STM32F091xC || STM32F098xx */
-
#if defined(STM32F042x6) || defined(STM32F048xx) || \
defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
defined(STM32F091xC) || defined(STM32F098xx)
-/**
- * @brief RCC CRS Status structures definition
- */
-typedef enum
-{
- RCC_CRS_NONE = 0x00,
- RCC_CRS_TIMEOUT = 0x01,
- RCC_CRS_SYNCOK = 0x02,
- RCC_CRS_SYNCWARM = 0x04,
- RCC_CRS_SYNCERR = 0x08,
- RCC_CRS_SYNCMISS = 0x10,
- RCC_CRS_TRIMOV = 0x20
-} RCC_CRSStatusTypeDef;
/**
* @brief RCC_CRS Init structure definition
@@ -271,7 +280,7 @@
}RCC_CRSSynchroInfoTypeDef;
-#endif /* STM32F042x6 || */
+#endif /* STM32F042x6 || STM32F048xx */
/* STM32F071xB || STM32F072xB || STM32F078xx || */
/* STM32F091xC || STM32F098xx */
@@ -285,17 +294,51 @@
* @{
*/
+/** @defgroup RCCEx_CRS_Status RCCEx CRS Status
+ * @{
+ */
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define RCC_CRS_NONE ((uint32_t)0x00000000)
+#define RCC_CRS_TIMEOUT ((uint32_t)0x00000001)
+#define RCC_CRS_SYNCOK ((uint32_t)0x00000002)
+#define RCC_CRS_SYNCWARM ((uint32_t)0x00000004)
+#define RCC_CRS_SYNCERR ((uint32_t)0x00000008)
+#define RCC_CRS_SYNCMISS ((uint32_t)0x00000010)
+#define RCC_CRS_TRIMOV ((uint32_t)0x00000020)
+
+#endif /* STM32F042x6 || STM32F048xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+/**
+ * @}
+ */
+
/** @defgroup RCCEx_Periph_Clock_Selection RCCEx Periph Clock Selection
* @{
*/
-#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx)
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || \
+ defined(STM32F030xC)
#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \
RCC_PERIPHCLK_RTC))
-#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx */
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx ||
+ STM32F030xC */
+
+#if defined(STM32F070x6) || defined(STM32F070xB)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_USB ((uint32_t)0x00020000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \
+ RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_USB))
+#endif /* STM32F070x6 || STM32F070xB */
#if defined(STM32F042x6) || defined(STM32F048xx)
#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
@@ -365,7 +408,7 @@
* @{
*/
-#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx)
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || defined(STM32F070x6) || defined(STM32F070xB) || defined(STM32F030xC)
#define RCC_MCOSOURCE_PLLCLK_NODIV (RCC_CFGR_MCO_PLL | RCC_CFGR_PLLNODIV)
@@ -379,7 +422,7 @@
((SOURCE) == RCC_MCOSOURCE_PLLCLK_DIV2) || \
((SOURCE) == RCC_MCOSOURCE_HSI14))
-#endif /* STM32F030x6 || STM32F031x6 || STM32F038xx */
+#endif /* STM32F030x6 || STM32F031x6 || STM32F038xx || STM32F070x6 || STM32F070xB || STM32F030xC */
#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
@@ -442,6 +485,20 @@
#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx */
+#if defined(STM32F070x6) || defined(STM32F070xB)
+
+/** @defgroup RCCEx_USB_Clock_Source RCCEx USB Clock Source
+ * @{
+ */
+#define RCC_USBCLKSOURCE_PLLCLK RCC_CFGR3_USBSW_PLLCLK
+
+#define IS_RCC_USBCLKSOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSOURCE_PLLCLK))
+/**
+ * @}
+ */
+
+#endif /* STM32F070x6 || STM32F070xB */
+
#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
defined(STM32F091xC) || defined(STM32F098xx)
@@ -554,12 +611,16 @@
/**
* @}
*/
-
#else
/** @defgroup RCCEx_PLL_Clock_Source RCCEx PLL Clock Source
* @{
*/
+
+#if defined(STM32F070xB) || defined(STM32F070x6) || defined(STM32F030xC)
+#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_PREDIV
+#else
#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_DIV2
+#endif
#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \
((SOURCE) == RCC_PLLSOURCE_HSE))
@@ -608,10 +669,10 @@
#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
-#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || \
- defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F071xB) || \
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || defined(STM32F070x6) || \
+ defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F071xB) || defined(STM32F070xB) || \
defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define RCC_MCO_DIV1 ((uint32_t)0x00000000)
#define RCC_MCO_DIV2 ((uint32_t)0x10000000)
@@ -628,8 +689,8 @@
((DIV) == RCC_MCO_DIV64) || ((DIV) == RCC_MCO_DIV128))
#endif /* STM32F030x6 || STM32F031x6 || STM32F038xx || STM32F042x6 || STM32F048xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070x6 || STM32F070xB */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
/**
* @}
@@ -760,13 +821,13 @@
* @}
*/
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
/**
* @}
*/
-
-#endif /* STM32F042x6 || STM32F048xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
/* Exported macros ------------------------------------------------------------*/
/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros
@@ -780,29 +841,29 @@
* using it.
* @{
*/
-#if defined(STM32F030x6) || defined(STM32F030x8) || \
- defined(STM32F051x8) || defined(STM32F058xx) || \
+#if defined(STM32F030x6) || defined(STM32F030x8) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || defined(STM32F070xB) || \
defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __GPIOD_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIODEN))
#define __GPIOD_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIODEN))
-#endif /* STM32F030x6 || STM32F030x8 || */
- /* STM32F051x8 || STM32F058xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx |[ */
- /* STM32F091xC || STM32F098xx */
+#endif /* STM32F030x6 || STM32F030x8 || */
+ /* STM32F051x8 || STM32F058xx || STM32F070xB || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __GPIOE_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOEEN))
#define __GPIOE_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOEEN))
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
#if defined(STM32F042x6) || defined(STM32F048xx) || \
defined(STM32F051x8) || defined(STM32F058xx) || \
@@ -834,8 +895,8 @@
#if defined(STM32F030x8) || \
defined(STM32F042x6) || defined(STM32F048xx) || \
defined(STM32F051x8) || defined(STM32F058xx) || \
- defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __USART2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART2EN))
#define __SPI2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI2EN))
@@ -845,8 +906,8 @@
#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */
/* STM32F051x8 || STM32F058xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
#if defined(STM32F031x6) || defined(STM32F038xx) || \
defined(STM32F042x6) || defined(STM32F048xx) || \
@@ -866,8 +927,8 @@
#if defined(STM32F030x8) || \
defined(STM32F051x8) || defined(STM32F058xx) || \
- defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __TIM6_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM6EN))
#define __I2C2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C2EN))
@@ -877,8 +938,8 @@
#endif /* STM32F030x8 || */
/* STM32F051x8 || STM32F058xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
#if defined(STM32F051x8) || defined(STM32F058xx) || \
defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
@@ -906,8 +967,8 @@
/* STM32F071xB || STM32F072xB || STM32F078xx || */
/* STM32F091xC || STM32F098xx */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __TIM7_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM7EN))
#define __USART3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART3EN))
@@ -917,18 +978,18 @@
#define __USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
#define __USART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART4EN))
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
-#if defined(STM32F042x6) || defined(STM32F048xx) || \
- defined(STM32F072xB) || defined(STM32F078xx)
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
+ defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
#define __USB_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USBEN))
#define __USB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USBEN))
-#endif /* STM32F042x6 || STM32F048xx || */
- /* STM32F072xB || STM32F078xx */
+#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F072xB || STM32F078xx || STM32F070xB */
#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || \
defined(STM32F091xC) || defined(STM32F098xx)
@@ -951,40 +1012,46 @@
/* STM32F071xB || STM32F072xB || STM32F078xx || */
/* STM32F091xC || STM32F098xx */
-#if defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __USART5_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART5EN))
#define __USART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART5EN))
-#endif /* STM32F091xC || STM32F098xx */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
*/
-#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || \
+#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
defined(STM32F051x8) || defined(STM32F058xx) || \
- defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __TIM15_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM15EN))
#define __TIM15_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM15EN))
-#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */
/* STM32F051x8 || STM32F058xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __USART6_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART6EN))
+
+#define __USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN))
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
#if defined(STM32F091xC) || defined(STM32F098xx)
-#define __USART6_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART6EN))
#define __USART7_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART7EN))
#define __USART8_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART8EN))
-#define __USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN))
#define __USART7_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART7EN))
#define __USART8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART8EN))
@@ -1002,10 +1069,10 @@
/** @brief Force or release AHB peripheral reset.
*/
-#if defined(STM32F030x6) || defined(STM32F030x8) || \
- defined(STM32F051x8) || defined(STM32F058xx) || \
- defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F030x6) || defined(STM32F030x8) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __GPIOD_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIODRST))
@@ -1013,18 +1080,18 @@
#endif /* STM32F030x6 || STM32F030x8 || */
/* STM32F051x8 || STM32F058xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __GPIOE_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOERST))
#define __GPIOE_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOERST))
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
#if defined(STM32F042x6) || defined(STM32F048xx) || \
defined(STM32F051x8) || defined(STM32F058xx) || \
@@ -1043,10 +1110,10 @@
/** @brief Force or release APB1 peripheral reset.
*/
#if defined(STM32F030x8) || \
- defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
defined(STM32F051x8) || defined(STM32F058xx) || \
- defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST))
#define __SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
@@ -1054,10 +1121,10 @@
#define __USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST))
#define __SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
-#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */
/* STM32F051x8 || STM32F058xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
#if defined(STM32F031x6) || defined(STM32F038xx) || \
defined(STM32F042x6) || defined(STM32F048xx) || \
@@ -1077,8 +1144,8 @@
#if defined(STM32F030x8) || \
defined(STM32F051x8) || defined(STM32F058xx) || \
- defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) ||\
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
#define __I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
@@ -1088,8 +1155,8 @@
#endif /* STM32F030x8 || */
/* STM32F051x8 || STM32F058xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
#if defined(STM32F051x8) || defined(STM32F058xx) || \
defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
@@ -1117,8 +1184,8 @@
/* STM32F071xB || STM32F072xB || STM32F078xx || */
/* STM32F091xC || STM32F098xx */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
#define __USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
@@ -1128,18 +1195,18 @@
#define __USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
#define __USART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART4RST))
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
-#if defined(STM32F042x6) || defined(STM32F048xx) || \
- defined(STM32F072xB) || defined(STM32F078xx)
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
+ defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
#define __USB_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USBRST))
#define __USB_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USBRST))
-#endif /* STM32F042x6 || STM32F048xx || */
- /* STM32F072xB || STM32F078xx */
+#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F072xB || STM32F078xx || STM32F070xB */
#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || \
defined(STM32F091xC) || defined(STM32F098xx)
@@ -1163,38 +1230,44 @@
/* STM32F071xB || STM32F072xB || STM32F078xx || */
/* STM32F091xC || STM32F098xx */
-#if defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __USART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART5RST))
#define __USART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART5RST))
-#endif /* STM32F091xC || STM32F098xx */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
/** @brief Force or release APB2 peripheral reset.
*/
-#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || \
+#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
defined(STM32F051x8) || defined(STM32F058xx) || \
- defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __TIM15_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM15RST))
#define __TIM15_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM15RST))
-#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */
/* STM32F051x8 || STM32F058xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST))
+
+#define __USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST))
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
#if defined(STM32F091xC) || defined(STM32F098xx)
-#define __USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST))
#define __USART7_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART7RST))
#define __USART8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART8RST))
-#define __USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST))
#define __USART7_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART7RST))
#define __USART8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART8RST))
@@ -1250,13 +1323,14 @@
/** @defgroup RCCEx_Peripheral_Clock_Source_Config RCCEx Peripheral Clock Source Config
* @{
*/
-#if defined(STM32F042x6) || defined(STM32F048xx) || \
- defined(STM32F072xB) || defined(STM32F078xx)
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F070x6) || defined(STM32F070xB)
/** @brief Macro to configure the USB clock (USBCLK).
* @param __USBCLKSource__: specifies the USB clock source.
* This parameter can be one of the following values:
- * @arg RCC_USBCLKSOURCE_HSI48: HSI48 selected as USB clock
+ * @arg RCC_USBCLKSOURCE_HSI48: HSI48 selected as USB clock (not available for STM32F070x6 & STM32F070xB)
* @arg RCC_USBCLKSOURCE_PLLCLK: PLL Clock selected as USB clock
*/
#define __HAL_RCC_USB_CONFIG(__USBCLKSource__) \
@@ -1264,13 +1338,14 @@
/** @brief Macro to get the USB clock source.
* @retval The clock source can be one of the following values:
- * @arg RCC_USBCLKSOURCE_HSI48: HSI48 selected as USB clock
+ * @arg RCC_USBCLKSOURCE_HSI48: HSI48 selected as USB clock (not available for STM32F070x6 & STM32F070xB)
* @arg RCC_USBCLKSOURCE_PLLCLK: PLL Clock selected as USB clock
*/
#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USBSW)))
#endif /* STM32F042x6 || STM32F048xx || */
- /* STM32F072xB || STM32F078xx */
+ /* STM32F072xB || STM32F078xx || */
+ /* STM32F070x6 || STM32F070xB */
#if defined(STM32F042x6) || defined(STM32F048xx) || \
defined(STM32F051x8) || defined(STM32F058xx) || \
@@ -1299,9 +1374,9 @@
/* STM32F091xC || defined(STM32F098xx) */
#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || \
- defined(STM32F042x6) || defined(STM32F048xx) || \
- defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+ defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
/** @brief Macro to configure the MCO clock.
* @param __MCOCLKSource__: specifies the MCO clock source.
@@ -1348,10 +1423,33 @@
#define __HAL_RCC_MCO_CONFIG(__MCOCLKSource__, __MCODiv__) \
MODIFY_REG(RCC->CFGR, RCC_CFGR_MCO, __MCOCLKSource__)
-#endif /* STM32F030x6 || STM32F031x6 || STM32F038xx || */
- /* STM32F042x6 || STM32F048xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+#endif /* STM32F030x6 || STM32F031x6 || STM32F038xx || STM32F070x6 || */
+ /* STM32F042x6 || STM32F048xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+/** @brief Macro to configure the USART2 clock (USART2CLK).
+ * @param __USART2CLKSource__: specifies the USART2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
+ */
+#define __HAL_RCC_USART2_CONFIG(__USART2CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART2SW, (uint32_t)(__USART2CLKSource__))
+
+/** @brief Macro to get the USART2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
+ */
+#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART2SW)))
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx*/
#if defined(STM32F091xC) || defined(STM32F098xx)
/** @brief Macro to configure the USART3 clock (USART3CLK).
@@ -1374,7 +1472,7 @@
*/
#define __HAL_RCC_GET_USART3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART3SW)))
-#endif /*STM32F091xC || STM32F098xx*/
+#endif /* STM32F091xC || STM32F098xx */
/**
* @}
*/
@@ -1551,7 +1649,7 @@
void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit);
void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void);
void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo);
-RCC_CRSStatusTypeDef HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout);
+uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout);
#endif /* STM32F042x6 || STM32F048xx || */
/* STM32F071xB || STM32F072xB || STM32F078xx || */
/* STM32F091xC || STM32F098xx */
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_rtc.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_rtc.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_rtc.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of RTC HAL module. ****************************************************************************** * @attention
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_rtc_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_rtc_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_rtc_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of RTC HAL Extension module.
******************************************************************************
* @attention
@@ -116,7 +116,7 @@
* @}
*/
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB)
/** @defgroup RTCEx_Backup_Registers_Definitions RTCEx Backup Registers Definition
* @{
*/
@@ -130,7 +130,7 @@
/**
* @}
*/
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB) */
/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTCEx Time Stamp Edges definition
* @{
@@ -288,7 +288,7 @@
* @}
*/
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/** @defgroup RTCEx_Wakeup_Timer_Definitions RTCEx Wakeup Timer Definition
* @{
*/
@@ -310,7 +310,7 @@
/**
* @}
*/
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth calib period Definition
* @{
@@ -393,14 +393,14 @@
* @{
*/
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/**
* @brief Enable the RTC WakeUp Timer peripheral.
* @param __HANDLE__: specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/**
* @brief Enable the RTC TimeStamp peripheral.
@@ -409,14 +409,14 @@
*/
#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/**
* @brief Disable the RTC WakeUp Timer peripheral.
* @param __HANDLE__: specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/**
* @brief Disable the RTC TimeStamp peripheral.
@@ -463,7 +463,7 @@
*/
#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/**
* @brief Enable the RTC WakeUpTimer interrupt.
* @param __HANDLE__: specifies the RTC handle.
@@ -473,7 +473,7 @@
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/**
* @brief Disable the RTC TimeStamp interrupt.
@@ -485,7 +485,7 @@
*/
#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/**
* @brief Disable the RTC WakeUpTimer interrupt.
* @param __HANDLE__: specifies the RTC handle.
@@ -495,7 +495,7 @@
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/**
* @brief Check whether the specified RTC Tamper interrupt has occurred or not.
@@ -507,7 +507,7 @@
*/
#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/**
* @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
* @param __HANDLE__: specifies the RTC handle.
@@ -517,7 +517,7 @@
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/**
* @brief Check whether the specified RTC TimeStamp interrupt has occurred or not.
@@ -540,7 +540,7 @@
*/
#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/**
* @brief Get the selected RTC WakeUpTimer's flag status.
* @param __HANDLE__: specifies the RTC handle.
@@ -551,7 +551,7 @@
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/**
* @brief Get the selected RTC Tamper's flag status.
@@ -593,7 +593,7 @@
*/
#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/**
* @brief Clear the RTC Wake Up timer's pending flags.
* @param __HANDLE__: specifies the RTC handle.
@@ -603,7 +603,7 @@
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/**
* @}
*/
@@ -630,21 +630,21 @@
void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc);
#endif
void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
#endif
/**
* @}
*/
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/** @addtogroup RTCEx_Exported_Functions_Group2
* @{
*/
@@ -667,10 +667,10 @@
*/
/* Extension Control functions ************************************************/
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB)
void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
-#endif
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB) */
HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue);
HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_smartcard.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_smartcard.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_smartcard.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of SMARTCARD HAL module.
******************************************************************************
* @attention
@@ -43,7 +43,7 @@
extern "C" {
#endif
-#if !defined(STM32F030x4) && !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
@@ -106,7 +106,7 @@
uint16_t NACKEnable; /*!< Specifies whether the SmartCard NACK transmission is enabled
in case of parity error.
- This parameter can be a value of @ref SMARTCARD_NACK_State */
+ This parameter can be a value of @ref SMARTCARD_NACK_Enable */
uint32_t TimeOutEnable; /*!< Specifies whether the receiver timeout is enabled.
This parameter can be a value of @ref SMARTCARD_Timeout_Enable*/
@@ -173,20 +173,6 @@
}HAL_SMARTCARD_StateTypeDef;
/**
- * @brief HAL SMARTCARD Error Code structure definition
- */
-typedef enum
-{
- HAL_SMARTCARD_ERROR_NONE = 0x00, /*!< No error */
- HAL_SMARTCARD_ERROR_PE = 0x01, /*!< Parity error */
- HAL_SMARTCARD_ERROR_NE = 0x02, /*!< Noise error */
- HAL_SMARTCARD_ERROR_FE = 0x04, /*!< frame error */
- HAL_SMARTCARD_ERROR_ORE = 0x08, /*!< Overrun error */
- HAL_SMARTCARD_ERROR_DMA = 0x10, /*!< DMA transfer error */
- HAL_SMARTCARD_ERROR_RTO = 0x20 /*!< Receiver TimeOut error */
-}HAL_SMARTCARD_ErrorTypeDef;
-
-/**
* @brief SMARTCARD clock sources
*/
typedef enum
@@ -203,33 +189,34 @@
*/
typedef struct
{
- USART_TypeDef *Instance; /* USART registers base address */
+ USART_TypeDef *Instance; /*!< USART registers base address */
- SMARTCARD_InitTypeDef Init; /* SmartCard communication parameters */
+ SMARTCARD_InitTypeDef Init; /*!< SmartCard communication parameters */
- SMARTCARD_AdvFeatureInitTypeDef AdvancedInit; /* SmartCard advanced features initialization parameters */
+ SMARTCARD_AdvFeatureInitTypeDef AdvancedInit; /*!< SmartCard advanced features initialization parameters */
- uint8_t *pTxBuffPtr; /* Pointer to SmartCard Tx transfer Buffer */
+ uint8_t *pTxBuffPtr; /*!< Pointer to SmartCard Tx transfer Buffer */
- uint16_t TxXferSize; /* SmartCard Tx Transfer size */
+ uint16_t TxXferSize; /*!< SmartCard Tx Transfer size */
- uint16_t TxXferCount; /* SmartCard Tx Transfer Counter */
+ uint16_t TxXferCount; /*!< SmartCard Tx Transfer Counter */
- uint8_t *pRxBuffPtr; /* Pointer to SmartCard Rx transfer Buffer */
+ uint8_t *pRxBuffPtr; /*!< Pointer to SmartCard Rx transfer Buffer */
- uint16_t RxXferSize; /* SmartCard Rx Transfer size */
+ uint16_t RxXferSize; /*!< SmartCard Rx Transfer size */
- uint16_t RxXferCount; /* SmartCard Rx Transfer Counter */
+ uint16_t RxXferCount; /*!< SmartCard Rx Transfer Counter */
- DMA_HandleTypeDef *hdmatx; /* SmartCard Tx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmatx; /*!< SmartCard Tx DMA Handle parameters */
- DMA_HandleTypeDef *hdmarx; /* SmartCard Rx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmarx; /*!< SmartCard Rx DMA Handle parameters */
- HAL_LockTypeDef Lock; /* Locking object */
+ HAL_LockTypeDef Lock; /*!< Locking object */
- HAL_SMARTCARD_StateTypeDef State; /* SmartCard communication state */
+ HAL_SMARTCARD_StateTypeDef State; /*!< SmartCard communication state */
- HAL_SMARTCARD_ErrorTypeDef ErrorCode; /* SmartCard Error code */
+ __IO uint32_t ErrorCode; /*!< SmartCard Error code
+ This parameter can be a value of @ref SMARTCARD_Error */
}SMARTCARD_HandleTypeDef;
@@ -242,6 +229,20 @@
* @{
*/
+/** @defgroup SMARTCARD_Error SMARTCARD Error
+ * @{
+ */
+#define HAL_SMARTCARD_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_SMARTCARD_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */
+#define HAL_SMARTCARD_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */
+#define HAL_SMARTCARD_ERROR_FE ((uint32_t)0x00000004) /*!< frame error */
+#define HAL_SMARTCARD_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */
+#define HAL_SMARTCARD_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+#define HAL_SMARTCARD_ERROR_RTO ((uint32_t)0x00000020) /*!< Receiver TimeOut error */
+/**
+ * @}
+ */
+
/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length
* @{
*/
@@ -324,7 +325,8 @@
* @}
*/
-/** @defgroup SMARTCARD_NACK_State SMARTCARD NACK State
+
+/** @defgroup SMARTCARD_NACK_Enable SMARTCARD NACK Enable
* @{
*/
#define SMARTCARD_NACK_ENABLED ((uint16_t)USART_CR3_NACK)
@@ -741,7 +743,7 @@
* @}
*/
-/* Include SMARTCARD HAL Extension module */
+/* Include SMARTCARD HAL Extended module */
#include "stm32f0xx_hal_smartcard_ex.h"
@@ -804,7 +806,7 @@
* @}
*/
-#endif /* !defined(STM32F030x4) && !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#ifdef __cplusplus
}
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_smartcard_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_smartcard_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_smartcard_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of SMARTCARD HAL module.
******************************************************************************
* @attention
@@ -43,7 +43,7 @@
extern "C" {
#endif
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
@@ -318,7 +318,7 @@
* @}
*/
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#ifdef __cplusplus
}
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_smbus.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_smbus.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_smbus.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of SMBUS HAL module.
******************************************************************************
* @attention
@@ -104,42 +104,6 @@
} SMBUS_InitTypeDef;
/**
- * @brief HAL State structures definition
- */
-typedef enum
-{
- HAL_SMBUS_STATE_RESET = 0x00, /*!< SMBUS not yet initialized or disabled */
- HAL_SMBUS_STATE_READY = 0x01, /*!< SMBUS initialized and ready for use */
- HAL_SMBUS_STATE_BUSY = 0x02, /*!< SMBUS internal process is ongoing */
- HAL_SMBUS_STATE_MASTER_BUSY_TX = 0x12, /*!< Master Data Transmission process is ongoing */
- HAL_SMBUS_STATE_MASTER_BUSY_RX = 0x22, /*!< Master Data Reception process is ongoing */
- HAL_SMBUS_STATE_SLAVE_BUSY_TX = 0x32, /*!< Slave Data Transmission process is ongoing */
- HAL_SMBUS_STATE_SLAVE_BUSY_RX = 0x42, /*!< Slave Data Reception process is ongoing */
- HAL_SMBUS_STATE_TIMEOUT = 0x03, /*!< Timeout state */
- HAL_SMBUS_STATE_ERROR = 0x04, /*!< Reception process is ongoing */
- HAL_SMBUS_STATE_SLAVE_LISTEN = 0x08, /*!< Address Listen Mode is ongoing */
- /* Aliases for inter STM32 series compatibility */
- HAL_SMBUS_STATE_LISTEN = HAL_SMBUS_STATE_SLAVE_LISTEN
-}HAL_SMBUS_StateTypeDef;
-
-/**
- * @brief HAL SMBUS Error Code structure definition
- */
-typedef enum
-{
- HAL_SMBUS_ERROR_NONE = 0x00, /*!< No error */
- HAL_SMBUS_ERROR_BERR = 0x01, /*!< BERR error */
- HAL_SMBUS_ERROR_ARLO = 0x02, /*!< ARLO error */
- HAL_SMBUS_ERROR_ACKF = 0x04, /*!< ACKF error */
- HAL_SMBUS_ERROR_OVR = 0x08, /*!< OVR error */
- HAL_SMBUS_ERROR_HALTIMEOUT = 0x10, /*!< Timeout error */
- HAL_SMBUS_ERROR_BUSTIMEOUT = 0x20, /*!< Bus Timeout error */
- HAL_SMBUS_ERROR_ALERT = 0x40, /*!< Alert error */
- HAL_SMBUS_ERROR_PECERR = 0x80 /*!< PEC error */
-
-}HAL_SMBUS_ErrorTypeDef;
-
-/**
* @brief SMBUS handle Structure definition
*/
typedef struct
@@ -156,13 +120,16 @@
__IO uint32_t XferOptions; /*!< SMBUS transfer options */
- __IO HAL_SMBUS_StateTypeDef PreviousState; /*!< SMBUS communication Previous tate */
+ __IO uint32_t PreviousState; /*!< SMBUS communication Previous state
+ This parameter can be a value of @ref SMBUS_State */
HAL_LockTypeDef Lock; /*!< SMBUS locking object */
- __IO HAL_SMBUS_StateTypeDef State; /*!< SMBUS communication state */
+ __IO uint32_t State; /*!< SMBUS communication state
+ This parameter can be a value of @ref SMBUS_State */
- __IO HAL_SMBUS_ErrorTypeDef ErrorCode; /*!< SMBUS Error code */
+ __IO uint32_t ErrorCode; /*!< SMBUS Error code
+ This parameter can be a value of @ref SMBUS_Error */
}SMBUS_HandleTypeDef;
/**
@@ -175,6 +142,43 @@
* @{
*/
+/** @defgroup SMBUS_Error SMBUS Error
+ * @{
+ */
+#define HAL_SMBUS_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_SMBUS_ERROR_BERR ((uint32_t)0x00000001) /*!< BERR error */
+#define HAL_SMBUS_ERROR_ARLO ((uint32_t)0x00000002) /*!< ARLO error */
+#define HAL_SMBUS_ERROR_ACKF ((uint32_t)0x00000004) /*!< ACKF error */
+#define HAL_SMBUS_ERROR_OVR ((uint32_t)0x00000008) /*!< OVR error */
+#define HAL_SMBUS_ERROR_HALTIMEOUT ((uint32_t)0x00000010) /*!< Timeout error */
+#define HAL_SMBUS_ERROR_BUSTIMEOUT ((uint32_t)0x00000020) /*!< Bus Timeout error */
+#define HAL_SMBUS_ERROR_ALERT ((uint32_t)0x00000040) /*!< Alert error */
+#define HAL_SMBUS_ERROR_PECERR ((uint32_t)0x00000080) /*!< PEC error */
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_State SMBUS State
+ * @{
+ */
+
+#define HAL_SMBUS_STATE_RESET ((uint32_t)0x00000000) /*!< SMBUS not yet initialized or disabled */
+#define HAL_SMBUS_STATE_READY ((uint32_t)0x00000001) /*!< SMBUS initialized and ready for use */
+#define HAL_SMBUS_STATE_BUSY ((uint32_t)0x00000002) /*!< SMBUS internal process is ongoing */
+#define HAL_SMBUS_STATE_MASTER_BUSY_TX ((uint32_t)0x00000012) /*!< Master Data Transmission process is ongoing */
+#define HAL_SMBUS_STATE_MASTER_BUSY_RX ((uint32_t)0x00000022) /*!< Master Data Reception process is ongoing */
+#define HAL_SMBUS_STATE_SLAVE_BUSY_TX ((uint32_t)0x00000032) /*!< Slave Data Transmission process is ongoing */
+#define HAL_SMBUS_STATE_SLAVE_BUSY_RX ((uint32_t)0x00000042) /*!< Slave Data Reception process is ongoing */
+#define HAL_SMBUS_STATE_TIMEOUT ((uint32_t)0x00000003) /*!< Timeout state */
+#define HAL_SMBUS_STATE_ERROR ((uint32_t)0x00000004) /*!< Reception process is ongoing */
+#define HAL_SMBUS_STATE_SLAVE_LISTEN ((uint32_t)0x00000008) /*!< Address Listen Mode is ongoing */
+ /* Aliases for inter STM32 series compatibility */
+#define HAL_SMBUS_STATE_LISTEN HAL_SMBUS_STATE_SLAVE_LISTEN
+
+/**
+ * @}
+ */
+
/** @defgroup SMBUS_Analog_Filter SMBUS Analog Filter
* @{
*/
@@ -584,8 +588,8 @@
*/
/* Peripheral State and Errors functions **************************************************/
-HAL_SMBUS_StateTypeDef HAL_SMBUS_GetState(SMBUS_HandleTypeDef *hsmbus);
-uint32_t HAL_SMBUS_GetError(SMBUS_HandleTypeDef *hsmbus);
+uint32_t HAL_SMBUS_GetState(SMBUS_HandleTypeDef *hsmbus);
+uint32_t HAL_SMBUS_GetError(SMBUS_HandleTypeDef *hsmbus);
/**
* @}
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_spi.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_spi.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_spi.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of SPI HAL module.
******************************************************************************
* @attention
@@ -106,6 +106,7 @@
This parameter must 0 or 1 or 2*/
uint32_t NSSPMode; /*!< Specifies whether the NSSP signal is enabled or not .
+ This parameter can be a value of @ref SPI_NSSP_Mode
This mode is activated by the NSSP bit in the SPIx_CR2 register and
it takes effect only if the SPI interface is configured as Motorola SPI
master (FRF=0) with capture on the first edge (SPIx_CR1 CPHA = 0,
@@ -117,68 +118,52 @@
*/
typedef enum
{
- HAL_SPI_STATE_RESET = 0x00, /*!< Peripheral not Initialized */
+ HAL_SPI_STATE_RESET = 0x00, /*!< Peripheral not Initialized */
HAL_SPI_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
HAL_SPI_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
- HAL_SPI_STATE_BUSY_TX = 0x03, /*!< Data Transmission process is ongoing */
+ HAL_SPI_STATE_BUSY_TX = 0x03, /*!< Data Transmission process is ongoing */
HAL_SPI_STATE_BUSY_RX = 0x04, /*!< Data Reception process is ongoing */
- HAL_SPI_STATE_BUSY_TX_RX = 0x05, /*!< Data Transmission and Reception process is ongoing */
- HAL_SPI_STATE_TIMEOUT = 0x06, /*!< Timeout state */
- HAL_SPI_STATE_ERROR = 0x07 /*!< Data Transmission and Reception process is ongoing */
-
+ HAL_SPI_STATE_BUSY_TX_RX = 0x05, /*!< Data Transmission and Reception process is ongoing */
+ HAL_SPI_STATE_ERROR = 0x06 /*!< SPI error state */
}HAL_SPI_StateTypeDef;
/**
- * @brief HAL SPI Error Code structure definition
- */
-typedef enum
-{
- HAL_SPI_ERROR_NONE = 0x00, /*!< No error */
- HAL_SPI_ERROR_MODF = 0x01, /*!< MODF error */
- HAL_SPI_ERROR_CRC = 0x02, /*!< CRC error */
- HAL_SPI_ERROR_OVR = 0x04, /*!< OVR error */
- HAL_SPI_ERROR_FRE = 0x08, /*!< FRE error */
- HAL_SPI_ERROR_DMA = 0x10, /*!< DMA transfer error */
- HAL_SPI_ERROR_FLAG = 0x20, /*!< Error on BSY/TXE/FTLVL/FRLVL Flag */
- HAL_SPI_ERROR_UNKNOW = 0x40, /*!< Unknow Error error */
-}HAL_SPI_ErrorTypeDef;
-
-/**
* @brief SPI handle Structure definition
*/
typedef struct __SPI_HandleTypeDef
{
- SPI_TypeDef *Instance; /* SPI registers base address */
+ SPI_TypeDef *Instance; /*!< SPI registers base address */
- SPI_InitTypeDef Init; /* SPI communication parameters */
+ SPI_InitTypeDef Init; /*!< SPI communication parameters */
- uint8_t *pTxBuffPtr; /* Pointer to SPI Tx transfer Buffer */
+ uint8_t *pTxBuffPtr; /*!< Pointer to SPI Tx transfer Buffer */
- uint16_t TxXferSize; /* SPI Tx Transfer size */
+ uint16_t TxXferSize; /*!< SPI Tx Transfer size */
- uint16_t TxXferCount; /* SPI Tx Transfer Counter */
+ uint16_t TxXferCount; /*!< SPI Tx Transfer Counter */
- uint8_t *pRxBuffPtr; /* Pointer to SPI Rx transfer Buffer */
+ uint8_t *pRxBuffPtr; /*!< Pointer to SPI Rx transfer Buffer */
- uint16_t RxXferSize; /* SPI Rx Transfer size */
+ uint16_t RxXferSize; /*!< SPI Rx Transfer size */
- uint16_t RxXferCount; /* SPI Rx Transfer Counter */
+ uint16_t RxXferCount; /*!< SPI Rx Transfer Counter */
- uint32_t CRCSize; /* SPI CRC size used for the transfer */
+ uint32_t CRCSize; /*!< SPI CRC size used for the transfer */
- void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /* function pointer on Rx IRQ handler */
+ void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Rx IRQ handler */
- void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /* function pointer on Tx IRQ handler */
+ void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Tx IRQ handler */
- DMA_HandleTypeDef *hdmatx; /* SPI Tx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmatx; /*!< SPI Tx DMA Handle parameters */
- DMA_HandleTypeDef *hdmarx; /* SPI Rx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmarx; /*!< SPI Rx DMA Handle parameters */
- HAL_LockTypeDef Lock; /* Locking object */
+ HAL_LockTypeDef Lock; /*!< Locking object */
- HAL_SPI_StateTypeDef State; /* SPI communication state */
+ HAL_SPI_StateTypeDef State; /*!< SPI communication state */
- HAL_SPI_ErrorTypeDef ErrorCode; /* SPI Error code */
+ __IO uint32_t ErrorCode; /*!< SPI Error code
+ This parameter can be a value of @ref SPI_Error */
}SPI_HandleTypeDef;
@@ -192,10 +177,24 @@
* @{
*/
+/** @defgroup SPI_Error SPI Error
+ * @{
+ */
+ #define HAL_SPI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+ #define HAL_SPI_ERROR_MODF ((uint32_t)0x00000001) /*!< MODF error */
+ #define HAL_SPI_ERROR_CRC ((uint32_t)0x00000002) /*!< CRC error */
+ #define HAL_SPI_ERROR_OVR ((uint32_t)0x00000004) /*!< OVR error */
+ #define HAL_SPI_ERROR_FRE ((uint32_t)0x00000008) /*!< FRE error */
+ #define HAL_SPI_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+ #define HAL_SPI_ERROR_FLAG ((uint32_t)0x00000020) /*!< Error on BSY/TXE/FTLVL/FRLVL Flag */
+ #define HAL_SPI_ERROR_UNKNOW ((uint32_t)0x00000040) /*!< Unknow Error error */
+/**
+ * @}
+ */
+
/** @defgroup SPI_mode SPI mode
* @{
*/
-
#define SPI_MODE_SLAVE ((uint32_t)0x00000000)
#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI)
#define IS_SPI_MODE(MODE) (((MODE) == SPI_MODE_SLAVE) || \
@@ -223,23 +222,22 @@
* @}
*/
-/** @defgroup SPI_data_size SPI data size
+/** @defgroup SPI_data_size SPI Data size
* @{
*/
-
-#define SPI_DATASIZE_4BIT ((uint16_t)0x0300)
-#define SPI_DATASIZE_5BIT ((uint16_t)0x0400)
-#define SPI_DATASIZE_6BIT ((uint16_t)0x0500)
-#define SPI_DATASIZE_7BIT ((uint16_t)0x0600)
-#define SPI_DATASIZE_8BIT ((uint16_t)0x0700)
-#define SPI_DATASIZE_9BIT ((uint16_t)0x0800)
-#define SPI_DATASIZE_10BIT ((uint16_t)0x0900)
-#define SPI_DATASIZE_11BIT ((uint16_t)0x0A00)
-#define SPI_DATASIZE_12BIT ((uint16_t)0x0B00)
-#define SPI_DATASIZE_13BIT ((uint16_t)0x0C00)
-#define SPI_DATASIZE_14BIT ((uint16_t)0x0D00)
-#define SPI_DATASIZE_15BIT ((uint16_t)0x0E00)
-#define SPI_DATASIZE_16BIT ((uint16_t)0x0F00)
+#define SPI_DATASIZE_4BIT ((uint32_t)0x0300) /*!< SPI Datasize = 4bits */
+#define SPI_DATASIZE_5BIT ((uint32_t)0x0400) /*!< SPI Datasize = 5bits */
+#define SPI_DATASIZE_6BIT ((uint32_t)0x0500) /*!< SPI Datasize = 6bits */
+#define SPI_DATASIZE_7BIT ((uint32_t)0x0600) /*!< SPI Datasize = 7bits */
+#define SPI_DATASIZE_8BIT ((uint32_t)0x0700) /*!< SPI Datasize = 8bits */
+#define SPI_DATASIZE_9BIT ((uint32_t)0x0800) /*!< SPI Datasize = 9bits */
+#define SPI_DATASIZE_10BIT ((uint32_t)0x0900) /*!< SPI Datasize = 10bits */
+#define SPI_DATASIZE_11BIT ((uint32_t)0x0A00) /*!< SPI Datasize = 11bits */
+#define SPI_DATASIZE_12BIT ((uint32_t)0x0B00) /*!< SPI Datasize = 12bits */
+#define SPI_DATASIZE_13BIT ((uint32_t)0x0C00) /*!< SPI Datasize = 13bits */
+#define SPI_DATASIZE_14BIT ((uint32_t)0x0D00) /*!< SPI Datasize = 14bits */
+#define SPI_DATASIZE_15BIT ((uint32_t)0x0E00) /*!< SPI Datasize = 15bits */
+#define SPI_DATASIZE_16BIT ((uint32_t)0x0F00) /*!< SPI Datasize = 16bits */
#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DATASIZE_16BIT) || \
((DATASIZE) == SPI_DATASIZE_15BIT) || \
((DATASIZE) == SPI_DATASIZE_14BIT) || \
@@ -261,9 +259,8 @@
/** @defgroup SPI_Clock_Polarity SPI Clock Polarity
* @{
*/
-
-#define SPI_POLARITY_LOW ((uint32_t)0x00000000)
-#define SPI_POLARITY_HIGH SPI_CR1_CPOL
+#define SPI_POLARITY_LOW ((uint32_t)0x00000000) /*!< SPI polarity Low */
+#define SPI_POLARITY_HIGH SPI_CR1_CPOL /*!< SPI polarity High */
#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_POLARITY_LOW) || \
((CPOL) == SPI_POLARITY_HIGH))
/**
@@ -273,9 +270,8 @@
/** @defgroup SPI_Clock_Phase SPI Clock Phase
* @{
*/
-
-#define SPI_PHASE_1EDGE ((uint32_t)0x00000000)
-#define SPI_PHASE_2EDGE SPI_CR1_CPHA
+#define SPI_PHASE_1EDGE ((uint32_t)0x00000000) /*!< SPI Phase 1EDGE */
+#define SPI_PHASE_2EDGE SPI_CR1_CPHA /*!< SPI Phase 2EDGE */
#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_PHASE_1EDGE) || \
((CPHA) == SPI_PHASE_2EDGE))
/**
@@ -285,19 +281,17 @@
/** @defgroup SPI_Slave_Select_management SPI Slave Select management
* @{
*/
-
#define SPI_NSS_SOFT SPI_CR1_SSM
#define SPI_NSS_HARD_INPUT ((uint32_t)0x00000000)
#define SPI_NSS_HARD_OUTPUT ((uint32_t)0x00040000)
#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_SOFT) || \
((NSS) == SPI_NSS_HARD_INPUT) || \
((NSS) == SPI_NSS_HARD_OUTPUT))
-
/**
* @}
*/
-/** @defgroup SPI_NSS_pulse_management SPI NSS pulse management
+/** @defgroup SPI_NSSP_Mode SPI NSS pulse management
* @{
*/
#define SPI_NSS_PULSE_ENABLED SPI_CR2_NSSP
@@ -305,16 +299,13 @@
#define IS_SPI_NSSP(NSSP) (((NSSP) == SPI_NSS_PULSE_ENABLED) || \
((NSSP) == SPI_NSS_PULSE_DISABLED))
-
/**
* @}
*/
-
/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler
* @{
*/
-
#define SPI_BAUDRATEPRESCALER_2 ((uint32_t)0x00000000)
#define SPI_BAUDRATEPRESCALER_4 ((uint32_t)0x00000008)
#define SPI_BAUDRATEPRESCALER_8 ((uint32_t)0x00000010)
@@ -338,7 +329,6 @@
/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB transmission
* @{
*/
-
#define SPI_FIRSTBIT_MSB ((uint32_t)0x00000000)
#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST
#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FIRSTBIT_MSB) || \
@@ -350,7 +340,6 @@
/** @defgroup SPI_TI_mode SPI TI mode
* @{
*/
-
#define SPI_TIMODE_DISABLED ((uint32_t)0x00000000)
#define SPI_TIMODE_ENABLED SPI_CR2_FRF
#define IS_SPI_TIMODE(MODE) (((MODE) == SPI_TIMODE_DISABLED) || \
@@ -362,7 +351,6 @@
/** @defgroup SPI_CRC_Calculation SPI CRC Calculation
* @{
*/
-
#define SPI_CRCCALCULATION_DISABLED ((uint32_t)0x00000000)
#define SPI_CRCCALCULATION_ENABLED SPI_CR1_CRCEN
#define IS_SPI_CRC_CALCULATION(CALCULATION) (((CALCULATION) == SPI_CRCCALCULATION_DISABLED) || \
@@ -391,11 +379,11 @@
/** @defgroup SPI_FIFO_reception_threshold SPI FIFO reception threshold
* @{
* This parameter can be one of the following values:
- * SPI_RxFIFOThreshold_HF: RXNE event is generated if the FIFO
+ * SPI_RXFIFO_THRESHOLD or SPI_RXFIFO_THRESHOLD_QF :
+ * RXNE event is generated if the FIFO
* level is greater or equal to 1/2(16-bits).
- * SPI_RxFIFOThreshold_QF: RXNE event is generated if the FIFO
- * level is greater or equal to 1/4(8 bits).
- */
+ * SPI_RXFIFO_THRESHOLD_HF: RXNE event is generated if the FIFO
+ * level is greater or equal to 1/4(8 bits). */
#define SPI_RXFIFO_THRESHOLD SPI_CR2_FRXTH
#define SPI_RXFIFO_THRESHOLD_QF SPI_CR2_FRXTH
#define SPI_RXFIFO_THRESHOLD_HF ((uint32_t)0x0)
@@ -408,8 +396,8 @@
* @brief SPI Interrupt definition
* Elements values convention: 0xXXXXXXXX
* - XXXXXXXX : Interrupt control mask
- * @{
- */
+ * @{
+ */
#define SPI_IT_TXE SPI_CR2_TXEIE
#define SPI_IT_RXNE SPI_CR2_RXNEIE
#define SPI_IT_ERR SPI_CR2_ERRIE
@@ -441,12 +429,11 @@
/** @defgroup SPI_transmission_fifo_status_level SPI transmission fifo status level
* @{
*/
+#define SPI_FTLVL_EMPTY ((uint32_t)0x0000)
+#define SPI_FTLVL_QUARTER_FULL ((uint32_t)0x0800)
+#define SPI_FTLVL_HALF_FULL ((uint32_t)0x1000)
+#define SPI_FTLVL_FULL ((uint32_t)0x1800)
-#define SPI_FTLVL_EMPTY ((uint16_t)0x0000)
-#define SPI_FTLVL_QUARTER_FULL ((uint16_t)0x0800)
-#define SPI_FTLVL_HALF_FULL ((uint16_t)0x1000)
-#define SPI_FTLVL_FULL ((uint16_t)0x1800)
-
/**
* @}
*/
@@ -454,11 +441,10 @@
/** @defgroup SPI_reception_fifo_status_level SPI reception fifo status level
* @{
*/
-#define SPI_FRLVL_EMPTY ((uint16_t)0x0000)
-#define SPI_FRLVL_QUARTER_FULL ((uint16_t)0x0200)
-#define SPI_FRLVL_HALF_FULL ((uint16_t)0x0400)
-#define SPI_FRLVL_FULL ((uint16_t)0x0600)
-
+#define SPI_FRLVL_EMPTY ((uint32_t)0x0000)
+#define SPI_FRLVL_QUARTER_FULL ((uint32_t)0x0200)
+#define SPI_FRLVL_HALF_FULL ((uint32_t)0x0400)
+#define SPI_FRLVL_FULL ((uint32_t)0x0600)
/**
* @}
*/
@@ -480,23 +466,22 @@
#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
/** @brief Enables or disables the specified SPI interrupts.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * @param __INTERRUPT__ : specifies the interrupt source to enable or disable.
* This parameter can be one of the following values:
* @arg SPI_IT_TXE: Tx buffer empty interrupt enable
* @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
* @arg SPI_IT_ERR: Error interrupt enable
* @retval None
*/
-
#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
-#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (uint16_t)(~(__INTERRUPT__)))
+#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__)))
/** @brief Checks if the specified SPI interrupt source is enabled or disabled.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @param __INTERRUPT__: specifies the SPI interrupt source to check.
+ * @param __INTERRUPT__ : specifies the SPI interrupt source to check.
* This parameter can be one of the following values:
* @arg SPI_IT_TXE: Tx buffer empty interrupt enable
* @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
@@ -506,9 +491,9 @@
#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
/** @brief Checks whether the specified SPI flag is set or not.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @param __FLAG__: specifies the flag to check.
+ * @param __FLAG__ : specifies the flag to check.
* This parameter can be one of the following values:
* @arg SPI_FLAG_RXNE: Receive buffer not empty flag
* @arg SPI_FLAG_TXE: Transmit buffer empty flag
@@ -517,73 +502,86 @@
* @arg SPI_FLAG_OVR: Overrun flag
* @arg SPI_FLAG_BSY: Busy flag
* @arg SPI_FLAG_FRE: Frame format error flag
+ * @arg SPI_FLAG_FTLVL: SPI fifo transmission level
+ * @arg SPI_FLAG_FRLVL: SPI fifo reception level
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
/** @brief Clears the SPI CRCERR pending flag.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR))
/** @brief Clears the SPI MODF pending flag.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
*
* @retval None
*/
-#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) do{(__HANDLE__)->Instance->SR;\
- (__HANDLE__)->Instance->CR1 &= (uint16_t)(~SPI_CR1_SPE);}while(0)
+#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) do{\
+ __IO uint32_t tmpreg;\
+ tmpreg = (__HANDLE__)->Instance->SR;\
+ UNUSED(tmpreg); \
+ (__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE);\
+ }while(0)
/** @brief Clears the SPI OVR pending flag.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
*
* @retval None
*/
-#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) do{(__HANDLE__)->Instance->DR;\
- (__HANDLE__)->Instance->SR;}while(0)
-
+#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) do{ \
+ __IO uint32_t tmpreg; \
+ tmpreg = (__HANDLE__)->Instance->DR; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg); \
+ } while(0)
+
/** @brief Clears the SPI FRE pending flag.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
*
* @retval None
*/
-#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR)
-
+#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) do{\
+ __IO uint32_t tmpreg;\
+ tmpreg = ((__HANDLE__)->Instance->SR);\
+ UNUSED(tmpreg); \
+ }while(0)
/** @brief Enables the SPI.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
#define __HAL_SPI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_SPE)
/** @brief Disables the SPI.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
-#define __HAL_SPI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (uint16_t)(~SPI_CR1_SPE))
+#define __HAL_SPI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE))
/** @brief Sets the SPI transmit-only mode.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
#define __HAL_SPI_1LINE_TX(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_BIDIOE)
/** @brief Sets the SPI receive-only mode.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
-#define __HAL_SPI_1LINE_RX(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (uint16_t)(~SPI_CR1_BIDIOE))
+#define __HAL_SPI_1LINE_RX(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (~SPI_CR1_BIDIOE))
/** @brief Resets the CRC calculation of the SPI.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
@@ -629,10 +627,18 @@
HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_FlushRxFifo(SPI_HandleTypeDef *hspi);
+
void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi);
void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi);
void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi);
void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi);
void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
/**
* @}
@@ -644,6 +650,7 @@
/* Peripheral State and Error functions ***************************************/
HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi);
+uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
/**
* @}
*/
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_tim.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_tim.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_tim.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of TIM HAL module.
******************************************************************************
* @attention
@@ -290,7 +290,7 @@
TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */
HAL_TIM_ActiveChannel Channel; /*!< Active channel */
DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array
- This array is accessed by a @ref DMA_Handle_index */
+ This array is accessed by a @ref TIM_DMA_Handle_index */
HAL_LockTypeDef Lock; /*!< Locking object */
__IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */
}TIM_HandleTypeDef;
@@ -1117,7 +1117,7 @@
* @}
*/
-/** @defgroup DMA_Handle_index TIM DMA Handle Index
+/** @defgroup TIM_DMA_Handle_index TIM DMA Handle Index
* @{
*/
#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0) /*!< Index of the DMA handle used for Update DMA requests */
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_tim_ex.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_tim_ex.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_tim_ex.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of TIM HAL Extended module. ****************************************************************************** * @attention
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_tsc.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_tsc.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_tsc.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief This file contains all the functions prototypes for the TSC firmware * library. ******************************************************************************
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_uart.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_uart.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_uart.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of UART HAL module.
******************************************************************************
* @attention
@@ -142,22 +142,6 @@
} UART_AdvFeatureInitTypeDef;
/**
- * @brief UART wake up from stop mode parameters
- */
-typedef struct
-{
- uint32_t WakeUpEvent; /*!< Specifies which event will activat the Wakeup from Stop mode flag (WUF).
- This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection.
- If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must
- be filled up. */
-
- uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long.
- This parameter can be a value of @ref UART_WakeUp_Address_Length */
-
- uint8_t Address; /*!< UART/USART node address (7-bit long max) */
-} UART_WakeUpTypeDef;
-
-/**
* @brief HAL UART State structures definition
*/
typedef enum
@@ -172,19 +156,6 @@
HAL_UART_STATE_ERROR = 0x04 /*!< Error */
}HAL_UART_StateTypeDef;
-/**
- * @brief HAL UART Error Code structure definition
- */
-typedef enum
-{
- HAL_UART_ERROR_NONE = 0x00, /*!< No error */
- HAL_UART_ERROR_PE = 0x01, /*!< Parity error */
- HAL_UART_ERROR_NE = 0x02, /*!< Noise error */
- HAL_UART_ERROR_FE = 0x04, /*!< frame error */
- HAL_UART_ERROR_ORE = 0x08, /*!< Overrun error */
- HAL_UART_ERROR_DMA = 0x10 /*!< DMA transfer error */
-}HAL_UART_ErrorTypeDef;
-
/**
* @brief UART clock sources definition
*/
@@ -202,35 +173,36 @@
*/
typedef struct
{
- USART_TypeDef *Instance; /* UART registers base address */
+ USART_TypeDef *Instance; /*!< UART registers base address */
- UART_InitTypeDef Init; /* UART communication parameters */
+ UART_InitTypeDef Init; /*!< UART communication parameters */
- UART_AdvFeatureInitTypeDef AdvancedInit; /* UART Advanced Features initialization parameters */
+ UART_AdvFeatureInitTypeDef AdvancedInit; /*!< UART Advanced Features initialization parameters */
- uint8_t *pTxBuffPtr; /* Pointer to UART Tx transfer Buffer */
+ uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */
- uint16_t TxXferSize; /* UART Tx Transfer size */
+ uint16_t TxXferSize; /*!< UART Tx Transfer size */
- uint16_t TxXferCount; /* UART Tx Transfer Counter */
+ uint16_t TxXferCount; /*!< UART Tx Transfer Counter */
- uint8_t *pRxBuffPtr; /* Pointer to UART Rx transfer Buffer */
+ uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */
- uint16_t RxXferSize; /* UART Rx Transfer size */
+ uint16_t RxXferSize; /*!< UART Rx Transfer size */
- uint16_t RxXferCount; /* UART Rx Transfer Counter */
+ uint16_t RxXferCount; /*!< UART Rx Transfer Counter */
- uint16_t Mask; /* UART Rx RDR register mask */
+ uint16_t Mask; /*!< UART Rx RDR register mask */
- DMA_HandleTypeDef *hdmatx; /* UART Tx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */
- DMA_HandleTypeDef *hdmarx; /* UART Rx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */
- HAL_LockTypeDef Lock; /* Locking object */
+ HAL_LockTypeDef Lock; /*!< Locking object */
- HAL_UART_StateTypeDef State; /* UART communication state */
+ HAL_UART_StateTypeDef State; /*!< UART communication state */
- HAL_UART_ErrorTypeDef ErrorCode; /* UART Error code */
+ __IO uint32_t ErrorCode; /*!< UART Error code
+ This parameter can be a value of @ref UART_Error */
}UART_HandleTypeDef;
@@ -243,13 +215,28 @@
* @{
*/
+/** @defgroup UART_Error UART Error
+ * @{
+ */
+#define HAL_UART_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_UART_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */
+#define HAL_UART_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */
+#define HAL_UART_ERROR_FE ((uint32_t)0x00000004) /*!< frame error */
+#define HAL_UART_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */
+#define HAL_UART_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
/** @defgroup UART_Stop_Bits UART Number of Stop Bits
* @{
*/
#define UART_STOPBITS_1 ((uint32_t)0x0000)
#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+#define UART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
- ((STOPBITS) == UART_STOPBITS_2))
+ ((STOPBITS) == UART_STOPBITS_2) || \
+ ((STOPBITS) == UART_STOPBITS_1_5))
/**
* @}
*/
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_uart_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_uart_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_uart_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of UART HAL Extension module.
******************************************************************************
* @attention
@@ -55,6 +55,31 @@
*/
/* Exported types ------------------------------------------------------------*/
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+/** @defgroup UARTEx_Exported_Types UARTEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief UART wake up from stop mode parameters
+ */
+typedef struct
+{
+ uint32_t WakeUpEvent; /*!< Specifies which event will activat the Wakeup from Stop mode flag (WUF).
+ This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection.
+ If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must
+ be filled up. */
+
+ uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long.
+ This parameter can be a value of @ref UART_WakeUp_Address_Length */
+
+ uint8_t Address; /*!< UART/USART node address (7-bit long max) */
+} UART_WakeUpTypeDef;
+/**
+ * @}
+ */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+
/* Exported constants --------------------------------------------------------*/
/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants
* @{
@@ -63,9 +88,9 @@
/** @defgroup UARTEx_Word_Length UARTEx Word Length
* @{
*/
-#if defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx)
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define UART_WORDLENGTH_7B ((uint32_t)USART_CR1_M1)
#define UART_WORDLENGTH_8B ((uint32_t)0x00000000)
#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
@@ -77,9 +102,9 @@
#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \
((LENGTH) == UART_WORDLENGTH_9B))
-#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx) */
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
* @}
*/
@@ -87,9 +112,9 @@
/** @defgroup UARTEx_AutoBaud_Rate_Mode UARTEx Advanced Feature AutoBaud Rate Mode
* @{
*/
-#if defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx)
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x0000)
#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0)
#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME ((uint32_t)USART_CR2_ABRMODE_1)
@@ -103,15 +128,15 @@
#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0)
#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(MODE) (((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \
((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE))
-#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx) */
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
* @}
*/
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/** @defgroup UARTEx_LIN UARTEx Local Interconnection Network mode
* @{
*/
@@ -133,7 +158,7 @@
/**
* @}
*/
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
/** @defgroup UART_Flags UARTEx Status Flags
* Elements values convention: 0xXXXX
@@ -142,24 +167,24 @@
*/
#define UART_FLAG_REACK ((uint32_t)0x00400000)
#define UART_FLAG_TEACK ((uint32_t)0x00200000)
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_FLAG_WUF ((uint32_t)0x00100000)
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#define UART_FLAG_RWU ((uint32_t)0x00080000)
#define UART_FLAG_SBKF ((uint32_t)0x00040000
#define UART_FLAG_CMF ((uint32_t)0x00020000)
#define UART_FLAG_BUSY ((uint32_t)0x00010000)
#define UART_FLAG_ABRF ((uint32_t)0x00008000)
#define UART_FLAG_ABRE ((uint32_t)0x00004000)
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8)
#define UART_FLAG_EOBF ((uint32_t)0x00001000)
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
#define UART_FLAG_RTOF ((uint32_t)0x00000800)
#define UART_FLAG_CTS ((uint32_t)0x00000400)
#define UART_FLAG_CTSIF ((uint32_t)0x00000200)
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_FLAG_LBDF ((uint32_t)0x00000100)
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#define UART_FLAG_TXE ((uint32_t)0x00000080)
#define UART_FLAG_TC ((uint32_t)0x00000040)
#define UART_FLAG_RXNE ((uint32_t)0x00000020)
@@ -173,13 +198,13 @@
*/
/** @defgroup UART_Interrupt_definition UARTEx Interrupts Definition
- * Elements values convention: 0000ZZZZ0XXYYYYYb
+ * Elements values convention: 0000ZZZZZ0XXYYYYYb
* - YYYYY : Interrupt source position in the XX register (5bits)
* - XX : Interrupt source register (2bits)
* - 01: CR1 register
* - 10: CR2 register
* - 11: CR3 register
- * - ZZZZ : Flag position in the ISR register(4bits)
+ * - ZZZZZ : Flag position in the ISR register(5bits)
* @{
*/
#define UART_IT_PE ((uint16_t)0x0028)
@@ -187,14 +212,14 @@
#define UART_IT_TC ((uint16_t)0x0626)
#define UART_IT_RXNE ((uint16_t)0x0525)
#define UART_IT_IDLE ((uint16_t)0x0424)
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_IT_LBD ((uint16_t)0x0846)
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#define UART_IT_CTS ((uint16_t)0x096A)
-#define UART_IT_CM ((uint16_t)0x142E)
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#define UART_IT_CM ((uint16_t)0x112E)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_IT_WUF ((uint16_t)0x1476)
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
/**
* @}
*/
@@ -209,16 +234,16 @@
#define UART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */
#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag (not available on F030xx devices)*/
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */
#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */
#define UART_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */
#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
/**
* @}
*/
@@ -247,7 +272,7 @@
* @}
*/
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/** @defgroup UART_Stop_Mode_Enable UARTEx Advanced Feature Stop Mode Enable
* @{
*/
@@ -271,7 +296,7 @@
/**
* @}
*/
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
/**
* @}
@@ -312,7 +337,7 @@
break; \
} \
} while(0)
-#elif defined (STM32F030x8) || \
+#elif defined (STM32F030x8) || defined (STM32F070x6) || \
defined (STM32F042x6) || defined (STM32F048xx) || \
defined (STM32F051x8) || defined (STM32F058xx)
#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
@@ -347,6 +372,47 @@
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
} \
} while(0)
+#elif defined(STM32F070xB)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
@@ -496,6 +562,55 @@
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
} \
} while(0)
+#elif defined(STM32F030xC)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
#endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */
@@ -509,9 +624,9 @@
* @param __HANDLE__: specifies the UART Handle
* @retval none
*/
-#if defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx)
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define __HAL_UART_MASK_COMPUTATION(__HANDLE__) \
do { \
if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \
@@ -574,9 +689,9 @@
} \
} \
} while(0)
-#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx) */
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
* @}
*/
@@ -591,23 +706,25 @@
* @{
*/
/* Initialization and de-initialization functions ****************************/
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t UART_DEPolarity, uint32_t UART_DEAssertionTime, uint32_t UART_DEDeassertionTime);
HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
-HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
-HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart);
-HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart);
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
/**
* @}
*/
/** @addtogroup UARTEx_Exported_Functions_Group2
- * @brief Extended I/O operation functions
+ * @brief Extended UART Interrupt handling function
* @{
*/
-/* I/O operation functions ***************************************************/
+/* IO operation functions ***************************************************/
void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
void HAL_UART_WakeupCallback(UART_HandleTypeDef *huart);
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
/**
* @}
*/
@@ -618,9 +735,13 @@
*/
/* Peripheral Control functions **********************************************/
-void UART_AdvFeatureConfig(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength);
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6) && !defined(STM32F030xC)
+HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
+HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
/**
* @}
*/
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_usart.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_usart.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_usart.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of USART HAL module.
******************************************************************************
* @attention
@@ -112,19 +112,6 @@
}HAL_USART_StateTypeDef;
/**
- * @brief HAL USART Error Code structure definition
- */
-typedef enum
-{
- HAL_USART_ERROR_NONE = 0x00, /*!< No error */
- HAL_USART_ERROR_PE = 0x01, /*!< Parity error */
- HAL_USART_ERROR_NE = 0x02, /*!< Noise error */
- HAL_USART_ERROR_FE = 0x04, /*!< frame error */
- HAL_USART_ERROR_ORE = 0x08, /*!< Overrun error */
- HAL_USART_ERROR_DMA = 0x10 /*!< DMA transfer error */
-}HAL_USART_ErrorTypeDef;
-
-/**
* @brief USART clock sources definitions
*/
typedef enum
@@ -163,11 +150,12 @@
DMA_HandleTypeDef *hdmarx; /*!< USART Rx DMA Handle parameters */
- HAL_LockTypeDef Lock; /*!< Locking object */
+ HAL_LockTypeDef Lock; /*!< Locking object */
- HAL_USART_StateTypeDef State; /*!< USART communication state */
+ HAL_USART_StateTypeDef State; /*!< USART communication state */
- HAL_USART_ErrorTypeDef ErrorCode; /*!< USART Error code */
+ __IO uint32_t ErrorCode; /*!< USART Error code
+ This parameter can be a value of @ref USART_Error */
}USART_HandleTypeDef;
@@ -180,15 +168,26 @@
* @{
*/
+/** @defgroup USART_Error USART Error
+ * @{
+ */
+#define HAL_USART_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_USART_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */
+#define HAL_USART_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */
+#define HAL_USART_ERROR_FE ((uint32_t)0x00000004) /*!< frame error */
+#define HAL_USART_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */
+#define HAL_USART_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
/** @defgroup USART_Stop_Bits USART Number of Stop Bits
* @{
*/
#define USART_STOPBITS_1 ((uint32_t)0x0000)
-#define USART_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0)
#define USART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
#define USART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_STOPBITS_1) || \
- ((STOPBITS) == USART_STOPBITS_0_5) || \
((STOPBITS) == USART_STOPBITS_1_5) || \
((STOPBITS) == USART_STOPBITS_2))
/**
@@ -525,7 +524,6 @@
HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart);
void HAL_USART_MspInit(USART_HandleTypeDef *husart);
void HAL_USART_MspDeInit(USART_HandleTypeDef *husart);
-void HAL_USART_SetConfig(USART_HandleTypeDef *husart);
HAL_StatusTypeDef HAL_USART_CheckIdleState(USART_HandleTypeDef *husart);
/**
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_usart_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_usart_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_usart_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of USART HAL Extension module.
******************************************************************************
* @attention
@@ -63,9 +63,9 @@
/** @defgroup USARTEx_Word_Length USARTEx Word Length
* @{
*/
-#if defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx)
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define USART_WORDLENGTH_7B ((uint32_t)USART_CR1_M1)
#define USART_WORDLENGTH_8B ((uint32_t)0x00000000)
#define USART_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
@@ -77,9 +77,9 @@
#define USART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WORDLENGTH_8B) || \
((LENGTH) == USART_WORDLENGTH_9B))
-#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || defined (STM32F070xB) || \
defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx) */
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
* @}
*/
@@ -121,7 +121,7 @@
break; \
} \
} while(0)
-#elif defined (STM32F030x8) || \
+#elif defined (STM32F030x8) || defined (STM32F070x6) || \
defined (STM32F042x6) || defined (STM32F048xx) || \
defined (STM32F051x8) || defined (STM32F058xx)
#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
@@ -156,6 +156,47 @@
(__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
} \
} while(0)
+#elif defined (STM32F070xB)
+#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
@@ -304,7 +345,56 @@
{ \
(__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
} \
- } while(0)
+ } while(0)
+#elif defined(STM32F030xC)
+#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
#endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */
@@ -317,9 +407,9 @@
* @param __HANDLE__: specifies the USART Handle
* @retval none
*/
-#if defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx)
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define __HAL_USART_MASK_COMPUTATION(__HANDLE__) \
do { \
if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_9B) \
@@ -382,9 +472,9 @@
} \
} \
} while(0)
-#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx) */
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
* @}
*/
--- a/TARGET_NUCLEO_F030R8/stm32f0xx_hal_wwdg.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F030R8/stm32f0xx_hal_wwdg.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_wwdg.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of WWDG HAL module.
******************************************************************************
* @attention
@@ -81,10 +81,10 @@
This parameter can be a value of @ref WWDG_Prescaler */
uint32_t Window; /*!< Specifies the WWDG window value to be compared to the downcounter.
- This parameter must be a number lower than Max_Data = 0x80 */
+ This parameter must be a number lower than Max_Data = 0x80 */
uint32_t Counter; /*!< Specifies the WWDG free-running downcounter value.
- This parameter must be a number between Min_Data = 0x40 and Max_Data = 0x7F */
+ This parameter must be a number between Min_Data = 0x40 and Max_Data = 0x7F */
} WWDG_InitTypeDef;
@@ -113,24 +113,10 @@
* @{
*/
-/** @defgroup WWDG_BitAddress_AliasRegion WWDG BitAddress AliasRegion
- * @brief WWDG registers bit address in the alias region
- * @{
- */
-
-/* --- CFR Register ---*/
-/* Alias word address of EWI bit */
-#define CFR_BASE (uint32_t)(WWDG_BASE + 0x04)
-
-/**
- * @}
- */
-
/** @defgroup WWDG_Interrupt_definition WWDG Interrupt definition
* @{
*/
-#define WWDG_IT_EWI ((uint32_t)WWDG_CFR_EWI)
-
+#define WWDG_IT_EWI WWDG_CFR_EWI /*!< Early wakeup interrupt */
/**
* @}
*/
@@ -139,8 +125,7 @@
* @brief WWDG Flag definition
* @{
*/
-#define WWDG_FLAG_EWIF ((uint32_t)WWDG_SR_EWIF) /*!< Early wakeup interrupt flag */
-
+#define WWDG_FLAG_EWIF WWDG_SR_EWIF /*!< Early wakeup interrupt flag */
/**
* @}
*/
@@ -148,16 +133,15 @@
/** @defgroup WWDG_Prescaler WWDG Prescaler
* @{
*/
-#define WWDG_PRESCALER_1 ((uint32_t)0x00000000) /*!< WWDG counter clock = (PCLK1/4096)/1 */
-#define WWDG_PRESCALER_2 ((uint32_t)WWDG_CFR_WDGTB0) /*!< WWDG counter clock = (PCLK1/4096)/2 */
-#define WWDG_PRESCALER_4 ((uint32_t)WWDG_CFR_WDGTB1) /*!< WWDG counter clock = (PCLK1/4096)/4 */
-#define WWDG_PRESCALER_8 ((uint32_t)WWDG_CFR_WDGTB) /*!< WWDG counter clock = (PCLK1/4096)/8 */
+#define WWDG_PRESCALER_1 ((uint32_t)0x00000000) /*!< WWDG counter clock = (PCLK1/4096)/1 */
+#define WWDG_PRESCALER_2 WWDG_CFR_WDGTB0 /*!< WWDG counter clock = (PCLK1/4096)/2 */
+#define WWDG_PRESCALER_4 WWDG_CFR_WDGTB1 /*!< WWDG counter clock = (PCLK1/4096)/4 */
+#define WWDG_PRESCALER_8 WWDG_CFR_WDGTB /*!< WWDG counter clock = (PCLK1/4096)/8 */
-#define IS_WWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == WWDG_PRESCALER_1) || \
- ((__PRESCALER__) == WWDG_PRESCALER_2) || \
- ((__PRESCALER__) == WWDG_PRESCALER_4) || \
- ((__PRESCALER__) == WWDG_PRESCALER_8))
-
+#define IS_WWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == WWDG_PRESCALER_1) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_2) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_4) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_8))
/**
* @}
*/
@@ -165,8 +149,7 @@
/** @defgroup WWDG_Window WWDG Window
* @{
*/
-#define IS_WWDG_WINDOW(__WINDOW__) ((__WINDOW__) <= 0x7F)
-
+#define IS_WWDG_WINDOW(__WINDOW__) ((__WINDOW__) <= 0x7F)
/**
* @}
*/
@@ -174,8 +157,7 @@
/** @defgroup WWDG_Counter WWDG Counter
* @{
*/
-#define IS_WWDG_COUNTER(__COUNTER__) (((__COUNTER__) >= 0x40) && ((__COUNTER__) <= 0x7F))
-
+#define IS_WWDG_COUNTER(__COUNTER__) (((__COUNTER__) >= 0x40) && ((__COUNTER__) <= 0x7F))
/**
* @}
*/
@@ -194,14 +176,65 @@
* @param __HANDLE__: WWDG handle
* @retval None
*/
-#define __HAL_WWDG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_WWDG_STATE_RESET)
+#define __HAL_WWDG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_WWDG_STATE_RESET)
/**
* @brief Enables the WWDG peripheral.
* @param __HANDLE__: WWDG handle
* @retval None
*/
-#define __HAL_WWDG_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, WWDG_CR_WDGA)
+#define __HAL_WWDG_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= WWDG_CR_WDGA)
+
+/**
+ * @brief Disables the WWDG peripheral.
+ * @param __HANDLE__: WWDG handle
+ * @note WARNING: This is a dummy macro for HAL code alignment.
+ * Once enable, WWDG Peripheral cannot be disabled except by a system reset.
+ * @retval None
+ */
+#define __HAL_WWDG_DISABLE(__HANDLE__) /* dummy macro */
+
+/**
+ * @brief Enables the WWDG early wakeup interrupt.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the interrupt to enable.
+ * This parameter can be one of the following values:
+ * @arg WWDG_IT_EWI: Early wakeup interrupt
+ * @note Once enabled this interrupt cannot be disabled except by a system reset.
+ * @retval None
+ */
+#define __HAL_WWDG_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CFR |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the WWDG early wakeup interrupt.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the interrupt to disable.
+ * This parameter can be one of the following values:
+ * @arg WWDG_IT_EWI: Early wakeup interrupt
+ * @note WARNING: This is a dummy macro for HAL code alignment.
+ * Once enabled this interrupt cannot be disabled except by a system reset.
+ * @retval None
+ */
+#define __HAL_WWDG_DISABLE_IT(__HANDLE__, __INTERRUPT__) /* dummy macro */
+
+/**
+ * @brief Gets the selected WWDG's it status.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the it to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt IT
+ * @retval The new state of WWDG_FLAG (SET or RESET).
+ */
+#define __HAL_WWDG_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/** @brief Clear the WWDG's interrupt pending bits
+ * bits to clear the selected interrupt pending bits.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ */
+#define __HAL_WWDG_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
/**
* @brief Gets the selected WWDG's flag status.
@@ -211,7 +244,7 @@
* @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
* @retval The new state of WWDG_FLAG (SET or RESET).
*/
-#define __HAL_WWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+#define __HAL_WWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
/**
* @brief Clears the WWDG's pending flags.
@@ -221,26 +254,16 @@
* @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
* @retval None
*/
-#define __HAL_WWDG_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__))
+#define __HAL_WWDG_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
-/**
- * @brief Enables the WWDG early wakeup interrupt.
- * @param __INTERRUPT__: specifies the interrupt to enable.
- * This parameter can be one of the following values:
- * @arg WWDG_IT_EWI: Early wakeup interrupt
- * @note Once enabled this interrupt cannot be disabled except by a system reset.
- * @retval None
+/** @brief Checks if the specified WWDG interrupt source is enabled or disabled.
+ * @param __HANDLE__: WWDG Handle.
+ * @param __INTERRUPT__: specifies the WWDG interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_IT_EWI: Early Wakeup Interrupt
+ * @retval state of __INTERRUPT__ (TRUE or FALSE).
*/
-#define __HAL_WWDG_ENABLE_IT(__INTERRUPT__) (*(__IO uint32_t *) CFR_BASE |= (__INTERRUPT__))
-
-/** @brief Clear the WWDG's interrupt pending bits
- * bits to clear the selected interrupt pending bits.
- * @param __HANDLE__: WWDG handle
- * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
- * This parameter can be one of the following values:
- * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
- */
-#define __HAL_WWDG_CLEAR_IT(__HANDLE__, __INTERRUPT__) __HAL_WWDG_CLEAR_FLAG((__HANDLE__), (__INTERRUPT__))
+#define __HAL_WWDG_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CFR & (__INTERRUPT__)) == (__INTERRUPT__))
/**
* @}
--- a/TARGET_NUCLEO_F030R8/system_stm32f0xx.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F030R8/system_stm32f0xx.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file system_stm32f0xx.h * @author MCD Application Team - * @version V2.1.0 - * @date 03-Oct-2014 + * @version V2.2.0 + * @date 05-December-2014 * @brief CMSIS Cortex-M0 Device System Source File for STM32F0xx devices. ****************************************************************************** * @attention
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/TARGET_STM/TARGET_NUCLEO_F070RB/PeripheralNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,77 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE
+} ADCName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE,
+ UART_3 = (int)USART3_BASE,
+ UART_4 = (int)USART4_BASE
+} UARTName;
+
+#define STDIO_UART_TX PA_2
+#define STDIO_UART_RX PA_3
+#define STDIO_UART UART_2
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_14 = (int)TIM14_BASE,
+ PWM_15 = (int)TIM15_BASE,
+ PWM_16 = (int)TIM16_BASE,
+ PWM_17 = (int)TIM17_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_F070RB/TARGET_STM/TARGET_NUCLEO_F070RB/PeripheralPins.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,62 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_PERIPHERALPINS_H +#define MBED_PERIPHERALPINS_H + +#include "pinmap.h" +#include "PeripheralNames.h" + +//*** ADC *** + +extern const PinMap PinMap_ADC[]; + +//*** I2C *** + +extern const PinMap PinMap_I2C_SDA[]; +extern const PinMap PinMap_I2C_SCL[]; + +//*** PWM *** + +extern const PinMap PinMap_PWM[]; + +//*** SERIAL *** + +extern const PinMap PinMap_UART_TX[]; +extern const PinMap PinMap_UART_RX[]; + +//*** SPI *** + +extern const PinMap PinMap_SPI_MOSI[]; +extern const PinMap PinMap_SPI_MISO[]; +extern const PinMap PinMap_SPI_SCLK[]; +extern const PinMap PinMap_SPI_SSEL[]; + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/TARGET_STM/TARGET_NUCLEO_F070RB/PinNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,183 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f0xx_hal_gpio.h and stm32f0xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_11 = 0x1B,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_2 = 0x32,
+
+ PF_0 = 0x50,
+ PF_1 = 0x51,
+
+ // Arduino connector namings
+ A0 = PA_0,
+ A1 = PA_1,
+ A2 = PA_4,
+ A3 = PB_0,
+ A4 = PC_1,
+ A5 = PC_0,
+ D0 = PA_3,
+ D1 = PA_2,
+ D2 = PA_10,
+ D3 = PB_3,
+ D4 = PB_5,
+ D5 = PB_4,
+ D6 = PB_10,
+ D7 = PA_8,
+ D8 = PA_9,
+ D9 = PC_7,
+ D10 = PB_6,
+ D11 = PA_7,
+ D12 = PA_6,
+ D13 = PA_5,
+ D14 = PB_9,
+ D15 = PB_8,
+
+ // Generic signals namings
+ LED1 = PA_5,
+ LED2 = PA_5,
+ LED3 = PA_5,
+ LED4 = PA_5,
+ USER_BUTTON = PC_13,
+ SERIAL_TX = PA_2,
+ SERIAL_RX = PA_3,
+ USBTX = PA_2,
+ USBRX = PA_3,
+ I2C_SCL = PB_8,
+ I2C_SDA = PB_9,
+ SPI_MOSI = PA_7,
+ SPI_MISO = PA_6,
+ SPI_SCK = PA_5,
+ SPI_CS = PB_6,
+ PWM_OUT = PB_3,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/TARGET_STM/TARGET_NUCLEO_F070RB/PortNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,48 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortF = 5
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_F070RB/TARGET_STM/TARGET_NUCLEO_F070RB/device.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,70 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 // Not present on this device + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/TARGET_STM/TARGET_NUCLEO_F070RB/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,75 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_GPIO_OBJECT_H
+#define MBED_GPIO_OBJECT_H
+
+#include "mbed_assert.h"
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ uint32_t mask;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_set;
+ __IO uint32_t *reg_clr;
+} gpio_t;
+
+static inline void gpio_write(gpio_t *obj, int value)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ if (value) {
+ *obj->reg_set = obj->mask;
+ } else {
+ *obj->reg_clr = obj->mask;
+ }
+}
+
+static inline int gpio_read(gpio_t *obj)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ return ((*obj->reg_in & obj->mask) ? 1 : 0);
+}
+
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/TARGET_STM/TARGET_NUCLEO_F070RB/objects.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,104 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index; // Used by irq
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t period;
+ uint32_t pulse;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/startup_stm32f070xb.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f070xb.sct Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,45 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2014, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32F070RB: 128KB FLASH (0x20000) + 16KB RAM (0x4000)
+
+ LR_IROM1 0x08000000 0x20000 { ; load region size_region
+ ER_IROM1 0x08000000 0x20000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; 48 vectors = 192 bytes (0xC0) to be reserved in RAM
+ RW_IRAM1 (0x20000000+0xC0) (0x4000-0xC0) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+}
+
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_MICRO/system_stm32f0xx.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/startup_stm32f070xb.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f070xb.sct Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,45 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2014, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32F070RB: 128KB FLASH (0x20000) + 16KB RAM (0x4000)
+
+ LR_IROM1 0x08000000 0x20000 { ; load region size_region
+ ER_IROM1 0x08000000 0x20000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; 48 vectors = 192 bytes (0xC0) to be reserved in RAM
+ RW_IRAM1 (0x20000000+0xC0) (0x4000-0xC0) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+}
+
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_ARM_STD/system_stm32f0xx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/STM32F070XB.ld Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,153 @@
+/* Linker script to configure memory regions. */
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 128k
+ RAM (xrw) : ORIGIN = 0x200000C0, LENGTH = 16k - 0x0C0
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ * _estack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.isr_vector))
+ *(.text*)
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+ _sidata = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ _sdata = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ KEEP(*(.jcr*))
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+ _edata = .;
+
+ } > RAM
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start__ = .;
+ _sbss = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ _ebss = .;
+ } > RAM
+
+ .heap (COPY):
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy (COPY):
+ {
+ *(.stack*)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ _estack = __StackTop;
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/hal_tick.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/startup_stm32f070xb.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_GCC_ARM/system_stm32f0xx.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/startup_stm32f070xb.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f070xb.icf Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,30 @@
+/* [ROM = 128kb = 0x20000] */
+define symbol __intvec_start__ = 0x08000000;
+define symbol __region_ROM_start__ = 0x08000000;
+define symbol __region_ROM_end__ = 0x0801FFFF;
+
+/* [RAM = 16kb = 0x4000] Vector table dynamic copy: 48 vectors = 192 bytes (0xC0) to be reserved in RAM */
+define symbol __NVIC_start__ = 0x20000000;
+define symbol __NVIC_end__ = 0x200000BF; /* Aligned on 8 bytes */
+define symbol __region_RAM_start__ = 0x200000C0;
+define symbol __region_RAM_end__ = 0x20003FFF;
+
+/* Memory regions */
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __region_ROM_start__ to __region_ROM_end__];
+define region RAM_region = mem:[from __region_RAM_start__ to __region_RAM_end__];
+
+/* Stack and Heap */
+define symbol __size_cstack__ = 0x800;
+define symbol __size_heap__ = 0x800;
+define block CSTACK with alignment = 8, size = __size_cstack__ { };
+define block HEAP with alignment = 8, size = __size_heap__ { };
+define block STACKHEAP with fixed order { block HEAP, block CSTACK };
+
+initialize by copy with packing = zeros { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite, block STACKHEAP };
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F070RB/TOOLCHAIN_IAR/system_stm32f0xx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_F070RB/cmsis.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,38 @@ +/* mbed Microcontroller Library + * A generic CMSIS include header + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_CMSIS_H +#define MBED_CMSIS_H + +#include "stm32f0xx.h" +#include "cmsis_nvic.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/cmsis_nvic.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,54 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F
+// MCU Peripherals: 32 vectors = 128 bytes from 0x40 to 0xBF
+// Total: 48 vectors = 192 bytes (0xC0) to be reserved in RAM
+#define NVIC_NUM_VECTORS 48
+#define NVIC_USER_IRQ_OFFSET 16
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
+uint32_t NVIC_GetVector(IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/core_ca9.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,271 @@
+/**************************************************************************//**
+ * @file core_ca9.h
+ * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File
+ * @version
+ * @date 25 March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CA9_H_GENERIC
+#define __CORE_CA9_H_GENERIC
+
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_A9
+ @{
+ */
+
+/* CMSIS CA9 definitions */
+#define __CA9_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CA9_CMSIS_VERSION_SUB (0x10) /*!< [15:0] CMSIS HAL sub version */
+#define __CA9_CMSIS_VERSION ((__CA9_CMSIS_VERSION_MAIN << 16) | \
+ __CA9_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_A (0x09) /*!< Cortex-A Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /*!< standard types definitions */
+#include "core_caInstr.h" /*!< Core Instruction Access */
+#include "core_caFunc.h" /*!< Core Function Access */
+#include "core_cm4_simd.h" /*!< Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CA9_H_DEPENDANT
+#define __CORE_CA9_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CA9_REV
+ #define __CA9_REV 0x0000
+ #warning "__CA9_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 1
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 1
+ #endif
+
+ #if __Vendor_SysTickConfig == 0
+ #error "__Vendor_SysTickConfig set to 0, but vendor systick timer must be supplied for Cortex-A9"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_A9 */
+
+
+/*******************************************************************************
+ * Register Abstraction
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-A processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t reserved1:7; /*!< bit: 20..23 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/*@} end of group CMSIS_CORE */
+
+/*@} end of CMSIS_Core_FPUFunctions */
+
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/core_caFunc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,592 @@
+/**************************************************************************//**
+ * @file core_caFunc.h
+ * @brief CMSIS Cortex-A Core Function Access Header File
+ * @version V3.10
+ * @date 9 May 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CAFUNC_H__
+#define __CORE_CAFUNC_H__
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get CPSR Register
+
+ This function returns the content of the CPSR Register.
+
+ \return CPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_CPSR(void)
+{
+ register uint32_t __regCPSR __ASM("cpsr");
+ return(__regCPSR);
+}
+
+/** \brief Set Stack Pointer
+
+ This function assigns the given value to the current stack pointer.
+
+ \param [in] topOfStack Stack Pointer value to set
+ */
+register uint32_t __regSP __ASM("sp");
+__STATIC_INLINE void __set_SP(uint32_t topOfStack)
+{
+ __regSP = topOfStack;
+}
+
+
+/** \brief Get link register
+
+ This function returns the value of the link register
+
+ \return Value of link register
+ */
+register uint32_t __reglr __ASM("lr");
+__STATIC_INLINE uint32_t __get_LR(void)
+{
+ return(__reglr);
+}
+
+/** \brief Set link register
+
+ This function sets the value of the link register
+
+ \param [in] lr LR value to set
+ */
+__STATIC_INLINE void __set_LR(uint32_t lr)
+{
+ __reglr = lr;
+}
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_PSP(uint32_t topOfProcStack)
+{
+ ARM
+ PRESERVE8
+
+ BIC R0, R0, #7 ;ensure stack is 8-byte aligned
+ MRS R1, CPSR
+ CPS #MODE_SYS ;no effect in USR mode
+ MOV SP, R0
+ MSR CPSR_c, R1 ;no effect in USR mode
+ ISB
+ BX LR
+
+}
+
+/** \brief Set User Mode
+
+ This function changes the processor state to User Mode
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_CPS_USR(void)
+{
+ ARM
+
+ CPS #MODE_USR
+ BX LR
+}
+
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+/** \brief Get FPEXC
+
+ This function returns the current value of the Floating Point Exception Control register.
+
+ \return Floating Point Exception Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPEXC(void)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ return(__regfpexc);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPEXC
+
+ This function assigns the given value to the Floating Point Exception Control register.
+
+ \param [in] fpscr Floating Point Exception Control value to set
+ */
+__STATIC_INLINE void __set_FPEXC(uint32_t fpexc)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ __regfpexc = (fpexc);
+#endif
+}
+
+/** \brief Get CPACR
+
+ This function returns the current value of the Coprocessor Access Control register.
+
+ \return Coprocessor Access Control register value
+ */
+__STATIC_INLINE uint32_t __get_CPACR(void)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ return __regCPACR;
+}
+
+/** \brief Set CPACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] cpacr Coporcessor Acccess Control value to set
+ */
+__STATIC_INLINE void __set_CPACR(uint32_t cpacr)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ __regCPACR = cpacr;
+ __ISB();
+}
+
+/** \brief Get CBAR
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Configuration Base Address register value
+ */
+__STATIC_INLINE uint32_t __get_CBAR() {
+ register uint32_t __regCBAR __ASM("cp15:4:c15:c0:0");
+ return(__regCBAR);
+}
+
+/** \brief Get TTBR0
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Translation Table Base Register 0 value
+ */
+__STATIC_INLINE uint32_t __get_TTBR0() {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ return(__regTTBR0);
+}
+
+/** \brief Set TTBR0
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] ttbr0 Translation Table Base Register 0 value to set
+ */
+__STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ __regTTBR0 = ttbr0;
+ __ISB();
+}
+
+/** \brief Get DACR
+
+ This function returns the value of the Domain Access Control Register.
+
+ \return Domain Access Control Register value
+ */
+__STATIC_INLINE uint32_t __get_DACR() {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ return(__regDACR);
+}
+
+/** \brief Set DACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] dacr Domain Access Control Register value to set
+ */
+__STATIC_INLINE void __set_DACR(uint32_t dacr) {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ __regDACR = dacr;
+ __ISB();
+}
+
+/******************************** Cache and BTAC enable ****************************************************/
+
+/** \brief Set SCTLR
+
+ This function assigns the given value to the System Control Register.
+
+ \param [in] sctlr System Control Register, value to set
+ */
+__STATIC_INLINE void __set_SCTLR(uint32_t sctlr)
+{
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ __regSCTLR = sctlr;
+}
+
+/** \brief Get SCTLR
+
+ This function returns the value of the System Control Register.
+
+ \return System Control Register value
+ */
+__STATIC_INLINE uint32_t __get_SCTLR() {
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ return(__regSCTLR);
+}
+
+/** \brief Enable Caches
+
+ Enable Caches
+ */
+__STATIC_INLINE void __enable_caches(void) {
+ // Set I bit 12 to enable I Cache
+ // Set C bit 2 to enable D Cache
+ __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief Disable Caches
+
+ Disable Caches
+ */
+__STATIC_INLINE void __disable_caches(void) {
+ // Clear I bit 12 to disable I Cache
+ // Clear C bit 2 to disable D Cache
+ __set_SCTLR( __get_SCTLR() & ~(1 << 12) & ~(1 << 2));
+ __ISB();
+}
+
+/** \brief Enable BTAC
+
+ Enable BTAC
+ */
+__STATIC_INLINE void __enable_btac(void) {
+ // Set Z bit 11 to enable branch prediction
+ __set_SCTLR( __get_SCTLR() | (1 << 11));
+ __ISB();
+}
+
+/** \brief Disable BTAC
+
+ Disable BTAC
+ */
+__STATIC_INLINE void __disable_btac(void) {
+ // Clear Z bit 11 to disable branch prediction
+ __set_SCTLR( __get_SCTLR() & ~(1 << 11));
+}
+
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __enable_mmu(void) {
+ // Set M bit 0 to enable the MMU
+ // Set AFE bit to enable simplified access permissions model
+ // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+ __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+ __ISB();
+}
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __disable_mmu(void) {
+ // Clear M bit 0 to disable the MMU
+ __set_SCTLR( __get_SCTLR() & ~1);
+ __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief Invalidate the whole tlb
+
+ TLBIALL. Invalidate the whole tlb
+ */
+
+__STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+ register uint32_t __TLBIALL __ASM("cp15:0:c8:c7:0");
+ __TLBIALL = 0;
+ __DSB();
+ __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief Invalidate entire branch predictor array
+
+ BPIALL. Branch Predictor Invalidate All.
+ */
+
+__STATIC_INLINE void __v7_inv_btac(void) {
+ register uint32_t __BPIALL __ASM("cp15:0:c7:c5:6");
+ __BPIALL = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief Invalidate the whole I$
+
+ ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+__STATIC_INLINE void __v7_inv_icache_all(void) {
+ register uint32_t __ICIALLU __ASM("cp15:0:c7:c5:0");
+ __ICIALLU = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new I cache state
+}
+
+/** \brief Clean D$ by MVA
+
+ DCCMVAC. Data cache clean by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_dcache_mva(void *va) {
+ register uint32_t __DCCMVAC __ASM("cp15:0:c7:c10:1");
+ __DCCMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Invalidate D$ by MVA
+
+ DCIMVAC. Data cache invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_inv_dcache_mva(void *va) {
+ register uint32_t __DCIMVAC __ASM("cp15:0:c7:c6:1");
+ __DCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Clean and Invalidate D$ by MVA
+
+ DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+ register uint32_t __DCCIMVAC __ASM("cp15:0:c7:c14:1");
+ __DCCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief
+ * Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency.
+ */
+#pragma push
+#pragma arm
+__STATIC_ASM void __v7_all_cache(uint32_t op) {
+ ARM
+
+ PUSH {R4-R11}
+
+ MRC p15, 1, R6, c0, c0, 1 // Read CLIDR
+ ANDS R3, R6, #0x07000000 // Extract coherency level
+ MOV R3, R3, LSR #23 // Total cache levels << 1
+ BEQ Finished // If 0, no need to clean
+
+ MOV R10, #0 // R10 holds current cache level << 1
+Loop1 ADD R2, R10, R10, LSR #1 // R2 holds cache "Set" position
+ MOV R1, R6, LSR R2 // Bottom 3 bits are the Cache-type for this level
+ AND R1, R1, #7 // Isolate those lower 3 bits
+ CMP R1, #2
+ BLT Skip // No cache or only instruction cache at this level
+
+ MCR p15, 2, R10, c0, c0, 0 // Write the Cache Size selection register
+ ISB // ISB to sync the change to the CacheSizeID reg
+ MRC p15, 1, R1, c0, c0, 0 // Reads current Cache Size ID register
+ AND R2, R1, #7 // Extract the line length field
+ ADD R2, R2, #4 // Add 4 for the line length offset (log2 16 bytes)
+ LDR R4, =0x3FF
+ ANDS R4, R4, R1, LSR #3 // R4 is the max number on the way size (right aligned)
+ CLZ R5, R4 // R5 is the bit position of the way size increment
+ LDR R7, =0x7FFF
+ ANDS R7, R7, R1, LSR #13 // R7 is the max number of the index size (right aligned)
+
+Loop2 MOV R9, R4 // R9 working copy of the max way size (right aligned)
+
+Loop3 ORR R11, R10, R9, LSL R5 // Factor in the Way number and cache number into R11
+ ORR R11, R11, R7, LSL R2 // Factor in the Set number
+ CMP R0, #0
+ BNE Dccsw
+ MCR p15, 0, R11, c7, c6, 2 // DCISW. Invalidate by Set/Way
+ B cont
+Dccsw CMP R0, #1
+ BNE Dccisw
+ MCR p15, 0, R11, c7, c10, 2 // DCCSW. Clean by Set/Way
+ B cont
+Dccisw MCR p15, 0, R11, c7, c14, 2 // DCCISW, Clean and Invalidate by Set/Way
+cont SUBS R9, R9, #1 // Decrement the Way number
+ BGE Loop3
+ SUBS R7, R7, #1 // Decrement the Set number
+ BGE Loop2
+Skip ADD R10, R10, #2 // increment the cache number
+ CMP R3, R10
+ BGT Loop1
+
+Finished
+ DSB
+ POP {R4-R11}
+ BX lr
+
+}
+#pragma pop
+
+/** \brief __v7_all_cache - helper function
+
+ */
+
+/** \brief Invalidate the whole D$
+
+ DCISW. Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_inv_dcache_all(void) {
+ __v7_all_cache(0);
+}
+
+/** \brief Clean the whole D$
+
+ DCCSW. Clean by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_dcache_all(void) {
+ __v7_all_cache(1);
+}
+
+/** \brief Clean and invalidate the whole D$
+
+ DCCISW. Clean and Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_inv_dcache_all(void) {
+ __v7_all_cache(2);
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__ICCARM__)) /*---------------- ICC Compiler ---------------------*/
+
+#error IAR Compiler support not implemented for Cortex-A
+
+#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
+
+//#error GNU Compiler support not implemented for Cortex-A
+
+#elif (defined (__TASKING__)) /*--------------- TASKING Compiler -----------------*/
+
+#error TASKING Compiler support not implemented for Cortex-A
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CAFUNC_H__ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_F070RB/core_caInstr.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,45 @@ +/**************************************************************************//** + * @file core_caInstr.h + * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File + * @version + * @date 04. December 2012 + * + * @note + * + ******************************************************************************/ +/* Copyright (c) 2009 - 2012 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + +#ifndef __CORE_CAINSTR_H__ +#define __CORE_CAINSTR_H__ + +#define __CORTEX_M 0x3 +#include "core_cmInstr.h" +#undef __CORTEX_M + +#endif +
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/core_ca_mmu.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,848 @@
+;/**************************************************************************//**
+; * @file core_ca_mmu.h
+; * @brief MMU Startup File for
+; * VE_A9_MP Device Series
+; * @version V1.01
+; * @date 25 March 2013
+; *
+; * @note
+; *
+; ******************************************************************************/
+;/* Copyright (c) 2012 ARM LIMITED
+;
+; All rights reserved.
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+; - Redistributions of source code must retain the above copyright
+; notice, this list of conditions and the following disclaimer.
+; - Redistributions in binary form must reproduce the above copyright
+; notice, this list of conditions and the following disclaimer in the
+; documentation and/or other materials provided with the distribution.
+; - Neither the name of ARM nor the names of its contributors may be used
+; to endorse or promote products derived from this software without
+; specific prior written permission.
+; *
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+; ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+; LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+; CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+; SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+; INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+; CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+; ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+; POSSIBILITY OF SUCH DAMAGE.
+; ---------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef _MMU_FUNC_H
+#define _MMU_FUNC_H
+
+#define SECTION_DESCRIPTOR (0x2)
+#define SECTION_MASK (0xFFFFFFFC)
+
+#define SECTION_TEXCB_MASK (0xFFFF8FF3)
+#define SECTION_B_SHIFT (2)
+#define SECTION_C_SHIFT (3)
+#define SECTION_TEX0_SHIFT (12)
+#define SECTION_TEX1_SHIFT (13)
+#define SECTION_TEX2_SHIFT (14)
+
+#define SECTION_XN_MASK (0xFFFFFFEF)
+#define SECTION_XN_SHIFT (4)
+
+#define SECTION_DOMAIN_MASK (0xFFFFFE1F)
+#define SECTION_DOMAIN_SHIFT (5)
+
+#define SECTION_P_MASK (0xFFFFFDFF)
+#define SECTION_P_SHIFT (9)
+
+#define SECTION_AP_MASK (0xFFFF73FF)
+#define SECTION_AP_SHIFT (10)
+#define SECTION_AP2_SHIFT (15)
+
+#define SECTION_S_MASK (0xFFFEFFFF)
+#define SECTION_S_SHIFT (16)
+
+#define SECTION_NG_MASK (0xFFFDFFFF)
+#define SECTION_NG_SHIFT (17)
+
+#define SECTION_NS_MASK (0xFFF7FFFF)
+#define SECTION_NS_SHIFT (19)
+
+
+#define PAGE_L1_DESCRIPTOR (0x1)
+#define PAGE_L1_MASK (0xFFFFFFFC)
+
+#define PAGE_L2_4K_DESC (0x2)
+#define PAGE_L2_4K_MASK (0xFFFFFFFD)
+
+#define PAGE_L2_64K_DESC (0x1)
+#define PAGE_L2_64K_MASK (0xFFFFFFFC)
+
+#define PAGE_4K_TEXCB_MASK (0xFFFFFE33)
+#define PAGE_4K_B_SHIFT (2)
+#define PAGE_4K_C_SHIFT (3)
+#define PAGE_4K_TEX0_SHIFT (6)
+#define PAGE_4K_TEX1_SHIFT (7)
+#define PAGE_4K_TEX2_SHIFT (8)
+
+#define PAGE_64K_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_64K_B_SHIFT (2)
+#define PAGE_64K_C_SHIFT (3)
+#define PAGE_64K_TEX0_SHIFT (12)
+#define PAGE_64K_TEX1_SHIFT (13)
+#define PAGE_64K_TEX2_SHIFT (14)
+
+#define PAGE_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_B_SHIFT (2)
+#define PAGE_C_SHIFT (3)
+#define PAGE_TEX_SHIFT (12)
+
+#define PAGE_XN_4K_MASK (0xFFFFFFFE)
+#define PAGE_XN_4K_SHIFT (0)
+#define PAGE_XN_64K_MASK (0xFFFF7FFF)
+#define PAGE_XN_64K_SHIFT (15)
+
+
+#define PAGE_DOMAIN_MASK (0xFFFFFE1F)
+#define PAGE_DOMAIN_SHIFT (5)
+
+#define PAGE_P_MASK (0xFFFFFDFF)
+#define PAGE_P_SHIFT (9)
+
+#define PAGE_AP_MASK (0xFFFFFDCF)
+#define PAGE_AP_SHIFT (4)
+#define PAGE_AP2_SHIFT (9)
+
+#define PAGE_S_MASK (0xFFFFFBFF)
+#define PAGE_S_SHIFT (10)
+
+#define PAGE_NG_MASK (0xFFFFF7FF)
+#define PAGE_NG_SHIFT (11)
+
+#define PAGE_NS_MASK (0xFFFFFFF7)
+#define PAGE_NS_SHIFT (3)
+
+#define OFFSET_1M (0x00100000)
+#define OFFSET_64K (0x00010000)
+#define OFFSET_4K (0x00001000)
+
+#define DESCRIPTOR_FAULT (0x00000000)
+
+/* ########################### MMU Function Access ########################### */
+/** \ingroup MMU_FunctionInterface
+ \defgroup MMU_Functions MMU Functions Interface
+ @{
+ */
+
+/* Attributes enumerations */
+
+/* Region size attributes */
+typedef enum
+{
+ SECTION,
+ PAGE_4k,
+ PAGE_64k,
+} mmu_region_size_Type;
+
+/* Region type attributes */
+typedef enum
+{
+ NORMAL,
+ DEVICE,
+ SHARED_DEVICE,
+ NON_SHARED_DEVICE,
+ STRONGLY_ORDERED
+} mmu_memory_Type;
+
+/* Region cacheability attributes */
+typedef enum
+{
+ NON_CACHEABLE,
+ WB_WA,
+ WT,
+ WB_NO_WA,
+} mmu_cacheability_Type;
+
+/* Region parity check attributes */
+typedef enum
+{
+ ECC_DISABLED,
+ ECC_ENABLED,
+} mmu_ecc_check_Type;
+
+/* Region execution attributes */
+typedef enum
+{
+ EXECUTE,
+ NON_EXECUTE,
+} mmu_execute_Type;
+
+/* Region global attributes */
+typedef enum
+{
+ GLOBAL,
+ NON_GLOBAL,
+} mmu_global_Type;
+
+/* Region shareability attributes */
+typedef enum
+{
+ NON_SHARED,
+ SHARED,
+} mmu_shared_Type;
+
+/* Region security attributes */
+typedef enum
+{
+ SECURE,
+ NON_SECURE,
+} mmu_secure_Type;
+
+/* Region access attributes */
+typedef enum
+{
+ NO_ACCESS,
+ RW,
+ READ,
+} mmu_access_Type;
+
+/* Memory Region definition */
+typedef struct RegionStruct {
+ mmu_region_size_Type rg_t;
+ mmu_memory_Type mem_t;
+ uint8_t domain;
+ mmu_cacheability_Type inner_norm_t;
+ mmu_cacheability_Type outer_norm_t;
+ mmu_ecc_check_Type e_t;
+ mmu_execute_Type xn_t;
+ mmu_global_Type g_t;
+ mmu_secure_Type sec_t;
+ mmu_access_Type priv_t;
+ mmu_access_Type user_t;
+ mmu_shared_Type sh_t;
+
+} mmu_region_attributes_Type;
+
+/** \brief Set section execution-never attribute
+
+ The function sets section execution-never attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] xn Section execution-never attribute : EXECUTE , NON_EXECUTE.
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_section(uint32_t *descriptor_l1, mmu_execute_Type xn)
+{
+ *descriptor_l1 &= SECTION_XN_MASK;
+ *descriptor_l1 |= ((xn & 0x1) << SECTION_XN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section domain
+
+ The function sets section domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Section domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_section(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= SECTION_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xF) << SECTION_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section parity check
+
+ The function sets section parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_section(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set section access privileges
+
+ The function sets section access privileges
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_section(uint32_t *descriptor_l1, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x6; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l1 &= SECTION_AP_MASK;
+ *descriptor_l1 |= (ap & 0x3) << SECTION_AP_SHIFT;
+ *descriptor_l1 |= ((ap & 0x4)>>2) << SECTION_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set section shareability
+
+ The function sets section shareability
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_section(uint32_t *descriptor_l1, mmu_shared_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_S_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Global attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] g_bit Section attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_section(uint32_t *descriptor_l1, mmu_global_Type g_bit)
+{
+ *descriptor_l1 &= SECTION_NG_MASK;
+ *descriptor_l1 |= ((g_bit & 0x1) << SECTION_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Security attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_section(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_NS_SHIFT);
+ return 0;
+}
+
+/* Page 4k or 64k */
+/** \brief Set 4k/64k page execution-never attribute
+
+ The function sets 4k/64k page execution-never attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] xn Page execution-never attribute : EXECUTE , NON_EXECUTE.
+ \param [in] page Page size: PAGE_4k, PAGE_64k,
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_page(uint32_t *descriptor_l2, mmu_execute_Type xn, mmu_region_size_Type page)
+{
+ if (page == PAGE_4k)
+ {
+ *descriptor_l2 &= PAGE_XN_4K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_4K_SHIFT);
+ }
+ else
+ {
+ *descriptor_l2 &= PAGE_XN_64K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_64K_SHIFT);
+ }
+ return 0;
+}
+
+/** \brief Set 4k/64k page domain
+
+ The function sets 4k/64k page domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Page domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_page(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= PAGE_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xf) << PAGE_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page parity check
+
+ The function sets 4k/64k page parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_page(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page access privileges
+
+ The function sets 4k/64k page access privileges
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_page(uint32_t *descriptor_l2, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x6; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l2 &= PAGE_AP_MASK;
+ *descriptor_l2 |= (ap & 0x3) << PAGE_AP_SHIFT;
+ *descriptor_l2 |= ((ap & 0x4)>>2) << PAGE_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page shareability
+
+ The function sets 4k/64k page shareability
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] s_bit 4k/64k page shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_page(uint32_t *descriptor_l2, mmu_shared_Type s_bit)
+{
+ *descriptor_l2 &= PAGE_S_MASK;
+ *descriptor_l2 |= ((s_bit & 0x1) << PAGE_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Global attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] g_bit 4k/64k page attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_page(uint32_t *descriptor_l2, mmu_global_Type g_bit)
+{
+ *descriptor_l2 &= PAGE_NG_MASK;
+ *descriptor_l2 |= ((g_bit & 0x1) << PAGE_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Security attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit 4k/64k page Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_page(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= PAGE_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << PAGE_NS_SHIFT);
+ return 0;
+}
+
+
+/** \brief Set Section memory attributes
+
+ The function sets section memory attributes
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] mem Section memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_section(uint32_t *descriptor_l1, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner)
+{
+ *descriptor_l1 &= SECTION_TEXCB_MASK;
+
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l1 |= 1 << SECTION_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT) | (1 << SECTION_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT) | (1 << SECTION_TEX0_SHIFT);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page memory attributes
+
+ The function sets 4k/64k page memory attributes
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] mem 4k/64k page memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_page(uint32_t *descriptor_l2, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner, mmu_region_size_Type page)
+{
+ *descriptor_l2 &= PAGE_4K_TEXCB_MASK;
+
+ if (page == PAGE_64k)
+ {
+ //same as section
+ __memory_section(descriptor_l2, mem, outer, inner);
+ }
+ else
+ {
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l2 |= 1 << PAGE_4K_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT) | (1 << PAGE_4K_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT) | (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Create a L1 section descriptor
+
+ The function creates a section descriptor.
+
+ Assumptions:
+ - 16MB super sections not suported
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg Section attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_section_descriptor(uint32_t *descriptor, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+
+ __memory_section(descriptor, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t);
+ __xn_section(descriptor,reg.xn_t);
+ __domain_section(descriptor, reg.domain);
+ __p_section(descriptor, reg.e_t);
+ __ap_section(descriptor, reg.priv_t, reg.user_t, 1);
+ __shared_section(descriptor,reg.sh_t);
+ __global_section(descriptor,reg.g_t);
+ __secure_section(descriptor,reg.sec_t);
+ *descriptor &= SECTION_MASK;
+ *descriptor |= SECTION_DESCRIPTOR;
+
+ return 0;
+
+}
+
+
+/** \brief Create a L1 and L2 4k/64k page descriptor
+
+ The function creates a 4k/64k page descriptor.
+ Assumptions:
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg 4k/64k page attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_page_descriptor(uint32_t *descriptor, uint32_t *descriptor2, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+ *descriptor2 = 0;
+
+ switch (reg.rg_t)
+ {
+ case PAGE_4k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_4k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_4k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_4K_MASK;
+ *descriptor2 |= PAGE_L2_4K_DESC;
+ break;
+
+ case PAGE_64k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_64k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_64k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_64K_MASK;
+ *descriptor2 |= PAGE_L2_64K_DESC;
+ break;
+
+ case SECTION:
+ //error
+ break;
+
+ }
+
+ return 0;
+
+}
+
+/** \brief Create a 1MB Section
+
+ \param [in] ttb Translation table base address
+ \param [in] base_address Section base address
+ \param [in] count Number of sections to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTSection(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1)
+{
+ uint32_t offset;
+ uint32_t entry;
+ uint32_t i;
+
+ offset = base_address >> 20;
+ entry = (base_address & 0xFFF00000) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb = ttb + offset;
+
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb++ = entry;
+ entry += OFFSET_1M;
+ }
+}
+
+/** \brief Create a 4k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 4k base address
+ \param [in] count Number of 4k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_4k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFFF000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_4K;
+ }
+}
+
+/** \brief Create a 64k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 64k base address
+ \param [in] count Number of 64k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_64k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i,j;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFF0000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //create 16 entries
+ for (j = 0; j < 16; j++)
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_64K;
+ }
+}
+
+/*@} end of MMU_Functions */
+#endif
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/core_cm0.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,682 @@
+/**************************************************************************//**
+ * @file core_cm0.h
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M0
+ @{
+ */
+
+/* CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/core_cm0plus.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,793 @@
+/**************************************************************************//**
+ * @file core_cm0plus.h
+ * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0PLUS_H_GENERIC
+#define __CORE_CM0PLUS_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex-M0+
+ @{
+ */
+
+/* CMSIS CM0P definitions */
+#define __CM0PLUS_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0PLUS_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16) | \
+ __CM0PLUS_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0PLUS_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0PLUS_H_DEPENDANT
+#define __CORE_CM0PLUS_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0PLUS_REV
+ #define __CM0PLUS_REV 0x0000
+ #warning "__CM0PLUS_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __VTOR_PRESENT
+ #define __VTOR_PRESENT 0
+ #warning "__VTOR_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex-M0+ */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+#if (__VTOR_PRESENT == 1)
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+#else
+ uint32_t RESERVED0;
+#endif
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if (__VTOR_PRESENT == 1)
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 8 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 8 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0+ Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0PLUS_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/core_cm3.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1627 @@
+/**************************************************************************//**
+ * @file core_cm3.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM3_H_GENERIC
+#define __CORE_CM3_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M3
+ @{
+ */
+
+/* CMSIS CM3 definitions */
+#define __CM3_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | \
+ __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x03) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI__VFP_SUPPORT____
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM3_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM3_H_DEPENDANT
+#define __CORE_CM3_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM3_REV
+ #define __CM3_REV 0x0200
+ #warning "__CM3_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M3 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#if (__CM3_REV < 0x0201) /* core r2p1 */
+#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#else
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+#else
+ uint32_t RESERVED1[1];
+#endif
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM3_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/core_cm4.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1772 @@
+/**************************************************************************//**
+ * @file core_cm4.h
+ * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_H_GENERIC
+#define __CORE_CM4_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M4
+ @{
+ */
+
+/* CMSIS CM4 definitions */
+#define __CM4_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM4_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16) | \
+ __CM4_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x04) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+#include <core_cm4_simd.h> /* Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CM4_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM4_H_DEPENDANT
+#define __CORE_CM4_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM4_REV
+ #define __CM4_REV 0x0000
+ #warning "__CM4_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 0
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M4 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ - Core FPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISOOFP_Pos 9 /*!< ACTLR: DISOOFP Position */
+#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */
+
+#define SCnSCB_ACTLR_DISFPCA_Pos 8 /*!< ACTLR: DISFPCA Position */
+#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_FPU Floating Point Unit (FPU)
+ \brief Type definitions for the Floating Point Unit (FPU)
+ @{
+ */
+
+/** \brief Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __IO uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
+ __IO uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
+ __IO uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
+ __I uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
+ __I uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register */
+#define FPU_FPCCR_ASPEN_Pos 31 /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos 30 /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos 8 /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos 6 /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos 5 /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos 4 /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos 3 /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos 1 /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos 0 /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk (1UL << FPU_FPCCR_LSPACT_Pos) /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register */
+#define FPU_FPCAR_ADDRESS_Pos 3 /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register */
+#define FPU_FPDSCR_AHP_Pos 26 /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos 25 /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos 24 /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos 22 /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 */
+#define FPU_MVFR0_FP_rounding_modes_Pos 28 /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos 24 /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos 20 /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos 16 /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos 12 /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos 8 /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos 4 /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos 0 /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL << FPU_MVFR0_A_SIMD_registers_Pos) /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 */
+#define FPU_MVFR1_FP_fused_MAC_Pos 28 /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos 24 /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos 4 /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos 0 /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk (0xFUL << FPU_MVFR1_FtZ_mode_Pos) /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+#if (__FPU_PRESENT == 1)
+ #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
+ #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+/* NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); enable interrupt */
+ NVIC->ISER[(uint32_t)((int32_t)IRQn) >> 5] = (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM4_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/core_cm4_simd.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,673 @@
+/**************************************************************************//**
+ * @file core_cm4_simd.h
+ * @brief CMSIS Cortex-M4 SIMD Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_SIMD_H
+#define __CORE_CM4_SIMD_H
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ ******************************************************************************/
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#define __SADD8 __sadd8
+#define __QADD8 __qadd8
+#define __SHADD8 __shadd8
+#define __UADD8 __uadd8
+#define __UQADD8 __uqadd8
+#define __UHADD8 __uhadd8
+#define __SSUB8 __ssub8
+#define __QSUB8 __qsub8
+#define __SHSUB8 __shsub8
+#define __USUB8 __usub8
+#define __UQSUB8 __uqsub8
+#define __UHSUB8 __uhsub8
+#define __SADD16 __sadd16
+#define __QADD16 __qadd16
+#define __SHADD16 __shadd16
+#define __UADD16 __uadd16
+#define __UQADD16 __uqadd16
+#define __UHADD16 __uhadd16
+#define __SSUB16 __ssub16
+#define __QSUB16 __qsub16
+#define __SHSUB16 __shsub16
+#define __USUB16 __usub16
+#define __UQSUB16 __uqsub16
+#define __UHSUB16 __uhsub16
+#define __SASX __sasx
+#define __QASX __qasx
+#define __SHASX __shasx
+#define __UASX __uasx
+#define __UQASX __uqasx
+#define __UHASX __uhasx
+#define __SSAX __ssax
+#define __QSAX __qsax
+#define __SHSAX __shsax
+#define __USAX __usax
+#define __UQSAX __uqsax
+#define __UHSAX __uhsax
+#define __USAD8 __usad8
+#define __USADA8 __usada8
+#define __SSAT16 __ssat16
+#define __USAT16 __usat16
+#define __UXTB16 __uxtb16
+#define __UXTAB16 __uxtab16
+#define __SXTB16 __sxtb16
+#define __SXTAB16 __sxtab16
+#define __SMUAD __smuad
+#define __SMUADX __smuadx
+#define __SMLAD __smlad
+#define __SMLADX __smladx
+#define __SMLALD __smlald
+#define __SMLALDX __smlaldx
+#define __SMUSD __smusd
+#define __SMUSDX __smusdx
+#define __SMLSD __smlsd
+#define __SMLSDX __smlsdx
+#define __SMLSLD __smlsld
+#define __SMLSLDX __smlsldx
+#define __SEL __sel
+#define __QADD __qadd
+#define __QSUB __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
+ ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
+
+#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
+ ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
+
+#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+ ((int64_t)(ARG3) << 32) ) >> 32))
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_iar.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_ccs.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLALD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLALDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLSLD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLSLDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ if (ARG3 == 0) \
+ __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
+ else \
+ __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+/* not yet supported */
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CORE_CM4_SIMD_H */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/core_cmFunc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,636 @@
+/**************************************************************************//**
+ * @file core_cmFunc.h
+ * @brief CMSIS Cortex-M Core Function Access Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ register uint32_t __regIPSR __ASM("ipsr");
+ return(__regIPSR);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ register uint32_t __regXPSR __ASM("xpsr");
+ return(__regXPSR);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ return(__regProcessStackPointer);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ __regProcessStackPointer = topOfProcStack;
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ return(__regMainStackPointer);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ __regMainStackPointer = topOfMainStack;
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0xff);
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/** \brief Enable IRQ Interrupts
+
+ This function enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ uint32_t result;
+
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all instrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CMFUNC_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/core_cmInstr.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,688 @@
+/**************************************************************************//**
+ * @file core_cmInstr.h
+ * @brief CMSIS Cortex-M Core Instruction Access Header File
+ * @version V3.20
+ * @date 05. March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __nop
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+#define __WFI __wfi
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __wfe
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __sev
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+#define __ISB() __isb(0xF)
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() __dsb(0xF)
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() __dmb(0xF)
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __rev
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+ rev16 r0, r0
+ bx lr
+}
+#endif
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+ revsh r0, r0
+ bx lr
+}
+#endif
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+#define __ROR __ror
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __breakpoint(value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __RBIT __rbit
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXB(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXH(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXW(value, ptr) __strex(value, ptr)
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+#define __CLREX __clrex
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT __ssat
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __usat
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __clz
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constrant "l"
+ * Otherwise, use general registers, specified by constrant "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __NOP(void)
+{
+ __ASM volatile ("nop");
+}
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFI(void)
+{
+ __ASM volatile ("wfi");
+}
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFE(void)
+{
+ __ASM volatile ("wfe");
+}
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __SEV(void)
+{
+ __ASM volatile ("sev");
+}
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ISB(void)
+{
+ __ASM volatile ("isb");
+}
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DSB(void)
+{
+ __ASM volatile ("dsb");
+}
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void)
+{
+ __ASM volatile ("dmb");
+}
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+ return __builtin_bswap32(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ return (short)__builtin_bswap16(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32 - op2));
+}
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void)
+{
+ __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/hal_tick.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,61 @@
+/**
+ ******************************************************************************
+ * @file hal_tick.h
+ * @author MCD Application Team
+ * @brief Initialization of HAL tick
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#ifndef __HAL_TICK_H
+#define __HAL_TICK_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "stm32f0xx.h"
+#include "cmsis_nvic.h"
+
+#define TIM_MST TIM1
+#define TIM_MST_UP_IRQ TIM1_BRK_UP_TRG_COM_IRQn
+#define TIM_MST_OC_IRQ TIM1_CC_IRQn
+#define TIM_MST_RCC __TIM1_CLK_ENABLE()
+
+#define TIM_MST_RESET_ON __TIM1_FORCE_RESET()
+#define TIM_MST_RESET_OFF __TIM1_RELEASE_RESET()
+
+#define HAL_TICK_DELAY (1000) // 1 ms
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __HAL_TICK_H
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f070xb.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,3420 @@
+/**
+ ******************************************************************************
+ * @file stm32f070xb.h
+ * @author MCD Application Team
+ * @version V2.2.0
+ * @date 05-December-2014
+ * @brief CMSIS STM32F070xB devices Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripherals registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f070xb
+ * @{
+ */
+
+#ifndef __STM32F070xB_H
+#define __STM32F070xB_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M0 Processor and Core Peripherals
+ */
+#define __CM0_REV 0 /*!< Core Revision r0p0 */
+#define __MPU_PRESENT 0 /*!< STM32F0xx do not provide MPU */
+#define __NVIC_PRIO_BITS 2 /*!< STM32F0xx uses 2 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F070xB device Interrupt Number Definition
+ */
+typedef enum
+{
+/****** Cortex-M0 Processor Exceptions Numbers **************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */
+
+/****** STM32F070xB specific Interrupt Numbers **************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ RTC_IRQn = 2, /*!< RTC Interrupt through EXTI Lines 17, 19 and 20 */
+ FLASH_IRQn = 3, /*!< FLASH global Interrupt */
+ RCC_IRQn = 4, /*!< RCC Global Interrupts */
+ EXTI0_1_IRQn = 5, /*!< EXTI Line 0 and 1 Interrupts */
+ EXTI2_3_IRQn = 6, /*!< EXTI Line 2 and 3 Interrupts */
+ EXTI4_15_IRQn = 7, /*!< EXTI Line 4 to 15 Interrupts */
+ DMA1_Channel1_IRQn = 9, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_3_IRQn = 10, /*!< DMA1 Channel 2 and Channel 3 Interrupts */
+ DMA1_Channel4_5_IRQn = 11, /*!< DMA1 Channel 4 and Channel 5 Interrupts */
+ ADC1_IRQn = 12, /*!< ADC1 interrupts (ADC interrupt combined with EXTI Lines 21 and 22 */
+ TIM1_BRK_UP_TRG_COM_IRQn = 13, /*!< TIM1 Break, Update, Trigger and Commutation Interrupts */
+ TIM1_CC_IRQn = 14, /*!< TIM1 Capture Compare Interrupt */
+ TIM3_IRQn = 16, /*!< TIM3 global Interrupt */
+ TIM6_IRQn = 17, /*!< TIM6 global Interrupts */
+ TIM7_IRQn = 18, /*!< TIM7 global Interrupt */
+ TIM14_IRQn = 19, /*!< TIM14 global Interrupt */
+ TIM15_IRQn = 20, /*!< TIM15 global Interrupt */
+ TIM16_IRQn = 21, /*!< TIM16 global Interrupt */
+ TIM17_IRQn = 22, /*!< TIM17 global Interrupt */
+ I2C1_IRQn = 23, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ I2C2_IRQn = 24, /*!< I2C2 Event Interrupt */
+ SPI1_IRQn = 25, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 26, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 27, /*!< USART1 global Interrupt */
+ USART2_IRQn = 28, /*!< USART2 global Interrupt */
+ USART3_4_IRQn = 29, /*!< USART3 and USART4 global Interrupts */
+ USB_IRQn = 31 /*!< USB global Interrupts & EXTI Line18 Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm0.h" /* Cortex-M0 processor and core peripherals */
+#include "system_stm32f0xx.h" /* STM32F0xx System Header */
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC Interrupt and Status register, Address offset:0x00 */
+ __IO uint32_t IER; /*!< ADC Interrupt Enable register, Address offset:0x04 */
+ __IO uint32_t CR; /*!< ADC Control register, Address offset:0x08 */
+ __IO uint32_t CFGR1; /*!< ADC Configuration register 1, Address offset:0x0C */
+ __IO uint32_t CFGR2; /*!< ADC Configuration register 2, Address offset:0x10 */
+ __IO uint32_t SMPR; /*!< ADC Sampling time register, Address offset:0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t TR; /*!< ADC watchdog threshold register, Address offset:0x20 */
+ uint32_t RESERVED3; /*!< Reserved, 0x24 */
+ __IO uint32_t CHSELR; /*!< ADC channel selection register, Address offset:0x28 */
+ uint32_t RESERVED4[5]; /*!< Reserved, 0x2C */
+ __IO uint32_t DR; /*!< ADC data register, Address offset:0x40 */
+}ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CCR;
+}ADC_Common_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t RESERVED3; /*!< Reserved, 0x14 */
+}CRC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+}DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
+}DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!<EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!<EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!<EXTI Rising trigger selection register , Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!<EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!<EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!<EXTI Pending register, Address offset: 0x14 */
+}EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+typedef struct
+{
+ __IO uint32_t ACR; /*!<FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!<FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!<FLASH OPT key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!<FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!<FLASH control register, Address offset: 0x10 */
+ __IO uint32_t AR; /*!<FLASH address register, Address offset: 0x14 */
+ __IO uint32_t RESERVED; /*!< Reserved, 0x18 */
+ __IO uint32_t OBR; /*!<FLASH option bytes register, Address offset: 0x1C */
+ __IO uint32_t WRPR; /*!<FLASH option bytes register, Address offset: 0x20 */
+}FLASH_TypeDef;
+
+
+/**
+ * @brief Option Bytes Registers
+ */
+typedef struct
+{
+ __IO uint16_t RDP; /*!< FLASH option byte Read protection, Address offset: 0x00 */
+ __IO uint16_t USER; /*!< FLASH option byte user options, Address offset: 0x02 */
+ __IO uint16_t DATA0; /*!< User data byte 0 (stored in FLASH_OBR[23:16]), Address offset: 0x04 */
+ __IO uint16_t DATA1; /*!< User data byte 1 (stored in FLASH_OBR[31:24]), Address offset: 0x06 */
+ __IO uint16_t WRP0; /*!< FLASH option byte write protection 0, Address offset: 0x08 */
+ __IO uint16_t WRP1; /*!< FLASH option byte write protection 1, Address offset: 0x0A */
+ __IO uint16_t WRP2; /*!< FLASH option byte write protection 2, Address offset: 0x0C */
+ __IO uint16_t WRP3; /*!< FLASH option byte write protection 3, Address offset: 0x0E */
+}OB_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x1A */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function low register, Address offset: 0x20-0x24 */
+ __IO uint32_t BRR; /*!< GPIO bit reset register, Address offset: 0x28 */
+}GPIO_TypeDef;
+
+/**
+ * @brief SysTem Configuration
+ */
+
+typedef struct
+{
+ __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */
+ uint32_t RESERVED; /*!< Reserved, 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration register, Address offset: 0x14-0x08 */
+ __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */
+}SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */
+ __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */
+ __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */
+ __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */
+ __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */
+ __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */
+ __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */
+ __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */
+}I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+ __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */
+}IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+}PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x04 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x08 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x0C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHBENR; /*!< RCC AHB peripheral clock register, Address offset: 0x14 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x18 */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x1C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x20 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x24 */
+ __IO uint32_t AHBRSTR; /*!< RCC AHB peripheral reset register, Address offset: 0x28 */
+ __IO uint32_t CFGR2; /*!< RCC clock configuration register 2, Address offset: 0x2C */
+ __IO uint32_t CFGR3; /*!< RCC clock configuration register 3, Address offset: 0x30 */
+ __IO uint32_t CR2; /*!< RCC clock control register 2, Address offset: 0x34 */
+}RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */
+}RTC_TypeDef;
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t RESERVED1;/*!< Reserved, Address offset: 0x20 */
+}SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer register, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+}TIM_TypeDef;
+
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */
+ __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */
+ __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */
+ __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */
+ __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */
+ __IO uint16_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */
+ uint16_t RESERVED1; /*!< Reserved, 0x26 */
+ __IO uint16_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */
+ uint16_t RESERVED2; /*!< Reserved, 0x2A */
+}USART_TypeDef;
+
+/**
+ * @brief Universal Serial Bus Full Speed Device
+ */
+
+typedef struct
+{
+ __IO uint16_t EP0R; /*!< USB Endpoint 0 register, Address offset: 0x00 */
+ __IO uint16_t RESERVED0; /*!< Reserved */
+ __IO uint16_t EP1R; /*!< USB Endpoint 1 register, Address offset: 0x04 */
+ __IO uint16_t RESERVED1; /*!< Reserved */
+ __IO uint16_t EP2R; /*!< USB Endpoint 2 register, Address offset: 0x08 */
+ __IO uint16_t RESERVED2; /*!< Reserved */
+ __IO uint16_t EP3R; /*!< USB Endpoint 3 register, Address offset: 0x0C */
+ __IO uint16_t RESERVED3; /*!< Reserved */
+ __IO uint16_t EP4R; /*!< USB Endpoint 4 register, Address offset: 0x10 */
+ __IO uint16_t RESERVED4; /*!< Reserved */
+ __IO uint16_t EP5R; /*!< USB Endpoint 5 register, Address offset: 0x14 */
+ __IO uint16_t RESERVED5; /*!< Reserved */
+ __IO uint16_t EP6R; /*!< USB Endpoint 6 register, Address offset: 0x18 */
+ __IO uint16_t RESERVED6; /*!< Reserved */
+ __IO uint16_t EP7R; /*!< USB Endpoint 7 register, Address offset: 0x1C */
+ __IO uint16_t RESERVED7[17]; /*!< Reserved */
+ __IO uint16_t CNTR; /*!< Control register, Address offset: 0x40 */
+ __IO uint16_t RESERVED8; /*!< Reserved */
+ __IO uint16_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */
+ __IO uint16_t RESERVED9; /*!< Reserved */
+ __IO uint16_t FNR; /*!< Frame number register, Address offset: 0x48 */
+ __IO uint16_t RESERVEDA; /*!< Reserved */
+ __IO uint16_t DADDR; /*!< Device address register, Address offset: 0x4C */
+ __IO uint16_t RESERVEDB; /*!< Reserved */
+ __IO uint16_t BTABLE; /*!< Buffer Table address register, Address offset: 0x50 */
+ __IO uint16_t RESERVEDC; /*!< Reserved */
+ __IO uint16_t LPMCSR; /*!< LPM Control and Status register, Address offset: 0x54 */
+ __IO uint16_t RESERVEDD; /*!< Reserved */
+ __IO uint16_t BCDR; /*!< Battery Charging detector register, Address offset: 0x58 */
+ __IO uint16_t RESERVEDE; /*!< Reserved */
+}USB_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+}WWDG_TypeDef;
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */
+#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+
+/*!< Peripheral memory map */
+#define APBPERIPH_BASE PERIPH_BASE
+#define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000)
+
+#define TIM3_BASE (APBPERIPH_BASE + 0x00000400)
+#define TIM6_BASE (APBPERIPH_BASE + 0x00001000)
+#define TIM7_BASE (APBPERIPH_BASE + 0x00001400)
+#define TIM14_BASE (APBPERIPH_BASE + 0x00002000)
+#define RTC_BASE (APBPERIPH_BASE + 0x00002800)
+#define WWDG_BASE (APBPERIPH_BASE + 0x00002C00)
+#define IWDG_BASE (APBPERIPH_BASE + 0x00003000)
+#define SPI2_BASE (APBPERIPH_BASE + 0x00003800)
+#define USART2_BASE (APBPERIPH_BASE + 0x00004400)
+#define USART3_BASE (APBPERIPH_BASE + 0x00004800)
+#define USART4_BASE (APBPERIPH_BASE + 0x00004C00)
+#define I2C1_BASE (APBPERIPH_BASE + 0x00005400)
+#define I2C2_BASE (APBPERIPH_BASE + 0x00005800)
+#define USB_BASE (APBPERIPH_BASE + 0x00005C00) /*!< USB_IP Peripheral Registers base address */
+#define USB_PMAADDR (APBPERIPH_BASE + 0x00006000) /*!< USB_IP Packet Memory Area base address */
+#define PWR_BASE (APBPERIPH_BASE + 0x00007000)
+#define SYSCFG_BASE (APBPERIPH_BASE + 0x00010000)
+#define EXTI_BASE (APBPERIPH_BASE + 0x00010400)
+#define ADC1_BASE (APBPERIPH_BASE + 0x00012400)
+#define ADC_BASE (APBPERIPH_BASE + 0x00012708)
+#define TIM1_BASE (APBPERIPH_BASE + 0x00012C00)
+#define SPI1_BASE (APBPERIPH_BASE + 0x00013000)
+#define USART1_BASE (APBPERIPH_BASE + 0x00013800)
+#define TIM15_BASE (APBPERIPH_BASE + 0x00014000)
+#define TIM16_BASE (APBPERIPH_BASE + 0x00014400)
+#define TIM17_BASE (APBPERIPH_BASE + 0x00014800)
+#define DBGMCU_BASE (APBPERIPH_BASE + 0x00015800)
+
+#define DMA1_BASE (AHBPERIPH_BASE + 0x00000000)
+#define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008)
+#define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001C)
+#define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030)
+#define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044)
+#define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058)
+
+#define RCC_BASE (AHBPERIPH_BASE + 0x00001000)
+#define FLASH_R_BASE (AHBPERIPH_BASE + 0x00002000) /*!< FLASH registers base address */
+#define OB_BASE ((uint32_t)0x1FFFF800) /*!< FLASH Option Bytes base address */
+#define CRC_BASE (AHBPERIPH_BASE + 0x00003000)
+
+#define GPIOA_BASE (AHB2PERIPH_BASE + 0x00000000)
+#define GPIOB_BASE (AHB2PERIPH_BASE + 0x00000400)
+#define GPIOC_BASE (AHB2PERIPH_BASE + 0x00000800)
+#define GPIOD_BASE (AHB2PERIPH_BASE + 0x00000C00)
+#define GPIOF_BASE (AHB2PERIPH_BASE + 0x00001400)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7 ((TIM_TypeDef *) TIM7_BASE)
+#define TIM14 ((TIM_TypeDef *) TIM14_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define USART3 ((USART_TypeDef *) USART3_BASE)
+#define USART4 ((USART_TypeDef *) USART4_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define TIM15 ((TIM_TypeDef *) TIM15_BASE)
+#define TIM16 ((TIM_TypeDef *) TIM16_BASE)
+#define TIM17 ((TIM_TypeDef *) TIM17_BASE)
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
+#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
+#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
+#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
+#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define OB ((OB_TypeDef *) OB_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+#define USB ((USB_TypeDef *) USB_BASE)
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers Bits Definition */
+/******************************************************************************/
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter (ADC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for ADC_ISR register ******************/
+#define ADC_ISR_AWD ((uint32_t)0x00000080) /*!< Analog watchdog flag */
+#define ADC_ISR_OVR ((uint32_t)0x00000010) /*!< Overrun flag */
+#define ADC_ISR_EOSEQ ((uint32_t)0x00000008) /*!< End of Sequence flag */
+#define ADC_ISR_EOC ((uint32_t)0x00000004) /*!< End of Conversion */
+#define ADC_ISR_EOSMP ((uint32_t)0x00000002) /*!< End of sampling flag */
+#define ADC_ISR_ADRDY ((uint32_t)0x00000001) /*!< ADC Ready */
+
+/* Old EOSEQ bit definition, maintained for legacy purpose */
+#define ADC_ISR_EOS ADC_ISR_EOSEQ
+
+/******************** Bits definition for ADC_IER register ******************/
+#define ADC_IER_AWDIE ((uint32_t)0x00000080) /*!< Analog Watchdog interrupt enable */
+#define ADC_IER_OVRIE ((uint32_t)0x00000010) /*!< Overrun interrupt enable */
+#define ADC_IER_EOSEQIE ((uint32_t)0x00000008) /*!< End of Sequence of conversion interrupt enable */
+#define ADC_IER_EOCIE ((uint32_t)0x00000004) /*!< End of Conversion interrupt enable */
+#define ADC_IER_EOSMPIE ((uint32_t)0x00000002) /*!< End of sampling interrupt enable */
+#define ADC_IER_ADRDYIE ((uint32_t)0x00000001) /*!< ADC Ready interrupt enable */
+
+/* Old EOSEQIE bit definition, maintained for legacy purpose */
+#define ADC_IER_EOSIE ADC_IER_EOSEQIE
+
+/******************** Bits definition for ADC_CR register *******************/
+#define ADC_CR_ADCAL ((uint32_t)0x80000000) /*!< ADC calibration */
+#define ADC_CR_ADSTP ((uint32_t)0x00000010) /*!< ADC stop of conversion command */
+#define ADC_CR_ADSTART ((uint32_t)0x00000004) /*!< ADC start of conversion */
+#define ADC_CR_ADDIS ((uint32_t)0x00000002) /*!< ADC disable command */
+#define ADC_CR_ADEN ((uint32_t)0x00000001) /*!< ADC enable control */
+
+/******************* Bits definition for ADC_CFGR1 register *****************/
+#define ADC_CFGR1_AWDCH ((uint32_t)0x7C000000) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */
+#define ADC_CFGR1_AWDCH_0 ((uint32_t)0x04000000) /*!< Bit 0 */
+#define ADC_CFGR1_AWDCH_1 ((uint32_t)0x08000000) /*!< Bit 1 */
+#define ADC_CFGR1_AWDCH_2 ((uint32_t)0x10000000) /*!< Bit 2 */
+#define ADC_CFGR1_AWDCH_3 ((uint32_t)0x20000000) /*!< Bit 3 */
+#define ADC_CFGR1_AWDCH_4 ((uint32_t)0x40000000) /*!< Bit 4 */
+#define ADC_CFGR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */
+#define ADC_CFGR1_AWDSGL ((uint32_t)0x00400000) /*!< Enable the watchdog on a single channel or on all channels */
+#define ADC_CFGR1_DISCEN ((uint32_t)0x00010000) /*!< Discontinuous mode on regular channels */
+#define ADC_CFGR1_AUTOFF ((uint32_t)0x00008000) /*!< ADC auto power off */
+#define ADC_CFGR1_WAIT ((uint32_t)0x00004000) /*!< ADC wait conversion mode */
+#define ADC_CFGR1_CONT ((uint32_t)0x00002000) /*!< Continuous Conversion */
+#define ADC_CFGR1_OVRMOD ((uint32_t)0x00001000) /*!< Overrun mode */
+#define ADC_CFGR1_EXTEN ((uint32_t)0x00000C00) /*!< EXTEN[1:0] bits (External Trigger Conversion mode for regular channels) */
+#define ADC_CFGR1_EXTEN_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define ADC_CFGR1_EXTEN_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL ((uint32_t)0x000001C0) /*!< EXTSEL[2:0] bits (External Event Select for regular group) */
+#define ADC_CFGR1_EXTSEL_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define ADC_CFGR1_EXTSEL_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+#define ADC_CFGR1_EXTSEL_2 ((uint32_t)0x00000100) /*!< Bit 2 */
+#define ADC_CFGR1_ALIGN ((uint32_t)0x00000020) /*!< Data Alignment */
+#define ADC_CFGR1_RES ((uint32_t)0x00000018) /*!< RES[1:0] bits (Resolution) */
+#define ADC_CFGR1_RES_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define ADC_CFGR1_RES_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define ADC_CFGR1_SCANDIR ((uint32_t)0x00000004) /*!< Sequence scan direction */
+#define ADC_CFGR1_DMACFG ((uint32_t)0x00000002) /*!< Direct memory access configuration */
+#define ADC_CFGR1_DMAEN ((uint32_t)0x00000001) /*!< Direct memory access enable */
+
+/* Old WAIT bit definition, maintained for legacy purpose */
+#define ADC_CFGR1_AUTDLY ADC_CFGR1_WAIT
+
+/******************* Bits definition for ADC_CFGR2 register *****************/
+#define ADC_CFGR2_CKMODE ((uint32_t)0xC0000000) /*!< ADC clock mode */
+#define ADC_CFGR2_CKMODE_1 ((uint32_t)0x80000000) /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_CKMODE_0 ((uint32_t)0x40000000) /*!< ADC clocked by PCLK div2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_CFGR2_JITOFFDIV4 ADC_CFGR2_CKMODE_1 /*!< ADC clocked by PCLK div4 */
+#define ADC_CFGR2_JITOFFDIV2 ADC_CFGR2_CKMODE_0 /*!< ADC clocked by PCLK div2 */
+
+/****************** Bit definition for ADC_SMPR register ********************/
+#define ADC_SMPR_SMP ((uint32_t)0x00000007) /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR_SMP_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SMPR_SMP_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SMPR_SMP_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_SMPR1_SMPR ADC_SMPR_SMP /*!< SMP[2:0] bits (Sampling time selection) */
+#define ADC_SMPR1_SMPR_0 ADC_SMPR_SMP_0 /*!< Bit 0 */
+#define ADC_SMPR1_SMPR_1 ADC_SMPR_SMP_1 /*!< Bit 1 */
+#define ADC_SMPR1_SMPR_2 ADC_SMPR_SMP_2 /*!< Bit 2 */
+
+/******************* Bit definition for ADC_TR register ********************/
+#define ADC_TR_HT ((uint32_t)0x0FFF0000) /*!< Analog watchdog high threshold */
+#define ADC_TR_LT ((uint32_t)0x00000FFF) /*!< Analog watchdog low threshold */
+
+/* Old bit definition, maintained for legacy purpose */
+#define ADC_HTR_HT ADC_TR_HT /*!< Analog watchdog high threshold */
+#define ADC_LTR_LT ADC_TR_LT /*!< Analog watchdog low threshold */
+
+/****************** Bit definition for ADC_CHSELR register ******************/
+#define ADC_CHSELR_CHSEL18 ((uint32_t)0x00040000) /*!< Channel 18 selection */
+#define ADC_CHSELR_CHSEL17 ((uint32_t)0x00020000) /*!< Channel 17 selection */
+#define ADC_CHSELR_CHSEL16 ((uint32_t)0x00010000) /*!< Channel 16 selection */
+#define ADC_CHSELR_CHSEL15 ((uint32_t)0x00008000) /*!< Channel 15 selection */
+#define ADC_CHSELR_CHSEL14 ((uint32_t)0x00004000) /*!< Channel 14 selection */
+#define ADC_CHSELR_CHSEL13 ((uint32_t)0x00002000) /*!< Channel 13 selection */
+#define ADC_CHSELR_CHSEL12 ((uint32_t)0x00001000) /*!< Channel 12 selection */
+#define ADC_CHSELR_CHSEL11 ((uint32_t)0x00000800) /*!< Channel 11 selection */
+#define ADC_CHSELR_CHSEL10 ((uint32_t)0x00000400) /*!< Channel 10 selection */
+#define ADC_CHSELR_CHSEL9 ((uint32_t)0x00000200) /*!< Channel 9 selection */
+#define ADC_CHSELR_CHSEL8 ((uint32_t)0x00000100) /*!< Channel 8 selection */
+#define ADC_CHSELR_CHSEL7 ((uint32_t)0x00000080) /*!< Channel 7 selection */
+#define ADC_CHSELR_CHSEL6 ((uint32_t)0x00000040) /*!< Channel 6 selection */
+#define ADC_CHSELR_CHSEL5 ((uint32_t)0x00000020) /*!< Channel 5 selection */
+#define ADC_CHSELR_CHSEL4 ((uint32_t)0x00000010) /*!< Channel 4 selection */
+#define ADC_CHSELR_CHSEL3 ((uint32_t)0x00000008) /*!< Channel 3 selection */
+#define ADC_CHSELR_CHSEL2 ((uint32_t)0x00000004) /*!< Channel 2 selection */
+#define ADC_CHSELR_CHSEL1 ((uint32_t)0x00000002) /*!< Channel 1 selection */
+#define ADC_CHSELR_CHSEL0 ((uint32_t)0x00000001) /*!< Channel 0 selection */
+
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */
+
+/******************* Bit definition for ADC_CCR register ********************/
+#define ADC_CCR_VBATEN ((uint32_t)0x01000000) /*!< Voltage battery enable */
+#define ADC_CCR_TSEN ((uint32_t)0x00800000) /*!< Tempurature sensore enable */
+#define ADC_CCR_VREFEN ((uint32_t)0x00400000) /*!< Vrefint enable */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit (CRC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint32_t)0x00000001) /*!< RESET the CRC computation unit bit */
+#define CRC_CR_REV_IN ((uint32_t)0x00000060) /*!< REV_IN Reverse Input Data bits */
+#define CRC_CR_REV_IN_0 ((uint32_t)0x00000020) /*!< REV_IN Bit 0 */
+#define CRC_CR_REV_IN_1 ((uint32_t)0x00000040) /*!< REV_IN Bit 1 */
+#define CRC_CR_REV_OUT ((uint32_t)0x00000080) /*!< REV_OUT Reverse Output Data bits */
+
+/******************* Bit definition for CRC_INIT register *******************/
+#define CRC_INIT_INIT ((uint32_t)0xFFFFFFFF) /*!< Initial CRC value bits */
+
+/******************************************************************************/
+/* */
+/* Debug MCU (DBGMCU) */
+/* */
+/******************************************************************************/
+
+/**************** Bit definition for DBGMCU_IDCODE register *****************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF) /*!< Device Identifier */
+
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000) /*!< REV_ID[15:0] bits (Revision Identifier) */
+#define DBGMCU_IDCODE_REV_ID_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define DBGMCU_IDCODE_REV_ID_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define DBGMCU_IDCODE_REV_ID_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define DBGMCU_IDCODE_REV_ID_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define DBGMCU_IDCODE_REV_ID_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define DBGMCU_IDCODE_REV_ID_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define DBGMCU_IDCODE_REV_ID_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define DBGMCU_IDCODE_REV_ID_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+#define DBGMCU_IDCODE_REV_ID_8 ((uint32_t)0x01000000) /*!< Bit 8 */
+#define DBGMCU_IDCODE_REV_ID_9 ((uint32_t)0x02000000) /*!< Bit 9 */
+#define DBGMCU_IDCODE_REV_ID_10 ((uint32_t)0x04000000) /*!< Bit 10 */
+#define DBGMCU_IDCODE_REV_ID_11 ((uint32_t)0x08000000) /*!< Bit 11 */
+#define DBGMCU_IDCODE_REV_ID_12 ((uint32_t)0x10000000) /*!< Bit 12 */
+#define DBGMCU_IDCODE_REV_ID_13 ((uint32_t)0x20000000) /*!< Bit 13 */
+#define DBGMCU_IDCODE_REV_ID_14 ((uint32_t)0x40000000) /*!< Bit 14 */
+#define DBGMCU_IDCODE_REV_ID_15 ((uint32_t)0x80000000) /*!< Bit 15 */
+
+/****************** Bit definition for DBGMCU_CR register *******************/
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002) /*!< Debug Stop Mode */
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004) /*!< Debug Standby mode */
+
+/****************** Bit definition for DBGMCU_APB1_FZ register **************/
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002) /*!< TIM3 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM6_STOP ((uint32_t)0x00000010) /*!< TIM6 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM7_STOP ((uint32_t)0x00000020) /*!< TIM7 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM14_STOP ((uint32_t)0x00000100) /*!< TIM14 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400) /*!< RTC Calendar frozen when core is halted */
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800) /*!< Debug Window Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000) /*!< Debug Independent Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000) /*!< I2C1 SMBUS timeout mode stopped when Core is halted */
+
+/****************** Bit definition for DBGMCU_APB2_FZ register **************/
+#define DBGMCU_APB2_FZ_DBG_TIM1_STOP ((uint32_t)0x00000800) /*!< TIM1 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM15_STOP ((uint32_t)0x00010000) /*!< TIM15 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM16_STOP ((uint32_t)0x00020000) /*!< TIM16 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM17_STOP ((uint32_t)0x00040000) /*!< TIM17 counter stopped when core is halted */
+
+/******************************************************************************/
+/* */
+/* DMA Controller (DMA) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for DMA_ISR register ********************/
+#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */
+#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */
+#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */
+#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */
+#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */
+#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */
+#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */
+#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */
+#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */
+#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */
+#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */
+#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */
+#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */
+#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */
+#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */
+#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */
+#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */
+#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */
+#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */
+#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */
+
+/******************* Bit definition for DMA_IFCR register *******************/
+#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */
+#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */
+#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */
+#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */
+#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */
+#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */
+#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */
+#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */
+#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */
+#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */
+#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */
+#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */
+#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */
+#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */
+#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */
+#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */
+#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */
+#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */
+#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */
+#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */
+
+/******************* Bit definition for DMA_CCR register ********************/
+#define DMA_CCR_EN ((uint32_t)0x00000001) /*!< Channel enable */
+#define DMA_CCR_TCIE ((uint32_t)0x00000002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR_HTIE ((uint32_t)0x00000004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR_TEIE ((uint32_t)0x00000008) /*!< Transfer error interrupt enable */
+#define DMA_CCR_DIR ((uint32_t)0x00000010) /*!< Data transfer direction */
+#define DMA_CCR_CIRC ((uint32_t)0x00000020) /*!< Circular mode */
+#define DMA_CCR_PINC ((uint32_t)0x00000040) /*!< Peripheral increment mode */
+#define DMA_CCR_MINC ((uint32_t)0x00000080) /*!< Memory increment mode */
+
+#define DMA_CCR_PSIZE ((uint32_t)0x00000300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR_PSIZE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DMA_CCR_PSIZE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+#define DMA_CCR_MSIZE ((uint32_t)0x00000C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR_MSIZE_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define DMA_CCR_MSIZE_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+
+#define DMA_CCR_PL ((uint32_t)0x00003000) /*!< PL[1:0] bits(Channel Priority level)*/
+#define DMA_CCR_PL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define DMA_CCR_PL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+
+#define DMA_CCR_MEM2MEM ((uint32_t)0x00004000) /*!< Memory to memory mode */
+
+/****************** Bit definition for DMA_CNDTR register *******************/
+#define DMA_CNDTR_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CPAR register ********************/
+#define DMA_CPAR_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CMAR register ********************/
+#define DMA_CMAR_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller (EXTI) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR register *******************/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR18 ((uint32_t)0x00040000) /*!< Interrupt Mask on line 18 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR20 ((uint32_t)0x00100000) /*!< Interrupt Mask on line 20 */
+#define EXTI_IMR_MR23 ((uint32_t)0x00800000) /*!< Interrupt Mask on line 23 */
+
+/****************** Bit definition for EXTI_EMR register ********************/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR18 ((uint32_t)0x00040000) /*!< Event Mask on line 18 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR20 ((uint32_t)0x00100000) /*!< Event Mask on line 20 */
+#define EXTI_EMR_MR23 ((uint32_t)0x00800000) /*!< Event Mask on line 23 */
+
+/******************* Bit definition for EXTI_RTSR register ******************/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+#define EXTI_RTSR_TR20 ((uint32_t)0x00100000) /*!< Rising trigger event configuration bit of line 20 */
+#define EXTI_RTSR_TR21 ((uint32_t)0x00200000) /*!< Rising trigger event configuration bit of line 21 */
+#define EXTI_RTSR_TR22 ((uint32_t)0x00400000) /*!< Rising trigger event configuration bit of line 22 */
+
+/******************* Bit definition for EXTI_FTSR register *******************/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+#define EXTI_FTSR_TR20 ((uint32_t)0x00100000) /*!< Falling trigger event configuration bit of line 20 */
+#define EXTI_FTSR_TR21 ((uint32_t)0x00200000) /*!< Falling trigger event configuration bit of line 21 */
+#define EXTI_FTSR_TR22 ((uint32_t)0x00400000) /*!< Falling trigger event configuration bit of line 22 */
+
+/******************* Bit definition for EXTI_SWIER register *******************/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+#define EXTI_SWIER_SWIER20 ((uint32_t)0x00100000) /*!< Software Interrupt on line 20 */
+#define EXTI_SWIER_SWIER21 ((uint32_t)0x00200000) /*!< Software Interrupt on line 21 */
+#define EXTI_SWIER_SWIER22 ((uint32_t)0x00400000) /*!< Software Interrupt on line 22 */
+
+/****************** Bit definition for EXTI_PR register *********************/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit 17 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit 19 */
+#define EXTI_PR_PR20 ((uint32_t)0x00100000) /*!< Pending bit 20 */
+#define EXTI_PR_PR21 ((uint32_t)0x00200000) /*!< Pending bit 21 */
+#define EXTI_PR_PR22 ((uint32_t)0x00400000) /*!< Pending bit 22 */
+
+/******************************************************************************/
+/* */
+/* FLASH and Option Bytes Registers */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for FLASH_ACR register ******************/
+#define FLASH_ACR_LATENCY ((uint32_t)0x00000001) /*!< LATENCY bit (Latency) */
+
+#define FLASH_ACR_PRFTBE ((uint32_t)0x00000010) /*!< Prefetch Buffer Enable */
+#define FLASH_ACR_PRFTBS ((uint32_t)0x00000020) /*!< Prefetch Buffer Status */
+
+/****************** Bit definition for FLASH_KEYR register ******************/
+#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /*!< FPEC Key */
+
+/***************** Bit definition for FLASH_OPTKEYR register ****************/
+#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option Byte Key */
+
+/****************** FLASH Keys **********************************************/
+#define FLASH_FKEY1 ((uint32_t)0x45670123) /*!< Flash program erase key1 */
+#define FLASH_FKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash program erase key2: used with FLASH_PEKEY1
+ to unlock the write access to the FPEC. */
+
+#define FLASH_OPTKEY1 ((uint32_t)0x45670123) /*!< Flash option key1 */
+#define FLASH_OPTKEY2 ((uint32_t)0xCDEF89AB) /*!< Flash option key2: used with FLASH_OPTKEY1 to
+ unlock the write access to the option byte block */
+
+/****************** Bit definition for FLASH_SR register *******************/
+#define FLASH_SR_BSY ((uint32_t)0x00000001) /*!< Busy */
+#define FLASH_SR_PGERR ((uint32_t)0x00000004) /*!< Programming Error */
+#define FLASH_SR_WRPRTERR ((uint32_t)0x00000010) /*!< Write Protection Error */
+#define FLASH_SR_EOP ((uint32_t)0x00000020) /*!< End of operation */
+#define FLASH_SR_WRPERR FLASH_SR_WRPRTERR /*!< Legacy of Write Protection Error */
+
+/******************* Bit definition for FLASH_CR register *******************/
+#define FLASH_CR_PG ((uint32_t)0x00000001) /*!< Programming */
+#define FLASH_CR_PER ((uint32_t)0x00000002) /*!< Page Erase */
+#define FLASH_CR_MER ((uint32_t)0x00000004) /*!< Mass Erase */
+#define FLASH_CR_OPTPG ((uint32_t)0x00000010) /*!< Option Byte Programming */
+#define FLASH_CR_OPTER ((uint32_t)0x00000020) /*!< Option Byte Erase */
+#define FLASH_CR_STRT ((uint32_t)0x00000040) /*!< Start */
+#define FLASH_CR_LOCK ((uint32_t)0x00000080) /*!< Lock */
+#define FLASH_CR_OPTWRE ((uint32_t)0x00000200) /*!< Option Bytes Write Enable */
+#define FLASH_CR_ERRIE ((uint32_t)0x00000400) /*!< Error Interrupt Enable */
+#define FLASH_CR_EOPIE ((uint32_t)0x00001000) /*!< End of operation interrupt enable */
+#define FLASH_CR_OBL_LAUNCH ((uint32_t)0x00002000) /*!< Option Bytes Loader Launch */
+
+/******************* Bit definition for FLASH_AR register *******************/
+#define FLASH_AR_FAR ((uint32_t)0xFFFFFFFF) /*!< Flash Address */
+
+/****************** Bit definition for FLASH_OBR register *******************/
+#define FLASH_OBR_OPTERR ((uint32_t)0x00000001) /*!< Option Byte Error */
+#define FLASH_OBR_RDPRT1 ((uint32_t)0x00000002) /*!< Read protection Level 1 */
+#define FLASH_OBR_RDPRT2 ((uint32_t)0x00000004) /*!< Read protection Level 2 */
+
+#define FLASH_OBR_USER ((uint32_t)0x00003700) /*!< User Option Bytes */
+#define FLASH_OBR_IWDG_SW ((uint32_t)0x00000100) /*!< IWDG SW */
+#define FLASH_OBR_nRST_STOP ((uint32_t)0x00000200) /*!< nRST_STOP */
+#define FLASH_OBR_nRST_STDBY ((uint32_t)0x00000400) /*!< nRST_STDBY */
+#define FLASH_OBR_nBOOT1 ((uint32_t)0x00001000) /*!< nBOOT1 */
+#define FLASH_OBR_VDDA_MONITOR ((uint32_t)0x00002000) /*!< VDDA power supply supervisor */
+
+/* Old BOOT1 bit definition, maintained for legacy purpose */
+#define FLASH_OBR_BOOT1 FLASH_OBR_nBOOT1
+
+/* Old OBR_VDDA bit definition, maintained for legacy purpose */
+#define FLASH_OBR_VDDA_ANALOG FLASH_OBR_VDDA_MONITOR
+
+/****************** Bit definition for FLASH_WRPR register ******************/
+#define FLASH_WRPR_WRP ((uint32_t)0x0000FFFF) /*!< Write Protect */
+
+/*----------------------------------------------------------------------------*/
+
+/****************** Bit definition for OB_RDP register **********************/
+#define OB_RDP_RDP ((uint32_t)0x000000FF) /*!< Read protection option byte */
+#define OB_RDP_nRDP ((uint32_t)0x0000FF00) /*!< Read protection complemented option byte */
+
+/****************** Bit definition for OB_USER register *********************/
+#define OB_USER_USER ((uint32_t)0x00FF0000) /*!< User option byte */
+#define OB_USER_nUSER ((uint32_t)0xFF000000) /*!< User complemented option byte */
+
+/****************** Bit definition for OB_WRP0 register *********************/
+#define OB_WRP0_WRP0 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP0_nWRP0 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP1 register *********************/
+#define OB_WRP1_WRP1 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP1_nWRP1 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP2 register *********************/
+#define OB_WRP2_WRP2 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP2_nWRP2 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for OB_WRP3 register *********************/
+#define OB_WRP3_WRP3 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP3_nWRP3 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/******************************************************************************/
+/* */
+/* General Purpose IOs (GPIO) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
+#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
+#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
+#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
+#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
+#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
+#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
+#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
+#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
+#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
+#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
+#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
+#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
+#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
+#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
+#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_OTYPER register *****************/
+#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
+
+/**************** Bit definition for GPIO_OSPEEDR register ******************/
+#define GPIO_OSPEEDR_OSPEEDR0 ((uint32_t)0x00000003)
+#define GPIO_OSPEEDR_OSPEEDR0_0 ((uint32_t)0x00000001)
+#define GPIO_OSPEEDR_OSPEEDR0_1 ((uint32_t)0x00000002)
+#define GPIO_OSPEEDR_OSPEEDR1 ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDR_OSPEEDR1_0 ((uint32_t)0x00000004)
+#define GPIO_OSPEEDR_OSPEEDR1_1 ((uint32_t)0x00000008)
+#define GPIO_OSPEEDR_OSPEEDR2 ((uint32_t)0x00000030)
+#define GPIO_OSPEEDR_OSPEEDR2_0 ((uint32_t)0x00000010)
+#define GPIO_OSPEEDR_OSPEEDR2_1 ((uint32_t)0x00000020)
+#define GPIO_OSPEEDR_OSPEEDR3 ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDR_OSPEEDR3_0 ((uint32_t)0x00000040)
+#define GPIO_OSPEEDR_OSPEEDR3_1 ((uint32_t)0x00000080)
+#define GPIO_OSPEEDR_OSPEEDR4 ((uint32_t)0x00000300)
+#define GPIO_OSPEEDR_OSPEEDR4_0 ((uint32_t)0x00000100)
+#define GPIO_OSPEEDR_OSPEEDR4_1 ((uint32_t)0x00000200)
+#define GPIO_OSPEEDR_OSPEEDR5 ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDR_OSPEEDR5_0 ((uint32_t)0x00000400)
+#define GPIO_OSPEEDR_OSPEEDR5_1 ((uint32_t)0x00000800)
+#define GPIO_OSPEEDR_OSPEEDR6 ((uint32_t)0x00003000)
+#define GPIO_OSPEEDR_OSPEEDR6_0 ((uint32_t)0x00001000)
+#define GPIO_OSPEEDR_OSPEEDR6_1 ((uint32_t)0x00002000)
+#define GPIO_OSPEEDR_OSPEEDR7 ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDR_OSPEEDR7_0 ((uint32_t)0x00004000)
+#define GPIO_OSPEEDR_OSPEEDR7_1 ((uint32_t)0x00008000)
+#define GPIO_OSPEEDR_OSPEEDR8 ((uint32_t)0x00030000)
+#define GPIO_OSPEEDR_OSPEEDR8_0 ((uint32_t)0x00010000)
+#define GPIO_OSPEEDR_OSPEEDR8_1 ((uint32_t)0x00020000)
+#define GPIO_OSPEEDR_OSPEEDR9 ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDR_OSPEEDR9_0 ((uint32_t)0x00040000)
+#define GPIO_OSPEEDR_OSPEEDR9_1 ((uint32_t)0x00080000)
+#define GPIO_OSPEEDR_OSPEEDR10 ((uint32_t)0x00300000)
+#define GPIO_OSPEEDR_OSPEEDR10_0 ((uint32_t)0x00100000)
+#define GPIO_OSPEEDR_OSPEEDR10_1 ((uint32_t)0x00200000)
+#define GPIO_OSPEEDR_OSPEEDR11 ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDR_OSPEEDR11_0 ((uint32_t)0x00400000)
+#define GPIO_OSPEEDR_OSPEEDR11_1 ((uint32_t)0x00800000)
+#define GPIO_OSPEEDR_OSPEEDR12 ((uint32_t)0x03000000)
+#define GPIO_OSPEEDR_OSPEEDR12_0 ((uint32_t)0x01000000)
+#define GPIO_OSPEEDR_OSPEEDR12_1 ((uint32_t)0x02000000)
+#define GPIO_OSPEEDR_OSPEEDR13 ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDR_OSPEEDR13_0 ((uint32_t)0x04000000)
+#define GPIO_OSPEEDR_OSPEEDR13_1 ((uint32_t)0x08000000)
+#define GPIO_OSPEEDR_OSPEEDR14 ((uint32_t)0x30000000)
+#define GPIO_OSPEEDR_OSPEEDR14_0 ((uint32_t)0x10000000)
+#define GPIO_OSPEEDR_OSPEEDR14_1 ((uint32_t)0x20000000)
+#define GPIO_OSPEEDR_OSPEEDR15 ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDR_OSPEEDR15_0 ((uint32_t)0x40000000)
+#define GPIO_OSPEEDR_OSPEEDR15_1 ((uint32_t)0x80000000)
+
+/* Old Bit definition for GPIO_OSPEEDR register maintained for legacy purpose */
+#define GPIO_OSPEEDER_OSPEEDR0 GPIO_OSPEEDR_OSPEEDR0
+#define GPIO_OSPEEDER_OSPEEDR0_0 GPIO_OSPEEDR_OSPEEDR0_0
+#define GPIO_OSPEEDER_OSPEEDR0_1 GPIO_OSPEEDR_OSPEEDR0_1
+#define GPIO_OSPEEDER_OSPEEDR1 GPIO_OSPEEDR_OSPEEDR1
+#define GPIO_OSPEEDER_OSPEEDR1_0 GPIO_OSPEEDR_OSPEEDR1_0
+#define GPIO_OSPEEDER_OSPEEDR1_1 GPIO_OSPEEDR_OSPEEDR1_1
+#define GPIO_OSPEEDER_OSPEEDR2 GPIO_OSPEEDR_OSPEEDR2
+#define GPIO_OSPEEDER_OSPEEDR2_0 GPIO_OSPEEDR_OSPEEDR2_0
+#define GPIO_OSPEEDER_OSPEEDR2_1 GPIO_OSPEEDR_OSPEEDR2_1
+#define GPIO_OSPEEDER_OSPEEDR3 GPIO_OSPEEDR_OSPEEDR3
+#define GPIO_OSPEEDER_OSPEEDR3_0 GPIO_OSPEEDR_OSPEEDR3_0
+#define GPIO_OSPEEDER_OSPEEDR3_1 GPIO_OSPEEDR_OSPEEDR3_1
+#define GPIO_OSPEEDER_OSPEEDR4 GPIO_OSPEEDR_OSPEEDR4
+#define GPIO_OSPEEDER_OSPEEDR4_0 GPIO_OSPEEDR_OSPEEDR4_0
+#define GPIO_OSPEEDER_OSPEEDR4_1 GPIO_OSPEEDR_OSPEEDR4_1
+#define GPIO_OSPEEDER_OSPEEDR5 GPIO_OSPEEDR_OSPEEDR5
+#define GPIO_OSPEEDER_OSPEEDR5_0 GPIO_OSPEEDR_OSPEEDR5_0
+#define GPIO_OSPEEDER_OSPEEDR5_1 GPIO_OSPEEDR_OSPEEDR5_1
+#define GPIO_OSPEEDER_OSPEEDR6 GPIO_OSPEEDR_OSPEEDR6
+#define GPIO_OSPEEDER_OSPEEDR6_0 GPIO_OSPEEDR_OSPEEDR6_0
+#define GPIO_OSPEEDER_OSPEEDR6_1 GPIO_OSPEEDR_OSPEEDR6_1
+#define GPIO_OSPEEDER_OSPEEDR7 GPIO_OSPEEDR_OSPEEDR7
+#define GPIO_OSPEEDER_OSPEEDR7_0 GPIO_OSPEEDR_OSPEEDR7_0
+#define GPIO_OSPEEDER_OSPEEDR7_1 GPIO_OSPEEDR_OSPEEDR7_1
+#define GPIO_OSPEEDER_OSPEEDR8 GPIO_OSPEEDR_OSPEEDR8
+#define GPIO_OSPEEDER_OSPEEDR8_0 GPIO_OSPEEDR_OSPEEDR8_0
+#define GPIO_OSPEEDER_OSPEEDR8_1 GPIO_OSPEEDR_OSPEEDR8_1
+#define GPIO_OSPEEDER_OSPEEDR9 GPIO_OSPEEDR_OSPEEDR9
+#define GPIO_OSPEEDER_OSPEEDR9_0 GPIO_OSPEEDR_OSPEEDR9_0
+#define GPIO_OSPEEDER_OSPEEDR9_1 GPIO_OSPEEDR_OSPEEDR9_1
+#define GPIO_OSPEEDER_OSPEEDR10 GPIO_OSPEEDR_OSPEEDR10
+#define GPIO_OSPEEDER_OSPEEDR10_0 GPIO_OSPEEDR_OSPEEDR10_0
+#define GPIO_OSPEEDER_OSPEEDR10_1 GPIO_OSPEEDR_OSPEEDR10_1
+#define GPIO_OSPEEDER_OSPEEDR11 GPIO_OSPEEDR_OSPEEDR11
+#define GPIO_OSPEEDER_OSPEEDR11_0 GPIO_OSPEEDR_OSPEEDR11_0
+#define GPIO_OSPEEDER_OSPEEDR11_1 GPIO_OSPEEDR_OSPEEDR11_1
+#define GPIO_OSPEEDER_OSPEEDR12 GPIO_OSPEEDR_OSPEEDR12
+#define GPIO_OSPEEDER_OSPEEDR12_0 GPIO_OSPEEDR_OSPEEDR12_0
+#define GPIO_OSPEEDER_OSPEEDR12_1 GPIO_OSPEEDR_OSPEEDR12_1
+#define GPIO_OSPEEDER_OSPEEDR13 GPIO_OSPEEDR_OSPEEDR13
+#define GPIO_OSPEEDER_OSPEEDR13_0 GPIO_OSPEEDR_OSPEEDR13_0
+#define GPIO_OSPEEDER_OSPEEDR13_1 GPIO_OSPEEDR_OSPEEDR13_1
+#define GPIO_OSPEEDER_OSPEEDR14 GPIO_OSPEEDR_OSPEEDR14
+#define GPIO_OSPEEDER_OSPEEDR14_0 GPIO_OSPEEDR_OSPEEDR14_0
+#define GPIO_OSPEEDER_OSPEEDR14_1 GPIO_OSPEEDR_OSPEEDR14_1
+#define GPIO_OSPEEDER_OSPEEDR15 GPIO_OSPEEDR_OSPEEDR15
+#define GPIO_OSPEEDER_OSPEEDR15_0 GPIO_OSPEEDR_OSPEEDR15_0
+#define GPIO_OSPEEDER_OSPEEDR15_1 GPIO_OSPEEDR_OSPEEDR15_1
+
+/******************* Bit definition for GPIO_PUPDR register ******************/
+#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
+#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
+#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
+#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
+#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
+#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
+#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
+#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
+#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
+#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
+#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
+#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
+#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
+#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
+#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
+#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
+
+/******************* Bit definition for GPIO_IDR register *******************/
+#define GPIO_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_IDR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_ODR register ********************/
+#define GPIO_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_ODR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_BSRR register ********************/
+#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register ********************/
+#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK ((uint32_t)0x00010000)
+
+/****************** Bit definition for GPIO_AFRL register ********************/
+#define GPIO_AFRL_AFRL0 ((uint32_t)0x0000000F)
+#define GPIO_AFRL_AFRL1 ((uint32_t)0x000000F0)
+#define GPIO_AFRL_AFRL2 ((uint32_t)0x00000F00)
+#define GPIO_AFRL_AFRL3 ((uint32_t)0x0000F000)
+#define GPIO_AFRL_AFRL4 ((uint32_t)0x000F0000)
+#define GPIO_AFRL_AFRL5 ((uint32_t)0x00F00000)
+#define GPIO_AFRL_AFRL6 ((uint32_t)0x0F000000)
+#define GPIO_AFRL_AFRL7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_AFRH register ********************/
+#define GPIO_AFRH_AFRH0 ((uint32_t)0x0000000F)
+#define GPIO_AFRH_AFRH1 ((uint32_t)0x000000F0)
+#define GPIO_AFRH_AFRH2 ((uint32_t)0x00000F00)
+#define GPIO_AFRH_AFRH3 ((uint32_t)0x0000F000)
+#define GPIO_AFRH_AFRH4 ((uint32_t)0x000F0000)
+#define GPIO_AFRH_AFRH5 ((uint32_t)0x00F00000)
+#define GPIO_AFRH_AFRH6 ((uint32_t)0x0F000000)
+#define GPIO_AFRH_AFRH7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_BRR register *********************/
+#define GPIO_BRR_BR_0 ((uint32_t)0x00000001)
+#define GPIO_BRR_BR_1 ((uint32_t)0x00000002)
+#define GPIO_BRR_BR_2 ((uint32_t)0x00000004)
+#define GPIO_BRR_BR_3 ((uint32_t)0x00000008)
+#define GPIO_BRR_BR_4 ((uint32_t)0x00000010)
+#define GPIO_BRR_BR_5 ((uint32_t)0x00000020)
+#define GPIO_BRR_BR_6 ((uint32_t)0x00000040)
+#define GPIO_BRR_BR_7 ((uint32_t)0x00000080)
+#define GPIO_BRR_BR_8 ((uint32_t)0x00000100)
+#define GPIO_BRR_BR_9 ((uint32_t)0x00000200)
+#define GPIO_BRR_BR_10 ((uint32_t)0x00000400)
+#define GPIO_BRR_BR_11 ((uint32_t)0x00000800)
+#define GPIO_BRR_BR_12 ((uint32_t)0x00001000)
+#define GPIO_BRR_BR_13 ((uint32_t)0x00002000)
+#define GPIO_BRR_BR_14 ((uint32_t)0x00004000)
+#define GPIO_BRR_BR_15 ((uint32_t)0x00008000)
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface (I2C) */
+/* */
+/******************************************************************************/
+
+/******************* Bit definition for I2C_CR1 register *******************/
+#define I2C_CR1_PE ((uint32_t)0x00000001) /*!< Peripheral enable */
+#define I2C_CR1_TXIE ((uint32_t)0x00000002) /*!< TX interrupt enable */
+#define I2C_CR1_RXIE ((uint32_t)0x00000004) /*!< RX interrupt enable */
+#define I2C_CR1_ADDRIE ((uint32_t)0x00000008) /*!< Address match interrupt enable */
+#define I2C_CR1_NACKIE ((uint32_t)0x00000010) /*!< NACK received interrupt enable */
+#define I2C_CR1_STOPIE ((uint32_t)0x00000020) /*!< STOP detection interrupt enable */
+#define I2C_CR1_TCIE ((uint32_t)0x00000040) /*!< Transfer complete interrupt enable */
+#define I2C_CR1_ERRIE ((uint32_t)0x00000080) /*!< Errors interrupt enable */
+#define I2C_CR1_DFN ((uint32_t)0x00000F00) /*!< Digital noise filter */
+#define I2C_CR1_ANFOFF ((uint32_t)0x00001000) /*!< Analog noise filter OFF */
+#define I2C_CR1_SWRST ((uint32_t)0x00002000) /*!< Software reset */
+#define I2C_CR1_TXDMAEN ((uint32_t)0x00004000) /*!< DMA transmission requests enable */
+#define I2C_CR1_RXDMAEN ((uint32_t)0x00008000) /*!< DMA reception requests enable */
+#define I2C_CR1_SBC ((uint32_t)0x00010000) /*!< Slave byte control */
+#define I2C_CR1_NOSTRETCH ((uint32_t)0x00020000) /*!< Clock stretching disable */
+#define I2C_CR1_GCEN ((uint32_t)0x00080000) /*!< General call enable */
+#define I2C_CR1_SMBHEN ((uint32_t)0x00100000) /*!< SMBus host address enable */
+#define I2C_CR1_SMBDEN ((uint32_t)0x00200000) /*!< SMBus device default address enable */
+#define I2C_CR1_ALERTEN ((uint32_t)0x00400000) /*!< SMBus alert enable */
+#define I2C_CR1_PECEN ((uint32_t)0x00800000) /*!< PEC enable */
+
+/****************** Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_SADD ((uint32_t)0x000003FF) /*!< Slave address (master mode) */
+#define I2C_CR2_RD_WRN ((uint32_t)0x00000400) /*!< Transfer direction (master mode) */
+#define I2C_CR2_ADD10 ((uint32_t)0x00000800) /*!< 10-bit addressing mode (master mode) */
+#define I2C_CR2_HEAD10R ((uint32_t)0x00001000) /*!< 10-bit address header only read direction (master mode) */
+#define I2C_CR2_START ((uint32_t)0x00002000) /*!< START generation */
+#define I2C_CR2_STOP ((uint32_t)0x00004000) /*!< STOP generation (master mode) */
+#define I2C_CR2_NACK ((uint32_t)0x00008000) /*!< NACK generation (slave mode) */
+#define I2C_CR2_NBYTES ((uint32_t)0x00FF0000) /*!< Number of bytes */
+#define I2C_CR2_RELOAD ((uint32_t)0x01000000) /*!< NBYTES reload mode */
+#define I2C_CR2_AUTOEND ((uint32_t)0x02000000) /*!< Automatic end mode (master mode) */
+#define I2C_CR2_PECBYTE ((uint32_t)0x04000000) /*!< Packet error checking byte */
+
+/******************* Bit definition for I2C_OAR1 register ******************/
+#define I2C_OAR1_OA1 ((uint32_t)0x000003FF) /*!< Interface own address 1 */
+#define I2C_OAR1_OA1MODE ((uint32_t)0x00000400) /*!< Own address 1 10-bit mode */
+#define I2C_OAR1_OA1EN ((uint32_t)0x00008000) /*!< Own address 1 enable */
+
+/******************* Bit definition for I2C_OAR2 register ******************/
+#define I2C_OAR2_OA2 ((uint32_t)0x000000FE) /*!< Interface own address 2 */
+#define I2C_OAR2_OA2MSK ((uint32_t)0x00000700) /*!< Own address 2 masks */
+#define I2C_OAR2_OA2EN ((uint32_t)0x00008000) /*!< Own address 2 enable */
+
+/******************* Bit definition for I2C_TIMINGR register ****************/
+#define I2C_TIMINGR_SCLL ((uint32_t)0x000000FF) /*!< SCL low period (master mode) */
+#define I2C_TIMINGR_SCLH ((uint32_t)0x0000FF00) /*!< SCL high period (master mode) */
+#define I2C_TIMINGR_SDADEL ((uint32_t)0x000F0000) /*!< Data hold time */
+#define I2C_TIMINGR_SCLDEL ((uint32_t)0x00F00000) /*!< Data setup time */
+#define I2C_TIMINGR_PRESC ((uint32_t)0xF0000000) /*!< Timings prescaler */
+
+/******************* Bit definition for I2C_TIMEOUTR register ****************/
+#define I2C_TIMEOUTR_TIMEOUTA ((uint32_t)0x00000FFF) /*!< Bus timeout A */
+#define I2C_TIMEOUTR_TIDLE ((uint32_t)0x00001000) /*!< Idle clock timeout detection */
+#define I2C_TIMEOUTR_TIMOUTEN ((uint32_t)0x00008000) /*!< Clock timeout enable */
+#define I2C_TIMEOUTR_TIMEOUTB ((uint32_t)0x0FFF0000) /*!< Bus timeout B*/
+#define I2C_TIMEOUTR_TEXTEN ((uint32_t)0x80000000) /*!< Extended clock timeout enable */
+
+/****************** Bit definition for I2C_ISR register ********************/
+#define I2C_ISR_TXE ((uint32_t)0x00000001) /*!< Transmit data register empty */
+#define I2C_ISR_TXIS ((uint32_t)0x00000002) /*!< Transmit interrupt status */
+#define I2C_ISR_RXNE ((uint32_t)0x00000004) /*!< Receive data register not empty */
+#define I2C_ISR_ADDR ((uint32_t)0x00000008) /*!< Address matched (slave mode)*/
+#define I2C_ISR_NACKF ((uint32_t)0x00000010) /*!< NACK received flag */
+#define I2C_ISR_STOPF ((uint32_t)0x00000020) /*!< STOP detection flag */
+#define I2C_ISR_TC ((uint32_t)0x00000040) /*!< Transfer complete (master mode) */
+#define I2C_ISR_TCR ((uint32_t)0x00000080) /*!< Transfer complete reload */
+#define I2C_ISR_BERR ((uint32_t)0x00000100) /*!< Bus error */
+#define I2C_ISR_ARLO ((uint32_t)0x00000200) /*!< Arbitration lost */
+#define I2C_ISR_OVR ((uint32_t)0x00000400) /*!< Overrun/Underrun */
+#define I2C_ISR_PECERR ((uint32_t)0x00000800) /*!< PEC error in reception */
+#define I2C_ISR_TIMEOUT ((uint32_t)0x00001000) /*!< Timeout or Tlow detection flag */
+#define I2C_ISR_ALERT ((uint32_t)0x00002000) /*!< SMBus alert */
+#define I2C_ISR_BUSY ((uint32_t)0x00008000) /*!< Bus busy */
+#define I2C_ISR_DIR ((uint32_t)0x00010000) /*!< Transfer direction (slave mode) */
+#define I2C_ISR_ADDCODE ((uint32_t)0x00FE0000) /*!< Address match code (slave mode) */
+
+/****************** Bit definition for I2C_ICR register ********************/
+#define I2C_ICR_ADDRCF ((uint32_t)0x00000008) /*!< Address matched clear flag */
+#define I2C_ICR_NACKCF ((uint32_t)0x00000010) /*!< NACK clear flag */
+#define I2C_ICR_STOPCF ((uint32_t)0x00000020) /*!< STOP detection clear flag */
+#define I2C_ICR_BERRCF ((uint32_t)0x00000100) /*!< Bus error clear flag */
+#define I2C_ICR_ARLOCF ((uint32_t)0x00000200) /*!< Arbitration lost clear flag */
+#define I2C_ICR_OVRCF ((uint32_t)0x00000400) /*!< Overrun/Underrun clear flag */
+#define I2C_ICR_PECCF ((uint32_t)0x00000800) /*!< PAC error clear flag */
+#define I2C_ICR_TIMOUTCF ((uint32_t)0x00001000) /*!< Timeout clear flag */
+#define I2C_ICR_ALERTCF ((uint32_t)0x00002000) /*!< Alert clear flag */
+
+/****************** Bit definition for I2C_PECR register *******************/
+#define I2C_PECR_PEC ((uint32_t)0x000000FF) /*!< PEC register */
+
+/****************** Bit definition for I2C_RXDR register *********************/
+#define I2C_RXDR_RXDATA ((uint32_t)0x000000FF) /*!< 8-bit receive data */
+
+/****************** Bit definition for I2C_TXDR register *******************/
+#define I2C_TXDR_TXDATA ((uint32_t)0x000000FF) /*!< 8-bit transmit data */
+
+/*****************************************************************************/
+/* */
+/* Independent WATCHDOG (IWDG) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_KR_KEY ((uint32_t)0xFFFF) /*!< Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register *******************/
+#define IWDG_PR_PR ((uint32_t)0x07) /*!< PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint32_t)0x01) /*!< Bit 0 */
+#define IWDG_PR_PR_1 ((uint32_t)0x02) /*!< Bit 1 */
+#define IWDG_PR_PR_2 ((uint32_t)0x04) /*!< Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register ******************/
+#define IWDG_RLR_RL ((uint32_t)0x0FFF) /*!< Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register *******************/
+#define IWDG_SR_PVU ((uint32_t)0x01) /*!< Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint32_t)0x02) /*!< Watchdog counter reload value update */
+#define IWDG_SR_WVU ((uint32_t)0x04) /*!< Watchdog counter window value update */
+
+/******************* Bit definition for IWDG_KR register *******************/
+#define IWDG_WINR_WIN ((uint32_t)0x0FFF) /*!< Watchdog counter window value */
+
+/*****************************************************************************/
+/* */
+/* Power Control (PWR) */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for PWR_CR register *******************/
+#define PWR_CR_LPDS ((uint32_t)0x00000001) /*!< Low-power Deepsleep */
+#define PWR_CR_PDDS ((uint32_t)0x00000002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint32_t)0x00000004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint32_t)0x00000008) /*!< Clear Standby Flag */
+#define PWR_CR_DBP ((uint32_t)0x00000100) /*!< Disable Backup Domain write protection */
+
+/******************* Bit definition for PWR_CSR register *******************/
+#define PWR_CSR_WUF ((uint32_t)0x00000001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint32_t)0x00000002) /*!< Standby Flag */
+
+#define PWR_CSR_EWUP1 ((uint32_t)0x00000100) /*!< Enable WKUP pin 1 */
+#define PWR_CSR_EWUP2 ((uint32_t)0x00000200) /*!< Enable WKUP pin 2 */
+#define PWR_CSR_EWUP4 ((uint32_t)0x00000800) /*!< Enable WKUP pin 4 */
+#define PWR_CSR_EWUP5 ((uint32_t)0x00001000) /*!< Enable WKUP pin 5 */
+#define PWR_CSR_EWUP6 ((uint32_t)0x00002000) /*!< Enable WKUP pin 6 */
+#define PWR_CSR_EWUP7 ((uint32_t)0x00004000) /*!< Enable WKUP pin 7 */
+
+/*****************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/*****************************************************************************/
+
+/******************** Bit definition for RCC_CR register *******************/
+#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */
+
+#define RCC_CR_HSITRIM ((uint32_t)0x000000F8) /*!< Internal High Speed clock trimming */
+#define RCC_CR_HSITRIM_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 ((uint32_t)0x00000020) /*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 ((uint32_t)0x00000040) /*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 ((uint32_t)0x00000080) /*!<Bit 4 */
+
+#define RCC_CR_HSICAL ((uint32_t)0x0000FF00) /*!< Internal High Speed clock Calibration */
+#define RCC_CR_HSICAL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define RCC_CR_HSICAL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define RCC_CR_HSICAL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define RCC_CR_HSICAL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define RCC_CR_HSICAL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define RCC_CR_HSICAL_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define RCC_CR_HSICAL_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define RCC_CR_HSICAL_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */
+#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */
+#define RCC_CR_CSSON ((uint32_t)0x00080000) /*!< Clock Security System enable */
+#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */
+
+/******************** Bit definition for RCC_CFGR register *****************/
+/*!< SW configuration */
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+/*!< PPRE configuration */
+#define RCC_CFGR_PPRE ((uint32_t)0x00000700) /*!< PRE[2:0] bits (APB prescaler) */
+#define RCC_CFGR_PPRE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_CFGR_PPRE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define RCC_CFGR_PPRE_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */
+
+/*!< ADCPPRE configuration */
+#define RCC_CFGR_ADCPRE ((uint32_t)0x00004000) /*!< ADCPRE bit (ADC prescaler) */
+
+#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000) /*!< PCLK divided by 2 */
+#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000) /*!< PCLK divided by 4 */
+
+#define RCC_CFGR_PLLSRC ((uint32_t)0x00018000) /*!< PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_DIV2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_PREDIV ((uint32_t)0x00008000) /*!< HSI/PREDIV clock selected as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSE_PREDIV ((uint32_t)0x00010000) /*!< HSE/PREDIV clock selected as PLL entry clock source */
+
+#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< HSE/PREDIV clock not divided for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV2 ((uint32_t)0x00020000) /*!< HSE/PREDIV clock divided by 2 for PLL entry */
+
+/*!< PLLMUL configuration */
+#define RCC_CFGR_PLLMUL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */
+#define RCC_CFGR_PLLMUL_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define RCC_CFGR_PLLMUL_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define RCC_CFGR_PLLMUL_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+#define RCC_CFGR_PLLMUL_3 ((uint32_t)0x00200000) /*!< Bit 3 */
+
+#define RCC_CFGR_PLLMUL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */
+#define RCC_CFGR_PLLMUL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */
+#define RCC_CFGR_PLLMUL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */
+#define RCC_CFGR_PLLMUL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */
+#define RCC_CFGR_PLLMUL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */
+#define RCC_CFGR_PLLMUL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */
+#define RCC_CFGR_PLLMUL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */
+#define RCC_CFGR_PLLMUL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */
+#define RCC_CFGR_PLLMUL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */
+#define RCC_CFGR_PLLMUL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */
+#define RCC_CFGR_PLLMUL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */
+#define RCC_CFGR_PLLMUL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */
+#define RCC_CFGR_PLLMUL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */
+#define RCC_CFGR_PLLMUL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */
+#define RCC_CFGR_PLLMUL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */
+
+/*!< USB configuration */
+#define RCC_CFGR_USBPRE ((uint32_t)0x00400000) /*!< USB prescaler */
+
+/*!< MCO configuration */
+#define RCC_CFGR_MCO ((uint32_t)0x0F000000) /*!< MCO[3:0] bits (Microcontroller Clock Output) */
+#define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define RCC_CFGR_MCO_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_CFGR_MCO_HSI14 ((uint32_t)0x01000000) /*!< HSI14 clock selected as MCO source */
+#define RCC_CFGR_MCO_LSI ((uint32_t)0x02000000) /*!< LSI clock selected as MCO source */
+#define RCC_CFGR_MCO_LSE ((uint32_t)0x03000000) /*!< LSE clock selected as MCO source */
+#define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */
+#define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */
+#define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */
+#define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */
+
+#define RCC_CFGR_MCOPRE ((uint32_t)0x70000000) /*!< MCO prescaler */
+#define RCC_CFGR_MCOPRE_DIV1 ((uint32_t)0x00000000) /*!< MCO is divided by 1 */
+#define RCC_CFGR_MCOPRE_DIV2 ((uint32_t)0x10000000) /*!< MCO is divided by 2 */
+#define RCC_CFGR_MCOPRE_DIV4 ((uint32_t)0x20000000) /*!< MCO is divided by 4 */
+#define RCC_CFGR_MCOPRE_DIV8 ((uint32_t)0x30000000) /*!< MCO is divided by 8 */
+#define RCC_CFGR_MCOPRE_DIV16 ((uint32_t)0x40000000) /*!< MCO is divided by 16 */
+#define RCC_CFGR_MCOPRE_DIV32 ((uint32_t)0x50000000) /*!< MCO is divided by 32 */
+#define RCC_CFGR_MCOPRE_DIV64 ((uint32_t)0x60000000) /*!< MCO is divided by 64 */
+#define RCC_CFGR_MCOPRE_DIV128 ((uint32_t)0x70000000) /*!< MCO is divided by 128 */
+
+#define RCC_CFGR_PLLNODIV ((uint32_t)0x80000000) /*!< PLL is not divided to MCO */
+
+/*!<****************** Bit definition for RCC_CIR register *****************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */
+#define RCC_CIR_HSI14RDYF ((uint32_t)0x00000020) /*!< HSI14 Ready Interrupt flag */
+#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */
+#define RCC_CIR_HSI14RDYIE ((uint32_t)0x00002000) /*!< HSI14 Ready Interrupt Enable */
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */
+#define RCC_CIR_HSI14RDYC ((uint32_t)0x00200000) /*!< HSI14 Ready Interrupt Clear */
+#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */
+
+/***************** Bit definition for RCC_APB2RSTR register ****************/
+#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00000001) /*!< SYSCFG clock reset */
+#define RCC_APB2RSTR_ADCRST ((uint32_t)0x00000200) /*!< ADC clock reset */
+#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000800) /*!< TIM1 clock reset */
+#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI1 clock reset */
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 clock reset */
+#define RCC_APB2RSTR_TIM15RST ((uint32_t)0x00010000) /*!< TIM15 clock reset */
+#define RCC_APB2RSTR_TIM16RST ((uint32_t)0x00020000) /*!< TIM16 clock reset */
+#define RCC_APB2RSTR_TIM17RST ((uint32_t)0x00040000) /*!< TIM17 clock reset */
+#define RCC_APB2RSTR_DBGMCURST ((uint32_t)0x00400000) /*!< DBGMCU clock reset */
+
+/*!< Old ADC1 clock reset bit definition maintained for legacy purpose */
+#define RCC_APB2RSTR_ADC1RST RCC_APB2RSTR_ADCRST
+
+/***************** Bit definition for RCC_APB1RSTR register ****************/
+#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 clock reset */
+#define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 clock reset */
+#define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 clock reset */
+#define RCC_APB1RSTR_TIM14RST ((uint32_t)0x00000100) /*!< Timer 14 clock reset */
+#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog clock reset */
+#define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI2 clock reset */
+#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 clock reset */
+#define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< USART 3 clock reset */
+#define RCC_APB1RSTR_USART4RST ((uint32_t)0x00080000) /*!< USART 4 clock reset */
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 clock reset */
+#define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 clock reset */
+#define RCC_APB1RSTR_USBRST ((uint32_t)0x00800000) /*!< USB clock reset */
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< PWR clock reset */
+
+/****************** Bit definition for RCC_AHBENR register *****************/
+#define RCC_AHBENR_DMAEN ((uint32_t)0x00000001) /*!< DMA1 clock enable */
+#define RCC_AHBENR_SRAMEN ((uint32_t)0x00000004) /*!< SRAM interface clock enable */
+#define RCC_AHBENR_FLITFEN ((uint32_t)0x00000010) /*!< FLITF clock enable */
+#define RCC_AHBENR_CRCEN ((uint32_t)0x00000040) /*!< CRC clock enable */
+#define RCC_AHBENR_GPIOAEN ((uint32_t)0x00020000) /*!< GPIOA clock enable */
+#define RCC_AHBENR_GPIOBEN ((uint32_t)0x00040000) /*!< GPIOB clock enable */
+#define RCC_AHBENR_GPIOCEN ((uint32_t)0x00080000) /*!< GPIOC clock enable */
+#define RCC_AHBENR_GPIODEN ((uint32_t)0x00100000) /*!< GPIOD clock enable */
+#define RCC_AHBENR_GPIOFEN ((uint32_t)0x00400000) /*!< GPIOF clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_AHBENR_DMA1EN RCC_AHBENR_DMAEN /*!< DMA1 clock enable */
+
+/***************** Bit definition for RCC_APB2ENR register *****************/
+#define RCC_APB2ENR_SYSCFGCOMPEN ((uint32_t)0x00000001) /*!< SYSCFG and comparator clock enable */
+#define RCC_APB2ENR_ADCEN ((uint32_t)0x00000200) /*!< ADC1 clock enable */
+#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000800) /*!< TIM1 clock enable */
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI1 clock enable */
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */
+#define RCC_APB2ENR_TIM15EN ((uint32_t)0x00010000) /*!< TIM15 clock enable */
+#define RCC_APB2ENR_TIM16EN ((uint32_t)0x00020000) /*!< TIM16 clock enable */
+#define RCC_APB2ENR_TIM17EN ((uint32_t)0x00040000) /*!< TIM17 clock enable */
+#define RCC_APB2ENR_DBGMCUEN ((uint32_t)0x00400000) /*!< DBGMCU clock enable */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_APB2ENR_SYSCFGEN RCC_APB2ENR_SYSCFGCOMPEN /*!< SYSCFG clock enable */
+#define RCC_APB2ENR_ADC1EN RCC_APB2ENR_ADCEN /*!< ADC1 clock enable */
+
+/***************** Bit definition for RCC_APB1ENR register *****************/
+#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */
+#define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */
+#define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */
+#define RCC_APB1ENR_TIM14EN ((uint32_t)0x00000100) /*!< Timer 14 clock enable */
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */
+#define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI2 clock enable */
+#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART2 clock enable */
+#define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000) /*!< USART3 clock enable */
+#define RCC_APB1ENR_USART4EN ((uint32_t)0x00080000) /*!< USART4 clock enable */
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C1 clock enable */
+#define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C2 clock enable */
+#define RCC_APB1ENR_USBEN ((uint32_t)0x00800000) /*!< USB clock enable */
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< PWR clock enable */
+
+/******************* Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */
+#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */
+#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */
+
+#define RCC_BDCR_LSEDRV ((uint32_t)0x00000018) /*!< LSEDRV[1:0] bits (LSE Osc. drive capability) */
+#define RCC_BDCR_LSEDRV_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define RCC_BDCR_LSEDRV_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+
+#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */
+#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+/*!< RTC configuration */
+#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */
+
+#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */
+#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */
+
+/******************* Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */
+#define RCC_CSR_V18PWRRSTF ((uint32_t)0x00800000) /*!< V1.8 power domain reset flag */
+#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */
+#define RCC_CSR_OBLRSTF ((uint32_t)0x02000000) /*!< OBL reset flag */
+#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */
+#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */
+
+/* Old Bit definition maintained for legacy purpose */
+#define RCC_CSR_OBL RCC_CSR_OBLRSTF /*!< OBL reset flag */
+
+/******************* Bit definition for RCC_AHBRSTR register ***************/
+#define RCC_AHBRSTR_GPIOARST ((uint32_t)0x00020000) /*!< GPIOA clock reset */
+#define RCC_AHBRSTR_GPIOBRST ((uint32_t)0x00040000) /*!< GPIOB clock reset */
+#define RCC_AHBRSTR_GPIOCRST ((uint32_t)0x00080000) /*!< GPIOC clock reset */
+#define RCC_AHBRSTR_GPIODRST ((uint32_t)0x00100000) /*!< GPIOD clock reset */
+#define RCC_AHBRSTR_GPIOFRST ((uint32_t)0x00400000) /*!< GPIOF clock reset */
+
+/******************* Bit definition for RCC_CFGR2 register *****************/
+/*!< PREDIV configuration */
+#define RCC_CFGR2_PREDIV ((uint32_t)0x0000000F) /*!< PREDIV[3:0] bits */
+#define RCC_CFGR2_PREDIV_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR2_PREDIV_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RCC_CFGR2_PREDIV_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RCC_CFGR2_PREDIV_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define RCC_CFGR2_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< PREDIV input clock not divided */
+#define RCC_CFGR2_PREDIV_DIV2 ((uint32_t)0x00000001) /*!< PREDIV input clock divided by 2 */
+#define RCC_CFGR2_PREDIV_DIV3 ((uint32_t)0x00000002) /*!< PREDIV input clock divided by 3 */
+#define RCC_CFGR2_PREDIV_DIV4 ((uint32_t)0x00000003) /*!< PREDIV input clock divided by 4 */
+#define RCC_CFGR2_PREDIV_DIV5 ((uint32_t)0x00000004) /*!< PREDIV input clock divided by 5 */
+#define RCC_CFGR2_PREDIV_DIV6 ((uint32_t)0x00000005) /*!< PREDIV input clock divided by 6 */
+#define RCC_CFGR2_PREDIV_DIV7 ((uint32_t)0x00000006) /*!< PREDIV input clock divided by 7 */
+#define RCC_CFGR2_PREDIV_DIV8 ((uint32_t)0x00000007) /*!< PREDIV input clock divided by 8 */
+#define RCC_CFGR2_PREDIV_DIV9 ((uint32_t)0x00000008) /*!< PREDIV input clock divided by 9 */
+#define RCC_CFGR2_PREDIV_DIV10 ((uint32_t)0x00000009) /*!< PREDIV input clock divided by 10 */
+#define RCC_CFGR2_PREDIV_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV input clock divided by 11 */
+#define RCC_CFGR2_PREDIV_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV input clock divided by 12 */
+#define RCC_CFGR2_PREDIV_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV input clock divided by 13 */
+#define RCC_CFGR2_PREDIV_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV input clock divided by 14 */
+#define RCC_CFGR2_PREDIV_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV input clock divided by 15 */
+#define RCC_CFGR2_PREDIV_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV input clock divided by 16 */
+
+/******************* Bit definition for RCC_CFGR3 register *****************/
+/*!< USART1 Clock source selection */
+#define RCC_CFGR3_USART1SW ((uint32_t)0x00000003) /*!< USART1SW[1:0] bits */
+#define RCC_CFGR3_USART1SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR3_USART1SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART1SW_PCLK ((uint32_t)0x00000000) /*!< PCLK clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_SYSCLK ((uint32_t)0x00000001) /*!< System clock selected as USART1 clock source */
+#define RCC_CFGR3_USART1SW_LSE ((uint32_t)0x00000002) /*!< LSE oscillator clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_HSI ((uint32_t)0x00000003) /*!< HSI oscillator clock used as USART1 clock source */
+
+/*!< I2C1 Clock source selection */
+#define RCC_CFGR3_I2C1SW ((uint32_t)0x00000010) /*!< I2C1SW bits */
+
+#define RCC_CFGR3_I2C1SW_HSI ((uint32_t)0x00000000) /*!< HSI oscillator clock used as I2C1 clock source */
+#define RCC_CFGR3_I2C1SW_SYSCLK ((uint32_t)0x00000010) /*!< System clock selected as I2C1 clock source */
+
+/*!< USB Clock source selection */
+#define RCC_CFGR3_USBSW ((uint32_t)0x00000080) /*!< USBSW bits */
+
+#define RCC_CFGR3_USBSW_PLLCLK ((uint32_t)0x00000080) /*!< PLLCLK selected as USB clock source */
+
+/******************* Bit definition for RCC_CR2 register *******************/
+#define RCC_CR2_HSI14ON ((uint32_t)0x00000001) /*!< Internal High Speed 14MHz clock enable */
+#define RCC_CR2_HSI14RDY ((uint32_t)0x00000002) /*!< Internal High Speed 14MHz clock ready flag */
+#define RCC_CR2_HSI14DIS ((uint32_t)0x00000004) /*!< Internal High Speed 14MHz clock disable */
+#define RCC_CR2_HSI14TRIM ((uint32_t)0x000000F8) /*!< Internal High Speed 14MHz clock trimming */
+#define RCC_CR2_HSI14CAL ((uint32_t)0x0000FF00) /*!< Internal High Speed 14MHz clock Calibration */
+
+/*****************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/*****************************************************************************/
+/******************** Bits definition for RTC_TR register ******************/
+#define RTC_TR_PM ((uint32_t)0x00400000)
+#define RTC_TR_HT ((uint32_t)0x00300000)
+#define RTC_TR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TR_HU ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TR_MNT ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TR_MNU ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TR_ST ((uint32_t)0x00000070)
+#define RTC_TR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TR_SU ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_DR register ******************/
+#define RTC_DR_YT ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0 ((uint32_t)0x00100000)
+#define RTC_DR_YT_1 ((uint32_t)0x00200000)
+#define RTC_DR_YT_2 ((uint32_t)0x00400000)
+#define RTC_DR_YT_3 ((uint32_t)0x00800000)
+#define RTC_DR_YU ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0 ((uint32_t)0x00010000)
+#define RTC_DR_YU_1 ((uint32_t)0x00020000)
+#define RTC_DR_YU_2 ((uint32_t)0x00040000)
+#define RTC_DR_YU_3 ((uint32_t)0x00080000)
+#define RTC_DR_WDU ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_DR_MT ((uint32_t)0x00001000)
+#define RTC_DR_MU ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0 ((uint32_t)0x00000100)
+#define RTC_DR_MU_1 ((uint32_t)0x00000200)
+#define RTC_DR_MU_2 ((uint32_t)0x00000400)
+#define RTC_DR_MU_3 ((uint32_t)0x00000800)
+#define RTC_DR_DT ((uint32_t)0x00000030)
+#define RTC_DR_DT_0 ((uint32_t)0x00000010)
+#define RTC_DR_DT_1 ((uint32_t)0x00000020)
+#define RTC_DR_DU ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0 ((uint32_t)0x00000001)
+#define RTC_DR_DU_1 ((uint32_t)0x00000002)
+#define RTC_DR_DU_2 ((uint32_t)0x00000004)
+#define RTC_DR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_CR register ******************/
+#define RTC_CR_COE ((uint32_t)0x00800000)
+#define RTC_CR_OSEL ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
+#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_COSEL ((uint32_t)0x00080000)
+#define RTC_CR_BCK ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H ((uint32_t)0x00010000)
+#define RTC_CR_TSIE ((uint32_t)0x00008000)
+#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
+#define RTC_CR_TSE ((uint32_t)0x00000800)
+#define RTC_CR_ALRAE ((uint32_t)0x00000100)
+#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_ISR register *****************/
+#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP2F ((uint32_t)0x00004000)
+#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
+#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
+#define RTC_ISR_TSF ((uint32_t)0x00000800)
+#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
+#define RTC_ISR_INIT ((uint32_t)0x00000080)
+#define RTC_ISR_INITF ((uint32_t)0x00000040)
+#define RTC_ISR_RSF ((uint32_t)0x00000020)
+#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF ((uint32_t)0x00000008)
+#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_PRER register ****************/
+#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_ALRMAR register **************/
+#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_WPR register *****************/
+#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+
+/******************** Bits definition for RTC_SSR register *****************/
+#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_SHIFTR register **************/
+#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
+
+/******************** Bits definition for RTC_TSTR register ****************/
+#define RTC_TSTR_PM ((uint32_t)0x00400000)
+#define RTC_TSTR_HT ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TSTR_HU ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TSTR_ST ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TSTR_SU ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSDR register ****************/
+#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_TSDR_MT ((uint32_t)0x00001000)
+#define RTC_TSDR_MU ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
+#define RTC_TSDR_DT ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
+#define RTC_TSDR_DU ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSSSR register ***************/
+#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CALR register ****************/
+#define RTC_CALR_CALP ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
+#define RTC_CALR_CALM ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
+
+/******************** Bits definition for RTC_TAFCR register ***************/
+#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010)
+#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008)
+#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_ALRMASSR register ************/
+#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
+
+/*****************************************************************************/
+/* */
+/* Serial Peripheral Interface (SPI) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for SPI_CR1 register *******************/
+#define SPI_CR1_CPHA ((uint32_t)0x00000001) /*!< Clock Phase */
+#define SPI_CR1_CPOL ((uint32_t)0x00000002) /*!< Clock Polarity */
+#define SPI_CR1_MSTR ((uint32_t)0x00000004) /*!< Master Selection */
+#define SPI_CR1_BR ((uint32_t)0x00000038) /*!< BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define SPI_CR1_BR_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define SPI_CR1_BR_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+#define SPI_CR1_SPE ((uint32_t)0x00000040) /*!< SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint32_t)0x00000080) /*!< Frame Format */
+#define SPI_CR1_SSI ((uint32_t)0x00000100) /*!< Internal slave select */
+#define SPI_CR1_SSM ((uint32_t)0x00000200) /*!< Software slave management */
+#define SPI_CR1_RXONLY ((uint32_t)0x00000400) /*!< Receive only */
+#define SPI_CR1_CRCL ((uint32_t)0x00000800) /*!< CRC Length */
+#define SPI_CR1_CRCNEXT ((uint32_t)0x00001000) /*!< Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint32_t)0x00002000) /*!< Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint32_t)0x00004000) /*!< Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint32_t)0x00008000) /*!< Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register *******************/
+#define SPI_CR2_RXDMAEN ((uint32_t)0x00000001) /*!< Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint32_t)0x00000002) /*!< Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint32_t)0x00000004) /*!< SS Output Enable */
+#define SPI_CR2_NSSP ((uint32_t)0x00000008) /*!< NSS pulse management Enable */
+#define SPI_CR2_FRF ((uint32_t)0x00000010) /*!< Frame Format Enable */
+#define SPI_CR2_ERRIE ((uint32_t)0x00000020) /*!< Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint32_t)0x00000040) /*!< RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint32_t)0x00000080) /*!< Tx buffer Empty Interrupt Enable */
+#define SPI_CR2_DS ((uint32_t)0x00000F00) /*!< DS[3:0] Data Size */
+#define SPI_CR2_DS_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define SPI_CR2_DS_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define SPI_CR2_DS_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define SPI_CR2_DS_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+#define SPI_CR2_FRXTH ((uint32_t)0x00001000) /*!< FIFO reception Threshold */
+#define SPI_CR2_LDMARX ((uint32_t)0x00002000) /*!< Last DMA transfer for reception */
+#define SPI_CR2_LDMATX ((uint32_t)0x00004000) /*!< Last DMA transfer for transmission */
+
+/******************** Bit definition for SPI_SR register *******************/
+#define SPI_SR_RXNE ((uint32_t)0x00000001) /*!< Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint32_t)0x00000002) /*!< Transmit buffer Empty */
+#define SPI_SR_CRCERR ((uint32_t)0x00000010) /*!< CRC Error flag */
+#define SPI_SR_MODF ((uint32_t)0x00000020) /*!< Mode fault */
+#define SPI_SR_OVR ((uint32_t)0x00000040) /*!< Overrun flag */
+#define SPI_SR_BSY ((uint32_t)0x00000080) /*!< Busy flag */
+#define SPI_SR_FRE ((uint32_t)0x00000100) /*!< TI frame format error */
+#define SPI_SR_FRLVL ((uint32_t)0x00000600) /*!< FIFO Reception Level */
+#define SPI_SR_FRLVL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define SPI_SR_FRLVL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define SPI_SR_FTLVL ((uint32_t)0x00001800) /*!< FIFO Transmission Level */
+#define SPI_SR_FTLVL_0 ((uint32_t)0x00000800) /*!< Bit 0 */
+#define SPI_SR_FTLVL_1 ((uint32_t)0x00001000) /*!< Bit 1 */
+
+/******************** Bit definition for SPI_DR register *******************/
+#define SPI_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data Register */
+
+/******************* Bit definition for SPI_CRCPR register *****************/
+#define SPI_CRCPR_CRCPOLY ((uint32_t)0xFFFFFFFF) /*!< CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register *****************/
+#define SPI_RXCRCR_RXCRC ((uint32_t)0xFFFFFFFF) /*!< Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register *****************/
+#define SPI_TXCRCR_TXCRC ((uint32_t)0xFFFFFFFF) /*!< Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register ****************/
+#define SPI_I2SCFGR_I2SMOD ((uint32_t)0x00000800) /*!< Keep for compatibility */
+
+/*****************************************************************************/
+/* */
+/* System Configuration (SYSCFG) */
+/* */
+/*****************************************************************************/
+/***************** Bit definition for SYSCFG_CFGR1 register ****************/
+#define SYSCFG_CFGR1_MEM_MODE ((uint32_t)0x00000003) /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_CFGR1_MEM_MODE_0 ((uint32_t)0x00000001) /*!< SYSCFG_Memory Remap Config Bit 0 */
+#define SYSCFG_CFGR1_MEM_MODE_1 ((uint32_t)0x00000002) /*!< SYSCFG_Memory Remap Config Bit 1 */
+
+#define SYSCFG_CFGR1_DMA_RMP ((uint32_t)0x00001F00) /*!< DMA remap mask */
+#define SYSCFG_CFGR1_ADC_DMA_RMP ((uint32_t)0x00000100) /*!< ADC DMA remap */
+#define SYSCFG_CFGR1_USART1TX_DMA_RMP ((uint32_t)0x00000200) /*!< USART1 TX DMA remap */
+#define SYSCFG_CFGR1_USART1RX_DMA_RMP ((uint32_t)0x00000400) /*!< USART1 RX DMA remap */
+#define SYSCFG_CFGR1_TIM16_DMA_RMP ((uint32_t)0x00000800) /*!< Timer 16 DMA remap */
+#define SYSCFG_CFGR1_TIM17_DMA_RMP ((uint32_t)0x00001000) /*!< Timer 17 DMA remap */
+
+#define SYSCFG_CFGR1_I2C_FMP_PB6 ((uint32_t)0x00010000) /*!< I2C PB6 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB7 ((uint32_t)0x00020000) /*!< I2C PB7 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB8 ((uint32_t)0x00040000) /*!< I2C PB8 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_PB9 ((uint32_t)0x00080000) /*!< I2C PB9 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_FMP_I2C1 ((uint32_t)0x00100000) /*!< Enable Fast Mode Plus on PB10, PB11, PF6 and PF7 */
+#define SYSCFG_CFGR1_USART3_DMA_RMP ((uint32_t)0x04000000) /*!< USART3 DMA remap */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register **************/
+#define SYSCFG_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */
+
+/**
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */
+
+/**
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */
+
+/**
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */
+
+/**
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!< PF[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register **************/
+#define SYSCFG_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */
+
+/**
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */
+
+/**
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */
+
+/**
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */
+
+/**
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!< PF[7] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR3 register **************/
+#define SYSCFG_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */
+
+/**
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PF ((uint16_t)0x0005) /*!< PF[8] pin */
+
+/**
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */
+
+/**
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */
+
+/**
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PF ((uint16_t)0x5000) /*!< PF[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register **************/
+#define SYSCFG_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */
+
+/**
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PF ((uint16_t)0x0005) /*!< PF[12] pin */
+
+/**
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PF ((uint16_t)0x0050) /*!< PF[13] pin */
+
+/**
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PF ((uint16_t)0x0500) /*!< PF[14] pin */
+
+/**
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PF ((uint16_t)0x5000) /*!< PF[15] pin */
+
+/***************** Bit definition for SYSCFG_CFGR2 register ****************/
+#define SYSCFG_CFGR2_LOCKUP_LOCK ((uint32_t)0x00000001) /*!< Enables and locks the LOCKUP (Hardfault) output of CortexM0 with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PARITY_LOCK ((uint32_t)0x00000002) /*!< Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1 */
+#define SYSCFG_CFGR2_SRAM_PEF ((uint32_t)0x00000100) /*!< SRAM Parity error flag */
+#define SYSCFG_CFGR2_SRAM_PE SYSCFG_CFGR2_SRAM_PEF /*!< SRAM Parity error flag (define maintained for legacy purpose) */
+
+/*****************************************************************************/
+/* */
+/* Timers (TIM) */
+/* */
+/*****************************************************************************/
+/******************* Bit definition for TIM_CR1 register *******************/
+#define TIM_CR1_CEN ((uint32_t)0x00000001) /*!<Counter enable */
+#define TIM_CR1_UDIS ((uint32_t)0x00000002) /*!<Update disable */
+#define TIM_CR1_URS ((uint32_t)0x00000004) /*!<Update request source */
+#define TIM_CR1_OPM ((uint32_t)0x00000008) /*!<One pulse mode */
+#define TIM_CR1_DIR ((uint32_t)0x00000010) /*!<Direction */
+
+#define TIM_CR1_CMS ((uint32_t)0x00000060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TIM_CR1_CMS_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+
+#define TIM_CR1_ARPE ((uint32_t)0x00000080) /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint32_t)0x00000300) /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CR1_CKD_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+/******************* Bit definition for TIM_CR2 register *******************/
+#define TIM_CR2_CCPC ((uint32_t)0x00000001) /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS ((uint32_t)0x00000004) /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS ((uint32_t)0x00000008) /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint32_t)0x00000070) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CR2_MMS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CR2_MMS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CR2_TI1S ((uint32_t)0x00000080) /*!<TI1 Selection */
+#define TIM_CR2_OIS1 ((uint32_t)0x00000100) /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N ((uint32_t)0x00000200) /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 ((uint32_t)0x00000400) /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N ((uint32_t)0x00000800) /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 ((uint32_t)0x00001000) /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N ((uint32_t)0x00002000) /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 ((uint32_t)0x00004000) /*!<Output Idle state 4 (OC4 output) */
+
+/******************* Bit definition for TIM_SMCR register ******************/
+#define TIM_SMCR_SMS ((uint32_t)0x00000007) /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+
+#define TIM_SMCR_OCCS ((uint32_t)0x00000008) /*!< OCREF clear selection */
+
+#define TIM_SMCR_TS ((uint32_t)0x00000070) /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_SMCR_TS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_SMCR_TS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_SMCR_MSM ((uint32_t)0x00000080) /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint32_t)0x00000F00) /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint32_t)0x00003000) /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define TIM_SMCR_ECE ((uint32_t)0x00004000) /*!<External clock enable */
+#define TIM_SMCR_ETP ((uint32_t)0x00008000) /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register ******************/
+#define TIM_DIER_UIE ((uint32_t)0x00000001) /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE ((uint32_t)0x00000020) /*!<COM interrupt enable */
+#define TIM_DIER_TIE ((uint32_t)0x00000040) /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE ((uint32_t)0x00000080) /*!<Break interrupt enable */
+#define TIM_DIER_UDE ((uint32_t)0x00000100) /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint32_t)0x00000200) /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint32_t)0x00000400) /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint32_t)0x00000800) /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint32_t)0x00001000) /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint32_t)0x00002000) /*!<COM DMA request enable */
+#define TIM_DIER_TDE ((uint32_t)0x00004000) /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register *******************/
+#define TIM_SR_UIF ((uint32_t)0x00000001) /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF ((uint32_t)0x00000020) /*!<COM interrupt Flag */
+#define TIM_SR_TIF ((uint32_t)0x00000040) /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF ((uint32_t)0x00000080) /*!<Break interrupt Flag */
+#define TIM_SR_CC1OF ((uint32_t)0x00000200) /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint32_t)0x00000400) /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint32_t)0x00000800) /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint32_t)0x00001000) /*!<Capture/Compare 4 Overcapture Flag */
+
+/******************* Bit definition for TIM_EGR register *******************/
+#define TIM_EGR_UG ((uint32_t)0x00000001) /*!<Update Generation */
+#define TIM_EGR_CC1G ((uint32_t)0x00000002) /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint32_t)0x00000004) /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint32_t)0x00000008) /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint32_t)0x00000010) /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG ((uint32_t)0x00000020) /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG ((uint32_t)0x00000040) /*!<Trigger Generation */
+#define TIM_EGR_BG ((uint32_t)0x00000080) /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register ******************/
+#define TIM_CCMR1_CC1S ((uint32_t)0x00000003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint32_t)0x00000004) /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint32_t)0x00000008) /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint32_t)0x00000070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC1CE ((uint32_t)0x00000080) /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint32_t)0x00000300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint32_t)0x00000400) /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint32_t)0x00000800) /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint32_t)0x00007000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR1_OC2CE ((uint32_t)0x00008000) /*!<Output Compare 2 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint32_t)0x0000000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint32_t)0x000000F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint32_t)0x00000C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint32_t)0x0000F000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register ******************/
+#define TIM_CCMR2_CC3S ((uint32_t)0x00000003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint32_t)0x00000004) /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint32_t)0x00000008) /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint32_t)0x00000070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC3CE ((uint32_t)0x00000080) /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint32_t)0x00000300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint32_t)0x00000400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint32_t)0x00000800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint32_t)0x00007000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TIM_CCMR2_OC4CE ((uint32_t)0x00008000) /*!<Output Compare 4 Clear Enable */
+
+/*---------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint32_t)0x0000000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint32_t)0x000000F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint32_t)0x00000C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint32_t)0x0000F000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register ******************/
+#define TIM_CCER_CC1E ((uint32_t)0x00000001) /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint32_t)0x00000002) /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE ((uint32_t)0x00000004) /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP ((uint32_t)0x00000008) /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint32_t)0x00000010) /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint32_t)0x00000020) /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE ((uint32_t)0x00000040) /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP ((uint32_t)0x00000080) /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint32_t)0x00000100) /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint32_t)0x00000200) /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE ((uint32_t)0x00000400) /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP ((uint32_t)0x00000800) /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint32_t)0x00001000) /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint32_t)0x00002000) /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint32_t)0x00008000) /*!<Capture/Compare 4 Complementary output Polarity */
+
+/******************* Bit definition for TIM_CNT register *******************/
+#define TIM_CNT_CNT ((uint32_t)0xFFFFFFFF) /*!<Counter Value */
+
+/******************* Bit definition for TIM_PSC register *******************/
+#define TIM_PSC_PSC ((uint32_t)0x0000FFFF) /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register *******************/
+#define TIM_ARR_ARR ((uint32_t)0xFFFFFFFF) /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register *******************/
+#define TIM_RCR_REP ((uint32_t)0x000000FF) /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register ******************/
+#define TIM_CCR1_CCR1 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register ******************/
+#define TIM_CCR2_CCR2 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register ******************/
+#define TIM_CCR3_CCR3 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register ******************/
+#define TIM_CCR4_CCR4 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_BDTR register ******************/
+#define TIM_BDTR_DTG ((uint32_t)0x000000FF) /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK ((uint32_t)0x00000300) /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI ((uint32_t)0x00000400) /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR ((uint32_t)0x00000800) /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE ((uint32_t)0x00001000) /*!<Break enable */
+#define TIM_BDTR_BKP ((uint32_t)0x00002000) /*!<Break Polarity */
+#define TIM_BDTR_AOE ((uint32_t)0x00004000) /*!<Automatic Output enable */
+#define TIM_BDTR_MOE ((uint32_t)0x00008000) /*!<Main Output enable */
+
+/******************* Bit definition for TIM_DCR register *******************/
+#define TIM_DCR_DBA ((uint32_t)0x0000001F) /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_DCR_DBA_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_DCR_DBA_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_DCR_DBA_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_DCR_DBA_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+
+#define TIM_DCR_DBL ((uint32_t)0x00001F00) /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_DCR_DBL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_DCR_DBL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_DCR_DBL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define TIM_DCR_DBL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register ******************/
+#define TIM_DMAR_DMAB ((uint32_t)0x0000FFFF) /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM14_OR register ********************/
+#define TIM14_OR_TI1_RMP ((uint32_t)0x00000003) /*!<TI1_RMP[1:0] bits (TIM14 Input 4 remap) */
+#define TIM14_OR_TI1_RMP_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM14_OR_TI1_RMP_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter (USART) */
+/* */
+/******************************************************************************/
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_UE ((uint32_t)0x00000001) /*!< USART Enable */
+#define USART_CR1_RE ((uint32_t)0x00000004) /*!< Receiver Enable */
+#define USART_CR1_TE ((uint32_t)0x00000008) /*!< Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint32_t)0x00000010) /*!< IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint32_t)0x00000020) /*!< RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint32_t)0x00000040) /*!< Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint32_t)0x00000080) /*!< TXE Interrupt Enable */
+#define USART_CR1_PEIE ((uint32_t)0x00000100) /*!< PE Interrupt Enable */
+#define USART_CR1_PS ((uint32_t)0x00000200) /*!< Parity Selection */
+#define USART_CR1_PCE ((uint32_t)0x00000400) /*!< Parity Control Enable */
+#define USART_CR1_WAKE ((uint32_t)0x00000800) /*!< Receiver Wakeup method */
+#define USART_CR1_M0 ((uint32_t)0x00001000) /*!< Word length bit 0 */
+#define USART_CR1_MME ((uint32_t)0x00002000) /*!< Mute Mode Enable */
+#define USART_CR1_CMIE ((uint32_t)0x00004000) /*!< Character match interrupt enable */
+#define USART_CR1_OVER8 ((uint32_t)0x00008000) /*!< Oversampling by 8-bit or 16-bit mode */
+#define USART_CR1_DEDT ((uint32_t)0x001F0000) /*!< DEDT[4:0] bits (Driver Enable Deassertion Time) */
+#define USART_CR1_DEDT_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define USART_CR1_DEDT_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define USART_CR1_DEDT_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define USART_CR1_DEDT_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define USART_CR1_DEDT_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define USART_CR1_DEAT ((uint32_t)0x03E00000) /*!< DEAT[4:0] bits (Driver Enable Assertion Time) */
+#define USART_CR1_DEAT_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR1_DEAT_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR1_DEAT_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+#define USART_CR1_DEAT_3 ((uint32_t)0x01000000) /*!< Bit 3 */
+#define USART_CR1_DEAT_4 ((uint32_t)0x02000000) /*!< Bit 4 */
+#define USART_CR1_RTOIE ((uint32_t)0x04000000) /*!< Receive Time Out interrupt enable */
+#define USART_CR1_EOBIE ((uint32_t)0x08000000) /*!< End of Block interrupt enable */
+#define USART_CR1_M1 ((uint32_t)0x10000000) /*!< Word length bit 1 */
+#define USART_CR1_M ((uint32_t)0x10001000) /*!< [M1:M0] Word length */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADDM7 ((uint32_t)0x00000010) /*!< 7-bit or 4-bit Address Detection */
+#define USART_CR2_LBCL ((uint32_t)0x00000100) /*!< Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint32_t)0x00000200) /*!< Clock Phase */
+#define USART_CR2_CPOL ((uint32_t)0x00000400) /*!< Clock Polarity */
+#define USART_CR2_CLKEN ((uint32_t)0x00000800) /*!< Clock Enable */
+#define USART_CR2_STOP ((uint32_t)0x00003000) /*!< STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define USART_CR2_STOP_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define USART_CR2_LINEN ((uint32_t)0x00004000) /*!< Keep for compatibility */
+#define USART_CR2_SWAP ((uint32_t)0x00008000) /*!< SWAP TX/RX pins */
+#define USART_CR2_RXINV ((uint32_t)0x00010000) /*!< RX pin active level inversion */
+#define USART_CR2_TXINV ((uint32_t)0x00020000) /*!< TX pin active level inversion */
+#define USART_CR2_DATAINV ((uint32_t)0x00040000) /*!< Binary data inversion */
+#define USART_CR2_MSBFIRST ((uint32_t)0x00080000) /*!< Most Significant Bit First */
+#define USART_CR2_ABREN ((uint32_t)0x00100000) /*!< Auto Baud-Rate Enable*/
+#define USART_CR2_ABRMODE ((uint32_t)0x00600000) /*!< ABRMOD[1:0] bits (Auto Baud-Rate Mode) */
+#define USART_CR2_ABRMODE_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR2_ABRMODE_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR2_RTOEN ((uint32_t)0x00800000) /*!< Receiver Time-Out enable */
+#define USART_CR2_ADD ((uint32_t)0xFF000000) /*!< Address of the USART node */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint32_t)0x00000001) /*!< Error Interrupt Enable */
+#define USART_CR3_IREN ((uint32_t)0x00000002) /*!< Keep for compatibility */
+#define USART_CR3_HDSEL ((uint32_t)0x00000008) /*!< Half-Duplex Selection */
+#define USART_CR3_SCEN ((uint32_t)0x00000020) /*!< Keep for compatibility */
+#define USART_CR3_DMAR ((uint32_t)0x00000040) /*!< DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint32_t)0x00000080) /*!< DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint32_t)0x00000100) /*!< RTS Enable */
+#define USART_CR3_CTSE ((uint32_t)0x00000200) /*!< CTS Enable */
+#define USART_CR3_CTSIE ((uint32_t)0x00000400) /*!< CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint32_t)0x00000800) /*!< One sample bit method enable */
+#define USART_CR3_OVRDIS ((uint32_t)0x00001000) /*!< Overrun Disable */
+#define USART_CR3_DDRE ((uint32_t)0x00002000) /*!< DMA Disable on Reception Error */
+#define USART_CR3_DEM ((uint32_t)0x00004000) /*!< Driver Enable Mode */
+#define USART_CR3_DEP ((uint32_t)0x00008000) /*!< Driver Enable Polarity Selection */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_FRACTION ((uint32_t)0x0000000F) /*!< Fraction of USARTDIV */
+#define USART_BRR_DIV_MANTISSA ((uint32_t)0x0000FFF0) /*!< Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint32_t)0x000000FF) /*!< PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_GT ((uint32_t)0x0000FF00) /*!< GT[7:0] bits (Guard time value) */
+
+
+/******************* Bit definition for USART_RTOR register *****************/
+#define USART_RTOR_RTO ((uint32_t)0x00FFFFFF) /*!< Receiver Time Out Value */
+#define USART_RTOR_BLEN ((uint32_t)0xFF000000) /*!< Block Length */
+
+/******************* Bit definition for USART_RQR register ******************/
+#define USART_RQR_ABRRQ ((uint32_t)0x00000001) /*!< Auto-Baud Rate Request */
+#define USART_RQR_SBKRQ ((uint32_t)0x00000002) /*!< Send Break Request */
+#define USART_RQR_MMRQ ((uint32_t)0x00000004) /*!< Mute Mode Request */
+#define USART_RQR_RXFRQ ((uint32_t)0x00000008) /*!< Receive Data flush Request */
+
+/******************* Bit definition for USART_ISR register ******************/
+#define USART_ISR_PE ((uint32_t)0x00000001) /*!< Parity Error */
+#define USART_ISR_FE ((uint32_t)0x00000002) /*!< Framing Error */
+#define USART_ISR_NE ((uint32_t)0x00000004) /*!< Noise detected Flag */
+#define USART_ISR_ORE ((uint32_t)0x00000008) /*!< OverRun Error */
+#define USART_ISR_IDLE ((uint32_t)0x00000010) /*!< IDLE line detected */
+#define USART_ISR_RXNE ((uint32_t)0x00000020) /*!< Read Data Register Not Empty */
+#define USART_ISR_TC ((uint32_t)0x00000040) /*!< Transmission Complete */
+#define USART_ISR_TXE ((uint32_t)0x00000080) /*!< Transmit Data Register Empty */
+#define USART_ISR_CTSIF ((uint32_t)0x00000200) /*!< CTS interrupt flag */
+#define USART_ISR_CTS ((uint32_t)0x00000400) /*!< CTS flag */
+#define USART_ISR_RTOF ((uint32_t)0x00000800) /*!< Receiver Time Out */
+#define USART_ISR_EOBF ((uint32_t)0x00001000) /*!< End Of Block Flag */
+#define USART_ISR_ABRE ((uint32_t)0x00004000) /*!< Auto-Baud Rate Error */
+#define USART_ISR_ABRF ((uint32_t)0x00008000) /*!< Auto-Baud Rate Flag */
+#define USART_ISR_BUSY ((uint32_t)0x00010000) /*!< Busy Flag */
+#define USART_ISR_CMF ((uint32_t)0x00020000) /*!< Character Match Flag */
+#define USART_ISR_SBKF ((uint32_t)0x00040000) /*!< Send Break Flag */
+#define USART_ISR_TEACK ((uint32_t)0x00200000) /*!< Transmit Enable Acknowledge Flag */
+#define USART_ISR_REACK ((uint32_t)0x00400000) /*!< Receive Enable Acknowledge Flag */
+
+/******************* Bit definition for USART_ICR register ******************/
+#define USART_ICR_PECF ((uint32_t)0x00000001) /*!< Parity Error Clear Flag */
+#define USART_ICR_FECF ((uint32_t)0x00000002) /*!< Framing Error Clear Flag */
+#define USART_ICR_NCF ((uint32_t)0x00000004) /*!< Noise detected Clear Flag */
+#define USART_ICR_ORECF ((uint32_t)0x00000008) /*!< OverRun Error Clear Flag */
+#define USART_ICR_IDLECF ((uint32_t)0x00000010) /*!< IDLE line detected Clear Flag */
+#define USART_ICR_TCCF ((uint32_t)0x00000040) /*!< Transmission Complete Clear Flag */
+#define USART_ICR_CTSCF ((uint32_t)0x00000200) /*!< CTS Interrupt Clear Flag */
+#define USART_ICR_RTOCF ((uint32_t)0x00000800) /*!< Receiver Time Out Clear Flag */
+#define USART_ICR_CMCF ((uint32_t)0x00020000) /*!< Character Match Clear Flag */
+
+/******************* Bit definition for USART_RDR register ******************/
+#define USART_RDR_RDR ((uint16_t)0x01FF) /*!< RDR[8:0] bits (Receive Data value) */
+
+/******************* Bit definition for USART_TDR register ******************/
+#define USART_TDR_TDR ((uint16_t)0x01FF) /*!< TDR[8:0] bits (Transmit Data value) */
+
+/******************************************************************************/
+/* */
+/* USB Device General registers */
+/* */
+/******************************************************************************/
+#define USB_CNTR (USB_BASE + 0x40) /*!< Control register */
+#define USB_ISTR (USB_BASE + 0x44) /*!< Interrupt status register */
+#define USB_FNR (USB_BASE + 0x48) /*!< Frame number register */
+#define USB_DADDR (USB_BASE + 0x4C) /*!< Device address register */
+#define USB_BTABLE (USB_BASE + 0x50) /*!< Buffer Table address register */
+#define USB_LPMCSR (USB_BASE + 0x54) /*!< LPM Control and Status register */
+#define USB_BCDR (USB_BASE + 0x58) /*!< Battery Charging detector register*/
+
+/**************************** ISTR interrupt events *************************/
+#define USB_ISTR_CTR ((uint16_t)0x8000) /*!< Correct TRansfer (clear-only bit) */
+#define USB_ISTR_PMAOVR ((uint16_t)0x4000) /*!< DMA OVeR/underrun (clear-only bit) */
+#define USB_ISTR_ERR ((uint16_t)0x2000) /*!< ERRor (clear-only bit) */
+#define USB_ISTR_WKUP ((uint16_t)0x1000) /*!< WaKe UP (clear-only bit) */
+#define USB_ISTR_SUSP ((uint16_t)0x0800) /*!< SUSPend (clear-only bit) */
+#define USB_ISTR_RESET ((uint16_t)0x0400) /*!< RESET (clear-only bit) */
+#define USB_ISTR_SOF ((uint16_t)0x0200) /*!< Start Of Frame (clear-only bit) */
+#define USB_ISTR_ESOF ((uint16_t)0x0100) /*!< Expected Start Of Frame (clear-only bit) */
+#define USB_ISTR_L1REQ ((uint16_t)0x0080) /*!< LPM L1 state request */
+#define USB_ISTR_DIR ((uint16_t)0x0010) /*!< DIRection of transaction (read-only bit) */
+#define USB_ISTR_EP_ID ((uint16_t)0x000F) /*!< EndPoint IDentifier (read-only bit) */
+
+#define USB_CLR_CTR (~USB_ISTR_CTR) /*!< clear Correct TRansfer bit */
+#define USB_CLR_PMAOVR (~USB_ISTR_PMAOVR) /*!< clear DMA OVeR/underrun bit*/
+#define USB_CLR_ERR (~USB_ISTR_ERR) /*!< clear ERRor bit */
+#define USB_CLR_WKUP (~USB_ISTR_WKUP) /*!< clear WaKe UP bit */
+#define USB_CLR_SUSP (~USB_ISTR_SUSP) /*!< clear SUSPend bit */
+#define USB_CLR_RESET (~USB_ISTR_RESET) /*!< clear RESET bit */
+#define USB_CLR_SOF (~USB_ISTR_SOF) /*!< clear Start Of Frame bit */
+#define USB_CLR_ESOF (~USB_ISTR_ESOF) /*!< clear Expected Start Of Frame bit */
+#define USB_CLR_L1REQ (~USB_ISTR_L1REQ) /*!< clear LPM L1 bit */
+
+/************************* CNTR control register bits definitions ***********/
+#define USB_CNTR_CTRM ((uint16_t)0x8000) /*!< Correct TRansfer Mask */
+#define USB_CNTR_PMAOVRM ((uint16_t)0x4000) /*!< DMA OVeR/underrun Mask */
+#define USB_CNTR_ERRM ((uint16_t)0x2000) /*!< ERRor Mask */
+#define USB_CNTR_WKUPM ((uint16_t)0x1000) /*!< WaKe UP Mask */
+#define USB_CNTR_SUSPM ((uint16_t)0x0800) /*!< SUSPend Mask */
+#define USB_CNTR_RESETM ((uint16_t)0x0400) /*!< RESET Mask */
+#define USB_CNTR_SOFM ((uint16_t)0x0200) /*!< Start Of Frame Mask */
+#define USB_CNTR_ESOFM ((uint16_t)0x0100) /*!< Expected Start Of Frame Mask */
+#define USB_CNTR_L1REQM ((uint16_t)0x0080) /*!< LPM L1 state request interrupt mask */
+#define USB_CNTR_L1RESUME ((uint16_t)0x0020) /*!< LPM L1 Resume request */
+#define USB_CNTR_RESUME ((uint16_t)0x0010) /*!< RESUME request */
+#define USB_CNTR_FSUSP ((uint16_t)0x0008) /*!< Force SUSPend */
+#define USB_CNTR_LPMODE ((uint16_t)0x0004) /*!< Low-power MODE */
+#define USB_CNTR_PDWN ((uint16_t)0x0002) /*!< Power DoWN */
+#define USB_CNTR_FRES ((uint16_t)0x0001) /*!< Force USB RESet */
+
+/************************* BCDR control register bits definitions ***********/
+#define USB_BCDR_DPPU ((uint16_t)0x8000) /*!< DP Pull-up Enable */
+#define USB_BCDR_PS2DET ((uint16_t)0x0080) /*!< PS2 port or proprietary charger detected */
+#define USB_BCDR_SDET ((uint16_t)0x0040) /*!< Secondary detection (SD) status */
+#define USB_BCDR_PDET ((uint16_t)0x0020) /*!< Primary detection (PD) status */
+#define USB_BCDR_DCDET ((uint16_t)0x0010) /*!< Data contact detection (DCD) status */
+#define USB_BCDR_SDEN ((uint16_t)0x0008) /*!< Secondary detection (SD) mode enable */
+#define USB_BCDR_PDEN ((uint16_t)0x0004) /*!< Primary detection (PD) mode enable */
+#define USB_BCDR_DCDEN ((uint16_t)0x0002) /*!< Data contact detection (DCD) mode enable */
+#define USB_BCDR_BCDEN ((uint16_t)0x0001) /*!< Battery charging detector (BCD) enable */
+
+/*************************** LPM register bits definitions ******************/
+#define USB_LPMCSR_BESL ((uint16_t)0x00F0) /*!< BESL value received with last ACKed LPM Token */
+#define USB_LPMCSR_REMWAKE ((uint16_t)0x0008) /*!< bRemoteWake value received with last ACKed LPM Token */
+#define USB_LPMCSR_LPMACK ((uint16_t)0x0002) /*!< LPM Token acknowledge enable*/
+#define USB_LPMCSR_LMPEN ((uint16_t)0x0001) /*!< LPM support enable */
+
+/******************** FNR Frame Number Register bit definitions ************/
+#define USB_FNR_RXDP ((uint16_t)0x8000) /*!< status of D+ data line */
+#define USB_FNR_RXDM ((uint16_t)0x4000) /*!< status of D- data line */
+#define USB_FNR_LCK ((uint16_t)0x2000) /*!< LoCKed */
+#define USB_FNR_LSOF ((uint16_t)0x1800) /*!< Lost SOF */
+#define USB_FNR_FN ((uint16_t)0x07FF) /*!< Frame Number */
+
+/******************** DADDR Device ADDRess bit definitions ****************/
+#define USB_DADDR_EF ((uint8_t)0x80) /*!< USB device address Enable Function */
+#define USB_DADDR_ADD ((uint8_t)0x7F) /*!< USB device address */
+
+/****************************** Endpoint register *************************/
+#define USB_EP0R USB_BASE /*!< endpoint 0 register address */
+#define USB_EP1R (USB_BASE + 0x04) /*!< endpoint 1 register address */
+#define USB_EP2R (USB_BASE + 0x08) /*!< endpoint 2 register address */
+#define USB_EP3R (USB_BASE + 0x0C) /*!< endpoint 3 register address */
+#define USB_EP4R (USB_BASE + 0x10) /*!< endpoint 4 register address */
+#define USB_EP5R (USB_BASE + 0x14) /*!< endpoint 5 register address */
+#define USB_EP6R (USB_BASE + 0x18) /*!< endpoint 6 register address */
+#define USB_EP7R (USB_BASE + 0x1C) /*!< endpoint 7 register address */
+/* bit positions */
+#define USB_EP_CTR_RX ((uint16_t)0x8000) /*!< EndPoint Correct TRansfer RX */
+#define USB_EP_DTOG_RX ((uint16_t)0x4000) /*!< EndPoint Data TOGGLE RX */
+#define USB_EPRX_STAT ((uint16_t)0x3000) /*!< EndPoint RX STATus bit field */
+#define USB_EP_SETUP ((uint16_t)0x0800) /*!< EndPoint SETUP */
+#define USB_EP_T_FIELD ((uint16_t)0x0600) /*!< EndPoint TYPE */
+#define USB_EP_KIND ((uint16_t)0x0100) /*!< EndPoint KIND */
+#define USB_EP_CTR_TX ((uint16_t)0x0080) /*!< EndPoint Correct TRansfer TX */
+#define USB_EP_DTOG_TX ((uint16_t)0x0040) /*!< EndPoint Data TOGGLE TX */
+#define USB_EPTX_STAT ((uint16_t)0x0030) /*!< EndPoint TX STATus bit field */
+#define USB_EPADDR_FIELD ((uint16_t)0x000F) /*!< EndPoint ADDRess FIELD */
+
+/* EndPoint REGister MASK (no toggle fields) */
+#define USB_EPREG_MASK (USB_EP_CTR_RX|USB_EP_SETUP|USB_EP_T_FIELD|USB_EP_KIND|USB_EP_CTR_TX|USB_EPADDR_FIELD)
+ /*!< EP_TYPE[1:0] EndPoint TYPE */
+#define USB_EP_TYPE_MASK ((uint16_t)0x0600) /*!< EndPoint TYPE Mask */
+#define USB_EP_BULK ((uint16_t)0x0000) /*!< EndPoint BULK */
+#define USB_EP_CONTROL ((uint16_t)0x0200) /*!< EndPoint CONTROL */
+#define USB_EP_ISOCHRONOUS ((uint16_t)0x0400) /*!< EndPoint ISOCHRONOUS */
+#define USB_EP_INTERRUPT ((uint16_t)0x0600) /*!< EndPoint INTERRUPT */
+#define USB_EP_T_MASK (~USB_EP_T_FIELD & USB_EPREG_MASK)
+
+#define USB_EPKIND_MASK (~USB_EP_KIND & USB_EPREG_MASK) /*!< EP_KIND EndPoint KIND */
+ /*!< STAT_TX[1:0] STATus for TX transfer */
+#define USB_EP_TX_DIS ((uint16_t)0x0000) /*!< EndPoint TX DISabled */
+#define USB_EP_TX_STALL ((uint16_t)0x0010) /*!< EndPoint TX STALLed */
+#define USB_EP_TX_NAK ((uint16_t)0x0020) /*!< EndPoint TX NAKed */
+#define USB_EP_TX_VALID ((uint16_t)0x0030) /*!< EndPoint TX VALID */
+#define USB_EPTX_DTOG1 ((uint16_t)0x0010) /*!< EndPoint TX Data TOGgle bit1 */
+#define USB_EPTX_DTOG2 ((uint16_t)0x0020) /*!< EndPoint TX Data TOGgle bit2 */
+#define USB_EPTX_DTOGMASK (USB_EPTX_STAT|USB_EPREG_MASK)
+ /*!< STAT_RX[1:0] STATus for RX transfer */
+#define USB_EP_RX_DIS ((uint16_t)0x0000) /*!< EndPoint RX DISabled */
+#define USB_EP_RX_STALL ((uint16_t)0x1000) /*!< EndPoint RX STALLed */
+#define USB_EP_RX_NAK ((uint16_t)0x2000) /*!< EndPoint RX NAKed */
+#define USB_EP_RX_VALID ((uint16_t)0x3000) /*!< EndPoint RX VALID */
+#define USB_EPRX_DTOG1 ((uint16_t)0x1000) /*!< EndPoint RX Data TOGgle bit1 */
+#define USB_EPRX_DTOG2 ((uint16_t)0x2000) /*!< EndPoint RX Data TOGgle bit1 */
+#define USB_EPRX_DTOGMASK (USB_EPRX_STAT|USB_EPREG_MASK)
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG (WWDG) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint32_t)0x7F) /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint32_t)0x01) /*!<Bit 0 */
+#define WWDG_CR_T1 ((uint32_t)0x02) /*!<Bit 1 */
+#define WWDG_CR_T2 ((uint32_t)0x04) /*!<Bit 2 */
+#define WWDG_CR_T3 ((uint32_t)0x08) /*!<Bit 3 */
+#define WWDG_CR_T4 ((uint32_t)0x10) /*!<Bit 4 */
+#define WWDG_CR_T5 ((uint32_t)0x20) /*!<Bit 5 */
+#define WWDG_CR_T6 ((uint32_t)0x40) /*!<Bit 6 */
+
+#define WWDG_CR_WDGA ((uint32_t)0x80) /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint32_t)0x007F) /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint32_t)0x0001) /*!<Bit 0 */
+#define WWDG_CFR_W1 ((uint32_t)0x0002) /*!<Bit 1 */
+#define WWDG_CFR_W2 ((uint32_t)0x0004) /*!<Bit 2 */
+#define WWDG_CFR_W3 ((uint32_t)0x0008) /*!<Bit 3 */
+#define WWDG_CFR_W4 ((uint32_t)0x0010) /*!<Bit 4 */
+#define WWDG_CFR_W5 ((uint32_t)0x0020) /*!<Bit 5 */
+#define WWDG_CFR_W6 ((uint32_t)0x0040) /*!<Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint32_t)0x0180) /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint32_t)0x0080) /*!<Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint32_t)0x0100) /*!<Bit 1 */
+
+#define WWDG_CFR_EWI ((uint32_t)0x0200) /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint32_t)0x01) /*!<Early Wakeup Interrupt Flag */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macro
+ * @{
+ */
+
+/****************************** ADC Instances *********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == ADC1)
+
+#define IS_ADC_COMMON_INSTANCE(INSTANCE) ((INSTANCE) == ADC)
+
+/****************************** CRC Instances *********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+/******************************* DMA Instances ******************************/
+#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \
+ ((INSTANCE) == DMA1_Channel2) || \
+ ((INSTANCE) == DMA1_Channel3) || \
+ ((INSTANCE) == DMA1_Channel4) || \
+ ((INSTANCE) == DMA1_Channel5))
+
+/****************************** GPIO Instances ********************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOF))
+
+#define IS_GPIO_AF_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOF))
+
+/****************************** GPIO Lock Instances ****************************/
+#define IS_GPIO_LOCK_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB))
+
+/****************************** I2C Instances *********************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
+ ((INSTANCE) == I2C2))
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
+
+/****************************** SMBUS Instances *********************************/
+#define IS_SMBUS_ALL_INSTANCE(INSTANCE) ((INSTANCE) == I2C1)
+
+/****************************** SPI Instances *********************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2))
+
+/****************************** TIM Instances *********************************/
+#define IS_TIM_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CC2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_CC3_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CC4_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_HALL_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1))
+
+#define IS_TIM_XOR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_MASTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15))
+
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE)(0)
+
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_BREAK_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM3) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM14) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM15) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ (((CHANNEL) == TIM_CHANNEL_1))))
+
+#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))) \
+ || \
+ (((INSTANCE) == TIM15) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ ((CHANNEL) == TIM_CHANNEL_1)))
+
+#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3))
+
+#define IS_TIM_REPETITION_COUNTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM14) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_COMMUTATION_EVENT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17))
+
+#define IS_TIM_REMAP_INSTANCE(INSTANCE)\
+ ((INSTANCE) == TIM14)
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4))
+
+/******************** USART Instances : auto Baud rate detection **************/
+#define IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4))
+
+/******************** UART Instances : Half-Duplex mode **********************/
+#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4))
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == USART4))
+
+/****************** UART Instances : Auto Baud Rate detection ********************/
+#define IS_UART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2))
+
+
+/****************************** USB Instances ********************************/
+#define IS_USB_ALL_INSTANCE(INSTANCE) ((INSTANCE) == USB)
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+
+/**
+ * @}
+ */
+
+
+/******************************************************************************/
+/* For a painless codes migration between the STM32F0xx device product */
+/* lines, the aliases defined below are put in place to overcome the */
+/* differences in the interrupt handlers and IRQn definitions. */
+/* No need to update developed interrupt code when moving across */
+/* product lines within the same STM32F0 Family */
+/******************************************************************************/
+
+/* Aliases for __IRQn */
+#define RCC_CRS_IRQn RCC_IRQn
+#define DMA1_Ch1_IRQn DMA1_Channel1_IRQn
+#define DMA1_Ch2_3_DMA2_Ch1_2_IRQn DMA1_Channel2_3_IRQn
+#define DMA1_Ch4_7_DMA2_Ch3_5_IRQn DMA1_Channel4_5_IRQn
+#define DMA1_Channel4_5_6_7_IRQn DMA1_Channel4_5_IRQn
+#define ADC1_COMP_IRQn ADC1_IRQn
+#define TIM6_DAC_IRQn TIM6_IRQn
+#define USART3_8_IRQn USART3_4_IRQn
+#define USART3_6_IRQn USART3_4_IRQn
+
+/* Aliases for __IRQHandler */
+#define RCC_CRS_IRQHandler RCC_IRQHandler
+#define DMA1_Ch1_IRQHandler DMA1_Channel1_IRQHandler
+#define DMA1_Ch2_3_DMA2_Ch1_2_IRQHandler DMA1_Channel2_3_IRQHandler
+#define DMA1_Ch4_7_DMA2_Ch3_5_IRQHandler DMA1_Channel4_5_IRQHandler
+#define DMA1_Channel4_5_6_7_IRQHandler DMA1_Channel4_5_IRQHandler
+#define ADC1_COMP_IRQHandler ADC1_IRQHandler
+#define TIM6_DAC_IRQHandler TIM6_IRQHandler
+#define USART3_8_IRQHandler USART3_4_IRQHandler
+#define USART3_6_IRQHandler USART3_4_IRQHandler
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F070xB_H */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,237 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx.h
+ * @author MCD Application Team
+ * @version V2.2.0
+ * @date 05-December-2014
+ * @brief CMSIS STM32F0xx Device Peripheral Access Layer Header File.
+ *
+ * The file is the unique include file that the application programmer
+ * is using in the C source code, usually in main.c. This file contains:
+ * - Configuration section that allows to select:
+ * - The STM32F0xx device used in the target application
+ * - To use or not the peripherals drivers in application code(i.e.
+ * code will be based on direct access to peripherals registers
+ * rather than drivers API), this option is controlled by
+ * "#define USE_HAL_DRIVER"
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f0xx
+ * @{
+ */
+
+#ifndef __STM32F0xx_H
+#define __STM32F0xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/* Uncomment the line below according to the target STM32 device used in your
+ application
+ */
+
+#if !defined (STM32F030x6) && !defined (STM32F030x8) && \
+ !defined (STM32F031x6) && !defined (STM32F038xx) && \
+ !defined (STM32F042x6) && !defined (STM32F048xx) && !defined (STM32F070x6) && \
+ !defined (STM32F051x8) && !defined (STM32F058xx) && \
+ !defined (STM32F071xB) && !defined (STM32F072xB) && !defined (STM32F078xx) && !defined (STM32F070xB) && \
+ !defined (STM32F091xC) && !defined (STM32F098xx) && !defined (STM32F030xC)
+ /* #define STM32F030x6 */ /*!< STM32F030x4, STM32F030x6 Devices (STM32F030xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
+ /* #define STM32F030x8 */ /*!< STM32F030x8 Devices (STM32F030xx microcontrollers where the Flash memory is 64 Kbytes) */
+ /* #define STM32F031x6 */ /*!< STM32F031x4, STM32F031x6 Devices (STM32F031xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
+ /* #define STM32F038xx */ /*!< STM32F038xx Devices (STM32F038xx microcontrollers where the Flash memory is 32 Kbytes) */
+ /* #define STM32F042x6 */ /*!< STM32F042x4, STM32F042x6 Devices (STM32F042xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
+ /* #define STM32F048x6 */ /*!< STM32F048xx Devices (STM32F042xx microcontrollers where the Flash memory is 32 Kbytes) */
+ /* #define STM32F051x8 */ /*!< STM32F051x4, STM32F051x6, STM32F051x8 Devices (STM32F051xx microcontrollers where the Flash memory ranges between 16 and 64 Kbytes) */
+ /* #define STM32F058xx */ /*!< STM32F058xx Devices (STM32F058xx microcontrollers where the Flash memory is 64 Kbytes) */
+ /* #define STM32F070x6 */ /*!< STM32F070x6 Devices (STM32F070x6 microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
+#define STM32F070xB /*!< STM32F070xB Devices (STM32F070xB microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */
+ /* #define STM32F071xB */ /*!< STM32F071x8, STM32F071xB Devices (STM32F071xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */
+ /* #define STM32F072xB */ /*!< STM32F072x8, STM32F072xB Devices (STM32F072xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */
+ /* #define STM32F078xx */ /*!< STM32F078xx Devices (STM32F078xx microcontrollers where the Flash memory is 128 Kbytes) */
+ /* #define STM32F030xC */ /*!< STM32F030xC Devices (STM32F030xC microcontrollers where the Flash memory is 256 Kbytes) */
+ /* #define STM32F091xC */ /*!< STM32F091xC Devices (STM32F091xx microcontrollers where the Flash memory is 256 Kbytes) */
+ /* #define STM32F098xx */ /*!< STM32F098xx Devices (STM32F098xx microcontrollers where the Flash memory is 256 Kbytes) */
+#endif
+
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+ */
+#if !defined (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+#define USE_HAL_DRIVER
+#endif /* USE_HAL_DRIVER */
+
+/**
+ * @brief CMSIS Device version number V2.2.0
+ */
+#define __STM32F0xx_CMSIS_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */
+#define __STM32F0xx_CMSIS_DEVICE_VERSION_SUB1 (0x02) /*!< [23:16] sub1 version */
+#define __STM32F0xx_CMSIS_DEVICE_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
+#define __STM32F0xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32F0xx_CMSIS_DEVICE_VERSION ((__CMSIS_DEVICE_VERSION_MAIN << 24)\
+ |(__CMSIS_DEVICE_HAL_VERSION_SUB1 << 16)\
+ |(__CMSIS_DEVICE_HAL_VERSION_SUB2 << 8 )\
+ |(__CMSIS_DEVICE_HAL_VERSION_RC))
+
+/**
+ * @}
+ */
+
+/** @addtogroup Device_Included
+ * @{
+ */
+
+#if defined(STM32F030x6)
+ #include "stm32f030x6.h"
+#elif defined(STM32F030x8)
+ #include "stm32f030x8.h"
+#elif defined(STM32F031x6)
+ #include "stm32f031x6.h"
+#elif defined(STM32F038xx)
+ #include "stm32f038xx.h"
+#elif defined(STM32F042x6)
+ #include "stm32f042x6.h"
+#elif defined(STM32F048xx)
+ #include "stm32f048xx.h"
+#elif defined(STM32F051x8)
+ #include "stm32f051x8.h"
+#elif defined(STM32F058xx)
+ #include "stm32f058xx.h"
+#elif defined(STM32F070x6)
+ #include "stm32f070x6.h"
+#elif defined(STM32F070xB)
+ #include "stm32f070xb.h"
+#elif defined(STM32F071xB)
+ #include "stm32f071xb.h"
+#elif defined(STM32F072xB)
+ #include "stm32f072xb.h"
+#elif defined(STM32F078xx)
+ #include "stm32f078xx.h"
+#elif defined(STM32F091xC)
+ #include "stm32f091xc.h"
+#elif defined(STM32F098xx)
+ #include "stm32f098xx.h"
+#elif defined(STM32F030xC)
+ #include "stm32f030xc.h"
+#else
+ #error "Please select first the target STM32F0xx device used in your application (in stm32f0xx.h file)"
+#endif
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_types
+ * @{
+ */
+typedef enum
+{
+ RESET = 0,
+ SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+ DISABLE = 0,
+ ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+ ERROR = 0,
+ SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macros
+ * @{
+ */
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+
+/**
+ * @}
+ */
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f0xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F0xx_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,697 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief This file contains all the functions prototypes for the HAL
+ * module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_H
+#define __STM32F0xx_HAL_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_conf.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HAL
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup HAL_Exported_Constants HAL Exported Constants
+ * @{
+ */
+
+#if defined(SYSCFG_CFGR1_DMA_RMP)
+/** @defgroup HAL_DMA_remapping HAL DMA remapping
+ * Elements values convention: 0xYYYYYYYY
+ * - YYYYYYYY : Position in the SYSCFG register CFGR1
+ * @{
+ */
+#define HAL_REMAPDMA_ADC_DMA_CH2 ((uint32_t)SYSCFG_CFGR1_ADC_DMA_RMP) /*!< ADC DMA remap
+ 0: No remap (ADC DMA requests mapped on DMA channel 1
+ 1: Remap (ADC DMA requests mapped on DMA channel 2 */
+#define HAL_REMAPDMA_USART1_TX_DMA_CH4 ((uint32_t)SYSCFG_CFGR1_USART1TX_DMA_RMP) /*!< USART1 TX DMA remap
+ 0: No remap (USART1_TX DMA request mapped on DMA channel 2
+ 1: Remap (USART1_TX DMA request mapped on DMA channel 4 */
+#define HAL_REMAPDMA_USART1_RX_DMA_CH5 ((uint32_t)SYSCFG_CFGR1_USART1RX_DMA_RMP) /*!< USART1 RX DMA remap
+ 0: No remap (USART1_RX DMA request mapped on DMA channel 3
+ 1: Remap (USART1_RX DMA request mapped on DMA channel 5 */
+#define HAL_REMAPDMA_TIM16_DMA_CH4 ((uint32_t)SYSCFG_CFGR1_TIM16_DMA_RMP) /*!< TIM16 DMA request remap
+ 0: No remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 3)
+ 1: Remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 4) */
+#define HAL_REMAPDMA_TIM17_DMA_CH2 ((uint32_t)SYSCFG_CFGR1_TIM17_DMA_RMP) /*!< TIM17 DMA request remap
+ 0: No remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 1
+ 1: Remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 2) */
+
+#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx)
+#define HAL_REMAPDMA_TIM16_DMA_CH6 ((uint32_t)SYSCFG_CFGR1_TIM16_DMA_RMP2) /*!< TIM16 alternate DMA request remapping bit. Available on STM32F07x devices only
+ 0: No alternate remap (TIM16 DMA requestsmapped according to TIM16_DMA_RMP bit)
+ 1: Alternate remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA channel 6) */
+#define HAL_REMAPDMA_TIM17_DMA_CH7 ((uint32_t)SYSCFG_CFGR1_TIM17_DMA_RMP2) /*!< TIM17 alternate DMA request remapping bit. Available on STM32F07x devices only
+ 0: No alternate remap (TIM17 DMA requestsmapped according to TIM17_DMA_RMP bit)
+ 1: Alternate remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA channel 7) */
+#define HAL_REMAPDMA_SPI2_DMA_CH67 ((uint32_t)SYSCFG_CFGR1_SPI2_DMA_RMP) /*!< SPI2 DMA request remapping bit. Available on STM32F07x devices only.
+ 0: No remap (SPI2_RX and SPI2_TX DMA requests mapped on DMA channel 4 and 5 respectively)
+ 1: 1: Remap (SPI2_RX and SPI2_TX DMA requests mapped on DMA channel 6 and 7 respectively) */
+#define HAL_REMAPDMA_USART2_DMA_CH67 ((uint32_t)SYSCFG_CFGR1_USART2_DMA_RMP) /*!< USART2 DMA request remapping bit. Available on STM32F07x devices only.
+ 0: No remap (USART2_RX and USART2_TX DMA requests mapped on DMA channel 5 and 4 respectively)
+ 1: 1: Remap (USART2_RX and USART2_TX DMA requests mapped on DMA channel 6 and 7 respectively) */
+#define HAL_REMAPDMA_USART3_DMA_CH32 ((uint32_t)SYSCFG_CFGR1_USART3_DMA_RMP) /*!< USART3 DMA request remapping bit. Available on STM32F07x devices only.
+ 0: No remap (USART3_RX and USART3_TX DMA requests mapped on DMA channel 6 and 7 respectively)
+ 1: 1: Remap (USART3_RX and USART3_TX DMA requests mapped on DMA channel 3 and 2 respectively) */
+#define HAL_REMAPDMA_I2C1_DMA_CH76 ((uint32_t)SYSCFG_CFGR1_I2C1_DMA_RMP) /*!< I2C1 DMA request remapping bit. Available on STM32F07x devices only.
+ 0: No remap (I2C1_RX and I2C1_TX DMA requests mapped on DMA channel 3 and 2 respectively)
+ 1: Remap (I2C1_RX and I2C1_TX DMA requests mapped on DMA channel 7 and 6 respectively) */
+#define HAL_REMAPDMA_TIM1_DMA_CH6 ((uint32_t)SYSCFG_CFGR1_TIM1_DMA_RMP) /*!< TIM1 DMA request remapping bit. Available on STM32F07x devices only.
+ 0: No remap (TIM1_CH1, TIM1_CH2 and TIM1_CH3 DMA requests mapped on DMA channel 2, 3 and 4 respectively)
+ 1: Remap (TIM1_CH1, TIM1_CH2 and TIM1_CH3 DMA requests mapped on DMA channel 6 */
+#define HAL_REMAPDMA_TIM2_DMA_CH7 ((uint32_t)SYSCFG_CFGR1_TIM2_DMA_RMP) /*!< TIM2 DMA request remapping bit. Available on STM32F07x devices only.
+ 0: No remap (TIM2_CH2 and TIM2_CH4 DMA requests mapped on DMA channel 3 and 4 respectively)
+ 1: Remap (TIM2_CH2 and TIM2_CH4 DMA requests mapped on DMA channel 7 */
+#define HAL_REMAPDMA_TIM3_DMA_CH6 ((uint32_t)SYSCFG_CFGR1_TIM3_DMA_RMP) /*!< TIM3 DMA request remapping bit. Available on STM32F07x devices only.
+ 0: No remap (TIM3_CH1 and TIM3_TRIG DMA requests mapped on DMA channel 4)
+ 1: Remap (TIM3_CH1 and TIM3_TRIG DMA requests mapped on DMA channel 6) */
+#endif
+
+#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx)
+#define IS_HAL_REMAPDMA(RMP) (((RMP) == HAL_REMAPDMA_ADC_DMA_CH2) || \
+ ((RMP) == HAL_REMAPDMA_USART1_TX_DMA_CH4) || \
+ ((RMP) == HAL_REMAPDMA_USART1_RX_DMA_CH5) || \
+ ((RMP) == HAL_REMAPDMA_TIM16_DMA_CH4) || \
+ ((RMP) == HAL_REMAPDMA_TIM17_DMA_CH2) || \
+ ((RMP) == HAL_REMAPDMA_TIM16_DMA_CH6) || \
+ ((RMP) == HAL_REMAPDMA_TIM17_DMA_CH7) || \
+ ((RMP) == HAL_REMAPDMA_SPI2_DMA_CH67) || \
+ ((RMP) == HAL_REMAPDMA_USART2_DMA_CH67) || \
+ ((RMP) == HAL_REMAPDMA_USART3_DMA_CH32) || \
+ ((RMP) == HAL_REMAPDMA_I2C1_DMA_CH76) || \
+ ((RMP) == HAL_REMAPDMA_TIM1_DMA_CH6) || \
+ ((RMP) == HAL_REMAPDMA_TIM2_DMA_CH7) || \
+ ((RMP) == HAL_REMAPDMA_TIM3_DMA_CH6))
+#else
+#define IS_HAL_REMAPDMA(RMP) (((RMP) == HAL_REMAPDMA_ADC_DMA_CH2) || \
+ ((RMP) == HAL_REMAPDMA_USART1_TX_DMA_CH4) || \
+ ((RMP) == HAL_REMAPDMA_USART1_RX_DMA_CH5) || \
+ ((RMP) == HAL_REMAPDMA_TIM16_DMA_CH4) || \
+ ((RMP) == HAL_REMAPDMA_TIM17_DMA_CH2))
+#endif
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR1_DMA_RMP */
+
+#if defined(SYSCFG_CFGR1_PA11_PA12_RMP)
+/** @defgroup HAL_Pin_remapping HAL Pin remapping
+ * @{
+ */
+#define HAL_REMAP_PA11_PA12 (SYSCFG_CFGR1_PA11_PA12_RMP) /*!< PA11 and PA12 remapping bit for small packages (28 and 20 pins).
+ 0: No remap (pin pair PA9/10 mapped on the pins)
+ 1: Remap (pin pair PA11/12 mapped instead of PA9/10) */
+
+#define IS_HAL_REMAP_PIN(RMP) ((RMP) == HAL_REMAP_PA11_PA12)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR1_PA11_PA12_RMP */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+/** @defgroup HAL_IRDA_ENV_SEL HAL IRDA Enveloppe Selection
+ * @note Applicable on STM32F09x
+ * @{
+ */
+#define HAL_SYSCFG_IRDA_ENV_SEL_TIM16 (SYSCFG_CFGR1_IRDA_ENV_SEL_0 & SYSCFG_CFGR1_IRDA_ENV_SEL_1) /* 00: Timer16 is selected as IRDA Modulation enveloppe source */
+#define HAL_SYSCFG_IRDA_ENV_SEL_USART1 (SYSCFG_CFGR1_IRDA_ENV_SEL_0) /* 01: USART1 is selected as IRDA Modulation enveloppe source */
+#define HAL_SYSCFG_IRDA_ENV_SEL_USART4 (SYSCFG_CFGR1_IRDA_ENV_SEL_1) /* 10: USART4 is selected as IRDA Modulation enveloppe source */
+
+#define IS_HAL_SYSCFG_IRDA_ENV_SEL(SEL) (((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_TIM16) || \
+ ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART1) || \
+ ((SEL) == HAL_SYSCFG_IRDA_ENV_SEL_USART4))
+/**
+ * @}
+ */
+#endif /* STM32F091xC || STM32F098xx */
+
+
+/** @defgroup HAL_FastModePlus_I2C HAL FastModePlus I2C
+ * @{
+ */
+#if defined(SYSCFG_CFGR1_I2C_FMP_PB6)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 (SYSCFG_CFGR1_I2C_FMP_PB6) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
+ 0: PB6 pin operates in standard mode
+ 1: I2C FM+ mode enabled on PB6 pin, and the Speed control is bypassed */
+#endif /* SYSCFG_CFGR1_I2C_FMP_PB6 */
+
+#if defined(SYSCFG_CFGR1_I2C_FMP_PB7)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 (SYSCFG_CFGR1_I2C_FMP_PB7) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
+ 0: PB7 pin operates in standard mode
+ 1: I2C FM+ mode enabled on PB7 pin, and the Speed control is bypassed */
+#endif /* SYSCFG_CFGR1_I2C_FMP_PB7 */
+
+#if defined(SYSCFG_CFGR1_I2C_FMP_PB8)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 (SYSCFG_CFGR1_I2C_FMP_PB8) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
+ 0: PB8 pin operates in standard mode
+ 1: I2C FM+ mode enabled on PB8 pin, and the Speed control is bypassed */
+#endif /* SYSCFG_CFGR1_I2C_FMP_PB8 */
+
+#if defined(SYSCFG_CFGR1_I2C_FMP_PB9)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 (SYSCFG_CFGR1_I2C_FMP_PB9) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
+ 0: PB9 pin operates in standard mode
+ 1: I2C FM+ mode enabled on PB9 pin, and the Speed control is bypassed */
+#endif /* SYSCFG_CFGR1_I2C_FMP_PB9 */
+
+#if defined(SYSCFG_CFGR1_I2C_FMP_I2C1)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C1 (SYSCFG_CFGR1_I2C_FMP_I2C1) /*!< I2C1 fast mode Plus driving capability activation
+ 0: FM+ mode is not enabled on I2C1 pins selected through AF selection bits
+ 1: FM+ mode is enabled on I2C1 pins selected through AF selection bits */
+#endif /* SYSCFG_CFGR1_I2C_FMP_I2C1 */
+
+#if defined(SYSCFG_CFGR1_I2C_FMP_I2C2)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C2 (SYSCFG_CFGR1_I2C_FMP_I2C2) /*!< I2C2 fast mode Plus driving capability activation
+ 0: FM+ mode is not enabled on I2C2 pins selected through AF selection bits
+ 1: FM+ mode is enabled on I2C2 pins selected through AF selection bits */
+#endif /* SYSCFG_CFGR1_I2C_FMP_I2C2 */
+
+#if defined(SYSCFG_CFGR1_I2C_FMP_PA9)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 (SYSCFG_CFGR1_I2C_FMP_PA9) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
+ 0: PA9 pin operates in standard mode
+ 1: FM+ mode is enabled on PA9 pin, and the Speed control is bypassed */
+#endif /* SYSCFG_CFGR1_I2C_FMP_PA9 */
+
+#if defined(SYSCFG_CFGR1_I2C_FMP_PA10)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 (SYSCFG_CFGR1_I2C_FMP_PA10) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
+ 0: PA10 pin operates in standard mode
+ 1: FM+ mode is enabled on PA10 pin, and the Speed control is bypassed */
+#endif /* SYSCFG_CFGR1_I2C_FMP_PA10 */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F042x6) || defined(STM32F048xx)
+#define IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG(CONFIG) (((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C1) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C2) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PA9) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PA10) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB9))
+#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+#define IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG(CONFIG) (((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C1) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C2) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB9))
+#elif defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || defined(STM32F070x6) || defined(STM32F070xB) || defined(STM32F030x6)
+#define IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG(CONFIG) (((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C1) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PA9) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PA10) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB9))
+#else
+#define IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG(CONFIG) (((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB9))
+#endif
+
+/**
+ * @}
+ */
+
+#if defined(STM32F091xC) || defined (STM32F098xx)
+/** @defgroup HAL_ISR_Wrapper HAL ISR Wrapper
+ * @brief ISR Wrapper
+ * @note applicable on STM32F09x
+ * @{
+ */
+#define HAL_SYSCFG_ITLINE0 ((uint32_t) 0x00000000) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE1 ((uint32_t) 0x00000001) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE2 ((uint32_t) 0x00000002) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE3 ((uint32_t) 0x00000003) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE4 ((uint32_t) 0x00000004) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE5 ((uint32_t) 0x00000005) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE6 ((uint32_t) 0x00000006) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE7 ((uint32_t) 0x00000007) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE8 ((uint32_t) 0x00000008) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE9 ((uint32_t) 0x00000009) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE10 ((uint32_t) 0x0000000A) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE11 ((uint32_t) 0x0000000B) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE12 ((uint32_t) 0x0000000C) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE13 ((uint32_t) 0x0000000D) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE14 ((uint32_t) 0x0000000E) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE15 ((uint32_t) 0x0000000F) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE16 ((uint32_t) 0x00000010) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE17 ((uint32_t) 0x00000011) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE18 ((uint32_t) 0x00000012) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE19 ((uint32_t) 0x00000013) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE20 ((uint32_t) 0x00000014) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE21 ((uint32_t) 0x00000015) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE22 ((uint32_t) 0x00000016) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE23 ((uint32_t) 0x00000017) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE24 ((uint32_t) 0x00000018) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE25 ((uint32_t) 0x00000019) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE26 ((uint32_t) 0x0000001A) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE27 ((uint32_t) 0x0000001B) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE28 ((uint32_t) 0x0000001C) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE29 ((uint32_t) 0x0000001D) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE30 ((uint32_t) 0x0000001E) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE31 ((uint32_t) 0x0000001F) /*!< Internal define for macro handling */
+
+#define HAL_ITLINE_EWDG ((uint32_t) ((HAL_SYSCFG_ITLINE0 << 0x18) | SYSCFG_ITLINE0_SR_EWDG)) /*!< EWDG has expired .... */
+#if defined(STM32F091xC)
+#define HAL_ITLINE_PVDOUT ((uint32_t) ((HAL_SYSCFG_ITLINE1 << 0x18) | SYSCFG_ITLINE1_SR_PVDOUT)) /*!< Power voltage detection Interrupt .... */
+#endif
+#define HAL_ITLINE_VDDIO2 ((uint32_t) ((HAL_SYSCFG_ITLINE1 << 0x18) | SYSCFG_ITLINE1_SR_VDDIO2)) /*!< VDDIO2 Interrupt .... */
+#define HAL_ITLINE_RTC_WAKEUP ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18) | SYSCFG_ITLINE2_SR_RTC_WAKEUP)) /*!< RTC WAKEUP -> exti[20] Interrupt */
+#define HAL_ITLINE_RTC_TSTAMP ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18) | SYSCFG_ITLINE2_SR_RTC_TSTAMP)) /*!< RTC Time Stamp -> exti[19] interrupt */
+#define HAL_ITLINE_RTC_ALRA ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18) | SYSCFG_ITLINE2_SR_RTC_ALRA)) /*!< RTC Alarm -> exti[17] interrupt .... */
+#define HAL_ITLINE_FLASH_ITF ((uint32_t) ((HAL_SYSCFG_ITLINE3 << 0x18) | SYSCFG_ITLINE3_SR_FLASH_ITF)) /*!< Flash ITF Interrupt */
+#define HAL_ITLINE_CRS ((uint32_t) ((HAL_SYSCFG_ITLINE4 << 0x18) | SYSCFG_ITLINE4_SR_CRS)) /*!< CRS Interrupt */
+#define HAL_ITLINE_CLK_CTRL ((uint32_t) ((HAL_SYSCFG_ITLINE4 << 0x18) | SYSCFG_ITLINE4_SR_CLK_CTRL)) /*!< CLK Control Interrupt */
+#define HAL_ITLINE_EXTI0 ((uint32_t) ((HAL_SYSCFG_ITLINE5 << 0x18) | SYSCFG_ITLINE5_SR_EXTI0)) /*!< External Interrupt 0 */
+#define HAL_ITLINE_EXTI1 ((uint32_t) ((HAL_SYSCFG_ITLINE5 << 0x18) | SYSCFG_ITLINE5_SR_EXTI1)) /*!< External Interrupt 1 */
+#define HAL_ITLINE_EXTI2 ((uint32_t) ((HAL_SYSCFG_ITLINE6 << 0x18) | SYSCFG_ITLINE6_SR_EXTI2)) /*!< External Interrupt 2 */
+#define HAL_ITLINE_EXTI3 ((uint32_t) ((HAL_SYSCFG_ITLINE6 << 0x18) | SYSCFG_ITLINE6_SR_EXTI3)) /*!< External Interrupt 3 */
+#define HAL_ITLINE_EXTI4 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI4)) /*!< EXTI4 Interrupt */
+#define HAL_ITLINE_EXTI5 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI5)) /*!< EXTI5 Interrupt */
+#define HAL_ITLINE_EXTI6 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI6)) /*!< EXTI6 Interrupt */
+#define HAL_ITLINE_EXTI7 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI7)) /*!< EXTI7 Interrupt */
+#define HAL_ITLINE_EXTI8 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI8)) /*!< EXTI8 Interrupt */
+#define HAL_ITLINE_EXTI9 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI9)) /*!< EXTI9 Interrupt */
+#define HAL_ITLINE_EXTI10 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI10)) /*!< EXTI10 Interrupt */
+#define HAL_ITLINE_EXTI11 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI11)) /*!< EXTI11 Interrupt */
+#define HAL_ITLINE_EXTI12 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI12)) /*!< EXTI12 Interrupt */
+#define HAL_ITLINE_EXTI13 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI13)) /*!< EXTI13 Interrupt */
+#define HAL_ITLINE_EXTI14 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI14)) /*!< EXTI14 Interrupt */
+#define HAL_ITLINE_EXTI15 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI15)) /*!< EXTI15 Interrupt */
+#define HAL_ITLINE_TSC_EOA ((uint32_t) ((HAL_SYSCFG_ITLINE8 << 0x18) | SYSCFG_ITLINE8_SR_TSC_EOA)) /*!< Touch control EOA Interrupt */
+#define HAL_ITLINE_TSC_MCE ((uint32_t) ((HAL_SYSCFG_ITLINE8 << 0x18) | SYSCFG_ITLINE8_SR_TSC_MCE)) /*!< Touch control MCE Interrupt */
+#define HAL_ITLINE_DMA1_CH1 ((uint32_t) ((HAL_SYSCFG_ITLINE9 << 0x18) | SYSCFG_ITLINE9_SR_DMA1_CH1)) /*!< DMA1 Channel 1 Interrupt */
+#define HAL_ITLINE_DMA1_CH2 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA1_CH2)) /*!< DMA1 Channel 2 Interrupt */
+#define HAL_ITLINE_DMA1_CH3 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA1_CH3)) /*!< DMA1 Channel 3 Interrupt */
+#define HAL_ITLINE_DMA2_CH1 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA2_CH1)) /*!< DMA2 Channel 1 Interrupt */
+#define HAL_ITLINE_DMA2_CH2 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA2_CH2)) /*!< DMA2 Channel 2 Interrupt */
+#define HAL_ITLINE_DMA1_CH4 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH4)) /*!< DMA1 Channel 4 Interrupt */
+#define HAL_ITLINE_DMA1_CH5 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH5)) /*!< DMA1 Channel 5 Interrupt */
+#define HAL_ITLINE_DMA1_CH6 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH6)) /*!< DMA1 Channel 6 Interrupt */
+#define HAL_ITLINE_DMA1_CH7 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH7)) /*!< DMA1 Channel 7 Interrupt */
+#define HAL_ITLINE_DMA2_CH3 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA2_CH3)) /*!< DMA2 Channel 3 Interrupt */
+#define HAL_ITLINE_DMA2_CH4 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA2_CH4)) /*!< DMA2 Channel 4 Interrupt */
+#define HAL_ITLINE_DMA2_CH5 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA2_CH5)) /*!< DMA2 Channel 5 Interrupt */
+#define HAL_ITLINE_ADC ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18) | SYSCFG_ITLINE12_SR_ADC)) /*!< ADC Interrupt */
+#define HAL_ITLINE_COMP1 ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18) | SYSCFG_ITLINE12_SR_COMP1)) /*!< COMP1 Interrupt -> exti[21] */
+#define HAL_ITLINE_COMP2 ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18) | SYSCFG_ITLINE12_SR_COMP2)) /*!< COMP2 Interrupt -> exti[21] */
+#define HAL_ITLINE_TIM1_BRK ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_BRK)) /*!< TIM1 BRK Interrupt */
+#define HAL_ITLINE_TIM1_UPD ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_UPD)) /*!< TIM1 UPD Interrupt */
+#define HAL_ITLINE_TIM1_TRG ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_TRG)) /*!< TIM1 TRG Interrupt */
+#define HAL_ITLINE_TIM1_CCU ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_CCU)) /*!< TIM1 CCU Interrupt */
+#define HAL_ITLINE_TIM1_CC ((uint32_t) ((HAL_SYSCFG_ITLINE14 << 0x18) | SYSCFG_ITLINE14_SR_TIM1_CC)) /*!< TIM1 CC Interrupt */
+#define HAL_ITLINE_TIM2 ((uint32_t) ((HAL_SYSCFG_ITLINE15 << 0x18) | SYSCFG_ITLINE15_SR_TIM2_GLB)) /*!< TIM2 Interrupt */
+#define HAL_ITLINE_TIM3 ((uint32_t) ((HAL_SYSCFG_ITLINE16 << 0x18) | SYSCFG_ITLINE16_SR_TIM3_GLB)) /*!< TIM3 Interrupt */
+#define HAL_ITLINE_DAC ((uint32_t) ((HAL_SYSCFG_ITLINE17 << 0x18) | SYSCFG_ITLINE17_SR_DAC)) /*!< DAC Interrupt */
+#define HAL_ITLINE_TIM6 ((uint32_t) ((HAL_SYSCFG_ITLINE17 << 0x18) | SYSCFG_ITLINE17_SR_TIM6_GLB)) /*!< TIM6 Interrupt */
+#define HAL_ITLINE_TIM7 ((uint32_t) ((HAL_SYSCFG_ITLINE18 << 0x18) | SYSCFG_ITLINE18_SR_TIM7_GLB)) /*!< TIM7 Interrupt */
+#define HAL_ITLINE_TIM14 ((uint32_t) ((HAL_SYSCFG_ITLINE19 << 0x18) | SYSCFG_ITLINE19_SR_TIM14_GLB)) /*!< TIM14 Interrupt */
+#define HAL_ITLINE_TIM15 ((uint32_t) ((HAL_SYSCFG_ITLINE20 << 0x18) | SYSCFG_ITLINE20_SR_TIM15_GLB)) /*!< TIM15 Interrupt */
+#define HAL_ITLINE_TIM16 ((uint32_t) ((HAL_SYSCFG_ITLINE21 << 0x18) | SYSCFG_ITLINE21_SR_TIM16_GLB)) /*!< TIM16 Interrupt */
+#define HAL_ITLINE_TIM17 ((uint32_t) ((HAL_SYSCFG_ITLINE22 << 0x18) | SYSCFG_ITLINE22_SR_TIM17_GLB)) /*!< TIM17 Interrupt */
+#define HAL_ITLINE_I2C1 ((uint32_t) ((HAL_SYSCFG_ITLINE23 << 0x18) | SYSCFG_ITLINE23_SR_I2C1_GLB)) /*!< I2C1 Interrupt -> exti[23] */
+#define HAL_ITLINE_I2C2 ((uint32_t) ((HAL_SYSCFG_ITLINE24 << 0x18) | SYSCFG_ITLINE24_SR_I2C2_GLB)) /*!< I2C2 Interrupt */
+#define HAL_ITLINE_SPI1 ((uint32_t) ((HAL_SYSCFG_ITLINE25 << 0x18) | SYSCFG_ITLINE25_SR_SPI1)) /*!< I2C1 Interrupt -> exti[23] */
+#define HAL_ITLINE_SPI2 ((uint32_t) ((HAL_SYSCFG_ITLINE26 << 0x18) | SYSCFG_ITLINE26_SR_SPI2)) /*!< SPI1 Interrupt */
+#define HAL_ITLINE_USART1 ((uint32_t) ((HAL_SYSCFG_ITLINE27 << 0x18) | SYSCFG_ITLINE27_SR_USART1_GLB)) /*!< USART1 GLB Interrupt -> exti[25] */
+#define HAL_ITLINE_USART2 ((uint32_t) ((HAL_SYSCFG_ITLINE28 << 0x18) | SYSCFG_ITLINE28_SR_USART2_GLB)) /*!< USART2 GLB Interrupt -> exti[26] */
+#define HAL_ITLINE_USART3 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART3_GLB)) /*!< USART3 Interrupt .... */
+#define HAL_ITLINE_USART4 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART4_GLB)) /*!< USART4 Interrupt .... */
+#define HAL_ITLINE_USART5 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART5_GLB)) /*!< USART5 Interrupt .... */
+#define HAL_ITLINE_USART6 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART6_GLB)) /*!< USART6 Interrupt .... */
+#define HAL_ITLINE_USART7 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART7_GLB)) /*!< USART7 Interrupt .... */
+#define HAL_ITLINE_USART8 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART8_GLB)) /*!< USART8 Interrupt .... */
+#define HAL_ITLINE_CAN ((uint32_t) ((HAL_SYSCFG_ITLINE30 << 0x18) | SYSCFG_ITLINE30_SR_CAN)) /*!< CAN Interrupt */
+#define HAL_ITLINE_CEC ((uint32_t) ((HAL_SYSCFG_ITLINE30 << 0x18) | SYSCFG_ITLINE30_SR_CEC)) /*!< CEC Interrupt -> exti[27] */
+/**
+ * @}
+ */
+#endif /* STM32F091xC || STM32F098xx */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup HAL_Exported_Macros HAL Exported Macros
+ * @{
+ */
+
+/** @defgroup HAL_Freeze_Unfreeze_Peripherals HAL Freeze Unfreeze Peripherals
+ * @brief Freeze/Unfreeze Peripherals in Debug mode
+ * @{
+ */
+
+#if defined(DBGMCU_APB1_FZ_DBG_CAN_STOP)
+#define __HAL_FREEZE_CAN_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN_STOP))
+#define __HAL_UNFREEZE_CAN_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_CAN_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_RTC_STOP)
+#define __HAL_FREEZE_RTC_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_UNFREEZE_RTC_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_RTC_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)
+#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#endif /* DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT */
+
+#if defined(DBGMCU_APB1_FZ_DBG_IWDG_STOP)
+#define __HAL_FREEZE_IWDG_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_UNFREEZE_IWDG_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_IWDG_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_WWDG_STOP)
+#define __HAL_FREEZE_WWDG_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_UNFREEZE_WWDG_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_WWDG_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM2_STOP)
+#define __HAL_FREEZE_TIM2_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_UNFREEZE_TIM2_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM2_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM3_STOP)
+#define __HAL_FREEZE_TIM3_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#define __HAL_UNFREEZE_TIM3_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM3_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM6_STOP)
+#define __HAL_FREEZE_TIM6_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_UNFREEZE_TIM6_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM6_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM7_STOP)
+#define __HAL_FREEZE_TIM7_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#define __HAL_UNFREEZE_TIM7_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM7_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM14_STOP)
+#define __HAL_FREEZE_TIM14_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#define __HAL_UNFREEZE_TIM14_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM14_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM1_STOP)
+#define __HAL_FREEZE_TIM1_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#define __HAL_UNFREEZE_TIM1_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM1_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM15_STOP)
+#define __HAL_FREEZE_TIM15_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM15_STOP))
+#define __HAL_UNFREEZE_TIM15_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM15_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM15_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM16_STOP)
+#define __HAL_FREEZE_TIM16_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM16_STOP))
+#define __HAL_UNFREEZE_TIM16_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM16_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM16_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM17_STOP)
+#define __HAL_FREEZE_TIM17_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM17_STOP))
+#define __HAL_UNFREEZE_TIM17_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM17_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM17_STOP */
+
+/**
+ * @}
+ */
+
+/** @defgroup Memory_Mapping_Selection Memory Mapping Selection
+ * @{
+ */
+#if defined(SYSCFG_CFGR1_MEM_MODE)
+/** @brief Main Flash memory mapped at 0x00000000
+ */
+#define __HAL_REMAPMEMORY_FLASH() (SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE))
+#endif /* SYSCFG_CFGR1_MEM_MODE */
+
+#if defined(SYSCFG_CFGR1_MEM_MODE_0)
+/** @brief System Flash memory mapped at 0x00000000
+ */
+#define __HAL_REMAPMEMORY_SYSTEMFLASH() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE); \
+ SYSCFG->CFGR1 |= SYSCFG_CFGR1_MEM_MODE_0; \
+ }while(0)
+#endif /* SYSCFG_CFGR1_MEM_MODE_0 */
+
+#if defined(SYSCFG_CFGR1_MEM_MODE_0) && defined(SYSCFG_CFGR1_MEM_MODE_1)
+/** @brief Embedded SRAM mapped at 0x00000000
+ */
+#define __HAL_REMAPMEMORY_SRAM() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE); \
+ SYSCFG->CFGR1 |= (SYSCFG_CFGR1_MEM_MODE_0 | SYSCFG_CFGR1_MEM_MODE_1); \
+ }while(0)
+#endif /* SYSCFG_CFGR1_MEM_MODE_0 && SYSCFG_CFGR1_MEM_MODE_1 */
+/**
+ * @}
+ */
+
+#if defined(SYSCFG_CFGR1_DMA_RMP)
+/** @defgroup HAL_DMA_remap HAL DMA remap
+ * @brief DMA remapping enable/disable macros
+ * @param __DMA_REMAP__: This parameter can be a value of @ref HAL_DMA_remapping
+ * @{
+ */
+#define __HAL_REMAPDMA_CHANNEL_ENABLE(__DMA_REMAP__) do {assert_param(IS_HAL_REMAPDMA((__DMA_REMAP__))); \
+ SYSCFG->CFGR1 |= (__DMA_REMAP__); \
+ }while(0)
+#define __HAL_REMAPDMA_CHANNEL_DISABLE(__DMA_REMAP__) do {assert_param(IS_HAL_REMAPDMA((__DMA_REMAP__))); \
+ SYSCFG->CFGR1 &= ~(__DMA_REMAP__); \
+ }while(0)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR1_DMA_RMP */
+
+#if defined(SYSCFG_CFGR1_PA11_PA12_RMP)
+/** @defgroup HAL_Pin_remap HAL Pin remap
+ * @brief Pin remapping enable/disable macros
+ * @param __PIN_REMAP__: This parameter can be a value of @ref HAL_Pin_remapping
+ * @{
+ */
+#define __HAL_REMAP_PIN_ENABLE(__PIN_REMAP__) do {assert_param(IS_HAL_REMAP_PIN((__PIN_REMAP__))); \
+ SYSCFG->CFGR1 |= (__PIN_REMAP__); \
+ }while(0)
+#define __HAL_REMAP_PIN_DISABLE(__PIN_REMAP__) do {assert_param(IS_HAL_REMAP_PIN((__PIN_REMAP__))); \
+ SYSCFG->CFGR1 &= ~(__PIN_REMAP__); \
+ }while(0)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR1_PA11_PA12_RMP */
+
+/** @defgroup HAL_Fast_mode_plus_driving_cap HAL Fast mode plus driving cap
+ * @brief Fast mode Plus driving capability enable/disable macros
+ * @param __FASTMODEPLUS__: This parameter can be a value of @ref HAL_FastModePlus_I2C
+ * @{
+ */
+#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE(__FASTMODEPLUS__) do {assert_param(IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG((__FASTMODEPLUS__))); \
+ SYSCFG->CFGR1 |= (__FASTMODEPLUS__); \
+ }while(0)
+
+#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE(__FASTMODEPLUS__) do {assert_param(IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG((__FASTMODEPLUS__))); \
+ SYSCFG->CFGR1 &= ~(__FASTMODEPLUS__); \
+ }while(0)
+/**
+ * @}
+ */
+
+#if defined(SYSCFG_CFGR2_LOCKUP_LOCK)
+/** @defgroup Cortex_Lockup_Enable Cortex Lockup Enable
+ * @{
+ */
+/** @brief SYSCFG Break Lockup lock
+ * Enables and locks the connection of Cortex-M0 LOCKUP (Hardfault) output to TIM1/15/16/17 Break input
+ * @note The selected configuration is locked and can be unlocked by system reset
+ */
+#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_LOCKUP_LOCK); \
+ SYSCFG->CFGR2 |= SYSCFG_CFGR2_LOCKUP_LOCK; \
+ }while(0)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR2_LOCKUP_LOCK */
+
+#if defined(SYSCFG_CFGR2_PVD_LOCK)
+/** @defgroup PVD_Lock_Enable PVD Lock
+ * @{
+ */
+/** @brief SYSCFG Break PVD lock
+ * Enables and locks the PVD connection with Timer1/8/15/16/17 Break Input, , as well as the PVDE and PLS[2:0] in the PWR_CR register
+ * @note The selected configuration is locked and can be unlocked by system reset
+ */
+#define __HAL_SYSCFG_BREAK_PVD_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_PVD_LOCK); \
+ SYSCFG->CFGR2 |= SYSCFG_CFGR2_PVD_LOCK; \
+ }while(0)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR2_PVD_LOCK */
+
+#if defined(SYSCFG_CFGR2_SRAM_PARITY_LOCK)
+/** @defgroup SRAM_Parity_Lock SRAM Parity Lock
+ * @{
+ */
+/** @brief SYSCFG Break SRAM PARITY lock
+ * Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1/8/15/16/17
+ * @note The selected configuration is locked and can be unlocked by system reset
+ */
+#define __HAL_SYSCFG_BREAK_SRAMPARITY_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_SRAM_PARITY_LOCK); \
+ SYSCFG->CFGR2 |= SYSCFG_CFGR2_SRAM_PARITY_LOCK; \
+ }while(0)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR2_SRAM_PARITY_LOCK */
+
+#if defined(SYSCFG_CFGR2_SRAM_PEF)
+/** @defgroup HAL_SYSCFG_Parity_check_on_RAM HAL SYSCFG Parity check on RAM
+ * @brief Parity check on RAM disable macro
+ * @note Disabling the parity check on RAM locks the configuration bit.
+ * To re-enable the parity check on RAM perform a system reset.
+ * @{
+ */
+#define __HAL_SYSCFG_RAM_PARITYCHECK_DISABLE() (SYSCFG->CFGR2 |= SYSCFG_CFGR2_SRAM_PEF)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR2_SRAM_PEF */
+
+
+#if defined(STM32F091xC) || defined (STM32F098xx)
+/** @defgroup HAL_ISR_wrapper_check HAL ISR wrapper check
+ * @brief ISR wrapper check
+ * @note This feature is applicable on STM32F09x
+ * @note Allow to determine interrupt source per line.
+ * @{
+ */
+#define __HAL_GET_PENDING_IT(__SOURCE__) (SYSCFG->IT_LINE_SR[((__SOURCE__) >> 0x18)] & ((__SOURCE__) & 0x00FFFFFF))
+/**
+ * @}
+ */
+#endif /* (STM32F091xC) || defined (STM32F098xx)*/
+
+#if defined(STM32F091xC) || defined (STM32F098xx)
+/** @defgroup HAL_SYSCFG_IRDA_modulation_envelope_selection HAL SYSCFG IRDA modulation envelope selection
+ * @brief selection of the modulation envelope signal macro, using bits [7:6] of SYS_CTRL(CFGR1) register
+ * @note This feature is applicable on STM32F09x
+ * @param __SOURCE__: This parameter can be a value of @ref HAL_IRDA_ENV_SEL
+ * @{
+ */
+#define __HAL_SYSCFG_IRDA_ENV_SELECTION(__SOURCE__) do {assert_param(IS_HAL_SYSCFG_IRDA_ENV_SEL((__SOURCE__))); \
+ SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_IRDA_ENV_SEL); \
+ SYSCFG->CFGR1 |= (__SOURCE__); \
+ }while(0)
+
+#define __HAL_SYSCFG_GET_IRDA_ENV_SELECTION() ((SYSCFG->CFGR1) & 0x000000C0)
+/**
+ * @}
+ */
+#endif /* (STM32F091xC) || defined (STM32F098xx)*/
+
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HAL_Exported_Functions HAL Exported Functions
+ * @{
+ */
+
+/** @addtogroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions
+ * @brief Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization and de-initialization functions ******************************/
+HAL_StatusTypeDef HAL_Init(void);
+HAL_StatusTypeDef HAL_DeInit(void);
+void HAL_MspInit(void);
+void HAL_MspDeInit(void);
+HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);
+/**
+ * @}
+ */
+
+/** @addtogroup HAL_Exported_Functions_Group2 HAL Control functions
+ * @brief HAL Control functions
+ * @{
+ */
+/* Peripheral Control functions **********************************************/
+void HAL_IncTick(void);
+void HAL_Delay(__IO uint32_t Delay);
+uint32_t HAL_GetTick(void);
+void HAL_SuspendTick(void);
+void HAL_ResumeTick(void);
+uint32_t HAL_GetHalVersion(void);
+uint32_t HAL_GetREVID(void);
+uint32_t HAL_GetDEVID(void);
+void HAL_EnableDBGStopMode(void);
+void HAL_DisableDBGStopMode(void);
+void HAL_EnableDBGStandbyMode(void);
+void HAL_DisableDBGStandbyMode(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_adc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,951 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_adc.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file containing functions prototypes of ADC HAL library.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_ADC_H
+#define __STM32F0xx_HAL_ADC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup ADC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup ADC_Exported_Types ADC Exported Types
+ * @{
+ */
+
+/**
+ * @brief Structure definition of ADC initialization and regular group
+ * @note The setting of these parameters with function HAL_ADC_Init() is conditioned to ADC state.
+ * ADC state can be either:
+ * - For all parameters: ADC disabled (this is the only possible ADC state to modify parameter 'ClockPrescaler')
+ * - For all parameters except 'ClockPrescaler': ADC enabled without conversion on going on regular group.
+ * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed
+ * without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly).
+ */
+typedef struct
+{
+ uint32_t ClockPrescaler; /*!< Select ADC clock source (synchronous clock derived from APB clock or asynchronous clock derived from ADC dedicated HSI RC oscillator 14MHz) and clock prescaler.
+ This parameter can be a value of @ref ADC_ClockPrescaler
+ Note: In case of usage of the ADC dedicated HSI RC oscillator, it must be preliminarily enabled at RCC top level.
+ Note: This parameter can be modified only if the ADC is disabled */
+ uint32_t Resolution; /*!< Configures the ADC resolution.
+ This parameter can be a value of @ref ADC_Resolution */
+ uint32_t DataAlign; /*!< Specifies whether the ADC data alignment is left or right.
+ This parameter can be a value of @ref ADC_Data_align */
+ uint32_t ScanConvMode; /*!< Configures the sequencer of regular group.
+ This parameter can be associated to parameter 'DiscontinuousConvMode' to have main sequence subdivided in successive parts.
+ Sequencer is automatically enabled if several channels are set (sequencer cannot be disabled, as it can be the case on other STM32 devices):
+ If only 1 channel is set: Conversion is performed in single mode.
+ If several channels are set: Conversions are performed in sequence mode (ranks defined by each channel number: channel 0 fixed on rank 0, channel 1 fixed on rank1, ...).
+ Scan direction can be set to forward (from channel 0 to channel 18) or backward (from channel 18 to channel 0).
+ This parameter can be a value of @ref ADC_Scan_mode */
+ uint32_t EOCSelection; /*!< Specifies what EOC (End Of Conversion) flag is used for conversion by polling and interruption: end of conversion of each rank or complete sequence.
+ This parameter can be a value of @ref ADC_EOCSelection. */
+ uint32_t LowPowerAutoWait; /*!< Selects the dynamic low power Auto Delay: new conversion start only when the previous
+ conversion (for regular group) or previous sequence (for injected group) has been treated by user software.
+ This feature automatically adapts the speed of ADC to the speed of the system that reads the data. Moreover, this avoids risk of overrun for low frequency applications.
+ This parameter can be set to ENABLE or DISABLE.
+ Note: Do not use with interruption or DMA (HAL_ADC_Start_IT(), HAL_ADC_Start_DMA()) since they have to clear immediately the EOC flag to free the IRQ vector sequencer.
+ Do use with polling: 1. Start conversion with HAL_ADC_Start(), 2. Later on, when conversion data is needed: use HAL_ADC_PollForConversion() to ensure that conversion is completed
+ and use HAL_ADC_GetValue() to retrieve conversion result and trig another conversion. */
+ uint32_t LowPowerAutoPowerOff; /*!< Selects the auto-off mode: the ADC automatically powers-off after a conversion and automatically wakes-up when a new conversion is triggered (with startup time between trigger and start of sampling).
+ This feature can be combined with automatic wait mode (parameter 'LowPowerAutoWait').
+ This parameter can be set to ENABLE or DISABLE.
+ Note: If enabled, this feature also turns off the ADC dedicated 14 MHz RC oscillator (HSI14) */
+ uint32_t ContinuousConvMode; /*!< Specifies whether the conversion is performed in single mode (one conversion) or continuous mode for regular group,
+ after the selected trigger occurred (software start or external trigger).
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t DiscontinuousConvMode; /*!< Specifies whether the conversions sequence of regular group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
+ Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
+ Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
+ This parameter can be set to ENABLE or DISABLE
+ Note: Number of discontinuous ranks increment is fixed to one-by-one. */
+ uint32_t ExternalTrigConv; /*!< Selects the external event used to trigger the conversion start of regular group.
+ If set to ADC_SOFTWARE_START, external triggers are disabled.
+ This parameter can be a value of @ref ADC_External_trigger_source_Regular */
+ uint32_t ExternalTrigConvEdge; /*!< Selects the external trigger edge of regular group.
+ If trigger is set to ADC_SOFTWARE_START, this parameter is discarded.
+ This parameter can be a value of @ref ADC_External_trigger_edge_Regular */
+ uint32_t DMAContinuousRequests; /*!< Specifies whether the DMA requests are performed in one shot mode (DMA transfer stop when number of conversions is reached)
+ or in Continuous mode (DMA transfer unlimited, whatever number of conversions).
+ Note: In continuous mode, DMA must be configured in circular mode. Otherwise an overrun will be triggered when DMA buffer maximum pointer is reached.
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t Overrun; /*!< Select the behaviour in case of overrun: data preserved or overwritten
+ This parameter has an effect on regular group only, including in DMA mode.
+ This parameter can be a value of @ref ADC_Overrun */
+}ADC_InitTypeDef;
+
+/**
+ * @brief Structure definition of ADC channel for regular group
+ * @note The setting of these parameters with function HAL_ADC_ConfigChannel() is conditioned to ADC state.
+ * ADC state can be either:
+ * - For all parameters: ADC disabled or enabled without conversion on going on regular group.
+ * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed
+ * without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly).
+ */
+typedef struct
+{
+ uint32_t Channel; /*!< Specifies the channel to configure into ADC regular group.
+ This parameter can be a value of @ref ADC_channels
+ Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. */
+ uint32_t Rank; /*!< Add or remove the channel from ADC regular group sequencer.
+ On STM32F0 devices, rank is defined by each channel number (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...).
+ Despite the channel rank is fixed, this parameter allow an additional possibility: to remove the selected rank (selected channel) from sequencer.
+ This parameter can be a value of @ref ADC_rank */
+ uint32_t SamplingTime; /*!< Sampling time value to be set for the selected channel.
+ Unit: ADC clock cycles
+ Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, 8.5 cycles at 8 bits, 6.5 cycles at 6 bits).
+ This parameter can be a value of @ref ADC_sampling_times
+ Caution: this setting impacts the entire regular group. Therefore, call of HAL_ADC_ConfigChannel() to configure a channel can impact the configuration of other channels previously set.
+ Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor),
+ sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
+ Refer to device datasheet for timings values, parameters TS_vrefint, TS_vbat, TS_temp (values rough order: 5us to 17us). */
+}ADC_ChannelConfTypeDef;
+
+/**
+ * @brief Structure definition of ADC analog watchdog
+ * @note The setting of these parameters with function HAL_ADC_AnalogWDGConfig() is conditioned to ADC state.
+ * ADC state can be either: ADC disabled or ADC enabled without conversion on going on regular group.
+ */
+typedef struct
+{
+ uint32_t WatchdogMode; /*!< Configures the ADC analog watchdog mode: single/all/none channels.
+ This parameter can be a value of @ref ADC_analog_watchdog_mode. */
+ uint32_t Channel; /*!< Selects which ADC channel to monitor by analog watchdog.
+ This parameter has an effect only if parameter 'WatchdogMode' is configured on single channel. Only 1 channel can be monitored.
+ This parameter can be a value of @ref ADC_channels. */
+ uint32_t ITMode; /*!< Specifies whether the analog watchdog is configured in interrupt or polling mode.
+ This parameter can be set to ENABLE or DISABLE */
+ uint32_t HighThreshold; /*!< Configures the ADC analog watchdog High threshold value.
+ Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */
+ uint32_t LowThreshold; /*!< Configures the ADC analog watchdog High threshold value.
+ Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */
+}ADC_AnalogWDGConfTypeDef;
+
+/**
+ * @brief HAL ADC state machine: ADC States structure definition
+ */
+typedef enum
+{
+ HAL_ADC_STATE_RESET = 0x00, /*!< ADC not yet initialized or disabled */
+ HAL_ADC_STATE_READY = 0x01, /*!< ADC peripheral ready for use */
+ HAL_ADC_STATE_BUSY = 0x02, /*!< An internal process is ongoing */
+ HAL_ADC_STATE_BUSY_REG = 0x12, /*!< Regular conversion is ongoing */
+ HAL_ADC_STATE_BUSY_INJ = 0x22, /*!< Not used on STM32F0xx devices (kept for compatibility with other devices featuring an injected group) */
+ HAL_ADC_STATE_BUSY_INJ_REG = 0x32, /*!< Not used on STM32F0xx devices (kept for compatibility with other devices featuring an injected group) */
+ HAL_ADC_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_ADC_STATE_ERROR = 0x04, /*!< ADC state error */
+ HAL_ADC_STATE_EOC = 0x05, /*!< Conversion is completed */
+ HAL_ADC_STATE_EOC_REG = 0x15, /*!< Regular conversion is completed */
+ HAL_ADC_STATE_EOC_INJ = 0x25, /*!< Not used on STM32F0xx devices (kept for compatibility with other devices featuring an injected group) */
+ HAL_ADC_STATE_EOC_INJ_REG = 0x35, /*!< Not used on STM32F0xx devices (kept for compatibility with other devices featuring an injected group) */
+ HAL_ADC_STATE_AWD = 0x06, /*!< ADC state analog watchdog */
+ HAL_ADC_STATE_AWD2 = 0x07, /*!< Not used on STM32F0xx devices (kept for compatibility with other devices featuring several AWD) */
+ HAL_ADC_STATE_AWD3 = 0x08, /*!< Not used on STM32F0xx devices (kept for compatibility with other devices featuring several AWD) */
+}HAL_ADC_StateTypeDef;
+
+/**
+ * @brief ADC handle Structure definition
+ */
+typedef struct
+{
+ ADC_TypeDef *Instance; /*!< Register base address */
+
+ ADC_InitTypeDef Init; /*!< ADC required parameters */
+
+ __IO uint32_t NbrOfConversionRank ; /*!< ADC conversion rank counter */
+
+ DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */
+
+ HAL_LockTypeDef Lock; /*!< ADC locking object */
+
+ __IO HAL_ADC_StateTypeDef State; /*!< ADC communication state */
+
+ __IO uint32_t ErrorCode; /*!< ADC Error code */
+}ADC_HandleTypeDef;
+/**
+ * @}
+ */
+
+
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup ADC_Exported_Constants ADC Exported Constants
+ * @{
+ */
+
+/** @defgroup ADC_Error_Code ADC Error Code
+ * @{
+ */
+#define HAL_ADC_ERROR_NONE ((uint32_t)0x00) /*!< No error */
+#define HAL_ADC_ERROR_INTERNAL ((uint32_t)0x01) /*!< ADC IP internal error: if problem of clocking,
+ enable/disable, erroneous state */
+#define HAL_ADC_ERROR_OVR ((uint32_t)0x02) /*!< Overrun error */
+#define HAL_ADC_ERROR_DMA ((uint32_t)0x04) /*!< DMA transfer error */
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_ClockPrescaler ADC ClockPrescaler
+ * @{
+ */
+#define ADC_CLOCK_ASYNC ((uint32_t)0x00000000) /*!< ADC asynchronous clock derived from ADC dedicated HSI */
+
+#define ADC_CLOCK_SYNC_PCLK_DIV2 ((uint32_t)ADC_CFGR2_CKMODE_0) /*!< ADC synchronous clock derived from AHB clock divided by a prescaler of 2 */
+#define ADC_CLOCK_SYNC_PCLK_DIV4 ((uint32_t)ADC_CFGR2_CKMODE_1) /*!< ADC synchronous clock derived from AHB clock divided by a prescaler of 4 */
+
+#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2 /* Obsolete naming, kept for compatibility with some other devices */
+#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4 /* Obsolete naming, kept for compatibility with some other devices */
+
+#define IS_ADC_CLOCKPRESCALER(ADC_CLOCK) (((ADC_CLOCK) == ADC_CLOCK_ASYNC) || \
+ ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV2) || \
+ ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV4) )
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Resolution ADC Resolution
+ * @{
+ */
+#define ADC_RESOLUTION12b ((uint32_t)0x00000000) /*!< ADC 12-bit resolution */
+#define ADC_RESOLUTION10b ((uint32_t)ADC_CFGR1_RES_0) /*!< ADC 10-bit resolution */
+#define ADC_RESOLUTION8b ((uint32_t)ADC_CFGR1_RES_1) /*!< ADC 8-bit resolution */
+#define ADC_RESOLUTION6b ((uint32_t)ADC_CFGR1_RES) /*!< ADC 6-bit resolution */
+
+#define IS_ADC_RESOLUTION(RESOLUTION) (((RESOLUTION) == ADC_RESOLUTION12b) || \
+ ((RESOLUTION) == ADC_RESOLUTION10b) || \
+ ((RESOLUTION) == ADC_RESOLUTION8b) || \
+ ((RESOLUTION) == ADC_RESOLUTION6b) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Data_align ADC Data_align
+ * @{
+ */
+#define ADC_DATAALIGN_RIGHT ((uint32_t)0x00000000)
+#define ADC_DATAALIGN_LEFT ((uint32_t)ADC_CFGR1_ALIGN)
+
+#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DATAALIGN_RIGHT) || \
+ ((ALIGN) == ADC_DATAALIGN_LEFT) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Scan_mode ADC Scan mode
+ * @{
+ */
+/* Note: Scan mode values must be compatible with other STM32 devices having */
+/* a configurable sequencer. */
+/* Scan direction setting values are defined by taking in account */
+/* already defined values for other STM32 devices: */
+/* ADC_SCAN_DISABLE ((uint32_t)0x00000000) */
+/* ADC_SCAN_ENABLE ((uint32_t)0x00000001) */
+/* Scan direction forward is considered as default setting equivalent */
+/* to scan enable. */
+/* Scan direction backward is considered as additional setting. */
+/* In case of migration from another STM32 device, the user will be */
+/* warned of change of setting choices with assert check. */
+#define ADC_SCAN_DIRECTION_FORWARD ((uint32_t)0x00000001) /*!< Scan direction forward: from channel 0 to channel 18 */
+#define ADC_SCAN_DIRECTION_BACKWARD ((uint32_t)0x00000002) /*!< Scan direction backward: from channel 18 to channel 0 */
+
+#define ADC_SCAN_ENABLE ADC_SCAN_DIRECTION_FORWARD /* For compatibility with other STM32 devices */
+
+#define IS_ADC_SCAN_MODE(SCAN_MODE) (((SCAN_MODE) == ADC_SCAN_DIRECTION_FORWARD) || \
+ ((SCAN_MODE) == ADC_SCAN_DIRECTION_BACKWARD) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_External_trigger_edge_Regular ADC External trigger edge Regular
+ * @{
+ */
+#define ADC_EXTERNALTRIGCONVEDGE_NONE ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGCONVEDGE_RISING ((uint32_t)ADC_CFGR1_EXTEN_0)
+#define ADC_EXTERNALTRIGCONVEDGE_FALLING ((uint32_t)ADC_CFGR1_EXTEN_1)
+#define ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING ((uint32_t)ADC_CFGR1_EXTEN)
+
+#define IS_ADC_EXTTRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGCONVEDGE_NONE) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISING) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_FALLING) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_External_trigger_source_Regular ADC External trigger source Regular
+ * @{
+ */
+/* List of external triggers with generic trigger name, sorted by trigger */
+/* name: */
+
+/* External triggers of regular group for ADC1 */
+#define ADC_EXTERNALTRIGCONV_T1_TRGO ADC1_2_EXTERNALTRIG_T1_TRGO
+#define ADC_EXTERNALTRIGCONV_T1_CC4 ADC1_2_EXTERNALTRIG_T1_CC4
+#define ADC_EXTERNALTRIGCONV_T2_TRGO ADC1_2_EXTERNALTRIG_T2_TRGO
+#define ADC_EXTERNALTRIGCONV_T3_TRGO ADC1_2_EXTERNALTRIG_T3_TRGO
+#define ADC_EXTERNALTRIGCONV_T15_TRGO ADC1_2_EXTERNALTRIG_T15_TRGO
+#define ADC_SOFTWARE_START ((uint32_t)0x00000010)
+
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T15_TRGO) || \
+ ((REGTRIG) == ADC_SOFTWARE_START) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Internal_HAL_driver_Ext_trig_src_Regular ADC Internal HAL driver Ext trig src Regular
+ * @{
+ */
+
+/* List of external triggers of regular group for ADC1: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+#define ADC1_2_EXTERNALTRIG_T1_TRGO ((uint32_t)0x00000000)
+#define ADC1_2_EXTERNALTRIG_T1_CC4 ((uint32_t)ADC_CFGR1_EXTSEL_0)
+#define ADC1_2_EXTERNALTRIG_T2_TRGO ((uint32_t)ADC_CFGR1_EXTSEL_1)
+#define ADC1_2_EXTERNALTRIG_T3_TRGO ((uint32_t)(ADC_CFGR1_EXTSEL_1 | ADC_CFGR1_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T15_TRGO ((uint32_t)ADC_CFGR1_EXTSEL_2)
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_EOCSelection ADC EOCSelection
+ * @{
+ */
+#define EOC_SINGLE_CONV ((uint32_t) ADC_ISR_EOC)
+#define EOC_SEQ_CONV ((uint32_t) ADC_ISR_EOS)
+#define EOC_SINGLE_SEQ_CONV ((uint32_t)(ADC_ISR_EOC | ADC_ISR_EOS)) /*!< reserved for future use */
+
+#define IS_ADC_EOC_SELECTION(EOC_SELECTION) (((EOC_SELECTION) == EOC_SINGLE_CONV) || \
+ ((EOC_SELECTION) == EOC_SEQ_CONV) || \
+ ((EOC_SELECTION) == EOC_SINGLE_SEQ_CONV) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Overrun ADC Overrun
+ * @{
+ */
+#define OVR_DATA_OVERWRITTEN ((uint32_t)0x00000000)
+#define OVR_DATA_PRESERVED ((uint32_t)0x00000001)
+
+#define IS_ADC_OVERRUN(OVR) (((OVR) == OVR_DATA_PRESERVED) || \
+ ((OVR) == OVR_DATA_OVERWRITTEN) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_channels ADC channels
+ * @{
+ */
+/* Note: Depending on devices, some channels may not be available on package */
+/* pins. Refer to device datasheet for channels availability. */
+/* Note: Channels are used by bitfields for setting of channel selection */
+/* (register ADC_CHSELR) and used by number for setting of analog watchdog */
+/* channel (bits AWDCH in register ADC_CFGR1). */
+/* Channels are defined with decimal numbers and converted them to bitfields */
+/* when needed. */
+#define ADC_CHANNEL_0 ((uint32_t) 0x00000000)
+#define ADC_CHANNEL_1 ((uint32_t) 0x00000001)
+#define ADC_CHANNEL_2 ((uint32_t) 0x00000002)
+#define ADC_CHANNEL_3 ((uint32_t) 0x00000003)
+#define ADC_CHANNEL_4 ((uint32_t) 0x00000004)
+#define ADC_CHANNEL_5 ((uint32_t) 0x00000005)
+#define ADC_CHANNEL_6 ((uint32_t) 0x00000006)
+#define ADC_CHANNEL_7 ((uint32_t) 0x00000007)
+#define ADC_CHANNEL_8 ((uint32_t) 0x00000008)
+#define ADC_CHANNEL_9 ((uint32_t) 0x00000009)
+#define ADC_CHANNEL_10 ((uint32_t) 0x0000000A)
+#define ADC_CHANNEL_11 ((uint32_t) 0x0000000B)
+#define ADC_CHANNEL_12 ((uint32_t) 0x0000000C)
+#define ADC_CHANNEL_13 ((uint32_t) 0x0000000D)
+#define ADC_CHANNEL_14 ((uint32_t) 0x0000000E)
+#define ADC_CHANNEL_15 ((uint32_t) 0x0000000F)
+#define ADC_CHANNEL_16 ((uint32_t) 0x00000010)
+#define ADC_CHANNEL_17 ((uint32_t) 0x00000011)
+#define ADC_CHANNEL_18 ((uint32_t) 0x00000012)
+
+#define ADC_CHANNEL_TEMPSENSOR ADC_CHANNEL_16
+#define ADC_CHANNEL_VREFINT ADC_CHANNEL_17
+#define ADC_CHANNEL_VBAT ADC_CHANNEL_18
+
+#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_CHANNEL_0) || \
+ ((CHANNEL) == ADC_CHANNEL_1) || \
+ ((CHANNEL) == ADC_CHANNEL_2) || \
+ ((CHANNEL) == ADC_CHANNEL_3) || \
+ ((CHANNEL) == ADC_CHANNEL_4) || \
+ ((CHANNEL) == ADC_CHANNEL_5) || \
+ ((CHANNEL) == ADC_CHANNEL_6) || \
+ ((CHANNEL) == ADC_CHANNEL_7) || \
+ ((CHANNEL) == ADC_CHANNEL_8) || \
+ ((CHANNEL) == ADC_CHANNEL_9) || \
+ ((CHANNEL) == ADC_CHANNEL_10) || \
+ ((CHANNEL) == ADC_CHANNEL_11) || \
+ ((CHANNEL) == ADC_CHANNEL_12) || \
+ ((CHANNEL) == ADC_CHANNEL_13) || \
+ ((CHANNEL) == ADC_CHANNEL_14) || \
+ ((CHANNEL) == ADC_CHANNEL_15) || \
+ ((CHANNEL) == ADC_CHANNEL_TEMPSENSOR) || \
+ ((CHANNEL) == ADC_CHANNEL_VREFINT) || \
+ ((CHANNEL) == ADC_CHANNEL_VBAT) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_rank ADC rank
+ * @{
+ */
+#define ADC_RANK_CHANNEL_NUMBER ((uint32_t)0x00001000) /*!< Enable the rank of the selected channels. Rank is defined by each channel number (channel 0 fixed on rank 0, channel 1 fixed on rank1, ...) */
+#define ADC_RANK_NONE ((uint32_t)0x00001001) /*!< Disable the selected rank (selected channel) from sequencer */
+
+#define IS_ADC_RANK(WATCHDOG) (((WATCHDOG) == ADC_RANK_CHANNEL_NUMBER) || \
+ ((WATCHDOG) == ADC_RANK_NONE) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_sampling_times ADC sampling times
+ * @{
+ */
+#define ADC_SAMPLETIME_1CYCLE_5 ((uint32_t)0x00000000) /*!< Sampling time 1.5 ADC clock cycle */
+#define ADC_SAMPLETIME_7CYCLES_5 ((uint32_t) ADC_SMPR_SMP_0) /*!< Sampling time 7.5 ADC clock cycles */
+#define ADC_SAMPLETIME_13CYCLES_5 ((uint32_t) ADC_SMPR_SMP_1) /*!< Sampling time 13.5 ADC clock cycles */
+#define ADC_SAMPLETIME_28CYCLES_5 ((uint32_t)(ADC_SMPR_SMP_1 | ADC_SMPR_SMP_0)) /*!< Sampling time 28.5 ADC clock cycles */
+#define ADC_SAMPLETIME_41CYCLES_5 ((uint32_t) ADC_SMPR_SMP_2) /*!< Sampling time 41.5 ADC clock cycles */
+#define ADC_SAMPLETIME_55CYCLES_5 ((uint32_t)(ADC_SMPR_SMP_2 | ADC_SMPR_SMP_0)) /*!< Sampling time 55.5 ADC clock cycles */
+#define ADC_SAMPLETIME_71CYCLES_5 ((uint32_t)(ADC_SMPR_SMP_2 | ADC_SMPR_SMP_1)) /*!< Sampling time 71.5 ADC clock cycles */
+#define ADC_SAMPLETIME_239CYCLES_5 ((uint32_t) ADC_SMPR_SMP) /*!< Sampling time 239.5 ADC clock cycles */
+
+#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SAMPLETIME_1CYCLE_5) || \
+ ((TIME) == ADC_SAMPLETIME_7CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_13CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_28CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_41CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_55CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_71CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_239CYCLES_5) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_analog_watchdog_mode ADC analog watchdog mode
+ * @{
+ */
+#define ADC_ANALOGWATCHDOG_NONE ((uint32_t) 0x00000000)
+#define ADC_ANALOGWATCHDOG_SINGLE_REG ((uint32_t)(ADC_CFGR1_AWDSGL | ADC_CFGR1_AWDEN))
+#define ADC_ANALOGWATCHDOG_ALL_REG ((uint32_t) ADC_CFGR1_AWDEN)
+
+
+#define IS_ADC_ANALOG_WATCHDOG_MODE(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_NONE) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REG) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Event_type ADC Event type
+ * @{
+ */
+#define AWD_EVENT ((uint32_t)ADC_FLAG_AWD) /*!< ADC Analog watchdog 1 event */
+#define OVR_EVENT ((uint32_t)ADC_FLAG_OVR) /*!< ADC overrun event */
+
+#define IS_ADC_EVENT_TYPE(EVENT) (((EVENT) == AWD_EVENT) || \
+ ((EVENT) == OVR_EVENT) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_interrupts_definition ADC interrupts definition
+ * @{
+ */
+#define ADC_IT_AWD ADC_IER_AWDIE /*!< ADC Analog watchdog interrupt source */
+#define ADC_IT_OVR ADC_IER_OVRIE /*!< ADC overrun interrupt source */
+#define ADC_IT_EOS ADC_IER_EOSEQIE /*!< ADC End of Regular sequence of Conversions interrupt source */
+#define ADC_IT_EOC ADC_IER_EOCIE /*!< ADC End of Regular Conversion interrupt source */
+#define ADC_IT_EOSMP ADC_IER_EOSMPIE /*!< ADC End of Sampling interrupt source */
+#define ADC_IT_RDY ADC_IER_ADRDYIE /*!< ADC Ready interrupt source */
+/**
+ * @}
+ */
+
+/** @defgroup ADC_flags_definition ADC flags definition
+ * @{
+ */
+#define ADC_FLAG_AWD ADC_ISR_AWD /*!< ADC Analog watchdog flag */
+#define ADC_FLAG_OVR ADC_ISR_OVR /*!< ADC overrun flag */
+#define ADC_FLAG_EOS ADC_ISR_EOSEQ /*!< ADC End of Regular sequence of Conversions flag */
+#define ADC_FLAG_EOC ADC_ISR_EOC /*!< ADC End of Regular Conversion flag */
+#define ADC_FLAG_EOSMP ADC_ISR_EOSMP /*!< ADC End of Sampling flag */
+#define ADC_FLAG_RDY ADC_ISR_ADRDY /*!< ADC Ready flag */
+
+#define ADC_FLAG_ALL (ADC_FLAG_AWD | ADC_FLAG_OVR | ADC_FLAG_EOS | ADC_FLAG_EOC | \
+ ADC_FLAG_EOSMP | ADC_FLAG_RDY )
+
+/* Combination of all post-conversion flags bits: EOC/EOS, OVR, AWD */
+#define ADC_FLAG_POSTCONV_ALL (ADC_FLAG_AWD | ADC_FLAG_OVR | ADC_FLAG_EOS | ADC_FLAG_EOC)
+/**
+ * @}
+ */
+
+/** @defgroup ADC_range_verification ADC range verification
+ * in function of ADC resolution selected (12, 10, 8 or 6 bits)
+ * @{
+ */
+#define IS_ADC_RANGE(RESOLUTION, ADC_VALUE) \
+ ((((RESOLUTION) == ADC_RESOLUTION12b) && ((ADC_VALUE) <= ((uint32_t)0x0FFF))) || \
+ (((RESOLUTION) == ADC_RESOLUTION10b) && ((ADC_VALUE) <= ((uint32_t)0x03FF))) || \
+ (((RESOLUTION) == ADC_RESOLUTION8b) && ((ADC_VALUE) <= ((uint32_t)0x00FF))) || \
+ (((RESOLUTION) == ADC_RESOLUTION6b) && ((ADC_VALUE) <= ((uint32_t)0x003F))) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_regular_rank_verification ADC regular rank verification
+ * @{
+ */
+#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= ((uint32_t)1)) && ((RANK) <= ((uint32_t)16)))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup ADC_Exported_Macros ADC Exported Macros
+ * @{
+ */
+/** @brief Reset ADC handle state
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_ADC_STATE_RESET)
+
+/* Macro for internal HAL driver usage, and possibly can be used into code of */
+/* final user. */
+
+/**
+ * @brief Verification of ADC state: enabled or disabled
+ * @param __HANDLE__: ADC handle
+ * @retval SET (ADC enabled) or RESET (ADC disabled)
+ */
+/* Note: If low power mode AutoPowerOff is enabled, power-on/off phases are */
+/* performed automatically by hardware and flag ADC_FLAG_RDY is not */
+/* set. */
+#define __HAL_ADC_IS_ENABLED(__HANDLE__) \
+ (( ((((__HANDLE__)->Instance->CR) & (ADC_CR_ADEN | ADC_CR_ADDIS)) == ADC_CR_ADEN) && \
+ (((((__HANDLE__)->Instance->ISR) & ADC_FLAG_RDY) == ADC_FLAG_RDY) || \
+ ((((__HANDLE__)->Instance->CFGR1) & ADC_CFGR1_AUTOFF) == ADC_CFGR1_AUTOFF) ) \
+ ) ? SET : RESET)
+
+/**
+ * @brief Test if conversion trigger of regular group is software start
+ * or external trigger.
+ * @param __HANDLE__: ADC handle
+ * @retval SET (software start) or RESET (external trigger)
+ */
+#define __HAL_ADC_IS_SOFTWARE_START_REGULAR(__HANDLE__) \
+ (((__HANDLE__)->Instance->CFGR1 & ADC_CFGR1_EXTEN) == RESET)
+
+/**
+ * @brief Check if no conversion on going on regular group
+ * @param __HANDLE__: ADC handle
+ * @retval SET (conversion is on going) or RESET (no conversion is on going)
+ */
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR(__HANDLE__) \
+ (( (((__HANDLE__)->Instance->CR) & ADC_CR_ADSTART) == RESET \
+ ) ? RESET : SET)
+
+/**
+ * @brief Returns resolution bits in CFGR1 register: RES[1:0].
+ * Returned value is among parameters to @ref ADC_Resolution.
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_GET_RESOLUTION(__HANDLE__) (((__HANDLE__)->Instance->CFGR1) & ADC_CFGR1_RES)
+
+/**
+ * @brief Returns ADC sample time bits in SMPR register: SMP[2:0].
+ * Returned value is among parameters to @ref ADC_Resolution.
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_GET_SAMPLINGTIME(__HANDLE__) (((__HANDLE__)->Instance->SMPR) & ADC_SMPR_SMP)
+
+/** @brief Checks if the specified ADC interrupt source is enabled or disabled.
+ * @param __HANDLE__: ADC handle
+ * @param __INTERRUPT__: ADC interrupt source to check
+ * @retval State ofinterruption (SET or RESET)
+ */
+#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \
+ (( ((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__) \
+ )? SET : RESET \
+ )
+
+/**
+ * @brief Enable the ADC end of conversion interrupt.
+ * @param __HANDLE__: ADC handle
+ * @param __INTERRUPT__: ADC Interrupt
+ * @retval None
+ */
+#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the ADC end of conversion interrupt.
+ * @param __HANDLE__: ADC handle
+ * @param __INTERRUPT__: ADC Interrupt
+ * @retval None
+ */
+#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__))
+
+/**
+ * @brief Get the selected ADC's flag status.
+ * @param __HANDLE__: ADC handle
+ * @param __FLAG__: ADC flag
+ * @retval None
+ */
+#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear the ADC's pending flags
+ * @param __HANDLE__: ADC handle
+ * @param __FLAG__: ADC flag
+ * @retval None
+ */
+/* Note: bit cleared bit by writing 1 (writing 0 has no effect on any bit of register ISR) */
+#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR) = (__FLAG__))
+
+/**
+ * @brief Clear ADC error code (set it to error code: "no error")
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_CLEAR_ERRORCODE(__HANDLE__) ((__HANDLE__)->ErrorCode = HAL_ADC_ERROR_NONE)
+
+
+/**
+ * @brief Configure the channel number into channel selection register
+ * @param _CHANNEL_: ADC Channel
+ * @retval None
+ */
+/* This function converts ADC channels from numbers (see defgroup ADC_channels)
+ to bitfields, to get the equivalence of CMSIS channels:
+ ADC_CHANNEL_0 ((uint32_t) ADC_CHSELR_CHSEL0)
+ ADC_CHANNEL_1 ((uint32_t) ADC_CHSELR_CHSEL1)
+ ADC_CHANNEL_2 ((uint32_t) ADC_CHSELR_CHSEL2)
+ ADC_CHANNEL_3 ((uint32_t) ADC_CHSELR_CHSEL3)
+ ADC_CHANNEL_4 ((uint32_t) ADC_CHSELR_CHSEL4)
+ ADC_CHANNEL_5 ((uint32_t) ADC_CHSELR_CHSEL5)
+ ADC_CHANNEL_6 ((uint32_t) ADC_CHSELR_CHSEL6)
+ ADC_CHANNEL_7 ((uint32_t) ADC_CHSELR_CHSEL7)
+ ADC_CHANNEL_8 ((uint32_t) ADC_CHSELR_CHSEL8)
+ ADC_CHANNEL_9 ((uint32_t) ADC_CHSELR_CHSEL9)
+ ADC_CHANNEL_10 ((uint32_t) ADC_CHSELR_CHSEL10)
+ ADC_CHANNEL_11 ((uint32_t) ADC_CHSELR_CHSEL11)
+ ADC_CHANNEL_12 ((uint32_t) ADC_CHSELR_CHSEL12)
+ ADC_CHANNEL_13 ((uint32_t) ADC_CHSELR_CHSEL13)
+ ADC_CHANNEL_14 ((uint32_t) ADC_CHSELR_CHSEL14)
+ ADC_CHANNEL_15 ((uint32_t) ADC_CHSELR_CHSEL15)
+ ADC_CHANNEL_16 ((uint32_t) ADC_CHSELR_CHSEL16)
+ ADC_CHANNEL_17 ((uint32_t) ADC_CHSELR_CHSEL17)
+ ADC_CHANNEL_18 ((uint32_t) ADC_CHSELR_CHSEL18)
+*/
+#define __HAL_ADC_CHSELR_CHANNEL(_CHANNEL_) ( 1U << (_CHANNEL_))
+
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Exported_Macro_internal_HAL_driver ADC Exported Macro internal HAL driver
+ * @{
+ */
+/* Macro reserved for internal HAL driver usage, not intended to be used in */
+/* code of final user. */
+
+/**
+ * @brief Set the Analog Watchdog 1 channel.
+ * @param _CHANNEL_: channel to be monitored by Analog Watchdog 1.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR_AWDCH(_CHANNEL_) ((_CHANNEL_) << 26)
+
+/**
+ * @brief Enable ADC discontinuous conversion mode for regular group
+ * @param _REG_DISCONTINUOUS_MODE_: Regular discontinuous mode.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS(_REG_DISCONTINUOUS_MODE_) ((_REG_DISCONTINUOUS_MODE_) << 16)
+
+/**
+ * @brief Enable the ADC auto off mode.
+ * @param _AUTOOFF_: Auto off bit enable or disable.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR1_AUTOOFF(_AUTOOFF_) ((_AUTOOFF_) << 15)
+
+/**
+ * @brief Enable the ADC auto delay mode.
+ * @param _AUTOWAIT_: Auto delay bit enable or disable.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR1_AUTOWAIT(_AUTOWAIT_) ((_AUTOWAIT_) << 14)
+
+/**
+ * @brief Enable ADC continuous conversion mode.
+ * @param _CONTINUOUS_MODE_: Continuous mode.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR1_CONTINUOUS(_CONTINUOUS_MODE_) ((_CONTINUOUS_MODE_) << 13)
+
+/**
+ * @brief Enable ADC overrun mode.
+ * @param _OVERRUN_MODE_: Overrun mode.
+ * @retval Overun bit setting to be programmed into CFGR register
+ */
+/* Note: Bit ADC_CFGR1_OVRMOD not used directly in constant */
+/* "OVR_DATA_OVERWRITTEN" to have this case defined to 0x00, to set it as the */
+/* default case to be compliant with other STM32 devices. */
+#define __HAL_ADC_CFGR1_OVERRUN(_OVERRUN_MODE_) \
+ ( ( (_OVERRUN_MODE_) != (OVR_DATA_PRESERVED) \
+ )? (ADC_CFGR1_OVRMOD) : (0x00000000) \
+ )
+
+/**
+ * @brief Enable ADC scan mode to convert multiple ranks with sequencer.
+ * @param _SCAN_MODE_: Scan conversion mode.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR1_SCANDIR(_SCAN_MODE_) \
+ ( ( (_SCAN_MODE_) == (ADC_SCAN_DIRECTION_BACKWARD) \
+ )? (ADC_CFGR1_SCANDIR) : (0x00000000) \
+ )
+
+/**
+ * @brief Enable the ADC DMA continuous request.
+ * @param _DMACONTREQ_MODE_: DMA continuous request mode.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR1_DMACONTREQ(_DMACONTREQ_MODE_) ((_DMACONTREQ_MODE_) << 1)
+
+/**
+ * @brief Configure the analog watchdog high threshold into register TR.
+ * @param _Threshold_: Threshold value
+ * @retval None
+ */
+#define __HAL_ADC_TRX_HIGHTHRESHOLD(_Threshold_) ((_Threshold_) << 16)
+
+/**
+ * @brief Enable the ADC peripheral
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= ADC_CR_ADEN)
+
+/**
+ * @brief Verification of hardware constraints before ADC can be enabled
+ * @param __HANDLE__: ADC handle
+ * @retval SET (ADC can be enabled) or RESET (ADC cannot be enabled)
+ */
+#define __HAL_ADC_ENABLING_CONDITIONS(__HANDLE__) \
+ (( ( ((__HANDLE__)->Instance->CR) & \
+ (ADC_CR_ADCAL | ADC_CR_ADSTP | \
+ ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN ) \
+ ) == RESET \
+ ) ? SET : RESET)
+
+/**
+ * @brief Disable the ADC peripheral
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_DISABLE(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Instance->CR |= ADC_CR_ADDIS; \
+ __HAL_ADC_CLEAR_FLAG((__HANDLE__), (ADC_FLAG_EOSMP | ADC_FLAG_RDY)); \
+ } while(0)
+
+/**
+ * @brief Verification of hardware constraints before ADC can be disabled
+ * @param __HANDLE__: ADC handle
+ * @retval SET (ADC can be disabled) or RESET (ADC cannot be disabled)
+ */
+#define __HAL_ADC_DISABLING_CONDITIONS(__HANDLE__) \
+ (( ( ((__HANDLE__)->Instance->CR) & \
+ (ADC_CR_ADSTART | ADC_CR_ADEN)) == ADC_CR_ADEN \
+ ) ? SET : RESET)
+
+/**
+ * @brief Shift the AWD threshold in function of the selected ADC resolution.
+ * Thresholds have to be left-aligned on bit 11, the LSB (right bits) are set to 0.
+ * If resolution 12 bits, no shift.
+ * If resolution 10 bits, shift of 2 ranks on the left.
+ * If resolution 8 bits, shift of 4 ranks on the left.
+ * If resolution 6 bits, shift of 6 ranks on the left.
+ * therefore, shift = (12 - resolution) = 12 - (12- (((RES[1:0]) >> 3)*2))
+ * @param __HANDLE__: ADC handle
+ * @param _Threshold_: Value to be shifted
+ * @retval None
+ */
+#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(__HANDLE__, _Threshold_) \
+ ((_Threshold_) << ((((__HANDLE__)->Instance->CFGR1 & ADC_CFGR1_RES) >> 3)*2))
+
+/**
+ * @}
+ */
+
+/* Include ADC HAL Extension module */
+#include "stm32f0xx_hal_adc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup ADC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup ADC_Exported_Functions_Group1
+ * @{
+ */
+
+
+/* Initialization and de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc);
+void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc);
+void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc);
+/**
+ * @}
+ */
+
+/* IO operation functions *****************************************************/
+
+/** @addtogroup ADC_Exported_Functions_Group2
+ * @{
+ */
+
+
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout);
+
+/* Non-blocking mode: Interruption */
+HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc);
+
+/* Non-blocking mode: DMA */
+HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);
+HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc);
+
+/* ADC retrieve conversion value intended to be used with polling or interruption */
+uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc);
+
+/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption and DMA) */
+void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc);
+/**
+ * @}
+ */
+
+
+/* Peripheral Control functions ***********************************************/
+/** @addtogroup ADC_Exported_Functions_Group3
+ * @{
+ */
+HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig);
+HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig);
+/**
+ * @}
+ */
+
+
+/* Peripheral State functions *************************************************/
+/** @addtogroup ADC_Exported_Functions_Group4
+ * @{
+ */
+HAL_ADC_StateTypeDef HAL_ADC_GetState(ADC_HandleTypeDef* hadc);
+uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc);
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F0xx_HAL_ADC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_adc_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,98 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_adc_ex.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of ADC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_ADC_EX_H
+#define __STM32F0xx_HAL_ADC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup ADCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup ADCEx_Exported_Functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+/** @addtogroup ADCEx_Exported_Functions_Group1
+ * @{
+ */
+
+/* ADC calibration */
+HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef* hadc);
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_ADC_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_can.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,810 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_can.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of CAN HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_CAN_H
+#define __STM32F0xx_HAL_CAN_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F072xB) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CAN CAN HAL Module Driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CAN_Exported_Types CAN Exported Types
+ * @{
+ */
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_CAN_STATE_RESET = 0x00, /*!< CAN not yet initialized or disabled */
+ HAL_CAN_STATE_READY = 0x01, /*!< CAN initialized and ready for use */
+ HAL_CAN_STATE_BUSY = 0x02, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_TX = 0x12, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_RX = 0x22, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_TX_RX = 0x32, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_TIMEOUT = 0x03, /*!< CAN in Timeout state */
+ HAL_CAN_STATE_ERROR = 0x04 /*!< CAN error state */
+
+}HAL_CAN_StateTypeDef;
+
+/**
+ * @brief CAN init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the length of a time quantum.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 1024. */
+
+ uint32_t Mode; /*!< Specifies the CAN operating mode.
+ This parameter can be a value of @ref CAN_operating_mode */
+
+ uint32_t SJW; /*!< Specifies the maximum number of time quanta
+ the CAN hardware is allowed to lengthen or
+ shorten a bit to perform resynchronization.
+ This parameter can be a value of @ref CAN_synchronisation_jump_width */
+
+ uint32_t BS1; /*!< Specifies the number of time quanta in Bit Segment 1.
+ This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */
+
+ uint32_t BS2; /*!< Specifies the number of time quanta in Bit Segment 2.
+ This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */
+
+ uint32_t TTCM; /*!< Enable or disable the time triggered communication mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t ABOM; /*!< Enable or disable the automatic bus-off management.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t AWUM; /*!< Enable or disable the automatic wake-up mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t NART; /*!< Enable or disable the non-automatic retransmission mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t RFLM; /*!< Enable or disable the Receive FIFO Locked mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t TXFP; /*!< Enable or disable the transmit FIFO priority.
+ This parameter can be set to ENABLE or DISABLE. */
+}CAN_InitTypeDef;
+
+/**
+ * @brief CAN filter configuration structure definition
+ */
+typedef struct
+{
+ uint32_t FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit
+ configuration, first one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit
+ configuration, second one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number,
+ according to the mode (MSBs for a 32-bit configuration,
+ first one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t FilterMaskIdLow; /*!< Specifies the filter mask number or identification number,
+ according to the mode (LSBs for a 32-bit configuration,
+ second one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter.
+ This parameter can be a value of @ref CAN_filter_FIFO */
+
+ uint32_t FilterNumber; /*!< Specifies the filter which will be initialized.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 27. */
+
+ uint32_t FilterMode; /*!< Specifies the filter mode to be initialized.
+ This parameter can be a value of @ref CAN_filter_mode */
+
+ uint32_t FilterScale; /*!< Specifies the filter scale.
+ This parameter can be a value of @ref CAN_filter_scale */
+
+ uint32_t FilterActivation; /*!< Enable or disable the filter.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t BankNumber; /*!< Select the start slave bank filter
+ This parameter must be a number between Min_Data = 0 and Max_Data = 28. */
+
+}CAN_FilterConfTypeDef;
+
+/**
+ * @brief CAN Tx message structure definition
+ */
+typedef struct
+{
+ uint32_t StdId; /*!< Specifies the standard identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF. */
+
+ uint32_t ExtId; /*!< Specifies the extended identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF. */
+
+ uint32_t IDE; /*!< Specifies the type of identifier for the message that will be transmitted.
+ This parameter can be a value of @ref CAN_identifier_type */
+
+ uint32_t RTR; /*!< Specifies the type of frame for the message that will be transmitted.
+ This parameter can be a value of @ref CAN_remote_transmission_request */
+
+ uint32_t DLC; /*!< Specifies the length of the frame that will be transmitted.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 8. */
+
+ uint32_t Data[8]; /*!< Contains the data to be transmitted.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF. */
+
+}CanTxMsgTypeDef;
+
+/**
+ * @brief CAN Rx message structure definition
+ */
+typedef struct
+{
+ uint32_t StdId; /*!< Specifies the standard identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF. */
+
+ uint32_t ExtId; /*!< Specifies the extended identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF. */
+
+ uint32_t IDE; /*!< Specifies the type of identifier for the message that will be received.
+ This parameter can be a value of @ref CAN_identifier_type */
+
+ uint32_t RTR; /*!< Specifies the type of frame for the received message.
+ This parameter can be a value of @ref CAN_remote_transmission_request */
+
+ uint32_t DLC; /*!< Specifies the length of the frame that will be received.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 8. */
+
+ uint32_t Data[8]; /*!< Contains the data to be received.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF. */
+
+ uint32_t FMI; /*!< Specifies the index of the filter the message stored in the mailbox passes through.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF. */
+
+ uint32_t FIFONumber; /*!< Specifies the receive FIFO number.
+ This parameter can be CAN_FIFO0 or CAN_FIFO1 */
+
+}CanRxMsgTypeDef;
+
+/**
+ * @brief CAN handle Structure definition
+ */
+typedef struct
+{
+ CAN_TypeDef *Instance; /*!< Register base address */
+
+ CAN_InitTypeDef Init; /*!< CAN required parameters */
+
+ CanTxMsgTypeDef* pTxMsg; /*!< Pointer to transmit structure */
+
+ CanRxMsgTypeDef* pRxMsg; /*!< Pointer to reception structure */
+
+ HAL_LockTypeDef Lock; /*!< CAN locking object */
+
+ __IO HAL_CAN_StateTypeDef State; /*!< CAN communication state */
+
+ __IO uint32_t ErrorCode; /*!< CAN Error code
+ This parameter can be a value of @ref CAN_Error */
+
+}CAN_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CAN_Exported_Constants CAN Exported Constants
+ * @{
+ */
+
+/** @defgroup CAN_Error CAN Error
+ * @{
+ */
+#define HAL_CAN_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_CAN_ERROR_EWG ((uint32_t)0x00000001) /*!< EWG error */
+#define HAL_CAN_ERROR_EPV ((uint32_t)0x00000002) /*!< EPV error */
+#define HAL_CAN_ERROR_BOF ((uint32_t)0x00000004) /*!< BOF error */
+#define HAL_CAN_ERROR_STF ((uint32_t)0x00000008) /*!< Stuff error */
+#define HAL_CAN_ERROR_FOR ((uint32_t)0x00000010) /*!< Form error */
+#define HAL_CAN_ERROR_ACK ((uint32_t)0x00000020) /*!< Acknowledgment error */
+#define HAL_CAN_ERROR_BR ((uint32_t)0x00000040) /*!< Bit recessive */
+#define HAL_CAN_ERROR_BD ((uint32_t)0x00000080) /*!< LEC dominant */
+#define HAL_CAN_ERROR_CRC ((uint32_t)0x00000100) /*!< LEC transfer error */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_InitStatus CAN InitStatus
+ * @{
+ */
+#define CAN_INITSTATUS_FAILED ((uint32_t)0x00000000) /*!< CAN initialization failed */
+#define CAN_INITSTATUS_SUCCESS ((uint32_t)0x00000001) /*!< CAN initialization OK */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_operating_mode CAN operating mode
+ * @{
+ */
+#define CAN_MODE_NORMAL ((uint32_t)0x00000000) /*!< Normal mode */
+#define CAN_MODE_LOOPBACK ((uint32_t)CAN_BTR_LBKM) /*!< Loopback mode */
+#define CAN_MODE_SILENT ((uint32_t)CAN_BTR_SILM) /*!< Silent mode */
+#define CAN_MODE_SILENT_LOOPBACK ((uint32_t)(CAN_BTR_LBKM | CAN_BTR_SILM)) /*!< Loopback combined with silent mode */
+
+#define IS_CAN_MODE(MODE) (((MODE) == CAN_MODE_NORMAL) || \
+ ((MODE) == CAN_MODE_LOOPBACK)|| \
+ ((MODE) == CAN_MODE_SILENT) || \
+ ((MODE) == CAN_MODE_SILENT_LOOPBACK))
+/**
+ * @}
+ */
+
+
+/** @defgroup CAN_synchronisation_jump_width CAN synchronisation jump width
+ * @{
+ */
+#define CAN_SJW_1TQ ((uint32_t)0x00000000) /*!< 1 time quantum */
+#define CAN_SJW_2TQ ((uint32_t)CAN_BTR_SJW_0) /*!< 2 time quantum */
+#define CAN_SJW_3TQ ((uint32_t)CAN_BTR_SJW_1) /*!< 3 time quantum */
+#define CAN_SJW_4TQ ((uint32_t)CAN_BTR_SJW) /*!< 4 time quantum */
+
+#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ)|| \
+ ((SJW) == CAN_SJW_3TQ) || ((SJW) == CAN_SJW_4TQ))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_1 CAN time quantum in bit segment 1
+ * @{
+ */
+#define CAN_BS1_1TQ ((uint32_t)0x00000000) /*!< 1 time quantum */
+#define CAN_BS1_2TQ ((uint32_t)CAN_BTR_TS1_0) /*!< 2 time quantum */
+#define CAN_BS1_3TQ ((uint32_t)CAN_BTR_TS1_1) /*!< 3 time quantum */
+#define CAN_BS1_4TQ ((uint32_t)(CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 4 time quantum */
+#define CAN_BS1_5TQ ((uint32_t)CAN_BTR_TS1_2) /*!< 5 time quantum */
+#define CAN_BS1_6TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 6 time quantum */
+#define CAN_BS1_7TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 7 time quantum */
+#define CAN_BS1_8TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 8 time quantum */
+#define CAN_BS1_9TQ ((uint32_t)CAN_BTR_TS1_3) /*!< 9 time quantum */
+#define CAN_BS1_10TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_0)) /*!< 10 time quantum */
+#define CAN_BS1_11TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1)) /*!< 11 time quantum */
+#define CAN_BS1_12TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 12 time quantum */
+#define CAN_BS1_13TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2)) /*!< 13 time quantum */
+#define CAN_BS1_14TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 14 time quantum */
+#define CAN_BS1_15TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 15 time quantum */
+#define CAN_BS1_16TQ ((uint32_t)CAN_BTR_TS1) /*!< 16 time quantum */
+
+#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16TQ)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_2 CAN time quantum in bit segment 2
+ * @{
+ */
+#define CAN_BS2_1TQ ((uint32_t)0x00000000) /*!< 1 time quantum */
+#define CAN_BS2_2TQ ((uint32_t)CAN_BTR_TS2_0) /*!< 2 time quantum */
+#define CAN_BS2_3TQ ((uint32_t)CAN_BTR_TS2_1) /*!< 3 time quantum */
+#define CAN_BS2_4TQ ((uint32_t)(CAN_BTR_TS2_1 | CAN_BTR_TS2_0)) /*!< 4 time quantum */
+#define CAN_BS2_5TQ ((uint32_t)CAN_BTR_TS2_2) /*!< 5 time quantum */
+#define CAN_BS2_6TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_0)) /*!< 6 time quantum */
+#define CAN_BS2_7TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_1)) /*!< 7 time quantum */
+#define CAN_BS2_8TQ ((uint32_t)CAN_BTR_TS2) /*!< 8 time quantum */
+
+#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8TQ)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_clock_prescaler CAN clock prescaler
+ * @{
+ */
+#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_number CAN filter number
+ * @{
+ */
+#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_mode CAN filter mode
+ * @{
+ */
+#define CAN_FILTERMODE_IDMASK ((uint8_t)0x00) /*!< Identifier mask mode */
+#define CAN_FILTERMODE_IDLIST ((uint8_t)0x01) /*!< Identifier list mode */
+
+#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \
+ ((MODE) == CAN_FILTERMODE_IDLIST))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_scale CAN filter scale
+ * @{
+ */
+#define CAN_FILTERSCALE_16BIT ((uint8_t)0x00) /*!< Two 16-bit filters */
+#define CAN_FILTERSCALE_32BIT ((uint8_t)0x01) /*!< One 32-bit filter */
+
+#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \
+ ((SCALE) == CAN_FILTERSCALE_32BIT))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_FIFO CAN filter FIFO
+ * @{
+ */
+#define CAN_FILTER_FIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */
+#define CAN_FILTER_FIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */
+
+#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FILTER_FIFO0) || \
+ ((FIFO) == CAN_FILTER_FIFO1))
+
+/* Legacy defines */
+#define CAN_FilterFIFO0 CAN_FILTER_FIFO0
+#define CAN_FilterFIFO1 CAN_FILTER_FIFO1
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Start_bank_filter_for_slave_CAN CAN Start bank filter for slave CAN
+ * @{
+ */
+#define IS_CAN_BANKNUMBER(BANKNUMBER) ((BANKNUMBER) <= 28)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Tx CAN Tx
+ * @{
+ */
+#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02))
+#define IS_CAN_STDID(STDID) ((STDID) <= ((uint32_t)0x7FF))
+#define IS_CAN_EXTID(EXTID) ((EXTID) <= ((uint32_t)0x1FFFFFFF))
+#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_identifier_type CAN identifier type
+ * @{
+ */
+#define CAN_ID_STD ((uint32_t)0x00000000) /*!< Standard Id */
+#define CAN_ID_EXT ((uint32_t)0x00000004) /*!< Extended Id */
+#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_ID_STD) || \
+ ((IDTYPE) == CAN_ID_EXT))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_remote_transmission_request CAN remote transmission request
+ * @{
+ */
+#define CAN_RTR_DATA ((uint32_t)0x00000000) /*!< Data frame */
+#define CAN_RTR_REMOTE ((uint32_t)0x00000002) /*!< Remote frame */
+#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE))
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_transmit_constants CAN transmit constants
+ * @{
+ */
+#define CAN_TXSTATUS_FAILED ((uint8_t)0x00) /*!< CAN transmission failed */
+#define CAN_TXSTATUS_OK ((uint8_t)0x01) /*!< CAN transmission succeeded */
+#define CAN_TXSTATUS_PENDING ((uint8_t)0x02) /*!< CAN transmission pending */
+#define CAN_TXSTATUS_NOMAILBOX ((uint8_t)0x04) /*!< CAN cell did not provide CAN_TxStatus_NoMailBox */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_receive_FIFO_number_constants CAN receive FIFO number constants
+ * @{
+ */
+#define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */
+#define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */
+
+#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_flags CAN flags
+ * @{
+ */
+/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus()
+ and CAN_ClearFlag() functions. */
+/* If the flag is 0x1XXXXXXX, it means that it can only be used with
+ CAN_GetFlagStatus() function. */
+
+/* Transmit Flags */
+#define CAN_FLAG_RQCP0 ((uint32_t)0x00000500) /*!< Request MailBox0 flag */
+#define CAN_FLAG_RQCP1 ((uint32_t)0x00000508) /*!< Request MailBox1 flag */
+#define CAN_FLAG_RQCP2 ((uint32_t)0x00000510) /*!< Request MailBox2 flag */
+#define CAN_FLAG_TXOK0 ((uint32_t)0x00000501) /*!< Transmission OK MailBox0 flag */
+#define CAN_FLAG_TXOK1 ((uint32_t)0x00000509) /*!< Transmission OK MailBox1 flag */
+#define CAN_FLAG_TXOK2 ((uint32_t)0x00000511) /*!< Transmission OK MailBox2 flag */
+#define CAN_FLAG_TME0 ((uint32_t)0x0000051A) /*!< Transmit mailbox 0 empty flag */
+#define CAN_FLAG_TME1 ((uint32_t)0x0000051B) /*!< Transmit mailbox 0 empty flag */
+#define CAN_FLAG_TME2 ((uint32_t)0x0000051C) /*!< Transmit mailbox 0 empty flag */
+
+/* Receive Flags */
+#define CAN_FLAG_FF0 ((uint32_t)0x00000203) /*!< FIFO 0 Full flag */
+#define CAN_FLAG_FOV0 ((uint32_t)0x00000204) /*!< FIFO 0 Overrun flag */
+
+#define CAN_FLAG_FF1 ((uint32_t)0x00000403) /*!< FIFO 1 Full flag */
+#define CAN_FLAG_FOV1 ((uint32_t)0x00000404) /*!< FIFO 1 Overrun flag */
+
+/* Operating Mode Flags */
+#define CAN_FLAG_WKU ((uint32_t)0x00000103) /*!< Wake up flag */
+#define CAN_FLAG_SLAK ((uint32_t)0x00000101) /*!< Sleep acknowledge flag */
+#define CAN_FLAG_SLAKI ((uint32_t)0x00000104) /*!< Sleep acknowledge flag */
+/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible.
+ In this case the SLAK bit can be polled.*/
+
+/* Error Flags */
+#define CAN_FLAG_EWG ((uint32_t)0x00000300) /*!< Error warning flag */
+#define CAN_FLAG_EPV ((uint32_t)0x00000301) /*!< Error passive flag */
+#define CAN_FLAG_BOF ((uint32_t)0x00000302) /*!< Bus-Off flag */
+/**
+ * @}
+ */
+
+
+/** @defgroup CAN_interrupts CAN interrupts
+ * @{
+ */
+#define CAN_IT_TME ((uint32_t)CAN_IER_TMEIE) /*!< Transmit mailbox empty interrupt */
+
+/* Receive Interrupts */
+#define CAN_IT_FMP0 ((uint32_t)CAN_IER_FMPIE0) /*!< FIFO 0 message pending interrupt */
+#define CAN_IT_FF0 ((uint32_t)CAN_IER_FFIE0) /*!< FIFO 0 full interrupt */
+#define CAN_IT_FOV0 ((uint32_t)CAN_IER_FOVIE0) /*!< FIFO 0 overrun interrupt */
+#define CAN_IT_FMP1 ((uint32_t)CAN_IER_FMPIE1) /*!< FIFO 1 message pending interrupt */
+#define CAN_IT_FF1 ((uint32_t)CAN_IER_FFIE1) /*!< FIFO 1 full interrupt */
+#define CAN_IT_FOV1 ((uint32_t)CAN_IER_FOVIE1) /*!< FIFO 1 overrun interrupt */
+
+/* Operating Mode Interrupts */
+#define CAN_IT_WKU ((uint32_t)CAN_IER_WKUIE) /*!< Wake-up interrupt */
+#define CAN_IT_SLK ((uint32_t)CAN_IER_SLKIE) /*!< Sleep acknowledge interrupt */
+
+/* Error Interrupts */
+#define CAN_IT_EWG ((uint32_t)CAN_IER_EWGIE) /*!< Error warning interrupt */
+#define CAN_IT_EPV ((uint32_t)CAN_IER_EPVIE) /*!< Error passive interrupt */
+#define CAN_IT_BOF ((uint32_t)CAN_IER_BOFIE) /*!< Bus-off interrupt */
+#define CAN_IT_LEC ((uint32_t)CAN_IER_LECIE) /*!< Last error code interrupt */
+#define CAN_IT_ERR ((uint32_t)CAN_IER_ERRIE) /*!< Error Interrupt */
+
+/* Flags named as Interrupts : kept only for FW compatibility */
+#define CAN_IT_RQCP0 CAN_IT_TME
+#define CAN_IT_RQCP1 CAN_IT_TME
+#define CAN_IT_RQCP2 CAN_IT_TME
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Timeouts CAN Timeouts
+* @{
+*/
+
+/* Time out for INAK bit */
+#define INAK_TIMEOUT ((uint32_t)0x00FFFFFF)
+/* Time out for SLAK bit */
+#define SLAK_TIMEOUT ((uint32_t)0x00FFFFFF)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Mailboxes CAN Mailboxes
+* @{
+*/
+/* Mailboxes definition */
+#define CAN_TXMAILBOX_0 ((uint8_t)0x00)
+#define CAN_TXMAILBOX_1 ((uint8_t)0x01)
+#define CAN_TXMAILBOX_2 ((uint8_t)0x02)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup CAN_Exported_Macros CAN Exported Macros
+ * @{
+ */
+
+/** @brief Reset CAN handle state
+ * @param __HANDLE__: CAN handle.
+ * @retval None
+ */
+#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CAN_STATE_RESET)
+
+/**
+ * @brief Enable the specified CAN interrupts.
+ * @param __HANDLE__: CAN handle.
+ * @param __INTERRUPT__: CAN Interrupt
+ * @retval None
+ */
+#define __HAL_CAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified CAN interrupts.
+ * @param __HANDLE__: CAN handle.
+ * @param __INTERRUPT__: CAN Interrupt
+ * @retval None
+ */
+#define __HAL_CAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__))
+
+/**
+ * @brief Return the number of pending received messages.
+ * @param __HANDLE__: CAN handle.
+ * @param __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+ * @retval The number of pending message.
+ */
+#define __HAL_CAN_MSG_PENDING(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
+((uint8_t)((__HANDLE__)->Instance->RF0R&(uint32_t)0x03)) : ((uint8_t)((__HANDLE__)->Instance->RF1R&(uint32_t)0x03)))
+
+/** @brief Check whether the specified CAN flag is set or not.
+ * @param __HANDLE__: specifies the CAN Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_TSR_RQCP0: Request MailBox0 Flag
+ * @arg CAN_TSR_RQCP1: Request MailBox1 Flag
+ * @arg CAN_TSR_RQCP2: Request MailBox2 Flag
+ * @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
+ * @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
+ * @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
+ * @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
+ * @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
+ * @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
+ * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
+ * @arg CAN_FLAG_FF0: FIFO 0 Full Flag
+ * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
+ * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
+ * @arg CAN_FLAG_FF1: FIFO 1 Full Flag
+ * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
+ * @arg CAN_FLAG_WKU: Wake up Flag
+ * @arg CAN_FLAG_SLAK: Sleep acknowledge Flag
+ * @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
+ * @arg CAN_FLAG_EWG: Error Warning Flag
+ * @arg CAN_FLAG_EPV: Error Passive Flag
+ * @arg CAN_FLAG_BOF: Bus-Off Flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define CAN_FLAG_MASK ((uint32_t)0x000000FF)
+#define __HAL_CAN_GET_FLAG(__HANDLE__, __FLAG__) \
+((((__FLAG__) >> 8) == 5)? ((((__HANDLE__)->Instance->TSR) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 2)? ((((__HANDLE__)->Instance->RF0R) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 4)? ((((__HANDLE__)->Instance->RF1R) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 1)? ((((__HANDLE__)->Instance->MSR) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \
+ ((((__HANDLE__)->Instance->ESR) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))))
+
+/** @brief Clear the specified CAN pending flag.
+ * @param __HANDLE__: specifies the CAN Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_TSR_RQCP0: Request MailBox0 Flag
+ * @arg CAN_TSR_RQCP1: Request MailBox1 Flag
+ * @arg CAN_TSR_RQCP2: Request MailBox2 Flag
+ * @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
+ * @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
+ * @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
+ * @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
+ * @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
+ * @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
+ * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
+ * @arg CAN_FLAG_FF0: FIFO 0 Full Flag
+ * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
+ * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
+ * @arg CAN_FLAG_FF1: FIFO 1 Full Flag
+ * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
+ * @arg CAN_FLAG_WKU: Wake up Flag
+ * @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
+ * @arg CAN_FLAG_EWG: Error Warning Flag
+ * @arg CAN_FLAG_EPV: Error Passive Flag
+ * @arg CAN_FLAG_BOF: Bus-Off Flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_CAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+((((__FLAG__) >> 8U) == 5)? (((__HANDLE__)->Instance->TSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 2)? (((__HANDLE__)->Instance->RF0R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 4)? (((__HANDLE__)->Instance->RF1R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 1)? (((__HANDLE__)->Instance->MSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): 0)
+
+
+/** @brief Check if the specified CAN interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the CAN Handle.
+ * @param __INTERRUPT__: specifies the CAN interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_IT_TME: Transmit mailbox empty interrupt enable
+ * @arg CAN_IT_FMP0: FIFO0 message pending interrupt enablev
+ * @arg CAN_IT_FMP1: FIFO1 message pending interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_CAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+ * @brief Check the transmission status of a CAN Frame.
+ * @param __HANDLE__: CAN handle.
+ * @param __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission.
+ * @retval The new status of transmission (TRUE or FALSE).
+ */
+#define __HAL_CAN_TRANSMIT_STATUS(__HANDLE__, __TRANSMITMAILBOX__)\
+(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) == (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) :\
+ ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) == (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) :\
+ ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)) == (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)))
+
+
+
+/**
+ * @brief Release the specified receive FIFO.
+ * @param __HANDLE__: CAN handle.
+ * @param __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+ * @retval None
+ */
+#define __HAL_CAN_FIFO_RELEASE(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
+((__HANDLE__)->Instance->RF0R |= CAN_RF0R_RFOM0) : ((__HANDLE__)->Instance->RF1R |= CAN_RF1R_RFOM1))
+
+/**
+ * @brief Cancel a transmit request.
+ * @param __HANDLE__: specifies the CAN Handle.
+ * @param __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission.
+ * @retval None
+ */
+#define __HAL_CAN_CANCEL_TRANSMIT(__HANDLE__, __TRANSMITMAILBOX__)\
+(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ0) :\
+ ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ1) :\
+ ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ2))
+
+/**
+ * @brief Enable or disables the DBG Freeze for CAN.
+ * @param __HANDLE__: specifies the CAN Handle.
+ * @param __NEWSTATE__: new state of the CAN peripheral.
+ * This parameter can be: ENABLE (CAN reception/transmission is frozen
+ * during debug. Reception FIFOs can still be accessed/controlled normally)
+ * or DISABLE (CAN is working during debug).
+ * @retval None
+ */
+#define __HAL_CAN_DBG_FREEZE(__HANDLE__, __NEWSTATE__) (((__NEWSTATE__) == ENABLE)? \
+((__HANDLE__)->Instance->MCR |= CAN_MCR_DBF) : ((__HANDLE__)->Instance->MCR &= ~CAN_MCR_DBF))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CAN_Exported_Functions CAN Exported Functions
+ * @{
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan);
+HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig);
+HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan);
+void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan);
+void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan);
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group2 I/O operation functions
+ * @brief I/O operation functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef *hcan, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef *hcan, uint8_t FIFONumber, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef *hcan, uint8_t FIFONumber);
+HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef *hcan);
+
+void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan);
+
+void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan);
+void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan);
+void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan);
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group3 Peripheral State and Error functions
+ * @brief CAN Peripheral State functions
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan);
+HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F072xB || STM32F042x6 || STM32F048xx || STM32F078xx || STM32F091xC || STM32F098xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_CAN_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_cec.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,598 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_cec.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of CEC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_CEC_H
+#define __STM32F0xx_HAL_CEC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F042x6) || defined(STM32F048xx) ||\
+ defined(STM32F051x8) || defined(STM32F058xx) ||\
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) ||\
+ defined(STM32F091xC) || defined(STM32F098xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CEC CEC HAL Module Driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CEC_Exported_Types CEC Exported Types
+ * @{
+ */
+
+/**
+ * @brief CEC Init Structure definition
+ */
+typedef struct
+{
+ uint32_t SignalFreeTime; /*!< Set SFT field, specifies the Signal Free Time.
+ It can be one of @ref CEC_Signal_Free_Time
+ and belongs to the set {0,...,7} where
+ 0x0 is the default configuration
+ else means 0.5 + (SignalFreeTime - 1) nominal data bit periods */
+
+ uint32_t Tolerance; /*!< Set RXTOL bit, specifies the tolerance accepted on the received waveforms,
+ it can be a value of @ref CEC_Tolerance : it is either CEC_STANDARD_TOLERANCE
+ or CEC_EXTENDED_TOLERANCE */
+
+ uint32_t BRERxStop; /*!< Set BRESTP bit @ref CEC_BRERxStop : specifies whether or not a Bit Rising Error stops the reception.
+ CEC_NO_RX_STOP_ON_BRE: reception is not stopped.
+ CEC_RX_STOP_ON_BRE: reception is stopped. */
+
+ uint32_t BREErrorBitGen; /*!< Set BREGEN bit @ref CEC_BREErrorBitGen : specifies whether or not an Error-Bit is generated on the
+ CEC line upon Bit Rising Error detection.
+ CEC_BRE_ERRORBIT_NO_GENERATION: no error-bit generation.
+ CEC_BRE_ERRORBIT_GENERATION: error-bit generation if BRESTP is set. */
+
+ uint32_t LBPEErrorBitGen; /*!< Set LBPEGEN bit @ref CEC_LBPEErrorBitGen : specifies whether or not an Error-Bit is generated on the
+ CEC line upon Long Bit Period Error detection.
+ CEC_LBPE_ERRORBIT_NO_GENERATION: no error-bit generation.
+ CEC_LBPE_ERRORBIT_GENERATION: error-bit generation. */
+
+ uint32_t BroadcastMsgNoErrorBitGen; /*!< Set BRDNOGEN bit @ref CEC_BroadCastMsgErrorBitGen : allows to avoid an Error-Bit generation on the CEC line
+ upon an error detected on a broadcast message.
+
+ It supersedes BREGEN and LBPEGEN bits for a broadcast message error handling. It can take two values:
+
+ 1) CEC_BROADCASTERROR_ERRORBIT_GENERATION.
+ a) BRE detection: error-bit generation on the CEC line if BRESTP=CEC_RX_STOP_ON_BRE
+ and BREGEN=CEC_BRE_ERRORBIT_NO_GENERATION.
+ b) LBPE detection: error-bit generation on the CEC line
+ if LBPGEN=CEC_LBPE_ERRORBIT_NO_GENERATION.
+
+ 2) CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION.
+ no error-bit generation in case neither a) nor b) are satisfied. Additionally,
+ there is no error-bit generation in case of Short Bit Period Error detection in
+ a broadcast message while LSTN bit is set. */
+
+ uint32_t SignalFreeTimeOption; /*!< Set SFTOP bit @ref CEC_SFT_Option : specifies when SFT timer starts.
+ CEC_SFT_START_ON_TXSOM SFT: timer starts when TXSOM is set by software.
+ CEC_SFT_START_ON_TX_RX_END: SFT timer starts automatically at the end of message transmission/reception. */
+
+ uint32_t OwnAddress; /*!< Set OAR field, specifies CEC device address within a 15-bit long field */
+
+ uint32_t ListenMode; /*!< Set LSTN bit @ref CEC_Listening_Mode : specifies device listening mode. It can take two values:
+
+ CEC_REDUCED_LISTENING_MODE: CEC peripheral receives only message addressed to its
+ own address (OAR). Messages addressed to different destination are ignored.
+ Broadcast messages are always received.
+
+ CEC_FULL_LISTENING_MODE: CEC peripheral receives messages addressed to its own
+ address (OAR) with positive acknowledge. Messages addressed to different destination
+ are received, but without interfering with the CEC bus: no acknowledge sent. */
+
+ uint8_t InitiatorAddress; /* Initiator address (source logical address, sent in each header) */
+
+}CEC_InitTypeDef;
+
+/**
+ * @brief HAL CEC State structures definition
+ */
+typedef enum
+{
+ HAL_CEC_STATE_RESET = 0x00, /*!< Peripheral Reset state */
+ HAL_CEC_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_CEC_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_CEC_STATE_BUSY_TX = 0x03, /*!< Data Transmission process is ongoing */
+ HAL_CEC_STATE_BUSY_RX = 0x04, /*!< Data Reception process is ongoing */
+ HAL_CEC_STATE_STANDBY_RX = 0x05, /*!< IP ready to receive, doesn't prevent IP to transmit */
+ HAL_CEC_STATE_TIMEOUT = 0x06, /*!< Timeout state */
+ HAL_CEC_STATE_ERROR = 0x07 /*!< State Error */
+}HAL_CEC_StateTypeDef;
+
+/**
+ * @brief HAL Error structures definition
+ */
+typedef enum
+{
+ HAL_CEC_ERROR_NONE = (uint32_t) 0x0, /*!< no error */
+ HAL_CEC_ERROR_RXOVR = CEC_ISR_RXOVR, /*!< CEC Rx-Overrun */
+ HAL_CEC_ERROR_BRE = CEC_ISR_BRE, /*!< CEC Rx Bit Rising Error */
+ HAL_CEC_ERROR_SBPE = CEC_ISR_SBPE, /*!< CEC Rx Short Bit period Error */
+ HAL_CEC_ERROR_LBPE = CEC_ISR_LBPE, /*!< CEC Rx Long Bit period Error */
+ HAL_CEC_ERROR_RXACKE = CEC_ISR_RXACKE, /*!< CEC Rx Missing Acknowledge */
+ HAL_CEC_ERROR_ARBLST = CEC_ISR_ARBLST, /*!< CEC Arbitration Lost */
+ HAL_CEC_ERROR_TXUDR = CEC_ISR_TXUDR, /*!< CEC Tx-Buffer Underrun */
+ HAL_CEC_ERROR_TXERR = CEC_ISR_TXERR, /*!< CEC Tx-Error */
+ HAL_CEC_ERROR_TXACKE = CEC_ISR_TXACKE /*!< CEC Tx Missing Acknowledge */
+}
+HAL_CEC_ErrorTypeDef;
+
+/**
+ * @brief CEC handle Structure definition
+ */
+typedef struct
+{
+ CEC_TypeDef *Instance; /* CEC registers base address */
+
+ CEC_InitTypeDef Init; /* CEC communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to CEC Tx transfer Buffer */
+
+ uint16_t TxXferCount; /* CEC Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to CEC Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* CEC Rx Transfer size, 0: header received only */
+
+ __IO uint32_t ErrorCode; /* For errors handling purposes, copy of ISR register
+ in case error is reported */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ HAL_CEC_StateTypeDef State; /* CEC communication state */
+
+}CEC_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CEC_Exported_Constants CEC Exported Constants
+ * @{
+ */
+
+/** @defgroup CEC_Signal_Free_Time Signal Free Time setting parameter
+ * @{
+ */
+#define CEC_DEFAULT_SFT ((uint32_t)0x00000000)
+#define CEC_0_5_BITPERIOD_SFT ((uint32_t)0x00000001)
+#define CEC_1_5_BITPERIOD_SFT ((uint32_t)0x00000002)
+#define CEC_2_5_BITPERIOD_SFT ((uint32_t)0x00000003)
+#define CEC_3_5_BITPERIOD_SFT ((uint32_t)0x00000004)
+#define CEC_4_5_BITPERIOD_SFT ((uint32_t)0x00000005)
+#define CEC_5_5_BITPERIOD_SFT ((uint32_t)0x00000006)
+#define CEC_6_5_BITPERIOD_SFT ((uint32_t)0x00000007)
+#define IS_CEC_SIGNALFREETIME(SFT) ((SFT) <= CEC_CFGR_SFT)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Tolerance Receiver Tolerance
+ * @{
+ */
+#define CEC_STANDARD_TOLERANCE ((uint32_t)0x00000000)
+#define CEC_EXTENDED_TOLERANCE ((uint32_t)CEC_CFGR_RXTOL)
+#define IS_CEC_TOLERANCE(RXTOL) (((RXTOL) == CEC_STANDARD_TOLERANCE) || \
+ ((RXTOL) == CEC_EXTENDED_TOLERANCE))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BRERxStop Reception Stop on Error
+ * @{
+ */
+#define CEC_NO_RX_STOP_ON_BRE ((uint32_t)0x00000000)
+#define CEC_RX_STOP_ON_BRE ((uint32_t)CEC_CFGR_BRESTP)
+#define IS_CEC_BRERXSTOP(BRERXSTOP) (((BRERXSTOP) == CEC_NO_RX_STOP_ON_BRE) || \
+ ((BRERXSTOP) == CEC_RX_STOP_ON_BRE))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BREErrorBitGen Error Bit Generation if Bit Rise Error reported
+ * @{
+ */
+#define CEC_BRE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000)
+#define CEC_BRE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BREGEN)
+#define IS_CEC_BREERRORBITGEN(ERRORBITGEN) (((ERRORBITGEN) == CEC_BRE_ERRORBIT_NO_GENERATION) || \
+ ((ERRORBITGEN) == CEC_BRE_ERRORBIT_GENERATION))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_LBPEErrorBitGen Error Bit Generation if Long Bit Period Error reported
+ * @{
+ */
+#define CEC_LBPE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000)
+#define CEC_LBPE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_LBPEGEN)
+#define IS_CEC_LBPEERRORBITGEN(ERRORBITGEN) (((ERRORBITGEN) == CEC_LBPE_ERRORBIT_NO_GENERATION) || \
+ ((ERRORBITGEN) == CEC_LBPE_ERRORBIT_GENERATION))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BroadCastMsgErrorBitGen Error Bit Generation on Broadcast message
+ * @{
+ */
+#define CEC_BROADCASTERROR_ERRORBIT_GENERATION ((uint32_t)0x00000000)
+#define CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BRDNOGEN)
+#define IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(ERRORBITGEN) (((ERRORBITGEN) == CEC_BROADCASTERROR_ERRORBIT_GENERATION) || \
+ ((ERRORBITGEN) == CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_SFT_Option Signal Free Time start option
+ * @{
+ */
+#define CEC_SFT_START_ON_TXSOM ((uint32_t)0x00000000)
+#define CEC_SFT_START_ON_TX_RX_END ((uint32_t)CEC_CFGR_SFTOPT)
+#define IS_CEC_SFTOP(SFTOP) (((SFTOP) == CEC_SFT_START_ON_TXSOM) || \
+ ((SFTOP) == CEC_SFT_START_ON_TX_RX_END))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Listening_Mode Listening mode option
+ * @{
+ */
+#define CEC_REDUCED_LISTENING_MODE ((uint32_t)0x00000000)
+#define CEC_FULL_LISTENING_MODE ((uint32_t)CEC_CFGR_LSTN)
+#define IS_CEC_LISTENING_MODE(MODE) (((MODE) == CEC_REDUCED_LISTENING_MODE) || \
+ ((MODE) == CEC_FULL_LISTENING_MODE))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_ALL_ERROR all RX or TX errors flags in CEC ISR register
+ * @{
+ */
+#define CEC_ISR_ALL_ERROR ((uint32_t)CEC_ISR_RXOVR|CEC_ISR_BRE|CEC_ISR_SBPE|CEC_ISR_LBPE|CEC_ISR_RXACKE|\
+ CEC_ISR_ARBLST|CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_IER_ALL_RX all RX errors interrupts enabling flag
+ * @{
+ */
+#define CEC_IER_RX_ALL_ERR ((uint32_t)CEC_IER_RXACKEIE|CEC_IER_LBPEIE|CEC_IER_SBPEIE|CEC_IER_BREIE|CEC_IER_RXOVRIE)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_IER_ALL_TX all TX errors interrupts enabling flag
+ * @{
+ */
+#define CEC_IER_TX_ALL_ERR ((uint32_t)CEC_IER_TXACKEIE|CEC_IER_TXERRIE|CEC_IER_TXUDRIE|CEC_IER_ARBLSTIE)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_OAR_Position Device Own Address position in CEC CFGR register
+ * @{
+ */
+#define CEC_CFGR_OAR_LSB_POS ((uint32_t) 16)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Initiator_Position Initiator logical address position in message header
+ * @{
+ */
+#define CEC_INITIATOR_LSB_POS ((uint32_t) 4)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup CEC_Exported_Macros CEC Exported Macros
+ * @{
+ */
+
+/** @brief Reset CEC handle state
+ * @param __HANDLE__: CEC handle.
+ * @retval None
+ */
+#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CEC_STATE_RESET)
+
+/** @brief Checks whether or not the specified CEC interrupt flag is set.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg CEC_ISR_RXBR : Rx-Byte Received
+ * @arg CEC_ISR_RXEND : End of Reception
+ * @arg CEC_ISR_RXOVR : Rx Overrun
+ * @arg CEC_ISR_BRE : Rx Bit Rising Error
+ * @arg CEC_ISR_SBPE : Rx Short Bit Period Error
+ * @arg CEC_ISR_LBPE : Rx Long Bit Period Error
+ * @arg CEC_ISR_RXACKE : Rx Missing Acknowledge
+ * @arg CEC_ISR_ARBLST : Arbitration lost
+ * @arg CEC_ISR_TXBR : Tx-Byte Request
+ * @arg CEC_ISR_TXEND : End of Transmission
+ * @arg CEC_ISR_TXUDR : Tx-buffer Underrun
+ * @arg CEC_ISR_TXERR : Tx Error
+ * @arg CEC_ISR_TXACKE : Tx Missing Acknowledge
+ * @retval ITStatus
+ */
+#define __HAL_CEC_GET_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->ISR & (__INTERRUPT__))
+
+/** @brief Clears the interrupt or status flag when raised (write at 1)
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __FLAG__: specifies the interrupt/status flag to clear.
+ * This parameter can be one of the following values:
+ * @arg CEC_ISR_RXBR : Rx-Byte Received
+ * @arg CEC_ISR_RXEND : End of Reception
+ * @arg CEC_ISR_RXOVR : Rx Overrun
+ * @arg CEC_ISR_BRE : Rx Bit Rising Error
+ * @arg CEC_ISR_SBPE : Rx Short Bit Period Error
+ * @arg CEC_ISR_LBPE : Rx Long Bit Period Error
+ * @arg CEC_ISR_RXACKE : Rx Missing Acknowledge
+ * @arg CEC_ISR_ARBLST : Arbitration lost
+ * @arg CEC_ISR_TXBR : Tx-Byte Request
+ * @arg CEC_ISR_TXEND : End of Transmission
+ * @arg CEC_ISR_TXUDR : Tx-buffer Underrun
+ * @arg CEC_ISR_TXERR : Tx Error
+ * @arg CEC_ISR_TXACKE : Tx Missing Acknowledge
+ * @retval none
+ */
+#define __HAL_CEC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR = (__FLAG__))
+
+/** @brief Enables the specified CEC interrupt.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the CEC interrupt to enable.
+ * This parameter can be one of the following values:
+ * @arg CEC_IER_RXBRIE : Rx-Byte Received IT Enable
+ * @arg CEC_IER_RXENDIE : End Of Reception IT Enable
+ * @arg CEC_IER_RXOVRIE : Rx-Overrun IT Enable
+ * @arg CEC_IER_BREIE : Rx Bit Rising Error IT Enable
+ * @arg CEC_IER_SBPEIE : Rx Short Bit period Error IT Enable
+ * @arg CEC_IER_LBPEIE : Rx Long Bit period Error IT Enable
+ * @arg CEC_IER_RXACKEIE : Rx Missing Acknowledge IT Enable
+ * @arg CEC_IER_ARBLSTIE : Arbitration Lost IT Enable
+ * @arg CEC_IER_TXBRIE : Tx Byte Request IT Enable
+ * @arg CEC_IER_TXENDIE : End of Transmission IT Enable
+ * @arg CEC_IER_TXUDRIE : Tx-Buffer Underrun IT Enable
+ * @arg CEC_IER_TXERRIE : Tx-Error IT Enable
+ * @arg CEC_IER_TXACKEIE : Tx Missing Acknowledge IT Enable
+ * @retval none
+ */
+#define __HAL_CEC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/** @brief Disables the specified CEC interrupt.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the CEC interrupt to disable.
+ * This parameter can be one of the following values:
+ * @arg CEC_IER_RXBRIE : Rx-Byte Received IT Enable
+ * @arg CEC_IER_RXENDIE : End Of Reception IT Enable
+ * @arg CEC_IER_RXOVRIE : Rx-Overrun IT Enable
+ * @arg CEC_IER_BREIE : Rx Bit Rising Error IT Enable
+ * @arg CEC_IER_SBPEIE : Rx Short Bit period Error IT Enable
+ * @arg CEC_IER_LBPEIE : Rx Long Bit period Error IT Enable
+ * @arg CEC_IER_RXACKEIE : Rx Missing Acknowledge IT Enable
+ * @arg CEC_IER_ARBLSTIE : Arbitration Lost IT Enable
+ * @arg CEC_IER_TXBRIE : Tx Byte Request IT Enable
+ * @arg CEC_IER_TXENDIE : End of Transmission IT Enable
+ * @arg CEC_IER_TXUDRIE : Tx-Buffer Underrun IT Enable
+ * @arg CEC_IER_TXERRIE : Tx-Error IT Enable
+ * @arg CEC_IER_TXACKEIE : Tx Missing Acknowledge IT Enable
+ * @retval none
+ */
+#define __HAL_CEC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__)))
+
+/** @brief Checks whether or not the specified CEC interrupt is enabled.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the CEC interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg CEC_IER_RXBRIE : Rx-Byte Received IT Enable
+ * @arg CEC_IER_RXENDIE : End Of Reception IT Enable
+ * @arg CEC_IER_RXOVRIE : Rx-Overrun IT Enable
+ * @arg CEC_IER_BREIE : Rx Bit Rising Error IT Enable
+ * @arg CEC_IER_SBPEIE : Rx Short Bit period Error IT Enable
+ * @arg CEC_IER_LBPEIE : Rx Long Bit period Error IT Enable
+ * @arg CEC_IER_RXACKEIE : Rx Missing Acknowledge IT Enable
+ * @arg CEC_IER_ARBLSTIE : Arbitration Lost IT Enable
+ * @arg CEC_IER_TXBRIE : Tx Byte Request IT Enable
+ * @arg CEC_IER_TXENDIE : End of Transmission IT Enable
+ * @arg CEC_IER_TXUDRIE : Tx-Buffer Underrun IT Enable
+ * @arg CEC_IER_TXERRIE : Tx-Error IT Enable
+ * @arg CEC_IER_TXACKEIE : Tx Missing Acknowledge IT Enable
+ * @retval FlagStatus
+ */
+#define __HAL_CEC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__))
+
+/** @brief Enables the CEC device
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_CECEN)
+
+/** @brief Disables the CEC device
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~CEC_CR_CECEN)
+
+/** @brief Set Transmission Start flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_FIRST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXSOM)
+
+/** @brief Set Transmission End flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ * If the CEC message consists of only one byte, TXEOM must be set before of TXSOM.
+ */
+#define __HAL_CEC_LAST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXEOM)
+
+/** @brief Get Transmission Start flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval FlagStatus
+ */
+#define __HAL_CEC_GET_TRANSMISSION_START_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXSOM)
+
+/** @brief Get Transmission End flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval FlagStatus
+ */
+#define __HAL_CEC_GET_TRANSMISSION_END_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXEOM)
+
+/** @brief Clear OAR register
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_CLEAR_OAR(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_OAR)
+
+/** @brief Set OAR register (without resetting previously set address in case of multi-address mode)
+ * To reset OAR, __HAL_CEC_CLEAR_OAR() needs to be called beforehand
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __ADDRESS__: Own Address value (CEC logical address is identified by bit position)
+ * @retval none
+ */
+#define __HAL_CEC_SET_OAR(__HANDLE__,__ADDRESS__) SET_BIT((__HANDLE__)->Instance->CFGR, (__ADDRESS__)<< CEC_CFGR_OAR_LSB_POS)
+
+/** @brief Check CEC device Own Address Register (OAR) setting.
+ * OAR address is written in a 15-bit field within CEC_CFGR register.
+ * @param __ADDRESS__: CEC own address.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_OAR_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x07FFF)
+
+/** @brief Check CEC initiator or destination logical address setting.
+ * Initiator and destination addresses are coded over 4 bits.
+ * @param __ADDRESS__: CEC initiator or logical address.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0xF)
+
+/** @brief Check CEC message size.
+ * The message size is the payload size: without counting the header,
+ * it varies from 0 byte (ping operation, one header only, no payload) to
+ * 15 bytes (1 opcode and up to 14 operands following the header).
+ * @param __SIZE__: CEC message size.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_MSGSIZE(__SIZE__) ((__SIZE__) <= 0xF)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CEC_Exported_Functions CEC Exported Functions
+ * @{
+ */
+/** @addtogroup CEC_Exported_Functions_Group1 Initialization/de-initialization function
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec);
+HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec);
+void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec);
+void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec);
+/**
+ * @}
+ */
+
+/** @addtogroup CEC_Exported_Functions_Group2 IO operation function
+ * @brief CEC Transmit/Receive functions
+ * @{
+ */
+/* I/O operation functions ***************************************************/
+HAL_StatusTypeDef HAL_CEC_Transmit(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CEC_Receive(CEC_HandleTypeDef *hcec, uint8_t *pData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size);
+HAL_StatusTypeDef HAL_CEC_Receive_IT(CEC_HandleTypeDef *hcec, uint8_t *pData);
+void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec);
+void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec);
+void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec);
+void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec);
+/**
+ * @}
+ */
+
+/** @addtogroup CEC_Exported_Functions_Group3 Peripheral Control function
+ * @brief CEC control functions
+ * @{
+ */
+/* Peripheral State functions ************************************************/
+HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec);
+uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(STM32F042x6) || defined(STM32F048xx) || */
+ /* defined(STM32F051x8) || defined(STM32F058xx) || */
+ /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || */
+ /* defined(STM32F091xC) || defined(STM32F098xx) */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_CEC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_comp.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,479 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_comp.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of COMP HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_COMP_H
+#define __STM32F0xx_HAL_COMP_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup COMP COMP HAL Module Driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup COMP_Exported_Types COMP Exported Types
+ * @{
+ */
+
+/**
+ * @brief COMP Init structure definition
+ */
+typedef struct
+{
+
+ uint32_t InvertingInput; /*!< Selects the inverting input of the comparator.
+ This parameter can be a value of @ref COMP_InvertingInput */
+
+ uint32_t NonInvertingInput; /*!< Selects the non inverting input of the comparator.
+ This parameter can be a value of @ref COMP_NonInvertingInput */
+
+ uint32_t Output; /*!< Selects the output redirection of the comparator.
+ This parameter can be a value of @ref COMP_Output */
+
+ uint32_t OutputPol; /*!< Selects the output polarity of the comparator.
+ This parameter can be a value of @ref COMP_OutputPolarity */
+
+ uint32_t Hysteresis; /*!< Selects the hysteresis voltage of the comparator.
+ This parameter can be a value of @ref COMP_Hysteresis */
+
+ uint32_t Mode; /*!< Selects the operating comsumption mode of the comparator
+ to adjust the speed/consumption.
+ This parameter can be a value of @ref COMP_Mode */
+
+ uint32_t WindowMode; /*!< Selects the window mode of the comparator 1 & 2.
+ This parameter can be a value of @ref COMP_WindowMode */
+
+ uint32_t TriggerMode; /*!< Selects the trigger mode of the comparator (interrupt mode).
+ This parameter can be a value of @ref COMP_TriggerMode */
+
+}COMP_InitTypeDef;
+
+/**
+ * @brief COMP Handle Structure definition
+ */
+typedef struct
+{
+ COMP_TypeDef *Instance; /*!< Register base address */
+ COMP_InitTypeDef Init; /*!< COMP required parameters */
+ HAL_LockTypeDef Lock; /*!< Locking object */
+ __IO uint32_t State; /*!< COMP communication state
+ This parameter can be a value of @ref COMP_State */
+}COMP_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup COMP_Exported_Constants COMP Exported Constants
+ * @{
+ */
+
+/** @defgroup COMP_State COMP State
+ * @{
+ */
+#define HAL_COMP_STATE_RESET ((uint32_t)0x00000000) /*!< COMP not yet initialized or disabled */
+#define HAL_COMP_STATE_READY ((uint32_t)0x00000001) /*!< COMP initialized and ready for use */
+#define HAL_COMP_STATE_READY_LOCKED ((uint32_t)0x00000011) /*!< COMP initialized but the configuration is locked */
+#define HAL_COMP_STATE_BUSY ((uint32_t)0x00000002) /*!< COMP is running */
+#define HAL_COMP_STATE_BUSY_LOCKED ((uint32_t)0x00000012) /*!< COMP is running and the configuration is locked */
+/**
+ * @}
+ */
+
+/** @defgroup COMP_OutputPolarity COMP OutputPolarity
+ * @{
+ */
+#define COMP_OUTPUTPOL_NONINVERTED ((uint32_t)0x00000000) /*!< COMP output on GPIO isn't inverted */
+#define COMP_OUTPUTPOL_INVERTED COMP_CSR_COMP1POL /*!< COMP output on GPIO is inverted */
+
+#define IS_COMP_OUTPUTPOL(POL) (((POL) == COMP_OUTPUTPOL_NONINVERTED) || \
+ ((POL) == COMP_OUTPUTPOL_INVERTED))
+/**
+ * @}
+ */
+
+/** @defgroup COMP_Hysteresis COMP Hysteresis
+ * @{
+ */
+#define COMP_HYSTERESIS_NONE ((uint32_t)0x00000000) /*!< No hysteresis */
+#define COMP_HYSTERESIS_LOW COMP_CSR_COMP1HYST_0 /*!< Hysteresis level low */
+#define COMP_HYSTERESIS_MEDIUM COMP_CSR_COMP1HYST_1 /*!< Hysteresis level medium */
+#define COMP_HYSTERESIS_HIGH COMP_CSR_COMP1HYST /*!< Hysteresis level high */
+
+#define IS_COMP_HYSTERESIS(HYSTERESIS) (((HYSTERESIS) == COMP_HYSTERESIS_NONE) || \
+ ((HYSTERESIS) == COMP_HYSTERESIS_LOW) || \
+ ((HYSTERESIS) == COMP_HYSTERESIS_MEDIUM) || \
+ ((HYSTERESIS) == COMP_HYSTERESIS_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup COMP_Mode COMP Mode
+ * @{
+ */
+/* Please refer to the electrical characteristics in the device datasheet for
+ the power consumption values */
+#define COMP_MODE_HIGHSPEED ((uint32_t)0x00000000) /*!< High Speed */
+#define COMP_MODE_MEDIUMSPEED COMP_CSR_COMP1MODE_0 /*!< Medium Speed */
+#define COMP_MODE_LOWPOWER COMP_CSR_COMP1MODE_1 /*!< Low power mode */
+#define COMP_MODE_ULTRALOWPOWER COMP_CSR_COMP1MODE /*!< Ultra-low power mode */
+
+#define IS_COMP_MODE(MODE) (((MODE) == COMP_MODE_HIGHSPEED) || \
+ ((MODE) == COMP_MODE_MEDIUMSPEED) || \
+ ((MODE) == COMP_MODE_LOWPOWER) || \
+ ((MODE) == COMP_MODE_ULTRALOWPOWER))
+
+/**
+ * @}
+ */
+
+/** @defgroup COMP_InvertingInput COMP InvertingInput
+ * @{
+ */
+
+#define COMP_INVERTINGINPUT_1_4VREFINT ((uint32_t)0x00000000) /*!< 1/4 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_1_2VREFINT COMP_CSR_COMP1INSEL_0 /*!< 1/2 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_3_4VREFINT COMP_CSR_COMP1INSEL_1 /*!< 3/4 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_VREFINT (COMP_CSR_COMP1INSEL_1|COMP_CSR_COMP1INSEL_0) /*!< VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_DAC1 COMP_CSR_COMP1INSEL_2 /*!< DAC_OUT1 (PA4) connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_DAC1SWITCHCLOSED (COMP_CSR_COMP1INSEL_2|COMP_CSR_COMP1SW1) /*!< DAC_OUT1 (PA4) connected to comparator inverting input
+ and close switch (PA0 for COMP1 only) */
+#define COMP_INVERTINGINPUT_DAC2 (COMP_CSR_COMP1INSEL_2|COMP_CSR_COMP1INSEL_0) /*!< DAC_OUT2 (PA5) connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_IO1 (COMP_CSR_COMP1INSEL_2|COMP_CSR_COMP1INSEL_1) /*!< IO (PA0 for COMP1 and PA2 for COMP2) connected to comparator inverting input */
+
+#define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_DAC1) || \
+ ((INPUT) == COMP_INVERTINGINPUT_DAC1SWITCHCLOSED) || \
+ ((INPUT) == COMP_INVERTINGINPUT_DAC2) || \
+ ((INPUT) == COMP_INVERTINGINPUT_IO1))
+/**
+ * @}
+ */
+
+/** @defgroup COMP_NonInvertingInput COMP NonInvertingInput
+ * @{
+ */
+#define COMP_NONINVERTINGINPUT_IO1 ((uint32_t)0x00000000) /*!< I/O1 (PA1 for COMP1, PA3 for COMP2)
+ connected to comparator non inverting input */
+#define COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED COMP_CSR_COMP1SW1 /*!< DAC ouput connected to comparator COMP1 non inverting input */
+
+#define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
+ ((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))
+/**
+ * @}
+ */
+
+/** @defgroup COMP_Output COMP Output
+ * @{
+ */
+
+/* Output Redirection common for COMP1 and COMP2 */
+#define COMP_OUTPUT_NONE ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */
+#define COMP_OUTPUT_TIM1BKIN COMP_CSR_COMP1OUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */
+#define COMP_OUTPUT_TIM1IC1 COMP_CSR_COMP1OUTSEL_1 /*!< COMP output connected to TIM1 Input Capture 1 */
+#define COMP_OUTPUT_TIM1OCREFCLR (COMP_CSR_COMP1OUTSEL_1|COMP_CSR_COMP1OUTSEL_0) /*!< COMP output connected to TIM1 OCREF Clear */
+#define COMP_OUTPUT_TIM2IC4 COMP_CSR_COMP1OUTSEL_2 /*!< COMP output connected to TIM2 Input Capture 4 */
+#define COMP_OUTPUT_TIM2OCREFCLR (COMP_CSR_COMP1OUTSEL_2|COMP_CSR_COMP1OUTSEL_0) /*!< COMP output connected to TIM2 OCREF Clear */
+#define COMP_OUTPUT_TIM3IC1 (COMP_CSR_COMP1OUTSEL_2|COMP_CSR_COMP1OUTSEL_1) /*!< COMP output connected to TIM3 Input Capture 1 */
+#define COMP_OUTPUT_TIM3OCREFCLR COMP_CSR_COMP1OUTSEL /*!< COMP output connected to TIM3 OCREF Clear */
+
+#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR))
+
+/**
+ * @}
+ */
+
+/** @defgroup COMP_OutputLevel COMP OutputLevel
+ * @{
+ */
+/* When output polarity is not inverted, comparator output is low when
+ the non-inverting input is at a lower voltage than the inverting input*/
+#define COMP_OUTPUTLEVEL_LOW ((uint32_t)0x00000000)
+/* When output polarity is not inverted, comparator output is high when
+ the non-inverting input is at a higher voltage than the inverting input */
+#define COMP_OUTPUTLEVEL_HIGH COMP_CSR_COMP1OUT
+/**
+ * @}
+ */
+
+/** @defgroup COMP_TriggerMode COMP TriggerMode
+ * @{
+ */
+#define COMP_TRIGGERMODE_NONE ((uint32_t)0x00000000) /*!< No External Interrupt trigger detection */
+#define COMP_TRIGGERMODE_IT_RISING ((uint32_t)0x00000001) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define COMP_TRIGGERMODE_IT_FALLING ((uint32_t)0x00000002) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define COMP_TRIGGERMODE_IT_RISING_FALLING ((uint32_t)0x00000003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+
+#define IS_COMP_TRIGGERMODE(MODE) (((MODE) == COMP_TRIGGERMODE_NONE) || \
+ ((MODE) == COMP_TRIGGERMODE_IT_RISING) || \
+ ((MODE) == COMP_TRIGGERMODE_IT_FALLING) || \
+ ((MODE) == COMP_TRIGGERMODE_IT_RISING_FALLING))
+/**
+ * @}
+ */
+
+/** @defgroup COMP_WindowMode COMP WindowMode
+ * @{
+ */
+#define COMP_WINDOWMODE_DISABLED ((uint32_t)0x00000000) /*!< Window mode disabled */
+#define COMP_WINDOWMODE_ENABLED COMP_CSR_WNDWEN /*!< Window mode enabled: non inverting input of comparator 2
+ is connected to the non inverting input of comparator 1 (PA1) */
+
+#define IS_COMP_WINDOWMODE(WINDOWMODE) (((WINDOWMODE) == COMP_WINDOWMODE_DISABLED) || \
+ ((WINDOWMODE) == COMP_WINDOWMODE_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup COMP_ExtiLineEvent COMP ExtiLineEvent
+ * Elements values convention: XXXX0000
+ * - XXXX : Interrupt mask in the EMR/IMR/RTSR/FTSR register
+ * @{
+ */
+#define COMP_EXTI_LINE_COMP1_EVENT ((uint32_t)0x00200000) /*!< External interrupt line 21 Connected to COMP1 */
+#define COMP_EXTI_LINE_COMP2_EVENT ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to COMP2 */
+
+/**
+ * @}
+ */
+
+/** @defgroup COMP_Lock COMP Lock
+ * @{
+ */
+#define COMP_LOCK_DISABLE ((uint32_t)0x00000000)
+#define COMP_LOCK_ENABLE COMP_CSR_COMP1LOCK
+
+#define COMP_STATE_BIT_LOCK ((uint32_t)0x10)
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup COMP_Exported_Macros COMP Exported Macros
+ * @{
+ */
+
+/** @brief Reset COMP handle state
+ * @param __HANDLE__: COMP handle.
+ * @retval None
+ */
+#define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_COMP_STATE_RESET)
+
+/**
+ * @brief Checks whether the specified EXTI line flag is set or not.
+ * @param __FLAG__: specifies the COMP Exti sources to be checked.
+ * This parameter can be a value of @ref COMP_ExtiLineEvent
+ * @retval The state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (EXTI->PR & (__FLAG__))
+
+/**
+ * @brief Clear the COMP Exti flags.
+ * @param __FLAG__: specifies the COMP Exti sources to be cleared.
+ * This parameter can be a value of @ref COMP_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (EXTI->PR = (__FLAG__))
+
+/**
+ * @brief Enable the COMP Exti Line.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be enabled.
+ * This parameter can be a value of @ref COMP_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (EXTI->IMR |= (__EXTILINE__))
+
+/**
+ * @brief Disable the COMP Exti Line.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be disabled.
+ * This parameter can be a value of @ref COMP_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (EXTI->IMR &= ~(__EXTILINE__))
+
+/**
+ * @brief Enable the Exti Line rising edge trigger.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be enabled.
+ * This parameter can be a value of @ref COMP_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (EXTI->RTSR |= (__EXTILINE__))
+
+/**
+ * @brief Disable the Exti Line rising edge trigger.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be disabled.
+ * This parameter can be a value of @ref COMP_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (EXTI->RTSR &= ~(__EXTILINE__))
+
+/**
+ * @brief Enable the Exti Line falling edge trigger.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be enabled.
+ * This parameter can be a value of @ref COMP_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (EXTI->FTSR |= (__EXTILINE__))
+
+/**
+ * @brief Disable the Exti Line falling edge trigger.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be disabled.
+ * This parameter can be a value of @ref COMP_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (EXTI->FTSR &= ~(__EXTILINE__))
+
+/**
+ * @brief Get the specified EXTI line for a comparator instance
+ * @param __INSTANCE__: specifies the COMP instance.
+ * @retval value of @ref COMP_ExtiLineEvent
+ */
+#define __HAL_COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1_EVENT : \
+ COMP_EXTI_LINE_COMP2_EVENT)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup COMP_Exported_Functions COMP Exported Functions
+ * @{
+ */
+/** @addtogroup COMP_Exported_Functions_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_DeInit (COMP_HandleTypeDef *hcomp);
+void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp);
+void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp);
+/**
+ * @}
+ */
+
+/** @addtogroup COMP_Exported_Functions_Group2 I/O operation functions
+ * @brief Data transfers functions
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_Start_IT(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_Stop_IT(COMP_HandleTypeDef *hcomp);
+void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp);
+/**
+ * @}
+ */
+
+/** @addtogroup COMP_Exported_Functions_Group3 Peripheral Control functions
+ * @brief management functions
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp);
+uint32_t HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp);
+
+/* Callback in Interrupt mode */
+void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp);
+/**
+ * @}
+ */
+
+/** @addtogroup COMP_Exported_Functions_Group4 Peripheral State functions
+ * @brief Peripheral State functions
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+uint32_t HAL_COMP_GetState(COMP_HandleTypeDef *hcomp);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_COMP_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_conf.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,307 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_conf_template.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief HAL configuration file.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_CONF_H
+#define __STM32F0xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_CAN_MODULE_ENABLED
+#define HAL_CEC_MODULE_ENABLED
+#define HAL_COMP_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_SMBUS_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_TSC_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+
+/* ######################### Oscillator Values adaptation ################### */
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+/**
+ * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
+ * Timeout value
+ */
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT ((uint32_t)500) /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup
+ * Timeout value
+ */
+#if !defined (HSI_STARTUP_TIMEOUT)
+ #define HSI_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSI start up */
+#endif /* HSI_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator for ADC (HSI14) value.
+ */
+#if !defined (HSI14_VALUE)
+#define HSI14_VALUE ((uint32_t)14000000) /*!< Value of the Internal High Speed oscillator for ADC in Hz.
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+#endif /* HSI14_VALUE */
+
+/**
+ * @brief Internal High Speed oscillator for USB (HSI48) value.
+ */
+#if !defined (HSI48_VALUE)
+#define HSI48_VALUE ((uint32_t)48000000) /*!< Value of the Internal High Speed oscillator for USB in Hz.
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+#endif /* HSI48_VALUE */
+
+/**
+ * @brief Internal Low Speed oscillator (LSI) value.
+ */
+#if !defined (LSI_VALUE)
+ #define LSI_VALUE ((uint32_t)40000)
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY ((uint32_t)(1<<__NVIC_PRIO_BITS) - 1) /*!< tick interrupt priority (lowest by default) */
+ /* Warning: Must be set to higher priority for HAL_Delay() */
+ /* and HAL_GetTick() usage under interrupt context */
+#define USE_RTOS 0
+#define PREFETCH_ENABLE 1
+#define INSTRUCTION_CACHE_ENABLE 0
+#define DATA_CACHE_ENABLE 0
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/*#define USE_FULL_ASSERT 1*/
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32f0xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32f0xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+ #include "stm32f0xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32f0xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32f0xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32f0xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f0xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+ #include "stm32f0xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32f0xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32f0xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32f0xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f0xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f0xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f0xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f0xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f0xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f0xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f0xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f0xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32f0xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f0xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f0xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_TSC_MODULE_ENABLED
+ #include "stm32f0xx_hal_tsc.h"
+#endif /* HAL_TSC_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f0xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f0xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f0xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_cortex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,166 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_cortex.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of CORTEX HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_CORTEX_H
+#define __STM32F0xx_HAL_CORTEX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CORTEX CORTEX HAL module driver
+ * @{
+ */
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
+ * @{
+ */
+
+/** @defgroup CORTEX_Priority CORTEX Priority
+ * @{
+ */
+#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x4)
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_SysTick_clock_source CORTEX SysTick clock source
+ * @{
+ */
+#define SYSTICK_CLKSOURCE_HCLK_DIV8 ((uint32_t)0x00000000)
+#define SYSTICK_CLKSOURCE_HCLK ((uint32_t)0x00000004)
+#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
+ ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported Macros -----------------------------------------------------------*/
+/** @defgroup CORTEX_Exported_Macro CORTEX Exported Macro
+ * @{
+ */
+
+/** @brief Configures the SysTick clock source.
+ * @param __CLKSRC__: specifies the SysTick clock source.
+ * This parameter can be one of the following values:
+ * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
+ * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
+ * @retval None
+ */
+#define __HAL_CORTEX_SYSTICKCLK_CONFIG(__CLKSRC__) \
+ do { \
+ if ((__CLKSRC__) == SYSTICK_CLKSOURCE_HCLK) \
+ { \
+ SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK; \
+ } \
+ else \
+ SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK; \
+ } while(0)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CORTEX_Exported_Functions CORTEX Exported Functions
+ * @{
+ */
+/** @addtogroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+/* Initialization and de-initialization functions *******************************/
+void HAL_NVIC_SetPriority(IRQn_Type IRQn,uint32_t PreemptPriority, uint32_t SubPriority);
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SystemReset(void);
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
+/**
+ * @}
+ */
+
+/** @addtogroup CORTEX_Exported_Functions_Group2 Peripheral Control functions
+ * @brief Cortex control functions
+ * @{
+ */
+
+/* Peripheral Control functions *************************************************/
+uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn);
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
+void HAL_SYSTICK_IRQHandler(void);
+void HAL_SYSTICK_Callback(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_CORTEX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_crc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,327 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_crc.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of CRC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_CRC_H
+#define __STM32F0xx_HAL_CRC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CRC CRC HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CRC_Exported_Types CRC Exported Types
+ * @{
+ */
+/**
+ * @brief CRC HAL State Structure definition
+ */
+typedef enum
+{
+ HAL_CRC_STATE_RESET = 0x00, /*!< CRC not yet initialized or disabled */
+ HAL_CRC_STATE_READY = 0x01, /*!< CRC initialized and ready for use */
+ HAL_CRC_STATE_BUSY = 0x02, /*!< CRC internal process is ongoing */
+ HAL_CRC_STATE_TIMEOUT = 0x03, /*!< CRC timeout state */
+ HAL_CRC_STATE_ERROR = 0x04 /*!< CRC error state */
+}HAL_CRC_StateTypeDef;
+
+
+/**
+ * @brief CRC Init Structure definition
+ */
+typedef struct
+{
+ uint8_t DefaultPolynomialUse; /*!< This parameter is a value of @ref CRC_Default_Polynomial and indicates if default polynomial is used.
+ If set to DEFAULT_POLYNOMIAL_ENABLE, resort to default
+ X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2+ X +1.
+ In that case, there is no need to set GeneratingPolynomial field.
+ If otherwise set to DEFAULT_POLYNOMIAL_DISABLE, GeneratingPolynomial and CRCLength fields must be set */
+
+ uint8_t DefaultInitValueUse; /*!< This parameter is a value of @ref CRC_Default_InitValue_Use and indicates if default init value is used.
+ If set to DEFAULT_INIT_VALUE_ENABLE, resort to default
+ 0xFFFFFFFF value. In that case, there is no need to set InitValue field.
+ If otherwise set to DEFAULT_INIT_VALUE_DISABLE, InitValue field must be set */
+
+ uint32_t GeneratingPolynomial; /*!< Set CRC generating polynomial. 7, 8, 16 or 32-bit long value for a polynomial degree
+ respectively equal to 7, 8, 16 or 32. This field is written in normal representation,
+ e.g., for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65.
+ No need to specify it if DefaultPolynomialUse is set to DEFAULT_POLYNOMIAL_ENABLE */
+
+ uint32_t CRCLength; /*!< This parameter is a value of @ref CRCEx_Polynomial_Sizes and indicates CRC length.
+ Value can be either one of
+ CRC_POLYLENGTH_32B (32-bit CRC)
+ CRC_POLYLENGTH_16B (16-bit CRC)
+ CRC_POLYLENGTH_8B (8-bit CRC)
+ CRC_POLYLENGTH_7B (7-bit CRC) */
+
+ uint32_t InitValue; /*!< Init value to initiate CRC computation. No need to specify it if DefaultInitValueUse
+ is set to DEFAULT_INIT_VALUE_ENABLE */
+
+ uint32_t InputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Input_Data_Inversion and specifies input data inversion mode.
+ Can be either one of the following values
+ CRC_INPUTDATA_INVERSION_NONE no input data inversion
+ CRC_INPUTDATA_INVERSION_BYTE byte-wise inversion, 0x1A2B3C4D becomes 0x58D43CB2
+ CRC_INPUTDATA_INVERSION_HALFWORD halfword-wise inversion, 0x1A2B3C4D becomes 0xD458B23C
+ CRC_INPUTDATA_INVERSION_WORD word-wise inversion, 0x1A2B3C4D becomes 0xB23CD458 */
+
+ uint32_t OutputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Output_Data_Inversion and specifies output data (i.e. CRC) inversion mode.
+ Can be either
+ CRC_OUTPUTDATA_INVERSION_DISABLED no CRC inversion, or
+ CRC_OUTPUTDATA_INVERSION_ENABLED CRC 0x11223344 is converted into 0x22CC4488 */
+}CRC_InitTypeDef;
+
+
+/**
+ * @brief CRC Handle Structure definition
+ */
+typedef struct
+{
+ CRC_TypeDef *Instance; /*!< Register base address */
+
+ CRC_InitTypeDef Init; /*!< CRC configuration parameters */
+
+ HAL_LockTypeDef Lock; /*!< CRC Locking object */
+
+ __IO HAL_CRC_StateTypeDef State; /*!< CRC communication state */
+
+ uint32_t InputDataFormat; /*!< This parameter is a value of @ref CRC_Input_Buffer_Format and specifies input data format.
+ Can be either
+ CRC_INPUTDATA_FORMAT_BYTES input data is a stream of bytes (8-bit data)
+ CRC_INPUTDATA_FORMAT_HALFWORDS input data is a stream of half-words (16-bit data)
+ CRC_INPUTDATA_FORMAT_WORDS input data is a stream of words (32-bits data)
+ Note that constant CRC_INPUT_FORMAT_UNDEFINED is defined but an initialization error
+ must occur if InputBufferFormat is not one of the three values listed above */
+}CRC_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CRC_Exported_Constants CRC Exported Constants
+ * @{
+ */
+/** @defgroup CRC_Default_Polynomial_Value Default CRC generating polynomial
+ * @{
+ */
+#define DEFAULT_CRC32_POLY 0x04C11DB7
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Default_InitValue Default CRC computation initialization value
+ * @{
+ */
+#define DEFAULT_CRC_INITVALUE 0xFFFFFFFF
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Default_Polynomial Indicates whether or not default polynomial is used
+ * @{
+ */
+#define DEFAULT_POLYNOMIAL_ENABLE ((uint8_t)0x00)
+#define DEFAULT_POLYNOMIAL_DISABLE ((uint8_t)0x01)
+
+#define IS_DEFAULT_POLYNOMIAL(DEFAULT) (((DEFAULT) == DEFAULT_POLYNOMIAL_ENABLE) || \
+ ((DEFAULT) == DEFAULT_POLYNOMIAL_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Default_InitValue_Use Indicates whether or not default init value is used
+ * @{
+ */
+#define DEFAULT_INIT_VALUE_ENABLE ((uint8_t)0x00)
+#define DEFAULT_INIT_VALUE_DISABLE ((uint8_t)0x01)
+
+#define IS_DEFAULT_INIT_VALUE(VALUE) (((VALUE) == DEFAULT_INIT_VALUE_ENABLE) || \
+ ((VALUE) == DEFAULT_INIT_VALUE_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Input_Buffer_Format Input Buffer Format
+ * @{
+ */
+/* WARNING: CRC_INPUT_FORMAT_UNDEFINED is created for reference purposes but
+ * an error is triggered in HAL_CRC_Init() if InputDataFormat field is set
+ * to CRC_INPUT_FORMAT_UNDEFINED: the format MUST be defined by the user for
+ * the CRC APIs to provide a correct result */
+#define CRC_INPUTDATA_FORMAT_UNDEFINED ((uint32_t)0x00000000)
+#define CRC_INPUTDATA_FORMAT_BYTES ((uint32_t)0x00000001)
+#define CRC_INPUTDATA_FORMAT_HALFWORDS ((uint32_t)0x00000002)
+#define CRC_INPUTDATA_FORMAT_WORDS ((uint32_t)0x00000003)
+
+#define IS_CRC_INPUTDATA_FORMAT(FORMAT) (((FORMAT) == CRC_INPUTDATA_FORMAT_BYTES) || \
+ ((FORMAT) == CRC_INPUTDATA_FORMAT_HALFWORDS) || \
+ ((FORMAT) == CRC_INPUTDATA_FORMAT_WORDS))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup CRC_Exported_Macros CRC Exported Macros
+ * @{
+ */
+
+/** @brief Reset CRC handle state
+ * @param __HANDLE__: CRC handle.
+ * @retval None
+ */
+#define __HAL_CRC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRC_STATE_RESET)
+
+/**
+ * @brief Reset CRC Data Register.
+ * @param __HANDLE__: CRC handle
+ * @retval None.
+ */
+#define __HAL_CRC_DR_RESET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_RESET)
+
+/**
+ * @brief Set CRC INIT non-default value
+ * @param __HANDLE__ : CRC handle
+ * @param __INIT__ : 32-bit initial value
+ * @retval None.
+ */
+#define __HAL_CRC_INITIALCRCVALUE_CONFIG(__HANDLE__, __INIT__) ((__HANDLE__)->Instance->INIT = (__INIT__))
+
+/**
+ * @}
+ */
+
+
+/* Include CRC HAL Extension module */
+#include "stm32f0xx_hal_crc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CRC_Exported_Functions CRC Exported Functions
+ * @{
+ */
+
+/** @addtogroup CRC_Exported_Functions_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions.
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc);
+HAL_StatusTypeDef HAL_CRC_DeInit (CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc);
+/**
+ * @}
+ */
+
+/** @addtogroup CRC_Exported_Functions_Group2 Peripheral Control functions
+ * @brief management functions.
+ * @{
+ */
+
+/* Peripheral Control functions ***********************************************/
+uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
+uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
+/**
+ * @}
+ */
+
+/** @addtogroup CRC_Exported_Functions_Group3 Peripheral State functions
+ * @brief Peripheral State functions.
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup CRC_Exported_Constants CRC Exported Constants
+ * @brief aliases for inter STM32 series compatibility
+ * @{
+ */
+/** @defgroup CRC_Aliases Aliases for inter STM32 series compatibility
+ * @{
+ */
+/* Aliases for inter STM32 series compatibility */
+#define HAL_CRC_Input_Data_Reverse HAL_CRCEx_Input_Data_Reverse
+#define HAL_CRC_Output_Data_Reverse HAL_CRCEx_Output_Data_Reverse
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_CRC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_crc_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,202 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_crc_ex.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of CRC HAL extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_CRC_EX_H
+#define __STM32F0xx_HAL_CRC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CRCEx CRCEx Extended HAL Module Driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CRCEx_Exported_Constants CRCEx Exported Constants
+ * @{
+ */
+/** @defgroup CRCEx_Input_Data_Inversion Input Data Inversion Modes
+ * @{
+ */
+#define CRC_INPUTDATA_INVERSION_NONE ((uint32_t)0x00000000)
+#define CRC_INPUTDATA_INVERSION_BYTE ((uint32_t)CRC_CR_REV_IN_0)
+#define CRC_INPUTDATA_INVERSION_HALFWORD ((uint32_t)CRC_CR_REV_IN_1)
+#define CRC_INPUTDATA_INVERSION_WORD ((uint32_t)CRC_CR_REV_IN)
+
+#define IS_CRC_INPUTDATA_INVERSION_MODE(MODE) (((MODE) == CRC_INPUTDATA_INVERSION_NONE) || \
+ ((MODE) == CRC_INPUTDATA_INVERSION_BYTE) || \
+ ((MODE) == CRC_INPUTDATA_INVERSION_HALFWORD) || \
+ ((MODE) == CRC_INPUTDATA_INVERSION_WORD))
+/**
+ * @}
+ */
+
+/** @defgroup CRCEx_Output_Data_Inversion Output Data Inversion Modes
+ * @{
+ */
+#define CRC_OUTPUTDATA_INVERSION_DISABLED ((uint32_t)0x00000000)
+#define CRC_OUTPUTDATA_INVERSION_ENABLED ((uint32_t)CRC_CR_REV_OUT)
+
+#define IS_CRC_OUTPUTDATA_INVERSION_MODE(MODE) (((MODE) == CRC_OUTPUTDATA_INVERSION_DISABLED) || \
+ ((MODE) == CRC_OUTPUTDATA_INVERSION_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup CRCEx_Polynomial_Sizes Polynomial sizes to configure the IP
+ * @{
+ */
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#define CRC_POLYLENGTH_32B ((uint32_t)0x00000000)
+#define CRC_POLYLENGTH_16B ((uint32_t)CRC_CR_POLYSIZE_0)
+#define CRC_POLYLENGTH_8B ((uint32_t)CRC_CR_POLYSIZE_1)
+#define CRC_POLYLENGTH_7B ((uint32_t)CRC_CR_POLYSIZE)
+#define IS_CRC_POL_LENGTH(LENGTH) (((LENGTH) == CRC_POLYLENGTH_32B) || \
+ ((LENGTH) == CRC_POLYLENGTH_16B) || \
+ ((LENGTH) == CRC_POLYLENGTH_8B) || \
+ ((LENGTH) == CRC_POLYLENGTH_7B))
+#else
+#define CRC_POLYLENGTH_32B ((uint32_t)0x00000000)
+#define IS_CRC_POL_LENGTH(LENGTH) ((LENGTH) == CRC_POLYLENGTH_32B)
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+/**
+ * @}
+ */
+
+/** @defgroup CRCEx_Polynomial_Size_Definitions CRC polynomial possible sizes actual definitions
+ * @{
+ */
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#define HAL_CRC_LENGTH_32B 32
+#define HAL_CRC_LENGTH_16B 16
+#define HAL_CRC_LENGTH_8B 8
+#define HAL_CRC_LENGTH_7B 7
+#else
+#define HAL_CRC_LENGTH_32B 32
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup CRCEx_Exported_Macros CRCEx Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Set CRC output reversal
+ * @param __HANDLE__ : CRC handle
+ * @retval None.
+ */
+#define __HAL_CRC_OUTPUTREVERSAL_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_REV_OUT)
+
+/**
+ * @brief Unset CRC output reversal
+ * @param __HANDLE__ : CRC handle
+ * @retval None.
+ */
+#define __HAL_CRC_OUTPUTREVERSAL_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(CRC_CR_REV_OUT))
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/**
+ * @brief Set CRC non-default polynomial
+ * @param __HANDLE__ : CRC handle
+ * @param __POLYNOMIAL__: 7, 8, 16 or 32-bit polynomial
+ * @retval None.
+ */
+#define __HAL_CRC_POLYNOMIAL_CONFIG(__HANDLE__, __POLYNOMIAL__) ((__HANDLE__)->Instance->POL = (__POLYNOMIAL__))
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CRCEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup CRCEx_Exported_Functions_Group1 Extended Initialization/de-initialization functions
+ * @brief Extended Initialization and Configuration functions.
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_CRCEx_Init(CRC_HandleTypeDef *hcrc);
+HAL_StatusTypeDef HAL_CRCEx_Input_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t InputReverseMode);
+HAL_StatusTypeDef HAL_CRCEx_Output_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t OutputReverseMode);
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+HAL_StatusTypeDef HAL_CRCEx_Polynomial_Set(CRC_HandleTypeDef *hcrc, uint32_t Pol, uint32_t PolyLength);
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+/**
+ * @}
+ */
+/* Peripheral Control functions ***********************************************/
+/* Peripheral State and Error functions ***************************************/
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_CRC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_dac.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,354 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_dac.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of DAC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_DAC_H
+#define __STM32F0xx_HAL_DAC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DAC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup DAC_Exported_Types DAC Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_DAC_STATE_RESET = 0x00, /*!< DAC not yet initialized or disabled */
+ HAL_DAC_STATE_READY = 0x01, /*!< DAC initialized and ready for use */
+ HAL_DAC_STATE_BUSY = 0x02, /*!< DAC internal processing is ongoing */
+ HAL_DAC_STATE_TIMEOUT = 0x03, /*!< DAC timeout state */
+ HAL_DAC_STATE_ERROR = 0x04 /*!< DAC error state */
+
+}HAL_DAC_StateTypeDef;
+
+/**
+ * @brief DAC handle Structure definition
+ */
+typedef struct
+{
+ DAC_TypeDef *Instance; /*!< Register base address */
+
+ __IO HAL_DAC_StateTypeDef State; /*!< DAC communication state */
+
+ HAL_LockTypeDef Lock; /*!< DAC locking object */
+
+ DMA_HandleTypeDef *DMA_Handle1; /*!< Pointer DMA handler for channel 1 */
+
+ DMA_HandleTypeDef *DMA_Handle2; /*!< Pointer DMA handler for channel 2 */
+
+ __IO uint32_t ErrorCode; /*!< DAC Error code */
+
+}DAC_HandleTypeDef;
+
+/**
+ * @brief DAC Configuration regular Channel structure definition
+ */
+typedef struct
+{
+ uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel.
+ This parameter can be a value of @ref DAC_trigger_selection */
+
+ uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled.
+ This parameter can be a value of @ref DAC_output_buffer */
+
+}DAC_ChannelConfTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DAC_Exported_Constants DAC Exported Constants
+ * @{
+ */
+
+/** @defgroup DAC_Error_Code DAC Error Code
+ * @{
+ */
+#define HAL_DAC_ERROR_NONE 0x00 /*!< No error */
+#define HAL_DAC_ERROR_DMAUNDERRUNCH1 0x01 /*!< DAC channel1 DAM underrun error */
+#define HAL_DAC_ERROR_DMAUNDERRUNCH2 0x02 /*!< DAC channel2 DAM underrun error */
+#define HAL_DAC_ERROR_DMA 0x04 /*!< DMA error */
+/**
+ * @}
+ */
+
+/** @defgroup DAC_output_buffer DAC output buffer
+ * @{
+ */
+#define DAC_OUTPUTBUFFER_ENABLE ((uint32_t)0x00000000)
+#define DAC_OUTPUTBUFFER_DISABLE ((uint32_t)DAC_CR_BOFF1)
+
+#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OUTPUTBUFFER_ENABLE) || \
+ ((STATE) == DAC_OUTPUTBUFFER_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_data_alignement DAC data alignement
+ * @{
+ */
+#define DAC_ALIGN_12B_R ((uint32_t)0x00000000)
+#define DAC_ALIGN_12B_L ((uint32_t)0x00000004)
+#define DAC_ALIGN_8B_R ((uint32_t)0x00000008)
+
+#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_ALIGN_12B_R) || \
+ ((ALIGN) == DAC_ALIGN_12B_L) || \
+ ((ALIGN) == DAC_ALIGN_8B_R))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_data DAC data
+ * @{
+ */
+#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0)
+/**
+ * @}
+ */
+
+/** @defgroup DAC_flags_definition DAC flags definition
+ * @{
+ */
+#define DAC_FLAG_DMAUDR1 ((uint32_t)DAC_SR_DMAUDR1)
+#define DAC_FLAG_DMAUDR2 ((uint32_t)DAC_SR_DMAUDR2)
+/**
+ * @}
+ */
+
+/** @defgroup DAC_IT_definition DAC IT definition
+ * @{
+ */
+#define DAC_IT_DMAUDR1 ((uint32_t)DAC_SR_DMAUDR1)
+#define DAC_IT_DMAUDR2 ((uint32_t)DAC_SR_DMAUDR2)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup DAC_Exported_Macros DAC Exported Macros
+ * @{
+ */
+
+/** @brief Reset DAC handle state
+ * @param __HANDLE__: specifies the DAC handle.
+ * @retval None
+ */
+#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DAC_STATE_RESET)
+
+/** @brief Enable the DAC channel
+ * @param __HANDLE__: specifies the DAC handle.
+ * @param __DAC_Channel__: specifies the DAC channel
+ * @retval None
+ */
+#define __HAL_DAC_ENABLE(__HANDLE__, __DAC_Channel__) \
+((__HANDLE__)->Instance->CR |= (DAC_CR_EN1 << (__DAC_Channel__)))
+
+/** @brief Disable the DAC channel
+ * @param __HANDLE__: specifies the DAC handle
+ * @param __DAC_Channel__: specifies the DAC channel.
+ * @retval None
+ */
+#define __HAL_DAC_DISABLE(__HANDLE__, __DAC_Channel__) \
+((__HANDLE__)->Instance->CR &= ~(DAC_CR_EN1 << (__DAC_Channel__)))
+
+/** @brief Set DHR12R1 alignment
+ * @param __ALIGNEMENT__: specifies the DAC alignement
+ * @retval None
+ */
+#define __HAL_DHR12R1_ALIGNEMENT(__ALIGNEMENT__) (((uint32_t)0x00000008) + (__ALIGNEMENT__))
+
+/** @brief Set DHR12R2 alignment
+ * @param __ALIGNEMENT__: specifies the DAC alignement
+ * @retval None
+ */
+#define __HAL_DHR12R2_ALIGNEMENT(__ALIGNEMENT__) (((uint32_t)0x00000014) + (__ALIGNEMENT__))
+
+/** @brief Set DHR12RD alignment
+ * @param __ALIGNEMENT__: specifies the DAC alignement
+ * @retval None
+ */
+#define __HAL_DHR12RD_ALIGNEMENT(__ALIGNEMENT__) (((uint32_t)0x00000020) + (__ALIGNEMENT__))
+
+/** @brief Enable the DAC interrupt
+ * @param __HANDLE__: specifies the DAC handle
+ * @param __INTERRUPT__: specifies the DAC interrupt.
+ * @retval None
+ */
+#define __HAL_DAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__))
+
+/** @brief Disable the DAC interrupt
+ * @param __HANDLE__: specifies the DAC handle
+ * @param __INTERRUPT__: specifies the DAC interrupt.
+ * @retval None
+ */
+#define __HAL_DAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__))
+
+/** @brief Get the selected DAC's flag status.
+ * @param __HANDLE__: specifies the DAC handle.
+ * @param __FLAG__: specifies the FLAG.
+ * @retval None
+ */
+#define __HAL_DAC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the DAC's flag.
+ * @param __HANDLE__: specifies the DAC handle.
+ * @param __FLAG__: specifies the FLAG.
+ * @retval None
+ */
+#define __HAL_DAC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = (__FLAG__))
+
+/**
+ * @}
+ */
+
+
+/* Include DAC HAL Extension module */
+#include "stm32f0xx_hal_dac_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup DAC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup DAC_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef* hdac);
+HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef* hdac);
+void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac);
+void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac);
+
+/**
+ * @}
+ */
+
+/** @addtogroup DAC_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef* hdac, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t* pData, uint32_t Length, uint32_t Alignment);
+HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel);
+
+void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef* hdac);
+void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef* hdac);
+void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac);
+void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac);
+/**
+ * @}
+ */
+
+/** @addtogroup DAC_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data);
+uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup DAC_Exported_Functions_Group4
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef* hdac);
+void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac);
+uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /*__STM32F0xx_HAL_DAC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_dac_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,297 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_dac_ex.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of DAC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_DAC_EX_H
+#define __STM32F0xx_HAL_DAC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DACEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL State structures definition
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DACEx_Exported_Constants DACEx Exported Constants
+ * @{
+ */
+/** @defgroup DACEx_wave_generation DACEx wave generation
+ * @{
+ */
+#define DAC_WAVEGENERATION_NONE ((uint32_t)0x00000000)
+#define DAC_WAVEGENERATION_NOISE ((uint32_t)DAC_CR_WAVE1_0)
+#define DAC_WAVEGENERATION_TRIANGLE ((uint32_t)DAC_CR_WAVE1_1)
+
+#define IS_DAC_GENERATE_WAVE(WAVE) (((WAVE) == DAC_WAVEGENERATION_NONE) || \
+ ((WAVE) == DAC_WAVEGENERATION_NOISE) || \
+ ((WAVE) == DAC_WAVEGENERATION_TRIANGLE))
+/**
+ * @}
+ */
+
+/** @defgroup DACEx_lfsrunmask_triangleamplitude DACEx lfsrunmask triangleamplitude
+ * @{
+ */
+#define DAC_LFSRUNMASK_BIT0 ((uint32_t)0x00000000) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */
+#define DAC_LFSRUNMASK_BITS1_0 ((uint32_t)DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS2_0 ((uint32_t)DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS3_0 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0)/*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS4_0 ((uint32_t)DAC_CR_MAMP1_2) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS5_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS6_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS7_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS8_0 ((uint32_t)DAC_CR_MAMP1_3) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS9_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS10_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS11_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */
+#define DAC_TRIANGLEAMPLITUDE_1 ((uint32_t)0x00000000) /*!< Select max triangle amplitude of 1 */
+#define DAC_TRIANGLEAMPLITUDE_3 ((uint32_t)DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 3 */
+#define DAC_TRIANGLEAMPLITUDE_7 ((uint32_t)DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 7 */
+#define DAC_TRIANGLEAMPLITUDE_15 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 15 */
+#define DAC_TRIANGLEAMPLITUDE_31 ((uint32_t)DAC_CR_MAMP1_2) /*!< Select max triangle amplitude of 31 */
+#define DAC_TRIANGLEAMPLITUDE_63 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 63 */
+#define DAC_TRIANGLEAMPLITUDE_127 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 127 */
+#define DAC_TRIANGLEAMPLITUDE_255 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 255 */
+#define DAC_TRIANGLEAMPLITUDE_511 ((uint32_t)DAC_CR_MAMP1_3) /*!< Select max triangle amplitude of 511 */
+#define DAC_TRIANGLEAMPLITUDE_1023 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 1023 */
+#define DAC_TRIANGLEAMPLITUDE_2047 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 2047 */
+#define DAC_TRIANGLEAMPLITUDE_4095 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 4095 */
+
+#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUNMASK_BIT0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS1_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS2_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS3_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS4_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS5_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS6_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS7_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS8_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS9_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS10_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS11_0) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_1) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_3) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_7) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_15) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_31) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_63) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_127) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_255) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_511) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_1023) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_2047) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_4095))
+/**
+ * @}
+ */
+
+/** @defgroup DACEx_wave_generationbis DACEx wave generation bis
+ * @{
+ */
+#define DAC_WAVE_NOISE ((uint32_t)DAC_CR_WAVE1_0)
+#define DAC_WAVE_TRIANGLE ((uint32_t)DAC_CR_WAVE1_1)
+
+#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NOISE) || \
+ ((WAVE) == DAC_WAVE_TRIANGLE))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup DACEx_Exported_Macros DACEx Exported Macros
+ * @{
+ */
+
+/** @defgroup DAC_trigger_selection DAC trigger selection
+ * @{
+ */
+#if defined(STM32F051x8) || defined(STM32F058xx)
+
+#define DAC_TRIGGER_NONE ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
+ has been loaded, and not by external trigger */
+#define DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T3_TRGO ((uint32_t)(DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T6_TRGO ((uint32_t)DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T15_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM15 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
+ ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T3_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T15_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+ ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+
+#endif /* STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define DAC_TRIGGER_NONE ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
+ has been loaded, and not by external trigger */
+#define DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T3_TRGO ((uint32_t)(DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T6_TRGO ((uint32_t)DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T7_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T15_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM15 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
+ ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T3_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T15_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+ ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+/**
+ * @}
+ */
+
+/** @defgroup DAC_Channel_selection DAC Channel selection
+ * @{
+ */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define DAC_CHANNEL_1 ((uint32_t)0x00000000)
+#define DAC_CHANNEL_2 ((uint32_t)0x00000010)
+
+#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1) || \
+ ((CHANNEL) == DAC_CHANNEL_2))
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F051x8) || defined(STM32F058xx)
+
+#define DAC_CHANNEL_1 ((uint32_t)0x00000000)
+#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1))
+
+#endif /* STM32F051x8 || STM32F058xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/* Extension features functions ***********************************************/
+
+/** @addtogroup DACEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup DACEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ * @{
+ */
+
+uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac);
+HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude);
+HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude);
+HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2);
+
+void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef* hdac);
+
+void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma);
+void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma);
+void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+#endif /* */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#endif /*__STM32F0xx_HAL_DAC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_def.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,183 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_def.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief This file contains HAL common defines, enumeration, macros and
+ * structures definitions.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_DEF
+#define __STM32F0xx_HAL_DEF
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL Status structures definition
+ */
+typedef enum
+{
+ HAL_OK = 0x00,
+ HAL_ERROR = 0x01,
+ HAL_BUSY = 0x02,
+ HAL_TIMEOUT = 0x03
+} HAL_StatusTypeDef;
+
+/**
+ * @brief HAL Lock structures definition
+ */
+typedef enum
+{
+ HAL_UNLOCKED = 0x00,
+ HAL_LOCKED = 0x01
+} HAL_LockTypeDef;
+
+/* Exported macro ------------------------------------------------------------*/
+#ifndef NULL
+ #define NULL 0
+#endif
+
+#define HAL_MAX_DELAY 0xFFFFFFFF
+
+#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) != RESET)
+#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == RESET)
+
+#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD_, __DMA_HANDLE_) \
+ do{ \
+ (__HANDLE__)->__PPP_DMA_FIELD_ = &(__DMA_HANDLE_); \
+ (__DMA_HANDLE_).Parent = (__HANDLE__); \
+ } while(0)
+
+#define UNUSED(x) ((void)(x))
+
+/** @brief Reset the Handle's State field.
+ * @param __HANDLE__: specifies the Peripheral Handle.
+ * @note This macro can be used for the following purpose:
+ * - When the Handle is declared as local variable; before passing it as parameter
+ * to HAL_PPP_Init() for the first time, it is mandatory to use this macro
+ * to set to 0 the Handle's "State" field.
+ * Otherwise, "State" field may have any random value and the first time the function
+ * HAL_PPP_Init() is called, the low level hardware initialization will be missed
+ * (i.e. HAL_PPP_MspInit() will not be executed).
+ * - When there is a need to reconfigure the low level hardware: instead of calling
+ * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
+ * In this later function, when the Handle's "State" field is set to 0, it will execute the function
+ * HAL_PPP_MspInit() which will reconfigure the low level hardware.
+ * @retval None
+ */
+#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0)
+
+#if (USE_RTOS == 1)
+ #error " USE_RTOS should be 0 in the current HAL release "
+#else
+ #define __HAL_LOCK(__HANDLE__) \
+ do{ \
+ if((__HANDLE__)->Lock == HAL_LOCKED) \
+ { \
+ return HAL_BUSY; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Lock = HAL_LOCKED; \
+ } \
+ }while (0)
+
+ #define __HAL_UNLOCK(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Lock = HAL_UNLOCKED; \
+ }while (0)
+#endif /* USE_RTOS */
+
+#if defined ( __GNUC__ )
+ #ifndef __weak
+ #define __weak __attribute__((weak))
+ #endif /* __weak */
+ #ifndef __packed
+ #define __packed __attribute__((__packed__))
+ #endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
+#if defined (__GNUC__) /* GNU Compiler */
+ #ifndef __ALIGN_END
+ #define __ALIGN_END __attribute__ ((aligned (4)))
+ #endif /* __ALIGN_END */
+ #ifndef __ALIGN_BEGIN
+ #define __ALIGN_BEGIN
+ #endif /* __ALIGN_BEGIN */
+#else
+ #ifndef __ALIGN_END
+ #define __ALIGN_END
+ #endif /* __ALIGN_END */
+ #ifndef __ALIGN_BEGIN
+ #if defined (__CC_ARM) /* ARM Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #elif defined (__ICCARM__) /* IAR Compiler */
+ #define __ALIGN_BEGIN
+ #endif /* __CC_ARM */
+ #endif /* __ALIGN_BEGIN */
+#endif /* __GNUC__ */
+
+/**
+ * @brief __NOINLINE definition
+ */
+#if defined ( __CC_ARM ) || defined ( __GNUC__ )
+/* ARM & GNUCompiler
+ ----------------
+*/
+#define __NOINLINE __attribute__ ( (noinline) )
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+ ---------------
+*/
+#define __NOINLINE _Pragma("optimize = no_inline")
+
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32F0xx_HAL_DEF */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_dma.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,459 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_dma.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of DMA HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_DMA_H
+#define __STM32F0xx_HAL_DMA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMA
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DMA_Exported_Types DMA Exported Types
+ * @{
+ */
+
+/**
+ * @brief DMA Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
+ from memory to memory or from peripheral to memory.
+ This parameter can be a value of @ref DMA_Data_transfer_direction */
+
+ uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Peripheral_incremented_mode */
+
+ uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Memory_incremented_mode */
+
+ uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width.
+ This parameter can be a value of @ref DMA_Peripheral_data_size */
+
+ uint32_t MemDataAlignment; /*!< Specifies the Memory data width.
+ This parameter can be a value of @ref DMA_Memory_data_size */
+
+ uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx.
+ This parameter can be a value of @ref DMA_mode
+ @note The circular buffer mode cannot be used if the memory-to-memory
+ data transfer is configured on the selected Channel */
+
+ uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx.
+ This parameter can be a value of @ref DMA_Priority_level */
+
+} DMA_InitTypeDef;
+
+/**
+ * @brief DMA Configuration enumeration values definition
+ */
+typedef enum
+{
+ DMA_MODE = 0, /*!< Control related DMA mode Parameter in DMA_InitTypeDef */
+ DMA_PRIORITY = 1, /*!< Control related priority level Parameter in DMA_InitTypeDef */
+
+} DMA_ControlTypeDef;
+
+/**
+ * @brief HAL DMA State structures definition
+ */
+typedef enum
+{
+ HAL_DMA_STATE_RESET = 0x00, /*!< DMA not yet initialized or disabled */
+ HAL_DMA_STATE_READY = 0x01, /*!< DMA process success and ready for use */
+ HAL_DMA_STATE_READY_HALF = 0x11, /*!< DMA Half process success */
+ HAL_DMA_STATE_BUSY = 0x02, /*!< DMA process is ongoing */
+ HAL_DMA_STATE_TIMEOUT = 0x03, /*!< DMA timeout state */
+ HAL_DMA_STATE_ERROR = 0x04, /*!< DMA error state */
+
+}HAL_DMA_StateTypeDef;
+
+/**
+ * @brief HAL DMA Error Code structure definition
+ */
+typedef enum
+{
+ HAL_DMA_FULL_TRANSFER = 0x00, /*!< Full transfer */
+ HAL_DMA_HALF_TRANSFER = 0x01, /*!< Half Transfer */
+
+}HAL_DMA_LevelCompleteTypeDef;
+
+
+/**
+ * @brief DMA handle Structure definition
+ */
+typedef struct __DMA_HandleTypeDef
+{
+ DMA_Channel_TypeDef *Instance; /*!< Register base address */
+
+ DMA_InitTypeDef Init; /*!< DMA communication parameters */
+
+ HAL_LockTypeDef Lock; /*!< DMA locking object */
+
+ HAL_DMA_StateTypeDef State; /*!< DMA transfer state */
+
+ void *Parent; /*!< Parent object state */
+
+ void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */
+
+ void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */
+
+ void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */
+
+ __IO uint32_t ErrorCode; /*!< DMA Error code */
+
+} DMA_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DMA_Exported_Constants DMA Exported Constants
+ * @{
+ */
+
+/** @defgroup DMA_Error_Code DMA Error Code
+ * @{
+ */
+#define HAL_DMA_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_DMA_ERROR_TE ((uint32_t)0x00000001) /*!< Transfer error */
+#define HAL_DMA_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction
+ * @{
+ */
+#define DMA_PERIPH_TO_MEMORY ((uint32_t)0x00000000) /*!< Peripheral to memory direction */
+#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_CCR_DIR) /*!< Memory to peripheral direction */
+#define DMA_MEMORY_TO_MEMORY ((uint32_t)(DMA_CCR_MEM2MEM)) /*!< Memory to memory direction */
+
+#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
+ ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \
+ ((DIRECTION) == DMA_MEMORY_TO_MEMORY))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Data_buffer_size DMA Data buffer size
+ * @{
+ */
+#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode
+ * @{
+ */
+#define DMA_PINC_ENABLE ((uint32_t)DMA_CCR_PINC) /*!< Peripheral increment mode Enable */
+#define DMA_PINC_DISABLE ((uint32_t)0x00000000) /*!< Peripheral increment mode Disable */
+
+#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
+ ((STATE) == DMA_PINC_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode
+ * @{
+ */
+#define DMA_MINC_ENABLE ((uint32_t)DMA_CCR_MINC) /*!< Memory increment mode Enable */
+#define DMA_MINC_DISABLE ((uint32_t)0x00000000) /*!< Memory increment mode Disable */
+
+#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \
+ ((STATE) == DMA_MINC_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size
+ * @{
+ */
+#define DMA_PDATAALIGN_BYTE ((uint32_t)0x00000000) /*!< Peripheral data alignment : Byte */
+#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_PSIZE_0) /*!< Peripheral data alignment : HalfWord */
+#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_CCR_PSIZE_1) /*!< Peripheral data alignment : Word */
+
+#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_PDATAALIGN_WORD))
+/**
+ * @}
+ */
+
+
+/** @defgroup DMA_Memory_data_size DMA Memory data size
+ * @{
+ */
+#define DMA_MDATAALIGN_BYTE ((uint32_t)0x00000000) /*!< Memory data alignment : Byte */
+#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_MSIZE_0) /*!< Memory data alignment : HalfWord */
+#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_CCR_MSIZE_1) /*!< Memory data alignment : Word */
+
+#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_MDATAALIGN_WORD ))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_mode DMA mode
+ * @{
+ */
+#define DMA_NORMAL ((uint32_t)0x00000000) /*!< Normal Mode */
+#define DMA_CIRCULAR ((uint32_t)DMA_CCR_CIRC) /*!< Circular Mode */
+
+#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \
+ ((MODE) == DMA_CIRCULAR))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Priority_level DMA Priority level
+ * @{
+ */
+#define DMA_PRIORITY_LOW ((uint32_t)0x00000000) /*!< Priority level : Low */
+#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_CCR_PL_0) /*!< Priority level : Medium */
+#define DMA_PRIORITY_HIGH ((uint32_t)DMA_CCR_PL_1) /*!< Priority level : High */
+#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_CCR_PL) /*!< Priority level : Very_High */
+
+#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \
+ ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
+ ((PRIORITY) == DMA_PRIORITY_HIGH) || \
+ ((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
+/**
+ * @}
+ */
+
+
+/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions
+ * @{
+ */
+
+#define DMA_IT_TC ((uint32_t)DMA_CCR_TCIE)
+#define DMA_IT_HT ((uint32_t)DMA_CCR_HTIE)
+#define DMA_IT_TE ((uint32_t)DMA_CCR_TEIE)
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_flag_definitions DMA flag definitions
+ * @{
+ */
+
+#define DMA_FLAG_GL1 ((uint32_t)0x00000001) /*!< Channel 1 global interrupt flag */
+#define DMA_FLAG_TC1 ((uint32_t)0x00000002) /*!< Channel 1 transfer complete flag */
+#define DMA_FLAG_HT1 ((uint32_t)0x00000004) /*!< Channel 1 half transfer flag */
+#define DMA_FLAG_TE1 ((uint32_t)0x00000008) /*!< Channel 1 transfer error flag */
+#define DMA_FLAG_GL2 ((uint32_t)0x00000010) /*!< Channel 2 global interrupt flag */
+#define DMA_FLAG_TC2 ((uint32_t)0x00000020) /*!< Channel 2 transfer complete flag */
+#define DMA_FLAG_HT2 ((uint32_t)0x00000040) /*!< Channel 2 half transfer flag */
+#define DMA_FLAG_TE2 ((uint32_t)0x00000080) /*!< Channel 2 transfer error flag */
+#define DMA_FLAG_GL3 ((uint32_t)0x00000100) /*!< Channel 3 global interrupt flag */
+#define DMA_FLAG_TC3 ((uint32_t)0x00000200) /*!< Channel 3 transfer complete flag */
+#define DMA_FLAG_HT3 ((uint32_t)0x00000400) /*!< Channel 3 half transfer flag */
+#define DMA_FLAG_TE3 ((uint32_t)0x00000800) /*!< Channel 3 transfer error flag */
+#define DMA_FLAG_GL4 ((uint32_t)0x00001000) /*!< Channel 4 global interrupt flag */
+#define DMA_FLAG_TC4 ((uint32_t)0x00002000) /*!< Channel 4 transfer complete flag */
+#define DMA_FLAG_HT4 ((uint32_t)0x00004000) /*!< Channel 4 half transfer flag */
+#define DMA_FLAG_TE4 ((uint32_t)0x00008000) /*!< Channel 4 transfer error flag */
+#define DMA_FLAG_GL5 ((uint32_t)0x00010000) /*!< Channel 5 global interrupt flag */
+#define DMA_FLAG_TC5 ((uint32_t)0x00020000) /*!< Channel 5 transfer complete flag */
+#define DMA_FLAG_HT5 ((uint32_t)0x00040000) /*!< Channel 5 half transfer flag */
+#define DMA_FLAG_TE5 ((uint32_t)0x00080000) /*!< Channel 5 transfer error flag */
+#define DMA_FLAG_GL6 ((uint32_t)0x00100000) /*!< Channel 6 global interrupt flag */
+#define DMA_FLAG_TC6 ((uint32_t)0x00200000) /*!< Channel 6 transfer complete flag */
+#define DMA_FLAG_HT6 ((uint32_t)0x00400000) /*!< Channel 6 half transfer flag */
+#define DMA_FLAG_TE6 ((uint32_t)0x00800000) /*!< Channel 6 transfer error flag */
+#define DMA_FLAG_GL7 ((uint32_t)0x01000000) /*!< Channel 7 global interrupt flag */
+#define DMA_FLAG_TC7 ((uint32_t)0x02000000) /*!< Channel 7 transfer complete flag */
+#define DMA_FLAG_HT7 ((uint32_t)0x04000000) /*!< Channel 7 half transfer flag */
+#define DMA_FLAG_TE7 ((uint32_t)0x08000000) /*!< Channel 7 transfer error flag */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup DMA_Exported_Macros DMA Exported Macros
+ * @{
+ */
+
+/** @brief Reset DMA handle state
+ * @param __HANDLE__: DMA handle.
+ * @retval None
+ */
+#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
+
+/**
+ * @brief Enable the specified DMA Channel.
+ * @param __HANDLE__: DMA handle
+ * @retval None.
+ */
+#define __HAL_DMA_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CCR, DMA_CCR_EN))
+
+/**
+ * @brief Disable the specified DMA Channel.
+ * @param __HANDLE__: DMA handle
+ * @retval None.
+ */
+#define __HAL_DMA_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CCR, DMA_CCR_EN))
+
+
+/* Interrupt & Flag management */
+
+/**
+ * @brief Enables the specified DMA Channel interrupts.
+ * @param __HANDLE__: DMA handle
+ * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask
+ * @arg DMA_IT_TE: Transfer error interrupt mask
+ * @retval None
+ */
+#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (SET_BIT((__HANDLE__)->Instance->CCR, (__INTERRUPT__)))
+
+/**
+ * @brief Disables the specified DMA Channel interrupts.
+ * @param __HANDLE__: DMA handle
+ * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask
+ * @arg DMA_IT_TE: Transfer error interrupt mask
+ * @retval None
+ */
+#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (CLEAR_BIT((__HANDLE__)->Instance->CCR , (__INTERRUPT__)))
+
+/**
+ * @brief Checks whether the specified DMA Channel interrupt has occurred or not.
+ * @param __HANDLE__: DMA handle
+ * @param __INTERRUPT__: specifies the DMA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask
+ * @arg DMA_IT_TE: Transfer error interrupt mask
+ * @retval The state of DMA_IT (SET or RESET).
+ */
+#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CCR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+ * @}
+ */
+
+/* Include DMA HAL Extension module */
+#include "stm32f0xx_hal_dma_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DMA_Exported_Functions DMA Exported Functions
+ * @{
+ */
+/** @addtogroup DMA_Exported_Functions_Group1
+ * @brief Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/** @addtogroup DMA_Exported_Functions_Group2
+ * @brief I/O operation functions
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout);
+void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/* Peripheral State and Error functions ***************************************/
+/** @addtogroup DMA_Exported_Functions_Group3
+ * @brief Peripheral State functions
+ * @{
+ */
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
+uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_dma_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,783 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_dma_ex.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of DMA HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_DMA_EX_H
+#define __STM32F0xx_HAL_DMA_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMAEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+/** @defgroup DMAEx_Exported_Constants DMAEx Exported Constants
+ * @{
+ */
+#define DMA1_CHANNEL1_RMP 0x00000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL2_RMP 0x10000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL3_RMP 0x20000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL4_RMP 0x30000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL5_RMP 0x40000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#if !defined(STM32F030xC)
+#define DMA1_CHANNEL6_RMP 0x50000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL7_RMP 0x60000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL1_RMP 0x00000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL2_RMP 0x10000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL3_RMP 0x20000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL4_RMP 0x30000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL5_RMP 0x40000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#endif /* !defined(STM32F030xC) */
+
+/****************** DMA1 remap bit field definition********************/
+/* DMA1 - Channel 1 */
+#define HAL_DMA1_CH1_DEFAULT (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH1_ADC (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_ADC) /*!< Remap ADC on DMA1 Channel 1*/
+#define HAL_DMA1_CH1_TIM17_CH1 (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 1 */
+#define HAL_DMA1_CH1_TIM17_UP (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART1_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART2_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART3_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART4_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART5_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART6_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 1 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH1_USART7_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART8_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 1 */
+#endif /* !defined(STM32F030xC) */
+
+/* DMA1 - Channel 2 */
+#define HAL_DMA1_CH2_DEFAULT (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH2_ADC (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_ADC) /*!< Remap ADC on DMA1 channel 2 */
+#define HAL_DMA1_CH2_I2C1_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_SPI1_RX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_SPI1_RX) /*!< Remap SPI1 Rx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_TIM1_CH1 (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM1_CH1) /*!< Remap TIM1 channel 1 on DMA1 channel 2 */
+#define HAL_DMA1_CH2_TIM17_CH1 (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 2 */
+#define HAL_DMA1_CH2_TIM17_UP (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART1_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART2_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART3_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART4_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART5_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART6_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 2 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH2_USART7_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART8_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 2 */
+#endif /* !defined(STM32F030xC) */
+
+/* DMA1 - Channel 3 */
+#define HAL_DMA1_CH3_DEFAULT (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH3_TIM6_UP (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA1 channel 3 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH3_DAC_CH1 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_DAC_CH1) /*!< Remap DAC Channel 1on DMA1 channel 3 */
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH3_I2C1_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_SPI1_TX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_SPI1_TX) /*!< Remap SPI1 Tx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_TIM1_CH2 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM1_CH2) /*!< Remap TIM1 channel 2 on DMA1 channel 3 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH3_TIM2_CH2 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM2_CH2) /*!< Remap TIM2 channel 2 on DMA1 channel 3 */
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH3_TIM16_CH1 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 3 */
+#define HAL_DMA1_CH3_TIM16_UP (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART1_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART2_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART3_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART4_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART5_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART6_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 3 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH3_USART7_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART8_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 3 */
+#endif /* !defined(STM32F030xC) */
+
+/* DMA1 - Channel 4 */
+#define HAL_DMA1_CH4_DEFAULT (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH4_TIM7_UP (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA1 channel 4 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH4_DAC_CH2 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_DAC_CH2) /*!< Remap DAC Channel 2 on DMA1 channel 4 */
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH4_I2C2_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_I2C2_TX) /*!< Remap I2C2 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_SPI2_RX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 4 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH4_TIM2_CH4 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM2_CH4) /*!< Remap TIM2 channel 4 on DMA1 channel 4 */
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH4_TIM3_CH1 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM3_CH1) /*!< Remap TIM3 channel 1 on DMA1 channel 4 */
+#define HAL_DMA1_CH4_TIM3_TRIG (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 4 */
+#define HAL_DMA1_CH4_TIM16_CH1 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 4 */
+#define HAL_DMA1_CH4_TIM16_UP (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART1_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART2_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART3_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART4_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART5_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART6_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 4 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH4_USART7_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART8_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 4 */
+#endif /* !defined(STM32F030xC) */
+
+/* DMA1 - Channel 5 */
+#define HAL_DMA1_CH5_DEFAULT (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH5_I2C2_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_I2C2_RX) /*!< Remap I2C2 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_SPI2_TX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_SPI2_TX) /*!< Remap SPI1 Tx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_TIM1_CH3 (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_TIM1_CH3) /*!< Remap TIM1 channel 3 on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART1_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART2_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART3_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART4_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART5_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART6_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 5 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH5_USART7_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART8_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 5 */
+#endif /* !defined(STM32F030xC) */
+
+#if !defined(STM32F030xC)
+/* DMA1 - Channel 6 */
+#define HAL_DMA1_CH6_DEFAULT (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH6_I2C1_TX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_SPI2_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM1_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH1) /*!< Remap TIM1 channel 1 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM1_CH2 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH2) /*!< Remap TIM1 channel 2 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM1_CH3 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH3) /*!< Remap TIM1 channel 3 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM3_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM3_CH1) /*!< Remap TIM3 channel 1 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM3_TRIG (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM16_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM16_UP (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART1_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART2_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART3_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART4_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART5_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART6_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART7_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART8_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 6 */
+/* DMA1 - Channel 7 */
+#define HAL_DMA1_CH7_DEFAULT (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH7_I2C1_RX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_SPI2_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_SPI2_TX) /*!< Remap SPI2 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_TIM2_CH2 (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM2_CH2) /*!< Remap TIM2 channel 2 on DMA1 channel 7 */
+#define HAL_DMA1_CH7_TIM2_CH4 (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM2_CH4) /*!< Remap TIM2 channel 4 on DMA1 channel 7 */
+#define HAL_DMA1_CH7_TIM17_CH1 (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 7 */
+#define HAL_DMA1_CH7_TIM17_UP (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART1_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART2_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART3_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART4_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART5_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART6_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART7_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART8_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 7 */
+
+/****************** DMA2 remap bit field definition********************/
+/* DMA2 - Channel 1 */
+#define HAL_DMA2_CH1_DEFAULT (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH1_I2C2_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_I2C2_TX) /*!< Remap I2C2 TX on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART1_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART2_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART3_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART4_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART5_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART6_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART7_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART8_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 1 */
+/* DMA2 - Channel 2 */
+#define HAL_DMA2_CH2_DEFAULT (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH2_I2C2_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_I2C2_RX) /*!< Remap I2C2 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART1_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART2_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART3_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART4_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART5_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART6_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART7_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART8_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 2 */
+/* DMA2 - Channel 3 */
+#define HAL_DMA2_CH3_DEFAULT (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH3_TIM6_UP (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA2 channel 3 */
+#define HAL_DMA2_CH3_DAC_CH1 (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_DAC_CH1) /*!< Remap DAC channel 1 on DMA2 channel 3 */
+#define HAL_DMA2_CH3_SPI1_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_SPI1_RX) /*!< Remap SPI1 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART1_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART2_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART3_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART4_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART5_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART6_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART7_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART8_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 3 */
+/* DMA2 - Channel 4 */
+#define HAL_DMA2_CH4_DEFAULT (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH4_TIM7_UP (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA2 channel 4 */
+#define HAL_DMA2_CH4_DAC_CH2 (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_DAC_CH2) /*!< Remap DAC channel 2 on DMA2 channel 4 */
+#define HAL_DMA2_CH4_SPI1_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_SPI1_TX) /*!< Remap SPI1 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART1_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART2_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART3_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART4_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART5_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART6_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART7_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART8_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 4 */
+/* DMA2 - Channel 5 */
+#define HAL_DMA2_CH5_DEFAULT (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH5_ADC (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_ADC) /*!< Remap ADC on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART1_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART2_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART3_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART4_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART5_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART6_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART7_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART8_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 5 */
+#endif /* !defined(STM32F030xC) */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+#define IS_HAL_DMA1_REMAP(REQUEST) (((REQUEST) == HAL_DMA1_CH1_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH1_ADC) ||\
+ ((REQUEST) == HAL_DMA1_CH1_TIM17_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH1_TIM17_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART7_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART8_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH2_ADC) ||\
+ ((REQUEST) == HAL_DMA1_CH2_I2C1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_SPI1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_TIM1_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH2_I2C1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_TIM17_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH2_TIM17_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART7_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART8_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM6_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH3_DAC_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH3_I2C1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_SPI1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM1_CH2) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM2_CH2) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM16_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM16_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART7_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART8_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM7_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH4_DAC_CH2) ||\
+ ((REQUEST) == HAL_DMA1_CH4_I2C2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_SPI2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM2_CH4) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM3_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM3_TRIG) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM16_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM16_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART7_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART8_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH5_I2C2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_SPI2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_TIM1_CH3) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART7_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART8_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH6_I2C1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_SPI2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_TIM1_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH6_TIM1_CH2) ||\
+ ((REQUEST) == HAL_DMA1_CH6_TIM1_CH3) ||\
+ ((REQUEST) == HAL_DMA1_CH6_TIM3_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH6_TIM3_TRIG) ||\
+ ((REQUEST) == HAL_DMA1_CH6_TIM16_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH6_TIM16_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH6_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_USART7_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH6_USART8_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH7_I2C1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_SPI2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_TIM2_CH2) ||\
+ ((REQUEST) == HAL_DMA1_CH7_TIM2_CH4) ||\
+ ((REQUEST) == HAL_DMA1_CH7_TIM17_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH7_TIM17_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH7_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_USART7_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH7_USART8_TX))
+
+#define IS_HAL_DMA2_REMAP(REQUEST) (((REQUEST) == HAL_DMA2_CH1_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA2_CH1_I2C2_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH1_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH1_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH1_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH1_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH1_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH1_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH1_USART7_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH1_USART8_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH2_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA2_CH2_I2C2_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH2_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH2_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH2_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH2_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH2_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH2_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH2_USART7_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH2_USART8_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH3_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA2_CH3_TIM6_UP) ||\
+ ((REQUEST) == HAL_DMA2_CH3_DAC_CH1) ||\
+ ((REQUEST) == HAL_DMA2_CH3_SPI1_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH3_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH3_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH3_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH3_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH3_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH3_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH3_USART7_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH3_USART8_RX) ||\
+ ((REQUEST) == HAL_DMA2_CH4_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA2_CH4_TIM7_UP) ||\
+ ((REQUEST) == HAL_DMA2_CH4_DAC_CH2) ||\
+ ((REQUEST) == HAL_DMA2_CH4_SPI1_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH4_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH4_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH4_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH4_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH4_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH4_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH4_USART7_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH4_USART8_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH5_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA2_CH5_ADC) ||\
+ ((REQUEST) == HAL_DMA2_CH5_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH5_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH5_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH5_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH5_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH5_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH5_USART7_TX) ||\
+ ((REQUEST) == HAL_DMA2_CH5_USART8_TX ))
+#endif /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F030xC)
+#define IS_HAL_DMA1_REMAP(REQUEST) (((REQUEST) == HAL_DMA1_CH1_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH1_ADC) ||\
+ ((REQUEST) == HAL_DMA1_CH1_TIM17_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH1_TIM17_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH2_ADC) ||\
+ ((REQUEST) == HAL_DMA1_CH2_I2C1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_SPI1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_TIM1_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH2_I2C1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_TIM17_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH2_TIM17_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM6_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH3_I2C1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_SPI1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM1_CH2) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM16_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM16_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM7_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH4_I2C2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_SPI2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM3_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM3_TRIG) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM16_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM16_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH5_I2C2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_SPI2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_TIM1_CH3) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART6_RX))
+#endif /* STM32F030xC */
+
+/**
+ * @}
+ */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup DMAEx_Exported_Macros DMAEx Exported Macros
+ * @{
+ */
+/* Interrupt & Flag management */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+/**
+ * @brief Returns the current DMA Channel transfer complete flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified transfer complete flag index.
+ */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\
+ DMA_FLAG_TC7)
+
+/**
+ * @brief Returns the current DMA Channel half transfer complete flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified half transfer complete flag index.
+ */
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\
+ DMA_FLAG_HT7)
+
+/**
+ * @brief Returns the current DMA Channel transfer error flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\
+ DMA_FLAG_TE7)
+
+/**
+ * @brief Get the DMA Channel pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 1_7 to select the DMA Channel flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__))
+
+/**
+ * @brief Clears the DMA Channel pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 1_7 to select the DMA Channel flag.
+ * @retval None
+ */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__))
+
+#elif defined(STM32F091xC) || defined(STM32F098xx)
+/**
+ * @brief Returns the current DMA Channel transfer complete flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified transfer complete flag index.
+ */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TC7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TC4 :\
+ DMA_FLAG_TC5)
+
+/**
+ * @brief Returns the current DMA Channel half transfer complete flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified half transfer complete flag index.
+ */
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_HT7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_HT4 :\
+ DMA_FLAG_HT5)
+
+/**
+ * @brief Returns the current DMA Channel transfer error flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TE7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TE4 :\
+ DMA_FLAG_TE5)
+
+/**
+ * @brief Get the DMA Channel pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->ISR & (__FLAG__)) :\
+ (DMA1->ISR & (__FLAG__)))
+
+/**
+ * @brief Clears the DMA Channel pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag.
+ * @retval None
+ */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->IFCR = (__FLAG__)) :\
+ (DMA1->IFCR = (__FLAG__)))
+
+#else /* STM32F030x8_STM32F030xC_STM32F031x6_STM32F038xx_STM32F051x8_STM32F058xx_STM32F070x6_STM32F070xB Product devices */
+/**
+ * @brief Returns the current DMA Channel transfer complete flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified transfer complete flag index.
+ */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
+ DMA_FLAG_TC5)
+
+/**
+ * @brief Returns the current DMA Channel half transfer complete flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified half transfer complete flag index.
+ */
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
+ DMA_FLAG_HT5)
+
+/**
+ * @brief Returns the current DMA Channel transfer error flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
+ DMA_FLAG_TE5)
+
+/**
+ * @brief Get the DMA Channel pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 1_5 to select the DMA Channel flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__))
+
+/**
+ * @brief Clears the DMA Channel pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 1_5 to select the DMA Channel flag.
+ * @retval None
+ */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR = (__FLAG__))
+
+#endif
+
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+#define __HAL_DMA1_REMAP(__REQUEST__) \
+ do { assert_param(IS_HAL_DMA1_REMAP(__REQUEST__)); \
+ DMA1->CSELR &= ~((uint32_t)0x0F << (uint32_t)(((__REQUEST__) >> 28) * 4)); \
+ DMA1->CSELR |= (uint32_t)((__REQUEST__) & 0x0FFFFFFF); \
+ }while(0)
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+#define __HAL_DMA2_REMAP(__REQUEST__) \
+ do { assert_param(IS_HAL_DMA2_REMAP(__REQUEST__)); \
+ DMA2->CSELR &= ~((uint32_t)0x0F << (uint32_t)(((__REQUEST__) >> 28) * 4)); \
+ DMA2->CSELR |= (uint32_t)((__REQUEST__) & 0x0FFFFFFF); \
+ }while(0)
+#endif /* STM32F091xC || STM32F098xx */
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_DMA_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_flash.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,515 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_flash.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of Flash HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_FLASH_H
+#define __STM32F0xx_HAL_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASH
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup FLASH_Exported_Types FLASH Exported Types
+ * @{
+ */
+
+/**
+ * @brief FLASH Erase structure definition
+ */
+typedef struct
+{
+ uint32_t TypeErase; /*!< TypeErase: Mass erase or page erase.
+ This parameter can be a value of @ref FLASH_Type_Erase */
+
+ uint32_t PageAddress; /*!< PageAdress: Initial FLASH page address to erase when mass erase is disabled
+ This parameter must be a value of @ref FLASHEx_Address */
+
+ uint32_t NbPages; /*!< NbPages: Number of pagess to be erased.
+ This parameter must be a value between 1 and (max number of pages - value of initial page)*/
+
+} FLASH_EraseInitTypeDef;
+
+/**
+ * @brief FLASH Options bytes program structure definition
+ */
+typedef struct
+{
+ uint32_t OptionType; /*!< OptionType: Option byte to be configured.
+ This parameter can be a value of @ref FLASH_OB_Type */
+
+ uint32_t WRPState; /*!< WRPState: Write protection activation or deactivation.
+ This parameter can be a value of @ref FLASH_OB_WRP_State */
+
+ uint32_t WRPPage; /*!< WRPSector: specifies the page(s) to be write protected
+ This parameter can be a value of @ref FLASHEx_OB_Write_Protection */
+
+ uint8_t RDPLevel; /*!< RDPLevel: Set the read protection level..
+ This parameter can be a value of @ref FLASH_OB_Read_Protection */
+
+ uint8_t USERConfig; /*!< USERConfig: Program the FLASH User Option Byte:
+ IWDG / STOP / STDBY / BOOT1 / VDDA_ANALOG / SRAM_PARITY
+ This parameter can be a combination of @ref FLASH_OB_Watchdog, @ref FLASH_OB_nRST_STOP,
+ @ref FLASH_OB_nRST_STDBY, @ref FLASH_OB_BOOT1, @ref FLASH_OB_VDDA_Analog_Monitoring and
+ @ref FLASH_OB_RAM_Parity_Check_Enable */
+
+ uint32_t DATAAddress; /*!< DATAAddress: Address of the option byte DATA to be prgrammed
+ This parameter can be a value of @ref FLASH_OB_Data_Address */
+
+ uint8_t DATAData; /*!< DATAData: Data to be stored in the option byte DATA
+ This parameter can have any value */
+
+} FLASH_OBProgramInitTypeDef;
+
+/**
+ * @brief FLASH Procedure structure definition
+ */
+typedef enum
+{
+ FLASH_PROC_NONE = 0,
+ FLASH_PROC_PAGEERASE = 1,
+ FLASH_PROC_MASSERASE = 2,
+ FLASH_PROC_PROGRAMHALFWORD = 3,
+ FLASH_PROC_PROGRAMWORD = 4,
+ FLASH_PROC_PROGRAMDOUBLEWORD = 5
+} FLASH_ProcedureTypeDef;
+
+/**
+ * @brief FLASH handle Structure definition
+ */
+typedef struct
+{
+ __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*!< Internal variable to indicate which procedure is ongoing or not in IT context */
+
+ __IO uint32_t DataRemaining; /*!< Internal variable to save the remaining pages to erase or half-word to program in IT context */
+
+ __IO uint32_t Address; /*!< Internal variable to save address selected for program or erase */
+
+ __IO uint64_t Data; /*!< Internal variable to save data to be programmed */
+
+ HAL_LockTypeDef Lock; /*!< FLASH locking object */
+
+ __IO uint32_t ErrorCode; /*!< FLASH error code
+ This parameter can be a value of @ref FLASH_Error */
+
+} FLASH_ProcessTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
+ * @{
+ */
+
+/** @defgroup FLASH_Error FLASH Error
+ * @{
+ */
+#define FLASH_ERROR_NONE ((uint32_t)0x00000000)
+#define FLASH_ERROR_PG ((uint32_t)0x00000001)
+#define FLASH_ERROR_WRP ((uint32_t)0x00000002)
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Type_Erase FLASH Type Erase
+ * @{
+ */
+#define TYPEERASE_PAGES ((uint32_t)0x00) /*!<Pages erase only*/
+#define TYPEERASE_MASSERASE ((uint32_t)0x01) /*!<Flash mass erase activation*/
+
+#define IS_TYPEERASE(VALUE) (((VALUE) == TYPEERASE_PAGES) || \
+ ((VALUE) == TYPEERASE_MASSERASE))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Type_Program FLASH Type Program
+ * @{
+ */
+#define TYPEPROGRAM_HALFWORD ((uint32_t)0x01) /*!<Program a half-word (16-bit) at a specified address.*/
+#define TYPEPROGRAM_WORD ((uint32_t)0x02) /*!<Program a word (32-bit) at a specified address.*/
+#define TYPEPROGRAM_DOUBLEWORD ((uint32_t)0x03) /*!<Program a double word (64-bit) at a specified address*/
+
+#define IS_TYPEPROGRAM(VALUE) (((VALUE) == TYPEPROGRAM_HALFWORD) || \
+ ((VALUE) == TYPEPROGRAM_WORD) || \
+ ((VALUE) == TYPEPROGRAM_DOUBLEWORD))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_WRP_State FLASH WRP State
+ * @{
+ */
+#define WRPSTATE_DISABLE ((uint32_t)0x00) /*!<Disable the write protection of the desired pages*/
+#define WRPSTATE_ENABLE ((uint32_t)0x01) /*!<Enable the write protection of the desired pagess*/
+
+#define IS_WRPSTATE(VALUE) (((VALUE) == WRPSTATE_DISABLE) || \
+ ((VALUE) == WRPSTATE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_Type FLASH Option Bytes Type
+ * @{
+ */
+#define OPTIONBYTE_WRP ((uint32_t)0x01) /*!<WRP option byte configuration*/
+#define OPTIONBYTE_RDP ((uint32_t)0x02) /*!<RDP option byte configuration*/
+#define OPTIONBYTE_USER ((uint32_t)0x04) /*!<USER option byte configuration*/
+#define OPTIONBYTE_DATA ((uint32_t)0x08) /*!<DATA option byte configuration*/
+
+#define IS_OPTIONBYTE(VALUE) ((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Latency FLASH Latency
+ * @{
+ */
+#define FLASH_LATENCY_0 ((uint32_t)0x00000000) /*!< FLASH Zero Latency cycle */
+#define FLASH_LATENCY_1 FLASH_ACR_LATENCY /*!< FLASH One Latency cycle */
+
+#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \
+ ((LATENCY) == FLASH_LATENCY_1))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_Data_Address FLASH OB Data Address
+ * @{
+ */
+#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == 0x1FFFF804) || ((ADDRESS) == 0x1FFFF806))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_Read_Protection FLASH OB Read Protection
+ * @{
+ */
+#define OB_RDP_LEVEL_0 ((uint8_t)0xAA)
+#define OB_RDP_LEVEL_1 ((uint8_t)0xBB)
+#define OB_RDP_LEVEL_2 ((uint8_t)0xCC) /*!< Warning: When enabling read protection level 2
+ it's no more possible to go back to level 1 or 0 */
+#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\
+ ((LEVEL) == OB_RDP_LEVEL_1))/*||\
+ ((LEVEL) == OB_RDP_LEVEL_2))*/
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_Watchdog FLASH OB Watchdog
+ * @{
+ */
+#define OB_WDG_SW ((uint8_t)0x01) /*!< Software WDG selected */
+#define OB_WDG_HW ((uint8_t)0x00) /*!< Hardware WDG selected */
+#define IS_OB_WDG_SOURCE(SOURCE) (((SOURCE) == OB_WDG_SW) || ((SOURCE) == OB_WDG_HW))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_nRST_STOP FLASH OB nRST STOP
+ * @{
+ */
+#define OB_STOP_NO_RST ((uint8_t)0x02) /*!< No reset generated when entering in STOP */
+#define OB_STOP_RST ((uint8_t)0x00) /*!< Reset generated when entering in STOP */
+#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_nRST_STDBY FLASH OB nRST STDBY
+ * @{
+ */
+#define OB_STDBY_NO_RST ((uint8_t)0x04) /*!< No reset generated when entering in STANDBY */
+#define OB_STDBY_RST ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY */
+#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_BOOT1 FLASH OB BOOT1
+ * @{
+ */
+#define OB_BOOT1_RESET ((uint8_t)0x00) /*!< BOOT1 Reset */
+#define OB_BOOT1_SET ((uint8_t)0x10) /*!< BOOT1 Set */
+#define IS_OB_BOOT1(BOOT1) (((BOOT1) == OB_BOOT1_RESET) || ((BOOT1) == OB_BOOT1_SET))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_VDDA_Analog_Monitoring FLASH OB VDDA Analog Monitoring
+ * @{
+ */
+#define OB_VDDA_ANALOG_ON ((uint8_t)0x20) /*!< Analog monitoring on VDDA Power source ON */
+#define OB_VDDA_ANALOG_OFF ((uint8_t)0x00) /*!< Analog monitoring on VDDA Power source OFF */
+#define IS_OB_VDDA_ANALOG(ANALOG) (((ANALOG) == OB_VDDA_ANALOG_ON) || ((ANALOG) == OB_VDDA_ANALOG_OFF))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_RAM_Parity_Check_Enable FLASH OB RAM Parity Check Enable
+ * @{
+ */
+#define OB_RAM_PARITY_CHECK_SET ((uint8_t)0x00) /*!< RAM parity check enable set */
+#define OB_RAM_PARITY_CHECK_RESET ((uint8_t)0x40) /*!< RAM parity check enable reset */
+#define IS_OB_SRAM_PARITY(PARITY) (((PARITY) == OB_RAM_PARITY_CHECK_SET) || ((PARITY) == OB_RAM_PARITY_CHECK_RESET))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Flag_definition FLASH Flag definition
+ * @{
+ */
+#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
+#define FLASH_FLAG_PGERR FLASH_SR_PGERR /*!< FLASH Programming error flag */
+#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */
+#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
+ * @{
+ */
+#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
+#define FLASH_IT_ERR FLASH_CR_ERRIE /*!< Error Interrupt source */
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Timeout_definition FLASH Timeout definition
+ * @brief FLASH Timeout definition
+ * @{
+ */
+#define HAL_FLASH_TIMEOUT_VALUE ((uint32_t)50000)/* 50 s */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
+ * @brief macros to control FLASH features
+ * @{
+ */
+
+/** @defgroup FLASH_Latency FLASH Latency
+ * @brief macros to handle FLASH Latency
+ * @{
+ */
+
+/**
+ * @brief Set the FLASH Latency.
+ * @param __LATENCY__: FLASH Latency
+ * The value of this parameter depend on device used within the same series
+ * @retval None
+ */
+#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (FLASH->ACR = (FLASH->ACR&(~FLASH_ACR_LATENCY)) | (__LATENCY__))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Prefetch FLASH Prefetch
+ * @brief macros to handle FLASH Prefetch buffer
+ * @{
+ */
+/**
+ * @brief Enable the FLASH prefetch buffer.
+ * @retval None
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTBE)
+
+/**
+ * @brief Disable the FLASH prefetch buffer.
+ * @retval None
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTBE))
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Interrupt FLASH Interrupt
+ * @brief macros to handle FLASH interrupts
+ * @{
+ */
+
+/**
+ * @brief Enable the specified FLASH interrupt.
+ * @param __INTERRUPT__ : FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+ * @arg FLASH_IT_ERR: Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified FLASH interrupt.
+ * @param __INTERRUPT__ : FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+ * @arg FLASH_IT_ERR: Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
+
+/**
+ * @brief Get the specified FLASH flag status.
+ * @param __FLAG__: specifies the FLASH flag to check.
+ * This parameter can be one of the following values:
+ * @arg FLASH_FLAG_EOP : FLASH End of Operation flag
+ * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_PGERR : FLASH Programming error flag
+ * @arg FLASH_FLAG_BSY : FLASH Busy flag
+ * @retval The new state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear the specified FLASH flag.
+ * @param __FLAG__: specifies the FLASH flags to clear.
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_FLAG_EOP : FLASH End of Operation flag
+ * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_PGERR : FLASH Programming error flag
+ * @retval none
+ */
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Include FLASH HAL Extension module */
+#include "stm32f0xx_hal_flash_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup FLASH_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup FLASH_Exported_Functions_Group1
+ * @brief Data transfers functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+
+/* FLASH IRQ handler method */
+void HAL_FLASH_IRQHandler(void);
+/* Callbacks in non blocking modes */
+void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
+void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
+
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH_Exported_Functions_Group2
+ * @brief management functions
+ * @{
+ */
+
+/* FLASH Memory Programming functions *****************************************/
+HAL_StatusTypeDef HAL_FLASH_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_Lock(void);
+
+/* Option Bytes Programming functions *****************************************/
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
+
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+uint32_t HAL_FLASH_GetError(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_FLASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_flash_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,296 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_flash_ex.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of FLASH HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_FLASH_EX_H
+#define __STM32F0xx_HAL_FLASH_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASHEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FLASHEx_Exported_Constants FLASHEx Exported Constants
+ * @{
+ */
+/** @defgroup FLASHEx_Address FLASHEx Address
+ * @{
+ */
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F038xx) || defined(STM32F070x6)
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x08007FFF))
+#endif /* STM32F030x6 || STM32F031x6 || STM32F042x6 || STM32F048xx || STM32F038xx || STM32F070x6 */
+
+#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x0800FFFF))
+#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x0801FFFF))
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB*/
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x0803FFFF))
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC*/
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Page_Size FLASHEx Page Size
+ * @{
+ */
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || \
+ defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx) || defined(STM32F070x6)
+#define FLASH_PAGE_SIZE 0x400
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F058xx || STM32F070x6 */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+#define FLASH_PAGE_SIZE 0x800
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx || STM32F030xC */
+
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Nb_Pages FLASHEx Nb Pages
+ * @{
+ */
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F038xx)|| defined(STM32F070x6)
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08007FFF)
+#endif /* STM32F030x6 || STM32F031x6 || STM32F042x6 || STM32F048xx || STM32F038xx || STM32F070x6 */
+
+#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0800FFFF)
+#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0801FFFF)
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0803FFFF)
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_OB_Write_Protection FLASHEx OB Write Protection
+ * @{
+ */
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || \
+ defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx) || defined(STM32F070x6)
+#define OB_WRP_PAGES0TO3 ((uint32_t)0x00000001) /* Write protection of page 0 to 3 */
+#define OB_WRP_PAGES4TO7 ((uint32_t)0x00000002) /* Write protection of page 4 to 7 */
+#define OB_WRP_PAGES8TO11 ((uint32_t)0x00000004) /* Write protection of page 8 to 11 */
+#define OB_WRP_PAGES12TO15 ((uint32_t)0x00000008) /* Write protection of page 12 to 15 */
+#define OB_WRP_PAGES16TO19 ((uint32_t)0x00000010) /* Write protection of page 16 to 19 */
+#define OB_WRP_PAGES20TO23 ((uint32_t)0x00000020) /* Write protection of page 20 to 23 */
+#define OB_WRP_PAGES24TO27 ((uint32_t)0x00000040) /* Write protection of page 24 to 27 */
+#define OB_WRP_PAGES28TO31 ((uint32_t)0x00000080) /* Write protection of page 28 to 31 */
+#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
+#define OB_WRP_PAGES32TO35 ((uint32_t)0x00000100) /* Write protection of page 32 to 35 */
+#define OB_WRP_PAGES36TO39 ((uint32_t)0x00000200) /* Write protection of page 36 to 39 */
+#define OB_WRP_PAGES40TO43 ((uint32_t)0x00000400) /* Write protection of page 40 to 43 */
+#define OB_WRP_PAGES44TO47 ((uint32_t)0x00000800) /* Write protection of page 44 to 47 */
+#define OB_WRP_PAGES48TO51 ((uint32_t)0x00001000) /* Write protection of page 48 to 51 */
+#define OB_WRP_PAGES52TO57 ((uint32_t)0x00002000) /* Write protection of page 52 to 57 */
+#define OB_WRP_PAGES56TO59 ((uint32_t)0x00004000) /* Write protection of page 56 to 59 */
+#define OB_WRP_PAGES60TO63 ((uint32_t)0x00008000) /* Write protection of page 60 to 63 */
+#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
+
+#define OB_WRP_PAGES0TO31MASK ((uint32_t)0x000000FF)
+#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
+#define OB_WRP_PAGES32TO63MASK ((uint32_t)0x0000FF00)
+#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F038xx)|| defined(STM32F070x6)
+#define OB_WRP_ALLPAGES ((uint32_t)0x000000FF) /*!< Write protection of all pages */
+#endif /* STM32F030x6 || STM32F031x6 || STM32F042x6 || STM32F048xx || STM32F038xx || STM32F070x6 */
+
+#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
+#define OB_WRP_ALLPAGES ((uint32_t)0x0000FFFF) /*!< Write protection of all pages */
+#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F038xx || STM32F058xx || STM32F070x6 */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+#define OB_WRP_PAGES0TO1 ((uint32_t)0x00000001) /* Write protection of page 0 to 1 */
+#define OB_WRP_PAGES2TO3 ((uint32_t)0x00000002) /* Write protection of page 2 to 3 */
+#define OB_WRP_PAGES4TO5 ((uint32_t)0x00000004) /* Write protection of page 4 to 5 */
+#define OB_WRP_PAGES6TO7 ((uint32_t)0x00000008) /* Write protection of page 6 to 7 */
+#define OB_WRP_PAGES8TO9 ((uint32_t)0x00000010) /* Write protection of page 8 to 9 */
+#define OB_WRP_PAGES10TO11 ((uint32_t)0x00000020) /* Write protection of page 10 to 11 */
+#define OB_WRP_PAGES12TO13 ((uint32_t)0x00000040) /* Write protection of page 12 to 13 */
+#define OB_WRP_PAGES14TO15 ((uint32_t)0x00000080) /* Write protection of page 14 to 15 */
+#define OB_WRP_PAGES16TO17 ((uint32_t)0x00000100) /* Write protection of page 16 to 17 */
+#define OB_WRP_PAGES18TO19 ((uint32_t)0x00000200) /* Write protection of page 18 to 19 */
+#define OB_WRP_PAGES20TO21 ((uint32_t)0x00000400) /* Write protection of page 20 to 21 */
+#define OB_WRP_PAGES22TO23 ((uint32_t)0x00000800) /* Write protection of page 22 to 23 */
+#define OB_WRP_PAGES24TO25 ((uint32_t)0x00001000) /* Write protection of page 24 to 25 */
+#define OB_WRP_PAGES26TO27 ((uint32_t)0x00002000) /* Write protection of page 26 to 27 */
+#define OB_WRP_PAGES28TO29 ((uint32_t)0x00004000) /* Write protection of page 28 to 29 */
+#define OB_WRP_PAGES30TO31 ((uint32_t)0x00008000) /* Write protection of page 30 to 31 */
+#define OB_WRP_PAGES32TO33 ((uint32_t)0x00010000) /* Write protection of page 32 to 33 */
+#define OB_WRP_PAGES34TO35 ((uint32_t)0x00020000) /* Write protection of page 34 to 35 */
+#define OB_WRP_PAGES36TO37 ((uint32_t)0x00040000) /* Write protection of page 36 to 37 */
+#define OB_WRP_PAGES38TO39 ((uint32_t)0x00080000) /* Write protection of page 38 to 39 */
+#define OB_WRP_PAGES40TO41 ((uint32_t)0x00100000) /* Write protection of page 40 to 41 */
+#define OB_WRP_PAGES42TO43 ((uint32_t)0x00200000) /* Write protection of page 42 to 43 */
+#define OB_WRP_PAGES44TO45 ((uint32_t)0x00400000) /* Write protection of page 44 to 45 */
+#define OB_WRP_PAGES46TO47 ((uint32_t)0x00800000) /* Write protection of page 46 to 47 */
+#define OB_WRP_PAGES48TO49 ((uint32_t)0x01000000) /* Write protection of page 48 to 49 */
+#define OB_WRP_PAGES50TO51 ((uint32_t)0x02000000) /* Write protection of page 50 to 51 */
+#define OB_WRP_PAGES52TO53 ((uint32_t)0x04000000) /* Write protection of page 52 to 53 */
+#define OB_WRP_PAGES54TO55 ((uint32_t)0x08000000) /* Write protection of page 54 to 55 */
+#define OB_WRP_PAGES56TO57 ((uint32_t)0x10000000) /* Write protection of page 56 to 57 */
+#define OB_WRP_PAGES58TO59 ((uint32_t)0x20000000) /* Write protection of page 58 to 59 */
+#define OB_WRP_PAGES60TO61 ((uint32_t)0x40000000) /* Write protection of page 60 to 61 */
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
+#define OB_WRP_PAGES62TO63 ((uint32_t)0x80000000) /* Write protection of page 62 to 63 */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB */
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+#define OB_WRP_PAGES62TO127 ((uint32_t)0x80000000) /* Write protection of page 62 to 127 */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#define OB_WRP_PAGES0TO15MASK ((uint32_t)0x000000FF)
+#define OB_WRP_PAGES16TO31MASK ((uint32_t)0x0000FF00)
+#define OB_WRP_PAGES32TO47MASK ((uint32_t)0x00FF0000)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
+#define OB_WRP_PAGES48TO63MASK ((uint32_t)0xFF000000)
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB */
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+#define OB_WRP_PAGES48TO127MASK ((uint32_t)0xFF000000)
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#define OB_WRP_ALLPAGES ((uint32_t)0xFFFFFFFF) /*!< Write protection of all pages */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx || STM32F030xC || STM32F070xB */
+
+#define IS_OB_WRP(PAGE) (((PAGE) != 0x0000000))
+/**
+ * @}
+ */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)|| defined(STM32F070x6)
+/** @defgroup FLASHEx_OB_BOOT_SEL FLASHEx OB BOOT SEL
+ * @{
+ */
+#define OB_BOOT_SEL_RESET ((uint8_t)0x00) /*!< BOOT_SEL Reset */
+#define OB_BOOT_SEL_SET ((uint8_t)0x80) /*!< BOOT_SEL Set */
+#define IS_OB_BOOT_SEL(BOOT_SEL) (((BOOT_SEL) == OB_BOOT_SEL_RESET) || ((BOOT_SEL) == OB_BOOT_SEL_SET))
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_OB_BOOT0 FLASHEx OB BOOT0
+ * @{
+ */
+#define OB_BOOT0_RESET ((uint8_t)0x00) /*!< BOOT0 Reset */
+#define OB_BOOT0_SET ((uint8_t)0x08) /*!< BOOT0 Set */
+#define IS_OB_BOOT0(BOOT0) (((BOOT0) == OB_BOOT0_RESET) || ((BOOT0) == OB_BOOT0_SET))
+/**
+ * @}
+ */
+#endif /* STM32F042x6 || STM32F048xx || STM32F091xC || STM32F098xx || STM32F030xC || STM32F070x6 */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASHEx_Exported_Functions FLASHEx Exported Functions
+ * @{
+ */
+
+/** @addtogroup FLASHEx_Exported_Functions_Group2 Extended I/O operation functions
+ * @brief Extended I/O operation functions
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError);
+HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit);
+
+/**
+ * @}
+ */
+
+/** @addtogroup FLASHEx_Exported_Functions_Group3 Extended Peripheral Control functions
+ * @brief Extended Peripheral Control functions
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_FLASHEx_OBErase(void);
+HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
+void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_FLASH_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_gpio.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,318 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_gpio.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of GPIO HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_GPIO_H
+#define __STM32F0xx_HAL_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup GPIO
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Types GPIO Exported Types
+ * @{
+ */
+/**
+ * @brief GPIO Init structure definition
+ */
+typedef struct
+{
+ uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
+ This parameter can be any value of @ref GPIO_pins */
+
+ uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref GPIO_mode */
+
+ uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
+ This parameter can be a value of @ref GPIO_pull */
+
+ uint32_t Speed; /*!< Specifies the speed for the selected pins.
+ This parameter can be a value of @ref GPIO_speed */
+
+ uint32_t Alternate; /*!< Peripheral to be connected to the selected pins
+ This parameter can be a value of @ref GPIOEx_Alternate_function_selection */
+}GPIO_InitTypeDef;
+
+/**
+ * @brief GPIO Bit SET and Bit RESET enumeration
+ */
+typedef enum
+{
+ GPIO_PIN_RESET = 0,
+ GPIO_PIN_SET
+}GPIO_PinState;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
+ * @{
+ */
+
+/** @defgroup GPIO_pin_actions GPIO pin actions
+ * @{
+ */
+#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_pins GPIO pins
+ * @{
+ */
+#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */
+#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */
+#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */
+#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */
+#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */
+#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */
+#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */
+#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */
+#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */
+#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */
+#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */
+#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */
+#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */
+#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */
+#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */
+#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */
+#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */
+
+#define GPIO_PIN_MASK ((uint32_t)0x0000FFFF) /* PIN mask for assert test */
+
+#define IS_GPIO_PIN(PIN) (((PIN) & GPIO_PIN_MASK) != (uint32_t)0x00)
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_mode GPIO mode
+ * @brief GPIO Configuration Mode
+ * Elements values convention: 0xX0yz00YZ
+ * - X : GPIO mode or EXTI Mode
+ * - y : External IT or Event trigger detection
+ * - z : IO configuration on External IT or Event
+ * - Y : Output type (Push Pull or Open Drain)
+ * - Z : IO Direction mode (Input, Output, Alternate or Analog)
+ * @{
+ */
+#define GPIO_MODE_INPUT ((uint32_t)0x00000000) /*!< Input Floating Mode */
+#define GPIO_MODE_OUTPUT_PP ((uint32_t)0x00000001) /*!< Output Push Pull Mode */
+#define GPIO_MODE_OUTPUT_OD ((uint32_t)0x00000011) /*!< Output Open Drain Mode */
+#define GPIO_MODE_AF_PP ((uint32_t)0x00000002) /*!< Alternate Function Push Pull Mode */
+#define GPIO_MODE_AF_OD ((uint32_t)0x00000012) /*!< Alternate Function Open Drain Mode */
+
+#define GPIO_MODE_ANALOG ((uint32_t)0x00000003) /*!< Analog Mode */
+
+#define GPIO_MODE_IT_RISING ((uint32_t)0x10110000) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define GPIO_MODE_IT_FALLING ((uint32_t)0x10210000) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define GPIO_MODE_IT_RISING_FALLING ((uint32_t)0x10310000) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+
+#define GPIO_MODE_EVT_RISING ((uint32_t)0x10120000) /*!< External Event Mode with Rising edge trigger detection */
+#define GPIO_MODE_EVT_FALLING ((uint32_t)0x10220000) /*!< External Event Mode with Falling edge trigger detection */
+#define GPIO_MODE_EVT_RISING_FALLING ((uint32_t)0x10320000) /*!< External Event Mode with Rising/Falling edge trigger detection */
+
+#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\
+ ((MODE) == GPIO_MODE_OUTPUT_PP) ||\
+ ((MODE) == GPIO_MODE_OUTPUT_OD) ||\
+ ((MODE) == GPIO_MODE_AF_PP) ||\
+ ((MODE) == GPIO_MODE_AF_OD) ||\
+ ((MODE) == GPIO_MODE_IT_RISING) ||\
+ ((MODE) == GPIO_MODE_IT_FALLING) ||\
+ ((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\
+ ((MODE) == GPIO_MODE_EVT_RISING) ||\
+ ((MODE) == GPIO_MODE_EVT_FALLING) ||\
+ ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
+ ((MODE) == GPIO_MODE_ANALOG))
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_speed GPIO speed
+ * @brief GPIO Output Maximum frequency
+ * @{
+ */
+#define GPIO_SPEED_LOW ((uint32_t)0x00000000) /*!< Low speed */
+#define GPIO_SPEED_MEDIUM ((uint32_t)0x00000001) /*!< Medium speed */
+#define GPIO_SPEED_HIGH ((uint32_t)0x00000003) /*!< High speed */
+
+#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_LOW) || ((SPEED) == GPIO_SPEED_MEDIUM) || \
+ ((SPEED) == GPIO_SPEED_HIGH))
+/**
+ * @}
+ */
+
+ /** @defgroup GPIO_pull GPIO pull
+ * @brief GPIO Pull-Up or Pull-Down Activation
+ * @{
+ */
+#define GPIO_NOPULL ((uint32_t)0x00000000) /*!< No Pull-up or Pull-down activation */
+#define GPIO_PULLUP ((uint32_t)0x00000001) /*!< Pull-up activation */
+#define GPIO_PULLDOWN ((uint32_t)0x00000002) /*!< Pull-down activation */
+
+#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
+ ((PULL) == GPIO_PULLDOWN))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Checks whether the specified EXTI line flag is set or not.
+ * @param __EXTI_LINE__: specifies the EXTI line flag to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clears the EXTI's line pending flags.
+ * @param __EXTI_LINE__: specifies the EXTI lines flags to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Checks whether the specified EXTI line is asserted or not.
+ * @param __EXTI_LINE__: specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clears the EXTI's line pending bits.
+ * @param __EXTI_LINE__: specifies the EXTI lines to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Generates a Software interrupt on selected EXTI line.
+ * @param __EXTI_LINE__: specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+
+/**
+ * @}
+ */
+
+/* Include GPIO HAL Extension module */
+#include "stm32f0xx_hal_gpio_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup GPIO_Exported_Functions GPIO Exported Functions
+ * @{
+ */
+
+/** @addtogroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions *****************************/
+void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
+void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
+
+/**
+ * @}
+ */
+
+/** @addtogroup GPIO_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_GPIO_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_gpio_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,810 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_gpio_ex.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of GPIO HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_GPIO_EX_H
+#define __STM32F0xx_HAL_GPIO_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup GPIOEx GPIOEx Extended HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Constants GPIOEx Exported Constants
+ * @{
+ */
+
+/** @defgroup GPIOEx_Alternate_function_selection GPIOEx Alternate function selection
+ * @{
+ */
+
+#if defined (STM32F030x6)
+/*------------------------- STM32F030x6---------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03) /*!< AF3: I2C1 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /*!< AF4: I2C1 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06)
+
+#endif /* STM32F030x6 */
+
+/*---------------------------------- STM32F030x8 -------------------------------------------*/
+#if defined (STM32F030x8)
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< AF0: SPI2 Alternate Function mapping */
+#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< AF0: TIM15 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /*!< AF1: TIM15 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_I2C2 ((uint8_t)0x01) /*!< AF1: I2C2 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03) /*!< AF3: I2C1 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /*!< AF3: TIM15 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06)
+
+#endif /* STM32F030x8 */
+
+#if defined (STM32F031x6) || defined (STM32F038xx)
+/*--------------------------- STM32F031x6/STM32F038xx ---------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_SWDAT ((uint8_t)0x00) /*!< AF0: SWDAT Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< AF2: TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03) /*!< AF3: I2C1 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /*!< AF4: I2C1 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06)
+
+#endif /* STM32F031x6 || STM32F038xx */
+
+#if defined (STM32F051x8) || defined (STM32F058xx)
+/*--------------------------- STM32F051x8/STM32F058xx---------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< AF0: SPI2 Alternate Function mapping */
+#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< AF0: TIM15 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_CEC ((uint8_t)0x00) /*!< AF0: CEC Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /*!< AF1: TIM15 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_I2C2 ((uint8_t)0x01) /*!< AF1: I2C2 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_CEC ((uint8_t)0x01) /*!< AF1: CEC Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< AF2: TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03) /*!< AF3: I2C1 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /*!< AF3: TIM15 Alternate Function mapping */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /*!< AF3: TSC Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+/* AF 7 */
+#define GPIO_AF7_COMP1 ((uint8_t)0x07) /*!< AF7: COMP1 Alternate Function mapping */
+#define GPIO_AF7_COMP2 ((uint8_t)0x07) /*!< AF7: COMP2 Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07)
+
+#endif /* STM32F051x8/STM32F058xx */
+
+#if defined (STM32F071xB)
+/*--------------------------- STM32F071xB ---------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: AEVENTOUT Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_CEC ((uint8_t)0x00) /*!< AF0: CEC Alternate Function mapping */
+#define GPIO_AF0_CRS ((uint8_t)0x00) /*!< AF0: CRS Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< AF0: SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF0_TIM1 ((uint8_t)0x00) /*!< AF0: TIM1 Alternate Function mapping */
+#define GPIO_AF0_TIM3 ((uint8_t)0x00) /*!< AF0: TIM3 Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< AF0: TIM15 Alternate Function mapping */
+#define GPIO_AF0_TIM16 ((uint8_t)0x00) /*!< AF0: TIM16 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_TSC ((uint8_t)0x00) /*!< AF0: TSC Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< AF0: USART2 Alternate Function mapping */
+#define GPIO_AF0_USART3 ((uint8_t)0x00) /*!< AF0: USART3 Alternate Function mapping */
+#define GPIO_AF0_USART4 ((uint8_t)0x00) /*!< AF0: USART4 Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /*!< AF1: TIM15 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_USART3 ((uint8_t)0x01) /*!< AF1: USART3 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_CEC ((uint8_t)0x01) /*!< AF1: CEC Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_I2C2 ((uint8_t)0x01) /*!< AF1: I2C2 Alternate Function mapping */
+#define GPIO_AF1_TSC ((uint8_t)0x01) /*!< AF1: TSC Alternate Function mapping */
+#define GPIO_AF1_SPI1 ((uint8_t)0x01) /*!< AF1: SPI1 Alternate Function mapping */
+#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< AF1: SPI2 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< AF2: TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /*!< AF3: TSC Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /*!< AF3: TIM15 Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03) /*!< AF3: I2C1 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< AF4: USART4 Alternate Function mapping */
+#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< AF4: USART3 Alternate Function mapping */
+#define GPIO_AF4_CRS ((uint8_t)0x04) /*!< AF4: CRS Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< AF5: TIM15 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< AF5: SPI2 Alternate Function mapping */
+#define GPIO_AF5_I2C2 ((uint8_t)0x05) /*!< AF5: I2C2 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+/* AF 7 */
+#define GPIO_AF7_COMP1 ((uint8_t)0x07) /*!< AF7: COMP1 Alternate Function mapping */
+#define GPIO_AF7_COMP2 ((uint8_t)0x07) /*!< AF7: COMP2 Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07)
+
+#endif /* STM32F071xB */
+
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+/*--------------------------- STM32F091xC || STM32F098xx ------------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_CEC ((uint8_t)0x00) /*!< AF0: CEC Alternate Function mapping */
+#define GPIO_AF0_CRS ((uint8_t)0x00) /*!< AF0: CRS Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< AF0: SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF0_TIM1 ((uint8_t)0x00) /*!< AF0: TIM1 Alternate Function mapping */
+#define GPIO_AF0_TIM3 ((uint8_t)0x00) /*!< AF0: TIM3 Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< AF0: TIM15 Alternate Function mapping */
+#define GPIO_AF0_TIM16 ((uint8_t)0x00) /*!< AF0: TIM16 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_TSC ((uint8_t)0x00) /*!< AF0: TSC Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< AF0: USART2 Alternate Function mapping */
+#define GPIO_AF0_USART3 ((uint8_t)0x00) /*!< AF0: USART3 Alternate Function mapping */
+#define GPIO_AF0_USART4 ((uint8_t)0x00) /*!< AF0: USART4 Alternate Function mapping */
+#define GPIO_AF0_USART8 ((uint8_t)0x00) /*!< AF0: USART8 Alternate Function mapping */
+#define GPIO_AF0_CAN ((uint8_t)0x00) /*!< AF0: CAN Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /*!< AF1: TIM15 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_USART3 ((uint8_t)0x01) /*!< AF1: USART3 Alternate Function mapping */
+#define GPIO_AF1_USART4 ((uint8_t)0x01) /*!< AF1: USART4 Alternate Function mapping */
+#define GPIO_AF1_USART5 ((uint8_t)0x01) /*!< AF1: USART5 Alternate Function mapping */
+#define GPIO_AF1_USART6 ((uint8_t)0x01) /*!< AF1: USART6 Alternate Function mapping */
+#define GPIO_AF1_USART7 ((uint8_t)0x01) /*!< AF1: USART7 Alternate Function mapping */
+#define GPIO_AF1_USART8 ((uint8_t)0x01) /*!< AF1: USART8 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_CEC ((uint8_t)0x01) /*!< AF1: CEC Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_I2C2 ((uint8_t)0x01) /*!< AF1: I2C2 Alternate Function mapping */
+#define GPIO_AF1_TSC ((uint8_t)0x01) /*!< AF1: TSC Alternate Function mapping */
+#define GPIO_AF1_SPI1 ((uint8_t)0x01) /*!< AF1: SPI1 Alternate Function mapping */
+#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< AF1: SPI2 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< AF2: TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+#define GPIO_AF2_USART5 ((uint8_t)0x02) /*!< AF2: USART5 Alternate Function mapping */
+#define GPIO_AF2_USART6 ((uint8_t)0x02) /*!< AF2: USART6 Alternate Function mapping */
+#define GPIO_AF2_USART7 ((uint8_t)0x02) /*!< AF2: USART7 Alternate Function mapping */
+#define GPIO_AF2_USART8 ((uint8_t)0x02) /*!< AF2: USART8 Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /*!< AF3: TSC Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /*!< AF3: TIM15 Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03) /*!< AF3: I2C1 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< AF4: USART4 Alternate Function mapping */
+#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< AF4: USART3 Alternate Function mapping */
+#define GPIO_AF4_CRS ((uint8_t)0x04) /*!< AF4: CRS Alternate Function mapping */
+#define GPIO_AF4_CAN ((uint8_t)0x04) /*!< AF4: CAN Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /*!< AF4: I2C1 Alternate Function mapping */
+#define GPIO_AF4_USART5 ((uint8_t)0x04) /*!< AF4: USART5 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< AF5: TIM15 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< AF5: SPI2 Alternate Function mapping */
+#define GPIO_AF5_I2C2 ((uint8_t)0x05) /*!< AF5: I2C2 Alternate Function mapping */
+#define GPIO_AF5_MCO ((uint8_t)0x05) /*!< AF5: MCO Alternate Function mapping */
+#define GPIO_AF5_USART6 ((uint8_t)0x05) /*!< AF5: USART6 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+/* AF 7 */
+#define GPIO_AF7_COMP1 ((uint8_t)0x07) /*!< AF7: COMP1 Alternate Function mapping */
+#define GPIO_AF7_COMP2 ((uint8_t)0x07) /*!< AF7: COMP2 Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07)
+
+#endif /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F030xC)
+/*--------------------------- STM32F030xC ----------------------------------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< AF0: SPI2 Alternate Function mapping */
+#define GPIO_AF0_TIM3 ((uint8_t)0x00) /*!< AF0: TIM3 Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< AF0: TIM15 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_USART4 ((uint8_t)0x00) /*!< AF0: USART4 Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /*!< AF1: TIM15 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_USART3 ((uint8_t)0x01) /*!< AF1: USART3 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_I2C2 ((uint8_t)0x01) /*!< AF1: I2C2 Alternate Function mapping */
+#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< AF1: SPI2 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+#define GPIO_AF2_USART5 ((uint8_t)0x02) /*!< AF2: USART5 Alternate Function mapping */
+#define GPIO_AF2_USART6 ((uint8_t)0x02) /*!< AF2: USART6 Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /*!< AF3: TIM15 Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03) /*!< AF3: I2C1 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< AF4: USART4 Alternate Function mapping */
+#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< AF4: USART3 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /*!< AF4: I2C1 Alternate Function mapping */
+#define GPIO_AF4_USART5 ((uint8_t)0x04) /*!< AF4: USART5 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< AF5: TIM15 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< AF5: SPI2 Alternate Function mapping */
+#define GPIO_AF5_I2C2 ((uint8_t)0x05) /*!< AF5: I2C2 Alternate Function mapping */
+#define GPIO_AF5_MCO ((uint8_t)0x05) /*!< AF5: MCO Alternate Function mapping */
+#define GPIO_AF5_USART6 ((uint8_t)0x05) /*!< AF5: USART6 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06)
+
+#endif /* STM32F030xC */
+
+#if defined (STM32F072xB) || defined (STM32F078xx)
+/*--------------------------- STM32F072xB/STM32F078xx ---------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_CEC ((uint8_t)0x00) /*!< AF0: CEC Alternate Function mapping */
+#define GPIO_AF0_CRS ((uint8_t)0x00) /*!< AF0: CRS Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< AF0: SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF0_TIM1 ((uint8_t)0x00) /*!< AF0: TIM1 Alternate Function mapping */
+#define GPIO_AF0_TIM3 ((uint8_t)0x00) /*!< AF0: TIM3 Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< AF0: TIM15 Alternate Function mapping */
+#define GPIO_AF0_TIM16 ((uint8_t)0x00) /*!< AF0: TIM16 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_TSC ((uint8_t)0x00) /*!< AF0: TSC Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_USART2 ((uint8_t)0x00) /*!< AF0: USART2 Alternate Function mapping */
+#define GPIO_AF0_USART3 ((uint8_t)0x00) /*!< AF0: USART2 Alternate Function mapping */
+#define GPIO_AF0_USART4 ((uint8_t)0x00) /*!< AF0: USART4 Alternate Function mapping */
+#define GPIO_AF0_CAN ((uint8_t)0x00) /*!< AF0: CAN Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /*!< AF1: TIM15 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_USART3 ((uint8_t)0x01) /*!< AF1: USART3 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_CEC ((uint8_t)0x01) /*!< AF1: CEC Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_I2C2 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_TSC ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_SPI1 ((uint8_t)0x01) /*!< AF1: SPI1 Alternate Function mapping */
+#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< AF1: SPI2 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< AF2: TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+#define GPIO_AF2_USB ((uint8_t)0x02) /*!< AF2: USB Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /*!< AF3: TSC Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /*!< AF3: TIM15 Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03) /*!< AF3: I2C1 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< AF4: USART4 Alternate Function mapping */
+#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< AF4: USART3 Alternate Function mapping */
+#define GPIO_AF4_CRS ((uint8_t)0x04) /*!< AF4: CRS Alternate Function mapping */
+#define GPIO_AF4_CAN ((uint8_t)0x04) /*!< AF4: CAN Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< AF5: TIM15 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< AF5: SPI2 Alternate Function mapping */
+#define GPIO_AF5_I2C2 ((uint8_t)0x05) /*!< AF5: I2C2 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+/* AF 7 */
+#define GPIO_AF7_COMP1 ((uint8_t)0x07) /*!< AF7: COMP1 Alternate Function mapping */
+#define GPIO_AF7_COMP2 ((uint8_t)0x07) /*!< AF7: COMP2 Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x07)
+
+#endif /* STM32F072xB || STM32F078xx */
+
+#if defined (STM32F070xB)
+/*---------------------------------- STM32F070xB ---------------------------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< AF0: SPI2 Alternate Function mapping */
+#define GPIO_AF0_TIM3 ((uint8_t)0x00) /*!< AF0: TIM3 Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< AF0: TIM15 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_USART4 ((uint8_t)0x00) /*!< AF0: USART4 Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /*!< AF1: TIM15 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_USART3 ((uint8_t)0x01) /*!< AF1: USART4 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_I2C2 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< AF1: SPI2 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+#define GPIO_AF2_USB ((uint8_t)0x02) /*!< AF2: USB Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /*!< AF3: TIM15 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< AF4: USART4 Alternate Function mapping */
+#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< AF4: USART3 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< AF5: TIM15 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< AF5: SPI2 Alternate Function mapping */
+#define GPIO_AF5_I2C2 ((uint8_t)0x05) /*!< AF5: I2C2 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06)
+
+#endif /* STM32F070xB */
+
+#if defined (STM32F042x6) || defined (STM32F048xx)
+/*--------------------------- STM32F042x6/STM32F048xx ---------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_CEC ((uint8_t)0x00) /*!< AF0: CEC Alternate Function mapping */
+#define GPIO_AF0_CRS ((uint8_t)0x00) /*!< AF0: CRS Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< AF0: SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_CEC ((uint8_t)0x01) /*!< AF1: CEC Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02) /*!< AF2: TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_USB ((uint8_t)0x02) /*!< AF2: USB Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03) /*!< AF3: I2C1 Alternate Function mapping */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /*!< AF3: TSC Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_CAN ((uint8_t)0x04) /*!< AF4: CAN Alternate Function mapping */
+#define GPIO_AF4_CRS ((uint8_t)0x04) /*!< AF4: CRS Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /*!< AF4: I2C1 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_MCO ((uint8_t)0x05) /*!< AF5: MCO Alternate Function mapping */
+#define GPIO_AF5_I2C1 ((uint8_t)0x05) /*!< AF5: I2C1 Alternate Function mapping */
+#define GPIO_AF5_I2C2 ((uint8_t)0x05) /*!< AF5: I2C2 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< AF5: SPI2 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_USB ((uint8_t)0x05) /*!< AF5: USB Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06)
+
+#endif /* STM32F042x6 || STM32F048xx */
+
+#if defined (STM32F070x6)
+/*--------------------------------------- STM32F070x6 ----------------------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1 Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_USB ((uint8_t)0x02) /*!< AF2: USB Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03) /*!< AF3: I2C1 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /*!< AF4: I2C1 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_MCO ((uint8_t)0x05) /*!< AF5: MCO Alternate Function mapping */
+#define GPIO_AF5_I2C1 ((uint8_t)0x05) /*!< AF5: I2C1 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_USB ((uint8_t)0x05) /*!< AF5: USB Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06)
+
+#endif /* STM32F070x6 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Macros GPIOEx Exported Macros
+ * @{
+ */
+
+/** @defgroup GPIOEx_Get_Port_Index GPIOEx_Get Port Index
+* @{
+ */
+#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx)
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U :\
+ ((__GPIOx__) == (GPIOE))? 4U : 5U)
+#endif
+
+#if defined (STM32F030x6) || defined (STM32F030x8) || defined (STM32F070xB) || defined (STM32F030xC) || \
+ defined (STM32F051x8) || defined (STM32F058xx)
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U :\
+ ((__GPIOx__) == (GPIOD))? 3U : 5U)
+#endif
+
+#if defined (STM32F031x6) || defined (STM32F038xx) || \
+ defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6)
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
+ ((__GPIOx__) == (GPIOB))? 1U :\
+ ((__GPIOx__) == (GPIOC))? 2U : 5U)
+#endif
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_GPIO_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_i2c.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,562 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_i2c.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of I2C HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_I2C_H
+#define __STM32F0xx_HAL_I2C_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2C
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2C_Exported_Types I2C Exported Types
+ * @{
+ */
+
+/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition
+ * @brief I2C Configuration Structure definition
+ * @{
+ */
+typedef struct
+{
+ uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value.
+ This parameter calculated by referring to I2C initialization
+ section in Reference manual */
+
+ uint32_t OwnAddress1; /*!< Specifies the first device own address.
+ This parameter can be a 7-bit or 10-bit address. */
+
+ uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
+ This parameter can be a value of @ref I2C_addressing_mode */
+
+ uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
+ This parameter can be a value of @ref I2C_dual_addressing_mode */
+
+ uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
+ This parameter can be a 7-bit address. */
+
+ uint32_t OwnAddress2Masks; /*!< Specifies the acknoledge mask address second device own address if dual addressing mode is selected
+ This parameter can be a value of @ref I2C_own_address2_masks. */
+
+ uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
+ This parameter can be a value of @ref I2C_general_call_addressing_mode. */
+
+ uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
+ This parameter can be a value of @ref I2C_nostretch_mode */
+
+}I2C_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_state_structure_definition HAL state structure definition
+ * @brief HAL State structure definition
+ * @{
+ */
+
+typedef enum
+{
+ HAL_I2C_STATE_RESET = 0x00, /*!< I2C not yet initialized or disabled */
+ HAL_I2C_STATE_READY = 0x01, /*!< I2C initialized and ready for use */
+ HAL_I2C_STATE_BUSY = 0x02, /*!< I2C internal process is ongoing */
+ HAL_I2C_STATE_MASTER_BUSY_TX = 0x12, /*!< Master Data Transmission process is ongoing */
+ HAL_I2C_STATE_MASTER_BUSY_RX = 0x22, /*!< Master Data Reception process is ongoing */
+ HAL_I2C_STATE_SLAVE_BUSY_TX = 0x32, /*!< Slave Data Transmission process is ongoing */
+ HAL_I2C_STATE_SLAVE_BUSY_RX = 0x42, /*!< Slave Data Reception process is ongoing */
+ HAL_I2C_STATE_MEM_BUSY_TX = 0x52, /*!< Memory Data Transmission process is ongoing */
+ HAL_I2C_STATE_MEM_BUSY_RX = 0x62, /*!< Memory Data Reception process is ongoing */
+ HAL_I2C_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_I2C_STATE_ERROR = 0x04 /*!< Reception process is ongoing */
+
+}HAL_I2C_StateTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition
+ * @brief I2C handle Structure definition
+ * @{
+ */
+
+typedef struct
+{
+ I2C_TypeDef *Instance; /*!< I2C registers base address */
+
+ I2C_InitTypeDef Init; /*!< I2C communication parameters */
+
+ uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */
+
+ uint16_t XferSize; /*!< I2C transfer size */
+
+ __IO uint16_t XferCount; /*!< I2C transfer counter */
+
+ DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< I2C locking object */
+
+ __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */
+
+ __IO uint32_t ErrorCode; /*!< I2C Error code
+ This parameter can be a value of @ref I2C_Error */
+
+}I2C_HandleTypeDef;
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Constants I2C Exported Constants
+ * @{
+ */
+
+/** @defgroup I2C_Error I2C Error
+ * @brief I2C Error
+ * @{
+ */
+
+#define HAL_I2C_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_I2C_ERROR_BERR ((uint32_t)0x00000001) /*!< BERR error */
+#define HAL_I2C_ERROR_ARLO ((uint32_t)0x00000002) /*!< ARLO error */
+#define HAL_I2C_ERROR_AF ((uint32_t)0x00000004) /*!< AF error */
+#define HAL_I2C_ERROR_OVR ((uint32_t)0x00000008) /*!< OVR error */
+#define HAL_I2C_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+#define HAL_I2C_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */
+#define HAL_I2C_ERROR_SIZE ((uint32_t)0x00000040) /*!< Size Management error */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup I2C_addressing_mode I2C addressing mode
+ * @{
+ */
+#define I2C_ADDRESSINGMODE_7BIT ((uint32_t)0x00000001)
+#define I2C_ADDRESSINGMODE_10BIT ((uint32_t)0x00000002)
+
+#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \
+ ((MODE) == I2C_ADDRESSINGMODE_10BIT))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_dual_addressing_mode I2C dual addressing mode
+ * @{
+ */
+
+#define I2C_DUALADDRESS_DISABLED ((uint32_t)0x00000000)
+#define I2C_DUALADDRESS_ENABLED I2C_OAR2_OA2EN
+
+#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLED) || \
+ ((ADDRESS) == I2C_DUALADDRESS_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_own_address2_masks I2C own address2 masks
+ * @{
+ */
+
+#define I2C_OA2_NOMASK ((uint8_t)0x00)
+#define I2C_OA2_MASK01 ((uint8_t)0x01)
+#define I2C_OA2_MASK02 ((uint8_t)0x02)
+#define I2C_OA2_MASK03 ((uint8_t)0x03)
+#define I2C_OA2_MASK04 ((uint8_t)0x04)
+#define I2C_OA2_MASK05 ((uint8_t)0x05)
+#define I2C_OA2_MASK06 ((uint8_t)0x06)
+#define I2C_OA2_MASK07 ((uint8_t)0x07)
+
+#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \
+ ((MASK) == I2C_OA2_MASK01) || \
+ ((MASK) == I2C_OA2_MASK02) || \
+ ((MASK) == I2C_OA2_MASK03) || \
+ ((MASK) == I2C_OA2_MASK04) || \
+ ((MASK) == I2C_OA2_MASK05) || \
+ ((MASK) == I2C_OA2_MASK06) || \
+ ((MASK) == I2C_OA2_MASK07))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_general_call_addressing_mode I2C general call addressing mode
+ * @{
+ */
+#define I2C_GENERALCALL_DISABLED ((uint32_t)0x00000000)
+#define I2C_GENERALCALL_ENABLED I2C_CR1_GCEN
+
+#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLED) || \
+ ((CALL) == I2C_GENERALCALL_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_nostretch_mode I2C nostretch mode
+ * @{
+ */
+#define I2C_NOSTRETCH_DISABLED ((uint32_t)0x00000000)
+#define I2C_NOSTRETCH_ENABLED I2C_CR1_NOSTRETCH
+
+#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLED) || \
+ ((STRETCH) == I2C_NOSTRETCH_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Memory_Address_Size I2C Memory Address Size
+ * @{
+ */
+#define I2C_MEMADD_SIZE_8BIT ((uint32_t)0x00000001)
+#define I2C_MEMADD_SIZE_16BIT ((uint32_t)0x00000002)
+
+#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
+ ((SIZE) == I2C_MEMADD_SIZE_16BIT))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_ReloadEndMode_definition I2C ReloadEndMode definition
+ * @{
+ */
+
+#define I2C_RELOAD_MODE I2C_CR2_RELOAD
+#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND
+#define I2C_SOFTEND_MODE ((uint32_t)0x00000000)
+
+#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \
+ ((MODE) == I2C_AUTOEND_MODE) || \
+ ((MODE) == I2C_SOFTEND_MODE))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_StartStopMode_definition I2C StartStopMode definition
+ * @{
+ */
+
+#define I2C_NO_STARTSTOP ((uint32_t)0x00000000)
+#define I2C_GENERATE_STOP I2C_CR2_STOP
+#define I2C_GENERATE_START_READ (uint32_t)(I2C_CR2_START | I2C_CR2_RD_WRN)
+#define I2C_GENERATE_START_WRITE I2C_CR2_START
+
+#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \
+ ((REQUEST) == I2C_GENERATE_START_READ) || \
+ ((REQUEST) == I2C_GENERATE_START_WRITE) || \
+ ((REQUEST) == I2C_NO_STARTSTOP))
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition
+ * @brief I2C Interrupt definition
+ * Elements values convention: 0xXXXXXXXX
+ * - XXXXXXXX : Interrupt control mask
+ * @{
+ */
+#define I2C_IT_ERRI I2C_CR1_ERRIE
+#define I2C_IT_TCI I2C_CR1_TCIE
+#define I2C_IT_STOPI I2C_CR1_STOPIE
+#define I2C_IT_NACKI I2C_CR1_NACKIE
+#define I2C_IT_ADDRI I2C_CR1_ADDRIE
+#define I2C_IT_RXI I2C_CR1_RXIE
+#define I2C_IT_TXI I2C_CR1_TXIE
+
+/**
+ * @}
+ */
+
+
+/** @defgroup I2C_Flag_definition I2C Flag definition
+ * @{
+ */
+
+#define I2C_FLAG_TXE I2C_ISR_TXE
+#define I2C_FLAG_TXIS I2C_ISR_TXIS
+#define I2C_FLAG_RXNE I2C_ISR_RXNE
+#define I2C_FLAG_ADDR I2C_ISR_ADDR
+#define I2C_FLAG_AF I2C_ISR_NACKF
+#define I2C_FLAG_STOPF I2C_ISR_STOPF
+#define I2C_FLAG_TC I2C_ISR_TC
+#define I2C_FLAG_TCR I2C_ISR_TCR
+#define I2C_FLAG_BERR I2C_ISR_BERR
+#define I2C_FLAG_ARLO I2C_ISR_ARLO
+#define I2C_FLAG_OVR I2C_ISR_OVR
+#define I2C_FLAG_PECERR I2C_ISR_PECERR
+#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT
+#define I2C_FLAG_ALERT I2C_ISR_ALERT
+#define I2C_FLAG_BUSY I2C_ISR_BUSY
+#define I2C_FLAG_DIR I2C_ISR_DIR
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Macros I2C Exported Macros
+ * @{
+ */
+
+/** @brief Reset I2C handle state
+ * @param __HANDLE__: I2C handle.
+ * @retval None
+ */
+#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
+
+/** @brief Enables or disables the specified I2C interrupts.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2Cx where x: 1 or 2 to select the I2C peripheral.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg I2C_IT_ERRI: Errors interrupt enable
+ * @arg I2C_IT_TCI: Transfer complete interrupt enable
+ * @arg I2C_IT_STOPI: STOP detection interrupt enable
+ * @arg I2C_IT_NACKI: NACK received interrupt enable
+ * @arg I2C_IT_ADDRI: Address match interrupt enable
+ * @arg I2C_IT_RXI: RX interrupt enable
+ * @arg I2C_IT_TXI: TX interrupt enable
+ *
+ * @retval None
+ */
+
+#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
+#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
+
+/** @brief Checks if the specified I2C interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2Cx where x: 1 or 2 to select the I2C peripheral.
+ * @param __INTERRUPT__: specifies the I2C interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2C_IT_ERRI: Errors interrupt enable
+ * @arg I2C_IT_TCI: Transfer complete interrupt enable
+ * @arg I2C_IT_STOPI: STOP detection interrupt enable
+ * @arg I2C_IT_NACKI: NACK received interrupt enable
+ * @arg I2C_IT_ADDRI: Address match interrupt enable
+ * @arg I2C_IT_RXI: RX interrupt enable
+ * @arg I2C_IT_TXI: TX interrupt enable
+ *
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified I2C flag is set or not.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2Cx where x: 1 or 2 to select the I2C peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2C_FLAG_TXE: Transmit data register empty
+ * @arg I2C_FLAG_TXIS: Transmit interrupt status
+ * @arg I2C_FLAG_RXNE: Receive data register not empty
+ * @arg I2C_FLAG_ADDR: Address matched (slave mode)
+ * @arg I2C_FLAG_AF: Acknowledge failure received flag
+ * @arg I2C_FLAG_STOPF: STOP detection flag
+ * @arg I2C_FLAG_TC: Transfer complete (master mode)
+ * @arg I2C_FLAG_TCR: Transfer complete reload
+ * @arg I2C_FLAG_BERR: Bus error
+ * @arg I2C_FLAG_ARLO: Arbitration lost
+ * @arg I2C_FLAG_OVR: Overrun/Underrun
+ * @arg I2C_FLAG_PECERR: PEC error in reception
+ * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow detection flag
+ * @arg I2C_FLAG_ALERT: SMBus alert
+ * @arg I2C_FLAG_BUSY: Bus busy
+ * @arg I2C_FLAG_DIR: Transfer direction (slave mode)
+ *
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the I2C pending flags which are cleared by writing 1 in a specific bit.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2Cx where x: 1 or 2 to select the I2C peripheral.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg I2C_FLAG_ADDR: Address matched (slave mode)
+ * @arg I2C_FLAG_AF: Acknowledge failure flag
+ * @arg I2C_FLAG_STOPF: STOP detection flag
+ * @arg I2C_FLAG_BERR: Bus error
+ * @arg I2C_FLAG_ARLO: Arbitration lost
+ * @arg I2C_FLAG_OVR: Overrun/Underrun
+ * @arg I2C_FLAG_PECERR: PEC error in reception
+ * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow detection flag
+ * @arg I2C_FLAG_ALERT: SMBus alert
+ *
+ * @retval None
+ */
+#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+
+#define __HAL_I2C_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= I2C_CR1_PE)
+#define __HAL_I2C_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~I2C_CR1_PE)
+
+#define __HAL_I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
+
+#define __HAL_I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00))) >> 8)))
+#define __HAL_I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FF))))
+
+#define __HAL_I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
+ (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
+
+#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= (uint32_t)0x000003FF)
+#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FF)
+/**
+ * @}
+ */
+
+/* Include I2C HAL Extended module */
+#include "stm32f0xx_hal_i2c_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2C_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DeInit (I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
+
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+
+ /******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+
+ /******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+ /******* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+ /******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
+
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @{
+ */
+
+/* Peripheral State and Errors functions **************************************/
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
+uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F0xx_HAL_I2C_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_i2c_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,132 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_i2c_ex.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of I2C HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_I2C_EX_H
+#define __STM32F0xx_HAL_I2C_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2CEx I2CEx Extended HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2CEx_Exported_Constants I2CEx Exported Constants
+ * @{
+ */
+
+/** @defgroup I2CEx_Analog_Filter I2CEx Analog Filter
+ * @{
+ */
+#define I2C_ANALOGFILTER_ENABLED ((uint32_t)0x00000000)
+#define I2C_ANALOGFILTER_DISABLED I2C_CR1_ANFOFF
+
+#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLED) || \
+ ((FILTER) == I2C_ANALOGFILTER_DISABLED))
+/**
+ * @}
+ */
+
+/** @defgroup I2CEx_Digital_Filter I2CEx Digital Filter
+ * @{
+ */
+#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup I2CEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup I2CEx_Exported_Functions_Group1 Extended features functions
+ * @brief Extended features functions
+ * @{
+ */
+
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_I2CEx_AnalogFilter_Config(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter);
+HAL_StatusTypeDef HAL_I2CEx_DigitalFilter_Config(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter);
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp (I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp (I2C_HandleTypeDef *hi2c);
+#endif /* !(STM32F030x6) && !(STM32F030x8) && !(STM32F070x6) && !(STM32F070xB) && !(STM32F030xC) */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_I2C_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_i2s.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,453 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_i2s.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of I2S HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_I2S_H
+#define __STM32F0xx_HAL_I2S_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F031x6) || defined(STM32F038xx) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2S
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2S_Exported_Types I2S Exported Types
+ * @{
+ */
+
+/**
+ * @brief I2S Init structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Specifies the I2S operating mode.
+ This parameter can be a value of @ref I2S_Mode */
+
+ uint32_t Standard; /*!< Specifies the standard used for the I2S communication.
+ This parameter can be a value of @ref I2S_Standard */
+
+ uint32_t DataFormat; /*!< Specifies the data format for the I2S communication.
+ This parameter can be a value of @ref I2S_Data_Format */
+
+ uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not.
+ This parameter can be a value of @ref I2S_MCLK_Output */
+
+ uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication.
+ This parameter can be a value of @ref I2S_Audio_Frequency */
+
+ uint32_t CPOL; /*!< Specifies the idle state of the I2S clock.
+ This parameter can be a value of @ref I2S_Clock_Polarity */
+}I2S_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_I2S_STATE_RESET = 0x00, /*!< I2S not yet initialized or disabled */
+ HAL_I2S_STATE_READY = 0x01, /*!< I2S initialized and ready for use */
+ HAL_I2S_STATE_BUSY = 0x02, /*!< I2S internal process is ongoing */
+ HAL_I2S_STATE_BUSY_TX = 0x03, /*!< Data Transmission process is ongoing */
+ HAL_I2S_STATE_BUSY_RX = 0x04, /*!< Data Reception process is ongoing */
+ HAL_I2S_STATE_PAUSE = 0x06, /*!< I2S pause state: used in case of DMA */
+ HAL_I2S_STATE_ERROR = 0x07 /*!< I2S error state */
+}HAL_I2S_StateTypeDef;
+
+/**
+ * @brief I2S handle Structure definition
+ */
+typedef struct
+{
+ SPI_TypeDef *Instance; /*!< I2S registers base address */
+
+ I2S_InitTypeDef Init; /*!< I2S communication parameters */
+
+ uint16_t *pTxBuffPtr; /*!< Pointer to I2S Tx transfer buffer */
+
+ __IO uint16_t TxXferSize; /*!< I2S Tx transfer size */
+
+ __IO uint16_t TxXferCount; /*!< I2S Tx transfer Counter */
+
+ uint16_t *pRxBuffPtr; /*!< Pointer to I2S Rx transfer buffer */
+
+ __IO uint16_t RxXferSize; /*!< I2S Rx transfer size */
+
+ __IO uint16_t RxXferCount; /*!< I2S Rx transfer counter
+ (This field is initialized at the
+ same value as transfer size at the
+ beginning of the transfer and
+ decremented when a sample is received.
+ NbSamplesReceived = RxBufferSize-RxBufferCount) */
+
+ DMA_HandleTypeDef *hdmatx; /*!< I2S Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< I2S Rx DMA handle parameters */
+
+ __IO HAL_LockTypeDef Lock; /*!< I2S locking object */
+
+ __IO HAL_I2S_StateTypeDef State; /*!< I2S communication state */
+
+ __IO uint32_t ErrorCode; /*!< I2S Error code
+ This parameter can be a value of @ref I2S_Error */
+
+}I2S_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup I2S_Exported_Constants I2S Exported Constants
+ * @{
+ */
+/** @defgroup I2S_Error I2S Error
+ * @{
+ */
+#define HAL_I2S_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_I2S_ERROR_TIMEOUT ((uint32_t)0x00000001) /*!< Timeout error */
+#define HAL_I2S_ERROR_OVR ((uint32_t)0x00000002) /*!< OVR error */
+#define HAL_I2S_ERROR_UDR ((uint32_t)0x00000004) /*!< UDR error */
+#define HAL_I2S_ERROR_DMA ((uint32_t)0x00000008) /*!< DMA transfer error */
+#define HAL_I2S_ERROR_UNKNOW ((uint32_t)0x00000010) /*!< Unknow Error error */
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Mode I2S Mode
+ * @{
+ */
+#define I2S_MODE_SLAVE_TX ((uint32_t)0x00000000)
+#define I2S_MODE_SLAVE_RX ((uint32_t)0x00000100)
+#define I2S_MODE_MASTER_TX ((uint32_t)0x00000200)
+#define I2S_MODE_MASTER_RX ((uint32_t)0x00000300)
+
+#define IS_I2S_MODE(MODE) (((MODE) == I2S_MODE_SLAVE_TX) || \
+ ((MODE) == I2S_MODE_SLAVE_RX) || \
+ ((MODE) == I2S_MODE_MASTER_TX)|| \
+ ((MODE) == I2S_MODE_MASTER_RX))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Standard I2S Standard
+ * @{
+ */
+#define I2S_STANDARD_PHILIPS ((uint32_t)0x00000000)
+#define I2S_STANDARD_MSB ((uint32_t)0x00000010)
+#define I2S_STANDARD_LSB ((uint32_t)0x00000020)
+#define I2S_STANDARD_PCM_SHORT ((uint32_t)0x00000030)
+#define I2S_STANDARD_PCM_LONG ((uint32_t)0x000000B0)
+
+#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_STANDARD_PHILIPS) || \
+ ((STANDARD) == I2S_STANDARD_MSB) || \
+ ((STANDARD) == I2S_STANDARD_LSB) || \
+ ((STANDARD) == I2S_STANDARD_PCM_SHORT) || \
+ ((STANDARD) == I2S_STANDARD_PCM_LONG))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Data_Format I2S Data Format
+ * @{
+ */
+#define I2S_DATAFORMAT_16B ((uint32_t)0x00000000)
+#define I2S_DATAFORMAT_16B_EXTENDED ((uint32_t)0x00000001)
+#define I2S_DATAFORMAT_24B ((uint32_t)0x00000003)
+#define I2S_DATAFORMAT_32B ((uint32_t)0x00000005)
+
+#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DATAFORMAT_16B) || \
+ ((FORMAT) == I2S_DATAFORMAT_16B_EXTENDED) || \
+ ((FORMAT) == I2S_DATAFORMAT_24B) || \
+ ((FORMAT) == I2S_DATAFORMAT_32B))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_MCLK_Output I2S MCLK Output
+ * @{
+ */
+#define I2S_MCLKOUTPUT_ENABLE ((uint32_t)SPI_I2SPR_MCKOE)
+#define I2S_MCLKOUTPUT_DISABLE ((uint32_t)0x00000000)
+
+#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOUTPUT_ENABLE) || \
+ ((OUTPUT) == I2S_MCLKOUTPUT_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Audio_Frequency I2S Audio Frequency
+ * @{
+ */
+#define I2S_AUDIOFREQ_192K ((uint32_t)192000)
+#define I2S_AUDIOFREQ_96K ((uint32_t)96000)
+#define I2S_AUDIOFREQ_48K ((uint32_t)48000)
+#define I2S_AUDIOFREQ_44K ((uint32_t)44100)
+#define I2S_AUDIOFREQ_32K ((uint32_t)32000)
+#define I2S_AUDIOFREQ_22K ((uint32_t)22050)
+#define I2S_AUDIOFREQ_16K ((uint32_t)16000)
+#define I2S_AUDIOFREQ_11K ((uint32_t)11025)
+#define I2S_AUDIOFREQ_8K ((uint32_t)8000)
+#define I2S_AUDIOFREQ_DEFAULT ((uint32_t)2)
+
+#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AUDIOFREQ_8K) && \
+ ((FREQ) <= I2S_AUDIOFREQ_192K)) || \
+ ((FREQ) == I2S_AUDIOFREQ_DEFAULT))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Clock_Polarity I2S Clock Polarity
+ * @{
+ */
+#define I2S_CPOL_LOW ((uint32_t)0x00000000)
+#define I2S_CPOL_HIGH ((uint32_t)SPI_I2SCFGR_CKPOL)
+
+#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_LOW) || \
+ ((CPOL) == I2S_CPOL_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Interrupt_configuration_definition I2S Interrupt configuration definition
+ * @{
+ */
+#define I2S_IT_TXE SPI_CR2_TXEIE
+#define I2S_IT_RXNE SPI_CR2_RXNEIE
+#define I2S_IT_ERR SPI_CR2_ERRIE
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Flag_definition I2S Flag definition
+ * @{
+ */
+#define I2S_FLAG_TXE SPI_SR_TXE
+#define I2S_FLAG_RXNE SPI_SR_RXNE
+
+#define I2S_FLAG_UDR SPI_SR_UDR
+#define I2S_FLAG_OVR SPI_SR_OVR
+#define I2S_FLAG_FRE SPI_SR_FRE
+
+#define I2S_FLAG_CHSIDE SPI_SR_CHSIDE
+#define I2S_FLAG_BSY SPI_SR_BSY
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup I2S_Exported_macros I2S Exported Macros
+ * @{
+ */
+
+/** @brief Reset I2S handle state
+ * @param __HANDLE__: I2S handle.
+ * @retval None
+ */
+#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET)
+
+/** @brief Enable or disable the specified SPI peripheral (in I2S mode).
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR |= SPI_I2SCFGR_I2SE)
+#define __HAL_I2S_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR &= (uint16_t)(~SPI_I2SCFGR_I2SE))
+
+/** @brief Enable or disable the specified I2S interrupts.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (uint16_t)(~(__INTERRUPT__)))
+
+/** @brief Checks if the specified I2S interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral.
+ * @param __INTERRUPT__: specifies the I2S interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified I2S flag is set or not.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_FLAG_RXNE: Receive buffer not empty flag
+ * @arg I2S_FLAG_TXE: Transmit buffer empty flag
+ * @arg I2S_FLAG_UDR: Underrun flag
+ * @arg I2S_FLAG_OVR: Overrun flag
+ * @arg I2S_FLAG_FRE: Frame error flag
+ * @arg I2S_FLAG_CHSIDE: Channel Side flag
+ * @arg I2S_FLAG_BSY: Busy flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the I2S OVR pending flag.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) do{ \
+ __IO uint32_t tmpreg; \
+ tmpreg = (__HANDLE__)->Instance->DR; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg); \
+ }while(0)
+/** @brief Clears the I2S UDR pending flag.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__) do{\
+ __IO uint32_t tmpreg;\
+ tmpreg = ((__HANDLE__)->Instance->SR);\
+ UNUSED(tmpreg); \
+ }while(0)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2S_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup I2S_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DeInit (I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+
+/** @addtogroup I2S_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ***************************************************/
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+
+HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s);
+
+/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
+void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+
+/** @addtogroup I2S_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control and State functions ************************************/
+HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s);
+uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* defined(STM32F031x6) || defined(STM32F038xx) || */
+ /* defined(STM32F051x8) || defined(STM32F058xx) || */
+ /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) ||*/
+ /* defined(STM32F042x6) || defined(STM32F048xx) || */
+ /* defined(STM32F091xC) || defined(STM32F098xx) */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F0xx_HAL_I2S_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_irda.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,631 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_irda.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief This file contains all the functions prototypes for the IRDA
+ * firmware library.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_IRDA_H
+#define __STM32F0xx_HAL_IRDA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup IRDA
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Types IRDA Exported Types
+ * @{
+ */
+
+/**
+ * @brief IRDA Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate.
+ The baud rate register is computed using the following formula:
+ Baud Rate Register = ((PCLKx) / ((hirda->Init.BaudRate))) */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref IRDAEx_Word_Length */
+
+ uint16_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref IRDA_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint16_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref IRDA_Mode */
+
+ uint8_t Prescaler; /*!< Specifies the Prescaler value for dividing the UART/USART source clock
+ to achieve low-power frequency.
+ @note Prescaler value 0 is forbidden */
+
+ uint16_t PowerMode; /*!< Specifies the IRDA power mode.
+ This parameter can be a value of @ref IRDA_Low_Power */
+}IRDA_InitTypeDef;
+
+/**
+ * @brief HAL IRDA State structures definition
+ */
+typedef enum
+{
+ HAL_IRDA_STATE_RESET = 0x00, /*!< Peripheral is not initialized */
+ HAL_IRDA_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_IRDA_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_IRDA_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_IRDA_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_IRDA_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_IRDA_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_IRDA_STATE_ERROR = 0x04 /*!< Error */
+}HAL_IRDA_StateTypeDef;
+
+/**
+ * @brief IRDA clock sources definition
+ */
+typedef enum
+{
+ IRDA_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */
+ IRDA_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */
+ IRDA_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */
+ IRDA_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */
+ IRDA_CLOCKSOURCE_UNDEFINED = 0x10 /*!< undefined clock source */
+}IRDA_ClockSourceTypeDef;
+
+/**
+ * @brief IRDA handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /*!< USART registers base address */
+
+ IRDA_InitTypeDef Init; /*!< IRDA communication parameters */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to IRDA Tx transfer Buffer */
+
+ uint16_t TxXferSize; /*!< IRDA Tx Transfer size */
+
+ uint16_t TxXferCount; /*!< IRDA Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /*!< Pointer to IRDA Rx transfer Buffer */
+
+ uint16_t RxXferSize; /*!< IRDA Rx Transfer size */
+
+ uint16_t RxXferCount; /*!< IRDA Rx Transfer Counter */
+
+ uint16_t Mask; /*!< USART RX RDR register mask */
+
+ DMA_HandleTypeDef *hdmatx; /*!< IRDA Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< IRDA Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ HAL_IRDA_StateTypeDef State; /*!< IRDA communication state */
+
+ __IO uint32_t ErrorCode; /*!< IRDA Error code
+ This parameter can be a value of @ref IRDA_Error */
+
+}IRDA_HandleTypeDef;
+
+/**
+ * @brief IRDA Configuration enumeration values definition
+ */
+typedef enum
+{
+ IRDA_BAUDRATE = 0x00,
+ IRDA_PARITY = 0x01,
+ IRDA_WORDLENGTH = 0x02,
+ IRDA_MODE = 0x03,
+ IRDA_PRESCALER = 0x04,
+ IRDA_POWERMODE = 0x05
+}IRDA_ControlTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Constants IRDA Exported constants
+ * @{
+ */
+
+/** @defgroup IRDA_Error IRDA Error
+ * @{
+ */
+#define HAL_IRDA_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_IRDA_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */
+#define HAL_IRDA_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */
+#define HAL_IRDA_ERROR_FE ((uint32_t)0x00000004) /*!< frame error */
+#define HAL_IRDA_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */
+#define HAL_IRDA_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Parity IRDA Parity
+ * @{
+ */
+#define IRDA_PARITY_NONE ((uint16_t)0x0000)
+#define IRDA_PARITY_EVEN ((uint16_t)USART_CR1_PCE)
+#define IRDA_PARITY_ODD ((uint16_t)(USART_CR1_PCE | USART_CR1_PS))
+#define IS_IRDA_PARITY(PARITY) (((PARITY) == IRDA_PARITY_NONE) || \
+ ((PARITY) == IRDA_PARITY_EVEN) || \
+ ((PARITY) == IRDA_PARITY_ODD))
+/**
+ * @}
+ */
+
+
+/** @defgroup IRDA_Transfer_Mode IRDA Transfer Mode
+ * @{
+ */
+#define IRDA_MODE_RX ((uint16_t)USART_CR1_RE)
+#define IRDA_MODE_TX ((uint16_t)USART_CR1_TE)
+#define IRDA_MODE_TX_RX ((uint16_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_IRDA_TX_RX_MODE(MODE) ((((MODE) & ((uint16_t)(~((uint16_t)(IRDA_MODE_TX_RX))))) == (uint16_t)0x00) && ((MODE) != (uint16_t)0x00))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Low_Power IRDA Low Power
+ * @{
+ */
+#define IRDA_POWERMODE_NORMAL ((uint16_t)0x0000)
+#define IRDA_POWERMODE_LOWPOWER ((uint16_t)USART_CR3_IRLP)
+#define IS_IRDA_POWERMODE(MODE) (((MODE) == IRDA_POWERMODE_LOWPOWER) || \
+ ((MODE) == IRDA_POWERMODE_NORMAL))
+/**
+ * @}
+ */
+
+ /** @defgroup IRDA_State IRDA State
+ * @{
+ */
+#define IRDA_STATE_DISABLE ((uint16_t)0x0000)
+#define IRDA_STATE_ENABLE ((uint16_t)USART_CR1_UE)
+#define IS_IRDA_STATE(STATE) (((STATE) == IRDA_STATE_DISABLE) || \
+ ((STATE) == IRDA_STATE_ENABLE))
+/**
+ * @}
+ */
+
+ /** @defgroup IRDA_Mode IRDA Mode
+ * @{
+ */
+#define IRDA_MODE_DISABLE ((uint16_t)0x0000)
+#define IRDA_MODE_ENABLE ((uint16_t)USART_CR3_IREN)
+#define IS_IRDA_MODE(STATE) (((STATE) == IRDA_MODE_DISABLE) || \
+ ((STATE) == IRDA_MODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_One_Bit IRDA One Bit Sampling
+ * @{
+ */
+#define IRDA_ONE_BIT_SAMPLE_DISABLED ((uint16_t)0x00000000)
+#define IRDA_ONE_BIT_SAMPLE_ENABLED ((uint16_t)USART_CR3_ONEBIT)
+#define IS_IRDA_ONEBIT_SAMPLE(ONEBIT) (((ONEBIT) == IRDA_ONE_BIT_SAMPLE_DISABLED) || \
+ ((ONEBIT) == IRDA_ONE_BIT_SAMPLE_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_DMA_Tx IRDA DMA Tx
+ * @{
+ */
+#define IRDA_DMA_TX_DISABLE ((uint16_t)0x00000000)
+#define IRDA_DMA_TX_ENABLE ((uint16_t)USART_CR3_DMAT)
+#define IS_IRDA_DMA_TX(DMATX) (((DMATX) == IRDA_DMA_TX_DISABLE) || \
+ ((DMATX) == IRDA_DMA_TX_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_DMA_Rx IRDA DMA Rx
+ * @{
+ */
+#define IRDA_DMA_RX_DISABLE ((uint16_t)0x0000)
+#define IRDA_DMA_RX_ENABLE ((uint16_t)USART_CR3_DMAR)
+#define IS_IRDA_DMA_RX(DMARX) (((DMARX) == IRDA_DMA_RX_DISABLE) || \
+ ((DMARX) == IRDA_DMA_RX_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Flags IRDA Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the ISR register
+ * @{
+ */
+#define IRDA_FLAG_REACK ((uint32_t)0x00400000)
+#define IRDA_FLAG_TEACK ((uint32_t)0x00200000)
+#define IRDA_FLAG_BUSY ((uint32_t)0x00010000)
+#define IRDA_FLAG_ABRF ((uint32_t)0x00008000)
+#define IRDA_FLAG_ABRE ((uint32_t)0x00004000)
+#define IRDA_FLAG_TXE ((uint32_t)0x00000080)
+#define IRDA_FLAG_TC ((uint32_t)0x00000040)
+#define IRDA_FLAG_RXNE ((uint32_t)0x00000020)
+#define IRDA_FLAG_ORE ((uint32_t)0x00000008)
+#define IRDA_FLAG_NE ((uint32_t)0x00000004)
+#define IRDA_FLAG_FE ((uint32_t)0x00000002)
+#define IRDA_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Interrupt_definition IRDA Interrupt Definition
+ * Elements values convention: 0000ZZZZ0XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ * @{
+ */
+#define IRDA_IT_PE ((uint16_t)0x0028)
+#define IRDA_IT_TXE ((uint16_t)0x0727)
+#define IRDA_IT_TC ((uint16_t)0x0626)
+#define IRDA_IT_RXNE ((uint16_t)0x0525)
+#define IRDA_IT_IDLE ((uint16_t)0x0424)
+
+
+
+/** Elements values convention: 000000000XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ */
+#define IRDA_IT_ERR ((uint16_t)0x0060)
+
+/** Elements values convention: 0000ZZZZ00000000b
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ */
+#define IRDA_IT_ORE ((uint16_t)0x0300)
+#define IRDA_IT_NE ((uint16_t)0x0200)
+#define IRDA_IT_FE ((uint16_t)0x0100)
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_IT_CLEAR_Flags IRDA Interruption Clear Flags
+ * @{
+ */
+#define IRDA_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
+#define IRDA_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
+#define IRDA_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
+#define IRDA_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
+#define IRDA_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
+/**
+ * @}
+ */
+
+
+
+/** @defgroup IRDA_Request_Parameters IRDA Request Parameters
+ * @{
+ */
+#define IRDA_AUTOBAUD_REQUEST ((uint16_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */
+#define IRDA_RXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
+#define IRDA_TXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
+#define IS_IRDA_REQUEST_PARAMETER(PARAM) (((PARAM) == IRDA_AUTOBAUD_REQUEST) || \
+ ((PARAM) == IRDA_RXDATA_FLUSH_REQUEST) || \
+ ((PARAM) == IRDA_TXDATA_FLUSH_REQUEST))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Interruption_Mask IRDA interruptions flag mask
+ * @{
+ */
+#define IRDA_IT_MASK ((uint16_t)0x001F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Macros IRDA Exported Macros
+ * @{
+ */
+
+/** @brief Reset IRDA handle state
+ * @param __HANDLE__: IRDA handle.
+ * @retval None
+ */
+#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IRDA_STATE_RESET)
+
+/** @brief Checks whether the specified IRDA flag is set or not.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_FLAG_REACK: Receive enable ackowledge flag
+ * @arg IRDA_FLAG_TEACK: Transmit enable ackowledge flag
+ * @arg IRDA_FLAG_BUSY: Busy flag
+ * @arg IRDA_FLAG_ABRF: Auto Baud rate detection flag
+ * @arg IRDA_FLAG_ABRE: Auto Baud rate detection error flag
+ * @arg IRDA_FLAG_TXE: Transmit data register empty flag
+ * @arg IRDA_FLAG_TC: Transmission Complete flag
+ * @arg IRDA_FLAG_RXNE: Receive data register not empty flag
+ * @arg IRDA_FLAG_IDLE: Idle Line detection flag
+ * @arg IRDA_FLAG_ORE: OverRun Error flag
+ * @arg IRDA_FLAG_NE: Noise Error flag
+ * @arg IRDA_FLAG_FE: Framing Error flag
+ * @arg IRDA_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Enables the specified IRDA interrupt.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __INTERRUPT__: specifies the IRDA interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & IRDA_IT_MASK))))
+
+/** @brief Disables the specified IRDA interrupt.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __INTERRUPT__: specifies the IRDA interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & IRDA_IT_MASK))))
+
+
+/** @brief Checks whether the specified IRDA interrupt has occurred or not.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __IT__: specifies the IRDA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg IRDA_IT_ORE: OverRun Error interrupt
+ * @arg IRDA_IT_NE: Noise Error interrupt
+ * @arg IRDA_IT_FE: Framing Error interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_IRDA_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1U << ((__IT__)>> 0x08)))
+
+/** @brief Checks whether the specified IRDA interrupt source is enabled.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __IT__: specifies the IRDA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg IRDA_IT_ORE: OverRun Error interrupt
+ * @arg IRDA_IT_NE: Noise Error interrupt
+ * @arg IRDA_IT_FE: Framing Error interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5U) == 2)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & IRDA_IT_MASK)))
+
+
+/** @brief Clears the specified IRDA ISR flag, in setting the proper ICR register flag.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+ * to clear the corresponding interrupt
+ * This parameter can be one of the following values:
+ * @arg IRDA_CLEAR_PEF: Parity Error Clear Flag
+ * @arg IRDA_CLEAR_FEF: Framing Error Clear Flag
+ * @arg IRDA_CLEAR_NEF: Noise detected Clear Flag
+ * @arg IRDA_CLEAR_OREF: OverRun Error Clear Flag
+ * @arg IRDA_CLEAR_TCF: Transmission Complete Clear Flag
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
+
+
+/** @brief Set a specific IRDA request flag.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __REQ__: specifies the request flag to set
+ * This parameter can be one of the following values:
+ * @arg IRDA_AUTOBAUD_REQUEST: Auto-Baud Rate Request
+ * @arg IRDA_RXDATA_FLUSH_REQUEST: Receive Data flush Request
+ * @arg IRDA_TXDATA_FLUSH_REQUEST: Transmit data flush Request
+ *
+ * @retval None
+ */
+#define __HAL_IRDA_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
+
+
+
+/** @brief Enable UART/USART associated to IRDA Handle
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @retval None
+ */
+#define __HAL_IRDA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable UART/USART associated to IRDA Handle
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @retval None
+ */
+#define __HAL_IRDA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/** @brief Ensure that IRDA Baud rate is less or equal to maximum value
+ * @param __BAUDRATE__: specifies the IRDA Baudrate set by the user.
+ * @retval True or False
+ */
+#define IS_IRDA_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 115201)
+
+/** @brief Ensure that IRDA prescaler value is strictly larger than 0
+ * @param __PRESCALER__: specifies the IRDA prescaler value set by the user.
+ * @retval True or False
+ */
+#define IS_IRDA_PRESCALER(__PRESCALER__) ((__PRESCALER__) > 0)
+
+/**
+ * @}
+ */
+
+/* Include IRDA HAL Extended module */
+#include "stm32f0xx_hal_irda_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup IRDA_Exported_Functions IRDA Exported Functions
+ * @{
+ */
+
+/** @addtogroup IRDA_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda);
+
+/**
+ * @}
+ */
+
+/** @addtogroup IRDA_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda);
+
+/**
+ * @}
+ */
+
+/** @addtogroup IRDA_Exported_Functions_Group3
+ * @{
+ */
+
+/* Peripheral State and Error functions ***************************************/
+HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda);
+uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_IRDA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_irda_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,415 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_irda_ex.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of IRDA HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_IRDA_EX_H
+#define __STM32F0xx_HAL_IRDA_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup IRDAEx IRDAEx Extended HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IRDAEx_Exported_Constants IRDAEx Exported Constants
+ * @{
+ */
+
+/** @defgroup IRDAEx_Word_Length IRDA Word Length
+ * @{
+ */
+#if defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx)
+#define IRDA_WORDLENGTH_7B ((uint32_t)USART_CR1_M1)
+#define IRDA_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define IRDA_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
+#define IS_IRDA_WORD_LENGTH(LENGTH) (((LENGTH) == IRDA_WORDLENGTH_7B) || \
+ ((LENGTH) == IRDA_WORDLENGTH_8B) || \
+ ((LENGTH) == IRDA_WORDLENGTH_9B))
+#else
+#define IRDA_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define IRDA_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+#define IS_IRDA_WORD_LENGTH(LENGTH) (((LENGTH) == IRDA_WORDLENGTH_8B) || \
+ ((LENGTH) == IRDA_WORDLENGTH_9B))
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx)*/
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup IRDAEx_Exported_Macros IRDAEx Exported Macros
+ * @{
+ */
+
+/** @brief Reports the IRDA clock source.
+ * @param __HANDLE__: specifies the IRDA Handle
+ * @param __CLOCKSOURCE__ : output variable
+ * @retval IRDA clocking source, written in __CLOCKSOURCE__.
+ */
+
+#if defined(STM32F031x6) || defined(STM32F038xx)
+#define __HAL_IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } while(0)
+#elif defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F051x8) || defined (STM32F058xx)
+#define __HAL_IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+#define __HAL_IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F091xC) || defined(STM32F098xx)
+#define __HAL_IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART7) \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART8) \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+
+#endif /* defined(STM32F031x6) || defined(STM32F038xx) */
+
+
+/** @brief Computes the mask to apply to retrieve the received data
+ * according to the word length and to the parity bits activation.
+ * @param __HANDLE__: specifies the IRDA Handle
+ * @retval none
+ */
+#if defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx)
+#define __HAL_IRDA_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_7B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x003F ; \
+ } \
+ } \
+} while(0)
+#else
+#define __HAL_IRDA_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ } \
+} while(0)
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined(STM32F098xx) */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions ****************************/
+/* IO operation functions *****************************************************/
+/* Peripheral Control functions ***********************************************/
+/* Peripheral State and Error functions ***************************************/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_IRDA_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_iwdg.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,311 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_iwdg.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of IWDG HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_IWDG_H
+#define __STM32F0xx_HAL_IWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup IWDG
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup IWDG_Exported_Types IWDG Exported Types
+ * @{
+ */
+
+/**
+ * @brief IWDG HAL State Structure definition
+ */
+typedef enum
+{
+ HAL_IWDG_STATE_RESET = 0x00, /*!< IWDG not yet initialized or disabled */
+ HAL_IWDG_STATE_READY = 0x01, /*!< IWDG initialized and ready for use */
+ HAL_IWDG_STATE_BUSY = 0x02, /*!< IWDG internal process is ongoing */
+ HAL_IWDG_STATE_TIMEOUT = 0x03, /*!< IWDG timeout state */
+ HAL_IWDG_STATE_ERROR = 0x04 /*!< IWDG error state */
+
+}HAL_IWDG_StateTypeDef;
+
+/**
+ * @brief IWDG Init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Select the prescaler of the IWDG.
+ This parameter can be a value of @ref IWDG_Prescaler */
+
+ uint32_t Reload; /*!< Specifies the IWDG down-counter reload value.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
+
+ uint32_t Window; /*!< Specifies the window value to be compared to the down-counter.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
+
+} IWDG_InitTypeDef;
+
+/**
+ * @brief IWDG Handle Structure definition
+ */
+typedef struct
+{
+ IWDG_TypeDef *Instance; /*!< Register base address */
+
+ IWDG_InitTypeDef Init; /*!< IWDG required parameters */
+
+ HAL_LockTypeDef Lock; /*!< IWDG Locking object */
+
+ __IO HAL_IWDG_StateTypeDef State; /*!< IWDG communication state */
+
+}IWDG_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup IWDG_Exported_Constants IWDG Exported Constants
+ * @{
+ */
+
+/** @defgroup IWDG_Registers_BitMask IWDG Registers BitMask
+ * @brief IWDG registers bit mask
+ * @{
+ */
+/* --- KR Register ---*/
+/* KR register bit mask */
+#define KR_KEY_RELOAD ((uint32_t)0xAAAA) /*!< IWDG Reload Counter Enable */
+#define KR_KEY_ENABLE ((uint32_t)0xCCCC) /*!< IWDG Peripheral Enable */
+#define KR_KEY_EWA ((uint32_t)0x5555) /*!< IWDG KR Write Access Enable */
+#define KR_KEY_DWA ((uint32_t)0x0000) /*!< IWDG KR Write Access Disable */
+
+#define IS_IWDG_KR(__KR__) (((__KR__) == KR_KEY_RELOAD) || \
+ ((__KR__) == KR_KEY_ENABLE))|| \
+ ((__KR__) == KR_KEY_EWA)) || \
+ ((__KR__) == KR_KEY_DWA))
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Flag_definition IWDG Flag definition
+ * @{
+ */
+#define IWDG_FLAG_PVU ((uint32_t)IWDG_SR_PVU) /*!< Watchdog counter prescaler value update Flag */
+#define IWDG_FLAG_RVU ((uint32_t)IWDG_SR_RVU) /*!< Watchdog counter reload value update Flag */
+#define IWDG_FLAG_WVU ((uint32_t)IWDG_SR_WVU) /*!< Watchdog counter window value update Flag */
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Prescaler IWDG Prescaler
+ * @{
+ */
+#define IWDG_PRESCALER_4 ((uint8_t)0x00) /*!< IWDG prescaler set to 4 */
+#define IWDG_PRESCALER_8 ((uint8_t)(IWDG_PR_PR_0)) /*!< IWDG prescaler set to 8 */
+#define IWDG_PRESCALER_16 ((uint8_t)(IWDG_PR_PR_1)) /*!< IWDG prescaler set to 16 */
+#define IWDG_PRESCALER_32 ((uint8_t)(IWDG_PR_PR_1 | IWDG_PR_PR_0)) /*!< IWDG prescaler set to 32 */
+#define IWDG_PRESCALER_64 ((uint8_t)(IWDG_PR_PR_2)) /*!< IWDG prescaler set to 64 */
+#define IWDG_PRESCALER_128 ((uint8_t)(IWDG_PR_PR_2 | IWDG_PR_PR_0)) /*!< IWDG prescaler set to 128 */
+#define IWDG_PRESCALER_256 ((uint8_t)(IWDG_PR_PR_2 | IWDG_PR_PR_1)) /*!< IWDG prescaler set to 256 */
+
+#define IS_IWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == IWDG_PRESCALER_4) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_8) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_16) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_32) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_64) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_128)|| \
+ ((__PRESCALER__) == IWDG_PRESCALER_256))
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Reload_Value IWDG Reload Value
+ * @{
+ */
+#define IS_IWDG_RELOAD(__RELOAD__) ((__RELOAD__) <= 0xFFF)
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_CounterWindow_Value IWDG CounterWindow Value
+ * @{
+ */
+#define IS_IWDG_WINDOW(__VALUE__) ((__VALUE__) <= 0xFFF)
+/**
+ * @}
+ */
+/** @defgroup IWDG_Window_option IWDG Window option
+ * @{
+ */
+#define IWDG_WINDOW_DISABLE 0xFFF
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup IWDG_Exported_Macros IWDG Exported Macros
+ * @{
+ */
+
+/** @brief Reset IWDG handle state
+ * @param __HANDLE__: IWDG handle.
+ * @retval None
+ */
+#define __HAL_IWDG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IWDG_STATE_RESET)
+
+/**
+ * @brief Enables the IWDG peripheral.
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_START(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, KR_KEY_ENABLE)
+
+/**
+ * @brief Reloads IWDG counter with value defined in the reload register
+ * (write access to IWDG_PR and IWDG_RLR registers disabled).
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_RELOAD_COUNTER(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, KR_KEY_RELOAD)
+
+/**
+ * @brief Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers.
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_ENABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, KR_KEY_EWA)
+
+/**
+ * @brief Disable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers.
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_DISABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, KR_KEY_DWA)
+
+/**
+ * @brief Gets the selected IWDG's flag status.
+ * @param __HANDLE__: IWDG handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg IWDG_FLAG_PVU: Watchdog counter reload value update flag
+ * @arg IWDG_FLAG_RVU: Watchdog counter prescaler value flag
+ * @arg IWDG_FLAG_WVU: Watchdog counter window value flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_IWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup IWDG_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup IWDG_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg);
+void HAL_IWDG_MspInit(IWDG_HandleTypeDef *hiwdg);
+
+/**
+ * @}
+ */
+
+/** @addtogroup IWDG_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ****************************************************/
+HAL_StatusTypeDef HAL_IWDG_Start(IWDG_HandleTypeDef *hiwdg);
+HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg);
+
+/**
+ * @}
+ */
+
+/** @addtogroup IWDG_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions ************************************************/
+HAL_IWDG_StateTypeDef HAL_IWDG_GetState(IWDG_HandleTypeDef *hiwdg);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_IWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_pcd.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,783 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_pcd.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of PCD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_PCD_H
+#define __STM32F0xx_HAL_PCD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)|| defined(STM32F070x6)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup PCD_Exported_Types PCD Exported Types
+ * @{
+ */
+
+/**
+ * @brief PCD State structures definition
+ */
+typedef enum
+{
+ PCD_READY = 0x00,
+ PCD_ERROR = 0x01,
+ PCD_BUSY = 0x02,
+ PCD_TIMEOUT = 0x03
+} PCD_StateTypeDef;
+
+typedef enum
+{
+ /* double buffered endpoint direction */
+ PCD_EP_DBUF_OUT,
+ PCD_EP_DBUF_IN,
+ PCD_EP_DBUF_ERR,
+}PCD_EP_DBUF_DIR;
+
+/* endpoint buffer number */
+typedef enum
+{
+ PCD_EP_NOBUF,
+ PCD_EP_BUF0,
+ PCD_EP_BUF1
+}PCD_EP_BUF_NUM;
+
+/**
+ * @brief PCD Initialization Structure definition
+ */
+typedef struct
+{
+ uint32_t dev_endpoints; /*!< Device Endpoints number.
+ This parameter depends on the used USB core.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint32_t speed; /*!< USB Core speed.
+ This parameter can be any value of @ref PCD_Core_Speed */
+
+ uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size.
+ This parameter can be any value of @ref PCD_EP0_MPS */
+
+ uint32_t phy_itface; /*!< Select the used PHY interface.
+ This parameter can be any value of @ref PCD_Core_PHY */
+
+ uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal.
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t low_power_enable; /*!< Enable or disable Low Power mode
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t lpm_enable; /*!< Enable or disable the Link Power Management .
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t battery_charging_enable; /*!< Enable or disable Battery charging.
+ This parameter can be set to ENABLE or DISABLE */
+
+}PCD_InitTypeDef;
+
+typedef struct
+{
+ uint8_t num; /*!< Endpoint number
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint8_t is_in; /*!< Endpoint direction
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t is_stall; /*!< Endpoint stall condition
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t type; /*!< Endpoint type
+ This parameter can be any value of @ref PCD_EP_Type */
+
+ uint16_t pmaadress; /*!< PMA Address
+ This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
+
+
+ uint16_t pmaaddr0; /*!< PMA Address0
+ This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
+
+
+ uint16_t pmaaddr1; /*!< PMA Address1
+ This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
+
+
+ uint8_t doublebuffer; /*!< Double buffer enable
+ This parameter can be 0 or 1 */
+
+ uint32_t maxpacket; /*!< Endpoint Max packet size
+ This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
+
+ uint8_t *xfer_buff; /*!< Pointer to transfer buffer */
+
+
+ uint32_t xfer_len; /*!< Current transfer length */
+
+ uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */
+
+}PCD_EPTypeDef;
+
+typedef USB_TypeDef PCD_TypeDef;
+
+/**
+ * @brief PCD Handle Structure definition
+ */
+typedef struct
+{
+ PCD_TypeDef *Instance; /*!< Register base address */
+ PCD_InitTypeDef Init; /*!< PCD required parameters */
+ __IO uint8_t USB_Address; /*!< USB Address */
+ PCD_EPTypeDef IN_ep[8]; /*!< IN endpoint parameters */
+ PCD_EPTypeDef OUT_ep[8]; /*!< OUT endpoint parameters */
+ HAL_LockTypeDef Lock; /*!< PCD peripheral status */
+ __IO PCD_StateTypeDef State; /*!< PCD communication state */
+ uint32_t Setup[12]; /*!< Setup packet buffer */
+ void *pData; /*!< Pointer to upper stack Handler */
+
+} PCD_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+#include "stm32f0xx_hal_pcd_ex.h"
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PCD_Exported_Constants PCD Exported Constants
+ * @{
+ */
+
+/** @defgroup PCD_Core_Speed PCD Core Speed
+ * @{
+ */
+#define PCD_SPEED_HIGH 0 /* Not Supported */
+#define PCD_SPEED_FULL 2
+/**
+ * @}
+ */
+
+ /** @defgroup PCD_Core_PHY PCD Core PHY
+ * @{
+ */
+#define PCD_PHY_EMBEDDED 2
+/**
+ * @}
+ */
+
+/** @defgroup PCD_EP0_MPS PCD EP0 MPS
+ * @{
+ */
+#define DEP0CTL_MPS_64 0
+#define DEP0CTL_MPS_32 1
+#define DEP0CTL_MPS_16 2
+#define DEP0CTL_MPS_8 3
+
+#define PCD_EP0MPS_64 DEP0CTL_MPS_64
+#define PCD_EP0MPS_32 DEP0CTL_MPS_32
+#define PCD_EP0MPS_16 DEP0CTL_MPS_16
+#define PCD_EP0MPS_08 DEP0CTL_MPS_8
+/**
+ * @}
+ */
+
+/** @defgroup PCD_EP_Type PCD EP Type
+ * @{
+ */
+#define PCD_EP_TYPE_CTRL 0
+#define PCD_EP_TYPE_ISOC 1
+#define PCD_EP_TYPE_BULK 2
+#define PCD_EP_TYPE_INTR 3
+/**
+ * @}
+ */
+
+/** @defgroup PCD_ENDP_Type PCD_ENDP_Type
+ * @{
+ */
+
+#define PCD_ENDP0 ((uint8_t)0)
+#define PCD_ENDP1 ((uint8_t)1)
+#define PCD_ENDP2 ((uint8_t)2)
+#define PCD_ENDP3 ((uint8_t)3)
+#define PCD_ENDP4 ((uint8_t)4)
+#define PCD_ENDP5 ((uint8_t)5)
+#define PCD_ENDP6 ((uint8_t)6)
+#define PCD_ENDP7 ((uint8_t)7)
+
+/* Endpoint Kind */
+#define PCD_SNG_BUF 0
+#define PCD_DBL_BUF 1
+
+#define IS_PCD_ALL_INSTANCE IS_USB_ALL_INSTANCE
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup PCD_Exported_Macros PCD Exported Macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISTR) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) &= ~(__INTERRUPT__))
+
+#define USB_EXTI_LINE_WAKEUP ((uint32_t)0x00040000) /*!< External interrupt line 18 Connected to the USB FS EXTI Line */
+
+#define __HAL_USB_EXTI_ENABLE_IT() EXTI->IMR |= USB_EXTI_LINE_WAKEUP
+#define __HAL_USB_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_EXTI_LINE_WAKEUP)
+#define __HAL_USB_EXTI_GENERATE_SWIT(__EXTILINE__) (EXTI->SWIER |= (__EXTILINE__))
+
+/**
+ * @}
+ */
+
+/* Internal macros -----------------------------------------------------------*/
+
+/** @defgroup PCD_Private_Macros PCD Private Macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+
+/* SetENDPOINT */
+#define PCD_SET_ENDPOINT(USBx, bEpNum,wRegValue) (*(&(USBx)->EP0R + (bEpNum) * 2)= (uint16_t)(wRegValue))
+
+/* GetENDPOINT */
+#define PCD_GET_ENDPOINT(USBx, bEpNum) (*(&(USBx)->EP0R + (bEpNum) * 2))
+
+
+
+/**
+ * @brief sets the type in the endpoint register(bits EP_TYPE[1:0])
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wType: Endpoint Type.
+ * @retval None
+ */
+#define PCD_SET_EPTYPE(USBx, bEpNum,wType) (PCD_SET_ENDPOINT((USBx), (bEpNum),\
+ ((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_MASK) | (wType) )))
+
+/**
+ * @brief gets the type in the endpoint register(bits EP_TYPE[1:0])
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval Endpoint Type
+ */
+#define PCD_GET_EPTYPE(USBx, bEpNum) (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_FIELD)
+
+
+/**
+ * @brief free buffer used from the application realizing it to the line
+ toggles bit SW_BUF in the double buffered endpoint register
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param bDir: Direction
+ * @retval None
+ */
+#define PCD_FreeUserBuffer(USBx, bEpNum, bDir)\
+{\
+ if ((bDir) == PCD_EP_DBUF_OUT)\
+ { /* OUT double buffered endpoint */\
+ PCD_TX_DTOG((USBx), (bEpNum));\
+ }\
+ else if ((bDir) == PCD_EP_DBUF_IN)\
+ { /* IN double buffered endpoint */\
+ PCD_RX_DTOG((USBx), (bEpNum));\
+ }\
+}
+
+/**
+ * @brief gets direction of the double buffered endpoint
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval EP_DBUF_OUT, EP_DBUF_IN,
+ * EP_DBUF_ERR if the endpoint counter not yet programmed.
+ */
+#define PCD_GET_DB_DIR(USBx, bEpNum)\
+{\
+ if ((uint16_t)(*PCD_EP_RX_CNT((USBx), (bEpNum)) & 0xFC00) != 0)\
+ return(PCD_EP_DBUF_OUT);\
+ else if (((uint16_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x03FF) != 0)\
+ return(PCD_EP_DBUF_IN);\
+ else\
+ return(PCD_EP_DBUF_ERR);\
+}
+
+/**
+ * @brief sets the status for tx transfer (bits STAT_TX[1:0]).
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wState: new state
+ * @retval None
+ */
+#define PCD_SET_EP_TX_STATUS(USBx, bEpNum, wState) {\
+ register uint16_t _wRegVal; \
+ \
+ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_DTOGMASK;\
+ /* toggle first bit ? */ \
+ if((USB_EPTX_DTOG1 & (wState))!= 0) \
+ _wRegVal ^= USB_EPTX_DTOG1; \
+ /* toggle second bit ? */ \
+ if((USB_EPTX_DTOG2 & (wState))!= 0) \
+ _wRegVal ^= USB_EPTX_DTOG2; \
+ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX)); \
+ } /* PCD_SET_EP_TX_STATUS */
+
+/**
+ * @brief sets the status for rx transfer (bits STAT_TX[1:0])
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wState: new state
+ * @retval None
+ */
+#define PCD_SET_EP_RX_STATUS(USBx, bEpNum,wState) {\
+ register uint16_t _wRegVal; \
+ \
+ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_DTOGMASK;\
+ /* toggle first bit ? */ \
+ if((USB_EPRX_DTOG1 & (wState))!= 0) \
+ _wRegVal ^= USB_EPRX_DTOG1; \
+ /* toggle second bit ? */ \
+ if((USB_EPRX_DTOG2 & (wState))!= 0) \
+ _wRegVal ^= USB_EPRX_DTOG2; \
+ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX)); \
+ } /* PCD_SET_EP_RX_STATUS */
+
+/**
+ * @brief sets the status for rx & tx (bits STAT_TX[1:0] & STAT_RX[1:0])
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wStaterx: new state.
+ * @param wStatetx: new state.
+ * @retval None
+ */
+#define PCD_SET_EP_TXRX_STATUS(USBx,bEpNum,wStaterx,wStatetx) {\
+ register uint32_t _wRegVal; \
+ \
+ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (USB_EPRX_DTOGMASK |USB_EPTX_STAT) ;\
+ /* toggle first bit ? */ \
+ if((USB_EPRX_DTOG1 & ((wStaterx)))!= 0) \
+ _wRegVal ^= USB_EPRX_DTOG1; \
+ /* toggle second bit ? */ \
+ if((USB_EPRX_DTOG2 & (wStaterx))!= 0) \
+ _wRegVal ^= USB_EPRX_DTOG2; \
+ /* toggle first bit ? */ \
+ if((USB_EPTX_DTOG1 & (wStatetx))!= 0) \
+ _wRegVal ^= USB_EPTX_DTOG1; \
+ /* toggle second bit ? */ \
+ if((USB_EPTX_DTOG2 & (wStatetx))!= 0) \
+ _wRegVal ^= USB_EPTX_DTOG2; \
+ PCD_SET_ENDPOINT((USBx), (bEpNum), _wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX); \
+ } /* PCD_SET_EP_TXRX_STATUS */
+
+/**
+ * @brief gets the status for tx/rx transfer (bits STAT_TX[1:0]
+ * /STAT_RX[1:0])
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval status
+ */
+#define PCD_GET_EP_TX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_STAT)
+
+#define PCD_GET_EP_RX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_STAT)
+
+/**
+ * @brief sets directly the VALID tx/rx-status into the endpoint register
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_EP_TX_VALID(USBx, bEpNum) (PCD_SET_EP_TX_STATUS((USBx), (bEpNum), USB_EP_TX_VALID))
+
+#define PCD_SET_EP_RX_VALID(USBx, bEpNum) (PCD_SET_EP_RX_STATUS((USBx), (bEpNum), USB_EP_RX_VALID))
+
+/**
+ * @brief checks stall condition in an endpoint.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval TRUE = endpoint in stall condition.
+ */
+#define PCD_GET_EP_TX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_TX_STATUS((USBx), (bEpNum)) \
+ == USB_EP_TX_STALL)
+#define PCD_GET_EP_RX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_RX_STATUS((USBx), (bEpNum)) \
+ == USB_EP_RX_STALL)
+
+/**
+ * @brief set & clear EP_KIND bit.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
+ (USB_EP_CTR_RX|USB_EP_CTR_TX|((PCD_GET_ENDPOINT((USBx), (bEpNum)) | USB_EP_KIND) & USB_EPREG_MASK))))
+#define PCD_CLEAR_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
+ (USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPKIND_MASK))))
+
+/**
+ * @brief Sets/clears directly STATUS_OUT bit in the endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_OUT_STATUS(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum))
+#define PCD_CLEAR_OUT_STATUS(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum))
+
+/**
+ * @brief Sets/clears directly EP_KIND bit in the endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_EP_DBUF(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum))
+#define PCD_CLEAR_EP_DBUF(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum))
+
+/**
+ * @brief Clears bit CTR_RX / CTR_TX in the endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_CLEAR_RX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum),\
+ PCD_GET_ENDPOINT((USBx), (bEpNum)) & 0x7FFF & USB_EPREG_MASK))
+#define PCD_CLEAR_TX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum),\
+ PCD_GET_ENDPOINT((USBx), (bEpNum)) & 0xFF7F & USB_EPREG_MASK))
+
+/**
+ * @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_RX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
+ USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_RX | (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK)))
+#define PCD_TX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
+ USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_TX | (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK)))
+
+/**
+ * @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_CLEAR_RX_DTOG(USBx, bEpNum) if((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_DTOG_RX) != 0)\
+ PCD_RX_DTOG((USBx), (bEpNum))
+#define PCD_CLEAR_TX_DTOG(USBx, bEpNum) if((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_DTOG_TX) != 0)\
+ PCD_TX_DTOG((USBx), (bEpNum))
+
+/**
+ * @brief Sets address in an endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param bAddr: Address.
+ * @retval None
+ */
+#define PCD_SET_EP_ADDRESS(USBx, bEpNum,bAddr) PCD_SET_ENDPOINT((USBx), (bEpNum),\
+ USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK) | (bAddr))
+
+/**
+ * @brief Gets address in an endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_GET_EP_ADDRESS(USBx, bEpNum) ((uint8_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPADDR_FIELD))
+
+#define PCD_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t *)(((USBx)->BTABLE+(bEpNum)*8)+ ((uint32_t)(USBx) + 0x400)))
+#define PCD_EP_TX_CNT(USBx, bEpNum) ((uint16_t *)(((USBx)->BTABLE+(bEpNum)*8+2)+ ((uint32_t)(USBx) + 0x400)))
+#define PCD_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t *)(((USBx)->BTABLE+(bEpNum)*8+4)+ ((uint32_t)(USBx) + 0x400)))
+#define PCD_EP_RX_CNT(USBx, bEpNum) ((uint16_t *)(((USBx)->BTABLE+(bEpNum)*8+6)+ ((uint32_t)(USBx) + 0x400)))
+
+/**
+ * @brief sets address of the tx/rx buffer.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wAddr: address to be set (must be word aligned).
+ * @retval None
+ */
+#define PCD_SET_EP_TX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_TX_ADDRESS((USBx), (bEpNum)) = (((wAddr) >> 1) << 1))
+#define PCD_SET_EP_RX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_RX_ADDRESS((USBx), (bEpNum)) = (((wAddr) >> 1) << 1))
+
+/**
+ * @brief Gets address of the tx/rx buffer.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval address of the buffer.
+ */
+#define PCD_GET_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_TX_ADDRESS((USBx), (bEpNum)))
+#define PCD_GET_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_RX_ADDRESS((USBx), (bEpNum)))
+
+/**
+ * @brief Sets counter of rx buffer with no. of blocks.
+ * @param dwReg: Register
+ * @param wCount: Counter.
+ * @param wNBlocks: no. of Blocks.
+ * @retval None
+ */
+#define PCD_CALC_BLK32(dwReg,wCount,wNBlocks) {\
+ (wNBlocks) = (wCount) >> 5;\
+ if(((wCount) & 0x1f) == 0)\
+ (wNBlocks)--;\
+ *pdwReg = (uint16_t)(((wNBlocks) << 10) | 0x8000);\
+ }/* PCD_CALC_BLK32 */
+
+#define PCD_CALC_BLK2(dwReg,wCount,wNBlocks) {\
+ (wNBlocks) = (wCount) >> 1;\
+ if(((wCount) & 0x1) != 0)\
+ (wNBlocks)++;\
+ *pdwReg = (uint16_t)((wNBlocks) << 10);\
+ }/* PCD_CALC_BLK2 */
+
+#define PCD_SET_EP_CNT_RX_REG(dwReg,wCount) {\
+ uint16_t wNBlocks;\
+ if((wCount) > 62){PCD_CALC_BLK32((dwReg),(wCount),wNBlocks);}\
+ else {PCD_CALC_BLK2((dwReg),(wCount),wNBlocks);}\
+ }/* PCD_SET_EP_CNT_RX_REG */
+
+#define PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum,wCount) {\
+ uint16_t *pdwReg = PCD_EP_TX_CNT((USBx), (bEpNum)); \
+ PCD_SET_EP_CNT_RX_REG(pdwReg, (wCount));\
+ }
+/**
+ * @brief sets counter for the tx/rx buffer.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wCount: Counter value.
+ * @retval None
+ */
+#define PCD_SET_EP_TX_CNT(USBx, bEpNum,wCount) (*PCD_EP_TX_CNT((USBx), (bEpNum)) = (wCount))
+#define PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount) {\
+ uint16_t *pdwReg = PCD_EP_RX_CNT(USBx, bEpNum); \
+ PCD_SET_EP_CNT_RX_REG(pdwReg, wCount);\
+ }
+
+/**
+ * @brief gets counter of the tx buffer.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval Counter value
+ */
+#define PCD_GET_EP_TX_CNT(USBx, bEpNum)((uint16_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x3ff)
+#define PCD_GET_EP_RX_CNT(USBx, bEpNum)((uint16_t)(*PCD_EP_RX_CNT((USBx), (bEpNum))) & 0x3ff)
+
+/**
+ * @brief Sets buffer 0/1 address in a double buffer endpoint.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wBuf0Addr: buffer 0 address.
+ * @retval Counter value
+ */
+#define PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum,wBuf0Addr) {PCD_SET_EP_TX_ADDRESS((USBx), (bEpNum), (wBuf0Addr));}
+#define PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum,wBuf1Addr) {PCD_SET_EP_RX_ADDRESS((USBx), (bEpNum), (wBuf1Addr));}
+
+/**
+ * @brief Sets addresses in a double buffer endpoint.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wBuf0Addr: buffer 0 address.
+ * @param wBuf1Addr = buffer 1 address.
+ * @retval None
+ */
+#define PCD_SET_EP_DBUF_ADDR(USBx, bEpNum,wBuf0Addr,wBuf1Addr) { \
+ PCD_SET_EP_DBUF0_ADDR((USBx), (bEpNum), (wBuf0Addr));\
+ PCD_SET_EP_DBUF1_ADDR((USBx), (bEpNum), (wBuf1Addr));\
+ } /* PCD_SET_EP_DBUF_ADDR */
+
+/**
+ * @brief Gets buffer 0/1 address of a double buffer endpoint.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_GET_EP_DBUF0_ADDR(USBx, bEpNum) (PCD_GET_EP_TX_ADDRESS((USBx), (bEpNum)))
+#define PCD_GET_EP_DBUF1_ADDR(USBx, bEpNum) (PCD_GET_EP_RX_ADDRESS((USBx), (bEpNum)))
+
+/**
+ * @brief Gets buffer 0/1 address of a double buffer endpoint.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param bDir: endpoint dir EP_DBUF_OUT = OUT
+ * EP_DBUF_IN = IN
+ * @param wCount: Counter value
+ * @retval None
+ */
+#define PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount) { \
+ if((bDir) == PCD_EP_DBUF_OUT)\
+ /* OUT endpoint */ \
+ {PCD_SET_EP_RX_DBUF0_CNT((USBx), (bEpNum),(wCount));} \
+ else if((bDir) == PCD_EP_DBUF_IN)\
+ /* IN endpoint */ \
+ *PCD_EP_TX_CNT((USBx), (bEpNum)) = (uint32_t)(wCount); \
+ } /* SetEPDblBuf0Count*/
+
+#define PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount) { \
+ if((bDir) == PCD_EP_DBUF_OUT)\
+ /* OUT endpoint */ \
+ {PCD_SET_EP_RX_CNT((USBx), (bEpNum),(wCount));}\
+ else if((bDir) == PCD_EP_DBUF_IN)\
+ /* IN endpoint */\
+ *PCD_EP_RX_CNT((USBx), (bEpNum)) = (uint32_t)(wCount); \
+ } /* SetEPDblBuf1Count */
+
+#define PCD_SET_EP_DBUF_CNT(USBx, bEpNum, bDir, wCount) {\
+ PCD_SET_EP_DBUF0_CNT((USBx), (bEpNum), (bDir), (wCount)); \
+ PCD_SET_EP_DBUF1_CNT((USBx), (bEpNum), (bDir), (wCount)); \
+ } /* PCD_SET_EP_DBUF_CNT */
+
+/**
+ * @brief Gets buffer 0/1 rx/tx counter for double buffering.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_GET_EP_DBUF0_CNT(USBx, bEpNum) (PCD_GET_EP_TX_CNT((USBx), (bEpNum)))
+#define PCD_GET_EP_DBUF1_CNT(USBx, bEpNum) (PCD_GET_EP_RX_CNT((USBx), (bEpNum)))
+
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup PCD_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup PCD_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeInit (PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
+
+/**
+ * @}
+ */
+
+/** @addtogroup PCD_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *****************************************************/
+ /* Non Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
+
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
+
+/**
+ * @}
+ */
+
+/** @addtogroup PCD_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_ActiveRemoteWakeup(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeActiveRemoteWakeup(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/** @addtogroup PCD_Exported_Functions_Group4
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F042x6 || STM32F072xB || STM32F078xx || STM32F070xB || STM32F070x6 */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F0xx_HAL_PCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_pcd_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,103 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_pcd_ex.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of PCD HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L0xx_HAL_PCD_EX_H
+#define __STM32L0xx_HAL_PCD_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx)|| defined(STM32F070xB)|| defined(STM32F070x6)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCDEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros -----------------------------------------------------------*/
+/* Internal macros -----------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup PCDEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup PCDEx_Exported_Functions_Group2
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd,
+ uint16_t ep_addr,
+ uint16_t ep_kind,
+ uint32_t pmaadress);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F042x6 || STM32F072xB || STM32F078xx || STM32F070xB || STM32F070x6*/
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F0xx_HAL_PCD_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_pwr.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,207 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_pwr.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of PWR HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_PWR_H
+#define __STM32F0xx_HAL_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWR PWR HAL module Driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Constants PWR Exported Constants
+ * @{
+ */
+
+/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in STOP mode
+ * @{
+ */
+#define PWR_MAINREGULATOR_ON ((uint32_t)0x00000000)
+#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS
+
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
+ ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
+ * @{
+ */
+#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01)
+#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02)
+#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
+ * @{
+ */
+#define PWR_STOPENTRY_WFI ((uint8_t)0x01)
+#define PWR_STOPENTRY_WFE ((uint8_t)0x02)
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWR_Exported_Macro PWR Exported Macro
+ * @{
+ */
+
+/** @brief Check PWR flag is set or not.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
+ * was received from the WKUP pin or from the RTC alarm (Alarm A),
+ * RTC Tamper event, RTC TimeStamp event or RTC Wakeup.
+ * An additional wakeup event is detected if the WKUP pin is enabled
+ * (by setting the EWUP bit) when the WKUP pin level is already high.
+ * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
+ * resumed from StandBy mode.
+ * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
+ * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
+ * For this reason, this bit is equal to 0 after Standby or reset
+ * until the PVDE bit is set.
+ * Warning: this Flag is not available on STM32F030x8 products
+ * @arg PWR_FLAG_VREFINTRDY: This flag indicates that the internal reference
+ * voltage VREFINT is ready.
+ * Warning: this Flag is not available on STM32F030x8 products
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the PWR's pending flags.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag
+ * @arg PWR_FLAG_SB: StandBy flag
+ */
+#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2)
+
+
+/**
+ * @}
+ */
+
+/* Include PWR HAL Extension module */
+#include "stm32f0xx_hal_pwr_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup PWR_Exported_Functions PWR Exported Functions
+ * @{
+ */
+
+/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions *****************************/
+void HAL_PWR_DeInit(void);
+
+/**
+ * @}
+ */
+
+/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
+ * @{
+ */
+
+/* Peripheral Control functions **********************************************/
+void HAL_PWR_EnableBkUpAccess(void);
+void HAL_PWR_DisableBkUpAccess(void);
+
+/* WakeUp pins configuration functions ****************************************/
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
+
+/* Low Power modes configuration functions ************************************/
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
+void HAL_PWR_EnterSTANDBYMode(void);
+
+void HAL_PWR_EnableSleepOnExit(void);
+void HAL_PWR_DisableSleepOnExit(void);
+void HAL_PWR_EnableSEVOnPend(void);
+void HAL_PWR_DisableSEVOnPend(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F0xx_HAL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_pwr_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,425 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_pwr_ex.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of PWR HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_PWR_EX_H
+#define __STM32F0xx_HAL_PWR_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWREx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup PWREx_Exported_Types PWREx Exported Types
+ * @{
+ */
+
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || \
+ defined (STM32F091xC)
+
+/**
+ * @brief PWR PVD configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level
+ This parameter can be a value of @ref PWREx_PVD_detection_level */
+
+ uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref PWREx_PVD_Mode */
+}PWR_PVDTypeDef;
+
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+ /* defined (STM32F071xB) || defined (STM32F072xB) || */
+ /* defined (STM32F091xC) */
+/**
+ * @}
+ */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup PWREx_Exported_Constants PWREx Exported Constants
+ * @{
+ */
+
+
+/** @defgroup PWREx_WakeUp_Pins PWREx Wakeup Pins
+ * @{
+ */
+#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
+#define PWR_WAKEUP_PIN1 ((uint32_t)0x00)
+#define PWR_WAKEUP_PIN2 ((uint32_t)0x01)
+#define PWR_WAKEUP_PIN3 ((uint32_t)0x02)
+#define PWR_WAKEUP_PIN4 ((uint32_t)0x03)
+#define PWR_WAKEUP_PIN5 ((uint32_t)0x04)
+#define PWR_WAKEUP_PIN6 ((uint32_t)0x05)
+#define PWR_WAKEUP_PIN7 ((uint32_t)0x06)
+#define PWR_WAKEUP_PIN8 ((uint32_t)0x07)
+
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
+ ((PIN) == PWR_WAKEUP_PIN2) || \
+ ((PIN) == PWR_WAKEUP_PIN3) || \
+ ((PIN) == PWR_WAKEUP_PIN4) || \
+ ((PIN) == PWR_WAKEUP_PIN5) || \
+ ((PIN) == PWR_WAKEUP_PIN6) || \
+ ((PIN) == PWR_WAKEUP_PIN7) || \
+ ((PIN) == PWR_WAKEUP_PIN8))
+#else
+#define PWR_WAKEUP_PIN1 ((uint32_t)0x00)
+#define PWR_WAKEUP_PIN2 ((uint32_t)0x01)
+
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
+ ((PIN) == PWR_WAKEUP_PIN2))
+#endif /* defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || */
+ /* defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_EXTI_Line PWREx EXTI Line
+ * @{
+ */
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || \
+ defined (STM32F091xC)
+
+#define PWR_EXTI_LINE_PVD ((uint32_t)0x00010000) /*!< External interrupt line 16 Connected to the PVD EXTI Line */
+
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+ /* defined (STM32F071xB) || defined (STM32F072xB) || */
+ /* defined (STM32F091xC) */
+
+#if defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx)
+
+#define PWR_EXTI_LINE_VDDIO2 ((uint32_t)0x80000000) /*!< External interrupt line 31 Connected to the Vddio2 Monitor EXTI Line */
+
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) ||\
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx) ||*/
+/**
+ * @}
+ */
+
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || \
+ defined (STM32F091xC)
+/** @defgroup PWREx_PVD_detection_level PWREx PVD detection level
+ * @{
+ */
+#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0
+#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1
+#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2
+#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3
+#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4
+#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5
+#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6
+#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
+ ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
+ ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
+ ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_PVD_Mode PWREx PVD Mode
+ * @{
+ */
+#define PWR_PVD_MODE_NORMAL ((uint32_t)0x00000000) /*!< basic mode is used */
+#define PWR_PVD_MODE_IT_RISING ((uint32_t)0x00010001) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_IT_FALLING ((uint32_t)0x00010002) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_IT_RISING_FALLING ((uint32_t)0x00010003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING ((uint32_t)0x00020001) /*!< Event Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_EVENT_FALLING ((uint32_t)0x00020002) /*!< Event Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003) /*!< Event Mode with Rising/Falling edge trigger detection */
+
+#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
+ ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
+ ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
+ ((MODE) == PWR_PVD_MODE_NORMAL))
+/**
+ * @}
+ */
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+ /* defined (STM32F071xB) || defined (STM32F072xB) || */
+ /* defined (STM32F091xC) */
+
+/** @defgroup PWREx_Flag PWREx Flag
+ * @{
+ */
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || \
+ defined (STM32F091xC)
+
+#define PWR_FLAG_WU PWR_CSR_WUF
+#define PWR_FLAG_SB PWR_CSR_SBF
+#define PWR_FLAG_PVDO PWR_CSR_PVDO
+#define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF
+#elif defined (STM32F070x6) || defined (STM32F070xB) || defined (STM32F030xC)
+#define PWR_FLAG_WU PWR_CSR_WUF
+#define PWR_FLAG_SB PWR_CSR_SBF
+#define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF
+#else
+#define PWR_FLAG_WU PWR_CSR_WUF
+#define PWR_FLAG_SB PWR_CSR_SBF
+
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+ /* defined (STM32F071xB) || defined (STM32F072xB) || */
+ /* defined (STM32F091xC) */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Macros PWREx Exported Macros
+ * @{
+ */
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || \
+ defined (STM32F091xC)
+/**
+ * @brief Enable interrupt on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Disable interrupt on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Enable event on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Disable event on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief PVD EXTI line configuration: clear falling edge and rising edge trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() EXTI->FTSR &= ~(PWR_EXTI_LINE_PVD); \
+ EXTI->RTSR &= ~(PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief PVD EXTI line configuration: set falling edge trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER() EXTI->FTSR |= (PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief PVD EXTI line configuration: set rising edge trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER() EXTI->RTSR |= (PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief Check whether the specified PVD EXTI interrupt flag is set or not.
+ * @retval EXTI PVD Line Status.
+ */
+#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Clear the PVD EXTI flag.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Generate a Software interrupt on selected EXTI line.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD))
+
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+ /* defined (STM32F071xB) || defined (STM32F072xB) || */
+ /* defined (STM32F091xC) */
+
+
+#if defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx)
+/**
+ * @brief Enable interrupt on Vddio2 Monitor Exti Line 31.
+ * @retval None.
+ */
+#define __HAL_PWR_VDDIO2_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_VDDIO2))
+
+/**
+ * @brief Disable interrupt on Vddio2 Monitor Exti Line 31.
+ * @retval None.
+ */
+#define __HAL_PWR_VDDIO2_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_VDDIO2))
+
+/**
+ * @brief Vddio2 Monitor EXTI line configuration: clear falling edge and rising edge trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER() EXTI->FTSR &= ~(PWR_EXTI_LINE_VDDIO2); \
+ EXTI->RTSR &= ~(PWR_EXTI_LINE_VDDIO2)
+
+/**
+ * @brief Vddio2 Monitor EXTI line configuration: set falling edge trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER() EXTI->FTSR |= (PWR_EXTI_LINE_VDDIO2)
+
+/**
+ * @brief Check whether the specified VDDIO2 monitor EXTI interrupt flag is set or not.
+ * @retval EXTI VDDIO2 Monitor Line Status.
+ */
+#define __HAL_PWR_VDDIO2_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_VDDIO2))
+
+/**
+ * @brief Clear the VDDIO2 Monitor EXTI flag.
+ * @retval None.
+ */
+#define __HAL_PWR_VDDIO2_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_VDDIO2))
+
+/**
+ * @brief Generate a Software interrupt on selected EXTI line.
+ * @retval None.
+ */
+#define __HAL_PWR_VDDIO2_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_VDDIO2))
+
+
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) ||\
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx) */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions
+ * @{
+ */
+
+/** @addtogroup PWREx_Exported_Functions_Group1
+ * @{
+ */
+/* I/O operation functions ***************************************************/
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || \
+ defined (STM32F091xC)
+void HAL_PWR_PVD_IRQHandler(void);
+void HAL_PWR_PVDCallback(void);
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+ /* defined (STM32F071xB) || defined (STM32F072xB) || */
+ /* defined (STM32F091xC) */
+
+#if defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx)
+void HAL_PWR_Vddio2Monitor_IRQHandler(void);
+void HAL_PWR_Vddio2MonitorCallback(void);
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx) */
+
+/* Peripheral Control functions **********************************************/
+#if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || \
+ defined (STM32F091xC)
+void HAL_PWR_PVDConfig(PWR_PVDTypeDef *sConfigPVD);
+void HAL_PWR_EnablePVD(void);
+void HAL_PWR_DisablePVD(void);
+#endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */
+ /* defined (STM32F071xB) || defined (STM32F072xB) || */
+ /* defined (STM32F091xC) */
+
+#if defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx)
+void HAL_PWR_EnableVddio2Monitor(void);
+void HAL_PWR_DisableVddio2Monitor(void);
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx) */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_PWR_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_rcc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1255 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_rcc.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of RCC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_RCC_H
+#define __STM32F0xx_HAL_RCC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RCC_Exported_Types RCC Exported Types
+ * @{
+ */
+
+/**
+ * @brief RCC PLL configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PLLState; /*!< PLLState: The new state of the PLL.
+ This parameter can be a value of @ref RCC_PLL_Config */
+
+ uint32_t PLLSource; /*!< PLLSource: PLL entry clock source.
+ This parameter must be a value of @ref RCC_PLL_Clock_Source */
+
+ uint32_t PREDIV; /*!< PREDIV: Predivision factor for PLL VCO input clock
+ This parameter must be a value of @ref RCC_PLL_Prediv_Factor */
+
+ uint32_t PLLMUL; /*!< PLLMUL: Multiplication factor for PLL VCO input clock
+ This parameter must be a value of @ref RCC_PLL_Multiplication_Factor */
+
+}RCC_PLLInitTypeDef;
+
+/**
+ * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition
+ */
+typedef struct
+{
+ uint32_t OscillatorType; /*!< The Oscillators to be configured.
+ This parameter can be a value of @ref RCC_Oscillator_Type */
+
+ uint32_t HSEState; /*!< The new state of the HSE.
+ This parameter can be a value of @ref RCC_HSE_Config */
+
+ uint32_t LSEState; /*!< The new state of the LSE.
+ This parameter can be a value of @ref RCC_LSE_Config */
+
+ uint32_t HSIState; /*!< The new state of the HSI.
+ This parameter can be a value of @ref RCC_HSI_Config */
+
+ uint32_t HSICalibrationValue; /*!< The HSI calibration trimming value (default is RCC_HSICALIBRATION_DEFAULT).
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
+
+ uint32_t HSI14State; /*!< The new state of the HSI14.
+ This parameter can be a value of @ref RCC_HSI14_Config */
+
+ uint32_t HSI14CalibrationValue; /*!< The HSI14 calibration trimming value (default is RCC_HSI14CALIBRATION_DEFAULT).
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
+
+ uint32_t HSI48State; /*!< The new state of the HSI48 (only applicable to STM32F07x, STM32F0x2 and STM32F09x devices).
+ This parameter can be a value of @ref RCCEx_HSI48_Config */
+
+ uint32_t LSIState; /*!< The new state of the LSI.
+ This parameter can be a value of @ref RCC_LSI_Config */
+
+ RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */
+
+}RCC_OscInitTypeDef;
+
+/**
+ * @brief RCC System, AHB and APB busses clock configuration structure definition
+ */
+typedef struct
+{
+ uint32_t ClockType; /*!< The clock to be configured.
+ This parameter can be a value of @ref RCC_System_Clock_Type */
+
+ uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock.
+ This parameter can be a value of @ref RCC_System_Clock_Source */
+
+ uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
+ This parameter can be a value of @ref RCC_AHB_Clock_Source */
+
+ uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_APB1_Clock_Source */
+
+}RCC_ClkInitTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCC_Exported_Constants RCC Exported Constants
+ * @{
+ */
+
+/** @defgroup RCC_BitAddress_AliasRegion RCC BitAddress AliasRegion
+ * @brief RCC registers bit address in the alias region
+ * @{
+ */
+#define RCC_OFFSET (RCC_BASE - PERIPH_BASE)
+/* --- CR Register ---*/
+#define RCC_CR_OFFSET (RCC_OFFSET + 0x00)
+/* --- CFGR Register ---*/
+#define RCC_CFGR_OFFSET (RCC_OFFSET + 0x04)
+/* --- CIR Register ---*/
+#define RCC_CIR_OFFSET (RCC_OFFSET + 0x08)
+/* --- BDCR Register ---*/
+#define RCC_BDCR_OFFSET (RCC_OFFSET + 0x20)
+/* --- CSR Register ---*/
+#define RCC_CSR_OFFSET (RCC_OFFSET + 0x24)
+/* --- CR2 Register ---*/
+#define RCC_CR2_OFFSET (RCC_OFFSET + 0x34)
+
+/* CR register byte 2 (Bits[23:16]) base address */
+#define RCC_CR_BYTE2_ADDRESS (PERIPH_BASE + RCC_CR_OFFSET + 0x02)
+
+/* CIR register byte 1 (Bits[15:8]) base address */
+#define RCC_CIR_BYTE1_ADDRESS (PERIPH_BASE + RCC_CIR_OFFSET + 0x01)
+
+/* CIR register byte 2 (Bits[23:16]) base address */
+#define RCC_CIR_BYTE2_ADDRESS (PERIPH_BASE + RCC_CIR_OFFSET + 0x02)
+
+/* CSR register byte 1 (Bits[15:8]) base address */
+#define RCC_CSR_BYTE1_ADDRESS (PERIPH_BASE + RCC_CSR_OFFSET + 0x01)
+
+/* BDCR register byte 0 (Bits[7:0] base address */
+#define RCC_BDCR_BYTE0_ADDRESS (PERIPH_BASE + RCC_BDCR_OFFSET)
+
+#define RCC_CFGR_PLLMUL_BITNUMBER 18
+#define RCC_CFGR2_PREDIV_BITNUMBER 0
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Timeout RCC Timeout
+ * @{
+ */
+/* LSE state change timeout */
+#define LSE_TIMEOUT_VALUE ((uint32_t)5000) /* 5 s */
+
+/* Disable Backup domain write protection state change timeout */
+#define DBP_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Oscillator_Type RCC Oscillator Type
+ * @{
+ */
+#define RCC_OSCILLATORTYPE_NONE ((uint32_t)0x00000000)
+#define RCC_OSCILLATORTYPE_HSE ((uint32_t)0x00000001)
+#define RCC_OSCILLATORTYPE_HSI ((uint32_t)0x00000002)
+#define RCC_OSCILLATORTYPE_LSE ((uint32_t)0x00000004)
+#define RCC_OSCILLATORTYPE_LSI ((uint32_t)0x00000008)
+#define RCC_OSCILLATORTYPE_HSI14 ((uint32_t)0x00000010)
+#define RCC_OSCILLATORTYPE_HSI48 ((uint32_t)0x00000020)
+
+#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) (((OSCILLATOR) == RCC_OSCILLATORTYPE_NONE) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI14) == RCC_OSCILLATORTYPE_HSI14) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI48) == RCC_OSCILLATORTYPE_HSI48))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSE_Config RCC HSE Config
+ * @{
+ */
+#define RCC_HSE_OFF ((uint8_t)0x00)
+#define RCC_HSE_ON ((uint8_t)0x01)
+#define RCC_HSE_BYPASS ((uint8_t)0x05)
+
+#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \
+ ((HSE) == RCC_HSE_BYPASS))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSE_Config RCC_LSE_Config
+ * @{
+ */
+#define RCC_LSE_OFF ((uint8_t)0x00)
+#define RCC_LSE_ON ((uint8_t)0x01)
+#define RCC_LSE_BYPASS ((uint8_t)0x05)
+
+#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \
+ ((LSE) == RCC_LSE_BYPASS))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI_Config RCC HSI Config
+ * @{
+ */
+#define RCC_HSI_OFF ((uint8_t)0x00)
+#define RCC_HSI_ON ((uint8_t)0x01)
+
+#define IS_RCC_HSI(HSI) (((HSI) == RCC_HSI_OFF) || ((HSI) == RCC_HSI_ON))
+
+#define RCC_HSICALIBRATION_DEFAULT ((uint32_t)0x10) /* Default HSI calibration trimming value */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI14_Config RCC HSI14 Config
+ * @{
+ */
+#define RCC_HSI14_OFF ((uint32_t)0x00)
+#define RCC_HSI14_ON RCC_CR2_HSI14ON
+#define RCC_HSI14_ADC_CONTROL (~RCC_CR2_HSI14DIS)
+
+#define IS_RCC_HSI14(HSI14) (((HSI14) == RCC_HSI14_OFF) || ((HSI14) == RCC_HSI14_ON) || ((HSI14) == RCC_HSI14_ADC_CONTROL))
+
+#define RCC_HSI14CALIBRATION_DEFAULT ((uint32_t)0x10) /* Default HSI14 calibration trimming value */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSI_Config RCC LSI Config
+ * @{
+ */
+#define RCC_LSI_OFF ((uint8_t)0x00)
+#define RCC_LSI_ON ((uint8_t)0x01)
+
+#define IS_RCC_LSI(LSI) (((LSI) == RCC_LSI_OFF) || ((LSI) == RCC_LSI_ON))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Config RCC PLL Config
+ * @{
+ */
+#define RCC_PLL_NONE ((uint8_t)0x00)
+#define RCC_PLL_OFF ((uint8_t)0x01)
+#define RCC_PLL_ON ((uint8_t)0x02)
+
+#define IS_RCC_PLL(PLL) (((PLL) == RCC_PLL_NONE) ||((PLL) == RCC_PLL_OFF) || ((PLL) == RCC_PLL_ON))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Prediv_Factor RCC PLL Prediv Factor
+ * @{
+ */
+#define RCC_PREDIV_DIV1 RCC_CFGR2_PREDIV_DIV1
+#define RCC_PREDIV_DIV2 RCC_CFGR2_PREDIV_DIV2
+#define RCC_PREDIV_DIV3 RCC_CFGR2_PREDIV_DIV3
+#define RCC_PREDIV_DIV4 RCC_CFGR2_PREDIV_DIV4
+#define RCC_PREDIV_DIV5 RCC_CFGR2_PREDIV_DIV5
+#define RCC_PREDIV_DIV6 RCC_CFGR2_PREDIV_DIV6
+#define RCC_PREDIV_DIV7 RCC_CFGR2_PREDIV_DIV7
+#define RCC_PREDIV_DIV8 RCC_CFGR2_PREDIV_DIV8
+#define RCC_PREDIV_DIV9 RCC_CFGR2_PREDIV_DIV9
+#define RCC_PREDIV_DIV10 RCC_CFGR2_PREDIV_DIV10
+#define RCC_PREDIV_DIV11 RCC_CFGR2_PREDIV_DIV11
+#define RCC_PREDIV_DIV12 RCC_CFGR2_PREDIV_DIV12
+#define RCC_PREDIV_DIV13 RCC_CFGR2_PREDIV_DIV13
+#define RCC_PREDIV_DIV14 RCC_CFGR2_PREDIV_DIV14
+#define RCC_PREDIV_DIV15 RCC_CFGR2_PREDIV_DIV15
+#define RCC_PREDIV_DIV16 RCC_CFGR2_PREDIV_DIV16
+
+#define IS_RCC_PREDIV(PREDIV) (((PREDIV) == RCC_PREDIV_DIV1) || ((PREDIV) == RCC_PREDIV_DIV2) || \
+ ((PREDIV) == RCC_PREDIV_DIV3) || ((PREDIV) == RCC_PREDIV_DIV4) || \
+ ((PREDIV) == RCC_PREDIV_DIV5) || ((PREDIV) == RCC_PREDIV_DIV6) || \
+ ((PREDIV) == RCC_PREDIV_DIV7) || ((PREDIV) == RCC_PREDIV_DIV8) || \
+ ((PREDIV) == RCC_PREDIV_DIV9) || ((PREDIV) == RCC_PREDIV_DIV10) || \
+ ((PREDIV) == RCC_PREDIV_DIV11) || ((PREDIV) == RCC_PREDIV_DIV12) || \
+ ((PREDIV) == RCC_PREDIV_DIV13) || ((PREDIV) == RCC_PREDIV_DIV14) || \
+ ((PREDIV) == RCC_PREDIV_DIV15) || ((PREDIV) == RCC_PREDIV_DIV16))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Multiplication_Factor RCC PLL Multiplication Factor
+ * @{
+ */
+#define RCC_PLL_MUL2 RCC_CFGR_PLLMUL2
+#define RCC_PLL_MUL3 RCC_CFGR_PLLMUL3
+#define RCC_PLL_MUL4 RCC_CFGR_PLLMUL4
+#define RCC_PLL_MUL5 RCC_CFGR_PLLMUL5
+#define RCC_PLL_MUL6 RCC_CFGR_PLLMUL6
+#define RCC_PLL_MUL7 RCC_CFGR_PLLMUL7
+#define RCC_PLL_MUL8 RCC_CFGR_PLLMUL8
+#define RCC_PLL_MUL9 RCC_CFGR_PLLMUL9
+#define RCC_PLL_MUL10 RCC_CFGR_PLLMUL10
+#define RCC_PLL_MUL11 RCC_CFGR_PLLMUL11
+#define RCC_PLL_MUL12 RCC_CFGR_PLLMUL12
+#define RCC_PLL_MUL13 RCC_CFGR_PLLMUL13
+#define RCC_PLL_MUL14 RCC_CFGR_PLLMUL14
+#define RCC_PLL_MUL15 RCC_CFGR_PLLMUL15
+#define RCC_PLL_MUL16 RCC_CFGR_PLLMUL16
+
+#define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLL_MUL2) || ((MUL) == RCC_PLL_MUL3) || \
+ ((MUL) == RCC_PLL_MUL4) || ((MUL) == RCC_PLL_MUL5) || \
+ ((MUL) == RCC_PLL_MUL6) || ((MUL) == RCC_PLL_MUL7) || \
+ ((MUL) == RCC_PLL_MUL8) || ((MUL) == RCC_PLL_MUL9) || \
+ ((MUL) == RCC_PLL_MUL10) || ((MUL) == RCC_PLL_MUL11) || \
+ ((MUL) == RCC_PLL_MUL12) || ((MUL) == RCC_PLL_MUL13) || \
+ ((MUL) == RCC_PLL_MUL14) || ((MUL) == RCC_PLL_MUL15) || \
+ ((MUL) == RCC_PLL_MUL16))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Clock_Source RCC PLL Clock Source
+ * @{
+ */
+#define RCC_PLLSOURCE_HSE RCC_CFGR_PLLSRC_HSE_PREDIV
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Type RCC System Clock Type
+ * @{
+ */
+#define RCC_CLOCKTYPE_SYSCLK ((uint32_t)0x00000001)
+#define RCC_CLOCKTYPE_HCLK ((uint32_t)0x00000002)
+#define RCC_CLOCKTYPE_PCLK1 ((uint32_t)0x00000004)
+
+#define IS_RCC_CLOCKTYPE(CLK) ((((CLK) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) || \
+ (((CLK) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) || \
+ (((CLK) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Source RCC System Clock Source
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI
+#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE
+#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Source_Status RCC System Clock Source Status
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI
+#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE
+#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB_Clock_Source RCC AHB Clock Source
+ * @{
+ */
+#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1
+#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2
+#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4
+#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8
+#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16
+#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64
+#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128
+#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256
+#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512
+
+#define IS_RCC_SYSCLK_DIV(DIV) (((DIV) == RCC_SYSCLK_DIV1) || ((DIV) == RCC_SYSCLK_DIV2) || \
+ ((DIV) == RCC_SYSCLK_DIV4) || ((DIV) == RCC_SYSCLK_DIV8) || \
+ ((DIV) == RCC_SYSCLK_DIV16) || ((DIV) == RCC_SYSCLK_DIV64) || \
+ ((DIV) == RCC_SYSCLK_DIV128) || ((DIV) == RCC_SYSCLK_DIV256) || \
+ ((DIV) == RCC_SYSCLK_DIV512))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Clock_Source RCC APB1 Clock Source
+ * @{
+ */
+#define RCC_HCLK_DIV1 RCC_CFGR_PPRE_DIV1
+#define RCC_HCLK_DIV2 RCC_CFGR_PPRE_DIV2
+#define RCC_HCLK_DIV4 RCC_CFGR_PPRE_DIV4
+#define RCC_HCLK_DIV8 RCC_CFGR_PPRE_DIV8
+#define RCC_HCLK_DIV16 RCC_CFGR_PPRE_DIV16
+
+#define IS_RCC_HCLK_DIV(DIV) (((DIV) == RCC_HCLK_DIV1) || ((DIV) == RCC_HCLK_DIV2) || \
+ ((DIV) == RCC_HCLK_DIV4) || ((DIV) == RCC_HCLK_DIV8) || \
+ ((DIV) == RCC_HCLK_DIV16))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_RTC_Clock_Source RCC RTC Clock Source
+ * @{
+ */
+#define RCC_RTCCLKSOURCE_NONE RCC_BDCR_RTCSEL_NOCLOCK
+#define RCC_RTCCLKSOURCE_LSE RCC_BDCR_RTCSEL_LSE
+#define RCC_RTCCLKSOURCE_LSI RCC_BDCR_RTCSEL_LSI
+#define RCC_RTCCLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL_HSE
+
+#define IS_RCC_RTCCLKSOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSOURCE_NONE) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_LSI) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV32))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_USART1_Clock_Source RCC USART1 Clock Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK1 RCC_CFGR3_USART1SW_PCLK
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_I2C1_Clock_Source RCC I2C1 Clock Source
+ * @{
+ */
+#define RCC_I2C1CLKSOURCE_HSI RCC_CFGR3_I2C1SW_HSI
+#define RCC_I2C1CLKSOURCE_SYSCLK RCC_CFGR3_I2C1SW_SYSCLK
+
+#define IS_RCC_I2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C1CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C1CLKSOURCE_SYSCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCOx_Index RCC MCOx Index
+ * @{
+ */
+#define RCC_MCO ((uint32_t)0x00000000)
+
+#define IS_RCC_MCO(MCOx) ((MCOx) == RCC_MCO)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCO_Clock_Source RCC MCO Clock Source
+ * @{
+ */
+#define RCC_MCOSOURCE_NONE RCC_CFGR_MCO_NOCLOCK
+#define RCC_MCOSOURCE_LSI RCC_CFGR_MCO_LSI
+#define RCC_MCOSOURCE_LSE RCC_CFGR_MCO_LSE
+#define RCC_MCOSOURCE_SYSCLK RCC_CFGR_MCO_SYSCLK
+#define RCC_MCOSOURCE_HSI RCC_CFGR_MCO_HSI
+#define RCC_MCOSOURCE_HSE RCC_CFGR_MCO_HSE
+#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_CFGR_MCO_PLL
+#define RCC_MCOSOURCE_HSI14 RCC_CFGR_MCO_HSI14
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Interrupt RCC Interrupt
+ * @{
+ */
+#define RCC_IT_LSIRDY ((uint8_t)0x01)
+#define RCC_IT_LSERDY ((uint8_t)0x02)
+#define RCC_IT_HSIRDY ((uint8_t)0x04)
+#define RCC_IT_HSERDY ((uint8_t)0x08)
+#define RCC_IT_PLLRDY ((uint8_t)0x10)
+#define RCC_IT_HSI14 ((uint8_t)0x20)
+#define RCC_IT_CSS ((uint8_t)0x80)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flag RCC Flag
+ * Elements values convention: 0XXYYYYYb
+ * - YYYYY : Flag position in the register
+ * - XX : Register index
+ * - 00: CR register
+ * - 01: CR2 register
+ * - 10: BDCR register
+ * - 11: CSR register
+ * @{
+ */
+#define CR_REG_INDEX 0
+#define CR2_REG_INDEX 1
+#define BDCR_REG_INDEX 2
+#define CSR_REG_INDEX 3
+
+/* Flags in the CR register */
+#define RCC_CR_HSIRDY_BitNumber 1
+#define RCC_CR_HSERDY_BitNumber 17
+#define RCC_CR_PLLRDY_BitNumber 25
+
+#define RCC_FLAG_HSIRDY ((uint8_t)((CR_REG_INDEX << 5) | RCC_CR_HSIRDY_BitNumber))
+#define RCC_FLAG_HSERDY ((uint8_t)((CR_REG_INDEX << 5) | RCC_CR_HSERDY_BitNumber))
+#define RCC_FLAG_PLLRDY ((uint8_t)((CR_REG_INDEX << 5) | RCC_CR_PLLRDY_BitNumber))
+
+/* Flags in the CR2 register */
+#define RCC_CR2_HSI14RDY_BitNumber 1
+
+#define RCC_FLAG_HSI14RDY ((uint8_t)((CR2_REG_INDEX << 5) | RCC_CR2_HSI14RDY_BitNumber))
+
+/* Flags in the BDCR register */
+#define RCC_BDCR_LSERDY_BitNumber 1
+
+#define RCC_FLAG_LSERDY ((uint8_t)((BDCR_REG_INDEX << 5) | RCC_BDCR_LSERDY_BitNumber))
+
+/* Flags in the CSR register */
+#define RCC_CSR_LSIRDY_BitNumber 1
+#define RCC_CSR_V18PWRRSTF_BitNumber 23
+#define RCC_CSR_RMVF_BitNumber 24
+#define RCC_CSR_OBLRSTF_BitNumber 25
+#define RCC_CSR_PINRSTF_BitNumber 26
+#define RCC_CSR_PORRSTF_BitNumber 27
+#define RCC_CSR_SFTRSTF_BitNumber 28
+#define RCC_CSR_IWDGRSTF_BitNumber 29
+#define RCC_CSR_WWDGRSTF_BitNumber 30
+#define RCC_CSR_LPWRRSTF_BitNumber 31
+
+#define RCC_FLAG_LSIRDY ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_LSIRDY_BitNumber))
+#define RCC_FLAG_V18PWRRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_LSIRDY_BitNumber))
+#define RCC_FLAG_RMV ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_RMVF_BitNumber))
+#define RCC_FLAG_OBLRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_OBLRSTF_BitNumber))
+#define RCC_FLAG_PINRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_PINRSTF_BitNumber))
+#define RCC_FLAG_PORRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_PORRSTF_BitNumber))
+#define RCC_FLAG_SFTRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_SFTRSTF_BitNumber))
+#define RCC_FLAG_IWDGRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_IWDGRSTF_BitNumber))
+#define RCC_FLAG_WWDGRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_WWDGRSTF_BitNumber))
+#define RCC_FLAG_LPWRRST ((uint8_t)((CSR_REG_INDEX << 5) | RCC_CSR_LPWRRSTF_BitNumber))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Calibration_values RCC Calibration values
+ * @{
+ */
+#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F)
+
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_Timeout
+ * @{
+ */
+
+#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT
+#define HSI_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
+#define LSI_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
+#define LSE_TIMEOUT_VALUE ((uint32_t)5000) /* 5 s */
+#define HSI14_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
+#define HSI48_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
+#define PLL_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
+#define CLOCKSWITCH_TIMEOUT_VALUE ((uint32_t)5000) /* 5 s */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup RCC_Exported_Macros RCC Exported Macros
+ * @{
+ */
+
+/** @defgroup RCC_AHB_Clock_Enable_Disable RCC AHB Clock Enable Disable
+ * @brief Enable or disable the AHB peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __GPIOA_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOAEN))
+#define __GPIOB_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOBEN))
+#define __GPIOC_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOCEN))
+#define __GPIOF_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOFEN))
+#define __CRC_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_CRCEN))
+#define __DMA1_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_DMA1EN))
+#define __SRAM_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_SRAMEN))
+#define __FLITF_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_FLITFEN))
+
+#define __GPIOA_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOAEN))
+#define __GPIOB_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOBEN))
+#define __GPIOC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOCEN))
+#define __GPIOF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOFEN))
+#define __CRC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_CRCEN))
+#define __DMA1_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA1EN))
+#define __SRAM_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_SRAMEN))
+#define __FLITF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FLITFEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Clock_Enable_Disable RCC APB1 Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __TIM3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM3EN))
+#define __TIM14_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM14EN))
+#define __WWDG_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_WWDGEN))
+#define __I2C1_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C1EN))
+#define __PWR_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_PWREN))
+
+#define __TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
+#define __I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN))
+#define __PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Clock_Enable_Disable RCC APB2 Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __SYSCFG_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SYSCFGEN))
+#define __ADC1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_ADC1EN))
+#define __TIM1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM1EN))
+#define __SPI1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI1EN))
+#define __TIM16_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM16EN))
+#define __TIM17_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM17EN))
+#define __USART1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART1EN))
+#define __DBGMCU_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_DBGMCUEN))
+
+#define __SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN))
+#define __ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN))
+#define __TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN))
+#define __SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#define __TIM16_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM16EN))
+#define __TIM17_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM17EN))
+#define __USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
+#define __DBGMCU_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DBGMCUEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB_Force_Release_Reset RCC AHB Force Release Reset
+ * @brief Force or release AHB peripheral reset.
+ * @{
+ */
+#define __AHB_FORCE_RESET() (RCC->AHBRSTR = 0xFFFFFFFF)
+#define __GPIOA_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOARST))
+#define __GPIOB_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOBRST))
+#define __GPIOC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOCRST))
+#define __GPIOF_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOFRST))
+
+#define __AHB_RELEASE_RESET() (RCC->AHBRSTR = 0x00)
+#define __GPIOA_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOARST))
+#define __GPIOB_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOBRST))
+#define __GPIOC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOCRST))
+#define __GPIOF_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOFRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Force_Release_Reset RCC APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#define __APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFF)
+#define __TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST))
+#define __I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST))
+#define __PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST))
+
+#define __APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00)
+#define __TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST))
+#define __I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST))
+#define __PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Force_Release_Reset RCC APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#define __APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFF)
+#define __SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST))
+#define __ADC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC1RST))
+#define __TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST))
+#define __SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+#define __USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST))
+#define __TIM16_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM16RST))
+#define __TIM17_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM17RST))
+#define __DBGMCU_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_DBGMCURST))
+
+#define __APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00)
+#define __SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST))
+#define __ADC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC1RST))
+#define __TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST))
+#define __SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#define __USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST))
+#define __TIM16_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM16RST))
+#define __TIM17_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM17RST))
+#define __DBGMCU_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DBGMCURST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI_Configuration RCC HSI Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI).
+ * @note The HSI is stopped by hardware when entering STOP and STANDBY modes.
+ * It is used (enabled by hardware) as system clock source after startup
+ * from Reset, wakeup from STOP and STANDBY mode, or in case of failure
+ * of the HSE used directly or indirectly as system clock (if the Clock
+ * Security System CSS is enabled).
+ * @note HSI can not be stopped if it is used as system clock source. In this case,
+ * you have to select another source of the system clock then stop the HSI.
+ * @note After enabling the HSI, the application software should wait on HSIRDY
+ * flag to be set indicating that HSI clock is stable and can be used as
+ * system clock source.
+ * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_HSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSION)
+#define __HAL_RCC_HSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSION)
+
+/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
+ * @note The calibration is used to compensate for the variations in voltage
+ * and temperature that influence the frequency of the internal HSI RC.
+ * @param __HSICalibrationValue__: specifies the calibration trimming value
+ * (default is RCC_HSICALIBRATION_DEFAULT).
+ * This parameter must be a number between 0 and 0x1F.
+ */
+#define RCC_CR_HSITRIM_BitNumber 3
+#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) \
+ MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, (uint32_t)(__HSICalibrationValue__) << RCC_CR_HSITRIM_BitNumber)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSI_Configuration RCC LSI Configuration
+ * @{
+ */
+
+/** @brief Macro to enable or disable the Internal Low Speed oscillator (LSI).
+ * @note After enabling the LSI, the application software should wait on
+ * LSIRDY flag to be set indicating that LSI clock is stable and can
+ * be used to clock the IWDG and/or the RTC.
+ * @note LSI can not be disabled if the IWDG is running.
+ * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_LSI_ENABLE() SET_BIT(RCC->CSR, RCC_CSR_LSION)
+#define __HAL_RCC_LSI_DISABLE() CLEAR_BIT(RCC->CSR, RCC_CSR_LSION)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSE_Configuration RCC HSE Configuration
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the External High Speed oscillator (HSE).
+ * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application
+ * software should wait on HSERDY flag to be set indicating that HSE clock
+ * is stable and can be used to clock the PLL and/or system clock.
+ * @note HSE state can not be changed if it is used directly or through the
+ * PLL as system clock. In this case, you have to select another source
+ * of the system clock then change the HSE state (ex. disable it).
+ * @note The HSE is stopped by hardware when entering STOP and STANDBY modes.
+ * @note This function reset the CSSON bit, so if the Clock security system(CSS)
+ * was previously enabled you have to enable it again after calling this
+ * function.
+ * @param __STATE__: specifies the new state of the HSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after
+ * 6 HSE oscillator clock cycles.
+ * @arg RCC_HSE_ON: turn ON the HSE oscillator
+ * @arg RCC_HSE_BYPASS: HSE oscillator bypassed with external clock
+ */
+#define __HAL_RCC_HSE_CONFIG(__STATE__) (*(__IO uint8_t *)RCC_CR_BYTE2_ADDRESS = (__STATE__))
+
+/**
+ * @brief Macro to configure the External High Speed oscillator (HSE) Predivision factor for PLL.
+ * @note Predivision factor can not be changed if PLL is used as system clock
+ * In this case, you have to select another source of the system clock, disable the PLL and
+ * then change the HSE predivision factor.
+ * @param __HSEPredivValue__: specifies the division value applied to HSE.
+ * This parameter must be a number between RCC_HSE_PREDIV_DIV1 and RCC_HSE_PREDIV_DIV16.
+ */
+#define __HAL_RCC_HSE_PREDIV_CONFIG(__HSEPredivValue__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (uint32_t)(__HSEPredivValue__))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSE_Configuration RCC LSE Configuration
+ * @{
+ */
+/**
+ * @brief Macro to configure the External Low Speed oscillator (LSE).
+ * @note As the LSE is in the Backup domain and write access is denied to
+ * this domain after reset, you have to enable write access using
+ * HAL_PWR_EnableBkUpAccess() function before to configure the LSE
+ * (to be done once after reset).
+ * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application
+ * software should wait on LSERDY flag to be set indicating that LSE clock
+ * is stable and can be used to clock the RTC.
+ * @param __STATE__: specifies the new state of the LSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after
+ * 6 LSE oscillator clock cycles.
+ * @arg RCC_LSE_ON: turn ON the LSE oscillator
+ * @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock
+ */
+#define __HAL_RCC_LSE_CONFIG(__STATE__) \
+ MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEON|RCC_BDCR_LSEBYP, (uint32_t)(__STATE__))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI14_Configuration RCC_HSI14_Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the Internal 14Mhz High Speed oscillator (HSI14).
+ * @note The HSI14 is stopped by hardware when entering STOP and STANDBY modes.
+ * @note HSI14 can not be stopped if it is used as system clock source. In this case,
+ * you have to select another source of the system clock then stop the HSI14.
+ * @note After enabling the HSI14 with __HAL_RCC_HSI14_ENABLE(), the application software
+ * should wait on HSI14RDY flag to be set indicating that HSI clock is stable and can be
+ * used as system clock source. This is not necessary if HAL_RCC_OscConfig() is used.
+ * @note When the HSI14 is stopped, HSI14RDY flag goes low after 6 HSI14 oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_HSI14_ENABLE() SET_BIT(RCC->CR2, RCC_CR2_HSI14ON)
+#define __HAL_RCC_HSI14_DISABLE() CLEAR_BIT(RCC->CR2, RCC_CR2_HSI14ON)
+
+/** @brief macros to Enable or Disable the Internal 14Mhz High Speed oscillator (HSI14) usage by ADC.
+ */
+#define __HAL_RCC_HSI14ADC_ENABLE() CLEAR_BIT(RCC->CR2, RCC_CR2_HSI14DIS)
+#define __HAL_RCC_HSI14ADC_DISABLE() SET_BIT(RCC->CR2, RCC_CR2_HSI14DIS)
+
+/** @brief Macro to adjust the Internal 14Mhz High Speed oscillator (HSI) calibration value.
+ * @note The calibration is used to compensate for the variations in voltage
+ * and temperature that influence the frequency of the internal HSI14 RC.
+ * @param __HSI14CalibrationValue__: specifies the calibration trimming value
+ * (default is RCC_HSI14CALIBRATION_DEFAULT).
+ * This parameter must be a number between 0 and 0x1F.
+ */
+#define RCC_CR2_HSI14TRIM_BitNumber 3
+#define __HAL_RCC_HSI14_CALIBRATIONVALUE_ADJUST(__HSI14CalibrationValue__) \
+ MODIFY_REG(RCC->CR2, RCC_CR2_HSI14TRIM, (uint32_t)(__HSI14CalibrationValue__) << RCC_CR2_HSI14TRIM_BitNumber)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_USARTx_Clock_Config RCC USARTx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the USART1 clock (USART1CLK).
+ * @param __USART1CLKSource__: specifies the USART1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USART1CLKSOURCE_PCLK1: PCLK1 selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_SYSCLK: System Clock selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock
+ */
+#define __HAL_RCC_USART1_CONFIG(__USART1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART1SW, (uint32_t)(__USART1CLKSource__))
+
+/** @brief Macro to get the USART1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USART1CLKSOURCE_PCLK1: PCLK1 selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_SYSCLK: System Clock selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock
+ */
+#define __HAL_RCC_GET_USART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART1SW)))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_I2Cx_Clock_Config RCC I2Cx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the I2C1 clock (I2C1CLK).
+ * @param __I2C1CLKSource__: specifies the I2C1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock
+ * @arg RCC_I2C1CLKSOURCE_SYSCLK: System Clock selected as I2C1 clock
+ */
+#define __HAL_RCC_I2C1_CONFIG(__I2C1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C1SW, (uint32_t)(__I2C1CLKSource__))
+
+/** @brief Macro to get the I2C1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock
+ * @arg RCC_I2C1CLKSOURCE_SYSCLK: System Clock selected as I2C1 clock
+ */
+#define __HAL_RCC_GET_I2C1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C1SW)))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration
+ * @{
+ */
+/** @brief Macros to enable or disable the the RTC clock.
+ * @note These macros must be used only after the RTC clock source was selected.
+ */
+#define __HAL_RCC_RTC_ENABLE() SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN)
+#define __HAL_RCC_RTC_DISABLE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN)
+
+/** @brief Macro to configure the RTC clock (RTCCLK).
+ * @note As the RTC clock configuration bits are in the Backup domain and write
+ * access is denied to this domain after reset, you have to enable write
+ * access using the Power Backup Access macro before to configure
+ * the RTC clock source (to be done once after reset).
+ * @note Once the RTC clock is configured it can't be changed unless the
+ * Backup domain is reset using __HAL_RCC_BackupReset_RELEASE() macro, or by
+ * a Power On Reset (POR).
+ * @param __RTCCLKSource__: specifies the RTC clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_RTCCLKSOURCE_NONE: No clock selected as RTC clock
+ * @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock
+ * @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock
+ * @arg RCC_RTCCLKSOURCE_HSE_DIV32: HSE clock divided by 32
+ *
+ * @note If the LSE is used as RTC clock source, the RTC continues to
+ * work in STOP and STANDBY modes, and can be used as wakeup source.
+ * However, when the LSI clock and HSE clock divided by 32 is used as RTC clock source,
+ * the RTC cannot be used in STOP and STANDBY modes.
+ * @note The system must always be configured so as to get a PCLK frequency greater than or
+ * equal to the RTCCLK frequency for a proper operation of the RTC.
+ */
+#define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) \
+ MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, (uint32_t)(__RTCCLKSource__))
+
+/** @brief Macro to get the RTC clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_RTCCLKSOURCE_NONE: No clock selected as RTC clock
+ * @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock
+ * @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock
+ * @arg RCC_RTCCLKSOURCE_HSE_DIV32: HSE clock divided by 32 selected as RTC clock
+ */
+#define __HAL_RCC_GET_RTC_SOURCE() ((uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Force_Release_Backup RCC Force Release Backup
+ * @{
+ */
+
+/** @brief Macro to force or release the Backup domain reset.
+ * @note These macros reset the RTC peripheral (including the backup registers)
+ * and the RTC clock source selection in RCC_CSR register.
+ * @note The BKPSRAM is not affected by this reset.
+ */
+#define __HAL_RCC_BACKUPRESET_FORCE() SET_BIT(RCC->BDCR, RCC_BDCR_BDRST)
+#define __HAL_RCC_BACKUPRESET_RELEASE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Configuration RCC PLL Configuration
+ * @{
+ */
+
+/** @brief Macro to enable or disable the PLL.
+ * @note After enabling the PLL, the application software should wait on
+ * PLLRDY flag to be set indicating that PLL clock is stable and can
+ * be used as system clock source.
+ * @note The PLL can not be disabled if it is used as system clock source
+ * @note The PLL is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLL_ENABLE() SET_BIT(RCC->CR, RCC_CR_PLLON)
+#define __HAL_RCC_PLL_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_PLLON)
+
+/** @brief Macro to configure the PLL clock source, multiplication and division factors.
+ * @note This macro must be used only when the PLL is disabled.
+ *
+ * @param __RCC_PLLSource__: specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
+ * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+ * @param __PREDIV__: specifies the predivider factor for PLL VCO input clock
+ * This parameter must be a number between RCC_PREDIV_DIV1 and RCC_PREDIV_DIV16.
+ * @param __PLLMUL__: specifies the multiplication factor for PLL VCO input clock
+ * This parameter must be a number between RCC_PLL_MUL2 and RCC_PLL_MUL16.
+ *
+ */
+#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__ , __PREDIV__, __PLLMUL__) \
+ do { \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (__PREDIV__)); \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLMUL | RCC_CFGR_PLLSRC, (uint32_t)((__PLLMUL__)|(__RCC_PLLSource__))); \
+ } while(0)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Get_Clock_source RCC Get Clock source
+ * @{
+ */
+
+/** @brief Macro to get the clock source used as system clock.
+ * @retval The clock source used as system clock.
+ * The returned value can be one of the following value:
+ * @arg RCC_SYSCLKSOURCE_STATUS_HSI: HSI used as system clock
+ * @arg RCC_SYSCLKSOURCE_STATUS_HSE: HSE used as system clock
+ * @arg RCC_SYSCLKSOURCE_STATUS_PLLCLK: PLL used as system clock
+ */
+#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS)))
+
+/** @brief Macro to get the oscillator used as PLL clock source.
+ * @retval The oscillator used as PLL clock source. The returned value can be one
+ * of the following:
+ * - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source.
+ * - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source.
+ */
+#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLSRC)))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flags_Interrupts_Management RCC Flags Interrupts Management
+ * @brief macros to manage the specified RCC Flags and interrupts.
+ * @{
+ */
+
+/** @brief Enable RCC interrupt (Perform Byte access to RCC_CIR[12:8] bits to enable
+ * the selected interrupts.).
+ * @param __INTERRUPT__: specifies the RCC interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt enable
+ * @arg RCC_IT_LSERDY: LSE ready interrupt enable
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt enable
+ * @arg RCC_IT_HSERDY: HSE ready interrupt enable
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt enable
+ * @arg RCC_IT_HSI14RDY: HSI14 ready interrupt enable
+ * @arg RCC_IT_HSI48RDY: HSI48 ready interrupt enable (only applicable to STM32F0X2 USB devices)
+ */
+#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *)RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__))
+
+/** @brief Disable RCC interrupt (Perform Byte access to RCC_CIR[12:8] bits to disable
+ * the selected interrupts.).
+ * @param __INTERRUPT__: specifies the RCC interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt enable
+ * @arg RCC_IT_LSERDY: LSE ready interrupt enable
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt enable
+ * @arg RCC_IT_HSERDY: HSE ready interrupt enable
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt enable
+ * @arg RCC_IT_HSI14RDY: HSI14 ready interrupt enable
+ * @arg RCC_IT_HSI48RDY: HSI48 ready interrupt enable (only applicable to STM32F0X2 USB devices)
+ */
+#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *)RCC_CIR_BYTE1_ADDRESS &= ~(__INTERRUPT__))
+
+/** @brief Clear the RCC's interrupt pending bits ( Perform Byte access to RCC_CIR[23:16]
+ * bits to clear the selected interrupt pending bits.
+ * @param __IT__: specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt clear
+ * @arg RCC_IT_LSERDY: LSE ready interrupt clear
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt clear
+ * @arg RCC_IT_HSERDY: HSE ready interrupt clear
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt clear
+ * @arg RCC_IT_HSI14RDY: HSI14 ready interrupt clear
+ * @arg RCC_IT_HSI48RDY: HSI48 ready interrupt clear (only applicable to STM32F0X2 USB devices)
+ * @arg RCC_IT_CSS: Clock Security System interrupt clear
+ */
+#define __HAL_RCC_CLEAR_IT(__IT__) (*(__IO uint8_t *)RCC_CIR_BYTE2_ADDRESS = (__IT__))
+
+/** @brief Check the RCC's interrupt has occurred or not.
+ * @param __IT__: specifies the RCC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt flag
+ * @arg RCC_IT_LSERDY: LSE ready interrupt flag
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt flag
+ * @arg RCC_IT_HSERDY: HSE ready interrupt flag
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt flag
+ * @arg RCC_IT_HSI14RDY: HSI14 ready interrupt flag
+ * @arg RCC_IT_HSI48RDY: HSI48 ready interrupt flag (only applicable to STM32F0X2 USB devices)
+ * @arg RCC_IT_CSS: Clock Security System interrupt flag
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_RCC_GET_IT(__IT__) ((RCC->CIR & (__IT__)) == (__IT__))
+
+/** @brief Set RMVF bit to clear the reset flags: RCC_FLAG_OBLRST, RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST,
+ * RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST
+ */
+#define __HAL_RCC_CLEAR_RESET_FLAGS() SET_BIT(RCC->CSR, RCC_CSR_RMVF)
+
+/** @brief Check RCC flag is set or not.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready
+ * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready
+ * @arg RCC_FLAG_PLLRDY: PLL clock ready
+ * @arg RCC_FLAG_HSI14RDY: HSI14 oscillator clock ready
+ * @arg RCC_FLAG_HSI48RDY: HSI48 oscillator clock ready (only applicable to STM32F0X2 USB devices)
+ * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready
+ * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready
+ * @arg RCC_FLAG_OBLRST: Option Byte Load reset
+ * @arg RCC_FLAG_PINRST: Pin reset
+ * @arg RCC_FLAG_PORRST: POR/PDR reset
+ * @arg RCC_FLAG_SFTRST: Software reset
+ * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset
+ * @arg RCC_FLAG_WWDGRST: Window Watchdog reset
+ * @arg RCC_FLAG_LPWRRST: Low Power reset
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define RCC_FLAG_MASK ((uint8_t)0x1F)
+#define __HAL_RCC_GET_FLAG(__FLAG__) (((((__FLAG__) >> 5) == CR_REG_INDEX)? RCC->CR : \
+ (((__FLAG__) >> 5) == CR2_REG_INDEX)? RCC->CR2 : \
+ (((__FLAG__) >> 5) == BDCR_REG_INDEX) ? RCC->BDCR : \
+ RCC->CSR) & ((uint32_t)1 << ((__FLAG__) & RCC_FLAG_MASK)))
+
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Include RCC HAL Extension module */
+#include "stm32f0xx_hal_rcc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup RCC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RCC_Exported_Functions_Group1
+ * @{
+ */
+
+/* Initialization and de-initialization functions ***************************/
+void HAL_RCC_DeInit(void);
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency);
+
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_Exported_Functions_Group2
+ * @{
+ */
+
+/* Peripheral Control functions *********************************************/
+void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv);
+void HAL_RCC_EnableCSS(void);
+void HAL_RCC_DisableCSS(void);
+uint32_t HAL_RCC_GetSysClockFreq(void);
+uint32_t HAL_RCC_GetHCLKFreq(void);
+uint32_t HAL_RCC_GetPCLK1Freq(void);
+void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency);
+
+/* CSS NMI IRQ handler */
+void HAL_RCC_NMI_IRQHandler(void);
+
+/* User Callbacks in non blocking mode (IT mode) */
+void HAL_RCC_CCSCallback(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_RCC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_rcc_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1680 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_rcc_ex.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of RCC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_RCC_EX_H
+#define __STM32F0xx_HAL_RCC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RCCEx_Exported_Types RCCEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief RCC extended clocks structure definition
+ */
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || \
+ defined(STM32F030xC)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx ||
+ STM32F030xC */
+
+#if defined(STM32F070x6) || defined(STM32F070xB)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t UsbClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F070x6 || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+ uint32_t UsbClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F042x6 || STM32F048xx */
+
+#if defined(STM32F051x8) || defined(STM32F058xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F071xB)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCCEx_USART2_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F071xB */
+
+#if defined(STM32F072xB) || defined(STM32F078xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCCEx_USART2_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+ uint32_t UsbClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F072xB || STM32F078xx */
+
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCCEx_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCCEx_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/**
+ * @brief RCC_CRS Init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the division factor of the SYNC signal.
+ This parameter can be a value of @ref RCCEx_CRS_SynchroDivider */
+
+ uint32_t Source; /*!< Specifies the SYNC signal source.
+ This parameter can be a value of @ref RCCEx_CRS_SynchroSource */
+
+ uint32_t Polarity; /*!< Specifies the input polarity for the SYNC signal source.
+ This parameter can be a value of @ref RCCEx_CRS_SynchroPolarity */
+
+ uint32_t ReloadValue; /*!< Specifies the value to be loaded in the frequency error counter with each SYNC event.
+ It can be calculated in using macro __HAL_RCC_CRS_CALCULATE_RELOADVALUE(_FTARGET_, _FSYNC_)
+ This parameter must be a number between 0 and 0xFFFF or a value of @ref RCCEx_CRS_ReloadValueDefault .*/
+
+ uint32_t ErrorLimitValue; /*!< Specifies the value to be used to evaluate the captured frequency error value.
+ This parameter must be a number between 0 and 0xFF or a value of @ref RCCEx_CRS_ErrorLimitDefault */
+
+ uint32_t HSI48CalibrationValue; /*!< Specifies a user-programmable trimming value to the HSI48 oscillator.
+ This parameter must be a number between 0 and 0x3F or a value of @ref RCCEx_CRS_HSI48CalibrationDefault */
+
+}RCC_CRSInitTypeDef;
+
+/**
+ * @brief RCC_CRS Synchronization structure definition
+ */
+typedef struct
+{
+ uint32_t ReloadValue; /*!< Specifies the value loaded in the Counter reload value.
+ This parameter must be a number between 0 and 0xFFFF*/
+
+ uint32_t HSI48CalibrationValue; /*!< Specifies value loaded in HSI48 oscillator smooth trimming.
+ This parameter must be a number between 0 and 0x3F */
+
+ uint32_t FreqErrorCapture; /*!< Specifies the value loaded in the .FECAP, the frequency error counter
+ value latched in the time of the last SYNC event.
+ This parameter must be a number between 0 and 0xFFFF */
+
+ uint32_t FreqErrorDirection; /*!< Specifies the value loaded in the .FEDIR, the counting direction of the
+ frequency error counter latched in the time of the last SYNC event.
+ It shows whether the actual frequency is below or above the target.
+ This parameter must be a value of @ref RCCEx_CRS_FreqErrorDirection*/
+
+}RCC_CRSSynchroInfoTypeDef;
+
+#endif /* STM32F042x6 || STM32F048xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants
+ * @{
+ */
+
+/** @defgroup RCCEx_CRS_Status RCCEx CRS Status
+ * @{
+ */
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define RCC_CRS_NONE ((uint32_t)0x00000000)
+#define RCC_CRS_TIMEOUT ((uint32_t)0x00000001)
+#define RCC_CRS_SYNCOK ((uint32_t)0x00000002)
+#define RCC_CRS_SYNCWARM ((uint32_t)0x00000004)
+#define RCC_CRS_SYNCERR ((uint32_t)0x00000008)
+#define RCC_CRS_SYNCMISS ((uint32_t)0x00000010)
+#define RCC_CRS_TRIMOV ((uint32_t)0x00000020)
+
+#endif /* STM32F042x6 || STM32F048xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_Periph_Clock_Selection RCCEx Periph Clock Selection
+ * @{
+ */
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || \
+ defined(STM32F030xC)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \
+ RCC_PERIPHCLK_RTC))
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx ||
+ STM32F030xC */
+
+#if defined(STM32F070x6) || defined(STM32F070xB)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_USB ((uint32_t)0x00020000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \
+ RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_USB))
+#endif /* STM32F070x6 || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_CEC ((uint32_t)0x00000400)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_USB ((uint32_t)0x00020000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \
+ RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB))
+#endif /* STM32F042x6 || STM32F048xx */
+
+#if defined(STM32F051x8) || defined(STM32F058xx)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_CEC ((uint32_t)0x00000400)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \
+ RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_RTC))
+#endif /* STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F071xB)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_CEC ((uint32_t)0x00000400)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_CEC | \
+ RCC_PERIPHCLK_RTC))
+#endif /* STM32F071xB */
+
+#if defined(STM32F072xB) || defined(STM32F078xx)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_CEC ((uint32_t)0x00000400)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_USB ((uint32_t)0x00020000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_CEC | \
+ RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_USB))
+#endif /* STM32F072xB || STM32F078xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_CEC ((uint32_t)0x00000400)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00040000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_CEC | \
+ RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_USART3 ))
+#endif /* STM32F091xC || STM32F098xx */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_MCO_Clock_Source RCCEx MCO Clock Source
+ * @{
+ */
+
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || defined(STM32F070x6) || defined(STM32F070xB) || defined(STM32F030xC)
+
+#define RCC_MCOSOURCE_PLLCLK_NODIV (RCC_CFGR_MCO_PLL | RCC_CFGR_PLLNODIV)
+
+#define IS_RCC_MCOSOURCE(SOURCE) (((SOURCE) == RCC_MCOSOURCE_NONE) || \
+ ((SOURCE) == RCC_MCOSOURCE_LSI) || \
+ ((SOURCE) == RCC_MCOSOURCE_LSE) || \
+ ((SOURCE) == RCC_MCOSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_MCOSOURCE_HSI) || \
+ ((SOURCE) == RCC_MCOSOURCE_HSE) || \
+ ((SOURCE) == RCC_MCOSOURCE_PLLCLK_NODIV) || \
+ ((SOURCE) == RCC_MCOSOURCE_PLLCLK_DIV2) || \
+ ((SOURCE) == RCC_MCOSOURCE_HSI14))
+
+#endif /* STM32F030x6 || STM32F031x6 || STM32F038xx || STM32F070x6 || STM32F070xB || STM32F030xC */
+
+#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
+
+#define IS_RCC_MCOSOURCE(SOURCE) (((SOURCE) == RCC_MCOSOURCE_NONE) || \
+ ((SOURCE) == RCC_MCOSOURCE_LSI) || \
+ ((SOURCE) == RCC_MCOSOURCE_LSE) || \
+ ((SOURCE) == RCC_MCOSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_MCOSOURCE_HSI) || \
+ ((SOURCE) == RCC_MCOSOURCE_HSE) || \
+ ((SOURCE) == RCC_MCOSOURCE_PLLCLK_DIV2) || \
+ ((SOURCE) == RCC_MCOSOURCE_HSI14))
+
+#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define RCC_MCOSOURCE_HSI48 RCC_CFGR_MCO_HSI48
+#define RCC_MCOSOURCE_PLLCLK_NODIV (RCC_CFGR_MCO_PLL | RCC_CFGR_PLLNODIV)
+
+#define IS_RCC_MCOSOURCE(SOURCE) (((SOURCE) == RCC_MCOSOURCE_NONE) || \
+ ((SOURCE) == RCC_MCOSOURCE_LSI) || \
+ ((SOURCE) == RCC_MCOSOURCE_LSE) || \
+ ((SOURCE) == RCC_MCOSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_MCOSOURCE_HSI) || \
+ ((SOURCE) == RCC_MCOSOURCE_HSE) || \
+ ((SOURCE) == RCC_MCOSOURCE_PLLCLK_NODIV) || \
+ ((SOURCE) == RCC_MCOSOURCE_PLLCLK_DIV2) || \
+ ((SOURCE) == RCC_MCOSOURCE_HSI14) || \
+ ((SOURCE) == RCC_MCOSOURCE_HSI48))
+
+#define RCC_IT_HSI48 ((uint8_t)0x40)
+
+/* Flags in the CR2 register */
+#define RCC_CR2_HSI48RDY_BitNumber 16
+
+#define RCC_FLAG_HSI48RDY ((uint8_t)((CR2_REG_INDEX << 5) | RCC_CR2_HSI48RDY_BitNumber))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+/**
+ * @}
+ */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx)
+
+/** @defgroup RCCEx_USB_Clock_Source RCCEx USB Clock Source
+ * @{
+ */
+#define RCC_USBCLKSOURCE_HSI48 RCC_CFGR3_USBSW_HSI48
+#define RCC_USBCLKSOURCE_PLLCLK RCC_CFGR3_USBSW_PLLCLK
+
+#define IS_RCC_USBCLKSOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSOURCE_HSI48) || \
+ ((SOURCE) == RCC_USBCLKSOURCE_PLLCLK))
+/**
+ * @}
+ */
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx */
+
+#if defined(STM32F070x6) || defined(STM32F070xB)
+
+/** @defgroup RCCEx_USB_Clock_Source RCCEx USB Clock Source
+ * @{
+ */
+#define RCC_USBCLKSOURCE_PLLCLK RCC_CFGR3_USBSW_PLLCLK
+
+#define IS_RCC_USBCLKSOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSOURCE_PLLCLK))
+/**
+ * @}
+ */
+
+#endif /* STM32F070x6 || STM32F070xB */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @defgroup RCCEx_USART2_Clock_Source RCCEx USART2 Clock Source
+ * @{
+ */
+#define RCC_USART2CLKSOURCE_PCLK1 RCC_CFGR3_USART2SW_PCLK
+#define RCC_USART2CLKSOURCE_SYSCLK RCC_CFGR3_USART2SW_SYSCLK
+#define RCC_USART2CLKSOURCE_LSE RCC_CFGR3_USART2SW_LSE
+#define RCC_USART2CLKSOURCE_HSI RCC_CFGR3_USART2SW_HSI
+
+#define IS_RCC_USART2CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART2CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_USART2CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART2CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART2CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @defgroup RCCEx_USART3_Clock_Source RCCEx USART3 Clock Source
+ * @{
+ */
+#define RCC_USART3CLKSOURCE_PCLK1 RCC_CFGR3_USART3SW_PCLK
+#define RCC_USART3CLKSOURCE_SYSCLK RCC_CFGR3_USART3SW_SYSCLK
+#define RCC_USART3CLKSOURCE_LSE RCC_CFGR3_USART3SW_LSE
+#define RCC_USART3CLKSOURCE_HSI RCC_CFGR3_USART3SW_HSI
+
+#define IS_RCC_USART3CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART3CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_USART3CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART3CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART3CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+#endif /* STM32F091xC || STM32F098xx */
+
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @defgroup RCCEx_CEC_Clock_Source RCCEx CEC Clock Source
+ * @{
+ */
+#define RCC_CECCLKSOURCE_HSI RCC_CFGR3_CECSW_HSI_DIV244
+#define RCC_CECCLKSOURCE_LSE RCC_CFGR3_CECSW_LSE
+
+#define IS_RCC_CECCLKSOURCE(SOURCE) (((SOURCE) == RCC_CECCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_CECCLKSOURCE_LSE))
+/**
+ * @}
+ */
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @defgroup RCCEx_PLL_Clock_Source RCCEx PLL Clock Source
+ * @{
+ */
+#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_PREDIV
+#define RCC_PLLSOURCE_HSI48 RCC_CFGR_PLLSRC_HSI48_PREDIV
+
+#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \
+ ((SOURCE) == RCC_PLLSOURCE_HSI48) || \
+ ((SOURCE) == RCC_PLLSOURCE_HSE))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_System_Clock_Source RCCEx System Clock Source
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_HSI48 RCC_CFGR_SW_HSI48
+
+#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_HSI48))
+
+#define RCC_SYSCLKSOURCE_STATUS_HSI48 RCC_CFGR_SWS_HSI48
+
+#define IS_RCC_SYSCLKSOURCE_STATUS(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_PLLCLK) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSI48))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_HSI48_Config RCCEx HSI48 Config
+ * @{
+ */
+#define RCC_HSI48_OFF ((uint8_t)0x00)
+#define RCC_HSI48_ON ((uint8_t)0x01)
+
+#define IS_RCC_HSI48(HSI48) (((HSI48) == RCC_HSI48_OFF) || ((HSI48) == RCC_HSI48_ON))
+/**
+ * @}
+ */
+#else
+/** @defgroup RCCEx_PLL_Clock_Source RCCEx PLL Clock Source
+ * @{
+ */
+
+#if defined(STM32F070xB) || defined(STM32F070x6) || defined(STM32F030xC)
+#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_PREDIV
+#else
+#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_DIV2
+#endif
+
+#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \
+ ((SOURCE) == RCC_PLLSOURCE_HSE))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_System_Clock_Source RCCEx System Clock Source
+ * @{
+ */
+#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK))
+
+#define IS_RCC_SYSCLKSOURCE_STATUS(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_HSI48_Config RCCEx HSI48 Config
+ * @{
+ */
+#define RCC_HSI48_OFF ((uint8_t)0x00)
+
+#define IS_RCC_HSI48(HSI48) (((HSI48) == RCC_HSI48_OFF))
+/**
+ * @}
+ */
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+
+/** @defgroup RCCEx_MCOx_Clock_Prescaler RCCEx MCOx Clock Prescaler
+ * @{
+ */
+
+#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
+
+#define RCC_MCO_NODIV ((uint32_t)0x00000000)
+
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCO_NODIV))
+
+#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
+
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || defined(STM32F070x6) || \
+ defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F071xB) || defined(STM32F070xB) || \
+ defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define RCC_MCO_DIV1 ((uint32_t)0x00000000)
+#define RCC_MCO_DIV2 ((uint32_t)0x10000000)
+#define RCC_MCO_DIV4 ((uint32_t)0x20000000)
+#define RCC_MCO_DIV8 ((uint32_t)0x30000000)
+#define RCC_MCO_DIV16 ((uint32_t)0x40000000)
+#define RCC_MCO_DIV32 ((uint32_t)0x50000000)
+#define RCC_MCO_DIV64 ((uint32_t)0x60000000)
+#define RCC_MCO_DIV128 ((uint32_t)0x70000000)
+
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCO_DIV1) || ((DIV) == RCC_MCO_DIV2) || \
+ ((DIV) == RCC_MCO_DIV4) || ((DIV) == RCC_MCO_DIV8) || \
+ ((DIV) == RCC_MCO_DIV16) || ((DIV) == RCC_MCO_DIV32) || \
+ ((DIV) == RCC_MCO_DIV64) || ((DIV) == RCC_MCO_DIV128))
+
+#endif /* STM32F030x6 || STM32F031x6 || STM32F038xx || STM32F042x6 || STM32F048xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070x6 || STM32F070xB */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+/**
+ * @}
+ */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @defgroup RCCEx_CRS_SynchroSource RCCEx CRS SynchroSource
+ * @{
+ */
+#define RCC_CRS_SYNC_SOURCE_GPIO ((uint32_t)0x00) /*!< Synchro Signal soucre GPIO */
+#define RCC_CRS_SYNC_SOURCE_LSE CRS_CFGR_SYNCSRC_0 /*!< Synchro Signal source LSE */
+#define RCC_CRS_SYNC_SOURCE_USB CRS_CFGR_SYNCSRC_1 /*!< Synchro Signal source USB SOF (default)*/
+
+#define IS_RCC_CRS_SYNC_SOURCE(_SOURCE_) (((_SOURCE_) == RCC_CRS_SYNC_SOURCE_GPIO) || \
+ ((_SOURCE_) == RCC_CRS_SYNC_SOURCE_LSE) || \
+ ((_SOURCE_) == RCC_CRS_SYNC_SOURCE_USB))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_SynchroDivider RCCEx CRS SynchroDivider
+ * @{
+ */
+#define RCC_CRS_SYNC_DIV1 ((uint32_t)0x00) /*!< Synchro Signal not divided (default) */
+#define RCC_CRS_SYNC_DIV2 CRS_CFGR_SYNCDIV_0 /*!< Synchro Signal divided by 2 */
+#define RCC_CRS_SYNC_DIV4 CRS_CFGR_SYNCDIV_1 /*!< Synchro Signal divided by 4 */
+#define RCC_CRS_SYNC_DIV8 (CRS_CFGR_SYNCDIV_1 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 8 */
+#define RCC_CRS_SYNC_DIV16 CRS_CFGR_SYNCDIV_2 /*!< Synchro Signal divided by 16 */
+#define RCC_CRS_SYNC_DIV32 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_0) /*!< Synchro Signal divided by 32 */
+#define RCC_CRS_SYNC_DIV64 (CRS_CFGR_SYNCDIV_2 | CRS_CFGR_SYNCDIV_1) /*!< Synchro Signal divided by 64 */
+#define RCC_CRS_SYNC_DIV128 CRS_CFGR_SYNCDIV /*!< Synchro Signal divided by 128 */
+
+#define IS_RCC_CRS_SYNC_DIV(_DIV_) (((_DIV_) == RCC_CRS_SYNC_DIV1) || ((_DIV_) == RCC_CRS_SYNC_DIV2) || \
+ ((_DIV_) == RCC_CRS_SYNC_DIV4) || ((_DIV_) == RCC_CRS_SYNC_DIV8) || \
+ ((_DIV_) == RCC_CRS_SYNC_DIV16) || ((_DIV_) == RCC_CRS_SYNC_DIV32) || \
+ ((_DIV_) == RCC_CRS_SYNC_DIV64) || ((_DIV_) == RCC_CRS_SYNC_DIV128))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_SynchroPolarity RCCEx CRS SynchroPolarity
+ * @{
+ */
+#define RCC_CRS_SYNC_POLARITY_RISING ((uint32_t)0x00) /*!< Synchro Active on rising edge (default) */
+#define RCC_CRS_SYNC_POLARITY_FALLING CRS_CFGR_SYNCPOL /*!< Synchro Active on falling edge */
+
+#define IS_RCC_CRS_SYNC_POLARITY(_POLARITY_) (((_POLARITY_) == RCC_CRS_SYNC_POLARITY_RISING) || \
+ ((_POLARITY_) == RCC_CRS_SYNC_POLARITY_FALLING))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_ReloadValueDefault RCCEx CRS ReloadValueDefault
+ * @{
+ */
+#define RCC_CRS_RELOADVALUE_DEFAULT ((uint32_t)0xBB7F) /*!< The reset value of the RELOAD field corresponds
+ to a target frequency of 48 MHz and a synchronization signal frequency of 1 kHz (SOF signal from USB). */
+
+#define IS_RCC_CRS_RELOADVALUE(_VALUE_) (((_VALUE_) <= 0xFFFF))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_ErrorLimitDefault RCCEx CRS ErrorLimitDefault
+ * @{
+ */
+#define RCC_CRS_ERRORLIMIT_DEFAULT ((uint32_t)0x22) /*!< Default Frequency error limit */
+
+#define IS_RCC_CRS_ERRORLIMIT(_VALUE_) (((_VALUE_) <= 0xFF))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_HSI48CalibrationDefault RCCEx CRS HSI48CalibrationDefault
+ * @{
+ */
+#define RCC_CRS_HSI48CALIBRATION_DEFAULT ((uint32_t)0x20) /*!< The default value is 32, which corresponds to the middle of the trimming interval.
+ The trimming step is around 67 kHz between two consecutive TRIM steps. A higher TRIM value
+ corresponds to a higher output frequency */
+
+#define IS_RCC_CRS_HSI48CALIBRATION(_VALUE_) (((_VALUE_) <= 0x3F))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_FreqErrorDirection RCCEx CRS FreqErrorDirection
+ * @{
+ */
+#define RCC_CRS_FREQERRORDIR_UP ((uint32_t)0x00) /*!< Upcounting direction, the actual frequency is above the target */
+#define RCC_CRS_FREQERRORDIR_DOWN ((uint32_t)CRS_ISR_FEDIR) /*!< Downcounting direction, the actual frequency is below the target */
+
+#define IS_RCC_CRS_FREQERRORDIR(_DIR_) (((_DIR_) == RCC_CRS_FREQERRORDIR_UP) || \
+ ((_DIR_) == RCC_CRS_FREQERRORDIR_DOWN))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_Interrupt_Sources RCCEx CRS Interrupt Sources
+ * @{
+ */
+#define RCC_CRS_IT_SYNCOK CRS_ISR_SYNCOKF /*!< SYNC event OK */
+#define RCC_CRS_IT_SYNCWARN CRS_ISR_SYNCWARNF /*!< SYNC warning */
+#define RCC_CRS_IT_ERR CRS_ISR_ERRF /*!< error */
+#define RCC_CRS_IT_ESYNC CRS_ISR_ESYNCF /*!< Expected SYNC */
+#define RCC_CRS_IT_TRIMOVF CRS_ISR_TRIMOVF /*!< Trimming overflow or underflow */
+#define RCC_CRS_IT_SYNCERR CRS_ISR_SYNCERR /*!< SYNC error */
+#define RCC_CRS_IT_SYNCMISS CRS_ISR_SYNCMISS /*!< SYNC missed*/
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_Flags RCCEx CRS Flags
+ * @{
+ */
+#define RCC_CRS_FLAG_SYNCOK CRS_ISR_SYNCOKF /* SYNC event OK flag */
+#define RCC_CRS_FLAG_SYNCWARN CRS_ISR_SYNCWARNF /* SYNC warning flag */
+#define RCC_CRS_FLAG_ERR CRS_ISR_ERRF /* Error flag */
+#define RCC_CRS_FLAG_ESYNC CRS_ISR_ESYNCF /* Expected SYNC flag */
+#define RCC_CRS_FLAG_TRIMOVF CRS_ISR_TRIMOVF /*!< Trimming overflow or underflow */
+#define RCC_CRS_FLAG_SYNCERR CRS_ISR_SYNCERR /*!< SYNC error */
+#define RCC_CRS_FLAG_SYNCMISS CRS_ISR_SYNCMISS /*!< SYNC missed*/
+
+/**
+ * @}
+ */
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+/**
+ * @}
+ */
+
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros
+ * @{
+ */
+
+/** @defgroup RCCEx_Peripheral_Clock_Enable_Disable RCCEx_Peripheral_Clock_Enable_Disable
+ * @brief Enables or disables the AHB1 peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#if defined(STM32F030x6) || defined(STM32F030x8) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || defined(STM32F070xB) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __GPIOD_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIODEN))
+
+#define __GPIOD_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIODEN))
+
+#endif /* STM32F030x6 || STM32F030x8 || */
+ /* STM32F051x8 || STM32F058xx || STM32F070xB || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __GPIOE_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOEEN))
+
+#define __GPIOE_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOEEN))
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __TSC_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_TSCEN))
+
+#define __TSC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_TSCEN))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __DMA2_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_DMA2EN))
+
+#define __DMA2_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA2EN))
+
+#endif /* STM32F091xC || STM32F098xx */
+
+/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#if defined(STM32F030x8) || \
+ defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __USART2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART2EN))
+#define __SPI2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI2EN))
+
+#define __USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN))
+#define __SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F031x6) || defined(STM32F038xx) || \
+ defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __TIM2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM2EN))
+
+#define __TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+
+#endif /* STM32F031x6 || STM32F038xx || */
+ /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F030x8) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __TIM6_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM6EN))
+#define __I2C2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C2EN))
+
+#define __TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+
+#endif /* STM32F030x8 || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __DAC1_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_DACEN))
+
+#define __DAC1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN))
+
+#endif /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __CEC_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CECEN))
+
+#define __CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __TIM7_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM7EN))
+#define __USART3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART3EN))
+#define __USART4_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART4EN))
+
+#define __TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#define __USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __USART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART4EN))
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
+ defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
+
+#define __USB_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USBEN))
+
+#define __USB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USBEN))
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F072xB || STM32F078xx || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __CAN_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CANEN))
+#define __CAN_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CANEN))
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __CRS_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CRSEN))
+
+#define __CRS_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CRSEN))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __USART5_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART5EN))
+
+#define __USART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART5EN))
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ */
+#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __TIM15_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM15EN))
+
+#define __TIM15_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM15EN))
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __USART6_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART6EN))
+
+#define __USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN))
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __USART7_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART7EN))
+#define __USART8_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART8EN))
+
+#define __USART7_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART7EN))
+#define __USART8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART8EN))
+
+#endif /* STM32F091xC || STM32F098xx */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup RCCEx_Force_Release_Peripheral_Reset RCCEx Force Release Peripheral Reset
+ * @brief Forces or releases peripheral reset.
+ * @{
+ */
+
+/** @brief Force or release AHB peripheral reset.
+ */
+#if defined(STM32F030x6) || defined(STM32F030x8) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __GPIOD_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIODRST))
+
+#define __GPIOD_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIODRST))
+
+#endif /* STM32F030x6 || STM32F030x8 || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __GPIOE_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOERST))
+
+#define __GPIOE_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOERST))
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __TSC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_TSCRST))
+
+#define __TSC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_TSCRST))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+/** @brief Force or release APB1 peripheral reset.
+ */
+#if defined(STM32F030x8) || \
+ defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST))
+#define __SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+
+#define __USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST))
+#define __SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F031x6) || defined(STM32F038xx) || \
+ defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+
+#define __TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+
+#endif /* STM32F031x6 || STM32F038xx || */
+ /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F030x8) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) ||\
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+
+#define __TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+
+#endif /* STM32F030x8 || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __DAC1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST))
+
+#define __DAC1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST))
+
+#endif /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST))
+
+#define __CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+#define __USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __USART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART4RST))
+
+#define __TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#define __USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __USART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART4RST))
+
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
+ defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
+
+#define __USB_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USBRST))
+
+#define __USB_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USBRST))
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F072xB || STM32F078xx || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __CAN_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CANRST))
+
+#define __CAN_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CANRST))
+
+#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __CRS_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CRSRST))
+
+#define __CRS_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CRSRST))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __USART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART5RST))
+
+#define __USART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART5RST))
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+
+/** @brief Force or release APB2 peripheral reset.
+ */
+#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __TIM15_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM15RST))
+
+#define __TIM15_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM15RST))
+
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST))
+
+#define __USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST))
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __USART7_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART7RST))
+#define __USART8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART8RST))
+
+#define __USART7_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART7RST))
+#define __USART8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART8RST))
+
+#endif /* STM32F091xC || STM32F098xx */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_HSI48_Enable_Disable RCCEx HSI48 Enable Disable
+ * @brief Macros to enable or disable the Internal 48Mhz High Speed oscillator (HSI48).
+ * @note The HSI48 is stopped by hardware when entering STOP and STANDBY modes.
+ * @note HSI48 can not be stopped if it is used as system clock source. In this case,
+ * you have to select another source of the system clock then stop the HSI14.
+ * @note After enabling the HSI48 with __HAL_RCC_HSI48_ENABLE(), the application software
+ * should wait on HSI48RDY flag to be set indicating that HSI48 clock is stable and can be
+ * used as system clock source. This is not necessary if HAL_RCC_OscConfig() is used.
+ * @note When the HSI48 is stopped, HSI48RDY flag goes low after 6 HSI48 oscillator
+ * clock cycles.
+ * @{
+ */
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define __HAL_RCC_HSI48_ENABLE() SET_BIT(RCC->CR2, RCC_CR2_HSI48ON)
+#define __HAL_RCC_HSI48_DISABLE() CLEAR_BIT(RCC->CR2, RCC_CR2_HSI48ON)
+
+/** @brief Macro to get the Internal 48Mhz High Speed oscillator (HSI48) state.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_HSI48_ON: HSI48 enabled
+ * @arg RCC_HSI48_OFF: HSI48 disabled
+ */
+#define __HAL_RCC_GET_HSI48_STATE() \
+ (((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CR2_HSI48ON)) != RESET) ? RCC_HSI48_ON : RCC_HSI48_OFF)
+
+#else
+
+/** @brief Macro to get the Internal 48Mhz High Speed oscillator (HSI48) state.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_HSI_OFF: HSI48 disabled
+ */
+#define __HAL_RCC_GET_HSI48_STATE() RCC_HSI_OFF
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_Peripheral_Clock_Source_Config RCCEx Peripheral Clock Source Config
+ * @{
+ */
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F070x6) || defined(STM32F070xB)
+
+/** @brief Macro to configure the USB clock (USBCLK).
+ * @param __USBCLKSource__: specifies the USB clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USBCLKSOURCE_HSI48: HSI48 selected as USB clock (not available for STM32F070x6 & STM32F070xB)
+ * @arg RCC_USBCLKSOURCE_PLLCLK: PLL Clock selected as USB clock
+ */
+#define __HAL_RCC_USB_CONFIG(__USBCLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USBSW, (uint32_t)(__USBCLKSource__))
+
+/** @brief Macro to get the USB clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USBCLKSOURCE_HSI48: HSI48 selected as USB clock (not available for STM32F070x6 & STM32F070xB)
+ * @arg RCC_USBCLKSOURCE_PLLCLK: PLL Clock selected as USB clock
+ */
+#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USBSW)))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F072xB || STM32F078xx || */
+ /* STM32F070x6 || STM32F070xB */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @brief Macro to configure the CEC clock.
+ * @param __CECCLKSource__: specifies the CEC clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_CECCLKSOURCE_HSI: HSI selected as CEC clock
+ * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
+ */
+#define __HAL_RCC_CEC_CONFIG(__CECCLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_CECSW, (uint32_t)(__CECCLKSource__))
+
+/** @brief Macro to get the HDMI CEC clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_CECCLKSOURCE_HSI: HSI selected as CEC clock
+ * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
+ */
+#define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_CECSW)))
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F051x8 || STM32F058xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || defined(STM32F098xx) */
+
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || \
+ defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+/** @brief Macro to configure the MCO clock.
+ * @param __MCOCLKSource__: specifies the MCO clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCOSOURCE_HSI: HSI selected as MCO clock
+ * @arg RCC_MCOSOURCE_HSE: HSE selected as MCO clock
+ * @arg RCC_MCOSOURCE_LSI: LSI selected as MCO clock
+ * @arg RCC_MCOSOURCE_LSE: LSE selected as MCO clock
+ * @arg RCC_MCOSOURCE_PLLCLK_NODIV: PLLCLK selected as MCO clock
+ * @arg RCC_MCOSOURCE_PLLCLK_DIV2: PLLCLK Divided by 2 selected as MCO clock
+ * @arg RCC_MCOSOURCE_SYSCLK: System Clock selected as MCO clock
+ * @arg RCC_MCOSOURCE_HSI14: HSI14 selected as MCO clock
+ * @arg RCC_MCOSOURCE_HSI48: HSI48 selected as MCO clock
+ * @param __MCODiv__: specifies the MCO clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO_DIV1: MCO clock source is divided by 1
+ * @arg RCC_MCO_DIV2: MCO clock source is divided by 2
+ * @arg RCC_MCO_DIV4: MCO clock source is divided by 4
+ * @arg RCC_MCO_DIV8: MCO clock source is divided by 8
+ * @arg RCC_MCO_DIV16: MCO clock source is divided by 16
+ * @arg RCC_MCO_DIV32: MCO clock source is divided by 32
+ * @arg RCC_MCO_DIV64: MCO clock source is divided by 64
+ * @arg RCC_MCO_DIV128: MCO clock source is divided by 128
+ */
+#define __HAL_RCC_MCO_CONFIG(__MCOCLKSource__, __MCODiv__) \
+ MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO | RCC_CFGR_MCOPRE), ((__MCOCLKSource__) | (__MCODiv__)))
+#else
+
+/** @brief Macro to configure the MCO clock.
+ * @param __MCOCLKSource__: specifies the MCO clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCOSOURCE_HSI: HSI selected as MCO clock
+ * @arg RCC_MCOSOURCE_HSE: HSE selected as MCO clock
+ * @arg RCC_MCOSOURCE_LSI: LSI selected as MCO clock
+ * @arg RCC_MCOSOURCE_LSE: LSE selected as MCO clock
+ * @arg RCC_MCOSOURCE_PLLCLK_DIV2: PLLCLK Divided by 2 selected as MCO clock
+ * @arg RCC_MCOSOURCE_SYSCLK: System Clock selected as MCO clock
+ * @arg RCC_MCOSOURCE_HSI14: HSI14 selected as MCO clock
+ * @arg RCC_MCOSOURCE_HSI48: HSI48 selected as MCO clock
+ * @param __MCODiv__: specifies the MCO clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO_NODIV: No division applied on MCO clock source
+ */
+#define __HAL_RCC_MCO_CONFIG(__MCOCLKSource__, __MCODiv__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_MCO, __MCOCLKSource__)
+
+#endif /* STM32F030x6 || STM32F031x6 || STM32F038xx || STM32F070x6 || */
+ /* STM32F042x6 || STM32F048xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+/** @brief Macro to configure the USART2 clock (USART2CLK).
+ * @param __USART2CLKSource__: specifies the USART2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
+ */
+#define __HAL_RCC_USART2_CONFIG(__USART2CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART2SW, (uint32_t)(__USART2CLKSource__))
+
+/** @brief Macro to get the USART2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
+ */
+#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART2SW)))
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx*/
+
+#if defined(STM32F091xC) || defined(STM32F098xx)
+/** @brief Macro to configure the USART3 clock (USART3CLK).
+ * @param __USART3CLKSource__: specifies the USART3 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USART3CLKSOURCE_PCLK1: PCLK1 selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_HSI: HSI selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_SYSCLK: System Clock selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_LSE: LSE selected as USART3 clock
+ */
+#define __HAL_RCC_USART3_CONFIG(__USART3CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART3SW, (uint32_t)(__USART3CLKSource__))
+
+/** @brief Macro to get the USART3 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USART3CLKSOURCE_PCLK1: PCLK1 selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_HSI: HSI selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_SYSCLK: System Clock selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_LSE: LSE selected as USART3 clock
+ */
+#define __HAL_RCC_GET_USART3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART3SW)))
+
+#endif /* STM32F091xC || STM32F098xx */
+/**
+ * @}
+ */
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+/** @defgroup RCCEx_IT_And_Flag RCCEx IT and Flag
+ * @{
+ */
+/* Interrupt & Flag management */
+
+/**
+ * @brief Enables the specified CRS interrupts.
+ * @param __INTERRUPT__: specifies the CRS interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_CRS_IT_SYNCOK
+ * @arg RCC_CRS_IT_SYNCWARN
+ * @arg RCC_CRS_IT_ERR
+ * @arg RCC_CRS_IT_ESYNC
+ * @retval None
+ */
+#define __HAL_RCC_CRS_ENABLE_IT(__INTERRUPT__) (CRS->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified CRS interrupts.
+ * @param __INTERRUPT__: specifies the CRS interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_CRS_IT_SYNCOK
+ * @arg RCC_CRS_IT_SYNCWARN
+ * @arg RCC_CRS_IT_ERR
+ * @arg RCC_CRS_IT_ESYNC
+ * @retval None
+ */
+#define __HAL_RCC_CRS_DISABLE_IT(__INTERRUPT__) (CRS->CR &= ~(__INTERRUPT__))
+
+/** @brief Check the CRS's interrupt has occurred or not.
+ * @param __INTERRUPT__: specifies the CRS interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_CRS_IT_SYNCOK
+ * @arg RCC_CRS_IT_SYNCWARN
+ * @arg RCC_CRS_IT_ERR
+ * @arg RCC_CRS_IT_ESYNC
+ * @retval The new state of __INTERRUPT__ (SET or RESET).
+ */
+#define __HAL_RCC_CRS_GET_IT_SOURCE(__INTERRUPT__) ((CRS->CR & (__INTERRUPT__))? SET : RESET)
+
+/** @brief Clear the CRS's interrupt pending bits
+ * bits to clear the selected interrupt pending bits.
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_CRS_IT_SYNCOK
+ * @arg RCC_CRS_IT_SYNCWARN
+ * @arg RCC_CRS_IT_ERR
+ * @arg RCC_CRS_IT_ESYNC
+ * @arg RCC_CRS_IT_TRIMOVF
+ * @arg RCC_CRS_IT_SYNCERR
+ * @arg RCC_CRS_IT_SYNCMISS
+ */
+/* CRS IT Error Mask */
+#define RCC_CRS_IT_ERROR_MASK ((uint32_t)(RCC_CRS_IT_TRIMOVF | RCC_CRS_IT_SYNCERR | RCC_CRS_IT_SYNCMISS))
+
+#define __HAL_RCC_CRS_CLEAR_IT(__INTERRUPT__) ((((__INTERRUPT__) & RCC_CRS_IT_ERROR_MASK)!= 0) ? (CRS->ICR |= CRS_ICR_ERRC) : \
+ (CRS->ICR |= (__INTERRUPT__)))
+
+/**
+ * @brief Checks whether the specified CRS flag is set or not.
+ * @param _FLAG_: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_CRS_FLAG_SYNCOK
+ * @arg RCC_CRS_FLAG_SYNCWARN
+ * @arg RCC_CRS_FLAG_ERR
+ * @arg RCC_CRS_FLAG_ESYNC
+ * @arg RCC_CRS_FLAG_TRIMOVF
+ * @arg RCC_CRS_FLAG_SYNCERR
+ * @arg RCC_CRS_FLAG_SYNCMISS
+ * @retval The new state of _FLAG_ (TRUE or FALSE).
+ */
+#define __HAL_RCC_CRS_GET_FLAG(_FLAG_) ((CRS->ISR & (_FLAG_)) == (_FLAG_))
+
+/**
+ * @brief Clears the CRS specified FLAG.
+ * @param _FLAG_: specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg RCC_CRS_FLAG_SYNCOK
+ * @arg RCC_CRS_FLAG_SYNCWARN
+ * @arg RCC_CRS_FLAG_ERR
+ * @arg RCC_CRS_FLAG_ESYNC
+ * @arg RCC_CRS_FLAG_TRIMOVF
+ * @arg RCC_CRS_FLAG_SYNCERR
+ * @arg RCC_CRS_FLAG_SYNCMISS
+ * @retval None
+ */
+
+/* CRS Flag Error Mask */
+#define RCC_CRS_FLAG_ERROR_MASK ((uint32_t)(RCC_CRS_FLAG_TRIMOVF | RCC_CRS_FLAG_SYNCERR | RCC_CRS_FLAG_SYNCMISS))
+
+#define __HAL_RCC_CRS_CLEAR_FLAG(__FLAG__) ((((__FLAG__) & RCC_CRS_FLAG_ERROR_MASK)!= 0) ? (CRS->ICR |= CRS_ICR_ERRC) : \
+ (CRS->ICR |= (__FLAG__)))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CRS_Extended_Features RCCEx CRS Extended Features
+ * @{
+ */
+/**
+ * @brief Enables the oscillator clock for frequency error counter.
+ * @note when the CEN bit is set the CRS_CFGR register becomes write-protected.
+ * @retval None
+ */
+#define __HAL_RCC_CRS_ENABLE_FREQ_ERROR_COUNTER() (CRS->CR |= CRS_CR_CEN)
+
+/**
+ * @brief Disables the oscillator clock for frequency error counter.
+ * @retval None
+ */
+#define __HAL_RCC_CRS_DISABLE_FREQ_ERROR_COUNTER() (CRS->CR &= ~CRS_CR_CEN)
+
+/**
+ * @brief Enables the automatic hardware adjustement of TRIM bits.
+ * @note When the AUTOTRIMEN bit is set the CRS_CFGR register becomes write-protected.
+ * @retval None
+ */
+#define __HAL_RCC_CRS_ENABLE_AUTOMATIC_CALIB() (CRS->CR |= CRS_CR_AUTOTRIMEN)
+
+/**
+ * @brief Enables or disables the automatic hardware adjustement of TRIM bits.
+ * @retval None
+ */
+#define __HAL_RCC_CRS_DISABLE_AUTOMATIC_CALIB() (CRS->CR &= ~CRS_CR_AUTOTRIMEN)
+
+/**
+ * @brief Macro to calculate reload value to be set in CRS register according to target and sync frequencies
+ * @note The RELOAD value should be selected according to the ratio between the target frequency and the frequency
+ * of the synchronization source after prescaling. It is then decreased by one in order to
+ * reach the expected synchronization on the zero value. The formula is the following:
+ * RELOAD = (fTARGET / fSYNC) -1
+ * @param _FTARGET_ Target frequency (value in Hz)
+ * @param _FSYNC_ Synchronization signal frequency (value in Hz)
+ * @retval None
+ */
+#define __HAL_RCC_CRS_CALCULATE_RELOADVALUE(_FTARGET_, _FSYNC_) (((_FTARGET_) / (_FSYNC_)) - 1)
+
+/**
+ * @}
+ */
+
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RCCEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RCCEx_Exported_Functions_Group1
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit);
+void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void);
+void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo);
+uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout);
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_RCC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_rtc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,785 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_rtc.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of RTC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_RTC_H
+#define __STM32F0xx_HAL_RTC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RTC RTC HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup RTC_Exported_Types RTC Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_RTC_STATE_RESET = 0x00, /*!< RTC not yet initialized or disabled */
+ HAL_RTC_STATE_READY = 0x01, /*!< RTC initialized and ready for use */
+ HAL_RTC_STATE_BUSY = 0x02, /*!< RTC process is ongoing */
+ HAL_RTC_STATE_TIMEOUT = 0x03, /*!< RTC timeout state */
+ HAL_RTC_STATE_ERROR = 0x04 /*!< RTC error state */
+
+}HAL_RTCStateTypeDef;
+
+/**
+ * @brief RTC Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t HourFormat; /*!< Specifies the RTC Hour Format.
+ This parameter can be a value of @ref RTC_Hour_Formats */
+
+ uint32_t AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */
+
+ uint32_t SynchPrediv; /*!< Specifies the RTC Synchronous Predivider value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF */
+
+ uint32_t OutPut; /*!< Specifies which signal will be routed to the RTC output.
+ This parameter can be a value of @ref RTCEx_Output_selection_Definitions */
+
+ uint32_t OutPutPolarity; /*!< Specifies the polarity of the output signal.
+ This parameter can be a value of @ref RTC_Output_Polarity_Definitions */
+
+ uint32_t OutPutType; /*!< Specifies the RTC Output Pin mode.
+ This parameter can be a value of @ref RTC_Output_Type_ALARM_OUT */
+}RTC_InitTypeDef;
+
+/**
+ * @brief RTC Time structure definition
+ */
+typedef struct
+{
+ uint8_t Hours; /*!< Specifies the RTC Time Hour.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the RTC_HourFormat_12 is selected.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the RTC_HourFormat_24 is selected */
+
+ uint8_t Minutes; /*!< Specifies the RTC Time Minutes.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+ uint8_t Seconds; /*!< Specifies the RTC Time Seconds.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+ uint32_t SubSeconds; /*!< Specifies the RTC Time SubSeconds.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+ uint8_t TimeFormat; /*!< Specifies the RTC AM/PM Time.
+ This parameter can be a value of @ref RTC_AM_PM_Definitions */
+
+ uint32_t DayLightSaving; /*!< Specifies RTC_DayLightSaveOperation: the value of hour adjustment.
+ This parameter can be a value of @ref RTC_DayLightSaving_Definitions */
+
+ uint32_t StoreOperation; /*!< Specifies RTC_StoreOperation value to be written in the BCK bit
+ in CR register to store the operation.
+ This parameter can be a value of @ref RTC_StoreOperation_Definitions */
+}RTC_TimeTypeDef;
+
+/**
+ * @brief RTC Date structure definition
+ */
+typedef struct
+{
+ uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay.
+ This parameter can be a value of @ref RTC_WeekDay_Definitions */
+
+ uint8_t Month; /*!< Specifies the RTC Date Month (in BCD format).
+ This parameter can be a value of @ref RTC_Month_Date_Definitions */
+
+ uint8_t Date; /*!< Specifies the RTC Date.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 31 */
+
+ uint8_t Year; /*!< Specifies the RTC Date Year.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 99 */
+
+}RTC_DateTypeDef;
+
+/**
+ * @brief RTC Alarm structure definition
+ */
+typedef struct
+{
+ RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members */
+
+ uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks.
+ This parameter can be a value of @ref RTC_AlarmMask_Definitions */
+
+ uint32_t AlarmSubSecondMask; /*!< Specifies the RTC Alarm SubSeconds Masks.
+ This parameter can be a value of @ref RTC_Alarm_Sub_Seconds_Masks_Definitions */
+
+ uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on Date or WeekDay.
+ This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */
+
+ uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Date/WeekDay.
+ If the Alarm Date is selected, this parameter must be set to a value in the 1-31 range.
+ If the Alarm WeekDay is selected, this parameter can be a value of @ref RTC_WeekDay_Definitions */
+
+ uint32_t Alarm; /*!< Specifies the alarm .
+ This parameter can be a value of @ref RTC_Alarms_Definitions */
+}RTC_AlarmTypeDef;
+
+/**
+ * @brief Time Handle Structure definition
+ */
+typedef struct
+{
+ RTC_TypeDef *Instance; /*!< Register base address */
+
+ RTC_InitTypeDef Init; /*!< RTC required parameters */
+
+ HAL_LockTypeDef Lock; /*!< RTC locking object */
+
+ __IO HAL_RTCStateTypeDef State; /*!< Time communication state */
+
+}RTC_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RTC_Exported_Constants RTC Exported Constants
+ * @{
+ */
+
+/** @defgroup RTC_Mask_Definition RTC Mask Definition
+ * @{
+ */
+/* Masks Definition */
+#define RTC_TR_RESERVED_MASK ((uint32_t)0x007F7F7F)
+#define RTC_DR_RESERVED_MASK ((uint32_t)0x00FFFF3F)
+#define RTC_INIT_MASK ((uint32_t)0xFFFFFFFF)
+#define RTC_RSF_MASK ((uint32_t)0xFFFFFF5F)
+
+#define RTC_TIMEOUT_VALUE 1000
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Hour_Formats RTC Hour Formats
+ * @{
+ */
+#define RTC_HOURFORMAT_24 ((uint32_t)0x00000000)
+#define RTC_HOURFORMAT_12 ((uint32_t)0x00000040)
+
+#define IS_RTC_HOUR_FORMAT(FORMAT) (((FORMAT) == RTC_HOURFORMAT_12) || \
+ ((FORMAT) == RTC_HOURFORMAT_24))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Output_Polarity_Definitions RTC Output Polarity Definitions
+ * @{
+ */
+#define RTC_OUTPUT_POLARITY_HIGH ((uint32_t)0x00000000)
+#define RTC_OUTPUT_POLARITY_LOW ((uint32_t)0x00100000)
+
+#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OUTPUT_POLARITY_HIGH) || \
+ ((POL) == RTC_OUTPUT_POLARITY_LOW))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Output_Type_ALARM_OUT RTC Output Type ALARM OUT
+ * @{
+ */
+#define RTC_OUTPUT_TYPE_OPENDRAIN ((uint32_t)0x00000000)
+#define RTC_OUTPUT_TYPE_PUSHPULL ((uint32_t)0x00040000)
+
+#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OUTPUT_TYPE_OPENDRAIN) || \
+ ((TYPE) == RTC_OUTPUT_TYPE_PUSHPULL))
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Asynchronous_Predivider RTC Asynchronous Predivider
+ * @{
+ */
+#define IS_RTC_ASYNCH_PREDIV(PREDIV) ((PREDIV) <= (uint32_t)0x7F)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Synchronous_Predivider RTC Synchronous Predivider
+ * @{
+ */
+#define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= (uint32_t)0x7FFF)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Time_Definitions RTC Time Definitions
+ * @{
+ */
+#define IS_RTC_HOUR12(HOUR) (((HOUR) > (uint32_t)0) && ((HOUR) <= (uint32_t)12))
+#define IS_RTC_HOUR24(HOUR) ((HOUR) <= (uint32_t)23)
+#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= (uint32_t)59)
+#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= (uint32_t)59)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_AM_PM_Definitions RTC AM PM Definitions
+ * @{
+ */
+#define RTC_HOURFORMAT12_AM ((uint8_t)0x00)
+#define RTC_HOURFORMAT12_PM ((uint8_t)0x40)
+
+#define IS_RTC_HOURFORMAT12(PM) (((PM) == RTC_HOURFORMAT12_AM) || ((PM) == RTC_HOURFORMAT12_PM))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_DayLightSaving_Definitions RTC DayLightSaving Definitions
+ * @{
+ */
+#define RTC_DAYLIGHTSAVING_SUB1H ((uint32_t)0x00020000)
+#define RTC_DAYLIGHTSAVING_ADD1H ((uint32_t)0x00010000)
+#define RTC_DAYLIGHTSAVING_NONE ((uint32_t)0x00000000)
+
+#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DAYLIGHTSAVING_SUB1H) || \
+ ((SAVE) == RTC_DAYLIGHTSAVING_ADD1H) || \
+ ((SAVE) == RTC_DAYLIGHTSAVING_NONE))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_StoreOperation_Definitions RTC StoreOperation Definitions
+ * @{
+ */
+#define RTC_STOREOPERATION_RESET ((uint32_t)0x00000000)
+#define RTC_STOREOPERATION_SET ((uint32_t)0x00040000)
+
+#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_STOREOPERATION_RESET) || \
+ ((OPERATION) == RTC_STOREOPERATION_SET))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Input_parameter_format_definitions RTC Input parameter format definitions
+ * @{
+ */
+#define FORMAT_BIN ((uint32_t)0x000000000)
+#define FORMAT_BCD ((uint32_t)0x000000001)
+
+#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == FORMAT_BIN) || ((FORMAT) == FORMAT_BCD))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Year_Date_Definitions RTC Year Date Definitions
+ * @{
+ */
+#define IS_RTC_YEAR(YEAR) ((YEAR) <= (uint32_t)99)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Month_Date_Definitions RTC Month Date Definitions
+ * @{
+ */
+
+/* Coded in BCD format */
+#define RTC_MONTH_JANUARY ((uint8_t)0x01)
+#define RTC_MONTH_FEBRUARY ((uint8_t)0x02)
+#define RTC_MONTH_MARCH ((uint8_t)0x03)
+#define RTC_MONTH_APRIL ((uint8_t)0x04)
+#define RTC_MONTH_MAY ((uint8_t)0x05)
+#define RTC_MONTH_JUNE ((uint8_t)0x06)
+#define RTC_MONTH_JULY ((uint8_t)0x07)
+#define RTC_MONTH_AUGUST ((uint8_t)0x08)
+#define RTC_MONTH_SEPTEMBER ((uint8_t)0x09)
+#define RTC_MONTH_OCTOBER ((uint8_t)0x10)
+#define RTC_MONTH_NOVEMBER ((uint8_t)0x11)
+#define RTC_MONTH_DECEMBER ((uint8_t)0x12)
+
+#define IS_RTC_MONTH(MONTH) (((MONTH) >= (uint32_t)1) && ((MONTH) <= (uint32_t)12))
+#define IS_RTC_DATE(DATE) (((DATE) >= (uint32_t)1) && ((DATE) <= (uint32_t)31))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_WeekDay_Definitions RTC WeekDay Definitions
+ * @{
+ */
+#define RTC_WEEKDAY_MONDAY ((uint8_t)0x01)
+#define RTC_WEEKDAY_TUESDAY ((uint8_t)0x02)
+#define RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03)
+#define RTC_WEEKDAY_THURSDAY ((uint8_t)0x04)
+#define RTC_WEEKDAY_FRIDAY ((uint8_t)0x05)
+#define RTC_WEEKDAY_SATURDAY ((uint8_t)0x06)
+#define RTC_WEEKDAY_SUNDAY ((uint8_t)0x07)
+
+#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Alarm_Definitions RTC Alarm Definitions
+ * @{
+ */
+#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) >(uint32_t) 0) && ((DATE) <= (uint32_t)31))
+#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_AlarmDateWeekDay_Definitions RTC AlarmDateWeekDay Definitions
+ * @{
+ */
+#define RTC_ALARMDATEWEEKDAYSEL_DATE ((uint32_t)0x00000000)
+#define RTC_ALARMDATEWEEKDAYSEL_WEEKDAY ((uint32_t)0x40000000)
+
+#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_ALARMDATEWEEKDAYSEL_DATE) || \
+ ((SEL) == RTC_ALARMDATEWEEKDAYSEL_WEEKDAY))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_AlarmMask_Definitions RTC AlarmMask Definitions
+ * @{
+ */
+#define RTC_ALARMMASK_NONE ((uint32_t)0x00000000)
+#define RTC_ALARMMASK_DATEWEEKDAY RTC_ALRMAR_MSK4
+#define RTC_ALARMMASK_HOURS RTC_ALRMAR_MSK3
+#define RTC_ALARMMASK_MINUTES RTC_ALRMAR_MSK2
+#define RTC_ALARMMASK_SECONDS RTC_ALRMAR_MSK1
+#define RTC_ALARMMASK_ALL ((uint32_t)0x80808080)
+
+#define IS_ALARM_MASK(MASK) (((MASK) & 0x7F7F7F7F) == (uint32_t)RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Alarms_Definitions RTC Alarms Definitions
+ * @{
+ */
+#define RTC_ALARM_A RTC_CR_ALRAE
+
+#define IS_ALARM(ALARM) ((ALARM) == RTC_ALARM_A)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Alarm_Sub_Seconds_Value RTC Alarm Sub Seconds Value
+ * @{
+ */
+#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= (uint32_t)0x00007FFF)
+/**
+ * @}
+ */
+
+ /** @defgroup RTC_Alarm_Sub_Seconds_Masks_Definitions RTC Alarm Sub Seconds Masks Definitions
+ * @{
+ */
+#define RTC_ALARMSUBSECONDMASK_ALL ((uint32_t)0x00000000) /*!< All Alarm SS fields are masked.
+ There is no comparison on sub seconds
+ for Alarm */
+#define RTC_ALARMSUBSECONDMASK_SS14_1 ((uint32_t)0x01000000) /*!< SS[14:1] are don't care in Alarm
+ comparison. Only SS[0] is compared. */
+#define RTC_ALARMSUBSECONDMASK_SS14_2 ((uint32_t)0x02000000) /*!< SS[14:2] are don't care in Alarm
+ comparison. Only SS[1:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_3 ((uint32_t)0x03000000) /*!< SS[14:3] are don't care in Alarm
+ comparison. Only SS[2:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_4 ((uint32_t)0x04000000) /*!< SS[14:4] are don't care in Alarm
+ comparison. Only SS[3:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_5 ((uint32_t)0x05000000) /*!< SS[14:5] are don't care in Alarm
+ comparison. Only SS[4:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_6 ((uint32_t)0x06000000) /*!< SS[14:6] are don't care in Alarm
+ comparison. Only SS[5:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_7 ((uint32_t)0x07000000) /*!< SS[14:7] are don't care in Alarm
+ comparison. Only SS[6:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_8 ((uint32_t)0x08000000) /*!< SS[14:8] are don't care in Alarm
+ comparison. Only SS[7:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_9 ((uint32_t)0x09000000) /*!< SS[14:9] are don't care in Alarm
+ comparison. Only SS[8:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_10 ((uint32_t)0x0A000000) /*!< SS[14:10] are don't care in Alarm
+ comparison. Only SS[9:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_11 ((uint32_t)0x0B000000) /*!< SS[14:11] are don't care in Alarm
+ comparison. Only SS[10:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_12 ((uint32_t)0x0C000000) /*!< SS[14:12] are don't care in Alarm
+ comparison.Only SS[11:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_13 ((uint32_t)0x0D000000) /*!< SS[14:13] are don't care in Alarm
+ comparison. Only SS[12:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14 ((uint32_t)0x0E000000) /*!< SS[14] is don't care in Alarm
+ comparison.Only SS[13:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_None ((uint32_t)0x0F000000) /*!< SS[14:0] are compared and must match
+ to activate alarm. */
+
+#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK) (((MASK) == RTC_ALARMSUBSECONDMASK_ALL) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_1) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_2) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_3) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_4) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_5) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_6) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_7) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_8) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_9) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_10) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_11) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_12) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_13) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_None))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Interrupts_Definitions RTC Interrupts Definitions
+ * @{
+ */
+#define RTC_IT_TS ((uint32_t)0x00008000)
+#define RTC_IT_WUT ((uint32_t)0x00004000)
+#define RTC_IT_ALRA ((uint32_t)0x00001000)
+#define RTC_IT_TAMP ((uint32_t)0x00000004) /* Used only to Enable the Tamper Interrupt */
+#define RTC_IT_TAMP1 ((uint32_t)0x00020000)
+#define RTC_IT_TAMP2 ((uint32_t)0x00040000)
+#define RTC_IT_TAMP3 ((uint32_t)0x00080000)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Flags_Definitions RTC Flags Definitions
+ * @{
+ */
+#define RTC_FLAG_RECALPF ((uint32_t)0x00010000)
+#define RTC_FLAG_TAMP3F ((uint32_t)0x00008000)
+#define RTC_FLAG_TAMP2F ((uint32_t)0x00004000)
+#define RTC_FLAG_TAMP1F ((uint32_t)0x00002000)
+#define RTC_FLAG_TSOVF ((uint32_t)0x00001000)
+#define RTC_FLAG_TSF ((uint32_t)0x00000800)
+#define RTC_FLAG_WUTF ((uint32_t)0x00000400)
+#define RTC_FLAG_ALRAF ((uint32_t)0x00000100)
+#define RTC_FLAG_INITF ((uint32_t)0x00000040)
+#define RTC_FLAG_RSF ((uint32_t)0x00000020)
+#define RTC_FLAG_INITS ((uint32_t)0x00000010)
+#define RTC_FLAG_SHPF ((uint32_t)0x00000008)
+#define RTC_FLAG_WUTWF ((uint32_t)0x00000004)
+#define RTC_FLAG_ALRAWF ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup RTC_Exported_Macros RTC Exported Macros
+ * @{
+ */
+
+/** @brief Reset RTC handle state
+ * @param __HANDLE__: RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET)
+
+/**
+ * @brief Disable the write protection for RTC registers.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Instance->WPR = 0xCA; \
+ (__HANDLE__)->Instance->WPR = 0x53; \
+ } while(0)
+
+/**
+ * @brief Enable the write protection for RTC registers.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Instance->WPR = 0xFF; \
+ } while(0)
+
+/**
+ * @brief Enable the RTC ALARMA peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRAE))
+
+/**
+ * @brief Disable the RTC ALARMA peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRAE))
+
+/**
+ * @brief Enable the RTC Alarm interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC Alarm interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified RTC Alarm interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __FLAG__) ((((((__HANDLE__)->Instance->ISR)& ((__FLAG__)>> 4)) & 0x0000FFFF) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC Alarm's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_ALRAF
+ * @arg RTC_FLAG_ALRAWF
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Alarm's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_ALRAF
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+
+#define RTC_EXTI_LINE_ALARM_EVENT ((uint32_t)0x00020000) /*!< External interrupt line 17 Connected to the RTC Alarm event */
+#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)0x00080000) /*!< External interrupt line 19 Connected to the RTC Tamper and Time Stamp events */
+#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)0x00100000) /*!< External interrupt line 20 Connected to the RTC Wakeup event */
+
+/**
+ * @brief Enable the RTC Exti line.
+ * @param __EXTILINE__: specifies the RTC Exti sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_EXTI_LINE_ALARM_EVENT
+ * @arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
+ * @arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
+ * @retval None
+ */
+#define __HAL_RTC_EXTI_ENABLE_IT(__EXTILINE__) (EXTI->IMR |= (__EXTILINE__))
+
+/* alias define maintained for legacy */
+#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT
+
+/**
+ * @brief Disable the RTC Exti line.
+ * @param __EXTILINE__: specifies the RTC Exti sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_EXTI_LINE_ALARM_EVENT
+ * @arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
+ * @arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
+ * @retval None
+ */
+#define __HAL_RTC_EXTI_DISABLE_IT(__EXTILINE__) (EXTI->IMR &= ~(__EXTILINE__))
+
+/* alias define maintained for legacy */
+#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT
+
+/**
+ * @brief Generates a Software interrupt on selected EXTI line.
+ * @param __EXTILINE__: specifies the RTC Exti sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_EXTI_LINE_ALARM_EVENT
+ * @arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
+ * @arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
+ * @retval None
+ */
+#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTILINE__) (EXTI->SWIER |= (__EXTILINE__))
+
+/**
+ * @brief Clear the RTC Exti flags.
+ * @param __FLAG__: specifies the RTC Exti sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_EXTI_LINE_ALARM_EVENT
+ * @arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
+ * @arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
+ * @retval None
+ */
+#define __HAL_RTC_EXTI_CLEAR_FLAG(__FLAG__) (EXTI->PR = (__FLAG__))
+
+/* alias define maintained for legacy */
+#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG
+
+/**
+ * @}
+ */
+
+/* Include RTC HAL Extension module */
+#include "stm32f0xx_hal_rtc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RTC_Exported_Functions RTC Exported Functions
+ * @{
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group1
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group2
+ * @{
+ */
+
+/* RTC Time and Date functions ************************************************/
+HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group3
+ * @{
+ */
+/* RTC Alarm functions ********************************************************/
+HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm);
+HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format);
+void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group4
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc);
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group5
+ * @{
+ */
+/* Peripheral State functions *************************************************/
+HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Private_Functions
+ * @{
+ */
+HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef* hrtc);
+uint8_t RTC_ByteToBcd2(uint8_t Value);
+uint8_t RTC_Bcd2ToByte(uint8_t Value);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_RTC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_rtc_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,708 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_rtc_ex.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of RTC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_RTC_EX_H
+#define __STM32F0xx_HAL_RTC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RTCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RTCEx_Exported_Types RTCEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief RTC Tamper structure definition
+ */
+typedef struct
+{
+ uint32_t Tamper; /*!< Specifies the Tamper Pin.
+ This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */
+
+ uint32_t Trigger; /*!< Specifies the Tamper Trigger.
+ This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */
+
+ uint32_t Filter; /*!< Specifies the RTC Filter Tamper.
+ This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */
+
+ uint32_t SamplingFrequency; /*!< Specifies the sampling frequency.
+ This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */
+
+ uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration .
+ This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */
+
+ uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp .
+ This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */
+
+ uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection.
+ This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */
+}RTC_TamperTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants
+ * @{
+ */
+
+/** @defgroup RTCEx_Output_selection_Definitions RTCEx Output Selection Definition
+ * @{
+ */
+#define RTC_OUTPUT_DISABLE ((uint32_t)0x00000000)
+#define RTC_OUTPUT_ALARMA ((uint32_t)0x00200000)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#define RTC_OUTPUT_WAKEUP ((uint32_t)0x00600000)
+#endif
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \
+ ((OUTPUT) == RTC_OUTPUT_ALARMA) || \
+ ((OUTPUT) == RTC_OUTPUT_WAKEUP))
+#else
+#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \
+ ((OUTPUT) == RTC_OUTPUT_ALARMA))
+#endif
+/**
+ * @}
+ */
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB)
+/** @defgroup RTCEx_Backup_Registers_Definitions RTCEx Backup Registers Definition
+ * @{
+ */
+#define RTC_BKP_DR0 ((uint32_t)0x00000000)
+#define RTC_BKP_DR1 ((uint32_t)0x00000001)
+#define RTC_BKP_DR2 ((uint32_t)0x00000002)
+#define RTC_BKP_DR3 ((uint32_t)0x00000003)
+#define RTC_BKP_DR4 ((uint32_t)0x00000004)
+
+#define IS_RTC_BKP(BKP) ((BKP) < (uint32_t) RTC_BKP_NUMBER)
+/**
+ * @}
+ */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB) */
+
+/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTCEx Time Stamp Edges definition
+ * @{
+ */
+#define RTC_TIMESTAMPEDGE_RISING ((uint32_t)0x00000000)
+#define RTC_TIMESTAMPEDGE_FALLING ((uint32_t)0x00000008)
+
+#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \
+ ((EDGE) == RTC_TIMESTAMPEDGE_FALLING))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pins_Definitions RTCEx Tamper Pins Definition
+ * @{
+ */
+#define RTC_TAMPER_1 RTC_TAFCR_TAMP1E
+#define RTC_TAMPER_2 RTC_TAFCR_TAMP2E
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#define RTC_TAMPER_3 RTC_TAFCR_TAMP3E
+#endif
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#define IS_TAMPER(TAMPER) (((TAMPER) == RTC_TAMPER_1) || \
+ ((TAMPER) == RTC_TAMPER_2) || \
+ ((TAMPER) == RTC_TAMPER_3))
+#else
+#define IS_TAMPER(TAMPER) (((TAMPER) == RTC_TAMPER_1) || \
+ ((TAMPER) == RTC_TAMPER_2))
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_TimeStamp_Pin_Selections RTCEx TimeStamp Pin Selection
+ * @{
+ */
+#define RTC_TIMESTAMPPIN_PC13 ((uint32_t)0x00000000)
+
+#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_PC13))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Trigger_Definitions RTCEx Tamper Trigger Definition
+ * @{
+ */
+#define RTC_TAMPERTRIGGER_RISINGEDGE ((uint32_t)0x00000000)
+#define RTC_TAMPERTRIGGER_FALLINGEDGE ((uint32_t)0x00000002)
+#define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE
+#define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE
+
+#define IS_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL))
+
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Filter_Definitions RTCEx Tamper Filter Definition
+ * @{
+ */
+#define RTC_TAMPERFILTER_DISABLE ((uint32_t)0x00000000) /*!< Tamper filter is disabled */
+
+#define RTC_TAMPERFILTER_2SAMPLE ((uint32_t)0x00000800) /*!< Tamper is activated after 2
+ consecutive samples at the active level */
+#define RTC_TAMPERFILTER_4SAMPLE ((uint32_t)0x00001000) /*!< Tamper is activated after 4
+ consecutive samples at the active level */
+#define RTC_TAMPERFILTER_8SAMPLE ((uint32_t)0x00001800) /*!< Tamper is activated after 8
+ consecutive samples at the active level. */
+
+#define IS_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_8SAMPLE))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTCEx Tamper Sampling Frequencies Definition
+ * @{
+ */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 ((uint32_t)0x00000000) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 32768 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 ((uint32_t)0x00000100) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 16384 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 ((uint32_t)0x00000200) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 8192 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 ((uint32_t)0x00000300) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 4096 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 ((uint32_t)0x00000400) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 2048 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 ((uint32_t)0x00000500) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 1024 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 ((uint32_t)0x00000600) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 512 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 ((uint32_t)0x00000700) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 256 */
+
+#define IS_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTCEx Tamper Pin Precharge Duration Definition
+ * @{
+ */
+#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK ((uint32_t)0x00000000) /*!< Tamper pins are pre-charged before
+ sampling during 1 RTCCLK cycle */
+#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK ((uint32_t)0x00002000) /*!< Tamper pins are pre-charged before
+ sampling during 2 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK ((uint32_t)0x00004000) /*!< Tamper pins are pre-charged before
+ sampling during 4 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK ((uint32_t)0x00006000) /*!< Tamper pins are pre-charged before
+ sampling during 8 RTCCLK cycles */
+
+#define IS_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTCEx Tamper TimeStampOnTamperDetection Definition
+ * @{
+ */
+#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE ((uint32_t)RTC_TAFCR_TAMPTS) /*!< TimeStamp on Tamper Detection event saved */
+#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event is not saved */
+
+#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \
+ ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTCEx Tamper Pull UP Definition
+ * @{
+ */
+#define RTC_TAMPER_PULLUP_ENABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event saved */
+#define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAFCR_TAMPPUDIS) /*!< TimeStamp on Tamper Detection event is not saved */
+
+#define IS_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \
+ ((STATE) == RTC_TAMPER_PULLUP_DISABLE))
+/**
+ * @}
+ */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/** @defgroup RTCEx_Wakeup_Timer_Definitions RTCEx Wakeup Timer Definition
+ * @{
+ */
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 ((uint32_t)0x00000000)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 ((uint32_t)0x00000001)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 ((uint32_t)0x00000002)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 ((uint32_t)0x00000003)
+#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS ((uint32_t)0x00000004)
+#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS ((uint32_t)0x00000006)
+
+#define IS_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))
+
+#define IS_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFF)
+/**
+ * @}
+ */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+
+/** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth calib period Definition
+ * @{
+ */
+#define RTC_SMOOTHCALIB_PERIOD_32SEC ((uint32_t)0x00000000) /*!< If RTCCLK = 32768 Hz, Smooth calibation
+ period is 32s, else 2exp20 RTCCLK seconds */
+#define RTC_SMOOTHCALIB_PERIOD_16SEC ((uint32_t)0x00002000) /*!< If RTCCLK = 32768 Hz, Smooth calibation
+ period is 16s, else 2exp19 RTCCLK seconds */
+#define RTC_SMOOTHCALIB_PERIOD_8SEC ((uint32_t)0x00004000) /*!< If RTCCLK = 32768 Hz, Smooth calibation
+ period is 8s, else 2exp18 RTCCLK seconds */
+
+#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \
+ ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \
+ ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTCEx Smooth calib Plus pulses Definition
+ * @{
+ */
+#define RTC_SMOOTHCALIB_PLUSPULSES_SET ((uint32_t)0x00008000) /*!< The number of RTCCLK pulses added
+ during a X -second window = Y - CALM[8:0]
+ with Y = 512, 256, 128 when X = 32, 16, 8 */
+#define RTC_SMOOTHCALIB_PLUSPULSES_RESET ((uint32_t)0x00000000) /*!< The number of RTCCLK pulses subbstited
+ during a 32-second window = CALM[8:0] */
+
+#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \
+ ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Smooth_calib_Minus_pulses_Definitions RTCEx Smooth calib Minus pulses Definition
+ * @{
+ */
+#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FF)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Add_1_Second_Parameter_Definition RTCEx Add 1 Second Parameter Definition
+ * @{
+ */
+#define RTC_SHIFTADD1S_RESET ((uint32_t)0x00000000)
+#define RTC_SHIFTADD1S_SET ((uint32_t)0x80000000)
+
+#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \
+ ((SEL) == RTC_SHIFTADD1S_SET))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Substract_Fraction_Of_Second_Value RTCEx Substract Fraction Of Second Value
+ * @{
+ */
+#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFF)
+/**
+ * @}
+ */
+
+ /** @defgroup RTCEx_Calib_Output_selection_Definitions RTCEx Calib Output selection Definition
+ * @{
+ */
+#define RTC_CALIBOUTPUT_512HZ ((uint32_t)0x00000000)
+#define RTC_CALIBOUTPUT_1HZ ((uint32_t)0x00080000)
+
+#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \
+ ((OUTPUT) == RTC_CALIBOUTPUT_1HZ))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros
+ * @{
+ */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/**
+ * @brief Enable the RTC WakeUp Timer peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+
+/**
+ * @brief Enable the RTC TimeStamp peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/**
+ * @brief Disable the RTC WakeUp Timer peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+
+/**
+ * @brief Disable the RTC TimeStamp peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
+
+/**
+ * @brief Enable the RTC calibration output.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))
+
+/**
+ * @brief Disable the calibration output.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
+
+/**
+ * @brief Enable the clock reference detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))
+
+/**
+ * @brief Disable the clock reference detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
+
+/**
+ * @brief Enable the RTC TimeStamp interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/**
+ * @brief Enable the RTC WakeUpTimer interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+
+/**
+ * @brief Disable the RTC TimeStamp interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/**
+ * @brief Disable the RTC WakeUpTimer interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+
+/**
+ * @brief Check whether the specified RTC Tamper interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TAMP1
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/**
+ * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+
+/**
+ * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC TimeStamp's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC TimeStamp Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TSF
+ * @arg RTC_FLAG_TSOVF
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/**
+ * @brief Get the selected RTC WakeUpTimer's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC WakeUpTimer Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_WUTF
+ * @arg RTC_FLAG_WUTWF
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+
+/**
+ * @brief Get the selected RTC Tamper's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC shift operation's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC shift operation Flag is pending or not.
+ * This parameter can be:
+ * @arg RTC_FLAG_SHPF
+ * @retval None
+ */
+#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Time Stamp's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TSF
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+ * @brief Clear the RTC Tamper's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/**
+ * @brief Clear the RTC Wake Up timer's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_WUTF
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RTCEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RTCEx_Exported_Functions_Group1
+ * @{
+ */
+
+/* RTC TimeStamp and Tamper functions *****************************************/
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format);
+
+HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
+HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
+void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);
+
+void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc);
+#endif
+void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+#endif
+/**
+ * @}
+ */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
+/** @addtogroup RTCEx_Exported_Functions_Group2
+ * @{
+ */
+
+/* RTC Wake-up functions ******************************************************/
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
+uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+#endif
+/**
+ * @}
+ */
+
+/** @addtogroup RTCEx_Exported_Functions_Group3
+ * @{
+ */
+
+/* Extension Control functions ************************************************/
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB)
+void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
+uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB) */
+
+HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue);
+HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
+HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/* Extension RTC features functions *******************************************/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_RTC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_smartcard.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,818 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_smartcard.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of SMARTCARD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_SMARTCARD_H
+#define __STM32F0xx_HAL_SMARTCARD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SMARTCARD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types
+ * @{
+ */
+
+
+/**
+ * @brief SMARTCARD Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< Configures the SmartCard communication baud rate.
+ The baud rate register is computed using the following formula:
+ Baud Rate Register = ((PCLKx) / ((hsmartcard->Init.BaudRate))) */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter @ref SMARTCARD_Word_Length can only be set to 9 (8 data + 1 parity bits). */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits @ref SMARTCARD_Stop_Bits.
+ Only 1.5 stop bits are authorized in SmartCard mode. */
+
+ uint16_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref SMARTCARD_Parity
+ @note The parity is enabled by default (PCE is forced to 1).
+ Since the WordLength is forced to 8 bits + parity, M is
+ forced to 1 and the parity bit is the 9th bit. */
+
+ uint16_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref SMARTCARD_Mode */
+
+ uint16_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
+ This parameter can be a value of @ref SMARTCARD_Clock_Polarity */
+
+ uint16_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref SMARTCARD_Clock_Phase */
+
+ uint16_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref SMARTCARD_Last_Bit */
+
+ uint16_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected.
+ Selecting the single sample method increases the receiver tolerance to clock
+ deviations. This parameter can be a value of @ref SMARTCARD_OneBit_Sampling. */
+
+ uint8_t Prescaler; /*!< Specifies the SmartCard Prescaler */
+
+ uint8_t GuardTime; /*!< Specifies the SmartCard Guard Time */
+
+ uint16_t NACKEnable; /*!< Specifies whether the SmartCard NACK transmission is enabled
+ in case of parity error.
+ This parameter can be a value of @ref SMARTCARD_NACK_Enable */
+
+ uint32_t TimeOutEnable; /*!< Specifies whether the receiver timeout is enabled.
+ This parameter can be a value of @ref SMARTCARD_Timeout_Enable*/
+
+ uint32_t TimeOutValue; /*!< Specifies the receiver time out value in number of baud blocks:
+ it is used to implement the Character Wait Time (CWT) and
+ Block Wait Time (BWT). It is coded over 24 bits. */
+
+ uint8_t BlockLength; /*!< Specifies the SmartCard Block Length in T=1 Reception mode.
+ This parameter can be any value from 0x0 to 0xFF */
+
+ uint8_t AutoRetryCount; /*!< Specifies the SmartCard auto-retry count (number of retries in
+ receive and transmit mode). When set to 0, retransmission is
+ disabled. Otherwise, its maximum value is 7 (before signalling
+ an error) */
+
+}SMARTCARD_InitTypeDef;
+
+/**
+ * @brief SMARTCARD advanced features initalization structure definition
+ */
+typedef struct
+{
+ uint32_t AdvFeatureInit; /*!< Specifies which advanced SMARTCARD features is initialized. Several
+ advanced features may be initialized at the same time. This parameter
+ can be a value of @ref SMARTCARD_Advanced_Features_Initialization_Type */
+
+ uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted.
+ This parameter can be a value of @ref SMARTCARD_Tx_Inv */
+
+ uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted.
+ This parameter can be a value of @ref SMARTCARD_Rx_Inv */
+
+ uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic
+ vs negative/inverted logic).
+ This parameter can be a value of @ref SMARTCARD_Data_Inv */
+
+ uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped.
+ This parameter can be a value of @ref SMARTCARD_Rx_Tx_Swap */
+
+ uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled.
+ This parameter can be a value of @ref SMARTCARD_Overrun_Disable */
+
+ uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error.
+ This parameter can be a value of @ref SMARTCARD_DMA_Disable_on_Rx_Error */
+
+ uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line.
+ This parameter can be a value of @ref SMARTCARD_MSB_First */
+}SMARTCARD_AdvFeatureInitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_SMARTCARD_STATE_RESET = 0x00, /*!< Peripheral is not initialized */
+ HAL_SMARTCARD_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_SMARTCARD_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_SMARTCARD_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_SMARTCARD_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_SMARTCARD_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_SMARTCARD_STATE_ERROR = 0x04 /*!< Error */
+}HAL_SMARTCARD_StateTypeDef;
+
+/**
+ * @brief SMARTCARD clock sources
+ */
+typedef enum
+{
+ SMARTCARD_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */
+ SMARTCARD_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */
+ SMARTCARD_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */
+ SMARTCARD_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */
+ SMARTCARD_CLOCKSOURCE_UNDEFINED = 0x10 /*!< undefined clock source */
+}SMARTCARD_ClockSourceTypeDef;
+
+/**
+ * @brief SMARTCARD handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /*!< USART registers base address */
+
+ SMARTCARD_InitTypeDef Init; /*!< SmartCard communication parameters */
+
+ SMARTCARD_AdvFeatureInitTypeDef AdvancedInit; /*!< SmartCard advanced features initialization parameters */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to SmartCard Tx transfer Buffer */
+
+ uint16_t TxXferSize; /*!< SmartCard Tx Transfer size */
+
+ uint16_t TxXferCount; /*!< SmartCard Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /*!< Pointer to SmartCard Rx transfer Buffer */
+
+ uint16_t RxXferSize; /*!< SmartCard Rx Transfer size */
+
+ uint16_t RxXferCount; /*!< SmartCard Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /*!< SmartCard Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< SmartCard Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ HAL_SMARTCARD_StateTypeDef State; /*!< SmartCard communication state */
+
+ __IO uint32_t ErrorCode; /*!< SmartCard Error code
+ This parameter can be a value of @ref SMARTCARD_Error */
+
+}SMARTCARD_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported constants
+ * @{
+ */
+
+/** @defgroup SMARTCARD_Error SMARTCARD Error
+ * @{
+ */
+#define HAL_SMARTCARD_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_SMARTCARD_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */
+#define HAL_SMARTCARD_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */
+#define HAL_SMARTCARD_ERROR_FE ((uint32_t)0x00000004) /*!< frame error */
+#define HAL_SMARTCARD_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */
+#define HAL_SMARTCARD_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+#define HAL_SMARTCARD_ERROR_RTO ((uint32_t)0x00000020) /*!< Receiver TimeOut error */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length
+ * @{
+ */
+#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
+#define IS_SMARTCARD_WORD_LENGTH(LENGTH) ((LENGTH) == SMARTCARD_WORDLENGTH_9B)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Stop Bits
+ * @{
+ */
+#define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP))
+#define IS_SMARTCARD_STOPBITS(STOPBITS) ((STOPBITS) == SMARTCARD_STOPBITS_1_5)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Parity SMARTCARD Parity
+ * @{
+ */
+#define SMARTCARD_PARITY_EVEN ((uint16_t)USART_CR1_PCE)
+#define SMARTCARD_PARITY_ODD ((uint16_t)(USART_CR1_PCE | USART_CR1_PS))
+#define IS_SMARTCARD_PARITY(PARITY) (((PARITY) == SMARTCARD_PARITY_EVEN) || \
+ ((PARITY) == SMARTCARD_PARITY_ODD))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Mode SMARTCARD Transfer Mode
+ * @{
+ */
+#define SMARTCARD_MODE_RX ((uint16_t)USART_CR1_RE)
+#define SMARTCARD_MODE_TX ((uint16_t)USART_CR1_TE)
+#define SMARTCARD_MODE_TX_RX ((uint16_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_SMARTCARD_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity
+ * @{
+ */
+#define SMARTCARD_POLARITY_LOW ((uint16_t)0x0000)
+#define SMARTCARD_POLARITY_HIGH ((uint16_t)USART_CR2_CPOL)
+#define IS_SMARTCARD_POLARITY(CPOL) (((CPOL) == SMARTCARD_POLARITY_LOW) || ((CPOL) == SMARTCARD_POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase
+ * @{
+ */
+#define SMARTCARD_PHASE_1EDGE ((uint16_t)0x0000)
+#define SMARTCARD_PHASE_2EDGE ((uint16_t)USART_CR2_CPHA)
+#define IS_SMARTCARD_PHASE(CPHA) (((CPHA) == SMARTCARD_PHASE_1EDGE) || ((CPHA) == SMARTCARD_PHASE_2EDGE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit
+ * @{
+ */
+#define SMARTCARD_LASTBIT_DISABLED ((uint16_t)0x0000)
+#define SMARTCARD_LASTBIT_ENABLED ((uint16_t)USART_CR2_LBCL)
+#define IS_SMARTCARD_LASTBIT(LASTBIT) (((LASTBIT) == SMARTCARD_LASTBIT_DISABLED) || \
+ ((LASTBIT) == SMARTCARD_LASTBIT_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_OneBit_Sampling SMARTCARD One Bit Sampling Method
+ * @{
+ */
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLED ((uint16_t)0x0000)
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLED ((uint16_t)USART_CR3_ONEBIT)
+#define IS_SMARTCARD_ONEBIT_SAMPLING(ONEBIT) (((ONEBIT) == SMARTCARD_ONEBIT_SAMPLING_DISABLED) || \
+ ((ONEBIT) == SMARTCARD_ONEBIT_SAMPLING_ENABLED))
+/**
+ * @}
+ */
+
+
+/** @defgroup SMARTCARD_NACK_Enable SMARTCARD NACK Enable
+ * @{
+ */
+#define SMARTCARD_NACK_ENABLED ((uint16_t)USART_CR3_NACK)
+#define SMARTCARD_NACK_DISABLED ((uint16_t)0x0000)
+#define IS_SMARTCARD_NACK(NACK) (((NACK) == SMARTCARD_NACK_ENABLED) || \
+ ((NACK) == SMARTCARD_NACK_DISABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Timeout_Enable SMARTCARD Timeout Enable
+ * @{
+ */
+#define SMARTCARD_TIMEOUT_DISABLED ((uint32_t)0x00000000)
+#define SMARTCARD_TIMEOUT_ENABLED ((uint32_t)USART_CR2_RTOEN)
+#define IS_SMARTCARD_TIMEOUT(TIMEOUT) (((TIMEOUT) == SMARTCARD_TIMEOUT_DISABLED) || \
+ ((TIMEOUT) == SMARTCARD_TIMEOUT_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Advanced_Features_Initialization_Type SMARTCARD advanced feature initialization type
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_NO_INIT ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_TXINVERT_INIT ((uint32_t)0x00000001)
+#define SMARTCARD_ADVFEATURE_RXINVERT_INIT ((uint32_t)0x00000002)
+#define SMARTCARD_ADVFEATURE_DATAINVERT_INIT ((uint32_t)0x00000004)
+#define SMARTCARD_ADVFEATURE_SWAP_INIT ((uint32_t)0x00000008)
+#define SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT ((uint32_t)0x00000010)
+#define SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT ((uint32_t)0x00000020)
+#define SMARTCARD_ADVFEATURE_MSBFIRST_INIT ((uint32_t)0x00000080)
+#define IS_SMARTCARD_ADVFEATURE_INIT(INIT) ((INIT) <= (SMARTCARD_ADVFEATURE_NO_INIT | \
+ SMARTCARD_ADVFEATURE_TXINVERT_INIT | \
+ SMARTCARD_ADVFEATURE_RXINVERT_INIT | \
+ SMARTCARD_ADVFEATURE_DATAINVERT_INIT | \
+ SMARTCARD_ADVFEATURE_SWAP_INIT | \
+ SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT | \
+ SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT | \
+ SMARTCARD_ADVFEATURE_MSBFIRST_INIT))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Tx_Inv SMARTCARD advanced feature TX pin active level inversion
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_TXINV_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_TXINV_ENABLE ((uint32_t)USART_CR2_TXINV)
+#define IS_SMARTCARD_ADVFEATURE_TXINV(TXINV) (((TXINV) == SMARTCARD_ADVFEATURE_TXINV_DISABLE) || \
+ ((TXINV) == SMARTCARD_ADVFEATURE_TXINV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Rx_Inv SMARTCARD advanced feature RX pin active level inversion
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_RXINV_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_RXINV_ENABLE ((uint32_t)USART_CR2_RXINV)
+#define IS_SMARTCARD_ADVFEATURE_RXINV(RXINV) (((RXINV) == SMARTCARD_ADVFEATURE_RXINV_DISABLE) || \
+ ((RXINV) == SMARTCARD_ADVFEATURE_RXINV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Data_Inv SMARTCARD advanced feature Binary Data inversion
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_DATAINV_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_DATAINV_ENABLE ((uint32_t)USART_CR2_DATAINV)
+#define IS_SMARTCARD_ADVFEATURE_DATAINV(DATAINV) (((DATAINV) == SMARTCARD_ADVFEATURE_DATAINV_DISABLE) || \
+ ((DATAINV) == SMARTCARD_ADVFEATURE_DATAINV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Rx_Tx_Swap SMARTCARD advanced feature RX TX pins swap
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_SWAP_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_SWAP_ENABLE ((uint32_t)USART_CR2_SWAP)
+#define IS_SMARTCARD_ADVFEATURE_SWAP(SWAP) (((SWAP) == SMARTCARD_ADVFEATURE_SWAP_DISABLE) || \
+ ((SWAP) == SMARTCARD_ADVFEATURE_SWAP_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Overrun_Disable SMARTCARD advanced feature Overrun Disable
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_OVERRUN_ENABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_OVERRUN_DISABLE ((uint32_t)USART_CR3_OVRDIS)
+#define IS_SMARTCARD_OVERRUN(OVERRUN) (((OVERRUN) == SMARTCARD_ADVFEATURE_OVERRUN_ENABLE) || \
+ ((OVERRUN) == SMARTCARD_ADVFEATURE_OVERRUN_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_DMA_Disable_on_Rx_Error SMARTCARD advanced feature DMA Disable on Rx Error
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR ((uint32_t)USART_CR3_DDRE)
+#define IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(DMA) (((DMA) == SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR) || \
+ ((DMA) == SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_MSB_First SMARTCARD advanced feature MSB first
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE ((uint32_t)USART_CR2_MSBFIRST)
+#define IS_SMARTCARD_ADVFEATURE_MSBFIRST(MSBFIRST) (((MSBFIRST) == SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE) || \
+ ((MSBFIRST) == SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Flags SMARTCARD Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the ISR register
+ * @{
+ */
+#define SMARTCARD_FLAG_REACK ((uint32_t)0x00400000)
+#define SMARTCARD_FLAG_TEACK ((uint32_t)0x00200000)
+#define SMARTCARD_FLAG_BUSY ((uint32_t)0x00010000)
+#define SMARTCARD_FLAG_EOBF ((uint32_t)0x00001000)
+#define SMARTCARD_FLAG_RTOF ((uint32_t)0x00000800)
+#define SMARTCARD_FLAG_TXE ((uint32_t)0x00000080)
+#define SMARTCARD_FLAG_TC ((uint32_t)0x00000040)
+#define SMARTCARD_FLAG_RXNE ((uint32_t)0x00000020)
+#define SMARTCARD_FLAG_ORE ((uint32_t)0x00000008)
+#define SMARTCARD_FLAG_NE ((uint32_t)0x00000004)
+#define SMARTCARD_FLAG_FE ((uint32_t)0x00000002)
+#define SMARTCARD_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Interrupt_definition SMARTCARD Interrupts Definition
+ * Elements values convention: 0000ZZZZ0XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ * @{
+ */
+
+#define SMARTCARD_IT_PE ((uint16_t)0x0028)
+#define SMARTCARD_IT_TXE ((uint16_t)0x0727)
+#define SMARTCARD_IT_TC ((uint16_t)0x0626)
+#define SMARTCARD_IT_RXNE ((uint16_t)0x0525)
+
+#define SMARTCARD_IT_ERR ((uint16_t)0x0060)
+#define SMARTCARD_IT_ORE ((uint16_t)0x0300)
+#define SMARTCARD_IT_NE ((uint16_t)0x0200)
+#define SMARTCARD_IT_FE ((uint16_t)0x0100)
+
+#define SMARTCARD_IT_EOB ((uint16_t)0x0C3B)
+#define SMARTCARD_IT_RTO ((uint16_t)0x0B3A)
+/**
+ * @}
+ */
+
+
+/** @defgroup SMARTCARD_IT_CLEAR_Flags SMARTCARD Interruption Clear Flags
+ * @{
+ */
+#define SMARTCARD_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
+#define SMARTCARD_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
+#define SMARTCARD_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
+#define SMARTCARD_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
+#define SMARTCARD_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
+#define SMARTCARD_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */
+#define SMARTCARD_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Request_Parameters SMARTCARD Request Parameters
+ * @{
+ */
+#define SMARTCARD_RXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
+#define SMARTCARD_TXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
+#define IS_SMARTCARD_REQUEST_PARAMETER(PARAM) (((PARAM) == SMARTCARD_RXDATA_FLUSH_REQUEST) || \
+ ((PARAM) == SMARTCARD_TXDATA_FLUSH_REQUEST))
+/**
+ * @}
+ */
+
+
+/** @defgroup SMARTCARD_CR3_SCARCNT_LSB_POS SMARTCARD auto retry counter LSB position in CR3 register
+ * @{
+ */
+#define SMARTCARD_CR3_SCARCNT_LSB_POS ((uint32_t) 17)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_GTPR_GT_LSB_POS SMARTCARD guard time value LSB position in GTPR register
+ * @{
+ */
+#define SMARTCARD_GTPR_GT_LSB_POS ((uint32_t) 8)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_RTOR_BLEN_LSB_POS SMARTCARD block length LSB position in RTOR register
+ * @{
+ */
+#define SMARTCARD_RTOR_BLEN_LSB_POS ((uint32_t) 24)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Interruption_Mask SMARTCARD interruptions flag mask
+ * @{
+ */
+#define SMARTCARD_IT_MASK ((uint16_t)0x001F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros
+ * @{
+ */
+
+/** @brief Reset SMARTCARD handle state
+ * @param __HANDLE__: SMARTCARD handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMARTCARD_STATE_RESET)
+
+/** @brief Checks whether the specified Smartcard flag is set or not.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_FLAG_REACK: Receive enable ackowledge flag
+ * @arg SMARTCARD_FLAG_TEACK: Transmit enable ackowledge flag
+ * @arg SMARTCARD_FLAG_BUSY: Busy flag
+ * @arg SMARTCARD_FLAG_EOBF: End of block flag
+ * @arg SMARTCARD_FLAG_RTOF: Receiver timeout flag
+ * @arg SMARTCARD_FLAG_TXE: Transmit data register empty flag
+ * @arg SMARTCARD_FLAG_TC: Transmission Complete flag
+ * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag
+ * @arg SMARTCARD_FLAG_ORE: OverRun Error flag
+ * @arg SMARTCARD_FLAG_NE: Noise Error flag
+ * @arg SMARTCARD_FLAG_FE: Framing Error flag
+ * @arg SMARTCARD_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+
+/** @brief Enables the specified SmartCard interrupt.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __INTERRUPT__: specifies the SMARTCARD interrupt to enable.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+ * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
+
+/** @brief Disables the specified SmartCard interrupt.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __INTERRUPT__: specifies the SMARTCARD interrupt to disable.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+ * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
+
+
+/** @brief Checks whether the specified SmartCard interrupt has occurred or not.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __IT__: specifies the SMARTCARD interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+ * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_ORE: OverRun Error interrupt
+ * @arg SMARTCARD_IT_NE: Noise Error interrupt
+ * @arg SMARTCARD_IT_FE: Framing Error interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08)))
+
+/** @brief Checks whether the specified SmartCard interrupt interrupt source is enabled.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __IT__: specifies the SMARTCARD interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+ * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_ORE: OverRun Error interrupt
+ * @arg SMARTCARD_IT_NE: Noise Error interrupt
+ * @arg SMARTCARD_IT_FE: Framing Error interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1 : \
+ (((((uint8_t)(__IT__)) >> 5U) == 2)? (__HANDLE__)->Instance->CR2 : \
+ (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & SMARTCARD_IT_MASK)))
+
+
+/** @brief Clears the specified SMARTCARD ISR flag, in setting the proper ICR register flag.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+ * to clear the corresponding interrupt
+ * This parameter can be one of the following values:
+ * @arg USART_CLEAR_PEF: Parity Error Clear Flag
+ * @arg USART_CLEAR_FEF: Framing Error Clear Flag
+ * @arg USART_CLEAR_NEF: Noise detected Clear Flag
+ * @arg USART_CLEAR_OREF: OverRun Error Clear Flag
+ * @arg USART_CLEAR_TCF: Transmission Complete Clear Flag
+ * @arg USART_CLEAR_RTOF: Receiver Time Out Clear Flag
+ * @arg USART_CLEAR_EOBF: End Of Block Clear Flag
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
+
+/** @brief Set a specific SMARTCARD request flag.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __REQ__: specifies the request flag to set
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_RXDATA_FLUSH_REQUEST: Receive Data flush Request
+ * @arg SMARTCARD_TXDATA_FLUSH_REQUEST: Transmit data flush Request
+ *
+ * @retval None
+ */
+#define __HAL_SMARTCARD_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
+
+/** @brief Enable the USART associated to the SMARTCARD Handle
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3 to select the USART peripheral
+ * @retval None
+ */
+#define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable the USART associated to the SMARTCARD Handle
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3 to select the USART peripheral
+ * @retval None
+ */
+#define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/** @brief Check the Baud rate range. The maximum Baud Rate is derived from the
+ * maximum clock on F0 (i.e. 48 MHz) divided by the oversampling used
+ * on the SMARTCARD (i.e. 16)
+ * @param __BAUDRATE__: Baud rate set by the configuration function.
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_SMARTCARD_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 4500001)
+
+/** @brief Check the block length range. The maximum SMARTCARD block length is 0xFF.
+ * @param __LENGTH__: block length.
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_SMARTCARD_BLOCKLENGTH(__LENGTH__) ((__LENGTH__) <= 0xFF)
+
+/** @brief Check the receiver timeout value. The maximum SMARTCARD receiver timeout
+ * value is 0xFFFFFF.
+ * @param __TIMEOUTVALUE__: receiver timeout value.
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_SMARTCARD_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFF)
+
+/** @brief Check the SMARTCARD autoretry counter value. The maximum number of
+ * retransmissions is 0x7.
+ * @param __COUNT__: number of retransmissions
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_SMARTCARD_AUTORETRY_COUNT(__COUNT__) ((__COUNT__) <= 0x7)
+
+/**
+ * @}
+ */
+
+/* Include SMARTCARD HAL Extended module */
+#include "stm32f0xx_hal_smartcard_ex.h"
+
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup SMARTCARD_Exported_Functions SMARTCARD Exported Functions
+ * @{
+ */
+
+/** @addtogroup SMARTCARD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard);
+HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard);
+/**
+ * @}
+ */
+
+/** @addtogroup SMARTCARD_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard);
+/**
+ * @}
+ */
+
+/** @addtogroup SMARTCARD_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsmartcard);
+uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsmartcard);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_SMARTCARD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_smartcard_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,330 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_smartcard_ex.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of SMARTCARD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_SMARTCARD_EX_H
+#define __STM32F0xx_HAL_SMARTCARD_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SMARTCARDEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup SMARTCARD_Extended_Exported_Macros SMARTCARDEx Exported Macros
+ * @{
+ */
+
+/** @brief Reports the SMARTCARD clock source.
+ * @param __HANDLE__: specifies the SMARTCARD Handle
+ * @param __CLOCKSOURCE__ : output variable
+ * @retval the SMARTCARD clocking source, written in __CLOCKSOURCE__.
+ */
+#if defined(STM32F031x6) || defined(STM32F038xx)
+#define __HAL_SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } while(0)
+#elif defined (STM32F030x8) || \
+ defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F051x8) || defined (STM32F058xx)
+#define __HAL_SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+#define __HAL_SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F091xC) || defined(STM32F098xx)
+#define __HAL_SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART7) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART8) \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#endif /* defined(STM32F031x6) || defined(STM32F038xx) */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions ****************************/
+/* IO operation functions *****************************************************/
+
+/** @addtogroup SMARTCARDEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup SMARTCARDEx_Exported_Functions_Group1
+ * @{
+ */
+
+/* Peripheral Control functions ***********************************************/
+void HAL_SMARTCARDEx_BlockLength_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t BlockLength);
+void HAL_SMARTCARDEx_TimeOut_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t TimeOutValue);
+HAL_StatusTypeDef HAL_SMARTCARDEx_EnableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard);
+HAL_StatusTypeDef HAL_SMARTCARDEx_DisableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard);
+
+/* Peripheral State and Error functions ***************************************/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_SMARTCARD_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_smbus.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,617 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_smbus.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of SMBUS HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_SMBUS_H
+#define __STM32F0xx_HAL_SMBUS_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SMBUS
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SMBUS_Exported_Types SMBUS Exported Types
+ * @{
+ */
+
+/**
+ * @brief SMBUS Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Timing; /*!< Specifies the SMBUS_TIMINGR_register value.
+ This parameter calculated by referring to SMBUS initialization
+ section in Reference manual */
+ uint32_t AnalogFilter; /*!< Specifies if Analog Filter is enable or not.
+ This parameter can be a a value of @ref SMBUS_Analog_Filter */
+
+ uint32_t OwnAddress1; /*!< Specifies the first device own address.
+ This parameter can be a 7-bit or 10-bit address. */
+
+ uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode for master is selected.
+ This parameter can be a value of @ref SMBUS_addressing_mode */
+
+ uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
+ This parameter can be a value of @ref SMBUS_dual_addressing_mode */
+
+ uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
+ This parameter can be a 7-bit address. */
+
+ uint32_t OwnAddress2Masks; /*!< Specifies the acknoledge mask address second device own address if dual addressing mode is selected
+ This parameter can be a value of @ref SMBUS_own_address2_masks. */
+
+ uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
+ This parameter can be a value of @ref SMBUS_general_call_addressing_mode. */
+
+ uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
+ This parameter can be a value of @ref SMBUS_nostretch_mode */
+
+ uint32_t PacketErrorCheckMode; /*!< Specifies if Packet Error Check mode is selected.
+ This parameter can be a value of @ref SMBUS_packet_error_check_mode */
+
+ uint32_t PeripheralMode; /*!< Specifies which mode of Periphal is selected.
+ This parameter can be a value of @ref SMBUS_peripheral_mode */
+
+ uint32_t SMBusTimeout; /*!< Specifies the content of the 32 Bits SMBUS_TIMEOUT_register value.
+ (Enable bits and different timeout values)
+ This parameter calculated by referring to SMBUS initialization
+ section in Reference manual */
+} SMBUS_InitTypeDef;
+
+/**
+ * @brief SMBUS handle Structure definition
+ */
+typedef struct
+{
+ I2C_TypeDef *Instance; /*!< SMBUS registers base address */
+
+ SMBUS_InitTypeDef Init; /*!< SMBUS communication parameters */
+
+ uint8_t *pBuffPtr; /*!< Pointer to SMBUS transfer buffer */
+
+ uint16_t XferSize; /*!< SMBUS transfer size */
+
+ __IO uint16_t XferCount; /*!< SMBUS transfer counter */
+
+ __IO uint32_t XferOptions; /*!< SMBUS transfer options */
+
+ __IO uint32_t PreviousState; /*!< SMBUS communication Previous state
+ This parameter can be a value of @ref SMBUS_State */
+
+ HAL_LockTypeDef Lock; /*!< SMBUS locking object */
+
+ __IO uint32_t State; /*!< SMBUS communication state
+ This parameter can be a value of @ref SMBUS_State */
+
+ __IO uint32_t ErrorCode; /*!< SMBUS Error code
+ This parameter can be a value of @ref SMBUS_Error */
+
+}SMBUS_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup SMBUS_Exported_Constants SMBUS Exported Constants
+ * @{
+ */
+
+/** @defgroup SMBUS_Error SMBUS Error
+ * @{
+ */
+#define HAL_SMBUS_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_SMBUS_ERROR_BERR ((uint32_t)0x00000001) /*!< BERR error */
+#define HAL_SMBUS_ERROR_ARLO ((uint32_t)0x00000002) /*!< ARLO error */
+#define HAL_SMBUS_ERROR_ACKF ((uint32_t)0x00000004) /*!< ACKF error */
+#define HAL_SMBUS_ERROR_OVR ((uint32_t)0x00000008) /*!< OVR error */
+#define HAL_SMBUS_ERROR_HALTIMEOUT ((uint32_t)0x00000010) /*!< Timeout error */
+#define HAL_SMBUS_ERROR_BUSTIMEOUT ((uint32_t)0x00000020) /*!< Bus Timeout error */
+#define HAL_SMBUS_ERROR_ALERT ((uint32_t)0x00000040) /*!< Alert error */
+#define HAL_SMBUS_ERROR_PECERR ((uint32_t)0x00000080) /*!< PEC error */
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_State SMBUS State
+ * @{
+ */
+
+#define HAL_SMBUS_STATE_RESET ((uint32_t)0x00000000) /*!< SMBUS not yet initialized or disabled */
+#define HAL_SMBUS_STATE_READY ((uint32_t)0x00000001) /*!< SMBUS initialized and ready for use */
+#define HAL_SMBUS_STATE_BUSY ((uint32_t)0x00000002) /*!< SMBUS internal process is ongoing */
+#define HAL_SMBUS_STATE_MASTER_BUSY_TX ((uint32_t)0x00000012) /*!< Master Data Transmission process is ongoing */
+#define HAL_SMBUS_STATE_MASTER_BUSY_RX ((uint32_t)0x00000022) /*!< Master Data Reception process is ongoing */
+#define HAL_SMBUS_STATE_SLAVE_BUSY_TX ((uint32_t)0x00000032) /*!< Slave Data Transmission process is ongoing */
+#define HAL_SMBUS_STATE_SLAVE_BUSY_RX ((uint32_t)0x00000042) /*!< Slave Data Reception process is ongoing */
+#define HAL_SMBUS_STATE_TIMEOUT ((uint32_t)0x00000003) /*!< Timeout state */
+#define HAL_SMBUS_STATE_ERROR ((uint32_t)0x00000004) /*!< Reception process is ongoing */
+#define HAL_SMBUS_STATE_SLAVE_LISTEN ((uint32_t)0x00000008) /*!< Address Listen Mode is ongoing */
+ /* Aliases for inter STM32 series compatibility */
+#define HAL_SMBUS_STATE_LISTEN HAL_SMBUS_STATE_SLAVE_LISTEN
+
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_Analog_Filter SMBUS Analog Filter
+ * @{
+ */
+#define SMBUS_ANALOGFILTER_ENABLED ((uint32_t)0x00000000)
+#define SMBUS_ANALOGFILTER_DISABLED I2C_CR1_ANFOFF
+
+#define IS_SMBUS_ANALOG_FILTER(FILTER) (((FILTER) == SMBUS_ANALOGFILTER_ENABLED) || \
+ ((FILTER) == SMBUS_ANALOGFILTER_DISABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_addressing_mode SMBUS addressing mode
+ * @{
+ */
+#define SMBUS_ADDRESSINGMODE_7BIT ((uint32_t)0x00000001)
+#define SMBUS_ADDRESSINGMODE_10BIT ((uint32_t)0x00000002)
+
+#define IS_SMBUS_ADDRESSING_MODE(MODE) (((MODE) == SMBUS_ADDRESSINGMODE_7BIT) || \
+ ((MODE) == SMBUS_ADDRESSINGMODE_10BIT))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_dual_addressing_mode SMBUS dual addressing mode
+ * @{
+ */
+
+#define SMBUS_DUALADDRESS_DISABLED ((uint32_t)0x00000000)
+#define SMBUS_DUALADDRESS_ENABLED I2C_OAR2_OA2EN
+
+#define IS_SMBUS_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == SMBUS_DUALADDRESS_DISABLED) || \
+ ((ADDRESS) == SMBUS_DUALADDRESS_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_own_address2_masks SMBUS ownaddress2 masks
+ * @{
+ */
+
+#define SMBUS_OA2_NOMASK ((uint8_t)0x00)
+#define SMBUS_OA2_MASK01 ((uint8_t)0x01)
+#define SMBUS_OA2_MASK02 ((uint8_t)0x02)
+#define SMBUS_OA2_MASK03 ((uint8_t)0x03)
+#define SMBUS_OA2_MASK04 ((uint8_t)0x04)
+#define SMBUS_OA2_MASK05 ((uint8_t)0x05)
+#define SMBUS_OA2_MASK06 ((uint8_t)0x06)
+#define SMBUS_OA2_MASK07 ((uint8_t)0x07)
+
+#define IS_SMBUS_OWN_ADDRESS2_MASK(MASK) (((MASK) == SMBUS_OA2_NOMASK) || \
+ ((MASK) == SMBUS_OA2_MASK01) || \
+ ((MASK) == SMBUS_OA2_MASK02) || \
+ ((MASK) == SMBUS_OA2_MASK03) || \
+ ((MASK) == SMBUS_OA2_MASK04) || \
+ ((MASK) == SMBUS_OA2_MASK05) || \
+ ((MASK) == SMBUS_OA2_MASK06) || \
+ ((MASK) == SMBUS_OA2_MASK07))
+/**
+ * @}
+ */
+
+
+/** @defgroup SMBUS_general_call_addressing_mode SMBUS general call addressing mode
+ * @{
+ */
+#define SMBUS_GENERALCALL_DISABLED ((uint32_t)0x00000000)
+#define SMBUS_GENERALCALL_ENABLED I2C_CR1_GCEN
+
+#define IS_SMBUS_GENERAL_CALL(CALL) (((CALL) == SMBUS_GENERALCALL_DISABLED) || \
+ ((CALL) == SMBUS_GENERALCALL_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_nostretch_mode SMBUS nostretch mode
+ * @{
+ */
+#define SMBUS_NOSTRETCH_DISABLED ((uint32_t)0x00000000)
+#define SMBUS_NOSTRETCH_ENABLED I2C_CR1_NOSTRETCH
+
+#define IS_SMBUS_NO_STRETCH(STRETCH) (((STRETCH) == SMBUS_NOSTRETCH_DISABLED) || \
+ ((STRETCH) == SMBUS_NOSTRETCH_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_packet_error_check_mode SMBUS packet error check mode
+ * @{
+ */
+#define SMBUS_PEC_DISABLED ((uint32_t)0x00000000)
+#define SMBUS_PEC_ENABLED I2C_CR1_PECEN
+
+#define IS_SMBUS_PEC(PEC) (((PEC) == SMBUS_PEC_DISABLED) || \
+ ((PEC) == SMBUS_PEC_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_peripheral_mode SMBUS peripheral mode
+ * @{
+ */
+#define SMBUS_PERIPHERAL_MODE_SMBUS_HOST (uint32_t)(I2C_CR1_SMBHEN)
+#define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE (uint32_t)(0x00000000)
+#define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP (uint32_t)(I2C_CR1_SMBDEN)
+
+#define IS_SMBUS_PERIPHERAL_MODE(MODE) (((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_HOST) || \
+ ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE) || \
+ ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_ReloadEndMode_definition SMBUS ReloadEndMode definition
+ * @{
+ */
+
+#define SMBUS_SOFTEND_MODE ((uint32_t)0x00000000)
+#define SMBUS_RELOAD_MODE I2C_CR2_RELOAD
+#define SMBUS_AUTOEND_MODE I2C_CR2_AUTOEND
+#define SMBUS_SENDPEC_MODE I2C_CR2_PECBYTE
+
+#define IS_SMBUS_TRANSFER_MODE(MODE) (((MODE) == SMBUS_RELOAD_MODE) || \
+ ((MODE) == SMBUS_AUTOEND_MODE) || \
+ ((MODE) == SMBUS_SOFTEND_MODE) || \
+ ((MODE) == (SMBUS_RELOAD_MODE | SMBUS_SENDPEC_MODE)) || \
+ ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE)) || \
+ ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_RELOAD_MODE)) || \
+ ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE | SMBUS_RELOAD_MODE )))
+
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_StartStopMode_definition SMBUS StartStopMode definition
+ * @{
+ */
+
+#define SMBUS_NO_STARTSTOP ((uint32_t)0x00000000)
+#define SMBUS_GENERATE_STOP I2C_CR2_STOP
+#define SMBUS_GENERATE_START_READ (uint32_t)(I2C_CR2_START | I2C_CR2_RD_WRN)
+#define SMBUS_GENERATE_START_WRITE I2C_CR2_START
+
+#define IS_SMBUS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == SMBUS_GENERATE_STOP) || \
+ ((REQUEST) == SMBUS_GENERATE_START_READ) || \
+ ((REQUEST) == SMBUS_GENERATE_START_WRITE) || \
+ ((REQUEST) == SMBUS_NO_STARTSTOP))
+
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_XferOptions_definition SMBUS XferOptions definition
+ * @{
+ */
+
+#define SMBUS_FIRST_FRAME ((uint32_t)(SMBUS_SOFTEND_MODE))
+#define SMBUS_NEXT_FRAME ((uint32_t)(SMBUS_RELOAD_MODE | SMBUS_SOFTEND_MODE))
+#define SMBUS_FIRST_AND_LAST_FRAME_NO_PEC SMBUS_AUTOEND_MODE
+#define SMBUS_LAST_FRAME_NO_PEC SMBUS_AUTOEND_MODE
+#define SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE))
+#define SMBUS_LAST_FRAME_WITH_PEC ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE))
+
+#define IS_SMBUS_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == SMBUS_FIRST_FRAME) || \
+ ((REQUEST) == SMBUS_NEXT_FRAME) || \
+ ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_NO_PEC) || \
+ ((REQUEST) == SMBUS_LAST_FRAME_NO_PEC) || \
+ ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC) || \
+ ((REQUEST) == SMBUS_LAST_FRAME_WITH_PEC))
+
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_Interrupt_configuration_definition SMBUS Interrupt configuration definition
+ * @brief SMBUS Interrupt definition
+ * Elements values convention: 0xXXXXXXXX
+ * - XXXXXXXX : Interrupt control mask
+ * @{
+ */
+#define SMBUS_IT_ERRI I2C_CR1_ERRIE
+#define SMBUS_IT_TCI I2C_CR1_TCIE
+#define SMBUS_IT_STOPI I2C_CR1_STOPIE
+#define SMBUS_IT_NACKI I2C_CR1_NACKIE
+#define SMBUS_IT_ADDRI I2C_CR1_ADDRIE
+#define SMBUS_IT_RXI I2C_CR1_RXIE
+#define SMBUS_IT_TXI I2C_CR1_TXIE
+#define SMBUS_IT_TX (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_TXI)
+#define SMBUS_IT_RX (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_NACKI | SMBUS_IT_RXI)
+#define SMBUS_IT_ALERT (SMBUS_IT_ERRI)
+#define SMBUS_IT_ADDR (SMBUS_IT_ADDRI | SMBUS_IT_STOPI | SMBUS_IT_NACKI)
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_Flag_definition SMBUS Flag definition
+ * @brief Flag definition
+ * Elements values convention: 0xXXXXYYYY
+ * - XXXXXXXX : Flag mask
+ * @{
+ */
+
+#define SMBUS_FLAG_TXE I2C_ISR_TXE
+#define SMBUS_FLAG_TXIS I2C_ISR_TXIS
+#define SMBUS_FLAG_RXNE I2C_ISR_RXNE
+#define SMBUS_FLAG_ADDR I2C_ISR_ADDR
+#define SMBUS_FLAG_AF I2C_ISR_NACKF
+#define SMBUS_FLAG_STOPF I2C_ISR_STOPF
+#define SMBUS_FLAG_TC I2C_ISR_TC
+#define SMBUS_FLAG_TCR I2C_ISR_TCR
+#define SMBUS_FLAG_BERR I2C_ISR_BERR
+#define SMBUS_FLAG_ARLO I2C_ISR_ARLO
+#define SMBUS_FLAG_OVR I2C_ISR_OVR
+#define SMBUS_FLAG_PECERR I2C_ISR_PECERR
+#define SMBUS_FLAG_TIMEOUT I2C_ISR_TIMEOUT
+#define SMBUS_FLAG_ALERT I2C_ISR_ALERT
+#define SMBUS_FLAG_BUSY I2C_ISR_BUSY
+#define SMBUS_FLAG_DIR I2C_ISR_DIR
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup SMBUS_Exported_Macros SMBUS Exported Macros
+ * @{
+ */
+
+/** @brief Reset SMBUS handle state
+ * @param __HANDLE__: SMBUS handle.
+ * @retval None
+ */
+#define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMBUS_STATE_RESET)
+
+/** @brief Enable or disable the specified SMBUS interrupts.
+ * @param __HANDLE__: specifies the SMBUS Handle.
+ * This parameter can be SMBUS where x: 1 or 2 to select the SMBUS peripheral.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg SMBUS_IT_ERRI: Errors interrupt enable
+ * @arg SMBUS_IT_TCI: Transfer complete interrupt enable
+ * @arg SMBUS_IT_STOPI: STOP detection interrupt enable
+ * @arg SMBUS_IT_NACKI: NACK received interrupt enable
+ * @arg SMBUS_IT_ADDRI: Address match interrupt enable
+ * @arg SMBUS_IT_RXI: RX interrupt enable
+ * @arg SMBUS_IT_TXI: TX interrupt enable
+ *
+ * @retval None
+ */
+
+#define __HAL_SMBUS_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
+#define __HAL_SMBUS_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
+
+/** @brief Checks if the specified SMBUS interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the SMBUS Handle.
+ * This parameter can be SMBUS where x: 1 or 2 to select the SMBUS peripheral.
+ * @param __INTERRUPT__: specifies the SMBUS interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SMBUS_IT_ERRI: Errors interrupt enable
+ * @arg SMBUS_IT_TCI: Transfer complete interrupt enable
+ * @arg SMBUS_IT_STOPI: STOP detection interrupt enable
+ * @arg SMBUS_IT_NACKI: NACK received interrupt enable
+ * @arg SMBUS_IT_ADDRI: Address match interrupt enable
+ * @arg SMBUS_IT_RXI: RX interrupt enable
+ * @arg SMBUS_IT_TXI: TX interrupt enable
+ *
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SMBUS_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified SMBUS flag is set or not.
+ * @param __HANDLE__: specifies the SMBUS Handle.
+ * This parameter can be SMBUS where x: 1 or 2 to select the SMBUS peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SMBUS_FLAG_TXE: Transmit data register empty
+ * @arg SMBUS_FLAG_TXIS: Transmit interrupt status
+ * @arg SMBUS_FLAG_RXNE: Receive data register not empty
+ * @arg SMBUS_FLAG_ADDR: Address matched (slave mode)
+ * @arg SMBUS_FLAG_AF: NACK received flag
+ * @arg SMBUS_FLAG_STOPF: STOP detection flag
+ * @arg SMBUS_FLAG_TC: Transfer complete (master mode)
+ * @arg SMBUS_FLAG_TCR: Transfer complete reload
+ * @arg SMBUS_FLAG_BERR: Bus error
+ * @arg SMBUS_FLAG_ARLO: Arbitration lost
+ * @arg SMBUS_FLAG_OVR: Overrun/Underrun
+ * @arg SMBUS_FLAG_PECERR: PEC error in reception
+ * @arg SMBUS_FLAG_TIMEOUT: Timeout or Tlow detection flag
+ * @arg SMBUS_FLAG_ALERT: SMBus alert
+ * @arg SMBUS_FLAG_BUSY: Bus busy
+ * @arg SMBUS_FLAG_DIR: Transfer direction (slave mode)
+ *
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define SMBUS_FLAG_MASK ((uint32_t)0x0001FFFF)
+#define __HAL_SMBUS_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__) & SMBUS_FLAG_MASK)) == ((__FLAG__) & SMBUS_FLAG_MASK)))
+
+/** @brief Clears the SMBUS pending flags which are cleared by writing 1 in a specific bit.
+ * @param __HANDLE__: specifies the SMBUS Handle.
+ * This parameter can be SMBUS where x: 1 or 2 to select the SMBUS peripheral.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg SMBUS_FLAG_ADDR: Address matched (slave mode)
+ * @arg SMBUS_FLAG_AF: NACK received flag
+ * @arg SMBUS_FLAG_STOPF: STOP detection flag
+ * @arg SMBUS_FLAG_BERR: Bus error
+ * @arg SMBUS_FLAG_ARLO: Arbitration lost
+ * @arg SMBUS_FLAG_OVR: Overrun/Underrun
+ * @arg SMBUS_FLAG_PECERR: PEC error in reception
+ * @arg SMBUS_FLAG_TIMEOUT: Timeout or Tlow detection flag
+ * @arg SMBUS_FLAG_ALERT: SMBus alert
+ *
+ * @retval None
+ */
+#define __HAL_SMBUS_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+
+#define __HAL_SMBUS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= I2C_CR1_PE)
+#define __HAL_SMBUS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~I2C_CR1_PE)
+
+#define __HAL_SMBUS_RESET_CR1(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (uint32_t)~((uint32_t)(I2C_CR1_SMBHEN | I2C_CR1_SMBDEN | I2C_CR1_PECEN)))
+#define __HAL_SMBUS_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
+
+#define __HAL_SMBUS_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == SMBUS_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
+ (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
+
+#define __HAL_SMBUS_GET_ADDR_MATCH(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 17)
+#define __HAL_SMBUS_GET_DIR(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16)
+#define __HAL_SMBUS_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND)
+#define __HAL_SMBUS_GET_PEC_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_PECBYTE)
+#define __HAL_SMBUS_GET_ALERT_ENABLED(__HANDLE__) ((__HANDLE__)->Instance->CR1 & I2C_CR1_ALERTEN)
+#define __HAL_SMBUS_GENERATE_NACK(__HANDLE__) ((__HANDLE__)->Instance->CR2 |= I2C_CR2_NACK)
+
+#define IS_SMBUS_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= (uint32_t)0x000003FF)
+#define IS_SMBUS_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FF)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SMBUS_Exported_Functions SMBUS Exported Functions
+ * @{
+ */
+
+/** @addtogroup SMBUS_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SMBUS_Init(SMBUS_HandleTypeDef *hsmbus);
+HAL_StatusTypeDef HAL_SMBUS_DeInit (SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_MspInit(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_MspDeInit(SMBUS_HandleTypeDef *hsmbus);
+
+/**
+ * @}
+ */
+
+/** @addtogroup SMBUS_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+/******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_SMBUS_IsDeviceReady(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+
+/******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_SMBUS_Master_Abort_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress);
+HAL_StatusTypeDef HAL_SMBUS_Slave_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_SMBUS_Slave_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+
+HAL_StatusTypeDef HAL_SMBUS_EnableAlert_IT(SMBUS_HandleTypeDef *hsmbus);
+HAL_StatusTypeDef HAL_SMBUS_DisableAlert_IT(SMBUS_HandleTypeDef *hsmbus);
+HAL_StatusTypeDef HAL_SMBUS_Slave_Listen_IT(SMBUS_HandleTypeDef *hsmbus);
+HAL_StatusTypeDef HAL_SMBUS_DisableListen_IT(SMBUS_HandleTypeDef *hsmbus);
+
+/* Aliases for new API and to insure inter STM32 series compatibility */
+#define HAL_SMBUS_EnableListen_IT HAL_SMBUS_Slave_Listen_IT
+
+/******* SMBUS IRQHandler and Callbacks used in non blocking modes (Interrupt) */
+void HAL_SMBUS_EV_IRQHandler(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_ER_IRQHandler(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_MasterTxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_MasterRxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_SlaveTxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_SlaveRxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_SlaveAddrCallback(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode);
+void HAL_SMBUS_SlaveListenCpltCallback(SMBUS_HandleTypeDef *hsmbus);
+
+/* Aliases for new API and to insure inter STM32 series compatibility */
+#define HAL_SMBUS_AddrCallback HAL_SMBUS_SlaveAddrCallback
+#define HAL_SMBUS_ListenCpltCallback HAL_SMBUS_SlaveListenCpltCallback
+
+void HAL_SMBUS_ErrorCallback(SMBUS_HandleTypeDef *hsmbus);
+
+/**
+ * @}
+ */
+
+/** @addtogroup SMBUS_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @{
+ */
+
+/* Peripheral State and Errors functions **************************************************/
+uint32_t HAL_SMBUS_GetState(SMBUS_HandleTypeDef *hsmbus);
+uint32_t HAL_SMBUS_GetError(SMBUS_HandleTypeDef *hsmbus);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F0xx_HAL_SMBUS_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_spi.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,677 @@
+ /**
+ ******************************************************************************
+ * @file stm32f0xx_hal_spi.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of SPI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_SPI_H
+#define __STM32F0xx_HAL_SPI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SPI
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SPI_Exported_Types SPI Exported Types
+ * @{
+ */
+
+/**
+ * @brief SPI Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Specifies the SPI operating mode.
+ This parameter can be a value of @ref SPI_mode */
+
+ uint32_t Direction; /*!< Specifies the SPI bidirectional mode state.
+ This parameter can be a value of @ref SPI_Direction */
+
+ uint32_t DataSize; /*!< Specifies the SPI data size.
+ This parameter can be a value of @ref SPI_data_size */
+
+ uint32_t CLKPolarity; /*!< Specifies the serial clock steady state.
+ This parameter can be a value of @ref SPI_Clock_Polarity */
+
+ uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture.
+ This parameter can be a value of @ref SPI_Clock_Phase */
+
+ uint32_t NSS; /*!< Specifies whether the NSS signal is managed by
+ hardware (NSS pin) or by software using the SSI bit.
+ This parameter can be a value of @ref SPI_Slave_Select_management */
+
+ uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be
+ used to configure the transmit and receive SCK clock.
+ This parameter can be a value of @ref SPI_BaudRate_Prescaler
+ @note The communication clock is derived from the master
+ clock. The slave clock does not need to be set. */
+
+ uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
+ This parameter can be a value of @ref SPI_MSB_LSB_transmission */
+
+ uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not .
+ This parameter can be a value of @ref SPI_TI_mode */
+
+ uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not.
+ This parameter can be a value of @ref SPI_CRC_Calculation */
+
+ uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 65535 */
+
+ uint32_t CRCLength; /*!< Specifies the CRC Length used for the CRC calculation.
+ CRC Length is only used with Data8 and Data16, not other data size
+ This parameter must 0 or 1 or 2*/
+
+ uint32_t NSSPMode; /*!< Specifies whether the NSSP signal is enabled or not .
+ This parameter can be a value of @ref SPI_NSSP_Mode
+ This mode is activated by the NSSP bit in the SPIx_CR2 register and
+ it takes effect only if the SPI interface is configured as Motorola SPI
+ master (FRF=0) with capture on the first edge (SPIx_CR1 CPHA = 0,
+ CPOL setting is ignored).. */
+} SPI_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_SPI_STATE_RESET = 0x00, /*!< Peripheral not Initialized */
+ HAL_SPI_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_SPI_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_SPI_STATE_BUSY_TX = 0x03, /*!< Data Transmission process is ongoing */
+ HAL_SPI_STATE_BUSY_RX = 0x04, /*!< Data Reception process is ongoing */
+ HAL_SPI_STATE_BUSY_TX_RX = 0x05, /*!< Data Transmission and Reception process is ongoing */
+ HAL_SPI_STATE_ERROR = 0x06 /*!< SPI error state */
+}HAL_SPI_StateTypeDef;
+
+/**
+ * @brief SPI handle Structure definition
+ */
+typedef struct __SPI_HandleTypeDef
+{
+ SPI_TypeDef *Instance; /*!< SPI registers base address */
+
+ SPI_InitTypeDef Init; /*!< SPI communication parameters */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to SPI Tx transfer Buffer */
+
+ uint16_t TxXferSize; /*!< SPI Tx Transfer size */
+
+ uint16_t TxXferCount; /*!< SPI Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /*!< Pointer to SPI Rx transfer Buffer */
+
+ uint16_t RxXferSize; /*!< SPI Rx Transfer size */
+
+ uint16_t RxXferCount; /*!< SPI Rx Transfer Counter */
+
+ uint32_t CRCSize; /*!< SPI CRC size used for the transfer */
+
+ void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Rx IRQ handler */
+
+ void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Tx IRQ handler */
+
+ DMA_HandleTypeDef *hdmatx; /*!< SPI Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< SPI Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ HAL_SPI_StateTypeDef State; /*!< SPI communication state */
+
+ __IO uint32_t ErrorCode; /*!< SPI Error code
+ This parameter can be a value of @ref SPI_Error */
+
+}SPI_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup SPI_Exported_Constants SPI Exported Constants
+ * @{
+ */
+
+/** @defgroup SPI_Error SPI Error
+ * @{
+ */
+ #define HAL_SPI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+ #define HAL_SPI_ERROR_MODF ((uint32_t)0x00000001) /*!< MODF error */
+ #define HAL_SPI_ERROR_CRC ((uint32_t)0x00000002) /*!< CRC error */
+ #define HAL_SPI_ERROR_OVR ((uint32_t)0x00000004) /*!< OVR error */
+ #define HAL_SPI_ERROR_FRE ((uint32_t)0x00000008) /*!< FRE error */
+ #define HAL_SPI_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+ #define HAL_SPI_ERROR_FLAG ((uint32_t)0x00000020) /*!< Error on BSY/TXE/FTLVL/FRLVL Flag */
+ #define HAL_SPI_ERROR_UNKNOW ((uint32_t)0x00000040) /*!< Unknow Error error */
+/**
+ * @}
+ */
+
+/** @defgroup SPI_mode SPI mode
+ * @{
+ */
+#define SPI_MODE_SLAVE ((uint32_t)0x00000000)
+#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI)
+#define IS_SPI_MODE(MODE) (((MODE) == SPI_MODE_SLAVE) || \
+ ((MODE) == SPI_MODE_MASTER))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Direction SPI Direction
+ * @{
+ */
+#define SPI_DIRECTION_2LINES ((uint32_t)0x00000000)
+#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY
+#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE
+
+#define IS_SPI_DIRECTION(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \
+ ((MODE) == SPI_DIRECTION_2LINES_RXONLY) ||\
+ ((MODE) == SPI_DIRECTION_1LINE))
+
+#define IS_SPI_DIRECTION_2LINES(MODE) ((MODE) == SPI_DIRECTION_2LINES)
+
+#define IS_SPI_DIRECTION_2LINES_OR_1LINE(MODE) (((MODE) == SPI_DIRECTION_2LINES)|| \
+ ((MODE) == SPI_DIRECTION_1LINE))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_data_size SPI Data size
+ * @{
+ */
+#define SPI_DATASIZE_4BIT ((uint32_t)0x0300) /*!< SPI Datasize = 4bits */
+#define SPI_DATASIZE_5BIT ((uint32_t)0x0400) /*!< SPI Datasize = 5bits */
+#define SPI_DATASIZE_6BIT ((uint32_t)0x0500) /*!< SPI Datasize = 6bits */
+#define SPI_DATASIZE_7BIT ((uint32_t)0x0600) /*!< SPI Datasize = 7bits */
+#define SPI_DATASIZE_8BIT ((uint32_t)0x0700) /*!< SPI Datasize = 8bits */
+#define SPI_DATASIZE_9BIT ((uint32_t)0x0800) /*!< SPI Datasize = 9bits */
+#define SPI_DATASIZE_10BIT ((uint32_t)0x0900) /*!< SPI Datasize = 10bits */
+#define SPI_DATASIZE_11BIT ((uint32_t)0x0A00) /*!< SPI Datasize = 11bits */
+#define SPI_DATASIZE_12BIT ((uint32_t)0x0B00) /*!< SPI Datasize = 12bits */
+#define SPI_DATASIZE_13BIT ((uint32_t)0x0C00) /*!< SPI Datasize = 13bits */
+#define SPI_DATASIZE_14BIT ((uint32_t)0x0D00) /*!< SPI Datasize = 14bits */
+#define SPI_DATASIZE_15BIT ((uint32_t)0x0E00) /*!< SPI Datasize = 15bits */
+#define SPI_DATASIZE_16BIT ((uint32_t)0x0F00) /*!< SPI Datasize = 16bits */
+#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DATASIZE_16BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_15BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_14BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_13BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_12BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_11BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_10BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_9BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_8BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_7BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_6BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_5BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_4BIT))
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Polarity SPI Clock Polarity
+ * @{
+ */
+#define SPI_POLARITY_LOW ((uint32_t)0x00000000) /*!< SPI polarity Low */
+#define SPI_POLARITY_HIGH SPI_CR1_CPOL /*!< SPI polarity High */
+#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_POLARITY_LOW) || \
+ ((CPOL) == SPI_POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Phase SPI Clock Phase
+ * @{
+ */
+#define SPI_PHASE_1EDGE ((uint32_t)0x00000000) /*!< SPI Phase 1EDGE */
+#define SPI_PHASE_2EDGE SPI_CR1_CPHA /*!< SPI Phase 2EDGE */
+#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_PHASE_1EDGE) || \
+ ((CPHA) == SPI_PHASE_2EDGE))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Slave_Select_management SPI Slave Select management
+ * @{
+ */
+#define SPI_NSS_SOFT SPI_CR1_SSM
+#define SPI_NSS_HARD_INPUT ((uint32_t)0x00000000)
+#define SPI_NSS_HARD_OUTPUT ((uint32_t)0x00040000)
+#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_SOFT) || \
+ ((NSS) == SPI_NSS_HARD_INPUT) || \
+ ((NSS) == SPI_NSS_HARD_OUTPUT))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_NSSP_Mode SPI NSS pulse management
+ * @{
+ */
+#define SPI_NSS_PULSE_ENABLED SPI_CR2_NSSP
+#define SPI_NSS_PULSE_DISABLED ((uint32_t)0x00000000)
+
+#define IS_SPI_NSSP(NSSP) (((NSSP) == SPI_NSS_PULSE_ENABLED) || \
+ ((NSSP) == SPI_NSS_PULSE_DISABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler
+ * @{
+ */
+#define SPI_BAUDRATEPRESCALER_2 ((uint32_t)0x00000000)
+#define SPI_BAUDRATEPRESCALER_4 ((uint32_t)0x00000008)
+#define SPI_BAUDRATEPRESCALER_8 ((uint32_t)0x00000010)
+#define SPI_BAUDRATEPRESCALER_16 ((uint32_t)0x00000018)
+#define SPI_BAUDRATEPRESCALER_32 ((uint32_t)0x00000020)
+#define SPI_BAUDRATEPRESCALER_64 ((uint32_t)0x00000028)
+#define SPI_BAUDRATEPRESCALER_128 ((uint32_t)0x00000030)
+#define SPI_BAUDRATEPRESCALER_256 ((uint32_t)0x00000038)
+#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BAUDRATEPRESCALER_2) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_4) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_8) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_16) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_32) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_64) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_128) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_256))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB transmission
+ * @{
+ */
+#define SPI_FIRSTBIT_MSB ((uint32_t)0x00000000)
+#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST
+#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FIRSTBIT_MSB) || \
+ ((BIT) == SPI_FIRSTBIT_LSB))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_TI_mode SPI TI mode
+ * @{
+ */
+#define SPI_TIMODE_DISABLED ((uint32_t)0x00000000)
+#define SPI_TIMODE_ENABLED SPI_CR2_FRF
+#define IS_SPI_TIMODE(MODE) (((MODE) == SPI_TIMODE_DISABLED) || \
+ ((MODE) == SPI_TIMODE_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_CRC_Calculation SPI CRC Calculation
+ * @{
+ */
+#define SPI_CRCCALCULATION_DISABLED ((uint32_t)0x00000000)
+#define SPI_CRCCALCULATION_ENABLED SPI_CR1_CRCEN
+#define IS_SPI_CRC_CALCULATION(CALCULATION) (((CALCULATION) == SPI_CRCCALCULATION_DISABLED) || \
+ ((CALCULATION) == SPI_CRCCALCULATION_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_CRC_length SPI CRC length
+ * @{
+ * This parameter can be one of the following values:
+ * SPI_CRC_LENGTH_DATASIZE: aligned with the data size
+ * SPI_CRC_LENGTH_8BIT : CRC 8bit
+ * SPI_CRC_LENGTH_16BIT : CRC 16bit
+ */
+#define SPI_CRC_LENGTH_DATASIZE 0
+#define SPI_CRC_LENGTH_8BIT 1
+#define SPI_CRC_LENGTH_16BIT 2
+#define IS_SPI_CRC_LENGTH(LENGTH) (((LENGTH) == SPI_CRC_LENGTH_DATASIZE) ||\
+ ((LENGTH) == SPI_CRC_LENGTH_8BIT) || \
+ ((LENGTH) == SPI_CRC_LENGTH_16BIT))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_FIFO_reception_threshold SPI FIFO reception threshold
+ * @{
+ * This parameter can be one of the following values:
+ * SPI_RXFIFO_THRESHOLD or SPI_RXFIFO_THRESHOLD_QF :
+ * RXNE event is generated if the FIFO
+ * level is greater or equal to 1/2(16-bits).
+ * SPI_RXFIFO_THRESHOLD_HF: RXNE event is generated if the FIFO
+ * level is greater or equal to 1/4(8 bits). */
+#define SPI_RXFIFO_THRESHOLD SPI_CR2_FRXTH
+#define SPI_RXFIFO_THRESHOLD_QF SPI_CR2_FRXTH
+#define SPI_RXFIFO_THRESHOLD_HF ((uint32_t)0x0)
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Interrupt_configuration_definition SPI Interrupt configuration definition
+ * @brief SPI Interrupt definition
+ * Elements values convention: 0xXXXXXXXX
+ * - XXXXXXXX : Interrupt control mask
+ * @{
+ */
+#define SPI_IT_TXE SPI_CR2_TXEIE
+#define SPI_IT_RXNE SPI_CR2_RXNEIE
+#define SPI_IT_ERR SPI_CR2_ERRIE
+/**
+ * @}
+ */
+
+
+/** @defgroup SPI_Flag_definition SPI Flag definition
+ * @brief Flag definition
+ * Elements values convention: 0xXXXXYYYY
+ * - XXXX : Flag register Index
+ * - YYYY : Flag mask
+ * @{
+ */
+#define SPI_FLAG_RXNE SPI_SR_RXNE /* SPI status flag: Rx buffer not empty flag */
+#define SPI_FLAG_TXE SPI_SR_TXE /* SPI status flag: Tx buffer empty flag */
+#define SPI_FLAG_BSY SPI_SR_BSY /* SPI status flag: Busy flag */
+#define SPI_FLAG_CRCERR SPI_SR_CRCERR /* SPI Error flag: CRC error flag */
+#define SPI_FLAG_MODF SPI_SR_MODF /* SPI Error flag: Mode fault flag */
+#define SPI_FLAG_OVR SPI_SR_OVR /* SPI Error flag: Overrun flag */
+#define SPI_FLAG_FRE SPI_SR_FRE /* SPI Error flag: TI mode frame format error flag */
+#define SPI_FLAG_FTLVL SPI_SR_FTLVL /* SPI fifo transmission level */
+#define SPI_FLAG_FRLVL SPI_SR_FRLVL /* SPI fifo reception level */
+/**
+ * @}
+ */
+
+/** @defgroup SPI_transmission_fifo_status_level SPI transmission fifo status level
+ * @{
+ */
+#define SPI_FTLVL_EMPTY ((uint32_t)0x0000)
+#define SPI_FTLVL_QUARTER_FULL ((uint32_t)0x0800)
+#define SPI_FTLVL_HALF_FULL ((uint32_t)0x1000)
+#define SPI_FTLVL_FULL ((uint32_t)0x1800)
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_reception_fifo_status_level SPI reception fifo status level
+ * @{
+ */
+#define SPI_FRLVL_EMPTY ((uint32_t)0x0000)
+#define SPI_FRLVL_QUARTER_FULL ((uint32_t)0x0200)
+#define SPI_FRLVL_HALF_FULL ((uint32_t)0x0400)
+#define SPI_FRLVL_FULL ((uint32_t)0x0600)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup SPI_Exported_Macros SPI Exported Macros
+ * @{
+ */
+
+/** @brief Reset SPI handle state
+ * @param __HANDLE__: SPI handle.
+ * @retval None
+ */
+#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
+
+/** @brief Enables or disables the specified SPI interrupts.
+ * @param __HANDLE__ : specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __INTERRUPT__ : specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__)))
+
+/** @brief Checks if the specified SPI interrupt source is enabled or disabled.
+ * @param __HANDLE__ : specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __INTERRUPT__ : specifies the SPI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified SPI flag is set or not.
+ * @param __HANDLE__ : specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __FLAG__ : specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_FLAG_RXNE: Receive buffer not empty flag
+ * @arg SPI_FLAG_TXE: Transmit buffer empty flag
+ * @arg SPI_FLAG_CRCERR: CRC error flag
+ * @arg SPI_FLAG_MODF: Mode fault flag
+ * @arg SPI_FLAG_OVR: Overrun flag
+ * @arg SPI_FLAG_BSY: Busy flag
+ * @arg SPI_FLAG_FRE: Frame format error flag
+ * @arg SPI_FLAG_FTLVL: SPI fifo transmission level
+ * @arg SPI_FLAG_FRLVL: SPI fifo reception level
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the SPI CRCERR pending flag.
+ * @param __HANDLE__ : specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR))
+
+/** @brief Clears the SPI MODF pending flag.
+ * @param __HANDLE__ : specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ *
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) do{\
+ __IO uint32_t tmpreg;\
+ tmpreg = (__HANDLE__)->Instance->SR;\
+ UNUSED(tmpreg); \
+ (__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE);\
+ }while(0)
+
+/** @brief Clears the SPI OVR pending flag.
+ * @param __HANDLE__ : specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ *
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) do{ \
+ __IO uint32_t tmpreg; \
+ tmpreg = (__HANDLE__)->Instance->DR; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg); \
+ } while(0)
+
+/** @brief Clears the SPI FRE pending flag.
+ * @param __HANDLE__ : specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ *
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) do{\
+ __IO uint32_t tmpreg;\
+ tmpreg = ((__HANDLE__)->Instance->SR);\
+ UNUSED(tmpreg); \
+ }while(0)
+/** @brief Enables the SPI.
+ * @param __HANDLE__ : specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_SPE)
+
+/** @brief Disables the SPI.
+ * @param __HANDLE__ : specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE))
+
+/** @brief Sets the SPI transmit-only mode.
+ * @param __HANDLE__ : specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_1LINE_TX(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_BIDIOE)
+
+/** @brief Sets the SPI receive-only mode.
+ * @param __HANDLE__ : specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_1LINE_RX(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (~SPI_CR1_BIDIOE))
+
+/** @brief Resets the CRC calculation of the SPI.
+ * @param __HANDLE__ : specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_RESET_CRC(__HANDLE__) do{(__HANDLE__)->Instance->CR1 &= (uint16_t)(~SPI_CR1_CRCEN);\
+ (__HANDLE__)->Instance->CR1 |= SPI_CR1_CRCEN;}while(0)
+
+
+#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) (((POLYNOMIAL) >= 0x1) && ((POLYNOMIAL) <= 0xFFFF))
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SPI_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup SPI_Exported_Functions_Group1
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_InitExtended(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DeInit (SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi);
+/**
+ * @}
+ */
+
+/** @addtogroup SPI_Exported_Functions_Group2
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_FlushRxFifo(SPI_HandleTypeDef *hspi);
+
+void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
+/**
+ * @}
+ */
+
+/** @addtogroup SPI_Exported_Functions_Group3
+ * @{
+ */
+
+/* Peripheral State and Error functions ***************************************/
+HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi);
+uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_SPI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_tim.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1645 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_tim.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of TIM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_TIM_H
+#define __STM32F0xx_HAL_TIM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TIM
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIM_Exported_Types TIM Exported Types
+ * @{
+ */
+
+/**
+ * @brief TIM Time base Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t CounterMode; /*!< Specifies the counter mode.
+ This parameter can be a value of @ref TIM_Counter_Mode */
+
+ uint32_t Period; /*!< Specifies the period value to be loaded into the active
+ Auto-Reload Register at the next update event.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t ClockDivision; /*!< Specifies the clock division.
+ This parameter can be a value of @ref TIM_ClockDivision */
+
+ uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter
+ reaches zero, an update event is generated and counting restarts
+ from the RCR value (N).
+ This means in PWM mode that (N+1) corresponds to:
+ - the number of PWM periods in edge-aligned mode
+ - the number of half PWM period in center-aligned mode
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_Base_InitTypeDef;
+
+/**
+ * @brief TIM Output Compare Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCFastMode; /*!< Specifies the Fast mode state.
+ This parameter can be a value of @ref TIM_Output_Fast_State
+ @note This parameter is valid only in PWM1 and PWM2 mode. */
+
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_OC_InitTypeDef;
+
+/**
+ * @brief TIM One Pulse Mode Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_OnePulse_InitTypeDef;
+
+
+/**
+ * @brief TIM Input Capture Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_IC_InitTypeDef;
+
+/**
+ * @brief TIM Encoder Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t EncoderMode; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Encoder_Mode */
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+ uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC2Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC2Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_Encoder_InitTypeDef;
+
+
+/**
+ * @brief Clock Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockSource; /*!< TIM clock sources
+ This parameter can be a value of @ref TIM_Clock_Source */
+ uint32_t ClockPolarity; /*!< TIM clock polarity
+ This parameter can be a value of @ref TIM_Clock_Polarity */
+ uint32_t ClockPrescaler; /*!< TIM clock prescaler
+ This parameter can be a value of @ref TIM_Clock_Prescaler */
+ uint32_t ClockFilter; /*!< TIM clock filter
+ This parameter can be a value of @ref TIM_Clock_Filter */
+}TIM_ClockConfigTypeDef;
+
+/**
+ * @brief Clear Input Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClearInputState; /*!< TIM clear Input state
+ This parameter can be ENABLE or DISABLE */
+ uint32_t ClearInputSource; /*!< TIM clear Input sources
+ This parameter can be a value of @ref TIM_ClearInput_Source */
+ uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity
+ This parameter can be a value of @ref TIM_ClearInput_Polarity */
+ uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler
+ This parameter can be a value of @ref TIM_ClearInput_Prescaler */
+ uint32_t ClearInputFilter; /*!< TIM Clear Input filter
+ This parameter can be a value of @ref TIM_ClearInput_Filter */
+}TIM_ClearInputConfigTypeDef;
+
+/**
+ * @brief TIM Slave configuration Structure definition
+ */
+typedef struct {
+ uint32_t SlaveMode; /*!< Slave mode selection
+ This parameter can be a value of @ref TIM_Slave_Mode */
+ uint32_t InputTrigger; /*!< Input Trigger source
+ This parameter can be a value of @ref TIM_Trigger_Selection */
+ uint32_t TriggerPolarity; /*!< Input Trigger polarity
+ This parameter can be a value of @ref TIM_Trigger_Polarity */
+ uint32_t TriggerPrescaler; /*!< Input trigger prescaler
+ This parameter can be a value of @ref TIM_Trigger_Prescaler */
+ uint32_t TriggerFilter; /*!< Input trigger filter
+ This parameter can be a value of @ref TIM_Trigger_Filter */
+
+}TIM_SlaveConfigTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_TIM_STATE_RESET = 0x00, /*!< Peripheral not yet initialized or disabled */
+ HAL_TIM_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_TIM_STATE_BUSY = 0x02, /*!< An internal process is ongoing */
+ HAL_TIM_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_TIM_STATE_ERROR = 0x04 /*!< Reception process is ongoing */
+}HAL_TIM_StateTypeDef;
+
+/**
+ * @brief HAL Active channel structures definition
+ */
+typedef enum
+{
+ HAL_TIM_ACTIVE_CHANNEL_1 = 0x01, /*!< The active channel is 1 */
+ HAL_TIM_ACTIVE_CHANNEL_2 = 0x02, /*!< The active channel is 2 */
+ HAL_TIM_ACTIVE_CHANNEL_3 = 0x04, /*!< The active channel is 3 */
+ HAL_TIM_ACTIVE_CHANNEL_4 = 0x08, /*!< The active channel is 4 */
+ HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00 /*!< All active channels cleared */
+}HAL_TIM_ActiveChannel;
+
+/**
+ * @brief TIM Time Base Handle Structure definition
+ */
+typedef struct
+{
+ TIM_TypeDef *Instance; /*!< Register base address */
+ TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */
+ HAL_TIM_ActiveChannel Channel; /*!< Active channel */
+ DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array
+ This array is accessed by a @ref TIM_DMA_Handle_index */
+ HAL_LockTypeDef Lock; /*!< Locking object */
+ __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */
+}TIM_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIM_Exported_Constants TIM Exported Constants
+ * @{
+ */
+
+/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel polarity
+ * @{
+ */
+#define TIM_INPUTCHANNELPOLARITY_RISING ((uint32_t)0x00000000) /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_FALLING (TIM_CCER_CC1P) /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Polarity TIM ETR Polarity
+ * @{
+ */
+#define TIM_ETRPOLARITY_INVERTED (TIM_SMCR_ETP) /*!< Polarity for ETR source */
+#define TIM_ETRPOLARITY_NONINVERTED ((uint32_t)0x0000) /*!< Polarity for ETR source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler
+ * @{
+ */
+#define TIM_ETRPRESCALER_DIV1 ((uint32_t)0x0000) /*!< No prescaler is used */
+#define TIM_ETRPRESCALER_DIV2 (TIM_SMCR_ETPS_0) /*!< ETR input source is divided by 2 */
+#define TIM_ETRPRESCALER_DIV4 (TIM_SMCR_ETPS_1) /*!< ETR input source is divided by 4 */
+#define TIM_ETRPRESCALER_DIV8 (TIM_SMCR_ETPS) /*!< ETR input source is divided by 8 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Counter_Mode TIM Counter Mode
+ * @{
+ */
+
+#define TIM_COUNTERMODE_UP ((uint32_t)0x0000)
+#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR
+#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0
+#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1
+#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS
+
+#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_COUNTERMODE_UP) || \
+ ((MODE) == TIM_COUNTERMODE_DOWN) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED1) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED2) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED3))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClockDivision TIM Clock Division
+ * @{
+ */
+
+#define TIM_CLOCKDIVISION_DIV1 ((uint32_t)0x0000)
+#define TIM_CLOCKDIVISION_DIV2 (TIM_CR1_CKD_0)
+#define TIM_CLOCKDIVISION_DIV4 (TIM_CR1_CKD_1)
+
+#define IS_TIM_CLOCKDIVISION_DIV(DIV) (((DIV) == TIM_CLOCKDIVISION_DIV1) || \
+ ((DIV) == TIM_CLOCKDIVISION_DIV2) || \
+ ((DIV) == TIM_CLOCKDIVISION_DIV4))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare & PWM modes
+ * @{
+ */
+
+#define TIM_OCMODE_TIMING ((uint32_t)0x0000)
+#define TIM_OCMODE_ACTIVE (TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_INACTIVE (TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M)
+#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_FORCED_INACTIVE (TIM_CCMR1_OC1M_2)
+
+#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \
+ ((MODE) == TIM_OCMODE_PWM2))
+
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING) || \
+ ((MODE) == TIM_OCMODE_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_INACTIVE) || \
+ ((MODE) == TIM_OCMODE_TOGGLE) || \
+ ((MODE) == TIM_OCMODE_FORCED_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_FORCED_INACTIVE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_State TIM Output Compare State
+ * @{
+ */
+
+#define TIM_OUTPUTSTATE_DISABLE ((uint32_t)0x0000)
+#define TIM_OUTPUTSTATE_ENABLE (TIM_CCER_CC1E)
+
+#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OUTPUTSTATE_DISABLE) || \
+ ((STATE) == TIM_OUTPUTSTATE_ENABLE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Output_Fast_State TIM Output Fast State
+ * @{
+ */
+#define TIM_OCFAST_DISABLE ((uint32_t)0x0000)
+#define TIM_OCFAST_ENABLE (TIM_CCMR1_OC1FE)
+
+#define IS_TIM_FAST_STATE(STATE) (((STATE) == TIM_OCFAST_DISABLE) || \
+ ((STATE) == TIM_OCFAST_ENABLE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State
+ * @{
+ */
+
+#define TIM_OUTPUTNSTATE_DISABLE ((uint32_t)0x0000)
+#define TIM_OUTPUTNSTATE_ENABLE (TIM_CCER_CC1NE)
+
+#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OUTPUTNSTATE_DISABLE) || \
+ ((STATE) == TIM_OUTPUTNSTATE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity
+ * @{
+ */
+
+#define TIM_OCPOLARITY_HIGH ((uint32_t)0x0000)
+#define TIM_OCPOLARITY_LOW (TIM_CCER_CC1P)
+
+#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPOLARITY_HIGH) || \
+ ((POLARITY) == TIM_OCPOLARITY_LOW))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity
+ * @{
+ */
+
+#define TIM_OCNPOLARITY_HIGH ((uint32_t)0x0000)
+#define TIM_OCNPOLARITY_LOW (TIM_CCER_CC1NP)
+
+#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPOLARITY_HIGH) || \
+ ((POLARITY) == TIM_OCNPOLARITY_LOW))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State
+ * @{
+ */
+
+#define TIM_OCIDLESTATE_SET (TIM_CR2_OIS1)
+#define TIM_OCIDLESTATE_RESET ((uint32_t)0x0000)
+#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIDLESTATE_SET) || \
+ ((STATE) == TIM_OCIDLESTATE_RESET))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State
+ * @{
+ */
+
+#define TIM_OCNIDLESTATE_SET (TIM_CR2_OIS1N)
+#define TIM_OCNIDLESTATE_RESET ((uint32_t)0x0000)
+#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIDLESTATE_SET) || \
+ ((STATE) == TIM_OCNIDLESTATE_RESET))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Channel TIM Channel
+ * @{
+ */
+#define TIM_CHANNEL_1 ((uint32_t)0x0000)
+#define TIM_CHANNEL_2 ((uint32_t)0x0004)
+#define TIM_CHANNEL_3 ((uint32_t)0x0008)
+#define TIM_CHANNEL_4 ((uint32_t)0x000C)
+#define TIM_CHANNEL_ALL ((uint32_t)0x0018)
+
+#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4) || \
+ ((CHANNEL) == TIM_CHANNEL_ALL))
+
+#define IS_TIM_PWMI_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity
+ * @{
+ */
+
+#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING
+#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING
+#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE
+
+#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPOLARITY_RISING) || \
+ ((POLARITY) == TIM_ICPOLARITY_FALLING) || \
+ ((POLARITY) == TIM_ICPOLARITY_BOTHEDGE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection
+ * @{
+ */
+
+#define TIM_ICSELECTION_DIRECTTI (TIM_CCMR1_CC1S_0) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC1, IC2, IC3 or IC4, respectively */
+#define TIM_ICSELECTION_INDIRECTTI (TIM_CCMR1_CC1S_1) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC2, IC1, IC4 or IC3, respectively */
+#define TIM_ICSELECTION_TRC (TIM_CCMR1_CC1S) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */
+
+#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSELECTION_DIRECTTI) || \
+ ((SELECTION) == TIM_ICSELECTION_INDIRECTTI) || \
+ ((SELECTION) == TIM_ICSELECTION_TRC))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler
+ * @{
+ */
+
+#define TIM_ICPSC_DIV1 ((uint32_t)0x0000) /*!< Capture performed each time an edge is detected on the capture input */
+#define TIM_ICPSC_DIV2 (TIM_CCMR1_IC1PSC_0) /*!< Capture performed once every 2 events */
+#define TIM_ICPSC_DIV4 (TIM_CCMR1_IC1PSC_1) /*!< Capture performed once every 4 events */
+#define TIM_ICPSC_DIV8 (TIM_CCMR1_IC1PSC) /*!< Capture performed once every 8 events */
+
+#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \
+ ((PRESCALER) == TIM_ICPSC_DIV2) || \
+ ((PRESCALER) == TIM_ICPSC_DIV4) || \
+ ((PRESCALER) == TIM_ICPSC_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode
+ * @{
+ */
+
+#define TIM_OPMODE_SINGLE (TIM_CR1_OPM)
+#define TIM_OPMODE_REPETITIVE ((uint32_t)0x0000)
+
+#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMODE_SINGLE) || \
+ ((MODE) == TIM_OPMODE_REPETITIVE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Encoder_Mode TIM Encoder Mode
+ * @{
+ */
+#define TIM_ENCODERMODE_TI1 (TIM_SMCR_SMS_0)
+#define TIM_ENCODERMODE_TI2 (TIM_SMCR_SMS_1)
+#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0)
+
+#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_ENCODERMODE_TI1) || \
+ ((MODE) == TIM_ENCODERMODE_TI2) || \
+ ((MODE) == TIM_ENCODERMODE_TI12))
+/**
+ * @}
+ */
+/** @defgroup TIM_Interrupt_definition TIM interrupt Definition
+ * @{
+ */
+#define TIM_IT_UPDATE (TIM_DIER_UIE)
+#define TIM_IT_CC1 (TIM_DIER_CC1IE)
+#define TIM_IT_CC2 (TIM_DIER_CC2IE)
+#define TIM_IT_CC3 (TIM_DIER_CC3IE)
+#define TIM_IT_CC4 (TIM_DIER_CC4IE)
+#define TIM_IT_COM (TIM_DIER_COMIE)
+#define TIM_IT_TRIGGER (TIM_DIER_TIE)
+#define TIM_IT_BREAK (TIM_DIER_BIE)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_COMMUTATION TIM Commutation
+ * @{
+ */
+#define TIM_COMMUTATION_TRGI (TIM_CR2_CCUS)
+#define TIM_COMMUTATION_SOFTWARE ((uint32_t)0x0000)
+
+/**
+ * @}
+ */
+/** @defgroup TIM_DMA_sources TIM DMA Sources
+ * @{
+ */
+
+#define TIM_DMA_UPDATE (TIM_DIER_UDE)
+#define TIM_DMA_CC1 (TIM_DIER_CC1DE)
+#define TIM_DMA_CC2 (TIM_DIER_CC2DE)
+#define TIM_DMA_CC3 (TIM_DIER_CC3DE)
+#define TIM_DMA_CC4 (TIM_DIER_CC4DE)
+#define TIM_DMA_COM (TIM_DIER_COMDE)
+#define TIM_DMA_TRIGGER (TIM_DIER_TDE)
+
+#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & 0xFFFF80FF) == 0x00000000) && ((SOURCE) != 0x00000000))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Event_Source TIM Event Source
+ * @{
+ */
+#define TIM_EventSource_Update TIM_EGR_UG
+#define TIM_EventSource_CC1 TIM_EGR_CC1G
+#define TIM_EventSource_CC2 TIM_EGR_CC2G
+#define TIM_EventSource_CC3 TIM_EGR_CC3G
+#define TIM_EventSource_CC4 TIM_EGR_CC4G
+#define TIM_EventSource_COM TIM_EGR_COMG
+#define TIM_EventSource_Trigger TIM_EGR_TG
+#define TIM_EventSource_Break TIM_EGR_BG
+
+#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & 0xFFFFFF00) == 0x00000000) && ((SOURCE) != 0x00000000))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Flag_definition TIM Flag Definition
+ * @{
+ */
+
+#define TIM_FLAG_UPDATE (TIM_SR_UIF)
+#define TIM_FLAG_CC1 (TIM_SR_CC1IF)
+#define TIM_FLAG_CC2 (TIM_SR_CC2IF)
+#define TIM_FLAG_CC3 (TIM_SR_CC3IF)
+#define TIM_FLAG_CC4 (TIM_SR_CC4IF)
+#define TIM_FLAG_COM (TIM_SR_COMIF)
+#define TIM_FLAG_TRIGGER (TIM_SR_TIF)
+#define TIM_FLAG_BREAK (TIM_SR_BIF)
+#define TIM_FLAG_CC1OF (TIM_SR_CC1OF)
+#define TIM_FLAG_CC2OF (TIM_SR_CC2OF)
+#define TIM_FLAG_CC3OF (TIM_SR_CC3OF)
+#define TIM_FLAG_CC4OF (TIM_SR_CC4OF)
+
+#define IS_TIM_FLAG(FLAG) (((FLAG) == TIM_FLAG_UPDATE) || \
+ ((FLAG) == TIM_FLAG_CC1) || \
+ ((FLAG) == TIM_FLAG_CC2) || \
+ ((FLAG) == TIM_FLAG_CC3) || \
+ ((FLAG) == TIM_FLAG_CC4) || \
+ ((FLAG) == TIM_FLAG_COM) || \
+ ((FLAG) == TIM_FLAG_TRIGGER) || \
+ ((FLAG) == TIM_FLAG_BREAK) || \
+ ((FLAG) == TIM_FLAG_CC1OF) || \
+ ((FLAG) == TIM_FLAG_CC2OF) || \
+ ((FLAG) == TIM_FLAG_CC3OF) || \
+ ((FLAG) == TIM_FLAG_CC4OF))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Source TIM Clock Source
+ * @{
+ */
+#define TIM_CLOCKSOURCE_ETRMODE2 (TIM_SMCR_ETPS_1)
+#define TIM_CLOCKSOURCE_INTERNAL (TIM_SMCR_ETPS_0)
+#define TIM_CLOCKSOURCE_ITR0 ((uint32_t)0x0000)
+#define TIM_CLOCKSOURCE_ITR1 (TIM_SMCR_TS_0)
+#define TIM_CLOCKSOURCE_ITR2 (TIM_SMCR_TS_1)
+#define TIM_CLOCKSOURCE_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1)
+#define TIM_CLOCKSOURCE_TI1ED (TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_TI1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_TI2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_ETRMODE1 (TIM_SMCR_TS)
+
+#define IS_TIM_CLOCKSOURCE(CLOCK) (((CLOCK) == TIM_CLOCKSOURCE_INTERNAL) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR0) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR1) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR3) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI1ED) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI1) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE1))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Polarity TIM Clock Polarity
+ * @{
+ */
+#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */
+
+#define IS_TIM_CLOCKPOLARITY(POLARITY) (((POLARITY) == TIM_CLOCKPOLARITY_INVERTED) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_NONINVERTED) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_RISING) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_FALLING) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_BOTHEDGE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler
+ * @{
+ */
+#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */
+#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */
+#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */
+
+#define IS_TIM_CLOCKPRESCALER(PRESCALER) (((PRESCALER) == TIM_CLOCKPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV8))
+/**
+ * @}
+ */
+/** @defgroup TIM_Clock_Filter TIM Clock Filter
+ * @{
+ */
+
+#define IS_TIM_CLOCKFILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Source TIM ClearInput Source
+ * @{
+ */
+#define TIM_CLEARINPUTSOURCE_ETR ((uint32_t)0x0001)
+#define TIM_CLEARINPUTSOURCE_NONE ((uint32_t)0x0000)
+
+#define IS_TIM_CLEARINPUT_SOURCE(SOURCE) (((SOURCE) == TIM_CLEARINPUTSOURCE_NONE) || \
+ ((SOURCE) == TIM_CLEARINPUTSOURCE_ETR))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity
+ * @{
+ */
+#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */
+#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */
+
+
+#define IS_TIM_CLEARINPUT_POLARITY(POLARITY) (((POLARITY) == TIM_CLEARINPUTPOLARITY_INVERTED) || \
+ ((POLARITY) == TIM_CLEARINPUTPOLARITY_NONINVERTED))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler
+ * @{
+ */
+#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */
+
+#define IS_TIM_CLEARINPUT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Filter TIM Clear Input Filter
+ * @{
+ */
+
+#define IS_TIM_CLEARINPUT_FILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM Off-state Selection for Run Mode
+ * @{
+ */
+#define TIM_OSSR_ENABLE (TIM_BDTR_OSSR)
+#define TIM_OSSR_DISABLE ((uint32_t)0x0000)
+
+#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSR_ENABLE) || \
+ ((STATE) == TIM_OSSR_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM Off-state Selection for Idle Mode
+ * @{
+ */
+#define TIM_OSSI_ENABLE (TIM_BDTR_OSSI)
+#define TIM_OSSI_DISABLE ((uint32_t)0x0000)
+
+#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSI_ENABLE) || \
+ ((STATE) == TIM_OSSI_DISABLE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Lock_level TIM Lock Configuration
+ * @{
+ */
+#define TIM_LOCKLEVEL_OFF ((uint32_t)0x0000)
+#define TIM_LOCKLEVEL_1 (TIM_BDTR_LOCK_0)
+#define TIM_LOCKLEVEL_2 (TIM_BDTR_LOCK_1)
+#define TIM_LOCKLEVEL_3 (TIM_BDTR_LOCK)
+
+#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLEVEL_OFF) || \
+ ((LEVEL) == TIM_LOCKLEVEL_1) || \
+ ((LEVEL) == TIM_LOCKLEVEL_2) || \
+ ((LEVEL) == TIM_LOCKLEVEL_3))
+/**
+ * @}
+ */
+/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable
+ * @{
+ */
+#define TIM_BREAK_ENABLE (TIM_BDTR_BKE)
+#define TIM_BREAK_DISABLE ((uint32_t)0x0000)
+
+#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_BREAK_ENABLE) || \
+ ((STATE) == TIM_BREAK_DISABLE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Break_Polarity TIM Break Input Polarity
+ * @{
+ */
+#define TIM_BREAKPOLARITY_LOW ((uint32_t)0x0000)
+#define TIM_BREAKPOLARITY_HIGH (TIM_BDTR_BKP)
+
+#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BREAKPOLARITY_LOW) || \
+ ((POLARITY) == TIM_BREAKPOLARITY_HIGH))
+/**
+ * @}
+ */
+/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable
+ * @{
+ */
+#define TIM_AUTOMATICOUTPUT_ENABLE (TIM_BDTR_AOE)
+#define TIM_AUTOMATICOUTPUT_DISABLE ((uint32_t)0x0000)
+
+#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AUTOMATICOUTPUT_ENABLE) || \
+ ((STATE) == TIM_AUTOMATICOUTPUT_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection
+ * @{
+ */
+#define TIM_TRGO_RESET ((uint32_t)0x0000)
+#define TIM_TRGO_ENABLE (TIM_CR2_MMS_0)
+#define TIM_TRGO_UPDATE (TIM_CR2_MMS_1)
+#define TIM_TRGO_OC1 ((TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+#define TIM_TRGO_OC1REF (TIM_CR2_MMS_2)
+#define TIM_TRGO_OC2REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_0))
+#define TIM_TRGO_OC3REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1))
+#define TIM_TRGO_OC4REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+
+#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO_RESET) || \
+ ((SOURCE) == TIM_TRGO_ENABLE) || \
+ ((SOURCE) == TIM_TRGO_UPDATE) || \
+ ((SOURCE) == TIM_TRGO_OC1) || \
+ ((SOURCE) == TIM_TRGO_OC1REF) || \
+ ((SOURCE) == TIM_TRGO_OC2REF) || \
+ ((SOURCE) == TIM_TRGO_OC3REF) || \
+ ((SOURCE) == TIM_TRGO_OC4REF))
+
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Slave_Mode TIM Slave Mode
+ * @{
+ */
+
+#define TIM_SLAVEMODE_DISABLE ((uint32_t)0x0000)
+#define TIM_SLAVEMODE_RESET ((uint32_t)0x0004)
+#define TIM_SLAVEMODE_GATED ((uint32_t)0x0005)
+#define TIM_SLAVEMODE_TRIGGER ((uint32_t)0x0006)
+#define TIM_SLAVEMODE_EXTERNAL1 ((uint32_t)0x0007)
+
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \
+ ((MODE) == TIM_SLAVEMODE_GATED) || \
+ ((MODE) == TIM_SLAVEMODE_RESET) || \
+ ((MODE) == TIM_SLAVEMODE_TRIGGER) || \
+ ((MODE) == TIM_SLAVEMODE_EXTERNAL1))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Slave_Mode TIM Master/Slave Mode
+ * @{
+ */
+
+#define TIM_MASTERSLAVEMODE_ENABLE ((uint32_t)0x0080)
+#define TIM_MASTERSLAVEMODE_DISABLE ((uint32_t)0x0000)
+
+#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MASTERSLAVEMODE_ENABLE) || \
+ ((STATE) == TIM_MASTERSLAVEMODE_DISABLE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Trigger_Selection TIM Trigger Selection
+ * @{
+ */
+
+#define TIM_TS_ITR0 ((uint32_t)0x0000)
+#define TIM_TS_ITR1 ((uint32_t)0x0010)
+#define TIM_TS_ITR2 ((uint32_t)0x0020)
+#define TIM_TS_ITR3 ((uint32_t)0x0030)
+#define TIM_TS_TI1F_ED ((uint32_t)0x0040)
+#define TIM_TS_TI1FP1 ((uint32_t)0x0050)
+#define TIM_TS_TI2FP2 ((uint32_t)0x0060)
+#define TIM_TS_ETRF ((uint32_t)0x0070)
+#define TIM_TS_NONE ((uint32_t)0xFFFF)
+
+#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3) || \
+ ((SELECTION) == TIM_TS_TI1F_ED) || \
+ ((SELECTION) == TIM_TS_TI1FP1) || \
+ ((SELECTION) == TIM_TS_TI2FP2) || \
+ ((SELECTION) == TIM_TS_ETRF))
+
+#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3))
+
+#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3) || \
+ ((SELECTION) == TIM_TS_NONE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity
+ * @{
+ */
+#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+
+#define IS_TIM_TRIGGERPOLARITY(POLARITY) (((POLARITY) == TIM_TRIGGERPOLARITY_INVERTED ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_NONINVERTED) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_RISING ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_FALLING ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_BOTHEDGE ))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler
+ * @{
+ */
+#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */
+#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */
+#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */
+
+#define IS_TIM_TRIGGERPRESCALER(PRESCALER) (((PRESCALER) == TIM_TRIGGERPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Filter TIM Trigger Filter
+ * @{
+ */
+
+#define IS_TIM_TRIGGERFILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_TI1_Selection TIM TI1 Input Selection
+ * @{
+ */
+
+#define TIM_TI1SELECTION_CH1 ((uint32_t)0x0000)
+#define TIM_TI1SELECTION_XORCOMBINATION (TIM_CR2_TI1S)
+
+#define IS_TIM_TI1SELECTION(TI1SELECTION) (((TI1SELECTION) == TIM_TI1SELECTION_CH1) || \
+ ((TI1SELECTION) == TIM_TI1SELECTION_XORCOMBINATION))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Base_address TIM DMA Base address
+ * @{
+ */
+#define TIM_DMABase_CR1 (0x00000000)
+#define TIM_DMABase_CR2 (0x00000001)
+#define TIM_DMABase_SMCR (0x00000002)
+#define TIM_DMABase_DIER (0x00000003)
+#define TIM_DMABase_SR (0x00000004)
+#define TIM_DMABase_EGR (0x00000005)
+#define TIM_DMABase_CCMR1 (0x00000006)
+#define TIM_DMABase_CCMR2 (0x00000007)
+#define TIM_DMABase_CCER (0x00000008)
+#define TIM_DMABase_CNT (0x00000009)
+#define TIM_DMABase_PSC (0x0000000A)
+#define TIM_DMABase_ARR (0x0000000B)
+#define TIM_DMABase_RCR (0x0000000C)
+#define TIM_DMABase_CCR1 (0x0000000D)
+#define TIM_DMABase_CCR2 (0x0000000E)
+#define TIM_DMABase_CCR3 (0x0000000F)
+#define TIM_DMABase_CCR4 (0x00000010)
+#define TIM_DMABase_BDTR (0x00000011)
+#define TIM_DMABase_DCR (0x00000012)
+#define TIM_DMABase_OR (0x00000013)
+
+#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1) || \
+ ((BASE) == TIM_DMABase_CR2) || \
+ ((BASE) == TIM_DMABase_SMCR) || \
+ ((BASE) == TIM_DMABase_DIER) || \
+ ((BASE) == TIM_DMABase_SR) || \
+ ((BASE) == TIM_DMABase_EGR) || \
+ ((BASE) == TIM_DMABase_CCMR1) || \
+ ((BASE) == TIM_DMABase_CCMR2) || \
+ ((BASE) == TIM_DMABase_CCER) || \
+ ((BASE) == TIM_DMABase_CNT) || \
+ ((BASE) == TIM_DMABase_PSC) || \
+ ((BASE) == TIM_DMABase_ARR) || \
+ ((BASE) == TIM_DMABase_RCR) || \
+ ((BASE) == TIM_DMABase_CCR1) || \
+ ((BASE) == TIM_DMABase_CCR2) || \
+ ((BASE) == TIM_DMABase_CCR3) || \
+ ((BASE) == TIM_DMABase_CCR4) || \
+ ((BASE) == TIM_DMABase_BDTR) || \
+ ((BASE) == TIM_DMABase_DCR) || \
+ ((BASE) == TIM_DMABase_OR))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length
+ * @{
+ */
+
+#define TIM_DMABurstLength_1Transfer (0x00000000)
+#define TIM_DMABurstLength_2Transfers (0x00000100)
+#define TIM_DMABurstLength_3Transfers (0x00000200)
+#define TIM_DMABurstLength_4Transfers (0x00000300)
+#define TIM_DMABurstLength_5Transfers (0x00000400)
+#define TIM_DMABurstLength_6Transfers (0x00000500)
+#define TIM_DMABurstLength_7Transfers (0x00000600)
+#define TIM_DMABurstLength_8Transfers (0x00000700)
+#define TIM_DMABurstLength_9Transfers (0x00000800)
+#define TIM_DMABurstLength_10Transfers (0x00000900)
+#define TIM_DMABurstLength_11Transfers (0x00000A00)
+#define TIM_DMABurstLength_12Transfers (0x00000B00)
+#define TIM_DMABurstLength_13Transfers (0x00000C00)
+#define TIM_DMABurstLength_14Transfers (0x00000D00)
+#define TIM_DMABurstLength_15Transfers (0x00000E00)
+#define TIM_DMABurstLength_16Transfers (0x00000F00)
+#define TIM_DMABurstLength_17Transfers (0x00001000)
+#define TIM_DMABurstLength_18Transfers (0x00001100)
+
+#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Transfer) || \
+ ((LENGTH) == TIM_DMABurstLength_2Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_3Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_4Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_5Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_6Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_7Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_8Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_9Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_10Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_11Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_12Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_13Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_14Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_15Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_16Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_17Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_18Transfers))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Filer_Value TIM Input Capture Value
+ * @{
+ */
+
+#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Handle_index TIM DMA Handle Index
+ * @{
+ */
+#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0) /*!< Index of the DMA handle used for Update DMA requests */
+#define TIM_DMA_ID_CC1 ((uint16_t) 0x1) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */
+#define TIM_DMA_ID_CC2 ((uint16_t) 0x2) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */
+#define TIM_DMA_ID_CC3 ((uint16_t) 0x3) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */
+#define TIM_DMA_ID_CC4 ((uint16_t) 0x4) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */
+#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x5) /*!< Index of the DMA handle used for Commutation DMA requests */
+#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x6) /*!< Index of the DMA handle used for Trigger DMA requests */
+/**
+ * @}
+ */
+
+/** @defgroup Channel_CC_State TIM Capture/Compare Channel State
+ * @{
+ */
+#define TIM_CCx_ENABLE ((uint32_t)0x0001)
+#define TIM_CCx_DISABLE ((uint32_t)0x0000)
+#define TIM_CCxN_ENABLE ((uint32_t)0x0004)
+#define TIM_CCxN_DISABLE ((uint32_t)0x0000)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup TIM_Exported_Macros TIM Exported Macros
+ * @{
+ */
+
+/** @brief Reset TIM handle state
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TIM_STATE_RESET)
+
+/**
+ * @brief Enable the TIM peripheral.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN))
+
+/**
+ * @brief Enable the TIM main Output.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE))
+
+/**
+ * @brief Disable the TIM peripheral.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & CCER_CCxE_MASK) == 0) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & CCER_CCxNE_MASK) == 0) \
+ { \
+ (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \
+ } \
+ } \
+ } while(0)
+/* The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN
+ channels have been disabled */
+/**
+ * @brief Disable the TIM main Output.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & CCER_CCxE_MASK) == 0) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & CCER_CCxNE_MASK) == 0) \
+ { \
+ (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \
+ } \
+ } \
+ } while(0)
+
+#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__))
+#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__))
+#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__))
+#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__))
+#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__))
+#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+#define __HAL_TIM_GET_ITSTATUS(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
+
+#define __HAL_TIM_DIRECTION_STATUS(__HANDLE__) (((__HANDLE__)->Instance->CR1 & (TIM_CR1_DIR)) == (TIM_CR1_DIR))
+#define __HAL_TIM_PRESCALER (__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__))
+
+#define __HAL_TIM_SetICPrescalerValue(__HANDLE__, __CHANNEL__, __ICPSC__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\
+ ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8)))
+
+#define __HAL_TIM_ResetICPrescalerValue(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\
+ ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC))
+
+/**
+ * @brief Sets the TIM Capture Compare Register value on runtime without
+ * calling another time ConfigChannel function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __COMPARE__: specifies the Capture Compare register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SetCompare(__HANDLE__, __CHANNEL__, __COMPARE__) \
+(*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2)) = (__COMPARE__))
+
+/**
+ * @brief Gets the TIM Capture Compare Register value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channel associated with the capture compare register
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get capture/compare 1 register value
+ * @arg TIM_CHANNEL_2: get capture/compare 2 register value
+ * @arg TIM_CHANNEL_3: get capture/compare 3 register value
+ * @arg TIM_CHANNEL_4: get capture/compare 4 register value
+ * @retval None
+ */
+#define __HAL_TIM_GetCompare(__HANDLE__, __CHANNEL__) \
+ (*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2)))
+
+/**
+ * @brief Sets the TIM Counter Register value on runtime.
+ * @param __HANDLE__: TIM handle.
+ * @param __COUNTER__: specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SetCounter(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__))
+
+/**
+ * @brief Gets the TIM Counter Register value on runtime.
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GetCounter(__HANDLE__) \
+ ((__HANDLE__)->Instance->CNT)
+
+/**
+ * @brief Sets the TIM Autoreload Register value on runtime without calling
+ * another time any Init function.
+ * @param __HANDLE__: TIM handle.
+ * @param __AUTORELOAD__: specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SetAutoreload(__HANDLE__, __AUTORELOAD__) \
+ do{ \
+ (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \
+ (__HANDLE__)->Init.Period = (__AUTORELOAD__); \
+ } while(0)
+
+/**
+ * @brief Gets the TIM Autoreload Register value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GetAutoreload(__HANDLE__) \
+ ((__HANDLE__)->Instance->ARR)
+
+/**
+ * @brief Sets the TIM Clock Division value on runtime without calling
+ * another time any Init function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CKD__: specifies the clock division value.
+ * This parameter can be one of the following value:
+ * @arg TIM_CLOCKDIVISION_DIV1
+ * @arg TIM_CLOCKDIVISION_DIV2
+ * @arg TIM_CLOCKDIVISION_DIV4
+ * @retval None
+ */
+#define __HAL_TIM_SetClockDivision(__HANDLE__, __CKD__) \
+ do{ \
+ (__HANDLE__)->Instance->CR1 &= ~TIM_CR1_CKD; \
+ (__HANDLE__)->Instance->CR1 |= (__CKD__); \
+ (__HANDLE__)->Init.ClockDivision = (__CKD__); \
+ } while(0)
+
+/**
+ * @brief Gets the TIM Clock Division value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GetClockDivision(__HANDLE__) \
+ ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
+
+/**
+ * @brief Sets the TIM Input Capture prescaler on runtime without calling
+ * another time HAL_TIM_IC_ConfigChannel() function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __ICPSC__: specifies the Input Capture4 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+#define __HAL_TIM_SetICPrescaler(__HANDLE__, __CHANNEL__, __ICPSC__) \
+ do{ \
+ __HAL_TIM_ResetICPrescalerValue((__HANDLE__), (__CHANNEL__)); \
+ __HAL_TIM_SetICPrescalerValue((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \
+ } while(0)
+
+/**
+ * @brief Gets the TIM Input Capture prescaler on runtime
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__: TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get input capture 1 prescaler value
+ * @arg TIM_CHANNEL_2: get input capture 2 prescaler value
+ * @arg TIM_CHANNEL_3: get input capture 3 prescaler value
+ * @arg TIM_CHANNEL_4: get input capture 4 prescaler value
+ * @retval None
+ */
+#define __HAL_TIM_GetICPrescaler(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\
+ (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8)
+
+/**
+ * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register
+ * @param __HANDLE__: TIM handle.
+ * @note When the USR bit of the TIMx_CR1 register is set, only counter
+ * overflow/underflow generates an update interrupt or DMA request (if
+ * enabled)
+ * @retval None
+ */
+#define __HAL_TIM_URS_ENABLE(__HANDLE__) \
+ ((__HANDLE__)->Instance->CR1|= (TIM_CR1_URS))
+
+/**
+ * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register
+ * @param __HANDLE__: TIM handle.
+ * @note When the USR bit of the TIMx_CR1 register is reset, any of the
+ * following events generate an update interrupt or DMA request (if
+ * enabled):
+ * (+) Counter overflow/underflow
+ * (+) Setting the UG bit
+ * (+) Update generation through the slave mode controller
+ * @retval None
+ */
+#define __HAL_TIM_URS_DISABLE(__HANDLE__) \
+ ((__HANDLE__)->Instance->CR1&=~(TIM_CR1_URS))
+
+/**
+ * @}
+ */
+
+/* Include TIM HAL Extension module */
+#include "stm32f0xx_hal_tim_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIM_Exported_Functions TIM Exported Functions
+ * @{
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group1 Time Base functions
+ * @brief Time Base functions
+ * @{
+ */
+/* Time Base functions ********************************************************/
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group2 Time Output Compare functions
+ * @brief Time Output Compare functions
+ * @{
+ */
+/* Timer Output Compare functions **********************************************/
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group3 Time PWM functions
+ * @brief Time PWM functions
+ * @{
+ */
+/* Timer PWM functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group4 Time Input Capture functions
+ * @brief Time Input Capture functions
+ * @{
+ */
+/* Timer Input Capture functions ***********************************************/
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group5 Time One Pulse functions
+ * @brief Time One Pulse functions
+ * @{
+ */
+/* Timer One Pulse functions ***************************************************/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode);
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group6 Time Encoder functions
+ * @brief Time Encoder functions
+ * @{
+ */
+/* Timer Encoder functions *****************************************************/
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim);
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group7 TIM IRQ handler management
+ * @brief IRQ handler management
+ * @{
+ */
+/* Interrupt Handler functions **********************************************/
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group8 Peripheral Control functions
+ * @brief Peripheral Control functions
+ * @{
+ */
+/* Control functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel);
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig);
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource);
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group9
+ * @brief TIM Callbacks functions
+ * @{
+ */
+/* Callback in non blocking modes (Interrupt and DMA) *************************/
+void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group10
+ * @brief Peripheral State functions
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private Macros -----------------------------------------------------------*/
+/** @defgroup TIM_Private_Macros TIM Private Macros
+ * @{
+ */
+/* The counter of a timer instance is disabled only if all the CCx and CCxN
+ channels have been disabled */
+#define CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E))
+#define CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE))
+/**
+ * @}
+ */
+
+/* Private Functions --------------------------------------------------------*/
+/** @addtogroup TIM_Private_Functions
+ * @{
+ */
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure);
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter);
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void HAL_TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma);
+void HAL_TIM_DMAError(DMA_HandleTypeDef *hdma);
+void HAL_TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma);
+void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_TIM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_tim_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,293 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_tim_ex.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of TIM HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_TIM_EX_H
+#define __STM32F0xx_HAL_TIM_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TIMEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Types TIMEx Extended Exported Types
+ * @{
+ */
+
+/**
+ * @brief TIM Hall sensor Configuration Structure definition
+ */
+
+typedef struct
+{
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+ uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+} TIM_HallSensor_InitTypeDef;
+
+/**
+ * @brief TIM Master configuration Structure definition
+ */
+typedef struct {
+ uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection
+ This parameter can be a value of @ref TIM_Master_Mode_Selection */
+ uint32_t MasterSlaveMode; /*!< Master/slave mode selection
+ This parameter can be a value of @ref TIM_Master_Slave_Mode */
+}TIM_MasterConfigTypeDef;
+
+/**
+ * @brief TIM Break and Dead time configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OffStateRunMode; /*!< TIM off state in run mode
+ This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+ uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode
+ This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+ uint32_t LockLevel; /*!< TIM Lock level
+ This parameter can be a value of @ref TIM_Lock_level */
+ uint32_t DeadTime; /*!< TIM dead Time
+ This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+ uint32_t BreakState; /*!< TIM Break State
+ This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+ uint32_t BreakPolarity; /*!< TIM Break input polarity
+ This parameter can be a value of @ref TIM_Break_Polarity */
+ uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state
+ This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+} TIM_BreakDeadTimeConfigTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Constants TIMEx Exported Constants
+ * @{
+ */
+
+/** @defgroup TIMEx_Remap TIMEx Remap
+ * @{
+ */
+
+#define TIM_TIM14_GPIO (0x00000000) /*!< TIM14 TI1 is connected to GPIO */
+#define TIM_TIM14_RTC (0x00000001) /*!< TIM14 TI1 is connected to RTC_clock */
+#define TIM_TIM14_HSE (0x00000002) /*!< TIM14 TI1 is connected to HSE/32 */
+#define TIM_TIM14_MCO (0x00000003) /*!< TIM14 TI1 is connected to MCO */
+
+#define IS_TIM_REMAP(TIM_REMAP) (((TIM_REMAP) == TIM_TIM14_GPIO) ||\
+ ((TIM_REMAP) == TIM_TIM14_RTC) ||\
+ ((TIM_REMAP) == TIM_TIM14_HSE) ||\
+ ((TIM_REMAP) == TIM_TIM14_MCO))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Filter TIM Clock Filter
+ * @{
+ */
+#define IS_TIM_DEADTIME(DEADTIME) ((DEADTIME) <= 0xFF)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIMEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group1 Timer Hall Sensor functions
+ * @brief Timer Hall Sensor functions
+ * @{
+ */
+/* Timer Hall Sensor functions **********************************************/
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);
+
+void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);
+
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group2 Timer Complementary Output Compare functions
+ * @brief Timer Complementary Output Compare functions
+ * @{
+ */
+/* Timer Complementary Output Compare functions *****************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group3 Timer Complementary PWM functions
+ * @brief Timer Complementary PWM functions
+ * @{
+ */
+/* Timer Complementary PWM functions ****************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group4 Timer Complementary One Pulse functions
+ * @brief Timer Complementary One Pulse functions
+ * @{
+ */
+/* Timer Complementary One Pulse functions **********************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group5 Peripheral Control functions
+ * @brief Peripheral Control functions
+ * @{
+ */
+/* Extended Control functions ************************************************/
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig);
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group6 Extension Callbacks functions
+ * @brief Extended Callbacks functions
+ * @{
+ */
+/* Extension Callback *********************************************************/
+void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group7 Extension Peripheral State functions
+ * @brief Extended Peripheral State functions
+ * @{
+ */
+/* Extension Peripheral State functions **************************************/
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F0xx_HAL_TIM_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_tsc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,724 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_tsc.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief This file contains all the functions prototypes for the TSC firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_TSC_H
+#define __STM32F0xx_TSC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F051x8) || defined(STM32F071xB) || defined(STM32F091xC) || \
+ defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || \
+ defined(STM32F058xx) || defined(STM32F078xx) || defined(STM32F098xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TSC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup TSC_Exported_Types TSC Exported Types
+ * @{
+ */
+/**
+ * @brief TSC state structure definition
+ */
+typedef enum
+{
+ HAL_TSC_STATE_RESET = 0x00, /*!< TSC registers have their reset value */
+ HAL_TSC_STATE_READY = 0x01, /*!< TSC registers are initialized or acquisition is completed with success */
+ HAL_TSC_STATE_BUSY = 0x02, /*!< TSC initialization or acquisition is on-going */
+ HAL_TSC_STATE_ERROR = 0x03 /*!< Acquisition is completed with max count error */
+} HAL_TSC_StateTypeDef;
+
+/**
+ * @brief TSC group status structure definition
+ */
+typedef enum
+{
+ TSC_GROUP_ONGOING = 0x00, /*!< Acquisition on group is on-going or not started */
+ TSC_GROUP_COMPLETED = 0x01 /*!< Acquisition on group is completed with success (no max count error) */
+} TSC_GroupStatusTypeDef;
+
+/**
+ * @brief TSC init structure definition
+ */
+typedef struct
+{
+ uint32_t CTPulseHighLength; /*!< Charge-transfer high pulse length */
+ uint32_t CTPulseLowLength; /*!< Charge-transfer low pulse length */
+ uint32_t SpreadSpectrum; /*!< Spread spectrum activation */
+ uint32_t SpreadSpectrumDeviation; /*!< Spread spectrum deviation */
+ uint32_t SpreadSpectrumPrescaler; /*!< Spread spectrum prescaler */
+ uint32_t PulseGeneratorPrescaler; /*!< Pulse generator prescaler */
+ uint32_t MaxCountValue; /*!< Max count value */
+ uint32_t IODefaultMode; /*!< IO default mode */
+ uint32_t SynchroPinPolarity; /*!< Synchro pin polarity */
+ uint32_t AcquisitionMode; /*!< Acquisition mode */
+ uint32_t MaxCountInterrupt; /*!< Max count interrupt activation */
+ uint32_t ChannelIOs; /*!< Channel IOs mask */
+ uint32_t ShieldIOs; /*!< Shield IOs mask */
+ uint32_t SamplingIOs; /*!< Sampling IOs mask */
+} TSC_InitTypeDef;
+
+/**
+ * @brief TSC IOs configuration structure definition
+ */
+typedef struct
+{
+ uint32_t ChannelIOs; /*!< Channel IOs mask */
+ uint32_t ShieldIOs; /*!< Shield IOs mask */
+ uint32_t SamplingIOs; /*!< Sampling IOs mask */
+} TSC_IOConfigTypeDef;
+
+/**
+ * @brief TSC handle Structure definition
+ */
+typedef struct
+{
+ TSC_TypeDef *Instance; /*!< Register base address */
+ TSC_InitTypeDef Init; /*!< Initialization parameters */
+ __IO HAL_TSC_StateTypeDef State; /*!< Peripheral state */
+ HAL_LockTypeDef Lock; /*!< Lock feature */
+} TSC_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup TSC_Exported_Constants TSC Exported Constants
+ * @{
+ */
+
+/** @defgroup TSC_CTPH_Cycles TSC Charge Transfer Pulse High
+ * @{
+ */
+#define TSC_CTPH_1CYCLE ((uint32_t)((uint32_t) 0 << 28))
+#define TSC_CTPH_2CYCLES ((uint32_t)((uint32_t) 1 << 28))
+#define TSC_CTPH_3CYCLES ((uint32_t)((uint32_t) 2 << 28))
+#define TSC_CTPH_4CYCLES ((uint32_t)((uint32_t) 3 << 28))
+#define TSC_CTPH_5CYCLES ((uint32_t)((uint32_t) 4 << 28))
+#define TSC_CTPH_6CYCLES ((uint32_t)((uint32_t) 5 << 28))
+#define TSC_CTPH_7CYCLES ((uint32_t)((uint32_t) 6 << 28))
+#define TSC_CTPH_8CYCLES ((uint32_t)((uint32_t) 7 << 28))
+#define TSC_CTPH_9CYCLES ((uint32_t)((uint32_t) 8 << 28))
+#define TSC_CTPH_10CYCLES ((uint32_t)((uint32_t) 9 << 28))
+#define TSC_CTPH_11CYCLES ((uint32_t)((uint32_t)10 << 28))
+#define TSC_CTPH_12CYCLES ((uint32_t)((uint32_t)11 << 28))
+#define TSC_CTPH_13CYCLES ((uint32_t)((uint32_t)12 << 28))
+#define TSC_CTPH_14CYCLES ((uint32_t)((uint32_t)13 << 28))
+#define TSC_CTPH_15CYCLES ((uint32_t)((uint32_t)14 << 28))
+#define TSC_CTPH_16CYCLES ((uint32_t)((uint32_t)15 << 28))
+#define IS_TSC_CTPH(VAL) (((VAL) == TSC_CTPH_1CYCLE) || \
+ ((VAL) == TSC_CTPH_2CYCLES) || \
+ ((VAL) == TSC_CTPH_3CYCLES) || \
+ ((VAL) == TSC_CTPH_4CYCLES) || \
+ ((VAL) == TSC_CTPH_5CYCLES) || \
+ ((VAL) == TSC_CTPH_6CYCLES) || \
+ ((VAL) == TSC_CTPH_7CYCLES) || \
+ ((VAL) == TSC_CTPH_8CYCLES) || \
+ ((VAL) == TSC_CTPH_9CYCLES) || \
+ ((VAL) == TSC_CTPH_10CYCLES) || \
+ ((VAL) == TSC_CTPH_11CYCLES) || \
+ ((VAL) == TSC_CTPH_12CYCLES) || \
+ ((VAL) == TSC_CTPH_13CYCLES) || \
+ ((VAL) == TSC_CTPH_14CYCLES) || \
+ ((VAL) == TSC_CTPH_15CYCLES) || \
+ ((VAL) == TSC_CTPH_16CYCLES))
+/**
+ * @}
+ */
+
+/** @defgroup TSC_CTPL_Cycles TSC Charge Transfer Pulse Low
+ * @{
+ */
+#define TSC_CTPL_1CYCLE ((uint32_t)((uint32_t) 0 << 24))
+#define TSC_CTPL_2CYCLES ((uint32_t)((uint32_t) 1 << 24))
+#define TSC_CTPL_3CYCLES ((uint32_t)((uint32_t) 2 << 24))
+#define TSC_CTPL_4CYCLES ((uint32_t)((uint32_t) 3 << 24))
+#define TSC_CTPL_5CYCLES ((uint32_t)((uint32_t) 4 << 24))
+#define TSC_CTPL_6CYCLES ((uint32_t)((uint32_t) 5 << 24))
+#define TSC_CTPL_7CYCLES ((uint32_t)((uint32_t) 6 << 24))
+#define TSC_CTPL_8CYCLES ((uint32_t)((uint32_t) 7 << 24))
+#define TSC_CTPL_9CYCLES ((uint32_t)((uint32_t) 8 << 24))
+#define TSC_CTPL_10CYCLES ((uint32_t)((uint32_t) 9 << 24))
+#define TSC_CTPL_11CYCLES ((uint32_t)((uint32_t)10 << 24))
+#define TSC_CTPL_12CYCLES ((uint32_t)((uint32_t)11 << 24))
+#define TSC_CTPL_13CYCLES ((uint32_t)((uint32_t)12 << 24))
+#define TSC_CTPL_14CYCLES ((uint32_t)((uint32_t)13 << 24))
+#define TSC_CTPL_15CYCLES ((uint32_t)((uint32_t)14 << 24))
+#define TSC_CTPL_16CYCLES ((uint32_t)((uint32_t)15 << 24))
+#define IS_TSC_CTPL(VAL) (((VAL) == TSC_CTPL_1CYCLE) || \
+ ((VAL) == TSC_CTPL_2CYCLES) || \
+ ((VAL) == TSC_CTPL_3CYCLES) || \
+ ((VAL) == TSC_CTPL_4CYCLES) || \
+ ((VAL) == TSC_CTPL_5CYCLES) || \
+ ((VAL) == TSC_CTPL_6CYCLES) || \
+ ((VAL) == TSC_CTPL_7CYCLES) || \
+ ((VAL) == TSC_CTPL_8CYCLES) || \
+ ((VAL) == TSC_CTPL_9CYCLES) || \
+ ((VAL) == TSC_CTPL_10CYCLES) || \
+ ((VAL) == TSC_CTPL_11CYCLES) || \
+ ((VAL) == TSC_CTPL_12CYCLES) || \
+ ((VAL) == TSC_CTPL_13CYCLES) || \
+ ((VAL) == TSC_CTPL_14CYCLES) || \
+ ((VAL) == TSC_CTPL_15CYCLES) || \
+ ((VAL) == TSC_CTPL_16CYCLES))
+/**
+ * @}
+ */
+
+/** @defgroup TSC_SS_Prescaler_definition TSC Spread spectrum prescaler definition
+ * @{
+ */
+#define TSC_SS_PRESC_DIV1 ((uint32_t)0)
+#define TSC_SS_PRESC_DIV2 (TSC_CR_SSPSC)
+#define IS_TSC_SS_PRESC(VAL) (((VAL) == TSC_SS_PRESC_DIV1) || ((VAL) == TSC_SS_PRESC_DIV2))
+
+/**
+ * @}
+ */
+
+/** @defgroup TSC_PG_Prescaler_definition TSC Pulse Generator prescaler definition
+ * @{
+ */
+#define TSC_PG_PRESC_DIV1 ((uint32_t)(0 << 12))
+#define TSC_PG_PRESC_DIV2 ((uint32_t)(1 << 12))
+#define TSC_PG_PRESC_DIV4 ((uint32_t)(2 << 12))
+#define TSC_PG_PRESC_DIV8 ((uint32_t)(3 << 12))
+#define TSC_PG_PRESC_DIV16 ((uint32_t)(4 << 12))
+#define TSC_PG_PRESC_DIV32 ((uint32_t)(5 << 12))
+#define TSC_PG_PRESC_DIV64 ((uint32_t)(6 << 12))
+#define TSC_PG_PRESC_DIV128 ((uint32_t)(7 << 12))
+#define IS_TSC_PG_PRESC(VAL) (((VAL) == TSC_PG_PRESC_DIV1) || \
+ ((VAL) == TSC_PG_PRESC_DIV2) || \
+ ((VAL) == TSC_PG_PRESC_DIV4) || \
+ ((VAL) == TSC_PG_PRESC_DIV8) || \
+ ((VAL) == TSC_PG_PRESC_DIV16) || \
+ ((VAL) == TSC_PG_PRESC_DIV32) || \
+ ((VAL) == TSC_PG_PRESC_DIV64) || \
+ ((VAL) == TSC_PG_PRESC_DIV128))
+/**
+ * @}
+ */
+
+/** @defgroup TSC_MCV_definition TSC Max Count Value definition
+ * @{
+ */
+#define TSC_MCV_255 ((uint32_t)(0 << 5))
+#define TSC_MCV_511 ((uint32_t)(1 << 5))
+#define TSC_MCV_1023 ((uint32_t)(2 << 5))
+#define TSC_MCV_2047 ((uint32_t)(3 << 5))
+#define TSC_MCV_4095 ((uint32_t)(4 << 5))
+#define TSC_MCV_8191 ((uint32_t)(5 << 5))
+#define TSC_MCV_16383 ((uint32_t)(6 << 5))
+#define IS_TSC_MCV(VAL) (((VAL) == TSC_MCV_255) || \
+ ((VAL) == TSC_MCV_511) || \
+ ((VAL) == TSC_MCV_1023) || \
+ ((VAL) == TSC_MCV_2047) || \
+ ((VAL) == TSC_MCV_4095) || \
+ ((VAL) == TSC_MCV_8191) || \
+ ((VAL) == TSC_MCV_16383))
+/**
+ * @}
+ */
+
+/** @defgroup TSC_IO_default_mode_definition TSC I/O default mode definition
+ * @{
+ */
+#define TSC_IODEF_OUT_PP_LOW ((uint32_t)0)
+#define TSC_IODEF_IN_FLOAT (TSC_CR_IODEF)
+#define IS_TSC_IODEF(VAL) (((VAL) == TSC_IODEF_OUT_PP_LOW) || ((VAL) == TSC_IODEF_IN_FLOAT))
+/**
+ * @}
+ */
+
+/** @defgroup TSC_Synchronization_pin_polarity TSC Synchronization pin polarity
+ * @{
+ */
+#define TSC_SYNC_POL_FALL ((uint32_t)0)
+#define TSC_SYNC_POL_RISE_HIGH (TSC_CR_SYNCPOL)
+#define IS_TSC_SYNC_POL(VAL) (((VAL) == TSC_SYNC_POL_FALL) || ((VAL) == TSC_SYNC_POL_RISE_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup TSC_Acquisition_mode TSC Acquisition mode
+ * @{
+ */
+#define TSC_ACQ_MODE_NORMAL ((uint32_t)0)
+#define TSC_ACQ_MODE_SYNCHRO (TSC_CR_AM)
+#define IS_TSC_ACQ_MODE(VAL) (((VAL) == TSC_ACQ_MODE_NORMAL) || ((VAL) == TSC_ACQ_MODE_SYNCHRO))
+/**
+ * @}
+ */
+
+/** @defgroup TSC_IO_mode_definition TSC I/O mode definition
+ * @{
+ */
+#define TSC_IOMODE_UNUSED ((uint32_t)0)
+#define TSC_IOMODE_CHANNEL ((uint32_t)1)
+#define TSC_IOMODE_SHIELD ((uint32_t)2)
+#define TSC_IOMODE_SAMPLING ((uint32_t)3)
+#define IS_TSC_IOMODE(VAL) (((VAL) == TSC_IOMODE_UNUSED) || \
+ ((VAL) == TSC_IOMODE_CHANNEL) || \
+ ((VAL) == TSC_IOMODE_SHIELD) || \
+ ((VAL) == TSC_IOMODE_SAMPLING))
+/**
+ * @}
+ */
+
+/** @defgroup TSC_interrupts_definition TSC interrupts definition
+ * @{
+ */
+#define TSC_IT_EOA ((uint32_t)TSC_IER_EOAIE)
+#define TSC_IT_MCE ((uint32_t)TSC_IER_MCEIE)
+#define IS_TSC_MCE_IT(VAL) (((VAL) == DISABLE) || ((VAL) == ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup TSC_flags_definition TSC Flags Definition
+ * @{
+ */
+#define TSC_FLAG_EOA ((uint32_t)TSC_ISR_EOAF)
+#define TSC_FLAG_MCE ((uint32_t)TSC_ISR_MCEF)
+/**
+ * @}
+ */
+
+/** @defgroup TSC_groups_definition TSC groups definition
+ * @{
+ */
+#define TSC_NB_OF_GROUPS (8)
+
+#define TSC_GROUP1 ((uint32_t)0x00000001)
+#define TSC_GROUP2 ((uint32_t)0x00000002)
+#define TSC_GROUP3 ((uint32_t)0x00000004)
+#define TSC_GROUP4 ((uint32_t)0x00000008)
+#define TSC_GROUP5 ((uint32_t)0x00000010)
+#define TSC_GROUP6 ((uint32_t)0x00000020)
+#define TSC_GROUP7 ((uint32_t)0x00000040)
+#define TSC_GROUP8 ((uint32_t)0x00000080)
+#define TSC_ALL_GROUPS ((uint32_t)0x000000FF)
+
+#define TSC_GROUP1_IDX ((uint32_t)0)
+#define TSC_GROUP2_IDX ((uint32_t)1)
+#define TSC_GROUP3_IDX ((uint32_t)2)
+#define TSC_GROUP4_IDX ((uint32_t)3)
+#define TSC_GROUP5_IDX ((uint32_t)4)
+#define TSC_GROUP6_IDX ((uint32_t)5)
+#define TSC_GROUP7_IDX ((uint32_t)6)
+#define TSC_GROUP8_IDX ((uint32_t)7)
+#define IS_GROUP_INDEX(VAL) (((VAL) == 0) || (((VAL) > 0) && ((VAL) < TSC_NB_OF_GROUPS)))
+
+#define TSC_GROUP1_IO1 ((uint32_t)0x00000001)
+#define TSC_GROUP1_IO2 ((uint32_t)0x00000002)
+#define TSC_GROUP1_IO3 ((uint32_t)0x00000004)
+#define TSC_GROUP1_IO4 ((uint32_t)0x00000008)
+#define TSC_GROUP1_ALL_IOS ((uint32_t)0x0000000F)
+
+#define TSC_GROUP2_IO1 ((uint32_t)0x00000010)
+#define TSC_GROUP2_IO2 ((uint32_t)0x00000020)
+#define TSC_GROUP2_IO3 ((uint32_t)0x00000040)
+#define TSC_GROUP2_IO4 ((uint32_t)0x00000080)
+#define TSC_GROUP2_ALL_IOS ((uint32_t)0x000000F0)
+
+#define TSC_GROUP3_IO1 ((uint32_t)0x00000100)
+#define TSC_GROUP3_IO2 ((uint32_t)0x00000200)
+#define TSC_GROUP3_IO3 ((uint32_t)0x00000400)
+#define TSC_GROUP3_IO4 ((uint32_t)0x00000800)
+#define TSC_GROUP3_ALL_IOS ((uint32_t)0x00000F00)
+
+#define TSC_GROUP4_IO1 ((uint32_t)0x00001000)
+#define TSC_GROUP4_IO2 ((uint32_t)0x00002000)
+#define TSC_GROUP4_IO3 ((uint32_t)0x00004000)
+#define TSC_GROUP4_IO4 ((uint32_t)0x00008000)
+#define TSC_GROUP4_ALL_IOS ((uint32_t)0x0000F000)
+
+#define TSC_GROUP5_IO1 ((uint32_t)0x00010000)
+#define TSC_GROUP5_IO2 ((uint32_t)0x00020000)
+#define TSC_GROUP5_IO3 ((uint32_t)0x00040000)
+#define TSC_GROUP5_IO4 ((uint32_t)0x00080000)
+#define TSC_GROUP5_ALL_IOS ((uint32_t)0x000F0000)
+
+#define TSC_GROUP6_IO1 ((uint32_t)0x00100000)
+#define TSC_GROUP6_IO2 ((uint32_t)0x00200000)
+#define TSC_GROUP6_IO3 ((uint32_t)0x00400000)
+#define TSC_GROUP6_IO4 ((uint32_t)0x00800000)
+#define TSC_GROUP6_ALL_IOS ((uint32_t)0x00F00000)
+
+#define TSC_GROUP7_IO1 ((uint32_t)0x01000000)
+#define TSC_GROUP7_IO2 ((uint32_t)0x02000000)
+#define TSC_GROUP7_IO3 ((uint32_t)0x04000000)
+#define TSC_GROUP7_IO4 ((uint32_t)0x08000000)
+#define TSC_GROUP7_ALL_IOS ((uint32_t)0x0F000000)
+
+#define TSC_GROUP8_IO1 ((uint32_t)0x10000000)
+#define TSC_GROUP8_IO2 ((uint32_t)0x20000000)
+#define TSC_GROUP8_IO3 ((uint32_t)0x40000000)
+#define TSC_GROUP8_IO4 ((uint32_t)0x80000000)
+#define TSC_GROUP8_ALL_IOS ((uint32_t)0xF0000000)
+
+#define TSC_ALL_GROUPS_ALL_IOS ((uint32_t)0xFFFFFFFF)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros -----------------------------------------------------------*/
+/** @defgroup TSC_Private_Macros TSC Private Macros
+ * @{
+ */
+/** @defgroup TSC_Spread_Spectrum TSC Spread Spectrum
+ * @{
+ */
+#define IS_TSC_SS(VAL) (((VAL) == DISABLE) || ((VAL) == ENABLE))
+
+#define IS_TSC_SSD(VAL) (((VAL) == 0) || (((VAL) > 0) && ((VAL) < 128)))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup TSC_Exported_Macros TSC Exported Macros
+ * @{
+ */
+
+/** @brief Reset TSC handle state
+ * @param __HANDLE__: TSC handle.
+ * @retval None
+ */
+#define __HAL_TSC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TSC_STATE_RESET)
+
+/**
+ * @brief Enable the TSC peripheral.
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= TSC_CR_TSCE)
+
+/**
+ * @brief Disable the TSC peripheral.
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= (uint32_t)(~TSC_CR_TSCE))
+
+/**
+ * @brief Start acquisition
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_START_ACQ(__HANDLE__) ((__HANDLE__)->Instance->CR |= TSC_CR_START)
+
+/**
+ * @brief Stop acquisition
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_STOP_ACQ(__HANDLE__) ((__HANDLE__)->Instance->CR &= (uint32_t)(~TSC_CR_START))
+
+/**
+ * @brief Set IO default mode to output push-pull low
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_SET_IODEF_OUTPPLOW(__HANDLE__) ((__HANDLE__)->Instance->CR &= (uint32_t)(~TSC_CR_IODEF))
+
+/**
+ * @brief Set IO default mode to input floating
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_SET_IODEF_INFLOAT(__HANDLE__) ((__HANDLE__)->Instance->CR |= TSC_CR_IODEF)
+
+/**
+ * @brief Set synchronization polarity to falling edge
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_SET_SYNC_POL_FALL(__HANDLE__) ((__HANDLE__)->Instance->CR &= (uint32_t)(~TSC_CR_SYNCPOL))
+
+/**
+ * @brief Set synchronization polarity to rising edge and high level
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_SET_SYNC_POL_RISE_HIGH(__HANDLE__) ((__HANDLE__)->Instance->CR |= TSC_CR_SYNCPOL)
+
+/**
+ * @brief Enable TSC interrupt.
+ * @param __HANDLE__: TSC handle
+ * @param __INTERRUPT__: TSC interrupt
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/**
+ * @brief Disable TSC interrupt.
+ * @param __HANDLE__: TSC handle
+ * @param __INTERRUPT__: TSC interrupt
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (uint32_t)(~(__INTERRUPT__)))
+
+/** @brief Check if the specified TSC interrupt source is enabled or disabled.
+ * @param __HANDLE__: TSC Handle
+ * @param __INTERRUPT__: TSC interrupt
+ * @retval SET or RESET
+ */
+#define __HAL_TSC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+ * @brief Get the selected TSC's flag status.
+ * @param __HANDLE__: TSC handle
+ * @param __FLAG__: TSC flag
+ * @retval SET or RESET
+ */
+#define __HAL_TSC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) ? SET : RESET)
+
+/**
+ * @brief Clear the TSC's pending flag.
+ * @param __HANDLE__: TSC handle
+ * @param __FLAG__: TSC flag
+ * @retval None
+ */
+#define __HAL_TSC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/**
+ * @brief Enable schmitt trigger hysteresis on a group of IOs
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE_HYSTERESIS(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOHCR |= (__GX_IOY_MASK__))
+
+/**
+ * @brief Disable schmitt trigger hysteresis on a group of IOs
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE_HYSTERESIS(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOHCR &= (uint32_t)(~(__GX_IOY_MASK__)))
+
+/**
+ * @brief Open analog switch on a group of IOs
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_OPEN_ANALOG_SWITCH(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOASCR &= (uint32_t)(~(__GX_IOY_MASK__)))
+
+/**
+ * @brief Close analog switch on a group of IOs
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_CLOSE_ANALOG_SWITCH(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOASCR |= (__GX_IOY_MASK__))
+
+/**
+ * @brief Enable a group of IOs in channel mode
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE_CHANNEL(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOCCR |= (__GX_IOY_MASK__))
+
+/**
+ * @brief Disable a group of channel IOs
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE_CHANNEL(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOCCR &= (uint32_t)(~(__GX_IOY_MASK__)))
+
+/**
+ * @brief Enable a group of IOs in sampling mode
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE_SAMPLING(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOSCR |= (__GX_IOY_MASK__))
+
+/**
+ * @brief Disable a group of sampling IOs
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE_SAMPLING(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOSCR &= (uint32_t)(~(__GX_IOY_MASK__)))
+
+/**
+ * @brief Enable acquisition groups
+ * @param __HANDLE__: TSC handle
+ * @param __GX_MASK__: Groups mask
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE_GROUP(__HANDLE__, __GX_MASK__) ((__HANDLE__)->Instance->IOGCSR |= (__GX_MASK__))
+
+/**
+ * @brief Disable acquisition groups
+ * @param __HANDLE__: TSC handle
+ * @param __GX_MASK__: Groups mask
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE_GROUP(__HANDLE__, __GX_MASK__) ((__HANDLE__)->Instance->IOGCSR &= (uint32_t)(~(__GX_MASK__)))
+
+/** @brief Gets acquisition group status
+ * @param __HANDLE__: TSC Handle
+ * @param __GX_INDEX__: Group index
+ * @retval SET or RESET
+ */
+#define __HAL_TSC_GET_GROUP_STATUS(__HANDLE__, __GX_INDEX__) \
+((((__HANDLE__)->Instance->IOGCSR & (uint32_t)((uint32_t)1 << ((__GX_INDEX__) + (uint32_t)16))) == (uint32_t)((uint32_t)1 << ((__GX_INDEX__) + (uint32_t)16))) ? TSC_GROUP_COMPLETED : TSC_GROUP_ONGOING)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TSC_Exported_Functions TSC Exported Functions
+ * @{
+ */
+
+/** @addtogroup TSC_Exported_Functions_Group1 Initialization/de-initialization functions
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_TSC_Init(TSC_HandleTypeDef* htsc);
+HAL_StatusTypeDef HAL_TSC_DeInit(TSC_HandleTypeDef *htsc);
+void HAL_TSC_MspInit(TSC_HandleTypeDef* htsc);
+void HAL_TSC_MspDeInit(TSC_HandleTypeDef* htsc);
+/**
+ * @}
+ */
+
+/** @addtogroup TSC_Exported_Functions_Group2 IO operation functions
+ * @brief IO operation functions * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_TSC_Start(TSC_HandleTypeDef* htsc);
+HAL_StatusTypeDef HAL_TSC_Start_IT(TSC_HandleTypeDef* htsc);
+HAL_StatusTypeDef HAL_TSC_Stop(TSC_HandleTypeDef* htsc);
+HAL_StatusTypeDef HAL_TSC_Stop_IT(TSC_HandleTypeDef* htsc);
+TSC_GroupStatusTypeDef HAL_TSC_GroupGetStatus(TSC_HandleTypeDef* htsc, uint32_t gx_index);
+uint32_t HAL_TSC_GroupGetValue(TSC_HandleTypeDef* htsc, uint32_t gx_index);
+/**
+ * @}
+ */
+
+/** @addtogroup TSC_Exported_Functions_Group3 Peripheral Control functions
+ * @brief Peripheral Control functions
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_TSC_IOConfig(TSC_HandleTypeDef* htsc, TSC_IOConfigTypeDef* config);
+HAL_StatusTypeDef HAL_TSC_IODischarge(TSC_HandleTypeDef* htsc, uint32_t choice);
+/**
+ * @}
+ */
+
+/** @addtogroup TSC_Exported_Functions_Group4 State functions
+ * @brief State functions
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_TSC_StateTypeDef HAL_TSC_GetState(TSC_HandleTypeDef* htsc);
+HAL_StatusTypeDef HAL_TSC_PollForAcquisition(TSC_HandleTypeDef* htsc);
+void HAL_TSC_IRQHandler(TSC_HandleTypeDef* htsc);
+/**
+ * @}
+ */
+
+/** @addtogroup TSC_Exported_Functions_Group5 Callback functions
+ * @brief Callback functions
+ * @{
+ */
+/* Callback functions *********************************************************/
+void HAL_TSC_ConvCpltCallback(TSC_HandleTypeDef* htsc);
+void HAL_TSC_ErrorCallback(TSC_HandleTypeDef* htsc);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(STM32F051x8) || defined(STM32F071xB) || defined(STM32F091xC) || */
+ /* defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || */
+ /* defined(STM32F058xx) || defined(STM32F078xx) || defined(STM32F098xx) */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F0xx_TSC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_uart.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,934 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_uart.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of UART HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_UART_H
+#define __STM32F0xx_HAL_UART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup UART
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup UART_Exported_Types UART Exported Types
+ * @{
+ */
+
+
+/**
+ * @brief UART Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
+ The baud rate register is computed using the following formula:
+ - If oversampling is 16 or in LIN mode (LIN mode not available on F030xx devices),
+ Baud Rate Register = ((PCLKx) / ((huart->Init.BaudRate)))
+ - If oversampling is 8,
+ Baud Rate Register[15:4] = ((2 * PCLKx) / ((huart->Init.BaudRate)))[15:4]
+ Baud Rate Register[3] = 0
+ Baud Rate Register[2:0] = (((2 * PCLKx) / ((huart->Init.BaudRate)))[3:0]) >> 1 */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref UARTEx_Word_Length */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref UART_Stop_Bits */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref UART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref UART_Mode */
+
+ uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled
+ or disabled.
+ This parameter can be a value of @ref UART_Hardware_Flow_Control */
+
+ uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
+ This parameter can be a value of @ref UART_Over_Sampling */
+
+ uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected.
+ Selecting the single sample method increases the receiver tolerance to clock
+ deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */
+}UART_InitTypeDef;
+
+/**
+ * @brief UART Advanced Features initalization structure definition
+ */
+typedef struct
+{
+ uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several
+ Advanced Features may be initialized at the same time .
+ This parameter can be a value of @ref UART_Advanced_Features_Initialization_Type */
+
+ uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted.
+ This parameter can be a value of @ref UART_Tx_Inv */
+
+ uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted.
+ This parameter can be a value of @ref UART_Rx_Inv */
+
+ uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic
+ vs negative/inverted logic).
+ This parameter can be a value of @ref UART_Data_Inv */
+
+ uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped.
+ This parameter can be a value of @ref UART_Rx_Tx_Swap */
+
+ uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled.
+ This parameter can be a value of @ref UART_Overrun_Disable */
+
+ uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error.
+ This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error */
+
+ uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled.
+ This parameter can be a value of @ref UART_AutoBaudRate_Enable */
+
+ uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate
+ detection is carried out.
+ This parameter can be a value of @ref UARTEx_AutoBaud_Rate_Mode */
+
+ uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line.
+ This parameter can be a value of @ref UART_MSB_First */
+} UART_AdvFeatureInitTypeDef;
+
+/**
+ * @brief HAL UART State structures definition
+ */
+typedef enum
+{
+ HAL_UART_STATE_RESET = 0x00, /*!< Peripheral is not initialized */
+ HAL_UART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_UART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_UART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_UART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_UART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_UART_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_UART_STATE_ERROR = 0x04 /*!< Error */
+}HAL_UART_StateTypeDef;
+
+/**
+ * @brief UART clock sources definition
+ */
+typedef enum
+{
+ UART_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */
+ UART_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */
+ UART_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */
+ UART_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */
+ UART_CLOCKSOURCE_UNDEFINED = 0x10 /*!< undefined clock source */
+}UART_ClockSourceTypeDef;
+
+/**
+ * @brief UART handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /*!< UART registers base address */
+
+ UART_InitTypeDef Init; /*!< UART communication parameters */
+
+ UART_AdvFeatureInitTypeDef AdvancedInit; /*!< UART Advanced Features initialization parameters */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */
+
+ uint16_t TxXferSize; /*!< UART Tx Transfer size */
+
+ uint16_t TxXferCount; /*!< UART Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */
+
+ uint16_t RxXferSize; /*!< UART Rx Transfer size */
+
+ uint16_t RxXferCount; /*!< UART Rx Transfer Counter */
+
+ uint16_t Mask; /*!< UART Rx RDR register mask */
+
+ DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ HAL_UART_StateTypeDef State; /*!< UART communication state */
+
+ __IO uint32_t ErrorCode; /*!< UART Error code
+ This parameter can be a value of @ref UART_Error */
+
+}UART_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup UART_Exported_Constants UART Exported constants
+ * @{
+ */
+
+/** @defgroup UART_Error UART Error
+ * @{
+ */
+#define HAL_UART_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_UART_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */
+#define HAL_UART_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */
+#define HAL_UART_ERROR_FE ((uint32_t)0x00000004) /*!< frame error */
+#define HAL_UART_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */
+#define HAL_UART_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Stop_Bits UART Number of Stop Bits
+ * @{
+ */
+#define UART_STOPBITS_1 ((uint32_t)0x0000)
+#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+#define UART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
+#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
+ ((STOPBITS) == UART_STOPBITS_2) || \
+ ((STOPBITS) == UART_STOPBITS_1_5))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Parity UART Parity
+ * @{
+ */
+#define UART_PARITY_NONE ((uint32_t)0x0000)
+#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \
+ ((PARITY) == UART_PARITY_EVEN) || \
+ ((PARITY) == UART_PARITY_ODD))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
+ * @{
+ */
+#define UART_HWCONTROL_NONE ((uint32_t)0x0000)
+#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE)
+#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE)
+#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE))
+#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
+ (((CONTROL) == UART_HWCONTROL_NONE) || \
+ ((CONTROL) == UART_HWCONTROL_RTS) || \
+ ((CONTROL) == UART_HWCONTROL_CTS) || \
+ ((CONTROL) == UART_HWCONTROL_RTS_CTS))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Mode UART Transfer Mode
+ * @{
+ */
+#define UART_MODE_RX ((uint32_t)USART_CR1_RE)
+#define UART_MODE_TX ((uint32_t)USART_CR1_TE)
+#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_UART_MODE(MODE) ((((MODE) & (~((uint32_t)(UART_MODE_TX_RX)))) == (uint32_t)0x00) && ((MODE) != (uint32_t)0x00))
+/**
+ * @}
+ */
+
+ /** @defgroup UART_State UART State
+ * @{
+ */
+#define UART_STATE_DISABLE ((uint32_t)0x0000)
+#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE)
+#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \
+ ((STATE) == UART_STATE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Over_Sampling UART Over Sampling
+ * @{
+ */
+#define UART_OVERSAMPLING_16 ((uint32_t)0x0000)
+#define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8)
+#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \
+ ((SAMPLING) == UART_OVERSAMPLING_8))
+/**
+ * @}
+ */
+
+/** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method
+ * @{
+ */
+#define UART_ONEBIT_SAMPLING_DISABLED ((uint32_t)0x0000)
+#define UART_ONEBIT_SAMPLING_ENABLED ((uint32_t)USART_CR3_ONEBIT)
+#define IS_UART_ONEBIT_SAMPLING(ONEBIT) (((ONEBIT) == UART_ONEBIT_SAMPLING_DISABLED) || \
+ ((ONEBIT) == UART_ONEBIT_SAMPLING_ENABLED))
+/**
+ * @}
+ */
+
+
+/** @defgroup UART_Receiver_TimeOut UART Receiver TimeOut
+ * @{
+ */
+#define UART_RECEIVER_TIMEOUT_DISABLE ((uint32_t)0x00000000)
+#define UART_RECEIVER_TIMEOUT_ENABLE ((uint32_t)USART_CR2_RTOEN)
+#define IS_UART_RECEIVER_TIMEOUT(TIMEOUT) (((TIMEOUT) == UART_RECEIVER_TIMEOUT_DISABLE) || \
+ ((TIMEOUT) == UART_RECEIVER_TIMEOUT_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_One_Bit UART One Bit sampling
+ * @{
+ */
+#define UART_ONE_BIT_SAMPLE_DISABLED ((uint32_t)0x00000000)
+#define UART_ONE_BIT_SAMPLE_ENABLED ((uint32_t)USART_CR3_ONEBIT)
+#define IS_UART_ONEBIT_SAMPLE(ONEBIT) (((ONEBIT) == UART_ONE_BIT_SAMPLE_DISABLED) || \
+ ((ONEBIT) == UART_ONE_BIT_SAMPLE_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup UART_DMA_Tx UART DMA Tx
+ * @{
+ */
+#define UART_DMA_TX_DISABLE ((uint32_t)0x00000000)
+#define UART_DMA_TX_ENABLE ((uint32_t)USART_CR3_DMAT)
+#define IS_UART_DMA_TX(DMATX) (((DMATX) == UART_DMA_TX_DISABLE) || \
+ ((DMATX) == UART_DMA_TX_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_DMA_Rx UART DMA Rx
+ * @{
+ */
+#define UART_DMA_RX_DISABLE ((uint32_t)0x0000)
+#define UART_DMA_RX_ENABLE ((uint32_t)USART_CR3_DMAR)
+#define IS_UART_DMA_RX(DMARX) (((DMARX) == UART_DMA_RX_DISABLE) || \
+ ((DMARX) == UART_DMA_RX_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection
+ * @{
+ */
+#define UART_HALF_DUPLEX_DISABLE ((uint32_t)0x0000)
+#define UART_HALF_DUPLEX_ENABLE ((uint32_t)USART_CR3_HDSEL)
+#define IS_UART_HALF_DUPLEX(HDSEL) (((HDSEL) == UART_HALF_DUPLEX_DISABLE) || \
+ ((HDSEL) == UART_HALF_DUPLEX_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_WakeUp_Address_Length UART WakeUp Address Length
+ * @{
+ */
+#define UART_ADDRESS_DETECT_4B ((uint32_t)0x00000000)
+#define UART_ADDRESS_DETECT_7B ((uint32_t)USART_CR2_ADDM7)
+#define IS_UART_ADDRESSLENGTH_DETECT(ADDRESS) (((ADDRESS) == UART_ADDRESS_DETECT_4B) || \
+ ((ADDRESS) == UART_ADDRESS_DETECT_7B))
+/**
+ * @}
+ */
+
+/** @defgroup UART_WakeUp_Methods UART WakeUp Methods
+ * @{
+ */
+#define UART_WAKEUPMETHOD_IDLELINE ((uint32_t)0x00000000)
+#define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)USART_CR1_WAKE)
+#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \
+ ((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK))
+/**
+ * @}
+ */
+
+/** @defgroup UART_IT UART IT
+ * Elements values convention: 000000000XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * @{
+ */
+#define UART_IT_ERR ((uint16_t)0x0060)
+
+/** Elements values convention: 0000ZZZZ00000000b
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ */
+#define UART_IT_ORE ((uint16_t)0x0300)
+#define UART_IT_NE ((uint16_t)0x0200)
+#define UART_IT_FE ((uint16_t)0x0100)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type
+ * @{
+ */
+#define UART_ADVFEATURE_NO_INIT ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_TXINVERT_INIT ((uint32_t)0x00000001)
+#define UART_ADVFEATURE_RXINVERT_INIT ((uint32_t)0x00000002)
+#define UART_ADVFEATURE_DATAINVERT_INIT ((uint32_t)0x00000004)
+#define UART_ADVFEATURE_SWAP_INIT ((uint32_t)0x00000008)
+#define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT ((uint32_t)0x00000010)
+#define UART_ADVFEATURE_DMADISABLEONERROR_INIT ((uint32_t)0x00000020)
+#define UART_ADVFEATURE_AUTOBAUDRATE_INIT ((uint32_t)0x00000040)
+#define UART_ADVFEATURE_MSBFIRST_INIT ((uint32_t)0x00000080)
+#define IS_UART_ADVFEATURE_INIT(INIT) ((INIT) <= (UART_ADVFEATURE_NO_INIT | \
+ UART_ADVFEATURE_TXINVERT_INIT | \
+ UART_ADVFEATURE_RXINVERT_INIT | \
+ UART_ADVFEATURE_DATAINVERT_INIT | \
+ UART_ADVFEATURE_SWAP_INIT | \
+ UART_ADVFEATURE_RXOVERRUNDISABLE_INIT | \
+ UART_ADVFEATURE_DMADISABLEONERROR_INIT | \
+ UART_ADVFEATURE_AUTOBAUDRATE_INIT | \
+ UART_ADVFEATURE_MSBFIRST_INIT))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion
+ * @{
+ */
+#define UART_ADVFEATURE_TXINV_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_TXINV_ENABLE ((uint32_t)USART_CR2_TXINV)
+#define IS_UART_ADVFEATURE_TXINV(TXINV) (((TXINV) == UART_ADVFEATURE_TXINV_DISABLE) || \
+ ((TXINV) == UART_ADVFEATURE_TXINV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion
+ * @{
+ */
+#define UART_ADVFEATURE_RXINV_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_RXINV_ENABLE ((uint32_t)USART_CR2_RXINV)
+#define IS_UART_ADVFEATURE_RXINV(RXINV) (((RXINV) == UART_ADVFEATURE_RXINV_DISABLE) || \
+ ((RXINV) == UART_ADVFEATURE_RXINV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion
+ * @{
+ */
+#define UART_ADVFEATURE_DATAINV_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_DATAINV_ENABLE ((uint32_t)USART_CR2_DATAINV)
+#define IS_UART_ADVFEATURE_DATAINV(DATAINV) (((DATAINV) == UART_ADVFEATURE_DATAINV_DISABLE) || \
+ ((DATAINV) == UART_ADVFEATURE_DATAINV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap
+ * @{
+ */
+#define UART_ADVFEATURE_SWAP_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_SWAP_ENABLE ((uint32_t)USART_CR2_SWAP)
+#define IS_UART_ADVFEATURE_SWAP(SWAP) (((SWAP) == UART_ADVFEATURE_SWAP_DISABLE) || \
+ ((SWAP) == UART_ADVFEATURE_SWAP_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable
+ * @{
+ */
+#define UART_ADVFEATURE_OVERRUN_ENABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_OVERRUN_DISABLE ((uint32_t)USART_CR3_OVRDIS)
+#define IS_UART_OVERRUN(OVERRUN) (((OVERRUN) == UART_ADVFEATURE_OVERRUN_ENABLE) || \
+ ((OVERRUN) == UART_ADVFEATURE_OVERRUN_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable
+ * @{
+ */
+#define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE ((uint32_t)USART_CR2_ABREN)
+#define IS_UART_ADVFEATURE_AUTOBAUDRATE(AUTOBAUDRATE) (((AUTOBAUDRATE) == UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \
+ ((AUTOBAUDRATE) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error
+ * @{
+ */
+#define UART_ADVFEATURE_DMA_ENABLEONRXERROR ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_DMA_DISABLEONRXERROR ((uint32_t)USART_CR3_DDRE)
+#define IS_UART_ADVFEATURE_DMAONRXERROR(DMA) (((DMA) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) || \
+ ((DMA) == UART_ADVFEATURE_DMA_DISABLEONRXERROR))
+/**
+ * @}
+ */
+
+/** @defgroup UART_MSB_First UART Advanced Feature MSB First
+ * @{
+ */
+#define UART_ADVFEATURE_MSBFIRST_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_MSBFIRST_ENABLE ((uint32_t)USART_CR2_MSBFIRST)
+#define IS_UART_ADVFEATURE_MSBFIRST(MSBFIRST) (((MSBFIRST) == UART_ADVFEATURE_MSBFIRST_DISABLE) || \
+ ((MSBFIRST) == UART_ADVFEATURE_MSBFIRST_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable
+ * @{
+ */
+#define UART_ADVFEATURE_MUTEMODE_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_MUTEMODE_ENABLE ((uint32_t)USART_CR1_MME)
+#define IS_UART_MUTE_MODE(MUTE) (((MUTE) == UART_ADVFEATURE_MUTEMODE_DISABLE) || \
+ ((MUTE) == UART_ADVFEATURE_MUTEMODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register
+ * @{
+ */
+#define UART_CR2_ADDRESS_LSB_POS ((uint32_t) 24)
+/**
+ * @}
+ */
+
+/** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity
+ * @{
+ */
+#define UART_DE_POLARITY_HIGH ((uint32_t)0x00000000)
+#define UART_DE_POLARITY_LOW ((uint32_t)USART_CR3_DEP)
+#define IS_UART_DE_POLARITY(POLARITY) (((POLARITY) == UART_DE_POLARITY_HIGH) || \
+ ((POLARITY) == UART_DE_POLARITY_LOW))
+/**
+ * @}
+ */
+
+/** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register
+ * @{
+ */
+#define UART_CR1_DEAT_ADDRESS_LSB_POS ((uint32_t) 21)
+/**
+ * @}
+ */
+
+/** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register
+ * @{
+ */
+#define UART_CR1_DEDT_ADDRESS_LSB_POS ((uint32_t) 16)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask
+ * @{
+ */
+#define UART_IT_MASK ((uint32_t)0x001F)
+/**
+ * @}
+ */
+
+/** @defgroup UART_TimeOut_Value UART polling-based communications time-out value
+ * @{
+ */
+#define HAL_UART_TIMEOUT_VALUE 0x1FFFFFF
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup UART_Exported_Macros UART Exported Macros
+ * @{
+ */
+
+/** @brief Reset UART handle state
+ * @param __HANDLE__: UART handle.
+ * @retval None
+ */
+#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_UART_STATE_RESET)
+
+/** @brief Checks whether the specified UART flag is set or not.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3 or 4 to select the USART or
+ * UART peripheral (datasheet: up to four USART/UARTs)
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg UART_FLAG_REACK: Receive enable ackowledge flag
+ * @arg UART_FLAG_TEACK: Transmit enable ackowledge flag
+ * @arg UART_FLAG_WUF: Wake up from stop mode flag (not available on F030xx devices)
+ * @arg UART_FLAG_RWU: Receiver wake up flag (not available on F030xx devices)
+ * @arg UART_FLAG_SBKF: Send Break flag
+ * @arg UART_FLAG_CMF: Character match flag
+ * @arg UART_FLAG_BUSY: Busy flag
+ * @arg UART_FLAG_ABRF: Auto Baud rate detection flag
+ * @arg UART_FLAG_ABRE: Auto Baud rate detection error flag
+ * @arg UART_FLAG_EOBF: End of block flag (not available on F030xx devices)
+ * @arg UART_FLAG_RTOF: Receiver timeout flag
+ * @arg UART_FLAG_CTS: CTS Change flag
+ * @arg UART_FLAG_LBD: LIN Break detection flag (not available on F030xx devices)
+ * @arg UART_FLAG_TXE: Transmit data register empty flag
+ * @arg UART_FLAG_TC: Transmission Complete flag
+ * @arg UART_FLAG_RXNE: Receive data register not empty flag
+ * @arg UART_FLAG_IDLE: Idle Line detection flag
+ * @arg UART_FLAG_ORE: OverRun Error flag
+ * @arg UART_FLAG_NE: Noise Error flag
+ * @arg UART_FLAG_FE: Framing Error flag
+ * @arg UART_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Enables the specified UART interrupt.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3 or 4 to select the USART or
+ * UART peripheral. (datasheet: up to four USART/UARTs)
+ * @param __INTERRUPT__: specifies the UART interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_WUF: Wakeup from stop mode interrupt (not available on F030xx devices)
+ * @arg UART_IT_CM: Character match interrupt
+ * @arg UART_IT_CTS: CTS change interrupt
+ * @arg UART_IT_LBD: LIN Break detection interrupt (not available on F030xx devices)
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))))
+
+
+/** @brief Disables the specified UART interrupt.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3 or 4 to select the USART or
+ * UART peripheral. (datasheet: up to four USART/UARTs)
+ * @param __INTERRUPT__: specifies the UART interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_WUF: Wakeup from stop mode interrupt (not available on F030xx devices)
+ * @arg UART_IT_CM: Character match interrupt
+ * @arg UART_IT_CTS: CTS change interrupt
+ * @arg UART_IT_LBD: LIN Break detection interrupt (not available on F030xx devices)
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))))
+
+/** @brief Checks whether the specified UART interrupt has occurred or not.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3 or 4 to select the USART or
+ * UART peripheral. (datasheet: up to four USART/UARTs)
+ * @param __IT__: specifies the UART interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_WUF: Wakeup from stop mode interrupt (not available on F030xx devices)
+ * @arg UART_IT_CM: Character match interrupt
+ * @arg UART_IT_CTS: CTS change interrupt
+ * @arg UART_IT_LBD: LIN Break detection interrupt (not available on F030xx devices)
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_ORE: OverRun Error interrupt
+ * @arg UART_IT_NE: Noise Error interrupt
+ * @arg UART_IT_FE: Framing Error interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_UART_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08)))
+
+/** @brief Checks whether the specified UART interrupt source is enabled.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3 or 4 to select the USART or
+ * UART peripheral. (datasheet: up to four USART/UARTs)
+ * @param __IT__: specifies the UART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_WUF: Wakeup from stop mode interrupt (not available on F030xx devices)
+ * @arg UART_IT_CM: Character match interrupt
+ * @arg UART_IT_CTS: CTS change interrupt
+ * @arg UART_IT_LBD: LIN Break detection interrupt (not available on F030xx devices)
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_ORE: OverRun Error interrupt
+ * @arg UART_IT_NE: Noise Error interrupt
+ * @arg UART_IT_FE: Framing Error interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5U) == 2)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & UART_IT_MASK)))
+
+/** @brief Clears the specified UART ISR flag, in setting the proper ICR register flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3 or 4 to select the USART or
+ * UART peripheral. (datasheet: up to four USART/UARTs)
+ * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+ * to clear the corresponding interrupt
+ * This parameter can be one of the following values:
+ * @arg UART_CLEAR_PEF: Parity Error Clear Flag
+ * @arg UART_CLEAR_FEF: Framing Error Clear Flag
+ * @arg UART_CLEAR_NEF: Noise detected Clear Flag
+ * @arg UART_CLEAR_OREF: OverRun Error Clear Flag
+ * @arg UART_CLEAR_IDLEF: IDLE line detected Clear Flag
+ * @arg UART_CLEAR_TCF: Transmission Complete Clear Flag
+ * @arg UART_CLEAR_LBDF: LIN Break Detection Clear Flag (not available on F030xx devices)
+ * @arg UART_CLEAR_CTSF: CTS Interrupt Clear Flag
+ * @arg UART_CLEAR_RTOF: Receiver Time Out Clear Flag
+ * @arg UART_CLEAR_EOBF: End Of Block Clear Flag (not available on F030xx devices)
+ * @arg UART_CLEAR_CMF: Character Match Clear Flag
+ * @arg UART_CLEAR_WUF: Wake Up from stop mode Clear Flag (not available on F030xx devices)
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
+
+/** @brief Set a specific UART request flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3 or 4 to select the USART or
+ * UART peripheral. (datasheet: up to four USART/UARTs)
+ * @param __REQ__: specifies the request flag to set
+ * This parameter can be one of the following values:
+ * @arg UART_AUTOBAUD_REQUEST: Auto-Baud Rate Request
+ * @arg UART_SENDBREAK_REQUEST: Send Break Request
+ * @arg UART_MUTE_MODE_REQUEST: Mute Mode Request
+ * @arg UART_RXDATA_FLUSH_REQUEST: Receive Data flush Request
+ * @arg UART_TXDATA_FLUSH_REQUEST: Transmit data flush Request (not available on F030xx devices)
+ * @retval None
+ */
+#define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
+
+/** @brief Enable UART
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4 or 5 to select the UART peripheral
+ * @retval None
+ */
+#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable UART
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4 or 5 to select the UART peripheral
+ * @retval None
+ */
+#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/**
+ * @}
+ */
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup UART_Private_Macros UART Private Macros
+ * @{
+ */
+
+/** @brief BRR division operation to set BRR register in 8-bit oversampling mode
+ * @param _PCLK_: UART clock
+ * @param _BAUD_: Baud rate set by the user
+ * @retval Division result
+ */
+#define __DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*2)/((_BAUD_)))
+
+/** @brief BRR division operation to set BRR register in 16-bit oversampling mode
+ * @param _PCLK_: UART clock
+ * @param _BAUD_: Baud rate set by the user
+ * @retval Division result
+ */
+#define __DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_))/((_BAUD_)))
+
+/** @brief Check UART Baud rate
+ * @param BAUDRATE: Baudrate specified by the user
+ * The maximum Baud Rate is derived from the maximum clock on F0 (i.e. 48 MHz)
+ * divided by the smallest oversampling used on the USART (i.e. 8)
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 9000001)
+
+/** @brief Check UART assertion time
+ * @param TIME: 5-bit value assertion time
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_UART_ASSERTIONTIME(TIME) ((TIME) <= 0x1F)
+
+/** @brief Check UART deassertion time
+ * @param TIME: 5-bit value deassertion time
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_UART_DEASSERTIONTIME(TIME) ((TIME) <= 0x1F)
+
+/**
+ * @}
+ */
+
+/* Include UART HAL Extension module */
+#include "stm32f0xx_hal_uart_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup UART_Exported_Functions UART Exported Functions
+ * @{
+ */
+
+/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
+HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart);
+void HAL_UART_MspInit(UART_HandleTypeDef *huart);
+void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
+
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
+void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
+
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+
+/* Peripheral Control functions ***********************************************/
+void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
+
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Errors functions
+ * @{
+ */
+
+/* Peripheral State and Errors functions **************************************************/
+HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
+uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Private_Functions
+ * @{
+ */
+void UART_AdvFeatureConfig(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_UART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_uart_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,770 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_uart_ex.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of UART HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_UART_EX_H
+#define __STM32F0xx_HAL_UART_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup UARTEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+/** @defgroup UARTEx_Exported_Types UARTEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief UART wake up from stop mode parameters
+ */
+typedef struct
+{
+ uint32_t WakeUpEvent; /*!< Specifies which event will activat the Wakeup from Stop mode flag (WUF).
+ This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection.
+ If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must
+ be filled up. */
+
+ uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long.
+ This parameter can be a value of @ref UART_WakeUp_Address_Length */
+
+ uint8_t Address; /*!< UART/USART node address (7-bit long max) */
+} UART_WakeUpTypeDef;
+/**
+ * @}
+ */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants
+ * @{
+ */
+
+/** @defgroup UARTEx_Word_Length UARTEx Word Length
+ * @{
+ */
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
+#define UART_WORDLENGTH_7B ((uint32_t)USART_CR1_M1)
+#define UART_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
+#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_7B) || \
+ ((LENGTH) == UART_WORDLENGTH_8B) || \
+ ((LENGTH) == UART_WORDLENGTH_9B))
+#else
+#define UART_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \
+ ((LENGTH) == UART_WORDLENGTH_9B))
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
+/**
+ * @}
+ */
+
+/** @defgroup UARTEx_AutoBaud_Rate_Mode UARTEx Advanced Feature AutoBaud Rate Mode
+ * @{
+ */
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x0000)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME ((uint32_t)USART_CR2_ABRMODE_1)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME ((uint32_t)USART_CR2_ABRMODE)
+#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(MODE) (((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \
+ ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \
+ ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \
+ ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME))
+#else
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x0000)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0)
+#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(MODE) (((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \
+ ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE))
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
+/**
+ * @}
+ */
+
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+/** @defgroup UARTEx_LIN UARTEx Local Interconnection Network mode
+ * @{
+ */
+#define UART_LIN_DISABLE ((uint32_t)0x00000000)
+#define UART_LIN_ENABLE ((uint32_t)USART_CR2_LINEN)
+#define IS_UART_LIN(LIN) (((LIN) == UART_LIN_DISABLE) || \
+ ((LIN) == UART_LIN_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UARTEx_LIN_Break_Detection UARTEx LIN Break Detection
+ * @{
+ */
+#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000)
+#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL)
+#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
+ ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
+/**
+ * @}
+ */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+
+/** @defgroup UART_Flags UARTEx Status Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the ISR register
+ * @{
+ */
+#define UART_FLAG_REACK ((uint32_t)0x00400000)
+#define UART_FLAG_TEACK ((uint32_t)0x00200000)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+#define UART_FLAG_WUF ((uint32_t)0x00100000)
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+#define UART_FLAG_RWU ((uint32_t)0x00080000)
+#define UART_FLAG_SBKF ((uint32_t)0x00040000
+#define UART_FLAG_CMF ((uint32_t)0x00020000)
+#define UART_FLAG_BUSY ((uint32_t)0x00010000)
+#define UART_FLAG_ABRF ((uint32_t)0x00008000)
+#define UART_FLAG_ABRE ((uint32_t)0x00004000)
+#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#define UART_FLAG_EOBF ((uint32_t)0x00001000)
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#define UART_FLAG_RTOF ((uint32_t)0x00000800)
+#define UART_FLAG_CTS ((uint32_t)0x00000400)
+#define UART_FLAG_CTSIF ((uint32_t)0x00000200)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+#define UART_FLAG_LBDF ((uint32_t)0x00000100)
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+#define UART_FLAG_TXE ((uint32_t)0x00000080)
+#define UART_FLAG_TC ((uint32_t)0x00000040)
+#define UART_FLAG_RXNE ((uint32_t)0x00000020)
+#define UART_FLAG_IDLE ((uint32_t)0x00000010)
+#define UART_FLAG_ORE ((uint32_t)0x00000008)
+#define UART_FLAG_NE ((uint32_t)0x00000004)
+#define UART_FLAG_FE ((uint32_t)0x00000002)
+#define UART_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Interrupt_definition UARTEx Interrupts Definition
+ * Elements values convention: 0000ZZZZZ0XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * - ZZZZZ : Flag position in the ISR register(5bits)
+ * @{
+ */
+#define UART_IT_PE ((uint16_t)0x0028)
+#define UART_IT_TXE ((uint16_t)0x0727)
+#define UART_IT_TC ((uint16_t)0x0626)
+#define UART_IT_RXNE ((uint16_t)0x0525)
+#define UART_IT_IDLE ((uint16_t)0x0424)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+#define UART_IT_LBD ((uint16_t)0x0846)
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+#define UART_IT_CTS ((uint16_t)0x096A)
+#define UART_IT_CM ((uint16_t)0x112E)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+#define UART_IT_WUF ((uint16_t)0x1476)
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+/**
+ * @}
+ */
+
+
+/** @defgroup UART_IT_CLEAR_Flags UARTEx Interruption Clear Flags
+ * @{
+ */
+#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
+#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
+#define UART_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
+#define UART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
+#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */
+#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag (not available on F030xx devices)*/
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */
+#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */
+#define UART_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */
+#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Request_Parameters UARTEx Request Parameters
+ * @{
+ */
+#define UART_AUTOBAUD_REQUEST ((uint32_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */
+#define UART_SENDBREAK_REQUEST ((uint32_t)USART_RQR_SBKRQ) /*!< Send Break Request */
+#define UART_MUTE_MODE_REQUEST ((uint32_t)USART_RQR_MMRQ) /*!< Mute Mode Request */
+#define UART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
+#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#define UART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
+#define IS_UART_REQUEST_PARAMETER(PARAM) (((PARAM) == UART_AUTOBAUD_REQUEST) || \
+ ((PARAM) == UART_SENDBREAK_REQUEST) || \
+ ((PARAM) == UART_MUTE_MODE_REQUEST) || \
+ ((PARAM) == UART_RXDATA_FLUSH_REQUEST) || \
+ ((PARAM) == UART_TXDATA_FLUSH_REQUEST))
+#else
+#define IS_UART_REQUEST_PARAMETER(PARAM) (((PARAM) == UART_AUTOBAUD_REQUEST) || \
+ ((PARAM) == UART_SENDBREAK_REQUEST) || \
+ ((PARAM) == UART_MUTE_MODE_REQUEST) || \
+ ((PARAM) == UART_RXDATA_FLUSH_REQUEST))
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+/**
+ * @}
+ */
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+/** @defgroup UART_Stop_Mode_Enable UARTEx Advanced Feature Stop Mode Enable
+ * @{
+ */
+#define UART_ADVFEATURE_STOPMODE_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_STOPMODE_ENABLE ((uint32_t)USART_CR1_UESM)
+#define IS_UART_ADVFEATURE_STOPMODE(STOPMODE) (((STOPMODE) == UART_ADVFEATURE_STOPMODE_DISABLE) || \
+ ((STOPMODE) == UART_ADVFEATURE_STOPMODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection
+ * @{
+ */
+#define UART_WAKEUP_ON_ADDRESS ((uint32_t)0x0000)
+#define UART_WAKEUP_ON_STARTBIT ((uint32_t)USART_CR3_WUS_1)
+#define UART_WAKEUP_ON_READDATA_NONEMPTY ((uint32_t)USART_CR3_WUS)
+#define IS_UART_WAKEUP_SELECTION(WAKE) (((WAKE) == UART_WAKEUP_ON_ADDRESS) || \
+ ((WAKE) == UART_WAKEUP_ON_STARTBIT) || \
+ ((WAKE) == UART_WAKEUP_ON_READDATA_NONEMPTY))
+/**
+ * @}
+ */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup UARTEx_Exported_Macros UARTEx Exported Macros
+ * @{
+ */
+
+/** @brief Reports the UART clock source.
+ * @param __HANDLE__: specifies the UART Handle
+ * @param __CLOCKSOURCE__ : output variable
+ * @retval UART clocking source, written in __CLOCKSOURCE__.
+ */
+
+
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } while(0)
+#elif defined (STM32F030x8) || defined (STM32F070x6) || \
+ defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F051x8) || defined (STM32F058xx)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F070xB)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F091xC) || defined (STM32F098xx)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART7) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART8) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F030xC)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+
+#endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */
+
+
+/** @brief Computes the UART mask to apply to retrieve the received data
+ * according to the word length and to the parity bits activation.
+ * If PCE = 1, the parity bit is not included in the data extracted
+ * by the reception API().
+ * This masking operation is not carried out in the case of
+ * DMA transfers.
+ * @param __HANDLE__: specifies the UART Handle
+ * @retval none
+ */
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
+#define __HAL_UART_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x003F ; \
+ } \
+ } \
+} while(0)
+#else
+#define __HAL_UART_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ } \
+} while(0)
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup UARTEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup UARTEx_Exported_Functions_Group1
+ * @brief Extended Initialization and Configuration Functions
+ * @{
+ */
+/* Initialization and de-initialization functions ****************************/
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
+HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t UART_DEPolarity, uint32_t UART_DEAssertionTime, uint32_t UART_DEDeassertionTime);
+HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
+/**
+ * @}
+ */
+
+/** @addtogroup UARTEx_Exported_Functions_Group2
+ * @brief Extended UART Interrupt handling function
+ * @{
+ */
+
+/* IO operation functions ***************************************************/
+void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
+void HAL_UART_WakeupCallback(UART_HandleTypeDef *huart);
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
+/**
+ * @}
+ */
+
+/** @addtogroup UARTEx_Exported_Functions_Group3
+ * @brief Extended Peripheral Control functions
+ * @{
+ */
+
+/* Peripheral Control functions **********************************************/
+HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength);
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6) && !defined(STM32F030xC)
+HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
+HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
+/**
+ * @}
+ */
+/* Peripheral State functions ************************************************/
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_UART_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_usart.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,595 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_usart.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of USART HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_USART_H
+#define __STM32F0xx_HAL_USART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup USART
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup USART_Exported_Types USART Exported Types
+ * @{
+ */
+
+
+/**
+ * @brief USART Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the Usart communication baud rate.
+ The baud rate is computed using the following formula:
+ Baud Rate Register = ((PCLKx) / ((huart->Init.BaudRate))) */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref USARTEx_Word_Length */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref USART_Stop_Bits */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref USART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref USART_Mode */
+
+ uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
+ This parameter can be a value of @ref USART_Clock_Polarity */
+
+ uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref USART_Clock_Phase */
+
+ uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref USART_Last_Bit */
+}USART_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_USART_STATE_RESET = 0x00, /*!< Peripheral is not initialized */
+ HAL_USART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_USART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_USART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_USART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_USART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission Reception process is ongoing */
+ HAL_USART_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_USART_STATE_ERROR = 0x04 /*!< Error */
+}HAL_USART_StateTypeDef;
+
+/**
+ * @brief USART clock sources definitions
+ */
+typedef enum
+{
+ USART_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */
+ USART_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */
+ USART_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */
+ USART_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */
+ USART_CLOCKSOURCE_UNDEFINED = 0x10 /*!< undefined clock source */
+}USART_ClockSourceTypeDef;
+
+/**
+ * @brief USART handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /*!< USART registers base address */
+
+ USART_InitTypeDef Init; /*!< USART communication parameters */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to USART Tx transfer Buffer */
+
+ uint16_t TxXferSize; /*!< USART Tx Transfer size */
+
+ uint16_t TxXferCount; /*!< USART Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /*!< Pointer to USART Rx transfer Buffer */
+
+ uint16_t RxXferSize; /*!< USART Rx Transfer size */
+
+ uint16_t RxXferCount; /*!< USART Rx Transfer Counter */
+
+ uint16_t Mask; /*!< USART Rx RDR register mask */
+
+ DMA_HandleTypeDef *hdmatx; /*!< USART Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< USART Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ HAL_USART_StateTypeDef State; /*!< USART communication state */
+
+ __IO uint32_t ErrorCode; /*!< USART Error code
+ This parameter can be a value of @ref USART_Error */
+
+}USART_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup USART_Exported_Constants USART Exported constants
+ * @{
+ */
+
+/** @defgroup USART_Error USART Error
+ * @{
+ */
+#define HAL_USART_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_USART_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */
+#define HAL_USART_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */
+#define HAL_USART_ERROR_FE ((uint32_t)0x00000004) /*!< frame error */
+#define HAL_USART_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */
+#define HAL_USART_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
+/** @defgroup USART_Stop_Bits USART Number of Stop Bits
+ * @{
+ */
+#define USART_STOPBITS_1 ((uint32_t)0x0000)
+#define USART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+#define USART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
+#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_STOPBITS_1) || \
+ ((STOPBITS) == USART_STOPBITS_1_5) || \
+ ((STOPBITS) == USART_STOPBITS_2))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Parity USART Parity
+ * @{
+ */
+#define USART_PARITY_NONE ((uint32_t)0x0000)
+#define USART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define USART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+#define IS_USART_PARITY(PARITY) (((PARITY) == USART_PARITY_NONE) || \
+ ((PARITY) == USART_PARITY_EVEN) || \
+ ((PARITY) == USART_PARITY_ODD))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Mode USART Mode
+ * @{
+ */
+#define USART_MODE_RX ((uint32_t)USART_CR1_RE)
+#define USART_MODE_TX ((uint32_t)USART_CR1_TE)
+#define USART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_USART_MODE(MODE) ((((MODE) & (uint32_t)0xFFFFFFF3) == 0x00) && ((MODE) != (uint32_t)0x00))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock USART Clock
+ * @{
+ */
+#define USART_CLOCK_DISABLED ((uint32_t)0x0000)
+#define USART_CLOCK_ENABLED ((uint32_t)USART_CR2_CLKEN)
+#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_CLOCK_DISABLED) || \
+ ((CLOCK) == USART_CLOCK_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Polarity USART Clock Polarity
+ * @{
+ */
+#define USART_POLARITY_LOW ((uint32_t)0x0000)
+#define USART_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL)
+#define IS_USART_POLARITY(CPOL) (((CPOL) == USART_POLARITY_LOW) || ((CPOL) == USART_POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Phase USART Clock Phase
+ * @{
+ */
+#define USART_PHASE_1EDGE ((uint32_t)0x0000)
+#define USART_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA)
+#define IS_USART_PHASE(CPHA) (((CPHA) == USART_PHASE_1EDGE) || ((CPHA) == USART_PHASE_2EDGE))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Last_Bit USART Last Bit
+ * @{
+ */
+#define USART_LASTBIT_DISABLE ((uint32_t)0x0000)
+#define USART_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL)
+#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LASTBIT_DISABLE) || \
+ ((LASTBIT) == USART_LASTBIT_ENABLE))
+/**
+ * @}
+ */
+
+
+/** @defgroup USART_Flags USART Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the ISR register
+ * @{
+ */
+#define USART_FLAG_REACK ((uint32_t)0x00400000)
+#define USART_FLAG_TEACK ((uint32_t)0x00200000)
+#define USART_FLAG_BUSY ((uint32_t)0x00010000)
+#define USART_FLAG_CTS ((uint32_t)0x00000400)
+#define USART_FLAG_CTSIF ((uint32_t)0x00000200)
+#define USART_FLAG_LBDF ((uint32_t)0x00000100)
+#define USART_FLAG_TXE ((uint32_t)0x00000080)
+#define USART_FLAG_TC ((uint32_t)0x00000040)
+#define USART_FLAG_RXNE ((uint32_t)0x00000020)
+#define USART_FLAG_IDLE ((uint32_t)0x00000010)
+#define USART_FLAG_ORE ((uint32_t)0x00000008)
+#define USART_FLAG_NE ((uint32_t)0x00000004)
+#define USART_FLAG_FE ((uint32_t)0x00000002)
+#define USART_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup USART_Interrupt_definition USART Interrupts Definition
+ * Elements values convention: 0000ZZZZ0XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ * @{
+ */
+
+#define USART_IT_PE ((uint16_t)0x0028)
+#define USART_IT_TXE ((uint16_t)0x0727)
+#define USART_IT_TC ((uint16_t)0x0626)
+#define USART_IT_RXNE ((uint16_t)0x0525)
+#define USART_IT_IDLE ((uint16_t)0x0424)
+#define USART_IT_ERR ((uint16_t)0x0060)
+
+#define USART_IT_ORE ((uint16_t)0x0300)
+#define USART_IT_NE ((uint16_t)0x0200)
+#define USART_IT_FE ((uint16_t)0x0100)
+/**
+ * @}
+ */
+
+/** @defgroup USART_IT_CLEAR_Flags USART Interruption Clear Flags
+ * @{
+ */
+#define USART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
+#define USART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
+#define USART_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
+#define USART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
+#define USART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */
+#define USART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
+#define USART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */
+/**
+ * @}
+ */
+
+/** @defgroup USART_Request_Parameters USART Request Parameters
+ * @{
+ */
+#define USART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
+#define USART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
+#define IS_USART_REQUEST_PARAMETER(PARAM) (((PARAM) == USART_RXDATA_FLUSH_REQUEST) || \
+ ((PARAM) == USART_TXDATA_FLUSH_REQUEST))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Interruption_Mask USART interruptions flag mask
+ * @{
+ */
+#define USART_IT_MASK ((uint16_t)0x001F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup USART_Exported_Macros USART Exported Macros
+ * @{
+ */
+
+
+/** @brief Reset USART handle state
+ * @param __HANDLE__: USART handle.
+ * @retval None
+ */
+#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_USART_STATE_RESET)
+
+/** @brief Checks whether the specified USART flag is set or not.
+ * @param __HANDLE__: specifies the USART Handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg USART_FLAG_REACK: Receive enable ackowledge flag
+ * @arg USART_FLAG_TEACK: Transmit enable ackowledge flag
+ * @arg USART_FLAG_BUSY: Busy flag
+ * @arg USART_FLAG_CTS: CTS Change flag
+ * @arg USART_FLAG_TXE: Transmit data register empty flag
+ * @arg USART_FLAG_TC: Transmission Complete flag
+ * @arg USART_FLAG_RXNE: Receive data register not empty flag
+ * @arg USART_FLAG_IDLE: Idle Line detection flag
+ * @arg USART_FLAG_ORE: OverRun Error flag
+ * @arg USART_FLAG_NE: Noise Error flag
+ * @arg USART_FLAG_FE: Framing Error flag
+ * @arg USART_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_USART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+
+/** @brief Enables the specified USART interrupt.
+ * @param __HANDLE__: specifies the USART Handle
+ * @param __INTERRUPT__: specifies the USART interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_USART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))))
+
+/** @brief Disables the specified USART interrupt.
+ * @param __HANDLE__: specifies the USART Handle.
+ * @param __INTERRUPT__: specifies the USART interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_USART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))))
+
+
+/** @brief Checks whether the specified USART interrupt has occurred or not.
+ * @param __HANDLE__: specifies the USART Handle
+ * @param __IT__: specifies the USART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ORE: OverRun Error interrupt
+ * @arg USART_IT_NE: Noise Error interrupt
+ * @arg USART_IT_FE: Framing Error interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_USART_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08)))
+
+/** @brief Checks whether the specified USART interrupt source is enabled.
+ * @param __HANDLE__: specifies the USART Handle.
+ * @param __IT__: specifies the USART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ORE: OverRun Error interrupt
+ * @arg USART_IT_NE: Noise Error interrupt
+ * @arg USART_IT_FE: Framing Error interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5) == 2)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << \
+ (((uint16_t)(__IT__)) & USART_IT_MASK)))
+
+
+/** @brief Clears the specified USART ISR flag, in setting the proper ICR register flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+ * to clear the corresponding interrupt
+ * This parameter can be one of the following values:
+ * @arg USART_CLEAR_PEF: Parity Error Clear Flag
+ * @arg USART_CLEAR_FEF: Framing Error Clear Flag
+ * @arg USART_CLEAR_NEF: Noise detected Clear Flag
+ * @arg USART_CLEAR_OREF: OverRun Error Clear Flag
+ * @arg USART_CLEAR_IDLEF: IDLE line detected Clear Flag
+ * @arg USART_CLEAR_TCF: Transmission Complete Clear Flag
+ * @arg USART_CLEAR_CTSF: CTS Interrupt Clear Flag
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
+
+/** @brief Set a specific USART request flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * @param __REQ__: specifies the request flag to set
+ * This parameter can be one of the following values:
+ * @arg USART_RXDATA_FLUSH_REQUEST: Receive Data flush Request
+ * @arg USART_TXDATA_FLUSH_REQUEST: Transmit data flush Request
+ *
+ * @retval None
+ */
+#define __HAL_USART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
+
+/** @brief Enable USART
+ * @param __HANDLE__: specifies the USART Handle.
+ * @retval None
+ */
+#define __HAL_USART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable USART
+ * @param __HANDLE__: specifies the USART Handle.
+ * @retval None
+ */
+#define __HAL_USART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/**
+ * @}
+ */
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup USART_Private_Macros USART Private Macros
+ * @{
+ */
+
+/** @brief Check USART Baud rate
+ * @param BAUDRATE: Baudrate specified by the user
+ * The maximum Baud Rate is derived from the maximum clock on F0 (i.e. 48 MHz)
+ * divided by the smallest oversampling used on the USART (i.e. 8)
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_USART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 9000001)
+/**
+ * @}
+ */
+
+/* Include USART HAL Extension module */
+#include "stm32f0xx_hal_usart_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup USART_Exported_Functions USART Exported Functions
+ * @{
+ */
+
+/** @addtogroup USART_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ******************************/
+HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspDeInit(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_CheckIdleState(USART_HandleTypeDef *husart);
+
+/**
+ * @}
+ */
+
+/** @addtogroup USART_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart);
+void HAL_USART_IRQHandler(USART_HandleTypeDef *husart);
+void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart);
+
+/**
+ * @}
+ */
+
+/* Peripheral Control functions ***********************************************/
+
+/** @addtogroup USART_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @{
+ */
+
+/* Peripheral State and Error functions ***************************************/
+HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart);
+uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_USART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_usart_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,503 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_usart_ex.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of USART HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_USART_EX_H
+#define __STM32F0xx_HAL_USART_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup USARTEx USARTEx Extended HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup USARTEx_Exported_Constants USARTEx Exported Constants
+ * @{
+ */
+
+/** @defgroup USARTEx_Word_Length USARTEx Word Length
+ * @{
+ */
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
+#define USART_WORDLENGTH_7B ((uint32_t)USART_CR1_M1)
+#define USART_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define USART_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
+#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WORDLENGTH_7B) || \
+ ((LENGTH) == USART_WORDLENGTH_8B) || \
+ ((LENGTH) == USART_WORDLENGTH_9B))
+#else
+#define USART_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define USART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WORDLENGTH_8B) || \
+ ((LENGTH) == USART_WORDLENGTH_9B))
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || defined (STM32F070xB) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup USARTEx_Exported_Macros USARTEx Exported Macros
+ * @{
+ */
+
+/** @brief Reports the USART clock source.
+ * @param __HANDLE__: specifies the USART Handle
+ * @param __CLOCKSOURCE__ : output variable
+ * @retval the USART clocking source, written in __CLOCKSOURCE__.
+ */
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx)
+#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } while(0)
+#elif defined (STM32F030x8) || defined (STM32F070x6) || \
+ defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F051x8) || defined (STM32F058xx)
+#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined (STM32F070xB)
+#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F091xC) || defined (STM32F098xx)
+#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART7) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART8) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F030xC)
+#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */
+
+
+/** @brief Reports the USART mask to apply to retrieve the received data
+ * according to the word length and to the parity bits activation.
+ * If PCE = 1, the parity bit is not included in the data extracted
+ * by the reception API().
+ * This masking operation is not carried out in the case of
+ * DMA transfers.
+ * @param __HANDLE__: specifies the USART Handle
+ * @retval none
+ */
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
+#define __HAL_USART_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_7B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x003F ; \
+ } \
+ } \
+} while(0)
+#else
+#define __HAL_USART_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ } \
+} while(0)
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions ****************************/
+/* I/O operation functions ***************************************************/
+/* Peripheral Control functions **********************************************/
+/* Peripheral State functions ************************************************/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_USART_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/stm32f0xx_hal_wwdg.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,334 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_wwdg.h
+ * @author MCD Application Team
+ * @version V1.2.0
+ * @date 11-December-2014
+ * @brief Header file of WWDG HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_WWDG_H
+#define __STM32F0xx_HAL_WWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup WWDG
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup WWDG_Exported_Types WWDG Exported Types
+ * @{
+ */
+
+/**
+ * @brief WWDG HAL State Structure definition
+ */
+typedef enum
+{
+ HAL_WWDG_STATE_RESET = 0x00, /*!< WWDG not yet initialized or disabled */
+ HAL_WWDG_STATE_READY = 0x01, /*!< WWDG initialized and ready for use */
+ HAL_WWDG_STATE_BUSY = 0x02, /*!< WWDG internal process is ongoing */
+ HAL_WWDG_STATE_TIMEOUT = 0x03, /*!< WWDG timeout state */
+ HAL_WWDG_STATE_ERROR = 0x04 /*!< WWDG error state */
+}HAL_WWDG_StateTypeDef;
+
+/**
+ * @brief WWDG Init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the prescaler value of the WWDG.
+ This parameter can be a value of @ref WWDG_Prescaler */
+
+ uint32_t Window; /*!< Specifies the WWDG window value to be compared to the downcounter.
+ This parameter must be a number lower than Max_Data = 0x80 */
+
+ uint32_t Counter; /*!< Specifies the WWDG free-running downcounter value.
+ This parameter must be a number between Min_Data = 0x40 and Max_Data = 0x7F */
+
+} WWDG_InitTypeDef;
+
+/**
+ * @brief WWDG handle Structure definition
+ */
+typedef struct
+{
+ WWDG_TypeDef *Instance; /*!< Register base address */
+
+ WWDG_InitTypeDef Init; /*!< WWDG required parameters */
+
+ HAL_LockTypeDef Lock; /*!< WWDG locking object */
+
+ __IO HAL_WWDG_StateTypeDef State; /*!< WWDG communication state */
+
+} WWDG_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup WWDG_Exported_Constants WWDG Exported Constants
+ * @{
+ */
+
+/** @defgroup WWDG_Interrupt_definition WWDG Interrupt definition
+ * @{
+ */
+#define WWDG_IT_EWI WWDG_CFR_EWI /*!< Early wakeup interrupt */
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Flag_definition WWDG Flag definition
+ * @brief WWDG Flag definition
+ * @{
+ */
+#define WWDG_FLAG_EWIF WWDG_SR_EWIF /*!< Early wakeup interrupt flag */
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Prescaler WWDG Prescaler
+ * @{
+ */
+#define WWDG_PRESCALER_1 ((uint32_t)0x00000000) /*!< WWDG counter clock = (PCLK1/4096)/1 */
+#define WWDG_PRESCALER_2 WWDG_CFR_WDGTB0 /*!< WWDG counter clock = (PCLK1/4096)/2 */
+#define WWDG_PRESCALER_4 WWDG_CFR_WDGTB1 /*!< WWDG counter clock = (PCLK1/4096)/4 */
+#define WWDG_PRESCALER_8 WWDG_CFR_WDGTB /*!< WWDG counter clock = (PCLK1/4096)/8 */
+
+#define IS_WWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == WWDG_PRESCALER_1) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_2) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_4) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_8))
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Window WWDG Window
+ * @{
+ */
+#define IS_WWDG_WINDOW(__WINDOW__) ((__WINDOW__) <= 0x7F)
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Counter WWDG Counter
+ * @{
+ */
+#define IS_WWDG_COUNTER(__COUNTER__) (((__COUNTER__) >= 0x40) && ((__COUNTER__) <= 0x7F))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup WWDG_Exported_Macros WWDG Exported Macros
+ * @{
+ */
+
+/** @brief Reset WWDG handle state
+ * @param __HANDLE__: WWDG handle
+ * @retval None
+ */
+#define __HAL_WWDG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_WWDG_STATE_RESET)
+
+/**
+ * @brief Enables the WWDG peripheral.
+ * @param __HANDLE__: WWDG handle
+ * @retval None
+ */
+#define __HAL_WWDG_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= WWDG_CR_WDGA)
+
+/**
+ * @brief Disables the WWDG peripheral.
+ * @param __HANDLE__: WWDG handle
+ * @note WARNING: This is a dummy macro for HAL code alignment.
+ * Once enable, WWDG Peripheral cannot be disabled except by a system reset.
+ * @retval None
+ */
+#define __HAL_WWDG_DISABLE(__HANDLE__) /* dummy macro */
+
+/**
+ * @brief Enables the WWDG early wakeup interrupt.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the interrupt to enable.
+ * This parameter can be one of the following values:
+ * @arg WWDG_IT_EWI: Early wakeup interrupt
+ * @note Once enabled this interrupt cannot be disabled except by a system reset.
+ * @retval None
+ */
+#define __HAL_WWDG_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CFR |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the WWDG early wakeup interrupt.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the interrupt to disable.
+ * This parameter can be one of the following values:
+ * @arg WWDG_IT_EWI: Early wakeup interrupt
+ * @note WARNING: This is a dummy macro for HAL code alignment.
+ * Once enabled this interrupt cannot be disabled except by a system reset.
+ * @retval None
+ */
+#define __HAL_WWDG_DISABLE_IT(__HANDLE__, __INTERRUPT__) /* dummy macro */
+
+/**
+ * @brief Gets the selected WWDG's it status.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the it to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt IT
+ * @retval The new state of WWDG_FLAG (SET or RESET).
+ */
+#define __HAL_WWDG_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/** @brief Clear the WWDG's interrupt pending bits
+ * bits to clear the selected interrupt pending bits.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ */
+#define __HAL_WWDG_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
+
+/**
+ * @brief Gets the selected WWDG's flag status.
+ * @param __HANDLE__: WWDG handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ * @retval The new state of WWDG_FLAG (SET or RESET).
+ */
+#define __HAL_WWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clears the WWDG's pending flags.
+ * @param __HANDLE__: WWDG handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ * @retval None
+ */
+#define __HAL_WWDG_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief Checks if the specified WWDG interrupt source is enabled or disabled.
+ * @param __HANDLE__: WWDG Handle.
+ * @param __INTERRUPT__: specifies the WWDG interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_IT_EWI: Early Wakeup Interrupt
+ * @retval state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_WWDG_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CFR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup WWDG_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup WWDG_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg);
+HAL_StatusTypeDef HAL_WWDG_DeInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_MspDeInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_WakeupCallback(WWDG_HandleTypeDef* hwwdg);
+
+/**
+ * @}
+ */
+
+/** @addtogroup WWDG_Exported_Functions_Group2
+ * @{
+ */
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_WWDG_Start(WWDG_HandleTypeDef *hwwdg);
+HAL_StatusTypeDef HAL_WWDG_Start_IT(WWDG_HandleTypeDef *hwwdg);
+HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg, uint32_t Counter);
+void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg);
+
+/**
+ * @}
+ */
+
+/** @addtogroup WWDG_Exported_Functions_Group3
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+HAL_WWDG_StateTypeDef HAL_WWDG_GetState(WWDG_HandleTypeDef *hwwdg);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_WWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F070RB/system_stm32f0xx.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,123 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f0xx.h
+ * @author MCD Application Team
+ * @version V2.2.0
+ * @date 05-December-2014
+ * @brief CMSIS Cortex-M0 Device System Source File for STM32F0xx devices.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f0xx_system
+ * @{
+ */
+
+/**
+ * @brief Define to prevent recursive inclusion
+ */
+#ifndef __SYSTEM_STM32F0XX_H
+#define __SYSTEM_STM32F0XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32F0xx_System_Includes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup STM32F0xx_System_Exported_types
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 3) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) by calling HAL API function HAL_RCC_ClockConfig()
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Exported_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F0xx_System_Exported_Functions
+ * @{
+ */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+extern void SetSysClock(void);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F0XX_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_F072RB/TARGET_STM/TARGET_NUCLEO_F072RB/PeripheralPins.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,66 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_PERIPHERALPINS_H +#define MBED_PERIPHERALPINS_H + +#include "pinmap.h" +#include "PeripheralNames.h" + +//*** ADC *** + +extern const PinMap PinMap_ADC[]; + +//*** DAC *** + +extern const PinMap PinMap_DAC[]; + +//*** I2C *** + +extern const PinMap PinMap_I2C_SDA[]; +extern const PinMap PinMap_I2C_SCL[]; + +//*** PWM *** + +extern const PinMap PinMap_PWM[]; + +//*** SERIAL *** + +extern const PinMap PinMap_UART_TX[]; +extern const PinMap PinMap_UART_RX[]; + +//*** SPI *** + +extern const PinMap PinMap_SPI_MOSI[]; +extern const PinMap PinMap_SPI_MISO[]; +extern const PinMap PinMap_SPI_SCLK[]; +extern const PinMap PinMap_SPI_SSEL[]; + +#endif
--- a/TARGET_NUCLEO_F072RB/TARGET_STM/TARGET_NUCLEO_F072RB/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/TARGET_STM/TARGET_NUCLEO_F072RB/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -64,6 +64,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/startup_stm32f072xb.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_MICRO/system_stm32f0xx.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/startup_stm32f072xb.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_ARM_STD/system_stm32f0xx.o has changed
--- a/TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/NUCLEO_F072RB.ld Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,155 +0,0 @@
-/* Linker script to configure memory regions. */
-MEMORY
-{
- FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 128k
- RAM (xrw) : ORIGIN = 0x200000C0, LENGTH = 16k - 0x0C0
-}
-
-/* Linker script to place sections and symbol values. Should be used together
- * with other linker script that defines memory regions FLASH and RAM.
- * It references following symbols, which must be defined in code:
- * Reset_Handler : Entry of reset handler
- *
- * It defines following symbols, which code can use without definition:
- * __exidx_start
- * __exidx_end
- * __etext
- * __data_start__
- * __preinit_array_start
- * __preinit_array_end
- * __init_array_start
- * __init_array_end
- * __fini_array_start
- * __fini_array_end
- * __data_end__
- * __bss_start__
- * __bss_end__
- * __end__
- * end
- * __HeapLimit
- * __StackLimit
- * __StackTop
- * __stack
- * _estack
- */
-ENTRY(Reset_Handler)
-
-SECTIONS
-{
- .text :
- {
- KEEP(*(.isr_vector))
- *(.text*)
-
- KEEP(*(.init))
- KEEP(*(.fini))
-
- /* .ctors */
- *crtbegin.o(.ctors)
- *crtbegin?.o(.ctors)
- *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
- *(SORT(.ctors.*))
- *(.ctors)
-
- /* .dtors */
- *crtbegin.o(.dtors)
- *crtbegin?.o(.dtors)
- *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
- *(SORT(.dtors.*))
- *(.dtors)
-
- *(.rodata*)
-
- KEEP(*(.eh_frame*))
- } > FLASH
-
- .ARM.extab :
- {
- *(.ARM.extab* .gnu.linkonce.armextab.*)
- } > FLASH
-
- __exidx_start = .;
- .ARM.exidx :
- {
- *(.ARM.exidx* .gnu.linkonce.armexidx.*)
- } > FLASH
- __exidx_end = .;
-
- __etext = .;
- _sidata = .;
-
- .data : AT (__etext)
- {
- __data_start__ = .;
- _sdata = .;
- *(vtable)
- *(.data*)
-
- . = ALIGN(4);
- /* preinit data */
- PROVIDE_HIDDEN (__preinit_array_start = .);
- KEEP(*(.preinit_array))
- PROVIDE_HIDDEN (__preinit_array_end = .);
-
- . = ALIGN(4);
- /* init data */
- PROVIDE_HIDDEN (__init_array_start = .);
- KEEP(*(SORT(.init_array.*)))
- KEEP(*(.init_array))
- PROVIDE_HIDDEN (__init_array_end = .);
-
-
- . = ALIGN(4);
- /* finit data */
- PROVIDE_HIDDEN (__fini_array_start = .);
- KEEP(*(SORT(.fini_array.*)))
- KEEP(*(.fini_array))
- PROVIDE_HIDDEN (__fini_array_end = .);
-
- KEEP(*(.jcr*))
- . = ALIGN(4);
- /* All data end */
- __data_end__ = .;
- _edata = .;
-
- } > RAM
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start__ = .;
- _sbss = .;
- *(.bss*)
- *(COMMON)
- . = ALIGN(4);
- __bss_end__ = .;
- _ebss = .;
- } > RAM
-
- .heap (COPY):
- {
- __end__ = .;
- end = __end__;
- *(.heap*)
- __HeapLimit = .;
- } > RAM
-
- /* .stack_dummy section doesn't contains any symbols. It is only
- * used for linker to calculate size of stack sections, and assign
- * values to stack symbols later */
- .stack_dummy (COPY):
- {
- *(.stack*)
- } > RAM
-
- /* Set stack top to end of RAM, and stack limit move down by
- * size of stack_dummy section */
- __StackTop = ORIGIN(RAM) + LENGTH(RAM);
- _estack = __StackTop;
- __StackLimit = __StackTop - SIZEOF(.stack_dummy);
- PROVIDE(__stack = __StackTop);
-
- /* Check if data + heap + stack exceeds RAM limit */
- ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
-}
-
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/STM32F072XB.ld Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,153 @@
+/* Linker script to configure memory regions. */
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 128k
+ RAM (xrw) : ORIGIN = 0x200000C0, LENGTH = 16k - 0x0C0
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ * _estack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.isr_vector))
+ *(.text*)
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+ _sidata = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ _sdata = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ KEEP(*(.jcr*))
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+ _edata = .;
+
+ } > RAM
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start__ = .;
+ _sbss = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ _ebss = .;
+ } > RAM
+
+ .heap (COPY):
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy (COPY):
+ {
+ *(.stack*)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ _estack = __StackTop;
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/hal_tick.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_GCC_ARM/system_stm32f0xx.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/startup_stm32f072xb.o has changed
--- a/TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f072xb.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f072xb.icf Tue Feb 03 15:31:20 2015 +0000
@@ -15,8 +15,8 @@
define region RAM_region = mem:[from __region_RAM_start__ to __region_RAM_end__];
/* Stack and Heap */
-define symbol __size_cstack__ = 0x400;
-define symbol __size_heap__ = 0x400;
+define symbol __size_cstack__ = 0x800;
+define symbol __size_heap__ = 0x800;
define block CSTACK with alignment = 8, size = __size_cstack__ { };
define block HEAP with alignment = 8, size = __size_heap__ { };
define block STACKHEAP with fixed order { block HEAP, block CSTACK };
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F072RB/TOOLCHAIN_IAR/system_stm32f0xx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F072RB/hal_tick.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,60 @@
+/**
+ ******************************************************************************
+ * @file hal_tick.h
+ * @author MCD Application Team
+ * @brief Initialization of HAL tick
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#ifndef __HAL_TICK_H
+#define __HAL_TICK_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "stm32f0xx.h"
+#include "cmsis_nvic.h"
+
+#define TIM_MST TIM2
+#define TIM_MST_IRQ TIM2_IRQn
+#define TIM_MST_RCC __TIM2_CLK_ENABLE()
+
+#define TIM_MST_RESET_ON __TIM2_FORCE_RESET()
+#define TIM_MST_RESET_OFF __TIM2_RELEASE_RESET()
+
+#define HAL_TICK_DELAY (1000) // 1 ms
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __HAL_TICK_H
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- a/TARGET_NUCLEO_F072RB/stm32f072xb.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f072xb.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f072xb.h
* @author MCD Application Team
- * @version V2.1.0
- * @date 03-Oct-2014
+ * @version V2.2.0
+ * @date 05-December-2014
* @brief CMSIS STM32F072x8/STM32F072xB devices Peripheral Access Layer Header File.
*
* This file contains:
@@ -506,24 +506,15 @@
typedef struct
{
- __IO uint16_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */
- uint16_t RESERVED0; /*!< Reserved, 0x02 */
- __IO uint16_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
- uint16_t RESERVED1; /*!< Reserved, 0x06 */
- __IO uint16_t SR; /*!< SPI Status register, Address offset: 0x08 */
- uint16_t RESERVED2; /*!< Reserved, 0x0A */
- __IO uint16_t DR; /*!< SPI data register, Address offset: 0x0C */
- uint16_t RESERVED3; /*!< Reserved, 0x0E */
- __IO uint16_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
- uint16_t RESERVED4; /*!< Reserved, 0x12 */
- __IO uint16_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */
- uint16_t RESERVED5; /*!< Reserved, 0x16 */
- __IO uint16_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */
- uint16_t RESERVED6; /*!< Reserved, 0x1A */
- __IO uint16_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
- uint16_t RESERVED7; /*!< Reserved, 0x1E */
- __IO uint16_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
- uint16_t RESERVED8; /*!< Reserved, 0x22 */
+ __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
}SPI_TypeDef;
/**
@@ -5237,14 +5228,19 @@
((INSTANCE) == DMA1_Channel7))
/****************************** GPIO Instances ********************************/
-#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
- ((INSTANCE) == GPIOB) || \
- ((INSTANCE) == GPIOC) || \
- ((INSTANCE) == GPIOD) || \
- ((INSTANCE) == GPIOE) || \
- ((INSTANCE) == GPIOF))
-
-/****************************** GPIO Lock Instances ****************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOE) || \
+ ((INSTANCE) == GPIOF))
+
+#define IS_GPIO_AF_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOE))
+
#define IS_GPIO_LOCK_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
((INSTANCE) == GPIOB))
--- a/TARGET_NUCLEO_F072RB/stm32f0xx.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx.h
* @author MCD Application Team
- * @version V2.1.0
- * @date 03-Oct-2014
+ * @version V2.2.0
+ * @date 05-December-2014
* @brief CMSIS STM32F0xx Device Peripheral Access Layer Header File.
*
* The file is the unique include file that the application programmer
@@ -70,10 +70,10 @@
#if !defined (STM32F030x6) && !defined (STM32F030x8) && \
!defined (STM32F031x6) && !defined (STM32F038xx) && \
- !defined (STM32F042x6) && !defined (STM32F048xx) && \
+ !defined (STM32F042x6) && !defined (STM32F048xx) && !defined (STM32F070x6) && \
!defined (STM32F051x8) && !defined (STM32F058xx) && \
- !defined (STM32F071xB) && !defined (STM32F072xB) && !defined (STM32F078xx) && \
- !defined (STM32F091xC) && !defined (STM32F098xx)
+ !defined (STM32F071xB) && !defined (STM32F072xB) && !defined (STM32F078xx) && !defined (STM32F070xB) && \
+ !defined (STM32F091xC) && !defined (STM32F098xx) && !defined (STM32F030xC)
/* #define STM32F030x6 */ /*!< STM32F030x4, STM32F030x6 Devices (STM32F030xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
/* #define STM32F030x8 */ /*!< STM32F030x8 Devices (STM32F030xx microcontrollers where the Flash memory is 64 Kbytes) */
/* #define STM32F031x6 */ /*!< STM32F031x4, STM32F031x6 Devices (STM32F031xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
@@ -82,9 +82,12 @@
/* #define STM32F048x6 */ /*!< STM32F048xx Devices (STM32F042xx microcontrollers where the Flash memory is 32 Kbytes) */
/* #define STM32F051x8 */ /*!< STM32F051x4, STM32F051x6, STM32F051x8 Devices (STM32F051xx microcontrollers where the Flash memory ranges between 16 and 64 Kbytes) */
/* #define STM32F058xx */ /*!< STM32F058xx Devices (STM32F058xx microcontrollers where the Flash memory is 64 Kbytes) */
+ /* #define STM32F070x6 */ /*!< STM32F070x6 Devices (STM32F070x6 microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
+ /* #define STM32F070xB */ /*!< STM32F070xB Devices (STM32F070xB microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */
/* #define STM32F071xB */ /*!< STM32F071x8, STM32F071xB Devices (STM32F071xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */
#define STM32F072xB /*!< STM32F072x8, STM32F072xB Devices (STM32F072xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */
/* #define STM32F078xx */ /*!< STM32F078xx Devices (STM32F078xx microcontrollers where the Flash memory is 128 Kbytes) */
+ /* #define STM32F030xC */ /*!< STM32F030xC Devices (STM32F030xC microcontrollers where the Flash memory is 256 Kbytes) */
/* #define STM32F091xC */ /*!< STM32F091xC Devices (STM32F091xx microcontrollers where the Flash memory is 256 Kbytes) */
/* #define STM32F098xx */ /*!< STM32F098xx Devices (STM32F098xx microcontrollers where the Flash memory is 256 Kbytes) */
#endif
@@ -102,10 +105,10 @@
#endif /* USE_HAL_DRIVER */
/**
- * @brief CMSIS Device version number V2.1.0
+ * @brief CMSIS Device version number V2.2.0
*/
#define __STM32F0xx_CMSIS_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */
-#define __STM32F0xx_CMSIS_DEVICE_VERSION_SUB1 (0x01) /*!< [23:16] sub1 version */
+#define __STM32F0xx_CMSIS_DEVICE_VERSION_SUB1 (0x02) /*!< [23:16] sub1 version */
#define __STM32F0xx_CMSIS_DEVICE_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
#define __STM32F0xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */
#define __STM32F0xx_CMSIS_DEVICE_VERSION ((__CMSIS_DEVICE_VERSION_MAIN << 24)\
@@ -137,6 +140,10 @@
#include "stm32f051x8.h"
#elif defined(STM32F058xx)
#include "stm32f058xx.h"
+#elif defined(STM32F070x6)
+ #include "stm32f070x6.h"
+#elif defined(STM32F070xB)
+ #include "stm32f070xb.h"
#elif defined(STM32F071xB)
#include "stm32f071xb.h"
#elif defined(STM32F072xB)
@@ -146,7 +153,9 @@
#elif defined(STM32F091xC)
#include "stm32f091xc.h"
#elif defined(STM32F098xx)
- #include "stm32f098xx.h"
+ #include "stm32f098xx.h"
+#elif defined(STM32F030xC)
+ #include "stm32f030xc.h"
#else
#error "Please select first the target STM32F0xx device used in your application (in stm32f0xx.h file)"
#endif
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief This file contains all the functions prototypes for the HAL
* module driver.
******************************************************************************
@@ -154,8 +154,9 @@
*/
#endif /* SYSCFG_CFGR1_PA11_PA12_RMP */
-#if defined(STM32F091xC)
+#if defined(STM32F091xC) || defined(STM32F098xx)
/** @defgroup HAL_IRDA_ENV_SEL HAL IRDA Enveloppe Selection
+ * @note Applicable on STM32F09x
* @{
*/
#define HAL_SYSCFG_IRDA_ENV_SEL_TIM16 (SYSCFG_CFGR1_IRDA_ENV_SEL_0 & SYSCFG_CFGR1_IRDA_ENV_SEL_1) /* 00: Timer16 is selected as IRDA Modulation enveloppe source */
@@ -168,7 +169,7 @@
/**
* @}
*/
-#endif /* STM32F091xC */
+#endif /* STM32F091xC || STM32F098xx */
/** @defgroup HAL_FastModePlus_I2C HAL FastModePlus I2C
@@ -211,22 +212,22 @@
#endif /* SYSCFG_CFGR1_I2C_FMP_I2C2 */
#if defined(SYSCFG_CFGR1_I2C_FMP_PA9)
-#define HAL_SYSCFG_FASTMODEPLUS_I2C2_PA9 (SYSCFG_CFGR1_I2C_FMP_PA9) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 (SYSCFG_CFGR1_I2C_FMP_PA9) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
0: PA9 pin operates in standard mode
1: FM+ mode is enabled on PA9 pin, and the Speed control is bypassed */
#endif /* SYSCFG_CFGR1_I2C_FMP_PA9 */
#if defined(SYSCFG_CFGR1_I2C_FMP_PA10)
-#define HAL_SYSCFG_FASTMODEPLUS_I2C2_PA10 (SYSCFG_CFGR1_I2C_FMP_PA10) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 (SYSCFG_CFGR1_I2C_FMP_PA10) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
0: PA10 pin operates in standard mode
1: FM+ mode is enabled on PA10 pin, and the Speed control is bypassed */
#endif /* SYSCFG_CFGR1_I2C_FMP_PA10 */
-#if defined(STM32F091xC)|| defined(STM32F098xx)
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F042x6) || defined(STM32F048xx)
#define IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG(CONFIG) (((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C1) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C2) || \
- ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C2_PA9) || \
- ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C2_PA10) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PA9) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PA10) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) || \
@@ -238,20 +239,14 @@
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB9))
-#elif defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx)
+#elif defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || defined(STM32F070x6) || defined(STM32F070xB) || defined(STM32F030x6)
#define IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG(CONFIG) (((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C1) || \
- ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C2_PA9) || \
- ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C2_PA10) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PA9) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PA10) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB9))
-#elif defined(STM32F042x6) || defined(STM32F048xx)
-#define IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG(CONFIG) (((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C1) || \
- ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) || \
- ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
- ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) || \
- ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB9))
#else
#define IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG(CONFIG) (((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
@@ -265,113 +260,115 @@
#if defined(STM32F091xC) || defined (STM32F098xx)
/** @defgroup HAL_ISR_Wrapper HAL ISR Wrapper
+ * @brief ISR Wrapper
+ * @note applicable on STM32F09x
* @{
*/
-#define HAL_SYSCFG_ITLINE0 ((uint32_t) 0x00000000)
-#define HAL_SYSCFG_ITLINE1 ((uint32_t) 0x00000001)
-#define HAL_SYSCFG_ITLINE2 ((uint32_t) 0x00000002)
-#define HAL_SYSCFG_ITLINE3 ((uint32_t) 0x00000003)
-#define HAL_SYSCFG_ITLINE4 ((uint32_t) 0x00000004)
-#define HAL_SYSCFG_ITLINE5 ((uint32_t) 0x00000005)
-#define HAL_SYSCFG_ITLINE6 ((uint32_t) 0x00000006)
-#define HAL_SYSCFG_ITLINE7 ((uint32_t) 0x00000007)
-#define HAL_SYSCFG_ITLINE8 ((uint32_t) 0x00000008)
-#define HAL_SYSCFG_ITLINE9 ((uint32_t) 0x00000009)
-#define HAL_SYSCFG_ITLINE10 ((uint32_t) 0x0000000A)
-#define HAL_SYSCFG_ITLINE11 ((uint32_t) 0x0000000B)
-#define HAL_SYSCFG_ITLINE12 ((uint32_t) 0x0000000C)
-#define HAL_SYSCFG_ITLINE13 ((uint32_t) 0x0000000D)
-#define HAL_SYSCFG_ITLINE14 ((uint32_t) 0x0000000E)
-#define HAL_SYSCFG_ITLINE15 ((uint32_t) 0x0000000F)
-#define HAL_SYSCFG_ITLINE16 ((uint32_t) 0x00000010)
-#define HAL_SYSCFG_ITLINE17 ((uint32_t) 0x00000011)
-#define HAL_SYSCFG_ITLINE18 ((uint32_t) 0x00000012)
-#define HAL_SYSCFG_ITLINE19 ((uint32_t) 0x00000013)
-#define HAL_SYSCFG_ITLINE20 ((uint32_t) 0x00000014)
-#define HAL_SYSCFG_ITLINE21 ((uint32_t) 0x00000015)
-#define HAL_SYSCFG_ITLINE22 ((uint32_t) 0x00000016)
-#define HAL_SYSCFG_ITLINE23 ((uint32_t) 0x00000017)
-#define HAL_SYSCFG_ITLINE24 ((uint32_t) 0x00000018)
-#define HAL_SYSCFG_ITLINE25 ((uint32_t) 0x00000019)
-#define HAL_SYSCFG_ITLINE26 ((uint32_t) 0x0000001A)
-#define HAL_SYSCFG_ITLINE27 ((uint32_t) 0x0000001B)
-#define HAL_SYSCFG_ITLINE28 ((uint32_t) 0x0000001C)
-#define HAL_SYSCFG_ITLINE29 ((uint32_t) 0x0000001D)
-#define HAL_SYSCFG_ITLINE30 ((uint32_t) 0x0000001E)
-#define HAL_SYSCFG_ITLINE31 ((uint32_t) 0x0000001F)
+#define HAL_SYSCFG_ITLINE0 ((uint32_t) 0x00000000) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE1 ((uint32_t) 0x00000001) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE2 ((uint32_t) 0x00000002) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE3 ((uint32_t) 0x00000003) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE4 ((uint32_t) 0x00000004) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE5 ((uint32_t) 0x00000005) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE6 ((uint32_t) 0x00000006) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE7 ((uint32_t) 0x00000007) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE8 ((uint32_t) 0x00000008) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE9 ((uint32_t) 0x00000009) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE10 ((uint32_t) 0x0000000A) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE11 ((uint32_t) 0x0000000B) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE12 ((uint32_t) 0x0000000C) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE13 ((uint32_t) 0x0000000D) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE14 ((uint32_t) 0x0000000E) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE15 ((uint32_t) 0x0000000F) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE16 ((uint32_t) 0x00000010) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE17 ((uint32_t) 0x00000011) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE18 ((uint32_t) 0x00000012) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE19 ((uint32_t) 0x00000013) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE20 ((uint32_t) 0x00000014) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE21 ((uint32_t) 0x00000015) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE22 ((uint32_t) 0x00000016) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE23 ((uint32_t) 0x00000017) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE24 ((uint32_t) 0x00000018) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE25 ((uint32_t) 0x00000019) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE26 ((uint32_t) 0x0000001A) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE27 ((uint32_t) 0x0000001B) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE28 ((uint32_t) 0x0000001C) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE29 ((uint32_t) 0x0000001D) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE30 ((uint32_t) 0x0000001E) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE31 ((uint32_t) 0x0000001F) /*!< Internal define for macro handling */
-#define HAL_ITLINE_EWDG ((uint32_t) ((HAL_SYSCFG_ITLINE0 << 0x18) | SYSCFG_ITLINE0_SR_EWDG)) /* EWDG has expired .... */
+#define HAL_ITLINE_EWDG ((uint32_t) ((HAL_SYSCFG_ITLINE0 << 0x18) | SYSCFG_ITLINE0_SR_EWDG)) /*!< EWDG has expired .... */
#if defined(STM32F091xC)
-#define HAL_ITLINE_PVDOUT ((uint32_t) ((HAL_SYSCFG_ITLINE1 << 0x18) | SYSCFG_ITLINE1_SR_PVDOUT)) /* Power voltage detection Interrupt .... */
+#define HAL_ITLINE_PVDOUT ((uint32_t) ((HAL_SYSCFG_ITLINE1 << 0x18) | SYSCFG_ITLINE1_SR_PVDOUT)) /*!< Power voltage detection Interrupt .... */
#endif
-#define HAL_ITLINE_VDDIO2 ((uint32_t) ((HAL_SYSCFG_ITLINE1 << 0x18) | SYSCFG_ITLINE1_SR_VDDIO2)) /* VDDIO2 Interrupt .... */
-#define HAL_ITLINE_RTC_WAKEUP ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18) | SYSCFG_ITLINE2_SR_RTC_WAKEUP)) /* RTC WAKEUP -> exti[20] Interrupt */
-#define HAL_ITLINE_RTC_TSTAMP ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18) | SYSCFG_ITLINE2_SR_RTC_TSTAMP)) /* RTC Time Stamp -> exti[19] interrupt */
-#define HAL_ITLINE_RTC_ALRA ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18) | SYSCFG_ITLINE2_SR_RTC_ALRA)) /* RTC Alarm -> exti[17] interrupt .... */
-#define HAL_ITLINE_FLASH_ITF ((uint32_t) ((HAL_SYSCFG_ITLINE3 << 0x18) | SYSCFG_ITLINE3_SR_FLASH_ITF)) /* Flash ITF Interrupt */
-#define HAL_ITLINE_CRS ((uint32_t) ((HAL_SYSCFG_ITLINE4 << 0x18) | SYSCFG_ITLINE4_SR_CRS)) /* CRS Interrupt */
-#define HAL_ITLINE_CLK_CTRL ((uint32_t) ((HAL_SYSCFG_ITLINE4 << 0x18) | SYSCFG_ITLINE4_SR_CLK_CTRL)) /* CLK Control Interrupt */
-#define HAL_ITLINE_EXTI0 ((uint32_t) ((HAL_SYSCFG_ITLINE5 << 0x18) | SYSCFG_ITLINE5_SR_EXTI0)) /* External Interrupt 0 */
-#define HAL_ITLINE_EXTI1 ((uint32_t) ((HAL_SYSCFG_ITLINE5 << 0x18) | SYSCFG_ITLINE5_SR_EXTI1)) /* External Interrupt 1 */
-#define HAL_ITLINE_EXTI2 ((uint32_t) ((HAL_SYSCFG_ITLINE6 << 0x18) | SYSCFG_ITLINE6_SR_EXTI2)) /* External Interrupt 2 */
-#define HAL_ITLINE_EXTI3 ((uint32_t) ((HAL_SYSCFG_ITLINE6 << 0x18) | SYSCFG_ITLINE6_SR_EXTI3)) /* External Interrupt 3 */
-#define HAL_ITLINE_EXTI4 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI4)) /* EXTI4 Interrupt */
-#define HAL_ITLINE_EXTI5 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI5)) /* EXTI5 Interrupt */
-#define HAL_ITLINE_EXTI6 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI6)) /* EXTI6 Interrupt */
-#define HAL_ITLINE_EXTI7 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI7)) /* EXTI7 Interrupt */
-#define HAL_ITLINE_EXTI8 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI8)) /* EXTI8 Interrupt */
-#define HAL_ITLINE_EXTI9 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI9)) /* EXTI9 Interrupt */
-#define HAL_ITLINE_EXTI10 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI10)) /* EXTI10 Interrupt */
-#define HAL_ITLINE_EXTI11 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI11)) /* EXTI11 Interrupt */
-#define HAL_ITLINE_EXTI12 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI12)) /* EXTI12 Interrupt */
-#define HAL_ITLINE_EXTI13 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI13)) /* EXTI13 Interrupt */
-#define HAL_ITLINE_EXTI14 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI14)) /* EXTI14 Interrupt */
-#define HAL_ITLINE_EXTI15 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI15)) /* EXTI15 Interrupt */
-#define HAL_ITLINE_TSC_EOA ((uint32_t) ((HAL_SYSCFG_ITLINE8 << 0x18) | SYSCFG_ITLINE8_SR_TSC_EOA)) /* Touch control EOA Interrupt */
-#define HAL_ITLINE_TSC_MCE ((uint32_t) ((HAL_SYSCFG_ITLINE8 << 0x18) | SYSCFG_ITLINE8_SR_TSC_MCE)) /* Touch control MCE Interrupt */
-#define HAL_ITLINE_DMA1_CH1 ((uint32_t) ((HAL_SYSCFG_ITLINE9 << 0x18) | SYSCFG_ITLINE9_SR_DMA1_CH1)) /* DMA1 Channel 1 Interrupt */
-#define HAL_ITLINE_DMA1_CH2 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA1_CH2)) /* DMA1 Channel 2 Interrupt */
-#define HAL_ITLINE_DMA1_CH3 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA1_CH3)) /* DMA1 Channel 3 Interrupt */
-#define HAL_ITLINE_DMA2_CH1 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA2_CH1)) /* DMA2 Channel 1 Interrupt */
-#define HAL_ITLINE_DMA2_CH2 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA2_CH2)) /* DMA2 Channel 2 Interrupt */
-#define HAL_ITLINE_DMA1_CH4 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH4)) /* DMA1 Channel 4 Interrupt */
-#define HAL_ITLINE_DMA1_CH5 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH5)) /* DMA1 Channel 5 Interrupt */
-#define HAL_ITLINE_DMA1_CH6 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH6)) /* DMA1 Channel 6 Interrupt */
-#define HAL_ITLINE_DMA1_CH7 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH7)) /* DMA1 Channel 7 Interrupt */
-#define HAL_ITLINE_DMA2_CH3 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA2_CH3)) /* DMA2 Channel 3 Interrupt */
-#define HAL_ITLINE_DMA2_CH4 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA2_CH4)) /* DMA2 Channel 4 Interrupt */
-#define HAL_ITLINE_DMA2_CH5 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA2_CH5)) /* DMA2 Channel 5 Interrupt */
-#define HAL_ITLINE_ADC ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18) | SYSCFG_ITLINE12_SR_ADC)) /* ADC Interrupt */
-#define HAL_ITLINE_COMP1 ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18) | SYSCFG_ITLINE12_SR_COMP1)) /* COMP1 Interrupt -> exti[21] */
-#define HAL_ITLINE_COMP2 ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18) | SYSCFG_ITLINE12_SR_COMP2)) /* COMP2 Interrupt -> exti[21] */
-#define HAL_ITLINE_TIM1_BRK ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_BRK)) /* TIM1 BRK Interrupt */
-#define HAL_ITLINE_TIM1_UPD ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_UPD)) /* TIM1 UPD Interrupt */
-#define HAL_ITLINE_TIM1_TRG ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_TRG)) /* TIM1 TRG Interrupt */
-#define HAL_ITLINE_TIM1_CCU ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_CCU)) /* TIM1 CCU Interrupt */
-#define HAL_ITLINE_TIM1_CC ((uint32_t) ((HAL_SYSCFG_ITLINE14 << 0x18) | SYSCFG_ITLINE14_SR_TIM1_CC)) /* TIM1 CC Interrupt */
-#define HAL_ITLINE_TIM2 ((uint32_t) ((HAL_SYSCFG_ITLINE15 << 0x18) | SYSCFG_ITLINE15_SR_TIM2_GLB)) /* TIM2 Interrupt */
-#define HAL_ITLINE_TIM3 ((uint32_t) ((HAL_SYSCFG_ITLINE16 << 0x18) | SYSCFG_ITLINE16_SR_TIM3_GLB)) /* TIM3 Interrupt */
-#define HAL_ITLINE_DAC ((uint32_t) ((HAL_SYSCFG_ITLINE17 << 0x18) | SYSCFG_ITLINE17_SR_DAC)) /* DAC Interrupt */
-#define HAL_ITLINE_TIM6 ((uint32_t) ((HAL_SYSCFG_ITLINE17 << 0x18) | SYSCFG_ITLINE17_SR_TIM6_GLB)) /* TIM6 Interrupt */
-#define HAL_ITLINE_TIM7 ((uint32_t) ((HAL_SYSCFG_ITLINE18 << 0x18) | SYSCFG_ITLINE18_SR_TIM7_GLB)) /* TIM7 Interrupt */
-#define HAL_ITLINE_TIM14 ((uint32_t) ((HAL_SYSCFG_ITLINE19 << 0x18) | SYSCFG_ITLINE19_SR_TIM14_GLB)) /* TIM14 Interrupt */
-#define HAL_ITLINE_TIM15 ((uint32_t) ((HAL_SYSCFG_ITLINE20 << 0x18) | SYSCFG_ITLINE20_SR_TIM15_GLB)) /* TIM15 Interrupt */
-#define HAL_ITLINE_TIM16 ((uint32_t) ((HAL_SYSCFG_ITLINE21 << 0x18) | SYSCFG_ITLINE21_SR_TIM16_GLB)) /* TIM16 Interrupt */
-#define HAL_ITLINE_TIM17 ((uint32_t) ((HAL_SYSCFG_ITLINE22 << 0x18) | SYSCFG_ITLINE22_SR_TIM17_GLB)) /* TIM17 Interrupt */
-#define HAL_ITLINE_I2C1 ((uint32_t) ((HAL_SYSCFG_ITLINE23 << 0x18) | SYSCFG_ITLINE23_SR_I2C1_GLB)) /* I2C1 Interrupt -> exti[23] */
-#define HAL_ITLINE_I2C2 ((uint32_t) ((HAL_SYSCFG_ITLINE24 << 0x18) | SYSCFG_ITLINE24_SR_I2C2_GLB)) /* I2C2 Interrupt */
-#define HAL_ITLINE_SPI1 ((uint32_t) ((HAL_SYSCFG_ITLINE25 << 0x18) | SYSCFG_ITLINE25_SR_SPI1)) /* I2C1 Interrupt -> exti[23] */
-#define HAL_ITLINE_SPI2 ((uint32_t) ((HAL_SYSCFG_ITLINE26 << 0x18) | SYSCFG_ITLINE26_SR_SPI2)) /* SPI1 Interrupt */
+#define HAL_ITLINE_VDDIO2 ((uint32_t) ((HAL_SYSCFG_ITLINE1 << 0x18) | SYSCFG_ITLINE1_SR_VDDIO2)) /*!< VDDIO2 Interrupt .... */
+#define HAL_ITLINE_RTC_WAKEUP ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18) | SYSCFG_ITLINE2_SR_RTC_WAKEUP)) /*!< RTC WAKEUP -> exti[20] Interrupt */
+#define HAL_ITLINE_RTC_TSTAMP ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18) | SYSCFG_ITLINE2_SR_RTC_TSTAMP)) /*!< RTC Time Stamp -> exti[19] interrupt */
+#define HAL_ITLINE_RTC_ALRA ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18) | SYSCFG_ITLINE2_SR_RTC_ALRA)) /*!< RTC Alarm -> exti[17] interrupt .... */
+#define HAL_ITLINE_FLASH_ITF ((uint32_t) ((HAL_SYSCFG_ITLINE3 << 0x18) | SYSCFG_ITLINE3_SR_FLASH_ITF)) /*!< Flash ITF Interrupt */
+#define HAL_ITLINE_CRS ((uint32_t) ((HAL_SYSCFG_ITLINE4 << 0x18) | SYSCFG_ITLINE4_SR_CRS)) /*!< CRS Interrupt */
+#define HAL_ITLINE_CLK_CTRL ((uint32_t) ((HAL_SYSCFG_ITLINE4 << 0x18) | SYSCFG_ITLINE4_SR_CLK_CTRL)) /*!< CLK Control Interrupt */
+#define HAL_ITLINE_EXTI0 ((uint32_t) ((HAL_SYSCFG_ITLINE5 << 0x18) | SYSCFG_ITLINE5_SR_EXTI0)) /*!< External Interrupt 0 */
+#define HAL_ITLINE_EXTI1 ((uint32_t) ((HAL_SYSCFG_ITLINE5 << 0x18) | SYSCFG_ITLINE5_SR_EXTI1)) /*!< External Interrupt 1 */
+#define HAL_ITLINE_EXTI2 ((uint32_t) ((HAL_SYSCFG_ITLINE6 << 0x18) | SYSCFG_ITLINE6_SR_EXTI2)) /*!< External Interrupt 2 */
+#define HAL_ITLINE_EXTI3 ((uint32_t) ((HAL_SYSCFG_ITLINE6 << 0x18) | SYSCFG_ITLINE6_SR_EXTI3)) /*!< External Interrupt 3 */
+#define HAL_ITLINE_EXTI4 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI4)) /*!< EXTI4 Interrupt */
+#define HAL_ITLINE_EXTI5 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI5)) /*!< EXTI5 Interrupt */
+#define HAL_ITLINE_EXTI6 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI6)) /*!< EXTI6 Interrupt */
+#define HAL_ITLINE_EXTI7 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI7)) /*!< EXTI7 Interrupt */
+#define HAL_ITLINE_EXTI8 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI8)) /*!< EXTI8 Interrupt */
+#define HAL_ITLINE_EXTI9 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI9)) /*!< EXTI9 Interrupt */
+#define HAL_ITLINE_EXTI10 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI10)) /*!< EXTI10 Interrupt */
+#define HAL_ITLINE_EXTI11 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI11)) /*!< EXTI11 Interrupt */
+#define HAL_ITLINE_EXTI12 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI12)) /*!< EXTI12 Interrupt */
+#define HAL_ITLINE_EXTI13 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI13)) /*!< EXTI13 Interrupt */
+#define HAL_ITLINE_EXTI14 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI14)) /*!< EXTI14 Interrupt */
+#define HAL_ITLINE_EXTI15 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI15)) /*!< EXTI15 Interrupt */
+#define HAL_ITLINE_TSC_EOA ((uint32_t) ((HAL_SYSCFG_ITLINE8 << 0x18) | SYSCFG_ITLINE8_SR_TSC_EOA)) /*!< Touch control EOA Interrupt */
+#define HAL_ITLINE_TSC_MCE ((uint32_t) ((HAL_SYSCFG_ITLINE8 << 0x18) | SYSCFG_ITLINE8_SR_TSC_MCE)) /*!< Touch control MCE Interrupt */
+#define HAL_ITLINE_DMA1_CH1 ((uint32_t) ((HAL_SYSCFG_ITLINE9 << 0x18) | SYSCFG_ITLINE9_SR_DMA1_CH1)) /*!< DMA1 Channel 1 Interrupt */
+#define HAL_ITLINE_DMA1_CH2 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA1_CH2)) /*!< DMA1 Channel 2 Interrupt */
+#define HAL_ITLINE_DMA1_CH3 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA1_CH3)) /*!< DMA1 Channel 3 Interrupt */
+#define HAL_ITLINE_DMA2_CH1 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA2_CH1)) /*!< DMA2 Channel 1 Interrupt */
+#define HAL_ITLINE_DMA2_CH2 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA2_CH2)) /*!< DMA2 Channel 2 Interrupt */
+#define HAL_ITLINE_DMA1_CH4 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH4)) /*!< DMA1 Channel 4 Interrupt */
+#define HAL_ITLINE_DMA1_CH5 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH5)) /*!< DMA1 Channel 5 Interrupt */
+#define HAL_ITLINE_DMA1_CH6 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH6)) /*!< DMA1 Channel 6 Interrupt */
+#define HAL_ITLINE_DMA1_CH7 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH7)) /*!< DMA1 Channel 7 Interrupt */
+#define HAL_ITLINE_DMA2_CH3 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA2_CH3)) /*!< DMA2 Channel 3 Interrupt */
+#define HAL_ITLINE_DMA2_CH4 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA2_CH4)) /*!< DMA2 Channel 4 Interrupt */
+#define HAL_ITLINE_DMA2_CH5 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA2_CH5)) /*!< DMA2 Channel 5 Interrupt */
+#define HAL_ITLINE_ADC ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18) | SYSCFG_ITLINE12_SR_ADC)) /*!< ADC Interrupt */
+#define HAL_ITLINE_COMP1 ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18) | SYSCFG_ITLINE12_SR_COMP1)) /*!< COMP1 Interrupt -> exti[21] */
+#define HAL_ITLINE_COMP2 ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18) | SYSCFG_ITLINE12_SR_COMP2)) /*!< COMP2 Interrupt -> exti[21] */
+#define HAL_ITLINE_TIM1_BRK ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_BRK)) /*!< TIM1 BRK Interrupt */
+#define HAL_ITLINE_TIM1_UPD ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_UPD)) /*!< TIM1 UPD Interrupt */
+#define HAL_ITLINE_TIM1_TRG ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_TRG)) /*!< TIM1 TRG Interrupt */
+#define HAL_ITLINE_TIM1_CCU ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_CCU)) /*!< TIM1 CCU Interrupt */
+#define HAL_ITLINE_TIM1_CC ((uint32_t) ((HAL_SYSCFG_ITLINE14 << 0x18) | SYSCFG_ITLINE14_SR_TIM1_CC)) /*!< TIM1 CC Interrupt */
+#define HAL_ITLINE_TIM2 ((uint32_t) ((HAL_SYSCFG_ITLINE15 << 0x18) | SYSCFG_ITLINE15_SR_TIM2_GLB)) /*!< TIM2 Interrupt */
+#define HAL_ITLINE_TIM3 ((uint32_t) ((HAL_SYSCFG_ITLINE16 << 0x18) | SYSCFG_ITLINE16_SR_TIM3_GLB)) /*!< TIM3 Interrupt */
+#define HAL_ITLINE_DAC ((uint32_t) ((HAL_SYSCFG_ITLINE17 << 0x18) | SYSCFG_ITLINE17_SR_DAC)) /*!< DAC Interrupt */
+#define HAL_ITLINE_TIM6 ((uint32_t) ((HAL_SYSCFG_ITLINE17 << 0x18) | SYSCFG_ITLINE17_SR_TIM6_GLB)) /*!< TIM6 Interrupt */
+#define HAL_ITLINE_TIM7 ((uint32_t) ((HAL_SYSCFG_ITLINE18 << 0x18) | SYSCFG_ITLINE18_SR_TIM7_GLB)) /*!< TIM7 Interrupt */
+#define HAL_ITLINE_TIM14 ((uint32_t) ((HAL_SYSCFG_ITLINE19 << 0x18) | SYSCFG_ITLINE19_SR_TIM14_GLB)) /*!< TIM14 Interrupt */
+#define HAL_ITLINE_TIM15 ((uint32_t) ((HAL_SYSCFG_ITLINE20 << 0x18) | SYSCFG_ITLINE20_SR_TIM15_GLB)) /*!< TIM15 Interrupt */
+#define HAL_ITLINE_TIM16 ((uint32_t) ((HAL_SYSCFG_ITLINE21 << 0x18) | SYSCFG_ITLINE21_SR_TIM16_GLB)) /*!< TIM16 Interrupt */
+#define HAL_ITLINE_TIM17 ((uint32_t) ((HAL_SYSCFG_ITLINE22 << 0x18) | SYSCFG_ITLINE22_SR_TIM17_GLB)) /*!< TIM17 Interrupt */
+#define HAL_ITLINE_I2C1 ((uint32_t) ((HAL_SYSCFG_ITLINE23 << 0x18) | SYSCFG_ITLINE23_SR_I2C1_GLB)) /*!< I2C1 Interrupt -> exti[23] */
+#define HAL_ITLINE_I2C2 ((uint32_t) ((HAL_SYSCFG_ITLINE24 << 0x18) | SYSCFG_ITLINE24_SR_I2C2_GLB)) /*!< I2C2 Interrupt */
+#define HAL_ITLINE_SPI1 ((uint32_t) ((HAL_SYSCFG_ITLINE25 << 0x18) | SYSCFG_ITLINE25_SR_SPI1)) /*!< I2C1 Interrupt -> exti[23] */
+#define HAL_ITLINE_SPI2 ((uint32_t) ((HAL_SYSCFG_ITLINE26 << 0x18) | SYSCFG_ITLINE26_SR_SPI2)) /*!< SPI1 Interrupt */
#define HAL_ITLINE_USART1 ((uint32_t) ((HAL_SYSCFG_ITLINE27 << 0x18) | SYSCFG_ITLINE27_SR_USART1_GLB)) /*!< USART1 GLB Interrupt -> exti[25] */
#define HAL_ITLINE_USART2 ((uint32_t) ((HAL_SYSCFG_ITLINE28 << 0x18) | SYSCFG_ITLINE28_SR_USART2_GLB)) /*!< USART2 GLB Interrupt -> exti[26] */
-#define HAL_ITLINE_USART3 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART3_GLB)) /* USART3 Interrupt .... */
-#define HAL_ITLINE_USART4 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART4_GLB)) /* USART4 Interrupt .... */
-#define HAL_ITLINE_USART5 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART5_GLB)) /* USART5 Interrupt .... */
-#define HAL_ITLINE_USART6 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART6_GLB)) /* USART6 Interrupt .... */
-#define HAL_ITLINE_USART7 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART7_GLB)) /* USART7 Interrupt .... */
-#define HAL_ITLINE_USART8 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART8_GLB)) /* USART8 Interrupt .... */
-#define HAL_ITLINE_CAN ((uint32_t) ((HAL_SYSCFG_ITLINE30 << 0x18) | SYSCFG_ITLINE30_SR_CAN)) /* CAN Interrupt */
-#define HAL_ITLINE_CEC ((uint32_t) ((HAL_SYSCFG_ITLINE30 << 0x18) | SYSCFG_ITLINE30_SR_CEC)) /* CEC Interrupt -> exti[27] */
+#define HAL_ITLINE_USART3 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART3_GLB)) /*!< USART3 Interrupt .... */
+#define HAL_ITLINE_USART4 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART4_GLB)) /*!< USART4 Interrupt .... */
+#define HAL_ITLINE_USART5 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART5_GLB)) /*!< USART5 Interrupt .... */
+#define HAL_ITLINE_USART6 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART6_GLB)) /*!< USART6 Interrupt .... */
+#define HAL_ITLINE_USART7 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART7_GLB)) /*!< USART7 Interrupt .... */
+#define HAL_ITLINE_USART8 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART8_GLB)) /*!< USART8 Interrupt .... */
+#define HAL_ITLINE_CAN ((uint32_t) ((HAL_SYSCFG_ITLINE30 << 0x18) | SYSCFG_ITLINE30_SR_CAN)) /*!< CAN Interrupt */
+#define HAL_ITLINE_CEC ((uint32_t) ((HAL_SYSCFG_ITLINE30 << 0x18) | SYSCFG_ITLINE30_SR_CEC)) /*!< CEC Interrupt -> exti[27] */
/**
* @}
*/
@@ -608,7 +605,8 @@
#if defined(STM32F091xC) || defined (STM32F098xx)
/** @defgroup HAL_ISR_wrapper_check HAL ISR wrapper check
* @brief ISR wrapper check
- * @note Allow to determine interrupt source per line.
+ * @note This feature is applicable on STM32F09x
+ * @note Allow to determine interrupt source per line.
* @{
*/
#define __HAL_GET_PENDING_IT(__SOURCE__) (SYSCFG->IT_LINE_SR[((__SOURCE__) >> 0x18)] & ((__SOURCE__) & 0x00FFFFFF))
@@ -620,6 +618,7 @@
#if defined(STM32F091xC) || defined (STM32F098xx)
/** @defgroup HAL_SYSCFG_IRDA_modulation_envelope_selection HAL SYSCFG IRDA modulation envelope selection
* @brief selection of the modulation envelope signal macro, using bits [7:6] of SYS_CTRL(CFGR1) register
+ * @note This feature is applicable on STM32F09x
* @param __SOURCE__: This parameter can be a value of @ref HAL_IRDA_ENV_SEL
* @{
*/
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_adc.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_adc.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_adc.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file containing functions prototypes of ADC HAL library.
******************************************************************************
* @attention
@@ -66,7 +66,7 @@
* - For all parameters: ADC disabled (this is the only possible ADC state to modify parameter 'ClockPrescaler')
* - For all parameters except 'ClockPrescaler': ADC enabled without conversion on going on regular group.
* If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed
- * without error reporting without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly).
+ * without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly).
*/
typedef struct
{
@@ -726,7 +726,7 @@
/**
* @brief Enable ADC discontinuous conversion mode for regular group
- * @param _REG_DISCONTINUOUS_MODE_: Regulat discontinuous mode.
+ * @param _REG_DISCONTINUOUS_MODE_: Regular discontinuous mode.
* @retval None
*/
#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS(_REG_DISCONTINUOUS_MODE_) ((_REG_DISCONTINUOUS_MODE_) << 16)
@@ -781,14 +781,7 @@
* @retval None
*/
#define __HAL_ADC_CFGR1_DMACONTREQ(_DMACONTREQ_MODE_) ((_DMACONTREQ_MODE_) << 1)
-
-/**
- * @brief Configure the channel number into offset OFRx register
- * @param _CHANNEL_: ADC Channel
- * @retval None
- */
-#define __HAL_ADC_OFR_CHANNEL(_CHANNEL_) ((_CHANNEL_) << 26)
-
+
/**
* @brief Configure the analog watchdog high threshold into register TR.
* @param _Threshold_: Threshold value
@@ -810,7 +803,7 @@
*/
#define __HAL_ADC_ENABLING_CONDITIONS(__HANDLE__) \
(( ( ((__HANDLE__)->Instance->CR) & \
- (ADC_CR_ADCAL | ADC_CR_ADSTP | \
+ (ADC_CR_ADCAL | ADC_CR_ADSTP | \
ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN ) \
) == RESET \
) ? SET : RESET)
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_adc_ex.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_adc_ex.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_adc_ex.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of ADC HAL Extension module. ****************************************************************************** * @attention
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_can.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_can.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_can.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of CAN HAL module.
******************************************************************************
* @attention
@@ -43,7 +43,7 @@
extern "C" {
#endif
-#if defined(STM32F072xB) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F072xB) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
@@ -77,23 +77,6 @@
}HAL_CAN_StateTypeDef;
/**
- * @brief HAL CAN Error Code structure definition
- */
-typedef enum
-{
- HAL_CAN_ERROR_NONE = 0x00, /*!< No error */
- HAL_CAN_ERROR_EWG = 0x01, /*!< EWG error */
- HAL_CAN_ERROR_EPV = 0x02, /*!< EPV error */
- HAL_CAN_ERROR_BOF = 0x04, /*!< BOF error */
- HAL_CAN_ERROR_STF = 0x08, /*!< Stuff error */
- HAL_CAN_ERROR_FOR = 0x10, /*!< Form error */
- HAL_CAN_ERROR_ACK = 0x20, /*!< Acknowledgment error */
- HAL_CAN_ERROR_BR = 0x40, /*!< Bit recessive */
- HAL_CAN_ERROR_BD = 0x80, /*!< LEC dominant */
- HAL_CAN_ERROR_CRC = 0x100 /*!< LEC transfer error */
-}HAL_CAN_ErrorTypeDef;
-
-/**
* @brief CAN init structure definition
*/
typedef struct
@@ -250,7 +233,8 @@
__IO HAL_CAN_StateTypeDef State; /*!< CAN communication state */
- __IO HAL_CAN_ErrorTypeDef ErrorCode; /*!< CAN Error code */
+ __IO uint32_t ErrorCode; /*!< CAN Error code
+ This parameter can be a value of @ref CAN_Error */
}CAN_HandleTypeDef;
/**
@@ -263,6 +247,23 @@
* @{
*/
+/** @defgroup CAN_Error CAN Error
+ * @{
+ */
+#define HAL_CAN_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_CAN_ERROR_EWG ((uint32_t)0x00000001) /*!< EWG error */
+#define HAL_CAN_ERROR_EPV ((uint32_t)0x00000002) /*!< EPV error */
+#define HAL_CAN_ERROR_BOF ((uint32_t)0x00000004) /*!< BOF error */
+#define HAL_CAN_ERROR_STF ((uint32_t)0x00000008) /*!< Stuff error */
+#define HAL_CAN_ERROR_FOR ((uint32_t)0x00000010) /*!< Form error */
+#define HAL_CAN_ERROR_ACK ((uint32_t)0x00000020) /*!< Acknowledgment error */
+#define HAL_CAN_ERROR_BR ((uint32_t)0x00000040) /*!< Bit recessive */
+#define HAL_CAN_ERROR_BD ((uint32_t)0x00000080) /*!< LEC dominant */
+#define HAL_CAN_ERROR_CRC ((uint32_t)0x00000100) /*!< LEC transfer error */
+/**
+ * @}
+ */
+
/** @defgroup CAN_InitStatus CAN InitStatus
* @{
*/
@@ -796,7 +797,7 @@
* @}
*/
-#endif /* STM32F072xB || STM32F042x6 || STM32F048xx || STM32F091xC || STM32F098xx */
+#endif /* STM32F072xB || STM32F042x6 || STM32F048xx || STM32F078xx || STM32F091xC || STM32F098xx */
#ifdef __cplusplus
}
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_cec.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_cec.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_cec.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of CEC HAL module. ****************************************************************************** * @attention @@ -178,8 +178,8 @@ uint16_t RxXferSize; /* CEC Rx Transfer size, 0: header received only */ - uint32_t ErrorCode; /* For errors handling purposes, copy of ISR register - in case error is reported */ + __IO uint32_t ErrorCode; /* For errors handling purposes, copy of ISR register + in case error is reported */ HAL_LockTypeDef Lock; /* Locking object */
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_comp.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_comp.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_comp.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of COMP HAL module.
******************************************************************************
* @attention
@@ -97,18 +97,6 @@
}COMP_InitTypeDef;
/**
- * @brief HAL State structures definition
- */
-typedef enum
-{
- HAL_COMP_STATE_RESET = 0x00, /*!< COMP not yet initialized or disabled */
- HAL_COMP_STATE_READY = 0x01, /*!< COMP initialized and ready for use */
- HAL_COMP_STATE_READY_LOCKED = 0x11, /*!< COMP initialized but the configuration is locked */
- HAL_COMP_STATE_BUSY = 0x02, /*!< COMP is running */
- HAL_COMP_STATE_BUSY_LOCKED = 0x12 /*!< COMP is running and the configuration is locked */
-}HAL_COMP_StateTypeDef;
-
-/**
* @brief COMP Handle Structure definition
*/
typedef struct
@@ -116,7 +104,8 @@
COMP_TypeDef *Instance; /*!< Register base address */
COMP_InitTypeDef Init; /*!< COMP required parameters */
HAL_LockTypeDef Lock; /*!< Locking object */
- __IO HAL_COMP_StateTypeDef State; /*!< COMP communication state */
+ __IO uint32_t State; /*!< COMP communication state
+ This parameter can be a value of @ref COMP_State */
}COMP_HandleTypeDef;
/**
@@ -128,6 +117,18 @@
* @{
*/
+/** @defgroup COMP_State COMP State
+ * @{
+ */
+#define HAL_COMP_STATE_RESET ((uint32_t)0x00000000) /*!< COMP not yet initialized or disabled */
+#define HAL_COMP_STATE_READY ((uint32_t)0x00000001) /*!< COMP initialized and ready for use */
+#define HAL_COMP_STATE_READY_LOCKED ((uint32_t)0x00000011) /*!< COMP initialized but the configuration is locked */
+#define HAL_COMP_STATE_BUSY ((uint32_t)0x00000002) /*!< COMP is running */
+#define HAL_COMP_STATE_BUSY_LOCKED ((uint32_t)0x00000012) /*!< COMP is running and the configuration is locked */
+/**
+ * @}
+ */
+
/** @defgroup COMP_OutputPolarity COMP OutputPolarity
* @{
*/
@@ -447,7 +448,7 @@
* @{
*/
/* Peripheral State and Error functions ***************************************/
-HAL_COMP_StateTypeDef HAL_COMP_GetState(COMP_HandleTypeDef *hcomp);
+uint32_t HAL_COMP_GetState(COMP_HandleTypeDef *hcomp);
/**
* @}
*/
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_conf.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_conf.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_conf_template.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief HAL configuration file. ****************************************************************************** * @attention
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_cortex.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_cortex.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_cortex.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of CORTEX HAL module. ****************************************************************************** * @attention
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_crc.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_crc.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_crc.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of CRC HAL module.
******************************************************************************
* @attention
@@ -92,7 +92,7 @@
e.g., for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65.
No need to specify it if DefaultPolynomialUse is set to DEFAULT_POLYNOMIAL_ENABLE */
- uint32_t CRCLength; /*!< This parameter is a value of @ref CRCEx_Polynomial_Size_Definitions and indicates CRC length.
+ uint32_t CRCLength; /*!< This parameter is a value of @ref CRCEx_Polynomial_Sizes and indicates CRC length.
Value can be either one of
CRC_POLYLENGTH_32B (32-bit CRC)
CRC_POLYLENGTH_16B (16-bit CRC)
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_crc_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_crc_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_crc_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of CRC HAL extension module.
******************************************************************************
* @attention
@@ -87,10 +87,10 @@
* @}
*/
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
/** @defgroup CRCEx_Polynomial_Sizes Polynomial sizes to configure the IP
* @{
*/
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
#define CRC_POLYLENGTH_32B ((uint32_t)0x00000000)
#define CRC_POLYLENGTH_16B ((uint32_t)CRC_CR_POLYSIZE_0)
#define CRC_POLYLENGTH_8B ((uint32_t)CRC_CR_POLYSIZE_1)
@@ -99,6 +99,10 @@
((LENGTH) == CRC_POLYLENGTH_16B) || \
((LENGTH) == CRC_POLYLENGTH_8B) || \
((LENGTH) == CRC_POLYLENGTH_7B))
+#else
+#define CRC_POLYLENGTH_32B ((uint32_t)0x00000000)
+#define IS_CRC_POL_LENGTH(LENGTH) ((LENGTH) == CRC_POLYLENGTH_32B)
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
/**
* @}
*/
@@ -106,14 +110,18 @@
/** @defgroup CRCEx_Polynomial_Size_Definitions CRC polynomial possible sizes actual definitions
* @{
*/
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
#define HAL_CRC_LENGTH_32B 32
#define HAL_CRC_LENGTH_16B 16
#define HAL_CRC_LENGTH_8B 8
#define HAL_CRC_LENGTH_7B 7
+#else
+#define HAL_CRC_LENGTH_32B 32
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
/**
* @}
*/
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+
/**
* @}
*/
@@ -137,7 +145,7 @@
*/
#define __HAL_CRC_OUTPUTREVERSAL_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(CRC_CR_REV_OUT))
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/**
* @brief Set CRC non-default polynomial
* @param __HANDLE__ : CRC handle
@@ -145,7 +153,7 @@
* @retval None.
*/
#define __HAL_CRC_POLYNOMIAL_CONFIG(__HANDLE__, __POLYNOMIAL__) ((__HANDLE__)->Instance->POL = (__POLYNOMIAL__))
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/**
* @}
*/
@@ -165,9 +173,9 @@
HAL_StatusTypeDef HAL_CRCEx_Input_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t InputReverseMode);
HAL_StatusTypeDef HAL_CRCEx_Output_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t OutputReverseMode);
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
HAL_StatusTypeDef HAL_CRCEx_Polynomial_Set(CRC_HandleTypeDef *hcrc, uint32_t Pol, uint32_t PolyLength);
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/**
* @}
*/
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_dac.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_dac.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_dac.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of DAC HAL module. ****************************************************************************** * @attention
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_dac_ex.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_dac_ex.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_dac_ex.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of DAC HAL Extension module. ****************************************************************************** * @attention
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_def.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_def.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_def.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief This file contains HAL common defines, enumeration, macros and
* structures definitions.
******************************************************************************
@@ -70,8 +70,8 @@
} HAL_LockTypeDef;
/* Exported macro ------------------------------------------------------------*/
-#ifndef HAL_NULL
- #define HAL_NULL (void *) 0
+#ifndef NULL
+ #define NULL 0
#endif
#define HAL_MAX_DELAY 0xFFFFFFFF
@@ -85,6 +85,8 @@
(__DMA_HANDLE_).Parent = (__HANDLE__); \
} while(0)
+#define UNUSED(x) ((void)(x))
+
/** @brief Reset the Handle's State field.
* @param __HANDLE__: specifies the Peripheral Handle.
* @note This macro can be used for the following purpose:
@@ -154,6 +156,23 @@
#endif /* __ALIGN_BEGIN */
#endif /* __GNUC__ */
+/**
+ * @brief __NOINLINE definition
+ */
+#if defined ( __CC_ARM ) || defined ( __GNUC__ )
+/* ARM & GNUCompiler
+ ----------------
+*/
+#define __NOINLINE __attribute__ ( (noinline) )
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+ ---------------
+*/
+#define __NOINLINE _Pragma("optimize = no_inline")
+
+#endif
+
#ifdef __cplusplus
}
#endif
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_dma.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_dma.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_dma.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of DMA HAL module.
******************************************************************************
* @attention
@@ -288,34 +288,34 @@
* @{
*/
-#define DMA_FLAG_GL1 ((uint32_t)0x00000001)
-#define DMA_FLAG_TC1 ((uint32_t)0x00000002)
-#define DMA_FLAG_HT1 ((uint32_t)0x00000004)
-#define DMA_FLAG_TE1 ((uint32_t)0x00000008)
-#define DMA_FLAG_GL2 ((uint32_t)0x00000010)
-#define DMA_FLAG_TC2 ((uint32_t)0x00000020)
-#define DMA_FLAG_HT2 ((uint32_t)0x00000040)
-#define DMA_FLAG_TE2 ((uint32_t)0x00000080)
-#define DMA_FLAG_GL3 ((uint32_t)0x00000100)
-#define DMA_FLAG_TC3 ((uint32_t)0x00000200)
-#define DMA_FLAG_HT3 ((uint32_t)0x00000400)
-#define DMA_FLAG_TE3 ((uint32_t)0x00000800)
-#define DMA_FLAG_GL4 ((uint32_t)0x00001000)
-#define DMA_FLAG_TC4 ((uint32_t)0x00002000)
-#define DMA_FLAG_HT4 ((uint32_t)0x00004000)
-#define DMA_FLAG_TE4 ((uint32_t)0x00008000)
-#define DMA_FLAG_GL5 ((uint32_t)0x00010000)
-#define DMA_FLAG_TC5 ((uint32_t)0x00020000)
-#define DMA_FLAG_HT5 ((uint32_t)0x00040000)
-#define DMA_FLAG_TE5 ((uint32_t)0x00080000)
-#define DMA_FLAG_GL6 ((uint32_t)0x00100000)
-#define DMA_FLAG_TC6 ((uint32_t)0x00200000)
-#define DMA_FLAG_HT6 ((uint32_t)0x00400000)
-#define DMA_FLAG_TE6 ((uint32_t)0x00800000)
-#define DMA_FLAG_GL7 ((uint32_t)0x01000000)
-#define DMA_FLAG_TC7 ((uint32_t)0x02000000)
-#define DMA_FLAG_HT7 ((uint32_t)0x04000000)
-#define DMA_FLAG_TE7 ((uint32_t)0x08000000)
+#define DMA_FLAG_GL1 ((uint32_t)0x00000001) /*!< Channel 1 global interrupt flag */
+#define DMA_FLAG_TC1 ((uint32_t)0x00000002) /*!< Channel 1 transfer complete flag */
+#define DMA_FLAG_HT1 ((uint32_t)0x00000004) /*!< Channel 1 half transfer flag */
+#define DMA_FLAG_TE1 ((uint32_t)0x00000008) /*!< Channel 1 transfer error flag */
+#define DMA_FLAG_GL2 ((uint32_t)0x00000010) /*!< Channel 2 global interrupt flag */
+#define DMA_FLAG_TC2 ((uint32_t)0x00000020) /*!< Channel 2 transfer complete flag */
+#define DMA_FLAG_HT2 ((uint32_t)0x00000040) /*!< Channel 2 half transfer flag */
+#define DMA_FLAG_TE2 ((uint32_t)0x00000080) /*!< Channel 2 transfer error flag */
+#define DMA_FLAG_GL3 ((uint32_t)0x00000100) /*!< Channel 3 global interrupt flag */
+#define DMA_FLAG_TC3 ((uint32_t)0x00000200) /*!< Channel 3 transfer complete flag */
+#define DMA_FLAG_HT3 ((uint32_t)0x00000400) /*!< Channel 3 half transfer flag */
+#define DMA_FLAG_TE3 ((uint32_t)0x00000800) /*!< Channel 3 transfer error flag */
+#define DMA_FLAG_GL4 ((uint32_t)0x00001000) /*!< Channel 4 global interrupt flag */
+#define DMA_FLAG_TC4 ((uint32_t)0x00002000) /*!< Channel 4 transfer complete flag */
+#define DMA_FLAG_HT4 ((uint32_t)0x00004000) /*!< Channel 4 half transfer flag */
+#define DMA_FLAG_TE4 ((uint32_t)0x00008000) /*!< Channel 4 transfer error flag */
+#define DMA_FLAG_GL5 ((uint32_t)0x00010000) /*!< Channel 5 global interrupt flag */
+#define DMA_FLAG_TC5 ((uint32_t)0x00020000) /*!< Channel 5 transfer complete flag */
+#define DMA_FLAG_HT5 ((uint32_t)0x00040000) /*!< Channel 5 half transfer flag */
+#define DMA_FLAG_TE5 ((uint32_t)0x00080000) /*!< Channel 5 transfer error flag */
+#define DMA_FLAG_GL6 ((uint32_t)0x00100000) /*!< Channel 6 global interrupt flag */
+#define DMA_FLAG_TC6 ((uint32_t)0x00200000) /*!< Channel 6 transfer complete flag */
+#define DMA_FLAG_HT6 ((uint32_t)0x00400000) /*!< Channel 6 half transfer flag */
+#define DMA_FLAG_TE6 ((uint32_t)0x00800000) /*!< Channel 6 transfer error flag */
+#define DMA_FLAG_GL7 ((uint32_t)0x01000000) /*!< Channel 7 global interrupt flag */
+#define DMA_FLAG_TC7 ((uint32_t)0x02000000) /*!< Channel 7 transfer complete flag */
+#define DMA_FLAG_HT7 ((uint32_t)0x04000000) /*!< Channel 7 half transfer flag */
+#define DMA_FLAG_TE7 ((uint32_t)0x08000000) /*!< Channel 7 transfer error flag */
/**
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_dma_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_dma_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_dma_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of DMA HAL Extension module.
******************************************************************************
* @attention
@@ -56,201 +56,229 @@
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
-#if defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
/** @defgroup DMAEx_Exported_Constants DMAEx Exported Constants
* @{
*/
-#define DMA1_CHANNEL1_RMP 0x00000000
-#define DMA1_CHANNEL2_RMP 0x10000000
-#define DMA1_CHANNEL3_RMP 0x20000000
-#define DMA1_CHANNEL4_RMP 0x30000000
-#define DMA1_CHANNEL5_RMP 0x40000000
-#define DMA1_CHANNEL6_RMP 0x50000000
-#define DMA1_CHANNEL7_RMP 0x60000000
-#define DMA2_CHANNEL1_RMP 0x00000000
-#define DMA2_CHANNEL2_RMP 0x10000000
-#define DMA2_CHANNEL3_RMP 0x20000000
-#define DMA2_CHANNEL4_RMP 0x30000000
-#define DMA2_CHANNEL5_RMP 0x40000000
+#define DMA1_CHANNEL1_RMP 0x00000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL2_RMP 0x10000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL3_RMP 0x20000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL4_RMP 0x30000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL5_RMP 0x40000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#if !defined(STM32F030xC)
+#define DMA1_CHANNEL6_RMP 0x50000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL7_RMP 0x60000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL1_RMP 0x00000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL2_RMP 0x10000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL3_RMP 0x20000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL4_RMP 0x30000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL5_RMP 0x40000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#endif /* !defined(STM32F030xC) */
/****************** DMA1 remap bit field definition********************/
/* DMA1 - Channel 1 */
-#define HAL_DMA1_CH1_DEFAULT (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMA1 */
-#define HAL_DMA1_CH1_ADC (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_ADC) /*!< Remap ADC on DMA1 Channel 1*/
-#define HAL_DMA1_CH1_TIM17_CH1 (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 1 */
-#define HAL_DMA1_CH1_TIM17_UP (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 1 */
-#define HAL_DMA1_CH1_USART1_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 1 */
-#define HAL_DMA1_CH1_USART2_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 1 */
-#define HAL_DMA1_CH1_USART3_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 1 */
-#define HAL_DMA1_CH1_USART4_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 1 */
-#define HAL_DMA1_CH1_USART5_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 1 */
-#define HAL_DMA1_CH1_USART6_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 1 */
-#define HAL_DMA1_CH1_USART7_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 1 */
-#define HAL_DMA1_CH1_USART8_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_DEFAULT (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH1_ADC (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_ADC) /*!< Remap ADC on DMA1 Channel 1*/
+#define HAL_DMA1_CH1_TIM17_CH1 (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 1 */
+#define HAL_DMA1_CH1_TIM17_UP (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART1_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART2_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART3_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART4_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART5_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART6_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 1 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH1_USART7_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART8_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 1 */
+#endif /* !defined(STM32F030xC) */
+
/* DMA1 - Channel 2 */
-#define HAL_DMA1_CH2_DEFAULT (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMA1 */
-#define HAL_DMA1_CH2_ADC (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_ADC) /*!< Remap ADC on DMA1 channel 2 */
-#define HAL_DMA1_CH2_I2C1_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 2 */
-#define HAL_DMA1_CH2_SPI1_RX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_SPI1_RX) /*!< Remap SPI1 Rx on DMA1 channel 2 */
-#define HAL_DMA1_CH2_TIM1_CH1 (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_TIM1_CH1) /*!< Remap TIM1 channel 1 on DMA1 channel 2 */
-#define HAL_DMA1_CH2_TIM17_CH1 (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 2 */
-#define HAL_DMA1_CH2_TIM17_UP (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 2 */
-#define HAL_DMA1_CH2_USART1_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 2 */
-#define HAL_DMA1_CH2_USART2_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 2 */
-#define HAL_DMA1_CH2_USART3_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 2 */
-#define HAL_DMA1_CH2_USART4_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 2 */
-#define HAL_DMA1_CH2_USART5_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 2 */
-#define HAL_DMA1_CH2_USART6_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 2 */
-#define HAL_DMA1_CH2_USART7_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 2 */
-#define HAL_DMA1_CH2_USART8_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_DEFAULT (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH2_ADC (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_ADC) /*!< Remap ADC on DMA1 channel 2 */
+#define HAL_DMA1_CH2_I2C1_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_SPI1_RX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_SPI1_RX) /*!< Remap SPI1 Rx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_TIM1_CH1 (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM1_CH1) /*!< Remap TIM1 channel 1 on DMA1 channel 2 */
+#define HAL_DMA1_CH2_TIM17_CH1 (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 2 */
+#define HAL_DMA1_CH2_TIM17_UP (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART1_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART2_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART3_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART4_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART5_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART6_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 2 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH2_USART7_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART8_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 2 */
+#endif /* !defined(STM32F030xC) */
+
/* DMA1 - Channel 3 */
-#define HAL_DMA1_CH3_DEFAULT (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMA1 */
-#define HAL_DMA1_CH3_TIM6_UP (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA1 channel 3 */
-#define HAL_DMA1_CH3_DAC_CH1 (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_DAC_CH1) /*!< Remap DAC Channel 1on DMA1 channel 3 */
-#define HAL_DMA1_CH3_I2C1_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 3 */
-#define HAL_DMA1_CH3_SPI1_TX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_SPI1_TX) /*!< Remap SPI1 Tx on DMA1 channel 3 */
-#define HAL_DMA1_CH3_TIM1_CH2 (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_TIM1_CH2) /*!< Remap TIM1 channel 2 on DMA1 channel 3 */
-#define HAL_DMA1_CH3_TIM2_CH2 (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_TIM2_CH2) /*!< Remap TIM2 channel 2 on DMA1 channel 3 */
-#define HAL_DMA1_CH3_TIM16_CH1 (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 3 */
-#define HAL_DMA1_CH3_TIM16_UP (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 3 */
-#define HAL_DMA1_CH3_USART1_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 3 */
-#define HAL_DMA1_CH3_USART2_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 3 */
-#define HAL_DMA1_CH3_USART3_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 3 */
-#define HAL_DMA1_CH3_USART4_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 3 */
-#define HAL_DMA1_CH3_USART5_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 3 */
-#define HAL_DMA1_CH3_USART6_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 3 */
-#define HAL_DMA1_CH3_USART7_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 3 */
-#define HAL_DMA1_CH3_USART8_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_DEFAULT (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH3_TIM6_UP (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA1 channel 3 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH3_DAC_CH1 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_DAC_CH1) /*!< Remap DAC Channel 1on DMA1 channel 3 */
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH3_I2C1_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_SPI1_TX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_SPI1_TX) /*!< Remap SPI1 Tx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_TIM1_CH2 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM1_CH2) /*!< Remap TIM1 channel 2 on DMA1 channel 3 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH3_TIM2_CH2 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM2_CH2) /*!< Remap TIM2 channel 2 on DMA1 channel 3 */
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH3_TIM16_CH1 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 3 */
+#define HAL_DMA1_CH3_TIM16_UP (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART1_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART2_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART3_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART4_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART5_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART6_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 3 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH3_USART7_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART8_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 3 */
+#endif /* !defined(STM32F030xC) */
+
/* DMA1 - Channel 4 */
-#define HAL_DMA1_CH4_DEFAULT (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMA1 */
-#define HAL_DMA1_CH4_TIM7_UP (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA1 channel 4 */
-#define HAL_DMA1_CH4_DAC_CH2 (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_DAC_CH2) /*!< Remap DAC Channel 2 on DMA1 channel 4 */
-#define HAL_DMA1_CH4_I2C2_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_I2C2_TX) /*!< Remap I2C2 Tx on DMA1 channel 4 */
-#define HAL_DMA1_CH4_SPI2_RX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 4 */
-#define HAL_DMA1_CH4_TIM2_CH4 (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_TIM2_CH4) /*!< Remap TIM2 channel 4 on DMA1 channel 4 */
-#define HAL_DMA1_CH4_TIM3_CH1 (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_TIM3_CH1) /*!< Remap TIM3 channel 1 on DMA1 channel 4 */
-#define HAL_DMA1_CH4_TIM3_TRIG (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 4 */
-#define HAL_DMA1_CH4_TIM16_CH1 (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 4 */
-#define HAL_DMA1_CH4_TIM16_UP (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 4 */
-#define HAL_DMA1_CH4_USART1_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 4 */
-#define HAL_DMA1_CH4_USART2_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 4 */
-#define HAL_DMA1_CH4_USART3_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 4 */
-#define HAL_DMA1_CH4_USART4_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 4 */
-#define HAL_DMA1_CH4_USART5_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 4 */
-#define HAL_DMA1_CH4_USART6_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 4 */
-#define HAL_DMA1_CH4_USART7_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 4 */
-#define HAL_DMA1_CH4_USART8_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_DEFAULT (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH4_TIM7_UP (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA1 channel 4 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH4_DAC_CH2 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_DAC_CH2) /*!< Remap DAC Channel 2 on DMA1 channel 4 */
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH4_I2C2_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_I2C2_TX) /*!< Remap I2C2 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_SPI2_RX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 4 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH4_TIM2_CH4 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM2_CH4) /*!< Remap TIM2 channel 4 on DMA1 channel 4 */
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH4_TIM3_CH1 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM3_CH1) /*!< Remap TIM3 channel 1 on DMA1 channel 4 */
+#define HAL_DMA1_CH4_TIM3_TRIG (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 4 */
+#define HAL_DMA1_CH4_TIM16_CH1 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 4 */
+#define HAL_DMA1_CH4_TIM16_UP (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART1_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART2_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART3_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART4_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART5_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART6_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 4 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH4_USART7_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART8_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 4 */
+#endif /* !defined(STM32F030xC) */
+
/* DMA1 - Channel 5 */
-#define HAL_DMA1_CH5_DEFAULT (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMA1 */
-#define HAL_DMA1_CH5_I2C2_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_I2C2_RX) /*!< Remap I2C2 Rx on DMA1 channel 5 */
-#define HAL_DMA1_CH5_SPI2_TX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_SPI2_TX) /*!< Remap SPI1 Tx on DMA1 channel 5 */
-#define HAL_DMA1_CH5_TIM1_CH3 (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_TIM1_CH3) /*!< Remap TIM1 channel 3 on DMA1 channel 5 */
-#define HAL_DMA1_CH5_USART1_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 5 */
-#define HAL_DMA1_CH5_USART2_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 5 */
-#define HAL_DMA1_CH5_USART3_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 5 */
-#define HAL_DMA1_CH5_USART4_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 5 */
-#define HAL_DMA1_CH5_USART5_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 5 */
-#define HAL_DMA1_CH5_USART6_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 5 */
-#define HAL_DMA1_CH5_USART7_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 5 */
-#define HAL_DMA1_CH5_USART8_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_DEFAULT (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH5_I2C2_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_I2C2_RX) /*!< Remap I2C2 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_SPI2_TX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_SPI2_TX) /*!< Remap SPI1 Tx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_TIM1_CH3 (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_TIM1_CH3) /*!< Remap TIM1 channel 3 on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART1_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART2_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART3_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART4_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART5_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART6_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 5 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH5_USART7_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART8_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 5 */
+#endif /* !defined(STM32F030xC) */
+
+#if !defined(STM32F030xC)
/* DMA1 - Channel 6 */
-#define HAL_DMA1_CH6_DEFAULT (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMA1 */
-#define HAL_DMA1_CH6_I2C1_TX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 6 */
-#define HAL_DMA1_CH6_SPI2_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 6 */
-#define HAL_DMA1_CH6_TIM1_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM1_CH1) /*!< Remap TIM1 channel 1 on DMA1 channel 6 */
-#define HAL_DMA1_CH6_TIM1_CH2 (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM1_CH2) /*!< Remap TIM1 channel 2 on DMA1 channel 6 */
-#define HAL_DMA1_CH6_TIM1_CH3 (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM1_CH3) /*!< Remap TIM1 channel 3 on DMA1 channel 6 */
-#define HAL_DMA1_CH6_TIM3_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM3_CH1) /*!< Remap TIM3 channel 1 on DMA1 channel 6 */
-#define HAL_DMA1_CH6_TIM3_TRIG (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 6 */
-#define HAL_DMA1_CH6_TIM16_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 6 */
-#define HAL_DMA1_CH6_TIM16_UP (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 6 */
-#define HAL_DMA1_CH6_USART1_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 6 */
-#define HAL_DMA1_CH6_USART2_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 6 */
-#define HAL_DMA1_CH6_USART3_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 6 */
-#define HAL_DMA1_CH6_USART4_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 6 */
-#define HAL_DMA1_CH6_USART5_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 6 */
-#define HAL_DMA1_CH6_USART6_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 6 */
-#define HAL_DMA1_CH6_USART7_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 6 */
-#define HAL_DMA1_CH6_USART8_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_DEFAULT (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH6_I2C1_TX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_SPI2_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM1_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH1) /*!< Remap TIM1 channel 1 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM1_CH2 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH2) /*!< Remap TIM1 channel 2 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM1_CH3 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH3) /*!< Remap TIM1 channel 3 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM3_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM3_CH1) /*!< Remap TIM3 channel 1 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM3_TRIG (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM16_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM16_UP (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART1_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART2_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART3_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART4_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART5_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART6_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART7_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART8_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 6 */
/* DMA1 - Channel 7 */
-#define HAL_DMA1_CH7_DEFAULT (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMA1 */
-#define HAL_DMA1_CH7_I2C1_RX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 7 */
-#define HAL_DMA1_CH7_SPI2_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_SPI2_TX) /*!< Remap SPI2 Tx on DMA1 channel 7 */
-#define HAL_DMA1_CH7_TIM2_CH2 (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_TIM2_CH2) /*!< Remap TIM2 channel 2 on DMA1 channel 7 */
-#define HAL_DMA1_CH7_TIM2_CH4 (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_TIM2_CH4) /*!< Remap TIM2 channel 4 on DMA1 channel 7 */
-#define HAL_DMA1_CH7_TIM17_CH1 (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 7 */
-#define HAL_DMA1_CH7_TIM17_UP (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 7 */
-#define HAL_DMA1_CH7_USART1_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 7 */
-#define HAL_DMA1_CH7_USART2_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 7 */
-#define HAL_DMA1_CH7_USART3_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 7 */
-#define HAL_DMA1_CH7_USART4_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 7 */
-#define HAL_DMA1_CH7_USART5_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 7 */
-#define HAL_DMA1_CH7_USART6_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 7 */
-#define HAL_DMA1_CH7_USART7_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 7 */
-#define HAL_DMA1_CH7_USART8_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_DEFAULT (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH7_I2C1_RX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_SPI2_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_SPI2_TX) /*!< Remap SPI2 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_TIM2_CH2 (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM2_CH2) /*!< Remap TIM2 channel 2 on DMA1 channel 7 */
+#define HAL_DMA1_CH7_TIM2_CH4 (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM2_CH4) /*!< Remap TIM2 channel 4 on DMA1 channel 7 */
+#define HAL_DMA1_CH7_TIM17_CH1 (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 7 */
+#define HAL_DMA1_CH7_TIM17_UP (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART1_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART2_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART3_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART4_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART5_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART6_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART7_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART8_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 7 */
/****************** DMA2 remap bit field definition********************/
/* DMA2 - Channel 1 */
-#define HAL_DMA2_CH1_DEFAULT (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_DEFAULT) /*!< Default remap position for DMA2 */
-#define HAL_DMA2_CH1_I2C2_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_CH1_I2C2_TX) /*!< Remap I2C2 TX on DMA2 channel 1 */
-#define HAL_DMA2_CH1_USART1_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 1 */
-#define HAL_DMA2_CH1_USART2_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 1 */
-#define HAL_DMA2_CH1_USART3_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 1 */
-#define HAL_DMA2_CH1_USART4_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 1 */
-#define HAL_DMA2_CH1_USART5_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 1 */
-#define HAL_DMA2_CH1_USART6_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 1 */
-#define HAL_DMA2_CH1_USART7_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 1 */
-#define HAL_DMA2_CH1_USART8_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_DEFAULT (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH1_I2C2_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_I2C2_TX) /*!< Remap I2C2 TX on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART1_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART2_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART3_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART4_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART5_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART6_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART7_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART8_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 1 */
/* DMA2 - Channel 2 */
-#define HAL_DMA2_CH2_DEFAULT (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_DEFAULT) /*!< Default remap position for DMA2 */
-#define HAL_DMA2_CH2_I2C2_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_CH2_I2C2_RX) /*!< Remap I2C2 Rx on DMA2 channel 2 */
-#define HAL_DMA2_CH2_USART1_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 2 */
-#define HAL_DMA2_CH2_USART2_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 2 */
-#define HAL_DMA2_CH2_USART3_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 2 */
-#define HAL_DMA2_CH2_USART4_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 2 */
-#define HAL_DMA2_CH2_USART5_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 2 */
-#define HAL_DMA2_CH2_USART6_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 2 */
-#define HAL_DMA2_CH2_USART7_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 2 */
-#define HAL_DMA2_CH2_USART8_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_DEFAULT (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH2_I2C2_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_I2C2_RX) /*!< Remap I2C2 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART1_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART2_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART3_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART4_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART5_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART6_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART7_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART8_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 2 */
/* DMA2 - Channel 3 */
-#define HAL_DMA2_CH3_DEFAULT (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_DEFAULT) /*!< Default remap position for DMA2 */
-#define HAL_DMA2_CH3_TIM6_UP (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA2 channel 3 */
-#define HAL_DMA2_CH3_DAC_CH1 (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_DAC_CH1) /*!< Remap DAC channel 1 on DMA2 channel 3 */
-#define HAL_DMA2_CH3_SPI1_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_SPI1_RX) /*!< Remap SPI1 Rx on DMA2 channel 3 */
-#define HAL_DMA2_CH3_USART1_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 3 */
-#define HAL_DMA2_CH3_USART2_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 3 */
-#define HAL_DMA2_CH3_USART3_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 3 */
-#define HAL_DMA2_CH3_USART4_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 3 */
-#define HAL_DMA2_CH3_USART5_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 3 */
-#define HAL_DMA2_CH3_USART6_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 3 */
-#define HAL_DMA2_CH3_USART7_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 3 */
-#define HAL_DMA2_CH3_USART8_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_DEFAULT (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH3_TIM6_UP (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA2 channel 3 */
+#define HAL_DMA2_CH3_DAC_CH1 (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_DAC_CH1) /*!< Remap DAC channel 1 on DMA2 channel 3 */
+#define HAL_DMA2_CH3_SPI1_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_SPI1_RX) /*!< Remap SPI1 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART1_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART2_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART3_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART4_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART5_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART6_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART7_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART8_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 3 */
/* DMA2 - Channel 4 */
-#define HAL_DMA2_CH4_DEFAULT (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_DEFAULT) /*!< Default remap position for DMA2 */
-#define HAL_DMA2_CH4_TIM7_UP (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA2 channel 4 */
-#define HAL_DMA2_CH4_DAC_CH2 (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_DAC_CH2) /*!< Remap DAC channel 2 on DMA2 channel 4 */
-#define HAL_DMA2_CH4_SPI1_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_SPI1_TX) /*!< Remap SPI1 Tx on DMA2 channel 4 */
-#define HAL_DMA2_CH4_USART1_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 4 */
-#define HAL_DMA2_CH4_USART2_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 4 */
-#define HAL_DMA2_CH4_USART3_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 4 */
-#define HAL_DMA2_CH4_USART4_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 4 */
-#define HAL_DMA2_CH4_USART5_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 4 */
-#define HAL_DMA2_CH4_USART6_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 4 */
-#define HAL_DMA2_CH4_USART7_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 4 */
-#define HAL_DMA2_CH4_USART8_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_DEFAULT (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH4_TIM7_UP (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA2 channel 4 */
+#define HAL_DMA2_CH4_DAC_CH2 (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_DAC_CH2) /*!< Remap DAC channel 2 on DMA2 channel 4 */
+#define HAL_DMA2_CH4_SPI1_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_SPI1_TX) /*!< Remap SPI1 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART1_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART2_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART3_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART4_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART5_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART6_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART7_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART8_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 4 */
/* DMA2 - Channel 5 */
-#define HAL_DMA2_CH5_DEFAULT (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_DEFAULT) /*!< Default remap position for DMA2 */
-#define HAL_DMA2_CH5_ADC (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_CH5_ADC) /*!< Remap ADC on DMA2 channel 5 */
-#define HAL_DMA2_CH5_USART1_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 5 */
-#define HAL_DMA2_CH5_USART2_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 5 */
-#define HAL_DMA2_CH5_USART3_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 5 */
-#define HAL_DMA2_CH5_USART4_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 5 */
-#define HAL_DMA2_CH5_USART5_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 5 */
-#define HAL_DMA2_CH5_USART6_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 5 */
-#define HAL_DMA2_CH5_USART7_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 5 */
-#define HAL_DMA2_CH5_USART8_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_DEFAULT (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH5_ADC (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_ADC) /*!< Remap ADC on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART1_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART2_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART3_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART4_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART5_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART6_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART7_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART8_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 5 */
+#endif /* !defined(STM32F030xC) */
-#define IS_HAL_DMA1_REMAP(REQUEST) (((REQUEST) == HAL_DMA1_CH1_DEFAULT) ||\
+#if defined(STM32F091xC) || defined(STM32F098xx)
+#define IS_HAL_DMA1_REMAP(REQUEST) (((REQUEST) == HAL_DMA1_CH1_DEFAULT) ||\
((REQUEST) == HAL_DMA1_CH1_ADC) ||\
((REQUEST) == HAL_DMA1_CH1_TIM17_CH1) ||\
((REQUEST) == HAL_DMA1_CH1_TIM17_UP) ||\
@@ -413,10 +441,76 @@
((REQUEST) == HAL_DMA2_CH5_USART6_TX) ||\
((REQUEST) == HAL_DMA2_CH5_USART7_TX) ||\
((REQUEST) == HAL_DMA2_CH5_USART8_TX ))
+#endif /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F030xC)
+#define IS_HAL_DMA1_REMAP(REQUEST) (((REQUEST) == HAL_DMA1_CH1_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH1_ADC) ||\
+ ((REQUEST) == HAL_DMA1_CH1_TIM17_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH1_TIM17_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH2_ADC) ||\
+ ((REQUEST) == HAL_DMA1_CH2_I2C1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_SPI1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_TIM1_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH2_I2C1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_TIM17_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH2_TIM17_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM6_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH3_I2C1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_SPI1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM1_CH2) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM16_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM16_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM7_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH4_I2C2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_SPI2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM3_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM3_TRIG) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM16_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM16_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH5_I2C2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_SPI2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_TIM1_CH3) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART6_RX))
+#endif /* STM32F030xC */
+
/**
* @}
*/
-#endif /* STM32F091xC || STM32F098xx */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
/* Exported macros -----------------------------------------------------------*/
@@ -473,9 +567,9 @@
* @param __HANDLE__: DMA handle
* @param __FLAG__: Get the specified flag.
* This parameter can be any combination of the following values:
- * @arg DMA_FLAG_TCIFx: Transfer complete flag
- * @arg DMA_FLAG_HTIFx: Half transfer complete flag
- * @arg DMA_FLAG_TEIFx: Transfer error flag
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
* Where x can be 1_7 to select the DMA Channel flag.
* @retval The state of FLAG (SET or RESET).
*/
@@ -487,9 +581,9 @@
* @param __HANDLE__: DMA handle
* @param __FLAG__: specifies the flag to clear.
* This parameter can be any combination of the following values:
- * @arg DMA_FLAG_TCIFx: Transfer complete flag
- * @arg DMA_FLAG_HTIFx: Half transfer complete flag
- * @arg DMA_FLAG_TEIFx: Transfer error flag
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
* Where x can be 1_7 to select the DMA Channel flag.
* @retval None
*/
@@ -558,9 +652,9 @@
* @param __HANDLE__: DMA handle
* @param __FLAG__: Get the specified flag.
* This parameter can be any combination of the following values:
- * @arg DMA_FLAG_TCIFx: Transfer complete flag
- * @arg DMA_FLAG_HTIFx: Half transfer complete flag
- * @arg DMA_FLAG_TEIFx: Transfer error flag
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
* Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag.
* @retval The state of FLAG (SET or RESET).
*/
@@ -574,9 +668,9 @@
* @param __HANDLE__: DMA handle
* @param __FLAG__: specifies the flag to clear.
* This parameter can be any combination of the following values:
- * @arg DMA_FLAG_TCIFx: Transfer complete flag
- * @arg DMA_FLAG_HTIFx: Half transfer complete flag
- * @arg DMA_FLAG_TEIFx: Transfer error flag
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
* Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag.
* @retval None
*/
@@ -584,7 +678,7 @@
(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->IFCR = (__FLAG__)) :\
(DMA1->IFCR = (__FLAG__)))
-#else /* STM32F030x8_STM32F031x6_STM32F038xx_STM32F051x8_STM32F058xx Product devices */
+#else /* STM32F030x8_STM32F030xC_STM32F031x6_STM32F038xx_STM32F051x8_STM32F058xx_STM32F070x6_STM32F070xB Product devices */
/**
* @brief Returns the current DMA Channel transfer complete flag.
* @param __HANDLE__: DMA handle
@@ -626,9 +720,9 @@
* @param __HANDLE__: DMA handle
* @param __FLAG__: Get the specified flag.
* This parameter can be any combination of the following values:
- * @arg DMA_FLAG_TCIFx: Transfer complete flag
- * @arg DMA_FLAG_HTIFx: Half transfer complete flag
- * @arg DMA_FLAG_TEIFx: Transfer error flag
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
* Where x can be 1_5 to select the DMA Channel flag.
* @retval The state of FLAG (SET or RESET).
*/
@@ -640,9 +734,9 @@
* @param __HANDLE__: DMA handle
* @param __FLAG__: specifies the flag to clear.
* This parameter can be any combination of the following values:
- * @arg DMA_FLAG_TCIFx: Transfer complete flag
- * @arg DMA_FLAG_HTIFx: Half transfer complete flag
- * @arg DMA_FLAG_TEIFx: Transfer error flag
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
* Where x can be 1_5 to select the DMA Channel flag.
* @retval None
*/
@@ -651,20 +745,22 @@
#endif
-#if defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __HAL_DMA1_REMAP(__REQUEST__) \
do { assert_param(IS_HAL_DMA1_REMAP(__REQUEST__)); \
- DMA1->RMPCR &= ~((uint32_t)0x0F << (uint32_t)(((__REQUEST__) >> 28) * 4)); \
- DMA1->RMPCR |= (uint32_t)((__REQUEST__) & 0x0FFFFFFF); \
+ DMA1->CSELR &= ~((uint32_t)0x0F << (uint32_t)(((__REQUEST__) >> 28) * 4)); \
+ DMA1->CSELR |= (uint32_t)((__REQUEST__) & 0x0FFFFFFF); \
}while(0)
+#if defined(STM32F091xC) || defined(STM32F098xx)
#define __HAL_DMA2_REMAP(__REQUEST__) \
do { assert_param(IS_HAL_DMA2_REMAP(__REQUEST__)); \
- DMA2->RMPCR &= ~((uint32_t)0x0F << (uint32_t)(((__REQUEST__) >> 28) * 4)); \
- DMA2->RMPCR |= (uint32_t)((__REQUEST__) & 0x0FFFFFFF); \
+ DMA2->CSELR &= ~((uint32_t)0x0F << (uint32_t)(((__REQUEST__) >> 28) * 4)); \
+ DMA2->CSELR |= (uint32_t)((__REQUEST__) & 0x0FFFFFFF); \
}while(0)
+#endif /* STM32F091xC || STM32F098xx */
- #endif /* STM32F091xC || STM32F098xx */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
/**
* @}
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_flash.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_flash.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_flash.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of Flash HAL module.
******************************************************************************
* @attention
@@ -60,15 +60,6 @@
* @{
*/
-/**
- * @brief FLASH Error source
- */
-typedef enum
-{
- FLASH_ERROR_PG = 0x01,
- FLASH_ERROR_WRP = 0x02
-} FLASH_ErrorTypeDef;
-
/**
* @brief FLASH Erase structure definition
*/
@@ -134,17 +125,18 @@
*/
typedef struct
{
- __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /* Internal variable to indicate which procedure is ongoing or not in IT context */
+ __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*!< Internal variable to indicate which procedure is ongoing or not in IT context */
- __IO uint32_t DataRemaining; /* Internal variable to save the remaining pages to erase or half-word to program in IT context */
+ __IO uint32_t DataRemaining; /*!< Internal variable to save the remaining pages to erase or half-word to program in IT context */
- __IO uint32_t Address; /* Internal variable to save address selected for program or erase */
+ __IO uint32_t Address; /*!< Internal variable to save address selected for program or erase */
- __IO uint64_t Data; /* Internal variable to save data to be programmed */
+ __IO uint64_t Data; /*!< Internal variable to save data to be programmed */
- HAL_LockTypeDef Lock; /* FLASH locking object */
+ HAL_LockTypeDef Lock; /*!< FLASH locking object */
- __IO FLASH_ErrorTypeDef ErrorCode; /* FLASH error code */
+ __IO uint32_t ErrorCode; /*!< FLASH error code
+ This parameter can be a value of @ref FLASH_Error */
} FLASH_ProcessTypeDef;
@@ -158,6 +150,16 @@
* @{
*/
+/** @defgroup FLASH_Error FLASH Error
+ * @{
+ */
+#define FLASH_ERROR_NONE ((uint32_t)0x00000000)
+#define FLASH_ERROR_PG ((uint32_t)0x00000001)
+#define FLASH_ERROR_WRP ((uint32_t)0x00000002)
+/**
+ * @}
+ */
+
/** @defgroup FLASH_Type_Erase FLASH Type Erase
* @{
*/
@@ -204,7 +206,7 @@
#define OPTIONBYTE_USER ((uint32_t)0x04) /*!<USER option byte configuration*/
#define OPTIONBYTE_DATA ((uint32_t)0x08) /*!<DATA option byte configuration*/
-#define IS_OPTIONBYTE(VALUE) (((VALUE) < (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA)))
+#define IS_OPTIONBYTE(VALUE) ((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA))
/**
* @}
*/
@@ -485,7 +487,7 @@
* @{
*/
/* Peripheral State and Error functions ***************************************/
-FLASH_ErrorTypeDef HAL_FLASH_GetError(void);
+uint32_t HAL_FLASH_GetError(void);
/**
* @}
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_flash_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_flash_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_flash_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of FLASH HAL Extension module.
******************************************************************************
* @attention
@@ -62,21 +62,21 @@
/** @defgroup FLASHEx_Address FLASHEx Address
* @{
*/
-#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F038xx)
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F038xx) || defined(STM32F070x6)
#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x08007FFF))
-#endif /* STM32F030x6 || STM32F031x6 || STM32F042x6 || STM32F048xx || STM32F038xx */
+#endif /* STM32F030x6 || STM32F031x6 || STM32F042x6 || STM32F048xx || STM32F038xx || STM32F070x6 */
#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x0800FFFF))
#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x0801FFFF))
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB*/
-#if defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x0803FFFF))
-#endif /* STM32F091xC || STM32F098xx */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC*/
/**
* @}
*/
@@ -85,14 +85,14 @@
* @{
*/
#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || \
- defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx)
+ defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx) || defined(STM32F070x6)
#define FLASH_PAGE_SIZE 0x400
-#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F058xx */
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F058xx || STM32F070x6 */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define FLASH_PAGE_SIZE 0x800
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx || STM32F030xC */
/**
* @}
@@ -101,21 +101,21 @@
/** @defgroup FLASHEx_Nb_Pages FLASHEx Nb Pages
* @{
*/
-#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F038xx)
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F038xx)|| defined(STM32F070x6)
#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08007FFF)
-#endif /* STM32F030x6 || STM32F031x6 || STM32F042x6 || STM32F048xx || STM32F038xx */
+#endif /* STM32F030x6 || STM32F031x6 || STM32F042x6 || STM32F048xx || STM32F038xx || STM32F070x6 */
#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0800FFFF)
#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0801FFFF)
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB */
-#if defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0803FFFF)
-#endif /* STM32F091xC || STM32F098xx */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
/**
* @}
*/
@@ -124,7 +124,7 @@
* @{
*/
#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || \
- defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx)
+ defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx) || defined(STM32F070x6)
#define OB_WRP_PAGES0TO3 ((uint32_t)0x00000001) /* Write protection of page 0 to 3 */
#define OB_WRP_PAGES4TO7 ((uint32_t)0x00000002) /* Write protection of page 4 to 7 */
#define OB_WRP_PAGES8TO11 ((uint32_t)0x00000004) /* Write protection of page 8 to 11 */
@@ -149,17 +149,17 @@
#define OB_WRP_PAGES32TO63MASK ((uint32_t)0x0000FF00)
#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
-#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F038xx)
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F038xx)|| defined(STM32F070x6)
#define OB_WRP_ALLPAGES ((uint32_t)0x000000FF) /*!< Write protection of all pages */
-#endif /* STM32F030x6 || STM32F031x6 || STM32F042x6 || STM32F048xx || STM32F038xx */
+#endif /* STM32F030x6 || STM32F031x6 || STM32F042x6 || STM32F048xx || STM32F038xx || STM32F070x6 */
#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
#define OB_WRP_ALLPAGES ((uint32_t)0x0000FFFF) /*!< Write protection of all pages */
#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
-#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F038xx || STM32F058xx */
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F038xx || STM32F058xx || STM32F070x6 */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define OB_WRP_PAGES0TO1 ((uint32_t)0x00000001) /* Write protection of page 0 to 1 */
#define OB_WRP_PAGES2TO3 ((uint32_t)0x00000002) /* Write protection of page 2 to 3 */
#define OB_WRP_PAGES4TO5 ((uint32_t)0x00000004) /* Write protection of page 4 to 5 */
@@ -191,32 +191,32 @@
#define OB_WRP_PAGES56TO57 ((uint32_t)0x10000000) /* Write protection of page 56 to 57 */
#define OB_WRP_PAGES58TO59 ((uint32_t)0x20000000) /* Write protection of page 58 to 59 */
#define OB_WRP_PAGES60TO61 ((uint32_t)0x40000000) /* Write protection of page 60 to 61 */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
#define OB_WRP_PAGES62TO63 ((uint32_t)0x80000000) /* Write protection of page 62 to 63 */
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx */
-#if defined(STM32F091xC) || defined(STM32F098xx)
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB */
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define OB_WRP_PAGES62TO127 ((uint32_t)0x80000000) /* Write protection of page 62 to 127 */
-#endif /* STM32F091xC || STM32F098xx */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
#define OB_WRP_PAGES0TO15MASK ((uint32_t)0x000000FF)
#define OB_WRP_PAGES16TO31MASK ((uint32_t)0x0000FF00)
#define OB_WRP_PAGES32TO47MASK ((uint32_t)0x00FF0000)
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
#define OB_WRP_PAGES48TO63MASK ((uint32_t)0xFF000000)
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx */
-#if defined(STM32F091xC) || defined(STM32F098xx)
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB */
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define OB_WRP_PAGES48TO127MASK ((uint32_t)0xFF000000)
-#endif /* STM32F091xC || STM32F098xx */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
#define OB_WRP_ALLPAGES ((uint32_t)0xFFFFFFFF) /*!< Write protection of all pages */
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx || STM32F030xC || STM32F070xB */
#define IS_OB_WRP(PAGE) (((PAGE) != 0x0000000))
/**
* @}
*/
-#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)|| defined(STM32F070x6)
/** @defgroup FLASHEx_OB_BOOT_SEL FLASHEx OB BOOT SEL
* @{
*/
@@ -236,7 +236,7 @@
/**
* @}
*/
-#endif /* STM32F042x6 || STM32F048xx || STM32F091xC || STM32F098xx */
+#endif /* STM32F042x6 || STM32F048xx || STM32F091xC || STM32F098xx || STM32F030xC || STM32F070x6 */
/**
* @}
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_gpio.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_gpio.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_gpio.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of GPIO HAL module. ****************************************************************************** * @attention
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_gpio_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_gpio_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_gpio_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of GPIO HAL Extension module.
******************************************************************************
* @attention
@@ -431,6 +431,71 @@
#endif /* STM32F091xC || STM32F098xx */
+#if defined(STM32F030xC)
+/*--------------------------- STM32F030xC ----------------------------------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< AF0: SPI2 Alternate Function mapping */
+#define GPIO_AF0_TIM3 ((uint8_t)0x00) /*!< AF0: TIM3 Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< AF0: TIM15 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_USART4 ((uint8_t)0x00) /*!< AF0: USART4 Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /*!< AF1: TIM15 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_USART3 ((uint8_t)0x01) /*!< AF1: USART3 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_I2C2 ((uint8_t)0x01) /*!< AF1: I2C2 Alternate Function mapping */
+#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< AF1: SPI2 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+#define GPIO_AF2_USART5 ((uint8_t)0x02) /*!< AF2: USART5 Alternate Function mapping */
+#define GPIO_AF2_USART6 ((uint8_t)0x02) /*!< AF2: USART6 Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /*!< AF3: TIM15 Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03) /*!< AF3: I2C1 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< AF4: USART4 Alternate Function mapping */
+#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< AF4: USART3 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /*!< AF4: I2C1 Alternate Function mapping */
+#define GPIO_AF4_USART5 ((uint8_t)0x04) /*!< AF4: USART5 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< AF5: TIM15 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< AF5: SPI2 Alternate Function mapping */
+#define GPIO_AF5_I2C2 ((uint8_t)0x05) /*!< AF5: I2C2 Alternate Function mapping */
+#define GPIO_AF5_MCO ((uint8_t)0x05) /*!< AF5: MCO Alternate Function mapping */
+#define GPIO_AF5_USART6 ((uint8_t)0x05) /*!< AF5: USART6 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06)
+
+#endif /* STM32F030xC */
+
#if defined (STM32F072xB) || defined (STM32F078xx)
/*--------------------------- STM32F072xB/STM32F078xx ---------------------------*/
/* AF 0 */
@@ -510,6 +575,65 @@
#endif /* STM32F072xB || STM32F078xx */
+#if defined (STM32F070xB)
+/*---------------------------------- STM32F070xB ---------------------------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< AF0: SPI2 Alternate Function mapping */
+#define GPIO_AF0_TIM3 ((uint8_t)0x00) /*!< AF0: TIM3 Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< AF0: TIM15 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_USART4 ((uint8_t)0x00) /*!< AF0: USART4 Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /*!< AF1: TIM15 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_USART3 ((uint8_t)0x01) /*!< AF1: USART4 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_I2C2 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< AF1: SPI2 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+#define GPIO_AF2_USB ((uint8_t)0x02) /*!< AF2: USB Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /*!< AF3: TIM15 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< AF4: USART4 Alternate Function mapping */
+#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< AF4: USART3 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< AF5: TIM15 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< AF5: SPI2 Alternate Function mapping */
+#define GPIO_AF5_I2C2 ((uint8_t)0x05) /*!< AF5: I2C2 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06)
+
+#endif /* STM32F070xB */
+
#if defined (STM32F042x6) || defined (STM32F048xx)
/*--------------------------- STM32F042x6/STM32F048xx ---------------------------*/
/* AF 0 */
@@ -569,6 +693,56 @@
#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06)
#endif /* STM32F042x6 || STM32F048xx */
+
+#if defined (STM32F070x6)
+/*--------------------------------------- STM32F070x6 ----------------------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1 Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_USB ((uint8_t)0x02) /*!< AF2: USB Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03) /*!< AF3: I2C1 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /*!< AF4: I2C1 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_MCO ((uint8_t)0x05) /*!< AF5: MCO Alternate Function mapping */
+#define GPIO_AF5_I2C1 ((uint8_t)0x05) /*!< AF5: I2C1 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_USB ((uint8_t)0x05) /*!< AF5: USB Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06)
+
+#endif /* STM32F070x6 */
/**
* @}
*/
@@ -587,24 +761,24 @@
*/
#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
defined (STM32F091xC) || defined (STM32F098xx)
-#define GET_GPIO_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
((__GPIOx__) == (GPIOB))? 1U :\
((__GPIOx__) == (GPIOC))? 2U :\
((__GPIOx__) == (GPIOD))? 3U :\
((__GPIOx__) == (GPIOE))? 4U : 5U)
#endif
-#if defined (STM32F030x6) || defined (STM32F030x8) || \
+#if defined (STM32F030x6) || defined (STM32F030x8) || defined (STM32F070xB) || defined (STM32F030xC) || \
defined (STM32F051x8) || defined (STM32F058xx)
-#define GET_GPIO_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
((__GPIOx__) == (GPIOB))? 1U :\
((__GPIOx__) == (GPIOC))? 2U :\
((__GPIOx__) == (GPIOD))? 3U : 5U)
#endif
#if defined (STM32F031x6) || defined (STM32F038xx) || \
- defined (STM32F042x6) || defined (STM32F048xx)
-#define GET_GPIO_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
+ defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6)
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
((__GPIOx__) == (GPIOB))? 1U :\
((__GPIOx__) == (GPIOC))? 2U : 5U)
#endif
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_i2c.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_i2c.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_i2c.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of I2C HAL module.
******************************************************************************
* @attention
@@ -121,27 +121,6 @@
* @}
*/
-/** @defgroup I2C_Error_Code_structure_definition I2C Error Code structure definition
- * @brief I2C Error Code structure definition
- * @{
- */
-
-typedef enum
-{
- HAL_I2C_ERROR_NONE = 0x00, /*!< No error */
- HAL_I2C_ERROR_BERR = 0x01, /*!< BERR error */
- HAL_I2C_ERROR_ARLO = 0x02, /*!< ARLO error */
- HAL_I2C_ERROR_AF = 0x04, /*!< AF error */
- HAL_I2C_ERROR_OVR = 0x08, /*!< OVR error */
- HAL_I2C_ERROR_DMA = 0x10, /*!< DMA transfer error */
- HAL_I2C_ERROR_TIMEOUT = 0x20, /*!< Timeout error */
- HAL_I2C_ERROR_SIZE = 0x40 /*!< Size Management error */
-}HAL_I2C_ErrorTypeDef;
-
-/**
- * @}
- */
-
/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition
* @brief I2C handle Structure definition
* @{
@@ -167,7 +146,8 @@
__IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */
- __IO HAL_I2C_ErrorTypeDef ErrorCode; /* I2C Error code */
+ __IO uint32_t ErrorCode; /*!< I2C Error code
+ This parameter can be a value of @ref I2C_Error */
}I2C_HandleTypeDef;
/**
@@ -183,6 +163,25 @@
* @{
*/
+/** @defgroup I2C_Error I2C Error
+ * @brief I2C Error
+ * @{
+ */
+
+#define HAL_I2C_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_I2C_ERROR_BERR ((uint32_t)0x00000001) /*!< BERR error */
+#define HAL_I2C_ERROR_ARLO ((uint32_t)0x00000002) /*!< ARLO error */
+#define HAL_I2C_ERROR_AF ((uint32_t)0x00000004) /*!< AF error */
+#define HAL_I2C_ERROR_OVR ((uint32_t)0x00000008) /*!< OVR error */
+#define HAL_I2C_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+#define HAL_I2C_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */
+#define HAL_I2C_ERROR_SIZE ((uint32_t)0x00000040) /*!< Size Management error */
+
+/**
+ * @}
+ */
+
+
/** @defgroup I2C_addressing_mode I2C addressing mode
* @{
*/
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_i2c_ex.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_i2c_ex.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_i2c_ex.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of I2C HAL Extension module. ****************************************************************************** * @attention @@ -100,8 +100,10 @@ /* Peripheral Control functions ************************************************/ HAL_StatusTypeDef HAL_I2CEx_AnalogFilter_Config(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter); HAL_StatusTypeDef HAL_I2CEx_DigitalFilter_Config(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter); +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp (I2C_HandleTypeDef *hi2c); HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp (I2C_HandleTypeDef *hi2c); +#endif /* !(STM32F030x6) && !(STM32F030x8) && !(STM32F070x6) && !(STM32F070xB) && !(STM32F030xC) */ /** * @}
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_i2s.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_i2s.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_i2s.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of I2S HAL module.
******************************************************************************
* @attention
@@ -104,53 +104,41 @@
}HAL_I2S_StateTypeDef;
/**
- * @brief HAL I2S Error Code structure definition
- */
-typedef enum
-{
- HAL_I2S_ERROR_NONE = 0x00, /*!< No error */
- HAL_I2S_ERROR_TIMEOUT = 0x01, /*!< Timeout error */
- HAL_I2S_ERROR_OVR = 0x02, /*!< OVR error */
- HAL_I2S_ERROR_UDR = 0x04, /*!< UDR error */
- HAL_I2S_ERROR_DMA = 0x08, /*!< DMA transfer error */
- HAL_I2S_ERROR_UNKNOW = 0x10 /*!< Unknow Error error */
-}HAL_I2S_ErrorTypeDef;
-
-/**
* @brief I2S handle Structure definition
*/
typedef struct
{
- SPI_TypeDef *Instance; /* I2S registers base address */
+ SPI_TypeDef *Instance; /*!< I2S registers base address */
- I2S_InitTypeDef Init; /* I2S communication parameters */
+ I2S_InitTypeDef Init; /*!< I2S communication parameters */
- uint16_t *pTxBuffPtr; /* Pointer to I2S Tx transfer buffer */
+ uint16_t *pTxBuffPtr; /*!< Pointer to I2S Tx transfer buffer */
- __IO uint16_t TxXferSize; /* I2S Tx transfer size */
+ __IO uint16_t TxXferSize; /*!< I2S Tx transfer size */
- __IO uint16_t TxXferCount; /* I2S Tx transfer Counter */
+ __IO uint16_t TxXferCount; /*!< I2S Tx transfer Counter */
- uint16_t *pRxBuffPtr; /* Pointer to I2S Rx transfer buffer */
+ uint16_t *pRxBuffPtr; /*!< Pointer to I2S Rx transfer buffer */
- __IO uint16_t RxXferSize; /* I2S Rx transfer size */
+ __IO uint16_t RxXferSize; /*!< I2S Rx transfer size */
- __IO uint16_t RxXferCount; /* I2S Rx transfer counter
+ __IO uint16_t RxXferCount; /*!< I2S Rx transfer counter
(This field is initialized at the
same value as transfer size at the
beginning of the transfer and
decremented when a sample is received.
NbSamplesReceived = RxBufferSize-RxBufferCount) */
- DMA_HandleTypeDef *hdmatx; /* I2S Tx DMA handle parameters */
+ DMA_HandleTypeDef *hdmatx; /*!< I2S Tx DMA handle parameters */
- DMA_HandleTypeDef *hdmarx; /* I2S Rx DMA handle parameters */
+ DMA_HandleTypeDef *hdmarx; /*!< I2S Rx DMA handle parameters */
- __IO HAL_LockTypeDef Lock; /* I2S locking object */
+ __IO HAL_LockTypeDef Lock; /*!< I2S locking object */
- __IO HAL_I2S_StateTypeDef State; /* I2S communication state */
+ __IO HAL_I2S_StateTypeDef State; /*!< I2S communication state */
- __IO HAL_I2S_ErrorTypeDef ErrorCode; /* I2S Error code */
+ __IO uint32_t ErrorCode; /*!< I2S Error code
+ This parameter can be a value of @ref I2S_Error */
}I2S_HandleTypeDef;
/**
@@ -161,6 +149,18 @@
/** @defgroup I2S_Exported_Constants I2S Exported Constants
* @{
*/
+/** @defgroup I2S_Error I2S Error
+ * @{
+ */
+#define HAL_I2S_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_I2S_ERROR_TIMEOUT ((uint32_t)0x00000001) /*!< Timeout error */
+#define HAL_I2S_ERROR_OVR ((uint32_t)0x00000002) /*!< OVR error */
+#define HAL_I2S_ERROR_UDR ((uint32_t)0x00000004) /*!< UDR error */
+#define HAL_I2S_ERROR_DMA ((uint32_t)0x00000008) /*!< DMA transfer error */
+#define HAL_I2S_ERROR_UNKNOW ((uint32_t)0x00000010) /*!< Unknow Error error */
+/**
+ * @}
+ */
/** @defgroup I2S_Mode I2S Mode
* @{
@@ -348,13 +348,21 @@
* @param __HANDLE__: specifies the I2S Handle.
* @retval None
*/
-#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) do{__IO uint32_t tmpreg = (__HANDLE__)->Instance->DR;\
- tmpreg = (__HANDLE__)->Instance->SR;}while(0)
+#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) do{ \
+ __IO uint32_t tmpreg; \
+ tmpreg = (__HANDLE__)->Instance->DR; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg); \
+ }while(0)
/** @brief Clears the I2S UDR pending flag.
* @param __HANDLE__: specifies the I2S Handle.
* @retval None
*/
-#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__)((__HANDLE__)->Instance->SR)
+#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__) do{\
+ __IO uint32_t tmpreg;\
+ tmpreg = ((__HANDLE__)->Instance->SR);\
+ UNUSED(tmpreg); \
+ }while(0)
/**
* @}
*/
@@ -412,7 +420,7 @@
*/
/* Peripheral Control and State functions ************************************/
HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s);
-HAL_I2S_ErrorTypeDef HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
+uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
/**
* @}
*/
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_irda.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_irda.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_irda.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief This file contains all the functions prototypes for the IRDA
* firmware library.
******************************************************************************
@@ -44,7 +44,7 @@
extern "C" {
#endif
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
@@ -107,19 +107,6 @@
HAL_IRDA_STATE_ERROR = 0x04 /*!< Error */
}HAL_IRDA_StateTypeDef;
-/**
- * @brief HAL IRDA Error Code structure definition
- */
-typedef enum
-{
- HAL_IRDA_ERROR_NONE = 0x00, /*!< No error */
- HAL_IRDA_ERROR_PE = 0x01, /*!< Parity error */
- HAL_IRDA_ERROR_NE = 0x02, /*!< Noise error */
- HAL_IRDA_ERROR_FE = 0x04, /*!< frame error */
- HAL_IRDA_ERROR_ORE = 0x08, /*!< Overrun error */
- HAL_IRDA_ERROR_DMA = 0x10 /*!< DMA transfer error */
-}HAL_IRDA_ErrorTypeDef;
-
/**
* @brief IRDA clock sources definition
*/
@@ -137,34 +124,35 @@
*/
typedef struct
{
- USART_TypeDef *Instance; /* USART registers base address */
+ USART_TypeDef *Instance; /*!< USART registers base address */
- IRDA_InitTypeDef Init; /* IRDA communication parameters */
+ IRDA_InitTypeDef Init; /*!< IRDA communication parameters */
- uint8_t *pTxBuffPtr; /* Pointer to IRDA Tx transfer Buffer */
+ uint8_t *pTxBuffPtr; /*!< Pointer to IRDA Tx transfer Buffer */
- uint16_t TxXferSize; /* IRDA Tx Transfer size */
+ uint16_t TxXferSize; /*!< IRDA Tx Transfer size */
- uint16_t TxXferCount; /* IRDA Tx Transfer Counter */
+ uint16_t TxXferCount; /*!< IRDA Tx Transfer Counter */
- uint8_t *pRxBuffPtr; /* Pointer to IRDA Rx transfer Buffer */
+ uint8_t *pRxBuffPtr; /*!< Pointer to IRDA Rx transfer Buffer */
- uint16_t RxXferSize; /* IRDA Rx Transfer size */
+ uint16_t RxXferSize; /*!< IRDA Rx Transfer size */
- uint16_t RxXferCount; /* IRDA Rx Transfer Counter */
+ uint16_t RxXferCount; /*!< IRDA Rx Transfer Counter */
- uint16_t Mask; /* USART RX RDR register mask */
+ uint16_t Mask; /*!< USART RX RDR register mask */
- DMA_HandleTypeDef *hdmatx; /* IRDA Tx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmatx; /*!< IRDA Tx DMA Handle parameters */
- DMA_HandleTypeDef *hdmarx; /* IRDA Rx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmarx; /*!< IRDA Rx DMA Handle parameters */
- HAL_LockTypeDef Lock; /* Locking object */
+ HAL_LockTypeDef Lock; /*!< Locking object */
- HAL_IRDA_StateTypeDef State; /* IRDA communication state */
+ HAL_IRDA_StateTypeDef State; /*!< IRDA communication state */
- HAL_IRDA_ErrorTypeDef ErrorCode; /* IRDA Error code */
-
+ __IO uint32_t ErrorCode; /*!< IRDA Error code
+ This parameter can be a value of @ref IRDA_Error */
+
}IRDA_HandleTypeDef;
/**
@@ -189,6 +177,19 @@
* @{
*/
+/** @defgroup IRDA_Error IRDA Error
+ * @{
+ */
+#define HAL_IRDA_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_IRDA_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */
+#define HAL_IRDA_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */
+#define HAL_IRDA_ERROR_FE ((uint32_t)0x00000004) /*!< frame error */
+#define HAL_IRDA_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */
+#define HAL_IRDA_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
/** @defgroup IRDA_Parity IRDA Parity
* @{
*/
@@ -551,7 +552,7 @@
* @}
*/
-/* Include IRDA HAL Extension module */
+/* Include IRDA HAL Extended module */
#include "stm32f0xx_hal_irda_ex.h"
/* Exported functions --------------------------------------------------------*/
@@ -618,7 +619,7 @@
* @}
*/
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#ifdef __cplusplus
}
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_irda_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_irda_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_irda_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of IRDA HAL Extension module.
******************************************************************************
* @attention
@@ -43,7 +43,7 @@
extern "C" {
#endif
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
@@ -103,7 +103,7 @@
* @retval IRDA clocking source, written in __CLOCKSOURCE__.
*/
-#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx)
+#if defined(STM32F031x6) || defined(STM32F038xx)
#define __HAL_IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
switch(__HAL_RCC_GET_USART1_SOURCE()) \
@@ -125,8 +125,7 @@
break; \
} \
} while(0)
-#elif defined (STM32F030x8) || \
- defined (STM32F042x6) || defined (STM32F048xx) || \
+#elif defined (STM32F042x6) || defined (STM32F048xx) || \
defined (STM32F051x8) || defined (STM32F058xx)
#define __HAL_IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
@@ -310,7 +309,7 @@
} \
} while(0)
-#endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */
+#endif /* defined(STM32F031x6) || defined(STM32F038xx) */
/** @brief Computes the mask to apply to retrieve the received data
@@ -404,7 +403,7 @@
* @}
*/
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#ifdef __cplusplus
}
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_iwdg.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_iwdg.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_iwdg.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of IWDG HAL module. ****************************************************************************** * @attention
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_pcd.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_pcd.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_pcd.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of PCD HAL module.
******************************************************************************
* @attention
@@ -43,7 +43,7 @@
extern "C" {
#endif
-#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx)
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)|| defined(STM32F070x6)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
@@ -98,13 +98,13 @@
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
uint32_t speed; /*!< USB Core speed.
- This parameter can be any value of @ref USB_Core_Speed */
+ This parameter can be any value of @ref PCD_Core_Speed */
uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size.
- This parameter can be any value of @ref USB_EP0_MPS */
+ This parameter can be any value of @ref PCD_EP0_MPS */
uint32_t phy_itface; /*!< Select the used PHY interface.
- This parameter can be any value of @ref USB_Core_PHY */
+ This parameter can be any value of @ref PCD_Core_PHY */
uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal.
This parameter can be set to ENABLE or DISABLE */
@@ -132,7 +132,7 @@
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
uint8_t type; /*!< Endpoint type
- This parameter can be any value of @ref USB_EP_Type */
+ This parameter can be any value of @ref PCD_EP_Type */
uint16_t pmaadress; /*!< PMA Address
This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
@@ -190,7 +190,7 @@
* @{
*/
-/** @defgroup USB_Core_Speed USB Core Speed
+/** @defgroup PCD_Core_Speed PCD Core Speed
* @{
*/
#define PCD_SPEED_HIGH 0 /* Not Supported */
@@ -199,7 +199,7 @@
* @}
*/
-/** @defgroup USB_Core_PHY USB Core PHY
+ /** @defgroup PCD_Core_PHY PCD Core PHY
* @{
*/
#define PCD_PHY_EMBEDDED 2
@@ -207,7 +207,7 @@
* @}
*/
-/** @defgroup USB_EP0_MPS USB EP0 MPS
+/** @defgroup PCD_EP0_MPS PCD EP0 MPS
* @{
*/
#define DEP0CTL_MPS_64 0
@@ -223,7 +223,7 @@
* @}
*/
-/** @defgroup USB_EP_Type USB EP Type
+/** @defgroup PCD_EP_Type PCD EP Type
* @{
*/
#define PCD_EP_TYPE_CTRL 0
@@ -234,7 +234,7 @@
* @}
*/
-/** @defgroup USB_ENDP USB ENDP
+/** @defgroup PCD_ENDP_Type PCD_ENDP_Type
* @{
*/
@@ -267,7 +267,7 @@
* @{
*/
#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISTR) & (__INTERRUPT__)) == (__INTERRUPT__))
-#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) = ~(__INTERRUPT__))
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) &= ~(__INTERRUPT__))
#define USB_EXTI_LINE_WAKEUP ((uint32_t)0x00040000) /*!< External interrupt line 18 Connected to the USB FS EXTI Line */
@@ -770,7 +770,7 @@
* @}
*/
-#endif /* STM32F042x6 || STM32F072xB || STM32F078xx */
+#endif /* STM32F042x6 || STM32F072xB || STM32F078xx || STM32F070xB || STM32F070x6 */
#ifdef __cplusplus
}
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_pcd_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_pcd_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_pcd_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of PCD HAL Extension module.
******************************************************************************
* @attention
@@ -43,7 +43,7 @@
extern "C" {
#endif
-#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx)
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx)|| defined(STM32F070xB)|| defined(STM32F070x6)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
@@ -65,8 +65,8 @@
/** @addtogroup PCDEx_Exported_Functions
* @{
*/
-/** @addtogroup PCDEx_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
+
+/** @addtogroup PCDEx_Exported_Functions_Group2
* @{
*/
@@ -90,7 +90,7 @@
* @}
*/
-#endif /* STM32F042x6 || STM32F072xB || STM32F078xx */
+#endif /* STM32F042x6 || STM32F072xB || STM32F078xx || STM32F070xB || STM32F070x6*/
#ifdef __cplusplus
}
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_pwr.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_pwr.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_pwr.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of PWR HAL module. ****************************************************************************** * @attention @@ -175,6 +175,11 @@ void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); void HAL_PWR_EnterSTANDBYMode(void); +void HAL_PWR_EnableSleepOnExit(void); +void HAL_PWR_DisableSleepOnExit(void); +void HAL_PWR_EnableSEVOnPend(void); +void HAL_PWR_DisableSEVOnPend(void); + /** * @} */
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_pwr_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_pwr_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_pwr_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of PWR HAL Extension module.
******************************************************************************
* @attention
@@ -92,8 +92,8 @@
/** @defgroup PWREx_WakeUp_Pins PWREx Wakeup Pins
* @{
*/
-#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx)
+#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define PWR_WAKEUP_PIN1 ((uint32_t)0x00)
#define PWR_WAKEUP_PIN2 ((uint32_t)0x01)
#define PWR_WAKEUP_PIN3 ((uint32_t)0x02)
@@ -117,8 +117,8 @@
#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
((PIN) == PWR_WAKEUP_PIN2))
-#endif /* defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || */
- /* defined (STM32F091xC) || defined (STM32F098xx) */
+#endif /* defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || */
+ /* defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
* @}
*/
@@ -142,9 +142,9 @@
#define PWR_EXTI_LINE_VDDIO2 ((uint32_t)0x80000000) /*!< External interrupt line 31 Connected to the Vddio2 Monitor EXTI Line */
-#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) ||\
defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx) */
+ defined (STM32F091xC) || defined (STM32F098xx) ||*/
/**
* @}
*/
@@ -204,6 +204,10 @@
#define PWR_FLAG_SB PWR_CSR_SBF
#define PWR_FLAG_PVDO PWR_CSR_PVDO
#define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF
+#elif defined (STM32F070x6) || defined (STM32F070xB) || defined (STM32F030xC)
+#define PWR_FLAG_WU PWR_CSR_WUF
+#define PWR_FLAG_SB PWR_CSR_SBF
+#define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF
#else
#define PWR_FLAG_WU PWR_CSR_WUF
#define PWR_FLAG_SB PWR_CSR_SBF
@@ -339,7 +343,7 @@
#define __HAL_PWR_VDDIO2_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_VDDIO2))
-#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) ||\
defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
defined (STM32F091xC) || defined (STM32F098xx) */
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_rcc.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_rcc.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_rcc.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of RCC HAL module.
******************************************************************************
* @attention
@@ -105,7 +105,7 @@
uint32_t HSI14CalibrationValue; /*!< The HSI14 calibration trimming value (default is RCC_HSI14CALIBRATION_DEFAULT).
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
- uint32_t HSI48State; /*!< The new state of the HSI48 (only applicable to STM32F07x and STM32F0x2 devices).
+ uint32_t HSI48State; /*!< The new state of the HSI48 (only applicable to STM32F07x, STM32F0x2 and STM32F09x devices).
This parameter can be a value of @ref RCCEx_HSI48_Config */
uint32_t LSIState; /*!< The new state of the LSI.
@@ -963,32 +963,6 @@
* @}
*/
-/** @addtogroup RCC_USARTx_Clock_Config RCC USARTx Clock Config
- * @{
- */
-/** @brief Macro to configure the USART2 clock (USART2CLK).
- * @param __USART2CLKSource__: specifies the USART2 clock source.
- * This parameter can be one of the following values:
- * @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
- * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
- * @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
- * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
- */
-#define __HAL_RCC_USART2_CONFIG(__USART2CLKSource__) \
- MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART2SW, (uint32_t)(__USART2CLKSource__))
-
-/** @brief Macro to get the USART2 clock source.
- * @retval The clock source can be one of the following values:
- * @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
- * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
- * @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
- * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
- */
-#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART2SW)))
-/**
- * @}
- */
-
/** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration
* @{
*/
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_rcc_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_rcc_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_rcc_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of RCC HAL Extension module.
******************************************************************************
* @attention
@@ -63,7 +63,8 @@
/**
* @brief RCC extended clocks structure definition
*/
-#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx)
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || \
+ defined(STM32F030xC)
typedef struct
{
uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
@@ -79,7 +80,29 @@
This parameter can be a value of @ref RCC_I2C1_Clock_Source */
}RCC_PeriphCLKInitTypeDef;
-#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx */
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx ||
+ STM32F030xC */
+
+#if defined(STM32F070x6) || defined(STM32F070xB)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t UsbClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F070x6 || STM32F070xB */
#if defined(STM32F042x6) || defined(STM32F048xx)
typedef struct
@@ -205,23 +228,9 @@
}RCC_PeriphCLKInitTypeDef;
#endif /* STM32F091xC || STM32F098xx */
-
#if defined(STM32F042x6) || defined(STM32F048xx) || \
defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
defined(STM32F091xC) || defined(STM32F098xx)
-/**
- * @brief RCC CRS Status structures definition
- */
-typedef enum
-{
- RCC_CRS_NONE = 0x00,
- RCC_CRS_TIMEOUT = 0x01,
- RCC_CRS_SYNCOK = 0x02,
- RCC_CRS_SYNCWARM = 0x04,
- RCC_CRS_SYNCERR = 0x08,
- RCC_CRS_SYNCMISS = 0x10,
- RCC_CRS_TRIMOV = 0x20
-} RCC_CRSStatusTypeDef;
/**
* @brief RCC_CRS Init structure definition
@@ -271,7 +280,7 @@
}RCC_CRSSynchroInfoTypeDef;
-#endif /* STM32F042x6 || */
+#endif /* STM32F042x6 || STM32F048xx */
/* STM32F071xB || STM32F072xB || STM32F078xx || */
/* STM32F091xC || STM32F098xx */
@@ -285,17 +294,51 @@
* @{
*/
+/** @defgroup RCCEx_CRS_Status RCCEx CRS Status
+ * @{
+ */
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define RCC_CRS_NONE ((uint32_t)0x00000000)
+#define RCC_CRS_TIMEOUT ((uint32_t)0x00000001)
+#define RCC_CRS_SYNCOK ((uint32_t)0x00000002)
+#define RCC_CRS_SYNCWARM ((uint32_t)0x00000004)
+#define RCC_CRS_SYNCERR ((uint32_t)0x00000008)
+#define RCC_CRS_SYNCMISS ((uint32_t)0x00000010)
+#define RCC_CRS_TRIMOV ((uint32_t)0x00000020)
+
+#endif /* STM32F042x6 || STM32F048xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+/**
+ * @}
+ */
+
/** @defgroup RCCEx_Periph_Clock_Selection RCCEx Periph Clock Selection
* @{
*/
-#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx)
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || \
+ defined(STM32F030xC)
#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \
RCC_PERIPHCLK_RTC))
-#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx */
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx ||
+ STM32F030xC */
+
+#if defined(STM32F070x6) || defined(STM32F070xB)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_USB ((uint32_t)0x00020000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \
+ RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_USB))
+#endif /* STM32F070x6 || STM32F070xB */
#if defined(STM32F042x6) || defined(STM32F048xx)
#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
@@ -365,7 +408,7 @@
* @{
*/
-#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx)
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || defined(STM32F070x6) || defined(STM32F070xB) || defined(STM32F030xC)
#define RCC_MCOSOURCE_PLLCLK_NODIV (RCC_CFGR_MCO_PLL | RCC_CFGR_PLLNODIV)
@@ -379,7 +422,7 @@
((SOURCE) == RCC_MCOSOURCE_PLLCLK_DIV2) || \
((SOURCE) == RCC_MCOSOURCE_HSI14))
-#endif /* STM32F030x6 || STM32F031x6 || STM32F038xx */
+#endif /* STM32F030x6 || STM32F031x6 || STM32F038xx || STM32F070x6 || STM32F070xB || STM32F030xC */
#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
@@ -442,6 +485,20 @@
#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx */
+#if defined(STM32F070x6) || defined(STM32F070xB)
+
+/** @defgroup RCCEx_USB_Clock_Source RCCEx USB Clock Source
+ * @{
+ */
+#define RCC_USBCLKSOURCE_PLLCLK RCC_CFGR3_USBSW_PLLCLK
+
+#define IS_RCC_USBCLKSOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSOURCE_PLLCLK))
+/**
+ * @}
+ */
+
+#endif /* STM32F070x6 || STM32F070xB */
+
#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
defined(STM32F091xC) || defined(STM32F098xx)
@@ -554,12 +611,16 @@
/**
* @}
*/
-
#else
/** @defgroup RCCEx_PLL_Clock_Source RCCEx PLL Clock Source
* @{
*/
+
+#if defined(STM32F070xB) || defined(STM32F070x6) || defined(STM32F030xC)
+#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_PREDIV
+#else
#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_DIV2
+#endif
#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \
((SOURCE) == RCC_PLLSOURCE_HSE))
@@ -608,10 +669,10 @@
#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
-#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || \
- defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F071xB) || \
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || defined(STM32F070x6) || \
+ defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F071xB) || defined(STM32F070xB) || \
defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define RCC_MCO_DIV1 ((uint32_t)0x00000000)
#define RCC_MCO_DIV2 ((uint32_t)0x10000000)
@@ -628,8 +689,8 @@
((DIV) == RCC_MCO_DIV64) || ((DIV) == RCC_MCO_DIV128))
#endif /* STM32F030x6 || STM32F031x6 || STM32F038xx || STM32F042x6 || STM32F048xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070x6 || STM32F070xB */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
/**
* @}
@@ -760,13 +821,13 @@
* @}
*/
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
/**
* @}
*/
-
-#endif /* STM32F042x6 || STM32F048xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
/* Exported macros ------------------------------------------------------------*/
/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros
@@ -780,29 +841,29 @@
* using it.
* @{
*/
-#if defined(STM32F030x6) || defined(STM32F030x8) || \
- defined(STM32F051x8) || defined(STM32F058xx) || \
+#if defined(STM32F030x6) || defined(STM32F030x8) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || defined(STM32F070xB) || \
defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __GPIOD_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIODEN))
#define __GPIOD_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIODEN))
-#endif /* STM32F030x6 || STM32F030x8 || */
- /* STM32F051x8 || STM32F058xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx |[ */
- /* STM32F091xC || STM32F098xx */
+#endif /* STM32F030x6 || STM32F030x8 || */
+ /* STM32F051x8 || STM32F058xx || STM32F070xB || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __GPIOE_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOEEN))
#define __GPIOE_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOEEN))
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
#if defined(STM32F042x6) || defined(STM32F048xx) || \
defined(STM32F051x8) || defined(STM32F058xx) || \
@@ -834,8 +895,8 @@
#if defined(STM32F030x8) || \
defined(STM32F042x6) || defined(STM32F048xx) || \
defined(STM32F051x8) || defined(STM32F058xx) || \
- defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __USART2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART2EN))
#define __SPI2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI2EN))
@@ -845,8 +906,8 @@
#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */
/* STM32F051x8 || STM32F058xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
#if defined(STM32F031x6) || defined(STM32F038xx) || \
defined(STM32F042x6) || defined(STM32F048xx) || \
@@ -866,8 +927,8 @@
#if defined(STM32F030x8) || \
defined(STM32F051x8) || defined(STM32F058xx) || \
- defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __TIM6_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM6EN))
#define __I2C2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C2EN))
@@ -877,8 +938,8 @@
#endif /* STM32F030x8 || */
/* STM32F051x8 || STM32F058xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
#if defined(STM32F051x8) || defined(STM32F058xx) || \
defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
@@ -906,8 +967,8 @@
/* STM32F071xB || STM32F072xB || STM32F078xx || */
/* STM32F091xC || STM32F098xx */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __TIM7_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM7EN))
#define __USART3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART3EN))
@@ -917,18 +978,18 @@
#define __USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
#define __USART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART4EN))
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
-#if defined(STM32F042x6) || defined(STM32F048xx) || \
- defined(STM32F072xB) || defined(STM32F078xx)
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
+ defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
#define __USB_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USBEN))
#define __USB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USBEN))
-#endif /* STM32F042x6 || STM32F048xx || */
- /* STM32F072xB || STM32F078xx */
+#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F072xB || STM32F078xx || STM32F070xB */
#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || \
defined(STM32F091xC) || defined(STM32F098xx)
@@ -951,40 +1012,46 @@
/* STM32F071xB || STM32F072xB || STM32F078xx || */
/* STM32F091xC || STM32F098xx */
-#if defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __USART5_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART5EN))
#define __USART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART5EN))
-#endif /* STM32F091xC || STM32F098xx */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
*/
-#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || \
+#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
defined(STM32F051x8) || defined(STM32F058xx) || \
- defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __TIM15_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM15EN))
#define __TIM15_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM15EN))
-#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */
/* STM32F051x8 || STM32F058xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __USART6_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART6EN))
+
+#define __USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN))
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
#if defined(STM32F091xC) || defined(STM32F098xx)
-#define __USART6_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART6EN))
#define __USART7_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART7EN))
#define __USART8_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART8EN))
-#define __USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN))
#define __USART7_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART7EN))
#define __USART8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART8EN))
@@ -1002,10 +1069,10 @@
/** @brief Force or release AHB peripheral reset.
*/
-#if defined(STM32F030x6) || defined(STM32F030x8) || \
- defined(STM32F051x8) || defined(STM32F058xx) || \
- defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F030x6) || defined(STM32F030x8) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __GPIOD_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIODRST))
@@ -1013,18 +1080,18 @@
#endif /* STM32F030x6 || STM32F030x8 || */
/* STM32F051x8 || STM32F058xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __GPIOE_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOERST))
#define __GPIOE_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOERST))
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
#if defined(STM32F042x6) || defined(STM32F048xx) || \
defined(STM32F051x8) || defined(STM32F058xx) || \
@@ -1043,10 +1110,10 @@
/** @brief Force or release APB1 peripheral reset.
*/
#if defined(STM32F030x8) || \
- defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
defined(STM32F051x8) || defined(STM32F058xx) || \
- defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST))
#define __SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
@@ -1054,10 +1121,10 @@
#define __USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST))
#define __SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
-#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */
/* STM32F051x8 || STM32F058xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
#if defined(STM32F031x6) || defined(STM32F038xx) || \
defined(STM32F042x6) || defined(STM32F048xx) || \
@@ -1077,8 +1144,8 @@
#if defined(STM32F030x8) || \
defined(STM32F051x8) || defined(STM32F058xx) || \
- defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) ||\
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
#define __I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
@@ -1088,8 +1155,8 @@
#endif /* STM32F030x8 || */
/* STM32F051x8 || STM32F058xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
#if defined(STM32F051x8) || defined(STM32F058xx) || \
defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
@@ -1117,8 +1184,8 @@
/* STM32F071xB || STM32F072xB || STM32F078xx || */
/* STM32F091xC || STM32F098xx */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
#define __USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
@@ -1128,18 +1195,18 @@
#define __USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
#define __USART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART4RST))
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
-#if defined(STM32F042x6) || defined(STM32F048xx) || \
- defined(STM32F072xB) || defined(STM32F078xx)
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
+ defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
#define __USB_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USBRST))
#define __USB_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USBRST))
-#endif /* STM32F042x6 || STM32F048xx || */
- /* STM32F072xB || STM32F078xx */
+#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F072xB || STM32F078xx || STM32F070xB */
#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || \
defined(STM32F091xC) || defined(STM32F098xx)
@@ -1163,38 +1230,44 @@
/* STM32F071xB || STM32F072xB || STM32F078xx || */
/* STM32F091xC || STM32F098xx */
-#if defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __USART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART5RST))
#define __USART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART5RST))
-#endif /* STM32F091xC || STM32F098xx */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
/** @brief Force or release APB2 peripheral reset.
*/
-#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || \
+#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
defined(STM32F051x8) || defined(STM32F058xx) || \
- defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __TIM15_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM15RST))
#define __TIM15_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM15RST))
-#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */
/* STM32F051x8 || STM32F058xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST))
+
+#define __USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST))
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
#if defined(STM32F091xC) || defined(STM32F098xx)
-#define __USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST))
#define __USART7_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART7RST))
#define __USART8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART8RST))
-#define __USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST))
#define __USART7_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART7RST))
#define __USART8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART8RST))
@@ -1250,13 +1323,14 @@
/** @defgroup RCCEx_Peripheral_Clock_Source_Config RCCEx Peripheral Clock Source Config
* @{
*/
-#if defined(STM32F042x6) || defined(STM32F048xx) || \
- defined(STM32F072xB) || defined(STM32F078xx)
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F070x6) || defined(STM32F070xB)
/** @brief Macro to configure the USB clock (USBCLK).
* @param __USBCLKSource__: specifies the USB clock source.
* This parameter can be one of the following values:
- * @arg RCC_USBCLKSOURCE_HSI48: HSI48 selected as USB clock
+ * @arg RCC_USBCLKSOURCE_HSI48: HSI48 selected as USB clock (not available for STM32F070x6 & STM32F070xB)
* @arg RCC_USBCLKSOURCE_PLLCLK: PLL Clock selected as USB clock
*/
#define __HAL_RCC_USB_CONFIG(__USBCLKSource__) \
@@ -1264,13 +1338,14 @@
/** @brief Macro to get the USB clock source.
* @retval The clock source can be one of the following values:
- * @arg RCC_USBCLKSOURCE_HSI48: HSI48 selected as USB clock
+ * @arg RCC_USBCLKSOURCE_HSI48: HSI48 selected as USB clock (not available for STM32F070x6 & STM32F070xB)
* @arg RCC_USBCLKSOURCE_PLLCLK: PLL Clock selected as USB clock
*/
#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USBSW)))
#endif /* STM32F042x6 || STM32F048xx || */
- /* STM32F072xB || STM32F078xx */
+ /* STM32F072xB || STM32F078xx || */
+ /* STM32F070x6 || STM32F070xB */
#if defined(STM32F042x6) || defined(STM32F048xx) || \
defined(STM32F051x8) || defined(STM32F058xx) || \
@@ -1299,9 +1374,9 @@
/* STM32F091xC || defined(STM32F098xx) */
#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || \
- defined(STM32F042x6) || defined(STM32F048xx) || \
- defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+ defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
/** @brief Macro to configure the MCO clock.
* @param __MCOCLKSource__: specifies the MCO clock source.
@@ -1348,10 +1423,33 @@
#define __HAL_RCC_MCO_CONFIG(__MCOCLKSource__, __MCODiv__) \
MODIFY_REG(RCC->CFGR, RCC_CFGR_MCO, __MCOCLKSource__)
-#endif /* STM32F030x6 || STM32F031x6 || STM32F038xx || */
- /* STM32F042x6 || STM32F048xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+#endif /* STM32F030x6 || STM32F031x6 || STM32F038xx || STM32F070x6 || */
+ /* STM32F042x6 || STM32F048xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+/** @brief Macro to configure the USART2 clock (USART2CLK).
+ * @param __USART2CLKSource__: specifies the USART2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
+ */
+#define __HAL_RCC_USART2_CONFIG(__USART2CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART2SW, (uint32_t)(__USART2CLKSource__))
+
+/** @brief Macro to get the USART2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
+ */
+#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART2SW)))
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx*/
#if defined(STM32F091xC) || defined(STM32F098xx)
/** @brief Macro to configure the USART3 clock (USART3CLK).
@@ -1374,7 +1472,7 @@
*/
#define __HAL_RCC_GET_USART3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART3SW)))
-#endif /*STM32F091xC || STM32F098xx*/
+#endif /* STM32F091xC || STM32F098xx */
/**
* @}
*/
@@ -1551,7 +1649,7 @@
void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit);
void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void);
void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo);
-RCC_CRSStatusTypeDef HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout);
+uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout);
#endif /* STM32F042x6 || STM32F048xx || */
/* STM32F071xB || STM32F072xB || STM32F078xx || */
/* STM32F091xC || STM32F098xx */
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_rtc.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_rtc.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_rtc.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of RTC HAL module. ****************************************************************************** * @attention
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_rtc_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_rtc_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_rtc_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of RTC HAL Extension module.
******************************************************************************
* @attention
@@ -116,7 +116,7 @@
* @}
*/
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB)
/** @defgroup RTCEx_Backup_Registers_Definitions RTCEx Backup Registers Definition
* @{
*/
@@ -130,7 +130,7 @@
/**
* @}
*/
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB) */
/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTCEx Time Stamp Edges definition
* @{
@@ -288,7 +288,7 @@
* @}
*/
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/** @defgroup RTCEx_Wakeup_Timer_Definitions RTCEx Wakeup Timer Definition
* @{
*/
@@ -310,7 +310,7 @@
/**
* @}
*/
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth calib period Definition
* @{
@@ -393,14 +393,14 @@
* @{
*/
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/**
* @brief Enable the RTC WakeUp Timer peripheral.
* @param __HANDLE__: specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/**
* @brief Enable the RTC TimeStamp peripheral.
@@ -409,14 +409,14 @@
*/
#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/**
* @brief Disable the RTC WakeUp Timer peripheral.
* @param __HANDLE__: specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/**
* @brief Disable the RTC TimeStamp peripheral.
@@ -463,7 +463,7 @@
*/
#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/**
* @brief Enable the RTC WakeUpTimer interrupt.
* @param __HANDLE__: specifies the RTC handle.
@@ -473,7 +473,7 @@
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/**
* @brief Disable the RTC TimeStamp interrupt.
@@ -485,7 +485,7 @@
*/
#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/**
* @brief Disable the RTC WakeUpTimer interrupt.
* @param __HANDLE__: specifies the RTC handle.
@@ -495,7 +495,7 @@
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/**
* @brief Check whether the specified RTC Tamper interrupt has occurred or not.
@@ -507,7 +507,7 @@
*/
#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/**
* @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
* @param __HANDLE__: specifies the RTC handle.
@@ -517,7 +517,7 @@
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/**
* @brief Check whether the specified RTC TimeStamp interrupt has occurred or not.
@@ -540,7 +540,7 @@
*/
#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/**
* @brief Get the selected RTC WakeUpTimer's flag status.
* @param __HANDLE__: specifies the RTC handle.
@@ -551,7 +551,7 @@
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/**
* @brief Get the selected RTC Tamper's flag status.
@@ -593,7 +593,7 @@
*/
#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/**
* @brief Clear the RTC Wake Up timer's pending flags.
* @param __HANDLE__: specifies the RTC handle.
@@ -603,7 +603,7 @@
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/**
* @}
*/
@@ -630,21 +630,21 @@
void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc);
#endif
void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
#endif
/**
* @}
*/
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/** @addtogroup RTCEx_Exported_Functions_Group2
* @{
*/
@@ -667,10 +667,10 @@
*/
/* Extension Control functions ************************************************/
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB)
void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
-#endif
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB) */
HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue);
HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_smartcard.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_smartcard.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_smartcard.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of SMARTCARD HAL module.
******************************************************************************
* @attention
@@ -43,7 +43,7 @@
extern "C" {
#endif
-#if !defined(STM32F030x4) && !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
@@ -106,7 +106,7 @@
uint16_t NACKEnable; /*!< Specifies whether the SmartCard NACK transmission is enabled
in case of parity error.
- This parameter can be a value of @ref SMARTCARD_NACK_State */
+ This parameter can be a value of @ref SMARTCARD_NACK_Enable */
uint32_t TimeOutEnable; /*!< Specifies whether the receiver timeout is enabled.
This parameter can be a value of @ref SMARTCARD_Timeout_Enable*/
@@ -173,20 +173,6 @@
}HAL_SMARTCARD_StateTypeDef;
/**
- * @brief HAL SMARTCARD Error Code structure definition
- */
-typedef enum
-{
- HAL_SMARTCARD_ERROR_NONE = 0x00, /*!< No error */
- HAL_SMARTCARD_ERROR_PE = 0x01, /*!< Parity error */
- HAL_SMARTCARD_ERROR_NE = 0x02, /*!< Noise error */
- HAL_SMARTCARD_ERROR_FE = 0x04, /*!< frame error */
- HAL_SMARTCARD_ERROR_ORE = 0x08, /*!< Overrun error */
- HAL_SMARTCARD_ERROR_DMA = 0x10, /*!< DMA transfer error */
- HAL_SMARTCARD_ERROR_RTO = 0x20 /*!< Receiver TimeOut error */
-}HAL_SMARTCARD_ErrorTypeDef;
-
-/**
* @brief SMARTCARD clock sources
*/
typedef enum
@@ -203,33 +189,34 @@
*/
typedef struct
{
- USART_TypeDef *Instance; /* USART registers base address */
+ USART_TypeDef *Instance; /*!< USART registers base address */
- SMARTCARD_InitTypeDef Init; /* SmartCard communication parameters */
+ SMARTCARD_InitTypeDef Init; /*!< SmartCard communication parameters */
- SMARTCARD_AdvFeatureInitTypeDef AdvancedInit; /* SmartCard advanced features initialization parameters */
+ SMARTCARD_AdvFeatureInitTypeDef AdvancedInit; /*!< SmartCard advanced features initialization parameters */
- uint8_t *pTxBuffPtr; /* Pointer to SmartCard Tx transfer Buffer */
+ uint8_t *pTxBuffPtr; /*!< Pointer to SmartCard Tx transfer Buffer */
- uint16_t TxXferSize; /* SmartCard Tx Transfer size */
+ uint16_t TxXferSize; /*!< SmartCard Tx Transfer size */
- uint16_t TxXferCount; /* SmartCard Tx Transfer Counter */
+ uint16_t TxXferCount; /*!< SmartCard Tx Transfer Counter */
- uint8_t *pRxBuffPtr; /* Pointer to SmartCard Rx transfer Buffer */
+ uint8_t *pRxBuffPtr; /*!< Pointer to SmartCard Rx transfer Buffer */
- uint16_t RxXferSize; /* SmartCard Rx Transfer size */
+ uint16_t RxXferSize; /*!< SmartCard Rx Transfer size */
- uint16_t RxXferCount; /* SmartCard Rx Transfer Counter */
+ uint16_t RxXferCount; /*!< SmartCard Rx Transfer Counter */
- DMA_HandleTypeDef *hdmatx; /* SmartCard Tx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmatx; /*!< SmartCard Tx DMA Handle parameters */
- DMA_HandleTypeDef *hdmarx; /* SmartCard Rx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmarx; /*!< SmartCard Rx DMA Handle parameters */
- HAL_LockTypeDef Lock; /* Locking object */
+ HAL_LockTypeDef Lock; /*!< Locking object */
- HAL_SMARTCARD_StateTypeDef State; /* SmartCard communication state */
+ HAL_SMARTCARD_StateTypeDef State; /*!< SmartCard communication state */
- HAL_SMARTCARD_ErrorTypeDef ErrorCode; /* SmartCard Error code */
+ __IO uint32_t ErrorCode; /*!< SmartCard Error code
+ This parameter can be a value of @ref SMARTCARD_Error */
}SMARTCARD_HandleTypeDef;
@@ -242,6 +229,20 @@
* @{
*/
+/** @defgroup SMARTCARD_Error SMARTCARD Error
+ * @{
+ */
+#define HAL_SMARTCARD_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_SMARTCARD_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */
+#define HAL_SMARTCARD_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */
+#define HAL_SMARTCARD_ERROR_FE ((uint32_t)0x00000004) /*!< frame error */
+#define HAL_SMARTCARD_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */
+#define HAL_SMARTCARD_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+#define HAL_SMARTCARD_ERROR_RTO ((uint32_t)0x00000020) /*!< Receiver TimeOut error */
+/**
+ * @}
+ */
+
/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length
* @{
*/
@@ -324,7 +325,8 @@
* @}
*/
-/** @defgroup SMARTCARD_NACK_State SMARTCARD NACK State
+
+/** @defgroup SMARTCARD_NACK_Enable SMARTCARD NACK Enable
* @{
*/
#define SMARTCARD_NACK_ENABLED ((uint16_t)USART_CR3_NACK)
@@ -741,7 +743,7 @@
* @}
*/
-/* Include SMARTCARD HAL Extension module */
+/* Include SMARTCARD HAL Extended module */
#include "stm32f0xx_hal_smartcard_ex.h"
@@ -804,7 +806,7 @@
* @}
*/
-#endif /* !defined(STM32F030x4) && !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#ifdef __cplusplus
}
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_smartcard_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_smartcard_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_smartcard_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of SMARTCARD HAL module.
******************************************************************************
* @attention
@@ -43,7 +43,7 @@
extern "C" {
#endif
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
@@ -318,7 +318,7 @@
* @}
*/
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#ifdef __cplusplus
}
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_smbus.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_smbus.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_smbus.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of SMBUS HAL module.
******************************************************************************
* @attention
@@ -104,42 +104,6 @@
} SMBUS_InitTypeDef;
/**
- * @brief HAL State structures definition
- */
-typedef enum
-{
- HAL_SMBUS_STATE_RESET = 0x00, /*!< SMBUS not yet initialized or disabled */
- HAL_SMBUS_STATE_READY = 0x01, /*!< SMBUS initialized and ready for use */
- HAL_SMBUS_STATE_BUSY = 0x02, /*!< SMBUS internal process is ongoing */
- HAL_SMBUS_STATE_MASTER_BUSY_TX = 0x12, /*!< Master Data Transmission process is ongoing */
- HAL_SMBUS_STATE_MASTER_BUSY_RX = 0x22, /*!< Master Data Reception process is ongoing */
- HAL_SMBUS_STATE_SLAVE_BUSY_TX = 0x32, /*!< Slave Data Transmission process is ongoing */
- HAL_SMBUS_STATE_SLAVE_BUSY_RX = 0x42, /*!< Slave Data Reception process is ongoing */
- HAL_SMBUS_STATE_TIMEOUT = 0x03, /*!< Timeout state */
- HAL_SMBUS_STATE_ERROR = 0x04, /*!< Reception process is ongoing */
- HAL_SMBUS_STATE_SLAVE_LISTEN = 0x08, /*!< Address Listen Mode is ongoing */
- /* Aliases for inter STM32 series compatibility */
- HAL_SMBUS_STATE_LISTEN = HAL_SMBUS_STATE_SLAVE_LISTEN
-}HAL_SMBUS_StateTypeDef;
-
-/**
- * @brief HAL SMBUS Error Code structure definition
- */
-typedef enum
-{
- HAL_SMBUS_ERROR_NONE = 0x00, /*!< No error */
- HAL_SMBUS_ERROR_BERR = 0x01, /*!< BERR error */
- HAL_SMBUS_ERROR_ARLO = 0x02, /*!< ARLO error */
- HAL_SMBUS_ERROR_ACKF = 0x04, /*!< ACKF error */
- HAL_SMBUS_ERROR_OVR = 0x08, /*!< OVR error */
- HAL_SMBUS_ERROR_HALTIMEOUT = 0x10, /*!< Timeout error */
- HAL_SMBUS_ERROR_BUSTIMEOUT = 0x20, /*!< Bus Timeout error */
- HAL_SMBUS_ERROR_ALERT = 0x40, /*!< Alert error */
- HAL_SMBUS_ERROR_PECERR = 0x80 /*!< PEC error */
-
-}HAL_SMBUS_ErrorTypeDef;
-
-/**
* @brief SMBUS handle Structure definition
*/
typedef struct
@@ -156,13 +120,16 @@
__IO uint32_t XferOptions; /*!< SMBUS transfer options */
- __IO HAL_SMBUS_StateTypeDef PreviousState; /*!< SMBUS communication Previous tate */
+ __IO uint32_t PreviousState; /*!< SMBUS communication Previous state
+ This parameter can be a value of @ref SMBUS_State */
HAL_LockTypeDef Lock; /*!< SMBUS locking object */
- __IO HAL_SMBUS_StateTypeDef State; /*!< SMBUS communication state */
+ __IO uint32_t State; /*!< SMBUS communication state
+ This parameter can be a value of @ref SMBUS_State */
- __IO HAL_SMBUS_ErrorTypeDef ErrorCode; /*!< SMBUS Error code */
+ __IO uint32_t ErrorCode; /*!< SMBUS Error code
+ This parameter can be a value of @ref SMBUS_Error */
}SMBUS_HandleTypeDef;
/**
@@ -175,6 +142,43 @@
* @{
*/
+/** @defgroup SMBUS_Error SMBUS Error
+ * @{
+ */
+#define HAL_SMBUS_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_SMBUS_ERROR_BERR ((uint32_t)0x00000001) /*!< BERR error */
+#define HAL_SMBUS_ERROR_ARLO ((uint32_t)0x00000002) /*!< ARLO error */
+#define HAL_SMBUS_ERROR_ACKF ((uint32_t)0x00000004) /*!< ACKF error */
+#define HAL_SMBUS_ERROR_OVR ((uint32_t)0x00000008) /*!< OVR error */
+#define HAL_SMBUS_ERROR_HALTIMEOUT ((uint32_t)0x00000010) /*!< Timeout error */
+#define HAL_SMBUS_ERROR_BUSTIMEOUT ((uint32_t)0x00000020) /*!< Bus Timeout error */
+#define HAL_SMBUS_ERROR_ALERT ((uint32_t)0x00000040) /*!< Alert error */
+#define HAL_SMBUS_ERROR_PECERR ((uint32_t)0x00000080) /*!< PEC error */
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_State SMBUS State
+ * @{
+ */
+
+#define HAL_SMBUS_STATE_RESET ((uint32_t)0x00000000) /*!< SMBUS not yet initialized or disabled */
+#define HAL_SMBUS_STATE_READY ((uint32_t)0x00000001) /*!< SMBUS initialized and ready for use */
+#define HAL_SMBUS_STATE_BUSY ((uint32_t)0x00000002) /*!< SMBUS internal process is ongoing */
+#define HAL_SMBUS_STATE_MASTER_BUSY_TX ((uint32_t)0x00000012) /*!< Master Data Transmission process is ongoing */
+#define HAL_SMBUS_STATE_MASTER_BUSY_RX ((uint32_t)0x00000022) /*!< Master Data Reception process is ongoing */
+#define HAL_SMBUS_STATE_SLAVE_BUSY_TX ((uint32_t)0x00000032) /*!< Slave Data Transmission process is ongoing */
+#define HAL_SMBUS_STATE_SLAVE_BUSY_RX ((uint32_t)0x00000042) /*!< Slave Data Reception process is ongoing */
+#define HAL_SMBUS_STATE_TIMEOUT ((uint32_t)0x00000003) /*!< Timeout state */
+#define HAL_SMBUS_STATE_ERROR ((uint32_t)0x00000004) /*!< Reception process is ongoing */
+#define HAL_SMBUS_STATE_SLAVE_LISTEN ((uint32_t)0x00000008) /*!< Address Listen Mode is ongoing */
+ /* Aliases for inter STM32 series compatibility */
+#define HAL_SMBUS_STATE_LISTEN HAL_SMBUS_STATE_SLAVE_LISTEN
+
+/**
+ * @}
+ */
+
/** @defgroup SMBUS_Analog_Filter SMBUS Analog Filter
* @{
*/
@@ -584,8 +588,8 @@
*/
/* Peripheral State and Errors functions **************************************************/
-HAL_SMBUS_StateTypeDef HAL_SMBUS_GetState(SMBUS_HandleTypeDef *hsmbus);
-uint32_t HAL_SMBUS_GetError(SMBUS_HandleTypeDef *hsmbus);
+uint32_t HAL_SMBUS_GetState(SMBUS_HandleTypeDef *hsmbus);
+uint32_t HAL_SMBUS_GetError(SMBUS_HandleTypeDef *hsmbus);
/**
* @}
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_spi.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_spi.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_spi.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of SPI HAL module.
******************************************************************************
* @attention
@@ -106,6 +106,7 @@
This parameter must 0 or 1 or 2*/
uint32_t NSSPMode; /*!< Specifies whether the NSSP signal is enabled or not .
+ This parameter can be a value of @ref SPI_NSSP_Mode
This mode is activated by the NSSP bit in the SPIx_CR2 register and
it takes effect only if the SPI interface is configured as Motorola SPI
master (FRF=0) with capture on the first edge (SPIx_CR1 CPHA = 0,
@@ -117,68 +118,52 @@
*/
typedef enum
{
- HAL_SPI_STATE_RESET = 0x00, /*!< Peripheral not Initialized */
+ HAL_SPI_STATE_RESET = 0x00, /*!< Peripheral not Initialized */
HAL_SPI_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
HAL_SPI_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
- HAL_SPI_STATE_BUSY_TX = 0x03, /*!< Data Transmission process is ongoing */
+ HAL_SPI_STATE_BUSY_TX = 0x03, /*!< Data Transmission process is ongoing */
HAL_SPI_STATE_BUSY_RX = 0x04, /*!< Data Reception process is ongoing */
- HAL_SPI_STATE_BUSY_TX_RX = 0x05, /*!< Data Transmission and Reception process is ongoing */
- HAL_SPI_STATE_TIMEOUT = 0x06, /*!< Timeout state */
- HAL_SPI_STATE_ERROR = 0x07 /*!< Data Transmission and Reception process is ongoing */
-
+ HAL_SPI_STATE_BUSY_TX_RX = 0x05, /*!< Data Transmission and Reception process is ongoing */
+ HAL_SPI_STATE_ERROR = 0x06 /*!< SPI error state */
}HAL_SPI_StateTypeDef;
/**
- * @brief HAL SPI Error Code structure definition
- */
-typedef enum
-{
- HAL_SPI_ERROR_NONE = 0x00, /*!< No error */
- HAL_SPI_ERROR_MODF = 0x01, /*!< MODF error */
- HAL_SPI_ERROR_CRC = 0x02, /*!< CRC error */
- HAL_SPI_ERROR_OVR = 0x04, /*!< OVR error */
- HAL_SPI_ERROR_FRE = 0x08, /*!< FRE error */
- HAL_SPI_ERROR_DMA = 0x10, /*!< DMA transfer error */
- HAL_SPI_ERROR_FLAG = 0x20, /*!< Error on BSY/TXE/FTLVL/FRLVL Flag */
- HAL_SPI_ERROR_UNKNOW = 0x40, /*!< Unknow Error error */
-}HAL_SPI_ErrorTypeDef;
-
-/**
* @brief SPI handle Structure definition
*/
typedef struct __SPI_HandleTypeDef
{
- SPI_TypeDef *Instance; /* SPI registers base address */
+ SPI_TypeDef *Instance; /*!< SPI registers base address */
- SPI_InitTypeDef Init; /* SPI communication parameters */
+ SPI_InitTypeDef Init; /*!< SPI communication parameters */
- uint8_t *pTxBuffPtr; /* Pointer to SPI Tx transfer Buffer */
+ uint8_t *pTxBuffPtr; /*!< Pointer to SPI Tx transfer Buffer */
- uint16_t TxXferSize; /* SPI Tx Transfer size */
+ uint16_t TxXferSize; /*!< SPI Tx Transfer size */
- uint16_t TxXferCount; /* SPI Tx Transfer Counter */
+ uint16_t TxXferCount; /*!< SPI Tx Transfer Counter */
- uint8_t *pRxBuffPtr; /* Pointer to SPI Rx transfer Buffer */
+ uint8_t *pRxBuffPtr; /*!< Pointer to SPI Rx transfer Buffer */
- uint16_t RxXferSize; /* SPI Rx Transfer size */
+ uint16_t RxXferSize; /*!< SPI Rx Transfer size */
- uint16_t RxXferCount; /* SPI Rx Transfer Counter */
+ uint16_t RxXferCount; /*!< SPI Rx Transfer Counter */
- uint32_t CRCSize; /* SPI CRC size used for the transfer */
+ uint32_t CRCSize; /*!< SPI CRC size used for the transfer */
- void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /* function pointer on Rx IRQ handler */
+ void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Rx IRQ handler */
- void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /* function pointer on Tx IRQ handler */
+ void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Tx IRQ handler */
- DMA_HandleTypeDef *hdmatx; /* SPI Tx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmatx; /*!< SPI Tx DMA Handle parameters */
- DMA_HandleTypeDef *hdmarx; /* SPI Rx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmarx; /*!< SPI Rx DMA Handle parameters */
- HAL_LockTypeDef Lock; /* Locking object */
+ HAL_LockTypeDef Lock; /*!< Locking object */
- HAL_SPI_StateTypeDef State; /* SPI communication state */
+ HAL_SPI_StateTypeDef State; /*!< SPI communication state */
- HAL_SPI_ErrorTypeDef ErrorCode; /* SPI Error code */
+ __IO uint32_t ErrorCode; /*!< SPI Error code
+ This parameter can be a value of @ref SPI_Error */
}SPI_HandleTypeDef;
@@ -192,10 +177,24 @@
* @{
*/
+/** @defgroup SPI_Error SPI Error
+ * @{
+ */
+ #define HAL_SPI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+ #define HAL_SPI_ERROR_MODF ((uint32_t)0x00000001) /*!< MODF error */
+ #define HAL_SPI_ERROR_CRC ((uint32_t)0x00000002) /*!< CRC error */
+ #define HAL_SPI_ERROR_OVR ((uint32_t)0x00000004) /*!< OVR error */
+ #define HAL_SPI_ERROR_FRE ((uint32_t)0x00000008) /*!< FRE error */
+ #define HAL_SPI_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+ #define HAL_SPI_ERROR_FLAG ((uint32_t)0x00000020) /*!< Error on BSY/TXE/FTLVL/FRLVL Flag */
+ #define HAL_SPI_ERROR_UNKNOW ((uint32_t)0x00000040) /*!< Unknow Error error */
+/**
+ * @}
+ */
+
/** @defgroup SPI_mode SPI mode
* @{
*/
-
#define SPI_MODE_SLAVE ((uint32_t)0x00000000)
#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI)
#define IS_SPI_MODE(MODE) (((MODE) == SPI_MODE_SLAVE) || \
@@ -223,23 +222,22 @@
* @}
*/
-/** @defgroup SPI_data_size SPI data size
+/** @defgroup SPI_data_size SPI Data size
* @{
*/
-
-#define SPI_DATASIZE_4BIT ((uint16_t)0x0300)
-#define SPI_DATASIZE_5BIT ((uint16_t)0x0400)
-#define SPI_DATASIZE_6BIT ((uint16_t)0x0500)
-#define SPI_DATASIZE_7BIT ((uint16_t)0x0600)
-#define SPI_DATASIZE_8BIT ((uint16_t)0x0700)
-#define SPI_DATASIZE_9BIT ((uint16_t)0x0800)
-#define SPI_DATASIZE_10BIT ((uint16_t)0x0900)
-#define SPI_DATASIZE_11BIT ((uint16_t)0x0A00)
-#define SPI_DATASIZE_12BIT ((uint16_t)0x0B00)
-#define SPI_DATASIZE_13BIT ((uint16_t)0x0C00)
-#define SPI_DATASIZE_14BIT ((uint16_t)0x0D00)
-#define SPI_DATASIZE_15BIT ((uint16_t)0x0E00)
-#define SPI_DATASIZE_16BIT ((uint16_t)0x0F00)
+#define SPI_DATASIZE_4BIT ((uint32_t)0x0300) /*!< SPI Datasize = 4bits */
+#define SPI_DATASIZE_5BIT ((uint32_t)0x0400) /*!< SPI Datasize = 5bits */
+#define SPI_DATASIZE_6BIT ((uint32_t)0x0500) /*!< SPI Datasize = 6bits */
+#define SPI_DATASIZE_7BIT ((uint32_t)0x0600) /*!< SPI Datasize = 7bits */
+#define SPI_DATASIZE_8BIT ((uint32_t)0x0700) /*!< SPI Datasize = 8bits */
+#define SPI_DATASIZE_9BIT ((uint32_t)0x0800) /*!< SPI Datasize = 9bits */
+#define SPI_DATASIZE_10BIT ((uint32_t)0x0900) /*!< SPI Datasize = 10bits */
+#define SPI_DATASIZE_11BIT ((uint32_t)0x0A00) /*!< SPI Datasize = 11bits */
+#define SPI_DATASIZE_12BIT ((uint32_t)0x0B00) /*!< SPI Datasize = 12bits */
+#define SPI_DATASIZE_13BIT ((uint32_t)0x0C00) /*!< SPI Datasize = 13bits */
+#define SPI_DATASIZE_14BIT ((uint32_t)0x0D00) /*!< SPI Datasize = 14bits */
+#define SPI_DATASIZE_15BIT ((uint32_t)0x0E00) /*!< SPI Datasize = 15bits */
+#define SPI_DATASIZE_16BIT ((uint32_t)0x0F00) /*!< SPI Datasize = 16bits */
#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DATASIZE_16BIT) || \
((DATASIZE) == SPI_DATASIZE_15BIT) || \
((DATASIZE) == SPI_DATASIZE_14BIT) || \
@@ -261,9 +259,8 @@
/** @defgroup SPI_Clock_Polarity SPI Clock Polarity
* @{
*/
-
-#define SPI_POLARITY_LOW ((uint32_t)0x00000000)
-#define SPI_POLARITY_HIGH SPI_CR1_CPOL
+#define SPI_POLARITY_LOW ((uint32_t)0x00000000) /*!< SPI polarity Low */
+#define SPI_POLARITY_HIGH SPI_CR1_CPOL /*!< SPI polarity High */
#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_POLARITY_LOW) || \
((CPOL) == SPI_POLARITY_HIGH))
/**
@@ -273,9 +270,8 @@
/** @defgroup SPI_Clock_Phase SPI Clock Phase
* @{
*/
-
-#define SPI_PHASE_1EDGE ((uint32_t)0x00000000)
-#define SPI_PHASE_2EDGE SPI_CR1_CPHA
+#define SPI_PHASE_1EDGE ((uint32_t)0x00000000) /*!< SPI Phase 1EDGE */
+#define SPI_PHASE_2EDGE SPI_CR1_CPHA /*!< SPI Phase 2EDGE */
#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_PHASE_1EDGE) || \
((CPHA) == SPI_PHASE_2EDGE))
/**
@@ -285,19 +281,17 @@
/** @defgroup SPI_Slave_Select_management SPI Slave Select management
* @{
*/
-
#define SPI_NSS_SOFT SPI_CR1_SSM
#define SPI_NSS_HARD_INPUT ((uint32_t)0x00000000)
#define SPI_NSS_HARD_OUTPUT ((uint32_t)0x00040000)
#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_SOFT) || \
((NSS) == SPI_NSS_HARD_INPUT) || \
((NSS) == SPI_NSS_HARD_OUTPUT))
-
/**
* @}
*/
-/** @defgroup SPI_NSS_pulse_management SPI NSS pulse management
+/** @defgroup SPI_NSSP_Mode SPI NSS pulse management
* @{
*/
#define SPI_NSS_PULSE_ENABLED SPI_CR2_NSSP
@@ -305,16 +299,13 @@
#define IS_SPI_NSSP(NSSP) (((NSSP) == SPI_NSS_PULSE_ENABLED) || \
((NSSP) == SPI_NSS_PULSE_DISABLED))
-
/**
* @}
*/
-
/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler
* @{
*/
-
#define SPI_BAUDRATEPRESCALER_2 ((uint32_t)0x00000000)
#define SPI_BAUDRATEPRESCALER_4 ((uint32_t)0x00000008)
#define SPI_BAUDRATEPRESCALER_8 ((uint32_t)0x00000010)
@@ -338,7 +329,6 @@
/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB transmission
* @{
*/
-
#define SPI_FIRSTBIT_MSB ((uint32_t)0x00000000)
#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST
#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FIRSTBIT_MSB) || \
@@ -350,7 +340,6 @@
/** @defgroup SPI_TI_mode SPI TI mode
* @{
*/
-
#define SPI_TIMODE_DISABLED ((uint32_t)0x00000000)
#define SPI_TIMODE_ENABLED SPI_CR2_FRF
#define IS_SPI_TIMODE(MODE) (((MODE) == SPI_TIMODE_DISABLED) || \
@@ -362,7 +351,6 @@
/** @defgroup SPI_CRC_Calculation SPI CRC Calculation
* @{
*/
-
#define SPI_CRCCALCULATION_DISABLED ((uint32_t)0x00000000)
#define SPI_CRCCALCULATION_ENABLED SPI_CR1_CRCEN
#define IS_SPI_CRC_CALCULATION(CALCULATION) (((CALCULATION) == SPI_CRCCALCULATION_DISABLED) || \
@@ -391,11 +379,11 @@
/** @defgroup SPI_FIFO_reception_threshold SPI FIFO reception threshold
* @{
* This parameter can be one of the following values:
- * SPI_RxFIFOThreshold_HF: RXNE event is generated if the FIFO
+ * SPI_RXFIFO_THRESHOLD or SPI_RXFIFO_THRESHOLD_QF :
+ * RXNE event is generated if the FIFO
* level is greater or equal to 1/2(16-bits).
- * SPI_RxFIFOThreshold_QF: RXNE event is generated if the FIFO
- * level is greater or equal to 1/4(8 bits).
- */
+ * SPI_RXFIFO_THRESHOLD_HF: RXNE event is generated if the FIFO
+ * level is greater or equal to 1/4(8 bits). */
#define SPI_RXFIFO_THRESHOLD SPI_CR2_FRXTH
#define SPI_RXFIFO_THRESHOLD_QF SPI_CR2_FRXTH
#define SPI_RXFIFO_THRESHOLD_HF ((uint32_t)0x0)
@@ -408,8 +396,8 @@
* @brief SPI Interrupt definition
* Elements values convention: 0xXXXXXXXX
* - XXXXXXXX : Interrupt control mask
- * @{
- */
+ * @{
+ */
#define SPI_IT_TXE SPI_CR2_TXEIE
#define SPI_IT_RXNE SPI_CR2_RXNEIE
#define SPI_IT_ERR SPI_CR2_ERRIE
@@ -441,12 +429,11 @@
/** @defgroup SPI_transmission_fifo_status_level SPI transmission fifo status level
* @{
*/
+#define SPI_FTLVL_EMPTY ((uint32_t)0x0000)
+#define SPI_FTLVL_QUARTER_FULL ((uint32_t)0x0800)
+#define SPI_FTLVL_HALF_FULL ((uint32_t)0x1000)
+#define SPI_FTLVL_FULL ((uint32_t)0x1800)
-#define SPI_FTLVL_EMPTY ((uint16_t)0x0000)
-#define SPI_FTLVL_QUARTER_FULL ((uint16_t)0x0800)
-#define SPI_FTLVL_HALF_FULL ((uint16_t)0x1000)
-#define SPI_FTLVL_FULL ((uint16_t)0x1800)
-
/**
* @}
*/
@@ -454,11 +441,10 @@
/** @defgroup SPI_reception_fifo_status_level SPI reception fifo status level
* @{
*/
-#define SPI_FRLVL_EMPTY ((uint16_t)0x0000)
-#define SPI_FRLVL_QUARTER_FULL ((uint16_t)0x0200)
-#define SPI_FRLVL_HALF_FULL ((uint16_t)0x0400)
-#define SPI_FRLVL_FULL ((uint16_t)0x0600)
-
+#define SPI_FRLVL_EMPTY ((uint32_t)0x0000)
+#define SPI_FRLVL_QUARTER_FULL ((uint32_t)0x0200)
+#define SPI_FRLVL_HALF_FULL ((uint32_t)0x0400)
+#define SPI_FRLVL_FULL ((uint32_t)0x0600)
/**
* @}
*/
@@ -480,23 +466,22 @@
#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
/** @brief Enables or disables the specified SPI interrupts.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * @param __INTERRUPT__ : specifies the interrupt source to enable or disable.
* This parameter can be one of the following values:
* @arg SPI_IT_TXE: Tx buffer empty interrupt enable
* @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
* @arg SPI_IT_ERR: Error interrupt enable
* @retval None
*/
-
#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
-#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (uint16_t)(~(__INTERRUPT__)))
+#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__)))
/** @brief Checks if the specified SPI interrupt source is enabled or disabled.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @param __INTERRUPT__: specifies the SPI interrupt source to check.
+ * @param __INTERRUPT__ : specifies the SPI interrupt source to check.
* This parameter can be one of the following values:
* @arg SPI_IT_TXE: Tx buffer empty interrupt enable
* @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
@@ -506,9 +491,9 @@
#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
/** @brief Checks whether the specified SPI flag is set or not.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @param __FLAG__: specifies the flag to check.
+ * @param __FLAG__ : specifies the flag to check.
* This parameter can be one of the following values:
* @arg SPI_FLAG_RXNE: Receive buffer not empty flag
* @arg SPI_FLAG_TXE: Transmit buffer empty flag
@@ -517,73 +502,86 @@
* @arg SPI_FLAG_OVR: Overrun flag
* @arg SPI_FLAG_BSY: Busy flag
* @arg SPI_FLAG_FRE: Frame format error flag
+ * @arg SPI_FLAG_FTLVL: SPI fifo transmission level
+ * @arg SPI_FLAG_FRLVL: SPI fifo reception level
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
/** @brief Clears the SPI CRCERR pending flag.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR))
/** @brief Clears the SPI MODF pending flag.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
*
* @retval None
*/
-#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) do{(__HANDLE__)->Instance->SR;\
- (__HANDLE__)->Instance->CR1 &= (uint16_t)(~SPI_CR1_SPE);}while(0)
+#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) do{\
+ __IO uint32_t tmpreg;\
+ tmpreg = (__HANDLE__)->Instance->SR;\
+ UNUSED(tmpreg); \
+ (__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE);\
+ }while(0)
/** @brief Clears the SPI OVR pending flag.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
*
* @retval None
*/
-#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) do{(__HANDLE__)->Instance->DR;\
- (__HANDLE__)->Instance->SR;}while(0)
-
+#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) do{ \
+ __IO uint32_t tmpreg; \
+ tmpreg = (__HANDLE__)->Instance->DR; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg); \
+ } while(0)
+
/** @brief Clears the SPI FRE pending flag.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
*
* @retval None
*/
-#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR)
-
+#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) do{\
+ __IO uint32_t tmpreg;\
+ tmpreg = ((__HANDLE__)->Instance->SR);\
+ UNUSED(tmpreg); \
+ }while(0)
/** @brief Enables the SPI.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
#define __HAL_SPI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_SPE)
/** @brief Disables the SPI.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
-#define __HAL_SPI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (uint16_t)(~SPI_CR1_SPE))
+#define __HAL_SPI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE))
/** @brief Sets the SPI transmit-only mode.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
#define __HAL_SPI_1LINE_TX(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_BIDIOE)
/** @brief Sets the SPI receive-only mode.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
-#define __HAL_SPI_1LINE_RX(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (uint16_t)(~SPI_CR1_BIDIOE))
+#define __HAL_SPI_1LINE_RX(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (~SPI_CR1_BIDIOE))
/** @brief Resets the CRC calculation of the SPI.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
@@ -629,10 +627,18 @@
HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_FlushRxFifo(SPI_HandleTypeDef *hspi);
+
void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi);
void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi);
void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi);
void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi);
void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
/**
* @}
@@ -644,6 +650,7 @@
/* Peripheral State and Error functions ***************************************/
HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi);
+uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
/**
* @}
*/
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_tim.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_tim.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_tim.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of TIM HAL module.
******************************************************************************
* @attention
@@ -290,7 +290,7 @@
TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */
HAL_TIM_ActiveChannel Channel; /*!< Active channel */
DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array
- This array is accessed by a @ref DMA_Handle_index */
+ This array is accessed by a @ref TIM_DMA_Handle_index */
HAL_LockTypeDef Lock; /*!< Locking object */
__IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */
}TIM_HandleTypeDef;
@@ -1117,7 +1117,7 @@
* @}
*/
-/** @defgroup DMA_Handle_index TIM DMA Handle Index
+/** @defgroup TIM_DMA_Handle_index TIM DMA Handle Index
* @{
*/
#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0) /*!< Index of the DMA handle used for Update DMA requests */
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_tim_ex.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_tim_ex.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_tim_ex.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of TIM HAL Extended module. ****************************************************************************** * @attention
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_tsc.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_tsc.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_tsc.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief This file contains all the functions prototypes for the TSC firmware * library. ******************************************************************************
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_uart.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_uart.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_uart.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of UART HAL module.
******************************************************************************
* @attention
@@ -142,22 +142,6 @@
} UART_AdvFeatureInitTypeDef;
/**
- * @brief UART wake up from stop mode parameters
- */
-typedef struct
-{
- uint32_t WakeUpEvent; /*!< Specifies which event will activat the Wakeup from Stop mode flag (WUF).
- This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection.
- If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must
- be filled up. */
-
- uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long.
- This parameter can be a value of @ref UART_WakeUp_Address_Length */
-
- uint8_t Address; /*!< UART/USART node address (7-bit long max) */
-} UART_WakeUpTypeDef;
-
-/**
* @brief HAL UART State structures definition
*/
typedef enum
@@ -172,19 +156,6 @@
HAL_UART_STATE_ERROR = 0x04 /*!< Error */
}HAL_UART_StateTypeDef;
-/**
- * @brief HAL UART Error Code structure definition
- */
-typedef enum
-{
- HAL_UART_ERROR_NONE = 0x00, /*!< No error */
- HAL_UART_ERROR_PE = 0x01, /*!< Parity error */
- HAL_UART_ERROR_NE = 0x02, /*!< Noise error */
- HAL_UART_ERROR_FE = 0x04, /*!< frame error */
- HAL_UART_ERROR_ORE = 0x08, /*!< Overrun error */
- HAL_UART_ERROR_DMA = 0x10 /*!< DMA transfer error */
-}HAL_UART_ErrorTypeDef;
-
/**
* @brief UART clock sources definition
*/
@@ -202,35 +173,36 @@
*/
typedef struct
{
- USART_TypeDef *Instance; /* UART registers base address */
+ USART_TypeDef *Instance; /*!< UART registers base address */
- UART_InitTypeDef Init; /* UART communication parameters */
+ UART_InitTypeDef Init; /*!< UART communication parameters */
- UART_AdvFeatureInitTypeDef AdvancedInit; /* UART Advanced Features initialization parameters */
+ UART_AdvFeatureInitTypeDef AdvancedInit; /*!< UART Advanced Features initialization parameters */
- uint8_t *pTxBuffPtr; /* Pointer to UART Tx transfer Buffer */
+ uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */
- uint16_t TxXferSize; /* UART Tx Transfer size */
+ uint16_t TxXferSize; /*!< UART Tx Transfer size */
- uint16_t TxXferCount; /* UART Tx Transfer Counter */
+ uint16_t TxXferCount; /*!< UART Tx Transfer Counter */
- uint8_t *pRxBuffPtr; /* Pointer to UART Rx transfer Buffer */
+ uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */
- uint16_t RxXferSize; /* UART Rx Transfer size */
+ uint16_t RxXferSize; /*!< UART Rx Transfer size */
- uint16_t RxXferCount; /* UART Rx Transfer Counter */
+ uint16_t RxXferCount; /*!< UART Rx Transfer Counter */
- uint16_t Mask; /* UART Rx RDR register mask */
+ uint16_t Mask; /*!< UART Rx RDR register mask */
- DMA_HandleTypeDef *hdmatx; /* UART Tx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */
- DMA_HandleTypeDef *hdmarx; /* UART Rx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */
- HAL_LockTypeDef Lock; /* Locking object */
+ HAL_LockTypeDef Lock; /*!< Locking object */
- HAL_UART_StateTypeDef State; /* UART communication state */
+ HAL_UART_StateTypeDef State; /*!< UART communication state */
- HAL_UART_ErrorTypeDef ErrorCode; /* UART Error code */
+ __IO uint32_t ErrorCode; /*!< UART Error code
+ This parameter can be a value of @ref UART_Error */
}UART_HandleTypeDef;
@@ -243,13 +215,28 @@
* @{
*/
+/** @defgroup UART_Error UART Error
+ * @{
+ */
+#define HAL_UART_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_UART_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */
+#define HAL_UART_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */
+#define HAL_UART_ERROR_FE ((uint32_t)0x00000004) /*!< frame error */
+#define HAL_UART_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */
+#define HAL_UART_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
/** @defgroup UART_Stop_Bits UART Number of Stop Bits
* @{
*/
#define UART_STOPBITS_1 ((uint32_t)0x0000)
#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+#define UART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
- ((STOPBITS) == UART_STOPBITS_2))
+ ((STOPBITS) == UART_STOPBITS_2) || \
+ ((STOPBITS) == UART_STOPBITS_1_5))
/**
* @}
*/
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_uart_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_uart_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_uart_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of UART HAL Extension module.
******************************************************************************
* @attention
@@ -55,6 +55,31 @@
*/
/* Exported types ------------------------------------------------------------*/
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+/** @defgroup UARTEx_Exported_Types UARTEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief UART wake up from stop mode parameters
+ */
+typedef struct
+{
+ uint32_t WakeUpEvent; /*!< Specifies which event will activat the Wakeup from Stop mode flag (WUF).
+ This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection.
+ If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must
+ be filled up. */
+
+ uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long.
+ This parameter can be a value of @ref UART_WakeUp_Address_Length */
+
+ uint8_t Address; /*!< UART/USART node address (7-bit long max) */
+} UART_WakeUpTypeDef;
+/**
+ * @}
+ */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+
/* Exported constants --------------------------------------------------------*/
/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants
* @{
@@ -63,9 +88,9 @@
/** @defgroup UARTEx_Word_Length UARTEx Word Length
* @{
*/
-#if defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx)
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define UART_WORDLENGTH_7B ((uint32_t)USART_CR1_M1)
#define UART_WORDLENGTH_8B ((uint32_t)0x00000000)
#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
@@ -77,9 +102,9 @@
#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \
((LENGTH) == UART_WORDLENGTH_9B))
-#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx) */
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
* @}
*/
@@ -87,9 +112,9 @@
/** @defgroup UARTEx_AutoBaud_Rate_Mode UARTEx Advanced Feature AutoBaud Rate Mode
* @{
*/
-#if defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx)
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x0000)
#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0)
#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME ((uint32_t)USART_CR2_ABRMODE_1)
@@ -103,15 +128,15 @@
#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0)
#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(MODE) (((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \
((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE))
-#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx) */
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
* @}
*/
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/** @defgroup UARTEx_LIN UARTEx Local Interconnection Network mode
* @{
*/
@@ -133,7 +158,7 @@
/**
* @}
*/
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
/** @defgroup UART_Flags UARTEx Status Flags
* Elements values convention: 0xXXXX
@@ -142,24 +167,24 @@
*/
#define UART_FLAG_REACK ((uint32_t)0x00400000)
#define UART_FLAG_TEACK ((uint32_t)0x00200000)
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_FLAG_WUF ((uint32_t)0x00100000)
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#define UART_FLAG_RWU ((uint32_t)0x00080000)
#define UART_FLAG_SBKF ((uint32_t)0x00040000
#define UART_FLAG_CMF ((uint32_t)0x00020000)
#define UART_FLAG_BUSY ((uint32_t)0x00010000)
#define UART_FLAG_ABRF ((uint32_t)0x00008000)
#define UART_FLAG_ABRE ((uint32_t)0x00004000)
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8)
#define UART_FLAG_EOBF ((uint32_t)0x00001000)
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
#define UART_FLAG_RTOF ((uint32_t)0x00000800)
#define UART_FLAG_CTS ((uint32_t)0x00000400)
#define UART_FLAG_CTSIF ((uint32_t)0x00000200)
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_FLAG_LBDF ((uint32_t)0x00000100)
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#define UART_FLAG_TXE ((uint32_t)0x00000080)
#define UART_FLAG_TC ((uint32_t)0x00000040)
#define UART_FLAG_RXNE ((uint32_t)0x00000020)
@@ -173,13 +198,13 @@
*/
/** @defgroup UART_Interrupt_definition UARTEx Interrupts Definition
- * Elements values convention: 0000ZZZZ0XXYYYYYb
+ * Elements values convention: 0000ZZZZZ0XXYYYYYb
* - YYYYY : Interrupt source position in the XX register (5bits)
* - XX : Interrupt source register (2bits)
* - 01: CR1 register
* - 10: CR2 register
* - 11: CR3 register
- * - ZZZZ : Flag position in the ISR register(4bits)
+ * - ZZZZZ : Flag position in the ISR register(5bits)
* @{
*/
#define UART_IT_PE ((uint16_t)0x0028)
@@ -187,14 +212,14 @@
#define UART_IT_TC ((uint16_t)0x0626)
#define UART_IT_RXNE ((uint16_t)0x0525)
#define UART_IT_IDLE ((uint16_t)0x0424)
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_IT_LBD ((uint16_t)0x0846)
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#define UART_IT_CTS ((uint16_t)0x096A)
-#define UART_IT_CM ((uint16_t)0x142E)
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#define UART_IT_CM ((uint16_t)0x112E)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_IT_WUF ((uint16_t)0x1476)
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
/**
* @}
*/
@@ -209,16 +234,16 @@
#define UART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */
#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag (not available on F030xx devices)*/
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */
#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */
#define UART_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */
#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
/**
* @}
*/
@@ -247,7 +272,7 @@
* @}
*/
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/** @defgroup UART_Stop_Mode_Enable UARTEx Advanced Feature Stop Mode Enable
* @{
*/
@@ -271,7 +296,7 @@
/**
* @}
*/
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
/**
* @}
@@ -312,7 +337,7 @@
break; \
} \
} while(0)
-#elif defined (STM32F030x8) || \
+#elif defined (STM32F030x8) || defined (STM32F070x6) || \
defined (STM32F042x6) || defined (STM32F048xx) || \
defined (STM32F051x8) || defined (STM32F058xx)
#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
@@ -347,6 +372,47 @@
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
} \
} while(0)
+#elif defined(STM32F070xB)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
@@ -496,6 +562,55 @@
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
} \
} while(0)
+#elif defined(STM32F030xC)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
#endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */
@@ -509,9 +624,9 @@
* @param __HANDLE__: specifies the UART Handle
* @retval none
*/
-#if defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx)
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define __HAL_UART_MASK_COMPUTATION(__HANDLE__) \
do { \
if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \
@@ -574,9 +689,9 @@
} \
} \
} while(0)
-#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx) */
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
* @}
*/
@@ -591,23 +706,25 @@
* @{
*/
/* Initialization and de-initialization functions ****************************/
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t UART_DEPolarity, uint32_t UART_DEAssertionTime, uint32_t UART_DEDeassertionTime);
HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
-HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
-HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart);
-HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart);
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
/**
* @}
*/
/** @addtogroup UARTEx_Exported_Functions_Group2
- * @brief Extended I/O operation functions
+ * @brief Extended UART Interrupt handling function
* @{
*/
-/* I/O operation functions ***************************************************/
+/* IO operation functions ***************************************************/
void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
void HAL_UART_WakeupCallback(UART_HandleTypeDef *huart);
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
/**
* @}
*/
@@ -618,9 +735,13 @@
*/
/* Peripheral Control functions **********************************************/
-void UART_AdvFeatureConfig(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength);
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6) && !defined(STM32F030xC)
+HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
+HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
/**
* @}
*/
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_usart.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_usart.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_usart.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of USART HAL module.
******************************************************************************
* @attention
@@ -112,19 +112,6 @@
}HAL_USART_StateTypeDef;
/**
- * @brief HAL USART Error Code structure definition
- */
-typedef enum
-{
- HAL_USART_ERROR_NONE = 0x00, /*!< No error */
- HAL_USART_ERROR_PE = 0x01, /*!< Parity error */
- HAL_USART_ERROR_NE = 0x02, /*!< Noise error */
- HAL_USART_ERROR_FE = 0x04, /*!< frame error */
- HAL_USART_ERROR_ORE = 0x08, /*!< Overrun error */
- HAL_USART_ERROR_DMA = 0x10 /*!< DMA transfer error */
-}HAL_USART_ErrorTypeDef;
-
-/**
* @brief USART clock sources definitions
*/
typedef enum
@@ -163,11 +150,12 @@
DMA_HandleTypeDef *hdmarx; /*!< USART Rx DMA Handle parameters */
- HAL_LockTypeDef Lock; /*!< Locking object */
+ HAL_LockTypeDef Lock; /*!< Locking object */
- HAL_USART_StateTypeDef State; /*!< USART communication state */
+ HAL_USART_StateTypeDef State; /*!< USART communication state */
- HAL_USART_ErrorTypeDef ErrorCode; /*!< USART Error code */
+ __IO uint32_t ErrorCode; /*!< USART Error code
+ This parameter can be a value of @ref USART_Error */
}USART_HandleTypeDef;
@@ -180,15 +168,26 @@
* @{
*/
+/** @defgroup USART_Error USART Error
+ * @{
+ */
+#define HAL_USART_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_USART_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */
+#define HAL_USART_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */
+#define HAL_USART_ERROR_FE ((uint32_t)0x00000004) /*!< frame error */
+#define HAL_USART_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */
+#define HAL_USART_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
/** @defgroup USART_Stop_Bits USART Number of Stop Bits
* @{
*/
#define USART_STOPBITS_1 ((uint32_t)0x0000)
-#define USART_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0)
#define USART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
#define USART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_STOPBITS_1) || \
- ((STOPBITS) == USART_STOPBITS_0_5) || \
((STOPBITS) == USART_STOPBITS_1_5) || \
((STOPBITS) == USART_STOPBITS_2))
/**
@@ -525,7 +524,6 @@
HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart);
void HAL_USART_MspInit(USART_HandleTypeDef *husart);
void HAL_USART_MspDeInit(USART_HandleTypeDef *husart);
-void HAL_USART_SetConfig(USART_HandleTypeDef *husart);
HAL_StatusTypeDef HAL_USART_CheckIdleState(USART_HandleTypeDef *husart);
/**
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_usart_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_usart_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_usart_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of USART HAL Extension module.
******************************************************************************
* @attention
@@ -63,9 +63,9 @@
/** @defgroup USARTEx_Word_Length USARTEx Word Length
* @{
*/
-#if defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx)
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define USART_WORDLENGTH_7B ((uint32_t)USART_CR1_M1)
#define USART_WORDLENGTH_8B ((uint32_t)0x00000000)
#define USART_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
@@ -77,9 +77,9 @@
#define USART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WORDLENGTH_8B) || \
((LENGTH) == USART_WORDLENGTH_9B))
-#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || defined (STM32F070xB) || \
defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx) */
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
* @}
*/
@@ -121,7 +121,7 @@
break; \
} \
} while(0)
-#elif defined (STM32F030x8) || \
+#elif defined (STM32F030x8) || defined (STM32F070x6) || \
defined (STM32F042x6) || defined (STM32F048xx) || \
defined (STM32F051x8) || defined (STM32F058xx)
#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
@@ -156,6 +156,47 @@
(__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
} \
} while(0)
+#elif defined (STM32F070xB)
+#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
@@ -304,7 +345,56 @@
{ \
(__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
} \
- } while(0)
+ } while(0)
+#elif defined(STM32F030xC)
+#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
#endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */
@@ -317,9 +407,9 @@
* @param __HANDLE__: specifies the USART Handle
* @retval none
*/
-#if defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx)
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define __HAL_USART_MASK_COMPUTATION(__HANDLE__) \
do { \
if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_9B) \
@@ -382,9 +472,9 @@
} \
} \
} while(0)
-#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx) */
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
* @}
*/
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_wwdg.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_wwdg.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_wwdg.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of WWDG HAL module.
******************************************************************************
* @attention
@@ -81,10 +81,10 @@
This parameter can be a value of @ref WWDG_Prescaler */
uint32_t Window; /*!< Specifies the WWDG window value to be compared to the downcounter.
- This parameter must be a number lower than Max_Data = 0x80 */
+ This parameter must be a number lower than Max_Data = 0x80 */
uint32_t Counter; /*!< Specifies the WWDG free-running downcounter value.
- This parameter must be a number between Min_Data = 0x40 and Max_Data = 0x7F */
+ This parameter must be a number between Min_Data = 0x40 and Max_Data = 0x7F */
} WWDG_InitTypeDef;
@@ -113,24 +113,10 @@
* @{
*/
-/** @defgroup WWDG_BitAddress_AliasRegion WWDG BitAddress AliasRegion
- * @brief WWDG registers bit address in the alias region
- * @{
- */
-
-/* --- CFR Register ---*/
-/* Alias word address of EWI bit */
-#define CFR_BASE (uint32_t)(WWDG_BASE + 0x04)
-
-/**
- * @}
- */
-
/** @defgroup WWDG_Interrupt_definition WWDG Interrupt definition
* @{
*/
-#define WWDG_IT_EWI ((uint32_t)WWDG_CFR_EWI)
-
+#define WWDG_IT_EWI WWDG_CFR_EWI /*!< Early wakeup interrupt */
/**
* @}
*/
@@ -139,8 +125,7 @@
* @brief WWDG Flag definition
* @{
*/
-#define WWDG_FLAG_EWIF ((uint32_t)WWDG_SR_EWIF) /*!< Early wakeup interrupt flag */
-
+#define WWDG_FLAG_EWIF WWDG_SR_EWIF /*!< Early wakeup interrupt flag */
/**
* @}
*/
@@ -148,16 +133,15 @@
/** @defgroup WWDG_Prescaler WWDG Prescaler
* @{
*/
-#define WWDG_PRESCALER_1 ((uint32_t)0x00000000) /*!< WWDG counter clock = (PCLK1/4096)/1 */
-#define WWDG_PRESCALER_2 ((uint32_t)WWDG_CFR_WDGTB0) /*!< WWDG counter clock = (PCLK1/4096)/2 */
-#define WWDG_PRESCALER_4 ((uint32_t)WWDG_CFR_WDGTB1) /*!< WWDG counter clock = (PCLK1/4096)/4 */
-#define WWDG_PRESCALER_8 ((uint32_t)WWDG_CFR_WDGTB) /*!< WWDG counter clock = (PCLK1/4096)/8 */
+#define WWDG_PRESCALER_1 ((uint32_t)0x00000000) /*!< WWDG counter clock = (PCLK1/4096)/1 */
+#define WWDG_PRESCALER_2 WWDG_CFR_WDGTB0 /*!< WWDG counter clock = (PCLK1/4096)/2 */
+#define WWDG_PRESCALER_4 WWDG_CFR_WDGTB1 /*!< WWDG counter clock = (PCLK1/4096)/4 */
+#define WWDG_PRESCALER_8 WWDG_CFR_WDGTB /*!< WWDG counter clock = (PCLK1/4096)/8 */
-#define IS_WWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == WWDG_PRESCALER_1) || \
- ((__PRESCALER__) == WWDG_PRESCALER_2) || \
- ((__PRESCALER__) == WWDG_PRESCALER_4) || \
- ((__PRESCALER__) == WWDG_PRESCALER_8))
-
+#define IS_WWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == WWDG_PRESCALER_1) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_2) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_4) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_8))
/**
* @}
*/
@@ -165,8 +149,7 @@
/** @defgroup WWDG_Window WWDG Window
* @{
*/
-#define IS_WWDG_WINDOW(__WINDOW__) ((__WINDOW__) <= 0x7F)
-
+#define IS_WWDG_WINDOW(__WINDOW__) ((__WINDOW__) <= 0x7F)
/**
* @}
*/
@@ -174,8 +157,7 @@
/** @defgroup WWDG_Counter WWDG Counter
* @{
*/
-#define IS_WWDG_COUNTER(__COUNTER__) (((__COUNTER__) >= 0x40) && ((__COUNTER__) <= 0x7F))
-
+#define IS_WWDG_COUNTER(__COUNTER__) (((__COUNTER__) >= 0x40) && ((__COUNTER__) <= 0x7F))
/**
* @}
*/
@@ -194,14 +176,65 @@
* @param __HANDLE__: WWDG handle
* @retval None
*/
-#define __HAL_WWDG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_WWDG_STATE_RESET)
+#define __HAL_WWDG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_WWDG_STATE_RESET)
/**
* @brief Enables the WWDG peripheral.
* @param __HANDLE__: WWDG handle
* @retval None
*/
-#define __HAL_WWDG_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, WWDG_CR_WDGA)
+#define __HAL_WWDG_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= WWDG_CR_WDGA)
+
+/**
+ * @brief Disables the WWDG peripheral.
+ * @param __HANDLE__: WWDG handle
+ * @note WARNING: This is a dummy macro for HAL code alignment.
+ * Once enable, WWDG Peripheral cannot be disabled except by a system reset.
+ * @retval None
+ */
+#define __HAL_WWDG_DISABLE(__HANDLE__) /* dummy macro */
+
+/**
+ * @brief Enables the WWDG early wakeup interrupt.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the interrupt to enable.
+ * This parameter can be one of the following values:
+ * @arg WWDG_IT_EWI: Early wakeup interrupt
+ * @note Once enabled this interrupt cannot be disabled except by a system reset.
+ * @retval None
+ */
+#define __HAL_WWDG_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CFR |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the WWDG early wakeup interrupt.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the interrupt to disable.
+ * This parameter can be one of the following values:
+ * @arg WWDG_IT_EWI: Early wakeup interrupt
+ * @note WARNING: This is a dummy macro for HAL code alignment.
+ * Once enabled this interrupt cannot be disabled except by a system reset.
+ * @retval None
+ */
+#define __HAL_WWDG_DISABLE_IT(__HANDLE__, __INTERRUPT__) /* dummy macro */
+
+/**
+ * @brief Gets the selected WWDG's it status.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the it to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt IT
+ * @retval The new state of WWDG_FLAG (SET or RESET).
+ */
+#define __HAL_WWDG_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/** @brief Clear the WWDG's interrupt pending bits
+ * bits to clear the selected interrupt pending bits.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ */
+#define __HAL_WWDG_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
/**
* @brief Gets the selected WWDG's flag status.
@@ -211,7 +244,7 @@
* @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
* @retval The new state of WWDG_FLAG (SET or RESET).
*/
-#define __HAL_WWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+#define __HAL_WWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
/**
* @brief Clears the WWDG's pending flags.
@@ -221,26 +254,16 @@
* @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
* @retval None
*/
-#define __HAL_WWDG_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__))
+#define __HAL_WWDG_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
-/**
- * @brief Enables the WWDG early wakeup interrupt.
- * @param __INTERRUPT__: specifies the interrupt to enable.
- * This parameter can be one of the following values:
- * @arg WWDG_IT_EWI: Early wakeup interrupt
- * @note Once enabled this interrupt cannot be disabled except by a system reset.
- * @retval None
+/** @brief Checks if the specified WWDG interrupt source is enabled or disabled.
+ * @param __HANDLE__: WWDG Handle.
+ * @param __INTERRUPT__: specifies the WWDG interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_IT_EWI: Early Wakeup Interrupt
+ * @retval state of __INTERRUPT__ (TRUE or FALSE).
*/
-#define __HAL_WWDG_ENABLE_IT(__INTERRUPT__) (*(__IO uint32_t *) CFR_BASE |= (__INTERRUPT__))
-
-/** @brief Clear the WWDG's interrupt pending bits
- * bits to clear the selected interrupt pending bits.
- * @param __HANDLE__: WWDG handle
- * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
- * This parameter can be one of the following values:
- * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
- */
-#define __HAL_WWDG_CLEAR_IT(__HANDLE__, __INTERRUPT__) __HAL_WWDG_CLEAR_FLAG((__HANDLE__), (__INTERRUPT__))
+#define __HAL_WWDG_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CFR & (__INTERRUPT__)) == (__INTERRUPT__))
/**
* @}
--- a/TARGET_NUCLEO_F072RB/system_stm32f0xx.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F072RB/system_stm32f0xx.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file system_stm32f0xx.h * @author MCD Application Team - * @version V2.1.0 - * @date 03-Oct-2014 + * @version V2.2.0 + * @date 05-December-2014 * @brief CMSIS Cortex-M0 Device System Source File for STM32F0xx devices. ****************************************************************************** * @attention
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_F091RC/TARGET_STM/TARGET_NUCLEO_F091RC/PeripheralPins.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,66 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_PERIPHERALPINS_H +#define MBED_PERIPHERALPINS_H + +#include "pinmap.h" +#include "PeripheralNames.h" + +//*** ADC *** + +extern const PinMap PinMap_ADC[]; + +//*** DAC *** + +extern const PinMap PinMap_DAC[]; + +//*** I2C *** + +extern const PinMap PinMap_I2C_SDA[]; +extern const PinMap PinMap_I2C_SCL[]; + +//*** PWM *** + +extern const PinMap PinMap_PWM[]; + +//*** SERIAL *** + +extern const PinMap PinMap_UART_TX[]; +extern const PinMap PinMap_UART_RX[]; + +//*** SPI *** + +extern const PinMap PinMap_SPI_MOSI[]; +extern const PinMap PinMap_SPI_MISO[]; +extern const PinMap PinMap_SPI_SCLK[]; +extern const PinMap PinMap_SPI_SSEL[]; + +#endif
--- a/TARGET_NUCLEO_F091RC/TARGET_STM/TARGET_NUCLEO_F091RC/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/TARGET_STM/TARGET_NUCLEO_F091RC/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -64,6 +64,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/startup_stm32f091rc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_MICRO/system_stm32f0xx.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/startup_stm32f091rc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_ARM_STD/system_stm32f0xx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/STM32F091XC.ld Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,153 @@
+/* Linker script to configure memory regions. */
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 256k
+ RAM (xrw) : ORIGIN = 0x200000C0, LENGTH = 32k - 0x0C0
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ * _estack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.isr_vector))
+ *(.text*)
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+ _sidata = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ _sdata = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ KEEP(*(.jcr*))
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+ _edata = .;
+
+ } > RAM
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start__ = .;
+ _sbss = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ _ebss = .;
+ } > RAM
+
+ .heap (COPY):
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy (COPY):
+ {
+ *(.stack*)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ _estack = __StackTop;
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/hal_tick.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/startup_stm32f091xc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_GCC_ARM/system_stm32f0xx.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/startup_stm32f091xc.o has changed
--- a/TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f091xc.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f091xc.icf Tue Feb 03 15:31:20 2015 +0000
@@ -15,8 +15,8 @@
define region RAM_region = mem:[from __region_RAM_start__ to __region_RAM_end__];
/* Stack and Heap */
-define symbol __size_cstack__ = 0x400;
-define symbol __size_heap__ = 0x400;
+define symbol __size_cstack__ = 0x1000;
+define symbol __size_heap__ = 0x2000;
define block CSTACK with alignment = 8, size = __size_cstack__ { };
define block HEAP with alignment = 8, size = __size_heap__ { };
define block STACKHEAP with fixed order { block HEAP, block CSTACK };
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/stm32f0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F091RC/TOOLCHAIN_IAR/system_stm32f0xx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F091RC/hal_tick.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,60 @@
+/**
+ ******************************************************************************
+ * @file hal_tick.h
+ * @author MCD Application Team
+ * @brief Initialization of HAL tick
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#ifndef __HAL_TICK_H
+#define __HAL_TICK_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "stm32f0xx.h"
+#include "cmsis_nvic.h"
+
+#define TIM_MST TIM2
+#define TIM_MST_IRQ TIM2_IRQn
+#define TIM_MST_RCC __TIM2_CLK_ENABLE()
+
+#define TIM_MST_RESET_ON __TIM2_FORCE_RESET()
+#define TIM_MST_RESET_OFF __TIM2_RELEASE_RESET()
+
+#define HAL_TICK_DELAY (1000) // 1 ms
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __HAL_TICK_H
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- a/TARGET_NUCLEO_F091RC/stm32f091xc.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f091xc.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f091xc.h
* @author MCD Application Team
- * @version V2.1.0
- * @date 03-Oct-2014
+ * @version V2.2.0
+ * @date 05-December-2014
* @brief CMSIS STM32F091xC devices Peripheral Access Layer Header File.
*
* This file contains:
@@ -325,8 +325,8 @@
{
__IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
__IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
- uint32_t RESERVED0[40];/*!< Reserved as declared by channel typedef 0x08 - 0xA4*/
- __IO uint32_t RMPCR; /*!< Remap control register, Address offset: 0xA8 */
+ uint32_t RESERVED0[40];/*!< Reserved as declared by channel typedef 0x08 - 0xA4 */
+ __IO uint32_t CSELR; /*!< Channel selection register, Address offset: 0xA8 */
}DMA_TypeDef;
/**
@@ -510,24 +510,15 @@
typedef struct
{
- __IO uint16_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */
- uint16_t RESERVED0; /*!< Reserved, 0x02 */
- __IO uint16_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
- uint16_t RESERVED1; /*!< Reserved, 0x06 */
- __IO uint16_t SR; /*!< SPI Status register, Address offset: 0x08 */
- uint16_t RESERVED2; /*!< Reserved, 0x0A */
- __IO uint16_t DR; /*!< SPI data register, Address offset: 0x0C */
- uint16_t RESERVED3; /*!< Reserved, 0x0E */
- __IO uint16_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
- uint16_t RESERVED4; /*!< Reserved, 0x12 */
- __IO uint16_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */
- uint16_t RESERVED5; /*!< Reserved, 0x16 */
- __IO uint16_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */
- uint16_t RESERVED6; /*!< Reserved, 0x1A */
- __IO uint16_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
- uint16_t RESERVED7; /*!< Reserved, 0x1E */
- __IO uint16_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
- uint16_t RESERVED8; /*!< Reserved, 0x22 */
+ __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
}SPI_TypeDef;
/**
@@ -2600,160 +2591,160 @@
/****************** Bit definition for DMA_CMAR register ********************/
#define DMA_CMAR_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
-/****************** Bit definition for DMA_RMPCR1 register ********************/
-#define DMA_RMPCR1_DEFAULT ((uint32_t)0x00000000) /*!< Default remap position for DMA1 */
-#define DMA_RMPCR1_CH1_ADC ((uint32_t)0x00000001) /*!< Remap ADC on DMA1 Channel 1*/
-#define DMA_RMPCR1_CH1_TIM17_CH1 ((uint32_t)0x00000007) /*!< Remap TIM17 channel 1 on DMA1 channel 1 */
-#define DMA_RMPCR1_CH1_TIM17_UP ((uint32_t)0x00000007) /*!< Remap TIM17 up on DMA1 channel 1 */
-#define DMA_RMPCR1_CH1_USART1_RX ((uint32_t)0x00000008) /*!< Remap USART1 Rx on DMA1 channel 1 */
-#define DMA_RMPCR1_CH1_USART2_RX ((uint32_t)0x00000009) /*!< Remap USART2 Rx on DMA1 channel 1 */
-#define DMA_RMPCR1_CH1_USART3_RX ((uint32_t)0x0000000A) /*!< Remap USART3 Rx on DMA1 channel 1 */
-#define DMA_RMPCR1_CH1_USART4_RX ((uint32_t)0x0000000B) /*!< Remap USART4 Rx on DMA1 channel 1 */
-#define DMA_RMPCR1_CH1_USART5_RX ((uint32_t)0x0000000C) /*!< Remap USART5 Rx on DMA1 channel 1 */
-#define DMA_RMPCR1_CH1_USART6_RX ((uint32_t)0x0000000D) /*!< Remap USART6 Rx on DMA1 channel 1 */
-#define DMA_RMPCR1_CH1_USART7_RX ((uint32_t)0x0000000E) /*!< Remap USART7 Rx on DMA1 channel 1 */
-#define DMA_RMPCR1_CH1_USART8_RX ((uint32_t)0x0000000F) /*!< Remap USART8 Rx on DMA1 channel 1 */
-#define DMA_RMPCR1_CH2_ADC ((uint32_t)0x00000010) /*!< Remap ADC on DMA1 channel 2 */
-#define DMA_RMPCR1_CH2_I2C1_TX ((uint32_t)0x00000020) /*!< Remap I2C1 Tx on DMA1 channel 2 */
-#define DMA_RMPCR1_CH2_SPI1_RX ((uint32_t)0x00000030) /*!< Remap SPI1 Rx on DMA1 channel 2 */
-#define DMA_RMPCR1_CH2_TIM1_CH1 ((uint32_t)0x00000040) /*!< Remap TIM1 channel 1 on DMA1 channel 2 */
-#define DMA_RMPCR1_CH2_TIM17_CH1 ((uint32_t)0x00000070) /*!< Remap TIM17 channel 1 on DMA1 channel 2 */
-#define DMA_RMPCR1_CH2_TIM17_UP ((uint32_t)0x00000070) /*!< Remap TIM17 up on DMA1 channel 2 */
-#define DMA_RMPCR1_CH2_USART1_TX ((uint32_t)0x00000080) /*!< Remap USART1 Tx on DMA1 channel 2 */
-#define DMA_RMPCR1_CH2_USART2_TX ((uint32_t)0x00000090) /*!< Remap USART2 Tx on DMA1 channel 2 */
-#define DMA_RMPCR1_CH2_USART3_TX ((uint32_t)0x000000A0) /*!< Remap USART3 Tx on DMA1 channel 2 */
-#define DMA_RMPCR1_CH2_USART4_TX ((uint32_t)0x000000B0) /*!< Remap USART4 Tx on DMA1 channel 2 */
-#define DMA_RMPCR1_CH2_USART5_TX ((uint32_t)0x000000C0) /*!< Remap USART5 Tx on DMA1 channel 2 */
-#define DMA_RMPCR1_CH2_USART6_TX ((uint32_t)0x000000D0) /*!< Remap USART6 Tx on DMA1 channel 2 */
-#define DMA_RMPCR1_CH2_USART7_TX ((uint32_t)0x000000E0) /*!< Remap USART7 Tx on DMA1 channel 2 */
-#define DMA_RMPCR1_CH2_USART8_TX ((uint32_t)0x000000F0) /*!< Remap USART8 Tx on DMA1 channel 2 */
-#define DMA_RMPCR1_CH3_TIM6_UP ((uint32_t)0x00000100) /*!< Remap TIM6 up on DMA1 channel 3 */
-#define DMA_RMPCR1_CH3_DAC_CH1 ((uint32_t)0x00000100) /*!< Remap DAC Channel 1on DMA1 channel 3 */
-#define DMA_RMPCR1_CH3_I2C1_RX ((uint32_t)0x00000200) /*!< Remap I2C1 Rx on DMA1 channel 3 */
-#define DMA_RMPCR1_CH3_SPI1_TX ((uint32_t)0x00000300) /*!< Remap SPI1 Tx on DMA1 channel 3 */
-#define DMA_RMPCR1_CH3_TIM1_CH2 ((uint32_t)0x00000400) /*!< Remap TIM1 channel 2 on DMA1 channel 3 */
-#define DMA_RMPCR1_CH3_TIM2_CH2 ((uint32_t)0x00000500) /*!< Remap TIM2 channel 2 on DMA1 channel 3 */
-#define DMA_RMPCR1_CH3_TIM16_CH1 ((uint32_t)0x00000700) /*!< Remap TIM16 channel 1 on DMA1 channel 3 */
-#define DMA_RMPCR1_CH3_TIM16_UP ((uint32_t)0x00000700) /*!< Remap TIM16 up on DMA1 channel 3 */
-#define DMA_RMPCR1_CH3_USART1_RX ((uint32_t)0x00000800) /*!< Remap USART1 Rx on DMA1 channel 3 */
-#define DMA_RMPCR1_CH3_USART2_RX ((uint32_t)0x00000900) /*!< Remap USART2 Rx on DMA1 channel 3 */
-#define DMA_RMPCR1_CH3_USART3_RX ((uint32_t)0x00000A00) /*!< Remap USART3 Rx on DMA1 channel 3 */
-#define DMA_RMPCR1_CH3_USART4_RX ((uint32_t)0x00000B00) /*!< Remap USART4 Rx on DMA1 channel 3 */
-#define DMA_RMPCR1_CH3_USART5_RX ((uint32_t)0x00000C00) /*!< Remap USART5 Rx on DMA1 channel 3 */
-#define DMA_RMPCR1_CH3_USART6_RX ((uint32_t)0x00000D00) /*!< Remap USART6 Rx on DMA1 channel 3 */
-#define DMA_RMPCR1_CH3_USART7_RX ((uint32_t)0x00000E00) /*!< Remap USART7 Rx on DMA1 channel 3 */
-#define DMA_RMPCR1_CH3_USART8_RX ((uint32_t)0x00000F00) /*!< Remap USART8 Rx on DMA1 channel 3 */
-#define DMA_RMPCR1_CH4_TIM7_UP ((uint32_t)0x00001000) /*!< Remap TIM7 up on DMA1 channel 4 */
-#define DMA_RMPCR1_CH4_DAC_CH2 ((uint32_t)0x00001000) /*!< Remap DAC Channel 2 on DMA1 channel 4 */
-#define DMA_RMPCR1_CH4_I2C2_TX ((uint32_t)0x00002000) /*!< Remap I2C2 Tx on DMA1 channel 4 */
-#define DMA_RMPCR1_CH4_SPI2_RX ((uint32_t)0x00003000) /*!< Remap SPI2 Rx on DMA1 channel 4 */
-#define DMA_RMPCR1_CH4_TIM2_CH4 ((uint32_t)0x00005000) /*!< Remap TIM2 channel 4 on DMA1 channel 4 */
-#define DMA_RMPCR1_CH4_TIM3_CH1 ((uint32_t)0x00006000) /*!< Remap TIM3 channel 1 on DMA1 channel 4 */
-#define DMA_RMPCR1_CH4_TIM3_TRIG ((uint32_t)0x00006000) /*!< Remap TIM3 Trig on DMA1 channel 4 */
-#define DMA_RMPCR1_CH4_TIM16_CH1 ((uint32_t)0x00007000) /*!< Remap TIM16 channel 1 on DMA1 channel 4 */
-#define DMA_RMPCR1_CH4_TIM16_UP ((uint32_t)0x00007000) /*!< Remap TIM16 up on DMA1 channel 4 */
-#define DMA_RMPCR1_CH4_USART1_TX ((uint32_t)0x00008000) /*!< Remap USART1 Tx on DMA1 channel 4 */
-#define DMA_RMPCR1_CH4_USART2_TX ((uint32_t)0x00009000) /*!< Remap USART2 Tx on DMA1 channel 4 */
-#define DMA_RMPCR1_CH4_USART3_TX ((uint32_t)0x0000A000) /*!< Remap USART3 Tx on DMA1 channel 4 */
-#define DMA_RMPCR1_CH4_USART4_TX ((uint32_t)0x0000B000) /*!< Remap USART4 Tx on DMA1 channel 4 */
-#define DMA_RMPCR1_CH4_USART5_TX ((uint32_t)0x0000C000) /*!< Remap USART5 Tx on DMA1 channel 4 */
-#define DMA_RMPCR1_CH4_USART6_TX ((uint32_t)0x0000D000) /*!< Remap USART6 Tx on DMA1 channel 4 */
-#define DMA_RMPCR1_CH4_USART7_TX ((uint32_t)0x0000E000) /*!< Remap USART7 Tx on DMA1 channel 4 */
-#define DMA_RMPCR1_CH4_USART8_TX ((uint32_t)0x0000F000) /*!< Remap USART8 Tx on DMA1 channel 4 */
-#define DMA_RMPCR1_CH5_I2C2_RX ((uint32_t)0x00020000) /*!< Remap I2C2 Rx on DMA1 channel 5 */
-#define DMA_RMPCR1_CH5_SPI2_TX ((uint32_t)0x00030000) /*!< Remap SPI1 Tx on DMA1 channel 5 */
-#define DMA_RMPCR1_CH5_TIM1_CH3 ((uint32_t)0x00040000) /*!< Remap TIM1 channel 3 on DMA1 channel 5 */
-#define DMA_RMPCR1_CH5_USART1_RX ((uint32_t)0x00080000) /*!< Remap USART1 Rx on DMA1 channel 5 */
-#define DMA_RMPCR1_CH5_USART2_RX ((uint32_t)0x00090000) /*!< Remap USART2 Rx on DMA1 channel 5 */
-#define DMA_RMPCR1_CH5_USART3_RX ((uint32_t)0x000A0000) /*!< Remap USART3 Rx on DMA1 channel 5 */
-#define DMA_RMPCR1_CH5_USART4_RX ((uint32_t)0x000B0000) /*!< Remap USART4 Rx on DMA1 channel 5 */
-#define DMA_RMPCR1_CH5_USART5_RX ((uint32_t)0x000C0000) /*!< Remap USART5 Rx on DMA1 channel 5 */
-#define DMA_RMPCR1_CH5_USART6_RX ((uint32_t)0x000D0000) /*!< Remap USART6 Rx on DMA1 channel 5 */
-#define DMA_RMPCR1_CH5_USART7_RX ((uint32_t)0x000E0000) /*!< Remap USART7 Rx on DMA1 channel 5 */
-#define DMA_RMPCR1_CH5_USART8_RX ((uint32_t)0x000F0000) /*!< Remap USART8 Rx on DMA1 channel 5 */
-#define DMA_RMPCR1_CH6_I2C1_TX ((uint32_t)0x00200000) /*!< Remap I2C1 Tx on DMA1 channel 6 */
-#define DMA_RMPCR1_CH6_SPI2_RX ((uint32_t)0x00300000) /*!< Remap SPI2 Rx on DMA1 channel 6 */
-#define DMA_RMPCR1_CH6_TIM1_CH1 ((uint32_t)0x00400000) /*!< Remap TIM1 channel 1 on DMA1 channel 6 */
-#define DMA_RMPCR1_CH6_TIM1_CH2 ((uint32_t)0x00400000) /*!< Remap TIM1 channel 2 on DMA1 channel 6 */
-#define DMA_RMPCR1_CH6_TIM1_CH3 ((uint32_t)0x00400000) /*!< Remap TIM1 channel 3 on DMA1 channel 6 */
-#define DMA_RMPCR1_CH6_TIM3_CH1 ((uint32_t)0x00600000) /*!< Remap TIM3 channel 1 on DMA1 channel 6 */
-#define DMA_RMPCR1_CH6_TIM3_TRIG ((uint32_t)0x00600000) /*!< Remap TIM3 Trig on DMA1 channel 6 */
-#define DMA_RMPCR1_CH6_TIM16_CH1 ((uint32_t)0x00700000) /*!< Remap TIM16 channel 1 on DMA1 channel 6 */
-#define DMA_RMPCR1_CH6_TIM16_UP ((uint32_t)0x00700000) /*!< Remap TIM16 up on DMA1 channel 6 */
-#define DMA_RMPCR1_CH6_USART1_RX ((uint32_t)0x00800000) /*!< Remap USART1 Rx on DMA1 channel 6 */
-#define DMA_RMPCR1_CH6_USART2_RX ((uint32_t)0x00900000) /*!< Remap USART2 Rx on DMA1 channel 6 */
-#define DMA_RMPCR1_CH6_USART3_RX ((uint32_t)0x00A00000) /*!< Remap USART3 Rx on DMA1 channel 6 */
-#define DMA_RMPCR1_CH6_USART4_RX ((uint32_t)0x00B00000) /*!< Remap USART4 Rx on DMA1 channel 6 */
-#define DMA_RMPCR1_CH6_USART5_RX ((uint32_t)0x00C00000) /*!< Remap USART5 Rx on DMA1 channel 6 */
-#define DMA_RMPCR1_CH6_USART6_RX ((uint32_t)0x00D00000) /*!< Remap USART6 Rx on DMA1 channel 6 */
-#define DMA_RMPCR1_CH6_USART7_RX ((uint32_t)0x00E00000) /*!< Remap USART7 Rx on DMA1 channel 6 */
-#define DMA_RMPCR1_CH6_USART8_RX ((uint32_t)0x00F00000) /*!< Remap USART8 Rx on DMA1 channel 6 */
-#define DMA_RMPCR1_CH7_I2C1_RX ((uint32_t)0x02000000) /*!< Remap I2C1 Rx on DMA1 channel 7 */
-#define DMA_RMPCR1_CH7_SPI2_TX ((uint32_t)0x03000000) /*!< Remap SPI2 Tx on DMA1 channel 7 */
-#define DMA_RMPCR1_CH7_TIM2_CH2 ((uint32_t)0x05000000) /*!< Remap TIM2 channel 2 on DMA1 channel 7 */
-#define DMA_RMPCR1_CH7_TIM2_CH4 ((uint32_t)0x05000000) /*!< Remap TIM2 channel 4 on DMA1 channel 7 */
-#define DMA_RMPCR1_CH7_TIM17_CH1 ((uint32_t)0x07000000) /*!< Remap TIM17 channel 1 on DMA1 channel 7 */
-#define DMA_RMPCR1_CH7_TIM17_UP ((uint32_t)0x07000000) /*!< Remap TIM17 up on DMA1 channel 7 */
-#define DMA_RMPCR1_CH7_USART1_TX ((uint32_t)0x08000000) /*!< Remap USART1 Tx on DMA1 channel 7 */
-#define DMA_RMPCR1_CH7_USART2_TX ((uint32_t)0x09000000) /*!< Remap USART2 Tx on DMA1 channel 7 */
-#define DMA_RMPCR1_CH7_USART3_TX ((uint32_t)0x0A000000) /*!< Remap USART3 Tx on DMA1 channel 7 */
-#define DMA_RMPCR1_CH7_USART4_TX ((uint32_t)0x0B000000) /*!< Remap USART4 Tx on DMA1 channel 7 */
-#define DMA_RMPCR1_CH7_USART5_TX ((uint32_t)0x0C000000) /*!< Remap USART5 Tx on DMA1 channel 7 */
-#define DMA_RMPCR1_CH7_USART6_TX ((uint32_t)0x0D000000) /*!< Remap USART6 Tx on DMA1 channel 7 */
-#define DMA_RMPCR1_CH7_USART7_TX ((uint32_t)0x0E000000) /*!< Remap USART7 Tx on DMA1 channel 7 */
-#define DMA_RMPCR1_CH7_USART8_TX ((uint32_t)0x0F000000) /*!< Remap USART8 Tx on DMA1 channel 7 */
-
-/****************** Bit definition for DMA_RMPCR2 register ********************/
-#define DMA_RMPCR2_DEFAULT ((uint32_t)0x00000000) /*!< Default remap position for DMA2 */
-#define DMA_RMPCR2_CH1_I2C2_TX ((uint32_t)0x00000002) /*!< Remap I2C2 TX on DMA2 channel 1 */
-#define DMA_RMPCR2_CH1_USART1_TX ((uint32_t)0x00000008) /*!< Remap USART1 Tx on DMA2 channel 1 */
-#define DMA_RMPCR2_CH1_USART2_TX ((uint32_t)0x00000009) /*!< Remap USART2 Tx on DMA2 channel 1 */
-#define DMA_RMPCR2_CH1_USART3_TX ((uint32_t)0x0000000A) /*!< Remap USART3 Tx on DMA2 channel 1 */
-#define DMA_RMPCR2_CH1_USART4_TX ((uint32_t)0x0000000B) /*!< Remap USART4 Tx on DMA2 channel 1 */
-#define DMA_RMPCR2_CH1_USART5_TX ((uint32_t)0x0000000C) /*!< Remap USART5 Tx on DMA2 channel 1 */
-#define DMA_RMPCR2_CH1_USART6_TX ((uint32_t)0x0000000D) /*!< Remap USART6 Tx on DMA2 channel 1 */
-#define DMA_RMPCR2_CH1_USART7_TX ((uint32_t)0x0000000E) /*!< Remap USART7 Tx on DMA2 channel 1 */
-#define DMA_RMPCR2_CH1_USART8_TX ((uint32_t)0x0000000F) /*!< Remap USART8 Tx on DMA2 channel 1 */
-#define DMA_RMPCR2_CH2_I2C2_RX ((uint32_t)0x00000020) /*!< Remap I2C2 Rx on DMA2 channel 2 */
-#define DMA_RMPCR2_CH2_USART1_RX ((uint32_t)0x00000080) /*!< Remap USART1 Rx on DMA2 channel 2 */
-#define DMA_RMPCR2_CH2_USART2_RX ((uint32_t)0x00000090) /*!< Remap USART2 Rx on DMA2 channel 2 */
-#define DMA_RMPCR2_CH2_USART3_RX ((uint32_t)0x000000A0) /*!< Remap USART3 Rx on DMA2 channel 2 */
-#define DMA_RMPCR2_CH2_USART4_RX ((uint32_t)0x000000B0) /*!< Remap USART4 Rx on DMA2 channel 2 */
-#define DMA_RMPCR2_CH2_USART5_RX ((uint32_t)0x000000C0) /*!< Remap USART5 Rx on DMA2 channel 2 */
-#define DMA_RMPCR2_CH2_USART6_RX ((uint32_t)0x000000D0) /*!< Remap USART6 Rx on DMA2 channel 2 */
-#define DMA_RMPCR2_CH2_USART7_RX ((uint32_t)0x000000E0) /*!< Remap USART7 Rx on DMA2 channel 2 */
-#define DMA_RMPCR2_CH2_USART8_RX ((uint32_t)0x000000F0) /*!< Remap USART8 Rx on DMA2 channel 2 */
-#define DMA_RMPCR2_CH3_TIM6_UP ((uint32_t)0x00000100) /*!< Remap TIM6 up on DMA2 channel 3 */
-#define DMA_RMPCR2_CH3_DAC_CH1 ((uint32_t)0x00000100) /*!< Remap DAC channel 1 on DMA2 channel 3 */
-#define DMA_RMPCR2_CH3_SPI1_RX ((uint32_t)0x00000300) /*!< Remap SPI1 Rx on DMA2 channel 3 */
-#define DMA_RMPCR2_CH3_USART1_RX ((uint32_t)0x00000800) /*!< Remap USART1 Rx on DMA2 channel 3 */
-#define DMA_RMPCR2_CH3_USART2_RX ((uint32_t)0x00000900) /*!< Remap USART2 Rx on DMA2 channel 3 */
-#define DMA_RMPCR2_CH3_USART3_RX ((uint32_t)0x00000A00) /*!< Remap USART3 Rx on DMA2 channel 3 */
-#define DMA_RMPCR2_CH3_USART4_RX ((uint32_t)0x00000B00) /*!< Remap USART4 Rx on DMA2 channel 3 */
-#define DMA_RMPCR2_CH3_USART5_RX ((uint32_t)0x00000C00) /*!< Remap USART5 Rx on DMA2 channel 3 */
-#define DMA_RMPCR2_CH3_USART6_RX ((uint32_t)0x00000D00) /*!< Remap USART6 Rx on DMA2 channel 3 */
-#define DMA_RMPCR2_CH3_USART7_RX ((uint32_t)0x00000E00) /*!< Remap USART7 Rx on DMA2 channel 3 */
-#define DMA_RMPCR2_CH3_USART8_RX ((uint32_t)0x00000F00) /*!< Remap USART8 Rx on DMA2 channel 3 */
-#define DMA_RMPCR2_CH4_TIM7_UP ((uint32_t)0x00001000) /*!< Remap TIM7 up on DMA2 channel 4 */
-#define DMA_RMPCR2_CH4_DAC_CH2 ((uint32_t)0x00001000) /*!< Remap DAC channel 2 on DMA2 channel 4 */
-#define DMA_RMPCR2_CH4_SPI1_TX ((uint32_t)0x00003000) /*!< Remap SPI1 Tx on DMA2 channel 4 */
-#define DMA_RMPCR2_CH4_USART1_TX ((uint32_t)0x00008000) /*!< Remap USART1 Tx on DMA2 channel 4 */
-#define DMA_RMPCR2_CH4_USART2_TX ((uint32_t)0x00009000) /*!< Remap USART2 Tx on DMA2 channel 4 */
-#define DMA_RMPCR2_CH4_USART3_TX ((uint32_t)0x0000A000) /*!< Remap USART3 Tx on DMA2 channel 4 */
-#define DMA_RMPCR2_CH4_USART4_TX ((uint32_t)0x0000B000) /*!< Remap USART4 Tx on DMA2 channel 4 */
-#define DMA_RMPCR2_CH4_USART5_TX ((uint32_t)0x0000C000) /*!< Remap USART5 Tx on DMA2 channel 4 */
-#define DMA_RMPCR2_CH4_USART6_TX ((uint32_t)0x0000D000) /*!< Remap USART6 Tx on DMA2 channel 4 */
-#define DMA_RMPCR2_CH4_USART7_TX ((uint32_t)0x0000E000) /*!< Remap USART7 Tx on DMA2 channel 4 */
-#define DMA_RMPCR2_CH4_USART8_TX ((uint32_t)0x0000F000) /*!< Remap USART8 Tx on DMA2 channel 4 */
-#define DMA_RMPCR2_CH5_ADC ((uint32_t)0x00010000) /*!< Remap ADC on DMA2 channel 5 */
-#define DMA_RMPCR2_CH5_USART1_TX ((uint32_t)0x00080000) /*!< Remap USART1 Tx on DMA2 channel 5 */
-#define DMA_RMPCR2_CH5_USART2_TX ((uint32_t)0x00090000) /*!< Remap USART2 Tx on DMA2 channel 5 */
-#define DMA_RMPCR2_CH5_USART3_TX ((uint32_t)0x000A0000) /*!< Remap USART3 Tx on DMA2 channel 5 */
-#define DMA_RMPCR2_CH5_USART4_TX ((uint32_t)0x000B0000) /*!< Remap USART4 Tx on DMA2 channel 5 */
-#define DMA_RMPCR2_CH5_USART5_TX ((uint32_t)0x000C0000) /*!< Remap USART5 Tx on DMA2 channel 5 */
-#define DMA_RMPCR2_CH5_USART6_TX ((uint32_t)0x000D0000) /*!< Remap USART6 Tx on DMA2 channel 5 */
-#define DMA_RMPCR2_CH5_USART7_TX ((uint32_t)0x000E0000) /*!< Remap USART7 Tx on DMA2 channel 5 */
-#define DMA_RMPCR2_CH5_USART8_TX ((uint32_t)0x000F0000) /*!< Remap USART8 Tx on DMA2 channel 5 */
+/****************** Bit definition for DMA1_CSELR register ********************/
+#define DMA1_CSELR_DEFAULT ((uint32_t)0x00000000) /*!< Default remap position for DMA1 */
+#define DMA1_CSELR_CH1_ADC ((uint32_t)0x00000001) /*!< Remap ADC on DMA1 Channel 1*/
+#define DMA1_CSELR_CH1_TIM17_CH1 ((uint32_t)0x00000007) /*!< Remap TIM17 channel 1 on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_TIM17_UP ((uint32_t)0x00000007) /*!< Remap TIM17 up on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART1_RX ((uint32_t)0x00000008) /*!< Remap USART1 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART2_RX ((uint32_t)0x00000009) /*!< Remap USART2 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART3_RX ((uint32_t)0x0000000A) /*!< Remap USART3 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART4_RX ((uint32_t)0x0000000B) /*!< Remap USART4 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART5_RX ((uint32_t)0x0000000C) /*!< Remap USART5 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART6_RX ((uint32_t)0x0000000D) /*!< Remap USART6 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART7_RX ((uint32_t)0x0000000E) /*!< Remap USART7 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH1_USART8_RX ((uint32_t)0x0000000F) /*!< Remap USART8 Rx on DMA1 channel 1 */
+#define DMA1_CSELR_CH2_ADC ((uint32_t)0x00000010) /*!< Remap ADC on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_I2C1_TX ((uint32_t)0x00000020) /*!< Remap I2C1 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_SPI1_RX ((uint32_t)0x00000030) /*!< Remap SPI1 Rx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_TIM1_CH1 ((uint32_t)0x00000040) /*!< Remap TIM1 channel 1 on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_TIM17_CH1 ((uint32_t)0x00000070) /*!< Remap TIM17 channel 1 on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_TIM17_UP ((uint32_t)0x00000070) /*!< Remap TIM17 up on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART1_TX ((uint32_t)0x00000080) /*!< Remap USART1 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART2_TX ((uint32_t)0x00000090) /*!< Remap USART2 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART3_TX ((uint32_t)0x000000A0) /*!< Remap USART3 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART4_TX ((uint32_t)0x000000B0) /*!< Remap USART4 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART5_TX ((uint32_t)0x000000C0) /*!< Remap USART5 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART6_TX ((uint32_t)0x000000D0) /*!< Remap USART6 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART7_TX ((uint32_t)0x000000E0) /*!< Remap USART7 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH2_USART8_TX ((uint32_t)0x000000F0) /*!< Remap USART8 Tx on DMA1 channel 2 */
+#define DMA1_CSELR_CH3_TIM6_UP ((uint32_t)0x00000100) /*!< Remap TIM6 up on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_DAC_CH1 ((uint32_t)0x00000100) /*!< Remap DAC Channel 1on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_I2C1_RX ((uint32_t)0x00000200) /*!< Remap I2C1 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_SPI1_TX ((uint32_t)0x00000300) /*!< Remap SPI1 Tx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_TIM1_CH2 ((uint32_t)0x00000400) /*!< Remap TIM1 channel 2 on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_TIM2_CH2 ((uint32_t)0x00000500) /*!< Remap TIM2 channel 2 on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_TIM16_CH1 ((uint32_t)0x00000700) /*!< Remap TIM16 channel 1 on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_TIM16_UP ((uint32_t)0x00000700) /*!< Remap TIM16 up on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART1_RX ((uint32_t)0x00000800) /*!< Remap USART1 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART2_RX ((uint32_t)0x00000900) /*!< Remap USART2 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART3_RX ((uint32_t)0x00000A00) /*!< Remap USART3 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART4_RX ((uint32_t)0x00000B00) /*!< Remap USART4 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART5_RX ((uint32_t)0x00000C00) /*!< Remap USART5 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART6_RX ((uint32_t)0x00000D00) /*!< Remap USART6 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART7_RX ((uint32_t)0x00000E00) /*!< Remap USART7 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH3_USART8_RX ((uint32_t)0x00000F00) /*!< Remap USART8 Rx on DMA1 channel 3 */
+#define DMA1_CSELR_CH4_TIM7_UP ((uint32_t)0x00001000) /*!< Remap TIM7 up on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_DAC_CH2 ((uint32_t)0x00001000) /*!< Remap DAC Channel 2 on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_I2C2_TX ((uint32_t)0x00002000) /*!< Remap I2C2 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_SPI2_RX ((uint32_t)0x00003000) /*!< Remap SPI2 Rx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_TIM2_CH4 ((uint32_t)0x00005000) /*!< Remap TIM2 channel 4 on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_TIM3_CH1 ((uint32_t)0x00006000) /*!< Remap TIM3 channel 1 on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_TIM3_TRIG ((uint32_t)0x00006000) /*!< Remap TIM3 Trig on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_TIM16_CH1 ((uint32_t)0x00007000) /*!< Remap TIM16 channel 1 on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_TIM16_UP ((uint32_t)0x00007000) /*!< Remap TIM16 up on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART1_TX ((uint32_t)0x00008000) /*!< Remap USART1 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART2_TX ((uint32_t)0x00009000) /*!< Remap USART2 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART3_TX ((uint32_t)0x0000A000) /*!< Remap USART3 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART4_TX ((uint32_t)0x0000B000) /*!< Remap USART4 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART5_TX ((uint32_t)0x0000C000) /*!< Remap USART5 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART6_TX ((uint32_t)0x0000D000) /*!< Remap USART6 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART7_TX ((uint32_t)0x0000E000) /*!< Remap USART7 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH4_USART8_TX ((uint32_t)0x0000F000) /*!< Remap USART8 Tx on DMA1 channel 4 */
+#define DMA1_CSELR_CH5_I2C2_RX ((uint32_t)0x00020000) /*!< Remap I2C2 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_SPI2_TX ((uint32_t)0x00030000) /*!< Remap SPI1 Tx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_TIM1_CH3 ((uint32_t)0x00040000) /*!< Remap TIM1 channel 3 on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART1_RX ((uint32_t)0x00080000) /*!< Remap USART1 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART2_RX ((uint32_t)0x00090000) /*!< Remap USART2 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART3_RX ((uint32_t)0x000A0000) /*!< Remap USART3 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART4_RX ((uint32_t)0x000B0000) /*!< Remap USART4 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART5_RX ((uint32_t)0x000C0000) /*!< Remap USART5 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART6_RX ((uint32_t)0x000D0000) /*!< Remap USART6 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART7_RX ((uint32_t)0x000E0000) /*!< Remap USART7 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH5_USART8_RX ((uint32_t)0x000F0000) /*!< Remap USART8 Rx on DMA1 channel 5 */
+#define DMA1_CSELR_CH6_I2C1_TX ((uint32_t)0x00200000) /*!< Remap I2C1 Tx on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_SPI2_RX ((uint32_t)0x00300000) /*!< Remap SPI2 Rx on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_TIM1_CH1 ((uint32_t)0x00400000) /*!< Remap TIM1 channel 1 on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_TIM1_CH2 ((uint32_t)0x00400000) /*!< Remap TIM1 channel 2 on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_TIM1_CH3 ((uint32_t)0x00400000) /*!< Remap TIM1 channel 3 on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_TIM3_CH1 ((uint32_t)0x00600000) /*!< Remap TIM3 channel 1 on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_TIM3_TRIG ((uint32_t)0x00600000) /*!< Remap TIM3 Trig on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_TIM16_CH1 ((uint32_t)0x00700000) /*!< Remap TIM16 channel 1 on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_TIM16_UP ((uint32_t)0x00700000) /*!< Remap TIM16 up on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_USART1_RX ((uint32_t)0x00800000) /*!< Remap USART1 Rx on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_USART2_RX ((uint32_t)0x00900000) /*!< Remap USART2 Rx on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_USART3_RX ((uint32_t)0x00A00000) /*!< Remap USART3 Rx on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_USART4_RX ((uint32_t)0x00B00000) /*!< Remap USART4 Rx on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_USART5_RX ((uint32_t)0x00C00000) /*!< Remap USART5 Rx on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_USART6_RX ((uint32_t)0x00D00000) /*!< Remap USART6 Rx on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_USART7_RX ((uint32_t)0x00E00000) /*!< Remap USART7 Rx on DMA1 channel 6 */
+#define DMA1_CSELR_CH6_USART8_RX ((uint32_t)0x00F00000) /*!< Remap USART8 Rx on DMA1 channel 6 */
+#define DMA1_CSELR_CH7_I2C1_RX ((uint32_t)0x02000000) /*!< Remap I2C1 Rx on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_SPI2_TX ((uint32_t)0x03000000) /*!< Remap SPI2 Tx on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_TIM2_CH2 ((uint32_t)0x05000000) /*!< Remap TIM2 channel 2 on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_TIM2_CH4 ((uint32_t)0x05000000) /*!< Remap TIM2 channel 4 on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_TIM17_CH1 ((uint32_t)0x07000000) /*!< Remap TIM17 channel 1 on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_TIM17_UP ((uint32_t)0x07000000) /*!< Remap TIM17 up on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_USART1_TX ((uint32_t)0x08000000) /*!< Remap USART1 Tx on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_USART2_TX ((uint32_t)0x09000000) /*!< Remap USART2 Tx on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_USART3_TX ((uint32_t)0x0A000000) /*!< Remap USART3 Tx on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_USART4_TX ((uint32_t)0x0B000000) /*!< Remap USART4 Tx on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_USART5_TX ((uint32_t)0x0C000000) /*!< Remap USART5 Tx on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_USART6_TX ((uint32_t)0x0D000000) /*!< Remap USART6 Tx on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_USART7_TX ((uint32_t)0x0E000000) /*!< Remap USART7 Tx on DMA1 channel 7 */
+#define DMA1_CSELR_CH7_USART8_TX ((uint32_t)0x0F000000) /*!< Remap USART8 Tx on DMA1 channel 7 */
+
+/****************** Bit definition for DMA2_CSELR register ********************/
+#define DMA2_CSELR_DEFAULT ((uint32_t)0x00000000) /*!< Default remap position for DMA2 */
+#define DMA2_CSELR_CH1_I2C2_TX ((uint32_t)0x00000002) /*!< Remap I2C2 TX on DMA2 channel 1 */
+#define DMA2_CSELR_CH1_USART1_TX ((uint32_t)0x00000008) /*!< Remap USART1 Tx on DMA2 channel 1 */
+#define DMA2_CSELR_CH1_USART2_TX ((uint32_t)0x00000009) /*!< Remap USART2 Tx on DMA2 channel 1 */
+#define DMA2_CSELR_CH1_USART3_TX ((uint32_t)0x0000000A) /*!< Remap USART3 Tx on DMA2 channel 1 */
+#define DMA2_CSELR_CH1_USART4_TX ((uint32_t)0x0000000B) /*!< Remap USART4 Tx on DMA2 channel 1 */
+#define DMA2_CSELR_CH1_USART5_TX ((uint32_t)0x0000000C) /*!< Remap USART5 Tx on DMA2 channel 1 */
+#define DMA2_CSELR_CH1_USART6_TX ((uint32_t)0x0000000D) /*!< Remap USART6 Tx on DMA2 channel 1 */
+#define DMA2_CSELR_CH1_USART7_TX ((uint32_t)0x0000000E) /*!< Remap USART7 Tx on DMA2 channel 1 */
+#define DMA2_CSELR_CH1_USART8_TX ((uint32_t)0x0000000F) /*!< Remap USART8 Tx on DMA2 channel 1 */
+#define DMA2_CSELR_CH2_I2C2_RX ((uint32_t)0x00000020) /*!< Remap I2C2 Rx on DMA2 channel 2 */
+#define DMA2_CSELR_CH2_USART1_RX ((uint32_t)0x00000080) /*!< Remap USART1 Rx on DMA2 channel 2 */
+#define DMA2_CSELR_CH2_USART2_RX ((uint32_t)0x00000090) /*!< Remap USART2 Rx on DMA2 channel 2 */
+#define DMA2_CSELR_CH2_USART3_RX ((uint32_t)0x000000A0) /*!< Remap USART3 Rx on DMA2 channel 2 */
+#define DMA2_CSELR_CH2_USART4_RX ((uint32_t)0x000000B0) /*!< Remap USART4 Rx on DMA2 channel 2 */
+#define DMA2_CSELR_CH2_USART5_RX ((uint32_t)0x000000C0) /*!< Remap USART5 Rx on DMA2 channel 2 */
+#define DMA2_CSELR_CH2_USART6_RX ((uint32_t)0x000000D0) /*!< Remap USART6 Rx on DMA2 channel 2 */
+#define DMA2_CSELR_CH2_USART7_RX ((uint32_t)0x000000E0) /*!< Remap USART7 Rx on DMA2 channel 2 */
+#define DMA2_CSELR_CH2_USART8_RX ((uint32_t)0x000000F0) /*!< Remap USART8 Rx on DMA2 channel 2 */
+#define DMA2_CSELR_CH3_TIM6_UP ((uint32_t)0x00000100) /*!< Remap TIM6 up on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_DAC_CH1 ((uint32_t)0x00000100) /*!< Remap DAC channel 1 on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_SPI1_RX ((uint32_t)0x00000300) /*!< Remap SPI1 Rx on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_USART1_RX ((uint32_t)0x00000800) /*!< Remap USART1 Rx on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_USART2_RX ((uint32_t)0x00000900) /*!< Remap USART2 Rx on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_USART3_RX ((uint32_t)0x00000A00) /*!< Remap USART3 Rx on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_USART4_RX ((uint32_t)0x00000B00) /*!< Remap USART4 Rx on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_USART5_RX ((uint32_t)0x00000C00) /*!< Remap USART5 Rx on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_USART6_RX ((uint32_t)0x00000D00) /*!< Remap USART6 Rx on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_USART7_RX ((uint32_t)0x00000E00) /*!< Remap USART7 Rx on DMA2 channel 3 */
+#define DMA2_CSELR_CH3_USART8_RX ((uint32_t)0x00000F00) /*!< Remap USART8 Rx on DMA2 channel 3 */
+#define DMA2_CSELR_CH4_TIM7_UP ((uint32_t)0x00001000) /*!< Remap TIM7 up on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_DAC_CH2 ((uint32_t)0x00001000) /*!< Remap DAC channel 2 on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_SPI1_TX ((uint32_t)0x00003000) /*!< Remap SPI1 Tx on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_USART1_TX ((uint32_t)0x00008000) /*!< Remap USART1 Tx on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_USART2_TX ((uint32_t)0x00009000) /*!< Remap USART2 Tx on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_USART3_TX ((uint32_t)0x0000A000) /*!< Remap USART3 Tx on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_USART4_TX ((uint32_t)0x0000B000) /*!< Remap USART4 Tx on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_USART5_TX ((uint32_t)0x0000C000) /*!< Remap USART5 Tx on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_USART6_TX ((uint32_t)0x0000D000) /*!< Remap USART6 Tx on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_USART7_TX ((uint32_t)0x0000E000) /*!< Remap USART7 Tx on DMA2 channel 4 */
+#define DMA2_CSELR_CH4_USART8_TX ((uint32_t)0x0000F000) /*!< Remap USART8 Tx on DMA2 channel 4 */
+#define DMA2_CSELR_CH5_ADC ((uint32_t)0x00010000) /*!< Remap ADC on DMA2 channel 5 */
+#define DMA2_CSELR_CH5_USART1_TX ((uint32_t)0x00080000) /*!< Remap USART1 Tx on DMA2 channel 5 */
+#define DMA2_CSELR_CH5_USART2_TX ((uint32_t)0x00090000) /*!< Remap USART2 Tx on DMA2 channel 5 */
+#define DMA2_CSELR_CH5_USART3_TX ((uint32_t)0x000A0000) /*!< Remap USART3 Tx on DMA2 channel 5 */
+#define DMA2_CSELR_CH5_USART4_TX ((uint32_t)0x000B0000) /*!< Remap USART4 Tx on DMA2 channel 5 */
+#define DMA2_CSELR_CH5_USART5_TX ((uint32_t)0x000C0000) /*!< Remap USART5 Tx on DMA2 channel 5 */
+#define DMA2_CSELR_CH5_USART6_TX ((uint32_t)0x000D0000) /*!< Remap USART6 Tx on DMA2 channel 5 */
+#define DMA2_CSELR_CH5_USART7_TX ((uint32_t)0x000E0000) /*!< Remap USART7 Tx on DMA2 channel 5 */
+#define DMA2_CSELR_CH5_USART8_TX ((uint32_t)0x000F0000) /*!< Remap USART8 Tx on DMA2 channel 5 */
/******************************************************************************/
/* */
@@ -2780,11 +2771,15 @@
#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */
#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR20 ((uint32_t)0x00100000) /*!< Interrupt Mask on line 20 */
#define EXTI_IMR_MR21 ((uint32_t)0x00200000) /*!< Interrupt Mask on line 21 */
#define EXTI_IMR_MR22 ((uint32_t)0x00400000) /*!< Interrupt Mask on line 22 */
#define EXTI_IMR_MR23 ((uint32_t)0x00800000) /*!< Interrupt Mask on line 23 */
#define EXTI_IMR_MR25 ((uint32_t)0x02000000) /*!< Interrupt Mask on line 25 */
+#define EXTI_IMR_MR26 ((uint32_t)0x04000000) /*!< Interrupt Mask on line 26 */
#define EXTI_IMR_MR27 ((uint32_t)0x08000000) /*!< Interrupt Mask on line 27 */
+#define EXTI_IMR_MR28 ((uint32_t)0x10000000) /*!< Interrupt Mask on line 28 */
+#define EXTI_IMR_MR31 ((uint32_t)0x80000000) /*!< Interrupt Mask on line 31 */
/****************** Bit definition for EXTI_EMR register ********************/
#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
@@ -2806,11 +2801,15 @@
#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */
#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR20 ((uint32_t)0x00100000) /*!< Event Mask on line 20 */
#define EXTI_EMR_MR21 ((uint32_t)0x00200000) /*!< Event Mask on line 21 */
#define EXTI_EMR_MR22 ((uint32_t)0x00400000) /*!< Event Mask on line 22 */
#define EXTI_EMR_MR23 ((uint32_t)0x00800000) /*!< Event Mask on line 23 */
#define EXTI_EMR_MR25 ((uint32_t)0x02000000) /*!< Event Mask on line 25 */
+#define EXTI_EMR_MR26 ((uint32_t)0x04000000) /*!< Event Mask on line 26 */
#define EXTI_EMR_MR27 ((uint32_t)0x08000000) /*!< Event Mask on line 27 */
+#define EXTI_EMR_MR28 ((uint32_t)0x10000000) /*!< Event Mask on line 28 */
+#define EXTI_EMR_MR31 ((uint32_t)0x80000000) /*!< Event Mask on line 31 */
/******************* Bit definition for EXTI_RTSR register ******************/
#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
@@ -2832,6 +2831,9 @@
#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+#define EXTI_RTSR_TR20 ((uint32_t)0x00100000) /*!< Rising trigger event configuration bit of line 20 */
+#define EXTI_RTSR_TR21 ((uint32_t)0x00200000) /*!< Rising trigger event configuration bit of line 21 */
+#define EXTI_RTSR_TR22 ((uint32_t)0x00400000) /*!< Rising trigger event configuration bit of line 22 */
/******************* Bit definition for EXTI_FTSR register *******************/
#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
@@ -2853,6 +2855,9 @@
#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+#define EXTI_FTSR_TR20 ((uint32_t)0x00100000) /*!< Falling trigger event configuration bit of line 20 */
+#define EXTI_FTSR_TR21 ((uint32_t)0x00200000) /*!< Falling trigger event configuration bit of line 21 */
+#define EXTI_FTSR_TR22 ((uint32_t)0x00400000) /*!< Falling trigger event configuration bit of line 22 */
/******************* Bit definition for EXTI_SWIER register *******************/
#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
@@ -2874,6 +2879,9 @@
#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+#define EXTI_SWIER_SWIER20 ((uint32_t)0x00100000) /*!< Software Interrupt on line 20 */
+#define EXTI_SWIER_SWIER21 ((uint32_t)0x00200000) /*!< Software Interrupt on line 21 */
+#define EXTI_SWIER_SWIER22 ((uint32_t)0x00400000) /*!< Software Interrupt on line 22 */
/****************** Bit definition for EXTI_PR register *********************/
#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit 0 */
@@ -2895,6 +2903,9 @@
#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit 16 */
#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit 17 */
#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit 19 */
+#define EXTI_PR_PR20 ((uint32_t)0x00100000) /*!< Pending bit 20 */
+#define EXTI_PR_PR21 ((uint32_t)0x00200000) /*!< Pending bit 21 */
+#define EXTI_PR_PR22 ((uint32_t)0x00400000) /*!< Pending bit 22 */
/******************************************************************************/
/* */
@@ -5320,14 +5331,20 @@
((INSTANCE) == DMA2_Channel5))
/****************************** GPIO Instances ********************************/
-#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
- ((INSTANCE) == GPIOB) || \
- ((INSTANCE) == GPIOC) || \
- ((INSTANCE) == GPIOD) || \
- ((INSTANCE) == GPIOE) || \
- ((INSTANCE) == GPIOF))
-
-/****************************** GPIO Lock Instances ****************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOE) || \
+ ((INSTANCE) == GPIOF))
+
+#define IS_GPIO_AF_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOE) || \
+ ((INSTANCE) == GPIOF))
+
#define IS_GPIO_LOCK_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
((INSTANCE) == GPIOB))
--- a/TARGET_NUCLEO_F091RC/stm32f0xx.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx.h
* @author MCD Application Team
- * @version V2.1.0
- * @date 03-Oct-2014
+ * @version V2.2.0
+ * @date 05-December-2014
* @brief CMSIS STM32F0xx Device Peripheral Access Layer Header File.
*
* The file is the unique include file that the application programmer
@@ -70,10 +70,10 @@
#if !defined (STM32F030x6) && !defined (STM32F030x8) && \
!defined (STM32F031x6) && !defined (STM32F038xx) && \
- !defined (STM32F042x6) && !defined (STM32F048xx) && \
+ !defined (STM32F042x6) && !defined (STM32F048xx) && !defined (STM32F070x6) && \
!defined (STM32F051x8) && !defined (STM32F058xx) && \
- !defined (STM32F071xB) && !defined (STM32F072xB) && !defined (STM32F078xx) && \
- !defined (STM32F091xC) && !defined (STM32F098xx)
+ !defined (STM32F071xB) && !defined (STM32F072xB) && !defined (STM32F078xx) && !defined (STM32F070xB) && \
+ !defined (STM32F091xC) && !defined (STM32F098xx) && !defined (STM32F030xC)
/* #define STM32F030x6 */ /*!< STM32F030x4, STM32F030x6 Devices (STM32F030xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
/* #define STM32F030x8 */ /*!< STM32F030x8 Devices (STM32F030xx microcontrollers where the Flash memory is 64 Kbytes) */
/* #define STM32F031x6 */ /*!< STM32F031x4, STM32F031x6 Devices (STM32F031xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
@@ -82,9 +82,12 @@
/* #define STM32F048x6 */ /*!< STM32F048xx Devices (STM32F042xx microcontrollers where the Flash memory is 32 Kbytes) */
/* #define STM32F051x8 */ /*!< STM32F051x4, STM32F051x6, STM32F051x8 Devices (STM32F051xx microcontrollers where the Flash memory ranges between 16 and 64 Kbytes) */
/* #define STM32F058xx */ /*!< STM32F058xx Devices (STM32F058xx microcontrollers where the Flash memory is 64 Kbytes) */
+ /* #define STM32F070x6 */ /*!< STM32F070x6 Devices (STM32F070x6 microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */
+ /* #define STM32F070xB */ /*!< STM32F070xB Devices (STM32F070xB microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */
/* #define STM32F071xB */ /*!< STM32F071x8, STM32F071xB Devices (STM32F071xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */
/* #define STM32F072xB */ /*!< STM32F072x8, STM32F072xB Devices (STM32F072xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */
/* #define STM32F078xx */ /*!< STM32F078xx Devices (STM32F078xx microcontrollers where the Flash memory is 128 Kbytes) */
+ /* #define STM32F030xC */ /*!< STM32F030xC Devices (STM32F030xC microcontrollers where the Flash memory is 256 Kbytes) */
#define STM32F091xC /*!< STM32F091xC Devices (STM32F091xx microcontrollers where the Flash memory is 256 Kbytes) */
/* #define STM32F098xx */ /*!< STM32F098xx Devices (STM32F098xx microcontrollers where the Flash memory is 256 Kbytes) */
#endif
@@ -102,10 +105,10 @@
#endif /* USE_HAL_DRIVER */
/**
- * @brief CMSIS Device version number V2.1.0
+ * @brief CMSIS Device version number V2.2.0
*/
#define __STM32F0xx_CMSIS_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */
-#define __STM32F0xx_CMSIS_DEVICE_VERSION_SUB1 (0x01) /*!< [23:16] sub1 version */
+#define __STM32F0xx_CMSIS_DEVICE_VERSION_SUB1 (0x02) /*!< [23:16] sub1 version */
#define __STM32F0xx_CMSIS_DEVICE_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
#define __STM32F0xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */
#define __STM32F0xx_CMSIS_DEVICE_VERSION ((__CMSIS_DEVICE_VERSION_MAIN << 24)\
@@ -137,6 +140,10 @@
#include "stm32f051x8.h"
#elif defined(STM32F058xx)
#include "stm32f058xx.h"
+#elif defined(STM32F070x6)
+ #include "stm32f070x6.h"
+#elif defined(STM32F070xB)
+ #include "stm32f070xb.h"
#elif defined(STM32F071xB)
#include "stm32f071xb.h"
#elif defined(STM32F072xB)
@@ -146,7 +153,9 @@
#elif defined(STM32F091xC)
#include "stm32f091xc.h"
#elif defined(STM32F098xx)
- #include "stm32f098xx.h"
+ #include "stm32f098xx.h"
+#elif defined(STM32F030xC)
+ #include "stm32f030xc.h"
#else
#error "Please select first the target STM32F0xx device used in your application (in stm32f0xx.h file)"
#endif
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief This file contains all the functions prototypes for the HAL
* module driver.
******************************************************************************
@@ -154,8 +154,9 @@
*/
#endif /* SYSCFG_CFGR1_PA11_PA12_RMP */
-#if defined(STM32F091xC)
+#if defined(STM32F091xC) || defined(STM32F098xx)
/** @defgroup HAL_IRDA_ENV_SEL HAL IRDA Enveloppe Selection
+ * @note Applicable on STM32F09x
* @{
*/
#define HAL_SYSCFG_IRDA_ENV_SEL_TIM16 (SYSCFG_CFGR1_IRDA_ENV_SEL_0 & SYSCFG_CFGR1_IRDA_ENV_SEL_1) /* 00: Timer16 is selected as IRDA Modulation enveloppe source */
@@ -168,7 +169,7 @@
/**
* @}
*/
-#endif /* STM32F091xC */
+#endif /* STM32F091xC || STM32F098xx */
/** @defgroup HAL_FastModePlus_I2C HAL FastModePlus I2C
@@ -211,22 +212,22 @@
#endif /* SYSCFG_CFGR1_I2C_FMP_I2C2 */
#if defined(SYSCFG_CFGR1_I2C_FMP_PA9)
-#define HAL_SYSCFG_FASTMODEPLUS_I2C2_PA9 (SYSCFG_CFGR1_I2C_FMP_PA9) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA9 (SYSCFG_CFGR1_I2C_FMP_PA9) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
0: PA9 pin operates in standard mode
1: FM+ mode is enabled on PA9 pin, and the Speed control is bypassed */
#endif /* SYSCFG_CFGR1_I2C_FMP_PA9 */
#if defined(SYSCFG_CFGR1_I2C_FMP_PA10)
-#define HAL_SYSCFG_FASTMODEPLUS_I2C2_PA10 (SYSCFG_CFGR1_I2C_FMP_PA10) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PA10 (SYSCFG_CFGR1_I2C_FMP_PA10) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
0: PA10 pin operates in standard mode
1: FM+ mode is enabled on PA10 pin, and the Speed control is bypassed */
#endif /* SYSCFG_CFGR1_I2C_FMP_PA10 */
-#if defined(STM32F091xC)|| defined(STM32F098xx)
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F042x6) || defined(STM32F048xx)
#define IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG(CONFIG) (((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C1) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C2) || \
- ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C2_PA9) || \
- ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C2_PA10) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PA9) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PA10) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) || \
@@ -238,20 +239,14 @@
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB9))
-#elif defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx)
+#elif defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || defined(STM32F070x6) || defined(STM32F070xB) || defined(STM32F030x6)
#define IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG(CONFIG) (((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C1) || \
- ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C2_PA9) || \
- ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C2_PA10) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PA9) || \
+ ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PA10) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB9))
-#elif defined(STM32F042x6) || defined(STM32F048xx)
-#define IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG(CONFIG) (((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C1) || \
- ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) || \
- ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
- ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) || \
- ((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB9))
#else
#define IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG(CONFIG) (((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) || \
((CONFIG) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
@@ -265,113 +260,115 @@
#if defined(STM32F091xC) || defined (STM32F098xx)
/** @defgroup HAL_ISR_Wrapper HAL ISR Wrapper
+ * @brief ISR Wrapper
+ * @note applicable on STM32F09x
* @{
*/
-#define HAL_SYSCFG_ITLINE0 ((uint32_t) 0x00000000)
-#define HAL_SYSCFG_ITLINE1 ((uint32_t) 0x00000001)
-#define HAL_SYSCFG_ITLINE2 ((uint32_t) 0x00000002)
-#define HAL_SYSCFG_ITLINE3 ((uint32_t) 0x00000003)
-#define HAL_SYSCFG_ITLINE4 ((uint32_t) 0x00000004)
-#define HAL_SYSCFG_ITLINE5 ((uint32_t) 0x00000005)
-#define HAL_SYSCFG_ITLINE6 ((uint32_t) 0x00000006)
-#define HAL_SYSCFG_ITLINE7 ((uint32_t) 0x00000007)
-#define HAL_SYSCFG_ITLINE8 ((uint32_t) 0x00000008)
-#define HAL_SYSCFG_ITLINE9 ((uint32_t) 0x00000009)
-#define HAL_SYSCFG_ITLINE10 ((uint32_t) 0x0000000A)
-#define HAL_SYSCFG_ITLINE11 ((uint32_t) 0x0000000B)
-#define HAL_SYSCFG_ITLINE12 ((uint32_t) 0x0000000C)
-#define HAL_SYSCFG_ITLINE13 ((uint32_t) 0x0000000D)
-#define HAL_SYSCFG_ITLINE14 ((uint32_t) 0x0000000E)
-#define HAL_SYSCFG_ITLINE15 ((uint32_t) 0x0000000F)
-#define HAL_SYSCFG_ITLINE16 ((uint32_t) 0x00000010)
-#define HAL_SYSCFG_ITLINE17 ((uint32_t) 0x00000011)
-#define HAL_SYSCFG_ITLINE18 ((uint32_t) 0x00000012)
-#define HAL_SYSCFG_ITLINE19 ((uint32_t) 0x00000013)
-#define HAL_SYSCFG_ITLINE20 ((uint32_t) 0x00000014)
-#define HAL_SYSCFG_ITLINE21 ((uint32_t) 0x00000015)
-#define HAL_SYSCFG_ITLINE22 ((uint32_t) 0x00000016)
-#define HAL_SYSCFG_ITLINE23 ((uint32_t) 0x00000017)
-#define HAL_SYSCFG_ITLINE24 ((uint32_t) 0x00000018)
-#define HAL_SYSCFG_ITLINE25 ((uint32_t) 0x00000019)
-#define HAL_SYSCFG_ITLINE26 ((uint32_t) 0x0000001A)
-#define HAL_SYSCFG_ITLINE27 ((uint32_t) 0x0000001B)
-#define HAL_SYSCFG_ITLINE28 ((uint32_t) 0x0000001C)
-#define HAL_SYSCFG_ITLINE29 ((uint32_t) 0x0000001D)
-#define HAL_SYSCFG_ITLINE30 ((uint32_t) 0x0000001E)
-#define HAL_SYSCFG_ITLINE31 ((uint32_t) 0x0000001F)
+#define HAL_SYSCFG_ITLINE0 ((uint32_t) 0x00000000) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE1 ((uint32_t) 0x00000001) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE2 ((uint32_t) 0x00000002) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE3 ((uint32_t) 0x00000003) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE4 ((uint32_t) 0x00000004) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE5 ((uint32_t) 0x00000005) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE6 ((uint32_t) 0x00000006) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE7 ((uint32_t) 0x00000007) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE8 ((uint32_t) 0x00000008) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE9 ((uint32_t) 0x00000009) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE10 ((uint32_t) 0x0000000A) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE11 ((uint32_t) 0x0000000B) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE12 ((uint32_t) 0x0000000C) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE13 ((uint32_t) 0x0000000D) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE14 ((uint32_t) 0x0000000E) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE15 ((uint32_t) 0x0000000F) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE16 ((uint32_t) 0x00000010) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE17 ((uint32_t) 0x00000011) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE18 ((uint32_t) 0x00000012) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE19 ((uint32_t) 0x00000013) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE20 ((uint32_t) 0x00000014) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE21 ((uint32_t) 0x00000015) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE22 ((uint32_t) 0x00000016) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE23 ((uint32_t) 0x00000017) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE24 ((uint32_t) 0x00000018) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE25 ((uint32_t) 0x00000019) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE26 ((uint32_t) 0x0000001A) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE27 ((uint32_t) 0x0000001B) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE28 ((uint32_t) 0x0000001C) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE29 ((uint32_t) 0x0000001D) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE30 ((uint32_t) 0x0000001E) /*!< Internal define for macro handling */
+#define HAL_SYSCFG_ITLINE31 ((uint32_t) 0x0000001F) /*!< Internal define for macro handling */
-#define HAL_ITLINE_EWDG ((uint32_t) ((HAL_SYSCFG_ITLINE0 << 0x18) | SYSCFG_ITLINE0_SR_EWDG)) /* EWDG has expired .... */
+#define HAL_ITLINE_EWDG ((uint32_t) ((HAL_SYSCFG_ITLINE0 << 0x18) | SYSCFG_ITLINE0_SR_EWDG)) /*!< EWDG has expired .... */
#if defined(STM32F091xC)
-#define HAL_ITLINE_PVDOUT ((uint32_t) ((HAL_SYSCFG_ITLINE1 << 0x18) | SYSCFG_ITLINE1_SR_PVDOUT)) /* Power voltage detection Interrupt .... */
+#define HAL_ITLINE_PVDOUT ((uint32_t) ((HAL_SYSCFG_ITLINE1 << 0x18) | SYSCFG_ITLINE1_SR_PVDOUT)) /*!< Power voltage detection Interrupt .... */
#endif
-#define HAL_ITLINE_VDDIO2 ((uint32_t) ((HAL_SYSCFG_ITLINE1 << 0x18) | SYSCFG_ITLINE1_SR_VDDIO2)) /* VDDIO2 Interrupt .... */
-#define HAL_ITLINE_RTC_WAKEUP ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18) | SYSCFG_ITLINE2_SR_RTC_WAKEUP)) /* RTC WAKEUP -> exti[20] Interrupt */
-#define HAL_ITLINE_RTC_TSTAMP ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18) | SYSCFG_ITLINE2_SR_RTC_TSTAMP)) /* RTC Time Stamp -> exti[19] interrupt */
-#define HAL_ITLINE_RTC_ALRA ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18) | SYSCFG_ITLINE2_SR_RTC_ALRA)) /* RTC Alarm -> exti[17] interrupt .... */
-#define HAL_ITLINE_FLASH_ITF ((uint32_t) ((HAL_SYSCFG_ITLINE3 << 0x18) | SYSCFG_ITLINE3_SR_FLASH_ITF)) /* Flash ITF Interrupt */
-#define HAL_ITLINE_CRS ((uint32_t) ((HAL_SYSCFG_ITLINE4 << 0x18) | SYSCFG_ITLINE4_SR_CRS)) /* CRS Interrupt */
-#define HAL_ITLINE_CLK_CTRL ((uint32_t) ((HAL_SYSCFG_ITLINE4 << 0x18) | SYSCFG_ITLINE4_SR_CLK_CTRL)) /* CLK Control Interrupt */
-#define HAL_ITLINE_EXTI0 ((uint32_t) ((HAL_SYSCFG_ITLINE5 << 0x18) | SYSCFG_ITLINE5_SR_EXTI0)) /* External Interrupt 0 */
-#define HAL_ITLINE_EXTI1 ((uint32_t) ((HAL_SYSCFG_ITLINE5 << 0x18) | SYSCFG_ITLINE5_SR_EXTI1)) /* External Interrupt 1 */
-#define HAL_ITLINE_EXTI2 ((uint32_t) ((HAL_SYSCFG_ITLINE6 << 0x18) | SYSCFG_ITLINE6_SR_EXTI2)) /* External Interrupt 2 */
-#define HAL_ITLINE_EXTI3 ((uint32_t) ((HAL_SYSCFG_ITLINE6 << 0x18) | SYSCFG_ITLINE6_SR_EXTI3)) /* External Interrupt 3 */
-#define HAL_ITLINE_EXTI4 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI4)) /* EXTI4 Interrupt */
-#define HAL_ITLINE_EXTI5 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI5)) /* EXTI5 Interrupt */
-#define HAL_ITLINE_EXTI6 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI6)) /* EXTI6 Interrupt */
-#define HAL_ITLINE_EXTI7 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI7)) /* EXTI7 Interrupt */
-#define HAL_ITLINE_EXTI8 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI8)) /* EXTI8 Interrupt */
-#define HAL_ITLINE_EXTI9 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI9)) /* EXTI9 Interrupt */
-#define HAL_ITLINE_EXTI10 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI10)) /* EXTI10 Interrupt */
-#define HAL_ITLINE_EXTI11 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI11)) /* EXTI11 Interrupt */
-#define HAL_ITLINE_EXTI12 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI12)) /* EXTI12 Interrupt */
-#define HAL_ITLINE_EXTI13 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI13)) /* EXTI13 Interrupt */
-#define HAL_ITLINE_EXTI14 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI14)) /* EXTI14 Interrupt */
-#define HAL_ITLINE_EXTI15 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI15)) /* EXTI15 Interrupt */
-#define HAL_ITLINE_TSC_EOA ((uint32_t) ((HAL_SYSCFG_ITLINE8 << 0x18) | SYSCFG_ITLINE8_SR_TSC_EOA)) /* Touch control EOA Interrupt */
-#define HAL_ITLINE_TSC_MCE ((uint32_t) ((HAL_SYSCFG_ITLINE8 << 0x18) | SYSCFG_ITLINE8_SR_TSC_MCE)) /* Touch control MCE Interrupt */
-#define HAL_ITLINE_DMA1_CH1 ((uint32_t) ((HAL_SYSCFG_ITLINE9 << 0x18) | SYSCFG_ITLINE9_SR_DMA1_CH1)) /* DMA1 Channel 1 Interrupt */
-#define HAL_ITLINE_DMA1_CH2 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA1_CH2)) /* DMA1 Channel 2 Interrupt */
-#define HAL_ITLINE_DMA1_CH3 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA1_CH3)) /* DMA1 Channel 3 Interrupt */
-#define HAL_ITLINE_DMA2_CH1 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA2_CH1)) /* DMA2 Channel 1 Interrupt */
-#define HAL_ITLINE_DMA2_CH2 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA2_CH2)) /* DMA2 Channel 2 Interrupt */
-#define HAL_ITLINE_DMA1_CH4 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH4)) /* DMA1 Channel 4 Interrupt */
-#define HAL_ITLINE_DMA1_CH5 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH5)) /* DMA1 Channel 5 Interrupt */
-#define HAL_ITLINE_DMA1_CH6 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH6)) /* DMA1 Channel 6 Interrupt */
-#define HAL_ITLINE_DMA1_CH7 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH7)) /* DMA1 Channel 7 Interrupt */
-#define HAL_ITLINE_DMA2_CH3 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA2_CH3)) /* DMA2 Channel 3 Interrupt */
-#define HAL_ITLINE_DMA2_CH4 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA2_CH4)) /* DMA2 Channel 4 Interrupt */
-#define HAL_ITLINE_DMA2_CH5 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA2_CH5)) /* DMA2 Channel 5 Interrupt */
-#define HAL_ITLINE_ADC ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18) | SYSCFG_ITLINE12_SR_ADC)) /* ADC Interrupt */
-#define HAL_ITLINE_COMP1 ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18) | SYSCFG_ITLINE12_SR_COMP1)) /* COMP1 Interrupt -> exti[21] */
-#define HAL_ITLINE_COMP2 ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18) | SYSCFG_ITLINE12_SR_COMP2)) /* COMP2 Interrupt -> exti[21] */
-#define HAL_ITLINE_TIM1_BRK ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_BRK)) /* TIM1 BRK Interrupt */
-#define HAL_ITLINE_TIM1_UPD ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_UPD)) /* TIM1 UPD Interrupt */
-#define HAL_ITLINE_TIM1_TRG ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_TRG)) /* TIM1 TRG Interrupt */
-#define HAL_ITLINE_TIM1_CCU ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_CCU)) /* TIM1 CCU Interrupt */
-#define HAL_ITLINE_TIM1_CC ((uint32_t) ((HAL_SYSCFG_ITLINE14 << 0x18) | SYSCFG_ITLINE14_SR_TIM1_CC)) /* TIM1 CC Interrupt */
-#define HAL_ITLINE_TIM2 ((uint32_t) ((HAL_SYSCFG_ITLINE15 << 0x18) | SYSCFG_ITLINE15_SR_TIM2_GLB)) /* TIM2 Interrupt */
-#define HAL_ITLINE_TIM3 ((uint32_t) ((HAL_SYSCFG_ITLINE16 << 0x18) | SYSCFG_ITLINE16_SR_TIM3_GLB)) /* TIM3 Interrupt */
-#define HAL_ITLINE_DAC ((uint32_t) ((HAL_SYSCFG_ITLINE17 << 0x18) | SYSCFG_ITLINE17_SR_DAC)) /* DAC Interrupt */
-#define HAL_ITLINE_TIM6 ((uint32_t) ((HAL_SYSCFG_ITLINE17 << 0x18) | SYSCFG_ITLINE17_SR_TIM6_GLB)) /* TIM6 Interrupt */
-#define HAL_ITLINE_TIM7 ((uint32_t) ((HAL_SYSCFG_ITLINE18 << 0x18) | SYSCFG_ITLINE18_SR_TIM7_GLB)) /* TIM7 Interrupt */
-#define HAL_ITLINE_TIM14 ((uint32_t) ((HAL_SYSCFG_ITLINE19 << 0x18) | SYSCFG_ITLINE19_SR_TIM14_GLB)) /* TIM14 Interrupt */
-#define HAL_ITLINE_TIM15 ((uint32_t) ((HAL_SYSCFG_ITLINE20 << 0x18) | SYSCFG_ITLINE20_SR_TIM15_GLB)) /* TIM15 Interrupt */
-#define HAL_ITLINE_TIM16 ((uint32_t) ((HAL_SYSCFG_ITLINE21 << 0x18) | SYSCFG_ITLINE21_SR_TIM16_GLB)) /* TIM16 Interrupt */
-#define HAL_ITLINE_TIM17 ((uint32_t) ((HAL_SYSCFG_ITLINE22 << 0x18) | SYSCFG_ITLINE22_SR_TIM17_GLB)) /* TIM17 Interrupt */
-#define HAL_ITLINE_I2C1 ((uint32_t) ((HAL_SYSCFG_ITLINE23 << 0x18) | SYSCFG_ITLINE23_SR_I2C1_GLB)) /* I2C1 Interrupt -> exti[23] */
-#define HAL_ITLINE_I2C2 ((uint32_t) ((HAL_SYSCFG_ITLINE24 << 0x18) | SYSCFG_ITLINE24_SR_I2C2_GLB)) /* I2C2 Interrupt */
-#define HAL_ITLINE_SPI1 ((uint32_t) ((HAL_SYSCFG_ITLINE25 << 0x18) | SYSCFG_ITLINE25_SR_SPI1)) /* I2C1 Interrupt -> exti[23] */
-#define HAL_ITLINE_SPI2 ((uint32_t) ((HAL_SYSCFG_ITLINE26 << 0x18) | SYSCFG_ITLINE26_SR_SPI2)) /* SPI1 Interrupt */
+#define HAL_ITLINE_VDDIO2 ((uint32_t) ((HAL_SYSCFG_ITLINE1 << 0x18) | SYSCFG_ITLINE1_SR_VDDIO2)) /*!< VDDIO2 Interrupt .... */
+#define HAL_ITLINE_RTC_WAKEUP ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18) | SYSCFG_ITLINE2_SR_RTC_WAKEUP)) /*!< RTC WAKEUP -> exti[20] Interrupt */
+#define HAL_ITLINE_RTC_TSTAMP ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18) | SYSCFG_ITLINE2_SR_RTC_TSTAMP)) /*!< RTC Time Stamp -> exti[19] interrupt */
+#define HAL_ITLINE_RTC_ALRA ((uint32_t) ((HAL_SYSCFG_ITLINE2 << 0x18) | SYSCFG_ITLINE2_SR_RTC_ALRA)) /*!< RTC Alarm -> exti[17] interrupt .... */
+#define HAL_ITLINE_FLASH_ITF ((uint32_t) ((HAL_SYSCFG_ITLINE3 << 0x18) | SYSCFG_ITLINE3_SR_FLASH_ITF)) /*!< Flash ITF Interrupt */
+#define HAL_ITLINE_CRS ((uint32_t) ((HAL_SYSCFG_ITLINE4 << 0x18) | SYSCFG_ITLINE4_SR_CRS)) /*!< CRS Interrupt */
+#define HAL_ITLINE_CLK_CTRL ((uint32_t) ((HAL_SYSCFG_ITLINE4 << 0x18) | SYSCFG_ITLINE4_SR_CLK_CTRL)) /*!< CLK Control Interrupt */
+#define HAL_ITLINE_EXTI0 ((uint32_t) ((HAL_SYSCFG_ITLINE5 << 0x18) | SYSCFG_ITLINE5_SR_EXTI0)) /*!< External Interrupt 0 */
+#define HAL_ITLINE_EXTI1 ((uint32_t) ((HAL_SYSCFG_ITLINE5 << 0x18) | SYSCFG_ITLINE5_SR_EXTI1)) /*!< External Interrupt 1 */
+#define HAL_ITLINE_EXTI2 ((uint32_t) ((HAL_SYSCFG_ITLINE6 << 0x18) | SYSCFG_ITLINE6_SR_EXTI2)) /*!< External Interrupt 2 */
+#define HAL_ITLINE_EXTI3 ((uint32_t) ((HAL_SYSCFG_ITLINE6 << 0x18) | SYSCFG_ITLINE6_SR_EXTI3)) /*!< External Interrupt 3 */
+#define HAL_ITLINE_EXTI4 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI4)) /*!< EXTI4 Interrupt */
+#define HAL_ITLINE_EXTI5 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI5)) /*!< EXTI5 Interrupt */
+#define HAL_ITLINE_EXTI6 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI6)) /*!< EXTI6 Interrupt */
+#define HAL_ITLINE_EXTI7 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI7)) /*!< EXTI7 Interrupt */
+#define HAL_ITLINE_EXTI8 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI8)) /*!< EXTI8 Interrupt */
+#define HAL_ITLINE_EXTI9 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI9)) /*!< EXTI9 Interrupt */
+#define HAL_ITLINE_EXTI10 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI10)) /*!< EXTI10 Interrupt */
+#define HAL_ITLINE_EXTI11 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI11)) /*!< EXTI11 Interrupt */
+#define HAL_ITLINE_EXTI12 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI12)) /*!< EXTI12 Interrupt */
+#define HAL_ITLINE_EXTI13 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI13)) /*!< EXTI13 Interrupt */
+#define HAL_ITLINE_EXTI14 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI14)) /*!< EXTI14 Interrupt */
+#define HAL_ITLINE_EXTI15 ((uint32_t) ((HAL_SYSCFG_ITLINE7 << 0x18) | SYSCFG_ITLINE7_SR_EXTI15)) /*!< EXTI15 Interrupt */
+#define HAL_ITLINE_TSC_EOA ((uint32_t) ((HAL_SYSCFG_ITLINE8 << 0x18) | SYSCFG_ITLINE8_SR_TSC_EOA)) /*!< Touch control EOA Interrupt */
+#define HAL_ITLINE_TSC_MCE ((uint32_t) ((HAL_SYSCFG_ITLINE8 << 0x18) | SYSCFG_ITLINE8_SR_TSC_MCE)) /*!< Touch control MCE Interrupt */
+#define HAL_ITLINE_DMA1_CH1 ((uint32_t) ((HAL_SYSCFG_ITLINE9 << 0x18) | SYSCFG_ITLINE9_SR_DMA1_CH1)) /*!< DMA1 Channel 1 Interrupt */
+#define HAL_ITLINE_DMA1_CH2 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA1_CH2)) /*!< DMA1 Channel 2 Interrupt */
+#define HAL_ITLINE_DMA1_CH3 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA1_CH3)) /*!< DMA1 Channel 3 Interrupt */
+#define HAL_ITLINE_DMA2_CH1 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA2_CH1)) /*!< DMA2 Channel 1 Interrupt */
+#define HAL_ITLINE_DMA2_CH2 ((uint32_t) ((HAL_SYSCFG_ITLINE10 << 0x18) | SYSCFG_ITLINE10_SR_DMA2_CH2)) /*!< DMA2 Channel 2 Interrupt */
+#define HAL_ITLINE_DMA1_CH4 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH4)) /*!< DMA1 Channel 4 Interrupt */
+#define HAL_ITLINE_DMA1_CH5 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH5)) /*!< DMA1 Channel 5 Interrupt */
+#define HAL_ITLINE_DMA1_CH6 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH6)) /*!< DMA1 Channel 6 Interrupt */
+#define HAL_ITLINE_DMA1_CH7 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA1_CH7)) /*!< DMA1 Channel 7 Interrupt */
+#define HAL_ITLINE_DMA2_CH3 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA2_CH3)) /*!< DMA2 Channel 3 Interrupt */
+#define HAL_ITLINE_DMA2_CH4 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA2_CH4)) /*!< DMA2 Channel 4 Interrupt */
+#define HAL_ITLINE_DMA2_CH5 ((uint32_t) ((HAL_SYSCFG_ITLINE11 << 0x18) | SYSCFG_ITLINE11_SR_DMA2_CH5)) /*!< DMA2 Channel 5 Interrupt */
+#define HAL_ITLINE_ADC ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18) | SYSCFG_ITLINE12_SR_ADC)) /*!< ADC Interrupt */
+#define HAL_ITLINE_COMP1 ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18) | SYSCFG_ITLINE12_SR_COMP1)) /*!< COMP1 Interrupt -> exti[21] */
+#define HAL_ITLINE_COMP2 ((uint32_t) ((HAL_SYSCFG_ITLINE12 << 0x18) | SYSCFG_ITLINE12_SR_COMP2)) /*!< COMP2 Interrupt -> exti[21] */
+#define HAL_ITLINE_TIM1_BRK ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_BRK)) /*!< TIM1 BRK Interrupt */
+#define HAL_ITLINE_TIM1_UPD ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_UPD)) /*!< TIM1 UPD Interrupt */
+#define HAL_ITLINE_TIM1_TRG ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_TRG)) /*!< TIM1 TRG Interrupt */
+#define HAL_ITLINE_TIM1_CCU ((uint32_t) ((HAL_SYSCFG_ITLINE13 << 0x18) | SYSCFG_ITLINE13_SR_TIM1_CCU)) /*!< TIM1 CCU Interrupt */
+#define HAL_ITLINE_TIM1_CC ((uint32_t) ((HAL_SYSCFG_ITLINE14 << 0x18) | SYSCFG_ITLINE14_SR_TIM1_CC)) /*!< TIM1 CC Interrupt */
+#define HAL_ITLINE_TIM2 ((uint32_t) ((HAL_SYSCFG_ITLINE15 << 0x18) | SYSCFG_ITLINE15_SR_TIM2_GLB)) /*!< TIM2 Interrupt */
+#define HAL_ITLINE_TIM3 ((uint32_t) ((HAL_SYSCFG_ITLINE16 << 0x18) | SYSCFG_ITLINE16_SR_TIM3_GLB)) /*!< TIM3 Interrupt */
+#define HAL_ITLINE_DAC ((uint32_t) ((HAL_SYSCFG_ITLINE17 << 0x18) | SYSCFG_ITLINE17_SR_DAC)) /*!< DAC Interrupt */
+#define HAL_ITLINE_TIM6 ((uint32_t) ((HAL_SYSCFG_ITLINE17 << 0x18) | SYSCFG_ITLINE17_SR_TIM6_GLB)) /*!< TIM6 Interrupt */
+#define HAL_ITLINE_TIM7 ((uint32_t) ((HAL_SYSCFG_ITLINE18 << 0x18) | SYSCFG_ITLINE18_SR_TIM7_GLB)) /*!< TIM7 Interrupt */
+#define HAL_ITLINE_TIM14 ((uint32_t) ((HAL_SYSCFG_ITLINE19 << 0x18) | SYSCFG_ITLINE19_SR_TIM14_GLB)) /*!< TIM14 Interrupt */
+#define HAL_ITLINE_TIM15 ((uint32_t) ((HAL_SYSCFG_ITLINE20 << 0x18) | SYSCFG_ITLINE20_SR_TIM15_GLB)) /*!< TIM15 Interrupt */
+#define HAL_ITLINE_TIM16 ((uint32_t) ((HAL_SYSCFG_ITLINE21 << 0x18) | SYSCFG_ITLINE21_SR_TIM16_GLB)) /*!< TIM16 Interrupt */
+#define HAL_ITLINE_TIM17 ((uint32_t) ((HAL_SYSCFG_ITLINE22 << 0x18) | SYSCFG_ITLINE22_SR_TIM17_GLB)) /*!< TIM17 Interrupt */
+#define HAL_ITLINE_I2C1 ((uint32_t) ((HAL_SYSCFG_ITLINE23 << 0x18) | SYSCFG_ITLINE23_SR_I2C1_GLB)) /*!< I2C1 Interrupt -> exti[23] */
+#define HAL_ITLINE_I2C2 ((uint32_t) ((HAL_SYSCFG_ITLINE24 << 0x18) | SYSCFG_ITLINE24_SR_I2C2_GLB)) /*!< I2C2 Interrupt */
+#define HAL_ITLINE_SPI1 ((uint32_t) ((HAL_SYSCFG_ITLINE25 << 0x18) | SYSCFG_ITLINE25_SR_SPI1)) /*!< I2C1 Interrupt -> exti[23] */
+#define HAL_ITLINE_SPI2 ((uint32_t) ((HAL_SYSCFG_ITLINE26 << 0x18) | SYSCFG_ITLINE26_SR_SPI2)) /*!< SPI1 Interrupt */
#define HAL_ITLINE_USART1 ((uint32_t) ((HAL_SYSCFG_ITLINE27 << 0x18) | SYSCFG_ITLINE27_SR_USART1_GLB)) /*!< USART1 GLB Interrupt -> exti[25] */
#define HAL_ITLINE_USART2 ((uint32_t) ((HAL_SYSCFG_ITLINE28 << 0x18) | SYSCFG_ITLINE28_SR_USART2_GLB)) /*!< USART2 GLB Interrupt -> exti[26] */
-#define HAL_ITLINE_USART3 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART3_GLB)) /* USART3 Interrupt .... */
-#define HAL_ITLINE_USART4 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART4_GLB)) /* USART4 Interrupt .... */
-#define HAL_ITLINE_USART5 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART5_GLB)) /* USART5 Interrupt .... */
-#define HAL_ITLINE_USART6 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART6_GLB)) /* USART6 Interrupt .... */
-#define HAL_ITLINE_USART7 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART7_GLB)) /* USART7 Interrupt .... */
-#define HAL_ITLINE_USART8 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART8_GLB)) /* USART8 Interrupt .... */
-#define HAL_ITLINE_CAN ((uint32_t) ((HAL_SYSCFG_ITLINE30 << 0x18) | SYSCFG_ITLINE30_SR_CAN)) /* CAN Interrupt */
-#define HAL_ITLINE_CEC ((uint32_t) ((HAL_SYSCFG_ITLINE30 << 0x18) | SYSCFG_ITLINE30_SR_CEC)) /* CEC Interrupt -> exti[27] */
+#define HAL_ITLINE_USART3 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART3_GLB)) /*!< USART3 Interrupt .... */
+#define HAL_ITLINE_USART4 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART4_GLB)) /*!< USART4 Interrupt .... */
+#define HAL_ITLINE_USART5 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART5_GLB)) /*!< USART5 Interrupt .... */
+#define HAL_ITLINE_USART6 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART6_GLB)) /*!< USART6 Interrupt .... */
+#define HAL_ITLINE_USART7 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART7_GLB)) /*!< USART7 Interrupt .... */
+#define HAL_ITLINE_USART8 ((uint32_t) ((HAL_SYSCFG_ITLINE29 << 0x18) | SYSCFG_ITLINE29_SR_USART8_GLB)) /*!< USART8 Interrupt .... */
+#define HAL_ITLINE_CAN ((uint32_t) ((HAL_SYSCFG_ITLINE30 << 0x18) | SYSCFG_ITLINE30_SR_CAN)) /*!< CAN Interrupt */
+#define HAL_ITLINE_CEC ((uint32_t) ((HAL_SYSCFG_ITLINE30 << 0x18) | SYSCFG_ITLINE30_SR_CEC)) /*!< CEC Interrupt -> exti[27] */
/**
* @}
*/
@@ -608,7 +605,8 @@
#if defined(STM32F091xC) || defined (STM32F098xx)
/** @defgroup HAL_ISR_wrapper_check HAL ISR wrapper check
* @brief ISR wrapper check
- * @note Allow to determine interrupt source per line.
+ * @note This feature is applicable on STM32F09x
+ * @note Allow to determine interrupt source per line.
* @{
*/
#define __HAL_GET_PENDING_IT(__SOURCE__) (SYSCFG->IT_LINE_SR[((__SOURCE__) >> 0x18)] & ((__SOURCE__) & 0x00FFFFFF))
@@ -620,6 +618,7 @@
#if defined(STM32F091xC) || defined (STM32F098xx)
/** @defgroup HAL_SYSCFG_IRDA_modulation_envelope_selection HAL SYSCFG IRDA modulation envelope selection
* @brief selection of the modulation envelope signal macro, using bits [7:6] of SYS_CTRL(CFGR1) register
+ * @note This feature is applicable on STM32F09x
* @param __SOURCE__: This parameter can be a value of @ref HAL_IRDA_ENV_SEL
* @{
*/
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_adc.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_adc.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_adc.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file containing functions prototypes of ADC HAL library.
******************************************************************************
* @attention
@@ -66,7 +66,7 @@
* - For all parameters: ADC disabled (this is the only possible ADC state to modify parameter 'ClockPrescaler')
* - For all parameters except 'ClockPrescaler': ADC enabled without conversion on going on regular group.
* If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed
- * without error reporting without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly).
+ * without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly).
*/
typedef struct
{
@@ -726,7 +726,7 @@
/**
* @brief Enable ADC discontinuous conversion mode for regular group
- * @param _REG_DISCONTINUOUS_MODE_: Regulat discontinuous mode.
+ * @param _REG_DISCONTINUOUS_MODE_: Regular discontinuous mode.
* @retval None
*/
#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS(_REG_DISCONTINUOUS_MODE_) ((_REG_DISCONTINUOUS_MODE_) << 16)
@@ -781,14 +781,7 @@
* @retval None
*/
#define __HAL_ADC_CFGR1_DMACONTREQ(_DMACONTREQ_MODE_) ((_DMACONTREQ_MODE_) << 1)
-
-/**
- * @brief Configure the channel number into offset OFRx register
- * @param _CHANNEL_: ADC Channel
- * @retval None
- */
-#define __HAL_ADC_OFR_CHANNEL(_CHANNEL_) ((_CHANNEL_) << 26)
-
+
/**
* @brief Configure the analog watchdog high threshold into register TR.
* @param _Threshold_: Threshold value
@@ -810,7 +803,7 @@
*/
#define __HAL_ADC_ENABLING_CONDITIONS(__HANDLE__) \
(( ( ((__HANDLE__)->Instance->CR) & \
- (ADC_CR_ADCAL | ADC_CR_ADSTP | \
+ (ADC_CR_ADCAL | ADC_CR_ADSTP | \
ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN ) \
) == RESET \
) ? SET : RESET)
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_adc_ex.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_adc_ex.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_adc_ex.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of ADC HAL Extension module. ****************************************************************************** * @attention
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_can.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_can.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_can.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of CAN HAL module.
******************************************************************************
* @attention
@@ -43,7 +43,7 @@
extern "C" {
#endif
-#if defined(STM32F072xB) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F072xB) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
@@ -77,23 +77,6 @@
}HAL_CAN_StateTypeDef;
/**
- * @brief HAL CAN Error Code structure definition
- */
-typedef enum
-{
- HAL_CAN_ERROR_NONE = 0x00, /*!< No error */
- HAL_CAN_ERROR_EWG = 0x01, /*!< EWG error */
- HAL_CAN_ERROR_EPV = 0x02, /*!< EPV error */
- HAL_CAN_ERROR_BOF = 0x04, /*!< BOF error */
- HAL_CAN_ERROR_STF = 0x08, /*!< Stuff error */
- HAL_CAN_ERROR_FOR = 0x10, /*!< Form error */
- HAL_CAN_ERROR_ACK = 0x20, /*!< Acknowledgment error */
- HAL_CAN_ERROR_BR = 0x40, /*!< Bit recessive */
- HAL_CAN_ERROR_BD = 0x80, /*!< LEC dominant */
- HAL_CAN_ERROR_CRC = 0x100 /*!< LEC transfer error */
-}HAL_CAN_ErrorTypeDef;
-
-/**
* @brief CAN init structure definition
*/
typedef struct
@@ -250,7 +233,8 @@
__IO HAL_CAN_StateTypeDef State; /*!< CAN communication state */
- __IO HAL_CAN_ErrorTypeDef ErrorCode; /*!< CAN Error code */
+ __IO uint32_t ErrorCode; /*!< CAN Error code
+ This parameter can be a value of @ref CAN_Error */
}CAN_HandleTypeDef;
/**
@@ -263,6 +247,23 @@
* @{
*/
+/** @defgroup CAN_Error CAN Error
+ * @{
+ */
+#define HAL_CAN_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_CAN_ERROR_EWG ((uint32_t)0x00000001) /*!< EWG error */
+#define HAL_CAN_ERROR_EPV ((uint32_t)0x00000002) /*!< EPV error */
+#define HAL_CAN_ERROR_BOF ((uint32_t)0x00000004) /*!< BOF error */
+#define HAL_CAN_ERROR_STF ((uint32_t)0x00000008) /*!< Stuff error */
+#define HAL_CAN_ERROR_FOR ((uint32_t)0x00000010) /*!< Form error */
+#define HAL_CAN_ERROR_ACK ((uint32_t)0x00000020) /*!< Acknowledgment error */
+#define HAL_CAN_ERROR_BR ((uint32_t)0x00000040) /*!< Bit recessive */
+#define HAL_CAN_ERROR_BD ((uint32_t)0x00000080) /*!< LEC dominant */
+#define HAL_CAN_ERROR_CRC ((uint32_t)0x00000100) /*!< LEC transfer error */
+/**
+ * @}
+ */
+
/** @defgroup CAN_InitStatus CAN InitStatus
* @{
*/
@@ -796,7 +797,7 @@
* @}
*/
-#endif /* STM32F072xB || STM32F042x6 || STM32F048xx || STM32F091xC || STM32F098xx */
+#endif /* STM32F072xB || STM32F042x6 || STM32F048xx || STM32F078xx || STM32F091xC || STM32F098xx */
#ifdef __cplusplus
}
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_cec.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_cec.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_cec.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of CEC HAL module. ****************************************************************************** * @attention @@ -178,8 +178,8 @@ uint16_t RxXferSize; /* CEC Rx Transfer size, 0: header received only */ - uint32_t ErrorCode; /* For errors handling purposes, copy of ISR register - in case error is reported */ + __IO uint32_t ErrorCode; /* For errors handling purposes, copy of ISR register + in case error is reported */ HAL_LockTypeDef Lock; /* Locking object */
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_comp.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_comp.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_comp.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of COMP HAL module.
******************************************************************************
* @attention
@@ -97,18 +97,6 @@
}COMP_InitTypeDef;
/**
- * @brief HAL State structures definition
- */
-typedef enum
-{
- HAL_COMP_STATE_RESET = 0x00, /*!< COMP not yet initialized or disabled */
- HAL_COMP_STATE_READY = 0x01, /*!< COMP initialized and ready for use */
- HAL_COMP_STATE_READY_LOCKED = 0x11, /*!< COMP initialized but the configuration is locked */
- HAL_COMP_STATE_BUSY = 0x02, /*!< COMP is running */
- HAL_COMP_STATE_BUSY_LOCKED = 0x12 /*!< COMP is running and the configuration is locked */
-}HAL_COMP_StateTypeDef;
-
-/**
* @brief COMP Handle Structure definition
*/
typedef struct
@@ -116,7 +104,8 @@
COMP_TypeDef *Instance; /*!< Register base address */
COMP_InitTypeDef Init; /*!< COMP required parameters */
HAL_LockTypeDef Lock; /*!< Locking object */
- __IO HAL_COMP_StateTypeDef State; /*!< COMP communication state */
+ __IO uint32_t State; /*!< COMP communication state
+ This parameter can be a value of @ref COMP_State */
}COMP_HandleTypeDef;
/**
@@ -128,6 +117,18 @@
* @{
*/
+/** @defgroup COMP_State COMP State
+ * @{
+ */
+#define HAL_COMP_STATE_RESET ((uint32_t)0x00000000) /*!< COMP not yet initialized or disabled */
+#define HAL_COMP_STATE_READY ((uint32_t)0x00000001) /*!< COMP initialized and ready for use */
+#define HAL_COMP_STATE_READY_LOCKED ((uint32_t)0x00000011) /*!< COMP initialized but the configuration is locked */
+#define HAL_COMP_STATE_BUSY ((uint32_t)0x00000002) /*!< COMP is running */
+#define HAL_COMP_STATE_BUSY_LOCKED ((uint32_t)0x00000012) /*!< COMP is running and the configuration is locked */
+/**
+ * @}
+ */
+
/** @defgroup COMP_OutputPolarity COMP OutputPolarity
* @{
*/
@@ -447,7 +448,7 @@
* @{
*/
/* Peripheral State and Error functions ***************************************/
-HAL_COMP_StateTypeDef HAL_COMP_GetState(COMP_HandleTypeDef *hcomp);
+uint32_t HAL_COMP_GetState(COMP_HandleTypeDef *hcomp);
/**
* @}
*/
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_conf.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_conf.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_conf_template.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief HAL configuration file. ****************************************************************************** * @attention
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_cortex.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_cortex.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_cortex.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of CORTEX HAL module. ****************************************************************************** * @attention
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_crc.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_crc.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_crc.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of CRC HAL module.
******************************************************************************
* @attention
@@ -92,7 +92,7 @@
e.g., for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65.
No need to specify it if DefaultPolynomialUse is set to DEFAULT_POLYNOMIAL_ENABLE */
- uint32_t CRCLength; /*!< This parameter is a value of @ref CRCEx_Polynomial_Size_Definitions and indicates CRC length.
+ uint32_t CRCLength; /*!< This parameter is a value of @ref CRCEx_Polynomial_Sizes and indicates CRC length.
Value can be either one of
CRC_POLYLENGTH_32B (32-bit CRC)
CRC_POLYLENGTH_16B (16-bit CRC)
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_crc_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_crc_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_crc_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of CRC HAL extension module.
******************************************************************************
* @attention
@@ -87,10 +87,10 @@
* @}
*/
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
/** @defgroup CRCEx_Polynomial_Sizes Polynomial sizes to configure the IP
* @{
*/
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
#define CRC_POLYLENGTH_32B ((uint32_t)0x00000000)
#define CRC_POLYLENGTH_16B ((uint32_t)CRC_CR_POLYSIZE_0)
#define CRC_POLYLENGTH_8B ((uint32_t)CRC_CR_POLYSIZE_1)
@@ -99,6 +99,10 @@
((LENGTH) == CRC_POLYLENGTH_16B) || \
((LENGTH) == CRC_POLYLENGTH_8B) || \
((LENGTH) == CRC_POLYLENGTH_7B))
+#else
+#define CRC_POLYLENGTH_32B ((uint32_t)0x00000000)
+#define IS_CRC_POL_LENGTH(LENGTH) ((LENGTH) == CRC_POLYLENGTH_32B)
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
/**
* @}
*/
@@ -106,14 +110,18 @@
/** @defgroup CRCEx_Polynomial_Size_Definitions CRC polynomial possible sizes actual definitions
* @{
*/
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
#define HAL_CRC_LENGTH_32B 32
#define HAL_CRC_LENGTH_16B 16
#define HAL_CRC_LENGTH_8B 8
#define HAL_CRC_LENGTH_7B 7
+#else
+#define HAL_CRC_LENGTH_32B 32
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
/**
* @}
*/
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+
/**
* @}
*/
@@ -137,7 +145,7 @@
*/
#define __HAL_CRC_OUTPUTREVERSAL_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(CRC_CR_REV_OUT))
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/**
* @brief Set CRC non-default polynomial
* @param __HANDLE__ : CRC handle
@@ -145,7 +153,7 @@
* @retval None.
*/
#define __HAL_CRC_POLYNOMIAL_CONFIG(__HANDLE__, __POLYNOMIAL__) ((__HANDLE__)->Instance->POL = (__POLYNOMIAL__))
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/**
* @}
*/
@@ -165,9 +173,9 @@
HAL_StatusTypeDef HAL_CRCEx_Input_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t InputReverseMode);
HAL_StatusTypeDef HAL_CRCEx_Output_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t OutputReverseMode);
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
HAL_StatusTypeDef HAL_CRCEx_Polynomial_Set(CRC_HandleTypeDef *hcrc, uint32_t Pol, uint32_t PolyLength);
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/**
* @}
*/
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_dac.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_dac.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_dac.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of DAC HAL module. ****************************************************************************** * @attention
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_dac_ex.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_dac_ex.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_dac_ex.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of DAC HAL Extension module. ****************************************************************************** * @attention
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_def.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_def.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_def.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief This file contains HAL common defines, enumeration, macros and
* structures definitions.
******************************************************************************
@@ -70,8 +70,8 @@
} HAL_LockTypeDef;
/* Exported macro ------------------------------------------------------------*/
-#ifndef HAL_NULL
- #define HAL_NULL (void *) 0
+#ifndef NULL
+ #define NULL 0
#endif
#define HAL_MAX_DELAY 0xFFFFFFFF
@@ -85,6 +85,8 @@
(__DMA_HANDLE_).Parent = (__HANDLE__); \
} while(0)
+#define UNUSED(x) ((void)(x))
+
/** @brief Reset the Handle's State field.
* @param __HANDLE__: specifies the Peripheral Handle.
* @note This macro can be used for the following purpose:
@@ -154,6 +156,23 @@
#endif /* __ALIGN_BEGIN */
#endif /* __GNUC__ */
+/**
+ * @brief __NOINLINE definition
+ */
+#if defined ( __CC_ARM ) || defined ( __GNUC__ )
+/* ARM & GNUCompiler
+ ----------------
+*/
+#define __NOINLINE __attribute__ ( (noinline) )
+
+#elif defined ( __ICCARM__ )
+/* ICCARM Compiler
+ ---------------
+*/
+#define __NOINLINE _Pragma("optimize = no_inline")
+
+#endif
+
#ifdef __cplusplus
}
#endif
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_dma.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_dma.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_dma.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of DMA HAL module.
******************************************************************************
* @attention
@@ -288,34 +288,34 @@
* @{
*/
-#define DMA_FLAG_GL1 ((uint32_t)0x00000001)
-#define DMA_FLAG_TC1 ((uint32_t)0x00000002)
-#define DMA_FLAG_HT1 ((uint32_t)0x00000004)
-#define DMA_FLAG_TE1 ((uint32_t)0x00000008)
-#define DMA_FLAG_GL2 ((uint32_t)0x00000010)
-#define DMA_FLAG_TC2 ((uint32_t)0x00000020)
-#define DMA_FLAG_HT2 ((uint32_t)0x00000040)
-#define DMA_FLAG_TE2 ((uint32_t)0x00000080)
-#define DMA_FLAG_GL3 ((uint32_t)0x00000100)
-#define DMA_FLAG_TC3 ((uint32_t)0x00000200)
-#define DMA_FLAG_HT3 ((uint32_t)0x00000400)
-#define DMA_FLAG_TE3 ((uint32_t)0x00000800)
-#define DMA_FLAG_GL4 ((uint32_t)0x00001000)
-#define DMA_FLAG_TC4 ((uint32_t)0x00002000)
-#define DMA_FLAG_HT4 ((uint32_t)0x00004000)
-#define DMA_FLAG_TE4 ((uint32_t)0x00008000)
-#define DMA_FLAG_GL5 ((uint32_t)0x00010000)
-#define DMA_FLAG_TC5 ((uint32_t)0x00020000)
-#define DMA_FLAG_HT5 ((uint32_t)0x00040000)
-#define DMA_FLAG_TE5 ((uint32_t)0x00080000)
-#define DMA_FLAG_GL6 ((uint32_t)0x00100000)
-#define DMA_FLAG_TC6 ((uint32_t)0x00200000)
-#define DMA_FLAG_HT6 ((uint32_t)0x00400000)
-#define DMA_FLAG_TE6 ((uint32_t)0x00800000)
-#define DMA_FLAG_GL7 ((uint32_t)0x01000000)
-#define DMA_FLAG_TC7 ((uint32_t)0x02000000)
-#define DMA_FLAG_HT7 ((uint32_t)0x04000000)
-#define DMA_FLAG_TE7 ((uint32_t)0x08000000)
+#define DMA_FLAG_GL1 ((uint32_t)0x00000001) /*!< Channel 1 global interrupt flag */
+#define DMA_FLAG_TC1 ((uint32_t)0x00000002) /*!< Channel 1 transfer complete flag */
+#define DMA_FLAG_HT1 ((uint32_t)0x00000004) /*!< Channel 1 half transfer flag */
+#define DMA_FLAG_TE1 ((uint32_t)0x00000008) /*!< Channel 1 transfer error flag */
+#define DMA_FLAG_GL2 ((uint32_t)0x00000010) /*!< Channel 2 global interrupt flag */
+#define DMA_FLAG_TC2 ((uint32_t)0x00000020) /*!< Channel 2 transfer complete flag */
+#define DMA_FLAG_HT2 ((uint32_t)0x00000040) /*!< Channel 2 half transfer flag */
+#define DMA_FLAG_TE2 ((uint32_t)0x00000080) /*!< Channel 2 transfer error flag */
+#define DMA_FLAG_GL3 ((uint32_t)0x00000100) /*!< Channel 3 global interrupt flag */
+#define DMA_FLAG_TC3 ((uint32_t)0x00000200) /*!< Channel 3 transfer complete flag */
+#define DMA_FLAG_HT3 ((uint32_t)0x00000400) /*!< Channel 3 half transfer flag */
+#define DMA_FLAG_TE3 ((uint32_t)0x00000800) /*!< Channel 3 transfer error flag */
+#define DMA_FLAG_GL4 ((uint32_t)0x00001000) /*!< Channel 4 global interrupt flag */
+#define DMA_FLAG_TC4 ((uint32_t)0x00002000) /*!< Channel 4 transfer complete flag */
+#define DMA_FLAG_HT4 ((uint32_t)0x00004000) /*!< Channel 4 half transfer flag */
+#define DMA_FLAG_TE4 ((uint32_t)0x00008000) /*!< Channel 4 transfer error flag */
+#define DMA_FLAG_GL5 ((uint32_t)0x00010000) /*!< Channel 5 global interrupt flag */
+#define DMA_FLAG_TC5 ((uint32_t)0x00020000) /*!< Channel 5 transfer complete flag */
+#define DMA_FLAG_HT5 ((uint32_t)0x00040000) /*!< Channel 5 half transfer flag */
+#define DMA_FLAG_TE5 ((uint32_t)0x00080000) /*!< Channel 5 transfer error flag */
+#define DMA_FLAG_GL6 ((uint32_t)0x00100000) /*!< Channel 6 global interrupt flag */
+#define DMA_FLAG_TC6 ((uint32_t)0x00200000) /*!< Channel 6 transfer complete flag */
+#define DMA_FLAG_HT6 ((uint32_t)0x00400000) /*!< Channel 6 half transfer flag */
+#define DMA_FLAG_TE6 ((uint32_t)0x00800000) /*!< Channel 6 transfer error flag */
+#define DMA_FLAG_GL7 ((uint32_t)0x01000000) /*!< Channel 7 global interrupt flag */
+#define DMA_FLAG_TC7 ((uint32_t)0x02000000) /*!< Channel 7 transfer complete flag */
+#define DMA_FLAG_HT7 ((uint32_t)0x04000000) /*!< Channel 7 half transfer flag */
+#define DMA_FLAG_TE7 ((uint32_t)0x08000000) /*!< Channel 7 transfer error flag */
/**
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_dma_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_dma_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_dma_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of DMA HAL Extension module.
******************************************************************************
* @attention
@@ -56,201 +56,229 @@
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
-#if defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
/** @defgroup DMAEx_Exported_Constants DMAEx Exported Constants
* @{
*/
-#define DMA1_CHANNEL1_RMP 0x00000000
-#define DMA1_CHANNEL2_RMP 0x10000000
-#define DMA1_CHANNEL3_RMP 0x20000000
-#define DMA1_CHANNEL4_RMP 0x30000000
-#define DMA1_CHANNEL5_RMP 0x40000000
-#define DMA1_CHANNEL6_RMP 0x50000000
-#define DMA1_CHANNEL7_RMP 0x60000000
-#define DMA2_CHANNEL1_RMP 0x00000000
-#define DMA2_CHANNEL2_RMP 0x10000000
-#define DMA2_CHANNEL3_RMP 0x20000000
-#define DMA2_CHANNEL4_RMP 0x30000000
-#define DMA2_CHANNEL5_RMP 0x40000000
+#define DMA1_CHANNEL1_RMP 0x00000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL2_RMP 0x10000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL3_RMP 0x20000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL4_RMP 0x30000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL5_RMP 0x40000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#if !defined(STM32F030xC)
+#define DMA1_CHANNEL6_RMP 0x50000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA1_CHANNEL7_RMP 0x60000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL1_RMP 0x00000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL2_RMP 0x10000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL3_RMP 0x20000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL4_RMP 0x30000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#define DMA2_CHANNEL5_RMP 0x40000000 /*!< Internal define for remaping on STM32F09x/30xC */
+#endif /* !defined(STM32F030xC) */
/****************** DMA1 remap bit field definition********************/
/* DMA1 - Channel 1 */
-#define HAL_DMA1_CH1_DEFAULT (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMA1 */
-#define HAL_DMA1_CH1_ADC (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_ADC) /*!< Remap ADC on DMA1 Channel 1*/
-#define HAL_DMA1_CH1_TIM17_CH1 (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 1 */
-#define HAL_DMA1_CH1_TIM17_UP (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 1 */
-#define HAL_DMA1_CH1_USART1_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 1 */
-#define HAL_DMA1_CH1_USART2_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 1 */
-#define HAL_DMA1_CH1_USART3_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 1 */
-#define HAL_DMA1_CH1_USART4_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 1 */
-#define HAL_DMA1_CH1_USART5_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 1 */
-#define HAL_DMA1_CH1_USART6_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 1 */
-#define HAL_DMA1_CH1_USART7_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 1 */
-#define HAL_DMA1_CH1_USART8_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA_RMPCR1_CH1_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_DEFAULT (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH1_ADC (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_ADC) /*!< Remap ADC on DMA1 Channel 1*/
+#define HAL_DMA1_CH1_TIM17_CH1 (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 1 */
+#define HAL_DMA1_CH1_TIM17_UP (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART1_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART2_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART3_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART4_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART5_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART6_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 1 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH1_USART7_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 1 */
+#define HAL_DMA1_CH1_USART8_RX (uint32_t) (DMA1_CHANNEL1_RMP | DMA1_CSELR_CH1_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 1 */
+#endif /* !defined(STM32F030xC) */
+
/* DMA1 - Channel 2 */
-#define HAL_DMA1_CH2_DEFAULT (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMA1 */
-#define HAL_DMA1_CH2_ADC (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_ADC) /*!< Remap ADC on DMA1 channel 2 */
-#define HAL_DMA1_CH2_I2C1_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 2 */
-#define HAL_DMA1_CH2_SPI1_RX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_SPI1_RX) /*!< Remap SPI1 Rx on DMA1 channel 2 */
-#define HAL_DMA1_CH2_TIM1_CH1 (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_TIM1_CH1) /*!< Remap TIM1 channel 1 on DMA1 channel 2 */
-#define HAL_DMA1_CH2_TIM17_CH1 (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 2 */
-#define HAL_DMA1_CH2_TIM17_UP (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 2 */
-#define HAL_DMA1_CH2_USART1_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 2 */
-#define HAL_DMA1_CH2_USART2_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 2 */
-#define HAL_DMA1_CH2_USART3_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 2 */
-#define HAL_DMA1_CH2_USART4_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 2 */
-#define HAL_DMA1_CH2_USART5_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 2 */
-#define HAL_DMA1_CH2_USART6_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 2 */
-#define HAL_DMA1_CH2_USART7_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 2 */
-#define HAL_DMA1_CH2_USART8_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA_RMPCR1_CH2_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_DEFAULT (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH2_ADC (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_ADC) /*!< Remap ADC on DMA1 channel 2 */
+#define HAL_DMA1_CH2_I2C1_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_SPI1_RX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_SPI1_RX) /*!< Remap SPI1 Rx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_TIM1_CH1 (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM1_CH1) /*!< Remap TIM1 channel 1 on DMA1 channel 2 */
+#define HAL_DMA1_CH2_TIM17_CH1 (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 2 */
+#define HAL_DMA1_CH2_TIM17_UP (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART1_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART2_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART3_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART4_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART5_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART6_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 2 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH2_USART7_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 2 */
+#define HAL_DMA1_CH2_USART8_TX (uint32_t) (DMA1_CHANNEL2_RMP | DMA1_CSELR_CH2_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 2 */
+#endif /* !defined(STM32F030xC) */
+
/* DMA1 - Channel 3 */
-#define HAL_DMA1_CH3_DEFAULT (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMA1 */
-#define HAL_DMA1_CH3_TIM6_UP (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA1 channel 3 */
-#define HAL_DMA1_CH3_DAC_CH1 (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_DAC_CH1) /*!< Remap DAC Channel 1on DMA1 channel 3 */
-#define HAL_DMA1_CH3_I2C1_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 3 */
-#define HAL_DMA1_CH3_SPI1_TX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_SPI1_TX) /*!< Remap SPI1 Tx on DMA1 channel 3 */
-#define HAL_DMA1_CH3_TIM1_CH2 (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_TIM1_CH2) /*!< Remap TIM1 channel 2 on DMA1 channel 3 */
-#define HAL_DMA1_CH3_TIM2_CH2 (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_TIM2_CH2) /*!< Remap TIM2 channel 2 on DMA1 channel 3 */
-#define HAL_DMA1_CH3_TIM16_CH1 (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 3 */
-#define HAL_DMA1_CH3_TIM16_UP (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 3 */
-#define HAL_DMA1_CH3_USART1_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 3 */
-#define HAL_DMA1_CH3_USART2_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 3 */
-#define HAL_DMA1_CH3_USART3_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 3 */
-#define HAL_DMA1_CH3_USART4_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 3 */
-#define HAL_DMA1_CH3_USART5_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 3 */
-#define HAL_DMA1_CH3_USART6_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 3 */
-#define HAL_DMA1_CH3_USART7_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 3 */
-#define HAL_DMA1_CH3_USART8_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA_RMPCR1_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_DEFAULT (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH3_TIM6_UP (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA1 channel 3 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH3_DAC_CH1 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_DAC_CH1) /*!< Remap DAC Channel 1on DMA1 channel 3 */
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH3_I2C1_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_SPI1_TX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_SPI1_TX) /*!< Remap SPI1 Tx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_TIM1_CH2 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM1_CH2) /*!< Remap TIM1 channel 2 on DMA1 channel 3 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH3_TIM2_CH2 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM2_CH2) /*!< Remap TIM2 channel 2 on DMA1 channel 3 */
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH3_TIM16_CH1 (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 3 */
+#define HAL_DMA1_CH3_TIM16_UP (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART1_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART2_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART3_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART4_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART5_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART6_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 3 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH3_USART7_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 3 */
+#define HAL_DMA1_CH3_USART8_RX (uint32_t) (DMA1_CHANNEL3_RMP | DMA1_CSELR_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 3 */
+#endif /* !defined(STM32F030xC) */
+
/* DMA1 - Channel 4 */
-#define HAL_DMA1_CH4_DEFAULT (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMA1 */
-#define HAL_DMA1_CH4_TIM7_UP (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA1 channel 4 */
-#define HAL_DMA1_CH4_DAC_CH2 (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_DAC_CH2) /*!< Remap DAC Channel 2 on DMA1 channel 4 */
-#define HAL_DMA1_CH4_I2C2_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_I2C2_TX) /*!< Remap I2C2 Tx on DMA1 channel 4 */
-#define HAL_DMA1_CH4_SPI2_RX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 4 */
-#define HAL_DMA1_CH4_TIM2_CH4 (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_TIM2_CH4) /*!< Remap TIM2 channel 4 on DMA1 channel 4 */
-#define HAL_DMA1_CH4_TIM3_CH1 (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_TIM3_CH1) /*!< Remap TIM3 channel 1 on DMA1 channel 4 */
-#define HAL_DMA1_CH4_TIM3_TRIG (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 4 */
-#define HAL_DMA1_CH4_TIM16_CH1 (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 4 */
-#define HAL_DMA1_CH4_TIM16_UP (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 4 */
-#define HAL_DMA1_CH4_USART1_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 4 */
-#define HAL_DMA1_CH4_USART2_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 4 */
-#define HAL_DMA1_CH4_USART3_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 4 */
-#define HAL_DMA1_CH4_USART4_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 4 */
-#define HAL_DMA1_CH4_USART5_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 4 */
-#define HAL_DMA1_CH4_USART6_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 4 */
-#define HAL_DMA1_CH4_USART7_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 4 */
-#define HAL_DMA1_CH4_USART8_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA_RMPCR1_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_DEFAULT (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH4_TIM7_UP (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA1 channel 4 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH4_DAC_CH2 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_DAC_CH2) /*!< Remap DAC Channel 2 on DMA1 channel 4 */
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH4_I2C2_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_I2C2_TX) /*!< Remap I2C2 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_SPI2_RX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 4 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH4_TIM2_CH4 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM2_CH4) /*!< Remap TIM2 channel 4 on DMA1 channel 4 */
+#endif /* !defined(STM32F030xC) */
+#define HAL_DMA1_CH4_TIM3_CH1 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM3_CH1) /*!< Remap TIM3 channel 1 on DMA1 channel 4 */
+#define HAL_DMA1_CH4_TIM3_TRIG (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 4 */
+#define HAL_DMA1_CH4_TIM16_CH1 (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 4 */
+#define HAL_DMA1_CH4_TIM16_UP (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART1_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART2_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART3_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART4_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART5_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART6_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 4 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH4_USART7_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 4 */
+#define HAL_DMA1_CH4_USART8_TX (uint32_t) (DMA1_CHANNEL4_RMP | DMA1_CSELR_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 4 */
+#endif /* !defined(STM32F030xC) */
+
/* DMA1 - Channel 5 */
-#define HAL_DMA1_CH5_DEFAULT (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMA1 */
-#define HAL_DMA1_CH5_I2C2_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_I2C2_RX) /*!< Remap I2C2 Rx on DMA1 channel 5 */
-#define HAL_DMA1_CH5_SPI2_TX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_SPI2_TX) /*!< Remap SPI1 Tx on DMA1 channel 5 */
-#define HAL_DMA1_CH5_TIM1_CH3 (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_TIM1_CH3) /*!< Remap TIM1 channel 3 on DMA1 channel 5 */
-#define HAL_DMA1_CH5_USART1_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 5 */
-#define HAL_DMA1_CH5_USART2_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 5 */
-#define HAL_DMA1_CH5_USART3_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 5 */
-#define HAL_DMA1_CH5_USART4_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 5 */
-#define HAL_DMA1_CH5_USART5_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 5 */
-#define HAL_DMA1_CH5_USART6_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 5 */
-#define HAL_DMA1_CH5_USART7_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 5 */
-#define HAL_DMA1_CH5_USART8_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA_RMPCR1_CH5_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_DEFAULT (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH5_I2C2_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_I2C2_RX) /*!< Remap I2C2 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_SPI2_TX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_SPI2_TX) /*!< Remap SPI1 Tx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_TIM1_CH3 (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_TIM1_CH3) /*!< Remap TIM1 channel 3 on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART1_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART2_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART3_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART4_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART5_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART6_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 5 */
+#if !defined(STM32F030xC)
+#define HAL_DMA1_CH5_USART7_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 5 */
+#define HAL_DMA1_CH5_USART8_RX (uint32_t) (DMA1_CHANNEL5_RMP | DMA1_CSELR_CH5_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 5 */
+#endif /* !defined(STM32F030xC) */
+
+#if !defined(STM32F030xC)
/* DMA1 - Channel 6 */
-#define HAL_DMA1_CH6_DEFAULT (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMA1 */
-#define HAL_DMA1_CH6_I2C1_TX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 6 */
-#define HAL_DMA1_CH6_SPI2_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 6 */
-#define HAL_DMA1_CH6_TIM1_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM1_CH1) /*!< Remap TIM1 channel 1 on DMA1 channel 6 */
-#define HAL_DMA1_CH6_TIM1_CH2 (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM1_CH2) /*!< Remap TIM1 channel 2 on DMA1 channel 6 */
-#define HAL_DMA1_CH6_TIM1_CH3 (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM1_CH3) /*!< Remap TIM1 channel 3 on DMA1 channel 6 */
-#define HAL_DMA1_CH6_TIM3_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM3_CH1) /*!< Remap TIM3 channel 1 on DMA1 channel 6 */
-#define HAL_DMA1_CH6_TIM3_TRIG (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 6 */
-#define HAL_DMA1_CH6_TIM16_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 6 */
-#define HAL_DMA1_CH6_TIM16_UP (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 6 */
-#define HAL_DMA1_CH6_USART1_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 6 */
-#define HAL_DMA1_CH6_USART2_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 6 */
-#define HAL_DMA1_CH6_USART3_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 6 */
-#define HAL_DMA1_CH6_USART4_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 6 */
-#define HAL_DMA1_CH6_USART5_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 6 */
-#define HAL_DMA1_CH6_USART6_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 6 */
-#define HAL_DMA1_CH6_USART7_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 6 */
-#define HAL_DMA1_CH6_USART8_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA_RMPCR1_CH6_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_DEFAULT (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH6_I2C1_TX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_I2C1_TX) /*!< Remap I2C1 Tx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_SPI2_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_SPI2_RX) /*!< Remap SPI2 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM1_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH1) /*!< Remap TIM1 channel 1 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM1_CH2 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH2) /*!< Remap TIM1 channel 2 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM1_CH3 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM1_CH3) /*!< Remap TIM1 channel 3 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM3_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM3_CH1) /*!< Remap TIM3 channel 1 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM3_TRIG (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM3_TRIG) /*!< Remap TIM3 Trig on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM16_CH1 (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM16_CH1) /*!< Remap TIM16 channel 1 on DMA1 channel 6 */
+#define HAL_DMA1_CH6_TIM16_UP (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_TIM16_UP) /*!< Remap TIM16 up on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART1_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART1_RX) /*!< Remap USART1 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART2_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART2_RX) /*!< Remap USART2 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART3_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART3_RX) /*!< Remap USART3 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART4_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART4_RX) /*!< Remap USART4 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART5_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART5_RX) /*!< Remap USART5 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART6_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART6_RX) /*!< Remap USART6 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART7_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART7_RX) /*!< Remap USART7 Rx on DMA1 channel 6 */
+#define HAL_DMA1_CH6_USART8_RX (uint32_t) (DMA1_CHANNEL6_RMP | DMA1_CSELR_CH6_USART8_RX) /*!< Remap USART8 Rx on DMA1 channel 6 */
/* DMA1 - Channel 7 */
-#define HAL_DMA1_CH7_DEFAULT (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_DEFAULT) /*!< Default remap position for DMA1 */
-#define HAL_DMA1_CH7_I2C1_RX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 7 */
-#define HAL_DMA1_CH7_SPI2_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_SPI2_TX) /*!< Remap SPI2 Tx on DMA1 channel 7 */
-#define HAL_DMA1_CH7_TIM2_CH2 (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_TIM2_CH2) /*!< Remap TIM2 channel 2 on DMA1 channel 7 */
-#define HAL_DMA1_CH7_TIM2_CH4 (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_TIM2_CH4) /*!< Remap TIM2 channel 4 on DMA1 channel 7 */
-#define HAL_DMA1_CH7_TIM17_CH1 (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 7 */
-#define HAL_DMA1_CH7_TIM17_UP (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 7 */
-#define HAL_DMA1_CH7_USART1_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 7 */
-#define HAL_DMA1_CH7_USART2_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 7 */
-#define HAL_DMA1_CH7_USART3_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 7 */
-#define HAL_DMA1_CH7_USART4_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 7 */
-#define HAL_DMA1_CH7_USART5_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 7 */
-#define HAL_DMA1_CH7_USART6_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 7 */
-#define HAL_DMA1_CH7_USART7_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 7 */
-#define HAL_DMA1_CH7_USART8_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA_RMPCR1_CH7_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_DEFAULT (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_DEFAULT) /*!< Default remap position for DMA1 */
+#define HAL_DMA1_CH7_I2C1_RX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_I2C1_RX) /*!< Remap I2C1 Rx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_SPI2_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_SPI2_TX) /*!< Remap SPI2 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_TIM2_CH2 (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM2_CH2) /*!< Remap TIM2 channel 2 on DMA1 channel 7 */
+#define HAL_DMA1_CH7_TIM2_CH4 (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM2_CH4) /*!< Remap TIM2 channel 4 on DMA1 channel 7 */
+#define HAL_DMA1_CH7_TIM17_CH1 (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM17_CH1) /*!< Remap TIM17 channel 1 on DMA1 channel 7 */
+#define HAL_DMA1_CH7_TIM17_UP (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_TIM17_UP) /*!< Remap TIM17 up on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART1_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART1_TX) /*!< Remap USART1 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART2_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART2_TX) /*!< Remap USART2 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART3_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART3_TX) /*!< Remap USART3 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART4_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART4_TX) /*!< Remap USART4 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART5_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART5_TX) /*!< Remap USART5 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART6_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART6_TX) /*!< Remap USART6 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART7_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART7_TX) /*!< Remap USART7 Tx on DMA1 channel 7 */
+#define HAL_DMA1_CH7_USART8_TX (uint32_t) (DMA1_CHANNEL7_RMP | DMA1_CSELR_CH7_USART8_TX) /*!< Remap USART8 Tx on DMA1 channel 7 */
/****************** DMA2 remap bit field definition********************/
/* DMA2 - Channel 1 */
-#define HAL_DMA2_CH1_DEFAULT (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_DEFAULT) /*!< Default remap position for DMA2 */
-#define HAL_DMA2_CH1_I2C2_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_CH1_I2C2_TX) /*!< Remap I2C2 TX on DMA2 channel 1 */
-#define HAL_DMA2_CH1_USART1_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 1 */
-#define HAL_DMA2_CH1_USART2_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 1 */
-#define HAL_DMA2_CH1_USART3_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 1 */
-#define HAL_DMA2_CH1_USART4_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 1 */
-#define HAL_DMA2_CH1_USART5_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 1 */
-#define HAL_DMA2_CH1_USART6_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 1 */
-#define HAL_DMA2_CH1_USART7_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 1 */
-#define HAL_DMA2_CH1_USART8_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA_RMPCR2_CH1_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_DEFAULT (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH1_I2C2_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_I2C2_TX) /*!< Remap I2C2 TX on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART1_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART2_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART3_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART4_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART5_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART6_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART7_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 1 */
+#define HAL_DMA2_CH1_USART8_TX (uint32_t) (DMA2_CHANNEL1_RMP | DMA2_CSELR_CH1_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 1 */
/* DMA2 - Channel 2 */
-#define HAL_DMA2_CH2_DEFAULT (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_DEFAULT) /*!< Default remap position for DMA2 */
-#define HAL_DMA2_CH2_I2C2_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_CH2_I2C2_RX) /*!< Remap I2C2 Rx on DMA2 channel 2 */
-#define HAL_DMA2_CH2_USART1_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 2 */
-#define HAL_DMA2_CH2_USART2_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 2 */
-#define HAL_DMA2_CH2_USART3_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 2 */
-#define HAL_DMA2_CH2_USART4_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 2 */
-#define HAL_DMA2_CH2_USART5_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 2 */
-#define HAL_DMA2_CH2_USART6_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 2 */
-#define HAL_DMA2_CH2_USART7_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 2 */
-#define HAL_DMA2_CH2_USART8_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA_RMPCR2_CH2_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_DEFAULT (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH2_I2C2_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_I2C2_RX) /*!< Remap I2C2 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART1_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART2_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART3_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART4_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART5_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART6_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART7_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 2 */
+#define HAL_DMA2_CH2_USART8_RX (uint32_t) (DMA2_CHANNEL2_RMP | DMA2_CSELR_CH2_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 2 */
/* DMA2 - Channel 3 */
-#define HAL_DMA2_CH3_DEFAULT (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_DEFAULT) /*!< Default remap position for DMA2 */
-#define HAL_DMA2_CH3_TIM6_UP (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA2 channel 3 */
-#define HAL_DMA2_CH3_DAC_CH1 (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_DAC_CH1) /*!< Remap DAC channel 1 on DMA2 channel 3 */
-#define HAL_DMA2_CH3_SPI1_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_SPI1_RX) /*!< Remap SPI1 Rx on DMA2 channel 3 */
-#define HAL_DMA2_CH3_USART1_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 3 */
-#define HAL_DMA2_CH3_USART2_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 3 */
-#define HAL_DMA2_CH3_USART3_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 3 */
-#define HAL_DMA2_CH3_USART4_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 3 */
-#define HAL_DMA2_CH3_USART5_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 3 */
-#define HAL_DMA2_CH3_USART6_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 3 */
-#define HAL_DMA2_CH3_USART7_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 3 */
-#define HAL_DMA2_CH3_USART8_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA_RMPCR2_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_DEFAULT (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH3_TIM6_UP (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_TIM6_UP) /*!< Remap TIM6 up on DMA2 channel 3 */
+#define HAL_DMA2_CH3_DAC_CH1 (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_DAC_CH1) /*!< Remap DAC channel 1 on DMA2 channel 3 */
+#define HAL_DMA2_CH3_SPI1_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_SPI1_RX) /*!< Remap SPI1 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART1_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART1_RX) /*!< Remap USART1 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART2_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART2_RX) /*!< Remap USART2 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART3_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART3_RX) /*!< Remap USART3 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART4_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART4_RX) /*!< Remap USART4 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART5_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART5_RX) /*!< Remap USART5 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART6_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART6_RX) /*!< Remap USART6 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART7_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART7_RX) /*!< Remap USART7 Rx on DMA2 channel 3 */
+#define HAL_DMA2_CH3_USART8_RX (uint32_t) (DMA2_CHANNEL3_RMP | DMA2_CSELR_CH3_USART8_RX) /*!< Remap USART8 Rx on DMA2 channel 3 */
/* DMA2 - Channel 4 */
-#define HAL_DMA2_CH4_DEFAULT (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_DEFAULT) /*!< Default remap position for DMA2 */
-#define HAL_DMA2_CH4_TIM7_UP (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA2 channel 4 */
-#define HAL_DMA2_CH4_DAC_CH2 (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_DAC_CH2) /*!< Remap DAC channel 2 on DMA2 channel 4 */
-#define HAL_DMA2_CH4_SPI1_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_SPI1_TX) /*!< Remap SPI1 Tx on DMA2 channel 4 */
-#define HAL_DMA2_CH4_USART1_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 4 */
-#define HAL_DMA2_CH4_USART2_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 4 */
-#define HAL_DMA2_CH4_USART3_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 4 */
-#define HAL_DMA2_CH4_USART4_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 4 */
-#define HAL_DMA2_CH4_USART5_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 4 */
-#define HAL_DMA2_CH4_USART6_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 4 */
-#define HAL_DMA2_CH4_USART7_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 4 */
-#define HAL_DMA2_CH4_USART8_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA_RMPCR2_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_DEFAULT (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH4_TIM7_UP (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_TIM7_UP) /*!< Remap TIM7 up on DMA2 channel 4 */
+#define HAL_DMA2_CH4_DAC_CH2 (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_DAC_CH2) /*!< Remap DAC channel 2 on DMA2 channel 4 */
+#define HAL_DMA2_CH4_SPI1_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_SPI1_TX) /*!< Remap SPI1 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART1_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART2_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART3_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART4_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART5_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART6_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART7_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 4 */
+#define HAL_DMA2_CH4_USART8_TX (uint32_t) (DMA2_CHANNEL4_RMP | DMA2_CSELR_CH4_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 4 */
/* DMA2 - Channel 5 */
-#define HAL_DMA2_CH5_DEFAULT (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_DEFAULT) /*!< Default remap position for DMA2 */
-#define HAL_DMA2_CH5_ADC (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_CH5_ADC) /*!< Remap ADC on DMA2 channel 5 */
-#define HAL_DMA2_CH5_USART1_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 5 */
-#define HAL_DMA2_CH5_USART2_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 5 */
-#define HAL_DMA2_CH5_USART3_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 5 */
-#define HAL_DMA2_CH5_USART4_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 5 */
-#define HAL_DMA2_CH5_USART5_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 5 */
-#define HAL_DMA2_CH5_USART6_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 5 */
-#define HAL_DMA2_CH5_USART7_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 5 */
-#define HAL_DMA2_CH5_USART8_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA_RMPCR2_CH5_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_DEFAULT (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_DEFAULT) /*!< Default remap position for DMA2 */
+#define HAL_DMA2_CH5_ADC (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_ADC) /*!< Remap ADC on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART1_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART1_TX) /*!< Remap USART1 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART2_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART2_TX) /*!< Remap USART2 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART3_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART3_TX) /*!< Remap USART3 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART4_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART4_TX) /*!< Remap USART4 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART5_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART5_TX) /*!< Remap USART5 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART6_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART6_TX) /*!< Remap USART6 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART7_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART7_TX) /*!< Remap USART7 Tx on DMA2 channel 5 */
+#define HAL_DMA2_CH5_USART8_TX (uint32_t) (DMA2_CHANNEL5_RMP | DMA2_CSELR_CH5_USART8_TX) /*!< Remap USART8 Tx on DMA2 channel 5 */
+#endif /* !defined(STM32F030xC) */
-#define IS_HAL_DMA1_REMAP(REQUEST) (((REQUEST) == HAL_DMA1_CH1_DEFAULT) ||\
+#if defined(STM32F091xC) || defined(STM32F098xx)
+#define IS_HAL_DMA1_REMAP(REQUEST) (((REQUEST) == HAL_DMA1_CH1_DEFAULT) ||\
((REQUEST) == HAL_DMA1_CH1_ADC) ||\
((REQUEST) == HAL_DMA1_CH1_TIM17_CH1) ||\
((REQUEST) == HAL_DMA1_CH1_TIM17_UP) ||\
@@ -413,10 +441,76 @@
((REQUEST) == HAL_DMA2_CH5_USART6_TX) ||\
((REQUEST) == HAL_DMA2_CH5_USART7_TX) ||\
((REQUEST) == HAL_DMA2_CH5_USART8_TX ))
+#endif /* STM32F091xC || STM32F098xx */
+
+#if defined(STM32F030xC)
+#define IS_HAL_DMA1_REMAP(REQUEST) (((REQUEST) == HAL_DMA1_CH1_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH1_ADC) ||\
+ ((REQUEST) == HAL_DMA1_CH1_TIM17_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH1_TIM17_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH1_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH2_ADC) ||\
+ ((REQUEST) == HAL_DMA1_CH2_I2C1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_SPI1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_TIM1_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH2_I2C1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_TIM17_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH2_TIM17_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH2_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM6_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH3_I2C1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_SPI1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM1_CH2) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM16_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH3_TIM16_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH3_USART6_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM7_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH4_I2C2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_SPI2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM3_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM3_TRIG) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM16_CH1) ||\
+ ((REQUEST) == HAL_DMA1_CH4_TIM16_UP) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART1_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART3_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART4_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART5_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH4_USART6_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_DEFAULT) ||\
+ ((REQUEST) == HAL_DMA1_CH5_I2C2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_SPI2_TX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_TIM1_CH3) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART1_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART2_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART3_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART4_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART5_RX) ||\
+ ((REQUEST) == HAL_DMA1_CH5_USART6_RX))
+#endif /* STM32F030xC */
+
/**
* @}
*/
-#endif /* STM32F091xC || STM32F098xx */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
/* Exported macros -----------------------------------------------------------*/
@@ -473,9 +567,9 @@
* @param __HANDLE__: DMA handle
* @param __FLAG__: Get the specified flag.
* This parameter can be any combination of the following values:
- * @arg DMA_FLAG_TCIFx: Transfer complete flag
- * @arg DMA_FLAG_HTIFx: Half transfer complete flag
- * @arg DMA_FLAG_TEIFx: Transfer error flag
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
* Where x can be 1_7 to select the DMA Channel flag.
* @retval The state of FLAG (SET or RESET).
*/
@@ -487,9 +581,9 @@
* @param __HANDLE__: DMA handle
* @param __FLAG__: specifies the flag to clear.
* This parameter can be any combination of the following values:
- * @arg DMA_FLAG_TCIFx: Transfer complete flag
- * @arg DMA_FLAG_HTIFx: Half transfer complete flag
- * @arg DMA_FLAG_TEIFx: Transfer error flag
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
* Where x can be 1_7 to select the DMA Channel flag.
* @retval None
*/
@@ -558,9 +652,9 @@
* @param __HANDLE__: DMA handle
* @param __FLAG__: Get the specified flag.
* This parameter can be any combination of the following values:
- * @arg DMA_FLAG_TCIFx: Transfer complete flag
- * @arg DMA_FLAG_HTIFx: Half transfer complete flag
- * @arg DMA_FLAG_TEIFx: Transfer error flag
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
* Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag.
* @retval The state of FLAG (SET or RESET).
*/
@@ -574,9 +668,9 @@
* @param __HANDLE__: DMA handle
* @param __FLAG__: specifies the flag to clear.
* This parameter can be any combination of the following values:
- * @arg DMA_FLAG_TCIFx: Transfer complete flag
- * @arg DMA_FLAG_HTIFx: Half transfer complete flag
- * @arg DMA_FLAG_TEIFx: Transfer error flag
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
* Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Channel flag.
* @retval None
*/
@@ -584,7 +678,7 @@
(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->IFCR = (__FLAG__)) :\
(DMA1->IFCR = (__FLAG__)))
-#else /* STM32F030x8_STM32F031x6_STM32F038xx_STM32F051x8_STM32F058xx Product devices */
+#else /* STM32F030x8_STM32F030xC_STM32F031x6_STM32F038xx_STM32F051x8_STM32F058xx_STM32F070x6_STM32F070xB Product devices */
/**
* @brief Returns the current DMA Channel transfer complete flag.
* @param __HANDLE__: DMA handle
@@ -626,9 +720,9 @@
* @param __HANDLE__: DMA handle
* @param __FLAG__: Get the specified flag.
* This parameter can be any combination of the following values:
- * @arg DMA_FLAG_TCIFx: Transfer complete flag
- * @arg DMA_FLAG_HTIFx: Half transfer complete flag
- * @arg DMA_FLAG_TEIFx: Transfer error flag
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
* Where x can be 1_5 to select the DMA Channel flag.
* @retval The state of FLAG (SET or RESET).
*/
@@ -640,9 +734,9 @@
* @param __HANDLE__: DMA handle
* @param __FLAG__: specifies the flag to clear.
* This parameter can be any combination of the following values:
- * @arg DMA_FLAG_TCIFx: Transfer complete flag
- * @arg DMA_FLAG_HTIFx: Half transfer complete flag
- * @arg DMA_FLAG_TEIFx: Transfer error flag
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
* Where x can be 1_5 to select the DMA Channel flag.
* @retval None
*/
@@ -651,20 +745,22 @@
#endif
-#if defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __HAL_DMA1_REMAP(__REQUEST__) \
do { assert_param(IS_HAL_DMA1_REMAP(__REQUEST__)); \
- DMA1->RMPCR &= ~((uint32_t)0x0F << (uint32_t)(((__REQUEST__) >> 28) * 4)); \
- DMA1->RMPCR |= (uint32_t)((__REQUEST__) & 0x0FFFFFFF); \
+ DMA1->CSELR &= ~((uint32_t)0x0F << (uint32_t)(((__REQUEST__) >> 28) * 4)); \
+ DMA1->CSELR |= (uint32_t)((__REQUEST__) & 0x0FFFFFFF); \
}while(0)
+#if defined(STM32F091xC) || defined(STM32F098xx)
#define __HAL_DMA2_REMAP(__REQUEST__) \
do { assert_param(IS_HAL_DMA2_REMAP(__REQUEST__)); \
- DMA2->RMPCR &= ~((uint32_t)0x0F << (uint32_t)(((__REQUEST__) >> 28) * 4)); \
- DMA2->RMPCR |= (uint32_t)((__REQUEST__) & 0x0FFFFFFF); \
+ DMA2->CSELR &= ~((uint32_t)0x0F << (uint32_t)(((__REQUEST__) >> 28) * 4)); \
+ DMA2->CSELR |= (uint32_t)((__REQUEST__) & 0x0FFFFFFF); \
}while(0)
+#endif /* STM32F091xC || STM32F098xx */
- #endif /* STM32F091xC || STM32F098xx */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
/**
* @}
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_flash.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_flash.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_flash.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of Flash HAL module.
******************************************************************************
* @attention
@@ -60,15 +60,6 @@
* @{
*/
-/**
- * @brief FLASH Error source
- */
-typedef enum
-{
- FLASH_ERROR_PG = 0x01,
- FLASH_ERROR_WRP = 0x02
-} FLASH_ErrorTypeDef;
-
/**
* @brief FLASH Erase structure definition
*/
@@ -134,17 +125,18 @@
*/
typedef struct
{
- __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /* Internal variable to indicate which procedure is ongoing or not in IT context */
+ __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*!< Internal variable to indicate which procedure is ongoing or not in IT context */
- __IO uint32_t DataRemaining; /* Internal variable to save the remaining pages to erase or half-word to program in IT context */
+ __IO uint32_t DataRemaining; /*!< Internal variable to save the remaining pages to erase or half-word to program in IT context */
- __IO uint32_t Address; /* Internal variable to save address selected for program or erase */
+ __IO uint32_t Address; /*!< Internal variable to save address selected for program or erase */
- __IO uint64_t Data; /* Internal variable to save data to be programmed */
+ __IO uint64_t Data; /*!< Internal variable to save data to be programmed */
- HAL_LockTypeDef Lock; /* FLASH locking object */
+ HAL_LockTypeDef Lock; /*!< FLASH locking object */
- __IO FLASH_ErrorTypeDef ErrorCode; /* FLASH error code */
+ __IO uint32_t ErrorCode; /*!< FLASH error code
+ This parameter can be a value of @ref FLASH_Error */
} FLASH_ProcessTypeDef;
@@ -158,6 +150,16 @@
* @{
*/
+/** @defgroup FLASH_Error FLASH Error
+ * @{
+ */
+#define FLASH_ERROR_NONE ((uint32_t)0x00000000)
+#define FLASH_ERROR_PG ((uint32_t)0x00000001)
+#define FLASH_ERROR_WRP ((uint32_t)0x00000002)
+/**
+ * @}
+ */
+
/** @defgroup FLASH_Type_Erase FLASH Type Erase
* @{
*/
@@ -204,7 +206,7 @@
#define OPTIONBYTE_USER ((uint32_t)0x04) /*!<USER option byte configuration*/
#define OPTIONBYTE_DATA ((uint32_t)0x08) /*!<DATA option byte configuration*/
-#define IS_OPTIONBYTE(VALUE) (((VALUE) < (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA)))
+#define IS_OPTIONBYTE(VALUE) ((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA))
/**
* @}
*/
@@ -485,7 +487,7 @@
* @{
*/
/* Peripheral State and Error functions ***************************************/
-FLASH_ErrorTypeDef HAL_FLASH_GetError(void);
+uint32_t HAL_FLASH_GetError(void);
/**
* @}
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_flash_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_flash_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_flash_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of FLASH HAL Extension module.
******************************************************************************
* @attention
@@ -62,21 +62,21 @@
/** @defgroup FLASHEx_Address FLASHEx Address
* @{
*/
-#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F038xx)
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F038xx) || defined(STM32F070x6)
#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x08007FFF))
-#endif /* STM32F030x6 || STM32F031x6 || STM32F042x6 || STM32F048xx || STM32F038xx */
+#endif /* STM32F030x6 || STM32F031x6 || STM32F042x6 || STM32F048xx || STM32F038xx || STM32F070x6 */
#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x0800FFFF))
#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x0801FFFF))
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB*/
-#if defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x0803FFFF))
-#endif /* STM32F091xC || STM32F098xx */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC*/
/**
* @}
*/
@@ -85,14 +85,14 @@
* @{
*/
#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || \
- defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx)
+ defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx) || defined(STM32F070x6)
#define FLASH_PAGE_SIZE 0x400
-#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F058xx */
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F058xx || STM32F070x6 */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define FLASH_PAGE_SIZE 0x800
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx || STM32F030xC */
/**
* @}
@@ -101,21 +101,21 @@
/** @defgroup FLASHEx_Nb_Pages FLASHEx Nb Pages
* @{
*/
-#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F038xx)
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F038xx)|| defined(STM32F070x6)
#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08007FFF)
-#endif /* STM32F030x6 || STM32F031x6 || STM32F042x6 || STM32F048xx || STM32F038xx */
+#endif /* STM32F030x6 || STM32F031x6 || STM32F042x6 || STM32F048xx || STM32F038xx || STM32F070x6 */
#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0800FFFF)
#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0801FFFF)
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB */
-#if defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0803FFFF)
-#endif /* STM32F091xC || STM32F098xx */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
/**
* @}
*/
@@ -124,7 +124,7 @@
* @{
*/
#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || \
- defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx)
+ defined(STM32F051x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F058xx) || defined(STM32F070x6)
#define OB_WRP_PAGES0TO3 ((uint32_t)0x00000001) /* Write protection of page 0 to 3 */
#define OB_WRP_PAGES4TO7 ((uint32_t)0x00000002) /* Write protection of page 4 to 7 */
#define OB_WRP_PAGES8TO11 ((uint32_t)0x00000004) /* Write protection of page 8 to 11 */
@@ -149,17 +149,17 @@
#define OB_WRP_PAGES32TO63MASK ((uint32_t)0x0000FF00)
#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
-#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F038xx)
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F038xx)|| defined(STM32F070x6)
#define OB_WRP_ALLPAGES ((uint32_t)0x000000FF) /*!< Write protection of all pages */
-#endif /* STM32F030x6 || STM32F031x6 || STM32F042x6 || STM32F048xx || STM32F038xx */
+#endif /* STM32F030x6 || STM32F031x6 || STM32F042x6 || STM32F048xx || STM32F038xx || STM32F070x6 */
#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
#define OB_WRP_ALLPAGES ((uint32_t)0x0000FFFF) /*!< Write protection of all pages */
#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
-#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F038xx || STM32F058xx */
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F051x8 || STM32F042x6 || STM32F048xx || STM32F038xx || STM32F058xx || STM32F070x6 */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define OB_WRP_PAGES0TO1 ((uint32_t)0x00000001) /* Write protection of page 0 to 1 */
#define OB_WRP_PAGES2TO3 ((uint32_t)0x00000002) /* Write protection of page 2 to 3 */
#define OB_WRP_PAGES4TO5 ((uint32_t)0x00000004) /* Write protection of page 4 to 5 */
@@ -191,32 +191,32 @@
#define OB_WRP_PAGES56TO57 ((uint32_t)0x10000000) /* Write protection of page 56 to 57 */
#define OB_WRP_PAGES58TO59 ((uint32_t)0x20000000) /* Write protection of page 58 to 59 */
#define OB_WRP_PAGES60TO61 ((uint32_t)0x40000000) /* Write protection of page 60 to 61 */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
#define OB_WRP_PAGES62TO63 ((uint32_t)0x80000000) /* Write protection of page 62 to 63 */
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx */
-#if defined(STM32F091xC) || defined(STM32F098xx)
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB */
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define OB_WRP_PAGES62TO127 ((uint32_t)0x80000000) /* Write protection of page 62 to 127 */
-#endif /* STM32F091xC || STM32F098xx */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
#define OB_WRP_PAGES0TO15MASK ((uint32_t)0x000000FF)
#define OB_WRP_PAGES16TO31MASK ((uint32_t)0x0000FF00)
#define OB_WRP_PAGES32TO47MASK ((uint32_t)0x00FF0000)
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
#define OB_WRP_PAGES48TO63MASK ((uint32_t)0xFF000000)
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx */
-#if defined(STM32F091xC) || defined(STM32F098xx)
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB */
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define OB_WRP_PAGES48TO127MASK ((uint32_t)0xFF000000)
-#endif /* STM32F091xC || STM32F098xx */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
#define OB_WRP_ALLPAGES ((uint32_t)0xFFFFFFFF) /*!< Write protection of all pages */
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx || STM32F030xC || STM32F070xB */
#define IS_OB_WRP(PAGE) (((PAGE) != 0x0000000))
/**
* @}
*/
-#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)|| defined(STM32F070x6)
/** @defgroup FLASHEx_OB_BOOT_SEL FLASHEx OB BOOT SEL
* @{
*/
@@ -236,7 +236,7 @@
/**
* @}
*/
-#endif /* STM32F042x6 || STM32F048xx || STM32F091xC || STM32F098xx */
+#endif /* STM32F042x6 || STM32F048xx || STM32F091xC || STM32F098xx || STM32F030xC || STM32F070x6 */
/**
* @}
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_gpio.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_gpio.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_gpio.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of GPIO HAL module. ****************************************************************************** * @attention
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_gpio_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_gpio_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_gpio_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of GPIO HAL Extension module.
******************************************************************************
* @attention
@@ -431,6 +431,71 @@
#endif /* STM32F091xC || STM32F098xx */
+#if defined(STM32F030xC)
+/*--------------------------- STM32F030xC ----------------------------------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< AF0: SPI2 Alternate Function mapping */
+#define GPIO_AF0_TIM3 ((uint8_t)0x00) /*!< AF0: TIM3 Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< AF0: TIM15 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_USART4 ((uint8_t)0x00) /*!< AF0: USART4 Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /*!< AF1: TIM15 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_USART3 ((uint8_t)0x01) /*!< AF1: USART3 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_I2C2 ((uint8_t)0x01) /*!< AF1: I2C2 Alternate Function mapping */
+#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< AF1: SPI2 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+#define GPIO_AF2_USART5 ((uint8_t)0x02) /*!< AF2: USART5 Alternate Function mapping */
+#define GPIO_AF2_USART6 ((uint8_t)0x02) /*!< AF2: USART6 Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /*!< AF3: TIM15 Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03) /*!< AF3: I2C1 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< AF4: USART4 Alternate Function mapping */
+#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< AF4: USART3 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /*!< AF4: I2C1 Alternate Function mapping */
+#define GPIO_AF4_USART5 ((uint8_t)0x04) /*!< AF4: USART5 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< AF5: TIM15 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< AF5: SPI2 Alternate Function mapping */
+#define GPIO_AF5_I2C2 ((uint8_t)0x05) /*!< AF5: I2C2 Alternate Function mapping */
+#define GPIO_AF5_MCO ((uint8_t)0x05) /*!< AF5: MCO Alternate Function mapping */
+#define GPIO_AF5_USART6 ((uint8_t)0x05) /*!< AF5: USART6 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06)
+
+#endif /* STM32F030xC */
+
#if defined (STM32F072xB) || defined (STM32F078xx)
/*--------------------------- STM32F072xB/STM32F078xx ---------------------------*/
/* AF 0 */
@@ -510,6 +575,65 @@
#endif /* STM32F072xB || STM32F078xx */
+#if defined (STM32F070xB)
+/*---------------------------------- STM32F070xB ---------------------------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1 Alternate Function mapping */
+#define GPIO_AF0_SPI2 ((uint8_t)0x00) /*!< AF0: SPI2 Alternate Function mapping */
+#define GPIO_AF0_TIM3 ((uint8_t)0x00) /*!< AF0: TIM3 Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM15 ((uint8_t)0x00) /*!< AF0: TIM15 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+#define GPIO_AF0_USART4 ((uint8_t)0x00) /*!< AF0: USART4 Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /*!< AF1: TIM15 Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_USART3 ((uint8_t)0x01) /*!< AF1: USART4 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_I2C2 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_SPI2 ((uint8_t)0x01) /*!< AF1: SPI2 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+#define GPIO_AF2_USB ((uint8_t)0x02) /*!< AF2: USB Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /*!< AF3: TIM15 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_USART4 ((uint8_t)0x04) /*!< AF4: USART4 Alternate Function mapping */
+#define GPIO_AF4_USART3 ((uint8_t)0x04) /*!< AF4: USART3 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_TIM15 ((uint8_t)0x05) /*!< AF5: TIM15 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /*!< AF5: SPI2 Alternate Function mapping */
+#define GPIO_AF5_I2C2 ((uint8_t)0x05) /*!< AF5: I2C2 Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06)
+
+#endif /* STM32F070xB */
+
#if defined (STM32F042x6) || defined (STM32F048xx)
/*--------------------------- STM32F042x6/STM32F048xx ---------------------------*/
/* AF 0 */
@@ -569,6 +693,56 @@
#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06)
#endif /* STM32F042x6 || STM32F048xx */
+
+#if defined (STM32F070x6)
+/*--------------------------------------- STM32F070x6 ----------------------------------------*/
+/* AF 0 */
+#define GPIO_AF0_EVENTOUT ((uint8_t)0x00) /*!< AF0: EVENTOUT Alternate Function mapping */
+#define GPIO_AF0_IR ((uint8_t)0x00) /*!< AF0: IR Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /*!< AF0: MCO Alternate Function mapping */
+#define GPIO_AF0_SPI1 ((uint8_t)0x00) /*!< AF0: SPI1 Alternate Function mapping */
+#define GPIO_AF0_SWDIO ((uint8_t)0x00) /*!< AF0: SWDIO Alternate Function mapping */
+#define GPIO_AF0_SWCLK ((uint8_t)0x00) /*!< AF0: SWCLK Alternate Function mapping */
+#define GPIO_AF0_TIM14 ((uint8_t)0x00) /*!< AF0: TIM14 Alternate Function mapping */
+#define GPIO_AF0_TIM17 ((uint8_t)0x00) /*!< AF0: TIM17 Alternate Function mapping */
+#define GPIO_AF0_USART1 ((uint8_t)0x00) /*!< AF0: USART1 Alternate Function mapping */
+
+/* AF 1 */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /*!< AF1: EVENTOUT Alternate Function mapping */
+#define GPIO_AF1_I2C1 ((uint8_t)0x01) /*!< AF1: I2C1 Alternate Function mapping */
+#define GPIO_AF1_IR ((uint8_t)0x01) /*!< AF1: IR Alternate Function mapping */
+#define GPIO_AF1_USART1 ((uint8_t)0x01) /*!< AF1: USART1 Alternate Function mapping */
+#define GPIO_AF1_USART2 ((uint8_t)0x01) /*!< AF1: USART2 Alternate Function mapping */
+#define GPIO_AF1_TIM3 ((uint8_t)0x01) /*!< AF1: TIM3 Alternate Function mapping */
+
+/* AF 2 */
+#define GPIO_AF2_EVENTOUT ((uint8_t)0x02) /*!< AF2: EVENTOUT Alternate Function mapping */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /*!< AF2: TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /*!< AF2: TIM16 Alternate Function mapping */
+#define GPIO_AF2_TIM17 ((uint8_t)0x02) /*!< AF2: TIM17 Alternate Function mapping */
+#define GPIO_AF2_USB ((uint8_t)0x02) /*!< AF2: USB Alternate Function mapping */
+
+/* AF 3 */
+#define GPIO_AF3_EVENTOUT ((uint8_t)0x03) /*!< AF3: EVENTOUT Alternate Function mapping */
+#define GPIO_AF3_I2C1 ((uint8_t)0x03) /*!< AF3: I2C1 Alternate Function mapping */
+
+/* AF 4 */
+#define GPIO_AF4_TIM14 ((uint8_t)0x04) /*!< AF4: TIM14 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /*!< AF4: I2C1 Alternate Function mapping */
+
+/* AF 5 */
+#define GPIO_AF5_MCO ((uint8_t)0x05) /*!< AF5: MCO Alternate Function mapping */
+#define GPIO_AF5_I2C1 ((uint8_t)0x05) /*!< AF5: I2C1 Alternate Function mapping */
+#define GPIO_AF5_TIM16 ((uint8_t)0x05) /*!< AF5: TIM16 Alternate Function mapping */
+#define GPIO_AF5_TIM17 ((uint8_t)0x05) /*!< AF5: TIM17 Alternate Function mapping */
+#define GPIO_AF5_USB ((uint8_t)0x05) /*!< AF5: USB Alternate Function mapping */
+
+/* AF 6 */
+#define GPIO_AF6_EVENTOUT ((uint8_t)0x06) /*!< AF6: EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) ((AF) <= (uint8_t)0x06)
+
+#endif /* STM32F070x6 */
/**
* @}
*/
@@ -587,24 +761,24 @@
*/
#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
defined (STM32F091xC) || defined (STM32F098xx)
-#define GET_GPIO_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
((__GPIOx__) == (GPIOB))? 1U :\
((__GPIOx__) == (GPIOC))? 2U :\
((__GPIOx__) == (GPIOD))? 3U :\
((__GPIOx__) == (GPIOE))? 4U : 5U)
#endif
-#if defined (STM32F030x6) || defined (STM32F030x8) || \
+#if defined (STM32F030x6) || defined (STM32F030x8) || defined (STM32F070xB) || defined (STM32F030xC) || \
defined (STM32F051x8) || defined (STM32F058xx)
-#define GET_GPIO_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
((__GPIOx__) == (GPIOB))? 1U :\
((__GPIOx__) == (GPIOC))? 2U :\
((__GPIOx__) == (GPIOD))? 3U : 5U)
#endif
#if defined (STM32F031x6) || defined (STM32F038xx) || \
- defined (STM32F042x6) || defined (STM32F048xx)
-#define GET_GPIO_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
+ defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6)
+#define GPIO_GET_INDEX(__GPIOx__) (((__GPIOx__) == (GPIOA))? 0U :\
((__GPIOx__) == (GPIOB))? 1U :\
((__GPIOx__) == (GPIOC))? 2U : 5U)
#endif
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_i2c.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_i2c.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_i2c.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of I2C HAL module.
******************************************************************************
* @attention
@@ -121,27 +121,6 @@
* @}
*/
-/** @defgroup I2C_Error_Code_structure_definition I2C Error Code structure definition
- * @brief I2C Error Code structure definition
- * @{
- */
-
-typedef enum
-{
- HAL_I2C_ERROR_NONE = 0x00, /*!< No error */
- HAL_I2C_ERROR_BERR = 0x01, /*!< BERR error */
- HAL_I2C_ERROR_ARLO = 0x02, /*!< ARLO error */
- HAL_I2C_ERROR_AF = 0x04, /*!< AF error */
- HAL_I2C_ERROR_OVR = 0x08, /*!< OVR error */
- HAL_I2C_ERROR_DMA = 0x10, /*!< DMA transfer error */
- HAL_I2C_ERROR_TIMEOUT = 0x20, /*!< Timeout error */
- HAL_I2C_ERROR_SIZE = 0x40 /*!< Size Management error */
-}HAL_I2C_ErrorTypeDef;
-
-/**
- * @}
- */
-
/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition
* @brief I2C handle Structure definition
* @{
@@ -167,7 +146,8 @@
__IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */
- __IO HAL_I2C_ErrorTypeDef ErrorCode; /* I2C Error code */
+ __IO uint32_t ErrorCode; /*!< I2C Error code
+ This parameter can be a value of @ref I2C_Error */
}I2C_HandleTypeDef;
/**
@@ -183,6 +163,25 @@
* @{
*/
+/** @defgroup I2C_Error I2C Error
+ * @brief I2C Error
+ * @{
+ */
+
+#define HAL_I2C_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_I2C_ERROR_BERR ((uint32_t)0x00000001) /*!< BERR error */
+#define HAL_I2C_ERROR_ARLO ((uint32_t)0x00000002) /*!< ARLO error */
+#define HAL_I2C_ERROR_AF ((uint32_t)0x00000004) /*!< AF error */
+#define HAL_I2C_ERROR_OVR ((uint32_t)0x00000008) /*!< OVR error */
+#define HAL_I2C_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+#define HAL_I2C_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */
+#define HAL_I2C_ERROR_SIZE ((uint32_t)0x00000040) /*!< Size Management error */
+
+/**
+ * @}
+ */
+
+
/** @defgroup I2C_addressing_mode I2C addressing mode
* @{
*/
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_i2c_ex.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_i2c_ex.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_i2c_ex.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of I2C HAL Extension module. ****************************************************************************** * @attention @@ -100,8 +100,10 @@ /* Peripheral Control functions ************************************************/ HAL_StatusTypeDef HAL_I2CEx_AnalogFilter_Config(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter); HAL_StatusTypeDef HAL_I2CEx_DigitalFilter_Config(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter); +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp (I2C_HandleTypeDef *hi2c); HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp (I2C_HandleTypeDef *hi2c); +#endif /* !(STM32F030x6) && !(STM32F030x8) && !(STM32F070x6) && !(STM32F070xB) && !(STM32F030xC) */ /** * @}
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_i2s.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_i2s.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_i2s.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of I2S HAL module.
******************************************************************************
* @attention
@@ -104,53 +104,41 @@
}HAL_I2S_StateTypeDef;
/**
- * @brief HAL I2S Error Code structure definition
- */
-typedef enum
-{
- HAL_I2S_ERROR_NONE = 0x00, /*!< No error */
- HAL_I2S_ERROR_TIMEOUT = 0x01, /*!< Timeout error */
- HAL_I2S_ERROR_OVR = 0x02, /*!< OVR error */
- HAL_I2S_ERROR_UDR = 0x04, /*!< UDR error */
- HAL_I2S_ERROR_DMA = 0x08, /*!< DMA transfer error */
- HAL_I2S_ERROR_UNKNOW = 0x10 /*!< Unknow Error error */
-}HAL_I2S_ErrorTypeDef;
-
-/**
* @brief I2S handle Structure definition
*/
typedef struct
{
- SPI_TypeDef *Instance; /* I2S registers base address */
+ SPI_TypeDef *Instance; /*!< I2S registers base address */
- I2S_InitTypeDef Init; /* I2S communication parameters */
+ I2S_InitTypeDef Init; /*!< I2S communication parameters */
- uint16_t *pTxBuffPtr; /* Pointer to I2S Tx transfer buffer */
+ uint16_t *pTxBuffPtr; /*!< Pointer to I2S Tx transfer buffer */
- __IO uint16_t TxXferSize; /* I2S Tx transfer size */
+ __IO uint16_t TxXferSize; /*!< I2S Tx transfer size */
- __IO uint16_t TxXferCount; /* I2S Tx transfer Counter */
+ __IO uint16_t TxXferCount; /*!< I2S Tx transfer Counter */
- uint16_t *pRxBuffPtr; /* Pointer to I2S Rx transfer buffer */
+ uint16_t *pRxBuffPtr; /*!< Pointer to I2S Rx transfer buffer */
- __IO uint16_t RxXferSize; /* I2S Rx transfer size */
+ __IO uint16_t RxXferSize; /*!< I2S Rx transfer size */
- __IO uint16_t RxXferCount; /* I2S Rx transfer counter
+ __IO uint16_t RxXferCount; /*!< I2S Rx transfer counter
(This field is initialized at the
same value as transfer size at the
beginning of the transfer and
decremented when a sample is received.
NbSamplesReceived = RxBufferSize-RxBufferCount) */
- DMA_HandleTypeDef *hdmatx; /* I2S Tx DMA handle parameters */
+ DMA_HandleTypeDef *hdmatx; /*!< I2S Tx DMA handle parameters */
- DMA_HandleTypeDef *hdmarx; /* I2S Rx DMA handle parameters */
+ DMA_HandleTypeDef *hdmarx; /*!< I2S Rx DMA handle parameters */
- __IO HAL_LockTypeDef Lock; /* I2S locking object */
+ __IO HAL_LockTypeDef Lock; /*!< I2S locking object */
- __IO HAL_I2S_StateTypeDef State; /* I2S communication state */
+ __IO HAL_I2S_StateTypeDef State; /*!< I2S communication state */
- __IO HAL_I2S_ErrorTypeDef ErrorCode; /* I2S Error code */
+ __IO uint32_t ErrorCode; /*!< I2S Error code
+ This parameter can be a value of @ref I2S_Error */
}I2S_HandleTypeDef;
/**
@@ -161,6 +149,18 @@
/** @defgroup I2S_Exported_Constants I2S Exported Constants
* @{
*/
+/** @defgroup I2S_Error I2S Error
+ * @{
+ */
+#define HAL_I2S_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_I2S_ERROR_TIMEOUT ((uint32_t)0x00000001) /*!< Timeout error */
+#define HAL_I2S_ERROR_OVR ((uint32_t)0x00000002) /*!< OVR error */
+#define HAL_I2S_ERROR_UDR ((uint32_t)0x00000004) /*!< UDR error */
+#define HAL_I2S_ERROR_DMA ((uint32_t)0x00000008) /*!< DMA transfer error */
+#define HAL_I2S_ERROR_UNKNOW ((uint32_t)0x00000010) /*!< Unknow Error error */
+/**
+ * @}
+ */
/** @defgroup I2S_Mode I2S Mode
* @{
@@ -348,13 +348,21 @@
* @param __HANDLE__: specifies the I2S Handle.
* @retval None
*/
-#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) do{__IO uint32_t tmpreg = (__HANDLE__)->Instance->DR;\
- tmpreg = (__HANDLE__)->Instance->SR;}while(0)
+#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) do{ \
+ __IO uint32_t tmpreg; \
+ tmpreg = (__HANDLE__)->Instance->DR; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg); \
+ }while(0)
/** @brief Clears the I2S UDR pending flag.
* @param __HANDLE__: specifies the I2S Handle.
* @retval None
*/
-#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__)((__HANDLE__)->Instance->SR)
+#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__) do{\
+ __IO uint32_t tmpreg;\
+ tmpreg = ((__HANDLE__)->Instance->SR);\
+ UNUSED(tmpreg); \
+ }while(0)
/**
* @}
*/
@@ -412,7 +420,7 @@
*/
/* Peripheral Control and State functions ************************************/
HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s);
-HAL_I2S_ErrorTypeDef HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
+uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
/**
* @}
*/
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_irda.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_irda.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_irda.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief This file contains all the functions prototypes for the IRDA
* firmware library.
******************************************************************************
@@ -44,7 +44,7 @@
extern "C" {
#endif
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
@@ -107,19 +107,6 @@
HAL_IRDA_STATE_ERROR = 0x04 /*!< Error */
}HAL_IRDA_StateTypeDef;
-/**
- * @brief HAL IRDA Error Code structure definition
- */
-typedef enum
-{
- HAL_IRDA_ERROR_NONE = 0x00, /*!< No error */
- HAL_IRDA_ERROR_PE = 0x01, /*!< Parity error */
- HAL_IRDA_ERROR_NE = 0x02, /*!< Noise error */
- HAL_IRDA_ERROR_FE = 0x04, /*!< frame error */
- HAL_IRDA_ERROR_ORE = 0x08, /*!< Overrun error */
- HAL_IRDA_ERROR_DMA = 0x10 /*!< DMA transfer error */
-}HAL_IRDA_ErrorTypeDef;
-
/**
* @brief IRDA clock sources definition
*/
@@ -137,34 +124,35 @@
*/
typedef struct
{
- USART_TypeDef *Instance; /* USART registers base address */
+ USART_TypeDef *Instance; /*!< USART registers base address */
- IRDA_InitTypeDef Init; /* IRDA communication parameters */
+ IRDA_InitTypeDef Init; /*!< IRDA communication parameters */
- uint8_t *pTxBuffPtr; /* Pointer to IRDA Tx transfer Buffer */
+ uint8_t *pTxBuffPtr; /*!< Pointer to IRDA Tx transfer Buffer */
- uint16_t TxXferSize; /* IRDA Tx Transfer size */
+ uint16_t TxXferSize; /*!< IRDA Tx Transfer size */
- uint16_t TxXferCount; /* IRDA Tx Transfer Counter */
+ uint16_t TxXferCount; /*!< IRDA Tx Transfer Counter */
- uint8_t *pRxBuffPtr; /* Pointer to IRDA Rx transfer Buffer */
+ uint8_t *pRxBuffPtr; /*!< Pointer to IRDA Rx transfer Buffer */
- uint16_t RxXferSize; /* IRDA Rx Transfer size */
+ uint16_t RxXferSize; /*!< IRDA Rx Transfer size */
- uint16_t RxXferCount; /* IRDA Rx Transfer Counter */
+ uint16_t RxXferCount; /*!< IRDA Rx Transfer Counter */
- uint16_t Mask; /* USART RX RDR register mask */
+ uint16_t Mask; /*!< USART RX RDR register mask */
- DMA_HandleTypeDef *hdmatx; /* IRDA Tx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmatx; /*!< IRDA Tx DMA Handle parameters */
- DMA_HandleTypeDef *hdmarx; /* IRDA Rx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmarx; /*!< IRDA Rx DMA Handle parameters */
- HAL_LockTypeDef Lock; /* Locking object */
+ HAL_LockTypeDef Lock; /*!< Locking object */
- HAL_IRDA_StateTypeDef State; /* IRDA communication state */
+ HAL_IRDA_StateTypeDef State; /*!< IRDA communication state */
- HAL_IRDA_ErrorTypeDef ErrorCode; /* IRDA Error code */
-
+ __IO uint32_t ErrorCode; /*!< IRDA Error code
+ This parameter can be a value of @ref IRDA_Error */
+
}IRDA_HandleTypeDef;
/**
@@ -189,6 +177,19 @@
* @{
*/
+/** @defgroup IRDA_Error IRDA Error
+ * @{
+ */
+#define HAL_IRDA_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_IRDA_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */
+#define HAL_IRDA_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */
+#define HAL_IRDA_ERROR_FE ((uint32_t)0x00000004) /*!< frame error */
+#define HAL_IRDA_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */
+#define HAL_IRDA_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
/** @defgroup IRDA_Parity IRDA Parity
* @{
*/
@@ -551,7 +552,7 @@
* @}
*/
-/* Include IRDA HAL Extension module */
+/* Include IRDA HAL Extended module */
#include "stm32f0xx_hal_irda_ex.h"
/* Exported functions --------------------------------------------------------*/
@@ -618,7 +619,7 @@
* @}
*/
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#ifdef __cplusplus
}
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_irda_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_irda_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_irda_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of IRDA HAL Extension module.
******************************************************************************
* @attention
@@ -43,7 +43,7 @@
extern "C" {
#endif
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
@@ -103,7 +103,7 @@
* @retval IRDA clocking source, written in __CLOCKSOURCE__.
*/
-#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx)
+#if defined(STM32F031x6) || defined(STM32F038xx)
#define __HAL_IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
switch(__HAL_RCC_GET_USART1_SOURCE()) \
@@ -125,8 +125,7 @@
break; \
} \
} while(0)
-#elif defined (STM32F030x8) || \
- defined (STM32F042x6) || defined (STM32F048xx) || \
+#elif defined (STM32F042x6) || defined (STM32F048xx) || \
defined (STM32F051x8) || defined (STM32F058xx)
#define __HAL_IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
@@ -310,7 +309,7 @@
} \
} while(0)
-#endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */
+#endif /* defined(STM32F031x6) || defined(STM32F038xx) */
/** @brief Computes the mask to apply to retrieve the received data
@@ -404,7 +403,7 @@
* @}
*/
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#ifdef __cplusplus
}
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_iwdg.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_iwdg.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_iwdg.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of IWDG HAL module. ****************************************************************************** * @attention
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_pcd.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_pcd.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_pcd.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of PCD HAL module.
******************************************************************************
* @attention
@@ -43,7 +43,7 @@
extern "C" {
#endif
-#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx)
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)|| defined(STM32F070x6)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
@@ -98,13 +98,13 @@
This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
uint32_t speed; /*!< USB Core speed.
- This parameter can be any value of @ref USB_Core_Speed */
+ This parameter can be any value of @ref PCD_Core_Speed */
uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size.
- This parameter can be any value of @ref USB_EP0_MPS */
+ This parameter can be any value of @ref PCD_EP0_MPS */
uint32_t phy_itface; /*!< Select the used PHY interface.
- This parameter can be any value of @ref USB_Core_PHY */
+ This parameter can be any value of @ref PCD_Core_PHY */
uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal.
This parameter can be set to ENABLE or DISABLE */
@@ -132,7 +132,7 @@
This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
uint8_t type; /*!< Endpoint type
- This parameter can be any value of @ref USB_EP_Type */
+ This parameter can be any value of @ref PCD_EP_Type */
uint16_t pmaadress; /*!< PMA Address
This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
@@ -190,7 +190,7 @@
* @{
*/
-/** @defgroup USB_Core_Speed USB Core Speed
+/** @defgroup PCD_Core_Speed PCD Core Speed
* @{
*/
#define PCD_SPEED_HIGH 0 /* Not Supported */
@@ -199,7 +199,7 @@
* @}
*/
-/** @defgroup USB_Core_PHY USB Core PHY
+ /** @defgroup PCD_Core_PHY PCD Core PHY
* @{
*/
#define PCD_PHY_EMBEDDED 2
@@ -207,7 +207,7 @@
* @}
*/
-/** @defgroup USB_EP0_MPS USB EP0 MPS
+/** @defgroup PCD_EP0_MPS PCD EP0 MPS
* @{
*/
#define DEP0CTL_MPS_64 0
@@ -223,7 +223,7 @@
* @}
*/
-/** @defgroup USB_EP_Type USB EP Type
+/** @defgroup PCD_EP_Type PCD EP Type
* @{
*/
#define PCD_EP_TYPE_CTRL 0
@@ -234,7 +234,7 @@
* @}
*/
-/** @defgroup USB_ENDP USB ENDP
+/** @defgroup PCD_ENDP_Type PCD_ENDP_Type
* @{
*/
@@ -267,7 +267,7 @@
* @{
*/
#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISTR) & (__INTERRUPT__)) == (__INTERRUPT__))
-#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) = ~(__INTERRUPT__))
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) &= ~(__INTERRUPT__))
#define USB_EXTI_LINE_WAKEUP ((uint32_t)0x00040000) /*!< External interrupt line 18 Connected to the USB FS EXTI Line */
@@ -770,7 +770,7 @@
* @}
*/
-#endif /* STM32F042x6 || STM32F072xB || STM32F078xx */
+#endif /* STM32F042x6 || STM32F072xB || STM32F078xx || STM32F070xB || STM32F070x6 */
#ifdef __cplusplus
}
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_pcd_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_pcd_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_pcd_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of PCD HAL Extension module.
******************************************************************************
* @attention
@@ -43,7 +43,7 @@
extern "C" {
#endif
-#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx)
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || defined(STM32F078xx)|| defined(STM32F070xB)|| defined(STM32F070x6)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
@@ -65,8 +65,8 @@
/** @addtogroup PCDEx_Exported_Functions
* @{
*/
-/** @addtogroup PCDEx_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
+
+/** @addtogroup PCDEx_Exported_Functions_Group2
* @{
*/
@@ -90,7 +90,7 @@
* @}
*/
-#endif /* STM32F042x6 || STM32F072xB || STM32F078xx */
+#endif /* STM32F042x6 || STM32F072xB || STM32F078xx || STM32F070xB || STM32F070x6*/
#ifdef __cplusplus
}
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_pwr.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_pwr.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_pwr.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of PWR HAL module. ****************************************************************************** * @attention @@ -175,6 +175,11 @@ void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); void HAL_PWR_EnterSTANDBYMode(void); +void HAL_PWR_EnableSleepOnExit(void); +void HAL_PWR_DisableSleepOnExit(void); +void HAL_PWR_EnableSEVOnPend(void); +void HAL_PWR_DisableSEVOnPend(void); + /** * @} */
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_pwr_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_pwr_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_pwr_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of PWR HAL Extension module.
******************************************************************************
* @attention
@@ -92,8 +92,8 @@
/** @defgroup PWREx_WakeUp_Pins PWREx Wakeup Pins
* @{
*/
-#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx)
+#if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define PWR_WAKEUP_PIN1 ((uint32_t)0x00)
#define PWR_WAKEUP_PIN2 ((uint32_t)0x01)
#define PWR_WAKEUP_PIN3 ((uint32_t)0x02)
@@ -117,8 +117,8 @@
#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
((PIN) == PWR_WAKEUP_PIN2))
-#endif /* defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || */
- /* defined (STM32F091xC) || defined (STM32F098xx) */
+#endif /* defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || */
+ /* defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
* @}
*/
@@ -142,9 +142,9 @@
#define PWR_EXTI_LINE_VDDIO2 ((uint32_t)0x80000000) /*!< External interrupt line 31 Connected to the Vddio2 Monitor EXTI Line */
-#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) ||\
defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx) */
+ defined (STM32F091xC) || defined (STM32F098xx) ||*/
/**
* @}
*/
@@ -204,6 +204,10 @@
#define PWR_FLAG_SB PWR_CSR_SBF
#define PWR_FLAG_PVDO PWR_CSR_PVDO
#define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF
+#elif defined (STM32F070x6) || defined (STM32F070xB) || defined (STM32F030xC)
+#define PWR_FLAG_WU PWR_CSR_WUF
+#define PWR_FLAG_SB PWR_CSR_SBF
+#define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF
#else
#define PWR_FLAG_WU PWR_CSR_WUF
#define PWR_FLAG_SB PWR_CSR_SBF
@@ -339,7 +343,7 @@
#define __HAL_PWR_VDDIO2_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_VDDIO2))
-#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) ||\
defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
defined (STM32F091xC) || defined (STM32F098xx) */
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_rcc.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_rcc.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_rcc.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of RCC HAL module.
******************************************************************************
* @attention
@@ -105,7 +105,7 @@
uint32_t HSI14CalibrationValue; /*!< The HSI14 calibration trimming value (default is RCC_HSI14CALIBRATION_DEFAULT).
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
- uint32_t HSI48State; /*!< The new state of the HSI48 (only applicable to STM32F07x and STM32F0x2 devices).
+ uint32_t HSI48State; /*!< The new state of the HSI48 (only applicable to STM32F07x, STM32F0x2 and STM32F09x devices).
This parameter can be a value of @ref RCCEx_HSI48_Config */
uint32_t LSIState; /*!< The new state of the LSI.
@@ -963,32 +963,6 @@
* @}
*/
-/** @addtogroup RCC_USARTx_Clock_Config RCC USARTx Clock Config
- * @{
- */
-/** @brief Macro to configure the USART2 clock (USART2CLK).
- * @param __USART2CLKSource__: specifies the USART2 clock source.
- * This parameter can be one of the following values:
- * @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
- * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
- * @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
- * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
- */
-#define __HAL_RCC_USART2_CONFIG(__USART2CLKSource__) \
- MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART2SW, (uint32_t)(__USART2CLKSource__))
-
-/** @brief Macro to get the USART2 clock source.
- * @retval The clock source can be one of the following values:
- * @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
- * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
- * @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
- * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
- */
-#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART2SW)))
-/**
- * @}
- */
-
/** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration
* @{
*/
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_rcc_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_rcc_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_rcc_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of RCC HAL Extension module.
******************************************************************************
* @attention
@@ -63,7 +63,8 @@
/**
* @brief RCC extended clocks structure definition
*/
-#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx)
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || \
+ defined(STM32F030xC)
typedef struct
{
uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
@@ -79,7 +80,29 @@
This parameter can be a value of @ref RCC_I2C1_Clock_Source */
}RCC_PeriphCLKInitTypeDef;
-#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx */
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx ||
+ STM32F030xC */
+
+#if defined(STM32F070x6) || defined(STM32F070xB)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t UsbClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F070x6 || STM32F070xB */
#if defined(STM32F042x6) || defined(STM32F048xx)
typedef struct
@@ -205,23 +228,9 @@
}RCC_PeriphCLKInitTypeDef;
#endif /* STM32F091xC || STM32F098xx */
-
#if defined(STM32F042x6) || defined(STM32F048xx) || \
defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
defined(STM32F091xC) || defined(STM32F098xx)
-/**
- * @brief RCC CRS Status structures definition
- */
-typedef enum
-{
- RCC_CRS_NONE = 0x00,
- RCC_CRS_TIMEOUT = 0x01,
- RCC_CRS_SYNCOK = 0x02,
- RCC_CRS_SYNCWARM = 0x04,
- RCC_CRS_SYNCERR = 0x08,
- RCC_CRS_SYNCMISS = 0x10,
- RCC_CRS_TRIMOV = 0x20
-} RCC_CRSStatusTypeDef;
/**
* @brief RCC_CRS Init structure definition
@@ -271,7 +280,7 @@
}RCC_CRSSynchroInfoTypeDef;
-#endif /* STM32F042x6 || */
+#endif /* STM32F042x6 || STM32F048xx */
/* STM32F071xB || STM32F072xB || STM32F078xx || */
/* STM32F091xC || STM32F098xx */
@@ -285,17 +294,51 @@
* @{
*/
+/** @defgroup RCCEx_CRS_Status RCCEx CRS Status
+ * @{
+ */
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+
+#define RCC_CRS_NONE ((uint32_t)0x00000000)
+#define RCC_CRS_TIMEOUT ((uint32_t)0x00000001)
+#define RCC_CRS_SYNCOK ((uint32_t)0x00000002)
+#define RCC_CRS_SYNCWARM ((uint32_t)0x00000004)
+#define RCC_CRS_SYNCERR ((uint32_t)0x00000008)
+#define RCC_CRS_SYNCMISS ((uint32_t)0x00000010)
+#define RCC_CRS_TRIMOV ((uint32_t)0x00000020)
+
+#endif /* STM32F042x6 || STM32F048xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+/**
+ * @}
+ */
+
/** @defgroup RCCEx_Periph_Clock_Selection RCCEx Periph Clock Selection
* @{
*/
-#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx)
+#if defined(STM32F030x6) || defined(STM32F030x8) || defined(STM32F031x6) || defined(STM32F038xx) || \
+ defined(STM32F030xC)
#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \
RCC_PERIPHCLK_RTC))
-#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx */
+#endif /* STM32F030x6 || STM32F030x8 || STM32F031x6 || STM32F038xx ||
+ STM32F030xC */
+
+#if defined(STM32F070x6) || defined(STM32F070xB)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_USB ((uint32_t)0x00020000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_I2C1 | \
+ RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_USB))
+#endif /* STM32F070x6 || STM32F070xB */
#if defined(STM32F042x6) || defined(STM32F048xx)
#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
@@ -365,7 +408,7 @@
* @{
*/
-#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx)
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || defined(STM32F070x6) || defined(STM32F070xB) || defined(STM32F030xC)
#define RCC_MCOSOURCE_PLLCLK_NODIV (RCC_CFGR_MCO_PLL | RCC_CFGR_PLLNODIV)
@@ -379,7 +422,7 @@
((SOURCE) == RCC_MCOSOURCE_PLLCLK_DIV2) || \
((SOURCE) == RCC_MCOSOURCE_HSI14))
-#endif /* STM32F030x6 || STM32F031x6 || STM32F038xx */
+#endif /* STM32F030x6 || STM32F031x6 || STM32F038xx || STM32F070x6 || STM32F070xB || STM32F030xC */
#if defined(STM32F030x8) || defined(STM32F051x8) || defined(STM32F058xx)
@@ -442,6 +485,20 @@
#endif /* STM32F042x6 || STM32F048xx || STM32F072xB || STM32F078xx */
+#if defined(STM32F070x6) || defined(STM32F070xB)
+
+/** @defgroup RCCEx_USB_Clock_Source RCCEx USB Clock Source
+ * @{
+ */
+#define RCC_USBCLKSOURCE_PLLCLK RCC_CFGR3_USBSW_PLLCLK
+
+#define IS_RCC_USBCLKSOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSOURCE_PLLCLK))
+/**
+ * @}
+ */
+
+#endif /* STM32F070x6 || STM32F070xB */
+
#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
defined(STM32F091xC) || defined(STM32F098xx)
@@ -554,12 +611,16 @@
/**
* @}
*/
-
#else
/** @defgroup RCCEx_PLL_Clock_Source RCCEx PLL Clock Source
* @{
*/
+
+#if defined(STM32F070xB) || defined(STM32F070x6) || defined(STM32F030xC)
+#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_PREDIV
+#else
#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_DIV2
+#endif
#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \
((SOURCE) == RCC_PLLSOURCE_HSE))
@@ -608,10 +669,10 @@
#endif /* STM32F030x8 || STM32F051x8 || STM32F058xx */
-#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || \
- defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F071xB) || \
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || defined(STM32F070x6) || \
+ defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F071xB) || defined(STM32F070xB) || \
defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define RCC_MCO_DIV1 ((uint32_t)0x00000000)
#define RCC_MCO_DIV2 ((uint32_t)0x10000000)
@@ -628,8 +689,8 @@
((DIV) == RCC_MCO_DIV64) || ((DIV) == RCC_MCO_DIV128))
#endif /* STM32F030x6 || STM32F031x6 || STM32F038xx || STM32F042x6 || STM32F048xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070x6 || STM32F070xB */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
/**
* @}
@@ -760,13 +821,13 @@
* @}
*/
+#endif /* STM32F042x6 || STM32F048xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx */
+
/**
* @}
*/
-
-#endif /* STM32F042x6 || STM32F048xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
/* Exported macros ------------------------------------------------------------*/
/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros
@@ -780,29 +841,29 @@
* using it.
* @{
*/
-#if defined(STM32F030x6) || defined(STM32F030x8) || \
- defined(STM32F051x8) || defined(STM32F058xx) || \
+#if defined(STM32F030x6) || defined(STM32F030x8) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || defined(STM32F070xB) || \
defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __GPIOD_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIODEN))
#define __GPIOD_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIODEN))
-#endif /* STM32F030x6 || STM32F030x8 || */
- /* STM32F051x8 || STM32F058xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx |[ */
- /* STM32F091xC || STM32F098xx */
+#endif /* STM32F030x6 || STM32F030x8 || */
+ /* STM32F051x8 || STM32F058xx || STM32F070xB || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __GPIOE_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOEEN))
#define __GPIOE_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOEEN))
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
#if defined(STM32F042x6) || defined(STM32F048xx) || \
defined(STM32F051x8) || defined(STM32F058xx) || \
@@ -834,8 +895,8 @@
#if defined(STM32F030x8) || \
defined(STM32F042x6) || defined(STM32F048xx) || \
defined(STM32F051x8) || defined(STM32F058xx) || \
- defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __USART2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART2EN))
#define __SPI2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI2EN))
@@ -845,8 +906,8 @@
#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */
/* STM32F051x8 || STM32F058xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
#if defined(STM32F031x6) || defined(STM32F038xx) || \
defined(STM32F042x6) || defined(STM32F048xx) || \
@@ -866,8 +927,8 @@
#if defined(STM32F030x8) || \
defined(STM32F051x8) || defined(STM32F058xx) || \
- defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __TIM6_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM6EN))
#define __I2C2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C2EN))
@@ -877,8 +938,8 @@
#endif /* STM32F030x8 || */
/* STM32F051x8 || STM32F058xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
#if defined(STM32F051x8) || defined(STM32F058xx) || \
defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
@@ -906,8 +967,8 @@
/* STM32F071xB || STM32F072xB || STM32F078xx || */
/* STM32F091xC || STM32F098xx */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __TIM7_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM7EN))
#define __USART3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART3EN))
@@ -917,18 +978,18 @@
#define __USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
#define __USART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART4EN))
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
-#if defined(STM32F042x6) || defined(STM32F048xx) || \
- defined(STM32F072xB) || defined(STM32F078xx)
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
+ defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
#define __USB_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USBEN))
#define __USB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USBEN))
-#endif /* STM32F042x6 || STM32F048xx || */
- /* STM32F072xB || STM32F078xx */
+#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F072xB || STM32F078xx || STM32F070xB */
#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || \
defined(STM32F091xC) || defined(STM32F098xx)
@@ -951,40 +1012,46 @@
/* STM32F071xB || STM32F072xB || STM32F078xx || */
/* STM32F091xC || STM32F098xx */
-#if defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __USART5_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART5EN))
#define __USART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART5EN))
-#endif /* STM32F091xC || STM32F098xx */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
*/
-#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || \
+#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
defined(STM32F051x8) || defined(STM32F058xx) || \
- defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __TIM15_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM15EN))
#define __TIM15_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM15EN))
-#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */
/* STM32F051x8 || STM32F058xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __USART6_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART6EN))
+
+#define __USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN))
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
#if defined(STM32F091xC) || defined(STM32F098xx)
-#define __USART6_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART6EN))
#define __USART7_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART7EN))
#define __USART8_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART8EN))
-#define __USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN))
#define __USART7_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART7EN))
#define __USART8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART8EN))
@@ -1002,10 +1069,10 @@
/** @brief Force or release AHB peripheral reset.
*/
-#if defined(STM32F030x6) || defined(STM32F030x8) || \
- defined(STM32F051x8) || defined(STM32F058xx) || \
- defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F030x6) || defined(STM32F030x8) || \
+ defined(STM32F051x8) || defined(STM32F058xx) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __GPIOD_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIODRST))
@@ -1013,18 +1080,18 @@
#endif /* STM32F030x6 || STM32F030x8 || */
/* STM32F051x8 || STM32F058xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __GPIOE_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOERST))
#define __GPIOE_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOERST))
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
#if defined(STM32F042x6) || defined(STM32F048xx) || \
defined(STM32F051x8) || defined(STM32F058xx) || \
@@ -1043,10 +1110,10 @@
/** @brief Force or release APB1 peripheral reset.
*/
#if defined(STM32F030x8) || \
- defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
defined(STM32F051x8) || defined(STM32F058xx) || \
- defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST))
#define __SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
@@ -1054,10 +1121,10 @@
#define __USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST))
#define __SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
-#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */
/* STM32F051x8 || STM32F058xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
#if defined(STM32F031x6) || defined(STM32F038xx) || \
defined(STM32F042x6) || defined(STM32F048xx) || \
@@ -1077,8 +1144,8 @@
#if defined(STM32F030x8) || \
defined(STM32F051x8) || defined(STM32F058xx) || \
- defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) ||\
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
#define __I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
@@ -1088,8 +1155,8 @@
#endif /* STM32F030x8 || */
/* STM32F051x8 || STM32F058xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
#if defined(STM32F051x8) || defined(STM32F058xx) || \
defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
@@ -1117,8 +1184,8 @@
/* STM32F071xB || STM32F072xB || STM32F078xx || */
/* STM32F091xC || STM32F098xx */
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
#define __USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
@@ -1128,18 +1195,18 @@
#define __USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
#define __USART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART4RST))
-#endif /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
-#if defined(STM32F042x6) || defined(STM32F048xx) || \
- defined(STM32F072xB) || defined(STM32F078xx)
+#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
+ defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB)
#define __USB_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USBRST))
#define __USB_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USBRST))
-#endif /* STM32F042x6 || STM32F048xx || */
- /* STM32F072xB || STM32F078xx */
+#endif /* STM32F042x6 || STM32F048xx || STM32F070x6 || */
+ /* STM32F072xB || STM32F078xx || STM32F070xB */
#if defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F072xB) || \
defined(STM32F091xC) || defined(STM32F098xx)
@@ -1163,38 +1230,44 @@
/* STM32F071xB || STM32F072xB || STM32F078xx || */
/* STM32F091xC || STM32F098xx */
-#if defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __USART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART5RST))
#define __USART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART5RST))
-#endif /* STM32F091xC || STM32F098xx */
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
/** @brief Force or release APB2 peripheral reset.
*/
-#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || \
+#if defined(STM32F030x8) || defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
defined(STM32F051x8) || defined(STM32F058xx) || \
- defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
#define __TIM15_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM15RST))
#define __TIM15_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM15RST))
-#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || */
+#endif /* STM32F030x8 || STM32F042x6 || STM32F048xx || STM32F070x6 || */
/* STM32F051x8 || STM32F058xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
+
+#define __USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST))
+
+#define __USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST))
+
+#endif /* STM32F091xC || STM32F098xx || STM32F030xC */
#if defined(STM32F091xC) || defined(STM32F098xx)
-#define __USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST))
#define __USART7_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART7RST))
#define __USART8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART8RST))
-#define __USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST))
#define __USART7_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART7RST))
#define __USART8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART8RST))
@@ -1250,13 +1323,14 @@
/** @defgroup RCCEx_Peripheral_Clock_Source_Config RCCEx Peripheral Clock Source Config
* @{
*/
-#if defined(STM32F042x6) || defined(STM32F048xx) || \
- defined(STM32F072xB) || defined(STM32F078xx)
+#if defined(STM32F042x6) || defined(STM32F048xx) || \
+ defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F070x6) || defined(STM32F070xB)
/** @brief Macro to configure the USB clock (USBCLK).
* @param __USBCLKSource__: specifies the USB clock source.
* This parameter can be one of the following values:
- * @arg RCC_USBCLKSOURCE_HSI48: HSI48 selected as USB clock
+ * @arg RCC_USBCLKSOURCE_HSI48: HSI48 selected as USB clock (not available for STM32F070x6 & STM32F070xB)
* @arg RCC_USBCLKSOURCE_PLLCLK: PLL Clock selected as USB clock
*/
#define __HAL_RCC_USB_CONFIG(__USBCLKSource__) \
@@ -1264,13 +1338,14 @@
/** @brief Macro to get the USB clock source.
* @retval The clock source can be one of the following values:
- * @arg RCC_USBCLKSOURCE_HSI48: HSI48 selected as USB clock
+ * @arg RCC_USBCLKSOURCE_HSI48: HSI48 selected as USB clock (not available for STM32F070x6 & STM32F070xB)
* @arg RCC_USBCLKSOURCE_PLLCLK: PLL Clock selected as USB clock
*/
#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USBSW)))
#endif /* STM32F042x6 || STM32F048xx || */
- /* STM32F072xB || STM32F078xx */
+ /* STM32F072xB || STM32F078xx || */
+ /* STM32F070x6 || STM32F070xB */
#if defined(STM32F042x6) || defined(STM32F048xx) || \
defined(STM32F051x8) || defined(STM32F058xx) || \
@@ -1299,9 +1374,9 @@
/* STM32F091xC || defined(STM32F098xx) */
#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) || \
- defined(STM32F042x6) || defined(STM32F048xx) || \
- defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
- defined(STM32F091xC) || defined(STM32F098xx)
+ defined(STM32F042x6) || defined(STM32F048xx) || defined(STM32F070x6) || \
+ defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F070xB) || \
+ defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F030xC)
/** @brief Macro to configure the MCO clock.
* @param __MCOCLKSource__: specifies the MCO clock source.
@@ -1348,10 +1423,33 @@
#define __HAL_RCC_MCO_CONFIG(__MCOCLKSource__, __MCODiv__) \
MODIFY_REG(RCC->CFGR, RCC_CFGR_MCO, __MCOCLKSource__)
-#endif /* STM32F030x6 || STM32F031x6 || STM32F038xx || */
- /* STM32F042x6 || STM32F048xx || */
- /* STM32F071xB || STM32F072xB || STM32F078xx || */
- /* STM32F091xC || STM32F098xx */
+#endif /* STM32F030x6 || STM32F031x6 || STM32F038xx || STM32F070x6 || */
+ /* STM32F042x6 || STM32F048xx || */
+ /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F070xB || */
+ /* STM32F091xC || STM32F098xx || STM32F030xC */
+
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || \
+ defined(STM32F091xC) || defined(STM32F098xx)
+/** @brief Macro to configure the USART2 clock (USART2CLK).
+ * @param __USART2CLKSource__: specifies the USART2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
+ */
+#define __HAL_RCC_USART2_CONFIG(__USART2CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART2SW, (uint32_t)(__USART2CLKSource__))
+
+/** @brief Macro to get the USART2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
+ */
+#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART2SW)))
+#endif /* STM32F071xB || STM32F072xB || STM32F078xx || STM32F091xC || STM32F098xx*/
#if defined(STM32F091xC) || defined(STM32F098xx)
/** @brief Macro to configure the USART3 clock (USART3CLK).
@@ -1374,7 +1472,7 @@
*/
#define __HAL_RCC_GET_USART3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART3SW)))
-#endif /*STM32F091xC || STM32F098xx*/
+#endif /* STM32F091xC || STM32F098xx */
/**
* @}
*/
@@ -1551,7 +1649,7 @@
void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit);
void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void);
void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo);
-RCC_CRSStatusTypeDef HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout);
+uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout);
#endif /* STM32F042x6 || STM32F048xx || */
/* STM32F071xB || STM32F072xB || STM32F078xx || */
/* STM32F091xC || STM32F098xx */
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_rtc.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_rtc.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_rtc.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of RTC HAL module. ****************************************************************************** * @attention
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_rtc_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_rtc_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_rtc_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of RTC HAL Extension module.
******************************************************************************
* @attention
@@ -116,7 +116,7 @@
* @}
*/
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB)
/** @defgroup RTCEx_Backup_Registers_Definitions RTCEx Backup Registers Definition
* @{
*/
@@ -130,7 +130,7 @@
/**
* @}
*/
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB) */
/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTCEx Time Stamp Edges definition
* @{
@@ -288,7 +288,7 @@
* @}
*/
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/** @defgroup RTCEx_Wakeup_Timer_Definitions RTCEx Wakeup Timer Definition
* @{
*/
@@ -310,7 +310,7 @@
/**
* @}
*/
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth calib period Definition
* @{
@@ -393,14 +393,14 @@
* @{
*/
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/**
* @brief Enable the RTC WakeUp Timer peripheral.
* @param __HANDLE__: specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/**
* @brief Enable the RTC TimeStamp peripheral.
@@ -409,14 +409,14 @@
*/
#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/**
* @brief Disable the RTC WakeUp Timer peripheral.
* @param __HANDLE__: specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/**
* @brief Disable the RTC TimeStamp peripheral.
@@ -463,7 +463,7 @@
*/
#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/**
* @brief Enable the RTC WakeUpTimer interrupt.
* @param __HANDLE__: specifies the RTC handle.
@@ -473,7 +473,7 @@
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/**
* @brief Disable the RTC TimeStamp interrupt.
@@ -485,7 +485,7 @@
*/
#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/**
* @brief Disable the RTC WakeUpTimer interrupt.
* @param __HANDLE__: specifies the RTC handle.
@@ -495,7 +495,7 @@
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/**
* @brief Check whether the specified RTC Tamper interrupt has occurred or not.
@@ -507,7 +507,7 @@
*/
#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/**
* @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
* @param __HANDLE__: specifies the RTC handle.
@@ -517,7 +517,7 @@
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/**
* @brief Check whether the specified RTC TimeStamp interrupt has occurred or not.
@@ -540,7 +540,7 @@
*/
#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/**
* @brief Get the selected RTC WakeUpTimer's flag status.
* @param __HANDLE__: specifies the RTC handle.
@@ -551,7 +551,7 @@
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/**
* @brief Get the selected RTC Tamper's flag status.
@@ -593,7 +593,7 @@
*/
#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/**
* @brief Clear the RTC Wake Up timer's pending flags.
* @param __HANDLE__: specifies the RTC handle.
@@ -603,7 +603,7 @@
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
-#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) */
+#endif /* defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC) */
/**
* @}
*/
@@ -630,21 +630,21 @@
void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc);
#endif
void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
#endif
/**
* @}
*/
-#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx)
+#if defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) || defined(STM32F091xC) || defined(STM32F098xx) || defined(STM32F070xB) || defined(STM32F030xC)
/** @addtogroup RTCEx_Exported_Functions_Group2
* @{
*/
@@ -667,10 +667,10 @@
*/
/* Extension Control functions ************************************************/
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB)
void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
-#endif
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F030xC) && !defined(STM32F070x6) && !defined(STM32F070xB) */
HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue);
HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_smartcard.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_smartcard.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_smartcard.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of SMARTCARD HAL module.
******************************************************************************
* @attention
@@ -43,7 +43,7 @@
extern "C" {
#endif
-#if !defined(STM32F030x4) && !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
@@ -106,7 +106,7 @@
uint16_t NACKEnable; /*!< Specifies whether the SmartCard NACK transmission is enabled
in case of parity error.
- This parameter can be a value of @ref SMARTCARD_NACK_State */
+ This parameter can be a value of @ref SMARTCARD_NACK_Enable */
uint32_t TimeOutEnable; /*!< Specifies whether the receiver timeout is enabled.
This parameter can be a value of @ref SMARTCARD_Timeout_Enable*/
@@ -173,20 +173,6 @@
}HAL_SMARTCARD_StateTypeDef;
/**
- * @brief HAL SMARTCARD Error Code structure definition
- */
-typedef enum
-{
- HAL_SMARTCARD_ERROR_NONE = 0x00, /*!< No error */
- HAL_SMARTCARD_ERROR_PE = 0x01, /*!< Parity error */
- HAL_SMARTCARD_ERROR_NE = 0x02, /*!< Noise error */
- HAL_SMARTCARD_ERROR_FE = 0x04, /*!< frame error */
- HAL_SMARTCARD_ERROR_ORE = 0x08, /*!< Overrun error */
- HAL_SMARTCARD_ERROR_DMA = 0x10, /*!< DMA transfer error */
- HAL_SMARTCARD_ERROR_RTO = 0x20 /*!< Receiver TimeOut error */
-}HAL_SMARTCARD_ErrorTypeDef;
-
-/**
* @brief SMARTCARD clock sources
*/
typedef enum
@@ -203,33 +189,34 @@
*/
typedef struct
{
- USART_TypeDef *Instance; /* USART registers base address */
+ USART_TypeDef *Instance; /*!< USART registers base address */
- SMARTCARD_InitTypeDef Init; /* SmartCard communication parameters */
+ SMARTCARD_InitTypeDef Init; /*!< SmartCard communication parameters */
- SMARTCARD_AdvFeatureInitTypeDef AdvancedInit; /* SmartCard advanced features initialization parameters */
+ SMARTCARD_AdvFeatureInitTypeDef AdvancedInit; /*!< SmartCard advanced features initialization parameters */
- uint8_t *pTxBuffPtr; /* Pointer to SmartCard Tx transfer Buffer */
+ uint8_t *pTxBuffPtr; /*!< Pointer to SmartCard Tx transfer Buffer */
- uint16_t TxXferSize; /* SmartCard Tx Transfer size */
+ uint16_t TxXferSize; /*!< SmartCard Tx Transfer size */
- uint16_t TxXferCount; /* SmartCard Tx Transfer Counter */
+ uint16_t TxXferCount; /*!< SmartCard Tx Transfer Counter */
- uint8_t *pRxBuffPtr; /* Pointer to SmartCard Rx transfer Buffer */
+ uint8_t *pRxBuffPtr; /*!< Pointer to SmartCard Rx transfer Buffer */
- uint16_t RxXferSize; /* SmartCard Rx Transfer size */
+ uint16_t RxXferSize; /*!< SmartCard Rx Transfer size */
- uint16_t RxXferCount; /* SmartCard Rx Transfer Counter */
+ uint16_t RxXferCount; /*!< SmartCard Rx Transfer Counter */
- DMA_HandleTypeDef *hdmatx; /* SmartCard Tx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmatx; /*!< SmartCard Tx DMA Handle parameters */
- DMA_HandleTypeDef *hdmarx; /* SmartCard Rx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmarx; /*!< SmartCard Rx DMA Handle parameters */
- HAL_LockTypeDef Lock; /* Locking object */
+ HAL_LockTypeDef Lock; /*!< Locking object */
- HAL_SMARTCARD_StateTypeDef State; /* SmartCard communication state */
+ HAL_SMARTCARD_StateTypeDef State; /*!< SmartCard communication state */
- HAL_SMARTCARD_ErrorTypeDef ErrorCode; /* SmartCard Error code */
+ __IO uint32_t ErrorCode; /*!< SmartCard Error code
+ This parameter can be a value of @ref SMARTCARD_Error */
}SMARTCARD_HandleTypeDef;
@@ -242,6 +229,20 @@
* @{
*/
+/** @defgroup SMARTCARD_Error SMARTCARD Error
+ * @{
+ */
+#define HAL_SMARTCARD_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_SMARTCARD_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */
+#define HAL_SMARTCARD_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */
+#define HAL_SMARTCARD_ERROR_FE ((uint32_t)0x00000004) /*!< frame error */
+#define HAL_SMARTCARD_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */
+#define HAL_SMARTCARD_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+#define HAL_SMARTCARD_ERROR_RTO ((uint32_t)0x00000020) /*!< Receiver TimeOut error */
+/**
+ * @}
+ */
+
/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length
* @{
*/
@@ -324,7 +325,8 @@
* @}
*/
-/** @defgroup SMARTCARD_NACK_State SMARTCARD NACK State
+
+/** @defgroup SMARTCARD_NACK_Enable SMARTCARD NACK Enable
* @{
*/
#define SMARTCARD_NACK_ENABLED ((uint16_t)USART_CR3_NACK)
@@ -741,7 +743,7 @@
* @}
*/
-/* Include SMARTCARD HAL Extension module */
+/* Include SMARTCARD HAL Extended module */
#include "stm32f0xx_hal_smartcard_ex.h"
@@ -804,7 +806,7 @@
* @}
*/
-#endif /* !defined(STM32F030x4) && !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#ifdef __cplusplus
}
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_smartcard_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_smartcard_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_smartcard_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of SMARTCARD HAL module.
******************************************************************************
* @attention
@@ -43,7 +43,7 @@
extern "C" {
#endif
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
@@ -318,7 +318,7 @@
* @}
*/
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#ifdef __cplusplus
}
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_smbus.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_smbus.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_smbus.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of SMBUS HAL module.
******************************************************************************
* @attention
@@ -104,42 +104,6 @@
} SMBUS_InitTypeDef;
/**
- * @brief HAL State structures definition
- */
-typedef enum
-{
- HAL_SMBUS_STATE_RESET = 0x00, /*!< SMBUS not yet initialized or disabled */
- HAL_SMBUS_STATE_READY = 0x01, /*!< SMBUS initialized and ready for use */
- HAL_SMBUS_STATE_BUSY = 0x02, /*!< SMBUS internal process is ongoing */
- HAL_SMBUS_STATE_MASTER_BUSY_TX = 0x12, /*!< Master Data Transmission process is ongoing */
- HAL_SMBUS_STATE_MASTER_BUSY_RX = 0x22, /*!< Master Data Reception process is ongoing */
- HAL_SMBUS_STATE_SLAVE_BUSY_TX = 0x32, /*!< Slave Data Transmission process is ongoing */
- HAL_SMBUS_STATE_SLAVE_BUSY_RX = 0x42, /*!< Slave Data Reception process is ongoing */
- HAL_SMBUS_STATE_TIMEOUT = 0x03, /*!< Timeout state */
- HAL_SMBUS_STATE_ERROR = 0x04, /*!< Reception process is ongoing */
- HAL_SMBUS_STATE_SLAVE_LISTEN = 0x08, /*!< Address Listen Mode is ongoing */
- /* Aliases for inter STM32 series compatibility */
- HAL_SMBUS_STATE_LISTEN = HAL_SMBUS_STATE_SLAVE_LISTEN
-}HAL_SMBUS_StateTypeDef;
-
-/**
- * @brief HAL SMBUS Error Code structure definition
- */
-typedef enum
-{
- HAL_SMBUS_ERROR_NONE = 0x00, /*!< No error */
- HAL_SMBUS_ERROR_BERR = 0x01, /*!< BERR error */
- HAL_SMBUS_ERROR_ARLO = 0x02, /*!< ARLO error */
- HAL_SMBUS_ERROR_ACKF = 0x04, /*!< ACKF error */
- HAL_SMBUS_ERROR_OVR = 0x08, /*!< OVR error */
- HAL_SMBUS_ERROR_HALTIMEOUT = 0x10, /*!< Timeout error */
- HAL_SMBUS_ERROR_BUSTIMEOUT = 0x20, /*!< Bus Timeout error */
- HAL_SMBUS_ERROR_ALERT = 0x40, /*!< Alert error */
- HAL_SMBUS_ERROR_PECERR = 0x80 /*!< PEC error */
-
-}HAL_SMBUS_ErrorTypeDef;
-
-/**
* @brief SMBUS handle Structure definition
*/
typedef struct
@@ -156,13 +120,16 @@
__IO uint32_t XferOptions; /*!< SMBUS transfer options */
- __IO HAL_SMBUS_StateTypeDef PreviousState; /*!< SMBUS communication Previous tate */
+ __IO uint32_t PreviousState; /*!< SMBUS communication Previous state
+ This parameter can be a value of @ref SMBUS_State */
HAL_LockTypeDef Lock; /*!< SMBUS locking object */
- __IO HAL_SMBUS_StateTypeDef State; /*!< SMBUS communication state */
+ __IO uint32_t State; /*!< SMBUS communication state
+ This parameter can be a value of @ref SMBUS_State */
- __IO HAL_SMBUS_ErrorTypeDef ErrorCode; /*!< SMBUS Error code */
+ __IO uint32_t ErrorCode; /*!< SMBUS Error code
+ This parameter can be a value of @ref SMBUS_Error */
}SMBUS_HandleTypeDef;
/**
@@ -175,6 +142,43 @@
* @{
*/
+/** @defgroup SMBUS_Error SMBUS Error
+ * @{
+ */
+#define HAL_SMBUS_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_SMBUS_ERROR_BERR ((uint32_t)0x00000001) /*!< BERR error */
+#define HAL_SMBUS_ERROR_ARLO ((uint32_t)0x00000002) /*!< ARLO error */
+#define HAL_SMBUS_ERROR_ACKF ((uint32_t)0x00000004) /*!< ACKF error */
+#define HAL_SMBUS_ERROR_OVR ((uint32_t)0x00000008) /*!< OVR error */
+#define HAL_SMBUS_ERROR_HALTIMEOUT ((uint32_t)0x00000010) /*!< Timeout error */
+#define HAL_SMBUS_ERROR_BUSTIMEOUT ((uint32_t)0x00000020) /*!< Bus Timeout error */
+#define HAL_SMBUS_ERROR_ALERT ((uint32_t)0x00000040) /*!< Alert error */
+#define HAL_SMBUS_ERROR_PECERR ((uint32_t)0x00000080) /*!< PEC error */
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_State SMBUS State
+ * @{
+ */
+
+#define HAL_SMBUS_STATE_RESET ((uint32_t)0x00000000) /*!< SMBUS not yet initialized or disabled */
+#define HAL_SMBUS_STATE_READY ((uint32_t)0x00000001) /*!< SMBUS initialized and ready for use */
+#define HAL_SMBUS_STATE_BUSY ((uint32_t)0x00000002) /*!< SMBUS internal process is ongoing */
+#define HAL_SMBUS_STATE_MASTER_BUSY_TX ((uint32_t)0x00000012) /*!< Master Data Transmission process is ongoing */
+#define HAL_SMBUS_STATE_MASTER_BUSY_RX ((uint32_t)0x00000022) /*!< Master Data Reception process is ongoing */
+#define HAL_SMBUS_STATE_SLAVE_BUSY_TX ((uint32_t)0x00000032) /*!< Slave Data Transmission process is ongoing */
+#define HAL_SMBUS_STATE_SLAVE_BUSY_RX ((uint32_t)0x00000042) /*!< Slave Data Reception process is ongoing */
+#define HAL_SMBUS_STATE_TIMEOUT ((uint32_t)0x00000003) /*!< Timeout state */
+#define HAL_SMBUS_STATE_ERROR ((uint32_t)0x00000004) /*!< Reception process is ongoing */
+#define HAL_SMBUS_STATE_SLAVE_LISTEN ((uint32_t)0x00000008) /*!< Address Listen Mode is ongoing */
+ /* Aliases for inter STM32 series compatibility */
+#define HAL_SMBUS_STATE_LISTEN HAL_SMBUS_STATE_SLAVE_LISTEN
+
+/**
+ * @}
+ */
+
/** @defgroup SMBUS_Analog_Filter SMBUS Analog Filter
* @{
*/
@@ -584,8 +588,8 @@
*/
/* Peripheral State and Errors functions **************************************************/
-HAL_SMBUS_StateTypeDef HAL_SMBUS_GetState(SMBUS_HandleTypeDef *hsmbus);
-uint32_t HAL_SMBUS_GetError(SMBUS_HandleTypeDef *hsmbus);
+uint32_t HAL_SMBUS_GetState(SMBUS_HandleTypeDef *hsmbus);
+uint32_t HAL_SMBUS_GetError(SMBUS_HandleTypeDef *hsmbus);
/**
* @}
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_spi.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_spi.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_spi.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of SPI HAL module.
******************************************************************************
* @attention
@@ -106,6 +106,7 @@
This parameter must 0 or 1 or 2*/
uint32_t NSSPMode; /*!< Specifies whether the NSSP signal is enabled or not .
+ This parameter can be a value of @ref SPI_NSSP_Mode
This mode is activated by the NSSP bit in the SPIx_CR2 register and
it takes effect only if the SPI interface is configured as Motorola SPI
master (FRF=0) with capture on the first edge (SPIx_CR1 CPHA = 0,
@@ -117,68 +118,52 @@
*/
typedef enum
{
- HAL_SPI_STATE_RESET = 0x00, /*!< Peripheral not Initialized */
+ HAL_SPI_STATE_RESET = 0x00, /*!< Peripheral not Initialized */
HAL_SPI_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
HAL_SPI_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
- HAL_SPI_STATE_BUSY_TX = 0x03, /*!< Data Transmission process is ongoing */
+ HAL_SPI_STATE_BUSY_TX = 0x03, /*!< Data Transmission process is ongoing */
HAL_SPI_STATE_BUSY_RX = 0x04, /*!< Data Reception process is ongoing */
- HAL_SPI_STATE_BUSY_TX_RX = 0x05, /*!< Data Transmission and Reception process is ongoing */
- HAL_SPI_STATE_TIMEOUT = 0x06, /*!< Timeout state */
- HAL_SPI_STATE_ERROR = 0x07 /*!< Data Transmission and Reception process is ongoing */
-
+ HAL_SPI_STATE_BUSY_TX_RX = 0x05, /*!< Data Transmission and Reception process is ongoing */
+ HAL_SPI_STATE_ERROR = 0x06 /*!< SPI error state */
}HAL_SPI_StateTypeDef;
/**
- * @brief HAL SPI Error Code structure definition
- */
-typedef enum
-{
- HAL_SPI_ERROR_NONE = 0x00, /*!< No error */
- HAL_SPI_ERROR_MODF = 0x01, /*!< MODF error */
- HAL_SPI_ERROR_CRC = 0x02, /*!< CRC error */
- HAL_SPI_ERROR_OVR = 0x04, /*!< OVR error */
- HAL_SPI_ERROR_FRE = 0x08, /*!< FRE error */
- HAL_SPI_ERROR_DMA = 0x10, /*!< DMA transfer error */
- HAL_SPI_ERROR_FLAG = 0x20, /*!< Error on BSY/TXE/FTLVL/FRLVL Flag */
- HAL_SPI_ERROR_UNKNOW = 0x40, /*!< Unknow Error error */
-}HAL_SPI_ErrorTypeDef;
-
-/**
* @brief SPI handle Structure definition
*/
typedef struct __SPI_HandleTypeDef
{
- SPI_TypeDef *Instance; /* SPI registers base address */
+ SPI_TypeDef *Instance; /*!< SPI registers base address */
- SPI_InitTypeDef Init; /* SPI communication parameters */
+ SPI_InitTypeDef Init; /*!< SPI communication parameters */
- uint8_t *pTxBuffPtr; /* Pointer to SPI Tx transfer Buffer */
+ uint8_t *pTxBuffPtr; /*!< Pointer to SPI Tx transfer Buffer */
- uint16_t TxXferSize; /* SPI Tx Transfer size */
+ uint16_t TxXferSize; /*!< SPI Tx Transfer size */
- uint16_t TxXferCount; /* SPI Tx Transfer Counter */
+ uint16_t TxXferCount; /*!< SPI Tx Transfer Counter */
- uint8_t *pRxBuffPtr; /* Pointer to SPI Rx transfer Buffer */
+ uint8_t *pRxBuffPtr; /*!< Pointer to SPI Rx transfer Buffer */
- uint16_t RxXferSize; /* SPI Rx Transfer size */
+ uint16_t RxXferSize; /*!< SPI Rx Transfer size */
- uint16_t RxXferCount; /* SPI Rx Transfer Counter */
+ uint16_t RxXferCount; /*!< SPI Rx Transfer Counter */
- uint32_t CRCSize; /* SPI CRC size used for the transfer */
+ uint32_t CRCSize; /*!< SPI CRC size used for the transfer */
- void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /* function pointer on Rx IRQ handler */
+ void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Rx IRQ handler */
- void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /* function pointer on Tx IRQ handler */
+ void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /*!< function pointer on Tx IRQ handler */
- DMA_HandleTypeDef *hdmatx; /* SPI Tx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmatx; /*!< SPI Tx DMA Handle parameters */
- DMA_HandleTypeDef *hdmarx; /* SPI Rx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmarx; /*!< SPI Rx DMA Handle parameters */
- HAL_LockTypeDef Lock; /* Locking object */
+ HAL_LockTypeDef Lock; /*!< Locking object */
- HAL_SPI_StateTypeDef State; /* SPI communication state */
+ HAL_SPI_StateTypeDef State; /*!< SPI communication state */
- HAL_SPI_ErrorTypeDef ErrorCode; /* SPI Error code */
+ __IO uint32_t ErrorCode; /*!< SPI Error code
+ This parameter can be a value of @ref SPI_Error */
}SPI_HandleTypeDef;
@@ -192,10 +177,24 @@
* @{
*/
+/** @defgroup SPI_Error SPI Error
+ * @{
+ */
+ #define HAL_SPI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+ #define HAL_SPI_ERROR_MODF ((uint32_t)0x00000001) /*!< MODF error */
+ #define HAL_SPI_ERROR_CRC ((uint32_t)0x00000002) /*!< CRC error */
+ #define HAL_SPI_ERROR_OVR ((uint32_t)0x00000004) /*!< OVR error */
+ #define HAL_SPI_ERROR_FRE ((uint32_t)0x00000008) /*!< FRE error */
+ #define HAL_SPI_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+ #define HAL_SPI_ERROR_FLAG ((uint32_t)0x00000020) /*!< Error on BSY/TXE/FTLVL/FRLVL Flag */
+ #define HAL_SPI_ERROR_UNKNOW ((uint32_t)0x00000040) /*!< Unknow Error error */
+/**
+ * @}
+ */
+
/** @defgroup SPI_mode SPI mode
* @{
*/
-
#define SPI_MODE_SLAVE ((uint32_t)0x00000000)
#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI)
#define IS_SPI_MODE(MODE) (((MODE) == SPI_MODE_SLAVE) || \
@@ -223,23 +222,22 @@
* @}
*/
-/** @defgroup SPI_data_size SPI data size
+/** @defgroup SPI_data_size SPI Data size
* @{
*/
-
-#define SPI_DATASIZE_4BIT ((uint16_t)0x0300)
-#define SPI_DATASIZE_5BIT ((uint16_t)0x0400)
-#define SPI_DATASIZE_6BIT ((uint16_t)0x0500)
-#define SPI_DATASIZE_7BIT ((uint16_t)0x0600)
-#define SPI_DATASIZE_8BIT ((uint16_t)0x0700)
-#define SPI_DATASIZE_9BIT ((uint16_t)0x0800)
-#define SPI_DATASIZE_10BIT ((uint16_t)0x0900)
-#define SPI_DATASIZE_11BIT ((uint16_t)0x0A00)
-#define SPI_DATASIZE_12BIT ((uint16_t)0x0B00)
-#define SPI_DATASIZE_13BIT ((uint16_t)0x0C00)
-#define SPI_DATASIZE_14BIT ((uint16_t)0x0D00)
-#define SPI_DATASIZE_15BIT ((uint16_t)0x0E00)
-#define SPI_DATASIZE_16BIT ((uint16_t)0x0F00)
+#define SPI_DATASIZE_4BIT ((uint32_t)0x0300) /*!< SPI Datasize = 4bits */
+#define SPI_DATASIZE_5BIT ((uint32_t)0x0400) /*!< SPI Datasize = 5bits */
+#define SPI_DATASIZE_6BIT ((uint32_t)0x0500) /*!< SPI Datasize = 6bits */
+#define SPI_DATASIZE_7BIT ((uint32_t)0x0600) /*!< SPI Datasize = 7bits */
+#define SPI_DATASIZE_8BIT ((uint32_t)0x0700) /*!< SPI Datasize = 8bits */
+#define SPI_DATASIZE_9BIT ((uint32_t)0x0800) /*!< SPI Datasize = 9bits */
+#define SPI_DATASIZE_10BIT ((uint32_t)0x0900) /*!< SPI Datasize = 10bits */
+#define SPI_DATASIZE_11BIT ((uint32_t)0x0A00) /*!< SPI Datasize = 11bits */
+#define SPI_DATASIZE_12BIT ((uint32_t)0x0B00) /*!< SPI Datasize = 12bits */
+#define SPI_DATASIZE_13BIT ((uint32_t)0x0C00) /*!< SPI Datasize = 13bits */
+#define SPI_DATASIZE_14BIT ((uint32_t)0x0D00) /*!< SPI Datasize = 14bits */
+#define SPI_DATASIZE_15BIT ((uint32_t)0x0E00) /*!< SPI Datasize = 15bits */
+#define SPI_DATASIZE_16BIT ((uint32_t)0x0F00) /*!< SPI Datasize = 16bits */
#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DATASIZE_16BIT) || \
((DATASIZE) == SPI_DATASIZE_15BIT) || \
((DATASIZE) == SPI_DATASIZE_14BIT) || \
@@ -261,9 +259,8 @@
/** @defgroup SPI_Clock_Polarity SPI Clock Polarity
* @{
*/
-
-#define SPI_POLARITY_LOW ((uint32_t)0x00000000)
-#define SPI_POLARITY_HIGH SPI_CR1_CPOL
+#define SPI_POLARITY_LOW ((uint32_t)0x00000000) /*!< SPI polarity Low */
+#define SPI_POLARITY_HIGH SPI_CR1_CPOL /*!< SPI polarity High */
#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_POLARITY_LOW) || \
((CPOL) == SPI_POLARITY_HIGH))
/**
@@ -273,9 +270,8 @@
/** @defgroup SPI_Clock_Phase SPI Clock Phase
* @{
*/
-
-#define SPI_PHASE_1EDGE ((uint32_t)0x00000000)
-#define SPI_PHASE_2EDGE SPI_CR1_CPHA
+#define SPI_PHASE_1EDGE ((uint32_t)0x00000000) /*!< SPI Phase 1EDGE */
+#define SPI_PHASE_2EDGE SPI_CR1_CPHA /*!< SPI Phase 2EDGE */
#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_PHASE_1EDGE) || \
((CPHA) == SPI_PHASE_2EDGE))
/**
@@ -285,19 +281,17 @@
/** @defgroup SPI_Slave_Select_management SPI Slave Select management
* @{
*/
-
#define SPI_NSS_SOFT SPI_CR1_SSM
#define SPI_NSS_HARD_INPUT ((uint32_t)0x00000000)
#define SPI_NSS_HARD_OUTPUT ((uint32_t)0x00040000)
#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_SOFT) || \
((NSS) == SPI_NSS_HARD_INPUT) || \
((NSS) == SPI_NSS_HARD_OUTPUT))
-
/**
* @}
*/
-/** @defgroup SPI_NSS_pulse_management SPI NSS pulse management
+/** @defgroup SPI_NSSP_Mode SPI NSS pulse management
* @{
*/
#define SPI_NSS_PULSE_ENABLED SPI_CR2_NSSP
@@ -305,16 +299,13 @@
#define IS_SPI_NSSP(NSSP) (((NSSP) == SPI_NSS_PULSE_ENABLED) || \
((NSSP) == SPI_NSS_PULSE_DISABLED))
-
/**
* @}
*/
-
/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler
* @{
*/
-
#define SPI_BAUDRATEPRESCALER_2 ((uint32_t)0x00000000)
#define SPI_BAUDRATEPRESCALER_4 ((uint32_t)0x00000008)
#define SPI_BAUDRATEPRESCALER_8 ((uint32_t)0x00000010)
@@ -338,7 +329,6 @@
/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB transmission
* @{
*/
-
#define SPI_FIRSTBIT_MSB ((uint32_t)0x00000000)
#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST
#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FIRSTBIT_MSB) || \
@@ -350,7 +340,6 @@
/** @defgroup SPI_TI_mode SPI TI mode
* @{
*/
-
#define SPI_TIMODE_DISABLED ((uint32_t)0x00000000)
#define SPI_TIMODE_ENABLED SPI_CR2_FRF
#define IS_SPI_TIMODE(MODE) (((MODE) == SPI_TIMODE_DISABLED) || \
@@ -362,7 +351,6 @@
/** @defgroup SPI_CRC_Calculation SPI CRC Calculation
* @{
*/
-
#define SPI_CRCCALCULATION_DISABLED ((uint32_t)0x00000000)
#define SPI_CRCCALCULATION_ENABLED SPI_CR1_CRCEN
#define IS_SPI_CRC_CALCULATION(CALCULATION) (((CALCULATION) == SPI_CRCCALCULATION_DISABLED) || \
@@ -391,11 +379,11 @@
/** @defgroup SPI_FIFO_reception_threshold SPI FIFO reception threshold
* @{
* This parameter can be one of the following values:
- * SPI_RxFIFOThreshold_HF: RXNE event is generated if the FIFO
+ * SPI_RXFIFO_THRESHOLD or SPI_RXFIFO_THRESHOLD_QF :
+ * RXNE event is generated if the FIFO
* level is greater or equal to 1/2(16-bits).
- * SPI_RxFIFOThreshold_QF: RXNE event is generated if the FIFO
- * level is greater or equal to 1/4(8 bits).
- */
+ * SPI_RXFIFO_THRESHOLD_HF: RXNE event is generated if the FIFO
+ * level is greater or equal to 1/4(8 bits). */
#define SPI_RXFIFO_THRESHOLD SPI_CR2_FRXTH
#define SPI_RXFIFO_THRESHOLD_QF SPI_CR2_FRXTH
#define SPI_RXFIFO_THRESHOLD_HF ((uint32_t)0x0)
@@ -408,8 +396,8 @@
* @brief SPI Interrupt definition
* Elements values convention: 0xXXXXXXXX
* - XXXXXXXX : Interrupt control mask
- * @{
- */
+ * @{
+ */
#define SPI_IT_TXE SPI_CR2_TXEIE
#define SPI_IT_RXNE SPI_CR2_RXNEIE
#define SPI_IT_ERR SPI_CR2_ERRIE
@@ -441,12 +429,11 @@
/** @defgroup SPI_transmission_fifo_status_level SPI transmission fifo status level
* @{
*/
+#define SPI_FTLVL_EMPTY ((uint32_t)0x0000)
+#define SPI_FTLVL_QUARTER_FULL ((uint32_t)0x0800)
+#define SPI_FTLVL_HALF_FULL ((uint32_t)0x1000)
+#define SPI_FTLVL_FULL ((uint32_t)0x1800)
-#define SPI_FTLVL_EMPTY ((uint16_t)0x0000)
-#define SPI_FTLVL_QUARTER_FULL ((uint16_t)0x0800)
-#define SPI_FTLVL_HALF_FULL ((uint16_t)0x1000)
-#define SPI_FTLVL_FULL ((uint16_t)0x1800)
-
/**
* @}
*/
@@ -454,11 +441,10 @@
/** @defgroup SPI_reception_fifo_status_level SPI reception fifo status level
* @{
*/
-#define SPI_FRLVL_EMPTY ((uint16_t)0x0000)
-#define SPI_FRLVL_QUARTER_FULL ((uint16_t)0x0200)
-#define SPI_FRLVL_HALF_FULL ((uint16_t)0x0400)
-#define SPI_FRLVL_FULL ((uint16_t)0x0600)
-
+#define SPI_FRLVL_EMPTY ((uint32_t)0x0000)
+#define SPI_FRLVL_QUARTER_FULL ((uint32_t)0x0200)
+#define SPI_FRLVL_HALF_FULL ((uint32_t)0x0400)
+#define SPI_FRLVL_FULL ((uint32_t)0x0600)
/**
* @}
*/
@@ -480,23 +466,22 @@
#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
/** @brief Enables or disables the specified SPI interrupts.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * @param __INTERRUPT__ : specifies the interrupt source to enable or disable.
* This parameter can be one of the following values:
* @arg SPI_IT_TXE: Tx buffer empty interrupt enable
* @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
* @arg SPI_IT_ERR: Error interrupt enable
* @retval None
*/
-
#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
-#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (uint16_t)(~(__INTERRUPT__)))
+#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__)))
/** @brief Checks if the specified SPI interrupt source is enabled or disabled.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @param __INTERRUPT__: specifies the SPI interrupt source to check.
+ * @param __INTERRUPT__ : specifies the SPI interrupt source to check.
* This parameter can be one of the following values:
* @arg SPI_IT_TXE: Tx buffer empty interrupt enable
* @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
@@ -506,9 +491,9 @@
#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
/** @brief Checks whether the specified SPI flag is set or not.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
- * @param __FLAG__: specifies the flag to check.
+ * @param __FLAG__ : specifies the flag to check.
* This parameter can be one of the following values:
* @arg SPI_FLAG_RXNE: Receive buffer not empty flag
* @arg SPI_FLAG_TXE: Transmit buffer empty flag
@@ -517,73 +502,86 @@
* @arg SPI_FLAG_OVR: Overrun flag
* @arg SPI_FLAG_BSY: Busy flag
* @arg SPI_FLAG_FRE: Frame format error flag
+ * @arg SPI_FLAG_FTLVL: SPI fifo transmission level
+ * @arg SPI_FLAG_FRLVL: SPI fifo reception level
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
/** @brief Clears the SPI CRCERR pending flag.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR))
/** @brief Clears the SPI MODF pending flag.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
*
* @retval None
*/
-#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) do{(__HANDLE__)->Instance->SR;\
- (__HANDLE__)->Instance->CR1 &= (uint16_t)(~SPI_CR1_SPE);}while(0)
+#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) do{\
+ __IO uint32_t tmpreg;\
+ tmpreg = (__HANDLE__)->Instance->SR;\
+ UNUSED(tmpreg); \
+ (__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE);\
+ }while(0)
/** @brief Clears the SPI OVR pending flag.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
*
* @retval None
*/
-#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) do{(__HANDLE__)->Instance->DR;\
- (__HANDLE__)->Instance->SR;}while(0)
-
+#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) do{ \
+ __IO uint32_t tmpreg; \
+ tmpreg = (__HANDLE__)->Instance->DR; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ UNUSED(tmpreg); \
+ } while(0)
+
/** @brief Clears the SPI FRE pending flag.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
*
* @retval None
*/
-#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR)
-
+#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) do{\
+ __IO uint32_t tmpreg;\
+ tmpreg = ((__HANDLE__)->Instance->SR);\
+ UNUSED(tmpreg); \
+ }while(0)
/** @brief Enables the SPI.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
#define __HAL_SPI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_SPE)
/** @brief Disables the SPI.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
-#define __HAL_SPI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (uint16_t)(~SPI_CR1_SPE))
+#define __HAL_SPI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE))
/** @brief Sets the SPI transmit-only mode.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
#define __HAL_SPI_1LINE_TX(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_BIDIOE)
/** @brief Sets the SPI receive-only mode.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
-#define __HAL_SPI_1LINE_RX(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (uint16_t)(~SPI_CR1_BIDIOE))
+#define __HAL_SPI_1LINE_RX(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (~SPI_CR1_BIDIOE))
/** @brief Resets the CRC calculation of the SPI.
- * @param __HANDLE__: specifies the SPI Handle.
+ * @param __HANDLE__ : specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
@@ -629,10 +627,18 @@
HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_FlushRxFifo(SPI_HandleTypeDef *hspi);
+
void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi);
void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi);
void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi);
void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi);
void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
/**
* @}
@@ -644,6 +650,7 @@
/* Peripheral State and Error functions ***************************************/
HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi);
+uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
/**
* @}
*/
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_tim.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_tim.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_tim.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of TIM HAL module.
******************************************************************************
* @attention
@@ -290,7 +290,7 @@
TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */
HAL_TIM_ActiveChannel Channel; /*!< Active channel */
DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array
- This array is accessed by a @ref DMA_Handle_index */
+ This array is accessed by a @ref TIM_DMA_Handle_index */
HAL_LockTypeDef Lock; /*!< Locking object */
__IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */
}TIM_HandleTypeDef;
@@ -1117,7 +1117,7 @@
* @}
*/
-/** @defgroup DMA_Handle_index TIM DMA Handle Index
+/** @defgroup TIM_DMA_Handle_index TIM DMA Handle Index
* @{
*/
#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0) /*!< Index of the DMA handle used for Update DMA requests */
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_tim_ex.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_tim_ex.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_tim_ex.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief Header file of TIM HAL Extended module. ****************************************************************************** * @attention
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_tsc.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_tsc.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file stm32f0xx_hal_tsc.h * @author MCD Application Team - * @version V1.1.0 - * @date 03-Oct-2014 + * @version V1.2.0 + * @date 11-December-2014 * @brief This file contains all the functions prototypes for the TSC firmware * library. ******************************************************************************
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_uart.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_uart.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_uart.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of UART HAL module.
******************************************************************************
* @attention
@@ -142,22 +142,6 @@
} UART_AdvFeatureInitTypeDef;
/**
- * @brief UART wake up from stop mode parameters
- */
-typedef struct
-{
- uint32_t WakeUpEvent; /*!< Specifies which event will activat the Wakeup from Stop mode flag (WUF).
- This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection.
- If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must
- be filled up. */
-
- uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long.
- This parameter can be a value of @ref UART_WakeUp_Address_Length */
-
- uint8_t Address; /*!< UART/USART node address (7-bit long max) */
-} UART_WakeUpTypeDef;
-
-/**
* @brief HAL UART State structures definition
*/
typedef enum
@@ -172,19 +156,6 @@
HAL_UART_STATE_ERROR = 0x04 /*!< Error */
}HAL_UART_StateTypeDef;
-/**
- * @brief HAL UART Error Code structure definition
- */
-typedef enum
-{
- HAL_UART_ERROR_NONE = 0x00, /*!< No error */
- HAL_UART_ERROR_PE = 0x01, /*!< Parity error */
- HAL_UART_ERROR_NE = 0x02, /*!< Noise error */
- HAL_UART_ERROR_FE = 0x04, /*!< frame error */
- HAL_UART_ERROR_ORE = 0x08, /*!< Overrun error */
- HAL_UART_ERROR_DMA = 0x10 /*!< DMA transfer error */
-}HAL_UART_ErrorTypeDef;
-
/**
* @brief UART clock sources definition
*/
@@ -202,35 +173,36 @@
*/
typedef struct
{
- USART_TypeDef *Instance; /* UART registers base address */
+ USART_TypeDef *Instance; /*!< UART registers base address */
- UART_InitTypeDef Init; /* UART communication parameters */
+ UART_InitTypeDef Init; /*!< UART communication parameters */
- UART_AdvFeatureInitTypeDef AdvancedInit; /* UART Advanced Features initialization parameters */
+ UART_AdvFeatureInitTypeDef AdvancedInit; /*!< UART Advanced Features initialization parameters */
- uint8_t *pTxBuffPtr; /* Pointer to UART Tx transfer Buffer */
+ uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */
- uint16_t TxXferSize; /* UART Tx Transfer size */
+ uint16_t TxXferSize; /*!< UART Tx Transfer size */
- uint16_t TxXferCount; /* UART Tx Transfer Counter */
+ uint16_t TxXferCount; /*!< UART Tx Transfer Counter */
- uint8_t *pRxBuffPtr; /* Pointer to UART Rx transfer Buffer */
+ uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */
- uint16_t RxXferSize; /* UART Rx Transfer size */
+ uint16_t RxXferSize; /*!< UART Rx Transfer size */
- uint16_t RxXferCount; /* UART Rx Transfer Counter */
+ uint16_t RxXferCount; /*!< UART Rx Transfer Counter */
- uint16_t Mask; /* UART Rx RDR register mask */
+ uint16_t Mask; /*!< UART Rx RDR register mask */
- DMA_HandleTypeDef *hdmatx; /* UART Tx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */
- DMA_HandleTypeDef *hdmarx; /* UART Rx DMA Handle parameters */
+ DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */
- HAL_LockTypeDef Lock; /* Locking object */
+ HAL_LockTypeDef Lock; /*!< Locking object */
- HAL_UART_StateTypeDef State; /* UART communication state */
+ HAL_UART_StateTypeDef State; /*!< UART communication state */
- HAL_UART_ErrorTypeDef ErrorCode; /* UART Error code */
+ __IO uint32_t ErrorCode; /*!< UART Error code
+ This parameter can be a value of @ref UART_Error */
}UART_HandleTypeDef;
@@ -243,13 +215,28 @@
* @{
*/
+/** @defgroup UART_Error UART Error
+ * @{
+ */
+#define HAL_UART_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_UART_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */
+#define HAL_UART_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */
+#define HAL_UART_ERROR_FE ((uint32_t)0x00000004) /*!< frame error */
+#define HAL_UART_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */
+#define HAL_UART_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
/** @defgroup UART_Stop_Bits UART Number of Stop Bits
* @{
*/
#define UART_STOPBITS_1 ((uint32_t)0x0000)
#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+#define UART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
- ((STOPBITS) == UART_STOPBITS_2))
+ ((STOPBITS) == UART_STOPBITS_2) || \
+ ((STOPBITS) == UART_STOPBITS_1_5))
/**
* @}
*/
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_uart_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_uart_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_uart_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of UART HAL Extension module.
******************************************************************************
* @attention
@@ -55,6 +55,31 @@
*/
/* Exported types ------------------------------------------------------------*/
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+/** @defgroup UARTEx_Exported_Types UARTEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief UART wake up from stop mode parameters
+ */
+typedef struct
+{
+ uint32_t WakeUpEvent; /*!< Specifies which event will activat the Wakeup from Stop mode flag (WUF).
+ This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection.
+ If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must
+ be filled up. */
+
+ uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long.
+ This parameter can be a value of @ref UART_WakeUp_Address_Length */
+
+ uint8_t Address; /*!< UART/USART node address (7-bit long max) */
+} UART_WakeUpTypeDef;
+/**
+ * @}
+ */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+
/* Exported constants --------------------------------------------------------*/
/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants
* @{
@@ -63,9 +88,9 @@
/** @defgroup UARTEx_Word_Length UARTEx Word Length
* @{
*/
-#if defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx)
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define UART_WORDLENGTH_7B ((uint32_t)USART_CR1_M1)
#define UART_WORDLENGTH_8B ((uint32_t)0x00000000)
#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
@@ -77,9 +102,9 @@
#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \
((LENGTH) == UART_WORDLENGTH_9B))
-#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx) */
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
* @}
*/
@@ -87,9 +112,9 @@
/** @defgroup UARTEx_AutoBaud_Rate_Mode UARTEx Advanced Feature AutoBaud Rate Mode
* @{
*/
-#if defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx)
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x0000)
#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0)
#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME ((uint32_t)USART_CR2_ABRMODE_1)
@@ -103,15 +128,15 @@
#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0)
#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(MODE) (((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \
((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE))
-#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx) */
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
* @}
*/
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/** @defgroup UARTEx_LIN UARTEx Local Interconnection Network mode
* @{
*/
@@ -133,7 +158,7 @@
/**
* @}
*/
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
/** @defgroup UART_Flags UARTEx Status Flags
* Elements values convention: 0xXXXX
@@ -142,24 +167,24 @@
*/
#define UART_FLAG_REACK ((uint32_t)0x00400000)
#define UART_FLAG_TEACK ((uint32_t)0x00200000)
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_FLAG_WUF ((uint32_t)0x00100000)
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#define UART_FLAG_RWU ((uint32_t)0x00080000)
#define UART_FLAG_SBKF ((uint32_t)0x00040000
#define UART_FLAG_CMF ((uint32_t)0x00020000)
#define UART_FLAG_BUSY ((uint32_t)0x00010000)
#define UART_FLAG_ABRF ((uint32_t)0x00008000)
#define UART_FLAG_ABRE ((uint32_t)0x00004000)
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8)
#define UART_FLAG_EOBF ((uint32_t)0x00001000)
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
#define UART_FLAG_RTOF ((uint32_t)0x00000800)
#define UART_FLAG_CTS ((uint32_t)0x00000400)
#define UART_FLAG_CTSIF ((uint32_t)0x00000200)
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_FLAG_LBDF ((uint32_t)0x00000100)
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#define UART_FLAG_TXE ((uint32_t)0x00000080)
#define UART_FLAG_TC ((uint32_t)0x00000040)
#define UART_FLAG_RXNE ((uint32_t)0x00000020)
@@ -173,13 +198,13 @@
*/
/** @defgroup UART_Interrupt_definition UARTEx Interrupts Definition
- * Elements values convention: 0000ZZZZ0XXYYYYYb
+ * Elements values convention: 0000ZZZZZ0XXYYYYYb
* - YYYYY : Interrupt source position in the XX register (5bits)
* - XX : Interrupt source register (2bits)
* - 01: CR1 register
* - 10: CR2 register
* - 11: CR3 register
- * - ZZZZ : Flag position in the ISR register(4bits)
+ * - ZZZZZ : Flag position in the ISR register(5bits)
* @{
*/
#define UART_IT_PE ((uint16_t)0x0028)
@@ -187,14 +212,14 @@
#define UART_IT_TC ((uint16_t)0x0626)
#define UART_IT_RXNE ((uint16_t)0x0525)
#define UART_IT_IDLE ((uint16_t)0x0424)
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_IT_LBD ((uint16_t)0x0846)
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#define UART_IT_CTS ((uint16_t)0x096A)
-#define UART_IT_CM ((uint16_t)0x142E)
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#define UART_IT_CM ((uint16_t)0x112E)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_IT_WUF ((uint16_t)0x1476)
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
/**
* @}
*/
@@ -209,16 +234,16 @@
#define UART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */
#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag (not available on F030xx devices)*/
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */
#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */
#define UART_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */
#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
/**
* @}
*/
@@ -247,7 +272,7 @@
* @}
*/
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/** @defgroup UART_Stop_Mode_Enable UARTEx Advanced Feature Stop Mode Enable
* @{
*/
@@ -271,7 +296,7 @@
/**
* @}
*/
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
/**
* @}
@@ -312,7 +337,7 @@
break; \
} \
} while(0)
-#elif defined (STM32F030x8) || \
+#elif defined (STM32F030x8) || defined (STM32F070x6) || \
defined (STM32F042x6) || defined (STM32F048xx) || \
defined (STM32F051x8) || defined (STM32F058xx)
#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
@@ -347,6 +372,47 @@
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
} \
} while(0)
+#elif defined(STM32F070xB)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
@@ -496,6 +562,55 @@
(__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
} \
} while(0)
+#elif defined(STM32F030xC)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
#endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */
@@ -509,9 +624,9 @@
* @param __HANDLE__: specifies the UART Handle
* @retval none
*/
-#if defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx)
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define __HAL_UART_MASK_COMPUTATION(__HANDLE__) \
do { \
if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \
@@ -574,9 +689,9 @@
} \
} \
} while(0)
-#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx) */
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
* @}
*/
@@ -591,23 +706,25 @@
* @{
*/
/* Initialization and de-initialization functions ****************************/
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t UART_DEPolarity, uint32_t UART_DEAssertionTime, uint32_t UART_DEDeassertionTime);
HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
-HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
-HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart);
-HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart);
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
/**
* @}
*/
/** @addtogroup UARTEx_Exported_Functions_Group2
- * @brief Extended I/O operation functions
+ * @brief Extended UART Interrupt handling function
* @{
*/
-/* I/O operation functions ***************************************************/
+/* IO operation functions ***************************************************/
void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
void HAL_UART_WakeupCallback(UART_HandleTypeDef *huart);
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
/**
* @}
*/
@@ -618,9 +735,13 @@
*/
/* Peripheral Control functions **********************************************/
-void UART_AdvFeatureConfig(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength);
+#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6) && !defined(STM32F030xC)
+HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
+HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart);
HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
/**
* @}
*/
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_usart.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_usart.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_usart.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of USART HAL module.
******************************************************************************
* @attention
@@ -112,19 +112,6 @@
}HAL_USART_StateTypeDef;
/**
- * @brief HAL USART Error Code structure definition
- */
-typedef enum
-{
- HAL_USART_ERROR_NONE = 0x00, /*!< No error */
- HAL_USART_ERROR_PE = 0x01, /*!< Parity error */
- HAL_USART_ERROR_NE = 0x02, /*!< Noise error */
- HAL_USART_ERROR_FE = 0x04, /*!< frame error */
- HAL_USART_ERROR_ORE = 0x08, /*!< Overrun error */
- HAL_USART_ERROR_DMA = 0x10 /*!< DMA transfer error */
-}HAL_USART_ErrorTypeDef;
-
-/**
* @brief USART clock sources definitions
*/
typedef enum
@@ -163,11 +150,12 @@
DMA_HandleTypeDef *hdmarx; /*!< USART Rx DMA Handle parameters */
- HAL_LockTypeDef Lock; /*!< Locking object */
+ HAL_LockTypeDef Lock; /*!< Locking object */
- HAL_USART_StateTypeDef State; /*!< USART communication state */
+ HAL_USART_StateTypeDef State; /*!< USART communication state */
- HAL_USART_ErrorTypeDef ErrorCode; /*!< USART Error code */
+ __IO uint32_t ErrorCode; /*!< USART Error code
+ This parameter can be a value of @ref USART_Error */
}USART_HandleTypeDef;
@@ -180,15 +168,26 @@
* @{
*/
+/** @defgroup USART_Error USART Error
+ * @{
+ */
+#define HAL_USART_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_USART_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */
+#define HAL_USART_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */
+#define HAL_USART_ERROR_FE ((uint32_t)0x00000004) /*!< frame error */
+#define HAL_USART_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */
+#define HAL_USART_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
+/**
+ * @}
+ */
+
/** @defgroup USART_Stop_Bits USART Number of Stop Bits
* @{
*/
#define USART_STOPBITS_1 ((uint32_t)0x0000)
-#define USART_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0)
#define USART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
#define USART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_STOPBITS_1) || \
- ((STOPBITS) == USART_STOPBITS_0_5) || \
((STOPBITS) == USART_STOPBITS_1_5) || \
((STOPBITS) == USART_STOPBITS_2))
/**
@@ -525,7 +524,6 @@
HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart);
void HAL_USART_MspInit(USART_HandleTypeDef *husart);
void HAL_USART_MspDeInit(USART_HandleTypeDef *husart);
-void HAL_USART_SetConfig(USART_HandleTypeDef *husart);
HAL_StatusTypeDef HAL_USART_CheckIdleState(USART_HandleTypeDef *husart);
/**
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_usart_ex.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_usart_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_usart_ex.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of USART HAL Extension module.
******************************************************************************
* @attention
@@ -63,9 +63,9 @@
/** @defgroup USARTEx_Word_Length USARTEx Word Length
* @{
*/
-#if defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx)
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define USART_WORDLENGTH_7B ((uint32_t)USART_CR1_M1)
#define USART_WORDLENGTH_8B ((uint32_t)0x00000000)
#define USART_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
@@ -77,9 +77,9 @@
#define USART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WORDLENGTH_8B) || \
((LENGTH) == USART_WORDLENGTH_9B))
-#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || defined (STM32F070xB) || \
defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx) */
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
* @}
*/
@@ -121,7 +121,7 @@
break; \
} \
} while(0)
-#elif defined (STM32F030x8) || \
+#elif defined (STM32F030x8) || defined (STM32F070x6) || \
defined (STM32F042x6) || defined (STM32F048xx) || \
defined (STM32F051x8) || defined (STM32F058xx)
#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
@@ -156,6 +156,47 @@
(__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
} \
} while(0)
+#elif defined (STM32F070xB)
+#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
@@ -304,7 +345,56 @@
{ \
(__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
} \
- } while(0)
+ } while(0)
+#elif defined(STM32F030xC)
+#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
#endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */
@@ -317,9 +407,9 @@
* @param __HANDLE__: specifies the USART Handle
* @retval none
*/
-#if defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx)
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
#define __HAL_USART_MASK_COMPUTATION(__HANDLE__) \
do { \
if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_9B) \
@@ -382,9 +472,9 @@
} \
} \
} while(0)
-#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
- defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
- defined (STM32F091xC) || defined (STM32F098xx) */
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
* @}
*/
--- a/TARGET_NUCLEO_F091RC/stm32f0xx_hal_wwdg.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_wwdg.h Tue Feb 03 15:31:20 2015 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_wwdg.h
* @author MCD Application Team
- * @version V1.1.0
- * @date 03-Oct-2014
+ * @version V1.2.0
+ * @date 11-December-2014
* @brief Header file of WWDG HAL module.
******************************************************************************
* @attention
@@ -81,10 +81,10 @@
This parameter can be a value of @ref WWDG_Prescaler */
uint32_t Window; /*!< Specifies the WWDG window value to be compared to the downcounter.
- This parameter must be a number lower than Max_Data = 0x80 */
+ This parameter must be a number lower than Max_Data = 0x80 */
uint32_t Counter; /*!< Specifies the WWDG free-running downcounter value.
- This parameter must be a number between Min_Data = 0x40 and Max_Data = 0x7F */
+ This parameter must be a number between Min_Data = 0x40 and Max_Data = 0x7F */
} WWDG_InitTypeDef;
@@ -113,24 +113,10 @@
* @{
*/
-/** @defgroup WWDG_BitAddress_AliasRegion WWDG BitAddress AliasRegion
- * @brief WWDG registers bit address in the alias region
- * @{
- */
-
-/* --- CFR Register ---*/
-/* Alias word address of EWI bit */
-#define CFR_BASE (uint32_t)(WWDG_BASE + 0x04)
-
-/**
- * @}
- */
-
/** @defgroup WWDG_Interrupt_definition WWDG Interrupt definition
* @{
*/
-#define WWDG_IT_EWI ((uint32_t)WWDG_CFR_EWI)
-
+#define WWDG_IT_EWI WWDG_CFR_EWI /*!< Early wakeup interrupt */
/**
* @}
*/
@@ -139,8 +125,7 @@
* @brief WWDG Flag definition
* @{
*/
-#define WWDG_FLAG_EWIF ((uint32_t)WWDG_SR_EWIF) /*!< Early wakeup interrupt flag */
-
+#define WWDG_FLAG_EWIF WWDG_SR_EWIF /*!< Early wakeup interrupt flag */
/**
* @}
*/
@@ -148,16 +133,15 @@
/** @defgroup WWDG_Prescaler WWDG Prescaler
* @{
*/
-#define WWDG_PRESCALER_1 ((uint32_t)0x00000000) /*!< WWDG counter clock = (PCLK1/4096)/1 */
-#define WWDG_PRESCALER_2 ((uint32_t)WWDG_CFR_WDGTB0) /*!< WWDG counter clock = (PCLK1/4096)/2 */
-#define WWDG_PRESCALER_4 ((uint32_t)WWDG_CFR_WDGTB1) /*!< WWDG counter clock = (PCLK1/4096)/4 */
-#define WWDG_PRESCALER_8 ((uint32_t)WWDG_CFR_WDGTB) /*!< WWDG counter clock = (PCLK1/4096)/8 */
+#define WWDG_PRESCALER_1 ((uint32_t)0x00000000) /*!< WWDG counter clock = (PCLK1/4096)/1 */
+#define WWDG_PRESCALER_2 WWDG_CFR_WDGTB0 /*!< WWDG counter clock = (PCLK1/4096)/2 */
+#define WWDG_PRESCALER_4 WWDG_CFR_WDGTB1 /*!< WWDG counter clock = (PCLK1/4096)/4 */
+#define WWDG_PRESCALER_8 WWDG_CFR_WDGTB /*!< WWDG counter clock = (PCLK1/4096)/8 */
-#define IS_WWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == WWDG_PRESCALER_1) || \
- ((__PRESCALER__) == WWDG_PRESCALER_2) || \
- ((__PRESCALER__) == WWDG_PRESCALER_4) || \
- ((__PRESCALER__) == WWDG_PRESCALER_8))
-
+#define IS_WWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == WWDG_PRESCALER_1) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_2) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_4) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_8))
/**
* @}
*/
@@ -165,8 +149,7 @@
/** @defgroup WWDG_Window WWDG Window
* @{
*/
-#define IS_WWDG_WINDOW(__WINDOW__) ((__WINDOW__) <= 0x7F)
-
+#define IS_WWDG_WINDOW(__WINDOW__) ((__WINDOW__) <= 0x7F)
/**
* @}
*/
@@ -174,8 +157,7 @@
/** @defgroup WWDG_Counter WWDG Counter
* @{
*/
-#define IS_WWDG_COUNTER(__COUNTER__) (((__COUNTER__) >= 0x40) && ((__COUNTER__) <= 0x7F))
-
+#define IS_WWDG_COUNTER(__COUNTER__) (((__COUNTER__) >= 0x40) && ((__COUNTER__) <= 0x7F))
/**
* @}
*/
@@ -194,14 +176,65 @@
* @param __HANDLE__: WWDG handle
* @retval None
*/
-#define __HAL_WWDG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_WWDG_STATE_RESET)
+#define __HAL_WWDG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_WWDG_STATE_RESET)
/**
* @brief Enables the WWDG peripheral.
* @param __HANDLE__: WWDG handle
* @retval None
*/
-#define __HAL_WWDG_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, WWDG_CR_WDGA)
+#define __HAL_WWDG_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= WWDG_CR_WDGA)
+
+/**
+ * @brief Disables the WWDG peripheral.
+ * @param __HANDLE__: WWDG handle
+ * @note WARNING: This is a dummy macro for HAL code alignment.
+ * Once enable, WWDG Peripheral cannot be disabled except by a system reset.
+ * @retval None
+ */
+#define __HAL_WWDG_DISABLE(__HANDLE__) /* dummy macro */
+
+/**
+ * @brief Enables the WWDG early wakeup interrupt.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the interrupt to enable.
+ * This parameter can be one of the following values:
+ * @arg WWDG_IT_EWI: Early wakeup interrupt
+ * @note Once enabled this interrupt cannot be disabled except by a system reset.
+ * @retval None
+ */
+#define __HAL_WWDG_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CFR |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the WWDG early wakeup interrupt.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the interrupt to disable.
+ * This parameter can be one of the following values:
+ * @arg WWDG_IT_EWI: Early wakeup interrupt
+ * @note WARNING: This is a dummy macro for HAL code alignment.
+ * Once enabled this interrupt cannot be disabled except by a system reset.
+ * @retval None
+ */
+#define __HAL_WWDG_DISABLE_IT(__HANDLE__, __INTERRUPT__) /* dummy macro */
+
+/**
+ * @brief Gets the selected WWDG's it status.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the it to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt IT
+ * @retval The new state of WWDG_FLAG (SET or RESET).
+ */
+#define __HAL_WWDG_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR & (__INTERRUPT__)) == (__INTERRUPT__))
+
+/** @brief Clear the WWDG's interrupt pending bits
+ * bits to clear the selected interrupt pending bits.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ */
+#define __HAL_WWDG_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
/**
* @brief Gets the selected WWDG's flag status.
@@ -211,7 +244,7 @@
* @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
* @retval The new state of WWDG_FLAG (SET or RESET).
*/
-#define __HAL_WWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+#define __HAL_WWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
/**
* @brief Clears the WWDG's pending flags.
@@ -221,26 +254,16 @@
* @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
* @retval None
*/
-#define __HAL_WWDG_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__))
+#define __HAL_WWDG_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
-/**
- * @brief Enables the WWDG early wakeup interrupt.
- * @param __INTERRUPT__: specifies the interrupt to enable.
- * This parameter can be one of the following values:
- * @arg WWDG_IT_EWI: Early wakeup interrupt
- * @note Once enabled this interrupt cannot be disabled except by a system reset.
- * @retval None
+/** @brief Checks if the specified WWDG interrupt source is enabled or disabled.
+ * @param __HANDLE__: WWDG Handle.
+ * @param __INTERRUPT__: specifies the WWDG interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_IT_EWI: Early Wakeup Interrupt
+ * @retval state of __INTERRUPT__ (TRUE or FALSE).
*/
-#define __HAL_WWDG_ENABLE_IT(__INTERRUPT__) (*(__IO uint32_t *) CFR_BASE |= (__INTERRUPT__))
-
-/** @brief Clear the WWDG's interrupt pending bits
- * bits to clear the selected interrupt pending bits.
- * @param __HANDLE__: WWDG handle
- * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
- * This parameter can be one of the following values:
- * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
- */
-#define __HAL_WWDG_CLEAR_IT(__HANDLE__, __INTERRUPT__) __HAL_WWDG_CLEAR_FLAG((__HANDLE__), (__INTERRUPT__))
+#define __HAL_WWDG_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CFR & (__INTERRUPT__)) == (__INTERRUPT__))
/**
* @}
--- a/TARGET_NUCLEO_F091RC/system_stm32f0xx.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F091RC/system_stm32f0xx.h Tue Feb 03 15:31:20 2015 +0000 @@ -2,8 +2,8 @@ ****************************************************************************** * @file system_stm32f0xx.h * @author MCD Application Team - * @version V2.1.0 - * @date 03-Oct-2014 + * @version V2.2.0 + * @date 05-December-2014 * @brief CMSIS Cortex-M0 Device System Source File for STM32F0xx devices. ****************************************************************************** * @attention
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_F103RB/TARGET_STM/TARGET_NUCLEO_F103RB/PeripheralPins.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,62 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_PERIPHERALPINS_H +#define MBED_PERIPHERALPINS_H + +#include "pinmap.h" +#include "PeripheralNames.h" + +//*** ADC *** + +extern const PinMap PinMap_ADC[]; + +//*** I2C *** + +extern const PinMap PinMap_I2C_SDA[]; +extern const PinMap PinMap_I2C_SCL[]; + +//*** PWM *** + +extern const PinMap PinMap_PWM[]; + +//*** SERIAL *** + +extern const PinMap PinMap_UART_TX[]; +extern const PinMap PinMap_UART_RX[]; + +//*** SPI *** + +extern const PinMap PinMap_SPI_MOSI[]; +extern const PinMap PinMap_SPI_MISO[]; +extern const PinMap PinMap_SPI_SCLK[]; +extern const PinMap PinMap_SPI_SSEL[]; + +#endif
--- a/TARGET_NUCLEO_F103RB/TARGET_STM/TARGET_NUCLEO_F103RB/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F103RB/TARGET_STM/TARGET_NUCLEO_F103RB/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -64,6 +64,11 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
+
#ifdef __cplusplus
}
#endif
--- a/TARGET_NUCLEO_F103RB/TARGET_STM/TARGET_NUCLEO_F103RB/objects.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F103RB/TARGET_STM/TARGET_NUCLEO_F103RB/objects.h Tue Feb 03 15:31:20 2015 +0000
@@ -43,6 +43,7 @@
IRQn_Type irq_n;
uint32_t irq_index;
uint32_t event;
+ PinName pin;
};
struct port_s {
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/misc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/startup_stm32f10x_md.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_adc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_bkp.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_can.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_cec.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_crc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_dac.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_dbgmcu.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_dma.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_exti.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_flash.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_fsmc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_gpio.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_i2c.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_iwdg.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_pwr.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_rcc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_rtc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_sdio.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_spi.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_tim.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_usart.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/stm32f10x_wwdg.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_MICRO/system_stm32f10x.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/misc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/startup_stm32f10x_md.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_adc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_bkp.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_can.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_cec.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_crc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_dac.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_dbgmcu.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_dma.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_exti.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_flash.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_fsmc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_gpio.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_i2c.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_iwdg.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_pwr.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_rcc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_rtc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_sdio.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_spi.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_tim.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_usart.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/stm32f10x_wwdg.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_ARM_STD/system_stm32f10x.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/STM32F10X.ld Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,149 @@
+/* Linker script for STM32F103XXX */
+
+/* Linker script to configure memory regions. */
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 128K
+ RAM (rwx) : ORIGIN = 0x200000EC, LENGTH = 20K - 0xEC /* First 236 bytes (0xEC) of RAM are reserved for ISR Vectors */
+}
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.isr_vector))
+ *(.text*)
+
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ KEEP(*(.jcr*))
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+
+ } > RAM
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start__ = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ } > RAM
+
+ .heap (COPY):
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy (COPY):
+ {
+ *(.stack*)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
+
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/misc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/startup_stm32f10x.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/stm32f10x_adc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/stm32f10x_bkp.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/stm32f10x_can.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/stm32f10x_cec.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/stm32f10x_crc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/stm32f10x_dac.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/stm32f10x_dbgmcu.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/stm32f10x_dma.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/stm32f10x_exti.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/stm32f10x_flash.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/stm32f10x_fsmc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/stm32f10x_gpio.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/stm32f10x_i2c.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/stm32f10x_iwdg.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/stm32f10x_pwr.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/stm32f10x_rcc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/stm32f10x_rtc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/stm32f10x_sdio.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/stm32f10x_spi.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/stm32f10x_tim.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/stm32f10x_usart.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/stm32f10x_wwdg.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_GCC_ARM/system_stm32f10x.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/misc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/startup_stm32f10x_md.o has changed
--- a/TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f10x.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f10x.icf Tue Feb 03 15:31:20 2015 +0000
@@ -6,11 +6,13 @@
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF;
-define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_NVIC_start__ = 0x20000000;
+define symbol __ICFEDIT_region_NVIC_end__ = 0x200000EB;
+define symbol __ICFEDIT_region_RAM_start__ = 0x200000EC;
define symbol __ICFEDIT_region_RAM_end__ = 0x20004FFF;
/*-Sizes-*/
-define symbol __ICFEDIT_size_cstack__ = 0x800;
-define symbol __ICFEDIT_size_heap__ = 0x800;
+define symbol __ICFEDIT_size_cstack__ = 0x1000;
+define symbol __ICFEDIT_size_heap__ = 0x1700;
/**** End of ICF editor section. ###ICF###*/
define memory mem with size = 4G;
@@ -27,4 +29,4 @@
place in ROM_region { readonly };
place in RAM_region { readwrite,
- block CSTACK, block HEAP };
\ No newline at end of file
+ block HEAP, block CSTACK };
\ No newline at end of file
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f10x_adc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f10x_bkp.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f10x_can.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f10x_cec.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f10x_crc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f10x_dac.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f10x_dbgmcu.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f10x_dma.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f10x_exti.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f10x_flash.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f10x_fsmc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f10x_gpio.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f10x_i2c.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f10x_iwdg.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f10x_pwr.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f10x_rcc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f10x_rtc.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f10x_sdio.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f10x_spi.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f10x_tim.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f10x_usart.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/stm32f10x_wwdg.o has changed
Binary file TARGET_NUCLEO_F103RB/TOOLCHAIN_IAR/system_stm32f10x.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_F302R8/TARGET_STM/TARGET_NUCLEO_F302R8/PeripheralPins.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,66 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_PERIPHERALPINS_H +#define MBED_PERIPHERALPINS_H + +#include "pinmap.h" +#include "PeripheralNames.h" + +//*** ADC *** + +extern const PinMap PinMap_ADC[]; + +//*** DAC *** + +extern const PinMap PinMap_DAC[]; + +//*** I2C *** + +extern const PinMap PinMap_I2C_SDA[]; +extern const PinMap PinMap_I2C_SCL[]; + +//*** PWM *** + +extern const PinMap PinMap_PWM[]; + +//*** SERIAL *** + +extern const PinMap PinMap_UART_TX[]; +extern const PinMap PinMap_UART_RX[]; + +//*** SPI *** + +extern const PinMap PinMap_SPI_MOSI[]; +extern const PinMap PinMap_SPI_MISO[]; +extern const PinMap PinMap_SPI_SCLK[]; +extern const PinMap PinMap_SPI_SSEL[]; + +#endif
--- a/TARGET_NUCLEO_F302R8/TARGET_STM/TARGET_NUCLEO_F302R8/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F302R8/TARGET_STM/TARGET_NUCLEO_F302R8/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -64,6 +64,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/startup_stm32f302x8.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_hrtim.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_sdadc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_MICRO/system_stm32f3xx.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/startup_stm32f302x8.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_hrtim.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_sdadc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/stm32f3xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_ARM_STD/system_stm32f3xx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/STM32F302X8.ld Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,155 @@
+/* Linker script to configure memory regions. */
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64K
+ RAM (xrw) : ORIGIN = 0x20000188, LENGTH = 16K - 0x188
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ * _estack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.isr_vector))
+ *(.text*)
+
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+ _sidata = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ _sdata = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ KEEP(*(.jcr*))
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+ _edata = .;
+
+ } > RAM
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start__ = .;
+ _sbss = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ _ebss = .;
+ } > RAM
+
+ .heap (COPY):
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy (COPY):
+ {
+ *(.stack*)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ _estack = __StackTop;
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
+
--- a/TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/STM32F302X8_FLASH.ld Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,167 +0,0 @@
-/*
-*****************************************************************************
-**
-** File : STM32F302X8_FLASH.ld
-**
-** Abstract : Linker script for STM32F302x8 device with
-** 64-KByte FLASH, 16-KByte RAM
-**
-** Set heap size, stack size and stack location according
-** to application requirements.
-**
-** Set memory bank area and size if external memory is used.
-**
-** Target : STMicroelectronics STM32
-**
-** Environment : Atollic TrueSTUDIO(R)
-**
-** Distribution: The file is distributed as is, without any warranty
-** of any kind.
-**
-** (c)Copyright Atollic AB.
-** You may use this file as-is or modify it according to the needs of your
-** project. This file may only be built (assembled or compiled and linked)
-** using the Atollic TrueSTUDIO(R) product. The use of this file together
-** with other tools than Atollic TrueSTUDIO(R) is not permitted.
-**
-*****************************************************************************
-*/
-
-/* Entry Point */
-ENTRY(Reset_Handler)
-
-/* Highest address of the user mode stack */
-_estack = 0x20003FFF; /* end of RAM */
-
-/* Generate a link error if heap and stack don't fit into RAM */
-_Min_Heap_Size = 0x200; /* required amount of heap */
-_Min_Stack_Size = 0x400; /* required amount of stack */
-
-/* Specify the memory areas */
-MEMORY
-{
-FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64K
-RAM (xrw) : ORIGIN = 0x20000188, LENGTH = 16K - 0x188
-}
-
-/* Define output sections */
-SECTIONS
-{
- /* The startup code goes first into FLASH */
- .isr_vector :
- {
- . = ALIGN(4);
- KEEP(*(.isr_vector)) /* Startup code */
- . = ALIGN(4);
- } >FLASH
-
- /* The program code and other data goes into FLASH */
- .text :
- {
- . = ALIGN(4);
- *(.text) /* .text sections (code) */
- *(.text*) /* .text* sections (code) */
- *(.glue_7) /* glue arm to thumb code */
- *(.glue_7t) /* glue thumb to arm code */
- *(.eh_frame)
-
- KEEP (*(.init))
- KEEP (*(.fini))
-
- . = ALIGN(4);
- _etext = .; /* define a global symbols at end of code */
- } >FLASH
-
- /* Constant data goes into FLASH */
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata) /* .rodata sections (constants, strings, etc.) */
- *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
- . = ALIGN(4);
- } >FLASH
-
- .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
- .ARM : {
- __exidx_start = .;
- *(.ARM.exidx*)
- __exidx_end = .;
- } >FLASH
-
- .preinit_array :
- {
- PROVIDE_HIDDEN (__preinit_array_start = .);
- KEEP (*(.preinit_array*))
- PROVIDE_HIDDEN (__preinit_array_end = .);
- } >FLASH
- .init_array :
- {
- PROVIDE_HIDDEN (__init_array_start = .);
- KEEP (*(SORT(.init_array.*)))
- KEEP (*(.init_array*))
- PROVIDE_HIDDEN (__init_array_end = .);
- } >FLASH
- .fini_array :
- {
- PROVIDE_HIDDEN (__fini_array_start = .);
- KEEP (*(SORT(.fini_array.*)))
- KEEP (*(.fini_array*))
- PROVIDE_HIDDEN (__fini_array_end = .);
- } >FLASH
-
- /* used by the startup to initialize data */
- _sidata = LOADADDR(.data);
-
- /* Initialized data sections goes into RAM, load LMA copy after code */
- .data :
- {
- . = ALIGN(4);
- _sdata = .; /* create a global symbol at data start */
- *(.data) /* .data sections */
- *(.data*) /* .data* sections */
-
- . = ALIGN(4);
- _edata = .; /* define a global symbol at data end */
- } >RAM AT> FLASH
-
-
- /* Uninitialized data section */
- . = ALIGN(4);
- .bss :
- {
- /* This is used by the startup in order to initialize the .bss secion */
- _sbss = .; /* define a global symbol at bss start */
- __bss_start__ = _sbss;
- *(.bss)
- *(.bss*)
- *(COMMON)
-
- . = ALIGN(4);
- _ebss = .; /* define a global symbol at bss end */
- __bss_end__ = _ebss;
- } >RAM
-
- /* User_heap_stack section, used to check that there is enough RAM left */
- ._user_heap_stack :
- {
- . = ALIGN(4);
- PROVIDE ( end = . );
- PROVIDE ( _end = . );
- PROVIDE ( __end__ = . );
- . = . + _Min_Heap_Size;
- . = . + _Min_Stack_Size;
- . = ALIGN(4);
- } >RAM
-
-
-
- /* Remove information from the standard libraries */
- /DISCARD/ :
- {
- libc.a ( * )
- libm.a ( * )
- libgcc.a ( * )
- }
-
- .ARM.attributes 0 : { *(.ARM.attributes) }
-}
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/hal_tick.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/startup_stm32f302x8.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_hrtim.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_sdadc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/stm32f3xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_GCC_ARM/system_stm32f3xx.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/startup_stm32f302x8.o has changed
--- a/TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f302x8.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f302x8.icf Tue Feb 03 15:31:20 2015 +0000
@@ -5,8 +5,8 @@
/* [RAM = 16kb = 0x4000] Vector table dynamic copy: 98 vectors = 392 bytes (0x188) to be reserved in RAM */
define symbol __NVIC_start__ = 0x20000000;
-define symbol __NVIC_end__ = 0x20000191; /* Add 4 more bytes to be aligned on 8 bytes */
-define symbol __region_RAM_start__ = 0x20000192;
+define symbol __NVIC_end__ = 0x20000187; /*aligned on 8 bytes */
+define symbol __region_RAM_start__ = 0x20000188;
define symbol __region_RAM_end__ = 0x20003FFF;
/* Memory regions */
@@ -15,8 +15,8 @@
define region RAM_region = mem:[from __region_RAM_start__ to __region_RAM_end__];
/* Stack and Heap */
-define symbol __size_cstack__ = 0x400;
-define symbol __size_heap__ = 0x400;
+define symbol __size_cstack__ = 0x1000;
+define symbol __size_heap__ = 0x1700;
define block CSTACK with alignment = 8, size = __size_cstack__ { };
define block HEAP with alignment = 8, size = __size_heap__ { };
define block STACKHEAP with fixed order { block HEAP, block CSTACK };
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_hrtim.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_sdadc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/stm32f3xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F302R8/TOOLCHAIN_IAR/system_stm32f3xx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/TARGET_STM/TARGET_NUCLEO_F303RE/PeripheralNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,87 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE,
+ ADC_2 = (int)ADC2_BASE
+} ADCName;
+
+typedef enum {
+ DAC_1 = (int)DAC_BASE
+} DACName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE,
+ UART_3 = (int)USART3_BASE,
+ UART_4 = (int)UART4_BASE,
+ UART_5 = (int)UART5_BASE
+} UARTName;
+
+#define STDIO_UART_TX PA_2
+#define STDIO_UART_RX PA_3
+#define STDIO_UART UART_2
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE,
+ SPI_3 = (int)SPI3_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE,
+ I2C_3 = (int)I2C3_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_2 = (int)TIM2_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_4 = (int)TIM4_BASE,
+ PWM_8 = (int)TIM8_BASE,
+ PWM_15 = (int)TIM15_BASE,
+ PWM_16 = (int)TIM16_BASE,
+ PWM_17 = (int)TIM17_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_F303RE/TARGET_STM/TARGET_NUCLEO_F303RE/PeripheralPins.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,66 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_PERIPHERALPINS_H +#define MBED_PERIPHERALPINS_H + +#include "pinmap.h" +#include "PeripheralNames.h" + +//*** ADC *** + +extern const PinMap PinMap_ADC[]; + +//*** DAC *** + +extern const PinMap PinMap_DAC[]; + +//*** I2C *** + +extern const PinMap PinMap_I2C_SDA[]; +extern const PinMap PinMap_I2C_SCL[]; + +//*** PWM *** + +extern const PinMap PinMap_PWM[]; + +//*** SERIAL *** + +extern const PinMap PinMap_UART_TX[]; +extern const PinMap PinMap_UART_RX[]; + +//*** SPI *** + +extern const PinMap PinMap_SPI_MOSI[]; +extern const PinMap PinMap_SPI_MISO[]; +extern const PinMap PinMap_SPI_SCLK[]; +extern const PinMap PinMap_SPI_SSEL[]; + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/TARGET_STM/TARGET_NUCLEO_F303RE/PinNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,183 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f3xx_hal_gpio.h and stm32f3xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_11 = 0x1B,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_2 = 0x32,
+
+ PF_0 = 0x50,
+ PF_1 = 0x51,
+
+ // Arduino connector namings
+ A0 = PA_0,
+ A1 = PA_1,
+ A2 = PA_4,
+ A3 = PB_0,
+ A4 = PC_1,
+ A5 = PC_0,
+ D0 = PA_3,
+ D1 = PA_2,
+ D2 = PA_10,
+ D3 = PB_3,
+ D4 = PB_5,
+ D5 = PB_4,
+ D6 = PB_10,
+ D7 = PA_8,
+ D8 = PA_9,
+ D9 = PC_7,
+ D10 = PB_6,
+ D11 = PA_7,
+ D12 = PA_6,
+ D13 = PA_5,
+ D14 = PB_9,
+ D15 = PB_8,
+
+ // Generic signals namings
+ LED1 = PA_5,
+ LED2 = PA_5,
+ LED3 = PA_5,
+ LED4 = PA_5,
+ USER_BUTTON = PC_13,
+ SERIAL_TX = PA_2,
+ SERIAL_RX = PA_3,
+ USBTX = PA_2,
+ USBRX = PA_3,
+ I2C_SCL = PB_8,
+ I2C_SDA = PB_9,
+ SPI_MOSI = PA_7,
+ SPI_MISO = PA_6,
+ SPI_SCK = PA_5,
+ SPI_CS = PB_6,
+ PWM_OUT = PB_4,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/TARGET_STM/TARGET_NUCLEO_F303RE/PortNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,48 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortF = 5
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_F303RE/TARGET_STM/TARGET_NUCLEO_F303RE/device.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,70 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 1 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/TARGET_STM/TARGET_NUCLEO_F303RE/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,75 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_GPIO_OBJECT_H
+#define MBED_GPIO_OBJECT_H
+
+#include "mbed_assert.h"
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ uint32_t mask;
+ __IO uint32_t *reg_in;
+ __IO uint16_t *reg_set;
+ __IO uint16_t *reg_clr;
+} gpio_t;
+
+static inline void gpio_write(gpio_t *obj, int value)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ if (value) {
+ *obj->reg_set = obj->mask;
+ } else {
+ *obj->reg_clr = obj->mask;
+ }
+}
+
+static inline int gpio_read(gpio_t *obj)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ return ((*obj->reg_in & obj->mask) ? 1 : 0);
+}
+
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/TARGET_STM/TARGET_NUCLEO_F303RE/objects.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,110 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+};
+
+struct dac_s {
+ DACName dac;
+ PinName pin;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index; // Used by irq
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+ uint32_t slave;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t period;
+ uint32_t pulse;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/startup_stm32f303xe.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f303xe.sct Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,45 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2014, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32F303RE: 512KB FLASH (0x80000) + 64KB SRAM (0x10000)
+LR_IROM1 0x08000000 0x80000 { ; load region size_region
+
+ ER_IROM1 0x08000000 0x80000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; 101 vectors = 404 bytes (0x194) to be reserved in RAM
+ RW_IRAM1 (0x20000000+0x194) (0x10000-0x194) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+}
+
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_hrtim.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_sdadc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/stm32f3xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_MICRO/system_stm32f3xx.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/startup_stm32f303xe.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f303xe.sct Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,45 @@
+; Scatter-Loading Description File
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Copyright (c) 2014, STMicroelectronics
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; 1. Redistributions of source code must retain the above copyright notice,
+; this list of conditions and the following disclaimer.
+; 2. Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+; 3. Neither the name of STMicroelectronics nor the names of its contributors
+; may be used to endorse or promote products derived from this software
+; without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; STM32F303RE: 512KB FLASH (0x80000) + 64KB SRAM (0x10000)
+LR_IROM1 0x08000000 0x80000 { ; load region size_region
+
+ ER_IROM1 0x08000000 0x80000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+
+ ; 101 vectors = 404 bytes (0x194) to be reserved in RAM
+ RW_IRAM1 (0x20000000+0x194) (0x10000-0x194) { ; RW data
+ .ANY (+RW +ZI)
+ }
+
+}
+
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_hrtim.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_sdadc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/system_stm32f3xx.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/startup_stm32f303xe.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f303xe.icf Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,34 @@
+/* [ROM = 512kb = 0x80000] */
+define symbol __intvec_start__ = 0x08000000;
+define symbol __region_ROM_start__ = 0x08000000;
+define symbol __region_ROM_end__ = 0x0807FFFF;
+
+define symbol __region_CCMRAM_start__ = 0x10000000;
+define symbol __region_CCMRAM_end__ = 0x10003FFF;
+
+/* [RAM = 64kb = 0x10000] Vector table dynamic copy: 101 vectors = 404 bytes (0x194) to be reserved in RAM */
+define symbol __NVIC_start__ = 0x20000000;
+define symbol __NVIC_end__ = 0x20000197; /* Add 4 more bytes to be aligned on 8 bytes */
+define symbol __region_RAM_start__ = 0x20000198;
+define symbol __region_RAM_end__ = 0x2000FFFF;
+
+/* Memory regions */
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __region_ROM_start__ to __region_ROM_end__];
+define region RAM_region = mem:[from __region_RAM_start__ to __region_RAM_end__];
+define region CCMRAM_region = mem:[from __region_CCMRAM_start__ to __region_CCMRAM_end__];
+
+/* Stack and Heap */
+define symbol __size_cstack__ = 0x2000;
+define symbol __size_heap__ = 0x2000;
+define block CSTACK with alignment = 8, size = __size_cstack__ { };
+define block HEAP with alignment = 8, size = __size_heap__ { };
+define block STACKHEAP with fixed order { block HEAP, block CSTACK };
+
+initialize by copy with packing = zeros { readwrite };
+do not initialize { section .noinit };
+
+place at address mem:__intvec_start__ { readonly section .intvec };
+
+place in ROM_region { readonly };
+place in RAM_region { readwrite, block STACKHEAP };
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_hrtim.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_sdadc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/system_stm32f3xx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_F303RE/cmsis.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,38 @@ +/* mbed Microcontroller Library + * A generic CMSIS include header + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_CMSIS_H +#define MBED_CMSIS_H + +#include "stm32f3xx.h" +#include "cmsis_nvic.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/cmsis_nvic.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,55 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+// STM32F303RE
+// CORE: 16 vectors = 64 bytes from 0x00 to 0x3F
+// MCU Peripherals: 85 vectors = 340 bytes from 0x40 to 0x193
+// Total: 101 vectors = 404 bytes (0x194) to be reserved in RAM
+#define NVIC_NUM_VECTORS 101
+#define NVIC_USER_IRQ_OFFSET 16
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
+uint32_t NVIC_GetVector(IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/core_ca9.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,271 @@
+/**************************************************************************//**
+ * @file core_ca9.h
+ * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File
+ * @version
+ * @date 25 March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CA9_H_GENERIC
+#define __CORE_CA9_H_GENERIC
+
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_A9
+ @{
+ */
+
+/* CMSIS CA9 definitions */
+#define __CA9_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CA9_CMSIS_VERSION_SUB (0x10) /*!< [15:0] CMSIS HAL sub version */
+#define __CA9_CMSIS_VERSION ((__CA9_CMSIS_VERSION_MAIN << 16) | \
+ __CA9_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_A (0x09) /*!< Cortex-A Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /*!< standard types definitions */
+#include "core_caInstr.h" /*!< Core Instruction Access */
+#include "core_caFunc.h" /*!< Core Function Access */
+#include "core_cm4_simd.h" /*!< Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CA9_H_DEPENDANT
+#define __CORE_CA9_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CA9_REV
+ #define __CA9_REV 0x0000
+ #warning "__CA9_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 1
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 1
+ #endif
+
+ #if __Vendor_SysTickConfig == 0
+ #error "__Vendor_SysTickConfig set to 0, but vendor systick timer must be supplied for Cortex-A9"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_A9 */
+
+
+/*******************************************************************************
+ * Register Abstraction
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-A processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t reserved1:7; /*!< bit: 20..23 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/*@} end of group CMSIS_CORE */
+
+/*@} end of CMSIS_Core_FPUFunctions */
+
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/core_caFunc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,592 @@
+/**************************************************************************//**
+ * @file core_caFunc.h
+ * @brief CMSIS Cortex-A Core Function Access Header File
+ * @version V3.10
+ * @date 9 May 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CAFUNC_H__
+#define __CORE_CAFUNC_H__
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get CPSR Register
+
+ This function returns the content of the CPSR Register.
+
+ \return CPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_CPSR(void)
+{
+ register uint32_t __regCPSR __ASM("cpsr");
+ return(__regCPSR);
+}
+
+/** \brief Set Stack Pointer
+
+ This function assigns the given value to the current stack pointer.
+
+ \param [in] topOfStack Stack Pointer value to set
+ */
+register uint32_t __regSP __ASM("sp");
+__STATIC_INLINE void __set_SP(uint32_t topOfStack)
+{
+ __regSP = topOfStack;
+}
+
+
+/** \brief Get link register
+
+ This function returns the value of the link register
+
+ \return Value of link register
+ */
+register uint32_t __reglr __ASM("lr");
+__STATIC_INLINE uint32_t __get_LR(void)
+{
+ return(__reglr);
+}
+
+/** \brief Set link register
+
+ This function sets the value of the link register
+
+ \param [in] lr LR value to set
+ */
+__STATIC_INLINE void __set_LR(uint32_t lr)
+{
+ __reglr = lr;
+}
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_PSP(uint32_t topOfProcStack)
+{
+ ARM
+ PRESERVE8
+
+ BIC R0, R0, #7 ;ensure stack is 8-byte aligned
+ MRS R1, CPSR
+ CPS #MODE_SYS ;no effect in USR mode
+ MOV SP, R0
+ MSR CPSR_c, R1 ;no effect in USR mode
+ ISB
+ BX LR
+
+}
+
+/** \brief Set User Mode
+
+ This function changes the processor state to User Mode
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_CPS_USR(void)
+{
+ ARM
+
+ CPS #MODE_USR
+ BX LR
+}
+
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+/** \brief Get FPEXC
+
+ This function returns the current value of the Floating Point Exception Control register.
+
+ \return Floating Point Exception Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPEXC(void)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ return(__regfpexc);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPEXC
+
+ This function assigns the given value to the Floating Point Exception Control register.
+
+ \param [in] fpscr Floating Point Exception Control value to set
+ */
+__STATIC_INLINE void __set_FPEXC(uint32_t fpexc)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ __regfpexc = (fpexc);
+#endif
+}
+
+/** \brief Get CPACR
+
+ This function returns the current value of the Coprocessor Access Control register.
+
+ \return Coprocessor Access Control register value
+ */
+__STATIC_INLINE uint32_t __get_CPACR(void)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ return __regCPACR;
+}
+
+/** \brief Set CPACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] cpacr Coporcessor Acccess Control value to set
+ */
+__STATIC_INLINE void __set_CPACR(uint32_t cpacr)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ __regCPACR = cpacr;
+ __ISB();
+}
+
+/** \brief Get CBAR
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Configuration Base Address register value
+ */
+__STATIC_INLINE uint32_t __get_CBAR() {
+ register uint32_t __regCBAR __ASM("cp15:4:c15:c0:0");
+ return(__regCBAR);
+}
+
+/** \brief Get TTBR0
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Translation Table Base Register 0 value
+ */
+__STATIC_INLINE uint32_t __get_TTBR0() {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ return(__regTTBR0);
+}
+
+/** \brief Set TTBR0
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] ttbr0 Translation Table Base Register 0 value to set
+ */
+__STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ __regTTBR0 = ttbr0;
+ __ISB();
+}
+
+/** \brief Get DACR
+
+ This function returns the value of the Domain Access Control Register.
+
+ \return Domain Access Control Register value
+ */
+__STATIC_INLINE uint32_t __get_DACR() {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ return(__regDACR);
+}
+
+/** \brief Set DACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] dacr Domain Access Control Register value to set
+ */
+__STATIC_INLINE void __set_DACR(uint32_t dacr) {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ __regDACR = dacr;
+ __ISB();
+}
+
+/******************************** Cache and BTAC enable ****************************************************/
+
+/** \brief Set SCTLR
+
+ This function assigns the given value to the System Control Register.
+
+ \param [in] sctlr System Control Register, value to set
+ */
+__STATIC_INLINE void __set_SCTLR(uint32_t sctlr)
+{
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ __regSCTLR = sctlr;
+}
+
+/** \brief Get SCTLR
+
+ This function returns the value of the System Control Register.
+
+ \return System Control Register value
+ */
+__STATIC_INLINE uint32_t __get_SCTLR() {
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ return(__regSCTLR);
+}
+
+/** \brief Enable Caches
+
+ Enable Caches
+ */
+__STATIC_INLINE void __enable_caches(void) {
+ // Set I bit 12 to enable I Cache
+ // Set C bit 2 to enable D Cache
+ __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief Disable Caches
+
+ Disable Caches
+ */
+__STATIC_INLINE void __disable_caches(void) {
+ // Clear I bit 12 to disable I Cache
+ // Clear C bit 2 to disable D Cache
+ __set_SCTLR( __get_SCTLR() & ~(1 << 12) & ~(1 << 2));
+ __ISB();
+}
+
+/** \brief Enable BTAC
+
+ Enable BTAC
+ */
+__STATIC_INLINE void __enable_btac(void) {
+ // Set Z bit 11 to enable branch prediction
+ __set_SCTLR( __get_SCTLR() | (1 << 11));
+ __ISB();
+}
+
+/** \brief Disable BTAC
+
+ Disable BTAC
+ */
+__STATIC_INLINE void __disable_btac(void) {
+ // Clear Z bit 11 to disable branch prediction
+ __set_SCTLR( __get_SCTLR() & ~(1 << 11));
+}
+
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __enable_mmu(void) {
+ // Set M bit 0 to enable the MMU
+ // Set AFE bit to enable simplified access permissions model
+ // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+ __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+ __ISB();
+}
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __disable_mmu(void) {
+ // Clear M bit 0 to disable the MMU
+ __set_SCTLR( __get_SCTLR() & ~1);
+ __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief Invalidate the whole tlb
+
+ TLBIALL. Invalidate the whole tlb
+ */
+
+__STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+ register uint32_t __TLBIALL __ASM("cp15:0:c8:c7:0");
+ __TLBIALL = 0;
+ __DSB();
+ __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief Invalidate entire branch predictor array
+
+ BPIALL. Branch Predictor Invalidate All.
+ */
+
+__STATIC_INLINE void __v7_inv_btac(void) {
+ register uint32_t __BPIALL __ASM("cp15:0:c7:c5:6");
+ __BPIALL = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief Invalidate the whole I$
+
+ ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+__STATIC_INLINE void __v7_inv_icache_all(void) {
+ register uint32_t __ICIALLU __ASM("cp15:0:c7:c5:0");
+ __ICIALLU = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new I cache state
+}
+
+/** \brief Clean D$ by MVA
+
+ DCCMVAC. Data cache clean by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_dcache_mva(void *va) {
+ register uint32_t __DCCMVAC __ASM("cp15:0:c7:c10:1");
+ __DCCMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Invalidate D$ by MVA
+
+ DCIMVAC. Data cache invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_inv_dcache_mva(void *va) {
+ register uint32_t __DCIMVAC __ASM("cp15:0:c7:c6:1");
+ __DCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Clean and Invalidate D$ by MVA
+
+ DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+ register uint32_t __DCCIMVAC __ASM("cp15:0:c7:c14:1");
+ __DCCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief
+ * Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency.
+ */
+#pragma push
+#pragma arm
+__STATIC_ASM void __v7_all_cache(uint32_t op) {
+ ARM
+
+ PUSH {R4-R11}
+
+ MRC p15, 1, R6, c0, c0, 1 // Read CLIDR
+ ANDS R3, R6, #0x07000000 // Extract coherency level
+ MOV R3, R3, LSR #23 // Total cache levels << 1
+ BEQ Finished // If 0, no need to clean
+
+ MOV R10, #0 // R10 holds current cache level << 1
+Loop1 ADD R2, R10, R10, LSR #1 // R2 holds cache "Set" position
+ MOV R1, R6, LSR R2 // Bottom 3 bits are the Cache-type for this level
+ AND R1, R1, #7 // Isolate those lower 3 bits
+ CMP R1, #2
+ BLT Skip // No cache or only instruction cache at this level
+
+ MCR p15, 2, R10, c0, c0, 0 // Write the Cache Size selection register
+ ISB // ISB to sync the change to the CacheSizeID reg
+ MRC p15, 1, R1, c0, c0, 0 // Reads current Cache Size ID register
+ AND R2, R1, #7 // Extract the line length field
+ ADD R2, R2, #4 // Add 4 for the line length offset (log2 16 bytes)
+ LDR R4, =0x3FF
+ ANDS R4, R4, R1, LSR #3 // R4 is the max number on the way size (right aligned)
+ CLZ R5, R4 // R5 is the bit position of the way size increment
+ LDR R7, =0x7FFF
+ ANDS R7, R7, R1, LSR #13 // R7 is the max number of the index size (right aligned)
+
+Loop2 MOV R9, R4 // R9 working copy of the max way size (right aligned)
+
+Loop3 ORR R11, R10, R9, LSL R5 // Factor in the Way number and cache number into R11
+ ORR R11, R11, R7, LSL R2 // Factor in the Set number
+ CMP R0, #0
+ BNE Dccsw
+ MCR p15, 0, R11, c7, c6, 2 // DCISW. Invalidate by Set/Way
+ B cont
+Dccsw CMP R0, #1
+ BNE Dccisw
+ MCR p15, 0, R11, c7, c10, 2 // DCCSW. Clean by Set/Way
+ B cont
+Dccisw MCR p15, 0, R11, c7, c14, 2 // DCCISW, Clean and Invalidate by Set/Way
+cont SUBS R9, R9, #1 // Decrement the Way number
+ BGE Loop3
+ SUBS R7, R7, #1 // Decrement the Set number
+ BGE Loop2
+Skip ADD R10, R10, #2 // increment the cache number
+ CMP R3, R10
+ BGT Loop1
+
+Finished
+ DSB
+ POP {R4-R11}
+ BX lr
+
+}
+#pragma pop
+
+/** \brief __v7_all_cache - helper function
+
+ */
+
+/** \brief Invalidate the whole D$
+
+ DCISW. Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_inv_dcache_all(void) {
+ __v7_all_cache(0);
+}
+
+/** \brief Clean the whole D$
+
+ DCCSW. Clean by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_dcache_all(void) {
+ __v7_all_cache(1);
+}
+
+/** \brief Clean and invalidate the whole D$
+
+ DCCISW. Clean and Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_inv_dcache_all(void) {
+ __v7_all_cache(2);
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__ICCARM__)) /*---------------- ICC Compiler ---------------------*/
+
+#error IAR Compiler support not implemented for Cortex-A
+
+#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
+
+//#error GNU Compiler support not implemented for Cortex-A
+
+#elif (defined (__TASKING__)) /*--------------- TASKING Compiler -----------------*/
+
+#error TASKING Compiler support not implemented for Cortex-A
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CAFUNC_H__ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_F303RE/core_caInstr.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,45 @@ +/**************************************************************************//** + * @file core_caInstr.h + * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File + * @version + * @date 04. December 2012 + * + * @note + * + ******************************************************************************/ +/* Copyright (c) 2009 - 2012 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + +#ifndef __CORE_CAINSTR_H__ +#define __CORE_CAINSTR_H__ + +#define __CORTEX_M 0x3 +#include "core_cmInstr.h" +#undef __CORTEX_M + +#endif +
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/core_ca_mmu.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,848 @@
+;/**************************************************************************//**
+; * @file core_ca_mmu.h
+; * @brief MMU Startup File for
+; * VE_A9_MP Device Series
+; * @version V1.01
+; * @date 25 March 2013
+; *
+; * @note
+; *
+; ******************************************************************************/
+;/* Copyright (c) 2012 ARM LIMITED
+;
+; All rights reserved.
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+; - Redistributions of source code must retain the above copyright
+; notice, this list of conditions and the following disclaimer.
+; - Redistributions in binary form must reproduce the above copyright
+; notice, this list of conditions and the following disclaimer in the
+; documentation and/or other materials provided with the distribution.
+; - Neither the name of ARM nor the names of its contributors may be used
+; to endorse or promote products derived from this software without
+; specific prior written permission.
+; *
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+; ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+; LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+; CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+; SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+; INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+; CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+; ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+; POSSIBILITY OF SUCH DAMAGE.
+; ---------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef _MMU_FUNC_H
+#define _MMU_FUNC_H
+
+#define SECTION_DESCRIPTOR (0x2)
+#define SECTION_MASK (0xFFFFFFFC)
+
+#define SECTION_TEXCB_MASK (0xFFFF8FF3)
+#define SECTION_B_SHIFT (2)
+#define SECTION_C_SHIFT (3)
+#define SECTION_TEX0_SHIFT (12)
+#define SECTION_TEX1_SHIFT (13)
+#define SECTION_TEX2_SHIFT (14)
+
+#define SECTION_XN_MASK (0xFFFFFFEF)
+#define SECTION_XN_SHIFT (4)
+
+#define SECTION_DOMAIN_MASK (0xFFFFFE1F)
+#define SECTION_DOMAIN_SHIFT (5)
+
+#define SECTION_P_MASK (0xFFFFFDFF)
+#define SECTION_P_SHIFT (9)
+
+#define SECTION_AP_MASK (0xFFFF73FF)
+#define SECTION_AP_SHIFT (10)
+#define SECTION_AP2_SHIFT (15)
+
+#define SECTION_S_MASK (0xFFFEFFFF)
+#define SECTION_S_SHIFT (16)
+
+#define SECTION_NG_MASK (0xFFFDFFFF)
+#define SECTION_NG_SHIFT (17)
+
+#define SECTION_NS_MASK (0xFFF7FFFF)
+#define SECTION_NS_SHIFT (19)
+
+
+#define PAGE_L1_DESCRIPTOR (0x1)
+#define PAGE_L1_MASK (0xFFFFFFFC)
+
+#define PAGE_L2_4K_DESC (0x2)
+#define PAGE_L2_4K_MASK (0xFFFFFFFD)
+
+#define PAGE_L2_64K_DESC (0x1)
+#define PAGE_L2_64K_MASK (0xFFFFFFFC)
+
+#define PAGE_4K_TEXCB_MASK (0xFFFFFE33)
+#define PAGE_4K_B_SHIFT (2)
+#define PAGE_4K_C_SHIFT (3)
+#define PAGE_4K_TEX0_SHIFT (6)
+#define PAGE_4K_TEX1_SHIFT (7)
+#define PAGE_4K_TEX2_SHIFT (8)
+
+#define PAGE_64K_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_64K_B_SHIFT (2)
+#define PAGE_64K_C_SHIFT (3)
+#define PAGE_64K_TEX0_SHIFT (12)
+#define PAGE_64K_TEX1_SHIFT (13)
+#define PAGE_64K_TEX2_SHIFT (14)
+
+#define PAGE_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_B_SHIFT (2)
+#define PAGE_C_SHIFT (3)
+#define PAGE_TEX_SHIFT (12)
+
+#define PAGE_XN_4K_MASK (0xFFFFFFFE)
+#define PAGE_XN_4K_SHIFT (0)
+#define PAGE_XN_64K_MASK (0xFFFF7FFF)
+#define PAGE_XN_64K_SHIFT (15)
+
+
+#define PAGE_DOMAIN_MASK (0xFFFFFE1F)
+#define PAGE_DOMAIN_SHIFT (5)
+
+#define PAGE_P_MASK (0xFFFFFDFF)
+#define PAGE_P_SHIFT (9)
+
+#define PAGE_AP_MASK (0xFFFFFDCF)
+#define PAGE_AP_SHIFT (4)
+#define PAGE_AP2_SHIFT (9)
+
+#define PAGE_S_MASK (0xFFFFFBFF)
+#define PAGE_S_SHIFT (10)
+
+#define PAGE_NG_MASK (0xFFFFF7FF)
+#define PAGE_NG_SHIFT (11)
+
+#define PAGE_NS_MASK (0xFFFFFFF7)
+#define PAGE_NS_SHIFT (3)
+
+#define OFFSET_1M (0x00100000)
+#define OFFSET_64K (0x00010000)
+#define OFFSET_4K (0x00001000)
+
+#define DESCRIPTOR_FAULT (0x00000000)
+
+/* ########################### MMU Function Access ########################### */
+/** \ingroup MMU_FunctionInterface
+ \defgroup MMU_Functions MMU Functions Interface
+ @{
+ */
+
+/* Attributes enumerations */
+
+/* Region size attributes */
+typedef enum
+{
+ SECTION,
+ PAGE_4k,
+ PAGE_64k,
+} mmu_region_size_Type;
+
+/* Region type attributes */
+typedef enum
+{
+ NORMAL,
+ DEVICE,
+ SHARED_DEVICE,
+ NON_SHARED_DEVICE,
+ STRONGLY_ORDERED
+} mmu_memory_Type;
+
+/* Region cacheability attributes */
+typedef enum
+{
+ NON_CACHEABLE,
+ WB_WA,
+ WT,
+ WB_NO_WA,
+} mmu_cacheability_Type;
+
+/* Region parity check attributes */
+typedef enum
+{
+ ECC_DISABLED,
+ ECC_ENABLED,
+} mmu_ecc_check_Type;
+
+/* Region execution attributes */
+typedef enum
+{
+ EXECUTE,
+ NON_EXECUTE,
+} mmu_execute_Type;
+
+/* Region global attributes */
+typedef enum
+{
+ GLOBAL,
+ NON_GLOBAL,
+} mmu_global_Type;
+
+/* Region shareability attributes */
+typedef enum
+{
+ NON_SHARED,
+ SHARED,
+} mmu_shared_Type;
+
+/* Region security attributes */
+typedef enum
+{
+ SECURE,
+ NON_SECURE,
+} mmu_secure_Type;
+
+/* Region access attributes */
+typedef enum
+{
+ NO_ACCESS,
+ RW,
+ READ,
+} mmu_access_Type;
+
+/* Memory Region definition */
+typedef struct RegionStruct {
+ mmu_region_size_Type rg_t;
+ mmu_memory_Type mem_t;
+ uint8_t domain;
+ mmu_cacheability_Type inner_norm_t;
+ mmu_cacheability_Type outer_norm_t;
+ mmu_ecc_check_Type e_t;
+ mmu_execute_Type xn_t;
+ mmu_global_Type g_t;
+ mmu_secure_Type sec_t;
+ mmu_access_Type priv_t;
+ mmu_access_Type user_t;
+ mmu_shared_Type sh_t;
+
+} mmu_region_attributes_Type;
+
+/** \brief Set section execution-never attribute
+
+ The function sets section execution-never attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] xn Section execution-never attribute : EXECUTE , NON_EXECUTE.
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_section(uint32_t *descriptor_l1, mmu_execute_Type xn)
+{
+ *descriptor_l1 &= SECTION_XN_MASK;
+ *descriptor_l1 |= ((xn & 0x1) << SECTION_XN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section domain
+
+ The function sets section domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Section domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_section(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= SECTION_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xF) << SECTION_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section parity check
+
+ The function sets section parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_section(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set section access privileges
+
+ The function sets section access privileges
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_section(uint32_t *descriptor_l1, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x6; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l1 &= SECTION_AP_MASK;
+ *descriptor_l1 |= (ap & 0x3) << SECTION_AP_SHIFT;
+ *descriptor_l1 |= ((ap & 0x4)>>2) << SECTION_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set section shareability
+
+ The function sets section shareability
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_section(uint32_t *descriptor_l1, mmu_shared_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_S_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Global attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] g_bit Section attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_section(uint32_t *descriptor_l1, mmu_global_Type g_bit)
+{
+ *descriptor_l1 &= SECTION_NG_MASK;
+ *descriptor_l1 |= ((g_bit & 0x1) << SECTION_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Security attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_section(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_NS_SHIFT);
+ return 0;
+}
+
+/* Page 4k or 64k */
+/** \brief Set 4k/64k page execution-never attribute
+
+ The function sets 4k/64k page execution-never attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] xn Page execution-never attribute : EXECUTE , NON_EXECUTE.
+ \param [in] page Page size: PAGE_4k, PAGE_64k,
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_page(uint32_t *descriptor_l2, mmu_execute_Type xn, mmu_region_size_Type page)
+{
+ if (page == PAGE_4k)
+ {
+ *descriptor_l2 &= PAGE_XN_4K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_4K_SHIFT);
+ }
+ else
+ {
+ *descriptor_l2 &= PAGE_XN_64K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_64K_SHIFT);
+ }
+ return 0;
+}
+
+/** \brief Set 4k/64k page domain
+
+ The function sets 4k/64k page domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Page domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_page(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= PAGE_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xf) << PAGE_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page parity check
+
+ The function sets 4k/64k page parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_page(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page access privileges
+
+ The function sets 4k/64k page access privileges
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_page(uint32_t *descriptor_l2, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x6; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l2 &= PAGE_AP_MASK;
+ *descriptor_l2 |= (ap & 0x3) << PAGE_AP_SHIFT;
+ *descriptor_l2 |= ((ap & 0x4)>>2) << PAGE_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page shareability
+
+ The function sets 4k/64k page shareability
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] s_bit 4k/64k page shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_page(uint32_t *descriptor_l2, mmu_shared_Type s_bit)
+{
+ *descriptor_l2 &= PAGE_S_MASK;
+ *descriptor_l2 |= ((s_bit & 0x1) << PAGE_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Global attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] g_bit 4k/64k page attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_page(uint32_t *descriptor_l2, mmu_global_Type g_bit)
+{
+ *descriptor_l2 &= PAGE_NG_MASK;
+ *descriptor_l2 |= ((g_bit & 0x1) << PAGE_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Security attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit 4k/64k page Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_page(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= PAGE_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << PAGE_NS_SHIFT);
+ return 0;
+}
+
+
+/** \brief Set Section memory attributes
+
+ The function sets section memory attributes
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] mem Section memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_section(uint32_t *descriptor_l1, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner)
+{
+ *descriptor_l1 &= SECTION_TEXCB_MASK;
+
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l1 |= 1 << SECTION_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT) | (1 << SECTION_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT) | (1 << SECTION_TEX0_SHIFT);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page memory attributes
+
+ The function sets 4k/64k page memory attributes
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] mem 4k/64k page memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_page(uint32_t *descriptor_l2, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner, mmu_region_size_Type page)
+{
+ *descriptor_l2 &= PAGE_4K_TEXCB_MASK;
+
+ if (page == PAGE_64k)
+ {
+ //same as section
+ __memory_section(descriptor_l2, mem, outer, inner);
+ }
+ else
+ {
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l2 |= 1 << PAGE_4K_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT) | (1 << PAGE_4K_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT) | (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Create a L1 section descriptor
+
+ The function creates a section descriptor.
+
+ Assumptions:
+ - 16MB super sections not suported
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg Section attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_section_descriptor(uint32_t *descriptor, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+
+ __memory_section(descriptor, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t);
+ __xn_section(descriptor,reg.xn_t);
+ __domain_section(descriptor, reg.domain);
+ __p_section(descriptor, reg.e_t);
+ __ap_section(descriptor, reg.priv_t, reg.user_t, 1);
+ __shared_section(descriptor,reg.sh_t);
+ __global_section(descriptor,reg.g_t);
+ __secure_section(descriptor,reg.sec_t);
+ *descriptor &= SECTION_MASK;
+ *descriptor |= SECTION_DESCRIPTOR;
+
+ return 0;
+
+}
+
+
+/** \brief Create a L1 and L2 4k/64k page descriptor
+
+ The function creates a 4k/64k page descriptor.
+ Assumptions:
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg 4k/64k page attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_page_descriptor(uint32_t *descriptor, uint32_t *descriptor2, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+ *descriptor2 = 0;
+
+ switch (reg.rg_t)
+ {
+ case PAGE_4k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_4k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_4k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_4K_MASK;
+ *descriptor2 |= PAGE_L2_4K_DESC;
+ break;
+
+ case PAGE_64k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_64k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_64k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_64K_MASK;
+ *descriptor2 |= PAGE_L2_64K_DESC;
+ break;
+
+ case SECTION:
+ //error
+ break;
+
+ }
+
+ return 0;
+
+}
+
+/** \brief Create a 1MB Section
+
+ \param [in] ttb Translation table base address
+ \param [in] base_address Section base address
+ \param [in] count Number of sections to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTSection(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1)
+{
+ uint32_t offset;
+ uint32_t entry;
+ uint32_t i;
+
+ offset = base_address >> 20;
+ entry = (base_address & 0xFFF00000) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb = ttb + offset;
+
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb++ = entry;
+ entry += OFFSET_1M;
+ }
+}
+
+/** \brief Create a 4k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 4k base address
+ \param [in] count Number of 4k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_4k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFFF000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_4K;
+ }
+}
+
+/** \brief Create a 64k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 64k base address
+ \param [in] count Number of 64k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_64k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i,j;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFF0000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //create 16 entries
+ for (j = 0; j < 16; j++)
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_64K;
+ }
+}
+
+/*@} end of MMU_Functions */
+#endif
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/core_cm0.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,682 @@
+/**************************************************************************//**
+ * @file core_cm0.h
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M0
+ @{
+ */
+
+/* CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/core_cm0plus.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,793 @@
+/**************************************************************************//**
+ * @file core_cm0plus.h
+ * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0PLUS_H_GENERIC
+#define __CORE_CM0PLUS_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex-M0+
+ @{
+ */
+
+/* CMSIS CM0P definitions */
+#define __CM0PLUS_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0PLUS_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16) | \
+ __CM0PLUS_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0PLUS_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0PLUS_H_DEPENDANT
+#define __CORE_CM0PLUS_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0PLUS_REV
+ #define __CM0PLUS_REV 0x0000
+ #warning "__CM0PLUS_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __VTOR_PRESENT
+ #define __VTOR_PRESENT 0
+ #warning "__VTOR_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex-M0+ */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+#if (__VTOR_PRESENT == 1)
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+#else
+ uint32_t RESERVED0;
+#endif
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if (__VTOR_PRESENT == 1)
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 8 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 8 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0+ Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0PLUS_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/core_cm3.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1627 @@
+/**************************************************************************//**
+ * @file core_cm3.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM3_H_GENERIC
+#define __CORE_CM3_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M3
+ @{
+ */
+
+/* CMSIS CM3 definitions */
+#define __CM3_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | \
+ __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x03) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI__VFP_SUPPORT____
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM3_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM3_H_DEPENDANT
+#define __CORE_CM3_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM3_REV
+ #define __CM3_REV 0x0200
+ #warning "__CM3_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M3 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#if (__CM3_REV < 0x0201) /* core r2p1 */
+#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#else
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+#else
+ uint32_t RESERVED1[1];
+#endif
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM3_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/core_cm4.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1772 @@
+/**************************************************************************//**
+ * @file core_cm4.h
+ * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_H_GENERIC
+#define __CORE_CM4_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M4
+ @{
+ */
+
+/* CMSIS CM4 definitions */
+#define __CM4_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM4_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16) | \
+ __CM4_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x04) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+#include <core_cm4_simd.h> /* Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CM4_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM4_H_DEPENDANT
+#define __CORE_CM4_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM4_REV
+ #define __CM4_REV 0x0000
+ #warning "__CM4_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 0
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M4 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ - Core FPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISOOFP_Pos 9 /*!< ACTLR: DISOOFP Position */
+#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */
+
+#define SCnSCB_ACTLR_DISFPCA_Pos 8 /*!< ACTLR: DISFPCA Position */
+#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_FPU Floating Point Unit (FPU)
+ \brief Type definitions for the Floating Point Unit (FPU)
+ @{
+ */
+
+/** \brief Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __IO uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
+ __IO uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
+ __IO uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
+ __I uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
+ __I uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register */
+#define FPU_FPCCR_ASPEN_Pos 31 /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos 30 /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos 8 /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos 6 /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos 5 /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos 4 /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos 3 /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos 1 /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos 0 /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk (1UL << FPU_FPCCR_LSPACT_Pos) /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register */
+#define FPU_FPCAR_ADDRESS_Pos 3 /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register */
+#define FPU_FPDSCR_AHP_Pos 26 /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos 25 /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos 24 /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos 22 /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 */
+#define FPU_MVFR0_FP_rounding_modes_Pos 28 /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos 24 /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos 20 /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos 16 /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos 12 /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos 8 /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos 4 /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos 0 /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL << FPU_MVFR0_A_SIMD_registers_Pos) /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 */
+#define FPU_MVFR1_FP_fused_MAC_Pos 28 /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos 24 /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos 4 /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos 0 /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk (0xFUL << FPU_MVFR1_FtZ_mode_Pos) /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+#if (__FPU_PRESENT == 1)
+ #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
+ #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+/* NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); enable interrupt */
+ NVIC->ISER[(uint32_t)((int32_t)IRQn) >> 5] = (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM4_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/core_cm4_simd.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,673 @@
+/**************************************************************************//**
+ * @file core_cm4_simd.h
+ * @brief CMSIS Cortex-M4 SIMD Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_SIMD_H
+#define __CORE_CM4_SIMD_H
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ ******************************************************************************/
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#define __SADD8 __sadd8
+#define __QADD8 __qadd8
+#define __SHADD8 __shadd8
+#define __UADD8 __uadd8
+#define __UQADD8 __uqadd8
+#define __UHADD8 __uhadd8
+#define __SSUB8 __ssub8
+#define __QSUB8 __qsub8
+#define __SHSUB8 __shsub8
+#define __USUB8 __usub8
+#define __UQSUB8 __uqsub8
+#define __UHSUB8 __uhsub8
+#define __SADD16 __sadd16
+#define __QADD16 __qadd16
+#define __SHADD16 __shadd16
+#define __UADD16 __uadd16
+#define __UQADD16 __uqadd16
+#define __UHADD16 __uhadd16
+#define __SSUB16 __ssub16
+#define __QSUB16 __qsub16
+#define __SHSUB16 __shsub16
+#define __USUB16 __usub16
+#define __UQSUB16 __uqsub16
+#define __UHSUB16 __uhsub16
+#define __SASX __sasx
+#define __QASX __qasx
+#define __SHASX __shasx
+#define __UASX __uasx
+#define __UQASX __uqasx
+#define __UHASX __uhasx
+#define __SSAX __ssax
+#define __QSAX __qsax
+#define __SHSAX __shsax
+#define __USAX __usax
+#define __UQSAX __uqsax
+#define __UHSAX __uhsax
+#define __USAD8 __usad8
+#define __USADA8 __usada8
+#define __SSAT16 __ssat16
+#define __USAT16 __usat16
+#define __UXTB16 __uxtb16
+#define __UXTAB16 __uxtab16
+#define __SXTB16 __sxtb16
+#define __SXTAB16 __sxtab16
+#define __SMUAD __smuad
+#define __SMUADX __smuadx
+#define __SMLAD __smlad
+#define __SMLADX __smladx
+#define __SMLALD __smlald
+#define __SMLALDX __smlaldx
+#define __SMUSD __smusd
+#define __SMUSDX __smusdx
+#define __SMLSD __smlsd
+#define __SMLSDX __smlsdx
+#define __SMLSLD __smlsld
+#define __SMLSLDX __smlsldx
+#define __SEL __sel
+#define __QADD __qadd
+#define __QSUB __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
+ ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
+
+#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
+ ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
+
+#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+ ((int64_t)(ARG3) << 32) ) >> 32))
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_iar.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_ccs.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLALD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLALDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLSLD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLSLDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ if (ARG3 == 0) \
+ __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
+ else \
+ __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+/* not yet supported */
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CORE_CM4_SIMD_H */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/core_cmFunc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,636 @@
+/**************************************************************************//**
+ * @file core_cmFunc.h
+ * @brief CMSIS Cortex-M Core Function Access Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ register uint32_t __regIPSR __ASM("ipsr");
+ return(__regIPSR);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ register uint32_t __regXPSR __ASM("xpsr");
+ return(__regXPSR);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ return(__regProcessStackPointer);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ __regProcessStackPointer = topOfProcStack;
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ return(__regMainStackPointer);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ __regMainStackPointer = topOfMainStack;
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0xff);
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/** \brief Enable IRQ Interrupts
+
+ This function enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ uint32_t result;
+
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all instrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CMFUNC_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/core_cmInstr.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,688 @@
+/**************************************************************************//**
+ * @file core_cmInstr.h
+ * @brief CMSIS Cortex-M Core Instruction Access Header File
+ * @version V3.20
+ * @date 05. March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __nop
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+#define __WFI __wfi
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __wfe
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __sev
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+#define __ISB() __isb(0xF)
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() __dsb(0xF)
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() __dmb(0xF)
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __rev
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+ rev16 r0, r0
+ bx lr
+}
+#endif
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+ revsh r0, r0
+ bx lr
+}
+#endif
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+#define __ROR __ror
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __breakpoint(value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __RBIT __rbit
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXB(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXH(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXW(value, ptr) __strex(value, ptr)
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+#define __CLREX __clrex
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT __ssat
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __usat
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __clz
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constrant "l"
+ * Otherwise, use general registers, specified by constrant "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __NOP(void)
+{
+ __ASM volatile ("nop");
+}
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFI(void)
+{
+ __ASM volatile ("wfi");
+}
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFE(void)
+{
+ __ASM volatile ("wfe");
+}
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __SEV(void)
+{
+ __ASM volatile ("sev");
+}
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ISB(void)
+{
+ __ASM volatile ("isb");
+}
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DSB(void)
+{
+ __ASM volatile ("dsb");
+}
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void)
+{
+ __ASM volatile ("dmb");
+}
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+ return __builtin_bswap32(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ return (short)__builtin_bswap16(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32 - op2));
+}
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void)
+{
+ __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/hal_tick.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,60 @@
+/**
+ ******************************************************************************
+ * @file hal_tick.h
+ * @author MCD Application Team
+ * @brief Initialization of HAL tick
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#ifndef __HAL_TICK_H
+#define __HAL_TICK_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "stm32f3xx.h"
+#include "cmsis_nvic.h"
+
+#define TIM_MST TIM2
+#define TIM_MST_IRQ TIM2_IRQn
+#define TIM_MST_RCC __TIM2_CLK_ENABLE()
+
+#define TIM_MST_RESET_ON __TIM2_FORCE_RESET()
+#define TIM_MST_RESET_OFF __TIM2_RELEASE_RESET()
+
+#define HAL_TICK_DELAY (1000) // 1 ms
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __HAL_TICK_H
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f303xe.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,8212 @@
+/**
+ ******************************************************************************
+ * @file stm32f303xe.h
+ * @author MCD Application Team
+ * @version V2.1.0
+ * @date 12-Sept-2014
+ * @brief CMSIS STM32F303xE Devices Peripheral Access Layer Header File.
+ *
+ * This file contains:
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripherals registers hardware
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS_Device
+ * @{
+ */
+
+/** @addtogroup stm32f303xe
+ * @{
+ */
+
+#ifndef __STM32F303xE_H
+#define __STM32F303xE_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Configuration_section_for_CMSIS
+ * @{
+ */
+
+/**
+ * @brief Configuration of the Cortex-M4 Processor and Core Peripherals
+ */
+#define __CM4_REV 0x0001 /*!< Core revision r0p1 */
+#define __MPU_PRESENT 1 /*!< STM32F303xE devices provide an MPU */
+#define __NVIC_PRIO_BITS 4 /*!< STM32F303xE devices use 4 Bits for the Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+#define __FPU_PRESENT 1 /*!< STM32F303xE devices provide an FPU */
+
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_interrupt_number_definition
+ * @{
+ */
+
+/**
+ * @brief STM32F303xE devices Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
+ */
+typedef enum
+{
+/****** Cortex-M4 Processor Exceptions Numbers ****************************************************************/
+ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */
+ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M4 Memory Management Interrupt */
+ BusFault_IRQn = -11, /*!< 5 Cortex-M4 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /*!< 6 Cortex-M4 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /*!< 11 Cortex-M4 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M4 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /*!< 14 Cortex-M4 Pend SV Interrupt */
+ SysTick_IRQn = -1, /*!< 15 Cortex-M4 System Tick Interrupt */
+/****** STM32 specific Interrupt Numbers **********************************************************************/
+ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */
+ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */
+ TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line 19 */
+ RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line 20 */
+ FLASH_IRQn = 4, /*!< FLASH global Interrupt */
+ RCC_IRQn = 5, /*!< RCC global Interrupt */
+ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */
+ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */
+ EXTI2_TSC_IRQn = 8, /*!< EXTI Line2 Interrupt and Touch Sense Controller Interrupt */
+ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */
+ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */
+ DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 Interrupt */
+ DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 Interrupt */
+ DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 Interrupt */
+ DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 Interrupt */
+ DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 Interrupt */
+ DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 Interrupt */
+ DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 Interrupt */
+ ADC1_2_IRQn = 18, /*!< ADC1 & ADC2 Interrupts */
+ USB_HP_CAN_TX_IRQn = 19, /*!< USB Device High Priority or CAN TX Interrupts */
+ USB_LP_CAN_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN RX0 Interrupts */
+ CAN_RX1_IRQn = 21, /*!< CAN RX1 Interrupt */
+ CAN_SCE_IRQn = 22, /*!< CAN SCE Interrupt */
+ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */
+ TIM1_BRK_TIM15_IRQn = 24, /*!< TIM1 Break and TIM15 Interrupts */
+ TIM1_UP_TIM16_IRQn = 25, /*!< TIM1 Update and TIM16 Interrupts */
+ TIM1_TRG_COM_TIM17_IRQn = 26, /*!< TIM1 Trigger and Commutation and TIM17 Interrupt */
+ TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */
+ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */
+ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */
+ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */
+ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt & EXTI Line23 Interrupt (I2C1 wakeup) */
+ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */
+ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt & EXTI Line24 Interrupt (I2C2 wakeup) */
+ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */
+ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */
+ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */
+ USART1_IRQn = 37, /*!< USART1 global Interrupt & EXTI Line25 Interrupt (USART1 wakeup) */
+ USART2_IRQn = 38, /*!< USART2 global Interrupt & EXTI Line26 Interrupt (USART2 wakeup) */
+ USART3_IRQn = 39, /*!< USART3 global Interrupt & EXTI Line28 Interrupt (USART3 wakeup) */
+ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */
+ RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line 17 Interrupt */
+ USBWakeUp_IRQn = 42, /*!< USB Wakeup Interrupt */
+ TIM8_BRK_IRQn = 43, /*!< TIM8 Break Interrupt */
+ TIM8_UP_IRQn = 44, /*!< TIM8 Update Interrupt */
+ TIM8_TRG_COM_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt */
+ TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */
+ ADC3_IRQn = 47, /*!< ADC3 global Interrupt */
+ FMC_IRQn = 48, /*!< FMC global Interrupt */
+ SPI3_IRQn = 51, /*!< SPI3 global Interrupt */
+ UART4_IRQn = 52, /*!< UART4 global Interrupt & EXTI Line34 Interrupt (UART4 wakeup) */
+ UART5_IRQn = 53, /*!< UART5 global Interrupt & EXTI Line35 Interrupt (UART5 wakeup) */
+ TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC channel 1&2 underrun error interrupts */
+ TIM7_IRQn = 55, /*!< TIM7 global Interrupt */
+ DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */
+ DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */
+ DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */
+ DMA2_Channel4_IRQn = 59, /*!< DMA2 Channel 4 global Interrupt */
+ DMA2_Channel5_IRQn = 60, /*!< DMA2 Channel 5 global Interrupt */
+ ADC4_IRQn = 61, /*!< ADC4 global Interrupt */
+ COMP1_2_3_IRQn = 64, /*!< COMP1, COMP2 and COMP3 global Interrupt via EXTI Line21, 22 and 29*/
+ COMP4_5_6_IRQn = 65, /*!< COMP4, COMP5 and COMP6 global Interrupt via EXTI Line30, 31 and 32*/
+ COMP7_IRQn = 66, /*!< COMP7 global Interrupt via EXTI Line33 */
+ I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */
+ I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */
+ USB_HP_IRQn = 74, /*!< USB High Priority global Interrupt remap */
+ USB_LP_IRQn = 75, /*!< USB Low Priority global Interrupt remap */
+ USBWakeUp_RMP_IRQn = 76, /*!< USB Wakeup Interrupt remap */
+ TIM20_BRK_IRQn = 77, /*!< TIM20 Break Interrupt */
+ TIM20_UP_IRQn = 78, /*!< TIM20 Update Interrupt */
+ TIM20_TRG_COM_IRQn = 79, /*!< TIM20 Trigger and Commutation Interrupt */
+ TIM20_CC_IRQn = 80, /*!< TIM20 Capture Compare Interrupt */
+ FPU_IRQn = 81, /*!< Floating point Interrupt */
+ SPI4_IRQn = 84, /*!< SPI4 global Interrupt */
+} IRQn_Type;
+
+/**
+ * @}
+ */
+
+#include "core_cm4.h" /* Cortex-M4 processor and core peripherals */
+#include "system_stm32f3xx.h" /* STM32F3xx System Header */
+#include <stdint.h>
+
+/** @addtogroup Peripheral_registers_structures
+ * @{
+ */
+
+/**
+ * @brief Analog to Digital Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< ADC Interrupt and Status Register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< ADC Interrupt Enable Register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< ADC control register, Address offset: 0x08 */
+ __IO uint32_t CFGR; /*!< ADC Configuration register, Address offset: 0x0C */
+ uint32_t RESERVED0; /*!< Reserved, 0x010 */
+ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x14 */
+ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x18 */
+ uint32_t RESERVED1; /*!< Reserved, 0x01C */
+ __IO uint32_t TR1; /*!< ADC watchdog threshold register 1, Address offset: 0x20 */
+ __IO uint32_t TR2; /*!< ADC watchdog threshold register 2, Address offset: 0x24 */
+ __IO uint32_t TR3; /*!< ADC watchdog threshold register 3, Address offset: 0x28 */
+ uint32_t RESERVED2; /*!< Reserved, 0x02C */
+ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x30 */
+ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x34 */
+ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x38 */
+ __IO uint32_t SQR4; /*!< ADC regular sequence register 4, Address offset: 0x3C */
+ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x40 */
+ uint32_t RESERVED3; /*!< Reserved, 0x044 */
+ uint32_t RESERVED4; /*!< Reserved, 0x048 */
+ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x4C */
+ uint32_t RESERVED5[4]; /*!< Reserved, 0x050 - 0x05C */
+ __IO uint32_t OFR1; /*!< ADC offset register 1, Address offset: 0x60 */
+ __IO uint32_t OFR2; /*!< ADC offset register 2, Address offset: 0x64 */
+ __IO uint32_t OFR3; /*!< ADC offset register 3, Address offset: 0x68 */
+ __IO uint32_t OFR4; /*!< ADC offset register 4, Address offset: 0x6C */
+ uint32_t RESERVED6[4]; /*!< Reserved, 0x070 - 0x07C */
+ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x80 */
+ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x84 */
+ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x88 */
+ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x8C */
+ uint32_t RESERVED7[4]; /*!< Reserved, 0x090 - 0x09C */
+ __IO uint32_t AWD2CR; /*!< ADC Analog Watchdog 2 Configuration Register, Address offset: 0xA0 */
+ __IO uint32_t AWD3CR; /*!< ADC Analog Watchdog 3 Configuration Register, Address offset: 0xA4 */
+ uint32_t RESERVED8; /*!< Reserved, 0x0A8 */
+ uint32_t RESERVED9; /*!< Reserved, 0x0AC */
+ __IO uint32_t DIFSEL; /*!< ADC Differential Mode Selection Register, Address offset: 0xB0 */
+ __IO uint32_t CALFACT; /*!< ADC Calibration Factors, Address offset: 0xB4 */
+
+} ADC_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1/3 base address + 0x300 */
+ uint32_t RESERVED; /*!< Reserved, ADC1/3 base address + 0x304 */
+ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1/3 base address + 0x308 */
+ __IO uint32_t CDR; /*!< ADC common regular data register for dual
+ AND triple modes, Address offset: ADC1/3 base address + 0x30C */
+} ADC_Common_TypeDef;
+
+/**
+ * @brief Controller Area Network TxMailBox
+ */
+typedef struct
+{
+ __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */
+ __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */
+ __IO uint32_t TDLR; /*!< CAN mailbox data low register */
+ __IO uint32_t TDHR; /*!< CAN mailbox data high register */
+} CAN_TxMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FIFOMailBox
+ */
+typedef struct
+{
+ __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */
+ __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */
+ __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */
+ __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */
+} CAN_FIFOMailBox_TypeDef;
+
+/**
+ * @brief Controller Area Network FilterRegister
+ */
+typedef struct
+{
+ __IO uint32_t FR1; /*!< CAN Filter bank register 1 */
+ __IO uint32_t FR2; /*!< CAN Filter bank register 1 */
+} CAN_FilterRegister_TypeDef;
+
+/**
+ * @brief Controller Area Network
+ */
+typedef struct
+{
+ __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */
+ __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */
+ __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */
+ __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */
+ __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */
+ __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */
+ __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */
+ __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */
+ uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */
+ CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */
+ CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */
+ uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */
+ __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */
+ __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */
+ uint32_t RESERVED2; /*!< Reserved, 0x208 */
+ __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */
+ uint32_t RESERVED3; /*!< Reserved, 0x210 */
+ __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */
+ uint32_t RESERVED4; /*!< Reserved, 0x218 */
+ __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */
+ uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */
+ CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */
+} CAN_TypeDef;
+
+/**
+ * @brief Analog Comparators
+ */
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< Comparator control Status register, Address offset: 0x00 */
+} COMP_TypeDef;
+
+/**
+ * @brief CRC calculation unit
+ */
+
+typedef struct
+{
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
+ uint32_t RESERVED2; /*!< Reserved, 0x0C */
+ __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */
+ __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */
+} CRC_TypeDef;
+
+/**
+ * @brief Digital to Analog Converter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
+} DAC_TypeDef;
+
+/**
+ * @brief Debug MCU
+ */
+
+typedef struct
+{
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
+}DBGMCU_TypeDef;
+
+/**
+ * @brief DMA Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
+} DMA_Channel_TypeDef;
+
+typedef struct
+{
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt clear flag register, Address offset: 0x04 */
+} DMA_TypeDef;
+
+/**
+ * @brief External Interrupt/Event Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */
+ uint32_t RESERVED1; /*!< Reserved, 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, 0x1C */
+ __IO uint32_t IMR2; /*!< EXTI Interrupt mask register, Address offset: 0x20 */
+ __IO uint32_t EMR2; /*!< EXTI Event mask register, Address offset: 0x24 */
+ __IO uint32_t RTSR2; /*!< EXTI Rising trigger selection register, Address offset: 0x28 */
+ __IO uint32_t FTSR2; /*!< EXTI Falling trigger selection register, Address offset: 0x2C */
+ __IO uint32_t SWIER2; /*!< EXTI Software interrupt event register, Address offset: 0x30 */
+ __IO uint32_t PR2; /*!< EXTI Pending register, Address offset: 0x34 */
+}EXTI_TypeDef;
+
+/**
+ * @brief FLASH Registers
+ */
+
+typedef struct
+{
+ __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */
+ __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */
+ __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */
+ __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */
+ __IO uint32_t AR; /*!< FLASH address register, Address offset: 0x14 */
+ uint32_t RESERVED; /*!< Reserved, 0x18 */
+ __IO uint32_t OBR; /*!< FLASH Option byte register, Address offset: 0x1C */
+ __IO uint32_t WRPR; /*!< FLASH Write register, Address offset: 0x20 */
+
+} FLASH_TypeDef;
+
+/**
+ * @brief Flexible Memory Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */
+} FMC_Bank1_TypeDef;
+
+/**
+ * @brief Flexible Memory Controller Bank1E
+ */
+
+typedef struct
+{
+ __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */
+} FMC_Bank1E_TypeDef;
+
+/**
+ * @brief Flexible Memory Controller Bank2
+ */
+
+typedef struct
+{
+ __IO uint32_t PCR2; /*!< NAND Flash control register 2, Address offset: 0x60 */
+ __IO uint32_t SR2; /*!< NAND Flash FIFO status and interrupt register 2, Address offset: 0x64 */
+ __IO uint32_t PMEM2; /*!< NAND Flash Common memory space timing register 2, Address offset: 0x68 */
+ __IO uint32_t PATT2; /*!< NAND Flash Attribute memory space timing register 2, Address offset: 0x6C */
+ uint32_t RESERVED0; /*!< Reserved, 0x70 */
+ __IO uint32_t ECCR2; /*!< NAND Flash ECC result registers 2, Address offset: 0x74 */
+ uint32_t RESERVED1; /*!< Reserved, 0x78 */
+ uint32_t RESERVED2; /*!< Reserved, 0x7C */
+ __IO uint32_t PCR3; /*!< NAND Flash control register 3, Address offset: 0x80 */
+ __IO uint32_t SR3; /*!< NAND Flash FIFO status and interrupt register 3, Address offset: 0x84 */
+ __IO uint32_t PMEM3; /*!< NAND Flash Common memory space timing register 3, Address offset: 0x88 */
+ __IO uint32_t PATT3; /*!< NAND Flash Attribute memory space timing register 3, Address offset: 0x8C */
+ uint32_t RESERVED3; /*!< Reserved, 0x90 */
+ __IO uint32_t ECCR3; /*!< NAND Flash ECC result registers 3, Address offset: 0x94 */
+} FMC_Bank2_3_TypeDef;
+
+/**
+ * @brief Flexible Memory Controller Bank4
+ */
+
+typedef struct
+{
+ __IO uint32_t PCR4; /*!< PC Card control register 4, Address offset: 0xA0 */
+ __IO uint32_t SR4; /*!< PC Card FIFO status and interrupt register 4, Address offset: 0xA4 */
+ __IO uint32_t PMEM4; /*!< PC Card Common memory space timing register 4, Address offset: 0xA8 */
+ __IO uint32_t PATT4; /*!< PC Card Attribute memory space timing register 4, Address offset: 0xAC */
+ __IO uint32_t PIO4; /*!< PC Card I/O space timing register 4, Address offset: 0xB0 */
+} FMC_Bank4_TypeDef;
+
+/**
+ * @brief Option Bytes Registers
+ */
+typedef struct
+{
+ __IO uint16_t RDP; /*!<FLASH option byte Read protection, Address offset: 0x00 */
+ __IO uint16_t USER; /*!<FLASH option byte user options, Address offset: 0x02 */
+ uint16_t RESERVED0; /*!< Reserved, 0x04 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint16_t WRP0; /*!<FLASH option byte write protection 0, Address offset: 0x08 */
+ __IO uint16_t WRP1; /*!<FLASH option byte write protection 1, Address offset: 0x0C */
+ __IO uint16_t WRP2; /*!<FLASH option byte write protection 2, Address offset: 0x10 */
+ __IO uint16_t WRP3; /*!<FLASH option byte write protection 3, Address offset: 0x12 */
+} OB_TypeDef;
+
+/**
+ * @brief General Purpose I/O
+ */
+
+typedef struct
+{
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ __IO uint16_t BSRRL; /*!< GPIO port bit set/reset low register, Address offset: 0x18 */
+ __IO uint16_t BSRRH; /*!< GPIO port bit set/reset high register, Address offset: 0x1A */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */
+ __IO uint32_t BRR; /*!< GPIO bit reset register, Address offset: 0x28 */
+}GPIO_TypeDef;
+
+/**
+ * @brief Operational Amplifier (OPAMP)
+ */
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< OPAMP control and status register, Address offset: 0x00 */
+} OPAMP_TypeDef;
+
+/**
+ * @brief System configuration controller
+ */
+
+typedef struct
+{
+ __IO uint32_t CFGR1; /*!< SYSCFG configuration register 1, Address offset: 0x00 */
+ __IO uint32_t RCR; /*!< SYSCFG CCM SRAM protection register, Address offset: 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x14-0x08 */
+ __IO uint32_t CFGR2; /*!< SYSCFG configuration register 2, Address offset: 0x18 */
+ __IO uint32_t RESERVED0; /*!< Reserved, 0x1C */
+ __IO uint32_t RESERVED1; /*!< Reserved, 0x20 */
+ __IO uint32_t RESERVED2; /*!< Reserved, 0x24 */
+ __IO uint32_t RESERVED4; /*!< Reserved, 0x28 */
+ __IO uint32_t RESERVED5; /*!< Reserved, 0x2C */
+ __IO uint32_t RESERVED6; /*!< Reserved, 0x30 */
+ __IO uint32_t RESERVED7; /*!< Reserved, 0x34 */
+ __IO uint32_t RESERVED8; /*!< Reserved, 0x38 */
+ __IO uint32_t RESERVED9; /*!< Reserved, 0x3C */
+ __IO uint32_t RESERVED10; /*!< Reserved, 0x40 */
+ __IO uint32_t RESERVED11; /*!< Reserved, 0x44 */
+ __IO uint32_t CFGR4; /*!< SYSCFG configuration register 4, Address offset: 0x48 */
+ __IO uint32_t RESERVED12; /*!< Reserved, 0x4C */
+ __IO uint32_t RESERVED13; /*!< Reserved, 0x50 */
+} SYSCFG_TypeDef;
+
+/**
+ * @brief Inter-integrated Circuit Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */
+ __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */
+ __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */
+ __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */
+ __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */
+ __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */
+ __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */
+ __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */
+ __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */
+}I2C_TypeDef;
+
+/**
+ * @brief Independent WATCHDOG
+ */
+
+typedef struct
+{
+ __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */
+ __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */
+} IWDG_TypeDef;
+
+/**
+ * @brief Power Control
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
+} PWR_TypeDef;
+
+/**
+ * @brief Reset and Clock Control
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x04 */
+ __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x08 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x0C */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t AHBENR; /*!< RCC AHB peripheral clock register, Address offset: 0x14 */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x18 */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x1C */
+ __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x20 */
+ __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x24 */
+ __IO uint32_t AHBRSTR; /*!< RCC AHB peripheral reset register, Address offset: 0x28 */
+ __IO uint32_t CFGR2; /*!< RCC clock configuration register 2, Address offset: 0x2C */
+ __IO uint32_t CFGR3; /*!< RCC clock configuration register 3, Address offset: 0x30 */
+} RCC_TypeDef;
+
+/**
+ * @brief Real-Time Clock
+ */
+
+typedef struct
+{
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ uint32_t RESERVED0; /*!< Reserved, 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */
+ __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */
+ uint32_t RESERVED7; /*!< Reserved, 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+ __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */
+ __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */
+ __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */
+ __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */
+ __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */
+ __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */
+ __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */
+ __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */
+ __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */
+ __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */
+ __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */
+} RTC_TypeDef;
+
+
+/**
+ * @brief Serial Peripheral Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */
+ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */
+ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */
+ __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */
+ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+} SPI_TypeDef;
+
+/**
+ * @brief TIM
+ */
+typedef struct
+{
+ __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */
+ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */
+ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */
+ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */
+ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */
+ __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */
+ __IO uint32_t CCR5; /*!< TIM capture/compare register5, Address offset: 0x58 */
+ __IO uint32_t CCR6; /*!< TIM capture/compare register 4, Address offset: 0x5C */
+} TIM_TypeDef;
+
+/**
+ * @brief Touch Sensing Controller (TSC)
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< TSC control register, Address offset: 0x00 */
+ __IO uint32_t IER; /*!< TSC interrupt enable register, Address offset: 0x04 */
+ __IO uint32_t ICR; /*!< TSC interrupt clear register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< TSC interrupt status register, Address offset: 0x0C */
+ __IO uint32_t IOHCR; /*!< TSC I/O hysteresis control register, Address offset: 0x10 */
+ uint32_t RESERVED1; /*!< Reserved, Address offset: 0x14 */
+ __IO uint32_t IOASCR; /*!< TSC I/O analog switch control register, Address offset: 0x18 */
+ uint32_t RESERVED2; /*!< Reserved, Address offset: 0x1C */
+ __IO uint32_t IOSCR; /*!< TSC I/O sampling control register, Address offset: 0x20 */
+ uint32_t RESERVED3; /*!< Reserved, Address offset: 0x24 */
+ __IO uint32_t IOCCR; /*!< TSC I/O channel control register, Address offset: 0x28 */
+ uint32_t RESERVED4; /*!< Reserved, Address offset: 0x2C */
+ __IO uint32_t IOGCSR; /*!< TSC I/O group control status register, Address offset: 0x30 */
+ __IO uint32_t IOGXCR[8]; /*!< TSC I/O group x counter register, Address offset: 0x34-50 */
+} TSC_TypeDef;
+
+/**
+ * @brief Universal Synchronous Asynchronous Receiver Transmitter
+ */
+
+typedef struct
+{
+ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */
+ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */
+ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */
+ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */
+ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */
+ __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */
+ __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */
+ __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */
+ __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */
+ __IO uint16_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */
+ uint16_t RESERVED1; /*!< Reserved, 0x26 */
+ __IO uint16_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */
+ uint16_t RESERVED2; /*!< Reserved, 0x2A */
+} USART_TypeDef;
+
+/**
+ * @brief Universal Serial Bus Full Speed Device
+ */
+
+typedef struct
+{
+ __IO uint16_t EP0R; /*!< USB Endpoint 0 register, Address offset: 0x00 */
+ __IO uint16_t RESERVED0; /*!< Reserved */
+ __IO uint16_t EP1R; /*!< USB Endpoint 1 register, Address offset: 0x04 */
+ __IO uint16_t RESERVED1; /*!< Reserved */
+ __IO uint16_t EP2R; /*!< USB Endpoint 2 register, Address offset: 0x08 */
+ __IO uint16_t RESERVED2; /*!< Reserved */
+ __IO uint16_t EP3R; /*!< USB Endpoint 3 register, Address offset: 0x0C */
+ __IO uint16_t RESERVED3; /*!< Reserved */
+ __IO uint16_t EP4R; /*!< USB Endpoint 4 register, Address offset: 0x10 */
+ __IO uint16_t RESERVED4; /*!< Reserved */
+ __IO uint16_t EP5R; /*!< USB Endpoint 5 register, Address offset: 0x14 */
+ __IO uint16_t RESERVED5; /*!< Reserved */
+ __IO uint16_t EP6R; /*!< USB Endpoint 6 register, Address offset: 0x18 */
+ __IO uint16_t RESERVED6; /*!< Reserved */
+ __IO uint16_t EP7R; /*!< USB Endpoint 7 register, Address offset: 0x1C */
+ __IO uint16_t RESERVED7[17]; /*!< Reserved */
+ __IO uint16_t CNTR; /*!< Control register, Address offset: 0x40 */
+ __IO uint16_t RESERVED8; /*!< Reserved */
+ __IO uint16_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */
+ __IO uint16_t RESERVED9; /*!< Reserved */
+ __IO uint16_t FNR; /*!< Frame number register, Address offset: 0x48 */
+ __IO uint16_t RESERVEDA; /*!< Reserved */
+ __IO uint16_t DADDR; /*!< Device address register, Address offset: 0x4C */
+ __IO uint16_t RESERVEDB; /*!< Reserved */
+ __IO uint16_t BTABLE; /*!< Buffer Table address register, Address offset: 0x50 */
+ __IO uint16_t RESERVEDC; /*!< Reserved */
+ __IO uint16_t LPMCSR; /*!< LPM Control and Status register, Address offset: 0x54 */
+ __IO uint16_t RESERVEDD; /*!< Reserved */
+} USB_TypeDef;
+
+/**
+ * @brief Window WATCHDOG
+ */
+typedef struct
+{
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
+} WWDG_TypeDef;
+
+/** @addtogroup Peripheral_memory_map
+ * @{
+ */
+
+#define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH(512KB) base address in the alias region */
+#define CCMDATARAM_BASE ((uint32_t)0x10000000) /*!< CCM(core coupled memory) data RAM(16 KB) base address in the alias region */
+#define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM(64KB) base address in the alias region */
+#define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */
+#define FMC_R_BASE ((uint32_t)0xA0000000) /*!< FMC registers base address */
+
+#define CCMDATARAM_BB_BASE ((uint32_t)0x12000000) /*!< CCM(core coupled memory) data RAM(16 KB) base address in the bit-band region */
+#define SRAM_BB_BASE ((uint32_t)0x22000000) /*!< SRAM(64KB) base address in the bit-band region */
+#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */
+
+
+/*!< Peripheral memory map */
+#define APB1PERIPH_BASE PERIPH_BASE
+#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000)
+#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000)
+#define AHB2PERIPH_BASE (PERIPH_BASE + 0x08000000)
+#define AHB3PERIPH_BASE (PERIPH_BASE + 0x10000000)
+
+/*!< APB1 peripherals */
+#define TIM2_BASE (APB1PERIPH_BASE + 0x00000000)
+#define TIM3_BASE (APB1PERIPH_BASE + 0x00000400)
+#define TIM4_BASE (APB1PERIPH_BASE + 0x00000800)
+#define TIM6_BASE (APB1PERIPH_BASE + 0x00001000)
+#define TIM7_BASE (APB1PERIPH_BASE + 0x00001400)
+#define RTC_BASE (APB1PERIPH_BASE + 0x00002800)
+#define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00)
+#define IWDG_BASE (APB1PERIPH_BASE + 0x00003000)
+#define I2S2ext_BASE (APB1PERIPH_BASE + 0x00003400)
+#define SPI2_BASE (APB1PERIPH_BASE + 0x00003800)
+#define SPI3_BASE (APB1PERIPH_BASE + 0x00003C00)
+#define I2S3ext_BASE (APB1PERIPH_BASE + 0x00004000)
+#define USART2_BASE (APB1PERIPH_BASE + 0x00004400)
+#define USART3_BASE (APB1PERIPH_BASE + 0x00004800)
+#define UART4_BASE (APB1PERIPH_BASE + 0x00004C00)
+#define UART5_BASE (APB1PERIPH_BASE + 0x00005000)
+#define I2C1_BASE (APB1PERIPH_BASE + 0x00005400)
+#define I2C2_BASE (APB1PERIPH_BASE + 0x00005800)
+#define USB_BASE (APB1PERIPH_BASE + 0x00005C00) /*!< USB_IP Peripheral Registers base address */
+#define USB_PMAADDR (APB1PERIPH_BASE + 0x00006000) /*!< USB_IP Packet Memory Area base address */
+#define CAN_BASE (APB1PERIPH_BASE + 0x00006400)
+#define PWR_BASE (APB1PERIPH_BASE + 0x00007000)
+#define DAC1_BASE (APB1PERIPH_BASE + 0x00007400)
+#define DAC_BASE DAC1_BASE
+#define I2C3_BASE (APB1PERIPH_BASE + 0x00007800)
+
+/*!< APB2 peripherals */
+#define SYSCFG_BASE (APB2PERIPH_BASE + 0x00000000)
+#define COMP1_BASE (APB2PERIPH_BASE + 0x0000001C)
+#define COMP2_BASE (APB2PERIPH_BASE + 0x00000020)
+#define COMP3_BASE (APB2PERIPH_BASE + 0x00000024)
+#define COMP4_BASE (APB2PERIPH_BASE + 0x00000028)
+#define COMP5_BASE (APB2PERIPH_BASE + 0x0000002C)
+#define COMP6_BASE (APB2PERIPH_BASE + 0x00000030)
+#define COMP7_BASE (APB2PERIPH_BASE + 0x00000034)
+#define COMP_BASE COMP1_BASE
+#define OPAMP1_BASE (APB2PERIPH_BASE + 0x00000038)
+#define OPAMP2_BASE (APB2PERIPH_BASE + 0x0000003C)
+#define OPAMP3_BASE (APB2PERIPH_BASE + 0x00000040)
+#define OPAMP4_BASE (APB2PERIPH_BASE + 0x00000044)
+#define OPAMP_BASE OPAMP1_BASE
+#define EXTI_BASE (APB2PERIPH_BASE + 0x00000400)
+#define TIM1_BASE (APB2PERIPH_BASE + 0x00002C00)
+#define SPI1_BASE (APB2PERIPH_BASE + 0x00003000)
+#define TIM8_BASE (APB2PERIPH_BASE + 0x00003400)
+#define USART1_BASE (APB2PERIPH_BASE + 0x00003800)
+#define SPI4_BASE (APB2PERIPH_BASE + 0x00003C00)
+#define TIM15_BASE (APB2PERIPH_BASE + 0x00004000)
+#define TIM16_BASE (APB2PERIPH_BASE + 0x00004400)
+#define TIM17_BASE (APB2PERIPH_BASE + 0x00004800)
+#define TIM20_BASE (APB2PERIPH_BASE + 0x00005000)
+
+/*!< AHB1 peripherals */
+#define DMA1_BASE (AHB1PERIPH_BASE + 0x00000000)
+#define DMA1_Channel1_BASE (AHB1PERIPH_BASE + 0x00000008)
+#define DMA1_Channel2_BASE (AHB1PERIPH_BASE + 0x0000001C)
+#define DMA1_Channel3_BASE (AHB1PERIPH_BASE + 0x00000030)
+#define DMA1_Channel4_BASE (AHB1PERIPH_BASE + 0x00000044)
+#define DMA1_Channel5_BASE (AHB1PERIPH_BASE + 0x00000058)
+#define DMA1_Channel6_BASE (AHB1PERIPH_BASE + 0x0000006C)
+#define DMA1_Channel7_BASE (AHB1PERIPH_BASE + 0x00000080)
+#define DMA2_BASE (AHB1PERIPH_BASE + 0x00000400)
+#define DMA2_Channel1_BASE (AHB1PERIPH_BASE + 0x00000408)
+#define DMA2_Channel2_BASE (AHB1PERIPH_BASE + 0x0000041C)
+#define DMA2_Channel3_BASE (AHB1PERIPH_BASE + 0x00000430)
+#define DMA2_Channel4_BASE (AHB1PERIPH_BASE + 0x00000444)
+#define DMA2_Channel5_BASE (AHB1PERIPH_BASE + 0x00000458)
+#define RCC_BASE (AHB1PERIPH_BASE + 0x00001000)
+#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x00002000) /*!< Flash registers base address */
+#define OB_BASE ((uint32_t)0x1FFFF800) /*!< Flash Option Bytes base address */
+#define CRC_BASE (AHB1PERIPH_BASE + 0x00003000)
+#define TSC_BASE (AHB1PERIPH_BASE + 0x00004000)
+
+/*!< AHB2 peripherals */
+#define GPIOA_BASE (AHB2PERIPH_BASE + 0x00000000)
+#define GPIOB_BASE (AHB2PERIPH_BASE + 0x00000400)
+#define GPIOC_BASE (AHB2PERIPH_BASE + 0x00000800)
+#define GPIOD_BASE (AHB2PERIPH_BASE + 0x00000C00)
+#define GPIOE_BASE (AHB2PERIPH_BASE + 0x00001000)
+#define GPIOF_BASE (AHB2PERIPH_BASE + 0x00001400)
+#define GPIOG_BASE (AHB2PERIPH_BASE + 0x00001800)
+#define GPIOH_BASE (AHB2PERIPH_BASE + 0x00001C00)
+
+/*!< AHB3 peripherals */
+#define ADC1_BASE (AHB3PERIPH_BASE + 0x00000000)
+#define ADC2_BASE (AHB3PERIPH_BASE + 0x00000100)
+#define ADC1_2_COMMON_BASE (AHB3PERIPH_BASE + 0x00000300)
+#define ADC3_BASE (AHB3PERIPH_BASE + 0x00000400)
+#define ADC4_BASE (AHB3PERIPH_BASE + 0x00000500)
+#define ADC3_4_COMMON_BASE (AHB3PERIPH_BASE + 0x00000700)
+
+/*!< FMC Bankx registers base address */
+#define FMC_Bank1_R_BASE (FMC_R_BASE + 0x0000)
+#define FMC_Bank1E_R_BASE (FMC_R_BASE + 0x0104)
+#define FMC_Bank2_3_R_BASE (FMC_R_BASE + 0x0060)
+#define FMC_Bank4_R_BASE (FMC_R_BASE + 0x00A0)
+
+#define DBGMCU_BASE ((uint32_t)0xE0042000) /*!< Debug MCU registers base address */
+/**
+ * @}
+ */
+
+/** @addtogroup Peripheral_declaration
+ * @{
+ */
+#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
+#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
+#define TIM4 ((TIM_TypeDef *) TIM4_BASE)
+#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
+#define TIM7 ((TIM_TypeDef *) TIM7_BASE)
+#define RTC ((RTC_TypeDef *) RTC_BASE)
+#define WWDG ((WWDG_TypeDef *) WWDG_BASE)
+#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
+#define I2S2ext ((SPI_TypeDef *) I2S2ext_BASE)
+#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define SPI3 ((SPI_TypeDef *) SPI3_BASE)
+#define I2S3ext ((SPI_TypeDef *) I2S3ext_BASE)
+#define USART2 ((USART_TypeDef *) USART2_BASE)
+#define USART3 ((USART_TypeDef *) USART3_BASE)
+#define UART4 ((USART_TypeDef *) UART4_BASE)
+#define UART5 ((USART_TypeDef *) UART5_BASE)
+#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
+#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
+#define CAN ((CAN_TypeDef *) CAN_BASE)
+#define PWR ((PWR_TypeDef *) PWR_BASE)
+#define DAC ((DAC_TypeDef *) DAC_BASE)
+#define DAC1 ((DAC_TypeDef *) DAC1_BASE)
+#define I2C3 ((I2C_TypeDef *) I2C3_BASE)
+#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
+#define COMP ((COMP_TypeDef *) COMP_BASE)
+#define COMP1 ((COMP_TypeDef *) COMP1_BASE)
+#define COMP2 ((COMP_TypeDef *) COMP2_BASE)
+#define COMP3 ((COMP_TypeDef *) COMP3_BASE)
+#define COMP4 ((COMP_TypeDef *) COMP4_BASE)
+#define COMP5 ((COMP_TypeDef *) COMP5_BASE)
+#define COMP6 ((COMP_TypeDef *) COMP6_BASE)
+#define COMP7 ((COMP_TypeDef *) COMP7_BASE)
+#define OPAMP ((OPAMP_TypeDef *) OPAMP_BASE)
+#define OPAMP1 ((OPAMP_TypeDef *) OPAMP1_BASE)
+#define OPAMP2 ((OPAMP_TypeDef *) OPAMP2_BASE)
+#define OPAMP3 ((OPAMP_TypeDef *) OPAMP3_BASE)
+#define OPAMP4 ((OPAMP_TypeDef *) OPAMP4_BASE)
+#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
+#define TIM1 ((TIM_TypeDef *) TIM1_BASE)
+#define SPI1 ((SPI_TypeDef *) SPI1_BASE)
+#define TIM8 ((TIM_TypeDef *) TIM8_BASE)
+#define USART1 ((USART_TypeDef *) USART1_BASE)
+#define SPI4 ((SPI_TypeDef *) SPI4_BASE)
+#define TIM15 ((TIM_TypeDef *) TIM15_BASE)
+#define TIM16 ((TIM_TypeDef *) TIM16_BASE)
+#define TIM17 ((TIM_TypeDef *) TIM17_BASE)
+#define TIM20 ((TIM_TypeDef *) TIM20_BASE)
+#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
+#define DMA1 ((DMA_TypeDef *) DMA1_BASE)
+#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE)
+#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE)
+#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE)
+#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE)
+#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
+#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE)
+#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE)
+#define DMA2 ((DMA_TypeDef *) DMA2_BASE)
+#define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE)
+#define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE)
+#define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE)
+#define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE)
+#define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE)
+#define RCC ((RCC_TypeDef *) RCC_BASE)
+#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
+#define OB ((OB_TypeDef *) OB_BASE)
+#define CRC ((CRC_TypeDef *) CRC_BASE)
+#define TSC ((TSC_TypeDef *) TSC_BASE)
+#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE)
+#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE)
+#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE)
+#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
+#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE)
+#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE)
+#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
+#define ADC2 ((ADC_TypeDef *) ADC2_BASE)
+#define ADC3 ((ADC_TypeDef *) ADC3_BASE)
+#define ADC4 ((ADC_TypeDef *) ADC4_BASE)
+#define ADC1_2_COMMON ((ADC_Common_TypeDef *) ADC1_2_COMMON_BASE)
+#define ADC3_4_COMMON ((ADC_Common_TypeDef *) ADC3_4_COMMON_BASE)
+#define USB ((USB_TypeDef *) USB_BASE)
+#define FMC_Bank1 ((FMC_Bank1_TypeDef *) FMC_Bank1_R_BASE)
+#define FMC_Bank1E ((FMC_Bank1E_TypeDef *) FMC_Bank1E_R_BASE)
+#define FMC_Bank2_3 ((FMC_Bank2_3_TypeDef *) FMC_Bank2_3_R_BASE)
+#define FMC_Bank4 ((FMC_Bank4_TypeDef *) FMC_Bank4_R_BASE)
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_constants
+ * @{
+ */
+
+ /** @addtogroup Peripheral_Registers_Bits_Definition
+ * @{
+ */
+
+/******************************************************************************/
+/* Peripheral Registers_Bits_Definition */
+/******************************************************************************/
+
+/******************************************************************************/
+/* */
+/* Analog to Digital Converter SAR (ADC) */
+/* */
+/******************************************************************************/
+/******************** Bit definition for ADC_ISR register ********************/
+#define ADC_ISR_ADRD ((uint32_t)0x00000001) /*!< ADC Ready (ADRDY) flag */
+#define ADC_ISR_EOSMP ((uint32_t)0x00000002) /*!< ADC End of Sampling flag */
+#define ADC_ISR_EOC ((uint32_t)0x00000004) /*!< ADC End of Regular Conversion flag */
+#define ADC_ISR_EOS ((uint32_t)0x00000008) /*!< ADC End of Regular sequence of Conversions flag */
+#define ADC_ISR_OVR ((uint32_t)0x00000010) /*!< ADC overrun flag */
+#define ADC_ISR_JEOC ((uint32_t)0x00000020) /*!< ADC End of Injected Conversion flag */
+#define ADC_ISR_JEOS ((uint32_t)0x00000040) /*!< ADC End of Injected sequence of Conversions flag */
+#define ADC_ISR_AWD1 ((uint32_t)0x00000080) /*!< ADC Analog watchdog 1 flag */
+#define ADC_ISR_AWD2 ((uint32_t)0x00000100) /*!< ADC Analog watchdog 2 flag */
+#define ADC_ISR_AWD3 ((uint32_t)0x00000200) /*!< ADC Analog watchdog 3 flag */
+#define ADC_ISR_JQOVF ((uint32_t)0x00000400) /*!< ADC Injected Context Queue Overflow flag */
+
+/******************** Bit definition for ADC_IER register ********************/
+#define ADC_IER_RDY ((uint32_t)0x00000001) /*!< ADC Ready (ADRDY) interrupt source */
+#define ADC_IER_EOSMP ((uint32_t)0x00000002) /*!< ADC End of Sampling interrupt source */
+#define ADC_IER_EOC ((uint32_t)0x00000004) /*!< ADC End of Regular Conversion interrupt source */
+#define ADC_IER_EOS ((uint32_t)0x00000008) /*!< ADC End of Regular sequence of Conversions interrupt source */
+#define ADC_IER_OVR ((uint32_t)0x00000010) /*!< ADC overrun interrupt source */
+#define ADC_IER_JEOC ((uint32_t)0x00000020) /*!< ADC End of Injected Conversion interrupt source */
+#define ADC_IER_JEOS ((uint32_t)0x00000040) /*!< ADC End of Injected sequence of Conversions interrupt source */
+#define ADC_IER_AWD1 ((uint32_t)0x00000080) /*!< ADC Analog watchdog 1 interrupt source */
+#define ADC_IER_AWD2 ((uint32_t)0x00000100) /*!< ADC Analog watchdog 2 interrupt source */
+#define ADC_IER_AWD3 ((uint32_t)0x00000200) /*!< ADC Analog watchdog 3 interrupt source */
+#define ADC_IER_JQOVF ((uint32_t)0x00000400) /*!< ADC Injected Context Queue Overflow interrupt source */
+
+/******************** Bit definition for ADC_CR register ********************/
+#define ADC_CR_ADEN ((uint32_t)0x00000001) /*!< ADC Enable control */
+#define ADC_CR_ADDIS ((uint32_t)0x00000002) /*!< ADC Disable command */
+#define ADC_CR_ADSTART ((uint32_t)0x00000004) /*!< ADC Start of Regular conversion */
+#define ADC_CR_JADSTART ((uint32_t)0x00000008) /*!< ADC Start of injected conversion */
+#define ADC_CR_ADSTP ((uint32_t)0x00000010) /*!< ADC Stop of Regular conversion */
+#define ADC_CR_JADSTP ((uint32_t)0x00000020) /*!< ADC Stop of injected conversion */
+#define ADC_CR_ADVREGEN ((uint32_t)0x30000000) /*!< ADC Voltage regulator Enable */
+#define ADC_CR_ADVREGEN_0 ((uint32_t)0x10000000) /*!< ADC ADVREGEN bit 0 */
+#define ADC_CR_ADVREGEN_1 ((uint32_t)0x20000000) /*!< ADC ADVREGEN bit 1 */
+#define ADC_CR_ADCALDIF ((uint32_t)0x40000000) /*!< ADC Differential Mode for calibration */
+#define ADC_CR_ADCAL ((uint32_t)0x80000000) /*!< ADC Calibration */
+
+/******************** Bit definition for ADC_CFGR register ********************/
+#define ADC_CFGR_DMAEN ((uint32_t)0x00000001) /*!< ADC DMA Enable */
+#define ADC_CFGR_DMACFG ((uint32_t)0x00000002) /*!< ADC DMA configuration */
+
+#define ADC_CFGR_RES ((uint32_t)0x00000018) /*!< ADC Data resolution */
+#define ADC_CFGR_RES_0 ((uint32_t)0x00000008) /*!< ADC RES bit 0 */
+#define ADC_CFGR_RES_1 ((uint32_t)0x00000010) /*!< ADC RES bit 1 */
+
+#define ADC_CFGR_ALIGN ((uint32_t)0x00000020) /*!< ADC Data Alignement */
+
+#define ADC_CFGR_EXTSEL ((uint32_t)0x000003C0) /*!< ADC External trigger selection for regular group */
+#define ADC_CFGR_EXTSEL_0 ((uint32_t)0x00000040) /*!< ADC EXTSEL bit 0 */
+#define ADC_CFGR_EXTSEL_1 ((uint32_t)0x00000080) /*!< ADC EXTSEL bit 1 */
+#define ADC_CFGR_EXTSEL_2 ((uint32_t)0x00000100) /*!< ADC EXTSEL bit 2 */
+#define ADC_CFGR_EXTSEL_3 ((uint32_t)0x00000200) /*!< ADC EXTSEL bit 3 */
+
+#define ADC_CFGR_EXTEN ((uint32_t)0x00000C00) /*!< ADC External trigger enable and polarity selection for regular channels */
+#define ADC_CFGR_EXTEN_0 ((uint32_t)0x00000400) /*!< ADC EXTEN bit 0 */
+#define ADC_CFGR_EXTEN_1 ((uint32_t)0x00000800) /*!< ADC EXTEN bit 1 */
+
+#define ADC_CFGR_OVRMOD ((uint32_t)0x00001000) /*!< ADC overrun mode */
+#define ADC_CFGR_CONT ((uint32_t)0x00002000) /*!< ADC Single/continuous conversion mode for regular conversion */
+#define ADC_CFGR_AUTDLY ((uint32_t)0x00004000) /*!< ADC Delayed conversion mode */
+#define ADC_CFGR_AUTOFF ((uint32_t)0x00008000) /*!< ADC Auto power OFF */
+#define ADC_CFGR_DISCEN ((uint32_t)0x00010000) /*!< ADC Discontinuous mode for regular channels */
+
+#define ADC_CFGR_DISCNUM ((uint32_t)0x000E0000) /*!< ADC Discontinuous mode channel count */
+#define ADC_CFGR_DISCNUM_0 ((uint32_t)0x00020000) /*!< ADC DISCNUM bit 0 */
+#define ADC_CFGR_DISCNUM_1 ((uint32_t)0x00040000) /*!< ADC DISCNUM bit 1 */
+#define ADC_CFGR_DISCNUM_2 ((uint32_t)0x00080000) /*!< ADC DISCNUM bit 2 */
+
+#define ADC_CFGR_JDISCEN ((uint32_t)0x00100000) /*!< ADC Discontinous mode on injected channels */
+#define ADC_CFGR_JQM ((uint32_t)0x00200000) /*!< ADC JSQR Queue mode */
+#define ADC_CFGR_AWD1SGL ((uint32_t)0x00400000) /*!< Eanble the watchdog 1 on a single channel or on all channels */
+#define ADC_CFGR_AWD1EN ((uint32_t)0x00800000) /*!< ADC Analog watchdog 1 enable on regular Channels */
+#define ADC_CFGR_JAWD1EN ((uint32_t)0x01000000) /*!< ADC Analog watchdog 1 enable on injected Channels */
+#define ADC_CFGR_JAUTO ((uint32_t)0x02000000) /*!< ADC Automatic injected group conversion */
+
+#define ADC_CFGR_AWD1CH ((uint32_t)0x7C000000) /*!< ADC Analog watchdog 1 Channel selection */
+#define ADC_CFGR_AWD1CH_0 ((uint32_t)0x04000000) /*!< ADC AWD1CH bit 0 */
+#define ADC_CFGR_AWD1CH_1 ((uint32_t)0x08000000) /*!< ADC AWD1CH bit 1 */
+#define ADC_CFGR_AWD1CH_2 ((uint32_t)0x10000000) /*!< ADC AWD1CH bit 2 */
+#define ADC_CFGR_AWD1CH_3 ((uint32_t)0x20000000) /*!< ADC AWD1CH bit 3 */
+#define ADC_CFGR_AWD1CH_4 ((uint32_t)0x40000000) /*!< ADC AWD1CH bit 4 */
+
+/******************** Bit definition for ADC_SMPR1 register ********************/
+#define ADC_SMPR1_SMP0 ((uint32_t)0x00000007) /*!< ADC Channel 0 Sampling time selection */
+#define ADC_SMPR1_SMP0_0 ((uint32_t)0x00000001) /*!< ADC SMP0 bit 0 */
+#define ADC_SMPR1_SMP0_1 ((uint32_t)0x00000002) /*!< ADC SMP0 bit 1 */
+#define ADC_SMPR1_SMP0_2 ((uint32_t)0x00000004) /*!< ADC SMP0 bit 2 */
+
+#define ADC_SMPR1_SMP1 ((uint32_t)0x00000038) /*!< ADC Channel 1 Sampling time selection */
+#define ADC_SMPR1_SMP1_0 ((uint32_t)0x00000008) /*!< ADC SMP1 bit 0 */
+#define ADC_SMPR1_SMP1_1 ((uint32_t)0x00000010) /*!< ADC SMP1 bit 1 */
+#define ADC_SMPR1_SMP1_2 ((uint32_t)0x00000020) /*!< ADC SMP1 bit 2 */
+
+#define ADC_SMPR1_SMP2 ((uint32_t)0x000001C0) /*!< ADC Channel 2 Sampling time selection */
+#define ADC_SMPR1_SMP2_0 ((uint32_t)0x00000040) /*!< ADC SMP2 bit 0 */
+#define ADC_SMPR1_SMP2_1 ((uint32_t)0x00000080) /*!< ADC SMP2 bit 1 */
+#define ADC_SMPR1_SMP2_2 ((uint32_t)0x00000100) /*!< ADC SMP2 bit 2 */
+
+#define ADC_SMPR1_SMP3 ((uint32_t)0x00000E00) /*!< ADC Channel 3 Sampling time selection */
+#define ADC_SMPR1_SMP3_0 ((uint32_t)0x00000200) /*!< ADC SMP3 bit 0 */
+#define ADC_SMPR1_SMP3_1 ((uint32_t)0x00000400) /*!< ADC SMP3 bit 1 */
+#define ADC_SMPR1_SMP3_2 ((uint32_t)0x00000800) /*!< ADC SMP3 bit 2 */
+
+#define ADC_SMPR1_SMP4 ((uint32_t)0x00007000) /*!< ADC Channel 4 Sampling time selection */
+#define ADC_SMPR1_SMP4_0 ((uint32_t)0x00001000) /*!< ADC SMP4 bit 0 */
+#define ADC_SMPR1_SMP4_1 ((uint32_t)0x00002000) /*!< ADC SMP4 bit 1 */
+#define ADC_SMPR1_SMP4_2 ((uint32_t)0x00004000) /*!< ADC SMP4 bit 2 */
+
+#define ADC_SMPR1_SMP5 ((uint32_t)0x00038000) /*!< ADC Channel 5 Sampling time selection */
+#define ADC_SMPR1_SMP5_0 ((uint32_t)0x00008000) /*!< ADC SMP5 bit 0 */
+#define ADC_SMPR1_SMP5_1 ((uint32_t)0x00010000) /*!< ADC SMP5 bit 1 */
+#define ADC_SMPR1_SMP5_2 ((uint32_t)0x00020000) /*!< ADC SMP5 bit 2 */
+
+#define ADC_SMPR1_SMP6 ((uint32_t)0x001C0000) /*!< ADC Channel 6 Sampling time selection */
+#define ADC_SMPR1_SMP6_0 ((uint32_t)0x00040000) /*!< ADC SMP6 bit 0 */
+#define ADC_SMPR1_SMP6_1 ((uint32_t)0x00080000) /*!< ADC SMP6 bit 1 */
+#define ADC_SMPR1_SMP6_2 ((uint32_t)0x00100000) /*!< ADC SMP6 bit 2 */
+
+#define ADC_SMPR1_SMP7 ((uint32_t)0x00E00000) /*!< ADC Channel 7 Sampling time selection */
+#define ADC_SMPR1_SMP7_0 ((uint32_t)0x00200000) /*!< ADC SMP7 bit 0 */
+#define ADC_SMPR1_SMP7_1 ((uint32_t)0x00400000) /*!< ADC SMP7 bit 1 */
+#define ADC_SMPR1_SMP7_2 ((uint32_t)0x00800000) /*!< ADC SMP7 bit 2 */
+
+#define ADC_SMPR1_SMP8 ((uint32_t)0x07000000) /*!< ADC Channel 8 Sampling time selection */
+#define ADC_SMPR1_SMP8_0 ((uint32_t)0x01000000) /*!< ADC SMP8 bit 0 */
+#define ADC_SMPR1_SMP8_1 ((uint32_t)0x02000000) /*!< ADC SMP8 bit 1 */
+#define ADC_SMPR1_SMP8_2 ((uint32_t)0x04000000) /*!< ADC SMP8 bit 2 */
+
+#define ADC_SMPR1_SMP9 ((uint32_t)0x38000000) /*!< ADC Channel 9 Sampling time selection */
+#define ADC_SMPR1_SMP9_0 ((uint32_t)0x08000000) /*!< ADC SMP9 bit 0 */
+#define ADC_SMPR1_SMP9_1 ((uint32_t)0x10000000) /*!< ADC SMP9 bit 1 */
+#define ADC_SMPR1_SMP9_2 ((uint32_t)0x20000000) /*!< ADC SMP9 bit 2 */
+
+/******************** Bit definition for ADC_SMPR2 register ********************/
+#define ADC_SMPR2_SMP10 ((uint32_t)0x00000007) /*!< ADC Channel 10 Sampling time selection */
+#define ADC_SMPR2_SMP10_0 ((uint32_t)0x00000001) /*!< ADC SMP10 bit 0 */
+#define ADC_SMPR2_SMP10_1 ((uint32_t)0x00000002) /*!< ADC SMP10 bit 1 */
+#define ADC_SMPR2_SMP10_2 ((uint32_t)0x00000004) /*!< ADC SMP10 bit 2 */
+
+#define ADC_SMPR2_SMP11 ((uint32_t)0x00000038) /*!< ADC Channel 11 Sampling time selection */
+#define ADC_SMPR2_SMP11_0 ((uint32_t)0x00000008) /*!< ADC SMP11 bit 0 */
+#define ADC_SMPR2_SMP11_1 ((uint32_t)0x00000010) /*!< ADC SMP11 bit 1 */
+#define ADC_SMPR2_SMP11_2 ((uint32_t)0x00000020) /*!< ADC SMP11 bit 2 */
+
+#define ADC_SMPR2_SMP12 ((uint32_t)0x000001C0) /*!< ADC Channel 12 Sampling time selection */
+#define ADC_SMPR2_SMP12_0 ((uint32_t)0x00000040) /*!< ADC SMP12 bit 0 */
+#define ADC_SMPR2_SMP12_1 ((uint32_t)0x00000080) /*!< ADC SMP12 bit 1 */
+#define ADC_SMPR2_SMP12_2 ((uint32_t)0x00000100) /*!< ADC SMP12 bit 2 */
+
+#define ADC_SMPR2_SMP13 ((uint32_t)0x00000E00) /*!< ADC Channel 13 Sampling time selection */
+#define ADC_SMPR2_SMP13_0 ((uint32_t)0x00000200) /*!< ADC SMP13 bit 0 */
+#define ADC_SMPR2_SMP13_1 ((uint32_t)0x00000400) /*!< ADC SMP13 bit 1 */
+#define ADC_SMPR2_SMP13_2 ((uint32_t)0x00000800) /*!< ADC SMP13 bit 2 */
+
+#define ADC_SMPR2_SMP14 ((uint32_t)0x00007000) /*!< ADC Channel 14 Sampling time selection */
+#define ADC_SMPR2_SMP14_0 ((uint32_t)0x00001000) /*!< ADC SMP14 bit 0 */
+#define ADC_SMPR2_SMP14_1 ((uint32_t)0x00002000) /*!< ADC SMP14 bit 1 */
+#define ADC_SMPR2_SMP14_2 ((uint32_t)0x00004000) /*!< ADC SMP14 bit 2 */
+
+#define ADC_SMPR2_SMP15 ((uint32_t)0x00038000) /*!< ADC Channel 15 Sampling time selection */
+#define ADC_SMPR2_SMP15_0 ((uint32_t)0x00008000) /*!< ADC SMP15 bit 0 */
+#define ADC_SMPR2_SMP15_1 ((uint32_t)0x00010000) /*!< ADC SMP15 bit 1 */
+#define ADC_SMPR2_SMP15_2 ((uint32_t)0x00020000) /*!< ADC SMP15 bit 2 */
+
+#define ADC_SMPR2_SMP16 ((uint32_t)0x001C0000) /*!< ADC Channel 16 Sampling time selection */
+#define ADC_SMPR2_SMP16_0 ((uint32_t)0x00040000) /*!< ADC SMP16 bit 0 */
+#define ADC_SMPR2_SMP16_1 ((uint32_t)0x00080000) /*!< ADC SMP16 bit 1 */
+#define ADC_SMPR2_SMP16_2 ((uint32_t)0x00100000) /*!< ADC SMP16 bit 2 */
+
+#define ADC_SMPR2_SMP17 ((uint32_t)0x00E00000) /*!< ADC Channel 17 Sampling time selection */
+#define ADC_SMPR2_SMP17_0 ((uint32_t)0x00200000) /*!< ADC SMP17 bit 0 */
+#define ADC_SMPR2_SMP17_1 ((uint32_t)0x00400000) /*!< ADC SMP17 bit 1 */
+#define ADC_SMPR2_SMP17_2 ((uint32_t)0x00800000) /*!< ADC SMP17 bit 2 */
+
+#define ADC_SMPR2_SMP18 ((uint32_t)0x07000000) /*!< ADC Channel 18 Sampling time selection */
+#define ADC_SMPR2_SMP18_0 ((uint32_t)0x01000000) /*!< ADC SMP18 bit 0 */
+#define ADC_SMPR2_SMP18_1 ((uint32_t)0x02000000) /*!< ADC SMP18 bit 1 */
+#define ADC_SMPR2_SMP18_2 ((uint32_t)0x04000000) /*!< ADC SMP18 bit 2 */
+
+/******************** Bit definition for ADC_TR1 register ********************/
+#define ADC_TR1_LT1 ((uint32_t)0x00000FFF) /*!< ADC Analog watchdog 1 lower threshold */
+#define ADC_TR1_LT1_0 ((uint32_t)0x00000001) /*!< ADC LT1 bit 0 */
+#define ADC_TR1_LT1_1 ((uint32_t)0x00000002) /*!< ADC LT1 bit 1 */
+#define ADC_TR1_LT1_2 ((uint32_t)0x00000004) /*!< ADC LT1 bit 2 */
+#define ADC_TR1_LT1_3 ((uint32_t)0x00000008) /*!< ADC LT1 bit 3 */
+#define ADC_TR1_LT1_4 ((uint32_t)0x00000010) /*!< ADC LT1 bit 4 */
+#define ADC_TR1_LT1_5 ((uint32_t)0x00000020) /*!< ADC LT1 bit 5 */
+#define ADC_TR1_LT1_6 ((uint32_t)0x00000040) /*!< ADC LT1 bit 6 */
+#define ADC_TR1_LT1_7 ((uint32_t)0x00000080) /*!< ADC LT1 bit 7 */
+#define ADC_TR1_LT1_8 ((uint32_t)0x00000100) /*!< ADC LT1 bit 8 */
+#define ADC_TR1_LT1_9 ((uint32_t)0x00000200) /*!< ADC LT1 bit 9 */
+#define ADC_TR1_LT1_10 ((uint32_t)0x00000400) /*!< ADC LT1 bit 10 */
+#define ADC_TR1_LT1_11 ((uint32_t)0x00000800) /*!< ADC LT1 bit 11 */
+
+#define ADC_TR1_HT1 ((uint32_t)0x0FFF0000) /*!< ADC Analog watchdog 1 higher threshold */
+#define ADC_TR1_HT1_0 ((uint32_t)0x00010000) /*!< ADC HT1 bit 0 */
+#define ADC_TR1_HT1_1 ((uint32_t)0x00020000) /*!< ADC HT1 bit 1 */
+#define ADC_TR1_HT1_2 ((uint32_t)0x00040000) /*!< ADC HT1 bit 2 */
+#define ADC_TR1_HT1_3 ((uint32_t)0x00080000) /*!< ADC HT1 bit 3 */
+#define ADC_TR1_HT1_4 ((uint32_t)0x00100000) /*!< ADC HT1 bit 4 */
+#define ADC_TR1_HT1_5 ((uint32_t)0x00200000) /*!< ADC HT1 bit 5 */
+#define ADC_TR1_HT1_6 ((uint32_t)0x00400000) /*!< ADC HT1 bit 6 */
+#define ADC_TR1_HT1_7 ((uint32_t)0x00800000) /*!< ADC HT1 bit 7 */
+#define ADC_TR1_HT1_8 ((uint32_t)0x01000000) /*!< ADC HT1 bit 8 */
+#define ADC_TR1_HT1_9 ((uint32_t)0x02000000) /*!< ADC HT1 bit 9 */
+#define ADC_TR1_HT1_10 ((uint32_t)0x04000000) /*!< ADC HT1 bit 10 */
+#define ADC_TR1_HT1_11 ((uint32_t)0x08000000) /*!< ADC HT1 bit 11 */
+
+/******************** Bit definition for ADC_TR2 register ********************/
+#define ADC_TR2_LT2 ((uint32_t)0x000000FF) /*!< ADC Analog watchdog 2 lower threshold */
+#define ADC_TR2_LT2_0 ((uint32_t)0x00000001) /*!< ADC LT2 bit 0 */
+#define ADC_TR2_LT2_1 ((uint32_t)0x00000002) /*!< ADC LT2 bit 1 */
+#define ADC_TR2_LT2_2 ((uint32_t)0x00000004) /*!< ADC LT2 bit 2 */
+#define ADC_TR2_LT2_3 ((uint32_t)0x00000008) /*!< ADC LT2 bit 3 */
+#define ADC_TR2_LT2_4 ((uint32_t)0x00000010) /*!< ADC LT2 bit 4 */
+#define ADC_TR2_LT2_5 ((uint32_t)0x00000020) /*!< ADC LT2 bit 5 */
+#define ADC_TR2_LT2_6 ((uint32_t)0x00000040) /*!< ADC LT2 bit 6 */
+#define ADC_TR2_LT2_7 ((uint32_t)0x00000080) /*!< ADC LT2 bit 7 */
+
+#define ADC_TR2_HT2 ((uint32_t)0x00FF0000) /*!< ADC Analog watchdog 2 higher threshold */
+#define ADC_TR2_HT2_0 ((uint32_t)0x00010000) /*!< ADC HT2 bit 0 */
+#define ADC_TR2_HT2_1 ((uint32_t)0x00020000) /*!< ADC HT2 bit 1 */
+#define ADC_TR2_HT2_2 ((uint32_t)0x00040000) /*!< ADC HT2 bit 2 */
+#define ADC_TR2_HT2_3 ((uint32_t)0x00080000) /*!< ADC HT2 bit 3 */
+#define ADC_TR2_HT2_4 ((uint32_t)0x00100000) /*!< ADC HT2 bit 4 */
+#define ADC_TR2_HT2_5 ((uint32_t)0x00200000) /*!< ADC HT2 bit 5 */
+#define ADC_TR2_HT2_6 ((uint32_t)0x00400000) /*!< ADC HT2 bit 6 */
+#define ADC_TR2_HT2_7 ((uint32_t)0x00800000) /*!< ADC HT2 bit 7 */
+
+/******************** Bit definition for ADC_TR3 register ********************/
+#define ADC_TR3_LT3 ((uint32_t)0x000000FF) /*!< ADC Analog watchdog 3 lower threshold */
+#define ADC_TR3_LT3_0 ((uint32_t)0x00000001) /*!< ADC LT3 bit 0 */
+#define ADC_TR3_LT3_1 ((uint32_t)0x00000002) /*!< ADC LT3 bit 1 */
+#define ADC_TR3_LT3_2 ((uint32_t)0x00000004) /*!< ADC LT3 bit 2 */
+#define ADC_TR3_LT3_3 ((uint32_t)0x00000008) /*!< ADC LT3 bit 3 */
+#define ADC_TR3_LT3_4 ((uint32_t)0x00000010) /*!< ADC LT3 bit 4 */
+#define ADC_TR3_LT3_5 ((uint32_t)0x00000020) /*!< ADC LT3 bit 5 */
+#define ADC_TR3_LT3_6 ((uint32_t)0x00000040) /*!< ADC LT3 bit 6 */
+#define ADC_TR3_LT3_7 ((uint32_t)0x00000080) /*!< ADC LT3 bit 7 */
+
+#define ADC_TR3_HT3 ((uint32_t)0x00FF0000) /*!< ADC Analog watchdog 3 higher threshold */
+#define ADC_TR3_HT3_0 ((uint32_t)0x00010000) /*!< ADC HT3 bit 0 */
+#define ADC_TR3_HT3_1 ((uint32_t)0x00020000) /*!< ADC HT3 bit 1 */
+#define ADC_TR3_HT3_2 ((uint32_t)0x00040000) /*!< ADC HT3 bit 2 */
+#define ADC_TR3_HT3_3 ((uint32_t)0x00080000) /*!< ADC HT3 bit 3 */
+#define ADC_TR3_HT3_4 ((uint32_t)0x00100000) /*!< ADC HT3 bit 4 */
+#define ADC_TR3_HT3_5 ((uint32_t)0x00200000) /*!< ADC HT3 bit 5 */
+#define ADC_TR3_HT3_6 ((uint32_t)0x00400000) /*!< ADC HT3 bit 6 */
+#define ADC_TR3_HT3_7 ((uint32_t)0x00800000) /*!< ADC HT3 bit 7 */
+
+/******************** Bit definition for ADC_SQR1 register ********************/
+#define ADC_SQR1_L ((uint32_t)0x0000000F) /*!< ADC regular channel sequence lenght */
+#define ADC_SQR1_L_0 ((uint32_t)0x00000001) /*!< ADC L bit 0 */
+#define ADC_SQR1_L_1 ((uint32_t)0x00000002) /*!< ADC L bit 1 */
+#define ADC_SQR1_L_2 ((uint32_t)0x00000004) /*!< ADC L bit 2 */
+#define ADC_SQR1_L_3 ((uint32_t)0x00000008) /*!< ADC L bit 3 */
+
+#define ADC_SQR1_SQ1 ((uint32_t)0x000007C0) /*!< ADC 1st conversion in regular sequence */
+#define ADC_SQR1_SQ1_0 ((uint32_t)0x00000040) /*!< ADC SQ1 bit 0 */
+#define ADC_SQR1_SQ1_1 ((uint32_t)0x00000080) /*!< ADC SQ1 bit 1 */
+#define ADC_SQR1_SQ1_2 ((uint32_t)0x00000100) /*!< ADC SQ1 bit 2 */
+#define ADC_SQR1_SQ1_3 ((uint32_t)0x00000200) /*!< ADC SQ1 bit 3 */
+#define ADC_SQR1_SQ1_4 ((uint32_t)0x00000400) /*!< ADC SQ1 bit 4 */
+
+#define ADC_SQR1_SQ2 ((uint32_t)0x0001F000) /*!< ADC 2nd conversion in regular sequence */
+#define ADC_SQR1_SQ2_0 ((uint32_t)0x00001000) /*!< ADC SQ2 bit 0 */
+#define ADC_SQR1_SQ2_1 ((uint32_t)0x00002000) /*!< ADC SQ2 bit 1 */
+#define ADC_SQR1_SQ2_2 ((uint32_t)0x00004000) /*!< ADC SQ2 bit 2 */
+#define ADC_SQR1_SQ2_3 ((uint32_t)0x00008000) /*!< ADC SQ2 bit 3 */
+#define ADC_SQR1_SQ2_4 ((uint32_t)0x00010000) /*!< ADC SQ2 bit 4 */
+
+#define ADC_SQR1_SQ3 ((uint32_t)0x007C0000) /*!< ADC 3rd conversion in regular sequence */
+#define ADC_SQR1_SQ3_0 ((uint32_t)0x00040000) /*!< ADC SQ3 bit 0 */
+#define ADC_SQR1_SQ3_1 ((uint32_t)0x00080000) /*!< ADC SQ3 bit 1 */
+#define ADC_SQR1_SQ3_2 ((uint32_t)0x00100000) /*!< ADC SQ3 bit 2 */
+#define ADC_SQR1_SQ3_3 ((uint32_t)0x00200000) /*!< ADC SQ3 bit 3 */
+#define ADC_SQR1_SQ3_4 ((uint32_t)0x00400000) /*!< ADC SQ3 bit 4 */
+
+#define ADC_SQR1_SQ4 ((uint32_t)0x1F000000) /*!< ADC 4th conversion in regular sequence */
+#define ADC_SQR1_SQ4_0 ((uint32_t)0x01000000) /*!< ADC SQ4 bit 0 */
+#define ADC_SQR1_SQ4_1 ((uint32_t)0x02000000) /*!< ADC SQ4 bit 1 */
+#define ADC_SQR1_SQ4_2 ((uint32_t)0x04000000) /*!< ADC SQ4 bit 2 */
+#define ADC_SQR1_SQ4_3 ((uint32_t)0x08000000) /*!< ADC SQ4 bit 3 */
+#define ADC_SQR1_SQ4_4 ((uint32_t)0x10000000) /*!< ADC SQ4 bit 4 */
+
+/******************** Bit definition for ADC_SQR2 register ********************/
+#define ADC_SQR2_SQ5 ((uint32_t)0x0000001F) /*!< ADC 5th conversion in regular sequence */
+#define ADC_SQR2_SQ5_0 ((uint32_t)0x00000001) /*!< ADC SQ5 bit 0 */
+#define ADC_SQR2_SQ5_1 ((uint32_t)0x00000002) /*!< ADC SQ5 bit 1 */
+#define ADC_SQR2_SQ5_2 ((uint32_t)0x00000004) /*!< ADC SQ5 bit 2 */
+#define ADC_SQR2_SQ5_3 ((uint32_t)0x00000008) /*!< ADC SQ5 bit 3 */
+#define ADC_SQR2_SQ5_4 ((uint32_t)0x00000010) /*!< ADC SQ5 bit 4 */
+
+#define ADC_SQR2_SQ6 ((uint32_t)0x000007C0) /*!< ADC 6th conversion in regular sequence */
+#define ADC_SQR2_SQ6_0 ((uint32_t)0x00000040) /*!< ADC SQ6 bit 0 */
+#define ADC_SQR2_SQ6_1 ((uint32_t)0x00000080) /*!< ADC SQ6 bit 1 */
+#define ADC_SQR2_SQ6_2 ((uint32_t)0x00000100) /*!< ADC SQ6 bit 2 */
+#define ADC_SQR2_SQ6_3 ((uint32_t)0x00000200) /*!< ADC SQ6 bit 3 */
+#define ADC_SQR2_SQ6_4 ((uint32_t)0x00000400) /*!< ADC SQ6 bit 4 */
+
+#define ADC_SQR2_SQ7 ((uint32_t)0x0001F000) /*!< ADC 7th conversion in regular sequence */
+#define ADC_SQR2_SQ7_0 ((uint32_t)0x00001000) /*!< ADC SQ7 bit 0 */
+#define ADC_SQR2_SQ7_1 ((uint32_t)0x00002000) /*!< ADC SQ7 bit 1 */
+#define ADC_SQR2_SQ7_2 ((uint32_t)0x00004000) /*!< ADC SQ7 bit 2 */
+#define ADC_SQR2_SQ7_3 ((uint32_t)0x00008000) /*!< ADC SQ7 bit 3 */
+#define ADC_SQR2_SQ7_4 ((uint32_t)0x00010000) /*!< ADC SQ7 bit 4 */
+
+#define ADC_SQR2_SQ8 ((uint32_t)0x007C0000) /*!< ADC 8th conversion in regular sequence */
+#define ADC_SQR2_SQ8_0 ((uint32_t)0x00040000) /*!< ADC SQ8 bit 0 */
+#define ADC_SQR2_SQ8_1 ((uint32_t)0x00080000) /*!< ADC SQ8 bit 1 */
+#define ADC_SQR2_SQ8_2 ((uint32_t)0x00100000) /*!< ADC SQ8 bit 2 */
+#define ADC_SQR2_SQ8_3 ((uint32_t)0x00200000) /*!< ADC SQ8 bit 3 */
+#define ADC_SQR2_SQ8_4 ((uint32_t)0x00400000) /*!< ADC SQ8 bit 4 */
+
+#define ADC_SQR2_SQ9 ((uint32_t)0x1F000000) /*!< ADC 9th conversion in regular sequence */
+#define ADC_SQR2_SQ9_0 ((uint32_t)0x01000000) /*!< ADC SQ9 bit 0 */
+#define ADC_SQR2_SQ9_1 ((uint32_t)0x02000000) /*!< ADC SQ9 bit 1 */
+#define ADC_SQR2_SQ9_2 ((uint32_t)0x04000000) /*!< ADC SQ9 bit 2 */
+#define ADC_SQR2_SQ9_3 ((uint32_t)0x08000000) /*!< ADC SQ9 bit 3 */
+#define ADC_SQR2_SQ9_4 ((uint32_t)0x10000000) /*!< ADC SQ9 bit 4 */
+
+/******************** Bit definition for ADC_SQR3 register ********************/
+#define ADC_SQR3_SQ10 ((uint32_t)0x0000001F) /*!< ADC 10th conversion in regular sequence */
+#define ADC_SQR3_SQ10_0 ((uint32_t)0x00000001) /*!< ADC SQ10 bit 0 */
+#define ADC_SQR3_SQ10_1 ((uint32_t)0x00000002) /*!< ADC SQ10 bit 1 */
+#define ADC_SQR3_SQ10_2 ((uint32_t)0x00000004) /*!< ADC SQ10 bit 2 */
+#define ADC_SQR3_SQ10_3 ((uint32_t)0x00000008) /*!< ADC SQ10 bit 3 */
+#define ADC_SQR3_SQ10_4 ((uint32_t)0x00000010) /*!< ADC SQ10 bit 4 */
+
+#define ADC_SQR3_SQ11 ((uint32_t)0x000007C0) /*!< ADC 11th conversion in regular sequence */
+#define ADC_SQR3_SQ11_0 ((uint32_t)0x00000040) /*!< ADC SQ11 bit 0 */
+#define ADC_SQR3_SQ11_1 ((uint32_t)0x00000080) /*!< ADC SQ11 bit 1 */
+#define ADC_SQR3_SQ11_2 ((uint32_t)0x00000100) /*!< ADC SQ11 bit 2 */
+#define ADC_SQR3_SQ11_3 ((uint32_t)0x00000200) /*!< ADC SQ11 bit 3 */
+#define ADC_SQR3_SQ11_4 ((uint32_t)0x00000400) /*!< ADC SQ11 bit 4 */
+
+#define ADC_SQR3_SQ12 ((uint32_t)0x0001F000) /*!< ADC 12th conversion in regular sequence */
+#define ADC_SQR3_SQ12_0 ((uint32_t)0x00001000) /*!< ADC SQ12 bit 0 */
+#define ADC_SQR3_SQ12_1 ((uint32_t)0x00002000) /*!< ADC SQ12 bit 1 */
+#define ADC_SQR3_SQ12_2 ((uint32_t)0x00004000) /*!< ADC SQ12 bit 2 */
+#define ADC_SQR3_SQ12_3 ((uint32_t)0x00008000) /*!< ADC SQ12 bit 3 */
+#define ADC_SQR3_SQ12_4 ((uint32_t)0x00010000) /*!< ADC SQ12 bit 4 */
+
+#define ADC_SQR3_SQ13 ((uint32_t)0x007C0000) /*!< ADC 13th conversion in regular sequence */
+#define ADC_SQR3_SQ13_0 ((uint32_t)0x00040000) /*!< ADC SQ13 bit 0 */
+#define ADC_SQR3_SQ13_1 ((uint32_t)0x00080000) /*!< ADC SQ13 bit 1 */
+#define ADC_SQR3_SQ13_2 ((uint32_t)0x00100000) /*!< ADC SQ13 bit 2 */
+#define ADC_SQR3_SQ13_3 ((uint32_t)0x00200000) /*!< ADC SQ13 bit 3 */
+#define ADC_SQR3_SQ13_4 ((uint32_t)0x00400000) /*!< ADC SQ13 bit 4 */
+
+#define ADC_SQR3_SQ14 ((uint32_t)0x1F000000) /*!< ADC 14th conversion in regular sequence */
+#define ADC_SQR3_SQ14_0 ((uint32_t)0x01000000) /*!< ADC SQ14 bit 0 */
+#define ADC_SQR3_SQ14_1 ((uint32_t)0x02000000) /*!< ADC SQ14 bit 1 */
+#define ADC_SQR3_SQ14_2 ((uint32_t)0x04000000) /*!< ADC SQ14 bit 2 */
+#define ADC_SQR3_SQ14_3 ((uint32_t)0x08000000) /*!< ADC SQ14 bit 3 */
+#define ADC_SQR3_SQ14_4 ((uint32_t)0x10000000) /*!< ADC SQ14 bit 4 */
+
+/******************** Bit definition for ADC_SQR4 register ********************/
+#define ADC_SQR4_SQ15 ((uint32_t)0x0000001F) /*!< ADC 15th conversion in regular sequence */
+#define ADC_SQR4_SQ15_0 ((uint32_t)0x00000001) /*!< ADC SQ15 bit 0 */
+#define ADC_SQR4_SQ15_1 ((uint32_t)0x00000002) /*!< ADC SQ15 bit 1 */
+#define ADC_SQR4_SQ15_2 ((uint32_t)0x00000004) /*!< ADC SQ15 bit 2 */
+#define ADC_SQR4_SQ15_3 ((uint32_t)0x00000008) /*!< ADC SQ15 bit 3 */
+#define ADC_SQR4_SQ15_4 ((uint32_t)0x00000010) /*!< ADC SQ105 bit 4 */
+
+#define ADC_SQR4_SQ16 ((uint32_t)0x000007C0) /*!< ADC 16th conversion in regular sequence */
+#define ADC_SQR4_SQ16_0 ((uint32_t)0x00000040) /*!< ADC SQ16 bit 0 */
+#define ADC_SQR4_SQ16_1 ((uint32_t)0x00000080) /*!< ADC SQ16 bit 1 */
+#define ADC_SQR4_SQ16_2 ((uint32_t)0x00000100) /*!< ADC SQ16 bit 2 */
+#define ADC_SQR4_SQ16_3 ((uint32_t)0x00000200) /*!< ADC SQ16 bit 3 */
+#define ADC_SQR4_SQ16_4 ((uint32_t)0x00000400) /*!< ADC SQ16 bit 4 */
+/******************** Bit definition for ADC_DR register ********************/
+#define ADC_DR_RDATA ((uint32_t)0x0000FFFF) /*!< ADC regular Data converted */
+#define ADC_DR_RDATA_0 ((uint32_t)0x00000001) /*!< ADC RDATA bit 0 */
+#define ADC_DR_RDATA_1 ((uint32_t)0x00000002) /*!< ADC RDATA bit 1 */
+#define ADC_DR_RDATA_2 ((uint32_t)0x00000004) /*!< ADC RDATA bit 2 */
+#define ADC_DR_RDATA_3 ((uint32_t)0x00000008) /*!< ADC RDATA bit 3 */
+#define ADC_DR_RDATA_4 ((uint32_t)0x00000010) /*!< ADC RDATA bit 4 */
+#define ADC_DR_RDATA_5 ((uint32_t)0x00000020) /*!< ADC RDATA bit 5 */
+#define ADC_DR_RDATA_6 ((uint32_t)0x00000040) /*!< ADC RDATA bit 6 */
+#define ADC_DR_RDATA_7 ((uint32_t)0x00000080) /*!< ADC RDATA bit 7 */
+#define ADC_DR_RDATA_8 ((uint32_t)0x00000100) /*!< ADC RDATA bit 8 */
+#define ADC_DR_RDATA_9 ((uint32_t)0x00000200) /*!< ADC RDATA bit 9 */
+#define ADC_DR_RDATA_10 ((uint32_t)0x00000400) /*!< ADC RDATA bit 10 */
+#define ADC_DR_RDATA_11 ((uint32_t)0x00000800) /*!< ADC RDATA bit 11 */
+#define ADC_DR_RDATA_12 ((uint32_t)0x00001000) /*!< ADC RDATA bit 12 */
+#define ADC_DR_RDATA_13 ((uint32_t)0x00002000) /*!< ADC RDATA bit 13 */
+#define ADC_DR_RDATA_14 ((uint32_t)0x00004000) /*!< ADC RDATA bit 14 */
+#define ADC_DR_RDATA_15 ((uint32_t)0x00008000) /*!< ADC RDATA bit 15 */
+
+/******************** Bit definition for ADC_JSQR register ********************/
+#define ADC_JSQR_JL ((uint32_t)0x00000003) /*!< ADC injected channel sequence length */
+#define ADC_JSQR_JL_0 ((uint32_t)0x00000001) /*!< ADC JL bit 0 */
+#define ADC_JSQR_JL_1 ((uint32_t)0x00000002) /*!< ADC JL bit 1 */
+
+#define ADC_JSQR_JEXTSEL ((uint32_t)0x0000003C) /*!< ADC external trigger selection for injected group */
+#define ADC_JSQR_JEXTSEL_0 ((uint32_t)0x00000004) /*!< ADC JEXTSEL bit 0 */
+#define ADC_JSQR_JEXTSEL_1 ((uint32_t)0x00000008) /*!< ADC JEXTSEL bit 1 */
+#define ADC_JSQR_JEXTSEL_2 ((uint32_t)0x00000010) /*!< ADC JEXTSEL bit 2 */
+#define ADC_JSQR_JEXTSEL_3 ((uint32_t)0x00000020) /*!< ADC JEXTSEL bit 3 */
+
+#define ADC_JSQR_JEXTEN ((uint32_t)0x000000C0) /*!< ADC external trigger enable and polarity selection for injected channels */
+#define ADC_JSQR_JEXTEN_0 ((uint32_t)0x00000040) /*!< ADC JEXTEN bit 0 */
+#define ADC_JSQR_JEXTEN_1 ((uint32_t)0x00000080) /*!< ADC JEXTEN bit 1 */
+
+#define ADC_JSQR_JSQ1 ((uint32_t)0x00001F00) /*!< ADC 1st conversion in injected sequence */
+#define ADC_JSQR_JSQ1_0 ((uint32_t)0x00000100) /*!< ADC JSQ1 bit 0 */
+#define ADC_JSQR_JSQ1_1 ((uint32_t)0x00000200) /*!< ADC JSQ1 bit 1 */
+#define ADC_JSQR_JSQ1_2 ((uint32_t)0x00000400) /*!< ADC JSQ1 bit 2 */
+#define ADC_JSQR_JSQ1_3 ((uint32_t)0x00000800) /*!< ADC JSQ1 bit 3 */
+#define ADC_JSQR_JSQ1_4 ((uint32_t)0x00001000) /*!< ADC JSQ1 bit 4 */
+
+#define ADC_JSQR_JSQ2 ((uint32_t)0x0007C000) /*!< ADC 2nd conversion in injected sequence */
+#define ADC_JSQR_JSQ2_0 ((uint32_t)0x00004000) /*!< ADC JSQ2 bit 0 */
+#define ADC_JSQR_JSQ2_1 ((uint32_t)0x00008000) /*!< ADC JSQ2 bit 1 */
+#define ADC_JSQR_JSQ2_2 ((uint32_t)0x00010000) /*!< ADC JSQ2 bit 2 */
+#define ADC_JSQR_JSQ2_3 ((uint32_t)0x00020000) /*!< ADC JSQ2 bit 3 */
+#define ADC_JSQR_JSQ2_4 ((uint32_t)0x00040000) /*!< ADC JSQ2 bit 4 */
+
+#define ADC_JSQR_JSQ3 ((uint32_t)0x01F00000) /*!< ADC 3rd conversion in injected sequence */
+#define ADC_JSQR_JSQ3_0 ((uint32_t)0x00100000) /*!< ADC JSQ3 bit 0 */
+#define ADC_JSQR_JSQ3_1 ((uint32_t)0x00200000) /*!< ADC JSQ3 bit 1 */
+#define ADC_JSQR_JSQ3_2 ((uint32_t)0x00400000) /*!< ADC JSQ3 bit 2 */
+#define ADC_JSQR_JSQ3_3 ((uint32_t)0x00800000) /*!< ADC JSQ3 bit 3 */
+#define ADC_JSQR_JSQ3_4 ((uint32_t)0x01000000) /*!< ADC JSQ3 bit 4 */
+
+#define ADC_JSQR_JSQ4 ((uint32_t)0x7C000000) /*!< ADC 4th conversion in injected sequence */
+#define ADC_JSQR_JSQ4_0 ((uint32_t)0x04000000) /*!< ADC JSQ4 bit 0 */
+#define ADC_JSQR_JSQ4_1 ((uint32_t)0x08000000) /*!< ADC JSQ4 bit 1 */
+#define ADC_JSQR_JSQ4_2 ((uint32_t)0x10000000) /*!< ADC JSQ4 bit 2 */
+#define ADC_JSQR_JSQ4_3 ((uint32_t)0x20000000) /*!< ADC JSQ4 bit 3 */
+#define ADC_JSQR_JSQ4_4 ((uint32_t)0x40000000) /*!< ADC JSQ4 bit 4 */
+
+/******************** Bit definition for ADC_OFR1 register ********************/
+#define ADC_OFR1_OFFSET1 ((uint32_t)0x00000FFF) /*!< ADC data offset 1 for channel programmed into bits OFFSET1_CH[4:0] */
+#define ADC_OFR1_OFFSET1_0 ((uint32_t)0x00000001) /*!< ADC OFFSET1 bit 0 */
+#define ADC_OFR1_OFFSET1_1 ((uint32_t)0x00000002) /*!< ADC OFFSET1 bit 1 */
+#define ADC_OFR1_OFFSET1_2 ((uint32_t)0x00000004) /*!< ADC OFFSET1 bit 2 */
+#define ADC_OFR1_OFFSET1_3 ((uint32_t)0x00000008) /*!< ADC OFFSET1 bit 3 */
+#define ADC_OFR1_OFFSET1_4 ((uint32_t)0x00000010) /*!< ADC OFFSET1 bit 4 */
+#define ADC_OFR1_OFFSET1_5 ((uint32_t)0x00000020) /*!< ADC OFFSET1 bit 5 */
+#define ADC_OFR1_OFFSET1_6 ((uint32_t)0x00000040) /*!< ADC OFFSET1 bit 6 */
+#define ADC_OFR1_OFFSET1_7 ((uint32_t)0x00000080) /*!< ADC OFFSET1 bit 7 */
+#define ADC_OFR1_OFFSET1_8 ((uint32_t)0x00000100) /*!< ADC OFFSET1 bit 8 */
+#define ADC_OFR1_OFFSET1_9 ((uint32_t)0x00000200) /*!< ADC OFFSET1 bit 9 */
+#define ADC_OFR1_OFFSET1_10 ((uint32_t)0x00000400) /*!< ADC OFFSET1 bit 10 */
+#define ADC_OFR1_OFFSET1_11 ((uint32_t)0x00000800) /*!< ADC OFFSET1 bit 11 */
+
+#define ADC_OFR1_OFFSET1_CH ((uint32_t)0x7C000000) /*!< ADC Channel selection for the data offset 1 */
+#define ADC_OFR1_OFFSET1_CH_0 ((uint32_t)0x04000000) /*!< ADC OFFSET1_CH bit 0 */
+#define ADC_OFR1_OFFSET1_CH_1 ((uint32_t)0x08000000) /*!< ADC OFFSET1_CH bit 1 */
+#define ADC_OFR1_OFFSET1_CH_2 ((uint32_t)0x10000000) /*!< ADC OFFSET1_CH bit 2 */
+#define ADC_OFR1_OFFSET1_CH_3 ((uint32_t)0x20000000) /*!< ADC OFFSET1_CH bit 3 */
+#define ADC_OFR1_OFFSET1_CH_4 ((uint32_t)0x40000000) /*!< ADC OFFSET1_CH bit 4 */
+
+#define ADC_OFR1_OFFSET1_EN ((uint32_t)0x80000000) /*!< ADC offset 1 enable */
+
+/******************** Bit definition for ADC_OFR2 register ********************/
+#define ADC_OFR2_OFFSET2 ((uint32_t)0x00000FFF) /*!< ADC data offset 2 for channel programmed into bits OFFSET2_CH[4:0] */
+#define ADC_OFR2_OFFSET2_0 ((uint32_t)0x00000001) /*!< ADC OFFSET2 bit 0 */
+#define ADC_OFR2_OFFSET2_1 ((uint32_t)0x00000002) /*!< ADC OFFSET2 bit 1 */
+#define ADC_OFR2_OFFSET2_2 ((uint32_t)0x00000004) /*!< ADC OFFSET2 bit 2 */
+#define ADC_OFR2_OFFSET2_3 ((uint32_t)0x00000008) /*!< ADC OFFSET2 bit 3 */
+#define ADC_OFR2_OFFSET2_4 ((uint32_t)0x00000010) /*!< ADC OFFSET2 bit 4 */
+#define ADC_OFR2_OFFSET2_5 ((uint32_t)0x00000020) /*!< ADC OFFSET2 bit 5 */
+#define ADC_OFR2_OFFSET2_6 ((uint32_t)0x00000040) /*!< ADC OFFSET2 bit 6 */
+#define ADC_OFR2_OFFSET2_7 ((uint32_t)0x00000080) /*!< ADC OFFSET2 bit 7 */
+#define ADC_OFR2_OFFSET2_8 ((uint32_t)0x00000100) /*!< ADC OFFSET2 bit 8 */
+#define ADC_OFR2_OFFSET2_9 ((uint32_t)0x00000200) /*!< ADC OFFSET2 bit 9 */
+#define ADC_OFR2_OFFSET2_10 ((uint32_t)0x00000400) /*!< ADC OFFSET2 bit 10 */
+#define ADC_OFR2_OFFSET2_11 ((uint32_t)0x00000800) /*!< ADC OFFSET2 bit 11 */
+
+#define ADC_OFR2_OFFSET2_CH ((uint32_t)0x7C000000) /*!< ADC Channel selection for the data offset 2 */
+#define ADC_OFR2_OFFSET2_CH_0 ((uint32_t)0x04000000) /*!< ADC OFFSET2_CH bit 0 */
+#define ADC_OFR2_OFFSET2_CH_1 ((uint32_t)0x08000000) /*!< ADC OFFSET2_CH bit 1 */
+#define ADC_OFR2_OFFSET2_CH_2 ((uint32_t)0x10000000) /*!< ADC OFFSET2_CH bit 2 */
+#define ADC_OFR2_OFFSET2_CH_3 ((uint32_t)0x20000000) /*!< ADC OFFSET2_CH bit 3 */
+#define ADC_OFR2_OFFSET2_CH_4 ((uint32_t)0x40000000) /*!< ADC OFFSET2_CH bit 4 */
+
+#define ADC_OFR2_OFFSET2_EN ((uint32_t)0x80000000) /*!< ADC offset 2 enable */
+
+/******************** Bit definition for ADC_OFR3 register ********************/
+#define ADC_OFR3_OFFSET3 ((uint32_t)0x00000FFF) /*!< ADC data offset 3 for channel programmed into bits OFFSET3_CH[4:0] */
+#define ADC_OFR3_OFFSET3_0 ((uint32_t)0x00000001) /*!< ADC OFFSET3 bit 0 */
+#define ADC_OFR3_OFFSET3_1 ((uint32_t)0x00000002) /*!< ADC OFFSET3 bit 1 */
+#define ADC_OFR3_OFFSET3_2 ((uint32_t)0x00000004) /*!< ADC OFFSET3 bit 2 */
+#define ADC_OFR3_OFFSET3_3 ((uint32_t)0x00000008) /*!< ADC OFFSET3 bit 3 */
+#define ADC_OFR3_OFFSET3_4 ((uint32_t)0x00000010) /*!< ADC OFFSET3 bit 4 */
+#define ADC_OFR3_OFFSET3_5 ((uint32_t)0x00000020) /*!< ADC OFFSET3 bit 5 */
+#define ADC_OFR3_OFFSET3_6 ((uint32_t)0x00000040) /*!< ADC OFFSET3 bit 6 */
+#define ADC_OFR3_OFFSET3_7 ((uint32_t)0x00000080) /*!< ADC OFFSET3 bit 7 */
+#define ADC_OFR3_OFFSET3_8 ((uint32_t)0x00000100) /*!< ADC OFFSET3 bit 8 */
+#define ADC_OFR3_OFFSET3_9 ((uint32_t)0x00000200) /*!< ADC OFFSET3 bit 9 */
+#define ADC_OFR3_OFFSET3_10 ((uint32_t)0x00000400) /*!< ADC OFFSET3 bit 10 */
+#define ADC_OFR3_OFFSET3_11 ((uint32_t)0x00000800) /*!< ADC OFFSET3 bit 11 */
+
+#define ADC_OFR3_OFFSET3_CH ((uint32_t)0x7C000000) /*!< ADC Channel selection for the data offset 3 */
+#define ADC_OFR3_OFFSET3_CH_0 ((uint32_t)0x04000000) /*!< ADC OFFSET3_CH bit 0 */
+#define ADC_OFR3_OFFSET3_CH_1 ((uint32_t)0x08000000) /*!< ADC OFFSET3_CH bit 1 */
+#define ADC_OFR3_OFFSET3_CH_2 ((uint32_t)0x10000000) /*!< ADC OFFSET3_CH bit 2 */
+#define ADC_OFR3_OFFSET3_CH_3 ((uint32_t)0x20000000) /*!< ADC OFFSET3_CH bit 3 */
+#define ADC_OFR3_OFFSET3_CH_4 ((uint32_t)0x40000000) /*!< ADC OFFSET3_CH bit 4 */
+
+#define ADC_OFR3_OFFSET3_EN ((uint32_t)0x80000000) /*!< ADC offset 3 enable */
+
+/******************** Bit definition for ADC_OFR4 register ********************/
+#define ADC_OFR4_OFFSET4 ((uint32_t)0x00000FFF) /*!< ADC data offset 4 for channel programmed into bits OFFSET4_CH[4:0] */
+#define ADC_OFR4_OFFSET4_0 ((uint32_t)0x00000001) /*!< ADC OFFSET4 bit 0 */
+#define ADC_OFR4_OFFSET4_1 ((uint32_t)0x00000002) /*!< ADC OFFSET4 bit 1 */
+#define ADC_OFR4_OFFSET4_2 ((uint32_t)0x00000004) /*!< ADC OFFSET4 bit 2 */
+#define ADC_OFR4_OFFSET4_3 ((uint32_t)0x00000008) /*!< ADC OFFSET4 bit 3 */
+#define ADC_OFR4_OFFSET4_4 ((uint32_t)0x00000010) /*!< ADC OFFSET4 bit 4 */
+#define ADC_OFR4_OFFSET4_5 ((uint32_t)0x00000020) /*!< ADC OFFSET4 bit 5 */
+#define ADC_OFR4_OFFSET4_6 ((uint32_t)0x00000040) /*!< ADC OFFSET4 bit 6 */
+#define ADC_OFR4_OFFSET4_7 ((uint32_t)0x00000080) /*!< ADC OFFSET4 bit 7 */
+#define ADC_OFR4_OFFSET4_8 ((uint32_t)0x00000100) /*!< ADC OFFSET4 bit 8 */
+#define ADC_OFR4_OFFSET4_9 ((uint32_t)0x00000200) /*!< ADC OFFSET4 bit 9 */
+#define ADC_OFR4_OFFSET4_10 ((uint32_t)0x00000400) /*!< ADC OFFSET4 bit 10 */
+#define ADC_OFR4_OFFSET4_11 ((uint32_t)0x00000800) /*!< ADC OFFSET4 bit 11 */
+
+#define ADC_OFR4_OFFSET4_CH ((uint32_t)0x7C000000) /*!< ADC Channel selection for the data offset 4 */
+#define ADC_OFR4_OFFSET4_CH_0 ((uint32_t)0x04000000) /*!< ADC OFFSET4_CH bit 0 */
+#define ADC_OFR4_OFFSET4_CH_1 ((uint32_t)0x08000000) /*!< ADC OFFSET4_CH bit 1 */
+#define ADC_OFR4_OFFSET4_CH_2 ((uint32_t)0x10000000) /*!< ADC OFFSET4_CH bit 2 */
+#define ADC_OFR4_OFFSET4_CH_3 ((uint32_t)0x20000000) /*!< ADC OFFSET4_CH bit 3 */
+#define ADC_OFR4_OFFSET4_CH_4 ((uint32_t)0x40000000) /*!< ADC OFFSET4_CH bit 4 */
+
+#define ADC_OFR4_OFFSET4_EN ((uint32_t)0x80000000) /*!< ADC offset 4 enable */
+
+/******************** Bit definition for ADC_JDR1 register ********************/
+#define ADC_JDR1_JDATA ((uint32_t)0x0000FFFF) /*!< ADC Injected DATA */
+#define ADC_JDR1_JDATA_0 ((uint32_t)0x00000001) /*!< ADC JDATA bit 0 */
+#define ADC_JDR1_JDATA_1 ((uint32_t)0x00000002) /*!< ADC JDATA bit 1 */
+#define ADC_JDR1_JDATA_2 ((uint32_t)0x00000004) /*!< ADC JDATA bit 2 */
+#define ADC_JDR1_JDATA_3 ((uint32_t)0x00000008) /*!< ADC JDATA bit 3 */
+#define ADC_JDR1_JDATA_4 ((uint32_t)0x00000010) /*!< ADC JDATA bit 4 */
+#define ADC_JDR1_JDATA_5 ((uint32_t)0x00000020) /*!< ADC JDATA bit 5 */
+#define ADC_JDR1_JDATA_6 ((uint32_t)0x00000040) /*!< ADC JDATA bit 6 */
+#define ADC_JDR1_JDATA_7 ((uint32_t)0x00000080) /*!< ADC JDATA bit 7 */
+#define ADC_JDR1_JDATA_8 ((uint32_t)0x00000100) /*!< ADC JDATA bit 8 */
+#define ADC_JDR1_JDATA_9 ((uint32_t)0x00000200) /*!< ADC JDATA bit 9 */
+#define ADC_JDR1_JDATA_10 ((uint32_t)0x00000400) /*!< ADC JDATA bit 10 */
+#define ADC_JDR1_JDATA_11 ((uint32_t)0x00000800) /*!< ADC JDATA bit 11 */
+#define ADC_JDR1_JDATA_12 ((uint32_t)0x00001000) /*!< ADC JDATA bit 12 */
+#define ADC_JDR1_JDATA_13 ((uint32_t)0x00002000) /*!< ADC JDATA bit 13 */
+#define ADC_JDR1_JDATA_14 ((uint32_t)0x00004000) /*!< ADC JDATA bit 14 */
+#define ADC_JDR1_JDATA_15 ((uint32_t)0x00008000) /*!< ADC JDATA bit 15 */
+
+/******************** Bit definition for ADC_JDR2 register ********************/
+#define ADC_JDR2_JDATA ((uint32_t)0x0000FFFF) /*!< ADC Injected DATA */
+#define ADC_JDR2_JDATA_0 ((uint32_t)0x00000001) /*!< ADC JDATA bit 0 */
+#define ADC_JDR2_JDATA_1 ((uint32_t)0x00000002) /*!< ADC JDATA bit 1 */
+#define ADC_JDR2_JDATA_2 ((uint32_t)0x00000004) /*!< ADC JDATA bit 2 */
+#define ADC_JDR2_JDATA_3 ((uint32_t)0x00000008) /*!< ADC JDATA bit 3 */
+#define ADC_JDR2_JDATA_4 ((uint32_t)0x00000010) /*!< ADC JDATA bit 4 */
+#define ADC_JDR2_JDATA_5 ((uint32_t)0x00000020) /*!< ADC JDATA bit 5 */
+#define ADC_JDR2_JDATA_6 ((uint32_t)0x00000040) /*!< ADC JDATA bit 6 */
+#define ADC_JDR2_JDATA_7 ((uint32_t)0x00000080) /*!< ADC JDATA bit 7 */
+#define ADC_JDR2_JDATA_8 ((uint32_t)0x00000100) /*!< ADC JDATA bit 8 */
+#define ADC_JDR2_JDATA_9 ((uint32_t)0x00000200) /*!< ADC JDATA bit 9 */
+#define ADC_JDR2_JDATA_10 ((uint32_t)0x00000400) /*!< ADC JDATA bit 10 */
+#define ADC_JDR2_JDATA_11 ((uint32_t)0x00000800) /*!< ADC JDATA bit 11 */
+#define ADC_JDR2_JDATA_12 ((uint32_t)0x00001000) /*!< ADC JDATA bit 12 */
+#define ADC_JDR2_JDATA_13 ((uint32_t)0x00002000) /*!< ADC JDATA bit 13 */
+#define ADC_JDR2_JDATA_14 ((uint32_t)0x00004000) /*!< ADC JDATA bit 14 */
+#define ADC_JDR2_JDATA_15 ((uint32_t)0x00008000) /*!< ADC JDATA bit 15 */
+
+/******************** Bit definition for ADC_JDR3 register ********************/
+#define ADC_JDR3_JDATA ((uint32_t)0x0000FFFF) /*!< ADC Injected DATA */
+#define ADC_JDR3_JDATA_0 ((uint32_t)0x00000001) /*!< ADC JDATA bit 0 */
+#define ADC_JDR3_JDATA_1 ((uint32_t)0x00000002) /*!< ADC JDATA bit 1 */
+#define ADC_JDR3_JDATA_2 ((uint32_t)0x00000004) /*!< ADC JDATA bit 2 */
+#define ADC_JDR3_JDATA_3 ((uint32_t)0x00000008) /*!< ADC JDATA bit 3 */
+#define ADC_JDR3_JDATA_4 ((uint32_t)0x00000010) /*!< ADC JDATA bit 4 */
+#define ADC_JDR3_JDATA_5 ((uint32_t)0x00000020) /*!< ADC JDATA bit 5 */
+#define ADC_JDR3_JDATA_6 ((uint32_t)0x00000040) /*!< ADC JDATA bit 6 */
+#define ADC_JDR3_JDATA_7 ((uint32_t)0x00000080) /*!< ADC JDATA bit 7 */
+#define ADC_JDR3_JDATA_8 ((uint32_t)0x00000100) /*!< ADC JDATA bit 8 */
+#define ADC_JDR3_JDATA_9 ((uint32_t)0x00000200) /*!< ADC JDATA bit 9 */
+#define ADC_JDR3_JDATA_10 ((uint32_t)0x00000400) /*!< ADC JDATA bit 10 */
+#define ADC_JDR3_JDATA_11 ((uint32_t)0x00000800) /*!< ADC JDATA bit 11 */
+#define ADC_JDR3_JDATA_12 ((uint32_t)0x00001000) /*!< ADC JDATA bit 12 */
+#define ADC_JDR3_JDATA_13 ((uint32_t)0x00002000) /*!< ADC JDATA bit 13 */
+#define ADC_JDR3_JDATA_14 ((uint32_t)0x00004000) /*!< ADC JDATA bit 14 */
+#define ADC_JDR3_JDATA_15 ((uint32_t)0x00008000) /*!< ADC JDATA bit 15 */
+
+/******************** Bit definition for ADC_JDR4 register ********************/
+#define ADC_JDR4_JDATA ((uint32_t)0x0000FFFF) /*!< ADC Injected DATA */
+#define ADC_JDR4_JDATA_0 ((uint32_t)0x00000001) /*!< ADC JDATA bit 0 */
+#define ADC_JDR4_JDATA_1 ((uint32_t)0x00000002) /*!< ADC JDATA bit 1 */
+#define ADC_JDR4_JDATA_2 ((uint32_t)0x00000004) /*!< ADC JDATA bit 2 */
+#define ADC_JDR4_JDATA_3 ((uint32_t)0x00000008) /*!< ADC JDATA bit 3 */
+#define ADC_JDR4_JDATA_4 ((uint32_t)0x00000010) /*!< ADC JDATA bit 4 */
+#define ADC_JDR4_JDATA_5 ((uint32_t)0x00000020) /*!< ADC JDATA bit 5 */
+#define ADC_JDR4_JDATA_6 ((uint32_t)0x00000040) /*!< ADC JDATA bit 6 */
+#define ADC_JDR4_JDATA_7 ((uint32_t)0x00000080) /*!< ADC JDATA bit 7 */
+#define ADC_JDR4_JDATA_8 ((uint32_t)0x00000100) /*!< ADC JDATA bit 8 */
+#define ADC_JDR4_JDATA_9 ((uint32_t)0x00000200) /*!< ADC JDATA bit 9 */
+#define ADC_JDR4_JDATA_10 ((uint32_t)0x00000400) /*!< ADC JDATA bit 10 */
+#define ADC_JDR4_JDATA_11 ((uint32_t)0x00000800) /*!< ADC JDATA bit 11 */
+#define ADC_JDR4_JDATA_12 ((uint32_t)0x00001000) /*!< ADC JDATA bit 12 */
+#define ADC_JDR4_JDATA_13 ((uint32_t)0x00002000) /*!< ADC JDATA bit 13 */
+#define ADC_JDR4_JDATA_14 ((uint32_t)0x00004000) /*!< ADC JDATA bit 14 */
+#define ADC_JDR4_JDATA_15 ((uint32_t)0x00008000) /*!< ADC JDATA bit 15 */
+
+/******************** Bit definition for ADC_AWD2CR register ********************/
+#define ADC_AWD2CR_AWD2CH ((uint32_t)0x0007FFFE) /*!< ADC Analog watchdog 2 channel selection */
+#define ADC_AWD2CR_AWD2CH_0 ((uint32_t)0x00000002) /*!< ADC AWD2CH bit 0 */
+#define ADC_AWD2CR_AWD2CH_1 ((uint32_t)0x00000004) /*!< ADC AWD2CH bit 1 */
+#define ADC_AWD2CR_AWD2CH_2 ((uint32_t)0x00000008) /*!< ADC AWD2CH bit 2 */
+#define ADC_AWD2CR_AWD2CH_3 ((uint32_t)0x00000010) /*!< ADC AWD2CH bit 3 */
+#define ADC_AWD2CR_AWD2CH_4 ((uint32_t)0x00000020) /*!< ADC AWD2CH bit 4 */
+#define ADC_AWD2CR_AWD2CH_5 ((uint32_t)0x00000040) /*!< ADC AWD2CH bit 5 */
+#define ADC_AWD2CR_AWD2CH_6 ((uint32_t)0x00000080) /*!< ADC AWD2CH bit 6 */
+#define ADC_AWD2CR_AWD2CH_7 ((uint32_t)0x00000100) /*!< ADC AWD2CH bit 7 */
+#define ADC_AWD2CR_AWD2CH_8 ((uint32_t)0x00000200) /*!< ADC AWD2CH bit 8 */
+#define ADC_AWD2CR_AWD2CH_9 ((uint32_t)0x00000400) /*!< ADC AWD2CH bit 9 */
+#define ADC_AWD2CR_AWD2CH_10 ((uint32_t)0x00000800) /*!< ADC AWD2CH bit 10 */
+#define ADC_AWD2CR_AWD2CH_11 ((uint32_t)0x00001000) /*!< ADC AWD2CH bit 11 */
+#define ADC_AWD2CR_AWD2CH_12 ((uint32_t)0x00002000) /*!< ADC AWD2CH bit 12 */
+#define ADC_AWD2CR_AWD2CH_13 ((uint32_t)0x00004000) /*!< ADC AWD2CH bit 13 */
+#define ADC_AWD2CR_AWD2CH_14 ((uint32_t)0x00008000) /*!< ADC AWD2CH bit 14 */
+#define ADC_AWD2CR_AWD2CH_15 ((uint32_t)0x00010000) /*!< ADC AWD2CH bit 15 */
+#define ADC_AWD2CR_AWD2CH_16 ((uint32_t)0x00020000) /*!< ADC AWD2CH bit 16 */
+#define ADC_AWD2CR_AWD2CH_17 ((uint32_t)0x00030000) /*!< ADC AWD2CH bit 17 */
+
+/******************** Bit definition for ADC_AWD3CR register ********************/
+#define ADC_AWD3CR_AWD3CH ((uint32_t)0x0007FFFE) /*!< ADC Analog watchdog 2 channel selection */
+#define ADC_AWD3CR_AWD3CH_0 ((uint32_t)0x00000002) /*!< ADC AWD3CH bit 0 */
+#define ADC_AWD3CR_AWD3CH_1 ((uint32_t)0x00000004) /*!< ADC AWD3CH bit 1 */
+#define ADC_AWD3CR_AWD3CH_2 ((uint32_t)0x00000008) /*!< ADC AWD3CH bit 2 */
+#define ADC_AWD3CR_AWD3CH_3 ((uint32_t)0x00000010) /*!< ADC AWD3CH bit 3 */
+#define ADC_AWD3CR_AWD3CH_4 ((uint32_t)0x00000020) /*!< ADC AWD3CH bit 4 */
+#define ADC_AWD3CR_AWD3CH_5 ((uint32_t)0x00000040) /*!< ADC AWD3CH bit 5 */
+#define ADC_AWD3CR_AWD3CH_6 ((uint32_t)0x00000080) /*!< ADC AWD3CH bit 6 */
+#define ADC_AWD3CR_AWD3CH_7 ((uint32_t)0x00000100) /*!< ADC AWD3CH bit 7 */
+#define ADC_AWD3CR_AWD3CH_8 ((uint32_t)0x00000200) /*!< ADC AWD3CH bit 8 */
+#define ADC_AWD3CR_AWD3CH_9 ((uint32_t)0x00000400) /*!< ADC AWD3CH bit 9 */
+#define ADC_AWD3CR_AWD3CH_10 ((uint32_t)0x00000800) /*!< ADC AWD3CH bit 10 */
+#define ADC_AWD3CR_AWD3CH_11 ((uint32_t)0x00001000) /*!< ADC AWD3CH bit 11 */
+#define ADC_AWD3CR_AWD3CH_12 ((uint32_t)0x00002000) /*!< ADC AWD3CH bit 12 */
+#define ADC_AWD3CR_AWD3CH_13 ((uint32_t)0x00004000) /*!< ADC AWD3CH bit 13 */
+#define ADC_AWD3CR_AWD3CH_14 ((uint32_t)0x00008000) /*!< ADC AWD3CH bit 14 */
+#define ADC_AWD3CR_AWD3CH_15 ((uint32_t)0x00010000) /*!< ADC AWD3CH bit 15 */
+#define ADC_AWD3CR_AWD3CH_16 ((uint32_t)0x00020000) /*!< ADC AWD3CH bit 16 */
+#define ADC_AWD3CR_AWD3CH_17 ((uint32_t)0x00030000) /*!< ADC AWD3CH bit 17 */
+
+/******************** Bit definition for ADC_DIFSEL register ********************/
+#define ADC_DIFSEL_DIFSEL ((uint32_t)0x0007FFFE) /*!< ADC differential modes for channels 1 to 18 */
+#define ADC_DIFSEL_DIFSEL_0 ((uint32_t)0x00000002) /*!< ADC DIFSEL bit 0 */
+#define ADC_DIFSEL_DIFSEL_1 ((uint32_t)0x00000004) /*!< ADC DIFSEL bit 1 */
+#define ADC_DIFSEL_DIFSEL_2 ((uint32_t)0x00000008) /*!< ADC DIFSEL bit 2 */
+#define ADC_DIFSEL_DIFSEL_3 ((uint32_t)0x00000010) /*!< ADC DIFSEL bit 3 */
+#define ADC_DIFSEL_DIFSEL_4 ((uint32_t)0x00000020) /*!< ADC DIFSEL bit 4 */
+#define ADC_DIFSEL_DIFSEL_5 ((uint32_t)0x00000040) /*!< ADC DIFSEL bit 5 */
+#define ADC_DIFSEL_DIFSEL_6 ((uint32_t)0x00000080) /*!< ADC DIFSEL bit 6 */
+#define ADC_DIFSEL_DIFSEL_7 ((uint32_t)0x00000100) /*!< ADC DIFSEL bit 7 */
+#define ADC_DIFSEL_DIFSEL_8 ((uint32_t)0x00000200) /*!< ADC DIFSEL bit 8 */
+#define ADC_DIFSEL_DIFSEL_9 ((uint32_t)0x00000400) /*!< ADC DIFSEL bit 9 */
+#define ADC_DIFSEL_DIFSEL_10 ((uint32_t)0x00000800) /*!< ADC DIFSEL bit 10 */
+#define ADC_DIFSEL_DIFSEL_11 ((uint32_t)0x00001000) /*!< ADC DIFSEL bit 11 */
+#define ADC_DIFSEL_DIFSEL_12 ((uint32_t)0x00002000) /*!< ADC DIFSEL bit 12 */
+#define ADC_DIFSEL_DIFSEL_13 ((uint32_t)0x00004000) /*!< ADC DIFSEL bit 13 */
+#define ADC_DIFSEL_DIFSEL_14 ((uint32_t)0x00008000) /*!< ADC DIFSEL bit 14 */
+#define ADC_DIFSEL_DIFSEL_15 ((uint32_t)0x00010000) /*!< ADC DIFSEL bit 15 */
+#define ADC_DIFSEL_DIFSEL_16 ((uint32_t)0x00020000) /*!< ADC DIFSEL bit 16 */
+#define ADC_DIFSEL_DIFSEL_17 ((uint32_t)0x00030000) /*!< ADC DIFSEL bit 17 */
+
+/******************** Bit definition for ADC_CALFACT register ********************/
+#define ADC_CALFACT_CALFACT_S ((uint32_t)0x0000007F) /*!< ADC calibration factors in single-ended mode */
+#define ADC_CALFACT_CALFACT_S_0 ((uint32_t)0x00000001) /*!< ADC CALFACT_S bit 0 */
+#define ADC_CALFACT_CALFACT_S_1 ((uint32_t)0x00000002) /*!< ADC CALFACT_S bit 1 */
+#define ADC_CALFACT_CALFACT_S_2 ((uint32_t)0x00000004) /*!< ADC CALFACT_S bit 2 */
+#define ADC_CALFACT_CALFACT_S_3 ((uint32_t)0x00000008) /*!< ADC CALFACT_S bit 3 */
+#define ADC_CALFACT_CALFACT_S_4 ((uint32_t)0x00000010) /*!< ADC CALFACT_S bit 4 */
+#define ADC_CALFACT_CALFACT_S_5 ((uint32_t)0x00000020) /*!< ADC CALFACT_S bit 5 */
+#define ADC_CALFACT_CALFACT_S_6 ((uint32_t)0x00000040) /*!< ADC CALFACT_S bit 6 */
+#define ADC_CALFACT_CALFACT_D ((uint32_t)0x007F0000) /*!< ADC calibration factors in differential mode */
+#define ADC_CALFACT_CALFACT_D_0 ((uint32_t)0x00010000) /*!< ADC CALFACT_D bit 0 */
+#define ADC_CALFACT_CALFACT_D_1 ((uint32_t)0x00020000) /*!< ADC CALFACT_D bit 1 */
+#define ADC_CALFACT_CALFACT_D_2 ((uint32_t)0x00040000) /*!< ADC CALFACT_D bit 2 */
+#define ADC_CALFACT_CALFACT_D_3 ((uint32_t)0x00080000) /*!< ADC CALFACT_D bit 3 */
+#define ADC_CALFACT_CALFACT_D_4 ((uint32_t)0x00100000) /*!< ADC CALFACT_D bit 4 */
+#define ADC_CALFACT_CALFACT_D_5 ((uint32_t)0x00200000) /*!< ADC CALFACT_D bit 5 */
+#define ADC_CALFACT_CALFACT_D_6 ((uint32_t)0x00400000) /*!< ADC CALFACT_D bit 6 */
+
+/************************* ADC Common registers *****************************/
+/******************** Bit definition for ADC12_CSR register ********************/
+#define ADC12_CSR_ADRDY_MST ((uint32_t)0x00000001) /*!< Master ADC ready */
+#define ADC12_CSR_ADRDY_EOSMP_MST ((uint32_t)0x00000002) /*!< End of sampling phase flag of the master ADC */
+#define ADC12_CSR_ADRDY_EOC_MST ((uint32_t)0x00000004) /*!< End of regular conversion of the master ADC */
+#define ADC12_CSR_ADRDY_EOS_MST ((uint32_t)0x00000008) /*!< End of regular sequence flag of the master ADC */
+#define ADC12_CSR_ADRDY_OVR_MST ((uint32_t)0x00000010) /*!< Overrun flag of the master ADC */
+#define ADC12_CSR_ADRDY_JEOC_MST ((uint32_t)0x00000020) /*!< End of injected conversion of the master ADC */
+#define ADC12_CSR_ADRDY_JEOS_MST ((uint32_t)0x00000040) /*!< End of injected sequence flag of the master ADC */
+#define ADC12_CSR_AWD1_MST ((uint32_t)0x00000080) /*!< Analog watchdog 1 flag of the master ADC */
+#define ADC12_CSR_AWD2_MST ((uint32_t)0x00000100) /*!< Analog watchdog 2 flag of the master ADC */
+#define ADC12_CSR_AWD3_MST ((uint32_t)0x00000200) /*!< Analog watchdog 3 flag of the master ADC */
+#define ADC12_CSR_JQOVF_MST ((uint32_t)0x00000400) /*!< Injected context queue overflow flag of the master ADC */
+#define ADC12_CSR_ADRDY_SLV ((uint32_t)0x00010000) /*!< Slave ADC ready */
+#define ADC12_CSR_ADRDY_EOSMP_SLV ((uint32_t)0x00020000) /*!< End of sampling phase flag of the slave ADC */
+#define ADC12_CSR_ADRDY_EOC_SLV ((uint32_t)0x00040000) /*!< End of regular conversion of the slave ADC */
+#define ADC12_CSR_ADRDY_EOS_SLV ((uint32_t)0x00080000) /*!< End of regular sequence flag of the slave ADC */
+#define ADC12_CSR_ADRDY_OVR_SLV ((uint32_t)0x00100000) /*!< Overrun flag of the slave ADC */
+#define ADC12_CSR_ADRDY_JEOC_SLV ((uint32_t)0x00200000) /*!< End of injected conversion of the slave ADC */
+#define ADC12_CSR_ADRDY_JEOS_SLV ((uint32_t)0x00400000) /*!< End of injected sequence flag of the slave ADC */
+#define ADC12_CSR_AWD1_SLV ((uint32_t)0x00800000) /*!< Analog watchdog 1 flag of the slave ADC */
+#define ADC12_CSR_AWD2_SLV ((uint32_t)0x01000000) /*!< Analog watchdog 2 flag of the slave ADC */
+#define ADC12_CSR_AWD3_SLV ((uint32_t)0x02000000) /*!< Analog watchdog 3 flag of the slave ADC */
+#define ADC12_CSR_JQOVF_SLV ((uint32_t)0x04000000) /*!< Injected context queue overflow flag of the slave ADC */
+
+/******************** Bit definition for ADC34_CSR register ********************/
+#define ADC34_CSR_ADRDY_MST ((uint32_t)0x00000001) /*!< Master ADC ready */
+#define ADC34_CSR_ADRDY_EOSMP_MST ((uint32_t)0x00000002) /*!< End of sampling phase flag of the master ADC */
+#define ADC34_CSR_ADRDY_EOC_MST ((uint32_t)0x00000004) /*!< End of regular conversion of the master ADC */
+#define ADC34_CSR_ADRDY_EOS_MST ((uint32_t)0x00000008) /*!< End of regular sequence flag of the master ADC */
+#define ADC34_CSR_ADRDY_OVR_MST ((uint32_t)0x00000010) /*!< Overrun flag of the master ADC */
+#define ADC34_CSR_ADRDY_JEOC_MST ((uint32_t)0x00000020) /*!< End of injected conversion of the master ADC */
+#define ADC34_CSR_ADRDY_JEOS_MST ((uint32_t)0x00000040) /*!< End of injected sequence flag of the master ADC */
+#define ADC34_CSR_AWD1_MST ((uint32_t)0x00000080) /*!< Analog watchdog 1 flag of the master ADC */
+#define ADC34_CSR_AWD2_MST ((uint32_t)0x00000100) /*!< Analog watchdog 2 flag of the master ADC */
+#define ADC34_CSR_AWD3_MST ((uint32_t)0x00000200) /*!< Analog watchdog 3 flag of the master ADC */
+#define ADC34_CSR_JQOVF_MST ((uint32_t)0x00000400) /*!< Injected context queue overflow flag of the master ADC */
+#define ADC34_CSR_ADRDY_SLV ((uint32_t)0x00010000) /*!< Slave ADC ready */
+#define ADC34_CSR_ADRDY_EOSMP_SLV ((uint32_t)0x00020000) /*!< End of sampling phase flag of the slave ADC */
+#define ADC34_CSR_ADRDY_EOC_SLV ((uint32_t)0x00040000) /*!< End of regular conversion of the slave ADC */
+#define ADC34_CSR_ADRDY_EOS_SLV ((uint32_t)0x00080000) /*!< End of regular sequence flag of the slave ADC */
+#define ADC12_CSR_ADRDY_OVR_SLV ((uint32_t)0x00100000) /*!< Overrun flag of the slave ADC */
+#define ADC34_CSR_ADRDY_JEOC_SLV ((uint32_t)0x00200000) /*!< End of injected conversion of the slave ADC */
+#define ADC34_CSR_ADRDY_JEOS_SLV ((uint32_t)0x00400000) /*!< End of injected sequence flag of the slave ADC */
+#define ADC34_CSR_AWD1_SLV ((uint32_t)0x00800000) /*!< Analog watchdog 1 flag of the slave ADC */
+#define ADC34_CSR_AWD2_SLV ((uint32_t)0x01000000) /*!< Analog watchdog 2 flag of the slave ADC */
+#define ADC34_CSR_AWD3_SLV ((uint32_t)0x02000000) /*!< Analog watchdog 3 flag of the slave ADC */
+#define ADC34_CSR_JQOVF_SLV ((uint32_t)0x04000000) /*!< Injected context queue overflow flag of the slave ADC */
+
+/******************** Bit definition for ADC_CCR register ********************/
+#define ADC12_CCR_MULTI ((uint32_t)0x0000001F) /*!< Multi ADC mode selection */
+#define ADC12_CCR_MULTI_0 ((uint32_t)0x00000001) /*!< MULTI bit 0 */
+#define ADC12_CCR_MULTI_1 ((uint32_t)0x00000002) /*!< MULTI bit 1 */
+#define ADC12_CCR_MULTI_2 ((uint32_t)0x00000004) /*!< MULTI bit 2 */
+#define ADC12_CCR_MULTI_3 ((uint32_t)0x00000008) /*!< MULTI bit 3 */
+#define ADC12_CCR_MULTI_4 ((uint32_t)0x00000010) /*!< MULTI bit 4 */
+#define ADC12_CCR_DELAY ((uint32_t)0x00000F00) /*!< Delay between 2 sampling phases */
+#define ADC12_CCR_DELAY_0 ((uint32_t)0x00000100) /*!< DELAY bit 0 */
+#define ADC12_CCR_DELAY_1 ((uint32_t)0x00000200) /*!< DELAY bit 1 */
+#define ADC12_CCR_DELAY_2 ((uint32_t)0x00000400) /*!< DELAY bit 2 */
+#define ADC12_CCR_DELAY_3 ((uint32_t)0x00000800) /*!< DELAY bit 3 */
+#define ADC12_CCR_DMACFG ((uint32_t)0x00002000) /*!< DMA configuration for multi-ADC mode */
+#define ADC12_CCR_MDMA ((uint32_t)0x0000C000) /*!< DMA mode for multi-ADC mode */
+#define ADC12_CCR_MDMA_0 ((uint32_t)0x00004000) /*!< MDMA bit 0 */
+#define ADC12_CCR_MDMA_1 ((uint32_t)0x00008000) /*!< MDMA bit 1 */
+#define ADC12_CCR_CKMODE ((uint32_t)0x00030000) /*!< ADC clock mode */
+#define ADC12_CCR_CKMODE_0 ((uint32_t)0x00010000) /*!< CKMODE bit 0 */
+#define ADC12_CCR_CKMODE_1 ((uint32_t)0x00020000) /*!< CKMODE bit 1 */
+#define ADC12_CCR_VREFEN ((uint32_t)0x00400000) /*!< VREFINT enable */
+#define ADC12_CCR_TSEN ((uint32_t)0x00800000) /*!< Temperature sensor enable */
+#define ADC12_CCR_VBATEN ((uint32_t)0x01000000) /*!< VBAT enable */
+
+/******************** Bit definition for ADC_CCR register ********************/
+#define ADC34_CCR_MULTI ((uint32_t)0x0000001F) /*!< Multi ADC mode selection */
+#define ADC34_CCR_MULTI_0 ((uint32_t)0x00000001) /*!< MULTI bit 0 */
+#define ADC34_CCR_MULTI_1 ((uint32_t)0x00000002) /*!< MULTI bit 1 */
+#define ADC34_CCR_MULTI_2 ((uint32_t)0x00000004) /*!< MULTI bit 2 */
+#define ADC34_CCR_MULTI_3 ((uint32_t)0x00000008) /*!< MULTI bit 3 */
+#define ADC34_CCR_MULTI_4 ((uint32_t)0x00000010) /*!< MULTI bit 4 */
+
+#define ADC34_CCR_DELAY ((uint32_t)0x00000F00) /*!< Delay between 2 sampling phases */
+#define ADC34_CCR_DELAY_0 ((uint32_t)0x00000100) /*!< DELAY bit 0 */
+#define ADC34_CCR_DELAY_1 ((uint32_t)0x00000200) /*!< DELAY bit 1 */
+#define ADC34_CCR_DELAY_2 ((uint32_t)0x00000400) /*!< DELAY bit 2 */
+#define ADC34_CCR_DELAY_3 ((uint32_t)0x00000800) /*!< DELAY bit 3 */
+
+#define ADC34_CCR_DMACFG ((uint32_t)0x00002000) /*!< DMA configuration for multi-ADC mode */
+#define ADC34_CCR_MDMA ((uint32_t)0x0000C000) /*!< DMA mode for multi-ADC mode */
+#define ADC34_CCR_MDMA_0 ((uint32_t)0x00004000) /*!< MDMA bit 0 */
+#define ADC34_CCR_MDMA_1 ((uint32_t)0x00008000) /*!< MDMA bit 1 */
+
+#define ADC34_CCR_CKMODE ((uint32_t)0x00030000) /*!< ADC clock mode */
+#define ADC34_CCR_CKMODE_0 ((uint32_t)0x00010000) /*!< CKMODE bit 0 */
+#define ADC34_CCR_CKMODE_1 ((uint32_t)0x00020000) /*!< CKMODE bit 1 */
+
+#define ADC34_CCR_VREFEN ((uint32_t)0x00400000) /*!< VREFINT enable */
+#define ADC34_CCR_TSEN ((uint32_t)0x00800000) /*!< Temperature sensor enable */
+#define ADC34_CCR_VBATEN ((uint32_t)0x01000000) /*!< VBAT enable */
+
+/******************** Bit definition for ADC_CDR register ********************/
+#define ADC12_CDR_RDATA_MST ((uint32_t)0x0000FFFF) /*!< Regular Data of the master ADC */
+#define ADC12_CDR_RDATA_MST_0 ((uint32_t)0x00000001) /*!< RDATA_MST bit 0 */
+#define ADC12_CDR_RDATA_MST_1 ((uint32_t)0x00000002) /*!< RDATA_MST bit 1 */
+#define ADC12_CDR_RDATA_MST_2 ((uint32_t)0x00000004) /*!< RDATA_MST bit 2 */
+#define ADC12_CDR_RDATA_MST_3 ((uint32_t)0x00000008) /*!< RDATA_MST bit 3 */
+#define ADC12_CDR_RDATA_MST_4 ((uint32_t)0x00000010) /*!< RDATA_MST bit 4 */
+#define ADC12_CDR_RDATA_MST_5 ((uint32_t)0x00000020) /*!< RDATA_MST bit 5 */
+#define ADC12_CDR_RDATA_MST_6 ((uint32_t)0x00000040) /*!< RDATA_MST bit 6 */
+#define ADC12_CDR_RDATA_MST_7 ((uint32_t)0x00000080) /*!< RDATA_MST bit 7 */
+#define ADC12_CDR_RDATA_MST_8 ((uint32_t)0x00000100) /*!< RDATA_MST bit 8 */
+#define ADC12_CDR_RDATA_MST_9 ((uint32_t)0x00000200) /*!< RDATA_MST bit 9 */
+#define ADC12_CDR_RDATA_MST_10 ((uint32_t)0x00000400) /*!< RDATA_MST bit 10 */
+#define ADC12_CDR_RDATA_MST_11 ((uint32_t)0x00000800) /*!< RDATA_MST bit 11 */
+#define ADC12_CDR_RDATA_MST_12 ((uint32_t)0x00001000) /*!< RDATA_MST bit 12 */
+#define ADC12_CDR_RDATA_MST_13 ((uint32_t)0x00002000) /*!< RDATA_MST bit 13 */
+#define ADC12_CDR_RDATA_MST_14 ((uint32_t)0x00004000) /*!< RDATA_MST bit 14 */
+#define ADC12_CDR_RDATA_MST_15 ((uint32_t)0x00008000) /*!< RDATA_MST bit 15 */
+
+#define ADC12_CDR_RDATA_SLV ((uint32_t)0xFFFF0000) /*!< Regular Data of the master ADC */
+#define ADC12_CDR_RDATA_SLV_0 ((uint32_t)0x00010000) /*!< RDATA_SLV bit 0 */
+#define ADC12_CDR_RDATA_SLV_1 ((uint32_t)0x00020000) /*!< RDATA_SLV bit 1 */
+#define ADC12_CDR_RDATA_SLV_2 ((uint32_t)0x00040000) /*!< RDATA_SLV bit 2 */
+#define ADC12_CDR_RDATA_SLV_3 ((uint32_t)0x00080000) /*!< RDATA_SLV bit 3 */
+#define ADC12_CDR_RDATA_SLV_4 ((uint32_t)0x00100000) /*!< RDATA_SLV bit 4 */
+#define ADC12_CDR_RDATA_SLV_5 ((uint32_t)0x00200000) /*!< RDATA_SLV bit 5 */
+#define ADC12_CDR_RDATA_SLV_6 ((uint32_t)0x00400000) /*!< RDATA_SLV bit 6 */
+#define ADC12_CDR_RDATA_SLV_7 ((uint32_t)0x00800000) /*!< RDATA_SLV bit 7 */
+#define ADC12_CDR_RDATA_SLV_8 ((uint32_t)0x01000000) /*!< RDATA_SLV bit 8 */
+#define ADC12_CDR_RDATA_SLV_9 ((uint32_t)0x02000000) /*!< RDATA_SLV bit 9 */
+#define ADC12_CDR_RDATA_SLV_10 ((uint32_t)0x04000000) /*!< RDATA_SLV bit 10 */
+#define ADC12_CDR_RDATA_SLV_11 ((uint32_t)0x08000000) /*!< RDATA_SLV bit 11 */
+#define ADC12_CDR_RDATA_SLV_12 ((uint32_t)0x10000000) /*!< RDATA_SLV bit 12 */
+#define ADC12_CDR_RDATA_SLV_13 ((uint32_t)0x20000000) /*!< RDATA_SLV bit 13 */
+#define ADC12_CDR_RDATA_SLV_14 ((uint32_t)0x40000000) /*!< RDATA_SLV bit 14 */
+#define ADC12_CDR_RDATA_SLV_15 ((uint32_t)0x80000000) /*!< RDATA_SLV bit 15 */
+
+/******************** Bit definition for ADC_CDR register ********************/
+#define ADC34_CDR_RDATA_MST ((uint32_t)0x0000FFFF) /*!< Regular Data of the master ADC */
+#define ADC34_CDR_RDATA_MST_0 ((uint32_t)0x00000001) /*!< RDATA_MST bit 0 */
+#define ADC34_CDR_RDATA_MST_1 ((uint32_t)0x00000002) /*!< RDATA_MST bit 1 */
+#define ADC34_CDR_RDATA_MST_2 ((uint32_t)0x00000004) /*!< RDATA_MST bit 2 */
+#define ADC34_CDR_RDATA_MST_3 ((uint32_t)0x00000008) /*!< RDATA_MST bit 3 */
+#define ADC34_CDR_RDATA_MST_4 ((uint32_t)0x00000010) /*!< RDATA_MST bit 4 */
+#define ADC34_CDR_RDATA_MST_5 ((uint32_t)0x00000020) /*!< RDATA_MST bit 5 */
+#define ADC34_CDR_RDATA_MST_6 ((uint32_t)0x00000040) /*!< RDATA_MST bit 6 */
+#define ADC34_CDR_RDATA_MST_7 ((uint32_t)0x00000080) /*!< RDATA_MST bit 7 */
+#define ADC34_CDR_RDATA_MST_8 ((uint32_t)0x00000100) /*!< RDATA_MST bit 8 */
+#define ADC34_CDR_RDATA_MST_9 ((uint32_t)0x00000200) /*!< RDATA_MST bit 9 */
+#define ADC34_CDR_RDATA_MST_10 ((uint32_t)0x00000400) /*!< RDATA_MST bit 10 */
+#define ADC34_CDR_RDATA_MST_11 ((uint32_t)0x00000800) /*!< RDATA_MST bit 11 */
+#define ADC34_CDR_RDATA_MST_12 ((uint32_t)0x00001000) /*!< RDATA_MST bit 12 */
+#define ADC34_CDR_RDATA_MST_13 ((uint32_t)0x00002000) /*!< RDATA_MST bit 13 */
+#define ADC34_CDR_RDATA_MST_14 ((uint32_t)0x00004000) /*!< RDATA_MST bit 14 */
+#define ADC34_CDR_RDATA_MST_15 ((uint32_t)0x00008000) /*!< RDATA_MST bit 15 */
+
+#define ADC34_CDR_RDATA_SLV ((uint32_t)0xFFFF0000) /*!< Regular Data of the master ADC */
+#define ADC34_CDR_RDATA_SLV_0 ((uint32_t)0x00010000) /*!< RDATA_SLV bit 0 */
+#define ADC34_CDR_RDATA_SLV_1 ((uint32_t)0x00020000) /*!< RDATA_SLV bit 1 */
+#define ADC34_CDR_RDATA_SLV_2 ((uint32_t)0x00040000) /*!< RDATA_SLV bit 2 */
+#define ADC34_CDR_RDATA_SLV_3 ((uint32_t)0x00080000) /*!< RDATA_SLV bit 3 */
+#define ADC34_CDR_RDATA_SLV_4 ((uint32_t)0x00100000) /*!< RDATA_SLV bit 4 */
+#define ADC34_CDR_RDATA_SLV_5 ((uint32_t)0x00200000) /*!< RDATA_SLV bit 5 */
+#define ADC34_CDR_RDATA_SLV_6 ((uint32_t)0x00400000) /*!< RDATA_SLV bit 6 */
+#define ADC34_CDR_RDATA_SLV_7 ((uint32_t)0x00800000) /*!< RDATA_SLV bit 7 */
+#define ADC34_CDR_RDATA_SLV_8 ((uint32_t)0x01000000) /*!< RDATA_SLV bit 8 */
+#define ADC34_CDR_RDATA_SLV_9 ((uint32_t)0x02000000) /*!< RDATA_SLV bit 9 */
+#define ADC34_CDR_RDATA_SLV_10 ((uint32_t)0x04000000) /*!< RDATA_SLV bit 10 */
+#define ADC34_CDR_RDATA_SLV_11 ((uint32_t)0x08000000) /*!< RDATA_SLV bit 11 */
+#define ADC34_CDR_RDATA_SLV_12 ((uint32_t)0x10000000) /*!< RDATA_SLV bit 12 */
+#define ADC34_CDR_RDATA_SLV_13 ((uint32_t)0x20000000) /*!< RDATA_SLV bit 13 */
+#define ADC34_CDR_RDATA_SLV_14 ((uint32_t)0x40000000) /*!< RDATA_SLV bit 14 */
+#define ADC34_CDR_RDATA_SLV_15 ((uint32_t)0x80000000) /*!< RDATA_SLV bit 15 */
+
+/******************************************************************************/
+/* */
+/* Analog Comparators (COMP) */
+/* */
+/******************************************************************************/
+/********************** Bit definition for COMP1_CSR register ***************/
+#define COMP1_CSR_COMP1EN ((uint32_t)0x00000001) /*!< COMP1 enable */
+#define COMP1_CSR_COMP1SW1 ((uint32_t)0x00000002) /*!< COMP1 SW1 switch control */
+#define COMP1_CSR_COMP1INSEL ((uint32_t)0x00000070) /*!< COMP1 inverting input select */
+#define COMP1_CSR_COMP1INSEL_0 ((uint32_t)0x00000010) /*!< COMP1 inverting input select bit 0 */
+#define COMP1_CSR_COMP1INSEL_1 ((uint32_t)0x00000020) /*!< COMP1 inverting input select bit 1 */
+#define COMP1_CSR_COMP1INSEL_2 ((uint32_t)0x00000040) /*!< COMP1 inverting input select bit 2 */
+#define COMP1_CSR_COMP1OUTSEL ((uint32_t)0x00003C00) /*!< COMP1 output select */
+#define COMP1_CSR_COMP1OUTSEL_0 ((uint32_t)0x00000400) /*!< COMP1 output select bit 0 */
+#define COMP1_CSR_COMP1OUTSEL_1 ((uint32_t)0x00000800) /*!< COMP1 output select bit 1 */
+#define COMP1_CSR_COMP1OUTSEL_2 ((uint32_t)0x00001000) /*!< COMP1 output select bit 2 */
+#define COMP1_CSR_COMP1OUTSEL_3 ((uint32_t)0x00002000) /*!< COMP1 output select bit 3 */
+#define COMP1_CSR_COMP1POL ((uint32_t)0x00008000) /*!< COMP1 output polarity */
+#define COMP1_CSR_COMP1BLANKING ((uint32_t)0x000C0000) /*!< COMP1 blanking */
+#define COMP1_CSR_COMP1BLANKING_0 ((uint32_t)0x00040000) /*!< COMP1 blanking bit 0 */
+#define COMP1_CSR_COMP1BLANKING_1 ((uint32_t)0x00080000) /*!< COMP1 blanking bit 1 */
+#define COMP1_CSR_COMP1BLANKING_2 ((uint32_t)0x00100000) /*!< COMP1 blanking bit 2 */
+#define COMP1_CSR_COMP1OUT ((uint32_t)0x40000000) /*!< COMP1 output level */
+#define COMP1_CSR_COMP1LOCK ((uint32_t)0x80000000) /*!< COMP1 lock */
+
+/********************** Bit definition for COMP2_CSR register ***************/
+#define COMP2_CSR_COMP2EN ((uint32_t)0x00000001) /*!< COMP2 enable */
+#define COMP2_CSR_COMP2INSEL ((uint32_t)0x00400070) /*!< COMP2 inverting input select */
+#define COMP2_CSR_COMP2INSEL_0 ((uint32_t)0x00000010) /*!< COMP2 inverting input select bit 0 */
+#define COMP2_CSR_COMP2INSEL_1 ((uint32_t)0x00000020) /*!< COMP2 inverting input select bit 1 */
+#define COMP2_CSR_COMP2INSEL_2 ((uint32_t)0x00000040) /*!< COMP2 inverting input select bit 2 */
+#define COMP2_CSR_COMP2INSEL_3 ((uint32_t)0x00400000) /*!< COMP2 inverting input select bit 3 */
+#define COMP2_CSR_COMP2OUTSEL ((uint32_t)0x00003C00) /*!< COMP2 output select */
+#define COMP2_CSR_COMP2OUTSEL_0 ((uint32_t)0x00000400) /*!< COMP2 output select bit 0 */
+#define COMP2_CSR_COMP2OUTSEL_1 ((uint32_t)0x00000800) /*!< COMP2 output select bit 1 */
+#define COMP2_CSR_COMP2OUTSEL_2 ((uint32_t)0x00001000) /*!< COMP2 output select bit 2 */
+#define COMP2_CSR_COMP2OUTSEL_3 ((uint32_t)0x00002000) /*!< COMP2 output select bit 3 */
+#define COMP2_CSR_COMP2POL ((uint32_t)0x00008000) /*!< COMP2 output polarity */
+#define COMP2_CSR_COMP2BLANKING ((uint32_t)0x000C0000) /*!< COMP2 blanking */
+#define COMP2_CSR_COMP2BLANKING_0 ((uint32_t)0x00040000) /*!< COMP2 blanking bit 0 */
+#define COMP2_CSR_COMP2BLANKING_1 ((uint32_t)0x00080000) /*!< COMP2 blanking bit 1 */
+#define COMP2_CSR_COMP2BLANKING_2 ((uint32_t)0x00100000) /*!< COMP2 blanking bit 2 */
+#define COMP2_CSR_COMP2OUT ((uint32_t)0x40000000) /*!< COMP2 output level */
+#define COMP2_CSR_COMP2LOCK ((uint32_t)0x80000000) /*!< COMP2 lock */
+
+/********************** Bit definition for COMP3_CSR register ***************/
+#define COMP3_CSR_COMP3EN ((uint32_t)0x00000001) /*!< COMP3 enable */
+#define COMP3_CSR_COMP3INSEL ((uint32_t)0x00000070) /*!< COMP3 inverting input select */
+#define COMP3_CSR_COMP3INSEL_0 ((uint32_t)0x00000010) /*!< COMP3 inverting input select bit 0 */
+#define COMP3_CSR_COMP3INSEL_1 ((uint32_t)0x00000020) /*!< COMP3 inverting input select bit 1 */
+#define COMP3_CSR_COMP3INSEL_2 ((uint32_t)0x00000040) /*!< COMP3 inverting input select bit 2 */
+#define COMP3_CSR_COMP3OUTSEL ((uint32_t)0x00003C00) /*!< COMP3 output select */
+#define COMP3_CSR_COMP3OUTSEL_0 ((uint32_t)0x00000400) /*!< COMP3 output select bit 0 */
+#define COMP3_CSR_COMP3OUTSEL_1 ((uint32_t)0x00000800) /*!< COMP3 output select bit 1 */
+#define COMP3_CSR_COMP3OUTSEL_2 ((uint32_t)0x00001000) /*!< COMP3 output select bit 2 */
+#define COMP3_CSR_COMP3OUTSEL_3 ((uint32_t)0x00002000) /*!< COMP3 output select bit 3 */
+#define COMP3_CSR_COMP3POL ((uint32_t)0x00008000) /*!< COMP3 output polarity */
+#define COMP3_CSR_COMP3BLANKING ((uint32_t)0x000C0000) /*!< COMP3 blanking */
+#define COMP3_CSR_COMP3BLANKING_0 ((uint32_t)0x00040000) /*!< COMP3 blanking bit 0 */
+#define COMP3_CSR_COMP3BLANKING_1 ((uint32_t)0x00080000) /*!< COMP3 blanking bit 1 */
+#define COMP3_CSR_COMP3BLANKING_2 ((uint32_t)0x00100000) /*!< COMP3 blanking bit 2 */
+#define COMP3_CSR_COMP3OUT ((uint32_t)0x40000000) /*!< COMP3 output level */
+#define COMP3_CSR_COMP3LOCK ((uint32_t)0x80000000) /*!< COMP3 lock */
+
+/********************** Bit definition for COMP4_CSR register ***************/
+#define COMP4_CSR_COMP4EN ((uint32_t)0x00000001) /*!< COMP4 enable */
+#define COMP4_CSR_COMP4INSEL ((uint32_t)0x00400070) /*!< COMP4 inverting input select */
+#define COMP4_CSR_COMP4INSEL_0 ((uint32_t)0x00000010) /*!< COMP4 inverting input select bit 0 */
+#define COMP4_CSR_COMP4INSEL_1 ((uint32_t)0x00000020) /*!< COMP4 inverting input select bit 1 */
+#define COMP4_CSR_COMP4INSEL_2 ((uint32_t)0x00000040) /*!< COMP4 inverting input select bit 2 */
+#define COMP4_CSR_COMP4INSEL_3 ((uint32_t)0x00400000) /*!< COMP4 inverting input select bit 3 */
+#define COMP4_CSR_COMP4OUTSEL ((uint32_t)0x00003C00) /*!< COMP4 output select */
+#define COMP4_CSR_COMP4OUTSEL_0 ((uint32_t)0x00000400) /*!< COMP4 output select bit 0 */
+#define COMP4_CSR_COMP4OUTSEL_1 ((uint32_t)0x00000800) /*!< COMP4 output select bit 1 */
+#define COMP4_CSR_COMP4OUTSEL_2 ((uint32_t)0x00001000) /*!< COMP4 output select bit 2 */
+#define COMP4_CSR_COMP4OUTSEL_3 ((uint32_t)0x00002000) /*!< COMP4 output select bit 3 */
+#define COMP4_CSR_COMP4POL ((uint32_t)0x00008000) /*!< COMP4 output polarity */
+#define COMP4_CSR_COMP4BLANKING ((uint32_t)0x000C0000) /*!< COMP4 blanking */
+#define COMP4_CSR_COMP4BLANKING_0 ((uint32_t)0x00040000) /*!< COMP4 blanking bit 0 */
+#define COMP4_CSR_COMP4BLANKING_1 ((uint32_t)0x00080000) /*!< COMP4 blanking bit 1 */
+#define COMP4_CSR_COMP4BLANKING_2 ((uint32_t)0x00100000) /*!< COMP4 blanking bit 2 */
+#define COMP4_CSR_COMP4OUT ((uint32_t)0x40000000) /*!< COMP4 output level */
+#define COMP4_CSR_COMP4LOCK ((uint32_t)0x80000000) /*!< COMP4 lock */
+
+/********************** Bit definition for COMP5_CSR register ***************/
+#define COMP5_CSR_COMP5EN ((uint32_t)0x00000001) /*!< COMP5 enable */
+#define COMP5_CSR_COMP5INSEL ((uint32_t)0x00000070) /*!< COMP5 inverting input select */
+#define COMP5_CSR_COMP5INSEL_0 ((uint32_t)0x00000010) /*!< COMP5 inverting input select bit 0 */
+#define COMP5_CSR_COMP5INSEL_1 ((uint32_t)0x00000020) /*!< COMP5 inverting input select bit 1 */
+#define COMP5_CSR_COMP5INSEL_2 ((uint32_t)0x00000040) /*!< COMP5 inverting input select bit 2 */
+#define COMP5_CSR_COMP5OUTSEL ((uint32_t)0x00003C00) /*!< COMP5 output select */
+#define COMP5_CSR_COMP5OUTSEL_0 ((uint32_t)0x00000400) /*!< COMP5 output select bit 0 */
+#define COMP5_CSR_COMP5OUTSEL_1 ((uint32_t)0x00000800) /*!< COMP5 output select bit 1 */
+#define COMP5_CSR_COMP5OUTSEL_2 ((uint32_t)0x00001000) /*!< COMP5 output select bit 2 */
+#define COMP5_CSR_COMP5OUTSEL_3 ((uint32_t)0x00002000) /*!< COMP5 output select bit 3 */
+#define COMP5_CSR_COMP5POL ((uint32_t)0x00008000) /*!< COMP5 output polarity */
+#define COMP5_CSR_COMP5BLANKING ((uint32_t)0x000C0000) /*!< COMP5 blanking */
+#define COMP5_CSR_COMP5BLANKING_0 ((uint32_t)0x00040000) /*!< COMP5 blanking bit 0 */
+#define COMP5_CSR_COMP5BLANKING_1 ((uint32_t)0x00080000) /*!< COMP5 blanking bit 1 */
+#define COMP5_CSR_COMP5BLANKING_2 ((uint32_t)0x00100000) /*!< COMP5 blanking bit 2 */
+#define COMP5_CSR_COMP5OUT ((uint32_t)0x40000000) /*!< COMP5 output level */
+#define COMP5_CSR_COMP5LOCK ((uint32_t)0x80000000) /*!< COMP5 lock */
+
+/********************** Bit definition for COMP6_CSR register ***************/
+#define COMP6_CSR_COMP6EN ((uint32_t)0x00000001) /*!< COMP6 enable */
+#define COMP6_CSR_COMP6INSEL ((uint32_t)0x00400070) /*!< COMP6 inverting input select */
+#define COMP6_CSR_COMP6INSEL_0 ((uint32_t)0x00000010) /*!< COMP6 inverting input select bit 0 */
+#define COMP6_CSR_COMP6INSEL_1 ((uint32_t)0x00000020) /*!< COMP6 inverting input select bit 1 */
+#define COMP6_CSR_COMP6INSEL_2 ((uint32_t)0x00000040) /*!< COMP6 inverting input select bit 2 */
+#define COMP6_CSR_COMP6INSEL_3 ((uint32_t)0x00400000) /*!< COMP6 inverting input select bit 3 */
+#define COMP6_CSR_COMP6OUTSEL ((uint32_t)0x00003C00) /*!< COMP6 output select */
+#define COMP6_CSR_COMP6OUTSEL_0 ((uint32_t)0x00000400) /*!< COMP6 output select bit 0 */
+#define COMP6_CSR_COMP6OUTSEL_1 ((uint32_t)0x00000800) /*!< COMP6 output select bit 1 */
+#define COMP6_CSR_COMP6OUTSEL_2 ((uint32_t)0x00001000) /*!< COMP6 output select bit 2 */
+#define COMP6_CSR_COMP6OUTSEL_3 ((uint32_t)0x00002000) /*!< COMP6 output select bit 3 */
+#define COMP6_CSR_COMP6POL ((uint32_t)0x00008000) /*!< COMP6 output polarity */
+#define COMP6_CSR_COMP6BLANKING ((uint32_t)0x000C0000) /*!< COMP6 blanking */
+#define COMP6_CSR_COMP6BLANKING_0 ((uint32_t)0x00040000) /*!< COMP6 blanking bit 0 */
+#define COMP6_CSR_COMP6BLANKING_1 ((uint32_t)0x00080000) /*!< COMP6 blanking bit 1 */
+#define COMP6_CSR_COMP6BLANKING_2 ((uint32_t)0x00100000) /*!< COMP6 blanking bit 2 */
+#define COMP6_CSR_COMP6OUT ((uint32_t)0x40000000) /*!< COMP6 output level */
+#define COMP6_CSR_COMP6LOCK ((uint32_t)0x80000000) /*!< COMP6 lock */
+
+/********************** Bit definition for COMP7_CSR register ***************/
+#define COMP7_CSR_COMP7EN ((uint32_t)0x00000001) /*!< COMP7 enable */
+#define COMP7_CSR_COMP7INSEL ((uint32_t)0x00000070) /*!< COMP7 inverting input select */
+#define COMP7_CSR_COMP7INSEL_0 ((uint32_t)0x00000010) /*!< COMP7 inverting input select bit 0 */
+#define COMP7_CSR_COMP7INSEL_1 ((uint32_t)0x00000020) /*!< COMP7 inverting input select bit 1 */
+#define COMP7_CSR_COMP7INSEL_2 ((uint32_t)0x00000040) /*!< COMP7 inverting input select bit 2 */
+#define COMP7_CSR_COMP7OUTSEL ((uint32_t)0x00003C00) /*!< COMP7 output select */
+#define COMP7_CSR_COMP7OUTSEL_0 ((uint32_t)0x00000400) /*!< COMP7 output select bit 0 */
+#define COMP7_CSR_COMP7OUTSEL_1 ((uint32_t)0x00000800) /*!< COMP7 output select bit 1 */
+#define COMP7_CSR_COMP7OUTSEL_2 ((uint32_t)0x00001000) /*!< COMP7 output select bit 2 */
+#define COMP7_CSR_COMP7OUTSEL_3 ((uint32_t)0x00002000) /*!< COMP7 output select bit 3 */
+#define COMP7_CSR_COMP7POL ((uint32_t)0x00008000) /*!< COMP7 output polarity */
+#define COMP7_CSR_COMP7BLANKING ((uint32_t)0x000C0000) /*!< COMP7 blanking */
+#define COMP7_CSR_COMP7BLANKING_0 ((uint32_t)0x00040000) /*!< COMP7 blanking bit 0 */
+#define COMP7_CSR_COMP7BLANKING_1 ((uint32_t)0x00080000) /*!< COMP7 blanking bit 1 */
+#define COMP7_CSR_COMP7BLANKING_2 ((uint32_t)0x00100000) /*!< COMP7 blanking bit 2 */
+#define COMP7_CSR_COMP7OUT ((uint32_t)0x40000000) /*!< COMP7 output level */
+#define COMP7_CSR_COMP7LOCK ((uint32_t)0x80000000) /*!< COMP7 lock */
+
+/********************** Bit definition for COMP_CSR register ****************/
+#define COMP_CSR_COMPxEN ((uint32_t)0x00000001) /*!< COMPx enable */
+#define COMP_CSR_COMPxINSEL ((uint32_t)0x00400070) /*!< COMPx inverting input select */
+#define COMP_CSR_COMPxINSEL_0 ((uint32_t)0x00000010) /*!< COMPx inverting input select bit 0 */
+#define COMP_CSR_COMPxINSEL_1 ((uint32_t)0x00000020) /*!< COMPx inverting input select bit 1 */
+#define COMP_CSR_COMPxINSEL_2 ((uint32_t)0x00000040) /*!< COMPx inverting input select bit 2 */
+#define COMP_CSR_COMPxINSEL_3 ((uint32_t)0x00400000) /*!< COMPx inverting input select bit 3 */
+#define COMP_CSR_COMPxOUTSEL ((uint32_t)0x00003C00) /*!< COMPx output select */
+#define COMP_CSR_COMPxOUTSEL_0 ((uint32_t)0x00000400) /*!< COMPx output select bit 0 */
+#define COMP_CSR_COMPxOUTSEL_1 ((uint32_t)0x00000800) /*!< COMPx output select bit 1 */
+#define COMP_CSR_COMPxOUTSEL_2 ((uint32_t)0x00001000) /*!< COMPx output select bit 2 */
+#define COMP_CSR_COMPxOUTSEL_3 ((uint32_t)0x00002000) /*!< COMPx output select bit 3 */
+#define COMP_CSR_COMPxPOL ((uint32_t)0x00008000) /*!< COMPx output polarity */
+#define COMP_CSR_COMPxBLANKING ((uint32_t)0x000C0000) /*!< COMPx blanking */
+#define COMP_CSR_COMPxBLANKING_0 ((uint32_t)0x00040000) /*!< COMPx blanking bit 0 */
+#define COMP_CSR_COMPxBLANKING_1 ((uint32_t)0x00080000) /*!< COMPx blanking bit 1 */
+#define COMP_CSR_COMPxBLANKING_2 ((uint32_t)0x00100000) /*!< COMPx blanking bit 2 */
+#define COMP_CSR_COMPxOUT ((uint32_t)0x40000000) /*!< COMPx output level */
+#define COMP_CSR_COMPxLOCK ((uint32_t)0x80000000) /*!< COMPx lock */
+
+/******************************************************************************/
+/* */
+/* Operational Amplifier (OPAMP) */
+/* */
+/******************************************************************************/
+/********************* Bit definition for OPAMP1_CSR register ***************/
+#define OPAMP1_CSR_OPAMP1EN ((uint32_t)0x00000001) /*!< OPAMP1 enable */
+#define OPAMP1_CSR_FORCEVP ((uint32_t)0x00000002) /*!< Connect the internal references to the plus input of the OPAMPX */
+#define OPAMP1_CSR_VPSEL ((uint32_t)0x0000000C) /*!< Non inverting input selection */
+#define OPAMP1_CSR_VPSEL_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define OPAMP1_CSR_VPSEL_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+#define OPAMP1_CSR_VMSEL ((uint32_t)0x00000060) /*!< Inverting input selection */
+#define OPAMP1_CSR_VMSEL_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define OPAMP1_CSR_VMSEL_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define OPAMP1_CSR_TCMEN ((uint32_t)0x00000080) /*!< Timer-Controlled Mux mode enable */
+#define OPAMP1_CSR_VMSSEL ((uint32_t)0x00000100) /*!< Inverting input secondary selection */
+#define OPAMP1_CSR_VPSSEL ((uint32_t)0x00000600) /*!< Non inverting input secondary selection */
+#define OPAMP1_CSR_VPSSEL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define OPAMP1_CSR_VPSSEL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define OPAMP1_CSR_CALON ((uint32_t)0x00000800) /*!< Calibration mode enable */
+#define OPAMP1_CSR_CALSEL ((uint32_t)0x00003000) /*!< Calibration selection */
+#define OPAMP1_CSR_CALSEL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define OPAMP1_CSR_CALSEL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define OPAMP1_CSR_PGGAIN ((uint32_t)0x0003C000) /*!< Gain in PGA mode */
+#define OPAMP1_CSR_PGGAIN_0 ((uint32_t)0x00004000) /*!< Bit 0 */
+#define OPAMP1_CSR_PGGAIN_1 ((uint32_t)0x00008000) /*!< Bit 1 */
+#define OPAMP1_CSR_PGGAIN_2 ((uint32_t)0x00010000) /*!< Bit 2 */
+#define OPAMP1_CSR_PGGAIN_3 ((uint32_t)0x00020000) /*!< Bit 3 */
+#define OPAMP1_CSR_USERTRIM ((uint32_t)0x00040000) /*!< User trimming enable */
+#define OPAMP1_CSR_TRIMOFFSETP ((uint32_t)0x00F80000) /*!< Offset trimming value (PMOS) */
+#define OPAMP1_CSR_TRIMOFFSETN ((uint32_t)0x1F000000) /*!< Offset trimming value (NMOS) */
+#define OPAMP1_CSR_TSTREF ((uint32_t)0x20000000) /*!< It enables the switch to put out the internal reference */
+#define OPAMP1_CSR_OUTCAL ((uint32_t)0x40000000) /*!< OPAMP ouput status flag */
+#define OPAMP1_CSR_LOCK ((uint32_t)0x80000000) /*!< OPAMP lock */
+
+/********************* Bit definition for OPAMP2_CSR register ***************/
+#define OPAMP2_CSR_OPAMP2EN ((uint32_t)0x00000001) /*!< OPAMP2 enable */
+#define OPAMP2_CSR_FORCEVP ((uint32_t)0x00000002) /*!< Connect the internal references to the plus input of the OPAMPX */
+#define OPAMP2_CSR_VPSEL ((uint32_t)0x0000000C) /*!< Non inverting input selection */
+#define OPAMP2_CSR_VPSEL_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define OPAMP2_CSR_VPSEL_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+#define OPAMP2_CSR_VMSEL ((uint32_t)0x00000060) /*!< Inverting input selection */
+#define OPAMP2_CSR_VMSEL_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define OPAMP2_CSR_VMSEL_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define OPAMP2_CSR_TCMEN ((uint32_t)0x00000080) /*!< Timer-Controlled Mux mode enable */
+#define OPAMP2_CSR_VMSSEL ((uint32_t)0x00000100) /*!< Inverting input secondary selection */
+#define OPAMP2_CSR_VPSSEL ((uint32_t)0x00000600) /*!< Non inverting input secondary selection */
+#define OPAMP2_CSR_VPSSEL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define OPAMP2_CSR_VPSSEL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define OPAMP2_CSR_CALON ((uint32_t)0x00000800) /*!< Calibration mode enable */
+#define OPAMP2_CSR_CALSEL ((uint32_t)0x00003000) /*!< Calibration selection */
+#define OPAMP2_CSR_CALSEL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define OPAMP2_CSR_CALSEL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define OPAMP2_CSR_PGGAIN ((uint32_t)0x0003C000) /*!< Gain in PGA mode */
+#define OPAMP2_CSR_PGGAIN_0 ((uint32_t)0x00004000) /*!< Bit 0 */
+#define OPAMP2_CSR_PGGAIN_1 ((uint32_t)0x00008000) /*!< Bit 1 */
+#define OPAMP2_CSR_PGGAIN_2 ((uint32_t)0x00010000) /*!< Bit 2 */
+#define OPAMP2_CSR_PGGAIN_3 ((uint32_t)0x00020000) /*!< Bit 3 */
+#define OPAMP2_CSR_USERTRIM ((uint32_t)0x00040000) /*!< User trimming enable */
+#define OPAMP2_CSR_TRIMOFFSETP ((uint32_t)0x00F80000) /*!< Offset trimming value (PMOS) */
+#define OPAMP2_CSR_TRIMOFFSETN ((uint32_t)0x1F000000) /*!< Offset trimming value (NMOS) */
+#define OPAMP2_CSR_TSTREF ((uint32_t)0x20000000) /*!< It enables the switch to put out the internal reference */
+#define OPAMP2_CSR_OUTCAL ((uint32_t)0x40000000) /*!< OPAMP ouput status flag */
+#define OPAMP2_CSR_LOCK ((uint32_t)0x80000000) /*!< OPAMP lock */
+
+/********************* Bit definition for OPAMP3_CSR register ***************/
+#define OPAMP3_CSR_OPAMP3EN ((uint32_t)0x00000001) /*!< OPAMP3 enable */
+#define OPAMP3_CSR_FORCEVP ((uint32_t)0x00000002) /*!< Connect the internal references to the plus input of the OPAMPX */
+#define OPAMP3_CSR_VPSEL ((uint32_t)0x0000000C) /*!< Non inverting input selection */
+#define OPAMP3_CSR_VPSEL_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define OPAMP3_CSR_VPSEL_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+#define OPAMP3_CSR_VMSEL ((uint32_t)0x00000060) /*!< Inverting input selection */
+#define OPAMP3_CSR_VMSEL_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define OPAMP3_CSR_VMSEL_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define OPAMP3_CSR_TCMEN ((uint32_t)0x00000080) /*!< Timer-Controlled Mux mode enable */
+#define OPAMP3_CSR_VMSSEL ((uint32_t)0x00000100) /*!< Inverting input secondary selection */
+#define OPAMP3_CSR_VPSSEL ((uint32_t)0x00000600) /*!< Non inverting input secondary selection */
+#define OPAMP3_CSR_VPSSEL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define OPAMP3_CSR_VPSSEL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define OPAMP3_CSR_CALON ((uint32_t)0x00000800) /*!< Calibration mode enable */
+#define OPAMP3_CSR_CALSEL ((uint32_t)0x00003000) /*!< Calibration selection */
+#define OPAMP3_CSR_CALSEL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define OPAMP3_CSR_CALSEL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define OPAMP3_CSR_PGGAIN ((uint32_t)0x0003C000) /*!< Gain in PGA mode */
+#define OPAMP3_CSR_PGGAIN_0 ((uint32_t)0x00004000) /*!< Bit 0 */
+#define OPAMP3_CSR_PGGAIN_1 ((uint32_t)0x00008000) /*!< Bit 1 */
+#define OPAMP3_CSR_PGGAIN_2 ((uint32_t)0x00010000) /*!< Bit 2 */
+#define OPAMP3_CSR_PGGAIN_3 ((uint32_t)0x00020000) /*!< Bit 3 */
+#define OPAMP3_CSR_USERTRIM ((uint32_t)0x00040000) /*!< User trimming enable */
+#define OPAMP3_CSR_TRIMOFFSETP ((uint32_t)0x00F80000) /*!< Offset trimming value (PMOS) */
+#define OPAMP3_CSR_TRIMOFFSETN ((uint32_t)0x1F000000) /*!< Offset trimming value (NMOS) */
+#define OPAMP3_CSR_TSTREF ((uint32_t)0x20000000) /*!< It enables the switch to put out the internal reference */
+#define OPAMP3_CSR_OUTCAL ((uint32_t)0x40000000) /*!< OPAMP ouput status flag */
+#define OPAMP3_CSR_LOCK ((uint32_t)0x80000000) /*!< OPAMP lock */
+
+/********************* Bit definition for OPAMP4_CSR register ***************/
+#define OPAMP4_CSR_OPAMP4EN ((uint32_t)0x00000001) /*!< OPAMP4 enable */
+#define OPAMP4_CSR_FORCEVP ((uint32_t)0x00000002) /*!< Connect the internal references to the plus input of the OPAMPX */
+#define OPAMP4_CSR_VPSEL ((uint32_t)0x0000000C) /*!< Non inverting input selection */
+#define OPAMP4_CSR_VPSEL_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define OPAMP4_CSR_VPSEL_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+#define OPAMP4_CSR_VMSEL ((uint32_t)0x00000060) /*!< Inverting input selection */
+#define OPAMP4_CSR_VMSEL_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define OPAMP4_CSR_VMSEL_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define OPAMP4_CSR_TCMEN ((uint32_t)0x00000080) /*!< Timer-Controlled Mux mode enable */
+#define OPAMP4_CSR_VMSSEL ((uint32_t)0x00000100) /*!< Inverting input secondary selection */
+#define OPAMP4_CSR_VPSSEL ((uint32_t)0x00000600) /*!< Non inverting input secondary selection */
+#define OPAMP4_CSR_VPSSEL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define OPAMP4_CSR_VPSSEL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define OPAMP4_CSR_CALON ((uint32_t)0x00000800) /*!< Calibration mode enable */
+#define OPAMP4_CSR_CALSEL ((uint32_t)0x00003000) /*!< Calibration selection */
+#define OPAMP4_CSR_CALSEL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define OPAMP4_CSR_CALSEL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define OPAMP4_CSR_PGGAIN ((uint32_t)0x0003C000) /*!< Gain in PGA mode */
+#define OPAMP4_CSR_PGGAIN_0 ((uint32_t)0x00004000) /*!< Bit 0 */
+#define OPAMP4_CSR_PGGAIN_1 ((uint32_t)0x00008000) /*!< Bit 1 */
+#define OPAMP4_CSR_PGGAIN_2 ((uint32_t)0x00010000) /*!< Bit 2 */
+#define OPAMP4_CSR_PGGAIN_3 ((uint32_t)0x00020000) /*!< Bit 3 */
+#define OPAMP4_CSR_USERTRIM ((uint32_t)0x00040000) /*!< User trimming enable */
+#define OPAMP4_CSR_TRIMOFFSETP ((uint32_t)0x00F80000) /*!< Offset trimming value (PMOS) */
+#define OPAMP4_CSR_TRIMOFFSETN ((uint32_t)0x1F000000) /*!< Offset trimming value (NMOS) */
+#define OPAMP4_CSR_TSTREF ((uint32_t)0x20000000) /*!< It enables the switch to put out the internal reference */
+#define OPAMP4_CSR_OUTCAL ((uint32_t)0x40000000) /*!< OPAMP ouput status flag */
+#define OPAMP4_CSR_LOCK ((uint32_t)0x80000000) /*!< OPAMP lock */
+
+/********************* Bit definition for OPAMPx_CSR register ***************/
+#define OPAMP_CSR_OPAMPxEN ((uint32_t)0x00000001) /*!< OPAMP enable */
+#define OPAMP_CSR_FORCEVP ((uint32_t)0x00000002) /*!< Connect the internal references to the plus input of the OPAMPX */
+#define OPAMP_CSR_VPSEL ((uint32_t)0x0000000C) /*!< Non inverting input selection */
+#define OPAMP_CSR_VPSEL_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define OPAMP_CSR_VPSEL_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+#define OPAMP_CSR_VMSEL ((uint32_t)0x00000060) /*!< Inverting input selection */
+#define OPAMP_CSR_VMSEL_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define OPAMP_CSR_VMSEL_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define OPAMP_CSR_TCMEN ((uint32_t)0x00000080) /*!< Timer-Controlled Mux mode enable */
+#define OPAMP_CSR_VMSSEL ((uint32_t)0x00000100) /*!< Inverting input secondary selection */
+#define OPAMP_CSR_VPSSEL ((uint32_t)0x00000600) /*!< Non inverting input secondary selection */
+#define OPAMP_CSR_VPSSEL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define OPAMP_CSR_VPSSEL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define OPAMP_CSR_CALON ((uint32_t)0x00000800) /*!< Calibration mode enable */
+#define OPAMP_CSR_CALSEL ((uint32_t)0x00003000) /*!< Calibration selection */
+#define OPAMP_CSR_CALSEL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define OPAMP_CSR_CALSEL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define OPAMP_CSR_PGGAIN ((uint32_t)0x0003C000) /*!< Gain in PGA mode */
+#define OPAMP_CSR_PGGAIN_0 ((uint32_t)0x00004000) /*!< Bit 0 */
+#define OPAMP_CSR_PGGAIN_1 ((uint32_t)0x00008000) /*!< Bit 1 */
+#define OPAMP_CSR_PGGAIN_2 ((uint32_t)0x00010000) /*!< Bit 2 */
+#define OPAMP_CSR_PGGAIN_3 ((uint32_t)0x00020000) /*!< Bit 3 */
+#define OPAMP_CSR_USERTRIM ((uint32_t)0x00040000) /*!< User trimming enable */
+#define OPAMP_CSR_TRIMOFFSETP ((uint32_t)0x00F80000) /*!< Offset trimming value (PMOS) */
+#define OPAMP_CSR_TRIMOFFSETN ((uint32_t)0x1F000000) /*!< Offset trimming value (NMOS) */
+#define OPAMP_CSR_TSTREF ((uint32_t)0x20000000) /*!< It enables the switch to put out the internal reference */
+#define OPAMP_CSR_OUTCAL ((uint32_t)0x40000000) /*!< OPAMP ouput status flag */
+#define OPAMP_CSR_LOCK ((uint32_t)0x80000000) /*!< OPAMP lock */
+
+/******************************************************************************/
+/* */
+/* Controller Area Network (CAN ) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CAN_MCR register ********************/
+#define CAN_MCR_INRQ ((uint32_t)0x00000001) /*!<Initialization Request */
+#define CAN_MCR_SLEEP ((uint32_t)0x00000002) /*!<Sleep Mode Request */
+#define CAN_MCR_TXFP ((uint32_t)0x00000004) /*!<Transmit FIFO Priority */
+#define CAN_MCR_RFLM ((uint32_t)0x00000008) /*!<Receive FIFO Locked Mode */
+#define CAN_MCR_NART ((uint32_t)0x00000010) /*!<No Automatic Retransmission */
+#define CAN_MCR_AWUM ((uint32_t)0x00000020) /*!<Automatic Wakeup Mode */
+#define CAN_MCR_ABOM ((uint32_t)0x00000040) /*!<Automatic Bus-Off Management */
+#define CAN_MCR_TTCM ((uint32_t)0x00000080) /*!<Time Triggered Communication Mode */
+#define CAN_MCR_RESET ((uint32_t)0x00008000) /*!<bxCAN software master reset */
+
+/******************* Bit definition for CAN_MSR register ********************/
+#define CAN_MSR_INAK ((uint32_t)0x00000001) /*!<Initialization Acknowledge */
+#define CAN_MSR_SLAK ((uint32_t)0x00000002) /*!<Sleep Acknowledge */
+#define CAN_MSR_ERRI ((uint32_t)0x00000004) /*!<Error Interrupt */
+#define CAN_MSR_WKUI ((uint32_t)0x00000008) /*!<Wakeup Interrupt */
+#define CAN_MSR_SLAKI ((uint32_t)0x00000010) /*!<Sleep Acknowledge Interrupt */
+#define CAN_MSR_TXM ((uint32_t)0x00000100) /*!<Transmit Mode */
+#define CAN_MSR_RXM ((uint32_t)0x00000200) /*!<Receive Mode */
+#define CAN_MSR_SAMP ((uint32_t)0x00000400) /*!<Last Sample Point */
+#define CAN_MSR_RX ((uint32_t)0x00000800) /*!<CAN Rx Signal */
+
+/******************* Bit definition for CAN_TSR register ********************/
+#define CAN_TSR_RQCP0 ((uint32_t)0x00000001) /*!<Request Completed Mailbox0 */
+#define CAN_TSR_TXOK0 ((uint32_t)0x00000002) /*!<Transmission OK of Mailbox0 */
+#define CAN_TSR_ALST0 ((uint32_t)0x00000004) /*!<Arbitration Lost for Mailbox0 */
+#define CAN_TSR_TERR0 ((uint32_t)0x00000008) /*!<Transmission Error of Mailbox0 */
+#define CAN_TSR_ABRQ0 ((uint32_t)0x00000080) /*!<Abort Request for Mailbox0 */
+#define CAN_TSR_RQCP1 ((uint32_t)0x00000100) /*!<Request Completed Mailbox1 */
+#define CAN_TSR_TXOK1 ((uint32_t)0x00000200) /*!<Transmission OK of Mailbox1 */
+#define CAN_TSR_ALST1 ((uint32_t)0x00000400) /*!<Arbitration Lost for Mailbox1 */
+#define CAN_TSR_TERR1 ((uint32_t)0x00000800) /*!<Transmission Error of Mailbox1 */
+#define CAN_TSR_ABRQ1 ((uint32_t)0x00008000) /*!<Abort Request for Mailbox 1 */
+#define CAN_TSR_RQCP2 ((uint32_t)0x00010000) /*!<Request Completed Mailbox2 */
+#define CAN_TSR_TXOK2 ((uint32_t)0x00020000) /*!<Transmission OK of Mailbox 2 */
+#define CAN_TSR_ALST2 ((uint32_t)0x00040000) /*!<Arbitration Lost for mailbox 2 */
+#define CAN_TSR_TERR2 ((uint32_t)0x00080000) /*!<Transmission Error of Mailbox 2 */
+#define CAN_TSR_ABRQ2 ((uint32_t)0x00800000) /*!<Abort Request for Mailbox 2 */
+#define CAN_TSR_CODE ((uint32_t)0x03000000) /*!<Mailbox Code */
+
+#define CAN_TSR_TME ((uint32_t)0x1C000000) /*!<TME[2:0] bits */
+#define CAN_TSR_TME0 ((uint32_t)0x04000000) /*!<Transmit Mailbox 0 Empty */
+#define CAN_TSR_TME1 ((uint32_t)0x08000000) /*!<Transmit Mailbox 1 Empty */
+#define CAN_TSR_TME2 ((uint32_t)0x10000000) /*!<Transmit Mailbox 2 Empty */
+
+#define CAN_TSR_LOW ((uint32_t)0xE0000000) /*!<LOW[2:0] bits */
+#define CAN_TSR_LOW0 ((uint32_t)0x20000000) /*!<Lowest Priority Flag for Mailbox 0 */
+#define CAN_TSR_LOW1 ((uint32_t)0x40000000) /*!<Lowest Priority Flag for Mailbox 1 */
+#define CAN_TSR_LOW2 ((uint32_t)0x80000000) /*!<Lowest Priority Flag for Mailbox 2 */
+
+/******************* Bit definition for CAN_RF0R register *******************/
+#define CAN_RF0R_FMP0 ((uint32_t)0x00000003) /*!<FIFO 0 Message Pending */
+#define CAN_RF0R_FULL0 ((uint32_t)0x00000008) /*!<FIFO 0 Full */
+#define CAN_RF0R_FOVR0 ((uint32_t)0x00000010) /*!<FIFO 0 Overrun */
+#define CAN_RF0R_RFOM0 ((uint32_t)0x00000020) /*!<Release FIFO 0 Output Mailbox */
+
+/******************* Bit definition for CAN_RF1R register *******************/
+#define CAN_RF1R_FMP1 ((uint32_t)0x00000003) /*!<FIFO 1 Message Pending */
+#define CAN_RF1R_FULL1 ((uint32_t)0x00000008) /*!<FIFO 1 Full */
+#define CAN_RF1R_FOVR1 ((uint32_t)0x00000010) /*!<FIFO 1 Overrun */
+#define CAN_RF1R_RFOM1 ((uint32_t)0x00000020) /*!<Release FIFO 1 Output Mailbox */
+
+/******************** Bit definition for CAN_IER register *******************/
+#define CAN_IER_TMEIE ((uint32_t)0x00000001) /*!<Transmit Mailbox Empty Interrupt Enable */
+#define CAN_IER_FMPIE0 ((uint32_t)0x00000002) /*!<FIFO Message Pending Interrupt Enable */
+#define CAN_IER_FFIE0 ((uint32_t)0x00000004) /*!<FIFO Full Interrupt Enable */
+#define CAN_IER_FOVIE0 ((uint32_t)0x00000008) /*!<FIFO Overrun Interrupt Enable */
+#define CAN_IER_FMPIE1 ((uint32_t)0x00000010) /*!<FIFO Message Pending Interrupt Enable */
+#define CAN_IER_FFIE1 ((uint32_t)0x00000020) /*!<FIFO Full Interrupt Enable */
+#define CAN_IER_FOVIE1 ((uint32_t)0x00000040) /*!<FIFO Overrun Interrupt Enable */
+#define CAN_IER_EWGIE ((uint32_t)0x00000100) /*!<Error Warning Interrupt Enable */
+#define CAN_IER_EPVIE ((uint32_t)0x00000200) /*!<Error Passive Interrupt Enable */
+#define CAN_IER_BOFIE ((uint32_t)0x00000400) /*!<Bus-Off Interrupt Enable */
+#define CAN_IER_LECIE ((uint32_t)0x00000800) /*!<Last Error Code Interrupt Enable */
+#define CAN_IER_ERRIE ((uint32_t)0x00008000) /*!<Error Interrupt Enable */
+#define CAN_IER_WKUIE ((uint32_t)0x00010000) /*!<Wakeup Interrupt Enable */
+#define CAN_IER_SLKIE ((uint32_t)0x00020000) /*!<Sleep Interrupt Enable */
+
+/******************** Bit definition for CAN_ESR register *******************/
+#define CAN_ESR_EWGF ((uint32_t)0x00000001) /*!<Error Warning Flag */
+#define CAN_ESR_EPVF ((uint32_t)0x00000002) /*!<Error Passive Flag */
+#define CAN_ESR_BOFF ((uint32_t)0x00000004) /*!<Bus-Off Flag */
+
+#define CAN_ESR_LEC ((uint32_t)0x00000070) /*!<LEC[2:0] bits (Last Error Code) */
+#define CAN_ESR_LEC_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define CAN_ESR_LEC_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define CAN_ESR_LEC_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define CAN_ESR_TEC ((uint32_t)0x00FF0000) /*!<Least significant byte of the 9-bit Transmit Error Counter */
+#define CAN_ESR_REC ((uint32_t)0xFF000000) /*!<Receive Error Counter */
+
+/******************* Bit definition for CAN_BTR register ********************/
+#define CAN_BTR_BRP ((uint32_t)0x000003FF) /*!<Baud Rate Prescaler */
+#define CAN_BTR_TS1 ((uint32_t)0x000F0000) /*!<Time Segment 1 */
+#define CAN_BTR_TS1_0 ((uint32_t)0x00010000) /*!<Time Segment 1 (Bit 0) */
+#define CAN_BTR_TS1_1 ((uint32_t)0x00020000) /*!<Time Segment 1 (Bit 1) */
+#define CAN_BTR_TS1_2 ((uint32_t)0x00040000) /*!<Time Segment 1 (Bit 2) */
+#define CAN_BTR_TS1_3 ((uint32_t)0x00080000) /*!<Time Segment 1 (Bit 3) */
+#define CAN_BTR_TS2 ((uint32_t)0x00700000) /*!<Time Segment 2 */
+#define CAN_BTR_TS2_0 ((uint32_t)0x00100000) /*!<Time Segment 2 (Bit 0) */
+#define CAN_BTR_TS2_1 ((uint32_t)0x00200000) /*!<Time Segment 2 (Bit 1) */
+#define CAN_BTR_TS2_2 ((uint32_t)0x00400000) /*!<Time Segment 2 (Bit 2) */
+#define CAN_BTR_SJW ((uint32_t)0x03000000) /*!<Resynchronization Jump Width */
+#define CAN_BTR_SJW_0 ((uint32_t)0x01000000) /*!<Resynchronization Jump Width (Bit 0) */
+#define CAN_BTR_SJW_1 ((uint32_t)0x02000000) /*!<Resynchronization Jump Width (Bit 1) */
+#define CAN_BTR_LBKM ((uint32_t)0x40000000) /*!<Loop Back Mode (Debug) */
+#define CAN_BTR_SILM ((uint32_t)0x80000000) /*!<Silent Mode */
+
+/*!<Mailbox registers */
+/****************** Bit definition for CAN_TI0R register ********************/
+#define CAN_TI0R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI0R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI0R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI0R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_TI0R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/****************** Bit definition for CAN_TDT0R register *******************/
+#define CAN_TDT0R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT0R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT0R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/****************** Bit definition for CAN_TDL0R register *******************/
+#define CAN_TDL0R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL0R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL0R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL0R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/****************** Bit definition for CAN_TDH0R register *******************/
+#define CAN_TDH0R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH0R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH0R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH0R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_TI1R register *******************/
+#define CAN_TI1R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI1R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI1R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI1R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_TI1R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_TDT1R register ******************/
+#define CAN_TDT1R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT1R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT1R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_TDL1R register ******************/
+#define CAN_TDL1R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL1R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL1R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL1R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_TDH1R register ******************/
+#define CAN_TDH1R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH1R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH1R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH1R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_TI2R register *******************/
+#define CAN_TI2R_TXRQ ((uint32_t)0x00000001) /*!<Transmit Mailbox Request */
+#define CAN_TI2R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_TI2R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_TI2R_EXID ((uint32_t)0x001FFFF8) /*!<Extended identifier */
+#define CAN_TI2R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_TDT2R register ******************/
+#define CAN_TDT2R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_TDT2R_TGT ((uint32_t)0x00000100) /*!<Transmit Global Time */
+#define CAN_TDT2R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_TDL2R register ******************/
+#define CAN_TDL2R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_TDL2R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_TDL2R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_TDL2R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_TDH2R register ******************/
+#define CAN_TDH2R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_TDH2R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_TDH2R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_TDH2R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_RI0R register *******************/
+#define CAN_RI0R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_RI0R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_RI0R_EXID ((uint32_t)0x001FFFF8) /*!<Extended Identifier */
+#define CAN_RI0R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_RDT0R register ******************/
+#define CAN_RDT0R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_RDT0R_FMI ((uint32_t)0x0000FF00) /*!<Filter Match Index */
+#define CAN_RDT0R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_RDL0R register ******************/
+#define CAN_RDL0R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_RDL0R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_RDL0R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_RDL0R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_RDH0R register ******************/
+#define CAN_RDH0R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_RDH0R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_RDH0R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_RDH0R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/******************* Bit definition for CAN_RI1R register *******************/
+#define CAN_RI1R_RTR ((uint32_t)0x00000002) /*!<Remote Transmission Request */
+#define CAN_RI1R_IDE ((uint32_t)0x00000004) /*!<Identifier Extension */
+#define CAN_RI1R_EXID ((uint32_t)0x001FFFF8) /*!<Extended identifier */
+#define CAN_RI1R_STID ((uint32_t)0xFFE00000) /*!<Standard Identifier or Extended Identifier */
+
+/******************* Bit definition for CAN_RDT1R register ******************/
+#define CAN_RDT1R_DLC ((uint32_t)0x0000000F) /*!<Data Length Code */
+#define CAN_RDT1R_FMI ((uint32_t)0x0000FF00) /*!<Filter Match Index */
+#define CAN_RDT1R_TIME ((uint32_t)0xFFFF0000) /*!<Message Time Stamp */
+
+/******************* Bit definition for CAN_RDL1R register ******************/
+#define CAN_RDL1R_DATA0 ((uint32_t)0x000000FF) /*!<Data byte 0 */
+#define CAN_RDL1R_DATA1 ((uint32_t)0x0000FF00) /*!<Data byte 1 */
+#define CAN_RDL1R_DATA2 ((uint32_t)0x00FF0000) /*!<Data byte 2 */
+#define CAN_RDL1R_DATA3 ((uint32_t)0xFF000000) /*!<Data byte 3 */
+
+/******************* Bit definition for CAN_RDH1R register ******************/
+#define CAN_RDH1R_DATA4 ((uint32_t)0x000000FF) /*!<Data byte 4 */
+#define CAN_RDH1R_DATA5 ((uint32_t)0x0000FF00) /*!<Data byte 5 */
+#define CAN_RDH1R_DATA6 ((uint32_t)0x00FF0000) /*!<Data byte 6 */
+#define CAN_RDH1R_DATA7 ((uint32_t)0xFF000000) /*!<Data byte 7 */
+
+/*!<CAN filter registers */
+/******************* Bit definition for CAN_FMR register ********************/
+#define CAN_FMR_FINIT ((uint32_t)0x00000001) /*!<Filter Init Mode */
+
+/******************* Bit definition for CAN_FM1R register *******************/
+#define CAN_FM1R_FBM ((uint32_t)0x00003FFF) /*!<Filter Mode */
+#define CAN_FM1R_FBM0 ((uint32_t)0x00000001) /*!<Filter Init Mode bit 0 */
+#define CAN_FM1R_FBM1 ((uint32_t)0x00000002) /*!<Filter Init Mode bit 1 */
+#define CAN_FM1R_FBM2 ((uint32_t)0x00000004) /*!<Filter Init Mode bit 2 */
+#define CAN_FM1R_FBM3 ((uint32_t)0x00000008) /*!<Filter Init Mode bit 3 */
+#define CAN_FM1R_FBM4 ((uint32_t)0x00000010) /*!<Filter Init Mode bit 4 */
+#define CAN_FM1R_FBM5 ((uint32_t)0x00000020) /*!<Filter Init Mode bit 5 */
+#define CAN_FM1R_FBM6 ((uint32_t)0x00000040) /*!<Filter Init Mode bit 6 */
+#define CAN_FM1R_FBM7 ((uint32_t)0x00000080) /*!<Filter Init Mode bit 7 */
+#define CAN_FM1R_FBM8 ((uint32_t)0x00000100) /*!<Filter Init Mode bit 8 */
+#define CAN_FM1R_FBM9 ((uint32_t)0x00000200) /*!<Filter Init Mode bit 9 */
+#define CAN_FM1R_FBM10 ((uint32_t)0x00000400) /*!<Filter Init Mode bit 10 */
+#define CAN_FM1R_FBM11 ((uint32_t)0x00000800) /*!<Filter Init Mode bit 11 */
+#define CAN_FM1R_FBM12 ((uint32_t)0x00001000) /*!<Filter Init Mode bit 12 */
+#define CAN_FM1R_FBM13 ((uint32_t)0x00002000) /*!<Filter Init Mode bit 13 */
+
+/******************* Bit definition for CAN_FS1R register *******************/
+#define CAN_FS1R_FSC ((uint32_t)0x00003FFF) /*!<Filter Scale Configuration */
+#define CAN_FS1R_FSC0 ((uint32_t)0x00000001) /*!<Filter Scale Configuration bit 0 */
+#define CAN_FS1R_FSC1 ((uint32_t)0x00000002) /*!<Filter Scale Configuration bit 1 */
+#define CAN_FS1R_FSC2 ((uint32_t)0x00000004) /*!<Filter Scale Configuration bit 2 */
+#define CAN_FS1R_FSC3 ((uint32_t)0x00000008) /*!<Filter Scale Configuration bit 3 */
+#define CAN_FS1R_FSC4 ((uint32_t)0x00000010) /*!<Filter Scale Configuration bit 4 */
+#define CAN_FS1R_FSC5 ((uint32_t)0x00000020) /*!<Filter Scale Configuration bit 5 */
+#define CAN_FS1R_FSC6 ((uint32_t)0x00000040) /*!<Filter Scale Configuration bit 6 */
+#define CAN_FS1R_FSC7 ((uint32_t)0x00000080) /*!<Filter Scale Configuration bit 7 */
+#define CAN_FS1R_FSC8 ((uint32_t)0x00000100) /*!<Filter Scale Configuration bit 8 */
+#define CAN_FS1R_FSC9 ((uint32_t)0x00000200) /*!<Filter Scale Configuration bit 9 */
+#define CAN_FS1R_FSC10 ((uint32_t)0x00000400) /*!<Filter Scale Configuration bit 10 */
+#define CAN_FS1R_FSC11 ((uint32_t)0x00000800) /*!<Filter Scale Configuration bit 11 */
+#define CAN_FS1R_FSC12 ((uint32_t)0x00001000) /*!<Filter Scale Configuration bit 12 */
+#define CAN_FS1R_FSC13 ((uint32_t)0x00002000) /*!<Filter Scale Configuration bit 13 */
+
+/****************** Bit definition for CAN_FFA1R register *******************/
+#define CAN_FFA1R_FFA ((uint32_t)0x00003FFF) /*!<Filter FIFO Assignment */
+#define CAN_FFA1R_FFA0 ((uint32_t)0x00000001) /*!<Filter FIFO Assignment for Filter 0 */
+#define CAN_FFA1R_FFA1 ((uint32_t)0x00000002) /*!<Filter FIFO Assignment for Filter 1 */
+#define CAN_FFA1R_FFA2 ((uint32_t)0x00000004) /*!<Filter FIFO Assignment for Filter 2 */
+#define CAN_FFA1R_FFA3 ((uint32_t)0x00000008) /*!<Filter FIFO Assignment for Filter 3 */
+#define CAN_FFA1R_FFA4 ((uint32_t)0x00000010) /*!<Filter FIFO Assignment for Filter 4 */
+#define CAN_FFA1R_FFA5 ((uint32_t)0x00000020) /*!<Filter FIFO Assignment for Filter 5 */
+#define CAN_FFA1R_FFA6 ((uint32_t)0x00000040) /*!<Filter FIFO Assignment for Filter 6 */
+#define CAN_FFA1R_FFA7 ((uint32_t)0x00000080) /*!<Filter FIFO Assignment for Filter 7 */
+#define CAN_FFA1R_FFA8 ((uint32_t)0x00000100) /*!<Filter FIFO Assignment for Filter 8 */
+#define CAN_FFA1R_FFA9 ((uint32_t)0x00000200) /*!<Filter FIFO Assignment for Filter 9 */
+#define CAN_FFA1R_FFA10 ((uint32_t)0x00000400) /*!<Filter FIFO Assignment for Filter 10 */
+#define CAN_FFA1R_FFA11 ((uint32_t)0x00000800) /*!<Filter FIFO Assignment for Filter 11 */
+#define CAN_FFA1R_FFA12 ((uint32_t)0x00001000) /*!<Filter FIFO Assignment for Filter 12 */
+#define CAN_FFA1R_FFA13 ((uint32_t)0x00002000) /*!<Filter FIFO Assignment for Filter 13 */
+
+/******************* Bit definition for CAN_FA1R register *******************/
+#define CAN_FA1R_FACT ((uint32_t)0x00003FFF) /*!<Filter Active */
+#define CAN_FA1R_FACT0 ((uint32_t)0x00000001) /*!<Filter 0 Active */
+#define CAN_FA1R_FACT1 ((uint32_t)0x00000002) /*!<Filter 1 Active */
+#define CAN_FA1R_FACT2 ((uint32_t)0x00000004) /*!<Filter 2 Active */
+#define CAN_FA1R_FACT3 ((uint32_t)0x00000008) /*!<Filter 3 Active */
+#define CAN_FA1R_FACT4 ((uint32_t)0x00000010) /*!<Filter 4 Active */
+#define CAN_FA1R_FACT5 ((uint32_t)0x00000020) /*!<Filter 5 Active */
+#define CAN_FA1R_FACT6 ((uint32_t)0x00000040) /*!<Filter 6 Active */
+#define CAN_FA1R_FACT7 ((uint32_t)0x00000080) /*!<Filter 7 Active */
+#define CAN_FA1R_FACT8 ((uint32_t)0x00000100) /*!<Filter 8 Active */
+#define CAN_FA1R_FACT9 ((uint32_t)0x00000200) /*!<Filter 9 Active */
+#define CAN_FA1R_FACT10 ((uint32_t)0x00000400) /*!<Filter 10 Active */
+#define CAN_FA1R_FACT11 ((uint32_t)0x00000800) /*!<Filter 11 Active */
+#define CAN_FA1R_FACT12 ((uint32_t)0x00001000) /*!<Filter 12 Active */
+#define CAN_FA1R_FACT13 ((uint32_t)0x00002000) /*!<Filter 13 Active */
+
+/******************* Bit definition for CAN_F0R1 register *******************/
+#define CAN_F0R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F0R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F0R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F0R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F0R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F0R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F0R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F0R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F0R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F0R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F0R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F0R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F0R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F0R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F0R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F0R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F0R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F0R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F0R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F0R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F0R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F0R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F0R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F0R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F0R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F0R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F0R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F0R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F0R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F0R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F0R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F0R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F1R1 register *******************/
+#define CAN_F1R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F1R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F1R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F1R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F1R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F1R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F1R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F1R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F1R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F1R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F1R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F1R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F1R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F1R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F1R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F1R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F1R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F1R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F1R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F1R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F1R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F1R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F1R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F1R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F1R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F1R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F1R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F1R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F1R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F1R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F1R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F1R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F2R1 register *******************/
+#define CAN_F2R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F2R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F2R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F2R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F2R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F2R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F2R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F2R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F2R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F2R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F2R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F2R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F2R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F2R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F2R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F2R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F2R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F2R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F2R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F2R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F2R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F2R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F2R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F2R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F2R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F2R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F2R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F2R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F2R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F2R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F2R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F2R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F3R1 register *******************/
+#define CAN_F3R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F3R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F3R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F3R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F3R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F3R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F3R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F3R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F3R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F3R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F3R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F3R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F3R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F3R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F3R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F3R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F3R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F3R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F3R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F3R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F3R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F3R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F3R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F3R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F3R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F3R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F3R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F3R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F3R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F3R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F3R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F3R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F4R1 register *******************/
+#define CAN_F4R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F4R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F4R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F4R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F4R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F4R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F4R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F4R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F4R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F4R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F4R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F4R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F4R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F4R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F4R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F4R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F4R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F4R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F4R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F4R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F4R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F4R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F4R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F4R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F4R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F4R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F4R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F4R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F4R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F4R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F4R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F4R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F5R1 register *******************/
+#define CAN_F5R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F5R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F5R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F5R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F5R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F5R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F5R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F5R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F5R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F5R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F5R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F5R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F5R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F5R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F5R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F5R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F5R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F5R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F5R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F5R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F5R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F5R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F5R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F5R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F5R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F5R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F5R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F5R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F5R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F5R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F5R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F5R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F6R1 register *******************/
+#define CAN_F6R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F6R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F6R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F6R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F6R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F6R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F6R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F6R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F6R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F6R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F6R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F6R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F6R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F6R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F6R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F6R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F6R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F6R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F6R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F6R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F6R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F6R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F6R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F6R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F6R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F6R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F6R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F6R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F6R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F6R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F6R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F6R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F7R1 register *******************/
+#define CAN_F7R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F7R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F7R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F7R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F7R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F7R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F7R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F7R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F7R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F7R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F7R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F7R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F7R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F7R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F7R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F7R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F7R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F7R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F7R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F7R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F7R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F7R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F7R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F7R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F7R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F7R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F7R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F7R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F7R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F7R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F7R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F7R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F8R1 register *******************/
+#define CAN_F8R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F8R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F8R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F8R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F8R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F8R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F8R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F8R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F8R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F8R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F8R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F8R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F8R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F8R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F8R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F8R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F8R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F8R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F8R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F8R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F8R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F8R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F8R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F8R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F8R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F8R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F8R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F8R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F8R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F8R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F8R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F8R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F9R1 register *******************/
+#define CAN_F9R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F9R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F9R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F9R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F9R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F9R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F9R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F9R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F9R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F9R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F9R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F9R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F9R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F9R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F9R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F9R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F9R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F9R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F9R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F9R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F9R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F9R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F9R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F9R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F9R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F9R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F9R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F9R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F9R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F9R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F9R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F9R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F10R1 register ******************/
+#define CAN_F10R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F10R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F10R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F10R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F10R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F10R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F10R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F10R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F10R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F10R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F10R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F10R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F10R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F10R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F10R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F10R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F10R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F10R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F10R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F10R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F10R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F10R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F10R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F10R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F10R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F10R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F10R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F10R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F10R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F10R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F10R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F10R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F11R1 register ******************/
+#define CAN_F11R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F11R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F11R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F11R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F11R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F11R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F11R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F11R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F11R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F11R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F11R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F11R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F11R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F11R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F11R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F11R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F11R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F11R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F11R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F11R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F11R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F11R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F11R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F11R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F11R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F11R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F11R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F11R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F11R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F11R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F11R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F11R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F12R1 register ******************/
+#define CAN_F12R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F12R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F12R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F12R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F12R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F12R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F12R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F12R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F12R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F12R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F12R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F12R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F12R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F12R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F12R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F12R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F12R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F12R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F12R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F12R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F12R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F12R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F12R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F12R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F12R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F12R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F12R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F12R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F12R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F12R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F12R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F12R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F13R1 register ******************/
+#define CAN_F13R1_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F13R1_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F13R1_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F13R1_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F13R1_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F13R1_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F13R1_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F13R1_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F13R1_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F13R1_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F13R1_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F13R1_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F13R1_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F13R1_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F13R1_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F13R1_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F13R1_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F13R1_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F13R1_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F13R1_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F13R1_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F13R1_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F13R1_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F13R1_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F13R1_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F13R1_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F13R1_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F13R1_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F13R1_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F13R1_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F13R1_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F13R1_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F0R2 register *******************/
+#define CAN_F0R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F0R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F0R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F0R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F0R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F0R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F0R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F0R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F0R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F0R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F0R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F0R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F0R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F0R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F0R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F0R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F0R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F0R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F0R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F0R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F0R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F0R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F0R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F0R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F0R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F0R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F0R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F0R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F0R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F0R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F0R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F0R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F1R2 register *******************/
+#define CAN_F1R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F1R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F1R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F1R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F1R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F1R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F1R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F1R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F1R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F1R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F1R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F1R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F1R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F1R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F1R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F1R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F1R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F1R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F1R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F1R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F1R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F1R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F1R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F1R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F1R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F1R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F1R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F1R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F1R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F1R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F1R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F1R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F2R2 register *******************/
+#define CAN_F2R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F2R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F2R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F2R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F2R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F2R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F2R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F2R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F2R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F2R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F2R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F2R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F2R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F2R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F2R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F2R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F2R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F2R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F2R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F2R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F2R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F2R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F2R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F2R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F2R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F2R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F2R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F2R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F2R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F2R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F2R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F2R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F3R2 register *******************/
+#define CAN_F3R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F3R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F3R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F3R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F3R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F3R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F3R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F3R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F3R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F3R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F3R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F3R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F3R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F3R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F3R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F3R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F3R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F3R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F3R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F3R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F3R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F3R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F3R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F3R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F3R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F3R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F3R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F3R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F3R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F3R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F3R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F3R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F4R2 register *******************/
+#define CAN_F4R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F4R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F4R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F4R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F4R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F4R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F4R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F4R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F4R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F4R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F4R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F4R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F4R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F4R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F4R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F4R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F4R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F4R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F4R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F4R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F4R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F4R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F4R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F4R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F4R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F4R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F4R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F4R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F4R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F4R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F4R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F4R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F5R2 register *******************/
+#define CAN_F5R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F5R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F5R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F5R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F5R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F5R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F5R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F5R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F5R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F5R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F5R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F5R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F5R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F5R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F5R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F5R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F5R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F5R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F5R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F5R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F5R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F5R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F5R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F5R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F5R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F5R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F5R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F5R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F5R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F5R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F5R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F5R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F6R2 register *******************/
+#define CAN_F6R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F6R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F6R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F6R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F6R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F6R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F6R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F6R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F6R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F6R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F6R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F6R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F6R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F6R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F6R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F6R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F6R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F6R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F6R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F6R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F6R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F6R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F6R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F6R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F6R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F6R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F6R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F6R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F6R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F6R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F6R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F6R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F7R2 register *******************/
+#define CAN_F7R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F7R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F7R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F7R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F7R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F7R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F7R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F7R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F7R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F7R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F7R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F7R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F7R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F7R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F7R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F7R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F7R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F7R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F7R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F7R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F7R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F7R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F7R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F7R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F7R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F7R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F7R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F7R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F7R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F7R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F7R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F7R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F8R2 register *******************/
+#define CAN_F8R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F8R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F8R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F8R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F8R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F8R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F8R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F8R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F8R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F8R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F8R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F8R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F8R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F8R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F8R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F8R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F8R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F8R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F8R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F8R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F8R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F8R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F8R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F8R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F8R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F8R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F8R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F8R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F8R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F8R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F8R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F8R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F9R2 register *******************/
+#define CAN_F9R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F9R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F9R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F9R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F9R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F9R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F9R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F9R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F9R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F9R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F9R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F9R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F9R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F9R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F9R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F9R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F9R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F9R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F9R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F9R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F9R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F9R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F9R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F9R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F9R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F9R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F9R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F9R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F9R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F9R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F9R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F9R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F10R2 register ******************/
+#define CAN_F10R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F10R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F10R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F10R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F10R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F10R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F10R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F10R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F10R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F10R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F10R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F10R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F10R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F10R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F10R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F10R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F10R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F10R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F10R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F10R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F10R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F10R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F10R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F10R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F10R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F10R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F10R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F10R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F10R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F10R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F10R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F10R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F11R2 register ******************/
+#define CAN_F11R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F11R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F11R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F11R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F11R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F11R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F11R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F11R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F11R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F11R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F11R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F11R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F11R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F11R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F11R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F11R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F11R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F11R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F11R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F11R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F11R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F11R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F11R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F11R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F11R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F11R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F11R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F11R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F11R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F11R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F11R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F11R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F12R2 register ******************/
+#define CAN_F12R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F12R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F12R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F12R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F12R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F12R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F12R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F12R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F12R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F12R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F12R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F12R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F12R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F12R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F12R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F12R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F12R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F12R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F12R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F12R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F12R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F12R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F12R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F12R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F12R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F12R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F12R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F12R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F12R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F12R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F12R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F12R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************* Bit definition for CAN_F13R2 register ******************/
+#define CAN_F13R2_FB0 ((uint32_t)0x00000001) /*!<Filter bit 0 */
+#define CAN_F13R2_FB1 ((uint32_t)0x00000002) /*!<Filter bit 1 */
+#define CAN_F13R2_FB2 ((uint32_t)0x00000004) /*!<Filter bit 2 */
+#define CAN_F13R2_FB3 ((uint32_t)0x00000008) /*!<Filter bit 3 */
+#define CAN_F13R2_FB4 ((uint32_t)0x00000010) /*!<Filter bit 4 */
+#define CAN_F13R2_FB5 ((uint32_t)0x00000020) /*!<Filter bit 5 */
+#define CAN_F13R2_FB6 ((uint32_t)0x00000040) /*!<Filter bit 6 */
+#define CAN_F13R2_FB7 ((uint32_t)0x00000080) /*!<Filter bit 7 */
+#define CAN_F13R2_FB8 ((uint32_t)0x00000100) /*!<Filter bit 8 */
+#define CAN_F13R2_FB9 ((uint32_t)0x00000200) /*!<Filter bit 9 */
+#define CAN_F13R2_FB10 ((uint32_t)0x00000400) /*!<Filter bit 10 */
+#define CAN_F13R2_FB11 ((uint32_t)0x00000800) /*!<Filter bit 11 */
+#define CAN_F13R2_FB12 ((uint32_t)0x00001000) /*!<Filter bit 12 */
+#define CAN_F13R2_FB13 ((uint32_t)0x00002000) /*!<Filter bit 13 */
+#define CAN_F13R2_FB14 ((uint32_t)0x00004000) /*!<Filter bit 14 */
+#define CAN_F13R2_FB15 ((uint32_t)0x00008000) /*!<Filter bit 15 */
+#define CAN_F13R2_FB16 ((uint32_t)0x00010000) /*!<Filter bit 16 */
+#define CAN_F13R2_FB17 ((uint32_t)0x00020000) /*!<Filter bit 17 */
+#define CAN_F13R2_FB18 ((uint32_t)0x00040000) /*!<Filter bit 18 */
+#define CAN_F13R2_FB19 ((uint32_t)0x00080000) /*!<Filter bit 19 */
+#define CAN_F13R2_FB20 ((uint32_t)0x00100000) /*!<Filter bit 20 */
+#define CAN_F13R2_FB21 ((uint32_t)0x00200000) /*!<Filter bit 21 */
+#define CAN_F13R2_FB22 ((uint32_t)0x00400000) /*!<Filter bit 22 */
+#define CAN_F13R2_FB23 ((uint32_t)0x00800000) /*!<Filter bit 23 */
+#define CAN_F13R2_FB24 ((uint32_t)0x01000000) /*!<Filter bit 24 */
+#define CAN_F13R2_FB25 ((uint32_t)0x02000000) /*!<Filter bit 25 */
+#define CAN_F13R2_FB26 ((uint32_t)0x04000000) /*!<Filter bit 26 */
+#define CAN_F13R2_FB27 ((uint32_t)0x08000000) /*!<Filter bit 27 */
+#define CAN_F13R2_FB28 ((uint32_t)0x10000000) /*!<Filter bit 28 */
+#define CAN_F13R2_FB29 ((uint32_t)0x20000000) /*!<Filter bit 29 */
+#define CAN_F13R2_FB30 ((uint32_t)0x40000000) /*!<Filter bit 30 */
+#define CAN_F13R2_FB31 ((uint32_t)0x80000000) /*!<Filter bit 31 */
+
+/******************************************************************************/
+/* */
+/* CRC calculation unit (CRC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for CRC_DR register *********************/
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+
+/******************* Bit definition for CRC_IDR register ********************/
+#define CRC_IDR_IDR ((uint32_t)0xFF) /*!< General-purpose 8-bit data register bits */
+
+/******************** Bit definition for CRC_CR register ********************/
+#define CRC_CR_RESET ((uint32_t)0x00000001) /*!< RESET the CRC computation unit bit */
+#define CRC_CR_POLYSIZE ((uint32_t)0x00000018) /*!< Polynomial size bits */
+#define CRC_CR_POLYSIZE_0 ((uint32_t)0x00000008) /*!< Polynomial size bit 0 */
+#define CRC_CR_POLYSIZE_1 ((uint32_t)0x00000010) /*!< Polynomial size bit 1 */
+#define CRC_CR_REV_IN ((uint32_t)0x00000060) /*!< REV_IN Reverse Input Data bits */
+#define CRC_CR_REV_IN_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define CRC_CR_REV_IN_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define CRC_CR_REV_OUT ((uint32_t)0x00000080) /*!< REV_OUT Reverse Output Data bits */
+
+/******************* Bit definition for CRC_INIT register *******************/
+#define CRC_INIT_INIT ((uint32_t)0xFFFFFFFF) /*!< Initial CRC value bits */
+
+/******************* Bit definition for CRC_POL register ********************/
+#define CRC_POL_POL ((uint32_t)0xFFFFFFFF) /*!< Coefficients of the polynomial */
+
+/******************************************************************************/
+/* */
+/* Digital to Analog Converter (DAC) */
+/* */
+/******************************************************************************/
+/******************** Bit definition for DAC_CR register ********************/
+#define DAC_CR_EN1 ((uint32_t)0x00000001) /*!< DAC channel1 enable */
+#define DAC_CR_BOFF1 ((uint32_t)0x00000002) /*!< DAC channel1 output buffer disable */
+#define DAC_CR_TEN1 ((uint32_t)0x00000004) /*!< DAC channel1 Trigger enable */
+
+#define DAC_CR_TSEL1 ((uint32_t)0x00000038) /*!< TSEL1[2:0] (DAC channel1 Trigger selection) */
+#define DAC_CR_TSEL1_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define DAC_CR_TSEL1_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define DAC_CR_TSEL1_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+
+#define DAC_CR_WAVE1 ((uint32_t)0x000000C0) /*!< WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */
+#define DAC_CR_WAVE1_0 ((uint32_t)0x00000040) /*!< Bit 0 */
+#define DAC_CR_WAVE1_1 ((uint32_t)0x00000080) /*!< Bit 1 */
+
+#define DAC_CR_MAMP1 ((uint32_t)0x00000F00) /*!< MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */
+#define DAC_CR_MAMP1_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DAC_CR_MAMP1_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define DAC_CR_MAMP1_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define DAC_CR_MAMP1_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+
+#define DAC_CR_DMAEN1 ((uint32_t)0x00001000) /*!< DAC channel1 DMA enable */
+#define DAC_CR_DMAUDRIE1 ((uint32_t)0x00002000) /*!< DAC channel1 DMA underrun IT enable */
+#define DAC_CR_EN2 ((uint32_t)0x00010000) /*!< DAC channel2 enable */
+#define DAC_CR_BOFF2 ((uint32_t)0x00020000) /*!< DAC channel2 output buffer disable */
+#define DAC_CR_TEN2 ((uint32_t)0x00040000) /*!< DAC channel2 Trigger enable */
+
+#define DAC_CR_TSEL2 ((uint32_t)0x00380000) /*!< TSEL2[2:0] (DAC channel2 Trigger selection) */
+#define DAC_CR_TSEL2_0 ((uint32_t)0x00080000) /*!< Bit 0 */
+#define DAC_CR_TSEL2_1 ((uint32_t)0x00100000) /*!< Bit 1 */
+#define DAC_CR_TSEL2_2 ((uint32_t)0x00200000) /*!< Bit 2 */
+
+#define DAC_CR_WAVE2 ((uint32_t)0x00C00000) /*!< WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */
+#define DAC_CR_WAVE2_0 ((uint32_t)0x00400000) /*!< Bit 0 */
+#define DAC_CR_WAVE2_1 ((uint32_t)0x00800000) /*!< Bit 1 */
+
+#define DAC_CR_MAMP2 ((uint32_t)0x0F000000) /*!< MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */
+#define DAC_CR_MAMP2_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define DAC_CR_MAMP2_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define DAC_CR_MAMP2_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define DAC_CR_MAMP2_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define DAC_CR_DMAEN2 ((uint32_t)0x10000000) /*!< DAC channel2 DMA enabled */
+#define DAC_CR_DMAUDRIE2 ((uint32_t)0x20000000) /*!< DAC channel2 DMA underrun IT enable */
+
+/***************** Bit definition for DAC_SWTRIGR register ******************/
+#define DAC_SWTRIGR_SWTRIG1 ((uint32_t)0x00000001) /*!< DAC channel1 software trigger */
+#define DAC_SWTRIGR_SWTRIG2 ((uint32_t)0x00000002) /*!< DAC channel2 software trigger */
+
+/***************** Bit definition for DAC_DHR12R1 register ******************/
+#define DAC_DHR12R1_DACC1DHR ((uint32_t)0x00000FFF) /*!< DAC channel1 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L1 register ******************/
+#define DAC_DHR12L1_DACC1DHR ((uint32_t)0x0000FFF0) /*!< DAC channel1 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R1 register ******************/
+#define DAC_DHR8R1_DACC1DHR ((uint32_t)0x000000FF) /*!< DAC channel1 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12R2 register ******************/
+#define DAC_DHR12R2_DACC2DHR ((uint32_t)0x00000FFF) /*!< DAC channel2 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12L2 register ******************/
+#define DAC_DHR12L2_DACC2DHR ((uint32_t)0x0000FFF0) /*!< DAC channel2 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8R2 register ******************/
+#define DAC_DHR8R2_DACC2DHR ((uint32_t)0x000000FF) /*!< DAC channel2 8-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12RD register ******************/
+#define DAC_DHR12RD_DACC1DHR ((uint32_t)0x00000FFF) /*!< DAC channel1 12-bit Right aligned data */
+#define DAC_DHR12RD_DACC2DHR ((uint32_t)0x0FFF0000) /*!< DAC channel2 12-bit Right aligned data */
+
+/***************** Bit definition for DAC_DHR12LD register ******************/
+#define DAC_DHR12LD_DACC1DHR ((uint32_t)0x0000FFF0) /*!< DAC channel1 12-bit Left aligned data */
+#define DAC_DHR12LD_DACC2DHR ((uint32_t)0xFFF00000) /*!< DAC channel2 12-bit Left aligned data */
+
+/****************** Bit definition for DAC_DHR8RD register ******************/
+#define DAC_DHR8RD_DACC1DHR ((uint32_t)0x000000FF) /*!< DAC channel1 8-bit Right aligned data */
+#define DAC_DHR8RD_DACC2DHR ((uint32_t)0x0000FF00) /*!< DAC channel2 8-bit Right aligned data */
+
+/******************* Bit definition for DAC_DOR1 register *******************/
+#define DAC_DOR1_DACC1DOR ((uint32_t)0x00000FFF) /*!< DAC channel1 data output */
+
+/******************* Bit definition for DAC_DOR2 register *******************/
+#define DAC_DOR2_DACC2DOR ((uint32_t)0x00000FFF) /*!< DAC channel2 data output */
+
+/******************** Bit definition for DAC_SR register ********************/
+#define DAC_SR_DMAUDR1 ((uint32_t)0x00002000) /*!< DAC channel1 DMA underrun flag */
+#define DAC_SR_DMAUDR2 ((uint32_t)0x20000000) /*!< DAC channel2 DMA underrun flag */
+
+/******************************************************************************/
+/* */
+/* Debug MCU (DBGMCU) */
+/* */
+/******************************************************************************/
+/******************** Bit definition for DBGMCU_IDCODE register *************/
+#define DBGMCU_IDCODE_DEV_ID ((uint32_t)0x00000FFF)
+#define DBGMCU_IDCODE_REV_ID ((uint32_t)0xFFFF0000)
+
+/******************** Bit definition for DBGMCU_CR register *****************/
+#define DBGMCU_CR_DBG_SLEEP ((uint32_t)0x00000001)
+#define DBGMCU_CR_DBG_STOP ((uint32_t)0x00000002)
+#define DBGMCU_CR_DBG_STANDBY ((uint32_t)0x00000004)
+#define DBGMCU_CR_TRACE_IOEN ((uint32_t)0x00000020)
+
+#define DBGMCU_CR_TRACE_MODE ((uint32_t)0x000000C0)
+#define DBGMCU_CR_TRACE_MODE_0 ((uint32_t)0x00000040)/*!<Bit 0 */
+#define DBGMCU_CR_TRACE_MODE_1 ((uint32_t)0x00000080)/*!<Bit 1 */
+
+/******************** Bit definition for DBGMCU_APB1_FZ register ************/
+#define DBGMCU_APB1_FZ_DBG_TIM2_STOP ((uint32_t)0x00000001)
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002)
+#define DBGMCU_APB1_FZ_DBG_TIM4_STOP ((uint32_t)0x00000004)
+#define DBGMCU_APB1_FZ_DBG_TIM6_STOP ((uint32_t)0x00000010)
+#define DBGMCU_APB1_FZ_DBG_TIM7_STOP ((uint32_t)0x00000020)
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400)
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800)
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000)
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000)
+#define DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00400000)
+#define DBGMCU_APB1_FZ_DBG_CAN_STOP ((uint32_t)0x02000000)
+#define DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT ((uint32_t)0x04000000)
+
+/******************** Bit definition for DBGMCU_APB2_FZ register ************/
+#define DBGMCU_APB2_FZ_DBG_TIM1_STOP ((uint32_t)0x00000001)
+#define DBGMCU_APB2_FZ_DBG_TIM8_STOP ((uint32_t)0x00000002)
+#define DBGMCU_APB2_FZ_DBG_TIM15_STOP ((uint32_t)0x00000004)
+#define DBGMCU_APB2_FZ_DBG_TIM16_STOP ((uint32_t)0x00000008)
+#define DBGMCU_APB2_FZ_DBG_TIM17_STOP ((uint32_t)0x00000010)
+#define DBGMCU_APB2_FZ_DBG_TIM20_STOP ((uint32_t)0x00000020)
+
+/******************************************************************************/
+/* */
+/* DMA Controller (DMA) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for DMA_ISR register ********************/
+#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */
+#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */
+#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */
+#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */
+#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */
+#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */
+#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */
+#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */
+#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */
+#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */
+#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */
+#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */
+#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */
+#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */
+#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */
+#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */
+#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */
+#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */
+#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */
+#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */
+#define DMA_ISR_GIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt flag */
+#define DMA_ISR_TCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete flag */
+#define DMA_ISR_HTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer flag */
+#define DMA_ISR_TEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error flag */
+#define DMA_ISR_GIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt flag */
+#define DMA_ISR_TCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete flag */
+#define DMA_ISR_HTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer flag */
+#define DMA_ISR_TEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error flag */
+
+/******************* Bit definition for DMA_IFCR register *******************/
+#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clear */
+#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */
+#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */
+#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */
+#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */
+#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */
+#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */
+#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */
+#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */
+#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */
+#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */
+#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */
+#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */
+#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */
+#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */
+#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */
+#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */
+#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */
+#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */
+#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */
+#define DMA_IFCR_CGIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt clear */
+#define DMA_IFCR_CTCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete clear */
+#define DMA_IFCR_CHTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer clear */
+#define DMA_IFCR_CTEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error clear */
+#define DMA_IFCR_CGIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt clear */
+#define DMA_IFCR_CTCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete clear */
+#define DMA_IFCR_CHTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer clear */
+#define DMA_IFCR_CTEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error clear */
+
+/******************* Bit definition for DMA_CCR register ********************/
+#define DMA_CCR_EN ((uint32_t)0x00000001) /*!< Channel enable */
+#define DMA_CCR_TCIE ((uint32_t)0x00000002) /*!< Transfer complete interrupt enable */
+#define DMA_CCR_HTIE ((uint32_t)0x00000004) /*!< Half Transfer interrupt enable */
+#define DMA_CCR_TEIE ((uint32_t)0x00000008) /*!< Transfer error interrupt enable */
+#define DMA_CCR_DIR ((uint32_t)0x00000010) /*!< Data transfer direction */
+#define DMA_CCR_CIRC ((uint32_t)0x00000020) /*!< Circular mode */
+#define DMA_CCR_PINC ((uint32_t)0x00000040) /*!< Peripheral increment mode */
+#define DMA_CCR_MINC ((uint32_t)0x00000080) /*!< Memory increment mode */
+
+#define DMA_CCR_PSIZE ((uint32_t)0x00000300) /*!< PSIZE[1:0] bits (Peripheral size) */
+#define DMA_CCR_PSIZE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define DMA_CCR_PSIZE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+#define DMA_CCR_MSIZE ((uint32_t)0x00000C00) /*!< MSIZE[1:0] bits (Memory size) */
+#define DMA_CCR_MSIZE_0 ((uint32_t)0x00000400) /*!< Bit 0 */
+#define DMA_CCR_MSIZE_1 ((uint32_t)0x00000800) /*!< Bit 1 */
+
+#define DMA_CCR_PL ((uint32_t)0x00003000) /*!< PL[1:0] bits(Channel Priority level)*/
+#define DMA_CCR_PL_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define DMA_CCR_PL_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+
+#define DMA_CCR_MEM2MEM ((uint32_t)0x00004000) /*!< Memory to memory mode */
+
+/****************** Bit definition for DMA_CNDTR register *******************/
+#define DMA_CNDTR_NDT ((uint32_t)0x0000FFFF) /*!< Number of data to Transfer */
+
+/****************** Bit definition for DMA_CPAR register ********************/
+#define DMA_CPAR_PA ((uint32_t)0xFFFFFFFF) /*!< Peripheral Address */
+
+/****************** Bit definition for DMA_CMAR register ********************/
+#define DMA_CMAR_MA ((uint32_t)0xFFFFFFFF) /*!< Memory Address */
+
+/******************************************************************************/
+/* */
+/* External Interrupt/Event Controller (EXTI) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for EXTI_IMR1/EXTI_IMR2 register ********/
+#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */
+#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */
+#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */
+#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */
+#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */
+#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */
+#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */
+#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */
+#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */
+#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */
+#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */
+#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */
+#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */
+#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */
+#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */
+#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */
+#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */
+#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */
+#define EXTI_IMR_MR18 ((uint32_t)0x00040000) /*!< Interrupt Mask on line 18 */
+#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */
+#define EXTI_IMR_MR20 ((uint32_t)0x00100000) /*!< Interrupt Mask on line 20 */
+#define EXTI_IMR_MR21 ((uint32_t)0x00200000) /*!< Interrupt Mask on line 21 */
+#define EXTI_IMR_MR22 ((uint32_t)0x00400000) /*!< Interrupt Mask on line 22 */
+#define EXTI_IMR_MR23 ((uint32_t)0x00800000) /*!< Interrupt Mask on line 23 */
+#define EXTI_IMR_MR24 ((uint32_t)0x01000000) /*!< Interrupt Mask on line 24 */
+#define EXTI_IMR_MR25 ((uint32_t)0x02000000) /*!< Interrupt Mask on line 25 */
+#define EXTI_IMR_MR26 ((uint32_t)0x04000000) /*!< Interrupt Mask on line 26 */
+#define EXTI_IMR_MR27 ((uint32_t)0x08000000) /*!< Interrupt Mask on line 27 */
+#define EXTI_IMR_MR28 ((uint32_t)0x10000000) /*!< Interrupt Mask on line 28 */
+
+/******************* Bit definition for EXTI_EMR1/EXTI_EMR2 register ********/
+#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
+#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */
+#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */
+#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */
+#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */
+#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */
+#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */
+#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */
+#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */
+#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */
+#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */
+#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */
+#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */
+#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */
+#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */
+#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */
+#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */
+#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */
+#define EXTI_EMR_MR18 ((uint32_t)0x00040000) /*!< Event Mask on line 18 */
+#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */
+#define EXTI_EMR_MR20 ((uint32_t)0x00100000) /*!< Event Mask on line 20 */
+#define EXTI_EMR_MR21 ((uint32_t)0x00200000) /*!< Event Mask on line 21 */
+#define EXTI_EMR_MR22 ((uint32_t)0x00400000) /*!< Event Mask on line 22 */
+#define EXTI_EMR_MR23 ((uint32_t)0x00800000) /*!< Event Mask on line 23 */
+#define EXTI_EMR_MR24 ((uint32_t)0x01000000) /*!< Event Mask on line 24 */
+#define EXTI_EMR_MR25 ((uint32_t)0x02000000) /*!< Event Mask on line 25 */
+#define EXTI_EMR_MR26 ((uint32_t)0x04000000) /*!< Event Mask on line 26 */
+#define EXTI_EMR_MR27 ((uint32_t)0x08000000) /*!< Event Mask on line 27 */
+#define EXTI_EMR_MR28 ((uint32_t)0x10000000) /*!< Event Mask on line 28 */
+
+/****************** Bit definition for EXTI_RTSR1/EXTI_RTSR2 register *******/
+#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
+#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */
+#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */
+#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */
+#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */
+#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */
+#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */
+#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */
+#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */
+#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */
+#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */
+#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */
+#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */
+#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */
+#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */
+#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */
+#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */
+#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */
+#define EXTI_RTSR_TR18 ((uint32_t)0x00040000) /*!< Rising trigger event configuration bit of line 18 */
+#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */
+#define EXTI_RTSR_TR20 ((uint32_t)0x00100000) /*!< Rising trigger event configuration bit of line 20 */
+#define EXTI_RTSR_TR21 ((uint32_t)0x00200000) /*!< Rising trigger event configuration bit of line 21 */
+#define EXTI_RTSR_TR22 ((uint32_t)0x00400000) /*!< Rising trigger event configuration bit of line 22 */
+#define EXTI_RTSR_TR23 ((uint32_t)0x00800000) /*!< Rising trigger event configuration bit of line 23 */
+#define EXTI_RTSR_TR24 ((uint32_t)0x01000000) /*!< Rising trigger event configuration bit of line 24 */
+#define EXTI_RTSR_TR25 ((uint32_t)0x02000000) /*!< Rising trigger event configuration bit of line 25 */
+#define EXTI_RTSR_TR26 ((uint32_t)0x04000000) /*!< Rising trigger event configuration bit of line 26 */
+#define EXTI_RTSR_TR27 ((uint32_t)0x08000000) /*!< Rising trigger event configuration bit of line 27 */
+#define EXTI_RTSR_TR28 ((uint32_t)0x10000000) /*!< Rising trigger event configuration bit of line 28 */
+
+/****************** Bit definition for EXTI_FTSR1/EXTI_FTSR2 register *******/
+#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
+#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */
+#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */
+#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */
+#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */
+#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */
+#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */
+#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */
+#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */
+#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */
+#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */
+#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */
+#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */
+#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */
+#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */
+#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */
+#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */
+#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */
+#define EXTI_FTSR_TR18 ((uint32_t)0x00040000) /*!< Falling trigger event configuration bit of line 18 */
+#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */
+#define EXTI_FTSR_TR20 ((uint32_t)0x00100000) /*!< Falling trigger event configuration bit of line 20 */
+#define EXTI_FTSR_TR21 ((uint32_t)0x00200000) /*!< Falling trigger event configuration bit of line 21 */
+#define EXTI_FTSR_TR22 ((uint32_t)0x00400000) /*!< Falling trigger event configuration bit of line 22 */
+#define EXTI_FTSR_TR23 ((uint32_t)0x00800000) /*!< Falling trigger event configuration bit of line 23 */
+#define EXTI_FTSR_TR24 ((uint32_t)0x01000000) /*!< Falling trigger event configuration bit of line 24 */
+#define EXTI_FTSR_TR25 ((uint32_t)0x02000000) /*!< Falling trigger event configuration bit of line 25 */
+#define EXTI_FTSR_TR26 ((uint32_t)0x04000000) /*!< Falling trigger event configuration bit of line 26 */
+#define EXTI_FTSR_TR27 ((uint32_t)0x08000000) /*!< Falling trigger event configuration bit of line 27 */
+#define EXTI_FTSR_TR28 ((uint32_t)0x10000000) /*!< Falling trigger event configuration bit of line 28 */
+
+/****************** Bit definition for EXTI_SWIER1/EXTI_SWIER2 register *****/
+#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
+#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */
+#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */
+#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */
+#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */
+#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */
+#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */
+#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */
+#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */
+#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */
+#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */
+#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */
+#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */
+#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */
+#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */
+#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */
+#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */
+#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */
+#define EXTI_SWIER_SWIER18 ((uint32_t)0x00040000) /*!< Software Interrupt on line 18 */
+#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */
+#define EXTI_SWIER_SWIER20 ((uint32_t)0x00100000) /*!< Software Interrupt on line 20 */
+#define EXTI_SWIER_SWIER21 ((uint32_t)0x00200000) /*!< Software Interrupt on line 21 */
+#define EXTI_SWIER_SWIER22 ((uint32_t)0x00400000) /*!< Software Interrupt on line 22 */
+#define EXTI_SWIER_SWIER23 ((uint32_t)0x00800000) /*!< Software Interrupt on line 23 */
+#define EXTI_SWIER_SWIER24 ((uint32_t)0x01000000) /*!< Software Interrupt on line 24 */
+#define EXTI_SWIER_SWIER25 ((uint32_t)0x02000000) /*!< Software Interrupt on line 25 */
+#define EXTI_SWIER_SWIER26 ((uint32_t)0x04000000) /*!< Software Interrupt on line 26 */
+#define EXTI_SWIER_SWIER27 ((uint32_t)0x08000000) /*!< Software Interrupt on line 27 */
+#define EXTI_SWIER_SWIER28 ((uint32_t)0x10000000) /*!< Software Interrupt on line 28 */
+
+/******************* Bit definition for EXTI_PR1/EXTI_PR2 register **********/
+#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit for line 0 */
+#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit for line 1 */
+#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit for line 2 */
+#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit for line 3 */
+#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit for line 4 */
+#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit for line 5 */
+#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit for line 6 */
+#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit for line 7 */
+#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit for line 8 */
+#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit for line 9 */
+#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit for line 10 */
+#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit for line 11 */
+#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit for line 12 */
+#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit for line 13 */
+#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit for line 14 */
+#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit for line 15 */
+#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit for line 16 */
+#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit for line 17 */
+#define EXTI_PR_PR18 ((uint32_t)0x00040000) /*!< Pending bit for line 18 */
+#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit for line 19 */
+#define EXTI_PR_PR20 ((uint32_t)0x00100000) /*!< Pending bit for line 20 */
+#define EXTI_PR_PR21 ((uint32_t)0x00200000) /*!< Pending bit for line 21 */
+#define EXTI_PR_PR22 ((uint32_t)0x00400000) /*!< Pending bit for line 22 */
+#define EXTI_PR_PR23 ((uint32_t)0x00800000) /*!< Pending bit for line 23 */
+#define EXTI_PR_PR24 ((uint32_t)0x01000000) /*!< Pending bit for line 24 */
+#define EXTI_PR_PR25 ((uint32_t)0x02000000) /*!< Pending bit for line 25 */
+#define EXTI_PR_PR26 ((uint32_t)0x04000000) /*!< Pending bit for line 26 */
+#define EXTI_PR_PR27 ((uint32_t)0x08000000) /*!< Pending bit for line 27 */
+#define EXTI_PR_PR28 ((uint32_t)0x10000000) /*!< Pending bit for line 28 */
+
+/******************************************************************************/
+/* */
+/* FLASH */
+/* */
+/******************************************************************************/
+/******************* Bit definition for FLASH_ACR register ******************/
+#define FLASH_ACR_LATENCY ((uint32_t)0x00000007) /*!< LATENCY[2:0] bits (Latency) */
+#define FLASH_ACR_LATENCY_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define FLASH_ACR_LATENCY_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define FLASH_ACR_LATENCY_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+#define FLASH_ACR_HLFCYA ((uint32_t)0x00000008) /*!< Flash Half Cycle Access Enable */
+#define FLASH_ACR_PRFTBE ((uint32_t)0x00000010) /*!< Prefetch Buffer Enable */
+#define FLASH_ACR_PRFTBS ((uint32_t)0x00000020) /*!< Prefetch Buffer Status */
+
+/****************** Bit definition for FLASH_KEYR register ******************/
+#define FLASH_KEYR_FKEYR ((uint32_t)0xFFFFFFFF) /*!< FPEC Key */
+
+#define RDP_KEY ((uint32_t)0x000000A5) /*!< RDP Key */
+#define FLASH_KEY1 ((uint32_t)0x45670123) /*!< FPEC Key1 */
+#define FLASH_KEY2 ((uint32_t)0xCDEF89AB) /*!< FPEC Key2 */
+
+/***************** Bit definition for FLASH_OPTKEYR register ****************/
+#define FLASH_OPTKEYR_OPTKEYR ((uint32_t)0xFFFFFFFF) /*!< Option Byte Key */
+
+#define FLASH_OPTKEY1 FLASH_KEY1 /*!< Option Byte Key1 */
+#define FLASH_OPTKEY2 FLASH_KEY2 /*!< Option Byte Key2 */
+
+/****************** Bit definition for FLASH_SR register *******************/
+#define FLASH_SR_BSY ((uint32_t)0x00000001) /*!< Busy */
+#define FLASH_SR_PGERR ((uint32_t)0x00000004) /*!< Programming Error */
+#define FLASH_SR_WRPERR ((uint32_t)0x00000010) /*!< Write Protection Error */
+#define FLASH_SR_EOP ((uint32_t)0x00000020) /*!< End of operation */
+
+/******************* Bit definition for FLASH_CR register *******************/
+#define FLASH_CR_PG ((uint32_t)0x00000001) /*!< Programming */
+#define FLASH_CR_PER ((uint32_t)0x00000002) /*!< Page Erase */
+#define FLASH_CR_MER ((uint32_t)0x00000004) /*!< Mass Erase */
+#define FLASH_CR_OPTPG ((uint32_t)0x00000010) /*!< Option Byte Programming */
+#define FLASH_CR_OPTER ((uint32_t)0x00000020) /*!< Option Byte Erase */
+#define FLASH_CR_STRT ((uint32_t)0x00000040) /*!< Start */
+#define FLASH_CR_LOCK ((uint32_t)0x00000080) /*!< Lock */
+#define FLASH_CR_OPTWRE ((uint32_t)0x00000200) /*!< Option Bytes Write Enable */
+#define FLASH_CR_ERRIE ((uint32_t)0x00000400) /*!< Error Interrupt Enable */
+#define FLASH_CR_EOPIE ((uint32_t)0x00001000) /*!< End of operation interrupt enable */
+#define FLASH_CR_OBL_LAUNCH ((uint32_t)0x00002000) /*!< OptionBytes Loader Launch */
+
+/******************* Bit definition for FLASH_AR register *******************/
+#define FLASH_AR_FAR ((uint32_t)0xFFFFFFFF) /*!< Flash Address */
+
+/****************** Bit definition for FLASH_OBR register *******************/
+#define FLASH_OBR_OPTERR ((uint32_t)0x00000001) /*!< Option Byte Error */
+#define FLASH_OBR_RDPRT ((uint32_t)0x00000006) /*!< Read protection */
+#define FLASH_OBR_RDPRT_1 ((uint32_t)0x00000002) /*!< Read protection Level 1 */
+#define FLASH_OBR_RDPRT_2 ((uint32_t)0x00000006) /*!< Read protection Level 2 */
+
+#define FLASH_OBR_USER ((uint32_t)0x00007700) /*!< User Option Bytes */
+#define FLASH_OBR_IWDG_SW ((uint32_t)0x00000100) /*!< IWDG SW */
+#define FLASH_OBR_nRST_STOP ((uint32_t)0x00000200) /*!< nRST_STOP */
+#define FLASH_OBR_nRST_STDBY ((uint32_t)0x00000400) /*!< nRST_STDBY */
+#define FLASH_OBR_nBOOT1 ((uint32_t)0x00001000) /*!< nBOOT1 */
+#define FLASH_OBR_VDDA_MONITOR ((uint32_t)0x00002000) /*!< VDDA_MONITOR */
+#define FLASH_OBR_SRAM_PE ((uint32_t)0x00004000) /*!< SRAM_PE */
+
+/****************** Bit definition for FLASH_WRPR register ******************/
+#define FLASH_WRPR_WRP ((uint32_t)0xFFFFFFFF) /*!< Write Protect */
+
+/*----------------------------------------------------------------------------*/
+
+/****************** Bit definition for OB_RDP register **********************/
+#define OB_RDP_RDP ((uint32_t)0x000000FF) /*!< Read protection option byte */
+#define OB_RDP_nRDP ((uint32_t)0x0000FF00) /*!< Read protection complemented option byte */
+
+/****************** Bit definition for OB_USER register *********************/
+#define OB_USER_USER ((uint32_t)0x00FF0000) /*!< User option byte */
+#define OB_USER_nUSER ((uint32_t)0xFF000000) /*!< User complemented option byte */
+
+/****************** Bit definition for FLASH_WRP0 register ******************/
+#define OB_WRP0_WRP0 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP0_nWRP0 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for FLASH_WRP1 register ******************/
+#define OB_WRP1_WRP1 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP1_nWRP1 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for FLASH_WRP2 register ******************/
+#define OB_WRP2_WRP2 ((uint32_t)0x000000FF) /*!< Flash memory write protection option bytes */
+#define OB_WRP2_nWRP2 ((uint32_t)0x0000FF00) /*!< Flash memory write protection complemented option bytes */
+
+/****************** Bit definition for FLASH_WRP3 register ******************/
+#define OB_WRP3_WRP3 ((uint32_t)0x00FF0000) /*!< Flash memory write protection option bytes */
+#define OB_WRP3_nWRP3 ((uint32_t)0xFF000000) /*!< Flash memory write protection complemented option bytes */
+
+
+/******************************************************************************/
+/* */
+/* Flexible Memory Controller */
+/* */
+/******************************************************************************/
+/****************** Bit definition for FMC_BCR1 register *******************/
+#define FMC_BCR1_MBKEN ((uint32_t)0x00000001) /*!<Memory bank enable bit */
+#define FMC_BCR1_MUXEN ((uint32_t)0x00000002) /*!<Address/data multiplexing enable bit */
+
+#define FMC_BCR1_MTYP ((uint32_t)0x0000000C) /*!<MTYP[1:0] bits (Memory type) */
+#define FMC_BCR1_MTYP_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define FMC_BCR1_MTYP_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define FMC_BCR1_MWID ((uint32_t)0x00000030) /*!<MWID[1:0] bits (Memory data bus width) */
+#define FMC_BCR1_MWID_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FMC_BCR1_MWID_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define FMC_BCR1_FACCEN ((uint32_t)0x00000040) /*!<Flash access enable */
+#define FMC_BCR1_BURSTEN ((uint32_t)0x00000100) /*!<Burst enable bit */
+#define FMC_BCR1_WAITPOL ((uint32_t)0x00000200) /*!<Wait signal polarity bit */
+#define FMC_BCR1_WRAPMOD ((uint32_t)0x00000400) /*!<Wrapped burst mode support */
+#define FMC_BCR1_WAITCFG ((uint32_t)0x00000800) /*!<Wait timing configuration */
+#define FMC_BCR1_WREN ((uint32_t)0x00001000) /*!<Write enable bit */
+#define FMC_BCR1_WAITEN ((uint32_t)0x00002000) /*!<Wait enable bit */
+#define FMC_BCR1_EXTMOD ((uint32_t)0x00004000) /*!<Extended mode enable */
+#define FMC_BCR1_ASYNCWAIT ((uint32_t)0x00008000) /*!<Asynchronous wait */
+#define FMC_BCR1_CBURSTRW ((uint32_t)0x00080000) /*!<Write burst enable */
+#define FMC_BCR1_CCLKEN ((uint32_t)0x00100000) /*!<Continous clock enable */
+
+/****************** Bit definition for FMC_BCR2 register *******************/
+#define FMC_BCR2_MBKEN ((uint32_t)0x00000001) /*!<Memory bank enable bit */
+#define FMC_BCR2_MUXEN ((uint32_t)0x00000002) /*!<Address/data multiplexing enable bit */
+
+#define FMC_BCR2_MTYP ((uint32_t)0x0000000C) /*!<MTYP[1:0] bits (Memory type) */
+#define FMC_BCR2_MTYP_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define FMC_BCR2_MTYP_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define FMC_BCR2_MWID ((uint32_t)0x00000030) /*!<MWID[1:0] bits (Memory data bus width) */
+#define FMC_BCR2_MWID_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FMC_BCR2_MWID_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define FMC_BCR2_FACCEN ((uint32_t)0x00000040) /*!<Flash access enable */
+#define FMC_BCR2_BURSTEN ((uint32_t)0x00000100) /*!<Burst enable bit */
+#define FMC_BCR2_WAITPOL ((uint32_t)0x00000200) /*!<Wait signal polarity bit */
+#define FMC_BCR2_WRAPMOD ((uint32_t)0x00000400) /*!<Wrapped burst mode support */
+#define FMC_BCR2_WAITCFG ((uint32_t)0x00000800) /*!<Wait timing configuration */
+#define FMC_BCR2_WREN ((uint32_t)0x00001000) /*!<Write enable bit */
+#define FMC_BCR2_WAITEN ((uint32_t)0x00002000) /*!<Wait enable bit */
+#define FMC_BCR2_EXTMOD ((uint32_t)0x00004000) /*!<Extended mode enable */
+#define FMC_BCR2_ASYNCWAIT ((uint32_t)0x00008000) /*!<Asynchronous wait */
+#define FMC_BCR2_CBURSTRW ((uint32_t)0x00080000) /*!<Write burst enable */
+
+/****************** Bit definition for FMC_BCR3 register *******************/
+#define FMC_BCR3_MBKEN ((uint32_t)0x00000001) /*!<Memory bank enable bit */
+#define FMC_BCR3_MUXEN ((uint32_t)0x00000002) /*!<Address/data multiplexing enable bit */
+
+#define FMC_BCR3_MTYP ((uint32_t)0x0000000C) /*!<MTYP[1:0] bits (Memory type) */
+#define FMC_BCR3_MTYP_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define FMC_BCR3_MTYP_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define FMC_BCR3_MWID ((uint32_t)0x00000030) /*!<MWID[1:0] bits (Memory data bus width) */
+#define FMC_BCR3_MWID_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FMC_BCR3_MWID_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define FMC_BCR3_FACCEN ((uint32_t)0x00000040) /*!<Flash access enable */
+#define FMC_BCR3_BURSTEN ((uint32_t)0x00000100) /*!<Burst enable bit */
+#define FMC_BCR3_WAITPOL ((uint32_t)0x00000200) /*!<Wait signal polarity bit */
+#define FMC_BCR3_WRAPMOD ((uint32_t)0x00000400) /*!<Wrapped burst mode support */
+#define FMC_BCR3_WAITCFG ((uint32_t)0x00000800) /*!<Wait timing configuration */
+#define FMC_BCR3_WREN ((uint32_t)0x00001000) /*!<Write enable bit */
+#define FMC_BCR3_WAITEN ((uint32_t)0x00002000) /*!<Wait enable bit */
+#define FMC_BCR3_EXTMOD ((uint32_t)0x00004000) /*!<Extended mode enable */
+#define FMC_BCR3_ASYNCWAIT ((uint32_t)0x00008000) /*!<Asynchronous wait */
+#define FMC_BCR3_CBURSTRW ((uint32_t)0x00080000) /*!<Write burst enable */
+
+/****************** Bit definition for FMC_BCR4 register *******************/
+#define FMC_BCR4_MBKEN ((uint32_t)0x00000001) /*!<Memory bank enable bit */
+#define FMC_BCR4_MUXEN ((uint32_t)0x00000002) /*!<Address/data multiplexing enable bit */
+
+#define FMC_BCR4_MTYP ((uint32_t)0x0000000C) /*!<MTYP[1:0] bits (Memory type) */
+#define FMC_BCR4_MTYP_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define FMC_BCR4_MTYP_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define FMC_BCR4_MWID ((uint32_t)0x00000030) /*!<MWID[1:0] bits (Memory data bus width) */
+#define FMC_BCR4_MWID_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FMC_BCR4_MWID_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define FMC_BCR4_FACCEN ((uint32_t)0x00000040) /*!<Flash access enable */
+#define FMC_BCR4_BURSTEN ((uint32_t)0x00000100) /*!<Burst enable bit */
+#define FMC_BCR4_WAITPOL ((uint32_t)0x00000200) /*!<Wait signal polarity bit */
+#define FMC_BCR4_WRAPMOD ((uint32_t)0x00000400) /*!<Wrapped burst mode support */
+#define FMC_BCR4_WAITCFG ((uint32_t)0x00000800) /*!<Wait timing configuration */
+#define FMC_BCR4_WREN ((uint32_t)0x00001000) /*!<Write enable bit */
+#define FMC_BCR4_WAITEN ((uint32_t)0x00002000) /*!<Wait enable bit */
+#define FMC_BCR4_EXTMOD ((uint32_t)0x00004000) /*!<Extended mode enable */
+#define FMC_BCR4_ASYNCWAIT ((uint32_t)0x00008000) /*!<Asynchronous wait */
+#define FMC_BCR4_CBURSTRW ((uint32_t)0x00080000) /*!<Write burst enable */
+
+/****************** Bit definition for FMC_BTR1 register ******************/
+#define FMC_BTR1_ADDSET ((uint32_t)0x0000000F) /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define FMC_BTR1_ADDSET_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FMC_BTR1_ADDSET_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FMC_BTR1_ADDSET_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FMC_BTR1_ADDSET_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define FMC_BTR1_ADDHLD ((uint32_t)0x000000F0) /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FMC_BTR1_ADDHLD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FMC_BTR1_ADDHLD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define FMC_BTR1_ADDHLD_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define FMC_BTR1_ADDHLD_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define FMC_BTR1_DATAST ((uint32_t)0x0000FF00) /*!<DATAST [3:0] bits (Data-phase duration) */
+#define FMC_BTR1_DATAST_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FMC_BTR1_DATAST_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FMC_BTR1_DATAST_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FMC_BTR1_DATAST_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FMC_BTR1_DATAST_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FMC_BTR1_DATAST_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FMC_BTR1_DATAST_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FMC_BTR1_DATAST_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FMC_BTR1_BUSTURN ((uint32_t)0x000F0000) /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define FMC_BTR1_BUSTURN_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FMC_BTR1_BUSTURN_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FMC_BTR1_BUSTURN_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FMC_BTR1_BUSTURN_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+
+#define FMC_BTR1_CLKDIV ((uint32_t)0x00F00000) /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define FMC_BTR1_CLKDIV_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define FMC_BTR1_CLKDIV_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define FMC_BTR1_CLKDIV_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define FMC_BTR1_CLKDIV_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+#define FMC_BTR1_DATLAT ((uint32_t)0x0F000000) /*!<DATLA[3:0] bits (Data latency) */
+#define FMC_BTR1_DATLAT_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FMC_BTR1_DATLAT_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FMC_BTR1_DATLAT_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FMC_BTR1_DATLAT_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define FMC_BTR1_ACCMOD ((uint32_t)0x30000000) /*!<ACCMOD[1:0] bits (Access mode) */
+#define FMC_BTR1_ACCMOD_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define FMC_BTR1_ACCMOD_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+
+/****************** Bit definition for FMC_BTR2 register *******************/
+#define FMC_BTR2_ADDSET ((uint32_t)0x0000000F) /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define FMC_BTR2_ADDSET_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FMC_BTR2_ADDSET_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FMC_BTR2_ADDSET_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FMC_BTR2_ADDSET_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define FMC_BTR2_ADDHLD ((uint32_t)0x000000F0) /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FMC_BTR2_ADDHLD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FMC_BTR2_ADDHLD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define FMC_BTR2_ADDHLD_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define FMC_BTR2_ADDHLD_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define FMC_BTR2_DATAST ((uint32_t)0x0000FF00) /*!<DATAST [3:0] bits (Data-phase duration) */
+#define FMC_BTR2_DATAST_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FMC_BTR2_DATAST_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FMC_BTR2_DATAST_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FMC_BTR2_DATAST_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FMC_BTR2_DATAST_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FMC_BTR2_DATAST_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FMC_BTR2_DATAST_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FMC_BTR2_DATAST_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FMC_BTR2_BUSTURN ((uint32_t)0x000F0000) /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define FMC_BTR2_BUSTURN_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FMC_BTR2_BUSTURN_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FMC_BTR2_BUSTURN_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FMC_BTR2_BUSTURN_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+
+#define FMC_BTR2_CLKDIV ((uint32_t)0x00F00000) /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define FMC_BTR2_CLKDIV_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define FMC_BTR2_CLKDIV_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define FMC_BTR2_CLKDIV_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define FMC_BTR2_CLKDIV_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+#define FMC_BTR2_DATLAT ((uint32_t)0x0F000000) /*!<DATLA[3:0] bits (Data latency) */
+#define FMC_BTR2_DATLAT_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FMC_BTR2_DATLAT_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FMC_BTR2_DATLAT_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FMC_BTR2_DATLAT_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define FMC_BTR2_ACCMOD ((uint32_t)0x30000000) /*!<ACCMOD[1:0] bits (Access mode) */
+#define FMC_BTR2_ACCMOD_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define FMC_BTR2_ACCMOD_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+
+/******************* Bit definition for FMC_BTR3 register *******************/
+#define FMC_BTR3_ADDSET ((uint32_t)0x0000000F) /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define FMC_BTR3_ADDSET_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FMC_BTR3_ADDSET_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FMC_BTR3_ADDSET_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FMC_BTR3_ADDSET_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define FMC_BTR3_ADDHLD ((uint32_t)0x000000F0) /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FMC_BTR3_ADDHLD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FMC_BTR3_ADDHLD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define FMC_BTR3_ADDHLD_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define FMC_BTR3_ADDHLD_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define FMC_BTR3_DATAST ((uint32_t)0x0000FF00) /*!<DATAST [3:0] bits (Data-phase duration) */
+#define FMC_BTR3_DATAST_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FMC_BTR3_DATAST_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FMC_BTR3_DATAST_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FMC_BTR3_DATAST_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FMC_BTR3_DATAST_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FMC_BTR3_DATAST_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FMC_BTR3_DATAST_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FMC_BTR3_DATAST_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FMC_BTR3_BUSTURN ((uint32_t)0x000F0000) /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define FMC_BTR3_BUSTURN_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FMC_BTR3_BUSTURN_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FMC_BTR3_BUSTURN_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FMC_BTR3_BUSTURN_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+
+#define FMC_BTR3_CLKDIV ((uint32_t)0x00F00000) /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define FMC_BTR3_CLKDIV_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define FMC_BTR3_CLKDIV_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define FMC_BTR3_CLKDIV_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define FMC_BTR3_CLKDIV_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+#define FMC_BTR3_DATLAT ((uint32_t)0x0F000000) /*!<DATLA[3:0] bits (Data latency) */
+#define FMC_BTR3_DATLAT_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FMC_BTR3_DATLAT_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FMC_BTR3_DATLAT_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FMC_BTR3_DATLAT_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define FMC_BTR3_ACCMOD ((uint32_t)0x30000000) /*!<ACCMOD[1:0] bits (Access mode) */
+#define FMC_BTR3_ACCMOD_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define FMC_BTR3_ACCMOD_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+
+/****************** Bit definition for FMC_BTR4 register *******************/
+#define FMC_BTR4_ADDSET ((uint32_t)0x0000000F) /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define FMC_BTR4_ADDSET_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FMC_BTR4_ADDSET_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FMC_BTR4_ADDSET_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FMC_BTR4_ADDSET_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define FMC_BTR4_ADDHLD ((uint32_t)0x000000F0) /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FMC_BTR4_ADDHLD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FMC_BTR4_ADDHLD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define FMC_BTR4_ADDHLD_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define FMC_BTR4_ADDHLD_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define FMC_BTR4_DATAST ((uint32_t)0x0000FF00) /*!<DATAST [3:0] bits (Data-phase duration) */
+#define FMC_BTR4_DATAST_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FMC_BTR4_DATAST_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FMC_BTR4_DATAST_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FMC_BTR4_DATAST_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FMC_BTR4_DATAST_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FMC_BTR4_DATAST_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FMC_BTR4_DATAST_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FMC_BTR4_DATAST_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FMC_BTR4_BUSTURN ((uint32_t)0x000F0000) /*!<BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define FMC_BTR4_BUSTURN_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FMC_BTR4_BUSTURN_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FMC_BTR4_BUSTURN_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FMC_BTR4_BUSTURN_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+
+#define FMC_BTR4_CLKDIV ((uint32_t)0x00F00000) /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define FMC_BTR4_CLKDIV_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define FMC_BTR4_CLKDIV_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define FMC_BTR4_CLKDIV_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define FMC_BTR4_CLKDIV_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+#define FMC_BTR4_DATLAT ((uint32_t)0x0F000000) /*!<DATLA[3:0] bits (Data latency) */
+#define FMC_BTR4_DATLAT_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FMC_BTR4_DATLAT_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FMC_BTR4_DATLAT_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FMC_BTR4_DATLAT_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define FMC_BTR4_ACCMOD ((uint32_t)0x30000000) /*!<ACCMOD[1:0] bits (Access mode) */
+#define FMC_BTR4_ACCMOD_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define FMC_BTR4_ACCMOD_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+
+/****************** Bit definition for FMC_BWTR1 register ******************/
+#define FMC_BWTR1_ADDSET ((uint32_t)0x0000000F) /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define FMC_BWTR1_ADDSET_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FMC_BWTR1_ADDSET_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FMC_BWTR1_ADDSET_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FMC_BWTR1_ADDSET_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define FMC_BWTR1_ADDHLD ((uint32_t)0x000000F0) /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FMC_BWTR1_ADDHLD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FMC_BWTR1_ADDHLD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define FMC_BWTR1_ADDHLD_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define FMC_BWTR1_ADDHLD_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define FMC_BWTR1_DATAST ((uint32_t)0x0000FF00) /*!<DATAST [3:0] bits (Data-phase duration) */
+#define FMC_BWTR1_DATAST_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FMC_BWTR1_DATAST_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FMC_BWTR1_DATAST_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FMC_BWTR1_DATAST_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FMC_BWTR1_DATAST_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FMC_BWTR1_DATAST_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FMC_BWTR1_DATAST_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FMC_BWTR1_DATAST_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FMC_BWTR1_CLKDIV ((uint32_t)0x00F00000) /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define FMC_BWTR1_CLKDIV_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define FMC_BWTR1_CLKDIV_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define FMC_BWTR1_CLKDIV_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define FMC_BWTR1_CLKDIV_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+#define FMC_BWTR1_DATLAT ((uint32_t)0x0F000000) /*!<DATLA[3:0] bits (Data latency) */
+#define FMC_BWTR1_DATLAT_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FMC_BWTR1_DATLAT_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FMC_BWTR1_DATLAT_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FMC_BWTR1_DATLAT_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define FMC_BWTR1_ACCMOD ((uint32_t)0x30000000) /*!<ACCMOD[1:0] bits (Access mode) */
+#define FMC_BWTR1_ACCMOD_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define FMC_BWTR1_ACCMOD_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+
+/****************** Bit definition for FMC_BWTR2 register ******************/
+#define FMC_BWTR2_ADDSET ((uint32_t)0x0000000F) /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define FMC_BWTR2_ADDSET_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FMC_BWTR2_ADDSET_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FMC_BWTR2_ADDSET_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FMC_BWTR2_ADDSET_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define FMC_BWTR2_ADDHLD ((uint32_t)0x000000F0) /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FMC_BWTR2_ADDHLD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FMC_BWTR2_ADDHLD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define FMC_BWTR2_ADDHLD_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define FMC_BWTR2_ADDHLD_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define FMC_BWTR2_DATAST ((uint32_t)0x0000FF00) /*!<DATAST [3:0] bits (Data-phase duration) */
+#define FMC_BWTR2_DATAST_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FMC_BWTR2_DATAST_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FMC_BWTR2_DATAST_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FMC_BWTR2_DATAST_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FMC_BWTR2_DATAST_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FMC_BWTR2_DATAST_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FMC_BWTR2_DATAST_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FMC_BWTR2_DATAST_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FMC_BWTR2_CLKDIV ((uint32_t)0x00F00000) /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define FMC_BWTR2_CLKDIV_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define FMC_BWTR2_CLKDIV_1 ((uint32_t)0x00200000) /*!<Bit 1*/
+#define FMC_BWTR2_CLKDIV_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define FMC_BWTR2_CLKDIV_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+#define FMC_BWTR2_DATLAT ((uint32_t)0x0F000000) /*!<DATLA[3:0] bits (Data latency) */
+#define FMC_BWTR2_DATLAT_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FMC_BWTR2_DATLAT_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FMC_BWTR2_DATLAT_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FMC_BWTR2_DATLAT_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define FMC_BWTR2_ACCMOD ((uint32_t)0x30000000) /*!<ACCMOD[1:0] bits (Access mode) */
+#define FMC_BWTR2_ACCMOD_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define FMC_BWTR2_ACCMOD_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+
+/****************** Bit definition for FMC_BWTR3 register ******************/
+#define FMC_BWTR3_ADDSET ((uint32_t)0x0000000F) /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define FMC_BWTR3_ADDSET_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FMC_BWTR3_ADDSET_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FMC_BWTR3_ADDSET_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FMC_BWTR3_ADDSET_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define FMC_BWTR3_ADDHLD ((uint32_t)0x000000F0) /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FMC_BWTR3_ADDHLD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FMC_BWTR3_ADDHLD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define FMC_BWTR3_ADDHLD_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define FMC_BWTR3_ADDHLD_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define FMC_BWTR3_DATAST ((uint32_t)0x0000FF00) /*!<DATAST [3:0] bits (Data-phase duration) */
+#define FMC_BWTR3_DATAST_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FMC_BWTR3_DATAST_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FMC_BWTR3_DATAST_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FMC_BWTR3_DATAST_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FMC_BWTR3_DATAST_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FMC_BWTR3_DATAST_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FMC_BWTR3_DATAST_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FMC_BWTR3_DATAST_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FMC_BWTR3_CLKDIV ((uint32_t)0x00F00000) /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define FMC_BWTR3_CLKDIV_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define FMC_BWTR3_CLKDIV_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define FMC_BWTR3_CLKDIV_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define FMC_BWTR3_CLKDIV_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+#define FMC_BWTR3_DATLAT ((uint32_t)0x0F000000) /*!<DATLA[3:0] bits (Data latency) */
+#define FMC_BWTR3_DATLAT_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FMC_BWTR3_DATLAT_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FMC_BWTR3_DATLAT_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FMC_BWTR3_DATLAT_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define FMC_BWTR3_ACCMOD ((uint32_t)0x30000000) /*!<ACCMOD[1:0] bits (Access mode) */
+#define FMC_BWTR3_ACCMOD_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define FMC_BWTR3_ACCMOD_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+
+/****************** Bit definition for FMC_BWTR4 register ******************/
+#define FMC_BWTR4_ADDSET ((uint32_t)0x0000000F) /*!<ADDSET[3:0] bits (Address setup phase duration) */
+#define FMC_BWTR4_ADDSET_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FMC_BWTR4_ADDSET_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FMC_BWTR4_ADDSET_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FMC_BWTR4_ADDSET_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define FMC_BWTR4_ADDHLD ((uint32_t)0x000000F0) /*!<ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FMC_BWTR4_ADDHLD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FMC_BWTR4_ADDHLD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define FMC_BWTR4_ADDHLD_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define FMC_BWTR4_ADDHLD_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define FMC_BWTR4_DATAST ((uint32_t)0x0000FF00) /*!<DATAST [3:0] bits (Data-phase duration) */
+#define FMC_BWTR4_DATAST_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FMC_BWTR4_DATAST_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FMC_BWTR4_DATAST_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FMC_BWTR4_DATAST_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FMC_BWTR4_DATAST_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FMC_BWTR4_DATAST_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FMC_BWTR4_DATAST_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FMC_BWTR4_DATAST_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FMC_BWTR4_CLKDIV ((uint32_t)0x00F00000) /*!<CLKDIV[3:0] bits (Clock divide ratio) */
+#define FMC_BWTR4_CLKDIV_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define FMC_BWTR4_CLKDIV_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define FMC_BWTR4_CLKDIV_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define FMC_BWTR4_CLKDIV_3 ((uint32_t)0x00800000) /*!<Bit 3 */
+
+#define FMC_BWTR4_DATLAT ((uint32_t)0x0F000000) /*!<DATLA[3:0] bits (Data latency) */
+#define FMC_BWTR4_DATLAT_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FMC_BWTR4_DATLAT_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FMC_BWTR4_DATLAT_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FMC_BWTR4_DATLAT_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define FMC_BWTR4_ACCMOD ((uint32_t)0x30000000) /*!<ACCMOD[1:0] bits (Access mode) */
+#define FMC_BWTR4_ACCMOD_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define FMC_BWTR4_ACCMOD_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+
+/****************** Bit definition for FMC_PCR2 register *******************/
+#define FMC_PCR2_PWAITEN ((uint32_t)0x00000002) /*!<Wait feature enable bit */
+#define FMC_PCR2_PBKEN ((uint32_t)0x00000004) /*!<PC Card/NAND Flash memory bank enable bit */
+#define FMC_PCR2_PTYP ((uint32_t)0x00000008) /*!<Memory type */
+
+#define FMC_PCR2_PWID ((uint32_t)0x00000030) /*!<PWID[1:0] bits (NAND Flash databus width) */
+#define FMC_PCR2_PWID_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FMC_PCR2_PWID_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define FMC_PCR2_ECCEN ((uint32_t)0x00000040) /*!<ECC computation logic enable bit */
+
+#define FMC_PCR2_TCLR ((uint32_t)0x00001E00) /*!<TCLR[3:0] bits (CLE to RE delay) */
+#define FMC_PCR2_TCLR_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define FMC_PCR2_TCLR_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+#define FMC_PCR2_TCLR_2 ((uint32_t)0x00000800) /*!<Bit 2 */
+#define FMC_PCR2_TCLR_3 ((uint32_t)0x00001000) /*!<Bit 3 */
+
+#define FMC_PCR2_TAR ((uint32_t)0x0001E000) /*!<TAR[3:0] bits (ALE to RE delay) */
+#define FMC_PCR2_TAR_0 ((uint32_t)0x00002000) /*!<Bit 0 */
+#define FMC_PCR2_TAR_1 ((uint32_t)0x00004000) /*!<Bit 1 */
+#define FMC_PCR2_TAR_2 ((uint32_t)0x00008000) /*!<Bit 2 */
+#define FMC_PCR2_TAR_3 ((uint32_t)0x00010000) /*!<Bit 3 */
+
+#define FMC_PCR2_ECCPS ((uint32_t)0x000E0000) /*!<ECCPS[1:0] bits (ECC page size) */
+#define FMC_PCR2_ECCPS_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define FMC_PCR2_ECCPS_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define FMC_PCR2_ECCPS_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+
+/****************** Bit definition for FMC_PCR3 register *******************/
+#define FMC_PCR3_PWAITEN ((uint32_t)0x00000002) /*!<Wait feature enable bit */
+#define FMC_PCR3_PBKEN ((uint32_t)0x00000004) /*!<PC Card/NAND Flash memory bank enable bit */
+#define FMC_PCR3_PTYP ((uint32_t)0x00000008) /*!<Memory type */
+
+#define FMC_PCR3_PWID ((uint32_t)0x00000030) /*!<PWID[1:0] bits (NAND Flash databus width) */
+#define FMC_PCR3_PWID_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FMC_PCR3_PWID_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define FMC_PCR3_ECCEN ((uint32_t)0x00000040) /*!<ECC computation logic enable bit */
+
+#define FMC_PCR3_TCLR ((uint32_t)0x00001E00) /*!<TCLR[3:0] bits (CLE to RE delay) */
+#define FMC_PCR3_TCLR_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define FMC_PCR3_TCLR_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+#define FMC_PCR3_TCLR_2 ((uint32_t)0x00000800) /*!<Bit 2 */
+#define FMC_PCR3_TCLR_3 ((uint32_t)0x00001000) /*!<Bit 3 */
+
+#define FMC_PCR3_TAR ((uint32_t)0x0001E000) /*!<TAR[3:0] bits (ALE to RE delay) */
+#define FMC_PCR3_TAR_0 ((uint32_t)0x00002000) /*!<Bit 0 */
+#define FMC_PCR3_TAR_1 ((uint32_t)0x00004000) /*!<Bit 1 */
+#define FMC_PCR3_TAR_2 ((uint32_t)0x00008000) /*!<Bit 2 */
+#define FMC_PCR3_TAR_3 ((uint32_t)0x00010000) /*!<Bit 3 */
+
+#define FMC_PCR3_ECCPS ((uint32_t)0x000E0000) /*!<ECCPS[2:0] bits (ECC page size) */
+#define FMC_PCR3_ECCPS_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define FMC_PCR3_ECCPS_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define FMC_PCR3_ECCPS_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+
+/****************** Bit definition for FMC_PCR4 register *******************/
+#define FMC_PCR4_PWAITEN ((uint32_t)0x00000002) /*!<Wait feature enable bit */
+#define FMC_PCR4_PBKEN ((uint32_t)0x00000004) /*!<PC Card/NAND Flash memory bank enable bit */
+#define FMC_PCR4_PTYP ((uint32_t)0x00000008) /*!<Memory type */
+
+#define FMC_PCR4_PWID ((uint32_t)0x00000030) /*!<PWID[1:0] bits (NAND Flash databus width) */
+#define FMC_PCR4_PWID_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FMC_PCR4_PWID_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define FMC_PCR4_ECCEN ((uint32_t)0x00000040) /*!<ECC computation logic enable bit */
+
+#define FMC_PCR4_TCLR ((uint32_t)0x00001E00) /*!<TCLR[3:0] bits (CLE to RE delay) */
+#define FMC_PCR4_TCLR_0 ((uint32_t)0x00000200) /*!<Bit 0 */
+#define FMC_PCR4_TCLR_1 ((uint32_t)0x00000400) /*!<Bit 1 */
+#define FMC_PCR4_TCLR_2 ((uint32_t)0x00000800) /*!<Bit 2 */
+#define FMC_PCR4_TCLR_3 ((uint32_t)0x00001000) /*!<Bit 3 */
+
+#define FMC_PCR4_TAR ((uint32_t)0x0001E000) /*!<TAR[3:0] bits (ALE to RE delay) */
+#define FMC_PCR4_TAR_0 ((uint32_t)0x00002000) /*!<Bit 0 */
+#define FMC_PCR4_TAR_1 ((uint32_t)0x00004000) /*!<Bit 1 */
+#define FMC_PCR4_TAR_2 ((uint32_t)0x00008000) /*!<Bit 2 */
+#define FMC_PCR4_TAR_3 ((uint32_t)0x00010000) /*!<Bit 3 */
+
+#define FMC_PCR4_ECCPS ((uint32_t)0x000E0000) /*!<ECCPS[2:0] bits (ECC page size) */
+#define FMC_PCR4_ECCPS_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define FMC_PCR4_ECCPS_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define FMC_PCR4_ECCPS_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+
+/******************* Bit definition for FMC_SR2 register *******************/
+#define FMC_SR2_IRS ((uint32_t)0x01) /*!<Interrupt Rising Edge status */
+#define FMC_SR2_ILS ((uint32_t)0x02) /*!<Interrupt Level status */
+#define FMC_SR2_IFS ((uint32_t)0x04) /*!<Interrupt Falling Edge status */
+#define FMC_SR2_IREN ((uint32_t)0x08) /*!<Interrupt Rising Edge detection Enable bit */
+#define FMC_SR2_ILEN ((uint32_t)0x10) /*!<Interrupt Level detection Enable bit */
+#define FMC_SR2_IFEN ((uint32_t)0x20) /*!<Interrupt Falling Edge detection Enable bit */
+#define FMC_SR2_FEMPT ((uint32_t)0x40) /*!<FIFO empty */
+
+/******************* Bit definition for FMC_SR3 register *******************/
+#define FMC_SR3_IRS ((uint32_t)0x01) /*!<Interrupt Rising Edge status */
+#define FMC_SR3_ILS ((uint32_t)0x02) /*!<Interrupt Level status */
+#define FMC_SR3_IFS ((uint32_t)0x04) /*!<Interrupt Falling Edge status */
+#define FMC_SR3_IREN ((uint32_t)0x08) /*!<Interrupt Rising Edge detection Enable bit */
+#define FMC_SR3_ILEN ((uint32_t)0x10) /*!<Interrupt Level detection Enable bit */
+#define FMC_SR3_IFEN ((uint32_t)0x20) /*!<Interrupt Falling Edge detection Enable bit */
+#define FMC_SR3_FEMPT ((uint32_t)0x40) /*!<FIFO empty */
+
+/******************* Bit definition for FMC_SR4 register *******************/
+#define FMC_SR4_IRS ((uint32_t)0x01) /*!<Interrupt Rising Edge status */
+#define FMC_SR4_ILS ((uint32_t)0x02) /*!<Interrupt Level status */
+#define FMC_SR4_IFS ((uint32_t)0x04) /*!<Interrupt Falling Edge status */
+#define FMC_SR4_IREN ((uint32_t)0x08) /*!<Interrupt Rising Edge detection Enable bit */
+#define FMC_SR4_ILEN ((uint32_t)0x10) /*!<Interrupt Level detection Enable bit */
+#define FMC_SR4_IFEN ((uint32_t)0x20) /*!<Interrupt Falling Edge detection Enable bit */
+#define FMC_SR4_FEMPT ((uint32_t)0x40) /*!<FIFO empty */
+
+/****************** Bit definition for FMC_PMEM2 register ******************/
+#define FMC_PMEM2_MEMSET2 ((uint32_t)0x000000FF) /*!<MEMSET2[7:0] bits (Common memory 2 setup time) */
+#define FMC_PMEM2_MEMSET2_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FMC_PMEM2_MEMSET2_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FMC_PMEM2_MEMSET2_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FMC_PMEM2_MEMSET2_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define FMC_PMEM2_MEMSET2_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define FMC_PMEM2_MEMSET2_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define FMC_PMEM2_MEMSET2_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define FMC_PMEM2_MEMSET2_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define FMC_PMEM2_MEMWAIT2 ((uint32_t)0x0000FF00) /*!<MEMWAIT2[7:0] bits (Common memory 2 wait time) */
+#define FMC_PMEM2_MEMWAIT2_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FMC_PMEM2_MEMWAIT2_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FMC_PMEM2_MEMWAIT2_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FMC_PMEM2_MEMWAIT2_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FMC_PMEM2_MEMWAIT2_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FMC_PMEM2_MEMWAIT2_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FMC_PMEM2_MEMWAIT2_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FMC_PMEM2_MEMWAIT2_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FMC_PMEM2_MEMHOLD2 ((uint32_t)0x00FF0000) /*!<MEMHOLD2[7:0] bits (Common memory 2 hold time) */
+#define FMC_PMEM2_MEMHOLD2_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FMC_PMEM2_MEMHOLD2_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FMC_PMEM2_MEMHOLD2_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FMC_PMEM2_MEMHOLD2_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define FMC_PMEM2_MEMHOLD2_4 ((uint32_t)0x00100000) /*!<Bit 4 */
+#define FMC_PMEM2_MEMHOLD2_5 ((uint32_t)0x00200000) /*!<Bit 5 */
+#define FMC_PMEM2_MEMHOLD2_6 ((uint32_t)0x00400000) /*!<Bit 6 */
+#define FMC_PMEM2_MEMHOLD2_7 ((uint32_t)0x00800000) /*!<Bit 7 */
+
+#define FMC_PMEM2_MEMHIZ2 ((uint32_t)0xFF000000) /*!<MEMHIZ2[7:0] bits (Common memory 2 databus HiZ time) */
+#define FMC_PMEM2_MEMHIZ2_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FMC_PMEM2_MEMHIZ2_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FMC_PMEM2_MEMHIZ2_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FMC_PMEM2_MEMHIZ2_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define FMC_PMEM2_MEMHIZ2_4 ((uint32_t)0x10000000) /*!<Bit 4 */
+#define FMC_PMEM2_MEMHIZ2_5 ((uint32_t)0x20000000) /*!<Bit 5 */
+#define FMC_PMEM2_MEMHIZ2_6 ((uint32_t)0x40000000) /*!<Bit 6 */
+#define FMC_PMEM2_MEMHIZ2_7 ((uint32_t)0x80000000) /*!<Bit 7 */
+
+/****************** Bit definition for FMC_PMEM3 register ******************/
+#define FMC_PMEM3_MEMSET3 ((uint32_t)0x000000FF) /*!<MEMSET3[7:0] bits (Common memory 3 setup time) */
+#define FMC_PMEM3_MEMSET3_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FMC_PMEM3_MEMSET3_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FMC_PMEM3_MEMSET3_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FMC_PMEM3_MEMSET3_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define FMC_PMEM3_MEMSET3_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define FMC_PMEM3_MEMSET3_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define FMC_PMEM3_MEMSET3_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define FMC_PMEM3_MEMSET3_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define FMC_PMEM3_MEMWAIT3 ((uint32_t)0x0000FF00) /*!<MEMWAIT3[7:0] bits (Common memory 3 wait time) */
+#define FMC_PMEM3_MEMWAIT3_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FMC_PMEM3_MEMWAIT3_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FMC_PMEM3_MEMWAIT3_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FMC_PMEM3_MEMWAIT3_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FMC_PMEM3_MEMWAIT3_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FMC_PMEM3_MEMWAIT3_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FMC_PMEM3_MEMWAIT3_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FMC_PMEM3_MEMWAIT3_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FMC_PMEM3_MEMHOLD3 ((uint32_t)0x00FF0000) /*!<MEMHOLD3[7:0] bits (Common memory 3 hold time) */
+#define FMC_PMEM3_MEMHOLD3_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FMC_PMEM3_MEMHOLD3_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FMC_PMEM3_MEMHOLD3_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FMC_PMEM3_MEMHOLD3_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define FMC_PMEM3_MEMHOLD3_4 ((uint32_t)0x00100000) /*!<Bit 4 */
+#define FMC_PMEM3_MEMHOLD3_5 ((uint32_t)0x00200000) /*!<Bit 5 */
+#define FMC_PMEM3_MEMHOLD3_6 ((uint32_t)0x00400000) /*!<Bit 6 */
+#define FMC_PMEM3_MEMHOLD3_7 ((uint32_t)0x00800000) /*!<Bit 7 */
+
+#define FMC_PMEM3_MEMHIZ3 ((uint32_t)0xFF000000) /*!<MEMHIZ3[7:0] bits (Common memory 3 databus HiZ time) */
+#define FMC_PMEM3_MEMHIZ3_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FMC_PMEM3_MEMHIZ3_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FMC_PMEM3_MEMHIZ3_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FMC_PMEM3_MEMHIZ3_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define FMC_PMEM3_MEMHIZ3_4 ((uint32_t)0x10000000) /*!<Bit 4 */
+#define FMC_PMEM3_MEMHIZ3_5 ((uint32_t)0x20000000) /*!<Bit 5 */
+#define FMC_PMEM3_MEMHIZ3_6 ((uint32_t)0x40000000) /*!<Bit 6 */
+#define FMC_PMEM3_MEMHIZ3_7 ((uint32_t)0x80000000) /*!<Bit 7 */
+
+/****************** Bit definition for FMC_PMEM4 register ******************/
+#define FMC_PMEM4_MEMSET4 ((uint32_t)0x000000FF) /*!<MEMSET4[7:0] bits (Common memory 4 setup time) */
+#define FMC_PMEM4_MEMSET4_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FMC_PMEM4_MEMSET4_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FMC_PMEM4_MEMSET4_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FMC_PMEM4_MEMSET4_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define FMC_PMEM4_MEMSET4_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define FMC_PMEM4_MEMSET4_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define FMC_PMEM4_MEMSET4_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define FMC_PMEM4_MEMSET4_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define FMC_PMEM4_MEMWAIT4 ((uint32_t)0x0000FF00) /*!<MEMWAIT4[7:0] bits (Common memory 4 wait time) */
+#define FMC_PMEM4_MEMWAIT4_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FMC_PMEM4_MEMWAIT4_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FMC_PMEM4_MEMWAIT4_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FMC_PMEM4_MEMWAIT4_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FMC_PMEM4_MEMWAIT4_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FMC_PMEM4_MEMWAIT4_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FMC_PMEM4_MEMWAIT4_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FMC_PMEM4_MEMWAIT4_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FMC_PMEM4_MEMHOLD4 ((uint32_t)0x00FF0000) /*!<MEMHOLD4[7:0] bits (Common memory 4 hold time) */
+#define FMC_PMEM4_MEMHOLD4_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FMC_PMEM4_MEMHOLD4_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FMC_PMEM4_MEMHOLD4_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FMC_PMEM4_MEMHOLD4_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define FMC_PMEM4_MEMHOLD4_4 ((uint32_t)0x00100000) /*!<Bit 4 */
+#define FMC_PMEM4_MEMHOLD4_5 ((uint32_t)0x00200000) /*!<Bit 5 */
+#define FMC_PMEM4_MEMHOLD4_6 ((uint32_t)0x00400000) /*!<Bit 6 */
+#define FMC_PMEM4_MEMHOLD4_7 ((uint32_t)0x00800000) /*!<Bit 7 */
+
+#define FMC_PMEM4_MEMHIZ4 ((uint32_t)0xFF000000) /*!<MEMHIZ4[7:0] bits (Common memory 4 databus HiZ time) */
+#define FMC_PMEM4_MEMHIZ4_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FMC_PMEM4_MEMHIZ4_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FMC_PMEM4_MEMHIZ4_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FMC_PMEM4_MEMHIZ4_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define FMC_PMEM4_MEMHIZ4_4 ((uint32_t)0x10000000) /*!<Bit 4 */
+#define FMC_PMEM4_MEMHIZ4_5 ((uint32_t)0x20000000) /*!<Bit 5 */
+#define FMC_PMEM4_MEMHIZ4_6 ((uint32_t)0x40000000) /*!<Bit 6 */
+#define FMC_PMEM4_MEMHIZ4_7 ((uint32_t)0x80000000) /*!<Bit 7 */
+
+/****************** Bit definition for FMC_PATT2 register ******************/
+#define FMC_PATT2_ATTSET2 ((uint32_t)0x000000FF) /*!<ATTSET2[7:0] bits (Attribute memory 2 setup time) */
+#define FMC_PATT2_ATTSET2_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FMC_PATT2_ATTSET2_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FMC_PATT2_ATTSET2_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FMC_PATT2_ATTSET2_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define FMC_PATT2_ATTSET2_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define FMC_PATT2_ATTSET2_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define FMC_PATT2_ATTSET2_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define FMC_PATT2_ATTSET2_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define FMC_PATT2_ATTWAIT2 ((uint32_t)0x0000FF00) /*!<ATTWAIT2[7:0] bits (Attribute memory 2 wait time) */
+#define FMC_PATT2_ATTWAIT2_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FMC_PATT2_ATTWAIT2_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FMC_PATT2_ATTWAIT2_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FMC_PATT2_ATTWAIT2_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FMC_PATT2_ATTWAIT2_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FMC_PATT2_ATTWAIT2_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FMC_PATT2_ATTWAIT2_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FMC_PATT2_ATTWAIT2_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FMC_PATT2_ATTHOLD2 ((uint32_t)0x00FF0000) /*!<ATTHOLD2[7:0] bits (Attribute memory 2 hold time) */
+#define FMC_PATT2_ATTHOLD2_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FMC_PATT2_ATTHOLD2_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FMC_PATT2_ATTHOLD2_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FMC_PATT2_ATTHOLD2_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define FMC_PATT2_ATTHOLD2_4 ((uint32_t)0x00100000) /*!<Bit 4 */
+#define FMC_PATT2_ATTHOLD2_5 ((uint32_t)0x00200000) /*!<Bit 5 */
+#define FMC_PATT2_ATTHOLD2_6 ((uint32_t)0x00400000) /*!<Bit 6 */
+#define FMC_PATT2_ATTHOLD2_7 ((uint32_t)0x00800000) /*!<Bit 7 */
+
+#define FMC_PATT2_ATTHIZ2 ((uint32_t)0xFF000000) /*!<ATTHIZ2[7:0] bits (Attribute memory 2 databus HiZ time) */
+#define FMC_PATT2_ATTHIZ2_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FMC_PATT2_ATTHIZ2_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FMC_PATT2_ATTHIZ2_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FMC_PATT2_ATTHIZ2_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define FMC_PATT2_ATTHIZ2_4 ((uint32_t)0x10000000) /*!<Bit 4 */
+#define FMC_PATT2_ATTHIZ2_5 ((uint32_t)0x20000000) /*!<Bit 5 */
+#define FMC_PATT2_ATTHIZ2_6 ((uint32_t)0x40000000) /*!<Bit 6 */
+#define FMC_PATT2_ATTHIZ2_7 ((uint32_t)0x80000000) /*!<Bit 7 */
+
+/****************** Bit definition for FMC_PATT3 register ******************/
+#define FMC_PATT3_ATTSET3 ((uint32_t)0x000000FF) /*!<ATTSET3[7:0] bits (Attribute memory 3 setup time) */
+#define FMC_PATT3_ATTSET3_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FMC_PATT3_ATTSET3_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FMC_PATT3_ATTSET3_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FMC_PATT3_ATTSET3_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define FMC_PATT3_ATTSET3_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define FMC_PATT3_ATTSET3_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define FMC_PATT3_ATTSET3_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define FMC_PATT3_ATTSET3_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define FMC_PATT3_ATTWAIT3 ((uint32_t)0x0000FF00) /*!<ATTWAIT3[7:0] bits (Attribute memory 3 wait time) */
+#define FMC_PATT3_ATTWAIT3_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FMC_PATT3_ATTWAIT3_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FMC_PATT3_ATTWAIT3_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FMC_PATT3_ATTWAIT3_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FMC_PATT3_ATTWAIT3_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FMC_PATT3_ATTWAIT3_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FMC_PATT3_ATTWAIT3_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FMC_PATT3_ATTWAIT3_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FMC_PATT3_ATTHOLD3 ((uint32_t)0x00FF0000) /*!<ATTHOLD3[7:0] bits (Attribute memory 3 hold time) */
+#define FMC_PATT3_ATTHOLD3_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FMC_PATT3_ATTHOLD3_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FMC_PATT3_ATTHOLD3_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FMC_PATT3_ATTHOLD3_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define FMC_PATT3_ATTHOLD3_4 ((uint32_t)0x00100000) /*!<Bit 4 */
+#define FMC_PATT3_ATTHOLD3_5 ((uint32_t)0x00200000) /*!<Bit 5 */
+#define FMC_PATT3_ATTHOLD3_6 ((uint32_t)0x00400000) /*!<Bit 6 */
+#define FMC_PATT3_ATTHOLD3_7 ((uint32_t)0x00800000) /*!<Bit 7 */
+
+#define FMC_PATT3_ATTHIZ3 ((uint32_t)0xFF000000) /*!<ATTHIZ3[7:0] bits (Attribute memory 3 databus HiZ time) */
+#define FMC_PATT3_ATTHIZ3_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FMC_PATT3_ATTHIZ3_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FMC_PATT3_ATTHIZ3_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FMC_PATT3_ATTHIZ3_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define FMC_PATT3_ATTHIZ3_4 ((uint32_t)0x10000000) /*!<Bit 4 */
+#define FMC_PATT3_ATTHIZ3_5 ((uint32_t)0x20000000) /*!<Bit 5 */
+#define FMC_PATT3_ATTHIZ3_6 ((uint32_t)0x40000000) /*!<Bit 6 */
+#define FMC_PATT3_ATTHIZ3_7 ((uint32_t)0x80000000) /*!<Bit 7 */
+
+/****************** Bit definition for FMC_PATT4 register ******************/
+#define FMC_PATT4_ATTSET4 ((uint32_t)0x000000FF) /*!<ATTSET4[7:0] bits (Attribute memory 4 setup time) */
+#define FMC_PATT4_ATTSET4_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FMC_PATT4_ATTSET4_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FMC_PATT4_ATTSET4_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FMC_PATT4_ATTSET4_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define FMC_PATT4_ATTSET4_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define FMC_PATT4_ATTSET4_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define FMC_PATT4_ATTSET4_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define FMC_PATT4_ATTSET4_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define FMC_PATT4_ATTWAIT4 ((uint32_t)0x0000FF00) /*!<ATTWAIT4[7:0] bits (Attribute memory 4 wait time) */
+#define FMC_PATT4_ATTWAIT4_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FMC_PATT4_ATTWAIT4_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FMC_PATT4_ATTWAIT4_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FMC_PATT4_ATTWAIT4_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FMC_PATT4_ATTWAIT4_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FMC_PATT4_ATTWAIT4_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FMC_PATT4_ATTWAIT4_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FMC_PATT4_ATTWAIT4_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FMC_PATT4_ATTHOLD4 ((uint32_t)0x00FF0000) /*!<ATTHOLD4[7:0] bits (Attribute memory 4 hold time) */
+#define FMC_PATT4_ATTHOLD4_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FMC_PATT4_ATTHOLD4_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FMC_PATT4_ATTHOLD4_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FMC_PATT4_ATTHOLD4_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define FMC_PATT4_ATTHOLD4_4 ((uint32_t)0x00100000) /*!<Bit 4 */
+#define FMC_PATT4_ATTHOLD4_5 ((uint32_t)0x00200000) /*!<Bit 5 */
+#define FMC_PATT4_ATTHOLD4_6 ((uint32_t)0x00400000) /*!<Bit 6 */
+#define FMC_PATT4_ATTHOLD4_7 ((uint32_t)0x00800000) /*!<Bit 7 */
+
+#define FMC_PATT4_ATTHIZ4 ((uint32_t)0xFF000000) /*!<ATTHIZ4[7:0] bits (Attribute memory 4 databus HiZ time) */
+#define FMC_PATT4_ATTHIZ4_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FMC_PATT4_ATTHIZ4_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FMC_PATT4_ATTHIZ4_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FMC_PATT4_ATTHIZ4_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define FMC_PATT4_ATTHIZ4_4 ((uint32_t)0x10000000) /*!<Bit 4 */
+#define FMC_PATT4_ATTHIZ4_5 ((uint32_t)0x20000000) /*!<Bit 5 */
+#define FMC_PATT4_ATTHIZ4_6 ((uint32_t)0x40000000) /*!<Bit 6 */
+#define FMC_PATT4_ATTHIZ4_7 ((uint32_t)0x80000000) /*!<Bit 7 */
+
+/****************** Bit definition for FMC_PIO4 register *******************/
+#define FMC_PIO4_IOSET4 ((uint32_t)0x000000FF) /*!<IOSET4[7:0] bits (I/O 4 setup time) */
+#define FMC_PIO4_IOSET4_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FMC_PIO4_IOSET4_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FMC_PIO4_IOSET4_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FMC_PIO4_IOSET4_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define FMC_PIO4_IOSET4_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define FMC_PIO4_IOSET4_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define FMC_PIO4_IOSET4_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define FMC_PIO4_IOSET4_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define FMC_PIO4_IOWAIT4 ((uint32_t)0x0000FF00) /*!<IOWAIT4[7:0] bits (I/O 4 wait time) */
+#define FMC_PIO4_IOWAIT4_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FMC_PIO4_IOWAIT4_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FMC_PIO4_IOWAIT4_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FMC_PIO4_IOWAIT4_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define FMC_PIO4_IOWAIT4_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+#define FMC_PIO4_IOWAIT4_5 ((uint32_t)0x00002000) /*!<Bit 5 */
+#define FMC_PIO4_IOWAIT4_6 ((uint32_t)0x00004000) /*!<Bit 6 */
+#define FMC_PIO4_IOWAIT4_7 ((uint32_t)0x00008000) /*!<Bit 7 */
+
+#define FMC_PIO4_IOHOLD4 ((uint32_t)0x00FF0000) /*!<IOHOLD4[7:0] bits (I/O 4 hold time) */
+#define FMC_PIO4_IOHOLD4_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FMC_PIO4_IOHOLD4_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FMC_PIO4_IOHOLD4_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+#define FMC_PIO4_IOHOLD4_3 ((uint32_t)0x00080000) /*!<Bit 3 */
+#define FMC_PIO4_IOHOLD4_4 ((uint32_t)0x00100000) /*!<Bit 4 */
+#define FMC_PIO4_IOHOLD4_5 ((uint32_t)0x00200000) /*!<Bit 5 */
+#define FMC_PIO4_IOHOLD4_6 ((uint32_t)0x00400000) /*!<Bit 6 */
+#define FMC_PIO4_IOHOLD4_7 ((uint32_t)0x00800000) /*!<Bit 7 */
+
+#define FMC_PIO4_IOHIZ4 ((uint32_t)0xFF000000) /*!<IOHIZ4[7:0] bits (I/O 4 databus HiZ time) */
+#define FMC_PIO4_IOHIZ4_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FMC_PIO4_IOHIZ4_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FMC_PIO4_IOHIZ4_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define FMC_PIO4_IOHIZ4_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+#define FMC_PIO4_IOHIZ4_4 ((uint32_t)0x10000000) /*!<Bit 4 */
+#define FMC_PIO4_IOHIZ4_5 ((uint32_t)0x20000000) /*!<Bit 5 */
+#define FMC_PIO4_IOHIZ4_6 ((uint32_t)0x40000000) /*!<Bit 6 */
+#define FMC_PIO4_IOHIZ4_7 ((uint32_t)0x80000000) /*!<Bit 7 */
+
+/****************** Bit definition for FMC_ECCR2 register ******************/
+#define FMC_ECCR2_ECC2 ((uint32_t)0xFFFFFFFF) /*!<ECC result */
+
+/****************** Bit definition for FMC_ECCR3 register ******************/
+#define FMC_ECCR3_ECC3 ((uint32_t)0xFFFFFFFF) /*!<ECC result */
+
+/****************** Bit definition for FMC_SDCR1 register ******************/
+#define FMC_SDCR1_NC ((uint32_t)0x00000003) /*!<NC[1:0] bits (Number of column bits) */
+#define FMC_SDCR1_NC_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FMC_SDCR1_NC_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define FMC_SDCR1_NR ((uint32_t)0x0000000C) /*!<NR[1:0] bits (Number of row bits) */
+#define FMC_SDCR1_NR_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define FMC_SDCR1_NR_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define FMC_SDCR1_MWID ((uint32_t)0x00000030) /*!<NR[1:0] bits (Number of row bits) */
+#define FMC_SDCR1_MWID_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FMC_SDCR1_MWID_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define FMC_SDCR1_NB ((uint32_t)0x00000040) /*!<Number of internal bank */
+
+#define FMC_SDCR1_CAS ((uint32_t)0x00000180) /*!<CAS[1:0] bits (CAS latency) */
+#define FMC_SDCR1_CAS_0 ((uint32_t)0x00000080) /*!<Bit 0 */
+#define FMC_SDCR1_CAS_1 ((uint32_t)0x00000100) /*!<Bit 1 */
+
+#define FMC_SDCR1_WP ((uint32_t)0x00000200) /*!<Write protection */
+
+#define FMC_SDCR1_SDCLK ((uint32_t)0x00000C00) /*!<SDRAM clock configuration */
+#define FMC_SDCR1_SDCLK_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define FMC_SDCR1_SDCLK_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define FMC_SDCR1_RBURST ((uint32_t)0x00001000) /*!<Read burst */
+
+#define FMC_SDCR1_RPIPE ((uint32_t)0x00006000) /*!<Write protection */
+#define FMC_SDCR1_RPIPE_0 ((uint32_t)0x00002000) /*!<Bit 0 */
+#define FMC_SDCR1_RPIPE_1 ((uint32_t)0x00004000) /*!<Bit 1 */
+
+/****************** Bit definition for FMC_SDCR2 register ******************/
+#define FMC_SDCR2_NC ((uint32_t)0x00000003) /*!<NC[1:0] bits (Number of column bits) */
+#define FMC_SDCR2_NC_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FMC_SDCR2_NC_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define FMC_SDCR2_NR ((uint32_t)0x0000000C) /*!<NR[1:0] bits (Number of row bits) */
+#define FMC_SDCR2_NR_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define FMC_SDCR2_NR_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define FMC_SDCR2_MWID ((uint32_t)0x00000030) /*!<NR[1:0] bits (Number of row bits) */
+#define FMC_SDCR2_MWID_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FMC_SDCR2_MWID_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+
+#define FMC_SDCR2_NB ((uint32_t)0x00000040) /*!<Number of internal bank */
+
+#define FMC_SDCR2_CAS ((uint32_t)0x00000180) /*!<CAS[1:0] bits (CAS latency) */
+#define FMC_SDCR2_CAS_0 ((uint32_t)0x00000080) /*!<Bit 0 */
+#define FMC_SDCR2_CAS_1 ((uint32_t)0x00000100) /*!<Bit 1 */
+
+#define FMC_SDCR2_WP ((uint32_t)0x00000200) /*!<Write protection */
+
+#define FMC_SDCR2_SDCLK ((uint32_t)0x00000C00) /*!<SDCLK[1:0] (SDRAM clock configuration) */
+#define FMC_SDCR2_SDCLK_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define FMC_SDCR2_SDCLK_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define FMC_SDCR2_RBURST ((uint32_t)0x00001000) /*!<Read burst */
+
+#define FMC_SDCR2_RPIPE ((uint32_t)0x00006000) /*!<RPIPE[1:0](Read pipe) */
+#define FMC_SDCR2_RPIPE_0 ((uint32_t)0x00002000) /*!<Bit 0 */
+#define FMC_SDCR2_RPIPE_1 ((uint32_t)0x00004000) /*!<Bit 1 */
+
+/****************** Bit definition for FMC_SDTR1 register ******************/
+#define FMC_SDTR1_TMRD ((uint32_t)0x0000000F) /*!<TMRD[3:0] bits (Load mode register to active) */
+#define FMC_SDTR1_TMRD_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FMC_SDTR1_TMRD_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FMC_SDTR1_TMRD_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FMC_SDTR1_TMRD_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define FMC_SDTR1_TXSR ((uint32_t)0x000000F0) /*!<TXSR[3:0] bits (Exit self refresh) */
+#define FMC_SDTR1_TXSR_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FMC_SDTR1_TXSR_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define FMC_SDTR1_TXSR_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define FMC_SDTR1_TXSR_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define FMC_SDTR1_TRAS ((uint32_t)0x00000F00) /*!<TRAS[3:0] bits (Self refresh time) */
+#define FMC_SDTR1_TRAS_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FMC_SDTR1_TRAS_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FMC_SDTR1_TRAS_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FMC_SDTR1_TRAS_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define FMC_SDTR1_TRC ((uint32_t)0x0000F000) /*!<TRC[2:0] bits (Row cycle delay) */
+#define FMC_SDTR1_TRC_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define FMC_SDTR1_TRC_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define FMC_SDTR1_TRC_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define FMC_SDTR1_TWR ((uint32_t)0x000F0000) /*!<TRC[2:0] bits (Write recovery delay) */
+#define FMC_SDTR1_TWR_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FMC_SDTR1_TWR_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FMC_SDTR1_TWR_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+
+#define FMC_SDTR1_TRP ((uint32_t)0x00F00000) /*!<TRP[2:0] bits (Row precharge delay) */
+#define FMC_SDTR1_TRP_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define FMC_SDTR1_TRP_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define FMC_SDTR1_TRP_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+
+#define FMC_SDTR1_TRCD ((uint32_t)0x0F000000) /*!<TRP[2:0] bits (Row to column delay) */
+#define FMC_SDTR1_TRCD_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FMC_SDTR1_TRCD_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FMC_SDTR1_TRCD_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+
+/****************** Bit definition for FMC_SDTR2 register ******************/
+#define FMC_SDTR2_TMRD ((uint32_t)0x0000000F) /*!<TMRD[3:0] bits (Load mode register to active) */
+#define FMC_SDTR2_TMRD_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FMC_SDTR2_TMRD_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FMC_SDTR2_TMRD_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define FMC_SDTR2_TMRD_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+#define FMC_SDTR2_TXSR ((uint32_t)0x000000F0) /*!<TXSR[3:0] bits (Exit self refresh) */
+#define FMC_SDTR2_TXSR_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define FMC_SDTR2_TXSR_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define FMC_SDTR2_TXSR_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define FMC_SDTR2_TXSR_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define FMC_SDTR2_TRAS ((uint32_t)0x00000F00) /*!<TRAS[3:0] bits (Self refresh time) */
+#define FMC_SDTR2_TRAS_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define FMC_SDTR2_TRAS_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define FMC_SDTR2_TRAS_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define FMC_SDTR2_TRAS_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define FMC_SDTR2_TRC ((uint32_t)0x0000F000) /*!<TRC[2:0] bits (Row cycle delay) */
+#define FMC_SDTR2_TRC_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define FMC_SDTR2_TRC_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define FMC_SDTR2_TRC_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define FMC_SDTR2_TWR ((uint32_t)0x000F0000) /*!<TRC[2:0] bits (Write recovery delay) */
+#define FMC_SDTR2_TWR_0 ((uint32_t)0x00010000) /*!<Bit 0 */
+#define FMC_SDTR2_TWR_1 ((uint32_t)0x00020000) /*!<Bit 1 */
+#define FMC_SDTR2_TWR_2 ((uint32_t)0x00040000) /*!<Bit 2 */
+
+#define FMC_SDTR2_TRP ((uint32_t)0x00F00000) /*!<TRP[2:0] bits (Row precharge delay) */
+#define FMC_SDTR2_TRP_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define FMC_SDTR2_TRP_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define FMC_SDTR2_TRP_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+
+#define FMC_SDTR2_TRCD ((uint32_t)0x0F000000) /*!<TRP[2:0] bits (Row to column delay) */
+#define FMC_SDTR2_TRCD_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define FMC_SDTR2_TRCD_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define FMC_SDTR2_TRCD_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+
+/****************** Bit definition for FMC_SDCMR register ******************/
+#define FMC_SDCMR_MODE ((uint32_t)0x00000007) /*!<MODE[2:0] bits (Command mode) */
+#define FMC_SDCMR_MODE_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define FMC_SDCMR_MODE_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define FMC_SDCMR_MODE_2 ((uint32_t)0x00000003) /*!<Bit 2 */
+
+#define FMC_SDCMR_CTB2 ((uint32_t)0x00000008) /*!<Command target 2 */
+
+#define FMC_SDCMR_CTB1 ((uint32_t)0x00000010) /*!<Command target 1 */
+
+#define FMC_SDCMR_NRFS ((uint32_t)0x000001E0) /*!<NRFS[3:0] bits (Number of auto-refresh) */
+#define FMC_SDCMR_NRFS_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define FMC_SDCMR_NRFS_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define FMC_SDCMR_NRFS_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+#define FMC_SDCMR_NRFS_3 ((uint32_t)0x00000100) /*!<Bit 3 */
+
+#define FMC_SDCMR_MRD ((uint32_t)0x003FFE00) /*!<MRD[12:0] bits (Mode register definition) */
+
+/****************** Bit definition for FMC_SDRTR register ******************/
+#define FMC_SDRTR_CRE ((uint32_t)0x00000001) /*!<Clear refresh error flag */
+
+#define FMC_SDRTR_COUNT ((uint32_t)0x00003FFE) /*!<COUNT[12:0] bits (Refresh timer count) */
+
+#define FMC_SDRTR_REIE ((uint32_t)0x00004000) /*!<RES interupt enable */
+
+/****************** Bit definition for FMC_SDSR register ******************/
+#define FMC_SDSR_RE ((uint32_t)0x00000001) /*!<Refresh error flag */
+
+#define FMC_SDSR_MODES1 ((uint32_t)0x00000006) /*!<MODES1[1:0]bits (Status mode for bank 1) */
+#define FMC_SDSR_MODES1_0 ((uint32_t)0x00000002) /*!<Bit 0 */
+#define FMC_SDSR_MODES1_1 ((uint32_t)0x00000004) /*!<Bit 1 */
+
+#define FMC_SDSR_MODES2 ((uint32_t)0x00000018) /*!<MODES2[1:0]bits (Status mode for bank 2) */
+#define FMC_SDSR_MODES2_0 ((uint32_t)0x00000008) /*!<Bit 0 */
+#define FMC_SDSR_MODES2_1 ((uint32_t)0x00000010) /*!<Bit 1 */
+#define FMC_SDSR_BUSY ((uint32_t)0x00000020) /*!<Busy status */
+
+
+
+/******************************************************************************/
+/* */
+/* General Purpose I/O (GPIO) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for GPIO_MODER register *****************/
+#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
+#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
+#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
+#define GPIO_MODER_MODER1 ((uint32_t)0x0000000C)
+#define GPIO_MODER_MODER1_0 ((uint32_t)0x00000004)
+#define GPIO_MODER_MODER1_1 ((uint32_t)0x00000008)
+#define GPIO_MODER_MODER2 ((uint32_t)0x00000030)
+#define GPIO_MODER_MODER2_0 ((uint32_t)0x00000010)
+#define GPIO_MODER_MODER2_1 ((uint32_t)0x00000020)
+#define GPIO_MODER_MODER3 ((uint32_t)0x000000C0)
+#define GPIO_MODER_MODER3_0 ((uint32_t)0x00000040)
+#define GPIO_MODER_MODER3_1 ((uint32_t)0x00000080)
+#define GPIO_MODER_MODER4 ((uint32_t)0x00000300)
+#define GPIO_MODER_MODER4_0 ((uint32_t)0x00000100)
+#define GPIO_MODER_MODER4_1 ((uint32_t)0x00000200)
+#define GPIO_MODER_MODER5 ((uint32_t)0x00000C00)
+#define GPIO_MODER_MODER5_0 ((uint32_t)0x00000400)
+#define GPIO_MODER_MODER5_1 ((uint32_t)0x00000800)
+#define GPIO_MODER_MODER6 ((uint32_t)0x00003000)
+#define GPIO_MODER_MODER6_0 ((uint32_t)0x00001000)
+#define GPIO_MODER_MODER6_1 ((uint32_t)0x00002000)
+#define GPIO_MODER_MODER7 ((uint32_t)0x0000C000)
+#define GPIO_MODER_MODER7_0 ((uint32_t)0x00004000)
+#define GPIO_MODER_MODER7_1 ((uint32_t)0x00008000)
+#define GPIO_MODER_MODER8 ((uint32_t)0x00030000)
+#define GPIO_MODER_MODER8_0 ((uint32_t)0x00010000)
+#define GPIO_MODER_MODER8_1 ((uint32_t)0x00020000)
+#define GPIO_MODER_MODER9 ((uint32_t)0x000C0000)
+#define GPIO_MODER_MODER9_0 ((uint32_t)0x00040000)
+#define GPIO_MODER_MODER9_1 ((uint32_t)0x00080000)
+#define GPIO_MODER_MODER10 ((uint32_t)0x00300000)
+#define GPIO_MODER_MODER10_0 ((uint32_t)0x00100000)
+#define GPIO_MODER_MODER10_1 ((uint32_t)0x00200000)
+#define GPIO_MODER_MODER11 ((uint32_t)0x00C00000)
+#define GPIO_MODER_MODER11_0 ((uint32_t)0x00400000)
+#define GPIO_MODER_MODER11_1 ((uint32_t)0x00800000)
+#define GPIO_MODER_MODER12 ((uint32_t)0x03000000)
+#define GPIO_MODER_MODER12_0 ((uint32_t)0x01000000)
+#define GPIO_MODER_MODER12_1 ((uint32_t)0x02000000)
+#define GPIO_MODER_MODER13 ((uint32_t)0x0C000000)
+#define GPIO_MODER_MODER13_0 ((uint32_t)0x04000000)
+#define GPIO_MODER_MODER13_1 ((uint32_t)0x08000000)
+#define GPIO_MODER_MODER14 ((uint32_t)0x30000000)
+#define GPIO_MODER_MODER14_0 ((uint32_t)0x10000000)
+#define GPIO_MODER_MODER14_1 ((uint32_t)0x20000000)
+#define GPIO_MODER_MODER15 ((uint32_t)0xC0000000)
+#define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
+#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_OTYPER register *****************/
+#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
+#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
+#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
+#define GPIO_OTYPER_OT_3 ((uint32_t)0x00000008)
+#define GPIO_OTYPER_OT_4 ((uint32_t)0x00000010)
+#define GPIO_OTYPER_OT_5 ((uint32_t)0x00000020)
+#define GPIO_OTYPER_OT_6 ((uint32_t)0x00000040)
+#define GPIO_OTYPER_OT_7 ((uint32_t)0x00000080)
+#define GPIO_OTYPER_OT_8 ((uint32_t)0x00000100)
+#define GPIO_OTYPER_OT_9 ((uint32_t)0x00000200)
+#define GPIO_OTYPER_OT_10 ((uint32_t)0x00000400)
+#define GPIO_OTYPER_OT_11 ((uint32_t)0x00000800)
+#define GPIO_OTYPER_OT_12 ((uint32_t)0x00001000)
+#define GPIO_OTYPER_OT_13 ((uint32_t)0x00002000)
+#define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
+#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
+
+/**************** Bit definition for GPIO_OSPEEDR register ******************/
+#define GPIO_OSPEEDER_OSPEEDR0 ((uint32_t)0x00000003)
+#define GPIO_OSPEEDER_OSPEEDR0_0 ((uint32_t)0x00000001)
+#define GPIO_OSPEEDER_OSPEEDR0_1 ((uint32_t)0x00000002)
+#define GPIO_OSPEEDER_OSPEEDR1 ((uint32_t)0x0000000C)
+#define GPIO_OSPEEDER_OSPEEDR1_0 ((uint32_t)0x00000004)
+#define GPIO_OSPEEDER_OSPEEDR1_1 ((uint32_t)0x00000008)
+#define GPIO_OSPEEDER_OSPEEDR2 ((uint32_t)0x00000030)
+#define GPIO_OSPEEDER_OSPEEDR2_0 ((uint32_t)0x00000010)
+#define GPIO_OSPEEDER_OSPEEDR2_1 ((uint32_t)0x00000020)
+#define GPIO_OSPEEDER_OSPEEDR3 ((uint32_t)0x000000C0)
+#define GPIO_OSPEEDER_OSPEEDR3_0 ((uint32_t)0x00000040)
+#define GPIO_OSPEEDER_OSPEEDR3_1 ((uint32_t)0x00000080)
+#define GPIO_OSPEEDER_OSPEEDR4 ((uint32_t)0x00000300)
+#define GPIO_OSPEEDER_OSPEEDR4_0 ((uint32_t)0x00000100)
+#define GPIO_OSPEEDER_OSPEEDR4_1 ((uint32_t)0x00000200)
+#define GPIO_OSPEEDER_OSPEEDR5 ((uint32_t)0x00000C00)
+#define GPIO_OSPEEDER_OSPEEDR5_0 ((uint32_t)0x00000400)
+#define GPIO_OSPEEDER_OSPEEDR5_1 ((uint32_t)0x00000800)
+#define GPIO_OSPEEDER_OSPEEDR6 ((uint32_t)0x00003000)
+#define GPIO_OSPEEDER_OSPEEDR6_0 ((uint32_t)0x00001000)
+#define GPIO_OSPEEDER_OSPEEDR6_1 ((uint32_t)0x00002000)
+#define GPIO_OSPEEDER_OSPEEDR7 ((uint32_t)0x0000C000)
+#define GPIO_OSPEEDER_OSPEEDR7_0 ((uint32_t)0x00004000)
+#define GPIO_OSPEEDER_OSPEEDR7_1 ((uint32_t)0x00008000)
+#define GPIO_OSPEEDER_OSPEEDR8 ((uint32_t)0x00030000)
+#define GPIO_OSPEEDER_OSPEEDR8_0 ((uint32_t)0x00010000)
+#define GPIO_OSPEEDER_OSPEEDR8_1 ((uint32_t)0x00020000)
+#define GPIO_OSPEEDER_OSPEEDR9 ((uint32_t)0x000C0000)
+#define GPIO_OSPEEDER_OSPEEDR9_0 ((uint32_t)0x00040000)
+#define GPIO_OSPEEDER_OSPEEDR9_1 ((uint32_t)0x00080000)
+#define GPIO_OSPEEDER_OSPEEDR10 ((uint32_t)0x00300000)
+#define GPIO_OSPEEDER_OSPEEDR10_0 ((uint32_t)0x00100000)
+#define GPIO_OSPEEDER_OSPEEDR10_1 ((uint32_t)0x00200000)
+#define GPIO_OSPEEDER_OSPEEDR11 ((uint32_t)0x00C00000)
+#define GPIO_OSPEEDER_OSPEEDR11_0 ((uint32_t)0x00400000)
+#define GPIO_OSPEEDER_OSPEEDR11_1 ((uint32_t)0x00800000)
+#define GPIO_OSPEEDER_OSPEEDR12 ((uint32_t)0x03000000)
+#define GPIO_OSPEEDER_OSPEEDR12_0 ((uint32_t)0x01000000)
+#define GPIO_OSPEEDER_OSPEEDR12_1 ((uint32_t)0x02000000)
+#define GPIO_OSPEEDER_OSPEEDR13 ((uint32_t)0x0C000000)
+#define GPIO_OSPEEDER_OSPEEDR13_0 ((uint32_t)0x04000000)
+#define GPIO_OSPEEDER_OSPEEDR13_1 ((uint32_t)0x08000000)
+#define GPIO_OSPEEDER_OSPEEDR14 ((uint32_t)0x30000000)
+#define GPIO_OSPEEDER_OSPEEDR14_0 ((uint32_t)0x10000000)
+#define GPIO_OSPEEDER_OSPEEDR14_1 ((uint32_t)0x20000000)
+#define GPIO_OSPEEDER_OSPEEDR15 ((uint32_t)0xC0000000)
+#define GPIO_OSPEEDER_OSPEEDR15_0 ((uint32_t)0x40000000)
+#define GPIO_OSPEEDER_OSPEEDR15_1 ((uint32_t)0x80000000)
+
+/******************* Bit definition for GPIO_PUPDR register ******************/
+#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
+#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
+#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
+#define GPIO_PUPDR_PUPDR1 ((uint32_t)0x0000000C)
+#define GPIO_PUPDR_PUPDR1_0 ((uint32_t)0x00000004)
+#define GPIO_PUPDR_PUPDR1_1 ((uint32_t)0x00000008)
+#define GPIO_PUPDR_PUPDR2 ((uint32_t)0x00000030)
+#define GPIO_PUPDR_PUPDR2_0 ((uint32_t)0x00000010)
+#define GPIO_PUPDR_PUPDR2_1 ((uint32_t)0x00000020)
+#define GPIO_PUPDR_PUPDR3 ((uint32_t)0x000000C0)
+#define GPIO_PUPDR_PUPDR3_0 ((uint32_t)0x00000040)
+#define GPIO_PUPDR_PUPDR3_1 ((uint32_t)0x00000080)
+#define GPIO_PUPDR_PUPDR4 ((uint32_t)0x00000300)
+#define GPIO_PUPDR_PUPDR4_0 ((uint32_t)0x00000100)
+#define GPIO_PUPDR_PUPDR4_1 ((uint32_t)0x00000200)
+#define GPIO_PUPDR_PUPDR5 ((uint32_t)0x00000C00)
+#define GPIO_PUPDR_PUPDR5_0 ((uint32_t)0x00000400)
+#define GPIO_PUPDR_PUPDR5_1 ((uint32_t)0x00000800)
+#define GPIO_PUPDR_PUPDR6 ((uint32_t)0x00003000)
+#define GPIO_PUPDR_PUPDR6_0 ((uint32_t)0x00001000)
+#define GPIO_PUPDR_PUPDR6_1 ((uint32_t)0x00002000)
+#define GPIO_PUPDR_PUPDR7 ((uint32_t)0x0000C000)
+#define GPIO_PUPDR_PUPDR7_0 ((uint32_t)0x00004000)
+#define GPIO_PUPDR_PUPDR7_1 ((uint32_t)0x00008000)
+#define GPIO_PUPDR_PUPDR8 ((uint32_t)0x00030000)
+#define GPIO_PUPDR_PUPDR8_0 ((uint32_t)0x00010000)
+#define GPIO_PUPDR_PUPDR8_1 ((uint32_t)0x00020000)
+#define GPIO_PUPDR_PUPDR9 ((uint32_t)0x000C0000)
+#define GPIO_PUPDR_PUPDR9_0 ((uint32_t)0x00040000)
+#define GPIO_PUPDR_PUPDR9_1 ((uint32_t)0x00080000)
+#define GPIO_PUPDR_PUPDR10 ((uint32_t)0x00300000)
+#define GPIO_PUPDR_PUPDR10_0 ((uint32_t)0x00100000)
+#define GPIO_PUPDR_PUPDR10_1 ((uint32_t)0x00200000)
+#define GPIO_PUPDR_PUPDR11 ((uint32_t)0x00C00000)
+#define GPIO_PUPDR_PUPDR11_0 ((uint32_t)0x00400000)
+#define GPIO_PUPDR_PUPDR11_1 ((uint32_t)0x00800000)
+#define GPIO_PUPDR_PUPDR12 ((uint32_t)0x03000000)
+#define GPIO_PUPDR_PUPDR12_0 ((uint32_t)0x01000000)
+#define GPIO_PUPDR_PUPDR12_1 ((uint32_t)0x02000000)
+#define GPIO_PUPDR_PUPDR13 ((uint32_t)0x0C000000)
+#define GPIO_PUPDR_PUPDR13_0 ((uint32_t)0x04000000)
+#define GPIO_PUPDR_PUPDR13_1 ((uint32_t)0x08000000)
+#define GPIO_PUPDR_PUPDR14 ((uint32_t)0x30000000)
+#define GPIO_PUPDR_PUPDR14_0 ((uint32_t)0x10000000)
+#define GPIO_PUPDR_PUPDR14_1 ((uint32_t)0x20000000)
+#define GPIO_PUPDR_PUPDR15 ((uint32_t)0xC0000000)
+#define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
+#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
+
+/******************* Bit definition for GPIO_IDR register *******************/
+#define GPIO_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_IDR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_ODR register ********************/
+#define GPIO_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_ODR_15 ((uint32_t)0x00008000)
+
+/****************** Bit definition for GPIO_BSRR register ********************/
+#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
+#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
+#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
+#define GPIO_BSRR_BS_3 ((uint32_t)0x00000008)
+#define GPIO_BSRR_BS_4 ((uint32_t)0x00000010)
+#define GPIO_BSRR_BS_5 ((uint32_t)0x00000020)
+#define GPIO_BSRR_BS_6 ((uint32_t)0x00000040)
+#define GPIO_BSRR_BS_7 ((uint32_t)0x00000080)
+#define GPIO_BSRR_BS_8 ((uint32_t)0x00000100)
+#define GPIO_BSRR_BS_9 ((uint32_t)0x00000200)
+#define GPIO_BSRR_BS_10 ((uint32_t)0x00000400)
+#define GPIO_BSRR_BS_11 ((uint32_t)0x00000800)
+#define GPIO_BSRR_BS_12 ((uint32_t)0x00001000)
+#define GPIO_BSRR_BS_13 ((uint32_t)0x00002000)
+#define GPIO_BSRR_BS_14 ((uint32_t)0x00004000)
+#define GPIO_BSRR_BS_15 ((uint32_t)0x00008000)
+#define GPIO_BSRR_BR_0 ((uint32_t)0x00010000)
+#define GPIO_BSRR_BR_1 ((uint32_t)0x00020000)
+#define GPIO_BSRR_BR_2 ((uint32_t)0x00040000)
+#define GPIO_BSRR_BR_3 ((uint32_t)0x00080000)
+#define GPIO_BSRR_BR_4 ((uint32_t)0x00100000)
+#define GPIO_BSRR_BR_5 ((uint32_t)0x00200000)
+#define GPIO_BSRR_BR_6 ((uint32_t)0x00400000)
+#define GPIO_BSRR_BR_7 ((uint32_t)0x00800000)
+#define GPIO_BSRR_BR_8 ((uint32_t)0x01000000)
+#define GPIO_BSRR_BR_9 ((uint32_t)0x02000000)
+#define GPIO_BSRR_BR_10 ((uint32_t)0x04000000)
+#define GPIO_BSRR_BR_11 ((uint32_t)0x08000000)
+#define GPIO_BSRR_BR_12 ((uint32_t)0x10000000)
+#define GPIO_BSRR_BR_13 ((uint32_t)0x20000000)
+#define GPIO_BSRR_BR_14 ((uint32_t)0x40000000)
+#define GPIO_BSRR_BR_15 ((uint32_t)0x80000000)
+
+/****************** Bit definition for GPIO_LCKR register ********************/
+#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001)
+#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002)
+#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004)
+#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008)
+#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010)
+#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020)
+#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040)
+#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080)
+#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100)
+#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200)
+#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400)
+#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800)
+#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000)
+#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000)
+#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000)
+#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000)
+#define GPIO_LCKR_LCKK ((uint32_t)0x00010000)
+
+/****************** Bit definition for GPIO_AFRL register ********************/
+#define GPIO_AFRL_AFRL0 ((uint32_t)0x0000000F)
+#define GPIO_AFRL_AFRL1 ((uint32_t)0x000000F0)
+#define GPIO_AFRL_AFRL2 ((uint32_t)0x00000F00)
+#define GPIO_AFRL_AFRL3 ((uint32_t)0x0000F000)
+#define GPIO_AFRL_AFRL4 ((uint32_t)0x000F0000)
+#define GPIO_AFRL_AFRL5 ((uint32_t)0x00F00000)
+#define GPIO_AFRL_AFRL6 ((uint32_t)0x0F000000)
+#define GPIO_AFRL_AFRL7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_AFRH register ********************/
+#define GPIO_AFRH_AFRH0 ((uint32_t)0x0000000F)
+#define GPIO_AFRH_AFRH1 ((uint32_t)0x000000F0)
+#define GPIO_AFRH_AFRH2 ((uint32_t)0x00000F00)
+#define GPIO_AFRH_AFRH3 ((uint32_t)0x0000F000)
+#define GPIO_AFRH_AFRH4 ((uint32_t)0x000F0000)
+#define GPIO_AFRH_AFRH5 ((uint32_t)0x00F00000)
+#define GPIO_AFRH_AFRH6 ((uint32_t)0x0F000000)
+#define GPIO_AFRH_AFRH7 ((uint32_t)0xF0000000)
+
+/****************** Bit definition for GPIO_BRR register *********************/
+#define GPIO_BRR_BR_0 ((uint32_t)0x00000001)
+#define GPIO_BRR_BR_1 ((uint32_t)0x00000002)
+#define GPIO_BRR_BR_2 ((uint32_t)0x00000004)
+#define GPIO_BRR_BR_3 ((uint32_t)0x00000008)
+#define GPIO_BRR_BR_4 ((uint32_t)0x00000010)
+#define GPIO_BRR_BR_5 ((uint32_t)0x00000020)
+#define GPIO_BRR_BR_6 ((uint32_t)0x00000040)
+#define GPIO_BRR_BR_7 ((uint32_t)0x00000080)
+#define GPIO_BRR_BR_8 ((uint32_t)0x00000100)
+#define GPIO_BRR_BR_9 ((uint32_t)0x00000200)
+#define GPIO_BRR_BR_10 ((uint32_t)0x00000400)
+#define GPIO_BRR_BR_11 ((uint32_t)0x00000800)
+#define GPIO_BRR_BR_12 ((uint32_t)0x00001000)
+#define GPIO_BRR_BR_13 ((uint32_t)0x00002000)
+#define GPIO_BRR_BR_14 ((uint32_t)0x00004000)
+#define GPIO_BRR_BR_15 ((uint32_t)0x00008000)
+
+/******************************************************************************/
+/* */
+/* Inter-integrated Circuit Interface (I2C) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for I2C_CR1 register *******************/
+#define I2C_CR1_PE ((uint32_t)0x00000001) /*!< Peripheral enable */
+#define I2C_CR1_TXIE ((uint32_t)0x00000002) /*!< TX interrupt enable */
+#define I2C_CR1_RXIE ((uint32_t)0x00000004) /*!< RX interrupt enable */
+#define I2C_CR1_ADDRIE ((uint32_t)0x00000008) /*!< Address match interrupt enable */
+#define I2C_CR1_NACKIE ((uint32_t)0x00000010) /*!< NACK received interrupt enable */
+#define I2C_CR1_STOPIE ((uint32_t)0x00000020) /*!< STOP detection interrupt enable */
+#define I2C_CR1_TCIE ((uint32_t)0x00000040) /*!< Transfer complete interrupt enable */
+#define I2C_CR1_ERRIE ((uint32_t)0x00000080) /*!< Errors interrupt enable */
+#define I2C_CR1_DFN ((uint32_t)0x00000F00) /*!< Digital noise filter */
+#define I2C_CR1_ANFOFF ((uint32_t)0x00001000) /*!< Analog noise filter OFF */
+#define I2C_CR1_SWRST ((uint32_t)0x00002000) /*!< Software reset */
+#define I2C_CR1_TXDMAEN ((uint32_t)0x00004000) /*!< DMA transmission requests enable */
+#define I2C_CR1_RXDMAEN ((uint32_t)0x00008000) /*!< DMA reception requests enable */
+#define I2C_CR1_SBC ((uint32_t)0x00010000) /*!< Slave byte control */
+#define I2C_CR1_NOSTRETCH ((uint32_t)0x00020000) /*!< Clock stretching disable */
+#define I2C_CR1_WUPEN ((uint32_t)0x00040000) /*!< Wakeup from STOP enable */
+#define I2C_CR1_GCEN ((uint32_t)0x00080000) /*!< General call enable */
+#define I2C_CR1_SMBHEN ((uint32_t)0x00100000) /*!< SMBus host address enable */
+#define I2C_CR1_SMBDEN ((uint32_t)0x00200000) /*!< SMBus device default address enable */
+#define I2C_CR1_ALERTEN ((uint32_t)0x00400000) /*!< SMBus alert enable */
+#define I2C_CR1_PECEN ((uint32_t)0x00800000) /*!< PEC enable */
+
+/****************** Bit definition for I2C_CR2 register ********************/
+#define I2C_CR2_SADD ((uint32_t)0x000003FF) /*!< Slave address (master mode) */
+#define I2C_CR2_RD_WRN ((uint32_t)0x00000400) /*!< Transfer direction (master mode) */
+#define I2C_CR2_ADD10 ((uint32_t)0x00000800) /*!< 10-bit addressing mode (master mode) */
+#define I2C_CR2_HEAD10R ((uint32_t)0x00001000) /*!< 10-bit address header only read direction (master mode) */
+#define I2C_CR2_START ((uint32_t)0x00002000) /*!< START generation */
+#define I2C_CR2_STOP ((uint32_t)0x00004000) /*!< STOP generation (master mode) */
+#define I2C_CR2_NACK ((uint32_t)0x00008000) /*!< NACK generation (slave mode) */
+#define I2C_CR2_NBYTES ((uint32_t)0x00FF0000) /*!< Number of bytes */
+#define I2C_CR2_RELOAD ((uint32_t)0x01000000) /*!< NBYTES reload mode */
+#define I2C_CR2_AUTOEND ((uint32_t)0x02000000) /*!< Automatic end mode (master mode) */
+#define I2C_CR2_PECBYTE ((uint32_t)0x04000000) /*!< Packet error checking byte */
+
+/******************* Bit definition for I2C_OAR1 register ******************/
+#define I2C_OAR1_OA1 ((uint32_t)0x000003FF) /*!< Interface own address 1 */
+#define I2C_OAR1_OA1MODE ((uint32_t)0x00000400) /*!< Own address 1 10-bit mode */
+#define I2C_OAR1_OA1EN ((uint32_t)0x00008000) /*!< Own address 1 enable */
+
+/******************* Bit definition for I2C_OAR2 register *******************/
+#define I2C_OAR2_OA2 ((uint32_t)0x000000FE) /*!< Interface own address 2 */
+#define I2C_OAR2_OA2MSK ((uint32_t)0x00000700) /*!< Own address 2 masks */
+#define I2C_OAR2_OA2EN ((uint32_t)0x00008000) /*!< Own address 2 enable */
+
+/******************* Bit definition for I2C_TIMINGR register *****************/
+#define I2C_TIMINGR_SCLL ((uint32_t)0x000000FF) /*!< SCL low period (master mode) */
+#define I2C_TIMINGR_SCLH ((uint32_t)0x0000FF00) /*!< SCL high period (master mode) */
+#define I2C_TIMINGR_SDADEL ((uint32_t)0x000F0000) /*!< Data hold time */
+#define I2C_TIMINGR_SCLDEL ((uint32_t)0x00F00000) /*!< Data setup time */
+#define I2C_TIMINGR_PRESC ((uint32_t)0xF0000000) /*!< Timings prescaler */
+
+/******************* Bit definition for I2C_TIMEOUTR register *****************/
+#define I2C_TIMEOUTR_TIMEOUTA ((uint32_t)0x00000FFF) /*!< Bus timeout A */
+#define I2C_TIMEOUTR_TIDLE ((uint32_t)0x00001000) /*!< Idle clock timeout detection */
+#define I2C_TIMEOUTR_TIMOUTEN ((uint32_t)0x00008000) /*!< Clock timeout enable */
+#define I2C_TIMEOUTR_TIMEOUTB ((uint32_t)0x0FFF0000) /*!< Bus timeout B*/
+#define I2C_TIMEOUTR_TEXTEN ((uint32_t)0x80000000) /*!< Extended clock timeout enable */
+
+/****************** Bit definition for I2C_ISR register *********************/
+#define I2C_ISR_TXE ((uint32_t)0x00000001) /*!< Transmit data register empty */
+#define I2C_ISR_TXIS ((uint32_t)0x00000002) /*!< Transmit interrupt status */
+#define I2C_ISR_RXNE ((uint32_t)0x00000004) /*!< Receive data register not empty */
+#define I2C_ISR_ADDR ((uint32_t)0x00000008) /*!< Address matched (slave mode)*/
+#define I2C_ISR_NACKF ((uint32_t)0x00000010) /*!< NACK received flag */
+#define I2C_ISR_STOPF ((uint32_t)0x00000020) /*!< STOP detection flag */
+#define I2C_ISR_TC ((uint32_t)0x00000040) /*!< Transfer complete (master mode) */
+#define I2C_ISR_TCR ((uint32_t)0x00000080) /*!< Transfer complete reload */
+#define I2C_ISR_BERR ((uint32_t)0x00000100) /*!< Bus error */
+#define I2C_ISR_ARLO ((uint32_t)0x00000200) /*!< Arbitration lost */
+#define I2C_ISR_OVR ((uint32_t)0x00000400) /*!< Overrun/Underrun */
+#define I2C_ISR_PECERR ((uint32_t)0x00000800) /*!< PEC error in reception */
+#define I2C_ISR_TIMEOUT ((uint32_t)0x00001000) /*!< Timeout or Tlow detection flag */
+#define I2C_ISR_ALERT ((uint32_t)0x00002000) /*!< SMBus alert */
+#define I2C_ISR_BUSY ((uint32_t)0x00008000) /*!< Bus busy */
+#define I2C_ISR_DIR ((uint32_t)0x00010000) /*!< Transfer direction (slave mode) */
+#define I2C_ISR_ADDCODE ((uint32_t)0x00FE0000) /*!< Address match code (slave mode) */
+
+/****************** Bit definition for I2C_ICR register *********************/
+#define I2C_ICR_ADDRCF ((uint32_t)0x00000008) /*!< Address matched clear flag */
+#define I2C_ICR_NACKCF ((uint32_t)0x00000010) /*!< NACK clear flag */
+#define I2C_ICR_STOPCF ((uint32_t)0x00000020) /*!< STOP detection clear flag */
+#define I2C_ICR_BERRCF ((uint32_t)0x00000100) /*!< Bus error clear flag */
+#define I2C_ICR_ARLOCF ((uint32_t)0x00000200) /*!< Arbitration lost clear flag */
+#define I2C_ICR_OVRCF ((uint32_t)0x00000400) /*!< Overrun/Underrun clear flag */
+#define I2C_ICR_PECCF ((uint32_t)0x00000800) /*!< PAC error clear flag */
+#define I2C_ICR_TIMOUTCF ((uint32_t)0x00001000) /*!< Timeout clear flag */
+#define I2C_ICR_ALERTCF ((uint32_t)0x00002000) /*!< Alert clear flag */
+
+/****************** Bit definition for I2C_PECR register ********************/
+#define I2C_PECR_PEC ((uint32_t)0x000000FF) /*!< PEC register */
+
+/****************** Bit definition for I2C_RXDR register *********************/
+#define I2C_RXDR_RXDATA ((uint32_t)0x000000FF) /*!< 8-bit receive data */
+
+/****************** Bit definition for I2C_TXDR register *********************/
+#define I2C_TXDR_TXDATA ((uint32_t)0x000000FF) /*!< 8-bit transmit data */
+
+
+/******************************************************************************/
+/* */
+/* Independent WATCHDOG (IWDG) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for IWDG_KR register ********************/
+#define IWDG_KR_KEY ((uint32_t)0x0000FFFF) /*!< Key value (write only, read 0000h) */
+
+/******************* Bit definition for IWDG_PR register ********************/
+#define IWDG_PR_PR ((uint32_t)0x00000007) /*!< PR[2:0] (Prescaler divider) */
+#define IWDG_PR_PR_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define IWDG_PR_PR_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define IWDG_PR_PR_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+/******************* Bit definition for IWDG_RLR register *******************/
+#define IWDG_RLR_RL ((uint32_t)0x00000FFF) /*!< Watchdog counter reload value */
+
+/******************* Bit definition for IWDG_SR register ********************/
+#define IWDG_SR_PVU ((uint32_t)0x00000001) /*!< Watchdog prescaler value update */
+#define IWDG_SR_RVU ((uint32_t)0x00000002) /*!< Watchdog counter reload value update */
+#define IWDG_SR_WVU ((uint32_t)0x00000004) /*!< Watchdog counter window value update */
+
+/******************* Bit definition for IWDG_KR register ********************/
+#define IWDG_WINR_WIN ((uint32_t)0x00000FFF) /*!< Watchdog counter window value */
+
+/******************************************************************************/
+/* */
+/* Power Control */
+/* */
+/******************************************************************************/
+/******************** Bit definition for PWR_CR register ********************/
+#define PWR_CR_LPDS ((uint32_t)0x00000001) /*!< Low-power Deepsleep */
+#define PWR_CR_PDDS ((uint32_t)0x00000002) /*!< Power Down Deepsleep */
+#define PWR_CR_CWUF ((uint32_t)0x00000004) /*!< Clear Wakeup Flag */
+#define PWR_CR_CSBF ((uint32_t)0x00000008) /*!< Clear Standby Flag */
+#define PWR_CR_PVDE ((uint32_t)0x00000010) /*!< Power Voltage Detector Enable */
+
+#define PWR_CR_PLS ((uint32_t)0x000000E0) /*!< PLS[2:0] bits (PVD Level Selection) */
+#define PWR_CR_PLS_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define PWR_CR_PLS_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define PWR_CR_PLS_2 ((uint32_t)0x00000080) /*!< Bit 2 */
+
+/*!< PVD level configuration */
+#define PWR_CR_PLS_LEV0 ((uint32_t)0x00000000) /*!< PVD level 0 */
+#define PWR_CR_PLS_LEV1 ((uint32_t)0x00000020) /*!< PVD level 1 */
+#define PWR_CR_PLS_LEV2 ((uint32_t)0x00000040) /*!< PVD level 2 */
+#define PWR_CR_PLS_LEV3 ((uint32_t)0x00000060) /*!< PVD level 3 */
+#define PWR_CR_PLS_LEV4 ((uint32_t)0x00000080) /*!< PVD level 4 */
+#define PWR_CR_PLS_LEV5 ((uint32_t)0x000000A0) /*!< PVD level 5 */
+#define PWR_CR_PLS_LEV6 ((uint32_t)0x000000C0) /*!< PVD level 6 */
+#define PWR_CR_PLS_LEV7 ((uint32_t)0x000000E0) /*!< PVD level 7 */
+
+#define PWR_CR_DBP ((uint32_t)0x00000100) /*!< Disable Backup Domain write protection */
+
+/******************* Bit definition for PWR_CSR register ********************/
+#define PWR_CSR_WUF ((uint32_t)0x00000001) /*!< Wakeup Flag */
+#define PWR_CSR_SBF ((uint32_t)0x00000002) /*!< Standby Flag */
+#define PWR_CSR_PVDO ((uint32_t)0x00000004) /*!< PVD Output */
+#define PWR_CSR_VREFINTRDYF ((uint32_t)0x00000008) /*!< Internal voltage reference (VREFINT) ready flag */
+
+#define PWR_CSR_EWUP1 ((uint32_t)0x00000100) /*!< Enable WKUP pin 1 */
+#define PWR_CSR_EWUP2 ((uint32_t)0x00000200) /*!< Enable WKUP pin 2 */
+#define PWR_CSR_EWUP3 ((uint32_t)0x00000400) /*!< Enable WKUP pin 3 */
+
+/******************************************************************************/
+/* */
+/* Reset and Clock Control */
+/* */
+/******************************************************************************/
+/******************** Bit definition for RCC_CR register ********************/
+#define RCC_CR_HSION ((uint32_t)0x00000001)
+#define RCC_CR_HSIRDY ((uint32_t)0x00000002)
+
+#define RCC_CR_HSITRIM ((uint32_t)0x000000F8)
+#define RCC_CR_HSITRIM_0 ((uint32_t)0x00000008)/*!<Bit 0 */
+#define RCC_CR_HSITRIM_1 ((uint32_t)0x00000010)/*!<Bit 1 */
+#define RCC_CR_HSITRIM_2 ((uint32_t)0x00000020)/*!<Bit 2 */
+#define RCC_CR_HSITRIM_3 ((uint32_t)0x00000040)/*!<Bit 3 */
+#define RCC_CR_HSITRIM_4 ((uint32_t)0x00000080)/*!<Bit 4 */
+
+#define RCC_CR_HSICAL ((uint32_t)0x0000FF00)
+#define RCC_CR_HSICAL_0 ((uint32_t)0x00000100)/*!<Bit 0 */
+#define RCC_CR_HSICAL_1 ((uint32_t)0x00000200)/*!<Bit 1 */
+#define RCC_CR_HSICAL_2 ((uint32_t)0x00000400)/*!<Bit 2 */
+#define RCC_CR_HSICAL_3 ((uint32_t)0x00000800)/*!<Bit 3 */
+#define RCC_CR_HSICAL_4 ((uint32_t)0x00001000)/*!<Bit 4 */
+#define RCC_CR_HSICAL_5 ((uint32_t)0x00002000)/*!<Bit 5 */
+#define RCC_CR_HSICAL_6 ((uint32_t)0x00004000)/*!<Bit 6 */
+#define RCC_CR_HSICAL_7 ((uint32_t)0x00008000)/*!<Bit 7 */
+
+#define RCC_CR_HSEON ((uint32_t)0x00010000)
+#define RCC_CR_HSERDY ((uint32_t)0x00020000)
+#define RCC_CR_HSEBYP ((uint32_t)0x00040000)
+#define RCC_CR_CSSON ((uint32_t)0x00080000)
+#define RCC_CR_PLLON ((uint32_t)0x01000000)
+#define RCC_CR_PLLRDY ((uint32_t)0x02000000)
+
+/******************** Bit definition for RCC_CFGR register ******************/
+/*!< SW configuration */
+#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */
+#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */
+#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */
+#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */
+
+/*!< SWS configuration */
+#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */
+#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */
+#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */
+#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */
+
+/*!< HPRE configuration */
+#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */
+#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */
+#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */
+#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */
+#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */
+#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */
+#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */
+#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */
+#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */
+#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */
+
+/*!< PPRE1 configuration */
+#define RCC_CFGR_PPRE1 ((uint32_t)0x00000700) /*!< PRE1[2:0] bits (APB1 prescaler) */
+#define RCC_CFGR_PPRE1_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_CFGR_PPRE1_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define RCC_CFGR_PPRE1_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE1_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE1_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE1_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE1_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE1_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */
+
+/*!< PPRE2 configuration */
+#define RCC_CFGR_PPRE2 ((uint32_t)0x00003800) /*!< PRE2[2:0] bits (APB2 prescaler) */
+#define RCC_CFGR_PPRE2_0 ((uint32_t)0x00000800) /*!< Bit 0 */
+#define RCC_CFGR_PPRE2_1 ((uint32_t)0x00001000) /*!< Bit 1 */
+#define RCC_CFGR_PPRE2_2 ((uint32_t)0x00002000) /*!< Bit 2 */
+
+#define RCC_CFGR_PPRE2_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */
+#define RCC_CFGR_PPRE2_DIV2 ((uint32_t)0x00002000) /*!< HCLK divided by 2 */
+#define RCC_CFGR_PPRE2_DIV4 ((uint32_t)0x00002800) /*!< HCLK divided by 4 */
+#define RCC_CFGR_PPRE2_DIV8 ((uint32_t)0x00003000) /*!< HCLK divided by 8 */
+#define RCC_CFGR_PPRE2_DIV16 ((uint32_t)0x00003800) /*!< HCLK divided by 16 */
+
+#define RCC_CFGR_PLLSRC ((uint32_t)0x00018000) /*!< PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSI_PREDIV ((uint32_t)0x00008000) /*!< HSI/PREDIV clock as PLL entry clock source */
+#define RCC_CFGR_PLLSRC_HSE_PREDIV ((uint32_t)0x00010000) /*!< HSE/PREDIV clock selected as PLL entry clock source */
+
+#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< HSE/PREDIV clock not divided for PLL entry */
+#define RCC_CFGR_PLLXTPRE_HSE_PREDIV_DIV2 ((uint32_t)0x00020000) /*!< HSE/PREDIV clock divided by 2 for PLL entry */
+
+/*!< PLLMUL configuration */
+#define RCC_CFGR_PLLMUL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */
+#define RCC_CFGR_PLLMUL_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define RCC_CFGR_PLLMUL_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define RCC_CFGR_PLLMUL_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+#define RCC_CFGR_PLLMUL_3 ((uint32_t)0x00200000) /*!< Bit 3 */
+
+#define RCC_CFGR_PLLMUL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */
+#define RCC_CFGR_PLLMUL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */
+#define RCC_CFGR_PLLMUL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */
+#define RCC_CFGR_PLLMUL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */
+#define RCC_CFGR_PLLMUL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */
+#define RCC_CFGR_PLLMUL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */
+#define RCC_CFGR_PLLMUL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */
+#define RCC_CFGR_PLLMUL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */
+#define RCC_CFGR_PLLMUL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */
+#define RCC_CFGR_PLLMUL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */
+#define RCC_CFGR_PLLMUL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */
+#define RCC_CFGR_PLLMUL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */
+#define RCC_CFGR_PLLMUL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */
+#define RCC_CFGR_PLLMUL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */
+#define RCC_CFGR_PLLMUL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */
+
+/*!< USB configuration */
+#define RCC_CFGR_USBPRE ((uint32_t)0x00400000) /*!< USB prescaler */
+
+#define RCC_CFGR_USBPRE_DIV1_5 ((uint32_t)0x00000000) /*!< USB prescaler is PLL clock divided by 1.5 */
+#define RCC_CFGR_USBPRE_DIV1 ((uint32_t)0x00400000) /*!< USB prescaler is PLL clock divided by 1 */
+
+/*!< I2S configuration */
+#define RCC_CFGR_I2SSRC ((uint32_t)0x00800000) /*!< I2S external clock source selection */
+
+#define RCC_CFGR_I2SSRC_SYSCLK ((uint32_t)0x00000000) /*!< System clock selected as I2S clock source */
+#define RCC_CFGR_I2SSRC_EXT ((uint32_t)0x00800000) /*!< External clock selected as I2S clock source */
+
+/*!< MCO configuration */
+#define RCC_CFGR_MCO ((uint32_t)0x07000000) /*!< MCO[2:0] bits (Microcontroller Clock Output) */
+#define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+
+#define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_CFGR_MCO_LSI ((uint32_t)0x02000000) /*!< LSI clock selected as MCO source */
+#define RCC_CFGR_MCO_LSE ((uint32_t)0x03000000) /*!< LSE clock selected as MCO source */
+#define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */
+#define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */
+#define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */
+#define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */
+
+#define RCC_CFGR_MCOF ((uint32_t)0x10000000) /*!< Microcontroller Clock Output Flag */
+
+#define RCC_CFGR_MCOPRE ((uint32_t)0x70000000) /*!< MCOPRE[3:0] bits (Microcontroller Clock Output Prescaler) */
+#define RCC_CFGR_MCOPRE_0 ((uint32_t)0x10000000) /*!< Bit 0 */
+#define RCC_CFGR_MCOPRE_1 ((uint32_t)0x20000000) /*!< Bit 1 */
+#define RCC_CFGR_MCOPRE_2 ((uint32_t)0x40000000) /*!< Bit 2 */
+
+#define RCC_CFGR_PLLNODIV ((uint32_t)0x80000000) /*!< PLL is not divided to MCO */
+
+/********************* Bit definition for RCC_CIR register ********************/
+#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */
+#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */
+#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */
+#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */
+#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */
+#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */
+#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */
+#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */
+#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */
+#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */
+#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */
+#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */
+#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */
+#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */
+#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */
+#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */
+#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */
+
+/****************** Bit definition for RCC_APB2RSTR register *****************/
+#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00000001) /*!< SYSCFG reset */
+#define RCC_APB2RSTR_TIM1RST ((uint32_t)0x00000800) /*!< TIM1 reset */
+#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI1 reset */
+#define RCC_APB2RSTR_TIM8RST ((uint32_t)0x00002000) /*!< TIM8 reset */
+#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 reset */
+#define RCC_APB2RSTR_SPI4RST ((uint32_t)0x00008000) /*!< SPI4 reset */
+#define RCC_APB2RSTR_TIM15RST ((uint32_t)0x00010000) /*!< TIM15 reset */
+#define RCC_APB2RSTR_TIM16RST ((uint32_t)0x00020000) /*!< TIM16 reset */
+#define RCC_APB2RSTR_TIM17RST ((uint32_t)0x00040000) /*!< TIM17 reset */
+#define RCC_APB2RSTR_TIM20RST ((uint32_t)0x00100000) /*!< TIM20 reset */
+
+/****************** Bit definition for RCC_APB1RSTR register ******************/
+#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 reset */
+#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 reset */
+#define RCC_APB1RSTR_TIM4RST ((uint32_t)0x00000004) /*!< Timer 4 reset */
+#define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 reset */
+#define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 reset */
+#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog reset */
+#define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI2 reset */
+#define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00008000) /*!< SPI3 reset */
+#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 reset */
+#define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< USART 3 reset */
+#define RCC_APB1RSTR_UART4RST ((uint32_t)0x00080000) /*!< UART 4 reset */
+#define RCC_APB1RSTR_UART5RST ((uint32_t)0x00100000) /*!< UART 5 reset */
+#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 reset */
+#define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 reset */
+#define RCC_APB1RSTR_USBRST ((uint32_t)0x00800000) /*!< USB reset */
+#define RCC_APB1RSTR_CANRST ((uint32_t)0x02000000) /*!< CAN reset */
+#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< PWR reset */
+#define RCC_APB1RSTR_DAC1RST ((uint32_t)0x20000000) /*!< DAC 1 reset */
+#define RCC_APB1RSTR_I2C3RST ((uint32_t)0x40000000) /*!< I2C 3 reset */
+
+/****************** Bit definition for RCC_AHBENR register ******************/
+#define RCC_AHBENR_DMA1EN ((uint32_t)0x00000001) /*!< DMA1 clock enable */
+#define RCC_AHBENR_DMA2EN ((uint32_t)0x00000002) /*!< DMA2 clock enable */
+#define RCC_AHBENR_SRAMEN ((uint32_t)0x00000004) /*!< SRAM interface clock enable */
+#define RCC_AHBENR_FLITFEN ((uint32_t)0x00000010) /*!< FLITF clock enable */
+#define RCC_AHBENR_FMCEN ((uint32_t)0x00000020) /*!< FMC clock enable */
+#define RCC_AHBENR_CRCEN ((uint32_t)0x00000040) /*!< CRC clock enable */
+#define RCC_AHBENR_GPIOHEN ((uint32_t)0x00010000) /*!< GPIOH clock enable */
+#define RCC_AHBENR_GPIOAEN ((uint32_t)0x00020000) /*!< GPIOA clock enable */
+#define RCC_AHBENR_GPIOBEN ((uint32_t)0x00040000) /*!< GPIOB clock enable */
+#define RCC_AHBENR_GPIOCEN ((uint32_t)0x00080000) /*!< GPIOC clock enable */
+#define RCC_AHBENR_GPIODEN ((uint32_t)0x00100000) /*!< GPIOD clock enable */
+#define RCC_AHBENR_GPIOEEN ((uint32_t)0x00200000) /*!< GPIOE clock enable */
+#define RCC_AHBENR_GPIOFEN ((uint32_t)0x00400000) /*!< GPIOF clock enable */
+#define RCC_AHBENR_GPIOGEN ((uint32_t)0x00800000) /*!< GPIOG clock enable */
+#define RCC_AHBENR_TSCEN ((uint32_t)0x01000000) /*!< TS clock enable */
+#define RCC_AHBENR_ADC12EN ((uint32_t)0x10000000) /*!< ADC1/ ADC2 clock enable */
+#define RCC_AHBENR_ADC34EN ((uint32_t)0x20000000) /*!< ADC3/ ADC4 clock enable */
+
+/***************** Bit definition for RCC_APB2ENR register ******************/
+#define RCC_APB2ENR_SYSCFGEN ((uint32_t)0x00000001) /*!< SYSCFG clock enable */
+#define RCC_APB2ENR_TIM1EN ((uint32_t)0x00000800) /*!< TIM1 clock enable */
+#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI1 clock enable */
+#define RCC_APB2ENR_TIM8EN ((uint32_t)0x00002000) /*!< TIM8 clock enable */
+#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */
+#define RCC_APB2ENR_SPI4EN ((uint32_t)0x00008000) /*!< SPI4 clock enable */
+#define RCC_APB2ENR_TIM15EN ((uint32_t)0x00010000) /*!< TIM15 clock enable */
+#define RCC_APB2ENR_TIM16EN ((uint32_t)0x00020000) /*!< TIM16 clock enable */
+#define RCC_APB2ENR_TIM17EN ((uint32_t)0x00040000) /*!< TIM17 clock enable */
+#define RCC_APB2ENR_TIM20EN ((uint32_t)0x00100000) /*!< TIM20 clock enable */
+
+/****************** Bit definition for RCC_APB1ENR register ******************/
+#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enable */
+#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */
+#define RCC_APB1ENR_TIM4EN ((uint32_t)0x00000004) /*!< Timer 4 clock enable */
+#define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */
+#define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */
+#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */
+#define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI2 clock enable */
+#define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000) /*!< SPI3 clock enable */
+#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART 2 clock enable */
+#define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000) /*!< USART 3 clock enable */
+#define RCC_APB1ENR_UART4EN ((uint32_t)0x00080000) /*!< UART 4 clock enable */
+#define RCC_APB1ENR_UART5EN ((uint32_t)0x00100000) /*!< UART 5 clock enable */
+#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C 1 clock enable */
+#define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C 2 clock enable */
+#define RCC_APB1ENR_USBEN ((uint32_t)0x00800000) /*!< USB clock enable */
+#define RCC_APB1ENR_CANEN ((uint32_t)0x02000000) /*!< CAN clock enable */
+#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< PWR clock enable */
+#define RCC_APB1ENR_DAC1EN ((uint32_t)0x20000000) /*!< DAC 1 clock enable */
+#define RCC_APB1ENR_I2C3EN ((uint32_t)0x40000000) /*!< I2C 3 clock enable */
+
+/******************** Bit definition for RCC_BDCR register ******************/
+#define RCC_BDCR_LSE ((uint32_t)0x00000007) /*!< External Low Speed oscillator [2:0] bits */
+#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */
+#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */
+#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */
+
+#define RCC_BDCR_LSEDRV ((uint32_t)0x00000018) /*!< LSEDRV[1:0] bits (LSE Osc. drive capability) */
+#define RCC_BDCR_LSEDRV_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define RCC_BDCR_LSEDRV_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+
+#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */
+#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+
+/*!< RTC configuration */
+#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */
+#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */
+#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 32 used as RTC clock */
+
+#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */
+#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */
+
+/******************** Bit definition for RCC_CSR register *******************/
+#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */
+#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */
+#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */
+#define RCC_CSR_OBLRSTF ((uint32_t)0x02000000) /*!< OBL reset flag */
+#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */
+#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */
+#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */
+#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */
+#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */
+#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */
+
+/******************* Bit definition for RCC_AHBRSTR register ****************/
+#define RCC_AHBRSTR_FMCRST ((uint32_t)0x00000020) /*!< FMC reset */
+#define RCC_AHBRSTR_GPIOHRST ((uint32_t)0x00010000) /*!< GPIOH reset */
+#define RCC_AHBRSTR_GPIOARST ((uint32_t)0x00020000) /*!< GPIOA reset */
+#define RCC_AHBRSTR_GPIOBRST ((uint32_t)0x00040000) /*!< GPIOB reset */
+#define RCC_AHBRSTR_GPIOCRST ((uint32_t)0x00080000) /*!< GPIOC reset */
+#define RCC_AHBRSTR_GPIODRST ((uint32_t)0x00100000) /*!< GPIOD reset */
+#define RCC_AHBRSTR_GPIOERST ((uint32_t)0x00200000) /*!< GPIOE reset */
+#define RCC_AHBRSTR_GPIOFRST ((uint32_t)0x00400000) /*!< GPIOF reset */
+#define RCC_AHBRSTR_GPIOGRST ((uint32_t)0x00800000) /*!< GPIOG reset */
+#define RCC_AHBRSTR_TSCRST ((uint32_t)0x01000000) /*!< TSC reset */
+#define RCC_AHBRSTR_ADC12RST ((uint32_t)0x10000000) /*!< ADC1 & ADC2 reset */
+#define RCC_AHBRSTR_ADC34RST ((uint32_t)0x20000000) /*!< ADC3 & ADC4 reset */
+
+/******************* Bit definition for RCC_CFGR2 register ******************/
+/*!< PREDIV configuration */
+#define RCC_CFGR2_PREDIV ((uint32_t)0x0000000F) /*!< PREDIV[3:0] bits */
+#define RCC_CFGR2_PREDIV_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR2_PREDIV_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RCC_CFGR2_PREDIV_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RCC_CFGR2_PREDIV_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define RCC_CFGR2_PREDIV_DIV1 ((uint32_t)0x00000000) /*!< PREDIV input clock not divided */
+#define RCC_CFGR2_PREDIV_DIV2 ((uint32_t)0x00000001) /*!< PREDIV input clock divided by 2 */
+#define RCC_CFGR2_PREDIV_DIV3 ((uint32_t)0x00000002) /*!< PREDIV input clock divided by 3 */
+#define RCC_CFGR2_PREDIV_DIV4 ((uint32_t)0x00000003) /*!< PREDIV input clock divided by 4 */
+#define RCC_CFGR2_PREDIV_DIV5 ((uint32_t)0x00000004) /*!< PREDIV input clock divided by 5 */
+#define RCC_CFGR2_PREDIV_DIV6 ((uint32_t)0x00000005) /*!< PREDIV input clock divided by 6 */
+#define RCC_CFGR2_PREDIV_DIV7 ((uint32_t)0x00000006) /*!< PREDIV input clock divided by 7 */
+#define RCC_CFGR2_PREDIV_DIV8 ((uint32_t)0x00000007) /*!< PREDIV input clock divided by 8 */
+#define RCC_CFGR2_PREDIV_DIV9 ((uint32_t)0x00000008) /*!< PREDIV input clock divided by 9 */
+#define RCC_CFGR2_PREDIV_DIV10 ((uint32_t)0x00000009) /*!< PREDIV input clock divided by 10 */
+#define RCC_CFGR2_PREDIV_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV input clock divided by 11 */
+#define RCC_CFGR2_PREDIV_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV input clock divided by 12 */
+#define RCC_CFGR2_PREDIV_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV input clock divided by 13 */
+#define RCC_CFGR2_PREDIV_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV input clock divided by 14 */
+#define RCC_CFGR2_PREDIV_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV input clock divided by 15 */
+#define RCC_CFGR2_PREDIV_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV input clock divided by 16 */
+
+/*!< ADCPRE12 configuration */
+#define RCC_CFGR2_ADCPRE12 ((uint32_t)0x000001F0) /*!< ADCPRE12[8:4] bits */
+#define RCC_CFGR2_ADCPRE12_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define RCC_CFGR2_ADCPRE12_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define RCC_CFGR2_ADCPRE12_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define RCC_CFGR2_ADCPRE12_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+#define RCC_CFGR2_ADCPRE12_4 ((uint32_t)0x00000100) /*!< Bit 4 */
+
+#define RCC_CFGR2_ADCPRE12_NO ((uint32_t)0x00000000) /*!< ADC12 clock disabled, ADC12 can use AHB clock */
+#define RCC_CFGR2_ADCPRE12_DIV1 ((uint32_t)0x00000100) /*!< ADC12 PLL clock divided by 1 */
+#define RCC_CFGR2_ADCPRE12_DIV2 ((uint32_t)0x00000110) /*!< ADC12 PLL clock divided by 2 */
+#define RCC_CFGR2_ADCPRE12_DIV4 ((uint32_t)0x00000120) /*!< ADC12 PLL clock divided by 4 */
+#define RCC_CFGR2_ADCPRE12_DIV6 ((uint32_t)0x00000130) /*!< ADC12 PLL clock divided by 6 */
+#define RCC_CFGR2_ADCPRE12_DIV8 ((uint32_t)0x00000140) /*!< ADC12 PLL clock divided by 8 */
+#define RCC_CFGR2_ADCPRE12_DIV10 ((uint32_t)0x00000150) /*!< ADC12 PLL clock divided by 10 */
+#define RCC_CFGR2_ADCPRE12_DIV12 ((uint32_t)0x00000160) /*!< ADC12 PLL clock divided by 12 */
+#define RCC_CFGR2_ADCPRE12_DIV16 ((uint32_t)0x00000170) /*!< ADC12 PLL clock divided by 16 */
+#define RCC_CFGR2_ADCPRE12_DIV32 ((uint32_t)0x00000180) /*!< ADC12 PLL clock divided by 32 */
+#define RCC_CFGR2_ADCPRE12_DIV64 ((uint32_t)0x00000190) /*!< ADC12 PLL clock divided by 64 */
+#define RCC_CFGR2_ADCPRE12_DIV128 ((uint32_t)0x000001A0) /*!< ADC12 PLL clock divided by 128 */
+#define RCC_CFGR2_ADCPRE12_DIV256 ((uint32_t)0x000001B0) /*!< ADC12 PLL clock divided by 256 */
+
+/*!< ADCPRE34 configuration */
+#define RCC_CFGR2_ADCPRE34 ((uint32_t)0x00003E00) /*!< ADCPRE34[13:5] bits */
+#define RCC_CFGR2_ADCPRE34_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define RCC_CFGR2_ADCPRE34_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define RCC_CFGR2_ADCPRE34_2 ((uint32_t)0x00000800) /*!< Bit 2 */
+#define RCC_CFGR2_ADCPRE34_3 ((uint32_t)0x00001000) /*!< Bit 3 */
+#define RCC_CFGR2_ADCPRE34_4 ((uint32_t)0x00002000) /*!< Bit 4 */
+
+#define RCC_CFGR2_ADCPRE34_NO ((uint32_t)0x00000000) /*!< ADC34 clock disabled, ADC34 can use AHB clock */
+#define RCC_CFGR2_ADCPRE34_DIV1 ((uint32_t)0x00002000) /*!< ADC34 PLL clock divided by 1 */
+#define RCC_CFGR2_ADCPRE34_DIV2 ((uint32_t)0x00002200) /*!< ADC34 PLL clock divided by 2 */
+#define RCC_CFGR2_ADCPRE34_DIV4 ((uint32_t)0x00002400) /*!< ADC34 PLL clock divided by 4 */
+#define RCC_CFGR2_ADCPRE34_DIV6 ((uint32_t)0x00002600) /*!< ADC34 PLL clock divided by 6 */
+#define RCC_CFGR2_ADCPRE34_DIV8 ((uint32_t)0x00002800) /*!< ADC34 PLL clock divided by 8 */
+#define RCC_CFGR2_ADCPRE34_DIV10 ((uint32_t)0x00002A00) /*!< ADC34 PLL clock divided by 10 */
+#define RCC_CFGR2_ADCPRE34_DIV12 ((uint32_t)0x00002C00) /*!< ADC34 PLL clock divided by 12 */
+#define RCC_CFGR2_ADCPRE34_DIV16 ((uint32_t)0x00002E00) /*!< ADC34 PLL clock divided by 16 */
+#define RCC_CFGR2_ADCPRE34_DIV32 ((uint32_t)0x00003000) /*!< ADC34 PLL clock divided by 32 */
+#define RCC_CFGR2_ADCPRE34_DIV64 ((uint32_t)0x00003200) /*!< ADC34 PLL clock divided by 64 */
+#define RCC_CFGR2_ADCPRE34_DIV128 ((uint32_t)0x00003400) /*!< ADC34 PLL clock divided by 128 */
+#define RCC_CFGR2_ADCPRE34_DIV256 ((uint32_t)0x00003600) /*!< ADC34 PLL clock divided by 256 */
+
+/******************* Bit definition for RCC_CFGR3 register ******************/
+#define RCC_CFGR3_USART1SW ((uint32_t)0x00000003) /*!< USART1SW[1:0] bits */
+#define RCC_CFGR3_USART1SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RCC_CFGR3_USART1SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART1SW_PCLK ((uint32_t)0x00000000) /*!< PCLK1 clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_SYSCLK ((uint32_t)0x00000001) /*!< System clock selected as USART1 clock source */
+#define RCC_CFGR3_USART1SW_LSE ((uint32_t)0x00000002) /*!< LSE oscillator clock used as USART1 clock source */
+#define RCC_CFGR3_USART1SW_HSI ((uint32_t)0x00000003) /*!< HSI oscillator clock used as USART1 clock source */
+
+#define RCC_CFGR3_I2CSW ((uint32_t)0x00000070) /*!< I2CSW bits */
+#define RCC_CFGR3_I2C1SW ((uint32_t)0x00000010) /*!< I2C1SW bits */
+#define RCC_CFGR3_I2C2SW ((uint32_t)0x00000020) /*!< I2C2SW bits */
+#define RCC_CFGR3_I2C3SW ((uint32_t)0x00000040) /*!< I2C3SW bits */
+
+#define RCC_CFGR3_I2C1SW_HSI ((uint32_t)0x00000000) /*!< HSI oscillator clock used as I2C1 clock source */
+#define RCC_CFGR3_I2C1SW_SYSCLK ((uint32_t)0x00000010) /*!< System clock selected as I2C1 clock source */
+#define RCC_CFGR3_I2C2SW_HSI ((uint32_t)0x00000000) /*!< HSI oscillator clock used as I2C2 clock source */
+#define RCC_CFGR3_I2C2SW_SYSCLK ((uint32_t)0x00000020) /*!< System clock selected as I2C2 clock source */
+#define RCC_CFGR3_I2C3SW_HSI ((uint32_t)0x00000000) /*!< HSI oscillator clock used as I2C3 clock source */
+#define RCC_CFGR3_I2C3SW_SYSCLK ((uint32_t)0x00000040) /*!< System clock selected as I2C3 clock source */
+
+#define RCC_CFGR3_TIMSW ((uint32_t)0x0000AF00) /*!< TIMSW bits */
+#define RCC_CFGR3_TIM1SW ((uint32_t)0x00000100) /*!< TIM1SW bits */
+#define RCC_CFGR3_TIM8SW ((uint32_t)0x00000200) /*!< TIM8SW bits */
+#define RCC_CFGR3_TIM15SW ((uint32_t)0x00000400) /*!< TIM15SW bits */
+#define RCC_CFGR3_TIM16SW ((uint32_t)0x00000800) /*!< TIM16SW bits */
+#define RCC_CFGR3_TIM17SW ((uint32_t)0x00002000) /*!< TIM17SW bits */
+#define RCC_CFGR3_TIM20SW ((uint32_t)0x00008000) /*!< TIM20SW bits */
+#define RCC_CFGR3_TIM2SW ((uint32_t)0x01000000) /*!< TIM2SW bits */
+#define RCC_CFGR3_TIM34SW ((uint32_t)0x02000000) /*!< TIM34SW bits */
+
+#define RCC_CFGR3_TIM1SW_HCLK ((uint32_t)0x00000000) /*!< HCLK used as TIM1 clock source */
+#define RCC_CFGR3_TIM1SW_PLL ((uint32_t)0x00000100) /*!< PLL clock used as TIM1 clock source */
+
+#define RCC_CFGR3_TIM8SW_HCLK ((uint32_t)0x00000000) /*!< HCLK used as TIM8 clock source */
+#define RCC_CFGR3_TIM8SW_PLL ((uint32_t)0x00000200) /*!< PLL clock used as TIM8 clock source */
+
+#define RCC_CFGR3_TIM15SW_HCLK ((uint32_t)0x00000000) /*!< HCLK used as TIM15 clock source */
+#define RCC_CFGR3_TIM15SW_PLL ((uint32_t)0x00000400) /*!< PLL clock used as TIM15 clock source */
+
+#define RCC_CFGR3_TIM16SW_HCLK ((uint32_t)0x00000000) /*!< HCLK used as TIM16 clock source */
+#define RCC_CFGR3_TIM16SW_PLL ((uint32_t)0x00000800) /*!< PLL clock used as TIM16 clock source */
+
+#define RCC_CFGR3_TIM17SW_HCLK ((uint32_t)0x00000000) /*!< HCLK used as TIM17 clock source */
+#define RCC_CFGR3_TIM17SW_PLL ((uint32_t)0x00002000) /*!< PLL clock used as TIM17 clock source */
+
+#define RCC_CFGR3_TIM20SW_HCLK ((uint32_t)0x00000000) /*!< HCLK used as TIM20 clock source */
+#define RCC_CFGR3_TIM20SW_PLL ((uint32_t)0x00008000) /*!< PLL clock used as TIM20 clock source */
+
+#define RCC_CFGR3_USART2SW ((uint32_t)0x00030000) /*!< USART2SW[1:0] bits */
+#define RCC_CFGR3_USART2SW_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define RCC_CFGR3_USART2SW_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART2SW_PCLK ((uint32_t)0x00000000) /*!< PCLK2 clock used as USART2 clock source */
+#define RCC_CFGR3_USART2SW_SYSCLK ((uint32_t)0x00010000) /*!< System clock selected as USART2 clock source */
+#define RCC_CFGR3_USART2SW_LSE ((uint32_t)0x00020000) /*!< LSE oscillator clock used as USART2 clock source */
+#define RCC_CFGR3_USART2SW_HSI ((uint32_t)0x00030000) /*!< HSI oscillator clock used as USART2 clock source */
+
+#define RCC_CFGR3_USART3SW ((uint32_t)0x000C0000) /*!< USART3SW[1:0] bits */
+#define RCC_CFGR3_USART3SW_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define RCC_CFGR3_USART3SW_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+
+#define RCC_CFGR3_USART3SW_PCLK ((uint32_t)0x00000000) /*!< PCLK2 clock used as USART3 clock source */
+#define RCC_CFGR3_USART3SW_SYSCLK ((uint32_t)0x00040000) /*!< System clock selected as USART3 clock source */
+#define RCC_CFGR3_USART3SW_LSE ((uint32_t)0x00080000) /*!< LSE oscillator clock used as USART3 clock source */
+#define RCC_CFGR3_USART3SW_HSI ((uint32_t)0x000C0000) /*!< HSI oscillator clock used as USART3 clock source */
+
+#define RCC_CFGR3_UART4SW ((uint32_t)0x00300000) /*!< UART4SW[1:0] bits */
+#define RCC_CFGR3_UART4SW_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define RCC_CFGR3_UART4SW_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+
+#define RCC_CFGR3_UART4SW_PCLK ((uint32_t)0x00000000) /*!< PCLK2 clock used as UART4 clock source */
+#define RCC_CFGR3_UART4SW_SYSCLK ((uint32_t)0x00100000) /*!< System clock selected as UART4 clock source */
+#define RCC_CFGR3_UART4SW_LSE ((uint32_t)0x00200000) /*!< LSE oscillator clock used as UART4 clock source */
+#define RCC_CFGR3_UART4SW_HSI ((uint32_t)0x00300000) /*!< HSI oscillator clock used as UART4 clock source */
+
+#define RCC_CFGR3_UART5SW ((uint32_t)0x00C00000) /*!< UART5SW[1:0] bits */
+#define RCC_CFGR3_UART5SW_0 ((uint32_t)0x00400000) /*!< Bit 0 */
+#define RCC_CFGR3_UART5SW_1 ((uint32_t)0x00800000) /*!< Bit 1 */
+
+#define RCC_CFGR3_UART5SW_PCLK ((uint32_t)0x00000000) /*!< PCLK2 clock used as UART5 clock source */
+#define RCC_CFGR3_UART5SW_SYSCLK ((uint32_t)0x00400000) /*!< System clock selected as UART5 clock source */
+#define RCC_CFGR3_UART5SW_LSE ((uint32_t)0x00800000) /*!< LSE oscillator clock used as UART5 clock source */
+#define RCC_CFGR3_UART5SW_HSI ((uint32_t)0x00C00000) /*!< HSI oscillator clock used as UART5 clock source */
+
+#define RCC_CFGR3_TIM2SW_HCLK ((uint32_t)0x00000000) /*!< HCLK used as TIM2 clock source */
+#define RCC_CFGR3_TIM2SW_PLL ((uint32_t)0x01000000) /*!< PLL clock used as TIM2 clock source */
+
+#define RCC_CFGR3_TIM34SW_HCLK ((uint32_t)0x00000000) /*!< HCLK used as TIM3/TIM4 clock source */
+#define RCC_CFGR3_TIM34SW_PLL ((uint32_t)0x02000000) /*!< PLL clock used as TIM3/TIM4 clock source */
+
+/******************************************************************************/
+/* */
+/* Real-Time Clock (RTC) */
+/* */
+/******************************************************************************/
+/******************** Bits definition for RTC_TR register *******************/
+#define RTC_TR_PM ((uint32_t)0x00400000)
+#define RTC_TR_HT ((uint32_t)0x00300000)
+#define RTC_TR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TR_HU ((uint32_t)0x000F0000)
+#define RTC_TR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TR_MNT ((uint32_t)0x00007000)
+#define RTC_TR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TR_MNU ((uint32_t)0x00000F00)
+#define RTC_TR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TR_ST ((uint32_t)0x00000070)
+#define RTC_TR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TR_SU ((uint32_t)0x0000000F)
+#define RTC_TR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_DR register *******************/
+#define RTC_DR_YT ((uint32_t)0x00F00000)
+#define RTC_DR_YT_0 ((uint32_t)0x00100000)
+#define RTC_DR_YT_1 ((uint32_t)0x00200000)
+#define RTC_DR_YT_2 ((uint32_t)0x00400000)
+#define RTC_DR_YT_3 ((uint32_t)0x00800000)
+#define RTC_DR_YU ((uint32_t)0x000F0000)
+#define RTC_DR_YU_0 ((uint32_t)0x00010000)
+#define RTC_DR_YU_1 ((uint32_t)0x00020000)
+#define RTC_DR_YU_2 ((uint32_t)0x00040000)
+#define RTC_DR_YU_3 ((uint32_t)0x00080000)
+#define RTC_DR_WDU ((uint32_t)0x0000E000)
+#define RTC_DR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_DR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_DR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_DR_MT ((uint32_t)0x00001000)
+#define RTC_DR_MU ((uint32_t)0x00000F00)
+#define RTC_DR_MU_0 ((uint32_t)0x00000100)
+#define RTC_DR_MU_1 ((uint32_t)0x00000200)
+#define RTC_DR_MU_2 ((uint32_t)0x00000400)
+#define RTC_DR_MU_3 ((uint32_t)0x00000800)
+#define RTC_DR_DT ((uint32_t)0x00000030)
+#define RTC_DR_DT_0 ((uint32_t)0x00000010)
+#define RTC_DR_DT_1 ((uint32_t)0x00000020)
+#define RTC_DR_DU ((uint32_t)0x0000000F)
+#define RTC_DR_DU_0 ((uint32_t)0x00000001)
+#define RTC_DR_DU_1 ((uint32_t)0x00000002)
+#define RTC_DR_DU_2 ((uint32_t)0x00000004)
+#define RTC_DR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_CR register *******************/
+#define RTC_CR_COE ((uint32_t)0x00800000)
+#define RTC_CR_OSEL ((uint32_t)0x00600000)
+#define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
+#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
+#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_COSEL ((uint32_t)0x00080000)
+#define RTC_CR_BCK ((uint32_t)0x00040000)
+#define RTC_CR_SUB1H ((uint32_t)0x00020000)
+#define RTC_CR_ADD1H ((uint32_t)0x00010000)
+#define RTC_CR_TSIE ((uint32_t)0x00008000)
+#define RTC_CR_WUTIE ((uint32_t)0x00004000)
+#define RTC_CR_ALRBIE ((uint32_t)0x00002000)
+#define RTC_CR_ALRAIE ((uint32_t)0x00001000)
+#define RTC_CR_TSE ((uint32_t)0x00000800)
+#define RTC_CR_WUTE ((uint32_t)0x00000400)
+#define RTC_CR_ALRBE ((uint32_t)0x00000200)
+#define RTC_CR_ALRAE ((uint32_t)0x00000100)
+#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
+#define RTC_CR_REFCKON ((uint32_t)0x00000010)
+#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
+#define RTC_CR_WUCKSEL ((uint32_t)0x00000007)
+#define RTC_CR_WUCKSEL_0 ((uint32_t)0x00000001)
+#define RTC_CR_WUCKSEL_1 ((uint32_t)0x00000002)
+#define RTC_CR_WUCKSEL_2 ((uint32_t)0x00000004)
+
+/******************** Bits definition for RTC_ISR register ******************/
+#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP3F ((uint32_t)0x00008000)
+#define RTC_ISR_TAMP2F ((uint32_t)0x00004000)
+#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
+#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
+#define RTC_ISR_TSF ((uint32_t)0x00000800)
+#define RTC_ISR_WUTF ((uint32_t)0x00000400)
+#define RTC_ISR_ALRBF ((uint32_t)0x00000200)
+#define RTC_ISR_ALRAF ((uint32_t)0x00000100)
+#define RTC_ISR_INIT ((uint32_t)0x00000080)
+#define RTC_ISR_INITF ((uint32_t)0x00000040)
+#define RTC_ISR_RSF ((uint32_t)0x00000020)
+#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF ((uint32_t)0x00000008)
+#define RTC_ISR_WUTWF ((uint32_t)0x00000004)
+#define RTC_ISR_ALRBWF ((uint32_t)0x00000002)
+#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_PRER register *****************/
+#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_WUTR register *****************/
+#define RTC_WUTR_WUT ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_ALRMAR register ***************/
+#define RTC_ALRMAR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMAR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMAR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMAR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMAR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMAR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMAR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMAR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMAR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMAR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMAR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMAR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMAR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMAR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMAR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMAR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMAR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMAR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMAR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMAR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMAR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMAR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMAR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMAR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMAR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMAR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMAR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMAR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMAR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMAR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMAR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMAR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMAR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMAR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMAR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMAR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMAR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMAR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMAR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMAR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_ALRMBR register ***************/
+#define RTC_ALRMBR_MSK4 ((uint32_t)0x80000000)
+#define RTC_ALRMBR_WDSEL ((uint32_t)0x40000000)
+#define RTC_ALRMBR_DT ((uint32_t)0x30000000)
+#define RTC_ALRMBR_DT_0 ((uint32_t)0x10000000)
+#define RTC_ALRMBR_DT_1 ((uint32_t)0x20000000)
+#define RTC_ALRMBR_DU ((uint32_t)0x0F000000)
+#define RTC_ALRMBR_DU_0 ((uint32_t)0x01000000)
+#define RTC_ALRMBR_DU_1 ((uint32_t)0x02000000)
+#define RTC_ALRMBR_DU_2 ((uint32_t)0x04000000)
+#define RTC_ALRMBR_DU_3 ((uint32_t)0x08000000)
+#define RTC_ALRMBR_MSK3 ((uint32_t)0x00800000)
+#define RTC_ALRMBR_PM ((uint32_t)0x00400000)
+#define RTC_ALRMBR_HT ((uint32_t)0x00300000)
+#define RTC_ALRMBR_HT_0 ((uint32_t)0x00100000)
+#define RTC_ALRMBR_HT_1 ((uint32_t)0x00200000)
+#define RTC_ALRMBR_HU ((uint32_t)0x000F0000)
+#define RTC_ALRMBR_HU_0 ((uint32_t)0x00010000)
+#define RTC_ALRMBR_HU_1 ((uint32_t)0x00020000)
+#define RTC_ALRMBR_HU_2 ((uint32_t)0x00040000)
+#define RTC_ALRMBR_HU_3 ((uint32_t)0x00080000)
+#define RTC_ALRMBR_MSK2 ((uint32_t)0x00008000)
+#define RTC_ALRMBR_MNT ((uint32_t)0x00007000)
+#define RTC_ALRMBR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_ALRMBR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_ALRMBR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_ALRMBR_MNU ((uint32_t)0x00000F00)
+#define RTC_ALRMBR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_ALRMBR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_ALRMBR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_ALRMBR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_ALRMBR_MSK1 ((uint32_t)0x00000080)
+#define RTC_ALRMBR_ST ((uint32_t)0x00000070)
+#define RTC_ALRMBR_ST_0 ((uint32_t)0x00000010)
+#define RTC_ALRMBR_ST_1 ((uint32_t)0x00000020)
+#define RTC_ALRMBR_ST_2 ((uint32_t)0x00000040)
+#define RTC_ALRMBR_SU ((uint32_t)0x0000000F)
+#define RTC_ALRMBR_SU_0 ((uint32_t)0x00000001)
+#define RTC_ALRMBR_SU_1 ((uint32_t)0x00000002)
+#define RTC_ALRMBR_SU_2 ((uint32_t)0x00000004)
+#define RTC_ALRMBR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_WPR register ******************/
+#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+
+/******************** Bits definition for RTC_SSR register ******************/
+#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_SHIFTR register ***************/
+#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
+
+/******************** Bits definition for RTC_TSTR register *****************/
+#define RTC_TSTR_PM ((uint32_t)0x00400000)
+#define RTC_TSTR_HT ((uint32_t)0x00300000)
+#define RTC_TSTR_HT_0 ((uint32_t)0x00100000)
+#define RTC_TSTR_HT_1 ((uint32_t)0x00200000)
+#define RTC_TSTR_HU ((uint32_t)0x000F0000)
+#define RTC_TSTR_HU_0 ((uint32_t)0x00010000)
+#define RTC_TSTR_HU_1 ((uint32_t)0x00020000)
+#define RTC_TSTR_HU_2 ((uint32_t)0x00040000)
+#define RTC_TSTR_HU_3 ((uint32_t)0x00080000)
+#define RTC_TSTR_MNT ((uint32_t)0x00007000)
+#define RTC_TSTR_MNT_0 ((uint32_t)0x00001000)
+#define RTC_TSTR_MNT_1 ((uint32_t)0x00002000)
+#define RTC_TSTR_MNT_2 ((uint32_t)0x00004000)
+#define RTC_TSTR_MNU ((uint32_t)0x00000F00)
+#define RTC_TSTR_MNU_0 ((uint32_t)0x00000100)
+#define RTC_TSTR_MNU_1 ((uint32_t)0x00000200)
+#define RTC_TSTR_MNU_2 ((uint32_t)0x00000400)
+#define RTC_TSTR_MNU_3 ((uint32_t)0x00000800)
+#define RTC_TSTR_ST ((uint32_t)0x00000070)
+#define RTC_TSTR_ST_0 ((uint32_t)0x00000010)
+#define RTC_TSTR_ST_1 ((uint32_t)0x00000020)
+#define RTC_TSTR_ST_2 ((uint32_t)0x00000040)
+#define RTC_TSTR_SU ((uint32_t)0x0000000F)
+#define RTC_TSTR_SU_0 ((uint32_t)0x00000001)
+#define RTC_TSTR_SU_1 ((uint32_t)0x00000002)
+#define RTC_TSTR_SU_2 ((uint32_t)0x00000004)
+#define RTC_TSTR_SU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSDR register *****************/
+#define RTC_TSDR_WDU ((uint32_t)0x0000E000)
+#define RTC_TSDR_WDU_0 ((uint32_t)0x00002000)
+#define RTC_TSDR_WDU_1 ((uint32_t)0x00004000)
+#define RTC_TSDR_WDU_2 ((uint32_t)0x00008000)
+#define RTC_TSDR_MT ((uint32_t)0x00001000)
+#define RTC_TSDR_MU ((uint32_t)0x00000F00)
+#define RTC_TSDR_MU_0 ((uint32_t)0x00000100)
+#define RTC_TSDR_MU_1 ((uint32_t)0x00000200)
+#define RTC_TSDR_MU_2 ((uint32_t)0x00000400)
+#define RTC_TSDR_MU_3 ((uint32_t)0x00000800)
+#define RTC_TSDR_DT ((uint32_t)0x00000030)
+#define RTC_TSDR_DT_0 ((uint32_t)0x00000010)
+#define RTC_TSDR_DT_1 ((uint32_t)0x00000020)
+#define RTC_TSDR_DU ((uint32_t)0x0000000F)
+#define RTC_TSDR_DU_0 ((uint32_t)0x00000001)
+#define RTC_TSDR_DU_1 ((uint32_t)0x00000002)
+#define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
+#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+
+/******************** Bits definition for RTC_TSSSR register ****************/
+#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CAL register *****************/
+#define RTC_CALR_CALP ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
+#define RTC_CALR_CALM ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
+
+/******************** Bits definition for RTC_TAFCR register ****************/
+#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMP3TRG ((uint32_t)0x00000040)
+#define RTC_TAFCR_TAMP3E ((uint32_t)0x00000020)
+#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010)
+#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008)
+#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
+#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
+#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+
+/******************** Bits definition for RTC_ALRMASSR register *************/
+#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_ALRMBSSR register *************/
+#define RTC_ALRMBSSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMBSSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMBSSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMBSSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMBSSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMBSSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_BKP0R register ****************/
+#define RTC_BKP0R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP1R register ****************/
+#define RTC_BKP1R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP2R register ****************/
+#define RTC_BKP2R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP3R register ****************/
+#define RTC_BKP3R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP4R register ****************/
+#define RTC_BKP4R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP5R register ****************/
+#define RTC_BKP5R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP6R register ****************/
+#define RTC_BKP6R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP7R register ****************/
+#define RTC_BKP7R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP8R register ****************/
+#define RTC_BKP8R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP9R register ****************/
+#define RTC_BKP9R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP10R register ***************/
+#define RTC_BKP10R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP11R register ***************/
+#define RTC_BKP11R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP12R register ***************/
+#define RTC_BKP12R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP13R register ***************/
+#define RTC_BKP13R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP14R register ***************/
+#define RTC_BKP14R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP15R register ***************/
+#define RTC_BKP15R ((uint32_t)0xFFFFFFFF)
+
+/******************** Number of backup registers ******************************/
+#define RTC_BKP_NUMBER ((uint32_t)0x00000010)
+
+/******************************************************************************/
+/* */
+/* Serial Peripheral Interface (SPI) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for SPI_CR1 register ********************/
+#define SPI_CR1_CPHA ((uint32_t)0x00000001) /*!< Clock Phase */
+#define SPI_CR1_CPOL ((uint32_t)0x00000002) /*!< Clock Polarity */
+#define SPI_CR1_MSTR ((uint32_t)0x00000004) /*!< Master Selection */
+#define SPI_CR1_BR ((uint32_t)0x00000038) /*!< BR[2:0] bits (Baud Rate Control) */
+#define SPI_CR1_BR_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define SPI_CR1_BR_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define SPI_CR1_BR_2 ((uint32_t)0x00000020) /*!< Bit 2 */
+#define SPI_CR1_SPE ((uint32_t)0x00000040) /*!< SPI Enable */
+#define SPI_CR1_LSBFIRST ((uint32_t)0x00000080) /*!< Frame Format */
+#define SPI_CR1_SSI ((uint32_t)0x00000100) /*!< Internal slave select */
+#define SPI_CR1_SSM ((uint32_t)0x00000200) /*!< Software slave management */
+#define SPI_CR1_RXONLY ((uint32_t)0x00000400) /*!< Receive only */
+#define SPI_CR1_CRCL ((uint32_t)0x00000800) /*!< CRC Length */
+#define SPI_CR1_CRCNEXT ((uint32_t)0x00001000) /*!< Transmit CRC next */
+#define SPI_CR1_CRCEN ((uint32_t)0x00002000) /*!< Hardware CRC calculation enable */
+#define SPI_CR1_BIDIOE ((uint32_t)0x00004000) /*!< Output enable in bidirectional mode */
+#define SPI_CR1_BIDIMODE ((uint32_t)0x00008000) /*!< Bidirectional data mode enable */
+
+/******************* Bit definition for SPI_CR2 register ********************/
+#define SPI_CR2_RXDMAEN ((uint32_t)0x00000001) /*!< Rx Buffer DMA Enable */
+#define SPI_CR2_TXDMAEN ((uint32_t)0x00000002) /*!< Tx Buffer DMA Enable */
+#define SPI_CR2_SSOE ((uint32_t)0x00000004) /*!< SS Output Enable */
+#define SPI_CR2_NSSP ((uint32_t)0x00000008) /*!< NSS pulse management Enable */
+#define SPI_CR2_FRF ((uint32_t)0x00000010) /*!< Frame Format Enable */
+#define SPI_CR2_ERRIE ((uint32_t)0x00000020) /*!< Error Interrupt Enable */
+#define SPI_CR2_RXNEIE ((uint32_t)0x00000040) /*!< RX buffer Not Empty Interrupt Enable */
+#define SPI_CR2_TXEIE ((uint32_t)0x00000080) /*!< Tx buffer Empty Interrupt Enable */
+#define SPI_CR2_DS ((uint32_t)0x00000F00) /*!< DS[3:0] Data Size */
+#define SPI_CR2_DS_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define SPI_CR2_DS_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define SPI_CR2_DS_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define SPI_CR2_DS_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+#define SPI_CR2_FRXTH ((uint32_t)0x00001000) /*!< FIFO reception Threshold */
+#define SPI_CR2_LDMARX ((uint32_t)0x00002000) /*!< Last DMA transfer for reception */
+#define SPI_CR2_LDMATX ((uint32_t)0x00004000) /*!< Last DMA transfer for transmission */
+
+/******************** Bit definition for SPI_SR register ********************/
+#define SPI_SR_RXNE ((uint32_t)0x00000001) /*!< Receive buffer Not Empty */
+#define SPI_SR_TXE ((uint32_t)0x00000002) /*!< Transmit buffer Empty */
+#define SPI_SR_CHSIDE ((uint32_t)0x00000004) /*!< Channel side */
+#define SPI_SR_UDR ((uint32_t)0x00000008) /*!< Underrun flag */
+#define SPI_SR_CRCERR ((uint32_t)0x00000010) /*!< CRC Error flag */
+#define SPI_SR_MODF ((uint32_t)0x00000020) /*!< Mode fault */
+#define SPI_SR_OVR ((uint32_t)0x00000040) /*!< Overrun flag */
+#define SPI_SR_BSY ((uint32_t)0x00000080) /*!< Busy flag */
+#define SPI_SR_FRE ((uint32_t)0x00000100) /*!< TI frame format error */
+#define SPI_SR_FRLVL ((uint32_t)0x00000600) /*!< FIFO Reception Level */
+#define SPI_SR_FRLVL_0 ((uint32_t)0x00000200) /*!< Bit 0 */
+#define SPI_SR_FRLVL_1 ((uint32_t)0x00000400) /*!< Bit 1 */
+#define SPI_SR_FTLVL ((uint32_t)0x00001800) /*!< FIFO Transmission Level */
+#define SPI_SR_FTLVL_0 ((uint32_t)0x00000800) /*!< Bit 0 */
+#define SPI_SR_FTLVL_1 ((uint32_t)0x00001000) /*!< Bit 1 */
+
+/******************** Bit definition for SPI_DR register ********************/
+#define SPI_DR_DR ((uint32_t)0x0000FFFF) /*!< Data Register */
+
+/******************* Bit definition for SPI_CRCPR register ******************/
+#define SPI_CRCPR_CRCPOLY ((uint32_t)0x0000FFFF) /*!< CRC polynomial register */
+
+/****************** Bit definition for SPI_RXCRCR register ******************/
+#define SPI_RXCRCR_RXCRC ((uint32_t)0x0000FFFF) /*!< Rx CRC Register */
+
+/****************** Bit definition for SPI_TXCRCR register ******************/
+#define SPI_TXCRCR_TXCRC ((uint32_t)0x0000FFFF) /*!< Tx CRC Register */
+
+/****************** Bit definition for SPI_I2SCFGR register *****************/
+#define SPI_I2SCFGR_CHLEN ((uint32_t)0x00000001) /*!<Channel length (number of bits per audio channel) */
+#define SPI_I2SCFGR_DATLEN ((uint32_t)0x00000006) /*!<DATLEN[1:0] bits (Data length to be transferred) */
+#define SPI_I2SCFGR_DATLEN_0 ((uint32_t)0x00000002) /*!<Bit 0 */
+#define SPI_I2SCFGR_DATLEN_1 ((uint32_t)0x00000004) /*!<Bit 1 */
+#define SPI_I2SCFGR_CKPOL ((uint32_t)0x00000008) /*!<steady state clock polarity */
+#define SPI_I2SCFGR_I2SSTD ((uint32_t)0x00000030) /*!<I2SSTD[1:0] bits (I2S standard selection) */
+#define SPI_I2SCFGR_I2SSTD_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SSTD_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define SPI_I2SCFGR_PCMSYNC ((uint32_t)0x00000080) /*!<PCM frame synchronization */
+#define SPI_I2SCFGR_I2SCFG ((uint32_t)0x00000300) /*!<I2SCFG[1:0] bits (I2S configuration mode) */
+#define SPI_I2SCFGR_I2SCFG_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SCFG_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define SPI_I2SCFGR_I2SE ((uint32_t)0x00000400) /*!<I2S Enable */
+#define SPI_I2SCFGR_I2SMOD ((uint32_t)0x00000800) /*!<I2S mode selection */
+
+/****************** Bit definition for SPI_I2SPR register *******************/
+#define SPI_I2SPR_I2SDIV ((uint32_t)0x000000FF) /*!<I2S Linear prescaler */
+#define SPI_I2SPR_ODD ((uint32_t)0x00000100) /*!<Odd factor for the prescaler */
+#define SPI_I2SPR_MCKOE ((uint32_t)0x00000200) /*!<Master Clock Output Enable */
+
+/******************************************************************************/
+/* */
+/* System Configuration(SYSCFG) */
+/* */
+/******************************************************************************/
+/***************** Bit definition for SYSCFG_CFGR1 register *****************/
+#define SYSCFG_CFGR1_MEM_MODE ((uint32_t)0x00000007) /*!< SYSCFG_Memory Remap Config */
+#define SYSCFG_CFGR1_MEM_MODE_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define SYSCFG_CFGR1_MEM_MODE_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define SYSCFG_CFGR1_MEM_MODE_2 ((uint32_t)0x00000004) /*!< Bit 1 */
+#define SYSCFG_CFGR1_USB_IT_RMP ((uint32_t)0x00000020) /*!< USB interrupt remap */
+#define SYSCFG_CFGR1_TIM1_ITR3_RMP ((uint32_t)0x00000040) /*!< Timer 1 ITR3 selection */
+#define SYSCFG_CFGR1_DAC1_TRIG1_RMP ((uint32_t)0x00000080) /*!< DAC1 Trigger1 remap */
+#define SYSCFG_CFGR1_DMA_RMP ((uint32_t)0x00007900) /*!< DMA remap mask */
+#define SYSCFG_CFGR1_ADC24_DMA_RMP ((uint32_t)0x00000100) /*!< ADC2 and ADC4 DMA remap */
+#define SYSCFG_CFGR1_TIM16_DMA_RMP ((uint32_t)0x00000800) /*!< Timer 16 DMA remap */
+#define SYSCFG_CFGR1_TIM17_DMA_RMP ((uint32_t)0x00001000) /*!< Timer 17 DMA remap */
+#define SYSCFG_CFGR1_TIM6DAC1Ch1_DMA_RMP ((uint32_t)0x00002000) /*!< Timer 6 / DAC1 CH1 DMA remap */
+#define SYSCFG_CFGR1_TIM7DAC1Ch2_DMA_RMP ((uint32_t)0x00004000) /*!< Timer 7 / DAC1 CH2 DMA remap */
+#define SYSCFG_CFGR1_I2C_PB6_FMP ((uint32_t)0x00010000) /*!< I2C PB6 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_PB7_FMP ((uint32_t)0x00020000) /*!< I2C PB7 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_PB8_FMP ((uint32_t)0x00040000) /*!< I2C PB8 Fast mode plus */
+#define SYSCFG_CFGR1_I2C_PB9_FMP ((uint32_t)0x00080000) /*!< I2C PB9 Fast mode plus */
+#define SYSCFG_CFGR1_I2C1_FMP ((uint32_t)0x00100000) /*!< I2C1 Fast mode plus */
+#define SYSCFG_CFGR1_I2C2_FMP ((uint32_t)0x00200000) /*!< I2C2 Fast mode plus */
+#define SYSCFG_CFGR1_ENCODER_MODE ((uint32_t)0x00C00000) /*!< Encoder Mode */
+#define SYSCFG_CFGR1_ENCODER_MODE_0 ((uint32_t)0x00400000) /*!< Encoder Mode 0 */
+#define SYSCFG_CFGR1_ENCODER_MODE_1 ((uint32_t)0x00800000) /*!< Encoder Mode 1 */
+#define SYSCFG_CFGR1_I2C3_FMP ((uint32_t)0x01000000) /*!< I2C3 Fast mode plus */
+#define SYSCFG_CFGR1_FPU_IE ((uint32_t)0xFC000000) /*!< Floating Point Unit Interrupt Enable */
+#define SYSCFG_CFGR1_FPU_IE_0 ((uint32_t)0x04000000) /*!< Floating Point Unit Interrupt Enable 0 */
+#define SYSCFG_CFGR1_FPU_IE_1 ((uint32_t)0x08000000) /*!< Floating Point Unit Interrupt Enable 1 */
+#define SYSCFG_CFGR1_FPU_IE_2 ((uint32_t)0x10000000) /*!< Floating Point Unit Interrupt Enable 2 */
+#define SYSCFG_CFGR1_FPU_IE_3 ((uint32_t)0x20000000) /*!< Floating Point Unit Interrupt Enable 3 */
+#define SYSCFG_CFGR1_FPU_IE_4 ((uint32_t)0x40000000) /*!< Floating Point Unit Interrupt Enable 4 */
+#define SYSCFG_CFGR1_FPU_IE_5 ((uint32_t)0x80000000) /*!< Floating Point Unit Interrupt Enable 5 */
+
+/***************** Bit definition for SYSCFG_RCR register *******************/
+#define SYSCFG_RCR_PAGE0 ((uint32_t)0x00000001) /*!< ICODE SRAM Write protection page 0 */
+#define SYSCFG_RCR_PAGE1 ((uint32_t)0x00000002) /*!< ICODE SRAM Write protection page 1 */
+#define SYSCFG_RCR_PAGE2 ((uint32_t)0x00000004) /*!< ICODE SRAM Write protection page 2 */
+#define SYSCFG_RCR_PAGE3 ((uint32_t)0x00000008) /*!< ICODE SRAM Write protection page 3 */
+#define SYSCFG_RCR_PAGE4 ((uint32_t)0x00000010) /*!< ICODE SRAM Write protection page 4 */
+#define SYSCFG_RCR_PAGE5 ((uint32_t)0x00000020) /*!< ICODE SRAM Write protection page 5 */
+#define SYSCFG_RCR_PAGE6 ((uint32_t)0x00000040) /*!< ICODE SRAM Write protection page 6 */
+#define SYSCFG_RCR_PAGE7 ((uint32_t)0x00000080) /*!< ICODE SRAM Write protection page 7 */
+#define SYSCFG_RCR_PAGE8 ((uint32_t)0x00000100) /*!< ICODE SRAM Write protection page 8 */
+#define SYSCFG_RCR_PAGE9 ((uint32_t)0x00000200) /*!< ICODE SRAM Write protection page 9 */
+#define SYSCFG_RCR_PAGE10 ((uint32_t)0x00000400) /*!< ICODE SRAM Write protection page 10 */
+#define SYSCFG_RCR_PAGE11 ((uint32_t)0x00000800) /*!< ICODE SRAM Write protection page 11 */
+#define SYSCFG_RCR_PAGE12 ((uint32_t)0x00001000) /*!< ICODE SRAM Write protection page 12 */
+#define SYSCFG_RCR_PAGE13 ((uint32_t)0x00002000) /*!< ICODE SRAM Write protection page 13 */
+#define SYSCFG_RCR_PAGE14 ((uint32_t)0x00004000) /*!< ICODE SRAM Write protection page 14 */
+#define SYSCFG_RCR_PAGE15 ((uint32_t)0x00008000) /*!< ICODE SRAM Write protection page 15 */
+
+/***************** Bit definition for SYSCFG_EXTICR1 register ***************/
+#define SYSCFG_EXTICR1_EXTI0 ((uint32_t)0x0000000F) /*!< EXTI 0 configuration */
+#define SYSCFG_EXTICR1_EXTI1 ((uint32_t)0x000000F0) /*!< EXTI 1 configuration */
+#define SYSCFG_EXTICR1_EXTI2 ((uint32_t)0x00000F00) /*!< EXTI 2 configuration */
+#define SYSCFG_EXTICR1_EXTI3 ((uint32_t)0x0000F000) /*!< EXTI 3 configuration */
+
+/*!<*
+ * @brief EXTI0 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI0_PA ((uint32_t)0x00000000) /*!< PA[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PB ((uint32_t)0x00000001) /*!< PB[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PC ((uint32_t)0x00000002) /*!< PC[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PD ((uint32_t)0x00000003) /*!< PD[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PE ((uint32_t)0x00000004) /*!< PE[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PF ((uint32_t)0x00000005) /*!< PF[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PG ((uint32_t)0x00000006) /*!< PG[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PH ((uint32_t)0x00000007) /*!< PH[0] pin */
+
+/*!<*
+ * @brief EXTI1 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI1_PA ((uint32_t)0x00000000) /*!< PA[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PB ((uint32_t)0x00000010) /*!< PB[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PC ((uint32_t)0x00000020) /*!< PC[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PD ((uint32_t)0x00000030) /*!< PD[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PE ((uint32_t)0x00000040) /*!< PE[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PF ((uint32_t)0x00000050) /*!< PF[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PG ((uint32_t)0x00000060) /*!< PG[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PH ((uint32_t)0x00000070) /*!< PH[1] pin */
+
+/*!<*
+ * @brief EXTI2 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI2_PA ((uint32_t)0x00000000) /*!< PA[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PB ((uint32_t)0x00000100) /*!< PB[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PC ((uint32_t)0x00000200) /*!< PC[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PD ((uint32_t)0x00000300) /*!< PD[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PE ((uint32_t)0x00000400) /*!< PE[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PF ((uint32_t)0x00000500) /*!< PF[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PG ((uint32_t)0x00000600) /*!< PG[2] pin */
+
+/*!<*
+ * @brief EXTI3 configuration
+ */
+#define SYSCFG_EXTICR1_EXTI3_PA ((uint32_t)0x00000000) /*!< PA[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PB ((uint32_t)0x00001000) /*!< PB[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PC ((uint32_t)0x00002000) /*!< PC[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PD ((uint32_t)0x00003000) /*!< PD[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PE ((uint32_t)0x00004000) /*!< PE[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PF ((uint32_t)0x00005000) /*!< PE[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PG ((uint32_t)0x00006000) /*!< PG[3] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR2 register ***************/
+#define SYSCFG_EXTICR2_EXTI4 ((uint32_t)0x0000000F) /*!< EXTI 4 configuration */
+#define SYSCFG_EXTICR2_EXTI5 ((uint32_t)0x000000F0) /*!< EXTI 5 configuration */
+#define SYSCFG_EXTICR2_EXTI6 ((uint32_t)0x00000F00) /*!< EXTI 6 configuration */
+#define SYSCFG_EXTICR2_EXTI7 ((uint32_t)0x0000F000) /*!< EXTI 7 configuration */
+
+/*!<*
+ * @brief EXTI4 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI4_PA ((uint32_t)0x00000000) /*!< PA[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PB ((uint32_t)0x00000001) /*!< PB[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PC ((uint32_t)0x00000002) /*!< PC[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PD ((uint32_t)0x00000003) /*!< PD[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PE ((uint32_t)0x00000004) /*!< PE[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PF ((uint32_t)0x00000005) /*!< PF[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PG ((uint32_t)0x00000006) /*!< PG[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PH ((uint32_t)0x00000007) /*!< PH[4] pin */
+
+/*!<*
+ * @brief EXTI5 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI5_PA ((uint32_t)0x00000000) /*!< PA[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PB ((uint32_t)0x00000010) /*!< PB[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PC ((uint32_t)0x00000020) /*!< PC[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PD ((uint32_t)0x00000030) /*!< PD[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PE ((uint32_t)0x00000040) /*!< PE[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PF ((uint32_t)0x00000050) /*!< PF[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PG ((uint32_t)0x00000060) /*!< PG[5] pin */
+
+/*!<*
+ * @brief EXTI6 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI6_PA ((uint32_t)0x00000000) /*!< PA[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PB ((uint32_t)0x00000100) /*!< PB[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PC ((uint32_t)0x00000200) /*!< PC[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PD ((uint32_t)0x00000300) /*!< PD[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PE ((uint32_t)0x00000400) /*!< PE[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PF ((uint32_t)0x00000500) /*!< PF[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PG ((uint32_t)0x00000600) /*!< PG[6] pin */
+
+/*!<*
+ * @brief EXTI7 configuration
+ */
+#define SYSCFG_EXTICR2_EXTI7_PA ((uint32_t)0x00000000) /*!< PA[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PB ((uint32_t)0x00001000) /*!< PB[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PC ((uint32_t)0x00002000) /*!< PC[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PD ((uint32_t)0x00003000) /*!< PD[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PE ((uint32_t)0x00004000) /*!< PE[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PF ((uint32_t)0x00005000) /*!< PF[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PG ((uint32_t)0x00006000) /*!< PG[7] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR3 register ***************/
+#define SYSCFG_EXTICR3_EXTI8 ((uint32_t)0x0000000F) /*!< EXTI 8 configuration */
+#define SYSCFG_EXTICR3_EXTI9 ((uint32_t)0x000000F0) /*!< EXTI 9 configuration */
+#define SYSCFG_EXTICR3_EXTI10 ((uint32_t)0x00000F00) /*!< EXTI 10 configuration */
+#define SYSCFG_EXTICR3_EXTI11 ((uint32_t)0x0000F000) /*!< EXTI 11 configuration */
+
+/*!<*
+ * @brief EXTI8 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI8_PA ((uint32_t)0x00000000) /*!< PA[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PB ((uint32_t)0x00000001) /*!< PB[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PC ((uint32_t)0x00000002) /*!< PC[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PD ((uint32_t)0x00000003) /*!< PD[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PE ((uint32_t)0x00000004) /*!< PE[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PF ((uint32_t)0x00000005) /*!< PF[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PG ((uint32_t)0x00000006) /*!< PG[8] pin */
+
+/*!<*
+ * @brief EXTI9 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI9_PA ((uint32_t)0x00000000) /*!< PA[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PB ((uint32_t)0x00000010) /*!< PB[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PC ((uint32_t)0x00000020) /*!< PC[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PD ((uint32_t)0x00000030) /*!< PD[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PE ((uint32_t)0x00000040) /*!< PE[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PF ((uint32_t)0x00000050) /*!< PF[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PG ((uint32_t)0x00000060) /*!< PG[9] pin */
+
+/*!<*
+ * @brief EXTI10 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI10_PA ((uint32_t)0x00000000) /*!< PA[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PB ((uint32_t)0x00000100) /*!< PB[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PC ((uint32_t)0x00000200) /*!< PC[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PD ((uint32_t)0x00000300) /*!< PD[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PE ((uint32_t)0x00000400) /*!< PE[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PF ((uint32_t)0x00000500) /*!< PF[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PG ((uint32_t)0x00000600) /*!< PG[10] pin */
+
+/*!<*
+ * @brief EXTI11 configuration
+ */
+#define SYSCFG_EXTICR3_EXTI11_PA ((uint32_t)0x00000000) /*!< PA[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PB ((uint32_t)0x00001000) /*!< PB[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PC ((uint32_t)0x00002000) /*!< PC[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PD ((uint32_t)0x00003000) /*!< PD[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PE ((uint32_t)0x00004000) /*!< PE[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PF ((uint32_t)0x00005000) /*!< PF[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PG ((uint32_t)0x00006000) /*!< PG[11] pin */
+
+/***************** Bit definition for SYSCFG_EXTICR4 register *****************/
+#define SYSCFG_EXTICR4_EXTI12 ((uint32_t)0x0000000F) /*!< EXTI 12 configuration */
+#define SYSCFG_EXTICR4_EXTI13 ((uint32_t)0x000000F0) /*!< EXTI 13 configuration */
+#define SYSCFG_EXTICR4_EXTI14 ((uint32_t)0x00000F00) /*!< EXTI 14 configuration */
+#define SYSCFG_EXTICR4_EXTI15 ((uint32_t)0x0000F000) /*!< EXTI 15 configuration */
+
+/*!<*
+ * @brief EXTI12 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI12_PA ((uint32_t)0x00000000) /*!< PA[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PB ((uint32_t)0x00000001) /*!< PB[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PC ((uint32_t)0x00000002) /*!< PC[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PD ((uint32_t)0x00000003) /*!< PD[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PE ((uint32_t)0x00000004) /*!< PE[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PF ((uint32_t)0x00000005) /*!< PF[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PG ((uint32_t)0x00000006) /*!< PG[12] pin */
+
+/*!<*
+ * @brief EXTI13 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI13_PA ((uint32_t)0x00000000) /*!< PA[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PB ((uint32_t)0x00000010) /*!< PB[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PC ((uint32_t)0x00000020) /*!< PC[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PD ((uint32_t)0x00000030) /*!< PD[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PE ((uint32_t)0x00000040) /*!< PE[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PF ((uint32_t)0x00000050) /*!< PF[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PG ((uint32_t)0x00000060) /*!< PG[13] pin */
+
+/*!<*
+ * @brief EXTI14 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI14_PA ((uint32_t)0x00000000) /*!< PA[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PB ((uint32_t)0x00000100) /*!< PB[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PC ((uint32_t)0x00000200) /*!< PC[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PD ((uint32_t)0x00000300) /*!< PD[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PE ((uint32_t)0x00000400) /*!< PE[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PF ((uint32_t)0x00000500) /*!< PF[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PG ((uint32_t)0x00000600) /*!< PG[14] pin */
+
+/*!<*
+ * @brief EXTI15 configuration
+ */
+#define SYSCFG_EXTICR4_EXTI15_PA ((uint32_t)0x00000000) /*!< PA[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PB ((uint32_t)0x00001000) /*!< PB[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PC ((uint32_t)0x00002000) /*!< PC[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PD ((uint32_t)0x00003000) /*!< PD[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PE ((uint32_t)0x00004000) /*!< PE[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PF ((uint32_t)0x00005000) /*!< PF[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PG ((uint32_t)0x00006000) /*!< PG[15] pin */
+
+/***************** Bit definition for SYSCFG_CFGR2 register *****************/
+#define SYSCFG_CFGR2_LOCKUP_LOCK ((uint32_t)0x00000001) /*!< Enables and locks the LOCKUP (Hardfault) output of CortexM4 with Break Input of TIM1/8/15/16/17/20 */
+#define SYSCFG_CFGR2_SRAM_PARITY_LOCK ((uint32_t)0x00000002) /*!< Enables and locks the SRAM_PARITY error signal with Break Input of TIM1/8/15/16/17/20 */
+#define SYSCFG_CFGR2_PVD_LOCK ((uint32_t)0x00000004) /*!< Enables and locks the PVD connection with TIM1/8/15/16/17/20 Break Input, as well as the PVDE and PLS[2:0] in the PWR_CR register */
+#define SYSCFG_CFGR2_BYP_ADDR_PAR ((uint32_t)0x00000010) /*!< Disables the adddress parity check on RAM */
+#define SYSCFG_CFGR2_SRAM_PE ((uint32_t)0x00000100) /*!< SRAM Parity error flag */
+
+/***************** Bit definition for SYSCFG_CFGR4 register *****************/
+#define SYSCFG_CFGR4_ADC12_EXT2_RMP ((uint32_t)0x00000001) /*!< ADC12 regular channel EXT2 remap */
+#define SYSCFG_CFGR4_ADC12_EXT3_RMP ((uint32_t)0x00000002) /*!< ADC12 regular channel EXT3 remap */
+#define SYSCFG_CFGR4_ADC12_EXT5_RMP ((uint32_t)0x00000004) /*!< ADC12 regular channel EXT5 remap */
+#define SYSCFG_CFGR4_ADC12_EXT13_RMP ((uint32_t)0x00000008) /*!< ADC12 regular channel EXT13 remap */
+#define SYSCFG_CFGR4_ADC12_EXT15_RMP ((uint32_t)0x00000010) /*!< ADC12 regular channel EXT15 remap */
+#define SYSCFG_CFGR4_ADC12_JEXT3_RMP ((uint32_t)0x00000020) /*!< ADC12 injected channel JEXT3 remap */
+#define SYSCFG_CFGR4_ADC12_JEXT6_RMP ((uint32_t)0x00000040) /*!< ADC12 injected channel JEXT6 remap */
+#define SYSCFG_CFGR4_ADC12_JEXT13_RMP ((uint32_t)0x00000080) /*!< ADC12 injected channel JEXT13 remap */
+#define SYSCFG_CFGR4_ADC34_EXT5_RMP ((uint32_t)0x00000100) /*!< ADC34 regular channel EXT5 remap */
+#define SYSCFG_CFGR4_ADC34_EXT6_RMP ((uint32_t)0x00000200) /*!< ADC34 regular channel EXT6 remap */
+#define SYSCFG_CFGR4_ADC34_EXT15_RMP ((uint32_t)0x00000400) /*!< ADC34 regular channel EXT15 remap */
+#define SYSCFG_CFGR4_ADC34_JEXT5_RMP ((uint32_t)0x00000800) /*!< ADC34 injected channel JEXT5 remap */
+#define SYSCFG_CFGR4_ADC34_JEXT11_RMP ((uint32_t)0x00001000) /*!< ADC34 injected channel JEXT11 remap */
+#define SYSCFG_CFGR4_ADC34_JEXT14_RMP ((uint32_t)0x00002000) /*!< ADC34 injected channel JEXT14 remap */
+
+/******************************************************************************/
+/* */
+/* TIM */
+/* */
+/******************************************************************************/
+/******************* Bit definition for TIM_CR1 register ********************/
+#define TIM_CR1_CEN ((uint32_t)0x00000001) /*!<Counter enable */
+#define TIM_CR1_UDIS ((uint32_t)0x00000002) /*!<Update disable */
+#define TIM_CR1_URS ((uint32_t)0x00000004) /*!<Update request source */
+#define TIM_CR1_OPM ((uint32_t)0x00000008) /*!<One pulse mode */
+#define TIM_CR1_DIR ((uint32_t)0x00000010) /*!<Direction */
+
+#define TIM_CR1_CMS ((uint32_t)0x00000060) /*!<CMS[1:0] bits (Center-aligned mode selection) */
+#define TIM_CR1_CMS_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TIM_CR1_CMS_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+
+#define TIM_CR1_ARPE ((uint32_t)0x00000080) /*!<Auto-reload preload enable */
+
+#define TIM_CR1_CKD ((uint32_t)0x00000300) /*!<CKD[1:0] bits (clock division) */
+#define TIM_CR1_CKD_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CR1_CKD_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CR1_UIFREMAP ((uint32_t)0x00000800) /*!<Update interrupt flag remap */
+
+/******************* Bit definition for TIM_CR2 register ********************/
+#define TIM_CR2_CCPC ((uint32_t)0x00000001) /*!<Capture/Compare Preloaded Control */
+#define TIM_CR2_CCUS ((uint32_t)0x00000004) /*!<Capture/Compare Control Update Selection */
+#define TIM_CR2_CCDS ((uint32_t)0x00000008) /*!<Capture/Compare DMA Selection */
+
+#define TIM_CR2_MMS ((uint32_t)0x00000070) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CR2_MMS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CR2_MMS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_CR2_TI1S ((uint32_t)0x00000080) /*!<TI1 Selection */
+#define TIM_CR2_OIS1 ((uint32_t)0x00000100) /*!<Output Idle state 1 (OC1 output) */
+#define TIM_CR2_OIS1N ((uint32_t)0x00000200) /*!<Output Idle state 1 (OC1N output) */
+#define TIM_CR2_OIS2 ((uint32_t)0x00000400) /*!<Output Idle state 2 (OC2 output) */
+#define TIM_CR2_OIS2N ((uint32_t)0x00000800) /*!<Output Idle state 2 (OC2N output) */
+#define TIM_CR2_OIS3 ((uint32_t)0x00001000) /*!<Output Idle state 3 (OC3 output) */
+#define TIM_CR2_OIS3N ((uint32_t)0x00002000) /*!<Output Idle state 3 (OC3N output) */
+#define TIM_CR2_OIS4 ((uint32_t)0x00004000) /*!<Output Idle state 4 (OC4 output) */
+#define TIM_CR2_OIS5 ((uint32_t)0x00010000) /*!<Output Idle state 4 (OC4 output) */
+#define TIM_CR2_OIS6 ((uint32_t)0x00040000) /*!<Output Idle state 4 (OC4 output) */
+
+#define TIM_CR2_MMS2 ((uint32_t)0x00F00000) /*!<MMS[2:0] bits (Master Mode Selection) */
+#define TIM_CR2_MMS2_0 ((uint32_t)0x00100000) /*!<Bit 0 */
+#define TIM_CR2_MMS2_1 ((uint32_t)0x00200000) /*!<Bit 1 */
+#define TIM_CR2_MMS2_2 ((uint32_t)0x00400000) /*!<Bit 2 */
+#define TIM_CR2_MMS2_3 ((uint32_t)0x00800000) /*!<Bit 2 */
+
+/******************* Bit definition for TIM_SMCR register *******************/
+#define TIM_SMCR_SMS ((uint32_t)0x00010007) /*!<SMS[2:0] bits (Slave mode selection) */
+#define TIM_SMCR_SMS_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_SMCR_SMS_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_SMCR_SMS_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_SMCR_SMS_3 ((uint32_t)0x00010000) /*!<Bit 3 */
+
+#define TIM_SMCR_OCCS ((uint32_t)0x00000008) /*!< OCREF clear selection */
+
+#define TIM_SMCR_TS ((uint32_t)0x00000070) /*!<TS[2:0] bits (Trigger selection) */
+#define TIM_SMCR_TS_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_SMCR_TS_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_SMCR_TS_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+
+#define TIM_SMCR_MSM ((uint32_t)0x00000080) /*!<Master/slave mode */
+
+#define TIM_SMCR_ETF ((uint32_t)0x00000F00) /*!<ETF[3:0] bits (External trigger filter) */
+#define TIM_SMCR_ETF_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_SMCR_ETF_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_SMCR_ETF_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_SMCR_ETF_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+
+#define TIM_SMCR_ETPS ((uint32_t)0x00003000) /*!<ETPS[1:0] bits (External trigger prescaler) */
+#define TIM_SMCR_ETPS_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_SMCR_ETPS_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+
+#define TIM_SMCR_ECE ((uint32_t)0x00004000) /*!<External clock enable */
+#define TIM_SMCR_ETP ((uint32_t)0x00008000) /*!<External trigger polarity */
+
+/******************* Bit definition for TIM_DIER register *******************/
+#define TIM_DIER_UIE ((uint32_t)0x00000001) /*!<Update interrupt enable */
+#define TIM_DIER_CC1IE ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt enable */
+#define TIM_DIER_CC2IE ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt enable */
+#define TIM_DIER_CC3IE ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt enable */
+#define TIM_DIER_CC4IE ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt enable */
+#define TIM_DIER_COMIE ((uint32_t)0x00000020) /*!<COM interrupt enable */
+#define TIM_DIER_TIE ((uint32_t)0x00000040) /*!<Trigger interrupt enable */
+#define TIM_DIER_BIE ((uint32_t)0x00000080) /*!<Break interrupt enable */
+#define TIM_DIER_UDE ((uint32_t)0x00000100) /*!<Update DMA request enable */
+#define TIM_DIER_CC1DE ((uint32_t)0x00000200) /*!<Capture/Compare 1 DMA request enable */
+#define TIM_DIER_CC2DE ((uint32_t)0x00000400) /*!<Capture/Compare 2 DMA request enable */
+#define TIM_DIER_CC3DE ((uint32_t)0x00000800) /*!<Capture/Compare 3 DMA request enable */
+#define TIM_DIER_CC4DE ((uint32_t)0x00001000) /*!<Capture/Compare 4 DMA request enable */
+#define TIM_DIER_COMDE ((uint32_t)0x00002000) /*!<COM DMA request enable */
+#define TIM_DIER_TDE ((uint32_t)0x00004000) /*!<Trigger DMA request enable */
+
+/******************** Bit definition for TIM_SR register ********************/
+#define TIM_SR_UIF ((uint32_t)0x00000001) /*!<Update interrupt Flag */
+#define TIM_SR_CC1IF ((uint32_t)0x00000002) /*!<Capture/Compare 1 interrupt Flag */
+#define TIM_SR_CC2IF ((uint32_t)0x00000004) /*!<Capture/Compare 2 interrupt Flag */
+#define TIM_SR_CC3IF ((uint32_t)0x00000008) /*!<Capture/Compare 3 interrupt Flag */
+#define TIM_SR_CC4IF ((uint32_t)0x00000010) /*!<Capture/Compare 4 interrupt Flag */
+#define TIM_SR_COMIF ((uint32_t)0x00000020) /*!<COM interrupt Flag */
+#define TIM_SR_TIF ((uint32_t)0x00000040) /*!<Trigger interrupt Flag */
+#define TIM_SR_BIF ((uint32_t)0x00000080) /*!<Break interrupt Flag */
+#define TIM_SR_B2IF ((uint32_t)0x00000100) /*!<Break2 interrupt Flag */
+#define TIM_SR_CC1OF ((uint32_t)0x00000200) /*!<Capture/Compare 1 Overcapture Flag */
+#define TIM_SR_CC2OF ((uint32_t)0x00000400) /*!<Capture/Compare 2 Overcapture Flag */
+#define TIM_SR_CC3OF ((uint32_t)0x00000800) /*!<Capture/Compare 3 Overcapture Flag */
+#define TIM_SR_CC4OF ((uint32_t)0x00001000) /*!<Capture/Compare 4 Overcapture Flag */
+#define TIM_SR_CC5IF ((uint32_t)0x00010000) /*!<Capture/Compare 5 interrupt Flag */
+#define TIM_SR_CC6IF ((uint32_t)0x00020000) /*!<Capture/Compare 6 interrupt Flag */
+
+/******************* Bit definition for TIM_EGR register ********************/
+#define TIM_EGR_UG ((uint32_t)0x00000001) /*!<Update Generation */
+#define TIM_EGR_CC1G ((uint32_t)0x00000002) /*!<Capture/Compare 1 Generation */
+#define TIM_EGR_CC2G ((uint32_t)0x00000004) /*!<Capture/Compare 2 Generation */
+#define TIM_EGR_CC3G ((uint32_t)0x00000008) /*!<Capture/Compare 3 Generation */
+#define TIM_EGR_CC4G ((uint32_t)0x00000010) /*!<Capture/Compare 4 Generation */
+#define TIM_EGR_COMG ((uint32_t)0x00000020) /*!<Capture/Compare Control Update Generation */
+#define TIM_EGR_TG ((uint32_t)0x00000040) /*!<Trigger Generation */
+#define TIM_EGR_BG ((uint32_t)0x00000080) /*!<Break Generation */
+#define TIM_EGR_B2G ((uint32_t)0x00000100) /*!<Break Generation */
+
+/****************** Bit definition for TIM_CCMR1 register *******************/
+#define TIM_CCMR1_CC1S ((uint32_t)0x00000003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
+#define TIM_CCMR1_CC1S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR1_CC1S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC1FE ((uint32_t)0x00000004) /*!<Output Compare 1 Fast enable */
+#define TIM_CCMR1_OC1PE ((uint32_t)0x00000008) /*!<Output Compare 1 Preload enable */
+
+#define TIM_CCMR1_OC1M ((uint32_t)0x00010070) /*!<OC1M[2:0] bits (Output Compare 1 Mode) */
+#define TIM_CCMR1_OC1M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_OC1M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_OC1M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR1_OC1M_3 ((uint32_t)0x00010000) /*!<Bit 3 */
+
+#define TIM_CCMR1_OC1CE ((uint32_t)0x00000080) /*!<Output Compare 1Clear Enable */
+
+#define TIM_CCMR1_CC2S ((uint32_t)0x00000300) /*!<CC2S[1:0] bits (Capture/Compare 2 Selection) */
+#define TIM_CCMR1_CC2S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR1_CC2S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR1_OC2FE ((uint32_t)0x00000400) /*!<Output Compare 2 Fast enable */
+#define TIM_CCMR1_OC2PE ((uint32_t)0x00000800) /*!<Output Compare 2 Preload enable */
+
+#define TIM_CCMR1_OC2M ((uint32_t)0x01007000) /*!<OC2M[2:0] bits (Output Compare 2 Mode) */
+#define TIM_CCMR1_OC2M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_OC2M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_OC2M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR1_OC2M_3 ((uint32_t)0x01000000) /*!<Bit 3 */
+
+#define TIM_CCMR1_OC2CE ((uint32_t)0x00008000) /*!<Output Compare 2 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR1_IC1PSC ((uint32_t)0x0000000C) /*!<IC1PSC[1:0] bits (Input Capture 1 Prescaler) */
+#define TIM_CCMR1_IC1PSC_0 ((uint32_t)0x00000004) /*!<Bit 0 */
+#define TIM_CCMR1_IC1PSC_1 ((uint32_t)0x00000008) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC1F ((uint32_t)0x000000F0) /*!<IC1F[3:0] bits (Input Capture 1 Filter) */
+#define TIM_CCMR1_IC1F_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR1_IC1F_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR1_IC1F_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR1_IC1F_3 ((uint32_t)0x00000080) /*!<Bit 3 */
+
+#define TIM_CCMR1_IC2PSC ((uint32_t)0x00000C00) /*!<IC2PSC[1:0] bits (Input Capture 2 Prescaler) */
+#define TIM_CCMR1_IC2PSC_0 ((uint32_t)0x00000400) /*!<Bit 0 */
+#define TIM_CCMR1_IC2PSC_1 ((uint32_t)0x00000800) /*!<Bit 1 */
+
+#define TIM_CCMR1_IC2F ((uint32_t)0x0000F000) /*!<IC2F[3:0] bits (Input Capture 2 Filter) */
+#define TIM_CCMR1_IC2F_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR1_IC2F_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR1_IC2F_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR1_IC2F_3 ((uint32_t)0x00008000) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR2 register *******************/
+#define TIM_CCMR2_CC3S ((uint32_t)0x00000003) /*!<CC3S[1:0] bits (Capture/Compare 3 Selection) */
+#define TIM_CCMR2_CC3S_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_CCMR2_CC3S_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC3FE ((uint32_t)0x00000004) /*!<Output Compare 3 Fast enable */
+#define TIM_CCMR2_OC3PE ((uint32_t)0x00000008) /*!<Output Compare 3 Preload enable */
+
+#define TIM_CCMR2_OC3M ((uint32_t)0x00010070) /*!<OC3M[2:0] bits (Output Compare 3 Mode) */
+#define TIM_CCMR2_OC3M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR2_OC3M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR2_OC3M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR2_OC3M_3 ((uint32_t)0x00010000) /*!<Bit 3 */
+
+#define TIM_CCMR2_OC3CE ((uint32_t)0x00000080) /*!<Output Compare 3 Clear Enable */
+
+#define TIM_CCMR2_CC4S ((uint32_t)0x00000300) /*!<CC4S[1:0] bits (Capture/Compare 4 Selection) */
+#define TIM_CCMR2_CC4S_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_CCMR2_CC4S_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_CCMR2_OC4FE ((uint32_t)0x00000400) /*!<Output Compare 4 Fast enable */
+#define TIM_CCMR2_OC4PE ((uint32_t)0x00000800) /*!<Output Compare 4 Preload enable */
+
+#define TIM_CCMR2_OC4M ((uint32_t)0x01007000) /*!<OC4M[2:0] bits (Output Compare 4 Mode) */
+#define TIM_CCMR2_OC4M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR2_OC4M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR2_OC4M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR2_OC4M_3 ((uint32_t)0x01000000) /*!<Bit 3 */
+
+#define TIM_CCMR2_OC4CE ((uint32_t)0x00008000) /*!<Output Compare 4 Clear Enable */
+
+/*----------------------------------------------------------------------------*/
+
+#define TIM_CCMR2_IC3PSC ((uint32_t)0x00000000000C) /*!<IC3PSC[1:0] bits (Input Capture 3 Prescaler) */
+#define TIM_CCMR2_IC3PSC_0 ((uint32_t)0x000000000004) /*!<Bit 0 */
+#define TIM_CCMR2_IC3PSC_1 ((uint32_t)0x000000000008) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC3F ((uint32_t)0x0000000000F0) /*!<IC3F[3:0] bits (Input Capture 3 Filter) */
+#define TIM_CCMR2_IC3F_0 ((uint32_t)0x000000000010) /*!<Bit 0 */
+#define TIM_CCMR2_IC3F_1 ((uint32_t)0x000000000020) /*!<Bit 1 */
+#define TIM_CCMR2_IC3F_2 ((uint32_t)0x000000000040) /*!<Bit 2 */
+#define TIM_CCMR2_IC3F_3 ((uint32_t)0x000000000080) /*!<Bit 3 */
+
+#define TIM_CCMR2_IC4PSC ((uint32_t)0x000000000C00) /*!<IC4PSC[1:0] bits (Input Capture 4 Prescaler) */
+#define TIM_CCMR2_IC4PSC_0 ((uint32_t)0x000000000400) /*!<Bit 0 */
+#define TIM_CCMR2_IC4PSC_1 ((uint32_t)0x000000000800) /*!<Bit 1 */
+
+#define TIM_CCMR2_IC4F ((uint32_t)0x00000000F000) /*!<IC4F[3:0] bits (Input Capture 4 Filter) */
+#define TIM_CCMR2_IC4F_0 ((uint32_t)0x000000001000) /*!<Bit 0 */
+#define TIM_CCMR2_IC4F_1 ((uint32_t)0x000000002000) /*!<Bit 1 */
+#define TIM_CCMR2_IC4F_2 ((uint32_t)0x000000004000) /*!<Bit 2 */
+#define TIM_CCMR2_IC4F_3 ((uint32_t)0x000000008000) /*!<Bit 3 */
+
+/******************* Bit definition for TIM_CCER register *******************/
+#define TIM_CCER_CC1E ((uint32_t)0x00000001) /*!<Capture/Compare 1 output enable */
+#define TIM_CCER_CC1P ((uint32_t)0x00000002) /*!<Capture/Compare 1 output Polarity */
+#define TIM_CCER_CC1NE ((uint32_t)0x00000004) /*!<Capture/Compare 1 Complementary output enable */
+#define TIM_CCER_CC1NP ((uint32_t)0x00000008) /*!<Capture/Compare 1 Complementary output Polarity */
+#define TIM_CCER_CC2E ((uint32_t)0x00000010) /*!<Capture/Compare 2 output enable */
+#define TIM_CCER_CC2P ((uint32_t)0x00000020) /*!<Capture/Compare 2 output Polarity */
+#define TIM_CCER_CC2NE ((uint32_t)0x00000040) /*!<Capture/Compare 2 Complementary output enable */
+#define TIM_CCER_CC2NP ((uint32_t)0x00000080) /*!<Capture/Compare 2 Complementary output Polarity */
+#define TIM_CCER_CC3E ((uint32_t)0x00000100) /*!<Capture/Compare 3 output enable */
+#define TIM_CCER_CC3P ((uint32_t)0x00000200) /*!<Capture/Compare 3 output Polarity */
+#define TIM_CCER_CC3NE ((uint32_t)0x00000400) /*!<Capture/Compare 3 Complementary output enable */
+#define TIM_CCER_CC3NP ((uint32_t)0x00000800) /*!<Capture/Compare 3 Complementary output Polarity */
+#define TIM_CCER_CC4E ((uint32_t)0x00001000) /*!<Capture/Compare 4 output enable */
+#define TIM_CCER_CC4P ((uint32_t)0x00002000) /*!<Capture/Compare 4 output Polarity */
+#define TIM_CCER_CC4NP ((uint32_t)0x00008000) /*!<Capture/Compare 4 Complementary output Polarity */
+#define TIM_CCER_CC5E ((uint32_t)0x00010000) /*!<Capture/Compare 5 output enable */
+#define TIM_CCER_CC5P ((uint32_t)0x00020000) /*!<Capture/Compare 5 output Polarity */
+#define TIM_CCER_CC6E ((uint32_t)0x00100000) /*!<Capture/Compare 6 output enable */
+#define TIM_CCER_CC6P ((uint32_t)0x00200000) /*!<Capture/Compare 6 output Polarity */
+
+/******************* Bit definition for TIM_CNT register ********************/
+#define TIM_CNT_CNT ((uint32_t)0xFFFFFFFF) /*!<Counter Value */
+#define TIM_CNT_UIFCPY ((uint32_t)0x80000000) /*!<Update interrupt flag copy */
+
+/******************* Bit definition for TIM_PSC register ********************/
+#define TIM_PSC_PSC ((uint32_t)0x0000FFFF) /*!<Prescaler Value */
+
+/******************* Bit definition for TIM_ARR register ********************/
+#define TIM_ARR_ARR ((uint32_t)0xFFFFFFFF) /*!<actual auto-reload Value */
+
+/******************* Bit definition for TIM_RCR register ********************/
+#define TIM_RCR_REP ((uint32_t)0x000000FF) /*!<Repetition Counter Value */
+
+/******************* Bit definition for TIM_CCR1 register *******************/
+#define TIM_CCR1_CCR1 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 1 Value */
+
+/******************* Bit definition for TIM_CCR2 register *******************/
+#define TIM_CCR2_CCR2 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 2 Value */
+
+/******************* Bit definition for TIM_CCR3 register *******************/
+#define TIM_CCR3_CCR3 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 3 Value */
+
+/******************* Bit definition for TIM_CCR4 register *******************/
+#define TIM_CCR4_CCR4 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 4 Value */
+
+/******************* Bit definition for TIM_CCR5 register *******************/
+#define TIM_CCR5_CCR5 ((uint32_t)0xFFFFFFFF) /*!<Capture/Compare 5 Value */
+#define TIM_CCR5_GC5C1 ((uint32_t)0x20000000) /*!<Group Channel 5 and Channel 1 */
+#define TIM_CCR5_GC5C2 ((uint32_t)0x40000000) /*!<Group Channel 5 and Channel 2 */
+#define TIM_CCR5_GC5C3 ((uint32_t)0x80000000) /*!<Group Channel 5 and Channel 3 */
+
+/******************* Bit definition for TIM_CCR6 register *******************/
+#define TIM_CCR6_CCR6 ((uint32_t)0x0000FFFF) /*!<Capture/Compare 6 Value */
+
+/******************* Bit definition for TIM_BDTR register *******************/
+#define TIM_BDTR_DTG ((uint32_t)0x000000FF) /*!<DTG[0:7] bits (Dead-Time Generator set-up) */
+#define TIM_BDTR_DTG_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_BDTR_DTG_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_BDTR_DTG_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_BDTR_DTG_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_BDTR_DTG_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define TIM_BDTR_DTG_5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define TIM_BDTR_DTG_6 ((uint32_t)0x00000040) /*!<Bit 6 */
+#define TIM_BDTR_DTG_7 ((uint32_t)0x00000080) /*!<Bit 7 */
+
+#define TIM_BDTR_LOCK ((uint32_t)0x00000300) /*!<LOCK[1:0] bits (Lock Configuration) */
+#define TIM_BDTR_LOCK_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_BDTR_LOCK_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+
+#define TIM_BDTR_OSSI ((uint32_t)0x00000400) /*!<Off-State Selection for Idle mode */
+#define TIM_BDTR_OSSR ((uint32_t)0x00000800) /*!<Off-State Selection for Run mode */
+#define TIM_BDTR_BKE ((uint32_t)0x00001000) /*!<Break enable for Break1 */
+#define TIM_BDTR_BKP ((uint32_t)0x00002000) /*!<Break Polarity for Break1 */
+#define TIM_BDTR_AOE ((uint32_t)0x00004000) /*!<Automatic Output enable */
+#define TIM_BDTR_MOE ((uint32_t)0x00008000) /*!<Main Output enable */
+
+#define TIM_BDTR_BKF ((uint32_t)0x000F0000) /*!<Break Filter for Break1 */
+#define TIM_BDTR_BK2F ((uint32_t)0x00F00000) /*!<Break Filter for Break2 */
+
+#define TIM_BDTR_BK2E ((uint32_t)0x01000000) /*!<Break enable for Break2 */
+#define TIM_BDTR_BK2P ((uint32_t)0x02000000) /*!<Break Polarity for Break2 */
+
+/******************* Bit definition for TIM_DCR register ********************/
+#define TIM_DCR_DBA ((uint32_t)0x0000001F) /*!<DBA[4:0] bits (DMA Base Address) */
+#define TIM_DCR_DBA_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM_DCR_DBA_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM_DCR_DBA_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM_DCR_DBA_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define TIM_DCR_DBA_4 ((uint32_t)0x00000010) /*!<Bit 4 */
+
+#define TIM_DCR_DBL ((uint32_t)0x00001F00) /*!<DBL[4:0] bits (DMA Burst Length) */
+#define TIM_DCR_DBL_0 ((uint32_t)0x00000100) /*!<Bit 0 */
+#define TIM_DCR_DBL_1 ((uint32_t)0x00000200) /*!<Bit 1 */
+#define TIM_DCR_DBL_2 ((uint32_t)0x00000400) /*!<Bit 2 */
+#define TIM_DCR_DBL_3 ((uint32_t)0x00000800) /*!<Bit 3 */
+#define TIM_DCR_DBL_4 ((uint32_t)0x00001000) /*!<Bit 4 */
+
+/******************* Bit definition for TIM_DMAR register *******************/
+#define TIM_DMAR_DMAB ((uint32_t)0x0000FFFF) /*!<DMA register for burst accesses */
+
+/******************* Bit definition for TIM16_OR register ********************/
+#define TIM16_OR_TI1_RMP ((uint32_t)0x00000003) /*!<TI1_RMP[1:0] bits (TIM16 Input 1 remap) */
+#define TIM16_OR_TI1_RMP_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM16_OR_TI1_RMP_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+
+/******************* Bit definition for TIM1_OR register ********************/
+#define TIM1_OR_ETR_RMP ((uint32_t)0x0000000F) /*!<ETR_RMP[3:0] bits (TIM1 ETR remap) */
+#define TIM1_OR_ETR_RMP_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM1_OR_ETR_RMP_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM1_OR_ETR_RMP_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM1_OR_ETR_RMP_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+/******************* Bit definition for TIM8_OR register ********************/
+#define TIM8_OR_ETR_RMP ((uint32_t)0x0000000F) /*!<ETR_RMP[3:0] bits (TIM8 ETR remap) */
+#define TIM8_OR_ETR_RMP_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM8_OR_ETR_RMP_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM8_OR_ETR_RMP_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM8_OR_ETR_RMP_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+/******************* Bit definition for TIM20_OR register *******************/
+#define TIM20_OR_ETR_RMP ((uint32_t)0x0000000F) /*!<ETR_RMP[3:0] bits (TIM20 ETR remap) */
+#define TIM20_OR_ETR_RMP_0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define TIM20_OR_ETR_RMP_1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define TIM20_OR_ETR_RMP_2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define TIM20_OR_ETR_RMP_3 ((uint32_t)0x00000008) /*!<Bit 3 */
+
+/****************** Bit definition for TIM_CCMR3 register *******************/
+#define TIM_CCMR3_OC5FE ((uint32_t)0x00000004) /*!<Output Compare 5 Fast enable */
+#define TIM_CCMR3_OC5PE ((uint32_t)0x00000008) /*!<Output Compare 5 Preload enable */
+
+#define TIM_CCMR3_OC5M ((uint32_t)0x00010070) /*!<OC5M[2:0] bits (Output Compare 5 Mode) */
+#define TIM_CCMR3_OC5M_0 ((uint32_t)0x00000010) /*!<Bit 0 */
+#define TIM_CCMR3_OC5M_1 ((uint32_t)0x00000020) /*!<Bit 1 */
+#define TIM_CCMR3_OC5M_2 ((uint32_t)0x00000040) /*!<Bit 2 */
+#define TIM_CCMR3_OC5M_3 ((uint32_t)0x00010000) /*!<Bit 3 */
+
+#define TIM_CCMR3_OC5CE ((uint32_t)0x00000080) /*!<Output Compare 5 Clear Enable */
+
+#define TIM_CCMR3_OC6FE ((uint32_t)0x00000400) /*!<Output Compare 6 Fast enable */
+#define TIM_CCMR3_OC6PE ((uint32_t)0x00000800) /*!<Output Compare 6 Preload enable */
+
+#define TIM_CCMR3_OC6M ((uint32_t)0x01007000) /*!<OC6M[2:0] bits (Output Compare 6 Mode) */
+#define TIM_CCMR3_OC6M_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TIM_CCMR3_OC6M_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TIM_CCMR3_OC6M_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+#define TIM_CCMR3_OC6M_3 ((uint32_t)0x01000000) /*!<Bit 3 */
+
+#define TIM_CCMR3_OC6CE ((uint32_t)0x00008000) /*!<Output Compare 6 Clear Enable */
+
+/******************************************************************************/
+/* */
+/* Touch Sensing Controller (TSC) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for TSC_CR register *********************/
+#define TSC_CR_TSCE ((uint32_t)0x00000001) /*!<Touch sensing controller enable */
+#define TSC_CR_START ((uint32_t)0x00000002) /*!<Start acquisition */
+#define TSC_CR_AM ((uint32_t)0x00000004) /*!<Acquisition mode */
+#define TSC_CR_SYNCPOL ((uint32_t)0x00000008) /*!<Synchronization pin polarity */
+#define TSC_CR_IODEF ((uint32_t)0x00000010) /*!<IO default mode */
+
+#define TSC_CR_MCV ((uint32_t)0x000000E0) /*!<MCV[2:0] bits (Max Count Value) */
+#define TSC_CR_MCV_0 ((uint32_t)0x00000020) /*!<Bit 0 */
+#define TSC_CR_MCV_1 ((uint32_t)0x00000040) /*!<Bit 1 */
+#define TSC_CR_MCV_2 ((uint32_t)0x00000080) /*!<Bit 2 */
+
+#define TSC_CR_PGPSC ((uint32_t)0x00007000) /*!<PGPSC[2:0] bits (Pulse Generator Prescaler) */
+#define TSC_CR_PGPSC_0 ((uint32_t)0x00001000) /*!<Bit 0 */
+#define TSC_CR_PGPSC_1 ((uint32_t)0x00002000) /*!<Bit 1 */
+#define TSC_CR_PGPSC_2 ((uint32_t)0x00004000) /*!<Bit 2 */
+
+#define TSC_CR_SSPSC ((uint32_t)0x00008000) /*!<Spread Spectrum Prescaler */
+#define TSC_CR_SSE ((uint32_t)0x00010000) /*!<Spread Spectrum Enable */
+
+#define TSC_CR_SSD ((uint32_t)0x00FE0000) /*!<SSD[6:0] bits (Spread Spectrum Deviation) */
+#define TSC_CR_SSD_0 ((uint32_t)0x00020000) /*!<Bit 0 */
+#define TSC_CR_SSD_1 ((uint32_t)0x00040000) /*!<Bit 1 */
+#define TSC_CR_SSD_2 ((uint32_t)0x00080000) /*!<Bit 2 */
+#define TSC_CR_SSD_3 ((uint32_t)0x00100000) /*!<Bit 3 */
+#define TSC_CR_SSD_4 ((uint32_t)0x00200000) /*!<Bit 4 */
+#define TSC_CR_SSD_5 ((uint32_t)0x00400000) /*!<Bit 5 */
+#define TSC_CR_SSD_6 ((uint32_t)0x00800000) /*!<Bit 6 */
+
+#define TSC_CR_CTPL ((uint32_t)0x0F000000) /*!<CTPL[3:0] bits (Charge Transfer pulse low) */
+#define TSC_CR_CTPL_0 ((uint32_t)0x01000000) /*!<Bit 0 */
+#define TSC_CR_CTPL_1 ((uint32_t)0x02000000) /*!<Bit 1 */
+#define TSC_CR_CTPL_2 ((uint32_t)0x04000000) /*!<Bit 2 */
+#define TSC_CR_CTPL_3 ((uint32_t)0x08000000) /*!<Bit 3 */
+
+#define TSC_CR_CTPH ((uint32_t)0xF0000000) /*!<CTPH[3:0] bits (Charge Transfer pulse high) */
+#define TSC_CR_CTPH_0 ((uint32_t)0x10000000) /*!<Bit 0 */
+#define TSC_CR_CTPH_1 ((uint32_t)0x20000000) /*!<Bit 1 */
+#define TSC_CR_CTPH_2 ((uint32_t)0x40000000) /*!<Bit 2 */
+#define TSC_CR_CTPH_3 ((uint32_t)0x80000000) /*!<Bit 3 */
+
+/******************* Bit definition for TSC_IER register ********************/
+#define TSC_IER_EOAIE ((uint32_t)0x00000001) /*!<End of acquisition interrupt enable */
+#define TSC_IER_MCEIE ((uint32_t)0x00000002) /*!<Max count error interrupt enable */
+
+/******************* Bit definition for TSC_ICR register ********************/
+#define TSC_ICR_EOAIC ((uint32_t)0x00000001) /*!<End of acquisition interrupt clear */
+#define TSC_ICR_MCEIC ((uint32_t)0x00000002) /*!<Max count error interrupt clear */
+
+/******************* Bit definition for TSC_ISR register ********************/
+#define TSC_ISR_EOAF ((uint32_t)0x00000001) /*!<End of acquisition flag */
+#define TSC_ISR_MCEF ((uint32_t)0x00000002) /*!<Max count error flag */
+
+/******************* Bit definition for TSC_IOHCR register ******************/
+#define TSC_IOHCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 schmitt trigger hysteresis mode */
+#define TSC_IOHCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 schmitt trigger hysteresis mode */
+
+/******************* Bit definition for TSC_IOASCR register *****************/
+#define TSC_IOASCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 analog switch enable */
+#define TSC_IOASCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 analog switch enable */
+#define TSC_IOASCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 analog switch enable */
+#define TSC_IOASCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 analog switch enable */
+#define TSC_IOASCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 analog switch enable */
+#define TSC_IOASCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 analog switch enable */
+#define TSC_IOASCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 analog switch enable */
+#define TSC_IOASCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 analog switch enable */
+#define TSC_IOASCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 analog switch enable */
+#define TSC_IOASCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 analog switch enable */
+#define TSC_IOASCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 analog switch enable */
+#define TSC_IOASCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 analog switch enable */
+#define TSC_IOASCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 analog switch enable */
+#define TSC_IOASCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 analog switch enable */
+#define TSC_IOASCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 analog switch enable */
+#define TSC_IOASCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 analog switch enable */
+#define TSC_IOASCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 analog switch enable */
+#define TSC_IOASCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 analog switch enable */
+#define TSC_IOASCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 analog switch enable */
+#define TSC_IOASCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 analog switch enable */
+#define TSC_IOASCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 analog switch enable */
+#define TSC_IOASCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 analog switch enable */
+#define TSC_IOASCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 analog switch enable */
+#define TSC_IOASCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 analog switch enable */
+#define TSC_IOASCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 analog switch enable */
+#define TSC_IOASCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 analog switch enable */
+#define TSC_IOASCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 analog switch enable */
+#define TSC_IOASCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 analog switch enable */
+#define TSC_IOASCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 analog switch enable */
+#define TSC_IOASCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 analog switch enable */
+#define TSC_IOASCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 analog switch enable */
+#define TSC_IOASCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 analog switch enable */
+
+/******************* Bit definition for TSC_IOSCR register ******************/
+#define TSC_IOSCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 sampling mode */
+#define TSC_IOSCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 sampling mode */
+#define TSC_IOSCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 sampling mode */
+#define TSC_IOSCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 sampling mode */
+#define TSC_IOSCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 sampling mode */
+#define TSC_IOSCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 sampling mode */
+#define TSC_IOSCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 sampling mode */
+#define TSC_IOSCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 sampling mode */
+#define TSC_IOSCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 sampling mode */
+#define TSC_IOSCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 sampling mode */
+#define TSC_IOSCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 sampling mode */
+#define TSC_IOSCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 sampling mode */
+#define TSC_IOSCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 sampling mode */
+#define TSC_IOSCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 sampling mode */
+#define TSC_IOSCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 sampling mode */
+#define TSC_IOSCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 sampling mode */
+#define TSC_IOSCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 sampling mode */
+#define TSC_IOSCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 sampling mode */
+#define TSC_IOSCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 sampling mode */
+#define TSC_IOSCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 sampling mode */
+#define TSC_IOSCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 sampling mode */
+#define TSC_IOSCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 sampling mode */
+#define TSC_IOSCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 sampling mode */
+#define TSC_IOSCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 sampling mode */
+#define TSC_IOSCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 sampling mode */
+#define TSC_IOSCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 sampling mode */
+#define TSC_IOSCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 sampling mode */
+#define TSC_IOSCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 sampling mode */
+#define TSC_IOSCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 sampling mode */
+#define TSC_IOSCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 sampling mode */
+#define TSC_IOSCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 sampling mode */
+#define TSC_IOSCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 sampling mode */
+
+/******************* Bit definition for TSC_IOCCR register ******************/
+#define TSC_IOCCR_G1_IO1 ((uint32_t)0x00000001) /*!<GROUP1_IO1 channel mode */
+#define TSC_IOCCR_G1_IO2 ((uint32_t)0x00000002) /*!<GROUP1_IO2 channel mode */
+#define TSC_IOCCR_G1_IO3 ((uint32_t)0x00000004) /*!<GROUP1_IO3 channel mode */
+#define TSC_IOCCR_G1_IO4 ((uint32_t)0x00000008) /*!<GROUP1_IO4 channel mode */
+#define TSC_IOCCR_G2_IO1 ((uint32_t)0x00000010) /*!<GROUP2_IO1 channel mode */
+#define TSC_IOCCR_G2_IO2 ((uint32_t)0x00000020) /*!<GROUP2_IO2 channel mode */
+#define TSC_IOCCR_G2_IO3 ((uint32_t)0x00000040) /*!<GROUP2_IO3 channel mode */
+#define TSC_IOCCR_G2_IO4 ((uint32_t)0x00000080) /*!<GROUP2_IO4 channel mode */
+#define TSC_IOCCR_G3_IO1 ((uint32_t)0x00000100) /*!<GROUP3_IO1 channel mode */
+#define TSC_IOCCR_G3_IO2 ((uint32_t)0x00000200) /*!<GROUP3_IO2 channel mode */
+#define TSC_IOCCR_G3_IO3 ((uint32_t)0x00000400) /*!<GROUP3_IO3 channel mode */
+#define TSC_IOCCR_G3_IO4 ((uint32_t)0x00000800) /*!<GROUP3_IO4 channel mode */
+#define TSC_IOCCR_G4_IO1 ((uint32_t)0x00001000) /*!<GROUP4_IO1 channel mode */
+#define TSC_IOCCR_G4_IO2 ((uint32_t)0x00002000) /*!<GROUP4_IO2 channel mode */
+#define TSC_IOCCR_G4_IO3 ((uint32_t)0x00004000) /*!<GROUP4_IO3 channel mode */
+#define TSC_IOCCR_G4_IO4 ((uint32_t)0x00008000) /*!<GROUP4_IO4 channel mode */
+#define TSC_IOCCR_G5_IO1 ((uint32_t)0x00010000) /*!<GROUP5_IO1 channel mode */
+#define TSC_IOCCR_G5_IO2 ((uint32_t)0x00020000) /*!<GROUP5_IO2 channel mode */
+#define TSC_IOCCR_G5_IO3 ((uint32_t)0x00040000) /*!<GROUP5_IO3 channel mode */
+#define TSC_IOCCR_G5_IO4 ((uint32_t)0x00080000) /*!<GROUP5_IO4 channel mode */
+#define TSC_IOCCR_G6_IO1 ((uint32_t)0x00100000) /*!<GROUP6_IO1 channel mode */
+#define TSC_IOCCR_G6_IO2 ((uint32_t)0x00200000) /*!<GROUP6_IO2 channel mode */
+#define TSC_IOCCR_G6_IO3 ((uint32_t)0x00400000) /*!<GROUP6_IO3 channel mode */
+#define TSC_IOCCR_G6_IO4 ((uint32_t)0x00800000) /*!<GROUP6_IO4 channel mode */
+#define TSC_IOCCR_G7_IO1 ((uint32_t)0x01000000) /*!<GROUP7_IO1 channel mode */
+#define TSC_IOCCR_G7_IO2 ((uint32_t)0x02000000) /*!<GROUP7_IO2 channel mode */
+#define TSC_IOCCR_G7_IO3 ((uint32_t)0x04000000) /*!<GROUP7_IO3 channel mode */
+#define TSC_IOCCR_G7_IO4 ((uint32_t)0x08000000) /*!<GROUP7_IO4 channel mode */
+#define TSC_IOCCR_G8_IO1 ((uint32_t)0x10000000) /*!<GROUP8_IO1 channel mode */
+#define TSC_IOCCR_G8_IO2 ((uint32_t)0x20000000) /*!<GROUP8_IO2 channel mode */
+#define TSC_IOCCR_G8_IO3 ((uint32_t)0x40000000) /*!<GROUP8_IO3 channel mode */
+#define TSC_IOCCR_G8_IO4 ((uint32_t)0x80000000) /*!<GROUP8_IO4 channel mode */
+
+/******************* Bit definition for TSC_IOGCSR register *****************/
+#define TSC_IOGCSR_G1E ((uint32_t)0x00000001) /*!<Analog IO GROUP1 enable */
+#define TSC_IOGCSR_G2E ((uint32_t)0x00000002) /*!<Analog IO GROUP2 enable */
+#define TSC_IOGCSR_G3E ((uint32_t)0x00000004) /*!<Analog IO GROUP3 enable */
+#define TSC_IOGCSR_G4E ((uint32_t)0x00000008) /*!<Analog IO GROUP4 enable */
+#define TSC_IOGCSR_G5E ((uint32_t)0x00000010) /*!<Analog IO GROUP5 enable */
+#define TSC_IOGCSR_G6E ((uint32_t)0x00000020) /*!<Analog IO GROUP6 enable */
+#define TSC_IOGCSR_G7E ((uint32_t)0x00000040) /*!<Analog IO GROUP7 enable */
+#define TSC_IOGCSR_G8E ((uint32_t)0x00000080) /*!<Analog IO GROUP8 enable */
+#define TSC_IOGCSR_G1S ((uint32_t)0x00010000) /*!<Analog IO GROUP1 status */
+#define TSC_IOGCSR_G2S ((uint32_t)0x00020000) /*!<Analog IO GROUP2 status */
+#define TSC_IOGCSR_G3S ((uint32_t)0x00040000) /*!<Analog IO GROUP3 status */
+#define TSC_IOGCSR_G4S ((uint32_t)0x00080000) /*!<Analog IO GROUP4 status */
+#define TSC_IOGCSR_G5S ((uint32_t)0x00100000) /*!<Analog IO GROUP5 status */
+#define TSC_IOGCSR_G6S ((uint32_t)0x00200000) /*!<Analog IO GROUP6 status */
+#define TSC_IOGCSR_G7S ((uint32_t)0x00400000) /*!<Analog IO GROUP7 status */
+#define TSC_IOGCSR_G8S ((uint32_t)0x00800000) /*!<Analog IO GROUP8 status */
+
+/******************* Bit definition for TSC_IOGXCR register *****************/
+#define TSC_IOGXCR_CNT ((uint32_t)0x00003FFF) /*!<CNT[13:0] bits (Counter value) */
+
+/******************************************************************************/
+/* */
+/* Universal Synchronous Asynchronous Receiver Transmitter (USART) */
+/* */
+/******************************************************************************/
+/****************** Bit definition for USART_CR1 register *******************/
+#define USART_CR1_UE ((uint32_t)0x00000001) /*!< USART Enable */
+#define USART_CR1_UESM ((uint32_t)0x00000002) /*!< USART Enable in STOP Mode */
+#define USART_CR1_RE ((uint32_t)0x00000004) /*!< Receiver Enable */
+#define USART_CR1_TE ((uint32_t)0x00000008) /*!< Transmitter Enable */
+#define USART_CR1_IDLEIE ((uint32_t)0x00000010) /*!< IDLE Interrupt Enable */
+#define USART_CR1_RXNEIE ((uint32_t)0x00000020) /*!< RXNE Interrupt Enable */
+#define USART_CR1_TCIE ((uint32_t)0x00000040) /*!< Transmission Complete Interrupt Enable */
+#define USART_CR1_TXEIE ((uint32_t)0x00000080) /*!< TXE Interrupt Enable */
+#define USART_CR1_PEIE ((uint32_t)0x00000100) /*!< PE Interrupt Enable */
+#define USART_CR1_PS ((uint32_t)0x00000200) /*!< Parity Selection */
+#define USART_CR1_PCE ((uint32_t)0x00000400) /*!< Parity Control Enable */
+#define USART_CR1_WAKE ((uint32_t)0x00000800) /*!< Receiver Wakeup method */
+#define USART_CR1_M0 ((uint32_t)0x00001000) /*!< Word length bit 0 */
+#define USART_CR1_MME ((uint32_t)0x00002000) /*!< Mute Mode Enable */
+#define USART_CR1_CMIE ((uint32_t)0x00004000) /*!< Character match interrupt enable */
+#define USART_CR1_OVER8 ((uint32_t)0x00008000) /*!< Oversampling by 8-bit or 16-bit mode */
+#define USART_CR1_DEDT ((uint32_t)0x001F0000) /*!< DEDT[4:0] bits (Driver Enable Deassertion Time) */
+#define USART_CR1_DEDT_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define USART_CR1_DEDT_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define USART_CR1_DEDT_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define USART_CR1_DEDT_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define USART_CR1_DEDT_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define USART_CR1_DEAT ((uint32_t)0x03E00000) /*!< DEAT[4:0] bits (Driver Enable Assertion Time) */
+#define USART_CR1_DEAT_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR1_DEAT_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR1_DEAT_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+#define USART_CR1_DEAT_3 ((uint32_t)0x01000000) /*!< Bit 3 */
+#define USART_CR1_DEAT_4 ((uint32_t)0x02000000) /*!< Bit 4 */
+#define USART_CR1_RTOIE ((uint32_t)0x04000000) /*!< Receive Time Out interrupt enable */
+#define USART_CR1_EOBIE ((uint32_t)0x08000000) /*!< End of Block interrupt enable */
+#define USART_CR1_M1 ((uint32_t)0x10000000) /*!< Word length bit 1 */
+#define USART_CR1_M ((uint32_t)0x10001000) /*!< [M1:M0] Word length */
+
+/****************** Bit definition for USART_CR2 register *******************/
+#define USART_CR2_ADDM7 ((uint32_t)0x00000010) /*!< 7-bit or 4-bit Address Detection */
+#define USART_CR2_LBDL ((uint32_t)0x00000020) /*!< LIN Break Detection Length */
+#define USART_CR2_LBDIE ((uint32_t)0x00000040) /*!< LIN Break Detection Interrupt Enable */
+#define USART_CR2_LBCL ((uint32_t)0x00000100) /*!< Last Bit Clock pulse */
+#define USART_CR2_CPHA ((uint32_t)0x00000200) /*!< Clock Phase */
+#define USART_CR2_CPOL ((uint32_t)0x00000400) /*!< Clock Polarity */
+#define USART_CR2_CLKEN ((uint32_t)0x00000800) /*!< Clock Enable */
+#define USART_CR2_STOP ((uint32_t)0x00003000) /*!< STOP[1:0] bits (STOP bits) */
+#define USART_CR2_STOP_0 ((uint32_t)0x00001000) /*!< Bit 0 */
+#define USART_CR2_STOP_1 ((uint32_t)0x00002000) /*!< Bit 1 */
+#define USART_CR2_LINEN ((uint32_t)0x00004000) /*!< LIN mode enable */
+#define USART_CR2_SWAP ((uint32_t)0x00008000) /*!< SWAP TX/RX pins */
+#define USART_CR2_RXINV ((uint32_t)0x00010000) /*!< RX pin active level inversion */
+#define USART_CR2_TXINV ((uint32_t)0x00020000) /*!< TX pin active level inversion */
+#define USART_CR2_DATAINV ((uint32_t)0x00040000) /*!< Binary data inversion */
+#define USART_CR2_MSBFIRST ((uint32_t)0x00080000) /*!< Most Significant Bit First */
+#define USART_CR2_ABREN ((uint32_t)0x00100000) /*!< Auto Baud-Rate Enable*/
+#define USART_CR2_ABRMODE ((uint32_t)0x00600000) /*!< ABRMOD[1:0] bits (Auto Baud-Rate Mode) */
+#define USART_CR2_ABRMODE_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define USART_CR2_ABRMODE_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define USART_CR2_RTOEN ((uint32_t)0x00800000) /*!< Receiver Time-Out enable */
+#define USART_CR2_ADD ((uint32_t)0xFF000000) /*!< Address of the USART node */
+
+/****************** Bit definition for USART_CR3 register *******************/
+#define USART_CR3_EIE ((uint32_t)0x00000001) /*!< Error Interrupt Enable */
+#define USART_CR3_IREN ((uint32_t)0x00000002) /*!< IrDA mode Enable */
+#define USART_CR3_IRLP ((uint32_t)0x00000004) /*!< IrDA Low-Power */
+#define USART_CR3_HDSEL ((uint32_t)0x00000008) /*!< Half-Duplex Selection */
+#define USART_CR3_NACK ((uint32_t)0x00000010) /*!< SmartCard NACK enable */
+#define USART_CR3_SCEN ((uint32_t)0x00000020) /*!< SmartCard mode enable */
+#define USART_CR3_DMAR ((uint32_t)0x00000040) /*!< DMA Enable Receiver */
+#define USART_CR3_DMAT ((uint32_t)0x00000080) /*!< DMA Enable Transmitter */
+#define USART_CR3_RTSE ((uint32_t)0x00000100) /*!< RTS Enable */
+#define USART_CR3_CTSE ((uint32_t)0x00000200) /*!< CTS Enable */
+#define USART_CR3_CTSIE ((uint32_t)0x00000400) /*!< CTS Interrupt Enable */
+#define USART_CR3_ONEBIT ((uint32_t)0x00000800) /*!< One sample bit method enable */
+#define USART_CR3_OVRDIS ((uint32_t)0x00001000) /*!< Overrun Disable */
+#define USART_CR3_DDRE ((uint32_t)0x00002000) /*!< DMA Disable on Reception Error */
+#define USART_CR3_DEM ((uint32_t)0x00004000) /*!< Driver Enable Mode */
+#define USART_CR3_DEP ((uint32_t)0x00008000) /*!< Driver Enable Polarity Selection */
+#define USART_CR3_SCARCNT ((uint32_t)0x000E0000) /*!< SCARCNT[2:0] bits (SmartCard Auto-Retry Count) */
+#define USART_CR3_SCARCNT_0 ((uint32_t)0x00020000) /*!< Bit 0 */
+#define USART_CR3_SCARCNT_1 ((uint32_t)0x00040000) /*!< Bit 1 */
+#define USART_CR3_SCARCNT_2 ((uint32_t)0x00080000) /*!< Bit 2 */
+#define USART_CR3_WUS ((uint32_t)0x00300000) /*!< WUS[1:0] bits (Wake UP Interrupt Flag Selection) */
+#define USART_CR3_WUS_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define USART_CR3_WUS_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define USART_CR3_WUFIE ((uint32_t)0x00400000) /*!< Wake Up Interrupt Enable */
+
+/****************** Bit definition for USART_BRR register *******************/
+#define USART_BRR_DIV_FRACTION ((uint32_t)0x0000000F) /*!< Fraction of USARTDIV */
+#define USART_BRR_DIV_MANTISSA ((uint32_t)0x0000FFF0) /*!< Mantissa of USARTDIV */
+
+/****************** Bit definition for USART_GTPR register ******************/
+#define USART_GTPR_PSC ((uint32_t)0x000000FF) /*!< PSC[7:0] bits (Prescaler value) */
+#define USART_GTPR_GT ((uint32_t)0x0000FF00) /*!< GT[7:0] bits (Guard time value) */
+
+
+/******************* Bit definition for USART_RTOR register *****************/
+#define USART_RTOR_RTO ((uint32_t)0x00FFFFFF) /*!< Receiver Time Out Value */
+#define USART_RTOR_BLEN ((uint32_t)0xFF000000) /*!< Block Length */
+
+/******************* Bit definition for USART_RQR register ******************/
+#define USART_RQR_ABRRQ ((uint32_t)0x00000001) /*!< Auto-Baud Rate Request */
+#define USART_RQR_SBKRQ ((uint32_t)0x00000002) /*!< Send Break Request */
+#define USART_RQR_MMRQ ((uint32_t)0x00000004) /*!< Mute Mode Request */
+#define USART_RQR_RXFRQ ((uint32_t)0x00000008) /*!< Receive Data flush Request */
+#define USART_RQR_TXFRQ ((uint32_t)0x00000010) /*!< Transmit data flush Request */
+
+/******************* Bit definition for USART_ISR register ******************/
+#define USART_ISR_PE ((uint32_t)0x00000001) /*!< Parity Error */
+#define USART_ISR_FE ((uint32_t)0x00000002) /*!< Framing Error */
+#define USART_ISR_NE ((uint32_t)0x00000004) /*!< Noise detected Flag */
+#define USART_ISR_ORE ((uint32_t)0x00000008) /*!< OverRun Error */
+#define USART_ISR_IDLE ((uint32_t)0x00000010) /*!< IDLE line detected */
+#define USART_ISR_RXNE ((uint32_t)0x00000020) /*!< Read Data Register Not Empty */
+#define USART_ISR_TC ((uint32_t)0x00000040) /*!< Transmission Complete */
+#define USART_ISR_TXE ((uint32_t)0x00000080) /*!< Transmit Data Register Empty */
+#define USART_ISR_LBDF ((uint32_t)0x00000100) /*!< LIN Break Detection Flag */
+#define USART_ISR_CTSIF ((uint32_t)0x00000200) /*!< CTS interrupt flag */
+#define USART_ISR_CTS ((uint32_t)0x00000400) /*!< CTS flag */
+#define USART_ISR_RTOF ((uint32_t)0x00000800) /*!< Receiver Time Out */
+#define USART_ISR_EOBF ((uint32_t)0x00001000) /*!< End Of Block Flag */
+#define USART_ISR_ABRE ((uint32_t)0x00004000) /*!< Auto-Baud Rate Error */
+#define USART_ISR_ABRF ((uint32_t)0x00008000) /*!< Auto-Baud Rate Flag */
+#define USART_ISR_BUSY ((uint32_t)0x00010000) /*!< Busy Flag */
+#define USART_ISR_CMF ((uint32_t)0x00020000) /*!< Character Match Flag */
+#define USART_ISR_SBKF ((uint32_t)0x00040000) /*!< Send Break Flag */
+#define USART_ISR_RWU ((uint32_t)0x00080000) /*!< Receive Wake Up from mute mode Flag */
+#define USART_ISR_WUF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Flag */
+#define USART_ISR_TEACK ((uint32_t)0x00200000) /*!< Transmit Enable Acknowledge Flag */
+#define USART_ISR_REACK ((uint32_t)0x00400000) /*!< Receive Enable Acknowledge Flag */
+
+/******************* Bit definition for USART_ICR register ******************/
+#define USART_ICR_PECF ((uint32_t)0x00000001) /*!< Parity Error Clear Flag */
+#define USART_ICR_FECF ((uint32_t)0x00000002) /*!< Framing Error Clear Flag */
+#define USART_ICR_NCF ((uint32_t)0x00000004) /*!< Noise detected Clear Flag */
+#define USART_ICR_ORECF ((uint32_t)0x00000008) /*!< OverRun Error Clear Flag */
+#define USART_ICR_IDLECF ((uint32_t)0x00000010) /*!< IDLE line detected Clear Flag */
+#define USART_ICR_TCCF ((uint32_t)0x00000040) /*!< Transmission Complete Clear Flag */
+#define USART_ICR_LBDCF ((uint32_t)0x00000100) /*!< LIN Break Detection Clear Flag */
+#define USART_ICR_CTSCF ((uint32_t)0x00000200) /*!< CTS Interrupt Clear Flag */
+#define USART_ICR_RTOCF ((uint32_t)0x00000800) /*!< Receiver Time Out Clear Flag */
+#define USART_ICR_EOBCF ((uint32_t)0x00001000) /*!< End Of Block Clear Flag */
+#define USART_ICR_CMCF ((uint32_t)0x00020000) /*!< Character Match Clear Flag */
+#define USART_ICR_WUCF ((uint32_t)0x00100000) /*!< Wake Up from stop mode Clear Flag */
+
+/******************* Bit definition for USART_RDR register ******************/
+#define USART_RDR_RDR ((uint32_t)0x000001FF) /*!< RDR[8:0] bits (Receive Data value) */
+
+/******************* Bit definition for USART_TDR register ******************/
+#define USART_TDR_TDR ((uint32_t)0x000001FF) /*!< TDR[8:0] bits (Transmit Data value) */
+
+/******************************************************************************/
+/* */
+/* USB Device General registers */
+/* */
+/******************************************************************************/
+#define USB_CNTR (USB_BASE + 0x40) /*!< Control register */
+#define USB_ISTR (USB_BASE + 0x44) /*!< Interrupt status register */
+#define USB_FNR (USB_BASE + 0x48) /*!< Frame number register */
+#define USB_DADDR (USB_BASE + 0x4C) /*!< Device address register */
+#define USB_BTABLE (USB_BASE + 0x50) /*!< Buffer Table address register */
+#define USB_LPMCSR (USB_BASE + 0x54) /*!< LPM Control and Status register */
+
+/**************************** ISTR interrupt events *************************/
+#define USB_ISTR_CTR ((uint16_t)0x8000) /*!< Correct TRansfer (clear-only bit) */
+#define USB_ISTR_PMAOVRM ((uint16_t)0x4000) /*!< DMA OVeR/underrun (clear-only bit) */
+#define USB_ISTR_ERR ((uint16_t)0x2000) /*!< ERRor (clear-only bit) */
+#define USB_ISTR_WKUP ((uint16_t)0x1000) /*!< WaKe UP (clear-only bit) */
+#define USB_ISTR_SUSP ((uint16_t)0x0800) /*!< SUSPend (clear-only bit) */
+#define USB_ISTR_RESET ((uint16_t)0x0400) /*!< RESET (clear-only bit) */
+#define USB_ISTR_SOF ((uint16_t)0x0200) /*!< Start Of Frame (clear-only bit) */
+#define USB_ISTR_ESOF ((uint16_t)0x0100) /*!< Expected Start Of Frame (clear-only bit) */
+#define USB_ISTR_L1REQ ((uint16_t)0x0080) /*!< LPM L1 state request */
+#define USB_ISTR_DIR ((uint16_t)0x0010) /*!< DIRection of transaction (read-only bit) */
+#define USB_ISTR_EP_ID ((uint16_t)0x000F) /*!< EndPoint IDentifier (read-only bit) */
+
+#define USB_CLR_CTR (~USB_ISTR_CTR) /*!< clear Correct TRansfer bit */
+#define USB_CLR_PMAOVRM (~USB_ISTR_PMAOVR) /*!< clear DMA OVeR/underrun bit*/
+#define USB_CLR_ERR (~USB_ISTR_ERR) /*!< clear ERRor bit */
+#define USB_CLR_WKUP (~USB_ISTR_WKUP) /*!< clear WaKe UP bit */
+#define USB_CLR_SUSP (~USB_ISTR_SUSP) /*!< clear SUSPend bit */
+#define USB_CLR_RESET (~USB_ISTR_RESET) /*!< clear RESET bit */
+#define USB_CLR_SOF (~USB_ISTR_SOF) /*!< clear Start Of Frame bit */
+#define USB_CLR_ESOF (~USB_ISTR_ESOF) /*!< clear Expected Start Of Frame bit */
+#define USB_CLR_L1REQ (~USB_ISTR_L1REQ) /*!< clear LPM L1 bit */
+
+/************************* CNTR control register bits definitions ***********/
+#define USB_CNTR_CTRM ((uint16_t)0x8000) /*!< Correct TRansfer Mask */
+#define USB_CNTR_PMAOVRM ((uint16_t)0x4000) /*!< DMA OVeR/underrun Mask */
+#define USB_CNTR_ERRM ((uint16_t)0x2000) /*!< ERRor Mask */
+#define USB_CNTR_WKUPM ((uint16_t)0x1000) /*!< WaKe UP Mask */
+#define USB_CNTR_SUSPM ((uint16_t)0x0800) /*!< SUSPend Mask */
+#define USB_CNTR_RESETM ((uint16_t)0x0400) /*!< RESET Mask */
+#define USB_CNTR_SOFM ((uint16_t)0x0200) /*!< Start Of Frame Mask */
+#define USB_CNTR_ESOFM ((uint16_t)0x0100) /*!< Expected Start Of Frame Mask */
+#define USB_CNTR_L1REQM ((uint16_t)0x0080) /*!< LPM L1 state request interrupt mask */
+#define USB_CNTR_L1RESUME ((uint16_t)0x0020) /*!< LPM L1 Resume request */
+#define USB_CNTR_RESUME ((uint16_t)0x0010) /*!< RESUME request */
+#define USB_CNTR_FSUSP ((uint16_t)0x0008) /*!< Force SUSPend */
+#define USB_CNTR_LP_MODE ((uint16_t)0x0004) /*!< Low-power MODE */
+#define USB_CNTR_PDWN ((uint16_t)0x0002) /*!< Power DoWN */
+#define USB_CNTR_FRES ((uint16_t)0x0001) /*!< Force USB RESet */
+
+/*************************** LPM register bits definitions ******************/
+#define USB_LPMCSR_BESL ((uint16_t)0x00F0) /*!< BESL value received with last ACKed LPM Token */
+#define USB_LPMCSR_REMWAKE ((uint16_t)0x0008) /*!< bRemoteWake value received with last ACKed LPM Token */
+#define USB_LPMCSR_LPMACK ((uint16_t)0x0002) /*!< LPM Token acknowledge enable*/
+#define USB_LPMCSR_LMPEN ((uint16_t)0x0001) /*!< LPM support enable */
+
+/******************** FNR Frame Number Register bit definitions ************/
+#define USB_FNR_RXDP ((uint16_t)0x8000) /*!< status of D+ data line */
+#define USB_FNR_RXDM ((uint16_t)0x4000) /*!< status of D- data line */
+#define USB_FNR_LCK ((uint16_t)0x2000) /*!< LoCKed */
+#define USB_FNR_LSOF ((uint16_t)0x1800) /*!< Lost SOF */
+#define USB_FNR_FN ((uint16_t)0x07FF) /*!< Frame Number */
+
+/******************** DADDR Device ADDRess bit definitions ****************/
+#define USB_DADDR_EF ((uint8_t)0x80) /*!< USB device address Enable Function */
+#define USB_DADDR_ADD ((uint8_t)0x7F) /*!< USB device address */
+
+/****************************** Endpoint register *************************/
+#define USB_EP0R USB_BASE /*!< endpoint 0 register address */
+#define USB_EP1R (USB_BASE + 0x04) /*!< endpoint 1 register address */
+#define USB_EP2R (USB_BASE + 0x08) /*!< endpoint 2 register address */
+#define USB_EP3R (USB_BASE + 0x0C) /*!< endpoint 3 register address */
+#define USB_EP4R (USB_BASE + 0x10) /*!< endpoint 4 register address */
+#define USB_EP5R (USB_BASE + 0x14) /*!< endpoint 5 register address */
+#define USB_EP6R (USB_BASE + 0x18) /*!< endpoint 6 register address */
+#define USB_EP7R (USB_BASE + 0x1C) /*!< endpoint 7 register address */
+/* bit positions */
+#define USB_EP_CTR_RX ((uint16_t)0x8000) /*!< EndPoint Correct TRansfer RX */
+#define USB_EP_DTOG_RX ((uint16_t)0x4000) /*!< EndPoint Data TOGGLE RX */
+#define USB_EPRX_STAT ((uint16_t)0x3000) /*!< EndPoint RX STATus bit field */
+#define USB_EP_SETUP ((uint16_t)0x0800) /*!< EndPoint SETUP */
+#define USB_EP_T_FIELD ((uint16_t)0x0600) /*!< EndPoint TYPE */
+#define USB_EP_KIND ((uint16_t)0x0100) /*!< EndPoint KIND */
+#define USB_EP_CTR_TX ((uint16_t)0x0080) /*!< EndPoint Correct TRansfer TX */
+#define USB_EP_DTOG_TX ((uint16_t)0x0040) /*!< EndPoint Data TOGGLE TX */
+#define USB_EPTX_STAT ((uint16_t)0x0030) /*!< EndPoint TX STATus bit field */
+#define USB_EPADDR_FIELD ((uint16_t)0x000F) /*!< EndPoint ADDRess FIELD */
+
+/* EndPoint REGister MASK (no toggle fields) */
+#define USB_EPREG_MASK (USB_EP_CTR_RX|USB_EP_SETUP|USB_EP_T_FIELD|USB_EP_KIND|USB_EP_CTR_TX|USB_EPADDR_FIELD)
+ /*!< EP_TYPE[1:0] EndPoint TYPE */
+#define USB_EP_TYPE_MASK ((uint16_t)0x0600) /*!< EndPoint TYPE Mask */
+#define USB_EP_BULK ((uint16_t)0x0000) /*!< EndPoint BULK */
+#define USB_EP_CONTROL ((uint16_t)0x0200) /*!< EndPoint CONTROL */
+#define USB_EP_ISOCHRONOUS ((uint16_t)0x0400) /*!< EndPoint ISOCHRONOUS */
+#define USB_EP_INTERRUPT ((uint16_t)0x0600) /*!< EndPoint INTERRUPT */
+#define USB_EP_T_MASK (~USB_EP_T_FIELD & USB_EPREG_MASK)
+
+#define USB_EPKIND_MASK (~USB_EP_KIND & USB_EPREG_MASK) /*!< EP_KIND EndPoint KIND */
+ /*!< STAT_TX[1:0] STATus for TX transfer */
+#define USB_EP_TX_DIS ((uint16_t)0x0000) /*!< EndPoint TX DISabled */
+#define USB_EP_TX_STALL ((uint16_t)0x0010) /*!< EndPoint TX STALLed */
+#define USB_EP_TX_NAK ((uint16_t)0x0020) /*!< EndPoint TX NAKed */
+#define USB_EP_TX_VALID ((uint16_t)0x0030) /*!< EndPoint TX VALID */
+#define USB_EPTX_DTOG1 ((uint16_t)0x0010) /*!< EndPoint TX Data TOGgle bit1 */
+#define USB_EPTX_DTOG2 ((uint16_t)0x0020) /*!< EndPoint TX Data TOGgle bit2 */
+#define USB_EPTX_DTOGMASK (USB_EPTX_STAT|USB_EPREG_MASK)
+ /*!< STAT_RX[1:0] STATus for RX transfer */
+#define USB_EP_RX_DIS ((uint16_t)0x0000) /*!< EndPoint RX DISabled */
+#define USB_EP_RX_STALL ((uint16_t)0x1000) /*!< EndPoint RX STALLed */
+#define USB_EP_RX_NAK ((uint16_t)0x2000) /*!< EndPoint RX NAKed */
+#define USB_EP_RX_VALID ((uint16_t)0x3000) /*!< EndPoint RX VALID */
+#define USB_EPRX_DTOG1 ((uint16_t)0x1000) /*!< EndPoint RX Data TOGgle bit1 */
+#define USB_EPRX_DTOG2 ((uint16_t)0x2000) /*!< EndPoint RX Data TOGgle bit1 */
+#define USB_EPRX_DTOGMASK (USB_EPRX_STAT|USB_EPREG_MASK)
+
+/******************************************************************************/
+/* */
+/* Window WATCHDOG */
+/* */
+/******************************************************************************/
+/******************* Bit definition for WWDG_CR register ********************/
+#define WWDG_CR_T ((uint32_t)0x0000007F) /*!<T[6:0] bits (7-Bit counter (MSB to LSB)) */
+#define WWDG_CR_T0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define WWDG_CR_T1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define WWDG_CR_T2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define WWDG_CR_T3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define WWDG_CR_T4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define WWDG_CR_T5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define WWDG_CR_T6 ((uint32_t)0x00000040) /*!<Bit 6 */
+
+#define WWDG_CR_WDGA ((uint32_t)0x00000080) /*!<Activation bit */
+
+/******************* Bit definition for WWDG_CFR register *******************/
+#define WWDG_CFR_W ((uint32_t)0x0000007F) /*!<W[6:0] bits (7-bit window value) */
+#define WWDG_CFR_W0 ((uint32_t)0x00000001) /*!<Bit 0 */
+#define WWDG_CFR_W1 ((uint32_t)0x00000002) /*!<Bit 1 */
+#define WWDG_CFR_W2 ((uint32_t)0x00000004) /*!<Bit 2 */
+#define WWDG_CFR_W3 ((uint32_t)0x00000008) /*!<Bit 3 */
+#define WWDG_CFR_W4 ((uint32_t)0x00000010) /*!<Bit 4 */
+#define WWDG_CFR_W5 ((uint32_t)0x00000020) /*!<Bit 5 */
+#define WWDG_CFR_W6 ((uint32_t)0x00000040) /*!<Bit 6 */
+
+#define WWDG_CFR_WDGTB ((uint32_t)0x00000180) /*!<WDGTB[1:0] bits (Timer Base) */
+#define WWDG_CFR_WDGTB0 ((uint32_t)0x00000080) /*!<Bit 0 */
+#define WWDG_CFR_WDGTB1 ((uint32_t)0x00000100) /*!<Bit 1 */
+
+#define WWDG_CFR_EWI ((uint32_t)0x00000200) /*!<Early Wakeup Interrupt */
+
+/******************* Bit definition for WWDG_SR register ********************/
+#define WWDG_SR_EWIF ((uint32_t)0x00000001) /*!<Early Wakeup Interrupt Flag */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/** @addtogroup Exported_macros
+ * @{
+ */
+
+/****************************** ADC Instances *********************************/
+#define IS_ADC_ALL_INSTANCE(INSTANCE) (((INSTANCE) == ADC1) || \
+ ((INSTANCE) == ADC2) || \
+ ((INSTANCE) == ADC3) || \
+ ((INSTANCE) == ADC4))
+
+#define IS_ADC_MULTIMODE_MASTER_INSTANCE(INSTANCE) (((INSTANCE) == ADC1) || \
+ ((INSTANCE) == ADC3))
+
+#define IS_ADC_COMMON_INSTANCE(INSTANCE) (((INSTANCE) == ADC1_2_COMMON) || \
+ ((INSTANCE) == ADC3_4_COMMON))
+
+/****************************** CAN Instances *********************************/
+#define IS_CAN_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CAN)
+
+/****************************** COMP Instances ********************************/
+#define IS_COMP_ALL_INSTANCE(INSTANCE) (((INSTANCE) == COMP1) || \
+ ((INSTANCE) == COMP2) || \
+ ((INSTANCE) == COMP3) || \
+ ((INSTANCE) == COMP4) || \
+ ((INSTANCE) == COMP5) || \
+ ((INSTANCE) == COMP6) || \
+ ((INSTANCE) == COMP7))
+
+/******************** COMP Instances with window mode capability **************/
+#define IS_COMP_WINDOWMODE_INSTANCE(INSTANCE) (((INSTANCE) == COMP2) || \
+ ((INSTANCE) == COMP4) || \
+ ((INSTANCE) == COMP6))
+
+/****************************** CRC Instances *********************************/
+#define IS_CRC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == CRC)
+
+/****************************** DAC Instances *********************************/
+#define IS_DAC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == DAC1)
+
+#define IS_DAC_CHANNEL_INSTANCE(INSTANCE, CHANNEL) \
+ (((INSTANCE) == DAC1) && \
+ (((CHANNEL) == DAC_CHANNEL_1) || \
+ ((CHANNEL) == DAC_CHANNEL_2)))
+
+/****************************** DMA Instances *********************************/
+#define IS_DMA_ALL_INSTANCE(INSTANCE) (((INSTANCE) == DMA1_Channel1) || \
+ ((INSTANCE) == DMA1_Channel2) || \
+ ((INSTANCE) == DMA1_Channel3) || \
+ ((INSTANCE) == DMA1_Channel4) || \
+ ((INSTANCE) == DMA1_Channel5) || \
+ ((INSTANCE) == DMA1_Channel6) || \
+ ((INSTANCE) == DMA1_Channel7) || \
+ ((INSTANCE) == DMA2_Channel1) || \
+ ((INSTANCE) == DMA2_Channel2) || \
+ ((INSTANCE) == DMA2_Channel3) || \
+ ((INSTANCE) == DMA2_Channel4) || \
+ ((INSTANCE) == DMA2_Channel5))
+
+/****************************** GPIO Instances ********************************/
+#define IS_GPIO_ALL_INSTANCE(INSTANCE) (((INSTANCE) == GPIOA) || \
+ ((INSTANCE) == GPIOB) || \
+ ((INSTANCE) == GPIOC) || \
+ ((INSTANCE) == GPIOD) || \
+ ((INSTANCE) == GPIOE) || \
+ ((INSTANCE) == GPIOF) || \
+ ((INSTANCE) == GPIOG) || \
+ ((INSTANCE) == GPIOH))
+
+/****************************** I2C Instances *********************************/
+#define IS_I2C_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
+ ((INSTANCE) == I2C2) || \
+ ((INSTANCE) == I2C3))
+
+/****************************** I2S Instances *********************************/
+#define IS_I2S_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3))
+
+/****************************** IWDG Instances ********************************/
+#define IS_IWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == IWDG)
+
+/****************************** OPAMP Instances *******************************/
+#define IS_OPAMP_ALL_INSTANCE(INSTANCE) (((INSTANCE) == OPAMP1) || \
+ ((INSTANCE) == OPAMP2) || \
+ ((INSTANCE) == OPAMP3) || \
+ ((INSTANCE) == OPAMP4))
+
+/****************************** RTC Instances *********************************/
+#define IS_RTC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == RTC)
+
+/****************************** SMBUS Instances *******************************/
+#define IS_SMBUS_ALL_INSTANCE(INSTANCE) (((INSTANCE) == I2C1) || \
+ ((INSTANCE) == I2C2) || \
+ ((INSTANCE) == I2C3))
+
+/****************************** SPI Instances *********************************/
+#define IS_SPI_ALL_INSTANCE(INSTANCE) (((INSTANCE) == SPI1) || \
+ ((INSTANCE) == SPI2) || \
+ ((INSTANCE) == SPI3) || \
+ ((INSTANCE) == SPI4))
+
+/******************* TIM Instances : All supported instances ******************/
+#define IS_TIM_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17) || \
+ ((INSTANCE) == TIM20))
+
+/******************* TIM Instances : at least 1 capture/compare channel *******/
+#define IS_TIM_CC1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : at least 2 capture/compare channels *******/
+#define IS_TIM_CC2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : at least 3 capture/compare channels *******/
+#define IS_TIM_CC3_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : at least 4 capture/compare channels *******/
+#define IS_TIM_CC4_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : at least 5 capture/compare channels *******/
+#define IS_TIM_CC5_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : at least 6 capture/compare channels *******/
+#define IS_TIM_CC6_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM20))
+
+/************************** TIM Instances : Advanced-control timers ***********/
+
+/****************** TIM Instances : supporting clock selection ****************/
+#define IS_TIM_CLOCK_SELECT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : supporting external clock mode 1 for ETRF input */
+#define IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : supporting external clock mode 2 **********/
+#define IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : supporting external clock mode 1 for TIX inputs*/
+#define IS_TIM_CLOCKSOURCE_TIX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : supporting internal trigger inputs(ITRX) *******/
+#define IS_TIM_CLOCKSOURCE_ITRX_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : supporting OCxREF clear *******************/
+#define IS_TIM_OCXREF_CLEAR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : supporting encoder interface **************/
+#define IS_TIM_ENCODER_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : supporting Hall interface *****************/
+#define IS_TIM_HALL_INTERFACE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : supporting input XOR function *************/
+#define IS_TIM_XOR_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : supporting master mode ********************/
+#define IS_TIM_MASTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : supporting slave mode *********************/
+#define IS_TIM_SLAVE_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : supporting synchronization ****************/
+#define IS_TIM_SYNCHRO_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : supporting 32 bits counter ****************/
+#define IS_TIM_32B_COUNTER_INSTANCE(INSTANCE)\
+ ((INSTANCE) == TIM2)
+
+/****************** TIM Instances : supporting DMA burst **********************/
+#define IS_TIM_DMABURST_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : supporting the break function *************/
+#define IS_TIM_BREAK_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : supporting input/output channel(s) ********/
+#define IS_TIM_CCX_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4) || \
+ ((CHANNEL) == TIM_CHANNEL_5) || \
+ ((CHANNEL) == TIM_CHANNEL_6))) \
+ || \
+ (((INSTANCE) == TIM2) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM3) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM4) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4))) \
+ || \
+ (((INSTANCE) == TIM8) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4) || \
+ ((CHANNEL) == TIM_CHANNEL_5) || \
+ ((CHANNEL) == TIM_CHANNEL_6))) \
+ || \
+ (((INSTANCE) == TIM15) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ (((CHANNEL) == TIM_CHANNEL_1))) \
+ || \
+ (((INSTANCE) == TIM20) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4) || \
+ ((CHANNEL) == TIM_CHANNEL_5) || \
+ ((CHANNEL) == TIM_CHANNEL_6))))
+
+/****************** TIM Instances : supporting complementary output(s) ********/
+#define IS_TIM_CCXN_INSTANCE(INSTANCE, CHANNEL) \
+ ((((INSTANCE) == TIM1) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))) \
+ || \
+ (((INSTANCE) == TIM8) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))) \
+ || \
+ (((INSTANCE) == TIM15) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM16) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM17) && \
+ ((CHANNEL) == TIM_CHANNEL_1)) \
+ || \
+ (((INSTANCE) == TIM20) && \
+ (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))))
+
+/****************** TIM Instances : supporting counting mode selection ********/
+#define IS_TIM_COUNTER_MODE_SELECT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : supporting repetition counter *************/
+#define IS_TIM_REPETITION_COUNTER_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : supporting clock division *****************/
+#define IS_TIM_CLOCK_DIVISION_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : supporting 2 break inputs *****************/
+#define IS_TIM_BKIN2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : supporting ADC triggering through TRGO2 ***/
+#define IS_TIM_TRGO2_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : supporting DMA generation on Update events*/
+#define IS_TIM_DMA_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM6) || \
+ ((INSTANCE) == TIM7) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : supporting DMA generation on Capture/Compare events */
+#define IS_TIM_DMA_CC_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM2) || \
+ ((INSTANCE) == TIM3) || \
+ ((INSTANCE) == TIM4) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : supporting commutation event generation ***/
+#define IS_TIM_COMMUTATION_EVENT_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM15) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM17) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : supporting remapping capability ***********/
+#define IS_TIM_REMAP_INSTANCE(INSTANCE)\
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM16) || \
+ ((INSTANCE) == TIM20))
+
+/****************** TIM Instances : supporting combined 3-phase PWM mode ******/
+#define IS_TIM_COMBINED3PHASEPWM_INSTANCE(INSTANCE) \
+ (((INSTANCE) == TIM1) || \
+ ((INSTANCE) == TIM8) || \
+ ((INSTANCE) == TIM20))
+
+/****************************** TSC Instances *********************************/
+#define IS_TSC_ALL_INSTANCE(INSTANCE) ((INSTANCE) == TSC)
+
+/******************** USART Instances : Synchronous mode **********************/
+#define IS_USART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/****************** USART Instances : Auto Baud Rate detection ****************/
+#define IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/******************** UART Instances : Asynchronous mode **********************/
+#define IS_UART_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == UART4) || \
+ ((INSTANCE) == UART5))
+
+/******************** UART Instances : Half-Duplex mode **********************/
+#define IS_UART_HALFDUPLEX_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == UART4) || \
+ ((INSTANCE) == UART5))
+
+/******************** UART Instances : LIN mode **********************/
+#define IS_UART_LIN_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == UART4) || \
+ ((INSTANCE) == UART5))
+
+/******************** UART Instances : Wake-up from Stop mode **********************/
+#define IS_UART_WAKEUP_FROMSTOP_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == UART4) || \
+ ((INSTANCE) == UART5))
+
+/****************** UART Instances : Hardware Flow control ********************/
+#define IS_UART_HWFLOW_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/****************** UART Instances : Auto Baud Rate detection *****************/
+#define IS_UART_AUTOBAUDRATE_DETECTION_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/****************** UART Instances : Driver Enable ****************************/
+#define IS_UART_DRIVER_ENABLE_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/********************* UART Instances : Smard card mode ***********************/
+#define IS_SMARTCARD_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3))
+
+/*********************** UART Instances : IRDA mode ***************************/
+#define IS_IRDA_INSTANCE(INSTANCE) (((INSTANCE) == USART1) || \
+ ((INSTANCE) == USART2) || \
+ ((INSTANCE) == USART3) || \
+ ((INSTANCE) == UART4) || \
+ ((INSTANCE) == UART5))
+
+/****************************** USB Instances *********************************/
+#define IS_USB_ALL_INSTANCE(INSTANCE) ((INSTANCE) == USB)
+
+/****************************** WWDG Instances ********************************/
+#define IS_WWDG_ALL_INSTANCE(INSTANCE) ((INSTANCE) == WWDG)
+
+/**
+ * @}
+ */
+
+
+/******************************************************************************/
+/* For a painless codes migration between the STM32F3xx device product */
+/* lines, the aliases defined below are put in place to overcome the */
+/* differences in the interrupt handlers and IRQn definitions. */
+/* No need to update developed interrupt code when moving across */
+/* product lines within the same STM32F3 Family */
+/******************************************************************************/
+
+/* Aliases for __IRQn */
+
+#define ADC1_IRQn ADC1_2_IRQn
+#define CAN_TX_IRQn USB_HP_CAN_TX_IRQn
+#define CAN_RX0_IRQn USB_LP_CAN_RX0_IRQn
+#define TIM15_IRQn TIM1_BRK_TIM15_IRQn
+#define TIM16_IRQn TIM1_UP_TIM16_IRQn
+#define TIM17_IRQn TIM1_TRG_COM_TIM17_IRQn
+#define COMP_IRQn COMP1_2_3_IRQn
+#define COMP2_IRQn COMP1_2_3_IRQn
+#define COMP1_2_IRQn COMP1_2_3_IRQn
+#define COMP4_6_IRQn COMP4_5_6_IRQn
+#define TIM6_DAC1_IRQn TIM6_DAC_IRQn
+
+/* Aliases for __IRQHandler */
+#define ADC1_IRQHandler ADC1_2_IRQHandler
+#define CAN_TX_IRQHandler USB_HP_CAN_TX_IRQHandler
+#define CAN_RX0_IRQHandler USB_LP_CAN_RX0_IRQHandler
+#define TIM15_IRQHandler TIM1_BRK_TIM15_IRQHandler
+#define TIM16_IRQHandler TIM1_UP_TIM16_IRQHandler
+#define TIM17_IRQHandler TIM1_TRG_COM_TIM17_IRQHandler
+#define COMP_IRQHandler COMP1_2_3_IRQHandler
+#define COMP2_IRQHandler COMP1_2_3_IRQHandler
+#define COMP1_2_IRQHandler COMP1_2_3_IRQHandler
+#define COMP4_6_IRQHandler COMP4_5_6_IRQHandler
+#define TIM6_DAC1_IRQHandler TIM6_DAC_IRQHandler
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F303xE_H */
+
+/**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,238 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx.h
+ * @author MCD Application Team
+ * @version V2.1.0
+ * @date 12-Sept-2014
+ * @brief CMSIS STM32F3xx Device Peripheral Access Layer Header File.
+ *
+ * The file is the unique include file that the application programmer
+ * is using in the C source code, usually in main.c. This file contains:
+ * - Configuration section that allows to select:
+ * - The STM32F3xx device used in the target application
+ * - To use or not the peripherals drivers in application code(i.e.
+ * code will be based on direct access to peripherals registers
+ * rather than drivers API), this option is controlled by
+ * "#define USE_HAL_DRIVER"
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f3xx
+ * @{
+ */
+
+#ifndef __STM32F3xx_H
+#define __STM32F3xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+
+/** @addtogroup Library_configuration_section
+ * @{
+ */
+
+/* Uncomment the line below according to the target STM32 device used in your
+ application
+ */
+
+#if !defined (STM32F301x8) && !defined (STM32F302x8) && !defined (STM32F318xx) && \
+ !defined (STM32F302xC) && !defined (STM32F303xC) && !defined (STM32F358xx) && \
+ !defined (STM32F303x8) && !defined (STM32F334x8) && !defined (STM32F328xx) && \
+ !defined (STM32F302xE) && !defined (STM32F303xE) && !defined (STM32F398xx) && \
+ !defined (STM32F373xC) && !defined (STM32F378xx)
+
+ /* #define STM32F301x8 */ /*!< STM32F301K6, STM32F301K8, STM32F301C6, STM32F301C8,
+ STM32F301R6 and STM32F301R8 Devices */
+ /* #define STM32F302x8 */ /*!< STM32F302K6, STM32F302K8, STM32F302C6, STM32F302C8,
+ STM32F302R6 and STM32F302R8 Devices */
+ /* #define STM32F302xC */ /*!< STM32F302CB, STM32F302CC, STM32F302RB, STM32F302RC, STM32F302VB and STM32F302VC Devices */
+ /* #define STM32F302xE */ /*!< STM32F302CE, STM32F302RE, and STM32F302VE Devices */
+ /* #define STM32F303x8 */ /*!< STM32F303K6, STM32F303K8, STM32F303C6, STM32F303C8,
+ STM32F303R6 and STM32F303R8 Devices */
+ /* #define STM32F303xC */ /*!< STM32F303CB, STM32F303CC, STM32F303RB, STM32F303RC, STM32F303VB and STM32F303VC Devices */
+#define STM32F303xE /*!< STM32F303RE, STM32F303VE and STM32F303ZE Devices */
+ /* #define STM32F373xC */ /*!< STM32F373C8, STM32F373CB, STM32F373CC, STM32F373R8, STM32F373RB, STM32F373RC,
+ STM32F373V8, STM32F373VB and STM32F373VC Devices */
+ /* #define STM32F334x8 */ /*!< STM32F334C4, STM32F334C6, STM32F334C8, STM32F334R4, STM32F334R6 and STM32F334R8 Devices */
+ /* #define STM32F318xx */ /*!< STM32F318K8, STM32F318C8: STM32F301x8 with regulator off: STM32F318xx Devices */
+ /* #define STM32F328xx */ /*!< STM32F328C8, STM32F328R8: STM32F334x8 with regulator off: STM32F328xx Devices */
+ /* #define STM32F358xx */ /*!< STM32F358CC, STM32F358RC, STM32F358VC: STM32F303xC with regulator off: STM32F358xx Devices */
+ /* #define STM32F378xx */ /*!< STM32F378CC, STM32F378RC, STM32F378VC: STM32F373xC with regulator off: STM32F378xx Devices */
+ /* #define STM32F398xx */ /*!< STM32F398CE, STM32F398RE, STM32F398VE: STM32F303xE with regulator off: STM32F398xx Devices */
+#endif
+
+/* Tip: To avoid modifying this file each time you need to switch between these
+ devices, you can define the device in your toolchain compiler preprocessor.
+ */
+#if !defined (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
+ */
+#define USE_HAL_DRIVER
+#endif /* USE_HAL_DRIVER */
+
+/**
+ * @brief CMSIS Device version number V2.1.0
+ */
+#define __STM32F3xx_CMSIS_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */
+#define __STM32F3xx_CMSIS_DEVICE_VERSION_SUB1 (0x01) /*!< [23:16] sub1 version */
+#define __STM32F3xx_CMSIS_DEVICE_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
+#define __STM32F3xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32F3xx_CMSIS_DEVICE_VERSION ((__CMSIS_DEVICE_VERSION_MAIN << 24)\
+ |(__CMSIS_DEVICE_HAL_VERSION_SUB1 << 16)\
+ |(__CMSIS_DEVICE_HAL_VERSION_SUB2 << 8 )\
+ |(__CMSIS_DEVICE_HAL_VERSION_RC))
+
+/**
+ * @}
+ */
+
+/** @addtogroup Device_Included
+ * @{
+ */
+
+#if defined(STM32F301x8)
+ #include "stm32f301x8.h"
+#elif defined(STM32F302x8)
+ #include "stm32f302x8.h"
+#elif defined(STM32F302xC)
+ #include "stm32f302xc.h"
+#elif defined(STM32F302xE)
+ #include "stm32f302xe.h"
+#elif defined(STM32F303x8)
+ #include "stm32f303x8.h"
+#elif defined(STM32F303xC)
+ #include "stm32f303xc.h"
+#elif defined(STM32F303xE)
+ #include "stm32f303xe.h"
+#elif defined(STM32F373xC)
+ #include "stm32f373xc.h"
+#elif defined(STM32F334x8)
+ #include "stm32f334x8.h"
+#elif defined(STM32F318xx)
+ #include "stm32f318xx.h"
+#elif defined(STM32F328xx)
+ #include "stm32f328xx.h"
+#elif defined(STM32F358xx)
+ #include "stm32f358xx.h"
+#elif defined(STM32F378xx)
+ #include "stm32f378xx.h"
+#elif defined(STM32F398xx)
+ #include "stm32f398xx.h"
+#else
+ #error "Please select first the target STM32F3xx device used in your application (in stm32f3xx.h file)"
+#endif
+
+/**
+ * @}
+ */
+
+/** @addtogroup Exported_types
+ * @{
+ */
+typedef enum
+{
+ RESET = 0,
+ SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum
+{
+ DISABLE = 0,
+ ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum
+{
+ ERROR = 0,
+ SUCCESS = !ERROR
+} ErrorStatus;
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup Exported_macros
+ * @{
+ */
+#define SET_BIT(REG, BIT) ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT) ((REG) & (BIT))
+
+#define CLEAR_REG(REG) ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL) ((REG) = (VAL))
+
+#define READ_REG(REG) ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
+
+
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f3xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+
+/**
+ * @}
+ */
+
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F3xx_H */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,901 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief This file contains all the functions prototypes for the HAL
+ * module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_H
+#define __STM32F3xx_HAL_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_conf.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HAL
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup HAL_Exported_Constants HAL Exported Constants
+ * @{
+ */
+/** @defgroup SYSCFG_BitAddress_AliasRegion SYSCFG registers bit address in the alias region
+ * @brief SYSCFG registers bit address in the alias region
+ * @{
+ */
+/* ------------ SYSCFG registers bit address in the alias region -------------*/
+#define SYSCFG_OFFSET (SYSCFG_BASE - PERIPH_BASE)
+/* --- CFGR2 Register ---*/
+/* Alias word address of BYP_ADDR_PAR bit */
+#define CFGR2_OFFSET (SYSCFG_OFFSET + 0x18)
+#define BYPADDRPAR_BitNumber 0x04
+#define CFGR2_BYPADDRPAR_BB (PERIPH_BB_BASE + (CFGR2_OFFSET * 32) + (BYPADDRPAR_BitNumber * 4))
+/**
+ * @}
+ */
+
+#if defined(SYSCFG_CFGR1_DMA_RMP)
+/** @defgroup HAL_DMA_Remapping DMA Remapping
+ * Elements values convention: 0xXXYYYYYY
+ * - YYYYYY : Position in the register
+ * - XX : Register index
+ * - 00: CFGR1 register in SYSCFG
+ * - 01: CFGR3 register in SYSCFG (not available on STM32F373xC/STM32F378xx devices)
+ * @{
+ */
+#define HAL_REMAPDMA_ADC24_DMA2_CH34 ((uint32_t)0x00000100) /*!< ADC24 DMA remap (STM32F303xB/C/E, STM32F358xx and STM32F398xx devices)
+ 1: Remap (ADC24 DMA requests mapped on DMA2 channels 3 and 4) */
+#define HAL_REMAPDMA_TIM16_DMA1_CH6 ((uint32_t)0x00000800) /*!< TIM16 DMA request remap
+ 1: Remap (TIM16_CH1 and TIM16_UP DMA requests mapped on DMA1 channel 6) */
+#define HAL_REMAPDMA_TIM17_DMA1_CH7 ((uint32_t)0x00001000) /*!< TIM17 DMA request remap
+ 1: Remap (TIM17_CH1 and TIM17_UP DMA requests mapped on DMA1 channel 7) */
+#define HAL_REMAPDMA_TIM6_DAC1_CH1_DMA1_CH3 ((uint32_t)0x00002000) /*!< TIM6 and DAC channel1 DMA remap (STM32F303xB/C/E, STM32F358xx and STM32F398xx devices)
+ 1: Remap (TIM6_UP and DAC_CH1 DMA requests mapped on DMA1 channel 3) */
+#define HAL_REMAPDMA_TIM7_DAC1_CH2_DMA1_CH4 ((uint32_t)0x00004000) /*!< TIM7 and DAC channel2 DMA remap (STM32F303xB/C/E, STM32F358xx and STM32F398xx devices)
+ 1: Remap (TIM7_UP and DAC_CH2 DMA requests mapped on DMA1 channel 4) */
+#define HAL_REMAPDMA_DAC2_CH1_DMA1_CH5 ((uint32_t)0x00008000) /*!< DAC2 channel1 DMA remap (STM32F303x4/6/8 devices only)
+ 1: Remap (DAC2_CH1 DMA requests mapped on DMA1 channel 5) */
+#define HAL_REMAPDMA_TIM18_DAC2_CH1_DMA1_CH5 ((uint32_t)0x00008000) /*!< DAC2 channel1 DMA remap (STM32F303x4/6/8 devices only)
+ 1: Remap (DAC2_CH1 DMA requests mapped on DMA1 channel 5) */
+#if defined(SYSCFG_CFGR3_DMA_RMP)
+#if !defined(HAL_REMAP_CFGR3_MASK)
+#define HAL_REMAP_CFGR3_MASK ((uint32_t)0x01000000)
+#endif
+
+#define HAL_REMAPDMA_SPI1_RX_DMA1_CH2 ((uint32_t)0x01000003) /*!< SPI1_RX DMA remap (STM32F303x4/6/8 devices only)
+ 11: Map on DMA1 channel 2 */
+#define HAL_REMAPDMA_SPI1_RX_DMA1_CH4 ((uint32_t)0x01000001) /*!< SPI1_RX DMA remap (STM32F303x4/6/8 devices only)
+ 01: Map on DMA1 channel 4 */
+#define HAL_REMAPDMA_SPI1_RX_DMA1_CH6 ((uint32_t)0x01000002) /*!< SPI1_RX DMA remap (STM32F303x4/6/8 devices only)
+ 10: Map on DMA1 channel 6 */
+#define HAL_REMAPDMA_SPI1_TX_DMA1_CH3 ((uint32_t)0x0100000C) /*!< SPI1_TX DMA remap (STM32F303x4/6/8 devices only)
+ 11: Map on DMA1 channel 3 */
+#define HAL_REMAPDMA_SPI1_TX_DMA1_CH5 ((uint32_t)0x01000004) /*!< SPI1_TX DMA remap (STM32F303x4/6/8 devices only)
+ 01: Map on DMA1 channel 5 */
+#define HAL_REMAPDMA_SPI1_TX_DMA1_CH7 ((uint32_t)0x01000008) /*!< SPI1_TX DMA remap (STM32F303x4/6/8 devices only)
+ 10: Map on DMA1 channel 7 */
+#define HAL_REMAPDMA_I2C1_RX_DMA1_CH7 ((uint32_t)0x01000030) /*!< I2C1_RX DMA remap (STM32F303x4/6/8 devices only)
+ 11: Map on DMA1 channel 7 */
+#define HAL_REMAPDMA_I2C1_RX_DMA1_CH3 ((uint32_t)0x01000010) /*!< I2C1_RX DMA remap (STM32F303x4/6/8 devices only)
+ 01: Map on DMA1 channel 3 */
+#define HAL_REMAPDMA_I2C1_RX_DMA1_CH5 ((uint32_t)0x01000020) /*!< I2C1_RX DMA remap (STM32F303x4/6/8 devices only)
+ 10: Map on DMA1 channel 5 */
+#define HAL_REMAPDMA_I2C1_TX_DMA1_CH6 ((uint32_t)0x010000C0) /*!< I2C1_TX DMA remap (STM32F303x4/6/8 devices only)
+ 11: Map on DMA1 channel 6 */
+#define HAL_REMAPDMA_I2C1_TX_DMA1_CH2 ((uint32_t)0x01000040) /*!< I2C1_TX DMA remap (STM32F303x4/6/8 devices only)
+ 01: Map on DMA1 channel 2 */
+#define HAL_REMAPDMA_I2C1_TX_DMA1_CH4 ((uint32_t)0x01000080) /*!< I2C1_TX DMA remap (STM32F303x4/6/8 devices only)
+ 10: Map on DMA1 channel 4 */
+#define HAL_REMAPDMA_ADC2_DMA1_CH2 ((uint32_t)0x01000100) /*!< ADC2 DMA remap
+ x0: No remap (ADC2 on DMA2)
+ 10: Map on DMA1 channel 2 */
+#define HAL_REMAPDMA_ADC2_DMA1_CH4 ((uint32_t)0x01000300) /*!< ADC2 DMA remap
+ 11: Map on DMA1 channel 4 */
+#endif /* SYSCFG_CFGR3_DMA_RMP */
+
+#if defined(SYSCFG_CFGR3_DMA_RMP)
+#define IS_HAL_REMAPDMA(RMP) ((((RMP) & HAL_REMAPDMA_ADC24_DMA2_CH34) == HAL_REMAPDMA_ADC24_DMA2_CH34) || \
+ (((RMP) & HAL_REMAPDMA_TIM16_DMA1_CH6) == HAL_REMAPDMA_TIM16_DMA1_CH6) || \
+ (((RMP) & HAL_REMAPDMA_TIM17_DMA1_CH7) == HAL_REMAPDMA_TIM17_DMA1_CH7) || \
+ (((RMP) & HAL_REMAPDMA_TIM6_DAC1_CH1_DMA1_CH3) == HAL_REMAPDMA_TIM6_DAC1_CH1_DMA1_CH3) || \
+ (((RMP) & HAL_REMAPDMA_TIM7_DAC1_CH2_DMA1_CH4) == HAL_REMAPDMA_TIM7_DAC1_CH2_DMA1_CH4) || \
+ (((RMP) & HAL_REMAPDMA_DAC2_CH1_DMA1_CH5) == HAL_REMAPDMA_DAC2_CH1_DMA1_CH5) || \
+ (((RMP) & HAL_REMAPDMA_TIM18_DAC2_CH1_DMA1_CH5) == HAL_REMAPDMA_TIM18_DAC2_CH1_DMA1_CH5) || \
+ (((RMP) & HAL_REMAPDMA_SPI1_RX_DMA1_CH2) == HAL_REMAPDMA_SPI1_RX_DMA1_CH2) || \
+ (((RMP) & HAL_REMAPDMA_SPI1_RX_DMA1_CH4) == HAL_REMAPDMA_SPI1_RX_DMA1_CH4) || \
+ (((RMP) & HAL_REMAPDMA_SPI1_RX_DMA1_CH6) == HAL_REMAPDMA_SPI1_RX_DMA1_CH6) || \
+ (((RMP) & HAL_REMAPDMA_SPI1_TX_DMA1_CH3) == HAL_REMAPDMA_SPI1_TX_DMA1_CH3) || \
+ (((RMP) & HAL_REMAPDMA_SPI1_TX_DMA1_CH5) == HAL_REMAPDMA_SPI1_TX_DMA1_CH5) || \
+ (((RMP) & HAL_REMAPDMA_SPI1_TX_DMA1_CH7) == HAL_REMAPDMA_SPI1_TX_DMA1_CH7) || \
+ (((RMP) & HAL_REMAPDMA_I2C1_RX_DMA1_CH7) == HAL_REMAPDMA_I2C1_RX_DMA1_CH7) || \
+ (((RMP) & HAL_REMAPDMA_I2C1_RX_DMA1_CH3) == HAL_REMAPDMA_I2C1_RX_DMA1_CH3) || \
+ (((RMP) & HAL_REMAPDMA_I2C1_RX_DMA1_CH5) == HAL_REMAPDMA_I2C1_RX_DMA1_CH5) || \
+ (((RMP) & HAL_REMAPDMA_I2C1_TX_DMA1_CH6) == HAL_REMAPDMA_I2C1_TX_DMA1_CH6) || \
+ (((RMP) & HAL_REMAPDMA_I2C1_TX_DMA1_CH2) == HAL_REMAPDMA_I2C1_TX_DMA1_CH2) || \
+ (((RMP) & HAL_REMAPDMA_I2C1_TX_DMA1_CH4) == HAL_REMAPDMA_I2C1_TX_DMA1_CH4) || \
+ (((RMP) & HAL_REMAPDMA_ADC2_DMA1_CH2) == HAL_REMAPDMA_ADC2_DMA1_CH2) || \
+ (((RMP) & HAL_REMAPDMA_ADC2_DMA1_CH4) == HAL_REMAPDMA_ADC2_DMA1_CH4))
+#else
+#define IS_HAL_REMAPDMA(RMP) ((((RMP) & HAL_REMAPDMA_ADC24_DMA2_CH34) == HAL_REMAPDMA_ADC24_DMA2_CH34) || \
+ (((RMP) & HAL_REMAPDMA_TIM16_DMA1_CH6) == HAL_REMAPDMA_TIM16_DMA1_CH6) || \
+ (((RMP) & HAL_REMAPDMA_TIM17_DMA1_CH7) == HAL_REMAPDMA_TIM17_DMA1_CH7) || \
+ (((RMP) & HAL_REMAPDMA_TIM6_DAC1_CH1_DMA1_CH3) == HAL_REMAPDMA_TIM6_DAC1_CH1_DMA1_CH3) || \
+ (((RMP) & HAL_REMAPDMA_TIM7_DAC1_CH2_DMA1_CH4) == HAL_REMAPDMA_TIM7_DAC1_CH2_DMA1_CH4) || \
+ (((RMP) & HAL_REMAPDMA_DAC2_CH1_DMA1_CH5) == HAL_REMAPDMA_DAC2_CH1_DMA1_CH5) || \
+ (((RMP) & HAL_REMAPDMA_TIM18_DAC2_CH1_DMA1_CH5) == HAL_REMAPDMA_TIM18_DAC2_CH1_DMA1_CH5))
+#endif /* SYSCFG_CFGR3_DMA_RMP && SYSCFG_CFGR1_DMA_RMP*/
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR1_DMA_RMP */
+
+/** @defgroup HAL_Trigger_Remapping Trigger Remapping
+ * Elements values convention: 0xXXYYYYYY
+ * - YYYYYY : Position in the register
+ * - XX : Register index
+ * - 00: CFGR1 register in SYSCFG
+ * - 01: CFGR3 register in SYSCFG
+ * @{
+ */
+#define HAL_REMAPTRIGGER_DAC1_TRIG ((uint32_t)0x00000080) /*!< DAC trigger remap (when TSEL = 001 on STM32F303xB/C and STM32F358xx devices)
+ 0: No remap (DAC trigger is TIM8_TRGO)
+ 1: Remap (DAC trigger is TIM3_TRGO) */
+#define HAL_REMAPTRIGGER_TIM1_ITR3 ((uint32_t)0x00000040) /*!< TIM1 ITR3 trigger remap
+ 0: No remap
+ 1: Remap (TIM1_TRG3 = TIM17_OC) */
+#if defined(SYSCFG_CFGR3_TRIGGER_RMP)
+#if !defined(HAL_REMAP_CFGR3_MASK)
+#define HAL_REMAP_CFGR3_MASK ((uint32_t)0x01000000)
+#endif
+#define HAL_REMAPTRIGGER_DAC1_TRIG3 ((uint32_t)0x01010000) /*!< DAC1_CH1 / DAC1_CH2 Trigger remap
+ 0: Remap (DAC trigger is TIM15_TRGO)
+ 1: Remap (DAC trigger is HRTIM1_DAC1_TRIG1) */
+#define HAL_REMAPTRIGGER_DAC1_TRIG5 ((uint32_t)0x01020000) /*!< DAC1_CH1 / DAC1_CH2 Trigger remap
+ 0: No remap
+ 1: Remap (DAC trigger is HRTIM1_DAC1_TRIG2) */
+#define IS_HAL_REMAPTRIGGER(RMP) ((((RMP) & HAL_REMAPTRIGGER_DAC1) == HAL_REMAPTRIGGER_DAC1) || \
+ (((RMP) & HAL_REMAPTRIGGER_TIM1_ITR3) == HAL_REMAPTRIGGER_TIM1_ITR3) || \
+ (((RMP) & HAL_REMAPTRIGGER_DAC1_TRIG3) == HAL_REMAPTRIGGER_DAC1_TRIG3) || \
+ (((RMP) & HAL_REMAPTRIGGER_DAC1_TRIG5) == HAL_REMAPTRIGGER_DAC1_TRIG5))
+#else
+#define IS_HAL_REMAPTRIGGER(RMP) ((((RMP) & HAL_REMAPTRIGGER_DAC1) == HAL_REMAPTRIGGER_DAC1) || \
+ (((RMP) & HAL_REMAPTRIGGER_TIM1_ITR3) == HAL_REMAPTRIGGER_TIM1_ITR3))
+#endif /* SYSCFG_CFGR3_TRIGGER_RMP */
+/**
+ * @}
+ */
+
+#if defined (STM32F303xE) || defined (STM32F398xx)
+/** @defgroup HAL_ADC_Trigger_Remapping ADC Trigger Remapping
+ * @{
+ */
+#define HAL_REMAPADCTRIGGER_ADC12_EXT2 SYSCFG_CFGR4_ADC12_EXT2_RMP /*!< Input trigger of ADC12 regular channel EXT2
+ 0: No remap (TIM1_CC3)
+ 1: Remap (TIM20_TRGO) */
+#define HAL_REMAPADCTRIGGER_ADC12_EXT3 SYSCFG_CFGR4_ADC12_EXT3_RMP /*!< Input trigger of ADC12 regular channel EXT3
+ 0: No remap (TIM2_CC2)
+ 1: Remap (TIM20_TRGO2) */
+#define HAL_REMAPADCTRIGGER_ADC12_EXT5 SYSCFG_CFGR4_ADC12_EXT5_RMP /*!< Input trigger of ADC12 regular channel EXT5
+ 0: No remap (TIM4_CC4)
+ 1: Remap (TIM20_CC1) */
+#define HAL_REMAPADCTRIGGER_ADC12_EXT13 SYSCFG_CFGR4_ADC12_EXT13_RMP /*!< Input trigger of ADC12 regular channel EXT13
+ 0: No remap (TIM6_TRGO)
+ 1: Remap (TIM20_CC2) */
+#define HAL_REMAPADCTRIGGER_ADC12_EXT15 SYSCFG_CFGR4_ADC12_EXT15_RMP /*!< Input trigger of ADC12 regular channel EXT15
+ 0: No remap (TIM3_CC4)
+ 1: Remap (TIM20_CC3) */
+#define HAL_REMAPADCTRIGGER_ADC12_JEXT3 SYSCFG_CFGR4_ADC12_JEXT3_RMP /*!< Input trigger of ADC12 injected channel JEXT3
+ 0: No remap (TIM2_CC1)
+ 1: Remap (TIM20_TRGO) */
+#define HAL_REMAPADCTRIGGER_ADC12_JEXT6 SYSCFG_CFGR4_ADC12_JEXT6_RMP /*!< Input trigger of ADC12 injected channel JEXT6
+ 0: No remap (EXTI line 15)
+ 1: Remap (TIM20_TRGO2) */
+#define HAL_REMAPADCTRIGGER_ADC12_JEXT13 SYSCFG_CFGR4_ADC12_JEXT13_RMP /*!< Input trigger of ADC12 injected channel JEXT13
+ 0: No remap (TIM3_CC1)
+ 1: Remap (TIM20_CC4) */
+#define HAL_REMAPADCTRIGGER_ADC34_EXT5 SYSCFG_CFGR4_ADC34_EXT5_RMP /*!< Input trigger of ADC34 regular channel EXT5
+ 0: No remap (EXTI line 2)
+ 1: Remap (TIM20_TRGO) */
+#define HAL_REMAPADCTRIGGER_ADC34_EXT6 SYSCFG_CFGR4_ADC34_EXT6_RMP /*!< Input trigger of ADC34 regular channel EXT6
+ 0: No remap (TIM4_CC1)
+ 1: Remap (TIM20_TRGO2) */
+#define HAL_REMAPADCTRIGGER_ADC34_EXT15 SYSCFG_CFGR4_ADC34_EXT15_RMP /*!< Input trigger of ADC34 regular channel EXT15
+ 0: No remap (TIM2_CC1)
+ 1: Remap (TIM20_CC1) */
+#define HAL_REMAPADCTRIGGER_ADC34_JEXT5 SYSCFG_CFGR4_ADC34_JEXT5_RMP /*!< Input trigger of ADC34 injected channel JEXT5
+ 0: No remap (TIM4_CC3)
+ 1: Remap (TIM20_TRGO) */
+#define HAL_REMAPADCTRIGGER_ADC34_JEXT11 SYSCFG_CFGR4_ADC34_JEXT11_RMP /*!< Input trigger of ADC34 injected channel JEXT11
+ 0: No remap (TIM1_CC3)
+ 1: Remap (TIM20_TRGO2) */
+#define HAL_REMAPADCTRIGGER_ADC34_JEXT14 SYSCFG_CFGR4_ADC34_JEXT14_RMP /*!< Input trigger of ADC34 injected channel JEXT14
+ 0: No remap (TIM7_TRGO)
+ 1: Remap (TIM20_CC2) */
+
+#define IS_HAL_REMAPADCTRIGGER(RMP) ((((RMP) & HAL_REMAPADCTRIGGER_ADC12_EXT2) == HAL_REMAPADCTRIGGER_ADC12_EXT2) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_EXT3) == HAL_REMAPADCTRIGGER_ADC12_EXT3) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_EXT5) == HAL_REMAPADCTRIGGER_ADC12_EXT5) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_EXT13) == HAL_REMAPADCTRIGGER_ADC12_EXT13) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_EXT15) == HAL_REMAPADCTRIGGER_ADC12_EXT15) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_JEXT3) == HAL_REMAPADCTRIGGER_ADC12_JEXT3) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_JEXT6) == HAL_REMAPADCTRIGGER_ADC12_JEXT6) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC12_JEXT13) == HAL_REMAPADCTRIGGER_ADC12_JEXT13) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC34_EXT5) == HAL_REMAPADCTRIGGER_ADC34_EXT5) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC34_EXT6) == HAL_REMAPADCTRIGGER_ADC34_EXT6) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC34_EXT15) == HAL_REMAPADCTRIGGER_ADC34_EXT15) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC34_JEXT5) == HAL_REMAPADCTRIGGER_ADC34_JEXT5) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC34_JEXT11) == HAL_REMAPADCTRIGGER_ADC34_JEXT11) || \
+ (((RMP) & HAL_REMAPADCTRIGGER_ADC34_JEXT14) == HAL_REMAPADCTRIGGER_ADC34_JEXT14))
+/**
+ * @}
+ */
+#endif /* STM32F303xE || STM32F398xx */
+
+/** @defgroup HAL_FastModePlus_I2C I2C Fast Mode Plus
+ * @{
+ */
+#if defined(SYSCFG_CFGR1_I2C1_FMP)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C1 ((uint32_t)SYSCFG_CFGR1_I2C1_FMP) /*!< I2C1 fast mode Plus driving capability activation
+ 0: FM+ mode is not enabled on I2C1 pins selected through AF selection bits
+ 1: FM+ mode is enabled on I2C1 pins selected through AF selection bits */
+#endif /* SYSCFG_CFGR1_I2C1_FMP */
+
+#if defined(SYSCFG_CFGR1_I2C2_FMP)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C2 ((uint32_t)SYSCFG_CFGR1_I2C2_FMP) /*!< I2C2 fast mode Plus driving capability activation
+ 0: FM+ mode is not enabled on I2C2 pins selected through AF selection bits
+ 1: FM+ mode is enabled on I2C2 pins selected through AF selection bits */
+#endif /* SYSCFG_CFGR1_I2C2_FMP */
+
+#if defined(SYSCFG_CFGR1_I2C3_FMP)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C3 ((uint32_t)SYSCFG_CFGR1_I2C3_FMP) /*!< I2C3 fast mode Plus driving capability activation
+ 0: FM+ mode is not enabled on I2C3 pins selected through AF selection bits
+ 1: FM+ mode is enabled on I2C3 pins selected through AF selection bits */
+#endif /* SYSCFG_CFGR1_I2C3_FMP */
+
+#if defined(SYSCFG_CFGR1_I2C_PB6_FMP)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB6 ((uint32_t)SYSCFG_CFGR1_I2C_PB6_FMP) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
+ 0: PB6 pin operates in standard mode
+ 1: I2C FM+ mode enabled on PB6 pin, and the Speed control is bypassed */
+#endif /* SYSCFG_CFGR1_I2C_PB6_FMP */
+
+#if defined(SYSCFG_CFGR1_I2C_PB7_FMP)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB7 ((uint32_t)SYSCFG_CFGR1_I2C_PB7_FMP) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
+ 0: PB7 pin operates in standard mode
+ 1: I2C FM+ mode enabled on PB7 pin, and the Speed control is bypassed */
+#endif /* SYSCFG_CFGR1_I2C_PB7_FMP */
+
+#if defined(SYSCFG_CFGR1_I2C_PB8_FMP)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB8 ((uint32_t)SYSCFG_CFGR1_I2C_PB8_FMP) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
+ 0: PB8 pin operates in standard mode
+ 1: I2C FM+ mode enabled on PB8 pin, and the Speed control is bypassed */
+#endif /* SYSCFG_CFGR1_I2C_PB8_FMP */
+
+#if defined(SYSCFG_CFGR1_I2C_PB9_FMP)
+#define HAL_SYSCFG_FASTMODEPLUS_I2C_PB9 ((uint32_t)SYSCFG_CFGR1_I2C_PB9_FMP) /*!< Fast Mode Plus (FM+) driving capability activation on the pad
+ 0: PB9 pin operates in standard mode
+ 1: I2C FM+ mode enabled on PB9 pin, and the Speed control is bypassed */
+#endif /* SYSCFG_CFGR1_I2C_PB9_FMP */
+
+#if defined(SYSCFG_CFGR1_I2C1_FMP) && defined(SYSCFG_CFGR1_I2C2_FMP) && defined(SYSCFG_CFGR1_I2C3_FMP)
+#define IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG(CONFIG) ((((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C1) == HAL_SYSCFG_FASTMODEPLUS_I2C1) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C2) == HAL_SYSCFG_FASTMODEPLUS_I2C2) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C3) == HAL_SYSCFG_FASTMODEPLUS_I2C3) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C_PB9) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB9))
+#elif defined(SYSCFG_CFGR1_I2C1_FMP) && defined(SYSCFG_CFGR1_I2C2_FMP)
+#define IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG(CONFIG) ((((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C1) == HAL_SYSCFG_FASTMODEPLUS_I2C1) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C2) == HAL_SYSCFG_FASTMODEPLUS_I2C2) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C_PB9) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB9))
+#elif defined(SYSCFG_CFGR1_I2C1_FMP)
+#define IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG(CONFIG) ((((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C1) == HAL_SYSCFG_FASTMODEPLUS_I2C1) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB6) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB7) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB8) || \
+ (((CONFIG) & HAL_SYSCFG_FASTMODEPLUS_I2C_PB9) == HAL_SYSCFG_FASTMODEPLUS_I2C_PB9))
+#endif /* SYSCFG_CFGR1_I2C1_FMP && SYSCFG_CFGR1_I2C2_FMP && SYSCFG_CFGR3_I2C1_FMP */
+/**
+ * @}
+ */
+
+#if defined(SYSCFG_RCR_PAGE0)
+/* CCM-SRAM defined */
+/** @defgroup HAL_Page_Write_Protection CCM RAM page write protection
+ * @{
+ */
+#define HAL_SYSCFG_WP_PAGE0 (SYSCFG_RCR_PAGE0) /*!< ICODE SRAM Write protection page 0 */
+#define HAL_SYSCFG_WP_PAGE1 (SYSCFG_RCR_PAGE1) /*!< ICODE SRAM Write protection page 1 */
+#define HAL_SYSCFG_WP_PAGE2 (SYSCFG_RCR_PAGE2) /*!< ICODE SRAM Write protection page 2 */
+#define HAL_SYSCFG_WP_PAGE3 (SYSCFG_RCR_PAGE3) /*!< ICODE SRAM Write protection page 3 */
+#if defined(SYSCFG_RCR_PAGE4)
+/* More than 4KB CCM-SRAM defined */
+#define HAL_SYSCFG_WP_PAGE4 (SYSCFG_RCR_PAGE4) /*!< ICODE SRAM Write protection page 4 */
+#define HAL_SYSCFG_WP_PAGE5 (SYSCFG_RCR_PAGE5) /*!< ICODE SRAM Write protection page 5 */
+#define HAL_SYSCFG_WP_PAGE6 (SYSCFG_RCR_PAGE6) /*!< ICODE SRAM Write protection page 6 */
+#define HAL_SYSCFG_WP_PAGE7 (SYSCFG_RCR_PAGE7) /*!< ICODE SRAM Write protection page 7 */
+#endif /* SYSCFG_RCR_PAGE4 */
+#if defined(SYSCFG_RCR_PAGE8)
+#define HAL_SYSCFG_WP_PAGE8 (SYSCFG_RCR_PAGE8) /*!< ICODE SRAM Write protection page 8 */
+#define HAL_SYSCFG_WP_PAGE9 (SYSCFG_RCR_PAGE9) /*!< ICODE SRAM Write protection page 9 */
+#define HAL_SYSCFG_WP_PAGE10 (SYSCFG_RCR_PAGE10) /*!< ICODE SRAM Write protection page 10 */
+#define HAL_SYSCFG_WP_PAGE11 (SYSCFG_RCR_PAGE11) /*!< ICODE SRAM Write protection page 11 */
+#define HAL_SYSCFG_WP_PAGE12 (SYSCFG_RCR_PAGE12) /*!< ICODE SRAM Write protection page 12 */
+#define HAL_SYSCFG_WP_PAGE13 (SYSCFG_RCR_PAGE13) /*!< ICODE SRAM Write protection page 13 */
+#define HAL_SYSCFG_WP_PAGE14 (SYSCFG_RCR_PAGE14) /*!< ICODE SRAM Write protection page 14 */
+#define HAL_SYSCFG_WP_PAGE15 (SYSCFG_RCR_PAGE15) /*!< ICODE SRAM Write protection page 15 */
+#endif /* SYSCFG_RCR_PAGE8 */
+
+#if defined(SYSCFG_RCR_PAGE8)
+#define IS_HAL_SYSCFG_WP_PAGE(__PAGE__) (((__PAGE__) > 0) && ((__PAGE__) <= (uint32_t)0xFFFF))
+#elif defined(SYSCFG_RCR_PAGE4)
+#define IS_HAL_SYSCFG_WP_PAGE(__PAGE__) (((__PAGE__) > 0) && ((__PAGE__) <= (uint32_t)0x00FF))
+#else
+#define IS_HAL_SYSCFG_WP_PAGE(__PAGE__) (((__PAGE__) > 0) && ((__PAGE__) <= (uint32_t)0x000F))
+#endif /* SYSCFG_RCR_PAGE8 */
+/**
+ * @}
+ */
+#endif /* SYSCFG_RCR_PAGE0 */
+
+/** @defgroup HAL_SYSCFG_Interrupts SYSCFG Interrupts
+ * @{
+ */
+#define HAL_SYSCFG_IT_FPU_IOC (SYSCFG_CFGR1_FPU_IE_0) /*!< Floating Point Unit Invalid operation Interrupt */
+#define HAL_SYSCFG_IT_FPU_DZC (SYSCFG_CFGR1_FPU_IE_1) /*!< Floating Point Unit Divide-by-zero Interrupt */
+#define HAL_SYSCFG_IT_FPU_UFC (SYSCFG_CFGR1_FPU_IE_2) /*!< Floating Point Unit Underflow Interrupt */
+#define HAL_SYSCFG_IT_FPU_OFC (SYSCFG_CFGR1_FPU_IE_3) /*!< Floating Point Unit Overflow Interrupt */
+#define HAL_SYSCFG_IT_FPU_IDC (SYSCFG_CFGR1_FPU_IE_4) /*!< Floating Point Unit Input denormal Interrupt */
+#define HAL_SYSCFG_IT_FPU_IXC (SYSCFG_CFGR1_FPU_IE_5) /*!< Floating Point Unit Inexact Interrupt */
+
+#define IS_HAL_SYSCFG_INTERRUPT(__INTERRUPT__) ((((__INTERRUPT__) & SYSCFG_CFGR1_FPU_IE_0) == SYSCFG_CFGR1_FPU_IE_0) || \
+ (((__INTERRUPT__) & SYSCFG_CFGR1_FPU_IE_1) == SYSCFG_CFGR1_FPU_IE_1) || \
+ (((__INTERRUPT__) & SYSCFG_CFGR1_FPU_IE_2) == SYSCFG_CFGR1_FPU_IE_2) || \
+ (((__INTERRUPT__) & SYSCFG_CFGR1_FPU_IE_3) == SYSCFG_CFGR1_FPU_IE_3) || \
+ (((__INTERRUPT__) & SYSCFG_CFGR1_FPU_IE_4) == SYSCFG_CFGR1_FPU_IE_4) || \
+ (((__INTERRUPT__) & SYSCFG_CFGR1_FPU_IE_5) == SYSCFG_CFGR1_FPU_IE_5))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup HAL_Exported_Macros HAL Exported Macros
+ * @{
+ */
+
+/** @defgroup Debug_MCU_APB1_Freeze Freeze/Unfreeze APB1 Peripherals in Debug mode
+ * @{
+ */
+#if defined(DBGMCU_APB1_FZ_DBG_TIM2_STOP)
+#define __HAL_FREEZE_TIM2_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_UNFREEZE_TIM2_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM2_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM3_STOP)
+#define __HAL_FREEZE_TIM3_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#define __HAL_UNFREEZE_TIM3_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM3_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM4_STOP)
+#define __HAL_FREEZE_TIM4_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM4_STOP))
+#define __HAL_UNFREEZE_TIM4_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM4_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM4_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM5_STOP)
+#define __HAL_FREEZE_TIM5_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM5_STOP))
+#define __HAL_UNFREEZE_TIM5_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM5_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM5_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM6_STOP)
+#define __HAL_FREEZE_TIM6_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_UNFREEZE_TIM6_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM6_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM7_STOP)
+#define __HAL_FREEZE_TIM7_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#define __HAL_UNFREEZE_TIM7_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM7_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM12_STOP)
+#define __HAL_FREEZE_TIM12_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM12_STOP))
+#define __HAL_UNFREEZE_TIM12_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM12_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM12_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM13_STOP)
+#define __HAL_FREEZE_TIM13_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM13_STOP))
+#define __HAL_UNFREEZE_TIM13_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM13_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM13_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM14_STOP)
+#define __HAL_FREEZE_TIM14_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#define __HAL_UNFREEZE_TIM14_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM14_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_TIM18_STOP)
+#define __HAL_FREEZE_TIM18_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM18_STOP))
+#define __HAL_UNFREEZE_TIM18_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM18_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_TIM14_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_RTC_STOP)
+#define __HAL_FREEZE_RTC_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_UNFREEZE_RTC_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_RTC_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_WWDG_STOP)
+#define __HAL_FREEZE_WWDG_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_UNFREEZE_WWDG_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_WWDG_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_IWDG_STOP)
+#define __HAL_FREEZE_IWDG_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_UNFREEZE_IWDG_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_IWDG_STOP */
+
+#if defined(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)
+#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT))
+#endif /* DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT */
+
+#if defined(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT)
+#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
+#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT))
+#endif /* DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT */
+
+#if defined(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT)
+#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
+#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT))
+#endif /* DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT */
+
+#if defined(DBGMCU_APB1_FZ_DBG_CAN_STOP)
+#define __HAL_FREEZE_CAN_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN_STOP))
+#define __HAL_UNFREEZE_CAN_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN_STOP))
+#endif /* DBGMCU_APB1_FZ_DBG_CAN_STOP */
+/**
+ * @}
+ */
+
+/** @defgroup Debug_MCU_APB2_Freeze Freeze/Unfreeze APB2 Peripherals in Debug mode
+ * @{
+ */
+#if defined(DBGMCU_APB2_FZ_DBG_TIM1_STOP)
+#define __HAL_FREEZE_TIM1_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#define __HAL_UNFREEZE_TIM1_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM1_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM8_STOP)
+#define __HAL_FREEZE_TIM8_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM8_STOP))
+#define __HAL_UNFREEZE_TIM8_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM8_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM8_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM15_STOP)
+#define __HAL_FREEZE_TIM15_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM15_STOP))
+#define __HAL_UNFREEZE_TIM15_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM15_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM15_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM16_STOP)
+#define __HAL_FREEZE_TIM16_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM16_STOP))
+#define __HAL_UNFREEZE_TIM16_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM16_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM16_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM17_STOP)
+#define __HAL_FREEZE_TIM17_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM17_STOP))
+#define __HAL_UNFREEZE_TIM17_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM17_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM17_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM19_STOP)
+#define __HAL_FREEZE_TIM19_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM19_STOP))
+#define __HAL_UNFREEZE_TIM19_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM19_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM19_STOP */
+
+#if defined(DBGMCU_APB2_FZ_DBG_TIM20_STOP)
+#define __HAL_FREEZE_TIM20_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM19_STOP))
+#define __HAL_UNFREEZE_TIM20_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM19_STOP))
+#endif /* DBGMCU_APB2_FZ_DBG_TIM20_STOP */
+/**
+ * @}
+ */
+
+/** @defgroup Memory_Mapping_Selection Memory Mapping Selection
+ * @{
+ */
+#if defined(SYSCFG_CFGR1_MEM_MODE)
+/** @brief Main Flash memory mapped at 0x00000000
+ */
+#define __HAL_REMAPMEMORY_FLASH() (SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE))
+#endif /* SYSCFG_CFGR1_MEM_MODE */
+
+#if defined(SYSCFG_CFGR1_MEM_MODE_0)
+/** @brief System Flash memory mapped at 0x00000000
+ */
+#define __HAL_REMAPMEMORY_SYSTEMFLASH() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE); \
+ SYSCFG->CFGR1 |= SYSCFG_CFGR1_MEM_MODE_0; \
+ }while(0)
+#endif /* SYSCFG_CFGR1_MEM_MODE_0 */
+
+#if defined(SYSCFG_CFGR1_MEM_MODE_0) && defined(SYSCFG_CFGR1_MEM_MODE_1)
+/** @brief Embedded SRAM mapped at 0x00000000
+ */
+#define __HAL_REMAPMEMORY_SRAM() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE); \
+ SYSCFG->CFGR1 |= (SYSCFG_CFGR1_MEM_MODE_0 | SYSCFG_CFGR1_MEM_MODE_1); \
+ }while(0)
+#endif /* SYSCFG_CFGR1_MEM_MODE_0 && SYSCFG_CFGR1_MEM_MODE_1 */
+
+#if defined(SYSCFG_CFGR1_MEM_MODE_2)
+#define __HAL_FMC_BANK() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE); \
+ SYSCFG->CFGR1 |= (SYSCFG_CFGR1_MEM_MODE_2); \
+ }while(0)
+#endif /* SYSCFG_CFGR1_MEM_MODE_2 */
+/**
+ * @}
+ */
+
+/** @defgroup Encoder_Mode Encoder Mode
+ * @{
+ */
+#if defined(SYSCFG_CFGR1_ENCODER_MODE)
+/** @brief No Encoder mode
+ */
+#define __HAL_REMAPENCODER_NONE() (SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_ENCODER_MODE))
+#endif /* SYSCFG_CFGR1_ENCODER_MODE */
+
+#if defined(SYSCFG_CFGR1_ENCODER_MODE_0)
+/** @brief Encoder mode : TIM2 IC1 and TIM2 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively
+ */
+#define __HAL_REMAPENCODER_TIM2() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_ENCODER_MODE); \
+ SYSCFG->CFGR1 |= SYSCFG_CFGR1_ENCODER_MODE_0; \
+ }while(0)
+#endif /* SYSCFG_CFGR1_ENCODER_MODE_0 */
+
+#if defined(SYSCFG_CFGR1_ENCODER_MODE_1)
+/** @brief Encoder mode : TIM3 IC1 and TIM3 IC2 are connected to TIM15 IC1 and TIM15 IC2 respectively
+ */
+#define __HAL_REMAPENCODER_TIM3() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_ENCODER_MODE); \
+ SYSCFG->CFGR1 |= SYSCFG_CFGR1_ENCODER_MODE_1; \
+ }while(0)
+#endif /* SYSCFG_CFGR1_ENCODER_MODE_1 */
+
+#if defined(SYSCFG_CFGR1_ENCODER_MODE_0) && defined(SYSCFG_CFGR1_ENCODER_MODE_1)
+/** @brief Encoder mode : TIM4 IC1 and TIM4 IC2 are connected to TIM15 IC1 and TIM15 IC2 (STM32F303xB/C and STM32F358xx devices)
+ */
+#define __HAL_REMAPENCODER_TIM4() do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_ENCODER_MODE); \
+ SYSCFG->CFGR1 |= (SYSCFG_CFGR1_ENCODER_MODE_0 | SYSCFG_CFGR1_ENCODER_MODE_1); \
+ }while(0)
+#endif /* SYSCFG_CFGR1_ENCODER_MODE_0 && SYSCFG_CFGR1_ENCODER_MODE_1 */
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Remap_Enable DMA Remap Enable
+ * @{
+ */
+#if defined(SYSCFG_CFGR3_DMA_RMP) && defined(SYSCFG_CFGR1_DMA_RMP)
+/** @brief DMA remapping enable/disable macros
+ * @param __DMA_REMAP__: This parameter can be a value of @ref HAL_DMA_Remapping
+ */
+#define __HAL_REMAPDMA_CHANNEL_ENABLE(__DMA_REMAP__) do {assert_param(IS_HAL_REMAPDMA((__DMA_REMAP__))); \
+ (((__DMA_REMAP__) & HAL_REMAP_CFGR3_MASK) ? \
+ (SYSCFG->CFGR3 |= ((__DMA_REMAP__) & ~HAL_REMAP_CFGR3_MASK)) : \
+ (SYSCFG->CFGR1 |= (__DMA_REMAP__))); \
+ }while(0)
+#define __HAL_REMAPDMA_CHANNEL_DISABLE(__DMA_REMAP__) do {assert_param(IS_HAL_REMAPDMA((__DMA_REMAP__))); \
+ (((__DMA_REMAP__) & HAL_REMAP_CFGR3_MASK) ? \
+ (SYSCFG->CFGR3 &= (~(__DMA_REMAP__) | HAL_REMAP_CFGR3_MASK)) : \
+ (SYSCFG->CFGR1 &= ~(__DMA_REMAP__))); \
+ }while(0)
+#elif defined(SYSCFG_CFGR1_DMA_RMP)
+/** @brief DMA remapping enable/disable macros
+ * @param __DMA_REMAP__: This parameter can be a value of @ref HAL_DMA_Remapping
+ */
+#define __HAL_REMAPDMA_CHANNEL_ENABLE(__DMA_REMAP__) do {assert_param(IS_HAL_REMAPDMA((__DMA_REMAP__))); \
+ SYSCFG->CFGR1 |= (__DMA_REMAP__); \
+ }while(0)
+#define __HAL_REMAPDMA_CHANNEL_DISABLE(__DMA_REMAP__) do {assert_param(IS_HAL_REMAPDMA((__DMA_REMAP__))); \
+ SYSCFG->CFGR1 &= ~(__DMA_REMAP__); \
+ }while(0)
+#endif /* SYSCFG_CFGR3_DMA_RMP || SYSCFG_CFGR1_DMA_RMP */
+/**
+ * @}
+ */
+
+/** @defgroup I2C2_Fast_Mode_Plus_Enable I2C2 Fast Mode Plus Enable
+ * @{
+ */
+/** @brief Fast mode Plus driving capability enable/disable macros
+ * @param __FASTMODEPLUS__: This parameter can be a value of @ref HAL_FastModePlus_I2C
+ */
+#define __HAL_SYSCFG_FASTMODEPLUS_ENABLE(__FASTMODEPLUS__) do {assert_param(IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG((__FASTMODEPLUS__))); \
+ SYSCFG->CFGR1 |= (__FASTMODEPLUS__); \
+ }while(0)
+
+#define __HAL_SYSCFG_FASTMODEPLUS_DISABLE(__FASTMODEPLUS__) do {assert_param(IS_HAL_SYSCFG_FASTMODEPLUS_CONFIG((__FASTMODEPLUS__))); \
+ SYSCFG->CFGR1 &= ~(__FASTMODEPLUS__); \
+ }while(0)
+/**
+ * @}
+ */
+
+/** @defgroup Floating_Point_Unit_Interrupts_Enable Floating Point Unit Interrupts Enable
+ * @{
+ */
+/** @brief SYSCFG interrupt enable/disable macros
+ * @param __INTERRUPT__: This parameter can be a value of @ref HAL_SYSCFG_Interrupts
+ */
+#define __HAL_SYSCFG_INTERRUPT_ENABLE(__INTERRUPT__) do {assert_param(IS_HAL_SYSCFG_INTERRUPT((__INTERRUPT__))); \
+ SYSCFG->CFGR1 |= (__INTERRUPT__); \
+ }while(0)
+
+#define __HAL_SYSCFG_INTERRUPT_DISABLE(__INTERRUPT__) do {assert_param(IS_HAL_SYSCFG_INTERRUPT((__INTERRUPT__))); \
+ SYSCFG->CFGR1 &= ~(__INTERRUPT__); \
+ }while(0)
+/**
+ * @}
+ */
+
+#if defined(SYSCFG_CFGR1_USB_IT_RMP)
+/** @defgroup USB_Interrupt_Remap USB Interrupt Remap
+ * @{
+ */
+/** @brief USB interrupt remapping enable/disable macros
+ */
+#define __HAL_REMAPINTERRUPT_USB_ENABLE() (SYSCFG->CFGR1 |= (SYSCFG_CFGR1_USB_IT_RMP))
+#define __HAL_REMAPINTERRUPT_USB_DISABLE() (SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_USB_IT_RMP))
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR1_USB_IT_RMP */
+
+#if defined(SYSCFG_CFGR1_VBAT)
+/** @defgroup VBAT_Monitoring_Enable VBAT Monitoring Enable
+ * @{
+ */
+/** @brief SYSCFG interrupt enable/disable macros
+ */
+#define __HAL_SYSCFG_VBAT_MONITORING_ENABLE() (SYSCFG->CFGR1 |= (SYSCFG_CFGR1_VBAT))
+#define __HAL_SYSCFG_VBAT_MONITORING_DISABLE() (SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_VBAT))
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR1_VBAT */
+
+#if defined(SYSCFG_CFGR2_LOCKUP_LOCK)
+/** @defgroup Cortex_Lockup_Enable Cortex Lockup Enable
+ * @{
+ */
+/** @brief SYSCFG Break Lockup lock
+ * Enables and locks the connection of Cortex-M4 LOCKUP (Hardfault) output to TIM1/15/16/17 Break input
+ * @note The selected configuration is locked and can be unlocked by system reset
+ */
+#define __HAL_SYSCFG_BREAK_LOCKUP_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_LOCKUP_LOCK); \
+ SYSCFG->CFGR2 |= SYSCFG_CFGR2_LOCKUP_LOCK; \
+ }while(0)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR2_LOCKUP_LOCK */
+
+#if defined(SYSCFG_CFGR2_PVD_LOCK)
+/** @defgroup PVD_Lock_Enable PVD Lock
+ * @{
+ */
+/** @brief SYSCFG Break PVD lock
+ * Enables and locks the PVD connection with Timer1/8/15/16/17 Break Input, , as well as the PVDE and PLS[2:0] in the PWR_CR register
+ * @note The selected configuration is locked and can be unlocked by system reset
+ */
+#define __HAL_SYSCFG_BREAK_PVD_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_PVD_LOCK); \
+ SYSCFG->CFGR2 |= SYSCFG_CFGR2_PVD_LOCK; \
+ }while(0)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR2_PVD_LOCK */
+
+#if defined(SYSCFG_CFGR2_SRAM_PARITY_LOCK)
+/** @defgroup SRAM_Parity_Lock SRAM Parity Lock
+ * @{
+ */
+/** @brief SYSCFG Break SRAM PARITY lock
+ * Enables and locks the SRAM_PARITY error signal with Break Input of TIMER1/8/15/16/17
+ * @note The selected configuration is locked and can be unlocked by system reset
+ */
+#define __HAL_SYSCFG_BREAK_SRAMPARITY_LOCK() do {SYSCFG->CFGR2 &= ~(SYSCFG_CFGR2_SRAM_PARITY_LOCK); \
+ SYSCFG->CFGR2 |= SYSCFG_CFGR2_SRAM_PARITY_LOCK; \
+ }while(0)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR2_SRAM_PARITY_LOCK */
+
+/** @defgroup Trigger_Remapping_Enable Trigger Remapping Enable
+ * @{
+ */
+#if defined(SYSCFG_CFGR3_TRIGGER_RMP)
+/** @brief Trigger remapping enable/disable macros
+ * @param __TRIGGER_REMAP__: This parameter can be a value of @ref HAL_Trigger_Remapping
+ */
+#define __HAL_REMAPTRIGGER_ENABLE(__TRIGGER_REMAP__) do {assert_param(IS_HAL_REMAPTRIGGER((__TRIGGER_REMAP__))); \
+ (((__TRIGGER_REMAP__) & HAL_REMAP_CFGR3_MASK) ? \
+ (SYSCFG->CFGR3 |= ((__TRIGGER_REMAP__) & ~HAL_REMAP_CFGR3_MASK)) : \
+ (SYSCFG->CFGR1 |= (__TRIGGER_REMAP__))); \
+ }while(0)
+#define __HAL_REMAPTRIGGER_DISABLE(__TRIGGER_REMAP__) do {assert_param(IS_HAL_REMAPTRIGGER((__TRIGGER_REMAP__))); \
+ (((__TRIGGER_REMAP__) & HAL_REMAP_CFGR3_MASK) ? \
+ (SYSCFG->CFGR3 &= (~(__TRIGGER_REMAP__) | HAL_REMAP_CFGR3_MASK)) : \
+ (SYSCFG->CFGR1 &= ~(__TRIGGER_REMAP__))); \
+ }while(0)
+#else
+/** @brief Trigger remapping enable/disable macros
+ * @param __TRIGGER_REMAP__: This parameter can be a value of @ref HAL_Trigger_Remapping
+ */
+#define __HAL_REMAPTRIGGER_ENABLE(__TRIGGER_REMAP__) do {assert_param(IS_HAL_REMAPTRIGGER((__TRIGGER_REMAP__))); \
+ (SYSCFG->CFGR1 |= (__TRIGGER_REMAP__)); \
+ }while(0)
+#define __HAL_REMAPTRIGGER_DISABLE(__TRIGGER_REMAP__) do {assert_param(IS_HAL_REMAPTRIGGER((__TRIGGER_REMAP__))); \
+ (SYSCFG->CFGR1 &= ~(__TRIGGER_REMAP__)); \
+ }while(0)
+#endif /* SYSCFG_CFGR3_TRIGGER_RMP */
+/**
+ * @}
+ */
+
+#if defined (STM32F302xE) || defined (STM32F303xE) || defined (STM32F398xx)
+/** @defgroup ADC_Trigger_Remapping_Enable ADC Trigger Remapping Enable
+ * @{
+ */
+/** @brief ADC trigger remapping enable/disable macros
+ * @param __ADCTRIGGER_REMAP__: This parameter can be a value of @ref HAL_ADC_Trigger_Remapping
+ */
+#define __HAL_REMAPADCTRIGGER_ENABLE(__ADCTRIGGER_REMAP__) do {assert_param(IS_HAL_REMAPADCTRIGGER((__ADCTRIGGER_REMAP__))); \
+ (SYSCFG->CFGR4 |= (__ADCTRIGGER_REMAP__)); \
+ }while(0)
+#define __HAL_REMAPADCTRIGGER_DISABLE(__ADCTRIGGER_REMAP__) do {assert_param(IS_HAL_REMAPADCTRIGGER((__ADCTRIGGER_REMAP__))); \
+ (SYSCFG->CFGR4 &= ~(__ADCTRIGGER_REMAP__)); \
+ }while(0)
+/**
+ * @}
+ */
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(SYSCFG_CFGR2_BYP_ADDR_PAR)
+/** @defgroup RAM_Parity_Check_Disable RAM Parity Check Disable
+ * @{
+ */
+/**
+ * @brief Parity check on RAM disable macro
+ * @note Disabling the parity check on RAM locks the configuration bit.
+ * To re-enable the parity check on RAM perform a system reset.
+ */
+#define __HAL_SYSCFG_RAM_PARITYCHECK_DISABLE() (*(__IO uint32_t *) CFGR2_BYPADDRPAR_BB = (uint32_t)0x00000001)
+/**
+ * @}
+ */
+#endif /* SYSCFG_CFGR2_BYP_ADDR_PAR */
+
+#if defined(SYSCFG_RCR_PAGE0)
+/** @defgroup CCM_RAM_Page_Write_Protection_Enable CCM RAM page write protection enable
+ * @{
+ */
+/** @brief CCM RAM page write protection enable macro
+ * @param __PAGE_WP__: This parameter can be a value of @ref HAL_Page_Write_Protection
+ * @note write protection can only be disabled by a system reset
+ */
+#define __HAL_SYSCFG_SRAM_WRP_ENABLE(__PAGE_WP__) do {assert_param(IS_HAL_SYSCFG_WP_PAGE((__PAGE_WP__))); \
+ SYSCFG->RCR |= (__PAGE_WP__); \
+ }while(0)
+/**
+ * @}
+ */
+#endif /* SYSCFG_RCR_PAGE0 */
+
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HAL_Exported_Functions HAL Exported Functions
+ * @{
+ */
+
+/** @addtogroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions
+ * @brief Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization and de-initialization functions ******************************/
+HAL_StatusTypeDef HAL_Init(void);
+HAL_StatusTypeDef HAL_DeInit(void);
+void HAL_MspInit(void);
+void HAL_MspDeInit(void);
+HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);
+/**
+ * @}
+ */
+
+/** @addtogroup HAL_Exported_Functions_Group2 HAL Control functions
+ * @brief HAL Control functions
+ * @{
+ */
+/* Peripheral Control functions ************************************************/
+void HAL_IncTick(void);
+void HAL_Delay(__IO uint32_t Delay);
+void HAL_SuspendTick(void);
+void HAL_ResumeTick(void);
+uint32_t HAL_GetTick(void);
+uint32_t HAL_GetHalVersion(void);
+uint32_t HAL_GetREVID(void);
+uint32_t HAL_GetDEVID(void);
+void HAL_EnableDBGSleepMode(void);
+void HAL_DisableDBGSleepMode(void);
+void HAL_EnableDBGStopMode(void);
+void HAL_DisableDBGStopMode(void);
+void HAL_EnableDBGStandbyMode(void);
+void HAL_DisableDBGStandbyMode(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_adc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,217 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_adc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file containing functions prototypes of ADC HAL library.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_ADC_H
+#define __STM32F3xx_ADC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+#include "stm32f3xx_hal_adc_ex.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup ADC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup ADC_Exported_Types ADC Exported Types
+ * @{
+ */
+/**
+ * @brief HAL ADC state machine: ADC States structure definition
+ */
+typedef enum
+{
+ HAL_ADC_STATE_RESET = 0x00, /*!< ADC not yet initialized or disabled */
+ HAL_ADC_STATE_READY = 0x01, /*!< ADC peripheral ready for use */
+ HAL_ADC_STATE_BUSY = 0x02, /*!< An internal process is ongoing */
+ HAL_ADC_STATE_BUSY_REG = 0x12, /*!< Regular conversion is ongoing */
+ HAL_ADC_STATE_BUSY_INJ = 0x22, /*!< Injected conversion is ongoing */
+ HAL_ADC_STATE_BUSY_INJ_REG = 0x32, /*!< Injected and regular conversion are ongoing */
+ HAL_ADC_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_ADC_STATE_ERROR = 0x04, /*!< ADC state error */
+ HAL_ADC_STATE_EOC = 0x05, /*!< Conversion is completed */
+ HAL_ADC_STATE_EOC_REG = 0x15, /*!< Regular conversion is completed */
+ HAL_ADC_STATE_EOC_INJ = 0x25, /*!< Injected conversion is completed */
+ HAL_ADC_STATE_EOC_INJ_REG = 0x35, /*!< Injected and regular conversion are completed */
+ HAL_ADC_STATE_AWD = 0x06, /*!< ADC state analog watchdog (main analog watchdog, present on all STM32 devices) */
+ HAL_ADC_STATE_AWD2 = 0x07, /*!< ADC state analog watchdog (additional analog watchdog, present only on STM32F3 devices) */
+ HAL_ADC_STATE_AWD3 = 0x08, /*!< ADC state analog watchdog (additional analog watchdog, present only on STM32F3 devices) */
+}HAL_ADC_StateTypeDef;
+
+/**
+ * @brief ADC handle Structure definition
+ */
+typedef struct __ADC_HandleTypeDef
+{
+ ADC_TypeDef *Instance; /*!< Register base address */
+
+ ADC_InitTypeDef Init; /*!< ADC required parameters */
+
+ __IO uint32_t NbrOfConversionRank ; /*!< ADC conversion rank counter */
+
+ DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */
+
+ HAL_LockTypeDef Lock; /*!< ADC locking object */
+
+ __IO HAL_ADC_StateTypeDef State; /*!< ADC communication state */
+
+ __IO uint32_t ErrorCode; /*!< ADC Error code */
+}ADC_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup ADC_Exported_Macro ADC Exported Macros
+ * @{
+ */
+/** @brief Reset ADC handle state
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_ADC_STATE_RESET)
+
+/**
+ * @}
+ */
+
+
+/* Include ADC HAL Extended module */
+#include "stm32f3xx_hal_adc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup ADC_Exported_Functions ADC Exported Functions
+ * @{
+ */
+
+/** @addtogroup ADC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+/* Initialization and de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc);
+void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc);
+void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc);
+/**
+ * @}
+ */
+
+/** @addtogroup ADC_Exported_Functions_Group2 Input and Output operation functions
+ * @brief IO operation functions
+ * @{
+ */
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout);
+
+/* Non-blocking mode: Interruption */
+HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc);
+
+/* Non-blocking mode: DMA */
+HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length);
+HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc);
+
+/* ADC retrieve conversion value intended to be used with polling or interruption */
+uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc);
+
+/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption and DMA) */
+void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc);
+void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc);
+/**
+ * @}
+ */
+
+/** @addtogroup ADC_Exported_Functions_Group3 Peripheral Control functions
+ * @brief Peripheral Control functions
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig);
+HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig);
+/**
+ * @}
+ */
+
+/** @defgroup ADC_Exported_Functions_Group4 Peripheral State functions
+ * @brief ADC Peripheral State functions
+ * @{
+ */
+/* Peripheral State functions *************************************************/
+HAL_ADC_StateTypeDef HAL_ADC_GetState(ADC_HandleTypeDef* hadc);
+uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F3xx_ADC_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_adc_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,3662 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_adc_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file containing functions prototypes of ADC HAL library.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_ADC_EX_H
+#define __STM32F3xx_ADC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup ADCEx ADC Extended HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup ADCEx_Exported_Types ADC Extented Exported Types
+ * @{
+ */
+struct __ADC_HandleTypeDef;
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/**
+ * @brief Structure definition of ADC initialization and regular group
+ * @note Parameters of this structure are shared within 2 scopes:
+ * - Scope entire ADC (affects regular and injected groups): ClockPrescaler, Resolution, DataAlign,
+ * ScanConvMode, EOCSelection, LowPowerAutoWait.
+ * - Scope regular group: ContinuousConvMode, NbrOfConversion, DiscontinuousConvMode, NbrOfDiscConversion, ExternalTrigConvEdge, ExternalTrigConv, DMAContinuousRequests, Overrun.
+ * @note The setting of these parameters with function HAL_ADC_Init() is conditioned to ADC state.
+ * ADC state can be either:
+ * - For all parameters: ADC disabled
+ * - For all parameters except 'LowPowerAutoWait' and 'DMAContinuousRequests': ADC enabled without conversion on going on regular group.
+ * - For parameters 'LowPowerAutoWait' and 'DMAContinuousRequests': ADC enabled without conversion on going on regular and injected groups.
+ * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed
+ * without error reporting without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fullfills the ADC state condition) on the fly).
+ */
+typedef struct
+{
+ uint32_t ClockPrescaler; /*!< Select ADC clock source (synchronous clock derived from AHB clock or asynchronous clock derived from ADC dedicated PLL 72MHz) and clock prescaler.
+ The clock is common for all the ADCs.
+ This parameter can be a value of @ref ADCEx_ClockPrescaler
+ Note: In case of usage of channels on injected group, ADC frequency should be low than AHB clock frequency /4 for resolution 12 or 10 bits,
+ AHB clock frequency /3 for resolution 8 bits, AHB clock frequency /2 for resolution 6 bits.
+ Note: In case of usage of the ADC dedicated PLL clock, this clock must be preliminarily enabled and prescaler set at RCC top level.
+ Note: This parameter can be modified only if all ADCs of the common ADC group are disabled (for products with several ADCs) */
+ uint32_t Resolution; /*!< Configures the ADC resolution.
+ This parameter can be a value of @ref ADCEx_Resolution */
+ uint32_t DataAlign; /*!< Specifies ADC data alignment to right (for resolution 12 bits: MSB on register bit 11 and LSB on register bit 0) (default setting)
+ or to left (for resolution 12 bits, if offset disabled: MSB on register bit 15 and LSB on register bit 4, if offset enabled: MSB on register bit 14 and LSB on register bit 3).
+ See reference manual for alignments with other resolutions.
+ This parameter can be a value of @ref ADCEx_Data_align */
+ uint32_t ScanConvMode; /*!< Configures the sequencer of regular and injected groups.
+ This parameter can be associated to parameter 'DiscontinuousConvMode' to have main sequence subdivided in successive parts.
+ If disabled: Conversion is performed in single mode (one channel converted, the one defined in rank 1).
+ Parameters 'NbrOfConversion' and 'InjectedNbrOfConversion' are discarded (equivalent to set to 1).
+ If enabled: Conversions are performed in sequence mode (multiple ranks defined by 'NbrOfConversion'/'InjectedNbrOfConversion' and each channel rank).
+ Scan direction is upward: from rank1 to rank 'n'.
+ This parameter can be a value of @ref ADCEx_Scan_mode */
+ uint32_t EOCSelection; /*!< Specifies what EOC (End Of Conversion) flag is used for conversion by polling and interruption: end of conversion of each rank or complete sequence.
+ This parameter can be a value of @ref ADCEx_EOCSelection. */
+ uint32_t LowPowerAutoWait; /*!< Selects the dynamic low power Auto Delay: new conversion start only when the previous
+ conversion (for regular group) or previous sequence (for injected group) has been treated by user software.
+ This feature automatically adapts the speed of ADC to the speed of the system that reads the data. Moreover, this avoids risk of overrun for low frequency applications.
+ This parameter can be set to ENABLE or DISABLE.
+ Note: Do not use with interruption or DMA (HAL_ADC_Start_IT(), HAL_ADC_Start_DMA()) since they have to clear immediately the EOC flag to free the IRQ vector sequencer.
+ Do use with polling: 1. Start conversion with HAL_ADC_Start(), 2. Later on, when conversion data is needed: use HAL_ADC_PollForConversion() to ensure that conversion is completed
+ and use HAL_ADC_GetValue() to retrieve conversion result and trig another conversion. */
+ uint32_t ContinuousConvMode; /*!< Specifies whether the conversion is performed in single mode (one conversion) or continuous mode for regular group,
+ after the selected trigger occurred (software start or external trigger).
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t NbrOfConversion; /*!< Specifies the number of ranks that will be converted within the regular group sequencer.
+ To use the regular group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 16.
+ Note: This parameter must be modified when no conversion is on going on regular group (ADC disabled, or ADC enabled without continuous mode or external trigger that could lauch a conversion). */
+ uint32_t DiscontinuousConvMode; /*!< Specifies whether the conversions sequence of regular group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
+ Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
+ Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t NbrOfDiscConversion; /*!< Specifies the number of discontinuous conversions in which the main sequence of regular group (parameter NbrOfConversion) will be subdivided.
+ If parameter 'DiscontinuousConvMode' is disabled, this parameter is discarded.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 8. */
+ uint32_t ExternalTrigConv; /*!< Selects the external event used to trigger the conversion start of regular group.
+ If set to ADC_SOFTWARE_START, external triggers are disabled.
+ This parameter can be a value of @ref ADCEx_External_trigger_source_Regular
+ Caution: For devices with several ADCs, external trigger source is common to ADC common group (for example: ADC1&ADC2, ADC3&ADC4, if available) */
+ uint32_t ExternalTrigConvEdge; /*!< Selects the external trigger edge of regular group.
+ If trigger is set to ADC_SOFTWARE_START, this parameter is discarded.
+ This parameter can be a value of @ref ADCEx_External_trigger_edge_Regular */
+ uint32_t DMAContinuousRequests; /*!< Specifies whether the DMA requests are performed in one shot mode (DMA transfer stop when number of conversions is reached)
+ or in Continuous mode (DMA transfer unlimited, whatever number of conversions).
+ Note: In continuous mode, DMA must be configured in circular mode. Otherwise an overrun will be triggered when DMA buffer maximum pointer is reached.
+ This parameter can be set to ENABLE or DISABLE.
+ Note: This parameter must be modified when no conversion is on going on both regular and injected groups (ADC disabled, or ADC enabled without continuous mode or external trigger that could lauch a conversion). */
+ uint32_t Overrun; /*!< Select the behaviour in case of overrun: data overwritten (default) or preserved.
+ This parameter is for regular group only.
+ This parameter can be a value of @ref ADCEx_Overrun
+ Note: Case of overrun set to data preserved and usage with end on conversion interruption (HAL_Start_IT()): ADC IRQ handler has to clear end of conversion flags, this induces the release of the preserved data. If needed, this data can be saved into function HAL_ADC_ConvCpltCallback() (called before end of conversion flags clear).
+ Note: Error reporting in function of conversion mode:
+ - Usage with ADC conversion by polling for event or interruption: Error is reported only if overrun is set to data preserved. If overrun is set to data overwritten, user can willingly not read the conversion data each time, this is not considered as an erroneous case.
+ - Usage with ADC conversion by DMA: Error is reported whatever overrun setting (DMA is expected to process all data from data register, any data missed would be abnormal). */
+}ADC_InitTypeDef;
+
+/**
+ * @brief Structure definition of ADC channel for regular group
+ * @note The setting of these parameters with function HAL_ADC_ConfigChannel() is conditioned to ADC state.
+ * ADC state can be either:
+ * - For all parameters: ADC disabled (this is the only possible ADC state to modify parameter 'SingleDiff')
+ * - For all except parameters 'SamplingTime', 'Offset', 'OffsetNumber': ADC enabled without conversion on going on regular group.
+ * - For parameters 'SamplingTime', 'Offset', 'OffsetNumber': ADC enabled without conversion on going on regular and injected groups.
+ * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed
+ * without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly).
+ */
+typedef struct
+{
+ uint32_t Channel; /*!< Specifies the channel to configure into ADC regular group.
+ This parameter can be a value of @ref ADCEx_channels
+ Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. */
+ uint32_t Rank; /*!< Specifies the rank in the regular group sequencer.
+ This parameter can be a value of @ref ADCEx_regular_rank
+ Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */
+ uint32_t SamplingTime; /*!< Sampling time value to be set for the selected channel.
+ Unit: ADC clock cycles
+ Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, 8.5 cycles at 8 bits, 6.5 cycles at 6 bits).
+ This parameter can be a value of @ref ADCEx_sampling_times
+ Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
+ If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
+ Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor),
+ sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
+ Refer to device datasheet for timings values, parameters TS_vrefint, TS_vbat, TS_temp (values rough order: 2.2us min). */
+ uint32_t SingleDiff; /*!< Selection of single-ended or differential input.
+ In differential mode: Differential measurement is between the selected channel 'i' (positive input) and channel 'i+1' (negative input).
+ Only channel 'i' has to be configured, channel 'i+1' is configured automatically.
+ This parameter must be a value of @ref ADCEx_SingleDifferential
+ Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
+ If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
+ Note: Channels 1 to 14 are available in differential mode. Channels 15, 16, 17, 18 can be used only in single-ended mode.
+ Note: When configuring a channel 'i' in differential mode, the channel 'i+1' is not usable separately.
+ Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion).
+ If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behaviour in case of another parameter update on the fly) */
+ uint32_t OffsetNumber; /*!< Selects the offset number
+ This parameter can be a value of @ref ADCEx_OffsetNumber
+ Caution: Only one channel is allowed per channel. If another channel was on this offset number, the offset will be changed to the new channel */
+ uint32_t Offset; /*!< Defines the offset to be subtracted from the raw converted data when convert channels.
+ Offset value must be a positive number.
+ Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively.
+ Note: This parameter must be modified when no conversion is on going on both regular and injected groups (ADC disabled, or ADC enabled without continuous mode or external trigger that could lauch a conversion). */
+}ADC_ChannelConfTypeDef;
+
+/**
+ * @brief Structure definition of ADC injected group and ADC channel for injected group
+ * @note Parameters of this structure are shared within 2 scopes:
+ * - Scope channel: InjectedChannel, InjectedRank, InjectedSamplingTime , InjectedSingleDiff, InjectedOffsetNumber, InjectedOffset
+ * - Scope injected group (affects all channels of injected group): InjectedNbrOfConversion, InjectedDiscontinuousConvMode,
+ * AutoInjectedConv, QueueInjectedContext, ExternalTrigInjecConvEdge, ExternalTrigInjecConv.
+ * @note The setting of these parameters with function HAL_ADCEx_InjectedConfigChannel() is conditioned to ADC state.
+ * ADC state can be either:
+ * - For all parameters: ADC disabled (this is the only possible ADC state to modify parameter 'InjectedSingleDiff')
+ * - For parameters 'InjectedDiscontinuousConvMode', 'QueueInjectedContext': ADC enabled without conversion on going on injected group.
+ * - For parameters 'InjectedSamplingTime', 'InjectedOffset', 'InjectedOffsetNumber', 'AutoInjectedConv': ADC enabled without conversion on going on regular and injected groups.
+ * - For parameters 'InjectedChannel', 'InjectedRank', 'InjectedNbrOfConversion', 'ExternalTrigInjecConv', 'ExternalTrigInjecConvEdge': ADC enabled and while conversion on going on regular and injected groups.
+ * If ADC is not in the appropriate state to modify some parameters, these parameters setting is bypassed
+ * without error reporting without error reporting (as it can be the expected behaviour in case of intended action to update another parameter (which fulfills the ADC state condition) on the fly).
+ */
+typedef struct
+{
+ uint32_t InjectedChannel; /*!< Configure the ADC injected channel
+ This parameter can be a value of @ref ADCEx_channels
+ Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. */
+ uint32_t InjectedRank; /*!< The rank in the regular group sequencer
+ This parameter must be a value of @ref ADCEx_injected_rank
+ Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */
+ uint32_t InjectedSamplingTime; /*!< Sampling time value to be set for the selected channel.
+ Unit: ADC clock cycles
+ Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits, 10.5 cycles at 10 bits, 8.5 cycles at 8 bits, 6.5 cycles at 6 bits).
+ This parameter can be a value of @ref ADCEx_sampling_times
+ Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
+ If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
+ Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor),
+ sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
+ Refer to device datasheet for timings values, parameters TS_vrefint, TS_vbat, TS_temp (values rough order: 2.2us min). */
+ uint32_t InjectedSingleDiff; /*!< Selection of single-ended or differential input.
+ In differential mode: Differential measurement is between the selected channel 'i' (positive input) and channel 'i+1' (negative input).
+ Only channel 'i' has to be configured, channel 'i+1' is configured automatically.
+ This parameter must be a value of @ref ADCEx_SingleDifferential
+ Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
+ If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
+ Note: Channels 1 to 14 are available in differential mode. Channels 15, 16, 17, 18 can be used only in single-ended mode.
+ Note: When configuring a channel 'i' in differential mode, the channel 'i-1' is not usable separately.
+ Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion).
+ If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behaviour in case of another parameter update on the fly) */
+ uint32_t InjectedOffsetNumber; /*!< Selects the offset number
+ This parameter can be a value of @ref ADCEx_OffsetNumber
+ Caution: Only one channel is allowed per offset number. If another channel was on this offset number, the offset will be changed to the new channel. */
+ uint32_t InjectedOffset; /*!< Defines the offset to be subtracted from the raw converted data.
+ Offset value must be a positive number.
+ Depending of ADC resolution selected (12, 10, 8 or 6 bits),
+ this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */
+ uint32_t InjectedNbrOfConversion; /*!< Specifies the number of ranks that will be converted within the injected group sequencer.
+ To use the injected group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 4.
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+ uint32_t InjectedDiscontinuousConvMode; /*!< Specifies whether the conversions sequence of injected group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
+ Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
+ Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
+ This parameter can be set to ENABLE or DISABLE.
+ Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion).
+ Note: For injected group, number of discontinuous ranks increment is fixed to one-by-one.
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+ uint32_t AutoInjectedConv; /*!< Enables or disables the selected ADC automatic injected group conversion after regular one
+ This parameter can be set to ENABLE or DISABLE.
+ Note: To use Automatic injected conversion, discontinuous mode must be disabled ('DiscontinuousConvMode' and 'InjectedDiscontinuousConvMode' set to DISABLE)
+ Note: To use Automatic injected conversion, injected group external triggers must be disabled ('ExternalTrigInjecConv' set to ADC_SOFTWARE_START)
+ Note: In case of DMA used with regular group: if DMA configured in normal mode (single shot) JAUTO will be stopped upon DMA transfer complete.
+ To maintain JAUTO always enabled, DMA must be configured in circular mode.
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+ uint32_t QueueInjectedContext; /*!< Specifies whether the context queue feature is enabled.
+ This parameter can be set to ENABLE or DISABLE.
+ If context queue is enabled, injected sequencer&channels configurations are queued on up to 2 contexts. If a
+ new injected context is set when queue is full, error is triggered by interruption and through function 'HAL_ADCEx_InjectedQueueOverflowCallback'.
+ Caution: This feature request that the sequence is fully configured before injected conversion start.
+ Therefore, configure channels with HAL_ADCEx_InjectedConfigChannel() as many times as value of 'InjectedNbrOfConversion' parameter.
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set.
+ Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion). */
+ uint32_t ExternalTrigInjecConv; /*!< Selects the external event used to trigger the conversion start of injected group.
+ If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled.
+ This parameter can be a value of @ref ADCEx_External_trigger_source_Injected
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+ uint32_t ExternalTrigInjecConvEdge; /*!< Selects the external trigger edge of injected group.
+ This parameter can be a value of @ref ADCEx_External_trigger_edge_Injected.
+ If trigger is set to ADC_INJECTED_SOFTWARE_START, this parameter is discarded.
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+}ADC_InjectionConfTypeDef;
+
+/**
+ * @brief Structure definition of ADC analog watchdog
+ * @note The setting of these parameters with function HAL_ADC_AnalogWDGConfig() is conditioned to ADC state.
+ * ADC state can be either: ADC disabled or ADC enabled without conversion on going on regular and injected groups.
+ */
+typedef struct
+{
+ uint32_t WatchdogNumber; /*!< Selects which ADC analog watchdog to apply to the selected channel.
+ For Analog Watchdog 1: Only 1 channel can be monitored (or overall group of channels by setting parameter 'WatchdogMode')
+ For Analog Watchdog 2 and 3: Several channels can be monitored (by successive calls of 'HAL_ADC_AnalogWDGConfig()' for each channel)
+ This parameter can be a value of @ref ADCEx_analog_watchdog_number. */
+ uint32_t WatchdogMode; /*!< For Analog Watchdog 1: Configures the ADC analog watchdog mode: single channel/overall group of channels, regular/injected group.
+ For Analog Watchdog 2 and 3: There is no configuration for overall group of channels as AWD1. Set value 'ADC_ANALOGWATCHDOG_NONE' to reset channels group programmed with parameter 'Channel', set any other value to not use this parameter.
+ This parameter can be a value of @ref ADCEx_analog_watchdog_mode. */
+ uint32_t Channel; /*!< Selects which ADC channel to monitor by analog watchdog.
+ For Analog Watchdog 1: this parameter has an effect only if parameter 'WatchdogMode' is configured on single channel. Only 1 channel can be monitored.
+ For Analog Watchdog 2 and 3: Several channels can be monitored (successive calls of HAL_ADC_AnalogWDGConfig() must be done, one for each channel.
+ Channels group reset can be done by setting WatchdogMode to 'ADC_ANALOGWATCHDOG_NONE').
+ This parameter can be a value of @ref ADCEx_channels. */
+ uint32_t ITMode; /*!< Specifies whether the analog watchdog is configured in interrupt or polling mode.
+ This parameter can be set to ENABLE or DISABLE */
+ uint32_t HighThreshold; /*!< Configures the ADC analog watchdog High threshold value.
+ Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively.
+ Note: Analog watchdog 2 and 3 are limited to a resolution of 8 bits: if ADC resolution is 12 bits
+ the 4 LSB are ignored, if ADC resolution is 10 bits the 2 LSB are ignored. */
+ uint32_t LowThreshold; /*!< Configures the ADC analog watchdog High threshold value.
+ Depending of ADC resolution selected (12, 10, 8 or 6 bits), this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively.
+ Note: Analog watchdog 2 and 3 are limited to a resolution of 8 bits: if ADC resolution is 12 bits
+ the 4 LSB are ignored, if ADC resolution is 10 bits the 2 LSB are ignored. */
+}ADC_AnalogWDGConfTypeDef;
+
+/**
+ * @brief Structure definition of ADC multimode
+ * @note The setting of these parameters with function HAL_ADCEx_MultiModeConfigChannel() is conditioned to ADCs state (both ADCs of the common group).
+ * State of ADCs of the common group must be: disabled.
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Configures the ADC to operate in independent or multi mode.
+ This parameter can be a value of @ref ADCEx_Common_mode */
+ uint32_t DMAAccessMode; /*!< Configures the DMA mode for multi ADC mode:
+ selection whether 2 DMA channels (each ADC use its own DMA channel) or 1 DMA channel (one DMA channel for both ADC, DMA of ADC master)
+ This parameter can be a value of @ref ADCEx_Direct_memory_access_mode_for_multimode
+ Caution: Limitations with multimode DMA access enabled (1 DMA channel used): In case of dual mode in high speed (more than 5Msps) or high activity of DMA by other peripherals, there is a risk of DMA overrun.
+ Therefore, it is recommended to disable multimode DMA access: each ADC use its own DMA channel. */
+ uint32_t TwoSamplingDelay; /*!< Configures the Delay between 2 sampling phases.
+ This parameter can be a value of @ref ADCEx_delay_between_2_sampling_phases
+ Delay range depends on selected resolution: from 1 to 12 clock cycles for 12 bits, from 1 to 10 clock cycles for 10 bits
+ from 1 to 8 clock cycles for 8 bits, from 1 to 6 clock cycles for 6 bits */
+}ADC_MultiModeTypeDef;
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/**
+ * @brief Structure definition of ADC and regular group initialization
+ * @note Parameters of this structure are shared within 2 scopes:
+ * - Scope entire ADC (affects regular and injected groups): DataAlign, ScanConvMode.
+ * - Scope regular group: ContinuousConvMode, NbrOfConversion, DiscontinuousConvMode, NbrOfDiscConversion, ExternalTrigConvEdge, ExternalTrigConv.
+ * @note The setting of these parameters with function HAL_ADC_Init() is conditioned to ADC state.
+ * ADC can be either disabled or enabled without conversion on going on regular group.
+ */
+typedef struct
+{
+ uint32_t DataAlign; /*!< Specifies ADC data alignment to right (MSB on register bit 11 and LSB on register bit 0) (default setting)
+ or to left (if regular group: MSB on register bit 15 and LSB on register bit 4, if injected group (MSB kept as signed value due to potential negative value after offset application): MSB on register bit 14 and LSB on register bit 3).
+ This parameter can be a value of @ref ADCEx_Data_align */
+ uint32_t ScanConvMode; /*!< Configures the sequencer of regular and injected groups.
+ This parameter can be associated to parameter 'DiscontinuousConvMode' to have main sequence subdivided in successive parts.
+ If disabled: Conversion is performed in single mode (one channel converted, the one defined in rank 1).
+ Parameters 'NbrOfConversion' and 'InjectedNbrOfConversion' are discarded (equivalent to set to 1).
+ If enabled: Conversions are performed in sequence mode (multiple ranks defined by 'NbrOfConversion'/'InjectedNbrOfConversion' and each channel rank).
+ Scan direction is upward: from rank1 to rank 'n'.
+ This parameter can be a value of @ref ADCEx_Scan_mode
+ Note: For regular group, this parameter should be enabled in conversion either by polling (HAL_ADC_Start with Discontinuous mode and NbrOfDiscConversion=1)
+ or by DMA (HAL_ADC_Start_DMA), but not by interruption (HAL_ADC_Start_IT): in scan mode, interruption is triggered only on the
+ the last conversion of the sequence. All previous conversions would be overwritten by the last one.
+ Injected group used with scan mode has not this constraint: each rank has its own result register, no data is overwritten. */
+ uint32_t ContinuousConvMode; /*!< Specifies whether the conversion is performed in single mode (one conversion) or continuous mode for regular group,
+ after the selected trigger occurred (software start or external trigger).
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t NbrOfConversion; /*!< Specifies the number of ranks that will be converted within the regular group sequencer.
+ To use regular group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 16. */
+ uint32_t DiscontinuousConvMode; /*!< Specifies whether the conversions sequence of regular group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
+ Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
+ Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
+ This parameter can be set to ENABLE or DISABLE. */
+ uint32_t NbrOfDiscConversion; /*!< Specifies the number of discontinuous conversions in which the main sequence of regular group (parameter NbrOfConversion) will be subdivided.
+ If parameter 'DiscontinuousConvMode' is disabled, this parameter is discarded.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 8. */
+ uint32_t ExternalTrigConv; /*!< Selects the external event used to trigger the conversion start of regular group.
+ If set to ADC_SOFTWARE_START, external triggers are disabled.
+ If set to external trigger source, triggering is on event rising edge.
+ This parameter can be a value of @ref ADCEx_External_trigger_source_Regular */
+}ADC_InitTypeDef;
+
+/**
+ * @brief Structure definition of ADC channel for regular group
+ * @note The setting of these parameters with function HAL_ADC_ConfigChannel() is conditioned to ADC state.
+ * ADC can be either disabled or enabled without conversion on going on regular group.
+ */
+typedef struct
+{
+ uint32_t Channel; /*!< Specifies the channel to configure into ADC regular group.
+ This parameter can be a value of @ref ADCEx_channels
+ Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. */
+ uint32_t Rank; /*!< Specifies the rank in the regular group sequencer
+ This parameter can be a value of @ref ADCEx_regular_rank
+ Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */
+ uint32_t SamplingTime; /*!< Sampling time value to be set for the selected channel.
+ Unit: ADC clock cycles
+ Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits).
+ This parameter can be a value of @ref ADCEx_sampling_times
+ Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
+ If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
+ Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor),
+ sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
+ Refer to device datasheet for timings values, parameters TS_vrefint, TS_vbat, TS_temp (values rough order: 5us to 17.1us min). */
+}ADC_ChannelConfTypeDef;
+
+/**
+ * @brief ADC Configuration injected Channel structure definition
+ * @note Parameters of this structure are shared within 2 scopes:
+ * - Scope channel: InjectedChannel, InjectedRank, InjectedSamplingTime, InjectedOffset
+ * - Scope injected group (affects all channels of injected group): InjectedNbrOfConversion, InjectedDiscontinuousConvMode,
+ * AutoInjectedConv, ExternalTrigInjecConvEdge, ExternalTrigInjecConv.
+ * @note The setting of these parameters with function HAL_ADCEx_InjectedConfigChannel() is conditioned to ADC state.
+ * ADC state can be either:
+ * - For all parameters: ADC disabled (this is the only possible ADC state to modify parameter 'ExternalTrigInjecConv')
+ * - For all except parameters 'ExternalTrigInjecConv': ADC enabled without conversion on going on injected group.
+ */
+typedef struct
+{
+ uint32_t InjectedChannel; /*!< Selection of ADC channel to configure
+ This parameter can be a value of @ref ADCEx_channels
+ Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. */
+ uint32_t InjectedRank; /*!< Rank in the injected group sequencer
+ This parameter must be a value of @ref ADCEx_injected_rank
+ Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */
+ uint32_t InjectedSamplingTime; /*!< Sampling time value to be set for the selected channel.
+ Unit: ADC clock cycles
+ Conversion time is the addition of sampling time and processing time (12.5 ADC clock cycles at ADC resolution 12 bits).
+ This parameter can be a value of @ref ADCEx_sampling_times
+ Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
+ If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
+ Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor),
+ sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
+ Refer to device datasheet for timings values, parameters TS_vrefint, TS_vbat, TS_temp (values rough order: 5us to 17.1us min). */
+ uint32_t InjectedOffset; /*!< Defines the offset to be subtracted from the raw converted data (for channels set on injected group only).
+ Offset value must be a positive number.
+ Depending of ADC resolution selected (12, 10, 8 or 6 bits),
+ this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */
+ uint32_t InjectedNbrOfConversion; /*!< Specifies the number of ranks that will be converted within the injected group sequencer.
+ To use the injected group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 4.
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+ uint32_t InjectedDiscontinuousConvMode; /*!< Specifies whether the conversions sequence of injected group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
+ Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
+ Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
+ This parameter can be set to ENABLE or DISABLE.
+ Note: For injected group, number of discontinuous ranks increment is fixed to one-by-one.
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+ uint32_t AutoInjectedConv; /*!< Enables or disables the selected ADC automatic injected group conversion after regular one
+ This parameter can be set to ENABLE or DISABLE.
+ Note: To use Automatic injected conversion, discontinuous mode must be disabled ('DiscontinuousConvMode' and 'InjectedDiscontinuousConvMode' set to DISABLE)
+ Note: To use Automatic injected conversion, injected group external triggers must be disabled ('ExternalTrigInjecConv' set to ADC_SOFTWARE_START)
+ Note: In case of DMA used with regular group: if DMA configured in normal mode (single shot) JAUTO will be stopped upon DMA transfer complete.
+ To maintain JAUTO always enabled, DMA must be configured in circular mode.
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+ uint32_t ExternalTrigInjecConv; /*!< Selects the external event used to trigger the conversion start of injected group.
+ If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled.
+ If set to external trigger source, triggering is on event rising edge.
+ This parameter can be a value of @ref ADCEx_External_trigger_source_Injected
+ Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion).
+ If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behaviour in case of another parameter update on the fly)
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+}ADC_InjectionConfTypeDef;
+
+/**
+ * @brief ADC Configuration analog watchdog definition
+ * @note The setting of these parameters with function is conditioned to ADC state.
+ * ADC state can be either disabled or enabled without conversion on going on regular and injected groups.
+ */
+typedef struct
+{
+ uint32_t WatchdogMode; /*!< Configures the ADC analog watchdog mode: single/all channels, regular/injected group.
+ This parameter can be a value of @ref ADCEx_analog_watchdog_mode. */
+ uint32_t Channel; /*!< Selects which ADC channel to monitor by analog watchdog.
+ This parameter has an effect only if watchdog mode is configured on single channel (parameter WatchdogMode)
+ This parameter can be a value of @ref ADCEx_channels. */
+ uint32_t ITMode; /*!< Specifies whether the analog watchdog is configured in interrupt or polling mode.
+ This parameter can be set to ENABLE or DISABLE */
+ uint32_t HighThreshold; /*!< Configures the ADC analog watchdog High threshold value.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+ uint32_t LowThreshold; /*!< Configures the ADC analog watchdog High threshold value.
+ This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */
+ uint32_t WatchdogNumber; /*!< Reserved for future use, can be set to 0 */
+}ADC_AnalogWDGConfTypeDef;
+#endif /* STM32F373xC || STM32F378xx */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup ADCEx_Exported_Constants ADC Extended Exported Constants
+ * @{
+ */
+
+/** @defgroup ADCEx_Error_Code ADC Extended Error Code
+ * @{
+ */
+#define HAL_ADC_ERROR_NONE ((uint32_t)0x00) /*!< No error */
+#define HAL_ADC_ERROR_INTERNAL ((uint32_t)0x01) /*!< ADC IP internal error: if problem of clocking,
+ enable/disable, erroneous state */
+#define HAL_ADC_ERROR_OVR ((uint32_t)0x02) /*!< Overrun error */
+#define HAL_ADC_ERROR_DMA ((uint32_t)0x04) /*!< DMA transfer error */
+#define HAL_ADC_ERROR_JQOVF ((uint32_t)0x08) /*!< Injected context queue overflow error */
+/**
+ * @}
+ */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/** @defgroup ADCEx_ClockPrescaler ADC Extended Clock Prescaler
+ * @{
+ */
+#define ADC_CLOCK_ASYNC ((uint32_t)0x00000000) /*!< ADC asynchronous clock derived from ADC dedicated PLL */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define ADC_CLOCK_SYNC_PCLK_DIV1 ((uint32_t)ADC12_CCR_CKMODE_0) /*!< ADC synchronous clock derived from AHB clock without prescaler */
+#define ADC_CLOCK_SYNC_PCLK_DIV2 ((uint32_t)ADC12_CCR_CKMODE_1) /*!< ADC synchronous clock derived from AHB clock divided by a prescaler of 2 */
+#define ADC_CLOCK_SYNC_PCLK_DIV4 ((uint32_t)ADC12_CCR_CKMODE) /*!< ADC synchronous clock derived from AHB clock divided by a prescaler of 4 */
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define ADC_CLOCK_SYNC_PCLK_DIV1 ((uint32_t)ADC1_CCR_CKMODE_0) /*!< ADC synchronous clock derived from AHB clock without prescaler */
+#define ADC_CLOCK_SYNC_PCLK_DIV2 ((uint32_t)ADC1_CCR_CKMODE_1) /*!< ADC synchronous clock derived from AHB clock divided by a prescaler of 2 */
+#define ADC_CLOCK_SYNC_PCLK_DIV4 ((uint32_t)ADC1_CCR_CKMODE) /*!< ADC synchronous clock derived from AHB clock divided by a prescaler of 4 */
+#endif /* STM32F301x8 || STM32F318xx || STM32F302x8 */
+
+#define ADC_CLOCKPRESCALER_PCLK_DIV1 ADC_CLOCK_SYNC_PCLK_DIV1 /* Obsolete naming, kept for compatibility with some other devices */
+#define ADC_CLOCKPRESCALER_PCLK_DIV2 ADC_CLOCK_SYNC_PCLK_DIV2 /* Obsolete naming, kept for compatibility with some other devices */
+#define ADC_CLOCKPRESCALER_PCLK_DIV4 ADC_CLOCK_SYNC_PCLK_DIV4 /* Obsolete naming, kept for compatibility with some other devices */
+
+#define IS_ADC_CLOCKPRESCALER(ADC_CLOCK) (((ADC_CLOCK) == ADC_CLOCK_ASYNC) || \
+ ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV1) || \
+ ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV2) || \
+ ((ADC_CLOCK) == ADC_CLOCK_SYNC_PCLK_DIV4) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_Resolution ADC Extended Resolution
+ * @{
+ */
+#define ADC_RESOLUTION12b ((uint32_t)0x00000000) /*!< ADC 12-bit resolution */
+#define ADC_RESOLUTION10b ((uint32_t)ADC_CFGR_RES_0) /*!< ADC 10-bit resolution */
+#define ADC_RESOLUTION8b ((uint32_t)ADC_CFGR_RES_1) /*!< ADC 8-bit resolution */
+#define ADC_RESOLUTION6b ((uint32_t)ADC_CFGR_RES) /*!< ADC 6-bit resolution */
+
+#define IS_ADC_RESOLUTION(RESOLUTION) (((RESOLUTION) == ADC_RESOLUTION12b) || \
+ ((RESOLUTION) == ADC_RESOLUTION10b) || \
+ ((RESOLUTION) == ADC_RESOLUTION8b) || \
+ ((RESOLUTION) == ADC_RESOLUTION6b) )
+
+#define IS_ADC_RESOLUTION_8_6_BITS(RESOLUTION) (((RESOLUTION) == ADC_RESOLUTION8b) || \
+ ((RESOLUTION) == ADC_RESOLUTION6b) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_Data_align ADC Extended Data Alignment
+ * @{
+ */
+#define ADC_DATAALIGN_RIGHT ((uint32_t)0x00000000)
+#define ADC_DATAALIGN_LEFT ((uint32_t)ADC_CFGR_ALIGN)
+
+#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DATAALIGN_RIGHT) || \
+ ((ALIGN) == ADC_DATAALIGN_LEFT) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_Scan_mode ADC Extended Scan Mode
+ * @{
+ */
+#define ADC_SCAN_DISABLE ((uint32_t)0x00000000)
+#define ADC_SCAN_ENABLE ((uint32_t)0x00000001)
+
+#define IS_ADC_SCAN_MODE(SCAN_MODE) (((SCAN_MODE) == ADC_SCAN_DISABLE) || \
+ ((SCAN_MODE) == ADC_SCAN_ENABLE) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_edge_Regular ADC Extended External trigger enable and polarity selection for regular channels
+ * @{
+ */
+#define ADC_EXTERNALTRIGCONVEDGE_NONE ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGCONVEDGE_RISING ((uint32_t)ADC_CFGR_EXTEN_0)
+#define ADC_EXTERNALTRIGCONVEDGE_FALLING ((uint32_t)ADC_CFGR_EXTEN_1)
+#define ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING ((uint32_t)ADC_CFGR_EXTEN)
+
+#define IS_ADC_EXTTRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGCONVEDGE_NONE) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISING) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_FALLING) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_source_Regular ADC Extended External trigger selection for regular group
+ * @{
+ */
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx)
+/*!< List of external triggers with generic trigger name, independently of */
+/* ADC target (caution: applies to other ADCs sharing the same common group), */
+/* sorted by trigger name: */
+
+/*!< External triggers of regular group for ADC1&ADC2 only */
+#define ADC_EXTERNALTRIGCONV_T1_CC1 ADC1_2_EXTERNALTRIG_T1_CC1
+#define ADC_EXTERNALTRIGCONV_T1_CC2 ADC1_2_EXTERNALTRIG_T1_CC2
+#define ADC_EXTERNALTRIGCONV_T2_CC2 ADC1_2_EXTERNALTRIG_T2_CC2
+#define ADC_EXTERNALTRIGCONV_T3_CC4 ADC1_2_EXTERNALTRIG_T3_CC4
+#define ADC_EXTERNALTRIGCONV_T4_CC4 ADC1_2_EXTERNALTRIG_T4_CC4
+#define ADC_EXTERNALTRIGCONV_T6_TRGO ADC1_2_EXTERNALTRIG_T6_TRGO
+#define ADC_EXTERNALTRIGCONV_EXT_IT11 ADC1_2_EXTERNALTRIG_EXT_IT11
+
+/*!< External triggers of regular group for ADC3&ADC4 only */
+#define ADC_EXTERNALTRIGCONV_T2_CC1 ADC3_4_EXTERNALTRIG_T2_CC1
+#define ADC_EXTERNALTRIGCONV_T2_CC3 ADC3_4_EXTERNALTRIG_T2_CC3
+#define ADC_EXTERNALTRIGCONV_T3_CC1 ADC3_4_EXTERNALTRIG_T3_CC1
+#define ADC_EXTERNALTRIGCONV_T4_CC1 ADC3_4_EXTERNALTRIG_T4_CC1
+#define ADC_EXTERNALTRIGCONV_T7_TRGO ADC3_4_EXTERNALTRIG_T7_TRGO
+#define ADC_EXTERNALTRIGCONV_T8_CC1 ADC3_4_EXTERNALTRIG_T8_CC1
+#define ADC_EXTERNALTRIGCONV_EXT_IT2 ADC3_4_EXTERNALTRIG_EXT_IT2
+
+/*!< External triggers of regular group for ADC1&ADC2, ADC3&ADC4 */
+/* Note: Triggers affected to group ADC1_2 by default, redirected to group */
+/* ADC3_4 by driver when needed. */
+#define ADC_EXTERNALTRIGCONV_T1_CC3 ADC1_2_EXTERNALTRIG_T1_CC3
+#define ADC_EXTERNALTRIGCONV_T1_TRGO ADC1_2_EXTERNALTRIG_T1_TRGO
+#define ADC_EXTERNALTRIGCONV_T1_TRGO2 ADC1_2_EXTERNALTRIG_T1_TRGO2
+#define ADC_EXTERNALTRIGCONV_T2_TRGO ADC1_2_EXTERNALTRIG_T2_TRGO
+#define ADC_EXTERNALTRIGCONV_T3_TRGO ADC1_2_EXTERNALTRIG_T3_TRGO
+#define ADC_EXTERNALTRIGCONV_T4_TRGO ADC1_2_EXTERNALTRIG_T4_TRGO
+#define ADC_EXTERNALTRIGCONV_T8_TRGO ADC1_2_EXTERNALTRIG_T8_TRGO
+#define ADC_EXTERNALTRIGCONV_T8_TRGO2 ADC1_2_EXTERNALTRIG_T8_TRGO2
+#define ADC_EXTERNALTRIGCONV_T15_TRGO ADC1_2_EXTERNALTRIG_T15_TRGO
+
+#define ADC_SOFTWARE_START ((uint32_t)0x00000001)
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+/* ADC external triggers specific to device STM303xE: mask to differentiate */
+/* standard triggers from specific timer 20, needed for reallocation of */
+/* triggers common to ADC1&2/ADC3&4 and to avoind mixing with standard */
+/* triggers without remap. */
+#define ADC_EXTERNALTRIGCONV_T20_MASK 0x1000
+
+/*!< List of external triggers specific to device STM303xE: using Timer20 */
+/* with ADC trigger input remap. */
+/* To remap ADC trigger from other timers/ExtLine to timer20: use macro */
+/* " __HAL_REMAPADCTRIGGER_ENABLE(...) " with parameters described below: */
+
+/*!< External triggers of regular group for ADC1&ADC2 only, specific to */
+/* device STM303xE: : using Timer20 with ADC trigger input remap */
+#define ADC_EXTERNALTRIGCONV_T20_CC2 ADC_EXTERNALTRIGCONV_T6_TRGO /*!< Remap trigger using macro __HAL_REMAPADCTRIGGER_ENABLE(HAL_REMAPADCTRIGGER_ADC12_EXT13) */
+#define ADC_EXTERNALTRIGCONV_T20_CC3 ADC_EXTERNALTRIGCONV_T3_CC4 /*!< Remap trigger using macro __HAL_REMAPADCTRIGGER_ENABLE(HAL_REMAPADCTRIGGER_ADC12_EXT15) */
+
+/*!< External triggers of regular group for ADC3&ADC4 only, specific to */
+/* device STM303xE: : using Timer20 with ADC trigger input remap */
+/* None */
+
+/*!< External triggers of regular group for ADC1&ADC2, ADC3&ADC4, specific to */
+/* device STM303xE: : using Timer20 with ADC trigger input remap */
+/* Note: Triggers affected to group ADC1_2 by default, redirected to group */
+/* ADC3_4 by driver when needed. */
+#define ADC_EXTERNALTRIGCONV_T20_CC1 (ADC_EXTERNALTRIGCONV_T4_CC4 | ADC_EXTERNALTRIGCONV_T20_MASK) /*!< For ADC1&ADC2: Remap trigger using macro __HAL_REMAPADCTRIGGER_ENABLE(HAL_REMAPADCTRIGGER_ADC12_EXT5) */
+ /*!< For ADC3&ADC4: Remap trigger using macro __HAL_REMAPADCTRIGGER_ENABLE(HAL_REMAPADCTRIGGER_ADC34_EXT15) */
+#define ADC_EXTERNALTRIGCONV_T20_TRGO (ADC_EXTERNALTRIGCONV_T1_CC3 | ADC_EXTERNALTRIGCONV_T20_MASK) /*!< For ADC1&ADC2: Remap trigger using macro __HAL_REMAPADCTRIGGER_ENABLE(HAL_REMAPADCTRIGGER_ADC12_EXT2) */
+ /*!< For ADC3&ADC4: Remap trigger using macro __HAL_REMAPADCTRIGGER_ENABLE(HAL_REMAPADCTRIGGER_ADC34_EXT5) */
+#define ADC_EXTERNALTRIGCONV_T20_TRGO2 (ADC_EXTERNALTRIGCONV_T2_CC2 | ADC_EXTERNALTRIGCONV_T20_MASK) /*!< For ADC1&ADC2: Remap trigger using macro __HAL_REMAPADCTRIGGER_ENABLE(HAL_REMAPADCTRIGGER_ADC12_EXT3) */
+ /*!< For ADC3&ADC4: Remap trigger using macro __HAL_REMAPADCTRIGGER_ENABLE(HAL_REMAPADCTRIGGER_ADC34_EXT6) */
+#endif /* STM32F303xE || STM32F398xx */
+
+#if defined(STM32F303xC) || defined(STM32F358xx)
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T6_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \
+ \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T7_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT2) || \
+ \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T15_TRGO) || \
+ \
+ ((REGTRIG) == ADC_SOFTWARE_START) )
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T6_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \
+ \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T7_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT2) || \
+ \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T15_TRGO) || \
+ \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T20_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T20_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T20_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T20_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T20_TRGO2) || \
+ \
+ ((REGTRIG) == ADC_SOFTWARE_START) )
+#endif /* STM32F303xE || STM32F398xx */
+
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xE) || \
+ defined(STM32F302xC)
+/*!< List of external triggers with generic trigger name, independently of */
+/* ADC target (caution: applies to other ADCs sharing the same common group), */
+/* sorted by trigger name: */
+
+/*!< External triggers of regular group for ADC1&ADC2 */
+#define ADC_EXTERNALTRIGCONV_T1_CC1 ADC1_2_EXTERNALTRIG_T1_CC1
+#define ADC_EXTERNALTRIGCONV_T1_CC2 ADC1_2_EXTERNALTRIG_T1_CC2
+#define ADC_EXTERNALTRIGCONV_T1_CC3 ADC1_2_EXTERNALTRIG_T1_CC3
+#define ADC_EXTERNALTRIGCONV_T1_TRGO ADC1_2_EXTERNALTRIG_T1_TRGO
+#define ADC_EXTERNALTRIGCONV_T1_TRGO2 ADC1_2_EXTERNALTRIG_T1_TRGO2
+#define ADC_EXTERNALTRIGCONV_T2_CC2 ADC1_2_EXTERNALTRIG_T2_CC2
+#define ADC_EXTERNALTRIGCONV_T2_TRGO ADC1_2_EXTERNALTRIG_T2_TRGO
+#define ADC_EXTERNALTRIGCONV_T3_CC4 ADC1_2_EXTERNALTRIG_T3_CC4
+#define ADC_EXTERNALTRIGCONV_T3_TRGO ADC1_2_EXTERNALTRIG_T3_TRGO
+#define ADC_EXTERNALTRIGCONV_T4_CC4 ADC1_2_EXTERNALTRIG_T4_CC4
+#define ADC_EXTERNALTRIGCONV_T4_TRGO ADC1_2_EXTERNALTRIG_T4_TRGO
+#define ADC_EXTERNALTRIGCONV_T6_TRGO ADC1_2_EXTERNALTRIG_T6_TRGO
+#define ADC_EXTERNALTRIGCONV_T15_TRGO ADC1_2_EXTERNALTRIG_T15_TRGO
+#define ADC_EXTERNALTRIGCONV_EXT_IT11 ADC1_2_EXTERNALTRIG_EXT_IT11
+#define ADC_SOFTWARE_START ((uint32_t)0x00000001)
+
+#if defined(STM32F302xE)
+/* ADC external triggers specific to device STM302xE: mask to differentiate */
+/* standard triggers from specific timer 20, needed for reallocation of */
+/* triggers common to ADC1&2 and to avoind mixing with standard */
+/* triggers without remap. */
+#define ADC_EXTERNALTRIGCONV_T20_MASK 0x1000
+
+/*!< List of external triggers specific to device STM302xE: using Timer20 */
+/* with ADC trigger input remap. */
+/* To remap ADC trigger from other timers/ExtLine to timer20: use macro */
+/* " __HAL_REMAPADCTRIGGER_ENABLE(...) " with parameters described below: */
+
+/*!< External triggers of regular group for ADC1&ADC2 only, specific to */
+/* device STM302xE: : using Timer20 with ADC trigger input remap */
+#define ADC_EXTERNALTRIGCONV_T20_CC2 ADC_EXTERNALTRIGCONV_T6_TRGO /*!< Remap trigger using macro __HAL_REMAPADCTRIGGER_ENABLE(HAL_REMAPADCTRIGGER_ADC12_EXT13) */
+#define ADC_EXTERNALTRIGCONV_T20_CC3 ADC_EXTERNALTRIGCONV_T3_CC4 /*!< Remap trigger using macro __HAL_REMAPADCTRIGGER_ENABLE(HAL_REMAPADCTRIGGER_ADC12_EXT15) */
+#endif /* STM32F302xE */
+
+#if defined(STM32F302xE)
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T6_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T15_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC4) || \
+ \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T20_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T20_CC3) || \
+ \
+ ((REGTRIG) == ADC_SOFTWARE_START) )
+#endif /* STM32F302xE */
+
+#if defined(STM32F302xC)
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T6_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T15_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC4) || \
+ \
+ ((REGTRIG) == ADC_SOFTWARE_START) )
+#endif /* STM32F302xC */
+
+#endif /* STM32F302xE || */
+ /* STM32F302xC */
+
+#if defined(STM32F303x8) || defined(STM32F328xx)
+/*!< List of external triggers with generic trigger name, independently of */
+/* ADC target (caution: applies to other ADCs sharing the same common group), */
+/* sorted by trigger name: */
+
+/*!< External triggers of regular group for ADC1&ADC2 */
+#define ADC_EXTERNALTRIGCONV_T1_CC1 ADC1_2_EXTERNALTRIG_T1_CC1
+#define ADC_EXTERNALTRIGCONV_T1_CC2 ADC1_2_EXTERNALTRIG_T1_CC2
+#define ADC_EXTERNALTRIGCONV_T1_CC3 ADC1_2_EXTERNALTRIG_T1_CC3
+#define ADC_EXTERNALTRIGCONV_T1_TRGO ADC1_2_EXTERNALTRIG_T1_TRGO
+#define ADC_EXTERNALTRIGCONV_T1_TRGO2 ADC1_2_EXTERNALTRIG_T1_TRGO2
+#define ADC_EXTERNALTRIGCONV_T2_CC2 ADC1_2_EXTERNALTRIG_T2_CC2
+#define ADC_EXTERNALTRIGCONV_T2_TRGO ADC1_2_EXTERNALTRIG_T2_TRGO
+#define ADC_EXTERNALTRIGCONV_T3_CC4 ADC1_2_EXTERNALTRIG_T3_CC4
+#define ADC_EXTERNALTRIGCONV_T3_TRGO ADC1_2_EXTERNALTRIG_T3_TRGO
+#define ADC_EXTERNALTRIGCONV_T4_CC4 ADC1_2_EXTERNALTRIG_T4_CC4
+#define ADC_EXTERNALTRIGCONV_T4_TRGO ADC1_2_EXTERNALTRIG_T4_TRGO
+#define ADC_EXTERNALTRIGCONV_T8_TRGO ADC1_2_EXTERNALTRIG_T8_TRGO
+#define ADC_EXTERNALTRIGCONV_T8_TRGO2 ADC1_2_EXTERNALTRIG_T8_TRGO2
+#define ADC_EXTERNALTRIGCONV_T6_TRGO ADC1_2_EXTERNALTRIG_T6_TRGO
+#define ADC_EXTERNALTRIGCONV_T15_TRGO ADC1_2_EXTERNALTRIG_T15_TRGO
+#define ADC_EXTERNALTRIGCONV_EXT_IT11 ADC1_2_EXTERNALTRIG_EXT_IT11
+#define ADC_SOFTWARE_START ((uint32_t)0x00000001)
+
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T6_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T15_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC4) || \
+ \
+ ((REGTRIG) == ADC_SOFTWARE_START) )
+#endif /* STM32F303x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+/*!< List of external triggers with generic trigger name, independently of */
+/* ADC target (caution: applies to other ADCs sharing the same common group), */
+/* sorted by trigger name: */
+
+/*!< External triggers of regular group for ADC1&ADC2 */
+#define ADC_EXTERNALTRIGCONV_T1_CC1 ADC1_2_EXTERNALTRIG_T1_CC1
+#define ADC_EXTERNALTRIGCONV_T1_CC2 ADC1_2_EXTERNALTRIG_T1_CC2
+#define ADC_EXTERNALTRIGCONV_T1_CC3 ADC1_2_EXTERNALTRIG_T1_CC3
+#define ADC_EXTERNALTRIGCONV_T1_TRGO ADC1_2_EXTERNALTRIG_T1_TRGO
+#define ADC_EXTERNALTRIGCONV_T1_TRGO2 ADC1_2_EXTERNALTRIG_T1_TRGO2
+#define ADC_EXTERNALTRIGCONV_T2_CC2 ADC1_2_EXTERNALTRIG_T2_CC2
+#define ADC_EXTERNALTRIGCONV_T2_TRGO ADC1_2_EXTERNALTRIG_T2_TRGO
+#define ADC_EXTERNALTRIGCONV_T3_CC4 ADC1_2_EXTERNALTRIG_T3_CC4
+#define ADC_EXTERNALTRIGCONV_T3_TRGO ADC1_2_EXTERNALTRIG_T3_TRGO
+#define ADC_EXTERNALTRIGCONV_T6_TRGO ADC1_2_EXTERNALTRIG_T6_TRGO
+#define ADC_EXTERNALTRIGCONV_T15_TRGO ADC1_2_EXTERNALTRIG_T15_TRGO
+#define ADC_EXTERNALTRIGCONVHRTIM_TRG1 ADC1_2_EXTERNALTRIG_HRTIM_TRG1
+#define ADC_EXTERNALTRIGCONVHRTIM_TRG3 ADC1_2_EXTERNALTRIG_HRTIM_TRG3
+#define ADC_EXTERNALTRIGCONV_EXT_IT11 ADC1_2_EXTERNALTRIG_EXT_IT11
+#define ADC_SOFTWARE_START ((uint32_t)0x00000001)
+
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONVHRTIM_TRG1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONVHRTIM_TRG3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T6_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T15_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC4) || \
+ \
+ ((REGTRIG) == ADC_SOFTWARE_START) )
+#endif /* STM32F334x8 */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/* List of external triggers with generic trigger name, sorted by trigger */
+/* name: */
+
+/* External triggers of regular group for ADC1 */
+#define ADC_EXTERNALTRIGCONV_T1_CC1 ADC1_EXTERNALTRIG_T1_CC1
+#define ADC_EXTERNALTRIGCONV_T1_CC2 ADC1_EXTERNALTRIG_T1_CC2
+#define ADC_EXTERNALTRIGCONV_T1_CC3 ADC1_EXTERNALTRIG_T1_CC3
+#define ADC_EXTERNALTRIGCONV_EXT_IT11 ADC1_EXTERNALTRIG_EXT_IT11
+#define ADC_EXTERNALTRIGCONV_T1_TRGO ADC1_EXTERNALTRIG_T1_TRGO
+#define ADC_EXTERNALTRIGCONV_T1_TRGO2 ADC1_EXTERNALTRIG_T1_TRGO2
+#define ADC_EXTERNALTRIGCONV_T2_TRGO ADC1_EXTERNALTRIG_T2_TRGO
+#define ADC_EXTERNALTRIGCONV_T6_TRGO ADC1_EXTERNALTRIG_T6_TRGO
+#define ADC_EXTERNALTRIGCONV_T15_TRGO ADC1_EXTERNALTRIG_T15_TRGO
+#define ADC_SOFTWARE_START ((uint32_t)0x00000001)
+
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_TRGO2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T6_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T15_TRGO) || \
+ ((REGTRIG) == ADC_SOFTWARE_START) )
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_Internal_HAL_driver_Ext_trig_src_Regular ADC Extended External trigger selection for regular group (Used Internally)
+ * @{
+ */
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx)
+/* List of external triggers for common groups ADC1&ADC2 and/or ADC3&ADC4: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+
+/* External triggers of regular group for ADC1 & ADC2 */
+#define ADC1_2_EXTERNALTRIG_T1_CC1 ((uint32_t)0x00000000)
+#define ADC1_2_EXTERNALTRIG_T1_CC2 ((uint32_t)ADC_CFGR_EXTSEL_0)
+#define ADC1_2_EXTERNALTRIG_T1_CC3 ((uint32_t)ADC_CFGR_EXTSEL_1)
+#define ADC1_2_EXTERNALTRIG_T2_CC2 ((uint32_t)(ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T3_TRGO ((uint32_t)ADC_CFGR_EXTSEL_2)
+#define ADC1_2_EXTERNALTRIG_T4_CC4 ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_EXT_IT11 ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1))
+#define ADC1_2_EXTERNALTRIG_T8_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T8_TRGO2 ((uint32_t) ADC_CFGR_EXTSEL_3)
+#define ADC1_2_EXTERNALTRIG_T1_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T1_TRGO2 ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1))
+#define ADC1_2_EXTERNALTRIG_T2_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T4_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2))
+#define ADC1_2_EXTERNALTRIG_T6_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T15_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1))
+#define ADC1_2_EXTERNALTRIG_T3_CC4 ((uint32_t)ADC_CFGR_EXTSEL)
+
+/* External triggers of regular group for ADC3 & ADC4 */
+#define ADC3_4_EXTERNALTRIG_T3_CC1 ((uint32_t)0x00000000)
+#define ADC3_4_EXTERNALTRIG_T2_CC3 ((uint32_t)ADC_CFGR_EXTSEL_0)
+#define ADC3_4_EXTERNALTRIG_T1_CC3 ((uint32_t)ADC_CFGR_EXTSEL_1)
+#define ADC3_4_EXTERNALTRIG_T8_CC1 ((uint32_t)(ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC3_4_EXTERNALTRIG_T8_TRGO ((uint32_t)ADC_CFGR_EXTSEL_2)
+#define ADC3_4_EXTERNALTRIG_EXT_IT2 ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_0))
+#define ADC3_4_EXTERNALTRIG_T4_CC1 ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1))
+#define ADC3_4_EXTERNALTRIG_T2_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC3_4_EXTERNALTRIG_T8_TRGO2 ((uint32_t)ADC_CFGR_EXTSEL_3)
+#define ADC3_4_EXTERNALTRIG_T1_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_0))
+#define ADC3_4_EXTERNALTRIG_T1_TRGO2 ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1))
+#define ADC3_4_EXTERNALTRIG_T3_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC3_4_EXTERNALTRIG_T4_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2))
+#define ADC3_4_EXTERNALTRIG_T7_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_0))
+#define ADC3_4_EXTERNALTRIG_T15_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1))
+#define ADC3_4_EXTERNALTRIG_T2_CC1 ((uint32_t)ADC_CFGR_EXTSEL)
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xE) || \
+ defined(STM32F302xC)
+/* List of external triggers of common group ADC1&ADC2: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+#define ADC1_2_EXTERNALTRIG_T1_CC1 ((uint32_t)0x00000000)
+#define ADC1_2_EXTERNALTRIG_T1_CC2 ((uint32_t)ADC_CFGR_EXTSEL_0)
+#define ADC1_2_EXTERNALTRIG_T1_CC3 ((uint32_t)ADC_CFGR_EXTSEL_1)
+#define ADC1_2_EXTERNALTRIG_T1_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T1_TRGO2 ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1))
+#define ADC1_2_EXTERNALTRIG_T2_CC2 ((uint32_t)(ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T2_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T3_CC4 ((uint32_t)ADC_CFGR_EXTSEL)
+#define ADC1_2_EXTERNALTRIG_T3_TRGO ((uint32_t)ADC_CFGR_EXTSEL_2)
+#define ADC1_2_EXTERNALTRIG_T4_CC4 ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T4_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2))
+#define ADC1_2_EXTERNALTRIG_T6_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T15_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1))
+#define ADC1_2_EXTERNALTRIG_EXT_IT11 ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1))
+#endif /* STM32F302xE || */
+ /* STM32F302xC */
+
+#if defined(STM32F303x8) || defined(STM32F328xx)
+/* List of external triggers of common group ADC1&ADC2: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+#define ADC1_2_EXTERNALTRIG_T1_CC1 ((uint32_t)0x00000000)
+#define ADC1_2_EXTERNALTRIG_T1_CC2 ((uint32_t)ADC_CFGR_EXTSEL_0)
+#define ADC1_2_EXTERNALTRIG_T1_CC3 ((uint32_t)ADC_CFGR_EXTSEL_1)
+#define ADC1_2_EXTERNALTRIG_T2_CC2 ((uint32_t)(ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T3_TRGO ((uint32_t)ADC_CFGR_EXTSEL_2)
+#define ADC1_2_EXTERNALTRIG_T4_CC4 ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_EXT_IT11 ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1))
+#define ADC1_2_EXTERNALTRIG_T8_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T8_TRGO2 ((uint32_t) ADC_CFGR_EXTSEL_3)
+#define ADC1_2_EXTERNALTRIG_T1_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T1_TRGO2 ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1))
+#define ADC1_2_EXTERNALTRIG_T2_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T4_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2))
+#define ADC1_2_EXTERNALTRIG_T6_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T15_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1))
+#define ADC1_2_EXTERNALTRIG_T3_CC4 ((uint32_t)ADC_CFGR_EXTSEL)
+#endif /* STM32F303x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+/* List of external triggers of common group ADC1&ADC2: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+#define ADC1_2_EXTERNALTRIG_T1_CC1 ((uint32_t)0x00000000)
+#define ADC1_2_EXTERNALTRIG_T1_CC2 ((uint32_t)ADC_CFGR_EXTSEL_0)
+#define ADC1_2_EXTERNALTRIG_T1_CC3 ((uint32_t)ADC_CFGR_EXTSEL_1)
+#define ADC1_2_EXTERNALTRIG_T2_CC2 ((uint32_t)(ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T3_TRGO ((uint32_t)ADC_CFGR_EXTSEL_2)
+#define ADC1_2_EXTERNALTRIG_EXT_IT11 ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1))
+#define ADC1_2_EXTERNALTRIG_HRTIM_TRG1 ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_HRTIM_TRG3 ((uint32_t) ADC_CFGR_EXTSEL_3)
+#define ADC1_2_EXTERNALTRIG_T1_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T1_TRGO2 ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1))
+#define ADC1_2_EXTERNALTRIG_T2_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T6_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_0))
+#define ADC1_2_EXTERNALTRIG_T15_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1))
+#define ADC1_2_EXTERNALTRIG_T3_CC4 ((uint32_t)ADC_CFGR_EXTSEL)
+#endif /* STM32F334x8 */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/* List of external triggers of regular group for ADC1: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+#define ADC1_EXTERNALTRIG_T1_CC1 ((uint32_t)0x00000000)
+#define ADC1_EXTERNALTRIG_T1_CC2 ((uint32_t)ADC_CFGR_EXTSEL_0)
+#define ADC1_EXTERNALTRIG_T1_CC3 ((uint32_t)ADC_CFGR_EXTSEL_1)
+#define ADC1_EXTERNALTRIG_EXT_IT11 ((uint32_t)(ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1))
+#define ADC1_EXTERNALTRIG_T1_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_0))
+#define ADC1_EXTERNALTRIG_T1_TRGO2 ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1))
+#define ADC1_EXTERNALTRIG_T2_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_1 | ADC_CFGR_EXTSEL_0))
+#define ADC1_EXTERNALTRIG_T6_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_0))
+#define ADC1_EXTERNALTRIG_T15_TRGO ((uint32_t)(ADC_CFGR_EXTSEL_3 | ADC_CFGR_EXTSEL_2 | ADC_CFGR_EXTSEL_1))
+#define ADC_SOFTWARE_START ((uint32_t)0x00000001)
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+/**
+ * @}
+ */
+
+
+/** @defgroup ADCEx_EOCSelection ADC Extended End of Regular Sequence/Conversion
+ * @{
+ */
+#define EOC_SINGLE_CONV ((uint32_t) ADC_ISR_EOC)
+#define EOC_SEQ_CONV ((uint32_t) ADC_ISR_EOS)
+#define EOC_SINGLE_SEQ_CONV ((uint32_t)(ADC_ISR_EOC | ADC_ISR_EOS)) /*!< reserved for future use */
+
+#define IS_ADC_EOC_SELECTION(EOC_SELECTION) (((EOC_SELECTION) == EOC_SINGLE_CONV) || \
+ ((EOC_SELECTION) == EOC_SEQ_CONV) || \
+ ((EOC_SELECTION) == EOC_SINGLE_SEQ_CONV) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_Overrun ADC Extended overrun
+ * @{
+ */
+#define OVR_DATA_OVERWRITTEN ((uint32_t)0x00000000) /*!< Default setting, to be used for compatibility with other STM32 devices */
+#define OVR_DATA_PRESERVED ((uint32_t)0x00000001)
+
+#define IS_ADC_OVERRUN(OVR) (((OVR) == OVR_DATA_PRESERVED) || \
+ ((OVR) == OVR_DATA_OVERWRITTEN) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_channels ADC Extended Channels
+ * @{
+ */
+/* Note: Depending on devices, some channels may not be available on package */
+/* pins. Refer to device datasheet for channels availability. */
+#define ADC_CHANNEL_1 ((uint32_t)(ADC_SQR3_SQ10_0))
+#define ADC_CHANNEL_2 ((uint32_t)(ADC_SQR3_SQ10_1))
+#define ADC_CHANNEL_3 ((uint32_t)(ADC_SQR3_SQ10_1 | ADC_SQR3_SQ10_0))
+#define ADC_CHANNEL_4 ((uint32_t)(ADC_SQR3_SQ10_2))
+#define ADC_CHANNEL_5 ((uint32_t)(ADC_SQR3_SQ10_2 | ADC_SQR3_SQ10_0))
+#define ADC_CHANNEL_6 ((uint32_t)(ADC_SQR3_SQ10_2 | ADC_SQR3_SQ10_1))
+#define ADC_CHANNEL_7 ((uint32_t)(ADC_SQR3_SQ10_2 | ADC_SQR3_SQ10_1 | ADC_SQR3_SQ10_0))
+#define ADC_CHANNEL_8 ((uint32_t)(ADC_SQR3_SQ10_3))
+#define ADC_CHANNEL_9 ((uint32_t)(ADC_SQR3_SQ10_3 | ADC_SQR3_SQ10_0))
+#define ADC_CHANNEL_10 ((uint32_t)(ADC_SQR3_SQ10_3 | ADC_SQR3_SQ10_1))
+#define ADC_CHANNEL_11 ((uint32_t)(ADC_SQR3_SQ10_3 | ADC_SQR3_SQ10_1 | ADC_SQR3_SQ10_0))
+#define ADC_CHANNEL_12 ((uint32_t)(ADC_SQR3_SQ10_3 | ADC_SQR3_SQ10_2))
+#define ADC_CHANNEL_13 ((uint32_t)(ADC_SQR3_SQ10_3 | ADC_SQR3_SQ10_2 | ADC_SQR3_SQ10_0))
+#define ADC_CHANNEL_14 ((uint32_t)(ADC_SQR3_SQ10_3 | ADC_SQR3_SQ10_2 | ADC_SQR3_SQ10_1))
+#define ADC_CHANNEL_15 ((uint32_t)(ADC_SQR3_SQ10_3 | ADC_SQR3_SQ10_2 | ADC_SQR3_SQ10_1 | ADC_SQR3_SQ10_0))
+#define ADC_CHANNEL_16 ((uint32_t)(ADC_SQR3_SQ10_4))
+#define ADC_CHANNEL_17 ((uint32_t)(ADC_SQR3_SQ10_4 | ADC_SQR3_SQ10_0))
+#define ADC_CHANNEL_18 ((uint32_t)(ADC_SQR3_SQ10_4 | ADC_SQR3_SQ10_1))
+
+/* Note: Vopamp1, TempSensor and Vbat internal channels available on ADC1 only */
+#define ADC_CHANNEL_VOPAMP1 ADC_CHANNEL_15
+#define ADC_CHANNEL_TEMPSENSOR ADC_CHANNEL_16
+#define ADC_CHANNEL_VBAT ADC_CHANNEL_17
+
+/* Note: Vopamp2/3/4 internal channels available on ADC2/3/4 respectively */
+#define ADC_CHANNEL_VOPAMP2 ADC_CHANNEL_17
+#define ADC_CHANNEL_VOPAMP3 ADC_CHANNEL_17
+#define ADC_CHANNEL_VOPAMP4 ADC_CHANNEL_17
+
+/* Note: VrefInt internal channels available on all ADCs, but only */
+/* one ADC is allowed to be connected to VrefInt at the same time. */
+#define ADC_CHANNEL_VREFINT ((uint32_t)ADC_CHANNEL_18)
+
+#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_CHANNEL_1) || \
+ ((CHANNEL) == ADC_CHANNEL_2) || \
+ ((CHANNEL) == ADC_CHANNEL_3) || \
+ ((CHANNEL) == ADC_CHANNEL_4) || \
+ ((CHANNEL) == ADC_CHANNEL_5) || \
+ ((CHANNEL) == ADC_CHANNEL_6) || \
+ ((CHANNEL) == ADC_CHANNEL_7) || \
+ ((CHANNEL) == ADC_CHANNEL_8) || \
+ ((CHANNEL) == ADC_CHANNEL_9) || \
+ ((CHANNEL) == ADC_CHANNEL_10) || \
+ ((CHANNEL) == ADC_CHANNEL_11) || \
+ ((CHANNEL) == ADC_CHANNEL_12) || \
+ ((CHANNEL) == ADC_CHANNEL_13) || \
+ ((CHANNEL) == ADC_CHANNEL_14) || \
+ ((CHANNEL) == ADC_CHANNEL_15) || \
+ ((CHANNEL) == ADC_CHANNEL_TEMPSENSOR) || \
+ ((CHANNEL) == ADC_CHANNEL_VBAT) || \
+ ((CHANNEL) == ADC_CHANNEL_VREFINT) || \
+ ((CHANNEL) == ADC_CHANNEL_VOPAMP1) || \
+ ((CHANNEL) == ADC_CHANNEL_VOPAMP2) || \
+ ((CHANNEL) == ADC_CHANNEL_VOPAMP3) || \
+ ((CHANNEL) == ADC_CHANNEL_VOPAMP4) )
+
+#define IS_ADC_DIFF_CHANNEL(CHANNEL) (((CHANNEL) == ADC_CHANNEL_1) || \
+ ((CHANNEL) == ADC_CHANNEL_2) || \
+ ((CHANNEL) == ADC_CHANNEL_3) || \
+ ((CHANNEL) == ADC_CHANNEL_4) || \
+ ((CHANNEL) == ADC_CHANNEL_5) || \
+ ((CHANNEL) == ADC_CHANNEL_6) || \
+ ((CHANNEL) == ADC_CHANNEL_7) || \
+ ((CHANNEL) == ADC_CHANNEL_8) || \
+ ((CHANNEL) == ADC_CHANNEL_9) || \
+ ((CHANNEL) == ADC_CHANNEL_10) || \
+ ((CHANNEL) == ADC_CHANNEL_11) || \
+ ((CHANNEL) == ADC_CHANNEL_12) || \
+ ((CHANNEL) == ADC_CHANNEL_13) || \
+ ((CHANNEL) == ADC_CHANNEL_14) )
+
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_sampling_times ADC Extended Sampling Times
+ * @{
+ */
+#define ADC_SAMPLETIME_1CYCLE_5 ((uint32_t)0x00000000) /*!< Sampling time 1.5 ADC clock cycle */
+#define ADC_SAMPLETIME_2CYCLES_5 ((uint32_t)ADC_SMPR2_SMP10_0) /*!< Sampling time 2.5 ADC clock cycles */
+#define ADC_SAMPLETIME_4CYCLES_5 ((uint32_t)ADC_SMPR2_SMP10_1) /*!< Sampling time 4.5 ADC clock cycles */
+#define ADC_SAMPLETIME_7CYCLES_5 ((uint32_t)(ADC_SMPR2_SMP10_1 | ADC_SMPR2_SMP10_0)) /*!< Sampling time 7.5 ADC clock cycles */
+#define ADC_SAMPLETIME_19CYCLES_5 ((uint32_t)ADC_SMPR2_SMP10_2) /*!< Sampling time 19.5 ADC clock cycles */
+#define ADC_SAMPLETIME_61CYCLES_5 ((uint32_t)(ADC_SMPR2_SMP10_2 | ADC_SMPR2_SMP10_0)) /*!< Sampling time 61.5 ADC clock cycles */
+#define ADC_SAMPLETIME_181CYCLES_5 ((uint32_t)(ADC_SMPR2_SMP10_2 | ADC_SMPR2_SMP10_1)) /*!< Sampling time 181.5 ADC clock cycles */
+#define ADC_SAMPLETIME_601CYCLES_5 ((uint32_t)ADC_SMPR2_SMP10) /*!< Sampling time 601.5 ADC clock cycles */
+
+#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SAMPLETIME_1CYCLE_5) || \
+ ((TIME) == ADC_SAMPLETIME_2CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_4CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_7CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_19CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_61CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_181CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_601CYCLES_5) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_SingleDifferential ADC Extended Single-ended/Differential input mode
+ * @{
+ */
+#define ADC_SINGLE_ENDED ((uint32_t)0x00000000)
+#define ADC_DIFFERENTIAL_ENDED ((uint32_t)0x00000001)
+
+#define IS_ADC_SINGLE_DIFFERENTIAL(SING_DIFF) (((SING_DIFF) == ADC_SINGLE_ENDED) || \
+ ((SING_DIFF) == ADC_DIFFERENTIAL_ENDED) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_OffsetNumber ADC Extended Offset Number
+ * @{
+ */
+#define ADC_OFFSET_NONE ((uint32_t)0x00)
+#define ADC_OFFSET_1 ((uint32_t)0x01)
+#define ADC_OFFSET_2 ((uint32_t)0x02)
+#define ADC_OFFSET_3 ((uint32_t)0x03)
+#define ADC_OFFSET_4 ((uint32_t)0x04)
+
+#define IS_ADC_OFFSET_NUMBER(OFFSET_NUMBER) (((OFFSET_NUMBER) == ADC_OFFSET_NONE) || \
+ ((OFFSET_NUMBER) == ADC_OFFSET_1) || \
+ ((OFFSET_NUMBER) == ADC_OFFSET_2) || \
+ ((OFFSET_NUMBER) == ADC_OFFSET_3) || \
+ ((OFFSET_NUMBER) == ADC_OFFSET_4) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_regular_rank ADC Extended Regular Channel Rank
+ * @{
+ */
+#define ADC_REGULAR_RANK_1 ((uint32_t)0x00000001)
+#define ADC_REGULAR_RANK_2 ((uint32_t)0x00000002)
+#define ADC_REGULAR_RANK_3 ((uint32_t)0x00000003)
+#define ADC_REGULAR_RANK_4 ((uint32_t)0x00000004)
+#define ADC_REGULAR_RANK_5 ((uint32_t)0x00000005)
+#define ADC_REGULAR_RANK_6 ((uint32_t)0x00000006)
+#define ADC_REGULAR_RANK_7 ((uint32_t)0x00000007)
+#define ADC_REGULAR_RANK_8 ((uint32_t)0x00000008)
+#define ADC_REGULAR_RANK_9 ((uint32_t)0x00000009)
+#define ADC_REGULAR_RANK_10 ((uint32_t)0x0000000A)
+#define ADC_REGULAR_RANK_11 ((uint32_t)0x0000000B)
+#define ADC_REGULAR_RANK_12 ((uint32_t)0x0000000C)
+#define ADC_REGULAR_RANK_13 ((uint32_t)0x0000000D)
+#define ADC_REGULAR_RANK_14 ((uint32_t)0x0000000E)
+#define ADC_REGULAR_RANK_15 ((uint32_t)0x0000000F)
+#define ADC_REGULAR_RANK_16 ((uint32_t)0x00000010)
+
+#define IS_ADC_REGULAR_RANK(CHANNEL) (((CHANNEL) == ADC_REGULAR_RANK_1 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_2 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_3 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_4 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_5 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_6 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_7 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_8 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_9 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_10) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_11) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_12) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_13) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_14) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_15) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_16) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_injected_rank ADC Extended Injected Channel Rank
+ * @{
+ */
+#define ADC_INJECTED_RANK_1 ((uint32_t)0x00000001)
+#define ADC_INJECTED_RANK_2 ((uint32_t)0x00000002)
+#define ADC_INJECTED_RANK_3 ((uint32_t)0x00000003)
+#define ADC_INJECTED_RANK_4 ((uint32_t)0x00000004)
+
+#define IS_ADC_INJECTED_RANK(CHANNEL) (((CHANNEL) == ADC_INJECTED_RANK_1) || \
+ ((CHANNEL) == ADC_INJECTED_RANK_2) || \
+ ((CHANNEL) == ADC_INJECTED_RANK_3) || \
+ ((CHANNEL) == ADC_INJECTED_RANK_4) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_edge_Injected External Trigger Edge of Injected Group
+ * @{
+ */
+#define ADC_EXTERNALTRIGINJECCONV_EDGE_NONE ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGINJECCONV_EDGE_RISING ((uint32_t)ADC_JSQR_JEXTEN_0)
+#define ADC_EXTERNALTRIGINJECCONV_EDGE_FALLING ((uint32_t)ADC_JSQR_JEXTEN_1)
+#define ADC_EXTERNALTRIGINJECCONV_EDGE_RISINGFALLING ((uint32_t)ADC_JSQR_JEXTEN)
+
+#define IS_ADC_EXTTRIGINJEC_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_NONE) || \
+ ((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISING) || \
+ ((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_FALLING) || \
+ ((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISINGFALLING) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_source_Injected External Trigger Source of Injected Group
+ * @{
+ */
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx)
+/* List of external triggers with generic trigger name, independently of ADC */
+/* target (caution: applies to other ADCs sharing the same common group), */
+/* sorted by trigger name: */
+
+/* External triggers of injected group for ADC1&ADC2 only */
+#define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ADC1_2_EXTERNALTRIGINJEC_T2_CC1
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC1 ADC1_2_EXTERNALTRIGINJEC_T3_CC1
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC3 ADC1_2_EXTERNALTRIGINJEC_T3_CC3
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ADC1_2_EXTERNALTRIGINJEC_T3_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T6_TRGO ADC1_2_EXTERNALTRIGINJEC_T6_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ADC1_2_EXTERNALTRIGINJEC_EXT_IT15
+
+/* External triggers of injected group for ADC3&ADC4 only */
+#define ADC_EXTERNALTRIGINJECCONV_T1_CC3 ADC3_4_EXTERNALTRIGINJEC_T1_CC3
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC3 ADC3_4_EXTERNALTRIGINJEC_T4_CC3
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC4 ADC3_4_EXTERNALTRIGINJEC_T4_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T7_TRGO ADC3_4_EXTERNALTRIGINJEC_T7_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC2 ADC3_4_EXTERNALTRIGINJEC_T8_CC2
+
+/* External triggers of injected group for ADC1&ADC2, ADC3&ADC4 */
+/* Note: Triggers affected to group ADC1_2 by default, redirected to group */
+/* ADC3_4 by driver when needed. */
+#define ADC_EXTERNALTRIGINJECCONV_T1_CC4 ADC1_2_EXTERNALTRIGINJEC_T1_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO ADC1_2_EXTERNALTRIGINJEC_T1_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO2 ADC1_2_EXTERNALTRIGINJEC_T1_TRGO2
+#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ADC1_2_EXTERNALTRIGINJEC_T2_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T3_TRGO ADC1_2_EXTERNALTRIGINJEC_T3_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO ADC1_2_EXTERNALTRIGINJEC_T4_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC4 ADC1_2_EXTERNALTRIGINJEC_T8_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T8_TRGO ADC1_2_EXTERNALTRIGINJEC_T8_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T8_TRGO2 ADC1_2_EXTERNALTRIGINJEC_T8_TRGO2
+#define ADC_EXTERNALTRIGINJECCONV_T15_TRGO ADC1_2_EXTERNALTRIGINJEC_T15_TRGO
+
+#define ADC_INJECTED_SOFTWARE_START ((uint32_t)0x00000001)
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+/*!< List of external triggers specific to device STM303xE: using Timer20 */
+/* with ADC trigger input remap. */
+/* To remap ADC trigger from other timers/ExtLine to timer20: use macro */
+/* " __HAL_REMAPADCTRIGGER_ENABLE(...) " with parameters described below: */
+
+/*!< External triggers of injected group for ADC1&ADC2 only, specific to */
+/* device STM303xE: : using Timer20 with ADC trigger input remap */
+#define ADC_EXTERNALTRIGINJECCONV_T20_CC4 ADC_EXTERNALTRIGINJECCONV_T3_CC1 /*!< Remap trigger using macro __HAL_REMAPADCTRIGGER_ENABLE(HAL_REMAPADCTRIGGER_ADC12_JEXT13) */
+
+/*!< External triggers of injected group for ADC3&ADC4 only, specific to */
+/* device STM303xE: : using Timer20 with ADC trigger input remap */
+#define ADC_EXTERNALTRIGINJECCONV_T20_CC2 ADC_EXTERNALTRIGINJECCONV_T7_TRGO /*!< Remap trigger using macro __HAL_REMAPADCTRIGGER_ENABLE(HAL_REMAPADCTRIGGER_ADC34_JEXT14) */
+
+/*!< External triggers of regular group for ADC1&ADC2, ADC3&ADC4, specific to */
+/* device STM303xE: : using Timer20 with ADC trigger input remap */
+/* Note: Triggers affected to group ADC1_2 by default, redirected to group */
+/* ADC3_4 by driver when needed. */
+#define ADC_EXTERNALTRIGINJECCONV_T20_TRGO (ADC_EXTERNALTRIGINJECCONV_T2_CC1 | ADC_EXTERNALTRIGCONV_T20_MASK) /*!< For ADC1&ADC2: Remap trigger using macro __HAL_REMAPADCTRIGGER_ENABLE(HAL_REMAPADCTRIGGER_ADC12_JEXT3) */
+ /*!< For ADC3&ADC4: Remap trigger using macro __HAL_REMAPADCTRIGGER_ENABLE(HAL_REMAPADCTRIGGER_ADC34_JEXT5) */
+#define ADC_EXTERNALTRIGINJECCONV_T20_TRGO2 (ADC_EXTERNALTRIGINJECCONV_EXT_IT15 | ADC_EXTERNALTRIGCONV_T20_MASK) /*!< For ADC1&ADC2: Remap trigger using macro __HAL_REMAPADCTRIGGER_ENABLE(HAL_REMAPADCTRIGGER_ADC12_JEXT6) */
+ /*!< For ADC3&ADC4: Remap trigger using macro __HAL_REMAPADCTRIGGER_ENABLE(HAL_REMAPADCTRIGGER_ADC34_JEXT11) */
+#endif /* STM32F303xE || STM32F398xx */
+
+#if defined(STM32F303xC) || defined(STM32F358xx)
+#define IS_ADC_EXTTRIGINJEC(INJTRIG) (((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T6_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
+ \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC3) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T7_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC2) || \
+ \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC3) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_TRGO2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T15_TRGO) || \
+ \
+ ((INJTRIG) == ADC_INJECTED_SOFTWARE_START) )
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+#define IS_ADC_EXTTRIGINJEC(INJTRIG) (((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T6_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
+ \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC3) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T7_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC2) || \
+ \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC3) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_TRGO2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T15_TRGO) || \
+ \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T20_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T20_CC2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T20_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T20_TRGO2) || \
+ \
+ ((INJTRIG) == ADC_INJECTED_SOFTWARE_START) )
+#endif /* STM32F303xE || STM32F398xx */
+
+#endif /* STM32F303xC || STM32F303xE || STM32F398xx || STM32F358xx */
+
+#if defined(STM32F302xE) || \
+ defined(STM32F302xC)
+/*!< List of external triggers with generic trigger name, independently of */
+/* ADC target (caution: applies to other ADCs sharing the same common group), */
+/* sorted by trigger name: */
+
+/* External triggers of injected group for ADC1&ADC2 */
+#define ADC_EXTERNALTRIGINJECCONV_T1_CC4 ADC1_2_EXTERNALTRIGINJEC_T1_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO ADC1_2_EXTERNALTRIGINJEC_T1_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO2 ADC1_2_EXTERNALTRIGINJEC_T1_TRGO2
+#define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ADC1_2_EXTERNALTRIGINJEC_T2_CC1
+#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ADC1_2_EXTERNALTRIGINJEC_T2_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC1 ADC1_2_EXTERNALTRIGINJEC_T3_CC1
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC3 ADC1_2_EXTERNALTRIGINJEC_T3_CC3
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ADC1_2_EXTERNALTRIGINJEC_T3_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T3_TRGO ADC1_2_EXTERNALTRIGINJEC_T3_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO ADC1_2_EXTERNALTRIGINJEC_T4_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T6_TRGO ADC1_2_EXTERNALTRIGINJEC_T6_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T15_TRGO ADC1_2_EXTERNALTRIGINJEC_T15_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ADC1_2_EXTERNALTRIGINJEC_EXT_IT15
+
+#define ADC_INJECTED_SOFTWARE_START ((uint32_t)0x00000001)
+
+#if defined(STM32F302xE)
+/*!< List of external triggers specific to device STM302xE: using Timer20 */
+/* with ADC trigger input remap. */
+/* To remap ADC trigger from other timers/ExtLine to timer20: use macro */
+/* " __HAL_REMAPADCTRIGGER_ENABLE(...) " with parameters described below: */
+
+/*!< External triggers of injected group for ADC1&ADC2 only, specific to */
+/* device STM302xE: : using Timer20 with ADC trigger input remap */
+#define ADC_EXTERNALTRIGINJECCONV_T20_CC4 ADC_EXTERNALTRIGINJECCONV_T3_CC1 /*!< Remap trigger using macro __HAL_REMAPADCTRIGGER_ENABLE(HAL_REMAPADCTRIGGER_ADC12_JEXT13) */
+#define ADC_EXTERNALTRIGINJECCONV_T20_TRGO (ADC_EXTERNALTRIGINJECCONV_T2_CC1 | ADC_EXTERNALTRIGCONV_T20_MASK) /*!< For ADC1&ADC2: Remap trigger using macro __HAL_REMAPADCTRIGGER_ENABLE(HAL_REMAPADCTRIGGER_ADC12_JEXT3) */
+#define ADC_EXTERNALTRIGINJECCONV_T20_TRGO2 (ADC_EXTERNALTRIGINJECCONV_EXT_IT15 | ADC_EXTERNALTRIGCONV_T20_MASK) /*!< For ADC1&ADC2: Remap trigger using macro __HAL_REMAPADCTRIGGER_ENABLE(HAL_REMAPADCTRIGGER_ADC12_JEXT6) */
+#endif /* STM32F302xE */
+
+#if defined(STM32F302xE)
+#define IS_ADC_EXTTRIGINJEC(INJTRIG) (((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC3) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T6_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T15_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T20_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T20_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T20_TRGO2) || \
+ ((INJTRIG) == ADC_INJECTED_SOFTWARE_START) )
+#endif /* STM32F302xE */
+
+#if defined(STM32F302xC)
+#define IS_ADC_EXTTRIGINJEC(INJTRIG) (((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC3) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T6_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T15_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
+ ((INJTRIG) == ADC_INJECTED_SOFTWARE_START) )
+#endif /* STM32F302xC */
+
+#endif /* STM32F302xE || */
+ /* STM32F302xC */
+
+#if defined(STM32F303x8) || defined(STM32F328xx)
+/*!< List of external triggers with generic trigger name, independently of */
+/* ADC target (caution: applies to other ADCs sharing the same common group), */
+/* sorted by trigger name: */
+
+/* External triggers of injected group for ADC1&ADC2 */
+#define ADC_EXTERNALTRIGINJECCONV_T1_CC4 ADC1_2_EXTERNALTRIGINJEC_T1_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO ADC1_2_EXTERNALTRIGINJEC_T1_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO2 ADC1_2_EXTERNALTRIGINJEC_T1_TRGO2
+#define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ADC1_2_EXTERNALTRIGINJEC_T2_CC1
+#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ADC1_2_EXTERNALTRIGINJEC_T2_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC1 ADC1_2_EXTERNALTRIGINJEC_T3_CC1
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC3 ADC1_2_EXTERNALTRIGINJEC_T3_CC3
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ADC1_2_EXTERNALTRIGINJEC_T3_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T3_TRGO ADC1_2_EXTERNALTRIGINJEC_T3_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO ADC1_2_EXTERNALTRIGINJEC_T4_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T6_TRGO ADC1_2_EXTERNALTRIGINJEC_T6_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T8_CC4 ADC1_2_EXTERNALTRIGINJEC_T8_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T8_TRGO ADC1_2_EXTERNALTRIGINJEC_T8_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T8_TRGO2 ADC1_2_EXTERNALTRIGINJEC_T8_TRGO2
+#define ADC_EXTERNALTRIGINJECCONV_T15_TRGO ADC1_2_EXTERNALTRIGINJEC_T15_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ADC1_2_EXTERNALTRIGINJEC_EXT_IT15
+
+#define ADC_INJECTED_SOFTWARE_START ((uint32_t)0x00000001)
+
+#define IS_ADC_EXTTRIGINJEC(INJTRIG) (((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_TRGO2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC3) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T6_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T15_TRGO) || \
+ ((INJTRIG) == ADC_INJECTED_SOFTWARE_START) )
+#endif /* STM32F303x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+/*!< List of external triggers with generic trigger name, independently of */
+/* ADC target (caution: applies to other ADCs sharing the same common group), */
+/* sorted by trigger name: */
+
+/* External triggers of injected group for ADC1&ADC2 */
+#define ADC_EXTERNALTRIGINJECCONV_T1_CC4 ADC1_2_EXTERNALTRIGINJEC_T1_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO ADC1_2_EXTERNALTRIGINJEC_T1_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO2 ADC1_2_EXTERNALTRIGINJEC_T1_TRGO2
+#define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ADC1_2_EXTERNALTRIGINJEC_T2_CC1
+#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ADC1_2_EXTERNALTRIGINJEC_T2_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC1 ADC1_2_EXTERNALTRIGINJEC_T3_CC1
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC3 ADC1_2_EXTERNALTRIGINJEC_T3_CC3
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ADC1_2_EXTERNALTRIGINJEC_T3_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T3_TRGO ADC1_2_EXTERNALTRIGINJEC_T3_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T6_TRGO ADC1_2_EXTERNALTRIGINJEC_T6_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T15_TRGO ADC1_2_EXTERNALTRIGINJEC_T15_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_HRTIM_TRG2 ADC1_2_EXTERNALTRIGINJEC_HRTIM_TRG2
+#define ADC_EXTERNALTRIGINJECCONV_HRTIM_TRG4 ADC1_2_EXTERNALTRIGINJEC_HRTIM_TRG4
+#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ADC1_2_EXTERNALTRIGINJEC_EXT_IT15
+
+#define ADC_INJECTED_SOFTWARE_START ((uint32_t)0x00000001)
+
+#define IS_ADC_EXTTRIGINJEC(INJTRIG) (((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_HRTIM_TRG2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_HRTIM_TRG4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC3) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T6_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T15_TRGO) || \
+ ((INJTRIG) == ADC_INJECTED_SOFTWARE_START) )
+#endif /* STM32F334x8 */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/* List of external triggers with generic trigger name, sorted by trigger */
+/* name: */
+
+/* External triggers of injected group for ADC1 */
+#define ADC_EXTERNALTRIGINJECCONV_T1_CC4 ADC1_EXTERNALTRIGINJEC_T1_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO ADC1_EXTERNALTRIGINJEC_T1_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO2 ADC1_EXTERNALTRIGINJEC_T1_TRGO2
+#define ADC_EXTERNALTRIGINJECCONV_T6_TRGO ADC1_EXTERNALTRIGINJEC_T6_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T15_TRGO ADC1_EXTERNALTRIGINJEC_T15_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ADC1_EXTERNALTRIGINJEC_EXT_IT15
+
+#define ADC_INJECTED_SOFTWARE_START ((uint32_t)0x00000001)
+
+#define IS_ADC_EXTTRIGINJEC(INJTRIG) (((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T6_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T15_TRGO) || \
+ ((INJTRIG) == ADC_INJECTED_SOFTWARE_START) )
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_Internal_HAL_driver_Ext_trig_src_Injected ADC Extended External Trigger Source of Injected Group (Internal)
+ * @{
+ */
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx)
+/* List of external triggers sorted of groups ADC1&ADC2 and/or ADC3&ADC4: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+
+/* External triggers for injected groups of ADC1 & ADC2 */
+#define ADC1_2_EXTERNALTRIGINJEC_T1_TRGO ((uint32_t)0x00000000)
+#define ADC1_2_EXTERNALTRIGINJEC_T1_CC4 ((uint32_t)ADC_JSQR_JEXTSEL_0)
+#define ADC1_2_EXTERNALTRIGINJEC_T2_TRGO ((uint32_t)ADC_JSQR_JEXTSEL_1)
+#define ADC1_2_EXTERNALTRIGINJEC_T2_CC1 ((uint32_t)(ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_CC4 ((uint32_t)ADC_JSQR_JEXTSEL_2)
+#define ADC1_2_EXTERNALTRIGINJEC_T4_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_EXT_IT15 ((uint32_t)(ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1))
+#define ADC1_2_EXTERNALTRIGINJEC_T8_CC4 ((uint32_t)(ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T1_TRGO2 ((uint32_t)ADC_JSQR_JEXTSEL_3)
+#define ADC1_2_EXTERNALTRIGINJEC_T8_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T8_TRGO2 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_1))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_CC3 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_CC1 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T6_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1))
+#define ADC1_2_EXTERNALTRIGINJEC_T15_TRGO ((uint32_t)ADC_JSQR_JEXTSEL)
+
+/* External triggers for injected groups of ADC3 & ADC4 */
+/* Note: External triggers JEXT2 and JEXT5 are the same (TIM4_CC3 event). */
+/* JEXT2 is the main trigger, JEXT5 could be redirected to another */
+/* in future devices. */
+/* However, this channel is implemented with a SW offset of 0x10000 for */
+/* differentiation between similar triggers of common groups ADC1&ADC2, */
+/* ADC3&ADC4 (Differentiation processed into macro */
+/* __HAL_ADC_JSQR_JEXTSEL) */
+#define ADC3_4_EXTERNALTRIGINJEC_T1_TRGO ((uint32_t)0x00000000)
+#define ADC3_4_EXTERNALTRIGINJEC_T1_CC4 ((uint32_t)ADC_JSQR_JEXTSEL_0)
+#define ADC3_4_EXTERNALTRIGINJEC_T4_CC3 ((uint32_t)ADC_JSQR_JEXTSEL_1 | 0x10000)
+#define ADC3_4_EXTERNALTRIGINJEC_T8_CC2 ((uint32_t)(ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0))
+#define ADC3_4_EXTERNALTRIGINJEC_T8_CC4 ((uint32_t)ADC_JSQR_JEXTSEL_2)
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+#define ADC3_4_EXTERNALTRIGINJEC_T20_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_0))
+#endif /* STM32F303xE || STM32F398xx */
+
+#define ADC3_4_EXTERNALTRIGINJEC_T4_CC4 ((uint32_t)(ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1))
+#define ADC3_4_EXTERNALTRIGINJEC_T4_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0))
+#define ADC3_4_EXTERNALTRIGINJEC_T1_TRGO2 ((uint32_t)ADC_JSQR_JEXTSEL_3)
+#define ADC3_4_EXTERNALTRIGINJEC_T8_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_0))
+#define ADC3_4_EXTERNALTRIGINJEC_T8_TRGO2 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_1))
+#define ADC3_4_EXTERNALTRIGINJEC_T1_CC3 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0))
+#define ADC3_4_EXTERNALTRIGINJEC_T3_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2))
+#define ADC3_4_EXTERNALTRIGINJEC_T2_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_0))
+#define ADC3_4_EXTERNALTRIGINJEC_T7_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1))
+#define ADC3_4_EXTERNALTRIGINJEC_T15_TRGO ((uint32_t)ADC_JSQR_JEXTSEL)
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xE) || \
+ defined(STM32F302xC)
+/* List of external triggers of group ADC1&ADC2: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+#define ADC1_2_EXTERNALTRIGINJEC_T1_TRGO ((uint32_t)0x00000000)
+#define ADC1_2_EXTERNALTRIGINJEC_T1_CC4 ((uint32_t)ADC_JSQR_JEXTSEL_0)
+#define ADC1_2_EXTERNALTRIGINJEC_T2_TRGO ((uint32_t)ADC_JSQR_JEXTSEL_1)
+#define ADC1_2_EXTERNALTRIGINJEC_T2_CC1 ((uint32_t)(ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_CC4 ((uint32_t)ADC_JSQR_JEXTSEL_2)
+#define ADC1_2_EXTERNALTRIGINJEC_T4_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_EXT_IT15 ((uint32_t)(ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1))
+#define ADC1_2_EXTERNALTRIGINJEC_T1_TRGO2 ((uint32_t)ADC_JSQR_JEXTSEL_3)
+#define ADC1_2_EXTERNALTRIGINJEC_T3_CC3 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_CC1 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T6_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1))
+#define ADC1_2_EXTERNALTRIGINJEC_T15_TRGO ((uint32_t)ADC_JSQR_JEXTSEL)
+#endif /* STM32F302xE || */
+ /* STM32F302xC */
+
+#if defined(STM32F303x8) || defined(STM32F328xx)
+/* List of external triggers of group ADC1&ADC2: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+#define ADC1_2_EXTERNALTRIGINJEC_T1_TRGO ((uint32_t)0x00000000)
+#define ADC1_2_EXTERNALTRIGINJEC_T1_CC4 ((uint32_t)ADC_JSQR_JEXTSEL_0)
+#define ADC1_2_EXTERNALTRIGINJEC_T2_TRGO ((uint32_t)ADC_JSQR_JEXTSEL_1)
+#define ADC1_2_EXTERNALTRIGINJEC_T2_CC1 ((uint32_t)(ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_CC4 ((uint32_t)ADC_JSQR_JEXTSEL_2)
+#define ADC1_2_EXTERNALTRIGINJEC_T4_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_EXT_IT15 ((uint32_t)(ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1))
+#define ADC1_2_EXTERNALTRIGINJEC_T8_CC4 ((uint32_t)(ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T1_TRGO2 ((uint32_t)ADC_JSQR_JEXTSEL_3)
+#define ADC1_2_EXTERNALTRIGINJEC_T8_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T8_TRGO2 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_1))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_CC3 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_CC1 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T6_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1))
+#define ADC1_2_EXTERNALTRIGINJEC_T15_TRGO ((uint32_t)ADC_JSQR_JEXTSEL)
+#endif /* STM32F303x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+/* List of external triggers of group ADC1&ADC2: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+#define ADC1_2_EXTERNALTRIGINJEC_T1_TRGO ((uint32_t)0x00000000)
+#define ADC1_2_EXTERNALTRIGINJEC_T1_CC4 ((uint32_t)ADC_JSQR_JEXTSEL_0)
+#define ADC1_2_EXTERNALTRIGINJEC_T2_TRGO ((uint32_t)ADC_JSQR_JEXTSEL_1)
+#define ADC1_2_EXTERNALTRIGINJEC_T2_CC1 ((uint32_t)(ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_CC4 ((uint32_t)ADC_JSQR_JEXTSEL_2)
+#define ADC1_2_EXTERNALTRIGINJEC_EXT_IT15 ((uint32_t)(ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1))
+#define ADC1_2_EXTERNALTRIGINJEC_T1_TRGO2 ((uint32_t)ADC_JSQR_JEXTSEL_3)
+#define ADC1_2_EXTERNALTRIGINJEC_HRTIM_TRG2 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_HRTIM_TRG4 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_1))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_CC3 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_1 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2))
+#define ADC1_2_EXTERNALTRIGINJEC_T3_CC1 ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_0))
+#define ADC1_2_EXTERNALTRIGINJEC_T6_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1))
+#define ADC1_2_EXTERNALTRIGINJEC_T15_TRGO ((uint32_t)ADC_JSQR_JEXTSEL)
+#endif /* STM32F334x8 */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/* List of external triggers of injected group for ADC1: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+#define ADC1_EXTERNALTRIGINJEC_T1_TRGO ((uint32_t)0x00000000)
+#define ADC1_EXTERNALTRIGINJEC_T1_CC4 ((uint32_t)ADC_JSQR_JEXTSEL_0)
+#define ADC1_EXTERNALTRIGINJEC_EXT_IT15 ((uint32_t)(ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1))
+#define ADC1_EXTERNALTRIGINJEC_T1_TRGO2 ((uint32_t)ADC_JSQR_JEXTSEL_3)
+#define ADC1_EXTERNALTRIGINJEC_T6_TRGO ((uint32_t)(ADC_JSQR_JEXTSEL_3 | ADC_JSQR_JEXTSEL_2 | ADC_JSQR_JEXTSEL_1))
+#define ADC1_EXTERNALTRIGINJEC_T15_TRGO ((uint32_t)ADC_JSQR_JEXTSEL)
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_Common_mode ADC Extended Dual ADC Mode
+ * @{
+ */
+#define ADC_MODE_INDEPENDENT ((uint32_t)(0x00000000))
+#define ADC_DUALMODE_REGSIMULT_INJECSIMULT ((uint32_t)(ADC12_CCR_MULTI_0))
+#define ADC_DUALMODE_REGSIMULT_ALTERTRIG ((uint32_t)(ADC12_CCR_MULTI_1))
+#define ADC_DUALMODE_INJECSIMULT ((uint32_t)(ADC12_CCR_MULTI_2 | ADC12_CCR_MULTI_0))
+#define ADC_DUALMODE_REGSIMULT ((uint32_t)(ADC12_CCR_MULTI_2 | ADC12_CCR_MULTI_1))
+#define ADC_DUALMODE_INTERL ((uint32_t)(ADC12_CCR_MULTI_2 | ADC12_CCR_MULTI_1 | ADC12_CCR_MULTI_0))
+#define ADC_DUALMODE_ALTERTRIG ((uint32_t)(ADC12_CCR_MULTI_3 | ADC12_CCR_MULTI_0))
+
+#define IS_ADC_MODE(MODE) (((MODE) == ADC_MODE_INDEPENDENT) || \
+ ((MODE) == ADC_DUALMODE_REGSIMULT_INJECSIMULT) || \
+ ((MODE) == ADC_DUALMODE_REGSIMULT_ALTERTRIG) || \
+ ((MODE) == ADC_DUALMODE_INJECSIMULT) || \
+ ((MODE) == ADC_DUALMODE_REGSIMULT) || \
+ ((MODE) == ADC_DUALMODE_INTERL) || \
+ ((MODE) == ADC_DUALMODE_ALTERTRIG) )
+/**
+ * @}
+ */
+
+
+/** @defgroup ADCEx_Direct_memory_access_mode_for_multimode ADC Extended DMA Mode for Dual ADC Mode
+ * @{
+ */
+#define ADC_DMAACCESSMODE_DISABLED ((uint32_t)0x00000000) /*!< DMA multimode disabled: each ADC will use its own DMA channel */
+#define ADC_DMAACCESSMODE_12_10_BITS ((uint32_t)ADC12_CCR_MDMA_1) /*!< DMA multimode enabled (one DMA channel for both ADC, DMA of ADC master) for 12 and 10 bits resolution */
+#define ADC_DMAACCESSMODE_8_6_BITS ((uint32_t)ADC12_CCR_MDMA) /*!< DMA multimode enabled (one DMA channel for both ADC, DMA of ADC master) for 8 and 6 bits resolution */
+
+#define IS_ADC_DMA_ACCESS_MODE(MODE) (((MODE) == ADC_DMAACCESSMODE_DISABLED) || \
+ ((MODE) == ADC_DMAACCESSMODE_12_10_BITS) || \
+ ((MODE) == ADC_DMAACCESSMODE_8_6_BITS) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_delay_between_2_sampling_phases ADC Extended Delay Between 2 Sampling Phases
+ * @{
+ */
+#define ADC_TWOSAMPLINGDELAY_1CYCLE ((uint32_t)(0x00000000))
+#define ADC_TWOSAMPLINGDELAY_2CYCLES ((uint32_t)(ADC12_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_3CYCLES ((uint32_t)(ADC12_CCR_DELAY_1))
+#define ADC_TWOSAMPLINGDELAY_4CYCLES ((uint32_t)(ADC12_CCR_DELAY_1 | ADC12_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_5CYCLES ((uint32_t)(ADC12_CCR_DELAY_2))
+#define ADC_TWOSAMPLINGDELAY_6CYCLES ((uint32_t)(ADC12_CCR_DELAY_2 | ADC12_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_7CYCLES ((uint32_t)(ADC12_CCR_DELAY_2 | ADC12_CCR_DELAY_1))
+#define ADC_TWOSAMPLINGDELAY_8CYCLES ((uint32_t)(ADC12_CCR_DELAY_2 | ADC12_CCR_DELAY_1 | ADC12_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_9CYCLES ((uint32_t)(ADC12_CCR_DELAY_3))
+#define ADC_TWOSAMPLINGDELAY_10CYCLES ((uint32_t)(ADC12_CCR_DELAY_3 | ADC12_CCR_DELAY_0))
+#define ADC_TWOSAMPLINGDELAY_11CYCLES ((uint32_t)(ADC12_CCR_DELAY_3 | ADC12_CCR_DELAY_1))
+#define ADC_TWOSAMPLINGDELAY_12CYCLES ((uint32_t)(ADC12_CCR_DELAY_3 | ADC12_CCR_DELAY_1 | ADC12_CCR_DELAY_0))
+
+#define IS_ADC_SAMPLING_DELAY(DELAY) (((DELAY) == ADC_TWOSAMPLINGDELAY_1CYCLE) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_2CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_3CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_4CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_5CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_6CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_7CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_8CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_9CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_10CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_11CYCLES) || \
+ ((DELAY) == ADC_TWOSAMPLINGDELAY_12CYCLES) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_analog_watchdog_number ADC Extended Analog Watchdog Selection
+ * @{
+ */
+#define ADC_ANALOGWATCHDOG_1 ((uint32_t)0x00000001)
+#define ADC_ANALOGWATCHDOG_2 ((uint32_t)0x00000002)
+#define ADC_ANALOGWATCHDOG_3 ((uint32_t)0x00000003)
+
+#define IS_ADC_ANALOG_WATCHDOG_NUMBER(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_1) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_2) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_3) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_analog_watchdog_mode ADC Extended Analog Watchdog Mode
+ * @{
+ */
+#define ADC_ANALOGWATCHDOG_NONE ((uint32_t) 0x00000000)
+#define ADC_ANALOGWATCHDOG_SINGLE_REG ((uint32_t)(ADC_CFGR_AWD1SGL | ADC_CFGR_AWD1EN))
+#define ADC_ANALOGWATCHDOG_SINGLE_INJEC ((uint32_t)(ADC_CFGR_AWD1SGL | ADC_CFGR_JAWD1EN))
+#define ADC_ANALOGWATCHDOG_SINGLE_REGINJEC ((uint32_t)(ADC_CFGR_AWD1SGL | ADC_CFGR_AWD1EN | ADC_CFGR_JAWD1EN))
+#define ADC_ANALOGWATCHDOG_ALL_REG ((uint32_t) ADC_CFGR_AWD1EN)
+#define ADC_ANALOGWATCHDOG_ALL_INJEC ((uint32_t) ADC_CFGR_JAWD1EN)
+#define ADC_ANALOGWATCHDOG_ALL_REGINJEC ((uint32_t)(ADC_CFGR_AWD1EN | ADC_CFGR_JAWD1EN))
+
+#define IS_ADC_ANALOG_WATCHDOG_MODE(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_NONE) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_INJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REG) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_INJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REGINJEC) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_conversion_group ADC Conversion Group
+ * @{
+ */
+#define REGULAR_GROUP ((uint32_t)(ADC_FLAG_EOC | ADC_FLAG_EOS))
+#define INJECTED_GROUP ((uint32_t)(ADC_FLAG_JEOC | ADC_FLAG_JEOS))
+#define REGULAR_INJECTED_GROUP ((uint32_t)(ADC_FLAG_EOC | ADC_FLAG_EOS | ADC_FLAG_JEOC | ADC_FLAG_JEOS))
+
+#define IS_ADC_CONVERSION_GROUP(CONVERSION) (((CONVERSION) == REGULAR_GROUP) || \
+ ((CONVERSION) == INJECTED_GROUP) || \
+ ((CONVERSION) == REGULAR_INJECTED_GROUP) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_Event_type ADC Extended Event Type
+ * @{
+ */
+#define AWD1_EVENT ((uint32_t)ADC_FLAG_AWD1) /*!< ADC Analog watchdog 1 event (main analog watchdog, present on all STM32 devices) */
+#define AWD2_EVENT ((uint32_t)ADC_FLAG_AWD2) /*!< ADC Analog watchdog 2 event (additional analog watchdog, present only on STM32F3 devices) */
+#define AWD3_EVENT ((uint32_t)ADC_FLAG_AWD3) /*!< ADC Analog watchdog 3 event (additional analog watchdog, present only on STM32F3 devices) */
+#define OVR_EVENT ((uint32_t)ADC_FLAG_OVR) /*!< ADC overrun event */
+#define JQOVF_EVENT ((uint32_t)ADC_FLAG_JQOVF) /*!< ADC Injected Context Queue Overflow event */
+
+#define AWD_EVENT AWD1_EVENT /*!< ADC Analog watchdog 1 event: Naming for compatibility with other STM32 devices having only 1 analog watchdog */
+
+#define IS_ADC_EVENT_TYPE(EVENT) (((EVENT) == AWD_EVENT) || \
+ ((EVENT) == AWD2_EVENT) || \
+ ((EVENT) == AWD3_EVENT) || \
+ ((EVENT) == OVR_EVENT) || \
+ ((EVENT) == JQOVF_EVENT) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_interrupts_definition ADC Extended Interrupts Definition
+ * @{
+ */
+#define ADC_IT_RDY ADC_IER_RDY /*!< ADC Ready (ADRDY) interrupt source */
+#define ADC_IT_EOSMP ADC_IER_EOSMP /*!< ADC End of Sampling interrupt source */
+#define ADC_IT_EOC ADC_IER_EOC /*!< ADC End of Regular Conversion interrupt source */
+#define ADC_IT_EOS ADC_IER_EOS /*!< ADC End of Regular sequence of Conversions interrupt source */
+#define ADC_IT_OVR ADC_IER_OVR /*!< ADC overrun interrupt source */
+#define ADC_IT_JEOC ADC_IER_JEOC /*!< ADC End of Injected Conversion interrupt source */
+#define ADC_IT_JEOS ADC_IER_JEOS /*!< ADC End of Injected sequence of Conversions interrupt source */
+#define ADC_IT_AWD1 ADC_IER_AWD1 /*!< ADC Analog watchdog 1 interrupt source (main analog watchdog, present on all STM32 devices) */
+#define ADC_IT_AWD2 ADC_IER_AWD2 /*!< ADC Analog watchdog 2 interrupt source (additional analog watchdog, present only on STM32F3 devices) */
+#define ADC_IT_AWD3 ADC_IER_AWD3 /*!< ADC Analog watchdog 3 interrupt source (additional analog watchdog, present only on STM32F3 devices) */
+#define ADC_IT_JQOVF ADC_IER_JQOVF /*!< ADC Injected Context Queue Overflow interrupt source */
+
+#define ADC_IT_AWD ADC_IT_AWD1 /*!< ADC Analog watchdog 1 interrupt source: Naming for compatibility with other STM32 devices having only 1 analog watchdog */
+
+/* Check of single flag */
+#define IS_ADC_IT(IT) (((IT) == ADC_IT_RDY) || ((IT) == ADC_IT_EOSMP) || \
+ ((IT) == ADC_IT_EOC) || ((IT) == ADC_IT_EOS) || \
+ ((IT) == ADC_IT_OVR) || ((IT) == ADC_IT_EOS) || \
+ ((IT) == ADC_IT_JEOS) || ((IT) == ADC_IT_AWD1) || \
+ ((IT) == ADC_IT_AWD2) || ((IT) == ADC_IT_AWD3) || \
+ ((IT) == ADC_IT_JQOVF) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_flags_definition ADC Extended Flags Definition
+ * @{
+ */
+#define ADC_FLAG_RDY ADC_ISR_ADRD /*!< ADC Ready (ADRDY) flag */
+#define ADC_FLAG_EOSMP ADC_ISR_EOSMP /*!< ADC End of Sampling flag */
+#define ADC_FLAG_EOC ADC_ISR_EOC /*!< ADC End of Regular Conversion flag */
+#define ADC_FLAG_EOS ADC_ISR_EOS /*!< ADC End of Regular sequence of Conversions flag */
+#define ADC_FLAG_OVR ADC_ISR_OVR /*!< ADC overrun flag */
+#define ADC_FLAG_JEOC ADC_ISR_JEOC /*!< ADC End of Injected Conversion flag */
+#define ADC_FLAG_JEOS ADC_ISR_JEOS /*!< ADC End of Injected sequence of Conversions flag */
+#define ADC_FLAG_AWD1 ADC_ISR_AWD1 /*!< ADC Analog watchdog 1 flag (main analog watchdog, present on all STM32 devices) */
+#define ADC_FLAG_AWD2 ADC_ISR_AWD2 /*!< ADC Analog watchdog 2 flag (additional analog watchdog, present only on STM32F3 devices) */
+#define ADC_FLAG_AWD3 ADC_ISR_AWD3 /*!< ADC Analog watchdog 3 flag (additional analog watchdog, present only on STM32F3 devices) */
+#define ADC_FLAG_JQOVF ADC_ISR_JQOVF /*!< ADC Injected Context Queue Overflow flag */
+
+#define ADC_FLAG_AWD ADC_FLAG_AWD1 /*!< ADC Analog watchdog 1 flag: Naming for compatibility with other STM32 devices having only 1 analog watchdog */
+
+#define ADC_FLAG_ALL (ADC_FLAG_RDY | ADC_FLAG_EOSMP | ADC_FLAG_EOC | ADC_FLAG_EOS | \
+ ADC_FLAG_JEOC | ADC_FLAG_JEOS | ADC_FLAG_OVR | ADC_FLAG_AWD1 | \
+ ADC_FLAG_AWD2 | ADC_FLAG_AWD3 | ADC_FLAG_JQOVF)
+
+/* Combination of all post-conversion flags bits: EOC/EOS, JEOC/JEOS, OVR, AWDx */
+#define ADC_FLAG_POSTCONV_ALL (ADC_FLAG_EOC | ADC_FLAG_EOS | ADC_FLAG_JEOC | ADC_FLAG_JEOS | \
+ ADC_FLAG_OVR | ADC_FLAG_AWD1 | ADC_FLAG_AWD2 | ADC_FLAG_AWD3 | \
+ ADC_FLAG_JQOVF)
+
+/* Check of single flag */
+#define IS_ADC_FLAG(FLAG) (((FLAG) == ADC_FLAG_RDY) || ((FLAG) == ADC_FLAG_EOSMP) || \
+ ((FLAG) == ADC_FLAG_EOC) || ((FLAG) == ADC_FLAG_EOS) || \
+ ((FLAG) == ADC_FLAG_OVR) || ((FLAG) == ADC_FLAG_JEOC) || \
+ ((FLAG) == ADC_FLAG_JEOS) || ((FLAG) == ADC_FLAG_AWD1) || \
+ ((FLAG) == ADC_FLAG_AWD2) || ((FLAG) == ADC_FLAG_AWD3) || \
+ ((FLAG) == ADC_FLAG_JQOVF) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_multimode_bits ADC Multimode Bits
+ * @{
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define ADC_CCR_MULTI ADC12_CCR_MULTI /*!< Multi ADC mode selection */
+#define ADC_CCR_MULTI_0 ADC12_CCR_MULTI_0 /*!< MULTI bit 0 */
+#define ADC_CCR_MULTI_1 ADC12_CCR_MULTI_1 /*!< MULTI bit 1 */
+#define ADC_CCR_MULTI_2 ADC12_CCR_MULTI_2 /*!< MULTI bit 2 */
+#define ADC_CCR_MULTI_3 ADC12_CCR_MULTI_3 /*!< MULTI bit 3 */
+#define ADC_CCR_MULTI_4 ADC12_CCR_MULTI_4 /*!< MULTI bit 4 */
+#define ADC_CCR_DELAY ADC12_CCR_DELAY /*!< Delay between 2 sampling phases */
+#define ADC_CCR_DELAY_0 ADC12_CCR_DELAY_0 /*!< DELAY bit 0 */
+#define ADC_CCR_DELAY_1 ADC12_CCR_DELAY_1 /*!< DELAY bit 1 */
+#define ADC_CCR_DELAY_2 ADC12_CCR_DELAY_2 /*!< DELAY bit 2 */
+#define ADC_CCR_DELAY_3 ADC12_CCR_DELAY_3 /*!< DELAY bit 3 */
+#define ADC_CCR_DMACFG ADC12_CCR_DMACFG /*!< DMA configuration for multi-ADC mode */
+#define ADC_CCR_MDMA ADC12_CCR_MDMA /*!< DMA mode for multi-ADC mode */
+#define ADC_CCR_MDMA_0 ADC12_CCR_MDMA_0 /*!< MDMA bit 0 */
+#define ADC_CCR_MDMA_1 ADC12_CCR_MDMA_1 /*!< MDMA bit 1 */
+#define ADC_CCR_CKMODE ADC12_CCR_CKMODE /*!< ADC clock mode */
+#define ADC_CCR_CKMODE_0 ADC12_CCR_CKMODE_0 /*!< CKMODE bit 0 */
+#define ADC_CCR_CKMODE_1 ADC12_CCR_CKMODE_1 /*!< CKMODE bit 1 */
+#define ADC_CCR_VREFEN ADC12_CCR_VREFEN /*!< VREFINT enable */
+#define ADC_CCR_TSEN ADC12_CCR_TSEN /*!< Temperature sensor enable */
+#define ADC_CCR_VBATEN ADC12_CCR_VBATEN /*!< VBAT enable */
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define ADC_CCR_MULTI ADC1_CCR_MULTI /*!< Multi ADC mode selection */
+#define ADC_CCR_MULTI_0 ADC1_CCR_MULTI_0 /*!< MULTI bit 0 */
+#define ADC_CCR_MULTI_1 ADC1_CCR_MULTI_1 /*!< MULTI bit 1 */
+#define ADC_CCR_MULTI_2 ADC1_CCR_MULTI_2 /*!< MULTI bit 2 */
+#define ADC_CCR_MULTI_3 ADC1_CCR_MULTI_3 /*!< MULTI bit 3 */
+#define ADC_CCR_MULTI_4 ADC1_CCR_MULTI_4 /*!< MULTI bit 4 */
+#define ADC_CCR_DELAY ADC1_CCR_DELAY /*!< Delay between 2 sampling phases */
+#define ADC_CCR_DELAY_0 ADC1_CCR_DELAY_0 /*!< DELAY bit 0 */
+#define ADC_CCR_DELAY_1 ADC1_CCR_DELAY_1 /*!< DELAY bit 1 */
+#define ADC_CCR_DELAY_2 ADC1_CCR_DELAY_2 /*!< DELAY bit 2 */
+#define ADC_CCR_DELAY_3 ADC1_CCR_DELAY_3 /*!< DELAY bit 3 */
+#define ADC_CCR_DMACFG ADC1_CCR_DMACFG /*!< DMA configuration for multi-ADC mode */
+#define ADC_CCR_MDMA ADC1_CCR_MDMA /*!< DMA mode for multi-ADC mode */
+#define ADC_CCR_MDMA_0 ADC1_CCR_MDMA_0 /*!< MDMA bit 0 */
+#define ADC_CCR_MDMA_1 ADC1_CCR_MDMA_1 /*!< MDMA bit 1 */
+#define ADC_CCR_CKMODE ADC1_CCR_CKMODE /*!< ADC clock mode */
+#define ADC_CCR_CKMODE_0 ADC1_CCR_CKMODE_0 /*!< CKMODE bit 0 */
+#define ADC_CCR_CKMODE_1 ADC1_CCR_CKMODE_1 /*!< CKMODE bit 1 */
+#define ADC_CCR_VREFEN ADC1_CCR_VREFEN /*!< VREFINT enable */
+#define ADC_CCR_TSEN ADC1_CCR_TSEN /*!< Temperature sensor enable */
+#define ADC_CCR_VBATEN ADC1_CCR_VBATEN /*!< VBAT enable */
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_range_verification ADC Extended Range Verification
+ * in function of ADC resolution selected (12, 10, 8 or 6 bits)
+ * @{
+ */
+#define IS_ADC_RANGE(RESOLUTION, ADC_VALUE) \
+ ((((RESOLUTION) == ADC_RESOLUTION12b) && ((ADC_VALUE) <= ((uint32_t)0x0FFF))) || \
+ (((RESOLUTION) == ADC_RESOLUTION10b) && ((ADC_VALUE) <= ((uint32_t)0x03FF))) || \
+ (((RESOLUTION) == ADC_RESOLUTION8b) && ((ADC_VALUE) <= ((uint32_t)0x00FF))) || \
+ (((RESOLUTION) == ADC_RESOLUTION6b) && ((ADC_VALUE) <= ((uint32_t)0x003F))) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_injected_nb_conv_verification ADC Injected Conversion Number Verification
+ * @{
+ */
+#define IS_ADC_INJECTED_NB_CONV(LENGTH) (((LENGTH) >= ((uint32_t)1)) && ((LENGTH) <= ((uint32_t)4)))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_regular_nb_conv_verification ADC Regular Conversion Number Verification
+ * @{
+ */
+#define IS_ADC_REGULAR_NB_CONV(LENGTH) (((LENGTH) >= ((uint32_t)1)) && ((LENGTH) <= ((uint32_t)16)))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_regular_discontinuous_mode_number_verification ADC Regular Discontinuous Mode NumberVerification
+ * @{
+ */
+#define IS_ADC_REGULAR_DISCONT_NUMBER(NUMBER) (((NUMBER) >= ((uint32_t)1)) && ((NUMBER) <= ((uint32_t)8)))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_calibration_factor_length_verification ADC Calibration Factor Length Verification
+ * @{
+ */
+/**
+ * @brief Calibration factor length verification (7 bits maximum)
+ * @param _Calibration_Factor_: Calibration factor value
+ * @retval None
+ */
+#define IS_ADC_CALFACT(_Calibration_Factor_) ((_Calibration_Factor_) <= ((uint32_t)0x7F))
+/**
+ * @}
+ */
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup ADCEx_Data_align ADC Extended Data Alignment
+ * @{
+ */
+#define ADC_DATAALIGN_RIGHT ((uint32_t)0x00000000)
+#define ADC_DATAALIGN_LEFT ((uint32_t)ADC_CR2_ALIGN)
+
+#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DATAALIGN_RIGHT) || \
+ ((ALIGN) == ADC_DATAALIGN_LEFT) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_Scan_mode ADC Extended Scan Mode
+ * @{
+ */
+#define ADC_SCAN_DISABLE ((uint32_t)0x00000000)
+#define ADC_SCAN_ENABLE ((uint32_t)0x00000001)
+
+#define IS_ADC_SCAN_MODE(SCAN_MODE) (((SCAN_MODE) == ADC_SCAN_DISABLE) || \
+ ((SCAN_MODE) == ADC_SCAN_ENABLE) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_edge_Regular ADC Extended External trigger enable for regular channels
+ * @{
+ */
+#define ADC_EXTERNALTRIGCONVEDGE_NONE ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGCONVEDGE_RISING ((uint32_t)ADC_CR2_EXTTRIG)
+
+#define IS_ADC_EXTTRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGCONVEDGE_NONE) || \
+ ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISING) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_source_Regular ADC Extended External trigger selection for regular group
+ * @{
+ */
+/* List of external triggers with generic trigger name, sorted by trigger */
+/* name: */
+
+/* External triggers of regular group for ADC1 */
+#define ADC_EXTERNALTRIGCONV_T2_CC2 ADC_EXTERNALTRIG_T2_CC2
+#define ADC_EXTERNALTRIGCONV_T3_TRGO ADC_EXTERNALTRIG_T3_TRGO
+#define ADC_EXTERNALTRIGCONV_T4_CC2 ADC_EXTERNALTRIG_T4_CC2
+#define ADC_EXTERNALTRIGCONV_T19_TRGO ADC_EXTERNALTRIG_T19_TRGO
+#define ADC_EXTERNALTRIGCONV_T19_CC3 ADC_EXTERNALTRIG_T19_CC3
+#define ADC_EXTERNALTRIGCONV_T19_CC4 ADC_EXTERNALTRIG_T19_CC4
+#define ADC_EXTERNALTRIGCONV_EXT_IT11 ADC_EXTERNALTRIG_EXT_IT11
+#define ADC_SOFTWARE_START ADC_SWSTART
+
+#define IS_ADC_EXTTRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T19_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T19_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_T19_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGCONV_EXT_IT11) || \
+ ((REGTRIG) == ADC_SOFTWARE_START) )
+/**
+ * @}
+ */
+
+
+/** @defgroup ADCEx_Internal_HAL_driver_Ext_trig_src_Regular ADC Extended External trigger selection for regular group (Used Internally)
+ * @{
+ */
+
+/* List of external triggers of regular group for ADC1: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+
+/* External triggers of regular group for ADC1 */
+#define ADC_EXTERNALTRIG_T19_TRGO ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIG_T19_CC3 ((uint32_t)ADC_CR2_EXTSEL_0)
+#define ADC_EXTERNALTRIG_T19_CC4 ((uint32_t)ADC_CR2_EXTSEL_1)
+#define ADC_EXTERNALTRIG_T2_CC2 ((uint32_t)(ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIG_T3_TRGO ((uint32_t)ADC_CR2_EXTSEL_2)
+#define ADC_EXTERNALTRIG_T4_CC2 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0))
+#define ADC_EXTERNALTRIG_EXT_IT11 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1))
+#define ADC_SWSTART ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0))
+
+/**
+ * @}
+ */
+
+
+/** @defgroup ADCEx_channels ADC Extended Channels
+ * @{
+ */
+/* Note: Depending on devices, some channels may not be available on package */
+/* pins. Refer to device datasheet for channels availability. */
+#define ADC_CHANNEL_0 ((uint32_t)0x00000000)
+#define ADC_CHANNEL_1 ((uint32_t)(ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_2 ((uint32_t)(ADC_SQR3_SQ1_1))
+#define ADC_CHANNEL_3 ((uint32_t)(ADC_SQR3_SQ1_1 | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_4 ((uint32_t)(ADC_SQR3_SQ1_2))
+#define ADC_CHANNEL_5 ((uint32_t)(ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_6 ((uint32_t)(ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_1))
+#define ADC_CHANNEL_7 ((uint32_t)(ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_1 | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_8 ((uint32_t)(ADC_SQR3_SQ1_3))
+#define ADC_CHANNEL_9 ((uint32_t)(ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_10 ((uint32_t)(ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_1))
+#define ADC_CHANNEL_11 ((uint32_t)(ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_1 | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_12 ((uint32_t)(ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_2))
+#define ADC_CHANNEL_13 ((uint32_t)(ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_14 ((uint32_t)(ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_1))
+#define ADC_CHANNEL_15 ((uint32_t)(ADC_SQR3_SQ1_3 | ADC_SQR3_SQ1_2 | ADC_SQR3_SQ1_1 | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_16 ((uint32_t)(ADC_SQR3_SQ1_4))
+#define ADC_CHANNEL_17 ((uint32_t)(ADC_SQR3_SQ1_4 | ADC_SQR3_SQ1_0))
+#define ADC_CHANNEL_18 ((uint32_t)(ADC_SQR3_SQ1_4 | ADC_SQR3_SQ1_1))
+
+#define ADC_CHANNEL_TEMPSENSOR ADC_CHANNEL_16
+#define ADC_CHANNEL_VREFINT ADC_CHANNEL_17
+#define ADC_CHANNEL_VBAT ADC_CHANNEL_18
+
+#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_CHANNEL_0) || \
+ ((CHANNEL) == ADC_CHANNEL_1) || \
+ ((CHANNEL) == ADC_CHANNEL_2) || \
+ ((CHANNEL) == ADC_CHANNEL_3) || \
+ ((CHANNEL) == ADC_CHANNEL_4) || \
+ ((CHANNEL) == ADC_CHANNEL_5) || \
+ ((CHANNEL) == ADC_CHANNEL_6) || \
+ ((CHANNEL) == ADC_CHANNEL_7) || \
+ ((CHANNEL) == ADC_CHANNEL_8) || \
+ ((CHANNEL) == ADC_CHANNEL_9) || \
+ ((CHANNEL) == ADC_CHANNEL_10) || \
+ ((CHANNEL) == ADC_CHANNEL_11) || \
+ ((CHANNEL) == ADC_CHANNEL_12) || \
+ ((CHANNEL) == ADC_CHANNEL_13) || \
+ ((CHANNEL) == ADC_CHANNEL_14) || \
+ ((CHANNEL) == ADC_CHANNEL_15) || \
+ ((CHANNEL) == ADC_CHANNEL_TEMPSENSOR) || \
+ ((CHANNEL) == ADC_CHANNEL_VREFINT) || \
+ ((CHANNEL) == ADC_CHANNEL_VBAT) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_sampling_times ADC Extended Sampling Times
+ * @{
+ */
+#define ADC_SAMPLETIME_1CYCLE_5 ((uint32_t)0x00000000) /*!< Sampling time 1.5 ADC clock cycle */
+#define ADC_SAMPLETIME_7CYCLES_5 ((uint32_t) ADC_SMPR2_SMP0_0) /*!< Sampling time 7.5 ADC clock cycles */
+#define ADC_SAMPLETIME_13CYCLES_5 ((uint32_t) ADC_SMPR2_SMP0_1) /*!< Sampling time 13.5 ADC clock cycles */
+#define ADC_SAMPLETIME_28CYCLES_5 ((uint32_t)(ADC_SMPR2_SMP0_1 | ADC_SMPR2_SMP0_0)) /*!< Sampling time 28.5 ADC clock cycles */
+#define ADC_SAMPLETIME_41CYCLES_5 ((uint32_t) ADC_SMPR2_SMP0_2) /*!< Sampling time 41.5 ADC clock cycles */
+#define ADC_SAMPLETIME_55CYCLES_5 ((uint32_t)(ADC_SMPR2_SMP0_2 | ADC_SMPR2_SMP0_0)) /*!< Sampling time 55.5 ADC clock cycles */
+#define ADC_SAMPLETIME_71CYCLES_5 ((uint32_t)(ADC_SMPR2_SMP0_2 | ADC_SMPR2_SMP0_1)) /*!< Sampling time 71.5 ADC clock cycles */
+#define ADC_SAMPLETIME_239CYCLES_5 ((uint32_t) ADC_SMPR2_SMP0) /*!< Sampling time 239.5 ADC clock cycles */
+
+#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SAMPLETIME_1CYCLE_5) || \
+ ((TIME) == ADC_SAMPLETIME_7CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_13CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_28CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_41CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_55CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_71CYCLES_5) || \
+ ((TIME) == ADC_SAMPLETIME_239CYCLES_5) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_sampling_times_all_channels ADC Extended Sampling Times All Channels
+ * @{
+ */
+#define ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2 \
+ (ADC_SMPR2_SMP9_2 | ADC_SMPR2_SMP8_2 | ADC_SMPR2_SMP7_2 | ADC_SMPR2_SMP6_2 | \
+ ADC_SMPR2_SMP5_2 | ADC_SMPR2_SMP4_2 | ADC_SMPR2_SMP3_2 | ADC_SMPR2_SMP2_2 | \
+ ADC_SMPR2_SMP1_2 | ADC_SMPR2_SMP0_2)
+#define ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2 \
+ (ADC_SMPR1_SMP17_2 | ADC_SMPR1_SMP16_2 | ADC_SMPR1_SMP15_2 | ADC_SMPR1_SMP14_2 | \
+ ADC_SMPR1_SMP13_2 | ADC_SMPR1_SMP12_2 | ADC_SMPR1_SMP11_2 | ADC_SMPR1_SMP10_2 )
+
+#define ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1 \
+ (ADC_SMPR2_SMP9_1 | ADC_SMPR2_SMP8_1 | ADC_SMPR2_SMP7_1 | ADC_SMPR2_SMP6_1 | \
+ ADC_SMPR2_SMP5_1 | ADC_SMPR2_SMP4_1 | ADC_SMPR2_SMP3_1 | ADC_SMPR2_SMP2_1 | \
+ ADC_SMPR2_SMP1_1 | ADC_SMPR2_SMP0_1)
+#define ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1 \
+ (ADC_SMPR1_SMP17_1 | ADC_SMPR1_SMP16_1 | ADC_SMPR1_SMP15_1 | ADC_SMPR1_SMP14_1 | \
+ ADC_SMPR1_SMP13_1 | ADC_SMPR1_SMP12_1 | ADC_SMPR1_SMP11_1 | ADC_SMPR1_SMP10_1 )
+
+#define ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT0 \
+ (ADC_SMPR2_SMP9_0 | ADC_SMPR2_SMP8_0 | ADC_SMPR2_SMP7_0 | ADC_SMPR2_SMP6_0 | \
+ ADC_SMPR2_SMP5_0 | ADC_SMPR2_SMP4_0 | ADC_SMPR2_SMP3_0 | ADC_SMPR2_SMP2_0 | \
+ ADC_SMPR2_SMP1_0 | ADC_SMPR2_SMP0_0)
+#define ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0 \
+ (ADC_SMPR1_SMP17_0 | ADC_SMPR1_SMP16_0 | ADC_SMPR1_SMP15_0 | ADC_SMPR1_SMP14_0 | \
+ ADC_SMPR1_SMP13_0 | ADC_SMPR1_SMP12_0 | ADC_SMPR1_SMP11_0 | ADC_SMPR1_SMP10_0 )
+
+#define ADC_SAMPLETIME_1CYCLE5_SMPR2ALLCHANNELS ((uint32_t)0x00000000)
+#define ADC_SAMPLETIME_7CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT0)
+#define ADC_SAMPLETIME_13CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1)
+#define ADC_SAMPLETIME_28CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1 | ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT0)
+#define ADC_SAMPLETIME_41CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2)
+#define ADC_SAMPLETIME_55CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT0)
+#define ADC_SAMPLETIME_71CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1)
+#define ADC_SAMPLETIME_239CYCLES5_SMPR2ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1 | ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT0)
+
+#define ADC_SAMPLETIME_1CYCLE5_SMPR1ALLCHANNELS ((uint32_t)0x00000000)
+#define ADC_SAMPLETIME_7CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0)
+#define ADC_SAMPLETIME_13CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1)
+#define ADC_SAMPLETIME_28CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1 | ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0)
+#define ADC_SAMPLETIME_41CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2)
+#define ADC_SAMPLETIME_55CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0)
+#define ADC_SAMPLETIME_71CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1)
+#define ADC_SAMPLETIME_239CYCLES5_SMPR1ALLCHANNELS (ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2 | ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1 | ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0)
+
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_regular_rank ADC Extended Regular Channel Rank
+ * @{
+ */
+#define ADC_REGULAR_RANK_1 ((uint32_t)0x00000001)
+#define ADC_REGULAR_RANK_2 ((uint32_t)0x00000002)
+#define ADC_REGULAR_RANK_3 ((uint32_t)0x00000003)
+#define ADC_REGULAR_RANK_4 ((uint32_t)0x00000004)
+#define ADC_REGULAR_RANK_5 ((uint32_t)0x00000005)
+#define ADC_REGULAR_RANK_6 ((uint32_t)0x00000006)
+#define ADC_REGULAR_RANK_7 ((uint32_t)0x00000007)
+#define ADC_REGULAR_RANK_8 ((uint32_t)0x00000008)
+#define ADC_REGULAR_RANK_9 ((uint32_t)0x00000009)
+#define ADC_REGULAR_RANK_10 ((uint32_t)0x0000000A)
+#define ADC_REGULAR_RANK_11 ((uint32_t)0x0000000B)
+#define ADC_REGULAR_RANK_12 ((uint32_t)0x0000000C)
+#define ADC_REGULAR_RANK_13 ((uint32_t)0x0000000D)
+#define ADC_REGULAR_RANK_14 ((uint32_t)0x0000000E)
+#define ADC_REGULAR_RANK_15 ((uint32_t)0x0000000F)
+#define ADC_REGULAR_RANK_16 ((uint32_t)0x00000010)
+
+#define IS_ADC_REGULAR_RANK(CHANNEL) (((CHANNEL) == ADC_REGULAR_RANK_1 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_2 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_3 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_4 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_5 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_6 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_7 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_8 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_9 ) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_10) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_11) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_12) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_13) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_14) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_15) || \
+ ((CHANNEL) == ADC_REGULAR_RANK_16) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_injected_rank ADC Extended Injected Channel Rank
+ * @{
+ */
+#define ADC_INJECTED_RANK_1 ((uint32_t)0x00000001)
+#define ADC_INJECTED_RANK_2 ((uint32_t)0x00000002)
+#define ADC_INJECTED_RANK_3 ((uint32_t)0x00000003)
+#define ADC_INJECTED_RANK_4 ((uint32_t)0x00000004)
+
+#define IS_ADC_INJECTED_RANK(CHANNEL) (((CHANNEL) == ADC_INJECTED_RANK_1) || \
+ ((CHANNEL) == ADC_INJECTED_RANK_2) || \
+ ((CHANNEL) == ADC_INJECTED_RANK_3) || \
+ ((CHANNEL) == ADC_INJECTED_RANK_4) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_edge_Injected External Trigger Edge of Injected Group
+ * @{
+ */
+#define ADC_EXTERNALTRIGINJECCONV_EDGE_NONE ((uint32_t)0x00000000)
+#define ADC_EXTERNALTRIGINJECCONV_EDGE_RISING ((uint32_t)ADC_CR2_JEXTTRIG)
+
+#define IS_ADC_EXTTRIGINJEC_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_NONE) || \
+ ((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISING) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_source_Injected External Trigger Source of Injected Group
+ * @{
+ */
+/* External triggers for injected groups of ADC1 */
+#define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ADC_EXTERNALTRIGINJEC_T2_CC1
+#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ADC_EXTERNALTRIGINJEC_T2_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ADC_EXTERNALTRIGINJEC_T3_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO ADC_EXTERNALTRIGINJEC_T4_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T19_CC1 ADC_EXTERNALTRIGINJEC_T19_CC1
+#define ADC_EXTERNALTRIGINJECCONV_T19_CC2 ADC_EXTERNALTRIGINJEC_T19_CC2
+#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ADC_EXTERNALTRIGINJEC_EXT_IT15
+#define ADC_INJECTED_SOFTWARE_START ADC_JSWSTART
+
+#define IS_ADC_EXTTRIGINJEC(INJTRIG) (((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T19_CC1) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T19_CC2) || \
+ ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
+ ((INJTRIG) == ADC_INJECTED_SOFTWARE_START) )
+/**
+ * @}
+ */
+
+
+/** @defgroup ADCEx_Internal_HAL_driver_Ext_trig_src_Injected ADC Extended External Trigger Source of Injected Group (Internal)
+ * @{
+ */
+
+/* List of external triggers of injected group for ADC1: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+#define ADC_EXTERNALTRIGINJEC_T19_CC1 ((uint32_t) 0x00000000)
+#define ADC_EXTERNALTRIGINJEC_T19_CC2 ((uint32_t) ADC_CR2_JEXTSEL_0)
+#define ADC_EXTERNALTRIGINJEC_T2_TRGO ((uint32_t) ADC_CR2_JEXTSEL_1)
+#define ADC_EXTERNALTRIGINJEC_T2_CC1 ((uint32_t)(ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJEC_T3_CC4 ((uint32_t) ADC_CR2_JEXTSEL_2)
+#define ADC_EXTERNALTRIGINJEC_T4_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJEC_EXT_IT15 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1))
+#define ADC_JSWSTART ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+
+/**
+ * @}
+ */
+
+
+/** @defgroup ADCEx_analog_watchdog_mode ADC Extended analog watchdog mode
+ * @{
+ */
+#define ADC_ANALOGWATCHDOG_NONE ((uint32_t)0x00000000)
+#define ADC_ANALOGWATCHDOG_SINGLE_REG ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN))
+#define ADC_ANALOGWATCHDOG_SINGLE_INJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_JAWDEN))
+#define ADC_ANALOGWATCHDOG_SINGLE_REGINJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN | ADC_CR1_JAWDEN))
+#define ADC_ANALOGWATCHDOG_ALL_REG ((uint32_t) ADC_CR1_AWDEN)
+#define ADC_ANALOGWATCHDOG_ALL_INJEC ((uint32_t) ADC_CR1_JAWDEN)
+#define ADC_ANALOGWATCHDOG_ALL_REGINJEC ((uint32_t)(ADC_CR1_AWDEN | ADC_CR1_JAWDEN))
+
+#define IS_ADC_ANALOG_WATCHDOG_MODE(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_NONE) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_INJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REG) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_INJEC) || \
+ ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REGINJEC) )
+/**
+ * @}
+ */
+
+/** @defgroup ADC_conversion_group ADC Conversion Group
+ * @{
+ */
+#define REGULAR_GROUP ((uint32_t)(ADC_FLAG_EOC))
+#define INJECTED_GROUP ((uint32_t)(ADC_FLAG_JEOC))
+#define REGULAR_INJECTED_GROUP ((uint32_t)(ADC_FLAG_EOC | ADC_FLAG_JEOC))
+
+#define IS_ADC_CONVERSION_GROUP(CONVERSION) (((CONVERSION) == REGULAR_GROUP) || \
+ ((CONVERSION) == INJECTED_GROUP) || \
+ ((CONVERSION) == REGULAR_INJECTED_GROUP) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_Event_type ADC Extended Event Type
+ * @{
+ */
+#define AWD_EVENT ((uint32_t)ADC_FLAG_AWD) /*!< ADC Analog watchdog event */
+
+#define IS_ADC_EVENT_TYPE(EVENT) ((EVENT) == AWD_EVENT)
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_interrupts_definition ADC Extended Interrupts Definition
+ * @{
+ */
+#define ADC_IT_EOC ADC_CR1_EOCIE /*!< ADC End of Regular Conversion interrupt source */
+#define ADC_IT_JEOC ADC_CR1_JEOCIE /*!< ADC End of Injected Conversion interrupt source */
+#define ADC_IT_AWD ADC_CR1_AWDIE /*!< ADC Analog watchdog interrupt source */
+
+/* Check of single flag */
+#define IS_ADC_IT(IT) (((IT) == ADC_IT_EOC ) || \
+ ((IT) == ADC_IT_JEOC) || \
+ ((IT) == ADC_IT_AWD ) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_flags_definition ADC Extended Flags Definition
+ * @{
+ */
+#define ADC_FLAG_AWD ADC_SR_AWD /*!< ADC Analog watchdog flag */
+#define ADC_FLAG_EOC ADC_SR_EOC /*!< ADC End of Regular conversion flag */
+#define ADC_FLAG_JEOC ADC_SR_JEOC /*!< ADC End of Injected conversion flag */
+#define ADC_FLAG_JSTRT ADC_SR_JSTRT /*!< ADC Injected group start flag */
+#define ADC_FLAG_STRT ADC_SR_STRT /*!< ADC Regular group start flag */
+
+/* Combination of all post-conversion flags bits: EOC/EOS, JEOC/JEOS, OVR, AWDx */
+#define ADC_FLAG_POSTCONV_ALL (ADC_FLAG_EOC | ADC_FLAG_JEOC | ADC_FLAG_AWD )
+
+/* Check of single flag */
+#define IS_ADC_FLAG(FLAG) (((FLAG) == ADC_FLAG_AWD) || \
+ ((FLAG) == ADC_FLAG_EOC) || \
+ ((FLAG) == ADC_FLAG_JEOC) || \
+ ((FLAG) == ADC_FLAG_JSTRT) || \
+ ((FLAG) == ADC_FLAG_STRT) )
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_range_verification ADC Extended Range Verification
+ * For a unique ADC resolution: 12 bits
+ * @{
+ */
+#define IS_ADC_RANGE(ADC_VALUE) ((ADC_VALUE) <= ((uint32_t)0x0FFF))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_injected_nb_conv_verification ADC Injected Conversion Number Verification
+ * @{
+ */
+#define IS_ADC_INJECTED_NB_CONV(LENGTH) (((LENGTH) >= ((uint32_t)1)) && ((LENGTH) <= ((uint32_t)4)))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_regular_nb_conv_verification ADC Regular Conversion Number Verification
+ * @{
+ */
+#define IS_ADC_REGULAR_NB_CONV(LENGTH) (((LENGTH) >= ((uint32_t)1)) && ((LENGTH) <= ((uint32_t)16)))
+/**
+ * @}
+ */
+
+/** @defgroup ADC_regular_discontinuous_mode_number_verification ADC Regular Discontinuous Mode NumberVerification
+ * @{
+ */
+#define IS_ADC_REGULAR_DISCONT_NUMBER(NUMBER) (((NUMBER) >= ((uint32_t)1)) && ((NUMBER) <= ((uint32_t)8)))
+/**
+ * @}
+ */
+#endif /* STM32F373xC || STM32F378xx */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @addtogroup ADC_Exported_Macro ADC Exported Macros
+ * @{
+ */
+/* Macro for internal HAL driver usage, and possibly can be used into code of */
+/* final user. */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/**
+ * @brief Verification of ADC state: enabled or disabled
+ * @param __HANDLE__: ADC handle
+ * @retval SET (ADC enabled) or RESET (ADC disabled)
+ */
+#define __HAL_ADC_IS_ENABLED(__HANDLE__) \
+ (( ((((__HANDLE__)->Instance->CR) & (ADC_CR_ADEN | ADC_CR_ADDIS)) == ADC_CR_ADEN) && \
+ ((((__HANDLE__)->Instance->ISR) & ADC_FLAG_RDY) == ADC_FLAG_RDY) \
+ ) ? SET : RESET)
+
+/**
+ * @brief Test if conversion trigger of regular group is software start
+ * or external trigger.
+ * @param __HANDLE__: ADC handle
+ * @retval SET (software start) or RESET (external trigger)
+ */
+#define __HAL_ADC_IS_SOFTWARE_START_REGULAR(__HANDLE__) \
+ (((__HANDLE__)->Instance->CFGR & ADC_CFGR_EXTEN) == RESET)
+
+/**
+ * @brief Test if conversion trigger of injected group is software start
+ * or external trigger.
+ * @param __HANDLE__: ADC handle
+ * @retval SET (software start) or RESET (external trigger)
+ */
+#define __HAL_ADC_IS_SOFTWARE_START_INJECTED(__HANDLE__) \
+ (((__HANDLE__)->Instance->JSQR & ADC_JSQR_JEXTEN) == RESET)
+
+/**
+ * @brief Check if no conversion on going on regular and/or injected groups
+ * @param __HANDLE__: ADC handle
+ * @retval SET (conversion is on going) or RESET (no conversion is on going)
+ */
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED(__HANDLE__) \
+ (( (((__HANDLE__)->Instance->CR) & (ADC_CR_ADSTART | ADC_CR_JADSTART)) == RESET \
+ ) ? RESET : SET)
+
+/**
+ * @brief Check if no conversion on going on regular group
+ * @param __HANDLE__: ADC handle
+ * @retval SET (conversion is on going) or RESET (no conversion is on going)
+ */
+#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR(__HANDLE__) \
+ (( (((__HANDLE__)->Instance->CR) & ADC_CR_ADSTART) == RESET \
+ ) ? RESET : SET)
+
+/**
+ * @brief Check if no conversion on going on injected group
+ * @param __HANDLE__: ADC handle
+ * @retval SET (conversion is on going) or RESET (no conversion is on going)
+ */
+#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED(__HANDLE__) \
+ (( (((__HANDLE__)->Instance->CR) & ADC_CR_JADSTART) == RESET \
+ ) ? RESET : SET)
+
+/**
+ * @brief Returns resolution bits in CFGR1 register: RES[1:0].
+ * Returned value is among parameters to @ref ADCEx_Resolution.
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_GET_RESOLUTION(__HANDLE__) (((__HANDLE__)->Instance->CFGR) & ADC_CFGR_RES)
+
+/** @brief Checks if the specified ADC interrupt source is enabled or disabled.
+ * @param __HANDLE__: ADC handle
+ * @param __INTERRUPT__: ADC interrupt source to check
+ * @retval State of interruption (SET or RESET)
+ */
+#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \
+ (( ((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__) \
+ )? SET : RESET \
+ )
+
+/**
+ * @brief Enable the ADC end of conversion interrupt.
+ * @param __HANDLE__: ADC handle
+ * @param __INTERRUPT__: ADC Interrupt
+ * @retval None
+ */
+#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the ADC end of conversion interrupt.
+ * @param __HANDLE__: ADC handle
+ * @param __INTERRUPT__: ADC Interrupt
+ * @retval None
+ */
+#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__))
+
+/**
+ * @brief Get the selected ADC's flag status.
+ * @param __HANDLE__: ADC handle
+ * @param __FLAG__: ADC flag
+ * @retval None
+ */
+#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear the ADC's pending flags
+ * @param __HANDLE__: ADC handle
+ * @param __FLAG__: ADC flag
+ * @retval None
+ */
+/* Note: bit cleared bit by writing 1 (writing 0 has no effect on any bit of register ISR) */
+#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR) = (__FLAG__))
+
+/**
+ * @brief Clear ADC error code (set it to error code: "no error")
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_CLEAR_ERRORCODE(__HANDLE__) ((__HANDLE__)->ErrorCode = HAL_ADC_ERROR_NONE)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/**
+ * @brief Verification of ADC state: enabled or disabled
+ * @param __HANDLE__: ADC handle
+ * @retval SET (ADC enabled) or RESET (ADC disabled)
+ */
+#define __HAL_ADC_IS_ENABLED(__HANDLE__) \
+ ((( ((__HANDLE__)->Instance->CR2 & ADC_CR2_ADON) == ADC_CR2_ADON ) \
+ ) ? SET : RESET)
+
+/**
+ * @brief Test if conversion trigger of regular group is software start
+ * or external trigger.
+ * @param __HANDLE__: ADC handle
+ * @retval SET (software start) or RESET (external trigger)
+ */
+#define __HAL_ADC_IS_SOFTWARE_START_REGULAR(__HANDLE__) \
+ (((__HANDLE__)->Instance->CR2 & ADC_CR2_EXTSEL) == ADC_SOFTWARE_START)
+
+/**
+ * @brief Test if conversion trigger of injected group is software start
+ * or external trigger.
+ * @param __HANDLE__: ADC handle
+ * @retval SET (software start) or RESET (external trigger)
+ */
+#define __HAL_ADC_IS_SOFTWARE_START_INJECTED(__HANDLE__) \
+ (((__HANDLE__)->Instance->CR2 & ADC_CR2_JEXTSEL) == ADC_INJECTED_SOFTWARE_START)
+
+/** @brief Checks if the specified ADC interrupt source is enabled or disabled.
+ * @param __HANDLE__: ADC handle
+ * @param __INTERRUPT__: ADC interrupt source to check
+ * @retval State of interruption (SET or RESET)
+ */
+#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \
+ (( ((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__) \
+ )? SET : RESET \
+ )
+
+
+/**
+ * @brief Enable the ADC end of conversion interrupt.
+ * @param __HANDLE__: ADC handle
+ * @param __INTERRUPT__: ADC Interrupt
+ * @retval None
+ */
+#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the ADC end of conversion interrupt.
+ * @param __HANDLE__: ADC handle
+ * @param __INTERRUPT__: ADC Interrupt
+ * @retval None
+ */
+#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) &= ~(__INTERRUPT__))
+
+/**
+ * @brief Get the selected ADC's flag status.
+ * @param __HANDLE__: ADC handle
+ * @param __FLAG__: ADC flag
+ * @retval None
+ */
+#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear the ADC's pending flags
+ * @param __HANDLE__: ADC handle
+ * @param __FLAG__: ADC flag
+ * @retval None
+ */
+#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__))
+
+/**
+ * @brief Clear ADC error code (set it to error code: "no error")
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_CLEAR_ERRORCODE(__HANDLE__) ((__HANDLE__)->ErrorCode = HAL_ADC_ERROR_NONE)
+
+#endif /* STM32F373xC || STM32F378xx */
+/**
+ * @}
+ */
+
+
+/* Macro reserved for internal HAL driver usage, not intended to be used in */
+/* code of final user. */
+
+/** @defgroup ADCEx_Exported_Macro_internal_HAL_driver ADC Extended Exported Macros (Internal)
+ * @{
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+/**
+ * @brief Set the ADC's sample time for Channels numbers between 0 and 9.
+ * @param _SAMPLETIME_: Sample time parameter.
+ * @param _CHANNELNB_: Channel number.
+ * @retval None
+ */
+#define __HAL_ADC_SMPR1(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * (_CHANNELNB_)))
+
+/**
+ * @brief Set the ADC's sample time for Channels numbers between 10 and 18.
+ * @param _SAMPLETIME_: Sample time parameter.
+ * @param _CHANNELNB_: Channel number.
+ * @retval None
+ */
+#define __HAL_ADC_SMPR2(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * ((_CHANNELNB_) - 10)))
+
+/**
+ * @brief Set the selected regular Channel rank for rank between 1 and 4.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define __HAL_ADC_SQR1_RK(_CHANNELNB_, _RANKNB_) ((_CHANNELNB_) << (6 * (_RANKNB_)))
+
+/**
+ * @brief Set the selected regular Channel rank for rank between 5 and 9.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define __HAL_ADC_SQR2_RK(_CHANNELNB_, _RANKNB_) ((_CHANNELNB_) << (6 * ((_RANKNB_) - 5)))
+
+/**
+ * @brief Set the selected regular Channel rank for rank between 10 and 14.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define __HAL_ADC_SQR3_RK(_CHANNELNB_, _RANKNB_) ((_CHANNELNB_) << (6 * ((_RANKNB_) - 10)))
+
+/**
+ * @brief Set the selected regular Channel rank for rank between 15 and 16.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define __HAL_ADC_SQR4_RK(_CHANNELNB_, _RANKNB_) ((_CHANNELNB_) << (6 * ((_RANKNB_) - 15)))
+
+/**
+ * @brief Set the selected injected Channel rank.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define __HAL_ADC_JSQR_RK(_CHANNELNB_, _RANKNB_) ((_CHANNELNB_) << (6 * (_RANKNB_) +2))
+
+
+/**
+ * @brief Set the Analog Watchdog 1 channel.
+ * @param _CHANNEL_: channel to be monitored by Analog Watchdog 1.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR_AWD1CH(_CHANNEL_) ((_CHANNEL_) << 26)
+
+/**
+ * @brief Configure the channel number into Analog Watchdog 2 or 3.
+ * @param _CHANNEL_: ADC Channel
+ * @retval None
+ */
+#define __HAL_ADC_CFGR_AWD23CR(_CHANNEL_) (1U << (_CHANNEL_))
+
+/**
+ * @brief Enable automatic conversion of injected group
+ * @param _INJECT_AUTO_CONVERSION_: Injected automatic conversion.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION(_INJECT_AUTO_CONVERSION_) ((_INJECT_AUTO_CONVERSION_) << 25)
+
+/**
+ * @brief Enable ADC injected context queue
+ * @param _INJECT_CONTEXT_QUEUE_MODE_: Injected context queue mode.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE(_INJECT_CONTEXT_QUEUE_MODE_) ((_INJECT_CONTEXT_QUEUE_MODE_) << 21)
+
+/**
+ * @brief Enable ADC discontinuous conversion mode for injected group
+ * @param _INJECT_DISCONTINUOUS_MODE_: Injected discontinuous mode.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS(_INJECT_DISCONTINUOUS_MODE_) ((_INJECT_DISCONTINUOUS_MODE_) << 20)
+
+/**
+ * @brief Enable ADC discontinuous conversion mode for regular group
+ * @param _REG_DISCONTINUOUS_MODE_: Regular discontinuous mode.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS(_REG_DISCONTINUOUS_MODE_) ((_REG_DISCONTINUOUS_MODE_) << 16)
+
+/**
+ * @brief Configures the number of discontinuous conversions for regular group.
+ * @param _NBR_DISCONTINUOUS_CONV_: Number of discontinuous conversions.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM(_NBR_DISCONTINUOUS_CONV_) (((_NBR_DISCONTINUOUS_CONV_) - 1) << 17)
+
+/**
+ * @brief Enable the ADC auto delay mode.
+ * @param _AUTOWAIT_: Auto delay bit enable or disable.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR_AUTOWAIT(_AUTOWAIT_) ((_AUTOWAIT_) << 14)
+
+/**
+ * @brief Enable ADC continuous conversion mode.
+ * @param _CONTINUOUS_MODE_: Continuous mode.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR_CONTINUOUS(_CONTINUOUS_MODE_) ((_CONTINUOUS_MODE_) << 13)
+
+/**
+ * @brief Enable ADC overrun mode.
+ * @param _OVERRUN_MODE_: Overrun mode.
+ * @retval Overrun bit setting to be programmed into CFGR register
+ */
+/* Note: Bit ADC_CFGR_OVRMOD not used directly in constant */
+/* "OVR_DATA_OVERWRITTEN" to have this case defined to 0x00, to set it as the */
+/* default case to be compliant with other STM32 devices. */
+#define __HAL_ADC_CFGR_OVERRUN(_OVERRUN_MODE_) \
+ ( ( (_OVERRUN_MODE_) != (OVR_DATA_PRESERVED) \
+ )? (ADC_CFGR_OVRMOD) : (0x00000000) \
+ )
+
+/**
+ * @brief Enable the ADC DMA continuous request.
+ * @param _DMACONTREQ_MODE_: DMA continuous request mode.
+ * @retval None
+ */
+#define __HAL_ADC_CFGR_DMACONTREQ(_DMACONTREQ_MODE_) ((_DMACONTREQ_MODE_) << 1)
+
+/**
+ * @brief For devices with 3 ADCs or more: Defines the external trigger source
+ * for regular group according to ADC into common group ADC1&ADC2 or
+ * ADC3&ADC4 (some triggers with same source have different value to
+ * be programmed into ADC EXTSEL bits of CFGR register).
+ * Note: No risk of trigger bits value of common group ADC1&ADC2
+ * misleading to another trigger at same bits value, because the 3
+ * exceptions below are circular and do not point to any other trigger
+ * with direct treatment.
+ * For devices with 2 ADCs or less: this macro makes no change.
+ * @param __HANDLE__: ADC handle
+ * @param __EXT_TRIG_CONV__: External trigger selected for regular group.
+ * @retval External trigger to be programmed into EXTSEL bits of CFGR register
+ */
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx)
+
+#if defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_ADC_CFGR_EXTSEL(__HANDLE__, __EXT_TRIG_CONV__) \
+ (( ((((__HANDLE__)->Instance) == ADC3) || (((__HANDLE__)->Instance) == ADC4)) \
+ )? \
+ ( ( (__EXT_TRIG_CONV__) == ADC_EXTERNALTRIGCONV_T2_TRGO \
+ )? \
+ (ADC3_4_EXTERNALTRIG_T2_TRGO) \
+ : \
+ ( ( (__EXT_TRIG_CONV__) == ADC_EXTERNALTRIGCONV_T3_TRGO \
+ )? \
+ (ADC3_4_EXTERNALTRIG_T3_TRGO) \
+ : \
+ ( ( (__EXT_TRIG_CONV__) == ADC_EXTERNALTRIGCONV_T8_TRGO \
+ )? \
+ (ADC3_4_EXTERNALTRIG_T8_TRGO) \
+ : \
+ (__EXT_TRIG_CONV__) \
+ ) \
+ ) \
+ ) \
+ : \
+ (__EXT_TRIG_CONV__) \
+ )
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+/* Note: Macro including external triggers specific to device STM303xE: using */
+/* Timer20 with ADC trigger input remap. */
+#define __HAL_ADC_CFGR_EXTSEL(__HANDLE__, __EXT_TRIG_CONV__) \
+ (( ((((__HANDLE__)->Instance) == ADC3) || (((__HANDLE__)->Instance) == ADC4)) \
+ )? \
+ ( ( (__EXT_TRIG_CONV__) == ADC_EXTERNALTRIGCONV_T2_TRGO \
+ )? \
+ (ADC3_4_EXTERNALTRIG_T2_TRGO) \
+ : \
+ ( ( (__EXT_TRIG_CONV__) == ADC_EXTERNALTRIGCONV_T3_TRGO \
+ )? \
+ (ADC3_4_EXTERNALTRIG_T3_TRGO) \
+ : \
+ ( ( (__EXT_TRIG_CONV__) == ADC_EXTERNALTRIGCONV_T8_TRGO \
+ )? \
+ (ADC3_4_EXTERNALTRIG_T8_TRGO) \
+ : \
+ ( ( (__EXT_TRIG_CONV__) == ADC_EXTERNALTRIGCONV_T20_CC1 \
+ )? \
+ (ADC3_4_EXTERNALTRIG_T2_CC1) \
+ : \
+ ( ( (__EXT_TRIG_CONV__) == ADC_EXTERNALTRIGCONV_T20_TRGO \
+ )? \
+ (ADC3_4_EXTERNALTRIG_EXT_IT2) \
+ : \
+ ( ( (__EXT_TRIG_CONV__) == ADC_EXTERNALTRIGCONV_T20_TRGO2 \
+ )? \
+ (ADC3_4_EXTERNALTRIG_T4_CC1) \
+ : \
+ (__EXT_TRIG_CONV__) \
+ ) \
+ ) \
+ ) \
+ ) \
+ ) \
+ ) \
+ : \
+ (__EXT_TRIG_CONV__ & (~ADC_EXTERNALTRIGCONV_T20_MASK)) \
+ )
+#endif /* STM32F303xE || STM32F398xx */
+#else
+#define __HAL_ADC_CFGR_EXTSEL(__HANDLE__, __EXT_TRIG_CONV__) \
+ (__EXT_TRIG_CONV__)
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+/**
+ * @brief For devices with 3 ADCs or more: Defines the external trigger source
+ * for injected group according to ADC into common group ADC1&ADC2 or
+ * ADC3&ADC4 (some triggers with same source have different value to
+ * be programmed into ADC JEXTSEL bits of JSQR register).
+ * Note: No risk of trigger bits value of common group ADC1&ADC2
+ * misleading to another trigger at same bits value, because the 3
+ * exceptions below are circular and do not point to any other trigger
+ * with direct treatment, except trigger
+ * ADC_EXTERNALTRIGINJECCONV_T4_CC3 differentiated with SW offset.
+ * For devices with 2 ADCs or less: this macro makes no change.
+ * @param __HANDLE__: ADC handle
+ * @param __EXT_TRIG_INJECTCONV__: External trigger selected for injected group
+ * @retval External trigger to be programmed into JEXTSEL bits of JSQR register
+ */
+#if defined(STM32F303xC) || defined(STM32F303xE) || defined(STM32F398xx) || defined(STM32F358xx)
+#if defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_ADC_JSQR_JEXTSEL(__HANDLE__, __EXT_TRIG_INJECTCONV__) \
+ (( ((((__HANDLE__)->Instance) == ADC3) || (((__HANDLE__)->Instance) == ADC4)) \
+ )? \
+ ( ( (__EXT_TRIG_INJECTCONV__) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO \
+ )? \
+ (ADC3_4_EXTERNALTRIGINJEC_T2_TRGO) \
+ : \
+ ( ( (__EXT_TRIG_INJECTCONV__) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO \
+ )? \
+ (ADC3_4_EXTERNALTRIGINJEC_T4_TRGO) \
+ : \
+ ( ( (__EXT_TRIG_INJECTCONV__) == ADC_EXTERNALTRIGINJECCONV_T8_CC4 \
+ )? \
+ (ADC3_4_EXTERNALTRIGINJEC_T8_CC4) \
+ : \
+ ( ( (__EXT_TRIG_INJECTCONV__) == ADC_EXTERNALTRIGINJECCONV_T4_CC3 \
+ )? \
+ (ADC3_4_EXTERNALTRIGINJEC_T4_CC3) \
+ : \
+ (__EXT_TRIG_INJECTCONV__) \
+ ) \
+ ) \
+ ) \
+ ) \
+ : \
+ (__EXT_TRIG_INJECTCONV__) \
+ )
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+/* Note: Macro including external triggers specific to device STM303xE: using */
+/* Timer20 with ADC trigger input remap. */
+#define __HAL_ADC_JSQR_JEXTSEL(__HANDLE__, __EXT_TRIG_INJECTCONV__) \
+ (( ((((__HANDLE__)->Instance) == ADC3) || (((__HANDLE__)->Instance) == ADC4)) \
+ )? \
+ ( ( (__EXT_TRIG_INJECTCONV__) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO \
+ )? \
+ (ADC3_4_EXTERNALTRIGINJEC_T2_TRGO) \
+ : \
+ ( ( (__EXT_TRIG_INJECTCONV__) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO \
+ )? \
+ (ADC3_4_EXTERNALTRIGINJEC_T4_TRGO) \
+ : \
+ ( ( (__EXT_TRIG_INJECTCONV__) == ADC_EXTERNALTRIGINJECCONV_T8_CC4 \
+ )? \
+ (ADC3_4_EXTERNALTRIGINJEC_T8_CC4) \
+ : \
+ ( ( (__EXT_TRIG_INJECTCONV__) == ADC_EXTERNALTRIGINJECCONV_T4_CC3 \
+ )? \
+ (ADC3_4_EXTERNALTRIGINJEC_T4_CC3) \
+ : \
+ ( ( (__EXT_TRIG_INJECTCONV__) \
+ == ADC_EXTERNALTRIGINJECCONV_T20_TRGO \
+ )? \
+ (ADC3_4_EXTERNALTRIGINJEC_T20_TRGO) \
+ : \
+ ( ( (__EXT_TRIG_INJECTCONV__) \
+ == ADC_EXTERNALTRIGINJECCONV_T20_TRGO2 \
+ )? \
+ (ADC3_4_EXTERNALTRIGINJEC_T1_CC3) \
+ : \
+ (__EXT_TRIG_INJECTCONV__) \
+ ) \
+ ) \
+ ) \
+ ) \
+ ) \
+ ) \
+ : \
+ (__EXT_TRIG_INJECTCONV__ & (~ADC_EXTERNALTRIGCONV_T20_MASK)) \
+ )
+#endif /* STM32F303xE || STM32F398xx */
+#else
+#define __HAL_ADC_JSQR_JEXTSEL(__HANDLE__, __EXT_TRIG_INJECTCONV__) \
+ (__EXT_TRIG_INJECTCONV__)
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+/**
+ * @brief Configure the channel number into offset OFRx register
+ * @param _CHANNEL_: ADC Channel
+ * @retval None
+ */
+#define __HAL_ADC_OFR_CHANNEL(_CHANNEL_) ((_CHANNEL_) << 26)
+
+/**
+ * @brief Configure the channel number into differential mode selection register
+ * @param _CHANNEL_: ADC Channel
+ * @retval None
+ */
+#define __HAL_ADC_DIFSEL_CHANNEL(_CHANNEL_) (1U << (_CHANNEL_))
+
+/**
+ * @brief Calibration factor in differential mode to be set into calibration register
+ * @param _Calibration_Factor_: Calibration factor value
+ * @retval None
+ */
+#define __HAL_ADC_CALFACT_DIFF_SET(_Calibration_Factor_) ((_Calibration_Factor_) << 16)
+
+/**
+ * @brief Calibration factor in differential mode to be retrieved from calibration register
+ * @param _Calibration_Factor_: Calibration factor value
+ * @retval None
+ */
+#define __HAL_ADC_CALFACT_DIFF_GET(_Calibration_Factor_) ((_Calibration_Factor_) >> 16)
+
+/**
+ * @brief Configure the analog watchdog high threshold into registers TR1, TR2 or TR3.
+ * @param _Threshold_: Threshold value
+ * @retval None
+ */
+#define __HAL_ADC_TRX_HIGHTHRESHOLD(_Threshold_) ((_Threshold_) << 16)
+
+/**
+ * @brief Enable the ADC DMA continuous request for ADC multimode.
+ * @param _DMAContReq_MODE_: DMA continuous request mode.
+ * @retval None
+ */
+#define __HAL_ADC_CCR_MULTI_DMACONTREQ(_DMAContReq_MODE_) ((_DMAContReq_MODE_) << 13)
+
+
+/**
+ * @brief Enable the ADC peripheral
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= ADC_CR_ADEN)
+
+/**
+ * @brief Verification of hardware constraints before ADC can be enabled
+ * @param __HANDLE__: ADC handle
+ * @retval SET (ADC can be enabled) or RESET (ADC cannot be enabled)
+ */
+#define __HAL_ADC_ENABLING_CONDITIONS(__HANDLE__) \
+ (( ( ((__HANDLE__)->Instance->CR) & \
+ (ADC_CR_ADCAL | ADC_CR_JADSTP | ADC_CR_ADSTP | ADC_CR_JADSTART | \
+ ADC_CR_ADSTART | ADC_CR_ADDIS | ADC_CR_ADEN ) \
+ ) == RESET \
+ ) ? SET : RESET)
+
+/**
+ * @brief Disable the ADC peripheral
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_DISABLE(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Instance->CR |= ADC_CR_ADDIS; \
+ __HAL_ADC_CLEAR_FLAG((__HANDLE__), (ADC_FLAG_EOSMP | ADC_FLAG_RDY)); \
+ } while(0)
+
+/**
+ * @brief Verification of hardware constraints before ADC can be disabled
+ * @param __HANDLE__: ADC handle
+ * @retval SET (ADC can be disabled) or RESET (ADC cannot be disabled)
+ */
+#define __HAL_ADC_DISABLING_CONDITIONS(__HANDLE__) \
+ (( ( ((__HANDLE__)->Instance->CR) & \
+ (ADC_CR_JADSTART | ADC_CR_ADSTART | ADC_CR_ADEN)) == ADC_CR_ADEN \
+ ) ? SET : RESET)
+
+
+/**
+ * @brief Shift the offset in function of the selected ADC resolution.
+ * Offset has to be left-aligned on bit 11, the LSB (right bits) are set to 0
+ * If resolution 12 bits, no shift.
+ * If resolution 10 bits, shift of 2 ranks on the left.
+ * If resolution 8 bits, shift of 4 ranks on the left.
+ * If resolution 6 bits, shift of 6 ranks on the left.
+ * therefore, shift = (12 - resolution) = 12 - (12- (((RES[1:0]) >> 3)*2))
+ * @param __HANDLE__: ADC handle
+ * @param _Offset_: Value to be shifted
+ * @retval None
+ */
+#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION(__HANDLE__, _Offset_) \
+ ((_Offset_) << ((((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) >> 3)*2))
+
+/**
+ * @brief Shift the AWD1 threshold in function of the selected ADC resolution.
+ * Thresholds have to be left-aligned on bit 11, the LSB (right bits) are set to 0.
+ * If resolution 12 bits, no shift.
+ * If resolution 10 bits, shift of 2 ranks on the left.
+ * If resolution 8 bits, shift of 4 ranks on the left.
+ * If resolution 6 bits, shift of 6 ranks on the left.
+ * therefore, shift = (12 - resolution) = 12 - (12- (((RES[1:0]) >> 3)*2))
+ * @param __HANDLE__: ADC handle
+ * @param _Threshold_: Value to be shifted
+ * @retval None
+ */
+#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION(__HANDLE__, _Threshold_) \
+ ((_Threshold_) << ((((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) >> 3)*2))
+
+/**
+ * @brief Shift the AWD2 and AWD3 threshold in function of the selected ADC resolution.
+ * Thresholds have to be left-aligned on bit 7.
+ * If resolution 12 bits, shift of 4 ranks on the right (the 4 LSB are discarded)
+ * If resolution 10 bits, shift of 2 ranks on the right (the 2 LSB are discarded)
+ * If resolution 8 bits, no shift.
+ * If resolution 6 bits, shift of 2 ranks on the left (the 2 LSB are set to 0)
+ * @param __HANDLE__: ADC handle
+ * @param _Threshold_: Value to be shifted
+ * @retval None
+ */
+#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION(__HANDLE__, _Threshold_) \
+ ( ((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) != (ADC_CFGR_RES_1 | ADC_CFGR_RES_0) ? \
+ ((_Threshold_) >> (4- ((((__HANDLE__)->Instance->CFGR & ADC_CFGR_RES) >> 3)*2))) : \
+ (_Threshold_) << 2 )
+
+/**
+ * @brief Defines if the selected ADC is within ADC common register ADC1_2 or ADC3_4
+ * if available (ADC2, ADC3, ADC4 availability depends on STM32 product)
+ * @param __HANDLE__: ADC handle
+ * @retval Common control register ADC1_2 or ADC3_4
+ */
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_ADC_COMMON_REGISTER(__HANDLE__) \
+ ( ( ((((__HANDLE__)->Instance) == ADC1) || (((__HANDLE__)->Instance) == ADC2)) \
+ )? (ADC1_2_COMMON) : (ADC3_4_COMMON) \
+ )
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xE) || \
+ defined(STM32F302xC) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_ADC_COMMON_REGISTER(__HANDLE__) \
+ (ADC1_2_COMMON)
+#endif /* STM32F302xE || */
+ /* STM32F302xC || */
+ /* STM32F303x8 || STM32F328xx || STM32F334x8 */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __HAL_ADC_COMMON_REGISTER(__HANDLE__) \
+ (ADC1_COMMON)
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+/**
+ * @brief Selection of ADC common register CCR bits MULTI[4:0]corresponding to the selected ADC (applicable for devices with several ADCs)
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_ADC_COMMON_CCR_MULTI(__HANDLE__) \
+ ( ( ((((__HANDLE__)->Instance) == ADC1) || (((__HANDLE__)->Instance) == ADC2)) \
+ )? \
+ (ADC1_2_COMMON->CCR & ADC12_CCR_MULTI) \
+ : \
+ (ADC3_4_COMMON->CCR & ADC34_CCR_MULTI) \
+ )
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xE) || \
+ defined(STM32F302xC) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_ADC_COMMON_CCR_MULTI(__HANDLE__) \
+ (ADC1_2_COMMON->CCR & ADC12_CCR_MULTI)
+#endif /* STM32F302xE || */
+ /* STM32F302xC || */
+ /* STM32F303x8 || STM32F328xx || STM32F334x8 */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __HAL_ADC_COMMON_CCR_MULTI(__HANDLE__) \
+ (RESET)
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+/**
+ * @brief Verification of condition for ADC start conversion: ADC must be in non-multimode, or multimode with handle of ADC master (applicable for devices with several ADCs)
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER(__HANDLE__) \
+ ((__HAL_ADC_COMMON_CCR_MULTI(__HANDLE__) == RESET) || (IS_ADC_MULTIMODE_MASTER_INSTANCE((__HANDLE__)->Instance)))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER(__HANDLE__) \
+ (!RESET)
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+/**
+ * @brief Set handle of the other ADC sharing the same common register ADC1_2 or ADC3_4
+ * if available (ADC2, ADC3, ADC4 availability depends on STM32 product)
+ * @param __HANDLE__: ADC handle
+ * @param __HANDLE_OTHER_ADC__: other ADC handle
+ * @retval None
+ */
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_ADC_COMMON_ADC_OTHER(__HANDLE__, __HANDLE_OTHER_ADC__) \
+ ( ( ((__HANDLE__)->Instance == ADC1) \
+ )? \
+ ((__HANDLE_OTHER_ADC__)->Instance = ADC2) \
+ : \
+ ( ( ((__HANDLE__)->Instance == ADC2) \
+ )? \
+ ((__HANDLE_OTHER_ADC__)->Instance = ADC1) \
+ : \
+ ( ( ((__HANDLE__)->Instance == ADC3) \
+ )? \
+ ((__HANDLE_OTHER_ADC__)->Instance = ADC4) \
+ : \
+ ( ( ((__HANDLE__)->Instance == ADC4) \
+ )? \
+ ((__HANDLE_OTHER_ADC__)->Instance = ADC3) \
+ : \
+ ((__HANDLE_OTHER_ADC__)->Instance = HAL_NULL) \
+ ) \
+ ) \
+ ) \
+ )
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xE) || \
+ defined(STM32F302xC) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_ADC_COMMON_ADC_OTHER(__HANDLE__, __HANDLE_OTHER_ADC__) \
+ ( ( ((__HANDLE__)->Instance == ADC1) \
+ )? \
+ ((__HANDLE_OTHER_ADC__)->Instance = ADC2) \
+ : \
+ ((__HANDLE_OTHER_ADC__)->Instance = ADC1) \
+ )
+#endif /* STM32F302xE || */
+ /* STM32F302xC || */
+ /* STM32F303x8 || STM32F328xx || STM32F334x8 */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __HAL_ADC_COMMON_ADC_OTHER(__HANDLE__, __HANDLE_OTHER_ADC__) \
+ ((__HANDLE_OTHER_ADC__)->Instance = HAL_NULL)
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+/**
+ * @brief Set handle of the ADC slave associated to the ADC master
+ * if available (ADC2, ADC3, ADC4 availability depends on STM32 product)
+ * @param __HANDLE_MASTER__: ADC master handle
+ * @param __HANDLE_SLAVE__: ADC slave handle
+ * @retval None
+ */
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_ADC_MULTI_SLAVE(__HANDLE_MASTER__, __HANDLE_SLAVE__) \
+ ( ( ((__HANDLE_MASTER__)->Instance == ADC1) \
+ )? \
+ ((__HANDLE_SLAVE__)->Instance = ADC2) \
+ : \
+ ( ( ((__HANDLE_MASTER__)->Instance == ADC3) \
+ )? \
+ ((__HANDLE_SLAVE__)->Instance = ADC4) \
+ : \
+ ((__HANDLE_SLAVE__)->Instance = HAL_NULL) \
+ ) \
+ )
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xE) || \
+ defined(STM32F302xC) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_ADC_MULTI_SLAVE(__HANDLE_MASTER__, __HANDLE_SLAVE__) \
+ ( ( ((__HANDLE_MASTER__)->Instance == ADC1) \
+ )? \
+ ((__HANDLE_SLAVE__)->Instance = ADC2) \
+ : \
+ ( HAL_NULL ) \
+ )
+#endif /* STM32F302xE || */
+ /* STM32F302xC || */
+ /* STM32F303x8 || STM32F328xx || STM32F334x8 */
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/**
+ * @brief Set ADC number of conversions into regular channel sequence length.
+ * @param _NbrOfConversion_: Regular channel sequence length
+ * @retval None
+ */
+#define __HAL_ADC_SQR1_L(_NbrOfConversion_) (((_NbrOfConversion_) - (uint8_t)1) << 20)
+
+/**
+ * @brief Set the ADC's sample time for channel numbers between 10 and 18.
+ * @param _SAMPLETIME_: Sample time parameter.
+ * @param _CHANNELNB_: Channel number.
+ * @retval None
+ */
+#define __HAL_ADC_SMPR1(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * ((_CHANNELNB_) - 10)))
+
+/**
+ * @brief Set the ADC's sample time for channel numbers between 0 and 9.
+ * @param _SAMPLETIME_: Sample time parameter.
+ * @param _CHANNELNB_: Channel number.
+ * @retval None
+ */
+#define __HAL_ADC_SMPR2(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * (_CHANNELNB_)))
+
+/**
+ * @brief Set the selected regular channel rank for rank between 1 and 6.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define __HAL_ADC_SQR3_RK(_CHANNELNB_, _RANKNB_) ((_CHANNELNB_) << (5 * ((_RANKNB_) - 1)))
+
+/**
+ * @brief Set the selected regular channel rank for rank between 7 and 12.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define __HAL_ADC_SQR2_RK(_CHANNELNB_, _RANKNB_) ((_CHANNELNB_) << (5 * ((_RANKNB_) - 7)))
+
+/**
+ * @brief Set the selected regular channel rank for rank between 13 and 16.
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @retval None
+ */
+#define __HAL_ADC_SQR1_RK(_CHANNELNB_, _RANKNB_) ((_CHANNELNB_) << (5 * ((_RANKNB_) - 13)))
+
+/**
+ * @brief Set the injected sequence length.
+ * @param _JSQR_JL_: Sequence length.
+ * @retval None
+ */
+#define __HAL_ADC_JSQR_JL(_JSQR_JL_) (((_JSQR_JL_) -1) << 20)
+
+/**
+ * @brief Set the selected injected Channel rank (channels sequence starting from 4-JL)
+ * @param _CHANNELNB_: Channel number.
+ * @param _RANKNB_: Rank number.
+ * @param _JSQR_JL_: Sequence length.
+ * @retval None
+ */
+#define __HAL_ADC_JSQR_RK(_CHANNELNB_, _RANKNB_, _JSQR_JL_) \
+ ((_CHANNELNB_) << (5 * ((4 - ((_JSQR_JL_) - (_RANKNB_))) - 1)))
+
+/**
+ * @brief Enable ADC continuous conversion mode.
+ * @param _CONTINUOUS_MODE_: Continuous mode.
+ * @retval None
+ */
+#define __HAL_ADC_CR2_CONTINUOUS(_CONTINUOUS_MODE_) ((_CONTINUOUS_MODE_) << 1)
+
+/**
+ * @brief Configures the number of discontinuous conversions for the regular group channels.
+ * @param _NBR_DISCONTINUOUS_CONV_: Number of discontinuous conversions.
+ * @retval None
+ */
+#define __HAL_ADC_CR1_DISCONTINUOUS_NUM(_NBR_DISCONTINUOUS_CONV_) (((_NBR_DISCONTINUOUS_CONV_) - 1) << 13)
+
+/**
+ * @brief Enable ADC scan mode to convert multiple ranks with sequencer.
+ * @param _SCAN_MODE_: Scan conversion mode.
+ * @retval None
+ */
+#define __HAL_ADC_CR1_SCAN(_SCAN_MODE_) \
+ ( ( (_SCAN_MODE_) == (ADC_SCAN_ENABLE) \
+ )? (ADC_CR1_SCAN) : (0x00000000) \
+ )
+
+/**
+ * @brief Calibration factor in differential mode to be set into calibration register
+ * @param _Calibration_Factor_: Calibration factor value
+ * @retval None
+ */
+#define __HAL_ADC_CALFACT_DIFF_SET(_Calibration_Factor_) ((_Calibration_Factor_) << 16)
+
+/**
+ * @brief Calibration factor in differential mode to be retrieved from calibration register
+ * @param _Calibration_Factor_: Calibration factor value
+ * @retval None
+ */
+#define __HAL_ADC_CALFACT_DIFF_GET(_Calibration_Factor_) ((_Calibration_Factor_) >> 16)
+
+
+/**
+ * @brief Get the maximum ADC conversion cycles on all channels.
+ * Returns the selected sampling time + conversion time (12.5 ADC clock cycles)
+ * Approximation of sampling time within 4 ranges, returns the higher value:
+ * below 7.5 cycles {1.5 cycle; 7.5 cycles},
+ * between 13.5 cycles and 28.5 cycles {13.5 cycles; 28.5 cycles}
+ * between 41.5 cycles and 71.5 cycles {41.5 cycles; 55.5 cycles; 71.5cycles}
+ * equal to 239.5 cycles
+ * Unit: ADC clock cycles
+ * @param __HANDLE__: ADC handle
+ * @retval ADC conversion cycles on all channels
+ */
+#define __HAL_ADC_CONVCYCLES_MAX_RANGE(__HANDLE__) \
+ (( (((__HANDLE__)->Instance->SMPR2 & ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2) == RESET) && \
+ (((__HANDLE__)->Instance->SMPR1 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2) == RESET) ) ? \
+ \
+ (( (((__HANDLE__)->Instance->SMPR2 & ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1) == RESET) && \
+ (((__HANDLE__)->Instance->SMPR1 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1) == RESET) ) ? \
+ ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_7CYCLES5 : ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_28CYCLES5) \
+ : \
+ ((((((__HANDLE__)->Instance->SMPR2 & ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT1) == RESET) && \
+ (((__HANDLE__)->Instance->SMPR1 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT1) == RESET)) || \
+ ((((__HANDLE__)->Instance->SMPR2 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0) == RESET) && \
+ (((__HANDLE__)->Instance->SMPR1 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT0) == RESET))) ? \
+ ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_71CYCLES5 : ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_239CYCLES5) \
+ )
+
+/**
+ * @brief Get the total ADC clock prescaler (APB2 prescaler x ADC prescaler)
+ * from system clock configuration register.
+ * Approximation within 3 ranges, returns the higher value:
+ * total prescaler minimum: 2 (ADC presc 2, APB2 presc 0)
+ * total prescaler 32 (ADC presc 0 and APB2 presc all, or
+ * ADC presc {4, 6, 8} and APB2 presc {0, 2, 4})
+ * total prescaler maximum: 128 (ADC presc {4, 6, 8} and APB2 presc {8, 16})
+ * Unit: none (prescaler factor)
+ * @param __HANDLE__: ADC handle
+ * @retval ADC and APB2 prescaler factor
+ */
+#define __HAL_ADC_CLOCK_PRECSALER_RANGE(__HANDLE__) \
+ (( (RCC->CFGR & (RCC_CFGR_ADCPRE_1 | RCC_CFGR_ADCPRE_0)) == RESET) ? \
+ (( (RCC->CFGR & RCC_CFGR_PPRE2_2) == RESET) ? 2 : 32 ) \
+ : \
+ (( (RCC->CFGR & RCC_CFGR_PPRE2_1) == RESET) ? 32 : 128 ) \
+ )
+
+/**
+ * @brief Get the ADC clock prescaler from system clock configuration register.
+ * @retval None
+ */
+#define __HAL_ADC_GET_CLOCK_PRESCALER() (((RCC->CFGR & RCC_CFGR_ADCPRE) >> 14) +1)
+
+/**
+ * @brief Enable the ADC peripheral (if not already enable to not trig a conversion)
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_ENABLE(__HANDLE__) \
+ (__HANDLE__)->Instance->CR2 |= ADC_CR2_ADON
+
+/**
+ * @brief Disable the ADC peripheral
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#define __HAL_ADC_DISABLE(__HANDLE__) \
+ (__HANDLE__)->Instance->CR2 &= ~ADC_CR2_ADON
+
+#endif /* STM32F373xC || STM32F378xx */
+/**
+ * @}
+ */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup ADCEx_Exported_Functions ADC Extended Exported Functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions *********************************/
+
+/** @addtogroup ADCEx_Exported_Functions_Group2 Extended Input and Output operation functions
+ * @brief Extended IO operation functions
+ * @{
+ */
+/* I/O operation functions ****************************************************/
+
+/* ADC calibration */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(struct __ADC_HandleTypeDef* hadc, uint32_t SingleDiff);
+uint32_t HAL_ADCEx_Calibration_GetValue(struct __ADC_HandleTypeDef *hadc, uint32_t SingleDiff);
+HAL_StatusTypeDef HAL_ADCEx_Calibration_SetValue(struct __ADC_HandleTypeDef *hadc, uint32_t SingleDiff, uint32_t CalibrationFactor);
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(struct __ADC_HandleTypeDef* hadc);
+#endif /* STM32F373xC || STM32F378xx */
+
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart(struct __ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop(struct __ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(struct __ADC_HandleTypeDef* hadc, uint32_t Timeout);
+
+/* Non-blocking mode: Interruption */
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(struct __ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(struct __ADC_HandleTypeDef* hadc);
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/* ADC multimode */
+HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(struct __ADC_HandleTypeDef *hadc, uint32_t *pData, uint32_t Length);
+HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(struct __ADC_HandleTypeDef *hadc);
+uint32_t HAL_ADCEx_MultiModeGetValue(struct __ADC_HandleTypeDef *hadc);
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+/* ADC retrieve conversion value intended to be used with polling or interruption */
+uint32_t HAL_ADCEx_InjectedGetValue(struct __ADC_HandleTypeDef* hadc, uint32_t InjectedRank);
+
+/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption) */
+void HAL_ADCEx_InjectedConvCpltCallback(struct __ADC_HandleTypeDef* hadc);
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+void HAL_ADCEx_InjectedQueueOverflowCallback(struct __ADC_HandleTypeDef* hadc);
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+/**
+ * @}
+ */
+
+/** @addtogroup ADCEx_Exported_Functions_Group3 Extended Peripheral Control functions
+ * @brief Extended Peripheral Control functions
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(struct __ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected);
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(struct __ADC_HandleTypeDef *hadc, ADC_MultiModeTypeDef *multimode);
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F3xx_ADC_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_can.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,822 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_can.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of CAN HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_CAN_H
+#define __STM32F3xx_CAN_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F302x8) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CAN
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CAN_Exported_Types CAN Exported Types
+ * @{
+ */
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_CAN_STATE_RESET = 0x00, /*!< CAN not yet initialized or disabled */
+ HAL_CAN_STATE_READY = 0x01, /*!< CAN initialized and ready for use */
+ HAL_CAN_STATE_BUSY = 0x02, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_TX = 0x12, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_RX = 0x22, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_BUSY_TX_RX = 0x32, /*!< CAN process is ongoing */
+ HAL_CAN_STATE_TIMEOUT = 0x03, /*!< CAN in Timeout state */
+ HAL_CAN_STATE_ERROR = 0x04 /*!< CAN error state */
+
+}HAL_CAN_StateTypeDef;
+
+/**
+ * @brief HAL CAN Error Code structure definition
+ */
+typedef enum
+{
+ HAL_CAN_ERROR_NONE = 0x00, /*!< No error */
+ HAL_CAN_ERROR_EWG = 0x01, /*!< EWG error */
+ HAL_CAN_ERROR_EPV = 0x02, /*!< EPV error */
+ HAL_CAN_ERROR_BOF = 0x04, /*!< BOF error */
+ HAL_CAN_ERROR_STF = 0x08, /*!< Stuff error */
+ HAL_CAN_ERROR_FOR = 0x10, /*!< Form error */
+ HAL_CAN_ERROR_ACK = 0x20, /*!< Acknowledgment error */
+ HAL_CAN_ERROR_BR = 0x40, /*!< Bit recessive */
+ HAL_CAN_ERROR_BD = 0x80, /*!< LEC dominant */
+ HAL_CAN_ERROR_CRC = 0x100 /*!< LEC transfer error */
+}HAL_CAN_ErrorTypeDef;
+
+/**
+ * @brief CAN init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the length of a time quantum.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 1024. */
+
+ uint32_t Mode; /*!< Specifies the CAN operating mode.
+ This parameter can be a value of @ref CAN_operating_mode */
+
+ uint32_t SJW; /*!< Specifies the maximum number of time quanta
+ the CAN hardware is allowed to lengthen or
+ shorten a bit to perform resynchronization.
+ This parameter can be a value of @ref CAN_synchronisation_jump_width */
+
+ uint32_t BS1; /*!< Specifies the number of time quanta in Bit Segment 1.
+ This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */
+
+ uint32_t BS2; /*!< Specifies the number of time quanta in Bit Segment 2.
+ This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */
+
+ uint32_t TTCM; /*!< Enable or disable the time triggered communication mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t ABOM; /*!< Enable or disable the automatic bus-off management.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t AWUM; /*!< Enable or disable the automatic wake-up mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t NART; /*!< Enable or disable the non-automatic retransmission mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t RFLM; /*!< Enable or disable the Receive FIFO Locked mode.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t TXFP; /*!< Enable or disable the transmit FIFO priority.
+ This parameter can be set to ENABLE or DISABLE. */
+}CAN_InitTypeDef;
+
+/**
+ * @brief CAN filter configuration structure definition
+ */
+typedef struct
+{
+ uint32_t FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit
+ configuration, first one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit
+ configuration, second one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number,
+ according to the mode (MSBs for a 32-bit configuration,
+ first one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t FilterMaskIdLow; /*!< Specifies the filter mask number or identification number,
+ according to the mode (LSBs for a 32-bit configuration,
+ second one for a 16-bit configuration).
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter.
+ This parameter can be a value of @ref CAN_filter_FIFO */
+
+ uint32_t FilterNumber; /*!< Specifies the filter which will be initialized.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 27. */
+
+ uint32_t FilterMode; /*!< Specifies the filter mode to be initialized.
+ This parameter can be a value of @ref CAN_filter_mode */
+
+ uint32_t FilterScale; /*!< Specifies the filter scale.
+ This parameter can be a value of @ref CAN_filter_scale */
+
+ uint32_t FilterActivation; /*!< Enable or disable the filter.
+ This parameter can be set to ENABLE or DISABLE. */
+
+ uint32_t BankNumber; /*!< Select the start slave bank filter
+ This parameter must be a number between Min_Data = 0 and Max_Data = 28. */
+
+}CAN_FilterConfTypeDef;
+
+/**
+ * @brief CAN Tx message structure definition
+ */
+typedef struct
+{
+ uint32_t StdId; /*!< Specifies the standard identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF. */
+
+ uint32_t ExtId; /*!< Specifies the extended identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF. */
+
+ uint32_t IDE; /*!< Specifies the type of identifier for the message that will be transmitted.
+ This parameter can be a value of @ref CAN_identifier_type */
+
+ uint32_t RTR; /*!< Specifies the type of frame for the message that will be transmitted.
+ This parameter can be a value of @ref CAN_remote_transmission_request */
+
+ uint32_t DLC; /*!< Specifies the length of the frame that will be transmitted.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 8. */
+
+ uint32_t Data[8]; /*!< Contains the data to be transmitted.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF. */
+
+}CanTxMsgTypeDef;
+
+/**
+ * @brief CAN Rx message structure definition
+ */
+typedef struct
+{
+ uint32_t StdId; /*!< Specifies the standard identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF. */
+
+ uint32_t ExtId; /*!< Specifies the extended identifier.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF. */
+
+ uint32_t IDE; /*!< Specifies the type of identifier for the message that will be received.
+ This parameter can be a value of @ref CAN_identifier_type */
+
+ uint32_t RTR; /*!< Specifies the type of frame for the received message.
+ This parameter can be a value of @ref CAN_remote_transmission_request */
+
+ uint32_t DLC; /*!< Specifies the length of the frame that will be received.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 8. */
+
+ uint32_t Data[8]; /*!< Contains the data to be received.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF. */
+
+ uint32_t FMI; /*!< Specifies the index of the filter the message stored in the mailbox passes through.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF. */
+
+ uint32_t FIFONumber; /*!< Specifies the receive FIFO number.
+ This parameter can be CAN_FIFO0 or CAN_FIFO1 */
+
+}CanRxMsgTypeDef;
+
+/**
+ * @brief CAN handle Structure definition
+ */
+typedef struct
+{
+ CAN_TypeDef *Instance; /*!< Register base address */
+
+ CAN_InitTypeDef Init; /*!< CAN required parameters */
+
+ CanTxMsgTypeDef* pTxMsg; /*!< Pointer to transmit structure */
+
+ CanRxMsgTypeDef* pRxMsg; /*!< Pointer to reception structure */
+
+ HAL_LockTypeDef Lock; /*!< CAN locking object */
+
+ __IO HAL_CAN_StateTypeDef State; /*!< CAN communication state */
+
+ __IO HAL_CAN_ErrorTypeDef ErrorCode; /*!< CAN Error code */
+
+}CAN_HandleTypeDef;
+/**
+ * @}
+ */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CAN_Exported_Constants CAN Exported Constants
+ * @{
+ */
+
+/** @defgroup CAN_InitStatus CAN initialization Status
+ * @{
+ */
+#define CAN_INITSTATUS_FAILED ((uint32_t)0x00000000) /*!< CAN initialization failed */
+#define CAN_INITSTATUS_SUCCESS ((uint32_t)0x00000001) /*!< CAN initialization OK */
+/**
+ * @}
+ */
+
+/** @defgroup CAN_operating_mode CAN Operating Mode
+ * @{
+ */
+#define CAN_MODE_NORMAL ((uint32_t)0x00000000) /*!< Normal mode */
+#define CAN_MODE_LOOPBACK ((uint32_t)CAN_BTR_LBKM) /*!< Loopback mode */
+#define CAN_MODE_SILENT ((uint32_t)CAN_BTR_SILM) /*!< Silent mode */
+#define CAN_MODE_SILENT_LOOPBACK ((uint32_t)(CAN_BTR_LBKM | CAN_BTR_SILM)) /*!< Loopback combined with silent mode */
+
+#define IS_CAN_MODE(MODE) (((MODE) == CAN_MODE_NORMAL) || \
+ ((MODE) == CAN_MODE_LOOPBACK)|| \
+ ((MODE) == CAN_MODE_SILENT) || \
+ ((MODE) == CAN_MODE_SILENT_LOOPBACK))
+/**
+ * @}
+ */
+
+
+/** @defgroup CAN_synchronisation_jump_width CAN Synchronization Jump Width
+ * @{
+ */
+#define CAN_SJW_1TQ ((uint32_t)0x00000000) /*!< 1 time quantum */
+#define CAN_SJW_2TQ ((uint32_t)CAN_BTR_SJW_0) /*!< 2 time quantum */
+#define CAN_SJW_3TQ ((uint32_t)CAN_BTR_SJW_1) /*!< 3 time quantum */
+#define CAN_SJW_4TQ ((uint32_t)CAN_BTR_SJW) /*!< 4 time quantum */
+
+#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ)|| \
+ ((SJW) == CAN_SJW_3TQ) || ((SJW) == CAN_SJW_4TQ))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_1 CAN Time Quantum in Bit Segment 1
+ * @{
+ */
+#define CAN_BS1_1TQ ((uint32_t)0x00000000) /*!< 1 time quantum */
+#define CAN_BS1_2TQ ((uint32_t)CAN_BTR_TS1_0) /*!< 2 time quantum */
+#define CAN_BS1_3TQ ((uint32_t)CAN_BTR_TS1_1) /*!< 3 time quantum */
+#define CAN_BS1_4TQ ((uint32_t)(CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 4 time quantum */
+#define CAN_BS1_5TQ ((uint32_t)CAN_BTR_TS1_2) /*!< 5 time quantum */
+#define CAN_BS1_6TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 6 time quantum */
+#define CAN_BS1_7TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 7 time quantum */
+#define CAN_BS1_8TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 8 time quantum */
+#define CAN_BS1_9TQ ((uint32_t)CAN_BTR_TS1_3) /*!< 9 time quantum */
+#define CAN_BS1_10TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_0)) /*!< 10 time quantum */
+#define CAN_BS1_11TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1)) /*!< 11 time quantum */
+#define CAN_BS1_12TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 12 time quantum */
+#define CAN_BS1_13TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2)) /*!< 13 time quantum */
+#define CAN_BS1_14TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 14 time quantum */
+#define CAN_BS1_15TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 15 time quantum */
+#define CAN_BS1_16TQ ((uint32_t)CAN_BTR_TS1) /*!< 16 time quantum */
+
+#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16TQ)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_time_quantum_in_bit_segment_2 CAN Time Quantum in Bit Segment 2
+ * @{
+ */
+#define CAN_BS2_1TQ ((uint32_t)0x00000000) /*!< 1 time quantum */
+#define CAN_BS2_2TQ ((uint32_t)CAN_BTR_TS2_0) /*!< 2 time quantum */
+#define CAN_BS2_3TQ ((uint32_t)CAN_BTR_TS2_1) /*!< 3 time quantum */
+#define CAN_BS2_4TQ ((uint32_t)(CAN_BTR_TS2_1 | CAN_BTR_TS2_0)) /*!< 4 time quantum */
+#define CAN_BS2_5TQ ((uint32_t)CAN_BTR_TS2_2) /*!< 5 time quantum */
+#define CAN_BS2_6TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_0)) /*!< 6 time quantum */
+#define CAN_BS2_7TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_1)) /*!< 7 time quantum */
+#define CAN_BS2_8TQ ((uint32_t)CAN_BTR_TS2) /*!< 8 time quantum */
+
+#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8TQ)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_clock_prescaler CAN Clock Prescaler
+ * @{
+ */
+#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_number CAN Filter Number
+ * @{
+ */
+#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_mode CAN Filter Mode
+ * @{
+ */
+#define CAN_FILTERMODE_IDMASK ((uint8_t)0x00) /*!< Identifier mask mode */
+#define CAN_FILTERMODE_IDLIST ((uint8_t)0x01) /*!< Identifier list mode */
+
+#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \
+ ((MODE) == CAN_FILTERMODE_IDLIST))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_scale CAN Filter Scale
+ * @{
+ */
+#define CAN_FILTERSCALE_16BIT ((uint8_t)0x00) /*!< Two 16-bit filters */
+#define CAN_FILTERSCALE_32BIT ((uint8_t)0x01) /*!< One 32-bit filter */
+
+#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \
+ ((SCALE) == CAN_FILTERSCALE_32BIT))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_filter_FIFO CAN Filter FIFO
+ * @{
+ */
+#define CAN_FILTER_FIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */
+#define CAN_FILTER_FIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */
+
+#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FILTER_FIFO0) || \
+ ((FIFO) == CAN_FILTER_FIFO1))
+
+/* Legacy defines */
+#define CAN_FilterFIFO0 CAN_FILTER_FIFO0
+#define CAN_FilterFIFO1 CAN_FILTER_FIFO1
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Start_bank_filter_for_slave_CAN CAN Start Bank Filter For Slave CAN
+ * @{
+ */
+#define IS_CAN_BANKNUMBER(BANKNUMBER) ((BANKNUMBER) <= 28)
+/**
+ * @}
+ */
+
+/** @defgroup CAN_Tx CAN Tx
+ * @{
+ */
+#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02))
+#define IS_CAN_STDID(STDID) ((STDID) <= ((uint32_t)0x7FF))
+#define IS_CAN_EXTID(EXTID) ((EXTID) <= ((uint32_t)0x1FFFFFFF))
+#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_identifier_type CAN Identifier Type
+ * @{
+ */
+#define CAN_ID_STD ((uint32_t)0x00000000) /*!< Standard Id */
+#define CAN_ID_EXT ((uint32_t)0x00000004) /*!< Extended Id */
+#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_ID_STD) || \
+ ((IDTYPE) == CAN_ID_EXT))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_remote_transmission_request CAN Remote Transmission Request
+ * @{
+ */
+#define CAN_RTR_DATA ((uint32_t)0x00000000) /*!< Data frame */
+#define CAN_RTR_REMOTE ((uint32_t)0x00000002) /*!< Remote frame */
+#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE))
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_transmit_constants CAN Transmit Constants
+ * @{
+ */
+#define CAN_TXSTATUS_FAILED ((uint8_t)0x00) /*!< CAN transmission failed */
+#define CAN_TXSTATUS_OK ((uint8_t)0x01) /*!< CAN transmission succeeded */
+#define CAN_TXSTATUS_PENDING ((uint8_t)0x02) /*!< CAN transmission pending */
+#define CAN_TXSTATUS_NOMAILBOX ((uint8_t)0x04) /*!< CAN cell did not provide CAN_TxStatus_NoMailBox */
+
+/**
+ * @}
+ */
+
+/** @defgroup CAN_receive_FIFO_number_constants CAN Receive FIFO Number
+ * @{
+ */
+#define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */
+#define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */
+
+#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1))
+/**
+ * @}
+ */
+
+/** @defgroup CAN_flags CAN Flags
+ * @{
+ */
+/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus()
+ and CAN_ClearFlag() functions. */
+/* If the flag is 0x1XXXXXXX, it means that it can only be used with
+ CAN_GetFlagStatus() function. */
+
+/* Transmit Flags */
+#define CAN_FLAG_RQCP0 ((uint32_t)0x00000500) /*!< Request MailBox0 flag */
+#define CAN_FLAG_RQCP1 ((uint32_t)0x00000508) /*!< Request MailBox1 flag */
+#define CAN_FLAG_RQCP2 ((uint32_t)0x00000510) /*!< Request MailBox2 flag */
+#define CAN_FLAG_TXOK0 ((uint32_t)0x00000501) /*!< Transmission OK MailBox0 flag */
+#define CAN_FLAG_TXOK1 ((uint32_t)0x00000509) /*!< Transmission OK MailBox1 flag */
+#define CAN_FLAG_TXOK2 ((uint32_t)0x00000511) /*!< Transmission OK MailBox2 flag */
+#define CAN_FLAG_TME0 ((uint32_t)0x0000051A) /*!< Transmit mailbox 0 empty flag */
+#define CAN_FLAG_TME1 ((uint32_t)0x0000051B) /*!< Transmit mailbox 0 empty flag */
+#define CAN_FLAG_TME2 ((uint32_t)0x0000051C) /*!< Transmit mailbox 0 empty flag */
+
+/* Receive Flags */
+#define CAN_FLAG_FF0 ((uint32_t)0x00000203) /*!< FIFO 0 Full flag */
+#define CAN_FLAG_FOV0 ((uint32_t)0x00000204) /*!< FIFO 0 Overrun flag */
+
+#define CAN_FLAG_FF1 ((uint32_t)0x00000403) /*!< FIFO 1 Full flag */
+#define CAN_FLAG_FOV1 ((uint32_t)0x00000404) /*!< FIFO 1 Overrun flag */
+
+/* Operating Mode Flags */
+#define CAN_FLAG_WKU ((uint32_t)0x00000103) /*!< Wake up flag */
+#define CAN_FLAG_SLAK ((uint32_t)0x00000101) /*!< Sleep acknowledge flag */
+#define CAN_FLAG_SLAKI ((uint32_t)0x00000104) /*!< Sleep acknowledge flag */
+/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible.
+ In this case the SLAK bit can be polled.*/
+
+/* Error Flags */
+#define CAN_FLAG_EWG ((uint32_t)0x00000300) /*!< Error warning flag */
+#define CAN_FLAG_EPV ((uint32_t)0x00000301) /*!< Error passive flag */
+#define CAN_FLAG_BOF ((uint32_t)0x00000302) /*!< Bus-Off flag */
+
+#define IS_CAN_GET_FLAG(FLAG) (((FLAG) == CAN_FLAG_RQCP2) || ((FLAG) == CAN_FLAG_BOF) || \
+ ((FLAG) == CAN_FLAG_EPV) || ((FLAG) == CAN_FLAG_EWG) || \
+ ((FLAG) == CAN_FLAG_WKU) || ((FLAG) == CAN_FLAG_FOV0) || \
+ ((FLAG) == CAN_FLAG_FF0) || ((FLAG) == CAN_FLAG_SLAK) || \
+ ((FLAG) == CAN_FLAG_FOV1) || ((FLAG) == CAN_FLAG_FF1) || \
+ ((FLAG) == CAN_FLAG_RQCP1) || ((FLAG) == CAN_FLAG_RQCP0))
+
+
+#define IS_CAN_CLEAR_FLAG(FLAG)(((FLAG) == CAN_FLAG_RQCP2) || ((FLAG) == CAN_FLAG_RQCP1) || \
+ ((FLAG) == CAN_FLAG_RQCP0) || ((FLAG) == CAN_FLAG_FF0) || \
+ ((FLAG) == CAN_FLAG_FOV0) || ((FLAG) == CAN_FLAG_FF1) || \
+ ((FLAG) == CAN_FLAG_FOV1) || ((FLAG) == CAN_FLAG_WKU))
+/**
+ * @}
+ */
+
+
+/** @defgroup CAN_interrupts CAN Interrupts
+ * @{
+ */
+#define CAN_IT_TME ((uint32_t)CAN_IER_TMEIE) /*!< Transmit mailbox empty interrupt */
+
+/* Receive Interrupts */
+#define CAN_IT_FMP0 ((uint32_t)CAN_IER_FMPIE0) /*!< FIFO 0 message pending interrupt */
+#define CAN_IT_FF0 ((uint32_t)CAN_IER_FFIE0) /*!< FIFO 0 full interrupt */
+#define CAN_IT_FOV0 ((uint32_t)CAN_IER_FOVIE0) /*!< FIFO 0 overrun interrupt */
+#define CAN_IT_FMP1 ((uint32_t)CAN_IER_FMPIE1) /*!< FIFO 1 message pending interrupt */
+#define CAN_IT_FF1 ((uint32_t)CAN_IER_FFIE1) /*!< FIFO 1 full interrupt */
+#define CAN_IT_FOV1 ((uint32_t)CAN_IER_FOVIE1) /*!< FIFO 1 overrun interrupt */
+
+/* Operating Mode Interrupts */
+#define CAN_IT_WKU ((uint32_t)CAN_IER_WKUIE) /*!< Wake-up interrupt */
+#define CAN_IT_SLK ((uint32_t)CAN_IER_SLKIE) /*!< Sleep acknowledge interrupt */
+
+/* Error Interrupts */
+#define CAN_IT_EWG ((uint32_t)CAN_IER_EWGIE) /*!< Error warning interrupt */
+#define CAN_IT_EPV ((uint32_t)CAN_IER_EPVIE) /*!< Error passive interrupt */
+#define CAN_IT_BOF ((uint32_t)CAN_IER_BOFIE) /*!< Bus-off interrupt */
+#define CAN_IT_LEC ((uint32_t)CAN_IER_LECIE) /*!< Last error code interrupt */
+#define CAN_IT_ERR ((uint32_t)CAN_IER_ERRIE) /*!< Error Interrupt */
+
+/* Flags named as Interrupts : kept only for FW compatibility */
+#define CAN_IT_RQCP0 CAN_IT_TME
+#define CAN_IT_RQCP1 CAN_IT_TME
+#define CAN_IT_RQCP2 CAN_IT_TME
+
+#define IS_CAN_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FMP0) ||\
+ ((IT) == CAN_IT_FF0) || ((IT) == CAN_IT_FOV0) ||\
+ ((IT) == CAN_IT_FMP1) || ((IT) == CAN_IT_FF1) ||\
+ ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG) ||\
+ ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\
+ ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\
+ ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK))
+
+#define IS_CAN_CLEAR_IT(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FF0) ||\
+ ((IT) == CAN_IT_FOV0)|| ((IT) == CAN_IT_FF1) ||\
+ ((IT) == CAN_IT_FOV1)|| ((IT) == CAN_IT_EWG) ||\
+ ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\
+ ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\
+ ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK))
+/**
+ * @}
+ */
+
+/* Time out for INAK bit */
+#define INAK_TIMEOUT ((uint32_t)0x00FFFFFF)
+/* Time out for SLAK bit */
+#define SLAK_TIMEOUT ((uint32_t)0x00FFFFFF)
+
+/* Mailboxes definition */
+#define CAN_TXMAILBOX_0 ((uint8_t)0x00)
+#define CAN_TXMAILBOX_1 ((uint8_t)0x01)
+#define CAN_TXMAILBOX_2 ((uint8_t)0x02)
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup CAN_Exported_Macro CAN Exported Macros
+ * @{
+ */
+
+/** @brief Reset CAN handle state
+ * @param __HANDLE__: CAN handle.
+ * @retval None
+ */
+#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CAN_STATE_RESET)
+
+/**
+ * @brief Enable the specified CAN interrupts
+ * @param __HANDLE__: CAN handle.
+ * @param __INTERRUPT__: CAN Interrupt.
+ * @retval None.
+ */
+#define __HAL_CAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified CAN interrupts
+ * @param __HANDLE__: CAN handle.
+ * @param __INTERRUPT__: CAN Interrupt.
+ * @retval None.
+ */
+#define __HAL_CAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__))
+
+/**
+ * @brief Return the number of pending received messages.
+ * @param __HANDLE__: CAN handle.
+ * @param __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+ * @retval The number of pending message.
+ */
+#define __HAL_CAN_MSG_PENDING(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
+((uint8_t)((__HANDLE__)->Instance->RF0R&(uint32_t)0x03)) : ((uint8_t)((__HANDLE__)->Instance->RF1R&(uint32_t)0x03)))
+
+/** @brief Check whether the specified CAN flag is set or not.
+ * @param __HANDLE__: specifies the CAN Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_TSR_RQCP0: Request MailBox0 Flag
+ * @arg CAN_TSR_RQCP1: Request MailBox1 Flag
+ * @arg CAN_TSR_RQCP2: Request MailBox2 Flag
+ * @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
+ * @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
+ * @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
+ * @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
+ * @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
+ * @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
+ * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
+ * @arg CAN_FLAG_FF0: FIFO 0 Full Flag
+ * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
+ * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
+ * @arg CAN_FLAG_FF1: FIFO 1 Full Flag
+ * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
+ * @arg CAN_FLAG_WKU: Wake up Flag
+ * @arg CAN_FLAG_SLAK: Sleep acknowledge Flag
+ * @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
+ * @arg CAN_FLAG_EWG: Error Warning Flag
+ * @arg CAN_FLAG_EPV: Error Passive Flag
+ * @arg CAN_FLAG_BOF: Bus-Off Flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define CAN_FLAG_MASK ((uint32_t)0x000000FF)
+#define __HAL_CAN_GET_FLAG(__HANDLE__, __FLAG__) \
+((((__FLAG__) >> 8) == 5)? ((((__HANDLE__)->Instance->TSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 2)? ((((__HANDLE__)->Instance->RF0R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 4)? ((((__HANDLE__)->Instance->RF1R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8) == 1)? ((((__HANDLE__)->Instance->MSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ ((((__HANDLE__)->Instance->ESR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))))
+
+/** @brief Clear the specified CAN pending flag.
+ * @param __HANDLE__: specifies the CAN Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_TSR_RQCP0: Request MailBox0 Flag
+ * @arg CAN_TSR_RQCP1: Request MailBox1 Flag
+ * @arg CAN_TSR_RQCP2: Request MailBox2 Flag
+ * @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag
+ * @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag
+ * @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag
+ * @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag
+ * @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag
+ * @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag
+ * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag
+ * @arg CAN_FLAG_FF0: FIFO 0 Full Flag
+ * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag
+ * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag
+ * @arg CAN_FLAG_FF1: FIFO 1 Full Flag
+ * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag
+ * @arg CAN_FLAG_WKU: Wake up Flag
+ * @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_CAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+((((__FLAG__) >> 8U) == 5)? (((__HANDLE__)->Instance->TSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 2)? (((__HANDLE__)->Instance->RF0R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 4)? (((__HANDLE__)->Instance->RF1R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
+ (((__FLAG__) >> 8U) == 1)? (((__HANDLE__)->Instance->MSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): 0)
+
+
+/** @brief Check if the specified CAN interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the CAN Handle.
+ * @param __INTERRUPT__: specifies the CAN interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg CAN_IT_TME: Transmit mailbox empty interrupt enable
+ * @arg CAN_IT_FMP0: FIFO0 message pending interrupt enablev
+ * @arg CAN_IT_FMP1: FIFO1 message pending interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_CAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+ * @brief Check the transmission status of a CAN Frame.
+ * @param __HANDLE__: specifies the CAN Handle.
+ * @param __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission.
+ * @retval The new status of transmission (TRUE or FALSE).
+ */
+#define __HAL_CAN_TRANSMIT_STATUS(__HANDLE__, __TRANSMITMAILBOX__)\
+(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) == (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) :\
+ ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) == (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) :\
+ ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)) == (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)))
+
+
+
+/**
+ * @brief Release the specified receive FIFO.
+ * @param __HANDLE__: CAN handle.
+ * @param __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1.
+ * @retval None.
+ */
+#define __HAL_CAN_FIFO_RELEASE(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \
+((__HANDLE__)->Instance->RF0R |= CAN_RF0R_RFOM0) : ((__HANDLE__)->Instance->RF1R |= CAN_RF1R_RFOM1))
+
+/**
+ * @brief Cancel a transmit request.
+ * @param __HANDLE__: specifies the CAN Handle.
+ * @param __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission.
+ * @retval None.
+ */
+#define __HAL_CAN_CANCEL_TRANSMIT(__HANDLE__, __TRANSMITMAILBOX__)\
+(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ0) :\
+ ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ1) :\
+ ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ2))
+
+/**
+ * @brief Enable or disables the DBG Freeze for CAN.
+ * @param __HANDLE__: specifies the CAN Handle.
+ * @param __NEWSTATE__: new state of the CAN peripheral.
+ * This parameter can be: ENABLE (CAN reception/transmission is frozen
+ * during debug. Reception FIFOs can still be accessed/controlled normally)
+ * or DISABLE (CAN is working during debug).
+ * @retval None
+ */
+#define __HAL_CAN_DBG_FREEZE(__HANDLE__, __NEWSTATE__) (((__NEWSTATE__) == ENABLE)? \
+((__HANDLE__)->Instance->MCR |= CAN_MCR_DBF) : ((__HANDLE__)->Instance->MCR &= ~CAN_MCR_DBF))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CAN_Exported_Functions CAN Exported Functions
+ * @{
+ */
+
+/** @defgroup CAN_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+/* addtogroup and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan);
+HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig);
+HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan);
+void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan);
+void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan);
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group2 Input and Output operation functions
+ * @brief I/O operation functions
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef *hcan, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef *hcan, uint8_t FIFONumber, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef *hcan, uint8_t FIFONumber);
+HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef *hcan);
+HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef *hcan);
+void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan);
+void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan);
+void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan);
+void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan);
+/**
+ * @}
+ */
+
+/** @addtogroup CAN_Exported_Functions_Group3 Peripheral State and Error functions
+ * @brief CAN Peripheral State functions
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan);
+HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F302x8 || */
+ /* STM32F373xC || STM32F378xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_CAN_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_cec.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,593 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_cec.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of CEC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_CEC_H
+#define __STM32F3xx_HAL_CEC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CEC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CEC_Exported_Types CEC Exported Types
+ * @{
+ */
+/**
+ * @brief CEC Init Structure definition
+ */
+typedef struct
+{
+ uint32_t SignalFreeTime; /*!< Set SFT field, specifies the Signal Free Time.
+ It can be one of @ref CEC_Signal_Free_Time
+ and belongs to the set {0,...,7} where
+ 0x0 is the default configuration
+ else means 0.5 + (SignalFreeTime - 1) nominal data bit periods */
+
+ uint32_t Tolerance; /*!< Set RXTOL bit, specifies the tolerance accepted on the received waveforms,
+ it can be a value of @ref CEC_Tolerance : it is either CEC_STANDARD_TOLERANCE
+ or CEC_EXTENDED_TOLERANCE */
+
+ uint32_t BRERxStop; /*!< Set BRESTP bit @ref CEC_BRERxStop : specifies whether or not a Bit Rising Error stops the reception.
+ CEC_NO_RX_STOP_ON_BRE: reception is not stopped.
+ CEC_RX_STOP_ON_BRE: reception is stopped. */
+
+ uint32_t BREErrorBitGen; /*!< Set BREGEN bit @ref CEC_BREErrorBitGen : specifies whether or not an Error-Bit is generated on the
+ CEC line upon Bit Rising Error detection.
+ CEC_BRE_ERRORBIT_NO_GENERATION: no error-bit generation.
+ CEC_BRE_ERRORBIT_GENERATION: error-bit generation if BRESTP is set. */
+
+ uint32_t LBPEErrorBitGen; /*!< Set LBPEGEN bit @ref CEC_LBPEErrorBitGen : specifies whether or not an Error-Bit is generated on the
+ CEC line upon Long Bit Period Error detection.
+ CEC_LBPE_ERRORBIT_NO_GENERATION: no error-bit generation.
+ CEC_LBPE_ERRORBIT_GENERATION: error-bit generation. */
+
+ uint32_t BroadcastMsgNoErrorBitGen; /*!< Set BRDNOGEN bit @ref CEC_BroadCastMsgErrorBitGen : allows to avoid an Error-Bit generation on the CEC line
+ upon an error detected on a broadcast message.
+
+ It supersedes BREGEN and LBPEGEN bits for a broadcast message error handling. It can take two values:
+
+ 1) CEC_BROADCASTERROR_ERRORBIT_GENERATION.
+ a) BRE detection: error-bit generation on the CEC line if BRESTP=CEC_RX_STOP_ON_BRE
+ and BREGEN=CEC_BRE_ERRORBIT_NO_GENERATION.
+ b) LBPE detection: error-bit generation on the CEC line
+ if LBPGEN=CEC_LBPE_ERRORBIT_NO_GENERATION.
+
+ 2) CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION.
+ no error-bit generation in case neither a) nor b) are satisfied. Additionally,
+ there is no error-bit generation in case of Short Bit Period Error detection in
+ a broadcast message while LSTN bit is set. */
+
+ uint32_t SignalFreeTimeOption; /*!< Set SFTOP bit @ref CEC_SFT_Option : specifies when SFT timer starts.
+ CEC_SFT_START_ON_TXSOM SFT: timer starts when TXSOM is set by software.
+ CEC_SFT_START_ON_TX_RX_END: SFT timer starts automatically at the end of message transmission/reception. */
+
+ uint32_t OwnAddress; /*!< Set OAR field, specifies CEC device address within a 15-bit long field */
+
+ uint32_t ListenMode; /*!< Set LSTN bit @ref CEC_Listening_Mode : specifies device listening mode. It can take two values:
+
+ CEC_REDUCED_LISTENING_MODE: CEC peripheral receives only message addressed to its
+ own address (OAR). Messages addressed to different destination are ignored.
+ Broadcast messages are always received.
+
+ CEC_FULL_LISTENING_MODE: CEC peripheral receives messages addressed to its own
+ address (OAR) with positive acknowledge. Messages addressed to different destination
+ are received, but without interfering with the CEC bus: no acknowledge sent. */
+
+ uint8_t InitiatorAddress; /* Initiator address (source logical address, sent in each header) */
+
+}CEC_InitTypeDef;
+
+/**
+ * @brief HAL CEC State structures definition
+ */
+typedef enum
+{
+ HAL_CEC_STATE_RESET = 0x00, /*!< Peripheral Reset state */
+ HAL_CEC_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_CEC_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_CEC_STATE_BUSY_TX = 0x03, /*!< Data Transmission process is ongoing */
+ HAL_CEC_STATE_BUSY_RX = 0x04, /*!< Data Reception process is ongoing */
+ HAL_CEC_STATE_STANDBY_RX = 0x05, /*!< IP ready to receive, doesn't prevent IP to transmit */
+ HAL_CEC_STATE_TIMEOUT = 0x06, /*!< Timeout state */
+ HAL_CEC_STATE_ERROR = 0x07 /*!< State Error */
+}HAL_CEC_StateTypeDef;
+
+/**
+ * @brief HAL Error structures definition
+ */
+typedef enum
+{
+ HAL_CEC_ERROR_NONE = (uint32_t) 0x0, /*!< no error */
+ HAL_CEC_ERROR_RXOVR = CEC_ISR_RXOVR, /*!< CEC Rx-Overrun */
+ HAL_CEC_ERROR_BRE = CEC_ISR_BRE, /*!< CEC Rx Bit Rising Error */
+ HAL_CEC_ERROR_SBPE = CEC_ISR_SBPE, /*!< CEC Rx Short Bit period Error */
+ HAL_CEC_ERROR_LBPE = CEC_ISR_LBPE, /*!< CEC Rx Long Bit period Error */
+ HAL_CEC_ERROR_RXACKE = CEC_ISR_RXACKE, /*!< CEC Rx Missing Acknowledge */
+ HAL_CEC_ERROR_ARBLST = CEC_ISR_ARBLST, /*!< CEC Arbitration Lost */
+ HAL_CEC_ERROR_TXUDR = CEC_ISR_TXUDR, /*!< CEC Tx-Buffer Underrun */
+ HAL_CEC_ERROR_TXERR = CEC_ISR_TXERR, /*!< CEC Tx-Error */
+ HAL_CEC_ERROR_TXACKE = CEC_ISR_TXACKE /*!< CEC Tx Missing Acknowledge */
+}
+HAL_CEC_ErrorTypeDef;
+
+/**
+ * @brief CEC handle Structure definition
+ */
+typedef struct
+{
+ CEC_TypeDef *Instance; /* CEC registers base address */
+
+ CEC_InitTypeDef Init; /* CEC communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to CEC Tx transfer Buffer */
+
+ uint16_t TxXferCount; /* CEC Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to CEC Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* CEC Rx Transfer size, 0: header received only */
+
+ uint32_t ErrorCode; /* For errors handling purposes, copy of ISR register
+ in case error is reported */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ HAL_CEC_StateTypeDef State; /* CEC communication state */
+
+}CEC_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CEC_Exported_Constants CEC Exported Constants
+ * @{
+ */
+
+/** @defgroup CEC_Signal_Free_Time Signal Free Time setting parameter
+ * @{
+ */
+#define CEC_DEFAULT_SFT ((uint32_t)0x00000000)
+#define CEC_0_5_BITPERIOD_SFT ((uint32_t)0x00000001)
+#define CEC_1_5_BITPERIOD_SFT ((uint32_t)0x00000002)
+#define CEC_2_5_BITPERIOD_SFT ((uint32_t)0x00000003)
+#define CEC_3_5_BITPERIOD_SFT ((uint32_t)0x00000004)
+#define CEC_4_5_BITPERIOD_SFT ((uint32_t)0x00000005)
+#define CEC_5_5_BITPERIOD_SFT ((uint32_t)0x00000006)
+#define CEC_6_5_BITPERIOD_SFT ((uint32_t)0x00000007)
+#define IS_CEC_SIGNALFREETIME(SFT) ((SFT) <= CEC_CFGR_SFT)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Tolerance Receiver Tolerance
+ * @{
+ */
+#define CEC_STANDARD_TOLERANCE ((uint32_t)0x00000000)
+#define CEC_EXTENDED_TOLERANCE ((uint32_t)CEC_CFGR_RXTOL)
+#define IS_CEC_TOLERANCE(RXTOL) (((RXTOL) == CEC_STANDARD_TOLERANCE) || \
+ ((RXTOL) == CEC_EXTENDED_TOLERANCE))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BRERxStop Reception Stop on Error
+ * @{
+ */
+#define CEC_NO_RX_STOP_ON_BRE ((uint32_t)0x00000000)
+#define CEC_RX_STOP_ON_BRE ((uint32_t)CEC_CFGR_BRESTP)
+#define IS_CEC_BRERXSTOP(BRERXSTOP) (((BRERXSTOP) == CEC_NO_RX_STOP_ON_BRE) || \
+ ((BRERXSTOP) == CEC_RX_STOP_ON_BRE))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BREErrorBitGen Error Bit Generation if Bit Rise Error reported
+ * @{
+ */
+#define CEC_BRE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000)
+#define CEC_BRE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BREGEN)
+#define IS_CEC_BREERRORBITGEN(ERRORBITGEN) (((ERRORBITGEN) == CEC_BRE_ERRORBIT_NO_GENERATION) || \
+ ((ERRORBITGEN) == CEC_BRE_ERRORBIT_GENERATION))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_LBPEErrorBitGen Error Bit Generation if Long Bit Period Error reported
+ * @{
+ */
+#define CEC_LBPE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000)
+#define CEC_LBPE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_LBPEGEN)
+#define IS_CEC_LBPEERRORBITGEN(ERRORBITGEN) (((ERRORBITGEN) == CEC_LBPE_ERRORBIT_NO_GENERATION) || \
+ ((ERRORBITGEN) == CEC_LBPE_ERRORBIT_GENERATION))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_BroadCastMsgErrorBitGen Error Bit Generation on Broadcast message
+ * @{
+ */
+#define CEC_BROADCASTERROR_ERRORBIT_GENERATION ((uint32_t)0x00000000)
+#define CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BRDNOGEN)
+#define IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(ERRORBITGEN) (((ERRORBITGEN) == CEC_BROADCASTERROR_ERRORBIT_GENERATION) || \
+ ((ERRORBITGEN) == CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_SFT_Option Signal Free Time start option
+ * @{
+ */
+#define CEC_SFT_START_ON_TXSOM ((uint32_t)0x00000000)
+#define CEC_SFT_START_ON_TX_RX_END ((uint32_t)CEC_CFGR_SFTOPT)
+#define IS_CEC_SFTOP(SFTOP) (((SFTOP) == CEC_SFT_START_ON_TXSOM) || \
+ ((SFTOP) == CEC_SFT_START_ON_TX_RX_END))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Listening_Mode Listening mode option
+ * @{
+ */
+#define CEC_REDUCED_LISTENING_MODE ((uint32_t)0x00000000)
+#define CEC_FULL_LISTENING_MODE ((uint32_t)CEC_CFGR_LSTN)
+#define IS_CEC_LISTENING_MODE(MODE) (((MODE) == CEC_REDUCED_LISTENING_MODE) || \
+ ((MODE) == CEC_FULL_LISTENING_MODE))
+/**
+ * @}
+ */
+
+/** @defgroup CEC_ALL_ERROR all RX or TX errors flags in CEC ISR register
+ * @{
+ */
+#define CEC_ISR_ALL_ERROR ((uint32_t)CEC_ISR_RXOVR|CEC_ISR_BRE|CEC_ISR_SBPE|CEC_ISR_LBPE|CEC_ISR_RXACKE|\
+ CEC_ISR_ARBLST|CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_IER_ALL_RX all RX errors interrupts enabling flag
+ * @{
+ */
+#define CEC_IER_RX_ALL_ERR ((uint32_t)CEC_IER_RXACKEIE|CEC_IER_LBPEIE|CEC_IER_SBPEIE|CEC_IER_BREIE|CEC_IER_RXOVRIE)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_IER_ALL_TX all TX errors interrupts enabling flag
+ * @{
+ */
+#define CEC_IER_TX_ALL_ERR ((uint32_t)CEC_IER_TXACKEIE|CEC_IER_TXERRIE|CEC_IER_TXUDRIE|CEC_IER_ARBLSTIE)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_OAR_Position Device Own Address position in CEC CFGR register
+ * @{
+ */
+#define CEC_CFGR_OAR_LSB_POS ((uint32_t) 16)
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Initiator_Position Initiator logical address position in message header
+ * @{
+ */
+#define CEC_INITIATOR_LSB_POS ((uint32_t) 4)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup CEC_Exported_Macros CEC Exported Macros
+ * @{
+ */
+
+/** @brief Reset CEC handle state
+ * @param __HANDLE__: CEC handle.
+ * @retval None
+ */
+#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CEC_STATE_RESET)
+
+/** @brief Checks whether or not the specified CEC interrupt flag is set.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg CEC_ISR_RXBR : Rx-Byte Received
+ * @arg CEC_ISR_RXEND : End of Reception
+ * @arg CEC_ISR_RXOVR : Rx Overrun
+ * @arg CEC_ISR_BRE : Rx Bit Rising Error
+ * @arg CEC_ISR_SBPE : Rx Short Bit Period Error
+ * @arg CEC_ISR_LBPE : Rx Long Bit Period Error
+ * @arg CEC_ISR_RXACKE : Rx Missing Acknowledge
+ * @arg CEC_ISR_ARBLST : Arbitration lost
+ * @arg CEC_ISR_TXBR : Tx-Byte Request
+ * @arg CEC_ISR_TXEND : End of Transmission
+ * @arg CEC_ISR_TXUDR : Tx-buffer Underrun
+ * @arg CEC_ISR_TXERR : Tx Error
+ * @arg CEC_ISR_TXACKE : Tx Missing Acknowledge
+ * @retval ITStatus
+ */
+#define __HAL_CEC_GET_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->ISR & (__INTERRUPT__))
+
+/** @brief Clears the interrupt or status flag when raised (write at 1)
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __FLAG__: specifies the interrupt/status flag to clear.
+ * This parameter can be one of the following values:
+ * @arg CEC_ISR_RXBR : Rx-Byte Received
+ * @arg CEC_ISR_RXEND : End of Reception
+ * @arg CEC_ISR_RXOVR : Rx Overrun
+ * @arg CEC_ISR_BRE : Rx Bit Rising Error
+ * @arg CEC_ISR_SBPE : Rx Short Bit Period Error
+ * @arg CEC_ISR_LBPE : Rx Long Bit Period Error
+ * @arg CEC_ISR_RXACKE : Rx Missing Acknowledge
+ * @arg CEC_ISR_ARBLST : Arbitration lost
+ * @arg CEC_ISR_TXBR : Tx-Byte Request
+ * @arg CEC_ISR_TXEND : End of Transmission
+ * @arg CEC_ISR_TXUDR : Tx-buffer Underrun
+ * @arg CEC_ISR_TXERR : Tx Error
+ * @arg CEC_ISR_TXACKE : Tx Missing Acknowledge
+ * @retval none
+ */
+#define __HAL_CEC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR = (__FLAG__))
+
+/** @brief Enables the specified CEC interrupt.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the CEC interrupt to enable.
+ * This parameter can be one of the following values:
+ * @arg CEC_IER_RXBRIE : Rx-Byte Received IT Enable
+ * @arg CEC_IER_RXENDIE : End Of Reception IT Enable
+ * @arg CEC_IER_RXOVRIE : Rx-Overrun IT Enable
+ * @arg CEC_IER_BREIE : Rx Bit Rising Error IT Enable
+ * @arg CEC_IER_SBPEIE : Rx Short Bit period Error IT Enable
+ * @arg CEC_IER_LBPEIE : Rx Long Bit period Error IT Enable
+ * @arg CEC_IER_RXACKEIE : Rx Missing Acknowledge IT Enable
+ * @arg CEC_IER_ARBLSTIE : Arbitration Lost IT Enable
+ * @arg CEC_IER_TXBRIE : Tx Byte Request IT Enable
+ * @arg CEC_IER_TXENDIE : End of Transmission IT Enable
+ * @arg CEC_IER_TXUDRIE : Tx-Buffer Underrun IT Enable
+ * @arg CEC_IER_TXERRIE : Tx-Error IT Enable
+ * @arg CEC_IER_TXACKEIE : Tx Missing Acknowledge IT Enable
+ * @retval none
+ */
+#define __HAL_CEC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/** @brief Disables the specified CEC interrupt.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the CEC interrupt to disable.
+ * This parameter can be one of the following values:
+ * @arg CEC_IER_RXBRIE : Rx-Byte Received IT Enable
+ * @arg CEC_IER_RXENDIE : End Of Reception IT Enable
+ * @arg CEC_IER_RXOVRIE : Rx-Overrun IT Enable
+ * @arg CEC_IER_BREIE : Rx Bit Rising Error IT Enable
+ * @arg CEC_IER_SBPEIE : Rx Short Bit period Error IT Enable
+ * @arg CEC_IER_LBPEIE : Rx Long Bit period Error IT Enable
+ * @arg CEC_IER_RXACKEIE : Rx Missing Acknowledge IT Enable
+ * @arg CEC_IER_ARBLSTIE : Arbitration Lost IT Enable
+ * @arg CEC_IER_TXBRIE : Tx Byte Request IT Enable
+ * @arg CEC_IER_TXENDIE : End of Transmission IT Enable
+ * @arg CEC_IER_TXUDRIE : Tx-Buffer Underrun IT Enable
+ * @arg CEC_IER_TXERRIE : Tx-Error IT Enable
+ * @arg CEC_IER_TXACKEIE : Tx Missing Acknowledge IT Enable
+ * @retval none
+ */
+#define __HAL_CEC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__)))
+
+/** @brief Checks whether or not the specified CEC interrupt is enabled.
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __INTERRUPT__: specifies the CEC interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg CEC_IER_RXBRIE : Rx-Byte Received IT Enable
+ * @arg CEC_IER_RXENDIE : End Of Reception IT Enable
+ * @arg CEC_IER_RXOVRIE : Rx-Overrun IT Enable
+ * @arg CEC_IER_BREIE : Rx Bit Rising Error IT Enable
+ * @arg CEC_IER_SBPEIE : Rx Short Bit period Error IT Enable
+ * @arg CEC_IER_LBPEIE : Rx Long Bit period Error IT Enable
+ * @arg CEC_IER_RXACKEIE : Rx Missing Acknowledge IT Enable
+ * @arg CEC_IER_ARBLSTIE : Arbitration Lost IT Enable
+ * @arg CEC_IER_TXBRIE : Tx Byte Request IT Enable
+ * @arg CEC_IER_TXENDIE : End of Transmission IT Enable
+ * @arg CEC_IER_TXUDRIE : Tx-Buffer Underrun IT Enable
+ * @arg CEC_IER_TXERRIE : Tx-Error IT Enable
+ * @arg CEC_IER_TXACKEIE : Tx Missing Acknowledge IT Enable
+ * @retval FlagStatus
+ */
+#define __HAL_CEC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__))
+
+/** @brief Enables the CEC device
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_CECEN)
+
+/** @brief Disables the CEC device
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~CEC_CR_CECEN)
+
+/** @brief Set Transmission Start flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_FIRST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXSOM)
+
+/** @brief Set Transmission End flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ * If the CEC message consists of only one byte, TXEOM must be set before of TXSOM.
+ */
+#define __HAL_CEC_LAST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXEOM)
+
+/** @brief Get Transmission Start flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval FlagStatus
+ */
+#define __HAL_CEC_GET_TRANSMISSION_START_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXSOM)
+
+/** @brief Get Transmission End flag
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval FlagStatus
+ */
+#define __HAL_CEC_GET_TRANSMISSION_END_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXEOM)
+
+/** @brief Clear OAR register
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @retval none
+ */
+#define __HAL_CEC_CLEAR_OAR(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_OAR)
+
+/** @brief Set OAR register (without resetting previously set address in case of multi-address mode)
+ * To reset OAR, __HAL_CEC_CLEAR_OAR() needs to be called beforehand
+ * @param __HANDLE__: specifies the CEC Handle.
+ * @param __ADDRESS__: Own Address value (CEC logical address is identified by bit position)
+ * @retval none
+ */
+#define __HAL_CEC_SET_OAR(__HANDLE__,__ADDRESS__) SET_BIT((__HANDLE__)->Instance->CFGR, (__ADDRESS__)<< CEC_CFGR_OAR_LSB_POS)
+
+/** @brief Check CEC device Own Address Register (OAR) setting.
+ * OAR address is written in a 15-bit field within CEC_CFGR register.
+ * @param __ADDRESS__: CEC own address.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_OAR_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x07FFF)
+
+/** @brief Check CEC initiator or destination logical address setting.
+ * Initiator and destination addresses are coded over 4 bits.
+ * @param __ADDRESS__: CEC initiator or logical address.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0xF)
+
+/** @brief Check CEC message size.
+ * The message size is the payload size: without counting the header,
+ * it varies from 0 byte (ping operation, one header only, no payload) to
+ * 15 bytes (1 opcode and up to 14 operands following the header).
+ * @param __SIZE__: CEC message size.
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_CEC_MSGSIZE(__SIZE__) ((__SIZE__) <= 0xF)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CEC_Exported_Functions CEC Exported Functions
+ * @{
+ */
+
+/** @addtogroup CEC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec);
+HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec);
+void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec);
+void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec);
+/**
+ * @}
+ */
+
+/** @addtogroup CEC_Exported_Functions_Group2 Input and Output operation functions
+ * @brief CEC Transmit/Receive functions
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_CEC_Transmit(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CEC_Receive(CEC_HandleTypeDef *hcec, uint8_t *pData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size);
+HAL_StatusTypeDef HAL_CEC_Receive_IT(CEC_HandleTypeDef *hcec, uint8_t *pData);
+void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec);
+void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec);
+void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec);
+void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec);
+/**
+ * @}
+ */
+
+/** @defgroup CEC_Exported_Functions_Group3 Peripheral Control functions
+ * @brief CEC control functions
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec);
+uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(STM32F373xC) || defined(STM32F378xx) */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_CEC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_comp.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,275 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_comp.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of COMP HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_COMP_H
+#define __STM32F3xx_HAL_COMP_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup COMP
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup COMP_Exported_Types COMP Exported Types
+ * @{
+ */
+/**
+ * @brief COMP Init structure definition
+ */
+
+typedef struct
+{
+
+ uint32_t InvertingInput; /*!< Selects the inverting input of the comparator.
+ This parameter can be a value of @ref COMPEx_InvertingInput */
+
+ uint32_t NonInvertingInput; /*!< Selects the non inverting input of the comparator.
+ This parameter can be a value of @ref COMPEx_NonInvertingInput
+ Note: Only available on STM32F302xB/xC, STM32F303xB/xC and STM32F358xx devices */
+
+ uint32_t Output; /*!< Selects the output redirection of the comparator.
+ This parameter can be a value of @ref COMPEx_Output */
+
+ uint32_t OutputPol; /*!< Selects the output polarity of the comparator.
+ This parameter can be a value of @ref COMP_OutputPolarity */
+
+ uint32_t Hysteresis; /*!< Selects the hysteresis voltage of the comparator.
+ This parameter can be a value of @ref COMPEx_Hysteresis
+ Note: Only available on STM32F302xB/xC, STM32F303xB/xC, STM32F373xB/xC, STM32F358xx and STM32F378xx devices */
+
+ uint32_t BlankingSrce; /*!< Selects the output blanking source of the comparator.
+ This parameter can be a value of @ref COMPEx_BlankingSrce
+ Note: Not available on STM32F373xB/C and STM32F378xx devices */
+
+ uint32_t Mode; /*!< Selects the operating comsumption mode of the comparator
+ to adjust the speed/consumption.
+ This parameter can be a value of @ref COMPEx_Mode
+ Note: Not available on STM32F301x6/x8, STM32F302x6/x8, STM32F334x6/x8, STM32F318xx and STM32F328xx devices */
+
+ uint32_t WindowMode; /*!< Selects the window mode of the comparator X (X=2, 4 or 6 if available).
+ This parameter can be a value of @ref COMPEx_WindowMode */
+
+ uint32_t TriggerMode; /*!< Selects the trigger mode of the comparator (interrupt mode).
+ This parameter can be a value of @ref COMP_TriggerMode */
+
+}COMP_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_COMP_STATE_RESET = 0x00, /*!< COMP not yet initialized or disabled */
+ HAL_COMP_STATE_READY = 0x01, /*!< COMP initialized and ready for use */
+ HAL_COMP_STATE_READY_LOCKED = 0x11, /*!< COMP initialized but the configuration is locked */
+ HAL_COMP_STATE_BUSY = 0x02, /*!< COMP is running */
+ HAL_COMP_STATE_BUSY_LOCKED = 0x12 /*!< COMP is running and the configuration is locked */
+}HAL_COMP_StateTypeDef;
+
+
+/**
+ * @brief PPP Handle Structure definition
+ */
+typedef struct
+{
+ COMP_TypeDef *Instance; /*!< Register base address */
+ COMP_InitTypeDef Init; /*!< COMP required parameters */
+ HAL_LockTypeDef Lock; /*!< Locking object */
+ __IO HAL_COMP_StateTypeDef State; /*!< COMP communication state */
+
+}COMP_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup COMP_Exported_Constants COMP Exported Constants
+ * @{
+ */
+
+/** @defgroup COMP_OutputPolarity COMP Output Polarity
+ * @{
+ */
+#define COMP_OUTPUTPOL_NONINVERTED ((uint32_t)0x00000000) /*!< COMP output on GPIO isn't inverted */
+#define COMP_OUTPUTPOL_INVERTED COMP_CSR_COMPxPOL /*!< COMP output on GPIO is inverted */
+#define IS_COMP_OUTPUTPOL(POL) (((POL) == COMP_OUTPUTPOL_NONINVERTED) || \
+ ((POL) == COMP_OUTPUTPOL_INVERTED))
+/**
+ * @}
+ */
+
+/** @defgroup COMP_OutputLevel COMP Output Level
+ * @{
+ */
+/* When output polarity is not inverted, comparator output is low when
+ the non-inverting input is at a lower voltage than the inverting input*/
+#define COMP_OUTPUTLEVEL_LOW ((uint32_t)0x00000000)
+/* When output polarity is not inverted, comparator output is high when
+ the non-inverting input is at a higher voltage than the inverting input */
+#define COMP_OUTPUTLEVEL_HIGH COMP_CSR_COMPxOUT
+/**
+ * @}
+ */
+
+/** @defgroup COMP_TriggerMode COMP Trigger Mode
+ * @{
+ */
+#define COMP_TRIGGERMODE_NONE ((uint32_t)0x00000000) /*!< No External Interrupt trigger detection */
+#define COMP_TRIGGERMODE_IT_RISING ((uint32_t)0x00000001) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define COMP_TRIGGERMODE_IT_FALLING ((uint32_t)0x00000002) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define COMP_TRIGGERMODE_IT_RISING_FALLING ((uint32_t)0x00000003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define IS_COMP_TRIGGERMODE(MODE) (((MODE) == COMP_TRIGGERMODE_NONE) || \
+ ((MODE) == COMP_TRIGGERMODE_IT_RISING) || \
+ ((MODE) == COMP_TRIGGERMODE_IT_FALLING) || \
+ ((MODE) == COMP_TRIGGERMODE_IT_RISING_FALLING))
+/**
+ * @}
+ */
+
+#define COMP_LOCK_DISABLE ((uint32_t)0x00000000)
+#define COMP_LOCK_ENABLE COMP_CSR_COMPxLOCK
+
+#define COMP_STATE_BIT_LOCK ((uint32_t)0x10)
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup COMP_Exported_Macros COMP Exported Macros
+ * @{
+ */
+
+/** @brief Reset COMP handle state
+ * @param __HANDLE__: COMP handle.
+ * @retval None
+ */
+#define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_COMP_STATE_RESET)
+/**
+ * @}
+ */
+
+/* Include COMP HAL Extended module */
+#include "stm32f3xx_hal_comp_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup COMP_Exported_Functions COMP Exported Functions
+ * @{
+ */
+
+/** @addtogroup COMP_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_DeInit (COMP_HandleTypeDef *hcomp);
+void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp);
+void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp);
+/**
+ * @}
+ */
+
+/** @addtogroup COMP_Exported_Functions_Group2 Input and Output operation functions
+ * @brief Data transfers functions
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_Start_IT(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_Stop_IT(COMP_HandleTypeDef *hcomp);
+void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp);
+/**
+ * @}
+ */
+
+/** @addtogroup COMP_Exported_Functions_Group3 Peripheral Control functions
+ * @brief management functions
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp);
+uint32_t HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp);
+
+/* Callback in Interrupt mode */
+void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp);
+/**
+ * @}
+ */
+
+/** @addtogroup COMP_Exported_Functions_Group4 Peripheral State functions
+ * @brief Peripheral State functions
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_COMP_StateTypeDef HAL_COMP_GetState(COMP_HandleTypeDef *hcomp);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_COMP_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_comp_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1493 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_comp_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of COMP HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_COMP_EX_H
+#define __STM32F3xx_HAL_COMP_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup COMPEx COMP Extended HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup COMPEx_Exported_Constants COMP Extended Exported Constants
+ * @{
+ */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+ /** @defgroup COMPEx_InvertingInput COMP Extended InvertingInput (STM32F302xE/STM32F303xE/STM32F398xx/STM32F302xC/STM32F303xC/STM32F358xx Product devices)
+ * @{
+ */
+#define COMP_INVERTINGINPUT_1_4VREFINT ((uint32_t)0x00000000) /*!< 1/4 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_1_2VREFINT COMP_CSR_COMPxINSEL_0 /*!< 1/2 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_3_4VREFINT COMP_CSR_COMPxINSEL_1 /*!< 3/4 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_VREFINT (COMP_CSR_COMPxINSEL_1|COMP_CSR_COMPxINSEL_0) /*!< VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_CSR_COMPxINSEL_2 /*!< DAC1_CH1_OUT (PA4) connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_DAC1_CH2 (COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_0) /*!< DAC1_CH2_OUT (PA5) connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_IO1 (COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_1) /*!< I/O1 (PA0 for COMP1, PA2 for COMP2, PD15 for COMP3,
+ PE8 for COMP4, PD13 for COMP5, PD10 for COMP6,
+ PC0 for COMP7) connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_IO2 COMP_CSR_COMPxINSEL /*!< I/O2 (PB12 for COMP3, PB2 for COMP4, PB10 for COMP5,
+ PB15 for COMP6) connected to comparator inverting input */
+/* Aliases for compatibility */
+#define COMP_INVERTINGINPUT_DAC1 COMP_INVERTINGINPUT_DAC1_CH1
+#define COMP_INVERTINGINPUT_DAC2 COMP_INVERTINGINPUT_DAC1_CH2
+
+#define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_DAC1_CH1) || \
+ ((INPUT) == COMP_INVERTINGINPUT_DAC1_CH2) || \
+ ((INPUT) == COMP_INVERTINGINPUT_IO1) || \
+ ((INPUT) == COMP_INVERTINGINPUT_IO2))
+/**
+ * @}
+ */
+#elif defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/** @defgroup COMPEx_InvertingInput COMP Extended InvertingInput (STM32F301x8/STM32F302x8/STM32F318xx Product devices)
+ * @{
+ */
+#define COMP_INVERTINGINPUT_1_4VREFINT ((uint32_t)0x00000000) /*!< 1/4 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_1_2VREFINT COMP_CSR_COMPxINSEL_0 /*!< 1/2 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_3_4VREFINT COMP_CSR_COMPxINSEL_1 /*!< 3/4 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_VREFINT (COMP_CSR_COMPxINSEL_1|COMP_CSR_COMPxINSEL_0) /*!< VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_CSR_COMPxINSEL_2 /*!< DAC1_CH1_OUT (PA4) connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_IO1 (COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_1) /*!< I/O1 (PA2 for COMP2, PB2 for COMP4, PB15 for COMP6)
+ connected to comparator inverting input */
+/* Aliases for compatibility */
+#define COMP_INVERTINGINPUT_DAC1 COMP_INVERTINGINPUT_DAC1_CH1
+
+#define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_DAC1_CH1) || \
+ ((INPUT) == COMP_INVERTINGINPUT_IO1))
+/**
+ * @}
+ */
+#elif defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+/** @defgroup COMPEx_InvertingInput COMP Extended InvertingInput (STM32F303x8/STM32F334x8/STM32F328xx Product devices)
+ * @{
+ */
+#define COMP_INVERTINGINPUT_1_4VREFINT ((uint32_t)0x00000000) /*!< 1/4 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_1_2VREFINT COMP_CSR_COMPxINSEL_0 /*!< 1/2 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_3_4VREFINT COMP_CSR_COMPxINSEL_1 /*!< 3/4 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_VREFINT (COMP_CSR_COMPxINSEL_1|COMP_CSR_COMPxINSEL_0) /*!< VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_DAC1_CH1 COMP_CSR_COMPxINSEL_2 /*!< DAC1_CH1_OUT (PA4) connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_DAC1_CH2 (COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_0) /*!< DAC1_CH2_OUT (PA5) connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_IO1 (COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_1) /*!< I/O1 (PA2 for COMP2, PB2 for COMP4, PB15 for COMP6)
+ connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_DAC2_CH1 COMP_CSR_COMPxINSEL_3 /*!< DAC2_CH1_OUT connected to comparator inverting input */
+/* Aliases for compatibility */
+#define COMP_INVERTINGINPUT_DAC1 COMP_INVERTINGINPUT_DAC1_CH1
+#define COMP_INVERTINGINPUT_DAC2 COMP_INVERTINGINPUT_DAC1_CH2
+
+#define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_DAC1_CH1) || \
+ ((INPUT) == COMP_INVERTINGINPUT_DAC1_CH2) || \
+ ((INPUT) == COMP_INVERTINGINPUT_IO1) || \
+ ((INPUT) == COMP_INVERTINGINPUT_DAC2_CH1))
+/**
+ * @}
+ */
+#elif defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup COMPEx_InvertingInput COMP Extended InvertingInput (STM32F373xC/STM32F378xx Product devices)
+ * @{
+ */
+#define COMP_INVERTINGINPUT_1_4VREFINT ((uint32_t)0x00000000) /*!< 1/4 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_1_2VREFINT ((uint32_t)COMP_CSR_COMPxINSEL_0) /*!< 1/2 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_3_4VREFINT ((uint32_t)COMP_CSR_COMPxINSEL_1) /*!< 3/4 VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_VREFINT ((uint32_t)(COMP_CSR_COMPxINSEL_1|COMP_CSR_COMPxINSEL_0)) /*!< VREFINT connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_DAC1_CH1 ((uint32_t)COMP_CSR_COMPxINSEL_2) /*!< DAC1_CH1_OUT (PA4) connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_DAC1_CH2 ((uint32_t)(COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_0)) /*!< DAC1_CH2_OUT (PA5) connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_IO1 ((uint32_t)(COMP_CSR_COMPxINSEL_2|COMP_CSR_COMPxINSEL_1)) /*!< I/O1 (PA0 for COMP1, PA2 for COMP2) connected to comparator inverting input */
+#define COMP_INVERTINGINPUT_DAC2_CH1 ((uint32_t)COMP_CSR_COMPxINSEL) /*!< DAC2_CH1_OUT connected to comparator inverting input */
+/* Aliases for compatibility */
+#define COMP_INVERTINGINPUT_DAC1 COMP_INVERTINGINPUT_DAC1_CH1
+#define COMP_INVERTINGINPUT_DAC2 COMP_INVERTINGINPUT_DAC1_CH2
+
+#define IS_COMP_INVERTINGINPUT(INPUT) (((INPUT) == COMP_INVERTINGINPUT_1_4VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_1_2VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_3_4VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_VREFINT) || \
+ ((INPUT) == COMP_INVERTINGINPUT_DAC1_CH1) || \
+ ((INPUT) == COMP_INVERTINGINPUT_DAC1_CH2) || \
+ ((INPUT) == COMP_INVERTINGINPUT_IO1) || \
+ ((INPUT) == COMP_INVERTINGINPUT_DAC2_CH1))
+/**
+ * @}
+ */
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+/** @defgroup COMPEx_NonInvertingInput COMP Extended NonInvertingInput (STM32F302xC/STM32F303xC/STM32F358xx Product devices)
+ * @{
+ */
+#define COMP_NONINVERTINGINPUT_IO1 ((uint32_t)0x00000000) /*!< I/O1 (PA1 for COMP1, PA7 for COMP2, PB14 for COMP3,
+ PB0 for COMP4, PD12 for COMP5, PD11 for COMP6,
+ PA0 for COMP7) connected to comparator non inverting input */
+#define COMP_NONINVERTINGINPUT_IO2 COMP_CSR_COMPxNONINSEL /*!< I/O2 (PA3 for COMP2, PD14 for COMP3, PE7 for COMP4, PB13 for COMP5,
+ PB11 for COMP6, PC1 for COMP7) connected to comparator non inverting input */
+#define COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED COMP1_CSR_COMP1SW1 /*!< DAC ouput connected to comparator COMP1 non inverting input */
+
+#define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
+ ((INPUT) == COMP_NONINVERTINGINPUT_IO2) || \
+ ((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))
+
+/* STM32F302xB/xC, STM32F303xB/xC, STM32F358xx devices comparator instances non inverting source values */
+#define IS_COMP_NONINVERTINGINPUT_INSTANCE(INSTANCE, INPUT) \
+ ((((INSTANCE) == COMP1) && \
+ (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
+ ((INPUT) == COMP_NONINVERTINGINPUT_IO2) || \
+ ((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))) \
+ || \
+ ((((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
+ ((INPUT) == COMP_NONINVERTINGINPUT_IO2))))
+
+#define COMP_CSR_COMPxNONINSEL_MASK (COMP_CSR_COMPxNONINSEL | COMP1_CSR_COMP1SW1) /*!< COMP_CSR_COMPxNONINSEL mask */
+/**
+ * @}
+ */
+#elif defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/** @defgroup COMPEx_NonInvertingInput COMP Extended NonInvertingInput (STM32F301x8/STM32F302x8/STM32F318xx Product devices)
+ * @{
+ */
+#define COMP_NONINVERTINGINPUT_IO1 ((uint32_t)0x00000000) /*!< I/O1 (PA7 for COMP2, PB0 for COMP4, PB11 for COMP6)
+ connected to comparator non inverting input */
+#define COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED COMP2_CSR_COMP2INPDAC /*!< DAC ouput connected to comparator COMP2 non inverting input */
+
+#define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
+ ((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))
+
+/* STM32F301x6/x8, STM32F302x6/x8, STM32F318xx devices comparator instances non inverting source values */
+#define IS_COMP_NONINVERTINGINPUT_INSTANCE(INSTANCE, INPUT) \
+ ((((INSTANCE) == COMP2) && \
+ (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
+ ((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))) \
+ || \
+ (((INPUT) == COMP_NONINVERTINGINPUT_IO1)))
+
+#define COMP_CSR_COMPxNONINSEL_MASK (COMP2_CSR_COMP2INPDAC) /*!< COMP_CSR_COMPxNONINSEL mask */
+/**
+ * @}
+ */
+#elif defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup COMPEx_NonInvertingInput COMP Extended NonInvertingInput (STM32F373xC/STM32F378xx Product devices)
+ * @{
+ */
+#define COMP_NONINVERTINGINPUT_IO1 ((uint32_t)0x00000000) /*!< I/O1 (PA1 for COMP1, PA3 for COMP2)
+ connected to comparator non inverting input */
+#define COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED COMP_CSR_COMP1SW1 /*!< DAC ouput connected to comparator COMP1 non inverting input */
+
+#define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
+ ((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))
+
+/* STM32F373xB/xC, STM32F378xx devices comparator instances non inverting source values */
+#define IS_COMP_NONINVERTINGINPUT_INSTANCE(INSTANCE, INPUT) \
+ ((((INSTANCE) == COMP1) && \
+ (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
+ ((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))) \
+ || \
+ (((INPUT) == COMP_NONINVERTINGINPUT_IO1)))
+
+#define COMP_CSR_COMPxNONINSEL_MASK (COMP_CSR_COMP1SW1) /*!< COMP_CSR_COMPxNONINSEL mask */
+/**
+ * @}
+ */
+#elif defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+/** @defgroup COMPEx_NonInvertingInput COMP Extended NonInvertingInput (STM32F302xE/STM32F303xE/STM32F398xx Product devices)
+ * @{
+ */
+#define COMP_NONINVERTINGINPUT_IO1 ((uint32_t)0x00000000) /*!< I/O1 (PA1 for COMP1, PA7 for COMP2, PB14 for COMP3,
+ PB0 for COMP4, PD12 for COMP5, PD11 for COMP6,
+ PA0 for COMP7) connected to comparator non inverting input */
+#define COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED COMP1_CSR_COMP1SW1 /*!< DAC ouput connected to comparator COMP1 non inverting input */
+
+#define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
+ ((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))
+
+/* STM32F302xE/STM32F303xE/STM32F398xx devices comparator instances non inverting source values */
+#define IS_COMP_NONINVERTINGINPUT_INSTANCE(INSTANCE, INPUT) \
+ ((((INSTANCE) == COMP1) && \
+ (((INPUT) == COMP_NONINVERTINGINPUT_IO1) || \
+ ((INPUT) == COMP_NONINVERTINGINPUT_DAC1SWITCHCLOSED))) \
+ || \
+ (((INPUT) == COMP_NONINVERTINGINPUT_IO1)))
+
+#define COMP_CSR_COMPxNONINSEL_MASK (COMP1_CSR_COMP1SW1) /*!< COMP_CSR_COMPxNONINSEL mask */
+/**
+ * @}
+ */
+#else
+/** @defgroup COMPEx_NonInvertingInput COMP Extended NonInvertingInput (Other Product devices)
+ * @{
+ */
+#define COMP_NONINVERTINGINPUT_IO1 ((uint32_t)0x00000000) /*!< I/O1 (PA7 for COMP2, PB0 for COMP4, PB11 for COMP6)
+ connected to comparator non inverting input */
+/*!< Non inverting input not available */
+#define IS_COMP_NONINVERTINGINPUT(INPUT) ((INPUT) == (INPUT)) /*!< Multiple selection not available: check always true */
+
+#define IS_COMP_NONINVERTINGINPUT_INSTANCE(INSTANCE, INPUT) ((INPUT) == (INPUT)) /*!< Multiple selection not available: check always true */
+
+#define COMP_CSR_COMPxNONINSEL_MASK ((uint32_t)0x00000000) /*!< Mask empty: feature not available */
+/**
+ * @}
+ */
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xC)
+/** @defgroup COMPEx_Output COMP Extended Output (STM32F302xC Product devices)
+ * @{
+ */
+#define COMP_OUTPUT_NONE ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */
+/* Output Redirection common for all comparators COMP1, COMP2, COMP4, COMP6 */
+#define COMP_OUTPUT_TIM1BKIN COMP_CSR_COMPxOUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */
+#define COMP_OUTPUT_TIM1BKIN2_BRK2 ((uint32_t)0x00000800) /*!< COMP output connected to TIM1 Break Input 2 (BKIN2) */
+#define COMP_OUTPUT_TIM1BKIN2 ((uint32_t)0x00001400) /*!< COMP output connected to TIM1 Break Input 2 */
+/* Output Redirection common for COMP1 and COMP2 */
+#define COMP_OUTPUT_TIM1OCREFCLR ((uint32_t)0x00001800) /*!< COMP output connected to TIM1 OCREF Clear */
+#define COMP_OUTPUT_TIM1IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM1 Input Capture 1 */
+#define COMP_OUTPUT_TIM2IC4 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 4 */
+#define COMP_OUTPUT_TIM2OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM2 OCREF Clear */
+#define COMP_OUTPUT_TIM3IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM3 Input Capture 1 */
+/* Output Redirection common for COMP1,COMP2 and COMP4 */
+#define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */
+/* Output Redirection specific to COMP4 */
+#define COMP_OUTPUT_TIM3IC3 ((uint32_t)0x00001800) /*!< COMP output connected to TIM3 Input Capture 3 */
+#define COMP_OUTPUT_TIM15IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM15 Input Capture 2 */
+#define COMP_OUTPUT_TIM4IC2 ((uint32_t)0x00002400) /*!< COMP output connected to TIM4 Input Capture 2 */
+#define COMP_OUTPUT_TIM15OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 OCREF Clear */
+/* Output Redirection specific to COMP6 */
+#define COMP_OUTPUT_TIM2IC2 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 2 */
+#define COMP_OUTPUT_COMP6TIM2OCREFCLR ((uint32_t)0x00002000) /*!< COMP6 output connected to TIM2 OCREF Clear */
+#define COMP_OUTPUT_TIM16OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM16 OCREF Clear */
+#define COMP_OUTPUT_TIM16IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Input Capture 1 */
+#define COMP_OUTPUT_TIM4IC4 ((uint32_t)0x00002C00) /*!< COMP output connected to TIM4 Input Capture 4 */
+
+#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_BRK2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3IC3) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM15IC2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM4IC2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM15OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \
+ ((OUTPUT) == COMP_OUTPUT_COMP6TIM2OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM4IC4))
+/**
+ * @}
+ */
+#elif defined(STM32F303xC) || defined(STM32F358xx)
+/** @defgroup COMPEx_Output COMP Extended Output (STM32F303xC/STM32F358xx Product devices)
+ * @{
+ */
+#define COMP_OUTPUT_NONE ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */
+/* Output Redirection common for all comparators COMP1...COMP7 */
+#define COMP_OUTPUT_TIM1BKIN COMP_CSR_COMPxOUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */
+#define COMP_OUTPUT_TIM1BKIN2 ((uint32_t)0x00000800) /*!< COMP output connected to TIM1 Break Input 2 (BKIN2) */
+#define COMP_OUTPUT_TIM8BKIN ((uint32_t)0x00000C00) /*!< COMP output connected to TIM8 Break Input (BKIN) */
+#define COMP_OUTPUT_TIM8BKIN2 ((uint32_t)0x00001000) /*!< COMP output connected to TIM8 Break Input 2 (BKIN2) */
+#define COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2 ((uint32_t)0x00001400) /*!< COMP output connected to TIM1 Break Input 2 and TIM8 Break Input 2 */
+/* Output Redirection common for COMP1, COMP2 and COMP3 */
+#define COMP_OUTPUT_TIM1OCREFCLR ((uint32_t)0x00001800) /*!< COMP output connected to TIM1 OCREF Clear */
+/* Output Redirection common for COMP1 and COMP2 */
+#define COMP_OUTPUT_TIM1IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM1 Input Capture 1 */
+#define COMP_OUTPUT_TIM2IC4 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 4 */
+#define COMP_OUTPUT_TIM2OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM2 OCREF Clear */
+#define COMP_OUTPUT_TIM3IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM3 Input Capture 1 */
+#define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */
+/* Output Redirection specific to COMP3 */
+#define COMP_OUTPUT_TIM4IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM4 Input Capture 1 */
+#define COMP_OUTPUT_TIM3IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM3 Input Capture 2 */
+#define COMP_OUTPUT_TIM15IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 Input Capture 1 */
+#define COMP_OUTPUT_TIM15BKIN ((uint32_t)0x00002C00) /*!< COMP output connected to TIM15 Break Input (BKIN) */
+/* Output Redirection specific to COMP4 */
+#define COMP_OUTPUT_TIM3IC3 ((uint32_t)0x00001800) /*!< COMP output connected to TIM3 Input Capture 3 */
+#define COMP_OUTPUT_TIM8OCREFCLR ((uint32_t)0x00001C00) /*!< COMP output connected to TIM8 OCREF Clear */
+#define COMP_OUTPUT_TIM15IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM15 Input Capture 2 */
+#define COMP_OUTPUT_TIM4IC2 ((uint32_t)0x00002400) /*!< COMP output connected to TIM4 Input Capture 2 */
+#define COMP_OUTPUT_TIM15OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 OCREF Clear */
+#define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */
+/* Output Redirection specific to COMP5 */
+#define COMP_OUTPUT_TIM2IC1 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 1 */
+#define COMP_OUTPUT_TIM8OCREFCLR ((uint32_t)0x00001C00) /*!< COMP output connected to TIM8 OCREF Clear */
+#define COMP_OUTPUT_TIM17IC1 ((uint32_t)0x00002000) /*!< COMP output connected to TIM17 Input Capture 1 */
+#define COMP_OUTPUT_TIM4IC3 ((uint32_t)0x00002400) /*!< COMP output connected to TIM4 Input Capture 3 */
+#define COMP_OUTPUT_TIM16BKIN ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Break Input (BKIN) */
+#define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */
+/* Output Redirection specific to COMP6 */
+#define COMP_OUTPUT_TIM2IC2 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 2 */
+#define COMP_OUTPUT_TIM8OCREFCLR ((uint32_t)0x00001C00) /*!< COMP output connected to TIM8 OCREF Clear */
+#define COMP_OUTPUT_COMP6_TIM2OCREFCLR ((uint32_t)0x00002000) /*!< COMP6 output connected to TIM2 OCREF Clear */
+#define COMP_OUTPUT_TIM16OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM16 OCREF Clear */
+#define COMP_OUTPUT_TIM16IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Input Capture 1 */
+#define COMP_OUTPUT_TIM4IC4 ((uint32_t)0x00002C00) /*!< COMP output connected to TIM4 Input Capture 4 */
+/* Output Redirection specific to COMP7 */
+#define COMP_OUTPUT_TIM1OCREFCLR ((uint32_t)0x00001800) /*!< COMP output connected to TIM1 OCREF Clear */
+#define COMP_OUTPUT_TIM8OCREFCLR ((uint32_t)0x00001C00) /*!< COMP output connected to TIM8 OCREF Clear */
+#define COMP_OUTPUT_TIM2IC3 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 3 */
+#define COMP_OUTPUT_TIM1IC2 ((uint32_t)0x00002400) /*!< COMP output connected to TIM1 Input Capture 2 */
+#define COMP_OUTPUT_TIM17OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 OCREF Clear */
+#define COMP_OUTPUT_TIM17BKIN ((uint32_t)0x00002C00) /*!< COMP output connected to TIM16 Break Input (BKIN) */
+
+#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1IC2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC3) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_COMP6_TIM2OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3IC2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3IC3) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM4IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM4IC2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM4IC3) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM4IC4) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM8BKIN) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM8BKIN2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM8OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM15IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM15IC2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM15BKIN) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM15OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM16BKIN) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM17BKIN) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM17IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM17OCREFCLR))
+/**
+ * @}
+ */
+#elif defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/** @defgroup COMPEx_Output COMP Extended Output (STM32F301x8/STM32F302x8/STM32F318xx Product devices)
+ * @{
+ */
+#define COMP_OUTPUT_NONE ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */
+/* Output Redirection common for all comparators COMP2, COMP4 and COMP6 */
+#define COMP_OUTPUT_TIM1BKIN COMP_CSR_COMPxOUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */
+#define COMP_OUTPUT_TIM1BKIN2 ((uint32_t)0x00000800) /*!< COMP output connected to TIM1 Break Input 2 (BKIN2) */
+/* Output Redirection specific to COMP2 */
+#define COMP_OUTPUT_TIM1OCREFCLR ((uint32_t)0x00001800) /*!< COMP output connected to TIM1 OCREF Clear */
+#define COMP_OUTPUT_TIM1IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM1 Input Capture 1 */
+#define COMP_OUTPUT_TIM2IC4 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 4 */
+#define COMP_OUTPUT_TIM2OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM2 OCREF Clear */
+/* Output Redirection specific to COMP4 */
+#define COMP_OUTPUT_TIM15IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM15 Input Capture 2 */
+#define COMP_OUTPUT_TIM15OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 OCREF Clear */
+/* Output Redirection specific to COMP6 */
+#define COMP_OUTPUT_TIM2IC2 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 2 */
+#define COMP_OUTPUT_COMP6_TIM2OCREFCLR ((uint32_t)0x00002000) /*!< COMP6 output connected to TIM2 OCREF Clear */
+#define COMP_OUTPUT_TIM16OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM16 OCREF Clear */
+#define COMP_OUTPUT_TIM16IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Input Capture 1 */
+
+#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_COMP6_TIM2OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM15IC2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM15OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR))
+/**
+ * @}
+ */
+#elif defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+/** @defgroup COMPEx_Output COMP Extended Output (STM32F303x8/STM32F334x8/STM32F328xx Product devices)
+ * @{
+ */
+#define COMP_OUTPUT_NONE ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */
+/* Output Redirection common for all comparators COMP2, COMP4 and COMP6 */
+#define COMP_OUTPUT_TIM1BKIN COMP_CSR_COMPxOUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */
+#define COMP_OUTPUT_TIM1BKIN2 ((uint32_t)0x00000800) /*!< COMP output connected to TIM1 Break Input 2 (BKIN2) */
+/* Output Redirection specific to COMP2 */
+#define COMP_OUTPUT_TIM1OCREFCLR ((uint32_t)0x00001800) /*!< COMP output connected to TIM1 OCREF Clear */
+#define COMP_OUTPUT_TIM1IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM1 Input Capture 1 */
+#define COMP_OUTPUT_TIM2IC4 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 4 */
+#define COMP_OUTPUT_TIM2OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM2 OCREF Clear */
+#define COMP_OUTPUT_TIM3IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM3 Input Capture 1 */
+#define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */
+/* Output Redirection specific to COMP4 */
+#define COMP_OUTPUT_TIM3IC3 ((uint32_t)0x00001800) /*!< COMP output connected to TIM3 Input Capture 3 */
+#define COMP_OUTPUT_TIM15IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM15 Input Capture 2 */
+#define COMP_OUTPUT_TIM15OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 OCREF Clear */
+#define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */
+/* Output Redirection specific to COMP6 */
+#define COMP_OUTPUT_TIM2IC2 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 2 */
+#define COMP_OUTPUT_COMP6_TIM2OCREFCLR ((uint32_t)0x00002000) /*!< COMP6 output connected to TIM2 OCREF Clear */
+#define COMP_OUTPUT_TIM16OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM16 OCREF Clear */
+#define COMP_OUTPUT_TIM16IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Input Capture 1 */
+
+#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_COMP6_TIM2OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3IC3) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM15IC2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM15OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR))
+/**
+ * @}
+ */
+#elif defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup COMPEx_Output COMP Extended Output (STM32F373xC/STM32F378xx Product devices)
+ * @{
+ */
+/* Output Redirection common for all comparators COMP1 and COMP2 */
+#define COMP_OUTPUT_NONE ((uint32_t)0x0000) /*!< COMP output isn't connected to other peripherals */
+#define COMP_OUTPUT_TIM3IC1 ((uint32_t)0x0200) /*!< COMP output connected to TIM1 Input Capture 1 */
+#define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x0300) /*!< COMP output connected to TIM3 OCREF Clear */
+#define COMP_OUTPUT_TIM2IC4 ((uint32_t)0x0400) /*!< COMP output connected to TIM2 Input Capture 4 */
+#define COMP_OUTPUT_TIM2OCREFCLR ((uint32_t)0x0500) /*!< COMP output connected to TIM2 OCREF Clear */
+/* Output Redirection specific to COMP1 */
+#define COMP_OUTPUT_TIM15BKIN ((uint32_t)0x0100) /*!< COMP output connected to TIM15 Break Input */
+#define COMP_OUTPUT_TIM5IC4 ((uint32_t)0x0600) /*!< COMP output connected to TIM5 Input Capture 4 */
+#define COMP_OUTPUT_TIM5OCREFCLR ((uint32_t)0x0700) /*!< COMP output connected to TIM5 OCREF Clear */
+/* Output Redirection specific to COMP2 */
+#define COMP_OUTPUT_TIM16BKIN ((uint32_t)0x0100) /*!< COMP output connected to TIM16 Break Input */
+#define COMP_OUTPUT_TIM4IC1 ((uint32_t)0x0200) /*!< COMP output connected to TIM4 Input Capture 1 */
+#define COMP_OUTPUT_TIM4OCREFCLR ((uint32_t)0x0300) /*!< COMP output connected to TIM4 OCREF Clear */
+
+#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM4IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM4OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM5IC4) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM5OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM15BKIN) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM16BKIN))
+/**
+ * @}
+ */
+#elif defined(STM32F302xE)
+/** @defgroup COMPEx_Output COMP Extended Output (STM32F302xE Product devices)
+ * @{
+ */
+#define COMP_OUTPUT_NONE ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */
+/* Output Redirection common for all comparators COMP1, COMP2, COMP4, COMP6 */
+#define COMP_OUTPUT_TIM1BKIN COMP_CSR_COMPxOUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */
+#define COMP_OUTPUT_TIM1BKIN2_BRK2 ((uint32_t)0x00000800) /*!< COMP output connected to TIM1 Break Input 2 (BKIN2) */
+#define COMP_OUTPUT_TIM1BKIN2 ((uint32_t)0x00001400) /*!< COMP output connected to TIM1 Break Input 2 */
+/* Output Redirection common for COMP1 and COMP2 */
+#define COMP_OUTPUT_TIM1OCREFCLR ((uint32_t)0x00001800) /*!< COMP output connected to TIM1 OCREF Clear */
+#define COMP_OUTPUT_TIM1IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM1 Input Capture 1 */
+#define COMP_OUTPUT_TIM2IC4 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 4 */
+#define COMP_OUTPUT_TIM2OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM2 OCREF Clear */
+#define COMP_OUTPUT_TIM3IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM3 Input Capture 1 */
+#define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */
+/* Output Redirection specific to COMP4 */
+#define COMP_OUTPUT_TIM3IC3 ((uint32_t)0x00001800) /*!< COMP output connected to TIM3 Input Capture 3 */
+#define COMP_OUTPUT_TIM15IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM15 Input Capture 2 */
+#define COMP_OUTPUT_TIM4IC2 ((uint32_t)0x00002400) /*!< COMP output connected to TIM4 Input Capture 2 */
+#define COMP_OUTPUT_TIM15OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 OCREF Clear */
+/* Output Redirection specific to COMP6 */
+#define COMP_OUTPUT_TIM2IC2 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 2 */
+#define COMP_OUTPUT_COMP6TIM2OCREFCLR ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 OCREF Clear */
+#define COMP_OUTPUT_TIM16OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM16 OCREF Clear */
+#define COMP_OUTPUT_TIM16IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Input Capture 1 */
+#define COMP_OUTPUT_TIM4IC4 ((uint32_t)0x00002C00) /*!< COMP output connected to TIM4 Input Capture 4 */
+
+#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_BRK2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3IC3) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM15IC2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM4IC2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM15OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \
+ ((OUTPUT) == COMP_OUTPUT_COMP6TIM2OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM4IC4))
+
+/**
+ * @}
+ */
+#elif defined(STM32F303xE) || defined(STM32F398xx)
+/** @defgroup COMPEx_Output COMP Extended Output (STM32F303xE/STM32F398xx Product devices)
+ * @{
+ */
+#define COMP_OUTPUT_NONE ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */
+/* Output Redirection common for all comparators COMP1...COMP7 */
+#define COMP_OUTPUT_TIM1BKIN COMP_CSR_COMPxOUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */
+#define COMP_OUTPUT_TIM1BKIN2 ((uint32_t)0x00000800) /*!< COMP output connected to TIM1 Break Input 2 (BKIN2) */
+#define COMP_OUTPUT_TIM8BKIN ((uint32_t)0x00000C00) /*!< COMP output connected to TIM8 Break Input (BKIN) */
+#define COMP_OUTPUT_TIM8BKIN2 ((uint32_t)0x00001000) /*!< COMP output connected to TIM8 Break Input 2 (BKIN2) */
+#define COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2 ((uint32_t)0x00001400) /*!< COMP output connected to TIM1 Break Input 2 and TIM8 Break Input 2 */
+#define COMP_OUTPUT_TIM20BKIN ((uint32_t)0x00003000) /*!< COMP output connected to TIM20 Break Input (BKIN) */
+#define COMP_OUTPUT_TIM20BKIN2 ((uint32_t)0x00003400) /*!< COMP output connected to TIM20 Break Input 2 (BKIN2) */
+#define COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2_TIM20BKIN2 ((uint32_t)0x00003800) /*!< COMP output connected to TIM1 Break Input 2, TIM8 Break Input 2 and TIM20 Break Input 2 */
+/* Output Redirection common for COMP1 and COMP2 */
+#define COMP_OUTPUT_TIM1OCREFCLR ((uint32_t)0x00001800) /*!< COMP output connected to TIM1 OCREF Clear */
+#define COMP_OUTPUT_TIM1IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM1 Input Capture 1 */
+#define COMP_OUTPUT_TIM2IC4 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 4 */
+#define COMP_OUTPUT_TIM2OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM2 OCREF Clear */
+#define COMP_OUTPUT_TIM3IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM3 Input Capture 1 */
+#define COMP_OUTPUT_TIM3OCREFCLR ((uint32_t)0x00002C00) /*!< COMP output connected to TIM3 OCREF Clear */
+/* Output Redirection specific to COMP2 */
+#define COMP_OUTPUT_TIM20OCREFCLR ((uint32_t)0x00003C00) /*!< COMP output connected to TIM20 OCREF Clear */
+/* Output Redirection specific to COMP3 */
+#define COMP_OUTPUT_TIM4IC1 ((uint32_t)0x00001C00) /*!< COMP output connected to TIM4 Input Capture 1 */
+#define COMP_OUTPUT_TIM3IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM3 Input Capture 2 */
+#define COMP_OUTPUT_TIM15IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 Input Capture 1 */
+#define COMP_OUTPUT_TIM15BKIN ((uint32_t)0x00002C00) /*!< COMP output connected to TIM15 Break Input (BKIN) */
+/* Output Redirection specific to COMP4 */
+#define COMP_OUTPUT_TIM3IC3 ((uint32_t)0x00001800) /*!< COMP output connected to TIM3 Input Capture 3 */
+#define COMP_OUTPUT_TIM8OCREFCLR ((uint32_t)0x00001C00) /*!< COMP output connected to TIM8 OCREF Clear */
+#define COMP_OUTPUT_TIM15IC2 ((uint32_t)0x00002000) /*!< COMP output connected to TIM15 Input Capture 2 */
+#define COMP_OUTPUT_TIM4IC2 ((uint32_t)0x00002400) /*!< COMP output connected to TIM4 Input Capture 2 */
+#define COMP_OUTPUT_TIM15OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM15 OCREF Clear */
+/* Output Redirection specific to COMP5 */
+#define COMP_OUTPUT_TIM2IC1 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 1 */
+#define COMP_OUTPUT_TIM17IC1 ((uint32_t)0x00002000) /*!< COMP output connected to TIM17 Input Capture 1 */
+#define COMP_OUTPUT_TIM4IC3 ((uint32_t)0x00002400) /*!< COMP output connected to TIM4 Input Capture 3 */
+#define COMP_OUTPUT_TIM16BKIN ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Break Input (BKIN) */
+/* Output Redirection specific to COMP6 */
+#define COMP_OUTPUT_TIM2IC2 ((uint32_t)0x00001800) /*!< COMP output connected to TIM2 Input Capture 2 */
+#define COMP_OUTPUT_COMP6TIM2OCREFCLR ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 OCREF Clear */
+#define COMP_OUTPUT_TIM16OCREFCLR ((uint32_t)0x00002400) /*!< COMP output connected to TIM16 OCREF Clear */
+#define COMP_OUTPUT_TIM16IC1 ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 Input Capture 1 */
+#define COMP_OUTPUT_TIM4IC4 ((uint32_t)0x00002C00) /*!< COMP output connected to TIM4 Input Capture 4 */
+/* Output Redirection specific to COMP7 */
+#define COMP_OUTPUT_TIM2IC3 ((uint32_t)0x00002000) /*!< COMP output connected to TIM2 Input Capture 3 */
+#define COMP_OUTPUT_TIM1IC2 ((uint32_t)0x00002400) /*!< COMP output connected to TIM1 Input Capture 2 */
+#define COMP_OUTPUT_TIM17OCREFCLR ((uint32_t)0x00002800) /*!< COMP output connected to TIM16 OCREF Clear */
+#define COMP_OUTPUT_TIM17BKIN ((uint32_t)0x00002C00) /*!< COMP output connected to TIM16 Break Input (BKIN) */
+#define IS_COMP_OUTPUT(OUTPUT) (((OUTPUT) == COMP_OUTPUT_NONE) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC4) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_COMP6TIM2OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM20OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM8BKIN) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM8BKIN2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM20BKIN) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM20BKIN2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1BKIN2_TIM8BKIN2_TIM20BKIN2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3IC2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM4IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM15IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM15BKIN) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM8OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM3IC3) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM4IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM15IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM4IC3) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM16BKIN) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM17IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM16IC1) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM4IC4) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM16OCREFCLR) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM2IC3) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM1IC2) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM17BKIN) || \
+ ((OUTPUT) == COMP_OUTPUT_TIM17OCREFCLR))
+/**
+ * @}
+ */
+#endif /* STM32F302xC */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+/** @defgroup COMPEx_WindowMode COMP Extended WindowMode (STM32F302xC/STM32F303xC/STM32F358xx Product devices)
+ * @{
+ */
+#define COMP_WINDOWMODE_DISABLED ((uint32_t)0x00000000) /*!< Window mode disabled */
+#define COMP_WINDOWMODE_ENABLED COMP_CSR_COMPxWNDWEN /*!< Window mode enabled: non inverting input of comparator X (x=2,4,6)
+ is connected to the non inverting input of comparator X-1 */
+#define IS_COMP_WINDOWMODE(WINDOWMODE) (((WINDOWMODE) == COMP_WINDOWMODE_DISABLED) || \
+ ((WINDOWMODE) == COMP_WINDOWMODE_ENABLED))
+
+#define COMP_CSR_COMPxWNDWEN_MASK COMP_CSR_COMPxWNDWEN /*!< COMP_CSR_COMPxWNDWEN mask */
+/**
+ * @}
+ */
+#elif defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup COMPEx_WindowMode COMP Extended WindowMode (STM32F373xC/STM32F378xx Product devices)
+ * @{
+ */
+#define COMP_WINDOWMODE_DISABLED ((uint32_t)0x00000000) /*!< Window mode disabled */
+#define COMP_WINDOWMODE_ENABLED ((uint32_t)COMP_CSR_COMPxWNDWEN) /*!< Window mode enabled: non inverting input of comparator 2
+ is connected to the non inverting input of comparator 1 (PA1) */
+#define IS_COMP_WINDOWMODE(WINDOWMODE) (((WINDOWMODE) == COMP_WINDOWMODE_DISABLED) || \
+ ((WINDOWMODE) == COMP_WINDOWMODE_ENABLED))
+
+#define COMP_CSR_COMPxWNDWEN_MASK COMP_CSR_COMPxWNDWEN /*!< COMP_CSR_COMPxWNDWEN mask */
+/**
+ * @}
+ */
+#else
+/** @defgroup COMPEx_WindowMode COMP Extended WindowMode (Other Product devices)
+ * @{
+ */
+#define COMP_WINDOWMODE_DISABLED ((uint32_t)0x00000000) /*!< Window mode disabled (not available) */
+
+#define IS_COMP_WINDOWMODE(WINDOWMODE) ((WINDOWMODE) == (WINDOWMODE)) /*!< Not available: check always true */
+
+#define COMP_CSR_COMPxWNDWEN_MASK ((uint32_t)0x00000000) /*!< Mask empty: feature not available */
+/**
+ * @}
+ */
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+/** @defgroup COMPEx_Mode COMP Extended Mode
+ * @{
+ */
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+
+/* Please refer to the electrical characteristics in the device datasheet for
+ the power consumption values */
+#define COMP_MODE_HIGHSPEED ((uint32_t)0x00000000) /*!< High Speed */
+#define COMP_MODE_MEDIUMSPEED COMP_CSR_COMPxMODE_0 /*!< Medium Speed */
+#define COMP_MODE_LOWPOWER COMP_CSR_COMPxMODE_1 /*!< Low power mode */
+#define COMP_MODE_ULTRALOWPOWER COMP_CSR_COMPxMODE /*!< Ultra-low power mode */
+
+#define IS_COMP_MODE(MODE) (((MODE) == COMP_MODE_HIGHSPEED) || \
+ ((MODE) == COMP_MODE_MEDIUMSPEED) || \
+ ((MODE) == COMP_MODE_LOWPOWER) || \
+ ((MODE) == COMP_MODE_ULTRALOWPOWER))
+
+#define COMP_CSR_COMPxMODE_MASK COMP_CSR_COMPxMODE /*!< COMP_CSR_COMPxMODE Mask */
+
+#else
+
+/*!< Power mode not available */
+#define IS_COMP_MODE(MODE) ((MODE) == (MODE)) /*!< Not available: check always true */
+
+#define COMP_CSR_COMPxMODE_MASK ((uint32_t)0x00000000) /*!< Mask empty: feature not available */
+
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F373xC || STM32F378xx */
+/**
+ * @}
+ */
+
+/** @defgroup COMPEx_Hysteresis COMP Extended Hysteresis
+ * @{
+ */
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+
+#define COMP_HYSTERESIS_NONE ((uint32_t)0x00000000) /*!< No hysteresis */
+#define COMP_HYSTERESIS_LOW COMP_CSR_COMPxHYST_0 /*!< Hysteresis level low */
+#define COMP_HYSTERESIS_MEDIUM COMP_CSR_COMPxHYST_1 /*!< Hysteresis level medium */
+#define COMP_HYSTERESIS_HIGH COMP_CSR_COMPxHYST /*!< Hysteresis level high */
+
+#define IS_COMP_HYSTERESIS(HYSTERESIS) (((HYSTERESIS) == COMP_HYSTERESIS_NONE) || \
+ ((HYSTERESIS) == COMP_HYSTERESIS_LOW) || \
+ ((HYSTERESIS) == COMP_HYSTERESIS_MEDIUM) || \
+ ((HYSTERESIS) == COMP_HYSTERESIS_HIGH))
+
+#define COMP_CSR_COMPxHYST_MASK COMP_CSR_COMPxHYST /*!< COMP_CSR_COMPxHYST Mask */
+
+#else
+
+#define COMP_HYSTERESIS_NONE ((uint32_t)0x00000000) /*!< No hysteresis */
+
+#define IS_COMP_HYSTERESIS(HYSTERESIS) ((HYSTERESIS) == (HYSTERESIS)) /*!< Not available: check always true */
+
+#define COMP_CSR_COMPxHYST_MASK ((uint32_t)0x00000000) /*!< Mask empty: feature not available */
+
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F373xC || STM32F378xx */
+/**
+ * @}
+ */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+/** @defgroup COMPEx_BlankingSrce COMP Extended Blanking Source (STM32F301x8/STM32F302x8/STM32F303x8/STM32F334x8/STM32F318xx/STM32F328xx Product devices)
+ * @{
+ */
+/* No blanking source can be selected for all comparators */
+#define COMP_BLANKINGSRCE_NONE ((uint32_t)0x00000000) /*!< No blanking source */
+/* Blanking source for COMP2 */
+#define COMP_BLANKINGSRCE_TIM1OC5 COMP_CSR_COMPxBLANKING_0 /*!< TIM1 OC5 selected as blanking source for compartor */
+#define COMP_BLANKINGSRCE_TIM2OC3 COMP_CSR_COMPxBLANKING_1 /*!< TIM2 OC3 selected as blanking source for compartor */
+#define COMP_BLANKINGSRCE_TIM3OC3 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM3 OC3 selected as blanking source for compartor */
+/* Blanking source for COMP4 */
+#define COMP_BLANKINGSRCE_TIM3OC4 COMP_CSR_COMPxBLANKING_0 /*!< TIM3 OC4 selected as blanking source for compartor */
+#define COMP_BLANKINGSRCE_TIM15OC1 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM15 OC1 selected as blanking source for compartor */
+/* Blanking source for COMP6 */
+#define COMP_BLANKINGSRCE_TIM2OC4 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM2 OC4 selected as blanking source for compartor */
+#define COMP_BLANKINGSRCE_TIM15OC2 COMP_CSR_COMPxBLANKING_2 /*!< TIM15 OC2 selected as blanking source for compartor */
+#define IS_COMP_BLANKINGSRCE(SOURCE) (((SOURCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM3OC3) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM15OC1) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM15OC2))
+
+/* STM32F301x6/x8, STM32F302x6/x8, STM32F303x6/x8, STM32F334x4/6/8, STM32F318xx/STM32F328xx devices comparator instances blanking source values */
+#define IS_COMP_BLANKINGSRCE_INSTANCE(INSTANCE, BLANKINGSRCE) \
+ ((((INSTANCE) == COMP2) && \
+ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC3))) \
+ || \
+ (((INSTANCE) == COMP4) && \
+ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC1))) \
+ || \
+ (((INSTANCE) == COMP6) && \
+ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC2))))
+
+#define COMP_CSR_COMPxBLANKING_MASK COMP_CSR_COMPxBLANKING /*!< COMP_CSR_COMPxBLANKING mask */
+
+/**
+ * @}
+ */
+
+/** @defgroup COMPEx_ExtiLineEvent COMP Extended EXTI Line Event (STM32F301x8/STM32F302x8/STM32F303x8/STM32F334x8/STM32F318xx/STM32F328xx Product devices)
+ * Elements values convention: XXXXZYYY
+ * - XXXX : Interrupt mask in the register list where Z equal 0x0
+ * - YYY : Interrupt mask in the register list where Z equal 0x1
+ * - Z : register index(4bits)
+ * - 0x0: EMR/IMR/RTSR/FTSR register
+ * - 0x1: EMR2/IMR2/RTSR2/FTSR2 register
+ * @{
+ */
+#define COMP_EXTI_LINE_MASK ((uint32_t)0xffff0fff) /*!< Mask on possible line values */
+#define COMP_EXTI_LINE_REG_MASK ((uint32_t)0x00001000) /*!< Mask on possible register values */
+#define COMP_EXTI_LINE_COMP2_EVENT ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to COMP2 */
+#define COMP_EXTI_LINE_COMP4_EVENT ((uint32_t)0x40000000) /*!< External interrupt line 30 Connected to COMP4 */
+#define COMP_EXTI_LINE_COMP6_EVENT ((uint32_t)0x00001001) /*!< External interrupt line 32 Connected to COMP6 */
+
+/**
+ * @}
+ */
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F302xE) ||\
+ defined(STM32F302xC)
+/** @defgroup COMPEx_BlankingSrce COMP Extended Blanking Source (STM32F302xE/STM32F302xC Product devices)
+ * @{
+ */
+/* No blanking source can be selected for all comparators */
+#define COMP_BLANKINGSRCE_NONE ((uint32_t)0x00000000) /*!< No blanking source */
+/* Blanking source common for COMP1 and COMP2 */
+#define COMP_BLANKINGSRCE_TIM1OC5 COMP_CSR_COMPxBLANKING_0 /*!< TIM1 OC5 selected as blanking source for compartor */
+/* Blanking source common for COMP1 and COMP2 */
+#define COMP_BLANKINGSRCE_TIM2OC3 COMP_CSR_COMPxBLANKING_1 /*!< TIM2 OC3 selected as blanking source for compartor */
+/* Blanking source common for COMP1 and COMP2 */
+#define COMP_BLANKINGSRCE_TIM3OC3 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM3 OC3 selected as blanking source for comparator */
+/* Blanking source for COMP4 */
+#define COMP_BLANKINGSRCE_TIM3OC4 COMP_CSR_COMPxBLANKING_0 /*!< TIM3 OC4 selected as blanking source for comparator */
+#define COMP_BLANKINGSRCE_TIM15OC1 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM15 OC1 selected as blanking source for comparator */
+/* Blanking source for COMP6 */
+#define COMP_BLANKINGSRCE_TIM2OC4 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM2 OC4 selected as blanking source for comparator */
+#define COMP_BLANKINGSRCE_TIM15OC2 COMP_CSR_COMPxBLANKING_2 /*!< TIM15 OC2 selected as blanking source for comparator */
+
+#define IS_COMP_BLANKINGSRCE(SOURCE) (((SOURCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM3OC3) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM15OC1) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM15OC2))
+
+/* STM32F302xB/STM32F302xC/STM32F302xE devices comparator instances blanking source values */
+#define IS_COMP_BLANKINGSRCE_INSTANCE(INSTANCE, BLANKINGSRCE) \
+ (((((INSTANCE) == COMP1) || ((INSTANCE) == COMP2)) && \
+ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC3))) \
+ || \
+ (((INSTANCE) == COMP4) && \
+ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC1))) \
+ || \
+ (((INSTANCE) == COMP6) && \
+ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC2))))
+
+#define COMP_CSR_COMPxBLANKING_MASK COMP_CSR_COMPxBLANKING /*!< COMP_CSR_COMPxBLANKING mask */
+
+/**
+ * @}
+ */
+
+/** @defgroup COMPEx_ExtiLineEvent COMP Extended EXTI Line Event (STM32F302xC Product devices)
+ * Elements values convention: XXXXZYYY
+ * - XXXX : Interrupt mask in the register list where Z equal 0x0
+ * - YYY : Interrupt mask in the register list where Z equal 0x1
+ * - Z : register index(4bits)
+ * - 0x0: EMR/IMR/RTSR/FTSR register
+ * - 0x1: EMR2/IMR2/RTSR2/FTSR2 register
+ * @{
+ */
+#define COMP_EXTI_LINE_MASK ((uint32_t)0xffff0fff) /*!< Mask on possible line values */
+#define COMP_EXTI_LINE_REG_MASK ((uint32_t)0x00001000) /*!< Mask on possible register values */
+#define COMP_EXTI_LINE_COMP1_EVENT ((uint32_t)0x00200000) /*!< External interrupt line 21 Connected to COMP1 */
+#define COMP_EXTI_LINE_COMP2_EVENT ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to COMP2 */
+#define COMP_EXTI_LINE_COMP4_EVENT ((uint32_t)0x40000000) /*!< External interrupt line 30 Connected to COMP4 */
+#define COMP_EXTI_LINE_COMP6_EVENT ((uint32_t)0x00001001) /*!< External interrupt line 32 Connected to COMP6 */
+
+/**
+ * @}
+ */
+#endif /* STM32F302xE || */
+ /* STM32F302xC */
+
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx)
+/** @defgroup COMPEx_BlankingSrce COMP Extended Blanking Source (STM32F303xE/STM32F398xx/STM32F303xC/STM32F358xx Product devices)
+ * @{
+ */
+/* No blanking source can be selected for all comparators */
+#define COMP_BLANKINGSRCE_NONE ((uint32_t)0x00000000) /*!< No blanking source */
+/* Blanking source common for COMP1, COMP2, COMP3 and COMP7 */
+#define COMP_BLANKINGSRCE_TIM1OC5 COMP_CSR_COMPxBLANKING_0 /*!< TIM1 OC5 selected as blanking source for comparator */
+/* Blanking source common for COMP1 and COMP2 */
+#define COMP_BLANKINGSRCE_TIM2OC3 COMP_CSR_COMPxBLANKING_1 /*!< TIM2 OC5 selected as blanking source for comparator */
+/* Blanking source common for COMP1, COMP2 and COMP5 */
+#define COMP_BLANKINGSRCE_TIM3OC3 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM2 OC3 selected as blanking source for comparator */
+/* Blanking source common for COMP3 and COMP6 */
+#define COMP_BLANKINGSRCE_TIM2OC4 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM2 OC4 selected as blanking source for comparator */
+/* Blanking source common for COMP4, COMP5, COMP6 and COMP7 */
+#define COMP_BLANKINGSRCE_TIM8OC5 COMP_CSR_COMPxBLANKING_1 /*!< TIM8 OC5 selected as blanking source for comparator */
+/* Blanking source for COMP4 */
+#define COMP_BLANKINGSRCE_TIM3OC4 COMP_CSR_COMPxBLANKING_0 /*!< TIM3 OC4 selected as blanking source for comparator */
+#define COMP_BLANKINGSRCE_TIM15OC1 (COMP_CSR_COMPxBLANKING_0|COMP_CSR_COMPxBLANKING_1) /*!< TIM15 OC1 selected as blanking source for comparator */
+/* Blanking source common for COMP6 and COMP7 */
+#define COMP_BLANKINGSRCE_TIM15OC2 COMP_CSR_COMPxBLANKING_2 /*!< TIM15 OC2 selected as blanking source for comparator */
+
+#define IS_COMP_BLANKINGSRCE(SOURCE) (((SOURCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM3OC3) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM8OC5) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM15OC1) || \
+ ((SOURCE) == COMP_BLANKINGSRCE_TIM15OC2))
+
+/* STM32F303xE/STM32F398xx/STM32F303xB/STM32F303xC/STM32F358xx devices comparator instances blanking source values */
+#define IS_COMP_BLANKINGSRCE_INSTANCE(INSTANCE, BLANKINGSRCE) \
+ (((((INSTANCE) == COMP1) || ((INSTANCE) == COMP2)) && \
+ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC3) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC3))) \
+ || \
+ (((INSTANCE) == COMP3) && \
+ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC4))) \
+ || \
+ (((INSTANCE) == COMP4) && \
+ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC4) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM8OC5) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC1))) \
+ || \
+ (((INSTANCE) == COMP5) && \
+ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM8OC5) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM3OC3))) \
+ || \
+ (((INSTANCE) == COMP6) && \
+ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM8OC5) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM2OC4) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC2))) \
+ || \
+ (((INSTANCE) == COMP7) && \
+ (((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM1OC5) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM8OC5) || \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_TIM15OC2))))
+
+#define COMP_CSR_COMPxBLANKING_MASK COMP_CSR_COMPxBLANKING /*!< COMP_CSR_COMPxBLANKING mask */
+
+/**
+ * @}
+ */
+
+/** @defgroup COMPEx_ExtiLineEvent COMP Extended EXTI Line Event (STM32F303xE/STM32F398xx/STM32F303xC/STM32F358xx Product devices)
+ * Elements values convention: XXXXZYYY
+ * - XXXX : Interrupt mask in the register list where Z equal 0x0
+ * - YYY : Interrupt mask in the register list where Z equal 0x1
+ * - Z : register index(4bits)
+ * - 0x0: EMR/IMR/RTSR/FTSR register
+ * - 0x1: EMR2/IMR2/RTSR2/FTSR2 register
+ * @{
+ */
+#define COMP_EXTI_LINE_MASK ((uint32_t)0xffff0fff) /*!< Mask on possible line values */
+#define COMP_EXTI_LINE_REG_MASK ((uint32_t)0x00001000) /*!< Mask on possible register values */
+#define COMP_EXTI_LINE_COMP1_EVENT ((uint32_t)0x00200000) /*!< External interrupt line 21 Connected to COMP1 */
+#define COMP_EXTI_LINE_COMP2_EVENT ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to COMP2 */
+#define COMP_EXTI_LINE_COMP3_EVENT ((uint32_t)0x20000000) /*!< External interrupt line 29 Connected to COMP3 */
+#define COMP_EXTI_LINE_COMP4_EVENT ((uint32_t)0x40000000) /*!< External interrupt line 30 Connected to COMP4 */
+#define COMP_EXTI_LINE_COMP5_EVENT ((uint32_t)0x80000000) /*!< External interrupt line 31 Connected to COMP5 */
+#define COMP_EXTI_LINE_COMP6_EVENT ((uint32_t)0x00001001) /*!< External interrupt line 32 Connected to COMP6 */
+#define COMP_EXTI_LINE_COMP7_EVENT ((uint32_t)0x00001002) /*!< External interrupt line 33 Connected to COMP7 */
+
+/**
+ * @}
+ */
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F373xC) ||defined(STM32F378xx)
+/** @defgroup COMPEx_BlankingSrce COMP Extended Blanking Source (STM32F373xC/STM32F378xx Product devices)
+ * @{
+ */
+/* No blanking source can be selected for all comparators */
+#define COMP_BLANKINGSRCE_NONE ((uint32_t)0x00000000) /*!< No blanking source */
+
+#define IS_COMP_BLANKINGSRCE(SOURCE) ((SOURCE) == (SOURCE)) /*!< Not available: check always true */
+
+/* STM32F373xB/STM32F373xC/STM32F378xx devices comparator instances blanking source values */
+#define IS_COMP_BLANKINGSRCE_INSTANCE(INSTANCE, BLANKINGSRCE) \
+ ((((INSTANCE) == COMP1) || ((INSTANCE) == COMP2)) && \
+ ((BLANKINGSRCE) == COMP_BLANKINGSRCE_NONE))
+
+#define COMP_CSR_COMPxBLANKING_MASK ((uint32_t)0x00000000) /*!< Mask empty: feature not available */
+
+/**
+ * @}
+ */
+
+/** @defgroup COMPEx_ExtiLineEvent COMP Extended EXTI Line Event (STM32F373xC/STM32F378xx Product devices)
+ * Elements values convention: XXXX0000
+ * - XXXX : Interrupt mask in the EMR/IMR/RTSR/FTSR register
+ * @{
+ */
+#define COMP_EXTI_LINE_COMP1_EVENT ((uint32_t)0x00200000) /*!< External interrupt line 21 Connected to COMP1 */
+#define COMP_EXTI_LINE_COMP2_EVENT ((uint32_t)0x00400000) /*!< External interrupt line 22 Connected to COMP2 */
+
+/**
+ * @}
+ */
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/* CSR register reset value */
+#define COMP_CSR_RESET_VALUE ((uint32_t)0x00000000)
+#define COMP_CSR_RESET_PARAMETERS_MASK ((uint32_t)0x00003FFF)
+#define COMP_CSR_UPDATE_PARAMETERS_MASK ((uint32_t)0x00003FFE)
+/* CSR COMP1/COMP2 shift */
+#define COMP_CSR_COMP1_SHIFT 0U
+#define COMP_CSR_COMP2_SHIFT 16U
+#else
+/* CSR register reset value */
+#define COMP_CSR_RESET_VALUE ((uint32_t)0x00000000)
+#endif /* STM32F373xC || STM32F378xx */
+/* CSR masks redefinition for internal use */
+#define COMP_CSR_COMPxINSEL_MASK COMP_CSR_COMPxINSEL /*!< COMP_CSR_COMPxINSEL Mask */
+#define COMP_CSR_COMPxOUTSEL_MASK COMP_CSR_COMPxOUTSEL /*!< COMP_CSR_COMPxOUTSEL Mask */
+#define COMP_CSR_COMPxPOL_MASK COMP_CSR_COMPxPOL /*!< COMP_CSR_COMPxPOL Mask */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup USARTEx_Exported_Macros USART Extended Exported Macros
+ * @{
+ */
+#if defined(STM32F373xC) ||defined(STM32F378xx)
+/**
+ * @brief Checks whether the specified EXTI line flag is set or not.
+ * @param __FLAG__: specifies the COMP Exti sources to be checked.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval The state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (EXTI->PR & (__FLAG__))
+
+/**
+ * @brief Clear the COMP Exti flags.
+ * @param __FLAG__: specifies the COMP Exti sources to be cleared.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (EXTI->PR = (__FLAG__))
+
+/**
+ * @brief Enable the COMP Exti Line.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be enabled.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (EXTI->IMR |= (__EXTILINE__))
+
+/**
+ * @brief Disable the COMP Exti Line.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be disabled.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (EXTI->IMR &= ~(__EXTILINE__))
+
+/**
+ * @brief Enable the Exti Line rising edge trigger.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be enabled.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (EXTI->RTSR |= (__EXTILINE__))
+
+/**
+ * @brief Disable the Exti Line rising edge trigger.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be disabled.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (EXTI->RTSR &= ~(__EXTILINE__))
+
+/**
+ * @brief Enable the Exti Line falling edge trigger.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be enabled.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (EXTI->FTSR |= (__EXTILINE__))
+
+/**
+ * @brief Disable the Exti Line falling edge trigger.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be disabled.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (EXTI->FTSR &= ~(__EXTILINE__))
+
+/**
+ * @brief Init a comparator instance
+ * @param __HANDLE__: specifies the COMP handle
+ * @note The common output selection is checked versus the COMP instance to set the right output configuration
+ * @retval None.
+ */
+#define COMP_OUTPUT_COMP2_TIM2IC4 ((uint32_t)0x0400) /*!< COMP2 output connected to TIM2 Input Capture 4 */
+#define COMP_OUTPUT_COMP2_TIM2OCREFCLR ((uint32_t)0x0500) /*!< COMP2 output connected to TIM4 OCREF Clear */
+#define COMP_OUTPUT_COMP2_TIM3IC1 ((uint32_t)0x0600) /*!< COMP2 output connected to TIM3 Input Capture 1 */
+#define COMP_OUTPUT_COMP2_TIM3OCREFCLR ((uint32_t)0x0700) /*!< COMP2 output connected to TIM3 OCREF Clear */
+
+#define COMP_INIT(__HANDLE__) \
+ do { \
+ uint32_t regshift = COMP_CSR_COMP1_SHIFT; \
+ uint32_t compoutput = (__HANDLE__)->Init.Output; \
+ \
+ if((__HANDLE__)->Instance == COMP2) \
+ { \
+ regshift = COMP_CSR_COMP2_SHIFT; \
+ switch((__HANDLE__)->Init.Output) \
+ { \
+ case COMP_OUTPUT_TIM2IC4: \
+ compoutput = COMP_OUTPUT_COMP2_TIM2IC4; \
+ break; \
+ case COMP_OUTPUT_TIM2OCREFCLR: \
+ compoutput = COMP_OUTPUT_COMP2_TIM2OCREFCLR; \
+ break; \
+ case COMP_OUTPUT_TIM3IC1: \
+ compoutput = COMP_OUTPUT_COMP2_TIM3IC1; \
+ break; \
+ case COMP_OUTPUT_TIM3OCREFCLR: \
+ compoutput = COMP_OUTPUT_COMP2_TIM3OCREFCLR; \
+ break; \
+ default: \
+ break; \
+ } \
+ } \
+ \
+ MODIFY_REG(COMP->CSR, \
+ (COMP_CSR_COMPxINSEL | COMP_CSR_COMPxNONINSEL_MASK | \
+ COMP_CSR_COMPxOUTSEL | COMP_CSR_COMPxPOL | \
+ COMP_CSR_COMPxHYST | COMP_CSR_COMPxMODE) << regshift, \
+ ((__HANDLE__)->Init.InvertingInput | \
+ (__HANDLE__)->Init.NonInvertingInput | \
+ compoutput | \
+ (__HANDLE__)->Init.OutputPol | \
+ (__HANDLE__)->Init.Hysteresis | \
+ (__HANDLE__)->Init.Mode) << regshift); \
+ \
+ if((__HANDLE__)->Init.WindowMode != COMP_WINDOWMODE_DISABLED) \
+ { \
+ COMP->CSR |= COMP_CSR_WNDWEN; \
+ } \
+ } while(0)
+
+/**
+ * @brief DeInit a comparator instance
+ * @param __HANDLE__: specifies the COMP handle
+ * @retval None.
+ */
+#define COMP_DEINIT(__HANDLE__) \
+ do { \
+ uint32_t regshift = COMP_CSR_COMP1_SHIFT; \
+ \
+ if((__HANDLE__)->Instance == COMP2) \
+ { \
+ regshift = COMP_CSR_COMP2_SHIFT; \
+ } \
+ MODIFY_REG(COMP->CSR, \
+ COMP_CSR_RESET_PARAMETERS_MASK << regshift, \
+ COMP_CSR_RESET_VALUE << regshift); \
+ } while(0)
+
+/**
+ * @brief Start a comparator instance
+ * @param __HANDLE__: specifies the COMP handle
+ * @retval None.
+ */
+#define COMP_START(__HANDLE__) \
+ do { \
+ uint32_t regshift = COMP_CSR_COMP1_SHIFT; \
+ \
+ if((__HANDLE__)->Instance == COMP2) \
+ { \
+ regshift = COMP_CSR_COMP2_SHIFT; \
+ } \
+ SET_BIT(COMP->CSR, (uint32_t)COMP_CSR_COMPxEN << regshift); \
+ } while(0)
+
+/**
+ * @brief Stop a comparator instance
+ * @param __HANDLE__: specifies the COMP handle
+ * @retval None.
+ */
+#define COMP_STOP(__HANDLE__) \
+ do { \
+ uint32_t regshift = COMP_CSR_COMP1_SHIFT; \
+ \
+ if((__HANDLE__)->Instance == COMP2) \
+ { \
+ regshift = COMP_CSR_COMP2_SHIFT; \
+ } \
+ CLEAR_BIT(COMP->CSR, (uint32_t)COMP_CSR_COMPxEN << regshift); \
+ } while(0)
+
+/**
+ * @brief Lock a comparator instance
+ * @param __HANDLE__: specifies the COMP handle
+ * @retval None.
+ */
+#define COMP_LOCK(__HANDLE__) \
+ do { \
+ uint32_t regshift = COMP_CSR_COMP1_SHIFT; \
+ \
+ if((__HANDLE__)->Instance == COMP2) \
+ { \
+ regshift = COMP_CSR_COMP2_SHIFT; \
+ } \
+ SET_BIT(COMP->CSR, (uint32_t)COMP_CSR_COMPxLOCK << regshift); \
+ } while(0)
+
+#else
+/**
+ * @brief Checks whether the specified EXTI line flag is set or not.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be checked.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval The state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_COMP_EXTI_GET_FLAG(__EXTILINE__) \
+ ((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->PR2 & (__EXTILINE__)) : (EXTI->PR & (__EXTILINE__)))
+
+/**
+ * @brief Clear the COMP Exti flags.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be cleared.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_CLEAR_FLAG(__EXTILINE__) \
+ ((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->PR2 = (__EXTILINE__)) : (EXTI->PR = (__EXTILINE__)))
+
+/**
+ * @brief Enable the COMP Exti Line.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be enabled.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) \
+ ((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->IMR2 |= (__EXTILINE__)) : (EXTI->IMR |= (__EXTILINE__)))
+
+/**
+ * @brief Disable the COMP Exti Line.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be disabled.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) \
+ ((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->IMR2 &= ~(__EXTILINE__)) : (EXTI->IMR &= ~(__EXTILINE__)))
+
+/**
+ * @brief Enable the Exti Line rising edge trigger.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be enabled.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) \
+ ((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->RTSR2 |= (__EXTILINE__)) : (EXTI->RTSR |= (__EXTILINE__)))
+
+/**
+ * @brief Disable the Exti Line rising edge trigger.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be disabled.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) \
+ ((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->RTSR2 &= ~(__EXTILINE__)) : (EXTI->RTSR &= ~(__EXTILINE__)))
+
+/**
+ * @brief Enable the Exti Line falling edge trigger.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be enabled.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) \
+ ((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->FTSR2 |= (__EXTILINE__)) : (EXTI->FTSR |= (__EXTILINE__)))
+
+/**
+ * @brief Disable the Exti Line falling edge trigger.
+ * @param __EXTILINE__: specifies the COMP Exti sources to be disabled.
+ * This parameter can be a value of @ref COMPEx_ExtiLineEvent
+ * @retval None.
+ */
+#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) \
+ ((((__EXTILINE__) & COMP_EXTI_LINE_REG_MASK) != RESET) ? (EXTI->FTSR2 &= ~(__EXTILINE__)) : (EXTI->FTSR &= ~(__EXTILINE__)))
+
+
+/**
+ * @brief Init a comparator instance
+ * @param __HANDLE__: specifies the COMP handle
+ * @retval None.
+ */
+#define COMP_INIT(__HANDLE__) \
+ do { \
+ __IO uint32_t csrreg = 0; \
+ \
+ csrreg = READ_REG((__HANDLE__)->Instance->CSR); \
+ MODIFY_REG(csrreg, COMP_CSR_COMPxINSEL_MASK, (__HANDLE__)->Init.InvertingInput); \
+ MODIFY_REG(csrreg, COMP_CSR_COMPxNONINSEL_MASK, (__HANDLE__)->Init.NonInvertingInput); \
+ MODIFY_REG(csrreg, COMP_CSR_COMPxBLANKING_MASK, (__HANDLE__)->Init.BlankingSrce); \
+ MODIFY_REG(csrreg, COMP_CSR_COMPxOUTSEL_MASK, (__HANDLE__)->Init.Output); \
+ MODIFY_REG(csrreg, COMP_CSR_COMPxPOL_MASK, (__HANDLE__)->Init.OutputPol); \
+ MODIFY_REG(csrreg, COMP_CSR_COMPxHYST_MASK, (__HANDLE__)->Init.Hysteresis); \
+ MODIFY_REG(csrreg, COMP_CSR_COMPxMODE_MASK, (__HANDLE__)->Init.Mode); \
+ MODIFY_REG(csrreg, COMP_CSR_COMPxWNDWEN_MASK, (__HANDLE__)->Init.WindowMode); \
+ WRITE_REG((__HANDLE__)->Instance->CSR, csrreg); \
+ } while(0)
+
+/**
+ * @brief DeInit a comparator instance
+ * @param __HANDLE__: specifies the COMP handle
+ * @retval None.
+ */
+#define COMP_DEINIT(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->CSR, COMP_CSR_RESET_VALUE)
+
+/**
+ * @brief Start a comparator instance
+ * @param __HANDLE__: specifies the COMP handle
+ * @retval None.
+ */
+#define COMP_START(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_COMPxEN)
+
+/**
+ * @brief Stop a comparator instance
+ * @param __HANDLE__: specifies the COMP handle
+ * @retval None.
+ */
+#define COMP_STOP(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_COMPxEN)
+
+/**
+ * @brief Lock a comparator instance
+ * @param __HANDLE__: specifies the COMP handle
+ * @retval None.
+ */
+#define COMP_LOCK(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, COMP_CSR_COMPxLOCK)
+
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+/**
+ * @brief Get the specified EXTI line for a comparator instance
+ * @param __INSTANCE__: specifies the COMP instance.
+ * @retval value of @ref COMPEx_ExtiLineEvent
+ */
+#define __HAL_COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP2) ? COMP_EXTI_LINE_COMP2_EVENT : \
+ ((__INSTANCE__) == COMP4) ? COMP_EXTI_LINE_COMP4_EVENT : \
+ COMP_EXTI_LINE_COMP6_EVENT)
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F302xE) || \
+ defined(STM32F302xC)
+/**
+ * @brief Get the specified EXTI line for a comparator instance
+ * @param __INSTANCE__: specifies the COMP instance.
+ * @retval value of @ref COMPEx_ExtiLineEvent
+ */
+#define __HAL_COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1_EVENT : \
+ ((__INSTANCE__) == COMP2) ? COMP_EXTI_LINE_COMP2_EVENT : \
+ ((__INSTANCE__) == COMP4) ? COMP_EXTI_LINE_COMP4_EVENT : \
+ COMP_EXTI_LINE_COMP6_EVENT)
+#endif /* STM32F302xE || */
+ /* STM32F302xC */
+
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx)
+/**
+ * @brief Get the specified EXTI line for a comparator instance
+ * @param __INSTANCE__: specifies the COMP instance.
+ * @retval value of @ref COMPEx_ExtiLineEvent
+ */
+#define __HAL_COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1_EVENT : \
+ ((__INSTANCE__) == COMP2) ? COMP_EXTI_LINE_COMP2_EVENT : \
+ ((__INSTANCE__) == COMP3) ? COMP_EXTI_LINE_COMP3_EVENT : \
+ ((__INSTANCE__) == COMP4) ? COMP_EXTI_LINE_COMP4_EVENT : \
+ ((__INSTANCE__) == COMP5) ? COMP_EXTI_LINE_COMP5_EVENT : \
+ ((__INSTANCE__) == COMP6) ? COMP_EXTI_LINE_COMP6_EVENT : \
+ COMP_EXTI_LINE_COMP7_EVENT)
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F373xC) ||defined(STM32F378xx)
+/**
+ * @brief Get the specified EXTI line for a comparator instance
+ * @param __INSTANCE__: specifies the COMP instance.
+ * @retval value of @ref COMPEx_ExtiLineEvent
+ */
+#define __HAL_COMP_GET_EXTI_LINE(__INSTANCE__) (((__INSTANCE__) == COMP1) ? COMP_EXTI_LINE_COMP1_EVENT : \
+ COMP_EXTI_LINE_COMP2_EVENT)
+#endif /* STM32F373xC || STM32F378xx */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions ****************************/
+/* IO operation functions *****************************************************/
+/* Peripheral Control functions ***********************************************/
+/* Peripheral State and Error functions ***************************************/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_COMP_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_conf.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,331 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_conf.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief HAL configuration file.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_CONF_H
+#define __STM32F3xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+#define HAL_MODULE_ENABLED
+#define HAL_ADC_MODULE_ENABLED
+#define HAL_CAN_MODULE_ENABLED
+#define HAL_CEC_MODULE_ENABLED
+#define HAL_COMP_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_CRC_MODULE_ENABLED
+#define HAL_DAC_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_SRAM_MODULE_ENABLED
+#define HAL_NOR_MODULE_ENABLED
+#define HAL_NAND_MODULE_ENABLED
+#define HAL_PCCARD_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_HRTIM_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_I2S_MODULE_ENABLED
+#define HAL_IRDA_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_OPAMP_MODULE_ENABLED
+#define HAL_PCD_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_RTC_MODULE_ENABLED
+#define HAL_SDADC_MODULE_ENABLED
+#define HAL_SMARTCARD_MODULE_ENABLED
+#define HAL_SMBUS_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_TSC_MODULE_ENABLED
+#define HAL_UART_MODULE_ENABLED
+#define HAL_USART_MODULE_ENABLED
+#define HAL_WWDG_MODULE_ENABLED
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+/**
+ * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
+ * Timeout value
+ */
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT ((uint32_t)500) /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup
+ * Timeout value
+ */
+#if !defined (HSI_STARTUP_TIMEOUT)
+ #define HSI_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSI start up */
+#endif /* HSI_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal Low Speed oscillator (LSI) value.
+ */
+#if !defined (LSI_VALUE)
+ #define LSI_VALUE ((uint32_t)40000)
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature. */
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+/**
+ * @brief External clock source for I2S peripheral
+ * This value is used by the I2S HAL module to compute the I2S clock source
+ * frequency, this source is inserted directly through I2S_CKIN pad.
+ * - External clock generated through external PLL component on EVAL 303 (based on MCO or crystal)
+ * - External clock not generated on EVAL 373
+ */
+#if !defined (EXTERNAL_CLOCK_VALUE)
+ #define EXTERNAL_CLOCK_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY ((uint32_t)(1<<__NVIC_PRIO_BITS) - 1) /*!< tick interrupt priority (lowest by default) */
+#define USE_RTOS 0
+#define PREFETCH_ENABLE 1
+#define INSTRUCTION_CACHE_ENABLE 0
+#define DATA_CACHE_ENABLE 0
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+/*#define USE_FULL_ASSERT 1*/
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+ #include "stm32f3xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+ #include "stm32f3xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+ #include "stm32f3xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+ #include "stm32f3xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+ #include "stm32f3xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+ #include "stm32f3xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f3xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+ #include "stm32f3xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+ #include "stm32f3xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+ #include "stm32f3xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+ #include "stm32f3xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+ #include "stm32f3xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+ #include "stm32f3xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+ #include "stm32f3xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+ #include "stm32f3xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_HRTIM_MODULE_ENABLED
+ #include "stm32f3xx_hal_hrtim.h"
+#endif /* HAL_HRTIM_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f3xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f3xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f3xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f3xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_OPAMP_MODULE_ENABLED
+ #include "stm32f3xx_hal_opamp.h"
+#endif /* HAL_OPAMP_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f3xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f3xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f3xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SDADC_MODULE_ENABLED
+ #include "stm32f3xx_hal_sdadc.h"
+#endif /* HAL_SDADC_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f3xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32f3xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f3xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f3xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_TSC_MODULE_ENABLED
+ #include "stm32f3xx_hal_tsc.h"
+#endif /* HAL_TSC_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f3xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f3xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f3xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t* file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_cortex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,190 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_cortex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of CORTEX HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_CORTEX_H
+#define __STM32F3xx_HAL_CORTEX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CORTEX
+ * @{
+ */
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants
+ * @{
+ */
+
+/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group
+ * @{
+ */
+
+#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007) /*!< 0 bits for pre-emption priority
+ 4 bits for subpriority */
+#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006) /*!< 1 bits for pre-emption priority
+ 3 bits for subpriority */
+#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority
+ 2 bits for subpriority */
+#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority
+ 1 bits for subpriority */
+#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority
+ 0 bits for subpriority */
+
+#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_1) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_2) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_3) || \
+ ((GROUP) == NVIC_PRIORITYGROUP_4))
+
+#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
+
+#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10)
+
+/**
+ * @}
+ */
+
+/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source
+ * @{
+ */
+#define SYSTICK_CLKSOURCE_HCLK_DIV8 ((uint32_t)0x00000000)
+#define SYSTICK_CLKSOURCE_HCLK ((uint32_t)0x00000004)
+#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \
+ ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported Macros -----------------------------------------------------------*/
+/** @defgroup CORTEX_Exported_Macros CORTEX Exported Macros
+ * @{
+ */
+
+/** @brief Configures the SysTick clock source.
+ * @param __CLKSRC__: specifies the SysTick clock source.
+ * This parameter can be one of the following values:
+ * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
+ * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
+ * @retval None
+ */
+#define __HAL_CORTEX_SYSTICKCLK_CONFIG(__CLKSRC__) \
+ do { \
+ if ((__CLKSRC__) == SYSTICK_CLKSOURCE_HCLK) \
+ { \
+ SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK; \
+ } \
+ else \
+ SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK; \
+ } while(0)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CORTEX_Exported_Functions CORTEX Exported Functions
+ * @{
+ */
+
+/** @addtogroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup);
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority);
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SystemReset(void);
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb);
+/**
+ * @}
+ */
+
+/** @addtogroup CORTEX_Exported_Functions_Group2 Peripheral Control functions
+ * @brief Cortex control functions
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+uint32_t HAL_NVIC_GetPriorityGrouping(void);
+void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority);
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn);
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn);
+uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn);
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource);
+void HAL_SYSTICK_IRQHandler(void);
+void HAL_SYSTICK_Callback(void);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_CORTEX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_crc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,347 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_crc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of CRC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_CRC_H
+#define __STM32F3xx_HAL_CRC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CRC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup CRC_Exported_Types CRC Exported Types
+ * @{
+ */
+
+/**
+ * @brief CRC HAL State Structure definition
+ */
+typedef enum
+{
+ HAL_CRC_STATE_RESET = 0x00, /*!< CRC not yet initialized or disabled */
+ HAL_CRC_STATE_READY = 0x01, /*!< CRC initialized and ready for use */
+ HAL_CRC_STATE_BUSY = 0x02, /*!< CRC internal process is ongoing */
+ HAL_CRC_STATE_TIMEOUT = 0x03, /*!< CRC timeout state */
+ HAL_CRC_STATE_ERROR = 0x04 /*!< CRC error state */
+}HAL_CRC_StateTypeDef;
+
+
+/**
+ * @brief CRC Init Structure definition
+ */
+typedef struct
+{
+ uint8_t DefaultPolynomialUse; /*!< This parameter is a value of @ref CRC_Default_Polynomial and indicates if default polynomial is used.
+ If set to DEFAULT_POLYNOMIAL_ENABLE, resort to default
+ X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2+ X +1.
+ In that case, there is no need to set GeneratingPolynomial field.
+ If otherwise set to DEFAULT_POLYNOMIAL_DISABLE, GeneratingPolynomial and CRCLength fields must be set */
+
+ uint8_t DefaultInitValueUse; /*!< This parameter is a value of @ref CRC_Default_InitValue_Use and indicates if default init value is used.
+ If set to DEFAULT_INIT_VALUE_ENABLE, resort to default
+ 0xFFFFFFFF value. In that case, there is no need to set InitValue field.
+ If otherwise set to DEFAULT_INIT_VALUE_DISABLE, InitValue field must be set */
+
+ uint32_t GeneratingPolynomial; /*!< Set CRC generating polynomial. 7, 8, 16 or 32-bit long value for a polynomial degree
+ respectively equal to 7, 8, 16 or 32. This field is written in normal representation,
+ e.g., for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65.
+ No need to specify it if DefaultPolynomialUse is set to DEFAULT_POLYNOMIAL_ENABLE */
+
+ uint32_t CRCLength; /*!< This parameter is a value of @ref CRC_Polynomial_Size_Definitions and indicates CRC length.
+ Value can be either one of
+ CRC_POLYLENGTH_32B (32-bit CRC)
+ CRC_POLYLENGTH_16B (16-bit CRC)
+ CRC_POLYLENGTH_8B (8-bit CRC)
+ CRC_POLYLENGTH_7B (7-bit CRC) */
+
+ uint32_t InitValue; /*!< Init value to initiate CRC computation. No need to specify it if DefaultInitValueUse
+ is set to DEFAULT_INIT_VALUE_ENABLE */
+
+ uint32_t InputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Input_Data_Inversion and specifies input data inversion mode.
+ Can be either one of the following values
+ CRC_INPUTDATA_INVERSION_NONE no input data inversion
+ CRC_INPUTDATA_INVERSION_BYTE byte-wise inversion, 0x1A2B3C4D becomes 0x58D43CB2
+ CRC_INPUTDATA_INVERSION_HALFWORD halfword-wise inversion, 0x1A2B3C4D becomes 0xD458B23C
+ CRC_INPUTDATA_INVERSION_WORD word-wise inversion, 0x1A2B3C4D becomes 0xB23CD458 */
+
+ uint32_t OutputDataInversionMode; /*!< This parameter is a value of @ref CRCEx_Output_Data_Inversion and specifies output data (i.e. CRC) inversion mode.
+ Can be either
+ CRC_OUTPUTDATA_INVERSION_DISABLED no CRC inversion, or
+ CRC_OUTPUTDATA_INVERSION_ENABLED CRC 0x11223344 is converted into 0x22CC4488 */
+}CRC_InitTypeDef;
+
+
+/**
+ * @brief CRC Handle Structure definition
+ */
+typedef struct
+{
+ CRC_TypeDef *Instance; /*!< Register base address */
+
+ CRC_InitTypeDef Init; /*!< CRC configuration parameters */
+
+ HAL_LockTypeDef Lock; /*!< CRC Locking object */
+
+ __IO HAL_CRC_StateTypeDef State; /*!< CRC communication state */
+
+ uint32_t InputDataFormat; /*!< This parameter is a value of @ref CRC_Input_Buffer_Format and specifies input data format.
+ Can be either
+ CRC_INPUTDATA_FORMAT_BYTES input data is a stream of bytes (8-bit data)
+ CRC_INPUTDATA_FORMAT_HALFWORDS input data is a stream of half-words (16-bit data)
+ CRC_INPUTDATA_FORMAT_WORDS input data is a stream of words (32-bits data)
+ Note that constant CRC_INPUT_FORMAT_UNDEFINED is defined but an initialization error
+ must occur if InputBufferFormat is not one of the three values listed above */
+}CRC_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CRC_Exported_Constants CRC Exported Constants
+ * @{
+ */
+
+/** @defgroup CRC_Default_Polynomial_Value Default CRC generating polynomial
+ * @{
+ */
+#define DEFAULT_CRC32_POLY 0x04C11DB7
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Default_InitValue Default CRC computation initialization value
+ * @{
+ */
+#define DEFAULT_CRC_INITVALUE 0xFFFFFFFF
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Default_Polynomial Indicates whether or not default polynomial is used
+ * @{
+ */
+#define DEFAULT_POLYNOMIAL_ENABLE ((uint8_t)0x00)
+#define DEFAULT_POLYNOMIAL_DISABLE ((uint8_t)0x01)
+
+#define IS_DEFAULT_POLYNOMIAL(DEFAULT) (((DEFAULT) == DEFAULT_POLYNOMIAL_ENABLE) || \
+ ((DEFAULT) == DEFAULT_POLYNOMIAL_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Default_InitValue_Use Indicates whether or not default init value is used
+ * @{
+ */
+#define DEFAULT_INIT_VALUE_ENABLE ((uint8_t)0x00)
+#define DEFAULT_INIT_VALUE_DISABLE ((uint8_t)0x01)
+
+#define IS_DEFAULT_INIT_VALUE(VALUE) (((VALUE) == DEFAULT_INIT_VALUE_ENABLE) || \
+ ((VALUE) == DEFAULT_INIT_VALUE_DISABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Polynomial_Sizes Polynomial sizes to configure the IP
+ * @{
+ */
+#define CRC_POLYLENGTH_32B ((uint32_t)0x00000000)
+#define CRC_POLYLENGTH_16B ((uint32_t)CRC_CR_POLYSIZE_0)
+#define CRC_POLYLENGTH_8B ((uint32_t)CRC_CR_POLYSIZE_1)
+#define CRC_POLYLENGTH_7B ((uint32_t)CRC_CR_POLYSIZE)
+#define IS_CRC_POL_LENGTH(LENGTH) (((LENGTH) == CRC_POLYLENGTH_32B) || \
+ ((LENGTH) == CRC_POLYLENGTH_16B) || \
+ ((LENGTH) == CRC_POLYLENGTH_8B) || \
+ ((LENGTH) == CRC_POLYLENGTH_7B))
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Polynomial_Size_Definitions CRC polynomial possible sizes actual definitions
+ * @{
+ */
+#define HAL_CRC_LENGTH_32B 32
+#define HAL_CRC_LENGTH_16B 16
+#define HAL_CRC_LENGTH_8B 8
+#define HAL_CRC_LENGTH_7B 7
+
+/**
+ * @}
+ */
+
+/** @defgroup CRC_Input_Buffer_Format Input Buffer Format
+ * @{
+ */
+/* WARNING: CRC_INPUT_FORMAT_UNDEFINED is created for reference purposes but
+ * an error is triggered in HAL_CRC_Init() if InputDataFormat field is set
+ * to CRC_INPUT_FORMAT_UNDEFINED: the format MUST be defined by the user for
+ * the CRC APIs to provide a correct result */
+#define CRC_INPUTDATA_FORMAT_UNDEFINED ((uint32_t)0x00000000)
+#define CRC_INPUTDATA_FORMAT_BYTES ((uint32_t)0x00000001)
+#define CRC_INPUTDATA_FORMAT_HALFWORDS ((uint32_t)0x00000002)
+#define CRC_INPUTDATA_FORMAT_WORDS ((uint32_t)0x00000003)
+
+#define IS_CRC_INPUTDATA_FORMAT(FORMAT) (((FORMAT) == CRC_INPUTDATA_FORMAT_BYTES) || \
+ ((FORMAT) == CRC_INPUTDATA_FORMAT_HALFWORDS) || \
+ ((FORMAT) == CRC_INPUTDATA_FORMAT_WORDS))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup CRC_Exported_Macros CRC Exported Macros
+ * @{
+ */
+
+/** @brief Reset CRC handle state
+ * @param __HANDLE__: CRC handle.
+ * @retval None
+ */
+#define __HAL_CRC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRC_STATE_RESET)
+
+/**
+ * @brief Reset CRC Data Register.
+ * @param __HANDLE__: CRC handle
+ * @retval None.
+ */
+#define __HAL_CRC_DR_RESET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_RESET)
+
+/**
+ * @brief Set CRC INIT non-default value
+ * @param __HANDLE__ : CRC handle
+ * @param __INIT__ : 32-bit initial value
+ * @retval None.
+ */
+#define __HAL_CRC_INITIALCRCVALUE_CONFIG(__HANDLE__, __INIT__) ((__HANDLE__)->Instance->INIT = (__INIT__))
+
+/**
+ * @}
+ */
+
+
+/* Include CRC HAL Extended module */
+#include "stm32f3xx_hal_crc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CRC_Exported_Functions CRC Exported Functions
+ * @{
+ */
+
+/** @addtogroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions.
+ * @{
+ */
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc);
+HAL_StatusTypeDef HAL_CRC_DeInit (CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc);
+void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc);
+/**
+ * @}
+ */
+
+/** @addtogroup CRC_Exported_Functions_Group2 Peripheral Control functions
+ * @brief management functions.
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
+uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
+/**
+ * @}
+ */
+
+/** @addtogroup CRC_Exported_Functions_Group3 Peripheral State functions
+ * @brief Peripheral State functions.
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+ /** @defgroup HAL_CRC_Alias_Exported_Functions CRC aliases for Exported Functions
+ * @{
+ */
+/* Aliases for inter STM32 series compatibility */
+#define HAL_CRC_Input_Data_Reverse HAL_CRCEx_Input_Data_Reverse
+#define HAL_CRC_Output_Data_Reverse HAL_CRCEx_Output_Data_Reverse
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_CRC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_crc_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,165 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_crc_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of CRC HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_CRC_EX_H
+#define __STM32F3xx_HAL_CRC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup CRCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup CRCEx_Exported_Constants CRC Extended Exported Constants
+ * @{
+ */
+
+/** @defgroup CRCEx_Input_Data_Inversion CRC Extended Input Data Inversion Modes
+ * @{
+ */
+#define CRC_INPUTDATA_INVERSION_NONE ((uint32_t)0x00000000)
+#define CRC_INPUTDATA_INVERSION_BYTE ((uint32_t)CRC_CR_REV_IN_0)
+#define CRC_INPUTDATA_INVERSION_HALFWORD ((uint32_t)CRC_CR_REV_IN_1)
+#define CRC_INPUTDATA_INVERSION_WORD ((uint32_t)CRC_CR_REV_IN)
+
+#define IS_CRC_INPUTDATA_INVERSION_MODE(MODE) (((MODE) == CRC_INPUTDATA_INVERSION_NONE) || \
+ ((MODE) == CRC_INPUTDATA_INVERSION_BYTE) || \
+ ((MODE) == CRC_INPUTDATA_INVERSION_HALFWORD) || \
+ ((MODE) == CRC_INPUTDATA_INVERSION_WORD))
+/**
+ * @}
+ */
+
+/** @defgroup CRCEx_Output_Data_Inversion CRC Extended Output Data Inversion Modes
+ * @{
+ */
+#define CRC_OUTPUTDATA_INVERSION_DISABLED ((uint32_t)0x00000000)
+#define CRC_OUTPUTDATA_INVERSION_ENABLED ((uint32_t)CRC_CR_REV_OUT)
+
+#define IS_CRC_OUTPUTDATA_INVERSION_MODE(MODE) (((MODE) == CRC_OUTPUTDATA_INVERSION_DISABLED) || \
+ ((MODE) == CRC_OUTPUTDATA_INVERSION_ENABLED))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup CRCEx_Exported_Macros CRC Extended Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Set CRC output reversal
+ * @param __HANDLE__ : CRC handle
+ * @retval None.
+ */
+#define __HAL_CRC_OUTPUTREVERSAL_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_REV_OUT)
+
+/**
+ * @brief Unset CRC output reversal
+ * @param __HANDLE__ : CRC handle
+ * @retval None.
+ */
+#define __HAL_CRC_OUTPUTREVERSAL_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(CRC_CR_REV_OUT))
+
+/**
+ * @brief Set CRC non-default polynomial
+ * @param __HANDLE__ : CRC handle
+ * @param __POLYNOMIAL__: 7, 8, 16 or 32-bit polynomial
+ * @retval None.
+ */
+#define __HAL_CRC_POLYNOMIAL_CONFIG(__HANDLE__, __POLYNOMIAL__) ((__HANDLE__)->Instance->POL = (__POLYNOMIAL__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup CRCEx_Exported_Functions CRC Extended Exported Functions
+ * @{
+ */
+
+/** @addtogroup CRCEx_Exported_Functions_Group1 Extended Initialization and de-initialization functions
+ * @brief Extended Initialization and Configuration functions.
+ * @{
+ */
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_CRCEx_Polynomial_Set(CRC_HandleTypeDef *hcrc, uint32_t Pol, uint32_t PolyLength);
+HAL_StatusTypeDef HAL_CRCEx_Input_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t InputReverseMode);
+HAL_StatusTypeDef HAL_CRCEx_Output_Data_Reverse(CRC_HandleTypeDef *hcrc, uint32_t OutputReverseMode);
+/**
+ * @}
+ */
+
+/* Peripheral Control functions ***********************************************/
+/* Peripheral State and Error functions ***************************************/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_CRC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_dac.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,397 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_dac.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of DAC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_DAC_H
+#define __STM32F3xx_HAL_DAC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DAC DAC HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DAC_Exported_Types DAC Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_DAC_STATE_RESET = 0x00, /*!< DAC not yet initialized or disabled */
+ HAL_DAC_STATE_READY = 0x01, /*!< DAC initialized and ready for use */
+ HAL_DAC_STATE_BUSY = 0x02, /*!< DAC internal processing is ongoing */
+ HAL_DAC_STATE_TIMEOUT = 0x03, /*!< DAC timeout state */
+ HAL_DAC_STATE_ERROR = 0x04 /*!< DAC error state */
+
+}HAL_DAC_StateTypeDef;
+
+
+/**
+ * @brief DAC Configuration regular Channel structure definition
+ */
+typedef struct
+{
+ uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel.
+ This parameter can be a value of @ref DACEx_trigger_selection */
+
+ uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled.
+ This parameter can be a value of @ref DAC_output_buffer */
+
+}DAC_ChannelConfTypeDef;
+
+/**
+ * @brief DAC handle Structure definition
+ */
+typedef struct __DAC_HandleTypeDef
+{
+ DAC_TypeDef *Instance; /*!< Register base address */
+
+ __IO HAL_DAC_StateTypeDef State; /*!< DAC communication state */
+
+ HAL_LockTypeDef Lock; /*!< DAC locking object */
+
+ DMA_HandleTypeDef *DMA_Handle1; /*!< Pointer DMA handler for channel 1 */
+
+ DMA_HandleTypeDef *DMA_Handle2; /*!< Pointer DMA handler for channel 2 */
+
+ __IO uint32_t ErrorCode; /*!< DAC Error code */
+
+}DAC_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DAC_Exported_Constants DAC Exported Contants
+ * @{
+ */
+
+/** @defgroup DAC_Error_Code DAC Error Code
+ * @{
+ */
+#define HAL_DAC_ERROR_NONE 0x00 /*!< No error */
+#define HAL_DAC_ERROR_DMAUNDERRUNCH1 0x01 /*!< DAC channel1 DMA underrun error */
+#define HAL_DAC_ERROR_DMAUNDERRUNCH2 0x02 /*!< DAC channel2 DMA underrun error */
+#define HAL_DAC_ERROR_DMA 0x04 /*!< DMA error */
+/**
+ * @}
+ */
+
+/** @defgroup DAC_wave_generation DAC wave generation
+ * @{
+ */
+#define DAC_WAVEGENERATION_NONE ((uint32_t)0x00000000)
+#define DAC_WAVEGENERATION_NOISE ((uint32_t)DAC_CR_WAVE1_0)
+#define DAC_WAVEGENERATION_TRIANGLE ((uint32_t)DAC_CR_WAVE1_1)
+
+#define IS_DAC_GENERATE_WAVE(WAVE) (((WAVE) == DAC_WAVEGENERATION_NONE) || \
+ ((WAVE) == DAC_WAVEGENERATION_NOISE) || \
+ ((WAVE) == DAC_WAVEGENERATION_TRIANGLE))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_lfsrunmask_triangleamplitude DAC lfsrunmask triangleamplitude
+ * @{
+ */
+#define DAC_LFSRUNMASK_BIT0 ((uint32_t)0x00000000) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */
+#define DAC_LFSRUNMASK_BITS1_0 ((uint32_t)DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS2_0 ((uint32_t)DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS3_0 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0)/*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS4_0 ((uint32_t)DAC_CR_MAMP1_2) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS5_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS6_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS7_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS8_0 ((uint32_t)DAC_CR_MAMP1_3) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS9_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS10_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */
+#define DAC_LFSRUNMASK_BITS11_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */
+#define DAC_TRIANGLEAMPLITUDE_1 ((uint32_t)0x00000000) /*!< Select max triangle amplitude of 1 */
+#define DAC_TRIANGLEAMPLITUDE_3 ((uint32_t)DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 3 */
+#define DAC_TRIANGLEAMPLITUDE_7 ((uint32_t)DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 7 */
+#define DAC_TRIANGLEAMPLITUDE_15 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 15 */
+#define DAC_TRIANGLEAMPLITUDE_31 ((uint32_t)DAC_CR_MAMP1_2) /*!< Select max triangle amplitude of 31 */
+#define DAC_TRIANGLEAMPLITUDE_63 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 63 */
+#define DAC_TRIANGLEAMPLITUDE_127 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 127 */
+#define DAC_TRIANGLEAMPLITUDE_255 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 255 */
+#define DAC_TRIANGLEAMPLITUDE_511 ((uint32_t)DAC_CR_MAMP1_3) /*!< Select max triangle amplitude of 511 */
+#define DAC_TRIANGLEAMPLITUDE_1023 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 1023 */
+#define DAC_TRIANGLEAMPLITUDE_2047 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 2047 */
+#define DAC_TRIANGLEAMPLITUDE_4095 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 4095 */
+
+#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUNMASK_BIT0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS1_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS2_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS3_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS4_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS5_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS6_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS7_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS8_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS9_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS10_0) || \
+ ((VALUE) == DAC_LFSRUNMASK_BITS11_0) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_1) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_3) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_7) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_15) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_31) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_63) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_127) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_255) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_511) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_1023) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_2047) || \
+ ((VALUE) == DAC_TRIANGLEAMPLITUDE_4095))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_output_buffer DAC output buffer
+ * @{
+ */
+#define DAC_OUTPUTBUFFER_ENABLE ((uint32_t)0x00000000)
+#define DAC_OUTPUTBUFFER_DISABLE ((uint32_t)DAC_CR_BOFF1)
+
+#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OUTPUTBUFFER_ENABLE) || \
+ ((STATE) == DAC_OUTPUTBUFFER_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_data_alignement DAC data alignement
+ * @{
+ */
+#define DAC_ALIGN_12B_R ((uint32_t)0x00000000)
+#define DAC_ALIGN_12B_L ((uint32_t)0x00000004)
+#define DAC_ALIGN_8B_R ((uint32_t)0x00000008)
+
+#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_ALIGN_12B_R) || \
+ ((ALIGN) == DAC_ALIGN_12B_L) || \
+ ((ALIGN) == DAC_ALIGN_8B_R))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_wave_generation DAC wave generation
+ * @{
+ */
+#define DAC_WAVE_NOISE ((uint32_t)DAC_CR_WAVE1_0)
+#define DAC_WAVE_TRIANGLE ((uint32_t)DAC_CR_WAVE1_1)
+
+#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NOISE) || \
+ ((WAVE) == DAC_WAVE_TRIANGLE))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_data DAC data
+ * @{
+ */
+#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0)
+/**
+ * @}
+ */
+
+/** @defgroup DAC_flags_definition DAC flags definition
+ * @{
+ */
+#define DAC_FLAG_DMAUDR1 ((uint32_t)DAC_SR_DMAUDR1)
+#define DAC_FLAG_DMAUDR2 ((uint32_t)DAC_SR_DMAUDR2)
+
+#define IS_DAC_FLAG(FLAG) (((FLAG) == DAC_FLAG_DMAUDR1) || \
+ ((FLAG) == DAC_FLAG_DMAUDR2))
+/**
+ * @}
+ */
+
+/** @defgroup DAC_interrupts_definition DAC interrupts definition
+ * @{
+ */
+#define DAC_IT_DMAUDR1 ((uint32_t)DAC_CR_DMAUDRIE1)
+#define DAC_IT_DMAUDR2 ((uint32_t)DAC_CR_DMAUDRIE2)
+
+
+#define IS_DAC_IT(IT) (((IT) == DAC_IT_DMAUDR1) || \
+ ((IT) == DAC_IT_DMAUDR2))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup DAC_Exported_Macros DAC Exported Macros
+ * @{
+ */
+
+/** @brief Reset DAC handle state
+ * @param __HANDLE__: DAC handle.
+ * @retval None
+ */
+#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DAC_STATE_RESET)
+
+/* Enable the DAC peripheral */
+#define __HAL_DAC_ENABLE(__HANDLE__, __DAC_Channel__) \
+((__HANDLE__)->Instance->CR |= (DAC_CR_EN1 << (__DAC_Channel__)))
+
+/* Disable the DAC peripheral */
+#define __HAL_DAC_DISABLE(__HANDLE__, __DAC_Channel__) \
+((__HANDLE__)->Instance->CR &= ~(DAC_CR_EN1 << (__DAC_Channel__)))
+
+/* Set DHR12R1 alignment */
+#define __HAL_DHR12R1_ALIGNEMENT(__ALIGNEMENT__) (((uint32_t)0x00000008) + (__ALIGNEMENT__))
+
+/* Set DHR12R2 alignment */
+#define __HAL_DHR12R2_ALIGNEMENT(__ALIGNEMENT__) (((uint32_t)0x00000014) + (__ALIGNEMENT__))
+
+/* Set DHR12RD alignment */
+#define __HAL_DHR12RD_ALIGNEMENT(__ALIGNEMENT__) (((uint32_t)0x00000020) + (__ALIGNEMENT__))
+
+/* Enable the DAC interrupt */
+#define __HAL_DAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__))
+
+/* Disable the DAC interrupt */
+#define __HAL_DAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__))
+
+/* Get the selected DAC's flag status */
+#define __HAL_DAC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/* Clear the DAC's flag */
+#define __HAL_DAC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = (__FLAG__))
+
+/**
+ * @}
+ */
+
+/* Include DAC HAL Extended module */
+#include "stm32f3xx_hal_dac_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DAC_Exported_Functions DAC Exported Functions
+ * @{
+ */
+
+/** @addtogroup DAC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef* hdac);
+HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef* hdac);
+void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac);
+void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac);
+
+/**
+ * @}
+ */
+
+/** @addtogroup DAC_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t channel);
+HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef* hdac, uint32_t channel);
+HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef* hdac, uint32_t channel, uint32_t* pData, uint32_t Length, uint32_t alignment);
+HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef* hdac, uint32_t channel);
+uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t channel);
+void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac);
+void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef* hdac);
+void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef* hdac);
+void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac);
+void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac);
+
+/**
+ * @}
+ */
+
+/** @addtogroup DAC_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t channel);
+HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef* hdac, uint32_t channel, uint32_t alignment, uint32_t data);
+
+/**
+ * @}
+ */
+
+/** @addtogroup DAC_Exported_Functions_Group4 Peripheral State and Error functions
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef* hdac);
+uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F3xx_HAL_DAC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_dac_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,320 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_dac_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of DAC HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_DAC_EX_H
+#define __STM32F3xx_HAL_DAC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DACEx DAC Extended HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DACEx_Exported_Constants DAC Extended Exported Constants
+ * @{
+ */
+
+/** @defgroup DACEx_trigger_selection DAC Extended trigger selection
+ * @{
+ */
+
+#if defined(STM32F301x8) || defined(STM32F318xx)
+#define DAC_TRIGGER_NONE ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
+ has been loaded, and not by external trigger */
+#define DAC_TRIGGER_T6_TRGO ((uint32_t)DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T15_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
+ ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T15_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+ ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+#endif /* STM32F301x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || \
+ defined(STM32F302xC) || \
+ defined(STM32F302x8)
+
+#define DAC_TRIGGER_NONE ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
+ has been loaded, and not by external trigger */
+#define DAC_TRIGGER_T6_TRGO ((uint32_t)DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T3_TRGO ((uint32_t)(DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T15_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T4_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
+ ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T3_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T4_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T15_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+ ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+
+#endif /* STM32F302xE || */
+ /* STM32F302xC || */
+ /* STM32F302x8 */
+
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx)
+
+#define DAC_TRIGGER_NONE ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
+ has been loaded, and not by external trigger */
+#define DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T4_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T15_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T6_TRGO ((uint32_t)DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T7_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T3_TRGO ((uint32_t)(DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel
+ Use __HAL_REMAPTRIGGER_ENABLE(HAL_REMAPTRIGGER_DAC1_TRIG) for TIM3 selection */
+#define DAC_TRIGGER_T8_TRGO DAC_TRIGGER_T3_TRGO /*!< TIM8 TRGO selected as external conversion trigger for DAC channel
+ Use __HAL_REMAPTRIGGER_DISABLE(HAL_REMAPTRIGGER_DAC1_TRIG) for TIM8 selection */
+
+#define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
+ ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T3_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T4_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T15_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+ ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+
+#if defined(STM32F303x8) || defined(STM32F328xx)
+
+#define DAC_TRIGGER_NONE ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
+ has been loaded, and not by external trigger */
+#define DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T15_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T6_TRGO ((uint32_t)DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T7_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T3_TRGO ((uint32_t)(DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel */
+
+#define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
+ ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T3_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T15_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+ ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+
+#endif /* STM32F303x8 || STM32F328xx */
+
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+
+#define DAC_TRIGGER_NONE ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
+ has been loaded, and not by external trigger */
+
+#define DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T4_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T5_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel (DAC1) */
+#define DAC_TRIGGER_T18_TRGO DAC_TRIGGER_T5_TRGO /*!< TIM18 TRGO selected as external conversion trigger for DAC channel (DAC2) */
+#define DAC_TRIGGER_T6_TRGO ((uint32_t)DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T7_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T3_TRGO ((uint32_t)(DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel */
+
+#define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */
+
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
+ ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T3_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T4_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T5_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+ ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F334x8)
+
+#define DAC_TRIGGER_NONE ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register
+ has been loaded, and not by external trigger */
+#define DAC_TRIGGER_T6_TRGO ((uint32_t)DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T3_TRGO ((uint32_t)(DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM3 TRGO selected as external conversion trigger for DAC channel
+ Use __HAL_REMAPTRIGGER_ENABLE(HAL_REMAPTRIGGER_DAC1_TRIG) for TIM3 remap */
+
+#define DAC_TRIGGER_T7_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_T15_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM15 TRGO selected as external conversion trigger for DAC channel
+ Use __HAL_REMAPTRIGGER_DISABLE(HAL_REMAPTRIGGER_DAC1_TRIG3) for TIM15 selection */
+#define DAC_TRIGGER_HRTIM1_DACTRG1 DAC_TRIGGER_T15_TRGO /*!< HRTIM1 DACTRG1 selected as external conversion trigger for DAC
+ Use __HAL_REMAPTRIGGER_ENABLE(HAL_REMAPTRIGGER_DAC1_TRIG3) for HRTIM1 DACTRG1 selection */
+
+#define DAC_TRIGGER_HRTIM1_DACTRG2 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< HRTIM1 DACTRG2 selected as external conversion trigger for DAC channel (DAC1)
+ Use __HAL_REMAPTRIGGER_ENABLE(HAL_REMAPTRIGGER_DAC1_TRIG5) for HRTIM1 DACTRG2 remap */
+#define DAC_TRIGGER_HRTIM1_DACTRG3 DAC_TRIGGER_HRTIM1_DACTRG2 /*!< HRTIM1 DACTRG3 selected as external conversion trigger for DAC channel (DAC2)*/
+
+#define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */
+#define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */
+
+#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \
+ ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T3_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T15_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \
+ ((TRIGGER) == DAC_TRIGGER_HRTIM1_DACTRG2) || \
+ ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \
+ ((TRIGGER) == DAC_TRIGGER_SOFTWARE))
+
+#endif /* STM32F334x8 */
+
+/**
+ * @}
+ */
+
+/** @defgroup DACEx_Channel_selection DAC Extended Channel selection
+ * @{
+ */
+
+#if defined(STM32F302xE) || \
+ defined(STM32F302xC) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define DAC_CHANNEL_1 ((uint32_t)0x00000000) /*!< DAC Channel 1 */
+/* Aliases for compatibility */
+#define DAC1_CHANNEL_1 DAC_CHANNEL_1 /*!< DAC1 Channel 1 */
+
+#define IS_DAC_CHANNEL(CHANNEL) ((CHANNEL) == DAC_CHANNEL_1)
+#endif /* STM32F302xE || */
+ /* STM32F302xC || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx)
+#define DAC_CHANNEL_1 ((uint32_t)0x00000000) /*!< DAC Channel 1 */
+#define DAC_CHANNEL_2 ((uint32_t)0x00000010) /*!< DAC Channel 2 */
+/* Aliases for compatibility */
+#define DAC1_CHANNEL_1 DAC_CHANNEL_1 /*!< DAC1 Channel 1 */
+#define DAC1_CHANNEL_2 DAC_CHANNEL_2 /*!< DAC1 Channel 2 */
+
+#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1) || \
+ ((CHANNEL) == DAC_CHANNEL_2))
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+
+#define DAC_CHANNEL_1 ((uint32_t)0x00000000) /*!< DAC Channel 1 */
+#define DAC_CHANNEL_2 ((uint32_t)0x00000010) /*!< DAC Channel 2 */
+
+/* Aliases for compatibility */
+#define DAC1_CHANNEL_1 DAC_CHANNEL_1 /*!< DAC1 Channel 1 */
+#define DAC1_CHANNEL_2 DAC_CHANNEL_2 /*!< DAC1 Channel 2 */
+#define DAC2_CHANNEL_1 DAC_CHANNEL_1 /*!< DAC2 Channel 1 */
+
+#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1) || \
+ ((CHANNEL) == DAC_CHANNEL_2))
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F373xC || STM32F378xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @addtogroup DACEx_Exported_Functions DAC Extended Exported Functions
+ * @{
+ */
+/* Extended features functions ***********************************************/
+uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac);
+HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t alignment, uint32_t data1, uint32_t data2);
+HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t channel, uint32_t Amplitude);
+HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t channel, uint32_t Amplitude);
+
+void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac);
+void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef *hdac);
+void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_HAL_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_def.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,163 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_def.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief This file contains HAL common defines, enumeration, macros and
+ * structures definitions.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_DEF
+#define __STM32F3xx_HAL_DEF
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx.h"
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief HAL Status structures definition
+ */
+typedef enum
+{
+ HAL_OK = 0x00,
+ HAL_ERROR = 0x01,
+ HAL_BUSY = 0x02,
+ HAL_TIMEOUT = 0x03
+} HAL_StatusTypeDef;
+
+/**
+ * @brief HAL Lock structures definition
+ */
+typedef enum
+{
+ HAL_UNLOCKED = 0x00,
+ HAL_LOCKED = 0x01
+} HAL_LockTypeDef;
+
+/* Exported macro ------------------------------------------------------------*/
+#ifndef HAL_NULL
+ #define HAL_NULL (void *) 0
+#endif
+
+#define HAL_MAX_DELAY 0xFFFFFFFF
+
+#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) != RESET)
+#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == RESET)
+
+#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD_, __DMA_HANDLE_) \
+ do{ \
+ (__HANDLE__)->__PPP_DMA_FIELD_ = &(__DMA_HANDLE_); \
+ (__DMA_HANDLE_).Parent = (__HANDLE__); \
+ } while(0)
+
+/** @brief Reset the Handle's State field.
+ * @param __HANDLE__: specifies the Peripheral Handle.
+ * @note This macro can be used for the following purpose:
+ * - When the Handle is declared as local variable; before passing it as parameter
+ * to HAL_PPP_Init() for the first time, it is mandatory to use this macro
+ * to set to 0 the Handle's "State" field.
+ * Otherwise, "State" field may have any random value and the first time the function
+ * HAL_PPP_Init() is called, the low level hardware initialization will be missed
+ * (i.e. HAL_PPP_MspInit() will not be executed).
+ * - When there is a need to reconfigure the low level hardware: instead of calling
+ * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init().
+ * In this later function, when the Handle's "State" field is set to 0, it will execute the function
+ * HAL_PPP_MspInit() which will reconfigure the low level hardware.
+ * @retval None
+ */
+#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0)
+
+#if (USE_RTOS == 1)
+ #error " USE_RTOS should be 0 in the current HAL release "
+#else
+ #define __HAL_LOCK(__HANDLE__) \
+ do{ \
+ if((__HANDLE__)->Lock == HAL_LOCKED) \
+ { \
+ return HAL_BUSY; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Lock = HAL_LOCKED; \
+ } \
+ }while (0)
+
+ #define __HAL_UNLOCK(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Lock = HAL_UNLOCKED; \
+ }while (0)
+#endif /* USE_RTOS */
+
+#if defined ( __GNUC__ )
+ #ifndef __weak
+ #define __weak __attribute__((weak))
+ #endif /* __weak */
+ #ifndef __packed
+ #define __packed __attribute__((__packed__))
+ #endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */
+#if defined (__GNUC__) /* GNU Compiler */
+ #ifndef __ALIGN_END
+ #define __ALIGN_END __attribute__ ((aligned (4)))
+ #endif /* __ALIGN_END */
+ #ifndef __ALIGN_BEGIN
+ #define __ALIGN_BEGIN
+ #endif /* __ALIGN_BEGIN */
+#else
+ #ifndef __ALIGN_END
+ #define __ALIGN_END
+ #endif /* __ALIGN_END */
+ #ifndef __ALIGN_BEGIN
+ #if defined (__CC_ARM) /* ARM Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #elif defined (__ICCARM__) /* IAR Compiler */
+ #define __ALIGN_BEGIN
+ #endif /* __CC_ARM */
+ #endif /* __ALIGN_BEGIN */
+#endif /* __GNUC__ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ___STM32F3xx_HAL_DEF */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_dma.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,460 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_dma.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of DMA HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_DMA_H
+#define __STM32F3xx_HAL_DMA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMA DMA HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DMA_Exported_Types DMA Exported Types
+ * @{
+ */
+
+/**
+ * @brief DMA Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral,
+ from memory to memory or from peripheral to memory.
+ This parameter can be a value of @ref DMA_Data_transfer_direction */
+
+ uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Peripheral_incremented_mode */
+
+ uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not.
+ This parameter can be a value of @ref DMA_Memory_incremented_mode */
+
+ uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width.
+ This parameter can be a value of @ref DMA_Peripheral_data_size */
+
+ uint32_t MemDataAlignment; /*!< Specifies the Memory data width.
+ This parameter can be a value of @ref DMA_Memory_data_size */
+
+ uint32_t Mode; /*!< Specifies the operation mode of the DMAy Channelx.
+ This parameter can be a value of @ref DMA_mode
+ @note The circular buffer mode cannot be used if the memory-to-memory
+ data transfer is configured on the selected Channel */
+
+ uint32_t Priority; /*!< Specifies the software priority for the DMAy Channelx.
+ This parameter can be a value of @ref DMA_Priority_level */
+
+} DMA_InitTypeDef;
+
+/**
+ * @brief DMA Configuration enumeration values definition
+ */
+typedef enum
+{
+ DMA_MODE = 0, /*!< Control related DMA mode Parameter in DMA_InitTypeDef */
+ DMA_PRIORITY = 1, /*!< Control related priority level Parameter in DMA_InitTypeDef */
+
+} DMA_ControlTypeDef;
+
+/**
+ * @brief HAL DMA State structures definition
+ */
+typedef enum
+{
+ HAL_DMA_STATE_RESET = 0x00, /*!< DMA not yet initialized or disabled */
+ HAL_DMA_STATE_READY = 0x01, /*!< DMA process success and ready for use */
+ HAL_DMA_STATE_READY_HALF = 0x11, /*!< DMA Half process success */
+ HAL_DMA_STATE_BUSY = 0x02, /*!< DMA process is ongoing */
+ HAL_DMA_STATE_TIMEOUT = 0x03, /*!< DMA timeout state */
+ HAL_DMA_STATE_ERROR = 0x04, /*!< DMA error state */
+
+}HAL_DMA_StateTypeDef;
+
+/**
+ * @brief HAL DMA Error Code structure definition
+ */
+typedef enum
+{
+ HAL_DMA_FULL_TRANSFER = 0x00, /*!< Full transfer */
+ HAL_DMA_HALF_TRANSFER = 0x01, /*!< Half Transfer */
+
+}HAL_DMA_LevelCompleteTypeDef;
+
+
+/**
+ * @brief DMA handle Structure definition
+ */
+typedef struct __DMA_HandleTypeDef
+{
+ DMA_Channel_TypeDef *Instance; /*!< Register base address */
+
+ DMA_InitTypeDef Init; /*!< DMA communication parameters */
+
+ HAL_LockTypeDef Lock; /*!< DMA locking object */
+
+ HAL_DMA_StateTypeDef State; /*!< DMA transfer state */
+
+ void *Parent; /*!< Parent object state */
+
+ void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */
+
+ void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */
+
+ void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */
+
+ __IO uint32_t ErrorCode; /*!< DMA Error code */
+
+} DMA_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DMA_Exported_Constants DMA Exported Constants
+ * @{
+ */
+
+/** @defgroup DMA_Error_Code DMA Error Code
+ * @{
+ */
+#define HAL_DMA_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_DMA_ERROR_TE ((uint32_t)0x00000001) /*!< Transfer error */
+#define HAL_DMA_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */
+/**
+ * @}
+ */
+
+
+/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction
+ * @{
+ */
+#define DMA_PERIPH_TO_MEMORY ((uint32_t)0x00000000) /*!< Peripheral to memory direction */
+#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_CCR_DIR) /*!< Memory to peripheral direction */
+#define DMA_MEMORY_TO_MEMORY ((uint32_t)(DMA_CCR_MEM2MEM)) /*!< Memory to memory direction */
+
+#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \
+ ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \
+ ((DIRECTION) == DMA_MEMORY_TO_MEMORY))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Data_buffer_size DMA Data buffer size
+ * @{
+ */
+#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode
+ * @{
+ */
+#define DMA_PINC_ENABLE ((uint32_t)DMA_CCR_PINC) /*!< Peripheral increment mode Enable */
+#define DMA_PINC_DISABLE ((uint32_t)0x00000000) /*!< Peripheral increment mode Disable */
+
+#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \
+ ((STATE) == DMA_PINC_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode
+ * @{
+ */
+#define DMA_MINC_ENABLE ((uint32_t)DMA_CCR_MINC) /*!< Memory increment mode Enable */
+#define DMA_MINC_DISABLE ((uint32_t)0x00000000) /*!< Memory increment mode Disable */
+
+#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \
+ ((STATE) == DMA_MINC_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size
+ * @{
+ */
+#define DMA_PDATAALIGN_BYTE ((uint32_t)0x00000000) /*!< Peripheral data alignment : Byte */
+#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_PSIZE_0) /*!< Peripheral data alignment : HalfWord */
+#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_CCR_PSIZE_1) /*!< Peripheral data alignment : Word */
+
+#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_PDATAALIGN_WORD))
+/**
+ * @}
+ */
+
+
+/** @defgroup DMA_Memory_data_size DMA Memory data size
+ * @{
+ */
+#define DMA_MDATAALIGN_BYTE ((uint32_t)0x00000000) /*!< Memory data alignment : Byte */
+#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_CCR_MSIZE_0) /*!< Memory data alignment : HalfWord */
+#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_CCR_MSIZE_1) /*!< Memory data alignment : Word */
+
+#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \
+ ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \
+ ((SIZE) == DMA_MDATAALIGN_WORD ))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_mode DMA mode
+ * @{
+ */
+#define DMA_NORMAL ((uint32_t)0x00000000) /*!< Normal Mode */
+#define DMA_CIRCULAR ((uint32_t)DMA_CCR_CIRC) /*!< Circular Mode */
+
+#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \
+ ((MODE) == DMA_CIRCULAR))
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Priority_level DMA Priority level
+ * @{
+ */
+#define DMA_PRIORITY_LOW ((uint32_t)0x00000000) /*!< Priority level : Low */
+#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_CCR_PL_0) /*!< Priority level : Medium */
+#define DMA_PRIORITY_HIGH ((uint32_t)DMA_CCR_PL_1) /*!< Priority level : High */
+#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_CCR_PL) /*!< Priority level : Very_High */
+
+#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \
+ ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \
+ ((PRIORITY) == DMA_PRIORITY_HIGH) || \
+ ((PRIORITY) == DMA_PRIORITY_VERY_HIGH))
+/**
+ * @}
+ */
+
+
+/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions
+ * @{
+ */
+
+#define DMA_IT_TC ((uint32_t)DMA_CCR_TCIE)
+#define DMA_IT_HT ((uint32_t)DMA_CCR_HTIE)
+#define DMA_IT_TE ((uint32_t)DMA_CCR_TEIE)
+
+/**
+ * @}
+ */
+
+/** @defgroup DMA_flag_definitions DMA flag definitions
+ * @{
+ */
+
+#define DMA_FLAG_GL1 ((uint32_t)0x00000001)
+#define DMA_FLAG_TC1 ((uint32_t)0x00000002)
+#define DMA_FLAG_HT1 ((uint32_t)0x00000004)
+#define DMA_FLAG_TE1 ((uint32_t)0x00000008)
+#define DMA_FLAG_GL2 ((uint32_t)0x00000010)
+#define DMA_FLAG_TC2 ((uint32_t)0x00000020)
+#define DMA_FLAG_HT2 ((uint32_t)0x00000040)
+#define DMA_FLAG_TE2 ((uint32_t)0x00000080)
+#define DMA_FLAG_GL3 ((uint32_t)0x00000100)
+#define DMA_FLAG_TC3 ((uint32_t)0x00000200)
+#define DMA_FLAG_HT3 ((uint32_t)0x00000400)
+#define DMA_FLAG_TE3 ((uint32_t)0x00000800)
+#define DMA_FLAG_GL4 ((uint32_t)0x00001000)
+#define DMA_FLAG_TC4 ((uint32_t)0x00002000)
+#define DMA_FLAG_HT4 ((uint32_t)0x00004000)
+#define DMA_FLAG_TE4 ((uint32_t)0x00008000)
+#define DMA_FLAG_GL5 ((uint32_t)0x00010000)
+#define DMA_FLAG_TC5 ((uint32_t)0x00020000)
+#define DMA_FLAG_HT5 ((uint32_t)0x00040000)
+#define DMA_FLAG_TE5 ((uint32_t)0x00080000)
+#define DMA_FLAG_GL6 ((uint32_t)0x00100000)
+#define DMA_FLAG_TC6 ((uint32_t)0x00200000)
+#define DMA_FLAG_HT6 ((uint32_t)0x00400000)
+#define DMA_FLAG_TE6 ((uint32_t)0x00800000)
+#define DMA_FLAG_GL7 ((uint32_t)0x01000000)
+#define DMA_FLAG_TC7 ((uint32_t)0x02000000)
+#define DMA_FLAG_HT7 ((uint32_t)0x04000000)
+#define DMA_FLAG_TE7 ((uint32_t)0x08000000)
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup DMA_Exported_Macros DMA Exported Macros
+ * @{
+ */
+
+/** @brief Reset DMA handle state
+ * @param __HANDLE__: DMA handle.
+ * @retval None
+ */
+#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
+
+/**
+ * @brief Enable the specified DMA Channel.
+ * @param __HANDLE__: DMA handle
+ * @retval None.
+ */
+#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR |= DMA_CCR_EN)
+
+/**
+ * @brief Disable the specified DMA Channel.
+ * @param __HANDLE__: DMA handle
+ * @retval None.
+ */
+#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CCR &= ~DMA_CCR_EN)
+
+
+/* Interrupt & Flag management */
+
+/**
+ * @brief Enables the specified DMA Channel interrupts.
+ * @param __HANDLE__: DMA handle
+ * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask
+ * @arg DMA_IT_TE: Transfer error interrupt mask
+ * @retval None
+ */
+#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified DMA Channel interrupts.
+ * @param __HANDLE__: DMA handle
+ * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask
+ * @arg DMA_IT_TE: Transfer error interrupt mask
+ * @retval None
+ */
+#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CCR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Checks whether the specified DMA Channel interrupt has occurred or not.
+ * @param __HANDLE__: DMA handle
+ * @param __INTERRUPT__: specifies the DMA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DMA_IT_TC: Transfer complete interrupt mask
+ * @arg DMA_IT_HT: Half transfer complete interrupt mask
+ * @arg DMA_IT_TE: Transfer error interrupt mask
+ * @retval The state of DMA_IT (SET or RESET).
+ */
+#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CCR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+ * @}
+ */
+
+/* Include DMA HAL Extended module */
+#include "stm32f3xx_hal_dma_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DMA_Exported_Functions DMA Exported Functions
+ * @{
+ */
+
+/** @addtogroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_DeInit (DMA_HandleTypeDef *hdma);
+
+/**
+ * @}
+ */
+
+/** @addtogroup DMA_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
+HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma);
+HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout);
+void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma);
+
+/**
+ * @}
+ */
+
+/** @addtogroup DMA_Exported_Functions_Group3 Peripheral State functions
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma);
+uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_dma_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,259 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_dma_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of DMA HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_DMA_EX_H
+#define __STM32F3xx_HAL_DMA_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMAEx DMA Extended HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup DMAEx_Exported_Macros DMA Extended Exported Macros
+ * @{
+ */
+/* Interrupt & Flag management */
+
+/**
+ * @brief Returns the current DMA Channel transfer complete flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified transfer complete flag index.
+ */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup STM32F302xE_STM32F303xE_STM32F398xx_STM32F302xC_STM32F303xC_STM32F3058xx_STM32F373xC_STM32F378xx Product devices
+ * @{
+ */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TC7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TC4 :\
+ DMA_FLAG_TC5)
+
+/**
+ * @brief Returns the current DMA Channel half transfer complete flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified half transfer complete flag index.
+ */
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_HT7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_HT4 :\
+ DMA_FLAG_HT5)
+
+/**
+ * @brief Returns the current DMA Channel transfer error flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel7))? DMA_FLAG_TE7 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Channel4))? DMA_FLAG_TE4 :\
+ DMA_FLAG_TE5)
+
+/**
+ * @brief Get the DMA Channel pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 0, 1, 2, 3, 4, 5, 6 or 7 to select the DMA Channel flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->ISR & (__FLAG__)) :\
+ (DMA1->ISR & (__FLAG__)))
+
+/**
+ * @brief Clears the DMA Channel pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 0, 1, 2, 3, 4, 5, 6 or 7 to select the DMA Channel flag.
+ * @retval None
+ */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \
+(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Channel7)? (DMA2->IFCR = (__FLAG__)) :\
+ (DMA1->IFCR = (__FLAG__)))
+
+/**
+ * @}
+ */
+
+#else
+
+/** @defgroup STM32F301x8_STM32F302x8_STM32F318xx_STM32F303x8_STM32F334x8_STM32F328xx Product devices
+ * @{
+ */
+#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TC1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TC2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TC3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TC4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TC5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TC6 :\
+ DMA_FLAG_TC7)
+
+/**
+ * @brief Returns the current DMA Channel half transfer complete flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified half transfer complete flag index.
+ */
+#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_HT1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_HT2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_HT3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_HT4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_HT5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_HT6 :\
+ DMA_FLAG_HT7)
+
+/**
+ * @brief Returns the current DMA Channel transfer error flag.
+ * @param __HANDLE__: DMA handle
+ * @retval The specified transfer error flag index.
+ */
+#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\
+(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel1))? DMA_FLAG_TE1 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel2))? DMA_FLAG_TE2 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel3))? DMA_FLAG_TE3 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel4))? DMA_FLAG_TE4 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel5))? DMA_FLAG_TE5 :\
+ ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Channel6))? DMA_FLAG_TE6 :\
+ DMA_FLAG_TE7)
+
+/**
+ * @brief Get the DMA Channel pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 0, 1, 2, 3, 4, 5, 6 or 7 to select the DMA Channel flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+
+#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__) (DMA1->ISR & (__FLAG__))
+
+/**
+ * @brief Clears the DMA Channel pending flags.
+ * @param __HANDLE__: DMA handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA_FLAG_TCx: Transfer complete flag
+ * @arg DMA_FLAG_HTx: Half transfer complete flag
+ * @arg DMA_FLAG_TEx: Transfer error flag
+ * Where x can be 0, 1, 2, 3, 4, 5, 6 or 7 to select the DMA Channel flag.
+ * @retval None
+ */
+#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) (DMA1->IFCR |= (__FLAG__))
+
+/**
+ * @}
+ */
+
+#endif
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#endif /* __STM32F3xx_HAL_DMA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_flash.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,532 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_flash.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of Flash HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_FLASH_H
+#define __STM32F3xx_HAL_FLASH_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASH FLASH HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Types FLASH Exported Types
+ * @{
+ */
+
+/**
+ * @brief FLASH Error source
+ */
+typedef enum
+{
+ FLASH_ERROR_PG = 0x01,
+ FLASH_ERROR_WRP = 0x02
+} FLASH_ErrorTypeDef;
+
+/**
+ * @brief FLASH Erase structure definition
+ */
+typedef struct
+{
+ uint32_t TypeErase; /*!< TypeErase: Mass erase or page erase.
+ This parameter can be a value of @ref FLASH_Type_Erase */
+
+ uint32_t PageAddress; /*!< PageAdress: Initial FLASH page address to erase when mass erase is disabled
+ This parameter must be a value of @ref FLASHEx_Address */
+
+ uint32_t NbPages; /*!< NbPages: Number of pagess to be erased.
+ This parameter must be a value between 1 and (max number of pages - value of initial page)*/
+
+} FLASH_EraseInitTypeDef;
+
+/**
+ * @brief FLASH Options bytes program structure definition
+ */
+typedef struct
+{
+ uint32_t OptionType; /*!< OptionType: Option byte to be configured.
+ This parameter can be a value of @ref FLASH_OB_Type */
+
+ uint32_t WRPState; /*!< WRPState: Write protection activation or deactivation.
+ This parameter can be a value of @ref FLASH_OB_WRP_State */
+
+ uint32_t WRPPage; /*!< WRPSector: specifies the page(s) to be write protected
+ This parameter can be a value of @ref FLASHEx_OB_Write_Protection */
+
+ uint8_t RDPLevel; /*!< RDPLevel: Set the read protection level..
+ This parameter can be a value of @ref FLASH_OB_Read_Protection */
+
+ uint8_t USERConfig; /*!< USERConfig: Program the FLASH User Option Byte:
+ IWDG / STOP / STDBY / BOOT1 / VDDA_ANALOG / SRAM_PARITY / SDADC12_VDD_MONITOR
+ This parameter can be a combination of @ref FLASH_OB_IWatchdog, @ref FLASH_OB_nRST_STOP,
+ @ref FLASH_OB_nRST_STDBY, @ref FLASH_OB_BOOT1, @ref FLASH_OB_VDDA_Analog_Monitoring,
+ @ref FLASH_OB_SRAM_Parity_Enable and @ref FLASH_OB_SDADC12_VDD_MONITOR */
+
+ uint32_t DATAAddress; /*!< DATAAddress: Address of the option byte DATA to be prgrammed
+ This parameter can be a value of @ref FLASH_OB_Data_Address */
+
+ uint8_t DATAData; /*!< DATAData: Data to be stored in the option byte DATA
+ This parameter can have any value */
+
+} FLASH_OBProgramInitTypeDef;
+
+/**
+ * @brief FLASH Procedure structure definition
+ */
+typedef enum
+{
+ FLASH_PROC_NONE = 0,
+ FLASH_PROC_PAGEERASE = 1,
+ FLASH_PROC_MASSERASE = 2,
+ FLASH_PROC_PROGRAMHALFWORD = 3,
+ FLASH_PROC_PROGRAMWORD = 4,
+ FLASH_PROC_PROGRAMDOUBLEWORD = 5
+} FLASH_ProcedureTypeDef;
+
+/**
+ * @brief FLASH handle Structure definition
+ */
+typedef struct
+{
+ __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /* Internal variable to indicate which procedure is ongoing or not in IT context */
+
+ __IO uint32_t DataRemaining; /* Internal variable to save the remaining pages to erase or half-word to program in IT context */
+
+ __IO uint32_t Address; /* Internal variable to save address selected for program or erase */
+
+ __IO uint64_t Data; /* Internal variable to save data to be programmed */
+
+ HAL_LockTypeDef Lock; /* FLASH locking object */
+
+ __IO FLASH_ErrorTypeDef ErrorCode; /* FLASH error code */
+
+} FLASH_ProcessTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
+ * @{
+ */
+
+/** @defgroup FLASH_Type_Erase FLASH Type Erase
+ * @{
+ */
+#define TYPEERASE_PAGES ((uint32_t)0x00) /*!<Pages erase only*/
+#define TYPEERASE_MASSERASE ((uint32_t)0x01) /*!<Flash mass erase activation*/
+
+#define IS_TYPEERASE(VALUE) (((VALUE) == TYPEERASE_PAGES) || \
+ ((VALUE) == TYPEERASE_MASSERASE))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Type_Program FLASH Type Program
+ * @{
+ */
+#define TYPEPROGRAM_HALFWORD ((uint32_t)0x01) /*!<Program a half-word (16-bit) at a specified address.*/
+#define TYPEPROGRAM_WORD ((uint32_t)0x02) /*!<Program a word (32-bit) at a specified address.*/
+#define TYPEPROGRAM_DOUBLEWORD ((uint32_t)0x03) /*!<Program a double word (64-bit) at a specified address*/
+
+#define IS_TYPEPROGRAM(VALUE) (((VALUE) == TYPEPROGRAM_HALFWORD) || \
+ ((VALUE) == TYPEPROGRAM_WORD) || \
+ ((VALUE) == TYPEPROGRAM_DOUBLEWORD))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_WRP_State FLASH WRP State
+ * @{
+ */
+#define WRPSTATE_DISABLE ((uint32_t)0x00) /*!<Disable the write protection of the desired pages*/
+#define WRPSTATE_ENABLE ((uint32_t)0x01) /*!<Enable the write protection of the desired pagess*/
+
+#define IS_WRPSTATE(VALUE) (((VALUE) == WRPSTATE_DISABLE) || \
+ ((VALUE) == WRPSTATE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_Type FLASH Option Bytes Type
+ * @{
+ */
+#define OPTIONBYTE_WRP ((uint32_t)0x01) /*!<WRP option byte configuration*/
+#define OPTIONBYTE_RDP ((uint32_t)0x02) /*!<RDP option byte configuration*/
+#define OPTIONBYTE_USER ((uint32_t)0x04) /*!<USER option byte configuration*/
+#define OPTIONBYTE_DATA ((uint32_t)0x08) /*!<DATA option byte configuration*/
+
+#define IS_OPTIONBYTE(VALUE) (((VALUE) < (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA)))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Latency FLASH Latency
+ * @{
+ */
+#define FLASH_LATENCY_0 ((uint8_t)0x0000) /*!< FLASH Zero Latency cycle */
+#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_0 /*!< FLASH One Latency cycle */
+#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_1 /*!< FLASH Two Latency cycles */
+
+#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \
+ ((LATENCY) == FLASH_LATENCY_1) || \
+ ((LATENCY) == FLASH_LATENCY_2))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_Data_Address FLASH Option Byte Data Address
+ * @{
+ */
+#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == 0x1FFFF804) || ((ADDRESS) == 0x1FFFF806))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_Read_Protection FLASH Option Byte Read Protection
+ * @{
+ */
+#define OB_RDP_LEVEL_0 ((uint8_t)0xAA)
+#define OB_RDP_LEVEL_1 ((uint8_t)0xBB)
+#define OB_RDP_LEVEL_2 ((uint8_t)0xCC) /*!< Warning: When enabling read protection level 2
+ it's no more possible to go back to level 1 or 0 */
+#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\
+ ((LEVEL) == OB_RDP_LEVEL_1))/*||\
+ ((LEVEL) == OB_RDP_LEVEL_2))*/
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_IWatchdog FLASH Option Byte IWatchdog
+ * @{
+ */
+#define OB_IWDG_SW ((uint8_t)0x01) /*!< Software IWDG selected */
+#define OB_IWDG_HW ((uint8_t)0x00) /*!< Hardware IWDG selected */
+#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_nRST_STOP FLASH Option Byte nRST STOP
+ * @{
+ */
+#define OB_STOP_NO_RST ((uint8_t)0x02) /*!< No reset generated when entering in STOP */
+#define OB_STOP_RST ((uint8_t)0x00) /*!< Reset generated when entering in STOP */
+#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_nRST_STDBY FLASH Option Byte nRST STDBY
+ * @{
+ */
+#define OB_STDBY_NO_RST ((uint8_t)0x04) /*!< No reset generated when entering in STANDBY */
+#define OB_STDBY_RST ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY */
+#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_BOOT1 FLASH Option Byte BOOT1
+ * @{
+ */
+#define OB_BOOT1_RESET ((uint8_t)0x00) /*!< BOOT1 Reset */
+#define OB_BOOT1_SET ((uint8_t)0x10) /*!< BOOT1 Set */
+#define IS_OB_BOOT1(BOOT1) (((BOOT1) == OB_BOOT1_RESET) || ((BOOT1) == OB_BOOT1_SET))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_VDDA_Analog_Monitoring FLASH Option Byte VDDA Analog Monitoring
+ * @{
+ */
+#define OB_VDDA_ANALOG_ON ((uint8_t)0x20) /*!< Analog monitoring on VDDA Power source ON */
+#define OB_VDDA_ANALOG_OFF ((uint8_t)0x00) /*!< Analog monitoring on VDDA Power source OFF */
+#define IS_OB_VDDA_ANALOG(ANALOG) (((ANALOG) == OB_VDDA_ANALOG_ON) || ((ANALOG) == OB_VDDA_ANALOG_OFF))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_SRAM_Parity_Enable FLASH Option Byte SRAM Parity Enable
+ * @{
+ */
+#define OB_SRAM_PARITY_SET ((uint8_t)0x00) /*!< SRAM parity enable set */
+#define OB_SRAM_PARITY_RESET ((uint8_t)0x40) /*!< SRAM parity enable reset */
+#define IS_OB_SRAM_PARITY(PARITY) (((PARITY) == OB_SRAM_PARITY_SET) || ((PARITY) == OB_SRAM_PARITY_RESET))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_OB_SDADC12_VDD_MONITOR FLASH Option Byte SDADC12 VDD MONITOR
+ * @{
+ */
+#define OB_SDADC12_VDD_MONITOR_SET ((uint8_t)0x80) /*!< SDADC12_VDD power supply supervisor set */
+#define OB_SDADC12_VDD_MONITOR_RESET ((uint8_t)0x00) /*!< SDADC12_VDD power supply supervisor reset */
+#define IS_OB_SDADC12_VDD_MONITOR(MONITOR) (((MONITOR) == OB_SDADC12_VDD_MONITOR_SET) || ((MONITOR) == OB_SDADC12_VDD_MONITOR_RESET))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Flag_definition FLASH Flag definition
+ * @brief Flag definition
+ * @{
+ */
+#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */
+#define FLASH_FLAG_PGERR FLASH_SR_PGERR /*!< FLASH Programming error flag */
+#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */
+#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */
+
+#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFC3) == 0x00000000) && ((FLAG) != 0x00000000))
+#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_PGERR) || \
+ ((FLAG) == FLASH_FLAG_WRPERR) || ((FLAG) == FLASH_FLAG_EOP))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
+ * @brief FLASH Interrupt definition
+ * @{
+ */
+#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */
+#define FLASH_IT_ERR FLASH_CR_ERRIE /*!< Error Interrupt source */
+#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0xFFFFEBFF) == 0x00000000) && ((IT) != 0x00000000))
+/**
+ * @}
+ */
+
+/** @defgroup FLASH_Timeout_definition FLASH Timeout definition
+ * @brief FLASH Timeout definition
+ * @{
+ */
+#define HAL_FLASH_TIMEOUT_VALUE ((uint32_t)50000)/* 50 s */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
+ * @brief macros to control FLASH features
+ * @{
+ */
+
+/**
+ * @brief Set the FLASH Latency.
+ * @param __LATENCY__: FLASH Latency
+ * The value of this parameter depend on device used within the same series
+ * @retval None
+ */
+#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (FLASH->ACR = (FLASH->ACR&(~FLASH_ACR_LATENCY)) | (__LATENCY__))
+
+/**
+ * @brief Enable the FLASH prefetch buffer.
+ * @retval None
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTBE)
+
+/**
+ * @brief Disable the FLASH prefetch buffer.
+ * @retval None
+ */
+#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTBE))
+
+/**
+ * @brief Enable the FLASH half cycle access.
+ * @retval None
+ */
+#define __HAL_FLASH_HALF_CYCLE_ACCESS_ENABLE() (FLASH->ACR |= FLASH_ACR_HLFCYA)
+
+/**
+ * @brief Disable the FLASH half cycle access.
+ * @retval None
+ */
+#define __HAL_FLASH_HALF_CYCLE_ACCESS_DISABLE() (FLASH->ACR &= (~FLASH_ACR_HLFCYA))
+
+/** @defgroup FLASH_Interrupt FLASH Interrupt
+ * @brief macros to handle FLASH interrupts
+ * @{
+ */
+
+/**
+ * @brief Enable the specified FLASH interrupt.
+ * @param __INTERRUPT__ : FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+ * @arg FLASH_IT_ERR: Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the specified FLASH interrupt.
+ * @param __INTERRUPT__ : FLASH interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
+ * @arg FLASH_IT_ERR: Error Interrupt
+ * @retval none
+ */
+#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
+
+/**
+ * @brief Get the specified FLASH flag status.
+ * @param __FLAG__: specifies the FLASH flag to check.
+ * This parameter can be one of the following values:
+ * @arg FLASH_FLAG_EOP : FLASH End of Operation flag
+ * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_PGERR : FLASH Programming error flag
+ * @arg FLASH_FLAG_BSY : FLASH Busy flag
+ * @retval The new state of __FLAG__ (SET or RESET).
+ */
+#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear the specified FLASH flag.
+ * @param __FLAG__: specifies the FLASH flags to clear.
+ * This parameter can be any combination of the following values:
+ * @arg FLASH_FLAG_EOP : FLASH End of Operation flag
+ * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag
+ * @arg FLASH_FLAG_PGERR : FLASH Programming error flag
+ * @retval none
+ */
+#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Include FLASH HAL Extended module */
+#include "stm32f3xx_hal_flash_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASH_Exported_Functions FLASH Exported Functions
+ * @{
+ */
+
+/** @addtogroup FLASH_Exported_Functions_Group1 Input and Output operation functions
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
+
+/* FLASH IRQ handler method */
+void HAL_FLASH_IRQHandler(void);
+/* Callbacks in non blocking modes */
+void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
+void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
+
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH_Exported_Functions_Group2 Peripheral Control functions
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_FLASH_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_Lock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void);
+HAL_StatusTypeDef HAL_FLASH_OB_Lock(void);
+/* Option bytes control */
+HAL_StatusTypeDef HAL_FLASH_OB_Launch(void);
+
+/**
+ * @}
+ */
+
+/** @addtogroup FLASH_Exported_Functions_Group3 Peripheral State functions
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+FLASH_ErrorTypeDef HAL_FLASH_GetError(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported Private function -------------------------------------------------*/
+/** @addtogroup FLASH_Exported_Private_Functions FLASH Exported Private Functions
+ * @{
+ */
+/* Erase operations */
+void FLASH_PageErase(uint32_t PageAddress);
+HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
+
+/* Program operations */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_FLASH_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_flash_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,283 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_flash_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of Flash HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_FLASH_EX_H
+#define __STM32F3xx_HAL_FLASH_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FLASHEx FLASH Extended HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup FLASHEx_Exported_Constants FLASH Extended Exported Constants
+ * @{
+ */
+#define FLASH_SIZE_DATA_REGISTER ((uint32_t)0x1FFFF7CC)
+#define FLASH_PAGE_SIZE 0x800
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Address FLASH Extended Address
+ * @{
+ */
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x100) ? \
+ ((ADDRESS) <= 0x0803FFFF) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80) ? \
+ ((ADDRESS) <= 0x0801FFFF) : ((ADDRESS) <= 0x0800FFFF))))
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) <= 0x0807FFFF))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x40) ? \
+ ((ADDRESS) <= 0x0800FFFF) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20) ? \
+ ((ADDRESS) <= 0x08007FFF) : ((ADDRESS) <= 0x08003FFF))))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_Nb_Pages FLASH Extended Nb Pages
+ * @{
+ */
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x100) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0803FFFF) : \
+ (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0801FFFF) : \
+ ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0800FFFF)))
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0807FFFF)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x40) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0800FFFF) : \
+ (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08007FFF) : \
+ ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08003FFF)))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+/**
+ * @}
+ */
+
+/** @defgroup FLASHEx_OB_Write_Protection FLASH Extended Option Bytes Write Protection
+ * @{
+ */
+#define OB_WRP_PAGES0TO1 ((uint32_t)0x00000001) /* Write protection of page 0 to 1 */
+#define OB_WRP_PAGES2TO3 ((uint32_t)0x00000002) /* Write protection of page 2 to 3 */
+#define OB_WRP_PAGES4TO5 ((uint32_t)0x00000004) /* Write protection of page 4 to 5 */
+#define OB_WRP_PAGES6TO7 ((uint32_t)0x00000008) /* Write protection of page 6 to 7 */
+#define OB_WRP_PAGES8TO9 ((uint32_t)0x00000010) /* Write protection of page 8 to 9 */
+#define OB_WRP_PAGES10TO11 ((uint32_t)0x00000020) /* Write protection of page 10 to 11 */
+#define OB_WRP_PAGES12TO13 ((uint32_t)0x00000040) /* Write protection of page 12 to 13 */
+#define OB_WRP_PAGES14TO15 ((uint32_t)0x00000080) /* Write protection of page 14 to 15 */
+#define OB_WRP_PAGES16TO17 ((uint32_t)0x00000100) /* Write protection of page 16 to 17 */
+#define OB_WRP_PAGES18TO19 ((uint32_t)0x00000200) /* Write protection of page 18 to 19 */
+#define OB_WRP_PAGES20TO21 ((uint32_t)0x00000400) /* Write protection of page 20 to 21 */
+#define OB_WRP_PAGES22TO23 ((uint32_t)0x00000800) /* Write protection of page 22 to 23 */
+#define OB_WRP_PAGES24TO25 ((uint32_t)0x00001000) /* Write protection of page 24 to 25 */
+#define OB_WRP_PAGES26TO27 ((uint32_t)0x00002000) /* Write protection of page 26 to 27 */
+#define OB_WRP_PAGES28TO29 ((uint32_t)0x00004000) /* Write protection of page 28 to 29 */
+#define OB_WRP_PAGES30TO31 ((uint32_t)0x00008000) /* Write protection of page 30 to 31 */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+#define OB_WRP_PAGES32TO33 ((uint32_t)0x00010000) /* Write protection of page 32 to 33 */
+#define OB_WRP_PAGES34TO35 ((uint32_t)0x00020000) /* Write protection of page 34 to 35 */
+#define OB_WRP_PAGES36TO37 ((uint32_t)0x00040000) /* Write protection of page 36 to 37 */
+#define OB_WRP_PAGES38TO39 ((uint32_t)0x00080000) /* Write protection of page 38 to 39 */
+#define OB_WRP_PAGES40TO41 ((uint32_t)0x00100000) /* Write protection of page 40 to 41 */
+#define OB_WRP_PAGES42TO43 ((uint32_t)0x00200000) /* Write protection of page 42 to 43 */
+#define OB_WRP_PAGES44TO45 ((uint32_t)0x00400000) /* Write protection of page 44 to 45 */
+#define OB_WRP_PAGES46TO47 ((uint32_t)0x00800000) /* Write protection of page 46 to 47 */
+#define OB_WRP_PAGES48TO49 ((uint32_t)0x01000000) /* Write protection of page 48 to 49 */
+#define OB_WRP_PAGES50TO51 ((uint32_t)0x02000000) /* Write protection of page 50 to 51 */
+#define OB_WRP_PAGES52TO53 ((uint32_t)0x04000000) /* Write protection of page 52 to 53 */
+#define OB_WRP_PAGES54TO55 ((uint32_t)0x08000000) /* Write protection of page 54 to 55 */
+#define OB_WRP_PAGES56TO57 ((uint32_t)0x10000000) /* Write protection of page 56 to 57 */
+#define OB_WRP_PAGES58TO59 ((uint32_t)0x20000000) /* Write protection of page 58 to 59 */
+#define OB_WRP_PAGES60TO61 ((uint32_t)0x40000000) /* Write protection of page 60 to 61 */
+#define OB_WRP_PAGES62TO127 ((uint32_t)0x80000000) /* Write protection of page 62 to 127 */
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define OB_WRP_PAGES32TO33 ((uint32_t)0x00010000) /* Write protection of page 32 to 33 */
+#define OB_WRP_PAGES34TO35 ((uint32_t)0x00020000) /* Write protection of page 34 to 35 */
+#define OB_WRP_PAGES36TO37 ((uint32_t)0x00040000) /* Write protection of page 36 to 37 */
+#define OB_WRP_PAGES38TO39 ((uint32_t)0x00080000) /* Write protection of page 38 to 39 */
+#define OB_WRP_PAGES40TO41 ((uint32_t)0x00100000) /* Write protection of page 40 to 41 */
+#define OB_WRP_PAGES42TO43 ((uint32_t)0x00200000) /* Write protection of page 42 to 43 */
+#define OB_WRP_PAGES44TO45 ((uint32_t)0x00400000) /* Write protection of page 44 to 45 */
+#define OB_WRP_PAGES46TO47 ((uint32_t)0x00800000) /* Write protection of page 46 to 47 */
+#define OB_WRP_PAGES48TO49 ((uint32_t)0x01000000) /* Write protection of page 48 to 49 */
+#define OB_WRP_PAGES50TO51 ((uint32_t)0x02000000) /* Write protection of page 50 to 51 */
+#define OB_WRP_PAGES52TO53 ((uint32_t)0x04000000) /* Write protection of page 52 to 53 */
+#define OB_WRP_PAGES54TO55 ((uint32_t)0x08000000) /* Write protection of page 54 to 55 */
+#define OB_WRP_PAGES56TO57 ((uint32_t)0x10000000) /* Write protection of page 56 to 57 */
+#define OB_WRP_PAGES58TO59 ((uint32_t)0x20000000) /* Write protection of page 58 to 59 */
+#define OB_WRP_PAGES60TO61 ((uint32_t)0x40000000) /* Write protection of page 60 to 61 */
+#define OB_WRP_PAGES62TO255 ((uint32_t)0x80000000) /* Write protection of page 62 to 255 */
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#define OB_WRP_PAGES0TO15MASK ((uint32_t)0x000000FF)
+#define OB_WRP_PAGES16TO31MASK ((uint32_t)0x0000FF00)
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+#define OB_WRP_PAGES32TO47MASK ((uint32_t)0x00FF0000)
+#define OB_WRP_PAGES48TO127MASK ((uint32_t)0xFF000000)
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define OB_WRP_PAGES32TO47MASK ((uint32_t)0x00FF0000)
+#define OB_WRP_PAGES48TO255MASK ((uint32_t)0xFF000000)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+#define OB_WRP_PAGES32TO47MASK ((uint32_t)0x00FF0000)
+#define OB_WRP_PAGES48TO127MASK ((uint32_t)0xFF000000)
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+#define OB_WRP_ALLPAGES ((uint32_t)0xFFFFFFFF) /*!< Write protection of all pages */
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define OB_WRP_ALLPAGES ((uint32_t)0x0000FFFF) /*!< Write protection of all pages */
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#define IS_OB_WRP(PAGE) (((PAGE) != 0x0000000))
+/**
+ * @}
+ */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup FLASHEx_OB_SDADC12_VDD_MONITOR FLASH Extended Option Bytes SDADC12 VDD MONITOR
+ * @{
+ */
+#define OB_SDACD_VDD_MONITOR_RESET ((uint8_t)0x00) /*!< SDADC VDD Monitor reset */
+#define OB_SDACD_VDD_MONITOR_SET ((uint8_t)0x80) /*!< SDADC VDD Monitor set */
+
+#define IS_OB_SDACD_VDD_MONITOR(VDD_MONITOR) (((VDD_MONITOR) == OB_SDACD_VDD_MONITOR_SET) || \
+ ((VDD_MONITOR) == OB_SDACD_VDD_MONITOR_RESET))
+/**
+ * @}
+ */
+#endif /* STM32F373xC || STM32F378xx */
+
+
+/* Exported macro ------------------------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup FLASHEx_Exported_Functions FLASH Extended Exported Functions
+ * @{
+ */
+
+/** @addtogroup FLASHEx_Exported_Functions_Group1 Extended Input and Output operation functions
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError);
+HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit);
+
+/**
+ * @}
+ */
+
+/** @addtogroup FLASHEx_Exported_Functions_Group2 Extended Peripheral Control functions
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_FLASHEx_OBErase(void);
+HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit);
+void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_FLASH_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_gpio.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,307 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_gpio.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of GPIO HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_GPIO_H
+#define __STM32F3xx_HAL_GPIO_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup GPIO GPIO HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Types GPIO Exported Types
+ * @{
+ */
+
+/**
+ * @brief GPIO Init structure definition
+ */
+typedef struct
+{
+ uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
+ This parameter can be any value of @ref GPIO_pins_define */
+
+ uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref GPIO_mode_define */
+
+ uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
+ This parameter can be a value of @ref GPIO_pull_define */
+
+ uint32_t Speed; /*!< Specifies the speed for the selected pins.
+ This parameter can be a value of @ref GPIO_speed_define */
+
+ uint32_t Alternate; /*!< Peripheral to be connected to the selected pins
+ This parameter can be a value of @ref GPIOEx_Alternate_function_selection */
+}GPIO_InitTypeDef;
+
+/**
+ * @brief GPIO Bit SET and Bit RESET enumeration
+ */
+typedef enum
+{
+ GPIO_PIN_RESET = 0,
+ GPIO_PIN_SET
+}GPIO_PinState;
+#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
+ * @{
+ */
+
+/** @defgroup GPIO_pins_define GPIO pins define
+ * @{
+ */
+#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */
+#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */
+#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */
+#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */
+#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */
+#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */
+#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */
+#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */
+#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */
+#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */
+#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */
+#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */
+#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */
+#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */
+#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */
+#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */
+#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */
+
+#define GPIO_PIN_MASK ((uint32_t)0x0000FFFF) /* PIN mask for assert test */
+
+#define IS_GPIO_PIN(PIN) (((PIN) & GPIO_PIN_MASK) != (uint32_t)0x00)
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_mode_define GPIO mode define
+ * @brief GPIO Configuration Mode
+ * Elements values convention: 0xX0yz00YZ
+ * - X : GPIO mode or EXTI Mode
+ * - y : External IT or Event trigger detection
+ * - z : IO configuration on External IT or Event
+ * - Y : Output type (Push Pull or Open Drain)
+ * - Z : IO Direction mode (Input, Output, Alternate or Analog)
+ * @{
+ */
+#define GPIO_MODE_INPUT ((uint32_t)0x00000000) /*!< Input Floating Mode */
+#define GPIO_MODE_OUTPUT_PP ((uint32_t)0x00000001) /*!< Output Push Pull Mode */
+#define GPIO_MODE_OUTPUT_OD ((uint32_t)0x00000011) /*!< Output Open Drain Mode */
+#define GPIO_MODE_AF_PP ((uint32_t)0x00000002) /*!< Alternate Function Push Pull Mode */
+#define GPIO_MODE_AF_OD ((uint32_t)0x00000012) /*!< Alternate Function Open Drain Mode */
+
+#define GPIO_MODE_ANALOG ((uint32_t)0x00000003) /*!< Analog Mode */
+
+#define GPIO_MODE_IT_RISING ((uint32_t)0x10110000) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define GPIO_MODE_IT_FALLING ((uint32_t)0x10210000) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define GPIO_MODE_IT_RISING_FALLING ((uint32_t)0x10310000) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+
+#define GPIO_MODE_EVT_RISING ((uint32_t)0x10120000) /*!< External Event Mode with Rising edge trigger detection */
+#define GPIO_MODE_EVT_FALLING ((uint32_t)0x10220000) /*!< External Event Mode with Falling edge trigger detection */
+#define GPIO_MODE_EVT_RISING_FALLING ((uint32_t)0x10320000) /*!< External Event Mode with Rising/Falling edge trigger detection */
+
+#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\
+ ((MODE) == GPIO_MODE_OUTPUT_PP) ||\
+ ((MODE) == GPIO_MODE_OUTPUT_OD) ||\
+ ((MODE) == GPIO_MODE_AF_PP) ||\
+ ((MODE) == GPIO_MODE_AF_OD) ||\
+ ((MODE) == GPIO_MODE_IT_RISING) ||\
+ ((MODE) == GPIO_MODE_IT_FALLING) ||\
+ ((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\
+ ((MODE) == GPIO_MODE_EVT_RISING) ||\
+ ((MODE) == GPIO_MODE_EVT_FALLING) ||\
+ ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
+ ((MODE) == GPIO_MODE_ANALOG))
+
+/**
+ * @}
+ */
+
+/** @defgroup GPIO_speed_define GPIO speed define
+ * @brief GPIO Output Maximum frequency
+ * @{
+ */
+#define GPIO_SPEED_LOW ((uint32_t)0x00000000) /*!< Low speed */
+#define GPIO_SPEED_MEDIUM ((uint32_t)0x00000001) /*!< Medium speed */
+#define GPIO_SPEED_HIGH ((uint32_t)0x00000003) /*!< High speed */
+
+#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_LOW) || ((SPEED) == GPIO_SPEED_MEDIUM) || \
+ ((SPEED) == GPIO_SPEED_HIGH))
+/**
+ * @}
+ */
+
+ /** @defgroup GPIO_pull_define GPIO pull define
+ * @brief GPIO Pull-Up or Pull-Down Activation
+ * @{
+ */
+#define GPIO_NOPULL ((uint32_t)0x00000000) /*!< No Pull-up or Pull-down activation */
+#define GPIO_PULLUP ((uint32_t)0x00000001) /*!< Pull-up activation */
+#define GPIO_PULLDOWN ((uint32_t)0x00000002) /*!< Pull-down activation */
+
+#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
+ ((PULL) == GPIO_PULLDOWN))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Checks whether the specified EXTI line flag is set or not.
+ * @param __EXTI_LINE__: specifies the EXTI line flag to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clears the EXTI's line pending flags.
+ * @param __EXTI_LINE__: specifies the EXTI lines flags to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Checks whether the specified EXTI line is asserted or not.
+ * @param __EXTI_LINE__: specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval The new state of __EXTI_LINE__ (SET or RESET).
+ */
+#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
+
+/**
+ * @brief Clears the EXTI's line pending bits.
+ * @param __EXTI_LINE__: specifies the EXTI lines to clear.
+ * This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
+
+/**
+ * @brief Generates a Software interrupt on selected EXTI line.
+ * @param __EXTI_LINE__: specifies the EXTI line to check.
+ * This parameter can be GPIO_PIN_x where x can be(0..15)
+ * @retval None
+ */
+#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
+
+/**
+ * @}
+ */
+
+/* Include GPIO HAL Extended module */
+#include "stm32f3xx_hal_gpio_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup GPIO_Exported_Functions GPIO Exported Functions
+* @{
+*/
+
+/** @addtogroup GPIO_Exported_Functions_Group1 Initialization and de-initialization functions
+* @{
+*/
+/* Initialization and de-initialization functions *****************************/
+void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
+void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin);
+
+/**
+ * @}
+ */
+
+/** @addtogroup GPIO_Exported_Functions_Group2 Input and Output operation functions
+* @{
+*/
+/* IO operation functions *****************************************************/
+GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
+void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
+void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_GPIO_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_gpio_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1498 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_gpio_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of GPIO HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_GPIO_EX_H
+#define __STM32F3xx_HAL_GPIO_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup GPIOEx GPIO Extended HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup GPIOEx_Exported_Constants GPIO Extended Exported Constants
+ * @{
+ */
+
+/** @defgroup GPIOEx_Alternate_function_selection GPIO Extended Alternate function selection
+ * @{
+ */
+
+#if defined (STM32F302xC)
+/*---------------------------------- STM32F302xC ------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_COMP1 ((uint8_t)0x02) /* COMP1 Alternate Function mapping */
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /* TSC Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04) /* TIM17 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_I2S ((uint8_t)0x05) /* I2S Alternate Function mapping */
+#define GPIO_AF5_I2S2ext ((uint8_t)0x05) /* I2S2ext Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05) /* IR Alternate Function mapping */
+#define GPIO_AF5_UART4 ((uint8_t)0x05) /* UART4 Alternate Function mapping */
+#define GPIO_AF5_UART5 ((uint8_t)0x05) /* UART5 Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S3ext ((uint8_t)0x06) /* I2S3ext Alternate Function mapping */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06) /* IR Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_COMP6 ((uint8_t)0x07) /* COMP6 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08) /* COMP2 Alternate Function mapping */
+#define GPIO_AF8_COMP4 ((uint8_t)0x08) /* COMP4 Alternate Function mapping */
+#define GPIO_AF8_COMP6 ((uint8_t)0x08) /* COMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xA) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xA) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xA) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xA) /* TIM17 Alternate Function mapping */
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0B) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0xC) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 14 selection
+ */
+
+#define GPIO_AF14_USB ((uint8_t)0x0E) /* USB Alternate Function mapping */
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0C) || ((AF) == (uint8_t)0x0E) || ((AF) == (uint8_t)0x0F))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F302xC */
+
+#if defined (STM32F303xC)
+/*---------------------------------- STM32F303xC ------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM8 ((uint8_t)0x02) /* TIM8 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_COMP1 ((uint8_t)0x02) /* COMP1 Alternate Function mapping */
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /* TSC Alternate Function mapping */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_COMP7 ((uint8_t)0x03) /* COMP7 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM8 ((uint8_t)0x04) /* TIM8 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04) /* TIM17 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_I2S ((uint8_t)0x05) /* I2S Alternate Function mapping */
+#define GPIO_AF5_I2S2ext ((uint8_t)0x05) /* I2S2ext Alternate Function mapping */
+#define GPIO_AF5_TIM8 ((uint8_t)0x05) /* TIM8 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05) /* IR Alternate Function mapping */
+#define GPIO_AF5_UART4 ((uint8_t)0x05) /* UART4 Alternate Function mapping */
+#define GPIO_AF5_UART5 ((uint8_t)0x05) /* UART5 Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S3ext ((uint8_t)0x06) /* I2S3ext Alternate Function mapping */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_TIM8 ((uint8_t)0x06) /* TIM8 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06) /* IR Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_COMP3 ((uint8_t)0x07) /* COMP3 Alternate Function mapping */
+#define GPIO_AF7_COMP5 ((uint8_t)0x07) /* COMP5 Alternate Function mapping */
+#define GPIO_AF7_COMP6 ((uint8_t)0x07) /* COMP6 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08) /* COMP2 Alternate Function mapping */
+#define GPIO_AF8_COMP3 ((uint8_t)0x08) /* COMP3 Alternate Function mapping */
+#define GPIO_AF8_COMP4 ((uint8_t)0x08) /* COMP4 Alternate Function mapping */
+#define GPIO_AF8_COMP5 ((uint8_t)0x08) /* COMP5 Alternate Function mapping */
+#define GPIO_AF8_COMP6 ((uint8_t)0x08) /* COMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM8 ((uint8_t)0x09) /* TIM8 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xA) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xA) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xA) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM8 ((uint8_t)0xA) /* TIM8 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xA) /* TIM17 Alternate Function mapping */
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0B) /* TIM1 Alternate Function mapping */
+#define GPIO_AF11_TIM8 ((uint8_t)0x0B) /* TIM8 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0xC) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 14 selection
+ */
+
+#define GPIO_AF14_USB ((uint8_t)0x0E) /* USB Alternate Function mapping */
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0C) || ((AF) == (uint8_t)0x0E) || ((AF) == (uint8_t)0x0F))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F303xC */
+
+#if defined (STM32F303xE)
+/*---------------------------------- STM32F303xE ------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /* EVENTOUT Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM8 ((uint8_t)0x02) /* TIM8 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_COMP1 ((uint8_t)0x02) /* COMP1 Alternate Function mapping */
+#define GPIO_AF2_I2C3 ((uint8_t)0x02) /* I2C3 Alternate Function mapping */
+#define GPIO_AF2_TIM20 ((uint8_t)0x02) /* TIM20 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /* TSC Alternate Function mapping */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_COMP7 ((uint8_t)0x03) /* COMP7 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /* TIM15 Alternate Function mapping */
+#define GPIO_AF3_I2C3 ((uint8_t)0x03) /* I2C3 Alternate Function mapping */
+#define GPIO_AF3_TIM20 ((uint8_t)0x03) /* TIM20 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM8 ((uint8_t)0x04) /* TIM8 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04) /* TIM17 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_I2S ((uint8_t)0x05) /* I2S Alternate Function mapping */
+#define GPIO_AF5_I2S2ext ((uint8_t)0x05) /* I2S2ext Alternate Function mapping */
+#define GPIO_AF5_TIM8 ((uint8_t)0x05) /* TIM8 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05) /* IR Alternate Function mapping */
+#define GPIO_AF5_UART4 ((uint8_t)0x05) /* UART4 Alternate Function mapping */
+#define GPIO_AF5_UART5 ((uint8_t)0x05) /* UART5 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S3ext ((uint8_t)0x06) /* I2S3ext Alternate Function mapping */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_TIM8 ((uint8_t)0x06) /* TIM8 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06) /* IR Alternate Function mapping */
+#define GPIO_AF6_TIM20 ((uint8_t)0x06) /* TIM20 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_COMP3 ((uint8_t)0x07) /* COMP3 Alternate Function mapping */
+#define GPIO_AF7_COMP5 ((uint8_t)0x07) /* COMP5 Alternate Function mapping */
+#define GPIO_AF7_COMP6 ((uint8_t)0x07) /* COMP6 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08) /* COMP2 Alternate Function mapping */
+#define GPIO_AF8_COMP3 ((uint8_t)0x08) /* COMP3 Alternate Function mapping */
+#define GPIO_AF8_COMP4 ((uint8_t)0x08) /* COMP4 Alternate Function mapping */
+#define GPIO_AF8_COMP5 ((uint8_t)0x08) /* COMP5 Alternate Function mapping */
+#define GPIO_AF8_COMP6 ((uint8_t)0x08) /* COMP6 Alternate Function mapping */
+#define GPIO_AF8_I2C3 ((uint8_t)0x08) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM8 ((uint8_t)0x09) /* TIM8 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xA) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xA) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xA) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM8 ((uint8_t)0xA) /* TIM8 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xA) /* TIM17 Alternate Function mapping */
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0B) /* TIM1 Alternate Function mapping */
+#define GPIO_AF11_TIM8 ((uint8_t)0x0B) /* TIM8 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0xC) /* TIM1 Alternate Function mapping */
+#define GPIO_AF12_FMC ((uint8_t)0xC) /* FMC Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 14 selection
+ */
+#define GPIO_AF14_USB ((uint8_t)0x0E) /* USB Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0C) || ((AF) == (uint8_t)0x0E) || ((AF) == (uint8_t)0x0F))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F303xE */
+
+#if defined (STM32F302xE)
+/*---------------------------------- STM32F302xE ------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /* EVENTOUT Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_COMP1 ((uint8_t)0x02) /* COMP1 Alternate Function mapping */
+#define GPIO_AF2_I2C3 ((uint8_t)0x02) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /* TSC Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /* TIM15 Alternate Function mapping */
+#define GPIO_AF3_I2C3 ((uint8_t)0x03) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04) /* TIM17 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_I2S ((uint8_t)0x05) /* I2S Alternate Function mapping */
+#define GPIO_AF5_I2S2ext ((uint8_t)0x05) /* I2S2ext Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05) /* IR Alternate Function mapping */
+#define GPIO_AF5_UART4 ((uint8_t)0x05) /* UART4 Alternate Function mapping */
+#define GPIO_AF5_UART5 ((uint8_t)0x05) /* UART5 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S3ext ((uint8_t)0x06) /* I2S3ext Alternate Function mapping */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06) /* IR Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_COMP6 ((uint8_t)0x07) /* COMP6 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08) /* COMP2 Alternate Function mapping */
+#define GPIO_AF8_COMP4 ((uint8_t)0x08) /* COMP4 Alternate Function mapping */
+#define GPIO_AF8_COMP6 ((uint8_t)0x08) /* COMP6 Alternate Function mapping */
+#define GPIO_AF8_I2C3 ((uint8_t)0x08) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xA) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xA) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xA) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xA) /* TIM17 Alternate Function mapping */
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0B) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0xC) /* TIM1 Alternate Function mapping */
+#define GPIO_AF12_FMC ((uint8_t)0xC) /* FMC Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 14 selection
+ */
+#define GPIO_AF14_USB ((uint8_t)0x0E) /* USB Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0C) || ((AF) == (uint8_t)0x0E) || ((AF) == (uint8_t)0x0F))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F302xE */
+
+#if defined (STM32F398xx)
+/*---------------------------------- STM32F398xx ------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /* EVENTOUT Alternate Function mapping */
+
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM8 ((uint8_t)0x02) /* TIM8 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_COMP1 ((uint8_t)0x02) /* COMP1 Alternate Function mapping */
+#define GPIO_AF2_I2C3 ((uint8_t)0x02) /* I2C3 Alternate Function mapping */
+#define GPIO_AF2_TIM20 ((uint8_t)0x02) /* TIM20 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /* TSC Alternate Function mapping */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_COMP7 ((uint8_t)0x03) /* COMP7 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /* TIM15 Alternate Function mapping */
+#define GPIO_AF3_I2C3 ((uint8_t)0x03) /* I2C3 Alternate Function mapping */
+#define GPIO_AF3_TIM20 ((uint8_t)0x03) /* TIM20 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM8 ((uint8_t)0x04) /* TIM8 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04) /* TIM17 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_I2S ((uint8_t)0x05) /* I2S Alternate Function mapping */
+#define GPIO_AF5_I2S2ext ((uint8_t)0x05) /* I2S2ext Alternate Function mapping */
+#define GPIO_AF5_TIM8 ((uint8_t)0x05) /* TIM8 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05) /* IR Alternate Function mapping */
+#define GPIO_AF5_UART4 ((uint8_t)0x05) /* UART4 Alternate Function mapping */
+#define GPIO_AF5_UART5 ((uint8_t)0x05) /* UART5 Alternate Function mapping */
+#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S3ext ((uint8_t)0x06) /* I2S3ext Alternate Function mapping */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_TIM8 ((uint8_t)0x06) /* TIM8 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06) /* IR Alternate Function mapping */
+#define GPIO_AF6_TIM20 ((uint8_t)0x06) /* TIM20 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_COMP3 ((uint8_t)0x07) /* COMP3 Alternate Function mapping */
+#define GPIO_AF7_COMP5 ((uint8_t)0x07) /* COMP5 Alternate Function mapping */
+#define GPIO_AF7_COMP6 ((uint8_t)0x07) /* COMP6 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08) /* COMP2 Alternate Function mapping */
+#define GPIO_AF8_COMP3 ((uint8_t)0x08) /* COMP3 Alternate Function mapping */
+#define GPIO_AF8_COMP4 ((uint8_t)0x08) /* COMP4 Alternate Function mapping */
+#define GPIO_AF8_COMP5 ((uint8_t)0x08) /* COMP5 Alternate Function mapping */
+#define GPIO_AF8_COMP6 ((uint8_t)0x08) /* COMP6 Alternate Function mapping */
+#define GPIO_AF8_I2C3 ((uint8_t)0x08) /* I2C3 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM8 ((uint8_t)0x09) /* TIM8 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xA) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xA) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xA) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM8 ((uint8_t)0xA) /* TIM8 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xA) /* TIM17 Alternate Function mapping */
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0B) /* TIM1 Alternate Function mapping */
+#define GPIO_AF11_TIM8 ((uint8_t)0x0B) /* TIM8 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0xC) /* TIM1 Alternate Function mapping */
+#define GPIO_AF12_FMC ((uint8_t)0xC) /* FMC Alternate Function mapping */
+#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0C) || ((AF) == (uint8_t)0x0F))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F398xx */
+
+#if defined (STM32F358xx)
+/*---------------------------------- STM32F358xx -------------------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM8 ((uint8_t)0x02) /* TIM8 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_COMP1 ((uint8_t)0x02) /* COMP1 Alternate Function mapping */
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /* TSC Alternate Function mapping */
+#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */
+#define GPIO_AF3_COMP7 ((uint8_t)0x03) /* COMP7 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM8 ((uint8_t)0x04) /* TIM8 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04) /* TIM17 Alternate Function mapping */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_I2S ((uint8_t)0x05) /* I2S Alternate Function mapping */
+#define GPIO_AF5_I2S2ext ((uint8_t)0x05) /* I2S2ext Alternate Function mapping */
+#define GPIO_AF5_TIM8 ((uint8_t)0x05) /* TIM8 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05) /* IR Alternate Function mapping */
+#define GPIO_AF5_UART4 ((uint8_t)0x05) /* UART4 Alternate Function mapping */
+#define GPIO_AF5_UART5 ((uint8_t)0x05) /* UART5 Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_I2S3ext ((uint8_t)0x06) /* I2S3ext Alternate Function mapping */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_TIM8 ((uint8_t)0x06) /* TIM8 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06) /* IR Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_COMP3 ((uint8_t)0x07) /* COMP3 Alternate Function mapping */
+#define GPIO_AF7_COMP5 ((uint8_t)0x07) /* COMP5 Alternate Function mapping */
+#define GPIO_AF7_COMP6 ((uint8_t)0x07) /* COMP6 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08) /* COMP2 Alternate Function mapping */
+#define GPIO_AF8_COMP3 ((uint8_t)0x08) /* COMP3 Alternate Function mapping */
+#define GPIO_AF8_COMP4 ((uint8_t)0x08) /* COMP4 Alternate Function mapping */
+#define GPIO_AF8_COMP5 ((uint8_t)0x08) /* COMP5 Alternate Function mapping */
+#define GPIO_AF8_COMP6 ((uint8_t)0x08) /* COMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM8 ((uint8_t)0x09) /* TIM8 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xA) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xA) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xA) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM8 ((uint8_t)0xA) /* TIM8 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xA) /* TIM17 Alternate Function mapping */
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0B) /* TIM1 Alternate Function mapping */
+#define GPIO_AF11_TIM8 ((uint8_t)0x0B) /* TIM8 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0xC) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0C) || ((AF) == (uint8_t)0x0F))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F358xx */
+
+#if defined (STM32F373xC)
+/*---------------------------------- STM32F373xC--------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
+#define GPIO_AF2_TIM13 ((uint8_t)0x02) /* TIM13 Alternate Function mapping */
+#define GPIO_AF2_TIM14 ((uint8_t)0x02) /* TIM14 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_TIM19 ((uint8_t)0x02) /* TIM19 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /* TSC Alternate Function mapping */
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05) /* IR Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI1 ((uint8_t)0x06) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06) /* IR Alternate Function mapping */
+#define GPIO_AF6_CEC ((uint8_t)0x06) /* CEC Alternate Function mapping */
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07) /* CAN Alternate Function mapping */
+#define GPIO_AF7_CEC ((uint8_t)0x07) /* CEC Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08) /* COMP2 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09) /* TIM15 Alternate Function mapping */
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xA) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xA) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xA) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM12 ((uint8_t)0xA) /* TIM12 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xA) /* TIM17 Alternate Function mapping */
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM19 ((uint8_t)0x0B) /* TIM19 Alternate Function mapping */
+
+
+/**
+ * @brief AF 14 selection
+ */
+#define GPIO_AF14_USB ((uint8_t)0x0E) /* USB Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0B) || ((AF) == (uint8_t)0x0E) || ((AF) == (uint8_t)0x0F))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F373xC */
+
+
+#if defined (STM32F378xx)
+/*---------------------------------------- STM32F378xx--------------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */
+#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */
+#define GPIO_AF2_TIM13 ((uint8_t)0x02) /* TIM13 Alternate Function mapping */
+#define GPIO_AF2_TIM14 ((uint8_t)0x02) /* TIM14 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_TIM19 ((uint8_t)0x02) /* TIM19 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /* TSC Alternate Function mapping */
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05) /* IR Alternate Function mapping */
+
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_SPI1 ((uint8_t)0x06) /* SPI1/I2S1 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06) /* IR Alternate Function mapping */
+#define GPIO_AF6_CEC ((uint8_t)0x06) /* CEC Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07) /* CAN Alternate Function mapping */
+#define GPIO_AF7_CEC ((uint8_t)0x07) /* CEC Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_COMP1 ((uint8_t)0x08) /* COMP1 Alternate Function mapping */
+#define GPIO_AF8_COMP2 ((uint8_t)0x08) /* COMP2 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */
+#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */
+#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xA) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xA) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM4 ((uint8_t)0xA) /* TIM4 Alternate Function mapping */
+#define GPIO_AF10_TIM12 ((uint8_t)0xA) /* TIM12 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xA) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM19 ((uint8_t)0x0B) /* TIM19 Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0B) || ((AF) == (uint8_t)0x0F))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F378xx */
+
+#if defined (STM32F303x8)
+/*---------------------------------- STM32F303x8--------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /* TIM16 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /* TSC Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05) /* IR Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06) /* IR Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_GPCOMP6 ((uint8_t)0x07) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_GPCOMP2 ((uint8_t)0x08) /* GPCOMP2 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP4 ((uint8_t)0x08) /* GPCOMP4 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP6 ((uint8_t)0x08) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09) /* TIM15 Alternate Function mapping */
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xA) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xA) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xA) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0B) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0x0C) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_OPAMP2 ((uint8_t)0x0D) /* OPAMP2 Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0D) || ((AF) == (uint8_t)0x0F))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F303x8 */
+
+#if defined (STM32F334x8) || defined (STM32F328xx)
+/*---------------------------------- STM32F334x8/STM32F328xx -------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_TIM16 ((uint8_t)0x02) /* TIM16 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /* TSC Alternate Function mapping */
+#define GPIO_AF3_HRTIM1 ((uint8_t)0x03) /* HRTIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05) /* IR Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06) /* IR Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_GPCOMP6 ((uint8_t)0x07) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_GPCOMP2 ((uint8_t)0x08) /* GPCOMP2 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP4 ((uint8_t)0x08) /* GPCOMP4 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP6 ((uint8_t)0x08) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_CAN ((uint8_t)0x09) /* CAN Alternate Function mapping */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09) /* TIM15 Alternate Function mapping */
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xA) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM3 ((uint8_t)0xA) /* TIM3 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xA) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0B) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0x0C) /* TIM1 Alternate Function mapping */
+#define GPIO_AF12_HRTIM1 ((uint8_t)0x0C) /* HRTIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 13 selection
+ */
+#define GPIO_AF13_OPAMP2 ((uint8_t)0x0D) /* OPAMP2 Alternate Function mapping */
+#define GPIO_AF13_HRTIM1 ((uint8_t)0x0D) /* HRTIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0D) || ((AF) == (uint8_t)0x0F))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F334x8 || STM32F328xx */
+
+#if defined (STM32F301x8) || defined (STM32F318xx)
+/*---------------------------------- STM32F301x8 / STM32F318xx ------------------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_I2C3 ((uint8_t)0x02) /* I2C3 Alternate Function mapping */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /* TSC Alternate Function mapping */
+#define GPIO_AF3_I2C3 ((uint8_t)0x03) /* I2C3 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05) /* IR Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06) /* IR Alternate Function mapping */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_GPCOMP6 ((uint8_t)0x07) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_I2C3 ((uint8_t)0x08) /* I2C3 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP2 ((uint8_t)0x08) /* GPCOMP2 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP4 ((uint8_t)0x08) /* GPCOMP4 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP6 ((uint8_t)0x08) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xA) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xA) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0B) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0x0C) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0C) || ((AF) == (uint8_t)0x0F))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F301x8 || STM32F318xx */
+
+#if defined (STM32F302x8)
+/*---------------------------------- STM32F302x8------------------------------------------*/
+/**
+ * @brief AF 0 selection
+ */
+#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */
+#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC Alternate Function mapping */
+#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */
+#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */
+#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */
+
+/**
+ * @brief AF 1 selection
+ */
+#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */
+#define GPIO_AF1_TIM15 ((uint8_t)0x01) /* TIM15 Alternate Function mapping */
+#define GPIO_AF1_TIM16 ((uint8_t)0x01) /* TIM16 Alternate Function mapping */
+#define GPIO_AF1_TIM17 ((uint8_t)0x01) /* TIM17 Alternate Function mapping */
+#define GPIO_AF1_EVENTOUT ((uint8_t)0x01) /* EVENTOUT Alternate Function mapping */
+/**
+ * @brief AF 2 selection
+ */
+#define GPIO_AF2_I2C3 ((uint8_t)0x02) /* I2C3 Alternate Function mapping */
+#define GPIO_AF2_TIM1 ((uint8_t)0x02) /* TIM1 Alternate Function mapping */
+#define GPIO_AF2_TIM15 ((uint8_t)0x02) /* TIM15 Alternate Function mapping */
+#define GPIO_AF2_TIM2 ((uint8_t)0x02) /* TIM2 Alternate Function mapping */
+
+/**
+ * @brief AF 3 selection
+ */
+#define GPIO_AF3_TSC ((uint8_t)0x03) /* TSC Alternate Function mapping */
+#define GPIO_AF3_I2C3 ((uint8_t)0x03) /* I2C3 Alternate Function mapping */
+#define GPIO_AF3_TIM15 ((uint8_t)0x03) /* TIM15 Alternate Function mapping */
+
+/**
+ * @brief AF 4 selection
+ */
+#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */
+#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */
+#define GPIO_AF4_TIM1 ((uint8_t)0x04) /* TIM1 Alternate Function mapping */
+#define GPIO_AF4_TIM16 ((uint8_t)0x04) /* TIM16 Alternate Function mapping */
+#define GPIO_AF4_TIM17 ((uint8_t)0x04) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 5 selection
+ */
+#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */
+#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */
+#define GPIO_AF5_IR ((uint8_t)0x05) /* IR Alternate Function mapping */
+/**
+ * @brief AF 6 selection
+ */
+#define GPIO_AF6_TIM1 ((uint8_t)0x06) /* TIM1 Alternate Function mapping */
+#define GPIO_AF6_IR ((uint8_t)0x06) /* IR Alternate Function mapping */
+#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* SPI2/I2S2 Alternate Function mapping */
+#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */
+
+/**
+ * @brief AF 7 selection
+ */
+#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */
+#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */
+#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */
+#define GPIO_AF7_GPCOMP6 ((uint8_t)0x07) /* GPCOMP6 Alternate Function mapping */
+#define GPIO_AF7_CAN ((uint8_t)0x07) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 8 selection
+ */
+#define GPIO_AF8_I2C3 ((uint8_t)0x08) /* I2C3 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP2 ((uint8_t)0x08) /* GPCOMP2 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP4 ((uint8_t)0x08) /* GPCOMP4 Alternate Function mapping */
+#define GPIO_AF8_GPCOMP6 ((uint8_t)0x08) /* GPCOMP6 Alternate Function mapping */
+
+/**
+ * @brief AF 9 selection
+ */
+#define GPIO_AF9_TIM1 ((uint8_t)0x09) /* TIM1 Alternate Function mapping */
+#define GPIO_AF9_TIM15 ((uint8_t)0x09) /* TIM15 Alternate Function mapping */
+#define GPIO_AF9_CAN ((uint8_t)0x09) /* CAN Alternate Function mapping */
+
+/**
+ * @brief AF 10 selection
+ */
+#define GPIO_AF10_TIM2 ((uint8_t)0xA) /* TIM2 Alternate Function mapping */
+#define GPIO_AF10_TIM17 ((uint8_t)0xA) /* TIM17 Alternate Function mapping */
+
+/**
+ * @brief AF 11 selection
+ */
+#define GPIO_AF11_TIM1 ((uint8_t)0x0B) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 12 selection
+ */
+#define GPIO_AF12_TIM1 ((uint8_t)0x0C) /* TIM1 Alternate Function mapping */
+
+/**
+ * @brief AF 15 selection
+ */
+#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */
+
+#define IS_GPIO_AF(AF) (((AF) <= (uint8_t)0x0C) || ((AF) == (uint8_t)0x0F))
+/*------------------------------------------------------------------------------------------*/
+#endif /* STM32F302x8 */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_GPIO_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_hrtim.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,3589 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_hrtim.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of HRTIM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_HRTIM_H
+#define __STM32F3xx_HAL_HRTIM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F334x8)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HRTIM HRTIM HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @addtogroup HRTIM_Exported_Constants HRTIM Exported Constants
+ * @{
+ */
+/** @defgroup HRTIM_Max_Timer HRTIM Max Timer
+ * @{
+ */
+#define MAX_HRTIM_TIMER 6
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Exported_Types HRTIM Exported Types
+ * @{
+ */
+
+/**
+ * @brief HRTIM Configuration Structure definition - Time base related parameters
+ */
+typedef struct
+{
+ uint32_t HRTIMInterruptResquests; /*!< Specifies which interrupts requests must enabled for the HRTIM instance
+ This parameter can be any combination of @ref HRTIM_Common_Interrupt_Enable */
+ uint32_t SyncOptions; /*!< Specifies how the HRTIM instance handles the external synchronization signals
+ This parameter can be a combination of @ref HRTIM_Synchronization_Options */
+ uint32_t SyncInputSource; /*!< Specifies the external synchronization input source
+ This parameter can be a value of @ref HRTIM_Synchronization_Input_Source */
+ uint32_t SyncOutputSource; /*!< Specifies the source and event to be sent on the external synchronization outputs
+ This parameter can be a value of @ref HRTIM_Synchronization_Output_Source */
+ uint32_t SyncOutputPolarity; /*!< Specifies the conditionning of the event to be sent on the external synchronization outputs
+ This parameter can be a value of @ref HRTIM_Synchronization_Output_Polarity */
+} HRTIM_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_HRTIM_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_HRTIM_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_HRTIM_STATE_TIMEOUT = 0x06, /*!< Timeout state */
+ HAL_HRTIM_STATE_ERROR = 0x07, /*!< Error state */
+} HAL_HRTIM_StateTypeDef;
+
+/**
+ * @brief HRTIM Timer Structure definition
+ */
+typedef struct
+{
+ uint32_t CaptureTrigger1; /*!< Event(s) triggering capture unit 1 */
+ uint32_t CaptureTrigger2; /*!< Event(s) triggering capture unit 2 */
+ uint32_t InterruptRequests; /*!< Interrupts requests enabled for the timer */
+ uint32_t DMARequests; /*!< DMA requests enabled for the timer */
+ uint32_t DMASrcAddress; /*!< Address of the source address of the DMA transfer */
+ uint32_t DMADstAddress; /*!< Address of the destination address of the DMA transfer */
+ uint32_t DMASize; /*!< Ssize of the DMA transfer */
+} HRTIM_TimerParamTypeDef;
+
+/**
+ * @brief HRTIM Handle Structure definition
+ */
+typedef struct __HRTIM_HandleTypeDef
+{
+ HRTIM_TypeDef * Instance; /*!< Register base address */
+
+ HRTIM_InitTypeDef Init; /*!< HRTIM required parameters */
+
+ HRTIM_TimerParamTypeDef TimerParam[MAX_HRTIM_TIMER]; /*!< HRTIM timers - including the master - parameters */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ __IO HAL_HRTIM_StateTypeDef State; /*!< HRTIM communication state */
+
+ DMA_HandleTypeDef * hdmaMaster; /*!< Master timer DMA handle parameters */
+ DMA_HandleTypeDef * hdmaTimerA; /*!< Timer A DMA handle parameters */
+ DMA_HandleTypeDef * hdmaTimerB; /*!< Timer B DMA handle parameters */
+ DMA_HandleTypeDef * hdmaTimerC; /*!< Timer C DMA handle parameters */
+ DMA_HandleTypeDef * hdmaTimerD; /*!< Timer D DMA handle parameters */
+ DMA_HandleTypeDef * hdmaTimerE; /*!< Timer E DMA handle parameters */
+} HRTIM_HandleTypeDef;
+
+/**
+ * @brief Simple output compare mode configuration definition
+ */
+typedef struct {
+ uint32_t Period; /*!< Specifies the timer period
+ The period value must be above 3 periods of the fHRTIM clock.
+ Maximum value is = 0xFFDF */
+ uint32_t RepetitionCounter; /*!< Specifies the timer repetition period
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+ uint32_t PrescalerRatio; /*!< Specifies the timer clock prescaler ratio.
+ This parameter can be any value of @ref HRTIM_Prescaler_Ratio */
+ uint32_t Mode; /*!< Specifies the counter operating mode
+ This parameter can be any value of @ref HRTIM_Mode */
+} HRTIM_TimeBaseCfgTypeDef;
+
+/**
+ * @brief Simple output compare mode configuration definition
+ */
+typedef struct {
+ uint32_t Mode; /*!< Specifies the output compare mode (toggle, active, inactive)
+ This parameter can be any value of of @ref HRTIM_Simple_OC_Mode */
+ uint32_t Pulse; /*!< Specifies the compare value to be loaded into the Compare Register.
+ The compare value must be above or equal to 3 periods of the fHRTIM clock */
+ uint32_t Polarity; /*!< Specifies the output polarity
+ This parameter can be any value of @ref HRTIM_Output_Polarity */
+ uint32_t IdleLevel; /*!< Specifies whether the output level is active or inactive when in IDLE state
+ This parameter can be any value of @ref HRTIM_Output_IDLE_Level */
+} HRTIM_SimpleOCChannelCfgTypeDef;
+
+/**
+ * @brief Simple PWM output mode configuration definition
+ */
+typedef struct {
+ uint32_t Pulse; /*!< Specifies the compare value to be loaded into the Compare Register.
+ The compare value must be above or equal to 3 periods of the fHRTIM clock */
+ uint32_t Polarity; /*!< Specifies the output polarity
+ This parameter can be any value of @ref HRTIM_Output_Polarity */
+ uint32_t IdleLevel; /*!< Specifies whether the output level is active or inactive when in IDLE state
+ This parameter can be any value of @ref HRTIM_Output_IDLE_Level */
+} HRTIM_SimplePWMChannelCfgTypeDef;
+
+/**
+ * @brief Simple capture mode configuration definition
+ */
+typedef struct {
+ uint32_t Event; /*!< Specifies the external event triggering the capture
+ This parameter can be any 'EEVx' value of @ref HRTIM_External_Event_Channels */
+ uint32_t EventPolarity; /*!< Specifies the polarity of the external event (in case of level sensitivity)
+ This parameter can be a value of @ref HRTIM_External_Event_Polarity */
+ uint32_t EventSensitivity; /*!< Specifies the sensitivity of the external event
+ This parameter can be a value of @ref HRTIM_External_Event_Sensitivity */
+ uint32_t EventFilter; /*!< Defines the frequency used to sample the External Event and the length of the digital filter
+ This parameter can be a value of @ref HRTIM_External_Event_Filter */
+} HRTIM_SimpleCaptureChannelCfgTypeDef;
+
+/**
+ * @brief Simple One Pulse mode configuration definition
+ */
+typedef struct {
+ uint32_t Pulse; /*!< Specifies the compare value to be loaded into the Compare Register.
+ The compare value must be above or equal to 3 periods of the fHRTIM clock */
+ uint32_t OutputPolarity; /*!< Specifies the output polarity
+ This parameter can be any value of @ref HRTIM_Output_Polarity */
+ uint32_t OutputIdleLevel; /*!< Specifies whether the output level is active or inactive when in IDLE state
+ This parameter can be any value of @ref HRTIM_Output_IDLE_Level */
+ uint32_t Event; /*!< Specifies the external event triggering the pulse generation
+ This parameter can be any 'EEVx' value of @ref HRTIM_External_Event_Channels */
+ uint32_t EventPolarity; /*!< Specifies the polarity of the external event (in case of level sensitivity)
+ This parameter can be a value of @ref HRTIM_External_Event_Polarity */
+ uint32_t EventSensitivity; /*!< Specifies the sensitivity of the external event
+ This parameter can be a value of @ref HRTIM_External_Event_Sensitivity */
+ uint32_t EventFilter; /*!< Defines the frequency used to sample the External Event and the length of the digital filter
+ This parameter can be a value of @ref HRTIM_External_Event_Filter */
+} HRTIM_SimpleOnePulseChannelCfgTypeDef;
+
+/**
+ * @brief Timer configuration definition
+ */
+typedef struct {
+ uint32_t InterruptRequests; /*!< Relevant for all HRTIM timers, including the master
+ Specifies which interrupts requests must enabled for the timer
+ This parameter can be any combination of @ref HRTIM_Master_Interrupt_Enable
+ or HRTIM_Timing_Unit_Interrupt_Enable */
+ uint32_t DMARequests; /*!< Relevant for all HRTIM timers, including the master
+ Specifies which DMA requests must be enabled for the timer
+ This parameter can be any combination of @ref HRTIM_Master_DMA_Request_Enable
+ or HRTIM_Timing_Unit_DMA_Request_Enable */
+ uint32_t DMASrcAddress; /*!< Relevant for all HRTIM timers, including the master
+ Specifies the address of the source address of the DMA transfer */
+ uint32_t DMADstAddress; /*!< Relevant for all HRTIM timers, including the master
+ Specifies the address of the destination address of the DMA transfer */
+ uint32_t DMASize; /*!< Relevant for all HRTIM timers, including the master
+ Specifies the size of the DMA transfer */
+ uint32_t HalfModeEnable; /*!< Relevant for all HRTIM timers, including the master
+ Specifies whether or not hald mode is enabled
+ This parameter can be any value of @ref HRTIM_Half_Mode_Enable */
+ uint32_t StartOnSync; /*!< Relevant for all HRTIM timers, including the master
+ Specifies whether or not timer is reset by a rising edge on the synchronization input (when enabled)
+ This parameter can be any value of @ref HRTIM_Start_On_Sync_Input_Event */
+ uint32_t ResetOnSync; /*!< Relevant for all HRTIM timers, including the master
+ Specifies whether or not timer is reset by a rising edge on the synchronization input (when enabled)
+ This parameter can be any value of @ref HRTIM_Reset_On_Sync_Input_Event */
+ uint32_t DACSynchro; /*!< Relevant for all HRTIM timers, including the master
+ Indicates whether or not the a DAC synchronization event is generated
+ This parameter can be any value of @ref HRTIM_DAC_Synchronization */
+ uint32_t PreloadEnable; /*!< Relevant for all HRTIM timers, including the master
+ Specifies whether or not register preload is enabled
+ This parameter can be any value of @ref HRTIM_Register_Preload_Enable */
+ uint32_t UpdateGating; /*!< Relevant for all HRTIM timers, including the master
+ Specifies how the update occurs with respect to a burst DMA transaction or
+ update enable inputs (Slave timers only)
+ This parameter can be any value of @ref HRTIM_Update_Gating */
+ uint32_t BurstMode; /*!< Relevant for all HRTIM timers, including the master
+ Specifies how the timer behaves during a burst mode operation
+ This parameter can be any value of @ref HRTIM_Timer_Burst_Mode */
+ uint32_t RepetitionUpdate; /*!< Relevant for all HRTIM timers, including the master
+ Specifies whether or not registers update is triggered by the repetition event
+ This parameter can be any valuen of @ref HRTIM_Timer_Repetition_Update */
+ uint32_t PushPull; /*!< Relevant for Timer A to Timer E
+ Specifies whether or not the push-pull mode is enabled
+ This parameter can be any value of @ref HRTIM_Timer_Push_Pull_Mode */
+ uint32_t FaultEnable; /*!< Relevant for Timer A to Timer E
+ Specifies which fault channels are enabled for the timer
+ This parameter can be a combination of @ref HRTIM_Timer_Fault_Enabling */
+ uint32_t FaultLock; /*!< Relevant for Timer A to Timer E
+ Specifies whether or not fault enabling status is write protected
+ This parameter can be a value of @ref HRTIM_Timer_Fault_Lock */
+ uint32_t DeadTimeInsertion; /*!< Relevant for Timer A to Timer E
+ Specifies whether or not deadtime insertion is enabled for the timer
+ This parameter can be a value of @ref HRTIM_Timer_Deadtime_Insertion */
+ uint32_t DelayedProtectionMode; /*!< Relevant for Timer A to Timer E
+ Specifies the delayed protection mode
+ This parameter can be a value of @ref HRTIM_Timer_Delayed_Protection_Mode */
+ uint32_t UpdateTrigger; /*!< Relevant for Timer A to Timer E
+ Specifies source(s) triggering the timer registers update
+ This parameter can be a combination of @ref HRTIM_Timer_Update_Trigger */
+ uint32_t ResetTrigger; /*!< Relevant for Timer A to Timer E
+ Specifies source(s) triggering the timer counter reset
+ This parameter can be a combination of @ref HRTIM_Timer_Reset_Trigger */
+ uint32_t ResetUpdate; /*!< Relevant for Timer A to Timer E
+ Specifies whether or not registers update is triggered when the timer counter is reset
+ This parameter can be a value of @ref HRTIM_Timer_Reset_Update */
+} HRTIM_TimerCfgTypeDef;
+
+/**
+ * @brief Compare unit configuration definition
+ */
+typedef struct {
+ uint32_t CompareValue; /*!< Specifies the compare value of the timer compare unit
+ the minimum value must be greater than or equal to 3 periods of the fHRTIM clock
+ the maximum value must be less than or equal to 0xFFFF - 1 periods of the fHRTIM clock */
+ uint32_t AutoDelayedMode; /*!< Specifies the auto delayed mode for compare unit 2 or 4
+ This parameter can be a value of @ref HRTIM_Compare_Unit_Auto_Delayed_Mode */
+ uint32_t AutoDelayedTimeout; /*!< Specifies compare value for timing unit 1 or 3 when auto delayed mode with time out is selected
+ CompareValue + AutoDelayedTimeout must be less than 0xFFFF */
+} HRTIM_CompareCfgTypeDef;
+
+/**
+ * @brief Capture unit configuration definition
+ */
+typedef struct {
+ uint32_t Trigger; /*!< Specifies source(s) triggering the capture
+ This parameter can be a combination of @ref HRTIM_Capture_Unit_Trigger */
+} HRTIM_CaptureCfgTypeDef;
+
+/**
+ * @brief Output configuration definition
+ */
+typedef struct {
+ uint32_t Polarity; /*!< Specifies the output polarity
+ This parameter can be any value of @ref HRTIM_Output_Polarity */
+ uint32_t SetSource; /*!< Specifies the event(s) transitioning the output from its inactive level to its active level
+ This parameter can be a combination of @ref HRTIM_Output_Set_Source */
+ uint32_t ResetSource; /*!< Specifies the event(s) transitioning the output from its active level to its inactive level
+ This parameter can be a combination of @ref HRTIM_Output_Reset_Source */
+ uint32_t IdleMode; /*!< Specifies whether or not the output is affected by a burst mode operation
+ This parameter can be any value of @ref HRTIM_Output_Idle_Mode */
+ uint32_t IdleLevel; /*!< Specifies whether the output level is active or inactive when in IDLE state
+ This parameter can be any value of @ref HRTIM_Output_IDLE_Level */
+ uint32_t FaultLevel; /*!< Specifies whether the output level is active or inactive when in FAULT state
+ This parameter can be any value of @ref HRTIM_Output_FAULT_Level */
+ uint32_t ChopperModeEnable; /*!< Indicates whether or not the chopper mode is enabled
+ This parameter can be any value of @ref HRTIM_Output_Chopper_Mode_Enable */
+ uint32_t BurstModeEntryDelayed; /* !<Indicates whether or not deadtime is inserted when entering the IDLE state
+ during a burst mode operation
+ This parameters can be any value of @ref HRTIM_Output_Burst_Mode_Entry_Delayed */
+} HRTIM_OutputCfgTypeDef;
+
+/**
+ * @brief External event filtering in timing units configuration definition
+ */
+typedef struct {
+ uint32_t Filter; /*!< Specifies the type of event filtering within the timing unit
+ This parameter can be a value of @ref HRTIM_Timer_External_Event_Filter */
+ uint32_t Latch; /*!< Specifies whether or not the signal is latched
+ This parameter can be a value of @ref HRTIM_Timer_External_Event_Latch */
+} HRTIM_TimerEventFilteringCfgTypeDef;
+
+/**
+ * @brief Dead time feature configuration definition
+ */
+typedef struct {
+ uint32_t Prescaler; /*!< Specifies the Deadtime Prescaler
+ This parameter can be a value of @ref HRTIM_Deadtime_Prescaler_Ratio */
+ uint32_t RisingValue; /*!< Specifies the Deadtime following a rising edge
+ This parameter can be a number between 0x0 and 0x1FF */
+ uint32_t RisingSign; /*!< Specifies whether the deadtime is positive or negative on rising edge
+ This parameter can be a value of @ref HRTIM_Deadtime_Rising_Sign */
+ uint32_t RisingLock; /*!< Specifies whether or not deadtime rising settings (value and sign) are write protected
+ This parameter can be a value of @ref HRTIM_Deadtime_Rising_Lock */
+ uint32_t RisingSignLock; /*!< Specifies whether or not deadtime rising sign is write protected
+ This parameter can be a value of @ref HRTIM_Deadtime_Rising_Sign_Lock */
+ uint32_t FallingValue; /*!< Specifies the Deadtime following a falling edge
+ This parameter can be a number between 0x0 and 0x1FF */
+ uint32_t FallingSign; /*!< Specifies whether the deadtime is positive or negative on falling edge
+ This parameter can be a value of @ref HRTIM_Deadtime_Falling_Sign */
+ uint32_t FallingLock; /*!< Specifies whether or not deadtime falling settings (value and sign) are write protected
+ This parameter can be a value of @ref HRTIM_Deadtime_Falling_Lock */
+ uint32_t FallingSignLock; /*!< Specifies whether or not deadtime falling sign is write protected
+ This parameter can be a value of @ref HRTIM_Deadtime_Falling_Sign_Lock */
+} HRTIM_DeadTimeCfgTypeDef ;
+
+/**
+ * @brief Chopper mode configuration definition
+ */
+typedef struct {
+ uint32_t CarrierFreq; /*!< Specifies the Timer carrier frequency value.
+ This parameter can be a value of @ref HRTIM_Chopper_Frequency */
+ uint32_t DutyCycle; /*!< Specifies the Timer chopper duty cycle value.
+ This parameter can be a value of @ref HRTIM_Chopper_Duty_Cycle */
+ uint32_t StartPulse; /*!< Specifies the Timer pulse width value.
+ This parameter can be a value of @ref HRTIM_Chopper_Start_Pulse_Width */
+} HRTIM_ChopperModeCfgTypeDef;
+
+/**
+ * @brief External event channel configuration definition
+ */
+typedef struct {
+ uint32_t Source; /*!< Identifies the source of the external event
+ This parameter can be a value of @ref HRTIM_External_Event_Sources */
+ uint32_t Polarity; /*!< Specifies the polarity of the external event (in case of level sensitivity)
+ This parameter can be a value of @ref HRTIM_External_Event_Polarity */
+ uint32_t Sensitivity; /*!< Specifies the sensitivity of the external event
+ This parameter can be a value of @ref HRTIM_External_Event_Sensitivity */
+ uint32_t Filter; /*!< Defines the frequency used to sample the External Event and the length of the digital filter
+ This parameter can be a value of @ref HRTIM_External_Event_Filter */
+ uint32_t FastMode; /*!< Indicates whether or not low latency mode is enabled for the external event
+ This parameter can be a value of @ref HRTIM_External_Event_Fast_Mode */
+} HRTIM_EventCfgTypeDef;
+
+/**
+ * @brief Fault channel configuration definition
+ */
+typedef struct {
+ uint32_t Source; /*!< Identifies the source of the fault
+ This parameter can be a value of @ref HRTIM_Fault_Sources */
+ uint32_t Polarity; /*!< Specifies the polarity of the fault event
+ This parameter can be a value of @ref HRTIM_Fault_Polarity */
+ uint32_t Filter; /*!< Defines the frequency used to sample the Fault input and the length of the digital filter
+ This parameter can be a value of @ref HRTIM_Fault_Filter */
+ uint32_t Lock; /*!< Indicates whether or not fault programming bits are write protected
+ This parameter can be a value of @ref HRTIM_Fault_Lock */
+} HRTIM_FaultCfgTypeDef;
+
+/**
+ * @brief Burst mode configuration definition
+ */
+typedef struct {
+ uint32_t Mode; /*!< Specifies the burst mode operating mode
+ This parameter can be a value of @ref HRTIM_Burst_Mode_Operating_Mode */
+ uint32_t ClockSource; /*!< Specifies the burst mode clock source
+ This parameter can be a value of @ref HRTIM_Burst_Mode_Clock_Source */
+ uint32_t Prescaler; /*!< Specifies the burst mode prescaler
+ This parameter can be a value of @ref HRTIM_Burst_Mode_Prescaler */
+ uint32_t PreloadEnable; /*!< Specifies whether or not preload is enabled for burst mode related registers (HRTIM_BMCMPR and HRTIM_BMPER)
+ This parameter can be a combination of @ref HRTIM_Burst_Mode_Register_Preload_Enable */
+ uint32_t Trigger; /*!< Specifies the event(s) trigering the burst operation
+ This parameter can be a combination of @ref HRTIM_Burst_Mode_Trigger */
+ uint32_t IdleDuration; /*!< Specifies number of periods during which the selected timers are in idle state
+ This parameter can be a number between 0x0 and 0xFFFF */
+ uint32_t Period; /*!< Specifies burst mode repetition period
+ This parameter can be a number between 0x1 and 0xFFFF */
+} HRTIM_BurstModeCfgTypeDef;
+
+/**
+ * @brief ADC trigger configuration definition
+ */
+typedef struct {
+ uint32_t UpdateSource; /*!< Specifies the ADC trigger update source
+ This parameter can be a combination of @ref HRTIM_ADC_Trigger_Update_Source */
+ uint32_t Trigger; /*!< Specifies the event(s) triggering the ADC conversion
+ This parameter can be a value of @ref HRTIM_ADC_Trigger_Event */
+} HRTIM_ADCTriggerCfgTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup HRTIM_Exported_Constants HRTIM Exported Constants
+ * @{
+ */
+
+/** @defgroup HRTIM_Timer_Index HRTIM Timer Index
+ * @{
+ * @brief Constants defining the timer indexes
+ */
+#define HRTIM_TIMERINDEX_TIMER_A (uint32_t)0x0 /*!< Index used to access timer A registers */
+#define HRTIM_TIMERINDEX_TIMER_B (uint32_t)0x1 /*!< Index used to access timer B registers */
+#define HRTIM_TIMERINDEX_TIMER_C (uint32_t)0x2 /*!< Index used to access timer C registers */
+#define HRTIM_TIMERINDEX_TIMER_D (uint32_t)0x3 /*!< Index used to access timer D registers */
+#define HRTIM_TIMERINDEX_TIMER_E (uint32_t)0x4 /*!< Index used to access timer E registers */
+#define HRTIM_TIMERINDEX_MASTER (uint32_t)0x5 /*!< Index used to access master registers */
+#define HRTIM_TIMERINDEX_COMMON (uint32_t)0xFF /*!< Index used to access HRTIM common registers */
+
+#define IS_HRTIM_TIMERINDEX(TIMERINDEX)\
+ (((TIMERINDEX) == HRTIM_TIMERINDEX_MASTER) || \
+ ((TIMERINDEX) == HRTIM_TIMERINDEX_TIMER_A) || \
+ ((TIMERINDEX) == HRTIM_TIMERINDEX_TIMER_B) || \
+ ((TIMERINDEX) == HRTIM_TIMERINDEX_TIMER_C) || \
+ ((TIMERINDEX) == HRTIM_TIMERINDEX_TIMER_D) || \
+ ((TIMERINDEX) == HRTIM_TIMERINDEX_TIMER_E))
+
+#define IS_HRTIM_TIMING_UNIT(TIMERINDEX)\
+ (((TIMERINDEX) == HRTIM_TIMERINDEX_TIMER_A) || \
+ ((TIMERINDEX) == HRTIM_TIMERINDEX_TIMER_B) || \
+ ((TIMERINDEX) == HRTIM_TIMERINDEX_TIMER_C) || \
+ ((TIMERINDEX) == HRTIM_TIMERINDEX_TIMER_D) || \
+ ((TIMERINDEX) == HRTIM_TIMERINDEX_TIMER_E))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timer_identifier HRTIM Timer identifier
+ * @{
+ * @brief Constants defining timer identifiers
+ */
+#define HRTIM_TIMERID_MASTER (HRTIM_MCR_MCEN) /*!< Master identifier*/
+#define HRTIM_TIMERID_TIMER_A (HRTIM_MCR_TACEN) /*!< Timer A identifier */
+#define HRTIM_TIMERID_TIMER_B (HRTIM_MCR_TBCEN) /*!< Timer B identifier */
+#define HRTIM_TIMERID_TIMER_C (HRTIM_MCR_TCCEN) /*!< Timer C identifier */
+#define HRTIM_TIMERID_TIMER_D (HRTIM_MCR_TDCEN) /*!< Timer D identifier */
+#define HRTIM_TIMERID_TIMER_E (HRTIM_MCR_TECEN) /*!< Timer E identifier */
+
+#define IS_HRTIM_TIMERID(TIMERID) (((TIMERID) & 0xFFC0FFFF) == 0x00000000)
+
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Compare_Unit HRTIM Compare Unit
+ * @{
+ * @brief Constants defining compare unit identifiers
+ */
+#define HRTIM_COMPAREUNIT_1 (uint32_t)0x00000001 /*!< Compare unit 1 identifier */
+#define HRTIM_COMPAREUNIT_2 (uint32_t)0x00000002 /*!< Compare unit 2 identifier */
+#define HRTIM_COMPAREUNIT_3 (uint32_t)0x00000004 /*!< Compare unit 3 identifier */
+#define HRTIM_COMPAREUNIT_4 (uint32_t)0x00000008 /*!< Compare unit 4 identifier */
+
+#define IS_HRTIM_COMPAREUNIT(COMPAREUNIT)\
+ (((COMPAREUNIT) == HRTIM_COMPAREUNIT_1) || \
+ ((COMPAREUNIT) == HRTIM_COMPAREUNIT_2) || \
+ ((COMPAREUNIT) == HRTIM_COMPAREUNIT_3) || \
+ ((COMPAREUNIT) == HRTIM_COMPAREUNIT_4))
+ /**
+ * @}
+ */
+
+/** @defgroup HRTIM_Capture_Unit HRTIM Capture Unit
+ * @{
+ * @brief Constants defining capture unit identifiers
+ */
+#define HRTIM_CAPTUREUNIT_1 (uint32_t)0x00000001 /*!< Capture unit 1 identifier */
+#define HRTIM_CAPTUREUNIT_2 (uint32_t)0x00000002 /*!< Capture unit 2 identifier */
+
+#define IS_HRTIM_CAPTUREUNIT(CAPTUREUNIT)\
+ (((CAPTUREUNIT) == HRTIM_CAPTUREUNIT_1) || \
+ ((CAPTUREUNIT) == HRTIM_CAPTUREUNIT_2))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timer_Output HRTIM Timer Output
+ * @{
+ * @brief Constants defining timer output identifiers
+ */
+#define HRTIM_OUTPUT_TA1 (uint32_t)0x00000001 /*!< Timer A - Ouput 1 identifier */
+#define HRTIM_OUTPUT_TA2 (uint32_t)0x00000002 /*!< Timer A - Ouput 2 identifier */
+#define HRTIM_OUTPUT_TB1 (uint32_t)0x00000004 /*!< Timer B - Ouput 1 identifier */
+#define HRTIM_OUTPUT_TB2 (uint32_t)0x00000008 /*!< Timer B - Ouput 2 identifier */
+#define HRTIM_OUTPUT_TC1 (uint32_t)0x00000010 /*!< Timer C - Ouput 1 identifier */
+#define HRTIM_OUTPUT_TC2 (uint32_t)0x00000020 /*!< Timer C - Ouput 2 identifier */
+#define HRTIM_OUTPUT_TD1 (uint32_t)0x00000040 /*!< Timer D - Ouput 1 identifier */
+#define HRTIM_OUTPUT_TD2 (uint32_t)0x00000080 /*!< Timer D - Ouput 2 identifier */
+#define HRTIM_OUTPUT_TE1 (uint32_t)0x00000100 /*!< Timer E - Ouput 1 identifier */
+#define HRTIM_OUTPUT_TE2 (uint32_t)0x00000200 /*!< Timer E - Ouput 2 identifier */
+
+#define IS_HRTIM_OUTPUT(OUTPUT) (((OUTPUT) & 0xFFFFFC00) == 0x00000000)
+
+#define IS_HRTIM_TIMER_OUTPUT(TIMER, OUTPUT)\
+ ((((TIMER) == HRTIM_TIMERINDEX_TIMER_A) && \
+ (((OUTPUT) == HRTIM_OUTPUT_TA1) || \
+ ((OUTPUT) == HRTIM_OUTPUT_TA2))) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_B) && \
+ (((OUTPUT) == HRTIM_OUTPUT_TB1) || \
+ ((OUTPUT) == HRTIM_OUTPUT_TB2))) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_C) && \
+ (((OUTPUT) == HRTIM_OUTPUT_TC1) || \
+ ((OUTPUT) == HRTIM_OUTPUT_TC2))) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_D) && \
+ (((OUTPUT) == HRTIM_OUTPUT_TD1) || \
+ ((OUTPUT) == HRTIM_OUTPUT_TD2))) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_E) && \
+ (((OUTPUT) == HRTIM_OUTPUT_TE1) || \
+ ((OUTPUT) == HRTIM_OUTPUT_TE2))))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_ADC_Trigger HRTIM ADC Trigger
+ * @{
+ * @brief Constants defining ADC triggers identifiers
+ */
+#define HRTIM_ADCTRIGGER_1 (uint32_t)0x00000001 /*!< ADC trigger 1 identifier */
+#define HRTIM_ADCTRIGGER_2 (uint32_t)0x00000002 /*!< ADC trigger 2 identifier */
+#define HRTIM_ADCTRIGGER_3 (uint32_t)0x00000004 /*!< ADC trigger 3 identifier */
+#define HRTIM_ADCTRIGGER_4 (uint32_t)0x00000008 /*!< ADC trigger 4 identifier */
+
+#define IS_HRTIM_ADCTRIGGER(ADCTRIGGER)\
+ (((ADCTRIGGER) == HRTIM_ADCTRIGGER_1) || \
+ ((ADCTRIGGER) == HRTIM_ADCTRIGGER_2) || \
+ ((ADCTRIGGER) == HRTIM_ADCTRIGGER_3) || \
+ ((ADCTRIGGER) == HRTIM_ADCTRIGGER_4))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_External_Event_Channels HRTIM External Event Channels
+ * @{
+ * @brief Constants defining external event channel identifiers
+ */
+#define HRTIM_EVENT_NONE ((uint32_t)0x00000000) /*!< Undefined event channel */
+#define HRTIM_EVENT_1 ((uint32_t)0x00000001) /*!< External event channel 1 identifier */
+#define HRTIM_EVENT_2 ((uint32_t)0x00000002) /*!< External event channel 2 identifier */
+#define HRTIM_EVENT_3 ((uint32_t)0x00000004) /*!< External event channel 3 identifier */
+#define HRTIM_EVENT_4 ((uint32_t)0x00000008) /*!< External event channel 4 identifier */
+#define HRTIM_EVENT_5 ((uint32_t)0x00000010) /*!< External event channel 5 identifier */
+#define HRTIM_EVENT_6 ((uint32_t)0x00000020) /*!< External event channel 6 identifier */
+#define HRTIM_EVENT_7 ((uint32_t)0x00000040) /*!< External event channel 7 identifier */
+#define HRTIM_EVENT_8 ((uint32_t)0x00000080) /*!< External event channel 8 identifier */
+#define HRTIM_EVENT_9 ((uint32_t)0x00000100) /*!< External event channel 9 identifier */
+#define HRTIM_EVENT_10 ((uint32_t)0x00000200) /*!< External event channel 10 identifier */
+
+#define IS_HRTIM_EVENT(EVENT)\
+ (((EVENT) == HRTIM_EVENT_1) || \
+ ((EVENT) == HRTIM_EVENT_2) || \
+ ((EVENT) == HRTIM_EVENT_3) || \
+ ((EVENT) == HRTIM_EVENT_4) || \
+ ((EVENT) == HRTIM_EVENT_5) || \
+ ((EVENT) == HRTIM_EVENT_6) || \
+ ((EVENT) == HRTIM_EVENT_7) || \
+ ((EVENT) == HRTIM_EVENT_8) || \
+ ((EVENT) == HRTIM_EVENT_9) || \
+ ((EVENT) == HRTIM_EVENT_10))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Fault_Channel HRTIM Fault Channel
+ * @{
+ * @brief Constants defining fault channel identifiers
+ */
+#define HRTIM_FAULT_1 ((uint32_t)0x01) /*!< Fault channel 1 identifier */
+#define HRTIM_FAULT_2 ((uint32_t)0x02) /*!< Fault channel 2 identifier */
+#define HRTIM_FAULT_3 ((uint32_t)0x04) /*!< Fault channel 3 identifier */
+#define HRTIM_FAULT_4 ((uint32_t)0x08) /*!< Fault channel 4 identifier */
+#define HRTIM_FAULT_5 ((uint32_t)0x10) /*!< Fault channel 5 identifier */
+
+#define IS_HRTIM_FAULT(FAULT)\
+ (((FAULT) == HRTIM_FAULT_1) || \
+ ((FAULT) == HRTIM_FAULT_2) || \
+ ((FAULT) == HRTIM_FAULT_3) || \
+ ((FAULT) == HRTIM_FAULT_4) || \
+ ((FAULT) == HRTIM_FAULT_5))
+/**
+ * @}
+ */
+
+
+ /** @defgroup HRTIM_Prescaler_Ratio HRTIM Prescaler Ratio
+ * @{
+ * @brief Constants defining timer high-resolution clock prescaler ratio.
+ */
+#define HRTIM_PRESCALERRATIO_MUL32 ((uint32_t)0x00000000) /*!< fHRCK: 4.608 GHz - Resolution: 217 ps - Min PWM frequency: 70.3 kHz (fHRTIM=144MHz) */
+#define HRTIM_PRESCALERRATIO_MUL16 ((uint32_t)0x00000001) /*!< fHRCK: 2.304 GHz - Resolution: 434 ps - Min PWM frequency: 35.1 KHz (fHRTIM=144MHz) */
+#define HRTIM_PRESCALERRATIO_MUL8 ((uint32_t)0x00000002) /*!< fHRCK: 1.152 GHz - Resolution: 868 ps - Min PWM frequency: 17.6 kHz (fHRTIM=144MHz) */
+#define HRTIM_PRESCALERRATIO_MUL4 ((uint32_t)0x00000003) /*!< fHRCK: 576 MHz - Resolution: 1.73 ns - Min PWM frequency: 8.8 kHz (fHRTIM=144MHz) */
+#define HRTIM_PRESCALERRATIO_MUL2 ((uint32_t)0x00000004) /*!< fHRCK: 288 MHz - Resolution: 3.47 ns - Min PWM frequency: 4.4 kHz (fHRTIM=144MHz) */
+#define HRTIM_PRESCALERRATIO_DIV1 ((uint32_t)0x00000005) /*!< fHRCK: 144 MHz - Resolution: 6.95 ns - Min PWM frequency: 2.2 kHz (fHRTIM=144MHz) */
+#define HRTIM_PRESCALERRATIO_DIV2 ((uint32_t)0x00000006) /*!< fHRCK: 72 MHz - Resolution: 13.88 ns- Min PWM frequency: 1.1 kHz (fHRTIM=144MHz) */
+#define HRTIM_PRESCALERRATIO_DIV4 ((uint32_t)0x00000007) /*!< fHRCK: 36 MHz - Resolution: 27.7 ns- Min PWM frequency: 550Hz (fHRTIM=144MHz) */
+
+#define IS_HRTIM_PRESCALERRATIO(PRESCALERRATIO)\
+ (((PRESCALERRATIO) == HRTIM_PRESCALERRATIO_MUL32) || \
+ ((PRESCALERRATIO) == HRTIM_PRESCALERRATIO_MUL16) || \
+ ((PRESCALERRATIO) == HRTIM_PRESCALERRATIO_MUL8) || \
+ ((PRESCALERRATIO) == HRTIM_PRESCALERRATIO_MUL4) || \
+ ((PRESCALERRATIO) == HRTIM_PRESCALERRATIO_MUL2) || \
+ ((PRESCALERRATIO) == HRTIM_PRESCALERRATIO_DIV1) || \
+ ((PRESCALERRATIO) == HRTIM_PRESCALERRATIO_DIV2) || \
+ ((PRESCALERRATIO) == HRTIM_PRESCALERRATIO_DIV4))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Mode HRTIM Mode
+ * @{
+ * @brief Constants defining timer counter operating mode.
+ */
+#define HRTIM_MODE_CONTINUOUS ((uint32_t)0x00000008) /*!< The timer operates in continuous (free-running) mode */
+#define HRTIM_MODE_SINGLESHOT ((uint32_t)0x00000000) /*!< The timer operates in non retriggerable single-shot mode */
+#define HRTIM_MODE_SINGLESHOT_RETRIGGERABLE ((uint32_t)0x00000010) /*!< The timer operates in retriggerable single-shot mode */
+
+#define IS_HRTIM_MODE(MODE)\
+ (((MODE) == HRTIM_MODE_CONTINUOUS) || \
+ ((MODE) == HRTIM_MODE_SINGLESHOT) || \
+ ((MODE) == HRTIM_MODE_SINGLESHOT_RETRIGGERABLE))
+
+#define IS_HRTIM_MODE_ONEPULSE(MODE)\
+ (((MODE) == HRTIM_MODE_SINGLESHOT) || \
+ ((MODE) == HRTIM_MODE_SINGLESHOT_RETRIGGERABLE))
+
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Half_Mode_Enable HRTIM Half Mode Enable
+ * @{
+ * @brief Constants defining half mode enabling status.
+ */
+#define HRTIM_HALFMODE_DISABLED ((uint32_t)0x00000000) /*!< Half mode is disabled */
+#define HRTIM_HALFMODE_ENABLED ((uint32_t)0x00000020) /*!< Half mode is enabled */
+
+#define IS_HRTIM_HALFMODE(HALFMODE)\
+ (((HALFMODE) == HRTIM_HALFMODE_DISABLED) || \
+ ((HALFMODE) == HRTIM_HALFMODE_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Start_On_Sync_Input_Event HRTIM Start On Sync Input Event
+ * @{
+ * @brief Constants defining the timer behavior following the synchronization event
+ */
+#define HRTIM_SYNCSTART_DISABLED ((uint32_t)0x00000000) /*!< Synchronization input event has effect on the timer */
+#define HRTIM_SYNCSTART_ENABLED (HRTIM_MCR_SYNCSTRTM) /*!< Synchronization input event starts the timer */
+
+#define IS_HRTIM_SYNCSTART(SYNCSTART)\
+ (((SYNCSTART) == HRTIM_SYNCSTART_DISABLED) || \
+ ((SYNCSTART) == HRTIM_SYNCSTART_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Reset_On_Sync_Input_Event HRTIM Reset On Sync Input Event
+ * @{
+ * @brief Constants defining the timer behavior following the synchronization event
+ */
+#define HRTIM_SYNCRESET_DISABLED ((uint32_t)0x00000000) /*!< Synchronization input event has effect on the timer */
+#define HRTIM_SYNCRESET_ENABLED (HRTIM_MCR_SYNCRSTM) /*!< Synchronization input event resets the timer */
+
+#define IS_HRTIM_SYNCRESET(SYNCRESET)\
+ (((SYNCRESET) == HRTIM_SYNCRESET_DISABLED) || \
+ ((SYNCRESET) == HRTIM_SYNCRESET_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_DAC_Synchronization HRTIM DAC Synchronization
+ * @{
+ * @brief Constants defining on which output the DAC synchronization event is sent
+ */
+#define HRTIM_DACSYNC_NONE (uint32_t)0x00000000 /*!< No DAC synchronization event generated */
+#define HRTIM_DACSYNC_DACTRIGOUT_1 (HRTIM_MCR_DACSYNC_0) /*!< DAC synchronization event generated on DACTrigOut1 output upon timer update */
+#define HRTIM_DACSYNC_DACTRIGOUT_2 (HRTIM_MCR_DACSYNC_1) /*!< DAC synchronization event generated on DACTrigOut2 output upon timer update */
+#define HRTIM_DACSYNC_DACTRIGOUT_3 (HRTIM_MCR_DACSYNC_1 | HRTIM_MCR_DACSYNC_0) /*!< DAC update generated on DACTrigOut3 output upon timer update */
+
+#define IS_HHRTIM_DACSYNC(DACSYNC)\
+ (((DACSYNC) == HRTIM_DACSYNC_NONE) || \
+ ((DACSYNC) == HRTIM_DACSYNC_DACTRIGOUT_1) || \
+ ((DACSYNC) == HRTIM_DACSYNC_DACTRIGOUT_2) || \
+ ((DACSYNC) == HRTIM_DACSYNC_DACTRIGOUT_3))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Register_Preload_Enable HRTIM Register Preload Enable
+ * @{
+ * @brief Constants defining whether a write access into a preloadable
+ * register is done into the active or the preload register.
+ */
+#define HRTIM_PRELOAD_DISABLED ((uint32_t)0x00000000) /*!< Preload disabled: the write access is directly done into the active register */
+#define HRTIM_PRELOAD_ENABLED (HRTIM_MCR_PREEN) /*!< Preload enabled: the write access is done into the preload register */
+
+#define IS_HRTIM_PRELOAD(PRELOAD)\
+ (((PRELOAD) == HRTIM_PRELOAD_DISABLED) || \
+ ((PRELOAD) == HRTIM_PRELOAD_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Update_Gating HRTIM Update Gating
+ * @{
+ * @brief Constants defining how the update occurs relatively to the burst DMA
+ * transaction and the external update request on update enable inputs 1 to 3.
+ */
+#define HRTIM_UPDATEGATING_INDEPENDENT (uint32_t)0x00000000 /*!< Update done independently from the DMA burst transfer completion */
+#define HRTIM_UPDATEGATING_DMABURST (HRTIM_TIMCR_UPDGAT_0) /*!< Update done when the DMA burst transfer is completed */
+#define HRTIM_UPDATEGATING_DMABURST_UPDATE (HRTIM_TIMCR_UPDGAT_1) /*!< Update done on timer roll-over following a DMA burst transfer completion*/
+#define HRTIM_UPDATEGATING_UPDEN1 (HRTIM_TIMCR_UPDGAT_1 | HRTIM_TIMCR_UPDGAT_0) /*!< Slave timer only - Update done on a rising edge of HRTIM update enable input 1 */
+#define HRTIM_UPDATEGATING_UPDEN2 (HRTIM_TIMCR_UPDGAT_2) /*!< Slave timer only - Update done on a rising edge of HRTIM update enable input 2 */
+#define HRTIM_UPDATEGATING_UPDEN3 (HRTIM_TIMCR_UPDGAT_2 | HRTIM_TIMCR_UPDGAT_0) /*!< Slave timer only - Update done on a rising edge of HRTIM update enable input 3 */
+#define HRTIM_UPDATEGATING_UPDEN1_UPDATE (HRTIM_TIMCR_UPDGAT_2 | HRTIM_TIMCR_UPDGAT_1) /*!< Slave timer only - Update done on the update event following a rising edge of HRTIM update enable input 1 */
+#define HRTIM_UPDATEGATING_UPDEN2_UPDATE (HRTIM_TIMCR_UPDGAT_2 | HRTIM_TIMCR_UPDGAT_1 | HRTIM_TIMCR_UPDGAT_0) /*!< Slave timer only - Update done on the update event following a rising edge of HRTIM update enable input 2 */
+#define HRTIM_UPDATEGATING_UPDEN3_UPDATE (HRTIM_TIMCR_UPDGAT_3) /*!< Slave timer only - Update done on the update event following a rising edge of HRTIM update enable input 3 */
+
+#define IS_HRTIM_UPDATEGATING_MASTER(UPDATEGATING)\
+ (((UPDATEGATING) == HRTIM_UPDATEGATING_INDEPENDENT) || \
+ ((UPDATEGATING) == HRTIM_UPDATEGATING_DMABURST) || \
+ ((UPDATEGATING) == HRTIM_UPDATEGATING_DMABURST_UPDATE))
+
+#define IS_HRTIM_UPDATEGATING_TIM(UPDATEGATING)\
+ (((UPDATEGATING) == HRTIM_UPDATEGATING_INDEPENDENT) || \
+ ((UPDATEGATING) == HRTIM_UPDATEGATING_DMABURST) || \
+ ((UPDATEGATING) == HRTIM_UPDATEGATING_DMABURST_UPDATE) || \
+ ((UPDATEGATING) == HRTIM_UPDATEGATING_UPDEN1) || \
+ ((UPDATEGATING) == HRTIM_UPDATEGATING_UPDEN2) || \
+ ((UPDATEGATING) == HRTIM_UPDATEGATING_UPDEN3) || \
+ ((UPDATEGATING) == HRTIM_UPDATEGATING_UPDEN1_UPDATE) || \
+ ((UPDATEGATING) == HRTIM_UPDATEGATING_UPDEN2_UPDATE) || \
+ ((UPDATEGATING) == HRTIM_UPDATEGATING_UPDEN3_UPDATE))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timer_Burst_Mode HRTIM Timer Burst Mode
+ * @{
+ * @brief Constants defining how the timer behaves during a burst
+ mode operation.
+ */
+#define HRTIM_TIMERBURSTMODE_MAINTAINCLOCK (uint32_t)0x000000 /*!< Timer counter clock is maintained and the timer operates normally */
+#define HRTIM_TIMERBURSTMODE_RESETCOUNTER (HRTIM_BMCR_MTBM) /*!< Timer counter clock is stopped and the counter is reset */
+
+#define IS_HRTIM_TIMERBURSTMODE(TIMERBURSTMODE) \
+ (((TIMERBURSTMODE) == HRTIM_TIMERBURSTMODE_MAINTAINCLOCK) || \
+ ((TIMERBURSTMODE) == HRTIM_TIMERBURSTMODE_RESETCOUNTER))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timer_Repetition_Update HRTIM Timer Repetition Update
+ * @{
+ * @brief Constants defining whether registers are updated when the timer
+ * repetition period is completed (either due to roll-over or
+ * reset events)
+ */
+#define HRTIM_UPDATEONREPETITION_DISABLED (uint32_t)0x00000000 /*!< Update on repetition disabled */
+#define HRTIM_UPDATEONREPETITION_ENABLED (HRTIM_MCR_MREPU) /*!< Update on repetition enabled */
+
+#define IS_HRTIM_UPDATEONREPETITION(UPDATEONREPETITION) \
+ (((UPDATEONREPETITION) == HRTIM_UPDATEONREPETITION_DISABLED) || \
+ ((UPDATEONREPETITION) == HRTIM_UPDATEONREPETITION_ENABLED))
+/**
+ * @}
+ */
+
+
+/** @defgroup HRTIM_Timer_Push_Pull_Mode HRTIM Timer Push Pull Mode
+ * @{
+ * @brief Constants defining whether or not the puhs-pull mode is enabled for
+ * a timer.
+ */
+#define HRTIM_TIMPUSHPULLMODE_DISABLED ((uint32_t)0x00000000) /*!< Push-Pull mode disabled */
+#define HRTIM_TIMPUSHPULLMODE_ENABLED ((uint32_t)HRTIM_TIMCR_PSHPLL) /*!< Push-Pull mode enabled */
+
+#define IS_HRTIM_TIMPUSHPULLMODE(TIMPUSHPULLMODE)\
+ (((TIMPUSHPULLMODE) == HRTIM_TIMPUSHPULLMODE_DISABLED) || \
+ ((TIMPUSHPULLMODE) == HRTIM_TIMPUSHPULLMODE_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timer_Fault_Enabling HRTIM Timer Fault Enabling
+ * @{
+ * @brief Constants defining whether a faut channel is enabled for a timer
+ */
+#define HRTIM_TIMFAULTENABLE_NONE (uint32_t)0x00000000 /*!< No fault enabled */
+#define HRTIM_TIMFAULTENABLE_FAULT1 (HRTIM_FLTR_FLT1EN) /*!< Fault 1 enabled */
+#define HRTIM_TIMFAULTENABLE_FAULT2 (HRTIM_FLTR_FLT2EN) /*!< Fault 2 enabled */
+#define HRTIM_TIMFAULTENABLE_FAULT3 (HRTIM_FLTR_FLT3EN) /*!< Fault 3 enabled */
+#define HRTIM_TIMFAULTENABLE_FAULT4 (HRTIM_FLTR_FLT4EN) /*!< Fault 4 enabled */
+#define HRTIM_TIMFAULTENABLE_FAULT5 (HRTIM_FLTR_FLT5EN) /*!< Fault 5 enabled */
+
+#define IS_HRTIM_TIMFAULTENABLE(TIMFAULTENABLE) (((TIMFAULTENABLE) & 0xFFFFFFE0) == 0x00000000)
+
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timer_Fault_Lock HRTIM Timer Fault Lock
+ * @{
+ * @brief Constants defining whether or not fault enabling bits are write
+ * protected for a timer
+ */
+#define HRTIM_TIMFAULTLOCK_READWRITE ((uint32_t)0x00000000) /*!< Timer fault enabling bits are read/write */
+#define HRTIM_TIMFAULTLOCK_READONLY (HRTIM_FLTR_FLTLCK) /*!< Timer fault enabling bits are read only */
+
+#define IS_HRTIM_TIMFAULTLOCK(TIMFAULTLOCK)\
+ (((TIMFAULTLOCK) == HRTIM_TIMFAULTLOCK_READWRITE) || \
+ ((TIMFAULTLOCK) == HRTIM_TIMFAULTLOCK_READONLY))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timer_Deadtime_Insertion HRTIM Timer Deadtime Insertion
+ * @{
+ * @brief Constants defining whether or not fault the dead time insertion
+ * feature is enabled for a timer
+ */
+#define HRTIM_TIMDEADTIMEINSERTION_DISABLED ((uint32_t)0x00000000) /*!< Output 1 and output 2 signals are independent */
+#define HRTIM_TIMDEADTIMEINSERTION_ENABLED HRTIM_OUTR_DTEN /*!< Deadtime is inserted between output 1 and output 2 */
+
+#define IS_HRTIM_TIMDEADTIMEINSERTION(TIMPUSHPULLMODE, TIMDEADTIMEINSERTION)\
+ ((((TIMPUSHPULLMODE) == HRTIM_TIMPUSHPULLMODE_DISABLED) && \
+ ((((TIMDEADTIMEINSERTION) == HRTIM_TIMDEADTIMEINSERTION_DISABLED) || \
+ ((TIMDEADTIMEINSERTION) == HRTIM_TIMDEADTIMEINSERTION_ENABLED)))) \
+ || \
+ (((TIMPUSHPULLMODE) == HRTIM_TIMPUSHPULLMODE_ENABLED) && \
+ ((TIMDEADTIMEINSERTION) == HRTIM_TIMDEADTIMEINSERTION_DISABLED)))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timer_Delayed_Protection_Mode HRTIM Timer Delayed Protection Mode
+ * @{
+ * @brief Constants defining all possible delayed protection modes
+ * for a timer. Also definethe source and outputs on which the delayed
+ * protection schemes are applied
+ */
+#define HRTIM_TIMDELAYEDPROTECTION_DISABLED ((uint32_t)0x00000000) /*!< No action */
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68 (HRTIM_OUTR_DLYPRTEN) /*!< Output 1 delayed Idle on external Event 6 or 8 */
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68 (HRTIM_OUTR_DLYPRT_0 | HRTIM_OUTR_DLYPRTEN) /*!< Output 2 delayed Idle on external Event 6 or 8 */
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68 (HRTIM_OUTR_DLYPRT_1 | HRTIM_OUTR_DLYPRTEN) /*!< Output 1 and output 2 delayed Idle on external Event 6 or 8 */
+#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68 (HRTIM_OUTR_DLYPRT_1 | HRTIM_OUTR_DLYPRT_0 | HRTIM_OUTR_DLYPRTEN) /*!< Balanced Idle on external Event 6 or 8 */
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 (HRTIM_OUTR_DLYPRT_2 | HRTIM_OUTR_DLYPRTEN) /*!< Output 1 delayed Idle on external Event 7 or 9 */
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 (HRTIM_OUTR_DLYPRT_2 | HRTIM_OUTR_DLYPRT_0 | HRTIM_OUTR_DLYPRTEN) /*!< Output 2 delayed Idle on external Event 7 or 9 */
+#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79 (HRTIM_OUTR_DLYPRT_2 | HRTIM_OUTR_DLYPRT_1 | HRTIM_OUTR_DLYPRTEN) /*!< Output 1 and output2 delayed Idle on external Event 7 or 9 */
+#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79 (HRTIM_OUTR_DLYPRT_2 | HRTIM_OUTR_DLYPRT_1 | HRTIM_OUTR_DLYPRT_0 | HRTIM_OUTR_DLYPRTEN) /*!< Balanced Idle on external Event 7 or 9 */
+
+#define IS_HRTIM_TIMDELAYEDPROTECTION(TIMPUSHPULLMODE, TIMDELAYEDPROTECTION)\
+ ((((TIMDELAYEDPROTECTION) == HRTIM_TIMDELAYEDPROTECTION_DISABLED) || \
+ ((TIMDELAYEDPROTECTION) == HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68) || \
+ ((TIMDELAYEDPROTECTION) == HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68) || \
+ ((TIMDELAYEDPROTECTION) == HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68) || \
+ ((TIMDELAYEDPROTECTION) == HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79) || \
+ ((TIMDELAYEDPROTECTION) == HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79) || \
+ ((TIMDELAYEDPROTECTION) == HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79)) \
+ || \
+ (((TIMPUSHPULLMODE) == HRTIM_TIMPUSHPULLMODE_ENABLED) && \
+ ((TIMDELAYEDPROTECTION) == HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68) || \
+ ((TIMDELAYEDPROTECTION) == HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79)))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timer_Update_Trigger HRTIM Timer Update Trigger
+ * @{
+ * @brief Constants defining whether the registers update is done synchronously
+ * with any other timer or master update
+ */
+#define HRTIM_TIMUPDATETRIGGER_NONE (uint32_t)0x00000000 /*!< Register update is disabled */
+#define HRTIM_TIMUPDATETRIGGER_MASTER (HRTIM_TIMCR_MSTU) /*!< Register update is triggered by the master timer update */
+#define HRTIM_TIMUPDATETRIGGER_TIMER_A (HRTIM_TIMCR_TAU) /*!< Register update is triggered by the timer A update */
+#define HRTIM_TIMUPDATETRIGGER_TIMER_B (HRTIM_TIMCR_TBU) /*!< Register update is triggered by the timer B update */
+#define HRTIM_TIMUPDATETRIGGER_TIMER_C (HRTIM_TIMCR_TCU) /*!< Register update is triggered by the timer C update*/
+#define HRTIM_TIMUPDATETRIGGER_TIMER_D (HRTIM_TIMCR_TDU) /*!< Register update is triggered by the timer D update */
+#define HRTIM_TIMUPDATETRIGGER_TIMER_E (HRTIM_TIMCR_TEU) /*!< Register update is triggered by the timer E update */
+
+#define IS_HRTIM_TIMUPDATETRIGGER(TIMUPDATETRIGGER) (((TIMUPDATETRIGGER) & 0xFE07FFFF) == 0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timer_Reset_Trigger HRTIM Timer Reset Trigger
+ * @{
+ * @brief Constants defining the events that can be selected to trigger the reset
+ * of the timer counter
+ */
+#define HRTIM_TIMRESETTRIGGER_NONE (uint32_t)0x00000000 /*!< No counter reset trigger */
+#define HRTIM_TIMRESETTRIGGER_UPDATE (HRTIM_RSTR_UPDATE) /*!< The timer counter is reset upon update event */
+#define HRTIM_TIMRESETTRIGGER_CMP2 (HRTIM_RSTR_CMP2) /*!< The timer counter is reset upon Timer Compare 2 event */
+#define HRTIM_TIMRESETTRIGGER_CMP4 (HRTIM_RSTR_CMP4) /*!< The timer counter is reset upon Timer Compare 4 event */
+#define HRTIM_TIMRESETTRIGGER_MASTER_PER (HRTIM_RSTR_MSTPER) /*!< The timercounter is reset upon master timer period event */
+#define HRTIM_TIMRESETTRIGGER_MASTER_CMP1 (HRTIM_RSTR_MSTCMP1) /*!< The timer counter is reset upon master timer Compare 1 event */
+#define HRTIM_TIMRESETTRIGGER_MASTER_CMP2 (HRTIM_RSTR_MSTCMP2) /*!< The timer counter is reset upon master timer Compare 2 event */
+#define HRTIM_TIMRESETTRIGGER_MASTER_CMP3 (HRTIM_RSTR_MSTCMP3) /*!< The timer counter is reset upon master timer Compare 3 event */
+#define HRTIM_TIMRESETTRIGGER_MASTER_CMP4 (HRTIM_RSTR_MSTCMP4) /*!< The timer counter is reset upon master timer Compare 4 event */
+#define HRTIM_TIMRESETTRIGGER_EEV_1 (HRTIM_RSTR_EXTEVNT1) /*!< The timer counter is reset upon external event 1 */
+#define HRTIM_TIMRESETTRIGGER_EEV_2 (HRTIM_RSTR_EXTEVNT2) /*!< The timer counter is reset upon external event 2 */
+#define HRTIM_TIMRESETTRIGGER_EEV_3 (HRTIM_RSTR_EXTEVNT3) /*!< The timer counter is reset upon external event 3 */
+#define HRTIM_TIMRESETTRIGGER_EEV_4 (HRTIM_RSTR_EXTEVNT4) /*!< The timer counter is reset upon external event 4 */
+#define HRTIM_TIMRESETTRIGGER_EEV_5 (HRTIM_RSTR_EXTEVNT5) /*!< The timer counter is reset upon external event 5 */
+#define HRTIM_TIMRESETTRIGGER_EEV_6 (HRTIM_RSTR_EXTEVNT6) /*!< The timer counter is reset upon external event 6 */
+#define HRTIM_TIMRESETTRIGGER_EEV_7 (HRTIM_RSTR_EXTEVNT7) /*!< The timer counter is reset upon external event 7 */
+#define HRTIM_TIMRESETTRIGGER_EEV_8 (HRTIM_RSTR_EXTEVNT8) /*!< The timer counter is reset upon external event 8 */
+#define HRTIM_TIMRESETTRIGGER_EEV_9 (HRTIM_RSTR_EXTEVNT9) /*!< The timer counter is reset upon external event 9 */
+#define HRTIM_TIMRESETTRIGGER_EEV_10 (HRTIM_RSTR_EXTEVNT10) /*!< The timer counter is reset upon external event 10 */
+#define HRTIM_TIMRESETTRIGGER_OTHER1_CMP1 (HRTIM_RSTR_TIMBCMP1) /*!< The timer counter is reset upon other timer Compare 1 event */
+#define HRTIM_TIMRESETTRIGGER_OTHER1_CMP2 (HRTIM_RSTR_TIMBCMP2) /*!< The timer counter is reset upon other timer Compare 2 event */
+#define HRTIM_TIMRESETTRIGGER_OTHER1_CMP4 (HRTIM_RSTR_TIMBCMP4) /*!< The timer counter is reset upon other timer Compare 4 event */
+#define HRTIM_TIMRESETTRIGGER_OTHER2_CMP1 (HRTIM_RSTR_TIMCCMP1) /*!< The timer counter is reset upon other timer Compare 1 event */
+#define HRTIM_TIMRESETTRIGGER_OTHER2_CMP2 (HRTIM_RSTR_TIMCCMP2) /*!< The timer counter is reset upon other timer Compare 2 event */
+#define HRTIM_TIMRESETTRIGGER_OTHER2_CMP4 (HRTIM_RSTR_TIMCCMP4) /*!< The timer counter is reset upon other timer Compare 4 event */
+#define HRTIM_TIMRESETTRIGGER_OTHER3_CMP1 (HRTIM_RSTR_TIMDCMP1) /*!< The timer counter is reset upon other timer Compare 1 event */
+#define HRTIM_TIMRESETTRIGGER_OTHER3_CMP2 (HRTIM_RSTR_TIMDCMP2) /*!< The timer counter is reset upon other timer Compare 2 event */
+#define HRTIM_TIMRESETTRIGGER_OTHER3_CMP4 (HRTIM_RSTR_TIMDCMP4) /*!< The timer counter is reset upon other timer Compare 4 event */
+#define HRTIM_TIMRESETTRIGGER_OTHER4_CMP1 (HRTIM_RSTR_TIMECMP1) /*!< The timer counter is reset upon other timer Compare 1 event */
+#define HRTIM_TIMRESETTRIGGER_OTHER4_CMP2 (HRTIM_RSTR_TIMECMP2) /*!< The timer counter is reset upon other timer Compare 2 event */
+#define HRTIM_TIMRESETTRIGGER_OTHER4_CMP4 (HRTIM_RSTR_TIMECMP4) /*!< The timer counter is reset upon other timer Compare 4 event */
+
+#define IS_HRTIM_TIMRESETTRIGGER(TIMRESETTRIGGER) (((TIMRESETTRIGGER) & 0x800000001) == 0x00000000)
+
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timer_Reset_Update HRTIM Timer Reset Update
+ * @{
+ * @brief Constants defining whether the register are updated upon Timerx
+ * counter reset or roll-over to 0 after reaching the period value
+ * in continuous mode
+ */
+#define HRTIM_TIMUPDATEONRESET_DISABLED (uint32_t)0x00000000 /*!< Update by timer x reset / roll-over disabled */
+#define HRTIM_TIMUPDATEONRESET_ENABLED (HRTIM_TIMCR_TRSTU) /*!< Update by timer x reset / roll-over enabled */
+
+#define IS_HRTIM_TIMUPDATEONRESET(TIMUPDATEONRESET) \
+ (((TIMUPDATEONRESET) == HRTIM_TIMUPDATEONRESET_DISABLED) || \
+ ((TIMUPDATEONRESET) == HRTIM_TIMUPDATEONRESET_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Compare_Unit_Auto_Delayed_Mode HRTIM Compare Unit Auto Delayed Mode
+ * @{
+ * @brief Constants defining whether the compare register is behaving in
+ * regular mode (compare match issued as soon as counter equal compare),
+ * or in auto-delayed mode
+ */
+#define HRTIM_AUTODELAYEDMODE_REGULAR ((uint32_t)0x00000000) /*!< standard compare mode */
+#define HRTIM_AUTODELAYEDMODE_AUTODELAYED_NOTIMEOUT (HRTIM_TIMCR_DELCMP2_0) /*!< Compare event generated only if a capture has occured */
+#define HRTIM_AUTODELAYEDMODE_AUTODELAYED_TIMEOUTCMP1 (HRTIM_TIMCR_DELCMP2_1) /*!< Compare event generated if a capture has occured or after a Compare 1 match (timeout if capture event is missing) */
+#define HRTIM_AUTODELAYEDMODE_AUTODELAYED_TIMEOUTCMP3 (HRTIM_TIMCR_DELCMP2_1 | HRTIM_TIMCR_DELCMP2_0) /*!< Compare event generated if a capture has occured or after a Compare 3 match (timeout if capture event is missing) */
+
+#define IS_HRTIM_AUTODELAYEDMODE(AUTODELAYEDMODE)\
+ (((AUTODELAYEDMODE) == HRTIM_AUTODELAYEDMODE_REGULAR) || \
+ ((AUTODELAYEDMODE) == HRTIM_AUTODELAYEDMODE_AUTODELAYED_NOTIMEOUT) || \
+ ((AUTODELAYEDMODE) == HRTIM_AUTODELAYEDMODE_AUTODELAYED_TIMEOUTCMP1) || \
+ ((AUTODELAYEDMODE) == HRTIM_AUTODELAYEDMODE_AUTODELAYED_TIMEOUTCMP3))
+
+/* Auto delayed mode is only available for compare units 2 and 4 */
+#define IS_HRTIM_COMPAREUNIT_AUTODELAYEDMODE(COMPAREUNIT, AUTODELAYEDMODE) \
+ ((((COMPAREUNIT) == HRTIM_COMPAREUNIT_2) && \
+ (((AUTODELAYEDMODE) == HRTIM_AUTODELAYEDMODE_REGULAR) || \
+ ((AUTODELAYEDMODE) == HRTIM_AUTODELAYEDMODE_AUTODELAYED_NOTIMEOUT) || \
+ ((AUTODELAYEDMODE) == HRTIM_AUTODELAYEDMODE_AUTODELAYED_TIMEOUTCMP1) || \
+ ((AUTODELAYEDMODE) == HRTIM_AUTODELAYEDMODE_AUTODELAYED_TIMEOUTCMP3))) \
+ || \
+ (((COMPAREUNIT) == HRTIM_COMPAREUNIT_4) && \
+ (((AUTODELAYEDMODE) == HRTIM_AUTODELAYEDMODE_REGULAR) || \
+ ((AUTODELAYEDMODE) == HRTIM_AUTODELAYEDMODE_AUTODELAYED_NOTIMEOUT) || \
+ ((AUTODELAYEDMODE) == HRTIM_AUTODELAYEDMODE_AUTODELAYED_TIMEOUTCMP1) || \
+ ((AUTODELAYEDMODE) == HRTIM_AUTODELAYEDMODE_AUTODELAYED_TIMEOUTCMP3))))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Simple_OC_Mode HRTIM Simple OC Mode
+ * @{
+ * @brief Constants defining the behavior of the output signal when the timer
+ operates in basic output compare mode
+ */
+#define HRTIM_BASICOCMODE_TOGGLE ((uint32_t)0x00000001) /*!< Ouput toggles when the timer counter reaches the compare value */
+#define HRTIM_BASICOCMODE_INACTIVE ((uint32_t)0x00000002) /*!< Ouput forced to active level when the timer counter reaches the compare value */
+#define HRTIM_BASICOCMODE_ACTIVE ((uint32_t)0x00000003) /*!< Ouput forced to inactive level when the timer counter reaches the compare value */
+
+#define IS_HRTIM_BASICOCMODE(BASICOCMODE)\
+ (((BASICOCMODE) == HRTIM_BASICOCMODE_TOGGLE) || \
+ ((BASICOCMODE) == HRTIM_BASICOCMODE_INACTIVE) || \
+ ((BASICOCMODE) == HRTIM_BASICOCMODE_ACTIVE))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Output_Polarity HRTIM Output Polarity
+ * @{
+ * @brief Constants defining the polarity of a timer output
+ */
+#define HRTIM_OUTPUTPOLARITY_HIGH ((uint32_t)0x00000000) /*!< Output is acitve HIGH */
+#define HRTIM_OUTPUTPOLARITY_LOW (HRTIM_OUTR_POL1) /*!< Output is active LOW */
+
+#define IS_HRTIM_OUTPUTPOLARITY(OUTPUTPOLARITY)\
+ (((OUTPUTPOLARITY) == HRTIM_OUTPUTPOLARITY_HIGH) || \
+ ((OUTPUTPOLARITY) == HRTIM_OUTPUTPOLARITY_LOW))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Output_Set_Source HRTIM Output Set Source
+ * @{
+ * @brief Constants defining the events that can be selected to configure the
+ * set crossbar of a timer output
+ */
+#define HRTIM_OUTPUTSET_NONE (uint32_t)0x00000000 /*!< Reset the output set crossbar */
+#define HRTIM_OUTPUTSET_RESYNC (HRTIM_SET1R_RESYNC) /*!< Timer reset event coming solely from software or SYNC input forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMPER (HRTIM_SET1R_PER) /*!< Timer period event forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMCMP1 (HRTIM_SET1R_CMP1) /*!< Timer compare 1 event forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMCMP2 (HRTIM_SET1R_CMP2) /*!< Timer compare 2 event forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMCMP3 (HRTIM_SET1R_CMP3) /*!< Timer compare 3 event forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMCMP4 (HRTIM_SET1R_CMP4) /*!< Timer compare 4 event forces the output to its active state */
+#define HRTIM_OUTPUTSET_MASTERPER (HRTIM_SET1R_MSTPER) /*!< The master timer period event forces the output to its active state */
+#define HRTIM_OUTPUTSET_MASTERCMP1 (HRTIM_SET1R_MSTCMP1) /*!< Master Timer compare 1 event forces the output to its active state */
+#define HRTIM_OUTPUTSET_MASTERCMP2 (HRTIM_SET1R_MSTCMP2) /*!< Master Timer compare 2 event forces the output to its active state */
+#define HRTIM_OUTPUTSET_MASTERCMP3 (HRTIM_SET1R_MSTCMP3) /*!< Master Timer compare 3 event forces the output to its active state */
+#define HRTIM_OUTPUTSET_MASTERCMP4 (HRTIM_SET1R_MSTCMP4) /*!< Master Timer compare 4 event forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMEV_1 (HRTIM_SET1R_TIMEVNT1) /*!< Timer event 1 forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMEV_2 (HRTIM_SET1R_TIMEVNT2) /*!< Timer event 2 forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMEV_3 (HRTIM_SET1R_TIMEVNT3) /*!< Timer event 3 forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMEV_4 (HRTIM_SET1R_TIMEVNT4) /*!< Timer event 4 forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMEV_5 (HRTIM_SET1R_TIMEVNT5) /*!< Timer event 5 forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMEV_6 (HRTIM_SET1R_TIMEVNT6) /*!< Timer event 6 forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMEV_7 (HRTIM_SET1R_TIMEVNT7) /*!< Timer event 7 forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMEV_8 (HRTIM_SET1R_TIMEVNT8) /*!< Timer event 8 forces the output to its active state */
+#define HRTIM_OUTPUTSET_TIMEV_9 (HRTIM_SET1R_TIMEVNT9) /*!< Timer event 9 forces the output to its active state */
+#define HRTIM_OUTPUTSET_EEV_1 (HRTIM_SET1R_EXTVNT1) /*!< External event 1 forces the output to its active state */
+#define HRTIM_OUTPUTSET_EEV_2 (HRTIM_SET1R_EXTVNT2) /*!< External event 2 forces the output to its active state */
+#define HRTIM_OUTPUTSET_EEV_3 (HRTIM_SET1R_EXTVNT3) /*!< External event 3 forces the output to its active state */
+#define HRTIM_OUTPUTSET_EEV_4 (HRTIM_SET1R_EXTVNT4) /*!< External event 4 forces the output to its active state */
+#define HRTIM_OUTPUTSET_EEV_5 (HRTIM_SET1R_EXTVNT5) /*!< External event 5 forces the output to its active state */
+#define HRTIM_OUTPUTSET_EEV_6 (HRTIM_SET1R_EXTVNT6) /*!< External event 6 forces the output to its active state */
+#define HRTIM_OUTPUTSET_EEV_7 (HRTIM_SET1R_EXTVNT7) /*!< External event 7 forces the output to its active state */
+#define HRTIM_OUTPUTSET_EEV_8 (HRTIM_SET1R_EXTVNT8) /*!< External event 8 forces the output to its active state */
+#define HRTIM_OUTPUTSET_EEV_9 (HRTIM_SET1R_EXTVNT9) /*!< External event 9 forces the output to its active state */
+#define HRTIM_OUTPUTSET_EEV_10 (HRTIM_SET1R_EXTVNT10) /*!< External event 10 forces the output to its active state */
+#define HRTIM_OUTPUTSET_UPDATE (HRTIM_SET1R_UPDATE) /*!< Timer register update event forces the output to its active state */
+
+#define IS_HRTIM_OUTPUTSET(OUTPUTSET)\
+ (((OUTPUTSET) == HRTIM_OUTPUTSET_NONE) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_RESYNC) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMPER) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMCMP1) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMCMP2) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMCMP3) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMCMP4) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_MASTERPER) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_MASTERCMP1) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_MASTERCMP2) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_MASTERCMP3) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_MASTERCMP4) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMEV_1) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMEV_2) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMEV_3) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMEV_4) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMEV_5) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMEV_6) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMEV_7) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMEV_8) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_TIMEV_9) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_EEV_1) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_EEV_2) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_EEV_3) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_EEV_4) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_EEV_5) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_EEV_6) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_EEV_7) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_EEV_8) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_EEV_9) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_EEV_10) || \
+ ((OUTPUTSET) == HRTIM_OUTPUTSET_UPDATE))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Output_Reset_Source HRTIM Output Reset Source
+ * @{
+ * @brief Constants defining the events that can be selected to configure the
+ * set crossbar of a timer output
+ */
+#define HRTIM_OUTPUTRESET_NONE (uint32_t)0x00000000 /*!< Reset the output reset crossbar */
+#define HRTIM_OUTPUTRESET_RESYNC (HRTIM_RST1R_RESYNC) /*!< Timer reset event coming solely from software or SYNC input forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMPER (HRTIM_RST1R_PER) /*!< Timer period event forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMCMP1 (HRTIM_RST1R_CMP1) /*!< Timer compare 1 event forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMCMP2 (HRTIM_RST1R_CMP2) /*!< Timer compare 2 event forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMCMP3 (HRTIM_RST1R_CMP3) /*!< Timer compare 3 event forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMCMP4 (HRTIM_RST1R_CMP4) /*!< Timer compare 4 event forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_MASTERPER (HRTIM_RST1R_MSTPER) /*!< The master timer period event forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_MASTERCMP1 (HRTIM_RST1R_MSTCMP1) /*!< Master Timer compare 1 event forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_MASTERCMP2 (HRTIM_RST1R_MSTCMP2) /*!< Master Timer compare 2 event forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_MASTERCMP3 (HRTIM_RST1R_MSTCMP3) /*!< Master Timer compare 3 event forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_MASTERCMP4 (HRTIM_RST1R_MSTCMP4) /*!< Master Timer compare 4 event forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMEV_1 (HRTIM_RST1R_TIMEVNT1) /*!< Timer event 1 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMEV_2 (HRTIM_RST1R_TIMEVNT2) /*!< Timer event 2 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMEV_3 (HRTIM_RST1R_TIMEVNT3) /*!< Timer event 3 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMEV_4 (HRTIM_RST1R_TIMEVNT4) /*!< Timer event 4 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMEV_5 (HRTIM_RST1R_TIMEVNT5) /*!< Timer event 5 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMEV_6 (HRTIM_RST1R_TIMEVNT6) /*!< Timer event 6 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMEV_7 (HRTIM_RST1R_TIMEVNT7) /*!< Timer event 7 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMEV_8 (HRTIM_RST1R_TIMEVNT8) /*!< Timer event 8 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_TIMEV_9 (HRTIM_RST1R_TIMEVNT9) /*!< Timer event 9 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_EEV_1 (HRTIM_RST1R_EXTVNT1) /*!< External event 1 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_EEV_2 (HRTIM_RST1R_EXTVNT2) /*!< External event 2 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_EEV_3 (HRTIM_RST1R_EXTVNT3) /*!< External event 3 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_EEV_4 (HRTIM_RST1R_EXTVNT4) /*!< External event 4 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_EEV_5 (HRTIM_RST1R_EXTVNT5) /*!< External event 5 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_EEV_6 (HRTIM_RST1R_EXTVNT6) /*!< External event 6 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_EEV_7 (HRTIM_RST1R_EXTVNT7) /*!< External event 7 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_EEV_8 (HRTIM_RST1R_EXTVNT8) /*!< External event 8 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_EEV_9 (HRTIM_RST1R_EXTVNT9) /*!< External event 9 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_EEV_10 (HRTIM_RST1R_EXTVNT10) /*!< External event 10 forces the output to its inactive state */
+#define HRTIM_OUTPUTRESET_UPDATE (HRTIM_RST1R_UPDATE) /*!< Timer register update event forces the output to its inactive state */
+
+#define IS_HRTIM_OUTPUTRESET(OUTPUTRESET)\
+ (((OUTPUTRESET) == HRTIM_OUTPUTRESET_NONE) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_RESYNC) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMPER) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMCMP1) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMCMP2) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMCMP3) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMCMP4) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_MASTERPER) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_MASTERCMP1) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_MASTERCMP2) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_MASTERCMP3) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_MASTERCMP4) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMEV_1) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMEV_2) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMEV_3) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMEV_4) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMEV_5) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMEV_6) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMEV_7) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMEV_8) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_TIMEV_9) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_EEV_1) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_EEV_2) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_EEV_3) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_EEV_4) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_EEV_5) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_EEV_6) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_EEV_7) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_EEV_8) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_EEV_9) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_EEV_10) || \
+ ((OUTPUTRESET) == HRTIM_OUTPUTRESET_UPDATE))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Output_Idle_Mode HRTIM Output Idle Mode
+ * @{
+ * @brief Constants defining whether or not the timer output transition to its
+ IDLE state when burst mode is entered
+ */
+#define HRTIM_OUTPUTIDLEMODE_NONE (uint32_t)0x00000000 /*!< The output is not affected by the burst mode operation */
+#define HRTIM_OUTPUTIDLEMODE_IDLE (HRTIM_OUTR_IDLM1) /*!< The output is in idle state when requested by the burst mode controller */
+
+#define IS_HRTIM_OUTPUTIDLEMODE(OUTPUTIDLEMODE)\
+ (((OUTPUTIDLEMODE) == HRTIM_OUTPUTIDLEMODE_NONE) || \
+ ((OUTPUTIDLEMODE) == HRTIM_OUTPUTIDLEMODE_IDLE))
+ /**
+ * @}
+ */
+
+/** @defgroup HRTIM_Output_IDLE_Level HRTIM Output IDLE Level
+ * @{
+ * @brief Constants defining the output level when output is in IDLE state
+ */
+#define HRTIM_OUTPUTIDLELEVEL_INACTIVE (uint32_t)0x00000000 /*!< Output at inactive level when in IDLE state */
+#define HRTIM_OUTPUTIDLELEVEL_ACTIVE (HRTIM_OUTR_IDLES1) /*!< Output at active level when in IDLE state */
+
+#define IS_HRTIM_OUTPUTIDLELEVEL(OUTPUTIDLELEVEL)\
+ (((OUTPUTIDLELEVEL) == HRTIM_OUTPUTIDLELEVEL_INACTIVE) || \
+ ((OUTPUTIDLELEVEL) == HRTIM_OUTPUTIDLELEVEL_ACTIVE))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Output_FAULT_Level HRTIM Output FAULT Level
+ * @{
+ * @brief Constants defining the output level when output is in FAULT state
+ */
+#define HRTIM_OUTPUTFAULTLEVEL_NONE (uint32_t)0x00000000 /*!< The output is not affected by the fault input */
+#define HRTIM_OUTPUTFAULTLEVEL_ACTIVE (HRTIM_OUTR_FAULT1_0) /*!< Output at active level when in FAULT state */
+#define HRTIM_OUTPUTFAULTLEVEL_INACTIVE (HRTIM_OUTR_FAULT1_1) /*!< Output at inactive level when in FAULT state */
+#define HRTIM_OUTPUTFAULTLEVEL_HIGHZ (HRTIM_OUTR_FAULT1_1 | HRTIM_OUTR_FAULT1_0) /*!< Output is tri-stated when in FAULT state */
+
+#define IS_HRTIM_OUTPUTFAULTLEVEL(OUTPUTFAULTLEVEL)\
+ (((OUTPUTFAULTLEVEL) == HRTIM_OUTPUTFAULTLEVEL_NONE) || \
+ ((OUTPUTFAULTLEVEL) == HRTIM_OUTPUTFAULTLEVEL_ACTIVE) || \
+ ((OUTPUTFAULTLEVEL) == HRTIM_OUTPUTFAULTLEVEL_INACTIVE) || \
+ ((OUTPUTFAULTLEVEL) == HRTIM_OUTPUTFAULTLEVEL_HIGHZ))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Output_Chopper_Mode_Enable HRTIM Output Chopper Mode Enable
+ * @{
+ * @brief Constants defining whether or not chopper mode is enabled for a timer
+ output
+ */
+#define HRTIM_OUTPUTCHOPPERMODE_DISABLED (uint32_t)0x00000000 /*!< Output signal is not altered */
+#define HRTIM_OUTPUTCHOPPERMODE_ENABLED (HRTIM_OUTR_CHP1) /*!< Output signal is chopped by a carrier signal */
+
+#define IS_HRTIM_OUTPUTCHOPPERMODE(OUTPUTCHOPPERMODE)\
+ (((OUTPUTCHOPPERMODE) == HRTIM_OUTPUTCHOPPERMODE_DISABLED) || \
+ ((OUTPUTCHOPPERMODE) == HRTIM_OUTPUTCHOPPERMODE_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Output_Burst_Mode_Entry_Delayed HRTIM Output Burst Mode Entry Delayed
+ * @{
+ * @brief Constants defining the idle mode entry is delayed by forcing a
+ deadtime insertion before switching the outputs to their idle state
+ */
+#define HRTIM_OUTPUTBURSTMODEENTRY_REGULAR (uint32_t)0x00000000 /*!< The programmed Idle state is applied immediately to the Output */
+#define HRTIM_OUTPUTBURSTMODEENTRY_DELAYED (HRTIM_OUTR_DIDL1) /*!< Deadtime is inserted on output before entering the idle mode */
+
+#define IS_HRTIM_OUTPUTBURSTMODEENTRY(OUTPUTBURSTMODEENTRY)\
+ (((OUTPUTBURSTMODEENTRY) == HRTIM_OUTPUTBURSTMODEENTRY_REGULAR) || \
+ ((OUTPUTBURSTMODEENTRY) == HRTIM_OUTPUTBURSTMODEENTRY_DELAYED))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Capture_Unit_Trigger HRTIM Capture Unit Trigger
+ * @{
+ * @brief Constants defining the events that can be selected to trigger the
+ * capture of the timing unit counter
+ */
+#define HRTIM_CAPTURETRIGGER_NONE (uint32_t)0x00000000 /*!< Capture trigger is disabled */
+#define HRTIM_CAPTURETRIGGER_UPDATE (HRTIM_CPT1CR_UPDCPT) /*!< The update event triggers the Capture */
+#define HRTIM_CAPTURETRIGGER_EEV_1 (HRTIM_CPT1CR_EXEV1CPT) /*!< The External event 1 triggers the Capture */
+#define HRTIM_CAPTURETRIGGER_EEV_2 (HRTIM_CPT1CR_EXEV2CPT) /*!< The External event 2 triggers the Capture */
+#define HRTIM_CAPTURETRIGGER_EEV_3 (HRTIM_CPT1CR_EXEV3CPT) /*!< The External event 3 triggers the Capture */
+#define HRTIM_CAPTURETRIGGER_EEV_4 (HRTIM_CPT1CR_EXEV4CPT) /*!< The External event 4 triggers the Capture */
+#define HRTIM_CAPTURETRIGGER_EEV_5 (HRTIM_CPT1CR_EXEV5CPT) /*!< The External event 5 triggers the Capture */
+#define HRTIM_CAPTURETRIGGER_EEV_6 (HRTIM_CPT1CR_EXEV6CPT) /*!< The External event 6 triggers the Capture */
+#define HRTIM_CAPTURETRIGGER_EEV_7 (HRTIM_CPT1CR_EXEV7CPT) /*!< The External event 7 triggers the Capture */
+#define HRTIM_CAPTURETRIGGER_EEV_8 (HRTIM_CPT1CR_EXEV8CPT) /*!< The External event 8 triggers the Capture */
+#define HRTIM_CAPTURETRIGGER_EEV_9 (HRTIM_CPT1CR_EXEV9CPT) /*!< The External event 9 triggers the Capture */
+#define HRTIM_CAPTURETRIGGER_EEV_10 (HRTIM_CPT1CR_EXEV10CPT) /*!< The External event 10 triggers the Capture */
+#define HRTIM_CAPTURETRIGGER_TA1_SET (HRTIM_CPT1CR_TA1SET) /*!< Capture is triggered by TA1 output inactive to active transition */
+#define HRTIM_CAPTURETRIGGER_TA1_RESET (HRTIM_CPT1CR_TA1RST) /*!< Capture is triggered by TA1 output active to inactive transition */
+#define HRTIM_CAPTURETRIGGER_TIMERA_CMP1 (HRTIM_CPT1CR_TIMACMP1) /*!< Timer A Compare 1 triggers Capture */
+#define HRTIM_CAPTURETRIGGER_TIMERA_CMP2 (HRTIM_CPT1CR_TIMACMP2) /*!< Timer A Compare 2 triggers Capture */
+#define HRTIM_CAPTURETRIGGER_TB1_SET (HRTIM_CPT1CR_TB1SET) /*!< Capture is triggered by TB1 output inactive to active transition */
+#define HRTIM_CAPTURETRIGGER_TB1_RESET (HRTIM_CPT1CR_TB1RST) /*!< Capture is triggered by TB1 output active to inactive transition */
+#define HRTIM_CAPTURETRIGGER_TIMERB_CMP1 (HRTIM_CPT1CR_TIMBCMP1) /*!< Timer B Compare 1 triggers Capture */
+#define HRTIM_CAPTURETRIGGER_TIMERB_CMP2 (HRTIM_CPT1CR_TIMBCMP2) /*!< Timer B Compare 2 triggers Capture */
+#define HRTIM_CAPTURETRIGGER_TC1_SET (HRTIM_CPT1CR_TC1SET) /*!< Capture is triggered by TC1 output inactive to active transition */
+#define HRTIM_CAPTURETRIGGER_TC1_RESET (HRTIM_CPT1CR_TC1RST) /*!< Capture is triggered by TC1 output active to inactive transition */
+#define HRTIM_CAPTURETRIGGER_TIMERC_CMP1 (HRTIM_CPT1CR_TIMCCMP1) /*!< Timer C Compare 1 triggers Capture */
+#define HRTIM_CAPTURETRIGGER_TIMERC_CMP2 (HRTIM_CPT1CR_TIMCCMP2) /*!< Timer C Compare 2 triggers Capture */
+#define HRTIM_CAPTURETRIGGER_TD1_SET (HRTIM_CPT1CR_TD1SET) /*!< Capture is triggered by TD1 output inactive to active transition */
+#define HRTIM_CAPTURETRIGGER_TD1_RESET (HRTIM_CPT1CR_TD1RST) /*!< Capture is triggered by TD1 output active to inactive transition */
+#define HRTIM_CAPTURETRIGGER_TIMERD_CMP1 (HRTIM_CPT1CR_TIMDCMP1) /*!< Timer D Compare 1 triggers Capture */
+#define HRTIM_CAPTURETRIGGER_TIMERD_CMP2 (HRTIM_CPT1CR_TIMDCMP2) /*!< Timer D Compare 2 triggers Capture */
+#define HRTIM_CAPTURETRIGGER_TE1_SET (HRTIM_CPT1CR_TE1SET) /*!< Capture is triggered by TE1 output inactive to active transition */
+#define HRTIM_CAPTURETRIGGER_TE1_RESET (HRTIM_CPT1CR_TE1RST) /*!< Capture is triggered by TE1 output active to inactive transition */
+#define HRTIM_CAPTURETRIGGER_TIMERE_CMP1 (HRTIM_CPT1CR_TIMECMP1) /*!< Timer E Compare 1 triggers Capture */
+#define HRTIM_CAPTURETRIGGER_TIMERE_CMP2 (HRTIM_CPT1CR_TIMECMP2) /*!< Timer E Compare 2 triggers Capture */
+
+#define IS_HRTIM_TIMER_CAPTURETRIGGER(TIMER, CAPTURETRIGGER) \
+ (((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_NONE) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_UPDATE) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_EEV_1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_EEV_2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_EEV_3) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_EEV_4) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_EEV_5) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_EEV_6) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_EEV_7) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_EEV_8) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_EEV_9) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_EEV_10) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_A) && \
+ (((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TB1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TB1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERB_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERB_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TC1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TC1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERC_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERC_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TD1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TD1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERD_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERD_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TE1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TE1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERE_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERE_CMP2))) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_B) && \
+ (((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TA1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TA1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERA_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERA_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TC1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TC1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERC_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERC_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TD1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TD1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERD_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERD_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TE1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TE1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERE_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERE_CMP2))) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_C) && \
+ (((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TA1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TA1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERA_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERA_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TB1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TB1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERB_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERB_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TD1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TD1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERD_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERD_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TE1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TE1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERE_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERE_CMP2))) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_D) && \
+ (((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TA1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TA1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERA_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERA_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TB1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TB1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERB_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERB_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TC1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TC1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERC_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERC_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TE1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TE1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERE_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERE_CMP2))) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_E) && \
+ (((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TA1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TA1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERA_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERA_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TB1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TB1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERB_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERB_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TC1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TC1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERC_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERC_CMP2) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TD1_SET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TD1_RESET) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERD_CMP1) || \
+ ((CAPTURETRIGGER) == HRTIM_CAPTURETRIGGER_TIMERD_CMP2))))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timer_External_Event_Filter HRTIM Timer External Event Filter
+ * @{
+ * @brief Constants defining the event filtering apploed to external events
+ * by a timer
+ */
+#define HRTIM_TIMEVENTFILTER_NONE (0x00000000)
+#define HRTIM_TIMEVENTFILTER_BLANKINGCMP1 (HRTIM_EEFR1_EE1FLTR_0) /*!< Blanking from counter reset/roll-over to Compare 1 */
+#define HRTIM_TIMEVENTFILTER_BLANKINGCMP2 (HRTIM_EEFR1_EE1FLTR_1) /*!< Blanking from counter reset/roll-over to Compare 2 */
+#define HRTIM_TIMEVENTFILTER_BLANKINGCMP3 (HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) /*!< Blanking from counter reset/roll-over to Compare 3 */
+#define HRTIM_TIMEVENTFILTER_BLANKINGCMP4 (HRTIM_EEFR1_EE1FLTR_2) /*!< Blanking from counter reset/roll-over to Compare 4 */
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR1 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0) /*!< Blanking from another timing unit: TIMFLTR1 source */
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR2 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1) /*!< Blanking from another timing unit: TIMFLTR2 source */
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR3 (HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) /*!< Blanking from another timing unit: TIMFLTR3 source */
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR4 (HRTIM_EEFR1_EE1FLTR_3) /*!< Blanking from another timing unit: TIMFLTR4 source */
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR5 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_0) /*!< Blanking from another timing unit: TIMFLTR5 source */
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR6 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1) /*!< Blanking from another timing unit: TIMFLTR6 source */
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR7 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_0) /*!< Blanking from another timing unit: TIMFLTR7 source */
+#define HRTIM_TIMEVENTFILTER_BLANKINGFLTR8 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2) /*!< Blanking from another timing unit: TIMFLTR8 source */
+#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP2 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0) /*!< Windowing from counter reset/roll-over to Compare 2 */
+#define HRTIM_TIMEVENTFILTER_WINDOWINGCMP3 (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1) /*!< Windowing from counter reset/roll-over to Compare 3 */
+#define HRTIM_TIMEVENTFILTER_WINDOWINGTIM (HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_1 | HRTIM_EEFR1_EE1FLTR_3 | HRTIM_EEFR1_EE1FLTR_2 | HRTIM_EEFR1_EE1FLTR_0) /*!< Windowing from another timing unit: TIMWIN source */
+
+#define IS_HRTIM_TIMEVENTFILTER(TIMEVENTFILTER)\
+ (((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_NONE) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_BLANKINGCMP1) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_BLANKINGCMP2) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_BLANKINGCMP3) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_BLANKINGCMP4) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_BLANKINGFLTR1) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_BLANKINGFLTR2) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_BLANKINGFLTR3) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_BLANKINGFLTR4) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_BLANKINGFLTR5) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_BLANKINGFLTR6) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_BLANKINGFLTR7) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_BLANKINGFLTR8) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_WINDOWINGCMP2) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_WINDOWINGCMP3) || \
+ ((TIMEVENTFILTER) == HRTIM_TIMEVENTFILTER_WINDOWINGTIM))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timer_External_Event_Latch HRTIM Timer External Event Latch
+ * @{
+ * @brief Constants defining whether or not the external event is
+ * memorized (latched) and generated as soon as the blanking period
+ * is completed or the window ends
+ */
+#define HRTIM_TIMEVENTLATCH_DISABLED ((uint32_t)0x00000000) /*!< Event is ignored if it happens during a blank, or passed through during a window */
+#define HRTIM_TIMEVENTLATCH_ENABLED HRTIM_EEFR1_EE1LTCH /*!< Event is latched and delayed till the end of the blanking or windowing period */
+
+#define IS_HRTIM_TIMEVENTLATCH(TIMEVENTLATCH)\
+ (((TIMEVENTLATCH) == HRTIM_TIMEVENTLATCH_DISABLED) || \
+ ((TIMEVENTLATCH) == HRTIM_TIMEVENTLATCH_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Deadtime_Prescaler_Ratio HRTIM Deadtime Prescaler Ratio
+ * @{
+ * @brief Constants defining division ratio between the timer clock frequency
+ * (fHRTIM) and the deadtime generator clock (fDTG)
+ */
+#define HRTIM_TIMDEADTIME_PRESCALERRATIO_MUL8 ((uint32_t)0x00000000) /*!< fDTG = fHRTIM * 8 */
+#define HRTIM_TIMDEADTIME_PRESCALERRATIO_MUL4 (HRTIM_DTR_DTPRSC_0) /*!< fDTG = fHRTIM * 4 */
+#define HRTIM_TIMDEADTIME_PRESCALERRATIO_MUL2 (HRTIM_DTR_DTPRSC_1) /*!< fDTG = fHRTIM * 2 */
+#define HRTIM_TIMDEADTIME_PRESCALERRATIO_DIV1 (HRTIM_DTR_DTPRSC_1 | HRTIM_DTR_DTPRSC_0) /*!< fDTG = fHRTIM */
+#define HRTIM_TIMDEADTIME_PRESCALERRATIO_DIV2 (HRTIM_DTR_DTPRSC_2) /*!< fDTG = fHRTIM / 2 */
+#define HRTIM_TIMDEADTIME_PRESCALERRATIO_DIV4 (HRTIM_DTR_DTPRSC_2 | HRTIM_DTR_DTPRSC_0) /*!< fDTG = fHRTIM / 4 */
+#define HRTIM_TIMDEADTIME_PRESCALERRATIO_DIV8 (HRTIM_DTR_DTPRSC_2 | HRTIM_DTR_DTPRSC_1) /*!< fDTG = fHRTIM / 8 */
+#define HRTIM_TIMDEADTIME_PRESCALERRATIO_DIV16 (HRTIM_DTR_DTPRSC_2 | HRTIM_DTR_DTPRSC_1 | HRTIM_DTR_DTPRSC_0) /*!< fDTG = fHRTIM / 16 */
+
+#define IS_HRTIM_TIMDEADTIME_PRESCALERRATIO(PRESCALERRATIO)\
+ (((PRESCALERRATIO) == HRTIM_TIMDEADTIME_PRESCALERRATIO_MUL8) || \
+ ((PRESCALERRATIO) == HRTIM_TIMDEADTIME_PRESCALERRATIO_MUL4) || \
+ ((PRESCALERRATIO) == HRTIM_TIMDEADTIME_PRESCALERRATIO_MUL2) || \
+ ((PRESCALERRATIO) == HRTIM_TIMDEADTIME_PRESCALERRATIO_DIV1) || \
+ ((PRESCALERRATIO) == HRTIM_TIMDEADTIME_PRESCALERRATIO_DIV2) || \
+ ((PRESCALERRATIO) == HRTIM_TIMDEADTIME_PRESCALERRATIO_DIV4) || \
+ ((PRESCALERRATIO) == HRTIM_TIMDEADTIME_PRESCALERRATIO_DIV8) || \
+ ((PRESCALERRATIO) == HRTIM_TIMDEADTIME_PRESCALERRATIO_DIV16))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Deadtime_Rising_Sign HRTIM Deadtime Rising Sign
+ * @{
+ * @brief Constants defining whether the deadtime is positive or negative
+ * (overlapping signal) on rising edge
+ */
+#define HRTIM_TIMDEADTIME_RISINGSIGN_POSITIVE ((uint32_t)0x00000000) /*!< Positive deadtime on rising edge */
+#define HRTIM_TIMDEADTIME_RISINGSIGN_NEGATIVE (HRTIM_DTR_SDTR) /*!< Negative deadtime on rising edge */
+
+#define IS_HRTIM_TIMDEADTIME_RISINGSIGN(RISINGSIGN)\
+ (((RISINGSIGN) == HRTIM_TIMDEADTIME_RISINGSIGN_POSITIVE) || \
+ ((RISINGSIGN) == HRTIM_TIMDEADTIME_RISINGSIGN_NEGATIVE))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Deadtime_Rising_Lock HRTIM Deadtime Rising Lock
+ * @{
+ * @brief Constants defining whether or not the deadtime (rising sign and
+ * value) is write protected
+ */
+#define HRTIM_TIMDEADTIME_RISINGLOCK_WRITE ((uint32_t)0x00000000) /*!< Deadtime rising value and sign is writable */
+#define HRTIM_TIMDEADTIME_RISINGLOCK_READONLY (HRTIM_DTR_DTRLK) /*!< Deadtime rising value and sign is read-only */
+
+#define IS_HRTIM_TIMDEADTIME_RISINGLOCK(RISINGLOCK)\
+ (((RISINGLOCK) == HRTIM_TIMDEADTIME_RISINGLOCK_WRITE) || \
+ ((RISINGLOCK) == HRTIM_TIMDEADTIME_RISINGLOCK_READONLY))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Deadtime_Rising_Sign_Lock HRTIM Deadtime Rising Sign Lock
+ * @{
+ * @brief Constants defining whether or not the deadtime rising sign is write
+ * protected
+ */
+#define HRTIM_TIMDEADTIME_RISINGSIGNLOCK_WRITE ((uint32_t)0x00000000) /*!< Deadtime rising sign is writable */
+#define HRTIM_TIMDEADTIME_RISINGSIGNLOCK_READONLY (HRTIM_DTR_DTRSLK) /*!< Deadtime rising sign is read-only */
+
+#define IS_HRTIM_TIMDEADTIME_RISINGSIGNLOCK(RISINGSIGNLOCK)\
+ (((RISINGSIGNLOCK) == HRTIM_TIMDEADTIME_RISINGSIGNLOCK_WRITE) || \
+ ((RISINGSIGNLOCK) == HRTIM_TIMDEADTIME_RISINGSIGNLOCK_READONLY))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Deadtime_Falling_Sign HRTIM Deadtime Falling Sign
+ * @{
+ * @brief Constants defining whether the deadtime is positive or negative
+ * (overlapping signal) on falling edge
+ */
+#define HRTIM_TIMDEADTIME_FALLINGSIGN_POSITIVE ((uint32_t)0x00000000) /*!< Positive deadtime on falling edge */
+#define HRTIM_TIMDEADTIME_FALLINGSIGN_NEGATIVE (HRTIM_DTR_SDTF) /*!< Negative deadtime on falling edge */
+
+#define IS_HRTIM_TIMDEADTIME_FALLINGSIGN(FALLINGSIGN)\
+ (((FALLINGSIGN) == HRTIM_TIMDEADTIME_FALLINGSIGN_POSITIVE) || \
+ ((FALLINGSIGN) == HRTIM_TIMDEADTIME_FALLINGSIGN_NEGATIVE))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Deadtime_Falling_Lock HRTIM Deadtime Falling Lock
+ * @{
+ * @brief Constants defining whether or not the deadtime (falling sign and
+ * value) is write protected
+ */
+#define HRTIM_TIMDEADTIME_FALLINGLOCK_WRITE ((uint32_t)0x00000000) /*!< Deadtime falling value and sign is writable */
+#define HRTIM_TIMDEADTIME_FALLINGLOCK_READONLY (HRTIM_DTR_DTFLK) /*!< Deadtime falling value and sign is read-only */
+
+#define IS_HRTIM_TIMDEADTIME_FALLINGLOCK(FALLINGLOCK)\
+ (((FALLINGLOCK) == HRTIM_TIMDEADTIME_FALLINGLOCK_WRITE) || \
+ ((FALLINGLOCK) == HRTIM_TIMDEADTIME_FALLINGLOCK_READONLY))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Deadtime_Falling_Sign_Lock HRTIM Deadtime Falling Sign Lock
+ * @{
+ * @brief Constants defining whether or not the deadtime falling sign is write
+ * protected
+ */
+#define HRTIM_TIMDEADTIME_FALLINGSIGNLOCK_WRITE ((uint32_t)0x00000000) /*!< Deadtime falling sign is writable */
+#define HRTIM_TIMDEADTIME_FALLINGSIGNLOCK_READONLY (HRTIM_DTR_DTFSLK) /*!< Deadtime falling sign is read-only */
+
+#define IS_HRTIM_TIMDEADTIME_FALLINGSIGNLOCK(FALLINGSIGNLOCK)\
+ (((FALLINGSIGNLOCK) == HRTIM_TIMDEADTIME_FALLINGSIGNLOCK_WRITE) || \
+ ((FALLINGSIGNLOCK) == HRTIM_TIMDEADTIME_FALLINGSIGNLOCK_READONLY))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Chopper_Frequency HRTIM Chopper Frequency
+ * @{
+ * @brief Constants defining the frequency of the generated high frequency carrier
+ */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV16 ((uint32_t)0x000000) /*!< fCHPFRQ = fHRTIM / 16 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV32 (HRTIM_CHPR_CARFRQ_0) /*!< fCHPFRQ = fHRTIM / 32 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV48 (HRTIM_CHPR_CARFRQ_1) /*!< fCHPFRQ = fHRTIM / 48 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV64 (HRTIM_CHPR_CARFRQ_1 | HRTIM_CHPR_CARFRQ_0) /*!< fCHPFRQ = fHRTIM / 64 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV80 (HRTIM_CHPR_CARFRQ_2) /*!< fCHPFRQ = fHRTIM / 80 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV96 (HRTIM_CHPR_CARFRQ_2 | HRTIM_CHPR_CARFRQ_0) /*!< fCHPFRQ = fHRTIM / 96 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV112 (HRTIM_CHPR_CARFRQ_2 | HRTIM_CHPR_CARFRQ_1) /*!< fCHPFRQ = fHRTIM / 112 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV128 (HRTIM_CHPR_CARFRQ_2 | HRTIM_CHPR_CARFRQ_1 | HRTIM_CHPR_CARFRQ_0) /*!< fCHPFRQ = fHRTIM / 128 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV144 (HRTIM_CHPR_CARFRQ_3) /*!< fCHPFRQ = fHRTIM / 144 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV160 (HRTIM_CHPR_CARFRQ_3 | HRTIM_CHPR_CARFRQ_0) /*!< fCHPFRQ = fHRTIM / 160 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV176 (HRTIM_CHPR_CARFRQ_3 | HRTIM_CHPR_CARFRQ_1) /*!< fCHPFRQ = fHRTIM / 176 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV192 (HRTIM_CHPR_CARFRQ_3 | HRTIM_CHPR_CARFRQ_1 | HRTIM_CHPR_CARFRQ_0) /*!< fCHPFRQ = fHRTIM / 192 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV208 (HRTIM_CHPR_CARFRQ_3 | HRTIM_CHPR_CARFRQ_2) /*!< fCHPFRQ = fHRTIM / 208 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV224 (HRTIM_CHPR_CARFRQ_3 | HRTIM_CHPR_CARFRQ_2 | HRTIM_CHPR_CARFRQ_0) /*!< fCHPFRQ = fHRTIM / 224 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV240 (HRTIM_CHPR_CARFRQ_3 | HRTIM_CHPR_CARFRQ_2 | HRTIM_CHPR_CARFRQ_1) /*!< fCHPFRQ = fHRTIM / 240 */
+#define HRTIM_CHOPPER_PRESCALERRATIO_DIV256 (HRTIM_CHPR_CARFRQ_3 | HRTIM_CHPR_CARFRQ_2 | HRTIM_CHPR_CARFRQ_1 | HRTIM_CHPR_CARFRQ_0) /*!< fCHPFRQ = fHRTIM / 256 */
+
+#define IS_HRTIM_CHOPPER_PRESCALERRATIO(PRESCALERRATIO)\
+ (((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV16) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV32) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV48) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV64) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV80) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV96) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV112) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV128) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV144) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV160) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV176) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV192) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV208) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV224) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV240) || \
+ ((PRESCALERRATIO) == HRTIM_CHOPPER_PRESCALERRATIO_DIV256))
+ /**
+ * @}
+ */
+
+/** @defgroup HRTIM_Chopper_Duty_Cycle HRTIM Chopper Duty Cycle
+ * @{
+ * @brief Constants defining the duty cycle of the generated high frequency carrier
+ * Duty cycle can be adjusted by 1/8 step (from 0/8 up to 7/8)
+ */
+#define HRTIM_CHOPPER_DUTYCYCLE_0 ((uint32_t)0x000000) /*!< 0/8 (i.e. only 1st pulse is present) */ /*!< fCHPFRQ = fHRTIM / 16 */
+#define HRTIM_CHOPPER_DUTYCYCLE_125 (HRTIM_CHPR_CARDTY_0) /*!< 1/8 (12.5 %)*/ /*!< fCHPFRQ = fHRTIM / 16 */
+#define HRTIM_CHOPPER_DUTYCYCLE_250 (HRTIM_CHPR_CARDTY_1) /*!< 2/8 (25 %) */ /*!< fCHPFRQ = fHRTIM / 16 */
+#define HRTIM_CHOPPER_DUTYCYCLE_375 (HRTIM_CHPR_CARDTY_1 | HRTIM_CHPR_CARDTY_0) /*!< 3/8 (37.5 %) */ /*!< fCHPFRQ = fHRTIM / 16 */
+#define HRTIM_CHOPPER_DUTYCYCLE_500 (HRTIM_CHPR_CARDTY_2) /*!< 4/8 (50 %) */ /*!< fCHPFRQ = fHRTIM / 16 */
+#define HRTIM_CHOPPER_DUTYCYCLE_625 (HRTIM_CHPR_CARDTY_2 | HRTIM_CHPR_CARDTY_0) /*!< 5/8 (62.5 %) */ /*!< fCHPFRQ = fHRTIM / 16 */
+#define HRTIM_CHOPPER_DUTYCYCLE_750 (HRTIM_CHPR_CARDTY_2 | HRTIM_CHPR_CARDTY_1) /*!< 6/8 (75 %) */ /*!< fCHPFRQ = fHRTIM / 16 */
+#define HRTIM_CHOPPER_DUTYCYCLE_875 (HRTIM_CHPR_CARDTY_2 | HRTIM_CHPR_CARDTY_1 | HRTIM_CHPR_CARDTY_0) /*!< 7/8 (87.5 %) */ /*!< fCHPFRQ = fHRTIM / 16 */
+
+#define IS_HRTIM_CHOPPER_DUTYCYCLE(DUTYCYCLE)\
+ (((DUTYCYCLE) == HRTIM_CHOPPER_DUTYCYCLE_0) || \
+ ((DUTYCYCLE) == HRTIM_CHOPPER_DUTYCYCLE_125) || \
+ ((DUTYCYCLE) == HRTIM_CHOPPER_DUTYCYCLE_250) || \
+ ((DUTYCYCLE) == HRTIM_CHOPPER_DUTYCYCLE_375) || \
+ ((DUTYCYCLE) == HRTIM_CHOPPER_DUTYCYCLE_500) || \
+ ((DUTYCYCLE) == HRTIM_CHOPPER_DUTYCYCLE_625) || \
+ ((DUTYCYCLE) == HRTIM_CHOPPER_DUTYCYCLE_750) || \
+ ((DUTYCYCLE) == HRTIM_CHOPPER_DUTYCYCLE_875))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Chopper_Start_Pulse_Width HRTIM Chopper Start Pulse Width
+ * @{
+ * @brief Constants defining the pulse width of the first pulse of the generated
+ * high frequency carrier
+ */
+#define HRTIM_CHOPPER_PULSEWIDTH_16 ((uint32_t)0x000000) /*!< tSTPW = tHRTIM x 16 */
+#define HRTIM_CHOPPER_PULSEWIDTH_32 (HRTIM_CHPR_STRPW_0) /*!< tSTPW = tHRTIM x 32 */
+#define HRTIM_CHOPPER_PULSEWIDTH_48 (HRTIM_CHPR_STRPW_1) /*!< tSTPW = tHRTIM x 48 */
+#define HRTIM_CHOPPER_PULSEWIDTH_64 (HRTIM_CHPR_STRPW_1 | HRTIM_CHPR_STRPW_0) /*!< tSTPW = tHRTIM x 64 */
+#define HRTIM_CHOPPER_PULSEWIDTH_80 (HRTIM_CHPR_STRPW_2) /*!< tSTPW = tHRTIM x 80 */
+#define HRTIM_CHOPPER_PULSEWIDTH_96 (HRTIM_CHPR_STRPW_2 | HRTIM_CHPR_STRPW_0) /*!< tSTPW = tHRTIM x 96 */
+#define HRTIM_CHOPPER_PULSEWIDTH_112 (HRTIM_CHPR_STRPW_2 | HRTIM_CHPR_STRPW_1) /*!< tSTPW = tHRTIM x 112 */
+#define HRTIM_CHOPPER_PULSEWIDTH_128 (HRTIM_CHPR_STRPW_2 | HRTIM_CHPR_STRPW_1 | HRTIM_CHPR_STRPW_0) /*!< tSTPW = tHRTIM x 128 */
+#define HRTIM_CHOPPER_PULSEWIDTH_144 (HRTIM_CHPR_STRPW_3) /*!< tSTPW = tHRTIM x 144 */
+#define HRTIM_CHOPPER_PULSEWIDTH_160 (HRTIM_CHPR_STRPW_3 | HRTIM_CHPR_STRPW_0) /*!< tSTPW = tHRTIM x 160 */
+#define HRTIM_CHOPPER_PULSEWIDTH_176 (HRTIM_CHPR_STRPW_3 | HRTIM_CHPR_STRPW_1) /*!< tSTPW = tHRTIM x 176 */
+#define HRTIM_CHOPPER_PULSEWIDTH_192 (HRTIM_CHPR_STRPW_3 | HRTIM_CHPR_STRPW_1 | HRTIM_CHPR_STRPW_0) /*!< tSTPW = tHRTIM x 192 */
+#define HRTIM_CHOPPER_PULSEWIDTH_208 (HRTIM_CHPR_STRPW_3 | HRTIM_CHPR_STRPW_2) /*!< tSTPW = tHRTIM x 208 */
+#define HRTIM_CHOPPER_PULSEWIDTH_224 (HRTIM_CHPR_STRPW_3 | HRTIM_CHPR_STRPW_2 | HRTIM_CHPR_STRPW_0) /*!< tSTPW = tHRTIM x 224 */
+#define HRTIM_CHOPPER_PULSEWIDTH_240 (HRTIM_CHPR_STRPW_3 | HRTIM_CHPR_STRPW_2 | HRTIM_CHPR_STRPW_1) /*!< tSTPW = tHRTIM x 240 */
+#define HRTIM_CHOPPER_PULSEWIDTH_256 (HRTIM_CHPR_STRPW_3 | HRTIM_CHPR_STRPW_2 | HRTIM_CHPR_STRPW_1 | HRTIM_CHPR_STRPW_0) /*!< tSTPW = tHRTIM x 256 */
+
+#define IS_HRTIM_CHOPPER_PULSEWIDTH(PULSEWIDTH)\
+ (((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_16) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_32) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_48) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_64) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_80) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_96) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_112) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_128) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_144) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_160) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_176) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_192) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_208) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_224) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_240) || \
+ ((PULSEWIDTH) == HRTIM_CHOPPER_PULSEWIDTH_256))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Synchronization_Options HRTIM Synchronization Options
+ * @{
+ * @brief Constants defining the options for synchronizing multiple HRTIM
+ * instances, as a master unit (generating a synchronization signal)
+ * or as a slave (waiting for a trigger to be synchronized)
+ */
+#define HRTIM_SYNCOPTION_NONE (uint32_t)0x00000000 /*!< HRTIM instance doesn't handle external synchronization signals (SYNCIN, SYNCOUT) */
+#define HRTIM_SYNCOPTION_MASTER (uint32_t)0x00000001 /*!< HRTIM instance acts as a MASTER, i.e. generates external synchronization output (SYNCOUT)*/
+#define HRTIM_SYNCOPTION_SLAVE (uint32_t)0x00000002 /*!< HRTIM instance acts as a SLAVE, i.e. it is synchronized by external sources (SYNCIN) */
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Synchronization_Input_Source HRTIM Synchronization Input Source
+ * @{
+ * @brief Constants defining defining the synchronization input source
+ */
+#define HRTIM_SYNCINPUTSOURCE_NONE (uint32_t)0x00000000 /*!< disabled. HRTIM is not synchronized and runs in standalone mode */
+#define HRTIM_SYNCINPUTSOURCE_INTERNALEVENT HRTIM_MCR_SYNC_IN_1 /*!< The HRTIM is synchronized with the on-chip timer */
+#define HRTIM_SYNCINPUTSOURCE_EXTERNALEVENT (HRTIM_MCR_SYNC_IN_1 | HRTIM_MCR_SYNC_IN_0) /*!< A positive pulse on SYNCIN input triggers the HRTIM */
+
+#define IS_HRTIM_SYNCINPUTSOURCE(SYNCINPUTSOURCE)\
+ (((SYNCINPUTSOURCE) == HRTIM_SYNCINPUTSOURCE_NONE) || \
+ ((SYNCINPUTSOURCE) == HRTIM_SYNCINPUTSOURCE_INTERNALEVENT) || \
+ ((SYNCINPUTSOURCE) == HRTIM_SYNCINPUTSOURCE_EXTERNALEVENT))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Synchronization_Output_Source HRTIM Synchronization Output Source
+ * @{
+ * @brief Constants defining the source and event to be sent on the
+ * synchronization outputs
+ */
+#define HRTIM_SYNCOUTPUTSOURCE_MASTER_START (uint32_t)0x00000000 /*!< A pulse is sent on the SYNCOUT output (16x fHRTIM clock cycles) upon master timer start event */
+#define HRTIM_SYNCOUTPUTSOURCE_MASTER_CMP1 (HRTIM_MCR_SYNC_SRC_0) /*!< A pulse is sent on the SYNCOUT output (16x fHRTIM clock cycles) upon master timer compare 1 event*/
+#define HRTIM_SYNCOUTPUTSOURCE_TIMA_START (HRTIM_MCR_SYNC_SRC_1) /*!< A pulse is sent on the SYNCOUT output (16x fHRTIM clock cycles) upon timer A start or reset events */
+#define HRTIM_SYNCOUTPUTSOURCE_TIMA_CMP1 (HRTIM_MCR_SYNC_SRC_1 | HRTIM_MCR_SYNC_SRC_0) /*!< A pulse is sent on the SYNCOUT output (16x fHRTIM clock cycles) upon timer A compare 1 event */
+
+#define IS_HRTIM_SYNCOUTPUTSOURCE(SYNCOUTPUTSOURCE)\
+ (((SYNCOUTPUTSOURCE) == HRTIM_SYNCOUTPUTSOURCE_MASTER_START) || \
+ ((SYNCOUTPUTSOURCE) == HRTIM_SYNCOUTPUTSOURCE_MASTER_CMP1) || \
+ ((SYNCOUTPUTSOURCE) == HRTIM_SYNCOUTPUTSOURCE_TIMA_START) || \
+ ((SYNCOUTPUTSOURCE) == HRTIM_SYNCOUTPUTSOURCE_TIMA_CMP1))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Synchronization_Output_Polarity HRTIM Synchronization Output Polarity
+ * @{
+ * @brief Constants defining the routing and conditioning of the synchronization output event
+ */
+#define HRTIM_SYNCOUTPUTPOLARITY_NONE (uint32_t)0x00000000 /*!< Synchronization output event is disabled */
+#define HRTIM_SYNCOUTPUTPOLARITY_POSITIVE (HRTIM_MCR_SYNC_OUT_1) /*!< Positive pulse on SCOUT output (16x fHRTIM clock cycles) */
+#define HRTIM_SYNCOUTPUTPOLARITY_NEGATIVE (HRTIM_MCR_SYNC_OUT_1 | HRTIM_MCR_SYNC_OUT_0) /*!< Positive pulse on SCOUT output (16x fHRTIM clock cycles) */
+
+#define IS_HRTIM_SYNCOUTPUTPOLARITY(SYNCOUTPUTPOLARITY)\
+ (((SYNCOUTPUTPOLARITY) == HRTIM_SYNCOUTPUTPOLARITY_NONE) || \
+ ((SYNCOUTPUTPOLARITY) == HRTIM_SYNCOUTPUTPOLARITY_POSITIVE) || \
+ ((SYNCOUTPUTPOLARITY) == HRTIM_SYNCOUTPUTPOLARITY_NEGATIVE))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_External_Event_Sources HRTIM External Event Sources
+ * @{
+ * @brief Constants defining available sources associated to external events
+ */
+#define HRTIM_EVENTSRC_1 ((uint32_t)0x00000000) /*!< External event source 1 */
+#define HRTIM_EVENTSRC_2 (HRTIM_EECR1_EE1SRC_0) /*!< External event source 2 */
+#define HRTIM_EVENTSRC_3 (HRTIM_EECR1_EE1SRC_1) /*!< External event source 3 */
+#define HRTIM_EVENTSRC_4 (HRTIM_EECR1_EE1SRC_1 | HRTIM_EECR1_EE1SRC_0) /*!< External event source 4 */
+
+#define IS_HRTIM_EVENTSRC(EVENTSRC)\
+ (((EVENTSRC) == HRTIM_EVENTSRC_1) || \
+ ((EVENTSRC) == HRTIM_EVENTSRC_2) || \
+ ((EVENTSRC) == HRTIM_EVENTSRC_3) || \
+ ((EVENTSRC) == HRTIM_EVENTSRC_4))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_External_Event_Polarity HRTIM External Event Polarity
+ * @{
+ * @brief Constants defining the polarity of an external event
+ */
+#define HRTIM_EVENTPOLARITY_HIGH ((uint32_t)0x00000000) /*!< External event is active high */
+#define HRTIM_EVENTPOLARITY_LOW (HRTIM_EECR1_EE1POL) /*!< External event is active low */
+
+#define IS_HRTIM_EVENTPOLARITY(EVENTSENSITIVITY, EVENTPOLARITY)\
+ ((((EVENTSENSITIVITY) == HRTIM_EVENTSENSITIVITY_LEVEL) && \
+ (((EVENTPOLARITY) == HRTIM_EVENTPOLARITY_HIGH) || \
+ ((EVENTPOLARITY) == HRTIM_EVENTPOLARITY_LOW))) \
+ || \
+ (((EVENTSENSITIVITY) == HRTIM_EVENTSENSITIVITY_RISINGEDGE) || \
+ ((EVENTSENSITIVITY) == HRTIM_EVENTSENSITIVITY_FALLINGEDGE)|| \
+ ((EVENTSENSITIVITY) == HRTIM_EVENTSENSITIVITY_BOTHEDGES)))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_External_Event_Sensitivity HRTIM External Event Sensitivity
+ * @{
+ * @brief Constants defining the sensitivity (level-sensitive or edge-sensitive)
+ * of an external event
+ */
+#define HRTIM_EVENTSENSITIVITY_LEVEL ((uint32_t)0x00000000) /*!< External event is active on level */
+#define HRTIM_EVENTSENSITIVITY_RISINGEDGE (HRTIM_EECR1_EE1SNS_0) /*!< External event is active on Rising edge */
+#define HRTIM_EVENTSENSITIVITY_FALLINGEDGE (HRTIM_EECR1_EE1SNS_1) /*!< External event is active on Falling edge */
+#define HRTIM_EVENTSENSITIVITY_BOTHEDGES (HRTIM_EECR1_EE1SNS_1 | HRTIM_EECR1_EE1SNS_0) /*!< External event is active on Rising and Falling edges */
+
+#define IS_HRTIM_EVENTSENSITIVITY(EVENTSENSITIVITY)\
+ (((EVENTSENSITIVITY) == HRTIM_EVENTSENSITIVITY_LEVEL) || \
+ ((EVENTSENSITIVITY) == HRTIM_EVENTSENSITIVITY_RISINGEDGE) || \
+ ((EVENTSENSITIVITY) == HRTIM_EVENTSENSITIVITY_FALLINGEDGE) || \
+ ((EVENTSENSITIVITY) == HRTIM_EVENTSENSITIVITY_BOTHEDGES))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_External_Event_Fast_Mode HRTIM External Event Fast Mode
+ * @{
+ * @brief Constants defining whether or not an external event is programmed in
+ fast mode
+ */
+#define HRTIM_EVENTFASTMODE_DISABLE ((uint32_t)0x00000000) /*!< External Event is acting asynchronously on outputs (low latency mode) */
+#define HRTIM_EVENTFASTMODE_ENABLE (HRTIM_EECR1_EE1FAST) /*!< External Event is re-synchronized by the HRTIM logic before acting on outputs */
+
+#define IS_HRTIM_EVENTFASTMODE(EVENT, FASTMODE)\
+ (((((EVENT) == HRTIM_EVENT_1) || \
+ ((EVENT) == HRTIM_EVENT_2) || \
+ ((EVENT) == HRTIM_EVENT_3) || \
+ ((EVENT) == HRTIM_EVENT_4) || \
+ ((EVENT) == HRTIM_EVENT_5)) && \
+ (((FASTMODE) == HRTIM_EVENTFASTMODE_ENABLE) || \
+ ((FASTMODE) == HRTIM_EVENTFASTMODE_DISABLE))) \
+ || \
+ (((EVENT) == HRTIM_EVENT_6) || \
+ ((EVENT) == HRTIM_EVENT_7) || \
+ ((EVENT) == HRTIM_EVENT_8) || \
+ ((EVENT) == HRTIM_EVENT_9) || \
+ ((EVENT) == HRTIM_EVENT_10)))
+
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_External_Event_Filter HRTIM External Event Filter
+ * @{
+ * @brief Constants defining the frequency used to sample an external event 6
+ * input and the length (N) of the digital filter applied
+ */
+#define HRTIM_EVENTFILTER_NONE ((uint32_t)0x00000000) /*!< Filter disabled */
+#define HRTIM_EVENTFILTER_1 (HRTIM_EECR3_EE6F_0) /*!< fSAMPLING= fHRTIM, N=2 */
+#define HRTIM_EVENTFILTER_2 (HRTIM_EECR3_EE6F_1) /*!< fSAMPLING= fHRTIM, N=4 */
+#define HRTIM_EVENTFILTER_3 (HRTIM_EECR3_EE6F_1 | HRTIM_EECR3_EE6F_0) /*!< fSAMPLING= fHRTIM, N=8 */
+#define HRTIM_EVENTFILTER_4 (HRTIM_EECR3_EE6F_2) /*!< fSAMPLING= fEEVS/2, N=6 */
+#define HRTIM_EVENTFILTER_5 (HRTIM_EECR3_EE6F_2 | HRTIM_EECR3_EE6F_0) /*!< fSAMPLING= fEEVS/2, N=8 */
+#define HRTIM_EVENTFILTER_6 (HRTIM_EECR3_EE6F_2 | HRTIM_EECR3_EE6F_1) /*!< fSAMPLING= fEEVS/4, N=6 */
+#define HRTIM_EVENTFILTER_7 (HRTIM_EECR3_EE6F_2 | HRTIM_EECR3_EE6F_1 | HRTIM_EECR3_EE6F_0) /*!< fSAMPLING= fEEVS/4, N=8 */
+#define HRTIM_EVENTFILTER_8 (HRTIM_EECR3_EE6F_3) /*!< fSAMPLING= fEEVS/8, N=6 */
+#define HRTIM_EVENTFILTER_9 (HRTIM_EECR3_EE6F_3 | HRTIM_EECR3_EE6F_0) /*!< fSAMPLING= fEEVS/8, N=8 */
+#define HRTIM_EVENTFILTER_10 (HRTIM_EECR3_EE6F_3 | HRTIM_EECR3_EE6F_1) /*!< fSAMPLING= fEEVS/16, N=5 */
+#define HRTIM_EVENTFILTER_11 (HRTIM_EECR3_EE6F_3 | HRTIM_EECR3_EE6F_1 | HRTIM_EECR3_EE6F_0) /*!< fSAMPLING= fEEVS/16, N=6 */
+#define HRTIM_EVENTFILTER_12 (HRTIM_EECR3_EE6F_3 | HRTIM_EECR3_EE6F_2) /*!< fSAMPLING= fEEVS/16, N=8 */
+#define HRTIM_EVENTFILTER_13 (HRTIM_EECR3_EE6F_3 | HRTIM_EECR3_EE6F_2 | HRTIM_EECR3_EE6F_0) /*!< fSAMPLING= fEEVS/32, N=5 */
+#define HRTIM_EVENTFILTER_14 (HRTIM_EECR3_EE6F_3 | HRTIM_EECR3_EE6F_2 | HRTIM_EECR3_EE6F_1) /*!< fSAMPLING= fEEVS/32, N=6 */
+#define HRTIM_EVENTFILTER_15 (HRTIM_EECR3_EE6F_3 | HRTIM_EECR3_EE6F_2 | HRTIM_EECR3_EE6F_1 | HRTIM_EECR3_EE6F_0) /*!< fSAMPLING= fEEVS/32, N=8 */
+
+#define IS_HRTIM_EVENTFILTER(EVENT, FILTER)\
+ ((((EVENT) == HRTIM_EVENT_1) || \
+ ((EVENT) == HRTIM_EVENT_2) || \
+ ((EVENT) == HRTIM_EVENT_3) || \
+ ((EVENT) == HRTIM_EVENT_4) || \
+ ((EVENT) == HRTIM_EVENT_5)) \
+ || \
+ ((((EVENT) == HRTIM_EVENT_6) || \
+ ((EVENT) == HRTIM_EVENT_7) || \
+ ((EVENT) == HRTIM_EVENT_8) || \
+ ((EVENT) == HRTIM_EVENT_9) || \
+ ((EVENT) == HRTIM_EVENT_10)) && \
+ (((FILTER) == HRTIM_EVENTFILTER_NONE) || \
+ ((FILTER) == HRTIM_EVENTFILTER_1) || \
+ ((FILTER) == HRTIM_EVENTFILTER_2) || \
+ ((FILTER) == HRTIM_EVENTFILTER_3) || \
+ ((FILTER) == HRTIM_EVENTFILTER_4) || \
+ ((FILTER) == HRTIM_EVENTFILTER_5) || \
+ ((FILTER) == HRTIM_EVENTFILTER_6) || \
+ ((FILTER) == HRTIM_EVENTFILTER_7) || \
+ ((FILTER) == HRTIM_EVENTFILTER_8) || \
+ ((FILTER) == HRTIM_EVENTFILTER_9) || \
+ ((FILTER) == HRTIM_EVENTFILTER_10) || \
+ ((FILTER) == HRTIM_EVENTFILTER_11) || \
+ ((FILTER) == HRTIM_EVENTFILTER_12) || \
+ ((FILTER) == HRTIM_EVENTFILTER_13) || \
+ ((FILTER) == HRTIM_EVENTFILTER_14) || \
+ ((FILTER) == HRTIM_EVENTFILTER_15))))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_External_Event_Prescaler HRTIM External Event Prescaler
+ * @{
+ * @brief Constants defining division ratio between the timer clock frequency
+ * fHRTIM) and the external event signal sampling clock (fEEVS)
+ * used by the digital filters
+ */
+#define HRTIM_EVENTPRESCALER_DIV1 ((uint32_t)0x00000000) /*!< fEEVS=fHRTIM */
+#define HRTIM_EVENTPRESCALER_DIV2 (HRTIM_EECR3_EEVSD_0) /*!< fEEVS=fHRTIM / 2 */
+#define HRTIM_EVENTPRESCALER_DIV4 (HRTIM_EECR3_EEVSD_1) /*!< fEEVS=fHRTIM / 4 */
+#define HRTIM_EVENTPRESCALER_DIV8 (HRTIM_EECR3_EEVSD_1 | HRTIM_EECR3_EEVSD_0) /*!< fEEVS=fHRTIM / 8 */
+
+#define IS_HRTIM_EVENTPRESCALER(EVENTPRESCALER)\
+ (((EVENTPRESCALER) == HRTIM_EVENTPRESCALER_DIV1) || \
+ ((EVENTPRESCALER) == HRTIM_EVENTPRESCALER_DIV2) || \
+ ((EVENTPRESCALER) == HRTIM_EVENTPRESCALER_DIV4) || \
+ ((EVENTPRESCALER) == HRTIM_EVENTPRESCALER_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Fault_Sources HRTIM Fault Sources
+ * @{
+ * @brief Constants defining whether a faults is be triggered by any external
+ * or internal fault source
+ */
+#define HRTIM_FAULTSOURCE_DIGITALINPUT ((uint32_t)0x00000000) /*!< Fault input is FLT input pin */
+#define HRTIM_FAULTSOURCE_INTERNAL (HRTIM_FLTINR1_FLT1SRC) /*!< Fault input is FLT_Int signal (e.g. internal comparator) */
+
+
+#define IS_HRTIM_FAULTSOURCE(FAULTSOURCE)\
+ (((FAULTSOURCE) == HRTIM_FAULTSOURCE_DIGITALINPUT) || \
+ ((FAULTSOURCE) == HRTIM_FAULTSOURCE_INTERNAL))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Fault_Polarity HRTIM Fault Polarity
+ * @{
+ * @brief Constants defining the polarity of a fault event
+ */
+#define HRTIM_FAULTPOLARITY_LOW ((uint32_t)0x00000000) /*!< Fault input is active low */
+#define HRTIM_FAULTPOLARITY_HIGH (HRTIM_FLTINR1_FLT1P) /*!< Fault input is active high */
+
+#define IS_HRTIM_FAULTPOLARITY(HRTIM_FAULTPOLARITY)\
+ (((HRTIM_FAULTPOLARITY) == HRTIM_FAULTPOLARITY_LOW) || \
+ ((HRTIM_FAULTPOLARITY) == HRTIM_FAULTPOLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Fault_Filter HRTIM Fault Filter
+ * @{
+ * @ brief Constants defining the frequency used to sample the fault input and
+ * the length (N) of the digital filter applied
+ */
+#define HRTIM_FAULTFILTER_NONE ((uint32_t)0x00000000) /*!< Filter disabled */
+#define HRTIM_FAULTFILTER_1 (HRTIM_FLTINR1_FLT1F_0) /*!< fSAMPLING= fHRTIM, N=2 */
+#define HRTIM_FAULTFILTER_2 (HRTIM_FLTINR1_FLT1F_1) /*!< fSAMPLING= fHRTIM, N=4 */
+#define HRTIM_FAULTFILTER_3 (HRTIM_FLTINR1_FLT1F_1 | HRTIM_FLTINR1_FLT1F_0) /*!< fSAMPLING= fHRTIM, N=8 */
+#define HRTIM_FAULTFILTER_4 (HRTIM_FLTINR1_FLT1F_2) /*!< fSAMPLING= fFLTS/2, N=6 */
+#define HRTIM_FAULTFILTER_5 (HRTIM_FLTINR1_FLT1F_2 | HRTIM_FLTINR1_FLT1F_0) /*!< fSAMPLING= fFLTS/2, N=8 */
+#define HRTIM_FAULTFILTER_6 (HRTIM_FLTINR1_FLT1F_2 | HRTIM_FLTINR1_FLT1F_1) /*!< fSAMPLING= fFLTS/4, N=6 */
+#define HRTIM_FAULTFILTER_7 (HRTIM_FLTINR1_FLT1F_2 | HRTIM_FLTINR1_FLT1F_1 | HRTIM_FLTINR1_FLT1F_0) /*!< fSAMPLING= fFLTS/4, N=8 */
+#define HRTIM_FAULTFILTER_8 (HRTIM_FLTINR1_FLT1F_3) /*!< fSAMPLING= fFLTS/8, N=6 */
+#define HRTIM_FAULTFILTER_9 (HRTIM_FLTINR1_FLT1F_3 | HRTIM_FLTINR1_FLT1F_0) /*!< fSAMPLING= fFLTS/8, N=8 */
+#define HRTIM_FAULTFILTER_10 (HRTIM_FLTINR1_FLT1F_3 | HRTIM_FLTINR1_FLT1F_1) /*!< fSAMPLING= fFLTS/16, N=5 */
+#define HRTIM_FAULTFILTER_11 (HRTIM_FLTINR1_FLT1F_3 | HRTIM_FLTINR1_FLT1F_1 | HRTIM_FLTINR1_FLT1F_0) /*!< fSAMPLING= fFLTS/16, N=6 */
+#define HRTIM_FAULTFILTER_12 (HRTIM_FLTINR1_FLT1F_3 | HRTIM_FLTINR1_FLT1F_2) /*!< fSAMPLING= fFLTS/16, N=8 */
+#define HRTIM_FAULTFILTER_13 (HRTIM_FLTINR1_FLT1F_3 | HRTIM_FLTINR1_FLT1F_2 | HRTIM_FLTINR1_FLT1F_0) /*!< fSAMPLING= fFLTS/32, N=5 */
+#define HRTIM_FAULTFILTER_14 (HRTIM_FLTINR1_FLT1F_3 | HRTIM_FLTINR1_FLT1F_2 | HRTIM_FLTINR1_FLT1F_1) /*!< fSAMPLING= fFLTS/32, N=6 */
+#define HRTIM_FAULTFILTER_15 (HRTIM_FLTINR1_FLT1F_3 | HRTIM_FLTINR1_FLT1F_2 | HRTIM_FLTINR1_FLT1F_1 | HRTIM_FLTINR1_FLT1F_0) /*!< fSAMPLING= fFLTS/32, N=8 */
+
+#define IS_HRTIM_FAULTFILTER(FAULTFILTER)\
+ (((FAULTFILTER) == HRTIM_FAULTFILTER_NONE) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_1) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_2) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_3) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_4) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_5) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_6) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_7) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_8) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_9) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_10) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_11) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_12) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_13) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_14) || \
+ ((FAULTFILTER) == HRTIM_FAULTFILTER_15))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Fault_Lock HRTIM Fault Lock
+ * @{
+ * @brief Constants defining whether or not the fault programming bits are
+ write protected
+ */
+#define HRTIM_FAULTLOCK_READWRITE ((uint32_t)0x00000000) /*!< Fault settings bits are read/write */
+#define HRTIM_FAULTLOCK_READONLY (HRTIM_FLTINR1_FLT1LCK) /*!< Fault settings bits are read only */
+
+#define IS_HRTIM_FAULTLOCK(FAULTLOCK)\
+ (((FAULTLOCK) == HRTIM_FAULTLOCK_READWRITE) || \
+ ((FAULTLOCK) == HRTIM_FAULTLOCK_READONLY))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_External_Fault_Prescaler HRTIM External Fault Prescaler
+ * @{
+ * @brief Constants defining the division ratio between the timer clock
+ * frequency (fHRTIM) and the fault signal sampling clock (fFLTS) used
+ * by the digital filters.
+ */
+#define HRTIM_FAULTPRESCALER_DIV1 ((uint32_t)0x00000000) /*!< fFLTS=fHRTIM */
+#define HRTIM_FAULTPRESCALER_DIV2 (HRTIM_FLTINR2_FLTSD_0) /*!< fFLTS=fHRTIM / 2 */
+#define HRTIM_FAULTPRESCALER_DIV4 (HRTIM_FLTINR2_FLTSD_1) /*!< fFLTS=fHRTIM / 4 */
+#define HRTIM_FAULTPRESCALER_DIV8 (HRTIM_FLTINR2_FLTSD_1 | HRTIM_FLTINR2_FLTSD_0) /*!< fFLTS=fHRTIM / 8 */
+
+#define IS_HRTIM_FAULTPRESCALER(FAULTPRESCALER)\
+ (((FAULTPRESCALER) == HRTIM_FAULTPRESCALER_DIV1) || \
+ ((FAULTPRESCALER) == HRTIM_FAULTPRESCALER_DIV2) || \
+ ((FAULTPRESCALER) == HRTIM_FAULTPRESCALER_DIV4) || \
+ ((FAULTPRESCALER) == HRTIM_FAULTPRESCALER_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Burst_Mode_Operating_Mode HRTIM Burst Mode Operating Mode
+ * @{
+ * @brief Constants defining if the burst mode is entered once or if it is
+ * continuously operating
+ */
+#define HRTIM_BURSTMODE_SINGLESHOT ((uint32_t)0x00000000) /*!< Burst mode operates in single shot mode */
+#define HRTIM_BURSTMODE_CONTINOUS (HRTIM_BMCR_BMOM) /*!< Burst mode operates in continuous mode */
+
+#define IS_HRTIM_BURSTMODE(BURSTMODE)\
+ (((BURSTMODE) == HRTIM_BURSTMODE_SINGLESHOT) || \
+ ((BURSTMODE) == HRTIM_BURSTMODE_CONTINOUS))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Burst_Mode_Clock_Source HRTIM Burst Mode Clock Source
+ * @{
+ * @brief Constants defining the clock source for the burst mode counter
+ */
+#define HRTIM_BURSTMODECLOCKSOURCE_MASTER ((uint32_t)0x00000000) /*!< Master timer counter reset/roll-over is used as clock source for the burst mode counter */
+#define HRTIM_BURSTMODECLOCKSOURCE_TIMER_A (HRTIM_BMCR_BMCLK_0) /*!< Timer A counter reset/roll-over is used as clock source for the burst mode counter */
+#define HRTIM_BURSTMODECLOCKSOURCE_TIMER_B (HRTIM_BMCR_BMCLK_1) /*!< Timer B counter reset/roll-over is used as clock source for the burst mode counter */
+#define HRTIM_BURSTMODECLOCKSOURCE_TIMER_C (HRTIM_BMCR_BMCLK_1 | HRTIM_BMCR_BMCLK_0) /*!< Timer C counter reset/roll-over is used as clock source for the burst mode counter */
+#define HRTIM_BURSTMODECLOCKSOURCE_TIMER_D (HRTIM_BMCR_BMCLK_2) /*!< Timer D counter reset/roll-over is used as clock source for the burst mode counter */
+#define HRTIM_BURSTMODECLOCKSOURCE_TIMER_E (HRTIM_BMCR_BMCLK_2 | HRTIM_BMCR_BMCLK_0) /*!< Timer E counter reset/roll-over is used as clock source for the burst mode counter */
+#define HRTIM_BURSTMODECLOCKSOURCE_TIM16_OC (HRTIM_BMCR_BMCLK_2 | HRTIM_BMCR_BMCLK_1) /*!< On-chip Event 1 (BMClk[1]), acting as a burst mode counter clock */
+#define HRTIM_BURSTMODECLOCKSOURCE_TIM17_OC (HRTIM_BMCR_BMCLK_2 | HRTIM_BMCR_BMCLK_1 | HRTIM_BMCR_BMCLK_0) /*!< On-chip Event 2 (BMClk[2]), acting as a burst mode counter clock */
+#define HRTIM_BURSTMODECLOCKSOURCE_TIM7_TRGO (HRTIM_BMCR_BMCLK_3) /*!< On-chip Event 3 (BMClk[3]), acting as a burst mode counter clock */
+#define HRTIM_BURSTMODECLOCKSOURCE_FHRTIM (HRTIM_BMCR_BMCLK_3 | HRTIM_BMCR_BMCLK_1) /*!< Prescaled fHRTIM clock is used as clock source for the burst mode counter */
+
+#define IS_HRTIM_BURSTMODECLOCKSOURCE(BURSTMODECLOCKSOURCE)\
+ (((BURSTMODECLOCKSOURCE) == HRTIM_BURSTMODECLOCKSOURCE_MASTER) || \
+ ((BURSTMODECLOCKSOURCE) == HRTIM_BURSTMODECLOCKSOURCE_TIMER_A) || \
+ ((BURSTMODECLOCKSOURCE) == HRTIM_BURSTMODECLOCKSOURCE_TIMER_B) || \
+ ((BURSTMODECLOCKSOURCE) == HRTIM_BURSTMODECLOCKSOURCE_TIMER_C) || \
+ ((BURSTMODECLOCKSOURCE) == HRTIM_BURSTMODECLOCKSOURCE_TIMER_D) || \
+ ((BURSTMODECLOCKSOURCE) == HRTIM_BURSTMODECLOCKSOURCE_TIMER_E) || \
+ ((BURSTMODECLOCKSOURCE) == HRTIM_BURSTMODECLOCKSOURCE_TIM16_OC) || \
+ ((BURSTMODECLOCKSOURCE) == HRTIM_BURSTMODECLOCKSOURCE_TIM17_OC) || \
+ ((BURSTMODECLOCKSOURCE) == HRTIM_BURSTMODECLOCKSOURCE_TIM7_TRGO) || \
+ ((BURSTMODECLOCKSOURCE) == HRTIM_BURSTMODECLOCKSOURCE_FHRTIM))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Burst_Mode_Prescaler HRTIM Burst Mode Prescaler
+ * @{
+ * @brief Constants defining the prescaling ratio of the fHRTIM clock
+ * for the burst mode controller
+ */
+#define HRTIM_BURSTMODEPRESCALER_DIV1 ((uint32_t)0x00000000) /*!< fBRST = fHRTIM */
+#define HRTIM_BURSTMODEPRESCALER_DIV2 (HRTIM_BMCR_BMPRSC_0) /*!< fBRST = fHRTIM/2 */
+#define HRTIM_BURSTMODEPRESCALER_DIV4 (HRTIM_BMCR_BMPRSC_1) /*!< fBRST = fHRTIM/4 */
+#define HRTIM_BURSTMODEPRESCALER_DIV8 (HRTIM_BMCR_BMPRSC_1 | HRTIM_BMCR_BMPRSC_0) /*!< fBRST = fHRTIM/8 */
+#define HRTIM_BURSTMODEPRESCALER_DIV16 (HRTIM_BMCR_BMPRSC_2) /*!< fBRST = fHRTIM/16 */
+#define HRTIM_BURSTMODEPRESCALER_DIV32 (HRTIM_BMCR_BMPRSC_2 | HRTIM_BMCR_BMPRSC_0) /*!< fBRST = fHRTIM/32 */
+#define HRTIM_BURSTMODEPRESCALER_DIV64 (HRTIM_BMCR_BMPRSC_2 | HRTIM_BMCR_BMPRSC_1) /*!< fBRST = fHRTIM/64 */
+#define HRTIM_BURSTMODEPRESCALER_DIV128 (HRTIM_BMCR_BMPRSC_2 | HRTIM_BMCR_BMPRSC_1 | HRTIM_BMCR_BMPRSC_0) /*!< fBRST = fHRTIM/128 */
+#define HRTIM_BURSTMODEPRESCALER_DIV256 (HRTIM_BMCR_BMPRSC_3) /*!< fBRST = fHRTIM/256 */
+#define HRTIM_BURSTMODEPRESCALER_DIV512 (HRTIM_BMCR_BMPRSC_3 | HRTIM_BMCR_BMPRSC_0) /*!< fBRST = fHRTIM/512 */
+#define HRTIM_BURSTMODEPRESCALER_DIV1024 (HRTIM_BMCR_BMPRSC_3 | HRTIM_BMCR_BMPRSC_1) /*!< fBRST = fHRTIM/1024 */
+#define HRTIM_BURSTMODEPRESCALER_DIV2048 (HRTIM_BMCR_BMPRSC_3 | HRTIM_BMCR_BMPRSC_1 | HRTIM_BMCR_BMPRSC_0) /*!< fBRST = fHRTIM/2048*/
+#define HRTIM_BURSTMODEPRESCALER_DIV4096 (HRTIM_BMCR_BMPRSC_3 | HRTIM_BMCR_BMPRSC_2) /*!< fBRST = fHRTIM/4096 */
+#define HRTIM_BURSTMODEPRESCALER_DIV8192 (HRTIM_BMCR_BMPRSC_3 | HRTIM_BMCR_BMPRSC_2 | HRTIM_BMCR_BMPRSC_0) /*!< fBRST = fHRTIM/8192 */
+#define HRTIM_BURSTMODEPRESCALER_DIV16384 (HRTIM_BMCR_BMPRSC_3 | HRTIM_BMCR_BMPRSC_2 | HRTIM_BMCR_BMPRSC_1) /*!< fBRST = fHRTIM/16384 */
+#define HRTIM_BURSTMODEPRESCALER_DIV32768 (HRTIM_BMCR_BMPRSC_3 | HRTIM_BMCR_BMPRSC_2 | HRTIM_BMCR_BMPRSC_1 | HRTIM_BMCR_BMPRSC_0) /*!< fBRST = fHRTIM/32768 */
+
+#define IS_HRTIM_HRTIM_BURSTMODEPRESCALER(BURSTMODEPRESCALER)\
+ (((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV1) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV2) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV4) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV8) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV16) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV32) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV64) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV128) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV256) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV512) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV1024) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV2048) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV4096) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV8192) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV16384) || \
+ ((BURSTMODEPRESCALER) == HRTIM_BURSTMODEPRESCALER_DIV32768))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Burst_Mode_Register_Preload_Enable HRTIM Burst Mode Register Preload Enable
+ * @{
+ * @brief Constants defining whether or not burst mode registers preload
+ mechanism is enabled, i.e. a write access into a preloadable register
+ (HRTIM_BMCMPR, HRTIM_BMPER) is done into the active or the preload register
+ */
+#define HRIM_BURSTMODEPRELOAD_DISABLED ((uint32_t)0x00000000) /*!< Preload disabled: the write access is directly done into active registers */
+#define HRIM_BURSTMODEPRELOAD_ENABLED (HRTIM_BMCR_BMPREN) /*!< Preload enabled: the write access is done into preload registers */
+
+#define IS_HRTIM_BURSTMODEPRELOAD(BURSTMODEPRELOAD)\
+ (((BURSTMODEPRELOAD) == HRIM_BURSTMODEPRELOAD_DISABLED) || \
+ ((BURSTMODEPRELOAD) == HRIM_BURSTMODEPRELOAD_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Burst_Mode_Trigger HRTIM Burst Mode Trigger
+ * @{
+ * @brief Constants defining the events that can be used tor trig the burst
+ * mode operation
+ */
+#define HRTIM_BURSTMODETRIGGER_NONE (uint32_t)0x00000000 /*!< No trigger */
+#define HRTIM_BURSTMODETRIGGER_MASTER_RESET (HRTIM_BMTRGR_MSTRST) /*!< Master reset */
+#define HRTIM_BURSTMODETRIGGER_MASTER_REPETITION (HRTIM_BMTRGR_MSTREP) /*!< Master repetition */
+#define HRTIM_BURSTMODETRIGGER_MASTER_CMP1 (HRTIM_BMTRGR_MSTCMP1) /*!< Master compare 1 */
+#define HRTIM_BURSTMODETRIGGER_MASTER_CMP2 (HRTIM_BMTRGR_MSTCMP2) /*!< Master compare 2 */
+#define HRTIM_BURSTMODETRIGGER_MASTER_CMP3 (HRTIM_BMTRGR_MSTCMP3) /*!< Master compare 3 */
+#define HRTIM_BURSTMODETRIGGER_MASTER_CMP4 (HRTIM_BMTRGR_MSTCMP4) /*!< Master compare 4 */
+#define HRTIM_BURSTMODETRIGGER_TIMERA_RESET (HRTIM_BMTRGR_TARST) /*!< Timer A reset */
+#define HRTIM_BURSTMODETRIGGER_TIMERA_REPETITION (HRTIM_BMTRGR_TAREP) /*!< Timer A repetition */
+#define HRTIM_BURSTMODETRIGGER_TIMERA_CMP1 (HRTIM_BMTRGR_TACMP1) /*!< Timer A compare 1 */
+#define HRTIM_BURSTMODETRIGGER_TIMERA_CMP2 (HRTIM_BMTRGR_TACMP2) /*!< Timer A compare 2 */
+#define HRTIM_BURSTMODETRIGGER_TIMERB_RESET (HRTIM_BMTRGR_TBRST) /*!< Timer B reset */
+#define HRTIM_BURSTMODETRIGGER_TIMERB_REPETITION (HRTIM_BMTRGR_TBREP) /*!< Timer B repetition */
+#define HRTIM_BURSTMODETRIGGER_TIMERB_CMP1 (HRTIM_BMTRGR_TBCMP1) /*!< Timer B compare 1 */
+#define HRTIM_BURSTMODETRIGGER_TIMERB_CMP2 (HRTIM_BMTRGR_TBCMP2) /*!< Timer B compare 2 */
+#define HRTIM_BURSTMODETRIGGER_TIMERC_RESET (HRTIM_BMTRGR_TCRST) /*!< Timer C reset */
+#define HRTIM_BURSTMODETRIGGER_TIMERC_REPETITION (HRTIM_BMTRGR_TCREP) /*!< Timer C repetition */
+#define HRTIM_BURSTMODETRIGGER_TIMERC_CMP1 (HRTIM_BMTRGR_TCCMP1) /*!< Timer C compare 1 */
+#define HRTIM_BURSTMODETRIGGER_TIMERC_CMP2 (HRTIM_BMTRGR_TCCMP2) /*!< Timer C compare 2 */
+#define HRTIM_BURSTMODETRIGGER_TIMERD_RESET (HRTIM_BMTRGR_TDRST) /*!< Timer D reset */
+#define HRTIM_BURSTMODETRIGGER_TIMERD_REPETITION (HRTIM_BMTRGR_TDREP) /*!< Timer D repetition */
+#define HRTIM_BURSTMODETRIGGER_TIMERD_CMP1 (HRTIM_BMTRGR_TDCMP1) /*!< Timer D compare 1 */
+#define HRTIM_BURSTMODETRIGGER_TIMERD_CMP2 (HRTIM_BMTRGR_TDCMP2) /*!< Timer D compare 2 */
+#define HRTIM_BURSTMODETRIGGER_TIMERE_RESET (HRTIM_BMTRGR_TERST) /*!< Timer E reset */
+#define HRTIM_BURSTMODETRIGGER_TIMERE_REPETITION (HRTIM_BMTRGR_TEREP) /*!< Timer E repetition */
+#define HRTIM_BURSTMODETRIGGER_TIMERE_CMP1 (HRTIM_BMTRGR_TECMP1) /*!< Timer E compare 1 */
+#define HRTIM_BURSTMODETRIGGER_TIMERE_CMP2 (HRTIM_BMTRGR_TECMP2) /*!< Timer E compare 2 */
+#define HRTIM_BURSTMODETRIGGER_TIMERA_EVENT7 (HRTIM_BMTRGR_TAEEV7) /*!< Timer A period following External Event 7 */
+#define HRTIM_BURSTMODETRIGGER_TIMERD_EVENT8 (HRTIM_BMTRGR_TDEEV8) /*!< Timer D period following External Event 8 */
+#define HRTIM_BURSTMODETRIGGER_EVENT_7 (HRTIM_BMTRGR_EEV7) /*!< External Event 7 (timer A filters applied) */
+#define HRTIM_BURSTMODETRIGGER_EVENT_8 (HRTIM_BMTRGR_EEV8) /*!< External Event 8 (timer D filters applied)*/
+#define HRTIM_BURSTMODETRIGGER_EVENT_ONCHIP (HRTIM_BMTRGR_OCHPEV) /*!< On-chip Event */
+
+#define IS_HRTIM_BURSTMODETRIGGER(BURSTMODETRIGGER)\
+ (((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_NONE) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_MASTER_RESET) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_MASTER_REPETITION) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_MASTER_CMP1) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_MASTER_CMP2) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_MASTER_CMP3) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_MASTER_CMP4) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERA_RESET) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERA_REPETITION) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERA_CMP1) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERA_CMP2) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERB_RESET) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERB_REPETITION) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERB_CMP1) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERB_CMP2) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERC_RESET) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERC_REPETITION) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERC_CMP1) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERC_CMP2) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERD_RESET) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERD_REPETITION) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERD_CMP1) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERD_CMP2) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERE_RESET) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERE_REPETITION) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERE_CMP1) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERE_CMP2) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERA_EVENT7) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_TIMERD_EVENT8) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_EVENT_7) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_EVENT_8) || \
+ ((BURSTMODETRIGGER) == HRTIM_BURSTMODETRIGGER_EVENT_ONCHIP))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_ADC_Trigger_Update_Source HRTIM ADC Trigger Update Source
+ * @{
+ * @brief constants defining the source triggering the update of the
+ HRTIM_ADCxR register (transfer from preload to active register).
+ */
+#define HRTIM_ADCTRIGGERUPDATE_MASTER (uint32_t)0x00000000 /*!< Master timer */
+#define HRTIM_ADCTRIGGERUPDATE_TIMER_A (HRTIM_CR1_ADC1USRC_0) /*!< Timer A */
+#define HRTIM_ADCTRIGGERUPDATE_TIMER_B (HRTIM_CR1_ADC1USRC_1) /*!< Timer B */
+#define HRTIM_ADCTRIGGERUPDATE_TIMER_C (HRTIM_CR1_ADC1USRC_1 | HRTIM_CR1_ADC1USRC_0) /*!< Timer C */
+#define HRTIM_ADCTRIGGERUPDATE_TIMER_D (HRTIM_CR1_ADC1USRC_2) /*!< Timer D */
+#define HRTIM_ADCTRIGGERUPDATE_TIMER_E (HRTIM_CR1_ADC1USRC_2 | HRTIM_CR1_ADC1USRC_0) /*!< Timer E */
+
+#define IS_HRTIM_ADCTRIGGERUPDATE(ADCTRIGGERUPDATE)\
+ (((ADCTRIGGERUPDATE) == HRTIM_ADCTRIGGERUPDATE_MASTER) || \
+ ((ADCTRIGGERUPDATE) == HRTIM_ADCTRIGGERUPDATE_TIMER_A) || \
+ ((ADCTRIGGERUPDATE) == HRTIM_ADCTRIGGERUPDATE_TIMER_B) || \
+ ((ADCTRIGGERUPDATE) == HRTIM_ADCTRIGGERUPDATE_TIMER_C) || \
+ ((ADCTRIGGERUPDATE) == HRTIM_ADCTRIGGERUPDATE_TIMER_D) || \
+ ((ADCTRIGGERUPDATE) == HRTIM_ADCTRIGGERUPDATE_TIMER_E))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_ADC_Trigger_Event HRTIM ADC Trigger Event
+ * @{
+ * @brief constants defining the events triggering ADC conversion.
+ * HRTIM_ADCTRIGGEREVENT13_*: ADC Triggers 1 and 3
+ * HRTIM_ADCTRIGGEREVENT24_*: ADC Triggers 2 and 4
+ */
+#define HRTIM_ADCTRIGGEREVENT13_NONE (uint32_t)0x00000000 /*!< No ADC trigger event */
+#define HRTIM_ADCTRIGGEREVENT13_MASTER_CMP1 (HRTIM_ADC1R_AD1MC1) /*!< ADC Trigger on master compare 1 */
+#define HRTIM_ADCTRIGGEREVENT13_MASTER_CMP2 (HRTIM_ADC1R_AD1MC2) /*!< ADC Trigger on master compare 2 */
+#define HRTIM_ADCTRIGGEREVENT13_MASTER_CMP3 (HRTIM_ADC1R_AD1MC3) /*!< ADC Trigger on master compare 3 */
+#define HRTIM_ADCTRIGGEREVENT13_MASTER_CMP4 (HRTIM_ADC1R_AD1MC4) /*!< ADC Trigger on master compare 4 */
+#define HRTIM_ADCTRIGGEREVENT13_MASTER_PERIOD (HRTIM_ADC1R_AD1MPER) /*!< ADC Trigger on master period */
+#define HRTIM_ADCTRIGGEREVENT13_EVENT_1 (HRTIM_ADC1R_AD1EEV1) /*!< ADC Trigger on external event 1 */
+#define HRTIM_ADCTRIGGEREVENT13_EVENT_2 (HRTIM_ADC1R_AD1EEV2) /*!< ADC Trigger on external event 2 */
+#define HRTIM_ADCTRIGGEREVENT13_EVENT_3 (HRTIM_ADC1R_AD1EEV3) /*!< ADC Trigger on external event 3 */
+#define HRTIM_ADCTRIGGEREVENT13_EVENT_4 (HRTIM_ADC1R_AD1EEV4) /*!< ADC Trigger on external event 4 */
+#define HRTIM_ADCTRIGGEREVENT13_EVENT_5 (HRTIM_ADC1R_AD1EEV5) /*!< ADC Trigger on external event 5 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERA_CMP2 (HRTIM_ADC1R_AD1TAC2) /*!< ADC Trigger on Timer A compare 2 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERA_CMP3 (HRTIM_ADC1R_AD1TAC3) /*!< ADC Trigger on Timer A compare 3 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERA_CMP4 (HRTIM_ADC1R_AD1TAC4) /*!< ADC Trigger on Timer A compare 4 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERA_PERIOD (HRTIM_ADC1R_AD1TAPER) /*!< ADC Trigger on Timer A period */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERA_RESET (HRTIM_ADC1R_AD1TARST) /*!< ADC Trigger on Timer A reset */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERB_CMP2 (HRTIM_ADC1R_AD1TBC2) /*!< ADC Trigger on Timer B compare 2 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERB_CMP3 (HRTIM_ADC1R_AD1TBC3) /*!< ADC Trigger on Timer B compare 3 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERB_CMP4 (HRTIM_ADC1R_AD1TBC4) /*!< ADC Trigger on Timer B compare 4 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERB_PERIOD (HRTIM_ADC1R_AD1TBPER) /*!< ADC Trigger on Timer B period */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERB_RESET (HRTIM_ADC1R_AD1TBRST) /*!< ADC Trigger on Timer B reset */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERC_CMP2 (HRTIM_ADC1R_AD1TCC2) /*!< ADC Trigger on Timer C compare 2 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERC_CMP3 (HRTIM_ADC1R_AD1TCC3) /*!< ADC Trigger on Timer C compare 3 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERC_CMP4 (HRTIM_ADC1R_AD1TCC4) /*!< ADC Trigger on Timer C compare 4 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERC_PERIOD (HRTIM_ADC1R_AD1TCPER) /*!< ADC Trigger on Timer C period */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERD_CMP2 (HRTIM_ADC1R_AD1TDC2) /*!< ADC Trigger on Timer D compare 2 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERD_CMP3 (HRTIM_ADC1R_AD1TDC3) /*!< ADC Trigger on Timer D compare 3 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERD_CMP4 (HRTIM_ADC1R_AD1TDC4) /*!< ADC Trigger on Timer D compare 4 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERD_PERIOD (HRTIM_ADC1R_AD1TDPER) /*!< ADC Trigger on Timer D period */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERE_CMP2 (HRTIM_ADC1R_AD1TEC2) /*!< ADC Trigger on Timer E compare 2 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERE_CMP3 (HRTIM_ADC1R_AD1TEC3) /*!< ADC Trigger on Timer E compare 3 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERE_CMP4 (HRTIM_ADC1R_AD1TEC4) /*!< ADC Trigger on Timer E compare 4 */
+#define HRTIM_ADCTRIGGEREVENT13_TIMERE_PERIOD (HRTIM_ADC1R_AD1TEPER) /*!< ADC Trigger on Timer E period */
+
+#define HRTIM_ADCTRIGGEREVENT24_NONE (uint32_t)0x00000000 /*!< No ADC trigger event */
+#define HRTIM_ADCTRIGGEREVENT24_MASTER_CMP1 (HRTIM_ADC2R_AD2MC1) /*!< ADC Trigger on master compare 1 */
+#define HRTIM_ADCTRIGGEREVENT24_MASTER_CMP2 (HRTIM_ADC2R_AD2MC2) /*!< ADC Trigger on master compare 2 */
+#define HRTIM_ADCTRIGGEREVENT24_MASTER_CMP3 (HRTIM_ADC2R_AD2MC3) /*!< ADC Trigger on master compare 3 */
+#define HRTIM_ADCTRIGGEREVENT24_MASTER_CMP4 (HRTIM_ADC2R_AD2MC4) /*!< ADC Trigger on master compare 4 */
+#define HRTIM_ADCTRIGGEREVENT24_MASTER_PERIOD (HRTIM_ADC2R_AD2MPER) /*!< ADC Trigger on master period */
+#define HRTIM_ADCTRIGGEREVENT24_EVENT_6 (HRTIM_ADC2R_AD2EEV6) /*!< ADC Trigger on external event 6 */
+#define HRTIM_ADCTRIGGEREVENT24_EVENT_7 (HRTIM_ADC2R_AD2EEV7) /*!< ADC Trigger on external event 7 */
+#define HRTIM_ADCTRIGGEREVENT24_EVENT_8 (HRTIM_ADC2R_AD2EEV8) /*!< ADC Trigger on external event 8 */
+#define HRTIM_ADCTRIGGEREVENT24_EVENT_9 (HRTIM_ADC2R_AD2EEV9) /*!< ADC Trigger on external event 9 */
+#define HRTIM_ADCTRIGGEREVENT24_EVENT_10 (HRTIM_ADC2R_AD2EEV10) /*!< ADC Trigger on external event 10 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERA_CMP2 (HRTIM_ADC2R_AD2TAC2) /*!< ADC Trigger on Timer A compare 2 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERA_CMP3 (HRTIM_ADC2R_AD2TAC3) /*!< ADC Trigger on Timer A compare 3 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERA_CMP4 (HRTIM_ADC2R_AD2TAC4) /*!< ADC Trigger on Timer A compare 4 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERA_PERIOD (HRTIM_ADC2R_AD2TAPER) /*!< ADC Trigger on Timer A period */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERB_CMP2 (HRTIM_ADC2R_AD2TBC2) /*!< ADC Trigger on Timer B compare 2 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERB_CMP3 (HRTIM_ADC2R_AD2TBC3) /*!< ADC Trigger on Timer B compare 3 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERB_CMP4 (HRTIM_ADC2R_AD2TBC4) /*!< ADC Trigger on Timer B compare 4 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERB_PERIOD (HRTIM_ADC2R_AD2TBPER) /*!< ADC Trigger on Timer B period */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERC_CMP2 (HRTIM_ADC2R_AD2TCC2) /*!< ADC Trigger on Timer C compare 2 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERC_CMP3 (HRTIM_ADC2R_AD2TCC3) /*!< ADC Trigger on Timer C compare 3 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERC_CMP4 (HRTIM_ADC2R_AD2TCC4) /*!< ADC Trigger on Timer C compare 4 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERC_PERIOD (HRTIM_ADC2R_AD2TCPER) /*!< ADC Trigger on Timer C period */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERC_RESET (HRTIM_ADC2R_AD2TCRST) /*!< ADC Trigger on Timer C reset */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERD_CMP2 (HRTIM_ADC2R_AD2TDC2) /*!< ADC Trigger on Timer D compare 2 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERD_CMP3 (HRTIM_ADC2R_AD2TDC3) /*!< ADC Trigger on Timer D compare 3 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERD_CMP4 (HRTIM_ADC2R_AD2TDC4) /*!< ADC Trigger on Timer D compare 4 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERD_PERIOD (HRTIM_ADC2R_AD2TDPER) /*!< ADC Trigger on Timer D period */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERD_RESET (HRTIM_ADC2R_AD2TDRST) /*!< ADC Trigger on Timer D reset */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERE_CMP2 (HRTIM_ADC2R_AD2TEC2) /*!< ADC Trigger on Timer E compare 2 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERE_CMP3 (HRTIM_ADC2R_AD2TEC3) /*!< ADC Trigger on Timer E compare 3 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERE_CMP4 (HRTIM_ADC2R_AD2TEC4) /*!< ADC Trigger on Timer E compare 4 */
+#define HRTIM_ADCTRIGGEREVENT24_TIMERE_RESET (HRTIM_ADC2R_AD2TERST) /*!< ADC Trigger on Timer E reset */
+
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_DLL_Calibration_Rate HRTIM DLL Calibration Rate
+ * @{
+ * @brief Constants defining the DLL calibration periods (in micro seconds)
+ */
+#define HRTIM_SINGLE_CALIBRATION (uint32_t)0xFFFFFFFF /*!< Non periodic DLL calibration */
+#define HRTIM_CALIBRATIONRATE_7300 (uint32_t)0x00000000 /*!< Periodic DLL calibration: T = 1048576 * tHRTIM (7.3 ms) */
+#define HRTIM_CALIBRATIONRATE_910 (HRTIM_DLLCR_CALRTE_0) /*!< Periodic DLL calibration: T = 131072 * tHRTIM (910 µs) */
+#define HRTIM_CALIBRATIONRATE_114 (HRTIM_DLLCR_CALRTE_1) /*!< Periodic DLL calibration: T = 16384 * tHRTIM (114 µs) */
+#define HRTIM_CALIBRATIONRATE_14 (HRTIM_DLLCR_CALRTE_1 | HRTIM_DLLCR_CALRTE_0) /*!< Periodic DLL calibration: T = 2048 * tHRTIM (14 µs) */
+
+#define IS_HRTIM_CALIBRATIONRATE(CALIBRATIONRATE)\
+ (((CALIBRATIONRATE) == HRTIM_SINGLE_CALIBRATION) || \
+ ((CALIBRATIONRATE) == HRTIM_CALIBRATIONRATE_7300) || \
+ ((CALIBRATIONRATE) == HRTIM_CALIBRATIONRATE_910) || \
+ ((CALIBRATIONRATE) == HRTIM_CALIBRATIONRATE_114) || \
+ ((CALIBRATIONRATE) == HRTIM_CALIBRATIONRATE_14))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Burst_DMA_Registers_Update HRTIM Burst DMA Registers Update
+ * @{
+ * @brief Constants defining the registers that can be written during a burst
+ * DMA operation
+ */
+#define HRTIM_BURSTDMA_NONE (uint32_t)0x00000000 /*!< No register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_CR (HRTIM_BDTUPR_TIMCR) /*!< MCR or TIMxCR register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_ICR (HRTIM_BDTUPR_TIMICR) /*!< MICR or TIMxICR register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_DIER (HRTIM_BDTUPR_TIMDIER) /*!< MDIER or TIMxDIER register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_CNT (HRTIM_BDTUPR_TIMCNT) /*!< MCNTR or CNTxCR register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_PER (HRTIM_BDTUPR_TIMPER) /*!< MPER or PERxR register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_REP (HRTIM_BDTUPR_TIMREP) /*!< MREPR or REPxR register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_CMP1 (HRTIM_BDTUPR_TIMCMP1) /*!< MCMP1R or CMP1xR register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_CMP2 (HRTIM_BDTUPR_TIMCMP2) /*!< MCMP2R or CMP2xR register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_CMP3 (HRTIM_BDTUPR_TIMCMP3) /*!< MCMP3R or CMP3xR register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_CMP4 (HRTIM_BDTUPR_TIMCMP4) /*!< MCMP4R or CMP4xR register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_DTR (HRTIM_BDTUPR_TIMDTR) /*!< TDxR register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_SET1R (HRTIM_BDTUPR_TIMSET1R) /*!< SET1R register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_RST1R (HRTIM_BDTUPR_TIMRST1R) /*!< RST1R register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_SET2R (HRTIM_BDTUPR_TIMSET2R) /*!< SET2R register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_RST2R (HRTIM_BDTUPR_TIMRST2R) /*!< RST1R register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_EEFR1 (HRTIM_BDTUPR_TIMEEFR1) /*!< EEFxR1 register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_EEFR2 (HRTIM_BDTUPR_TIMEEFR2) /*!< EEFxR2 register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_RSTR (HRTIM_BDTUPR_TIMRSTR) /*!< RSTxR register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_CHPR (HRTIM_BDTUPR_TIMCHPR) /*!< CHPxR register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_OUTR (HRTIM_BDTUPR_TIMOUTR) /*!< OUTxR register is updated by Burst DMA accesses */
+#define HRTIM_BURSTDMA_FLTR (HRTIM_BDTUPR_TIMFLTR) /*!< FLTxR register is updated by Burst DMA accesses */
+
+#define IS_HRTIM_TIMER_BURSTDMA(TIMER, BURSTDMA) \
+ ((((TIMER) == HRTIM_TIMERINDEX_MASTER) && (((BURSTDMA) & 0xFFFFFC000) == 0x00000000)) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_A) && (((BURSTDMA) & 0xFFE00000) == 0x00000000)) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_B) && (((BURSTDMA) & 0xFFE00000) == 0x00000000)) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_C) && (((BURSTDMA) & 0xFFE00000) == 0x00000000)) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_D) && (((BURSTDMA) & 0xFFE00000) == 0x00000000)) \
+ || \
+ (((TIMER) == HRTIM_TIMERINDEX_TIMER_E) && (((BURSTDMA) & 0xFFE00000) == 0x00000000)))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Burst_Mode_Control HRTIM Burst Mode Control
+ * @{
+ * @brief Constants used to enable or disable the burst mode controller
+ */
+#define HRTIM_BURSTMODECTL_DISABLED (uint32_t)0x00000000 /*!< Burst mode disabled */
+#define HRTIM_BURSTMODECTL_ENABLED (HRTIM_BMCR_BME) /*!< Burst mode enabled */
+
+#define IS_HRTIM_BURSTMODECTL(BURSTMODECTL)\
+ (((BURSTMODECTL) == HRTIM_BURSTMODECTL_DISABLED) || \
+ ((BURSTMODECTL) == HRTIM_BURSTMODECTL_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Fault_Mode_Control HRTIM Fault Mode Control
+ * @{
+ * @brief Constants used to enable or disable a fault channel
+ */
+#define HRTIM_FAULTMODECTL_DISABLED (uint32_t)0x00000000 /*!< Fault channel is disabled */
+#define HRTIM_FAULTMODECTL_ENABLED (uint32_t)0x00000001 /*!< Fault channel is enabled */
+
+#define IS_HRTIM_FAULTMODECTL(FAULTMODECTL)\
+ (((FAULTMODECTL) == HRTIM_FAULTMODECTL_DISABLED) || \
+ ((FAULTMODECTL) == HRTIM_FAULTMODECTL_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Software_Timer_Update HRTIM Software Timer Update
+ * @{
+ * @brief Constants used to force timer registers update
+ */
+#define HRTIM_TIMERUPDATE_MASTER (HRTIM_CR2_MSWU) /*!< Forces an immediate transfer from the preload to the active register in the master timer */
+#define HRTIM_TIMERUPDATE_A (HRTIM_CR2_TASWU) /*!< Forces an immediate transfer from the preload to the active register in the timer A */
+#define HRTIM_TIMERUPDATE_B (HRTIM_CR2_TBSWU) /*!< Forces an immediate transfer from the preload to the active register in the timer B */
+#define HRTIM_TIMERUPDATE_C (HRTIM_CR2_TCSWU) /*!< Forces an immediate transfer from the preload to the active register in the timer C */
+#define HRTIM_TIMERUPDATE_D (HRTIM_CR2_TDSWU) /*!< Forces an immediate transfer from the preload to the active register in the timer D */
+#define HRTIM_TIMERUPDATE_E (HRTIM_CR2_TESWU) /*!< Forces an immediate transfer from the preload to the active register in the timer E */
+
+#define IS_HRTIM_TIMERUPDATE(TIMERUPDATE) (((TIMERUPDATE) & 0xFFFFFFC0) == 0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Software_Timer_Reset HRTIM Software Timer Reset
+ * @{
+ * @brief Constants used to force timer counter reset
+ */
+#define HRTIM_TIMERRESET_MASTER (HRTIM_CR2_MRST) /*!< Resets the master timer counter */
+#define HRTIM_TIMERRESET_TIMER_A (HRTIM_CR2_TARST) /*!< Resets the timer A counter */
+#define HRTIM_TIMERRESET_TIMER_B (HRTIM_CR2_TBRST) /*!< Resets the timer B counter */
+#define HRTIM_TIMERRESET_TIMER_C (HRTIM_CR2_TCRST) /*!< Resets the timer C counter */
+#define HRTIM_TIMERRESET_TIMER_D (HRTIM_CR2_TDRST) /*!< Resets the timer D counter */
+#define HRTIM_TIMERRESET_TIMER_E (HRTIM_CR2_TERST) /*!< Resets the timer E counter */
+
+#define IS_HRTIM_TIMERRESET(TIMERRESET) (((TIMERRESET) & 0xFFFFC0FF) == 0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Output_Level HRTIM Output Level
+ * @{
+ * @brief Constants defining the level of a timer output
+ */
+#define HRTIM_OUTPUTLEVEL_ACTIVE (uint32_t)0x00000001 /*!< Forces the output to its active state */
+#define HRTIM_OUTPUTLEVEL_INACTIVE (uint32_t)0x00000002 /*!< Forces the output to its inactive state */
+
+#define IS_HRTIM_OUTPUTLEVEL(OUTPUTLEVEL)\
+ (((OUTPUTLEVEL) == HRTIM_OUTPUTLEVEL_ACTIVE) || \
+ ((OUTPUTLEVEL) == HRTIM_OUTPUTLEVEL_INACTIVE))
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Output_State HRTIM Output State
+ * @{
+ * @brief Constants defining the state of a timer output
+ */
+#define HRTIM_OUTPUTSTATE_IDLE (uint32_t)0x00000001 /*!< Main operating mode, where the output can take the active or
+ inactive level as programmed in the crossbar unit */
+#define HRTIM_OUTPUTSTATE_RUN (uint32_t)0x00000002 /*!< Default operating state (e.g. after an HRTIM reset, when the
+ outputs are disabled by software or during a burst mode operation */
+#define HRTIM_OUTPUTSTATE_FAULT (uint32_t)0x00000003 /*!< Safety state, entered in case of a shut-down request on
+ FAULTx inputs */
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Burst_Mode_Status HRTIM Burst Mode Status
+ * @{
+ * @brief Constants defining the operating state of the burst mode controller
+ */
+#define HRTIM_BURSTMODESTATUS_NORMAL (uint32_t) 0x00000000 /*!< Normal operation */
+#define HRTIM_BURSTMODESTATUS_ONGOING (HRTIM_BMCR_BMSTAT) /*!< Burst operation on-going */
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Current_Push_Pull_Status HRTIM Current Push Pull Status
+ * @{
+ * @brief Constants defining on which output the signal is currently applied
+ * in push-pull mode
+ */
+#define HRTIM_PUSHPULL_CURRENTSTATUS_OUTPUT1 (uint32_t) 0x00000000 /*!< Signal applied on output 1 and output 2 forced inactive */
+#define HRTIM_PUSHPULL_CURRENTSTATUS_OUTPUT2 (HRTIM_TIMISR_CPPSTAT) /*!< Signal applied on output 2 and output 1 forced inactive */
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Idle_Push_Pull_Status HRTIM Idle Push Pull Status
+ * @{
+ * @brief Constants defining on which output the signal was applied, in
+ * push-pull mode balanced fault mode or delayed idle mode, when the
+ * protection was triggered
+ */
+#define HRTIM_PUSHPULL_IDLESTATUS_OUTPUT1 (uint32_t) 0x00000000 /*!< Protection occurred when the output 1 was active and output 2 forced inactive */
+#define HRTIM_PUSHPULL_IDLESTATUS_OUTPUT2 (HRTIM_TIMISR_IPPSTAT) /*!< Protection occurred when the output 2 was active and output 1 forced inactive */
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Common_Interrupt_Enable HRTIM Common Interrupt Enable
+ * @{
+ */
+#define HRTIM_IT_NONE (uint32_t)0x00000000 /*!< No interrupt enabled */
+#define HRTIM_IT_FLT1 HRTIM_IER_FLT1 /*!< Fault 1 interrupt enable */
+#define HRTIM_IT_FLT2 HRTIM_IER_FLT2 /*!< Fault 2 interrupt enable */
+#define HRTIM_IT_FLT3 HRTIM_IER_FLT3 /*!< Fault 3 interrupt enable */
+#define HRTIM_IT_FLT4 HRTIM_IER_FLT4 /*!< Fault 4 interrupt enable */
+#define HRTIM_IT_FLT5 HRTIM_IER_FLT5 /*!< Fault 5 interrupt enable */
+#define HRTIM_IT_SYSFLT HRTIM_IER_SYSFLT /*!< System Fault interrupt enable */
+#define HRTIM_IT_DLLRDY HRTIM_IER_DLLRDY /*!< DLL ready interrupt enable */
+#define HRTIM_IT_BMPER HRTIM_IER_BMPER /*!< Burst mode period interrupt enable */
+
+#define IS_HRTIM_IT(IT) (((IT) & 0xFFFCFFC0) == 0x00000000)
+
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Master_Interrupt_Enable HRTIM Master Interrupt Enable
+ * @{
+ */
+#define HRTIM_MASTER_IT_NONE (uint32_t)0x00000000 /*!< No interrupt enabled */
+#define HRTIM_MASTER_IT_MCMP1 HRTIM_MDIER_MCMP1IE /*!< Master compare 1 interrupt enable */
+#define HRTIM_MASTER_IT_MCMP2 HRTIM_MDIER_MCMP2IE /*!< Master compare 2 interrupt enable */
+#define HRTIM_MASTER_IT_MCMP3 HRTIM_MDIER_MCMP3IE /*!< Master compare 3 interrupt enable */
+#define HRTIM_MASTER_IT_MCMP4 HRTIM_MDIER_MCMP4IE /*!< Master compare 4 interrupt enable */
+#define HRTIM_MASTER_IT_MREP HRTIM_MDIER_MREPIE /*!< Master Repetition interrupt enable */
+#define HRTIM_MASTER_IT_SYNC HRTIM_MDIER_SYNCIE /*!< Synchronization input interrupt enable */
+#define HRTIM_MASTER_IT_MUPD HRTIM_MDIER_MUPDIE /*!< Master update interrupt enable */
+
+#define IS_HRTIM_MASTER_IT(MASTER_IT) (((MASTER_IT) & 0xFFFFFF80) == 0x00000000)
+
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timing_Unit_Interrupt_Enable HRTIM Timing Unit Interrupt Enable
+ * @{
+ */
+#define HRTIM_TIM_IT_NONE (uint32_t)0x00000000 /*!< No interrupt enabled */
+#define HRTIM_TIM_IT_CMP1 HRTIM_TIMDIER_CMP1IE /*!< Timer compare 1 interrupt enable */
+#define HRTIM_TIM_IT_CMP2 HRTIM_TIMDIER_CMP2IE /*!< Timer compare 2 interrupt enable */
+#define HRTIM_TIM_IT_CMP3 HRTIM_TIMDIER_CMP3IE /*!< Timer compare 3 interrupt enable */
+#define HRTIM_TIM_IT_CMP4 HRTIM_TIMDIER_CMP4IE /*!< Timer compare 4 interrupt enable */
+#define HRTIM_TIM_IT_REP HRTIM_TIMDIER_REPIE /*!< Timer repetition interrupt enable */
+#define HRTIM_TIM_IT_UPD HRTIM_TIMDIER_UPDIE /*!< Timer update interrupt enable */
+#define HRTIM_TIM_IT_CPT1 HRTIM_TIMDIER_CPT1IE /*!< Timer capture 1 interrupt enable */
+#define HRTIM_TIM_IT_CPT2 HRTIM_TIMDIER_CPT2IE /*!< Timer capture 2 interrupt enable */
+#define HRTIM_TIM_IT_SET1 HRTIM_TIMDIER_SET1IE /*!< Timer output 1 set interrupt enable */
+#define HRTIM_TIM_IT_RST1 HRTIM_TIMDIER_RST1IE /*!< Timer output 1 reset interrupt enable */
+#define HRTIM_TIM_IT_SET2 HRTIM_TIMDIER_SET2IE /*!< Timer output 2 set interrupt enable */
+#define HRTIM_TIM_IT_RST2 HRTIM_TIMDIER_RST2IE /*!< Timer output 2 reset interrupt enable */
+#define HRTIM_TIM_IT_RST HRTIM_TIMDIER_RSTIE /*!< Timer reset interrupt enable */
+#define HRTIM_TIM_IT_DLYPRT HRTIM_TIMDIER_DLYPRTIE /*!< Timer delay protection interrupt enable */
+
+#define IS_HRTIM_TIM_IT(IS_HRTIM_TIM_IT) (((IS_HRTIM_TIM_IT) & 0xFFFF8020) == 0x00000000)
+
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Common_Interrupt_Flag HRTIM Common Interrupt Flag
+ * @{
+ */
+#define HRTIM_FLAG_FLT1 HRTIM_ISR_FLT1 /*!< Fault 1 interrupt flag */
+#define HRTIM_FLAG_FLT2 HRTIM_ISR_FLT2 /*!< Fault 2 interrupt flag */
+#define HRTIM_FLAG_FLT3 HRTIM_ISR_FLT3 /*!< Fault 3 interrupt flag */
+#define HRTIM_FLAG_FLT4 HRTIM_ISR_FLT4 /*!< Fault 4 interrupt flag */
+#define HRTIM_FLAG_FLT5 HRTIM_ISR_FLT5 /*!< Fault 5 interrupt flag */
+#define HRTIM_FLAG_SYSFLT HRTIM_ISR_SYSFLT /*!< System Fault interrupt flag */
+#define HRTIM_FLAG_DLLRDY HRTIM_ISR_DLLRDY /*!< DLL ready interrupt flag */
+#define HRTIM_FLAG_BMPER HRTIM_ISR_BMPER /*!< Burst mode period interrupt flag */
+
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Master_Interrupt_Flag HRTIM Master Interrupt Flag
+ * @{
+ */
+#define HRTIM_MASTER_FLAG_MCMP1 HRTIM_MISR_MCMP1 /*!< Master compare 1 interrupt flag */
+#define HRTIM_MASTER_FLAG_MCMP2 HRTIM_MISR_MCMP2 /*!< Master compare 2 interrupt flag */
+#define HRTIM_MASTER_FLAG_MCMP3 HRTIM_MISR_MCMP3 /*!< Master compare 3 interrupt flag */
+#define HRTIM_MASTER_FLAG_MCMP4 HRTIM_MISR_MCMP4 /*!< Master compare 4 interrupt flag */
+#define HRTIM_MASTER_FLAG_MREP HRTIM_MISR_MREP /*!< Master Repetition interrupt flag */
+#define HRTIM_MASTER_FLAG_SYNC HRTIM_MISR_SYNC /*!< Synchronization input interrupt flag */
+#define HRTIM_MASTER_FLAG_MUPD HRTIM_MISR_MUPD /*!< Master update interrupt flag */
+
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timing_Unit_Interrupt_Flag HRTIM Timing Unit Interrupt Flag
+ * @{
+ */
+#define HRTIM_TIM_FLAG_CMP1 HRTIM_TIMISR_CMP1 /*!< Timer compare 1 interrupt flag */
+#define HRTIM_TIM_FLAG_CMP2 HRTIM_TIMISR_CMP2 /*!< Timer compare 2 interrupt flag */
+#define HRTIM_TIM_FLAG_CMP3 HRTIM_TIMISR_CMP3 /*!< Timer compare 3 interrupt flag */
+#define HRTIM_TIM_FLAG_CMP4 HRTIM_TIMISR_CMP4 /*!< Timer compare 4 interrupt flag */
+#define HRTIM_TIM_FLAG_REP HRTIM_TIMISR_REP /*!< Timer repetition interrupt flag */
+#define HRTIM_TIM_FLAG_UPD HRTIM_TIMISR_UPD /*!< Timer update interrupt flag */
+#define HRTIM_TIM_FLAG_CPT1 HRTIM_TIMISR_CPT1 /*!< Timer capture 1 interrupt flag */
+#define HRTIM_TIM_FLAG_CPT2 HRTIM_TIMISR_CPT2 /*!< Timer capture 2 interrupt flag */
+#define HRTIM_TIM_FLAG_SET1 HRTIM_TIMISR_SET1 /*!< Timer output 1 set interrupt flag */
+#define HRTIM_TIM_FLAG_RST1 HRTIM_TIMISR_RST1 /*!< Timer output 1 reset interrupt flag */
+#define HRTIM_TIM_FLAG_SET2 HRTIM_TIMISR_SET2 /*!< Timer output 2 set interrupt flag */
+#define HRTIM_TIM_FLAG_RST2 HRTIM_TIMISR_RST2 /*!< Timer output 2 reset interrupt flag */
+#define HRTIM_TIM_FLAG_RST HRTIM_TIMISR_RST /*!< Timer reset interrupt flag */
+#define HRTIM_TIM_FLAG_DLYPRT HRTIM_TIMISR_DLYPRT /*!< Timer delay protection interrupt flag */
+
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Master_DMA_Request_Enable HRTIM Master DMA Request Enable
+ * @{
+ */
+#define HRTIM_MASTER_DMA_NONE (uint32_t)0x00000000 /*!< No DMA request enable */
+#define HRTIM_MASTER_DMA_MCMP1 HRTIM_MDIER_MCMP1DE /*!< Master compare 1 DMA request enable */
+#define HRTIM_MASTER_DMA_MCMP2 HRTIM_MDIER_MCMP2DE /*!< Master compare 2 DMA request enable */
+#define HRTIM_MASTER_DMA_MCMP3 HRTIM_MDIER_MCMP3DE /*!< Master compare 3 DMA request enable */
+#define HRTIM_MASTER_DMA_MCMP4 HRTIM_MDIER_MCMP4DE /*!< Master compare 4 DMA request enable */
+#define HRTIM_MASTER_DMA_MREP HRTIM_MDIER_MREPDE /*!< Master Repetition DMA request enable */
+#define HRTIM_MASTER_DMA_SYNC HRTIM_MDIER_SYNCDE /*!< Synchronization input DMA request enable */
+#define HRTIM_MASTER_DMA_MUPD HRTIM_MDIER_MUPDDE /*!< Master update DMA request enable */
+
+#define IS_HRTIM_MASTER_DMA(MASTER_DMA) (((MASTER_DMA) & 0xFF80FFFF) == 0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup HRTIM_Timing_Unit_DMA_Request_Enable HRTIM Timing Unit DMA Request Enable
+ * @{
+ */
+#define HRTIM_TIM_DMA_NONE (uint32_t)0x00000000 /*!< No DMA request enable */
+#define HRTIM_TIM_DMA_CMP1 HRTIM_TIMDIER_CMP1DE /*!< Timer compare 1 DMA request enable */
+#define HRTIM_TIM_DMA_CMP2 HRTIM_TIMDIER_CMP2DE /*!< Timer compare 2 DMA request enable */
+#define HRTIM_TIM_DMA_CMP3 HRTIM_TIMDIER_CMP3DE /*!< Timer compare 3 DMA request enable */
+#define HRTIM_TIM_DMA_CMP4 HRTIM_TIMDIER_CMP4DE /*!< Timer compare 4 DMA request enable */
+#define HRTIM_TIM_DMA_REP HRTIM_TIMDIER_REPDE /*!< Timer repetition DMA request enable */
+#define HRTIM_TIM_DMA_UPD HRTIM_TIMDIER_UPDDE /*!< Timer update DMA request enable */
+#define HRTIM_TIM_DMA_CPT1 HRTIM_TIMDIER_CPT1DE /*!< Timer capture 1 DMA request enable */
+#define HRTIM_TIM_DMA_CPT2 HRTIM_TIMDIER_CPT2DE /*!< Timer capture 2 DMA request enable */
+#define HRTIM_TIM_DMA_SET1 HRTIM_TIMDIER_SET1DE /*!< Timer output 1 set DMA request enable */
+#define HRTIM_TIM_DMA_RST1 HRTIM_TIMDIER_RST1DE /*!< Timer output 1 reset DMA request enable */
+#define HRTIM_TIM_DMA_SET2 HRTIM_TIMDIER_SET2DE /*!< Timer output 2 set DMA request enable */
+#define HRTIM_TIM_DMA_RST2 HRTIM_TIMDIER_RST2DE /*!< Timer output 2 reset DMA request enable */
+#define HRTIM_TIM_DMA_RST HRTIM_TIMDIER_RSTDE /*!< Timer reset DMA request enable */
+#define HRTIM_TIM_DMA_DLYPRT HRTIM_TIMDIER_DLYPRTDE /*!< Timer delay protection DMA request enable */
+
+#define IS_HRTIM_TIM_DMA(TIM_DMA) (((TIM_DMA) & 0x8020FFFF) == 0x00000000)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup HRTIM_Exported_Macros HRTIM Exported Macros
+ * @{
+ */
+
+/** @brief Reset HRTIM handle state
+ * @param __HANDLE__: HRTIM handle.
+ * @retval None
+ */
+#define __HAL_HRTIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_HRTIM_STATE_RESET)
+
+/** @brief Enables or disables the timer counter(s)
+ * @param __HANDLE__: specifies the HRTIM Handle.
+ * @param __TIMERS__: timersto enable/disable
+ * This parameter can be any combinations of the following values:
+ * @arg HRTIM_TIMERID_MASTER: Master timer identifier
+ * @arg HRTIM_TIMERID_TIMER_A: Timer A identifier
+ * @arg HRTIM_TIMERID_TIMER_B: Timer B identifier
+ * @arg HRTIM_TIMERID_TIMER_C: Timer C identifier
+ * @arg HRTIM_TIMERID_TIMER_D: Timer D identifier
+ * @arg HRTIM_TIMERID_TIMER_E: Timer E identifier
+ * @retval None
+ */
+#define __HAL_HRTIM_ENABLE(__HANDLE__, __TIMERS__) ((__HANDLE__)->Instance->sMasterRegs.MCR |= (__TIMERS__))
+
+/* The counter of a timing unit is disabled only if all the timer outputs */
+/* are disabled and no capture is configured */
+#define HRTIM_TAOEN_MASK (HRTIM_OENR_TA2OEN | HRTIM_OENR_TA1OEN)
+#define HRTIM_TBOEN_MASK (HRTIM_OENR_TB2OEN | HRTIM_OENR_TB1OEN)
+#define HRTIM_TCOEN_MASK (HRTIM_OENR_TC2OEN | HRTIM_OENR_TC1OEN)
+#define HRTIM_TDOEN_MASK (HRTIM_OENR_TD2OEN | HRTIM_OENR_TD1OEN)
+#define HRTIM_TEOEN_MASK (HRTIM_OENR_TE2OEN | HRTIM_OENR_TE1OEN)
+#define __HAL_HRTIM_DISABLE(__HANDLE__, __TIMERS__)\
+ do {\
+ if (((__TIMERS__) & HRTIM_TIMERID_MASTER) == HRTIM_TIMERID_MASTER)\
+ {\
+ ((__HANDLE__)->Instance->sMasterRegs.MCR &= ~HRTIM_TIMERID_MASTER);\
+ }\
+ if (((__TIMERS__) & HRTIM_TIMERID_TIMER_A) == HRTIM_TIMERID_TIMER_A)\
+ {\
+ if (((__HANDLE__)->Instance->sCommonRegs.OENR & HRTIM_TAOEN_MASK) == RESET)\
+ {\
+ ((__HANDLE__)->Instance->sMasterRegs.MCR &= ~HRTIM_TIMERID_TIMER_A);\
+ }\
+ }\
+ if (((__TIMERS__) & HRTIM_TIMERID_TIMER_B) == HRTIM_TIMERID_TIMER_B)\
+ {\
+ if (((__HANDLE__)->Instance->sCommonRegs.OENR & HRTIM_TBOEN_MASK) == RESET)\
+ {\
+ ((__HANDLE__)->Instance->sMasterRegs.MCR &= ~HRTIM_TIMERID_TIMER_B);\
+ }\
+ }\
+ if (((__TIMERS__) & HRTIM_TIMERID_TIMER_C) == HRTIM_TIMERID_TIMER_C)\
+ {\
+ if (((__HANDLE__)->Instance->sCommonRegs.OENR & HRTIM_TCOEN_MASK) == RESET)\
+ {\
+ ((__HANDLE__)->Instance->sMasterRegs.MCR &= ~HRTIM_TIMERID_TIMER_C);\
+ }\
+ }\
+ if (((__TIMERS__) & HRTIM_TIMERID_TIMER_D) == HRTIM_TIMERID_TIMER_D)\
+ {\
+ if (((__HANDLE__)->Instance->sCommonRegs.OENR & HRTIM_TDOEN_MASK) == RESET)\
+ {\
+ ((__HANDLE__)->Instance->sMasterRegs.MCR &= ~HRTIM_TIMERID_TIMER_D);\
+ }\
+ }\
+ if (((__TIMERS__) & HRTIM_TIMERID_TIMER_E) == HRTIM_TIMERID_TIMER_E)\
+ {\
+ if (((__HANDLE__)->Instance->sCommonRegs.OENR & HRTIM_TEOEN_MASK) == RESET)\
+ {\
+ ((__HANDLE__)->Instance->sMasterRegs.MCR &= ~HRTIM_TIMERID_TIMER_E);\
+ }\
+ }\
+ } while(0)
+
+/** @brief Enables or disables the specified HRTIM common interrupts.
+ * @param __HANDLE__: specifies the HRTIM Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg HRTIM_IT_FLT1: Fault 1 interrupt enable
+ * @arg HRTIM_IT_FLT2: Fault 2 interrupt enable
+ * @arg HRTIM_IT_FLT3: Fault 3 interrupt enable
+ * @arg HRTIM_IT_FLT4: Fault 4 interrupt enable
+ * @arg HRTIM_IT_FLT5: Fault 5 interrupt enable
+ * @arg HRTIM_IT_SYSFLT: System Fault interrupt enable
+ * @arg HRTIM_IT_DLLRDY: DLL ready interrupt enable
+ * @arg HRTIM_IT_BMPER: Burst mode period interrupt enable
+ * @retval None
+ */
+#define __HAL_HRTIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->sCommonRegs.IER |= (__INTERRUPT__))
+#define __HAL_HRTIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->sCommonRegs.IER &= ~(__INTERRUPT__))
+
+/** @brief Enables or disables the specified HRTIM Master timer interrupts.
+ * @param __HANDLE__: specifies the HRTIM Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg HRTIM_MASTER_IT_MCMP1: Master compare 1 interrupt enable
+ * @arg HRTIM_MASTER_IT_MCMP2: Master compare 2 interrupt enable
+ * @arg HRTIM_MASTER_IT_MCMP3: Master compare 3 interrupt enable
+ * @arg HRTIM_MASTER_IT_MCMP4: Master compare 4 interrupt enable
+ * @arg HRTIM_MASTER_IT_MREP: Master Repetition interrupt enable
+ * @arg HRTIM_MASTER_IT_SYNC: Synchronization input interrupt enable
+ * @arg HRTIM_MASTER_IT_MUPD: Master update interrupt enable
+ * @retval None
+ */
+#define __HAL_HRTIM_MASTER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->sMasterRegs.MDIER |= (__INTERRUPT__))
+#define __HAL_HRTIM_MASTER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->sMasterRegs.MDIER &= ~(__INTERRUPT__))
+
+/** @brief Enables or disables the specified HRTIM Timerx interrupts.
+ * @param __HANDLE__: specifies the HRTIM Handle.
+ * @param __TIMER__: specified the timing unit (Timer A to E)
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg HRTIM_TIM_IT_CMP1: Timer compare 1 interrupt enable
+ * @arg HRTIM_TIM_IT_CMP2: Timer compare 2 interrupt enable
+ * @arg HRTIM_TIM_IT_CMP3: Timer compare 3 interrupt enable
+ * @arg HRTIM_TIM_IT_CMP4: Timer compare 4 interrupt enable
+ * @arg HRTIM_TIM_IT_REP: Timer repetition interrupt enable
+ * @arg HRTIM_TIM_IT_UPD: Timer update interrupt enable
+ * @arg HRTIM_TIM_IT_CPT1: Timer capture 1 interrupt enable
+ * @arg HRTIM_TIM_IT_CPT2: Timer capture 2 interrupt enable
+ * @arg HRTIM_TIM_IT_SET1: Timer output 1 set interrupt enable
+ * @arg HRTIM_TIM_IT_RST1: Timer output 1 reset interrupt enable
+ * @arg HRTIM_TIM_IT_SET2: Timer output 2 set interrupt enable
+ * @arg HRTIM_TIM_IT_RST2: Timer output 2 reset interrupt enable
+ * @arg HRTIM_TIM_IT_RST: Timer reset interrupt enable
+ * @arg HRTIM_TIM_IT_DLYPRT: Timer delay protection interrupt enable
+ * @retval None
+ */
+#define __HAL_HRTIM_TIMER_ENABLE_IT(__HANDLE__, __TIMER__, __INTERRUPT__) ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].TIMxDIER |= (__INTERRUPT__))
+#define __HAL_HRTIM_TIMER_DISABLE_IT(__HANDLE__, __TIMER__, __INTERRUPT__) ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].TIMxDIER &= ~(__INTERRUPT__))
+
+/** @brief Checks if the specified HRTIM common interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the HRTIM Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg HRTIM_IT_FLT1: Fault 1 interrupt enable
+ * @arg HRTIM_IT_FLT2: Fault 2 interrupt enable
+ * @arg HRTIM_IT_FLT3: Fault 3 enable
+ * @arg HRTIM_IT_FLT4: Fault 4 enable
+ * @arg HRTIM_IT_FLT5: Fault 5 enable
+ * @arg HRTIM_IT_SYSFLT: System Fault interrupt enable
+ * @arg HRTIM_IT_DLLRDY: DLL ready interrupt enable
+ * @arg HRTIM_IT_BMPER: Burst mode period interrupt enable
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_HRTIM_GET_ITSTATUS(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->sCommonRegs.IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks if the specified HRTIM Master interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the HRTIM Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg HRTIM_MASTER_IT_MCMP1: Master compare 1 interrupt enable
+ * @arg HRTIM_MASTER_IT_MCMP2: Master compare 2 interrupt enable
+ * @arg HRTIM_MASTER_IT_MCMP3: Master compare 3 interrupt enable
+ * @arg HRTIM_MASTER_IT_MCMP4: Master compare 4 interrupt enable
+ * @arg HRTIM_MASTER_IT_MREP: Master Repetition interrupt enable
+ * @arg HRTIM_MASTER_IT_SYNC: Synchronization input interrupt enable
+ * @arg HRTIM_MASTER_IT_MUPD: Master update interrupt enable
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_HRTIM_MASTER_GET_ITSTATUS(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->sMasterRegs.MDIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks if the specified HRTIM Timerx interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the HRTIM Handle.
+ * @param __TIMER__: specified the timing unit (Timer A to E)
+ * @param __INTERRUPT__: specifies the interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg HRTIM_MASTER_IT_MCMP1: Master compare 1 interrupt enable
+ * @arg HRTIM_MASTER_IT_MCMP2: Master compare 2 interrupt enable
+ * @arg HRTIM_MASTER_IT_MCMP3: Master compare 3 interrupt enable
+ * @arg HRTIM_MASTER_IT_MCMP4: Master compare 4 interrupt enable
+ * @arg HRTIM_MASTER_IT_MREP: Master Repetition interrupt enable
+ * @arg HRTIM_MASTER_IT_SYNC: Synchronization input interrupt enable
+ * @arg HRTIM_MASTER_IT_MUPD: Master update interrupt enable
+ * @arg HRTIM_TIM_IT_CMP1: Timer compare 1 interrupt enable
+ * @arg HRTIM_TIM_IT_CMP2: Timer compare 2 interrupt enable
+ * @arg HRTIM_TIM_IT_CMP3: Timer compare 3 interrupt enable
+ * @arg HRTIM_TIM_IT_CMP4: Timer compare 4 interrupt enable
+ * @arg HRTIM_TIM_IT_REP: Timer repetition interrupt enable
+ * @arg HRTIM_TIM_IT_UPD: Timer update interrupt enable
+ * @arg HRTIM_TIM_IT_CPT1: Timer capture 1 interrupt enable
+ * @arg HRTIM_TIM_IT_CPT2: Timer capture 2 interrupt enable
+ * @arg HRTIM_TIM_IT_SET1: Timer output 1 set interrupt enable
+ * @arg HRTIM_TIM_IT_RST1: Timer output 1 reset interrupt enable
+ * @arg HRTIM_TIM_IT_SET2: Timer output 2 set interrupt enable
+ * @arg HRTIM_TIM_IT_RST2: Timer output 2 reset interrupt enable
+ * @arg HRTIM_TIM_IT_RST: Timer reset interrupt enable
+ * @arg HRTIM_TIM_IT_DLYPRT: Timer delay protection interrupt enable
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_HRTIM_TIMER_GET_ITSTATUS(__HANDLE__, __TIMER__, __INTERRUPT__) ((((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].TIMxDIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Clears the specified HRTIM common pending flag.
+ * @param __HANDLE__: specifies the HRTIM Handle.
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one of the following values:
+ * @arg HRTIM_IT_FLT1: Fault 1 interrupt clear flag
+ * @arg HRTIM_IT_FLT2: Fault 2 interrupt clear flag
+ * @arg HRTIM_IT_FLT3: Fault 3 clear flag
+ * @arg HRTIM_IT_FLT4: Fault 4 clear flag
+ * @arg HRTIM_IT_FLT5: Fault 5 clear flag
+ * @arg HRTIM_IT_SYSFLT: System Fault interrupt clear flag
+ * @arg HRTIM_IT_DLLRDY: DLL ready interrupt clear flag
+ * @arg HRTIM_IT_BMPER: Burst mode period interrupt clear flag
+ * @retval None
+ */
+#define __HAL_HRTIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->sCommonRegs.ICR = (__INTERRUPT__))
+
+/** @brief Clears the specified HRTIM Master pending flag.
+ * @param __HANDLE__: specifies the HRTIM Handle.
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one of the following values:
+ * @arg HRTIM_MASTER_IT_MCMP1: Master compare 1 interrupt clear flag
+ * @arg HRTIM_MASTER_IT_MCMP2: Master compare 2 interrupt clear flag
+ * @arg HRTIM_MASTER_IT_MCMP3: Master compare 3 interrupt clear flag
+ * @arg HRTIM_MASTER_IT_MCMP4: Master compare 4 interrupt clear flag
+ * @arg HRTIM_MASTER_IT_MREP: Master Repetition interrupt clear flag
+ * @arg HRTIM_MASTER_IT_SYNC: Synchronization input interrupt clear flag
+ * @arg HRTIM_MASTER_IT_MUPD: Master update interrupt clear flag
+ * @retval None
+ */
+#define __HAL_HRTIM_MASTER_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->sMasterRegs.MICR = (__INTERRUPT__))
+
+/** @brief Clears the specified HRTIM Timerx pending flag.
+ * @param __HANDLE__: specifies the HRTIM Handle.
+ * @param __TIMER__: specified the timing unit (Timer A to E)
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one of the following values:
+ * @arg HRTIM_TIM_IT_CMP1: Timer compare 1 interrupt clear flag
+ * @arg HRTIM_TIM_IT_CMP2: Timer compare 2 interrupt clear flag
+ * @arg HRTIM_TIM_IT_CMP3: Timer compare 3 interrupt clear flag
+ * @arg HRTIM_TIM_IT_CMP4: Timer compare 4 interrupt clear flag
+ * @arg HRTIM_TIM_IT_REP: Timer repetition interrupt clear flag
+ * @arg HRTIM_TIM_IT_UPD: Timer update interrupt clear flag
+ * @arg HRTIM_TIM_IT_CPT1: Timer capture 1 interrupt clear flag
+ * @arg HRTIM_TIM_IT_CPT2: Timer capture 2 interrupt clear flag
+ * @arg HRTIM_TIM_IT_SET1: Timer output 1 set interrupt clear flag
+ * @arg HRTIM_TIM_IT_RST1: Timer output 1 reset interrupt clear flag
+ * @arg HRTIM_TIM_IT_SET2: Timer output 2 set interrupt clear flag
+ * @arg HRTIM_TIM_IT_RST2: Timer output 2 reset interrupt clear flag
+ * @arg HRTIM_TIM_IT_RST: Timer reset interrupt clear flag
+ * @arg HRTIM_TIM_IT_DLYPRT: Timer output 1 delay protection interrupt clear flag
+ * @retval None
+ */
+#define __HAL_HRTIM_TIMER_CLEAR_IT(__HANDLE__, __TIMER__, __INTERRUPT__) ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].TIMxICR = (__INTERRUPT__))
+
+/* DMA HANDLING */
+/** @brief Enables or disables the specified HRTIM common interrupts.
+ * @param __HANDLE__: specifies the HRTIM Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg HRTIM_IT_FLT1: Fault 1 interrupt enable
+ * @arg HRTIM_IT_FLT2: Fault 2 interrupt enable
+ * @arg HRTIM_IT_FLT3: Fault 3 interrupt enable
+ * @arg HRTIM_IT_FLT4: Fault 4 interrupt enable
+ * @arg HRTIM_IT_FLT5: Fault 5 interrupt enable
+ * @arg HRTIM_IT_SYSFLT: System Fault interrupt enable
+ * @arg HRTIM_IT_DLLRDY: DLL ready interrupt enable
+ * @arg HRTIM_IT_BMPER: Burst mode period interrupt enable
+ * @retval None
+ */
+#define __HAL_HRTIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->sCommonRegs.IER |= (__INTERRUPT__))
+#define __HAL_HRTIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->sCommonRegs.IER &= ~(__INTERRUPT__))
+
+/** @brief Enables or disables the specified HRTIM Master timer DMA requets.
+ * @param __HANDLE__: specifies the HRTIM Handle.
+ * @param __DMA__: specifies the DMA request to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg HRTIM_MASTER_DMA_MCMP1: Master compare 1 DMA resquest enable
+ * @arg HRTIM_MASTER_DMA_MCMP2: Master compare 2 DMA resquest enable
+ * @arg HRTIM_MASTER_DMA_MCMP3: Master compare 3 DMA resquest enable
+ * @arg HRTIM_MASTER_DMA_MCMP4: Master compare 4 DMA resquest enable
+ * @arg HRTIM_MASTER_DMA_MREP: Master Repetition DMA resquest enable
+ * @arg HRTIM_MASTER_DMA_SYNC: Synchronization input DMA resquest enable
+ * @arg HRTIM_MASTER_DMA_MUPD: Master update DMA resquest enable
+ * @retval None
+ */
+#define __HAL_HRTIM_MASTER_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->sMasterRegs.MDIER |= (__DMA__))
+#define __HAL_HRTIM_MASTER_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->sMasterRegs.MDIER &= ~(__DMA__))
+
+/** @brief Enables or disables the specified HRTIM Timerx DMA requests.
+ * @param __HANDLE__: specifies the HRTIM Handle.
+ * @param __TIMER__: specified the timing unit (Timer A to E)
+ * @param __DMA__: specifies the DMA request to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg HRTIM_TIM_DMA_CMP1: Timer compare 1 DMA resquest enable
+ * @arg HRTIM_TIM_DMA_CMP2: Timer compare 2 DMA resquest enable
+ * @arg HRTIM_TIM_DMA_CMP3: Timer compare 3 DMA resquest enable
+ * @arg HRTIM_TIM_DMA_CMP4: Timer compare 4 DMA resquest enable
+ * @arg HRTIM_TIM_DMA_REP: Timer repetition DMA resquest enable
+ * @arg HRTIM_TIM_DMA_UPD: Timer update DMA resquest enable
+ * @arg HRTIM_TIM_DMA_CPT1: Timer capture 1 DMA resquest enable
+ * @arg HRTIM_TIM_DMA_CPT2: Timer capture 2 DMA resquest enable
+ * @arg HRTIM_TIM_DMA_SET1: Timer output 1 set DMA resquest enable
+ * @arg HRTIM_TIM_DMA_RST1: Timer output 1 reset DMA resquest enable
+ * @arg HRTIM_TIM_DMA_SET2: Timer output 2 set DMA resquest enable
+ * @arg HRTIM_TIM_DMA_RST2: Timer output 2 reset DMA resquest enable
+ * @arg HRTIM_TIM_DMA_RST: Timer reset DMA resquest enable
+ * @arg HRTIM_TIM_DMA_DLYPRT: Timer delay protection DMA resquest enable
+ * @retval None
+ */
+#define __HAL_HRTIM_TIMER_ENABLE_DMA(__HANDLE__, __TIMER__, __DMA__) ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].TIMxDIER |= (__DMA__))
+#define __HAL_HRTIM_TIMER_DISABLE_DMA(__HANDLE__, __TIMER__, __DMA__) ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].TIMxDIER &= ~(__DMA__))
+
+#define __HAL_HRTIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->sCommonRegs.ISR & (__FLAG__)) == (__FLAG__))
+#define __HAL_HRTIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->sCommonRegs.ICR = (__FLAG__))
+
+#define __HAL_HRTIM_MASTER_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->sMasterRegs.MISR & (__FLAG__)) == (__FLAG__))
+#define __HAL_HRTIM_MASTER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->sMasterRegs.MICR = (__FLAG__))
+
+#define __HAL_HRTIM_TIMER_GET_FLAG(__HANDLE__, __TIMER__, __FLAG__) (((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].TIMxISR & (__FLAG__)) == (__FLAG__))
+#define __HAL_HRTIM_TIMER_CLEAR_FLAG(__HANDLE__, __TIMER__, __FLAG__) ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].TIMxICR = (__FLAG__))
+
+/** @brief Sets the HRTIM timer Counter Register value on runtime
+ * @param __HANDLE__: HRTIM Handle.
+ * @param __TIMER__: HRTIM timer
+ * This parameter can be one of the following values:
+ * @arg 0x5 for master timer
+ * @arg 0x0 to 0x4 for timers A to E
+ * @param __COUNTER__: specifies the Counter Register new value.
+ * @retval None
+ */
+#define __HAL_HRTIM_SetCounter(__HANDLE__, __TIMER__, __COUNTER__) \
+ (((__TIMER__) == HRTIM_TIMERINDEX_MASTER) ? ((__HANDLE__)->Instance->sMasterRegs.MCNTR = (__COUNTER__)) :\
+ ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].CNTxR = (__COUNTER__)))
+
+/** @brief Gets the HRTIM timer Counter Register value on runtime
+ * @param __HANDLE__: HRTIM Handle.
+ * @param __TIMER__: HRTIM timer
+ * This parameter can be one of the following values:
+ * @arg 0x5 for master timer
+ * @arg 0x0 to 0x4 for timers A to E
+ * @retval HRTIM timer Counter Register value
+ */
+#define __HAL_HRTIM_GetCounter(__HANDLE__, __TIMER__) \
+ (((__TIMER__) == HRTIM_TIMERINDEX_MASTER) ? ((__HANDLE__)->Instance->sMasterRegs.MCNTR) :\
+ ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].CNTxR))
+
+/** @brief Sets the HRTIM timer Period value on runtime
+ * @param __HANDLE__: HRTIM Handle.
+ * @param __TIMER__: HRTIM timer
+ * This parameter can be one of the following values:
+ * @arg 0x5 for master timer
+ * @arg 0x0 to 0x4 for timers A to E
+ * @param __PERIOD__: specifies the Period Register new value.
+ * @retval None
+ */
+#define __HAL_HRTIM_SetPeriod(__HANDLE__, __TIMER__, __PERIOD__) \
+ (((__TIMER__) == HRTIM_TIMERINDEX_MASTER) ? ((__HANDLE__)->Instance->sMasterRegs.MPER = (__PERIOD__)) :\
+ ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].PERxR = (__PERIOD__)))
+
+/** @brief Gets the HRTIM timer Period Register value on runtime
+ * @param __HANDLE__: HRTIM Handle.
+ * @param __TIMER__: HRTIM timer
+ * This parameter can be one of the following values:
+ * @arg 0x5 for master timer
+ * @arg 0x0 to 0x4 for timers A to E
+ * @retval timer Period Register
+ */
+#define __HAL_HRTIM_GetPeriod(__HANDLE__, __TIMER__) \
+ (((__TIMER__) == HRTIM_TIMERINDEX_MASTER) ? ((__HANDLE__)->Instance->sMasterRegs.MPER) :\
+ ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].PERxR))
+
+/** @brief Sets the HRTIM timer clock prescaler value on runtime
+ * @param __HANDLE__: HRTIM Handle.
+ * @param __TIMER__: HRTIM timer
+ * This parameter can be one of the following values:
+ * @arg 0x5 for master timer
+ * @arg 0x0 to 0x4 for timers A to E
+ * @param __PRESCALER__: specifies the clock prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg HRTIM_PRESCALERRATIO_MUL32: fHRCK: 4.608 GHz - Resolution: 217 ps - Min PWM frequency: 70.3 kHz (fHRTIM=144MHz)
+ * @arg HRTIM_PRESCALERRATIO_MUL16: fHRCK: 2.304 GHz - Resolution: 434 ps - Min PWM frequency: 35.1 KHz (fHRTIM=144MHz)
+ * @arg HRTIM_PRESCALERRATIO_MUL8: fHRCK: 1.152 GHz - Resolution: 868 ps - Min PWM frequency: 17.6 kHz (fHRTIM=144MHz)
+ * @arg HRTIM_PRESCALERRATIO_MUL4: fHRCK: 576 MHz - Resolution: 1.73 ns - Min PWM frequency: 8.8 kHz (fHRTIM=144MHz)
+ * @arg HRTIM_PRESCALERRATIO_MUL2: fHRCK: 288 MHz - Resolution: 3.47 ns - Min PWM frequency: 4.4 kHz (fHRTIM=144MHz)
+ * @arg HRTIM_PRESCALERRATIO_DIV1: fHRCK: 144 MHz - Resolution: 6.95 ns - Min PWM frequency: 2.2 kHz (fHRTIM=144MHz)
+ * @arg HRTIM_PRESCALERRATIO_DIV2: fHRCK: 72 MHz - Resolution: 13.88 ns- Min PWM frequency: 1.1 kHz (fHRTIM=144MHz)
+ * @arg HRTIM_PRESCALERRATIO_DIV4: fHRCK: 36 MHz - Resolution: 27.7 ns- Min PWM frequency: 550Hz (fHRTIM=144MHz)
+ * @retval None
+ */
+#define __HAL_HRTIM_SetClockPrescaler(__HANDLE__, __TIMER__, __PRESCALER__) \
+ (((__TIMER__) == HRTIM_TIMERINDEX_MASTER) ? ((__HANDLE__)->Instance->sMasterRegs.MCR |= (__PRESCALER__)) :\
+ ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].TIMxCR |= (__PRESCALER__)))
+
+/** @brief Gets the HRTIM timer clock prescaler value on runtime
+ * @param __HANDLE__: HRTIM Handle.
+ * @param __TIMER__: HRTIM timer
+ * This parameter can be one of the following values:
+ * @arg 0x5 for master timer
+ * @arg 0x0 to 0x4 for timers A to E
+ * @retval timer clock prescaler value
+ */
+#define __HAL_HRTIM_GetClockPrescaler(__HANDLE__, __TIMER__) \
+ (((__TIMER__) == HRTIM_TIMERINDEX_MASTER) ? ((__HANDLE__)->Instance->sMasterRegs.MCR & HRTIM_MCR_CK_PSC) :\
+ ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].TIMxCR & HRTIM_TIMCR_CK_PSC))
+
+/** @brief Sets the HRTIM timer Compare Register value on runtime
+ * @param __HANDLE__: HRTIM Handle.
+ * @param __TIMER__: HRTIM timer
+ * This parameter can be one of the following values:
+ * @arg 0x0 to 0x4 for timers A to E
+ * @param __COMPAREUNIT__: timer compare unit
+ * This parameter can be one of the following values:
+ * @arg HRTIM_COMPAREUNIT_1: Compare unit 1
+ * @arg HRTIM_COMPAREUNIT_2: Compare unit 2
+ * @arg HRTIM_COMPAREUNIT_3: Compare unit 3
+ * @arg HRTIM_COMPAREUNIT_4: Compare unit 4
+ * @param __COMPARE__: specifies the Compare new value.
+ * @retval None
+ */
+#define __HAL_HRTIM_SetCompare(__HANDLE__, __TIMER__, __COMPAREUNIT__, __COMPARE__) \
+ (((__TIMER__) == HRTIM_TIMERINDEX_MASTER) ? \
+ (((__COMPAREUNIT__) == HRTIM_COMPAREUNIT_1) ? ((__HANDLE__)->Instance->sMasterRegs.MCMP1R = (__COMPARE__)) :\
+ ((__COMPAREUNIT__) == HRTIM_COMPAREUNIT_2) ? ((__HANDLE__)->Instance->sMasterRegs.MCMP2R = (__COMPARE__)) :\
+ ((__COMPAREUNIT__) == HRTIM_COMPAREUNIT_3) ? ((__HANDLE__)->Instance->sMasterRegs.MCMP3R = (__COMPARE__)) :\
+ ((__HANDLE__)->Instance->sMasterRegs.MCMP4R = (__COMPARE__))) \
+ : \
+ (((__COMPAREUNIT__) == HRTIM_COMPAREUNIT_1) ? ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].CMP1xR = (__COMPARE__)) :\
+ ((__COMPAREUNIT__) == HRTIM_COMPAREUNIT_2) ? ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].CMP2xR = (__COMPARE__)) :\
+ ((__COMPAREUNIT__) == HRTIM_COMPAREUNIT_3) ? ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].CMP3xR = (__COMPARE__)) :\
+ ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].CMP4xR = (__COMPARE__))))
+
+/** @brief Gets the HRTIM timer Compare Register value on runtime
+ * @param __HANDLE__: HRTIM Handle.
+ * @param __TIMER__: HRTIM timer
+ * This parameter can be one of the following values:
+ * @arg 0x0 to 0x4 for timers A to E
+ * @param __COMPAREUNIT__: timer compare unit
+ * This parameter can be one of the following values:
+ * @arg HRTIM_COMPAREUNIT_1: Compare unit 1
+ * @arg HRTIM_COMPAREUNIT_2: Compare unit 2
+ * @arg HRTIM_COMPAREUNIT_3: Compare unit 3
+ * @arg HRTIM_COMPAREUNIT_4: Compare unit 4
+ * @retval Compare value
+ */
+#define __HAL_HRTIM_GetCompare(__HANDLE__, __TIMER__, __COMPAREUNIT__) \
+ (((__TIMER__) == HRTIM_TIMERINDEX_MASTER) ? \
+ (((__COMPAREUNIT__) == HRTIM_COMPAREUNIT_1) ? ((__HANDLE__)->Instance->sMasterRegs.MCMP1R) :\
+ ((__COMPAREUNIT__) == HRTIM_COMPAREUNIT_2) ? ((__HANDLE__)->Instance->sMasterRegs.MCMP2R) :\
+ ((__COMPAREUNIT__) == HRTIM_COMPAREUNIT_3) ? ((__HANDLE__)->Instance->sMasterRegs.MCMP3R) :\
+ ((__HANDLE__)->Instance->sMasterRegs.MCMP4R)) \
+ : \
+ (((__COMPAREUNIT__) == HRTIM_COMPAREUNIT_1) ? ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].CMP1xR) :\
+ ((__COMPAREUNIT__) == HRTIM_COMPAREUNIT_2) ? ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].CMP2xR) :\
+ ((__COMPAREUNIT__) == HRTIM_COMPAREUNIT_3) ? ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].CMP3xR) :\
+ ((__HANDLE__)->Instance->sTimerxRegs[(__TIMER__)].CMP4xR)))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup HRTIM_Exported_Functions HRTIM Exported Functions
+* @{
+*/
+
+/** @addtogroup HRTIM_Exported_Functions_Group1 Initialization and de-initialization functions
+* @{
+*/
+
+/* Initialization and Configuration functions ********************************/
+HAL_StatusTypeDef HAL_HRTIM_Init(HRTIM_HandleTypeDef *hhrtim);
+
+HAL_StatusTypeDef HAL_HRTIM_DeInit (HRTIM_HandleTypeDef *hhrtim);
+
+void HAL_HRTIM_MspInit(HRTIM_HandleTypeDef *hhrtim);
+
+void HAL_HRTIM_MspDeInit(HRTIM_HandleTypeDef *hhrtim);
+
+HAL_StatusTypeDef HAL_HRTIM_TimeBaseConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ HRTIM_TimeBaseCfgTypeDef * pTimeBaseCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_DLLCalibrationStart(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t CalibrationRate);
+
+HAL_StatusTypeDef HAL_HRTIM_DLLCalibrationStart_IT(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t CalibrationRate);
+
+HAL_StatusTypeDef HAL_HRTIM_PollForDLLCalibration(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Timeout);
+
+/**
+ * @}
+ */
+
+/** @addtogroup HRTIM_Exported_Functions_Group2 Simple time base mode functions
+* @{
+*/
+
+/* Simple time base related functions *****************************************/
+HAL_StatusTypeDef HAL_HRTIM_SimpleBaseStart(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleBaseStop(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleBaseStart_IT(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleBaseStop_IT(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleBaseStart_DMA(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t SrcAddr,
+ uint32_t DestAddr,
+ uint32_t Length);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleBaseStop_DMA(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+
+/**
+ * @}
+ */
+
+/** @addtogroup HRTIM_Exported_Functions_Group3 Simple output compare mode functions
+* @{
+*/
+/* Simple output compare related functions ************************************/
+HAL_StatusTypeDef HAL_HRTIM_SimpleOCChannelConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t OCChannel,
+ HRTIM_SimpleOCChannelCfgTypeDef* pSimpleOCChannelCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleOCStart(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t OCChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleOCStop(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t OCChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleOCStart_IT(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t OCChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleOCStop_IT(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t OCChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleOCStart_DMA(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t OCChannel,
+ uint32_t SrcAddr,
+ uint32_t DestAddr,
+ uint32_t Length);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleOCStop_DMA(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t OCChannel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup HRTIM_Exported_Functions_Group4 Simple PWM output mode functions
+* @{
+*/
+/* Simple PWM output related functions ****************************************/
+HAL_StatusTypeDef HAL_HRTIM_SimplePWMChannelConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t PWMChannel,
+ HRTIM_SimplePWMChannelCfgTypeDef* pSimplePWMChannelCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_SimplePWMStart(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t PWMChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimplePWMStop(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t PWMChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimplePWMStart_IT(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t PWMChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimplePWMStop_IT(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t PWMChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimplePWMStart_DMA(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t PWMChannel,
+ uint32_t SrcAddr,
+ uint32_t DestAddr,
+ uint32_t Length);
+
+HAL_StatusTypeDef HAL_HRTIM_SimplePWMStop_DMA(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t PWMChannel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup HRTIM_Exported_Functions_Group5 Simple input capture functions
+* @{
+*/
+/* Simple capture related functions *******************************************/
+HAL_StatusTypeDef HAL_HRTIM_SimpleCaptureChannelConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t CaptureChannel,
+ HRTIM_SimpleCaptureChannelCfgTypeDef* pSimpleCaptureChannelCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleCaptureStart(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t CaptureChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleCaptureStop(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t CaptureChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleCaptureStart_IT(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t CaptureChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleCaptureStop_IT(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t CaptureChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleCaptureStart_DMA(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t CaptureChannel,
+ uint32_t SrcAddr,
+ uint32_t DestAddr,
+ uint32_t Length);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleCaptureStop_DMA(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t CaptureChannel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup HRTIM_Exported_Functions_Group6 Simple one pulse functions
+* @{
+*/
+/* Simple one pulse related functions *****************************************/
+HAL_StatusTypeDef HAL_HRTIM_SimpleOnePulseChannelConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t OnePulseChannel,
+ HRTIM_SimpleOnePulseChannelCfgTypeDef* pSimpleOnePulseChannelCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleOnePulseStart(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t OnePulseChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleOnePulseStop(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t OnePulseChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleOnePulseStart_IT(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t OnePulseChannel);
+
+HAL_StatusTypeDef HAL_HRTIM_SimpleOnePulseStop_IT(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t OnePulseChannel);
+
+/**
+ * @}
+ */
+
+/** @addtogroup HRTIM_Exported_Functions_Group7 Configuration functions
+* @{
+*/
+HAL_StatusTypeDef HAL_HRTIM_BurstModeConfig(HRTIM_HandleTypeDef *hhrtim,
+ HRTIM_BurstModeCfgTypeDef* pBurstModeCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_EventConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Event,
+ HRTIM_EventCfgTypeDef* pEventCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_EventPrescalerConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Prescaler);
+
+HAL_StatusTypeDef HAL_HRTIM_FaultConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Fault,
+ HRTIM_FaultCfgTypeDef* pFaultCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_FaultPrescalerConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Prescaler);
+
+void HAL_HRTIM_FaultModeCtl(HRTIM_HandleTypeDef * hhrtim,
+ uint32_t Faults,
+ uint32_t Enable);
+
+HAL_StatusTypeDef HAL_HRTIM_ADCTriggerConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t ADCTrigger,
+ HRTIM_ADCTriggerCfgTypeDef* pADCTriggerCfg);
+
+/**
+ * @}
+ */
+
+/** @addtogroup HRTIM_Exported_Functions_Group8 Timer waveform configuration and functions
+* @{
+*/
+/* Waveform related functions *************************************************/
+HAL_StatusTypeDef HAL_HRTIM_WaveformTimerConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ HRTIM_TimerCfgTypeDef * pTimerCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_WaveformCompareConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t CompareUnit,
+ HRTIM_CompareCfgTypeDef* pCompareCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_WaveformCaptureConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t CaptureUnit,
+ HRTIM_CaptureCfgTypeDef* pCaptureCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_WaveformOutputConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t Output,
+ HRTIM_OutputCfgTypeDef * pOutputCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_WaveformSetOutputLevel(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t Output,
+ uint32_t OutputLevel);
+
+HAL_StatusTypeDef HAL_HRTIM_TimerEventFilteringConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t Event,
+ HRTIM_TimerEventFilteringCfgTypeDef * pTimerEventFilteringCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_DeadTimeConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ HRTIM_DeadTimeCfgTypeDef* pDeadTimeCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_ChopperModeConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ HRTIM_ChopperModeCfgTypeDef* pChopperModeCfg);
+
+HAL_StatusTypeDef HAL_HRTIM_BurstDMAConfig(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t RegistersToUpdate);
+
+
+HAL_StatusTypeDef HAL_HRTIM_WaveformCounterStart(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Timers);
+
+HAL_StatusTypeDef HAL_HRTIM_WaveformCounterStop(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Timers);
+
+
+HAL_StatusTypeDef HAL_HRTIM_WaveformCounterStart_IT(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Timers);
+
+HAL_StatusTypeDef HAL_HRTIM_WaveformCounterStop_IT(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Timers);
+
+
+HAL_StatusTypeDef HAL_HRTIM_WaveformCounterStart_DMA(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Timers);
+
+HAL_StatusTypeDef HAL_HRTIM_WaveformCounterStop_DMA(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Timers);
+
+HAL_StatusTypeDef HAL_HRTIM_WaveformOutputStart(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t OutputsToStart);
+
+HAL_StatusTypeDef HAL_HRTIM_WaveformOutputStop(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t OutputsToStop);
+
+HAL_StatusTypeDef HAL_HRTIM_BurstModeCtl(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Enable);
+
+HAL_StatusTypeDef HAL_HRTIM_BurstModeSoftwareTrigger(HRTIM_HandleTypeDef *hhrtim);
+
+HAL_StatusTypeDef HAL_HRTIM_SoftwareCapture(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t CaptureUnit);
+
+HAL_StatusTypeDef HAL_HRTIM_SoftwareUpdate(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Timers);
+
+HAL_StatusTypeDef HAL_HRTIM_SoftwareReset(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Timers);
+
+HAL_StatusTypeDef HAL_HRTIM_BurstDMATransfer(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t BurstBufferAddress,
+ uint32_t BurstBufferLength);
+
+HAL_StatusTypeDef HAL_HRTIM_UpdateEnable(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Timers);
+
+HAL_StatusTypeDef HAL_HRTIM_UpdateDisable(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t Timers);
+
+/**
+ * @}
+ */
+
+/** @addtogroup HRTIM_Exported_Functions_Group9 Peripheral state functions
+* @{
+*/
+/* HRTIM peripheral state functions */
+HAL_HRTIM_StateTypeDef HAL_HRTIM_GetState(HRTIM_HandleTypeDef* hhrtim);
+
+uint32_t HAL_HRTIM_GetCapturedValue(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t CaptureUnit);
+
+uint32_t HAL_HRTIM_WaveformGetOutputLevel(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t Output);
+
+uint32_t HAL_HRTIM_WaveformGetOutputState(HRTIM_HandleTypeDef * hhrtim,
+ uint32_t TimerIdx,
+ uint32_t Output);
+
+uint32_t HAL_HRTIM_GetDelayedProtectionStatus(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx,
+ uint32_t Output);
+
+uint32_t HAL_HRTIM_GetBurstStatus(HRTIM_HandleTypeDef *hhrtim);
+
+uint32_t HAL_HRTIM_GetCurrentPushPullStatus(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+
+uint32_t HAL_HRTIM_GetIdlePushPullStatus(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+
+/**
+ * @}
+ */
+
+/** @addtogroup HRTIM_Exported_Functions_Group10 Interrupts handling
+* @{
+*/
+/* IRQ handler */
+void HAL_HRTIM_IRQHandler(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+
+/* HRTIM events related callback functions */
+void HAL_HRTIM_Fault1Callback(HRTIM_HandleTypeDef *hhrtim);
+void HAL_HRTIM_Fault2Callback(HRTIM_HandleTypeDef *hhrtim);
+void HAL_HRTIM_Fault3Callback(HRTIM_HandleTypeDef *hhrtim);
+void HAL_HRTIM_Fault4Callback(HRTIM_HandleTypeDef *hhrtim);
+void HAL_HRTIM_Fault5Callback(HRTIM_HandleTypeDef *hhrtim);
+void HAL_HRTIM_SystemFaultCallback(HRTIM_HandleTypeDef *hhrtim);
+void HAL_HRTIM_DLLCalbrationReadyCallback(HRTIM_HandleTypeDef *hhrtim);
+void HAL_HRTIM_BurstModePeriodCallback(HRTIM_HandleTypeDef *hhrtim);
+void HAL_HRTIM_SynchronizationEventCallback(HRTIM_HandleTypeDef *hhrtim);
+
+/* Timer events related callback functions */
+void HAL_HRTIM_RegistersUpdateCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_RepetitionEventCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_Compare1EventCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_Compare2EventCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_Compare3EventCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_Compare4EventCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_Capture1EventCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_Capture2EventCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_DelayedProtectionCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_CounterResetCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_Output1SetCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_Output1ResetCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_Output2SetCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_Output2ResetCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_BurstDMATransferCallback(HRTIM_HandleTypeDef *hhrtim,
+ uint32_t TimerIdx);
+void HAL_HRTIM_ErrorCallback(HRTIM_HandleTypeDef *hhrtim);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(STM32F334x8) */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_HRTIM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_i2c.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,591 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_i2c.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of I2C HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_I2C_H
+#define __STM32F3xx_HAL_I2C_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2C
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2C_Exported_Types I2C Exported Types
+ * @{
+ */
+
+/** @defgroup I2C_Configuration_Structure_definition I2C Configuration Structure definition
+ * @brief I2C Configuration Structure definition
+ * @{
+ */
+typedef struct
+{
+ uint32_t Timing; /*!< Specifies the I2C_TIMINGR_register value.
+ This parameter calculated by referring to I2C initialization
+ section in Reference manual */
+
+ uint32_t OwnAddress1; /*!< Specifies the first device own address.
+ This parameter can be a 7-bit or 10-bit address. */
+
+ uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected.
+ This parameter can be a value of @ref I2C_addressing_mode */
+
+ uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
+ This parameter can be a value of @ref I2C_dual_addressing_mode */
+
+ uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
+ This parameter can be a 7-bit address. */
+
+ uint32_t OwnAddress2Masks; /*!< Specifies the acknoledge mask address second device own address if dual addressing mode is selected
+ This parameter can be a value of @ref I2C_own_address2_masks. */
+
+ uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
+ This parameter can be a value of @ref I2C_general_call_addressing_mode. */
+
+ uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
+ This parameter can be a value of @ref I2C_nostretch_mode */
+
+}I2C_InitTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup HAL_state_structure_definition HAL state structure definition
+ * @brief HAL State structure definition
+ * @{
+ */
+
+typedef enum
+{
+ HAL_I2C_STATE_RESET = 0x00, /*!< I2C not yet initialized or disabled */
+ HAL_I2C_STATE_READY = 0x01, /*!< I2C initialized and ready for use */
+ HAL_I2C_STATE_BUSY = 0x02, /*!< I2C internal process is ongoing */
+ HAL_I2C_STATE_MASTER_BUSY_TX = 0x12, /*!< Master Data Transmission process is ongoing */
+ HAL_I2C_STATE_MASTER_BUSY_RX = 0x22, /*!< Master Data Reception process is ongoing */
+ HAL_I2C_STATE_SLAVE_BUSY_TX = 0x32, /*!< Slave Data Transmission process is ongoing */
+ HAL_I2C_STATE_SLAVE_BUSY_RX = 0x42, /*!< Slave Data Reception process is ongoing */
+ HAL_I2C_STATE_MEM_BUSY_TX = 0x52, /*!< Memory Data Transmission process is ongoing */
+ HAL_I2C_STATE_MEM_BUSY_RX = 0x62, /*!< Memory Data Reception process is ongoing */
+ HAL_I2C_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_I2C_STATE_ERROR = 0x04 /*!< Reception process is ongoing */
+
+}HAL_I2C_StateTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Error_Code_structure_definition I2C Error Code structure definition
+ * @brief I2C Error Code structure definition
+ * @{
+ */
+
+typedef enum
+{
+ HAL_I2C_ERROR_NONE = 0x00, /*!< No error */
+ HAL_I2C_ERROR_BERR = 0x01, /*!< BERR error */
+ HAL_I2C_ERROR_ARLO = 0x02, /*!< ARLO error */
+ HAL_I2C_ERROR_AF = 0x04, /*!< AF error */
+ HAL_I2C_ERROR_OVR = 0x08, /*!< OVR error */
+ HAL_I2C_ERROR_DMA = 0x10, /*!< DMA transfer error */
+ HAL_I2C_ERROR_TIMEOUT = 0x20, /*!< Timeout error */
+ HAL_I2C_ERROR_SIZE = 0x40 /*!< Size Management error */
+}HAL_I2C_ErrorTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_handle_Structure_definition I2C handle Structure definition
+ * @brief I2C handle Structure definition
+ * @{
+ */
+
+typedef struct
+{
+ I2C_TypeDef *Instance; /*!< I2C registers base address */
+
+ I2C_InitTypeDef Init; /*!< I2C communication parameters */
+
+ uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */
+
+ uint16_t XferSize; /*!< I2C transfer size */
+
+ __IO uint16_t XferCount; /*!< I2C transfer counter */
+
+ DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< I2C locking object */
+
+ __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */
+
+ __IO HAL_I2C_ErrorTypeDef ErrorCode; /* I2C Error code */
+
+}I2C_HandleTypeDef;
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Constants I2C Exported Constants
+ * @{
+ */
+
+/** @defgroup I2C_addressing_mode I2C addressing mode
+ * @{
+ */
+#define I2C_ADDRESSINGMODE_7BIT ((uint32_t)0x00000001)
+#define I2C_ADDRESSINGMODE_10BIT ((uint32_t)0x00000002)
+
+#define IS_I2C_ADDRESSING_MODE(MODE) (((MODE) == I2C_ADDRESSINGMODE_7BIT) || \
+ ((MODE) == I2C_ADDRESSINGMODE_10BIT))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_dual_addressing_mode I2C dual addressing mode
+ * @{
+ */
+
+#define I2C_DUALADDRESS_DISABLED ((uint32_t)0x00000000)
+#define I2C_DUALADDRESS_ENABLED I2C_OAR2_OA2EN
+
+#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLED) || \
+ ((ADDRESS) == I2C_DUALADDRESS_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_own_address2_masks I2C own address2 masks
+ * @{
+ */
+
+#define I2C_OA2_NOMASK ((uint8_t)0x00)
+#define I2C_OA2_MASK01 ((uint8_t)0x01)
+#define I2C_OA2_MASK02 ((uint8_t)0x02)
+#define I2C_OA2_MASK03 ((uint8_t)0x03)
+#define I2C_OA2_MASK04 ((uint8_t)0x04)
+#define I2C_OA2_MASK05 ((uint8_t)0x05)
+#define I2C_OA2_MASK06 ((uint8_t)0x06)
+#define I2C_OA2_MASK07 ((uint8_t)0x07)
+
+#define IS_I2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == I2C_OA2_NOMASK) || \
+ ((MASK) == I2C_OA2_MASK01) || \
+ ((MASK) == I2C_OA2_MASK02) || \
+ ((MASK) == I2C_OA2_MASK03) || \
+ ((MASK) == I2C_OA2_MASK04) || \
+ ((MASK) == I2C_OA2_MASK05) || \
+ ((MASK) == I2C_OA2_MASK06) || \
+ ((MASK) == I2C_OA2_MASK07))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_general_call_addressing_mode I2C general call addressing mode
+ * @{
+ */
+#define I2C_GENERALCALL_DISABLED ((uint32_t)0x00000000)
+#define I2C_GENERALCALL_ENABLED I2C_CR1_GCEN
+
+#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLED) || \
+ ((CALL) == I2C_GENERALCALL_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_nostretch_mode I2C nostretch mode
+ * @{
+ */
+#define I2C_NOSTRETCH_DISABLED ((uint32_t)0x00000000)
+#define I2C_NOSTRETCH_ENABLED I2C_CR1_NOSTRETCH
+
+#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLED) || \
+ ((STRETCH) == I2C_NOSTRETCH_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Memory_Address_Size I2C Memory Address Size
+ * @{
+ */
+#define I2C_MEMADD_SIZE_8BIT ((uint32_t)0x00000001)
+#define I2C_MEMADD_SIZE_16BIT ((uint32_t)0x00000002)
+
+#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \
+ ((SIZE) == I2C_MEMADD_SIZE_16BIT))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_ReloadEndMode_definition I2C ReloadEndMode definition
+ * @{
+ */
+
+#define I2C_RELOAD_MODE I2C_CR2_RELOAD
+#define I2C_AUTOEND_MODE I2C_CR2_AUTOEND
+#define I2C_SOFTEND_MODE ((uint32_t)0x00000000)
+
+#define IS_TRANSFER_MODE(MODE) (((MODE) == I2C_RELOAD_MODE) || \
+ ((MODE) == I2C_AUTOEND_MODE) || \
+ ((MODE) == I2C_SOFTEND_MODE))
+/**
+ * @}
+ */
+
+/** @defgroup I2C_StartStopMode_definition I2C StartStopMode definition
+ * @{
+ */
+
+#define I2C_NO_STARTSTOP ((uint32_t)0x00000000)
+#define I2C_GENERATE_STOP I2C_CR2_STOP
+#define I2C_GENERATE_START_READ (uint32_t)(I2C_CR2_START | I2C_CR2_RD_WRN)
+#define I2C_GENERATE_START_WRITE I2C_CR2_START
+
+#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == I2C_GENERATE_STOP) || \
+ ((REQUEST) == I2C_GENERATE_START_READ) || \
+ ((REQUEST) == I2C_GENERATE_START_WRITE) || \
+ ((REQUEST) == I2C_NO_STARTSTOP))
+
+/**
+ * @}
+ */
+
+/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition
+ * @brief I2C Interrupt definition
+ * Elements values convention: 0xXXXXXXXX
+ * - XXXXXXXX : Interrupt control mask
+ * @{
+ */
+#define I2C_IT_ERRI I2C_CR1_ERRIE
+#define I2C_IT_TCI I2C_CR1_TCIE
+#define I2C_IT_STOPI I2C_CR1_STOPIE
+#define I2C_IT_NACKI I2C_CR1_NACKIE
+#define I2C_IT_ADDRI I2C_CR1_ADDRIE
+#define I2C_IT_RXI I2C_CR1_RXIE
+#define I2C_IT_TXI I2C_CR1_TXIE
+
+/**
+ * @}
+ */
+
+
+/** @defgroup I2C_Flag_definition I2C Flag definition
+ * @{
+ */
+
+#define I2C_FLAG_TXE I2C_ISR_TXE
+#define I2C_FLAG_TXIS I2C_ISR_TXIS
+#define I2C_FLAG_RXNE I2C_ISR_RXNE
+#define I2C_FLAG_ADDR I2C_ISR_ADDR
+#define I2C_FLAG_AF I2C_ISR_NACKF
+#define I2C_FLAG_STOPF I2C_ISR_STOPF
+#define I2C_FLAG_TC I2C_ISR_TC
+#define I2C_FLAG_TCR I2C_ISR_TCR
+#define I2C_FLAG_BERR I2C_ISR_BERR
+#define I2C_FLAG_ARLO I2C_ISR_ARLO
+#define I2C_FLAG_OVR I2C_ISR_OVR
+#define I2C_FLAG_PECERR I2C_ISR_PECERR
+#define I2C_FLAG_TIMEOUT I2C_ISR_TIMEOUT
+#define I2C_FLAG_ALERT I2C_ISR_ALERT
+#define I2C_FLAG_BUSY I2C_ISR_BUSY
+#define I2C_FLAG_DIR I2C_ISR_DIR
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup I2C_Exported_Macros I2C Exported Macros
+ * @{
+ */
+
+/** @brief Reset I2C handle state
+ * @param __HANDLE__: I2C handle.
+ * @retval None
+ */
+#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET)
+
+/** @brief Enables or disables the specified I2C interrupts.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2Cx where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg I2C_IT_ERRI: Errors interrupt enable
+ * @arg I2C_IT_TCI: Transfer complete interrupt enable
+ * @arg I2C_IT_STOPI: STOP detection interrupt enable
+ * @arg I2C_IT_NACKI: NACK received interrupt enable
+ * @arg I2C_IT_ADDRI: Address match interrupt enable
+ * @arg I2C_IT_RXI: RX interrupt enable
+ * @arg I2C_IT_TXI: TX interrupt enable
+ *
+ * @retval None
+ */
+
+#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
+#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
+
+/** @brief Checks if the specified I2C interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2Cx where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __INTERRUPT__: specifies the I2C interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2C_IT_ERRI: Errors interrupt enable
+ * @arg I2C_IT_TCI: Transfer complete interrupt enable
+ * @arg I2C_IT_STOPI: STOP detection interrupt enable
+ * @arg I2C_IT_NACKI: NACK received interrupt enable
+ * @arg I2C_IT_ADDRI: Address match interrupt enable
+ * @arg I2C_IT_RXI: RX interrupt enable
+ * @arg I2C_IT_TXI: TX interrupt enable
+ *
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified I2C flag is set or not.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2Cx where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2C_FLAG_TXE: Transmit data register empty
+ * @arg I2C_FLAG_TXIS: Transmit interrupt status
+ * @arg I2C_FLAG_RXNE: Receive data register not empty
+ * @arg I2C_FLAG_ADDR: Address matched (slave mode)
+ * @arg I2C_FLAG_AF: Acknowledge failure received flag
+ * @arg I2C_FLAG_STOPF: STOP detection flag
+ * @arg I2C_FLAG_TC: Transfer complete (master mode)
+ * @arg I2C_FLAG_TCR: Transfer complete reload
+ * @arg I2C_FLAG_BERR: Bus error
+ * @arg I2C_FLAG_ARLO: Arbitration lost
+ * @arg I2C_FLAG_OVR: Overrun/Underrun
+ * @arg I2C_FLAG_PECERR: PEC error in reception
+ * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow detection flag
+ * @arg I2C_FLAG_ALERT: SMBus alert
+ * @arg I2C_FLAG_BUSY: Bus busy
+ * @arg I2C_FLAG_DIR: Transfer direction (slave mode)
+ *
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->ISR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the I2C pending flags which are cleared by writing 1 in a specific bit.
+ * @param __HANDLE__: specifies the I2C Handle.
+ * This parameter can be I2Cx where x: 1, 2, or 3 to select the I2C peripheral.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg I2C_FLAG_ADDR: Address matched (slave mode)
+ * @arg I2C_FLAG_AF: Acknowledge failure flag
+ * @arg I2C_FLAG_STOPF: STOP detection flag
+ * @arg I2C_FLAG_BERR: Bus error
+ * @arg I2C_FLAG_ARLO: Arbitration lost
+ * @arg I2C_FLAG_OVR: Overrun/Underrun
+ * @arg I2C_FLAG_PECERR: PEC error in reception
+ * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow detection flag
+ * @arg I2C_FLAG_ALERT: SMBus alert
+ *
+ * @retval None
+ */
+#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+
+#define __HAL_I2C_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= I2C_CR1_PE)
+#define __HAL_I2C_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~I2C_CR1_PE)
+
+#define __HAL_I2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
+
+#define __HAL_I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00))) >> 8)))
+#define __HAL_I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FF))))
+
+#define __HAL_I2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == I2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
+ (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
+
+#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= (uint32_t)0x000003FF)
+#define IS_I2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FF)
+/**
+ * @}
+ */
+
+/* Include I2C HAL Extended module */
+#include "stm32f3xx_hal_i2c_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2C_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2C_DeInit (I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c);
+
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+
+/** @addtogroup Blocking_mode_Polling Blocking mode Polling
+ * @{
+ */
+
+ /******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+
+/**
+ * @}
+ */
+
+/** @addtogroup Non_Blocking_mode_Interrupt Non Blocking mode Interrupt
+ * @{
+ */
+
+ /******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+
+/**
+ * @}
+ */
+
+/** @addtogroup Non_Blocking_mode_DMA Non Blocking mode DMA
+ * @{
+ */
+ /******* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size);
+/**
+ * @}
+ */
+
+/** @addtogroup IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
+ * @{
+ */
+ /******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c);
+void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup I2C_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @{
+ */
+
+/* Peripheral State and Errors functions **************************************/
+HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c);
+uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_I2C_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_i2c_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,128 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_i2c_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of I2C HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_I2C_EX_H
+#define __STM32F3xx_HAL_I2C_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2CEx I2C Extended HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup I2CEx_Exported_Constants I2C Extended Exported Constants
+ * @{
+ */
+
+/** @defgroup I2CEx_Analog_Filter I2C Extended Analog Filter
+ * @{
+ */
+#define I2C_ANALOGFILTER_ENABLED ((uint32_t)0x00000000)
+#define I2C_ANALOGFILTER_DISABLED I2C_CR1_ANFOFF
+
+#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLED) || \
+ ((FILTER) == I2C_ANALOGFILTER_DISABLED))
+/**
+ * @}
+ */
+
+/** @defgroup I2CEx_Digital_Filter I2C Extended Digital Filter
+ * @{
+ */
+#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup I2CEx_Exported_Functions I2C Extended Exported Functions
+ * @{
+ */
+
+/** @addtogroup I2CEx_Exported_Functions_Group1 Extended features functions
+ * @{
+ */
+
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_I2CEx_AnalogFilter_Config(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter);
+HAL_StatusTypeDef HAL_I2CEx_DigitalFilter_Config(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter);
+HAL_StatusTypeDef HAL_I2CEx_EnableWakeUp (I2C_HandleTypeDef *hi2c);
+HAL_StatusTypeDef HAL_I2CEx_DisableWakeUp (I2C_HandleTypeDef *hi2c);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_I2C_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_i2s.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,477 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_i2s.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of I2S HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_I2S_H
+#define __STM32F3xx_HAL_I2S_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2S I2S HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup I2S_Exported_Types I2S Exported Types
+ * @{
+ */
+
+/**
+ * @brief I2S Init structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Specifies the I2S operating mode.
+ This parameter can be a value of @ref I2S_Mode */
+
+ uint32_t Standard; /*!< Specifies the standard used for the I2S communication.
+ This parameter can be a value of @ref I2S_Standard */
+
+ uint32_t DataFormat; /*!< Specifies the data format for the I2S communication.
+ This parameter can be a value of @ref I2S_Data_Format */
+
+ uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not.
+ This parameter can be a value of @ref I2S_MCLK_Output */
+
+ uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication.
+ This parameter can be a value of @ref I2S_Audio_Frequency */
+
+ uint32_t CPOL; /*!< Specifies the idle state of the I2S clock.
+ This parameter can be a value of @ref I2S_Clock_Polarity */
+
+ uint32_t ClockSource; /*!< Specifies the I2S Clock Source.
+ This parameter can be a value of @ref I2S_Clock_Source */
+
+ uint32_t FullDuplexMode; /*!< Specifies the I2S FullDuplex mode.
+ This parameter can be a value of @ref I2S_FullDuplex_Mode */
+
+}I2S_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_I2S_STATE_RESET = 0x00, /*!< I2S not yet initialized or disabled */
+ HAL_I2S_STATE_READY = 0x01, /*!< I2S initialized and ready for use */
+ HAL_I2S_STATE_BUSY = 0x02, /*!< I2S internal process is ongoing */
+ HAL_I2S_STATE_BUSY_TX = 0x03, /*!< Data Transmission process is ongoing */
+ HAL_I2S_STATE_BUSY_RX = 0x04, /*!< Data Reception process is ongoing */
+ HAL_I2S_STATE_BUSY_TX_RX = 0x05, /*!< Data Transmission and Reception process is ongoing */
+ HAL_I2S_STATE_TIMEOUT = 0x06, /*!< I2S timeout state */
+ HAL_I2S_STATE_ERROR = 0x07 /*!< I2S error state */
+
+}HAL_I2S_StateTypeDef;
+
+/**
+ * @brief HAL I2S Error Code structure definition
+ */
+typedef enum
+{
+ HAL_I2S_ERROR_NONE = 0x00, /*!< No error */
+ HAL_I2S_ERROR_TIMEOUT = 0x01, /*!< Timeout error */
+ HAL_I2S_ERROR_OVR = 0x02, /*!< OVR error */
+ HAL_I2S_ERROR_UDR = 0x04, /*!< UDR error */
+ HAL_I2S_ERROR_DMA = 0x08, /*!< DMA transfer error */
+ HAL_I2S_ERROR_UNKNOW = 0x10 /*!< Unknow Error error */
+}HAL_I2S_ErrorTypeDef;
+
+/**
+ * @brief I2S handle Structure definition
+ */
+typedef struct
+{
+ SPI_TypeDef *Instance; /* I2S registers base address */
+
+ I2S_InitTypeDef Init; /* I2S communication parameters */
+
+ uint16_t *pTxBuffPtr; /* Pointer to I2S Tx transfer buffer */
+
+ __IO uint16_t TxXferSize; /* I2S Tx transfer size */
+
+ __IO uint16_t TxXferCount; /* I2S Tx transfer Counter */
+
+ uint16_t *pRxBuffPtr; /* Pointer to I2S Rx transfer buffer */
+
+ __IO uint16_t RxXferSize; /* I2S Rx transfer size */
+
+ __IO uint16_t RxXferCount; /* I2S Rx transfer counter
+ (This field is initialized at the
+ same value as transfer size at the
+ beginning of the transfer and
+ decremented when a sample is received.
+ NbSamplesReceived = RxBufferSize-RxBufferCount) */
+
+ DMA_HandleTypeDef *hdmatx; /* I2S Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* I2S Rx DMA handle parameters */
+
+ __IO HAL_LockTypeDef Lock; /* I2S locking object */
+
+ __IO HAL_I2S_StateTypeDef State; /* I2S communication state */
+
+ __IO HAL_I2S_ErrorTypeDef ErrorCode; /* I2S Error code */
+
+}I2S_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup I2S_Exported_Constants I2S Exported Constants
+ * @{
+ */
+
+/** @defgroup I2S_Clock_Source I2S Clock Source
+ * @{
+ */
+#define I2S_CLOCK_EXTERNAL ((uint32_t)0x00000001)
+#define I2S_CLOCK_SYSCLK ((uint32_t)0x00000002)
+
+#define IS_I2S_CLOCKSOURCE(CLOCK) (((CLOCK) == I2S_CLOCK_EXTERNAL) || \
+ ((CLOCK) == I2S_CLOCK_SYSCLK))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Mode I2S Mode
+ * @{
+ */
+#define I2S_MODE_SLAVE_TX ((uint32_t)0x00000000)
+#define I2S_MODE_SLAVE_RX ((uint32_t)0x00000100)
+#define I2S_MODE_MASTER_TX ((uint32_t)0x00000200)
+#define I2S_MODE_MASTER_RX ((uint32_t)0x00000300)
+
+#define IS_I2S_MODE(MODE) (((MODE) == I2S_MODE_SLAVE_TX) || \
+ ((MODE) == I2S_MODE_SLAVE_RX) || \
+ ((MODE) == I2S_MODE_MASTER_TX)|| \
+ ((MODE) == I2S_MODE_MASTER_RX))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Standard I2S Standard
+ * @{
+ */
+#define I2S_STANDARD_PHILIPS ((uint32_t)0x00000000)
+#define I2S_STANDARD_MSB ((uint32_t)0x00000010)
+#define I2S_STANDARD_LSB ((uint32_t)0x00000020)
+#define I2S_STANDARD_PCM_SHORT ((uint32_t)0x00000030)
+#define I2S_STANDARD_PCM_LONG ((uint32_t)0x000000B0)
+
+#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_STANDARD_PHILIPS) || \
+ ((STANDARD) == I2S_STANDARD_MSB) || \
+ ((STANDARD) == I2S_STANDARD_LSB) || \
+ ((STANDARD) == I2S_STANDARD_PCM_SHORT) || \
+ ((STANDARD) == I2S_STANDARD_PCM_LONG))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Data_Format I2S Data Format
+ * @{
+ */
+#define I2S_DATAFORMAT_16B ((uint32_t)0x00000000)
+#define I2S_DATAFORMAT_16B_EXTENDED ((uint32_t)0x00000001)
+#define I2S_DATAFORMAT_24B ((uint32_t)0x00000003)
+#define I2S_DATAFORMAT_32B ((uint32_t)0x00000005)
+
+#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DATAFORMAT_16B) || \
+ ((FORMAT) == I2S_DATAFORMAT_16B_EXTENDED) || \
+ ((FORMAT) == I2S_DATAFORMAT_24B) || \
+ ((FORMAT) == I2S_DATAFORMAT_32B))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_MCLK_Output I2S MCLK Output
+ * @{
+ */
+#define I2S_MCLKOUTPUT_ENABLE ((uint32_t)SPI_I2SPR_MCKOE)
+#define I2S_MCLKOUTPUT_DISABLE ((uint32_t)0x00000000)
+
+#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOUTPUT_ENABLE) || \
+ ((OUTPUT) == I2S_MCLKOUTPUT_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Audio_Frequency I2S Audio Frequency
+ * @{
+ */
+#define I2S_AUDIOFREQ_192K ((uint32_t)192000)
+#define I2S_AUDIOFREQ_96K ((uint32_t)96000)
+#define I2S_AUDIOFREQ_48K ((uint32_t)48000)
+#define I2S_AUDIOFREQ_44K ((uint32_t)44100)
+#define I2S_AUDIOFREQ_32K ((uint32_t)32000)
+#define I2S_AUDIOFREQ_22K ((uint32_t)22050)
+#define I2S_AUDIOFREQ_16K ((uint32_t)16000)
+#define I2S_AUDIOFREQ_11K ((uint32_t)11025)
+#define I2S_AUDIOFREQ_8K ((uint32_t)8000)
+#define I2S_AUDIOFREQ_DEFAULT ((uint32_t)2)
+
+#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AUDIOFREQ_8K) && \
+ ((FREQ) <= I2S_AUDIOFREQ_192K)) || \
+ ((FREQ) == I2S_AUDIOFREQ_DEFAULT))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_FullDuplex_Mode I2S Full Duplex Mode
+ * @{
+ */
+#define I2S_FULLDUPLEXMODE_DISABLE ((uint32_t)0x00000000)
+#define I2S_FULLDUPLEXMODE_ENABLE ((uint32_t)0x00000001)
+
+#define IS_I2S_FULLDUPLEX_MODE(MODE) (((MODE) == I2S_FULLDUPLEXMODE_DISABLE) || \
+ ((MODE) == I2S_FULLDUPLEXMODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Clock_Polarity I2S Clock Polarity
+ * @{
+ */
+#define I2S_CPOL_LOW ((uint32_t)0x00000000)
+#define I2S_CPOL_HIGH ((uint32_t)SPI_I2SCFGR_CKPOL)
+
+#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_LOW) || \
+ ((CPOL) == I2S_CPOL_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Interrupt_configuration_definition I2S Interrupt configuration definition
+ * @{
+ */
+#define I2S_IT_TXE SPI_CR2_TXEIE
+#define I2S_IT_RXNE SPI_CR2_RXNEIE
+#define I2S_IT_ERR SPI_CR2_ERRIE
+/**
+ * @}
+ */
+
+/** @defgroup I2S_Flag_definition I2S Flag definition
+ * @{
+ */
+#define I2S_FLAG_TXE SPI_SR_TXE
+#define I2S_FLAG_RXNE SPI_SR_RXNE
+
+#define I2S_FLAG_UDR SPI_SR_UDR
+#define I2S_FLAG_OVR SPI_SR_OVR
+#define I2S_FLAG_FRE SPI_SR_FRE
+
+#define I2S_FLAG_CHSIDE SPI_SR_CHSIDE
+#define I2S_FLAG_BSY SPI_SR_BSY
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup I2S_Exported_Macros I2S Exported Macros
+ * @{
+ */
+
+/** @brief Reset I2S handle state
+ * @param __HANDLE__: I2S handle.
+ * @retval None
+ */
+#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET)
+
+/** @brief Enable or disable the specified SPI peripheral (in I2S mode).
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR |= SPI_I2SCFGR_I2SE)
+#define __HAL_I2S_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR &= ~SPI_I2SCFGR_I2SE)
+
+/** @brief Enable or disable the specified I2S interrupts.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= ~(__INTERRUPT__))
+
+/** @brief Checks if the specified I2S interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral.
+ * @param __INTERRUPT__: specifies the I2S interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified I2S flag is set or not.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_FLAG_RXNE: Receive buffer not empty flag
+ * @arg I2S_FLAG_TXE: Transmit buffer empty flag
+ * @arg I2S_FLAG_UDR: Underrun flag
+ * @arg I2S_FLAG_OVR: Overrun flag
+ * @arg I2S_FLAG_FRE: Frame error flag
+ * @arg I2S_FLAG_CHSIDE: Channel Side flag
+ * @arg I2S_FLAG_BSY: Busy flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the I2S OVR pending flag.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) do{(__HANDLE__)->Instance->DR;\
+ (__HANDLE__)->Instance->SR;}while(0)
+/** @brief Clears the I2S UDR pending flag.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__)((__HANDLE__)->Instance->SR)
+/**
+ * @}
+ */
+
+/* Include I2S HAL Extended module */
+#include "stm32f3xx_hal_i2s_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup I2S_Exported_Functions I2S Exported Functions
+ * @{
+ */
+
+/** @addtogroup I2S_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DeInit (I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+
+/** @addtogroup I2S_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+/* I/O operation functions ***************************************************/
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout);
+
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size);
+
+/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/
+void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+
+/** @addtogroup I2S_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @{
+ */
+/* Peripheral Control and State functions ************************************/
+HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s);
+HAL_I2S_ErrorTypeDef HAL_I2S_GetError(I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_I2S_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_i2s_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,225 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_i2s_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of I2S HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_I2S_EX_H
+#define __STM32F3xx_HAL_I2S_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup I2SEx I2S Extended HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup I2SEx_Exported_Macros I2S Extended Exported Macros
+ * @{
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define I2SxEXT(__INSTANCE__) ((__INSTANCE__) == (SPI2)? (SPI_TypeDef *)(I2S2ext_BASE): (SPI_TypeDef *)(I2S3ext_BASE))
+
+/** @brief Enable or disable the specified I2SExt peripheral.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2SEXT_ENABLE(__HANDLE__) (I2SxEXT((__HANDLE__)->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE)
+#define __HAL_I2SEXT_DISABLE(__HANDLE__) (I2SxEXT((__HANDLE__)->Instance)->I2SCFGR &= ~SPI_I2SCFGR_I2SE)
+
+/** @brief Enable or disable the specified I2SExt interrupts.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_I2SEXT_ENABLE_IT(__HANDLE__, __INTERRUPT__) (I2SxEXT((__HANDLE__)->Instance)->CR2 |= (__INTERRUPT__))
+#define __HAL_I2SEXT_DISABLE_IT(__HANDLE__, __INTERRUPT__) (I2SxEXT((__HANDLE__)->Instance)->CR2 &= ~(__INTERRUPT__))
+
+/** @brief Checks if the specified I2SExt interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral.
+ * @param __INTERRUPT__: specifies the I2S interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_IT_TXE: Tx buffer empty interrupt enable
+ * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg I2S_IT_ERR: Error interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_I2SEXT_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((I2SxEXT((__HANDLE__)->Instance)->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified I2SExt flag is set or not.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg I2S_FLAG_RXNE: Receive buffer not empty flag
+ * @arg I2S_FLAG_TXE: Transmit buffer empty flag
+ * @arg I2S_FLAG_UDR: Underrun flag
+ * @arg I2S_FLAG_OVR: Overrun flag
+ * @arg I2S_FLAG_FRE: Frame error flag
+ * @arg I2S_FLAG_CHSIDE: Channel Side flag
+ * @arg I2S_FLAG_BSY: Busy flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_I2SEXT_GET_FLAG(__HANDLE__, __FLAG__) (((I2SxEXT((__HANDLE__)->Instance)->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the I2SExt OVR pending flag.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2SEXT_CLEAR_OVRFLAG(__HANDLE__) do{(I2SxEXT((__HANDLE__)->Instance)->DR;\
+ (I2SxEXT((__HANDLE__)->Instance)->SR;}while(0)
+/** @brief Clears the I2SExt UDR pending flag.
+ * @param __HANDLE__: specifies the I2S Handle.
+ * @retval None
+ */
+#define __HAL_I2SEXT_CLEAR_UDRFLAG(__HANDLE__)(I2SxEXT((__HANDLE__)->Instance)->SR)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+ /**
+ * @}
+ */
+
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization/de-initialization functions ********************************/
+/** @addtogroup I2SEx_Exported_Functions I2S Extended Exported Functions
+ * @{
+ */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+/** @addtogroup I2SEx_Exported_Functions_Group1 Extended features functions
+ * @{
+ */
+
+/* Extended features functions ************************************************/
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size, uint32_t Timeout);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size);
+/**
+ * @}
+ */
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup I2S I2S HAL module driver
+ * @{
+ */
+
+/** @addtogroup I2S_Exported_Functions I2S Exported Functions
+ * @{
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+/** @addtogroup I2S_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+/* I2S IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
+void HAL_I2S_FullDuplex_IRQHandler(I2S_HandleTypeDef *hi2s);
+void HAL_I2S_TxRxCpltCallback(I2S_HandleTypeDef *hi2s);
+/**
+ * @}
+ */
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+/** @addtogroup I2S_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @{
+ */
+/* Peripheral Control and State functions ************************************/
+HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s);
+HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_I2S_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_irda.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,626 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_irda.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of IRDA HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_IRDA_H
+#define __STM32F3xx_HAL_IRDA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup IRDA IRDA HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Types IRDA Exported Types
+ * @{
+ */
+
+/**
+ * @brief IRDA Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate.
+ The baud rate register is computed using the following formula:
+ Baud Rate Register = ((PCLKx) / ((hirda->Init.BaudRate))) */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref IRDAEx_Word_Length */
+
+ uint16_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref IRDA_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint16_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref IRDA_Mode */
+
+ uint8_t Prescaler; /*!< Specifies the Prescaler value for dividing the UART/USART source clock
+ to achieve low-power frequency.
+ @note Prescaler value 0 is forbidden */
+
+ uint16_t PowerMode; /*!< Specifies the IRDA power mode.
+ This parameter can be a value of @ref IRDA_Low_Power */
+}IRDA_InitTypeDef;
+
+/**
+ * @brief HAL IRDA State structures definition
+ */
+typedef enum
+{
+ HAL_IRDA_STATE_RESET = 0x00, /*!< Peripheral is not initialized */
+ HAL_IRDA_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_IRDA_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_IRDA_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_IRDA_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_IRDA_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_IRDA_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_IRDA_STATE_ERROR = 0x04 /*!< Error */
+}HAL_IRDA_StateTypeDef;
+
+/**
+ * @brief HAL IRDA Error Code structure definition
+ */
+typedef enum
+{
+ HAL_IRDA_ERROR_NONE = 0x00, /*!< No error */
+ HAL_IRDA_ERROR_PE = 0x01, /*!< Parity error */
+ HAL_IRDA_ERROR_NE = 0x02, /*!< Noise error */
+ HAL_IRDA_ERROR_FE = 0x04, /*!< frame error */
+ HAL_IRDA_ERROR_ORE = 0x08, /*!< Overrun error */
+ HAL_IRDA_ERROR_DMA = 0x10 /*!< DMA transfer error */
+}HAL_IRDA_ErrorTypeDef;
+
+/**
+ * @brief IRDA clock sources definition
+ */
+typedef enum
+{
+ IRDA_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */
+ IRDA_CLOCKSOURCE_PCLK2 = 0x01, /*!< PCLK2 clock source */
+ IRDA_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */
+ IRDA_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */
+ IRDA_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */
+ IRDA_CLOCKSOURCE_UNDEFINED = 0x10 /*!< Undefined clock source */
+}IRDA_ClockSourceTypeDef;
+
+/**
+ * @brief IRDA handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /* USART registers base address */
+
+ IRDA_InitTypeDef Init; /* IRDA communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to IRDA Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* IRDA Tx Transfer size */
+
+ uint16_t TxXferCount; /* IRDA Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to IRDA Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* IRDA Rx Transfer size */
+
+ uint16_t RxXferCount; /* IRDA Rx Transfer Counter */
+
+ uint16_t Mask; /* USART RX RDR register mask */
+
+ DMA_HandleTypeDef *hdmatx; /* IRDA Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* IRDA Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ HAL_IRDA_StateTypeDef State; /* IRDA communication state */
+
+ HAL_IRDA_ErrorTypeDef ErrorCode; /* IRDA Error code */
+
+}IRDA_HandleTypeDef;
+
+/**
+ * @brief IRDA Configuration enumeration values definition
+ */
+typedef enum
+{
+ IRDA_BAUDRATE = 0x00,
+ IRDA_PARITY = 0x01,
+ IRDA_WORDLENGTH = 0x02,
+ IRDA_MODE = 0x03,
+ IRDA_PRESCALER = 0x04,
+ IRDA_POWERMODE = 0x05
+}IRDA_ControlTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Constants IRDA Exported Constants
+ * @{
+ */
+
+/** @defgroup IRDA_Parity IRDA Parity
+ * @{
+ */
+#define IRDA_PARITY_NONE ((uint16_t)0x0000)
+#define IRDA_PARITY_EVEN ((uint16_t)USART_CR1_PCE)
+#define IRDA_PARITY_ODD ((uint16_t)(USART_CR1_PCE | USART_CR1_PS))
+#define IS_IRDA_PARITY(PARITY) (((PARITY) == IRDA_PARITY_NONE) || \
+ ((PARITY) == IRDA_PARITY_EVEN) || \
+ ((PARITY) == IRDA_PARITY_ODD))
+/**
+ * @}
+ */
+
+
+/** @defgroup IRDA_Transfer_Mode IRDA Transfer Mode
+ * @{
+ */
+#define IRDA_MODE_RX ((uint16_t)USART_CR1_RE)
+#define IRDA_MODE_TX ((uint16_t)USART_CR1_TE)
+#define IRDA_MODE_TX_RX ((uint16_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_IRDA_TX_RX_MODE(MODE) ((((MODE) & (~((uint16_t)(IRDA_MODE_TX_RX)))) == (uint16_t)0x00) && ((MODE) != (uint16_t)0x00))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Low_Power IRDA Low Power
+ * @{
+ */
+#define IRDA_POWERMODE_NORMAL ((uint16_t)0x0000)
+#define IRDA_POWERMODE_LOWPOWER ((uint16_t)USART_CR3_IRLP)
+#define IS_IRDA_POWERMODE(MODE) (((MODE) == IRDA_POWERMODE_LOWPOWER) || \
+ ((MODE) == IRDA_POWERMODE_NORMAL))
+/**
+ * @}
+ */
+
+ /** @defgroup IRDA_State IRDA State
+ * @{
+ */
+#define IRDA_STATE_DISABLE ((uint16_t)0x0000)
+#define IRDA_STATE_ENABLE ((uint16_t)USART_CR1_UE)
+#define IS_IRDA_STATE(STATE) (((STATE) == IRDA_STATE_DISABLE) || \
+ ((STATE) == IRDA_STATE_ENABLE))
+/**
+ * @}
+ */
+
+ /** @defgroup IRDA_Mode IRDA Mode
+ * @{
+ */
+#define IRDA_MODE_DISABLE ((uint16_t)0x0000)
+#define IRDA_MODE_ENABLE ((uint16_t)USART_CR3_IREN)
+#define IS_IRDA_MODE(STATE) (((STATE) == IRDA_MODE_DISABLE) || \
+ ((STATE) == IRDA_MODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_One_Bit IRDA One Bit Sampling
+ * @{
+ */
+#define IRDA_ONE_BIT_SAMPLE_DISABLED ((uint16_t)0x00000000)
+#define IRDA_ONE_BIT_SAMPLE_ENABLED ((uint16_t)USART_CR3_ONEBIT)
+#define IS_IRDA_ONEBIT_SAMPLE(ONEBIT) (((ONEBIT) == IRDA_ONE_BIT_SAMPLE_DISABLED) || \
+ ((ONEBIT) == IRDA_ONE_BIT_SAMPLE_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_DMA_Tx IRDA DMA Tx
+ * @{
+ */
+#define IRDA_DMA_TX_DISABLE ((uint16_t)0x00000000)
+#define IRDA_DMA_TX_ENABLE ((uint16_t)USART_CR3_DMAT)
+#define IS_IRDA_DMA_TX(DMATX) (((DMATX) == IRDA_DMA_TX_DISABLE) || \
+ ((DMATX) == IRDA_DMA_TX_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_DMA_Rx IRDA DMA Rx
+ * @{
+ */
+#define IRDA_DMA_RX_DISABLE ((uint16_t)0x0000)
+#define IRDA_DMA_RX_ENABLE ((uint16_t)USART_CR3_DMAR)
+#define IS_IRDA_DMA_RX(DMARX) (((DMARX) == IRDA_DMA_RX_DISABLE) || \
+ ((DMARX) == IRDA_DMA_RX_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Flags IRDA Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the ISR register
+ * @{
+ */
+#define IRDA_FLAG_REACK ((uint32_t)0x00400000)
+#define IRDA_FLAG_TEACK ((uint32_t)0x00200000)
+#define IRDA_FLAG_BUSY ((uint32_t)0x00010000)
+#define IRDA_FLAG_ABRF ((uint32_t)0x00008000)
+#define IRDA_FLAG_ABRE ((uint32_t)0x00004000)
+#define IRDA_FLAG_TXE ((uint32_t)0x00000080)
+#define IRDA_FLAG_TC ((uint32_t)0x00000040)
+#define IRDA_FLAG_RXNE ((uint32_t)0x00000020)
+#define IRDA_FLAG_ORE ((uint32_t)0x00000008)
+#define IRDA_FLAG_NE ((uint32_t)0x00000004)
+#define IRDA_FLAG_FE ((uint32_t)0x00000002)
+#define IRDA_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Interrupt_definition IRDA Interrupts Definition
+ * Elements values convention: 0000ZZZZ0XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ * @{
+ */
+#define IRDA_IT_PE ((uint16_t)0x0028)
+#define IRDA_IT_TXE ((uint16_t)0x0727)
+#define IRDA_IT_TC ((uint16_t)0x0626)
+#define IRDA_IT_RXNE ((uint16_t)0x0525)
+#define IRDA_IT_IDLE ((uint16_t)0x0424)
+
+
+
+/** Elements values convention: 000000000XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ */
+#define IRDA_IT_ERR ((uint16_t)0x0060)
+
+/** Elements values convention: 0000ZZZZ00000000b
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ */
+#define IRDA_IT_ORE ((uint16_t)0x0300)
+#define IRDA_IT_NE ((uint16_t)0x0200)
+#define IRDA_IT_FE ((uint16_t)0x0100)
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_IT_CLEAR_Flags IRDA Interruption Clear Flags
+ * @{
+ */
+#define IRDA_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
+#define IRDA_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
+#define IRDA_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
+#define IRDA_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
+#define IRDA_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
+/**
+ * @}
+ */
+
+
+
+/** @defgroup IRDA_Request_Parameters IRDA Request Parameters
+ * @{
+ */
+#define IRDA_AUTOBAUD_REQUEST ((uint16_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */
+#define IRDA_RXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
+#define IRDA_TXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
+#define IS_IRDA_REQUEST_PARAMETER(PARAM) (((PARAM) == IRDA_AUTOBAUD_REQUEST) || \
+ ((PARAM) == IRDA_SENDBREAK_REQUEST) || \
+ ((PARAM) == IRDA_MUTE_MODE_REQUEST) || \
+ ((PARAM) == IRDA_RXDATA_FLUSH_REQUEST) || \
+ ((PARAM) == IRDA_TXDATA_FLUSH_REQUEST))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Interruption_Mask IRDA interruptions flag mask
+ * @{
+ */
+#define IRDA_IT_MASK ((uint16_t)0x001F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Macros IRDA Exported Macros
+ * @{
+ */
+
+/** @brief Reset IRDA handle state
+ * @param __HANDLE__: IRDA handle.
+ * @retval None
+ */
+#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IRDA_STATE_RESET)
+
+/** @brief Checks whether the specified IRDA flag is set or not.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_FLAG_REACK: Receive enable ackowledge flag
+ * @arg IRDA_FLAG_TEACK: Transmit enable ackowledge flag
+ * @arg IRDA_FLAG_BUSY: Busy flag
+ * @arg IRDA_FLAG_ABRF: Auto Baud rate detection flag
+ * @arg IRDA_FLAG_ABRE: Auto Baud rate detection error flag
+ * @arg IRDA_FLAG_TXE: Transmit data register empty flag
+ * @arg IRDA_FLAG_TC: Transmission Complete flag
+ * @arg IRDA_FLAG_RXNE: Receive data register not empty flag
+ * @arg IRDA_FLAG_IDLE: Idle Line detection flag
+ * @arg IRDA_FLAG_ORE: OverRun Error flag
+ * @arg IRDA_FLAG_NE: Noise Error flag
+ * @arg IRDA_FLAG_FE: Framing Error flag
+ * @arg IRDA_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Enables the specified IRDA interrupt.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __INTERRUPT__: specifies the IRDA interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & IRDA_IT_MASK))))
+
+/** @brief Disables the specified IRDA interrupt.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __INTERRUPT__: specifies the IRDA interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & IRDA_IT_MASK))))
+
+
+/** @brief Checks whether the specified IRDA interrupt has occurred or not.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __IT__: specifies the IRDA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg IRDA_IT_ORE: OverRun Error interrupt
+ * @arg IRDA_IT_NE: Noise Error interrupt
+ * @arg IRDA_IT_FE: Framing Error interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_IRDA_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1U << ((__IT__)>> 0x08)))
+
+/** @brief Checks whether the specified IRDA interrupt source is enabled.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __IT__: specifies the IRDA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg IRDA_IT_ORE: OverRun Error interrupt
+ * @arg IRDA_IT_NE: Noise Error interrupt
+ * @arg IRDA_IT_FE: Framing Error interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5U) == 2)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & IRDA_IT_MASK)))
+
+
+/** @brief Clears the specified IRDA ISR flag, in setting the proper ICR register flag.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+ * to clear the corresponding interrupt
+ * This parameter can be one of the following values:
+ * @arg IRDA_CLEAR_PEF: Parity Error Clear Flag
+ * @arg IRDA_CLEAR_FEF: Framing Error Clear Flag
+ * @arg IRDA_CLEAR_NEF: Noise detected Clear Flag
+ * @arg IRDA_CLEAR_OREF: OverRun Error Clear Flag
+ * @arg IRDA_CLEAR_TCF: Transmission Complete Clear Flag
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
+
+
+/** @brief Set a specific IRDA request flag.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __REQ__: specifies the request flag to set
+ * This parameter can be one of the following values:
+ * @arg IRDA_AUTOBAUD_REQUEST: Auto-Baud Rate Request
+ * @arg IRDA_RXDATA_FLUSH_REQUEST: Receive Data flush Request
+ * @arg IRDA_TXDATA_FLUSH_REQUEST: Transmit data flush Request
+ *
+ * @retval None
+ */
+#define __HAL_IRDA_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
+
+
+
+/** @brief Enable UART/USART associated to IRDA Handle
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @retval None
+ */
+#define __HAL_IRDA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable UART/USART associated to IRDA Handle
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @retval None
+ */
+#define __HAL_IRDA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/** @brief Ensure that IRDA Baud rate is less or equal to maximum value
+ * @param __BAUDRATE__: specifies the IRDA Baudrate set by the user.
+ * @retval True or False
+ */
+#define IS_IRDA_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 115201)
+
+/** @brief Ensure that IRDA prescaler value is strictly larger than 0
+ * @param __PRESCALER__: specifies the IRDA prescaler value set by the user.
+ * @retval True or False
+ */
+#define IS_IRDA_PRESCALER(__PRESCALER__) ((__PRESCALER__) > 0)
+
+/**
+ * @}
+ */
+
+/* Include IRDA HAL Extended module */
+#include "stm32f3xx_hal_irda_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup IRDA_Exported_Functions IRDA Exported Functions
+ * @{
+ */
+
+/** @addtogroup IRDA_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda);
+
+/**
+ * @}
+ */
+
+/** @addtogroup IRDA_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda);
+
+/**
+ * @}
+ */
+
+/** @addtogroup IRDA_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @{
+ */
+
+/* Peripheral State and Error functions ***************************************/
+HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda);
+uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_IRDA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_irda_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,415 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_irda_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of IRDA HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_IRDA_EX_H
+#define __STM32F3xx_HAL_IRDA_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup IRDAEx IRDA Extended HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IRDAEx_Exported_Constants IRDA Extended Exported Constants
+ * @{
+ */
+
+/** @defgroup IRDAEx_Word_Length IRDA Extended Word Length
+ * @{
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F334x8) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define IRDA_WORDLENGTH_7B ((uint32_t)USART_CR1_M1)
+#define IRDA_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define IRDA_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
+#define IS_IRDA_WORD_LENGTH(LENGTH) (((LENGTH) == IRDA_WORDLENGTH_7B) || \
+ ((LENGTH) == IRDA_WORDLENGTH_8B) || \
+ ((LENGTH) == IRDA_WORDLENGTH_9B))
+#else
+#define IRDA_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define IRDA_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+#define IS_IRDA_WORD_LENGTH(LENGTH) (((LENGTH) == IRDA_WORDLENGTH_8B) || \
+ ((LENGTH) == IRDA_WORDLENGTH_9B))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F334x8 || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup IRDAEx_Exported_Macros IRDA Extended Exported Macros
+ * @{
+ */
+
+/** @brief Reports the IRDA clock source.
+ * @param __HANDLE__: specifies the IRDA Handle
+ * @param __CLOCKSOURCE__ : output variable
+ * @retval IRDA clocking source, written in __CLOCKSOURCE__.
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK2: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK2; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == UART4) \
+ { \
+ switch(__HAL_RCC_GET_UART4_SOURCE()) \
+ { \
+ case RCC_UART4CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_UART4CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_UART4CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_UART4CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if ((__HANDLE__)->Instance == UART5) \
+ { \
+ switch(__HAL_RCC_GET_UART5_SOURCE()) \
+ { \
+ case RCC_UART5CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_UART5CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_UART5CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_UART5CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ } while(0)
+#elif defined(STM32F303x8) || defined(STM32F334x8) ||defined(STM32F328xx)
+#define __HAL_IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ } while(0)
+#else
+#define __HAL_IRDA_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK2: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK2; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = IRDA_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ } while(0)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+
+
+/** @brief Computes the mask to apply to retrieve the received data
+ * according to the word length and to the parity bits activation.
+ * @param __HANDLE__: specifies the IRDA Handle
+ * @retval none
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F334x8)
+#define __HAL_IRDA_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_7B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x003F ; \
+ } \
+ } \
+} while(0)
+#else
+#define __HAL_IRDA_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == IRDA_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == IRDA_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ } \
+} while(0)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F334x8 */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions ****************************/
+/* IO operation functions *****************************************************/
+/* Peripheral Control functions ***********************************************/
+/* Peripheral State and Error functions ***************************************/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_IRDA_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_iwdg.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,313 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_iwdg.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of IWDG HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_IWDG_H
+#define __STM32F3xx_HAL_IWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup IWDG IWDG HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup IWDG_Exported_Types IWDG Exported Types
+ * @{
+ */
+
+/**
+ * @brief IWDG HAL State Structure definition
+ */
+typedef enum
+{
+ HAL_IWDG_STATE_RESET = 0x00, /*!< IWDG not yet initialized or disabled */
+ HAL_IWDG_STATE_READY = 0x01, /*!< IWDG initialized and ready for use */
+ HAL_IWDG_STATE_BUSY = 0x02, /*!< IWDG internal process is ongoing */
+ HAL_IWDG_STATE_TIMEOUT = 0x03, /*!< IWDG timeout state */
+ HAL_IWDG_STATE_ERROR = 0x04 /*!< IWDG error state */
+
+}HAL_IWDG_StateTypeDef;
+
+/**
+ * @brief IWDG Init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Select the prescaler of the IWDG.
+ This parameter can be a value of @ref IWDG_Prescaler */
+
+ uint32_t Reload; /*!< Specifies the IWDG down-counter reload value.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
+
+ uint32_t Window; /*!< Specifies the window value to be compared to the down-counter.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */
+
+} IWDG_InitTypeDef;
+
+/**
+ * @brief IWDG Handle Structure definition
+ */
+typedef struct
+{
+ IWDG_TypeDef *Instance; /*!< Register base address */
+
+ IWDG_InitTypeDef Init; /*!< IWDG required parameters */
+
+ HAL_LockTypeDef Lock; /*!< IWDG Locking object */
+
+ __IO HAL_IWDG_StateTypeDef State; /*!< IWDG communication state */
+
+}IWDG_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup IWDG_Exported_Constants IWDG Exported Constants
+ * @{
+ */
+
+/** @defgroup IWDG_Registers_BitMask IWDG Registers BitMask
+ * @brief IWDG registers bit mask
+ * @{
+ */
+/* --- KR Register ---*/
+/* KR register bit mask */
+#define KR_KEY_RELOAD ((uint32_t)0xAAAA) /*!< IWDG Reload Counter Enable */
+#define KR_KEY_ENABLE ((uint32_t)0xCCCC) /*!< IWDG Peripheral Enable */
+#define KR_KEY_EWA ((uint32_t)0x5555) /*!< IWDG KR Write Access Enable */
+#define KR_KEY_DWA ((uint32_t)0x0000) /*!< IWDG KR Write Access Disable */
+
+#define IS_IWDG_KR(__KR__) (((__KR__) == KR_KEY_RELOAD) || \
+ ((__KR__) == KR_KEY_ENABLE))|| \
+ ((__KR__) == KR_KEY_EWA)) || \
+ ((__KR__) == KR_KEY_DWA))
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Flag_definition IWDG Flag definition
+ * @{
+ */
+#define IWDG_FLAG_PVU ((uint32_t)0x0001) /*!< Watchdog counter prescaler value update Flag */
+#define IWDG_FLAG_RVU ((uint32_t)0x0002) /*!< Watchdog counter reload value update Flag */
+#define IWDG_FLAG_WVU ((uint32_t)0x0004) /*!< Watchdog counter window value update Flag */
+
+#define IS_IWDG_FLAG(FLAG) (((FLAG) == IWDG_FLAG_PVU) || \
+ ((FLAG) == IWDG_FLAG_RVU) || \
+ ((FLAG) == IWDG_FLAG_WVU))
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Prescaler IWDG Prescaler
+ * @{
+ */
+#define IWDG_PRESCALER_4 ((uint8_t)0x00) /*!< IWDG prescaler set to 4 */
+#define IWDG_PRESCALER_8 ((uint8_t)IWDG_PR_PR_0) /*!< IWDG prescaler set to 8 */
+#define IWDG_PRESCALER_16 ((uint8_t)IWDG_PR_PR_1) /*!< IWDG prescaler set to 16 */
+#define IWDG_PRESCALER_32 ((uint8_t)IWDG_PR_PR_1 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 32 */
+#define IWDG_PRESCALER_64 ((uint8_t)IWDG_PR_PR_2) /*!< IWDG prescaler set to 64 */
+#define IWDG_PRESCALER_128 ((uint8_t)IWDG_PR_PR_2 | IWDG_PR_PR_0) /*!< IWDG prescaler set to 128 */
+#define IWDG_PRESCALER_256 ((uint8_t)IWDG_PR_PR_2 | IWDG_PR_PR_1) /*!< IWDG prescaler set to 256 */
+
+#define IS_IWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == IWDG_PRESCALER_4) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_8) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_16) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_32) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_64) || \
+ ((__PRESCALER__) == IWDG_PRESCALER_128)|| \
+ ((__PRESCALER__) == IWDG_PRESCALER_256))
+
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_Reload_Value IWDG Reload Value
+ * @{
+ */
+#define IS_IWDG_RELOAD(__RELOAD__) ((__RELOAD__) <= 0xFFF)
+/**
+ * @}
+ */
+
+/** @defgroup IWDG_CounterWindow_Value IWDG CounterWindow Value
+ * @{
+ */
+#define IS_IWDG_WINDOW(__VALUE__) ((__VALUE__) <= 0xFFF)
+/**
+ * @}
+ */
+/** @defgroup IWDG_Window_option IWDG Window option
+ * @{
+ */
+#define IWDG_WINDOW_DISABLE 0xFFF
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup IWDG_Exported_Macros IWDG Exported Macros
+ * @{
+ */
+
+/** @brief Reset IWDG handle state
+ * @param __HANDLE__: IWDG handle.
+ * @retval None
+ */
+#define __HAL_IWDG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IWDG_STATE_RESET)
+
+/**
+ * @brief Enables the IWDG peripheral.
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_START(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, KR_KEY_ENABLE)
+
+/**
+ * @brief Reloads IWDG counter with value defined in the reload register
+ * (write access to IWDG_PR and IWDG_RLR registers disabled).
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_RELOAD_COUNTER(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, KR_KEY_RELOAD)
+
+/**
+ * @brief Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers.
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_ENABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, KR_KEY_EWA)
+
+/**
+ * @brief Disable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers.
+ * @param __HANDLE__: IWDG handle
+ * @retval None
+ */
+#define __HAL_IWDG_DISABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, KR_KEY_DWA)
+
+/**
+ * @brief Gets the selected IWDG's flag status.
+ * @param __HANDLE__: IWDG handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg IWDG_FLAG_PVU: Watchdog counter reload value update flag
+ * @arg IWDG_FLAG_RVU: Watchdog counter prescaler value flag
+ * @arg IWDG_FLAG_WVU: Watchdog counter window value flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_IWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup IWDG_Exported_Functions IWDG Exported Functions
+ * @{
+ */
+
+/** @addtogroup IWDG_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg);
+void HAL_IWDG_MspInit(IWDG_HandleTypeDef *hiwdg);
+
+/**
+ * @}
+ */
+
+/** @addtogroup IWDG_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+/* I/O operation functions ****************************************************/
+HAL_StatusTypeDef HAL_IWDG_Start(IWDG_HandleTypeDef *hiwdg);
+HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg);
+
+/**
+ * @}
+ */
+
+/** @addtogroup IWDG_Exported_Functions_Group3 Peripheral State functions
+ * @{
+ */
+/* Peripheral State functions ************************************************/
+HAL_IWDG_StateTypeDef HAL_IWDG_GetState(IWDG_HandleTypeDef *hiwdg);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_IWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_nand.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,286 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_nand.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of NAND HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_NAND_H
+#define __STM32F3xx_HAL_NAND_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+ #include "stm32f3xx_ll_fmc.h"
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup NAND
+ * @{
+ */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+
+/* Exported typedef ----------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup NAND_Exported_Types NAND Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL NAND State structures definition
+ */
+typedef enum
+{
+ HAL_NAND_STATE_RESET = 0x00, /*!< NAND not yet initialized or disabled */
+ HAL_NAND_STATE_READY = 0x01, /*!< NAND initialized and ready for use */
+ HAL_NAND_STATE_BUSY = 0x02, /*!< NAND internal process is ongoing */
+ HAL_NAND_STATE_ERROR = 0x03 /*!< NAND error state */
+}HAL_NAND_StateTypeDef;
+
+/**
+ * @brief NAND Memory electronic signature Structure definition
+ */
+typedef struct
+{
+ /*<! NAND memory electronic signature maker and device IDs */
+
+ uint8_t Maker_Id;
+
+ uint8_t Device_Id;
+
+ uint8_t Third_Id;
+
+ uint8_t Fourth_Id;
+}NAND_IDTypeDef;
+
+/**
+ * @brief NAND Memory address Structure definition
+ */
+typedef struct
+{
+ uint16_t Page; /*!< NAND memory Page address */
+
+ uint16_t Zone; /*!< NAND memory Zone address */
+
+ uint16_t Block; /*!< NAND memory Block address */
+
+}NAND_AddressTypedef;
+
+/**
+ * @brief NAND Memory info Structure definition
+ */
+typedef struct
+{
+ uint32_t PageSize; /*!< NAND memory page (without spare area) size measured in K. bytes */
+
+ uint32_t SpareAreaSize; /*!< NAND memory spare area size measured in K. bytes */
+
+ uint32_t BlockSize; /*!< NAND memory block size number of pages */
+
+ uint32_t BlockNbr; /*!< NAND memory number of blocks */
+
+ uint32_t ZoneSize; /*!< NAND memory zone size measured in number of blocks */
+}NAND_InfoTypeDef;
+
+/**
+ * @brief NAND handle Structure definition
+ */
+typedef struct
+{
+ FMC_NAND_TypeDef *Instance; /*!< Register base address */
+
+ FMC_NAND_InitTypeDef Init; /*!< NAND device control configuration parameters */
+
+ HAL_LockTypeDef Lock; /*!< NAND locking object */
+
+ __IO HAL_NAND_StateTypeDef State; /*!< NAND device access state */
+
+ NAND_InfoTypeDef Info; /*!< NAND characteristic information structure */
+}NAND_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup NAND_Exported_Constants NAND Exported Constants
+ * @{
+ */
+#define NAND_DEVICE1 ((uint32_t)0x70000000)
+#define NAND_DEVICE2 ((uint32_t)0x80000000)
+#define NAND_WRITE_TIMEOUT ((uint32_t)0x01000000)
+
+#define CMD_AREA ((uint32_t)(1<<16)) /* A16 = CLE high */
+#define ADDR_AREA ((uint32_t)(1<<17)) /* A17 = ALE high */
+
+#define NAND_CMD_AREA_A ((uint8_t)0x00)
+#define NAND_CMD_AREA_B ((uint8_t)0x01)
+#define NAND_CMD_AREA_C ((uint8_t)0x50)
+
+/* NAND memory status */
+#define NAND_VALID_ADDRESS ((uint32_t)0x00000100)
+#define NAND_INVALID_ADDRESS ((uint32_t)0x00000200)
+#define NAND_TIMEOUT_ERROR ((uint32_t)0x00000400)
+#define NAND_BUSY ((uint32_t)0x00000000)
+#define NAND_ERROR ((uint32_t)0x00000001)
+#define NAND_READY ((uint32_t)0x00000040)
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup NAND_Exported_Macros NAND Exported Macros
+ * @{
+ */
+
+/** @brief Reset NAND handle state
+ * @param __HANDLE__: specifies the NAND handle.
+ * @retval None
+ */
+#define __HAL_NAND_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NAND_STATE_RESET)
+
+/**
+ * @brief NAND memory address computation.
+ * @param __ADDRESS__: NAND memory address.
+ * @param __HANDLE__ : NAND handle.
+ * @retval NAND Raw address value
+ */
+#define ARRAY_ADDRESS(__ADDRESS__ , __HANDLE__) ((__ADDRESS__)->Page + (((__ADDRESS__)->Block + (((__ADDRESS__)->Zone) * ((__HANDLE__)->Info.ZoneSize)))* ((__HANDLE__)->Info.BlockSize)))
+
+/**
+ * @brief NAND memory address cycling.
+ * @param __ADDRESS__: NAND memory address.
+ * @retval NAND address cycling value.
+ */
+#define ADDR_1st_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__)& 0xFF) /* 1st addressing cycle */
+#define ADDR_2nd_CYCLE(__ADDRESS__) (uint8_t)(((__ADDRESS__)& 0xFF00) >> 8) /* 2nd addressing cycle */
+#define ADDR_3rd_CYCLE(__ADDRESS__) (uint8_t)(((__ADDRESS__)& 0xFF0000) >> 16) /* 3rd addressing cycle */
+#define ADDR_4th_CYCLE(__ADDRESS__) (uint8_t)(((__ADDRESS__)& 0xFF000000) >> 24) /* 4th addressing cycle */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup NAND_Exported_Functions NAND Exported Functions
+ * @{
+ */
+
+/** @addtogroup NAND_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing);
+HAL_StatusTypeDef HAL_NAND_DeInit(NAND_HandleTypeDef *hnand);
+void HAL_NAND_MspInit(NAND_HandleTypeDef *hnand);
+void HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand);
+void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand);
+void HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand);
+
+/**
+ * @}
+ */
+
+/** @addtogroup NAND_Exported_Functions_Group2 Input and Output functions
+ * @{
+ */
+
+/* IO operation functions ****************************************************/
+HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID);
+HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand);
+HAL_StatusTypeDef HAL_NAND_Read_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypedef *pAddress, uint8_t *pBuffer, uint32_t NumPageToRead);
+HAL_StatusTypeDef HAL_NAND_Write_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypedef *pAddress, uint8_t *pBuffer, uint32_t NumPageToWrite);
+HAL_StatusTypeDef HAL_NAND_Read_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypedef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaToRead);
+HAL_StatusTypeDef HAL_NAND_Write_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypedef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaTowrite);
+HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypedef *pAddress);
+uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand);
+uint32_t HAL_NAND_Address_Inc(NAND_HandleTypeDef *hnand, NAND_AddressTypedef *pAddress);
+
+/**
+ * @}
+ */
+
+/** @addtogroup NAND_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+
+/* NAND Control functions ****************************************************/
+HAL_StatusTypeDef HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand);
+HAL_StatusTypeDef HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand);
+HAL_StatusTypeDef HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout);
+
+/**
+ * @}
+ */
+
+/** @defgroup NAND_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+
+/* NAND State functions *******************************************************/
+HAL_NAND_StateTypeDef HAL_NAND_GetState(NAND_HandleTypeDef *hnand);
+uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_NAND_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_nor.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,300 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_nor.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of NOR HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_NOR_H
+#define __STM32F3xx_HAL_NOR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+ #include "stm32f3xx_ll_fmc.h"
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup NOR
+ * @{
+ */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+
+/* Exported typedef ----------------------------------------------------------*/
+/** @defgroup NOR_Exported_Types NOR Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL SRAM State structures definition
+ */
+typedef enum
+{
+ HAL_NOR_STATE_RESET = 0x00, /*!< NOR not yet initialized or disabled */
+ HAL_NOR_STATE_READY = 0x01, /*!< NOR initialized and ready for use */
+ HAL_NOR_STATE_BUSY = 0x02, /*!< NOR internal processing is ongoing */
+ HAL_NOR_STATE_ERROR = 0x03, /*!< NOR error state */
+ HAL_NOR_STATE_PROTECTED = 0x04 /*!< NOR NORSRAM device write protected */
+
+}HAL_NOR_StateTypeDef;
+
+/**
+ * @brief FMC NOR Status typedef
+ */
+typedef enum
+{
+ NOR_SUCCESS = 0,
+ NOR_ONGOING,
+ NOR_ERROR,
+ NOR_TIMEOUT
+
+}NOR_StatusTypedef;
+
+/**
+ * @brief FMC NOR ID typedef
+ */
+typedef struct
+{
+ uint16_t Manufacturer_Code; /*!< Defines the device's manufacturer code used to identify the memory */
+
+ uint16_t Device_Code1;
+
+ uint16_t Device_Code2;
+
+ uint16_t Device_Code3; /*!< Defines the device's codes used to identify the memory.
+ These codes can be accessed by performing read operations with specific
+ control signals and addresses set.They can also be accessed by issuing
+ an Auto Select command */
+}NOR_IDTypeDef;
+
+/**
+ * @brief FMC NOR CFI typedef
+ */
+typedef struct
+{
+ /*!< Defines the information stored in the memory's Common flash interface
+ which contains a description of various electrical and timing parameters,
+ density information and functions supported by the memory */
+
+ uint16_t CFI_1;
+
+ uint16_t CFI_2;
+
+ uint16_t CFI_3;
+
+ uint16_t CFI_4;
+
+}NOR_CFITypeDef;
+
+/**
+ * @brief NOR handle Structure definition
+ */
+typedef struct
+{
+ FMC_NORSRAM_TypeDef *Instance; /*!< Register base address */
+
+ FMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */
+
+ FMC_NORSRAM_InitTypeDef Init; /*!< NOR device control configuration parameters */
+
+ HAL_LockTypeDef Lock; /*!< NOR locking object */
+
+ __IO HAL_NOR_StateTypeDef State; /*!< NOR device access state */
+
+}NOR_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup NOR_Exported_Constants NOR Exported Constants
+ * @{
+ */
+/* NOR device IDs addresses */
+#define MC_ADDRESS ((uint16_t)0x0000)
+#define DEVICE_CODE1_ADDR ((uint16_t)0x0001)
+#define DEVICE_CODE2_ADDR ((uint16_t)0x000E)
+#define DEVICE_CODE3_ADDR ((uint16_t)0x000F)
+
+/* NOR CFI IDs addresses */
+#define CFI1_ADDRESS ((uint16_t)0x61)
+#define CFI2_ADDRESS ((uint16_t)0x62)
+#define CFI3_ADDRESS ((uint16_t)0x63)
+#define CFI4_ADDRESS ((uint16_t)0x64)
+
+/* NOR operation wait timeout */
+#define NOR_TMEOUT ((uint16_t)0xFFFF)
+
+/* NOR memory data width */
+#define NOR_MEMORY_8B ((uint8_t)0x0)
+#define NOR_MEMORY_16B ((uint8_t)0x1)
+
+/* NOR memory device read/write start address */
+#define NOR_MEMORY_ADRESS1 ((uint32_t)0x60000000)
+#define NOR_MEMORY_ADRESS2 ((uint32_t)0x64000000)
+#define NOR_MEMORY_ADRESS3 ((uint32_t)0x68000000)
+#define NOR_MEMORY_ADRESS4 ((uint32_t)0x6C000000)
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup NOR_Exported_Macros NOR Exported Macros
+ * @{
+ */
+
+/** @brief Reset NOR handle state
+ * @param __HANDLE__: specifies the NOR handle.
+ * @retval None
+ */
+#define __HAL_NOR_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NOR_STATE_RESET)
+
+/**
+ * @brief NOR memory address shifting.
+ * @param __NOR_ADDRESS: NOR base address
+ * @param __NOR_MEMORY_WIDTH_: NOR memory width
+ * @param __ADDRESS__: NOR memory address
+ * @retval NOR shifted address value
+ */
+#define __NOR_ADDR_SHIFT(__NOR_ADDRESS, __NOR_MEMORY_WIDTH_, __ADDRESS__) \
+ ((uint32_t)(((__NOR_MEMORY_WIDTH_) == NOR_MEMORY_16B)? \
+ ((uint32_t)((__NOR_ADDRESS) + (2 * (__ADDRESS__)))): \
+ ((uint32_t)((__NOR_ADDRESS) + (__ADDRESS__)))))
+
+/**
+ * @brief NOR memory write data to specified address.
+ * @param __ADDRESS__: NOR memory address
+ * @param __DATA__: Data to write
+ * @retval None
+ */
+#define __NOR_WRITE(__ADDRESS__, __DATA__) (*(__IO uint16_t *)((uint32_t)(__ADDRESS__)) = (__DATA__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup NOR_Exported_Functions NOR Exported Functions
+ * @{
+ */
+
+/** @addtogroup NOR_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming);
+HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor);
+void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout);
+
+/**
+ * @}
+ */
+
+/** @addtogroup NOR_Exported_Functions_Group2 Input and Output functions
+ * @{
+ */
+
+/* I/O operation functions *****************************************************/
+HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID);
+HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor);
+HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData);
+HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData);
+
+HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize);
+HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize);
+
+HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address);
+HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address);
+HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI);
+
+/**
+ * @}
+ */
+
+/** @addtogroup NOR_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+
+/* NOR Control functions *******************************************************/
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor);
+HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor);
+
+/**
+ * @}
+ */
+
+/** @addtogroup NOR_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+
+/* NOR State functions **********************************************************/
+HAL_NOR_StateTypeDef HAL_NOR_GetState(NOR_HandleTypeDef *hnor);
+NOR_StatusTypedef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_NOR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_opamp.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,509 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_opamp.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of OPAMP HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_OPAMP_H
+#define __STM32F3xx_HAL_OPAMP_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup OPAMP
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup OPAMP_Exported_Types OPAMP Exported Types
+ * @{
+ */
+
+/**
+ * @brief OPAMP Init structure definition
+ */
+
+typedef struct
+{
+ uint32_t Mode; /*!< Specifies the OPAMP mode
+ This parameter must be a value of @ref OPAMP_Mode
+ mode is either Standalone, - Follower or PGA */
+
+ uint32_t InvertingInput; /*!< Specifies the inverting input in Standalone & Pga modes
+ - In Standalone mode: i.e when mode is OPAMP_STANDALONE_MODE
+ This parameter must be a value of @ref OPAMP_InvertingInput
+ InvertingInput is either VM0 or VM1
+ - In PGA mode: i.e when mode is OPAMP_PGA_MODE
+ & in Follower mode i.e when mode is OPAMP_FOLLOWER_MODE
+ This parameter is Not Applicable */
+
+ uint32_t NonInvertingInput; /*!< Specifies the non inverting input of the opamp:
+ This parameter must be a value of @ref OPAMP_NonInvertingInput
+ NonInvertingInput is either VP0, VP1, VP2 or VP3 */
+
+ uint32_t TimerControlledMuxmode; /*!< Specifies if the Timer controlled Mux mode is enabled or disabled
+ This parameter must be a value of @ref OPAMP_TimerControlledMuxmode */
+
+ uint32_t InvertingInputSecondary; /*!< Specifies the inverting input (secondary) of the opamp when
+ TimerControlledMuxmode is enabled
+ i.e. when TimerControlledMuxmode is OPAMP_TIMERCONTROLLEDMUXMODE_ENABLE
+ - In Standalone mode: i.e when mode is OPAMP_STANDALONE_MODE
+ This parameter must be a value of @ref OPAMP_InvertingInputSecondary
+ InvertingInputSecondary is either VM0 or VM1
+ - In PGA mode: i.e when mode is OPAMP_PGA_MODE
+ & in Follower mode i.e when mode is OPAMP_FOLLOWER_MODE
+ This parameter is Not Applicable */
+
+ uint32_t NonInvertingInputSecondary; /*!< Specifies the non inverting input (secondary) of the opamp when
+ TimerControlledMuxmode is enabled
+ i.e. when TimerControlledMuxmode is OPAMP_TIMERCONTROLLEDMUXMODE_ENABLE
+ This parameter must be a value of @ref OPAMP_NonInvertingInputSecondary
+ NonInvertingInput is either VP0, VP1, VP2 or VP3 */
+
+ uint32_t PgaConnect; /*!< Specifies the inverting pin in PGA mode
+ i.e. when mode is OPAMP_PGA_MODE
+ This parameter must be a value of @ref OPAMP_PgaConnect
+ Either: not connected, connected to VM0, connected to VM1
+ (VM0 or VM1 are typically used for external filtering) */
+
+ uint32_t PgaGain; /*!< Specifies the gain in PGA mode
+ i.e. when mode is OPAMP_PGA_MODE.
+ This parameter must be a value of @ref OPAMP_PgaGain (2, 4, 8 or 16 ) */
+
+ uint32_t UserTrimming; /*!< Specifies the trimming mode
+ This parameter must be a value of @ref OPAMP_UserTrimming
+ UserTrimming is either factory or user trimming */
+
+ uint32_t TrimmingValueP; /*!< Specifies the offset trimming value (PMOS)
+ i.e. when UserTrimming is OPAMP_TRIMMING_USER.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 31 */
+
+ uint32_t TrimmingValueN; /*!< Specifies the offset trimming value (NMOS)
+ i.e. when UserTrimming is OPAMP_TRIMMING_USER.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 31 */
+
+}OPAMP_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+
+typedef enum
+{
+ HAL_OPAMP_STATE_RESET = 0x00000000, /*!< OPMAP is not yet Initialized */
+
+ HAL_OPAMP_STATE_READY = 0x00000001, /*!< OPAMP is initialized and ready for use */
+ HAL_OPAMP_STATE_CALIBBUSY = 0x00000002, /*!< OPAMP is enabled in auto calibration mode */
+
+ HAL_OPAMP_STATE_BUSY = 0x00000004, /*!< OPAMP is enabled and running in normal mode */
+ HAL_OPAMP_STATE_BUSYLOCKED = 0x00000005, /*!< OPAMP is locked
+ only system reset allows reconfiguring the opamp. */
+
+}HAL_OPAMP_StateTypeDef;
+
+/**
+ * @brief OPAMP Handle Structure definition to @brief OPAMP Handle Structure definition
+ */
+typedef struct
+{
+ OPAMP_TypeDef *Instance; /*!< OPAMP instance's registers base address */
+ OPAMP_InitTypeDef Init; /*!< OPAMP required parameters */
+ HAL_StatusTypeDef Status; /*!< OPAMP peripheral status */
+ HAL_LockTypeDef Lock; /*!< Locking object */
+ __IO HAL_OPAMP_StateTypeDef State; /*!< OPAMP communication state */
+
+} OPAMP_HandleTypeDef;
+
+/**
+ * @brief OPAMP_TrimmingValueTypeDef @brief definition
+ */
+
+typedef uint32_t OPAMP_TrimmingValueTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup OPAMP_Exported_Constants OPAMP Exported Constants
+ * @{
+ */
+
+/** @defgroup CSR_INIT CSR init register Mask
+ * @{
+ */
+/* Used for Init phase */
+#define OPAMP_CSR_UPDATE_PARAMETERS_INIT_MASK (OPAMP_CSR_TRIMOFFSETN | OPAMP_CSR_TRIMOFFSETP \
+ | OPAMP_CSR_USERTRIM | OPAMP_CSR_PGGAIN | OPAMP_CSR_VPSSEL \
+ | OPAMP_CSR_VMSSEL | OPAMP_CSR_TCMEN | OPAMP_CSR_VPSEL \
+ | OPAMP_CSR_VPSEL | OPAMP_CSR_FORCEVP)
+
+/**
+ * @}
+ */
+
+/** @defgroup OPAMP_Mode OPAMP Mode
+ * @{
+ */
+#define OPAMP_STANDALONE_MODE ((uint32_t)0x00000000) /*!< standalone mode */
+#define OPAMP_PGA_MODE OPAMP_CSR_VMSEL_1 /*!< PGA mode */
+#define OPAMP_FOLLOWER_MODE OPAMP_CSR_VMSEL /*!< follower mode */
+
+
+#define IS_OPAMP_FUNCTIONAL_NORMALMODE(INPUT) (((INPUT) == OPAMP_STANDALONE_MODE) || \
+ ((INPUT) == OPAMP_PGA_MODE) || \
+ ((INPUT) == OPAMP_FOLLOWER_MODE))
+
+/**
+ * @}
+ */
+
+/** @defgroup OPAMP_NonInvertingInput OPAMP Non Inverting Input
+ * @{
+ */
+
+#define OPAMP_NONINVERTINGINPUT_VP0 OPAMP_CSR_VPSEL /*!< VP0 (PA1 for OPAMP1, PA7 for OPAMP2, PB0 for OPAMP3, PB13 for OPAMP4)
+ connected to OPAMPx non inverting input */
+#define OPAMP_NONINVERTINGINPUT_VP1 ((uint32_t)0x00000000) /*!< VP1 (PA7 for OPAMP1, PD14 for OPAMP2, PB13 for OPAMP3, PD11 for OPAMP4)
+ connected to OPAMPx non inverting input */
+#define OPAMP_NONINVERTINGINPUT_VP2 OPAMP_CSR_VPSEL_1 /*!< VP2 (PA3 for OPAMP1, PB0 for OPAMP2, PA1 for OPAMP3, PA4 for OPAMP4)
+ connected to OPAMPx non inverting input */
+#define OPAMP_NONINVERTINGINPUT_VP3 OPAMP_CSR_VPSEL_0 /*!< vp3 (PA5 for OPAMP1, PB14 for OPAMP2, PA5 for OPAMP3, PB11 for OPAMP4)
+ connected to OPAMPx non inverting input */
+
+#define IS_OPAMP_NONINVERTING_INPUT(INPUT) (((INPUT) == OPAMP_NONINVERTINGINPUT_VP0) || \
+ ((INPUT) == OPAMP_NONINVERTINGINPUT_VP1) || \
+ ((INPUT) == OPAMP_NONINVERTINGINPUT_VP2) || \
+ ((INPUT) == OPAMP_NONINVERTINGINPUT_VP3))
+
+/**
+ * @}
+ */
+
+/** @defgroup OPAMP_InvertingInput OPAMP Inverting Input
+ * @{
+ */
+
+#define IOPAMP_INVERTINGINPUT_VM0 ((uint32_t)0x00000000) /*!< inverting input connected to VM0 */
+#define IOPAMP_INVERTINGINPUT_VM1 OPAMP_CSR_VMSEL_0 /*!< inverting input connected to VM1 */
+
+#define IS_OPAMP_INVERTING_INPUT(INPUT) (((INPUT) == IOPAMP_INVERTINGINPUT_VM0) || \
+ ((INPUT) == IOPAMP_INVERTINGINPUT_VM1))
+
+/**
+ * @}
+ */
+
+/** @defgroup OPAMP_TimerControlledMuxmode OPAMP Timer Controlled Mux mode
+ * @{
+ */
+ #define OPAMP_TIMERCONTROLLEDMUXMODE_DISABLE ((uint32_t)0x00000000) /*!< Timer controlled Mux mode disabled */
+ #define OPAMP_TIMERCONTROLLEDMUXMODE_ENABLE OPAMP_CSR_TCMEN /*!< Timer controlled Mux mode enabled */
+
+ #define IS_OPAMP_TIMERCONTROLLED_MUXMODE(MUXMODE) (((MUXMODE) == OPAMP_TIMERCONTROLLEDMUXMODE_DISABLE) || \
+ ((MUXMODE) == OPAMP_TIMERCONTROLLEDMUXMODE_ENABLE))
+/**
+ * @}
+ */
+
+ /** @defgroup OPAMP_NonInvertingInputSecondary OPAMP Non Inverting Input Secondary
+ * @{
+ */
+
+#define OPAMP_SEC_NONINVERTINGINPUT_VP0 OPAMP_CSR_VPSSEL /*!< VP0 (PA1 for OPAMP1, PA7 for OPAMP2, PB0 for OPAMP3, PB13 for OPAMP4)
+ connected to OPAMPx non inverting input */
+#define OPAMP_SEC_NONINVERTINGINPUT_VP1 ((uint32_t)0x00000000) /*!< VP1 (PA7 for OPAMP1, PD14 for OPAMP2, PB13 for OPAMP3, PD11 for OPAMP4)
+ connected to OPAMPx non inverting input */
+#define OPAMP_SEC_NONINVERTINGINPUT_VP2 OPAMP_CSR_VPSSEL_1 /*!< VP2 (PA3 for OPAMP1, PB0 for OPAMP2, PA1 for OPAMP3, PA4 for OPAMP4)
+ connected to OPAMPx non inverting input */
+#define OPAMP_SEC_NONINVERTINGINPUT_VP3 OPAMP_CSR_VPSSEL_0 /*!< VP3 (PA5 for OPAMP1, PB14 for OPAMP2, PA5 for OPAMP3, PB11 for OPAMP4)
+ connected to OPAMPx non inverting input */
+
+#define IS_OPAMP_SEC_NONINVERTINGINPUT(INPUT) (((INPUT) == OPAMP_SEC_NONINVERTINGINPUT_VP0) || \
+ ((INPUT) == OPAMP_SEC_NONINVERTINGINPUT_VP1) || \
+ ((INPUT) == OPAMP_SEC_NONINVERTINGINPUT_VP2) || \
+ ((INPUT) == OPAMP_SEC_NONINVERTINGINPUT_VP3))
+
+/**
+ * @}
+ */
+
+/** @defgroup OPAMP_InvertingInputSecondary OPAMP Inverting Input Secondary
+ * @{
+ */
+
+#define OPAMP_SEC_INVERTINGINPUT_VM0 ((uint32_t)0x00000000) /*!< VM0 (PC5 for OPAMP1 and OPAMP2, PB10 for OPAMP3 and OPAMP4)
+ connected to OPAMPx inverting input */
+#define OPAMP_SEC_INVERTINGINPUT_VM1 OPAMP_CSR_VMSSEL /*!< VM1 (PA3 for OPAMP1, PA5 for OPAMP2, PB2 for OPAMP3, PD8 for OPAMP4)
+ connected to OPAMPx inverting input */
+
+#define IS_OPAMP_SEC_INVERTINGINPUT(INPUT) (((INPUT) == OPAMP_SEC_INVERTINGINPUT_VM0) || \
+ ((INPUT) == OPAMP_SEC_INVERTINGINPUT_VM1))
+
+/**
+ * @}
+ */
+
+/** @defgroup OPAMP_PgaConnect OPAMP Pga Connect
+ * @{
+ */
+
+#define OPAMP_PGACONNECT_NO ((uint32_t)0x00000000) /*!< In PGA mode, the non inverting input is not connected */
+#define OPAMP_PGACONNECT_VM0 OPAMP_CSR_PGGAIN_3 /*!< In PGA mode, the non inverting input is connected to VM0 */
+#define OPAMP_PGACONNECT_VM1 (OPAMP_CSR_PGGAIN_2 | OPAMP_CSR_PGGAIN_3) /*!< In PGA mode, the non inverting input is connected to VM1 */
+
+#define IS_OPAMP_PGACONNECT(CONNECT) (((CONNECT) == OPAMP_PGACONNECT_NO) || \
+ ((CONNECT) == OPAMP_PGACONNECT_VM0) || \
+ ((CONNECT) == OPAMP_PGACONNECT_VM1))
+/**
+ * @}
+ */
+
+
+/** @defgroup OPAMP_PgaGain OPAMP Pga Gain
+ * @{
+ */
+
+#define OPAMP_PGA_GAIN_2 ((uint32_t)0x00000000) /*!< PGA gain = 2 */
+#define OPAMP_PGA_GAIN_4 OPAMP_CSR_PGGAIN_0 /*!< PGA gain = 4 */
+#define OPAMP_PGA_GAIN_8 OPAMP_CSR_PGGAIN_1 /*!< PGA gain = 8 */
+#define OPAMP_PGA_GAIN_16 (OPAMP_CSR_PGGAIN_0 | OPAMP_CSR_PGGAIN_1) /*!< PGA gain = 16 */
+
+#define IS_OPAMP_PGA_GAIN(GAIN) (((GAIN) == OPAMP_PGA_GAIN_2) || \
+ ((GAIN) == OPAMP_PGA_GAIN_4) || \
+ ((GAIN) == OPAMP_PGA_GAIN_8) || \
+ ((GAIN) == OPAMP_PGA_GAIN_16))
+/**
+ * @}
+ */
+
+/** @defgroup OPAMP_UserTrimming OPAMP User Trimming
+ * @{
+ */
+
+#define OPAMP_TRIMMING_FACTORY ((uint32_t)0x00000000) /*!< Factory trimming */
+#define OPAMP_TRIMMING_USER OPAMP_CSR_USERTRIM /*!< User trimming */
+
+#define IS_OPAMP_TRIMMING(TRIMMING) (((TRIMMING) == OPAMP_TRIMMING_FACTORY) || \
+ ((TRIMMING) == OPAMP_TRIMMING_USER))
+
+/** @defgroup OPAMP_FactoryTrimming OPAMP Factory Trimming
+ * @{
+ */
+
+#define OPAMP_FACTORYTRIMMING_DUMMY ((uint32_t)0xFFFFFFFF) /*!< Dummy trimming value */
+
+#define OPAMP_FACTORYTRIMMING_N ((uint32_t)0x00000000) /*!< Offset trimming N */
+#define OPAMP_FACTORYTRIMMING_P ((uint32_t)0x00000001) /*!< Offset trimming P */
+
+#define IS_OPAMP_FACTORYTRIMMING(TRIMMING) (((TRIMMING) == OPAMP_FACTORYTRIMMING_N) || \
+ ((TRIMMING) == OPAMP_FACTORYTRIMMING_P))
+
+/**
+ * @}
+ */
+
+
+/** @defgroup OPAMP_TrimmingValue OPAMP Trimming Value
+ * @{
+ */
+
+#define IS_OPAMP_TRIMMINGVALUE(TRIMMINGVALUE) ((TRIMMINGVALUE) <= 0x1F)
+
+
+/**
+ * @}
+ */
+
+
+/** @defgroup OPAMP_Input OPAMP Input
+ * @{
+ */
+
+#define OPAMP_INPUT_INVERTING ((uint32_t) 24) /*!< Inverting input */
+#define OPAMP_INPUT_NONINVERTING ((uint32_t) 19) /*!< Non inverting input */
+
+#define IS_OPAMP_INPUT(INPUT) (((INPUT) == OPAMP_INPUT_INVERTING) || \
+ ((INPUT) == OPAMP_INPUT_NONINVERTING))
+/**
+ * @}
+ */
+
+
+/** @defgroup OPAMP_VREF OPAMP VREF
+ * @{
+ */
+
+#define OPAMP_VREF_3VDDA ((uint32_t)0x00000000) /*!< OPMAP Vref = 3.3% VDDA */
+#define OPAMP_VREF_10VDDA OPAMP_CSR_CALSEL_0 /*!< OPMAP Vref = 10% VDDA */
+#define OPAMP_VREF_50VDDA OPAMP_CSR_CALSEL_1 /*!< OPMAP Vref = 50% VDDA */
+#define OPAMP_VREF_90VDDA OPAMP_CSR_CALSEL /*!< OPMAP Vref = 90% VDDA */
+
+#define IS_OPAMP_VREF(VREF) (((VREF) == OPAMP_VREF_3VDDA) || \
+ ((VREF) == OPAMP_VREF_10VDDA) || \
+ ((VREF) == OPAMP_VREF_50VDDA) || \
+ ((VREF) == OPAMP_VREF_90VDDA))
+
+/**
+ * @}
+ */
+
+ /** @defgroup OPAMP_Vref2ADCforCalib OPAMP Vref2ADCforCalib
+ */
+
+#define OPAMP_VREF_NOTCONNECTEDTO_ADC ((uint32_t)0x00000000) /*!< VREF not connected to ADC */
+#define OPAMP_VREF_CONNECTEDTO_ADC ((uint32_t)0x00000001) /*!< VREF not connected to ADC */
+
+#define IS_OPAMP_ALLOPAMPVREF_CONNECT(CONNECT) (((CONNECT) == OPAMP_VREF_NOTCONNECTEDTO_ADC) || \
+ ((CONNECT) == OPAMP_VREF_CONNECTEDTO_ADC))
+
+
+ /**
+ * @}
+ */
+
+ /**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup OPAMP_Exported_Macros OPAMP Exported Macros
+ * @{
+ */
+
+/** @brief Reset OPAMP handle state
+ * @param __HANDLE__: OPAMP handle.
+ * @retval None
+ */
+#define __HAL_OPAMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_OPAMP_STATE_RESET)
+
+/**
+ * @}
+ */
+
+/* Include OPAMP HAL Extended module */
+#include "stm32f3xx_hal_opamp_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup OPAMP_Exported_Functions OPAMP Exported Functions
+ * @{
+ */
+
+/** @defgroup OPAMP_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_OPAMP_Init(OPAMP_HandleTypeDef *hopamp);
+HAL_StatusTypeDef HAL_OPAMP_DeInit (OPAMP_HandleTypeDef *hopamp);
+void HAL_OPAMP_MspInit(OPAMP_HandleTypeDef *hopamp);
+void HAL_OPAMP_MspDeInit(OPAMP_HandleTypeDef *hopamp);
+/**
+ * @}
+ */
+
+
+/** @defgroup OPAMP_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+
+/* I/O operation functions *****************************************************/
+HAL_StatusTypeDef HAL_OPAMP_Start(OPAMP_HandleTypeDef *hopamp);
+HAL_StatusTypeDef HAL_OPAMP_Stop(OPAMP_HandleTypeDef *hopamp);
+HAL_StatusTypeDef HAL_OPAMP_SelfCalibrate(OPAMP_HandleTypeDef *hopamp);
+
+/**
+ * @}
+ */
+
+/** @defgroup OPAMP_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_OPAMP_Lock(OPAMP_HandleTypeDef *hopamp);
+
+/**
+ * @}
+ */
+
+/** @defgroup OPAMP_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+
+/* Peripheral State functions **************************************************/
+HAL_OPAMP_StateTypeDef HAL_OPAMP_GetState(OPAMP_HandleTypeDef *hopamp);
+OPAMP_TrimmingValueTypeDef HAL_OPAMP_GetTrimOffset (OPAMP_HandleTypeDef *hopamp, uint32_t trimmingoffset);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_OPAMP_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_opamp_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,107 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_opamp_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of OPAMP HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_OPAMP_EX_H
+#define __STM32F3xx_HAL_OPAMP_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup OPAMPEx OPAMP Extended HAL module driver
+ * @{
+ */
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup OPAMPEx_Exported_Functions OPAMP Extended Exported Functions
+ * @{
+ */
+
+/** @addtogroup OPAMPEx_Exported_Functions_Group1 Extended Input and Output operation functions
+ * @{
+ */
+
+/* I/O operation functions *****************************************************/
+
+#if defined(STM32F302xE) || \
+ defined(STM32F302xC)
+
+HAL_StatusTypeDef HAL_OPAMPEx_SelfCalibrateAll(OPAMP_HandleTypeDef *hopamp1, OPAMP_HandleTypeDef *hopamp2);
+
+#endif /* STM32F302xE || */
+ /* STM32F302xC */
+
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx)
+HAL_StatusTypeDef HAL_OPAMPEx_SelfCalibrateAll(OPAMP_HandleTypeDef *hopamp1, OPAMP_HandleTypeDef *hopamp2, OPAMP_HandleTypeDef *hopamp3, OPAMP_HandleTypeDef *hopamp4);
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_OPAMP_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_pccard.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,219 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_pccard.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of PCCARD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_PCCARD_H
+#define __STM32F3xx_HAL_PCCARD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+ #include "stm32f3xx_ll_fmc.h"
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCCARD
+ * @{
+ */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+
+/* Exported typedef ----------------------------------------------------------*/
+/** @defgroup PCCARD_Exported_Types PCCARD Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL PCCARD State structures definition
+ */
+typedef enum
+{
+ HAL_PCCARD_STATE_RESET = 0x00, /*!< PCCARD peripheral not yet initialized or disabled */
+ HAL_PCCARD_STATE_READY = 0x01, /*!< PCCARD peripheral ready */
+ HAL_PCCARD_STATE_BUSY = 0x02, /*!< PCCARD peripheral busy */
+ HAL_PCCARD_STATE_ERROR = 0x04 /*!< PCCARD peripheral error */
+}HAL_PCCARD_StateTypeDef;
+
+typedef enum
+{
+ CF_SUCCESS = 0,
+ CF_ONGOING,
+ CF_ERROR,
+ CF_TIMEOUT
+}CF_StatusTypedef;
+
+/**
+ * @brief FMC_PCCARD handle Structure definition
+ */
+typedef struct
+{
+ FMC_PCCARD_TypeDef *Instance; /*!< Register base address for PCCARD device */
+
+ FMC_PCCARD_InitTypeDef Init; /*!< PCCARD device control configuration parameters */
+
+ __IO HAL_PCCARD_StateTypeDef State; /*!< PCCARD device access state */
+
+ HAL_LockTypeDef Lock; /*!< PCCARD Lock */
+
+}PCCARD_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PCCARD_Exported_Constants PCCARD Exported Constants
+ * @{
+ */
+
+#define CF_DEVICE_ADDRESS ((uint32_t)0x90000000)
+#define CF_ATTRIBUTE_SPACE_ADDRESS ((uint32_t)0x98000000) /* Attribute space size to @0x9BFF FFFF */
+#define CF_COMMON_SPACE_ADDRESS CF_DEVICE_ADDRESS /* Common space size to @0x93FF FFFF */
+#define CF_IO_SPACE_ADDRESS ((uint32_t)0x9C000000) /* IO space size to @0x9FFF FFFF */
+#define CF_IO_SPACE_PRIMARY_ADDR ((uint32_t)0x9C0001F0) /* IO space size to @0x9FFF FFFF */
+
+/* Compact Flash-ATA registers description */
+#define CF_DATA ((uint8_t)0x00) /* Data register */
+#define CF_SECTOR_COUNT ((uint8_t)0x02) /* Sector Count register */
+#define CF_SECTOR_NUMBER ((uint8_t)0x03) /* Sector Number register */
+#define CF_CYLINDER_LOW ((uint8_t)0x04) /* Cylinder low register */
+#define CF_CYLINDER_HIGH ((uint8_t)0x05) /* Cylinder high register */
+#define CF_CARD_HEAD ((uint8_t)0x06) /* Card/Head register */
+#define CF_STATUS_CMD ((uint8_t)0x07) /* Status(read)/Command(write) register */
+#define CF_STATUS_CMD_ALTERNATE ((uint8_t)0x0E) /* Alternate Status(read)/Command(write) register */
+#define CF_COMMON_DATA_AREA ((uint16_t)0x0400) /* Start of data area (for Common access only!) */
+
+/* Compact Flash-ATA commands */
+#define CF_READ_SECTOR_CMD ((uint8_t)0x20)
+#define CF_WRITE_SECTOR_CMD ((uint8_t)0x30)
+#define CF_ERASE_SECTOR_CMD ((uint8_t)0xC0)
+#define CF_IDENTIFY_CMD ((uint8_t)0xEC)
+
+/* Compact Flash status */
+#define CF_TIMEOUT_ERROR ((uint8_t)0x60)
+#define CF_BUSY ((uint8_t)0x80)
+#define CF_PROGR ((uint8_t)0x01)
+#define CF_READY ((uint8_t)0x40)
+
+#define CF_SECTOR_SIZE ((uint32_t)255) /* In half words */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PCCARD_Exported_Macros PCCARD Exported Macros
+ * @{
+ */
+
+/** @brief Reset PCCARD handle state
+ * @param __HANDLE__: specifies the PCCARD handle.
+ * @retval None
+ */
+#define __HAL_PCCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_PCCARD_STATE_RESET)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCCARD_Exported_Functions PCCARD Exported Functions
+ * @{
+ */
+
+/** @addtogroup PCCARD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_PCCARD_Init(PCCARD_HandleTypeDef *hpccard, FMC_NAND_PCC_TimingTypeDef *ComSpaceTiming, FMC_NAND_PCC_TimingTypeDef *AttSpaceTiming, FMC_NAND_PCC_TimingTypeDef *IOSpaceTiming);
+HAL_StatusTypeDef HAL_PCCARD_DeInit(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_MspInit(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_MspDeInit(PCCARD_HandleTypeDef *hpccard);
+/**
+ * @}
+ */
+
+/** @addtogroup PCCARD_Exported_Functions_Group2 Input Output and memory functions
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_CF_Read_ID(PCCARD_HandleTypeDef *hpccard, uint8_t CompactFlash_ID[], uint8_t *pStatus);
+HAL_StatusTypeDef HAL_CF_Write_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, uint8_t *pStatus);
+HAL_StatusTypeDef HAL_CF_Read_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, uint8_t *pStatus);
+HAL_StatusTypeDef HAL_CF_Erase_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t SectorAddress, uint8_t *pStatus);
+HAL_StatusTypeDef HAL_CF_Reset(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_IRQHandler(PCCARD_HandleTypeDef *hpccard);
+void HAL_PCCARD_ITCallback(PCCARD_HandleTypeDef *hpccard);
+
+/**
+ * @}
+ */
+
+/** @defgroup PCCARD_Exported_Functions_Group3 Peripheral State functions
+ * @{
+ */
+/* PCCARD State functions *******************************************************/
+HAL_PCCARD_StateTypeDef HAL_PCCARD_GetState(PCCARD_HandleTypeDef *hpccard);
+CF_StatusTypedef HAL_CF_GetStatus(PCCARD_HandleTypeDef *hpccard);
+CF_StatusTypedef HAL_CF_ReadStatus(PCCARD_HandleTypeDef *hpccard);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_PCCARD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_pcd.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,798 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_pcd.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of PCD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_PCD_H
+#define __STM32F3xx_HAL_PCD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F302x8) || \
+ defined(STM32F373xC)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup PCD_Exported_Types PCD Exported Types
+ * @{
+ */
+
+ /**
+ * @brief PCD State structures definition
+ */
+typedef enum
+{
+ PCD_READY = 0x00,
+ PCD_ERROR = 0x01,
+ PCD_BUSY = 0x02,
+ PCD_TIMEOUT = 0x03
+} PCD_StateTypeDef;
+
+typedef enum
+{
+ /* double buffered endpoint direction */
+ PCD_EP_DBUF_OUT,
+ PCD_EP_DBUF_IN,
+ PCD_EP_DBUF_ERR,
+}PCD_EP_DBUF_DIR;
+
+/* endpoint buffer number */
+typedef enum
+{
+ PCD_EP_NOBUF,
+ PCD_EP_BUF0,
+ PCD_EP_BUF1
+}PCD_EP_BUF_NUM;
+
+/**
+ * @brief PCD Initialization Structure definition
+ */
+typedef struct
+{
+ uint32_t dev_endpoints; /*!< Device Endpoints number.
+ This parameter depends on the used USB core.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint32_t speed; /*!< USB Core speed.
+ This parameter can be any value of @ref USB_Core_Speed */
+
+ uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size.
+ This parameter can be any value of @ref USB_EP0_MPS */
+
+ uint32_t phy_itface; /*!< Select the used PHY interface.
+ This parameter can be any value of @ref USB_Core_PHY */
+
+ uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */
+
+ uint32_t low_power_enable; /*!< Enable or disable Low Power mode */
+
+ uint32_t lpm_enable; /*!< Enable or disable Battery charging. */
+
+ uint32_t battery_charging_enable; /*!< Enable or disable Battery charging. */
+
+}PCD_InitTypeDef;
+
+typedef struct
+{
+ uint8_t num; /*!< Endpoint number
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint8_t is_in; /*!< Endpoint direction
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t is_stall; /*!< Endpoint stall condition
+ This parameter must be a number between Min_Data = 0 and Max_Data = 1 */
+
+ uint8_t type; /*!< Endpoint type
+ This parameter can be any value of @ref USB_EP_Type */
+
+ uint16_t pmaadress; /*!< PMA Address
+ This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
+
+
+ uint16_t pmaaddr0; /*!< PMA Address0
+ This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
+
+
+ uint16_t pmaaddr1; /*!< PMA Address1
+ This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
+
+
+ uint8_t doublebuffer; /*!< Double buffer enable
+ This parameter can be 0 or 1 */
+
+ uint32_t maxpacket; /*!< Endpoint Max packet size
+ This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
+
+ uint8_t *xfer_buff; /*!< Pointer to transfer buffer */
+
+
+ uint32_t xfer_len; /*!< Current transfer length */
+
+ uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */
+
+}PCD_EPTypeDef;
+
+typedef USB_TypeDef PCD_TypeDef;
+
+/**
+ * @brief PCD Handle Structure definition
+ */
+typedef struct
+{
+ PCD_TypeDef *Instance; /*!< Register base address */
+ PCD_InitTypeDef Init; /*!< PCD required parameters */
+ __IO uint8_t USB_Address; /*!< USB Address */
+ PCD_EPTypeDef IN_ep[8]; /*!< IN endpoint parameters */
+ PCD_EPTypeDef OUT_ep[8]; /*!< OUT endpoint parameters */
+ HAL_LockTypeDef Lock; /*!< PCD peripheral status */
+ __IO PCD_StateTypeDef State; /*!< PCD communication state */
+ uint32_t Setup[12]; /*!< Setup packet buffer */
+ void *pData; /*!< Pointer to upper stack Handler */
+
+} PCD_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+#include "stm32f3xx_hal_pcd_ex.h"
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PCD_Exported_Constants PCD Exported Constants
+ * @{
+ */
+
+/** @defgroup USB_Core_Speed USB Core Speed
+ * @{
+ */
+#define PCD_SPEED_HIGH 0 /* Not Supported */
+#define PCD_SPEED_FULL 2
+/**
+ * @}
+ */
+
+/** @defgroup USB_Core_PHY USB Core PHY
+ * @{
+ */
+#define PCD_PHY_EMBEDDED 2
+/**
+ * @}
+ */
+
+/** @defgroup USB_EP0_MPS USB EP0 MPS
+ * @{
+ */
+#define DEP0CTL_MPS_64 0
+#define DEP0CTL_MPS_32 1
+#define DEP0CTL_MPS_16 2
+#define DEP0CTL_MPS_8 3
+
+#define PCD_EP0MPS_64 DEP0CTL_MPS_64
+#define PCD_EP0MPS_32 DEP0CTL_MPS_32
+#define PCD_EP0MPS_16 DEP0CTL_MPS_16
+#define PCD_EP0MPS_08 DEP0CTL_MPS_8
+/**
+ * @}
+ */
+
+/** @defgroup USB_EP_Type USB EP Type
+ * @{
+ */
+#define PCD_EP_TYPE_CTRL 0
+#define PCD_EP_TYPE_ISOC 1
+#define PCD_EP_TYPE_BULK 2
+#define PCD_EP_TYPE_INTR 3
+/**
+ * @}
+ */
+
+/** @defgroup USB_ENDP USB ENDP
+ * @{
+ */
+
+#define PCD_ENDP0 ((uint8_t)0)
+#define PCD_ENDP1 ((uint8_t)1)
+#define PCD_ENDP2 ((uint8_t)2)
+#define PCD_ENDP3 ((uint8_t)3)
+#define PCD_ENDP4 ((uint8_t)4)
+#define PCD_ENDP5 ((uint8_t)5)
+#define PCD_ENDP6 ((uint8_t)6)
+#define PCD_ENDP7 ((uint8_t)7)
+
+/* Endpoint Kind */
+#define PCD_SNG_BUF 0
+#define PCD_DBL_BUF 1
+
+#define IS_PCD_ALL_INSTANCE IS_USB_ALL_INSTANCE
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup PCD_Exported_Macros PCD Exported Macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISTR) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) = ~(__INTERRUPT__))
+
+#define USB_EXTI_LINE_WAKEUP ((uint32_t)0x00040000) /*!< External interrupt line 18 Connected to the USB FS EXTI Line */
+
+#define __HAL_USB_EXTI_ENABLE_IT() EXTI->IMR |= USB_EXTI_LINE_WAKEUP
+#define __HAL_USB_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_EXTI_LINE_WAKEUP)
+#define __HAL_USB_EXTI_GENERATE_SWIT(__EXTILINE__) (EXTI->SWIER |= (__EXTILINE__))
+
+#define __HAL_USB_EXTI_GET_FLAG() EXTI->PR & (USB_EXTI_LINE_WAKEUP)
+#define __HAL_USB_EXTI_CLEAR_FLAG() EXTI->PR = USB_EXTI_LINE_WAKEUP
+
+#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER() do {\
+ EXTI->FTSR &= ~(USB_EXTI_LINE_WAKEUP);\
+ EXTI->RTSR |= USB_EXTI_LINE_WAKEUP;\
+ } while(0)
+
+#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER() do {\
+ EXTI->FTSR |= (USB_EXTI_LINE_WAKEUP);\
+ EXTI->RTSR &= ~(USB_EXTI_LINE_WAKEUP);\
+ } while(0)
+
+#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER() do {\
+ EXTI->RTSR &= ~(USB_EXTI_LINE_WAKEUP);\
+ EXTI->FTSR &= ~(USB_EXTI_LINE_WAKEUP);\
+ EXTI->RTSR |= USB_EXTI_LINE_WAKEUP;\
+ EXTI->FTSR |= USB_EXTI_LINE_WAKEUP;\
+ } while(0)
+/**
+ * @}
+ */
+
+/* Internal macros -----------------------------------------------------------*/
+
+/** @defgroup PCD_Private_Macros PCD Private Macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+
+/* SetENDPOINT */
+#define PCD_SET_ENDPOINT(USBx, bEpNum,wRegValue) (*(&USBx->EP0R + bEpNum * 2)= (uint16_t)wRegValue)
+
+/* GetENDPOINT */
+#define PCD_GET_ENDPOINT(USBx, bEpNum) (*(&USBx->EP0R + bEpNum * 2))
+
+
+
+/**
+ * @brief sets the type in the endpoint register(bits EP_TYPE[1:0])
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wType: Endpoint Type.
+ * @retval None
+ */
+#define PCD_SET_EPTYPE(USBx, bEpNum,wType) (PCD_SET_ENDPOINT(USBx, bEpNum,\
+ ((PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EP_T_MASK) | wType )))
+
+/**
+ * @brief gets the type in the endpoint register(bits EP_TYPE[1:0])
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval Endpoint Type
+ */
+#define PCD_GET_EPTYPE(USBx, bEpNum) (PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EP_T_FIELD)
+
+
+/**
+ * @brief free buffer used from the application realizing it to the line
+ toggles bit SW_BUF in the double buffered endpoint register
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param bDir: Direction
+ * @retval None
+ */
+#define PCD_FreeUserBuffer(USBx, bEpNum, bDir)\
+{\
+ if (bDir == PCD_EP_DBUF_OUT)\
+ { /* OUT double buffered endpoint */\
+ PCD_TX_DTOG(USBx, bEpNum);\
+ }\
+ else if (bDir == PCD_EP_DBUF_IN)\
+ { /* IN double buffered endpoint */\
+ PCD_RX_DTOG(USBx, bEpNum);\
+ }\
+}
+
+/**
+ * @brief gets direction of the double buffered endpoint
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval EP_DBUF_OUT, EP_DBUF_IN,
+ * EP_DBUF_ERR if the endpoint counter not yet programmed.
+ */
+#define PCD_GET_DB_DIR(USBx, bEpNum)\
+{\
+ if ((uint16_t)(*PCD_EP_RX_CNT(USBx, bEpNum) & 0xFC00) != 0)\
+ return(PCD_EP_DBUF_OUT);\
+ else if (((uint16_t)(*PCD_EP_TX_CNT(USBx, bEpNum)) & 0x03FF) != 0)\
+ return(PCD_EP_DBUF_IN);\
+ else\
+ return(PCD_EP_DBUF_ERR);\
+}
+
+/**
+ * @brief sets the status for tx transfer (bits STAT_TX[1:0]).
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wState: new state
+ * @retval None
+ */
+#define PCD_SET_EP_TX_STATUS(USBx, bEpNum, wState) {\
+ register uint16_t _wRegVal; \
+ \
+ _wRegVal = PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPTX_DTOGMASK;\
+ /* toggle first bit ? */ \
+ if((USB_EPTX_DTOG1 & wState)!= 0) \
+ _wRegVal ^= USB_EPTX_DTOG1; \
+ /* toggle second bit ? */ \
+ if((USB_EPTX_DTOG2 & wState)!= 0) \
+ _wRegVal ^= USB_EPTX_DTOG2; \
+ PCD_SET_ENDPOINT(USBx, bEpNum, (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX)); \
+ } /* PCD_SET_EP_TX_STATUS */
+
+/**
+ * @brief sets the status for rx transfer (bits STAT_TX[1:0])
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wState: new state
+ * @retval None
+ */
+#define PCD_SET_EP_RX_STATUS(USBx, bEpNum,wState) {\
+ register uint16_t _wRegVal; \
+ \
+ _wRegVal = PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPRX_DTOGMASK;\
+ /* toggle first bit ? */ \
+ if((USB_EPRX_DTOG1 & wState)!= 0) \
+ _wRegVal ^= USB_EPRX_DTOG1; \
+ /* toggle second bit ? */ \
+ if((USB_EPRX_DTOG2 & wState)!= 0) \
+ _wRegVal ^= USB_EPRX_DTOG2; \
+ PCD_SET_ENDPOINT(USBx, bEpNum, (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX)); \
+ } /* PCD_SET_EP_RX_STATUS */
+
+/**
+ * @brief sets the status for rx & tx (bits STAT_TX[1:0] & STAT_RX[1:0])
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wStaterx: new state.
+ * @param wStatetx: new state.
+ * @retval None
+ */
+#define PCD_SET_EP_TXRX_STATUS(USBx,bEpNum,wStaterx,wStatetx) {\
+ register uint32_t _wRegVal; \
+ \
+ _wRegVal = PCD_GET_ENDPOINT(USBx, bEpNum) & (USB_EPRX_DTOGMASK |USB_EPTX_STAT) ;\
+ /* toggle first bit ? */ \
+ if((USB_EPRX_DTOG1 & wStaterx)!= 0) \
+ _wRegVal ^= USB_EPRX_DTOG1; \
+ /* toggle second bit ? */ \
+ if((USB_EPRX_DTOG2 & wStaterx)!= 0) \
+ _wRegVal ^= USB_EPRX_DTOG2; \
+ /* toggle first bit ? */ \
+ if((USB_EPTX_DTOG1 & wStatetx)!= 0) \
+ _wRegVal ^= USB_EPTX_DTOG1; \
+ /* toggle second bit ? */ \
+ if((USB_EPTX_DTOG2 & wStatetx)!= 0) \
+ _wRegVal ^= USB_EPTX_DTOG2; \
+ PCD_SET_ENDPOINT(USBx, bEpNum, _wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX); \
+ } /* PCD_SET_EP_TXRX_STATUS */
+
+/**
+ * @brief gets the status for tx/rx transfer (bits STAT_TX[1:0]
+ * /STAT_RX[1:0])
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval status
+ */
+#define PCD_GET_EP_TX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPTX_STAT)
+
+#define PCD_GET_EP_RX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPRX_STAT)
+
+/**
+ * @brief sets directly the VALID tx/rx-status into the endpoint register
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_EP_TX_VALID(USBx, bEpNum) (PCD_SET_EP_TX_STATUS(USBx, bEpNum, USB_EP_TX_VALID))
+
+#define PCD_SET_EP_RX_VALID(USBx, bEpNum) (PCD_SET_EP_RX_STATUS(USBx, bEpNum, USB_EP_RX_VALID))
+
+/**
+ * @brief checks stall condition in an endpoint.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval TRUE = endpoint in stall condition.
+ */
+#define PCD_GET_EP_TX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_TX_STATUS(USBx, bEpNum) \
+ == USB_EP_TX_STALL)
+#define PCD_GET_EP_RX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_RX_STATUS(USBx, bEpNum) \
+ == USB_EP_RX_STALL)
+
+/**
+ * @brief set & clear EP_KIND bit.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT(USBx, bEpNum, \
+ (USB_EP_CTR_RX|USB_EP_CTR_TX|((PCD_GET_ENDPOINT(USBx, bEpNum) | USB_EP_KIND) & USB_EPREG_MASK))))
+#define PCD_CLEAR_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT(USBx, bEpNum, \
+ (USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPKIND_MASK))))
+
+/**
+ * @brief Sets/clears directly STATUS_OUT bit in the endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_OUT_STATUS(USBx, bEpNum) PCD_SET_EP_KIND(USBx, bEpNum)
+#define PCD_CLEAR_OUT_STATUS(USBx, bEpNum) PCD_CLEAR_EP_KIND(USBx, bEpNum)
+
+/**
+ * @brief Sets/clears directly EP_KIND bit in the endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_EP_DBUF(USBx, bEpNum) PCD_SET_EP_KIND(USBx, bEpNum)
+#define PCD_CLEAR_EP_DBUF(USBx, bEpNum) PCD_CLEAR_EP_KIND(USBx, bEpNum)
+
+/**
+ * @brief Clears bit CTR_RX / CTR_TX in the endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_CLEAR_RX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT(USBx, bEpNum,\
+ PCD_GET_ENDPOINT(USBx, bEpNum) & 0x7FFF & USB_EPREG_MASK))
+#define PCD_CLEAR_TX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT(USBx, bEpNum,\
+ PCD_GET_ENDPOINT(USBx, bEpNum) & 0xFF7F & USB_EPREG_MASK))
+
+/**
+ * @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_RX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT(USBx, bEpNum, \
+ USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_RX | (PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPREG_MASK)))
+#define PCD_TX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT(USBx, bEpNum, \
+ USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_TX | (PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPREG_MASK)))
+
+/**
+ * @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_CLEAR_RX_DTOG(USBx, bEpNum) if((PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EP_DTOG_RX) != 0)\
+ PCD_RX_DTOG(USBx, bEpNum)
+#define PCD_CLEAR_TX_DTOG(USBx, bEpNum) if((PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EP_DTOG_TX) != 0)\
+ PCD_TX_DTOG(USBx, bEpNum)
+
+/**
+ * @brief Sets address in an endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param bAddr: Address.
+ * @retval None
+ */
+#define PCD_SET_EP_ADDRESS(USBx, bEpNum,bAddr) PCD_SET_ENDPOINT(USBx, bEpNum,\
+ USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPREG_MASK) | bAddr)
+
+#define PCD_GET_EP_ADDRESS(USBx, bEpNum) ((uint8_t)(PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPADDR_FIELD))
+
+/**
+ * @brief sets address of the tx/rx buffer.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wAddr: address to be set (must be word aligned).
+ * @retval None
+ */
+#define PCD_SET_EP_TX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_TX_ADDRESS(USBx, bEpNum) = ((wAddr >> 1) << 1))
+#define PCD_SET_EP_RX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_RX_ADDRESS(USBx, bEpNum) = ((wAddr >> 1) << 1))
+
+/**
+ * @brief Gets address of the tx/rx buffer.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval address of the buffer.
+ */
+#define PCD_GET_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_TX_ADDRESS(USBx, bEpNum))
+#define PCD_GET_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_RX_ADDRESS(USBx, bEpNum))
+
+/**
+ * @brief Sets counter of rx buffer with no. of blocks.
+ * @param dwReg: Register
+ * @param wCount: Counter.
+ * @param wNBlocks: no. of Blocks.
+ * @retval None
+ */
+#define PCD_CALC_BLK32(dwReg,wCount,wNBlocks) {\
+ wNBlocks = wCount >> 5;\
+ if((wCount & 0x1f) == 0)\
+ wNBlocks--;\
+ *pdwReg = (uint16_t)((wNBlocks << 10) | 0x8000);\
+ }/* PCD_CALC_BLK32 */
+
+#define PCD_CALC_BLK2(dwReg,wCount,wNBlocks) {\
+ wNBlocks = wCount >> 1;\
+ if((wCount & 0x1) != 0)\
+ wNBlocks++;\
+ *pdwReg = (uint16_t)(wNBlocks << 10);\
+ }/* PCD_CALC_BLK2 */
+
+#define PCD_SET_EP_CNT_RX_REG(dwReg,wCount) {\
+ uint16_t wNBlocks;\
+ if(wCount > 62){PCD_CALC_BLK32(dwReg,wCount,wNBlocks);}\
+ else {PCD_CALC_BLK2(dwReg,wCount,wNBlocks);}\
+ }/* PCD_SET_EP_CNT_RX_REG */
+
+#define PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum,wCount) {\
+ uint16_t *pdwReg = PCD_EP_TX_CNT(USBx, bEpNum); \
+ PCD_SET_EP_CNT_RX_REG(pdwReg, wCount);\
+ }
+/**
+ * @brief sets counter for the tx/rx buffer.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wCount: Counter value.
+ * @retval None
+ */
+#define PCD_SET_EP_TX_CNT(USBx, bEpNum,wCount) (*PCD_EP_TX_CNT(USBx, bEpNum) = wCount)
+
+
+/**
+ * @brief gets counter of the tx buffer.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval Counter value
+ */
+#define PCD_GET_EP_TX_CNT(USBx, bEpNum)((uint16_t)(*PCD_EP_TX_CNT(USBx, bEpNum)) & 0x3ff)
+#define PCD_GET_EP_RX_CNT(USBx, bEpNum)((uint16_t)(*PCD_EP_RX_CNT(USBx, bEpNum)) & 0x3ff)
+
+/**
+ * @brief Sets buffer 0/1 address in a double buffer endpoint.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wBuf0Addr: buffer 0 address.
+ * @retval Counter value
+ */
+#define PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum,wBuf0Addr) {PCD_SET_EP_TX_ADDRESS(USBx, bEpNum, wBuf0Addr);}
+#define PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum,wBuf1Addr) {PCD_SET_EP_RX_ADDRESS(USBx, bEpNum, wBuf1Addr);}
+
+/**
+ * @brief Sets addresses in a double buffer endpoint.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wBuf0Addr: buffer 0 address.
+ * @param wBuf1Addr = buffer 1 address.
+ * @retval None
+ */
+#define PCD_SET_EP_DBUF_ADDR(USBx, bEpNum,wBuf0Addr,wBuf1Addr) { \
+ PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum, wBuf0Addr);\
+ PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum, wBuf1Addr);\
+ } /* PCD_SET_EP_DBUF_ADDR */
+
+/**
+ * @brief Gets buffer 0/1 address of a double buffer endpoint.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_GET_EP_DBUF0_ADDR(USBx, bEpNum) (PCD_GET_EP_TX_ADDRESS(USBx, bEpNum))
+#define PCD_GET_EP_DBUF1_ADDR(USBx, bEpNum) (PCD_GET_EP_RX_ADDRESS(USBx, bEpNum))
+
+/**
+ * @brief Gets buffer 0/1 address of a double buffer endpoint.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param bDir: endpoint dir EP_DBUF_OUT = OUT
+ * EP_DBUF_IN = IN
+ * @param wCount: Counter value
+ * @retval None
+ */
+#define PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount) { \
+ if(bDir == PCD_EP_DBUF_OUT)\
+ /* OUT endpoint */ \
+ {PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum,wCount);} \
+ else if(bDir == PCD_EP_DBUF_IN)\
+ /* IN endpoint */ \
+ *PCD_EP_TX_CNT(USBx, bEpNum) = (uint32_t)wCount; \
+ } /* SetEPDblBuf0Count*/
+
+#define PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount) { \
+ if(bDir == PCD_EP_DBUF_OUT)\
+ /* OUT endpoint */ \
+ {PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount);}\
+ else if(bDir == PCD_EP_DBUF_IN)\
+ /* IN endpoint */\
+ *PCD_EP_RX_CNT(USBx, bEpNum) = (uint32_t)wCount; \
+ } /* SetEPDblBuf1Count */
+
+#define PCD_SET_EP_DBUF_CNT(USBx, bEpNum, bDir, wCount) {\
+ PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount); \
+ PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount); \
+ } /* PCD_SET_EP_DBUF_CNT */
+
+/**
+ * @brief Gets buffer 0/1 rx/tx counter for double buffering.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_GET_EP_DBUF0_CNT(USBx, bEpNum) (PCD_GET_EP_TX_CNT(USBx, bEpNum))
+#define PCD_GET_EP_DBUF1_CNT(USBx, bEpNum) (PCD_GET_EP_RX_CNT(USBx, bEpNum))
+
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup PCD_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeInit (PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
+
+/**
+ * @}
+ */
+
+/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+/* I/O operation functions *****************************************************/
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
+
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
+
+/**
+ * @}
+ */
+
+/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+/* Peripheral Control functions ************************************************/
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_ActiveRemoteWakeup(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeActiveRemoteWakeup(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/** @addtogroup PCDEx_Private_Functions PCD Extended Private Functions
+ * @{
+ */
+void PCD_WritePMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
+void PCD_ReadPMA(USB_TypeDef *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F302x8 || */
+ /* STM32F373xC */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_PCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_pcd_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,154 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_pcd_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of PCD HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_PCD_EX_H
+#define __STM32F3xx_HAL_PCD_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F302x8) || \
+ defined(STM32F373xC)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCDEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup PCDEx_Exported_Macros PCD Extended Exported Macros
+ * @{
+ */
+/**
+ * @brief Gets address in an endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F373xC)
+
+#define PCD_EP_TX_ADDRESS(USBx, bEpNum) ((uint32_t *)((USBx->BTABLE+bEpNum*8)*2+ ((uint32_t)USBx + 0x400)))
+#define PCD_EP_TX_CNT(USBx, bEpNum) ((uint32_t *)((USBx->BTABLE+bEpNum*8+2)*2+ ((uint32_t)USBx + 0x400)))
+#define PCD_EP_RX_ADDRESS(USBx, bEpNum) ((uint32_t *)((USBx->BTABLE+bEpNum*8+4)*2+ ((uint32_t)USBx + 0x400)))
+#define PCD_EP_RX_CNT(USBx, bEpNum) ((uint32_t *)((USBx->BTABLE+bEpNum*8+6)*2+ ((uint32_t)USBx + 0x400)))
+
+#define PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount) {\
+ uint32_t *pdwReg = PCD_EP_RX_CNT(USBx, bEpNum); \
+ PCD_SET_EP_CNT_RX_REG(pdwReg, wCount);\
+ }
+
+#endif /* STM32F302xC || STM32F303xC || */
+ /* STM32F373xC */
+
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302x8)
+
+#define PCD_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t *)((USBx->BTABLE+bEpNum*8)+ ((uint32_t)USBx + 0x400)))
+#define PCD_EP_TX_CNT(USBx, bEpNum) ((uint16_t *)((USBx->BTABLE+bEpNum*8+2)+ ((uint32_t)USBx + 0x400)))
+#define PCD_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t *)((USBx->BTABLE+bEpNum*8+4)+ ((uint32_t)USBx + 0x400)))
+#define PCD_EP_RX_CNT(USBx, bEpNum) ((uint16_t *)((USBx->BTABLE+bEpNum*8+6)+ ((uint32_t)USBx + 0x400)))
+
+#define PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount) {\
+ uint16_t *pdwReg = PCD_EP_RX_CNT(USBx, bEpNum); \
+ PCD_SET_EP_CNT_RX_REG(pdwReg, wCount);\
+ }
+
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302x8 */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCDEx_Exported_Functions PCD Extended Exported Functions
+ * @{
+ */
+/** @addtogroup PCDEx_Exported_Functions_Group1 Extended Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd,
+ uint16_t ep_addr,
+ uint16_t ep_kind,
+ uint32_t pmaadress);
+
+ __weak void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F302x8 || */
+ /* STM32F373xC */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_PCD_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_pwr.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,258 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_pwr.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of PWR HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_PWR_H
+#define __STM32F3xx_HAL_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWR PWR HAL Driver module
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWR_Alias_Exported_Constants PWR Alias Exported Constants
+ * @{
+ */
+/* ------------- PWR registers bit address in the alias region ---------------*/
+#define PWR_OFFSET (PWR_BASE - PERIPH_BASE)
+
+/* --- CR Register ---*/
+#define CR_OFFSET (PWR_OFFSET + 0x00)
+/* Alias word address of DBP bit */
+#define DBP_BitNumber POSITION_VAL(PWR_CR_DBP)
+#define CR_DBP_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (DBP_BitNumber * 4))
+
+/* Alias word address of PVDE bit */
+#define PVDE_BitNumber POSITION_VAL(PWR_CR_PVDE)
+#define CR_PVDE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PVDE_BitNumber * 4))
+
+/* --- CSR Register ---*/
+#define CSR_OFFSET (PWR_OFFSET + 0x04)
+/* Alias word address of EWUP1 bit */
+#define EWUP1_BitNumber POSITION_VAL(PWR_CSR_EWUP1)
+#define CSR_EWUP1_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP1_BitNumber * 4))
+
+/* Alias word address of EWUP2 bit */
+#define EWUP2_BitNumber POSITION_VAL(PWR_CSR_EWUP2)
+#define CSR_EWUP2_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP2_BitNumber * 4))
+
+/* Alias word address of EWUP3 bit */
+#define EWUP3_BitNumber POSITION_VAL(PWR_CSR_EWUP3)
+#define CSR_EWUP3_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP3_BitNumber * 4))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Exported_Constants PWR Exported Constants
+ * @{
+ */
+
+/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins
+ * @{
+ */
+
+#define PWR_WAKEUP_PIN1 ((uint32_t)0x00)
+#define PWR_WAKEUP_PIN2 ((uint32_t)0x01)
+#define PWR_WAKEUP_PIN3 ((uint32_t)0x02)
+#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \
+ ((PIN) == PWR_WAKEUP_PIN2) || \
+ ((PIN) == PWR_WAKEUP_PIN3))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in STOP mode
+ * @{
+ */
+#define PWR_MAINREGULATOR_ON ((uint32_t)0x00000000)
+#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS
+
+#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
+ ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
+ * @{
+ */
+#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01)
+#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02)
+#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
+ * @{
+ */
+#define PWR_STOPENTRY_WFI ((uint8_t)0x01)
+#define PWR_STOPENTRY_WFE ((uint8_t)0x02)
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_Flag PWR Flag
+ * @{
+ */
+#define PWR_FLAG_WU PWR_CSR_WUF
+#define PWR_FLAG_SB PWR_CSR_SBF
+#define PWR_FLAG_PVDO PWR_CSR_PVDO
+#define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF
+#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \
+ ((FLAG) == PWR_FLAG_PVDO) || ((FLAG) == PWR_FLAG_VREFINTRDY))
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWR_Exported_Macro PWR Exported Macro
+ * @{
+ */
+
+/** @brief Check PWR flag is set or not.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
+ * was received from the WKUP pin or from the RTC alarm (Alarm A
+ * or Alarm B), RTC Tamper event, RTC TimeStamp event or RTC Wakeup.
+ * An additional wakeup event is detected if the WKUP pin is enabled
+ * (by setting the EWUP bit) when the WKUP pin level is already high.
+ * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
+ * resumed from StandBy mode.
+ * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
+ * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
+ * For this reason, this bit is equal to 0 after Standby or reset
+ * until the PVDE bit is set.
+ * @arg PWR_FLAG_VREFINTRDY: This flag indicates that the internal reference
+ * voltage VREFINT is ready.
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the PWR's pending flags.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg PWR_FLAG_WU: Wake Up flag
+ * @arg PWR_FLAG_SB: StandBy flag
+ */
+#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2)
+
+/**
+ * @}
+ */
+
+/* Include PWR HAL Extended module */
+#include "stm32f3xx_hal_pwr_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup PWR_Exported_Functions PWR Exported Functions
+ * @{
+ */
+
+/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions *****************************/
+void HAL_PWR_DeInit(void);
+
+/**
+ * @}
+ */
+
+/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions
+ * @{
+ */
+
+/* Peripheral Control functions **********************************************/
+void HAL_PWR_EnableBkUpAccess(void);
+void HAL_PWR_DisableBkUpAccess(void);
+
+/* WakeUp pins configuration functions ****************************************/
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
+
+/* Low Power modes configuration functions ************************************/
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
+void HAL_PWR_EnterSTANDBYMode(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_pwr_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,299 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_pwr_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of PWR HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_PWR_EX_H
+#define __STM32F3xx_HAL_PWR_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PWREx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup PWREx_Exported_Types PWR Extended Exported Types
+ * @{
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || \
+ defined(STM32F373xC)
+/**
+ * @brief PWR PVD configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level
+ This parameter can be a value of @ref PWREx_PVD_detection_level */
+
+ uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins.
+ This parameter can be a value of @ref PWREx_PVD_Mode */
+}PWR_PVDTypeDef;
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F303x8 || STM32F334x8 || */
+ /* STM32F301x8 || STM32F302x8 || */
+ /* STM32F373xC */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Constants PWR Extended Exported Constants
+ * @{
+ */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || \
+ defined(STM32F373xC)
+
+/** @defgroup PWREx_PVD_detection_level PWR Extended PVD detection level
+ * @{
+ */
+#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0
+#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1
+#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2
+#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3
+#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4
+#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5
+#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6
+#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
+ ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
+ ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
+ ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
+/**
+ * @}
+ */
+
+/** @defgroup PWREx_PVD_Mode PWR Extended PVD Mode
+ * @{
+ */
+#define PWR_PVD_MODE_NORMAL ((uint32_t)0x00000000) /*!< basic mode is used */
+#define PWR_PVD_MODE_IT_RISING ((uint32_t)0x00010001) /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_IT_FALLING ((uint32_t)0x00010002) /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_IT_RISING_FALLING ((uint32_t)0x00010003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING ((uint32_t)0x00020001) /*!< Event Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_EVENT_FALLING ((uint32_t)0x00020002) /*!< Event Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003) /*!< Event Mode with Rising/Falling edge trigger detection */
+
+#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \
+ ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \
+ ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \
+ ((MODE) == PWR_PVD_MODE_NORMAL))
+/**
+ * @}
+ */
+
+#define PWR_EXTI_LINE_PVD ((uint32_t)0x00010000) /*!< External interrupt line 16 Connected to the PVD EXTI Line */
+
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F303x8 || STM32F334x8 || */
+ /* STM32F301x8 || STM32F302x8 || */
+ /* STM32F373xC */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup PWREx_SDADC_ANALOGx PWR Extended SDADC ANALOGx
+ * @{
+ */
+#define PWR_SDADC_ANALOG1 ((uint32_t)PWR_CR_SDADC1EN)
+#define PWR_SDADC_ANALOG2 ((uint32_t)PWR_CR_SDADC2EN)
+#define PWR_SDADC_ANALOG3 ((uint32_t)PWR_CR_SDADC3EN)
+#define IS_PWR_SDADC_ANALOG(SDADC) (((SDADC) == PWR_SDADC_ANALOG1) || \
+ ((SDADC) == PWR_SDADC_ANALOG2) || \
+ ((SDADC) == PWR_SDADC_ANALOG3))
+/**
+ * @}
+ */
+#endif /* STM32F373xC || STM32F378xx */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWREx_Exported_Macros PWR Extended Exported Macros
+ * @{
+ */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || \
+ defined(STM32F373xC)
+
+/**
+ * @brief Enable interrupt on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Disable interrupt on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Generate a Software interrupt on selected EXTI line.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Enable event on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Disable event on PVD Exti Line 16.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief PVD EXTI line configuration: clear falling edge trigger and set rising edge.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() EXTI->FTSR &= ~(PWR_EXTI_LINE_PVD); \
+ EXTI->RTSR &= ~(PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief PVD EXTI line configuration: set falling edge trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER() EXTI->FTSR |= (PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief PVD EXTI line configuration: set rising edge trigger.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER() EXTI->RTSR |= (PWR_EXTI_LINE_PVD)
+
+/**
+ * @brief Check whether the specified PVD EXTI interrupt flag is set or not.
+ * @retval EXTI PVD Line Status.
+ */
+#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD))
+
+/**
+ * @brief Clear the PVD EXTI flag.
+ * @retval None.
+ */
+#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD))
+
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F303x8 || STM32F334x8 || */
+ /* STM32F301x8 || STM32F302x8 || */
+ /* STM32F373xC */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup PWREx_Exported_Functions PWR Extended Exported Functions
+ * @{
+ */
+
+/** @addtogroup PWREx_Exported_Functions_Group1 Peripheral Extended Control Functions
+ * @{
+ */
+/* Peripheral Extended control functions **************************************/
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || \
+ defined(STM32F373xC)
+void HAL_PWR_PVDConfig(PWR_PVDTypeDef *sConfigPVD);
+void HAL_PWR_EnablePVD(void);
+void HAL_PWR_DisablePVD(void);
+void HAL_PWR_PVD_IRQHandler(void);
+void HAL_PWR_PVDCallback(void);
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F303x8 || STM32F334x8 || */
+ /* STM32F301x8 || STM32F302x8 || */
+ /* STM32F373xC */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+void HAL_PWREx_EnableSDADCAnalog(uint32_t Analogx);
+void HAL_PWREx_DisableSDADCAnalog(uint32_t Analogx);
+#endif /* STM32F373xC || STM32F378xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_PWR_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_rcc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1102 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_rcc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of RCC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_RCC_H
+#define __STM32F3xx_HAL_RCC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RCC_Exported_Types RCC Exported Types
+ * @{
+ */
+
+/**
+ * @brief RCC System, AHB and APB busses clock configuration structure definition
+ */
+typedef struct
+{
+ uint32_t ClockType; /*!< The clock to be configured.
+ This parameter can be a value of @ref RCC_System_Clock_Type */
+
+ uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock.
+ This parameter can be a value of @ref RCC_System_Clock_Source */
+
+ uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK).
+ This parameter can be a value of @ref RCC_AHB_Clock_Source */
+
+ uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
+
+ uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK).
+ This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */
+
+}RCC_ClkInitTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCC_Exported_Constants RCC Exported Constants
+ * @{
+ */
+
+/** @defgroup RCC_BitAddress_AliasRegion RCC BitAddress AliasRegion
+ * @brief RCC registers bit address in the alias region
+ * @{
+ */
+#define RCC_OFFSET (RCC_BASE - PERIPH_BASE)
+/* --- CR Register ---*/
+#define RCC_CR_OFFSET (RCC_OFFSET + 0x00)
+/* Alias word address of HSION bit */
+#define HSION_BitNumber 0
+#define CR_HSION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (HSION_BitNumber * 4))
+/* Alias word address of HSEON bit */
+#define HSEON_BitNumber 16
+#define CR_HSEON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (HSEON_BitNumber * 4))
+/* Alias word address of CSSON bit */
+#define CSSON_BitNumber 19
+#define CR_CSSON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (CSSON_BitNumber * 4))
+/* Alias word address of PLLON bit */
+#define PLLON_BitNumber 24
+#define CR_PLLON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (PLLON_BitNumber * 4))
+
+/* --- CFGR Register ---*/
+#define RCC_CFGR_OFFSET (RCC_OFFSET + 0x04)
+/* Alias word address of PLLSRC bit */
+#define PLLSRC_BitNumber 16
+#define CFGR_PLLSRC_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32) + (PLLSRC_BitNumber * 4))
+
+/* --- CIR Register ---*/
+#define RCC_CIR_OFFSET (RCC_OFFSET + 0x08)
+
+/* --- BDCR Register ---*/
+#define RCC_BDCR_OFFSET (RCC_OFFSET + 0x20)
+/* Alias word address of LSEON bit */
+#define LSEON_BitNumber 0
+#define BDCR_LSEON_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32) + (LSEON_BitNumber * 4))
+/* Alias word address of RTCEN bit */
+#define RTCEN_BitNumber 15
+#define BDCR_RTCEN_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32) + (RTCEN_BitNumber * 4))
+/* Alias word address of BDRST bit */
+#define BDRST_BitNumber 16
+#define BDCR_BDRST_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32) + (BDRST_BitNumber * 4))
+
+/* --- CSR Register ---*/
+#define RCC_CSR_OFFSET (RCC_OFFSET + 0x24)
+/* Alias word address of LSION bit */
+#define LSION_BitNumber 0
+#define CSR_LSION_BB (PERIPH_BB_BASE + (RCC_CSR_OFFSET * 32) + (LSION_BitNumber * 4))
+/* Alias word address of RMVF bit */
+#define RMVF_BitNumber 24
+#define CSR_RMVF_BB (PERIPH_BB_BASE + (RCC_CSR_OFFSET * 32) + (RMVF_BitNumber * 4))
+
+/* CR register byte 2 (Bits[23:16]) base address */
+#define CR_BYTE2_ADDRESS (PERIPH_BASE + RCC_CR_OFFSET + 0x02)
+
+/* CIR register byte 1 (Bits[15:8]) base address */
+#define CIR_BYTE1_ADDRESS (PERIPH_BASE + RCC_CIR_OFFSET + 0x01)
+
+/* CIR register byte 2 (Bits[23:16]) base address */
+#define CIR_BYTE2_ADDRESS (PERIPH_BASE + RCC_CIR_OFFSET + 0x02)
+
+/* CSR register byte 1 (Bits[15:8]) base address */
+#define CSR_BYTE1_ADDRESS (PERIPH_BASE + RCC_CSR_OFFSET + 0x01)
+
+/* BDCR register byte 0 (Bits[7:0] base address */
+#define BDCR_BYTE0_ADDRESS (PERIPH_BASE + RCC_BDCR_OFFSET)
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Timeout RCC Timeout
+ * @{
+ */
+/* LSE state change timeout */
+#define LSE_TIMEOUT_VALUE ((uint32_t)5000) /* 5 s */
+
+/* Disable Backup domain write protection state change timeout */
+#define DBP_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Oscillator_Type RCC Oscillator Type
+ * @{
+ */
+#define RCC_OSCILLATORTYPE_NONE ((uint32_t)0x00000000)
+#define RCC_OSCILLATORTYPE_HSE ((uint32_t)0x00000001)
+#define RCC_OSCILLATORTYPE_HSI ((uint32_t)0x00000002)
+#define RCC_OSCILLATORTYPE_LSE ((uint32_t)0x00000004)
+#define RCC_OSCILLATORTYPE_LSI ((uint32_t)0x00000008)
+
+#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) (((OSCILLATOR) == RCC_OSCILLATORTYPE_NONE) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI) || \
+ (((OSCILLATOR) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSE_Config RCC HSE Config
+ * @{
+ */
+#define RCC_HSE_OFF ((uint32_t)0x00000000)
+#define RCC_HSE_ON ((uint32_t)0x00000001)
+#define RCC_HSE_BYPASS ((uint32_t)0x00000005)
+
+#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \
+ ((HSE) == RCC_HSE_BYPASS))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSE_Config RCC_LSE_Config
+ * @{
+ */
+#define RCC_LSE_OFF ((uint32_t)0x00000000)
+#define RCC_LSE_ON ((uint32_t)0x00000001)
+#define RCC_LSE_BYPASS ((uint32_t)0x00000005)
+
+#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \
+ ((LSE) == RCC_LSE_BYPASS))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI_Config RCC HSI Config
+ * @{
+ */
+#define RCC_HSI_OFF ((uint32_t)0x00000000)
+#define RCC_HSI_ON ((uint32_t)0x00000001)
+
+#define IS_RCC_HSI(HSI) (((HSI) == RCC_HSI_OFF) || ((HSI) == RCC_HSI_ON))
+
+#define RCC_HSICALIBRATION_DEFAULT ((uint32_t)0x10) /* Default HSI calibration trimming value */
+
+#define IS_RCC_CALIBRATION_VALUE(__VALUE__) ((__VALUE__) <= 0x1F)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSI_Config RCC LSI Config
+ * @{
+ */
+#define RCC_LSI_OFF ((uint32_t)0x00000000)
+#define RCC_LSI_ON ((uint32_t)0x00000001)
+
+#define IS_RCC_LSI(LSI) (((LSI) == RCC_LSI_OFF) || ((LSI) == RCC_LSI_ON))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Config RCC PLL Config
+ * @{
+ */
+#define RCC_PLL_NONE ((uint32_t)0x00000000)
+#define RCC_PLL_OFF ((uint32_t)0x00000001)
+#define RCC_PLL_ON ((uint32_t)0x00000002)
+
+#define IS_RCC_PLL(PLL) (((PLL) == RCC_PLL_NONE) ||((PLL) == RCC_PLL_OFF) || ((PLL) == RCC_PLL_ON))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Multiplication_Factor RCC PLL Multiplication Factor
+ * @{
+ */
+#define RCC_PLL_MUL2 RCC_CFGR_PLLMUL2
+#define RCC_PLL_MUL3 RCC_CFGR_PLLMUL3
+#define RCC_PLL_MUL4 RCC_CFGR_PLLMUL4
+#define RCC_PLL_MUL5 RCC_CFGR_PLLMUL5
+#define RCC_PLL_MUL6 RCC_CFGR_PLLMUL6
+#define RCC_PLL_MUL7 RCC_CFGR_PLLMUL7
+#define RCC_PLL_MUL8 RCC_CFGR_PLLMUL8
+#define RCC_PLL_MUL9 RCC_CFGR_PLLMUL9
+#define RCC_PLL_MUL10 RCC_CFGR_PLLMUL10
+#define RCC_PLL_MUL11 RCC_CFGR_PLLMUL11
+#define RCC_PLL_MUL12 RCC_CFGR_PLLMUL12
+#define RCC_PLL_MUL13 RCC_CFGR_PLLMUL13
+#define RCC_PLL_MUL14 RCC_CFGR_PLLMUL14
+#define RCC_PLL_MUL15 RCC_CFGR_PLLMUL15
+#define RCC_PLL_MUL16 RCC_CFGR_PLLMUL16
+
+#define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLL_MUL2) || ((MUL) == RCC_PLL_MUL3) || \
+ ((MUL) == RCC_PLL_MUL4) || ((MUL) == RCC_PLL_MUL5) || \
+ ((MUL) == RCC_PLL_MUL6) || ((MUL) == RCC_PLL_MUL7) || \
+ ((MUL) == RCC_PLL_MUL8) || ((MUL) == RCC_PLL_MUL9) || \
+ ((MUL) == RCC_PLL_MUL10) || ((MUL) == RCC_PLL_MUL11) || \
+ ((MUL) == RCC_PLL_MUL12) || ((MUL) == RCC_PLL_MUL13) || \
+ ((MUL) == RCC_PLL_MUL14) || ((MUL) == RCC_PLL_MUL15) || \
+ ((MUL) == RCC_PLL_MUL16))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Type RCC System Clock Type
+ * @{
+ */
+#define RCC_CLOCKTYPE_SYSCLK ((uint32_t)0x00000001)
+#define RCC_CLOCKTYPE_HCLK ((uint32_t)0x00000002)
+#define RCC_CLOCKTYPE_PCLK1 ((uint32_t)0x00000004)
+#define RCC_CLOCKTYPE_PCLK2 ((uint32_t)0x00000008)
+
+#define IS_RCC_CLOCKTYPE(CLK) ((((CLK) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK) || \
+ (((CLK) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK) || \
+ (((CLK) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1) || \
+ (((CLK) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Source RCC System Clock Source
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI
+#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE
+#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL
+
+#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_System_Clock_Source_Status RCC System Clock Source Status
+ * @{
+ */
+#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI
+#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE
+#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL
+
+#define IS_RCC_SYSCLKSOURCE_STATUS(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSI) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_HSE) || \
+ ((SOURCE) == RCC_SYSCLKSOURCE_STATUS_PLLCLK)))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB_Clock_Source RCC AHB Clock Source
+ * @{
+ */
+#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1
+#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2
+#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4
+#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8
+#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16
+#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64
+#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128
+#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256
+#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512
+
+#define IS_RCC_SYSCLK_DIV(DIV) (((DIV) == RCC_SYSCLK_DIV1) || ((DIV) == RCC_SYSCLK_DIV2) || \
+ ((DIV) == RCC_SYSCLK_DIV4) || ((DIV) == RCC_SYSCLK_DIV8) || \
+ ((DIV) == RCC_SYSCLK_DIV16) || ((DIV) == RCC_SYSCLK_DIV64) || \
+ ((DIV) == RCC_SYSCLK_DIV128) || ((DIV) == RCC_SYSCLK_DIV256) || \
+ ((DIV) == RCC_SYSCLK_DIV512))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_APB2_Clock_Source RCC APB1 APB2 Clock Source
+ * @{
+ */
+#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1
+#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2
+#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4
+#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8
+#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16
+
+#define IS_RCC_HCLK_DIV(DIV) (((DIV) == RCC_HCLK_DIV1) || ((DIV) == RCC_HCLK_DIV2) || \
+ ((DIV) == RCC_HCLK_DIV4) || ((DIV) == RCC_HCLK_DIV8) || \
+ ((DIV) == RCC_HCLK_DIV16))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_RTC_Clock_Source RCC RTC Clock Source
+ * @{
+ */
+#define RCC_RTCCLKSOURCE_NONE RCC_BDCR_RTCSEL_NOCLOCK
+#define RCC_RTCCLKSOURCE_LSE RCC_BDCR_RTCSEL_LSE
+#define RCC_RTCCLKSOURCE_LSI RCC_BDCR_RTCSEL_LSI
+#define RCC_RTCCLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL_HSE
+
+#define IS_RCC_RTCCLKSOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSOURCE_NONE) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_LSI) || \
+ ((SOURCE) == RCC_RTCCLKSOURCE_HSE_DIV32))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_USART2_Clock_Source RCC USART2 Clock Source
+ * @{
+ */
+#define RCC_USART2CLKSOURCE_PCLK1 RCC_CFGR3_USART2SW_PCLK
+#define RCC_USART2CLKSOURCE_SYSCLK RCC_CFGR3_USART2SW_SYSCLK
+#define RCC_USART2CLKSOURCE_LSE RCC_CFGR3_USART2SW_LSE
+#define RCC_USART2CLKSOURCE_HSI RCC_CFGR3_USART2SW_HSI
+
+#define IS_RCC_USART2CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART2CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_USART2CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART2CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART2CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_USART3_Clock_Source RCC USART3 Clock Source
+ * @{
+ */
+#define RCC_USART3CLKSOURCE_PCLK1 RCC_CFGR3_USART3SW_PCLK
+#define RCC_USART3CLKSOURCE_SYSCLK RCC_CFGR3_USART3SW_SYSCLK
+#define RCC_USART3CLKSOURCE_LSE RCC_CFGR3_USART3SW_LSE
+#define RCC_USART3CLKSOURCE_HSI RCC_CFGR3_USART3SW_HSI
+
+#define IS_RCC_USART3CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART3CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_USART3CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART3CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART3CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_I2C1_Clock_Source RCC I2C1 Clock Source
+ * @{
+ */
+#define RCC_I2C1CLKSOURCE_HSI RCC_CFGR3_I2C1SW_HSI
+#define RCC_I2C1CLKSOURCE_SYSCLK RCC_CFGR3_I2C1SW_SYSCLK
+
+#define IS_RCC_I2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C1CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C1CLKSOURCE_SYSCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_MCOx_Index RCC MCOx Index
+ * @{
+ */
+#define RCC_MCO ((uint32_t)0x00000000)
+
+#define IS_RCC_MCO(MCOx) ((MCOx) == RCC_MCO)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Interrupt RCC Interrupt
+ * @{
+ */
+#define RCC_IT_LSIRDY ((uint32_t)0x00000001)
+#define RCC_IT_LSERDY ((uint32_t)0x00000002)
+#define RCC_IT_HSIRDY ((uint32_t)0x00000004)
+#define RCC_IT_HSERDY ((uint32_t)0x00000008)
+#define RCC_IT_PLLRDY ((uint32_t)0x00000010)
+#define RCC_IT_CSS ((uint32_t)0x00000080)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flag RCC Flag
+ * Elements values convention: 0XXYYYYYb
+ * - YYYYY : Flag position in the register
+ * - XX : Register index
+ * - 01: CR register
+ * - 10: BDCR register
+ * - 11: CSR register
+ * @{
+ */
+#define CR_REG_INDEX 1U
+#define BDCR_REG_INDEX 2U
+#define CSR_REG_INDEX 3U
+
+/* Flags in the CR register */
+#define RCC_FLAG_HSIRDY ((uint32_t)((CR_REG_INDEX << 5U) | (uint32_t)(POSITION_VAL(RCC_CR_HSIRDY))))
+#define RCC_FLAG_HSERDY ((uint32_t)((CR_REG_INDEX << 5U) | (uint32_t)(POSITION_VAL(RCC_CR_HSERDY))))
+#define RCC_FLAG_PLLRDY ((uint32_t)((CR_REG_INDEX << 5U) | (uint32_t)(POSITION_VAL(RCC_CR_PLLRDY))))
+
+/* Flags in the BDCR register */
+#define RCC_FLAG_LSERDY ((uint32_t)((BDCR_REG_INDEX << 5U) | (uint32_t)(POSITION_VAL(RCC_BDCR_LSERDY))))
+
+/* Flags in the CSR register */
+#define RCC_FLAG_LSIRDY ((uint32_t)((CSR_REG_INDEX << 5U) | (uint32_t)(POSITION_VAL(RCC_CSR_LSIRDY))))
+#define RCC_FLAG_RMV ((uint32_t)((CSR_REG_INDEX << 5U) | (uint32_t)(POSITION_VAL(RCC_CSR_RMVF))))
+#define RCC_FLAG_OBLRST ((uint32_t)((CSR_REG_INDEX << 5U) | (uint32_t)(POSITION_VAL(RCC_CSR_OBLRSTF))))
+#define RCC_FLAG_PINRST ((uint32_t)((CSR_REG_INDEX << 5U) | (uint32_t)(POSITION_VAL(RCC_CSR_PINRSTF))))
+#define RCC_FLAG_PORRST ((uint32_t)((CSR_REG_INDEX << 5U) | (uint32_t)(POSITION_VAL(RCC_CSR_PORRSTF))))
+#define RCC_FLAG_SFTRST ((uint32_t)((CSR_REG_INDEX << 5U) | (uint32_t)(POSITION_VAL(RCC_CSR_SFTRSTF))))
+#define RCC_FLAG_IWDGRST ((uint32_t)((CSR_REG_INDEX << 5U) | (uint32_t)(POSITION_VAL(RCC_CSR_IWDGRSTF))))
+#define RCC_FLAG_WWDGRST ((uint32_t)((CSR_REG_INDEX << 5U) | (uint32_t)(POSITION_VAL(RCC_CSR_WWDGRSTF))))
+#define RCC_FLAG_LPWRRST ((uint32_t)((CSR_REG_INDEX << 5U) | (uint32_t)(POSITION_VAL(RCC_CSR_LPWRRSTF))))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup RCC_Exported_Macros RCC Exported Macros
+ * @{
+ */
+
+/** @defgroup RCC_AHB_Clock_Enable_Disable RCC AHB Clock Enable Disable
+ * @brief Enable or disable the AHB peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __GPIOA_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOAEN))
+#define __GPIOB_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOBEN))
+#define __GPIOC_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOCEN))
+#define __GPIOD_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIODEN))
+#define __GPIOF_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOFEN))
+#define __CRC_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_CRCEN))
+#define __DMA1_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_DMA1EN))
+#define __SRAM_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_SRAMEN))
+#define __FLITF_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_FLITFEN))
+#define __TSC_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_TSCEN))
+
+#define __GPIOA_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOAEN))
+#define __GPIOB_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOBEN))
+#define __GPIOC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOCEN))
+#define __GPIOD_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIODEN))
+#define __GPIOF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOFEN))
+#define __CRC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_CRCEN))
+#define __DMA1_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA1EN))
+#define __SRAM_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_SRAMEN))
+#define __FLITF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FLITFEN))
+#define __TSC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_TSCEN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Clock_Enable_Disable RCC APB1 Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __TIM2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM2EN))
+#define __TIM6_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM6EN))
+#define __WWDG_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_WWDGEN))
+#define __USART2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART2EN))
+#define __USART3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USART3EN))
+#define __I2C1_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C1EN))
+#define __PWR_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_PWREN))
+#define __DAC1_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_DAC1EN))
+
+#define __TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN))
+#define __TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN))
+#define __WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
+#define __USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN))
+#define __USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN))
+#define __I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN))
+#define __PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN))
+#define __DAC1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DAC1EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Clock_Enable_Disable RCC APB2 Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#define __SYSCFG_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SYSCFGEN))
+#define __TIM15_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM15EN))
+#define __TIM16_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM16EN))
+#define __TIM17_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM17EN))
+#define __USART1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_USART1EN))
+
+#define __SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN))
+#define __TIM15_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM15EN))
+#define __TIM16_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM16EN))
+#define __TIM17_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM17EN))
+#define __USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_AHB_Force_Release_Reset RCC AHB Force Release Reset
+ * @brief Force or release AHB peripheral reset.
+ * @{
+ */
+#define __AHB_FORCE_RESET() (RCC->AHBRSTR = 0xFFFFFFFF)
+#define __GPIOA_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOARST))
+#define __GPIOB_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOBRST))
+#define __GPIOC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOCRST))
+#define __GPIOD_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIODRST))
+#define __GPIOF_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOFRST))
+#define __TSC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_TSCRST))
+
+#define __AHB_RELEASE_RESET() (RCC->AHBRSTR = 0x00)
+#define __GPIOA_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOARST))
+#define __GPIOB_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOBRST))
+#define __GPIOC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOCRST))
+#define __GPIOD_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIODRST))
+#define __GPIOF_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOFRST))
+#define __TSC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_TSCRST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB1_Force_Release_Reset RCC APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#define __APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFF)
+#define __TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST))
+#define __TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST))
+#define __WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST))
+#define __USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST))
+#define __USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST))
+#define __I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST))
+#define __PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST))
+#define __DAC1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DAC1RST))
+
+#define __APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00)
+#define __TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST))
+#define __TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST))
+#define __WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST))
+#define __USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST))
+#define __USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST))
+#define __I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST))
+#define __PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST))
+#define __DAC1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DAC1RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Force_Release_Reset RCC APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#define __APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFF)
+#define __SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST))
+#define __TIM15_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM15RST))
+#define __TIM16_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM16RST))
+#define __TIM17_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM17RST))
+#define __USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST))
+
+#define __APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00)
+#define __SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST))
+#define __TIM15_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM15RST))
+#define __TIM16_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM16RST))
+#define __TIM17_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM17RST))
+#define __USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSI_Configuration RCC HSI Configuration
+ * @{
+ */
+
+/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI).
+ * @note The HSI is stopped by hardware when entering STOP and STANDBY modes.
+ * It is used (enabled by hardware) as system clock source after startup
+ * from Reset, wakeup from STOP and STANDBY mode, or in case of failure
+ * of the HSE used directly or indirectly as system clock (if the Clock
+ * Security System CSS is enabled).
+ * @note HSI can not be stopped if it is used as system clock source. In this case,
+ * you have to select another source of the system clock then stop the HSI.
+ * @note After enabling the HSI, the application software should wait on HSIRDY
+ * flag to be set indicating that HSI clock is stable and can be used as
+ * system clock source.
+ * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_HSI_ENABLE() (*(__IO uint32_t *)CR_HSION_BB = ENABLE)
+#define __HAL_RCC_HSI_DISABLE() (*(__IO uint32_t *)CR_HSION_BB = DISABLE)
+
+
+/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
+ * @note The calibration is used to compensate for the variations in voltage
+ * and temperature that influence the frequency of the internal HSI RC.
+ * @param __HSICalibrationValue__: specifies the calibration trimming value.
+ * This parameter must be a number between 0 and 0x1F.
+ */
+#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) \
+ MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, (uint32_t)(__HSICalibrationValue__) << POSITION_VAL(RCC_CR_HSITRIM))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LSI_Configuration RCC LSI Configuration
+ * @{
+ */
+
+/** @brief Macro to enable or disable the Internal Low Speed oscillator (LSI).
+ * @note After enabling the LSI, the application software should wait on
+ * LSIRDY flag to be set indicating that LSI clock is stable and can
+ * be used to clock the IWDG and/or the RTC.
+ * @note LSI can not be disabled if the IWDG is running.
+ * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator
+ * clock cycles.
+ */
+#define __HAL_RCC_LSI_ENABLE() (*(__IO uint32_t *)CSR_LSION_BB = ENABLE)
+#define __HAL_RCC_LSI_DISABLE() (*(__IO uint32_t *)CSR_LSION_BB = DISABLE)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_HSE_Configuration RCC HSE Configuration
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the External High Speed oscillator (HSE).
+ * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application
+ * software should wait on HSERDY flag to be set indicating that HSE clock
+ * is stable and can be used to clock the PLL and/or system clock.
+ * @note HSE state can not be changed if it is used directly or through the
+ * PLL as system clock. In this case, you have to select another source
+ * of the system clock then change the HSE state (ex. disable it).
+ * @note The HSE is stopped by hardware when entering STOP and STANDBY modes.
+ * @note This function reset the CSSON bit, so if the Clock security system(CSS)
+ * was previously enabled you have to enable it again after calling this
+ * function.
+ * @param __STATE__: specifies the new state of the HSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after
+ * 6 HSE oscillator clock cycles.
+ * @arg RCC_HSE_ON: turn ON the HSE oscillator
+ * @arg RCC_HSE_BYPASS: HSE oscillator bypassed with external clock
+ */
+#define __HAL_RCC_HSE_CONFIG(__STATE__) (*(__IO uint8_t *)CR_BYTE2_ADDRESS = (__STATE__))
+ /**
+ * @}
+ */
+
+/** @defgroup RCC_LSE_Configuration RCC LSE Configuration
+ * @{
+ */
+/**
+ * @brief Macro to configure the External Low Speed oscillator (LSE).
+ * @note As the LSE is in the Backup domain and write access is denied to
+ * this domain after reset, you have to enable write access using
+ * HAL_PWR_EnableBkUpAccess() function before to configure the LSE
+ * (to be done once after reset).
+ * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application
+ * software should wait on LSERDY flag to be set indicating that LSE clock
+ * is stable and can be used to clock the RTC.
+ * @param __STATE__: specifies the new state of the LSE.
+ * This parameter can be one of the following values:
+ * @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after
+ * 6 LSE oscillator clock cycles.
+ * @arg RCC_LSE_ON: turn ON the LSE oscillator
+ * @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock
+ */
+#define __HAL_RCC_LSE_CONFIG(__STATE__) \
+ MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEON|RCC_BDCR_LSEBYP, (uint32_t)(__STATE__))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_I2Cx_Clock_Config RCC I2Cx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the I2C1 clock (I2C1CLK).
+ * @param __I2C1CLKSource__: specifies the I2C1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock
+ * @arg RCC_I2C1CLKSOURCE_SYSCLK: System Clock selected as I2C1 clock
+ */
+#define __HAL_RCC_I2C1_CONFIG(__I2C1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C1SW, (uint32_t)(__I2C1CLKSource__))
+
+/** @brief Macro to get the I2C1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2C1CLKSOURCE_HSI: HSI selected as I2C1 clock
+ * @arg RCC_I2C1CLKSOURCE_SYSCLK: System Clock selected as I2C1 clock
+ */
+#define __HAL_RCC_GET_I2C1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C1SW)))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_USARTx_Clock_Config RCC USARTx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the USART1 clock (USART1CLK).
+ * @param __USART1CLKSource__: specifies the USART1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USART1CLKSOURCE_PCLK2 or RCC_USART1CLKSOURCE_PCLK1: PCLK2 or PCLK1 selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_SYSCLK: System Clock selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock
+ */
+#define __HAL_RCC_USART1_CONFIG(__USART1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART1SW, (uint32_t)(__USART1CLKSource__))
+
+/** @brief Macro to get the USART1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USART1CLKSOURCE_PCLK2 or RCC_USART1CLKSOURCE_PCLK1: PCLK2 or PCLK1 selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_HSI: HSI selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_SYSCLK: System Clock selected as USART1 clock
+ * @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock
+ */
+#define __HAL_RCC_GET_USART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART1SW)))
+
+/** @brief Macro to configure the USART2 clock (USART2CLK).
+ * @param __USART2CLKSource__: specifies the USART2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
+ */
+#define __HAL_RCC_USART2_CONFIG(__USART2CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART2SW, (uint32_t)(__USART2CLKSource__))
+
+/** @brief Macro to get the USART2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USART2CLKSOURCE_PCLK1: PCLK1 selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_HSI: HSI selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_SYSCLK: System Clock selected as USART2 clock
+ * @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
+ */
+#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART2SW)))
+
+/** @brief Macro to configure the USART3 clock (USART3CLK).
+ * @param __USART3CLKSource__: specifies the USART3 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USART3CLKSOURCE_PCLK1: PCLK1 selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_HSI: HSI selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_SYSCLK: System Clock selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_LSE: LSE selected as USART3 clock
+ */
+#define __HAL_RCC_USART3_CONFIG(__USART3CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_USART3SW, (uint32_t)(__USART3CLKSource__))
+
+/** @brief Macro to get the USART3 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USART3CLKSOURCE_PCLK1: PCLK1 selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_HSI: HSI selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_SYSCLK: System Clock selected as USART3 clock
+ * @arg RCC_USART3CLKSOURCE_LSE: LSE selected as USART3 clock
+ */
+#define __HAL_RCC_GET_USART3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART3SW)))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration
+ * @{
+ */
+/** @brief Macros to enable or disable the the RTC clock.
+ * @note These macros must be used only after the RTC clock source was selected.
+ */
+#define __HAL_RCC_RTC_ENABLE() (*(__IO uint32_t *)BDCR_RTCEN_BB = ENABLE)
+#define __HAL_RCC_RTC_DISABLE() (*(__IO uint32_t *)BDCR_RTCEN_BB = DISABLE)
+
+/** @brief Macro to configure the RTC clock (RTCCLK).
+ * @note As the RTC clock configuration bits are in the Backup domain and write
+ * access is denied to this domain after reset, you have to enable write
+ * access using the Power Backup Access macro before to configure
+ * the RTC clock source (to be done once after reset).
+ * @note Once the RTC clock is configured it can't be changed unless the
+ * Backup domain is reset using __HAL_RCC_BackupReset_RELEASE() macro, or by
+ * a Power On Reset (POR).
+ * @param __RTCCLKSource__: specifies the RTC clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_RTCCLKSOURCE_NONE: No clock selected as RTC clock
+ * @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock
+ * @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock
+ * @arg RCC_RTCCLKSOURCE_HSE_DIV32: HSE clock divided by 32
+ *
+ * @note If the LSE is used as RTC clock source, the RTC continues to
+ * work in STOP and STANDBY modes, and can be used as wakeup source.
+ * However, when the LSI clock and HSE clock divided by 32 is used as RTC clock source,
+ * the RTC cannot be used in STOP and STANDBY modes.
+ * @note The system must always be configured so as to get a PCLK frequency greater than or
+ * equal to the RTCCLK frequency for a proper operation of the RTC.
+ */
+#define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) \
+ MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, (uint32_t)(__RTCCLKSource__))
+
+/** @brief Macro to get the RTC clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_RTCCLKSOURCE_NONE: No clock selected as RTC clock
+ * @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock
+ * @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock
+ * @arg RCC_RTCCLKSOURCE_HSE_DIV32: HSE clock divided by 32 selected as RTC clock
+ */
+#define __HAL_RCC_GET_RTC_SOURCE() ((uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Force_Release_Backup RCC Force Release Backup
+ * @{
+ */
+
+/** @brief Macro to force or release the Backup domain reset.
+ * @note These macros reset the RTC peripheral (including the backup registers)
+ * and the RTC clock source selection in RCC_CSR register.
+ * @note The BKPSRAM is not affected by this reset.
+ */
+#define __HAL_RCC_BACKUPRESET_FORCE() (*(__IO uint32_t *)BDCR_BDRST_BB = ENABLE)
+#define __HAL_RCC_BACKUPRESET_RELEASE() (*(__IO uint32_t *)BDCR_BDRST_BB = DISABLE)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_PLL_Configuration RCC PLL Configuration
+ * @{
+ */
+
+/** @brief Macro to enable or disable the PLL.
+ * @note After enabling the PLL, the application software should wait on
+ * PLLRDY flag to be set indicating that PLL clock is stable and can
+ * be used as system clock source.
+ * @note The PLL can not be disabled if it is used as system clock source
+ * @note The PLL is disabled by hardware when entering STOP and STANDBY modes.
+ */
+#define __HAL_RCC_PLL_ENABLE() (*(__IO uint32_t *)CR_PLLON_BB = ENABLE)
+#define __HAL_RCC_PLL_DISABLE() (*(__IO uint32_t *)CR_PLLON_BB = DISABLE)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Get_Clock_source RCC Get Clock source
+ * @{
+ */
+
+/** @brief Macro to get the clock source used as system clock.
+ * @retval The clock source used as system clock.
+ * The returned value can be one of the following value:
+ * @arg RCC_SYSCLKSOURCE_STATUS_HSI: HSI used as system clock
+ * @arg RCC_SYSCLKSOURCE_STATUS_HSE: HSE used as system clock
+ * @arg RCC_SYSCLKSOURCE_STATUS_PLLCLK: PLL used as system clock
+ */
+#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS)))
+
+/** @brief Macro to get the oscillator used as PLL clock source.
+ * @retval The oscillator used as PLL clock source. The returned value can be one
+ * of the following:
+ * - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source.
+ * - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source.
+ */
+#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLSRC)))
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Flags_Interrupts_Management RCC Flags Interrupts Management
+ * @brief macros to manage the specified RCC Flags and interrupts.
+ * @{
+ */
+
+/** @brief Enable RCC interrupt (Perform Byte access to RCC_CIR[12:8] bits to enable
+ * the selected interrupts.).
+ * @param __INTERRUPT__: specifies the RCC interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDY: LSI ready interrupt enable
+ * @arg RCC_IT_LSERDY: LSE ready interrupt enable
+ * @arg RCC_IT_HSIRDY: HSI ready interrupt enable
+ * @arg RCC_IT_HSERDY: HSE ready interrupt enable
+ * @arg RCC_IT_PLLRDY: PLL ready interrupt enable
+ */
+#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *)CIR_BYTE1_ADDRESS |= (__INTERRUPT__))
+
+/** @brief Disable RCC interrupt (Perform Byte access to RCC_CIR[12:8] bits to disable
+ * the selected interrupts.).
+ * @param __INTERRUPT__: specifies the RCC interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDYIE: LSI ready interrupt enable
+ * @arg RCC_IT_LSERDYIE: LSE ready interrupt enable
+ * @arg RCC_IT_HSIRDYIE: HSI ready interrupt enable
+ * @arg RCC_IT_HSERDYIE: HSE ready interrupt enable
+ * @arg RCC_IT_PLLRDYIE: PLL ready interrupt enable
+ */
+#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *)CIR_BYTE1_ADDRESS &= ~(__INTERRUPT__))
+
+/** @brief Clear the RCC's interrupt pending bits ( Perform Byte access to RCC_CIR[23:16]
+ * bits to clear the selected interrupt pending bits.
+ * @param __IT__: specifies the interrupt pending bit to clear.
+ * This parameter can be any combination of the following values:
+ * @arg RCC_IT_LSIRDYC: LSI ready interrupt clear
+ * @arg RCC_IT_LSERDYC: LSE ready interrupt clear
+ * @arg RCC_IT_HSIRDYC: HSI ready interrupt clear
+ * @arg RCC_IT_HSERDYC: HSE ready interrupt clear
+ * @arg RCC_IT_PLLRDYC: PLL ready interrupt clear
+ * @arg RCC_IT_CSSC: Clock Security System interrupt clear
+ */
+#define __HAL_RCC_CLEAR_IT(__IT__) (*(__IO uint8_t *)CIR_BYTE2_ADDRESS = (__IT__))
+
+/** @brief Check the RCC's interrupt has occurred or not.
+ * @param __IT__: specifies the RCC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_IT_LSIRDYF: LSI ready interrupt flag
+ * @arg RCC_IT_LSERDYF: LSE ready interrupt flag
+ * @arg RCC_IT_HSIRDYF: HSI ready interrupt flag
+ * @arg RCC_IT_HSERDYF: HSE ready interrupt flag
+ * @arg RCC_IT_PLLRDYF: PLL ready interrupt flag
+ * @arg RCC_IT_CSSF: Clock Security System interrupt flag
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_RCC_GET_IT(__IT__) ((RCC->CIR & (__IT__)) == (__IT__))
+
+/** @brief Set RMVF bit to clear the reset flags: RCC_FLAG_OBLRST, RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST,
+ * RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST
+ */
+#define __HAL_RCC_CLEAR_RESET_FLAGS() (*(__IO uint32_t *)CSR_RMVF_BB = ENABLE)
+
+/** @brief Check RCC flag is set or not.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready
+ * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready
+ * @arg RCC_FLAG_PLLRDY: PLL clock ready
+ * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready
+ * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready
+ * @arg RCC_FLAG_OBLRST: Option Byte Load reset
+ * @arg RCC_FLAG_PINRST: Pin reset
+ * @arg RCC_FLAG_PORRST: POR/PDR reset
+ * @arg RCC_FLAG_SFTRST: Software reset
+ * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset
+ * @arg RCC_FLAG_WWDGRST: Window Watchdog reset
+ * @arg RCC_FLAG_LPWRRST: Low Power reset
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define RCC_FLAG_MASK ((uint32_t)0x0000001F)
+#define __HAL_RCC_GET_FLAG(__FLAG__) (((((__FLAG__) >> 5U) == CR_REG_INDEX)? RCC->CR : \
+ ((((__FLAG__) >> 5U) == BDCR_REG_INDEX) ? RCC->BDCR : \
+ RCC->CSR)) & (1U << ((__FLAG__) & RCC_FLAG_MASK)))
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Include RCC HAL Extended module */
+#include "stm32f3xx_hal_rcc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup RCC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ***************************/
+void HAL_RCC_DeInit(void);
+HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency);
+
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_Exported_Functions_Group2 Peripheral Control functions
+ * @{
+ */
+
+/* Peripheral Control functions *********************************************/
+void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv);
+void HAL_RCC_EnableCSS(void);
+void HAL_RCC_DisableCSS(void);
+uint32_t HAL_RCC_GetSysClockFreq(void);
+uint32_t HAL_RCC_GetHCLKFreq(void);
+uint32_t HAL_RCC_GetPCLK1Freq(void);
+uint32_t HAL_RCC_GetPCLK2Freq(void);
+void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
+void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency);
+
+/* CSS NMI IRQ handler */
+void HAL_RCC_NMI_IRQHandler(void);
+
+/* User Callbacks in non blocking mode (IT mode) */
+void HAL_RCC_CCSCallback(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_RCC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_rcc_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,3488 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_rcc_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of RCC HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_RCC_EX_H
+#define __STM32F3xx_HAL_RCC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RCCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RCCEx_Exported_Types RCC Extended Exported Types
+ * @{
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+/**
+ * @brief RCC PLL configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PLLState; /*!< PLLState: The new state of the PLL.
+ This parameter can be a value of @ref RCC_PLL_Config */
+
+ uint32_t PLLSource; /*!< PLLSource: PLL entry clock source.
+ This parameter must be a value of @ref RCCEx_PLL_Clock_Source */
+
+ uint32_t PLLMUL; /*!< PLLMUL: Multiplication factor for PLL VCO input clock
+ This parameter must be a value of @ref RCC_PLL_Multiplication_Factor*/
+
+ uint32_t PREDIV; /*!< PREDIV: Predivision factor for PLL VCO input clock
+ This parameter must be a value of @ref RCCEx_PLL_Prediv_Factor */
+
+}RCC_PLLInitTypeDef;
+
+/**
+ * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition
+ */
+typedef struct
+{
+ uint32_t OscillatorType; /*!< The oscillators to be configured.
+ This parameter can be a value of @ref RCC_Oscillator_Type */
+
+ uint32_t HSEState; /*!< The new state of the HSE.
+ This parameter can be a value of @ref RCC_HSE_Config */
+
+ uint32_t LSEState; /*!< The new state of the LSE.
+ This parameter can be a value of @ref RCC_LSE_Config */
+
+ uint32_t HSIState; /*!< The new state of the HSI.
+ This parameter can be a value of @ref RCC_HSI_Config */
+
+ uint32_t HSICalibrationValue; /*!< The calibration trimming value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
+
+ uint32_t LSIState; /*!< The new state of the LSI.
+ This parameter can be a value of @ref RCC_LSI_Config */
+
+ RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */
+
+}RCC_OscInitTypeDef;
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+/**
+ * @brief RCC PLL configuration structure definition
+ */
+typedef struct
+{
+ uint32_t PLLState; /*!< PLLState: The new state of the PLL.
+ This parameter can be a value of @ref RCC_PLL_Config */
+
+ uint32_t PLLSource; /*!< PLLSource: PLL entry clock source.
+ This parameter must be a value of @ref RCCEx_PLL_Clock_Source */
+
+ uint32_t PLLMUL; /*!< PLLMUL: Multiplication factor for PLL VCO input clock
+ This parameter must be a value of @ref RCC_PLL_Multiplication_Factor*/
+
+}RCC_PLLInitTypeDef;
+
+/**
+ * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition
+ */
+typedef struct
+{
+ uint32_t OscillatorType; /*!< The oscillators to be configured.
+ This parameter can be a value of @ref RCC_Oscillator_Type */
+
+ uint32_t HSEState; /*!< The new state of the HSE.
+ This parameter can be a value of @ref RCC_HSE_Config */
+
+ uint32_t HSEPredivValue; /*!< The HSE predivision factor value.
+ This parameter can be a value of @ref RCCEx_HSE_Predivision_Factor */
+
+ uint32_t LSEState; /*!< The new state of the LSE.
+ This parameter can be a value of @ref RCC_LSE_Config */
+
+ uint32_t HSIState; /*!< The new state of the HSI.
+ This parameter can be a value of @ref RCC_HSI_Config */
+
+ uint32_t HSICalibrationValue; /*!< The calibration trimming value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */
+
+ uint32_t LSIState; /*!< The new state of the LSI.
+ This parameter can be a value of @ref RCC_LSI_Config */
+
+ RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */
+
+}RCC_OscInitTypeDef;
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+ /* STM32F373xC || STM32F378xx */
+
+/**
+ * @brief RCC extended clocks structure definition
+ */
+#if defined(STM32F301x8) || defined(STM32F318xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t I2c3ClockSelection; /*!< I2C3 clock source
+ This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */
+
+ uint32_t Adc1ClockSelection; /*!< ADC1 clock source
+ This parameter can be a value of @ref RCCEx_ADC1_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim15ClockSelection; /*!< TIM15 clock source
+ This parameter can be a value of @ref RCCEx_TIM15_Clock_Source */
+
+ uint32_t Tim16ClockSelection; /*!< TIM16 clock source
+ This parameter can be a value of @ref RCCEx_TIM16_Clock_Source */
+
+ uint32_t Tim17ClockSelection; /*!< TIM17 clock source
+ This parameter can be a value of @ref RCCEx_TIM17_Clock_Source */
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F301x8 || STM32F318xx */
+
+#if defined(STM32F302x8)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t I2c3ClockSelection; /*!< I2C3 clock source
+ This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */
+
+ uint32_t Adc1ClockSelection; /*!< ADC1 clock source
+ This parameter can be a value of @ref RCCEx_ADC1_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim15ClockSelection; /*!< TIM15 clock source
+ This parameter can be a value of @ref RCCEx_TIM15_Clock_Source */
+
+ uint32_t Tim16ClockSelection; /*!< TIM16 clock source
+ This parameter can be a value of @ref RCCEx_TIM16_Clock_Source */
+
+ uint32_t Tim17ClockSelection; /*!< TIM17 clock source
+ This parameter can be a value of @ref RCCEx_TIM17_Clock_Source */
+
+ uint32_t USBClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F302x8 */
+
+#if defined(STM32F302xC)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t Uart4ClockSelection; /*!< UART4 clock source
+ This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+
+ uint32_t Uart5ClockSelection; /*!< UART5 clock source
+ This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t USBClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F302xC */
+
+#if defined(STM32F303xC)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t Uart4ClockSelection; /*!< UART4 clock source
+ This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+
+ uint32_t Uart5ClockSelection; /*!< UART5 clock source
+ This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Adc34ClockSelection; /*!< ADC3 & ADC4 clock source
+ This parameter can be a value of @ref RCCEx_ADC34_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim8ClockSelection; /*!< TIM8 clock source
+ This parameter can be a value of @ref RCCEx_TIM8_Clock_Source */
+
+ uint32_t USBClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F303xC */
+
+#if defined(STM32F302xE)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t Uart4ClockSelection; /*!< UART4 clock source
+ This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+
+ uint32_t Uart5ClockSelection; /*!< UART5 clock source
+ This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t I2c3ClockSelection; /*!< I2C3 clock source
+ This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim2ClockSelection; /*!< TIM2 clock source
+ This parameter can be a value of @ref RCCEx_TIM2_Clock_Source */
+
+ uint32_t Tim34ClockSelection; /*!< TIM3 & TIM4 clock source
+ This parameter can be a value of @ref RCCEx_TIM34_Clock_Source */
+
+ uint32_t Tim15ClockSelection; /*!< TIM15 clock source
+ This parameter can be a value of @ref RCCEx_TIM15_Clock_Source */
+
+ uint32_t Tim16ClockSelection; /*!< TIM16 clock source
+ This parameter can be a value of @ref RCCEx_TIM16_Clock_Source */
+
+ uint32_t Tim17ClockSelection; /*!< TIM17 clock source
+ This parameter can be a value of @ref RCCEx_TIM17_Clock_Source */
+
+ uint32_t USBClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F302xE */
+
+#if defined(STM32F303xE)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t Uart4ClockSelection; /*!< UART4 clock source
+ This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+
+ uint32_t Uart5ClockSelection; /*!< UART5 clock source
+ This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t I2c3ClockSelection; /*!< I2C3 clock source
+ This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Adc34ClockSelection; /*!< ADC3 & ADC4 clock source
+ This parameter can be a value of @ref RCCEx_ADC34_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim2ClockSelection; /*!< TIM2 clock source
+ This parameter can be a value of @ref RCCEx_TIM2_Clock_Source */
+
+ uint32_t Tim34ClockSelection; /*!< TIM3 & TIM4 clock source
+ This parameter can be a value of @ref RCCEx_TIM34_Clock_Source */
+
+ uint32_t Tim8ClockSelection; /*!< TIM8 clock source
+ This parameter can be a value of @ref RCCEx_TIM8_Clock_Source */
+
+ uint32_t Tim15ClockSelection; /*!< TIM15 clock source
+ This parameter can be a value of @ref RCCEx_TIM15_Clock_Source */
+
+ uint32_t Tim16ClockSelection; /*!< TIM16 clock source
+ This parameter can be a value of @ref RCCEx_TIM16_Clock_Source */
+
+ uint32_t Tim17ClockSelection; /*!< TIM17 clock source
+ This parameter can be a value of @ref RCCEx_TIM17_Clock_Source */
+
+ uint32_t Tim20ClockSelection; /*!< TIM20 clock source
+ This parameter can be a value of @ref RCCEx_TIM20_Clock_Source */
+
+ uint32_t USBClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F303xE */
+
+#if defined(STM32F398xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t Uart4ClockSelection; /*!< UART4 clock source
+ This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+
+ uint32_t Uart5ClockSelection; /*!< UART5 clock source
+ This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t I2c3ClockSelection; /*!< I2C3 clock source
+ This parameter can be a value of @ref RCCEx_I2C3_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Adc34ClockSelection; /*!< ADC3 & ADC4 clock source
+ This parameter can be a value of @ref RCCEx_ADC34_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim2ClockSelection; /*!< TIM2 clock source
+ This parameter can be a value of @ref RCCEx_TIM2_Clock_Source */
+
+ uint32_t Tim34ClockSelection; /*!< TIM3 & TIM4 clock source
+ This parameter can be a value of @ref RCCEx_TIM34_Clock_Source */
+
+ uint32_t Tim8ClockSelection; /*!< TIM8 clock source
+ This parameter can be a value of @ref RCCEx_TIM8_Clock_Source */
+
+ uint32_t Tim15ClockSelection; /*!< TIM15 clock source
+ This parameter can be a value of @ref RCCEx_TIM15_Clock_Source */
+
+ uint32_t Tim16ClockSelection; /*!< TIM16 clock source
+ This parameter can be a value of @ref RCCEx_TIM16_Clock_Source */
+
+ uint32_t Tim17ClockSelection; /*!< TIM17 clock source
+ This parameter can be a value of @ref RCCEx_TIM17_Clock_Source */
+
+ uint32_t Tim20ClockSelection; /*!< TIM20 clock source
+ This parameter can be a value of @ref RCCEx_TIM20_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F398xx */
+
+#if defined(STM32F358xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t Uart4ClockSelection; /*!< UART4 clock source
+ This parameter can be a value of @ref RCCEx_UART4_Clock_Source */
+
+ uint32_t Uart5ClockSelection; /*!< UART5 clock source
+ This parameter can be a value of @ref RCCEx_UART5_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Adc34ClockSelection; /*!< ADC3 & ADC4 clock source
+ This parameter can be a value of @ref RCCEx_ADC34_Clock_Source */
+
+ uint32_t I2sClockSelection; /*!< I2S clock source
+ This parameter can be a value of @ref RCCEx_I2S_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Tim8ClockSelection; /*!< TIM8 clock source
+ This parameter can be a value of @ref RCCEx_TIM8_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F358xx */
+
+#if defined(STM32F303x8)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F303x8 */
+
+#if defined(STM32F334x8)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+ uint32_t Hrtim1ClockSelection; /*!< HRTIM1 clock source
+ This parameter can be a value of @ref RCCEx_HRTIM1_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F334x8 */
+
+#if defined(STM32F328xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCC_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t Adc12ClockSelection; /*!< ADC1 & ADC2 clock source
+ This parameter can be a value of @ref RCCEx_ADC12_Clock_Source */
+
+ uint32_t Tim1ClockSelection; /*!< TIM1 clock source
+ This parameter can be a value of @ref RCCEx_TIM1_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F328xx */
+
+#if defined(STM32F373xC)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t Adc1ClockSelection; /*!< ADC1 clock source
+ This parameter can be a value of @ref RCCEx_ADC1_Clock_Source */
+
+ uint32_t SdadcClockSelection; /*!< SDADC clock prescaler
+ This parameter can be a value of @ref RCCEx_SDADC_Clock_Prescaler */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+ uint32_t USBClockSelection; /*!< USB clock source
+ This parameter can be a value of @ref RCCEx_USB_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F373xC */
+
+#if defined(STM32F378xx)
+typedef struct
+{
+ uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured.
+ This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */
+
+ uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection
+ This parameter can be a value of @ref RCC_RTC_Clock_Source */
+
+ uint32_t Usart1ClockSelection; /*!< USART1 clock source
+ This parameter can be a value of @ref RCCEx_USART1_Clock_Source */
+
+ uint32_t Usart2ClockSelection; /*!< USART2 clock source
+ This parameter can be a value of @ref RCC_USART2_Clock_Source */
+
+ uint32_t Usart3ClockSelection; /*!< USART3 clock source
+ This parameter can be a value of @ref RCC_USART3_Clock_Source */
+
+ uint32_t I2c1ClockSelection; /*!< I2C1 clock source
+ This parameter can be a value of @ref RCC_I2C1_Clock_Source */
+
+ uint32_t I2c2ClockSelection; /*!< I2C2 clock source
+ This parameter can be a value of @ref RCCEx_I2C2_Clock_Source */
+
+ uint32_t Adc1ClockSelection; /*!< ADC1 clock source
+ This parameter can be a value of @ref RCCEx_ADC1_Clock_Source */
+
+ uint32_t SdadcClockSelection; /*!< SDADC clock prescaler
+ This parameter can be a value of @ref RCCEx_SDADC_Clock_Prescaler */
+
+ uint32_t CecClockSelection; /*!< HDMI CEC clock source
+ This parameter can be a value of @ref RCCEx_CEC_Clock_Source */
+
+}RCC_PeriphCLKInitTypeDef;
+#endif /* STM32F378xx */
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Constants RCC Extended Exported Constants
+ * @{
+ */
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F334x8) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup RCCEx_MCO_Clock_Source RCC Extended MCO Clock Source
+ * @{
+ */
+#define RCC_MCOSOURCE_NONE RCC_CFGR_MCO_NOCLOCK
+#define RCC_MCOSOURCE_LSI RCC_CFGR_MCO_LSI
+#define RCC_MCOSOURCE_LSE RCC_CFGR_MCO_LSE
+#define RCC_MCOSOURCE_SYSCLK RCC_CFGR_MCO_SYSCLK
+#define RCC_MCOSOURCE_HSI RCC_CFGR_MCO_HSI
+#define RCC_MCOSOURCE_HSE RCC_CFGR_MCO_HSE
+#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_CFGR_MCO_PLL
+
+#define IS_RCC_MCOSOURCE(SOURCE) (((SOURCE) == RCC_MCOSOURCE_NONE) || \
+ ((SOURCE) == RCC_MCOSOURCE_LSI) || \
+ ((SOURCE) == RCC_MCOSOURCE_LSE) || \
+ ((SOURCE) == RCC_MCOSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_MCOSOURCE_HSI) || \
+ ((SOURCE) == RCC_MCOSOURCE_HSE) || \
+ ((SOURCE) == RCC_MCOSOURCE_PLLCLK_DIV2))
+/**
+ * @}
+ */
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F334x8 */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/** @defgroup RCCEx_MCO_Clock_Source RCC Extended MCO Clock Source
+ * @{
+ */
+#define RCC_MCOSOURCE_NONE RCC_CFGR_MCO_NOCLOCK
+#define RCC_MCOSOURCE_LSI RCC_CFGR_MCO_LSI
+#define RCC_MCOSOURCE_LSE RCC_CFGR_MCO_LSE
+#define RCC_MCOSOURCE_SYSCLK RCC_CFGR_MCO_SYSCLK
+#define RCC_MCOSOURCE_HSI RCC_CFGR_MCO_HSI
+#define RCC_MCOSOURCE_HSE RCC_CFGR_MCO_HSE
+#define RCC_MCOSOURCE_PLLCLK_DIV1 (RCC_CFGR_PLLNODIV | RCC_CFGR_MCO_PLL)
+#define RCC_MCOSOURCE_PLLCLK_DIV2 RCC_CFGR_MCO_PLL
+
+#define IS_RCC_MCOSOURCE(SOURCE) (((SOURCE) == RCC_MCOSOURCE_NONE) || \
+ ((SOURCE) == RCC_MCOSOURCE_LSI) || \
+ ((SOURCE) == RCC_MCOSOURCE_LSE) || \
+ ((SOURCE) == RCC_MCOSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_MCOSOURCE_HSI) || \
+ ((SOURCE) == RCC_MCOSOURCE_HSE) || \
+ ((SOURCE) == RCC_MCOSOURCE_PLLCLK_DIV1) || \
+ ((SOURCE) == RCC_MCOSOURCE_PLLCLK_DIV2))
+/**
+ * @}
+ */
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+ /* STM32F303x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+/** @defgroup RCCEx_PLL_Clock_Source RCC Extended PLL Clock Source
+ * @{
+ */
+#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_PREDIV
+#define RCC_PLLSOURCE_HSE RCC_CFGR_PLLSRC_HSE_PREDIV
+
+#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \
+ ((SOURCE) == RCC_PLLSOURCE_HSE))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_PLL_Prediv_Factor RCC Extended PLL Prediv Factor
+ * @{
+ */
+#define RCC_PREDIV_DIV1 RCC_CFGR2_PREDIV_DIV1
+#define RCC_PREDIV_DIV2 RCC_CFGR2_PREDIV_DIV2
+#define RCC_PREDIV_DIV3 RCC_CFGR2_PREDIV_DIV3
+#define RCC_PREDIV_DIV4 RCC_CFGR2_PREDIV_DIV4
+#define RCC_PREDIV_DIV5 RCC_CFGR2_PREDIV_DIV5
+#define RCC_PREDIV_DIV6 RCC_CFGR2_PREDIV_DIV6
+#define RCC_PREDIV_DIV7 RCC_CFGR2_PREDIV_DIV7
+#define RCC_PREDIV_DIV8 RCC_CFGR2_PREDIV_DIV8
+#define RCC_PREDIV_DIV9 RCC_CFGR2_PREDIV_DIV9
+#define RCC_PREDIV_DIV10 RCC_CFGR2_PREDIV_DIV10
+#define RCC_PREDIV_DIV11 RCC_CFGR2_PREDIV_DIV11
+#define RCC_PREDIV_DIV12 RCC_CFGR2_PREDIV_DIV12
+#define RCC_PREDIV_DIV13 RCC_CFGR2_PREDIV_DIV13
+#define RCC_PREDIV_DIV14 RCC_CFGR2_PREDIV_DIV14
+#define RCC_PREDIV_DIV15 RCC_CFGR2_PREDIV_DIV15
+#define RCC_PREDIV_DIV16 RCC_CFGR2_PREDIV_DIV16
+
+#define IS_RCC_PREDIV(PREDIV) (((PREDIV) == RCC_PREDIV_DIV1) || ((PREDIV) == RCC_PREDIV_DIV2) || \
+ ((PREDIV) == RCC_PREDIV_DIV3) || ((PREDIV) == RCC_PREDIV_DIV4) || \
+ ((PREDIV) == RCC_PREDIV_DIV5) || ((PREDIV) == RCC_PREDIV_DIV6) || \
+ ((PREDIV) == RCC_PREDIV_DIV7) || ((PREDIV) == RCC_PREDIV_DIV8) || \
+ ((PREDIV) == RCC_PREDIV_DIV9) || ((PREDIV) == RCC_PREDIV_DIV10) || \
+ ((PREDIV) == RCC_PREDIV_DIV11) || ((PREDIV) == RCC_PREDIV_DIV12) || \
+ ((PREDIV) == RCC_PREDIV_DIV13) || ((PREDIV) == RCC_PREDIV_DIV14) || \
+ ((PREDIV) == RCC_PREDIV_DIV15) || ((PREDIV) == RCC_PREDIV_DIV16))
+/**
+ * @}
+ */
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup RCCEx_PLL_Clock_Source RCC Extended PLL Clock Source
+ * @{
+ */
+#define RCC_PLLSOURCE_HSI RCC_CFGR_PLLSRC_HSI_DIV2
+#define RCC_PLLSOURCE_HSE RCC_CFGR_PLLSRC_HSE_PREDIV
+
+#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \
+ ((SOURCE) == RCC_PLLSOURCE_HSE))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_HSE_Predivision_Factor RCC Extended HSE Predivision Factor
+ * @{
+ */
+
+#define RCC_HSE_PREDIV_DIV1 RCC_CFGR2_PREDIV_DIV1
+#define RCC_HSE_PREDIV_DIV2 RCC_CFGR2_PREDIV_DIV2
+#define RCC_HSE_PREDIV_DIV3 RCC_CFGR2_PREDIV_DIV3
+#define RCC_HSE_PREDIV_DIV4 RCC_CFGR2_PREDIV_DIV4
+#define RCC_HSE_PREDIV_DIV5 RCC_CFGR2_PREDIV_DIV5
+#define RCC_HSE_PREDIV_DIV6 RCC_CFGR2_PREDIV_DIV6
+#define RCC_HSE_PREDIV_DIV7 RCC_CFGR2_PREDIV_DIV7
+#define RCC_HSE_PREDIV_DIV8 RCC_CFGR2_PREDIV_DIV8
+#define RCC_HSE_PREDIV_DIV9 RCC_CFGR2_PREDIV_DIV9
+#define RCC_HSE_PREDIV_DIV10 RCC_CFGR2_PREDIV_DIV10
+#define RCC_HSE_PREDIV_DIV11 RCC_CFGR2_PREDIV_DIV11
+#define RCC_HSE_PREDIV_DIV12 RCC_CFGR2_PREDIV_DIV12
+#define RCC_HSE_PREDIV_DIV13 RCC_CFGR2_PREDIV_DIV13
+#define RCC_HSE_PREDIV_DIV14 RCC_CFGR2_PREDIV_DIV14
+#define RCC_HSE_PREDIV_DIV15 RCC_CFGR2_PREDIV_DIV15
+#define RCC_HSE_PREDIV_DIV16 RCC_CFGR2_PREDIV_DIV16
+
+#define IS_RCC_HSE_PREDIV(DIV) (((DIV) == RCC_HSE_PREDIV_DIV1) || ((DIV) == RCC_HSE_PREDIV_DIV2) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV3) || ((DIV) == RCC_HSE_PREDIV_DIV4) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV5) || ((DIV) == RCC_HSE_PREDIV_DIV6) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV7) || ((DIV) == RCC_HSE_PREDIV_DIV8) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV9) || ((DIV) == RCC_HSE_PREDIV_DIV10) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV11) || ((DIV) == RCC_HSE_PREDIV_DIV12) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV13) || ((DIV) == RCC_HSE_PREDIV_DIV14) || \
+ ((DIV) == RCC_HSE_PREDIV_DIV15) || ((DIV) == RCC_HSE_PREDIV_DIV16))
+/**
+ * @}
+ */
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+ /* STM32F373xC || STM32F378xx */
+
+/** @defgroup RCCEx_Periph_Clock_Selection RCC Extended Periph Clock Selection
+ * @{
+ */
+#if defined(STM32F301x8) || defined(STM32F318xx)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00000040)
+#define RCC_PERIPHCLK_ADC1 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000200)
+#define RCC_PERIPHCLK_TIM1 ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_I2C3 ((uint32_t)0x00008000)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_TIM15 ((uint32_t)0x00040000)
+#define RCC_PERIPHCLK_TIM16 ((uint32_t)0x00080000)
+#define RCC_PERIPHCLK_TIM17 ((uint32_t)0x00100000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC1 | RCC_PERIPHCLK_I2S | \
+ RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_TIM1 | \
+ RCC_PERIPHCLK_TIM15 | RCC_PERIPHCLK_TIM16 | \
+ RCC_PERIPHCLK_TIM17 | RCC_PERIPHCLK_RTC))
+#endif /* STM32F301x8 || STM32F318xx */
+
+#if defined(STM32F302x8)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00000040)
+#define RCC_PERIPHCLK_ADC1 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000200)
+#define RCC_PERIPHCLK_TIM1 ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_I2C3 ((uint32_t)0x00008000)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_USB ((uint32_t)0x00020000)
+#define RCC_PERIPHCLK_TIM15 ((uint32_t)0x00040000)
+#define RCC_PERIPHCLK_TIM16 ((uint32_t)0x00080000)
+#define RCC_PERIPHCLK_TIM17 ((uint32_t)0x00100000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC1 | RCC_PERIPHCLK_I2S | \
+ RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_TIM1 | \
+ RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_USB | \
+ RCC_PERIPHCLK_TIM15 | RCC_PERIPHCLK_TIM16 | \
+ RCC_PERIPHCLK_TIM17))
+#endif /* STM32F302x8 */
+
+#if defined(STM32F302xC)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_UART4 ((uint32_t)0x00000008)
+#define RCC_PERIPHCLK_UART5 ((uint32_t)0x00000010)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00000040)
+#define RCC_PERIPHCLK_ADC12 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000200)
+#define RCC_PERIPHCLK_TIM1 ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_USB ((uint32_t)0x00020000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC12 | RCC_PERIPHCLK_I2S | \
+ RCC_PERIPHCLK_TIM1 | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB))
+#endif /* STM32F302xC */
+
+#if defined(STM32F303xC)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_UART4 ((uint32_t)0x00000008)
+#define RCC_PERIPHCLK_UART5 ((uint32_t)0x00000010)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00000040)
+#define RCC_PERIPHCLK_ADC12 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_ADC34 ((uint32_t)0x00000100)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000200)
+#define RCC_PERIPHCLK_TIM1 ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_TIM8 ((uint32_t)0x00002000)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_USB ((uint32_t)0x00020000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC12 | RCC_PERIPHCLK_ADC34 | \
+ RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_TIM1 | \
+ RCC_PERIPHCLK_TIM8 | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB))
+#endif /* STM32F303xC */
+
+#if defined(STM32F302xE)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_UART4 ((uint32_t)0x00000008)
+#define RCC_PERIPHCLK_UART5 ((uint32_t)0x00000010)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00000040)
+#define RCC_PERIPHCLK_ADC12 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000200)
+#define RCC_PERIPHCLK_TIM1 ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_USB ((uint32_t)0x00020000)
+#define RCC_PERIPHCLK_I2C3 ((uint32_t)0x00040000)
+#define RCC_PERIPHCLK_TIM2 ((uint32_t)0x00100000)
+#define RCC_PERIPHCLK_TIM34 ((uint32_t)0x00200000)
+#define RCC_PERIPHCLK_TIM15 ((uint32_t)0x00400000)
+#define RCC_PERIPHCLK_TIM16 ((uint32_t)0x00800000)
+#define RCC_PERIPHCLK_TIM17 ((uint32_t)0x01000000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC12 | RCC_PERIPHCLK_I2S | \
+ RCC_PERIPHCLK_TIM1 | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB | RCC_PERIPHCLK_I2C3 | \
+ RCC_PERIPHCLK_TIM2 | RCC_PERIPHCLK_TIM34 | \
+ RCC_PERIPHCLK_TIM15 | RCC_PERIPHCLK_TIM16 | \
+ RCC_PERIPHCLK_TIM17))
+#endif /* STM32F302xE */
+
+#if defined(STM32F303xE)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_UART4 ((uint32_t)0x00000008)
+#define RCC_PERIPHCLK_UART5 ((uint32_t)0x00000010)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00000040)
+#define RCC_PERIPHCLK_ADC12 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_ADC34 ((uint32_t)0x00000100)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000200)
+#define RCC_PERIPHCLK_TIM1 ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_TIM8 ((uint32_t)0x00002000)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_USB ((uint32_t)0x00020000)
+#define RCC_PERIPHCLK_I2C3 ((uint32_t)0x00040000)
+#define RCC_PERIPHCLK_TIM2 ((uint32_t)0x00100000)
+#define RCC_PERIPHCLK_TIM34 ((uint32_t)0x00200000)
+#define RCC_PERIPHCLK_TIM15 ((uint32_t)0x00400000)
+#define RCC_PERIPHCLK_TIM16 ((uint32_t)0x00800000)
+#define RCC_PERIPHCLK_TIM17 ((uint32_t)0x01000000)
+#define RCC_PERIPHCLK_TIM20 ((uint32_t)0x02000000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC12 | RCC_PERIPHCLK_ADC34 | \
+ RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_TIM1 | \
+ RCC_PERIPHCLK_TIM8 | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB | RCC_PERIPHCLK_I2C3 | \
+ RCC_PERIPHCLK_TIM2 | RCC_PERIPHCLK_TIM34 | \
+ RCC_PERIPHCLK_TIM15 | RCC_PERIPHCLK_TIM16 | \
+ RCC_PERIPHCLK_TIM17 | RCC_PERIPHCLK_TIM20))
+#endif /* STM32F303xE */
+
+#if defined(STM32F398xx)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_UART4 ((uint32_t)0x00000008)
+#define RCC_PERIPHCLK_UART5 ((uint32_t)0x00000010)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00000040)
+#define RCC_PERIPHCLK_ADC12 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_ADC34 ((uint32_t)0x00000100)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000200)
+#define RCC_PERIPHCLK_TIM1 ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_TIM8 ((uint32_t)0x00002000)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_I2C3 ((uint32_t)0x00040000)
+#define RCC_PERIPHCLK_TIM2 ((uint32_t)0x00100000)
+#define RCC_PERIPHCLK_TIM34 ((uint32_t)0x00200000)
+#define RCC_PERIPHCLK_TIM15 ((uint32_t)0x00400000)
+#define RCC_PERIPHCLK_TIM16 ((uint32_t)0x00800000)
+#define RCC_PERIPHCLK_TIM17 ((uint32_t)0x01000000)
+#define RCC_PERIPHCLK_TIM20 ((uint32_t)0x02000000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC12 | RCC_PERIPHCLK_ADC34 | \
+ RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_TIM1 | \
+ RCC_PERIPHCLK_TIM8 | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_TIM2 | \
+ RCC_PERIPHCLK_TIM34 | RCC_PERIPHCLK_TIM15 | \
+ RCC_PERIPHCLK_TIM16 | RCC_PERIPHCLK_TIM17 | \
+ RCC_PERIPHCLK_TIM20))
+#endif /* STM32F398xx */
+
+#if defined(STM32F358xx)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_UART4 ((uint32_t)0x00000008)
+#define RCC_PERIPHCLK_UART5 ((uint32_t)0x00000010)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00000040)
+#define RCC_PERIPHCLK_ADC12 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_ADC34 ((uint32_t)0x00000100)
+#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000200)
+#define RCC_PERIPHCLK_TIM1 ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_TIM8 ((uint32_t)0x00002000)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC12 | RCC_PERIPHCLK_ADC34 | \
+ RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_TIM1 | \
+ RCC_PERIPHCLK_TIM8 | RCC_PERIPHCLK_RTC))
+#endif /* STM32F358xx */
+
+#if defined(STM32F303x8)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_ADC12 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_TIM1 ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_ADC12 | \
+ RCC_PERIPHCLK_TIM1 | RCC_PERIPHCLK_RTC))
+#endif /* STM32F303x8 */
+
+#if defined(STM32F334x8)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_ADC12 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_TIM1 ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_HRTIM1 ((uint32_t)0x00004000)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_ADC12 | \
+ RCC_PERIPHCLK_TIM1 | RCC_PERIPHCLK_HRTIM1 | \
+ RCC_PERIPHCLK_RTC))
+#endif /* STM32F334x8 */
+
+#if defined(STM32F328xx)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_ADC12 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_TIM1 ((uint32_t)0x00001000)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_ADC12 | \
+ RCC_PERIPHCLK_TIM1 | RCC_PERIPHCLK_RTC))
+#endif /* STM32F328xx */
+
+#if defined(STM32F373xC)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00000040)
+#define RCC_PERIPHCLK_ADC1 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_CEC ((uint32_t)0x00000400)
+#define RCC_PERIPHCLK_SDADC ((uint32_t)0x00000800)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+#define RCC_PERIPHCLK_USB ((uint32_t)0x00020000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC1 | RCC_PERIPHCLK_SDADC | \
+ RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_RTC | \
+ RCC_PERIPHCLK_USB))
+#endif /* STM32F373xC */
+
+#if defined(STM32F378xx)
+#define RCC_PERIPHCLK_USART1 ((uint32_t)0x00000001)
+#define RCC_PERIPHCLK_USART2 ((uint32_t)0x00000002)
+#define RCC_PERIPHCLK_USART3 ((uint32_t)0x00000004)
+#define RCC_PERIPHCLK_I2C1 ((uint32_t)0x00000020)
+#define RCC_PERIPHCLK_I2C2 ((uint32_t)0x00000040)
+#define RCC_PERIPHCLK_ADC1 ((uint32_t)0x00000080)
+#define RCC_PERIPHCLK_CEC ((uint32_t)0x00000400)
+#define RCC_PERIPHCLK_SDADC ((uint32_t)0x00000800)
+#define RCC_PERIPHCLK_RTC ((uint32_t)0x00010000)
+
+#define IS_RCC_PERIPHCLK(SELECTION) ((SELECTION) <= (RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \
+ RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | \
+ RCC_PERIPHCLK_ADC1 | RCC_PERIPHCLK_SDADC | \
+ RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_RTC))
+#endif /* STM32F378xx */
+/**
+ * @}
+ */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+/** @defgroup RCCEx_USART1_Clock_Source RCC Extended USART1 Clock Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK2 RCC_CFGR3_USART1SW_PCLK
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK2) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C2_Clock_Source RCC Extended I2C2 Clock Source
+ * @{
+ */
+#define RCC_I2C2CLKSOURCE_HSI RCC_CFGR3_I2C2SW_HSI
+#define RCC_I2C2CLKSOURCE_SYSCLK RCC_CFGR3_I2C2SW_SYSCLK
+
+#define IS_RCC_I2C2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C2CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C2CLKSOURCE_SYSCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C3_Clock_Source RCC Extended I2C3 Clock Source
+ * @{
+ */
+#define RCC_I2C3CLKSOURCE_HSI RCC_CFGR3_I2C3SW_HSI
+#define RCC_I2C3CLKSOURCE_SYSCLK RCC_CFGR3_I2C3SW_SYSCLK
+
+#define IS_RCC_I2C3CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C3CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C3CLKSOURCE_SYSCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADC1_Clock_Source RCC Extended ADC1 Clock Source
+ * @{
+ */
+#define RCC_ADC1PLLCLK_OFF RCC_CFGR2_ADC1PRES_NO
+#define RCC_ADC1PLLCLK_DIV1 RCC_CFGR2_ADC1PRES_DIV1
+#define RCC_ADC1PLLCLK_DIV2 RCC_CFGR2_ADC1PRES_DIV2
+#define RCC_ADC1PLLCLK_DIV4 RCC_CFGR2_ADC1PRES_DIV4
+#define RCC_ADC1PLLCLK_DIV6 RCC_CFGR2_ADC1PRES_DIV6
+#define RCC_ADC1PLLCLK_DIV8 RCC_CFGR2_ADC1PRES_DIV8
+#define RCC_ADC1PLLCLK_DIV10 RCC_CFGR2_ADC1PRES_DIV10
+#define RCC_ADC1PLLCLK_DIV12 RCC_CFGR2_ADC1PRES_DIV12
+#define RCC_ADC1PLLCLK_DIV16 RCC_CFGR2_ADC1PRES_DIV16
+#define RCC_ADC1PLLCLK_DIV32 RCC_CFGR2_ADC1PRES_DIV32
+#define RCC_ADC1PLLCLK_DIV64 RCC_CFGR2_ADC1PRES_DIV64
+#define RCC_ADC1PLLCLK_DIV128 RCC_CFGR2_ADC1PRES_DIV128
+#define RCC_ADC1PLLCLK_DIV256 RCC_CFGR2_ADC1PRES_DIV256
+
+#define IS_RCC_ADC1PLLCLK_DIV(ADCCLK) (((ADCCLK) == RCC_ADC1PLLCLK_OFF) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV1) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV2) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV4) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV6) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV8) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV10) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV12) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV16) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV32) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV64) || ((ADCCLK) == RCC_ADC1PLLCLK_DIV128) || \
+ ((ADCCLK) == RCC_ADC1PLLCLK_DIV256))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2S_Clock_Source RCC Extended I2S Clock Source
+ * @{
+ */
+#define RCC_I2SCLKSOURCE_SYSCLK RCC_CFGR_I2SSRC_SYSCLK
+#define RCC_I2SCLKSOURCE_EXT RCC_CFGR_I2SSRC_EXT
+
+#define IS_RCC_I2SCLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SCLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_I2SCLKSOURCE_EXT))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM1_Clock_Source RCC Extended TIM1 Clock Source
+ * @{
+ */
+#define RCC_TIM1CLK_HCLK RCC_CFGR3_TIM1SW_HCLK
+#define RCC_TIM1CLK_PLLCLK RCC_CFGR3_TIM1SW_PLL
+
+#define IS_RCC_TIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM1CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM1CLK_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM15_Clock_Source RCC Extended TIM15 Clock Source
+ * @{
+ */
+#define RCC_TIM15CLK_HCLK RCC_CFGR3_TIM15SW_HCLK
+#define RCC_TIM15CLK_PLLCLK RCC_CFGR3_TIM15SW_PLL
+
+#define IS_RCC_TIM15CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM15CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM15CLK_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM16_Clock_Source RCC Extended TIM16 Clock Source
+ * @{
+ */
+#define RCC_TIM16CLK_HCLK RCC_CFGR3_TIM16SW_HCLK
+#define RCC_TIM16CLK_PLLCLK RCC_CFGR3_TIM16SW_PLL
+
+#define IS_RCC_TIM16CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM16CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM16CLK_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM17_Clock_Source RCC Extended TIM17 Clock Source
+ * @{
+ */
+#define RCC_TIM17CLK_HCLK RCC_CFGR3_TIM17SW_HCLK
+#define RCC_TIM17CLK_PLLCLK RCC_CFGR3_TIM17SW_PLL
+
+#define IS_RCC_TIM17CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM17CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM17CLK_PLLCLK))
+/**
+ * @}
+ */
+
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+
+/** @defgroup RCCEx_USART1_Clock_Source RCC Extended USART1 Clock Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK2 RCC_CFGR3_USART1SW_PCLK
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK2) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C2_Clock_Source RCC Extended I2C2 Clock Source
+ * @{
+ */
+#define RCC_I2C2CLKSOURCE_HSI RCC_CFGR3_I2C2SW_HSI
+#define RCC_I2C2CLKSOURCE_SYSCLK RCC_CFGR3_I2C2SW_SYSCLK
+
+#define IS_RCC_I2C2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C2CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C2CLKSOURCE_SYSCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADC12_Clock_Source RCC Extended ADC12 Clock Source
+ * @{
+ */
+
+/* ADC1 & ADC2 */
+#define RCC_ADC12PLLCLK_OFF RCC_CFGR2_ADCPRE12_NO
+#define RCC_ADC12PLLCLK_DIV1 RCC_CFGR2_ADCPRE12_DIV1
+#define RCC_ADC12PLLCLK_DIV2 RCC_CFGR2_ADCPRE12_DIV2
+#define RCC_ADC12PLLCLK_DIV4 RCC_CFGR2_ADCPRE12_DIV4
+#define RCC_ADC12PLLCLK_DIV6 RCC_CFGR2_ADCPRE12_DIV6
+#define RCC_ADC12PLLCLK_DIV8 RCC_CFGR2_ADCPRE12_DIV8
+#define RCC_ADC12PLLCLK_DIV10 RCC_CFGR2_ADCPRE12_DIV10
+#define RCC_ADC12PLLCLK_DIV12 RCC_CFGR2_ADCPRE12_DIV12
+#define RCC_ADC12PLLCLK_DIV16 RCC_CFGR2_ADCPRE12_DIV16
+#define RCC_ADC12PLLCLK_DIV32 RCC_CFGR2_ADCPRE12_DIV32
+#define RCC_ADC12PLLCLK_DIV64 RCC_CFGR2_ADCPRE12_DIV64
+#define RCC_ADC12PLLCLK_DIV128 RCC_CFGR2_ADCPRE12_DIV128
+#define RCC_ADC12PLLCLK_DIV256 RCC_CFGR2_ADCPRE12_DIV256
+
+#define IS_RCC_ADC12PLLCLK_DIV(ADCCLK) (((ADCCLK) == RCC_ADC12PLLCLK_OFF) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV1) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV2) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV4) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV6) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV8) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV10) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV12) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV16) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV32) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV64) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV128) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV256))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2S_Clock_Source RCC Extended I2S Clock Source
+ * @{
+ */
+#define RCC_I2SCLKSOURCE_SYSCLK RCC_CFGR_I2SSRC_SYSCLK
+#define RCC_I2SCLKSOURCE_EXT RCC_CFGR_I2SSRC_EXT
+
+#define IS_RCC_I2SCLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SCLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_I2SCLKSOURCE_EXT))
+/**
+ * @}
+ */
+/** @defgroup RCCEx_TIM1_Clock_Source RCC Extended TIM1 Clock Source
+ * @{
+ */
+#define RCC_TIM1CLK_HCLK RCC_CFGR3_TIM1SW_HCLK
+#define RCC_TIM1CLK_PLLCLK RCC_CFGR3_TIM1SW_PLL
+
+#define IS_RCC_TIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM1CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM1CLK_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_UART4_Clock_Source RCC Extended UART4 Clock Source
+ * @{
+ */
+#define RCC_UART4CLKSOURCE_PCLK1 RCC_CFGR3_UART4SW_PCLK
+#define RCC_UART4CLKSOURCE_SYSCLK RCC_CFGR3_UART4SW_SYSCLK
+#define RCC_UART4CLKSOURCE_LSE RCC_CFGR3_UART4SW_LSE
+#define RCC_UART4CLKSOURCE_HSI RCC_CFGR3_UART4SW_HSI
+
+#define IS_RCC_UART4CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART4CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_UART5_Clock_Source RCC Extended UART5 Clock Source
+ * @{
+ */
+#define RCC_UART5CLKSOURCE_PCLK1 RCC_CFGR3_UART5SW_PCLK
+#define RCC_UART5CLKSOURCE_SYSCLK RCC_CFGR3_UART5SW_SYSCLK
+#define RCC_UART5CLKSOURCE_LSE RCC_CFGR3_UART5SW_LSE
+#define RCC_UART5CLKSOURCE_HSI RCC_CFGR3_UART5SW_HSI
+
+#define IS_RCC_UART5CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART5CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+
+/** @defgroup RCCEx_USART1_Clock_Source RCC Extended USART1 Clock Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK2 RCC_CFGR3_USART1SW_PCLK
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK2) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C2_Clock_Source RCC Extended I2C2 Clock Source
+ * @{
+ */
+#define RCC_I2C2CLKSOURCE_HSI RCC_CFGR3_I2C2SW_HSI
+#define RCC_I2C2CLKSOURCE_SYSCLK RCC_CFGR3_I2C2SW_SYSCLK
+
+#define IS_RCC_I2C2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C2CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C2CLKSOURCE_SYSCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C3_Clock_Source RCC Extended I2C3 Clock Source
+ * @{
+ */
+#define RCC_I2C3CLKSOURCE_HSI RCC_CFGR3_I2C3SW_HSI
+#define RCC_I2C3CLKSOURCE_SYSCLK RCC_CFGR3_I2C3SW_SYSCLK
+
+#define IS_RCC_I2C3CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C3CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C3CLKSOURCE_SYSCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADC12_Clock_Source RCC Extended ADC12 Clock Source
+ * @{
+ */
+
+/* ADC1 & ADC2 */
+#define RCC_ADC12PLLCLK_OFF RCC_CFGR2_ADCPRE12_NO
+#define RCC_ADC12PLLCLK_DIV1 RCC_CFGR2_ADCPRE12_DIV1
+#define RCC_ADC12PLLCLK_DIV2 RCC_CFGR2_ADCPRE12_DIV2
+#define RCC_ADC12PLLCLK_DIV4 RCC_CFGR2_ADCPRE12_DIV4
+#define RCC_ADC12PLLCLK_DIV6 RCC_CFGR2_ADCPRE12_DIV6
+#define RCC_ADC12PLLCLK_DIV8 RCC_CFGR2_ADCPRE12_DIV8
+#define RCC_ADC12PLLCLK_DIV10 RCC_CFGR2_ADCPRE12_DIV10
+#define RCC_ADC12PLLCLK_DIV12 RCC_CFGR2_ADCPRE12_DIV12
+#define RCC_ADC12PLLCLK_DIV16 RCC_CFGR2_ADCPRE12_DIV16
+#define RCC_ADC12PLLCLK_DIV32 RCC_CFGR2_ADCPRE12_DIV32
+#define RCC_ADC12PLLCLK_DIV64 RCC_CFGR2_ADCPRE12_DIV64
+#define RCC_ADC12PLLCLK_DIV128 RCC_CFGR2_ADCPRE12_DIV128
+#define RCC_ADC12PLLCLK_DIV256 RCC_CFGR2_ADCPRE12_DIV256
+
+#define IS_RCC_ADC12PLLCLK_DIV(ADCCLK) (((ADCCLK) == RCC_ADC12PLLCLK_OFF) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV1) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV2) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV4) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV6) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV8) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV10) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV12) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV16) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV32) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV64) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV128) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV256))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2S_Clock_Source RCC Extended I2S Clock Source
+ * @{
+ */
+#define RCC_I2SCLKSOURCE_SYSCLK RCC_CFGR_I2SSRC_SYSCLK
+#define RCC_I2SCLKSOURCE_EXT RCC_CFGR_I2SSRC_EXT
+
+#define IS_RCC_I2SCLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SCLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_I2SCLKSOURCE_EXT))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM1_Clock_Source RCC Extended TIM1 Clock Source
+ * @{
+ */
+#define RCC_TIM1CLK_HCLK RCC_CFGR3_TIM1SW_HCLK
+#define RCC_TIM1CLK_PLLCLK RCC_CFGR3_TIM1SW_PLL
+
+#define IS_RCC_TIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM1CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM1CLK_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM2_Clock_Source RCC Extended TIM2 Clock Source
+ * @{
+ */
+#define RCC_TIM2CLK_HCLK RCC_CFGR3_TIM2SW_HCLK
+#define RCC_TIM2CLK_PLLCLK RCC_CFGR3_TIM2SW_PLL
+
+#define IS_RCC_TIM2CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM2CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM2CLK_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM34_Clock_Source RCC Extended TIM3 & TIM4 Clock Source
+ * @{
+ */
+#define RCC_TIM34CLK_HCLK RCC_CFGR3_TIM34SW_HCLK
+#define RCC_TIM34CLK_PLLCLK RCC_CFGR3_TIM34SW_PLL
+
+#define IS_RCC_TIM3CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM34CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM34CLK_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM15_Clock_Source RCC Extended TIM15 Clock Source
+ * @{
+ */
+#define RCC_TIM15CLK_HCLK RCC_CFGR3_TIM15SW_HCLK
+#define RCC_TIM15CLK_PLLCLK RCC_CFGR3_TIM15SW_PLL
+
+#define IS_RCC_TIM15CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM15CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM15CLK_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM16_Clock_Source RCC Extended TIM16 Clock Source
+ * @{
+ */
+#define RCC_TIM16CLK_HCLK RCC_CFGR3_TIM16SW_HCLK
+#define RCC_TIM16CLK_PLLCLK RCC_CFGR3_TIM16SW_PLL
+
+#define IS_RCC_TIM16CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM16CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM16CLK_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM17_Clock_Source RCC Extended TIM17 Clock Source
+ * @{
+ */
+#define RCC_TIM17CLK_HCLK RCC_CFGR3_TIM17SW_HCLK
+#define RCC_TIM17CLK_PLLCLK RCC_CFGR3_TIM17SW_PLL
+
+#define IS_RCC_TIM17CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM17CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM17CLK_PLLCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_UART4_Clock_Source RCC Extended UART4 Clock Source
+ * @{
+ */
+#define RCC_UART4CLKSOURCE_PCLK1 RCC_CFGR3_UART4SW_PCLK
+#define RCC_UART4CLKSOURCE_SYSCLK RCC_CFGR3_UART4SW_SYSCLK
+#define RCC_UART4CLKSOURCE_LSE RCC_CFGR3_UART4SW_LSE
+#define RCC_UART4CLKSOURCE_HSI RCC_CFGR3_UART4SW_HSI
+
+#define IS_RCC_UART4CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART4CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_UART4CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_UART5_Clock_Source RCC Extended UART5 Clock Source
+ * @{
+ */
+#define RCC_UART5CLKSOURCE_PCLK1 RCC_CFGR3_UART5SW_PCLK
+#define RCC_UART5CLKSOURCE_SYSCLK RCC_CFGR3_UART5SW_SYSCLK
+#define RCC_UART5CLKSOURCE_LSE RCC_CFGR3_UART5SW_LSE
+#define RCC_UART5CLKSOURCE_HSI RCC_CFGR3_UART5SW_HSI
+
+#define IS_RCC_UART5CLKSOURCE(SOURCE) (((SOURCE) == RCC_UART5CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_UART5CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+/** @defgroup RCCEx_TIM20_Clock_Source RCC Extended TIM20 Clock Source
+ * @{
+ */
+#define RCC_TIM20CLK_HCLK RCC_CFGR3_TIM20SW_HCLK
+#define RCC_TIM20CLK_PLLCLK RCC_CFGR3_TIM20SW_PLL
+
+#define IS_RCC_TIM20CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM20CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM20CLK_PLLCLK))
+/**
+ * @}
+ */
+#endif /* STM32F303xE || STM32F398xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx)
+
+/** @defgroup RCCEx_ADC34_Clock_Source RCC Extended ADC34 Clock Source
+ * @{
+ */
+
+/* ADC3 & ADC4 */
+#define RCC_ADC34PLLCLK_OFF RCC_CFGR2_ADCPRE34_NO
+#define RCC_ADC34PLLCLK_DIV1 RCC_CFGR2_ADCPRE34_DIV1
+#define RCC_ADC34PLLCLK_DIV2 RCC_CFGR2_ADCPRE34_DIV2
+#define RCC_ADC34PLLCLK_DIV4 RCC_CFGR2_ADCPRE34_DIV4
+#define RCC_ADC34PLLCLK_DIV6 RCC_CFGR2_ADCPRE34_DIV6
+#define RCC_ADC34PLLCLK_DIV8 RCC_CFGR2_ADCPRE34_DIV8
+#define RCC_ADC34PLLCLK_DIV10 RCC_CFGR2_ADCPRE34_DIV10
+#define RCC_ADC34PLLCLK_DIV12 RCC_CFGR2_ADCPRE34_DIV12
+#define RCC_ADC34PLLCLK_DIV16 RCC_CFGR2_ADCPRE34_DIV16
+#define RCC_ADC34PLLCLK_DIV32 RCC_CFGR2_ADCPRE34_DIV32
+#define RCC_ADC34PLLCLK_DIV64 RCC_CFGR2_ADCPRE34_DIV64
+#define RCC_ADC34PLLCLK_DIV128 RCC_CFGR2_ADCPRE34_DIV128
+#define RCC_ADC34PLLCLK_DIV256 RCC_CFGR2_ADCPRE34_DIV256
+
+#define IS_RCC_ADC34PLLCLK_DIV(ADCCLK) (((ADCCLK) == RCC_ADC34PLLCLK_OFF) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV1) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV2) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV4) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV6) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV8) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV10) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV12) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV16) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV32) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV64) || ((ADCCLK) == RCC_ADC34PLLCLK_DIV128) || \
+ ((ADCCLK) == RCC_ADC34PLLCLK_DIV256))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM8_Clock_Source RCC Extended TIM8 Clock Source
+ * @{
+ */
+#define RCC_TIM8CLK_HCLK RCC_CFGR3_TIM8SW_HCLK
+#define RCC_TIM8CLK_PLLCLK RCC_CFGR3_TIM8SW_PLL
+
+#define IS_RCC_TIM8CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM8CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM8CLK_PLLCLK))
+/**
+ * @}
+ */
+
+#endif /* STM32F303xC || STM32F303xE || STM32F398xx || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+
+/** @defgroup RCCEx_USART1_Clock_Source RCC Extended USART1 Clock Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK1 RCC_CFGR3_USART1SW_PCLK
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK1) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADC12_Clock_Source RCC Extended ADC12 Clock Source
+ * @{
+ */
+/* ADC1 & ADC2 */
+#define RCC_ADC12PLLCLK_OFF RCC_CFGR2_ADCPRE12_NO
+#define RCC_ADC12PLLCLK_DIV1 RCC_CFGR2_ADCPRE12_DIV1
+#define RCC_ADC12PLLCLK_DIV2 RCC_CFGR2_ADCPRE12_DIV2
+#define RCC_ADC12PLLCLK_DIV4 RCC_CFGR2_ADCPRE12_DIV4
+#define RCC_ADC12PLLCLK_DIV6 RCC_CFGR2_ADCPRE12_DIV6
+#define RCC_ADC12PLLCLK_DIV8 RCC_CFGR2_ADCPRE12_DIV8
+#define RCC_ADC12PLLCLK_DIV10 RCC_CFGR2_ADCPRE12_DIV10
+#define RCC_ADC12PLLCLK_DIV12 RCC_CFGR2_ADCPRE12_DIV12
+#define RCC_ADC12PLLCLK_DIV16 RCC_CFGR2_ADCPRE12_DIV16
+#define RCC_ADC12PLLCLK_DIV32 RCC_CFGR2_ADCPRE12_DIV32
+#define RCC_ADC12PLLCLK_DIV64 RCC_CFGR2_ADCPRE12_DIV64
+#define RCC_ADC12PLLCLK_DIV128 RCC_CFGR2_ADCPRE12_DIV128
+#define RCC_ADC12PLLCLK_DIV256 RCC_CFGR2_ADCPRE12_DIV256
+
+#define IS_RCC_ADC12PLLCLK_DIV(ADCCLK) (((ADCCLK) == RCC_ADC12PLLCLK_OFF) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV1) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV2) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV4) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV6) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV8) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV10) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV12) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV16) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV32) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV64) || ((ADCCLK) == RCC_ADC12PLLCLK_DIV128) || \
+ ((ADCCLK) == RCC_ADC12PLLCLK_DIV256))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIM1_Clock_Source RCC Extended TIM1 Clock Source
+ * @{
+ */
+#define RCC_TIM1CLK_HCLK RCC_CFGR3_TIM1SW_HCLK
+#define RCC_TIM1CLK_PLLCLK RCC_CFGR3_TIM1SW_PLL
+
+#define IS_RCC_TIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_TIM1CLK_HCLK) || \
+ ((SOURCE) == RCC_TIM1CLK_PLLCLK))
+/**
+ * @}
+ */
+
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+
+/** @defgroup RCCEx_HRTIM1_Clock_Source RCC Extended HRTIM1 Clock Source
+ * @{
+ */
+#define RCC_HRTIM1CLK_HCLK RCC_CFGR3_HRTIM1SW_HCLK
+#define RCC_HRTIM1CLK_PLLCLK RCC_CFGR3_HRTIM1SW_PLL
+
+#define IS_RCC_HRTIM1CLKSOURCE(SOURCE) (((SOURCE) == RCC_HRTIM1CLK_HCLK) || \
+ ((SOURCE) == RCC_HRTIM1CLK_PLLCLK))
+/**
+ * @}
+ */
+
+#endif /* STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+
+/** @defgroup RCCEx_USART1_Clock_Source RCC Extended USART1 Clock Source
+ * @{
+ */
+#define RCC_USART1CLKSOURCE_PCLK2 RCC_CFGR3_USART1SW_PCLK
+#define RCC_USART1CLKSOURCE_SYSCLK RCC_CFGR3_USART1SW_SYSCLK
+#define RCC_USART1CLKSOURCE_LSE RCC_CFGR3_USART1SW_LSE
+#define RCC_USART1CLKSOURCE_HSI RCC_CFGR3_USART1SW_HSI
+
+#define IS_RCC_USART1CLKSOURCE(SOURCE) (((SOURCE) == RCC_USART1CLKSOURCE_PCLK2) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_SYSCLK) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_LSE) || \
+ ((SOURCE) == RCC_USART1CLKSOURCE_HSI))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2C2_Clock_Source RCC Extended I2C2 Clock Source
+ * @{
+ */
+#define RCC_I2C2CLKSOURCE_HSI RCC_CFGR3_I2C2SW_HSI
+#define RCC_I2C2CLKSOURCE_SYSCLK RCC_CFGR3_I2C2SW_SYSCLK
+
+#define IS_RCC_I2C2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2C2CLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_I2C2CLKSOURCE_SYSCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADC1_Clock_Source RCC Extended ADC1 Clock Source
+ * @{
+ */
+
+/* ADC1 */
+#define RCC_ADC1PCLK2_DIV2 RCC_CFGR_ADCPRE_DIV2
+#define RCC_ADC1PCLK2_DIV4 RCC_CFGR_ADCPRE_DIV4
+#define RCC_ADC1PCLK2_DIV6 RCC_CFGR_ADCPRE_DIV6
+#define RCC_ADC1PCLK2_DIV8 RCC_CFGR_ADCPRE_DIV8
+
+#define IS_RCC_ADC1PCLK2_DIV(ADCCLK) (((ADCCLK) == RCC_ADC1PCLK2_DIV2) || ((ADCCLK) == RCC_ADC1PCLK2_DIV4) || \
+ ((ADCCLK) == RCC_ADC1PCLK2_DIV6) || ((ADCCLK) == RCC_ADC1PCLK2_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CEC_Clock_Source RCC Extended CEC Clock Source
+ * @{
+ */
+#define RCC_CECCLKSOURCE_HSI RCC_CFGR3_CECSW_HSI_DIV244
+#define RCC_CECCLKSOURCE_LSE RCC_CFGR3_CECSW_LSE
+
+#define IS_RCC_CECCLKSOURCE(SOURCE) (((SOURCE) == RCC_CECCLKSOURCE_HSI) || \
+ ((SOURCE) == RCC_CECCLKSOURCE_LSE))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SDADC_Clock_Prescaler RCC Extended SDADC Clock Prescaler
+ * @{
+ */
+#define RCC_SDADCSYSCLK_DIV1 RCC_CFGR_SDADCPRE_DIV1
+#define RCC_SDADCSYSCLK_DIV2 RCC_CFGR_SDADCPRE_DIV2
+#define RCC_SDADCSYSCLK_DIV4 RCC_CFGR_SDADCPRE_DIV4
+#define RCC_SDADCSYSCLK_DIV6 RCC_CFGR_SDADCPRE_DIV6
+#define RCC_SDADCSYSCLK_DIV8 RCC_CFGR_SDADCPRE_DIV8
+#define RCC_SDADCSYSCLK_DIV10 RCC_CFGR_SDADCPRE_DIV10
+#define RCC_SDADCSYSCLK_DIV12 RCC_CFGR_SDADCPRE_DIV12
+#define RCC_SDADCSYSCLK_DIV14 RCC_CFGR_SDADCPRE_DIV14
+#define RCC_SDADCSYSCLK_DIV16 RCC_CFGR_SDADCPRE_DIV16
+#define RCC_SDADCSYSCLK_DIV20 RCC_CFGR_SDADCPRE_DIV20
+#define RCC_SDADCSYSCLK_DIV24 RCC_CFGR_SDADCPRE_DIV24
+#define RCC_SDADCSYSCLK_DIV28 RCC_CFGR_SDADCPRE_DIV28
+#define RCC_SDADCSYSCLK_DIV32 RCC_CFGR_SDADCPRE_DIV32
+#define RCC_SDADCSYSCLK_DIV36 RCC_CFGR_SDADCPRE_DIV36
+#define RCC_SDADCSYSCLK_DIV40 RCC_CFGR_SDADCPRE_DIV40
+#define RCC_SDADCSYSCLK_DIV44 RCC_CFGR_SDADCPRE_DIV44
+#define RCC_SDADCSYSCLK_DIV48 RCC_CFGR_SDADCPRE_DIV48
+
+#define IS_RCC_SDADCSYSCLK_DIV(DIV) (((DIV) == RCC_SDADCSYSCLK_DIV1) || ((DIV) == RCC_SDADCSYSCLK_DIV2) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV4) || ((DIV) == RCC_SDADCSYSCLK_DIV6) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV8) || ((DIV) == RCC_SDADCSYSCLK_DIV10) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV12) || ((DIV) == RCC_SDADCSYSCLK_DIV14) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV16) || ((DIV) == RCC_SDADCSYSCLK_DIV20) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV24) || ((DIV) == RCC_SDADCSYSCLK_DIV28) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV32) || ((DIV) == RCC_SDADCSYSCLK_DIV36) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV40) || ((DIV) == RCC_SDADCSYSCLK_DIV44) || \
+ ((DIV) == RCC_SDADCSYSCLK_DIV48))
+/**
+ * @}
+ */
+
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F302x8) || \
+ defined(STM32F373xC)
+/** @defgroup RCCEx_USB_Clock_Source RCC Extended USB Clock Source
+ * @{
+ */
+#define RCC_USBPLLCLK_DIV1 RCC_CFGR_USBPRE_DIV1
+#define RCC_USBPLLCLK_DIV1_5 RCC_CFGR_USBPRE_DIV1_5
+
+#define IS_RCC_USBCLKSOURCE(SOURCE) (((SOURCE) == RCC_USBPLLCLK_DIV1) || \
+ ((SOURCE) == RCC_USBPLLCLK_DIV1_5))
+/**
+ * @}
+ */
+
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F302x8 || */
+ /* STM32F373xC */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup RCCEx_MCOx_Clock_Prescaler RCC Extended MCOx Clock Prescaler
+ * @{
+ */
+#define RCC_MCO_NODIV ((uint32_t)0x00000000)
+
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCO_NODIV))
+/**
+ * @}
+ */
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+/** @defgroup RCCEx_MCOx_Clock_Prescaler RCC Extended MCOx Clock Prescaler
+ * @{
+ */
+#define RCC_MCO_DIV1 ((uint32_t)0x00000000)
+#define RCC_MCO_DIV2 ((uint32_t)0x10000000)
+#define RCC_MCO_DIV4 ((uint32_t)0x20000000)
+#define RCC_MCO_DIV8 ((uint32_t)0x30000000)
+#define RCC_MCO_DIV16 ((uint32_t)0x40000000)
+#define RCC_MCO_DIV32 ((uint32_t)0x50000000)
+#define RCC_MCO_DIV64 ((uint32_t)0x60000000)
+#define RCC_MCO_DIV128 ((uint32_t)0x70000000)
+
+#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCO_DIV1) || ((DIV) == RCC_MCO_DIV2) || \
+ ((DIV) == RCC_MCO_DIV4) || ((DIV) == RCC_MCO_DIV8) || \
+ ((DIV) == RCC_MCO_DIV16) || ((DIV) == RCC_MCO_DIV32) || \
+ ((DIV) == RCC_MCO_DIV64) || ((DIV) == RCC_MCO_DIV128))
+/**
+ * @}
+ */
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RCCEx_Exported_Macros RCC Extended Exported Macros
+ * @{
+ */
+
+/** @defgroup RCCEx_PLL_Configuration RCC Extended PLL Configuration
+ * @{
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+/** @brief Macro to configure the PLL clock source, multiplication and division factors.
+ * @note This macro must be used only when the PLL is disabled.
+ *
+ * @param __RCC_PLLSource__: specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
+ * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+ * @param __PREDIV__: specifies the predivider factor for PLL VCO input clock
+ * This parameter must be a number between RCC_PREDIV_DIV1 and RCC_PREDIV_DIV16.
+ * @param __PLLMUL__: specifies the multiplication factor for PLL VCO input clock
+ * This parameter must be a number between RCC_PLL_MUL2 and RCC_PLL_MUL16.
+ *
+ */
+#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__ , __PREDIV__, __PLLMUL__) \
+ do { \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (__PREDIV__)); \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLMUL | RCC_CFGR_PLLSRC, (uint32_t)((__PLLMUL__)|(__RCC_PLLSource__))); \
+ } while(0)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+/** @brief Macro to configure the PLL clock source and multiplication factor.
+ * @note This macro must be used only when the PLL is disabled.
+ *
+ * @param __RCC_PLLSource__: specifies the PLL entry clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry
+ * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry
+ * @param __PLLMUL__: specifies the multiplication factor for PLL VCO input clock
+ * This parameter must be a number between RCC_PLL_MUL2 and RCC_PLL_MUL16.
+ *
+ */
+#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__ , __PLLMUL__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLMUL | RCC_CFGR_PLLSRC, (uint32_t)((__PLLMUL__)|(__RCC_PLLSource__)))
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+ /* STM32F373xC || STM32F378xx */
+/**
+ * @}
+ */
+
+#if defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup RCCEx_HSE_Configuration RCC Extended HSE Configuration
+ * @{
+ */
+
+/**
+ * @brief Macro to configure the External High Speed oscillator (HSE) Predivision factor for PLL.
+ * @note Predivision factor can not be changed if PLL is used as system clock
+ * In this case, you have to select another source of the system clock, disable the PLL and
+ * then change the HSE predivision factor.
+ * @param __HSEPredivValue__: specifies the division value applied to HSE.
+ * This parameter must be a number between RCC_HSE_PREDIV_DIV1 and RCC_HSE_PREDIV_DIV16.
+ */
+#define __HAL_RCC_HSE_PREDIV_CONFIG(__HSEPredivValue__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (uint32_t)(__HSEPredivValue__))
+/**
+ * @}
+ */
+#endif /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+ /* STM32F373xC || STM32F378xx */
+
+/** @defgroup RCCEx_AHB_Clock_Enable_Disable RCC Extended AHB Clock Enable Disable
+ * @brief Enable or disable the AHB peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __ADC1_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_ADC1EN))
+
+#define __ADC1_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ADC1EN))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __DMA2_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_DMA2EN))
+#define __GPIOE_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOEEN))
+#define __ADC12_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_ADC12EN))
+/* Aliases for STM32 F3 compatibility */
+#define __ADC1_CLK_ENABLE() __ADC12_CLK_ENABLE()
+#define __ADC2_CLK_ENABLE() __ADC12_CLK_ENABLE()
+
+#define __DMA2_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA2EN))
+#define __GPIOE_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOEEN))
+#define __ADC12_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ADC12EN))
+/* Aliases for STM32 F3 compatibility */
+#define __ADC1_CLK_DISABLE() __ADC12_CLK_DISABLE()
+#define __ADC2_CLK_DISABLE() __ADC12_CLK_DISABLE()
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx)
+#define __ADC34_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_ADC34EN))
+
+#define __ADC34_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ADC34EN))
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __ADC12_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_ADC12EN))
+/* Aliases for STM32 F3 compatibility */
+#define __ADC1_CLK_ENABLE() __ADC12_CLK_ENABLE()
+#define __ADC2_CLK_ENABLE() __ADC12_CLK_ENABLE()
+
+#define __ADC12_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_ADC12EN))
+/* Aliases for STM32 F3 compatibility */
+#define __ADC1_CLK_DISABLE() __ADC12_CLK_DISABLE()
+#define __ADC2_CLK_DISABLE() __ADC12_CLK_DISABLE()
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __DMA2_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_DMA2EN))
+#define __GPIOE_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOEEN))
+
+#define __DMA2_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA2EN))
+#define __GPIOE_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOEEN))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define __FMC_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_FMCEN))
+#define __GPIOG_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOGEN))
+#define __GPIOH_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOHEN))
+
+#define __FMC_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FMCEN))
+#define __GPIOG_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOGEN))
+#define __GPIOH_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_GPIOHEN))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Clock_Enable_Disable RCC Extended APB1 Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __SPI2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI2EN))
+#define __SPI3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI3EN))
+#define __I2C2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C2EN))
+#define __I2C3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C3EN))
+
+#define __SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+#define __SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+#define __I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __TIM3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM3EN))
+#define __TIM4_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM4EN))
+#define __SPI2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI2EN))
+#define __SPI3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI3EN))
+#define __UART4_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART4EN))
+#define __UART5_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_UART5EN))
+#define __I2C2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C2EN))
+
+#define __TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+#define __SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN))
+#define __UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN))
+#define __I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __TIM3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM3EN))
+#define __DAC2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_DAC2EN))
+
+#define __TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __DAC2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DAC2EN))
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __TIM3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM3EN))
+#define __TIM4_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM4EN))
+#define __TIM5_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM5EN))
+#define __TIM12_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM12EN))
+#define __TIM13_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM13EN))
+#define __TIM14_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM14EN))
+#define __TIM18_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM18EN))
+#define __SPI2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI2EN))
+#define __SPI3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_SPI3EN))
+#define __I2C2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C2EN))
+#define __DAC2_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_DAC2EN))
+#define __CEC_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CECEN))
+
+#define __TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN))
+#define __TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN))
+#define __TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN))
+#define __TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN))
+#define __TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN))
+#define __TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN))
+#define __TIM18_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM18EN))
+#define __SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN))
+#define __SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN))
+#define __I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN))
+#define __DAC2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DAC2EN))
+#define __CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+#define __TIM7_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM7EN))
+
+#define __TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN))
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F302x8) || \
+ defined(STM32F373xC)
+#define __USB_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_USBEN))
+
+#define __USB_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USBEN))
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F302x8 || */
+ /* STM32F373xC */
+
+#if !defined(STM32F301x8)
+#define __CAN_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_CANEN))
+
+#define __CAN_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CANEN))
+#endif /* STM32F301x8*/
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define __I2C3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_I2C3EN))
+
+#define __I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Clock_Enable_Disable RCC Extended APB2 Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+ * @note After reset, the peripheral clock (used for registers read/write access)
+ * is disabled and the application software has to enable this clock before
+ * using it.
+ * @{
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __SPI1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI1EN))
+
+#define __SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx)
+#define __TIM8_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM8EN))
+
+#define __TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN))
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __SPI1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI1EN))
+
+#define __SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+#define __HRTIM1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_HRTIM1EN))
+
+#define __HRTIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_HRTIM1EN))
+#endif /* STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __ADC1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_ADC1EN))
+#define __SPI1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI1EN))
+#define __TIM19_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM19EN))
+#define __SDADC1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SDADC1EN))
+#define __SDADC2_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SDADC2EN))
+#define __SDADC3_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SDADC3EN))
+
+#define __ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN))
+#define __SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN))
+#define __TIM19_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM19EN))
+#define __SDADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDADC1EN))
+#define __SDADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDADC2EN))
+#define __SDADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDADC3EN))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __TIM1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM1EN))
+
+#define __TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define __SPI4_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SPI4EN))
+
+#define __SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+#define __TIM20_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_TIM20EN))
+
+#define __TIM20_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM20EN))
+#endif /* STM32F303xE || STM32F398xx */
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_AHB_Force_Release_Reset RCC Extended AHB Force Release Reset
+ * @brief Force or release AHB peripheral reset.
+ * @{
+ */
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __ADC1_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_ADC1RST))
+
+#define __ADC1_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_ADC1RST))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __GPIOE_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOERST))
+#define __ADC12_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_ADC12RST))
+/* Aliases for STM32 F3 compatibility */
+#define __ADC1_FORCE_RESET() __ADC12_FORCE_RESET()
+#define __ADC2_FORCE_RESET() __ADC12_FORCE_RESET()
+
+#define __GPIOE_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOERST))
+#define __ADC12_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_ADC12RST))
+/* Aliases for STM32 F3 compatibility */
+#define __ADC1_RELEASE_RESET() __ADC12_RELEASE_RESET()
+#define __ADC2_RELEASE_RESET() __ADC12_RELEASE_RESET()
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx)
+#define __ADC34_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_ADC34RST))
+
+#define __ADC34_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_ADC34RST))
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __ADC12_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_ADC12RST))
+/* Aliases for STM32 F3 compatibility */
+#define __ADC1_FORCE_RESET() __ADC12_FORCE_RESET()
+#define __ADC2_FORCE_RESET() __ADC12_FORCE_RESET()
+
+#define __ADC12_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_ADC12RST))
+/* Aliases for STM32 F3 compatibility */
+#define __ADC1_RELEASE_RESET() __ADC12_RELEASE_RESET()
+#define __ADC2_RELEASE_RESET() __ADC12_RELEASE_RESET()
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __GPIOE_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOERST))
+
+#define __GPIOE_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOERST))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define __FMC_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_FMCRST))
+#define __GPIOG_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOGRST))
+#define __GPIOH_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOHRST))
+
+#define __FMC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_FMCRST))
+#define __GPIOG_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOGRST))
+#define __GPIOH_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOHRST))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB1_Force_Release_Reset RCC Extended APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+#define __SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+#define __I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
+
+#define __SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+#define __SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+#define __I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+#define __SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST))
+#define __UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST))
+#define __I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+
+#define __TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+#define __SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST))
+#define __UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST))
+#define __I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __DAC2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DAC2RST))
+
+#define __TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __DAC2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DAC2RST))
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
+#define __TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST))
+#define __TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST))
+#define __TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST))
+#define __TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST))
+#define __TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
+#define __TIM18_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM18RST))
+#define __SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST))
+#define __SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST))
+#define __I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST))
+#define __DAC2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DAC2RST))
+#define __CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST))
+
+#define __TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST))
+#define __TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST))
+#define __TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST))
+#define __TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST))
+#define __TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST))
+#define __TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST))
+#define __TIM18_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM18RST))
+#define __SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST))
+#define __SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST))
+#define __I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST))
+#define __DAC2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DAC2RST))
+#define __CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+#define __TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST))
+
+#define __TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST))
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F302x8) || \
+ defined(STM32F373xC)
+#define __USB_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USBRST))
+
+#define __USB_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USBRST))
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F302x8 || */
+ /* STM32F373xC */
+
+#if !defined(STM32F301x8)
+#define __CAN_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CANRST))
+
+#define __CAN_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CANRST))
+#endif /* STM32F301x8*/
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define __I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST))
+
+#define __I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_APB2_Force_Release_Reset RCC Extended APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+
+#define __SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx)
+#define __TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST))
+
+#define __TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST))
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+
+#define __SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+#define __HRTIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_HRTIM1RST))
+
+#define __HRTIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_HRTIM1RST))
+#endif /* STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define __ADC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC1RST))
+#define __SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST))
+#define __TIM19_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM19RST))
+#define __SDADC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDADC1RST))
+#define __SDADC2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDADC2RST))
+#define __SDADC3_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDADC3RST))
+
+#define __ADC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADC1RST))
+#define __SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST))
+#define __TIM19_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM19RST))
+#define __SDADC1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDADC1RST))
+#define __SDADC2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDADC2RST))
+#define __SDADC3_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDADC3RST))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST))
+
+#define __TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+#define __SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST))
+
+#define __SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+#define __TIM20_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM20RST))
+
+#define __TIM20_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM20RST))
+#endif /* STM32F303xE || STM32F398xx */
+
+/**
+ * @}
+ */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/** @defgroup RCCEx_I2Cx_Clock_Config RCC Extended I2Cx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the I2C2 clock (I2C2CLK).
+ * @param __I2C2CLKSource__: specifies the I2C2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock
+ * @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_I2C2_CONFIG(__I2C2CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C2SW, (uint32_t)(__I2C2CLKSource__))
+
+/** @brief Macro to get the I2C2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock
+ * @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_GET_I2C2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C2SW)))
+
+/** @brief Macro to configure the I2C3 clock (I2C3CLK).
+ * @param __I2C3CLKSource__: specifies the I2C3 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2C3CLKSOURCE_HSI: HSI selected as I2C3 clock
+ * @arg RCC_I2C3CLKSOURCE_SYSCLK: System Clock selected as I2C3 clock
+ */
+#define __HAL_RCC_I2C3_CONFIG(__I2C3CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C3SW, (uint32_t)(__I2C3CLKSource__))
+
+/** @brief Macro to get the I2C3 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2C3CLKSOURCE_HSI: HSI selected as I2C3 clock
+ * @arg RCC_I2C3CLKSOURCE_SYSCLK: System Clock selected as I2C3 clock
+ */
+#define __HAL_RCC_GET_I2C3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C3SW)))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIMx_Clock_Config RCC Extended TIMx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the TIM1 clock (TIM1CLK).
+ * @param __TIM1CLKSource__: specifies the TIM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM1CLKSOURCE_HCLK: HCLK selected as TIM1 clock
+ * @arg RCC_TIM1CLKSOURCE_PLL: PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_TIM1_CONFIG(__TIM1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM1SW, (uint32_t)(__TIM1CLKSource__))
+
+/** @brief Macro to get the TIM1 clock (TIM1CLK).
+ * @retval The clock source can be one of the following values:
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM1CLKSOURCE_HCLK: HCLK selected as TIM1 clock
+ * @arg RCC_TIM1CLKSOURCE_PLL: PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_GET_TIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM1SW)))
+
+/** @brief Macro to configure the TIM15 clock (TIM15CLK).
+ * @param __TIM15CLKSource__: specifies the TIM15 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM15CLKSOURCE_HCLK: HCLK selected as TIM15 clock
+ * @arg RCC_TIM15CLKSOURCE_PLL: PLL Clock selected as TIM15 clock
+ */
+#define __HAL_RCC_TIM15_CONFIG(__TIM15CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM15SW, (uint32_t)(__TIM15CLKSource__))
+
+/** @brief Macro to get the TIM15 clock (TIM15CLK).
+ * @retval The clock source can be one of the following values:
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM15CLKSOURCE_HCLK: HCLK selected as TIM15 clock
+ * @arg RCC_TIM15CLKSOURCE_PLL: PLL Clock selected as TIM15 clock
+ */
+#define __HAL_RCC_GET_TIM15_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM15SW)))
+
+/** @brief Macro to configure the TIM16 clock (TIM16CLK).
+ * @param __TIM16CLKSource__: specifies the TIM16 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM16CLKSOURCE_HCLK: HCLK selected as TIM16 clock
+ * @arg RCC_TIM16CLKSOURCE_PLL: PLL Clock selected as TIM16 clock
+ */
+#define __HAL_RCC_TIM16_CONFIG(__TIM16CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM16SW, (uint32_t)(__TIM16CLKSource__))
+
+/** @brief Macro to get the TIM16 clock (TIM16CLK).
+ * @retval The clock source can be one of the following values:
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM16CLKSOURCE_HCLK: HCLK selected as TIM16 clock
+ * @arg RCC_TIM16CLKSOURCE_PLL: PLL Clock selected as TIM16 clock
+ */
+#define __HAL_RCC_GET_TIM16_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM16SW)))
+
+/** @brief Macro to configure the TIM17 clock (TIM17CLK).
+ * @param __TIM17CLKSource__: specifies the TIM17 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM17CLKSOURCE_HCLK: HCLK selected as TIM17 clock
+ * @arg RCC_TIM17CLKSOURCE_PLL: PLL Clock selected as TIM17 clock
+ */
+#define __HAL_RCC_TIM17_CONFIG(__TIM17CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM17SW, (uint32_t)(__TIM17CLKSource__))
+
+/** @brief Macro to get the TIM17 clock (TIM17CLK).
+ * @retval The clock source can be one of the following values:
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM17CLKSOURCE_HCLK: HCLK selected as TIM17 clock
+ * @arg RCC_TIM17CLKSOURCE_PLL: PLL Clock selected as TIM17 clock
+ */
+#define __HAL_RCC_GET_TIM17_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM17SW)))
+
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2Sx_Clock_Config RCC Extended I2Sx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the I2S clock source (I2SCLK).
+ * @note This function must be called before enabling the I2S APB clock.
+ * @param __I2SCLKSource__: specifies the I2S clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2SCLKSOURCE_SYSCLK: SYSCLK clock used as I2S clock source
+ * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source
+ */
+#define __HAL_RCC_I2S_CONFIG(__I2SCLKSource__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_I2SSRC, (uint32_t)(__I2SCLKSource__))
+
+/** @brief Macro to get the I2S clock source (I2SCLK).
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2SCLKSOURCE_SYSCLK: SYSCLK clock used as I2S clock source
+ * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source
+ */
+#define __HAL_RCC_GET_I2S_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_I2SSRC)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADCx_Clock_Config RCC Extended ADCx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the ADC1 clock (ADC1CLK).
+ * @param __ADC1CLKSource__: specifies the ADC1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_ADC1PLLCLK_OFF: ADC1 PLL clock disabled, ADC1 can use AHB clock
+ * @arg RCC_ADC1PLLCLK_DIV1: PLL clock divided by 1 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV2: PLL clock divided by 2 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV4: PLL clock divided by 4 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV6: PLL clock divided by 6 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV8: PLL clock divided by 8 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV10: PLL clock divided by 10 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV12: PLL clock divided by 12 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV16: PLL clock divided by 16 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV32: PLL clock divided by 32 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV64: PLL clock divided by 64 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV128: PLL clock divided by 128 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV256: PLL clock divided by 256 selected as ADC1 clock
+ */
+#define __HAL_RCC_ADC1_CONFIG(__ADC1CLKSource__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_ADC1PRES, (uint32_t)(__ADC1CLKSource__))
+
+/** @brief Macro to get the ADC1 clock
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_ADC1PLLCLK_OFF: ADC1 PLL clock disabled, ADC1 can use AHB clock
+ * @arg RCC_ADC1PLLCLK_DIV1: PLL clock divided by 1 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV2: PLL clock divided by 2 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV4: PLL clock divided by 4 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV6: PLL clock divided by 6 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV8: PLL clock divided by 8 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV10: PLL clock divided by 10 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV12: PLL clock divided by 12 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV16: PLL clock divided by 16 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV32: PLL clock divided by 32 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV64: PLL clock divided by 64 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV128: PLL clock divided by 128 selected as ADC1 clock
+ * @arg RCC_ADC1PLLCLK_DIV256: PLL clock divided by 256 selected as ADC1 clock
+ */
+#define __HAL_RCC_GET_ADC1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_ADC1PRES)))
+/**
+ * @}
+ */
+
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+/** @defgroup RCCEx_I2Cx_Clock_Config RCC Extended I2Cx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the I2C2 clock (I2C2CLK).
+ * @param __I2C2CLKSource__: specifies the I2C2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock
+ * @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_I2C2_CONFIG(__I2C2CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C2SW, (uint32_t)(__I2C2CLKSource__))
+
+/** @brief Macro to get the I2C2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock
+ * @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_GET_I2C2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C2SW)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADCx_Clock_Config RCC Extended ADCx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the ADC1 & ADC2 clock (ADC12CLK).
+ * @param __ADC12CLKSource__: specifies the ADC1 & ADC2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_ADC12PLLCLK_OFF: ADC1 & ADC2 PLL clock disabled, ADC1 & ADC2 can use AHB clock
+ * @arg RCC_ADC12PLLCLK_DIV1: PLL clock divided by 1 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV2: PLL clock divided by 2 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV4: PLL clock divided by 4 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV6: PLL clock divided by 6 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV8: PLL clock divided by 8 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV10: PLL clock divided by 10 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV12: PLL clock divided by 12 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV16: PLL clock divided by 16 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV32: PLL clock divided by 32 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV64: PLL clock divided by 64 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV128: PLL clock divided by 128 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV256: PLL clock divided by 256 selected as ADC1 & ADC2 clock
+ */
+#define __HAL_RCC_ADC12_CONFIG(__ADC12CLKSource__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_ADCPRE12, (uint32_t)(__ADC12CLKSource__))
+
+/** @brief Macro to get the ADC1 & ADC2 clock
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_ADC12PLLCLK_OFF: ADC1 & ADC2 PLL clock disabled, ADC1 & ADC2 can use AHB clock
+ * @arg RCC_ADC12PLLCLK_DIV1: PLL clock divided by 1 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV2: PLL clock divided by 2 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV4: PLL clock divided by 4 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV6: PLL clock divided by 6 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV8: PLL clock divided by 8 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV10: PLL clock divided by 10 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV12: PLL clock divided by 12 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV16: PLL clock divided by 16 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV32: PLL clock divided by 32 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV64: PLL clock divided by 64 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV128: PLL clock divided by 128 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV256: PLL clock divided by 256 selected as ADC1 & ADC2 clock
+ */
+#define __HAL_RCC_GET_ADC12_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_ADCPRE12)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIMx_Clock_Config RCC Extended TIMx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the TIM1 clock (TIM1CLK).
+ * @param __TIM1CLKSource__: specifies the TIM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM1CLKSOURCE_HCLK: HCLK selected as TIM1 clock
+ * @arg RCC_TIM1CLKSOURCE_PLL: PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_TIM1_CONFIG(__TIM1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM1SW, (uint32_t)(__TIM1CLKSource__))
+
+/** @brief Macro to get the TIM1 clock (TIM1CLK).
+ * @retval The clock source can be one of the following values:
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM1CLKSOURCE_HCLK: HCLK selected as TIM1 clock
+ * @arg RCC_TIM1CLKSOURCE_PLL: PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_GET_TIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM1SW)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_I2Sx_Clock_Config RCC Extended I2Sx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the I2S clock source (I2SCLK).
+ * @note This function must be called before enabling the I2S APB clock.
+ * @param __I2SCLKSource__: specifies the I2S clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2SCLKSOURCE_SYSCLK: SYSCLK clock used as I2S clock source
+ * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source
+ */
+#define __HAL_RCC_I2S_CONFIG(__I2SCLKSource__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_I2SSRC, (uint32_t)(__I2SCLKSource__))
+
+/** @brief Macro to get the I2S clock source (I2SCLK).
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2SCLKSOURCE_SYSCLK: SYSCLK clock used as I2S clock source
+ * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin
+ * used as I2S clock source
+ */
+#define __HAL_RCC_GET_I2S_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_I2SSRC)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_UARTx_Clock_Config RCC Extended UARTx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the UART4 clock (UART4CLK).
+ * @param __UART4CLKSource__: specifies the UART4 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_UART4CLKSOURCE_PCLK1: PCLK1 selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_HSI: HSI selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_SYSCLK: System Clock selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_LSE: LSE selected as UART4 clock
+ */
+#define __HAL_RCC_UART4_CONFIG(__UART4CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_UART4SW, (uint32_t)(__UART4CLKSource__))
+
+/** @brief Macro to get the UART4 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_UART4CLKSOURCE_PCLK1: PCLK1 selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_HSI: HSI selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_SYSCLK: System Clock selected as UART4 clock
+ * @arg RCC_UART4CLKSOURCE_LSE: LSE selected as UART4 clock
+ */
+#define __HAL_RCC_GET_UART4_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_UART4SW)))
+
+/** @brief Macro to configure the UART5 clock (UART5CLK).
+ * @param __UART5CLKSource__: specifies the UART5 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_UART5CLKSOURCE_PCLK1: PCLK1 selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_HSI: HSI selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_SYSCLK: System Clock selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_LSE: LSE selected as UART5 clock
+ */
+#define __HAL_RCC_UART5_CONFIG(__UART5CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_UART5SW, (uint32_t)(__UART5CLKSource__))
+
+/** @brief Macro to get the UART5 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_UART5CLKSOURCE_PCLK1: PCLK1 selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_HSI: HSI selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_SYSCLK: System Clock selected as UART5 clock
+ * @arg RCC_UART5CLKSOURCE_LSE: LSE selected as UART5 clock
+ */
+#define __HAL_RCC_GET_UART5_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_UART5SW)))
+/**
+ * @}
+ */
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx)
+/** @defgroup RCCEx_ADCx_Clock_Config RCC Extended ADCx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the ADC3 & ADC4 clock (ADC34CLK).
+ * @param __ADC34CLKSource__: specifies the ADC3 & ADC4 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_ADC34PLLCLK_OFF: ADC3 & ADC4 PLL clock disabled, ADC3 & ADC4 can use AHB clock
+ * @arg RCC_ADC34PLLCLK_DIV1: PLL clock divided by 1 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV2: PLL clock divided by 2 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV4: PLL clock divided by 4 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV6: PLL clock divided by 6 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV8: PLL clock divided by 8 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV10: PLL clock divided by 10 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV12: PLL clock divided by 12 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV16: PLL clock divided by 16 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV32: PLL clock divided by 32 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV64: PLL clock divided by 64 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV128: PLL clock divided by 128 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV256: PLL clock divided by 256 selected as ADC3 & ADC4 clock
+ */
+#define __HAL_RCC_ADC34_CONFIG(__ADC34CLKSource__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_ADCPRE34, (uint32_t)(__ADC34CLKSource__))
+
+/** @brief Macro to get the ADC3 & ADC4 clock
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_ADC34PLLCLK_OFF: ADC3 & ADC4 PLL clock disabled, ADC3 & ADC4 can use AHB clock
+ * @arg RCC_ADC34PLLCLK_DIV1: PLL clock divided by 1 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV2: PLL clock divided by 2 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV4: PLL clock divided by 4 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV6: PLL clock divided by 6 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV8: PLL clock divided by 8 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV10: PLL clock divided by 10 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV12: PLL clock divided by 12 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV16: PLL clock divided by 16 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV32: PLL clock divided by 32 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV64: PLL clock divided by 64 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV128: PLL clock divided by 128 selected as ADC3 & ADC4 clock
+ * @arg RCC_ADC34PLLCLK_DIV256: PLL clock divided by 256 selected as ADC3 & ADC4 clock
+ */
+#define __HAL_RCC_GET_ADC34_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_ADCPRE34)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIMx_Clock_Config RCC Extended TIMx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the TIM8 clock (TIM8CLK).
+ * @param __TIM8CLKSource__: specifies the TIM8 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM8CLKSOURCE_HCLK: HCLK selected as TIM8 clock
+ * @arg RCC_TIM8CLKSOURCE_PLL: PLL Clock selected as TIM8 clock
+ */
+#define __HAL_RCC_TIM8_CONFIG(__TIM8CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM8SW, (uint32_t)(__TIM8CLKSource__))
+
+/** @brief Macro to get the TIM8 clock (TIM8CLK).
+ * @retval The clock source can be one of the following values:
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM8CLKSOURCE_HCLK: HCLK selected as TIM8 clock
+ * @arg RCC_TIM8CLKSOURCE_PLL: PLL Clock selected as TIM8 clock
+ */
+#define __HAL_RCC_GET_TIM8_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM8SW)))
+
+/**
+ * @}
+ */
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+/** @defgroup RCCEx_ADCx_Clock_Config RCC Extended ADCx Clock Config
+ * @{
+ */
+
+/** @brief Macro to configure the ADC1 & ADC2 clock (ADC12CLK).
+ * @param __ADC12CLKSource__: specifies the ADC1 & ADC2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_ADC12PLLCLK_OFF: ADC1 & ADC2 PLL clock disabled, ADC1 & ADC2 can use AHB clock
+ * @arg RCC_ADC12PLLCLK_DIV1: PLL clock divided by 1 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV2: PLL clock divided by 2 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV4: PLL clock divided by 4 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV6: PLL clock divided by 6 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV8: PLL clock divided by 8 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV10: PLL clock divided by 10 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV12: PLL clock divided by 12 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV16: PLL clock divided by 16 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV32: PLL clock divided by 32 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV64: PLL clock divided by 64 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV128: PLL clock divided by 128 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV256: PLL clock divided by 256 selected as ADC1 & ADC2 clock
+ */
+#define __HAL_RCC_ADC12_CONFIG(__ADC12CLKSource__) \
+ MODIFY_REG(RCC->CFGR2, RCC_CFGR2_ADCPRE12, (uint32_t)(__ADC12CLKSource__))
+
+/** @brief Macro to get the ADC1 & ADC2 clock
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_ADC12PLLCLK_OFF: ADC1 & ADC2 PLL clock disabled, ADC1 & ADC2 can use AHB clock
+ * @arg RCC_ADC12PLLCLK_DIV1: PLL clock divided by 1 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV2: PLL clock divided by 2 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV4: PLL clock divided by 4 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV6: PLL clock divided by 6 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV8: PLL clock divided by 8 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV10: PLL clock divided by 10 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV12: PLL clock divided by 12 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV16: PLL clock divided by 16 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV32: PLL clock divided by 32 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV64: PLL clock divided by 64 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV128: PLL clock divided by 128 selected as ADC1 & ADC2 clock
+ * @arg RCC_ADC12PLLCLK_DIV256: PLL clock divided by 256 selected as ADC1 & ADC2 clock
+ */
+#define __HAL_RCC_GET_ADC12_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR2, RCC_CFGR2_ADCPRE12)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIMx_Clock_Config RCC Extended TIMx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the TIM1 clock (TIM1CLK).
+ * @param __TIM1CLKSource__: specifies the TIM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM1CLKSOURCE_HCLK: HCLK selected as TIM1 clock
+ * @arg RCC_TIM1CLKSOURCE_PLL: PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_TIM1_CONFIG(__TIM1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM1SW, (uint32_t)(__TIM1CLKSource__))
+
+/** @brief Macro to get the TIM1 clock (TIM1CLK).
+ * @retval The clock source can be one of the following values:
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM1CLKSOURCE_HCLK: HCLK selected as TIM1 clock
+ * @arg RCC_TIM1CLKSOURCE_PLL: PLL Clock selected as TIM1 clock
+ */
+#define __HAL_RCC_GET_TIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM1SW)))
+/**
+ * @}
+ */
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F334x8)
+/** @defgroup RCCEx_HRTIMx_Clock_Config RCC Extended HRTIMx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the HRTIM1 clock.
+ * @param __HRTIM1CLKSource__: specifies the HRTIM1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_HRTIM1CLKSOURCE_HCLK: HCLK selected as HRTIM1 clock
+ * @arg RCC_HRTIM1CLKSOURCE_PLL: PLL Clock selected as HRTIM1 clock
+ */
+#define __HAL_RCC_HRTIM1_CONFIG(__HRTIM1CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_HRTIM1SW, (uint32_t)(__HRTIM1CLKSource__))
+
+/** @brief Macro to get the HRTIM1 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_HRTIM1CLKSOURCE_HCLK: HCLK selected as HRTIM1 clock
+ * @arg RCC_HRTIM1CLKSOURCE_PLL: PLL Clock selected as HRTIM1 clock
+ */
+#define __HAL_RCC_GET_HRTIM1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_HRTIM1SW)))
+/**
+ * @}
+ */
+#endif /* STM32F334x8 */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup RCCEx_I2Cx_Clock_Config RCC Extended I2Cx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the I2C2 clock (I2C2CLK).
+ * @param __I2C2CLKSource__: specifies the I2C2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock
+ * @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_I2C2_CONFIG(__I2C2CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C2SW, (uint32_t)(__I2C2CLKSource__))
+
+/** @brief Macro to get the I2C2 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2C2CLKSOURCE_HSI: HSI selected as I2C2 clock
+ * @arg RCC_I2C2CLKSOURCE_SYSCLK: System Clock selected as I2C2 clock
+ */
+#define __HAL_RCC_GET_I2C2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C2SW)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_ADCx_Clock_Config RCC Extended ADCx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the ADC1 clock (ADC1CLK).
+ * @param __ADC1CLKSource__: specifies the ADC1 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_ADC1PCLK2_DIV2: PCLK2 clock divided by 2 selected as ADC1 clock
+ * @arg RCC_ADC1PCLK2_DIV4: PCLK2 clock divided by 4 selected as ADC1 clock
+ * @arg RCC_ADC1PCLK2_DIV6: PCLK2 clock divided by 6 selected as ADC1 clock
+ * @arg RCC_ADC1PCLK2_DIV8: PCLK2 clock divided by 8 selected as ADC1 clock
+ */
+#define __HAL_RCC_ADC1_CONFIG(__ADC1CLKSource__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_ADCPRE, (uint32_t)(__ADC1CLKSource__))
+
+/** @brief Macro to get the ADC1 clock (ADC1CLK).
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_ADC1PCLK2_DIV2: PCLK2 clock divided by 2 selected as ADC1 clock
+ * @arg RCC_ADC1PCLK2_DIV4: PCLK2 clock divided by 4 selected as ADC1 clock
+ * @arg RCC_ADC1PCLK2_DIV6: PCLK2 clock divided by 6 selected as ADC1 clock
+ * @arg RCC_ADC1PCLK2_DIV8: PCLK2 clock divided by 8 selected as ADC1 clock
+ */
+#define __HAL_RCC_GET_ADC1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_ADCPRE)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_SDADCx_Clock_Config RCC Extended SDADCx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the SDADCx clock (SDADCxCLK).
+ * @param __SDADCPrescaler__: specifies the SDADCx system clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg RCC_SDADCSYSCLK_DIV1: SYSCLK clock selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV2: SYSCLK clock divided by 2 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV4: SYSCLK clock divided by 4 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV6: SYSCLK clock divided by 6 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV8: SYSCLK clock divided by 8 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV10: SYSCLK clock divided by 10 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV12: SYSCLK clock divided by 12 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV14: SYSCLK clock divided by 14 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV16: SYSCLK clock divided by 16 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV20: SYSCLK clock divided by 20 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV24: SYSCLK clock divided by 24 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV28: SYSCLK clock divided by 28 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV32: SYSCLK clock divided by 32 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV36: SYSCLK clock divided by 36 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV40: SYSCLK clock divided by 40 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV44: SYSCLK clock divided by 44 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV48: SYSCLK clock divided by 48 selected as SDADCx clock
+ */
+#define __HAL_RCC_SDADC_CONFIG(__SDADCPrescaler__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_SDADCPRE, (uint32_t)(__SDADCPrescaler__))
+
+/** @brief Macro to get the SDADCx clock prescaler.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_SDADCSYSCLK_DIV1: SYSCLK clock selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV2: SYSCLK clock divided by 2 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV4: SYSCLK clock divided by 4 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV6: SYSCLK clock divided by 6 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV8: SYSCLK clock divided by 8 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV10: SYSCLK clock divided by 10 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV12: SYSCLK clock divided by 12 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV14: SYSCLK clock divided by 14 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV16: SYSCLK clock divided by 16 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV20: SYSCLK clock divided by 20 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV24: SYSCLK clock divided by 24 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV28: SYSCLK clock divided by 28 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV32: SYSCLK clock divided by 32 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV36: SYSCLK clock divided by 36 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV40: SYSCLK clock divided by 40 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV44: SYSCLK clock divided by 44 selected as SDADCx clock
+ * @arg RCC_SDADCSYSCLK_DIV48: SYSCLK clock divided by 48 selected as SDADCx clock
+ */
+#define __HAL_RCC_GET_SDADC_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SDADCPRE)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_CECx_Clock_Config RCC Extended CECx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the CEC clock.
+ * @param __CECCLKSource__: specifies the CEC clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_CECCLKSOURCE_HSI: HSI selected as CEC clock
+ * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
+ */
+#define __HAL_RCC_CEC_CONFIG(__CECCLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_CECSW, (uint32_t)(__CECCLKSource__))
+
+/** @brief Macro to get the HDMI CEC clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_CECCLKSOURCE_HSI: HSI selected as CEC clock
+ * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock
+ */
+#define __HAL_RCC_GET_CEC_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_CECSW)))
+/**
+ * @}
+ */
+
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || \
+ defined(STM32F302x8) || \
+ defined(STM32F373xC)
+
+/** @defgroup RCCEx_USBx_Clock_Config RCC Extended USBx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the USB clock (USBCLK).
+ * @param __USBCLKSource__: specifies the USB clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_USBPLLCLK_DIV1: PLL Clock divided by 1 selected as USB clock
+ * @arg RCC_USBPLLCLK_DIV1_5: PLL Clock divided by 1.5 selected as USB clock
+ */
+#define __HAL_RCC_USB_CONFIG(__USBCLKSource__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_USBPRE, (uint32_t)(__USBCLKSource__))
+
+/** @brief Macro to get the USB clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_USBPLLCLK_DIV1: PLL Clock divided by 1 selected as USB clock
+ * @arg RCC_USBPLLCLK_DIV1_5: PLL Clock divided by 1.5 selected as USB clock
+ */
+#define __HAL_RCC_GET_USB_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_USBPRE)))
+/**
+ * @}
+ */
+
+#endif /* STM32F302xE || STM32F303xE || */
+ /* STM32F302xC || STM32F303xC || */
+ /* STM32F302x8 || */
+ /* STM32F373xC */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+
+/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config
+ * @{
+ */
+/** @brief macro to configure the MCO clock.
+ * @param __MCOCLKSource__: specifies the MCO clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCOSOURCE_HSI: HSI selected as MCO clock
+ * @arg RCC_MCOSOURCE_HSE: HSE selected as MCO clock
+ * @arg RCC_MCOSOURCE_LSI: LSI selected as MCO clock
+ * @arg RCC_MCOSOURCE_LSE: LSE selected as MCO clock
+ * @arg RCC_MCOSOURCE_PLLCLK_DIV2: PLLCLK Divided by 2 selected as MCO clock
+ * @arg RCC_MCOSOURCE_SYSCLK: System Clock selected as MCO clock
+ * @param __MCODiv__: specifies the MCO clock prescaler.
+ * This parameter can be one of the following values:
+ * @arg RCC_MCO_NODIV: No division applied on MCO clock source
+ */
+#define __HAL_RCC_MCO_CONFIG(__MCOCLKSource__, __MCODiv__) \
+ MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO | RCC_CFGR_MCOPRE), ((__MCOCLKSource__) | (__MCODiv__)))
+/**
+ * @}
+ */
+#else
+/** @defgroup RCCEx_MCOx_Clock_Config RCC Extended MCOx Clock Config
+ * @{
+ */
+
+#define __HAL_RCC_MCO_CONFIG(__MCOCLKSource__, __MCODiv__) \
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_MCO, (__MCOCLKSource__))
+/**
+ * @}
+ */
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+
+/** @defgroup RCCEx_I2Cx_Clock_Config RCC Extended I2Cx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the I2C3 clock (I2C3CLK).
+ * @param __I2C3CLKSource__: specifies the I2C3 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_I2C3CLKSOURCE_HSI: HSI selected as I2C3 clock
+ * @arg RCC_I2C3CLKSOURCE_SYSCLK: System Clock selected as I2C3 clock
+ */
+#define __HAL_RCC_I2C3_CONFIG(__I2C3CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_I2C3SW, (uint32_t)(__I2C3CLKSource__))
+
+/** @brief Macro to get the I2C3 clock source.
+ * @retval The clock source can be one of the following values:
+ * @arg RCC_I2C3CLKSOURCE_HSI: HSI selected as I2C3 clock
+ * @arg RCC_I2C3CLKSOURCE_SYSCLK: System Clock selected as I2C3 clock
+ */
+#define __HAL_RCC_GET_I2C3_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C3SW)))
+/**
+ * @}
+ */
+
+/** @defgroup RCCEx_TIMx_Clock_Config RCC Extended TIMx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the TIM2 clock (TIM2CLK).
+ * @param __TIM2CLKSource__: specifies the TIM2 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM2CLK_HCLK: HCLK selected as TIM2 clock
+ * @arg RCC_TIM2CLK_PLL: PLL Clock selected as TIM2 clock
+ */
+#define __HAL_RCC_TIM2_CONFIG(__TIM2CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM2SW, (uint32_t)(__TIM2CLKSource__))
+
+/** @brief Macro to get the TIM2 clock (TIM2CLK).
+ * @retval The clock source can be one of the following values:
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM2CLK_HCLK: HCLK selected as TIM2 clock
+ * @arg RCC_TIM2CLK_PLL: PLL Clock selected as TIM2 clock
+ */
+#define __HAL_RCC_GET_TIM2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM2SW)))
+
+/** @brief Macro to configure the TIM3 & TIM4 clock (TIM34CLK).
+ * @param __TIM3CLKSource__: specifies the TIM3 & TIM4 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM34CLK_HCLK: HCLK selected as TIM3 & TIM4 clock
+ * @arg RCC_TIM34CLK_PLL: PLL Clock selected as TIM3 & TIM4 clock
+ */
+#define __HAL_RCC_TIM34_CONFIG(__TIM34CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM34SW, (uint32_t)(__TIM34CLKSource__))
+
+/** @brief Macro to get the TIM3 & TIM4 clock (TIM34CLK).
+ * @retval The clock source can be one of the following values:
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM34CLK_HCLK: HCLK selected as TIM3 & TIM4 clock
+ * @arg RCC_TIM34CLK_PLL: PLL Clock selected as TIM3 & TIM4 clock
+ */
+#define __HAL_RCC_GET_TIM34_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM34SW)))
+
+/** @brief Macro to configure the TIM15 clock (TIM15CLK).
+ * @param __TIM15CLKSource__: specifies the TIM15 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM15CLK_HCLK: HCLK selected as TIM15 clock
+ * @arg RCC_TIM15CLK_PLL: PLL Clock selected as TIM15 clock
+ */
+#define __HAL_RCC_TIM15_CONFIG(__TIM15CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM15SW, (uint32_t)(__TIM15CLKSource__))
+
+/** @brief Macro to get the TIM15 clock (TIM15CLK).
+ * @retval The clock source can be one of the following values:
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM15CLK_HCLK: HCLK selected as TIM15 clock
+ * @arg RCC_TIM15CLK_PLL: PLL Clock selected as TIM15 clock
+ */
+#define __HAL_RCC_GET_TIM15_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM15SW)))
+
+/** @brief Macro to configure the TIM16 clock (TIM16CLK).
+ * @param __TIM16CLKSource__: specifies the TIM16 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM16CLK_HCLK: HCLK selected as TIM16 clock
+ * @arg RCC_TIM16CLK_PLL: PLL Clock selected as TIM16 clock
+ */
+#define __HAL_RCC_TIM16_CONFIG(__TIM16CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM16SW, (uint32_t)(__TIM16CLKSource__))
+
+/** @brief Macro to get the TIM16 clock (TIM16CLK).
+ * @retval The clock source can be one of the following values:
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM16CLK_HCLK: HCLK selected as TIM16 clock
+ * @arg RCC_TIM16CLK_PLL: PLL Clock selected as TIM16 clock
+ */
+#define __HAL_RCC_GET_TIM16_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM16SW)))
+
+/** @brief Macro to configure the TIM17 clock (TIM17CLK).
+ * @param __TIM17CLKSource__: specifies the TIM17 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM17CLK_HCLK: HCLK selected as TIM17 clock
+ * @arg RCC_TIM17CLK_PLL: PLL Clock selected as TIM17 clock
+ */
+#define __HAL_RCC_TIM17_CONFIG(__TIM17CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM17SW, (uint32_t)(__TIM17CLKSource__))
+
+/** @brief Macro to get the TIM17 clock (TIM17CLK).
+ * @retval The clock source can be one of the following values:
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM17CLK_HCLK: HCLK selected as TIM17 clock
+ * @arg RCC_TIM17CLK_PLL: PLL Clock selected as TIM17 clock
+ */
+#define __HAL_RCC_GET_TIM17_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM17SW)))
+
+/**
+ * @}
+ */
+
+#endif /* STM32f302xE || STM32f303xE || STM32F398xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+/** @addtogroup RCCEx_TIMx_Clock_Config RCC Extended TIMx Clock Config
+ * @{
+ */
+/** @brief Macro to configure the TIM20 clock (TIM20CLK).
+ * @param __TIM20CLKSource__: specifies the TIM20 clock source.
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM20CLK_HCLK: HCLK selected as TIM20 clock
+ * @arg RCC_TIM20CLK_PLL: PLL Clock selected as TIM20 clock
+ */
+#define __HAL_RCC_TIM20_CONFIG(__TIM20CLKSource__) \
+ MODIFY_REG(RCC->CFGR3, RCC_CFGR3_TIM20SW, (uint32_t)(__TIM20CLKSource__))
+
+/** @brief Macro to get the TIM20 clock (TIM20CLK).
+ * @retval The clock source can be one of the following values:
+ * This parameter can be one of the following values:
+ * @arg RCC_TIM20CLK_HCLK: HCLK selected as TIM20 clock
+ * @arg RCC_TIM20CLK_PLL: PLL Clock selected as TIM20 clock
+ */
+#define __HAL_RCC_GET_TIM20_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_TIM20SW)))
+
+/**
+ * @}
+ */
+#endif /* STM32f303xE || STM32F398xx */
+
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RCCEx_Exported_Functions RCC Extended Exported Functions
+ * @{
+ */
+
+/** @addtogroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_RCC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_rtc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,813 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_rtc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of RTC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_RTC_H
+#define __STM32F3xx_HAL_RTC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RTC RTC HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup RTC_Exported_Types RTC Exported Types
+ * @{
+ */
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_RTC_STATE_RESET = 0x00, /*!< RTC not yet initialized or disabled */
+ HAL_RTC_STATE_READY = 0x01, /*!< RTC initialized and ready for use */
+ HAL_RTC_STATE_BUSY = 0x02, /*!< RTC process is ongoing */
+ HAL_RTC_STATE_TIMEOUT = 0x03, /*!< RTC timeout state */
+ HAL_RTC_STATE_ERROR = 0x04 /*!< RTC error state */
+
+}HAL_RTCStateTypeDef;
+
+/**
+ * @brief RTC Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t HourFormat; /*!< Specifies the RTC Hour Format.
+ This parameter can be a value of @ref RTC_Hour_Formats */
+
+ uint32_t AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */
+
+ uint32_t SynchPrediv; /*!< Specifies the RTC Synchronous Predivider value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF */
+
+ uint32_t OutPut; /*!< Specifies which signal will be routed to the RTC output.
+ This parameter can be a value of @ref RTCEx_Output_selection_Definitions */
+
+ uint32_t OutPutPolarity; /*!< Specifies the polarity of the output signal.
+ This parameter can be a value of @ref RTC_Output_Polarity_Definitions */
+
+ uint32_t OutPutType; /*!< Specifies the RTC Output Pin mode.
+ This parameter can be a value of @ref RTC_Output_Type_ALARM_OUT */
+}RTC_InitTypeDef;
+
+/**
+ * @brief RTC Time structure definition
+ */
+typedef struct
+{
+ uint8_t Hours; /*!< Specifies the RTC Time Hour.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the RTC_HourFormat_12 is selected.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the RTC_HourFormat_24 is selected */
+
+ uint8_t Minutes; /*!< Specifies the RTC Time Minutes.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+ uint8_t Seconds; /*!< Specifies the RTC Time Seconds.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+ uint32_t SubSeconds; /*!< Specifies the RTC Time SubSeconds.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 59 */
+
+ uint8_t TimeFormat; /*!< Specifies the RTC AM/PM Time.
+ This parameter can be a value of @ref RTC_AM_PM_Definitions */
+
+ uint32_t DayLightSaving; /*!< Specifies RTC_DayLightSaveOperation: the value of hour adjustment.
+ This parameter can be a value of @ref RTC_DayLightSaving_Definitions */
+
+ uint32_t StoreOperation; /*!< Specifies RTC_StoreOperation value to be written in the BCK bit
+ in CR register to store the operation.
+ This parameter can be a value of @ref RTC_StoreOperation_Definitions */
+}RTC_TimeTypeDef;
+
+/**
+ * @brief RTC Date structure definition
+ */
+typedef struct
+{
+ uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay.
+ This parameter can be a value of @ref RTC_WeekDay_Definitions */
+
+ uint8_t Month; /*!< Specifies the RTC Date Month (in BCD format).
+ This parameter can be a value of @ref RTC_Month_Date_Definitions */
+
+ uint8_t Date; /*!< Specifies the RTC Date.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 31 */
+
+ uint8_t Year; /*!< Specifies the RTC Date Year.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 99 */
+
+}RTC_DateTypeDef;
+
+/**
+ * @brief RTC Alarm structure definition
+ */
+typedef struct
+{
+ RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members */
+
+ uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks.
+ This parameter can be a value of @ref RTC_AlarmMask_Definitions */
+
+ uint32_t AlarmSubSecondMask; /*!< Specifies the RTC Alarm SubSeconds Masks.
+ This parameter can be a value of @ref RTC_Alarm_Sub_Seconds_Masks_Definitions */
+
+ uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on Date or WeekDay.
+ This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */
+
+ uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Date/WeekDay.
+ If the Alarm Date is selected, this parameter must be set to a value in the 1-31 range.
+ If the Alarm WeekDay is selected, this parameter can be a value of @ref RTC_WeekDay_Definitions */
+
+ uint32_t Alarm; /*!< Specifies the alarm .
+ This parameter can be a value of @ref RTC_Alarms_Definitions */
+}RTC_AlarmTypeDef;
+
+/**
+ * @brief Time Handle Structure definition
+ */
+typedef struct
+{
+ RTC_TypeDef *Instance; /*!< Register base address */
+
+ RTC_InitTypeDef Init; /*!< RTC required parameters */
+
+ HAL_LockTypeDef Lock; /*!< RTC locking object */
+
+ __IO HAL_RTCStateTypeDef State; /*!< Time communication state */
+
+}RTC_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RTC_Exported_Constants RTC Exported Constants
+ * @{
+ */
+
+/** @defgroup RTC_Mask_Definition RTC Mask Definition
+ * @{
+ */
+/* Masks Definition */
+#define RTC_TR_RESERVED_MASK ((uint32_t)0x007F7F7F)
+#define RTC_DR_RESERVED_MASK ((uint32_t)0x00FFFF3F)
+#define RTC_INIT_MASK ((uint32_t)0xFFFFFFFF)
+#define RTC_RSF_MASK ((uint32_t)0xFFFFFF5F)
+#define RTC_FLAGS_MASK ((uint32_t)(RTC_FLAG_TSOVF | RTC_FLAG_TSF | RTC_FLAG_WUTF | \
+ RTC_FLAG_ALRBF | RTC_FLAG_ALRAF | RTC_FLAG_INITF | \
+ RTC_FLAG_RSF | RTC_FLAG_INITS | RTC_FLAG_WUTWF | \
+ RTC_FLAG_ALRBWF | RTC_FLAG_ALRAWF | RTC_FLAG_TAMP1F | \
+ RTC_FLAG_RECALPF | RTC_FLAG_SHPF))
+
+#define RTC_TIMEOUT_VALUE 1000
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Hour_Formats RTC Hour Formats
+ * @{
+ */
+#define RTC_HOURFORMAT_24 ((uint32_t)0x00000000)
+#define RTC_HOURFORMAT_12 ((uint32_t)0x00000040)
+
+#define IS_RTC_HOUR_FORMAT(FORMAT) (((FORMAT) == RTC_HOURFORMAT_12) || \
+ ((FORMAT) == RTC_HOURFORMAT_24))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Output_Polarity_Definitions RTC Output Polarity Definitions
+ * @{
+ */
+#define RTC_OUTPUT_POLARITY_HIGH ((uint32_t)0x00000000)
+#define RTC_OUTPUT_POLARITY_LOW ((uint32_t)0x00100000)
+
+#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OUTPUT_POLARITY_HIGH) || \
+ ((POL) == RTC_OUTPUT_POLARITY_LOW))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Output_Type_ALARM_OUT RTC Output Type ALARM OUT
+ * @{
+ */
+#define RTC_OUTPUT_TYPE_OPENDRAIN ((uint32_t)0x00000000)
+#define RTC_OUTPUT_TYPE_PUSHPULL ((uint32_t)0x00040000)
+
+#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OUTPUT_TYPE_OPENDRAIN) || \
+ ((TYPE) == RTC_OUTPUT_TYPE_PUSHPULL))
+
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Asynchronous_Predivider RTC Asynchronous Predivider
+ * @{
+ */
+#define IS_RTC_ASYNCH_PREDIV(PREDIV) ((PREDIV) <= (uint32_t)0x7F)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Synchronous_Predivider RTC Synchronous Predivider
+ * @{
+ */
+#define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= (uint32_t)0x7FFF)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Time_Definitions RTC Time Definitions
+ * @{
+ */
+#define IS_RTC_HOUR12(HOUR) (((HOUR) > (uint32_t)0) && ((HOUR) <= (uint32_t)12))
+#define IS_RTC_HOUR24(HOUR) ((HOUR) <= (uint32_t)23)
+#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= (uint32_t)59)
+#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= (uint32_t)59)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_AM_PM_Definitions RTC AM PM Definitions
+ * @{
+ */
+#define RTC_HOURFORMAT12_AM ((uint8_t)0x00)
+#define RTC_HOURFORMAT12_PM ((uint8_t)0x40)
+
+#define IS_RTC_HOURFORMAT12(PM) (((PM) == RTC_HOURFORMAT12_AM) || ((PM) == RTC_HOURFORMAT12_PM))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_DayLightSaving_Definitions RTC DayLightSaving Definitions
+ * @{
+ */
+#define RTC_DAYLIGHTSAVING_SUB1H ((uint32_t)0x00020000)
+#define RTC_DAYLIGHTSAVING_ADD1H ((uint32_t)0x00010000)
+#define RTC_DAYLIGHTSAVING_NONE ((uint32_t)0x00000000)
+
+#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DAYLIGHTSAVING_SUB1H) || \
+ ((SAVE) == RTC_DAYLIGHTSAVING_ADD1H) || \
+ ((SAVE) == RTC_DAYLIGHTSAVING_NONE))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_StoreOperation_Definitions RTC StoreOperation Definitions
+ * @{
+ */
+#define RTC_STOREOPERATION_RESET ((uint32_t)0x00000000)
+#define RTC_STOREOPERATION_SET ((uint32_t)0x00040000)
+
+#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_STOREOPERATION_RESET) || \
+ ((OPERATION) == RTC_STOREOPERATION_SET))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Input_parameter_format_definitions RTC Input parameter format definitions
+ * @{
+ */
+#define FORMAT_BIN ((uint32_t)0x000000000)
+#define FORMAT_BCD ((uint32_t)0x000000001)
+
+#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == FORMAT_BIN) || ((FORMAT) == FORMAT_BCD))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Year_Date_Definitions RTC Year Date Definitions
+ * @{
+ */
+#define IS_RTC_YEAR(YEAR) ((YEAR) <= (uint32_t)99)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Month_Date_Definitions RTC Month Date Definitions
+ * @{
+ */
+
+/* Coded in BCD format */
+#define RTC_MONTH_JANUARY ((uint8_t)0x01)
+#define RTC_MONTH_FEBRUARY ((uint8_t)0x02)
+#define RTC_MONTH_MARCH ((uint8_t)0x03)
+#define RTC_MONTH_APRIL ((uint8_t)0x04)
+#define RTC_MONTH_MAY ((uint8_t)0x05)
+#define RTC_MONTH_JUNE ((uint8_t)0x06)
+#define RTC_MONTH_JULY ((uint8_t)0x07)
+#define RTC_MONTH_AUGUST ((uint8_t)0x08)
+#define RTC_MONTH_SEPTEMBER ((uint8_t)0x09)
+#define RTC_MONTH_OCTOBER ((uint8_t)0x10)
+#define RTC_MONTH_NOVEMBER ((uint8_t)0x11)
+#define RTC_MONTH_DECEMBER ((uint8_t)0x12)
+
+#define IS_RTC_MONTH(MONTH) (((MONTH) >= (uint32_t)1) && ((MONTH) <= (uint32_t)12))
+#define IS_RTC_DATE(DATE) (((DATE) >= (uint32_t)1) && ((DATE) <= (uint32_t)31))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_WeekDay_Definitions RTC WeekDay Definitions
+ * @{
+ */
+#define RTC_WEEKDAY_MONDAY ((uint8_t)0x01)
+#define RTC_WEEKDAY_TUESDAY ((uint8_t)0x02)
+#define RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03)
+#define RTC_WEEKDAY_THURSDAY ((uint8_t)0x04)
+#define RTC_WEEKDAY_FRIDAY ((uint8_t)0x05)
+#define RTC_WEEKDAY_SATURDAY ((uint8_t)0x06)
+#define RTC_WEEKDAY_SUNDAY ((uint8_t)0x07)
+
+#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Alarm_Definitions RTC Alarm Definitions
+ * @{
+ */
+#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) >(uint32_t) 0) && ((DATE) <= (uint32_t)31))
+#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \
+ ((WEEKDAY) == RTC_WEEKDAY_SUNDAY))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_AlarmDateWeekDay_Definitions RTC AlarmDateWeekDay Definitions
+ * @{
+ */
+#define RTC_ALARMDATEWEEKDAYSEL_DATE ((uint32_t)0x00000000)
+#define RTC_ALARMDATEWEEKDAYSEL_WEEKDAY ((uint32_t)0x40000000)
+
+#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_ALARMDATEWEEKDAYSEL_DATE) || \
+ ((SEL) == RTC_ALARMDATEWEEKDAYSEL_WEEKDAY))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_AlarmMask_Definitions RTC AlarmMask Definitions
+ * @{
+ */
+#define RTC_ALARMMASK_NONE ((uint32_t)0x00000000)
+#define RTC_ALARMMASK_DATEWEEKDAY RTC_ALRMAR_MSK4
+#define RTC_ALARMMASK_HOURS RTC_ALRMAR_MSK3
+#define RTC_ALARMMASK_MINUTES RTC_ALRMAR_MSK2
+#define RTC_ALARMMASK_SECONDS RTC_ALRMAR_MSK1
+#define RTC_ALARMMASK_ALL ((uint32_t)0x80808080)
+
+#define IS_ALARM_MASK(MASK) (((MASK) & 0x7F7F7F7F) == (uint32_t)RESET)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Alarms_Definitions RTC Alarms Definitions
+ * @{
+ */
+#define RTC_ALARM_A RTC_CR_ALRAE
+#define RTC_ALARM_B RTC_CR_ALRBE
+
+#define IS_ALARM(ALARM) (((ALARM) == RTC_ALARM_A) || ((ALARM) == RTC_ALARM_B))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Alarm_Sub_Seconds_Value RTC Alarm Sub Seconds Value
+ * @{
+ */
+#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= (uint32_t)0x00007FFF)
+/**
+ * @}
+ */
+
+ /** @defgroup RTC_Alarm_Sub_Seconds_Masks_Definitions RTC Alarm Sub Seconds Masks Definitions
+ * @{
+ */
+#define RTC_ALARMSUBSECONDMASK_ALL ((uint32_t)0x00000000) /*!< All Alarm SS fields are masked.
+ There is no comparison on sub seconds
+ for Alarm */
+#define RTC_ALARMSUBSECONDMASK_SS14_1 ((uint32_t)0x01000000) /*!< SS[14:1] are don't care in Alarm
+ comparison. Only SS[0] is compared. */
+#define RTC_ALARMSUBSECONDMASK_SS14_2 ((uint32_t)0x02000000) /*!< SS[14:2] are don't care in Alarm
+ comparison. Only SS[1:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_3 ((uint32_t)0x03000000) /*!< SS[14:3] are don't care in Alarm
+ comparison. Only SS[2:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_4 ((uint32_t)0x04000000) /*!< SS[14:4] are don't care in Alarm
+ comparison. Only SS[3:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_5 ((uint32_t)0x05000000) /*!< SS[14:5] are don't care in Alarm
+ comparison. Only SS[4:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_6 ((uint32_t)0x06000000) /*!< SS[14:6] are don't care in Alarm
+ comparison. Only SS[5:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_7 ((uint32_t)0x07000000) /*!< SS[14:7] are don't care in Alarm
+ comparison. Only SS[6:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_8 ((uint32_t)0x08000000) /*!< SS[14:8] are don't care in Alarm
+ comparison. Only SS[7:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_9 ((uint32_t)0x09000000) /*!< SS[14:9] are don't care in Alarm
+ comparison. Only SS[8:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_10 ((uint32_t)0x0A000000) /*!< SS[14:10] are don't care in Alarm
+ comparison. Only SS[9:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_11 ((uint32_t)0x0B000000) /*!< SS[14:11] are don't care in Alarm
+ comparison. Only SS[10:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_12 ((uint32_t)0x0C000000) /*!< SS[14:12] are don't care in Alarm
+ comparison.Only SS[11:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14_13 ((uint32_t)0x0D000000) /*!< SS[14:13] are don't care in Alarm
+ comparison. Only SS[12:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_SS14 ((uint32_t)0x0E000000) /*!< SS[14] is don't care in Alarm
+ comparison.Only SS[13:0] are compared */
+#define RTC_ALARMSUBSECONDMASK_None ((uint32_t)0x0F000000) /*!< SS[14:0] are compared and must match
+ to activate alarm. */
+
+#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK) (((MASK) == RTC_ALARMSUBSECONDMASK_ALL) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_1) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_2) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_3) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_4) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_5) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_6) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_7) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_8) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_9) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_10) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_11) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_12) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_13) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_SS14) || \
+ ((MASK) == RTC_ALARMSUBSECONDMASK_None))
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Interrupts_Definitions RTC Interrupts Definitions
+ * @{
+ */
+#define RTC_IT_TS ((uint32_t)0x00008000)
+#define RTC_IT_WUT ((uint32_t)0x00004000)
+#define RTC_IT_ALRB ((uint32_t)0x00002000)
+#define RTC_IT_ALRA ((uint32_t)0x00001000)
+#define RTC_IT_TAMP ((uint32_t)0x00000004) /* Used only to Enable the Tamper Interrupt */
+#define RTC_IT_TAMP1 ((uint32_t)0x00020000)
+#define RTC_IT_TAMP2 ((uint32_t)0x00040000)
+#define RTC_IT_TAMP3 ((uint32_t)0x00080000)
+/**
+ * @}
+ */
+
+/** @defgroup RTC_Flags_Definitions RTC Flags Definitions
+ * @{
+ */
+#define RTC_FLAG_RECALPF ((uint32_t)0x00010000)
+#define RTC_FLAG_TAMP3F ((uint32_t)0x00008000)
+#define RTC_FLAG_TAMP2F ((uint32_t)0x00004000)
+#define RTC_FLAG_TAMP1F ((uint32_t)0x00002000)
+#define RTC_FLAG_TSOVF ((uint32_t)0x00001000)
+#define RTC_FLAG_TSF ((uint32_t)0x00000800)
+#define RTC_FLAG_WUTF ((uint32_t)0x00000400)
+#define RTC_FLAG_ALRBF ((uint32_t)0x00000200)
+#define RTC_FLAG_ALRAF ((uint32_t)0x00000100)
+#define RTC_FLAG_INITF ((uint32_t)0x00000040)
+#define RTC_FLAG_RSF ((uint32_t)0x00000020)
+#define RTC_FLAG_INITS ((uint32_t)0x00000010)
+#define RTC_FLAG_SHPF ((uint32_t)0x00000008)
+#define RTC_FLAG_WUTWF ((uint32_t)0x00000004)
+#define RTC_FLAG_ALRBWF ((uint32_t)0x00000002)
+#define RTC_FLAG_ALRAWF ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup RTC_Exported_Macros RTC Exported Macros
+ * @{
+ */
+
+/** @brief Reset RTC handle state
+ * @param __HANDLE__: RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET)
+
+/**
+ * @brief Disable the write protection for RTC registers.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Instance->WPR = 0xCA; \
+ (__HANDLE__)->Instance->WPR = 0x53; \
+ } while(0)
+
+/**
+ * @brief Enable the write protection for RTC registers.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__) \
+ do{ \
+ (__HANDLE__)->Instance->WPR = 0xFF; \
+ } while(0)
+
+/**
+ * @brief Enable the RTC ALARMA peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRAE))
+
+/**
+ * @brief Disable the RTC ALARMA peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRAE))
+
+/**
+ * @brief Enable the RTC ALARMB peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRBE))
+
+/**
+ * @brief Disable the RTC ALARMB peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_ALARMB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRBE))
+
+/**
+ * @brief Enable the RTC Alarm interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @arg RTC_IT_ALRB: Alarm B interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC Alarm interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
+ * This parameter can be any combination of the following values:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @arg RTC_IT_ALRB: Alarm B interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified RTC Alarm interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_ALRA: Alarm A interrupt
+ * @arg RTC_IT_ALRB: Alarm B interrupt
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __FLAG__) ((((((__HANDLE__)->Instance->ISR)& ((__FLAG__)>> 4)) & 0x0000FFFF) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC Alarm's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_ALRAF
+ * @arg RTC_FLAG_ALRBF
+ * @arg RTC_FLAG_ALRAWF
+ * @arg RTC_FLAG_ALRBWF
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Alarm's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_ALRAF
+ * @arg RTC_FLAG_ALRBF
+ * @retval None
+ */
+#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+
+#define RTC_EXTI_LINE_ALARM_EVENT ((uint32_t)0x00020000) /*!< External interrupt line 17 Connected to the RTC Alarm event */
+#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)0x00080000) /*!< External interrupt line 19 Connected to the RTC Tamper and Time Stamp events */
+#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)0x00100000) /*!< External interrupt line 20 Connected to the RTC Wakeup event */
+
+/**
+ * @brief Enable the RTC Exti line.
+ * @param __EXTILINE__: specifies the RTC Exti sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_EXTI_LINE_ALARM_EVENT
+ * @arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
+ * @arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
+ * @retval None
+ */
+#define __HAL_RTC_EXTI_ENABLE_IT(__EXTILINE__) (EXTI->IMR |= (__EXTILINE__))
+
+/* alias define maintained for legacy */
+#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT
+
+/**
+ * @brief Disable the RTC Exti line.
+ * @param __EXTILINE__: specifies the RTC Exti sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_EXTI_LINE_ALARM_EVENT
+ * @arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
+ * @arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
+ * @retval None
+ */
+#define __HAL_RTC_EXTI_DISABLE_IT(__EXTILINE__) (EXTI->IMR &= ~(__EXTILINE__))
+
+/* alias define maintained for legacy */
+#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT
+
+/**
+ * @brief Generates a Software interrupt on selected EXTI line.
+ * @param __EXTILINE__: specifies the RTC Exti sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_EXTI_LINE_ALARM_EVENT
+ * @arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
+ * @arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
+ * @retval None
+ */
+#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTILINE__) (EXTI->SWIER |= (__EXTILINE__))
+
+/**
+ * @brief Clear the RTC Exti flags.
+ * @param __FLAG__: specifies the RTC Exti sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_EXTI_LINE_ALARM_EVENT
+ * @arg RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT
+ * @arg RTC_EXTI_LINE_WAKEUPTIMER_EVENT
+ * @retval None
+ */
+#define __HAL_RTC_EXTI_CLEAR_FLAG(__FLAG__) (EXTI->PR = (__FLAG__))
+
+/* alias define maintained for legacy */
+#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG
+
+/**
+ * @}
+ */
+
+/* Include RTC HAL Extended module */
+#include "stm32f3xx_hal_rtc_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RTC_Exported_Functions RTC Exported Functions
+ * @{
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc);
+void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group2 RTC Time and Date functions
+ * @{
+ */
+
+/* RTC Time and Date functions ************************************************/
+HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format);
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group3 RTC Alarm functions
+ * @{
+ */
+/* RTC Alarm functions ********************************************************/
+HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format);
+HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm);
+HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format);
+void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group4 Peripheral Control functions
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc);
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Exported_Functions_Group5 Peripheral State functions
+ * @{
+ */
+/* Peripheral State functions *************************************************/
+HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup RTC_Private_Functions
+ * @{
+ */
+HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef* hrtc);
+uint8_t RTC_ByteToBcd2(uint8_t Value);
+uint8_t RTC_Bcd2ToByte(uint8_t Value);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_RTC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_rtc_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,707 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_rtc_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of RTC HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_RTC_EX_H
+#define __STM32F3xx_HAL_RTC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup RTCEx RTC Extended HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup RTCEx_Exported_Types RTC Extended Exported Types
+ * @{
+ */
+
+/**
+ * @brief RTC Tamper structure definition
+ */
+typedef struct
+{
+ uint32_t Tamper; /*!< Specifies the Tamper Pin.
+ This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */
+
+ uint32_t Trigger; /*!< Specifies the Tamper Trigger.
+ This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */
+
+ uint32_t Filter; /*!< Specifies the RTC Filter Tamper.
+ This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */
+
+ uint32_t SamplingFrequency; /*!< Specifies the sampling frequency.
+ This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */
+
+ uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration .
+ This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */
+
+ uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp .
+ This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */
+
+ uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection.
+ This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */
+}RTC_TamperTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Constants RTC Extended Exported Constants
+ * @{
+ */
+
+/** @defgroup RTCEx_Output_selection_Definitions RTC Extended Output Selection Definition
+ * @{
+ */
+#define RTC_OUTPUT_DISABLE ((uint32_t)0x00000000)
+#define RTC_OUTPUT_ALARMA ((uint32_t)0x00200000)
+#define RTC_OUTPUT_ALARMB ((uint32_t)0x00400000)
+#define RTC_OUTPUT_WAKEUP ((uint32_t)0x00600000)
+
+#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \
+ ((OUTPUT) == RTC_OUTPUT_ALARMA) || \
+ ((OUTPUT) == RTC_OUTPUT_ALARMB) || \
+ ((OUTPUT) == RTC_OUTPUT_WAKEUP))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Backup_Registers_Definitions RTC Extended Backup Registers Definition
+ * @{
+ */
+#define RTC_BKP_DR0 ((uint32_t)0x00000000)
+#define RTC_BKP_DR1 ((uint32_t)0x00000001)
+#define RTC_BKP_DR2 ((uint32_t)0x00000002)
+#define RTC_BKP_DR3 ((uint32_t)0x00000003)
+#define RTC_BKP_DR4 ((uint32_t)0x00000004)
+#define RTC_BKP_DR5 ((uint32_t)0x00000005)
+#define RTC_BKP_DR6 ((uint32_t)0x00000006)
+#define RTC_BKP_DR7 ((uint32_t)0x00000007)
+#define RTC_BKP_DR8 ((uint32_t)0x00000008)
+#define RTC_BKP_DR9 ((uint32_t)0x00000009)
+#define RTC_BKP_DR10 ((uint32_t)0x0000000A)
+#define RTC_BKP_DR11 ((uint32_t)0x0000000B)
+#define RTC_BKP_DR12 ((uint32_t)0x0000000C)
+#define RTC_BKP_DR13 ((uint32_t)0x0000000D)
+#define RTC_BKP_DR14 ((uint32_t)0x0000000E)
+#define RTC_BKP_DR15 ((uint32_t)0x0000000F)
+#if defined(STM32F373xC) || defined(STM32F378xx)
+#define RTC_BKP_DR16 ((uint32_t)0x00000010)
+#define RTC_BKP_DR17 ((uint32_t)0x00000011)
+#define RTC_BKP_DR18 ((uint32_t)0x00000012)
+#define RTC_BKP_DR19 ((uint32_t)0x00000013)
+#define RTC_BKP_DR20 ((uint32_t)0x00000014)
+#define RTC_BKP_DR21 ((uint32_t)0x00000015)
+#define RTC_BKP_DR22 ((uint32_t)0x00000016)
+#define RTC_BKP_DR23 ((uint32_t)0x00000017)
+#define RTC_BKP_DR24 ((uint32_t)0x00000018)
+#define RTC_BKP_DR25 ((uint32_t)0x00000019)
+#define RTC_BKP_DR26 ((uint32_t)0x0000001A)
+#define RTC_BKP_DR27 ((uint32_t)0x0000001B)
+#define RTC_BKP_DR28 ((uint32_t)0x0000001C)
+#define RTC_BKP_DR29 ((uint32_t)0x0000001D)
+#define RTC_BKP_DR30 ((uint32_t)0x0000001E)
+#define RTC_BKP_DR31 ((uint32_t)0x0000001F)
+#endif /* STM32F373xC || STM32F378xx */
+
+#define IS_RTC_BKP(BKP) ((BKP) < (uint32_t) RTC_BKP_NUMBER)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTC Extended Time Stamp Edges definition
+ * @{
+ */
+#define RTC_TIMESTAMPEDGE_RISING ((uint32_t)0x00000000)
+#define RTC_TIMESTAMPEDGE_FALLING ((uint32_t)0x00000008)
+
+#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \
+ ((EDGE) == RTC_TIMESTAMPEDGE_FALLING))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pins_Definitions RTC Extended Tamper Pins Definition
+ * @{
+ */
+#define RTC_TAMPER_1 RTC_TAFCR_TAMP1E
+#define RTC_TAMPER_2 RTC_TAFCR_TAMP2E
+#define RTC_TAMPER_3 RTC_TAFCR_TAMP3E
+
+#define IS_TAMPER(TAMPER) (((TAMPER) == RTC_TAMPER_1) || \
+ ((TAMPER) == RTC_TAMPER_2) || \
+ ((TAMPER) == RTC_TAMPER_3))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_TimeStamp_Pin_Selections RTC Extended TimeStamp Pin Selection
+ * @{
+ */
+#define RTC_TIMESTAMPPIN_PC13 ((uint32_t)0x00000000)
+
+#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_PC13))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Trigger_Definitions RTC Extended Tamper Trigger Definition
+ * @{
+ */
+#define RTC_TAMPERTRIGGER_RISINGEDGE ((uint32_t)0x00000000)
+#define RTC_TAMPERTRIGGER_FALLINGEDGE ((uint32_t)0x00000002)
+#define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE
+#define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE
+
+#define IS_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
+ ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL))
+
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Filter_Definitions RTC Extended Tamper Filter Definition
+ * @{
+ */
+#define RTC_TAMPERFILTER_DISABLE ((uint32_t)0x00000000) /*!< Tamper filter is disabled */
+
+#define RTC_TAMPERFILTER_2SAMPLE ((uint32_t)0x00000800) /*!< Tamper is activated after 2
+ consecutive samples at the active level */
+#define RTC_TAMPERFILTER_4SAMPLE ((uint32_t)0x00001000) /*!< Tamper is activated after 4
+ consecutive samples at the active level */
+#define RTC_TAMPERFILTER_8SAMPLE ((uint32_t)0x00001800) /*!< Tamper is activated after 8
+ consecutive samples at the active level. */
+
+#define IS_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \
+ ((FILTER) == RTC_TAMPERFILTER_8SAMPLE))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTC Extended Tamper Sampling Frequencies Definition
+ * @{
+ */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 ((uint32_t)0x00000000) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 32768 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 ((uint32_t)0x00000100) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 16384 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 ((uint32_t)0x00000200) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 8192 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 ((uint32_t)0x00000300) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 4096 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 ((uint32_t)0x00000400) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 2048 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 ((uint32_t)0x00000500) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 1024 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 ((uint32_t)0x00000600) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 512 */
+#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 ((uint32_t)0x00000700) /*!< Each of the tamper inputs are sampled
+ with a frequency = RTCCLK / 256 */
+
+#define IS_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \
+ ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTC Extended Tamper Pin Precharge Duration Definition
+ * @{
+ */
+#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK ((uint32_t)0x00000000) /*!< Tamper pins are pre-charged before
+ sampling during 1 RTCCLK cycle */
+#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK ((uint32_t)0x00002000) /*!< Tamper pins are pre-charged before
+ sampling during 2 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK ((uint32_t)0x00004000) /*!< Tamper pins are pre-charged before
+ sampling during 4 RTCCLK cycles */
+#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK ((uint32_t)0x00006000) /*!< Tamper pins are pre-charged before
+ sampling during 8 RTCCLK cycles */
+
+#define IS_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \
+ ((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTC Extended Tamper TimeStampOnTamperDetection Definition
+ * @{
+ */
+#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE ((uint32_t)RTC_TAFCR_TAMPTS) /*!< TimeStamp on Tamper Detection event saved */
+#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event is not saved */
+
+#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \
+ ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTC Extended Tamper Pull UP Definition
+ * @{
+ */
+#define RTC_TAMPER_PULLUP_ENABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event saved */
+#define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAFCR_TAMPPUDIS) /*!< TimeStamp on Tamper Detection event is not saved */
+
+#define IS_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \
+ ((STATE) == RTC_TAMPER_PULLUP_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Wakeup_Timer_Definitions RTC Extended Wakeup Timer Definition
+ * @{
+ */
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 ((uint32_t)0x00000000)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 ((uint32_t)0x00000001)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 ((uint32_t)0x00000002)
+#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 ((uint32_t)0x00000003)
+#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS ((uint32_t)0x00000004)
+#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS ((uint32_t)0x00000006)
+
+#define IS_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \
+ ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))
+
+#define IS_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFF)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Smooth_calib_period_Definitions RTC Extended Smooth calib period Definition
+ * @{
+ */
+#define RTC_SMOOTHCALIB_PERIOD_32SEC ((uint32_t)0x00000000) /*!< If RTCCLK = 32768 Hz, Smooth calibation
+ period is 32s, else 2exp20 RTCCLK seconds */
+#define RTC_SMOOTHCALIB_PERIOD_16SEC ((uint32_t)0x00002000) /*!< If RTCCLK = 32768 Hz, Smooth calibation
+ period is 16s, else 2exp19 RTCCLK seconds */
+#define RTC_SMOOTHCALIB_PERIOD_8SEC ((uint32_t)0x00004000) /*!< If RTCCLK = 32768 Hz, Smooth calibation
+ period is 8s, else 2exp18 RTCCLK seconds */
+
+#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \
+ ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \
+ ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTC Extended Smooth calib Plus pulses Definition
+ * @{
+ */
+#define RTC_SMOOTHCALIB_PLUSPULSES_SET ((uint32_t)0x00008000) /*!< The number of RTCCLK pulses added
+ during a X -second window = Y - CALM[8:0]
+ with Y = 512, 256, 128 when X = 32, 16, 8 */
+#define RTC_SMOOTHCALIB_PLUSPULSES_RESET ((uint32_t)0x00000000) /*!< The number of RTCCLK pulses subbstited
+ during a 32-second window = CALM[8:0] */
+
+#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \
+ ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Smooth_calib_Minus_pulses_Definitions RTC Extended Smooth calib Minus pulses Definition
+ * @{
+ */
+#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FF)
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Add_1_Second_Parameter_Definition RTC Extended Add 1 Second Parameter Definition
+ * @{
+ */
+#define RTC_SHIFTADD1S_RESET ((uint32_t)0x00000000)
+#define RTC_SHIFTADD1S_SET ((uint32_t)0x80000000)
+
+#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \
+ ((SEL) == RTC_SHIFTADD1S_SET))
+/**
+ * @}
+ */
+
+/** @defgroup RTCEx_Substract_Fraction_Of_Second_Value RTC Extended Substract Fraction Of Second Value
+ * @{
+ */
+#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFF)
+/**
+ * @}
+ */
+
+ /** @defgroup RTCEx_Calib_Output_selection_Definitions RTC Extended Calib Output selection Definition
+ * @{
+ */
+#define RTC_CALIBOUTPUT_512HZ ((uint32_t)0x00000000)
+#define RTC_CALIBOUTPUT_1HZ ((uint32_t)0x00080000)
+
+#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \
+ ((OUTPUT) == RTC_CALIBOUTPUT_1HZ))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RTCEx_Exported_Macros RTC Extended Exported Macros
+ * @{
+ */
+
+/**
+ * @brief Enable the RTC WakeUp Timer peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
+
+/**
+ * @brief Enable the RTC TimeStamp peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
+
+/**
+ * @brief Disable the RTC WakeUp Timer peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
+
+/**
+ * @brief Disable the RTC TimeStamp peripheral.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
+
+/**
+ * @brief Enable the RTC calibration output.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))
+
+/**
+ * @brief Disable the calibration output.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
+
+/**
+ * @brief Enable the clock reference detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))
+
+/**
+ * @brief Disable the clock reference detection.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @retval None
+ */
+#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
+
+/**
+ * @brief Enable the RTC TimeStamp interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Enable the RTC WakeUpTimer interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC TimeStamp interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Disable the RTC WakeUpTimer interrupt.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified RTC Tamper interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TAMP1
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
+
+/**
+ * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_WUT: WakeUpTimer A interrupt
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
+
+/**
+ * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_IT_TS: TimeStamp interrupt
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__)>> 4)) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC TimeStamp's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC TimeStamp Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TSF
+ * @arg RTC_FLAG_TSOVF
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC WakeUpTimer's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC WakeUpTimer Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_WUTF
+ * @arg RTC_FLAG_WUTWF
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC Tamper's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Get the selected RTC shift operation's flag status.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC shift operation Flag is pending or not.
+ * This parameter can be:
+ * @arg RTC_FLAG_SHPF
+ * @retval None
+ */
+#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
+
+/**
+ * @brief Clear the RTC Time Stamp's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TSF
+ * @retval None
+ */
+#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+ * @brief Clear the RTC Tamper's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_TAMP1F
+ * @retval None
+ */
+#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+
+/**
+ * @brief Clear the RTC Wake Up timer's pending flags.
+ * @param __HANDLE__: specifies the RTC handle.
+ * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled.
+ * This parameter can be:
+ * @arg RTC_FLAG_WUTF
+ * @retval None
+ */
+#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~(((__FLAG__) | RTC_ISR_INIT)& 0x0000FFFF)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RTCEx_Exported_Functions RTC Extended Exported Functions
+ * @{
+ */
+
+/** @addtogroup RTCEx_Exported_Functions_Group1 RTC TimeStamp and Tamper functions
+ * @{
+ */
+
+/* RTC TimeStamp and Tamper functions *****************************************/
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format);
+
+HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
+HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
+void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);
+
+void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/** @addtogroup RTCEx_Exported_Functions_Group2 Extended Wake-up functions
+ * @{
+ */
+
+/* RTC Wake-up functions ******************************************************/
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
+uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
+uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
+void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/** @addtogroup RTCEx_Exported_Functions_Group3 Extended Peripheral Control functions
+ * @{
+ */
+
+/* Extended Control functions ************************************************/
+void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
+uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
+
+HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue);
+HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
+HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);
+/**
+ * @}
+ */
+
+/* Extended RTC features functions *******************************************/
+/** @addtogroup RTCEx_Exported_Functions_Group4 Extended features functions
+ * @{
+ */
+void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc);
+HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_RTC_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_sdadc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,596 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_sdadc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief This file contains all the functions prototypes for the SDADC
+ * firmware library.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_SDADC_H
+#define __STM32F3xx_SDADC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SDADC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SDADC_Exported_Types SDADC Exported Types
+ * @{
+ */
+
+
+/**
+ * @brief HAL SDADC States definition
+ */
+typedef enum
+{
+ HAL_SDADC_STATE_RESET = 0x00, /*!< SDADC not initialized */
+ HAL_SDADC_STATE_READY = 0x01, /*!< SDADC initialized and ready for use */
+ HAL_SDADC_STATE_CALIB = 0x02, /*!< SDADC calibration in progress */
+ HAL_SDADC_STATE_REG = 0x03, /*!< SDADC regular conversion in progress */
+ HAL_SDADC_STATE_INJ = 0x04, /*!< SDADC injected conversion in progress */
+ HAL_SDADC_STATE_REG_INJ = 0x05, /*!< SDADC regular and injected conversions in progress */
+ HAL_SDADC_STATE_ERROR = 0xFF, /*!< SDADC state error */
+}HAL_SDADC_StateTypeDef;
+
+/**
+ * @brief SDADC Init Structure definition
+ */
+typedef struct
+{
+ uint32_t IdleLowPowerMode; /*!< Specifies if SDADC can enter in power down or standby when idle.
+ This parameter can be a value of @ref SDADC_Idle_Low_Power_Mode */
+ uint32_t FastConversionMode; /*!< Specifies if Fast conversion mode is enabled or not.
+ This parameter can be a value of @ref SDADC_Fast_Conv_Mode */
+ uint32_t SlowClockMode; /*!< Specifies if slow clock mode is enabled or not.
+ This parameter can be a value of @ref SDADC_Slow_Clock_Mode */
+ uint32_t ReferenceVoltage; /*!< Specifies the reference voltage.
+ This parameter can be a value of @ref SDADC_Reference_Voltage */
+}SDADC_InitTypeDef;
+
+/**
+ * @brief SDADC handle Structure definition
+ */
+typedef struct
+{
+ SDADC_TypeDef *Instance; /*!< SDADC registers base address */
+ SDADC_InitTypeDef Init; /*!< SDADC init parameters */
+ DMA_HandleTypeDef *hdma; /*!< SDADC DMA Handle parameters */
+ uint32_t RegularContMode; /*!< Regular conversion continuous mode */
+ uint32_t InjectedContMode; /*!< Injected conversion continuous mode */
+ uint32_t InjectedChannelsNbr; /*!< Number of channels in injected sequence */
+ uint32_t InjConvRemaining; /*!< Injected conversion remaining */
+ uint32_t RegularTrigger; /*!< Current trigger used for regular conversion */
+ uint32_t InjectedTrigger; /*!< Current trigger used for injected conversion */
+ uint32_t ExtTriggerEdge; /*!< Rising, falling or both edges selected */
+ uint32_t RegularMultimode; /*!< current type of regular multimode */
+ uint32_t InjectedMultimode; /*!< Current type of injected multimode */
+ HAL_SDADC_StateTypeDef State; /*!< SDADC state */
+ uint32_t ErrorCode; /*!< SDADC Error code */
+}SDADC_HandleTypeDef;
+
+/**
+ * @brief SDADC Configuration Register Parameter Structure
+ */
+typedef struct
+{
+ uint32_t InputMode; /*!< Specifies the input mode (single ended, differential...)
+ This parameter can be any value of @ref SDADC_InputMode */
+ uint32_t Gain; /*!< Specifies the gain setting.
+ This parameter can be any value of @ref SDADC_Gain */
+ uint32_t CommonMode; /*!< Specifies the common mode setting (VSSA, VDDA, VDDA/2).
+ This parameter can be any value of @ref SDADC_CommonMode */
+ uint32_t Offset; /*!< Specifies the 12-bit offset value.
+ This parameter can be any value lower or equal to 0x00000FFF */
+}SDADC_ConfParamTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup SDADC_Exported_Constants SDADC Exported Constants
+ * @{
+ */
+
+/** @defgroup SDADC_Idle_Low_Power_Mode SDADC Idle Low Power Mode
+ * @{
+ */
+#define SDADC_LOWPOWER_NONE ((uint32_t)0x00000000)
+#define SDADC_LOWPOWER_POWERDOWN SDADC_CR1_PDI
+#define SDADC_LOWPOWER_STANDBY SDADC_CR1_SBI
+#define IS_SDADC_LOWPOWER_MODE(LOWPOWER) (((LOWPOWER) == SDADC_LOWPOWER_NONE) || \
+ ((LOWPOWER) == SDADC_LOWPOWER_POWERDOWN) || \
+ ((LOWPOWER) == SDADC_LOWPOWER_STANDBY))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_Fast_Conv_Mode SDADC Fast Conversion Mode
+ * @{
+ */
+#define SDADC_FAST_CONV_DISABLE ((uint32_t)0x00000000)
+#define SDADC_FAST_CONV_ENABLE SDADC_CR2_FAST
+#define IS_SDADC_FAST_CONV_MODE(FAST) (((FAST) == SDADC_FAST_CONV_DISABLE) || \
+ ((FAST) == SDADC_FAST_CONV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_Slow_Clock_Mode SDADC Slow Clock Mode
+ * @{
+ */
+#define SDADC_SLOW_CLOCK_DISABLE ((uint32_t)0x00000000)
+#define SDADC_SLOW_CLOCK_ENABLE SDADC_CR1_SLOWCK
+#define IS_SDADC_SLOW_CLOCK_MODE(MODE) (((MODE) == SDADC_SLOW_CLOCK_DISABLE) || \
+ ((MODE) == SDADC_SLOW_CLOCK_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_Reference_Voltage SDADC Reference Voltage
+ * @{
+ */
+#define SDADC_VREF_EXT ((uint32_t)0x00000000) /*!< The reference voltage is forced externally using VREF pin */
+#define SDADC_VREF_VREFINT1 SDADC_CR1_REFV_0 /*!< The reference voltage is forced internally to 1.22V VREFINT */
+#define SDADC_VREF_VREFINT2 SDADC_CR1_REFV_1 /*!< The reference voltage is forced internally to 1.8V VREFINT */
+#define SDADC_VREF_VDDA SDADC_CR1_REFV /*!< The reference voltage is forced internally to VDDA */
+#define IS_SDADC_VREF(VREF) (((VREF) == SDADC_VREF_EXT) || \
+ ((VREF) == SDADC_VREF_VREFINT1) || \
+ ((VREF) == SDADC_VREF_VREFINT2) || \
+ ((VREF) == SDADC_VREF_VDDA))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_ConfIndex SDADC Configuration Index
+ * @{
+ */
+
+#define SDADC_CONF_INDEX_0 ((uint32_t)0x00000000) /*!< Configuration 0 Register selected */
+#define SDADC_CONF_INDEX_1 ((uint32_t)0x00000001) /*!< Configuration 1 Register selected */
+#define SDADC_CONF_INDEX_2 ((uint32_t)0x00000002) /*!< Configuration 2 Register selected */
+
+#define IS_SDADC_CONF_INDEX(CONF) (((CONF) == SDADC_CONF_INDEX_0) || \
+ ((CONF) == SDADC_CONF_INDEX_1) || \
+ ((CONF) == SDADC_CONF_INDEX_2))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_InputMode SDADC Input Mode
+ * @{
+ */
+#define SDADC_INPUT_MODE_DIFF ((uint32_t)0x00000000) /*!< Conversions are executed in differential mode */
+#define SDADC_INPUT_MODE_SE_OFFSET SDADC_CONF0R_SE0_0 /*!< Conversions are executed in single ended offset mode */
+#define SDADC_INPUT_MODE_SE_ZERO_REFERENCE SDADC_CONF0R_SE0 /*!< Conversions are executed in single ended zero-volt reference mode */
+
+#define IS_SDADC_INPUT_MODE(MODE) (((MODE) == SDADC_INPUT_MODE_DIFF) || \
+ ((MODE) == SDADC_INPUT_MODE_SE_OFFSET) || \
+ ((MODE) == SDADC_INPUT_MODE_SE_ZERO_REFERENCE))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_Gain SDADC Gain
+ * @{
+ */
+#define SDADC_GAIN_1 ((uint32_t)0x00000000) /*!< Gain equal to 1 */
+#define SDADC_GAIN_2 SDADC_CONF0R_GAIN0_0 /*!< Gain equal to 2 */
+#define SDADC_GAIN_4 SDADC_CONF0R_GAIN0_1 /*!< Gain equal to 4 */
+#define SDADC_GAIN_8 ((uint32_t)0x00300000) /*!< Gain equal to 8 */
+#define SDADC_GAIN_16 SDADC_CONF0R_GAIN0_2 /*!< Gain equal to 16 */
+#define SDADC_GAIN_32 ((uint32_t)0x00500000) /*!< Gain equal to 32 */
+#define SDADC_GAIN_1_2 SDADC_CONF0R_GAIN0 /*!< Gain equal to 1/2 */
+#define IS_SDADC_GAIN(GAIN) (((GAIN) == SDADC_GAIN_1) || \
+ ((GAIN) == SDADC_GAIN_2) || \
+ ((GAIN) == SDADC_GAIN_4) || \
+ ((GAIN) == SDADC_GAIN_8) || \
+ ((GAIN) == SDADC_GAIN_16) || \
+ ((GAIN) == SDADC_GAIN_32) || \
+ ((GAIN) == SDADC_GAIN_1_2))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_CommonMode SDADC Common Mode
+ * @{
+ */
+#define SDADC_COMMON_MODE_VSSA ((uint32_t)0x00000000) /*!< Select SDADC VSSA as common mode */
+#define SDADC_COMMON_MODE_VDDA_2 SDADC_CONF0R_COMMON0_0 /*!< Select SDADC VDDA/2 as common mode */
+#define SDADC_COMMON_MODE_VDDA SDADC_CONF0R_COMMON0_1 /*!< Select SDADC VDDA as common mode */
+#define IS_SDADC_COMMON_MODE(MODE) (((MODE) == SDADC_COMMON_MODE_VSSA) || \
+ ((MODE) == SDADC_COMMON_MODE_VDDA_2) || \
+ ((MODE) == SDADC_COMMON_MODE_VDDA))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_Offset SDADC Offset
+ * @{
+ */
+#define IS_SDADC_OFFSET_VALUE(VALUE) ((VALUE) <= 0x00000FFF)
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_Channel_Selection SDADC Channel Selection
+ * @{
+ */
+
+/* SDADC Channels ------------------------------------------------------------*/
+/* The SDADC channels are defined as follows:
+ - in 16-bit LSB the channel mask is set
+ - in 16-bit MSB the channel number is set
+ e.g. for channel 5 definition:
+ - the channel mask is 0x00000020 (bit 5 is set)
+ - the channel number 5 is 0x00050000
+ --> Consequently, channel 5 definition is 0x00000020 | 0x00050000 = 0x00050020 */
+#define SDADC_CHANNEL_0 ((uint32_t)0x00000001)
+#define SDADC_CHANNEL_1 ((uint32_t)0x00010002)
+#define SDADC_CHANNEL_2 ((uint32_t)0x00020004)
+#define SDADC_CHANNEL_3 ((uint32_t)0x00030008)
+#define SDADC_CHANNEL_4 ((uint32_t)0x00040010)
+#define SDADC_CHANNEL_5 ((uint32_t)0x00050020)
+#define SDADC_CHANNEL_6 ((uint32_t)0x00060040)
+#define SDADC_CHANNEL_7 ((uint32_t)0x00070080)
+#define SDADC_CHANNEL_8 ((uint32_t)0x00080100)
+
+/* Just one channel of the 9 channels can be selected for regular conversion */
+#define IS_SDADC_REGULAR_CHANNEL(CHANNEL) (((CHANNEL) == SDADC_CHANNEL_0) || \
+ ((CHANNEL) == SDADC_CHANNEL_1) || \
+ ((CHANNEL) == SDADC_CHANNEL_2) || \
+ ((CHANNEL) == SDADC_CHANNEL_3) || \
+ ((CHANNEL) == SDADC_CHANNEL_4) || \
+ ((CHANNEL) == SDADC_CHANNEL_5) || \
+ ((CHANNEL) == SDADC_CHANNEL_6) || \
+ ((CHANNEL) == SDADC_CHANNEL_7) || \
+ ((CHANNEL) == SDADC_CHANNEL_8))
+
+/* Any or all of the 9 channels can be selected for injected conversion */
+#define IS_SDADC_INJECTED_CHANNEL(CHANNEL) (((CHANNEL) != 0) && ((CHANNEL) <= 0x000F01FF))
+
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_CalibrationSequence SDADC Calibration Sequence
+ * @{
+ */
+#define SDADC_CALIBRATION_SEQ_1 ((uint32_t)0x00000000) /*!< One calibration sequence to calculate offset of conf0 (OFFSET0[11:0]) */
+#define SDADC_CALIBRATION_SEQ_2 SDADC_CR2_CALIBCNT_0 /*!< Two calibration sequences to calculate offset of conf0 and conf1 (OFFSET0[11:0] and OFFSET1[11:0]) */
+#define SDADC_CALIBRATION_SEQ_3 SDADC_CR2_CALIBCNT_1 /*!< Three calibration sequences to calculate offset of conf0, conf1 and conf2 (OFFSET0[11:0], OFFSET1[11:0], and OFFSET2[11:0]) */
+
+#define IS_SDADC_CALIB_SEQUENCE(SEQUENCE) (((SEQUENCE) == SDADC_CALIBRATION_SEQ_1) || \
+ ((SEQUENCE) == SDADC_CALIBRATION_SEQ_2) || \
+ ((SEQUENCE) == SDADC_CALIBRATION_SEQ_3))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_ContinuousMode SDADC Continuous Mode
+ * @{
+ */
+#define SDADC_CONTINUOUS_CONV_OFF ((uint32_t)0x00000000) /*!< Conversion are not continuous */
+#define SDADC_CONTINUOUS_CONV_ON ((uint32_t)0x00000001) /*!< Conversion are continuous */
+
+#define IS_SDADC_CONTINUOUS_MODE(MODE) (((MODE) == SDADC_CONTINUOUS_CONV_OFF) || \
+ ((MODE) == SDADC_CONTINUOUS_CONV_ON))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_Trigger SDADC Trigger
+ * @{
+ */
+#define SDADC_SOFTWARE_TRIGGER ((uint32_t)0x00000000) /*!< Software trigger */
+#define SDADC_SYNCHRONOUS_TRIGGER ((uint32_t)0x00000001) /*!< Synchronous with SDADC1 (only for SDADC2 and SDADC3) */
+#define SDADC_EXTERNAL_TRIGGER ((uint32_t)0x00000002) /*!< External trigger */
+
+#define IS_SDADC_REGULAR_TRIGGER(TRIGGER) (((TRIGGER) == SDADC_SOFTWARE_TRIGGER) || \
+ ((TRIGGER) == SDADC_SYNCHRONOUS_TRIGGER))
+
+#define IS_SDADC_INJECTED_TRIGGER(TRIGGER) (((TRIGGER) == SDADC_SOFTWARE_TRIGGER) || \
+ ((TRIGGER) == SDADC_SYNCHRONOUS_TRIGGER) || \
+ ((TRIGGER) == SDADC_EXTERNAL_TRIGGER))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_InjectedExtTrigger SDADC Injected External Trigger
+ * @{
+ */
+#define SDADC_EXT_TRIG_TIM13_CC1 ((uint32_t)0x00000000) /*!< Trigger source for SDADC1 */
+#define SDADC_EXT_TRIG_TIM14_CC1 ((uint32_t)0x00000100) /*!< Trigger source for SDADC1 */
+#define SDADC_EXT_TRIG_TIM16_CC1 ((uint32_t)0x00000000) /*!< Trigger source for SDADC3 */
+#define SDADC_EXT_TRIG_TIM17_CC1 ((uint32_t)0x00000000) /*!< Trigger source for SDADC2 */
+#define SDADC_EXT_TRIG_TIM12_CC1 ((uint32_t)0x00000100) /*!< Trigger source for SDADC2 */
+#define SDADC_EXT_TRIG_TIM12_CC2 ((uint32_t)0x00000100) /*!< Trigger source for SDADC3 */
+#define SDADC_EXT_TRIG_TIM15_CC2 ((uint32_t)0x00000200) /*!< Trigger source for SDADC1 */
+#define SDADC_EXT_TRIG_TIM2_CC3 ((uint32_t)0x00000200) /*!< Trigger source for SDADC2 */
+#define SDADC_EXT_TRIG_TIM2_CC4 ((uint32_t)0x00000200) /*!< Trigger source for SDADC3 */
+#define SDADC_EXT_TRIG_TIM3_CC1 ((uint32_t)0x00000300) /*!< Trigger source for SDADC1 */
+#define SDADC_EXT_TRIG_TIM3_CC2 ((uint32_t)0x00000300) /*!< Trigger source for SDADC2 */
+#define SDADC_EXT_TRIG_TIM3_CC3 ((uint32_t)0x00000300) /*!< Trigger source for SDADC3 */
+#define SDADC_EXT_TRIG_TIM4_CC1 ((uint32_t)0x00000400) /*!< Trigger source for SDADC1 */
+#define SDADC_EXT_TRIG_TIM4_CC2 ((uint32_t)0x00000400) /*!< Trigger source for SDADC2 */
+#define SDADC_EXT_TRIG_TIM4_CC3 ((uint32_t)0x00000400) /*!< Trigger source for SDADC3 */
+#define SDADC_EXT_TRIG_TIM19_CC2 ((uint32_t)0x00000500) /*!< Trigger source for SDADC1 */
+#define SDADC_EXT_TRIG_TIM19_CC3 ((uint32_t)0x00000500) /*!< Trigger source for SDADC2 */
+#define SDADC_EXT_TRIG_TIM19_CC4 ((uint32_t)0x00000500) /*!< Trigger source for SDADC3 */
+#define SDADC_EXT_TRIG_EXTI11 ((uint32_t)0x00000700) /*!< Trigger source for SDADC1, SDADC2 and SDADC3 */
+#define SDADC_EXT_TRIG_EXTI15 ((uint32_t)0x00000600) /*!< Trigger source for SDADC1, SDADC2 and SDADC3 */
+
+#define IS_SDADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == SDADC_EXT_TRIG_TIM13_CC1) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM14_CC1) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM16_CC1) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM17_CC1) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM12_CC1) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM12_CC2) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM15_CC2) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM2_CC3) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM2_CC4) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM3_CC1) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM3_CC2) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM3_CC3) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM4_CC1) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM4_CC2) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM4_CC3) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM19_CC2) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM19_CC3) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_TIM19_CC4) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_EXTI11) || \
+ ((INJTRIG) == SDADC_EXT_TRIG_EXTI15))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_ExtTriggerEdge SDADC External Trigger Edge
+ * @{
+ */
+#define SDADC_EXT_TRIG_RISING_EDGE SDADC_CR2_JEXTEN_0 /*!< External rising edge */
+#define SDADC_EXT_TRIG_FALLING_EDGE SDADC_CR2_JEXTEN_1 /*!< External falling edge */
+#define SDADC_EXT_TRIG_BOTH_EDGES SDADC_CR2_JEXTEN /*!< External rising and falling edges */
+
+#define IS_SDADC_EXT_TRIG_EDGE(TRIGGER) (((TRIGGER) == SDADC_EXT_TRIG_RISING_EDGE) || \
+ ((TRIGGER) == SDADC_EXT_TRIG_FALLING_EDGE) || \
+ ((TRIGGER) == SDADC_EXT_TRIG_BOTH_EDGES))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_InjectedDelay SDADC Injected Conversion Delay
+ * @{
+ */
+#define SDADC_INJECTED_DELAY_NONE ((uint32_t)0x00000000) /*!< No delay on injected conversion */
+#define SDADC_INJECTED_DELAY SDADC_CR2_JDS /*!< Delay on injected conversion */
+
+#define IS_SDADC_INJECTED_DELAY(DELAY) (((DELAY) == SDADC_INJECTED_DELAY_NONE) || \
+ ((DELAY) == SDADC_INJECTED_DELAY))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_MultimodeType SDADC Multimode Type
+ * @{
+ */
+#define SDADC_MULTIMODE_SDADC1_SDADC2 ((uint32_t)0x00000000) /*!< Get conversion values for SDADC1 and SDADC2 */
+#define SDADC_MULTIMODE_SDADC1_SDADC3 ((uint32_t)0x00000001) /*!< Get conversion values for SDADC1 and SDADC3 */
+
+#define IS_SDADC_MULTIMODE_TYPE(TYPE) (((TYPE) == SDADC_MULTIMODE_SDADC1_SDADC2) || \
+ ((TYPE) == SDADC_MULTIMODE_SDADC1_SDADC3))
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_ErrorCode SDADC Error Code
+ * @{
+ */
+#define SDADC_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define SDADC_ERROR_REGULAR_OVERRUN ((uint32_t)0x00000001) /*!< Overrun occurs during regular conversion */
+#define SDADC_ERROR_INJECTED_OVERRUN ((uint32_t)0x00000002) /*!< Overrun occurs during injected conversion */
+#define SDADC_ERROR_DMA ((uint32_t)0x00000003) /*!< DMA error occurs */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup SDADC_Exported_Macros SDADC Exported Macros
+ * @{
+ */
+
+/** @brief Reset SDADC handle state
+ * @param __HANDLE__: SDADC handle.
+ * @retval None
+ */
+#define __HAL_SDADC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SDADC_STATE_RESET)
+
+/**
+ * @}
+ */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SDADC_Exported_Functions SDADC Exported Functions
+ * @{
+ */
+
+/** @addtogroup SDADC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_SDADC_Init(SDADC_HandleTypeDef *hsdadc);
+HAL_StatusTypeDef HAL_SDADC_DeInit(SDADC_HandleTypeDef *hsdadc);
+void HAL_SDADC_MspInit(SDADC_HandleTypeDef* hsdadc);
+void HAL_SDADC_MspDeInit(SDADC_HandleTypeDef* hsdadc);
+
+/**
+ * @}
+ */
+
+/** @addtogroup SDADC_Exported_Functions_Group2 peripheral control functions
+ * @{
+ */
+
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_SDADC_PrepareChannelConfig(SDADC_HandleTypeDef *hsdadc,
+ uint32_t ConfIndex,
+ SDADC_ConfParamTypeDef* ConfParamStruct);
+HAL_StatusTypeDef HAL_SDADC_AssociateChannelConfig(SDADC_HandleTypeDef *hsdadc,
+ uint32_t Channel,
+ uint32_t ConfIndex);
+HAL_StatusTypeDef HAL_SDADC_ConfigChannel(SDADC_HandleTypeDef *hsdadc,
+ uint32_t Channel,
+ uint32_t ContinuousMode);
+HAL_StatusTypeDef HAL_SDADC_InjectedConfigChannel(SDADC_HandleTypeDef *hsdadc,
+ uint32_t Channel,
+ uint32_t ContinuousMode);
+HAL_StatusTypeDef HAL_SDADC_SelectInjectedExtTrigger(SDADC_HandleTypeDef *hsdadc,
+ uint32_t InjectedExtTrigger,
+ uint32_t ExtTriggerEdge);
+HAL_StatusTypeDef HAL_SDADC_SelectInjectedDelay(SDADC_HandleTypeDef *hsdadc,
+ uint32_t InjectedDelay);
+HAL_StatusTypeDef HAL_SDADC_SelectRegularTrigger(SDADC_HandleTypeDef *hsdadc, uint32_t Trigger);
+HAL_StatusTypeDef HAL_SDADC_SelectInjectedTrigger(SDADC_HandleTypeDef *hsdadc, uint32_t Trigger);
+HAL_StatusTypeDef HAL_SDADC_MultiModeConfigChannel(SDADC_HandleTypeDef* hsdadc, uint32_t MultimodeType);
+HAL_StatusTypeDef HAL_SDADC_InjectedMultiModeConfigChannel(SDADC_HandleTypeDef* hsdadc, uint32_t MultimodeType);
+
+/**
+ * @}
+ */
+
+/** @addtogroup SDADC_Exported_Functions_Group3 Input and Output operation functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_SDADC_CalibrationStart(SDADC_HandleTypeDef *hsdadc, uint32_t CalibrationSequence);
+HAL_StatusTypeDef HAL_SDADC_CalibrationStart_IT(SDADC_HandleTypeDef *hsdadc, uint32_t CalibrationSequence);
+
+HAL_StatusTypeDef HAL_SDADC_Start(SDADC_HandleTypeDef *hsdadc);
+HAL_StatusTypeDef HAL_SDADC_Start_IT(SDADC_HandleTypeDef *hsdadc);
+HAL_StatusTypeDef HAL_SDADC_Start_DMA(SDADC_HandleTypeDef *hsdadc, uint32_t *pData, uint32_t Length);
+HAL_StatusTypeDef HAL_SDADC_Stop(SDADC_HandleTypeDef *hsdadc);
+HAL_StatusTypeDef HAL_SDADC_Stop_IT(SDADC_HandleTypeDef *hsdadc);
+HAL_StatusTypeDef HAL_SDADC_Stop_DMA(SDADC_HandleTypeDef *hsdadc);
+
+HAL_StatusTypeDef HAL_SDADC_InjectedStart(SDADC_HandleTypeDef *hsdadc);
+HAL_StatusTypeDef HAL_SDADC_InjectedStart_IT(SDADC_HandleTypeDef *hsdadc);
+HAL_StatusTypeDef HAL_SDADC_InjectedStart_DMA(SDADC_HandleTypeDef *hsdadc, uint32_t *pData, uint32_t Length);
+HAL_StatusTypeDef HAL_SDADC_InjectedStop(SDADC_HandleTypeDef *hsdadc);
+HAL_StatusTypeDef HAL_SDADC_InjectedStop_IT(SDADC_HandleTypeDef *hsdadc);
+HAL_StatusTypeDef HAL_SDADC_InjectedStop_DMA(SDADC_HandleTypeDef *hsdadc);
+
+HAL_StatusTypeDef HAL_SDADC_MultiModeStart_DMA(SDADC_HandleTypeDef* hsdadc, uint32_t* pData, uint32_t Length);
+HAL_StatusTypeDef HAL_SDADC_MultiModeStop_DMA(SDADC_HandleTypeDef* hsdadc);
+HAL_StatusTypeDef HAL_SDADC_InjectedMultiModeStart_DMA(SDADC_HandleTypeDef* hsdadc, uint32_t* pData, uint32_t Length);
+HAL_StatusTypeDef HAL_SDADC_InjectedMultiModeStop_DMA(SDADC_HandleTypeDef* hsdadc);
+
+uint32_t HAL_SDADC_GetValue(SDADC_HandleTypeDef *hsdadc);
+uint32_t HAL_SDADC_InjectedGetValue(SDADC_HandleTypeDef *hsdadc, uint32_t* Channel);
+uint32_t HAL_SDADC_MultiModeGetValue(SDADC_HandleTypeDef* hsdadc);
+uint32_t HAL_SDADC_InjectedMultiModeGetValue(SDADC_HandleTypeDef* hsdadc);
+
+void HAL_SDADC_IRQHandler(SDADC_HandleTypeDef* hsdadc);
+
+HAL_StatusTypeDef HAL_SDADC_PollForCalibEvent(SDADC_HandleTypeDef* hsdadc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SDADC_PollForConversion(SDADC_HandleTypeDef* hsdadc, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SDADC_PollForInjectedConversion(SDADC_HandleTypeDef* hsdadc, uint32_t Timeout);
+
+void HAL_SDADC_CalibrationCpltCallback(SDADC_HandleTypeDef* hsdadc);
+void HAL_SDADC_ConvHalfCpltCallback(SDADC_HandleTypeDef* hsdadc);
+void HAL_SDADC_ConvCpltCallback(SDADC_HandleTypeDef* hsdadc);
+void HAL_SDADC_InjectedConvHalfCpltCallback(SDADC_HandleTypeDef* hsdadc);
+void HAL_SDADC_InjectedConvCpltCallback(SDADC_HandleTypeDef* hsdadc);
+void HAL_SDADC_ErrorCallback(SDADC_HandleTypeDef* hsdadc);
+
+/**
+ * @}
+ */
+
+/** @defgroup SDADC_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+
+/* Peripheral State and Error functions ***************************************/
+HAL_SDADC_StateTypeDef HAL_SDADC_GetState(SDADC_HandleTypeDef* hsdadc);
+uint32_t HAL_SDADC_GetError(SDADC_HandleTypeDef* hsdadc);
+
+/* Private functions ---------------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(STM32F373xC) || defined(STM32F378xx) */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F3xx_SDADC_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_smartcard.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,817 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_smartcard.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of SMARTCARD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_SMARTCARD_H
+#define __STM32F3xx_HAL_SMARTCARD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SMARTCARD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types
+ * @{
+ */
+
+/**
+ * @brief SMARTCARD Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< Configures the SmartCard communication baud rate.
+ The baud rate register is computed using the following formula:
+ Baud Rate Register = ((PCLKx) / ((hsmartcard->Init.BaudRate))) */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter @ref SMARTCARD_Word_Length can only be set to 9 (8 data + 1 parity bits). */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits @ref SMARTCARD_Stop_Bits.
+ Only 1.5 stop bits are authorized in SmartCard mode. */
+
+ uint16_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref SMARTCARD_Parity
+ @note The parity is enabled by default (PCE is forced to 1).
+ Since the WordLength is forced to 8 bits + parity, M is
+ forced to 1 and the parity bit is the 9th bit. */
+
+ uint16_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref SMARTCARD_Mode */
+
+ uint16_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
+ This parameter can be a value of @ref SMARTCARD_Clock_Polarity */
+
+ uint16_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref SMARTCARD_Clock_Phase */
+
+ uint16_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref SMARTCARD_Last_Bit */
+
+ uint16_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected.
+ Selecting the single sample method increases the receiver tolerance to clock
+ deviations. This parameter can be a value of @ref SMARTCARD_OneBit_Sampling. */
+
+ uint8_t Prescaler; /*!< Specifies the SmartCard Prescaler */
+
+ uint8_t GuardTime; /*!< Specifies the SmartCard Guard Time */
+
+ uint16_t NACKEnable; /*!< Specifies whether the SmartCard NACK transmission is enabled
+ in case of parity error.
+ This parameter can be a value of @ref SMARTCARD_NACK_Enable */
+
+ uint32_t TimeOutEnable; /*!< Specifies whether the receiver timeout is enabled.
+ This parameter can be a value of @ref SMARTCARD_Timeout_Enable*/
+
+ uint32_t TimeOutValue; /*!< Specifies the receiver time out value in number of baud blocks:
+ it is used to implement the Character Wait Time (CWT) and
+ Block Wait Time (BWT). It is coded over 24 bits. */
+
+ uint8_t BlockLength; /*!< Specifies the SmartCard Block Length in T=1 Reception mode.
+ This parameter can be any value from 0x0 to 0xFF */
+
+ uint8_t AutoRetryCount; /*!< Specifies the SmartCard auto-retry count (number of retries in
+ receive and transmit mode). When set to 0, retransmission is
+ disabled. Otherwise, its maximum value is 7 (before signalling
+ an error) */
+
+}SMARTCARD_InitTypeDef;
+
+/**
+ * @brief SMARTCARD advanced features initalization structure definition
+ */
+typedef struct
+{
+ uint32_t AdvFeatureInit; /*!< Specifies which advanced SMARTCARD features is initialized. Several
+ advanced features may be initialized at the same time. This parameter
+ can be a value of @ref SMARTCARD_Advanced_Features_Initialization_Type */
+
+ uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted.
+ This parameter can be a value of @ref SMARTCARD_Tx_Inv */
+
+ uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted.
+ This parameter can be a value of @ref SMARTCARD_Rx_Inv */
+
+ uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic
+ vs negative/inverted logic).
+ This parameter can be a value of @ref SMARTCARD_Data_Inv */
+
+ uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped.
+ This parameter can be a value of @ref SMARTCARD_Rx_Tx_Swap */
+
+ uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled.
+ This parameter can be a value of @ref SMARTCARD_Overrun_Disable */
+
+ uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error.
+ This parameter can be a value of @ref SMARTCARD_DMA_Disable_on_Rx_Error */
+
+ uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line.
+ This parameter can be a value of @ref SMARTCARD_MSB_First */
+}SMARTCARD_AdvFeatureInitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_SMARTCARD_STATE_RESET = 0x00, /*!< Peripheral is not initialized */
+ HAL_SMARTCARD_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_SMARTCARD_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_SMARTCARD_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_SMARTCARD_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_SMARTCARD_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_SMARTCARD_STATE_ERROR = 0x04 /*!< Error */
+}HAL_SMARTCARD_StateTypeDef;
+
+/**
+ * @brief HAL SMARTCARD Error Code structure definition
+ */
+typedef enum
+{
+ HAL_SMARTCARD_ERROR_NONE = 0x00, /*!< No error */
+ HAL_SMARTCARD_ERROR_PE = 0x01, /*!< Parity error */
+ HAL_SMARTCARD_ERROR_NE = 0x02, /*!< Noise error */
+ HAL_SMARTCARD_ERROR_FE = 0x04, /*!< frame error */
+ HAL_SMARTCARD_ERROR_ORE = 0x08, /*!< Overrun error */
+ HAL_SMARTCARD_ERROR_DMA = 0x10, /*!< DMA transfer error */
+ HAL_SMARTCARD_ERROR_RTO = 0x20 /*!< Receiver TimeOut error */
+}HAL_SMARTCARD_ErrorTypeDef;
+
+/**
+ * @brief SMARTCARD handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /* USART registers base address */
+
+ SMARTCARD_InitTypeDef Init; /* SmartCard communication parameters */
+
+ SMARTCARD_AdvFeatureInitTypeDef AdvancedInit; /* SmartCard advanced features initialization parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to SmartCard Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* SmartCard Tx Transfer size */
+
+ uint16_t TxXferCount; /* SmartCard Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to SmartCard Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* SmartCard Rx Transfer size */
+
+ uint16_t RxXferCount; /* SmartCard Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /* SmartCard Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* SmartCard Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ HAL_SMARTCARD_StateTypeDef State; /* SmartCard communication state */
+
+ HAL_SMARTCARD_ErrorTypeDef ErrorCode; /* SmartCard Error code */
+
+}SMARTCARD_HandleTypeDef;
+
+/**
+ * @brief SMARTCARD clock sources
+ */
+typedef enum
+{
+ SMARTCARD_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */
+ SMARTCARD_CLOCKSOURCE_PCLK2 = 0x01, /*!< PCLK2 clock source */
+ SMARTCARD_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */
+ SMARTCARD_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */
+ SMARTCARD_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */
+ SMARTCARD_CLOCKSOURCE_UNDEFINED = 0x10 /*!< undefined clock source */
+}SMARTCARD_ClockSourceTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported Constants
+ * @{
+ */
+
+/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length
+ * @{
+ */
+#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
+#define IS_SMARTCARD_WORD_LENGTH(LENGTH) ((LENGTH) == SMARTCARD_WORDLENGTH_9B)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Stop Bits
+ * @{
+ */
+#define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP))
+#define IS_SMARTCARD_STOPBITS(STOPBITS) ((STOPBITS) == SMARTCARD_STOPBITS_1_5)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Parity SMARTCARD Parity
+ * @{
+ */
+#define SMARTCARD_PARITY_EVEN ((uint16_t)USART_CR1_PCE)
+#define SMARTCARD_PARITY_ODD ((uint16_t)(USART_CR1_PCE | USART_CR1_PS))
+#define IS_SMARTCARD_PARITY(PARITY) (((PARITY) == SMARTCARD_PARITY_EVEN) || \
+ ((PARITY) == SMARTCARD_PARITY_ODD))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Mode SMARTCARD Transfer Mode
+ * @{
+ */
+#define SMARTCARD_MODE_RX ((uint16_t)USART_CR1_RE)
+#define SMARTCARD_MODE_TX ((uint16_t)USART_CR1_TE)
+#define SMARTCARD_MODE_TX_RX ((uint16_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_SMARTCARD_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity
+ * @{
+ */
+#define SMARTCARD_POLARITY_LOW ((uint16_t)0x0000)
+#define SMARTCARD_POLARITY_HIGH ((uint16_t)USART_CR2_CPOL)
+#define IS_SMARTCARD_POLARITY(CPOL) (((CPOL) == SMARTCARD_POLARITY_LOW) || ((CPOL) == SMARTCARD_POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase
+ * @{
+ */
+#define SMARTCARD_PHASE_1EDGE ((uint16_t)0x0000)
+#define SMARTCARD_PHASE_2EDGE ((uint16_t)USART_CR2_CPHA)
+#define IS_SMARTCARD_PHASE(CPHA) (((CPHA) == SMARTCARD_PHASE_1EDGE) || ((CPHA) == SMARTCARD_PHASE_2EDGE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit
+ * @{
+ */
+#define SMARTCARD_LASTBIT_DISABLED ((uint16_t)0x0000)
+#define SMARTCARD_LASTBIT_ENABLED ((uint16_t)USART_CR2_LBCL)
+#define IS_SMARTCARD_LASTBIT(LASTBIT) (((LASTBIT) == SMARTCARD_LASTBIT_DISABLED) || \
+ ((LASTBIT) == SMARTCARD_LASTBIT_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_OneBit_Sampling SMARTCARD One Bit Sampling Method
+ * @{
+ */
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLED ((uint16_t)0x0000)
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLED ((uint16_t)USART_CR3_ONEBIT)
+#define IS_SMARTCARD_ONEBIT_SAMPLING(ONEBIT) (((ONEBIT) == SMARTCARD_ONEBIT_SAMPLING_DISABLED) || \
+ ((ONEBIT) == SMARTCARD_ONEBIT_SAMPLING_ENABLED))
+/**
+ * @}
+ */
+
+
+/** @defgroup SMARTCARD_NACK_Enable SMARTCARD NACK Enable
+ * @{
+ */
+#define SMARTCARD_NACK_ENABLED ((uint16_t)USART_CR3_NACK)
+#define SMARTCARD_NACK_DISABLED ((uint16_t)0x0000)
+#define IS_SMARTCARD_NACK(NACK) (((NACK) == SMARTCARD_NACK_ENABLED) || \
+ ((NACK) == SMARTCARD_NACK_DISABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Timeout_Enable SMARTCARD Timeout Enable
+ * @{
+ */
+#define SMARTCARD_TIMEOUT_DISABLED ((uint32_t)0x00000000)
+#define SMARTCARD_TIMEOUT_ENABLED ((uint32_t)USART_CR2_RTOEN)
+#define IS_SMARTCARD_TIMEOUT(TIMEOUT) (((TIMEOUT) == SMARTCARD_TIMEOUT_DISABLED) || \
+ ((TIMEOUT) == SMARTCARD_TIMEOUT_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Advanced_Features_Initialization_Type SMARTCARD advanced feature initialization type
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_NO_INIT ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_TXINVERT_INIT ((uint32_t)0x00000001)
+#define SMARTCARD_ADVFEATURE_RXINVERT_INIT ((uint32_t)0x00000002)
+#define SMARTCARD_ADVFEATURE_DATAINVERT_INIT ((uint32_t)0x00000004)
+#define SMARTCARD_ADVFEATURE_SWAP_INIT ((uint32_t)0x00000008)
+#define SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT ((uint32_t)0x00000010)
+#define SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT ((uint32_t)0x00000020)
+#define SMARTCARD_ADVFEATURE_MSBFIRST_INIT ((uint32_t)0x00000080)
+#define IS_SMARTCARD_ADVFEATURE_INIT(INIT) ((INIT) <= (SMARTCARD_ADVFEATURE_NO_INIT | \
+ SMARTCARD_ADVFEATURE_TXINVERT_INIT | \
+ SMARTCARD_ADVFEATURE_RXINVERT_INIT | \
+ SMARTCARD_ADVFEATURE_DATAINVERT_INIT | \
+ SMARTCARD_ADVFEATURE_SWAP_INIT | \
+ SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT | \
+ SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT | \
+ SMARTCARD_ADVFEATURE_MSBFIRST_INIT))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Tx_Inv SMARTCARD advanced feature TX pin active level inversion
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_TXINV_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_TXINV_ENABLE ((uint32_t)USART_CR2_TXINV)
+#define IS_SMARTCARD_ADVFEATURE_TXINV(TXINV) (((TXINV) == SMARTCARD_ADVFEATURE_TXINV_DISABLE) || \
+ ((TXINV) == SMARTCARD_ADVFEATURE_TXINV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Rx_Inv SMARTCARD advanced feature RX pin active level inversion
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_RXINV_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_RXINV_ENABLE ((uint32_t)USART_CR2_RXINV)
+#define IS_SMARTCARD_ADVFEATURE_RXINV(RXINV) (((RXINV) == SMARTCARD_ADVFEATURE_RXINV_DISABLE) || \
+ ((RXINV) == SMARTCARD_ADVFEATURE_RXINV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Data_Inv SMARTCARD advanced feature Binary Data inversion
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_DATAINV_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_DATAINV_ENABLE ((uint32_t)USART_CR2_DATAINV)
+#define IS_SMARTCARD_ADVFEATURE_DATAINV(DATAINV) (((DATAINV) == SMARTCARD_ADVFEATURE_DATAINV_DISABLE) || \
+ ((DATAINV) == SMARTCARD_ADVFEATURE_DATAINV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Rx_Tx_Swap SMARTCARD advanced feature RX TX pins swap
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_SWAP_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_SWAP_ENABLE ((uint32_t)USART_CR2_SWAP)
+#define IS_SMARTCARD_ADVFEATURE_SWAP(SWAP) (((SWAP) == SMARTCARD_ADVFEATURE_SWAP_DISABLE) || \
+ ((SWAP) == SMARTCARD_ADVFEATURE_SWAP_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Overrun_Disable SMARTCARD advanced feature Overrun Disable
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_OVERRUN_ENABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_OVERRUN_DISABLE ((uint32_t)USART_CR3_OVRDIS)
+#define IS_SMARTCARD_OVERRUN(OVERRUN) (((OVERRUN) == SMARTCARD_ADVFEATURE_OVERRUN_ENABLE) || \
+ ((OVERRUN) == SMARTCARD_ADVFEATURE_OVERRUN_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_DMA_Disable_on_Rx_Error SMARTCARD advanced feature DMA Disable on Rx Error
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR ((uint32_t)USART_CR3_DDRE)
+#define IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(DMA) (((DMA) == SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR) || \
+ ((DMA) == SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_MSB_First SMARTCARD advanced feature MSB first
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE ((uint32_t)USART_CR2_MSBFIRST)
+#define IS_SMARTCARD_ADVFEATURE_MSBFIRST(MSBFIRST) (((MSBFIRST) == SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE) || \
+ ((MSBFIRST) == SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SmartCard_Flags SMARTCARD Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the ISR register
+ * @{
+ */
+#define SMARTCARD_FLAG_REACK ((uint32_t)0x00400000)
+#define SMARTCARD_FLAG_TEACK ((uint32_t)0x00200000)
+#define SMARTCARD_FLAG_BUSY ((uint32_t)0x00010000)
+#define SMARTCARD_FLAG_EOBF ((uint32_t)0x00001000)
+#define SMARTCARD_FLAG_RTOF ((uint32_t)0x00000800)
+#define SMARTCARD_FLAG_TXE ((uint32_t)0x00000080)
+#define SMARTCARD_FLAG_TC ((uint32_t)0x00000040)
+#define SMARTCARD_FLAG_RXNE ((uint32_t)0x00000020)
+#define SMARTCARD_FLAG_ORE ((uint32_t)0x00000008)
+#define SMARTCARD_FLAG_NE ((uint32_t)0x00000004)
+#define SMARTCARD_FLAG_FE ((uint32_t)0x00000002)
+#define SMARTCARD_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Interrupt_definition SMARTCARD Interrupts Definition
+ * Elements values convention: 0000ZZZZ0XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ * @{
+ */
+
+#define SMARTCARD_IT_PE ((uint16_t)0x0028)
+#define SMARTCARD_IT_TXE ((uint16_t)0x0727)
+#define SMARTCARD_IT_TC ((uint16_t)0x0626)
+#define SMARTCARD_IT_RXNE ((uint16_t)0x0525)
+
+#define SMARTCARD_IT_ERR ((uint16_t)0x0060)
+#define SMARTCARD_IT_ORE ((uint16_t)0x0300)
+#define SMARTCARD_IT_NE ((uint16_t)0x0200)
+#define SMARTCARD_IT_FE ((uint16_t)0x0100)
+
+#define SMARTCARD_IT_EOB ((uint16_t)0x0C3B)
+#define SMARTCARD_IT_RTO ((uint16_t)0x0B3A)
+/**
+ * @}
+ */
+
+
+/** @defgroup SMARTCARD_IT_CLEAR_Flags SMARTCARD Interruption Clear Flags
+ * @{
+ */
+#define SMARTCARD_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
+#define SMARTCARD_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
+#define SMARTCARD_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
+#define SMARTCARD_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
+#define SMARTCARD_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
+#define SMARTCARD_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */
+#define SMARTCARD_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Request_Parameters SMARTCARD Request Parameters
+ * @{
+ */
+#define SMARTCARD_RXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
+#define SMARTCARD_TXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
+#define IS_SMARTCARD_REQUEST_PARAMETER(PARAM) (((PARAM) == SMARTCARD_RXDATA_FLUSH_REQUEST) || \
+ ((PARAM) == SMARTCARD_TXDATA_FLUSH_REQUEST))
+/**
+ * @}
+ */
+
+
+/** @defgroup SMARTCARD_CR3_SCARCNT_LSB_POS SMARTCARD auto retry counter LSB position in CR3 register
+ * @{
+ */
+#define SMARTCARD_CR3_SCARCNT_LSB_POS ((uint32_t) 17)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_GTPR_GT_LSB_POS SMARTCARD guard time value LSB position in GTPR register
+ * @{
+ */
+#define SMARTCARD_GTPR_GT_LSB_POS ((uint32_t) 8)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_RTOR_BLEN_LSB_POS SMARTCARD block length LSB position in RTOR register
+ * @{
+ */
+#define SMARTCARD_RTOR_BLEN_LSB_POS ((uint32_t) 24)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Interruption_Mask SMARTCARD interruptions flag mask
+ * @{
+ */
+#define SMARTCARD_IT_MASK ((uint16_t)0x001F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros
+ * @{
+ */
+
+/** @brief Reset SMARTCARD handle state
+ * @param __HANDLE__: SMARTCARD handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMARTCARD_STATE_RESET)
+
+/** @brief Checks whether the specified Smartcard flag is set or not.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_FLAG_REACK: Receive enable ackowledge flag
+ * @arg SMARTCARD_FLAG_TEACK: Transmit enable ackowledge flag
+ * @arg SMARTCARD_FLAG_BUSY: Busy flag
+ * @arg SMARTCARD_FLAG_EOBF: End of block flag
+ * @arg SMARTCARD_FLAG_RTOF: Receiver timeout flag
+ * @arg SMARTCARD_FLAG_TXE: Transmit data register empty flag
+ * @arg SMARTCARD_FLAG_TC: Transmission Complete flag
+ * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag
+ * @arg SMARTCARD_FLAG_ORE: OverRun Error flag
+ * @arg SMARTCARD_FLAG_NE: Noise Error flag
+ * @arg SMARTCARD_FLAG_FE: Framing Error flag
+ * @arg SMARTCARD_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+
+/** @brief Enables the specified SmartCard interrupt.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __INTERRUPT__: specifies the SMARTCARD interrupt to enable.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+ * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
+
+/** @brief Disables the specified SmartCard interrupt.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __INTERRUPT__: specifies the SMARTCARD interrupt to disable.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+ * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
+
+
+/** @brief Checks whether the specified SmartCard interrupt has occurred or not.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __IT__: specifies the SMARTCARD interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+ * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_ORE: OverRun Error interrupt
+ * @arg SMARTCARD_IT_NE: Noise Error interrupt
+ * @arg SMARTCARD_IT_FE: Framing Error interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08)))
+
+/** @brief Checks whether the specified SmartCard interrupt interrupt source is enabled.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __IT__: specifies the SMARTCARD interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+ * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_ORE: OverRun Error interrupt
+ * @arg SMARTCARD_IT_NE: Noise Error interrupt
+ * @arg SMARTCARD_IT_FE: Framing Error interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1 : \
+ (((((uint8_t)(__IT__)) >> 5U) == 2)? (__HANDLE__)->Instance->CR2 : \
+ (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & SMARTCARD_IT_MASK)))
+
+
+/** @brief Clears the specified SMARTCARD ISR flag, in setting the proper ICR register flag.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+ * to clear the corresponding interrupt
+ * This parameter can be one of the following values:
+ * @arg USART_CLEAR_PEF: Parity Error Clear Flag
+ * @arg USART_CLEAR_FEF: Framing Error Clear Flag
+ * @arg USART_CLEAR_NEF: Noise detected Clear Flag
+ * @arg USART_CLEAR_OREF: OverRun Error Clear Flag
+ * @arg USART_CLEAR_TCF: Transmission Complete Clear Flag
+ * @arg USART_CLEAR_RTOF: Receiver Time Out Clear Flag
+ * @arg USART_CLEAR_EOBF: End Of Block Clear Flag
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
+
+/** @brief Set a specific SMARTCARD request flag.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __REQ__: specifies the request flag to set
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_RXDATA_FLUSH_REQUEST: Receive Data flush Request
+ * @arg SMARTCARD_TXDATA_FLUSH_REQUEST: Transmit data flush Request
+ *
+ * @retval None
+ */
+#define __HAL_SMARTCARD_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
+
+/** @brief Enable the USART associated to the SMARTCARD Handle
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3 to select the USART peripheral
+ * @retval None
+ */
+#define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable the USART associated to the SMARTCARD Handle
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3 to select the USART peripheral
+ * @retval None
+ */
+#define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/** @brief Check the Baud rate range. The maximum Baud Rate is derived from the
+ * maximum clock on F3 (i.e. 72 MHz) divided by the oversampling used
+ * on the SMARTCARD (i.e. 16)
+ * @param __BAUDRATE__: Baud rate set by the configuration function.
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_SMARTCARD_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 4500001)
+
+/** @brief Check the block length range. The maximum SMARTCARD block length is 0xFF.
+ * @param __LENGTH__: block length.
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_SMARTCARD_BLOCKLENGTH(__LENGTH__) ((__LENGTH__) <= 0xFF)
+
+/** @brief Check the receiver timeout value. The maximum SMARTCARD receiver timeout
+ * value is 0xFFFFFF.
+ * @param __TIMEOUTVALUE__: receiver timeout value.
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_SMARTCARD_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFF)
+
+/** @brief Check the SMARTCARD autoretry counter value. The maximum number of
+ * retransmissions is 0x7.
+ * @param __COUNT__: number of retransmissions
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_SMARTCARD_AUTORETRY_COUNT(__COUNT__) ((__COUNT__) <= 0x7)
+
+
+
+/**
+ * @}
+ */
+
+/* Include SMARTCARD HAL Extended module */
+#include "stm32f3xx_hal_smartcard_ex.h"
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SMARTCARD_Exported_Functions SMARTCARD Exported Functions
+ * @{
+ */
+
+/** @addtogroup SMARTCARD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard);
+HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard);
+
+/**
+ * @}
+ */
+
+/** @addtogroup SMARTCARD_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard);
+
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+
+/* Peripheral State and Error functions ***************************************/
+HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsmartcard);
+uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsmartcard);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_SMARTCARD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_smartcard_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,233 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_smartcard_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of SMARTCARD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_SMARTCARD_EX_H
+#define __STM32F3xx_HAL_SMARTCARD_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SMARTCARDEx SMARTCARD Extended HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup SMARTCARDEx_Exported_Macros SMARTCARD Extended Exported Macros
+ * @{
+ */
+
+/** @brief Reports the SMARTCARD clock source.
+ * @param __HANDLE__: specifies the SMARTCARD Handle
+ * @param __CLOCKSOURCE__ : output variable
+ * @retval the SMARTCARD clocking source, written in __CLOCKSOURCE__.
+ */
+#if defined(STM32F334x8) || defined(STM32F303x8) || defined(STM32F328xx)
+#define __HAL_SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ } while(0)
+#else
+#define __HAL_SMARTCARD_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK2: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK2; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = SMARTCARD_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ } while(0)
+#endif
+
+/**
+ * @}
+ */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SMARTCARDEx_Exported_Functions SMARTCARD Extended Exported Functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+/* IO operation functions *****************************************************/
+/* Peripheral Control functions ***********************************************/
+/** @addtogroup SMARTCARDEx_Exported_Functions_Group1 Extended Peripheral Control functions
+ * @{
+ */
+void HAL_SMARTCARDEx_BlockLength_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t BlockLength);
+void HAL_SMARTCARDEx_TimeOut_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t TimeOutValue);
+HAL_StatusTypeDef HAL_SMARTCARDEx_EnableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard);
+HAL_StatusTypeDef HAL_SMARTCARDEx_DisableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard);
+
+/* Peripheral State and Error functions ***************************************/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_SMARTCARD_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_smbus.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,645 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_smbus.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of SMBUS HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_SMBUS_H
+#define __STM32F3xx_HAL_SMBUS_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SMBUS
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SMBUS_Exported_Types SMBUS Exported Types
+ * @{
+ */
+
+/**
+ * @brief SMBUS Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Timing; /*!< Specifies the SMBUS_TIMINGR_register value.
+ This parameter calculated by referring to SMBUS initialization
+ section in Reference manual */
+ uint32_t AnalogFilter; /*!< Specifies if Analog Filter is enable or not.
+ This parameter can be a a value of @ref SMBUS_Analog_Filter */
+
+ uint32_t OwnAddress1; /*!< Specifies the first device own address.
+ This parameter can be a 7-bit or 10-bit address. */
+
+ uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode for master is selected.
+ This parameter can be a value of @ref SMBUS_addressing_mode */
+
+ uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected.
+ This parameter can be a value of @ref SMBUS_dual_addressing_mode */
+
+ uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected
+ This parameter can be a 7-bit address. */
+
+ uint32_t OwnAddress2Masks; /*!< Specifies the acknoledge mask address second device own address if dual addressing mode is selected
+ This parameter can be a value of @ref SMBUS_own_address2_masks. */
+
+ uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected.
+ This parameter can be a value of @ref SMBUS_general_call_addressing_mode. */
+
+ uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected.
+ This parameter can be a value of @ref SMBUS_nostretch_mode */
+
+ uint32_t PacketErrorCheckMode; /*!< Specifies if Packet Error Check mode is selected.
+ This parameter can be a value of @ref SMBUS_packet_error_check_mode */
+
+ uint32_t PeripheralMode; /*!< Specifies which mode of Periphal is selected.
+ This parameter can be a value of @ref SMBUS_peripheral_mode */
+
+ uint32_t SMBusTimeout; /*!< Specifies the content of the 32 Bits SMBUS_TIMEOUT_register value.
+ (Enable bits and different timeout values)
+ This parameter calculated by referring to SMBUS initialization
+ section in Reference manual */
+} SMBUS_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_SMBUS_STATE_RESET = 0x00, /*!< SMBUS not yet initialized or disabled */
+ HAL_SMBUS_STATE_READY = 0x01, /*!< SMBUS initialized and ready for use */
+ HAL_SMBUS_STATE_BUSY = 0x02, /*!< SMBUS internal process is ongoing */
+ HAL_SMBUS_STATE_MASTER_BUSY_TX = 0x12, /*!< Master Data Transmission process is ongoing */
+ HAL_SMBUS_STATE_MASTER_BUSY_RX = 0x22, /*!< Master Data Reception process is ongoing */
+ HAL_SMBUS_STATE_SLAVE_BUSY_TX = 0x32, /*!< Slave Data Transmission process is ongoing */
+ HAL_SMBUS_STATE_SLAVE_BUSY_RX = 0x42, /*!< Slave Data Reception process is ongoing */
+ HAL_SMBUS_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_SMBUS_STATE_ERROR = 0x04, /*!< Reception process is ongoing */
+ HAL_SMBUS_STATE_SLAVE_LISTEN = 0x08, /*!< Address Listen Mode is ongoing */
+ /* Aliases for inter STM32 series compatibility */
+ HAL_SMBUS_STATE_LISTEN = HAL_SMBUS_STATE_SLAVE_LISTEN
+}HAL_SMBUS_StateTypeDef;
+
+/**
+ * @brief HAL SMBUS Error Code structure definition
+ */
+typedef enum
+{
+ HAL_SMBUS_ERROR_NONE = 0x00, /*!< No error */
+ HAL_SMBUS_ERROR_BERR = 0x01, /*!< BERR error */
+ HAL_SMBUS_ERROR_ARLO = 0x02, /*!< ARLO error */
+ HAL_SMBUS_ERROR_ACKF = 0x04, /*!< ACKF error */
+ HAL_SMBUS_ERROR_OVR = 0x08, /*!< OVR error */
+ HAL_SMBUS_ERROR_HALTIMEOUT = 0x10, /*!< Timeout error */
+ HAL_SMBUS_ERROR_BUSTIMEOUT = 0x20, /*!< Bus Timeout error */
+ HAL_SMBUS_ERROR_ALERT = 0x40, /*!< Alert error */
+ HAL_SMBUS_ERROR_PECERR = 0x80 /*!< PEC error */
+
+}HAL_SMBUS_ErrorTypeDef;
+
+/**
+ * @brief SMBUS handle Structure definition
+ */
+typedef struct
+{
+ I2C_TypeDef *Instance; /*!< SMBUS registers base address */
+
+ SMBUS_InitTypeDef Init; /*!< SMBUS communication parameters */
+
+ uint8_t *pBuffPtr; /*!< Pointer to SMBUS transfer buffer */
+
+ uint16_t XferSize; /*!< SMBUS transfer size */
+
+ __IO uint16_t XferCount; /*!< SMBUS transfer counter */
+
+ __IO uint32_t XferOptions; /*!< SMBUS transfer options */
+
+ __IO HAL_SMBUS_StateTypeDef PreviousState; /*!< SMBUS communication Previous tate */
+
+ HAL_LockTypeDef Lock; /*!< SMBUS locking object */
+
+ __IO HAL_SMBUS_StateTypeDef State; /*!< SMBUS communication state */
+
+ __IO HAL_SMBUS_ErrorTypeDef ErrorCode; /*!< SMBUS Error code */
+
+}SMBUS_HandleTypeDef;
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup SMBUS_Exported_Constants SMBUS Exported Constants
+ * @{
+ */
+
+/** @defgroup SMBUS_Analog_Filter SMBUS Analog Filter
+ * @{
+ */
+#define SMBUS_ANALOGFILTER_ENABLED ((uint32_t)0x00000000)
+#define SMBUS_ANALOGFILTER_DISABLED I2C_CR1_ANFOFF
+
+#define IS_SMBUS_ANALOG_FILTER(FILTER) (((FILTER) == SMBUS_ANALOGFILTER_ENABLED) || \
+ ((FILTER) == SMBUS_ANALOGFILTER_DISABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_addressing_mode SMBUS addressing mode
+ * @{
+ */
+#define SMBUS_ADDRESSINGMODE_7BIT ((uint32_t)0x00000001)
+#define SMBUS_ADDRESSINGMODE_10BIT ((uint32_t)0x00000002)
+
+#define IS_SMBUS_ADDRESSING_MODE(MODE) (((MODE) == SMBUS_ADDRESSINGMODE_7BIT) || \
+ ((MODE) == SMBUS_ADDRESSINGMODE_10BIT))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_dual_addressing_mode SMBUS dual addressing mode
+ * @{
+ */
+
+#define SMBUS_DUALADDRESS_DISABLED ((uint32_t)0x00000000)
+#define SMBUS_DUALADDRESS_ENABLED I2C_OAR2_OA2EN
+
+#define IS_SMBUS_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == SMBUS_DUALADDRESS_DISABLED) || \
+ ((ADDRESS) == SMBUS_DUALADDRESS_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_own_address2_masks SMBUS own address2 masks
+ * @{
+ */
+
+#define SMBUS_OA2_NOMASK ((uint8_t)0x00)
+#define SMBUS_OA2_MASK01 ((uint8_t)0x01)
+#define SMBUS_OA2_MASK02 ((uint8_t)0x02)
+#define SMBUS_OA2_MASK03 ((uint8_t)0x03)
+#define SMBUS_OA2_MASK04 ((uint8_t)0x04)
+#define SMBUS_OA2_MASK05 ((uint8_t)0x05)
+#define SMBUS_OA2_MASK06 ((uint8_t)0x06)
+#define SMBUS_OA2_MASK07 ((uint8_t)0x07)
+
+#define IS_SMBUS_OWN_ADDRESS2_MASK(MASK) (((MASK) == SMBUS_OA2_NOMASK) || \
+ ((MASK) == SMBUS_OA2_MASK01) || \
+ ((MASK) == SMBUS_OA2_MASK02) || \
+ ((MASK) == SMBUS_OA2_MASK03) || \
+ ((MASK) == SMBUS_OA2_MASK04) || \
+ ((MASK) == SMBUS_OA2_MASK05) || \
+ ((MASK) == SMBUS_OA2_MASK06) || \
+ ((MASK) == SMBUS_OA2_MASK07))
+/**
+ * @}
+ */
+
+
+/** @defgroup SMBUS_general_call_addressing_mode SMBUS general call addressing mode
+ * @{
+ */
+#define SMBUS_GENERALCALL_DISABLED ((uint32_t)0x00000000)
+#define SMBUS_GENERALCALL_ENABLED I2C_CR1_GCEN
+
+#define IS_SMBUS_GENERAL_CALL(CALL) (((CALL) == SMBUS_GENERALCALL_DISABLED) || \
+ ((CALL) == SMBUS_GENERALCALL_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_nostretch_mode SMBUS nostretch mode
+ * @{
+ */
+#define SMBUS_NOSTRETCH_DISABLED ((uint32_t)0x00000000)
+#define SMBUS_NOSTRETCH_ENABLED I2C_CR1_NOSTRETCH
+
+#define IS_SMBUS_NO_STRETCH(STRETCH) (((STRETCH) == SMBUS_NOSTRETCH_DISABLED) || \
+ ((STRETCH) == SMBUS_NOSTRETCH_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_packet_error_check_mode SMBUS packet error check mode
+ * @{
+ */
+#define SMBUS_PEC_DISABLED ((uint32_t)0x00000000)
+#define SMBUS_PEC_ENABLED I2C_CR1_PECEN
+
+#define IS_SMBUS_PEC(PEC) (((PEC) == SMBUS_PEC_DISABLED) || \
+ ((PEC) == SMBUS_PEC_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_peripheral_mode SMBUS peripheral mode
+ * @{
+ */
+#define SMBUS_PERIPHERAL_MODE_SMBUS_HOST (uint32_t)(I2C_CR1_SMBHEN)
+#define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE (uint32_t)(0x00000000)
+#define SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP (uint32_t)(I2C_CR1_SMBDEN)
+
+#define IS_SMBUS_PERIPHERAL_MODE(MODE) (((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_HOST) || \
+ ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE) || \
+ ((MODE) == SMBUS_PERIPHERAL_MODE_SMBUS_SLAVE_ARP))
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_ReloadEndMode_definition SMBUS ReloadEndMode definition
+ * @{
+ */
+
+#define SMBUS_SOFTEND_MODE ((uint32_t)0x00000000)
+#define SMBUS_RELOAD_MODE I2C_CR2_RELOAD
+#define SMBUS_AUTOEND_MODE I2C_CR2_AUTOEND
+#define SMBUS_SENDPEC_MODE I2C_CR2_PECBYTE
+
+#define IS_SMBUS_TRANSFER_MODE(MODE) (((MODE) == SMBUS_RELOAD_MODE) || \
+ ((MODE) == SMBUS_AUTOEND_MODE) || \
+ ((MODE) == SMBUS_SOFTEND_MODE) || \
+ ((MODE) == (SMBUS_RELOAD_MODE | SMBUS_SENDPEC_MODE)) || \
+ ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE)) || \
+ ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_RELOAD_MODE)) || \
+ ((MODE) == (SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE | SMBUS_RELOAD_MODE )))
+
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_StartStopMode_definition SMBUS StartStopMode definition
+ * @{
+ */
+
+#define SMBUS_NO_STARTSTOP ((uint32_t)0x00000000)
+#define SMBUS_GENERATE_STOP I2C_CR2_STOP
+#define SMBUS_GENERATE_START_READ (uint32_t)(I2C_CR2_START | I2C_CR2_RD_WRN)
+#define SMBUS_GENERATE_START_WRITE I2C_CR2_START
+
+#define IS_SMBUS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == SMBUS_GENERATE_STOP) || \
+ ((REQUEST) == SMBUS_GENERATE_START_READ) || \
+ ((REQUEST) == SMBUS_GENERATE_START_WRITE) || \
+ ((REQUEST) == SMBUS_NO_STARTSTOP))
+
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_XferOptions_definition SMBUS XferOptions definition
+ * @{
+ */
+
+#define SMBUS_FIRST_FRAME ((uint32_t)(SMBUS_SOFTEND_MODE))
+#define SMBUS_NEXT_FRAME ((uint32_t)(SMBUS_RELOAD_MODE | SMBUS_SOFTEND_MODE))
+#define SMBUS_FIRST_AND_LAST_FRAME_NO_PEC SMBUS_AUTOEND_MODE
+#define SMBUS_LAST_FRAME_NO_PEC SMBUS_AUTOEND_MODE
+#define SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE))
+#define SMBUS_LAST_FRAME_WITH_PEC ((uint32_t)(SMBUS_AUTOEND_MODE | SMBUS_SENDPEC_MODE))
+
+#define IS_SMBUS_TRANSFER_OPTIONS_REQUEST(REQUEST) (((REQUEST) == SMBUS_FIRST_FRAME) || \
+ ((REQUEST) == SMBUS_NEXT_FRAME) || \
+ ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_NO_PEC) || \
+ ((REQUEST) == SMBUS_LAST_FRAME_NO_PEC) || \
+ ((REQUEST) == SMBUS_FIRST_AND_LAST_FRAME_WITH_PEC) || \
+ ((REQUEST) == SMBUS_LAST_FRAME_WITH_PEC))
+
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_Interrupt_configuration_definition SMBUS Interrupt configuration definition
+ * @brief SMBUS Interrupt definition
+ * Elements values convention: 0xXXXXXXXX
+ * - XXXXXXXX : Interrupt control mask
+ * @{
+ */
+#define SMBUS_IT_ERRI I2C_CR1_ERRIE
+#define SMBUS_IT_TCI I2C_CR1_TCIE
+#define SMBUS_IT_STOPI I2C_CR1_STOPIE
+#define SMBUS_IT_NACKI I2C_CR1_NACKIE
+#define SMBUS_IT_ADDRI I2C_CR1_ADDRIE
+#define SMBUS_IT_RXI I2C_CR1_RXIE
+#define SMBUS_IT_TXI I2C_CR1_TXIE
+#define SMBUS_IT_TX (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_STOPI | SMBUS_IT_NACKI | SMBUS_IT_TXI)
+#define SMBUS_IT_RX (SMBUS_IT_ERRI | SMBUS_IT_TCI | SMBUS_IT_NACKI | SMBUS_IT_RXI)
+#define SMBUS_IT_ALERT (SMBUS_IT_ERRI)
+#define SMBUS_IT_ADDR (SMBUS_IT_ADDRI | SMBUS_IT_STOPI | SMBUS_IT_NACKI)
+/**
+ * @}
+ */
+
+/** @defgroup SMBUS_Flag_definition SMBUS Flag definition
+ * @brief Flag definition
+ * Elements values convention: 0xXXXXYYYY
+ * - XXXXXXXX : Flag mask
+ * @{
+ */
+
+#define SMBUS_FLAG_TXE I2C_ISR_TXE
+#define SMBUS_FLAG_TXIS I2C_ISR_TXIS
+#define SMBUS_FLAG_RXNE I2C_ISR_RXNE
+#define SMBUS_FLAG_ADDR I2C_ISR_ADDR
+#define SMBUS_FLAG_AF I2C_ISR_NACKF
+#define SMBUS_FLAG_STOPF I2C_ISR_STOPF
+#define SMBUS_FLAG_TC I2C_ISR_TC
+#define SMBUS_FLAG_TCR I2C_ISR_TCR
+#define SMBUS_FLAG_BERR I2C_ISR_BERR
+#define SMBUS_FLAG_ARLO I2C_ISR_ARLO
+#define SMBUS_FLAG_OVR I2C_ISR_OVR
+#define SMBUS_FLAG_PECERR I2C_ISR_PECERR
+#define SMBUS_FLAG_TIMEOUT I2C_ISR_TIMEOUT
+#define SMBUS_FLAG_ALERT I2C_ISR_ALERT
+#define SMBUS_FLAG_BUSY I2C_ISR_BUSY
+#define SMBUS_FLAG_DIR I2C_ISR_DIR
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup SMBUS_Exported_Macros SMBUS Exported Macros
+ * @{
+ */
+
+/** @brief Reset SMBUS handle state
+ * @param __HANDLE__: SMBUS handle.
+ * @retval None
+ */
+#define __HAL_SMBUS_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMBUS_STATE_RESET)
+
+/** @brief Enable or disable the specified SMBUS interrupts.
+ * @param __HANDLE__: specifies the SMBUS Handle.
+ * This parameter can be SMBUS where x: 1 or 2 to select the SMBUS peripheral.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg SMBUS_IT_ERRI: Errors interrupt enable
+ * @arg SMBUS_IT_TCI: Transfer complete interrupt enable
+ * @arg SMBUS_IT_STOPI: STOP detection interrupt enable
+ * @arg SMBUS_IT_NACKI: NACK received interrupt enable
+ * @arg SMBUS_IT_ADDRI: Address match interrupt enable
+ * @arg SMBUS_IT_RXI: RX interrupt enable
+ * @arg SMBUS_IT_TXI: TX interrupt enable
+ *
+ * @retval None
+ */
+
+#define __HAL_SMBUS_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__))
+#define __HAL_SMBUS_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__)))
+
+/** @brief Checks if the specified SMBUS interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the SMBUS Handle.
+ * This parameter can be SMBUS where x: 1 or 2 to select the SMBUS peripheral.
+ * @param __INTERRUPT__: specifies the SMBUS interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SMBUS_IT_ERRI: Errors interrupt enable
+ * @arg SMBUS_IT_TCI: Transfer complete interrupt enable
+ * @arg SMBUS_IT_STOPI: STOP detection interrupt enable
+ * @arg SMBUS_IT_NACKI: NACK received interrupt enable
+ * @arg SMBUS_IT_ADDRI: Address match interrupt enable
+ * @arg SMBUS_IT_RXI: RX interrupt enable
+ * @arg SMBUS_IT_TXI: TX interrupt enable
+ *
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SMBUS_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified SMBUS flag is set or not.
+ * @param __HANDLE__: specifies the SMBUS Handle.
+ * This parameter can be SMBUS where x: 1 or 2 to select the SMBUS peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SMBUS_FLAG_TXE: Transmit data register empty
+ * @arg SMBUS_FLAG_TXIS: Transmit interrupt status
+ * @arg SMBUS_FLAG_RXNE: Receive data register not empty
+ * @arg SMBUS_FLAG_ADDR: Address matched (slave mode)
+ * @arg SMBUS_FLAG_AF: NACK received flag
+ * @arg SMBUS_FLAG_STOPF: STOP detection flag
+ * @arg SMBUS_FLAG_TC: Transfer complete (master mode)
+ * @arg SMBUS_FLAG_TCR: Transfer complete reload
+ * @arg SMBUS_FLAG_BERR: Bus error
+ * @arg SMBUS_FLAG_ARLO: Arbitration lost
+ * @arg SMBUS_FLAG_OVR: Overrun/Underrun
+ * @arg SMBUS_FLAG_PECERR: PEC error in reception
+ * @arg SMBUS_FLAG_TIMEOUT: Timeout or Tlow detection flag
+ * @arg SMBUS_FLAG_ALERT: SMBus alert
+ * @arg SMBUS_FLAG_BUSY: Bus busy
+ * @arg SMBUS_FLAG_DIR: Transfer direction (slave mode)
+ *
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define SMBUS_FLAG_MASK ((uint32_t)0x0001FFFF)
+#define __HAL_SMBUS_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__) & SMBUS_FLAG_MASK)) == ((__FLAG__) & SMBUS_FLAG_MASK)))
+
+/** @brief Clears the SMBUS pending flags which are cleared by writing 1 in a specific bit.
+ * @param __HANDLE__: specifies the SMBUS Handle.
+ * This parameter can be SMBUS where x: 1 or 2 to select the SMBUS peripheral.
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg SMBUS_FLAG_ADDR: Address matched (slave mode)
+ * @arg SMBUS_FLAG_AF: NACK received flag
+ * @arg SMBUS_FLAG_STOPF: STOP detection flag
+ * @arg SMBUS_FLAG_BERR: Bus error
+ * @arg SMBUS_FLAG_ARLO: Arbitration lost
+ * @arg SMBUS_FLAG_OVR: Overrun/Underrun
+ * @arg SMBUS_FLAG_PECERR: PEC error in reception
+ * @arg SMBUS_FLAG_TIMEOUT: Timeout or Tlow detection flag
+ * @arg SMBUS_FLAG_ALERT: SMBus alert
+ *
+ * @retval None
+ */
+#define __HAL_SMBUS_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+
+#define __HAL_SMBUS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= I2C_CR1_PE)
+#define __HAL_SMBUS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~I2C_CR1_PE)
+
+#define __HAL_SMBUS_RESET_CR1(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (uint32_t)~((uint32_t)(I2C_CR1_SMBHEN | I2C_CR1_SMBDEN | I2C_CR1_PECEN)))
+#define __HAL_SMBUS_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(I2C_CR2_SADD | I2C_CR2_HEAD10R | I2C_CR2_NBYTES | I2C_CR2_RELOAD | I2C_CR2_RD_WRN)))
+
+#define __HAL_SMBUS_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == SMBUS_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_START) | (I2C_CR2_AUTOEND)) & (~I2C_CR2_RD_WRN)) : \
+ (uint32_t)((((uint32_t)(__ADDRESS__) & (I2C_CR2_SADD)) | (I2C_CR2_ADD10) | (I2C_CR2_START)) & (~I2C_CR2_RD_WRN)))
+
+#define __HAL_SMBUS_GET_ADDR_MATCH(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_ADDCODE) >> 17)
+#define __HAL_SMBUS_GET_DIR(__HANDLE__) (((__HANDLE__)->Instance->ISR & I2C_ISR_DIR) >> 16)
+#define __HAL_SMBUS_GET_STOP_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_AUTOEND)
+#define __HAL_SMBUS_GET_PEC_MODE(__HANDLE__) ((__HANDLE__)->Instance->CR2 & I2C_CR2_PECBYTE)
+#define __HAL_SMBUS_GET_ALERT_ENABLED(__HANDLE__) ((__HANDLE__)->Instance->CR1 & I2C_CR1_ALERTEN)
+#define __HAL_SMBUS_GENERATE_NACK(__HANDLE__) ((__HANDLE__)->Instance->CR2 |= I2C_CR2_NACK)
+
+#define IS_SMBUS_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= (uint32_t)0x000003FF)
+#define IS_SMBUS_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FF)
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SMBUS_Exported_Functions SMBUS Exported Functions
+ * @{
+ */
+
+/** @addtogroup SMBUS_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SMBUS_Init(SMBUS_HandleTypeDef *hsmbus);
+HAL_StatusTypeDef HAL_SMBUS_DeInit (SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_MspInit(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_MspDeInit(SMBUS_HandleTypeDef *hsmbus);
+
+/**
+ * @}
+ */
+
+/** @addtogroup SMBUS_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+/** @addtogroup Blocking_mode_Polling Blocking mode Polling
+ * @{
+ */
+/******* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_SMBUS_IsDeviceReady(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/** @addtogroup Non-Blocking_mode_Interrupt Non-Blocking mode Interrupt
+ * @{
+ */
+ /******* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_SMBUS_Master_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_SMBUS_Master_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_SMBUS_Master_Abort_IT(SMBUS_HandleTypeDef *hsmbus, uint16_t DevAddress);
+HAL_StatusTypeDef HAL_SMBUS_Slave_Transmit_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+HAL_StatusTypeDef HAL_SMBUS_Slave_Receive_IT(SMBUS_HandleTypeDef *hsmbus, uint8_t *pData, uint16_t Size, uint32_t XferOptions);
+
+HAL_StatusTypeDef HAL_SMBUS_EnableAlert_IT(SMBUS_HandleTypeDef *hsmbus);
+HAL_StatusTypeDef HAL_SMBUS_DisableAlert_IT(SMBUS_HandleTypeDef *hsmbus);
+HAL_StatusTypeDef HAL_SMBUS_Slave_Listen_IT(SMBUS_HandleTypeDef *hsmbus);
+HAL_StatusTypeDef HAL_SMBUS_DisableListen_IT(SMBUS_HandleTypeDef *hsmbus);
+/** @defgroup Aliases_Exported_Functions Aliases for Exported Functions
+ * @brief Aliases for new API and to insure inter STM32 series compatibility
+ * @{
+ */
+/* Aliases for new API and to insure inter STM32 series compatibility */
+#define HAL_SMBUS_EnableListen_IT HAL_SMBUS_Slave_Listen_IT
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup IRQ_Handler_and_Callbacks IRQ Handler and Callbacks
+ * @{
+ */
+ /******* SMBUS IRQHandler and Callbacks used in non blocking modes (Interrupt) */
+void HAL_SMBUS_EV_IRQHandler(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_ER_IRQHandler(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_MasterTxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_MasterRxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_SlaveTxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_SlaveRxCpltCallback(SMBUS_HandleTypeDef *hsmbus);
+void HAL_SMBUS_SlaveAddrCallback(SMBUS_HandleTypeDef *hsmbus, uint8_t TransferDirection, uint16_t AddrMatchCode);
+void HAL_SMBUS_SlaveListenCpltCallback(SMBUS_HandleTypeDef *hsmbus);
+
+/** @addtogroup Aliases_Exported_Functions Aliases for Exported Functions
+ * @brief Aliases for new API and to insure inter STM32 series compatibility
+ * @{
+ */
+/* Aliases for new API and to insure inter STM32 series compatibility */
+#define HAL_SMBUS_AddrCallback HAL_SMBUS_SlaveAddrCallback
+#define HAL_SMBUS_ListenCpltCallback HAL_SMBUS_SlaveListenCpltCallback
+/**
+ * @}
+ */
+
+void HAL_SMBUS_ErrorCallback(SMBUS_HandleTypeDef *hsmbus);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup SMBUS_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @{
+ */
+
+/* Peripheral State and Errors functions **************************************************/
+HAL_SMBUS_StateTypeDef HAL_SMBUS_GetState(SMBUS_HandleTypeDef *hsmbus);
+uint32_t HAL_SMBUS_GetError(SMBUS_HandleTypeDef *hsmbus);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_SMBUS_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_spi.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,684 @@
+ /**
+ ******************************************************************************
+ * @file stm32f3xx_hal_spi.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of SPI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_SPI_H
+#define __STM32F3xx_HAL_SPI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SPI
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SPI_Exported_Types SPI Exported Types
+ * @{
+ */
+
+/**
+ * @brief SPI Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Specifies the SPI operating mode.
+ This parameter can be a value of @ref SPI_mode */
+
+ uint32_t Direction; /*!< Specifies the SPI bidirectional mode state.
+ This parameter can be a value of @ref SPI_Direction */
+
+ uint32_t DataSize; /*!< Specifies the SPI data size.
+ This parameter can be a value of @ref SPI_data_size */
+
+ uint32_t CLKPolarity; /*!< Specifies the serial clock steady state.
+ This parameter can be a value of @ref SPI_Clock_Polarity */
+
+ uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture.
+ This parameter can be a value of @ref SPI_Clock_Phase */
+
+ uint32_t NSS; /*!< Specifies whether the NSS signal is managed by
+ hardware (NSS pin) or by software using the SSI bit.
+ This parameter can be a value of @ref SPI_Slave_Select_management */
+
+ uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be
+ used to configure the transmit and receive SCK clock.
+ This parameter can be a value of @ref SPI_BaudRate_Prescaler
+ @note The communication clock is derived from the master
+ clock. The slave clock does not need to be set. */
+
+ uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
+ This parameter can be a value of @ref SPI_MSB_LSB_transmission */
+
+ uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not .
+ This parameter can be a value of @ref SPI_TI_mode */
+
+ uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not.
+ This parameter can be a value of @ref SPI_CRC_Calculation */
+
+ uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 65535 */
+
+ uint32_t CRCLength; /*!< Specifies the CRC Length used for the CRC calculation.
+ CRC Length is only used with Data8 and Data16, not other data size
+ This parameter must 0 or 1 or 2*/
+
+ uint32_t NSSPMode; /*!< Specifies whether the NSSP signal is enabled or not .
+ This mode is activated by the NSSP bit in the SPIx_CR2 register and
+ it takes effect only if the SPI interface is configured as Motorola SPI
+ master (FRF=0) with capture on the first edge (SPIx_CR1 CPHA = 0,
+ CPOL setting is ignored).. */
+} SPI_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_SPI_STATE_RESET = 0x00, /*!< Peripheral not Initialized */
+ HAL_SPI_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_SPI_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_SPI_STATE_BUSY_TX = 0x03, /*!< Data Transmission process is ongoing */
+ HAL_SPI_STATE_BUSY_RX = 0x04, /*!< Data Reception process is ongoing */
+ HAL_SPI_STATE_BUSY_TX_RX = 0x05, /*!< Data Transmission and Reception process is ongoing */
+ HAL_SPI_STATE_TIMEOUT = 0x06, /*!< Timeout state */
+ HAL_SPI_STATE_ERROR = 0x07 /*!< Data Transmission and Reception process is ongoing */
+
+}HAL_SPI_StateTypeDef;
+
+/**
+ * @brief HAL SPI Error Code structure definition
+ */
+typedef enum
+{
+ HAL_SPI_ERROR_NONE = 0x00, /*!< No error */
+ HAL_SPI_ERROR_MODF = 0x01, /*!< MODF error */
+ HAL_SPI_ERROR_CRC = 0x02, /*!< CRC error */
+ HAL_SPI_ERROR_OVR = 0x04, /*!< OVR error */
+ HAL_SPI_ERROR_FRE = 0x08, /*!< FRE error */
+ HAL_SPI_ERROR_DMA = 0x10, /*!< DMA transfer error */
+ HAL_SPI_ERROR_FLAG = 0x20, /*!< Error on BSY/TXE/FTLVL/FRLVL Flag */
+ HAL_SPI_ERROR_UNKNOW = 0x40, /*!< Unknow Error error */
+}HAL_SPI_ErrorTypeDef;
+
+/**
+ * @brief SPI handle Structure definition
+ */
+typedef struct __SPI_HandleTypeDef
+{
+ SPI_TypeDef *Instance; /* SPI registers base address */
+
+ SPI_InitTypeDef Init; /* SPI communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to SPI Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* SPI Tx Transfer size */
+
+ uint16_t TxXferCount; /* SPI Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to SPI Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* SPI Rx Transfer size */
+
+ uint16_t RxXferCount; /* SPI Rx Transfer Counter */
+
+ uint32_t CRCSize; /* SPI CRC size used for the transfer */
+
+ void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /* function pointer on Rx IRQ handler */
+
+ void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /* function pointer on Tx IRQ handler */
+
+ DMA_HandleTypeDef *hdmatx; /* SPI Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* SPI Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ HAL_SPI_StateTypeDef State; /* SPI communication state */
+
+ HAL_SPI_ErrorTypeDef ErrorCode; /* SPI Error code */
+
+}SPI_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup SPI_Exported_Constants SPI Exported Constants
+ * @{
+ */
+
+/** @defgroup SPI_mode SPI mode
+ * @{
+ */
+
+#define SPI_MODE_SLAVE ((uint32_t)0x00000000)
+#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI)
+#define IS_SPI_MODE(MODE) (((MODE) == SPI_MODE_SLAVE) || \
+ ((MODE) == SPI_MODE_MASTER))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Direction SPI Direction
+ * @{
+ */
+#define SPI_DIRECTION_2LINES ((uint32_t)0x00000000)
+#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY
+#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE
+
+#define IS_SPI_DIRECTION(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \
+ ((MODE) == SPI_DIRECTION_2LINES_RXONLY) ||\
+ ((MODE) == SPI_DIRECTION_1LINE))
+
+#define IS_SPI_DIRECTION_2LINES(MODE) ((MODE) == SPI_DIRECTION_2LINES)
+
+#define IS_SPI_DIRECTION_2LINES_OR_1LINE(MODE) (((MODE) == SPI_DIRECTION_2LINES)|| \
+ ((MODE) == SPI_DIRECTION_1LINE))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_data_size SPI data size
+ * @{
+ */
+
+#define SPI_DATASIZE_4BIT ((uint16_t)0x0300)
+#define SPI_DATASIZE_5BIT ((uint16_t)0x0400)
+#define SPI_DATASIZE_6BIT ((uint16_t)0x0500)
+#define SPI_DATASIZE_7BIT ((uint16_t)0x0600)
+#define SPI_DATASIZE_8BIT ((uint16_t)0x0700)
+#define SPI_DATASIZE_9BIT ((uint16_t)0x0800)
+#define SPI_DATASIZE_10BIT ((uint16_t)0x0900)
+#define SPI_DATASIZE_11BIT ((uint16_t)0x0A00)
+#define SPI_DATASIZE_12BIT ((uint16_t)0x0B00)
+#define SPI_DATASIZE_13BIT ((uint16_t)0x0C00)
+#define SPI_DATASIZE_14BIT ((uint16_t)0x0D00)
+#define SPI_DATASIZE_15BIT ((uint16_t)0x0E00)
+#define SPI_DATASIZE_16BIT ((uint16_t)0x0F00)
+#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DATASIZE_16BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_15BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_14BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_13BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_12BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_11BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_10BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_9BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_8BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_7BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_6BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_5BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_4BIT))
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Polarity SPI Clock Polarity
+ * @{
+ */
+
+#define SPI_POLARITY_LOW ((uint32_t)0x00000000)
+#define SPI_POLARITY_HIGH SPI_CR1_CPOL
+#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_POLARITY_LOW) || \
+ ((CPOL) == SPI_POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Phase SPI Clock Phase
+ * @{
+ */
+
+#define SPI_PHASE_1EDGE ((uint32_t)0x00000000)
+#define SPI_PHASE_2EDGE SPI_CR1_CPHA
+#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_PHASE_1EDGE) || \
+ ((CPHA) == SPI_PHASE_2EDGE))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Slave_Select_management SPI Slave Select management
+ * @{
+ */
+
+#define SPI_NSS_SOFT SPI_CR1_SSM
+#define SPI_NSS_HARD_INPUT ((uint32_t)0x00000000)
+#define SPI_NSS_HARD_OUTPUT ((uint32_t)0x00040000)
+#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_SOFT) || \
+ ((NSS) == SPI_NSS_HARD_INPUT) || \
+ ((NSS) == SPI_NSS_HARD_OUTPUT))
+
+ /**
+ * @}
+ */
+
+
+/** @defgroup SPI_NSS SPI NSS pulse management
+ * @{
+ */
+#define SPI_NSS_PULSE_ENABLED SPI_CR2_NSSP
+#define SPI_NSS_PULSE_DISABLED ((uint32_t)0x00000000)
+
+#define IS_SPI_NSSP(NSSP) (((NSSP) == SPI_NSS_PULSE_ENABLED) || \
+ ((NSSP) == SPI_NSS_PULSE_DISABLED))
+
+/**
+ * @}
+ */
+
+
+/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler
+ * @{
+ */
+
+#define SPI_BAUDRATEPRESCALER_2 ((uint32_t)0x00000000)
+#define SPI_BAUDRATEPRESCALER_4 ((uint32_t)0x00000008)
+#define SPI_BAUDRATEPRESCALER_8 ((uint32_t)0x00000010)
+#define SPI_BAUDRATEPRESCALER_16 ((uint32_t)0x00000018)
+#define SPI_BAUDRATEPRESCALER_32 ((uint32_t)0x00000020)
+#define SPI_BAUDRATEPRESCALER_64 ((uint32_t)0x00000028)
+#define SPI_BAUDRATEPRESCALER_128 ((uint32_t)0x00000030)
+#define SPI_BAUDRATEPRESCALER_256 ((uint32_t)0x00000038)
+#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BAUDRATEPRESCALER_2) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_4) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_8) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_16) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_32) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_64) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_128) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_256))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB transmission
+ * @{
+ */
+
+#define SPI_FIRSTBIT_MSB ((uint32_t)0x00000000)
+#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST
+#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FIRSTBIT_MSB) || \
+ ((BIT) == SPI_FIRSTBIT_LSB))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_TI_mode SPI TI mode
+ * @{
+ */
+
+#define SPI_TIMODE_DISABLED ((uint32_t)0x00000000)
+#define SPI_TIMODE_ENABLED SPI_CR2_FRF
+#define IS_SPI_TIMODE(MODE) (((MODE) == SPI_TIMODE_DISABLED) || \
+ ((MODE) == SPI_TIMODE_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_CRC_Calculation SPI CRC Calculation
+ * @{
+ */
+
+#define SPI_CRCCALCULATION_DISABLED ((uint32_t)0x00000000)
+#define SPI_CRCCALCULATION_ENABLED SPI_CR1_CRCEN
+#define IS_SPI_CRC_CALCULATION(CALCULATION) (((CALCULATION) == SPI_CRCCALCULATION_DISABLED) || \
+ ((CALCULATION) == SPI_CRCCALCULATION_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_CRC_length SPI CRC length
+ * @{
+ * This parameter can be one of the following values:
+ * SPI_CRC_LENGTH_DATASIZE: aligned with the data size
+ * SPI_CRC_LENGTH_8BIT : CRC 8bit
+ * SPI_CRC_LENGTH_16BIT : CRC 16bit
+ */
+#define SPI_CRC_LENGTH_DATASIZE 0
+#define SPI_CRC_LENGTH_8BIT 1
+#define SPI_CRC_LENGTH_16BIT 2
+#define IS_SPI_CRC_LENGTH(LENGTH) (((LENGTH) == SPI_CRC_LENGTH_DATASIZE) ||\
+ ((LENGTH) == SPI_CRC_LENGTH_8BIT) || \
+ ((LENGTH) == SPI_CRC_LENGTH_16BIT))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_FIFO_reception_threshold SPI FIFO reception threshold
+ * @{
+ * This parameter can be one of the following values:
+ * SPI_RxFIFOThreshold_HF: RXNE event is generated if the FIFO
+ * level is greater or equal to 1/2(16-bits).
+ * SPI_RxFIFOThreshold_QF: RXNE event is generated if the FIFO
+ * level is greater or equal to 1/4(8 bits).
+ */
+#define SPI_RXFIFO_THRESHOLD SPI_CR2_FRXTH
+#define SPI_RXFIFO_THRESHOLD_QF SPI_CR2_FRXTH
+#define SPI_RXFIFO_THRESHOLD_HF ((uint32_t)0x0)
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Interrupt_configuration_definition SPI Interrupt configuration definition
+ * @brief SPI Interrupt definition
+ * Elements values convention: 0xXXXXXXXX
+ * - XXXXXXXX : Interrupt control mask
+ * @{
+ */
+#define SPI_IT_TXE SPI_CR2_TXEIE
+#define SPI_IT_RXNE SPI_CR2_RXNEIE
+#define SPI_IT_ERR SPI_CR2_ERRIE
+#define IS_SPI_IT(IT) (((IT) == SPI_IT_TXE) || \
+ ((IT) == SPI_IT_RXNE) || \
+ ((IT) == SPI_IT_ERR))
+/**
+ * @}
+ */
+
+
+/** @defgroup SPI_Flag_definition SPI Flag definition
+ * @brief Flag definition
+ * Elements values convention: 0xXXXXYYYY
+ * - XXXX : Flag register Index
+ * - YYYY : Flag mask
+ * @{
+ */
+#define SPI_FLAG_RXNE SPI_SR_RXNE /* SPI status flag: Rx buffer not empty flag */
+#define SPI_FLAG_TXE SPI_SR_TXE /* SPI status flag: Tx buffer empty flag */
+#define SPI_FLAG_BSY SPI_SR_BSY /* SPI status flag: Busy flag */
+#define SPI_FLAG_CRCERR SPI_SR_CRCERR /* SPI Error flag: CRC error flag */
+#define SPI_FLAG_MODF SPI_SR_MODF /* SPI Error flag: Mode fault flag */
+#define SPI_FLAG_OVR SPI_SR_OVR /* SPI Error flag: Overrun flag */
+#define SPI_FLAG_FRE SPI_SR_FRE /* SPI Error flag: TI mode frame format error flag */
+#define SPI_FLAG_FTLVL SPI_SR_FTLVL /* SPI fifo transmission level */
+#define SPI_FLAG_FRLVL SPI_SR_FRLVL /* SPI fifo reception level */
+#define IS_SPI_FLAG(FLAG) (((FLAG) == SPI_FLAG_RXNE) || \
+ ((FLAG) == SPI_FLAG_TXE) || \
+ ((FLAG) == SPI_FLAG_BSY) || \
+ ((FLAG) == SPI_FLAG_CRCERR)|| \
+ ((FLAG) == SPI_FLAG_MODF) || \
+ ((FLAG) == SPI_FLAG_OVR) || \
+ ((FLAG) == SPI_FLAG_FTLVL) || \
+ ((FLAG) == SPI_FLAG_FRLVL) || \
+ ((FLAG) == SPI_IT_FRE))
+/**
+ * @}
+ */
+
+
+/** @defgroup SPI_transmission_fifo_status_level SPI transmission fifo status level
+ * @{
+ */
+
+#define SPI_FTLVL_EMPTY ((uint16_t)0x0000)
+#define SPI_FTLVL_QUARTER_FULL ((uint16_t)0x0800)
+#define SPI_FTLVL_HALF_FULL ((uint16_t)0x1000)
+#define SPI_FTLVL_FULL ((uint16_t)0x1800)
+
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_reception_fifo_status_level SPI reception fifo status level
+ * @{
+ */
+#define SPI_FRLVL_EMPTY ((uint16_t)0x0000)
+#define SPI_FRLVL_QUARTER_FULL ((uint16_t)0x0200)
+#define SPI_FRLVL_HALF_FULL ((uint16_t)0x0400)
+#define SPI_FRLVL_FULL ((uint16_t)0x0600)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup SPI_Exported_Macros SPI Exported Macros
+ * @{
+ */
+
+/** @brief Reset SPI handle state
+ * @param __HANDLE__: SPI handle.
+ * @retval None
+ */
+#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
+
+/** @brief Enables or disables the specified SPI interrupts.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+
+#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
+#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__)))
+
+/** @brief Checks if the specified SPI interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __INTERRUPT__: specifies the SPI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Checks whether the specified SPI flag is set or not.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_FLAG_RXNE: Receive buffer not empty flag
+ * @arg SPI_FLAG_TXE: Transmit buffer empty flag
+ * @arg SPI_FLAG_CRCERR: CRC error flag
+ * @arg SPI_FLAG_MODF: Mode fault flag
+ * @arg SPI_FLAG_OVR: Overrun flag
+ * @arg SPI_FLAG_BSY: Busy flag
+ * @arg SPI_FLAG_FRE: Frame format error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clears the SPI CRCERR pending flag.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = ~(SPI_FLAG_CRCERR))
+
+/** @brief Clears the SPI MODF pending flag.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ *
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) do{(__HANDLE__)->Instance->SR;\
+ (__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE);}while(0)
+
+/** @brief Clears the SPI OVR pending flag.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ *
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) do{(__HANDLE__)->Instance->DR;\
+ (__HANDLE__)->Instance->SR;}while(0)
+
+/** @brief Clears the SPI FRE pending flag.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ *
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR)
+
+/** @brief Enables the SPI.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_SPE)
+
+/** @brief Disables the SPI.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~SPI_CR1_SPE)
+
+/** @brief Sets the SPI transmit-only mode.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_1LINE_TX(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_BIDIOE)
+
+/** @brief Sets the SPI receive-only mode.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_1LINE_RX(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~SPI_CR1_BIDIOE)
+
+/** @brief Resets the CRC calculation of the SPI.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_RESET_CRC(__HANDLE__) do{(__HANDLE__)->Instance->CR1 &= (~SPI_CR1_CRCEN);\
+ (__HANDLE__)->Instance->CR1 |= SPI_CR1_CRCEN;}while(0)
+
+
+#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) (((POLYNOMIAL) >= 0x1) && ((POLYNOMIAL) <= 0xFFFF))
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SPI_Exported_Functions SPI Exported Functions
+ * @{
+ */
+
+/** @addtogroup SPI_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_InitExtended(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DeInit (SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi);
+/**
+ * @}
+ */
+
+/** @addtogroup SPI_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
+/**
+ * @}
+ */
+
+/** @addtogroup SPI_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+
+/* Peripheral State and Error functions ***************************************/
+HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_SPI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_sram.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,202 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_sram.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of SRAM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_SRAM_H
+#define __STM32F3xx_HAL_SRAM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+ #include "stm32f3xx_ll_fmc.h"
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SRAM
+ * @{
+ */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+
+/* Exported typedef ----------------------------------------------------------*/
+
+/** @defgroup SRAM_Exported_Types SRAM Exported Types
+ * @{
+ */
+/**
+ * @brief HAL SRAM State structures definition
+ */
+typedef enum
+{
+ HAL_SRAM_STATE_RESET = 0x00, /*!< SRAM not yet initialized or disabled */
+ HAL_SRAM_STATE_READY = 0x01, /*!< SRAM initialized and ready for use */
+ HAL_SRAM_STATE_BUSY = 0x02, /*!< SRAM internal process is ongoing */
+ HAL_SRAM_STATE_ERROR = 0x03, /*!< SRAM error state */
+ HAL_SRAM_STATE_PROTECTED = 0x04 /*!< SRAM peripheral NORSRAM device write protected */
+
+}HAL_SRAM_StateTypeDef;
+
+/**
+ * @brief SRAM handle Structure definition
+ */
+typedef struct
+{
+ FMC_NORSRAM_TypeDef *Instance; /*!< Register base address */
+
+ FMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */
+
+ FMC_NORSRAM_InitTypeDef Init; /*!< SRAM device control configuration parameters */
+
+ HAL_LockTypeDef Lock; /*!< SRAM locking object */
+
+ __IO HAL_SRAM_StateTypeDef State; /*!< SRAM device access state */
+
+ DMA_HandleTypeDef *hdma; /*!< Pointer DMA handler */
+
+}SRAM_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup SRAM_Exported_Macros SRAM Exported Macros
+ * @{
+ */
+
+/** @brief Reset SRAM handle state
+ * @param __HANDLE__: SRAM handle
+ * @retval None
+ */
+#define __HAL_SRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SRAM_STATE_RESET)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SRAM_Exported_Functions SRAM Exported Functions
+ * @{
+ */
+
+/** @addtogroup SRAM_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming);
+HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram);
+void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram);
+void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram);
+
+void HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma);
+void HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma);
+
+/**
+ * @}
+ */
+
+/** @addtogroup SRAM_Exported_Functions_Group2 Input Output and memory control functions
+ * @{
+ */
+
+/* I/O operation functions ***************************************************/
+HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize);
+HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize);
+
+/**
+ * @}
+ */
+
+/** @addtogroup SRAM_Exported_Functions_Group3 Control functions
+ * @{
+ */
+
+/* SRAM Control functions ****************************************************/
+HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram);
+HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram);
+
+/**
+ * @}
+ */
+
+/** @addtogroup SRAM_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+
+/* SRAM Peripheral State functions ********************************************/
+HAL_SRAM_StateTypeDef HAL_SRAM_GetState(SRAM_HandleTypeDef *hsram);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_SRAM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_tim.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1451 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_tim.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of TIM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_TIM_H
+#define __STM32F3xx_HAL_TIM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TIM
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIM_Exported_Types TIM Exported Types
+ * @{
+ */
+
+/**
+ * @brief TIM Time base Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t CounterMode; /*!< Specifies the counter mode.
+ This parameter can be a value of @ref TIM_Counter_Mode */
+
+ uint32_t Period; /*!< Specifies the period value to be loaded into the active
+ Auto-Reload Register at the next update event.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */
+
+ uint32_t ClockDivision; /*!< Specifies the clock division.
+ This parameter can be a value of @ref TIM_ClockDivision */
+
+ uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter
+ reaches zero, an update event is generated and counting restarts
+ from the RCR value (N).
+ This means in PWM mode that (N+1) corresponds to:
+ - the number of PWM periods in edge-aligned mode
+ - the number of half PWM period in center-aligned mode
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_Base_InitTypeDef;
+
+/**
+ * @brief TIM Output Compare Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIMEx_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCFastMode; /*!< Specifies the Fast mode state.
+ This parameter can be a value of @ref TIM_Output_Fast_State
+ @note This parameter is valid only in PWM1 and PWM2 mode. */
+
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+} TIM_OC_InitTypeDef;
+
+/**
+ * @brief TIM One Pulse Mode Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t OCMode; /*!< Specifies the TIM mode.
+ This parameter can be a value of @ref TIMEx_Output_Compare_and_PWM_modes */
+
+ uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+
+ uint32_t OCPolarity; /*!< Specifies the output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_Polarity */
+
+ uint32_t OCNPolarity; /*!< Specifies the complementary output polarity.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Polarity
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state.
+ This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State
+ @note This parameter is valid only for TIM1 and TIM8. */
+
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_OnePulse_InitTypeDef;
+
+
+/**
+ * @brief TIM Input Capture Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t ICPolarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t ICSelection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t ICFilter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_IC_InitTypeDef;
+
+/**
+ * @brief TIM Encoder Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t EncoderMode; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Encoder_Mode */
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+
+ uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC2Selection; /*!< Specifies the input.
+ This parameter can be a value of @ref TIM_Input_Capture_Selection */
+
+ uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC2Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+} TIM_Encoder_InitTypeDef;
+
+
+/**
+ * @brief Clock Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClockSource; /*!< TIM clock sources
+ This parameter can be a value of @ref TIM_Clock_Source */
+ uint32_t ClockPolarity; /*!< TIM clock polarity
+ This parameter can be a value of @ref TIM_Clock_Polarity */
+ uint32_t ClockPrescaler; /*!< TIM clock prescaler
+ This parameter can be a value of @ref TIM_Clock_Prescaler */
+ uint32_t ClockFilter; /*!< TIM clock filter
+ This parameter can be a value of @ref TIM_Clock_Filter */
+}TIM_ClockConfigTypeDef;
+
+/**
+ * @brief Clear Input Configuration Handle Structure definition
+ */
+typedef struct
+{
+ uint32_t ClearInputState; /*!< TIM clear Input state
+ This parameter can be ENABLE or DISABLE */
+ uint32_t ClearInputSource; /*!< TIM clear Input sources
+ This parameter can be a value of @ref TIMEx_ClearInput_Source */
+ uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity
+ This parameter can be a value of @ref TIM_ClearInput_Polarity */
+ uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler
+ This parameter can be a value of @ref TIM_ClearInput_Prescaler */
+ uint32_t ClearInputFilter; /*!< TIM Clear Input filter
+ This parameter can be a value of @ref TIM_ClearInput_Filter */
+}TIM_ClearInputConfigTypeDef;
+
+/**
+ * @brief TIM Slave configuration Structure definition
+ */
+typedef struct {
+ uint32_t SlaveMode; /*!< Slave mode selection
+ This parameter can be a value of @ref TIMEx_Slave_Mode */
+ uint32_t InputTrigger; /*!< Input Trigger source
+ This parameter can be a value of @ref TIM_Trigger_Selection */
+ uint32_t TriggerPolarity; /*!< Input Trigger polarity
+ This parameter can be a value of @ref TIM_Trigger_Polarity */
+ uint32_t TriggerPrescaler; /*!< Input trigger prescaler
+ This parameter can be a value of @ref TIM_Trigger_Prescaler */
+ uint32_t TriggerFilter; /*!< Input trigger filter
+ This parameter can be a value of @ref TIM_Trigger_Filter */
+
+}TIM_SlaveConfigTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_TIM_STATE_RESET = 0x00, /*!< Peripheral not yet initialized or disabled */
+ HAL_TIM_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_TIM_STATE_BUSY = 0x02, /*!< An internal process is ongoing */
+ HAL_TIM_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_TIM_STATE_ERROR = 0x04 /*!< Reception process is ongoing */
+}HAL_TIM_StateTypeDef;
+
+/**
+ * @brief HAL Active channel structures definition
+ */
+typedef enum
+{
+ HAL_TIM_ACTIVE_CHANNEL_1 = 0x01, /*!< The active channel is 1 */
+ HAL_TIM_ACTIVE_CHANNEL_2 = 0x02, /*!< The active channel is 2 */
+ HAL_TIM_ACTIVE_CHANNEL_3 = 0x04, /*!< The active channel is 3 */
+ HAL_TIM_ACTIVE_CHANNEL_4 = 0x08, /*!< The active channel is 4 */
+ HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00 /*!< All active channels cleared */
+}HAL_TIM_ActiveChannel;
+
+/**
+ * @brief TIM Time Base Handle Structure definition
+ */
+typedef struct
+{
+ TIM_TypeDef *Instance; /*!< Register base address */
+ TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */
+ HAL_TIM_ActiveChannel Channel; /*!< Active channel */
+ DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array
+ This array is accessed by a @ref DMA_Handle_index */
+ HAL_LockTypeDef Lock; /*!< Locking object */
+ __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */
+}TIM_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIM_Exported_Constants TIM Exported Constants
+ * @{
+ */
+
+/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel polarity
+ * @{
+ */
+#define TIM_INPUTCHANNELPOLARITY_RISING ((uint32_t)0x00000000) /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_FALLING (TIM_CCER_CC1P) /*!< Polarity for TIx source */
+#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Polarity TIM ETR Polarity
+ * @{
+ */
+#define TIM_ETRPOLARITY_INVERTED (TIM_SMCR_ETP) /*!< Polarity for ETR source */
+#define TIM_ETRPOLARITY_NONINVERTED ((uint32_t)0x0000) /*!< Polarity for ETR source */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler
+ * @{
+ */
+#define TIM_ETRPRESCALER_DIV1 ((uint32_t)0x0000) /*!< No prescaler is used */
+#define TIM_ETRPRESCALER_DIV2 (TIM_SMCR_ETPS_0) /*!< ETR input source is divided by 2 */
+#define TIM_ETRPRESCALER_DIV4 (TIM_SMCR_ETPS_1) /*!< ETR input source is divided by 4 */
+#define TIM_ETRPRESCALER_DIV8 (TIM_SMCR_ETPS) /*!< ETR input source is divided by 8 */
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Counter_Mode TIM Counter Mode
+ * @{
+ */
+
+#define TIM_COUNTERMODE_UP ((uint32_t)0x0000)
+#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR
+#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0
+#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1
+#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS
+
+#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_COUNTERMODE_UP) || \
+ ((MODE) == TIM_COUNTERMODE_DOWN) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED1) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED2) || \
+ ((MODE) == TIM_COUNTERMODE_CENTERALIGNED3))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClockDivision TIM Clock Division
+ * @{
+ */
+
+#define TIM_CLOCKDIVISION_DIV1 ((uint32_t)0x0000)
+#define TIM_CLOCKDIVISION_DIV2 (TIM_CR1_CKD_0)
+#define TIM_CLOCKDIVISION_DIV4 (TIM_CR1_CKD_1)
+
+#define IS_TIM_CLOCKDIVISION_DIV(DIV) (((DIV) == TIM_CLOCKDIVISION_DIV1) || \
+ ((DIV) == TIM_CLOCKDIVISION_DIV2) || \
+ ((DIV) == TIM_CLOCKDIVISION_DIV4))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_State TIM Output Compare State
+ * @{
+ */
+
+#define TIM_OUTPUTSTATE_DISABLE ((uint32_t)0x0000)
+#define TIM_OUTPUTSTATE_ENABLE (TIM_CCER_CC1E)
+
+#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OUTPUTSTATE_DISABLE) || \
+ ((STATE) == TIM_OUTPUTSTATE_ENABLE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Output_Fast_State TIM Output Fast State
+ * @{
+ */
+#define TIM_OCFAST_DISABLE ((uint32_t)0x0000)
+#define TIM_OCFAST_ENABLE (TIM_CCMR1_OC1FE)
+
+#define IS_TIM_FAST_STATE(STATE) (((STATE) == TIM_OCFAST_DISABLE) || \
+ ((STATE) == TIM_OCFAST_ENABLE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State
+ * @{
+ */
+
+#define TIM_OUTPUTNSTATE_DISABLE ((uint32_t)0x0000)
+#define TIM_OUTPUTNSTATE_ENABLE (TIM_CCER_CC1NE)
+
+#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OUTPUTNSTATE_DISABLE) || \
+ ((STATE) == TIM_OUTPUTNSTATE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity
+ * @{
+ */
+
+#define TIM_OCPOLARITY_HIGH ((uint32_t)0x0000)
+#define TIM_OCPOLARITY_LOW (TIM_CCER_CC1P)
+
+#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPOLARITY_HIGH) || \
+ ((POLARITY) == TIM_OCPOLARITY_LOW))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity
+ * @{
+ */
+
+#define TIM_OCNPOLARITY_HIGH ((uint32_t)0x0000)
+#define TIM_OCNPOLARITY_LOW (TIM_CCER_CC1NP)
+
+#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPOLARITY_HIGH) || \
+ ((POLARITY) == TIM_OCNPOLARITY_LOW))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State
+ * @{
+ */
+
+#define TIM_OCIDLESTATE_SET (TIM_CR2_OIS1)
+#define TIM_OCIDLESTATE_RESET ((uint32_t)0x0000)
+#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIDLESTATE_SET) || \
+ ((STATE) == TIM_OCIDLESTATE_RESET))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State
+ * @{
+ */
+
+#define TIM_OCNIDLESTATE_SET (TIM_CR2_OIS1N)
+#define TIM_OCNIDLESTATE_RESET ((uint32_t)0x0000)
+#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIDLESTATE_SET) || \
+ ((STATE) == TIM_OCNIDLESTATE_RESET))
+/**
+ * @}
+ */
+
+
+
+/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity
+ * @{
+ */
+
+#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING
+#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING
+#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE
+
+#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPOLARITY_RISING) || \
+ ((POLARITY) == TIM_ICPOLARITY_FALLING) || \
+ ((POLARITY) == TIM_ICPOLARITY_BOTHEDGE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection
+ * @{
+ */
+
+#define TIM_ICSELECTION_DIRECTTI (TIM_CCMR1_CC1S_0) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC1, IC2, IC3 or IC4, respectively */
+#define TIM_ICSELECTION_INDIRECTTI (TIM_CCMR1_CC1S_1) /*!< TIM Input 1, 2, 3 or 4 is selected to be
+ connected to IC2, IC1, IC4 or IC3, respectively */
+#define TIM_ICSELECTION_TRC (TIM_CCMR1_CC1S) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */
+
+#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSELECTION_DIRECTTI) || \
+ ((SELECTION) == TIM_ICSELECTION_INDIRECTTI) || \
+ ((SELECTION) == TIM_ICSELECTION_TRC))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler
+ * @{
+ */
+
+#define TIM_ICPSC_DIV1 ((uint32_t)0x0000) /*!< Capture performed each time an edge is detected on the capture input */
+#define TIM_ICPSC_DIV2 (TIM_CCMR1_IC1PSC_0) /*!< Capture performed once every 2 events */
+#define TIM_ICPSC_DIV4 (TIM_CCMR1_IC1PSC_1) /*!< Capture performed once every 4 events */
+#define TIM_ICPSC_DIV8 (TIM_CCMR1_IC1PSC) /*!< Capture performed once every 8 events */
+
+#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \
+ ((PRESCALER) == TIM_ICPSC_DIV2) || \
+ ((PRESCALER) == TIM_ICPSC_DIV4) || \
+ ((PRESCALER) == TIM_ICPSC_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode
+ * @{
+ */
+
+#define TIM_OPMODE_SINGLE (TIM_CR1_OPM)
+#define TIM_OPMODE_REPETITIVE ((uint32_t)0x0000)
+#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMODE_SINGLE) || \
+ ((MODE) == TIM_OPMODE_REPETITIVE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Encoder_Mode TIM Encoder Mode
+ * @{
+ */
+#define TIM_ENCODERMODE_TI1 (TIM_SMCR_SMS_0)
+#define TIM_ENCODERMODE_TI2 (TIM_SMCR_SMS_1)
+#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0)
+#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_ENCODERMODE_TI1) || \
+ ((MODE) == TIM_ENCODERMODE_TI2) || \
+ ((MODE) == TIM_ENCODERMODE_TI12))
+/**
+ * @}
+ */
+/** @defgroup TIM_Interrupt_definition TIM interrupt Definition
+ * @{
+ */
+#define TIM_IT_UPDATE (TIM_DIER_UIE)
+#define TIM_IT_CC1 (TIM_DIER_CC1IE)
+#define TIM_IT_CC2 (TIM_DIER_CC2IE)
+#define TIM_IT_CC3 (TIM_DIER_CC3IE)
+#define TIM_IT_CC4 (TIM_DIER_CC4IE)
+#define TIM_IT_COM (TIM_DIER_COMIE)
+#define TIM_IT_TRIGGER (TIM_DIER_TIE)
+#define TIM_IT_BREAK (TIM_DIER_BIE)
+
+#define IS_TIM_IT(IT) ((((IT) & 0xFFFFFF00) == 0x00000000) && ((IT) != 0x00000000))
+
+#define IS_TIM_GET_IT(IT) (((IT) == TIM_IT_UPDATE) || \
+ ((IT) == TIM_IT_CC1) || \
+ ((IT) == TIM_IT_CC2) || \
+ ((IT) == TIM_IT_CC3) || \
+ ((IT) == TIM_IT_CC4) || \
+ ((IT) == TIM_IT_COM) || \
+ ((IT) == TIM_IT_TRIGGER) || \
+ ((IT) == TIM_IT_BREAK))
+/**
+ * @}
+ */
+#define TIM_COMMUTATION_TRGI (TIM_CR2_CCUS)
+#define TIM_COMMUTATION_SOFTWARE ((uint32_t)0x0000)
+
+/** @defgroup TIM_DMA_sources TIM DMA Sources
+ * @{
+ */
+
+#define TIM_DMA_UPDATE (TIM_DIER_UDE)
+#define TIM_DMA_CC1 (TIM_DIER_CC1DE)
+#define TIM_DMA_CC2 (TIM_DIER_CC2DE)
+#define TIM_DMA_CC3 (TIM_DIER_CC3DE)
+#define TIM_DMA_CC4 (TIM_DIER_CC4DE)
+#define TIM_DMA_COM (TIM_DIER_COMDE)
+#define TIM_DMA_TRIGGER (TIM_DIER_TDE)
+#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & 0xFFFF80FF) == 0x00000000) && ((SOURCE) != 0x00000000))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Flag_definition TIM Flag Definition
+ * @{
+ */
+
+#define TIM_FLAG_UPDATE (TIM_SR_UIF)
+#define TIM_FLAG_CC1 (TIM_SR_CC1IF)
+#define TIM_FLAG_CC2 (TIM_SR_CC2IF)
+#define TIM_FLAG_CC3 (TIM_SR_CC3IF)
+#define TIM_FLAG_CC4 (TIM_SR_CC4IF)
+#define TIM_FLAG_COM (TIM_SR_COMIF)
+#define TIM_FLAG_TRIGGER (TIM_SR_TIF)
+#define TIM_FLAG_BREAK (TIM_SR_BIF)
+#define TIM_FLAG_CC1OF (TIM_SR_CC1OF)
+#define TIM_FLAG_CC2OF (TIM_SR_CC2OF)
+#define TIM_FLAG_CC3OF (TIM_SR_CC3OF)
+#define TIM_FLAG_CC4OF (TIM_SR_CC4OF)
+
+#define IS_TIM_FLAG(FLAG) (((FLAG) == TIM_FLAG_UPDATE) || \
+ ((FLAG) == TIM_FLAG_CC1) || \
+ ((FLAG) == TIM_FLAG_CC2) || \
+ ((FLAG) == TIM_FLAG_CC3) || \
+ ((FLAG) == TIM_FLAG_CC4) || \
+ ((FLAG) == TIM_FLAG_COM) || \
+ ((FLAG) == TIM_FLAG_TRIGGER) || \
+ ((FLAG) == TIM_FLAG_BREAK) || \
+ ((FLAG) == TIM_FLAG_CC1OF) || \
+ ((FLAG) == TIM_FLAG_CC2OF) || \
+ ((FLAG) == TIM_FLAG_CC3OF) || \
+ ((FLAG) == TIM_FLAG_CC4OF))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Source TIM Clock Source
+ * @{
+ */
+#define TIM_CLOCKSOURCE_ETRMODE2 (TIM_SMCR_ETPS_1)
+#define TIM_CLOCKSOURCE_INTERNAL (TIM_SMCR_ETPS_0)
+#define TIM_CLOCKSOURCE_ITR0 ((uint32_t)0x0000)
+#define TIM_CLOCKSOURCE_ITR1 (TIM_SMCR_TS_0)
+#define TIM_CLOCKSOURCE_ITR2 (TIM_SMCR_TS_1)
+#define TIM_CLOCKSOURCE_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1)
+#define TIM_CLOCKSOURCE_TI1ED (TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_TI1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_TI2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2)
+#define TIM_CLOCKSOURCE_ETRMODE1 (TIM_SMCR_TS)
+
+#define IS_TIM_CLOCKSOURCE(CLOCK) (((CLOCK) == TIM_CLOCKSOURCE_INTERNAL) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR0) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR1) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ITR3) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI1ED) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI1) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_TI2) || \
+ ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE1))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Clock_Polarity TIM Clock Polarity
+ * @{
+ */
+#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */
+#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */
+#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */
+
+#define IS_TIM_CLOCKPOLARITY(POLARITY) (((POLARITY) == TIM_CLOCKPOLARITY_INVERTED) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_NONINVERTED) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_RISING) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_FALLING) || \
+ ((POLARITY) == TIM_CLOCKPOLARITY_BOTHEDGE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler
+ * @{
+ */
+#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */
+#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */
+#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */
+
+#define IS_TIM_CLOCKPRESCALER(PRESCALER) (((PRESCALER) == TIM_CLOCKPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_CLOCKPRESCALER_DIV8))
+/**
+ * @}
+ */
+/** @defgroup TIM_Clock_Filter TIM Clock Filter
+ * @{
+ */
+
+#define IS_TIM_CLOCKFILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity
+ * @{
+ */
+#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */
+#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */
+
+
+#define IS_TIM_CLEARINPUT_POLARITY(POLARITY) (((POLARITY) == TIM_CLEARINPUTPOLARITY_INVERTED) || \
+ ((POLARITY) == TIM_CLEARINPUTPOLARITY_NONINVERTED))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler
+ * @{
+ */
+#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */
+#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */
+#define IS_TIM_CLEARINPUT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_ClearInput_Filter TIM Clear Input Filter
+ * @{
+ */
+
+#define IS_TIM_CLEARINPUT_FILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM Off-state Selection for Run Mode
+ * @{
+ */
+#define TIM_OSSR_ENABLE (TIM_BDTR_OSSR)
+#define TIM_OSSR_DISABLE ((uint32_t)0x0000)
+
+#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSR_ENABLE) || \
+ ((STATE) == TIM_OSSR_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM Off-state Selection for Idle Mode
+ * @{
+ */
+#define TIM_OSSI_ENABLE (TIM_BDTR_OSSI)
+#define TIM_OSSI_DISABLE ((uint32_t)0x0000)
+
+#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSI_ENABLE) || \
+ ((STATE) == TIM_OSSI_DISABLE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Lock_level TIM Lock Configuration
+ * @{
+ */
+#define TIM_LOCKLEVEL_OFF ((uint32_t)0x0000)
+#define TIM_LOCKLEVEL_1 (TIM_BDTR_LOCK_0)
+#define TIM_LOCKLEVEL_2 (TIM_BDTR_LOCK_1)
+#define TIM_LOCKLEVEL_3 (TIM_BDTR_LOCK)
+
+#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLEVEL_OFF) || \
+ ((LEVEL) == TIM_LOCKLEVEL_1) || \
+ ((LEVEL) == TIM_LOCKLEVEL_2) || \
+ ((LEVEL) == TIM_LOCKLEVEL_3))
+/**
+ * @}
+ */
+/** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable
+ * @{
+ */
+#define TIM_BREAK_ENABLE (TIM_BDTR_BKE)
+#define TIM_BREAK_DISABLE ((uint32_t)0x0000)
+
+#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_BREAK_ENABLE) || \
+ ((STATE) == TIM_BREAK_DISABLE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Break_Polarity TIM Break Input Polarity
+ * @{
+ */
+#define TIM_BREAKPOLARITY_LOW ((uint32_t)0x0000)
+#define TIM_BREAKPOLARITY_HIGH (TIM_BDTR_BKP)
+
+#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BREAKPOLARITY_LOW) || \
+ ((POLARITY) == TIM_BREAKPOLARITY_HIGH))
+/**
+ * @}
+ */
+/** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable
+ * @{
+ */
+#define TIM_AUTOMATICOUTPUT_ENABLE (TIM_BDTR_AOE)
+#define TIM_AUTOMATICOUTPUT_DISABLE ((uint32_t)0x0000)
+
+#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AUTOMATICOUTPUT_ENABLE) || \
+ ((STATE) == TIM_AUTOMATICOUTPUT_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection
+ * @{
+ */
+#define TIM_TRGO_RESET ((uint32_t)0x0000)
+#define TIM_TRGO_ENABLE (TIM_CR2_MMS_0)
+#define TIM_TRGO_UPDATE (TIM_CR2_MMS_1)
+#define TIM_TRGO_OC1 ((TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+#define TIM_TRGO_OC1REF (TIM_CR2_MMS_2)
+#define TIM_TRGO_OC2REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_0))
+#define TIM_TRGO_OC3REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1))
+#define TIM_TRGO_OC4REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0))
+
+#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO_RESET) || \
+ ((SOURCE) == TIM_TRGO_ENABLE) || \
+ ((SOURCE) == TIM_TRGO_UPDATE) || \
+ ((SOURCE) == TIM_TRGO_OC1) || \
+ ((SOURCE) == TIM_TRGO_OC1REF) || \
+ ((SOURCE) == TIM_TRGO_OC2REF) || \
+ ((SOURCE) == TIM_TRGO_OC3REF) || \
+ ((SOURCE) == TIM_TRGO_OC4REF))
+
+
+/**
+ * @}
+ */
+/** @defgroup TIM_Master_Slave_Mode TIM Master/Slave Mode
+ * @{
+ */
+
+#define TIM_MASTERSLAVEMODE_ENABLE ((uint32_t)0x0080)
+#define TIM_MASTERSLAVEMODE_DISABLE ((uint32_t)0x0000)
+#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MASTERSLAVEMODE_ENABLE) || \
+ ((STATE) == TIM_MASTERSLAVEMODE_DISABLE))
+/**
+ * @}
+ */
+/** @defgroup TIM_Trigger_Selection TIM Trigger Selection
+ * @{
+ */
+
+#define TIM_TS_ITR0 ((uint32_t)0x0000)
+#define TIM_TS_ITR1 ((uint32_t)0x0010)
+#define TIM_TS_ITR2 ((uint32_t)0x0020)
+#define TIM_TS_ITR3 ((uint32_t)0x0030)
+#define TIM_TS_TI1F_ED ((uint32_t)0x0040)
+#define TIM_TS_TI1FP1 ((uint32_t)0x0050)
+#define TIM_TS_TI2FP2 ((uint32_t)0x0060)
+#define TIM_TS_ETRF ((uint32_t)0x0070)
+#define TIM_TS_NONE ((uint32_t)0xFFFF)
+#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3) || \
+ ((SELECTION) == TIM_TS_TI1F_ED) || \
+ ((SELECTION) == TIM_TS_TI1FP1) || \
+ ((SELECTION) == TIM_TS_TI2FP2) || \
+ ((SELECTION) == TIM_TS_ETRF))
+#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3))
+#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
+ ((SELECTION) == TIM_TS_ITR1) || \
+ ((SELECTION) == TIM_TS_ITR2) || \
+ ((SELECTION) == TIM_TS_ITR3) || \
+ ((SELECTION) == TIM_TS_NONE))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity
+ * @{
+ */
+#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */
+#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */
+
+#define IS_TIM_TRIGGERPOLARITY(POLARITY) (((POLARITY) == TIM_TRIGGERPOLARITY_INVERTED ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_NONINVERTED) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_RISING ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_FALLING ) || \
+ ((POLARITY) == TIM_TRIGGERPOLARITY_BOTHEDGE ))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler
+ * @{
+ */
+#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */
+#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */
+#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */
+#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */
+
+#define IS_TIM_TRIGGERPRESCALER(PRESCALER) (((PRESCALER) == TIM_TRIGGERPRESCALER_DIV1) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV2) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV4) || \
+ ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV8))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Trigger_Filter TIM Trigger Filter
+ * @{
+ */
+
+#define IS_TIM_TRIGGERFILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+ /** @defgroup TIM_TI1_Selection TIM TI1 Input Selection
+ * @{
+ */
+
+#define TIM_TI1SELECTION_CH1 ((uint32_t)0x0000)
+#define TIM_TI1SELECTION_XORCOMBINATION (TIM_CR2_TI1S)
+
+#define IS_TIM_TI1SELECTION(TI1SELECTION) (((TI1SELECTION) == TIM_TI1SELECTION_CH1) || \
+ ((TI1SELECTION) == TIM_TI1SELECTION_XORCOMBINATION))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length
+ * @{
+ */
+
+#define TIM_DMABurstLength_1Transfer (0x00000000)
+#define TIM_DMABurstLength_2Transfers (0x00000100)
+#define TIM_DMABurstLength_3Transfers (0x00000200)
+#define TIM_DMABurstLength_4Transfers (0x00000300)
+#define TIM_DMABurstLength_5Transfers (0x00000400)
+#define TIM_DMABurstLength_6Transfers (0x00000500)
+#define TIM_DMABurstLength_7Transfers (0x00000600)
+#define TIM_DMABurstLength_8Transfers (0x00000700)
+#define TIM_DMABurstLength_9Transfers (0x00000800)
+#define TIM_DMABurstLength_10Transfers (0x00000900)
+#define TIM_DMABurstLength_11Transfers (0x00000A00)
+#define TIM_DMABurstLength_12Transfers (0x00000B00)
+#define TIM_DMABurstLength_13Transfers (0x00000C00)
+#define TIM_DMABurstLength_14Transfers (0x00000D00)
+#define TIM_DMABurstLength_15Transfers (0x00000E00)
+#define TIM_DMABurstLength_16Transfers (0x00000F00)
+#define TIM_DMABurstLength_17Transfers (0x00001000)
+#define TIM_DMABurstLength_18Transfers (0x00001100)
+#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Transfer) || \
+ ((LENGTH) == TIM_DMABurstLength_2Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_3Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_4Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_5Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_6Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_7Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_8Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_9Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_10Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_11Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_12Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_13Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_14Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_15Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_16Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_17Transfers) || \
+ ((LENGTH) == TIM_DMABurstLength_18Transfers))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Input_Capture_Filer_Value TIM Input Capture Value
+ * @{
+ */
+
+#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup DMA_Handle_index TIM DMA Handle Index
+ * @{
+ */
+#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0) /*!< Index of the DMA handle used for Update DMA requests */
+#define TIM_DMA_ID_CC1 ((uint16_t) 0x1) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */
+#define TIM_DMA_ID_CC2 ((uint16_t) 0x2) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */
+#define TIM_DMA_ID_CC3 ((uint16_t) 0x3) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */
+#define TIM_DMA_ID_CC4 ((uint16_t) 0x4) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */
+#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x5) /*!< Index of the DMA handle used for Commutation DMA requests */
+#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x6) /*!< Index of the DMA handle used for Trigger DMA requests */
+/**
+ * @}
+ */
+
+/** @defgroup Channel_CC_State TIM Capture/Compare Channel State
+ * @{
+ */
+#define TIM_CCx_ENABLE ((uint32_t)0x0001)
+#define TIM_CCx_DISABLE ((uint32_t)0x0000)
+#define TIM_CCxN_ENABLE ((uint32_t)0x0004)
+#define TIM_CCxN_DISABLE ((uint32_t)0x0000)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup TIM_Exported_Macros TIM Exported Macros
+ * @{
+ */
+
+/** @brief Reset TIM handle state
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TIM_STATE_RESET)
+
+/**
+ * @brief Enable the TIM peripheral.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN))
+
+/**
+ * @brief Enable the TIM main Output.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE))
+
+/* The counter of a timer instance is disabled only if all the CCx and CCxN
+ channels have been disabled */
+#define CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E))
+#define CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE))
+
+/**
+ * @brief Disable the TIM peripheral.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & CCER_CCxE_MASK) == 0) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & CCER_CCxNE_MASK) == 0) \
+ { \
+ (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \
+ } \
+ } \
+ } while(0)
+/* The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN
+ channels have been disabled */
+/**
+ * @brief Disable the TIM main Output.
+ * @param __HANDLE__: TIM handle
+ * @retval None
+ */
+#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \
+ do { \
+ if (((__HANDLE__)->Instance->CCER & CCER_CCxE_MASK) == 0) \
+ { \
+ if(((__HANDLE__)->Instance->CCER & CCER_CCxNE_MASK) == 0) \
+ { \
+ (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \
+ } \
+ } \
+ } while(0)
+
+#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__))
+#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__))
+#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__))
+#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__))
+#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__))
+#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+#define __HAL_TIM_GET_ITSTATUS(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__))
+
+#define __HAL_TIM_DIRECTION_STATUS(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR))
+#define __HAL_TIM_PRESCALER (__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__))
+
+#define __HAL_TIM_SetICPrescalerValue(__HANDLE__, __CHANNEL__, __ICPSC__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\
+ ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8)))
+
+#define __HAL_TIM_ResetICPrescalerValue(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC2PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC3PSC) :\
+ ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC4PSC))
+
+/**
+ * @brief Sets the TIM Counter Register value on runtime.
+ * @param __HANDLE__: TIM handle.
+ * @param __COUNTER__: specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SetCounter(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__))
+
+/**
+ * @brief Gets the TIM Counter Register value on runtime.
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GetCounter(__HANDLE__) \
+ ((__HANDLE__)->Instance->CNT)
+
+/**
+ * @brief Sets the TIM Autoreload Register value on runtime without calling
+ * another time any Init function.
+ * @param __HANDLE__: TIM handle.
+ * @param __AUTORELOAD__: specifies the Counter register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SetAutoreload(__HANDLE__, __AUTORELOAD__) \
+ do{ \
+ (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \
+ (__HANDLE__)->Init.Period = (__AUTORELOAD__); \
+ } while(0)
+
+/**
+ * @brief Gets the TIM Autoreload Register value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GetAutoreload(__HANDLE__) \
+ ((__HANDLE__)->Instance->ARR)
+
+/**
+ * @brief Sets the TIM Clock Division value on runtime without calling
+ * another time any Init function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CKD__: specifies the clock division value.
+ * This parameter can be one of the following value:
+ * @arg TIM_CLOCKDIVISION_DIV1
+ * @arg TIM_CLOCKDIVISION_DIV2
+ * @arg TIM_CLOCKDIVISION_DIV4
+ * @retval None
+ */
+#define __HAL_TIM_SetClockDivision(__HANDLE__, __CKD__) \
+ do{ \
+ (__HANDLE__)->Instance->CR1 &= (uint16_t)(~TIM_CR1_CKD); \
+ (__HANDLE__)->Instance->CR1 |= (__CKD__); \
+ (__HANDLE__)->Init.ClockDivision = (__CKD__); \
+ } while(0)
+
+/**
+ * @brief Gets the TIM Clock Division value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @retval None
+ */
+#define __HAL_TIM_GetClockDivision(__HANDLE__) \
+ ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD)
+
+/**
+ * @brief Sets the TIM Input Capture prescaler on runtime without calling
+ * another time HAL_TIM_IC_ConfigChannel() function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __ICPSC__: specifies the Input Capture4 prescaler new value.
+ * This parameter can be one of the following values:
+ * @arg TIM_ICPSC_DIV1: no prescaler
+ * @arg TIM_ICPSC_DIV2: capture is done once every 2 events
+ * @arg TIM_ICPSC_DIV4: capture is done once every 4 events
+ * @arg TIM_ICPSC_DIV8: capture is done once every 8 events
+ * @retval None
+ */
+#define __HAL_TIM_SetICPrescaler(__HANDLE__, __CHANNEL__, __ICPSC__) \
+ do{ \
+ __HAL_TIM_ResetICPrescalerValue((__HANDLE__), (__CHANNEL__)); \
+ __HAL_TIM_SetICPrescalerValue((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \
+ } while(0)
+
+/**
+ * @brief Gets the TIM Input Capture prescaler on runtime
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get input capture 1 prescaler value
+ * @arg TIM_CHANNEL_2: get input capture 2 prescaler value
+ * @arg TIM_CHANNEL_3: get input capture 3 prescaler value
+ * @arg TIM_CHANNEL_4: get input capture 4 prescaler value
+ * @retval None
+ */
+#define __HAL_TIM_GetICPrescaler(__HANDLE__, __CHANNEL__) \
+ (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\
+ (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8)
+
+/**
+ * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register
+ * @param __HANDLE__: TIM handle.
+ * @note When the USR bit of the TIMx_CR1 register is set, only counter
+ * overflow/underflow generates an update interrupt or DMA request (if
+ * enabled)
+ * @retval None
+ */
+#define __HAL_TIM_URS_ENABLE(__HANDLE__) \
+ ((__HANDLE__)->Instance->CR1|= (TIM_CR1_URS))
+
+/**
+ * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register
+ * @param __HANDLE__: TIM handle.
+ * @note When the USR bit of the TIMx_CR1 register is reset, any of the
+ * following events generate an update interrupt or DMA request (if
+ * enabled):
+ * Counter overflow/underflow
+ * Setting the UG bit
+ * Update generation through the slave mode controller
+ * @retval None
+ */
+#define __HAL_TIM_URS_DISABLE(__HANDLE__) \
+ ((__HANDLE__)->Instance->CR1&=~(TIM_CR1_URS))
+
+/**
+ * @}
+ */
+
+/* Include TIM HAL Extended module */
+#include "stm32f3xx_hal_tim_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIM_Exported_Functions TIM Exported Functions
+ * @{
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group1 Time Base functions
+ * @brief Time Base functions
+ * @{
+ */
+/* Time Base functions ********************************************************/
+HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group2 Time Output Compare functions
+ * @brief Time Output Compare functions
+ * @{
+ */
+/* Timer Output Compare functions **********************************************/
+HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group3 Time PWM functions
+ * @brief Time PWM functions
+ * @{
+ */
+/* Timer PWM functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group4 Time Input Capture functions
+ * @brief Time Input Capture functions
+ * @{
+ */
+/* Timer Input Capture functions ***********************************************/
+HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group5 Time One Pulse functions
+ * @brief Time One Pulse functions
+ * @{
+ */
+/* Timer One Pulse functions ***************************************************/
+HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode);
+HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim);
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group6 Time Encoder functions
+ * @brief Time Encoder functions
+ * @{
+ */
+/* Timer Encoder functions *****************************************************/
+HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim);
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length);
+HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIM_Exported_Functions_Group7 TIM IRQ handler management
+ * @brief IRQ handler management
+ * @{
+ */
+/* Interrupt Handler functions **********************************************/
+void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group8 Peripheral Control functions
+ * @brief Peripheral Control functions
+ * @{
+ */
+/* Control functions *********************************************************/
+HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel);
+HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig);
+HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection);
+HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \
+ uint32_t *BurstBuffer, uint32_t BurstLength);
+HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc);
+HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource);
+uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions
+ * @brief TIM Callbacks functions
+ * @{
+ */
+/* Callback in non blocking modes (Interrupt and DMA) *************************/
+void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim);
+void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Exported_Functions_Group10 Peripheral State functions
+ * @brief Peripheral State functions
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim);
+HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure);
+void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter);
+void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
+void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler,
+ uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter);
+
+void HAL_TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma);
+void HAL_TIM_DMAError(DMA_HandleTypeDef *hdma);
+void HAL_TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma);
+void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_TIM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_tim_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1079 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_tim_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of TIM HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_TIM_EX_H
+#define __STM32F3xx_HAL_TIM_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TIMEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Types TIM Extended Exported Types
+ * @{
+ */
+
+/**
+ * @brief TIM Hall sensor Configuration Structure definition
+ */
+
+typedef struct
+{
+
+ uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal.
+ This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+
+ uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler.
+ This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+
+ uint32_t IC1Filter; /*!< Specifies the input capture filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+ uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register.
+ This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */
+} TIM_HallSensor_InitTypeDef;
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/**
+ * @brief TIM Master configuration Structure definition
+ * @note STM32F373xC and STM32F378xx: timer instances provide a single TRGO
+ * output
+ */
+typedef struct {
+ uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection
+ This parameter can be a value of @ref TIM_Master_Mode_Selection */
+ uint32_t MasterSlaveMode; /*!< Master/slave mode selection
+ This parameter can be a value of @ref TIM_Master_Slave_Mode */
+}TIM_MasterConfigTypeDef;
+
+/**
+ * @brief TIM Break and Dead time configuration Structure definition
+ * @note STM32F373xC and STM32F378xx: single break input with configurable polarity.
+ */
+typedef struct
+{
+ uint32_t OffStateRunMode; /*!< TIM off state in run mode
+ This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+ uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode
+ This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+ uint32_t LockLevel; /*!< TIM Lock level
+ This parameter can be a value of @ref TIM_Lock_level */
+ uint32_t DeadTime; /*!< TIM dead Time
+ This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+ uint32_t BreakState; /*!< TIM Break State
+ This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+ uint32_t BreakPolarity; /*!< TIM Break input polarity
+ This parameter can be a value of @ref TIM_Break_Polarity */
+ uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state
+ This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+} TIM_BreakDeadTimeConfigTypeDef;
+
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/**
+ * @brief TIM Break input(s) and Dead time configuration Structure definition
+ * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable
+ * filter and polarity.
+ */
+typedef struct
+{
+ uint32_t OffStateRunMode; /*!< TIM off state in run mode
+ This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+ uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode
+ This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+ uint32_t LockLevel; /*!< TIM Lock level
+ This parameter can be a value of @ref TIM_Lock_level */
+ uint32_t DeadTime; /*!< TIM dead Time
+ This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+ uint32_t BreakState; /*!< TIM Break State
+ This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+ uint32_t BreakPolarity; /*!< TIM Break input polarity
+ This parameter can be a value of @ref TIM_Break_Polarity */
+ uint32_t BreakFilter; /*!< Specifies the brek input filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+ uint32_t Break2State; /*!< TIM Break2 State
+ This parameter can be a value of @ref TIMEx_Break2_Input_enable_disable */
+ uint32_t Break2Polarity; /*!< TIM Break2 input polarity
+ This parameter can be a value of @ref TIMEx_Break2_Polarity */
+ uint32_t Break2Filter; /*!< TIM break2 input filter.
+ This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */
+ uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state
+ This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */
+} TIM_BreakDeadTimeConfigTypeDef;
+
+/**
+ * @brief TIM Master configuration Structure definition
+ * @note Advanced timers provide TRGO2 internal line which is redirected
+ * to the ADC
+ */
+typedef struct {
+ uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection
+ This parameter can be a value of @ref TIM_Master_Mode_Selection */
+ uint32_t MasterOutputTrigger2; /*!< Trigger output2 (TRGO2) selection
+ This parameter can be a value of @ref TIMEx_Master_Mode_Selection_2 */
+ uint32_t MasterSlaveMode; /*!< Master/slave mode selection
+ This parameter can be a value of @ref TIM_Master_Slave_Mode */
+}TIM_MasterConfigTypeDef;
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants
+ * @{
+ */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup TIMEx_Channel TIM Extended Channel
+ * @{
+ */
+#define TIM_CHANNEL_1 ((uint32_t)0x0000)
+#define TIM_CHANNEL_2 ((uint32_t)0x0004)
+#define TIM_CHANNEL_3 ((uint32_t)0x0008)
+#define TIM_CHANNEL_4 ((uint32_t)0x000C)
+#define TIM_CHANNEL_ALL ((uint32_t)0x0018)
+
+#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4) || \
+ ((CHANNEL) == TIM_CHANNEL_ALL))
+
+#define IS_TIM_PWMI_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Output_Compare_and_PWM_modes TIM Extended Output Compare and PWM Modes
+ * @{
+ */
+
+#define TIM_OCMODE_TIMING ((uint32_t)0x0000)
+#define TIM_OCMODE_ACTIVE ((uint32_t)TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_INACTIVE ((uint32_t)TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_TOGGLE ((uint32_t)TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_PWM1 ((uint32_t)TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_PWM2 ((uint32_t)TIM_CCMR1_OC1M)
+#define TIM_OCMODE_FORCED_ACTIVE ((uint32_t)TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_FORCED_INACTIVE ((uint32_t)TIM_CCMR1_OC1M_2)
+
+#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \
+ ((MODE) == TIM_OCMODE_PWM2))
+
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING) || \
+ ((MODE) == TIM_OCMODE_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_INACTIVE) || \
+ ((MODE) == TIM_OCMODE_TOGGLE) || \
+ ((MODE) == TIM_OCMODE_FORCED_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_FORCED_INACTIVE))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_ClearInput_Source TIM Extended Clear Input Source
+ * @{
+ */
+#define TIM_CLEARINPUTSOURCE_ETR ((uint32_t)0x0001)
+#define TIM_CLEARINPUTSOURCE_NONE ((uint32_t)0x0000)
+
+#define IS_TIM_CLEARINPUT_SOURCE(SOURCE) (((SOURCE) == TIM_CLEARINPUTSOURCE_NONE) || \
+ ((SOURCE) == TIM_CLEARINPUTSOURCE_ETR))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Slave_Mode TIM Extended Slave Mode
+ * @{
+ */
+
+#define TIM_SLAVEMODE_DISABLE ((uint32_t)0x0000)
+#define TIM_SLAVEMODE_RESET ((uint16_t)0x0004)
+#define TIM_SLAVEMODE_GATED ((uint16_t)0x0005)
+#define TIM_SLAVEMODE_TRIGGER ((uint16_t)0x0006)
+#define TIM_SLAVEMODE_EXTERNAL1 ((uint16_t)0x0007)
+
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \
+ ((MODE) == TIM_SLAVEMODE_RESET) || \
+ ((MODE) == TIM_SLAVEMODE_GATED) || \
+ ((MODE) == TIM_SLAVEMODE_TRIGGER) || \
+ ((MODE) == TIM_SLAVEMODE_EXTERNAL1))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Event_Source TIM Extended Event Source
+ * @{
+ */
+
+#define TIM_EventSource_Update TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */
+#define TIM_EventSource_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1 */
+#define TIM_EventSource_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2 */
+#define TIM_EventSource_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3 */
+#define TIM_EventSource_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4 */
+#define TIM_EventSource_COM TIM_EGR_COMG /*!< A commutation event is generated */
+#define TIM_EventSource_Trigger TIM_EGR_TG /*!< A trigger event is generated */
+#define TIM_EventSource_Break TIM_EGR_BG /*!< A break event is generated */
+#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & 0xFFFFFF00) == 0x00000000) && ((SOURCE) != 0x00000000))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_DMA_Base_address TIM Extended DMA BAse Address
+ * @{
+ */
+
+#define TIM_DMABase_CR1 (0x00000000)
+#define TIM_DMABase_CR2 (0x00000001)
+#define TIM_DMABase_SMCR (0x00000002)
+#define TIM_DMABase_DIER (0x00000003)
+#define TIM_DMABase_SR (0x00000004)
+#define TIM_DMABase_EGR (0x00000005)
+#define TIM_DMABase_CCMR1 (0x00000006)
+#define TIM_DMABase_CCMR2 (0x00000007)
+#define TIM_DMABase_CCER (0x00000008)
+#define TIM_DMABase_CNT (0x00000009)
+#define TIM_DMABase_PSC (0x0000000A)
+#define TIM_DMABase_ARR (0x0000000B)
+#define TIM_DMABase_RCR (0x0000000C)
+#define TIM_DMABase_CCR1 (0x0000000D)
+#define TIM_DMABase_CCR2 (0x0000000E)
+#define TIM_DMABase_CCR3 (0x0000000F)
+#define TIM_DMABase_CCR4 (0x00000010)
+#define TIM_DMABase_BDTR (0x00000011)
+#define TIM_DMABase_DCR (0x00000012)
+#define TIM_DMABase_OR (0x00000013)
+#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1) || \
+ ((BASE) == TIM_DMABase_CR2) || \
+ ((BASE) == TIM_DMABase_SMCR) || \
+ ((BASE) == TIM_DMABase_DIER) || \
+ ((BASE) == TIM_DMABase_SR) || \
+ ((BASE) == TIM_DMABase_EGR) || \
+ ((BASE) == TIM_DMABase_CCMR1) || \
+ ((BASE) == TIM_DMABase_CCMR2) || \
+ ((BASE) == TIM_DMABase_CCER) || \
+ ((BASE) == TIM_DMABase_CNT) || \
+ ((BASE) == TIM_DMABase_PSC) || \
+ ((BASE) == TIM_DMABase_ARR) || \
+ ((BASE) == TIM_DMABase_RCR) || \
+ ((BASE) == TIM_DMABase_CCR1) || \
+ ((BASE) == TIM_DMABase_CCR2) || \
+ ((BASE) == TIM_DMABase_CCR3) || \
+ ((BASE) == TIM_DMABase_CCR4) || \
+ ((BASE) == TIM_DMABase_BDTR) || \
+ ((BASE) == TIM_DMABase_DCR) || \
+ ((BASE) == TIM_DMABase_OR))
+/**
+ * @}
+ */
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/** @defgroup TIMEx_Channel TIM Extended Channel
+ * @{
+ */
+
+#define TIM_CHANNEL_1 ((uint32_t)0x0000)
+#define TIM_CHANNEL_2 ((uint32_t)0x0004)
+#define TIM_CHANNEL_3 ((uint32_t)0x0008)
+#define TIM_CHANNEL_4 ((uint32_t)0x000C)
+#define TIM_CHANNEL_5 ((uint32_t)0x0010)
+#define TIM_CHANNEL_6 ((uint32_t)0x0014)
+#define TIM_CHANNEL_ALL ((uint32_t)0x003C)
+
+#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3) || \
+ ((CHANNEL) == TIM_CHANNEL_4) || \
+ ((CHANNEL) == TIM_CHANNEL_5) || \
+ ((CHANNEL) == TIM_CHANNEL_6) || \
+ ((CHANNEL) == TIM_CHANNEL_ALL))
+
+#define IS_TIM_PWMI_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2))
+
+#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+ ((CHANNEL) == TIM_CHANNEL_2) || \
+ ((CHANNEL) == TIM_CHANNEL_3))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Output_Compare_and_PWM_modes TIM Extended Output Compare and PWM Modes
+ * @{
+ */
+#define TIM_OCMODE_TIMING ((uint32_t)0x0000)
+#define TIM_OCMODE_ACTIVE ((uint32_t)TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_INACTIVE ((uint32_t)TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_TOGGLE ((uint32_t)TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_PWM1 ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_PWM2 ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_FORCED_ACTIVE ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_FORCED_INACTIVE ((uint32_t)TIM_CCMR1_OC1M_2)
+
+#define TIM_OCMODE_RETRIGERRABLE_OPM1 ((uint32_t)TIM_CCMR1_OC1M_3)
+#define TIM_OCMODE_RETRIGERRABLE_OPM2 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_COMBINED_PWM1 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_COMBINED_PWM2 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_ASSYMETRIC_PWM1 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_ASSYMETRIC_PWM2 ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M)
+
+#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \
+ ((MODE) == TIM_OCMODE_PWM2) || \
+ ((MODE) == TIM_OCMODE_COMBINED_PWM1) || \
+ ((MODE) == TIM_OCMODE_COMBINED_PWM2) || \
+ ((MODE) == TIM_OCMODE_ASSYMETRIC_PWM1) || \
+ ((MODE) == TIM_OCMODE_ASSYMETRIC_PWM2))
+
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING) || \
+ ((MODE) == TIM_OCMODE_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_INACTIVE) || \
+ ((MODE) == TIM_OCMODE_TOGGLE) || \
+ ((MODE) == TIM_OCMODE_FORCED_ACTIVE) || \
+ ((MODE) == TIM_OCMODE_FORCED_INACTIVE) || \
+ ((MODE) == TIM_OCMODE_RETRIGERRABLE_OPM1) || \
+ ((MODE) == TIM_OCMODE_RETRIGERRABLE_OPM2))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_ClearInput_Source TIM Extended Clear Input Source
+ * @{
+ */
+#define TIM_CLEARINPUTSOURCE_ETR ((uint32_t)0x0001)
+#define TIM_CLEARINPUTSOURCE_OCREFCLR ((uint32_t)0x0002)
+#define TIM_CLEARINPUTSOURCE_NONE ((uint32_t)0x0000)
+
+#define IS_TIM_CLEARINPUT_SOURCE(MODE) (((MODE) == TIM_CLEARINPUTSOURCE_ETR) || \
+ ((MODE) == TIM_CLEARINPUTSOURCE_OCREFCLR) || \
+ ((MODE) == TIM_CLEARINPUTSOURCE_NONE))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_BreakInput_Filter TIM Extended Break Input Filter
+ * @{
+ */
+
+#define IS_TIM_BREAK_FILTER(BRKFILTER) ((BRKFILTER) <= 0xF)
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Break2_Input_enable_disable TIMEX Break input 2 Enable
+ * @{
+ */
+#define TIM_BREAK2_DISABLE ((uint32_t)0x00000000)
+#define TIM_BREAK2_ENABLE ((uint32_t)TIM_BDTR_BK2E)
+
+#define IS_TIM_BREAK2_STATE(STATE) (((STATE) == TIM_BREAK2_ENABLE) || \
+ ((STATE) == TIM_BREAK2_DISABLE))
+/**
+ * @}
+ */
+/** @defgroup TIMEx_Break2_Polarity TIM Extended Break Input 2 Polarity
+ * @{
+ */
+#define TIM_BREAK2POLARITY_LOW ((uint32_t)0x00000000)
+#define TIM_BREAK2POLARITY_HIGH ((uint32_t)TIM_BDTR_BK2P)
+
+#define IS_TIM_BREAK2_POLARITY(POLARITY) (((POLARITY) == TIM_BREAK2POLARITY_LOW) || \
+ ((POLARITY) == TIM_BREAK2POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Master_Mode_Selection_2 TIM Extended Master Mode Selection 2 (TRGO2)
+ * @{
+ */
+#define TIM_TRGO2_RESET ((uint32_t)0x00000000)
+#define TIM_TRGO2_ENABLE ((uint32_t)(TIM_CR2_MMS2_0))
+#define TIM_TRGO2_UPDATE ((uint32_t)(TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC1 ((uint32_t)(TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC1REF ((uint32_t)(TIM_CR2_MMS2_2))
+#define TIM_TRGO2_OC2REF ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC3REF ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC4REF ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC5REF ((uint32_t)(TIM_CR2_MMS2_3))
+#define TIM_TRGO2_OC6REF ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC4REF_RISINGFALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC6REF_RISINGFALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC4REF_RISING_OC6REF_RISING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2))
+#define TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0))
+#define TIM_TRGO2_OC5REF_RISING_OC6REF_RISING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 |TIM_CR2_MMS2_1))
+#define TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))
+
+#define IS_TIM_TRGO2_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO2_RESET) || \
+ ((SOURCE) == TIM_TRGO2_ENABLE) || \
+ ((SOURCE) == TIM_TRGO2_UPDATE) || \
+ ((SOURCE) == TIM_TRGO2_OC1) || \
+ ((SOURCE) == TIM_TRGO2_OC1REF) || \
+ ((SOURCE) == TIM_TRGO2_OC2REF) || \
+ ((SOURCE) == TIM_TRGO2_OC3REF) || \
+ ((SOURCE) == TIM_TRGO2_OC3REF) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF) || \
+ ((SOURCE) == TIM_TRGO2_OC5REF) || \
+ ((SOURCE) == TIM_TRGO2_OC6REF) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF_RISINGFALLING) || \
+ ((SOURCE) == TIM_TRGO2_OC6REF_RISINGFALLING) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF_RISING_OC6REF_RISING) || \
+ ((SOURCE) == TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING) || \
+ ((SOURCE) == TIM_TRGO2_OC5REF_RISING_OC6REF_RISING) || \
+ ((SOURCE) == TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Slave_Mode TIM Extended Slave mode
+ * @{
+ */
+#define TIM_SLAVEMODE_DISABLE ((uint32_t)0x0000)
+#define TIM_SLAVEMODE_RESET ((uint32_t)(TIM_SMCR_SMS_2))
+#define TIM_SLAVEMODE_GATED ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0))
+#define TIM_SLAVEMODE_TRIGGER ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1))
+#define TIM_SLAVEMODE_EXTERNAL1 ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0))
+#define TIM_SLAVEMODE_COMBINED_RESETTRIGGER ((uint32_t)(TIM_SMCR_SMS_3))
+
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \
+ ((MODE) == TIM_SLAVEMODE_RESET) || \
+ ((MODE) == TIM_SLAVEMODE_GATED) || \
+ ((MODE) == TIM_SLAVEMODE_TRIGGER) || \
+ ((MODE) == TIM_SLAVEMODE_EXTERNAL1) || \
+ ((MODE) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER))
+/**
+ * @}
+ */
+
+/** @defgroup TIM_Event_Source TIM Extended Event Source
+ * @{
+ */
+
+#define TIM_EventSource_Update TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */
+#define TIM_EventSource_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1 */
+#define TIM_EventSource_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2 */
+#define TIM_EventSource_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3 */
+#define TIM_EventSource_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4 */
+#define TIM_EventSource_COM TIM_EGR_COMG /*!< A commutation event is generated */
+#define TIM_EventSource_Trigger TIM_EGR_TG /*!< A trigger event is generated */
+#define TIM_EventSource_Break TIM_EGR_BG /*!< A break event is generated */
+#define TIM_EventSource_Break2 TIM_EGR_B2G /*!< A break 2 event is generated */
+#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & 0xFFFFFE00) == 0x00000000) && ((SOURCE) != 0x00000000))
+
+/**
+ * @}
+ */
+
+/** @defgroup TIM_DMA_Base_address TIM Extended DMA Base Address
+ * @{
+ */
+
+#define TIM_DMABase_CR1 (0x00000000)
+#define TIM_DMABase_CR2 (0x00000001)
+#define TIM_DMABase_SMCR (0x00000002)
+#define TIM_DMABase_DIER (0x00000003)
+#define TIM_DMABase_SR (0x00000004)
+#define TIM_DMABase_EGR (0x00000005)
+#define TIM_DMABase_CCMR1 (0x00000006)
+#define TIM_DMABase_CCMR2 (0x00000007)
+#define TIM_DMABase_CCER (0x00000008)
+#define TIM_DMABase_CNT (0x00000009)
+#define TIM_DMABase_PSC (0x0000000A)
+#define TIM_DMABase_ARR (0x0000000B)
+#define TIM_DMABase_RCR (0x0000000C)
+#define TIM_DMABase_CCR1 (0x0000000D)
+#define TIM_DMABase_CCR2 (0x0000000E)
+#define TIM_DMABase_CCR3 (0x0000000F)
+#define TIM_DMABase_CCR4 (0x00000010)
+#define TIM_DMABase_BDTR (0x00000011)
+#define TIM_DMABase_DCR (0x00000012)
+#define TIM_DMABase_CCMR3 (0x00000015)
+#define TIM_DMABase_CCR5 (0x00000016)
+#define TIM_DMABase_CCR6 (0x00000017)
+#define TIM_DMABase_OR (0x00000018)
+#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1) || \
+ ((BASE) == TIM_DMABase_CR2) || \
+ ((BASE) == TIM_DMABase_SMCR) || \
+ ((BASE) == TIM_DMABase_DIER) || \
+ ((BASE) == TIM_DMABase_SR) || \
+ ((BASE) == TIM_DMABase_EGR) || \
+ ((BASE) == TIM_DMABase_CCMR1) || \
+ ((BASE) == TIM_DMABase_CCMR2) || \
+ ((BASE) == TIM_DMABase_CCER) || \
+ ((BASE) == TIM_DMABase_CNT) || \
+ ((BASE) == TIM_DMABase_PSC) || \
+ ((BASE) == TIM_DMABase_ARR) || \
+ ((BASE) == TIM_DMABase_RCR) || \
+ ((BASE) == TIM_DMABase_CCR1) || \
+ ((BASE) == TIM_DMABase_CCR2) || \
+ ((BASE) == TIM_DMABase_CCR3) || \
+ ((BASE) == TIM_DMABase_CCR4) || \
+ ((BASE) == TIM_DMABase_BDTR) || \
+ ((BASE) == TIM_DMABase_CCMR3) || \
+ ((BASE) == TIM_DMABase_CCR5) || \
+ ((BASE) == TIM_DMABase_CCR6) || \
+ ((BASE) == TIM_DMABase_OR))
+/**
+ * @}
+ */
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F302xE) || \
+ defined(STM32F302xC) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/** @defgroup TIMEx_Remap TIM Extended Remapping
+ * @{
+ */
+#define TIM_TIM1_ADC1_NONE (0x00000000) /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC1_AWD1 (0x00000001) /* !< TIM1_ETR is connected to ADC1 AWD1 */
+#define TIM_TIM1_ADC1_AWD2 (0x00000002) /* !< TIM1_ETR is connected to ADC1 AWD2 */
+#define TIM_TIM1_ADC1_AWD3 (0x00000003) /* !< TIM1_ETR is connected to ADC1 AWD3 */
+#define TIM_TIM16_GPIO (0x00000000) /* !< TIM16 TI1 is connected to GPIO */
+#define TIM_TIM16_RTC (0x00000001) /* !< TIM16 TI1 is connected to RTC_clock */
+#define TIM_TIM16_HSE (0x00000002) /* !< TIM16 TI1 is connected to HSE/32 */
+#define TIM_TIM16_MCO (0x00000003) /* !< TIM16 TI1 is connected to MCO */
+
+#define IS_TIM_REMAP(REMAP) (((REMAP) == TIM_TIM1_ADC1_NONE) ||\
+ ((REMAP) == TIM_TIM1_ADC1_AWD1) ||\
+ ((REMAP) == TIM_TIM1_ADC1_AWD2) ||\
+ ((REMAP) == TIM_TIM1_ADC1_AWD3) ||\
+ ((REMAP) == TIM_TIM16_GPIO) ||\
+ ((REMAP) == TIM_TIM16_RTC) ||\
+ ((REMAP) == TIM_TIM16_HSE) ||\
+ ((REMAP) == TIM_TIM16_MCO))
+/**
+ * @}
+ */
+#endif /* STM32F302xE || */
+ /* STM32F302xC || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+
+#if defined(STM32F303xC) || defined(STM32F358xx)
+/** @defgroup TIMEx_Remap TIM Extended Remapping 1
+ * @{
+ */
+#define TIM_TIM1_ADC1_NONE (0x00000000) /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC1_AWD1 (0x00000001) /* !< TIM1_ETR is connected to ADC1 AWD1 */
+#define TIM_TIM1_ADC1_AWD2 (0x00000002) /* !< TIM1_ETR is connected to ADC1 AWD2 */
+#define TIM_TIM1_ADC1_AWD3 (0x00000003) /* !< TIM1_ETR is connected to ADC1 AWD3 */
+#define TIM_TIM8_ADC2_NONE (0x00000000) /* !< TIM8_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM8_ADC2_AWD1 (0x00000001) /* !< TIM8_ETR is connected to ADC2 AWD1 */
+#define TIM_TIM8_ADC2_AWD2 (0x00000002) /* !< TIM8_ETR is connected to ADC2 AWD2 */
+#define TIM_TIM8_ADC2_AWD3 (0x00000003) /* !< TIM8_ETR is connected to ADC2 AWD3 */
+#define TIM_TIM16_GPIO (0x00000000) /* !< TIM16 TI1 is connected to GPIO */
+#define TIM_TIM16_RTC (0x00000001) /* !< TIM16 TI1 is connected to RTC_clock */
+#define TIM_TIM16_HSE (0x00000002) /* !< TIM16 TI1 is connected to HSE/32 */
+#define TIM_TIM16_MCO (0x00000003) /* !< TIM16 TI1 is connected to MCO */
+
+#define IS_TIM_REMAP(REMAP1) (((REMAP1) == TIM_TIM1_ADC1_NONE) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD1) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD2) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD3) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_NONE) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_AWD1) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_AWD2) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_AWD3) ||\
+ ((REMAP1) == TIM_TIM16_GPIO) ||\
+ ((REMAP1) == TIM_TIM16_RTC) ||\
+ ((REMAP1) == TIM_TIM16_HSE) ||\
+ ((REMAP1) == TIM_TIM16_MCO))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Remap2 TIM Extended Remapping 2
+ * @{
+ */
+#define TIM_TIM1_ADC4_NONE (0x00000000) /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC4_AWD1 (0x00000004) /* !< TIM1_ETR is connected to ADC4 AWD1 */
+#define TIM_TIM1_ADC4_AWD2 (0x00000008) /* !< TIM1_ETR is connected to ADC4 AWD2 */
+#define TIM_TIM1_ADC4_AWD3 (0x0000000C) /* !< TIM1_ETR is connected to ADC4 AWD3 */
+#define TIM_TIM8_ADC3_NONE (0x00000000) /* !< TIM8_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM8_ADC3_AWD1 (0x00000004) /* !< TIM8_ETR is connected to ADC3 AWD1 */
+#define TIM_TIM8_ADC3_AWD2 (0x00000008) /* !< TIM8_ETR is connected to ADC3 AWD2 */
+#define TIM_TIM8_ADC3_AWD3 (0x0000000C) /* !< TIM8_ETR is connected to ADC3 AWD3 */
+#define TIM_TIM16_NONE (0x00000000) /* !< Non significant value for TIM16 */
+
+#define IS_TIM_REMAP2(REMAP2) (((REMAP2) == TIM_TIM1_ADC4_NONE) ||\
+ ((REMAP2) == TIM_TIM1_ADC4_AWD1) ||\
+ ((REMAP2) == TIM_TIM1_ADC4_AWD2) ||\
+ ((REMAP2) == TIM_TIM1_ADC4_AWD3) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_NONE) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_AWD1) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_AWD2) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_AWD3) ||\
+ ((REMAP2) == TIM_TIM16_NONE))
+/**
+ * @}
+ */
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F303xE) || defined(STM32F398xx)
+/** @defgroup TIMEx_Remap TIM Extended Remapping 1
+ * @{
+ */
+#define TIM_TIM1_ADC1_NONE (0x00000000) /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC1_AWD1 (0x00000001) /* !< TIM1_ETR is connected to ADC1 AWD1 */
+#define TIM_TIM1_ADC1_AWD2 (0x00000002) /* !< TIM1_ETR is connected to ADC1 AWD2 */
+#define TIM_TIM1_ADC1_AWD3 (0x00000003) /* !< TIM1_ETR is connected to ADC1 AWD3 */
+#define TIM_TIM8_ADC2_NONE (0x00000000) /* !< TIM8_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM8_ADC2_AWD1 (0x00000001) /* !< TIM8_ETR is connected to ADC2 AWD1 */
+#define TIM_TIM8_ADC2_AWD2 (0x00000002) /* !< TIM8_ETR is connected to ADC2 AWD2 */
+#define TIM_TIM8_ADC2_AWD3 (0x00000003) /* !< TIM8_ETR is connected to ADC2 AWD3 */
+#define TIM_TIM16_GPIO (0x00000000) /* !< TIM16 TI1 is connected to GPIO */
+#define TIM_TIM16_RTC (0x00000001) /* !< TIM16 TI1 is connected to RTC_clock */
+#define TIM_TIM16_HSE (0x00000002) /* !< TIM16 TI1 is connected to HSE/32 */
+#define TIM_TIM16_MCO (0x00000003) /* !< TIM16 TI1 is connected to MCO */
+#define TIM_TIM20_ADC3_NONE (0x00000000) /* !< TIM20_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM20_ADC3_AWD1 (0x00000001) /* !< TIM20_ETR is connected to ADC3 AWD1 */
+#define TIM_TIM20_ADC3_AWD2 (0x00000002) /* !< TIM20_ETR is connected to ADC3 AWD2 */
+#define TIM_TIM20_ADC3_AWD3 (0x00000003) /* !< TIM20_ETR is connected to ADC3 AWD3 */
+
+#define IS_TIM_REMAP(REMAP1) (((REMAP1) == TIM_TIM1_ADC1_NONE) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD1) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD2) ||\
+ ((REMAP1) == TIM_TIM1_ADC1_AWD3) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_NONE) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_AWD1) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_AWD2) ||\
+ ((REMAP1) == TIM_TIM8_ADC2_AWD3) ||\
+ ((REMAP1) == TIM_TIM16_GPIO) ||\
+ ((REMAP1) == TIM_TIM16_RTC) ||\
+ ((REMAP1) == TIM_TIM16_HSE) ||\
+ ((REMAP1) == TIM_TIM16_MCO) ||\
+ ((REMAP1) == TIM_TIM20_ADC3_NONE) ||\
+ ((REMAP1) == TIM_TIM20_ADC3_AWD1) ||\
+ ((REMAP1) == TIM_TIM20_ADC3_AWD2) ||\
+ ((REMAP1) == TIM_TIM20_ADC3_AWD3))
+/**
+ * @}
+ */
+
+/** @defgroup TIMEx_Remap2 TIM Extended Remapping 2
+ * @{
+ */
+#define TIM_TIM1_ADC4_NONE (0x00000000) /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC4_AWD1 (0x00000004) /* !< TIM1_ETR is connected to ADC4 AWD1 */
+#define TIM_TIM1_ADC4_AWD2 (0x00000008) /* !< TIM1_ETR is connected to ADC4 AWD2 */
+#define TIM_TIM1_ADC4_AWD3 (0x0000000C) /* !< TIM1_ETR is connected to ADC4 AWD3 */
+#define TIM_TIM8_ADC3_NONE (0x00000000) /* !< TIM8_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM8_ADC3_AWD1 (0x00000004) /* !< TIM8_ETR is connected to ADC3 AWD1 */
+#define TIM_TIM8_ADC3_AWD2 (0x00000008) /* !< TIM8_ETR is connected to ADC3 AWD2 */
+#define TIM_TIM8_ADC3_AWD3 (0x0000000C) /* !< TIM8_ETR is connected to ADC3 AWD3 */
+#define TIM_TIM16_NONE (0x00000000) /* !< Non significant value for TIM16 */
+#define TIM_TIM20_ADC4_NONE (0x00000000) /* !< TIM20_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM20_ADC4_AWD1 (0x00000004) /* !< TIM20_ETR is connected to ADC4 AWD1 */
+#define TIM_TIM20_ADC4_AWD2 (0x00000008) /* !< TIM20_ETR is connected to ADC4 AWD2 */
+#define TIM_TIM20_ADC4_AWD3 (0x0000000C) /* !< TIM20_ETR is connected to ADC4 AWD3 */
+
+#define IS_TIM_REMAP2(REMAP2) (((REMAP2) == TIM_TIM1_ADC4_NONE) ||\
+ ((REMAP2) == TIM_TIM1_ADC4_AWD1) ||\
+ ((REMAP2) == TIM_TIM1_ADC4_AWD2) ||\
+ ((REMAP2) == TIM_TIM1_ADC4_AWD3) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_NONE) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_AWD1) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_AWD2) ||\
+ ((REMAP2) == TIM_TIM8_ADC3_AWD3) ||\
+ ((REMAP2) == TIM_TIM16_NONE) ||\
+ ((REMAP2) == TIM_TIM20_ADC4_NONE) ||\
+ ((REMAP2) == TIM_TIM20_ADC4_AWD1) ||\
+ ((REMAP2) == TIM_TIM20_ADC4_AWD2) ||\
+ ((REMAP2) == TIM_TIM20_ADC4_AWD3))
+/**
+ * @}
+ */
+#endif /* STM32F303xE || STM32F398xx */
+
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup TIMEx_Remap TIM Extended remapping
+ * @{
+ */
+
+#define TIM_TIM2_TIM8_TRGO (0x00000000) /*!< TIM8 TRGOUT is connected to TIM2_ITR1 */
+#define TIM_TIM2_ETH_PTP (0x00000400) /*!< PTP trigger output is connected to TIM2_ITR1 */
+#define TIM_TIM2_USBFS_SOF (0x00000800) /*!< OTG FS SOF is connected to the TIM2_ITR1 input */
+#define TIM_TIM2_USBHS_SOF (0x00000C00) /*!< OTG HS SOF is connected to the TIM2_ITR1 input */
+#define TIM_TIM14_GPIO (0x00000000) /* !< TIM14 TI1 is connected to GPIO */
+#define TIM_TIM14_RTC (0x00000001) /* !< TIM14 TI1 is connected to RTC_clock */
+#define TIM_TIM14_HSE (0x00000002) /* !< TIM14 TI1 is connected to HSE/32 */
+#define TIM_TIM14_MCO (0x00000003) /* !< TIM14 TI1 is connected to MCO */
+
+#define IS_TIM_REMAP(REMAP) (((REMAP) == TIM_TIM2_TIM8_TRGO) ||\
+ ((REMAP) == TIM_TIM2_ETH_PTP) ||\
+ ((REMAP) == TIM_TIM2_USBFS_SOF) ||\
+ ((REMAP) == TIM_TIM2_USBHS_SOF) ||\
+ ((REMAP) == TIM_TIM14_GPIO) ||\
+ ((REMAP) == TIM_TIM14_RTC) ||\
+ ((REMAP) == TIM_TIM14_HSE) ||\
+ ((REMAP) == TIM_TIM14_MCO))
+
+/**
+ * @}
+ */
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/** @defgroup TIMEx_Group_Channel5 Group Channel 5 and Channel 1, 2 or 3
+ * @{
+ */
+#define TIM_GROUPCH5_NONE (uint32_t)0x00000000 /* !< No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC */
+#define TIM_GROUPCH5_OC1REFC (TIM_CCR5_GC5C1) /* !< OC1REFC is the logical AND of OC1REFC and OC5REF */
+#define TIM_GROUPCH5_OC2REFC (TIM_CCR5_GC5C2) /* !< OC2REFC is the logical AND of OC2REFC and OC5REF */
+#define TIM_GROUPCH5_OC3REFC (TIM_CCR5_GC5C3) /* !< OC3REFC is the logical AND of OC3REFC and OC5REF */
+
+#define IS_TIM_GROUPCH5(OCREF) ((((OCREF) & 0x1FFFFFFF) == 0x00000000))
+/**
+ * @}
+ */
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+/** @defgroup TIM_Clock_Filter TIM Clock Filter
+ * @{
+ */
+#define IS_TIM_DEADTIME(DEADTIME) ((DEADTIME) <= 0xFF)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros
+ * @{
+ */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/**
+ * @brief Sets the TIM Capture Compare Register value on runtime without
+ * calling another time ConfigChannel function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @param __COMPARE__: specifies the Capture Compare register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SetCompare(__HANDLE__, __CHANNEL__, __COMPARE__) \
+(*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2)) = (__COMPARE__))
+
+/**
+ * @brief Gets the TIM Capture Compare Register value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channel associated with the capture compare register
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get capture/compare 1 register value
+ * @arg TIM_CHANNEL_2: get capture/compare 2 register value
+ * @arg TIM_CHANNEL_3: get capture/compare 3 register value
+ * @arg TIM_CHANNEL_4: get capture/compare 4 register value
+ * @retval None
+ */
+#define __HAL_TIM_GetCompare(__HANDLE__, __CHANNEL__) \
+ (*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2)))
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/**
+ * @brief Sets the TIM Capture Compare Register value on runtime without
+ * calling another time ConfigChannel function.
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channels to be configured.
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: TIM Channel 1 selected
+ * @arg TIM_CHANNEL_2: TIM Channel 2 selected
+ * @arg TIM_CHANNEL_3: TIM Channel 3 selected
+ * @arg TIM_CHANNEL_4: TIM Channel 4 selected
+ * @arg TIM_CHANNEL_5: TIM Channel 5 selected
+ * @arg TIM_CHANNEL_6: TIM Channel 6 selected
+ * @param __COMPARE__: specifies the Capture Compare register new value.
+ * @retval None
+ */
+#define __HAL_TIM_SetCompare(__HANDLE__, __CHANNEL__, __COMPARE__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5 = (__COMPARE__)) :\
+ ((__HANDLE__)->Instance->CCR6 |= (__COMPARE__)))
+
+/**
+ * @brief Gets the TIM Capture Compare Register value on runtime
+ * @param __HANDLE__: TIM handle.
+ * @param __CHANNEL__ : TIM Channel associated with the capture compare register
+ * This parameter can be one of the following values:
+ * @arg TIM_CHANNEL_1: get capture/compare 1 register value
+ * @arg TIM_CHANNEL_2: get capture/compare 2 register value
+ * @arg TIM_CHANNEL_3: get capture/compare 3 register value
+ * @arg TIM_CHANNEL_4: get capture/compare 4 register value
+ * @arg TIM_CHANNEL_5: get capture/compare 5 register value
+ * @arg TIM_CHANNEL_6: get capture/compare 6 register value
+ * @retval None
+ */
+#define __HAL_TIM_GetCompare(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5) :\
+ ((__HANDLE__)->Instance->CCR6))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions
+ * @{
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions
+ * @brief Timer Hall Sensor functions
+ * @{
+ */
+/* Timer Hall Sensor functions **********************************************/
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);
+
+void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);
+
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions
+ * @brief Timer Complementary Output Compare functions
+ * @{
+ */
+/* Timer Complementary Output Compare functions *****************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions
+ * @brief Timer Complementary PWM functions
+ * @{
+ */
+/* Timer Complementary PWM functions ****************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions
+ * @brief Timer Complementary One Pulse functions
+ * @{
+ */
+/* Timer Complementary One Pulse functions **********************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions
+ * @brief Peripheral Control functions
+ * @{
+ */
+/* Extended Control functions ************************************************/
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig);
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
+
+#if defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303xC) || defined(STM32F358xx)
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap1, uint32_t Remap2);
+#endif /* STM32F303xE || STM32F398xx || */
+ /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F302xE) || \
+ defined(STM32F302xC) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+ defined(STM32F373xC) || defined(STM32F378xx)
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
+#endif /* STM32F302xE || */
+ /* STM32F302xC || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+ /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels);
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions
+ * @brief Extended Callbacks functions
+ * @{
+ */
+/* Extended Callback *********************************************************/
+void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
+/**
+ * @}
+ */
+
+/** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions
+ * @brief Extended Peripheral State functions
+ * @{
+ */
+/* Extended Peripheral State functions **************************************/
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_TIM_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_tsc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,633 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_tsc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief This file contains all the functions prototypes for the TSC firmware
+ * library.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_TSC_H
+#define __STM32F3xx_TSC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup TSC
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup TSC_Exported_Types TSC Exported Types
+ * @{
+ */
+/**
+ * @brief TSC state structure definition
+ */
+typedef enum
+{
+ HAL_TSC_STATE_RESET = 0x00, /*!< TSC registers have their reset value */
+ HAL_TSC_STATE_READY = 0x01, /*!< TSC registers are initialized or acquisition is completed with success */
+ HAL_TSC_STATE_BUSY = 0x02, /*!< TSC initialization or acquisition is on-going */
+ HAL_TSC_STATE_ERROR = 0x03 /*!< Acquisition is completed with max count error */
+} HAL_TSC_StateTypeDef;
+
+/**
+ * @brief TSC group status structure definition
+ */
+typedef enum
+{
+ TSC_GROUP_ONGOING = 0x00, /*!< Acquisition on group is on-going or not started */
+ TSC_GROUP_COMPLETED = 0x01 /*!< Acquisition on group is completed with success (no max count error) */
+} TSC_GroupStatusTypeDef;
+
+/**
+ * @brief TSC init structure definition
+ */
+typedef struct
+{
+ uint32_t CTPulseHighLength; /*!< Charge-transfer high pulse length */
+ uint32_t CTPulseLowLength; /*!< Charge-transfer low pulse length */
+ uint32_t SpreadSpectrum; /*!< Spread spectrum activation */
+ uint32_t SpreadSpectrumDeviation; /*!< Spread spectrum deviation */
+ uint32_t SpreadSpectrumPrescaler; /*!< Spread spectrum prescaler */
+ uint32_t PulseGeneratorPrescaler; /*!< Pulse generator prescaler */
+ uint32_t MaxCountValue; /*!< Max count value */
+ uint32_t IODefaultMode; /*!< IO default mode */
+ uint32_t SynchroPinPolarity; /*!< Synchro pin polarity */
+ uint32_t AcquisitionMode; /*!< Acquisition mode */
+ uint32_t MaxCountInterrupt; /*!< Max count interrupt activation */
+ uint32_t ChannelIOs; /*!< Channel IOs mask */
+ uint32_t ShieldIOs; /*!< Shield IOs mask */
+ uint32_t SamplingIOs; /*!< Sampling IOs mask */
+} TSC_InitTypeDef;
+
+/**
+ * @brief TSC IOs configuration structure definition
+ */
+typedef struct
+{
+ uint32_t ChannelIOs; /*!< Channel IOs mask */
+ uint32_t ShieldIOs; /*!< Shield IOs mask */
+ uint32_t SamplingIOs; /*!< Sampling IOs mask */
+} TSC_IOConfigTypeDef;
+
+/**
+ * @brief TSC handle Structure definition
+ */
+typedef struct
+{
+ TSC_TypeDef *Instance; /*!< Register base address */
+ TSC_InitTypeDef Init; /*!< Initialization parameters */
+ __IO HAL_TSC_StateTypeDef State; /*!< Peripheral state */
+ HAL_LockTypeDef Lock; /*!< Lock feature */
+} TSC_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup TSC_Exported_Constants TSC Exported Constants
+ * @{
+ */
+
+#define TSC_CTPH_1CYCLE ((uint32_t)((uint32_t) 0 << 28))
+#define TSC_CTPH_2CYCLES ((uint32_t)((uint32_t) 1 << 28))
+#define TSC_CTPH_3CYCLES ((uint32_t)((uint32_t) 2 << 28))
+#define TSC_CTPH_4CYCLES ((uint32_t)((uint32_t) 3 << 28))
+#define TSC_CTPH_5CYCLES ((uint32_t)((uint32_t) 4 << 28))
+#define TSC_CTPH_6CYCLES ((uint32_t)((uint32_t) 5 << 28))
+#define TSC_CTPH_7CYCLES ((uint32_t)((uint32_t) 6 << 28))
+#define TSC_CTPH_8CYCLES ((uint32_t)((uint32_t) 7 << 28))
+#define TSC_CTPH_9CYCLES ((uint32_t)((uint32_t) 8 << 28))
+#define TSC_CTPH_10CYCLES ((uint32_t)((uint32_t) 9 << 28))
+#define TSC_CTPH_11CYCLES ((uint32_t)((uint32_t)10 << 28))
+#define TSC_CTPH_12CYCLES ((uint32_t)((uint32_t)11 << 28))
+#define TSC_CTPH_13CYCLES ((uint32_t)((uint32_t)12 << 28))
+#define TSC_CTPH_14CYCLES ((uint32_t)((uint32_t)13 << 28))
+#define TSC_CTPH_15CYCLES ((uint32_t)((uint32_t)14 << 28))
+#define TSC_CTPH_16CYCLES ((uint32_t)((uint32_t)15 << 28))
+#define IS_TSC_CTPH(VAL) (((VAL) == TSC_CTPH_1CYCLE) || \
+ ((VAL) == TSC_CTPH_2CYCLES) || \
+ ((VAL) == TSC_CTPH_3CYCLES) || \
+ ((VAL) == TSC_CTPH_4CYCLES) || \
+ ((VAL) == TSC_CTPH_5CYCLES) || \
+ ((VAL) == TSC_CTPH_6CYCLES) || \
+ ((VAL) == TSC_CTPH_7CYCLES) || \
+ ((VAL) == TSC_CTPH_8CYCLES) || \
+ ((VAL) == TSC_CTPH_9CYCLES) || \
+ ((VAL) == TSC_CTPH_10CYCLES) || \
+ ((VAL) == TSC_CTPH_11CYCLES) || \
+ ((VAL) == TSC_CTPH_12CYCLES) || \
+ ((VAL) == TSC_CTPH_13CYCLES) || \
+ ((VAL) == TSC_CTPH_14CYCLES) || \
+ ((VAL) == TSC_CTPH_15CYCLES) || \
+ ((VAL) == TSC_CTPH_16CYCLES))
+
+#define TSC_CTPL_1CYCLE ((uint32_t)((uint32_t) 0 << 24))
+#define TSC_CTPL_2CYCLES ((uint32_t)((uint32_t) 1 << 24))
+#define TSC_CTPL_3CYCLES ((uint32_t)((uint32_t) 2 << 24))
+#define TSC_CTPL_4CYCLES ((uint32_t)((uint32_t) 3 << 24))
+#define TSC_CTPL_5CYCLES ((uint32_t)((uint32_t) 4 << 24))
+#define TSC_CTPL_6CYCLES ((uint32_t)((uint32_t) 5 << 24))
+#define TSC_CTPL_7CYCLES ((uint32_t)((uint32_t) 6 << 24))
+#define TSC_CTPL_8CYCLES ((uint32_t)((uint32_t) 7 << 24))
+#define TSC_CTPL_9CYCLES ((uint32_t)((uint32_t) 8 << 24))
+#define TSC_CTPL_10CYCLES ((uint32_t)((uint32_t) 9 << 24))
+#define TSC_CTPL_11CYCLES ((uint32_t)((uint32_t)10 << 24))
+#define TSC_CTPL_12CYCLES ((uint32_t)((uint32_t)11 << 24))
+#define TSC_CTPL_13CYCLES ((uint32_t)((uint32_t)12 << 24))
+#define TSC_CTPL_14CYCLES ((uint32_t)((uint32_t)13 << 24))
+#define TSC_CTPL_15CYCLES ((uint32_t)((uint32_t)14 << 24))
+#define TSC_CTPL_16CYCLES ((uint32_t)((uint32_t)15 << 24))
+#define IS_TSC_CTPL(VAL) (((VAL) == TSC_CTPL_1CYCLE) || \
+ ((VAL) == TSC_CTPL_2CYCLES) || \
+ ((VAL) == TSC_CTPL_3CYCLES) || \
+ ((VAL) == TSC_CTPL_4CYCLES) || \
+ ((VAL) == TSC_CTPL_5CYCLES) || \
+ ((VAL) == TSC_CTPL_6CYCLES) || \
+ ((VAL) == TSC_CTPL_7CYCLES) || \
+ ((VAL) == TSC_CTPL_8CYCLES) || \
+ ((VAL) == TSC_CTPL_9CYCLES) || \
+ ((VAL) == TSC_CTPL_10CYCLES) || \
+ ((VAL) == TSC_CTPL_11CYCLES) || \
+ ((VAL) == TSC_CTPL_12CYCLES) || \
+ ((VAL) == TSC_CTPL_13CYCLES) || \
+ ((VAL) == TSC_CTPL_14CYCLES) || \
+ ((VAL) == TSC_CTPL_15CYCLES) || \
+ ((VAL) == TSC_CTPL_16CYCLES))
+
+#define IS_TSC_SS(VAL) (((VAL) == DISABLE) || ((VAL) == ENABLE))
+
+#define IS_TSC_SSD(VAL) (((VAL) == 0) || (((VAL) > 0) && ((VAL) < 128)))
+
+#define TSC_SS_PRESC_DIV1 ((uint32_t)0)
+#define TSC_SS_PRESC_DIV2 (TSC_CR_SSPSC)
+#define IS_TSC_SS_PRESC(VAL) (((VAL) == TSC_SS_PRESC_DIV1) || ((VAL) == TSC_SS_PRESC_DIV2))
+
+#define TSC_PG_PRESC_DIV1 ((uint32_t)(0 << 12))
+#define TSC_PG_PRESC_DIV2 ((uint32_t)(1 << 12))
+#define TSC_PG_PRESC_DIV4 ((uint32_t)(2 << 12))
+#define TSC_PG_PRESC_DIV8 ((uint32_t)(3 << 12))
+#define TSC_PG_PRESC_DIV16 ((uint32_t)(4 << 12))
+#define TSC_PG_PRESC_DIV32 ((uint32_t)(5 << 12))
+#define TSC_PG_PRESC_DIV64 ((uint32_t)(6 << 12))
+#define TSC_PG_PRESC_DIV128 ((uint32_t)(7 << 12))
+#define IS_TSC_PG_PRESC(VAL) (((VAL) == TSC_PG_PRESC_DIV1) || \
+ ((VAL) == TSC_PG_PRESC_DIV2) || \
+ ((VAL) == TSC_PG_PRESC_DIV4) || \
+ ((VAL) == TSC_PG_PRESC_DIV8) || \
+ ((VAL) == TSC_PG_PRESC_DIV16) || \
+ ((VAL) == TSC_PG_PRESC_DIV32) || \
+ ((VAL) == TSC_PG_PRESC_DIV64) || \
+ ((VAL) == TSC_PG_PRESC_DIV128))
+
+#define TSC_MCV_255 ((uint32_t)(0 << 5))
+#define TSC_MCV_511 ((uint32_t)(1 << 5))
+#define TSC_MCV_1023 ((uint32_t)(2 << 5))
+#define TSC_MCV_2047 ((uint32_t)(3 << 5))
+#define TSC_MCV_4095 ((uint32_t)(4 << 5))
+#define TSC_MCV_8191 ((uint32_t)(5 << 5))
+#define TSC_MCV_16383 ((uint32_t)(6 << 5))
+#define IS_TSC_MCV(VAL) (((VAL) == TSC_MCV_255) || \
+ ((VAL) == TSC_MCV_511) || \
+ ((VAL) == TSC_MCV_1023) || \
+ ((VAL) == TSC_MCV_2047) || \
+ ((VAL) == TSC_MCV_4095) || \
+ ((VAL) == TSC_MCV_8191) || \
+ ((VAL) == TSC_MCV_16383))
+
+#define TSC_IODEF_OUT_PP_LOW ((uint32_t)0)
+#define TSC_IODEF_IN_FLOAT (TSC_CR_IODEF)
+#define IS_TSC_IODEF(VAL) (((VAL) == TSC_IODEF_OUT_PP_LOW) || ((VAL) == TSC_IODEF_IN_FLOAT))
+
+#define TSC_SYNC_POL_FALL ((uint32_t)0)
+#define TSC_SYNC_POL_RISE_HIGH (TSC_CR_SYNCPOL)
+#define IS_TSC_SYNC_POL(VAL) (((VAL) == TSC_SYNC_POL_FALL) || ((VAL) == TSC_SYNC_POL_RISE_HIGH))
+
+#define TSC_ACQ_MODE_NORMAL ((uint32_t)0)
+#define TSC_ACQ_MODE_SYNCHRO (TSC_CR_AM)
+#define IS_TSC_ACQ_MODE(VAL) (((VAL) == TSC_ACQ_MODE_NORMAL) || ((VAL) == TSC_ACQ_MODE_SYNCHRO))
+
+#define TSC_IOMODE_UNUSED ((uint32_t)0)
+#define TSC_IOMODE_CHANNEL ((uint32_t)1)
+#define TSC_IOMODE_SHIELD ((uint32_t)2)
+#define TSC_IOMODE_SAMPLING ((uint32_t)3)
+#define IS_TSC_IOMODE(VAL) (((VAL) == TSC_IOMODE_UNUSED) || \
+ ((VAL) == TSC_IOMODE_CHANNEL) || \
+ ((VAL) == TSC_IOMODE_SHIELD) || \
+ ((VAL) == TSC_IOMODE_SAMPLING))
+
+/** @defgroup TSC_interrupts_definition TSC interrupts definition
+ * @{
+ */
+#define TSC_IT_EOA ((uint32_t)TSC_IER_EOAIE)
+#define TSC_IT_MCE ((uint32_t)TSC_IER_MCEIE)
+#define IS_TSC_MCE_IT(VAL) (((VAL) == DISABLE) || ((VAL) == ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup TSC_flags_definition TSC Flags Definition
+ * @{
+ */
+#define TSC_FLAG_EOA ((uint32_t)TSC_ISR_EOAF)
+#define TSC_FLAG_MCE ((uint32_t)TSC_ISR_MCEF)
+/**
+ * @}
+ */
+
+#define TSC_NB_OF_GROUPS (8)
+
+#define TSC_GROUP1 ((uint32_t)0x00000001)
+#define TSC_GROUP2 ((uint32_t)0x00000002)
+#define TSC_GROUP3 ((uint32_t)0x00000004)
+#define TSC_GROUP4 ((uint32_t)0x00000008)
+#define TSC_GROUP5 ((uint32_t)0x00000010)
+#define TSC_GROUP6 ((uint32_t)0x00000020)
+#define TSC_GROUP7 ((uint32_t)0x00000040)
+#define TSC_GROUP8 ((uint32_t)0x00000080)
+#define TSC_ALL_GROUPS ((uint32_t)0x000000FF)
+
+#define TSC_GROUP1_IDX ((uint32_t)0)
+#define TSC_GROUP2_IDX ((uint32_t)1)
+#define TSC_GROUP3_IDX ((uint32_t)2)
+#define TSC_GROUP4_IDX ((uint32_t)3)
+#define TSC_GROUP5_IDX ((uint32_t)4)
+#define TSC_GROUP6_IDX ((uint32_t)5)
+#define TSC_GROUP7_IDX ((uint32_t)6)
+#define TSC_GROUP8_IDX ((uint32_t)7)
+#define IS_GROUP_INDEX(VAL) (((VAL) == 0) || (((VAL) > 0) && ((VAL) < TSC_NB_OF_GROUPS)))
+
+#define TSC_GROUP1_IO1 ((uint32_t)0x00000001)
+#define TSC_GROUP1_IO2 ((uint32_t)0x00000002)
+#define TSC_GROUP1_IO3 ((uint32_t)0x00000004)
+#define TSC_GROUP1_IO4 ((uint32_t)0x00000008)
+#define TSC_GROUP1_ALL_IOS ((uint32_t)0x0000000F)
+
+#define TSC_GROUP2_IO1 ((uint32_t)0x00000010)
+#define TSC_GROUP2_IO2 ((uint32_t)0x00000020)
+#define TSC_GROUP2_IO3 ((uint32_t)0x00000040)
+#define TSC_GROUP2_IO4 ((uint32_t)0x00000080)
+#define TSC_GROUP2_ALL_IOS ((uint32_t)0x000000F0)
+
+#define TSC_GROUP3_IO1 ((uint32_t)0x00000100)
+#define TSC_GROUP3_IO2 ((uint32_t)0x00000200)
+#define TSC_GROUP3_IO3 ((uint32_t)0x00000400)
+#define TSC_GROUP3_IO4 ((uint32_t)0x00000800)
+#define TSC_GROUP3_ALL_IOS ((uint32_t)0x00000F00)
+
+#define TSC_GROUP4_IO1 ((uint32_t)0x00001000)
+#define TSC_GROUP4_IO2 ((uint32_t)0x00002000)
+#define TSC_GROUP4_IO3 ((uint32_t)0x00004000)
+#define TSC_GROUP4_IO4 ((uint32_t)0x00008000)
+#define TSC_GROUP4_ALL_IOS ((uint32_t)0x0000F000)
+
+#define TSC_GROUP5_IO1 ((uint32_t)0x00010000)
+#define TSC_GROUP5_IO2 ((uint32_t)0x00020000)
+#define TSC_GROUP5_IO3 ((uint32_t)0x00040000)
+#define TSC_GROUP5_IO4 ((uint32_t)0x00080000)
+#define TSC_GROUP5_ALL_IOS ((uint32_t)0x000F0000)
+
+#define TSC_GROUP6_IO1 ((uint32_t)0x00100000)
+#define TSC_GROUP6_IO2 ((uint32_t)0x00200000)
+#define TSC_GROUP6_IO3 ((uint32_t)0x00400000)
+#define TSC_GROUP6_IO4 ((uint32_t)0x00800000)
+#define TSC_GROUP6_ALL_IOS ((uint32_t)0x00F00000)
+
+#define TSC_GROUP7_IO1 ((uint32_t)0x01000000)
+#define TSC_GROUP7_IO2 ((uint32_t)0x02000000)
+#define TSC_GROUP7_IO3 ((uint32_t)0x04000000)
+#define TSC_GROUP7_IO4 ((uint32_t)0x08000000)
+#define TSC_GROUP7_ALL_IOS ((uint32_t)0x0F000000)
+
+#define TSC_GROUP8_IO1 ((uint32_t)0x10000000)
+#define TSC_GROUP8_IO2 ((uint32_t)0x20000000)
+#define TSC_GROUP8_IO3 ((uint32_t)0x40000000)
+#define TSC_GROUP8_IO4 ((uint32_t)0x80000000)
+#define TSC_GROUP8_ALL_IOS ((uint32_t)0xF0000000)
+
+#define TSC_ALL_GROUPS_ALL_IOS ((uint32_t)0xFFFFFFFF)
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup TSC_Exported_Macros TSC Exported Macros
+ * @{
+ */
+
+/** @brief Reset TSC handle state
+ * @param __HANDLE__: TSC handle.
+ * @retval None
+ */
+#define __HAL_TSC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TSC_STATE_RESET)
+
+/**
+ * @brief Enable the TSC peripheral.
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= TSC_CR_TSCE)
+
+/**
+ * @brief Disable the TSC peripheral.
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= (uint32_t)(~TSC_CR_TSCE))
+
+/**
+ * @brief Start acquisition
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_START_ACQ(__HANDLE__) ((__HANDLE__)->Instance->CR |= TSC_CR_START)
+
+/**
+ * @brief Stop acquisition
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_STOP_ACQ(__HANDLE__) ((__HANDLE__)->Instance->CR &= (uint32_t)(~TSC_CR_START))
+
+/**
+ * @brief Set IO default mode to output push-pull low
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_SET_IODEF_OUTPPLOW(__HANDLE__) ((__HANDLE__)->Instance->CR &= (uint32_t)(~TSC_CR_IODEF))
+
+/**
+ * @brief Set IO default mode to input floating
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_SET_IODEF_INFLOAT(__HANDLE__) ((__HANDLE__)->Instance->CR |= TSC_CR_IODEF)
+
+/**
+ * @brief Set synchronization polarity to falling edge
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_SET_SYNC_POL_FALL(__HANDLE__) ((__HANDLE__)->Instance->CR &= (uint32_t)(~TSC_CR_SYNCPOL))
+
+/**
+ * @brief Set synchronization polarity to rising edge and high level
+ * @param __HANDLE__: TSC handle
+ * @retval None
+ */
+#define __HAL_TSC_SET_SYNC_POL_RISE_HIGH(__HANDLE__) ((__HANDLE__)->Instance->CR |= TSC_CR_SYNCPOL)
+
+/**
+ * @brief Enable TSC interrupt.
+ * @param __HANDLE__: TSC handle
+ * @param __INTERRUPT__: TSC interrupt
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+/**
+ * @brief Disable TSC interrupt.
+ * @param __HANDLE__: TSC handle
+ * @param __INTERRUPT__: TSC interrupt
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (uint32_t)(~(__INTERRUPT__)))
+
+/** @brief Check if the specified TSC interrupt source is enabled or disabled.
+ * @param __HANDLE__: TSC Handle
+ * @param __INTERRUPT__: TSC interrupt
+ * @retval SET or RESET
+ */
+#define __HAL_TSC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+ * @brief Get the selected TSC's flag status.
+ * @param __HANDLE__: TSC handle
+ * @param __FLAG__: TSC flag
+ * @retval SET or RESET
+ */
+#define __HAL_TSC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) ? SET : RESET)
+
+/**
+ * @brief Clear the TSC's pending flag.
+ * @param __HANDLE__: TSC handle
+ * @param __FLAG__: TSC flag
+ * @retval None
+ */
+#define __HAL_TSC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/**
+ * @brief Enable schmitt trigger hysteresis on a group of IOs
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE_HYSTERESIS(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOHCR |= (__GX_IOY_MASK__))
+
+/**
+ * @brief Disable schmitt trigger hysteresis on a group of IOs
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE_HYSTERESIS(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOHCR &= (uint32_t)(~(__GX_IOY_MASK__)))
+
+/**
+ * @brief Open analog switch on a group of IOs
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_OPEN_ANALOG_SWITCH(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOASCR &= (uint32_t)(~(__GX_IOY_MASK__)))
+
+/**
+ * @brief Close analog switch on a group of IOs
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_CLOSE_ANALOG_SWITCH(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOASCR |= (__GX_IOY_MASK__))
+
+/**
+ * @brief Enable a group of IOs in channel mode
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE_CHANNEL(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOCCR |= (__GX_IOY_MASK__))
+
+/**
+ * @brief Disable a group of channel IOs
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE_CHANNEL(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOCCR &= (uint32_t)(~(__GX_IOY_MASK__)))
+
+/**
+ * @brief Enable a group of IOs in sampling mode
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE_SAMPLING(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOSCR |= (__GX_IOY_MASK__))
+
+/**
+ * @brief Disable a group of sampling IOs
+ * @param __HANDLE__: TSC handle
+ * @param __GX_IOY_MASK__: IOs mask
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE_SAMPLING(__HANDLE__, __GX_IOY_MASK__) ((__HANDLE__)->Instance->IOSCR &= (uint32_t)(~(__GX_IOY_MASK__)))
+
+/**
+ * @brief Enable acquisition groups
+ * @param __HANDLE__: TSC handle
+ * @param __GX_MASK__: Groups mask
+ * @retval None
+ */
+#define __HAL_TSC_ENABLE_GROUP(__HANDLE__, __GX_MASK__) ((__HANDLE__)->Instance->IOGCSR |= (__GX_MASK__))
+
+/**
+ * @brief Disable acquisition groups
+ * @param __HANDLE__: TSC handle
+ * @param __GX_MASK__: Groups mask
+ * @retval None
+ */
+#define __HAL_TSC_DISABLE_GROUP(__HANDLE__, __GX_MASK__) ((__HANDLE__)->Instance->IOGCSR &= (uint32_t)(~(__GX_MASK__)))
+
+/** @brief Gets acquisition group status
+ * @param __HANDLE__: TSC Handle
+ * @param __GX_INDEX__: Group index
+ * @retval SET or RESET
+ */
+#define __HAL_TSC_GET_GROUP_STATUS(__HANDLE__, __GX_INDEX__) \
+((((__HANDLE__)->Instance->IOGCSR & (uint32_t)((uint32_t)1 << ((__GX_INDEX__) + (uint32_t)16))) == (uint32_t)((uint32_t)1 << ((__GX_INDEX__) + (uint32_t)16))) ? TSC_GROUP_COMPLETED : TSC_GROUP_ONGOING)
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup TSC_Exported_Functions TSC Exported Functions
+ * @{
+ */
+
+/** @addtogroup TSC_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+ /* Initialization and de-initialization functions *****************************/
+HAL_StatusTypeDef HAL_TSC_Init(TSC_HandleTypeDef* htsc);
+HAL_StatusTypeDef HAL_TSC_DeInit(TSC_HandleTypeDef *htsc);
+void HAL_TSC_MspInit(TSC_HandleTypeDef* htsc);
+void HAL_TSC_MspDeInit(TSC_HandleTypeDef* htsc);
+/**
+ * @}
+ */
+
+/** @addtogroup TSC_Exported_Functions_Group2 Input and Output operation functions
+ * @brief IO operation functions
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_TSC_Start(TSC_HandleTypeDef* htsc);
+HAL_StatusTypeDef HAL_TSC_Start_IT(TSC_HandleTypeDef* htsc);
+HAL_StatusTypeDef HAL_TSC_Stop(TSC_HandleTypeDef* htsc);
+HAL_StatusTypeDef HAL_TSC_Stop_IT(TSC_HandleTypeDef* htsc);
+TSC_GroupStatusTypeDef HAL_TSC_GroupGetStatus(TSC_HandleTypeDef* htsc, uint32_t gx_index);
+uint32_t HAL_TSC_GroupGetValue(TSC_HandleTypeDef* htsc, uint32_t gx_index);
+/**
+ * @}
+ */
+
+/** @addtogroup TSC_Exported_Functions_Group3 Peripheral Control functions
+ * @brief Peripheral Control functions
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_TSC_IOConfig(TSC_HandleTypeDef* htsc, TSC_IOConfigTypeDef* config);
+HAL_StatusTypeDef HAL_TSC_IODischarge(TSC_HandleTypeDef* htsc, uint32_t choice);
+/**
+ * @}
+ */
+
+/** @addtogroup TSC_Exported_Functions_Group4 Peripheral State functions
+ * @brief State functions
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_TSC_StateTypeDef HAL_TSC_GetState(TSC_HandleTypeDef* htsc);
+HAL_StatusTypeDef HAL_TSC_PollForAcquisition(TSC_HandleTypeDef* htsc);
+void HAL_TSC_IRQHandler(TSC_HandleTypeDef* htsc);
+/**
+ * @}
+ */
+
+
+/* Callback functions *********************************************************/
+void HAL_TSC_ConvCpltCallback(TSC_HandleTypeDef* htsc);
+void HAL_TSC_ErrorCallback(TSC_HandleTypeDef* htsc);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__STM32F3xx_TSC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_uart.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1064 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_uart.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of UART HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_UART_H
+#define __STM32F3xx_HAL_UART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup UART
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup UART_Exported_Types UART Exported Types
+ * @{
+ */
+
+/**
+ * @brief UART Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
+ The baud rate register is computed using the following formula:
+ - If oversampling is 16 or in LIN mode,
+ Baud Rate Register = ((PCLKx) / ((huart->Init.BaudRate)))
+ - If oversampling is 8,
+ Baud Rate Register[15:4] = ((2 * PCLKx) / ((huart->Init.BaudRate)))[15:4]
+ Baud Rate Register[3] = 0
+ Baud Rate Register[2:0] = (((2 * PCLKx) / ((huart->Init.BaudRate)))[3:0]) >> 1 */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref UARTEx_Word_Length */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref UART_Stop_Bits */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref UART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref UART_Mode */
+
+ uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled
+ or disabled.
+ This parameter can be a value of @ref UART_Hardware_Flow_Control */
+
+ uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
+ This parameter can be a value of @ref UART_Over_Sampling */
+
+ uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected.
+ Selecting the single sample method increases the receiver tolerance to clock
+ deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */
+}UART_InitTypeDef;
+
+/**
+ * @brief UART Advanced Features initalization structure definition
+ */
+typedef struct
+{
+ uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several
+ Advanced Features may be initialized at the same time .
+ This parameter can be a value of @ref UART_Advanced_Features_Initialization_Type */
+
+ uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted.
+ This parameter can be a value of @ref UART_Tx_Inv */
+
+ uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted.
+ This parameter can be a value of @ref UART_Rx_Inv */
+
+ uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic
+ vs negative/inverted logic).
+ This parameter can be a value of @ref UART_Data_Inv */
+
+ uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped.
+ This parameter can be a value of @ref UART_Rx_Tx_Swap */
+
+ uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled.
+ This parameter can be a value of @ref UART_Overrun_Disable */
+
+ uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error.
+ This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error */
+
+ uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled.
+ This parameter can be a value of @ref UART_AutoBaudRate_Enable */
+
+ uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate
+ detection is carried out.
+ This parameter can be a value of @ref UART_AutoBaud_Rate_Mode */
+
+ uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line.
+ This parameter can be a value of @ref UART_MSB_First */
+} UART_AdvFeatureInitTypeDef;
+
+/**
+ * @brief UART wake up from stop mode parameters
+ */
+typedef struct
+{
+ uint32_t WakeUpEvent; /*!< Specifies which event will activat the Wakeup from Stop mode flag (WUF).
+ This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection.
+ If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must
+ be filled up. */
+
+ uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long.
+ This parameter can be a value of @ref UART_WakeUp_Address_Length */
+
+ uint8_t Address; /*!< UART/USART node address (7-bit long max) */
+} UART_WakeUpTypeDef;
+
+/**
+ * @brief HAL UART State structures definition
+ */
+typedef enum
+{
+ HAL_UART_STATE_RESET = 0x00, /*!< Peripheral is not initialized */
+ HAL_UART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_UART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_UART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_UART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_UART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_UART_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_UART_STATE_ERROR = 0x04 /*!< Error */
+}HAL_UART_StateTypeDef;
+
+/**
+ * @brief HAL UART Error Code structure definition
+ */
+typedef enum
+{
+ HAL_UART_ERROR_NONE = 0x00, /*!< No error */
+ HAL_UART_ERROR_PE = 0x01, /*!< Parity error */
+ HAL_UART_ERROR_NE = 0x02, /*!< Noise error */
+ HAL_UART_ERROR_FE = 0x04, /*!< frame error */
+ HAL_UART_ERROR_ORE = 0x08, /*!< Overrun error */
+ HAL_UART_ERROR_DMA = 0x10 /*!< DMA transfer error */
+}HAL_UART_ErrorTypeDef;
+
+/**
+ * @brief UART clock sources definition
+ */
+typedef enum
+{
+ UART_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */
+ UART_CLOCKSOURCE_PCLK2 = 0x01, /*!< PCLK2 clock source */
+ UART_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */
+ UART_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */
+ UART_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */
+ UART_CLOCKSOURCE_UNDEFINED = 0x10 /*!< Undefined clock source */
+}UART_ClockSourceTypeDef;
+
+/**
+ * @brief UART handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /* UART registers base address */
+
+ UART_InitTypeDef Init; /* UART communication parameters */
+
+ UART_AdvFeatureInitTypeDef AdvancedInit; /* UART Advanced Features initialization parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to UART Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* UART Tx Transfer size */
+
+ uint16_t TxXferCount; /* UART Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to UART Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* UART Rx Transfer size */
+
+ uint16_t RxXferCount; /* UART Rx Transfer Counter */
+
+ uint16_t Mask; /* UART Rx RDR register mask */
+
+ DMA_HandleTypeDef *hdmatx; /* UART Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* UART Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ HAL_UART_StateTypeDef State; /* UART communication state */
+
+ HAL_UART_ErrorTypeDef ErrorCode; /* UART Error code */
+
+}UART_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup UART_Exported_Constants UART Exported Constants
+ * @{
+ */
+
+/** @defgroup UART_Stop_Bits UART Number of Stop Bits
+ * @{
+ */
+#define UART_STOPBITS_1 ((uint32_t)0x0000)
+#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \
+ ((STOPBITS) == UART_STOPBITS_2))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Parity UART Parity
+ * @{
+ */
+#define UART_PARITY_NONE ((uint32_t)0x0000)
+#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \
+ ((PARITY) == UART_PARITY_EVEN) || \
+ ((PARITY) == UART_PARITY_ODD))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
+ * @{
+ */
+#define UART_HWCONTROL_NONE ((uint32_t)0x0000)
+#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE)
+#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE)
+#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE))
+#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
+ (((CONTROL) == UART_HWCONTROL_NONE) || \
+ ((CONTROL) == UART_HWCONTROL_RTS) || \
+ ((CONTROL) == UART_HWCONTROL_CTS) || \
+ ((CONTROL) == UART_HWCONTROL_RTS_CTS))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Mode UART Transfer Mode
+ * @{
+ */
+#define UART_MODE_RX ((uint32_t)USART_CR1_RE)
+#define UART_MODE_TX ((uint32_t)USART_CR1_TE)
+#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_UART_MODE(MODE) ((((MODE) & (~((uint32_t)(UART_MODE_TX_RX)))) == (uint32_t)0x00) && ((MODE) != (uint32_t)0x00))
+/**
+ * @}
+ */
+
+ /** @defgroup UART_State UART State
+ * @{
+ */
+#define UART_STATE_DISABLE ((uint32_t)0x0000)
+#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE)
+#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \
+ ((STATE) == UART_STATE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Over_Sampling UART Over Sampling
+ * @{
+ */
+#define UART_OVERSAMPLING_16 ((uint32_t)0x0000)
+#define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8)
+#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \
+ ((SAMPLING) == UART_OVERSAMPLING_8))
+/**
+ * @}
+ */
+
+/** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method
+ * @{
+ */
+#define UART_ONEBIT_SAMPLING_DISABLED ((uint32_t)0x0000)
+#define UART_ONEBIT_SAMPLING_ENABLED ((uint32_t)USART_CR3_ONEBIT)
+#define IS_UART_ONEBIT_SAMPLING(ONEBIT) (((ONEBIT) == UART_ONEBIT_SAMPLING_DISABLED) || \
+ ((ONEBIT) == UART_ONEBIT_SAMPLING_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup UART_AutoBaud_Rate_Mode UART Advanced Feature AutoBaud Rate Mode
+ * @{
+ */
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x0000)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME ((uint32_t)USART_CR2_ABRMODE_1)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME ((uint32_t)USART_CR2_ABRMODE)
+#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(MODE) (((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \
+ ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \
+ ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \
+ ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Receiver_TimeOut UART Receiver TimeOut
+ * @{
+ */
+#define UART_RECEIVER_TIMEOUT_DISABLE ((uint32_t)0x00000000)
+#define UART_RECEIVER_TIMEOUT_ENABLE ((uint32_t)USART_CR2_RTOEN)
+#define IS_UART_RECEIVER_TIMEOUT(TIMEOUT) (((TIMEOUT) == UART_RECEIVER_TIMEOUT_DISABLE) || \
+ ((TIMEOUT) == UART_RECEIVER_TIMEOUT_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_LIN UART Local Interconnection Network mode
+ * @{
+ */
+#define UART_LIN_DISABLE ((uint32_t)0x00000000)
+#define UART_LIN_ENABLE ((uint32_t)USART_CR2_LINEN)
+#define IS_UART_LIN(LIN) (((LIN) == UART_LIN_DISABLE) || \
+ ((LIN) == UART_LIN_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_LIN_Break_Detection UART LIN Break Detection
+ * @{
+ */
+#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000)
+#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL)
+#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
+ ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
+/**
+ * @}
+ */
+
+
+
+/** @defgroup UART_One_Bit UART One Bit sampling
+ * @{
+ */
+#define UART_ONE_BIT_SAMPLE_DISABLED ((uint32_t)0x00000000)
+#define UART_ONE_BIT_SAMPLE_ENABLED ((uint32_t)USART_CR3_ONEBIT)
+#define IS_UART_ONEBIT_SAMPLE(ONEBIT) (((ONEBIT) == UART_ONE_BIT_SAMPLE_DISABLED) || \
+ ((ONEBIT) == UART_ONE_BIT_SAMPLE_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup UART_DMA_Tx UART DMA Tx
+ * @{
+ */
+#define UART_DMA_TX_DISABLE ((uint32_t)0x00000000)
+#define UART_DMA_TX_ENABLE ((uint32_t)USART_CR3_DMAT)
+#define IS_UART_DMA_TX(DMATX) (((DMATX) == UART_DMA_TX_DISABLE) || \
+ ((DMATX) == UART_DMA_TX_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_DMA_Rx UART DMA Rx
+ * @{
+ */
+#define UART_DMA_RX_DISABLE ((uint32_t)0x0000)
+#define UART_DMA_RX_ENABLE ((uint32_t)USART_CR3_DMAR)
+#define IS_UART_DMA_RX(DMARX) (((DMARX) == UART_DMA_RX_DISABLE) || \
+ ((DMARX) == UART_DMA_RX_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection
+ * @{
+ */
+#define UART_HALF_DUPLEX_DISABLE ((uint32_t)0x0000)
+#define UART_HALF_DUPLEX_ENABLE ((uint32_t)USART_CR3_HDSEL)
+#define IS_UART_HALF_DUPLEX(HDSEL) (((HDSEL) == UART_HALF_DUPLEX_DISABLE) || \
+ ((HDSEL) == UART_HALF_DUPLEX_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_WakeUp_Methods UART WakeUp Methods
+ * @{
+ */
+#define UART_WAKEUPMETHOD_IDLELINE ((uint32_t)0x00000000)
+#define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)USART_CR1_WAKE)
+#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \
+ ((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Flags UART Status Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the ISR register
+ * @{
+ */
+#define UART_FLAG_REACK ((uint32_t)0x00400000)
+#define UART_FLAG_TEACK ((uint32_t)0x00200000)
+#define UART_FLAG_WUF ((uint32_t)0x00100000)
+#define UART_FLAG_RWU ((uint32_t)0x00080000)
+#define UART_FLAG_SBKF ((uint32_t)0x00040000
+#define UART_FLAG_CMF ((uint32_t)0x00020000)
+#define UART_FLAG_BUSY ((uint32_t)0x00010000)
+#define UART_FLAG_ABRF ((uint32_t)0x00008000)
+#define UART_FLAG_ABRE ((uint32_t)0x00004000)
+#define UART_FLAG_EOBF ((uint32_t)0x00001000)
+#define UART_FLAG_RTOF ((uint32_t)0x00000800)
+#define UART_FLAG_CTS ((uint32_t)0x00000400)
+#define UART_FLAG_CTSIF ((uint32_t)0x00000200)
+#define UART_FLAG_LBDF ((uint32_t)0x00000100)
+#define UART_FLAG_TXE ((uint32_t)0x00000080)
+#define UART_FLAG_TC ((uint32_t)0x00000040)
+#define UART_FLAG_RXNE ((uint32_t)0x00000020)
+#define UART_FLAG_IDLE ((uint32_t)0x00000010)
+#define UART_FLAG_ORE ((uint32_t)0x00000008)
+#define UART_FLAG_NE ((uint32_t)0x00000004)
+#define UART_FLAG_FE ((uint32_t)0x00000002)
+#define UART_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Interrupt_definition UART Interrupts Definition
+ * Elements values convention: 0000ZZZZ0XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ * @{
+ */
+#define UART_IT_PE ((uint16_t)0x0028)
+#define UART_IT_TXE ((uint16_t)0x0727)
+#define UART_IT_TC ((uint16_t)0x0626)
+#define UART_IT_RXNE ((uint16_t)0x0525)
+#define UART_IT_IDLE ((uint16_t)0x0424)
+#define UART_IT_LBD ((uint16_t)0x0846)
+#define UART_IT_CTS ((uint16_t)0x096A)
+#define UART_IT_CM ((uint16_t)0x142E)
+#define UART_IT_WUF ((uint16_t)0x1476)
+
+/** Elements values convention: 000000000XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ */
+#define UART_IT_ERR ((uint16_t)0x0060)
+
+/** Elements values convention: 0000ZZZZ00000000b
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ */
+#define UART_IT_ORE ((uint16_t)0x0300)
+#define UART_IT_NE ((uint16_t)0x0200)
+#define UART_IT_FE ((uint16_t)0x0100)
+/**
+ * @}
+ */
+
+/** @defgroup UART_IT_CLEAR_Flags UART Interruption Clear Flags
+ * @{
+ */
+#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
+#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
+#define UART_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
+#define UART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
+#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */
+#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
+#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag */
+#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */
+#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */
+#define UART_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */
+#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */
+#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Request_Parameters UART Request Parameters
+ * @{
+ */
+#define UART_AUTOBAUD_REQUEST ((uint32_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */
+#define UART_SENDBREAK_REQUEST ((uint32_t)USART_RQR_SBKRQ) /*!< Send Break Request */
+#define UART_MUTE_MODE_REQUEST ((uint32_t)USART_RQR_MMRQ) /*!< Mute Mode Request */
+#define UART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
+#define UART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
+#define IS_UART_REQUEST_PARAMETER(PARAM) (((PARAM) == UART_AUTOBAUD_REQUEST) || \
+ ((PARAM) == UART_SENDBREAK_REQUEST) || \
+ ((PARAM) == UART_MUTE_MODE_REQUEST) || \
+ ((PARAM) == UART_RXDATA_FLUSH_REQUEST) || \
+ ((PARAM) == UART_TXDATA_FLUSH_REQUEST))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type
+ * @{
+ */
+#define UART_ADVFEATURE_NO_INIT ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_TXINVERT_INIT ((uint32_t)0x00000001)
+#define UART_ADVFEATURE_RXINVERT_INIT ((uint32_t)0x00000002)
+#define UART_ADVFEATURE_DATAINVERT_INIT ((uint32_t)0x00000004)
+#define UART_ADVFEATURE_SWAP_INIT ((uint32_t)0x00000008)
+#define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT ((uint32_t)0x00000010)
+#define UART_ADVFEATURE_DMADISABLEONERROR_INIT ((uint32_t)0x00000020)
+#define UART_ADVFEATURE_AUTOBAUDRATE_INIT ((uint32_t)0x00000040)
+#define UART_ADVFEATURE_MSBFIRST_INIT ((uint32_t)0x00000080)
+#define IS_UART_ADVFEATURE_INIT(INIT) ((INIT) <= (UART_ADVFEATURE_NO_INIT | \
+ UART_ADVFEATURE_TXINVERT_INIT | \
+ UART_ADVFEATURE_RXINVERT_INIT | \
+ UART_ADVFEATURE_DATAINVERT_INIT | \
+ UART_ADVFEATURE_SWAP_INIT | \
+ UART_ADVFEATURE_RXOVERRUNDISABLE_INIT | \
+ UART_ADVFEATURE_DMADISABLEONERROR_INIT | \
+ UART_ADVFEATURE_AUTOBAUDRATE_INIT | \
+ UART_ADVFEATURE_MSBFIRST_INIT))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion
+ * @{
+ */
+#define UART_ADVFEATURE_TXINV_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_TXINV_ENABLE ((uint32_t)USART_CR2_TXINV)
+#define IS_UART_ADVFEATURE_TXINV(TXINV) (((TXINV) == UART_ADVFEATURE_TXINV_DISABLE) || \
+ ((TXINV) == UART_ADVFEATURE_TXINV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion
+ * @{
+ */
+#define UART_ADVFEATURE_RXINV_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_RXINV_ENABLE ((uint32_t)USART_CR2_RXINV)
+#define IS_UART_ADVFEATURE_RXINV(RXINV) (((RXINV) == UART_ADVFEATURE_RXINV_DISABLE) || \
+ ((RXINV) == UART_ADVFEATURE_RXINV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion
+ * @{
+ */
+#define UART_ADVFEATURE_DATAINV_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_DATAINV_ENABLE ((uint32_t)USART_CR2_DATAINV)
+#define IS_UART_ADVFEATURE_DATAINV(DATAINV) (((DATAINV) == UART_ADVFEATURE_DATAINV_DISABLE) || \
+ ((DATAINV) == UART_ADVFEATURE_DATAINV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap
+ * @{
+ */
+#define UART_ADVFEATURE_SWAP_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_SWAP_ENABLE ((uint32_t)USART_CR2_SWAP)
+#define IS_UART_ADVFEATURE_SWAP(SWAP) (((SWAP) == UART_ADVFEATURE_SWAP_DISABLE) || \
+ ((SWAP) == UART_ADVFEATURE_SWAP_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable
+ * @{
+ */
+#define UART_ADVFEATURE_OVERRUN_ENABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_OVERRUN_DISABLE ((uint32_t)USART_CR3_OVRDIS)
+#define IS_UART_OVERRUN(OVERRUN) (((OVERRUN) == UART_ADVFEATURE_OVERRUN_ENABLE) || \
+ ((OVERRUN) == UART_ADVFEATURE_OVERRUN_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable
+ * @{
+ */
+#define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE ((uint32_t)USART_CR2_ABREN)
+#define IS_UART_ADVFEATURE_AUTOBAUDRATE(AUTOBAUDRATE) (((AUTOBAUDRATE) == UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \
+ ((AUTOBAUDRATE) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error
+ * @{
+ */
+#define UART_ADVFEATURE_DMA_ENABLEONRXERROR ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_DMA_DISABLEONRXERROR ((uint32_t)USART_CR3_DDRE)
+#define IS_UART_ADVFEATURE_DMAONRXERROR(DMA) (((DMA) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) || \
+ ((DMA) == UART_ADVFEATURE_DMA_DISABLEONRXERROR))
+/**
+ * @}
+ */
+
+/** @defgroup UART_MSB_First UART Advanced Feature MSB First
+ * @{
+ */
+#define UART_ADVFEATURE_MSBFIRST_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_MSBFIRST_ENABLE ((uint32_t)USART_CR2_MSBFIRST)
+#define IS_UART_ADVFEATURE_MSBFIRST(MSBFIRST) (((MSBFIRST) == UART_ADVFEATURE_MSBFIRST_DISABLE) || \
+ ((MSBFIRST) == UART_ADVFEATURE_MSBFIRST_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Stop_Mode_Enable UART Advanced Feature Stop Mode Enable
+ * @{
+ */
+#define UART_ADVFEATURE_STOPMODE_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_STOPMODE_ENABLE ((uint32_t)USART_CR1_UESM)
+#define IS_UART_ADVFEATURE_STOPMODE(STOPMODE) (((STOPMODE) == UART_ADVFEATURE_STOPMODE_DISABLE) || \
+ ((STOPMODE) == UART_ADVFEATURE_STOPMODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable
+ * @{
+ */
+#define UART_ADVFEATURE_MUTEMODE_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_MUTEMODE_ENABLE ((uint32_t)USART_CR1_MME)
+#define IS_UART_MUTE_MODE(MUTE) (((MUTE) == UART_ADVFEATURE_MUTEMODE_DISABLE) || \
+ ((MUTE) == UART_ADVFEATURE_MUTEMODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register
+ * @{
+ */
+#define UART_CR2_ADDRESS_LSB_POS ((uint32_t) 24)
+/**
+ * @}
+ */
+
+/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection
+ * @{
+ */
+#define UART_WAKEUP_ON_ADDRESS ((uint32_t)0x0000)
+#define UART_WAKEUP_ON_STARTBIT ((uint32_t)USART_CR3_WUS_1)
+#define UART_WAKEUP_ON_READDATA_NONEMPTY ((uint32_t)USART_CR3_WUS)
+#define IS_UART_WAKEUP_SELECTION(WAKE) (((WAKE) == UART_WAKEUP_ON_ADDRESS) || \
+ ((WAKE) == UART_WAKEUP_ON_STARTBIT) || \
+ ((WAKE) == UART_WAKEUP_ON_READDATA_NONEMPTY))
+/**
+ * @}
+ */
+
+/** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity
+ * @{
+ */
+#define UART_DE_POLARITY_HIGH ((uint32_t)0x00000000)
+#define UART_DE_POLARITY_LOW ((uint32_t)USART_CR3_DEP)
+#define IS_UART_DE_POLARITY(POLARITY) (((POLARITY) == UART_DE_POLARITY_HIGH) || \
+ ((POLARITY) == UART_DE_POLARITY_LOW))
+/**
+ * @}
+ */
+
+/** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register
+ * @{
+ */
+#define UART_CR1_DEAT_ADDRESS_LSB_POS ((uint32_t) 21)
+/**
+ * @}
+ */
+
+/** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register
+ * @{
+ */
+#define UART_CR1_DEDT_ADDRESS_LSB_POS ((uint32_t) 16)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask
+ * @{
+ */
+#define UART_IT_MASK ((uint32_t)0x001F)
+/**
+ * @}
+ */
+
+/** @defgroup UART_TimeOut_Value UART polling-based communications time-out value
+ * @{
+ */
+#define HAL_UART_TIMEOUT_VALUE 0x1FFFFFF
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup UART_Exported_Macros UART Exported Macros
+ * @{
+ */
+
+/** @brief Reset UART handle state
+ * @param __HANDLE__: UART handle.
+ * @retval None
+ */
+#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_UART_STATE_RESET)
+
+/** @brief Checks whether the specified UART flag is set or not.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral (datasheet: up to five USART/UARTs)
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg UART_FLAG_REACK: Receive enable ackowledge flag
+ * @arg UART_FLAG_TEACK: Transmit enable ackowledge flag
+ * @arg UART_FLAG_WUF: Wake up from stop mode flag
+ * @arg UART_FLAG_RWU: Receiver wake up flag (is the UART in mute mode)
+ * @arg UART_FLAG_SBKF: Send Break flag
+ * @arg UART_FLAG_CMF: Character match flag
+ * @arg UART_FLAG_BUSY: Busy flag
+ * @arg UART_FLAG_ABRF: Auto Baud rate detection flag
+ * @arg UART_FLAG_ABRE: Auto Baud rate detection error flag
+ * @arg UART_FLAG_EOBF: End of block flag
+ * @arg UART_FLAG_RTOF: Receiver timeout flag
+ * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5)
+ * @arg UART_FLAG_LBD: LIN Break detection flag
+ * @arg UART_FLAG_TXE: Transmit data register empty flag
+ * @arg UART_FLAG_TC: Transmission Complete flag
+ * @arg UART_FLAG_RXNE: Receive data register not empty flag
+ * @arg UART_FLAG_IDLE: Idle Line detection flag
+ * @arg UART_FLAG_ORE: OverRun Error flag
+ * @arg UART_FLAG_NE: Noise Error flag
+ * @arg UART_FLAG_FE: Framing Error flag
+ * @arg UART_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Enables the specified UART interrupt.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral. (datasheet: up to five USART/UARTs)
+ * @param __INTERRUPT__: specifies the UART interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_WUF: Wakeup from stop mode interrupt
+ * @arg UART_IT_CM: Character match interrupt
+ * @arg UART_IT_CTS: CTS change interrupt
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))))
+
+
+/** @brief Disables the specified UART interrupt.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral. (datasheet: up to five USART/UARTs)
+ * @param __INTERRUPT__: specifies the UART interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_WUF: Wakeup from stop mode interrupt
+ * @arg UART_IT_CM: Character match interrupt
+ * @arg UART_IT_CTS: CTS change interrupt
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))))
+
+/** @brief Checks whether the specified UART interrupt has occurred or not.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral. (datasheet: up to five USART/UARTs)
+ * @param __IT__: specifies the UART interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_WUF: Wakeup from stop mode interrupt
+ * @arg UART_IT_CM: Character match interrupt
+ * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_ORE: OverRun Error interrupt
+ * @arg UART_IT_NE: Noise Error interrupt
+ * @arg UART_IT_FE: Framing Error interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_UART_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08)))
+
+/** @brief Checks whether the specified UART interrupt source is enabled.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral. (datasheet: up to five USART/UARTs)
+ * @param __IT__: specifies the UART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
+ * @arg UART_IT_LBD: LIN Break detection interrupt
+ * @arg UART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg UART_IT_TC: Transmission complete interrupt
+ * @arg UART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg UART_IT_IDLE: Idle line detection interrupt
+ * @arg UART_IT_ORE: OverRun Error interrupt
+ * @arg UART_IT_NE: Noise Error interrupt
+ * @arg UART_IT_FE: Framing Error interrupt
+ * @arg UART_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5U) == 2)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & UART_IT_MASK)))
+
+/** @brief Clears the specified UART ISR flag, in setting the proper ICR register flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral. (datasheet: up to five USART/UARTs)
+ * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+ * to clear the corresponding interrupt
+ * This parameter can be one of the following values:
+ * @arg UART_CLEAR_PEF: Parity Error Clear Flag
+ * @arg UART_CLEAR_FEF: Framing Error Clear Flag
+ * @arg UART_CLEAR_NEF: Noise detected Clear Flag
+ * @arg UART_CLEAR_OREF: OverRun Error Clear Flag
+ * @arg UART_CLEAR_IDLEF: IDLE line detected Clear Flag
+ * @arg UART_CLEAR_TCF: Transmission Complete Clear Flag
+ * @arg UART_CLEAR_LBDF: LIN Break Detection Clear Flag
+ * @arg UART_CLEAR_CTSF: CTS Interrupt Clear Flag
+ * @arg UART_CLEAR_RTOF: Receiver Time Out Clear Flag
+ * @arg UART_CLEAR_EOBF: End Of Block Clear Flag
+ * @arg UART_CLEAR_CMF: Character Match Clear Flag
+ * @arg UART_CLEAR_WUF: Wake Up from stop mode Clear Flag
+ * @retval None
+ */
+#define __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
+
+/** @brief Set a specific UART request flag.
+ * @param __HANDLE__: specifies the UART Handle.
+ * This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral. (datasheet: up to five USART/UARTs)
+ * @param __REQ__: specifies the request flag to set
+ * This parameter can be one of the following values:
+ * @arg UART_AUTOBAUD_REQUEST: Auto-Baud Rate Request
+ * @arg UART_SENDBREAK_REQUEST: Send Break Request
+ * @arg UART_MUTE_MODE_REQUEST: Mute Mode Request
+ * @arg UART_RXDATA_FLUSH_REQUEST: Receive Data flush Request
+ * @arg UART_TXDATA_FLUSH_REQUEST: Transmit data flush Request
+ * @retval None
+ */
+#define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint32_t)(__REQ__))
+
+/** @brief Enable UART
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4 or 5 to select the UART peripheral
+ * @retval None
+ */
+#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable UART
+ * @param __HANDLE__: specifies the UART Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4 or 5 to select the UART peripheral
+ * @retval None
+ */
+#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/** @brief BRR division operation to set BRR register in 8-bit oversampling mode
+ * @param _PCLK_: UART clock
+ * @param _BAUD_: Baud rate set by the user
+ * @retval Division result
+ */
+#define __DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*2)/((_BAUD_)))
+
+/** @brief BRR division operation to set BRR register in 16-bit oversampling mode
+ * @param _PCLK_: UART clock
+ * @param _BAUD_: Baud rate set by the user
+ * @retval Division result
+ */
+#define __DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_))/((_BAUD_)))
+
+/** @brief Check UART Baud rate
+ * @param BAUDRATE: Baudrate specified by the user
+ * The maximum Baud Rate is derived from the maximum clock on F3 (i.e. 72 MHz)
+ * divided by the smallest oversampling used on the USART (i.e. 8)
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 9000001)
+
+/** @brief Check UART assertion time
+ * @param TIME: 5-bit value assertion time
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_UART_ASSERTIONTIME(TIME) ((TIME) <= 0x1F)
+
+/** @brief Check UART deassertion time
+ * @param TIME: 5-bit value deassertion time
+ * @retval Test result (TRUE or FALSE).
+ */
+#define IS_UART_DEASSERTIONTIME(TIME) ((TIME) <= 0x1F)
+
+/**
+ * @}
+ */
+
+/* Include UART HAL Extended module */
+#include "stm32f3xx_hal_uart_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup UART_Exported_Functions UART Exported Functions
+ * @{
+ */
+
+/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
+HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
+HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart);
+void HAL_UART_MspInit(UART_HandleTypeDef *huart);
+void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Exported_Functions_Group2 Input and Output operation functions
+ * @brief UART Transmit/Receive functions
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
+void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
+void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
+void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
+void HAL_UART_WakeupCallback(UART_HandleTypeDef *huart);
+
+HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions
+ * @brief UART control functions
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart);
+void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
+
+HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart);
+void UART_AdvFeatureConfig(UART_HandleTypeDef *huart);
+void UART_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
+/**
+ * @}
+ */
+
+/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Error functions
+ * @brief Peripheral State and Error functions
+ * @{
+ */
+/* Peripheral State and Error functions ***************************************/
+HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
+uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_UART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_uart_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,458 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_uart_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of UART HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_UART_EX_H
+#define __STM32F3xx_HAL_UART_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup UARTEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup UARTEx_Exported_Constants UART Extented Exported Constants
+ * @{
+ */
+
+/** @defgroup UARTEx_Word_Length UART Extended Word Length
+ * @{
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define UART_WORDLENGTH_7B ((uint32_t)USART_CR1_M1)
+#define UART_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
+#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_7B) || \
+ ((LENGTH) == UART_WORDLENGTH_8B) || \
+ ((LENGTH) == UART_WORDLENGTH_9B))
+#else
+#define UART_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \
+ ((LENGTH) == UART_WORDLENGTH_9B))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+/**
+ * @}
+ */
+
+
+/** @defgroup UART_WakeUp_Address_Length UART WakeUp Address Length
+ * @{
+ */
+#define UART_ADDRESS_DETECT_4B ((uint32_t)0x00000000)
+#define UART_ADDRESS_DETECT_7B ((uint32_t)USART_CR2_ADDM7)
+#define IS_UART_ADDRESSLENGTH_DETECT(ADDRESS) (((ADDRESS) == UART_ADDRESS_DETECT_4B) || \
+ ((ADDRESS) == UART_ADDRESS_DETECT_7B))
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup UARTEx_Exported_Macros UART Extended Exported Macros
+ * @{
+ */
+
+/** @brief Reports the UART clock source.
+ * @param __HANDLE__: specifies the UART Handle
+ * @param __CLOCKSOURCE__ : output variable
+ * @retval UART clocking source, written in __CLOCKSOURCE__.
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK2: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == UART4) \
+ { \
+ switch(__HAL_RCC_GET_UART4_SOURCE()) \
+ { \
+ case RCC_UART4CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_UART4CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_UART4CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_UART4CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if ((__HANDLE__)->Instance == UART5) \
+ { \
+ switch(__HAL_RCC_GET_UART5_SOURCE()) \
+ { \
+ case RCC_UART5CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_UART5CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_UART5CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_UART5CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ } while(0)
+#elif defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ } while(0)
+#else
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK2: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK2; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ } while(0)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F302xC || STM32F303xC || STM32F358xx */
+
+
+/** @brief Computes the UART mask to apply to retrieve the received data
+ * according to the word length and to the parity bits activation.
+ * If PCE = 1, the parity bit is not included in the data extracted
+ * by the reception API().
+ * This masking operation is not carried out in the case of
+ * DMA transfers.
+ * @param __HANDLE__: specifies the UART Handle
+ * @retval none
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __HAL_UART_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x003F ; \
+ } \
+ } \
+} while(0)
+#else
+#define __HAL_UART_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ } \
+} while(0)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup UARTEx_Exported_Functions UART Extended Exported Functions
+ * @{
+ */
+
+/** @defgroup UARTEx_Exported_Functions_Group1 Extended Initialization and de-initialization functions
+ * @brief Extended Initialization and Configuration Functions
+ * @{
+ */
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t UART_DEPolarity, uint32_t UART_DEAssertionTime, uint32_t UART_DEDeassertionTime);
+/**
+ * @}
+ */
+
+/** @defgroup UARTEx_Exported_Functions_Group2 Extended Peripheral Control functions
+ * @brief Extended Peripheral Control functions
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
+HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_UART_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_usart.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,588 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_usart.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of USART HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_USART_H
+#define __STM32F3xx_HAL_USART_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup USART
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup USART_Exported_Types USART Exported Types
+ * @{
+ */
+
+/**
+ * @brief USART Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the Usart communication baud rate.
+ The baud rate is computed using the following formula:
+ Baud Rate Register = ((PCLKx) / ((huart->Init.BaudRate))) */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref USARTEx_Word_Length */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref USART_Stop_Bits */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref USART_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref USART_Mode */
+
+ uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
+ This parameter can be a value of @ref USART_Clock_Polarity */
+
+ uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref USART_Clock_Phase */
+
+ uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref USART_Last_Bit */
+}USART_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_USART_STATE_RESET = 0x00, /*!< Peripheral is not initialized */
+ HAL_USART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_USART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_USART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_USART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_USART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission Reception process is ongoing */
+ HAL_USART_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_USART_STATE_ERROR = 0x04 /*!< Error */
+}HAL_USART_StateTypeDef;
+
+/**
+ * @brief HAL USART Error Code structure definition
+ */
+typedef enum
+{
+ HAL_USART_ERROR_NONE = 0x00, /*!< No error */
+ HAL_USART_ERROR_PE = 0x01, /*!< Parity error */
+ HAL_USART_ERROR_NE = 0x02, /*!< Noise error */
+ HAL_USART_ERROR_FE = 0x04, /*!< frame error */
+ HAL_USART_ERROR_ORE = 0x08, /*!< Overrun error */
+ HAL_USART_ERROR_DMA = 0x10 /*!< DMA transfer error */
+}HAL_USART_ErrorTypeDef;
+
+/**
+ * @brief USART clock sources definitions
+ */
+typedef enum
+{
+ USART_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */
+ USART_CLOCKSOURCE_PCLK2 = 0x01, /*!< PCLK2 clock source */
+ USART_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */
+ USART_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */
+ USART_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */
+ USART_CLOCKSOURCE_UNDEFINED = 0x10 /*!< Undefined clock source */
+}USART_ClockSourceTypeDef;
+
+
+/**
+ * @brief USART handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /*!< USART registers base address */
+
+ USART_InitTypeDef Init; /*!< USART communication parameters */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to USART Tx transfer Buffer */
+
+ uint16_t TxXferSize; /*!< USART Tx Transfer size */
+
+ uint16_t TxXferCount; /*!< USART Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /*!< Pointer to USART Rx transfer Buffer */
+
+ uint16_t RxXferSize; /*!< USART Rx Transfer size */
+
+ uint16_t RxXferCount; /*!< USART Rx Transfer Counter */
+
+ uint16_t Mask; /*!< USART Rx RDR register mask */
+
+ DMA_HandleTypeDef *hdmatx; /*!< USART Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< USART Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ HAL_USART_StateTypeDef State; /*!< USART communication state */
+
+ HAL_USART_ErrorTypeDef ErrorCode; /*!< USART Error code */
+
+}USART_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup USART_Exported_Constants USART Exported Constants
+ * @{
+ */
+
+/** @defgroup USART_Stop_Bits USART Number of Stop Bits
+ * @{
+ */
+#define USART_STOPBITS_1 ((uint32_t)0x0000)
+#define USART_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0)
+#define USART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
+#define USART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
+#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_STOPBITS_1) || \
+ ((STOPBITS) == USART_STOPBITS_0_5) || \
+ ((STOPBITS) == USART_STOPBITS_1_5) || \
+ ((STOPBITS) == USART_STOPBITS_2))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Parity USART Parity
+ * @{
+ */
+#define USART_PARITY_NONE ((uint32_t)0x0000)
+#define USART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define USART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+#define IS_USART_PARITY(PARITY) (((PARITY) == USART_PARITY_NONE) || \
+ ((PARITY) == USART_PARITY_EVEN) || \
+ ((PARITY) == USART_PARITY_ODD))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Mode USART Mode
+ * @{
+ */
+#define USART_MODE_RX ((uint32_t)USART_CR1_RE)
+#define USART_MODE_TX ((uint32_t)USART_CR1_TE)
+#define USART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_USART_MODE(MODE) ((((MODE) & (uint32_t)0xFFFFFFF3) == 0x00) && ((MODE) != (uint32_t)0x00))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock USART Clock
+ * @{
+ */
+#define USART_CLOCK_DISABLED ((uint32_t)0x0000)
+#define USART_CLOCK_ENABLED ((uint32_t)USART_CR2_CLKEN)
+#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_CLOCK_DISABLED) || \
+ ((CLOCK) == USART_CLOCK_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Polarity USART Clock Polarity
+ * @{
+ */
+#define USART_POLARITY_LOW ((uint32_t)0x0000)
+#define USART_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL)
+#define IS_USART_POLARITY(CPOL) (((CPOL) == USART_POLARITY_LOW) || ((CPOL) == USART_POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Clock_Phase USART Clock Phase
+ * @{
+ */
+#define USART_PHASE_1EDGE ((uint32_t)0x0000)
+#define USART_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA)
+#define IS_USART_PHASE(CPHA) (((CPHA) == USART_PHASE_1EDGE) || ((CPHA) == USART_PHASE_2EDGE))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Last_Bit USART Last Bit
+ * @{
+ */
+#define USART_LASTBIT_DISABLE ((uint32_t)0x0000)
+#define USART_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL)
+#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LASTBIT_DISABLE) || \
+ ((LASTBIT) == USART_LASTBIT_ENABLE))
+/**
+ * @}
+ */
+
+
+/** @defgroup USART_Flags USART Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the ISR register
+ * @{
+ */
+#define USART_FLAG_REACK ((uint32_t)0x00400000)
+#define USART_FLAG_TEACK ((uint32_t)0x00200000)
+#define USART_FLAG_BUSY ((uint32_t)0x00010000)
+#define USART_FLAG_CTS ((uint32_t)0x00000400)
+#define USART_FLAG_CTSIF ((uint32_t)0x00000200)
+#define USART_FLAG_LBDF ((uint32_t)0x00000100)
+#define USART_FLAG_TXE ((uint32_t)0x00000080)
+#define USART_FLAG_TC ((uint32_t)0x00000040)
+#define USART_FLAG_RXNE ((uint32_t)0x00000020)
+#define USART_FLAG_IDLE ((uint32_t)0x00000010)
+#define USART_FLAG_ORE ((uint32_t)0x00000008)
+#define USART_FLAG_NE ((uint32_t)0x00000004)
+#define USART_FLAG_FE ((uint32_t)0x00000002)
+#define USART_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup USART_Interrupt_definition USART Interrupts Definition
+ * Elements values convention: 0000ZZZZ0XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ * @{
+ */
+
+#define USART_IT_PE ((uint16_t)0x0028)
+#define USART_IT_TXE ((uint16_t)0x0727)
+#define USART_IT_TC ((uint16_t)0x0626)
+#define USART_IT_RXNE ((uint16_t)0x0525)
+#define USART_IT_IDLE ((uint16_t)0x0424)
+#define USART_IT_ERR ((uint16_t)0x0060)
+
+#define USART_IT_ORE ((uint16_t)0x0300)
+#define USART_IT_NE ((uint16_t)0x0200)
+#define USART_IT_FE ((uint16_t)0x0100)
+/**
+ * @}
+ */
+
+/** @defgroup USART_IT_CLEAR_Flags USART Interruption Clear Flags
+ * @{
+ */
+#define USART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
+#define USART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
+#define USART_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
+#define USART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
+#define USART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */
+#define USART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
+#define USART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */
+/**
+ * @}
+ */
+
+/** @defgroup USART_Request_Parameters USART Request Parameters
+ * @{
+ */
+#define USART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
+#define USART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
+#define IS_USART_REQUEST_PARAMETER(PARAM) (((PARAM) == USART_RXDATA_FLUSH_REQUEST) || \
+ ((PARAM) == USART_TXDATA_FLUSH_REQUEST))
+/**
+ * @}
+ */
+
+/** @defgroup USART_Interruption_Mask USART interruptions flag mask
+ * @{
+ */
+#define USART_IT_MASK ((uint16_t)0x001F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported macros ------------------------------------------------------------*/
+
+/** @defgroup USART_Exported_Macros USART Exported Macros
+ * @{
+ */
+
+/** @brief Reset USART handle state
+ * @param __HANDLE__: USART handle.
+ * @retval None
+ */
+#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_USART_STATE_RESET)
+
+
+/** @brief Checks whether the specified USART flag is set or not.
+ * @param __HANDLE__: specifies the USART Handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg USART_FLAG_REACK: Receive enable ackowledge flag
+ * @arg USART_FLAG_TEACK: Transmit enable ackowledge flag
+ * @arg USART_FLAG_BUSY: Busy flag
+ * @arg USART_FLAG_CTS: CTS Change flag
+ * @arg USART_FLAG_TXE: Transmit data register empty flag
+ * @arg USART_FLAG_TC: Transmission Complete flag
+ * @arg USART_FLAG_RXNE: Receive data register not empty flag
+ * @arg USART_FLAG_IDLE: Idle Line detection flag
+ * @arg USART_FLAG_ORE: OverRun Error flag
+ * @arg USART_FLAG_NE: Noise Error flag
+ * @arg USART_FLAG_FE: Framing Error flag
+ * @arg USART_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_USART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+
+/** @brief Enables the specified USART interrupt.
+ * @param __HANDLE__: specifies the USART Handle
+ * @param __INTERRUPT__: specifies the USART interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_USART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))))
+
+/** @brief Disables the specified USART interrupt.
+ * @param __HANDLE__: specifies the USART Handle.
+ * @param __INTERRUPT__: specifies the USART interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_USART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))))
+
+
+/** @brief Checks whether the specified USART interrupt has occurred or not.
+ * @param __HANDLE__: specifies the USART Handle
+ * @param __IT__: specifies the USART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ORE: OverRun Error interrupt
+ * @arg USART_IT_NE: Noise Error interrupt
+ * @arg USART_IT_FE: Framing Error interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_USART_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08)))
+
+/** @brief Checks whether the specified USART interrupt source is enabled.
+ * @param __HANDLE__: specifies the USART Handle.
+ * @param __IT__: specifies the USART interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg USART_IT_TXE: Transmit Data Register empty interrupt
+ * @arg USART_IT_TC: Transmission complete interrupt
+ * @arg USART_IT_RXNE: Receive Data register not empty interrupt
+ * @arg USART_IT_IDLE: Idle line detection interrupt
+ * @arg USART_IT_ORE: OverRun Error interrupt
+ * @arg USART_IT_NE: Noise Error interrupt
+ * @arg USART_IT_FE: Framing Error interrupt
+ * @arg USART_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5) == 2)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << \
+ (((uint16_t)(__IT__)) & USART_IT_MASK)))
+
+
+/** @brief Clears the specified USART ISR flag, in setting the proper ICR register flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+ * to clear the corresponding interrupt
+ * This parameter can be one of the following values:
+ * @arg USART_CLEAR_PEF: Parity Error Clear Flag
+ * @arg USART_CLEAR_FEF: Framing Error Clear Flag
+ * @arg USART_CLEAR_NEF: Noise detected Clear Flag
+ * @arg USART_CLEAR_OREF: OverRun Error Clear Flag
+ * @arg USART_CLEAR_IDLEF: IDLE line detected Clear Flag
+ * @arg USART_CLEAR_TCF: Transmission Complete Clear Flag
+ * @arg USART_CLEAR_CTSF: CTS Interrupt Clear Flag
+ * @retval None
+ */
+#define __HAL_USART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
+
+/** @brief Set a specific USART request flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * @param __REQ__: specifies the request flag to set
+ * This parameter can be one of the following values:
+ * @arg USART_RXDATA_FLUSH_REQUEST: Receive Data flush Request
+ * @arg USART_TXDATA_FLUSH_REQUEST: Transmit data flush Request
+ *
+ * @retval None
+ */
+#define __HAL_USART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
+
+/** @brief Enable USART
+ * @param __HANDLE__: specifies the USART Handle.
+ * @retval None
+ */
+#define __HAL_USART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable USART
+ * @param __HANDLE__: specifies the USART Handle.
+ * @retval None
+ */
+#define __HAL_USART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+
+/** @brief Check USART Baud rate
+ * @param BAUDRATE: Baudrate specified by the user
+ * The maximum Baud Rate is derived from the maximum clock on F3 (i.e. 72 MHz)
+ * divided by the smallest oversampling used on the USART (i.e. 8)
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_USART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 9000001)
+
+/**
+ * @}
+ */
+
+/* Include USART HAL Extended module */
+#include "stm32f3xx_hal_usart_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup USART_Exported_Functions USART Exported Functions
+ * @{
+ */
+
+/** @addtogroup USART_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions
+ * @{
+ */
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspInit(USART_HandleTypeDef *husart);
+void HAL_USART_MspDeInit(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_CheckIdleState(USART_HandleTypeDef *husart);
+/**
+ * @}
+ */
+
+/** @defgroup USART_Exported_Functions_Group2 Input and Output operation functions
+ * @brief USART Transmit/Receive functions
+ * @{
+ */
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart);
+HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart);
+void HAL_USART_IRQHandler(USART_HandleTypeDef *husart);
+void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart);
+void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart);
+/**
+ * @}
+ */
+
+/** @defgroup USART_Exported_Functions_Group3 Peripheral Control functions
+ * @brief USART control functions
+ * @{
+ */
+/* Peripheral Control functions ***********************************************/
+
+/* Peripheral State and Error functions ***************************************/
+HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart);
+uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_USART_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_usart_ex.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,326 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_usart_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of USART HAL Extended module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_USART_EX_H
+#define __STM32F3xx_HAL_USART_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup USARTEx USART Extended HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup USARTEx_Exported_Constants USART Extended Exported Constants
+ * @{
+ */
+
+/** @defgroup USARTEx_Word_Length USART Extended Word Length
+ * @{
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F334x8) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define USART_WORDLENGTH_7B ((uint32_t)USART_CR1_M1)
+#define USART_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define USART_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
+#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WORDLENGTH_7B) || \
+ ((LENGTH) == USART_WORDLENGTH_8B) || \
+ ((LENGTH) == USART_WORDLENGTH_9B))
+#else
+#define USART_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define USART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WORDLENGTH_8B) || \
+ ((LENGTH) == USART_WORDLENGTH_9B))
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F334x8 || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+/**
+ * @}
+ */
+
+
+
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup USARTEx_Exported_Macros USART Extended Exported Macros
+ * @{
+ */
+
+
+/** @brief Reports the USART clock source.
+ * @param __HANDLE__: specifies the USART Handle
+ * @param __CLOCKSOURCE__ : output variable
+ * @retval the USART clocking source, written in __CLOCKSOURCE__.
+ */
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ } while(0)
+#else
+#define __HAL_USART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK2: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK2; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = USART_CLOCKSOURCE_LSE; \
+ break; \
+ } \
+ } \
+ } while(0)
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+/** @brief Computes the USART mask to apply to retrieve the received data
+ * according to the word length and to the parity bits activation.
+ * If PCE = 1, the parity bit is not included in the data extracted
+ * by the reception API().
+ * This masking operation is not carried out in the case of
+ * DMA transfers.
+ * @param __HANDLE__: specifies the USART Handle
+ * @retval none
+ */
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+ defined(STM32F334x8) || \
+ defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+#define __HAL_USART_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_7B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x003F ; \
+ } \
+ } \
+} while(0)
+#else
+#define __HAL_USART_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == USART_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == USART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ } \
+} while(0)
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+ /* STM32F334x8 || */
+ /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions ****************************/
+/* IO operation functions *****************************************************/
+/* Peripheral Control functions ***********************************************/
+/* Peripheral State and Error functions ***************************************/
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_USART_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_hal_wwdg.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,311 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_hal_wwdg.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of WWDG HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_WWDG_H
+#define __STM32F3xx_HAL_WWDG_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup WWDG
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/** @defgroup WWDG_Exported_Types WWDG Exported Types
+ * @{
+ */
+/**
+ * @brief WWDG HAL State Structure definition
+ */
+typedef enum
+{
+ HAL_WWDG_STATE_RESET = 0x00, /*!< WWDG not yet initialized or disabled */
+ HAL_WWDG_STATE_READY = 0x01, /*!< WWDG initialized and ready for use */
+ HAL_WWDG_STATE_BUSY = 0x02, /*!< WWDG internal process is ongoing */
+ HAL_WWDG_STATE_TIMEOUT = 0x03, /*!< WWDG timeout state */
+ HAL_WWDG_STATE_ERROR = 0x04 /*!< WWDG error state */
+
+}HAL_WWDG_StateTypeDef;
+
+/**
+ * @brief WWDG Init structure definition
+ */
+typedef struct
+{
+ uint32_t Prescaler; /*!< Specifies the prescaler value of the WWDG.
+ This parameter can be a value of @ref WWDG_Prescaler */
+
+ uint32_t Window; /*!< Specifies the WWDG window value to be compared to the downcounter.
+ This parameter must be a number lower than Max_Data = 0x80 */
+
+ uint32_t Counter; /*!< Specifies the WWDG free-running downcounter value.
+ This parameter must be a number between Min_Data = 0x40 and Max_Data = 0x7F */
+
+} WWDG_InitTypeDef;
+
+/**
+ * @brief WWDG Handle Structure definition
+ */
+typedef struct
+{
+ WWDG_TypeDef *Instance; /*!< Register base address */
+
+ WWDG_InitTypeDef Init; /*!< WWDG required parameters */
+
+ HAL_LockTypeDef Lock; /*!< WWDG Locking object */
+
+ __IO HAL_WWDG_StateTypeDef State; /*!< WWDG communication state */
+
+} WWDG_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup WWDG_Exported_Constants WWDG Exported Constants
+ * @{
+ */
+
+/** @defgroup WWDG_BitAddress_AliasRegion WWDG registers bit address in the alias region
+ * @brief WWDG registers bit address in the alias region
+ * @{
+ */
+
+/* --- CFR Register ---*/
+/* Alias word address of EWI bit */
+#define CFR_BASE (uint32_t)(WWDG_BASE + 0x04)
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Interrupt_definition WWDG Interrupt definition
+ * @brief WWDG registers bit address in the alias region
+ * @{
+ */
+#define WWDG_IT_EWI ((uint32_t)WWDG_CFR_EWI)
+
+#define IS_WWDG_IT(__IT__) ((__IT__) == WWDG_IT_EWI)
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Flag_definition WWDG Flag definition
+ * @brief WWDG Flag definition
+ * @{
+ */
+#define WWDG_FLAG_EWIF ((uint32_t)WWDG_SR_EWIF) /*!< Early Wakeup Interrupt Flag */
+
+#define IS_WWDG_FLAG(__FLAG__) ((__FLAG__) == WWDG_FLAG_EWIF))
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Prescaler WWDG Prescaler
+ * @{
+ */
+#define WWDG_PRESCALER_1 ((uint32_t)0x00000000) /*!< WWDG counter clock = (PCLK1/4096)/1 */
+#define WWDG_PRESCALER_2 ((uint32_t)WWDG_CFR_WDGTB0) /*!< WWDG counter clock = (PCLK1/4096)/2 */
+#define WWDG_PRESCALER_4 ((uint32_t)WWDG_CFR_WDGTB1) /*!< WWDG counter clock = (PCLK1/4096)/4 */
+#define WWDG_PRESCALER_8 ((uint32_t)WWDG_CFR_WDGTB) /*!< WWDG counter clock = (PCLK1/4096)/8 */
+
+#define IS_WWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == WWDG_PRESCALER_1) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_2) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_4) || \
+ ((__PRESCALER__) == WWDG_PRESCALER_8))
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Window WWDG Window
+ * @{
+ */
+#define IS_WWDG_WINDOW(__WINDOW__) ((__WINDOW__) <= 0x7F)
+
+/**
+ * @}
+ */
+
+/** @defgroup WWDG_Counter WWDG Counter
+ * @{
+ */
+#define IS_WWDG_COUNTER(__COUNTER__) (((__COUNTER__) >= 0x40) && ((__COUNTER__) <= 0x7F))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+
+/** @defgroup WWDG_Exported_Macros WWDG Exported Macros
+ * @{
+ */
+
+/** @brief Reset WWDG handle state
+ * @param __HANDLE__: WWDG handle.
+ * @retval None
+ */
+#define __HAL_WWDG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_WWDG_STATE_RESET)
+
+/**
+ * @brief Enable the WWDG peripheral.
+ * @param __HANDLE__: WWDG handle
+ * @retval None
+ */
+#define __HAL_WWDG_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, WWDG_CR_WDGA)
+
+/**
+ * @brief Get the selected WWDG's flag status.
+ * @param __HANDLE__: WWDG handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early Wakeup Interrupt flag
+ * @retval The new state of WWDG_FLAG (SET or RESET).
+ */
+#define __HAL_WWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear the WWDG's pending flags.
+ * @param __HANDLE__: WWDG handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early Wakeup Interrupt flag
+ * @retval None
+ */
+#define __HAL_WWDG_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__))
+
+/**
+ * @brief Enable the WWDG early wakeup interrupt.
+ * @note Once enabled this interrupt cannot be disabled except by a system reset.
+ * @retval None
+ */
+#define __HAL_WWDG_ENABLE_IT(__INTERRUPT__) (*(__IO uint32_t *) CFR_BASE |= (__INTERRUPT__))
+
+/** @brief Clear the WWDG's interrupt pending bits
+ * bits to clear the selected interrupt pending bits.
+ * @param __HANDLE__: WWDG handle
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one of the following values:
+ * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag
+ */
+#define __HAL_WWDG_CLEAR_IT(__HANDLE__, __INTERRUPT__) __HAL_WWDG_CLEAR_FLAG((__HANDLE__), (__INTERRUPT__))
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup WWDG_Exported_Functions WWDG Exported Functions
+ * @{
+ */
+
+/** @addtogroup WWDG_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @brief Initialization and Configuration functions.
+ * @{
+ */
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg);
+HAL_StatusTypeDef HAL_WWDG_DeInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_MspDeInit(WWDG_HandleTypeDef *hwwdg);
+void HAL_WWDG_WakeupCallback(WWDG_HandleTypeDef* hwwdg);
+/**
+ * @}
+ */
+
+/** @addtogroup WWDG_Exported_Functions_Group2 Input and Output operation functions
+ * @brief I/O operation functions
+ * @{
+ */
+/* I/O operation functions ******************************************************/
+HAL_StatusTypeDef HAL_WWDG_Start(WWDG_HandleTypeDef *hwwdg);
+HAL_StatusTypeDef HAL_WWDG_Start_IT(WWDG_HandleTypeDef *hwwdg);
+HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg, uint32_t Counter);
+void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg);
+/**
+ * @}
+ */
+
+/** @addtogroup WWDG_Exported_Functions_Group3 Peripheral State functions
+ * @brief Peripheral State functions.
+ * @{
+ */
+/* Peripheral State functions **************************************************/
+HAL_WWDG_StateTypeDef HAL_WWDG_GetState(WWDG_HandleTypeDef *hwwdg);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_WWDG_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/stm32f3xx_ll_fmc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,956 @@
+/**
+ ******************************************************************************
+ * @file stm32f3xx_ll_fmc.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 12-Sept-2014
+ * @brief Header file of FMC HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_LL_FMC_H
+#define __STM32F3xx_LL_FMC_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup FMC
+ * @{
+ */
+
+/* Exported typedef ----------------------------------------------------------*/
+#define FMC_NORSRAM_TypeDef FMC_Bank1_TypeDef
+#define FMC_NORSRAM_EXTENDED_TypeDef FMC_Bank1E_TypeDef
+#define FMC_NAND_TypeDef FMC_Bank2_3_TypeDef
+#define FMC_PCCARD_TypeDef FMC_Bank4_TypeDef
+
+#define FMC_NORSRAM_DEVICE FMC_Bank1
+#define FMC_NORSRAM_EXTENDED_DEVICE FMC_Bank1E
+#define FMC_NAND_DEVICE FMC_Bank2_3
+#define FMC_PCCARD_DEVICE FMC_Bank4
+
+/**
+ * @brief FMC_NORSRAM Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t NSBank; /*!< Specifies the NORSRAM memory device that will be used.
+ This parameter can be a value of @ref FMC_NORSRAM_Bank */
+
+ uint32_t DataAddressMux; /*!< Specifies whether the address and data values are
+ multiplexed on the data bus or not.
+ This parameter can be a value of @ref FMC_Data_Address_Bus_Multiplexing */
+
+ uint32_t MemoryType; /*!< Specifies the type of external memory attached to
+ the corresponding memory device.
+ This parameter can be a value of @ref FMC_Memory_Type */
+
+ uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be a value of @ref FMC_NORSRAM_Data_Width */
+
+ uint32_t BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory,
+ valid only with synchronous burst Flash memories.
+ This parameter can be a value of @ref FMC_Burst_Access_Mode */
+
+ uint32_t WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing
+ the Flash memory in burst mode.
+ This parameter can be a value of @ref FMC_Wait_Signal_Polarity */
+
+ uint32_t WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash
+ memory, valid only when accessing Flash memories in burst mode.
+ This parameter can be a value of @ref FMC_Wrap_Mode */
+
+ uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one
+ clock cycle before the wait state or during the wait state,
+ valid only when accessing memories in burst mode.
+ This parameter can be a value of @ref FMC_Wait_Timing */
+
+ uint32_t WriteOperation; /*!< Enables or disables the write operation in the selected device by the FMC.
+ This parameter can be a value of @ref FMC_Write_Operation */
+
+ uint32_t WaitSignal; /*!< Enables or disables the wait state insertion via wait
+ signal, valid for Flash memory access in burst mode.
+ This parameter can be a value of @ref FMC_Wait_Signal */
+
+ uint32_t ExtendedMode; /*!< Enables or disables the extended mode.
+ This parameter can be a value of @ref FMC_Extended_Mode */
+
+ uint32_t AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers,
+ valid only with asynchronous Flash memories.
+ This parameter can be a value of @ref FMC_AsynchronousWait */
+
+ uint32_t WriteBurst; /*!< Enables or disables the write burst operation.
+ This parameter can be a value of @ref FMC_Write_Burst */
+
+ uint32_t ContinuousClock; /*!< Enables or disables the FMC clock output to external memory devices.
+ This parameter is only enabled through the FMC_BCR1 register, and don't care
+ through FMC_BCR2..4 registers.
+ This parameter can be a value of @ref FMC_Continous_Clock */
+
+}FMC_NORSRAM_InitTypeDef;
+
+/**
+ * @brief FMC_NORSRAM Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t AddressSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address setup time.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+ @note This parameter is not used with synchronous NOR Flash memories. */
+
+ uint32_t AddressHoldTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the address hold time.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 15.
+ @note This parameter is not used with synchronous NOR Flash memories. */
+
+ uint32_t DataSetupTime; /*!< Defines the number of HCLK cycles to configure
+ the duration of the data setup time.
+ This parameter can be a value between Min_Data = 1 and Max_Data = 255.
+ @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed
+ NOR Flash memories. */
+
+ uint32_t BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure
+ the duration of the bus turnaround.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 15.
+ @note This parameter is only used for multiplexed NOR Flash memories. */
+
+ uint32_t CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of
+ HCLK cycles. This parameter can be a value between Min_Data = 2 and Max_Data = 16.
+ @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM
+ accesses. */
+
+ uint32_t DataLatency; /*!< Defines the number of memory clock cycles to issue
+ to the memory before getting the first data.
+ The parameter value depends on the memory type as shown below:
+ - It must be set to 0 in case of a CRAM
+ - It is don't care in asynchronous NOR, SRAM or ROM accesses
+ - It may assume a value between Min_Data = 2 and Max_Data = 17 in NOR Flash memories
+ with synchronous burst mode enable */
+
+ uint32_t AccessMode; /*!< Specifies the asynchronous access mode.
+ This parameter can be a value of @ref FMC_Access_Mode */
+
+}FMC_NORSRAM_TimingTypeDef;
+
+/**
+ * @brief FMC_NAND Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t NandBank; /*!< Specifies the NAND memory device that will be used.
+ This parameter can be a value of @ref FMC_NAND_Bank */
+
+ uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory device.
+ This parameter can be any value of @ref FMC_Wait_feature */
+
+ uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
+ This parameter can be any value of @ref FMC_NAND_Data_Width */
+
+ uint32_t EccComputation; /*!< Enables or disables the ECC computation.
+ This parameter can be any value of @ref FMC_ECC */
+
+ uint32_t ECCPageSize; /*!< Defines the page size for the extended ECC.
+ This parameter can be any value of @ref FMC_ECC_Page_Size */
+
+ uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+}FMC_NAND_InitTypeDef;
+
+/**
+ * @brief FMC_NAND_PCCARD Timing parameters structure definition
+ */
+typedef struct
+{
+ uint32_t SetupTime; /*!< Defines the number of HCLK cycles to setup address before
+ the command assertion for NAND-Flash read or write access
+ to common/Attribute or I/O memory space (depending on
+ the memory space timing to be configured).
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the
+ command for NAND-Flash read or write access to
+ common/Attribute or I/O memory space (depending on the
+ memory space timing to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address
+ (and data for write access) after the command de-assertion
+ for NAND-Flash read or write access to common/Attribute
+ or I/O memory space (depending on the memory space timing
+ to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the
+ data bus is kept in HiZ after the start of a NAND-Flash
+ write access to common/Attribute or I/O memory space (depending
+ on the memory space timing to be configured).
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+}FMC_NAND_PCC_TimingTypeDef;
+
+/**
+ * @brief FMC_NAND Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the PCCARD Memory device.
+ This parameter can be any value of @ref FMC_Wait_feature */
+
+ uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between CLE low and RE low.
+ This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
+
+ uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
+ delay between ALE low and RE low.
+ This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
+
+}FMC_PCCARD_InitTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup FMC_NOR_SRAM_Controller
+ * @{
+ */
+
+/** @defgroup FMC_NORSRAM_Bank
+ * @{
+ */
+#define FMC_NORSRAM_BANK1 ((uint32_t)0x00000000)
+#define FMC_NORSRAM_BANK2 ((uint32_t)0x00000002)
+#define FMC_NORSRAM_BANK3 ((uint32_t)0x00000004)
+#define FMC_NORSRAM_BANK4 ((uint32_t)0x00000006)
+
+#define IS_FMC_NORSRAM_BANK(BANK) (((BANK) == FMC_NORSRAM_BANK1) || \
+ ((BANK) == FMC_NORSRAM_BANK2) || \
+ ((BANK) == FMC_NORSRAM_BANK3) || \
+ ((BANK) == FMC_NORSRAM_BANK4))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Data_Address_Bus_Multiplexing
+ * @{
+ */
+#define FMC_DATA_ADDRESS_MUX_DISABLE ((uint32_t)0x00000000)
+#define FMC_DATA_ADDRESS_MUX_ENABLE ((uint32_t)0x00000002)
+
+#define IS_FMC_MUX(MUX) (((MUX) == FMC_DATA_ADDRESS_MUX_DISABLE) || \
+ ((MUX) == FMC_DATA_ADDRESS_MUX_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Memory_Type
+ * @{
+ */
+#define FMC_MEMORY_TYPE_SRAM ((uint32_t)0x00000000)
+#define FMC_MEMORY_TYPE_PSRAM ((uint32_t)0x00000004)
+#define FMC_MEMORY_TYPE_NOR ((uint32_t)0x00000008)
+
+#define IS_FMC_MEMORY(MEMORY) (((MEMORY) == FMC_MEMORY_TYPE_SRAM) || \
+ ((MEMORY) == FMC_MEMORY_TYPE_PSRAM)|| \
+ ((MEMORY) == FMC_MEMORY_TYPE_NOR))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NORSRAM_Data_Width
+ * @{
+ */
+#define FMC_NORSRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000)
+#define FMC_NORSRAM_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010)
+#define FMC_NORSRAM_MEM_BUS_WIDTH_32 ((uint32_t)0x00000020)
+
+#define IS_FMC_NORSRAM_MEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_NORSRAM_MEM_BUS_WIDTH_8) || \
+ ((WIDTH) == FMC_NORSRAM_MEM_BUS_WIDTH_16) || \
+ ((WIDTH) == FMC_NORSRAM_MEM_BUS_WIDTH_32))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NORSRAM_Flash_Access
+ * @{
+ */
+#define FMC_NORSRAM_FLASH_ACCESS_ENABLE ((uint32_t)0x00000040)
+#define FMC_NORSRAM_FLASH_ACCESS_DISABLE ((uint32_t)0x00000000)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Burst_Access_Mode
+ * @{
+ */
+#define FMC_BURST_ACCESS_MODE_DISABLE ((uint32_t)0x00000000)
+#define FMC_BURST_ACCESS_MODE_ENABLE ((uint32_t)0x00000100)
+
+#define IS_FMC_BURSTMODE(STATE) (((STATE) == FMC_BURST_ACCESS_MODE_DISABLE) || \
+ ((STATE) == FMC_BURST_ACCESS_MODE_ENABLE))
+/**
+ * @}
+ */
+
+
+/** @defgroup FMC_Wait_Signal_Polarity
+ * @{
+ */
+#define FMC_WAIT_SIGNAL_POLARITY_LOW ((uint32_t)0x00000000)
+#define FMC_WAIT_SIGNAL_POLARITY_HIGH ((uint32_t)0x00000200)
+
+#define IS_FMC_WAIT_POLARITY(POLARITY) (((POLARITY) == FMC_WAIT_SIGNAL_POLARITY_LOW) || \
+ ((POLARITY) == FMC_WAIT_SIGNAL_POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wrap_Mode
+ * @{
+ */
+#define FMC_WRAP_MODE_DISABLE ((uint32_t)0x00000000)
+#define FMC_WRAP_MODE_ENABLE ((uint32_t)0x00000400)
+
+#define IS_FMC_WRAP_MODE(MODE) (((MODE) == FMC_WRAP_MODE_DISABLE) || \
+ ((MODE) == FMC_WRAP_MODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_Timing
+ * @{
+ */
+#define FMC_WAIT_TIMING_BEFORE_WS ((uint32_t)0x00000000)
+#define FMC_WAIT_TIMING_DURING_WS ((uint32_t)0x00000800)
+
+#define IS_FMC_WAIT_SIGNAL_ACTIVE(ACTIVE) (((ACTIVE) == FMC_WAIT_TIMING_BEFORE_WS) || \
+ ((ACTIVE) == FMC_WAIT_TIMING_DURING_WS))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Write_Operation
+ * @{
+ */
+#define FMC_WRITE_OPERATION_DISABLE ((uint32_t)0x00000000)
+#define FMC_WRITE_OPERATION_ENABLE ((uint32_t)0x00001000)
+
+#define IS_FMC_WRITE_OPERATION(OPERATION) (((OPERATION) == FMC_WRITE_OPERATION_DISABLE) || \
+ ((OPERATION) == FMC_WRITE_OPERATION_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_Signal
+ * @{
+ */
+#define FMC_WAIT_SIGNAL_DISABLE ((uint32_t)0x00000000)
+#define FMC_WAIT_SIGNAL_ENABLE ((uint32_t)0x00002000)
+
+#define IS_FMC_WAITE_SIGNAL(SIGNAL) (((SIGNAL) == FMC_WAIT_SIGNAL_DISABLE) || \
+ ((SIGNAL) == FMC_WAIT_SIGNAL_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Extended_Mode
+ * @{
+ */
+#define FMC_EXTENDED_MODE_DISABLE ((uint32_t)0x00000000)
+#define FMC_EXTENDED_MODE_ENABLE ((uint32_t)0x00004000)
+
+#define IS_FMC_EXTENDED_MODE(MODE) (((MODE) == FMC_EXTENDED_MODE_DISABLE) || \
+ ((MODE) == FMC_EXTENDED_MODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_AsynchronousWait
+ * @{
+ */
+#define FMC_ASYNCHRONOUS_WAIT_DISABLE ((uint32_t)0x00000000)
+#define FMC_ASYNCHRONOUS_WAIT_ENABLE ((uint32_t)0x00008000)
+
+#define IS_FMC_ASYNWAIT(STATE) (((STATE) == FMC_ASYNCHRONOUS_WAIT_DISABLE) || \
+ ((STATE) == FMC_ASYNCHRONOUS_WAIT_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Write_Burst
+ * @{
+ */
+#define FMC_WRITE_BURST_DISABLE ((uint32_t)0x00000000)
+#define FMC_WRITE_BURST_ENABLE ((uint32_t)0x00080000)
+
+#define IS_FMC_WRITE_BURST(BURST) (((BURST) == FMC_WRITE_BURST_DISABLE) || \
+ ((BURST) == FMC_WRITE_BURST_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Continous_Clock
+ * @{
+ */
+#define FMC_CONTINUOUS_CLOCK_SYNC_ONLY ((uint32_t)0x00000000)
+#define FMC_CONTINUOUS_CLOCK_SYNC_ASYNC ((uint32_t)0x00100000)
+
+#define IS_FMC_CONTINOUS_CLOCK(CCLOCK) (((CCLOCK) == FMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \
+ ((CCLOCK) == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Address_Setup_Time
+ * @{
+ */
+#define IS_FMC_ADDRESS_SETUP_TIME(TIME) ((TIME) <= 15)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Address_Hold_Time
+ * @{
+ */
+#define IS_FMC_ADDRESS_HOLD_TIME(TIME) (((TIME) > 0) && ((TIME) <= 15))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Data_Setup_Time
+ * @{
+ */
+#define IS_FMC_DATASETUP_TIME(TIME) (((TIME) > 0) && ((TIME) <= 255))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Bus_Turn_around_Duration
+ * @{
+ */
+#define IS_FMC_TURNAROUND_TIME(TIME) ((TIME) <= 15)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_CLK_Division
+ * @{
+ */
+#define IS_FMC_CLK_DIV(DIV) (((DIV) > 1) && ((DIV) <= 16))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Data_Latency
+ * @{
+ */
+#define IS_FMC_DATA_LATENCY(LATENCY) (((LATENCY) > 1) && ((LATENCY) <= 17))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Access_Mode
+ * @{
+ */
+#define FMC_ACCESS_MODE_A ((uint32_t)0x00000000)
+#define FMC_ACCESS_MODE_B ((uint32_t)0x10000000)
+#define FMC_ACCESS_MODE_C ((uint32_t)0x20000000)
+#define FMC_ACCESS_MODE_D ((uint32_t)0x30000000)
+
+#define IS_FMC_ACCESS_MODE(MODE) (((MODE) == FMC_ACCESS_MODE_A) || \
+ ((MODE) == FMC_ACCESS_MODE_B) || \
+ ((MODE) == FMC_ACCESS_MODE_C) || \
+ ((MODE) == FMC_ACCESS_MODE_D))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NAND_Controller
+ * @{
+ */
+
+/** @defgroup FMC_NAND_Bank
+ * @{
+ */
+#define FMC_NAND_BANK2 ((uint32_t)0x00000010)
+#define FMC_NAND_BANK3 ((uint32_t)0x00000100)
+
+#define IS_FMC_NAND_BANK(BANK) (((BANK) == FMC_NAND_BANK2) || \
+ ((BANK) == FMC_NAND_BANK3))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_feature
+ * @{
+ */
+#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE ((uint32_t)0x00000000)
+#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE ((uint32_t)0x00000002)
+
+#define IS_FMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FMC_NAND_PCC_WAIT_FEATURE_DISABLE) || \
+ ((FEATURE) == FMC_NAND_PCC_WAIT_FEATURE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_PCR_Memory_Type
+ * @{
+ */
+#define FMC_PCR_MEMORY_TYPE_PCCARD ((uint32_t)0x00000000)
+#define FMC_PCR_MEMORY_TYPE_NAND ((uint32_t)0x00000008)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NAND_Data_Width
+ * @{
+ */
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000)
+#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010)
+
+#define IS_FMC_NAND_MEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_NAND_PCC_MEM_BUS_WIDTH_8) || \
+ ((WIDTH) == FMC_NAND_PCC_MEM_BUS_WIDTH_16))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_ECC
+ * @{
+ */
+#define FMC_NAND_ECC_DISABLE ((uint32_t)0x00000000)
+#define FMC_NAND_ECC_ENABLE ((uint32_t)0x00000040)
+
+#define IS_FMC_ECC_STATE(STATE) (((STATE) == FMC_NAND_ECC_DISABLE) || \
+ ((STATE) == FMC_NAND_ECC_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_ECC_Page_Size
+ * @{
+ */
+#define FMC_NAND_ECC_PAGE_SIZE_256BYTE ((uint32_t)0x00000000)
+#define FMC_NAND_ECC_PAGE_SIZE_512BYTE ((uint32_t)0x00020000)
+#define FMC_NAND_ECC_PAGE_SIZE_1024BYTE ((uint32_t)0x00040000)
+#define FMC_NAND_ECC_PAGE_SIZE_2048BYTE ((uint32_t)0x00060000)
+#define FMC_NAND_ECC_PAGE_SIZE_4096BYTE ((uint32_t)0x00080000)
+#define FMC_NAND_ECC_PAGE_SIZE_8192BYTE ((uint32_t)0x000A0000)
+
+#define IS_FMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FMC_NAND_ECC_PAGE_SIZE_256BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_512BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \
+ ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_8192BYTE))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_TCLR_Setup_Time
+ * @{
+ */
+#define IS_FMC_TCLR_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_TAR_Setup_Time
+ * @{
+ */
+#define IS_FMC_TAR_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Setup_Time
+ * @{
+ */
+#define IS_FMC_SETUP_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Wait_Setup_Time
+ * @{
+ */
+#define IS_FMC_WAIT_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Hold_Setup_Time
+ * @{
+ */
+#define IS_FMC_HOLD_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_HiZ_Setup_Time
+ * @{
+ */
+#define IS_FMC_HIZ_TIME(TIME) ((TIME) <= 255)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NORSRAM_Device_Instance
+ * @{
+ */
+#define IS_FMC_NORSRAM_DEVICE(INSTANCE) ((INSTANCE) == FMC_NORSRAM_DEVICE)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NORSRAM_EXTENDED_Device_Instance
+ * @{
+ */
+#define IS_FMC_NORSRAM_EXTENDED_DEVICE(INSTANCE) ((INSTANCE) == FMC_NORSRAM_EXTENDED_DEVICE)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NAND_Device_Instance
+ * @{
+ */
+#define IS_FMC_NAND_DEVICE(INSTANCE) ((INSTANCE) == FMC_NAND_DEVICE)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_PCCARD_Device_Instance
+ * @{
+ */
+#define IS_FMC_PCCARD_DEVICE(INSTANCE) ((INSTANCE) == FMC_PCCARD_DEVICE)
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Interrupt_definition
+ * @brief FMC Interrupt definition
+ * @{
+ */
+#define FMC_IT_RISING_EDGE ((uint32_t)0x00000008)
+#define FMC_IT_LEVEL ((uint32_t)0x00000010)
+#define FMC_IT_FALLING_EDGE ((uint32_t)0x00000020)
+#define FMC_IT_REFRESH_ERROR ((uint32_t)0x00004000)
+
+#define IS_FMC_IT(IT) ((((IT) & (uint32_t)0xFFFFBFC7) == 0x00000000) && ((IT) != 0x00000000))
+
+#define IS_FMC_GET_IT(IT) (((IT) == FMC_IT_RISING_EDGE) || \
+ ((IT) == FMC_IT_LEVEL) || \
+ ((IT) == FMC_IT_FALLING_EDGE) || \
+ ((IT) == FMC_IT_REFRESH_ERROR))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Flag_definition
+ * @brief FMC Flag definition
+ * @{
+ */
+#define FMC_FLAG_RISING_EDGE ((uint32_t)0x00000001)
+#define FMC_FLAG_LEVEL ((uint32_t)0x00000002)
+#define FMC_FLAG_FALLING_EDGE ((uint32_t)0x00000004)
+#define FMC_FLAG_FEMPT ((uint32_t)0x00000040)
+
+#define IS_FMC_GET_FLAG(FLAG) (((FLAG) == FMC_FLAG_RISING_EDGE) || \
+ ((FLAG) == FMC_FLAG_LEVEL) || \
+ ((FLAG) == FMC_FLAG_FALLING_EDGE) || \
+ ((FLAG) == FMC_FLAG_FEMPT))
+
+#define IS_FMC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFF8) == 0x00000000) && ((FLAG) != 0x00000000))
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup FMC_NOR_Macros
+ * @brief macros to handle NOR device enable/disable and read/write operations
+ * @{
+ */
+
+/**
+ * @brief Enable the NORSRAM device access.
+ * @param __INSTANCE__: FMC_NORSRAM Instance
+ * @param __BANK__: FMC_NORSRAM Bank
+ * @retval None
+ */
+#define __FMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] |= FMC_BCR1_MBKEN)
+
+/**
+ * @brief Disable the NORSRAM device access.
+ * @param __INSTANCE__: FMC_NORSRAM Instance
+ * @param __BANK__: FMC_NORSRAM Bank
+ * @retval None
+ */
+#define __FMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] &= ~FMC_BCR1_MBKEN)
+
+/**
+ * @}
+ */
+
+/** @defgroup FMC_NAND_Macros
+ * @brief macros to handle NAND device enable/disable
+ * @{
+ */
+
+/**
+ * @brief Enable the NAND device access.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @retval None
+ */
+#define __FMC_NAND_ENABLE(__INSTANCE__, __BANK__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 |= FMC_PCR2_PBKEN): \
+ ((__INSTANCE__)->PCR3 |= FMC_PCR3_PBKEN))
+
+/**
+ * @brief Disable the NAND device access.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @retval None
+ */
+#define __FMC_NAND_DISABLE(__INSTANCE__, __BANK__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 &= ~FMC_PCR2_PBKEN): \
+ ((__INSTANCE__)->PCR3 &= ~FMC_PCR3_PBKEN))
+/**
+ * @}
+ */
+
+/** @defgroup FMC_PCCARD_Macros
+ * @brief macros to handle SRAM read/write operations
+ * @{
+ */
+
+/**
+ * @brief Enable the PCCARD device access.
+ * @param __INSTANCE__: FMC_PCCARD Instance
+ * @retval None
+ */
+#define __FMC_PCCARD_ENABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 |= FMC_PCR4_PBKEN)
+
+/**
+ * @brief Disable the PCCARD device access.
+ * @param __INSTANCE__: FMC_PCCARD Instance
+ * @retval None
+ */
+#define __FMC_PCCARD_DISABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 &= ~FMC_PCR4_PBKEN)
+/**
+ * @}
+ */
+
+/** @defgroup FMC_Interrupt
+ * @brief macros to handle FMC interrupts
+ * @{
+ */
+
+/**
+ * @brief Enable the NAND device interrupt.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __INTERRUPT__: FMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 |= (__INTERRUPT__)): \
+ ((__INSTANCE__)->SR3 |= (__INTERRUPT__)))
+
+/**
+ * @brief Disable the NAND device interrupt.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __INTERRUPT__: FMC_NAND interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__INTERRUPT__)): \
+ ((__INSTANCE__)->SR3 &= ~(__INTERRUPT__)))
+
+/**
+ * @brief Get flag status of the NAND device.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __FLAG__: FMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FMC_NAND_BANK2)? (((__INSTANCE__)->SR2 &(__FLAG__)) == (__FLAG__)): \
+ (((__INSTANCE__)->SR3 &(__FLAG__)) == (__FLAG__)))
+/**
+ * @brief Clear flag status of the NAND device.
+ * @param __INSTANCE__: FMC_NAND Instance
+ * @param __BANK__: FMC_NAND Bank
+ * @param __FLAG__: FMC_NAND flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval None
+ */
+#define __FMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__FLAG__)): \
+ ((__INSTANCE__)->SR3 &= ~(__FLAG__)))
+/**
+ * @brief Enable the PCCARD device interrupt.
+ * @param __INSTANCE__: FMC_PCCARD Instance
+ * @param __INTERRUPT__: FMC_PCCARD interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_PCCARD_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 |= (__INTERRUPT__))
+
+/**
+ * @brief Disable the PCCARD device interrupt.
+ * @param __INSTANCE__: FMC_PCCARD Instance
+ * @param __INTERRUPT__: FMC_PCCARD interrupt
+ * This parameter can be any combination of the following values:
+ * @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
+ * @arg FMC_IT_LEVEL: Interrupt level.
+ * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
+ * @retval None
+ */
+#define __FMC_PCCARD_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 &= ~(__INTERRUPT__))
+
+/**
+ * @brief Get flag status of the PCCARD device.
+ * @param __INSTANCE__: FMC_PCCARD Instance
+ * @param __FLAG__: FMC_PCCARD flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval The state of FLAG (SET or RESET).
+ */
+#define __FMC_PCCARD_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SR4 &(__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clear flag status of the PCCARD device.
+ * @param __INSTANCE__: FMC_PCCARD Instance
+ * @param __FLAG__: FMC_PCCARD flag
+ * This parameter can be any combination of the following values:
+ * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
+ * @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
+ * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
+ * @arg FMC_FLAG_FEMPT: FIFO empty flag.
+ * @retval None
+ */
+#define __FMC_PCCARD_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SR4 &= ~(__FLAG__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+
+/* FMC_NORSRAM Controller functions *******************************************/
+/* Initialization/de-initialization functions */
+HAL_StatusTypeDef FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode);
+HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank);
+
+/* FMC_NORSRAM Control functions */
+HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank);
+
+/* FMC_NAND Controller functions **********************************************/
+/* Initialization/de-initialization functions */
+HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank);
+
+/* FMC_NAND Control functions */
+HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank);
+HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout);
+
+/* FMC_PCCARD Controller functions ********************************************/
+/* Initialization/de-initialization functions */
+HAL_StatusTypeDef FMC_PCCARD_Init(FMC_PCCARD_TypeDef *Device, FMC_PCCARD_InitTypeDef *Init);
+HAL_StatusTypeDef FMC_PCCARD_CommonSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FMC_PCCARD_AttributeSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FMC_PCCARD_IOSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing);
+HAL_StatusTypeDef FMC_PCCARD_DeInit(FMC_PCCARD_TypeDef *Device);
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_LL_FMC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/system_stm32f3xx.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,124 @@
+/**
+ ******************************************************************************
+ * @file system_stm32f3xx.h
+ * @author MCD Application Team
+ * @version V2.1.0
+ * @date 12-Sept-2014
+ * @brief CMSIS Cortex-M4 Device System Source File for STM32F3xx devices.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32f3xx_system
+ * @{
+ */
+
+/**
+ * @brief Define to prevent recursive inclusion
+ */
+#ifndef __SYSTEM_STM32F3XX_H
+#define __SYSTEM_STM32F3XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** @addtogroup STM32F3xx_System_Includes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @addtogroup STM32F3xx_System_Exported_types
+ * @{
+ */
+ /* This variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 3) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) by calling HAL API function HAL_RCC_ClockConfig()
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+ */
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Exported_Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32F3xx_System_Exported_Functions
+ * @{
+ */
+
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+extern void SetSysClock(void);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F3XX_H */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_F334R8/TARGET_STM/TARGET_NUCLEO_F334R8/PeripheralPins.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,66 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_PERIPHERALPINS_H +#define MBED_PERIPHERALPINS_H + +#include "pinmap.h" +#include "PeripheralNames.h" + +//*** ADC *** + +extern const PinMap PinMap_ADC[]; + +//*** DAC *** + +extern const PinMap PinMap_DAC[]; + +//*** I2C *** + +extern const PinMap PinMap_I2C_SDA[]; +extern const PinMap PinMap_I2C_SCL[]; + +//*** PWM *** + +extern const PinMap PinMap_PWM[]; + +//*** SERIAL *** + +extern const PinMap PinMap_UART_TX[]; +extern const PinMap PinMap_UART_RX[]; + +//*** SPI *** + +extern const PinMap PinMap_SPI_MOSI[]; +extern const PinMap PinMap_SPI_MISO[]; +extern const PinMap PinMap_SPI_SCLK[]; +extern const PinMap PinMap_SPI_SSEL[]; + +#endif
--- a/TARGET_NUCLEO_F334R8/TARGET_STM/TARGET_NUCLEO_F334R8/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F334R8/TARGET_STM/TARGET_NUCLEO_F334R8/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -64,6 +64,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/startup_stm32f334x8.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_hrtim.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_sdadc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/stm32f3xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_MICRO/system_stm32f3xx.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/startup_stm32f334x8.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_hrtim.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_sdadc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/stm32f3xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_ARM_STD/system_stm32f3xx.o has changed
--- a/TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/NUCLEO_F334R8.ld Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,151 +0,0 @@
-/* Linker script for STM32F407 */
-
-/* Linker script to configure memory regions. */
-MEMORY
-{
- FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 0x10000
- RAM (xrw) : ORIGIN = 0x20000188, LENGTH = 0x3000 - 0x0188
-/* CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 0x1000 */
-}
-
-/* Linker script to place sections and symbol values. Should be used together
- * with other linker script that defines memory regions FLASH and RAM.
- * It references following symbols, which must be defined in code:
- * Reset_Handler : Entry of reset handler
- *
- * It defines following symbols, which code can use without definition:
- * __exidx_start
- * __exidx_end
- * __etext
- * __data_start__
- * __preinit_array_start
- * __preinit_array_end
- * __init_array_start
- * __init_array_end
- * __fini_array_start
- * __fini_array_end
- * __data_end__
- * __bss_start__
- * __bss_end__
- * __end__
- * end
- * __HeapLimit
- * __StackLimit
- * __StackTop
- * __stack
- */
-ENTRY(Reset_Handler)
-
-SECTIONS
-{
- .text :
- {
- KEEP(*(.isr_vector))
- *(.text*)
-
- KEEP(*(.init))
- KEEP(*(.fini))
-
- /* .ctors */
- *crtbegin.o(.ctors)
- *crtbegin?.o(.ctors)
- *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
- *(SORT(.ctors.*))
- *(.ctors)
-
- /* .dtors */
- *crtbegin.o(.dtors)
- *crtbegin?.o(.dtors)
- *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
- *(SORT(.dtors.*))
- *(.dtors)
-
- *(.rodata*)
-
- KEEP(*(.eh_frame*))
- } > FLASH
-
- .ARM.extab :
- {
- *(.ARM.extab* .gnu.linkonce.armextab.*)
- } > FLASH
-
- __exidx_start = .;
- .ARM.exidx :
- {
- *(.ARM.exidx* .gnu.linkonce.armexidx.*)
- } > FLASH
- __exidx_end = .;
-
- __etext = .;
-
- .data : AT (__etext)
- {
- __data_start__ = .;
- *(vtable)
- *(.data*)
-
- . = ALIGN(4);
- /* preinit data */
- PROVIDE_HIDDEN (__preinit_array_start = .);
- KEEP(*(.preinit_array))
- PROVIDE_HIDDEN (__preinit_array_end = .);
-
- . = ALIGN(4);
- /* init data */
- PROVIDE_HIDDEN (__init_array_start = .);
- KEEP(*(SORT(.init_array.*)))
- KEEP(*(.init_array))
- PROVIDE_HIDDEN (__init_array_end = .);
-
-
- . = ALIGN(4);
- /* finit data */
- PROVIDE_HIDDEN (__fini_array_start = .);
- KEEP(*(SORT(.fini_array.*)))
- KEEP(*(.fini_array))
- PROVIDE_HIDDEN (__fini_array_end = .);
-
- KEEP(*(.jcr*))
- . = ALIGN(4);
- /* All data end */
- __data_end__ = .;
-
- } > RAM
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start__ = .;
- *(.bss*)
- *(COMMON)
- . = ALIGN(4);
- __bss_end__ = .;
- } > RAM
-
- .heap (COPY):
- {
- __end__ = .;
- end = __end__;
- *(.heap*)
- __HeapLimit = .;
- } > RAM
-
- /* .stack_dummy section doesn't contains any symbols. It is only
- * used for linker to calculate size of stack sections, and assign
- * values to stack symbols later */
- .stack_dummy (COPY):
- {
- *(.stack*)
- } > RAM
-
- /* Set stack top to end of RAM, and stack limit move down by
- * size of stack_dummy section */
- __StackTop = ORIGIN(RAM) + LENGTH(RAM);
- __StackLimit = __StackTop - SIZEOF(.stack_dummy);
- PROVIDE(__stack = __StackTop);
-
- /* Check if data + heap + stack exceeds RAM limit */
- ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
-}
-
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/STM32F334x8.ld Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,154 @@
+/* Linker script to configure memory regions. */
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64K
+ CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 4K
+ RAM (xrw) : ORIGIN = 0x20000188, LENGTH = 12K - 0x0188
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ * _estack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.isr_vector))
+ *(.text*)
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+ _sidata = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ _sdata = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ KEEP(*(.jcr*))
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+ _edata = .;
+
+ } > RAM
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start__ = .;
+ _sbss = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ _ebss = .;
+ } > RAM
+
+ .heap (COPY):
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy (COPY):
+ {
+ *(.stack*)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ _estack = __StackTop;
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/hal_tick.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/startup_stm32f334x8.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_hrtim.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_sdadc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/stm32f3xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_GCC_ARM/system_stm32f3xx.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/startup_stm32f334x8.o has changed
--- a/TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f334x8.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f334x8.icf Tue Feb 03 15:31:20 2015 +0000
@@ -5,9 +5,9 @@
/* [RAM = 16kb = 0x4000] Vector table dynamic copy: 98 vectors = 392 bytes (0x188) to be reserved in RAM */
define symbol __NVIC_start__ = 0x20000000;
-define symbol __NVIC_end__ = 0x20000191; /* Add 4 more bytes to be aligned on 8 bytes */
-define symbol __region_RAM_start__ = 0x20000192;
-define symbol __region_RAM_end__ = 0x20003FFF;
+define symbol __NVIC_end__ = 0x20000187; /*aligned on 8 bytes */
+define symbol __region_RAM_start__ = 0x20000188;
+define symbol __region_RAM_end__ = 0x20002FFF;
define symbol __region_CCMRAM_start__ = 0x10000000;
define symbol __region_CCMRAM_end__ = 0x10000FFF;
@@ -18,8 +18,8 @@
define region CCMRAM_region = mem:[from __region_CCMRAM_start__ to __region_CCMRAM_end__];
/* Stack and Heap */
-define symbol __size_cstack__ = 0x400;
-define symbol __size_heap__ = 0x400;
+define symbol __size_cstack__ = 0x800;
+define symbol __size_heap__ = 0x1000;
define block CSTACK with alignment = 8, size = __size_cstack__ { };
define block HEAP with alignment = 8, size = __size_heap__ { };
define block STACKHEAP with fixed order { block HEAP, block CSTACK };
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_cec.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_hrtim.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_sdadc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/stm32f3xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F334R8/TOOLCHAIN_IAR/system_stm32f3xx.o has changed
--- a/TARGET_NUCLEO_F401RE/TARGET_STM/TARGET_NUCLEO_F401RE/PeripheralNames.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,80 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_6 = (int)USART6_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_9 = (int)TIM9_BASE,
- PWM_10 = (int)TIM10_BASE,
- PWM_11 = (int)TIM11_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/TARGET_NUCLEO_F401RE/TARGET_STM/TARGET_NUCLEO_F401RE/PeripheralPins.h Thu Nov 27 13:33:22 2014 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,62 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ - -#ifndef MBED_PERIPHERALPINS_H -#define MBED_PERIPHERALPINS_H - -#include "pinmap.h" -#include "PeripheralNames.h" - -//*** ADC *** - -extern const PinMap PinMap_ADC[]; - -//*** I2C *** - -extern const PinMap PinMap_I2C_SDA[]; -extern const PinMap PinMap_I2C_SCL[]; - -//*** PWM *** - -extern const PinMap PinMap_PWM[]; - -//*** SERIAL *** - -extern const PinMap PinMap_UART_TX[]; -extern const PinMap PinMap_UART_RX[]; - -//*** SPI *** - -extern const PinMap PinMap_SPI_MOSI[]; -extern const PinMap PinMap_SPI_MISO[]; -extern const PinMap PinMap_SPI_SCLK[]; -extern const PinMap PinMap_SPI_SSEL[]; - -#endif
--- a/TARGET_NUCLEO_F401RE/TARGET_STM/TARGET_NUCLEO_F401RE/PinNames.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,182 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PH_0 = 0x70,
- PH_1 = 0x71,
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = PA_5,
- LED2 = PA_5,
- LED3 = PA_5,
- LED4 = PA_5,
- USER_BUTTON = PC_13,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_3,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/TARGET_NUCLEO_F401RE/TARGET_STM/TARGET_NUCLEO_F401RE/PortNames.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,48 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortH = 7
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/TARGET_NUCLEO_F401RE/TARGET_STM/TARGET_NUCLEO_F401RE/device.h Thu Nov 27 13:33:22 2014 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 0 // Not present on this device - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/TARGET_NUCLEO_F401RE/TARGET_STM/TARGET_NUCLEO_F401RE/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,71 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_GPIO_OBJECT_H
-#define MBED_GPIO_OBJECT_H
-
-#include "mbed_assert.h"
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct {
- PinName pin;
- uint32_t mask;
- __IO uint32_t *reg_in;
- __IO uint16_t *reg_set;
- __IO uint16_t *reg_clr;
-} gpio_t;
-
-static inline void gpio_write(gpio_t *obj, int value)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (value) {
- *obj->reg_set = obj->mask;
- } else {
- *obj->reg_clr = obj->mask;
- }
-}
-
-static inline int gpio_read(gpio_t *obj)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- return ((*obj->reg_in & obj->mask) ? 1 : 0);
-}
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/TARGET_NUCLEO_F401RE/TARGET_STM/TARGET_NUCLEO_F401RE/objects.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,105 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_F401RE/TARGET_STM/TARGET_STM32F4/PeripheralPins.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,66 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_PERIPHERALPINS_H +#define MBED_PERIPHERALPINS_H + +#include "pinmap.h" +#include "PeripheralNames.h" + +//*** ADC *** + +extern const PinMap PinMap_ADC[]; + +//*** DAC *** + +extern const PinMap PinMap_DAC[]; + +//*** I2C *** + +extern const PinMap PinMap_I2C_SDA[]; +extern const PinMap PinMap_I2C_SCL[]; + +//*** PWM *** + +extern const PinMap PinMap_PWM[]; + +//*** SERIAL *** + +extern const PinMap PinMap_UART_TX[]; +extern const PinMap PinMap_UART_RX[]; + +//*** SPI *** + +extern const PinMap PinMap_SPI_MOSI[]; +extern const PinMap PinMap_SPI_MISO[]; +extern const PinMap PinMap_SPI_SCLK[]; +extern const PinMap PinMap_SPI_SSEL[]; + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F401RE/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PeripheralNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,81 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE
+} ADCName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE,
+ UART_6 = (int)USART6_BASE
+} UARTName;
+
+#define STDIO_UART_TX PA_2
+#define STDIO_UART_RX PA_3
+#define STDIO_UART UART_2
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE,
+ SPI_3 = (int)SPI3_BASE,
+ SPI_4 = (int)SPI4_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE,
+ I2C_3 = (int)I2C3_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_2 = (int)TIM2_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_4 = (int)TIM4_BASE,
+ PWM_5 = (int)TIM5_BASE,
+ PWM_9 = (int)TIM9_BASE,
+ PWM_10 = (int)TIM10_BASE,
+ PWM_11 = (int)TIM11_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F401RE/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PinNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,182 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_2 = 0x32,
+
+ PH_0 = 0x70,
+ PH_1 = 0x71,
+
+ // Arduino connector namings
+ A0 = PA_0,
+ A1 = PA_1,
+ A2 = PA_4,
+ A3 = PB_0,
+ A4 = PC_1,
+ A5 = PC_0,
+ D0 = PA_3,
+ D1 = PA_2,
+ D2 = PA_10,
+ D3 = PB_3,
+ D4 = PB_5,
+ D5 = PB_4,
+ D6 = PB_10,
+ D7 = PA_8,
+ D8 = PA_9,
+ D9 = PC_7,
+ D10 = PB_6,
+ D11 = PA_7,
+ D12 = PA_6,
+ D13 = PA_5,
+ D14 = PB_9,
+ D15 = PB_8,
+
+ // Generic signals namings
+ LED1 = PA_5,
+ LED2 = PA_5,
+ LED3 = PA_5,
+ LED4 = PA_5,
+ USER_BUTTON = PC_13,
+ SERIAL_TX = PA_2,
+ SERIAL_RX = PA_3,
+ USBTX = PA_2,
+ USBRX = PA_3,
+ I2C_SCL = PB_8,
+ I2C_SDA = PB_9,
+ SPI_MOSI = PA_7,
+ SPI_MISO = PA_6,
+ SPI_SCK = PA_5,
+ SPI_CS = PB_6,
+ PWM_OUT = PB_3,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F401RE/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/PortNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,49 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortE = 4,
+ PortH = 7
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_F401RE/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/device.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,70 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 // Not present on this device + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F401RE/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F401RE/objects.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,105 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index; // Used by irq
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+ uint32_t slave;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t period;
+ uint32_t pulse;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F401RE/TARGET_STM/TARGET_STM32F4/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,75 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_GPIO_OBJECT_H
+#define MBED_GPIO_OBJECT_H
+
+#include "mbed_assert.h"
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ uint32_t mask;
+ __IO uint32_t *reg_in;
+ __IO uint16_t *reg_set;
+ __IO uint16_t *reg_clr;
+} gpio_t;
+
+static inline void gpio_write(gpio_t *obj, int value)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ if (value) {
+ *obj->reg_set = obj->mask;
+ } else {
+ *obj->reg_clr = obj->mask;
+ }
+}
+
+static inline int gpio_read(gpio_t *obj)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ return ((*obj->reg_in & obj->mask) ? 1 : 0);
+}
+
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/startup_stm32f401xe.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_eth.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hash.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rng.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sai.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_usb.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_MICRO/system_stm32f4xx.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/startup_stm32f401xe.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_eth.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rng.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sai.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_usb.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_ARM_STD/system_stm32f4xx.o has changed
--- a/TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/NUCLEO_F401RE.ld Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,151 +0,0 @@
-/* Linker script for STM32F407 */
-
-/* Linker script to configure memory regions. */
-MEMORY
-{
- FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K
-/* CCM (rwx) : ORIGIN = 0x10000000, LENGTH = 64K */
- RAM (rwx) : ORIGIN = 0x20000194, LENGTH = 96k - 0x194
-}
-
-/* Linker script to place sections and symbol values. Should be used together
- * with other linker script that defines memory regions FLASH and RAM.
- * It references following symbols, which must be defined in code:
- * Reset_Handler : Entry of reset handler
- *
- * It defines following symbols, which code can use without definition:
- * __exidx_start
- * __exidx_end
- * __etext
- * __data_start__
- * __preinit_array_start
- * __preinit_array_end
- * __init_array_start
- * __init_array_end
- * __fini_array_start
- * __fini_array_end
- * __data_end__
- * __bss_start__
- * __bss_end__
- * __end__
- * end
- * __HeapLimit
- * __StackLimit
- * __StackTop
- * __stack
- */
-ENTRY(Reset_Handler)
-
-SECTIONS
-{
- .text :
- {
- KEEP(*(.isr_vector))
- *(.text*)
-
- KEEP(*(.init))
- KEEP(*(.fini))
-
- /* .ctors */
- *crtbegin.o(.ctors)
- *crtbegin?.o(.ctors)
- *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
- *(SORT(.ctors.*))
- *(.ctors)
-
- /* .dtors */
- *crtbegin.o(.dtors)
- *crtbegin?.o(.dtors)
- *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
- *(SORT(.dtors.*))
- *(.dtors)
-
- *(.rodata*)
-
- KEEP(*(.eh_frame*))
- } > FLASH
-
- .ARM.extab :
- {
- *(.ARM.extab* .gnu.linkonce.armextab.*)
- } > FLASH
-
- __exidx_start = .;
- .ARM.exidx :
- {
- *(.ARM.exidx* .gnu.linkonce.armexidx.*)
- } > FLASH
- __exidx_end = .;
-
- __etext = .;
-
- .data : AT (__etext)
- {
- __data_start__ = .;
- *(vtable)
- *(.data*)
-
- . = ALIGN(4);
- /* preinit data */
- PROVIDE_HIDDEN (__preinit_array_start = .);
- KEEP(*(.preinit_array))
- PROVIDE_HIDDEN (__preinit_array_end = .);
-
- . = ALIGN(4);
- /* init data */
- PROVIDE_HIDDEN (__init_array_start = .);
- KEEP(*(SORT(.init_array.*)))
- KEEP(*(.init_array))
- PROVIDE_HIDDEN (__init_array_end = .);
-
-
- . = ALIGN(4);
- /* finit data */
- PROVIDE_HIDDEN (__fini_array_start = .);
- KEEP(*(SORT(.fini_array.*)))
- KEEP(*(.fini_array))
- PROVIDE_HIDDEN (__fini_array_end = .);
-
- KEEP(*(.jcr*))
- . = ALIGN(4);
- /* All data end */
- __data_end__ = .;
-
- } > RAM
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start__ = .;
- *(.bss*)
- *(COMMON)
- . = ALIGN(4);
- __bss_end__ = .;
- } > RAM
-
- .heap (COPY):
- {
- __end__ = .;
- end = __end__;
- *(.heap*)
- __HeapLimit = .;
- } > RAM
-
- /* .stack_dummy section doesn't contains any symbols. It is only
- * used for linker to calculate size of stack sections, and assign
- * values to stack symbols later */
- .stack_dummy (COPY):
- {
- *(.stack*)
- } > RAM
-
- /* Set stack top to end of RAM, and stack limit move down by
- * size of stack_dummy section */
- __StackTop = ORIGIN(RAM) + LENGTH(RAM);
- __StackLimit = __StackTop - SIZEOF(.stack_dummy);
- PROVIDE(__stack = __StackTop);
-
- /* Check if data + heap + stack exceeds RAM limit */
- ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
-}
-
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/STM32F401XE.ld Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,153 @@
+/* Linker script to configure memory regions. */
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K
+ RAM (rwx) : ORIGIN = 0x20000194, LENGTH = 96k - 0x194
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ * _estack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.isr_vector))
+ *(.text*)
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+ _sidata = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ _sdata = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ KEEP(*(.jcr*))
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+ _edata = .;
+
+ } > RAM
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start__ = .;
+ _sbss = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ _ebss = .;
+ } > RAM
+
+ .heap (COPY):
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy (COPY):
+ {
+ *(.stack*)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ _estack = __StackTop;
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/hal_tick.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/startup_STM32F40x.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/startup_stm32f401xe.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_eth.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_hash.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rng.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_sai.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/stm32f4xx_ll_usb.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_GCC_ARM/system_stm32f4xx.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/startup_stm32f401xe.o has changed
--- a/TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f401xe.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f401xe.icf Tue Feb 03 15:31:20 2015 +0000
@@ -1,30 +1,32 @@
-/* [ROM] */
-define symbol __intvec_start__ = 0x08000000;
-define symbol __region_ROM_start__ = 0x08000000;
-define symbol __region_ROM_end__ = 0x0807FFFF;
-
-/* [RAM] Vector table dynamic copy: 101 vectors * 4 bytes = 404 bytes (0x194) */
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x0807FFFF;
define symbol __NVIC_start__ = 0x20000000;
define symbol __NVIC_end__ = 0x20000197; /* to be aligned on 8 bytes */
-define symbol __region_RAM_start__ = 0x20000198;
-define symbol __region_RAM_end__ = 0x20017E67; /* 0x17FFF - 0x198 */
-
-/* Memory regions */
-define memory mem with size = 4G;
-define region ROM_region = mem:[from __region_ROM_start__ to __region_ROM_end__];
-define region RAM_region = mem:[from __region_RAM_start__ to __region_RAM_end__];
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000198;
+define symbol __ICFEDIT_region_RAM_end__ = 0x20017FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x2000;
+define symbol __ICFEDIT_size_heap__ = 0x2000;
+/**** End of ICF editor section. ###ICF###*/
-/* Stack and Heap */
-define symbol __size_cstack__ = 0x400;
-define symbol __size_heap__ = 0x400;
-define block CSTACK with alignment = 8, size = __size_cstack__ { };
-define block HEAP with alignment = 8, size = __size_heap__ { };
-define block STACKHEAP with fixed order { block HEAP, block CSTACK };
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
-initialize by copy with packing = zeros { readwrite };
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+initialize by copy { readwrite };
do not initialize { section .noinit };
-place at address mem:__intvec_start__ { readonly section .intvec };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
-place in RAM_region { readwrite, block STACKHEAP };
+place in RAM_region { readwrite,
+ block HEAP, block CSTACK };
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_eth.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_hash.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_rng.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_sai.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/stm32f4xx_ll_usb.o has changed
Binary file TARGET_NUCLEO_F401RE/TOOLCHAIN_IAR/system_stm32f4xx.o has changed
--- a/TARGET_NUCLEO_F401RE/stm32f4xx_hal_rcc.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F401RE/stm32f4xx_hal_rcc.h Tue Feb 03 15:31:20 2015 +0000 @@ -530,6 +530,8 @@ #define __GPIOC_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOCEN)) #define __GPIOD_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIODEN)) #define __GPIOE_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOEEN)) +#define __GPIOF_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOFEN)) +#define __GPIOG_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOGEN)) #define __GPIOH_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOHEN)) #define __CRC_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_CRCEN)) #define __BKPSRAM_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_BKPSRAMEN)) @@ -542,6 +544,8 @@ #define __GPIOC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOCEN)) #define __GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) #define __GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) +#define __GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN)) +#define __GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN)) #define __GPIOH_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOHEN)) #define __CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) #define __BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
--- a/TARGET_NUCLEO_F411RE/TARGET_STM/TARGET_NUCLEO_F411RE/PeripheralNames.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,82 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- ADC_1 = (int)ADC1_BASE
-} ADCName;
-
-typedef enum {
- UART_1 = (int)USART1_BASE,
- UART_2 = (int)USART2_BASE,
- UART_6 = (int)USART6_BASE
-} UARTName;
-
-#define STDIO_UART_TX PA_2
-#define STDIO_UART_RX PA_3
-#define STDIO_UART UART_2
-
-typedef enum {
- SPI_1 = (int)SPI1_BASE,
- SPI_2 = (int)SPI2_BASE,
- SPI_3 = (int)SPI3_BASE,
- SPI_4 = (int)SPI4_BASE,
- SPI_5 = (int)SPI5_BASE
-} SPIName;
-
-typedef enum {
- I2C_1 = (int)I2C1_BASE,
- I2C_2 = (int)I2C2_BASE,
- I2C_3 = (int)I2C3_BASE
-} I2CName;
-
-typedef enum {
- PWM_1 = (int)TIM1_BASE,
- PWM_2 = (int)TIM2_BASE,
- PWM_3 = (int)TIM3_BASE,
- PWM_4 = (int)TIM4_BASE,
- PWM_5 = (int)TIM5_BASE,
- PWM_9 = (int)TIM9_BASE,
- PWM_10 = (int)TIM10_BASE,
- PWM_11 = (int)TIM11_BASE
-} PWMName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/TARGET_NUCLEO_F411RE/TARGET_STM/TARGET_NUCLEO_F411RE/PeripheralPins.h Thu Nov 27 13:33:22 2014 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,62 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ - -#ifndef MBED_PERIPHERALPINS_H -#define MBED_PERIPHERALPINS_H - -#include "pinmap.h" -#include "PeripheralNames.h" - -//*** ADC *** - -extern const PinMap PinMap_ADC[]; - -//*** I2C *** - -extern const PinMap PinMap_I2C_SDA[]; -extern const PinMap PinMap_I2C_SCL[]; - -//*** PWM *** - -extern const PinMap PinMap_PWM[]; - -//*** SERIAL *** - -extern const PinMap PinMap_UART_TX[]; -extern const PinMap PinMap_UART_RX[]; - -//*** SPI *** - -extern const PinMap PinMap_SPI_MOSI[]; -extern const PinMap PinMap_SPI_MISO[]; -extern const PinMap PinMap_SPI_SCLK[]; -extern const PinMap PinMap_SPI_SSEL[]; - -#endif
--- a/TARGET_NUCLEO_F411RE/TARGET_STM/TARGET_NUCLEO_F411RE/PinNames.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,182 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
-#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
-#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
-#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
-#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
-#define STM_MODE_INPUT (0)
-#define STM_MODE_OUTPUT_PP (1)
-#define STM_MODE_OUTPUT_OD (2)
-#define STM_MODE_AF_PP (3)
-#define STM_MODE_AF_OD (4)
-#define STM_MODE_ANALOG (5)
-#define STM_MODE_IT_RISING (6)
-#define STM_MODE_IT_FALLING (7)
-#define STM_MODE_IT_RISING_FALLING (8)
-#define STM_MODE_EVT_RISING (9)
-#define STM_MODE_EVT_FALLING (10)
-#define STM_MODE_EVT_RISING_FALLING (11)
-#define STM_MODE_IT_EVT_RESET (12)
-
-// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
-// Low nibble = pin number
-#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
-#define STM_PIN(X) ((uint32_t)(X) & 0xF)
-
-typedef enum {
- PIN_INPUT,
- PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
- PA_0 = 0x00,
- PA_1 = 0x01,
- PA_2 = 0x02,
- PA_3 = 0x03,
- PA_4 = 0x04,
- PA_5 = 0x05,
- PA_6 = 0x06,
- PA_7 = 0x07,
- PA_8 = 0x08,
- PA_9 = 0x09,
- PA_10 = 0x0A,
- PA_11 = 0x0B,
- PA_12 = 0x0C,
- PA_13 = 0x0D,
- PA_14 = 0x0E,
- PA_15 = 0x0F,
-
- PB_0 = 0x10,
- PB_1 = 0x11,
- PB_2 = 0x12,
- PB_3 = 0x13,
- PB_4 = 0x14,
- PB_5 = 0x15,
- PB_6 = 0x16,
- PB_7 = 0x17,
- PB_8 = 0x18,
- PB_9 = 0x19,
- PB_10 = 0x1A,
- PB_12 = 0x1C,
- PB_13 = 0x1D,
- PB_14 = 0x1E,
- PB_15 = 0x1F,
-
- PC_0 = 0x20,
- PC_1 = 0x21,
- PC_2 = 0x22,
- PC_3 = 0x23,
- PC_4 = 0x24,
- PC_5 = 0x25,
- PC_6 = 0x26,
- PC_7 = 0x27,
- PC_8 = 0x28,
- PC_9 = 0x29,
- PC_10 = 0x2A,
- PC_11 = 0x2B,
- PC_12 = 0x2C,
- PC_13 = 0x2D,
- PC_14 = 0x2E,
- PC_15 = 0x2F,
-
- PD_2 = 0x32,
-
- PH_0 = 0x70,
- PH_1 = 0x71,
-
- // Arduino connector namings
- A0 = PA_0,
- A1 = PA_1,
- A2 = PA_4,
- A3 = PB_0,
- A4 = PC_1,
- A5 = PC_0,
- D0 = PA_3,
- D1 = PA_2,
- D2 = PA_10,
- D3 = PB_3,
- D4 = PB_5,
- D5 = PB_4,
- D6 = PB_10,
- D7 = PA_8,
- D8 = PA_9,
- D9 = PC_7,
- D10 = PB_6,
- D11 = PA_7,
- D12 = PA_6,
- D13 = PA_5,
- D14 = PB_9,
- D15 = PB_8,
-
- // Generic signals namings
- LED1 = PA_5,
- LED2 = PA_5,
- LED3 = PA_5,
- LED4 = PA_5,
- USER_BUTTON = PC_13,
- SERIAL_TX = PA_2,
- SERIAL_RX = PA_3,
- USBTX = PA_2,
- USBRX = PA_3,
- I2C_SCL = PB_8,
- I2C_SDA = PB_9,
- SPI_MOSI = PA_7,
- SPI_MISO = PA_6,
- SPI_SCK = PA_5,
- SPI_CS = PB_6,
- PWM_OUT = PB_3,
-
- // Not connected
- NC = (int)0xFFFFFFFF
-} PinName;
-
-typedef enum {
- PullNone = 0,
- PullUp = 1,
- PullDown = 2,
- OpenDrain = 3,
- PullDefault = PullNone
-} PinMode;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/TARGET_NUCLEO_F411RE/TARGET_STM/TARGET_NUCLEO_F411RE/PortNames.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,48 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_PORTNAMES_H
-#define MBED_PORTNAMES_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
- PortA = 0,
- PortB = 1,
- PortC = 2,
- PortD = 3,
- PortH = 7
-} PortName;
-
-#ifdef __cplusplus
-}
-#endif
-#endif
--- a/TARGET_NUCLEO_F411RE/TARGET_STM/TARGET_NUCLEO_F411RE/device.h Thu Nov 27 13:33:22 2014 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,70 +0,0 @@ -/* mbed Microcontroller Library - ******************************************************************************* - * Copyright (c) 2014, STMicroelectronics - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - ******************************************************************************* - */ -#ifndef MBED_DEVICE_H -#define MBED_DEVICE_H - -#define DEVICE_PORTIN 1 -#define DEVICE_PORTOUT 1 -#define DEVICE_PORTINOUT 1 - -#define DEVICE_INTERRUPTIN 1 - -#define DEVICE_ANALOGIN 1 -#define DEVICE_ANALOGOUT 0 // Not present on this device - -#define DEVICE_SERIAL 1 - -#define DEVICE_I2C 1 -#define DEVICE_I2CSLAVE 1 - -#define DEVICE_SPI 1 -#define DEVICE_SPISLAVE 1 - -#define DEVICE_RTC 1 - -#define DEVICE_PWMOUT 1 - -#define DEVICE_SLEEP 1 - -//======================================= - -#define DEVICE_SEMIHOST 0 -#define DEVICE_LOCALFILESYSTEM 0 -#define DEVICE_ID_LENGTH 24 - -#define DEVICE_DEBUG_AWARENESS 0 - -#define DEVICE_STDIO_MESSAGES 1 - -#define DEVICE_ERROR_RED 0 - -#include "objects.h" - -#endif
--- a/TARGET_NUCLEO_F411RE/TARGET_STM/TARGET_NUCLEO_F411RE/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,71 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_GPIO_OBJECT_H
-#define MBED_GPIO_OBJECT_H
-
-#include "mbed_assert.h"
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef struct {
- PinName pin;
- uint32_t mask;
- __IO uint32_t *reg_in;
- __IO uint16_t *reg_set;
- __IO uint16_t *reg_clr;
-} gpio_t;
-
-static inline void gpio_write(gpio_t *obj, int value)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- if (value) {
- *obj->reg_set = obj->mask;
- } else {
- *obj->reg_clr = obj->mask;
- }
-}
-
-static inline int gpio_read(gpio_t *obj)
-{
- MBED_ASSERT(obj->pin != (PinName)NC);
- return ((*obj->reg_in & obj->mask) ? 1 : 0);
-}
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- a/TARGET_NUCLEO_F411RE/TARGET_STM/TARGET_NUCLEO_F411RE/objects.h Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,105 +0,0 @@
-/* mbed Microcontroller Library
- *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
-#ifndef MBED_OBJECTS_H
-#define MBED_OBJECTS_H
-
-#include "cmsis.h"
-#include "PortNames.h"
-#include "PeripheralNames.h"
-#include "PinNames.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-struct gpio_irq_s {
- IRQn_Type irq_n;
- uint32_t irq_index;
- uint32_t event;
- PinName pin;
-};
-
-struct port_s {
- PortName port;
- uint32_t mask;
- PinDirection direction;
- __IO uint32_t *reg_in;
- __IO uint32_t *reg_out;
-};
-
-struct analogin_s {
- ADCName adc;
- PinName pin;
-};
-
-struct serial_s {
- UARTName uart;
- int index; // Used by irq
- uint32_t baudrate;
- uint32_t databits;
- uint32_t stopbits;
- uint32_t parity;
- PinName pin_tx;
- PinName pin_rx;
-};
-
-struct spi_s {
- SPIName spi;
- uint32_t bits;
- uint32_t cpol;
- uint32_t cpha;
- uint32_t mode;
- uint32_t nss;
- uint32_t br_presc;
- PinName pin_miso;
- PinName pin_mosi;
- PinName pin_sclk;
- PinName pin_ssel;
-};
-
-struct i2c_s {
- I2CName i2c;
- uint32_t slave;
-};
-
-struct pwmout_s {
- PWMName pwm;
- PinName pin;
- uint32_t period;
- uint32_t pulse;
-};
-
-#include "gpio_object.h"
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_F411RE/TARGET_STM/TARGET_STM32F4/PeripheralPins.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,66 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_PERIPHERALPINS_H +#define MBED_PERIPHERALPINS_H + +#include "pinmap.h" +#include "PeripheralNames.h" + +//*** ADC *** + +extern const PinMap PinMap_ADC[]; + +//*** DAC *** + +extern const PinMap PinMap_DAC[]; + +//*** I2C *** + +extern const PinMap PinMap_I2C_SDA[]; +extern const PinMap PinMap_I2C_SCL[]; + +//*** PWM *** + +extern const PinMap PinMap_PWM[]; + +//*** SERIAL *** + +extern const PinMap PinMap_UART_TX[]; +extern const PinMap PinMap_UART_RX[]; + +//*** SPI *** + +extern const PinMap PinMap_SPI_MOSI[]; +extern const PinMap PinMap_SPI_MISO[]; +extern const PinMap PinMap_SPI_SCLK[]; +extern const PinMap PinMap_SPI_SSEL[]; + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F411RE/PeripheralNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,82 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ ADC_1 = (int)ADC1_BASE
+} ADCName;
+
+typedef enum {
+ UART_1 = (int)USART1_BASE,
+ UART_2 = (int)USART2_BASE,
+ UART_6 = (int)USART6_BASE
+} UARTName;
+
+#define STDIO_UART_TX PA_2
+#define STDIO_UART_RX PA_3
+#define STDIO_UART UART_2
+
+typedef enum {
+ SPI_1 = (int)SPI1_BASE,
+ SPI_2 = (int)SPI2_BASE,
+ SPI_3 = (int)SPI3_BASE,
+ SPI_4 = (int)SPI4_BASE,
+ SPI_5 = (int)SPI5_BASE
+} SPIName;
+
+typedef enum {
+ I2C_1 = (int)I2C1_BASE,
+ I2C_2 = (int)I2C2_BASE,
+ I2C_3 = (int)I2C3_BASE
+} I2CName;
+
+typedef enum {
+ PWM_1 = (int)TIM1_BASE,
+ PWM_2 = (int)TIM2_BASE,
+ PWM_3 = (int)TIM3_BASE,
+ PWM_4 = (int)TIM4_BASE,
+ PWM_5 = (int)TIM5_BASE,
+ PWM_9 = (int)TIM9_BASE,
+ PWM_10 = (int)TIM10_BASE,
+ PWM_11 = (int)TIM11_BASE
+} PWMName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F411RE/PinNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,182 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// See stm32f4xx_hal_gpio.h and stm32f4xx_hal_gpio_ex.h for values of MODE, PUPD and AFNUM
+#define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((AFNUM) << 7) | ((PUPD) << 4) | ((MODE) << 0)))
+#define STM_PIN_MODE(X) (((X) >> 0) & 0x0F)
+#define STM_PIN_PUPD(X) (((X) >> 4) & 0x07)
+#define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F)
+#define STM_MODE_INPUT (0)
+#define STM_MODE_OUTPUT_PP (1)
+#define STM_MODE_OUTPUT_OD (2)
+#define STM_MODE_AF_PP (3)
+#define STM_MODE_AF_OD (4)
+#define STM_MODE_ANALOG (5)
+#define STM_MODE_IT_RISING (6)
+#define STM_MODE_IT_FALLING (7)
+#define STM_MODE_IT_RISING_FALLING (8)
+#define STM_MODE_EVT_RISING (9)
+#define STM_MODE_EVT_FALLING (10)
+#define STM_MODE_EVT_RISING_FALLING (11)
+#define STM_MODE_IT_EVT_RESET (12)
+
+// High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H)
+// Low nibble = pin number
+#define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF)
+#define STM_PIN(X) ((uint32_t)(X) & 0xF)
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+typedef enum {
+ PA_0 = 0x00,
+ PA_1 = 0x01,
+ PA_2 = 0x02,
+ PA_3 = 0x03,
+ PA_4 = 0x04,
+ PA_5 = 0x05,
+ PA_6 = 0x06,
+ PA_7 = 0x07,
+ PA_8 = 0x08,
+ PA_9 = 0x09,
+ PA_10 = 0x0A,
+ PA_11 = 0x0B,
+ PA_12 = 0x0C,
+ PA_13 = 0x0D,
+ PA_14 = 0x0E,
+ PA_15 = 0x0F,
+
+ PB_0 = 0x10,
+ PB_1 = 0x11,
+ PB_2 = 0x12,
+ PB_3 = 0x13,
+ PB_4 = 0x14,
+ PB_5 = 0x15,
+ PB_6 = 0x16,
+ PB_7 = 0x17,
+ PB_8 = 0x18,
+ PB_9 = 0x19,
+ PB_10 = 0x1A,
+ PB_12 = 0x1C,
+ PB_13 = 0x1D,
+ PB_14 = 0x1E,
+ PB_15 = 0x1F,
+
+ PC_0 = 0x20,
+ PC_1 = 0x21,
+ PC_2 = 0x22,
+ PC_3 = 0x23,
+ PC_4 = 0x24,
+ PC_5 = 0x25,
+ PC_6 = 0x26,
+ PC_7 = 0x27,
+ PC_8 = 0x28,
+ PC_9 = 0x29,
+ PC_10 = 0x2A,
+ PC_11 = 0x2B,
+ PC_12 = 0x2C,
+ PC_13 = 0x2D,
+ PC_14 = 0x2E,
+ PC_15 = 0x2F,
+
+ PD_2 = 0x32,
+
+ PH_0 = 0x70,
+ PH_1 = 0x71,
+
+ // Arduino connector namings
+ A0 = PA_0,
+ A1 = PA_1,
+ A2 = PA_4,
+ A3 = PB_0,
+ A4 = PC_1,
+ A5 = PC_0,
+ D0 = PA_3,
+ D1 = PA_2,
+ D2 = PA_10,
+ D3 = PB_3,
+ D4 = PB_5,
+ D5 = PB_4,
+ D6 = PB_10,
+ D7 = PA_8,
+ D8 = PA_9,
+ D9 = PC_7,
+ D10 = PB_6,
+ D11 = PA_7,
+ D12 = PA_6,
+ D13 = PA_5,
+ D14 = PB_9,
+ D15 = PB_8,
+
+ // Generic signals namings
+ LED1 = PA_5,
+ LED2 = PA_5,
+ LED3 = PA_5,
+ LED4 = PA_5,
+ USER_BUTTON = PC_13,
+ SERIAL_TX = PA_2,
+ SERIAL_RX = PA_3,
+ USBTX = PA_2,
+ USBRX = PA_3,
+ I2C_SCL = PB_8,
+ I2C_SDA = PB_9,
+ SPI_MOSI = PA_7,
+ SPI_MISO = PA_6,
+ SPI_SCK = PA_5,
+ SPI_CS = PB_6,
+ PWM_OUT = PB_3,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+typedef enum {
+ PullNone = 0,
+ PullUp = 1,
+ PullDown = 2,
+ OpenDrain = 3,
+ PullDefault = PullNone
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F411RE/PortNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,49 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortE = 4,
+ PortH = 7
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_F411RE/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F411RE/device.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,70 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 0 // Not present on this device + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_RTC 1 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SLEEP 1 + +//======================================= + +#define DEVICE_SEMIHOST 0 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 0 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F411RE/objects.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,105 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ IRQn_Type irq_n;
+ uint32_t irq_index;
+ uint32_t event;
+ PinName pin;
+};
+
+struct port_s {
+ PortName port;
+ uint32_t mask;
+ PinDirection direction;
+ __IO uint32_t *reg_in;
+ __IO uint32_t *reg_out;
+};
+
+struct analogin_s {
+ ADCName adc;
+ PinName pin;
+};
+
+struct serial_s {
+ UARTName uart;
+ int index; // Used by irq
+ uint32_t baudrate;
+ uint32_t databits;
+ uint32_t stopbits;
+ uint32_t parity;
+ PinName pin_tx;
+ PinName pin_rx;
+};
+
+struct spi_s {
+ SPIName spi;
+ uint32_t bits;
+ uint32_t cpol;
+ uint32_t cpha;
+ uint32_t mode;
+ uint32_t nss;
+ uint32_t br_presc;
+ PinName pin_miso;
+ PinName pin_mosi;
+ PinName pin_sclk;
+ PinName pin_ssel;
+};
+
+struct i2c_s {
+ I2CName i2c;
+ uint32_t slave;
+};
+
+struct pwmout_s {
+ PWMName pwm;
+ PinName pin;
+ uint32_t period;
+ uint32_t pulse;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/TARGET_STM/TARGET_STM32F4/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,75 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_GPIO_OBJECT_H
+#define MBED_GPIO_OBJECT_H
+
+#include "mbed_assert.h"
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ uint32_t mask;
+ __IO uint32_t *reg_in;
+ __IO uint16_t *reg_set;
+ __IO uint16_t *reg_clr;
+} gpio_t;
+
+static inline void gpio_write(gpio_t *obj, int value)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ if (value) {
+ *obj->reg_set = obj->mask;
+ } else {
+ *obj->reg_clr = obj->mask;
+ }
+}
+
+static inline int gpio_read(gpio_t *obj)
+{
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ return ((*obj->reg_in & obj->mask) ? 1 : 0);
+}
+
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/startup_stm32f411xe.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_eth.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hash.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rng.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sai.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/stm32f4xx_ll_usb.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_MICRO/system_stm32f4xx.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/startup_stm32f411xe.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_eth.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rng.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sai.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/stm32f4xx_ll_usb.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_ARM_STD/system_stm32f4xx.o has changed
--- a/TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/NUCLEO_F411RE.ld Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,151 +0,0 @@
-/* Linker script for STM32F411 */
-
-/* Linker script to configure memory regions. */
-MEMORY
-{
- FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K
-/* CCM (rwx) : ORIGIN = 0x10000000, LENGTH = 64K */
- RAM (rwx) : ORIGIN = 0x20000198, LENGTH = 128k - 0x198
-}
-
-/* Linker script to place sections and symbol values. Should be used together
- * with other linker script that defines memory regions FLASH and RAM.
- * It references following symbols, which must be defined in code:
- * Reset_Handler : Entry of reset handler
- *
- * It defines following symbols, which code can use without definition:
- * __exidx_start
- * __exidx_end
- * __etext
- * __data_start__
- * __preinit_array_start
- * __preinit_array_end
- * __init_array_start
- * __init_array_end
- * __fini_array_start
- * __fini_array_end
- * __data_end__
- * __bss_start__
- * __bss_end__
- * __end__
- * end
- * __HeapLimit
- * __StackLimit
- * __StackTop
- * __stack
- */
-ENTRY(Reset_Handler)
-
-SECTIONS
-{
- .text :
- {
- KEEP(*(.isr_vector))
- *(.text*)
-
- KEEP(*(.init))
- KEEP(*(.fini))
-
- /* .ctors */
- *crtbegin.o(.ctors)
- *crtbegin?.o(.ctors)
- *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
- *(SORT(.ctors.*))
- *(.ctors)
-
- /* .dtors */
- *crtbegin.o(.dtors)
- *crtbegin?.o(.dtors)
- *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
- *(SORT(.dtors.*))
- *(.dtors)
-
- *(.rodata*)
-
- KEEP(*(.eh_frame*))
- } > FLASH
-
- .ARM.extab :
- {
- *(.ARM.extab* .gnu.linkonce.armextab.*)
- } > FLASH
-
- __exidx_start = .;
- .ARM.exidx :
- {
- *(.ARM.exidx* .gnu.linkonce.armexidx.*)
- } > FLASH
- __exidx_end = .;
-
- __etext = .;
-
- .data : AT (__etext)
- {
- __data_start__ = .;
- *(vtable)
- *(.data*)
-
- . = ALIGN(4);
- /* preinit data */
- PROVIDE_HIDDEN (__preinit_array_start = .);
- KEEP(*(.preinit_array))
- PROVIDE_HIDDEN (__preinit_array_end = .);
-
- . = ALIGN(4);
- /* init data */
- PROVIDE_HIDDEN (__init_array_start = .);
- KEEP(*(SORT(.init_array.*)))
- KEEP(*(.init_array))
- PROVIDE_HIDDEN (__init_array_end = .);
-
-
- . = ALIGN(4);
- /* finit data */
- PROVIDE_HIDDEN (__fini_array_start = .);
- KEEP(*(SORT(.fini_array.*)))
- KEEP(*(.fini_array))
- PROVIDE_HIDDEN (__fini_array_end = .);
-
- KEEP(*(.jcr*))
- . = ALIGN(4);
- /* All data end */
- __data_end__ = .;
-
- } > RAM
-
- .bss :
- {
- . = ALIGN(4);
- __bss_start__ = .;
- *(.bss*)
- *(COMMON)
- . = ALIGN(4);
- __bss_end__ = .;
- } > RAM
-
- .heap (COPY):
- {
- __end__ = .;
- end = __end__;
- *(.heap*)
- __HeapLimit = .;
- } > RAM
-
- /* .stack_dummy section doesn't contains any symbols. It is only
- * used for linker to calculate size of stack sections, and assign
- * values to stack symbols later */
- .stack_dummy (COPY):
- {
- *(.stack*)
- } > RAM
-
- /* Set stack top to end of RAM, and stack limit move down by
- * size of stack_dummy section */
- __StackTop = ORIGIN(RAM) + LENGTH(RAM);
- __StackLimit = __StackTop - SIZEOF(.stack_dummy);
- PROVIDE(__stack = __StackTop);
-
- /* Check if data + heap + stack exceeds RAM limit */
- ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
-}
-
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/STM32F411XE.ld Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,153 @@
+/* Linker script to configure memory regions. */
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K
+ RAM (rwx) : ORIGIN = 0x20000198, LENGTH = 128k - 0x198
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ * _estack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.isr_vector))
+ *(.text*)
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+ _sidata = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ _sdata = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ KEEP(*(.jcr*))
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+ _edata = .;
+
+ } > RAM
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start__ = .;
+ _sbss = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ _ebss = .;
+ } > RAM
+
+ .heap (COPY):
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy (COPY):
+ {
+ *(.stack*)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ _estack = __StackTop;
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/hal_tick.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/startup_STM32F41x.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/startup_stm32f411xe.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_eth.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_hash.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rng.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_sai.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/stm32f4xx_ll_usb.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_GCC_ARM/system_stm32f4xx.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/startup_stm32f411xe.o has changed
--- a/TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f411xe.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f411xe.icf Tue Feb 03 15:31:20 2015 +0000
@@ -15,8 +15,8 @@
define region RAM_region = mem:[from __region_RAM_start__ to __region_RAM_end__];
/* Stack and Heap */
-define symbol __size_cstack__ = 0x400;
-define symbol __size_heap__ = 0x400;
+define symbol __size_cstack__ = 0x4000;
+define symbol __size_heap__ = 0x4000;
define block CSTACK with alignment = 8, size = __size_cstack__ { };
define block HEAP with alignment = 8, size = __size_heap__ { };
define block STACKHEAP with fixed order { block HEAP, block CSTACK };
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_can.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dcmi.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dma2d.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_dma_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_eth.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_hash.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_hash_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_hcd.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_i2s_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_ltdc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_nand.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_pccard.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_rng.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_sai.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_sdram.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_ll_fmc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/stm32f4xx_ll_usb.o has changed
Binary file TARGET_NUCLEO_F411RE/TOOLCHAIN_IAR/system_stm32f4xx.o has changed
--- a/TARGET_NUCLEO_F411RE/stm32f4xx_hal_rcc.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_NUCLEO_F411RE/stm32f4xx_hal_rcc.h Tue Feb 03 15:31:20 2015 +0000 @@ -530,6 +530,8 @@ #define __GPIOC_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOCEN)) #define __GPIOD_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIODEN)) #define __GPIOE_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOEEN)) +#define __GPIOF_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOFEN)) +#define __GPIOG_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOGEN)) #define __GPIOH_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_GPIOHEN)) #define __CRC_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_CRCEN)) #define __BKPSRAM_CLK_ENABLE() (RCC->AHB1ENR |= (RCC_AHB1ENR_BKPSRAMEN)) @@ -542,6 +544,8 @@ #define __GPIOC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOCEN)) #define __GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) #define __GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) +#define __GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN)) +#define __GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN)) #define __GPIOH_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOHEN)) #define __CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) #define __BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN))
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_L053R8/TARGET_STM/TARGET_NUCLEO_L053R8/PeripheralPins.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,66 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_PERIPHERALPINS_H +#define MBED_PERIPHERALPINS_H + +#include "pinmap.h" +#include "PeripheralNames.h" + +//*** ADC *** + +extern const PinMap PinMap_ADC[]; + +//*** DAC *** + +extern const PinMap PinMap_DAC[]; + +//*** I2C *** + +extern const PinMap PinMap_I2C_SDA[]; +extern const PinMap PinMap_I2C_SCL[]; + +//*** PWM *** + +extern const PinMap PinMap_PWM[]; + +//*** SERIAL *** + +extern const PinMap PinMap_UART_TX[]; +extern const PinMap PinMap_UART_RX[]; + +//*** SPI *** + +extern const PinMap PinMap_SPI_MOSI[]; +extern const PinMap PinMap_SPI_MISO[]; +extern const PinMap PinMap_SPI_SCLK[]; +extern const PinMap PinMap_SPI_SSEL[]; + +#endif
--- a/TARGET_NUCLEO_L053R8/TARGET_STM/TARGET_NUCLEO_L053R8/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_L053R8/TARGET_STM/TARGET_NUCLEO_L053R8/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -64,6 +64,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/startup_stm32l053xx.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_lcd.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_lptim.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_rng.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/stm32l0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_MICRO/system_stm32l0xx.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/startup_stm32l053xx.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_lcd.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_lptim.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_rng.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/stm32l0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_ARM_STD/system_stm32l0xx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/STM32L053X8.ld Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,153 @@
+/* Linker script to configure memory regions. */
+MEMORY
+{
+ FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 64k
+ RAM (rwx) : ORIGIN = 0x200000C0, LENGTH = 8K - 0xC0
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ * _estack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.isr_vector))
+ *(.text*)
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+ _sidata = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ _sdata = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ KEEP(*(.jcr*))
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+ _edata = .;
+
+ } > RAM
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start__ = .;
+ _sbss = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ _ebss = .;
+ } > RAM
+
+ .heap (COPY):
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy (COPY):
+ {
+ *(.stack*)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ _estack = __StackTop;
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/hal_tick.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/startup_stm32l053xx.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_lcd.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_lptim.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_rng.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/stm32l0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_GCC_ARM/system_stm32l0xx.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/startup_stm32l053xx.o has changed
--- a/TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l053xx.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l053xx.icf Tue Feb 03 15:31:20 2015 +0000
@@ -15,8 +15,8 @@
define region RAM_region = mem:[from __region_RAM_start__ to __region_RAM_end__];
/* Stack and Heap */
-define symbol __size_cstack__ = 0x400;
-define symbol __size_heap__ = 0x400;
+define symbol __size_cstack__ = 0x500;
+define symbol __size_heap__ = 0x1000;
define block CSTACK with alignment = 8, size = __size_cstack__ { };
define block HEAP with alignment = 8, size = __size_heap__ { };
define block STACKHEAP with fixed order { block HEAP, block CSTACK };
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_crc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_i2c_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_lcd.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_lptim.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_rng.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_smartcard_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_smbus.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_tsc.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_uart_ex.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/stm32l0xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_L053R8/TOOLCHAIN_IAR/system_stm32l0xx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_L053R8/hal_tick.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,60 @@
+/**
+ ******************************************************************************
+ * @file hal_tick.h
+ * @author MCD Application Team
+ * @brief Initialization of HAL tick
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#ifndef __HAL_TICK_H
+#define __HAL_TICK_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#include "stm32l0xx.h"
+#include "cmsis_nvic.h"
+
+#define TIM_MST TIM21
+#define TIM_MST_IRQ TIM21_IRQn
+#define TIM_MST_RCC __TIM21_CLK_ENABLE()
+
+#define TIM_MST_RESET_ON __TIM21_FORCE_RESET()
+#define TIM_MST_RESET_OFF __TIM21_RELEASE_RESET()
+
+#define HAL_TICK_DELAY (1000) // 1 ms
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // __HAL_TICK_H
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_L152RE/TARGET_STM/TARGET_NUCLEO_L152RE/PeripheralPins.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,66 @@ +/* mbed Microcontroller Library + ******************************************************************************* + * Copyright (c) 2014, STMicroelectronics + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + ******************************************************************************* + */ + +#ifndef MBED_PERIPHERALPINS_H +#define MBED_PERIPHERALPINS_H + +#include "pinmap.h" +#include "PeripheralNames.h" + +//*** ADC *** + +extern const PinMap PinMap_ADC[]; + +//*** DAC *** + +extern const PinMap PinMap_DAC[]; + +//*** I2C *** + +extern const PinMap PinMap_I2C_SDA[]; +extern const PinMap PinMap_I2C_SCL[]; + +//*** PWM *** + +extern const PinMap PinMap_PWM[]; + +//*** SERIAL *** + +extern const PinMap PinMap_UART_TX[]; +extern const PinMap PinMap_UART_RX[]; + +//*** SPI *** + +extern const PinMap PinMap_SPI_MOSI[]; +extern const PinMap PinMap_SPI_MISO[]; +extern const PinMap PinMap_SPI_SCLK[]; +extern const PinMap PinMap_SPI_SSEL[]; + +#endif
--- a/TARGET_NUCLEO_L152RE/TARGET_STM/TARGET_NUCLEO_L152RE/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_L152RE/TARGET_STM/TARGET_NUCLEO_L152RE/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -64,6 +64,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/hal_tick.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/startup_stm32l152xe.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_lcd.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_spi_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/stm32l1xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_MICRO/system_stm32l1xx.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/hal_tick.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/startup_stm32l152xe.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_lcd.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_spi_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/system_stm32l1xx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/STM32L152XE.ld Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,156 @@
+/* Linker script to configure memory regions. */
+MEMORY
+{
+ /* 512KB FLASH, 80KB RAM, Reserve up till 0x13C. There are 0x73 vectors = 292
+ * bytes (0x124) in RAM. But all GCC scripts seem to require BootRAM @0x138
+ */
+ FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512k
+ RAM (rwx) : ORIGIN = 0x2000013C, LENGTH = 0x14000-0x13C
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * Reset_Handler : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ * _estack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .text :
+ {
+ KEEP(*(.isr_vector))
+ *(.text*)
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+ _sidata = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ _sdata = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ KEEP(*(.jcr*))
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+ _edata = .;
+
+ } > RAM
+
+ .bss :
+ {
+ . = ALIGN(4);
+ __bss_start__ = .;
+ _sbss = .;
+ *(.bss*)
+ *(COMMON)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ _ebss = .;
+ } > RAM
+
+ .heap (COPY):
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy (COPY):
+ {
+ *(.stack*)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ _estack = __StackTop;
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
--- a/TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/STM32L152XE_FLASH.ld Thu Nov 27 13:33:22 2014 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,167 +0,0 @@
-/*
-*****************************************************************************
-**
-** File : STM32L152XE_FLASH.ld
-**
-** Abstract : Linker script for STM32L152XE Device with
-** 512KByte FLASH, 80KByte RAM
-**
-** Set heap size, stack size and stack location according
-** to application requirements.
-**
-** Set memory bank area and size if external memory is used.
-**
-** Target : STMicroelectronics STM32
-**
-** Environment : Atollic TrueSTUDIO(R)
-**
-** Distribution: The file is distributed as is, without any warranty
-** of any kind.
-**
-** (c)Copyright Atollic AB.
-** You may use this file as-is or modify it according to the needs of your
-** project. This file may only be built (assembled or compiled and linked)
-** using the Atollic TrueSTUDIO(R) product. The use of this file together
-** with other tools than Atollic TrueSTUDIO(R) is not permitted.
-**
-*****************************************************************************
-*/
-
-/* Entry Point */
-ENTRY(Reset_Handler)
-
-/* Highest address of the user mode stack */
-_estack = 0x20013FFF; /* end of RAM */
-
-/* Generate a link error if heap and stack don't fit into RAM */
-_Min_Heap_Size = 0x200; /* required amount of heap */
-_Min_Stack_Size = 0x400; /* required amount of stack */
-
-/* Specify the memory areas */
-MEMORY
-{
-FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K
-RAM (xrw) : ORIGIN = 0x2000013C, LENGTH = 80K - 0x13C
-}
-
-/* Define output sections */
-SECTIONS
-{
- /* The startup code goes first into FLASH */
- .isr_vector :
- {
- . = ALIGN(4);
- KEEP(*(.isr_vector)) /* Startup code */
- . = ALIGN(4);
- } >FLASH
-
- /* The program code and other data goes into FLASH */
- .text :
- {
- . = ALIGN(4);
- *(.text) /* .text sections (code) */
- *(.text*) /* .text* sections (code) */
- *(.glue_7) /* glue arm to thumb code */
- *(.glue_7t) /* glue thumb to arm code */
- *(.eh_frame)
-
- KEEP (*(.init))
- KEEP (*(.fini))
-
- . = ALIGN(4);
- _etext = .; /* define a global symbols at end of code */
- } >FLASH
-
- /* Constant data goes into FLASH */
- .rodata :
- {
- . = ALIGN(4);
- *(.rodata) /* .rodata sections (constants, strings, etc.) */
- *(.rodata*) /* .rodata* sections (constants, strings, etc.) */
- . = ALIGN(4);
- } >FLASH
-
- .ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
- .ARM : {
- __exidx_start = .;
- *(.ARM.exidx*)
- __exidx_end = .;
- } >FLASH
-
- .preinit_array :
- {
- PROVIDE_HIDDEN (__preinit_array_start = .);
- KEEP (*(.preinit_array*))
- PROVIDE_HIDDEN (__preinit_array_end = .);
- } >FLASH
- .init_array :
- {
- PROVIDE_HIDDEN (__init_array_start = .);
- KEEP (*(SORT(.init_array.*)))
- KEEP (*(.init_array*))
- PROVIDE_HIDDEN (__init_array_end = .);
- } >FLASH
- .fini_array :
- {
- PROVIDE_HIDDEN (__fini_array_start = .);
- KEEP (*(SORT(.fini_array.*)))
- KEEP (*(.fini_array*))
- PROVIDE_HIDDEN (__fini_array_end = .);
- } >FLASH
-
- /* used by the startup to initialize data */
- _sidata = LOADADDR(.data);
-
- /* Initialized data sections goes into RAM, load LMA copy after code */
- .data :
- {
- . = ALIGN(4);
- _sdata = .; /* create a global symbol at data start */
- *(.data) /* .data sections */
- *(.data*) /* .data* sections */
-
- . = ALIGN(4);
- _edata = .; /* define a global symbol at data end */
- } >RAM AT> FLASH
-
-
- /* Uninitialized data section */
- . = ALIGN(4);
- .bss :
- {
- /* This is used by the startup in order to initialize the .bss secion */
- _sbss = .; /* define a global symbol at bss start */
- __bss_start__ = _sbss;
- *(.bss)
- *(.bss*)
- *(COMMON)
-
- . = ALIGN(4);
- _ebss = .; /* define a global symbol at bss end */
- __bss_end__ = _ebss;
- } >RAM
-
- /* User_heap_stack section, used to check that there is enough RAM left */
- ._user_heap_stack :
- {
- . = ALIGN(4);
- PROVIDE ( end = . );
- PROVIDE ( _end = . );
- PROVIDE ( __end__ = .);
- . = . + _Min_Heap_Size;
- . = . + _Min_Stack_Size;
- . = ALIGN(4);
- } >RAM
-
-
-
- /* Remove information from the standard libraries */
- /DISCARD/ :
- {
- libc.a ( * )
- libm.a ( * )
- libgcc.a ( * )
- }
-
- .ARM.attributes 0 : { *(.ARM.attributes) }
-}
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/hal_tick.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_lcd.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_spi_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/stm32l1xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_GCC_ARM/system_stm32l1xx.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/hal_tick.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/startup_stm32l152xe.o has changed
--- a/TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l152xe.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l152xe.icf Tue Feb 03 15:31:20 2015 +0000
@@ -15,8 +15,8 @@
define region RAM_region = mem:[from __region_RAM_start__ to __region_RAM_end__];
/* Stack and Heap */
-define symbol __size_cstack__ = 0x400;
-define symbol __size_heap__ = 0x400;
+define symbol __size_cstack__ = 0x1000;
+define symbol __size_heap__ = 0x1000;
define block CSTACK with alignment = 8, size = __size_cstack__ { };
define block HEAP with alignment = 8, size = __size_heap__ { };
define block STACKHEAP with fixed order { block HEAP, block CSTACK };
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_adc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_adc_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_comp.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_cortex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_crc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_cryp.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_cryp_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_dac.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_dac_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_dma.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_flash.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_flash_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_flash_ramfunc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_gpio.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_i2c.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_i2s.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_irda.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_iwdg.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_lcd.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_nor.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_opamp.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_opamp_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_pcd.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_pcd_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_pwr.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_pwr_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_rcc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_rcc_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_rtc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_rtc_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_sd.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_smartcard.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_spi.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_spi_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_sram.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_tim.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_tim_ex.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_uart.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_usart.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_hal_wwdg.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_ll_fsmc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/stm32l1xx_ll_sdmmc.o has changed
Binary file TARGET_NUCLEO_L152RE/TOOLCHAIN_IAR/system_stm32l1xx.o has changed
--- a/TARGET_OC_MBUINO/TARGET_NXP/TARGET_LPC11UXX/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_OC_MBUINO/TARGET_NXP/TARGET_LPC11UXX/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -45,6 +45,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_OC_MBUINO/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_ARM_MICRO/startup_LPC11xx.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_ARM_MICRO/system_LPC11Uxx.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_ARM_STD/startup_LPC11xx.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_ARM_STD/system_LPC11Uxx.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_GCC_ARM/system_LPC11Uxx.o has changed
--- a/TARGET_OC_MBUINO/TOOLCHAIN_IAR/LPC11U24.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_OC_MBUINO/TOOLCHAIN_IAR/LPC11U24.icf Tue Feb 03 15:31:20 2015 +0000
@@ -6,7 +6,9 @@
/*-Memory Regions-*/
define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
define symbol __ICFEDIT_region_ROM_end__ = 0x00007FFF;
-define symbol __ICFEDIT_region_RAM_start__ = 0x10000000;
+define symbol __ICFEDIT_region_NVIC_start__ = 0x10000000;
+define symbol __ICFEDIT_region_NVIC_end__ = 0x100000BF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x100000C0;
define symbol __ICFEDIT_region_RAM_end__ = 0x10001FDF;
/*-Sizes-*/
define symbol __ICFEDIT_size_cstack__ = 0x400;
@@ -34,6 +36,6 @@
place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
place in ROM_region { readonly };
place in RAM_region { readwrite,
- block CSTACK, block HEAP };
+ block HEAP, block CSTACK };
place in CRP_region { section .crp };
place in URAM_region { section USB_PACKET_MEMORY };
Binary file TARGET_OC_MBUINO/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_IAR/startup_LPC11xx.o has changed
Binary file TARGET_OC_MBUINO/TOOLCHAIN_IAR/system_LPC11Uxx.o has changed
--- a/TARGET_RBLAB_BLENANO/TARGET_NORDIC/TARGET_MCU_NRF51822/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_RBLAB_BLENANO/TARGET_NORDIC/TARGET_MCU_NRF51822/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -45,6 +45,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_RBLAB_BLENANO/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_RBLAB_BLENANO/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_RBLAB_BLENANO/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_RBLAB_BLENANO/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_RBLAB_BLENANO/TOOLCHAIN_ARM_STD/startup_nRF51822.o has changed
Binary file TARGET_RBLAB_BLENANO/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_RBLAB_BLENANO/TOOLCHAIN_ARM_STD/system_nrf51822.o has changed
Binary file TARGET_RBLAB_BLENANO/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_RBLAB_BLENANO/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_RBLAB_BLENANO/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_RBLAB_BLENANO/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_RBLAB_BLENANO/TOOLCHAIN_GCC_ARM/system_nrf51822.o has changed
--- a/TARGET_RBLAB_BLENANO/nrf51.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_RBLAB_BLENANO/nrf51.h Tue Feb 03 15:31:20 2015 +0000 @@ -376,7 +376,8 @@ __IO uint32_t EVENTS_RXTO; /*!< Receiver timeout. */ __I uint32_t RESERVED5[46]; __IO uint32_t SHORTS; /*!< Shortcuts for TWI. */ - __I uint32_t RESERVED6[64]; + __I uint32_t RESERVED6[63]; + __IO uint32_t INTEN; /*!< Interrupt enable register. */ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ __I uint32_t RESERVED7[93]; @@ -1213,4 +1214,3 @@ #endif /* nRF51_H */ -
--- a/TARGET_RBLAB_NRF51822/TARGET_NORDIC/TARGET_MCU_NRF51822/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_RBLAB_NRF51822/TARGET_NORDIC/TARGET_MCU_NRF51822/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -45,6 +45,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_RBLAB_NRF51822/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_RBLAB_NRF51822/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_RBLAB_NRF51822/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_RBLAB_NRF51822/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_RBLAB_NRF51822/TOOLCHAIN_ARM_STD/startup_nRF51822.o has changed
Binary file TARGET_RBLAB_NRF51822/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_RBLAB_NRF51822/TOOLCHAIN_ARM_STD/system_nrf51822.o has changed
Binary file TARGET_RBLAB_NRF51822/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_RBLAB_NRF51822/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_RBLAB_NRF51822/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_RBLAB_NRF51822/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_RBLAB_NRF51822/TOOLCHAIN_GCC_ARM/system_nrf51822.o has changed
--- a/TARGET_RBLAB_NRF51822/nrf51.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_RBLAB_NRF51822/nrf51.h Tue Feb 03 15:31:20 2015 +0000 @@ -376,7 +376,8 @@ __IO uint32_t EVENTS_RXTO; /*!< Receiver timeout. */ __I uint32_t RESERVED5[46]; __IO uint32_t SHORTS; /*!< Shortcuts for TWI. */ - __I uint32_t RESERVED6[64]; + __I uint32_t RESERVED6[63]; + __IO uint32_t INTEN; /*!< Interrupt enable register. */ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ __I uint32_t RESERVED7[93]; @@ -1213,4 +1214,3 @@ #endif /* nRF51_H */ -
--- a/TARGET_RZ_A1H/TARGET_RENESAS/TARGET_RZ_A1H/PeripheralNames.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_RZ_A1H/TARGET_RENESAS/TARGET_RZ_A1H/PeripheralNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -28,6 +28,10 @@
UART1,
UART2,
UART3,
+ UART4,
+ UART5,
+ UART6,
+ UART7,
} UARTName;
// PWMType & 1 == 1 then have to use PWDTR[12] == 1
@@ -50,16 +54,20 @@
PWM2H,
} PWMType;
-#define PTM_SHIFT 8
typedef enum {
- PWM0_PIN = (1 << PTM_SHIFT) | PWM2E, // LED_R (through MTU2) TIOC4A [T.B.D]
- PWM1_PIN = (0 << PTM_SHIFT) | PWM2F, // LED_G
- PWM2_PIN = (0 << PTM_SHIFT) | PWM2G, // LED_B
- PWM3_PIN = (0 << PTM_SHIFT) | PWM2H, // LED_USER (not explicitly supported)
- PWM4_PIN = (0 << PTM_SHIFT) | PWM1G, // D9
- PWM5_PIN = (0 << PTM_SHIFT) | PWM1H, // D8 not explicitly supported
- PWM6_PIN = (0 << PTM_SHIFT) | PWM1F, // D7 not explicitly supported
- PWM7_PIN = (0 << PTM_SHIFT) | PWM1D, // D6
+ PWM0_PIN,
+ PWM1_PIN,
+ PWM2_PIN,
+ PWM3_PIN,
+ PWM4_PIN,
+ PWM5_PIN,
+ PWM6_PIN,
+ PWM7_PIN,
+ PWM8_PIN,
+ PWM9_PIN,
+ PWM10_PIN,
+ PWM11_PIN,
+ PWM12_PIN,
} PWMName;
typedef enum {
@@ -76,6 +84,7 @@
typedef enum {
SPI_0 = 0,
SPI_1,
+ SPI_2,
} SPIName;
typedef enum {
@@ -88,7 +97,7 @@
#define STDIO_UART_TX USBTX
#define STDIO_UART_RX USBRX
-#define STDIO_UART P_SCIF2
+#define STDIO_UART UART2
// Default peripherals
#define MBED_SPI0 p5, p6, p7, p8
--- a/TARGET_RZ_A1H/TARGET_RENESAS/TARGET_RZ_A1H/PinNames.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_RZ_A1H/TARGET_RENESAS/TARGET_RZ_A1H/PinNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -57,7 +57,7 @@
// Other mbed Pin Names
LED1 = P4_4,
- LED2 = P4_5,
+ LED2 = P3_2,
LED3 = P4_6,
LED4 = P4_7,
@@ -97,6 +97,9 @@
I2C_SCL = D15,
I2C_SDA = D14,
+ USER_BUTTON0 = P6_0,
+ USER_BUTTON1 = P6_1,
+
// Not connected
NC = (int)0xFFFFFFFF
} PinName;
--- a/TARGET_RZ_A1H/TARGET_RENESAS/TARGET_RZ_A1H/device.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_RZ_A1H/TARGET_RENESAS/TARGET_RZ_A1H/device.h Tue Feb 03 15:31:20 2015 +0000 @@ -16,6 +16,14 @@ #ifndef MBED_DEVICE_H #define MBED_DEVICE_H +/* ->Take measures about optimization problems of web compiler */ + /* Web compiler has problem that inlining code may not be generated correctly */ + /* when "-O3 -Otime" was specified. */ +#if defined(__arm__) && (__ARMCC_VERSION <= 5040027) +#pragma Ospace +#endif +/* <-Take measures about optimization problems of web compiler */ + #define DEVICE_PORTIN 1 #define DEVICE_PORTOUT 1 #define DEVICE_PORTINOUT 1 @@ -36,7 +44,7 @@ #define DEVICE_CAN 0 -#define DEVICE_RTC 0 +#define DEVICE_RTC 1 #define DEVICE_ETHERNET 1
--- a/TARGET_RZ_A1H/TARGET_RENESAS/TARGET_RZ_A1H/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_RZ_A1H/TARGET_RENESAS/TARGET_RZ_A1H/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -16,6 +16,8 @@
#ifndef MBED_GPIO_OBJECT_H
#define MBED_GPIO_OBJECT_H
+#include "mbed_assert.h"
+
#ifdef __cplusplus
extern "C" {
#endif
@@ -41,6 +43,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
--- a/TARGET_RZ_A1H/TARGET_RENESAS/TARGET_RZ_A1H/objects.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_RZ_A1H/TARGET_RENESAS/TARGET_RZ_A1H/objects.h Tue Feb 03 15:31:20 2015 +0000
@@ -22,6 +22,7 @@
#include "PeripheralNames.h"
#include "PinNames.h"
#include "gpio_object.h"
+#include "rspi_iodefine.h"
#ifdef __cplusplus
extern "C" {
@@ -30,16 +31,23 @@
struct i2c_s {
uint32_t i2c;
uint32_t dummy;
+ uint8_t pclk_bit;
+ uint8_t width_low;
+ uint8_t width_hi;
+ int bbsy_wait_cnt;
+ int last_stop_flag;
};
struct spi_s {
- uint32_t spi;
+ struct st_rspi *spi;
+ uint32_t bits;
};
struct gpio_irq_s {
uint32_t port;
uint32_t pin;
uint32_t ch;
+ uint8_t int_enable;
};
struct port_s {
@@ -56,9 +64,7 @@
};
struct pwmout_s {
- __IO uint16_t *MR;
- __IO uint16_t *CY;
- uint16_t flag;
+ uint32_t ch;
PWMName pwm;
};
--- a/TARGET_RZ_A1H/TOOLCHAIN_ARM_STD/MBRZA1H.sct Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_RZ_A1H/TOOLCHAIN_ARM_STD/MBRZA1H.sct Tue Feb 03 15:31:20 2015 +0000
@@ -24,13 +24,13 @@
* (+RO-CODE) ; Application RO code (.text)
}
- RO_DATA +0
+ RO_DATA +0
{ * (+RO-DATA) } ; Application RO data (.constdata)
- RW_DATA 0x20600000 0x00100000 ; Page 1 of On-Chip Large-Capacity RAM (0x20060000 to 0x206FFFFF)
+ RW_DATA 0x20020000
{ * (+RW) } ; Application RW data (.data)
- ZI_DATA 0x20100000 0x00100000 ; Page 1 of On-Chip Large-Capacity RAM (0x20010000 to 0x201FFFFF)
+ ZI_DATA +0 ALIGN 0x400
{ * (+ZI) } ; Application ZI data (.bss)
RW_DATA_NC 0x60900000 0x00100000
@@ -38,9 +38,6 @@
ZI_DATA_NC +0
{ * (NC_BSS) } ; Application ZI data Non cached area
-
- ;HEAP 0x90000000
- ;{ * (HEAP) }
}
Binary file TARGET_RZ_A1H/TOOLCHAIN_ARM_STD/RZ_A1_Init.o has changed
Binary file TARGET_RZ_A1H/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_RZ_A1H/TOOLCHAIN_ARM_STD/gic.o has changed
Binary file TARGET_RZ_A1H/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_RZ_A1H/TOOLCHAIN_ARM_STD/mbed_sf_boot.o has changed
Binary file TARGET_RZ_A1H/TOOLCHAIN_ARM_STD/mmu_Renesas_RZ_A1.o has changed
Binary file TARGET_RZ_A1H/TOOLCHAIN_ARM_STD/pl310.o has changed
Binary file TARGET_RZ_A1H/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_RZ_A1H/TOOLCHAIN_ARM_STD/rza_io_regrw.o has changed
Binary file TARGET_RZ_A1H/TOOLCHAIN_ARM_STD/startup_MBRZA1H.o has changed
Binary file TARGET_RZ_A1H/TOOLCHAIN_ARM_STD/system_MBRZA1H.o has changed
--- a/TARGET_SSCI824/TARGET_NXP/TARGET_LPC82X/TARGET_SSCI824/PeripheralNames.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_SSCI824/TARGET_NXP/TARGET_LPC82X/TARGET_SSCI824/PeripheralNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -30,7 +30,7 @@
#define MBED_UART0 P0_7, P0_18
#define MBED_UARTUSB USBTX, USBRX
-#define MBED_I2C0 P0_10, P0_11
+#define MBED_I2C0 P0_11, P0_10
typedef enum {
ADC_0 = 0,
--- a/TARGET_SSCI824/TARGET_NXP/TARGET_LPC82X/TARGET_SSCI824/PinNames.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_SSCI824/TARGET_NXP/TARGET_LPC82X/TARGET_SSCI824/PinNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -102,10 +102,10 @@
USBRX = P0_18,
// I2C pins
- SDA = P0_10,
- SCL = P0_11,
- I2C_SDA = P0_10,
- I2C_SCL = P0_11,
+ SCL = P0_10,
+ SDA = P0_11,
+ I2C_SCL = P0_10,
+ I2C_SDA = P0_11,
// Not connected
NC = (int)0xFFFFFFFF,
--- a/TARGET_SSCI824/TARGET_NXP/TARGET_LPC82X/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_SSCI824/TARGET_NXP/TARGET_LPC82X/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -47,6 +47,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_SSCI824/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_SSCI824/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_SSCI824/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_SSCI824/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_SSCI824/TOOLCHAIN_ARM_MICRO/startup_LPC8xx.o has changed
Binary file TARGET_SSCI824/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_SSCI824/TOOLCHAIN_ARM_MICRO/system_LPC8xx.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_TEENSY3_1/MK20DX256.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,6032 @@
+/*
+** ###################################################################
+** Processors: MK20DX64VLH7
+** MK20DX128VLH7
+** MK20DX256VLH7
+** MK20DX64VLK7
+** MK20DX128VLK7
+** MK20DX256VLK7
+** MK20DX128VLL7
+** MK20DX256VLL7
+** MK20DX64VMB7
+** MK20DX128VMB7
+** MK20DX256VMB7
+** MK20DX128VML7
+** MK20DX256VML7
+**
+** Compilers: ARM Compiler
+** Freescale C/C++ for Embedded ARM
+** GNU C Compiler
+** IAR ANSI C/C++ Compiler for ARM
+**
+** Reference manual: Kxx (P1 silicon) Sub-Family Reference Manual Rev. 0, draft A Oct 2011
+** Version: rev. 1.0, 2012-01-15
+**
+** Abstract:
+** Provides a system configuration function and a global variable that
+** contains the system frequency. It configures the device and initializes
+** the oscillator (PLL) that is part of the microcontroller device.
+**
+** Copyright: 2015 Freescale Semiconductor, Inc. All Rights Reserved.
+**
+** http: www.freescale.com
+** mail: support@freescale.com
+**
+** Revisions:
+** - rev. 1.0 (2012-01-15)
+** Initial public version.
+**
+** ###################################################################
+*/
+
+/**
+ * @file MK20DX256.h
+ * @version 2.0
+ * @date 2012-03-19
+ * @brief CMSIS Peripheral Access Layer for MK20DX256
+ *
+ * CMSIS Peripheral Access Layer for MK20DX256
+ */
+
+#if !defined(MK20DX256_H_)
+#define MK20DX256_H_ /**< Symbol preventing repeated inclusion */
+#define MCU_MK20DX256
+/** Memory map major version (memory maps with equal major version number are
+ * compatible) */
+#define MCU_MEM_MAP_VERSION 0x0200u
+/** Memory map minor version */
+#define MCU_MEM_MAP_VERSION_MINOR 0x0000u
+
+/**
+ * @brief Macro to access a single bit of a peripheral register (bit band region
+ * 0x40000000 to 0x400FFFFF) using the bit-band alias region access.
+ * @param Reg Register to access.
+ * @param Bit Bit number to access.
+ * @return Value of the targeted bit in the bit band region.
+ */
+#define BITBAND_REG(Reg,Bit) (*((uint32_t volatile*)(0x42000000u + (32u*((uint32_t)&(Reg) - (uint32_t)0x40000000u)) + (4u*((uint32_t)(Bit))))))
+
+/* ----------------------------------------------------------------------------
+ -- Interrupt vector numbers
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup Interrupt_vector_numbers Interrupt vector numbers
+ * @{
+ */
+
+/** Interrupt Number Definitions */
+typedef enum IRQn {
+ /* Core interrupts */
+ NonMaskableInt_IRQn = -14, /**< Non Maskable Interrupt */
+ MemoryManagement_IRQn = -12, /**< Cortex-M4 Memory Management Interrupt */
+ BusFault_IRQn = -11, /**< Cortex-M4 Bus Fault Interrupt */
+ UsageFault_IRQn = -10, /**< Cortex-M4 Usage Fault Interrupt */
+ SVCall_IRQn = -5, /**< Cortex-M4 SV Call Interrupt */
+ DebugMonitor_IRQn = -4, /**< Cortex-M4 Debug Monitor Interrupt */
+ PendSV_IRQn = -2, /**< Cortex-M4 Pend SV Interrupt */
+ SysTick_IRQn = -1, /**< Cortex-M4 System Tick Interrupt */
+
+ /* Device specific interrupts */
+
+ DMA0_IRQn = 0, /**< DMA channel 0 transfer complete interrupt */
+ DMA1_IRQn = 1, /**< DMA channel 1 transfer complete interrupt */
+ DMA2_IRQn = 2, /**< DMA channel 2 transfer complete interrupt */
+ DMA3_IRQn = 3, /**< DMA channel 3 transfer complete interrupt */
+ DMA4_IRQn = 4,
+ DMA5_IRQn = 5,
+ DMA6_IRQn = 6,
+ DMA7_IRQn = 7,
+ DMA8_IRQn = 8,
+ DMA9_IRQn = 9,
+ DMA10_IRQn = 10,
+ DMA11_IRQn = 11,
+ DMA12_IRQn = 12,
+ DMA13_IRQn = 13,
+ DMA14_IRQn = 14,
+ DMA15_IRQn = 15,
+ DMA_Error_IRQn = 16, /**< DMA error interrupt */
+ Reserved33_IRQn = 17,
+ FTFL_IRQn = 18, /**< FTFL interrupt */
+ Read_Collision_IRQn = 19, /**< Read collision interrupt */
+ LVD_LVW_IRQn = 20, /**< Low Voltage Detect, Low Voltage Warning */
+ LLW_IRQn = 21, /**< Low Leakage Wakeup */
+ Watchdog_IRQn = 22, /**< WDOG interrupt */
+ Reserved39_IRQn = 23,
+ I2C0_IRQn = 24, /**< I2C0 interrupt */
+ I2C1_IRQn = 25,
+ SPI0_IRQn = 26, /**< SPI0 interrupt */
+ SPI1_IRQn = 27,
+ Reserved44_IRQn = 28,
+ CAN0_ORed_Message_buffer_IRQn = 29, /**< CAN0 OR'd message buffers interrupt */
+ CAN0_Bus_Off_IRQn = 30, /**< CAN0 bus off interrupt */
+ CAN0_Error_IRQn = 31, /**< CAN0 error interrupt */
+ CAN0_Tx_Warning_IRQn = 32, /**< CAN0 Tx warning interrupt */
+ CAN0_Rx_Warning_IRQn = 33, /**< CAN0 Rx warning interrupt */
+ CAN0_Wake_Up_IRQn = 34, /**< CAN0 wake up interrupt */
+ I2S0_Tx_IRQn = 35, /**< I2S0 transmit interrupt */
+ I2S0_Rx_IRQn = 36, /**< I2S0 receive interrupt */
+ Reserved53_IRQn = 37,
+ Reserved54_IRQn = 38,
+ Reserved55_IRQn = 39,
+ Reserved56_IRQn = 40,
+ Reserved57_IRQn = 41,
+ Reserved58_IRQn = 42,
+ Reserved59_IRQn = 43,
+ UART0_LON_IRQn = 44, /**< UART0 LON interrupt */
+ UART0_RX_TX_IRQn = 45, /**< UART0 receive/transmit interrupt */
+ UART0_ERR_IRQn = 46, /**< UART0 error interrupt */
+ UART1_RX_TX_IRQn = 47, /**< UART1 receive/transmit interrupt */
+ UART1_ERR_IRQn = 48, /**< UART1 error interrupt */
+ UART2_RX_TX_IRQn = 49, /**< UART2 receive/transmit interrupt */
+ UART2_ERR_IRQn = 50, /**< UART2 error interrupt */
+ Reserved67_IRQn = 51,
+ Reserved68_IRQn = 52,
+ Reserved69_IRQn = 53,
+ Reserved70_IRQn = 54,
+ Reserved71_IRQn = 55,
+ Reserved72_IRQn = 56,
+ ADC0_IRQn = 57, /**< ADC0 interrupt */
+ ADC1_IRQn = 58,
+ CMP0_IRQn = 59, /**< CMP0 interrupt */
+ CMP1_IRQn = 60, /**< CMP1 interrupt */
+ CMP2_IRQn = 61,
+ FTM0_IRQn = 62, /**< FTM0 fault, overflow and channels interrupt */
+ FTM1_IRQn = 63, /**< FTM1 fault, overflow and channels interrupt */
+ FTM2_IRQn = 64,
+ CMT_IRQn = 65, /**< CMT interrupt */
+ RTC_IRQn = 66, /**< RTC interrupt */
+ RTC_Seconds_IRQn = 67, /**< RTC seconds interrupt */
+ PIT0_IRQn = 68, /**< PIT timer channel 0 interrupt */
+ PIT1_IRQn = 69, /**< PIT timer channel 1 interrupt */
+ PIT2_IRQn = 70, /**< PIT timer channel 2 interrupt */
+ PIT3_IRQn = 71, /**< PIT timer channel 3 interrupt */
+ PDB0_IRQn = 72, /**< PDB0 interrupt */
+ USB0_IRQn = 73, /**< USB0 interrupt */
+ USBDCD_IRQn = 74, /**< USBDCD interrupt */
+ Reserved91_IRQn = 75,
+ Reserved92_IRQn = 76,
+ Reserved93_IRQn = 77,
+ Reserved94_IRQn = 78,
+ Reserved95_IRQn = 79,
+ Reserved96_IRQn = 80,
+ DAC0_IRQn = 81,
+ Reserved98_IRQn = 82,
+ TSI0_IRQn = 83, /**< TSI0 interrupt */
+ MCG_IRQn = 84, /**< MCG interrupt */
+ LPTimer_IRQn = 85, /**< LPTimer interrupt */
+ Reserved102_IRQn = 86,
+ PORTA_IRQn = 87, /**< Port A interrupt */
+ PORTB_IRQn = 88, /**< Port B interrupt */
+ PORTC_IRQn = 89, /**< Port C interrupt */
+ PORTD_IRQn = 90, /**< Port D interrupt */
+ PORTE_IRQn = 91, /**< Port E interrupt */
+ Reserved108_IRQn = 92,
+ Reserved109_IRQn = 93,
+ SWI_IRQn = 94 /**< Software interrupt */
+
+} IRQn_Type;
+
+/**
+ * @}
+ */ /* end of group Interrupt_vector_numbers */
+
+
+/* ----------------------------------------------------------------------------
+ -- Cortex M4 Core Configuration
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup Cortex_Core_Configuration Cortex M4 Core Configuration
+ * @{
+ */
+
+#define __MPU_PRESENT 0 /**< Defines if an MPU is present or not */
+#define __NVIC_PRIO_BITS 4 /**< Number of priority bits implemented in the NVIC */
+#define __Vendor_SysTickConfig 0 /**< Vendor specific implementation of SysTickConfig is defined */
+
+#include "core_cm4.h" /* Core Peripheral Access Layer */
+#include "system_MK20DX256.h" /* Device specific configuration file */
+
+/**
+ * @}
+ */ /* end of group Cortex_Core_Configuration */
+
+
+/* ----------------------------------------------------------------------------
+ -- Device Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup Peripheral_access_layer Device Peripheral Access Layer
+ * @{
+ */
+
+
+/*
+** Start of section using anonymous unions
+*/
+
+#if defined(__ARMCC_VERSION)
+ #pragma push
+ #pragma anon_unions
+#elif defined(__CWCC__)
+ #pragma push
+ #pragma cpp_extensions on
+#elif defined(__GNUC__)
+ /* anonymous unions are enabled by default */
+#elif defined(__IAR_SYSTEMS_ICC__)
+ #pragma language=extended
+#else
+ #error Not supported compiler type
+#endif
+
+/* ----------------------------------------------------------------------------
+ -- ADC Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup ADC_Peripheral_Access_Layer ADC Peripheral Access Layer
+ * @{
+ */
+
+/** ADC - Register Layout Typedef */
+typedef struct {
+ __IO uint32_t SC1[2]; /**< ADC status and control registers 1, array offset: 0x0, array step: 0x4 */
+ __IO uint32_t CFG1; /**< ADC configuration register 1, offset: 0x8 */
+ __IO uint32_t CFG2; /**< Configuration register 2, offset: 0xC */
+ __I uint32_t R[2]; /**< ADC data result register, array offset: 0x10, array step: 0x4 */
+ __IO uint32_t CV1; /**< Compare value registers, offset: 0x18 */
+ __IO uint32_t CV2; /**< Compare value registers, offset: 0x1C */
+ __IO uint32_t SC2; /**< Status and control register 2, offset: 0x20 */
+ __IO uint32_t SC3; /**< Status and control register 3, offset: 0x24 */
+ __IO uint32_t OFS; /**< ADC offset correction register, offset: 0x28 */
+ __IO uint32_t PG; /**< ADC plus-side gain register, offset: 0x2C */
+ __IO uint32_t MG; /**< ADC minus-side gain register, offset: 0x30 */
+ __IO uint32_t CLPD; /**< ADC plus-side general calibration value register, offset: 0x34 */
+ __IO uint32_t CLPS; /**< ADC plus-side general calibration value register, offset: 0x38 */
+ __IO uint32_t CLP4; /**< ADC plus-side general calibration value register, offset: 0x3C */
+ __IO uint32_t CLP3; /**< ADC plus-side general calibration value register, offset: 0x40 */
+ __IO uint32_t CLP2; /**< ADC plus-side general calibration value register, offset: 0x44 */
+ __IO uint32_t CLP1; /**< ADC plus-side general calibration value register, offset: 0x48 */
+ __IO uint32_t CLP0; /**< ADC plus-side general calibration value register, offset: 0x4C */
+ uint8_t RESERVED_0[4];
+ __IO uint32_t CLMD; /**< ADC minus-side general calibration value register, offset: 0x54 */
+ __IO uint32_t CLMS; /**< ADC minus-side general calibration value register, offset: 0x58 */
+ __IO uint32_t CLM4; /**< ADC minus-side general calibration value register, offset: 0x5C */
+ __IO uint32_t CLM3; /**< ADC minus-side general calibration value register, offset: 0x60 */
+ __IO uint32_t CLM2; /**< ADC minus-side general calibration value register, offset: 0x64 */
+ __IO uint32_t CLM1; /**< ADC minus-side general calibration value register, offset: 0x68 */
+ __IO uint32_t CLM0; /**< ADC minus-side general calibration value register, offset: 0x6C */
+} ADC_Type;
+
+/* ----------------------------------------------------------------------------
+ -- ADC Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup ADC_Register_Masks ADC Register Masks
+ * @{
+ */
+
+/* SC1 Bit Fields */
+#define ADC_SC1_ADCH_MASK 0x1Fu
+#define ADC_SC1_ADCH_SHIFT 0
+#define ADC_SC1_ADCH(x) (((uint32_t)(((uint32_t)(x))<<ADC_SC1_ADCH_SHIFT))&ADC_SC1_ADCH_MASK)
+#define ADC_SC1_DIFF_MASK 0x20u
+#define ADC_SC1_DIFF_SHIFT 5
+#define ADC_SC1_AIEN_MASK 0x40u
+#define ADC_SC1_AIEN_SHIFT 6
+#define ADC_SC1_COCO_MASK 0x80u
+#define ADC_SC1_COCO_SHIFT 7
+/* CFG1 Bit Fields */
+#define ADC_CFG1_ADICLK_MASK 0x3u
+#define ADC_CFG1_ADICLK_SHIFT 0
+#define ADC_CFG1_ADICLK(x) (((uint32_t)(((uint32_t)(x))<<ADC_CFG1_ADICLK_SHIFT))&ADC_CFG1_ADICLK_MASK)
+#define ADC_CFG1_MODE_MASK 0xCu
+#define ADC_CFG1_MODE_SHIFT 2
+#define ADC_CFG1_MODE(x) (((uint32_t)(((uint32_t)(x))<<ADC_CFG1_MODE_SHIFT))&ADC_CFG1_MODE_MASK)
+#define ADC_CFG1_ADLSMP_MASK 0x10u
+#define ADC_CFG1_ADLSMP_SHIFT 4
+#define ADC_CFG1_ADIV_MASK 0x60u
+#define ADC_CFG1_ADIV_SHIFT 5
+#define ADC_CFG1_ADIV(x) (((uint32_t)(((uint32_t)(x))<<ADC_CFG1_ADIV_SHIFT))&ADC_CFG1_ADIV_MASK)
+#define ADC_CFG1_ADLPC_MASK 0x80u
+#define ADC_CFG1_ADLPC_SHIFT 7
+/* CFG2 Bit Fields */
+#define ADC_CFG2_ADLSTS_MASK 0x3u
+#define ADC_CFG2_ADLSTS_SHIFT 0
+#define ADC_CFG2_ADLSTS(x) (((uint32_t)(((uint32_t)(x))<<ADC_CFG2_ADLSTS_SHIFT))&ADC_CFG2_ADLSTS_MASK)
+#define ADC_CFG2_ADHSC_MASK 0x4u
+#define ADC_CFG2_ADHSC_SHIFT 2
+#define ADC_CFG2_ADACKEN_MASK 0x8u
+#define ADC_CFG2_ADACKEN_SHIFT 3
+#define ADC_CFG2_MUXSEL_MASK 0x10u
+#define ADC_CFG2_MUXSEL_SHIFT 4
+/* R Bit Fields */
+#define ADC_R_D_MASK 0xFFFFu
+#define ADC_R_D_SHIFT 0
+#define ADC_R_D(x) (((uint32_t)(((uint32_t)(x))<<ADC_R_D_SHIFT))&ADC_R_D_MASK)
+/* CV1 Bit Fields */
+#define ADC_CV1_CV_MASK 0xFFFFu
+#define ADC_CV1_CV_SHIFT 0
+#define ADC_CV1_CV(x) (((uint32_t)(((uint32_t)(x))<<ADC_CV1_CV_SHIFT))&ADC_CV1_CV_MASK)
+/* CV2 Bit Fields */
+#define ADC_CV2_CV_MASK 0xFFFFu
+#define ADC_CV2_CV_SHIFT 0
+#define ADC_CV2_CV(x) (((uint32_t)(((uint32_t)(x))<<ADC_CV2_CV_SHIFT))&ADC_CV2_CV_MASK)
+/* SC2 Bit Fields */
+#define ADC_SC2_REFSEL_MASK 0x3u
+#define ADC_SC2_REFSEL_SHIFT 0
+#define ADC_SC2_REFSEL(x) (((uint32_t)(((uint32_t)(x))<<ADC_SC2_REFSEL_SHIFT))&ADC_SC2_REFSEL_MASK)
+#define ADC_SC2_DMAEN_MASK 0x4u
+#define ADC_SC2_DMAEN_SHIFT 2
+#define ADC_SC2_ACREN_MASK 0x8u
+#define ADC_SC2_ACREN_SHIFT 3
+#define ADC_SC2_ACFGT_MASK 0x10u
+#define ADC_SC2_ACFGT_SHIFT 4
+#define ADC_SC2_ACFE_MASK 0x20u
+#define ADC_SC2_ACFE_SHIFT 5
+#define ADC_SC2_ADTRG_MASK 0x40u
+#define ADC_SC2_ADTRG_SHIFT 6
+#define ADC_SC2_ADACT_MASK 0x80u
+#define ADC_SC2_ADACT_SHIFT 7
+/* SC3 Bit Fields */
+#define ADC_SC3_AVGS_MASK 0x3u
+#define ADC_SC3_AVGS_SHIFT 0
+#define ADC_SC3_AVGS(x) (((uint32_t)(((uint32_t)(x))<<ADC_SC3_AVGS_SHIFT))&ADC_SC3_AVGS_MASK)
+#define ADC_SC3_AVGE_MASK 0x4u
+#define ADC_SC3_AVGE_SHIFT 2
+#define ADC_SC3_ADCO_MASK 0x8u
+#define ADC_SC3_ADCO_SHIFT 3
+#define ADC_SC3_CALF_MASK 0x40u
+#define ADC_SC3_CALF_SHIFT 6
+#define ADC_SC3_CAL_MASK 0x80u
+#define ADC_SC3_CAL_SHIFT 7
+/* OFS Bit Fields */
+#define ADC_OFS_OFS_MASK 0xFFFFu
+#define ADC_OFS_OFS_SHIFT 0
+#define ADC_OFS_OFS(x) (((uint32_t)(((uint32_t)(x))<<ADC_OFS_OFS_SHIFT))&ADC_OFS_OFS_MASK)
+/* PG Bit Fields */
+#define ADC_PG_PG_MASK 0xFFFFu
+#define ADC_PG_PG_SHIFT 0
+#define ADC_PG_PG(x) (((uint32_t)(((uint32_t)(x))<<ADC_PG_PG_SHIFT))&ADC_PG_PG_MASK)
+/* MG Bit Fields */
+#define ADC_MG_MG_MASK 0xFFFFu
+#define ADC_MG_MG_SHIFT 0
+#define ADC_MG_MG(x) (((uint32_t)(((uint32_t)(x))<<ADC_MG_MG_SHIFT))&ADC_MG_MG_MASK)
+/* CLPD Bit Fields */
+#define ADC_CLPD_CLPD_MASK 0x3Fu
+#define ADC_CLPD_CLPD_SHIFT 0
+#define ADC_CLPD_CLPD(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLPD_CLPD_SHIFT))&ADC_CLPD_CLPD_MASK)
+/* CLPS Bit Fields */
+#define ADC_CLPS_CLPS_MASK 0x3Fu
+#define ADC_CLPS_CLPS_SHIFT 0
+#define ADC_CLPS_CLPS(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLPS_CLPS_SHIFT))&ADC_CLPS_CLPS_MASK)
+/* CLP4 Bit Fields */
+#define ADC_CLP4_CLP4_MASK 0x3FFu
+#define ADC_CLP4_CLP4_SHIFT 0
+#define ADC_CLP4_CLP4(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLP4_CLP4_SHIFT))&ADC_CLP4_CLP4_MASK)
+/* CLP3 Bit Fields */
+#define ADC_CLP3_CLP3_MASK 0x1FFu
+#define ADC_CLP3_CLP3_SHIFT 0
+#define ADC_CLP3_CLP3(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLP3_CLP3_SHIFT))&ADC_CLP3_CLP3_MASK)
+/* CLP2 Bit Fields */
+#define ADC_CLP2_CLP2_MASK 0xFFu
+#define ADC_CLP2_CLP2_SHIFT 0
+#define ADC_CLP2_CLP2(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLP2_CLP2_SHIFT))&ADC_CLP2_CLP2_MASK)
+/* CLP1 Bit Fields */
+#define ADC_CLP1_CLP1_MASK 0x7Fu
+#define ADC_CLP1_CLP1_SHIFT 0
+#define ADC_CLP1_CLP1(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLP1_CLP1_SHIFT))&ADC_CLP1_CLP1_MASK)
+/* CLP0 Bit Fields */
+#define ADC_CLP0_CLP0_MASK 0x3Fu
+#define ADC_CLP0_CLP0_SHIFT 0
+#define ADC_CLP0_CLP0(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLP0_CLP0_SHIFT))&ADC_CLP0_CLP0_MASK)
+/* CLMD Bit Fields */
+#define ADC_CLMD_CLMD_MASK 0x3Fu
+#define ADC_CLMD_CLMD_SHIFT 0
+#define ADC_CLMD_CLMD(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLMD_CLMD_SHIFT))&ADC_CLMD_CLMD_MASK)
+/* CLMS Bit Fields */
+#define ADC_CLMS_CLMS_MASK 0x3Fu
+#define ADC_CLMS_CLMS_SHIFT 0
+#define ADC_CLMS_CLMS(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLMS_CLMS_SHIFT))&ADC_CLMS_CLMS_MASK)
+/* CLM4 Bit Fields */
+#define ADC_CLM4_CLM4_MASK 0x3FFu
+#define ADC_CLM4_CLM4_SHIFT 0
+#define ADC_CLM4_CLM4(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLM4_CLM4_SHIFT))&ADC_CLM4_CLM4_MASK)
+/* CLM3 Bit Fields */
+#define ADC_CLM3_CLM3_MASK 0x1FFu
+#define ADC_CLM3_CLM3_SHIFT 0
+#define ADC_CLM3_CLM3(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLM3_CLM3_SHIFT))&ADC_CLM3_CLM3_MASK)
+/* CLM2 Bit Fields */
+#define ADC_CLM2_CLM2_MASK 0xFFu
+#define ADC_CLM2_CLM2_SHIFT 0
+#define ADC_CLM2_CLM2(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLM2_CLM2_SHIFT))&ADC_CLM2_CLM2_MASK)
+/* CLM1 Bit Fields */
+#define ADC_CLM1_CLM1_MASK 0x7Fu
+#define ADC_CLM1_CLM1_SHIFT 0
+#define ADC_CLM1_CLM1(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLM1_CLM1_SHIFT))&ADC_CLM1_CLM1_MASK)
+/* CLM0 Bit Fields */
+#define ADC_CLM0_CLM0_MASK 0x3Fu
+#define ADC_CLM0_CLM0_SHIFT 0
+#define ADC_CLM0_CLM0(x) (((uint32_t)(((uint32_t)(x))<<ADC_CLM0_CLM0_SHIFT))&ADC_CLM0_CLM0_MASK)
+
+/**
+ * @}
+ */ /* end of group ADC_Register_Masks */
+
+
+/* ADC - Peripheral instance base addresses */
+/** Peripheral ADC0 base address */
+#define ADC0_BASE (0x4003B000u)
+/** Peripheral ADC0 base pointer */
+#define ADC0 ((ADC_Type *)ADC0_BASE)
+
+/**
+ * @}
+ */ /* end of group ADC_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- CMP Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup CMP_Peripheral_Access_Layer CMP Peripheral Access Layer
+ * @{
+ */
+
+/** CMP - Register Layout Typedef */
+typedef struct {
+ __IO uint8_t CR0; /**< CMP Control Register 0, offset: 0x0 */
+ __IO uint8_t CR1; /**< CMP Control Register 1, offset: 0x1 */
+ __IO uint8_t FPR; /**< CMP Filter Period Register, offset: 0x2 */
+ __IO uint8_t SCR; /**< CMP Status and Control Register, offset: 0x3 */
+ __IO uint8_t DACCR; /**< DAC Control Register, offset: 0x4 */
+ __IO uint8_t MUXCR; /**< MUX Control Register, offset: 0x5 */
+} CMP_Type;
+
+/* ----------------------------------------------------------------------------
+ -- CMP Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup CMP_Register_Masks CMP Register Masks
+ * @{
+ */
+
+/* CR0 Bit Fields */
+#define CMP_CR0_HYSTCTR_MASK 0x3u
+#define CMP_CR0_HYSTCTR_SHIFT 0
+#define CMP_CR0_HYSTCTR(x) (((uint8_t)(((uint8_t)(x))<<CMP_CR0_HYSTCTR_SHIFT))&CMP_CR0_HYSTCTR_MASK)
+#define CMP_CR0_FILTER_CNT_MASK 0x70u
+#define CMP_CR0_FILTER_CNT_SHIFT 4
+#define CMP_CR0_FILTER_CNT(x) (((uint8_t)(((uint8_t)(x))<<CMP_CR0_FILTER_CNT_SHIFT))&CMP_CR0_FILTER_CNT_MASK)
+/* CR1 Bit Fields */
+#define CMP_CR1_EN_MASK 0x1u
+#define CMP_CR1_EN_SHIFT 0
+#define CMP_CR1_OPE_MASK 0x2u
+#define CMP_CR1_OPE_SHIFT 1
+#define CMP_CR1_COS_MASK 0x4u
+#define CMP_CR1_COS_SHIFT 2
+#define CMP_CR1_INV_MASK 0x8u
+#define CMP_CR1_INV_SHIFT 3
+#define CMP_CR1_PMODE_MASK 0x10u
+#define CMP_CR1_PMODE_SHIFT 4
+#define CMP_CR1_WE_MASK 0x40u
+#define CMP_CR1_WE_SHIFT 6
+#define CMP_CR1_SE_MASK 0x80u
+#define CMP_CR1_SE_SHIFT 7
+/* FPR Bit Fields */
+#define CMP_FPR_FILT_PER_MASK 0xFFu
+#define CMP_FPR_FILT_PER_SHIFT 0
+#define CMP_FPR_FILT_PER(x) (((uint8_t)(((uint8_t)(x))<<CMP_FPR_FILT_PER_SHIFT))&CMP_FPR_FILT_PER_MASK)
+/* SCR Bit Fields */
+#define CMP_SCR_COUT_MASK 0x1u
+#define CMP_SCR_COUT_SHIFT 0
+#define CMP_SCR_CFF_MASK 0x2u
+#define CMP_SCR_CFF_SHIFT 1
+#define CMP_SCR_CFR_MASK 0x4u
+#define CMP_SCR_CFR_SHIFT 2
+#define CMP_SCR_IEF_MASK 0x8u
+#define CMP_SCR_IEF_SHIFT 3
+#define CMP_SCR_IER_MASK 0x10u
+#define CMP_SCR_IER_SHIFT 4
+#define CMP_SCR_DMAEN_MASK 0x40u
+#define CMP_SCR_DMAEN_SHIFT 6
+/* DACCR Bit Fields */
+#define CMP_DACCR_VOSEL_MASK 0x3Fu
+#define CMP_DACCR_VOSEL_SHIFT 0
+#define CMP_DACCR_VOSEL(x) (((uint8_t)(((uint8_t)(x))<<CMP_DACCR_VOSEL_SHIFT))&CMP_DACCR_VOSEL_MASK)
+#define CMP_DACCR_VRSEL_MASK 0x40u
+#define CMP_DACCR_VRSEL_SHIFT 6
+#define CMP_DACCR_DACEN_MASK 0x80u
+#define CMP_DACCR_DACEN_SHIFT 7
+/* MUXCR Bit Fields */
+#define CMP_MUXCR_MSEL_MASK 0x7u
+#define CMP_MUXCR_MSEL_SHIFT 0
+#define CMP_MUXCR_MSEL(x) (((uint8_t)(((uint8_t)(x))<<CMP_MUXCR_MSEL_SHIFT))&CMP_MUXCR_MSEL_MASK)
+#define CMP_MUXCR_PSEL_MASK 0x38u
+#define CMP_MUXCR_PSEL_SHIFT 3
+#define CMP_MUXCR_PSEL(x) (((uint8_t)(((uint8_t)(x))<<CMP_MUXCR_PSEL_SHIFT))&CMP_MUXCR_PSEL_MASK)
+
+/**
+ * @}
+ */ /* end of group CMP_Register_Masks */
+
+
+/* CMP - Peripheral instance base addresses */
+/** Peripheral CMP0 base address */
+#define CMP0_BASE (0x40073000u)
+/** Peripheral CMP0 base pointer */
+#define CMP0 ((CMP_Type *)CMP0_BASE)
+/** Peripheral CMP1 base address */
+#define CMP1_BASE (0x40073008u)
+/** Peripheral CMP1 base pointer */
+#define CMP1 ((CMP_Type *)CMP1_BASE)
+
+/**
+ * @}
+ */ /* end of group CMP_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- CMT Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup CMT_Peripheral_Access_Layer CMT Peripheral Access Layer
+ * @{
+ */
+
+/** CMT - Register Layout Typedef */
+typedef struct {
+ __IO uint8_t CGH1; /**< CMT Carrier Generator High Data Register 1, offset: 0x0 */
+ __IO uint8_t CGL1; /**< CMT Carrier Generator Low Data Register 1, offset: 0x1 */
+ __IO uint8_t CGH2; /**< CMT Carrier Generator High Data Register 2, offset: 0x2 */
+ __IO uint8_t CGL2; /**< CMT Carrier Generator Low Data Register 2, offset: 0x3 */
+ __IO uint8_t OC; /**< CMT Output Control Register, offset: 0x4 */
+ __IO uint8_t MSC; /**< CMT Modulator Status and Control Register, offset: 0x5 */
+ __IO uint8_t CMD1; /**< CMT Modulator Data Register Mark High, offset: 0x6 */
+ __IO uint8_t CMD2; /**< CMT Modulator Data Register Mark Low, offset: 0x7 */
+ __IO uint8_t CMD3; /**< CMT Modulator Data Register Space High, offset: 0x8 */
+ __IO uint8_t CMD4; /**< CMT Modulator Data Register Space Low, offset: 0x9 */
+ __IO uint8_t PPS; /**< CMT Primary Prescaler Register, offset: 0xA */
+ __IO uint8_t DMA; /**< CMT Direct Memory Access, offset: 0xB */
+} CMT_Type;
+
+/* ----------------------------------------------------------------------------
+ -- CMT Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup CMT_Register_Masks CMT Register Masks
+ * @{
+ */
+
+/* CGH1 Bit Fields */
+#define CMT_CGH1_PH_MASK 0xFFu
+#define CMT_CGH1_PH_SHIFT 0
+#define CMT_CGH1_PH(x) (((uint8_t)(((uint8_t)(x))<<CMT_CGH1_PH_SHIFT))&CMT_CGH1_PH_MASK)
+/* CGL1 Bit Fields */
+#define CMT_CGL1_PL_MASK 0xFFu
+#define CMT_CGL1_PL_SHIFT 0
+#define CMT_CGL1_PL(x) (((uint8_t)(((uint8_t)(x))<<CMT_CGL1_PL_SHIFT))&CMT_CGL1_PL_MASK)
+/* CGH2 Bit Fields */
+#define CMT_CGH2_SH_MASK 0xFFu
+#define CMT_CGH2_SH_SHIFT 0
+#define CMT_CGH2_SH(x) (((uint8_t)(((uint8_t)(x))<<CMT_CGH2_SH_SHIFT))&CMT_CGH2_SH_MASK)
+/* CGL2 Bit Fields */
+#define CMT_CGL2_SL_MASK 0xFFu
+#define CMT_CGL2_SL_SHIFT 0
+#define CMT_CGL2_SL(x) (((uint8_t)(((uint8_t)(x))<<CMT_CGL2_SL_SHIFT))&CMT_CGL2_SL_MASK)
+/* OC Bit Fields */
+#define CMT_OC_IROPEN_MASK 0x20u
+#define CMT_OC_IROPEN_SHIFT 5
+#define CMT_OC_CMTPOL_MASK 0x40u
+#define CMT_OC_CMTPOL_SHIFT 6
+#define CMT_OC_IROL_MASK 0x80u
+#define CMT_OC_IROL_SHIFT 7
+/* MSC Bit Fields */
+#define CMT_MSC_MCGEN_MASK 0x1u
+#define CMT_MSC_MCGEN_SHIFT 0
+#define CMT_MSC_EOCIE_MASK 0x2u
+#define CMT_MSC_EOCIE_SHIFT 1
+#define CMT_MSC_FSK_MASK 0x4u
+#define CMT_MSC_FSK_SHIFT 2
+#define CMT_MSC_BASE_MASK 0x8u
+#define CMT_MSC_BASE_SHIFT 3
+#define CMT_MSC_EXSPC_MASK 0x10u
+#define CMT_MSC_EXSPC_SHIFT 4
+#define CMT_MSC_CMTDIV_MASK 0x60u
+#define CMT_MSC_CMTDIV_SHIFT 5
+#define CMT_MSC_CMTDIV(x) (((uint8_t)(((uint8_t)(x))<<CMT_MSC_CMTDIV_SHIFT))&CMT_MSC_CMTDIV_MASK)
+#define CMT_MSC_EOCF_MASK 0x80u
+#define CMT_MSC_EOCF_SHIFT 7
+/* CMD1 Bit Fields */
+#define CMT_CMD1_MB_MASK 0xFFu
+#define CMT_CMD1_MB_SHIFT 0
+#define CMT_CMD1_MB(x) (((uint8_t)(((uint8_t)(x))<<CMT_CMD1_MB_SHIFT))&CMT_CMD1_MB_MASK)
+/* CMD2 Bit Fields */
+#define CMT_CMD2_MB_MASK 0xFFu
+#define CMT_CMD2_MB_SHIFT 0
+#define CMT_CMD2_MB(x) (((uint8_t)(((uint8_t)(x))<<CMT_CMD2_MB_SHIFT))&CMT_CMD2_MB_MASK)
+/* CMD3 Bit Fields */
+#define CMT_CMD3_SB_MASK 0xFFu
+#define CMT_CMD3_SB_SHIFT 0
+#define CMT_CMD3_SB(x) (((uint8_t)(((uint8_t)(x))<<CMT_CMD3_SB_SHIFT))&CMT_CMD3_SB_MASK)
+/* CMD4 Bit Fields */
+#define CMT_CMD4_SB_MASK 0xFFu
+#define CMT_CMD4_SB_SHIFT 0
+#define CMT_CMD4_SB(x) (((uint8_t)(((uint8_t)(x))<<CMT_CMD4_SB_SHIFT))&CMT_CMD4_SB_MASK)
+/* PPS Bit Fields */
+#define CMT_PPS_PPSDIV_MASK 0xFu
+#define CMT_PPS_PPSDIV_SHIFT 0
+#define CMT_PPS_PPSDIV(x) (((uint8_t)(((uint8_t)(x))<<CMT_PPS_PPSDIV_SHIFT))&CMT_PPS_PPSDIV_MASK)
+/* DMA Bit Fields */
+#define CMT_DMA_DMA_MASK 0x1u
+#define CMT_DMA_DMA_SHIFT 0
+
+/**
+ * @}
+ */ /* end of group CMT_Register_Masks */
+
+
+/* CMT - Peripheral instance base addresses */
+/** Peripheral CMT base address */
+#define CMT_BASE (0x40062000u)
+/** Peripheral CMT base pointer */
+#define CMT ((CMT_Type *)CMT_BASE)
+
+/**
+ * @}
+ */ /* end of group CMT_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- CRC Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup CRC_Peripheral_Access_Layer CRC Peripheral Access Layer
+ * @{
+ */
+
+/** CRC - Register Layout Typedef */
+typedef struct {
+ union { /* offset: 0x0 */
+ struct { /* offset: 0x0 */
+ __IO uint16_t CRCL; /**< CRC_CRCL register., offset: 0x0 */
+ __IO uint16_t CRCH; /**< CRC_CRCH register., offset: 0x2 */
+ } ACCESS16BIT;
+ __IO uint32_t CRC; /**< CRC Data Register, offset: 0x0 */
+ struct { /* offset: 0x0 */
+ __IO uint8_t CRCLL; /**< CRC_CRCLL register., offset: 0x0 */
+ __IO uint8_t CRCLU; /**< CRC_CRCLU register., offset: 0x1 */
+ __IO uint8_t CRCHL; /**< CRC_CRCHL register., offset: 0x2 */
+ __IO uint8_t CRCHU; /**< CRC_CRCHU register., offset: 0x3 */
+ } ACCESS8BIT;
+ };
+ union { /* offset: 0x4 */
+ struct { /* offset: 0x4 */
+ __IO uint16_t GPOLYL; /**< CRC_GPOLYL register., offset: 0x4 */
+ __IO uint16_t GPOLYH; /**< CRC_GPOLYH register., offset: 0x6 */
+ } GPOLY_ACCESS16BIT;
+ __IO uint32_t GPOLY; /**< CRC Polynomial Register, offset: 0x4 */
+ struct { /* offset: 0x4 */
+ __IO uint8_t GPOLYLL; /**< CRC_GPOLYLL register., offset: 0x4 */
+ __IO uint8_t GPOLYLU; /**< CRC_GPOLYLU register., offset: 0x5 */
+ __IO uint8_t GPOLYHL; /**< CRC_GPOLYHL register., offset: 0x6 */
+ __IO uint8_t GPOLYHU; /**< CRC_GPOLYHU register., offset: 0x7 */
+ } GPOLY_ACCESS8BIT;
+ };
+ union { /* offset: 0x8 */
+ __IO uint32_t CTRL; /**< CRC Control Register, offset: 0x8 */
+ struct { /* offset: 0x8 */
+ uint8_t RESERVED_0[3];
+ __IO uint8_t CTRLHU; /**< CRC_CTRLHU register., offset: 0xB */
+ } CTRL_ACCESS8BIT;
+ };
+} CRC_Type;
+
+/* ----------------------------------------------------------------------------
+ -- CRC Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup CRC_Register_Masks CRC Register Masks
+ * @{
+ */
+
+/* CRCL Bit Fields */
+#define CRC_CRCL_CRCL_MASK 0xFFFFu
+#define CRC_CRCL_CRCL_SHIFT 0
+#define CRC_CRCL_CRCL(x) (((uint16_t)(((uint16_t)(x))<<CRC_CRCL_CRCL_SHIFT))&CRC_CRCL_CRCL_MASK)
+/* CRCH Bit Fields */
+#define CRC_CRCH_CRCH_MASK 0xFFFFu
+#define CRC_CRCH_CRCH_SHIFT 0
+#define CRC_CRCH_CRCH(x) (((uint16_t)(((uint16_t)(x))<<CRC_CRCH_CRCH_SHIFT))&CRC_CRCH_CRCH_MASK)
+/* CRC Bit Fields */
+#define CRC_CRC_LL_MASK 0xFFu
+#define CRC_CRC_LL_SHIFT 0
+#define CRC_CRC_LL(x) (((uint32_t)(((uint32_t)(x))<<CRC_CRC_LL_SHIFT))&CRC_CRC_LL_MASK)
+#define CRC_CRC_LU_MASK 0xFF00u
+#define CRC_CRC_LU_SHIFT 8
+#define CRC_CRC_LU(x) (((uint32_t)(((uint32_t)(x))<<CRC_CRC_LU_SHIFT))&CRC_CRC_LU_MASK)
+#define CRC_CRC_HL_MASK 0xFF0000u
+#define CRC_CRC_HL_SHIFT 16
+#define CRC_CRC_HL(x) (((uint32_t)(((uint32_t)(x))<<CRC_CRC_HL_SHIFT))&CRC_CRC_HL_MASK)
+#define CRC_CRC_HU_MASK 0xFF000000u
+#define CRC_CRC_HU_SHIFT 24
+#define CRC_CRC_HU(x) (((uint32_t)(((uint32_t)(x))<<CRC_CRC_HU_SHIFT))&CRC_CRC_HU_MASK)
+/* CRCLL Bit Fields */
+#define CRC_CRCLL_CRCLL_MASK 0xFFu
+#define CRC_CRCLL_CRCLL_SHIFT 0
+#define CRC_CRCLL_CRCLL(x) (((uint8_t)(((uint8_t)(x))<<CRC_CRCLL_CRCLL_SHIFT))&CRC_CRCLL_CRCLL_MASK)
+/* CRCLU Bit Fields */
+#define CRC_CRCLU_CRCLU_MASK 0xFFu
+#define CRC_CRCLU_CRCLU_SHIFT 0
+#define CRC_CRCLU_CRCLU(x) (((uint8_t)(((uint8_t)(x))<<CRC_CRCLU_CRCLU_SHIFT))&CRC_CRCLU_CRCLU_MASK)
+/* CRCHL Bit Fields */
+#define CRC_CRCHL_CRCHL_MASK 0xFFu
+#define CRC_CRCHL_CRCHL_SHIFT 0
+#define CRC_CRCHL_CRCHL(x) (((uint8_t)(((uint8_t)(x))<<CRC_CRCHL_CRCHL_SHIFT))&CRC_CRCHL_CRCHL_MASK)
+/* CRCHU Bit Fields */
+#define CRC_CRCHU_CRCHU_MASK 0xFFu
+#define CRC_CRCHU_CRCHU_SHIFT 0
+#define CRC_CRCHU_CRCHU(x) (((uint8_t)(((uint8_t)(x))<<CRC_CRCHU_CRCHU_SHIFT))&CRC_CRCHU_CRCHU_MASK)
+/* GPOLYL Bit Fields */
+#define CRC_GPOLYL_GPOLYL_MASK 0xFFFFu
+#define CRC_GPOLYL_GPOLYL_SHIFT 0
+#define CRC_GPOLYL_GPOLYL(x) (((uint16_t)(((uint16_t)(x))<<CRC_GPOLYL_GPOLYL_SHIFT))&CRC_GPOLYL_GPOLYL_MASK)
+/* GPOLYH Bit Fields */
+#define CRC_GPOLYH_GPOLYH_MASK 0xFFFFu
+#define CRC_GPOLYH_GPOLYH_SHIFT 0
+#define CRC_GPOLYH_GPOLYH(x) (((uint16_t)(((uint16_t)(x))<<CRC_GPOLYH_GPOLYH_SHIFT))&CRC_GPOLYH_GPOLYH_MASK)
+/* GPOLY Bit Fields */
+#define CRC_GPOLY_LOW_MASK 0xFFFFu
+#define CRC_GPOLY_LOW_SHIFT 0
+#define CRC_GPOLY_LOW(x) (((uint32_t)(((uint32_t)(x))<<CRC_GPOLY_LOW_SHIFT))&CRC_GPOLY_LOW_MASK)
+#define CRC_GPOLY_HIGH_MASK 0xFFFF0000u
+#define CRC_GPOLY_HIGH_SHIFT 16
+#define CRC_GPOLY_HIGH(x) (((uint32_t)(((uint32_t)(x))<<CRC_GPOLY_HIGH_SHIFT))&CRC_GPOLY_HIGH_MASK)
+/* GPOLYLL Bit Fields */
+#define CRC_GPOLYLL_GPOLYLL_MASK 0xFFu
+#define CRC_GPOLYLL_GPOLYLL_SHIFT 0
+#define CRC_GPOLYLL_GPOLYLL(x) (((uint8_t)(((uint8_t)(x))<<CRC_GPOLYLL_GPOLYLL_SHIFT))&CRC_GPOLYLL_GPOLYLL_MASK)
+/* GPOLYLU Bit Fields */
+#define CRC_GPOLYLU_GPOLYLU_MASK 0xFFu
+#define CRC_GPOLYLU_GPOLYLU_SHIFT 0
+#define CRC_GPOLYLU_GPOLYLU(x) (((uint8_t)(((uint8_t)(x))<<CRC_GPOLYLU_GPOLYLU_SHIFT))&CRC_GPOLYLU_GPOLYLU_MASK)
+/* GPOLYHL Bit Fields */
+#define CRC_GPOLYHL_GPOLYHL_MASK 0xFFu
+#define CRC_GPOLYHL_GPOLYHL_SHIFT 0
+#define CRC_GPOLYHL_GPOLYHL(x) (((uint8_t)(((uint8_t)(x))<<CRC_GPOLYHL_GPOLYHL_SHIFT))&CRC_GPOLYHL_GPOLYHL_MASK)
+/* GPOLYHU Bit Fields */
+#define CRC_GPOLYHU_GPOLYHU_MASK 0xFFu
+#define CRC_GPOLYHU_GPOLYHU_SHIFT 0
+#define CRC_GPOLYHU_GPOLYHU(x) (((uint8_t)(((uint8_t)(x))<<CRC_GPOLYHU_GPOLYHU_SHIFT))&CRC_GPOLYHU_GPOLYHU_MASK)
+/* CTRL Bit Fields */
+#define CRC_CTRL_TCRC_MASK 0x1000000u
+#define CRC_CTRL_TCRC_SHIFT 24
+#define CRC_CTRL_WAS_MASK 0x2000000u
+#define CRC_CTRL_WAS_SHIFT 25
+#define CRC_CTRL_FXOR_MASK 0x4000000u
+#define CRC_CTRL_FXOR_SHIFT 26
+#define CRC_CTRL_TOTR_MASK 0x30000000u
+#define CRC_CTRL_TOTR_SHIFT 28
+#define CRC_CTRL_TOTR(x) (((uint32_t)(((uint32_t)(x))<<CRC_CTRL_TOTR_SHIFT))&CRC_CTRL_TOTR_MASK)
+#define CRC_CTRL_TOT_MASK 0xC0000000u
+#define CRC_CTRL_TOT_SHIFT 30
+#define CRC_CTRL_TOT(x) (((uint32_t)(((uint32_t)(x))<<CRC_CTRL_TOT_SHIFT))&CRC_CTRL_TOT_MASK)
+/* CTRLHU Bit Fields */
+#define CRC_CTRLHU_TCRC_MASK 0x1u
+#define CRC_CTRLHU_TCRC_SHIFT 0
+#define CRC_CTRLHU_WAS_MASK 0x2u
+#define CRC_CTRLHU_WAS_SHIFT 1
+#define CRC_CTRLHU_FXOR_MASK 0x4u
+#define CRC_CTRLHU_FXOR_SHIFT 2
+#define CRC_CTRLHU_TOTR_MASK 0x30u
+#define CRC_CTRLHU_TOTR_SHIFT 4
+#define CRC_CTRLHU_TOTR(x) (((uint8_t)(((uint8_t)(x))<<CRC_CTRLHU_TOTR_SHIFT))&CRC_CTRLHU_TOTR_MASK)
+#define CRC_CTRLHU_TOT_MASK 0xC0u
+#define CRC_CTRLHU_TOT_SHIFT 6
+#define CRC_CTRLHU_TOT(x) (((uint8_t)(((uint8_t)(x))<<CRC_CTRLHU_TOT_SHIFT))&CRC_CTRLHU_TOT_MASK)
+
+/**
+ * @}
+ */ /* end of group CRC_Register_Masks */
+
+
+/* CRC - Peripheral instance base addresses */
+/** Peripheral CRC base address */
+#define CRC_BASE (0x40032000u)
+/** Peripheral CRC base pointer */
+#define CRC0 ((CRC_Type *)CRC_BASE)
+
+/**
+ * @}
+ */ /* end of group CRC_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- DAC Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup DAC_Peripheral_Access_Layer DAC Peripheral Access Layer
+ * @{
+ */
+
+/** DAC - Register Layout Typedef */
+typedef struct {
+ struct { /* offset: 0x0, array step: 0x2 */
+ __IO uint8_t DATL; /**< DAC Data Low Register, array offset: 0x0, array step: 0x2 */
+ __IO uint8_t DATH; /**< DAC Data High Register, array offset: 0x1, array step: 0x2 */
+ } DAT[16];
+ __IO uint8_t SR; /**< DAC Status Register, offset: 0x20 */
+ __IO uint8_t C0; /**< DAC Control Register, offset: 0x21 */
+ __IO uint8_t C1; /**< DAC Control Register 1, offset: 0x22 */
+ __IO uint8_t C2; /**< DAC Control Register 2, offset: 0x23 */
+} DAC_Type, *DAC_MemMapPtr;
+
+/* ----------------------------------------------------------------------------
+ -- DAC Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup DAC_Register_Masks DAC Register Masks
+ * @{
+ */
+
+/* DATL Bit Fields */
+#define DAC_DATL_DATA0_MASK 0xFFu
+#define DAC_DATL_DATA0_SHIFT 0
+#define DAC_DATL_DATA0(x) (((uint8_t)(((uint8_t)(x))<<DAC_DATL_DATA0_SHIFT))&DAC_DATL_DATA0_MASK)
+/* DATH Bit Fields */
+#define DAC_DATH_DATA1_MASK 0xFu
+#define DAC_DATH_DATA1_SHIFT 0
+#define DAC_DATH_DATA1(x) (((uint8_t)(((uint8_t)(x))<<DAC_DATH_DATA1_SHIFT))&DAC_DATH_DATA1_MASK)
+/* SR Bit Fields */
+#define DAC_SR_DACBFRPBF_MASK 0x1u
+#define DAC_SR_DACBFRPBF_SHIFT 0
+#define DAC_SR_DACBFRPTF_MASK 0x2u
+#define DAC_SR_DACBFRPTF_SHIFT 1
+#define DAC_SR_DACBFWMF_MASK 0x4u
+#define DAC_SR_DACBFWMF_SHIFT 2
+/* C0 Bit Fields */
+#define DAC_C0_DACBBIEN_MASK 0x1u
+#define DAC_C0_DACBBIEN_SHIFT 0
+#define DAC_C0_DACBTIEN_MASK 0x2u
+#define DAC_C0_DACBTIEN_SHIFT 1
+#define DAC_C0_DACBWIEN_MASK 0x4u
+#define DAC_C0_DACBWIEN_SHIFT 2
+#define DAC_C0_LPEN_MASK 0x8u
+#define DAC_C0_LPEN_SHIFT 3
+#define DAC_C0_DACSWTRG_MASK 0x10u
+#define DAC_C0_DACSWTRG_SHIFT 4
+#define DAC_C0_DACTRGSEL_MASK 0x20u
+#define DAC_C0_DACTRGSEL_SHIFT 5
+#define DAC_C0_DACRFS_MASK 0x40u
+#define DAC_C0_DACRFS_SHIFT 6
+#define DAC_C0_DACEN_MASK 0x80u
+#define DAC_C0_DACEN_SHIFT 7
+/* C1 Bit Fields */
+#define DAC_C1_DACBFEN_MASK 0x1u
+#define DAC_C1_DACBFEN_SHIFT 0
+#define DAC_C1_DACBFMD_MASK 0x6u
+#define DAC_C1_DACBFMD_SHIFT 1
+#define DAC_C1_DACBFMD(x) (((uint8_t)(((uint8_t)(x))<<DAC_C1_DACBFMD_SHIFT))&DAC_C1_DACBFMD_MASK)
+#define DAC_C1_DACBFWM_MASK 0x18u
+#define DAC_C1_DACBFWM_SHIFT 3
+#define DAC_C1_DACBFWM(x) (((uint8_t)(((uint8_t)(x))<<DAC_C1_DACBFWM_SHIFT))&DAC_C1_DACBFWM_MASK)
+#define DAC_C1_DMAEN_MASK 0x80u
+#define DAC_C1_DMAEN_SHIFT 7
+/* C2 Bit Fields */
+#define DAC_C2_DACBFUP_MASK 0xFu
+#define DAC_C2_DACBFUP_SHIFT 0
+#define DAC_C2_DACBFUP(x) (((uint8_t)(((uint8_t)(x))<<DAC_C2_DACBFUP_SHIFT))&DAC_C2_DACBFUP_MASK)
+#define DAC_C2_DACBFRP_MASK 0xF0u
+#define DAC_C2_DACBFRP_SHIFT 4
+#define DAC_C2_DACBFRP(x) (((uint8_t)(((uint8_t)(x))<<DAC_C2_DACBFRP_SHIFT))&DAC_C2_DACBFRP_MASK)
+
+/**
+ * @}
+ */ /* end of group DAC_Register_Masks */
+
+
+/* DAC - Peripheral instance base addresses */
+/** Peripheral DAC0 base address */
+#define DAC0_BASE (0x400CC000u)
+/** Peripheral DAC0 base pointer */
+#define DAC0 ((DAC_Type *)DAC0_BASE)
+/** Array initializer of DAC peripheral base pointers */
+#define DAC_BASES { DAC0 }
+
+/**
+ * @}
+ */ /* end of group DAC_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- DMA Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup DMA_Peripheral_Access_Layer DMA Peripheral Access Layer
+ * @{
+ */
+
+/** DMA - Register Layout Typedef */
+typedef struct {
+ __IO uint32_t CR; /**< Control Register, offset: 0x0 */
+ __I uint32_t ES; /**< Error Status Register, offset: 0x4 */
+ uint8_t RESERVED_0[4];
+ __IO uint32_t ERQ; /**< Enable Request Register, offset: 0xC */
+ uint8_t RESERVED_1[4];
+ __IO uint32_t EEI; /**< Enable Error Interrupt Register, offset: 0x14 */
+ __O uint8_t CEEI; /**< Clear Enable Error Interrupt Register, offset: 0x18 */
+ __O uint8_t SEEI; /**< Set Enable Error Interrupt Register, offset: 0x19 */
+ __O uint8_t CERQ; /**< Clear Enable Request Register, offset: 0x1A */
+ __O uint8_t SERQ; /**< Set Enable Request Register, offset: 0x1B */
+ __O uint8_t CDNE; /**< Clear DONE Status Bit Register, offset: 0x1C */
+ __O uint8_t SSRT; /**< Set START Bit Register, offset: 0x1D */
+ __O uint8_t CERR; /**< Clear Error Register, offset: 0x1E */
+ __O uint8_t CINT; /**< Clear Interrupt Request Register, offset: 0x1F */
+ uint8_t RESERVED_2[4];
+ __IO uint32_t INT; /**< Interrupt Request Register, offset: 0x24 */
+ uint8_t RESERVED_3[4];
+ __IO uint32_t ERR; /**< Error Register, offset: 0x2C */
+ uint8_t RESERVED_4[4];
+ __IO uint32_t HRS; /**< Hardware Request Status Register, offset: 0x34 */
+ uint8_t RESERVED_5[200];
+ __IO uint8_t DCHPRI3; /**< Channel n Priority Register, offset: 0x100 */
+ __IO uint8_t DCHPRI2; /**< Channel n Priority Register, offset: 0x101 */
+ __IO uint8_t DCHPRI1; /**< Channel n Priority Register, offset: 0x102 */
+ __IO uint8_t DCHPRI0; /**< Channel n Priority Register, offset: 0x103 */
+ uint8_t RESERVED_6[3836];
+ struct { /* offset: 0x1000, array step: 0x20 */
+ __IO uint32_t SADDR; /**< TCD Source Address, array offset: 0x1000, array step: 0x20 */
+ __IO uint16_t SOFF; /**< TCD Signed Source Address Offset, array offset: 0x1004, array step: 0x20 */
+ __IO uint16_t ATTR; /**< TCD Transfer Attributes, array offset: 0x1006, array step: 0x20 */
+ union { /* offset: 0x1008, array step: 0x20 */
+ __IO uint32_t NBYTES_MLNO; /**< TCD Minor Byte Count (Minor Loop Disabled), array offset: 0x1008, array step: 0x20 */
+ __IO uint32_t NBYTES_MLOFFNO; /**< TCD Signed Minor Loop Offset (Minor Loop Enabled and Offset Disabled), array offset: 0x1008, array step: 0x20 */
+ __IO uint32_t NBYTES_MLOFFYES; /**< TCD Signed Minor Loop Offset (Minor Loop and Offset Enabled), array offset: 0x1008, array step: 0x20 */
+ };
+ __IO uint32_t SLAST; /**< TCD Last Source Address Adjustment, array offset: 0x100C, array step: 0x20 */
+ __IO uint32_t DADDR; /**< TCD Destination Address, array offset: 0x1010, array step: 0x20 */
+ __IO uint16_t DOFF; /**< TCD Signed Destination Address Offset, array offset: 0x1014, array step: 0x20 */
+ union { /* offset: 0x1016, array step: 0x20 */
+ __IO uint16_t CITER_ELINKNO; /**< TCD Current Minor Loop Link, Major Loop Count (Channel Linking Disabled), array offset: 0x1016, array step: 0x20 */
+ __IO uint16_t CITER_ELINKYES; /**< TCD Current Minor Loop Link, Major Loop Count (Channel Linking Enabled), array offset: 0x1016, array step: 0x20 */
+ };
+ __IO uint32_t DLAST_SGA; /**< TCD Last Destination Address Adjustment/Scatter Gather Address, array offset: 0x1018, array step: 0x20 */
+ __IO uint16_t CSR; /**< TCD Control and Status, array offset: 0x101C, array step: 0x20 */
+ union { /* offset: 0x101E, array step: 0x20 */
+ __IO uint16_t BITER_ELINKNO; /**< TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Disabled), array offset: 0x101E, array step: 0x20 */
+ __IO uint16_t BITER_ELINKYES; /**< TCD Beginning Minor Loop Link, Major Loop Count (Channel Linking Enabled), array offset: 0x101E, array step: 0x20 */
+ };
+ } TCD[4];
+} DMA_Type;
+
+/* ----------------------------------------------------------------------------
+ -- DMA Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup DMA_Register_Masks DMA Register Masks
+ * @{
+ */
+
+/* CR Bit Fields */
+#define DMA_CR_EDBG_MASK 0x2u
+#define DMA_CR_EDBG_SHIFT 1
+#define DMA_CR_ERCA_MASK 0x4u
+#define DMA_CR_ERCA_SHIFT 2
+#define DMA_CR_HOE_MASK 0x10u
+#define DMA_CR_HOE_SHIFT 4
+#define DMA_CR_HALT_MASK 0x20u
+#define DMA_CR_HALT_SHIFT 5
+#define DMA_CR_CLM_MASK 0x40u
+#define DMA_CR_CLM_SHIFT 6
+#define DMA_CR_EMLM_MASK 0x80u
+#define DMA_CR_EMLM_SHIFT 7
+#define DMA_CR_ECX_MASK 0x10000u
+#define DMA_CR_ECX_SHIFT 16
+#define DMA_CR_CX_MASK 0x20000u
+#define DMA_CR_CX_SHIFT 17
+/* ES Bit Fields */
+#define DMA_ES_DBE_MASK 0x1u
+#define DMA_ES_DBE_SHIFT 0
+#define DMA_ES_SBE_MASK 0x2u
+#define DMA_ES_SBE_SHIFT 1
+#define DMA_ES_SGE_MASK 0x4u
+#define DMA_ES_SGE_SHIFT 2
+#define DMA_ES_NCE_MASK 0x8u
+#define DMA_ES_NCE_SHIFT 3
+#define DMA_ES_DOE_MASK 0x10u
+#define DMA_ES_DOE_SHIFT 4
+#define DMA_ES_DAE_MASK 0x20u
+#define DMA_ES_DAE_SHIFT 5
+#define DMA_ES_SOE_MASK 0x40u
+#define DMA_ES_SOE_SHIFT 6
+#define DMA_ES_SAE_MASK 0x80u
+#define DMA_ES_SAE_SHIFT 7
+#define DMA_ES_ERRCHN_MASK 0xF00u
+#define DMA_ES_ERRCHN_SHIFT 8
+#define DMA_ES_ERRCHN(x) (((uint32_t)(((uint32_t)(x))<<DMA_ES_ERRCHN_SHIFT))&DMA_ES_ERRCHN_MASK)
+#define DMA_ES_CPE_MASK 0x4000u
+#define DMA_ES_CPE_SHIFT 14
+#define DMA_ES_ECX_MASK 0x10000u
+#define DMA_ES_ECX_SHIFT 16
+#define DMA_ES_VLD_MASK 0x80000000u
+#define DMA_ES_VLD_SHIFT 31
+/* ERQ Bit Fields */
+#define DMA_ERQ_ERQ0_MASK 0x1u
+#define DMA_ERQ_ERQ0_SHIFT 0
+#define DMA_ERQ_ERQ1_MASK 0x2u
+#define DMA_ERQ_ERQ1_SHIFT 1
+#define DMA_ERQ_ERQ2_MASK 0x4u
+#define DMA_ERQ_ERQ2_SHIFT 2
+#define DMA_ERQ_ERQ3_MASK 0x8u
+#define DMA_ERQ_ERQ3_SHIFT 3
+/* EEI Bit Fields */
+#define DMA_EEI_EEI0_MASK 0x1u
+#define DMA_EEI_EEI0_SHIFT 0
+#define DMA_EEI_EEI1_MASK 0x2u
+#define DMA_EEI_EEI1_SHIFT 1
+#define DMA_EEI_EEI2_MASK 0x4u
+#define DMA_EEI_EEI2_SHIFT 2
+#define DMA_EEI_EEI3_MASK 0x8u
+#define DMA_EEI_EEI3_SHIFT 3
+/* CEEI Bit Fields */
+#define DMA_CEEI_CEEI_MASK 0xFu
+#define DMA_CEEI_CEEI_SHIFT 0
+#define DMA_CEEI_CEEI(x) (((uint8_t)(((uint8_t)(x))<<DMA_CEEI_CEEI_SHIFT))&DMA_CEEI_CEEI_MASK)
+#define DMA_CEEI_CAEE_MASK 0x40u
+#define DMA_CEEI_CAEE_SHIFT 6
+#define DMA_CEEI_NOP_MASK 0x80u
+#define DMA_CEEI_NOP_SHIFT 7
+/* SEEI Bit Fields */
+#define DMA_SEEI_SEEI_MASK 0xFu
+#define DMA_SEEI_SEEI_SHIFT 0
+#define DMA_SEEI_SEEI(x) (((uint8_t)(((uint8_t)(x))<<DMA_SEEI_SEEI_SHIFT))&DMA_SEEI_SEEI_MASK)
+#define DMA_SEEI_SAEE_MASK 0x40u
+#define DMA_SEEI_SAEE_SHIFT 6
+#define DMA_SEEI_NOP_MASK 0x80u
+#define DMA_SEEI_NOP_SHIFT 7
+/* CERQ Bit Fields */
+#define DMA_CERQ_CERQ_MASK 0xFu
+#define DMA_CERQ_CERQ_SHIFT 0
+#define DMA_CERQ_CERQ(x) (((uint8_t)(((uint8_t)(x))<<DMA_CERQ_CERQ_SHIFT))&DMA_CERQ_CERQ_MASK)
+#define DMA_CERQ_CAER_MASK 0x40u
+#define DMA_CERQ_CAER_SHIFT 6
+#define DMA_CERQ_NOP_MASK 0x80u
+#define DMA_CERQ_NOP_SHIFT 7
+/* SERQ Bit Fields */
+#define DMA_SERQ_SERQ_MASK 0xFu
+#define DMA_SERQ_SERQ_SHIFT 0
+#define DMA_SERQ_SERQ(x) (((uint8_t)(((uint8_t)(x))<<DMA_SERQ_SERQ_SHIFT))&DMA_SERQ_SERQ_MASK)
+#define DMA_SERQ_SAER_MASK 0x40u
+#define DMA_SERQ_SAER_SHIFT 6
+#define DMA_SERQ_NOP_MASK 0x80u
+#define DMA_SERQ_NOP_SHIFT 7
+/* CDNE Bit Fields */
+#define DMA_CDNE_CDNE_MASK 0xFu
+#define DMA_CDNE_CDNE_SHIFT 0
+#define DMA_CDNE_CDNE(x) (((uint8_t)(((uint8_t)(x))<<DMA_CDNE_CDNE_SHIFT))&DMA_CDNE_CDNE_MASK)
+#define DMA_CDNE_CADN_MASK 0x40u
+#define DMA_CDNE_CADN_SHIFT 6
+#define DMA_CDNE_NOP_MASK 0x80u
+#define DMA_CDNE_NOP_SHIFT 7
+/* SSRT Bit Fields */
+#define DMA_SSRT_SSRT_MASK 0xFu
+#define DMA_SSRT_SSRT_SHIFT 0
+#define DMA_SSRT_SSRT(x) (((uint8_t)(((uint8_t)(x))<<DMA_SSRT_SSRT_SHIFT))&DMA_SSRT_SSRT_MASK)
+#define DMA_SSRT_SAST_MASK 0x40u
+#define DMA_SSRT_SAST_SHIFT 6
+#define DMA_SSRT_NOP_MASK 0x80u
+#define DMA_SSRT_NOP_SHIFT 7
+/* CERR Bit Fields */
+#define DMA_CERR_CERR_MASK 0xFu
+#define DMA_CERR_CERR_SHIFT 0
+#define DMA_CERR_CERR(x) (((uint8_t)(((uint8_t)(x))<<DMA_CERR_CERR_SHIFT))&DMA_CERR_CERR_MASK)
+#define DMA_CERR_CAEI_MASK 0x40u
+#define DMA_CERR_CAEI_SHIFT 6
+#define DMA_CERR_NOP_MASK 0x80u
+#define DMA_CERR_NOP_SHIFT 7
+/* CINT Bit Fields */
+#define DMA_CINT_CINT_MASK 0xFu
+#define DMA_CINT_CINT_SHIFT 0
+#define DMA_CINT_CINT(x) (((uint8_t)(((uint8_t)(x))<<DMA_CINT_CINT_SHIFT))&DMA_CINT_CINT_MASK)
+#define DMA_CINT_CAIR_MASK 0x40u
+#define DMA_CINT_CAIR_SHIFT 6
+#define DMA_CINT_NOP_MASK 0x80u
+#define DMA_CINT_NOP_SHIFT 7
+/* INT Bit Fields */
+#define DMA_INT_INT0_MASK 0x1u
+#define DMA_INT_INT0_SHIFT 0
+#define DMA_INT_INT1_MASK 0x2u
+#define DMA_INT_INT1_SHIFT 1
+#define DMA_INT_INT2_MASK 0x4u
+#define DMA_INT_INT2_SHIFT 2
+#define DMA_INT_INT3_MASK 0x8u
+#define DMA_INT_INT3_SHIFT 3
+/* ERR Bit Fields */
+#define DMA_ERR_ERR0_MASK 0x1u
+#define DMA_ERR_ERR0_SHIFT 0
+#define DMA_ERR_ERR1_MASK 0x2u
+#define DMA_ERR_ERR1_SHIFT 1
+#define DMA_ERR_ERR2_MASK 0x4u
+#define DMA_ERR_ERR2_SHIFT 2
+#define DMA_ERR_ERR3_MASK 0x8u
+#define DMA_ERR_ERR3_SHIFT 3
+/* HRS Bit Fields */
+#define DMA_HRS_HRS0_MASK 0x1u
+#define DMA_HRS_HRS0_SHIFT 0
+#define DMA_HRS_HRS1_MASK 0x2u
+#define DMA_HRS_HRS1_SHIFT 1
+#define DMA_HRS_HRS2_MASK 0x4u
+#define DMA_HRS_HRS2_SHIFT 2
+#define DMA_HRS_HRS3_MASK 0x8u
+#define DMA_HRS_HRS3_SHIFT 3
+/* DCHPRI3 Bit Fields */
+#define DMA_DCHPRI3_CHPRI_MASK 0xFu
+#define DMA_DCHPRI3_CHPRI_SHIFT 0
+#define DMA_DCHPRI3_CHPRI(x) (((uint8_t)(((uint8_t)(x))<<DMA_DCHPRI3_CHPRI_SHIFT))&DMA_DCHPRI3_CHPRI_MASK)
+#define DMA_DCHPRI3_DPA_MASK 0x40u
+#define DMA_DCHPRI3_DPA_SHIFT 6
+#define DMA_DCHPRI3_ECP_MASK 0x80u
+#define DMA_DCHPRI3_ECP_SHIFT 7
+/* DCHPRI2 Bit Fields */
+#define DMA_DCHPRI2_CHPRI_MASK 0xFu
+#define DMA_DCHPRI2_CHPRI_SHIFT 0
+#define DMA_DCHPRI2_CHPRI(x) (((uint8_t)(((uint8_t)(x))<<DMA_DCHPRI2_CHPRI_SHIFT))&DMA_DCHPRI2_CHPRI_MASK)
+#define DMA_DCHPRI2_DPA_MASK 0x40u
+#define DMA_DCHPRI2_DPA_SHIFT 6
+#define DMA_DCHPRI2_ECP_MASK 0x80u
+#define DMA_DCHPRI2_ECP_SHIFT 7
+/* DCHPRI1 Bit Fields */
+#define DMA_DCHPRI1_CHPRI_MASK 0xFu
+#define DMA_DCHPRI1_CHPRI_SHIFT 0
+#define DMA_DCHPRI1_CHPRI(x) (((uint8_t)(((uint8_t)(x))<<DMA_DCHPRI1_CHPRI_SHIFT))&DMA_DCHPRI1_CHPRI_MASK)
+#define DMA_DCHPRI1_DPA_MASK 0x40u
+#define DMA_DCHPRI1_DPA_SHIFT 6
+#define DMA_DCHPRI1_ECP_MASK 0x80u
+#define DMA_DCHPRI1_ECP_SHIFT 7
+/* DCHPRI0 Bit Fields */
+#define DMA_DCHPRI0_CHPRI_MASK 0xFu
+#define DMA_DCHPRI0_CHPRI_SHIFT 0
+#define DMA_DCHPRI0_CHPRI(x) (((uint8_t)(((uint8_t)(x))<<DMA_DCHPRI0_CHPRI_SHIFT))&DMA_DCHPRI0_CHPRI_MASK)
+#define DMA_DCHPRI0_DPA_MASK 0x40u
+#define DMA_DCHPRI0_DPA_SHIFT 6
+#define DMA_DCHPRI0_ECP_MASK 0x80u
+#define DMA_DCHPRI0_ECP_SHIFT 7
+/* SADDR Bit Fields */
+#define DMA_SADDR_SADDR_MASK 0xFFFFFFFFu
+#define DMA_SADDR_SADDR_SHIFT 0
+#define DMA_SADDR_SADDR(x) (((uint32_t)(((uint32_t)(x))<<DMA_SADDR_SADDR_SHIFT))&DMA_SADDR_SADDR_MASK)
+/* SOFF Bit Fields */
+#define DMA_SOFF_SOFF_MASK 0xFFFFu
+#define DMA_SOFF_SOFF_SHIFT 0
+#define DMA_SOFF_SOFF(x) (((uint16_t)(((uint16_t)(x))<<DMA_SOFF_SOFF_SHIFT))&DMA_SOFF_SOFF_MASK)
+/* ATTR Bit Fields */
+#define DMA_ATTR_DSIZE_MASK 0x7u
+#define DMA_ATTR_DSIZE_SHIFT 0
+#define DMA_ATTR_DSIZE(x) (((uint16_t)(((uint16_t)(x))<<DMA_ATTR_DSIZE_SHIFT))&DMA_ATTR_DSIZE_MASK)
+#define DMA_ATTR_DMOD_MASK 0xF8u
+#define DMA_ATTR_DMOD_SHIFT 3
+#define DMA_ATTR_DMOD(x) (((uint16_t)(((uint16_t)(x))<<DMA_ATTR_DMOD_SHIFT))&DMA_ATTR_DMOD_MASK)
+#define DMA_ATTR_SSIZE_MASK 0x700u
+#define DMA_ATTR_SSIZE_SHIFT 8
+#define DMA_ATTR_SSIZE(x) (((uint16_t)(((uint16_t)(x))<<DMA_ATTR_SSIZE_SHIFT))&DMA_ATTR_SSIZE_MASK)
+#define DMA_ATTR_SMOD_MASK 0xF800u
+#define DMA_ATTR_SMOD_SHIFT 11
+#define DMA_ATTR_SMOD(x) (((uint16_t)(((uint16_t)(x))<<DMA_ATTR_SMOD_SHIFT))&DMA_ATTR_SMOD_MASK)
+/* NBYTES_MLNO Bit Fields */
+#define DMA_NBYTES_MLNO_NBYTES_MASK 0xFFFFFFFFu
+#define DMA_NBYTES_MLNO_NBYTES_SHIFT 0
+#define DMA_NBYTES_MLNO_NBYTES(x) (((uint32_t)(((uint32_t)(x))<<DMA_NBYTES_MLNO_NBYTES_SHIFT))&DMA_NBYTES_MLNO_NBYTES_MASK)
+/* NBYTES_MLOFFNO Bit Fields */
+#define DMA_NBYTES_MLOFFNO_NBYTES_MASK 0x3FFFFFFFu
+#define DMA_NBYTES_MLOFFNO_NBYTES_SHIFT 0
+#define DMA_NBYTES_MLOFFNO_NBYTES(x) (((uint32_t)(((uint32_t)(x))<<DMA_NBYTES_MLOFFNO_NBYTES_SHIFT))&DMA_NBYTES_MLOFFNO_NBYTES_MASK)
+#define DMA_NBYTES_MLOFFNO_DMLOE_MASK 0x40000000u
+#define DMA_NBYTES_MLOFFNO_DMLOE_SHIFT 30
+#define DMA_NBYTES_MLOFFNO_SMLOE_MASK 0x80000000u
+#define DMA_NBYTES_MLOFFNO_SMLOE_SHIFT 31
+/* NBYTES_MLOFFYES Bit Fields */
+#define DMA_NBYTES_MLOFFYES_NBYTES_MASK 0x3FFu
+#define DMA_NBYTES_MLOFFYES_NBYTES_SHIFT 0
+#define DMA_NBYTES_MLOFFYES_NBYTES(x) (((uint32_t)(((uint32_t)(x))<<DMA_NBYTES_MLOFFYES_NBYTES_SHIFT))&DMA_NBYTES_MLOFFYES_NBYTES_MASK)
+#define DMA_NBYTES_MLOFFYES_MLOFF_MASK 0x3FFFFC00u
+#define DMA_NBYTES_MLOFFYES_MLOFF_SHIFT 10
+#define DMA_NBYTES_MLOFFYES_MLOFF(x) (((uint32_t)(((uint32_t)(x))<<DMA_NBYTES_MLOFFYES_MLOFF_SHIFT))&DMA_NBYTES_MLOFFYES_MLOFF_MASK)
+#define DMA_NBYTES_MLOFFYES_DMLOE_MASK 0x40000000u
+#define DMA_NBYTES_MLOFFYES_DMLOE_SHIFT 30
+#define DMA_NBYTES_MLOFFYES_SMLOE_MASK 0x80000000u
+#define DMA_NBYTES_MLOFFYES_SMLOE_SHIFT 31
+/* SLAST Bit Fields */
+#define DMA_SLAST_SLAST_MASK 0xFFFFFFFFu
+#define DMA_SLAST_SLAST_SHIFT 0
+#define DMA_SLAST_SLAST(x) (((uint32_t)(((uint32_t)(x))<<DMA_SLAST_SLAST_SHIFT))&DMA_SLAST_SLAST_MASK)
+/* DADDR Bit Fields */
+#define DMA_DADDR_DADDR_MASK 0xFFFFFFFFu
+#define DMA_DADDR_DADDR_SHIFT 0
+#define DMA_DADDR_DADDR(x) (((uint32_t)(((uint32_t)(x))<<DMA_DADDR_DADDR_SHIFT))&DMA_DADDR_DADDR_MASK)
+/* DOFF Bit Fields */
+#define DMA_DOFF_DOFF_MASK 0xFFFFu
+#define DMA_DOFF_DOFF_SHIFT 0
+#define DMA_DOFF_DOFF(x) (((uint16_t)(((uint16_t)(x))<<DMA_DOFF_DOFF_SHIFT))&DMA_DOFF_DOFF_MASK)
+/* CITER_ELINKNO Bit Fields */
+#define DMA_CITER_ELINKNO_CITER_MASK 0x7FFFu
+#define DMA_CITER_ELINKNO_CITER_SHIFT 0
+#define DMA_CITER_ELINKNO_CITER(x) (((uint16_t)(((uint16_t)(x))<<DMA_CITER_ELINKNO_CITER_SHIFT))&DMA_CITER_ELINKNO_CITER_MASK)
+#define DMA_CITER_ELINKNO_ELINK_MASK 0x8000u
+#define DMA_CITER_ELINKNO_ELINK_SHIFT 15
+/* CITER_ELINKYES Bit Fields */
+#define DMA_CITER_ELINKYES_CITER_MASK 0x1FFu
+#define DMA_CITER_ELINKYES_CITER_SHIFT 0
+#define DMA_CITER_ELINKYES_CITER(x) (((uint16_t)(((uint16_t)(x))<<DMA_CITER_ELINKYES_CITER_SHIFT))&DMA_CITER_ELINKYES_CITER_MASK)
+#define DMA_CITER_ELINKYES_LINKCH_MASK 0x1E00u
+#define DMA_CITER_ELINKYES_LINKCH_SHIFT 9
+#define DMA_CITER_ELINKYES_LINKCH(x) (((uint16_t)(((uint16_t)(x))<<DMA_CITER_ELINKYES_LINKCH_SHIFT))&DMA_CITER_ELINKYES_LINKCH_MASK)
+#define DMA_CITER_ELINKYES_ELINK_MASK 0x8000u
+#define DMA_CITER_ELINKYES_ELINK_SHIFT 15
+/* DLAST_SGA Bit Fields */
+#define DMA_DLAST_SGA_DLASTSGA_MASK 0xFFFFFFFFu
+#define DMA_DLAST_SGA_DLASTSGA_SHIFT 0
+#define DMA_DLAST_SGA_DLASTSGA(x) (((uint32_t)(((uint32_t)(x))<<DMA_DLAST_SGA_DLASTSGA_SHIFT))&DMA_DLAST_SGA_DLASTSGA_MASK)
+/* CSR Bit Fields */
+#define DMA_CSR_START_MASK 0x1u
+#define DMA_CSR_START_SHIFT 0
+#define DMA_CSR_INTMAJOR_MASK 0x2u
+#define DMA_CSR_INTMAJOR_SHIFT 1
+#define DMA_CSR_INTHALF_MASK 0x4u
+#define DMA_CSR_INTHALF_SHIFT 2
+#define DMA_CSR_DREQ_MASK 0x8u
+#define DMA_CSR_DREQ_SHIFT 3
+#define DMA_CSR_ESG_MASK 0x10u
+#define DMA_CSR_ESG_SHIFT 4
+#define DMA_CSR_MAJORELINK_MASK 0x20u
+#define DMA_CSR_MAJORELINK_SHIFT 5
+#define DMA_CSR_ACTIVE_MASK 0x40u
+#define DMA_CSR_ACTIVE_SHIFT 6
+#define DMA_CSR_DONE_MASK 0x80u
+#define DMA_CSR_DONE_SHIFT 7
+#define DMA_CSR_MAJORLINKCH_MASK 0xF00u
+#define DMA_CSR_MAJORLINKCH_SHIFT 8
+#define DMA_CSR_MAJORLINKCH(x) (((uint16_t)(((uint16_t)(x))<<DMA_CSR_MAJORLINKCH_SHIFT))&DMA_CSR_MAJORLINKCH_MASK)
+#define DMA_CSR_BWC_MASK 0xC000u
+#define DMA_CSR_BWC_SHIFT 14
+#define DMA_CSR_BWC(x) (((uint16_t)(((uint16_t)(x))<<DMA_CSR_BWC_SHIFT))&DMA_CSR_BWC_MASK)
+/* BITER_ELINKNO Bit Fields */
+#define DMA_BITER_ELINKNO_BITER_MASK 0x7FFFu
+#define DMA_BITER_ELINKNO_BITER_SHIFT 0
+#define DMA_BITER_ELINKNO_BITER(x) (((uint16_t)(((uint16_t)(x))<<DMA_BITER_ELINKNO_BITER_SHIFT))&DMA_BITER_ELINKNO_BITER_MASK)
+#define DMA_BITER_ELINKNO_ELINK_MASK 0x8000u
+#define DMA_BITER_ELINKNO_ELINK_SHIFT 15
+/* BITER_ELINKYES Bit Fields */
+#define DMA_BITER_ELINKYES_BITER_MASK 0x1FFu
+#define DMA_BITER_ELINKYES_BITER_SHIFT 0
+#define DMA_BITER_ELINKYES_BITER(x) (((uint16_t)(((uint16_t)(x))<<DMA_BITER_ELINKYES_BITER_SHIFT))&DMA_BITER_ELINKYES_BITER_MASK)
+#define DMA_BITER_ELINKYES_LINKCH_MASK 0x1E00u
+#define DMA_BITER_ELINKYES_LINKCH_SHIFT 9
+#define DMA_BITER_ELINKYES_LINKCH(x) (((uint16_t)(((uint16_t)(x))<<DMA_BITER_ELINKYES_LINKCH_SHIFT))&DMA_BITER_ELINKYES_LINKCH_MASK)
+#define DMA_BITER_ELINKYES_ELINK_MASK 0x8000u
+#define DMA_BITER_ELINKYES_ELINK_SHIFT 15
+
+/**
+ * @}
+ */ /* end of group DMA_Register_Masks */
+
+
+/* DMA - Peripheral instance base addresses */
+/** Peripheral DMA base address */
+#define DMA_BASE (0x40008000u)
+/** Peripheral DMA base pointer */
+#define DMA0 ((DMA_Type *)DMA_BASE)
+
+/**
+ * @}
+ */ /* end of group DMA_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- DMAMUX Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup DMAMUX_Peripheral_Access_Layer DMAMUX Peripheral Access Layer
+ * @{
+ */
+
+/** DMAMUX - Register Layout Typedef */
+typedef struct {
+ __IO uint8_t CHCFG[16]; /**< Channel Configuration Register, array offset: 0x0, array step: 0x1 */
+} DMAMUX_Type;
+
+/* ----------------------------------------------------------------------------
+ -- DMAMUX Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup DMAMUX_Register_Masks DMAMUX Register Masks
+ * @{
+ */
+
+/* CHCFG Bit Fields */
+#define DMAMUX_CHCFG_SOURCE_MASK 0x3Fu
+#define DMAMUX_CHCFG_SOURCE_SHIFT 0
+#define DMAMUX_CHCFG_SOURCE(x) (((uint8_t)(((uint8_t)(x))<<DMAMUX_CHCFG_SOURCE_SHIFT))&DMAMUX_CHCFG_SOURCE_MASK)
+#define DMAMUX_CHCFG_TRIG_MASK 0x40u
+#define DMAMUX_CHCFG_TRIG_SHIFT 6
+#define DMAMUX_CHCFG_ENBL_MASK 0x80u
+#define DMAMUX_CHCFG_ENBL_SHIFT 7
+
+/**
+ * @}
+ */ /* end of group DMAMUX_Register_Masks */
+
+
+/* DMAMUX - Peripheral instance base addresses */
+/** Peripheral DMAMUX base address */
+#define DMAMUX_BASE (0x40021000u)
+/** Peripheral DMAMUX base pointer */
+#define DMAMUX ((DMAMUX_Type *)DMAMUX_BASE)
+
+/**
+ * @}
+ */ /* end of group DMAMUX_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- EWM Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup EWM_Peripheral_Access_Layer EWM Peripheral Access Layer
+ * @{
+ */
+
+/** EWM - Register Layout Typedef */
+typedef struct {
+ __IO uint8_t CTRL; /**< Control Register, offset: 0x0 */
+ __O uint8_t SERV; /**< Service Register, offset: 0x1 */
+ __IO uint8_t CMPL; /**< Compare Low Register, offset: 0x2 */
+ __IO uint8_t CMPH; /**< Compare High Register, offset: 0x3 */
+} EWM_Type;
+
+/* ----------------------------------------------------------------------------
+ -- EWM Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup EWM_Register_Masks EWM Register Masks
+ * @{
+ */
+
+/* CTRL Bit Fields */
+#define EWM_CTRL_EWMEN_MASK 0x1u
+#define EWM_CTRL_EWMEN_SHIFT 0
+#define EWM_CTRL_ASSIN_MASK 0x2u
+#define EWM_CTRL_ASSIN_SHIFT 1
+#define EWM_CTRL_INEN_MASK 0x4u
+#define EWM_CTRL_INEN_SHIFT 2
+#define EWM_CTRL_INTEN_MASK 0x8u
+#define EWM_CTRL_INTEN_SHIFT 3
+/* SERV Bit Fields */
+#define EWM_SERV_SERVICE_MASK 0xFFu
+#define EWM_SERV_SERVICE_SHIFT 0
+#define EWM_SERV_SERVICE(x) (((uint8_t)(((uint8_t)(x))<<EWM_SERV_SERVICE_SHIFT))&EWM_SERV_SERVICE_MASK)
+/* CMPL Bit Fields */
+#define EWM_CMPL_COMPAREL_MASK 0xFFu
+#define EWM_CMPL_COMPAREL_SHIFT 0
+#define EWM_CMPL_COMPAREL(x) (((uint8_t)(((uint8_t)(x))<<EWM_CMPL_COMPAREL_SHIFT))&EWM_CMPL_COMPAREL_MASK)
+/* CMPH Bit Fields */
+#define EWM_CMPH_COMPAREH_MASK 0xFFu
+#define EWM_CMPH_COMPAREH_SHIFT 0
+#define EWM_CMPH_COMPAREH(x) (((uint8_t)(((uint8_t)(x))<<EWM_CMPH_COMPAREH_SHIFT))&EWM_CMPH_COMPAREH_MASK)
+
+/**
+ * @}
+ */ /* end of group EWM_Register_Masks */
+
+
+/* EWM - Peripheral instance base addresses */
+/** Peripheral EWM base address */
+#define EWM_BASE (0x40061000u)
+/** Peripheral EWM base pointer */
+#define EWM ((EWM_Type *)EWM_BASE)
+
+/**
+ * @}
+ */ /* end of group EWM_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- FMC Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup FMC_Peripheral_Access_Layer FMC Peripheral Access Layer
+ * @{
+ */
+
+/** FMC - Register Layout Typedef */
+typedef struct {
+ __IO uint32_t PFAPR; /**< Flash Access Protection Register, offset: 0x0 */
+ __IO uint32_t PFB0CR; /**< Flash Control Register, offset: 0x4 */
+ uint8_t RESERVED_0[248];
+ struct { /* offset: 0x100, array step: 0x20 */
+ __IO uint32_t TAGVD[2]; /**< Cache Tag Storage, array offset: 0x100, array step: index*0x20, index2*0x4 */
+ uint8_t RESERVED_0[24];
+ } TAG_WAY[4];
+ uint8_t RESERVED_1[132];
+ struct { /* offset: 0x204, array step: 0x8 */
+ __IO uint32_t DATAW0S; /**< Cache Data Storage, array offset: 0x204, array step: 0x8 */
+ uint8_t RESERVED_0[4];
+ } DATAW0S[2];
+ uint8_t RESERVED_2[48];
+ struct { /* offset: 0x244, array step: 0x8 */
+ __IO uint32_t DATAW1S; /**< Cache Data Storage, array offset: 0x244, array step: 0x8 */
+ uint8_t RESERVED_0[4];
+ } DATAW1S[2];
+ uint8_t RESERVED_3[48];
+ struct { /* offset: 0x284, array step: 0x8 */
+ __IO uint32_t DATAW2S; /**< Cache Data Storage, array offset: 0x284, array step: 0x8 */
+ uint8_t RESERVED_0[4];
+ } DATAW2S[2];
+ uint8_t RESERVED_4[48];
+ struct { /* offset: 0x2C4, array step: 0x8 */
+ __IO uint32_t DATAW3S; /**< Cache Data Storage, array offset: 0x2C4, array step: 0x8 */
+ uint8_t RESERVED_0[4];
+ } DATAW3S[2];
+} FMC_Type;
+
+/* ----------------------------------------------------------------------------
+ -- FMC Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup FMC_Register_Masks FMC Register Masks
+ * @{
+ */
+
+/* PFAPR Bit Fields */
+#define FMC_PFAPR_M0AP_MASK 0x3u
+#define FMC_PFAPR_M0AP_SHIFT 0
+#define FMC_PFAPR_M0AP(x) (((uint32_t)(((uint32_t)(x))<<FMC_PFAPR_M0AP_SHIFT))&FMC_PFAPR_M0AP_MASK)
+#define FMC_PFAPR_M1AP_MASK 0xCu
+#define FMC_PFAPR_M1AP_SHIFT 2
+#define FMC_PFAPR_M1AP(x) (((uint32_t)(((uint32_t)(x))<<FMC_PFAPR_M1AP_SHIFT))&FMC_PFAPR_M1AP_MASK)
+#define FMC_PFAPR_M2AP_MASK 0x30u
+#define FMC_PFAPR_M2AP_SHIFT 4
+#define FMC_PFAPR_M2AP(x) (((uint32_t)(((uint32_t)(x))<<FMC_PFAPR_M2AP_SHIFT))&FMC_PFAPR_M2AP_MASK)
+#define FMC_PFAPR_M3AP_MASK 0xC0u
+#define FMC_PFAPR_M3AP_SHIFT 6
+#define FMC_PFAPR_M3AP(x) (((uint32_t)(((uint32_t)(x))<<FMC_PFAPR_M3AP_SHIFT))&FMC_PFAPR_M3AP_MASK)
+#define FMC_PFAPR_M0PFD_MASK 0x10000u
+#define FMC_PFAPR_M0PFD_SHIFT 16
+#define FMC_PFAPR_M1PFD_MASK 0x20000u
+#define FMC_PFAPR_M1PFD_SHIFT 17
+#define FMC_PFAPR_M2PFD_MASK 0x40000u
+#define FMC_PFAPR_M2PFD_SHIFT 18
+#define FMC_PFAPR_M3PFD_MASK 0x80000u
+#define FMC_PFAPR_M3PFD_SHIFT 19
+/* PFB0CR Bit Fields */
+#define FMC_PFB0CR_B0SEBE_MASK 0x1u
+#define FMC_PFB0CR_B0SEBE_SHIFT 0
+#define FMC_PFB0CR_B0IPE_MASK 0x2u
+#define FMC_PFB0CR_B0IPE_SHIFT 1
+#define FMC_PFB0CR_B0DPE_MASK 0x4u
+#define FMC_PFB0CR_B0DPE_SHIFT 2
+#define FMC_PFB0CR_B0ICE_MASK 0x8u
+#define FMC_PFB0CR_B0ICE_SHIFT 3
+#define FMC_PFB0CR_B0DCE_MASK 0x10u
+#define FMC_PFB0CR_B0DCE_SHIFT 4
+#define FMC_PFB0CR_CRC_MASK 0xE0u
+#define FMC_PFB0CR_CRC_SHIFT 5
+#define FMC_PFB0CR_CRC(x) (((uint32_t)(((uint32_t)(x))<<FMC_PFB0CR_CRC_SHIFT))&FMC_PFB0CR_CRC_MASK)
+#define FMC_PFB0CR_B0MW_MASK 0x60000u
+#define FMC_PFB0CR_B0MW_SHIFT 17
+#define FMC_PFB0CR_B0MW(x) (((uint32_t)(((uint32_t)(x))<<FMC_PFB0CR_B0MW_SHIFT))&FMC_PFB0CR_B0MW_MASK)
+#define FMC_PFB0CR_S_B_INV_MASK 0x80000u
+#define FMC_PFB0CR_S_B_INV_SHIFT 19
+#define FMC_PFB0CR_CINV_WAY_MASK 0xF00000u
+#define FMC_PFB0CR_CINV_WAY_SHIFT 20
+#define FMC_PFB0CR_CINV_WAY(x) (((uint32_t)(((uint32_t)(x))<<FMC_PFB0CR_CINV_WAY_SHIFT))&FMC_PFB0CR_CINV_WAY_MASK)
+#define FMC_PFB0CR_CLCK_WAY_MASK 0xF000000u
+#define FMC_PFB0CR_CLCK_WAY_SHIFT 24
+#define FMC_PFB0CR_CLCK_WAY(x) (((uint32_t)(((uint32_t)(x))<<FMC_PFB0CR_CLCK_WAY_SHIFT))&FMC_PFB0CR_CLCK_WAY_MASK)
+#define FMC_PFB0CR_B0RWSC_MASK 0xF0000000u
+#define FMC_PFB0CR_B0RWSC_SHIFT 28
+#define FMC_PFB0CR_B0RWSC(x) (((uint32_t)(((uint32_t)(x))<<FMC_PFB0CR_B0RWSC_SHIFT))&FMC_PFB0CR_B0RWSC_MASK)
+/* TAGVD Bit Fields */
+#define FMC_TAGVD_valid_MASK 0x1u
+#define FMC_TAGVD_valid_SHIFT 0
+#define FMC_TAGVD_tag_MASK 0x7FFC0u
+#define FMC_TAGVD_tag_SHIFT 6
+#define FMC_TAGVD_tag(x) (((uint32_t)(((uint32_t)(x))<<FMC_TAGVD_tag_SHIFT))&FMC_TAGVD_tag_MASK)
+/* DATAW0S Bit Fields */
+#define FMC_DATAW0S_data_MASK 0xFFFFFFFFu
+#define FMC_DATAW0S_data_SHIFT 0
+#define FMC_DATAW0S_data(x) (((uint32_t)(((uint32_t)(x))<<FMC_DATAW0S_data_SHIFT))&FMC_DATAW0S_data_MASK)
+/* DATAW1S Bit Fields */
+#define FMC_DATAW1S_data_MASK 0xFFFFFFFFu
+#define FMC_DATAW1S_data_SHIFT 0
+#define FMC_DATAW1S_data(x) (((uint32_t)(((uint32_t)(x))<<FMC_DATAW1S_data_SHIFT))&FMC_DATAW1S_data_MASK)
+/* DATAW2S Bit Fields */
+#define FMC_DATAW2S_data_MASK 0xFFFFFFFFu
+#define FMC_DATAW2S_data_SHIFT 0
+#define FMC_DATAW2S_data(x) (((uint32_t)(((uint32_t)(x))<<FMC_DATAW2S_data_SHIFT))&FMC_DATAW2S_data_MASK)
+/* DATAW3S Bit Fields */
+#define FMC_DATAW3S_data_MASK 0xFFFFFFFFu
+#define FMC_DATAW3S_data_SHIFT 0
+#define FMC_DATAW3S_data(x) (((uint32_t)(((uint32_t)(x))<<FMC_DATAW3S_data_SHIFT))&FMC_DATAW3S_data_MASK)
+
+/**
+ * @}
+ */ /* end of group FMC_Register_Masks */
+
+
+/* FMC - Peripheral instance base addresses */
+/** Peripheral FMC base address */
+#define FMC_BASE (0x4001F000u)
+/** Peripheral FMC base pointer */
+#define FMC ((FMC_Type *)FMC_BASE)
+
+/**
+ * @}
+ */ /* end of group FMC_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- FTFL Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup FTFL_Peripheral_Access_Layer FTFL Peripheral Access Layer
+ * @{
+ */
+
+/** FTFL - Register Layout Typedef */
+typedef struct {
+ __IO uint8_t FSTAT; /**< Flash Status Register, offset: 0x0 */
+ __IO uint8_t FCNFG; /**< Flash Configuration Register, offset: 0x1 */
+ __I uint8_t FSEC; /**< Flash Security Register, offset: 0x2 */
+ __I uint8_t FOPT; /**< Flash Option Register, offset: 0x3 */
+ __IO uint8_t FCCOB3; /**< Flash Common Command Object Registers, offset: 0x4 */
+ __IO uint8_t FCCOB2; /**< Flash Common Command Object Registers, offset: 0x5 */
+ __IO uint8_t FCCOB1; /**< Flash Common Command Object Registers, offset: 0x6 */
+ __IO uint8_t FCCOB0; /**< Flash Common Command Object Registers, offset: 0x7 */
+ __IO uint8_t FCCOB7; /**< Flash Common Command Object Registers, offset: 0x8 */
+ __IO uint8_t FCCOB6; /**< Flash Common Command Object Registers, offset: 0x9 */
+ __IO uint8_t FCCOB5; /**< Flash Common Command Object Registers, offset: 0xA */
+ __IO uint8_t FCCOB4; /**< Flash Common Command Object Registers, offset: 0xB */
+ __IO uint8_t FCCOBB; /**< Flash Common Command Object Registers, offset: 0xC */
+ __IO uint8_t FCCOBA; /**< Flash Common Command Object Registers, offset: 0xD */
+ __IO uint8_t FCCOB9; /**< Flash Common Command Object Registers, offset: 0xE */
+ __IO uint8_t FCCOB8; /**< Flash Common Command Object Registers, offset: 0xF */
+ __IO uint8_t FPROT3; /**< Program Flash Protection Registers, offset: 0x10 */
+ __IO uint8_t FPROT2; /**< Program Flash Protection Registers, offset: 0x11 */
+ __IO uint8_t FPROT1; /**< Program Flash Protection Registers, offset: 0x12 */
+ __IO uint8_t FPROT0; /**< Program Flash Protection Registers, offset: 0x13 */
+ uint8_t RESERVED_0[2];
+ __IO uint8_t FEPROT; /**< EEPROM Protection Register, offset: 0x16 */
+ __IO uint8_t FDPROT; /**< Data Flash Protection Register, offset: 0x17 */
+} FTFL_Type;
+
+/* ----------------------------------------------------------------------------
+ -- FTFL Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup FTFL_Register_Masks FTFL Register Masks
+ * @{
+ */
+
+/* FSTAT Bit Fields */
+#define FTFL_FSTAT_MGSTAT0_MASK 0x1u
+#define FTFL_FSTAT_MGSTAT0_SHIFT 0
+#define FTFL_FSTAT_FPVIOL_MASK 0x10u
+#define FTFL_FSTAT_FPVIOL_SHIFT 4
+#define FTFL_FSTAT_ACCERR_MASK 0x20u
+#define FTFL_FSTAT_ACCERR_SHIFT 5
+#define FTFL_FSTAT_RDCOLERR_MASK 0x40u
+#define FTFL_FSTAT_RDCOLERR_SHIFT 6
+#define FTFL_FSTAT_CCIF_MASK 0x80u
+#define FTFL_FSTAT_CCIF_SHIFT 7
+/* FCNFG Bit Fields */
+#define FTFL_FCNFG_EEERDY_MASK 0x1u
+#define FTFL_FCNFG_EEERDY_SHIFT 0
+#define FTFL_FCNFG_RAMRDY_MASK 0x2u
+#define FTFL_FCNFG_RAMRDY_SHIFT 1
+#define FTFL_FCNFG_PFLSH_MASK 0x4u
+#define FTFL_FCNFG_PFLSH_SHIFT 2
+#define FTFL_FCNFG_ERSSUSP_MASK 0x10u
+#define FTFL_FCNFG_ERSSUSP_SHIFT 4
+#define FTFL_FCNFG_ERSAREQ_MASK 0x20u
+#define FTFL_FCNFG_ERSAREQ_SHIFT 5
+#define FTFL_FCNFG_RDCOLLIE_MASK 0x40u
+#define FTFL_FCNFG_RDCOLLIE_SHIFT 6
+#define FTFL_FCNFG_CCIE_MASK 0x80u
+#define FTFL_FCNFG_CCIE_SHIFT 7
+/* FSEC Bit Fields */
+#define FTFL_FSEC_SEC_MASK 0x3u
+#define FTFL_FSEC_SEC_SHIFT 0
+#define FTFL_FSEC_SEC(x) (((uint8_t)(((uint8_t)(x))<<FTFL_FSEC_SEC_SHIFT))&FTFL_FSEC_SEC_MASK)
+#define FTFL_FSEC_FSLACC_MASK 0xCu
+#define FTFL_FSEC_FSLACC_SHIFT 2
+#define FTFL_FSEC_FSLACC(x) (((uint8_t)(((uint8_t)(x))<<FTFL_FSEC_FSLACC_SHIFT))&FTFL_FSEC_FSLACC_MASK)
+#define FTFL_FSEC_MEEN_MASK 0x30u
+#define FTFL_FSEC_MEEN_SHIFT 4
+#define FTFL_FSEC_MEEN(x) (((uint8_t)(((uint8_t)(x))<<FTFL_FSEC_MEEN_SHIFT))&FTFL_FSEC_MEEN_MASK)
+#define FTFL_FSEC_KEYEN_MASK 0xC0u
+#define FTFL_FSEC_KEYEN_SHIFT 6
+#define FTFL_FSEC_KEYEN(x) (((uint8_t)(((uint8_t)(x))<<FTFL_FSEC_KEYEN_SHIFT))&FTFL_FSEC_KEYEN_MASK)
+/* FOPT Bit Fields */
+#define FTFL_FOPT_OPT_MASK 0xFFu
+#define FTFL_FOPT_OPT_SHIFT 0
+#define FTFL_FOPT_OPT(x) (((uint8_t)(((uint8_t)(x))<<FTFL_FOPT_OPT_SHIFT))&FTFL_FOPT_OPT_MASK)
+/* FCCOB3 Bit Fields */
+#define FTFL_FCCOB3_CCOBn_MASK 0xFFu
+#define FTFL_FCCOB3_CCOBn_SHIFT 0
+#define FTFL_FCCOB3_CCOBn(x) (((uint8_t)(((uint8_t)(x))<<FTFL_FCCOB3_CCOBn_SHIFT))&FTFL_FCCOB3_CCOBn_MASK)
+/* FCCOB2 Bit Fields */
+#define FTFL_FCCOB2_CCOBn_MASK 0xFFu
+#define FTFL_FCCOB2_CCOBn_SHIFT 0
+#define FTFL_FCCOB2_CCOBn(x) (((uint8_t)(((uint8_t)(x))<<FTFL_FCCOB2_CCOBn_SHIFT))&FTFL_FCCOB2_CCOBn_MASK)
+/* FCCOB1 Bit Fields */
+#define FTFL_FCCOB1_CCOBn_MASK 0xFFu
+#define FTFL_FCCOB1_CCOBn_SHIFT 0
+#define FTFL_FCCOB1_CCOBn(x) (((uint8_t)(((uint8_t)(x))<<FTFL_FCCOB1_CCOBn_SHIFT))&FTFL_FCCOB1_CCOBn_MASK)
+/* FCCOB0 Bit Fields */
+#define FTFL_FCCOB0_CCOBn_MASK 0xFFu
+#define FTFL_FCCOB0_CCOBn_SHIFT 0
+#define FTFL_FCCOB0_CCOBn(x) (((uint8_t)(((uint8_t)(x))<<FTFL_FCCOB0_CCOBn_SHIFT))&FTFL_FCCOB0_CCOBn_MASK)
+/* FCCOB7 Bit Fields */
+#define FTFL_FCCOB7_CCOBn_MASK 0xFFu
+#define FTFL_FCCOB7_CCOBn_SHIFT 0
+#define FTFL_FCCOB7_CCOBn(x) (((uint8_t)(((uint8_t)(x))<<FTFL_FCCOB7_CCOBn_SHIFT))&FTFL_FCCOB7_CCOBn_MASK)
+/* FCCOB6 Bit Fields */
+#define FTFL_FCCOB6_CCOBn_MASK 0xFFu
+#define FTFL_FCCOB6_CCOBn_SHIFT 0
+#define FTFL_FCCOB6_CCOBn(x) (((uint8_t)(((uint8_t)(x))<<FTFL_FCCOB6_CCOBn_SHIFT))&FTFL_FCCOB6_CCOBn_MASK)
+/* FCCOB5 Bit Fields */
+#define FTFL_FCCOB5_CCOBn_MASK 0xFFu
+#define FTFL_FCCOB5_CCOBn_SHIFT 0
+#define FTFL_FCCOB5_CCOBn(x) (((uint8_t)(((uint8_t)(x))<<FTFL_FCCOB5_CCOBn_SHIFT))&FTFL_FCCOB5_CCOBn_MASK)
+/* FCCOB4 Bit Fields */
+#define FTFL_FCCOB4_CCOBn_MASK 0xFFu
+#define FTFL_FCCOB4_CCOBn_SHIFT 0
+#define FTFL_FCCOB4_CCOBn(x) (((uint8_t)(((uint8_t)(x))<<FTFL_FCCOB4_CCOBn_SHIFT))&FTFL_FCCOB4_CCOBn_MASK)
+/* FCCOBB Bit Fields */
+#define FTFL_FCCOBB_CCOBn_MASK 0xFFu
+#define FTFL_FCCOBB_CCOBn_SHIFT 0
+#define FTFL_FCCOBB_CCOBn(x) (((uint8_t)(((uint8_t)(x))<<FTFL_FCCOBB_CCOBn_SHIFT))&FTFL_FCCOBB_CCOBn_MASK)
+/* FCCOBA Bit Fields */
+#define FTFL_FCCOBA_CCOBn_MASK 0xFFu
+#define FTFL_FCCOBA_CCOBn_SHIFT 0
+#define FTFL_FCCOBA_CCOBn(x) (((uint8_t)(((uint8_t)(x))<<FTFL_FCCOBA_CCOBn_SHIFT))&FTFL_FCCOBA_CCOBn_MASK)
+/* FCCOB9 Bit Fields */
+#define FTFL_FCCOB9_CCOBn_MASK 0xFFu
+#define FTFL_FCCOB9_CCOBn_SHIFT 0
+#define FTFL_FCCOB9_CCOBn(x) (((uint8_t)(((uint8_t)(x))<<FTFL_FCCOB9_CCOBn_SHIFT))&FTFL_FCCOB9_CCOBn_MASK)
+/* FCCOB8 Bit Fields */
+#define FTFL_FCCOB8_CCOBn_MASK 0xFFu
+#define FTFL_FCCOB8_CCOBn_SHIFT 0
+#define FTFL_FCCOB8_CCOBn(x) (((uint8_t)(((uint8_t)(x))<<FTFL_FCCOB8_CCOBn_SHIFT))&FTFL_FCCOB8_CCOBn_MASK)
+/* FPROT3 Bit Fields */
+#define FTFL_FPROT3_PROT_MASK 0xFFu
+#define FTFL_FPROT3_PROT_SHIFT 0
+#define FTFL_FPROT3_PROT(x) (((uint8_t)(((uint8_t)(x))<<FTFL_FPROT3_PROT_SHIFT))&FTFL_FPROT3_PROT_MASK)
+/* FPROT2 Bit Fields */
+#define FTFL_FPROT2_PROT_MASK 0xFFu
+#define FTFL_FPROT2_PROT_SHIFT 0
+#define FTFL_FPROT2_PROT(x) (((uint8_t)(((uint8_t)(x))<<FTFL_FPROT2_PROT_SHIFT))&FTFL_FPROT2_PROT_MASK)
+/* FPROT1 Bit Fields */
+#define FTFL_FPROT1_PROT_MASK 0xFFu
+#define FTFL_FPROT1_PROT_SHIFT 0
+#define FTFL_FPROT1_PROT(x) (((uint8_t)(((uint8_t)(x))<<FTFL_FPROT1_PROT_SHIFT))&FTFL_FPROT1_PROT_MASK)
+/* FPROT0 Bit Fields */
+#define FTFL_FPROT0_PROT_MASK 0xFFu
+#define FTFL_FPROT0_PROT_SHIFT 0
+#define FTFL_FPROT0_PROT(x) (((uint8_t)(((uint8_t)(x))<<FTFL_FPROT0_PROT_SHIFT))&FTFL_FPROT0_PROT_MASK)
+/* FEPROT Bit Fields */
+#define FTFL_FEPROT_EPROT_MASK 0xFFu
+#define FTFL_FEPROT_EPROT_SHIFT 0
+#define FTFL_FEPROT_EPROT(x) (((uint8_t)(((uint8_t)(x))<<FTFL_FEPROT_EPROT_SHIFT))&FTFL_FEPROT_EPROT_MASK)
+/* FDPROT Bit Fields */
+#define FTFL_FDPROT_DPROT_MASK 0xFFu
+#define FTFL_FDPROT_DPROT_SHIFT 0
+#define FTFL_FDPROT_DPROT(x) (((uint8_t)(((uint8_t)(x))<<FTFL_FDPROT_DPROT_SHIFT))&FTFL_FDPROT_DPROT_MASK)
+
+/**
+ * @}
+ */ /* end of group FTFL_Register_Masks */
+
+
+/* FTFL - Peripheral instance base addresses */
+/** Peripheral FTFL base address */
+#define FTFL_BASE (0x40020000u)
+/** Peripheral FTFL base pointer */
+#define FTFL ((FTFL_Type *)FTFL_BASE)
+
+/**
+ * @}
+ */ /* end of group FTFL_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- FTM Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup FTM_Peripheral_Access_Layer FTM Peripheral Access Layer
+ * @{
+ */
+
+/** FTM - Register Layout Typedef */
+typedef struct {
+ __IO uint32_t SC; /**< Status and Control, offset: 0x0 */
+ __IO uint32_t CNT; /**< Counter, offset: 0x4 */
+ __IO uint32_t MOD; /**< Modulo, offset: 0x8 */
+ struct { /* offset: 0xC, array step: 0x8 */
+ __IO uint32_t CnSC; /**< Channel (n) Status and Control, array offset: 0xC, array step: 0x8 */
+ __IO uint32_t CnV; /**< Channel (n) Value, array offset: 0x10, array step: 0x8 */
+ } CONTROLS[8];
+ __IO uint32_t CNTIN; /**< Counter Initial Value, offset: 0x4C */
+ __I uint32_t STATUS; /**< Capture and Compare Status, offset: 0x50 */
+ __IO uint32_t MODE; /**< Features Mode Selection, offset: 0x54 */
+ __IO uint32_t SYNC; /**< Synchronization, offset: 0x58 */
+ __IO uint32_t OUTINIT; /**< Initial State for Channels Output, offset: 0x5C */
+ __IO uint32_t OUTMASK; /**< Output Mask, offset: 0x60 */
+ __IO uint32_t COMBINE; /**< Function for Linked Channels, offset: 0x64 */
+ __IO uint32_t DEADTIME; /**< Deadtime Insertion Control, offset: 0x68 */
+ __IO uint32_t EXTTRIG; /**< FTM External Trigger, offset: 0x6C */
+ __IO uint32_t POL; /**< Channels Polarity, offset: 0x70 */
+ __IO uint32_t FMS; /**< Fault Mode Status, offset: 0x74 */
+ __IO uint32_t FILTER; /**< Input Capture Filter Control, offset: 0x78 */
+ __IO uint32_t FLTCTRL; /**< Fault Control, offset: 0x7C */
+ __IO uint32_t QDCTRL; /**< Quadrature Decoder Control and Status, offset: 0x80 */
+ __IO uint32_t CONF; /**< Configuration, offset: 0x84 */
+ __IO uint32_t FLTPOL; /**< FTM Fault Input Polarity, offset: 0x88 */
+ __IO uint32_t SYNCONF; /**< Synchronization Configuration, offset: 0x8C */
+ __IO uint32_t INVCTRL; /**< FTM Inverting Control, offset: 0x90 */
+ __IO uint32_t SWOCTRL; /**< FTM Software Output Control, offset: 0x94 */
+ __IO uint32_t PWMLOAD; /**< FTM PWM Load, offset: 0x98 */
+} FTM_Type;
+
+/* ----------------------------------------------------------------------------
+ -- FTM Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup FTM_Register_Masks FTM Register Masks
+ * @{
+ */
+
+/* SC Bit Fields */
+#define FTM_SC_PS_MASK 0x7u
+#define FTM_SC_PS_SHIFT 0
+#define FTM_SC_PS(x) (((uint32_t)(((uint32_t)(x))<<FTM_SC_PS_SHIFT))&FTM_SC_PS_MASK)
+#define FTM_SC_CLKS_MASK 0x18u
+#define FTM_SC_CLKS_SHIFT 3
+#define FTM_SC_CLKS(x) (((uint32_t)(((uint32_t)(x))<<FTM_SC_CLKS_SHIFT))&FTM_SC_CLKS_MASK)
+#define FTM_SC_CPWMS_MASK 0x20u
+#define FTM_SC_CPWMS_SHIFT 5
+#define FTM_SC_TOIE_MASK 0x40u
+#define FTM_SC_TOIE_SHIFT 6
+#define FTM_SC_TOF_MASK 0x80u
+#define FTM_SC_TOF_SHIFT 7
+/* CNT Bit Fields */
+#define FTM_CNT_COUNT_MASK 0xFFFFu
+#define FTM_CNT_COUNT_SHIFT 0
+#define FTM_CNT_COUNT(x) (((uint32_t)(((uint32_t)(x))<<FTM_CNT_COUNT_SHIFT))&FTM_CNT_COUNT_MASK)
+/* MOD Bit Fields */
+#define FTM_MOD_MOD_MASK 0xFFFFu
+#define FTM_MOD_MOD_SHIFT 0
+#define FTM_MOD_MOD(x) (((uint32_t)(((uint32_t)(x))<<FTM_MOD_MOD_SHIFT))&FTM_MOD_MOD_MASK)
+/* CnSC Bit Fields */
+#define FTM_CnSC_DMA_MASK 0x1u
+#define FTM_CnSC_DMA_SHIFT 0
+#define FTM_CnSC_ELSA_MASK 0x4u
+#define FTM_CnSC_ELSA_SHIFT 2
+#define FTM_CnSC_ELSB_MASK 0x8u
+#define FTM_CnSC_ELSB_SHIFT 3
+#define FTM_CnSC_MSA_MASK 0x10u
+#define FTM_CnSC_MSA_SHIFT 4
+#define FTM_CnSC_MSB_MASK 0x20u
+#define FTM_CnSC_MSB_SHIFT 5
+#define FTM_CnSC_CHIE_MASK 0x40u
+#define FTM_CnSC_CHIE_SHIFT 6
+#define FTM_CnSC_CHF_MASK 0x80u
+#define FTM_CnSC_CHF_SHIFT 7
+/* CnV Bit Fields */
+#define FTM_CnV_VAL_MASK 0xFFFFu
+#define FTM_CnV_VAL_SHIFT 0
+#define FTM_CnV_VAL(x) (((uint32_t)(((uint32_t)(x))<<FTM_CnV_VAL_SHIFT))&FTM_CnV_VAL_MASK)
+/* CNTIN Bit Fields */
+#define FTM_CNTIN_INIT_MASK 0xFFFFu
+#define FTM_CNTIN_INIT_SHIFT 0
+#define FTM_CNTIN_INIT(x) (((uint32_t)(((uint32_t)(x))<<FTM_CNTIN_INIT_SHIFT))&FTM_CNTIN_INIT_MASK)
+/* STATUS Bit Fields */
+#define FTM_STATUS_CH0F_MASK 0x1u
+#define FTM_STATUS_CH0F_SHIFT 0
+#define FTM_STATUS_CH1F_MASK 0x2u
+#define FTM_STATUS_CH1F_SHIFT 1
+#define FTM_STATUS_CH2F_MASK 0x4u
+#define FTM_STATUS_CH2F_SHIFT 2
+#define FTM_STATUS_CH3F_MASK 0x8u
+#define FTM_STATUS_CH3F_SHIFT 3
+#define FTM_STATUS_CH4F_MASK 0x10u
+#define FTM_STATUS_CH4F_SHIFT 4
+#define FTM_STATUS_CH5F_MASK 0x20u
+#define FTM_STATUS_CH5F_SHIFT 5
+#define FTM_STATUS_CH6F_MASK 0x40u
+#define FTM_STATUS_CH6F_SHIFT 6
+#define FTM_STATUS_CH7F_MASK 0x80u
+#define FTM_STATUS_CH7F_SHIFT 7
+/* MODE Bit Fields */
+#define FTM_MODE_FTMEN_MASK 0x1u
+#define FTM_MODE_FTMEN_SHIFT 0
+#define FTM_MODE_INIT_MASK 0x2u
+#define FTM_MODE_INIT_SHIFT 1
+#define FTM_MODE_WPDIS_MASK 0x4u
+#define FTM_MODE_WPDIS_SHIFT 2
+#define FTM_MODE_PWMSYNC_MASK 0x8u
+#define FTM_MODE_PWMSYNC_SHIFT 3
+#define FTM_MODE_CAPTEST_MASK 0x10u
+#define FTM_MODE_CAPTEST_SHIFT 4
+#define FTM_MODE_FAULTM_MASK 0x60u
+#define FTM_MODE_FAULTM_SHIFT 5
+#define FTM_MODE_FAULTM(x) (((uint32_t)(((uint32_t)(x))<<FTM_MODE_FAULTM_SHIFT))&FTM_MODE_FAULTM_MASK)
+#define FTM_MODE_FAULTIE_MASK 0x80u
+#define FTM_MODE_FAULTIE_SHIFT 7
+/* SYNC Bit Fields */
+#define FTM_SYNC_CNTMIN_MASK 0x1u
+#define FTM_SYNC_CNTMIN_SHIFT 0
+#define FTM_SYNC_CNTMAX_MASK 0x2u
+#define FTM_SYNC_CNTMAX_SHIFT 1
+#define FTM_SYNC_REINIT_MASK 0x4u
+#define FTM_SYNC_REINIT_SHIFT 2
+#define FTM_SYNC_SYNCHOM_MASK 0x8u
+#define FTM_SYNC_SYNCHOM_SHIFT 3
+#define FTM_SYNC_TRIG0_MASK 0x10u
+#define FTM_SYNC_TRIG0_SHIFT 4
+#define FTM_SYNC_TRIG1_MASK 0x20u
+#define FTM_SYNC_TRIG1_SHIFT 5
+#define FTM_SYNC_TRIG2_MASK 0x40u
+#define FTM_SYNC_TRIG2_SHIFT 6
+#define FTM_SYNC_SWSYNC_MASK 0x80u
+#define FTM_SYNC_SWSYNC_SHIFT 7
+/* OUTINIT Bit Fields */
+#define FTM_OUTINIT_CH0OI_MASK 0x1u
+#define FTM_OUTINIT_CH0OI_SHIFT 0
+#define FTM_OUTINIT_CH1OI_MASK 0x2u
+#define FTM_OUTINIT_CH1OI_SHIFT 1
+#define FTM_OUTINIT_CH2OI_MASK 0x4u
+#define FTM_OUTINIT_CH2OI_SHIFT 2
+#define FTM_OUTINIT_CH3OI_MASK 0x8u
+#define FTM_OUTINIT_CH3OI_SHIFT 3
+#define FTM_OUTINIT_CH4OI_MASK 0x10u
+#define FTM_OUTINIT_CH4OI_SHIFT 4
+#define FTM_OUTINIT_CH5OI_MASK 0x20u
+#define FTM_OUTINIT_CH5OI_SHIFT 5
+#define FTM_OUTINIT_CH6OI_MASK 0x40u
+#define FTM_OUTINIT_CH6OI_SHIFT 6
+#define FTM_OUTINIT_CH7OI_MASK 0x80u
+#define FTM_OUTINIT_CH7OI_SHIFT 7
+/* OUTMASK Bit Fields */
+#define FTM_OUTMASK_CH0OM_MASK 0x1u
+#define FTM_OUTMASK_CH0OM_SHIFT 0
+#define FTM_OUTMASK_CH1OM_MASK 0x2u
+#define FTM_OUTMASK_CH1OM_SHIFT 1
+#define FTM_OUTMASK_CH2OM_MASK 0x4u
+#define FTM_OUTMASK_CH2OM_SHIFT 2
+#define FTM_OUTMASK_CH3OM_MASK 0x8u
+#define FTM_OUTMASK_CH3OM_SHIFT 3
+#define FTM_OUTMASK_CH4OM_MASK 0x10u
+#define FTM_OUTMASK_CH4OM_SHIFT 4
+#define FTM_OUTMASK_CH5OM_MASK 0x20u
+#define FTM_OUTMASK_CH5OM_SHIFT 5
+#define FTM_OUTMASK_CH6OM_MASK 0x40u
+#define FTM_OUTMASK_CH6OM_SHIFT 6
+#define FTM_OUTMASK_CH7OM_MASK 0x80u
+#define FTM_OUTMASK_CH7OM_SHIFT 7
+/* COMBINE Bit Fields */
+#define FTM_COMBINE_COMBINE0_MASK 0x1u
+#define FTM_COMBINE_COMBINE0_SHIFT 0
+#define FTM_COMBINE_COMP0_MASK 0x2u
+#define FTM_COMBINE_COMP0_SHIFT 1
+#define FTM_COMBINE_DECAPEN0_MASK 0x4u
+#define FTM_COMBINE_DECAPEN0_SHIFT 2
+#define FTM_COMBINE_DECAP0_MASK 0x8u
+#define FTM_COMBINE_DECAP0_SHIFT 3
+#define FTM_COMBINE_DTEN0_MASK 0x10u
+#define FTM_COMBINE_DTEN0_SHIFT 4
+#define FTM_COMBINE_SYNCEN0_MASK 0x20u
+#define FTM_COMBINE_SYNCEN0_SHIFT 5
+#define FTM_COMBINE_FAULTEN0_MASK 0x40u
+#define FTM_COMBINE_FAULTEN0_SHIFT 6
+#define FTM_COMBINE_COMBINE1_MASK 0x100u
+#define FTM_COMBINE_COMBINE1_SHIFT 8
+#define FTM_COMBINE_COMP1_MASK 0x200u
+#define FTM_COMBINE_COMP1_SHIFT 9
+#define FTM_COMBINE_DECAPEN1_MASK 0x400u
+#define FTM_COMBINE_DECAPEN1_SHIFT 10
+#define FTM_COMBINE_DECAP1_MASK 0x800u
+#define FTM_COMBINE_DECAP1_SHIFT 11
+#define FTM_COMBINE_DTEN1_MASK 0x1000u
+#define FTM_COMBINE_DTEN1_SHIFT 12
+#define FTM_COMBINE_SYNCEN1_MASK 0x2000u
+#define FTM_COMBINE_SYNCEN1_SHIFT 13
+#define FTM_COMBINE_FAULTEN1_MASK 0x4000u
+#define FTM_COMBINE_FAULTEN1_SHIFT 14
+#define FTM_COMBINE_COMBINE2_MASK 0x10000u
+#define FTM_COMBINE_COMBINE2_SHIFT 16
+#define FTM_COMBINE_COMP2_MASK 0x20000u
+#define FTM_COMBINE_COMP2_SHIFT 17
+#define FTM_COMBINE_DECAPEN2_MASK 0x40000u
+#define FTM_COMBINE_DECAPEN2_SHIFT 18
+#define FTM_COMBINE_DECAP2_MASK 0x80000u
+#define FTM_COMBINE_DECAP2_SHIFT 19
+#define FTM_COMBINE_DTEN2_MASK 0x100000u
+#define FTM_COMBINE_DTEN2_SHIFT 20
+#define FTM_COMBINE_SYNCEN2_MASK 0x200000u
+#define FTM_COMBINE_SYNCEN2_SHIFT 21
+#define FTM_COMBINE_FAULTEN2_MASK 0x400000u
+#define FTM_COMBINE_FAULTEN2_SHIFT 22
+#define FTM_COMBINE_COMBINE3_MASK 0x1000000u
+#define FTM_COMBINE_COMBINE3_SHIFT 24
+#define FTM_COMBINE_COMP3_MASK 0x2000000u
+#define FTM_COMBINE_COMP3_SHIFT 25
+#define FTM_COMBINE_DECAPEN3_MASK 0x4000000u
+#define FTM_COMBINE_DECAPEN3_SHIFT 26
+#define FTM_COMBINE_DECAP3_MASK 0x8000000u
+#define FTM_COMBINE_DECAP3_SHIFT 27
+#define FTM_COMBINE_DTEN3_MASK 0x10000000u
+#define FTM_COMBINE_DTEN3_SHIFT 28
+#define FTM_COMBINE_SYNCEN3_MASK 0x20000000u
+#define FTM_COMBINE_SYNCEN3_SHIFT 29
+#define FTM_COMBINE_FAULTEN3_MASK 0x40000000u
+#define FTM_COMBINE_FAULTEN3_SHIFT 30
+/* DEADTIME Bit Fields */
+#define FTM_DEADTIME_DTVAL_MASK 0x3Fu
+#define FTM_DEADTIME_DTVAL_SHIFT 0
+#define FTM_DEADTIME_DTVAL(x) (((uint32_t)(((uint32_t)(x))<<FTM_DEADTIME_DTVAL_SHIFT))&FTM_DEADTIME_DTVAL_MASK)
+#define FTM_DEADTIME_DTPS_MASK 0xC0u
+#define FTM_DEADTIME_DTPS_SHIFT 6
+#define FTM_DEADTIME_DTPS(x) (((uint32_t)(((uint32_t)(x))<<FTM_DEADTIME_DTPS_SHIFT))&FTM_DEADTIME_DTPS_MASK)
+/* EXTTRIG Bit Fields */
+#define FTM_EXTTRIG_CH2TRIG_MASK 0x1u
+#define FTM_EXTTRIG_CH2TRIG_SHIFT 0
+#define FTM_EXTTRIG_CH3TRIG_MASK 0x2u
+#define FTM_EXTTRIG_CH3TRIG_SHIFT 1
+#define FTM_EXTTRIG_CH4TRIG_MASK 0x4u
+#define FTM_EXTTRIG_CH4TRIG_SHIFT 2
+#define FTM_EXTTRIG_CH5TRIG_MASK 0x8u
+#define FTM_EXTTRIG_CH5TRIG_SHIFT 3
+#define FTM_EXTTRIG_CH0TRIG_MASK 0x10u
+#define FTM_EXTTRIG_CH0TRIG_SHIFT 4
+#define FTM_EXTTRIG_CH1TRIG_MASK 0x20u
+#define FTM_EXTTRIG_CH1TRIG_SHIFT 5
+#define FTM_EXTTRIG_INITTRIGEN_MASK 0x40u
+#define FTM_EXTTRIG_INITTRIGEN_SHIFT 6
+#define FTM_EXTTRIG_TRIGF_MASK 0x80u
+#define FTM_EXTTRIG_TRIGF_SHIFT 7
+/* POL Bit Fields */
+#define FTM_POL_POL0_MASK 0x1u
+#define FTM_POL_POL0_SHIFT 0
+#define FTM_POL_POL1_MASK 0x2u
+#define FTM_POL_POL1_SHIFT 1
+#define FTM_POL_POL2_MASK 0x4u
+#define FTM_POL_POL2_SHIFT 2
+#define FTM_POL_POL3_MASK 0x8u
+#define FTM_POL_POL3_SHIFT 3
+#define FTM_POL_POL4_MASK 0x10u
+#define FTM_POL_POL4_SHIFT 4
+#define FTM_POL_POL5_MASK 0x20u
+#define FTM_POL_POL5_SHIFT 5
+#define FTM_POL_POL6_MASK 0x40u
+#define FTM_POL_POL6_SHIFT 6
+#define FTM_POL_POL7_MASK 0x80u
+#define FTM_POL_POL7_SHIFT 7
+/* FMS Bit Fields */
+#define FTM_FMS_FAULTF0_MASK 0x1u
+#define FTM_FMS_FAULTF0_SHIFT 0
+#define FTM_FMS_FAULTF1_MASK 0x2u
+#define FTM_FMS_FAULTF1_SHIFT 1
+#define FTM_FMS_FAULTF2_MASK 0x4u
+#define FTM_FMS_FAULTF2_SHIFT 2
+#define FTM_FMS_FAULTF3_MASK 0x8u
+#define FTM_FMS_FAULTF3_SHIFT 3
+#define FTM_FMS_FAULTIN_MASK 0x20u
+#define FTM_FMS_FAULTIN_SHIFT 5
+#define FTM_FMS_WPEN_MASK 0x40u
+#define FTM_FMS_WPEN_SHIFT 6
+#define FTM_FMS_FAULTF_MASK 0x80u
+#define FTM_FMS_FAULTF_SHIFT 7
+/* FILTER Bit Fields */
+#define FTM_FILTER_CH0FVAL_MASK 0xFu
+#define FTM_FILTER_CH0FVAL_SHIFT 0
+#define FTM_FILTER_CH0FVAL(x) (((uint32_t)(((uint32_t)(x))<<FTM_FILTER_CH0FVAL_SHIFT))&FTM_FILTER_CH0FVAL_MASK)
+#define FTM_FILTER_CH1FVAL_MASK 0xF0u
+#define FTM_FILTER_CH1FVAL_SHIFT 4
+#define FTM_FILTER_CH1FVAL(x) (((uint32_t)(((uint32_t)(x))<<FTM_FILTER_CH1FVAL_SHIFT))&FTM_FILTER_CH1FVAL_MASK)
+#define FTM_FILTER_CH2FVAL_MASK 0xF00u
+#define FTM_FILTER_CH2FVAL_SHIFT 8
+#define FTM_FILTER_CH2FVAL(x) (((uint32_t)(((uint32_t)(x))<<FTM_FILTER_CH2FVAL_SHIFT))&FTM_FILTER_CH2FVAL_MASK)
+#define FTM_FILTER_CH3FVAL_MASK 0xF000u
+#define FTM_FILTER_CH3FVAL_SHIFT 12
+#define FTM_FILTER_CH3FVAL(x) (((uint32_t)(((uint32_t)(x))<<FTM_FILTER_CH3FVAL_SHIFT))&FTM_FILTER_CH3FVAL_MASK)
+/* FLTCTRL Bit Fields */
+#define FTM_FLTCTRL_FAULT0EN_MASK 0x1u
+#define FTM_FLTCTRL_FAULT0EN_SHIFT 0
+#define FTM_FLTCTRL_FAULT1EN_MASK 0x2u
+#define FTM_FLTCTRL_FAULT1EN_SHIFT 1
+#define FTM_FLTCTRL_FAULT2EN_MASK 0x4u
+#define FTM_FLTCTRL_FAULT2EN_SHIFT 2
+#define FTM_FLTCTRL_FAULT3EN_MASK 0x8u
+#define FTM_FLTCTRL_FAULT3EN_SHIFT 3
+#define FTM_FLTCTRL_FFLTR0EN_MASK 0x10u
+#define FTM_FLTCTRL_FFLTR0EN_SHIFT 4
+#define FTM_FLTCTRL_FFLTR1EN_MASK 0x20u
+#define FTM_FLTCTRL_FFLTR1EN_SHIFT 5
+#define FTM_FLTCTRL_FFLTR2EN_MASK 0x40u
+#define FTM_FLTCTRL_FFLTR2EN_SHIFT 6
+#define FTM_FLTCTRL_FFLTR3EN_MASK 0x80u
+#define FTM_FLTCTRL_FFLTR3EN_SHIFT 7
+#define FTM_FLTCTRL_FFVAL_MASK 0xF00u
+#define FTM_FLTCTRL_FFVAL_SHIFT 8
+#define FTM_FLTCTRL_FFVAL(x) (((uint32_t)(((uint32_t)(x))<<FTM_FLTCTRL_FFVAL_SHIFT))&FTM_FLTCTRL_FFVAL_MASK)
+/* QDCTRL Bit Fields */
+#define FTM_QDCTRL_QUADEN_MASK 0x1u
+#define FTM_QDCTRL_QUADEN_SHIFT 0
+#define FTM_QDCTRL_TOFDIR_MASK 0x2u
+#define FTM_QDCTRL_TOFDIR_SHIFT 1
+#define FTM_QDCTRL_QUADIR_MASK 0x4u
+#define FTM_QDCTRL_QUADIR_SHIFT 2
+#define FTM_QDCTRL_QUADMODE_MASK 0x8u
+#define FTM_QDCTRL_QUADMODE_SHIFT 3
+#define FTM_QDCTRL_PHBPOL_MASK 0x10u
+#define FTM_QDCTRL_PHBPOL_SHIFT 4
+#define FTM_QDCTRL_PHAPOL_MASK 0x20u
+#define FTM_QDCTRL_PHAPOL_SHIFT 5
+#define FTM_QDCTRL_PHBFLTREN_MASK 0x40u
+#define FTM_QDCTRL_PHBFLTREN_SHIFT 6
+#define FTM_QDCTRL_PHAFLTREN_MASK 0x80u
+#define FTM_QDCTRL_PHAFLTREN_SHIFT 7
+/* CONF Bit Fields */
+#define FTM_CONF_NUMTOF_MASK 0x1Fu
+#define FTM_CONF_NUMTOF_SHIFT 0
+#define FTM_CONF_NUMTOF(x) (((uint32_t)(((uint32_t)(x))<<FTM_CONF_NUMTOF_SHIFT))&FTM_CONF_NUMTOF_MASK)
+#define FTM_CONF_BDMMODE_MASK 0xC0u
+#define FTM_CONF_BDMMODE_SHIFT 6
+#define FTM_CONF_BDMMODE(x) (((uint32_t)(((uint32_t)(x))<<FTM_CONF_BDMMODE_SHIFT))&FTM_CONF_BDMMODE_MASK)
+#define FTM_CONF_GTBEEN_MASK 0x200u
+#define FTM_CONF_GTBEEN_SHIFT 9
+#define FTM_CONF_GTBEOUT_MASK 0x400u
+#define FTM_CONF_GTBEOUT_SHIFT 10
+/* FLTPOL Bit Fields */
+#define FTM_FLTPOL_FLT0POL_MASK 0x1u
+#define FTM_FLTPOL_FLT0POL_SHIFT 0
+#define FTM_FLTPOL_FLT1POL_MASK 0x2u
+#define FTM_FLTPOL_FLT1POL_SHIFT 1
+#define FTM_FLTPOL_FLT2POL_MASK 0x4u
+#define FTM_FLTPOL_FLT2POL_SHIFT 2
+#define FTM_FLTPOL_FLT3POL_MASK 0x8u
+#define FTM_FLTPOL_FLT3POL_SHIFT 3
+/* SYNCONF Bit Fields */
+#define FTM_SYNCONF_HWTRIGMODE_MASK 0x1u
+#define FTM_SYNCONF_HWTRIGMODE_SHIFT 0
+#define FTM_SYNCONF_CNTINC_MASK 0x4u
+#define FTM_SYNCONF_CNTINC_SHIFT 2
+#define FTM_SYNCONF_INVC_MASK 0x10u
+#define FTM_SYNCONF_INVC_SHIFT 4
+#define FTM_SYNCONF_SWOC_MASK 0x20u
+#define FTM_SYNCONF_SWOC_SHIFT 5
+#define FTM_SYNCONF_SYNCMODE_MASK 0x80u
+#define FTM_SYNCONF_SYNCMODE_SHIFT 7
+#define FTM_SYNCONF_SWRSTCNT_MASK 0x100u
+#define FTM_SYNCONF_SWRSTCNT_SHIFT 8
+#define FTM_SYNCONF_SWWRBUF_MASK 0x200u
+#define FTM_SYNCONF_SWWRBUF_SHIFT 9
+#define FTM_SYNCONF_SWOM_MASK 0x400u
+#define FTM_SYNCONF_SWOM_SHIFT 10
+#define FTM_SYNCONF_SWINVC_MASK 0x800u
+#define FTM_SYNCONF_SWINVC_SHIFT 11
+#define FTM_SYNCONF_SWSOC_MASK 0x1000u
+#define FTM_SYNCONF_SWSOC_SHIFT 12
+#define FTM_SYNCONF_HWRSTCNT_MASK 0x10000u
+#define FTM_SYNCONF_HWRSTCNT_SHIFT 16
+#define FTM_SYNCONF_HWWRBUF_MASK 0x20000u
+#define FTM_SYNCONF_HWWRBUF_SHIFT 17
+#define FTM_SYNCONF_HWOM_MASK 0x40000u
+#define FTM_SYNCONF_HWOM_SHIFT 18
+#define FTM_SYNCONF_HWINVC_MASK 0x80000u
+#define FTM_SYNCONF_HWINVC_SHIFT 19
+#define FTM_SYNCONF_HWSOC_MASK 0x100000u
+#define FTM_SYNCONF_HWSOC_SHIFT 20
+/* INVCTRL Bit Fields */
+#define FTM_INVCTRL_INV0EN_MASK 0x1u
+#define FTM_INVCTRL_INV0EN_SHIFT 0
+#define FTM_INVCTRL_INV1EN_MASK 0x2u
+#define FTM_INVCTRL_INV1EN_SHIFT 1
+#define FTM_INVCTRL_INV2EN_MASK 0x4u
+#define FTM_INVCTRL_INV2EN_SHIFT 2
+#define FTM_INVCTRL_INV3EN_MASK 0x8u
+#define FTM_INVCTRL_INV3EN_SHIFT 3
+/* SWOCTRL Bit Fields */
+#define FTM_SWOCTRL_CH0OC_MASK 0x1u
+#define FTM_SWOCTRL_CH0OC_SHIFT 0
+#define FTM_SWOCTRL_CH1OC_MASK 0x2u
+#define FTM_SWOCTRL_CH1OC_SHIFT 1
+#define FTM_SWOCTRL_CH2OC_MASK 0x4u
+#define FTM_SWOCTRL_CH2OC_SHIFT 2
+#define FTM_SWOCTRL_CH3OC_MASK 0x8u
+#define FTM_SWOCTRL_CH3OC_SHIFT 3
+#define FTM_SWOCTRL_CH4OC_MASK 0x10u
+#define FTM_SWOCTRL_CH4OC_SHIFT 4
+#define FTM_SWOCTRL_CH5OC_MASK 0x20u
+#define FTM_SWOCTRL_CH5OC_SHIFT 5
+#define FTM_SWOCTRL_CH6OC_MASK 0x40u
+#define FTM_SWOCTRL_CH6OC_SHIFT 6
+#define FTM_SWOCTRL_CH7OC_MASK 0x80u
+#define FTM_SWOCTRL_CH7OC_SHIFT 7
+#define FTM_SWOCTRL_CH0OCV_MASK 0x100u
+#define FTM_SWOCTRL_CH0OCV_SHIFT 8
+#define FTM_SWOCTRL_CH1OCV_MASK 0x200u
+#define FTM_SWOCTRL_CH1OCV_SHIFT 9
+#define FTM_SWOCTRL_CH2OCV_MASK 0x400u
+#define FTM_SWOCTRL_CH2OCV_SHIFT 10
+#define FTM_SWOCTRL_CH3OCV_MASK 0x800u
+#define FTM_SWOCTRL_CH3OCV_SHIFT 11
+#define FTM_SWOCTRL_CH4OCV_MASK 0x1000u
+#define FTM_SWOCTRL_CH4OCV_SHIFT 12
+#define FTM_SWOCTRL_CH5OCV_MASK 0x2000u
+#define FTM_SWOCTRL_CH5OCV_SHIFT 13
+#define FTM_SWOCTRL_CH6OCV_MASK 0x4000u
+#define FTM_SWOCTRL_CH6OCV_SHIFT 14
+#define FTM_SWOCTRL_CH7OCV_MASK 0x8000u
+#define FTM_SWOCTRL_CH7OCV_SHIFT 15
+/* PWMLOAD Bit Fields */
+#define FTM_PWMLOAD_CH0SEL_MASK 0x1u
+#define FTM_PWMLOAD_CH0SEL_SHIFT 0
+#define FTM_PWMLOAD_CH1SEL_MASK 0x2u
+#define FTM_PWMLOAD_CH1SEL_SHIFT 1
+#define FTM_PWMLOAD_CH2SEL_MASK 0x4u
+#define FTM_PWMLOAD_CH2SEL_SHIFT 2
+#define FTM_PWMLOAD_CH3SEL_MASK 0x8u
+#define FTM_PWMLOAD_CH3SEL_SHIFT 3
+#define FTM_PWMLOAD_CH4SEL_MASK 0x10u
+#define FTM_PWMLOAD_CH4SEL_SHIFT 4
+#define FTM_PWMLOAD_CH5SEL_MASK 0x20u
+#define FTM_PWMLOAD_CH5SEL_SHIFT 5
+#define FTM_PWMLOAD_CH6SEL_MASK 0x40u
+#define FTM_PWMLOAD_CH6SEL_SHIFT 6
+#define FTM_PWMLOAD_CH7SEL_MASK 0x80u
+#define FTM_PWMLOAD_CH7SEL_SHIFT 7
+#define FTM_PWMLOAD_LDOK_MASK 0x200u
+#define FTM_PWMLOAD_LDOK_SHIFT 9
+
+/**
+ * @}
+ */ /* end of group FTM_Register_Masks */
+
+
+/* FTM - Peripheral instance base addresses */
+/** Peripheral FTM0 base address */
+#define FTM0_BASE (0x40038000u)
+/** Peripheral FTM0 base pointer */
+#define FTM0 ((FTM_Type *)FTM0_BASE)
+/** Peripheral FTM1 base address */
+#define FTM1_BASE (0x40039000u)
+/** Peripheral FTM1 base pointer */
+#define FTM1 ((FTM_Type *)FTM1_BASE)
+
+/**
+ * @}
+ */ /* end of group FTM_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- GPIO Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup GPIO_Peripheral_Access_Layer GPIO Peripheral Access Layer
+ * @{
+ */
+
+/** GPIO - Register Layout Typedef */
+typedef struct {
+ __IO uint32_t PDOR; /**< Port Data Output Register, offset: 0x0 */
+ __O uint32_t PSOR; /**< Port Set Output Register, offset: 0x4 */
+ __O uint32_t PCOR; /**< Port Clear Output Register, offset: 0x8 */
+ __O uint32_t PTOR; /**< Port Toggle Output Register, offset: 0xC */
+ __I uint32_t PDIR; /**< Port Data Input Register, offset: 0x10 */
+ __IO uint32_t PDDR; /**< Port Data Direction Register, offset: 0x14 */
+} GPIO_Type;
+
+/* ----------------------------------------------------------------------------
+ -- GPIO Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup GPIO_Register_Masks GPIO Register Masks
+ * @{
+ */
+
+/* PDOR Bit Fields */
+#define GPIO_PDOR_PDO_MASK 0xFFFFFFFFu
+#define GPIO_PDOR_PDO_SHIFT 0
+#define GPIO_PDOR_PDO(x) (((uint32_t)(((uint32_t)(x))<<GPIO_PDOR_PDO_SHIFT))&GPIO_PDOR_PDO_MASK)
+/* PSOR Bit Fields */
+#define GPIO_PSOR_PTSO_MASK 0xFFFFFFFFu
+#define GPIO_PSOR_PTSO_SHIFT 0
+#define GPIO_PSOR_PTSO(x) (((uint32_t)(((uint32_t)(x))<<GPIO_PSOR_PTSO_SHIFT))&GPIO_PSOR_PTSO_MASK)
+/* PCOR Bit Fields */
+#define GPIO_PCOR_PTCO_MASK 0xFFFFFFFFu
+#define GPIO_PCOR_PTCO_SHIFT 0
+#define GPIO_PCOR_PTCO(x) (((uint32_t)(((uint32_t)(x))<<GPIO_PCOR_PTCO_SHIFT))&GPIO_PCOR_PTCO_MASK)
+/* PTOR Bit Fields */
+#define GPIO_PTOR_PTTO_MASK 0xFFFFFFFFu
+#define GPIO_PTOR_PTTO_SHIFT 0
+#define GPIO_PTOR_PTTO(x) (((uint32_t)(((uint32_t)(x))<<GPIO_PTOR_PTTO_SHIFT))&GPIO_PTOR_PTTO_MASK)
+/* PDIR Bit Fields */
+#define GPIO_PDIR_PDI_MASK 0xFFFFFFFFu
+#define GPIO_PDIR_PDI_SHIFT 0
+#define GPIO_PDIR_PDI(x) (((uint32_t)(((uint32_t)(x))<<GPIO_PDIR_PDI_SHIFT))&GPIO_PDIR_PDI_MASK)
+/* PDDR Bit Fields */
+#define GPIO_PDDR_PDD_MASK 0xFFFFFFFFu
+#define GPIO_PDDR_PDD_SHIFT 0
+#define GPIO_PDDR_PDD(x) (((uint32_t)(((uint32_t)(x))<<GPIO_PDDR_PDD_SHIFT))&GPIO_PDDR_PDD_MASK)
+
+/**
+ * @}
+ */ /* end of group GPIO_Register_Masks */
+
+
+/* GPIO - Peripheral instance base addresses */
+/** Peripheral PTA base address */
+#define PTA_BASE (0x400FF000u)
+/** Peripheral PTA base pointer */
+#define PTA ((GPIO_Type *)PTA_BASE)
+/** Peripheral PTB base address */
+#define PTB_BASE (0x400FF040u)
+/** Peripheral PTB base pointer */
+#define PTB ((GPIO_Type *)PTB_BASE)
+/** Peripheral PTC base address */
+#define PTC_BASE (0x400FF080u)
+/** Peripheral PTC base pointer */
+#define PTC ((GPIO_Type *)PTC_BASE)
+/** Peripheral PTD base address */
+#define PTD_BASE (0x400FF0C0u)
+/** Peripheral PTD base pointer */
+#define PTD ((GPIO_Type *)PTD_BASE)
+/** Peripheral PTE base address */
+#define PTE_BASE (0x400FF100u)
+/** Peripheral PTE base pointer */
+#define PTE ((GPIO_Type *)PTE_BASE)
+
+/**
+ * @}
+ */ /* end of group GPIO_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- I2C Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup I2C_Peripheral_Access_Layer I2C Peripheral Access Layer
+ * @{
+ */
+
+/** I2C - Register Layout Typedef */
+typedef struct {
+ __IO uint8_t A1; /**< I2C Address Register 1, offset: 0x0 */
+ __IO uint8_t F; /**< I2C Frequency Divider register, offset: 0x1 */
+ __IO uint8_t C1; /**< I2C Control Register 1, offset: 0x2 */
+ __IO uint8_t S; /**< I2C Status Register, offset: 0x3 */
+ __IO uint8_t D; /**< I2C Data I/O register, offset: 0x4 */
+ __IO uint8_t C2; /**< I2C Control Register 2, offset: 0x5 */
+ __IO uint8_t FLT; /**< I2C Programmable Input Glitch Filter register, offset: 0x6 */
+ __IO uint8_t RA; /**< I2C Range Address register, offset: 0x7 */
+ __IO uint8_t SMB; /**< I2C SMBus Control and Status register, offset: 0x8 */
+ __IO uint8_t A2; /**< I2C Address Register 2, offset: 0x9 */
+ __IO uint8_t SLTH; /**< I2C SCL Low Timeout Register High, offset: 0xA */
+ __IO uint8_t SLTL; /**< I2C SCL Low Timeout Register Low, offset: 0xB */
+} I2C_Type;
+
+/* ----------------------------------------------------------------------------
+ -- I2C Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup I2C_Register_Masks I2C Register Masks
+ * @{
+ */
+
+/* A1 Bit Fields */
+#define I2C_A1_AD_MASK 0xFEu
+#define I2C_A1_AD_SHIFT 1
+#define I2C_A1_AD(x) (((uint8_t)(((uint8_t)(x))<<I2C_A1_AD_SHIFT))&I2C_A1_AD_MASK)
+/* F Bit Fields */
+#define I2C_F_ICR_MASK 0x3Fu
+#define I2C_F_ICR_SHIFT 0
+#define I2C_F_ICR(x) (((uint8_t)(((uint8_t)(x))<<I2C_F_ICR_SHIFT))&I2C_F_ICR_MASK)
+#define I2C_F_MULT_MASK 0xC0u
+#define I2C_F_MULT_SHIFT 6
+#define I2C_F_MULT(x) (((uint8_t)(((uint8_t)(x))<<I2C_F_MULT_SHIFT))&I2C_F_MULT_MASK)
+/* C1 Bit Fields */
+#define I2C_C1_DMAEN_MASK 0x1u
+#define I2C_C1_DMAEN_SHIFT 0
+#define I2C_C1_WUEN_MASK 0x2u
+#define I2C_C1_WUEN_SHIFT 1
+#define I2C_C1_RSTA_MASK 0x4u
+#define I2C_C1_RSTA_SHIFT 2
+#define I2C_C1_TXAK_MASK 0x8u
+#define I2C_C1_TXAK_SHIFT 3
+#define I2C_C1_TX_MASK 0x10u
+#define I2C_C1_TX_SHIFT 4
+#define I2C_C1_MST_MASK 0x20u
+#define I2C_C1_MST_SHIFT 5
+#define I2C_C1_IICIE_MASK 0x40u
+#define I2C_C1_IICIE_SHIFT 6
+#define I2C_C1_IICEN_MASK 0x80u
+#define I2C_C1_IICEN_SHIFT 7
+/* S Bit Fields */
+#define I2C_S_RXAK_MASK 0x1u
+#define I2C_S_RXAK_SHIFT 0
+#define I2C_S_IICIF_MASK 0x2u
+#define I2C_S_IICIF_SHIFT 1
+#define I2C_S_SRW_MASK 0x4u
+#define I2C_S_SRW_SHIFT 2
+#define I2C_S_RAM_MASK 0x8u
+#define I2C_S_RAM_SHIFT 3
+#define I2C_S_ARBL_MASK 0x10u
+#define I2C_S_ARBL_SHIFT 4
+#define I2C_S_BUSY_MASK 0x20u
+#define I2C_S_BUSY_SHIFT 5
+#define I2C_S_IAAS_MASK 0x40u
+#define I2C_S_IAAS_SHIFT 6
+#define I2C_S_TCF_MASK 0x80u
+#define I2C_S_TCF_SHIFT 7
+/* D Bit Fields */
+#define I2C_D_DATA_MASK 0xFFu
+#define I2C_D_DATA_SHIFT 0
+#define I2C_D_DATA(x) (((uint8_t)(((uint8_t)(x))<<I2C_D_DATA_SHIFT))&I2C_D_DATA_MASK)
+/* C2 Bit Fields */
+#define I2C_C2_AD_MASK 0x7u
+#define I2C_C2_AD_SHIFT 0
+#define I2C_C2_AD(x) (((uint8_t)(((uint8_t)(x))<<I2C_C2_AD_SHIFT))&I2C_C2_AD_MASK)
+#define I2C_C2_RMEN_MASK 0x8u
+#define I2C_C2_RMEN_SHIFT 3
+#define I2C_C2_SBRC_MASK 0x10u
+#define I2C_C2_SBRC_SHIFT 4
+#define I2C_C2_HDRS_MASK 0x20u
+#define I2C_C2_HDRS_SHIFT 5
+#define I2C_C2_ADEXT_MASK 0x40u
+#define I2C_C2_ADEXT_SHIFT 6
+#define I2C_C2_GCAEN_MASK 0x80u
+#define I2C_C2_GCAEN_SHIFT 7
+/* FLT Bit Fields */
+#define I2C_FLT_FLT_MASK 0x1Fu
+#define I2C_FLT_FLT_SHIFT 0
+#define I2C_FLT_FLT(x) (((uint8_t)(((uint8_t)(x))<<I2C_FLT_FLT_SHIFT))&I2C_FLT_FLT_MASK)
+/* RA Bit Fields */
+#define I2C_RA_RAD_MASK 0xFEu
+#define I2C_RA_RAD_SHIFT 1
+#define I2C_RA_RAD(x) (((uint8_t)(((uint8_t)(x))<<I2C_RA_RAD_SHIFT))&I2C_RA_RAD_MASK)
+/* SMB Bit Fields */
+#define I2C_SMB_SHTF2IE_MASK 0x1u
+#define I2C_SMB_SHTF2IE_SHIFT 0
+#define I2C_SMB_SHTF2_MASK 0x2u
+#define I2C_SMB_SHTF2_SHIFT 1
+#define I2C_SMB_SHTF1_MASK 0x4u
+#define I2C_SMB_SHTF1_SHIFT 2
+#define I2C_SMB_SLTF_MASK 0x8u
+#define I2C_SMB_SLTF_SHIFT 3
+#define I2C_SMB_TCKSEL_MASK 0x10u
+#define I2C_SMB_TCKSEL_SHIFT 4
+#define I2C_SMB_SIICAEN_MASK 0x20u
+#define I2C_SMB_SIICAEN_SHIFT 5
+#define I2C_SMB_ALERTEN_MASK 0x40u
+#define I2C_SMB_ALERTEN_SHIFT 6
+#define I2C_SMB_FACK_MASK 0x80u
+#define I2C_SMB_FACK_SHIFT 7
+/* A2 Bit Fields */
+#define I2C_A2_SAD_MASK 0xFEu
+#define I2C_A2_SAD_SHIFT 1
+#define I2C_A2_SAD(x) (((uint8_t)(((uint8_t)(x))<<I2C_A2_SAD_SHIFT))&I2C_A2_SAD_MASK)
+/* SLTH Bit Fields */
+#define I2C_SLTH_SSLT_MASK 0xFFu
+#define I2C_SLTH_SSLT_SHIFT 0
+#define I2C_SLTH_SSLT(x) (((uint8_t)(((uint8_t)(x))<<I2C_SLTH_SSLT_SHIFT))&I2C_SLTH_SSLT_MASK)
+/* SLTL Bit Fields */
+#define I2C_SLTL_SSLT_MASK 0xFFu
+#define I2C_SLTL_SSLT_SHIFT 0
+#define I2C_SLTL_SSLT(x) (((uint8_t)(((uint8_t)(x))<<I2C_SLTL_SSLT_SHIFT))&I2C_SLTL_SSLT_MASK)
+
+/**
+ * @}
+ */ /* end of group I2C_Register_Masks */
+
+
+/* I2C - Peripheral instance base addresses */
+/** Peripheral I2C0 base address */
+#define I2C0_BASE (0x40066000u)
+#define I2C1_BASE (0x40067000u)
+/** Peripheral I2C0 base pointer */
+#define I2C0 ((I2C_Type *)I2C0_BASE)
+#define I2C1 ((I2C_Type *)I2C1_BASE)
+/**
+ * @}
+ */ /* end of group I2C_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- I2S Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup I2S_Peripheral_Access_Layer I2S Peripheral Access Layer
+ * @{
+ */
+
+/** I2S - Register Layout Typedef */
+typedef struct {
+ __IO uint32_t TCSR; /**< SAI Transmit Control Register, offset: 0x0 */
+ __IO uint32_t TCR1; /**< SAI Transmit Configuration 1 Register, offset: 0x4 */
+ __IO uint32_t TCR2; /**< SAI Transmit Configuration 2 Register, offset: 0x8 */
+ __IO uint32_t TCR3; /**< SAI Transmit Configuration 3 Register, offset: 0xC */
+ __IO uint32_t TCR4; /**< SAI Transmit Configuration 4 Register, offset: 0x10 */
+ __IO uint32_t TCR5; /**< SAI Transmit Configuration 5 Register, offset: 0x14 */
+ uint8_t RESERVED_0[8];
+ __O uint32_t TDR[2]; /**< SAI Transmit Data Register, array offset: 0x20, array step: 0x4 */
+ uint8_t RESERVED_1[24];
+ __I uint32_t TFR[2]; /**< SAI Transmit FIFO Register, array offset: 0x40, array step: 0x4 */
+ uint8_t RESERVED_2[24];
+ __IO uint32_t TMR; /**< SAI Transmit Mask Register, offset: 0x60 */
+ uint8_t RESERVED_3[28];
+ __IO uint32_t RCSR; /**< SAI Receive Control Register, offset: 0x80 */
+ __IO uint32_t RCR1; /**< SAI Receive Configuration 1 Register, offset: 0x84 */
+ __IO uint32_t RCR2; /**< SAI Receive Configuration 2 Register, offset: 0x88 */
+ __IO uint32_t RCR3; /**< SAI Receive Configuration 3 Register, offset: 0x8C */
+ __IO uint32_t RCR4; /**< SAI Receive Configuration 4 Register, offset: 0x90 */
+ __IO uint32_t RCR5; /**< SAI Receive Configuration 5 Register, offset: 0x94 */
+ uint8_t RESERVED_4[8];
+ __I uint32_t RDR[2]; /**< SAI Receive Data Register, array offset: 0xA0, array step: 0x4 */
+ uint8_t RESERVED_5[24];
+ __I uint32_t RFR[2]; /**< SAI Receive FIFO Register, array offset: 0xC0, array step: 0x4 */
+ uint8_t RESERVED_6[24];
+ __IO uint32_t RMR; /**< SAI Receive Mask Register, offset: 0xE0 */
+ uint8_t RESERVED_7[28];
+ __IO uint32_t MCR; /**< SAI MCLK Control Register, offset: 0x100 */
+ __IO uint32_t MDR; /**< MCLK Divide Register, offset: 0x104 */
+} I2S_Type;
+
+/* ----------------------------------------------------------------------------
+ -- I2S Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup I2S_Register_Masks I2S Register Masks
+ * @{
+ */
+
+/* TCSR Bit Fields */
+#define I2S_TCSR_FRDE_MASK 0x1u
+#define I2S_TCSR_FRDE_SHIFT 0
+#define I2S_TCSR_FWDE_MASK 0x2u
+#define I2S_TCSR_FWDE_SHIFT 1
+#define I2S_TCSR_FRIE_MASK 0x100u
+#define I2S_TCSR_FRIE_SHIFT 8
+#define I2S_TCSR_FWIE_MASK 0x200u
+#define I2S_TCSR_FWIE_SHIFT 9
+#define I2S_TCSR_FEIE_MASK 0x400u
+#define I2S_TCSR_FEIE_SHIFT 10
+#define I2S_TCSR_SEIE_MASK 0x800u
+#define I2S_TCSR_SEIE_SHIFT 11
+#define I2S_TCSR_WSIE_MASK 0x1000u
+#define I2S_TCSR_WSIE_SHIFT 12
+#define I2S_TCSR_FRF_MASK 0x10000u
+#define I2S_TCSR_FRF_SHIFT 16
+#define I2S_TCSR_FWF_MASK 0x20000u
+#define I2S_TCSR_FWF_SHIFT 17
+#define I2S_TCSR_FEF_MASK 0x40000u
+#define I2S_TCSR_FEF_SHIFT 18
+#define I2S_TCSR_SEF_MASK 0x80000u
+#define I2S_TCSR_SEF_SHIFT 19
+#define I2S_TCSR_WSF_MASK 0x100000u
+#define I2S_TCSR_WSF_SHIFT 20
+#define I2S_TCSR_SR_MASK 0x1000000u
+#define I2S_TCSR_SR_SHIFT 24
+#define I2S_TCSR_FR_MASK 0x2000000u
+#define I2S_TCSR_FR_SHIFT 25
+#define I2S_TCSR_BCE_MASK 0x10000000u
+#define I2S_TCSR_BCE_SHIFT 28
+#define I2S_TCSR_DBGE_MASK 0x20000000u
+#define I2S_TCSR_DBGE_SHIFT 29
+#define I2S_TCSR_STOPE_MASK 0x40000000u
+#define I2S_TCSR_STOPE_SHIFT 30
+#define I2S_TCSR_TE_MASK 0x80000000u
+#define I2S_TCSR_TE_SHIFT 31
+/* TCR1 Bit Fields */
+#define I2S_TCR1_TFW_MASK 0x7u
+#define I2S_TCR1_TFW_SHIFT 0
+#define I2S_TCR1_TFW(x) (((uint32_t)(((uint32_t)(x))<<I2S_TCR1_TFW_SHIFT))&I2S_TCR1_TFW_MASK)
+/* TCR2 Bit Fields */
+#define I2S_TCR2_DIV_MASK 0xFFu
+#define I2S_TCR2_DIV_SHIFT 0
+#define I2S_TCR2_DIV(x) (((uint32_t)(((uint32_t)(x))<<I2S_TCR2_DIV_SHIFT))&I2S_TCR2_DIV_MASK)
+#define I2S_TCR2_BCD_MASK 0x1000000u
+#define I2S_TCR2_BCD_SHIFT 24
+#define I2S_TCR2_BCP_MASK 0x2000000u
+#define I2S_TCR2_BCP_SHIFT 25
+#define I2S_TCR2_MSEL_MASK 0xC000000u
+#define I2S_TCR2_MSEL_SHIFT 26
+#define I2S_TCR2_MSEL(x) (((uint32_t)(((uint32_t)(x))<<I2S_TCR2_MSEL_SHIFT))&I2S_TCR2_MSEL_MASK)
+#define I2S_TCR2_BCI_MASK 0x10000000u
+#define I2S_TCR2_BCI_SHIFT 28
+#define I2S_TCR2_BCS_MASK 0x20000000u
+#define I2S_TCR2_BCS_SHIFT 29
+#define I2S_TCR2_SYNC_MASK 0xC0000000u
+#define I2S_TCR2_SYNC_SHIFT 30
+#define I2S_TCR2_SYNC(x) (((uint32_t)(((uint32_t)(x))<<I2S_TCR2_SYNC_SHIFT))&I2S_TCR2_SYNC_MASK)
+/* TCR3 Bit Fields */
+#define I2S_TCR3_WDFL_MASK 0x1Fu
+#define I2S_TCR3_WDFL_SHIFT 0
+#define I2S_TCR3_WDFL(x) (((uint32_t)(((uint32_t)(x))<<I2S_TCR3_WDFL_SHIFT))&I2S_TCR3_WDFL_MASK)
+#define I2S_TCR3_TCE_MASK 0x30000u
+#define I2S_TCR3_TCE_SHIFT 16
+#define I2S_TCR3_TCE(x) (((uint32_t)(((uint32_t)(x))<<I2S_TCR3_TCE_SHIFT))&I2S_TCR3_TCE_MASK)
+/* TCR4 Bit Fields */
+#define I2S_TCR4_FSD_MASK 0x1u
+#define I2S_TCR4_FSD_SHIFT 0
+#define I2S_TCR4_FSP_MASK 0x2u
+#define I2S_TCR4_FSP_SHIFT 1
+#define I2S_TCR4_FSE_MASK 0x8u
+#define I2S_TCR4_FSE_SHIFT 3
+#define I2S_TCR4_MF_MASK 0x10u
+#define I2S_TCR4_MF_SHIFT 4
+#define I2S_TCR4_SYWD_MASK 0x1F00u
+#define I2S_TCR4_SYWD_SHIFT 8
+#define I2S_TCR4_SYWD(x) (((uint32_t)(((uint32_t)(x))<<I2S_TCR4_SYWD_SHIFT))&I2S_TCR4_SYWD_MASK)
+#define I2S_TCR4_FRSZ_MASK 0x1F0000u
+#define I2S_TCR4_FRSZ_SHIFT 16
+#define I2S_TCR4_FRSZ(x) (((uint32_t)(((uint32_t)(x))<<I2S_TCR4_FRSZ_SHIFT))&I2S_TCR4_FRSZ_MASK)
+/* TCR5 Bit Fields */
+#define I2S_TCR5_FBT_MASK 0x1F00u
+#define I2S_TCR5_FBT_SHIFT 8
+#define I2S_TCR5_FBT(x) (((uint32_t)(((uint32_t)(x))<<I2S_TCR5_FBT_SHIFT))&I2S_TCR5_FBT_MASK)
+#define I2S_TCR5_W0W_MASK 0x1F0000u
+#define I2S_TCR5_W0W_SHIFT 16
+#define I2S_TCR5_W0W(x) (((uint32_t)(((uint32_t)(x))<<I2S_TCR5_W0W_SHIFT))&I2S_TCR5_W0W_MASK)
+#define I2S_TCR5_WNW_MASK 0x1F000000u
+#define I2S_TCR5_WNW_SHIFT 24
+#define I2S_TCR5_WNW(x) (((uint32_t)(((uint32_t)(x))<<I2S_TCR5_WNW_SHIFT))&I2S_TCR5_WNW_MASK)
+/* TDR Bit Fields */
+#define I2S_TDR_TDR_MASK 0xFFFFFFFFu
+#define I2S_TDR_TDR_SHIFT 0
+#define I2S_TDR_TDR(x) (((uint32_t)(((uint32_t)(x))<<I2S_TDR_TDR_SHIFT))&I2S_TDR_TDR_MASK)
+/* TFR Bit Fields */
+#define I2S_TFR_RFP_MASK 0xFu
+#define I2S_TFR_RFP_SHIFT 0
+#define I2S_TFR_RFP(x) (((uint32_t)(((uint32_t)(x))<<I2S_TFR_RFP_SHIFT))&I2S_TFR_RFP_MASK)
+#define I2S_TFR_WFP_MASK 0xF0000u
+#define I2S_TFR_WFP_SHIFT 16
+#define I2S_TFR_WFP(x) (((uint32_t)(((uint32_t)(x))<<I2S_TFR_WFP_SHIFT))&I2S_TFR_WFP_MASK)
+/* TMR Bit Fields */
+#define I2S_TMR_TWM_MASK 0xFFFFFFFFu
+#define I2S_TMR_TWM_SHIFT 0
+#define I2S_TMR_TWM(x) (((uint32_t)(((uint32_t)(x))<<I2S_TMR_TWM_SHIFT))&I2S_TMR_TWM_MASK)
+/* RCSR Bit Fields */
+#define I2S_RCSR_FRDE_MASK 0x1u
+#define I2S_RCSR_FRDE_SHIFT 0
+#define I2S_RCSR_FWDE_MASK 0x2u
+#define I2S_RCSR_FWDE_SHIFT 1
+#define I2S_RCSR_FRIE_MASK 0x100u
+#define I2S_RCSR_FRIE_SHIFT 8
+#define I2S_RCSR_FWIE_MASK 0x200u
+#define I2S_RCSR_FWIE_SHIFT 9
+#define I2S_RCSR_FEIE_MASK 0x400u
+#define I2S_RCSR_FEIE_SHIFT 10
+#define I2S_RCSR_SEIE_MASK 0x800u
+#define I2S_RCSR_SEIE_SHIFT 11
+#define I2S_RCSR_WSIE_MASK 0x1000u
+#define I2S_RCSR_WSIE_SHIFT 12
+#define I2S_RCSR_FRF_MASK 0x10000u
+#define I2S_RCSR_FRF_SHIFT 16
+#define I2S_RCSR_FWF_MASK 0x20000u
+#define I2S_RCSR_FWF_SHIFT 17
+#define I2S_RCSR_FEF_MASK 0x40000u
+#define I2S_RCSR_FEF_SHIFT 18
+#define I2S_RCSR_SEF_MASK 0x80000u
+#define I2S_RCSR_SEF_SHIFT 19
+#define I2S_RCSR_WSF_MASK 0x100000u
+#define I2S_RCSR_WSF_SHIFT 20
+#define I2S_RCSR_SR_MASK 0x1000000u
+#define I2S_RCSR_SR_SHIFT 24
+#define I2S_RCSR_FR_MASK 0x2000000u
+#define I2S_RCSR_FR_SHIFT 25
+#define I2S_RCSR_BCE_MASK 0x10000000u
+#define I2S_RCSR_BCE_SHIFT 28
+#define I2S_RCSR_DBGE_MASK 0x20000000u
+#define I2S_RCSR_DBGE_SHIFT 29
+#define I2S_RCSR_STOPE_MASK 0x40000000u
+#define I2S_RCSR_STOPE_SHIFT 30
+#define I2S_RCSR_RE_MASK 0x80000000u
+#define I2S_RCSR_RE_SHIFT 31
+/* RCR1 Bit Fields */
+#define I2S_RCR1_RFW_MASK 0x7u
+#define I2S_RCR1_RFW_SHIFT 0
+#define I2S_RCR1_RFW(x) (((uint32_t)(((uint32_t)(x))<<I2S_RCR1_RFW_SHIFT))&I2S_RCR1_RFW_MASK)
+/* RCR2 Bit Fields */
+#define I2S_RCR2_DIV_MASK 0xFFu
+#define I2S_RCR2_DIV_SHIFT 0
+#define I2S_RCR2_DIV(x) (((uint32_t)(((uint32_t)(x))<<I2S_RCR2_DIV_SHIFT))&I2S_RCR2_DIV_MASK)
+#define I2S_RCR2_BCD_MASK 0x1000000u
+#define I2S_RCR2_BCD_SHIFT 24
+#define I2S_RCR2_BCP_MASK 0x2000000u
+#define I2S_RCR2_BCP_SHIFT 25
+#define I2S_RCR2_MSEL_MASK 0xC000000u
+#define I2S_RCR2_MSEL_SHIFT 26
+#define I2S_RCR2_MSEL(x) (((uint32_t)(((uint32_t)(x))<<I2S_RCR2_MSEL_SHIFT))&I2S_RCR2_MSEL_MASK)
+#define I2S_RCR2_BCI_MASK 0x10000000u
+#define I2S_RCR2_BCI_SHIFT 28
+#define I2S_RCR2_BCS_MASK 0x20000000u
+#define I2S_RCR2_BCS_SHIFT 29
+#define I2S_RCR2_SYNC_MASK 0xC0000000u
+#define I2S_RCR2_SYNC_SHIFT 30
+#define I2S_RCR2_SYNC(x) (((uint32_t)(((uint32_t)(x))<<I2S_RCR2_SYNC_SHIFT))&I2S_RCR2_SYNC_MASK)
+/* RCR3 Bit Fields */
+#define I2S_RCR3_WDFL_MASK 0x1Fu
+#define I2S_RCR3_WDFL_SHIFT 0
+#define I2S_RCR3_WDFL(x) (((uint32_t)(((uint32_t)(x))<<I2S_RCR3_WDFL_SHIFT))&I2S_RCR3_WDFL_MASK)
+#define I2S_RCR3_RCE_MASK 0x30000u
+#define I2S_RCR3_RCE_SHIFT 16
+#define I2S_RCR3_RCE(x) (((uint32_t)(((uint32_t)(x))<<I2S_RCR3_RCE_SHIFT))&I2S_RCR3_RCE_MASK)
+/* RCR4 Bit Fields */
+#define I2S_RCR4_FSD_MASK 0x1u
+#define I2S_RCR4_FSD_SHIFT 0
+#define I2S_RCR4_FSP_MASK 0x2u
+#define I2S_RCR4_FSP_SHIFT 1
+#define I2S_RCR4_FSE_MASK 0x8u
+#define I2S_RCR4_FSE_SHIFT 3
+#define I2S_RCR4_MF_MASK 0x10u
+#define I2S_RCR4_MF_SHIFT 4
+#define I2S_RCR4_SYWD_MASK 0x1F00u
+#define I2S_RCR4_SYWD_SHIFT 8
+#define I2S_RCR4_SYWD(x) (((uint32_t)(((uint32_t)(x))<<I2S_RCR4_SYWD_SHIFT))&I2S_RCR4_SYWD_MASK)
+#define I2S_RCR4_FRSZ_MASK 0x1F0000u
+#define I2S_RCR4_FRSZ_SHIFT 16
+#define I2S_RCR4_FRSZ(x) (((uint32_t)(((uint32_t)(x))<<I2S_RCR4_FRSZ_SHIFT))&I2S_RCR4_FRSZ_MASK)
+/* RCR5 Bit Fields */
+#define I2S_RCR5_FBT_MASK 0x1F00u
+#define I2S_RCR5_FBT_SHIFT 8
+#define I2S_RCR5_FBT(x) (((uint32_t)(((uint32_t)(x))<<I2S_RCR5_FBT_SHIFT))&I2S_RCR5_FBT_MASK)
+#define I2S_RCR5_W0W_MASK 0x1F0000u
+#define I2S_RCR5_W0W_SHIFT 16
+#define I2S_RCR5_W0W(x) (((uint32_t)(((uint32_t)(x))<<I2S_RCR5_W0W_SHIFT))&I2S_RCR5_W0W_MASK)
+#define I2S_RCR5_WNW_MASK 0x1F000000u
+#define I2S_RCR5_WNW_SHIFT 24
+#define I2S_RCR5_WNW(x) (((uint32_t)(((uint32_t)(x))<<I2S_RCR5_WNW_SHIFT))&I2S_RCR5_WNW_MASK)
+/* RDR Bit Fields */
+#define I2S_RDR_RDR_MASK 0xFFFFFFFFu
+#define I2S_RDR_RDR_SHIFT 0
+#define I2S_RDR_RDR(x) (((uint32_t)(((uint32_t)(x))<<I2S_RDR_RDR_SHIFT))&I2S_RDR_RDR_MASK)
+/* RFR Bit Fields */
+#define I2S_RFR_RFP_MASK 0xFu
+#define I2S_RFR_RFP_SHIFT 0
+#define I2S_RFR_RFP(x) (((uint32_t)(((uint32_t)(x))<<I2S_RFR_RFP_SHIFT))&I2S_RFR_RFP_MASK)
+#define I2S_RFR_WFP_MASK 0xF0000u
+#define I2S_RFR_WFP_SHIFT 16
+#define I2S_RFR_WFP(x) (((uint32_t)(((uint32_t)(x))<<I2S_RFR_WFP_SHIFT))&I2S_RFR_WFP_MASK)
+/* RMR Bit Fields */
+#define I2S_RMR_RWM_MASK 0xFFFFFFFFu
+#define I2S_RMR_RWM_SHIFT 0
+#define I2S_RMR_RWM(x) (((uint32_t)(((uint32_t)(x))<<I2S_RMR_RWM_SHIFT))&I2S_RMR_RWM_MASK)
+/* MCR Bit Fields */
+#define I2S_MCR_MICS_MASK 0x3000000u
+#define I2S_MCR_MICS_SHIFT 24
+#define I2S_MCR_MICS(x) (((uint32_t)(((uint32_t)(x))<<I2S_MCR_MICS_SHIFT))&I2S_MCR_MICS_MASK)
+#define I2S_MCR_MOE_MASK 0x40000000u
+#define I2S_MCR_MOE_SHIFT 30
+#define I2S_MCR_DUF_MASK 0x80000000u
+#define I2S_MCR_DUF_SHIFT 31
+/* MDR Bit Fields */
+#define I2S_MDR_DIVIDE_MASK 0xFFFu
+#define I2S_MDR_DIVIDE_SHIFT 0
+#define I2S_MDR_DIVIDE(x) (((uint32_t)(((uint32_t)(x))<<I2S_MDR_DIVIDE_SHIFT))&I2S_MDR_DIVIDE_MASK)
+#define I2S_MDR_FRACT_MASK 0xFF000u
+#define I2S_MDR_FRACT_SHIFT 12
+#define I2S_MDR_FRACT(x) (((uint32_t)(((uint32_t)(x))<<I2S_MDR_FRACT_SHIFT))&I2S_MDR_FRACT_MASK)
+
+/**
+ * @}
+ */ /* end of group I2S_Register_Masks */
+
+
+/* I2S - Peripheral instance base addresses */
+/** Peripheral I2S0 base address */
+#define I2S0_BASE (0x4002F000u)
+/** Peripheral I2S0 base pointer */
+#define I2S0 ((I2S_Type *)I2S0_BASE)
+
+/**
+ * @}
+ */ /* end of group I2S_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- LLWU Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup LLWU_Peripheral_Access_Layer LLWU Peripheral Access Layer
+ * @{
+ */
+
+/** LLWU - Register Layout Typedef */
+typedef struct {
+ __IO uint8_t PE1; /**< LLWU Pin Enable 1 Register, offset: 0x0 */
+ __IO uint8_t PE2; /**< LLWU Pin Enable 2 Register, offset: 0x1 */
+ __IO uint8_t PE3; /**< LLWU Pin Enable 3 Register, offset: 0x2 */
+ __IO uint8_t PE4; /**< LLWU Pin Enable 4 Register, offset: 0x3 */
+ __IO uint8_t ME; /**< LLWU Module Enable Register, offset: 0x4 */
+ __IO uint8_t F1; /**< LLWU Flag 1 Register, offset: 0x5 */
+ __IO uint8_t F2; /**< LLWU Flag 2 Register, offset: 0x6 */
+ __I uint8_t F3; /**< LLWU Flag 3 Register, offset: 0x7 */
+ __IO uint8_t FILT1; /**< LLWU Pin Filter 1 Register, offset: 0x8 */
+ __IO uint8_t FILT2; /**< LLWU Pin Filter 2 Register, offset: 0x9 */
+ __IO uint8_t RST; /**< LLWU Reset Enable Register, offset: 0xA */
+} LLWU_Type;
+
+/* ----------------------------------------------------------------------------
+ -- LLWU Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup LLWU_Register_Masks LLWU Register Masks
+ * @{
+ */
+
+/* PE1 Bit Fields */
+#define LLWU_PE1_WUPE0_MASK 0x3u
+#define LLWU_PE1_WUPE0_SHIFT 0
+#define LLWU_PE1_WUPE0(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE1_WUPE0_SHIFT))&LLWU_PE1_WUPE0_MASK)
+#define LLWU_PE1_WUPE1_MASK 0xCu
+#define LLWU_PE1_WUPE1_SHIFT 2
+#define LLWU_PE1_WUPE1(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE1_WUPE1_SHIFT))&LLWU_PE1_WUPE1_MASK)
+#define LLWU_PE1_WUPE2_MASK 0x30u
+#define LLWU_PE1_WUPE2_SHIFT 4
+#define LLWU_PE1_WUPE2(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE1_WUPE2_SHIFT))&LLWU_PE1_WUPE2_MASK)
+#define LLWU_PE1_WUPE3_MASK 0xC0u
+#define LLWU_PE1_WUPE3_SHIFT 6
+#define LLWU_PE1_WUPE3(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE1_WUPE3_SHIFT))&LLWU_PE1_WUPE3_MASK)
+/* PE2 Bit Fields */
+#define LLWU_PE2_WUPE4_MASK 0x3u
+#define LLWU_PE2_WUPE4_SHIFT 0
+#define LLWU_PE2_WUPE4(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE2_WUPE4_SHIFT))&LLWU_PE2_WUPE4_MASK)
+#define LLWU_PE2_WUPE5_MASK 0xCu
+#define LLWU_PE2_WUPE5_SHIFT 2
+#define LLWU_PE2_WUPE5(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE2_WUPE5_SHIFT))&LLWU_PE2_WUPE5_MASK)
+#define LLWU_PE2_WUPE6_MASK 0x30u
+#define LLWU_PE2_WUPE6_SHIFT 4
+#define LLWU_PE2_WUPE6(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE2_WUPE6_SHIFT))&LLWU_PE2_WUPE6_MASK)
+#define LLWU_PE2_WUPE7_MASK 0xC0u
+#define LLWU_PE2_WUPE7_SHIFT 6
+#define LLWU_PE2_WUPE7(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE2_WUPE7_SHIFT))&LLWU_PE2_WUPE7_MASK)
+/* PE3 Bit Fields */
+#define LLWU_PE3_WUPE8_MASK 0x3u
+#define LLWU_PE3_WUPE8_SHIFT 0
+#define LLWU_PE3_WUPE8(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE3_WUPE8_SHIFT))&LLWU_PE3_WUPE8_MASK)
+#define LLWU_PE3_WUPE9_MASK 0xCu
+#define LLWU_PE3_WUPE9_SHIFT 2
+#define LLWU_PE3_WUPE9(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE3_WUPE9_SHIFT))&LLWU_PE3_WUPE9_MASK)
+#define LLWU_PE3_WUPE10_MASK 0x30u
+#define LLWU_PE3_WUPE10_SHIFT 4
+#define LLWU_PE3_WUPE10(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE3_WUPE10_SHIFT))&LLWU_PE3_WUPE10_MASK)
+#define LLWU_PE3_WUPE11_MASK 0xC0u
+#define LLWU_PE3_WUPE11_SHIFT 6
+#define LLWU_PE3_WUPE11(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE3_WUPE11_SHIFT))&LLWU_PE3_WUPE11_MASK)
+/* PE4 Bit Fields */
+#define LLWU_PE4_WUPE12_MASK 0x3u
+#define LLWU_PE4_WUPE12_SHIFT 0
+#define LLWU_PE4_WUPE12(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE4_WUPE12_SHIFT))&LLWU_PE4_WUPE12_MASK)
+#define LLWU_PE4_WUPE13_MASK 0xCu
+#define LLWU_PE4_WUPE13_SHIFT 2
+#define LLWU_PE4_WUPE13(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE4_WUPE13_SHIFT))&LLWU_PE4_WUPE13_MASK)
+#define LLWU_PE4_WUPE14_MASK 0x30u
+#define LLWU_PE4_WUPE14_SHIFT 4
+#define LLWU_PE4_WUPE14(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE4_WUPE14_SHIFT))&LLWU_PE4_WUPE14_MASK)
+#define LLWU_PE4_WUPE15_MASK 0xC0u
+#define LLWU_PE4_WUPE15_SHIFT 6
+#define LLWU_PE4_WUPE15(x) (((uint8_t)(((uint8_t)(x))<<LLWU_PE4_WUPE15_SHIFT))&LLWU_PE4_WUPE15_MASK)
+/* ME Bit Fields */
+#define LLWU_ME_WUME0_MASK 0x1u
+#define LLWU_ME_WUME0_SHIFT 0
+#define LLWU_ME_WUME1_MASK 0x2u
+#define LLWU_ME_WUME1_SHIFT 1
+#define LLWU_ME_WUME2_MASK 0x4u
+#define LLWU_ME_WUME2_SHIFT 2
+#define LLWU_ME_WUME3_MASK 0x8u
+#define LLWU_ME_WUME3_SHIFT 3
+#define LLWU_ME_WUME4_MASK 0x10u
+#define LLWU_ME_WUME4_SHIFT 4
+#define LLWU_ME_WUME5_MASK 0x20u
+#define LLWU_ME_WUME5_SHIFT 5
+#define LLWU_ME_WUME6_MASK 0x40u
+#define LLWU_ME_WUME6_SHIFT 6
+#define LLWU_ME_WUME7_MASK 0x80u
+#define LLWU_ME_WUME7_SHIFT 7
+/* F1 Bit Fields */
+#define LLWU_F1_WUF0_MASK 0x1u
+#define LLWU_F1_WUF0_SHIFT 0
+#define LLWU_F1_WUF1_MASK 0x2u
+#define LLWU_F1_WUF1_SHIFT 1
+#define LLWU_F1_WUF2_MASK 0x4u
+#define LLWU_F1_WUF2_SHIFT 2
+#define LLWU_F1_WUF3_MASK 0x8u
+#define LLWU_F1_WUF3_SHIFT 3
+#define LLWU_F1_WUF4_MASK 0x10u
+#define LLWU_F1_WUF4_SHIFT 4
+#define LLWU_F1_WUF5_MASK 0x20u
+#define LLWU_F1_WUF5_SHIFT 5
+#define LLWU_F1_WUF6_MASK 0x40u
+#define LLWU_F1_WUF6_SHIFT 6
+#define LLWU_F1_WUF7_MASK 0x80u
+#define LLWU_F1_WUF7_SHIFT 7
+/* F2 Bit Fields */
+#define LLWU_F2_WUF8_MASK 0x1u
+#define LLWU_F2_WUF8_SHIFT 0
+#define LLWU_F2_WUF9_MASK 0x2u
+#define LLWU_F2_WUF9_SHIFT 1
+#define LLWU_F2_WUF10_MASK 0x4u
+#define LLWU_F2_WUF10_SHIFT 2
+#define LLWU_F2_WUF11_MASK 0x8u
+#define LLWU_F2_WUF11_SHIFT 3
+#define LLWU_F2_WUF12_MASK 0x10u
+#define LLWU_F2_WUF12_SHIFT 4
+#define LLWU_F2_WUF13_MASK 0x20u
+#define LLWU_F2_WUF13_SHIFT 5
+#define LLWU_F2_WUF14_MASK 0x40u
+#define LLWU_F2_WUF14_SHIFT 6
+#define LLWU_F2_WUF15_MASK 0x80u
+#define LLWU_F2_WUF15_SHIFT 7
+/* F3 Bit Fields */
+#define LLWU_F3_MWUF0_MASK 0x1u
+#define LLWU_F3_MWUF0_SHIFT 0
+#define LLWU_F3_MWUF1_MASK 0x2u
+#define LLWU_F3_MWUF1_SHIFT 1
+#define LLWU_F3_MWUF2_MASK 0x4u
+#define LLWU_F3_MWUF2_SHIFT 2
+#define LLWU_F3_MWUF3_MASK 0x8u
+#define LLWU_F3_MWUF3_SHIFT 3
+#define LLWU_F3_MWUF4_MASK 0x10u
+#define LLWU_F3_MWUF4_SHIFT 4
+#define LLWU_F3_MWUF5_MASK 0x20u
+#define LLWU_F3_MWUF5_SHIFT 5
+#define LLWU_F3_MWUF6_MASK 0x40u
+#define LLWU_F3_MWUF6_SHIFT 6
+#define LLWU_F3_MWUF7_MASK 0x80u
+#define LLWU_F3_MWUF7_SHIFT 7
+/* FILT1 Bit Fields */
+#define LLWU_FILT1_FILTSEL_MASK 0xFu
+#define LLWU_FILT1_FILTSEL_SHIFT 0
+#define LLWU_FILT1_FILTSEL(x) (((uint8_t)(((uint8_t)(x))<<LLWU_FILT1_FILTSEL_SHIFT))&LLWU_FILT1_FILTSEL_MASK)
+#define LLWU_FILT1_FILTE_MASK 0x60u
+#define LLWU_FILT1_FILTE_SHIFT 5
+#define LLWU_FILT1_FILTE(x) (((uint8_t)(((uint8_t)(x))<<LLWU_FILT1_FILTE_SHIFT))&LLWU_FILT1_FILTE_MASK)
+#define LLWU_FILT1_FILTF_MASK 0x80u
+#define LLWU_FILT1_FILTF_SHIFT 7
+/* FILT2 Bit Fields */
+#define LLWU_FILT2_FILTSEL_MASK 0xFu
+#define LLWU_FILT2_FILTSEL_SHIFT 0
+#define LLWU_FILT2_FILTSEL(x) (((uint8_t)(((uint8_t)(x))<<LLWU_FILT2_FILTSEL_SHIFT))&LLWU_FILT2_FILTSEL_MASK)
+#define LLWU_FILT2_FILTE_MASK 0x60u
+#define LLWU_FILT2_FILTE_SHIFT 5
+#define LLWU_FILT2_FILTE(x) (((uint8_t)(((uint8_t)(x))<<LLWU_FILT2_FILTE_SHIFT))&LLWU_FILT2_FILTE_MASK)
+#define LLWU_FILT2_FILTF_MASK 0x80u
+#define LLWU_FILT2_FILTF_SHIFT 7
+/* RST Bit Fields */
+#define LLWU_RST_RSTFILT_MASK 0x1u
+#define LLWU_RST_RSTFILT_SHIFT 0
+#define LLWU_RST_LLRSTE_MASK 0x2u
+#define LLWU_RST_LLRSTE_SHIFT 1
+
+/**
+ * @}
+ */ /* end of group LLWU_Register_Masks */
+
+
+/* LLWU - Peripheral instance base addresses */
+/** Peripheral LLWU base address */
+#define LLWU_BASE (0x4007C000u)
+/** Peripheral LLWU base pointer */
+#define LLWU ((LLWU_Type *)LLWU_BASE)
+
+/**
+ * @}
+ */ /* end of group LLWU_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- LPTMR Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup LPTMR_Peripheral_Access_Layer LPTMR Peripheral Access Layer
+ * @{
+ */
+
+/** LPTMR - Register Layout Typedef */
+typedef struct {
+ __IO uint32_t CSR; /**< Low Power Timer Control Status Register, offset: 0x0 */
+ __IO uint32_t PSR; /**< Low Power Timer Prescale Register, offset: 0x4 */
+ __IO uint32_t CMR; /**< Low Power Timer Compare Register, offset: 0x8 */
+ __I uint32_t CNR; /**< Low Power Timer Counter Register, offset: 0xC */
+} LPTMR_Type;
+
+/* ----------------------------------------------------------------------------
+ -- LPTMR Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup LPTMR_Register_Masks LPTMR Register Masks
+ * @{
+ */
+
+/* CSR Bit Fields */
+#define LPTMR_CSR_TEN_MASK 0x1u
+#define LPTMR_CSR_TEN_SHIFT 0
+#define LPTMR_CSR_TMS_MASK 0x2u
+#define LPTMR_CSR_TMS_SHIFT 1
+#define LPTMR_CSR_TFC_MASK 0x4u
+#define LPTMR_CSR_TFC_SHIFT 2
+#define LPTMR_CSR_TPP_MASK 0x8u
+#define LPTMR_CSR_TPP_SHIFT 3
+#define LPTMR_CSR_TPS_MASK 0x30u
+#define LPTMR_CSR_TPS_SHIFT 4
+#define LPTMR_CSR_TPS(x) (((uint32_t)(((uint32_t)(x))<<LPTMR_CSR_TPS_SHIFT))&LPTMR_CSR_TPS_MASK)
+#define LPTMR_CSR_TIE_MASK 0x40u
+#define LPTMR_CSR_TIE_SHIFT 6
+#define LPTMR_CSR_TCF_MASK 0x80u
+#define LPTMR_CSR_TCF_SHIFT 7
+/* PSR Bit Fields */
+#define LPTMR_PSR_PCS_MASK 0x3u
+#define LPTMR_PSR_PCS_SHIFT 0
+#define LPTMR_PSR_PCS(x) (((uint32_t)(((uint32_t)(x))<<LPTMR_PSR_PCS_SHIFT))&LPTMR_PSR_PCS_MASK)
+#define LPTMR_PSR_PBYP_MASK 0x4u
+#define LPTMR_PSR_PBYP_SHIFT 2
+#define LPTMR_PSR_PRESCALE_MASK 0x78u
+#define LPTMR_PSR_PRESCALE_SHIFT 3
+#define LPTMR_PSR_PRESCALE(x) (((uint32_t)(((uint32_t)(x))<<LPTMR_PSR_PRESCALE_SHIFT))&LPTMR_PSR_PRESCALE_MASK)
+/* CMR Bit Fields */
+#define LPTMR_CMR_COMPARE_MASK 0xFFFFu
+#define LPTMR_CMR_COMPARE_SHIFT 0
+#define LPTMR_CMR_COMPARE(x) (((uint32_t)(((uint32_t)(x))<<LPTMR_CMR_COMPARE_SHIFT))&LPTMR_CMR_COMPARE_MASK)
+/* CNR Bit Fields */
+#define LPTMR_CNR_COUNTER_MASK 0xFFFFu
+#define LPTMR_CNR_COUNTER_SHIFT 0
+#define LPTMR_CNR_COUNTER(x) (((uint32_t)(((uint32_t)(x))<<LPTMR_CNR_COUNTER_SHIFT))&LPTMR_CNR_COUNTER_MASK)
+
+/**
+ * @}
+ */ /* end of group LPTMR_Register_Masks */
+
+
+/* LPTMR - Peripheral instance base addresses */
+/** Peripheral LPTMR0 base address */
+#define LPTMR0_BASE (0x40040000u)
+/** Peripheral LPTMR0 base pointer */
+#define LPTMR0 ((LPTMR_Type *)LPTMR0_BASE)
+
+/**
+ * @}
+ */ /* end of group LPTMR_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- MCG Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup MCG_Peripheral_Access_Layer MCG Peripheral Access Layer
+ * @{
+ */
+
+/** MCG - Register Layout Typedef */
+typedef struct {
+ __IO uint8_t C1; /**< MCG Control 1 Register, offset: 0x0 */
+ __IO uint8_t C2; /**< MCG Control 2 Register, offset: 0x1 */
+ __IO uint8_t C3; /**< MCG Control 3 Register, offset: 0x2 */
+ __IO uint8_t C4; /**< MCG Control 4 Register, offset: 0x3 */
+ __IO uint8_t C5; /**< MCG Control 5 Register, offset: 0x4 */
+ __IO uint8_t C6; /**< MCG Control 6 Register, offset: 0x5 */
+ __I uint8_t S; /**< MCG Status Register, offset: 0x6 */
+ uint8_t RESERVED_0[1];
+ __IO uint8_t SC; /**< MCG Status and Control Register, offset: 0x8 */
+ uint8_t RESERVED_1[1];
+ __IO uint8_t ATCVH; /**< MCG Auto Trim Compare Value High Register, offset: 0xA */
+ __IO uint8_t ATCVL; /**< MCG Auto Trim Compare Value Low Register, offset: 0xB */
+ __IO uint8_t C7; /**< MCG Control 7 Register, offset: 0xC */
+ __IO uint8_t C8; /**< MCG Control 8 Register, offset: 0xD */
+} MCG_Type;
+
+/* ----------------------------------------------------------------------------
+ -- MCG Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup MCG_Register_Masks MCG Register Masks
+ * @{
+ */
+
+/* C1 Bit Fields */
+#define MCG_C1_IREFSTEN_MASK 0x1u
+#define MCG_C1_IREFSTEN_SHIFT 0
+#define MCG_C1_IRCLKEN_MASK 0x2u
+#define MCG_C1_IRCLKEN_SHIFT 1
+#define MCG_C1_IREFS_MASK 0x4u
+#define MCG_C1_IREFS_SHIFT 2
+#define MCG_C1_FRDIV_MASK 0x38u
+#define MCG_C1_FRDIV_SHIFT 3
+#define MCG_C1_FRDIV(x) (((uint8_t)(((uint8_t)(x))<<MCG_C1_FRDIV_SHIFT))&MCG_C1_FRDIV_MASK)
+#define MCG_C1_CLKS_MASK 0xC0u
+#define MCG_C1_CLKS_SHIFT 6
+#define MCG_C1_CLKS(x) (((uint8_t)(((uint8_t)(x))<<MCG_C1_CLKS_SHIFT))&MCG_C1_CLKS_MASK)
+/* C2 Bit Fields */
+#define MCG_C2_IRCS_MASK 0x1u
+#define MCG_C2_IRCS_SHIFT 0
+#define MCG_C2_LP_MASK 0x2u
+#define MCG_C2_LP_SHIFT 1
+#define MCG_C2_EREFS0_MASK 0x4u
+#define MCG_C2_EREFS0_SHIFT 2
+#define MCG_C2_HGO0_MASK 0x8u
+#define MCG_C2_HGO0_SHIFT 3
+#define MCG_C2_RANGE0_MASK 0x30u
+#define MCG_C2_RANGE0_SHIFT 4
+#define MCG_C2_RANGE0(x) (((uint8_t)(((uint8_t)(x))<<MCG_C2_RANGE0_SHIFT))&MCG_C2_RANGE0_MASK)
+#define MCG_C2_LOCRE0_MASK 0x80u
+#define MCG_C2_LOCRE0_SHIFT 7
+/* C3 Bit Fields */
+#define MCG_C3_SCTRIM_MASK 0xFFu
+#define MCG_C3_SCTRIM_SHIFT 0
+#define MCG_C3_SCTRIM(x) (((uint8_t)(((uint8_t)(x))<<MCG_C3_SCTRIM_SHIFT))&MCG_C3_SCTRIM_MASK)
+/* C4 Bit Fields */
+#define MCG_C4_SCFTRIM_MASK 0x1u
+#define MCG_C4_SCFTRIM_SHIFT 0
+#define MCG_C4_FCTRIM_MASK 0x1Eu
+#define MCG_C4_FCTRIM_SHIFT 1
+#define MCG_C4_FCTRIM(x) (((uint8_t)(((uint8_t)(x))<<MCG_C4_FCTRIM_SHIFT))&MCG_C4_FCTRIM_MASK)
+#define MCG_C4_DRST_DRS_MASK 0x60u
+#define MCG_C4_DRST_DRS_SHIFT 5
+#define MCG_C4_DRST_DRS(x) (((uint8_t)(((uint8_t)(x))<<MCG_C4_DRST_DRS_SHIFT))&MCG_C4_DRST_DRS_MASK)
+#define MCG_C4_DMX32_MASK 0x80u
+#define MCG_C4_DMX32_SHIFT 7
+/* C5 Bit Fields */
+#define MCG_C5_PRDIV0_MASK 0x1Fu
+#define MCG_C5_PRDIV0_SHIFT 0
+#define MCG_C5_PRDIV0(x) (((uint8_t)(((uint8_t)(x))<<MCG_C5_PRDIV0_SHIFT))&MCG_C5_PRDIV0_MASK)
+#define MCG_C5_PLLSTEN0_MASK 0x20u
+#define MCG_C5_PLLSTEN0_SHIFT 5
+#define MCG_C5_PLLCLKEN0_MASK 0x40u
+#define MCG_C5_PLLCLKEN0_SHIFT 6
+/* C6 Bit Fields */
+#define MCG_C6_VDIV0_MASK 0x1Fu
+#define MCG_C6_VDIV0_SHIFT 0
+#define MCG_C6_VDIV0(x) (((uint8_t)(((uint8_t)(x))<<MCG_C6_VDIV0_SHIFT))&MCG_C6_VDIV0_MASK)
+#define MCG_C6_CME0_MASK 0x20u
+#define MCG_C6_CME0_SHIFT 5
+#define MCG_C6_PLLS_MASK 0x40u
+#define MCG_C6_PLLS_SHIFT 6
+#define MCG_C6_LOLIE0_MASK 0x80u
+#define MCG_C6_LOLIE0_SHIFT 7
+/* S Bit Fields */
+#define MCG_S_IRCST_MASK 0x1u
+#define MCG_S_IRCST_SHIFT 0
+#define MCG_S_OSCINIT0_MASK 0x2u
+#define MCG_S_OSCINIT0_SHIFT 1
+#define MCG_S_CLKST_MASK 0xCu
+#define MCG_S_CLKST_SHIFT 2
+#define MCG_S_CLKST(x) (((uint8_t)(((uint8_t)(x))<<MCG_S_CLKST_SHIFT))&MCG_S_CLKST_MASK)
+#define MCG_S_IREFST_MASK 0x10u
+#define MCG_S_IREFST_SHIFT 4
+#define MCG_S_PLLST_MASK 0x20u
+#define MCG_S_PLLST_SHIFT 5
+#define MCG_S_LOCK0_MASK 0x40u
+#define MCG_S_LOCK0_SHIFT 6
+#define MCG_S_LOLS0_MASK 0x80u
+#define MCG_S_LOLS0_SHIFT 7
+/* SC Bit Fields */
+#define MCG_SC_LOCS0_MASK 0x1u
+#define MCG_SC_LOCS0_SHIFT 0
+#define MCG_SC_FCRDIV_MASK 0xEu
+#define MCG_SC_FCRDIV_SHIFT 1
+#define MCG_SC_FCRDIV(x) (((uint8_t)(((uint8_t)(x))<<MCG_SC_FCRDIV_SHIFT))&MCG_SC_FCRDIV_MASK)
+#define MCG_SC_FLTPRSRV_MASK 0x10u
+#define MCG_SC_FLTPRSRV_SHIFT 4
+#define MCG_SC_ATMF_MASK 0x20u
+#define MCG_SC_ATMF_SHIFT 5
+#define MCG_SC_ATMS_MASK 0x40u
+#define MCG_SC_ATMS_SHIFT 6
+#define MCG_SC_ATME_MASK 0x80u
+#define MCG_SC_ATME_SHIFT 7
+/* ATCVH Bit Fields */
+#define MCG_ATCVH_ATCVH_MASK 0xFFu
+#define MCG_ATCVH_ATCVH_SHIFT 0
+#define MCG_ATCVH_ATCVH(x) (((uint8_t)(((uint8_t)(x))<<MCG_ATCVH_ATCVH_SHIFT))&MCG_ATCVH_ATCVH_MASK)
+/* ATCVL Bit Fields */
+#define MCG_ATCVL_ATCVL_MASK 0xFFu
+#define MCG_ATCVL_ATCVL_SHIFT 0
+#define MCG_ATCVL_ATCVL(x) (((uint8_t)(((uint8_t)(x))<<MCG_ATCVL_ATCVL_SHIFT))&MCG_ATCVL_ATCVL_MASK)
+/* C7 Bit Fields */
+#define MCG_C7_OSCSEL_MASK 0x1u
+#define MCG_C7_OSCSEL_SHIFT 0
+/* C8 Bit Fields */
+#define MCG_C8_LOCS1_MASK 0x1u
+#define MCG_C8_LOCS1_SHIFT 0
+#define MCG_C8_CME1_MASK 0x20u
+#define MCG_C8_CME1_SHIFT 5
+#define MCG_C8_LOLRE_MASK 0x40u
+#define MCG_C8_LOLRE_SHIFT 6
+#define MCG_C8_LOCRE1_MASK 0x80u
+#define MCG_C8_LOCRE1_SHIFT 7
+
+/**
+ * @}
+ */ /* end of group MCG_Register_Masks */
+
+
+/* MCG - Peripheral instance base addresses */
+/** Peripheral MCG base address */
+#define MCG_BASE (0x40064000u)
+/** Peripheral MCG base pointer */
+#define MCG ((MCG_Type *)MCG_BASE)
+
+/**
+ * @}
+ */ /* end of group MCG_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- NV Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup NV_Peripheral_Access_Layer NV Peripheral Access Layer
+ * @{
+ */
+
+/** NV - Register Layout Typedef */
+typedef struct {
+ __I uint8_t BACKKEY3; /**< Backdoor Comparison Key 3., offset: 0x0 */
+ __I uint8_t BACKKEY2; /**< Backdoor Comparison Key 2., offset: 0x1 */
+ __I uint8_t BACKKEY1; /**< Backdoor Comparison Key 1., offset: 0x2 */
+ __I uint8_t BACKKEY0; /**< Backdoor Comparison Key 0., offset: 0x3 */
+ __I uint8_t BACKKEY7; /**< Backdoor Comparison Key 7., offset: 0x4 */
+ __I uint8_t BACKKEY6; /**< Backdoor Comparison Key 6., offset: 0x5 */
+ __I uint8_t BACKKEY5; /**< Backdoor Comparison Key 5., offset: 0x6 */
+ __I uint8_t BACKKEY4; /**< Backdoor Comparison Key 4., offset: 0x7 */
+ __I uint8_t FPROT3; /**< Non-volatile P-Flash Protection 1 - Low Register, offset: 0x8 */
+ __I uint8_t FPROT2; /**< Non-volatile P-Flash Protection 1 - High Register, offset: 0x9 */
+ __I uint8_t FPROT1; /**< Non-volatile P-Flash Protection 0 - Low Register, offset: 0xA */
+ __I uint8_t FPROT0; /**< Non-volatile P-Flash Protection 0 - High Register, offset: 0xB */
+ __I uint8_t FSEC; /**< Non-volatile Flash Security Register, offset: 0xC */
+ __I uint8_t FOPT; /**< Non-volatile Flash Option Register, offset: 0xD */
+ __I uint8_t FEPROT; /**< Non-volatile EERAM Protection Register, offset: 0xE */
+ __I uint8_t FDPROT; /**< Non-volatile D-Flash Protection Register, offset: 0xF */
+} NV_Type;
+
+/* ----------------------------------------------------------------------------
+ -- NV Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup NV_Register_Masks NV Register Masks
+ * @{
+ */
+
+/* BACKKEY3 Bit Fields */
+#define NV_BACKKEY3_KEY_MASK 0xFFu
+#define NV_BACKKEY3_KEY_SHIFT 0
+#define NV_BACKKEY3_KEY(x) (((uint8_t)(((uint8_t)(x))<<NV_BACKKEY3_KEY_SHIFT))&NV_BACKKEY3_KEY_MASK)
+/* BACKKEY2 Bit Fields */
+#define NV_BACKKEY2_KEY_MASK 0xFFu
+#define NV_BACKKEY2_KEY_SHIFT 0
+#define NV_BACKKEY2_KEY(x) (((uint8_t)(((uint8_t)(x))<<NV_BACKKEY2_KEY_SHIFT))&NV_BACKKEY2_KEY_MASK)
+/* BACKKEY1 Bit Fields */
+#define NV_BACKKEY1_KEY_MASK 0xFFu
+#define NV_BACKKEY1_KEY_SHIFT 0
+#define NV_BACKKEY1_KEY(x) (((uint8_t)(((uint8_t)(x))<<NV_BACKKEY1_KEY_SHIFT))&NV_BACKKEY1_KEY_MASK)
+/* BACKKEY0 Bit Fields */
+#define NV_BACKKEY0_KEY_MASK 0xFFu
+#define NV_BACKKEY0_KEY_SHIFT 0
+#define NV_BACKKEY0_KEY(x) (((uint8_t)(((uint8_t)(x))<<NV_BACKKEY0_KEY_SHIFT))&NV_BACKKEY0_KEY_MASK)
+/* BACKKEY7 Bit Fields */
+#define NV_BACKKEY7_KEY_MASK 0xFFu
+#define NV_BACKKEY7_KEY_SHIFT 0
+#define NV_BACKKEY7_KEY(x) (((uint8_t)(((uint8_t)(x))<<NV_BACKKEY7_KEY_SHIFT))&NV_BACKKEY7_KEY_MASK)
+/* BACKKEY6 Bit Fields */
+#define NV_BACKKEY6_KEY_MASK 0xFFu
+#define NV_BACKKEY6_KEY_SHIFT 0
+#define NV_BACKKEY6_KEY(x) (((uint8_t)(((uint8_t)(x))<<NV_BACKKEY6_KEY_SHIFT))&NV_BACKKEY6_KEY_MASK)
+/* BACKKEY5 Bit Fields */
+#define NV_BACKKEY5_KEY_MASK 0xFFu
+#define NV_BACKKEY5_KEY_SHIFT 0
+#define NV_BACKKEY5_KEY(x) (((uint8_t)(((uint8_t)(x))<<NV_BACKKEY5_KEY_SHIFT))&NV_BACKKEY5_KEY_MASK)
+/* BACKKEY4 Bit Fields */
+#define NV_BACKKEY4_KEY_MASK 0xFFu
+#define NV_BACKKEY4_KEY_SHIFT 0
+#define NV_BACKKEY4_KEY(x) (((uint8_t)(((uint8_t)(x))<<NV_BACKKEY4_KEY_SHIFT))&NV_BACKKEY4_KEY_MASK)
+/* FPROT3 Bit Fields */
+#define NV_FPROT3_PROT_MASK 0xFFu
+#define NV_FPROT3_PROT_SHIFT 0
+#define NV_FPROT3_PROT(x) (((uint8_t)(((uint8_t)(x))<<NV_FPROT3_PROT_SHIFT))&NV_FPROT3_PROT_MASK)
+/* FPROT2 Bit Fields */
+#define NV_FPROT2_PROT_MASK 0xFFu
+#define NV_FPROT2_PROT_SHIFT 0
+#define NV_FPROT2_PROT(x) (((uint8_t)(((uint8_t)(x))<<NV_FPROT2_PROT_SHIFT))&NV_FPROT2_PROT_MASK)
+/* FPROT1 Bit Fields */
+#define NV_FPROT1_PROT_MASK 0xFFu
+#define NV_FPROT1_PROT_SHIFT 0
+#define NV_FPROT1_PROT(x) (((uint8_t)(((uint8_t)(x))<<NV_FPROT1_PROT_SHIFT))&NV_FPROT1_PROT_MASK)
+/* FPROT0 Bit Fields */
+#define NV_FPROT0_PROT_MASK 0xFFu
+#define NV_FPROT0_PROT_SHIFT 0
+#define NV_FPROT0_PROT(x) (((uint8_t)(((uint8_t)(x))<<NV_FPROT0_PROT_SHIFT))&NV_FPROT0_PROT_MASK)
+/* FSEC Bit Fields */
+#define NV_FSEC_SEC_MASK 0x3u
+#define NV_FSEC_SEC_SHIFT 0
+#define NV_FSEC_SEC(x) (((uint8_t)(((uint8_t)(x))<<NV_FSEC_SEC_SHIFT))&NV_FSEC_SEC_MASK)
+#define NV_FSEC_FSLACC_MASK 0xCu
+#define NV_FSEC_FSLACC_SHIFT 2
+#define NV_FSEC_FSLACC(x) (((uint8_t)(((uint8_t)(x))<<NV_FSEC_FSLACC_SHIFT))&NV_FSEC_FSLACC_MASK)
+#define NV_FSEC_MEEN_MASK 0x30u
+#define NV_FSEC_MEEN_SHIFT 4
+#define NV_FSEC_MEEN(x) (((uint8_t)(((uint8_t)(x))<<NV_FSEC_MEEN_SHIFT))&NV_FSEC_MEEN_MASK)
+#define NV_FSEC_KEYEN_MASK 0xC0u
+#define NV_FSEC_KEYEN_SHIFT 6
+#define NV_FSEC_KEYEN(x) (((uint8_t)(((uint8_t)(x))<<NV_FSEC_KEYEN_SHIFT))&NV_FSEC_KEYEN_MASK)
+/* FOPT Bit Fields */
+#define NV_FOPT_LPBOOT_MASK 0x1u
+#define NV_FOPT_LPBOOT_SHIFT 0
+#define NV_FOPT_EZPORT_DIS_MASK 0x2u
+#define NV_FOPT_EZPORT_DIS_SHIFT 1
+/* FEPROT Bit Fields */
+#define NV_FEPROT_EPROT_MASK 0xFFu
+#define NV_FEPROT_EPROT_SHIFT 0
+#define NV_FEPROT_EPROT(x) (((uint8_t)(((uint8_t)(x))<<NV_FEPROT_EPROT_SHIFT))&NV_FEPROT_EPROT_MASK)
+/* FDPROT Bit Fields */
+#define NV_FDPROT_DPROT_MASK 0xFFu
+#define NV_FDPROT_DPROT_SHIFT 0
+#define NV_FDPROT_DPROT(x) (((uint8_t)(((uint8_t)(x))<<NV_FDPROT_DPROT_SHIFT))&NV_FDPROT_DPROT_MASK)
+
+/**
+ * @}
+ */ /* end of group NV_Register_Masks */
+
+
+/* NV - Peripheral instance base addresses */
+/** Peripheral FTFL_FlashConfig base address */
+#define FTFL_FlashConfig_BASE (0x400u)
+/** Peripheral FTFL_FlashConfig base pointer */
+#define FTFL_FlashConfig ((NV_Type *)FTFL_FlashConfig_BASE)
+
+/**
+ * @}
+ */ /* end of group NV_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- OSC Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup OSC_Peripheral_Access_Layer OSC Peripheral Access Layer
+ * @{
+ */
+
+/** OSC - Register Layout Typedef */
+typedef struct {
+ __IO uint8_t CR; /**< OSC Control Register, offset: 0x0 */
+} OSC_Type;
+
+/* ----------------------------------------------------------------------------
+ -- OSC Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup OSC_Register_Masks OSC Register Masks
+ * @{
+ */
+
+/* CR Bit Fields */
+#define OSC_CR_SC16P_MASK 0x1u
+#define OSC_CR_SC16P_SHIFT 0
+#define OSC_CR_SC8P_MASK 0x2u
+#define OSC_CR_SC8P_SHIFT 1
+#define OSC_CR_SC4P_MASK 0x4u
+#define OSC_CR_SC4P_SHIFT 2
+#define OSC_CR_SC2P_MASK 0x8u
+#define OSC_CR_SC2P_SHIFT 3
+#define OSC_CR_EREFSTEN_MASK 0x20u
+#define OSC_CR_EREFSTEN_SHIFT 5
+#define OSC_CR_ERCLKEN_MASK 0x80u
+#define OSC_CR_ERCLKEN_SHIFT 7
+
+/**
+ * @}
+ */ /* end of group OSC_Register_Masks */
+
+
+/* OSC - Peripheral instance base addresses */
+/** Peripheral OSC0 base address */
+#define OSC0_BASE (0x40065000u)
+/** Peripheral OSC0 base pointer */
+#define OSC0 ((OSC_Type *)OSC0_BASE)
+
+/**
+ * @}
+ */ /* end of group OSC_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- PDB Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup PDB_Peripheral_Access_Layer PDB Peripheral Access Layer
+ * @{
+ */
+
+/** PDB - Register Layout Typedef */
+typedef struct {
+ __IO uint32_t SC; /**< Status and Control Register, offset: 0x0 */
+ __IO uint32_t MOD; /**< Modulus Register, offset: 0x4 */
+ __I uint32_t CNT; /**< Counter Register, offset: 0x8 */
+ __IO uint32_t IDLY; /**< Interrupt Delay Register, offset: 0xC */
+ struct { /* offset: 0x10, array step: 0x10 */
+ __IO uint32_t C1; /**< Channel n Control Register 1, array offset: 0x10, array step: 0x10 */
+ __IO uint32_t S; /**< Channel n Status Register, array offset: 0x14, array step: 0x10 */
+ __IO uint32_t DLY[2]; /**< Channel n Delay 0 Register..Channel n Delay 1 Register, array offset: 0x18, array step: index*0x10, index2*0x4 */
+ } CH[1];
+ uint8_t RESERVED_0[368];
+ __IO uint32_t POEN; /**< Pulse-Out n Enable Register, offset: 0x190 */
+ __IO uint32_t PODLY[2]; /**< Pulse-Out n Delay Register, array offset: 0x194, array step: 0x4 */
+} PDB_Type;
+
+/* ----------------------------------------------------------------------------
+ -- PDB Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup PDB_Register_Masks PDB Register Masks
+ * @{
+ */
+
+/* SC Bit Fields */
+#define PDB_SC_LDOK_MASK 0x1u
+#define PDB_SC_LDOK_SHIFT 0
+#define PDB_SC_CONT_MASK 0x2u
+#define PDB_SC_CONT_SHIFT 1
+#define PDB_SC_MULT_MASK 0xCu
+#define PDB_SC_MULT_SHIFT 2
+#define PDB_SC_MULT(x) (((uint32_t)(((uint32_t)(x))<<PDB_SC_MULT_SHIFT))&PDB_SC_MULT_MASK)
+#define PDB_SC_PDBIE_MASK 0x20u
+#define PDB_SC_PDBIE_SHIFT 5
+#define PDB_SC_PDBIF_MASK 0x40u
+#define PDB_SC_PDBIF_SHIFT 6
+#define PDB_SC_PDBEN_MASK 0x80u
+#define PDB_SC_PDBEN_SHIFT 7
+#define PDB_SC_TRGSEL_MASK 0xF00u
+#define PDB_SC_TRGSEL_SHIFT 8
+#define PDB_SC_TRGSEL(x) (((uint32_t)(((uint32_t)(x))<<PDB_SC_TRGSEL_SHIFT))&PDB_SC_TRGSEL_MASK)
+#define PDB_SC_PRESCALER_MASK 0x7000u
+#define PDB_SC_PRESCALER_SHIFT 12
+#define PDB_SC_PRESCALER(x) (((uint32_t)(((uint32_t)(x))<<PDB_SC_PRESCALER_SHIFT))&PDB_SC_PRESCALER_MASK)
+#define PDB_SC_DMAEN_MASK 0x8000u
+#define PDB_SC_DMAEN_SHIFT 15
+#define PDB_SC_SWTRIG_MASK 0x10000u
+#define PDB_SC_SWTRIG_SHIFT 16
+#define PDB_SC_PDBEIE_MASK 0x20000u
+#define PDB_SC_PDBEIE_SHIFT 17
+#define PDB_SC_LDMOD_MASK 0xC0000u
+#define PDB_SC_LDMOD_SHIFT 18
+#define PDB_SC_LDMOD(x) (((uint32_t)(((uint32_t)(x))<<PDB_SC_LDMOD_SHIFT))&PDB_SC_LDMOD_MASK)
+/* MOD Bit Fields */
+#define PDB_MOD_MOD_MASK 0xFFFFu
+#define PDB_MOD_MOD_SHIFT 0
+#define PDB_MOD_MOD(x) (((uint32_t)(((uint32_t)(x))<<PDB_MOD_MOD_SHIFT))&PDB_MOD_MOD_MASK)
+/* CNT Bit Fields */
+#define PDB_CNT_CNT_MASK 0xFFFFu
+#define PDB_CNT_CNT_SHIFT 0
+#define PDB_CNT_CNT(x) (((uint32_t)(((uint32_t)(x))<<PDB_CNT_CNT_SHIFT))&PDB_CNT_CNT_MASK)
+/* IDLY Bit Fields */
+#define PDB_IDLY_IDLY_MASK 0xFFFFu
+#define PDB_IDLY_IDLY_SHIFT 0
+#define PDB_IDLY_IDLY(x) (((uint32_t)(((uint32_t)(x))<<PDB_IDLY_IDLY_SHIFT))&PDB_IDLY_IDLY_MASK)
+/* C1 Bit Fields */
+#define PDB_C1_EN_MASK 0xFFu
+#define PDB_C1_EN_SHIFT 0
+#define PDB_C1_EN(x) (((uint32_t)(((uint32_t)(x))<<PDB_C1_EN_SHIFT))&PDB_C1_EN_MASK)
+#define PDB_C1_TOS_MASK 0xFF00u
+#define PDB_C1_TOS_SHIFT 8
+#define PDB_C1_TOS(x) (((uint32_t)(((uint32_t)(x))<<PDB_C1_TOS_SHIFT))&PDB_C1_TOS_MASK)
+#define PDB_C1_BB_MASK 0xFF0000u
+#define PDB_C1_BB_SHIFT 16
+#define PDB_C1_BB(x) (((uint32_t)(((uint32_t)(x))<<PDB_C1_BB_SHIFT))&PDB_C1_BB_MASK)
+/* S Bit Fields */
+#define PDB_S_ERR_MASK 0xFFu
+#define PDB_S_ERR_SHIFT 0
+#define PDB_S_ERR(x) (((uint32_t)(((uint32_t)(x))<<PDB_S_ERR_SHIFT))&PDB_S_ERR_MASK)
+#define PDB_S_CF_MASK 0xFF0000u
+#define PDB_S_CF_SHIFT 16
+#define PDB_S_CF(x) (((uint32_t)(((uint32_t)(x))<<PDB_S_CF_SHIFT))&PDB_S_CF_MASK)
+/* DLY Bit Fields */
+#define PDB_DLY_DLY_MASK 0xFFFFu
+#define PDB_DLY_DLY_SHIFT 0
+#define PDB_DLY_DLY(x) (((uint32_t)(((uint32_t)(x))<<PDB_DLY_DLY_SHIFT))&PDB_DLY_DLY_MASK)
+/* POEN Bit Fields */
+#define PDB_POEN_POEN_MASK 0xFFu
+#define PDB_POEN_POEN_SHIFT 0
+#define PDB_POEN_POEN(x) (((uint32_t)(((uint32_t)(x))<<PDB_POEN_POEN_SHIFT))&PDB_POEN_POEN_MASK)
+/* PODLY Bit Fields */
+#define PDB_PODLY_DLY2_MASK 0xFFFFu
+#define PDB_PODLY_DLY2_SHIFT 0
+#define PDB_PODLY_DLY2(x) (((uint32_t)(((uint32_t)(x))<<PDB_PODLY_DLY2_SHIFT))&PDB_PODLY_DLY2_MASK)
+#define PDB_PODLY_DLY1_MASK 0xFFFF0000u
+#define PDB_PODLY_DLY1_SHIFT 16
+#define PDB_PODLY_DLY1(x) (((uint32_t)(((uint32_t)(x))<<PDB_PODLY_DLY1_SHIFT))&PDB_PODLY_DLY1_MASK)
+
+/**
+ * @}
+ */ /* end of group PDB_Register_Masks */
+
+
+/* PDB - Peripheral instance base addresses */
+/** Peripheral PDB0 base address */
+#define PDB0_BASE (0x40036000u)
+/** Peripheral PDB0 base pointer */
+#define PDB0 ((PDB_Type *)PDB0_BASE)
+
+/**
+ * @}
+ */ /* end of group PDB_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- PIT Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup PIT_Peripheral_Access_Layer PIT Peripheral Access Layer
+ * @{
+ */
+
+/** PIT - Register Layout Typedef */
+typedef struct {
+ __IO uint32_t MCR; /**< PIT Module Control Register, offset: 0x0 */
+ uint8_t RESERVED_0[252];
+ struct { /* offset: 0x100, array step: 0x10 */
+ __IO uint32_t LDVAL; /**< Timer Load Value Register, array offset: 0x100, array step: 0x10 */
+ __I uint32_t CVAL; /**< Current Timer Value Register, array offset: 0x104, array step: 0x10 */
+ __IO uint32_t TCTRL; /**< Timer Control Register, array offset: 0x108, array step: 0x10 */
+ __IO uint32_t TFLG; /**< Timer Flag Register, array offset: 0x10C, array step: 0x10 */
+ } CHANNEL[4];
+} PIT_Type;
+
+/* ----------------------------------------------------------------------------
+ -- PIT Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup PIT_Register_Masks PIT Register Masks
+ * @{
+ */
+
+/* MCR Bit Fields */
+#define PIT_MCR_FRZ_MASK 0x1u
+#define PIT_MCR_FRZ_SHIFT 0
+#define PIT_MCR_MDIS_MASK 0x2u
+#define PIT_MCR_MDIS_SHIFT 1
+/* LDVAL Bit Fields */
+#define PIT_LDVAL_TSV_MASK 0xFFFFFFFFu
+#define PIT_LDVAL_TSV_SHIFT 0
+#define PIT_LDVAL_TSV(x) (((uint32_t)(((uint32_t)(x))<<PIT_LDVAL_TSV_SHIFT))&PIT_LDVAL_TSV_MASK)
+/* CVAL Bit Fields */
+#define PIT_CVAL_TVL_MASK 0xFFFFFFFFu
+#define PIT_CVAL_TVL_SHIFT 0
+#define PIT_CVAL_TVL(x) (((uint32_t)(((uint32_t)(x))<<PIT_CVAL_TVL_SHIFT))&PIT_CVAL_TVL_MASK)
+/* TCTRL Bit Fields */
+#define PIT_TCTRL_TEN_MASK 0x1u
+#define PIT_TCTRL_TEN_SHIFT 0
+#define PIT_TCTRL_TIE_MASK 0x2u
+#define PIT_TCTRL_TIE_SHIFT 1
+/* TFLG Bit Fields */
+#define PIT_TFLG_TIF_MASK 0x1u
+#define PIT_TFLG_TIF_SHIFT 0
+
+/**
+ * @}
+ */ /* end of group PIT_Register_Masks */
+
+
+/* PIT - Peripheral instance base addresses */
+/** Peripheral PIT base address */
+#define PIT_BASE (0x40037000u)
+/** Peripheral PIT base pointer */
+#define PIT ((PIT_Type *)PIT_BASE)
+
+/**
+ * @}
+ */ /* end of group PIT_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- PMC Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup PMC_Peripheral_Access_Layer PMC Peripheral Access Layer
+ * @{
+ */
+
+/** PMC - Register Layout Typedef */
+typedef struct {
+ __IO uint8_t LVDSC1; /**< Low Voltage Detect Status and Control 1 Register, offset: 0x0 */
+ __IO uint8_t LVDSC2; /**< Low Voltage Detect Status and Control 2 Register, offset: 0x1 */
+ __IO uint8_t REGSC; /**< Regulator Status and Control Register, offset: 0x2 */
+} PMC_Type;
+
+/* ----------------------------------------------------------------------------
+ -- PMC Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup PMC_Register_Masks PMC Register Masks
+ * @{
+ */
+
+/* LVDSC1 Bit Fields */
+#define PMC_LVDSC1_LVDV_MASK 0x3u
+#define PMC_LVDSC1_LVDV_SHIFT 0
+#define PMC_LVDSC1_LVDV(x) (((uint8_t)(((uint8_t)(x))<<PMC_LVDSC1_LVDV_SHIFT))&PMC_LVDSC1_LVDV_MASK)
+#define PMC_LVDSC1_LVDRE_MASK 0x10u
+#define PMC_LVDSC1_LVDRE_SHIFT 4
+#define PMC_LVDSC1_LVDIE_MASK 0x20u
+#define PMC_LVDSC1_LVDIE_SHIFT 5
+#define PMC_LVDSC1_LVDACK_MASK 0x40u
+#define PMC_LVDSC1_LVDACK_SHIFT 6
+#define PMC_LVDSC1_LVDF_MASK 0x80u
+#define PMC_LVDSC1_LVDF_SHIFT 7
+/* LVDSC2 Bit Fields */
+#define PMC_LVDSC2_LVWV_MASK 0x3u
+#define PMC_LVDSC2_LVWV_SHIFT 0
+#define PMC_LVDSC2_LVWV(x) (((uint8_t)(((uint8_t)(x))<<PMC_LVDSC2_LVWV_SHIFT))&PMC_LVDSC2_LVWV_MASK)
+#define PMC_LVDSC2_LVWIE_MASK 0x20u
+#define PMC_LVDSC2_LVWIE_SHIFT 5
+#define PMC_LVDSC2_LVWACK_MASK 0x40u
+#define PMC_LVDSC2_LVWACK_SHIFT 6
+#define PMC_LVDSC2_LVWF_MASK 0x80u
+#define PMC_LVDSC2_LVWF_SHIFT 7
+/* REGSC Bit Fields */
+#define PMC_REGSC_BGBE_MASK 0x1u
+#define PMC_REGSC_BGBE_SHIFT 0
+#define PMC_REGSC_REGONS_MASK 0x4u
+#define PMC_REGSC_REGONS_SHIFT 2
+#define PMC_REGSC_ACKISO_MASK 0x8u
+#define PMC_REGSC_ACKISO_SHIFT 3
+
+/**
+ * @}
+ */ /* end of group PMC_Register_Masks */
+
+
+/* PMC - Peripheral instance base addresses */
+/** Peripheral PMC base address */
+#define PMC_BASE (0x4007D000u)
+/** Peripheral PMC base pointer */
+#define PMC ((PMC_Type *)PMC_BASE)
+
+/**
+ * @}
+ */ /* end of group PMC_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- PORT Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup PORT_Peripheral_Access_Layer PORT Peripheral Access Layer
+ * @{
+ */
+
+/** PORT - Register Layout Typedef */
+typedef struct {
+ __IO uint32_t PCR[32]; /**< Pin Control Register n, array offset: 0x0, array step: 0x4 */
+ __O uint32_t GPCLR; /**< Global Pin Control Low Register, offset: 0x80 */
+ __O uint32_t GPCHR; /**< Global Pin Control High Register, offset: 0x84 */
+ uint8_t RESERVED_0[24];
+ __IO uint32_t ISFR; /**< Interrupt Status Flag Register, offset: 0xA0 */
+ uint8_t RESERVED_1[28];
+ __IO uint32_t DFER; /**< Digital Filter Enable Register, offset: 0xC0 */
+ __IO uint32_t DFCR; /**< Digital Filter Clock Register, offset: 0xC4 */
+ __IO uint32_t DFWR; /**< Digital Filter Width Register, offset: 0xC8 */
+} PORT_Type;
+
+/* ----------------------------------------------------------------------------
+ -- PORT Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup PORT_Register_Masks PORT Register Masks
+ * @{
+ */
+
+/* PCR Bit Fields */
+#define PORT_PCR_PS_MASK 0x1u
+#define PORT_PCR_PS_SHIFT 0
+#define PORT_PCR_PE_MASK 0x2u
+#define PORT_PCR_PE_SHIFT 1
+#define PORT_PCR_SRE_MASK 0x4u
+#define PORT_PCR_SRE_SHIFT 2
+#define PORT_PCR_PFE_MASK 0x10u
+#define PORT_PCR_PFE_SHIFT 4
+#define PORT_PCR_ODE_MASK 0x20u
+#define PORT_PCR_ODE_SHIFT 5
+#define PORT_PCR_DSE_MASK 0x40u
+#define PORT_PCR_DSE_SHIFT 6
+#define PORT_PCR_MUX_MASK 0x700u
+#define PORT_PCR_MUX_SHIFT 8
+#define PORT_PCR_MUX(x) (((uint32_t)(((uint32_t)(x))<<PORT_PCR_MUX_SHIFT))&PORT_PCR_MUX_MASK)
+#define PORT_PCR_LK_MASK 0x8000u
+#define PORT_PCR_LK_SHIFT 15
+#define PORT_PCR_IRQC_MASK 0xF0000u
+#define PORT_PCR_IRQC_SHIFT 16
+#define PORT_PCR_IRQC(x) (((uint32_t)(((uint32_t)(x))<<PORT_PCR_IRQC_SHIFT))&PORT_PCR_IRQC_MASK)
+#define PORT_PCR_ISF_MASK 0x1000000u
+#define PORT_PCR_ISF_SHIFT 24
+/* GPCLR Bit Fields */
+#define PORT_GPCLR_GPWD_MASK 0xFFFFu
+#define PORT_GPCLR_GPWD_SHIFT 0
+#define PORT_GPCLR_GPWD(x) (((uint32_t)(((uint32_t)(x))<<PORT_GPCLR_GPWD_SHIFT))&PORT_GPCLR_GPWD_MASK)
+#define PORT_GPCLR_GPWE_MASK 0xFFFF0000u
+#define PORT_GPCLR_GPWE_SHIFT 16
+#define PORT_GPCLR_GPWE(x) (((uint32_t)(((uint32_t)(x))<<PORT_GPCLR_GPWE_SHIFT))&PORT_GPCLR_GPWE_MASK)
+/* GPCHR Bit Fields */
+#define PORT_GPCHR_GPWD_MASK 0xFFFFu
+#define PORT_GPCHR_GPWD_SHIFT 0
+#define PORT_GPCHR_GPWD(x) (((uint32_t)(((uint32_t)(x))<<PORT_GPCHR_GPWD_SHIFT))&PORT_GPCHR_GPWD_MASK)
+#define PORT_GPCHR_GPWE_MASK 0xFFFF0000u
+#define PORT_GPCHR_GPWE_SHIFT 16
+#define PORT_GPCHR_GPWE(x) (((uint32_t)(((uint32_t)(x))<<PORT_GPCHR_GPWE_SHIFT))&PORT_GPCHR_GPWE_MASK)
+/* ISFR Bit Fields */
+#define PORT_ISFR_ISF_MASK 0xFFFFFFFFu
+#define PORT_ISFR_ISF_SHIFT 0
+#define PORT_ISFR_ISF(x) (((uint32_t)(((uint32_t)(x))<<PORT_ISFR_ISF_SHIFT))&PORT_ISFR_ISF_MASK)
+/* DFER Bit Fields */
+#define PORT_DFER_DFE_MASK 0xFFFFFFFFu
+#define PORT_DFER_DFE_SHIFT 0
+#define PORT_DFER_DFE(x) (((uint32_t)(((uint32_t)(x))<<PORT_DFER_DFE_SHIFT))&PORT_DFER_DFE_MASK)
+/* DFCR Bit Fields */
+#define PORT_DFCR_CS_MASK 0x1u
+#define PORT_DFCR_CS_SHIFT 0
+/* DFWR Bit Fields */
+#define PORT_DFWR_FILT_MASK 0x1Fu
+#define PORT_DFWR_FILT_SHIFT 0
+#define PORT_DFWR_FILT(x) (((uint32_t)(((uint32_t)(x))<<PORT_DFWR_FILT_SHIFT))&PORT_DFWR_FILT_MASK)
+
+/**
+ * @}
+ */ /* end of group PORT_Register_Masks */
+
+
+/* PORT - Peripheral instance base addresses */
+/** Peripheral PORTA base address */
+#define PORTA_BASE (0x40049000u)
+/** Peripheral PORTA base pointer */
+#define PORTA ((PORT_Type *)PORTA_BASE)
+/** Peripheral PORTB base address */
+#define PORTB_BASE (0x4004A000u)
+/** Peripheral PORTB base pointer */
+#define PORTB ((PORT_Type *)PORTB_BASE)
+/** Peripheral PORTC base address */
+#define PORTC_BASE (0x4004B000u)
+/** Peripheral PORTC base pointer */
+#define PORTC ((PORT_Type *)PORTC_BASE)
+/** Peripheral PORTD base address */
+#define PORTD_BASE (0x4004C000u)
+/** Peripheral PORTD base pointer */
+#define PORTD ((PORT_Type *)PORTD_BASE)
+/** Peripheral PORTE base address */
+#define PORTE_BASE (0x4004D000u)
+/** Peripheral PORTE base pointer */
+#define PORTE ((PORT_Type *)PORTE_BASE)
+
+/**
+ * @}
+ */ /* end of group PORT_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- RCM Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup RCM_Peripheral_Access_Layer RCM Peripheral Access Layer
+ * @{
+ */
+
+/** RCM - Register Layout Typedef */
+typedef struct {
+ __I uint8_t SRS0; /**< System Reset Status Register 0, offset: 0x0 */
+ __I uint8_t SRS1; /**< System Reset Status Register 1, offset: 0x1 */
+ uint8_t RESERVED_0[2];
+ __IO uint8_t RPFC; /**< Reset Pin Filter Control Register, offset: 0x4 */
+ __IO uint8_t RPFW; /**< Reset Pin Filter Width Register, offset: 0x5 */
+ uint8_t RESERVED_1[1];
+ __I uint8_t MR; /**< Mode Register, offset: 0x7 */
+} RCM_Type;
+
+/* ----------------------------------------------------------------------------
+ -- RCM Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup RCM_Register_Masks RCM Register Masks
+ * @{
+ */
+
+/* SRS0 Bit Fields */
+#define RCM_SRS0_WAKEUP_MASK 0x1u
+#define RCM_SRS0_WAKEUP_SHIFT 0
+#define RCM_SRS0_LVD_MASK 0x2u
+#define RCM_SRS0_LVD_SHIFT 1
+#define RCM_SRS0_LOC_MASK 0x4u
+#define RCM_SRS0_LOC_SHIFT 2
+#define RCM_SRS0_LOL_MASK 0x8u
+#define RCM_SRS0_LOL_SHIFT 3
+#define RCM_SRS0_WDOG_MASK 0x20u
+#define RCM_SRS0_WDOG_SHIFT 5
+#define RCM_SRS0_PIN_MASK 0x40u
+#define RCM_SRS0_PIN_SHIFT 6
+#define RCM_SRS0_POR_MASK 0x80u
+#define RCM_SRS0_POR_SHIFT 7
+/* SRS1 Bit Fields */
+#define RCM_SRS1_JTAG_MASK 0x1u
+#define RCM_SRS1_JTAG_SHIFT 0
+#define RCM_SRS1_LOCKUP_MASK 0x2u
+#define RCM_SRS1_LOCKUP_SHIFT 1
+#define RCM_SRS1_SW_MASK 0x4u
+#define RCM_SRS1_SW_SHIFT 2
+#define RCM_SRS1_MDM_AP_MASK 0x8u
+#define RCM_SRS1_MDM_AP_SHIFT 3
+#define RCM_SRS1_EZPT_MASK 0x10u
+#define RCM_SRS1_EZPT_SHIFT 4
+#define RCM_SRS1_SACKERR_MASK 0x20u
+#define RCM_SRS1_SACKERR_SHIFT 5
+/* RPFC Bit Fields */
+#define RCM_RPFC_RSTFLTSRW_MASK 0x3u
+#define RCM_RPFC_RSTFLTSRW_SHIFT 0
+#define RCM_RPFC_RSTFLTSRW(x) (((uint8_t)(((uint8_t)(x))<<RCM_RPFC_RSTFLTSRW_SHIFT))&RCM_RPFC_RSTFLTSRW_MASK)
+#define RCM_RPFC_RSTFLTSS_MASK 0x4u
+#define RCM_RPFC_RSTFLTSS_SHIFT 2
+/* RPFW Bit Fields */
+#define RCM_RPFW_RSTFLTSEL_MASK 0x1Fu
+#define RCM_RPFW_RSTFLTSEL_SHIFT 0
+#define RCM_RPFW_RSTFLTSEL(x) (((uint8_t)(((uint8_t)(x))<<RCM_RPFW_RSTFLTSEL_SHIFT))&RCM_RPFW_RSTFLTSEL_MASK)
+/* MR Bit Fields */
+#define RCM_MR_EZP_MS_MASK 0x2u
+#define RCM_MR_EZP_MS_SHIFT 1
+
+/**
+ * @}
+ */ /* end of group RCM_Register_Masks */
+
+
+/* RCM - Peripheral instance base addresses */
+/** Peripheral RCM base address */
+#define RCM_BASE (0x4007F000u)
+/** Peripheral RCM base pointer */
+#define RCM ((RCM_Type *)RCM_BASE)
+
+/**
+ * @}
+ */ /* end of group RCM_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- RFSYS Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup RFSYS_Peripheral_Access_Layer RFSYS Peripheral Access Layer
+ * @{
+ */
+
+/** RFSYS - Register Layout Typedef */
+typedef struct {
+ __IO uint32_t REG[8]; /**< Register file register, array offset: 0x0, array step: 0x4 */
+} RFSYS_Type;
+
+/* ----------------------------------------------------------------------------
+ -- RFSYS Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup RFSYS_Register_Masks RFSYS Register Masks
+ * @{
+ */
+
+/* REG Bit Fields */
+#define RFSYS_REG_LL_MASK 0xFFu
+#define RFSYS_REG_LL_SHIFT 0
+#define RFSYS_REG_LL(x) (((uint32_t)(((uint32_t)(x))<<RFSYS_REG_LL_SHIFT))&RFSYS_REG_LL_MASK)
+#define RFSYS_REG_LH_MASK 0xFF00u
+#define RFSYS_REG_LH_SHIFT 8
+#define RFSYS_REG_LH(x) (((uint32_t)(((uint32_t)(x))<<RFSYS_REG_LH_SHIFT))&RFSYS_REG_LH_MASK)
+#define RFSYS_REG_HL_MASK 0xFF0000u
+#define RFSYS_REG_HL_SHIFT 16
+#define RFSYS_REG_HL(x) (((uint32_t)(((uint32_t)(x))<<RFSYS_REG_HL_SHIFT))&RFSYS_REG_HL_MASK)
+#define RFSYS_REG_HH_MASK 0xFF000000u
+#define RFSYS_REG_HH_SHIFT 24
+#define RFSYS_REG_HH(x) (((uint32_t)(((uint32_t)(x))<<RFSYS_REG_HH_SHIFT))&RFSYS_REG_HH_MASK)
+
+/**
+ * @}
+ */ /* end of group RFSYS_Register_Masks */
+
+
+/* RFSYS - Peripheral instance base addresses */
+/** Peripheral RFSYS base address */
+#define RFSYS_BASE (0x40041000u)
+/** Peripheral RFSYS base pointer */
+#define RFSYS ((RFSYS_Type *)RFSYS_BASE)
+
+/**
+ * @}
+ */ /* end of group RFSYS_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- RFVBAT Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup RFVBAT_Peripheral_Access_Layer RFVBAT Peripheral Access Layer
+ * @{
+ */
+
+/** RFVBAT - Register Layout Typedef */
+typedef struct {
+ __IO uint32_t REG[8]; /**< VBAT register file register, array offset: 0x0, array step: 0x4 */
+} RFVBAT_Type;
+
+/* ----------------------------------------------------------------------------
+ -- RFVBAT Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup RFVBAT_Register_Masks RFVBAT Register Masks
+ * @{
+ */
+
+/* REG Bit Fields */
+#define RFVBAT_REG_LL_MASK 0xFFu
+#define RFVBAT_REG_LL_SHIFT 0
+#define RFVBAT_REG_LL(x) (((uint32_t)(((uint32_t)(x))<<RFVBAT_REG_LL_SHIFT))&RFVBAT_REG_LL_MASK)
+#define RFVBAT_REG_LH_MASK 0xFF00u
+#define RFVBAT_REG_LH_SHIFT 8
+#define RFVBAT_REG_LH(x) (((uint32_t)(((uint32_t)(x))<<RFVBAT_REG_LH_SHIFT))&RFVBAT_REG_LH_MASK)
+#define RFVBAT_REG_HL_MASK 0xFF0000u
+#define RFVBAT_REG_HL_SHIFT 16
+#define RFVBAT_REG_HL(x) (((uint32_t)(((uint32_t)(x))<<RFVBAT_REG_HL_SHIFT))&RFVBAT_REG_HL_MASK)
+#define RFVBAT_REG_HH_MASK 0xFF000000u
+#define RFVBAT_REG_HH_SHIFT 24
+#define RFVBAT_REG_HH(x) (((uint32_t)(((uint32_t)(x))<<RFVBAT_REG_HH_SHIFT))&RFVBAT_REG_HH_MASK)
+
+/**
+ * @}
+ */ /* end of group RFVBAT_Register_Masks */
+
+
+/* RFVBAT - Peripheral instance base addresses */
+/** Peripheral RFVBAT base address */
+#define RFVBAT_BASE (0x4003E000u)
+/** Peripheral RFVBAT base pointer */
+#define RFVBAT ((RFVBAT_Type *)RFVBAT_BASE)
+
+/**
+ * @}
+ */ /* end of group RFVBAT_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- RTC Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup RTC_Peripheral_Access_Layer RTC Peripheral Access Layer
+ * @{
+ */
+
+/** RTC - Register Layout Typedef */
+typedef struct {
+ __IO uint32_t TSR; /**< RTC Time Seconds Register, offset: 0x0 */
+ __IO uint32_t TPR; /**< RTC Time Prescaler Register, offset: 0x4 */
+ __IO uint32_t TAR; /**< RTC Time Alarm Register, offset: 0x8 */
+ __IO uint32_t TCR; /**< RTC Time Compensation Register, offset: 0xC */
+ __IO uint32_t CR; /**< RTC Control Register, offset: 0x10 */
+ __IO uint32_t SR; /**< RTC Status Register, offset: 0x14 */
+ __IO uint32_t LR; /**< RTC Lock Register, offset: 0x18 */
+ __IO uint32_t IER; /**< RTC Interrupt Enable Register, offset: 0x1C */
+ uint8_t RESERVED_0[2016];
+ __IO uint32_t WAR; /**< RTC Write Access Register, offset: 0x800 */
+ __IO uint32_t RAR; /**< RTC Read Access Register, offset: 0x804 */
+} RTC_Type;
+
+/* ----------------------------------------------------------------------------
+ -- RTC Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup RTC_Register_Masks RTC Register Masks
+ * @{
+ */
+
+/* TSR Bit Fields */
+#define RTC_TSR_TSR_MASK 0xFFFFFFFFu
+#define RTC_TSR_TSR_SHIFT 0
+#define RTC_TSR_TSR(x) (((uint32_t)(((uint32_t)(x))<<RTC_TSR_TSR_SHIFT))&RTC_TSR_TSR_MASK)
+/* TPR Bit Fields */
+#define RTC_TPR_TPR_MASK 0xFFFFu
+#define RTC_TPR_TPR_SHIFT 0
+#define RTC_TPR_TPR(x) (((uint32_t)(((uint32_t)(x))<<RTC_TPR_TPR_SHIFT))&RTC_TPR_TPR_MASK)
+/* TAR Bit Fields */
+#define RTC_TAR_TAR_MASK 0xFFFFFFFFu
+#define RTC_TAR_TAR_SHIFT 0
+#define RTC_TAR_TAR(x) (((uint32_t)(((uint32_t)(x))<<RTC_TAR_TAR_SHIFT))&RTC_TAR_TAR_MASK)
+/* TCR Bit Fields */
+#define RTC_TCR_TCR_MASK 0xFFu
+#define RTC_TCR_TCR_SHIFT 0
+#define RTC_TCR_TCR(x) (((uint32_t)(((uint32_t)(x))<<RTC_TCR_TCR_SHIFT))&RTC_TCR_TCR_MASK)
+#define RTC_TCR_CIR_MASK 0xFF00u
+#define RTC_TCR_CIR_SHIFT 8
+#define RTC_TCR_CIR(x) (((uint32_t)(((uint32_t)(x))<<RTC_TCR_CIR_SHIFT))&RTC_TCR_CIR_MASK)
+#define RTC_TCR_TCV_MASK 0xFF0000u
+#define RTC_TCR_TCV_SHIFT 16
+#define RTC_TCR_TCV(x) (((uint32_t)(((uint32_t)(x))<<RTC_TCR_TCV_SHIFT))&RTC_TCR_TCV_MASK)
+#define RTC_TCR_CIC_MASK 0xFF000000u
+#define RTC_TCR_CIC_SHIFT 24
+#define RTC_TCR_CIC(x) (((uint32_t)(((uint32_t)(x))<<RTC_TCR_CIC_SHIFT))&RTC_TCR_CIC_MASK)
+/* CR Bit Fields */
+#define RTC_CR_SWR_MASK 0x1u
+#define RTC_CR_SWR_SHIFT 0
+#define RTC_CR_WPE_MASK 0x2u
+#define RTC_CR_WPE_SHIFT 1
+#define RTC_CR_SUP_MASK 0x4u
+#define RTC_CR_SUP_SHIFT 2
+#define RTC_CR_UM_MASK 0x8u
+#define RTC_CR_UM_SHIFT 3
+#define RTC_CR_OSCE_MASK 0x100u
+#define RTC_CR_OSCE_SHIFT 8
+#define RTC_CR_CLKO_MASK 0x200u
+#define RTC_CR_CLKO_SHIFT 9
+#define RTC_CR_SC16P_MASK 0x400u
+#define RTC_CR_SC16P_SHIFT 10
+#define RTC_CR_SC8P_MASK 0x800u
+#define RTC_CR_SC8P_SHIFT 11
+#define RTC_CR_SC4P_MASK 0x1000u
+#define RTC_CR_SC4P_SHIFT 12
+#define RTC_CR_SC2P_MASK 0x2000u
+#define RTC_CR_SC2P_SHIFT 13
+/* SR Bit Fields */
+#define RTC_SR_TIF_MASK 0x1u
+#define RTC_SR_TIF_SHIFT 0
+#define RTC_SR_TOF_MASK 0x2u
+#define RTC_SR_TOF_SHIFT 1
+#define RTC_SR_TAF_MASK 0x4u
+#define RTC_SR_TAF_SHIFT 2
+#define RTC_SR_TCE_MASK 0x10u
+#define RTC_SR_TCE_SHIFT 4
+/* LR Bit Fields */
+#define RTC_LR_TCL_MASK 0x8u
+#define RTC_LR_TCL_SHIFT 3
+#define RTC_LR_CRL_MASK 0x10u
+#define RTC_LR_CRL_SHIFT 4
+#define RTC_LR_SRL_MASK 0x20u
+#define RTC_LR_SRL_SHIFT 5
+#define RTC_LR_LRL_MASK 0x40u
+#define RTC_LR_LRL_SHIFT 6
+/* IER Bit Fields */
+#define RTC_IER_TIIE_MASK 0x1u
+#define RTC_IER_TIIE_SHIFT 0
+#define RTC_IER_TOIE_MASK 0x2u
+#define RTC_IER_TOIE_SHIFT 1
+#define RTC_IER_TAIE_MASK 0x4u
+#define RTC_IER_TAIE_SHIFT 2
+#define RTC_IER_TSIE_MASK 0x10u
+#define RTC_IER_TSIE_SHIFT 4
+/* WAR Bit Fields */
+#define RTC_WAR_TSRW_MASK 0x1u
+#define RTC_WAR_TSRW_SHIFT 0
+#define RTC_WAR_TPRW_MASK 0x2u
+#define RTC_WAR_TPRW_SHIFT 1
+#define RTC_WAR_TARW_MASK 0x4u
+#define RTC_WAR_TARW_SHIFT 2
+#define RTC_WAR_TCRW_MASK 0x8u
+#define RTC_WAR_TCRW_SHIFT 3
+#define RTC_WAR_CRW_MASK 0x10u
+#define RTC_WAR_CRW_SHIFT 4
+#define RTC_WAR_SRW_MASK 0x20u
+#define RTC_WAR_SRW_SHIFT 5
+#define RTC_WAR_LRW_MASK 0x40u
+#define RTC_WAR_LRW_SHIFT 6
+#define RTC_WAR_IERW_MASK 0x80u
+#define RTC_WAR_IERW_SHIFT 7
+/* RAR Bit Fields */
+#define RTC_RAR_TSRR_MASK 0x1u
+#define RTC_RAR_TSRR_SHIFT 0
+#define RTC_RAR_TPRR_MASK 0x2u
+#define RTC_RAR_TPRR_SHIFT 1
+#define RTC_RAR_TARR_MASK 0x4u
+#define RTC_RAR_TARR_SHIFT 2
+#define RTC_RAR_TCRR_MASK 0x8u
+#define RTC_RAR_TCRR_SHIFT 3
+#define RTC_RAR_CRR_MASK 0x10u
+#define RTC_RAR_CRR_SHIFT 4
+#define RTC_RAR_SRR_MASK 0x20u
+#define RTC_RAR_SRR_SHIFT 5
+#define RTC_RAR_LRR_MASK 0x40u
+#define RTC_RAR_LRR_SHIFT 6
+#define RTC_RAR_IERR_MASK 0x80u
+#define RTC_RAR_IERR_SHIFT 7
+
+/**
+ * @}
+ */ /* end of group RTC_Register_Masks */
+
+
+/* RTC - Peripheral instance base addresses */
+/** Peripheral RTC base address */
+#define RTC_BASE (0x4003D000u)
+/** Peripheral RTC base pointer */
+#define RTC ((RTC_Type *)RTC_BASE)
+
+/**
+ * @}
+ */ /* end of group RTC_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- SIM Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup SIM_Peripheral_Access_Layer SIM Peripheral Access Layer
+ * @{
+ */
+
+/** SIM - Register Layout Typedef */
+typedef struct {
+ __IO uint32_t SOPT1; /**< System Options Register 1, offset: 0x0 */
+ __IO uint32_t SOPT1CFG; /**< SOPT1 Configuration Register, offset: 0x4 */
+ uint8_t RESERVED_0[4092];
+ __IO uint32_t SOPT2; /**< System Options Register 2, offset: 0x1004 */
+ uint8_t RESERVED_1[4];
+ __IO uint32_t SOPT4; /**< System Options Register 4, offset: 0x100C */
+ __IO uint32_t SOPT5; /**< System Options Register 5, offset: 0x1010 */
+ uint8_t RESERVED_2[4];
+ __IO uint32_t SOPT7; /**< System Options Register 7, offset: 0x1018 */
+ uint8_t RESERVED_3[8];
+ __I uint32_t SDID; /**< System Device Identification Register, offset: 0x1024 */
+ __IO uint32_t SCGC1; /**< System Clock Gating Control Register 1, offset: 0x1028 */
+ __IO uint32_t SCGC2; /**< System Clock Gating Control Register 2, offset: 0x102C */
+ __IO uint32_t SCGC3; /**< System Clock Gating Control Register 3, offset: 0x1030 */
+ __IO uint32_t SCGC4; /**< System Clock Gating Control Register 4, offset: 0x1034 */
+ __IO uint32_t SCGC5; /**< System Clock Gating Control Register 5, offset: 0x1038 */
+ __IO uint32_t SCGC6; /**< System Clock Gating Control Register 6, offset: 0x103C */
+ __IO uint32_t SCGC7; /**< System Clock Gating Control Register 7, offset: 0x1040 */
+ __IO uint32_t CLKDIV1; /**< System Clock Divider Register 1, offset: 0x1044 */
+ __IO uint32_t CLKDIV2; /**< System Clock Divider Register 2, offset: 0x1048 */
+ __IO uint32_t FCFG1; /**< Flash Configuration Register 1, offset: 0x104C */
+ __I uint32_t FCFG2; /**< Flash Configuration Register 2, offset: 0x1050 */
+ __I uint32_t UIDH; /**< Unique Identification Register High, offset: 0x1054 */
+ __I uint32_t UIDMH; /**< Unique Identification Register Mid-High, offset: 0x1058 */
+ __I uint32_t UIDML; /**< Unique Identification Register Mid Low, offset: 0x105C */
+ __I uint32_t UIDL; /**< Unique Identification Register Low, offset: 0x1060 */
+} SIM_Type;
+
+/* ----------------------------------------------------------------------------
+ -- SIM Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup SIM_Register_Masks SIM Register Masks
+ * @{
+ */
+
+/* SOPT1 Bit Fields */
+#define SIM_SOPT1_RAMSIZE_MASK 0xF000u
+#define SIM_SOPT1_RAMSIZE_SHIFT 12
+#define SIM_SOPT1_RAMSIZE(x) (((uint32_t)(((uint32_t)(x))<<SIM_SOPT1_RAMSIZE_SHIFT))&SIM_SOPT1_RAMSIZE_MASK)
+#define SIM_SOPT1_OSC32KSEL_MASK 0xC0000u
+#define SIM_SOPT1_OSC32KSEL_SHIFT 18
+#define SIM_SOPT1_OSC32KSEL(x) (((uint32_t)(((uint32_t)(x))<<SIM_SOPT1_OSC32KSEL_SHIFT))&SIM_SOPT1_OSC32KSEL_MASK)
+#define SIM_SOPT1_USBVSTBY_MASK 0x20000000u
+#define SIM_SOPT1_USBVSTBY_SHIFT 29
+#define SIM_SOPT1_USBSSTBY_MASK 0x40000000u
+#define SIM_SOPT1_USBSSTBY_SHIFT 30
+#define SIM_SOPT1_USBREGEN_MASK 0x80000000u
+#define SIM_SOPT1_USBREGEN_SHIFT 31
+/* SOPT1CFG Bit Fields */
+#define SIM_SOPT1CFG_URWE_MASK 0x1000000u
+#define SIM_SOPT1CFG_URWE_SHIFT 24
+#define SIM_SOPT1CFG_UVSWE_MASK 0x2000000u
+#define SIM_SOPT1CFG_UVSWE_SHIFT 25
+#define SIM_SOPT1CFG_USSWE_MASK 0x4000000u
+#define SIM_SOPT1CFG_USSWE_SHIFT 26
+/* SOPT2 Bit Fields */
+#define SIM_SOPT2_RTCCLKOUTSEL_MASK 0x10u
+#define SIM_SOPT2_RTCCLKOUTSEL_SHIFT 4
+#define SIM_SOPT2_CLKOUTSEL_MASK 0xE0u
+#define SIM_SOPT2_CLKOUTSEL_SHIFT 5
+#define SIM_SOPT2_CLKOUTSEL(x) (((uint32_t)(((uint32_t)(x))<<SIM_SOPT2_CLKOUTSEL_SHIFT))&SIM_SOPT2_CLKOUTSEL_MASK)
+#define SIM_SOPT2_PTD7PAD_MASK 0x800u
+#define SIM_SOPT2_PTD7PAD_SHIFT 11
+#define SIM_SOPT2_TRACECLKSEL_MASK 0x1000u
+#define SIM_SOPT2_TRACECLKSEL_SHIFT 12
+#define SIM_SOPT2_PLLFLLSEL_MASK 0x10000u
+#define SIM_SOPT2_PLLFLLSEL_SHIFT 16
+#define SIM_SOPT2_USBSRC_MASK 0x40000u
+#define SIM_SOPT2_USBSRC_SHIFT 18
+/* SOPT4 Bit Fields */
+#define SIM_SOPT4_FTM0FLT0_MASK 0x1u
+#define SIM_SOPT4_FTM0FLT0_SHIFT 0
+#define SIM_SOPT4_FTM0FLT1_MASK 0x2u
+#define SIM_SOPT4_FTM0FLT1_SHIFT 1
+#define SIM_SOPT4_FTM0FLT2_MASK 0x4u
+#define SIM_SOPT4_FTM0FLT2_SHIFT 2
+#define SIM_SOPT4_FTM1FLT0_MASK 0x10u
+#define SIM_SOPT4_FTM1FLT0_SHIFT 4
+#define SIM_SOPT4_FTM2FLT0_MASK 0x100u
+#define SIM_SOPT4_FTM2FLT0_SHIFT 8
+#define SIM_SOPT4_FTM1CH0SRC_MASK 0xC0000u
+#define SIM_SOPT4_FTM1CH0SRC_SHIFT 18
+#define SIM_SOPT4_FTM1CH0SRC(x) (((uint32_t)(((uint32_t)(x))<<SIM_SOPT4_FTM1CH0SRC_SHIFT))&SIM_SOPT4_FTM1CH0SRC_MASK)
+#define SIM_SOPT4_FTM2CH0SRC_MASK 0x300000u
+#define SIM_SOPT4_FTM2CH0SRC_SHIFT 20
+#define SIM_SOPT4_FTM2CH0SRC(x) (((uint32_t)(((uint32_t)(x))<<SIM_SOPT4_FTM2CH0SRC_SHIFT))&SIM_SOPT4_FTM2CH0SRC_MASK)
+#define SIM_SOPT4_FTM0CLKSEL_MASK 0x1000000u
+#define SIM_SOPT4_FTM0CLKSEL_SHIFT 24
+#define SIM_SOPT4_FTM1CLKSEL_MASK 0x2000000u
+#define SIM_SOPT4_FTM1CLKSEL_SHIFT 25
+#define SIM_SOPT4_FTM2CLKSEL_MASK 0x4000000u
+#define SIM_SOPT4_FTM2CLKSEL_SHIFT 26
+#define SIM_SOPT4_FTM0TRG0SRC_MASK 0x10000000u
+#define SIM_SOPT4_FTM0TRG0SRC_SHIFT 28
+#define SIM_SOPT4_FTM0TRG1SRC_MASK 0x20000000u
+#define SIM_SOPT4_FTM0TRG1SRC_SHIFT 29
+/* SOPT5 Bit Fields */
+#define SIM_SOPT5_UART0TXSRC_MASK 0x1u
+#define SIM_SOPT5_UART0TXSRC_SHIFT 0
+#define SIM_SOPT5_UART0RXSRC_MASK 0xCu
+#define SIM_SOPT5_UART0RXSRC_SHIFT 2
+#define SIM_SOPT5_UART0RXSRC(x) (((uint32_t)(((uint32_t)(x))<<SIM_SOPT5_UART0RXSRC_SHIFT))&SIM_SOPT5_UART0RXSRC_MASK)
+#define SIM_SOPT5_UART1TXSRC_MASK 0x10u
+#define SIM_SOPT5_UART1TXSRC_SHIFT 4
+#define SIM_SOPT5_UART1RXSRC_MASK 0xC0u
+#define SIM_SOPT5_UART1RXSRC_SHIFT 6
+#define SIM_SOPT5_UART1RXSRC(x) (((uint32_t)(((uint32_t)(x))<<SIM_SOPT5_UART1RXSRC_SHIFT))&SIM_SOPT5_UART1RXSRC_MASK)
+/* SOPT7 Bit Fields */
+#define SIM_SOPT7_ADC0TRGSEL_MASK 0xFu
+#define SIM_SOPT7_ADC0TRGSEL_SHIFT 0
+#define SIM_SOPT7_ADC0TRGSEL(x) (((uint32_t)(((uint32_t)(x))<<SIM_SOPT7_ADC0TRGSEL_SHIFT))&SIM_SOPT7_ADC0TRGSEL_MASK)
+#define SIM_SOPT7_ADC0PRETRGSEL_MASK 0x10u
+#define SIM_SOPT7_ADC0PRETRGSEL_SHIFT 4
+#define SIM_SOPT7_ADC0ALTTRGEN_MASK 0x80u
+#define SIM_SOPT7_ADC0ALTTRGEN_SHIFT 7
+#define SIM_SOPT7_ADC1TRGSEL_MASK 0xF00u
+#define SIM_SOPT7_ADC1TRGSEL_SHIFT 8
+#define SIM_SOPT7_ADC1TRGSEL(x) (((uint32_t)(((uint32_t)(x))<<SIM_SOPT7_ADC1TRGSEL_SHIFT))&SIM_SOPT7_ADC1TRGSEL_MASK)
+#define SIM_SOPT7_ADC1PRETRGSEL_MASK 0x1000u
+#define SIM_SOPT7_ADC1PRETRGSEL_SHIFT 12
+#define SIM_SOPT7_ADC1ALTTRGEN_MASK 0x8000u
+#define SIM_SOPT7_ADC1ALTTRGEN_SHIFT 15
+/* SDID Bit Fields */
+#define SIM_SDID_PINID_MASK 0xFu
+#define SIM_SDID_PINID_SHIFT 0
+#define SIM_SDID_PINID(x) (((uint32_t)(((uint32_t)(x))<<SIM_SDID_PINID_SHIFT))&SIM_SDID_PINID_MASK)
+#define SIM_SDID_FAMID_MASK 0x70u
+#define SIM_SDID_FAMID_SHIFT 4
+#define SIM_SDID_FAMID(x) (((uint32_t)(((uint32_t)(x))<<SIM_SDID_FAMID_SHIFT))&SIM_SDID_FAMID_MASK)
+#define SIM_SDID_REVID_MASK 0xF000u
+#define SIM_SDID_REVID_SHIFT 12
+#define SIM_SDID_REVID(x) (((uint32_t)(((uint32_t)(x))<<SIM_SDID_REVID_SHIFT))&SIM_SDID_REVID_MASK)
+/* SCGC2 Bit Fields */
+#define SIM_SCGC2_DAC0_MASK 0x1000u
+#define SIM_SCGC2_DAC0_SHIFT 12
+/* SCGC3 Bit Fields */
+#define SIM_SCGC3_FTM2_MASK 0x1000000u
+#define SIM_SCGC3_FTM2_SHIFT 24
+#define SIM_SCGC3_ADC1_MASK 0x8000000u
+#define SIM_SCGC3_ADC1_SHIFT 27
+/* SCGC4 Bit Fields */
+#define SIM_SCGC4_EWM_MASK 0x2u
+#define SIM_SCGC4_EWM_SHIFT 1
+#define SIM_SCGC4_CMT_MASK 0x4u
+#define SIM_SCGC4_CMT_SHIFT 2
+#define SIM_SCGC4_I2C0_MASK 0x40u
+#define SIM_SCGC4_I2C0_SHIFT 6
+#define SIM_SCGC4_I2C1_MASK 0x80u
+#define SIM_SCGC4_I2C1_SHIFT 7
+#define SIM_SCGC4_UART0_MASK 0x400u
+#define SIM_SCGC4_UART0_SHIFT 10
+#define SIM_SCGC4_UART1_MASK 0x800u
+#define SIM_SCGC4_UART1_SHIFT 11
+#define SIM_SCGC4_UART2_MASK 0x1000u
+#define SIM_SCGC4_UART2_SHIFT 12
+#define SIM_SCGC4_USBOTG_MASK 0x40000u
+#define SIM_SCGC4_USBOTG_SHIFT 18
+#define SIM_SCGC4_CMP_MASK 0x80000u
+#define SIM_SCGC4_CMP_SHIFT 19
+#define SIM_SCGC4_VREF_MASK 0x100000u
+#define SIM_SCGC4_VREF_SHIFT 20
+/* SCGC5 Bit Fields */
+#define SIM_SCGC5_LPTIMER_MASK 0x1u
+#define SIM_SCGC5_LPTIMER_SHIFT 0
+#define SIM_SCGC5_TSI_MASK 0x20u
+#define SIM_SCGC5_TSI_SHIFT 5
+#define SIM_SCGC5_PORTA_MASK 0x200u
+#define SIM_SCGC5_PORTA_SHIFT 9
+#define SIM_SCGC5_PORTB_MASK 0x400u
+#define SIM_SCGC5_PORTB_SHIFT 10
+#define SIM_SCGC5_PORTC_MASK 0x800u
+#define SIM_SCGC5_PORTC_SHIFT 11
+#define SIM_SCGC5_PORTD_MASK 0x1000u
+#define SIM_SCGC5_PORTD_SHIFT 12
+#define SIM_SCGC5_PORTE_MASK 0x2000u
+#define SIM_SCGC5_PORTE_SHIFT 13
+/* SCGC6 Bit Fields */
+#define SIM_SCGC6_FTFL_MASK 0x1u
+#define SIM_SCGC6_FTFL_SHIFT 0
+#define SIM_SCGC6_DMAMUX_MASK 0x2u
+#define SIM_SCGC6_DMAMUX_SHIFT 1
+#define SIM_SCGC6_FLEXCAN0_MASK 0x10u
+#define SIM_SCGC6_FLEXCAN0_SHIFT 4
+#define SIM_SCGC6_SPI0_MASK 0x1000u
+#define SIM_SCGC6_SPI0_SHIFT 12
+#define SIM_SCGC6_SPI1_MASK 0x2000u
+#define SIM_SCGC6_SPI1_SHIFT 13
+#define SIM_SCGC6_I2S_MASK 0x8000u
+#define SIM_SCGC6_I2S_SHIFT 15
+#define SIM_SCGC6_CRC_MASK 0x40000u
+#define SIM_SCGC6_CRC_SHIFT 18
+#define SIM_SCGC6_USBDCD_MASK 0x200000u
+#define SIM_SCGC6_USBDCD_SHIFT 21
+#define SIM_SCGC6_PDB_MASK 0x400000u
+#define SIM_SCGC6_PDB_SHIFT 22
+#define SIM_SCGC6_PIT_MASK 0x800000u
+#define SIM_SCGC6_PIT_SHIFT 23
+#define SIM_SCGC6_FTM0_MASK 0x1000000u
+#define SIM_SCGC6_FTM0_SHIFT 24
+#define SIM_SCGC6_FTM1_MASK 0x2000000u
+#define SIM_SCGC6_FTM1_SHIFT 25
+#define SIM_SCGC6_ADC0_MASK 0x8000000u
+#define SIM_SCGC6_ADC0_SHIFT 27
+#define SIM_SCGC6_RTC_MASK 0x20000000u
+#define SIM_SCGC6_RTC_SHIFT 29
+/* SCGC7 Bit Fields */
+#define SIM_SCGC7_DMA_MASK 0x2u
+#define SIM_SCGC7_DMA_SHIFT 1
+/* CLKDIV1 Bit Fields */
+#define SIM_CLKDIV1_OUTDIV4_MASK 0xF0000u
+#define SIM_CLKDIV1_OUTDIV4_SHIFT 16
+#define SIM_CLKDIV1_OUTDIV4(x) (((uint32_t)(((uint32_t)(x))<<SIM_CLKDIV1_OUTDIV4_SHIFT))&SIM_CLKDIV1_OUTDIV4_MASK)
+#define SIM_CLKDIV1_OUTDIV2_MASK 0xF000000u
+#define SIM_CLKDIV1_OUTDIV2_SHIFT 24
+#define SIM_CLKDIV1_OUTDIV2(x) (((uint32_t)(((uint32_t)(x))<<SIM_CLKDIV1_OUTDIV2_SHIFT))&SIM_CLKDIV1_OUTDIV2_MASK)
+#define SIM_CLKDIV1_OUTDIV1_MASK 0xF0000000u
+#define SIM_CLKDIV1_OUTDIV1_SHIFT 28
+#define SIM_CLKDIV1_OUTDIV1(x) (((uint32_t)(((uint32_t)(x))<<SIM_CLKDIV1_OUTDIV1_SHIFT))&SIM_CLKDIV1_OUTDIV1_MASK)
+/* CLKDIV2 Bit Fields */
+#define SIM_CLKDIV2_USBFRAC_MASK 0x1u
+#define SIM_CLKDIV2_USBFRAC_SHIFT 0
+#define SIM_CLKDIV2_USBDIV_MASK 0xEu
+#define SIM_CLKDIV2_USBDIV_SHIFT 1
+#define SIM_CLKDIV2_USBDIV(x) (((uint32_t)(((uint32_t)(x))<<SIM_CLKDIV2_USBDIV_SHIFT))&SIM_CLKDIV2_USBDIV_MASK)
+/* FCFG1 Bit Fields */
+#define SIM_FCFG1_FLASHDIS_MASK 0x1u
+#define SIM_FCFG1_FLASHDIS_SHIFT 0
+#define SIM_FCFG1_FLASHDOZE_MASK 0x2u
+#define SIM_FCFG1_FLASHDOZE_SHIFT 1
+#define SIM_FCFG1_DEPART_MASK 0xF00u
+#define SIM_FCFG1_DEPART_SHIFT 8
+#define SIM_FCFG1_DEPART(x) (((uint32_t)(((uint32_t)(x))<<SIM_FCFG1_DEPART_SHIFT))&SIM_FCFG1_DEPART_MASK)
+#define SIM_FCFG1_EESIZE_MASK 0xF0000u
+#define SIM_FCFG1_EESIZE_SHIFT 16
+#define SIM_FCFG1_EESIZE(x) (((uint32_t)(((uint32_t)(x))<<SIM_FCFG1_EESIZE_SHIFT))&SIM_FCFG1_EESIZE_MASK)
+#define SIM_FCFG1_PFSIZE_MASK 0xF000000u
+#define SIM_FCFG1_PFSIZE_SHIFT 24
+#define SIM_FCFG1_PFSIZE(x) (((uint32_t)(((uint32_t)(x))<<SIM_FCFG1_PFSIZE_SHIFT))&SIM_FCFG1_PFSIZE_MASK)
+#define SIM_FCFG1_NVMSIZE_MASK 0xF0000000u
+#define SIM_FCFG1_NVMSIZE_SHIFT 28
+#define SIM_FCFG1_NVMSIZE(x) (((uint32_t)(((uint32_t)(x))<<SIM_FCFG1_NVMSIZE_SHIFT))&SIM_FCFG1_NVMSIZE_MASK)
+/* FCFG2 Bit Fields */
+#define SIM_FCFG2_MAXADDR1_MASK 0x7F0000u
+#define SIM_FCFG2_MAXADDR1_SHIFT 16
+#define SIM_FCFG2_MAXADDR1(x) (((uint32_t)(((uint32_t)(x))<<SIM_FCFG2_MAXADDR1_SHIFT))&SIM_FCFG2_MAXADDR1_MASK)
+#define SIM_FCFG2_PFLSH_MASK 0x800000u
+#define SIM_FCFG2_PFLSH_SHIFT 23
+#define SIM_FCFG2_MAXADDR0_MASK 0x7F000000u
+#define SIM_FCFG2_MAXADDR0_SHIFT 24
+#define SIM_FCFG2_MAXADDR0(x) (((uint32_t)(((uint32_t)(x))<<SIM_FCFG2_MAXADDR0_SHIFT))&SIM_FCFG2_MAXADDR0_MASK)
+/* UIDH Bit Fields */
+#define SIM_UIDH_UID_MASK 0xFFFFFFFFu
+#define SIM_UIDH_UID_SHIFT 0
+#define SIM_UIDH_UID(x) (((uint32_t)(((uint32_t)(x))<<SIM_UIDH_UID_SHIFT))&SIM_UIDH_UID_MASK)
+/* UIDMH Bit Fields */
+#define SIM_UIDMH_UID_MASK 0xFFFFFFFFu
+#define SIM_UIDMH_UID_SHIFT 0
+#define SIM_UIDMH_UID(x) (((uint32_t)(((uint32_t)(x))<<SIM_UIDMH_UID_SHIFT))&SIM_UIDMH_UID_MASK)
+/* UIDML Bit Fields */
+#define SIM_UIDML_UID_MASK 0xFFFFFFFFu
+#define SIM_UIDML_UID_SHIFT 0
+#define SIM_UIDML_UID(x) (((uint32_t)(((uint32_t)(x))<<SIM_UIDML_UID_SHIFT))&SIM_UIDML_UID_MASK)
+/* UIDL Bit Fields */
+#define SIM_UIDL_UID_MASK 0xFFFFFFFFu
+#define SIM_UIDL_UID_SHIFT 0
+#define SIM_UIDL_UID(x) (((uint32_t)(((uint32_t)(x))<<SIM_UIDL_UID_SHIFT))&SIM_UIDL_UID_MASK)
+
+/**
+ * @}
+ */ /* end of group SIM_Register_Masks */
+
+
+/* SIM - Peripheral instance base addresses */
+/** Peripheral SIM base address */
+#define SIM_BASE (0x40047000u)
+/** Peripheral SIM base pointer */
+#define SIM ((SIM_Type *)SIM_BASE)
+
+/**
+ * @}
+ */ /* end of group SIM_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- SMC Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup SMC_Peripheral_Access_Layer SMC Peripheral Access Layer
+ * @{
+ */
+
+/** SMC - Register Layout Typedef */
+typedef struct {
+ __IO uint8_t PMPROT; /**< Power Mode Protection Register, offset: 0x0 */
+ __IO uint8_t PMCTRL; /**< Power Mode Control Register, offset: 0x1 */
+ __IO uint8_t VLLSCTRL; /**< VLLS Control Register, offset: 0x2 */
+ __I uint8_t PMSTAT; /**< Power Mode Status Register, offset: 0x3 */
+} SMC_Type;
+
+/* ----------------------------------------------------------------------------
+ -- SMC Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup SMC_Register_Masks SMC Register Masks
+ * @{
+ */
+
+/* PMPROT Bit Fields */
+#define SMC_PMPROT_AVLLS_MASK 0x2u
+#define SMC_PMPROT_AVLLS_SHIFT 1
+#define SMC_PMPROT_ALLS_MASK 0x8u
+#define SMC_PMPROT_ALLS_SHIFT 3
+#define SMC_PMPROT_AVLP_MASK 0x20u
+#define SMC_PMPROT_AVLP_SHIFT 5
+/* PMCTRL Bit Fields */
+#define SMC_PMCTRL_STOPM_MASK 0x7u
+#define SMC_PMCTRL_STOPM_SHIFT 0
+#define SMC_PMCTRL_STOPM(x) (((uint8_t)(((uint8_t)(x))<<SMC_PMCTRL_STOPM_SHIFT))&SMC_PMCTRL_STOPM_MASK)
+#define SMC_PMCTRL_STOPA_MASK 0x8u
+#define SMC_PMCTRL_STOPA_SHIFT 3
+#define SMC_PMCTRL_RUNM_MASK 0x60u
+#define SMC_PMCTRL_RUNM_SHIFT 5
+#define SMC_PMCTRL_RUNM(x) (((uint8_t)(((uint8_t)(x))<<SMC_PMCTRL_RUNM_SHIFT))&SMC_PMCTRL_RUNM_MASK)
+#define SMC_PMCTRL_LPWUI_MASK 0x80u
+#define SMC_PMCTRL_LPWUI_SHIFT 7
+/* VLLSCTRL Bit Fields */
+#define SMC_VLLSCTRL_VLLSM_MASK 0x7u
+#define SMC_VLLSCTRL_VLLSM_SHIFT 0
+#define SMC_VLLSCTRL_VLLSM(x) (((uint8_t)(((uint8_t)(x))<<SMC_VLLSCTRL_VLLSM_SHIFT))&SMC_VLLSCTRL_VLLSM_MASK)
+#define SMC_VLLSCTRL_PORPO_MASK 0x20u
+#define SMC_VLLSCTRL_PORPO_SHIFT 5
+/* PMSTAT Bit Fields */
+#define SMC_PMSTAT_PMSTAT_MASK 0x7Fu
+#define SMC_PMSTAT_PMSTAT_SHIFT 0
+#define SMC_PMSTAT_PMSTAT(x) (((uint8_t)(((uint8_t)(x))<<SMC_PMSTAT_PMSTAT_SHIFT))&SMC_PMSTAT_PMSTAT_MASK)
+
+/**
+ * @}
+ */ /* end of group SMC_Register_Masks */
+
+
+/* SMC - Peripheral instance base addresses */
+/** Peripheral SMC base address */
+#define SMC_BASE (0x4007E000u)
+/** Peripheral SMC base pointer */
+#define SMC ((SMC_Type *)SMC_BASE)
+
+/**
+ * @}
+ */ /* end of group SMC_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- SPI Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup SPI_Peripheral_Access_Layer SPI Peripheral Access Layer
+ * @{
+ */
+
+/** SPI - Register Layout Typedef */
+typedef struct {
+ __IO uint32_t MCR; /**< DSPI Module Configuration Register, offset: 0x0 */
+ uint8_t RESERVED_0[4];
+ __IO uint32_t TCR; /**< DSPI Transfer Count Register, offset: 0x8 */
+ union { /* offset: 0xC */
+ __IO uint32_t CTAR[2]; /**< DSPI Clock and Transfer Attributes Register (In Master Mode), array offset: 0xC, array step: 0x4 */
+ __IO uint32_t CTAR_SLAVE[1]; /**< DSPI Clock and Transfer Attributes Register (In Slave Mode), array offset: 0xC, array step: 0x4 */
+ };
+ uint8_t RESERVED_1[24];
+ __IO uint32_t SR; /**< DSPI Status Register, offset: 0x2C */
+ __IO uint32_t RSER; /**< DSPI DMA/Interrupt Request Select and Enable Register, offset: 0x30 */
+ union { /* offset: 0x34 */
+ __IO uint32_t PUSHR; /**< DSPI PUSH TX FIFO Register In Master Mode, offset: 0x34 */
+ __IO uint32_t PUSHR_SLAVE; /**< DSPI PUSH TX FIFO Register In Slave Mode, offset: 0x34 */
+ };
+ __I uint32_t POPR; /**< DSPI POP RX FIFO Register, offset: 0x38 */
+ __I uint32_t TXFR0; /**< DSPI Transmit FIFO Registers, offset: 0x3C */
+ __I uint32_t TXFR1; /**< DSPI Transmit FIFO Registers, offset: 0x40 */
+ __I uint32_t TXFR2; /**< DSPI Transmit FIFO Registers, offset: 0x44 */
+ __I uint32_t TXFR3; /**< DSPI Transmit FIFO Registers, offset: 0x48 */
+ uint8_t RESERVED_2[48];
+ __I uint32_t RXFR0; /**< DSPI Receive FIFO Registers, offset: 0x7C */
+ __I uint32_t RXFR1; /**< DSPI Receive FIFO Registers, offset: 0x80 */
+ __I uint32_t RXFR2; /**< DSPI Receive FIFO Registers, offset: 0x84 */
+ __I uint32_t RXFR3; /**< DSPI Receive FIFO Registers, offset: 0x88 */
+} SPI_Type;
+
+/* ----------------------------------------------------------------------------
+ -- SPI Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup SPI_Register_Masks SPI Register Masks
+ * @{
+ */
+
+/* MCR Bit Fields */
+#define SPI_MCR_HALT_MASK 0x1u
+#define SPI_MCR_HALT_SHIFT 0
+#define SPI_MCR_SMPL_PT_MASK 0x300u
+#define SPI_MCR_SMPL_PT_SHIFT 8
+#define SPI_MCR_SMPL_PT(x) (((uint32_t)(((uint32_t)(x))<<SPI_MCR_SMPL_PT_SHIFT))&SPI_MCR_SMPL_PT_MASK)
+#define SPI_MCR_CLR_RXF_MASK 0x400u
+#define SPI_MCR_CLR_RXF_SHIFT 10
+#define SPI_MCR_CLR_TXF_MASK 0x800u
+#define SPI_MCR_CLR_TXF_SHIFT 11
+#define SPI_MCR_DIS_RXF_MASK 0x1000u
+#define SPI_MCR_DIS_RXF_SHIFT 12
+#define SPI_MCR_DIS_TXF_MASK 0x2000u
+#define SPI_MCR_DIS_TXF_SHIFT 13
+#define SPI_MCR_MDIS_MASK 0x4000u
+#define SPI_MCR_MDIS_SHIFT 14
+#define SPI_MCR_DOZE_MASK 0x8000u
+#define SPI_MCR_DOZE_SHIFT 15
+#define SPI_MCR_PCSIS_MASK 0x3F0000u
+#define SPI_MCR_PCSIS_SHIFT 16
+#define SPI_MCR_PCSIS(x) (((uint32_t)(((uint32_t)(x))<<SPI_MCR_PCSIS_SHIFT))&SPI_MCR_PCSIS_MASK)
+#define SPI_MCR_ROOE_MASK 0x1000000u
+#define SPI_MCR_ROOE_SHIFT 24
+#define SPI_MCR_PCSSE_MASK 0x2000000u
+#define SPI_MCR_PCSSE_SHIFT 25
+#define SPI_MCR_MTFE_MASK 0x4000000u
+#define SPI_MCR_MTFE_SHIFT 26
+#define SPI_MCR_FRZ_MASK 0x8000000u
+#define SPI_MCR_FRZ_SHIFT 27
+#define SPI_MCR_DCONF_MASK 0x30000000u
+#define SPI_MCR_DCONF_SHIFT 28
+#define SPI_MCR_DCONF(x) (((uint32_t)(((uint32_t)(x))<<SPI_MCR_DCONF_SHIFT))&SPI_MCR_DCONF_MASK)
+#define SPI_MCR_CONT_SCKE_MASK 0x40000000u
+#define SPI_MCR_CONT_SCKE_SHIFT 30
+#define SPI_MCR_MSTR_MASK 0x80000000u
+#define SPI_MCR_MSTR_SHIFT 31
+/* TCR Bit Fields */
+#define SPI_TCR_SPI_TCNT_MASK 0xFFFF0000u
+#define SPI_TCR_SPI_TCNT_SHIFT 16
+#define SPI_TCR_SPI_TCNT(x) (((uint32_t)(((uint32_t)(x))<<SPI_TCR_SPI_TCNT_SHIFT))&SPI_TCR_SPI_TCNT_MASK)
+/* CTAR Bit Fields */
+#define SPI_CTAR_BR_MASK 0xFu
+#define SPI_CTAR_BR_SHIFT 0
+#define SPI_CTAR_BR(x) (((uint32_t)(((uint32_t)(x))<<SPI_CTAR_BR_SHIFT))&SPI_CTAR_BR_MASK)
+#define SPI_CTAR_DT_MASK 0xF0u
+#define SPI_CTAR_DT_SHIFT 4
+#define SPI_CTAR_DT(x) (((uint32_t)(((uint32_t)(x))<<SPI_CTAR_DT_SHIFT))&SPI_CTAR_DT_MASK)
+#define SPI_CTAR_ASC_MASK 0xF00u
+#define SPI_CTAR_ASC_SHIFT 8
+#define SPI_CTAR_ASC(x) (((uint32_t)(((uint32_t)(x))<<SPI_CTAR_ASC_SHIFT))&SPI_CTAR_ASC_MASK)
+#define SPI_CTAR_CSSCK_MASK 0xF000u
+#define SPI_CTAR_CSSCK_SHIFT 12
+#define SPI_CTAR_CSSCK(x) (((uint32_t)(((uint32_t)(x))<<SPI_CTAR_CSSCK_SHIFT))&SPI_CTAR_CSSCK_MASK)
+#define SPI_CTAR_PBR_MASK 0x30000u
+#define SPI_CTAR_PBR_SHIFT 16
+#define SPI_CTAR_PBR(x) (((uint32_t)(((uint32_t)(x))<<SPI_CTAR_PBR_SHIFT))&SPI_CTAR_PBR_MASK)
+#define SPI_CTAR_PDT_MASK 0xC0000u
+#define SPI_CTAR_PDT_SHIFT 18
+#define SPI_CTAR_PDT(x) (((uint32_t)(((uint32_t)(x))<<SPI_CTAR_PDT_SHIFT))&SPI_CTAR_PDT_MASK)
+#define SPI_CTAR_PASC_MASK 0x300000u
+#define SPI_CTAR_PASC_SHIFT 20
+#define SPI_CTAR_PASC(x) (((uint32_t)(((uint32_t)(x))<<SPI_CTAR_PASC_SHIFT))&SPI_CTAR_PASC_MASK)
+#define SPI_CTAR_PCSSCK_MASK 0xC00000u
+#define SPI_CTAR_PCSSCK_SHIFT 22
+#define SPI_CTAR_PCSSCK(x) (((uint32_t)(((uint32_t)(x))<<SPI_CTAR_PCSSCK_SHIFT))&SPI_CTAR_PCSSCK_MASK)
+#define SPI_CTAR_LSBFE_MASK 0x1000000u
+#define SPI_CTAR_LSBFE_SHIFT 24
+#define SPI_CTAR_CPHA_MASK 0x2000000u
+#define SPI_CTAR_CPHA_SHIFT 25
+#define SPI_CTAR_CPOL_MASK 0x4000000u
+#define SPI_CTAR_CPOL_SHIFT 26
+#define SPI_CTAR_FMSZ_MASK 0x78000000u
+#define SPI_CTAR_FMSZ_SHIFT 27
+#define SPI_CTAR_FMSZ(x) (((uint32_t)(((uint32_t)(x))<<SPI_CTAR_FMSZ_SHIFT))&SPI_CTAR_FMSZ_MASK)
+#define SPI_CTAR_DBR_MASK 0x80000000u
+#define SPI_CTAR_DBR_SHIFT 31
+/* CTAR_SLAVE Bit Fields */
+#define SPI_CTAR_SLAVE_CPHA_MASK 0x2000000u
+#define SPI_CTAR_SLAVE_CPHA_SHIFT 25
+#define SPI_CTAR_SLAVE_CPOL_MASK 0x4000000u
+#define SPI_CTAR_SLAVE_CPOL_SHIFT 26
+#define SPI_CTAR_SLAVE_FMSZ_MASK 0xF8000000u
+#define SPI_CTAR_SLAVE_FMSZ_SHIFT 27
+#define SPI_CTAR_SLAVE_FMSZ(x) (((uint32_t)(((uint32_t)(x))<<SPI_CTAR_SLAVE_FMSZ_SHIFT))&SPI_CTAR_SLAVE_FMSZ_MASK)
+/* SR Bit Fields */
+#define SPI_SR_POPNXTPTR_MASK 0xFu
+#define SPI_SR_POPNXTPTR_SHIFT 0
+#define SPI_SR_POPNXTPTR(x) (((uint32_t)(((uint32_t)(x))<<SPI_SR_POPNXTPTR_SHIFT))&SPI_SR_POPNXTPTR_MASK)
+#define SPI_SR_RXCTR_MASK 0xF0u
+#define SPI_SR_RXCTR_SHIFT 4
+#define SPI_SR_RXCTR(x) (((uint32_t)(((uint32_t)(x))<<SPI_SR_RXCTR_SHIFT))&SPI_SR_RXCTR_MASK)
+#define SPI_SR_TXNXTPTR_MASK 0xF00u
+#define SPI_SR_TXNXTPTR_SHIFT 8
+#define SPI_SR_TXNXTPTR(x) (((uint32_t)(((uint32_t)(x))<<SPI_SR_TXNXTPTR_SHIFT))&SPI_SR_TXNXTPTR_MASK)
+#define SPI_SR_TXCTR_MASK 0xF000u
+#define SPI_SR_TXCTR_SHIFT 12
+#define SPI_SR_TXCTR(x) (((uint32_t)(((uint32_t)(x))<<SPI_SR_TXCTR_SHIFT))&SPI_SR_TXCTR_MASK)
+#define SPI_SR_RFDF_MASK 0x20000u
+#define SPI_SR_RFDF_SHIFT 17
+#define SPI_SR_RFOF_MASK 0x80000u
+#define SPI_SR_RFOF_SHIFT 19
+#define SPI_SR_TFFF_MASK 0x2000000u
+#define SPI_SR_TFFF_SHIFT 25
+#define SPI_SR_TFUF_MASK 0x8000000u
+#define SPI_SR_TFUF_SHIFT 27
+#define SPI_SR_EOQF_MASK 0x10000000u
+#define SPI_SR_EOQF_SHIFT 28
+#define SPI_SR_TXRXS_MASK 0x40000000u
+#define SPI_SR_TXRXS_SHIFT 30
+#define SPI_SR_TCF_MASK 0x80000000u
+#define SPI_SR_TCF_SHIFT 31
+/* RSER Bit Fields */
+#define SPI_RSER_RFDF_DIRS_MASK 0x10000u
+#define SPI_RSER_RFDF_DIRS_SHIFT 16
+#define SPI_RSER_RFDF_RE_MASK 0x20000u
+#define SPI_RSER_RFDF_RE_SHIFT 17
+#define SPI_RSER_RFOF_RE_MASK 0x80000u
+#define SPI_RSER_RFOF_RE_SHIFT 19
+#define SPI_RSER_TFFF_DIRS_MASK 0x1000000u
+#define SPI_RSER_TFFF_DIRS_SHIFT 24
+#define SPI_RSER_TFFF_RE_MASK 0x2000000u
+#define SPI_RSER_TFFF_RE_SHIFT 25
+#define SPI_RSER_TFUF_RE_MASK 0x8000000u
+#define SPI_RSER_TFUF_RE_SHIFT 27
+#define SPI_RSER_EOQF_RE_MASK 0x10000000u
+#define SPI_RSER_EOQF_RE_SHIFT 28
+#define SPI_RSER_TCF_RE_MASK 0x80000000u
+#define SPI_RSER_TCF_RE_SHIFT 31
+/* PUSHR Bit Fields */
+#define SPI_PUSHR_TXDATA_MASK 0xFFFFu
+#define SPI_PUSHR_TXDATA_SHIFT 0
+#define SPI_PUSHR_TXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_PUSHR_TXDATA_SHIFT))&SPI_PUSHR_TXDATA_MASK)
+#define SPI_PUSHR_PCS_MASK 0x3F0000u
+#define SPI_PUSHR_PCS_SHIFT 16
+#define SPI_PUSHR_PCS(x) (((uint32_t)(((uint32_t)(x))<<SPI_PUSHR_PCS_SHIFT))&SPI_PUSHR_PCS_MASK)
+#define SPI_PUSHR_CTCNT_MASK 0x4000000u
+#define SPI_PUSHR_CTCNT_SHIFT 26
+#define SPI_PUSHR_EOQ_MASK 0x8000000u
+#define SPI_PUSHR_EOQ_SHIFT 27
+#define SPI_PUSHR_CTAS_MASK 0x70000000u
+#define SPI_PUSHR_CTAS_SHIFT 28
+#define SPI_PUSHR_CTAS(x) (((uint32_t)(((uint32_t)(x))<<SPI_PUSHR_CTAS_SHIFT))&SPI_PUSHR_CTAS_MASK)
+#define SPI_PUSHR_CONT_MASK 0x80000000u
+#define SPI_PUSHR_CONT_SHIFT 31
+/* PUSHR_SLAVE Bit Fields */
+#define SPI_PUSHR_SLAVE_TXDATA_MASK 0xFFFFFFFFu
+#define SPI_PUSHR_SLAVE_TXDATA_SHIFT 0
+#define SPI_PUSHR_SLAVE_TXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_PUSHR_SLAVE_TXDATA_SHIFT))&SPI_PUSHR_SLAVE_TXDATA_MASK)
+/* POPR Bit Fields */
+#define SPI_POPR_RXDATA_MASK 0xFFFFFFFFu
+#define SPI_POPR_RXDATA_SHIFT 0
+#define SPI_POPR_RXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_POPR_RXDATA_SHIFT))&SPI_POPR_RXDATA_MASK)
+/* TXFR0 Bit Fields */
+#define SPI_TXFR0_TXDATA_MASK 0xFFFFu
+#define SPI_TXFR0_TXDATA_SHIFT 0
+#define SPI_TXFR0_TXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_TXFR0_TXDATA_SHIFT))&SPI_TXFR0_TXDATA_MASK)
+#define SPI_TXFR0_TXCMD_TXDATA_MASK 0xFFFF0000u
+#define SPI_TXFR0_TXCMD_TXDATA_SHIFT 16
+#define SPI_TXFR0_TXCMD_TXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_TXFR0_TXCMD_TXDATA_SHIFT))&SPI_TXFR0_TXCMD_TXDATA_MASK)
+/* TXFR1 Bit Fields */
+#define SPI_TXFR1_TXDATA_MASK 0xFFFFu
+#define SPI_TXFR1_TXDATA_SHIFT 0
+#define SPI_TXFR1_TXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_TXFR1_TXDATA_SHIFT))&SPI_TXFR1_TXDATA_MASK)
+#define SPI_TXFR1_TXCMD_TXDATA_MASK 0xFFFF0000u
+#define SPI_TXFR1_TXCMD_TXDATA_SHIFT 16
+#define SPI_TXFR1_TXCMD_TXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_TXFR1_TXCMD_TXDATA_SHIFT))&SPI_TXFR1_TXCMD_TXDATA_MASK)
+/* TXFR2 Bit Fields */
+#define SPI_TXFR2_TXDATA_MASK 0xFFFFu
+#define SPI_TXFR2_TXDATA_SHIFT 0
+#define SPI_TXFR2_TXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_TXFR2_TXDATA_SHIFT))&SPI_TXFR2_TXDATA_MASK)
+#define SPI_TXFR2_TXCMD_TXDATA_MASK 0xFFFF0000u
+#define SPI_TXFR2_TXCMD_TXDATA_SHIFT 16
+#define SPI_TXFR2_TXCMD_TXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_TXFR2_TXCMD_TXDATA_SHIFT))&SPI_TXFR2_TXCMD_TXDATA_MASK)
+/* TXFR3 Bit Fields */
+#define SPI_TXFR3_TXDATA_MASK 0xFFFFu
+#define SPI_TXFR3_TXDATA_SHIFT 0
+#define SPI_TXFR3_TXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_TXFR3_TXDATA_SHIFT))&SPI_TXFR3_TXDATA_MASK)
+#define SPI_TXFR3_TXCMD_TXDATA_MASK 0xFFFF0000u
+#define SPI_TXFR3_TXCMD_TXDATA_SHIFT 16
+#define SPI_TXFR3_TXCMD_TXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_TXFR3_TXCMD_TXDATA_SHIFT))&SPI_TXFR3_TXCMD_TXDATA_MASK)
+/* RXFR0 Bit Fields */
+#define SPI_RXFR0_RXDATA_MASK 0xFFFFFFFFu
+#define SPI_RXFR0_RXDATA_SHIFT 0
+#define SPI_RXFR0_RXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_RXFR0_RXDATA_SHIFT))&SPI_RXFR0_RXDATA_MASK)
+/* RXFR1 Bit Fields */
+#define SPI_RXFR1_RXDATA_MASK 0xFFFFFFFFu
+#define SPI_RXFR1_RXDATA_SHIFT 0
+#define SPI_RXFR1_RXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_RXFR1_RXDATA_SHIFT))&SPI_RXFR1_RXDATA_MASK)
+/* RXFR2 Bit Fields */
+#define SPI_RXFR2_RXDATA_MASK 0xFFFFFFFFu
+#define SPI_RXFR2_RXDATA_SHIFT 0
+#define SPI_RXFR2_RXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_RXFR2_RXDATA_SHIFT))&SPI_RXFR2_RXDATA_MASK)
+/* RXFR3 Bit Fields */
+#define SPI_RXFR3_RXDATA_MASK 0xFFFFFFFFu
+#define SPI_RXFR3_RXDATA_SHIFT 0
+#define SPI_RXFR3_RXDATA(x) (((uint32_t)(((uint32_t)(x))<<SPI_RXFR3_RXDATA_SHIFT))&SPI_RXFR3_RXDATA_MASK)
+
+/**
+ * @}
+ */ /* end of group SPI_Register_Masks */
+
+
+/* SPI - Peripheral instance base addresses */
+/** Peripheral SPI0 base address */
+#define SPI0_BASE (0x4002C000u)
+/** Peripheral SPI0 base pointer */
+#define SPI0 ((SPI_Type *)SPI0_BASE)
+
+/**
+ * @}
+ */ /* end of group SPI_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- TSI Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup TSI_Peripheral_Access_Layer TSI Peripheral Access Layer
+ * @{
+ */
+
+/** TSI - Register Layout Typedef */
+typedef struct {
+ __IO uint32_t GENCS; /**< General Control and Status Register, offset: 0x0 */
+ __IO uint32_t SCANC; /**< SCAN Control Register, offset: 0x4 */
+ __IO uint32_t PEN; /**< Pin Enable Register, offset: 0x8 */
+ __I uint32_t WUCNTR; /**< Wake-Up Channel Counter Register, offset: 0xC */
+ uint8_t RESERVED_0[240];
+ __I uint32_t CNTR1; /**< Counter Register, offset: 0x100 */
+ __I uint32_t CNTR3; /**< Counter Register, offset: 0x104 */
+ __I uint32_t CNTR5; /**< Counter Register, offset: 0x108 */
+ __I uint32_t CNTR7; /**< Counter Register, offset: 0x10C */
+ __I uint32_t CNTR9; /**< Counter Register, offset: 0x110 */
+ __I uint32_t CNTR11; /**< Counter Register, offset: 0x114 */
+ __I uint32_t CNTR13; /**< Counter Register, offset: 0x118 */
+ __I uint32_t CNTR15; /**< Counter Register, offset: 0x11C */
+ __IO uint32_t THRESHOLD; /**< Low Power Channel Threshold Register, offset: 0x120 */
+} TSI_Type;
+
+/* ----------------------------------------------------------------------------
+ -- TSI Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup TSI_Register_Masks TSI Register Masks
+ * @{
+ */
+
+/* GENCS Bit Fields */
+#define TSI_GENCS_STPE_MASK 0x1u
+#define TSI_GENCS_STPE_SHIFT 0
+#define TSI_GENCS_STM_MASK 0x2u
+#define TSI_GENCS_STM_SHIFT 1
+#define TSI_GENCS_ESOR_MASK 0x10u
+#define TSI_GENCS_ESOR_SHIFT 4
+#define TSI_GENCS_ERIE_MASK 0x20u
+#define TSI_GENCS_ERIE_SHIFT 5
+#define TSI_GENCS_TSIIE_MASK 0x40u
+#define TSI_GENCS_TSIIE_SHIFT 6
+#define TSI_GENCS_TSIEN_MASK 0x80u
+#define TSI_GENCS_TSIEN_SHIFT 7
+#define TSI_GENCS_SWTS_MASK 0x100u
+#define TSI_GENCS_SWTS_SHIFT 8
+#define TSI_GENCS_SCNIP_MASK 0x200u
+#define TSI_GENCS_SCNIP_SHIFT 9
+#define TSI_GENCS_OVRF_MASK 0x1000u
+#define TSI_GENCS_OVRF_SHIFT 12
+#define TSI_GENCS_EXTERF_MASK 0x2000u
+#define TSI_GENCS_EXTERF_SHIFT 13
+#define TSI_GENCS_OUTRGF_MASK 0x4000u
+#define TSI_GENCS_OUTRGF_SHIFT 14
+#define TSI_GENCS_EOSF_MASK 0x8000u
+#define TSI_GENCS_EOSF_SHIFT 15
+#define TSI_GENCS_PS_MASK 0x70000u
+#define TSI_GENCS_PS_SHIFT 16
+#define TSI_GENCS_PS(x) (((uint32_t)(((uint32_t)(x))<<TSI_GENCS_PS_SHIFT))&TSI_GENCS_PS_MASK)
+#define TSI_GENCS_NSCN_MASK 0xF80000u
+#define TSI_GENCS_NSCN_SHIFT 19
+#define TSI_GENCS_NSCN(x) (((uint32_t)(((uint32_t)(x))<<TSI_GENCS_NSCN_SHIFT))&TSI_GENCS_NSCN_MASK)
+#define TSI_GENCS_LPSCNITV_MASK 0xF000000u
+#define TSI_GENCS_LPSCNITV_SHIFT 24
+#define TSI_GENCS_LPSCNITV(x) (((uint32_t)(((uint32_t)(x))<<TSI_GENCS_LPSCNITV_SHIFT))&TSI_GENCS_LPSCNITV_MASK)
+#define TSI_GENCS_LPCLKS_MASK 0x10000000u
+#define TSI_GENCS_LPCLKS_SHIFT 28
+/* SCANC Bit Fields */
+#define TSI_SCANC_AMPSC_MASK 0x7u
+#define TSI_SCANC_AMPSC_SHIFT 0
+#define TSI_SCANC_AMPSC(x) (((uint32_t)(((uint32_t)(x))<<TSI_SCANC_AMPSC_SHIFT))&TSI_SCANC_AMPSC_MASK)
+#define TSI_SCANC_AMCLKS_MASK 0x18u
+#define TSI_SCANC_AMCLKS_SHIFT 3
+#define TSI_SCANC_AMCLKS(x) (((uint32_t)(((uint32_t)(x))<<TSI_SCANC_AMCLKS_SHIFT))&TSI_SCANC_AMCLKS_MASK)
+#define TSI_SCANC_SMOD_MASK 0xFF00u
+#define TSI_SCANC_SMOD_SHIFT 8
+#define TSI_SCANC_SMOD(x) (((uint32_t)(((uint32_t)(x))<<TSI_SCANC_SMOD_SHIFT))&TSI_SCANC_SMOD_MASK)
+#define TSI_SCANC_EXTCHRG_MASK 0xF0000u
+#define TSI_SCANC_EXTCHRG_SHIFT 16
+#define TSI_SCANC_EXTCHRG(x) (((uint32_t)(((uint32_t)(x))<<TSI_SCANC_EXTCHRG_SHIFT))&TSI_SCANC_EXTCHRG_MASK)
+#define TSI_SCANC_REFCHRG_MASK 0xF000000u
+#define TSI_SCANC_REFCHRG_SHIFT 24
+#define TSI_SCANC_REFCHRG(x) (((uint32_t)(((uint32_t)(x))<<TSI_SCANC_REFCHRG_SHIFT))&TSI_SCANC_REFCHRG_MASK)
+/* PEN Bit Fields */
+#define TSI_PEN_PEN0_MASK 0x1u
+#define TSI_PEN_PEN0_SHIFT 0
+#define TSI_PEN_PEN1_MASK 0x2u
+#define TSI_PEN_PEN1_SHIFT 1
+#define TSI_PEN_PEN2_MASK 0x4u
+#define TSI_PEN_PEN2_SHIFT 2
+#define TSI_PEN_PEN3_MASK 0x8u
+#define TSI_PEN_PEN3_SHIFT 3
+#define TSI_PEN_PEN4_MASK 0x10u
+#define TSI_PEN_PEN4_SHIFT 4
+#define TSI_PEN_PEN5_MASK 0x20u
+#define TSI_PEN_PEN5_SHIFT 5
+#define TSI_PEN_PEN6_MASK 0x40u
+#define TSI_PEN_PEN6_SHIFT 6
+#define TSI_PEN_PEN7_MASK 0x80u
+#define TSI_PEN_PEN7_SHIFT 7
+#define TSI_PEN_PEN8_MASK 0x100u
+#define TSI_PEN_PEN8_SHIFT 8
+#define TSI_PEN_PEN9_MASK 0x200u
+#define TSI_PEN_PEN9_SHIFT 9
+#define TSI_PEN_PEN10_MASK 0x400u
+#define TSI_PEN_PEN10_SHIFT 10
+#define TSI_PEN_PEN11_MASK 0x800u
+#define TSI_PEN_PEN11_SHIFT 11
+#define TSI_PEN_PEN12_MASK 0x1000u
+#define TSI_PEN_PEN12_SHIFT 12
+#define TSI_PEN_PEN13_MASK 0x2000u
+#define TSI_PEN_PEN13_SHIFT 13
+#define TSI_PEN_PEN14_MASK 0x4000u
+#define TSI_PEN_PEN14_SHIFT 14
+#define TSI_PEN_PEN15_MASK 0x8000u
+#define TSI_PEN_PEN15_SHIFT 15
+#define TSI_PEN_LPSP_MASK 0xF0000u
+#define TSI_PEN_LPSP_SHIFT 16
+#define TSI_PEN_LPSP(x) (((uint32_t)(((uint32_t)(x))<<TSI_PEN_LPSP_SHIFT))&TSI_PEN_LPSP_MASK)
+/* WUCNTR Bit Fields */
+#define TSI_WUCNTR_WUCNT_MASK 0xFFFFu
+#define TSI_WUCNTR_WUCNT_SHIFT 0
+#define TSI_WUCNTR_WUCNT(x) (((uint32_t)(((uint32_t)(x))<<TSI_WUCNTR_WUCNT_SHIFT))&TSI_WUCNTR_WUCNT_MASK)
+/* CNTR1 Bit Fields */
+#define TSI_CNTR1_CTN1_MASK 0xFFFFu
+#define TSI_CNTR1_CTN1_SHIFT 0
+#define TSI_CNTR1_CTN1(x) (((uint32_t)(((uint32_t)(x))<<TSI_CNTR1_CTN1_SHIFT))&TSI_CNTR1_CTN1_MASK)
+#define TSI_CNTR1_CTN_MASK 0xFFFF0000u
+#define TSI_CNTR1_CTN_SHIFT 16
+#define TSI_CNTR1_CTN(x) (((uint32_t)(((uint32_t)(x))<<TSI_CNTR1_CTN_SHIFT))&TSI_CNTR1_CTN_MASK)
+/* CNTR3 Bit Fields */
+#define TSI_CNTR3_CTN1_MASK 0xFFFFu
+#define TSI_CNTR3_CTN1_SHIFT 0
+#define TSI_CNTR3_CTN1(x) (((uint32_t)(((uint32_t)(x))<<TSI_CNTR3_CTN1_SHIFT))&TSI_CNTR3_CTN1_MASK)
+#define TSI_CNTR3_CTN_MASK 0xFFFF0000u
+#define TSI_CNTR3_CTN_SHIFT 16
+#define TSI_CNTR3_CTN(x) (((uint32_t)(((uint32_t)(x))<<TSI_CNTR3_CTN_SHIFT))&TSI_CNTR3_CTN_MASK)
+/* CNTR5 Bit Fields */
+#define TSI_CNTR5_CTN1_MASK 0xFFFFu
+#define TSI_CNTR5_CTN1_SHIFT 0
+#define TSI_CNTR5_CTN1(x) (((uint32_t)(((uint32_t)(x))<<TSI_CNTR5_CTN1_SHIFT))&TSI_CNTR5_CTN1_MASK)
+#define TSI_CNTR5_CTN_MASK 0xFFFF0000u
+#define TSI_CNTR5_CTN_SHIFT 16
+#define TSI_CNTR5_CTN(x) (((uint32_t)(((uint32_t)(x))<<TSI_CNTR5_CTN_SHIFT))&TSI_CNTR5_CTN_MASK)
+/* CNTR7 Bit Fields */
+#define TSI_CNTR7_CTN1_MASK 0xFFFFu
+#define TSI_CNTR7_CTN1_SHIFT 0
+#define TSI_CNTR7_CTN1(x) (((uint32_t)(((uint32_t)(x))<<TSI_CNTR7_CTN1_SHIFT))&TSI_CNTR7_CTN1_MASK)
+#define TSI_CNTR7_CTN_MASK 0xFFFF0000u
+#define TSI_CNTR7_CTN_SHIFT 16
+#define TSI_CNTR7_CTN(x) (((uint32_t)(((uint32_t)(x))<<TSI_CNTR7_CTN_SHIFT))&TSI_CNTR7_CTN_MASK)
+/* CNTR9 Bit Fields */
+#define TSI_CNTR9_CTN1_MASK 0xFFFFu
+#define TSI_CNTR9_CTN1_SHIFT 0
+#define TSI_CNTR9_CTN1(x) (((uint32_t)(((uint32_t)(x))<<TSI_CNTR9_CTN1_SHIFT))&TSI_CNTR9_CTN1_MASK)
+#define TSI_CNTR9_CTN_MASK 0xFFFF0000u
+#define TSI_CNTR9_CTN_SHIFT 16
+#define TSI_CNTR9_CTN(x) (((uint32_t)(((uint32_t)(x))<<TSI_CNTR9_CTN_SHIFT))&TSI_CNTR9_CTN_MASK)
+/* CNTR11 Bit Fields */
+#define TSI_CNTR11_CTN1_MASK 0xFFFFu
+#define TSI_CNTR11_CTN1_SHIFT 0
+#define TSI_CNTR11_CTN1(x) (((uint32_t)(((uint32_t)(x))<<TSI_CNTR11_CTN1_SHIFT))&TSI_CNTR11_CTN1_MASK)
+#define TSI_CNTR11_CTN_MASK 0xFFFF0000u
+#define TSI_CNTR11_CTN_SHIFT 16
+#define TSI_CNTR11_CTN(x) (((uint32_t)(((uint32_t)(x))<<TSI_CNTR11_CTN_SHIFT))&TSI_CNTR11_CTN_MASK)
+/* CNTR13 Bit Fields */
+#define TSI_CNTR13_CTN1_MASK 0xFFFFu
+#define TSI_CNTR13_CTN1_SHIFT 0
+#define TSI_CNTR13_CTN1(x) (((uint32_t)(((uint32_t)(x))<<TSI_CNTR13_CTN1_SHIFT))&TSI_CNTR13_CTN1_MASK)
+#define TSI_CNTR13_CTN_MASK 0xFFFF0000u
+#define TSI_CNTR13_CTN_SHIFT 16
+#define TSI_CNTR13_CTN(x) (((uint32_t)(((uint32_t)(x))<<TSI_CNTR13_CTN_SHIFT))&TSI_CNTR13_CTN_MASK)
+/* CNTR15 Bit Fields */
+#define TSI_CNTR15_CTN1_MASK 0xFFFFu
+#define TSI_CNTR15_CTN1_SHIFT 0
+#define TSI_CNTR15_CTN1(x) (((uint32_t)(((uint32_t)(x))<<TSI_CNTR15_CTN1_SHIFT))&TSI_CNTR15_CTN1_MASK)
+#define TSI_CNTR15_CTN_MASK 0xFFFF0000u
+#define TSI_CNTR15_CTN_SHIFT 16
+#define TSI_CNTR15_CTN(x) (((uint32_t)(((uint32_t)(x))<<TSI_CNTR15_CTN_SHIFT))&TSI_CNTR15_CTN_MASK)
+/* THRESHOLD Bit Fields */
+#define TSI_THRESHOLD_HTHH_MASK 0xFFFFu
+#define TSI_THRESHOLD_HTHH_SHIFT 0
+#define TSI_THRESHOLD_HTHH(x) (((uint32_t)(((uint32_t)(x))<<TSI_THRESHOLD_HTHH_SHIFT))&TSI_THRESHOLD_HTHH_MASK)
+#define TSI_THRESHOLD_LTHH_MASK 0xFFFF0000u
+#define TSI_THRESHOLD_LTHH_SHIFT 16
+#define TSI_THRESHOLD_LTHH(x) (((uint32_t)(((uint32_t)(x))<<TSI_THRESHOLD_LTHH_SHIFT))&TSI_THRESHOLD_LTHH_MASK)
+
+/**
+ * @}
+ */ /* end of group TSI_Register_Masks */
+
+
+/* TSI - Peripheral instance base addresses */
+/** Peripheral TSI0 base address */
+#define TSI0_BASE (0x40045000u)
+/** Peripheral TSI0 base pointer */
+#define TSI0 ((TSI_Type *)TSI0_BASE)
+
+/**
+ * @}
+ */ /* end of group TSI_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- UART Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup UART_Peripheral_Access_Layer UART Peripheral Access Layer
+ * @{
+ */
+
+/** UART - Register Layout Typedef */
+typedef struct {
+ __IO uint8_t BDH; /**< UART Baud Rate Registers:High, offset: 0x0 */
+ __IO uint8_t BDL; /**< UART Baud Rate Registers: Low, offset: 0x1 */
+ __IO uint8_t C1; /**< UART Control Register 1, offset: 0x2 */
+ __IO uint8_t C2; /**< UART Control Register 2, offset: 0x3 */
+ __I uint8_t S1; /**< UART Status Register 1, offset: 0x4 */
+ __IO uint8_t S2; /**< UART Status Register 2, offset: 0x5 */
+ __IO uint8_t C3; /**< UART Control Register 3, offset: 0x6 */
+ __IO uint8_t D; /**< UART Data Register, offset: 0x7 */
+ __IO uint8_t MA1; /**< UART Match Address Registers 1, offset: 0x8 */
+ __IO uint8_t MA2; /**< UART Match Address Registers 2, offset: 0x9 */
+ __IO uint8_t C4; /**< UART Control Register 4, offset: 0xA */
+ __IO uint8_t C5; /**< UART Control Register 5, offset: 0xB */
+ __I uint8_t ED; /**< UART Extended Data Register, offset: 0xC */
+ __IO uint8_t MODEM; /**< UART Modem Register, offset: 0xD */
+ __IO uint8_t IR; /**< UART Infrared Register, offset: 0xE */
+ uint8_t RESERVED_0[1];
+ __IO uint8_t PFIFO; /**< UART FIFO Parameters, offset: 0x10 */
+ __IO uint8_t CFIFO; /**< UART FIFO Control Register, offset: 0x11 */
+ __IO uint8_t SFIFO; /**< UART FIFO Status Register, offset: 0x12 */
+ __IO uint8_t TWFIFO; /**< UART FIFO Transmit Watermark, offset: 0x13 */
+ __I uint8_t TCFIFO; /**< UART FIFO Transmit Count, offset: 0x14 */
+ __IO uint8_t RWFIFO; /**< UART FIFO Receive Watermark, offset: 0x15 */
+ __I uint8_t RCFIFO; /**< UART FIFO Receive Count, offset: 0x16 */
+ uint8_t RESERVED_1[1];
+ __IO uint8_t C7816; /**< UART 7816 Control Register, offset: 0x18 */
+ __IO uint8_t IE7816; /**< UART 7816 Interrupt Enable Register, offset: 0x19 */
+ __IO uint8_t IS7816; /**< UART 7816 Interrupt Status Register, offset: 0x1A */
+ union { /* offset: 0x1B */
+ __IO uint8_t WP7816_T_TYPE0; /**< UART 7816 Wait Parameter Register, offset: 0x1B */
+ __IO uint8_t WP7816_T_TYPE1; /**< UART 7816 Wait Parameter Register, offset: 0x1B */
+ };
+ __IO uint8_t WN7816; /**< UART 7816 Wait N Register, offset: 0x1C */
+ __IO uint8_t WF7816; /**< UART 7816 Wait FD Register, offset: 0x1D */
+ __IO uint8_t ET7816; /**< UART 7816 Error Threshold Register, offset: 0x1E */
+ __IO uint8_t TL7816; /**< UART 7816 Transmit Length Register, offset: 0x1F */
+ uint8_t RESERVED_2[1];
+ __IO uint8_t C6; /**< UART CEA709.1-B Control Register 6, offset: 0x21 */
+ __IO uint8_t PCTH; /**< UART CEA709.1-B Packet Cycle Time Counter High, offset: 0x22 */
+ __IO uint8_t PCTL; /**< UART CEA709.1-B Packet Cycle Time Counter Low, offset: 0x23 */
+ __IO uint8_t B1T; /**< UART CEA709.1-B Beta1 Timer, offset: 0x24 */
+ __IO uint8_t SDTH; /**< UART CEA709.1-B Secondary Delay Timer High, offset: 0x25 */
+ __IO uint8_t SDTL; /**< UART CEA709.1-B Secondary Delay Timer Low, offset: 0x26 */
+ __IO uint8_t PRE; /**< UART CEA709.1-B Preamble, offset: 0x27 */
+ __IO uint8_t TPL; /**< UART CEA709.1-B Transmit Packet Length, offset: 0x28 */
+ __IO uint8_t IE; /**< UART CEA709.1-B Interrupt Enable Register, offset: 0x29 */
+ __IO uint8_t WB; /**< UART CEA709.1-B WBASE, offset: 0x2A */
+ __IO uint8_t S3; /**< UART CEA709.1-B Status Register, offset: 0x2B */
+ __IO uint8_t S4; /**< UART CEA709.1-B Status Register, offset: 0x2C */
+ __I uint8_t RPL; /**< UART CEA709.1-B Received Packet Length, offset: 0x2D */
+ __I uint8_t RPREL; /**< UART CEA709.1-B Received Preamble Length, offset: 0x2E */
+ __IO uint8_t CPW; /**< UART CEA709.1-B Collision Pulse Width, offset: 0x2F */
+ __IO uint8_t RIDT; /**< UART CEA709.1-B Receive Indeterminate Time, offset: 0x30 */
+ __IO uint8_t TIDT; /**< UART CEA709.1-B Transmit Indeterminate Time, offset: 0x31 */
+} UART_Type;
+
+/* ----------------------------------------------------------------------------
+ -- UART Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup UART_Register_Masks UART Register Masks
+ * @{
+ */
+
+/* BDH Bit Fields */
+#define UART_BDH_SBR_MASK 0x1Fu
+#define UART_BDH_SBR_SHIFT 0
+#define UART_BDH_SBR(x) (((uint8_t)(((uint8_t)(x))<<UART_BDH_SBR_SHIFT))&UART_BDH_SBR_MASK)
+#define UART_BDH_RXEDGIE_MASK 0x40u
+#define UART_BDH_RXEDGIE_SHIFT 6
+#define UART_BDH_LBKDIE_MASK 0x80u
+#define UART_BDH_LBKDIE_SHIFT 7
+/* BDL Bit Fields */
+#define UART_BDL_SBR_MASK 0xFFu
+#define UART_BDL_SBR_SHIFT 0
+#define UART_BDL_SBR(x) (((uint8_t)(((uint8_t)(x))<<UART_BDL_SBR_SHIFT))&UART_BDL_SBR_MASK)
+/* C1 Bit Fields */
+#define UART_C1_PT_MASK 0x1u
+#define UART_C1_PT_SHIFT 0
+#define UART_C1_PE_MASK 0x2u
+#define UART_C1_PE_SHIFT 1
+#define UART_C1_ILT_MASK 0x4u
+#define UART_C1_ILT_SHIFT 2
+#define UART_C1_WAKE_MASK 0x8u
+#define UART_C1_WAKE_SHIFT 3
+#define UART_C1_M_MASK 0x10u
+#define UART_C1_M_SHIFT 4
+#define UART_C1_RSRC_MASK 0x20u
+#define UART_C1_RSRC_SHIFT 5
+#define UART_C1_UARTSWAI_MASK 0x40u
+#define UART_C1_UARTSWAI_SHIFT 6
+#define UART_C1_LOOPS_MASK 0x80u
+#define UART_C1_LOOPS_SHIFT 7
+/* C2 Bit Fields */
+#define UART_C2_SBK_MASK 0x1u
+#define UART_C2_SBK_SHIFT 0
+#define UART_C2_RWU_MASK 0x2u
+#define UART_C2_RWU_SHIFT 1
+#define UART_C2_RE_MASK 0x4u
+#define UART_C2_RE_SHIFT 2
+#define UART_C2_TE_MASK 0x8u
+#define UART_C2_TE_SHIFT 3
+#define UART_C2_ILIE_MASK 0x10u
+#define UART_C2_ILIE_SHIFT 4
+#define UART_C2_RIE_MASK 0x20u
+#define UART_C2_RIE_SHIFT 5
+#define UART_C2_TCIE_MASK 0x40u
+#define UART_C2_TCIE_SHIFT 6
+#define UART_C2_TIE_MASK 0x80u
+#define UART_C2_TIE_SHIFT 7
+/* S1 Bit Fields */
+#define UART_S1_PF_MASK 0x1u
+#define UART_S1_PF_SHIFT 0
+#define UART_S1_FE_MASK 0x2u
+#define UART_S1_FE_SHIFT 1
+#define UART_S1_NF_MASK 0x4u
+#define UART_S1_NF_SHIFT 2
+#define UART_S1_OR_MASK 0x8u
+#define UART_S1_OR_SHIFT 3
+#define UART_S1_IDLE_MASK 0x10u
+#define UART_S1_IDLE_SHIFT 4
+#define UART_S1_RDRF_MASK 0x20u
+#define UART_S1_RDRF_SHIFT 5
+#define UART_S1_TC_MASK 0x40u
+#define UART_S1_TC_SHIFT 6
+#define UART_S1_TDRE_MASK 0x80u
+#define UART_S1_TDRE_SHIFT 7
+/* S2 Bit Fields */
+#define UART_S2_RAF_MASK 0x1u
+#define UART_S2_RAF_SHIFT 0
+#define UART_S2_LBKDE_MASK 0x2u
+#define UART_S2_LBKDE_SHIFT 1
+#define UART_S2_BRK13_MASK 0x4u
+#define UART_S2_BRK13_SHIFT 2
+#define UART_S2_RWUID_MASK 0x8u
+#define UART_S2_RWUID_SHIFT 3
+#define UART_S2_RXINV_MASK 0x10u
+#define UART_S2_RXINV_SHIFT 4
+#define UART_S2_MSBF_MASK 0x20u
+#define UART_S2_MSBF_SHIFT 5
+#define UART_S2_RXEDGIF_MASK 0x40u
+#define UART_S2_RXEDGIF_SHIFT 6
+#define UART_S2_LBKDIF_MASK 0x80u
+#define UART_S2_LBKDIF_SHIFT 7
+/* C3 Bit Fields */
+#define UART_C3_PEIE_MASK 0x1u
+#define UART_C3_PEIE_SHIFT 0
+#define UART_C3_FEIE_MASK 0x2u
+#define UART_C3_FEIE_SHIFT 1
+#define UART_C3_NEIE_MASK 0x4u
+#define UART_C3_NEIE_SHIFT 2
+#define UART_C3_ORIE_MASK 0x8u
+#define UART_C3_ORIE_SHIFT 3
+#define UART_C3_TXINV_MASK 0x10u
+#define UART_C3_TXINV_SHIFT 4
+#define UART_C3_TXDIR_MASK 0x20u
+#define UART_C3_TXDIR_SHIFT 5
+#define UART_C3_T8_MASK 0x40u
+#define UART_C3_T8_SHIFT 6
+#define UART_C3_R8_MASK 0x80u
+#define UART_C3_R8_SHIFT 7
+/* D Bit Fields */
+#define UART_D_RT_MASK 0xFFu
+#define UART_D_RT_SHIFT 0
+#define UART_D_RT(x) (((uint8_t)(((uint8_t)(x))<<UART_D_RT_SHIFT))&UART_D_RT_MASK)
+/* MA1 Bit Fields */
+#define UART_MA1_MA_MASK 0xFFu
+#define UART_MA1_MA_SHIFT 0
+#define UART_MA1_MA(x) (((uint8_t)(((uint8_t)(x))<<UART_MA1_MA_SHIFT))&UART_MA1_MA_MASK)
+/* MA2 Bit Fields */
+#define UART_MA2_MA_MASK 0xFFu
+#define UART_MA2_MA_SHIFT 0
+#define UART_MA2_MA(x) (((uint8_t)(((uint8_t)(x))<<UART_MA2_MA_SHIFT))&UART_MA2_MA_MASK)
+/* C4 Bit Fields */
+#define UART_C4_BRFA_MASK 0x1Fu
+#define UART_C4_BRFA_SHIFT 0
+#define UART_C4_BRFA(x) (((uint8_t)(((uint8_t)(x))<<UART_C4_BRFA_SHIFT))&UART_C4_BRFA_MASK)
+#define UART_C4_M10_MASK 0x20u
+#define UART_C4_M10_SHIFT 5
+#define UART_C4_MAEN2_MASK 0x40u
+#define UART_C4_MAEN2_SHIFT 6
+#define UART_C4_MAEN1_MASK 0x80u
+#define UART_C4_MAEN1_SHIFT 7
+/* C5 Bit Fields */
+#define UART_C5_RDMAS_MASK 0x20u
+#define UART_C5_RDMAS_SHIFT 5
+#define UART_C5_TDMAS_MASK 0x80u
+#define UART_C5_TDMAS_SHIFT 7
+/* ED Bit Fields */
+#define UART_ED_PARITYE_MASK 0x40u
+#define UART_ED_PARITYE_SHIFT 6
+#define UART_ED_NOISY_MASK 0x80u
+#define UART_ED_NOISY_SHIFT 7
+/* MODEM Bit Fields */
+#define UART_MODEM_TXCTSE_MASK 0x1u
+#define UART_MODEM_TXCTSE_SHIFT 0
+#define UART_MODEM_TXRTSE_MASK 0x2u
+#define UART_MODEM_TXRTSE_SHIFT 1
+#define UART_MODEM_TXRTSPOL_MASK 0x4u
+#define UART_MODEM_TXRTSPOL_SHIFT 2
+#define UART_MODEM_RXRTSE_MASK 0x8u
+#define UART_MODEM_RXRTSE_SHIFT 3
+/* IR Bit Fields */
+#define UART_IR_TNP_MASK 0x3u
+#define UART_IR_TNP_SHIFT 0
+#define UART_IR_TNP(x) (((uint8_t)(((uint8_t)(x))<<UART_IR_TNP_SHIFT))&UART_IR_TNP_MASK)
+#define UART_IR_IREN_MASK 0x4u
+#define UART_IR_IREN_SHIFT 2
+/* PFIFO Bit Fields */
+#define UART_PFIFO_RXFIFOSIZE_MASK 0x7u
+#define UART_PFIFO_RXFIFOSIZE_SHIFT 0
+#define UART_PFIFO_RXFIFOSIZE(x) (((uint8_t)(((uint8_t)(x))<<UART_PFIFO_RXFIFOSIZE_SHIFT))&UART_PFIFO_RXFIFOSIZE_MASK)
+#define UART_PFIFO_RXFE_MASK 0x8u
+#define UART_PFIFO_RXFE_SHIFT 3
+#define UART_PFIFO_TXFIFOSIZE_MASK 0x70u
+#define UART_PFIFO_TXFIFOSIZE_SHIFT 4
+#define UART_PFIFO_TXFIFOSIZE(x) (((uint8_t)(((uint8_t)(x))<<UART_PFIFO_TXFIFOSIZE_SHIFT))&UART_PFIFO_TXFIFOSIZE_MASK)
+#define UART_PFIFO_TXFE_MASK 0x80u
+#define UART_PFIFO_TXFE_SHIFT 7
+/* CFIFO Bit Fields */
+#define UART_CFIFO_RXUFE_MASK 0x1u
+#define UART_CFIFO_RXUFE_SHIFT 0
+#define UART_CFIFO_TXOFE_MASK 0x2u
+#define UART_CFIFO_TXOFE_SHIFT 1
+#define UART_CFIFO_RXFLUSH_MASK 0x40u
+#define UART_CFIFO_RXFLUSH_SHIFT 6
+#define UART_CFIFO_TXFLUSH_MASK 0x80u
+#define UART_CFIFO_TXFLUSH_SHIFT 7
+/* SFIFO Bit Fields */
+#define UART_SFIFO_RXUF_MASK 0x1u
+#define UART_SFIFO_RXUF_SHIFT 0
+#define UART_SFIFO_TXOF_MASK 0x2u
+#define UART_SFIFO_TXOF_SHIFT 1
+#define UART_SFIFO_RXEMPT_MASK 0x40u
+#define UART_SFIFO_RXEMPT_SHIFT 6
+#define UART_SFIFO_TXEMPT_MASK 0x80u
+#define UART_SFIFO_TXEMPT_SHIFT 7
+/* TWFIFO Bit Fields */
+#define UART_TWFIFO_TXWATER_MASK 0xFFu
+#define UART_TWFIFO_TXWATER_SHIFT 0
+#define UART_TWFIFO_TXWATER(x) (((uint8_t)(((uint8_t)(x))<<UART_TWFIFO_TXWATER_SHIFT))&UART_TWFIFO_TXWATER_MASK)
+/* TCFIFO Bit Fields */
+#define UART_TCFIFO_TXCOUNT_MASK 0xFFu
+#define UART_TCFIFO_TXCOUNT_SHIFT 0
+#define UART_TCFIFO_TXCOUNT(x) (((uint8_t)(((uint8_t)(x))<<UART_TCFIFO_TXCOUNT_SHIFT))&UART_TCFIFO_TXCOUNT_MASK)
+/* RWFIFO Bit Fields */
+#define UART_RWFIFO_RXWATER_MASK 0xFFu
+#define UART_RWFIFO_RXWATER_SHIFT 0
+#define UART_RWFIFO_RXWATER(x) (((uint8_t)(((uint8_t)(x))<<UART_RWFIFO_RXWATER_SHIFT))&UART_RWFIFO_RXWATER_MASK)
+/* RCFIFO Bit Fields */
+#define UART_RCFIFO_RXCOUNT_MASK 0xFFu
+#define UART_RCFIFO_RXCOUNT_SHIFT 0
+#define UART_RCFIFO_RXCOUNT(x) (((uint8_t)(((uint8_t)(x))<<UART_RCFIFO_RXCOUNT_SHIFT))&UART_RCFIFO_RXCOUNT_MASK)
+/* C7816 Bit Fields */
+#define UART_C7816_ISO_7816E_MASK 0x1u
+#define UART_C7816_ISO_7816E_SHIFT 0
+#define UART_C7816_TTYPE_MASK 0x2u
+#define UART_C7816_TTYPE_SHIFT 1
+#define UART_C7816_INIT_MASK 0x4u
+#define UART_C7816_INIT_SHIFT 2
+#define UART_C7816_ANACK_MASK 0x8u
+#define UART_C7816_ANACK_SHIFT 3
+#define UART_C7816_ONACK_MASK 0x10u
+#define UART_C7816_ONACK_SHIFT 4
+/* IE7816 Bit Fields */
+#define UART_IE7816_RXTE_MASK 0x1u
+#define UART_IE7816_RXTE_SHIFT 0
+#define UART_IE7816_TXTE_MASK 0x2u
+#define UART_IE7816_TXTE_SHIFT 1
+#define UART_IE7816_GTVE_MASK 0x4u
+#define UART_IE7816_GTVE_SHIFT 2
+#define UART_IE7816_INITDE_MASK 0x10u
+#define UART_IE7816_INITDE_SHIFT 4
+#define UART_IE7816_BWTE_MASK 0x20u
+#define UART_IE7816_BWTE_SHIFT 5
+#define UART_IE7816_CWTE_MASK 0x40u
+#define UART_IE7816_CWTE_SHIFT 6
+#define UART_IE7816_WTE_MASK 0x80u
+#define UART_IE7816_WTE_SHIFT 7
+/* IS7816 Bit Fields */
+#define UART_IS7816_RXT_MASK 0x1u
+#define UART_IS7816_RXT_SHIFT 0
+#define UART_IS7816_TXT_MASK 0x2u
+#define UART_IS7816_TXT_SHIFT 1
+#define UART_IS7816_GTV_MASK 0x4u
+#define UART_IS7816_GTV_SHIFT 2
+#define UART_IS7816_INITD_MASK 0x10u
+#define UART_IS7816_INITD_SHIFT 4
+#define UART_IS7816_BWT_MASK 0x20u
+#define UART_IS7816_BWT_SHIFT 5
+#define UART_IS7816_CWT_MASK 0x40u
+#define UART_IS7816_CWT_SHIFT 6
+#define UART_IS7816_WT_MASK 0x80u
+#define UART_IS7816_WT_SHIFT 7
+/* WP7816_T_TYPE0 Bit Fields */
+#define UART_WP7816_T_TYPE0_WI_MASK 0xFFu
+#define UART_WP7816_T_TYPE0_WI_SHIFT 0
+#define UART_WP7816_T_TYPE0_WI(x) (((uint8_t)(((uint8_t)(x))<<UART_WP7816_T_TYPE0_WI_SHIFT))&UART_WP7816_T_TYPE0_WI_MASK)
+/* WP7816_T_TYPE1 Bit Fields */
+#define UART_WP7816_T_TYPE1_BWI_MASK 0xFu
+#define UART_WP7816_T_TYPE1_BWI_SHIFT 0
+#define UART_WP7816_T_TYPE1_BWI(x) (((uint8_t)(((uint8_t)(x))<<UART_WP7816_T_TYPE1_BWI_SHIFT))&UART_WP7816_T_TYPE1_BWI_MASK)
+#define UART_WP7816_T_TYPE1_CWI_MASK 0xF0u
+#define UART_WP7816_T_TYPE1_CWI_SHIFT 4
+#define UART_WP7816_T_TYPE1_CWI(x) (((uint8_t)(((uint8_t)(x))<<UART_WP7816_T_TYPE1_CWI_SHIFT))&UART_WP7816_T_TYPE1_CWI_MASK)
+/* WN7816 Bit Fields */
+#define UART_WN7816_GTN_MASK 0xFFu
+#define UART_WN7816_GTN_SHIFT 0
+#define UART_WN7816_GTN(x) (((uint8_t)(((uint8_t)(x))<<UART_WN7816_GTN_SHIFT))&UART_WN7816_GTN_MASK)
+/* WF7816 Bit Fields */
+#define UART_WF7816_GTFD_MASK 0xFFu
+#define UART_WF7816_GTFD_SHIFT 0
+#define UART_WF7816_GTFD(x) (((uint8_t)(((uint8_t)(x))<<UART_WF7816_GTFD_SHIFT))&UART_WF7816_GTFD_MASK)
+/* ET7816 Bit Fields */
+#define UART_ET7816_RXTHRESHOLD_MASK 0xFu
+#define UART_ET7816_RXTHRESHOLD_SHIFT 0
+#define UART_ET7816_RXTHRESHOLD(x) (((uint8_t)(((uint8_t)(x))<<UART_ET7816_RXTHRESHOLD_SHIFT))&UART_ET7816_RXTHRESHOLD_MASK)
+#define UART_ET7816_TXTHRESHOLD_MASK 0xF0u
+#define UART_ET7816_TXTHRESHOLD_SHIFT 4
+#define UART_ET7816_TXTHRESHOLD(x) (((uint8_t)(((uint8_t)(x))<<UART_ET7816_TXTHRESHOLD_SHIFT))&UART_ET7816_TXTHRESHOLD_MASK)
+/* TL7816 Bit Fields */
+#define UART_TL7816_TLEN_MASK 0xFFu
+#define UART_TL7816_TLEN_SHIFT 0
+#define UART_TL7816_TLEN(x) (((uint8_t)(((uint8_t)(x))<<UART_TL7816_TLEN_SHIFT))&UART_TL7816_TLEN_MASK)
+/* C6 Bit Fields */
+#define UART_C6_CP_MASK 0x10u
+#define UART_C6_CP_SHIFT 4
+#define UART_C6_CE_MASK 0x20u
+#define UART_C6_CE_SHIFT 5
+#define UART_C6_TX709_MASK 0x40u
+#define UART_C6_TX709_SHIFT 6
+#define UART_C6_EN709_MASK 0x80u
+#define UART_C6_EN709_SHIFT 7
+/* PCTH Bit Fields */
+#define UART_PCTH_PCTH_MASK 0xFFu
+#define UART_PCTH_PCTH_SHIFT 0
+#define UART_PCTH_PCTH(x) (((uint8_t)(((uint8_t)(x))<<UART_PCTH_PCTH_SHIFT))&UART_PCTH_PCTH_MASK)
+/* PCTL Bit Fields */
+#define UART_PCTL_PCTL_MASK 0xFFu
+#define UART_PCTL_PCTL_SHIFT 0
+#define UART_PCTL_PCTL(x) (((uint8_t)(((uint8_t)(x))<<UART_PCTL_PCTL_SHIFT))&UART_PCTL_PCTL_MASK)
+/* B1T Bit Fields */
+#define UART_B1T_B1T_MASK 0xFFu
+#define UART_B1T_B1T_SHIFT 0
+#define UART_B1T_B1T(x) (((uint8_t)(((uint8_t)(x))<<UART_B1T_B1T_SHIFT))&UART_B1T_B1T_MASK)
+/* SDTH Bit Fields */
+#define UART_SDTH_SDTH_MASK 0xFFu
+#define UART_SDTH_SDTH_SHIFT 0
+#define UART_SDTH_SDTH(x) (((uint8_t)(((uint8_t)(x))<<UART_SDTH_SDTH_SHIFT))&UART_SDTH_SDTH_MASK)
+/* SDTL Bit Fields */
+#define UART_SDTL_SDTL_MASK 0xFFu
+#define UART_SDTL_SDTL_SHIFT 0
+#define UART_SDTL_SDTL(x) (((uint8_t)(((uint8_t)(x))<<UART_SDTL_SDTL_SHIFT))&UART_SDTL_SDTL_MASK)
+/* PRE Bit Fields */
+#define UART_PRE_PREAMBLE_MASK 0xFFu
+#define UART_PRE_PREAMBLE_SHIFT 0
+#define UART_PRE_PREAMBLE(x) (((uint8_t)(((uint8_t)(x))<<UART_PRE_PREAMBLE_SHIFT))&UART_PRE_PREAMBLE_MASK)
+/* TPL Bit Fields */
+#define UART_TPL_TPL_MASK 0xFFu
+#define UART_TPL_TPL_SHIFT 0
+#define UART_TPL_TPL(x) (((uint8_t)(((uint8_t)(x))<<UART_TPL_TPL_SHIFT))&UART_TPL_TPL_MASK)
+/* IE Bit Fields */
+#define UART_IE_TXFIE_MASK 0x1u
+#define UART_IE_TXFIE_SHIFT 0
+#define UART_IE_PSIE_MASK 0x2u
+#define UART_IE_PSIE_SHIFT 1
+#define UART_IE_PCTEIE_MASK 0x4u
+#define UART_IE_PCTEIE_SHIFT 2
+#define UART_IE_PTXIE_MASK 0x8u
+#define UART_IE_PTXIE_SHIFT 3
+#define UART_IE_PRXIE_MASK 0x10u
+#define UART_IE_PRXIE_SHIFT 4
+#define UART_IE_ISDIE_MASK 0x20u
+#define UART_IE_ISDIE_SHIFT 5
+#define UART_IE_WBEIE_MASK 0x40u
+#define UART_IE_WBEIE_SHIFT 6
+/* WB Bit Fields */
+#define UART_WB_WBASE_MASK 0xFFu
+#define UART_WB_WBASE_SHIFT 0
+#define UART_WB_WBASE(x) (((uint8_t)(((uint8_t)(x))<<UART_WB_WBASE_SHIFT))&UART_WB_WBASE_MASK)
+/* S3 Bit Fields */
+#define UART_S3_TXFF_MASK 0x1u
+#define UART_S3_TXFF_SHIFT 0
+#define UART_S3_PSF_MASK 0x2u
+#define UART_S3_PSF_SHIFT 1
+#define UART_S3_PCTEF_MASK 0x4u
+#define UART_S3_PCTEF_SHIFT 2
+#define UART_S3_PTXF_MASK 0x8u
+#define UART_S3_PTXF_SHIFT 3
+#define UART_S3_PRXF_MASK 0x10u
+#define UART_S3_PRXF_SHIFT 4
+#define UART_S3_ISD_MASK 0x20u
+#define UART_S3_ISD_SHIFT 5
+#define UART_S3_WBEF_MASK 0x40u
+#define UART_S3_WBEF_SHIFT 6
+#define UART_S3_PEF_MASK 0x80u
+#define UART_S3_PEF_SHIFT 7
+/* S4 Bit Fields */
+#define UART_S4_FE_MASK 0x1u
+#define UART_S4_FE_SHIFT 0
+#define UART_S4_ILCV_MASK 0x2u
+#define UART_S4_ILCV_SHIFT 1
+#define UART_S4_CDET_MASK 0xCu
+#define UART_S4_CDET_SHIFT 2
+#define UART_S4_CDET(x) (((uint8_t)(((uint8_t)(x))<<UART_S4_CDET_SHIFT))&UART_S4_CDET_MASK)
+#define UART_S4_INITF_MASK 0x10u
+#define UART_S4_INITF_SHIFT 4
+/* RPL Bit Fields */
+#define UART_RPL_RPL_MASK 0xFFu
+#define UART_RPL_RPL_SHIFT 0
+#define UART_RPL_RPL(x) (((uint8_t)(((uint8_t)(x))<<UART_RPL_RPL_SHIFT))&UART_RPL_RPL_MASK)
+/* RPREL Bit Fields */
+#define UART_RPREL_RPREL_MASK 0xFFu
+#define UART_RPREL_RPREL_SHIFT 0
+#define UART_RPREL_RPREL(x) (((uint8_t)(((uint8_t)(x))<<UART_RPREL_RPREL_SHIFT))&UART_RPREL_RPREL_MASK)
+/* CPW Bit Fields */
+#define UART_CPW_CPW_MASK 0xFFu
+#define UART_CPW_CPW_SHIFT 0
+#define UART_CPW_CPW(x) (((uint8_t)(((uint8_t)(x))<<UART_CPW_CPW_SHIFT))&UART_CPW_CPW_MASK)
+/* RIDT Bit Fields */
+#define UART_RIDT_RIDT_MASK 0xFFu
+#define UART_RIDT_RIDT_SHIFT 0
+#define UART_RIDT_RIDT(x) (((uint8_t)(((uint8_t)(x))<<UART_RIDT_RIDT_SHIFT))&UART_RIDT_RIDT_MASK)
+/* TIDT Bit Fields */
+#define UART_TIDT_TIDT_MASK 0xFFu
+#define UART_TIDT_TIDT_SHIFT 0
+#define UART_TIDT_TIDT(x) (((uint8_t)(((uint8_t)(x))<<UART_TIDT_TIDT_SHIFT))&UART_TIDT_TIDT_MASK)
+
+/**
+ * @}
+ */ /* end of group UART_Register_Masks */
+
+
+/* UART - Peripheral instance base addresses */
+/** Peripheral UART0 base address */
+#define UART0_BASE (0x4006A000u)
+/** Peripheral UART0 base pointer */
+#define UART0 ((UART_Type *)UART0_BASE)
+/** Peripheral UART1 base address */
+#define UART1_BASE (0x4006B000u)
+/** Peripheral UART1 base pointer */
+#define UART1 ((UART_Type *)UART1_BASE)
+/** Peripheral UART2 base address */
+#define UART2_BASE (0x4006C000u)
+/** Peripheral UART2 base pointer */
+#define UART2 ((UART_Type *)UART2_BASE)
+
+/**
+ * @}
+ */ /* end of group UART_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- USB Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup USB_Peripheral_Access_Layer USB Peripheral Access Layer
+ * @{
+ */
+
+/** USB - Register Layout Typedef */
+typedef struct {
+ __I uint8_t PERID; /**< Peripheral ID Register, offset: 0x0 */
+ uint8_t RESERVED_0[3];
+ __I uint8_t IDCOMP; /**< Peripheral ID Complement Register, offset: 0x4 */
+ uint8_t RESERVED_1[3];
+ __I uint8_t REV; /**< Peripheral Revision Register, offset: 0x8 */
+ uint8_t RESERVED_2[3];
+ __I uint8_t ADDINFO; /**< Peripheral Additional Info Register, offset: 0xC */
+ uint8_t RESERVED_3[3];
+ __IO uint8_t OTGISTAT; /**< OTG Interrupt Status Register, offset: 0x10 */
+ uint8_t RESERVED_4[3];
+ __IO uint8_t OTGICR; /**< OTG Interrupt Control Register, offset: 0x14 */
+ uint8_t RESERVED_5[3];
+ __IO uint8_t OTGSTAT; /**< OTG Status Register, offset: 0x18 */
+ uint8_t RESERVED_6[3];
+ __IO uint8_t OTGCTL; /**< OTG Control Register, offset: 0x1C */
+ uint8_t RESERVED_7[99];
+ __IO uint8_t ISTAT; /**< Interrupt Status Register, offset: 0x80 */
+ uint8_t RESERVED_8[3];
+ __IO uint8_t INTEN; /**< Interrupt Enable Register, offset: 0x84 */
+ uint8_t RESERVED_9[3];
+ __IO uint8_t ERRSTAT; /**< Error Interrupt Status Register, offset: 0x88 */
+ uint8_t RESERVED_10[3];
+ __IO uint8_t ERREN; /**< Error Interrupt Enable Register, offset: 0x8C */
+ uint8_t RESERVED_11[3];
+ __I uint8_t STAT; /**< Status Register, offset: 0x90 */
+ uint8_t RESERVED_12[3];
+ __IO uint8_t CTL; /**< Control Register, offset: 0x94 */
+ uint8_t RESERVED_13[3];
+ __IO uint8_t ADDR; /**< Address Register, offset: 0x98 */
+ uint8_t RESERVED_14[3];
+ __IO uint8_t BDTPAGE1; /**< BDT Page Register 1, offset: 0x9C */
+ uint8_t RESERVED_15[3];
+ __IO uint8_t FRMNUML; /**< Frame Number Register Low, offset: 0xA0 */
+ uint8_t RESERVED_16[3];
+ __IO uint8_t FRMNUMH; /**< Frame Number Register High, offset: 0xA4 */
+ uint8_t RESERVED_17[3];
+ __IO uint8_t TOKEN; /**< Token Register, offset: 0xA8 */
+ uint8_t RESERVED_18[3];
+ __IO uint8_t SOFTHLD; /**< SOF Threshold Register, offset: 0xAC */
+ uint8_t RESERVED_19[3];
+ __IO uint8_t BDTPAGE2; /**< BDT Page Register 2, offset: 0xB0 */
+ uint8_t RESERVED_20[3];
+ __IO uint8_t BDTPAGE3; /**< BDT Page Register 3, offset: 0xB4 */
+ uint8_t RESERVED_21[11];
+ struct { /* offset: 0xC0, array step: 0x4 */
+ __IO uint8_t ENDPT; /**< Endpoint Control Register, array offset: 0xC0, array step: 0x4 */
+ uint8_t RESERVED_0[3];
+ } ENDPOINT[16];
+ __IO uint8_t USBCTRL; /**< USB Control Register, offset: 0x100 */
+ uint8_t RESERVED_22[3];
+ __I uint8_t OBSERVE; /**< USB OTG Observe Register, offset: 0x104 */
+ uint8_t RESERVED_23[3];
+ __IO uint8_t CONTROL; /**< USB OTG Control Register, offset: 0x108 */
+ uint8_t RESERVED_24[3];
+ __IO uint8_t USBTRC0; /**< USB Transceiver Control Register 0, offset: 0x10C */
+ uint8_t RESERVED_25[7];
+ __IO uint8_t USBFRMADJUST; /**< Frame Adjust Register, offset: 0x114 */
+} USB_Type;
+
+/* ----------------------------------------------------------------------------
+ -- USB Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup USB_Register_Masks USB Register Masks
+ * @{
+ */
+
+/* PERID Bit Fields */
+#define USB_PERID_ID_MASK 0x3Fu
+#define USB_PERID_ID_SHIFT 0
+#define USB_PERID_ID(x) (((uint8_t)(((uint8_t)(x))<<USB_PERID_ID_SHIFT))&USB_PERID_ID_MASK)
+/* IDCOMP Bit Fields */
+#define USB_IDCOMP_NID_MASK 0x3Fu
+#define USB_IDCOMP_NID_SHIFT 0
+#define USB_IDCOMP_NID(x) (((uint8_t)(((uint8_t)(x))<<USB_IDCOMP_NID_SHIFT))&USB_IDCOMP_NID_MASK)
+/* REV Bit Fields */
+#define USB_REV_REV_MASK 0xFFu
+#define USB_REV_REV_SHIFT 0
+#define USB_REV_REV(x) (((uint8_t)(((uint8_t)(x))<<USB_REV_REV_SHIFT))&USB_REV_REV_MASK)
+/* ADDINFO Bit Fields */
+#define USB_ADDINFO_IEHOST_MASK 0x1u
+#define USB_ADDINFO_IEHOST_SHIFT 0
+#define USB_ADDINFO_IRQNUM_MASK 0xF8u
+#define USB_ADDINFO_IRQNUM_SHIFT 3
+#define USB_ADDINFO_IRQNUM(x) (((uint8_t)(((uint8_t)(x))<<USB_ADDINFO_IRQNUM_SHIFT))&USB_ADDINFO_IRQNUM_MASK)
+/* OTGISTAT Bit Fields */
+#define USB_OTGISTAT_AVBUSCHG_MASK 0x1u
+#define USB_OTGISTAT_AVBUSCHG_SHIFT 0
+#define USB_OTGISTAT_B_SESS_CHG_MASK 0x4u
+#define USB_OTGISTAT_B_SESS_CHG_SHIFT 2
+#define USB_OTGISTAT_SESSVLDCHG_MASK 0x8u
+#define USB_OTGISTAT_SESSVLDCHG_SHIFT 3
+#define USB_OTGISTAT_LINE_STATE_CHG_MASK 0x20u
+#define USB_OTGISTAT_LINE_STATE_CHG_SHIFT 5
+#define USB_OTGISTAT_ONEMSEC_MASK 0x40u
+#define USB_OTGISTAT_ONEMSEC_SHIFT 6
+#define USB_OTGISTAT_IDCHG_MASK 0x80u
+#define USB_OTGISTAT_IDCHG_SHIFT 7
+/* OTGICR Bit Fields */
+#define USB_OTGICR_AVBUSEN_MASK 0x1u
+#define USB_OTGICR_AVBUSEN_SHIFT 0
+#define USB_OTGICR_BSESSEN_MASK 0x4u
+#define USB_OTGICR_BSESSEN_SHIFT 2
+#define USB_OTGICR_SESSVLDEN_MASK 0x8u
+#define USB_OTGICR_SESSVLDEN_SHIFT 3
+#define USB_OTGICR_LINESTATEEN_MASK 0x20u
+#define USB_OTGICR_LINESTATEEN_SHIFT 5
+#define USB_OTGICR_ONEMSECEN_MASK 0x40u
+#define USB_OTGICR_ONEMSECEN_SHIFT 6
+#define USB_OTGICR_IDEN_MASK 0x80u
+#define USB_OTGICR_IDEN_SHIFT 7
+/* OTGSTAT Bit Fields */
+#define USB_OTGSTAT_AVBUSVLD_MASK 0x1u
+#define USB_OTGSTAT_AVBUSVLD_SHIFT 0
+#define USB_OTGSTAT_BSESSEND_MASK 0x4u
+#define USB_OTGSTAT_BSESSEND_SHIFT 2
+#define USB_OTGSTAT_SESS_VLD_MASK 0x8u
+#define USB_OTGSTAT_SESS_VLD_SHIFT 3
+#define USB_OTGSTAT_LINESTATESTABLE_MASK 0x20u
+#define USB_OTGSTAT_LINESTATESTABLE_SHIFT 5
+#define USB_OTGSTAT_ONEMSECEN_MASK 0x40u
+#define USB_OTGSTAT_ONEMSECEN_SHIFT 6
+#define USB_OTGSTAT_ID_MASK 0x80u
+#define USB_OTGSTAT_ID_SHIFT 7
+/* OTGCTL Bit Fields */
+#define USB_OTGCTL_OTGEN_MASK 0x4u
+#define USB_OTGCTL_OTGEN_SHIFT 2
+#define USB_OTGCTL_DMLOW_MASK 0x10u
+#define USB_OTGCTL_DMLOW_SHIFT 4
+#define USB_OTGCTL_DPLOW_MASK 0x20u
+#define USB_OTGCTL_DPLOW_SHIFT 5
+#define USB_OTGCTL_DPHIGH_MASK 0x80u
+#define USB_OTGCTL_DPHIGH_SHIFT 7
+/* ISTAT Bit Fields */
+#define USB_ISTAT_USBRST_MASK 0x1u
+#define USB_ISTAT_USBRST_SHIFT 0
+#define USB_ISTAT_ERROR_MASK 0x2u
+#define USB_ISTAT_ERROR_SHIFT 1
+#define USB_ISTAT_SOFTOK_MASK 0x4u
+#define USB_ISTAT_SOFTOK_SHIFT 2
+#define USB_ISTAT_TOKDNE_MASK 0x8u
+#define USB_ISTAT_TOKDNE_SHIFT 3
+#define USB_ISTAT_SLEEP_MASK 0x10u
+#define USB_ISTAT_SLEEP_SHIFT 4
+#define USB_ISTAT_RESUME_MASK 0x20u
+#define USB_ISTAT_RESUME_SHIFT 5
+#define USB_ISTAT_ATTACH_MASK 0x40u
+#define USB_ISTAT_ATTACH_SHIFT 6
+#define USB_ISTAT_STALL_MASK 0x80u
+#define USB_ISTAT_STALL_SHIFT 7
+/* INTEN Bit Fields */
+#define USB_INTEN_USBRSTEN_MASK 0x1u
+#define USB_INTEN_USBRSTEN_SHIFT 0
+#define USB_INTEN_ERROREN_MASK 0x2u
+#define USB_INTEN_ERROREN_SHIFT 1
+#define USB_INTEN_SOFTOKEN_MASK 0x4u
+#define USB_INTEN_SOFTOKEN_SHIFT 2
+#define USB_INTEN_TOKDNEEN_MASK 0x8u
+#define USB_INTEN_TOKDNEEN_SHIFT 3
+#define USB_INTEN_SLEEPEN_MASK 0x10u
+#define USB_INTEN_SLEEPEN_SHIFT 4
+#define USB_INTEN_RESUMEEN_MASK 0x20u
+#define USB_INTEN_RESUMEEN_SHIFT 5
+#define USB_INTEN_ATTACHEN_MASK 0x40u
+#define USB_INTEN_ATTACHEN_SHIFT 6
+#define USB_INTEN_STALLEN_MASK 0x80u
+#define USB_INTEN_STALLEN_SHIFT 7
+/* ERRSTAT Bit Fields */
+#define USB_ERRSTAT_PIDERR_MASK 0x1u
+#define USB_ERRSTAT_PIDERR_SHIFT 0
+#define USB_ERRSTAT_CRC5EOF_MASK 0x2u
+#define USB_ERRSTAT_CRC5EOF_SHIFT 1
+#define USB_ERRSTAT_CRC16_MASK 0x4u
+#define USB_ERRSTAT_CRC16_SHIFT 2
+#define USB_ERRSTAT_DFN8_MASK 0x8u
+#define USB_ERRSTAT_DFN8_SHIFT 3
+#define USB_ERRSTAT_BTOERR_MASK 0x10u
+#define USB_ERRSTAT_BTOERR_SHIFT 4
+#define USB_ERRSTAT_DMAERR_MASK 0x20u
+#define USB_ERRSTAT_DMAERR_SHIFT 5
+#define USB_ERRSTAT_BTSERR_MASK 0x80u
+#define USB_ERRSTAT_BTSERR_SHIFT 7
+/* ERREN Bit Fields */
+#define USB_ERREN_PIDERREN_MASK 0x1u
+#define USB_ERREN_PIDERREN_SHIFT 0
+#define USB_ERREN_CRC5EOFEN_MASK 0x2u
+#define USB_ERREN_CRC5EOFEN_SHIFT 1
+#define USB_ERREN_CRC16EN_MASK 0x4u
+#define USB_ERREN_CRC16EN_SHIFT 2
+#define USB_ERREN_DFN8EN_MASK 0x8u
+#define USB_ERREN_DFN8EN_SHIFT 3
+#define USB_ERREN_BTOERREN_MASK 0x10u
+#define USB_ERREN_BTOERREN_SHIFT 4
+#define USB_ERREN_DMAERREN_MASK 0x20u
+#define USB_ERREN_DMAERREN_SHIFT 5
+#define USB_ERREN_BTSERREN_MASK 0x80u
+#define USB_ERREN_BTSERREN_SHIFT 7
+/* STAT Bit Fields */
+#define USB_STAT_ODD_MASK 0x4u
+#define USB_STAT_ODD_SHIFT 2
+#define USB_STAT_TX_MASK 0x8u
+#define USB_STAT_TX_SHIFT 3
+#define USB_STAT_ENDP_MASK 0xF0u
+#define USB_STAT_ENDP_SHIFT 4
+#define USB_STAT_ENDP(x) (((uint8_t)(((uint8_t)(x))<<USB_STAT_ENDP_SHIFT))&USB_STAT_ENDP_MASK)
+/* CTL Bit Fields */
+#define USB_CTL_USBENSOFEN_MASK 0x1u
+#define USB_CTL_USBENSOFEN_SHIFT 0
+#define USB_CTL_ODDRST_MASK 0x2u
+#define USB_CTL_ODDRST_SHIFT 1
+#define USB_CTL_RESUME_MASK 0x4u
+#define USB_CTL_RESUME_SHIFT 2
+#define USB_CTL_HOSTMODEEN_MASK 0x8u
+#define USB_CTL_HOSTMODEEN_SHIFT 3
+#define USB_CTL_RESET_MASK 0x10u
+#define USB_CTL_RESET_SHIFT 4
+#define USB_CTL_TXSUSPENDTOKENBUSY_MASK 0x20u
+#define USB_CTL_TXSUSPENDTOKENBUSY_SHIFT 5
+#define USB_CTL_SE0_MASK 0x40u
+#define USB_CTL_SE0_SHIFT 6
+#define USB_CTL_JSTATE_MASK 0x80u
+#define USB_CTL_JSTATE_SHIFT 7
+/* ADDR Bit Fields */
+#define USB_ADDR_ADDR_MASK 0x7Fu
+#define USB_ADDR_ADDR_SHIFT 0
+#define USB_ADDR_ADDR(x) (((uint8_t)(((uint8_t)(x))<<USB_ADDR_ADDR_SHIFT))&USB_ADDR_ADDR_MASK)
+#define USB_ADDR_LSEN_MASK 0x80u
+#define USB_ADDR_LSEN_SHIFT 7
+/* BDTPAGE1 Bit Fields */
+#define USB_BDTPAGE1_BDTBA_MASK 0xFEu
+#define USB_BDTPAGE1_BDTBA_SHIFT 1
+#define USB_BDTPAGE1_BDTBA(x) (((uint8_t)(((uint8_t)(x))<<USB_BDTPAGE1_BDTBA_SHIFT))&USB_BDTPAGE1_BDTBA_MASK)
+/* FRMNUML Bit Fields */
+#define USB_FRMNUML_FRM_MASK 0xFFu
+#define USB_FRMNUML_FRM_SHIFT 0
+#define USB_FRMNUML_FRM(x) (((uint8_t)(((uint8_t)(x))<<USB_FRMNUML_FRM_SHIFT))&USB_FRMNUML_FRM_MASK)
+/* FRMNUMH Bit Fields */
+#define USB_FRMNUMH_FRM_MASK 0x7u
+#define USB_FRMNUMH_FRM_SHIFT 0
+#define USB_FRMNUMH_FRM(x) (((uint8_t)(((uint8_t)(x))<<USB_FRMNUMH_FRM_SHIFT))&USB_FRMNUMH_FRM_MASK)
+/* TOKEN Bit Fields */
+#define USB_TOKEN_TOKENENDPT_MASK 0xFu
+#define USB_TOKEN_TOKENENDPT_SHIFT 0
+#define USB_TOKEN_TOKENENDPT(x) (((uint8_t)(((uint8_t)(x))<<USB_TOKEN_TOKENENDPT_SHIFT))&USB_TOKEN_TOKENENDPT_MASK)
+#define USB_TOKEN_TOKENPID_MASK 0xF0u
+#define USB_TOKEN_TOKENPID_SHIFT 4
+#define USB_TOKEN_TOKENPID(x) (((uint8_t)(((uint8_t)(x))<<USB_TOKEN_TOKENPID_SHIFT))&USB_TOKEN_TOKENPID_MASK)
+/* SOFTHLD Bit Fields */
+#define USB_SOFTHLD_CNT_MASK 0xFFu
+#define USB_SOFTHLD_CNT_SHIFT 0
+#define USB_SOFTHLD_CNT(x) (((uint8_t)(((uint8_t)(x))<<USB_SOFTHLD_CNT_SHIFT))&USB_SOFTHLD_CNT_MASK)
+/* BDTPAGE2 Bit Fields */
+#define USB_BDTPAGE2_BDTBA_MASK 0xFFu
+#define USB_BDTPAGE2_BDTBA_SHIFT 0
+#define USB_BDTPAGE2_BDTBA(x) (((uint8_t)(((uint8_t)(x))<<USB_BDTPAGE2_BDTBA_SHIFT))&USB_BDTPAGE2_BDTBA_MASK)
+/* BDTPAGE3 Bit Fields */
+#define USB_BDTPAGE3_BDTBA_MASK 0xFFu
+#define USB_BDTPAGE3_BDTBA_SHIFT 0
+#define USB_BDTPAGE3_BDTBA(x) (((uint8_t)(((uint8_t)(x))<<USB_BDTPAGE3_BDTBA_SHIFT))&USB_BDTPAGE3_BDTBA_MASK)
+/* ENDPT Bit Fields */
+#define USB_ENDPT_EPHSHK_MASK 0x1u
+#define USB_ENDPT_EPHSHK_SHIFT 0
+#define USB_ENDPT_EPSTALL_MASK 0x2u
+#define USB_ENDPT_EPSTALL_SHIFT 1
+#define USB_ENDPT_EPTXEN_MASK 0x4u
+#define USB_ENDPT_EPTXEN_SHIFT 2
+#define USB_ENDPT_EPRXEN_MASK 0x8u
+#define USB_ENDPT_EPRXEN_SHIFT 3
+#define USB_ENDPT_EPCTLDIS_MASK 0x10u
+#define USB_ENDPT_EPCTLDIS_SHIFT 4
+#define USB_ENDPT_RETRYDIS_MASK 0x40u
+#define USB_ENDPT_RETRYDIS_SHIFT 6
+#define USB_ENDPT_HOSTWOHUB_MASK 0x80u
+#define USB_ENDPT_HOSTWOHUB_SHIFT 7
+/* USBCTRL Bit Fields */
+#define USB_USBCTRL_PDE_MASK 0x40u
+#define USB_USBCTRL_PDE_SHIFT 6
+#define USB_USBCTRL_SUSP_MASK 0x80u
+#define USB_USBCTRL_SUSP_SHIFT 7
+/* OBSERVE Bit Fields */
+#define USB_OBSERVE_DMPD_MASK 0x10u
+#define USB_OBSERVE_DMPD_SHIFT 4
+#define USB_OBSERVE_DPPD_MASK 0x40u
+#define USB_OBSERVE_DPPD_SHIFT 6
+#define USB_OBSERVE_DPPU_MASK 0x80u
+#define USB_OBSERVE_DPPU_SHIFT 7
+/* CONTROL Bit Fields */
+#define USB_CONTROL_DPPULLUPNONOTG_MASK 0x10u
+#define USB_CONTROL_DPPULLUPNONOTG_SHIFT 4
+/* USBTRC0 Bit Fields */
+#define USB_USBTRC0_USB_RESUME_INT_MASK 0x1u
+#define USB_USBTRC0_USB_RESUME_INT_SHIFT 0
+#define USB_USBTRC0_SYNC_DET_MASK 0x2u
+#define USB_USBTRC0_SYNC_DET_SHIFT 1
+#define USB_USBTRC0_USBRESMEN_MASK 0x20u
+#define USB_USBTRC0_USBRESMEN_SHIFT 5
+#define USB_USBTRC0_USBRESET_MASK 0x80u
+#define USB_USBTRC0_USBRESET_SHIFT 7
+/* USBFRMADJUST Bit Fields */
+#define USB_USBFRMADJUST_ADJ_MASK 0xFFu
+#define USB_USBFRMADJUST_ADJ_SHIFT 0
+#define USB_USBFRMADJUST_ADJ(x) (((uint8_t)(((uint8_t)(x))<<USB_USBFRMADJUST_ADJ_SHIFT))&USB_USBFRMADJUST_ADJ_MASK)
+
+/**
+ * @}
+ */ /* end of group USB_Register_Masks */
+
+
+/* USB - Peripheral instance base addresses */
+/** Peripheral USB0 base address */
+#define USB0_BASE (0x40072000u)
+/** Peripheral USB0 base pointer */
+#define USB0 ((USB_Type *)USB0_BASE)
+
+/**
+ * @}
+ */ /* end of group USB_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- USBDCD Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup USBDCD_Peripheral_Access_Layer USBDCD Peripheral Access Layer
+ * @{
+ */
+
+/** USBDCD - Register Layout Typedef */
+typedef struct {
+ __IO uint32_t CONTROL; /**< Control Register, offset: 0x0 */
+ __IO uint32_t CLOCK; /**< Clock Register, offset: 0x4 */
+ __I uint32_t STATUS; /**< Status Register, offset: 0x8 */
+ uint8_t RESERVED_0[4];
+ __IO uint32_t TIMER0; /**< TIMER0 Register, offset: 0x10 */
+ __IO uint32_t TIMER1; /**< , offset: 0x14 */
+ __IO uint32_t TIMER2; /**< , offset: 0x18 */
+} USBDCD_Type;
+
+/* ----------------------------------------------------------------------------
+ -- USBDCD Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup USBDCD_Register_Masks USBDCD Register Masks
+ * @{
+ */
+
+/* CONTROL Bit Fields */
+#define USBDCD_CONTROL_IACK_MASK 0x1u
+#define USBDCD_CONTROL_IACK_SHIFT 0
+#define USBDCD_CONTROL_IF_MASK 0x100u
+#define USBDCD_CONTROL_IF_SHIFT 8
+#define USBDCD_CONTROL_IE_MASK 0x10000u
+#define USBDCD_CONTROL_IE_SHIFT 16
+#define USBDCD_CONTROL_START_MASK 0x1000000u
+#define USBDCD_CONTROL_START_SHIFT 24
+#define USBDCD_CONTROL_SR_MASK 0x2000000u
+#define USBDCD_CONTROL_SR_SHIFT 25
+/* CLOCK Bit Fields */
+#define USBDCD_CLOCK_CLOCK_UNIT_MASK 0x1u
+#define USBDCD_CLOCK_CLOCK_UNIT_SHIFT 0
+#define USBDCD_CLOCK_CLOCK_SPEED_MASK 0xFFCu
+#define USBDCD_CLOCK_CLOCK_SPEED_SHIFT 2
+#define USBDCD_CLOCK_CLOCK_SPEED(x) (((uint32_t)(((uint32_t)(x))<<USBDCD_CLOCK_CLOCK_SPEED_SHIFT))&USBDCD_CLOCK_CLOCK_SPEED_MASK)
+/* STATUS Bit Fields */
+#define USBDCD_STATUS_SEQ_RES_MASK 0x30000u
+#define USBDCD_STATUS_SEQ_RES_SHIFT 16
+#define USBDCD_STATUS_SEQ_RES(x) (((uint32_t)(((uint32_t)(x))<<USBDCD_STATUS_SEQ_RES_SHIFT))&USBDCD_STATUS_SEQ_RES_MASK)
+#define USBDCD_STATUS_SEQ_STAT_MASK 0xC0000u
+#define USBDCD_STATUS_SEQ_STAT_SHIFT 18
+#define USBDCD_STATUS_SEQ_STAT(x) (((uint32_t)(((uint32_t)(x))<<USBDCD_STATUS_SEQ_STAT_SHIFT))&USBDCD_STATUS_SEQ_STAT_MASK)
+#define USBDCD_STATUS_ERR_MASK 0x100000u
+#define USBDCD_STATUS_ERR_SHIFT 20
+#define USBDCD_STATUS_TO_MASK 0x200000u
+#define USBDCD_STATUS_TO_SHIFT 21
+#define USBDCD_STATUS_ACTIVE_MASK 0x400000u
+#define USBDCD_STATUS_ACTIVE_SHIFT 22
+/* TIMER0 Bit Fields */
+#define USBDCD_TIMER0_TUNITCON_MASK 0xFFFu
+#define USBDCD_TIMER0_TUNITCON_SHIFT 0
+#define USBDCD_TIMER0_TUNITCON(x) (((uint32_t)(((uint32_t)(x))<<USBDCD_TIMER0_TUNITCON_SHIFT))&USBDCD_TIMER0_TUNITCON_MASK)
+#define USBDCD_TIMER0_TSEQ_INIT_MASK 0x3FF0000u
+#define USBDCD_TIMER0_TSEQ_INIT_SHIFT 16
+#define USBDCD_TIMER0_TSEQ_INIT(x) (((uint32_t)(((uint32_t)(x))<<USBDCD_TIMER0_TSEQ_INIT_SHIFT))&USBDCD_TIMER0_TSEQ_INIT_MASK)
+/* TIMER1 Bit Fields */
+#define USBDCD_TIMER1_TVDPSRC_ON_MASK 0x3FFu
+#define USBDCD_TIMER1_TVDPSRC_ON_SHIFT 0
+#define USBDCD_TIMER1_TVDPSRC_ON(x) (((uint32_t)(((uint32_t)(x))<<USBDCD_TIMER1_TVDPSRC_ON_SHIFT))&USBDCD_TIMER1_TVDPSRC_ON_MASK)
+#define USBDCD_TIMER1_TDCD_DBNC_MASK 0x3FF0000u
+#define USBDCD_TIMER1_TDCD_DBNC_SHIFT 16
+#define USBDCD_TIMER1_TDCD_DBNC(x) (((uint32_t)(((uint32_t)(x))<<USBDCD_TIMER1_TDCD_DBNC_SHIFT))&USBDCD_TIMER1_TDCD_DBNC_MASK)
+/* TIMER2 Bit Fields */
+#define USBDCD_TIMER2_CHECK_DM_MASK 0xFu
+#define USBDCD_TIMER2_CHECK_DM_SHIFT 0
+#define USBDCD_TIMER2_CHECK_DM(x) (((uint32_t)(((uint32_t)(x))<<USBDCD_TIMER2_CHECK_DM_SHIFT))&USBDCD_TIMER2_CHECK_DM_MASK)
+#define USBDCD_TIMER2_TVDPSRC_CON_MASK 0x3FF0000u
+#define USBDCD_TIMER2_TVDPSRC_CON_SHIFT 16
+#define USBDCD_TIMER2_TVDPSRC_CON(x) (((uint32_t)(((uint32_t)(x))<<USBDCD_TIMER2_TVDPSRC_CON_SHIFT))&USBDCD_TIMER2_TVDPSRC_CON_MASK)
+
+/**
+ * @}
+ */ /* end of group USBDCD_Register_Masks */
+
+
+/* USBDCD - Peripheral instance base addresses */
+/** Peripheral USBDCD base address */
+#define USBDCD_BASE (0x40035000u)
+/** Peripheral USBDCD base pointer */
+#define USBDCD ((USBDCD_Type *)USBDCD_BASE)
+
+/**
+ * @}
+ */ /* end of group USBDCD_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- VREF Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup VREF_Peripheral_Access_Layer VREF Peripheral Access Layer
+ * @{
+ */
+
+/** VREF - Register Layout Typedef */
+typedef struct {
+ __IO uint8_t TRM; /**< VREF Trim Register, offset: 0x0 */
+ __IO uint8_t SC; /**< VREF Status and Control Register, offset: 0x1 */
+} VREF_Type;
+
+/* ----------------------------------------------------------------------------
+ -- VREF Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup VREF_Register_Masks VREF Register Masks
+ * @{
+ */
+
+/* TRM Bit Fields */
+#define VREF_TRM_TRIM_MASK 0x3Fu
+#define VREF_TRM_TRIM_SHIFT 0
+#define VREF_TRM_TRIM(x) (((uint8_t)(((uint8_t)(x))<<VREF_TRM_TRIM_SHIFT))&VREF_TRM_TRIM_MASK)
+#define VREF_TRM_CHOPEN_MASK 0x40u
+#define VREF_TRM_CHOPEN_SHIFT 6
+/* SC Bit Fields */
+#define VREF_SC_MODE_LV_MASK 0x3u
+#define VREF_SC_MODE_LV_SHIFT 0
+#define VREF_SC_MODE_LV(x) (((uint8_t)(((uint8_t)(x))<<VREF_SC_MODE_LV_SHIFT))&VREF_SC_MODE_LV_MASK)
+#define VREF_SC_VREFST_MASK 0x4u
+#define VREF_SC_VREFST_SHIFT 2
+#define VREF_SC_REGEN_MASK 0x40u
+#define VREF_SC_REGEN_SHIFT 6
+#define VREF_SC_VREFEN_MASK 0x80u
+#define VREF_SC_VREFEN_SHIFT 7
+
+/**
+ * @}
+ */ /* end of group VREF_Register_Masks */
+
+
+/* VREF - Peripheral instance base addresses */
+/** Peripheral VREF base address */
+#define VREF_BASE (0x40074000u)
+/** Peripheral VREF base pointer */
+#define VREF ((VREF_Type *)VREF_BASE)
+
+/**
+ * @}
+ */ /* end of group VREF_Peripheral_Access_Layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- WDOG Peripheral Access Layer
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup WDOG_Peripheral_Access_Layer WDOG Peripheral Access Layer
+ * @{
+ */
+
+/** WDOG - Register Layout Typedef */
+typedef struct {
+ __IO uint16_t STCTRLH; /**< Watchdog Status and Control Register High, offset: 0x0 */
+ __IO uint16_t STCTRLL; /**< Watchdog Status and Control Register Low, offset: 0x2 */
+ __IO uint16_t TOVALH; /**< Watchdog Time-out Value Register High, offset: 0x4 */
+ __IO uint16_t TOVALL; /**< Watchdog Time-out Value Register Low, offset: 0x6 */
+ __IO uint16_t WINH; /**< Watchdog Window Register High, offset: 0x8 */
+ __IO uint16_t WINL; /**< Watchdog Window Register Low, offset: 0xA */
+ __IO uint16_t REFRESH; /**< Watchdog Refresh Register, offset: 0xC */
+ __IO uint16_t UNLOCK; /**< Watchdog Unlock Register, offset: 0xE */
+ __IO uint16_t TMROUTH; /**< Watchdog Timer Output Register High, offset: 0x10 */
+ __IO uint16_t TMROUTL; /**< Watchdog Timer Output Register Low, offset: 0x12 */
+ __IO uint16_t RSTCNT; /**< Watchdog Reset Count Register, offset: 0x14 */
+ __IO uint16_t PRESC; /**< Watchdog Prescaler Register, offset: 0x16 */
+} WDOG_Type;
+
+/* ----------------------------------------------------------------------------
+ -- WDOG Register Masks
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup WDOG_Register_Masks WDOG Register Masks
+ * @{
+ */
+
+/* STCTRLH Bit Fields */
+#define WDOG_STCTRLH_WDOGEN_MASK 0x1u
+#define WDOG_STCTRLH_WDOGEN_SHIFT 0
+#define WDOG_STCTRLH_CLKSRC_MASK 0x2u
+#define WDOG_STCTRLH_CLKSRC_SHIFT 1
+#define WDOG_STCTRLH_IRQRSTEN_MASK 0x4u
+#define WDOG_STCTRLH_IRQRSTEN_SHIFT 2
+#define WDOG_STCTRLH_WINEN_MASK 0x8u
+#define WDOG_STCTRLH_WINEN_SHIFT 3
+#define WDOG_STCTRLH_ALLOWUPDATE_MASK 0x10u
+#define WDOG_STCTRLH_ALLOWUPDATE_SHIFT 4
+#define WDOG_STCTRLH_DBGEN_MASK 0x20u
+#define WDOG_STCTRLH_DBGEN_SHIFT 5
+#define WDOG_STCTRLH_STOPEN_MASK 0x40u
+#define WDOG_STCTRLH_STOPEN_SHIFT 6
+#define WDOG_STCTRLH_WAITEN_MASK 0x80u
+#define WDOG_STCTRLH_WAITEN_SHIFT 7
+#define WDOG_STCTRLH_TESTWDOG_MASK 0x400u
+#define WDOG_STCTRLH_TESTWDOG_SHIFT 10
+#define WDOG_STCTRLH_TESTSEL_MASK 0x800u
+#define WDOG_STCTRLH_TESTSEL_SHIFT 11
+#define WDOG_STCTRLH_BYTESEL_MASK 0x3000u
+#define WDOG_STCTRLH_BYTESEL_SHIFT 12
+#define WDOG_STCTRLH_BYTESEL(x) (((uint16_t)(((uint16_t)(x))<<WDOG_STCTRLH_BYTESEL_SHIFT))&WDOG_STCTRLH_BYTESEL_MASK)
+#define WDOG_STCTRLH_DISTESTWDOG_MASK 0x4000u
+#define WDOG_STCTRLH_DISTESTWDOG_SHIFT 14
+/* STCTRLL Bit Fields */
+#define WDOG_STCTRLL_INTFLG_MASK 0x8000u
+#define WDOG_STCTRLL_INTFLG_SHIFT 15
+/* TOVALH Bit Fields */
+#define WDOG_TOVALH_TOVALHIGH_MASK 0xFFFFu
+#define WDOG_TOVALH_TOVALHIGH_SHIFT 0
+#define WDOG_TOVALH_TOVALHIGH(x) (((uint16_t)(((uint16_t)(x))<<WDOG_TOVALH_TOVALHIGH_SHIFT))&WDOG_TOVALH_TOVALHIGH_MASK)
+/* TOVALL Bit Fields */
+#define WDOG_TOVALL_TOVALLOW_MASK 0xFFFFu
+#define WDOG_TOVALL_TOVALLOW_SHIFT 0
+#define WDOG_TOVALL_TOVALLOW(x) (((uint16_t)(((uint16_t)(x))<<WDOG_TOVALL_TOVALLOW_SHIFT))&WDOG_TOVALL_TOVALLOW_MASK)
+/* WINH Bit Fields */
+#define WDOG_WINH_WINHIGH_MASK 0xFFFFu
+#define WDOG_WINH_WINHIGH_SHIFT 0
+#define WDOG_WINH_WINHIGH(x) (((uint16_t)(((uint16_t)(x))<<WDOG_WINH_WINHIGH_SHIFT))&WDOG_WINH_WINHIGH_MASK)
+/* WINL Bit Fields */
+#define WDOG_WINL_WINLOW_MASK 0xFFFFu
+#define WDOG_WINL_WINLOW_SHIFT 0
+#define WDOG_WINL_WINLOW(x) (((uint16_t)(((uint16_t)(x))<<WDOG_WINL_WINLOW_SHIFT))&WDOG_WINL_WINLOW_MASK)
+/* REFRESH Bit Fields */
+#define WDOG_REFRESH_WDOGREFRESH_MASK 0xFFFFu
+#define WDOG_REFRESH_WDOGREFRESH_SHIFT 0
+#define WDOG_REFRESH_WDOGREFRESH(x) (((uint16_t)(((uint16_t)(x))<<WDOG_REFRESH_WDOGREFRESH_SHIFT))&WDOG_REFRESH_WDOGREFRESH_MASK)
+/* UNLOCK Bit Fields */
+#define WDOG_UNLOCK_WDOGUNLOCK_MASK 0xFFFFu
+#define WDOG_UNLOCK_WDOGUNLOCK_SHIFT 0
+#define WDOG_UNLOCK_WDOGUNLOCK(x) (((uint16_t)(((uint16_t)(x))<<WDOG_UNLOCK_WDOGUNLOCK_SHIFT))&WDOG_UNLOCK_WDOGUNLOCK_MASK)
+/* TMROUTH Bit Fields */
+#define WDOG_TMROUTH_TIMEROUTHIGH_MASK 0xFFFFu
+#define WDOG_TMROUTH_TIMEROUTHIGH_SHIFT 0
+#define WDOG_TMROUTH_TIMEROUTHIGH(x) (((uint16_t)(((uint16_t)(x))<<WDOG_TMROUTH_TIMEROUTHIGH_SHIFT))&WDOG_TMROUTH_TIMEROUTHIGH_MASK)
+/* TMROUTL Bit Fields */
+#define WDOG_TMROUTL_TIMEROUTLOW_MASK 0xFFFFu
+#define WDOG_TMROUTL_TIMEROUTLOW_SHIFT 0
+#define WDOG_TMROUTL_TIMEROUTLOW(x) (((uint16_t)(((uint16_t)(x))<<WDOG_TMROUTL_TIMEROUTLOW_SHIFT))&WDOG_TMROUTL_TIMEROUTLOW_MASK)
+/* RSTCNT Bit Fields */
+#define WDOG_RSTCNT_RSTCNT_MASK 0xFFFFu
+#define WDOG_RSTCNT_RSTCNT_SHIFT 0
+#define WDOG_RSTCNT_RSTCNT(x) (((uint16_t)(((uint16_t)(x))<<WDOG_RSTCNT_RSTCNT_SHIFT))&WDOG_RSTCNT_RSTCNT_MASK)
+/* PRESC Bit Fields */
+#define WDOG_PRESC_PRESCVAL_MASK 0x700u
+#define WDOG_PRESC_PRESCVAL_SHIFT 8
+#define WDOG_PRESC_PRESCVAL(x) (((uint16_t)(((uint16_t)(x))<<WDOG_PRESC_PRESCVAL_SHIFT))&WDOG_PRESC_PRESCVAL_MASK)
+
+/**
+ * @}
+ */ /* end of group WDOG_Register_Masks */
+
+
+/* WDOG - Peripheral instance base addresses */
+/** Peripheral WDOG base address */
+#define WDOG_BASE (0x40052000u)
+/** Peripheral WDOG base pointer */
+#define WDOG ((WDOG_Type *)WDOG_BASE)
+
+/**
+ * @}
+ */ /* end of group WDOG_Peripheral_Access_Layer */
+
+
+/*
+** End of section using anonymous unions
+*/
+
+#if defined(__ARMCC_VERSION)
+ #pragma pop
+#elif defined(__CWCC__)
+ #pragma pop
+#elif defined(__GNUC__)
+ /* leave anonymous unions enabled */
+#elif defined(__IAR_SYSTEMS_ICC__)
+ #pragma language=default
+#else
+ #error Not supported compiler type
+#endif
+
+/**
+ * @}
+ */ /* end of group Peripheral_access_layer */
+
+
+/* ----------------------------------------------------------------------------
+ -- Backward Compatibility
+ ---------------------------------------------------------------------------- */
+
+/**
+ * @addtogroup Backward_Compatibility_Symbols Backward Compatibility
+ * @{
+ */
+
+/* No backward compatibility issues. */
+
+/**
+ * @}
+ */ /* end of group Backward_Compatibility_Symbols */
+
+
+#endif /* #if !defined(MK20D5_H_) */
+
+/* MK20D5.h, eof. */
+
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_TEENSY3_1/TARGET_Freescale/TARGET_K20XX/PeripheralPins.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,46 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2015 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef MBED_PERIPHERALPINS_H +#define MBED_PERIPHERALPINS_H + +#include "pinmap.h" +#include "PeripheralNames.h" + +/************ADC***************/ +extern const PinMap PinMap_ADC[]; + +/************DAC***************/ +extern const PinMap PinMap_DAC[]; + +/************I2C***************/ +extern const PinMap PinMap_I2C_SDA[]; +extern const PinMap PinMap_I2C_SCL[]; + +/************UART***************/ +extern const PinMap PinMap_UART_TX[]; +extern const PinMap PinMap_UART_RX[]; + +/************SPI***************/ +extern const PinMap PinMap_SPI_SCLK[]; +extern const PinMap PinMap_SPI_MOSI[]; +extern const PinMap PinMap_SPI_MISO[]; +extern const PinMap PinMap_SPI_SSEL[]; + +/************PWM***************/ +extern const PinMap PinMap_PWM[]; + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_TEENSY3_1/TARGET_Freescale/TARGET_K20XX/PortNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,35 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PORTNAMES_H
+#define MBED_PORTNAMES_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PortA = 0,
+ PortB = 1,
+ PortC = 2,
+ PortD = 3,
+ PortE = 4
+} PortName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_TEENSY3_1/TARGET_Freescale/TARGET_K20XX/TARGET_TEENSY3_1/PeripheralNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,86 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ UART_0 = (int)UART0_BASE,
+ UART_1 = (int)UART1_BASE,
+ UART_2 = (int)UART2_BASE
+} UARTName;
+#define STDIO_UART_TX USBTX
+#define STDIO_UART_RX USBRX
+#define STDIO_UART UART_0
+
+typedef enum {
+ I2C_0 = (int)I2C0_BASE,
+ I2C_1 = (int)I2C1_BASE,
+} I2CName;
+
+#define TPM_SHIFT 8
+typedef enum {
+ PWM_1 = (0 << TPM_SHIFT) | (0), // FTM0 CH0
+ PWM_2 = (0 << TPM_SHIFT) | (1), // FTM0 CH1
+ PWM_3 = (0 << TPM_SHIFT) | (2), // FTM0 CH2
+ PWM_4 = (0 << TPM_SHIFT) | (3), // FTM0 CH3
+ PWM_5 = (0 << TPM_SHIFT) | (4), // FTM0 CH4
+ PWM_6 = (0 << TPM_SHIFT) | (5), // FTM0 CH5
+ PWM_7 = (0 << TPM_SHIFT) | (6), // FTM0 CH6
+ PWM_8 = (0 << TPM_SHIFT) | (7), // FTM0 CH7
+ PWM_9 = (1 << TPM_SHIFT) | (0), // FTM1 CH0
+ PWM_10 = (1 << TPM_SHIFT) | (1), // FTM1 CH1
+} PWMName;
+
+typedef enum {
+ ADC0_SE4b = 4,
+ ADC0_SE5b = 5,
+ ADC0_SE6b = 6,
+ ADC0_SE7b = 7,
+ ADC0_SE8 = 8,
+ ADC0_SE9 = 9,
+ ADC0_SE12 = 12,
+ ADC0_SE13 = 13,
+ ADC0_SE14 = 14,
+ ADC0_SE15 = 15,
+ ADC1_SE4b = 16,
+ ADC1_SE5b = 17,
+ ADC1_SE6b = 18,
+ ADC1_SE7b = 19,
+} ADCName;
+
+typedef enum {
+ DAC_0 = 0
+} DACName;
+
+typedef enum {
+ SPI_0 = (int)SPI0_BASE,
+ SPI_1 = (int)SPI0_BASE,
+ SPI_2 = (int)SPI0_BASE,
+ SPI_3 = (int)SPI0_BASE,
+ SPI_4 = (int)SPI0_BASE,
+} SPIName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_TEENSY3_1/TARGET_Freescale/TARGET_K20XX/TARGET_TEENSY3_1/PinNames.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,293 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+ PIN_INPUT,
+ PIN_OUTPUT
+} PinDirection;
+
+/* PCR - 0x1000 */
+#define PORT_SHIFT 12
+
+typedef enum {
+ PTA0 = 0x0,
+ PTA1 = 0x4,
+ PTA2 = 0x8,
+ PTA3 = 0xc,
+ PTA4 = 0x10,
+ PTA5 = 0x14,
+ PTA6 = 0x18,
+ PTA7 = 0x1c,
+ PTA8 = 0x20,
+ PTA9 = 0x24,
+ PTA10 = 0x28,
+ PTA11 = 0x2c,
+ PTA12 = 0x30,
+ PTA13 = 0x34,
+ PTA14 = 0x38,
+ PTA15 = 0x3c,
+ PTA16 = 0x40,
+ PTA17 = 0x44,
+ PTA18 = 0x48,
+ PTA19 = 0x4c,
+ PTA20 = 0x50,
+ PTA21 = 0x54,
+ PTA22 = 0x58,
+ PTA23 = 0x5c,
+ PTA24 = 0x60,
+ PTA25 = 0x64,
+ PTA26 = 0x68,
+ PTA27 = 0x6c,
+ PTA28 = 0x70,
+ PTA29 = 0x74,
+ PTA30 = 0x78,
+ PTA31 = 0x7c,
+ PTB0 = 0x1000,
+ PTB1 = 0x1004,
+ PTB2 = 0x1008,
+ PTB3 = 0x100c,
+ PTB4 = 0x1010,
+ PTB5 = 0x1014,
+ PTB6 = 0x1018,
+ PTB7 = 0x101c,
+ PTB8 = 0x1020,
+ PTB9 = 0x1024,
+ PTB10 = 0x1028,
+ PTB11 = 0x102c,
+ PTB12 = 0x1030,
+ PTB13 = 0x1034,
+ PTB14 = 0x1038,
+ PTB15 = 0x103c,
+ PTB16 = 0x1040,
+ PTB17 = 0x1044,
+ PTB18 = 0x1048,
+ PTB19 = 0x104c,
+ PTB20 = 0x1050,
+ PTB21 = 0x1054,
+ PTB22 = 0x1058,
+ PTB23 = 0x105c,
+ PTB24 = 0x1060,
+ PTB25 = 0x1064,
+ PTB26 = 0x1068,
+ PTB27 = 0x106c,
+ PTB28 = 0x1070,
+ PTB29 = 0x1074,
+ PTB30 = 0x1078,
+ PTB31 = 0x107c,
+ PTC0 = 0x2000,
+ PTC1 = 0x2004,
+ PTC2 = 0x2008,
+ PTC3 = 0x200c,
+ PTC4 = 0x2010,
+ PTC5 = 0x2014,
+ PTC6 = 0x2018,
+ PTC7 = 0x201c,
+ PTC8 = 0x2020,
+ PTC9 = 0x2024,
+ PTC10 = 0x2028,
+ PTC11 = 0x202c,
+ PTC12 = 0x2030,
+ PTC13 = 0x2034,
+ PTC14 = 0x2038,
+ PTC15 = 0x203c,
+ PTC16 = 0x2040,
+ PTC17 = 0x2044,
+ PTC18 = 0x2048,
+ PTC19 = 0x204c,
+ PTC20 = 0x2050,
+ PTC21 = 0x2054,
+ PTC22 = 0x2058,
+ PTC23 = 0x205c,
+ PTC24 = 0x2060,
+ PTC25 = 0x2064,
+ PTC26 = 0x2068,
+ PTC27 = 0x206c,
+ PTC28 = 0x2070,
+ PTC29 = 0x2074,
+ PTC30 = 0x2078,
+ PTC31 = 0x207c,
+ PTD0 = 0x3000,
+ PTD1 = 0x3004,
+ PTD2 = 0x3008,
+ PTD3 = 0x300c,
+ PTD4 = 0x3010,
+ PTD5 = 0x3014,
+ PTD6 = 0x3018,
+ PTD7 = 0x301c,
+ PTD8 = 0x3020,
+ PTD9 = 0x3024,
+ PTD10 = 0x3028,
+ PTD11 = 0x302c,
+ PTD12 = 0x3030,
+ PTD13 = 0x3034,
+ PTD14 = 0x3038,
+ PTD15 = 0x303c,
+ PTD16 = 0x3040,
+ PTD17 = 0x3044,
+ PTD18 = 0x3048,
+ PTD19 = 0x304c,
+ PTD20 = 0x3050,
+ PTD21 = 0x3054,
+ PTD22 = 0x3058,
+ PTD23 = 0x305c,
+ PTD24 = 0x3060,
+ PTD25 = 0x3064,
+ PTD26 = 0x3068,
+ PTD27 = 0x306c,
+ PTD28 = 0x3070,
+ PTD29 = 0x3074,
+ PTD30 = 0x3078,
+ PTD31 = 0x307c,
+ PTE0 = 0x4000,
+ PTE1 = 0x4004,
+ PTE2 = 0x4008,
+ PTE3 = 0x400c,
+ PTE4 = 0x4010,
+ PTE5 = 0x4014,
+ PTE6 = 0x4018,
+ PTE7 = 0x401c,
+ PTE8 = 0x4020,
+ PTE9 = 0x4024,
+ PTE10 = 0x4028,
+ PTE11 = 0x402c,
+ PTE12 = 0x4030,
+ PTE13 = 0x4034,
+ PTE14 = 0x4038,
+ PTE15 = 0x403c,
+ PTE16 = 0x4040,
+ PTE17 = 0x4044,
+ PTE18 = 0x4048,
+ PTE19 = 0x404c,
+ PTE20 = 0x4050,
+ PTE21 = 0x4054,
+ PTE22 = 0x4058,
+ PTE23 = 0x405c,
+ PTE24 = 0x4060,
+ PTE25 = 0x4064,
+ PTE26 = 0x4068,
+ PTE27 = 0x406c,
+ PTE28 = 0x4070,
+ PTE29 = 0x4074,
+ PTE30 = 0x4078,
+ PTE31 = 0x407c,
+
+ LED_RED = PTC5, // set these to the only led on board
+ LED_GREEN = PTC5, //
+ LED_BLUE = PTC5, //
+
+ // mbed original LED naming
+ LED1 = LED_RED,
+ LED2 = LED_GREEN,
+ LED3 = LED_BLUE,
+ LED4 = LED_BLUE,
+
+ // USB Pins
+ USBTX = PTB17,
+ USBRX = PTB16,
+
+ // DAC Pins
+ DAC0_OUT = 0xFEFE, /* DAC does not have Pin Name in RM */
+
+ // Teensy3.1 Headers
+ p0 = PTB16,
+ p1 = PTB17,
+ p2 = PTD0,
+ p3 = PTA12,
+ p4 = PTA13,
+ p5 = PTD7,
+ p6 = PTD4,
+ p7 = PTD2,
+ p8 = PTD3,
+ p9 = PTC3,
+ p10 = PTC4,
+ p11 = PTC6,
+ p12 = PTC7,
+ p13 = PTC5,
+ p14 = PTD1,
+ p15 = PTC0,
+ p16 = PTB0,
+ p17 = PTB1,
+ p18 = PTB3,
+ p19 = PTB2,
+ p20 = PTD5,
+ p21 = PTD6,
+ p22 = PTC1,
+ p23 = PTC2,
+ p24 = PTA5,
+ p25 = PTD19,
+ p26 = PTE1,
+ p27 = PTC9,
+ p28 = PTC8,
+ p29 = PTC10,
+ p30 = PTC11,
+ p31 = PTE0,
+ p32 = PTB18,
+ p33 = PTA4,
+
+ A0 = PTD1,
+ A1 = PTC0,
+ A2 = PTB0,
+ A3 = PTB1,
+ A4 = PTB3,
+ A5 = PTB2,
+ A6 = PTD5,
+ A7 = PTD6,
+ A8 = PTC1,
+ A9 = PTC2,
+
+ I2C_SCL = PTB3,
+ I2C_SDA = PTB2,
+
+ SPI_SCK = PTC5, // sclk
+ SPI_DOUT = PTC6, // mosi
+ SPI_DIN = PTC7, // miso
+ SPI_CS = PTC4, // ssel
+
+ SERIAL_TX = PTB17,
+ SERIAL_RX = PTB16,
+
+ PWM = PTD7,
+
+ DAC = DAC0_OUT,
+
+ TSI_ELEC0 = PTC1,
+ TSI_ELEC1 = PTC2,
+
+ // Not connected
+ NC = (int)0xFFFFFFFF
+} PinName;
+
+
+typedef enum {
+ PullNone = 0,
+ PullDown = 2,
+ PullUp = 3,
+ PullDefault = PullUp
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_TEENSY3_1/TARGET_Freescale/TARGET_K20XX/TARGET_TEENSY3_1/device.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,58 @@ +/* mbed Microcontroller Library + * Copyright (c) 2006-2015 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_DEVICE_H +#define MBED_DEVICE_H + +#define DEVICE_PORTIN 1 +#define DEVICE_PORTOUT 1 +#define DEVICE_PORTINOUT 1 + +#define DEVICE_INTERRUPTIN 1 + +#define DEVICE_ANALOGIN 1 +#define DEVICE_ANALOGOUT 1 + +#define DEVICE_SERIAL 1 + +#define DEVICE_I2C 1 +#define DEVICE_I2CSLAVE 1 + +#define DEVICE_SPI 1 +#define DEVICE_SPISLAVE 1 + +#define DEVICE_CAN 0 + +#define DEVICE_RTC 1 + +#define DEVICE_ETHERNET 0 + +#define DEVICE_PWMOUT 1 + +#define DEVICE_SEMIHOST 1 +#define DEVICE_LOCALFILESYSTEM 0 +#define DEVICE_ID_LENGTH 24 + +#define DEVICE_SLEEP 1 + +#define DEVICE_DEBUG_AWARENESS 0 + +#define DEVICE_STDIO_MESSAGES 1 + +#define DEVICE_ERROR_RED 1 + +#include "objects.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_TEENSY3_1/TARGET_Freescale/TARGET_K20XX/clk_freqs.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,115 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef CLK_FREQS_H
+#define CLK_FREQS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*!
+ * \brief Get the peripheral bus clock frequency
+ * \return Bus frequency
+ */
+static inline uint32_t bus_frequency(void) {
+ return SystemCoreClock / (((SIM->CLKDIV1 & SIM_CLKDIV1_OUTDIV2_MASK) >> SIM_CLKDIV1_OUTDIV2_SHIFT) + 1);
+}
+
+/*!
+ * \brief Get external oscillator (crystal) frequency
+ * \return External osc frequency
+ */
+static uint32_t extosc_frequency(void) {
+ uint32_t MCGClock = SystemCoreClock * (1u + ((SIM->CLKDIV1 & SIM_CLKDIV1_OUTDIV1_MASK) >> SIM_CLKDIV1_OUTDIV1_SHIFT));
+
+ if ((MCG->C1 & MCG_C1_CLKS_MASK) == MCG_C1_CLKS(2)) //MCG clock = external reference clock
+ return MCGClock;
+
+ if ((MCG->C1 & MCG_C1_CLKS_MASK) == MCG_C1_CLKS(0)) { //PLL/FLL is selected
+ uint32_t divider, multiplier;
+ if ((MCG->C6 & MCG_C6_PLLS_MASK) == 0x0u) { //FLL is selected
+ if ((MCG->S & MCG_S_IREFST_MASK) == 0x0u) { //FLL uses external reference
+ divider = (uint8_t)(1u << ((MCG->C1 & MCG_C1_FRDIV_MASK) >> MCG_C1_FRDIV_SHIFT));
+ if ((MCG->C2 & MCG_C2_RANGE0_MASK) != 0x0u)
+ divider <<= 5u;
+ /* Select correct multiplier to calculate the MCG output clock */
+ switch (MCG->C4 & (MCG_C4_DMX32_MASK | MCG_C4_DRST_DRS_MASK)) {
+ case 0x0u:
+ multiplier = 640u;
+ break;
+ case 0x20u:
+ multiplier = 1280u;
+ break;
+ case 0x40u:
+ multiplier = 1920u;
+ break;
+ case 0x60u:
+ multiplier = 2560u;
+ break;
+ case 0x80u:
+ multiplier = 732u;
+ break;
+ case 0xA0u:
+ multiplier = 1464u;
+ break;
+ case 0xC0u:
+ multiplier = 2197u;
+ break;
+ case 0xE0u:
+ default:
+ multiplier = 2929u;
+ break;
+ }
+
+ return MCGClock * divider / multiplier;
+ }
+ } else { //PLL is selected
+ divider = (1u + (MCG->C5 & MCG_C5_PRDIV0_MASK));
+ multiplier = ((MCG->C6 & MCG_C6_VDIV0_MASK) + 24u);
+ return MCGClock * divider / multiplier;
+ }
+ }
+
+ //In all other cases either there is no crystal or we cannot determine it
+ //For example when the FLL is running on the internal reference, and there is also an
+ //external crystal. However these are unlikely situations
+ return 0;
+}
+
+//Get MCG PLL/2 or FLL frequency, depending on which one is active, sets PLLFLLSEL bit
+static uint32_t mcgpllfll_frequency(void) {
+ if ((MCG->C1 & MCG_C1_CLKS_MASK) != MCG_C1_CLKS(0)) //PLL/FLL is not selected
+ return 0;
+
+ uint32_t MCGClock = SystemCoreClock * (1u + ((SIM->CLKDIV1 & SIM_CLKDIV1_OUTDIV1_MASK) >> SIM_CLKDIV1_OUTDIV1_SHIFT));
+ if ((MCG->C6 & MCG_C6_PLLS_MASK) == 0x0u) { //FLL is selected
+ SIM->SOPT2 &= ~SIM_SOPT2_PLLFLLSEL_MASK; //MCG peripheral clock is FLL output
+ return MCGClock;
+ } else { //PLL is selected
+ SIM->SOPT2 |= SIM_SOPT2_PLLFLLSEL_MASK; //MCG peripheral clock is PLL output
+ return MCGClock;
+ }
+
+ //It is possible the SystemCoreClock isn't running on the PLL, and the PLL is still active
+ //for the peripherals, this is however an unlikely setup
+}
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_TEENSY3_1/TARGET_Freescale/TARGET_K20XX/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,56 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_GPIO_OBJECT_H
+#define MBED_GPIO_OBJECT_H
+
+#include "mbed_assert.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct {
+ PinName pin;
+ uint32_t mask;
+ __IO uint32_t *reg_dir;
+ __IO uint32_t *reg_set;
+ __IO uint32_t *reg_clr;
+ __I uint32_t *reg_in;
+} gpio_t;
+
+static inline void gpio_write(gpio_t *obj, int value) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ if (value) {
+ *obj->reg_set = obj->mask;
+ } else {
+ *obj->reg_clr = obj->mask;
+ }
+}
+
+static inline int gpio_read(gpio_t *obj) {
+ MBED_ASSERT(obj->pin != (PinName)NC);
+ return ((*obj->reg_in & obj->mask) ? 1 : 0);
+}
+
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_TEENSY3_1/TARGET_Freescale/TARGET_K20XX/objects.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,77 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+ uint32_t port;
+ uint32_t pin;
+ uint32_t ch;
+};
+
+struct port_s {
+ __IO uint32_t *reg_dir;
+ __IO uint32_t *reg_out;
+ __I uint32_t *reg_in;
+ PortName port;
+ uint32_t mask;
+};
+
+struct pwmout_s {
+ __IO uint32_t *MOD;
+ __IO uint32_t *CNT;
+ __IO uint32_t *CnV;
+};
+
+struct serial_s {
+ UART_Type *uart;
+ int index;
+};
+
+struct analogin_s {
+ ADCName adc;
+};
+
+#if DEVICE_ANALOGOUT
+struct dac_s {
+ DACName dac;
+};
+#endif
+
+struct i2c_s {
+ I2C_Type *i2c;
+};
+
+struct spi_s {
+ SPI_Type *spi;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_TEENSY3_1/TOOLCHAIN_ARM_STD/MK20DX256.sct Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,13 @@
+
+LR_IROM1 0x00000000 0x40000 { ; load region size_region (256k)
+ ER_IROM1 0x00000000 0x40000 { ; load address = execution address
+ *.o (RESET, +First)
+ *(InRoot$$Sections)
+ .ANY (+RO)
+ }
+ ; 8_byte_aligned(112 vect * 4 bytes) = 8_byte_aligned(0x1C0) = 0x1C0
+ ; 0x10000 - 0x1C0 = 0xFE40
+ RW_IRAM1 0x1FFF81C0 0xFE40 {
+ .ANY (+RW +ZI)
+ }
+}
Binary file TARGET_TEENSY3_1/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_TEENSY3_1/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_TEENSY3_1/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_TEENSY3_1/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_TEENSY3_1/TOOLCHAIN_ARM_STD/startup_MK20DX256.o has changed
Binary file TARGET_TEENSY3_1/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_TEENSY3_1/TOOLCHAIN_ARM_STD/system_MK20DX256.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_TEENSY3_1/TOOLCHAIN_GCC_ARM/MK20DX256.ld Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,163 @@
+/*
+ * K20DX256 ARM GCC linker script file
+ */
+
+MEMORY
+{
+ VECTORS (rx) : ORIGIN = 0x00000000, LENGTH = 0x00000400
+ FLASH_PROTECTION (rx) : ORIGIN = 0x00000400, LENGTH = 0x00000010
+ FLASH (rx) : ORIGIN = 0x00000410, LENGTH = 256K - 0x00000410
+ RAM (rwx) : ORIGIN = 0x1FFF81C0, LENGTH = 64K - 0x1C0
+}
+
+/* Linker script to place sections and symbol values. Should be used together
+ * with other linker script that defines memory regions FLASH and RAM.
+ * It references following symbols, which must be defined in code:
+ * _reset_init : Entry of reset handler
+ *
+ * It defines following symbols, which code can use without definition:
+ * __exidx_start
+ * __exidx_end
+ * __etext
+ * __data_start__
+ * __preinit_array_start
+ * __preinit_array_end
+ * __init_array_start
+ * __init_array_end
+ * __fini_array_start
+ * __fini_array_end
+ * __data_end__
+ * __bss_start__
+ * __bss_end__
+ * __end__
+ * end
+ * __HeapLimit
+ * __StackLimit
+ * __StackTop
+ * __stack
+ */
+ENTRY(Reset_Handler)
+
+SECTIONS
+{
+ .isr_vector :
+ {
+ __vector_table = .;
+ KEEP(*(.vector_table))
+ *(.text.Reset_Handler)
+ *(.text.System_Init)
+ . = ALIGN(4);
+ } > VECTORS
+
+ .flash_protect :
+ {
+ KEEP(*(.kinetis_flash_config_field))
+ . = ALIGN(4);
+ } > FLASH_PROTECTION
+
+ .text :
+ {
+ *(.text*)
+
+ KEEP(*(.init))
+ KEEP(*(.fini))
+
+ /* .ctors */
+ *crtbegin.o(.ctors)
+ *crtbegin?.o(.ctors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
+ *(SORT(.ctors.*))
+ *(.ctors)
+
+ /* .dtors */
+ *crtbegin.o(.dtors)
+ *crtbegin?.o(.dtors)
+ *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
+ *(SORT(.dtors.*))
+ *(.dtors)
+
+ *(.rodata*)
+
+ KEEP(*(.eh_frame*))
+ } > FLASH
+
+ .ARM.extab :
+ {
+ *(.ARM.extab* .gnu.linkonce.armextab.*)
+ } > FLASH
+
+ __exidx_start = .;
+ .ARM.exidx :
+ {
+ *(.ARM.exidx* .gnu.linkonce.armexidx.*)
+ } > FLASH
+ __exidx_end = .;
+
+ __etext = .;
+
+ .data : AT (__etext)
+ {
+ __data_start__ = .;
+ *(vtable)
+ *(.data*)
+
+ . = ALIGN(4);
+ /* preinit data */
+ PROVIDE_HIDDEN (__preinit_array_start = .);
+ KEEP(*(.preinit_array))
+ PROVIDE_HIDDEN (__preinit_array_end = .);
+
+ . = ALIGN(4);
+ /* init data */
+ PROVIDE_HIDDEN (__init_array_start = .);
+ KEEP(*(SORT(.init_array.*)))
+ KEEP(*(.init_array))
+ PROVIDE_HIDDEN (__init_array_end = .);
+
+
+ . = ALIGN(4);
+ /* finit data */
+ PROVIDE_HIDDEN (__fini_array_start = .);
+ KEEP(*(SORT(.fini_array.*)))
+ KEEP(*(.fini_array))
+ PROVIDE_HIDDEN (__fini_array_end = .);
+
+ . = ALIGN(4);
+ /* All data end */
+ __data_end__ = .;
+
+ } > RAM
+
+ .bss :
+ {
+ __bss_start__ = .;
+ *(.bss*)
+ *(COMMON)
+ __bss_end__ = .;
+ } > RAM
+
+ .heap :
+ {
+ __end__ = .;
+ end = __end__;
+ *(.heap*)
+ __HeapLimit = .;
+ } > RAM
+
+ /* .stack_dummy section doesn't contains any symbols. It is only
+ * used for linker to calculate size of stack sections, and assign
+ * values to stack symbols later */
+ .stack_dummy :
+ {
+ *(.stack)
+ } > RAM
+
+ /* Set stack top to end of RAM, and stack limit move down by
+ * size of stack_dummy section */
+ __StackTop = ORIGIN(RAM) + LENGTH(RAM);
+ __StackLimit = __StackTop - SIZEOF(.stack_dummy);
+ PROVIDE(__stack = __StackTop);
+
+ /* Check if data + heap + stack exceeds RAM limit */
+ ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
+}
Binary file TARGET_TEENSY3_1/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_TEENSY3_1/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_TEENSY3_1/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_TEENSY3_1/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_TEENSY3_1/TOOLCHAIN_GCC_ARM/startup_MK20DX256.o has changed
Binary file TARGET_TEENSY3_1/TOOLCHAIN_GCC_ARM/system_MK20DX256.o has changed
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_TEENSY3_1/cmsis.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,13 @@ +/* mbed Microcontroller Library - CMSIS + * Copyright (C) 2009-2015 ARM Limited. All rights reserved. + * + * A generic CMSIS include header, pulling in LPC11U24 specifics + */ + +#ifndef MBED_CMSIS_H +#define MBED_CMSIS_H + +#include "MK20DX256.h" +#include "cmsis_nvic.h" + +#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_TEENSY3_1/cmsis_nvic.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,51 @@
+/* mbed Microcontroller Library
+ * CMSIS-style functionality to support dynamic vectors
+ *******************************************************************************
+ * Copyright (c) 2015 ARM Limited. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of ARM Limited nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#ifndef MBED_CMSIS_NVIC_H
+#define MBED_CMSIS_NVIC_H
+
+#define NVIC_NUM_VECTORS (16 + 95) // CORE + MCU Peripherals
+#define NVIC_USER_IRQ_OFFSET 16
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+void NVIC_SetVector(IRQn_Type IRQn, uint32_t vector);
+uint32_t NVIC_GetVector(IRQn_Type IRQn);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_TEENSY3_1/core_ca9.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,271 @@
+/**************************************************************************//**
+ * @file core_ca9.h
+ * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File
+ * @version
+ * @date 25 March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CA9_H_GENERIC
+#define __CORE_CA9_H_GENERIC
+
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_A9
+ @{
+ */
+
+/* CMSIS CA9 definitions */
+#define __CA9_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CA9_CMSIS_VERSION_SUB (0x10) /*!< [15:0] CMSIS HAL sub version */
+#define __CA9_CMSIS_VERSION ((__CA9_CMSIS_VERSION_MAIN << 16) | \
+ __CA9_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_A (0x09) /*!< Cortex-A Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+ #define __STATIC_ASM static __asm
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /*!< standard types definitions */
+#include "core_caInstr.h" /*!< Core Instruction Access */
+#include "core_caFunc.h" /*!< Core Function Access */
+#include "core_cm4_simd.h" /*!< Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CA9_H_DEPENDANT
+#define __CORE_CA9_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CA9_REV
+ #define __CA9_REV 0x0000
+ #warning "__CA9_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 1
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 1
+ #endif
+
+ #if __Vendor_SysTickConfig == 0
+ #error "__Vendor_SysTickConfig set to 0, but vendor systick timer must be supplied for Cortex-A9"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_A9 */
+
+
+/*******************************************************************************
+ * Register Abstraction
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-A processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t reserved1:7; /*!< bit: 20..23 Reserved */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/*@} end of group CMSIS_CORE */
+
+/*@} end of CMSIS_Core_FPUFunctions */
+
+
+#endif /* __CORE_CA9_H_GENERIC */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+
+
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_TEENSY3_1/core_caFunc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,592 @@
+/**************************************************************************//**
+ * @file core_caFunc.h
+ * @brief CMSIS Cortex-A Core Function Access Header File
+ * @version V3.10
+ * @date 9 May 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2012 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CAFUNC_H__
+#define __CORE_CAFUNC_H__
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+#define MODE_USR 0x10
+#define MODE_FIQ 0x11
+#define MODE_IRQ 0x12
+#define MODE_SVC 0x13
+#define MODE_MON 0x16
+#define MODE_ABT 0x17
+#define MODE_HYP 0x1A
+#define MODE_UND 0x1B
+#define MODE_SYS 0x1F
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get CPSR Register
+
+ This function returns the content of the CPSR Register.
+
+ \return CPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_CPSR(void)
+{
+ register uint32_t __regCPSR __ASM("cpsr");
+ return(__regCPSR);
+}
+
+/** \brief Set Stack Pointer
+
+ This function assigns the given value to the current stack pointer.
+
+ \param [in] topOfStack Stack Pointer value to set
+ */
+register uint32_t __regSP __ASM("sp");
+__STATIC_INLINE void __set_SP(uint32_t topOfStack)
+{
+ __regSP = topOfStack;
+}
+
+
+/** \brief Get link register
+
+ This function returns the value of the link register
+
+ \return Value of link register
+ */
+register uint32_t __reglr __ASM("lr");
+__STATIC_INLINE uint32_t __get_LR(void)
+{
+ return(__reglr);
+}
+
+/** \brief Set link register
+
+ This function sets the value of the link register
+
+ \param [in] lr LR value to set
+ */
+__STATIC_INLINE void __set_LR(uint32_t lr)
+{
+ __reglr = lr;
+}
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the USR/SYS Stack Pointer (PSP).
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_PSP(uint32_t topOfProcStack)
+{
+ ARM
+ PRESERVE8
+
+ BIC R0, R0, #7 ;ensure stack is 8-byte aligned
+ MRS R1, CPSR
+ CPS #MODE_SYS ;no effect in USR mode
+ MOV SP, R0
+ MSR CPSR_c, R1 ;no effect in USR mode
+ ISB
+ BX LR
+
+}
+
+/** \brief Set User Mode
+
+ This function changes the processor state to User Mode
+
+ \param [in] topOfProcStack USR/SYS Stack Pointer value to set
+ */
+__STATIC_ASM void __set_CPS_USR(void)
+{
+ ARM
+
+ CPS #MODE_USR
+ BX LR
+}
+
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+/** \brief Get FPEXC
+
+ This function returns the current value of the Floating Point Exception Control register.
+
+ \return Floating Point Exception Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPEXC(void)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ return(__regfpexc);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPEXC
+
+ This function assigns the given value to the Floating Point Exception Control register.
+
+ \param [in] fpscr Floating Point Exception Control value to set
+ */
+__STATIC_INLINE void __set_FPEXC(uint32_t fpexc)
+{
+#if (__FPU_PRESENT == 1)
+ register uint32_t __regfpexc __ASM("fpexc");
+ __regfpexc = (fpexc);
+#endif
+}
+
+/** \brief Get CPACR
+
+ This function returns the current value of the Coprocessor Access Control register.
+
+ \return Coprocessor Access Control register value
+ */
+__STATIC_INLINE uint32_t __get_CPACR(void)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ return __regCPACR;
+}
+
+/** \brief Set CPACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] cpacr Coporcessor Acccess Control value to set
+ */
+__STATIC_INLINE void __set_CPACR(uint32_t cpacr)
+{
+ register uint32_t __regCPACR __ASM("cp15:0:c1:c0:2");
+ __regCPACR = cpacr;
+ __ISB();
+}
+
+/** \brief Get CBAR
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Configuration Base Address register value
+ */
+__STATIC_INLINE uint32_t __get_CBAR() {
+ register uint32_t __regCBAR __ASM("cp15:4:c15:c0:0");
+ return(__regCBAR);
+}
+
+/** \brief Get TTBR0
+
+ This function returns the value of the Configuration Base Address register.
+
+ \return Translation Table Base Register 0 value
+ */
+__STATIC_INLINE uint32_t __get_TTBR0() {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ return(__regTTBR0);
+}
+
+/** \brief Set TTBR0
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] ttbr0 Translation Table Base Register 0 value to set
+ */
+__STATIC_INLINE void __set_TTBR0(uint32_t ttbr0) {
+ register uint32_t __regTTBR0 __ASM("cp15:0:c2:c0:0");
+ __regTTBR0 = ttbr0;
+ __ISB();
+}
+
+/** \brief Get DACR
+
+ This function returns the value of the Domain Access Control Register.
+
+ \return Domain Access Control Register value
+ */
+__STATIC_INLINE uint32_t __get_DACR() {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ return(__regDACR);
+}
+
+/** \brief Set DACR
+
+ This function assigns the given value to the Coprocessor Access Control register.
+
+ \param [in] dacr Domain Access Control Register value to set
+ */
+__STATIC_INLINE void __set_DACR(uint32_t dacr) {
+ register uint32_t __regDACR __ASM("cp15:0:c3:c0:0");
+ __regDACR = dacr;
+ __ISB();
+}
+
+/******************************** Cache and BTAC enable ****************************************************/
+
+/** \brief Set SCTLR
+
+ This function assigns the given value to the System Control Register.
+
+ \param [in] sctlr System Control Register, value to set
+ */
+__STATIC_INLINE void __set_SCTLR(uint32_t sctlr)
+{
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ __regSCTLR = sctlr;
+}
+
+/** \brief Get SCTLR
+
+ This function returns the value of the System Control Register.
+
+ \return System Control Register value
+ */
+__STATIC_INLINE uint32_t __get_SCTLR() {
+ register uint32_t __regSCTLR __ASM("cp15:0:c1:c0:0");
+ return(__regSCTLR);
+}
+
+/** \brief Enable Caches
+
+ Enable Caches
+ */
+__STATIC_INLINE void __enable_caches(void) {
+ // Set I bit 12 to enable I Cache
+ // Set C bit 2 to enable D Cache
+ __set_SCTLR( __get_SCTLR() | (1 << 12) | (1 << 2));
+}
+
+/** \brief Disable Caches
+
+ Disable Caches
+ */
+__STATIC_INLINE void __disable_caches(void) {
+ // Clear I bit 12 to disable I Cache
+ // Clear C bit 2 to disable D Cache
+ __set_SCTLR( __get_SCTLR() & ~(1 << 12) & ~(1 << 2));
+ __ISB();
+}
+
+/** \brief Enable BTAC
+
+ Enable BTAC
+ */
+__STATIC_INLINE void __enable_btac(void) {
+ // Set Z bit 11 to enable branch prediction
+ __set_SCTLR( __get_SCTLR() | (1 << 11));
+ __ISB();
+}
+
+/** \brief Disable BTAC
+
+ Disable BTAC
+ */
+__STATIC_INLINE void __disable_btac(void) {
+ // Clear Z bit 11 to disable branch prediction
+ __set_SCTLR( __get_SCTLR() & ~(1 << 11));
+}
+
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __enable_mmu(void) {
+ // Set M bit 0 to enable the MMU
+ // Set AFE bit to enable simplified access permissions model
+ // Clear TRE bit to disable TEX remap and A bit to disable strict alignment fault checking
+ __set_SCTLR( (__get_SCTLR() & ~(1 << 28) & ~(1 << 1)) | 1 | (1 << 29));
+ __ISB();
+}
+
+/** \brief Enable MMU
+
+ Enable MMU
+ */
+__STATIC_INLINE void __disable_mmu(void) {
+ // Clear M bit 0 to disable the MMU
+ __set_SCTLR( __get_SCTLR() & ~1);
+ __ISB();
+}
+
+/******************************** TLB maintenance operations ************************************************/
+/** \brief Invalidate the whole tlb
+
+ TLBIALL. Invalidate the whole tlb
+ */
+
+__STATIC_INLINE void __ca9u_inv_tlb_all(void) {
+ register uint32_t __TLBIALL __ASM("cp15:0:c8:c7:0");
+ __TLBIALL = 0;
+ __DSB();
+ __ISB();
+}
+
+/******************************** BTB maintenance operations ************************************************/
+/** \brief Invalidate entire branch predictor array
+
+ BPIALL. Branch Predictor Invalidate All.
+ */
+
+__STATIC_INLINE void __v7_inv_btac(void) {
+ register uint32_t __BPIALL __ASM("cp15:0:c7:c5:6");
+ __BPIALL = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new state
+}
+
+
+/******************************** L1 cache operations ******************************************************/
+
+/** \brief Invalidate the whole I$
+
+ ICIALLU. Instruction Cache Invalidate All to PoU
+ */
+__STATIC_INLINE void __v7_inv_icache_all(void) {
+ register uint32_t __ICIALLU __ASM("cp15:0:c7:c5:0");
+ __ICIALLU = 0;
+ __DSB(); //ensure completion of the invalidation
+ __ISB(); //ensure instruction fetch path sees new I cache state
+}
+
+/** \brief Clean D$ by MVA
+
+ DCCMVAC. Data cache clean by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_dcache_mva(void *va) {
+ register uint32_t __DCCMVAC __ASM("cp15:0:c7:c10:1");
+ __DCCMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Invalidate D$ by MVA
+
+ DCIMVAC. Data cache invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_inv_dcache_mva(void *va) {
+ register uint32_t __DCIMVAC __ASM("cp15:0:c7:c6:1");
+ __DCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief Clean and Invalidate D$ by MVA
+
+ DCCIMVAC. Data cache clean and invalidate by MVA to PoC
+ */
+__STATIC_INLINE void __v7_clean_inv_dcache_mva(void *va) {
+ register uint32_t __DCCIMVAC __ASM("cp15:0:c7:c14:1");
+ __DCCIMVAC = (uint32_t)va;
+ __DMB(); //ensure the ordering of data cache maintenance operations and their effects
+}
+
+/** \brief
+ * Generic mechanism for cleaning/invalidating the entire data or unified cache to the point of coherency.
+ */
+#pragma push
+#pragma arm
+__STATIC_ASM void __v7_all_cache(uint32_t op) {
+ ARM
+
+ PUSH {R4-R11}
+
+ MRC p15, 1, R6, c0, c0, 1 // Read CLIDR
+ ANDS R3, R6, #0x07000000 // Extract coherency level
+ MOV R3, R3, LSR #23 // Total cache levels << 1
+ BEQ Finished // If 0, no need to clean
+
+ MOV R10, #0 // R10 holds current cache level << 1
+Loop1 ADD R2, R10, R10, LSR #1 // R2 holds cache "Set" position
+ MOV R1, R6, LSR R2 // Bottom 3 bits are the Cache-type for this level
+ AND R1, R1, #7 // Isolate those lower 3 bits
+ CMP R1, #2
+ BLT Skip // No cache or only instruction cache at this level
+
+ MCR p15, 2, R10, c0, c0, 0 // Write the Cache Size selection register
+ ISB // ISB to sync the change to the CacheSizeID reg
+ MRC p15, 1, R1, c0, c0, 0 // Reads current Cache Size ID register
+ AND R2, R1, #7 // Extract the line length field
+ ADD R2, R2, #4 // Add 4 for the line length offset (log2 16 bytes)
+ LDR R4, =0x3FF
+ ANDS R4, R4, R1, LSR #3 // R4 is the max number on the way size (right aligned)
+ CLZ R5, R4 // R5 is the bit position of the way size increment
+ LDR R7, =0x7FFF
+ ANDS R7, R7, R1, LSR #13 // R7 is the max number of the index size (right aligned)
+
+Loop2 MOV R9, R4 // R9 working copy of the max way size (right aligned)
+
+Loop3 ORR R11, R10, R9, LSL R5 // Factor in the Way number and cache number into R11
+ ORR R11, R11, R7, LSL R2 // Factor in the Set number
+ CMP R0, #0
+ BNE Dccsw
+ MCR p15, 0, R11, c7, c6, 2 // DCISW. Invalidate by Set/Way
+ B cont
+Dccsw CMP R0, #1
+ BNE Dccisw
+ MCR p15, 0, R11, c7, c10, 2 // DCCSW. Clean by Set/Way
+ B cont
+Dccisw MCR p15, 0, R11, c7, c14, 2 // DCCISW, Clean and Invalidate by Set/Way
+cont SUBS R9, R9, #1 // Decrement the Way number
+ BGE Loop3
+ SUBS R7, R7, #1 // Decrement the Set number
+ BGE Loop2
+Skip ADD R10, R10, #2 // increment the cache number
+ CMP R3, R10
+ BGT Loop1
+
+Finished
+ DSB
+ POP {R4-R11}
+ BX lr
+
+}
+#pragma pop
+
+/** \brief __v7_all_cache - helper function
+
+ */
+
+/** \brief Invalidate the whole D$
+
+ DCISW. Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_inv_dcache_all(void) {
+ __v7_all_cache(0);
+}
+
+/** \brief Clean the whole D$
+
+ DCCSW. Clean by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_dcache_all(void) {
+ __v7_all_cache(1);
+}
+
+/** \brief Clean and invalidate the whole D$
+
+ DCCISW. Clean and Invalidate by Set/Way
+ */
+
+__STATIC_INLINE void __v7_clean_inv_dcache_all(void) {
+ __v7_all_cache(2);
+}
+
+#include "core_ca_mmu.h"
+
+#elif (defined (__ICCARM__)) /*---------------- ICC Compiler ---------------------*/
+
+#error IAR Compiler support not implemented for Cortex-A
+
+#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/
+
+//#error GNU Compiler support not implemented for Cortex-A
+
+#elif (defined (__TASKING__)) /*--------------- TASKING Compiler -----------------*/
+
+#error TASKING Compiler support not implemented for Cortex-A
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CAFUNC_H__ */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_TEENSY3_1/core_caInstr.h Tue Feb 03 15:31:20 2015 +0000 @@ -0,0 +1,45 @@ +/**************************************************************************//** + * @file core_caInstr.h + * @brief CMSIS Cortex-A9 Core Peripheral Access Layer Header File + * @version + * @date 04. December 2012 + * + * @note + * + ******************************************************************************/ +/* Copyright (c) 2009 - 2012 ARM LIMITED + + All rights reserved. + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + - Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + - Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + - Neither the name of ARM nor the names of its contributors may be used + to endorse or promote products derived from this software without + specific prior written permission. + * + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + ---------------------------------------------------------------------------*/ + +#ifndef __CORE_CAINSTR_H__ +#define __CORE_CAINSTR_H__ + +#define __CORTEX_M 0x3 +#include "core_cmInstr.h" +#undef __CORTEX_M + +#endif +
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_TEENSY3_1/core_ca_mmu.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,848 @@
+;/**************************************************************************//**
+; * @file core_ca_mmu.h
+; * @brief MMU Startup File for
+; * VE_A9_MP Device Series
+; * @version V1.01
+; * @date 25 March 2013
+; *
+; * @note
+; *
+; ******************************************************************************/
+;/* Copyright (c) 2012 ARM LIMITED
+;
+; All rights reserved.
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+; - Redistributions of source code must retain the above copyright
+; notice, this list of conditions and the following disclaimer.
+; - Redistributions in binary form must reproduce the above copyright
+; notice, this list of conditions and the following disclaimer in the
+; documentation and/or other materials provided with the distribution.
+; - Neither the name of ARM nor the names of its contributors may be used
+; to endorse or promote products derived from this software without
+; specific prior written permission.
+; *
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+; ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+; LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+; CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+; SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+; INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+; CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+; ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+; POSSIBILITY OF SUCH DAMAGE.
+; ---------------------------------------------------------------------------*/
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef _MMU_FUNC_H
+#define _MMU_FUNC_H
+
+#define SECTION_DESCRIPTOR (0x2)
+#define SECTION_MASK (0xFFFFFFFC)
+
+#define SECTION_TEXCB_MASK (0xFFFF8FF3)
+#define SECTION_B_SHIFT (2)
+#define SECTION_C_SHIFT (3)
+#define SECTION_TEX0_SHIFT (12)
+#define SECTION_TEX1_SHIFT (13)
+#define SECTION_TEX2_SHIFT (14)
+
+#define SECTION_XN_MASK (0xFFFFFFEF)
+#define SECTION_XN_SHIFT (4)
+
+#define SECTION_DOMAIN_MASK (0xFFFFFE1F)
+#define SECTION_DOMAIN_SHIFT (5)
+
+#define SECTION_P_MASK (0xFFFFFDFF)
+#define SECTION_P_SHIFT (9)
+
+#define SECTION_AP_MASK (0xFFFF73FF)
+#define SECTION_AP_SHIFT (10)
+#define SECTION_AP2_SHIFT (15)
+
+#define SECTION_S_MASK (0xFFFEFFFF)
+#define SECTION_S_SHIFT (16)
+
+#define SECTION_NG_MASK (0xFFFDFFFF)
+#define SECTION_NG_SHIFT (17)
+
+#define SECTION_NS_MASK (0xFFF7FFFF)
+#define SECTION_NS_SHIFT (19)
+
+
+#define PAGE_L1_DESCRIPTOR (0x1)
+#define PAGE_L1_MASK (0xFFFFFFFC)
+
+#define PAGE_L2_4K_DESC (0x2)
+#define PAGE_L2_4K_MASK (0xFFFFFFFD)
+
+#define PAGE_L2_64K_DESC (0x1)
+#define PAGE_L2_64K_MASK (0xFFFFFFFC)
+
+#define PAGE_4K_TEXCB_MASK (0xFFFFFE33)
+#define PAGE_4K_B_SHIFT (2)
+#define PAGE_4K_C_SHIFT (3)
+#define PAGE_4K_TEX0_SHIFT (6)
+#define PAGE_4K_TEX1_SHIFT (7)
+#define PAGE_4K_TEX2_SHIFT (8)
+
+#define PAGE_64K_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_64K_B_SHIFT (2)
+#define PAGE_64K_C_SHIFT (3)
+#define PAGE_64K_TEX0_SHIFT (12)
+#define PAGE_64K_TEX1_SHIFT (13)
+#define PAGE_64K_TEX2_SHIFT (14)
+
+#define PAGE_TEXCB_MASK (0xFFFF8FF3)
+#define PAGE_B_SHIFT (2)
+#define PAGE_C_SHIFT (3)
+#define PAGE_TEX_SHIFT (12)
+
+#define PAGE_XN_4K_MASK (0xFFFFFFFE)
+#define PAGE_XN_4K_SHIFT (0)
+#define PAGE_XN_64K_MASK (0xFFFF7FFF)
+#define PAGE_XN_64K_SHIFT (15)
+
+
+#define PAGE_DOMAIN_MASK (0xFFFFFE1F)
+#define PAGE_DOMAIN_SHIFT (5)
+
+#define PAGE_P_MASK (0xFFFFFDFF)
+#define PAGE_P_SHIFT (9)
+
+#define PAGE_AP_MASK (0xFFFFFDCF)
+#define PAGE_AP_SHIFT (4)
+#define PAGE_AP2_SHIFT (9)
+
+#define PAGE_S_MASK (0xFFFFFBFF)
+#define PAGE_S_SHIFT (10)
+
+#define PAGE_NG_MASK (0xFFFFF7FF)
+#define PAGE_NG_SHIFT (11)
+
+#define PAGE_NS_MASK (0xFFFFFFF7)
+#define PAGE_NS_SHIFT (3)
+
+#define OFFSET_1M (0x00100000)
+#define OFFSET_64K (0x00010000)
+#define OFFSET_4K (0x00001000)
+
+#define DESCRIPTOR_FAULT (0x00000000)
+
+/* ########################### MMU Function Access ########################### */
+/** \ingroup MMU_FunctionInterface
+ \defgroup MMU_Functions MMU Functions Interface
+ @{
+ */
+
+/* Attributes enumerations */
+
+/* Region size attributes */
+typedef enum
+{
+ SECTION,
+ PAGE_4k,
+ PAGE_64k,
+} mmu_region_size_Type;
+
+/* Region type attributes */
+typedef enum
+{
+ NORMAL,
+ DEVICE,
+ SHARED_DEVICE,
+ NON_SHARED_DEVICE,
+ STRONGLY_ORDERED
+} mmu_memory_Type;
+
+/* Region cacheability attributes */
+typedef enum
+{
+ NON_CACHEABLE,
+ WB_WA,
+ WT,
+ WB_NO_WA,
+} mmu_cacheability_Type;
+
+/* Region parity check attributes */
+typedef enum
+{
+ ECC_DISABLED,
+ ECC_ENABLED,
+} mmu_ecc_check_Type;
+
+/* Region execution attributes */
+typedef enum
+{
+ EXECUTE,
+ NON_EXECUTE,
+} mmu_execute_Type;
+
+/* Region global attributes */
+typedef enum
+{
+ GLOBAL,
+ NON_GLOBAL,
+} mmu_global_Type;
+
+/* Region shareability attributes */
+typedef enum
+{
+ NON_SHARED,
+ SHARED,
+} mmu_shared_Type;
+
+/* Region security attributes */
+typedef enum
+{
+ SECURE,
+ NON_SECURE,
+} mmu_secure_Type;
+
+/* Region access attributes */
+typedef enum
+{
+ NO_ACCESS,
+ RW,
+ READ,
+} mmu_access_Type;
+
+/* Memory Region definition */
+typedef struct RegionStruct {
+ mmu_region_size_Type rg_t;
+ mmu_memory_Type mem_t;
+ uint8_t domain;
+ mmu_cacheability_Type inner_norm_t;
+ mmu_cacheability_Type outer_norm_t;
+ mmu_ecc_check_Type e_t;
+ mmu_execute_Type xn_t;
+ mmu_global_Type g_t;
+ mmu_secure_Type sec_t;
+ mmu_access_Type priv_t;
+ mmu_access_Type user_t;
+ mmu_shared_Type sh_t;
+
+} mmu_region_attributes_Type;
+
+/** \brief Set section execution-never attribute
+
+ The function sets section execution-never attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] xn Section execution-never attribute : EXECUTE , NON_EXECUTE.
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_section(uint32_t *descriptor_l1, mmu_execute_Type xn)
+{
+ *descriptor_l1 &= SECTION_XN_MASK;
+ *descriptor_l1 |= ((xn & 0x1) << SECTION_XN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section domain
+
+ The function sets section domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Section domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_section(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= SECTION_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xF) << SECTION_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set section parity check
+
+ The function sets section parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_section(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set section access privileges
+
+ The function sets section access privileges
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_section(uint32_t *descriptor_l1, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x6; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l1 &= SECTION_AP_MASK;
+ *descriptor_l1 |= (ap & 0x3) << SECTION_AP_SHIFT;
+ *descriptor_l1 |= ((ap & 0x4)>>2) << SECTION_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set section shareability
+
+ The function sets section shareability
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_section(uint32_t *descriptor_l1, mmu_shared_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_S_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Global attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] g_bit Section attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_section(uint32_t *descriptor_l1, mmu_global_Type g_bit)
+{
+ *descriptor_l1 &= SECTION_NG_MASK;
+ *descriptor_l1 |= ((g_bit & 0x1) << SECTION_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set section Security attribute
+
+ The function sets section Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit Section Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_section(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= SECTION_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << SECTION_NS_SHIFT);
+ return 0;
+}
+
+/* Page 4k or 64k */
+/** \brief Set 4k/64k page execution-never attribute
+
+ The function sets 4k/64k page execution-never attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] xn Page execution-never attribute : EXECUTE , NON_EXECUTE.
+ \param [in] page Page size: PAGE_4k, PAGE_64k,
+
+ \return 0
+ */
+__STATIC_INLINE int __xn_page(uint32_t *descriptor_l2, mmu_execute_Type xn, mmu_region_size_Type page)
+{
+ if (page == PAGE_4k)
+ {
+ *descriptor_l2 &= PAGE_XN_4K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_4K_SHIFT);
+ }
+ else
+ {
+ *descriptor_l2 &= PAGE_XN_64K_MASK;
+ *descriptor_l2 |= ((xn & 0x1) << PAGE_XN_64K_SHIFT);
+ }
+ return 0;
+}
+
+/** \brief Set 4k/64k page domain
+
+ The function sets 4k/64k page domain
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] domain Page domain
+
+ \return 0
+ */
+__STATIC_INLINE int __domain_page(uint32_t *descriptor_l1, uint8_t domain)
+{
+ *descriptor_l1 &= PAGE_DOMAIN_MASK;
+ *descriptor_l1 |= ((domain & 0xf) << PAGE_DOMAIN_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page parity check
+
+ The function sets 4k/64k page parity check
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] p_bit Parity check: ECC_DISABLED, ECC_ENABLED
+
+ \return 0
+ */
+__STATIC_INLINE int __p_page(uint32_t *descriptor_l1, mmu_ecc_check_Type p_bit)
+{
+ *descriptor_l1 &= SECTION_P_MASK;
+ *descriptor_l1 |= ((p_bit & 0x1) << SECTION_P_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page access privileges
+
+ The function sets 4k/64k page access privileges
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] user User Level Access: NO_ACCESS, RW, READ
+ \param [in] priv Privilege Level Access: NO_ACCESS, RW, READ
+ \param [in] afe Access flag enable
+
+ \return 0
+ */
+__STATIC_INLINE int __ap_page(uint32_t *descriptor_l2, mmu_access_Type user, mmu_access_Type priv, uint32_t afe)
+{
+ uint32_t ap = 0;
+
+ if (afe == 0) { //full access
+ if ((priv == NO_ACCESS) && (user == NO_ACCESS)) { ap = 0x0; }
+ else if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == READ)) { ap = 0x2; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x6; }
+ }
+
+ else { //Simplified access
+ if ((priv == RW) && (user == NO_ACCESS)) { ap = 0x1; }
+ else if ((priv == RW) && (user == RW)) { ap = 0x3; }
+ else if ((priv == READ) && (user == NO_ACCESS)) { ap = 0x5; }
+ else if ((priv == READ) && (user == READ)) { ap = 0x7; }
+ }
+
+ *descriptor_l2 &= PAGE_AP_MASK;
+ *descriptor_l2 |= (ap & 0x3) << PAGE_AP_SHIFT;
+ *descriptor_l2 |= ((ap & 0x4)>>2) << PAGE_AP2_SHIFT;
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page shareability
+
+ The function sets 4k/64k page shareability
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] s_bit 4k/64k page shareability: NON_SHARED, SHARED
+
+ \return 0
+ */
+__STATIC_INLINE int __shared_page(uint32_t *descriptor_l2, mmu_shared_Type s_bit)
+{
+ *descriptor_l2 &= PAGE_S_MASK;
+ *descriptor_l2 |= ((s_bit & 0x1) << PAGE_S_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Global attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] g_bit 4k/64k page attribute: GLOBAL, NON_GLOBAL
+
+ \return 0
+ */
+__STATIC_INLINE int __global_page(uint32_t *descriptor_l2, mmu_global_Type g_bit)
+{
+ *descriptor_l2 &= PAGE_NG_MASK;
+ *descriptor_l2 |= ((g_bit & 0x1) << PAGE_NG_SHIFT);
+ return 0;
+}
+
+/** \brief Set 4k/64k page Security attribute
+
+ The function sets 4k/64k page Global attribute
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] s_bit 4k/64k page Security attribute: SECURE, NON_SECURE
+
+ \return 0
+ */
+__STATIC_INLINE int __secure_page(uint32_t *descriptor_l1, mmu_secure_Type s_bit)
+{
+ *descriptor_l1 &= PAGE_NS_MASK;
+ *descriptor_l1 |= ((s_bit & 0x1) << PAGE_NS_SHIFT);
+ return 0;
+}
+
+
+/** \brief Set Section memory attributes
+
+ The function sets section memory attributes
+
+ \param [out] descriptor_l1 L1 descriptor.
+ \param [in] mem Section memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_section(uint32_t *descriptor_l1, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner)
+{
+ *descriptor_l1 &= SECTION_TEXCB_MASK;
+
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l1 |= (1 << SECTION_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l1 |= 1 << SECTION_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_B_SHIFT) | (1 << SECTION_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l1 |= 1 << SECTION_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l1 |= (1 << SECTION_TEX0_SHIFT) | (1 << SECTION_TEX0_SHIFT);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Set 4k/64k page memory attributes
+
+ The function sets 4k/64k page memory attributes
+
+ \param [out] descriptor_l2 L2 descriptor.
+ \param [in] mem 4k/64k page memory type: NORMAL, DEVICE, SHARED_DEVICE, NON_SHARED_DEVICE, STRONGLY_ORDERED
+ \param [in] outer Outer cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+ \param [in] inner Inner cacheability: NON_CACHEABLE, WB_WA, WT, WB_NO_WA,
+
+ \return 0
+ */
+__STATIC_INLINE int __memory_page(uint32_t *descriptor_l2, mmu_memory_Type mem, mmu_cacheability_Type outer, mmu_cacheability_Type inner, mmu_region_size_Type page)
+{
+ *descriptor_l2 &= PAGE_4K_TEXCB_MASK;
+
+ if (page == PAGE_64k)
+ {
+ //same as section
+ __memory_section(descriptor_l2, mem, outer, inner);
+ }
+ else
+ {
+ if (STRONGLY_ORDERED == mem)
+ {
+ return 0;
+ }
+ else if (SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ }
+ else if (NON_SHARED_DEVICE == mem)
+ {
+ *descriptor_l2 |= (1 << PAGE_4K_TEX1_SHIFT);
+ }
+ else if (NORMAL == mem)
+ {
+ *descriptor_l2 |= 1 << PAGE_4K_TEX2_SHIFT;
+ switch(inner)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_C_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_B_SHIFT) | (1 << PAGE_4K_C_SHIFT);
+ break;
+ }
+ switch(outer)
+ {
+ case NON_CACHEABLE:
+ break;
+ case WB_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ case WT:
+ *descriptor_l2 |= 1 << PAGE_4K_TEX1_SHIFT;
+ break;
+ case WB_NO_WA:
+ *descriptor_l2 |= (1 << PAGE_4K_TEX0_SHIFT) | (1 << PAGE_4K_TEX0_SHIFT);
+ break;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/** \brief Create a L1 section descriptor
+
+ The function creates a section descriptor.
+
+ Assumptions:
+ - 16MB super sections not suported
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg Section attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_section_descriptor(uint32_t *descriptor, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+
+ __memory_section(descriptor, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t);
+ __xn_section(descriptor,reg.xn_t);
+ __domain_section(descriptor, reg.domain);
+ __p_section(descriptor, reg.e_t);
+ __ap_section(descriptor, reg.priv_t, reg.user_t, 1);
+ __shared_section(descriptor,reg.sh_t);
+ __global_section(descriptor,reg.g_t);
+ __secure_section(descriptor,reg.sec_t);
+ *descriptor &= SECTION_MASK;
+ *descriptor |= SECTION_DESCRIPTOR;
+
+ return 0;
+
+}
+
+
+/** \brief Create a L1 and L2 4k/64k page descriptor
+
+ The function creates a 4k/64k page descriptor.
+ Assumptions:
+ - TEX remap disabled, so memory type and attributes are described directly by bits in the descriptor
+ - Functions always return 0
+
+ \param [out] descriptor L1 descriptor
+ \param [out] descriptor2 L2 descriptor
+ \param [in] reg 4k/64k page attributes
+
+ \return 0
+ */
+__STATIC_INLINE int __get_page_descriptor(uint32_t *descriptor, uint32_t *descriptor2, mmu_region_attributes_Type reg)
+{
+ *descriptor = 0;
+ *descriptor2 = 0;
+
+ switch (reg.rg_t)
+ {
+ case PAGE_4k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_4k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_4k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_4K_MASK;
+ *descriptor2 |= PAGE_L2_4K_DESC;
+ break;
+
+ case PAGE_64k:
+ __memory_page(descriptor2, reg.mem_t, reg.outer_norm_t, reg.inner_norm_t, PAGE_64k);
+ __xn_page(descriptor2, reg.xn_t, PAGE_64k);
+ __domain_page(descriptor, reg.domain);
+ __p_page(descriptor, reg.e_t);
+ __ap_page(descriptor2, reg.priv_t, reg.user_t, 1);
+ __shared_page(descriptor2,reg.sh_t);
+ __global_page(descriptor2,reg.g_t);
+ __secure_page(descriptor,reg.sec_t);
+ *descriptor &= PAGE_L1_MASK;
+ *descriptor |= PAGE_L1_DESCRIPTOR;
+ *descriptor2 &= PAGE_L2_64K_MASK;
+ *descriptor2 |= PAGE_L2_64K_DESC;
+ break;
+
+ case SECTION:
+ //error
+ break;
+
+ }
+
+ return 0;
+
+}
+
+/** \brief Create a 1MB Section
+
+ \param [in] ttb Translation table base address
+ \param [in] base_address Section base address
+ \param [in] count Number of sections to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTSection(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1)
+{
+ uint32_t offset;
+ uint32_t entry;
+ uint32_t i;
+
+ offset = base_address >> 20;
+ entry = (base_address & 0xFFF00000) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb = ttb + offset;
+
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb++ = entry;
+ entry += OFFSET_1M;
+ }
+}
+
+/** \brief Create a 4k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 4k base address
+ \param [in] count Number of 4k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_4k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFFF000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_4K;
+ }
+}
+
+/** \brief Create a 64k page entry
+
+ \param [in] ttb L1 table base address
+ \param [in] base_address 64k base address
+ \param [in] count Number of 64k pages to create
+ \param [in] descriptor_l1 L1 descriptor (region attributes)
+ \param [in] ttb_l2 L2 table base address
+ \param [in] descriptor_l2 L2 descriptor (region attributes)
+
+ */
+__STATIC_INLINE void __TTPage_64k(uint32_t *ttb, uint32_t base_address, uint32_t count, uint32_t descriptor_l1, uint32_t *ttb_l2, uint32_t descriptor_l2 )
+{
+ uint32_t offset, offset2;
+ uint32_t entry, entry2;
+ uint32_t i,j;
+
+
+ offset = base_address >> 20;
+ entry = ((int)ttb_l2 & 0xFFFFFC00) | descriptor_l1;
+
+ //4 bytes aligned
+ ttb += offset;
+ //create l1_entry
+ *ttb = entry;
+
+ offset2 = (base_address & 0xff000) >> 12;
+ ttb_l2 += offset2;
+ entry2 = (base_address & 0xFFFF0000) | descriptor_l2;
+ for (i = 0; i < count; i++ )
+ {
+ //create 16 entries
+ for (j = 0; j < 16; j++)
+ //4 bytes aligned
+ *ttb_l2++ = entry2;
+ entry2 += OFFSET_64K;
+ }
+}
+
+/*@} end of MMU_Functions */
+#endif
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_TEENSY3_1/core_cm0.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,682 @@
+/**************************************************************************//**
+ * @file core_cm0.h
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M0
+ @{
+ */
+
+/* CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_TEENSY3_1/core_cm0plus.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,793 @@
+/**************************************************************************//**
+ * @file core_cm0plus.h
+ * @brief CMSIS Cortex-M0+ Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM0PLUS_H_GENERIC
+#define __CORE_CM0PLUS_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex-M0+
+ @{
+ */
+
+/* CMSIS CM0P definitions */
+#define __CM0PLUS_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM0PLUS_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0PLUS_CMSIS_VERSION ((__CM0PLUS_CMSIS_VERSION_MAIN << 16) | \
+ __CM0PLUS_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM0PLUS_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0PLUS_H_DEPENDANT
+#define __CORE_CM0PLUS_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0PLUS_REV
+ #define __CM0PLUS_REV 0x0000
+ #warning "__CM0PLUS_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __VTOR_PRESENT
+ #define __VTOR_PRESENT 0
+ #warning "__VTOR_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex-M0+ */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+#if (__VTOR_PRESENT == 1)
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+#else
+ uint32_t RESERVED0;
+#endif
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+#if (__VTOR_PRESENT == 1)
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 8 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0xFFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 8 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0xFFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0+ Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0+ Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#endif /* __CORE_CM0PLUS_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_TEENSY3_1/core_cm3.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1627 @@
+/**************************************************************************//**
+ * @file core_cm3.h
+ * @brief CMSIS Cortex-M3 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM3_H_GENERIC
+#define __CORE_CM3_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M3
+ @{
+ */
+
+/* CMSIS CM3 definitions */
+#define __CM3_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM3_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | \
+ __CM3_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x03) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI__VFP_SUPPORT____
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+
+#endif /* __CORE_CM3_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM3_H_DEPENDANT
+#define __CORE_CM3_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM3_REV
+ #define __CM3_REV 0x0200
+ #warning "__CM3_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M3 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#if (__CM3_REV < 0x0201) /* core r2p1 */
+#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */
+#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */
+
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x3FFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#else
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+#endif
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+#if ((defined __CM3_REV) && (__CM3_REV >= 0x200))
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+#else
+ uint32_t RESERVED1[1];
+#endif
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M3 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM3_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_TEENSY3_1/core_cm4.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,1772 @@
+/**************************************************************************//**
+ * @file core_cm4.h
+ * @brief CMSIS Cortex-M4 Core Peripheral Access Layer Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_H_GENERIC
+#define __CORE_CM4_H_GENERIC
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.<br>
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.<br>
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.<br>
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M4
+ @{
+ */
+
+/* CMSIS CM4 definitions */
+#define __CM4_CMSIS_VERSION_MAIN (0x03) /*!< [31:16] CMSIS HAL main version */
+#define __CM4_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */
+#define __CM4_CMSIS_VERSION ((__CM4_CMSIS_VERSION_MAIN << 16) | \
+ __CM4_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x04) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not. For this, __FPU_PRESENT has to be checked prior to making use of FPU specific registers and functions.
+*/
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI_VFP_SUPPORT__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #if (__FPU_PRESENT == 1)
+ #define __FPU_USED 1
+ #else
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #define __FPU_USED 0
+ #endif
+ #else
+ #define __FPU_USED 0
+ #endif
+#endif
+
+#include <stdint.h> /* standard types definitions */
+#include <core_cmInstr.h> /* Core Instruction Access */
+#include <core_cmFunc.h> /* Core Function Access */
+#include <core_cm4_simd.h> /* Compiler specific SIMD Intrinsics */
+
+#endif /* __CORE_CM4_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM4_H_DEPENDANT
+#define __CORE_CM4_H_DEPENDANT
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM4_REV
+ #define __CM4_REV 0x0000
+ #warning "__CM4_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __FPU_PRESENT
+ #define __FPU_PRESENT 0
+ #warning "__FPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __MPU_PRESENT
+ #define __MPU_PRESENT 0
+ #warning "__MPU_PRESENT not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 4
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ <strong>IO Type Qualifiers</strong> are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M4 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ - Core Debug Register
+ - Core MPU Register
+ - Core FPU Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[8]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[24];
+ __IO uint32_t ICER[8]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[24];
+ __IO uint32_t ISPR[8]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[24];
+ __IO uint32_t ICPR[8]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[24];
+ __IO uint32_t IABR[8]; /*!< Offset: 0x200 (R/W) Interrupt Active bit Register */
+ uint32_t RESERVED4[56];
+ __IO uint8_t IP[240]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register (8Bit wide) */
+ uint32_t RESERVED5[644];
+ __O uint32_t STIR; /*!< Offset: 0xE00 ( /W) Software Trigger Interrupt Register */
+} NVIC_Type;
+
+/* Software Triggered Interrupt Register Definitions */
+#define NVIC_STIR_INTID_Pos 0 /*!< STIR: INTLINESNUM Position */
+#define NVIC_STIR_INTID_Msk (0x1FFUL << NVIC_STIR_INTID_Pos) /*!< STIR: INTLINESNUM Mask */
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ __IO uint32_t VTOR; /*!< Offset: 0x008 (R/W) Vector Table Offset Register */
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ __IO uint8_t SHP[12]; /*!< Offset: 0x018 (R/W) System Handlers Priority Registers (4-7, 8-11, 12-15) */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+ __IO uint32_t CFSR; /*!< Offset: 0x028 (R/W) Configurable Fault Status Register */
+ __IO uint32_t HFSR; /*!< Offset: 0x02C (R/W) HardFault Status Register */
+ __IO uint32_t DFSR; /*!< Offset: 0x030 (R/W) Debug Fault Status Register */
+ __IO uint32_t MMFAR; /*!< Offset: 0x034 (R/W) MemManage Fault Address Register */
+ __IO uint32_t BFAR; /*!< Offset: 0x038 (R/W) BusFault Address Register */
+ __IO uint32_t AFSR; /*!< Offset: 0x03C (R/W) Auxiliary Fault Status Register */
+ __I uint32_t PFR[2]; /*!< Offset: 0x040 (R/ ) Processor Feature Register */
+ __I uint32_t DFR; /*!< Offset: 0x048 (R/ ) Debug Feature Register */
+ __I uint32_t ADR; /*!< Offset: 0x04C (R/ ) Auxiliary Feature Register */
+ __I uint32_t MMFR[4]; /*!< Offset: 0x050 (R/ ) Memory Model Feature Register */
+ __I uint32_t ISAR[5]; /*!< Offset: 0x060 (R/ ) Instruction Set Attributes Register */
+ uint32_t RESERVED0[5];
+ __IO uint32_t CPACR; /*!< Offset: 0x088 (R/W) Coprocessor Access Control Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_RETTOBASE_Pos 11 /*!< SCB ICSR: RETTOBASE Position */
+#define SCB_ICSR_RETTOBASE_Msk (1UL << SCB_ICSR_RETTOBASE_Pos) /*!< SCB ICSR: RETTOBASE Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Vector Table Offset Register Definitions */
+#define SCB_VTOR_TBLOFF_Pos 7 /*!< SCB VTOR: TBLOFF Position */
+#define SCB_VTOR_TBLOFF_Msk (0x1FFFFFFUL << SCB_VTOR_TBLOFF_Pos) /*!< SCB VTOR: TBLOFF Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_PRIGROUP_Pos 8 /*!< SCB AIRCR: PRIGROUP Position */
+#define SCB_AIRCR_PRIGROUP_Msk (7UL << SCB_AIRCR_PRIGROUP_Pos) /*!< SCB AIRCR: PRIGROUP Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+#define SCB_AIRCR_VECTRESET_Pos 0 /*!< SCB AIRCR: VECTRESET Position */
+#define SCB_AIRCR_VECTRESET_Msk (1UL << SCB_AIRCR_VECTRESET_Pos) /*!< SCB AIRCR: VECTRESET Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_BFHFNMIGN_Pos 8 /*!< SCB CCR: BFHFNMIGN Position */
+#define SCB_CCR_BFHFNMIGN_Msk (1UL << SCB_CCR_BFHFNMIGN_Pos) /*!< SCB CCR: BFHFNMIGN Mask */
+
+#define SCB_CCR_DIV_0_TRP_Pos 4 /*!< SCB CCR: DIV_0_TRP Position */
+#define SCB_CCR_DIV_0_TRP_Msk (1UL << SCB_CCR_DIV_0_TRP_Pos) /*!< SCB CCR: DIV_0_TRP Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+#define SCB_CCR_USERSETMPEND_Pos 1 /*!< SCB CCR: USERSETMPEND Position */
+#define SCB_CCR_USERSETMPEND_Msk (1UL << SCB_CCR_USERSETMPEND_Pos) /*!< SCB CCR: USERSETMPEND Mask */
+
+#define SCB_CCR_NONBASETHRDENA_Pos 0 /*!< SCB CCR: NONBASETHRDENA Position */
+#define SCB_CCR_NONBASETHRDENA_Msk (1UL << SCB_CCR_NONBASETHRDENA_Pos) /*!< SCB CCR: NONBASETHRDENA Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_USGFAULTENA_Pos 18 /*!< SCB SHCSR: USGFAULTENA Position */
+#define SCB_SHCSR_USGFAULTENA_Msk (1UL << SCB_SHCSR_USGFAULTENA_Pos) /*!< SCB SHCSR: USGFAULTENA Mask */
+
+#define SCB_SHCSR_BUSFAULTENA_Pos 17 /*!< SCB SHCSR: BUSFAULTENA Position */
+#define SCB_SHCSR_BUSFAULTENA_Msk (1UL << SCB_SHCSR_BUSFAULTENA_Pos) /*!< SCB SHCSR: BUSFAULTENA Mask */
+
+#define SCB_SHCSR_MEMFAULTENA_Pos 16 /*!< SCB SHCSR: MEMFAULTENA Position */
+#define SCB_SHCSR_MEMFAULTENA_Msk (1UL << SCB_SHCSR_MEMFAULTENA_Pos) /*!< SCB SHCSR: MEMFAULTENA Mask */
+
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+#define SCB_SHCSR_BUSFAULTPENDED_Pos 14 /*!< SCB SHCSR: BUSFAULTPENDED Position */
+#define SCB_SHCSR_BUSFAULTPENDED_Msk (1UL << SCB_SHCSR_BUSFAULTPENDED_Pos) /*!< SCB SHCSR: BUSFAULTPENDED Mask */
+
+#define SCB_SHCSR_MEMFAULTPENDED_Pos 13 /*!< SCB SHCSR: MEMFAULTPENDED Position */
+#define SCB_SHCSR_MEMFAULTPENDED_Msk (1UL << SCB_SHCSR_MEMFAULTPENDED_Pos) /*!< SCB SHCSR: MEMFAULTPENDED Mask */
+
+#define SCB_SHCSR_USGFAULTPENDED_Pos 12 /*!< SCB SHCSR: USGFAULTPENDED Position */
+#define SCB_SHCSR_USGFAULTPENDED_Msk (1UL << SCB_SHCSR_USGFAULTPENDED_Pos) /*!< SCB SHCSR: USGFAULTPENDED Mask */
+
+#define SCB_SHCSR_SYSTICKACT_Pos 11 /*!< SCB SHCSR: SYSTICKACT Position */
+#define SCB_SHCSR_SYSTICKACT_Msk (1UL << SCB_SHCSR_SYSTICKACT_Pos) /*!< SCB SHCSR: SYSTICKACT Mask */
+
+#define SCB_SHCSR_PENDSVACT_Pos 10 /*!< SCB SHCSR: PENDSVACT Position */
+#define SCB_SHCSR_PENDSVACT_Msk (1UL << SCB_SHCSR_PENDSVACT_Pos) /*!< SCB SHCSR: PENDSVACT Mask */
+
+#define SCB_SHCSR_MONITORACT_Pos 8 /*!< SCB SHCSR: MONITORACT Position */
+#define SCB_SHCSR_MONITORACT_Msk (1UL << SCB_SHCSR_MONITORACT_Pos) /*!< SCB SHCSR: MONITORACT Mask */
+
+#define SCB_SHCSR_SVCALLACT_Pos 7 /*!< SCB SHCSR: SVCALLACT Position */
+#define SCB_SHCSR_SVCALLACT_Msk (1UL << SCB_SHCSR_SVCALLACT_Pos) /*!< SCB SHCSR: SVCALLACT Mask */
+
+#define SCB_SHCSR_USGFAULTACT_Pos 3 /*!< SCB SHCSR: USGFAULTACT Position */
+#define SCB_SHCSR_USGFAULTACT_Msk (1UL << SCB_SHCSR_USGFAULTACT_Pos) /*!< SCB SHCSR: USGFAULTACT Mask */
+
+#define SCB_SHCSR_BUSFAULTACT_Pos 1 /*!< SCB SHCSR: BUSFAULTACT Position */
+#define SCB_SHCSR_BUSFAULTACT_Msk (1UL << SCB_SHCSR_BUSFAULTACT_Pos) /*!< SCB SHCSR: BUSFAULTACT Mask */
+
+#define SCB_SHCSR_MEMFAULTACT_Pos 0 /*!< SCB SHCSR: MEMFAULTACT Position */
+#define SCB_SHCSR_MEMFAULTACT_Msk (1UL << SCB_SHCSR_MEMFAULTACT_Pos) /*!< SCB SHCSR: MEMFAULTACT Mask */
+
+/* SCB Configurable Fault Status Registers Definitions */
+#define SCB_CFSR_USGFAULTSR_Pos 16 /*!< SCB CFSR: Usage Fault Status Register Position */
+#define SCB_CFSR_USGFAULTSR_Msk (0xFFFFUL << SCB_CFSR_USGFAULTSR_Pos) /*!< SCB CFSR: Usage Fault Status Register Mask */
+
+#define SCB_CFSR_BUSFAULTSR_Pos 8 /*!< SCB CFSR: Bus Fault Status Register Position */
+#define SCB_CFSR_BUSFAULTSR_Msk (0xFFUL << SCB_CFSR_BUSFAULTSR_Pos) /*!< SCB CFSR: Bus Fault Status Register Mask */
+
+#define SCB_CFSR_MEMFAULTSR_Pos 0 /*!< SCB CFSR: Memory Manage Fault Status Register Position */
+#define SCB_CFSR_MEMFAULTSR_Msk (0xFFUL << SCB_CFSR_MEMFAULTSR_Pos) /*!< SCB CFSR: Memory Manage Fault Status Register Mask */
+
+/* SCB Hard Fault Status Registers Definitions */
+#define SCB_HFSR_DEBUGEVT_Pos 31 /*!< SCB HFSR: DEBUGEVT Position */
+#define SCB_HFSR_DEBUGEVT_Msk (1UL << SCB_HFSR_DEBUGEVT_Pos) /*!< SCB HFSR: DEBUGEVT Mask */
+
+#define SCB_HFSR_FORCED_Pos 30 /*!< SCB HFSR: FORCED Position */
+#define SCB_HFSR_FORCED_Msk (1UL << SCB_HFSR_FORCED_Pos) /*!< SCB HFSR: FORCED Mask */
+
+#define SCB_HFSR_VECTTBL_Pos 1 /*!< SCB HFSR: VECTTBL Position */
+#define SCB_HFSR_VECTTBL_Msk (1UL << SCB_HFSR_VECTTBL_Pos) /*!< SCB HFSR: VECTTBL Mask */
+
+/* SCB Debug Fault Status Register Definitions */
+#define SCB_DFSR_EXTERNAL_Pos 4 /*!< SCB DFSR: EXTERNAL Position */
+#define SCB_DFSR_EXTERNAL_Msk (1UL << SCB_DFSR_EXTERNAL_Pos) /*!< SCB DFSR: EXTERNAL Mask */
+
+#define SCB_DFSR_VCATCH_Pos 3 /*!< SCB DFSR: VCATCH Position */
+#define SCB_DFSR_VCATCH_Msk (1UL << SCB_DFSR_VCATCH_Pos) /*!< SCB DFSR: VCATCH Mask */
+
+#define SCB_DFSR_DWTTRAP_Pos 2 /*!< SCB DFSR: DWTTRAP Position */
+#define SCB_DFSR_DWTTRAP_Msk (1UL << SCB_DFSR_DWTTRAP_Pos) /*!< SCB DFSR: DWTTRAP Mask */
+
+#define SCB_DFSR_BKPT_Pos 1 /*!< SCB DFSR: BKPT Position */
+#define SCB_DFSR_BKPT_Msk (1UL << SCB_DFSR_BKPT_Pos) /*!< SCB DFSR: BKPT Mask */
+
+#define SCB_DFSR_HALTED_Pos 0 /*!< SCB DFSR: HALTED Position */
+#define SCB_DFSR_HALTED_Msk (1UL << SCB_DFSR_HALTED_Pos) /*!< SCB DFSR: HALTED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCnSCB System Controls not in SCB (SCnSCB)
+ \brief Type definitions for the System Control and ID Register not in the SCB
+ @{
+ */
+
+/** \brief Structure type to access the System Control and ID Register not in the SCB.
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __I uint32_t ICTR; /*!< Offset: 0x004 (R/ ) Interrupt Controller Type Register */
+ __IO uint32_t ACTLR; /*!< Offset: 0x008 (R/W) Auxiliary Control Register */
+} SCnSCB_Type;
+
+/* Interrupt Controller Type Register Definitions */
+#define SCnSCB_ICTR_INTLINESNUM_Pos 0 /*!< ICTR: INTLINESNUM Position */
+#define SCnSCB_ICTR_INTLINESNUM_Msk (0xFUL << SCnSCB_ICTR_INTLINESNUM_Pos) /*!< ICTR: INTLINESNUM Mask */
+
+/* Auxiliary Control Register Definitions */
+#define SCnSCB_ACTLR_DISOOFP_Pos 9 /*!< ACTLR: DISOOFP Position */
+#define SCnSCB_ACTLR_DISOOFP_Msk (1UL << SCnSCB_ACTLR_DISOOFP_Pos) /*!< ACTLR: DISOOFP Mask */
+
+#define SCnSCB_ACTLR_DISFPCA_Pos 8 /*!< ACTLR: DISFPCA Position */
+#define SCnSCB_ACTLR_DISFPCA_Msk (1UL << SCnSCB_ACTLR_DISFPCA_Pos) /*!< ACTLR: DISFPCA Mask */
+
+#define SCnSCB_ACTLR_DISFOLD_Pos 2 /*!< ACTLR: DISFOLD Position */
+#define SCnSCB_ACTLR_DISFOLD_Msk (1UL << SCnSCB_ACTLR_DISFOLD_Pos) /*!< ACTLR: DISFOLD Mask */
+
+#define SCnSCB_ACTLR_DISDEFWBUF_Pos 1 /*!< ACTLR: DISDEFWBUF Position */
+#define SCnSCB_ACTLR_DISDEFWBUF_Msk (1UL << SCnSCB_ACTLR_DISDEFWBUF_Pos) /*!< ACTLR: DISDEFWBUF Mask */
+
+#define SCnSCB_ACTLR_DISMCYCINT_Pos 0 /*!< ACTLR: DISMCYCINT Position */
+#define SCnSCB_ACTLR_DISMCYCINT_Msk (1UL << SCnSCB_ACTLR_DISMCYCINT_Pos) /*!< ACTLR: DISMCYCINT Mask */
+
+/*@} end of group CMSIS_SCnotSCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_ITM Instrumentation Trace Macrocell (ITM)
+ \brief Type definitions for the Instrumentation Trace Macrocell (ITM)
+ @{
+ */
+
+/** \brief Structure type to access the Instrumentation Trace Macrocell Register (ITM).
+ */
+typedef struct
+{
+ __O union
+ {
+ __O uint8_t u8; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 8-bit */
+ __O uint16_t u16; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 16-bit */
+ __O uint32_t u32; /*!< Offset: 0x000 ( /W) ITM Stimulus Port 32-bit */
+ } PORT [32]; /*!< Offset: 0x000 ( /W) ITM Stimulus Port Registers */
+ uint32_t RESERVED0[864];
+ __IO uint32_t TER; /*!< Offset: 0xE00 (R/W) ITM Trace Enable Register */
+ uint32_t RESERVED1[15];
+ __IO uint32_t TPR; /*!< Offset: 0xE40 (R/W) ITM Trace Privilege Register */
+ uint32_t RESERVED2[15];
+ __IO uint32_t TCR; /*!< Offset: 0xE80 (R/W) ITM Trace Control Register */
+ uint32_t RESERVED3[29];
+ __O uint32_t IWR; /*!< Offset: 0xEF8 ( /W) ITM Integration Write Register */
+ __I uint32_t IRR; /*!< Offset: 0xEFC (R/ ) ITM Integration Read Register */
+ __IO uint32_t IMCR; /*!< Offset: 0xF00 (R/W) ITM Integration Mode Control Register */
+ uint32_t RESERVED4[43];
+ __O uint32_t LAR; /*!< Offset: 0xFB0 ( /W) ITM Lock Access Register */
+ __I uint32_t LSR; /*!< Offset: 0xFB4 (R/ ) ITM Lock Status Register */
+ uint32_t RESERVED5[6];
+ __I uint32_t PID4; /*!< Offset: 0xFD0 (R/ ) ITM Peripheral Identification Register #4 */
+ __I uint32_t PID5; /*!< Offset: 0xFD4 (R/ ) ITM Peripheral Identification Register #5 */
+ __I uint32_t PID6; /*!< Offset: 0xFD8 (R/ ) ITM Peripheral Identification Register #6 */
+ __I uint32_t PID7; /*!< Offset: 0xFDC (R/ ) ITM Peripheral Identification Register #7 */
+ __I uint32_t PID0; /*!< Offset: 0xFE0 (R/ ) ITM Peripheral Identification Register #0 */
+ __I uint32_t PID1; /*!< Offset: 0xFE4 (R/ ) ITM Peripheral Identification Register #1 */
+ __I uint32_t PID2; /*!< Offset: 0xFE8 (R/ ) ITM Peripheral Identification Register #2 */
+ __I uint32_t PID3; /*!< Offset: 0xFEC (R/ ) ITM Peripheral Identification Register #3 */
+ __I uint32_t CID0; /*!< Offset: 0xFF0 (R/ ) ITM Component Identification Register #0 */
+ __I uint32_t CID1; /*!< Offset: 0xFF4 (R/ ) ITM Component Identification Register #1 */
+ __I uint32_t CID2; /*!< Offset: 0xFF8 (R/ ) ITM Component Identification Register #2 */
+ __I uint32_t CID3; /*!< Offset: 0xFFC (R/ ) ITM Component Identification Register #3 */
+} ITM_Type;
+
+/* ITM Trace Privilege Register Definitions */
+#define ITM_TPR_PRIVMASK_Pos 0 /*!< ITM TPR: PRIVMASK Position */
+#define ITM_TPR_PRIVMASK_Msk (0xFUL << ITM_TPR_PRIVMASK_Pos) /*!< ITM TPR: PRIVMASK Mask */
+
+/* ITM Trace Control Register Definitions */
+#define ITM_TCR_BUSY_Pos 23 /*!< ITM TCR: BUSY Position */
+#define ITM_TCR_BUSY_Msk (1UL << ITM_TCR_BUSY_Pos) /*!< ITM TCR: BUSY Mask */
+
+#define ITM_TCR_TraceBusID_Pos 16 /*!< ITM TCR: ATBID Position */
+#define ITM_TCR_TraceBusID_Msk (0x7FUL << ITM_TCR_TraceBusID_Pos) /*!< ITM TCR: ATBID Mask */
+
+#define ITM_TCR_GTSFREQ_Pos 10 /*!< ITM TCR: Global timestamp frequency Position */
+#define ITM_TCR_GTSFREQ_Msk (3UL << ITM_TCR_GTSFREQ_Pos) /*!< ITM TCR: Global timestamp frequency Mask */
+
+#define ITM_TCR_TSPrescale_Pos 8 /*!< ITM TCR: TSPrescale Position */
+#define ITM_TCR_TSPrescale_Msk (3UL << ITM_TCR_TSPrescale_Pos) /*!< ITM TCR: TSPrescale Mask */
+
+#define ITM_TCR_SWOENA_Pos 4 /*!< ITM TCR: SWOENA Position */
+#define ITM_TCR_SWOENA_Msk (1UL << ITM_TCR_SWOENA_Pos) /*!< ITM TCR: SWOENA Mask */
+
+#define ITM_TCR_DWTENA_Pos 3 /*!< ITM TCR: DWTENA Position */
+#define ITM_TCR_DWTENA_Msk (1UL << ITM_TCR_DWTENA_Pos) /*!< ITM TCR: DWTENA Mask */
+
+#define ITM_TCR_SYNCENA_Pos 2 /*!< ITM TCR: SYNCENA Position */
+#define ITM_TCR_SYNCENA_Msk (1UL << ITM_TCR_SYNCENA_Pos) /*!< ITM TCR: SYNCENA Mask */
+
+#define ITM_TCR_TSENA_Pos 1 /*!< ITM TCR: TSENA Position */
+#define ITM_TCR_TSENA_Msk (1UL << ITM_TCR_TSENA_Pos) /*!< ITM TCR: TSENA Mask */
+
+#define ITM_TCR_ITMENA_Pos 0 /*!< ITM TCR: ITM Enable bit Position */
+#define ITM_TCR_ITMENA_Msk (1UL << ITM_TCR_ITMENA_Pos) /*!< ITM TCR: ITM Enable bit Mask */
+
+/* ITM Integration Write Register Definitions */
+#define ITM_IWR_ATVALIDM_Pos 0 /*!< ITM IWR: ATVALIDM Position */
+#define ITM_IWR_ATVALIDM_Msk (1UL << ITM_IWR_ATVALIDM_Pos) /*!< ITM IWR: ATVALIDM Mask */
+
+/* ITM Integration Read Register Definitions */
+#define ITM_IRR_ATREADYM_Pos 0 /*!< ITM IRR: ATREADYM Position */
+#define ITM_IRR_ATREADYM_Msk (1UL << ITM_IRR_ATREADYM_Pos) /*!< ITM IRR: ATREADYM Mask */
+
+/* ITM Integration Mode Control Register Definitions */
+#define ITM_IMCR_INTEGRATION_Pos 0 /*!< ITM IMCR: INTEGRATION Position */
+#define ITM_IMCR_INTEGRATION_Msk (1UL << ITM_IMCR_INTEGRATION_Pos) /*!< ITM IMCR: INTEGRATION Mask */
+
+/* ITM Lock Status Register Definitions */
+#define ITM_LSR_ByteAcc_Pos 2 /*!< ITM LSR: ByteAcc Position */
+#define ITM_LSR_ByteAcc_Msk (1UL << ITM_LSR_ByteAcc_Pos) /*!< ITM LSR: ByteAcc Mask */
+
+#define ITM_LSR_Access_Pos 1 /*!< ITM LSR: Access Position */
+#define ITM_LSR_Access_Msk (1UL << ITM_LSR_Access_Pos) /*!< ITM LSR: Access Mask */
+
+#define ITM_LSR_Present_Pos 0 /*!< ITM LSR: Present Position */
+#define ITM_LSR_Present_Msk (1UL << ITM_LSR_Present_Pos) /*!< ITM LSR: Present Mask */
+
+/*@}*/ /* end of group CMSIS_ITM */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_DWT Data Watchpoint and Trace (DWT)
+ \brief Type definitions for the Data Watchpoint and Trace (DWT)
+ @{
+ */
+
+/** \brief Structure type to access the Data Watchpoint and Trace Register (DWT).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) Control Register */
+ __IO uint32_t CYCCNT; /*!< Offset: 0x004 (R/W) Cycle Count Register */
+ __IO uint32_t CPICNT; /*!< Offset: 0x008 (R/W) CPI Count Register */
+ __IO uint32_t EXCCNT; /*!< Offset: 0x00C (R/W) Exception Overhead Count Register */
+ __IO uint32_t SLEEPCNT; /*!< Offset: 0x010 (R/W) Sleep Count Register */
+ __IO uint32_t LSUCNT; /*!< Offset: 0x014 (R/W) LSU Count Register */
+ __IO uint32_t FOLDCNT; /*!< Offset: 0x018 (R/W) Folded-instruction Count Register */
+ __I uint32_t PCSR; /*!< Offset: 0x01C (R/ ) Program Counter Sample Register */
+ __IO uint32_t COMP0; /*!< Offset: 0x020 (R/W) Comparator Register 0 */
+ __IO uint32_t MASK0; /*!< Offset: 0x024 (R/W) Mask Register 0 */
+ __IO uint32_t FUNCTION0; /*!< Offset: 0x028 (R/W) Function Register 0 */
+ uint32_t RESERVED0[1];
+ __IO uint32_t COMP1; /*!< Offset: 0x030 (R/W) Comparator Register 1 */
+ __IO uint32_t MASK1; /*!< Offset: 0x034 (R/W) Mask Register 1 */
+ __IO uint32_t FUNCTION1; /*!< Offset: 0x038 (R/W) Function Register 1 */
+ uint32_t RESERVED1[1];
+ __IO uint32_t COMP2; /*!< Offset: 0x040 (R/W) Comparator Register 2 */
+ __IO uint32_t MASK2; /*!< Offset: 0x044 (R/W) Mask Register 2 */
+ __IO uint32_t FUNCTION2; /*!< Offset: 0x048 (R/W) Function Register 2 */
+ uint32_t RESERVED2[1];
+ __IO uint32_t COMP3; /*!< Offset: 0x050 (R/W) Comparator Register 3 */
+ __IO uint32_t MASK3; /*!< Offset: 0x054 (R/W) Mask Register 3 */
+ __IO uint32_t FUNCTION3; /*!< Offset: 0x058 (R/W) Function Register 3 */
+} DWT_Type;
+
+/* DWT Control Register Definitions */
+#define DWT_CTRL_NUMCOMP_Pos 28 /*!< DWT CTRL: NUMCOMP Position */
+#define DWT_CTRL_NUMCOMP_Msk (0xFUL << DWT_CTRL_NUMCOMP_Pos) /*!< DWT CTRL: NUMCOMP Mask */
+
+#define DWT_CTRL_NOTRCPKT_Pos 27 /*!< DWT CTRL: NOTRCPKT Position */
+#define DWT_CTRL_NOTRCPKT_Msk (0x1UL << DWT_CTRL_NOTRCPKT_Pos) /*!< DWT CTRL: NOTRCPKT Mask */
+
+#define DWT_CTRL_NOEXTTRIG_Pos 26 /*!< DWT CTRL: NOEXTTRIG Position */
+#define DWT_CTRL_NOEXTTRIG_Msk (0x1UL << DWT_CTRL_NOEXTTRIG_Pos) /*!< DWT CTRL: NOEXTTRIG Mask */
+
+#define DWT_CTRL_NOCYCCNT_Pos 25 /*!< DWT CTRL: NOCYCCNT Position */
+#define DWT_CTRL_NOCYCCNT_Msk (0x1UL << DWT_CTRL_NOCYCCNT_Pos) /*!< DWT CTRL: NOCYCCNT Mask */
+
+#define DWT_CTRL_NOPRFCNT_Pos 24 /*!< DWT CTRL: NOPRFCNT Position */
+#define DWT_CTRL_NOPRFCNT_Msk (0x1UL << DWT_CTRL_NOPRFCNT_Pos) /*!< DWT CTRL: NOPRFCNT Mask */
+
+#define DWT_CTRL_CYCEVTENA_Pos 22 /*!< DWT CTRL: CYCEVTENA Position */
+#define DWT_CTRL_CYCEVTENA_Msk (0x1UL << DWT_CTRL_CYCEVTENA_Pos) /*!< DWT CTRL: CYCEVTENA Mask */
+
+#define DWT_CTRL_FOLDEVTENA_Pos 21 /*!< DWT CTRL: FOLDEVTENA Position */
+#define DWT_CTRL_FOLDEVTENA_Msk (0x1UL << DWT_CTRL_FOLDEVTENA_Pos) /*!< DWT CTRL: FOLDEVTENA Mask */
+
+#define DWT_CTRL_LSUEVTENA_Pos 20 /*!< DWT CTRL: LSUEVTENA Position */
+#define DWT_CTRL_LSUEVTENA_Msk (0x1UL << DWT_CTRL_LSUEVTENA_Pos) /*!< DWT CTRL: LSUEVTENA Mask */
+
+#define DWT_CTRL_SLEEPEVTENA_Pos 19 /*!< DWT CTRL: SLEEPEVTENA Position */
+#define DWT_CTRL_SLEEPEVTENA_Msk (0x1UL << DWT_CTRL_SLEEPEVTENA_Pos) /*!< DWT CTRL: SLEEPEVTENA Mask */
+
+#define DWT_CTRL_EXCEVTENA_Pos 18 /*!< DWT CTRL: EXCEVTENA Position */
+#define DWT_CTRL_EXCEVTENA_Msk (0x1UL << DWT_CTRL_EXCEVTENA_Pos) /*!< DWT CTRL: EXCEVTENA Mask */
+
+#define DWT_CTRL_CPIEVTENA_Pos 17 /*!< DWT CTRL: CPIEVTENA Position */
+#define DWT_CTRL_CPIEVTENA_Msk (0x1UL << DWT_CTRL_CPIEVTENA_Pos) /*!< DWT CTRL: CPIEVTENA Mask */
+
+#define DWT_CTRL_EXCTRCENA_Pos 16 /*!< DWT CTRL: EXCTRCENA Position */
+#define DWT_CTRL_EXCTRCENA_Msk (0x1UL << DWT_CTRL_EXCTRCENA_Pos) /*!< DWT CTRL: EXCTRCENA Mask */
+
+#define DWT_CTRL_PCSAMPLENA_Pos 12 /*!< DWT CTRL: PCSAMPLENA Position */
+#define DWT_CTRL_PCSAMPLENA_Msk (0x1UL << DWT_CTRL_PCSAMPLENA_Pos) /*!< DWT CTRL: PCSAMPLENA Mask */
+
+#define DWT_CTRL_SYNCTAP_Pos 10 /*!< DWT CTRL: SYNCTAP Position */
+#define DWT_CTRL_SYNCTAP_Msk (0x3UL << DWT_CTRL_SYNCTAP_Pos) /*!< DWT CTRL: SYNCTAP Mask */
+
+#define DWT_CTRL_CYCTAP_Pos 9 /*!< DWT CTRL: CYCTAP Position */
+#define DWT_CTRL_CYCTAP_Msk (0x1UL << DWT_CTRL_CYCTAP_Pos) /*!< DWT CTRL: CYCTAP Mask */
+
+#define DWT_CTRL_POSTINIT_Pos 5 /*!< DWT CTRL: POSTINIT Position */
+#define DWT_CTRL_POSTINIT_Msk (0xFUL << DWT_CTRL_POSTINIT_Pos) /*!< DWT CTRL: POSTINIT Mask */
+
+#define DWT_CTRL_POSTPRESET_Pos 1 /*!< DWT CTRL: POSTPRESET Position */
+#define DWT_CTRL_POSTPRESET_Msk (0xFUL << DWT_CTRL_POSTPRESET_Pos) /*!< DWT CTRL: POSTPRESET Mask */
+
+#define DWT_CTRL_CYCCNTENA_Pos 0 /*!< DWT CTRL: CYCCNTENA Position */
+#define DWT_CTRL_CYCCNTENA_Msk (0x1UL << DWT_CTRL_CYCCNTENA_Pos) /*!< DWT CTRL: CYCCNTENA Mask */
+
+/* DWT CPI Count Register Definitions */
+#define DWT_CPICNT_CPICNT_Pos 0 /*!< DWT CPICNT: CPICNT Position */
+#define DWT_CPICNT_CPICNT_Msk (0xFFUL << DWT_CPICNT_CPICNT_Pos) /*!< DWT CPICNT: CPICNT Mask */
+
+/* DWT Exception Overhead Count Register Definitions */
+#define DWT_EXCCNT_EXCCNT_Pos 0 /*!< DWT EXCCNT: EXCCNT Position */
+#define DWT_EXCCNT_EXCCNT_Msk (0xFFUL << DWT_EXCCNT_EXCCNT_Pos) /*!< DWT EXCCNT: EXCCNT Mask */
+
+/* DWT Sleep Count Register Definitions */
+#define DWT_SLEEPCNT_SLEEPCNT_Pos 0 /*!< DWT SLEEPCNT: SLEEPCNT Position */
+#define DWT_SLEEPCNT_SLEEPCNT_Msk (0xFFUL << DWT_SLEEPCNT_SLEEPCNT_Pos) /*!< DWT SLEEPCNT: SLEEPCNT Mask */
+
+/* DWT LSU Count Register Definitions */
+#define DWT_LSUCNT_LSUCNT_Pos 0 /*!< DWT LSUCNT: LSUCNT Position */
+#define DWT_LSUCNT_LSUCNT_Msk (0xFFUL << DWT_LSUCNT_LSUCNT_Pos) /*!< DWT LSUCNT: LSUCNT Mask */
+
+/* DWT Folded-instruction Count Register Definitions */
+#define DWT_FOLDCNT_FOLDCNT_Pos 0 /*!< DWT FOLDCNT: FOLDCNT Position */
+#define DWT_FOLDCNT_FOLDCNT_Msk (0xFFUL << DWT_FOLDCNT_FOLDCNT_Pos) /*!< DWT FOLDCNT: FOLDCNT Mask */
+
+/* DWT Comparator Mask Register Definitions */
+#define DWT_MASK_MASK_Pos 0 /*!< DWT MASK: MASK Position */
+#define DWT_MASK_MASK_Msk (0x1FUL << DWT_MASK_MASK_Pos) /*!< DWT MASK: MASK Mask */
+
+/* DWT Comparator Function Register Definitions */
+#define DWT_FUNCTION_MATCHED_Pos 24 /*!< DWT FUNCTION: MATCHED Position */
+#define DWT_FUNCTION_MATCHED_Msk (0x1UL << DWT_FUNCTION_MATCHED_Pos) /*!< DWT FUNCTION: MATCHED Mask */
+
+#define DWT_FUNCTION_DATAVADDR1_Pos 16 /*!< DWT FUNCTION: DATAVADDR1 Position */
+#define DWT_FUNCTION_DATAVADDR1_Msk (0xFUL << DWT_FUNCTION_DATAVADDR1_Pos) /*!< DWT FUNCTION: DATAVADDR1 Mask */
+
+#define DWT_FUNCTION_DATAVADDR0_Pos 12 /*!< DWT FUNCTION: DATAVADDR0 Position */
+#define DWT_FUNCTION_DATAVADDR0_Msk (0xFUL << DWT_FUNCTION_DATAVADDR0_Pos) /*!< DWT FUNCTION: DATAVADDR0 Mask */
+
+#define DWT_FUNCTION_DATAVSIZE_Pos 10 /*!< DWT FUNCTION: DATAVSIZE Position */
+#define DWT_FUNCTION_DATAVSIZE_Msk (0x3UL << DWT_FUNCTION_DATAVSIZE_Pos) /*!< DWT FUNCTION: DATAVSIZE Mask */
+
+#define DWT_FUNCTION_LNK1ENA_Pos 9 /*!< DWT FUNCTION: LNK1ENA Position */
+#define DWT_FUNCTION_LNK1ENA_Msk (0x1UL << DWT_FUNCTION_LNK1ENA_Pos) /*!< DWT FUNCTION: LNK1ENA Mask */
+
+#define DWT_FUNCTION_DATAVMATCH_Pos 8 /*!< DWT FUNCTION: DATAVMATCH Position */
+#define DWT_FUNCTION_DATAVMATCH_Msk (0x1UL << DWT_FUNCTION_DATAVMATCH_Pos) /*!< DWT FUNCTION: DATAVMATCH Mask */
+
+#define DWT_FUNCTION_CYCMATCH_Pos 7 /*!< DWT FUNCTION: CYCMATCH Position */
+#define DWT_FUNCTION_CYCMATCH_Msk (0x1UL << DWT_FUNCTION_CYCMATCH_Pos) /*!< DWT FUNCTION: CYCMATCH Mask */
+
+#define DWT_FUNCTION_EMITRANGE_Pos 5 /*!< DWT FUNCTION: EMITRANGE Position */
+#define DWT_FUNCTION_EMITRANGE_Msk (0x1UL << DWT_FUNCTION_EMITRANGE_Pos) /*!< DWT FUNCTION: EMITRANGE Mask */
+
+#define DWT_FUNCTION_FUNCTION_Pos 0 /*!< DWT FUNCTION: FUNCTION Position */
+#define DWT_FUNCTION_FUNCTION_Msk (0xFUL << DWT_FUNCTION_FUNCTION_Pos) /*!< DWT FUNCTION: FUNCTION Mask */
+
+/*@}*/ /* end of group CMSIS_DWT */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_TPI Trace Port Interface (TPI)
+ \brief Type definitions for the Trace Port Interface (TPI)
+ @{
+ */
+
+/** \brief Structure type to access the Trace Port Interface Register (TPI).
+ */
+typedef struct
+{
+ __IO uint32_t SSPSR; /*!< Offset: 0x000 (R/ ) Supported Parallel Port Size Register */
+ __IO uint32_t CSPSR; /*!< Offset: 0x004 (R/W) Current Parallel Port Size Register */
+ uint32_t RESERVED0[2];
+ __IO uint32_t ACPR; /*!< Offset: 0x010 (R/W) Asynchronous Clock Prescaler Register */
+ uint32_t RESERVED1[55];
+ __IO uint32_t SPPR; /*!< Offset: 0x0F0 (R/W) Selected Pin Protocol Register */
+ uint32_t RESERVED2[131];
+ __I uint32_t FFSR; /*!< Offset: 0x300 (R/ ) Formatter and Flush Status Register */
+ __IO uint32_t FFCR; /*!< Offset: 0x304 (R/W) Formatter and Flush Control Register */
+ __I uint32_t FSCR; /*!< Offset: 0x308 (R/ ) Formatter Synchronization Counter Register */
+ uint32_t RESERVED3[759];
+ __I uint32_t TRIGGER; /*!< Offset: 0xEE8 (R/ ) TRIGGER */
+ __I uint32_t FIFO0; /*!< Offset: 0xEEC (R/ ) Integration ETM Data */
+ __I uint32_t ITATBCTR2; /*!< Offset: 0xEF0 (R/ ) ITATBCTR2 */
+ uint32_t RESERVED4[1];
+ __I uint32_t ITATBCTR0; /*!< Offset: 0xEF8 (R/ ) ITATBCTR0 */
+ __I uint32_t FIFO1; /*!< Offset: 0xEFC (R/ ) Integration ITM Data */
+ __IO uint32_t ITCTRL; /*!< Offset: 0xF00 (R/W) Integration Mode Control */
+ uint32_t RESERVED5[39];
+ __IO uint32_t CLAIMSET; /*!< Offset: 0xFA0 (R/W) Claim tag set */
+ __IO uint32_t CLAIMCLR; /*!< Offset: 0xFA4 (R/W) Claim tag clear */
+ uint32_t RESERVED7[8];
+ __I uint32_t DEVID; /*!< Offset: 0xFC8 (R/ ) TPIU_DEVID */
+ __I uint32_t DEVTYPE; /*!< Offset: 0xFCC (R/ ) TPIU_DEVTYPE */
+} TPI_Type;
+
+/* TPI Asynchronous Clock Prescaler Register Definitions */
+#define TPI_ACPR_PRESCALER_Pos 0 /*!< TPI ACPR: PRESCALER Position */
+#define TPI_ACPR_PRESCALER_Msk (0x1FFFUL << TPI_ACPR_PRESCALER_Pos) /*!< TPI ACPR: PRESCALER Mask */
+
+/* TPI Selected Pin Protocol Register Definitions */
+#define TPI_SPPR_TXMODE_Pos 0 /*!< TPI SPPR: TXMODE Position */
+#define TPI_SPPR_TXMODE_Msk (0x3UL << TPI_SPPR_TXMODE_Pos) /*!< TPI SPPR: TXMODE Mask */
+
+/* TPI Formatter and Flush Status Register Definitions */
+#define TPI_FFSR_FtNonStop_Pos 3 /*!< TPI FFSR: FtNonStop Position */
+#define TPI_FFSR_FtNonStop_Msk (0x1UL << TPI_FFSR_FtNonStop_Pos) /*!< TPI FFSR: FtNonStop Mask */
+
+#define TPI_FFSR_TCPresent_Pos 2 /*!< TPI FFSR: TCPresent Position */
+#define TPI_FFSR_TCPresent_Msk (0x1UL << TPI_FFSR_TCPresent_Pos) /*!< TPI FFSR: TCPresent Mask */
+
+#define TPI_FFSR_FtStopped_Pos 1 /*!< TPI FFSR: FtStopped Position */
+#define TPI_FFSR_FtStopped_Msk (0x1UL << TPI_FFSR_FtStopped_Pos) /*!< TPI FFSR: FtStopped Mask */
+
+#define TPI_FFSR_FlInProg_Pos 0 /*!< TPI FFSR: FlInProg Position */
+#define TPI_FFSR_FlInProg_Msk (0x1UL << TPI_FFSR_FlInProg_Pos) /*!< TPI FFSR: FlInProg Mask */
+
+/* TPI Formatter and Flush Control Register Definitions */
+#define TPI_FFCR_TrigIn_Pos 8 /*!< TPI FFCR: TrigIn Position */
+#define TPI_FFCR_TrigIn_Msk (0x1UL << TPI_FFCR_TrigIn_Pos) /*!< TPI FFCR: TrigIn Mask */
+
+#define TPI_FFCR_EnFCont_Pos 1 /*!< TPI FFCR: EnFCont Position */
+#define TPI_FFCR_EnFCont_Msk (0x1UL << TPI_FFCR_EnFCont_Pos) /*!< TPI FFCR: EnFCont Mask */
+
+/* TPI TRIGGER Register Definitions */
+#define TPI_TRIGGER_TRIGGER_Pos 0 /*!< TPI TRIGGER: TRIGGER Position */
+#define TPI_TRIGGER_TRIGGER_Msk (0x1UL << TPI_TRIGGER_TRIGGER_Pos) /*!< TPI TRIGGER: TRIGGER Mask */
+
+/* TPI Integration ETM Data Register Definitions (FIFO0) */
+#define TPI_FIFO0_ITM_ATVALID_Pos 29 /*!< TPI FIFO0: ITM_ATVALID Position */
+#define TPI_FIFO0_ITM_ATVALID_Msk (0x3UL << TPI_FIFO0_ITM_ATVALID_Pos) /*!< TPI FIFO0: ITM_ATVALID Mask */
+
+#define TPI_FIFO0_ITM_bytecount_Pos 27 /*!< TPI FIFO0: ITM_bytecount Position */
+#define TPI_FIFO0_ITM_bytecount_Msk (0x3UL << TPI_FIFO0_ITM_bytecount_Pos) /*!< TPI FIFO0: ITM_bytecount Mask */
+
+#define TPI_FIFO0_ETM_ATVALID_Pos 26 /*!< TPI FIFO0: ETM_ATVALID Position */
+#define TPI_FIFO0_ETM_ATVALID_Msk (0x3UL << TPI_FIFO0_ETM_ATVALID_Pos) /*!< TPI FIFO0: ETM_ATVALID Mask */
+
+#define TPI_FIFO0_ETM_bytecount_Pos 24 /*!< TPI FIFO0: ETM_bytecount Position */
+#define TPI_FIFO0_ETM_bytecount_Msk (0x3UL << TPI_FIFO0_ETM_bytecount_Pos) /*!< TPI FIFO0: ETM_bytecount Mask */
+
+#define TPI_FIFO0_ETM2_Pos 16 /*!< TPI FIFO0: ETM2 Position */
+#define TPI_FIFO0_ETM2_Msk (0xFFUL << TPI_FIFO0_ETM2_Pos) /*!< TPI FIFO0: ETM2 Mask */
+
+#define TPI_FIFO0_ETM1_Pos 8 /*!< TPI FIFO0: ETM1 Position */
+#define TPI_FIFO0_ETM1_Msk (0xFFUL << TPI_FIFO0_ETM1_Pos) /*!< TPI FIFO0: ETM1 Mask */
+
+#define TPI_FIFO0_ETM0_Pos 0 /*!< TPI FIFO0: ETM0 Position */
+#define TPI_FIFO0_ETM0_Msk (0xFFUL << TPI_FIFO0_ETM0_Pos) /*!< TPI FIFO0: ETM0 Mask */
+
+/* TPI ITATBCTR2 Register Definitions */
+#define TPI_ITATBCTR2_ATREADY_Pos 0 /*!< TPI ITATBCTR2: ATREADY Position */
+#define TPI_ITATBCTR2_ATREADY_Msk (0x1UL << TPI_ITATBCTR2_ATREADY_Pos) /*!< TPI ITATBCTR2: ATREADY Mask */
+
+/* TPI Integration ITM Data Register Definitions (FIFO1) */
+#define TPI_FIFO1_ITM_ATVALID_Pos 29 /*!< TPI FIFO1: ITM_ATVALID Position */
+#define TPI_FIFO1_ITM_ATVALID_Msk (0x3UL << TPI_FIFO1_ITM_ATVALID_Pos) /*!< TPI FIFO1: ITM_ATVALID Mask */
+
+#define TPI_FIFO1_ITM_bytecount_Pos 27 /*!< TPI FIFO1: ITM_bytecount Position */
+#define TPI_FIFO1_ITM_bytecount_Msk (0x3UL << TPI_FIFO1_ITM_bytecount_Pos) /*!< TPI FIFO1: ITM_bytecount Mask */
+
+#define TPI_FIFO1_ETM_ATVALID_Pos 26 /*!< TPI FIFO1: ETM_ATVALID Position */
+#define TPI_FIFO1_ETM_ATVALID_Msk (0x3UL << TPI_FIFO1_ETM_ATVALID_Pos) /*!< TPI FIFO1: ETM_ATVALID Mask */
+
+#define TPI_FIFO1_ETM_bytecount_Pos 24 /*!< TPI FIFO1: ETM_bytecount Position */
+#define TPI_FIFO1_ETM_bytecount_Msk (0x3UL << TPI_FIFO1_ETM_bytecount_Pos) /*!< TPI FIFO1: ETM_bytecount Mask */
+
+#define TPI_FIFO1_ITM2_Pos 16 /*!< TPI FIFO1: ITM2 Position */
+#define TPI_FIFO1_ITM2_Msk (0xFFUL << TPI_FIFO1_ITM2_Pos) /*!< TPI FIFO1: ITM2 Mask */
+
+#define TPI_FIFO1_ITM1_Pos 8 /*!< TPI FIFO1: ITM1 Position */
+#define TPI_FIFO1_ITM1_Msk (0xFFUL << TPI_FIFO1_ITM1_Pos) /*!< TPI FIFO1: ITM1 Mask */
+
+#define TPI_FIFO1_ITM0_Pos 0 /*!< TPI FIFO1: ITM0 Position */
+#define TPI_FIFO1_ITM0_Msk (0xFFUL << TPI_FIFO1_ITM0_Pos) /*!< TPI FIFO1: ITM0 Mask */
+
+/* TPI ITATBCTR0 Register Definitions */
+#define TPI_ITATBCTR0_ATREADY_Pos 0 /*!< TPI ITATBCTR0: ATREADY Position */
+#define TPI_ITATBCTR0_ATREADY_Msk (0x1UL << TPI_ITATBCTR0_ATREADY_Pos) /*!< TPI ITATBCTR0: ATREADY Mask */
+
+/* TPI Integration Mode Control Register Definitions */
+#define TPI_ITCTRL_Mode_Pos 0 /*!< TPI ITCTRL: Mode Position */
+#define TPI_ITCTRL_Mode_Msk (0x1UL << TPI_ITCTRL_Mode_Pos) /*!< TPI ITCTRL: Mode Mask */
+
+/* TPI DEVID Register Definitions */
+#define TPI_DEVID_NRZVALID_Pos 11 /*!< TPI DEVID: NRZVALID Position */
+#define TPI_DEVID_NRZVALID_Msk (0x1UL << TPI_DEVID_NRZVALID_Pos) /*!< TPI DEVID: NRZVALID Mask */
+
+#define TPI_DEVID_MANCVALID_Pos 10 /*!< TPI DEVID: MANCVALID Position */
+#define TPI_DEVID_MANCVALID_Msk (0x1UL << TPI_DEVID_MANCVALID_Pos) /*!< TPI DEVID: MANCVALID Mask */
+
+#define TPI_DEVID_PTINVALID_Pos 9 /*!< TPI DEVID: PTINVALID Position */
+#define TPI_DEVID_PTINVALID_Msk (0x1UL << TPI_DEVID_PTINVALID_Pos) /*!< TPI DEVID: PTINVALID Mask */
+
+#define TPI_DEVID_MinBufSz_Pos 6 /*!< TPI DEVID: MinBufSz Position */
+#define TPI_DEVID_MinBufSz_Msk (0x7UL << TPI_DEVID_MinBufSz_Pos) /*!< TPI DEVID: MinBufSz Mask */
+
+#define TPI_DEVID_AsynClkIn_Pos 5 /*!< TPI DEVID: AsynClkIn Position */
+#define TPI_DEVID_AsynClkIn_Msk (0x1UL << TPI_DEVID_AsynClkIn_Pos) /*!< TPI DEVID: AsynClkIn Mask */
+
+#define TPI_DEVID_NrTraceInput_Pos 0 /*!< TPI DEVID: NrTraceInput Position */
+#define TPI_DEVID_NrTraceInput_Msk (0x1FUL << TPI_DEVID_NrTraceInput_Pos) /*!< TPI DEVID: NrTraceInput Mask */
+
+/* TPI DEVTYPE Register Definitions */
+#define TPI_DEVTYPE_SubType_Pos 0 /*!< TPI DEVTYPE: SubType Position */
+#define TPI_DEVTYPE_SubType_Msk (0xFUL << TPI_DEVTYPE_SubType_Pos) /*!< TPI DEVTYPE: SubType Mask */
+
+#define TPI_DEVTYPE_MajorType_Pos 4 /*!< TPI DEVTYPE: MajorType Position */
+#define TPI_DEVTYPE_MajorType_Msk (0xFUL << TPI_DEVTYPE_MajorType_Pos) /*!< TPI DEVTYPE: MajorType Mask */
+
+/*@}*/ /* end of group CMSIS_TPI */
+
+
+#if (__MPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_MPU Memory Protection Unit (MPU)
+ \brief Type definitions for the Memory Protection Unit (MPU)
+ @{
+ */
+
+/** \brief Structure type to access the Memory Protection Unit (MPU).
+ */
+typedef struct
+{
+ __I uint32_t TYPE; /*!< Offset: 0x000 (R/ ) MPU Type Register */
+ __IO uint32_t CTRL; /*!< Offset: 0x004 (R/W) MPU Control Register */
+ __IO uint32_t RNR; /*!< Offset: 0x008 (R/W) MPU Region RNRber Register */
+ __IO uint32_t RBAR; /*!< Offset: 0x00C (R/W) MPU Region Base Address Register */
+ __IO uint32_t RASR; /*!< Offset: 0x010 (R/W) MPU Region Attribute and Size Register */
+ __IO uint32_t RBAR_A1; /*!< Offset: 0x014 (R/W) MPU Alias 1 Region Base Address Register */
+ __IO uint32_t RASR_A1; /*!< Offset: 0x018 (R/W) MPU Alias 1 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A2; /*!< Offset: 0x01C (R/W) MPU Alias 2 Region Base Address Register */
+ __IO uint32_t RASR_A2; /*!< Offset: 0x020 (R/W) MPU Alias 2 Region Attribute and Size Register */
+ __IO uint32_t RBAR_A3; /*!< Offset: 0x024 (R/W) MPU Alias 3 Region Base Address Register */
+ __IO uint32_t RASR_A3; /*!< Offset: 0x028 (R/W) MPU Alias 3 Region Attribute and Size Register */
+} MPU_Type;
+
+/* MPU Type Register */
+#define MPU_TYPE_IREGION_Pos 16 /*!< MPU TYPE: IREGION Position */
+#define MPU_TYPE_IREGION_Msk (0xFFUL << MPU_TYPE_IREGION_Pos) /*!< MPU TYPE: IREGION Mask */
+
+#define MPU_TYPE_DREGION_Pos 8 /*!< MPU TYPE: DREGION Position */
+#define MPU_TYPE_DREGION_Msk (0xFFUL << MPU_TYPE_DREGION_Pos) /*!< MPU TYPE: DREGION Mask */
+
+#define MPU_TYPE_SEPARATE_Pos 0 /*!< MPU TYPE: SEPARATE Position */
+#define MPU_TYPE_SEPARATE_Msk (1UL << MPU_TYPE_SEPARATE_Pos) /*!< MPU TYPE: SEPARATE Mask */
+
+/* MPU Control Register */
+#define MPU_CTRL_PRIVDEFENA_Pos 2 /*!< MPU CTRL: PRIVDEFENA Position */
+#define MPU_CTRL_PRIVDEFENA_Msk (1UL << MPU_CTRL_PRIVDEFENA_Pos) /*!< MPU CTRL: PRIVDEFENA Mask */
+
+#define MPU_CTRL_HFNMIENA_Pos 1 /*!< MPU CTRL: HFNMIENA Position */
+#define MPU_CTRL_HFNMIENA_Msk (1UL << MPU_CTRL_HFNMIENA_Pos) /*!< MPU CTRL: HFNMIENA Mask */
+
+#define MPU_CTRL_ENABLE_Pos 0 /*!< MPU CTRL: ENABLE Position */
+#define MPU_CTRL_ENABLE_Msk (1UL << MPU_CTRL_ENABLE_Pos) /*!< MPU CTRL: ENABLE Mask */
+
+/* MPU Region Number Register */
+#define MPU_RNR_REGION_Pos 0 /*!< MPU RNR: REGION Position */
+#define MPU_RNR_REGION_Msk (0xFFUL << MPU_RNR_REGION_Pos) /*!< MPU RNR: REGION Mask */
+
+/* MPU Region Base Address Register */
+#define MPU_RBAR_ADDR_Pos 5 /*!< MPU RBAR: ADDR Position */
+#define MPU_RBAR_ADDR_Msk (0x7FFFFFFUL << MPU_RBAR_ADDR_Pos) /*!< MPU RBAR: ADDR Mask */
+
+#define MPU_RBAR_VALID_Pos 4 /*!< MPU RBAR: VALID Position */
+#define MPU_RBAR_VALID_Msk (1UL << MPU_RBAR_VALID_Pos) /*!< MPU RBAR: VALID Mask */
+
+#define MPU_RBAR_REGION_Pos 0 /*!< MPU RBAR: REGION Position */
+#define MPU_RBAR_REGION_Msk (0xFUL << MPU_RBAR_REGION_Pos) /*!< MPU RBAR: REGION Mask */
+
+/* MPU Region Attribute and Size Register */
+#define MPU_RASR_ATTRS_Pos 16 /*!< MPU RASR: MPU Region Attribute field Position */
+#define MPU_RASR_ATTRS_Msk (0xFFFFUL << MPU_RASR_ATTRS_Pos) /*!< MPU RASR: MPU Region Attribute field Mask */
+
+#define MPU_RASR_XN_Pos 28 /*!< MPU RASR: ATTRS.XN Position */
+#define MPU_RASR_XN_Msk (1UL << MPU_RASR_XN_Pos) /*!< MPU RASR: ATTRS.XN Mask */
+
+#define MPU_RASR_AP_Pos 24 /*!< MPU RASR: ATTRS.AP Position */
+#define MPU_RASR_AP_Msk (0x7UL << MPU_RASR_AP_Pos) /*!< MPU RASR: ATTRS.AP Mask */
+
+#define MPU_RASR_TEX_Pos 19 /*!< MPU RASR: ATTRS.TEX Position */
+#define MPU_RASR_TEX_Msk (0x7UL << MPU_RASR_TEX_Pos) /*!< MPU RASR: ATTRS.TEX Mask */
+
+#define MPU_RASR_S_Pos 18 /*!< MPU RASR: ATTRS.S Position */
+#define MPU_RASR_S_Msk (1UL << MPU_RASR_S_Pos) /*!< MPU RASR: ATTRS.S Mask */
+
+#define MPU_RASR_C_Pos 17 /*!< MPU RASR: ATTRS.C Position */
+#define MPU_RASR_C_Msk (1UL << MPU_RASR_C_Pos) /*!< MPU RASR: ATTRS.C Mask */
+
+#define MPU_RASR_B_Pos 16 /*!< MPU RASR: ATTRS.B Position */
+#define MPU_RASR_B_Msk (1UL << MPU_RASR_B_Pos) /*!< MPU RASR: ATTRS.B Mask */
+
+#define MPU_RASR_SRD_Pos 8 /*!< MPU RASR: Sub-Region Disable Position */
+#define MPU_RASR_SRD_Msk (0xFFUL << MPU_RASR_SRD_Pos) /*!< MPU RASR: Sub-Region Disable Mask */
+
+#define MPU_RASR_SIZE_Pos 1 /*!< MPU RASR: Region Size Field Position */
+#define MPU_RASR_SIZE_Msk (0x1FUL << MPU_RASR_SIZE_Pos) /*!< MPU RASR: Region Size Field Mask */
+
+#define MPU_RASR_ENABLE_Pos 0 /*!< MPU RASR: Region enable bit Position */
+#define MPU_RASR_ENABLE_Msk (1UL << MPU_RASR_ENABLE_Pos) /*!< MPU RASR: Region enable bit Disable Mask */
+
+/*@} end of group CMSIS_MPU */
+#endif
+
+
+#if (__FPU_PRESENT == 1)
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_FPU Floating Point Unit (FPU)
+ \brief Type definitions for the Floating Point Unit (FPU)
+ @{
+ */
+
+/** \brief Structure type to access the Floating Point Unit (FPU).
+ */
+typedef struct
+{
+ uint32_t RESERVED0[1];
+ __IO uint32_t FPCCR; /*!< Offset: 0x004 (R/W) Floating-Point Context Control Register */
+ __IO uint32_t FPCAR; /*!< Offset: 0x008 (R/W) Floating-Point Context Address Register */
+ __IO uint32_t FPDSCR; /*!< Offset: 0x00C (R/W) Floating-Point Default Status Control Register */
+ __I uint32_t MVFR0; /*!< Offset: 0x010 (R/ ) Media and FP Feature Register 0 */
+ __I uint32_t MVFR1; /*!< Offset: 0x014 (R/ ) Media and FP Feature Register 1 */
+} FPU_Type;
+
+/* Floating-Point Context Control Register */
+#define FPU_FPCCR_ASPEN_Pos 31 /*!< FPCCR: ASPEN bit Position */
+#define FPU_FPCCR_ASPEN_Msk (1UL << FPU_FPCCR_ASPEN_Pos) /*!< FPCCR: ASPEN bit Mask */
+
+#define FPU_FPCCR_LSPEN_Pos 30 /*!< FPCCR: LSPEN Position */
+#define FPU_FPCCR_LSPEN_Msk (1UL << FPU_FPCCR_LSPEN_Pos) /*!< FPCCR: LSPEN bit Mask */
+
+#define FPU_FPCCR_MONRDY_Pos 8 /*!< FPCCR: MONRDY Position */
+#define FPU_FPCCR_MONRDY_Msk (1UL << FPU_FPCCR_MONRDY_Pos) /*!< FPCCR: MONRDY bit Mask */
+
+#define FPU_FPCCR_BFRDY_Pos 6 /*!< FPCCR: BFRDY Position */
+#define FPU_FPCCR_BFRDY_Msk (1UL << FPU_FPCCR_BFRDY_Pos) /*!< FPCCR: BFRDY bit Mask */
+
+#define FPU_FPCCR_MMRDY_Pos 5 /*!< FPCCR: MMRDY Position */
+#define FPU_FPCCR_MMRDY_Msk (1UL << FPU_FPCCR_MMRDY_Pos) /*!< FPCCR: MMRDY bit Mask */
+
+#define FPU_FPCCR_HFRDY_Pos 4 /*!< FPCCR: HFRDY Position */
+#define FPU_FPCCR_HFRDY_Msk (1UL << FPU_FPCCR_HFRDY_Pos) /*!< FPCCR: HFRDY bit Mask */
+
+#define FPU_FPCCR_THREAD_Pos 3 /*!< FPCCR: processor mode bit Position */
+#define FPU_FPCCR_THREAD_Msk (1UL << FPU_FPCCR_THREAD_Pos) /*!< FPCCR: processor mode active bit Mask */
+
+#define FPU_FPCCR_USER_Pos 1 /*!< FPCCR: privilege level bit Position */
+#define FPU_FPCCR_USER_Msk (1UL << FPU_FPCCR_USER_Pos) /*!< FPCCR: privilege level bit Mask */
+
+#define FPU_FPCCR_LSPACT_Pos 0 /*!< FPCCR: Lazy state preservation active bit Position */
+#define FPU_FPCCR_LSPACT_Msk (1UL << FPU_FPCCR_LSPACT_Pos) /*!< FPCCR: Lazy state preservation active bit Mask */
+
+/* Floating-Point Context Address Register */
+#define FPU_FPCAR_ADDRESS_Pos 3 /*!< FPCAR: ADDRESS bit Position */
+#define FPU_FPCAR_ADDRESS_Msk (0x1FFFFFFFUL << FPU_FPCAR_ADDRESS_Pos) /*!< FPCAR: ADDRESS bit Mask */
+
+/* Floating-Point Default Status Control Register */
+#define FPU_FPDSCR_AHP_Pos 26 /*!< FPDSCR: AHP bit Position */
+#define FPU_FPDSCR_AHP_Msk (1UL << FPU_FPDSCR_AHP_Pos) /*!< FPDSCR: AHP bit Mask */
+
+#define FPU_FPDSCR_DN_Pos 25 /*!< FPDSCR: DN bit Position */
+#define FPU_FPDSCR_DN_Msk (1UL << FPU_FPDSCR_DN_Pos) /*!< FPDSCR: DN bit Mask */
+
+#define FPU_FPDSCR_FZ_Pos 24 /*!< FPDSCR: FZ bit Position */
+#define FPU_FPDSCR_FZ_Msk (1UL << FPU_FPDSCR_FZ_Pos) /*!< FPDSCR: FZ bit Mask */
+
+#define FPU_FPDSCR_RMode_Pos 22 /*!< FPDSCR: RMode bit Position */
+#define FPU_FPDSCR_RMode_Msk (3UL << FPU_FPDSCR_RMode_Pos) /*!< FPDSCR: RMode bit Mask */
+
+/* Media and FP Feature Register 0 */
+#define FPU_MVFR0_FP_rounding_modes_Pos 28 /*!< MVFR0: FP rounding modes bits Position */
+#define FPU_MVFR0_FP_rounding_modes_Msk (0xFUL << FPU_MVFR0_FP_rounding_modes_Pos) /*!< MVFR0: FP rounding modes bits Mask */
+
+#define FPU_MVFR0_Short_vectors_Pos 24 /*!< MVFR0: Short vectors bits Position */
+#define FPU_MVFR0_Short_vectors_Msk (0xFUL << FPU_MVFR0_Short_vectors_Pos) /*!< MVFR0: Short vectors bits Mask */
+
+#define FPU_MVFR0_Square_root_Pos 20 /*!< MVFR0: Square root bits Position */
+#define FPU_MVFR0_Square_root_Msk (0xFUL << FPU_MVFR0_Square_root_Pos) /*!< MVFR0: Square root bits Mask */
+
+#define FPU_MVFR0_Divide_Pos 16 /*!< MVFR0: Divide bits Position */
+#define FPU_MVFR0_Divide_Msk (0xFUL << FPU_MVFR0_Divide_Pos) /*!< MVFR0: Divide bits Mask */
+
+#define FPU_MVFR0_FP_excep_trapping_Pos 12 /*!< MVFR0: FP exception trapping bits Position */
+#define FPU_MVFR0_FP_excep_trapping_Msk (0xFUL << FPU_MVFR0_FP_excep_trapping_Pos) /*!< MVFR0: FP exception trapping bits Mask */
+
+#define FPU_MVFR0_Double_precision_Pos 8 /*!< MVFR0: Double-precision bits Position */
+#define FPU_MVFR0_Double_precision_Msk (0xFUL << FPU_MVFR0_Double_precision_Pos) /*!< MVFR0: Double-precision bits Mask */
+
+#define FPU_MVFR0_Single_precision_Pos 4 /*!< MVFR0: Single-precision bits Position */
+#define FPU_MVFR0_Single_precision_Msk (0xFUL << FPU_MVFR0_Single_precision_Pos) /*!< MVFR0: Single-precision bits Mask */
+
+#define FPU_MVFR0_A_SIMD_registers_Pos 0 /*!< MVFR0: A_SIMD registers bits Position */
+#define FPU_MVFR0_A_SIMD_registers_Msk (0xFUL << FPU_MVFR0_A_SIMD_registers_Pos) /*!< MVFR0: A_SIMD registers bits Mask */
+
+/* Media and FP Feature Register 1 */
+#define FPU_MVFR1_FP_fused_MAC_Pos 28 /*!< MVFR1: FP fused MAC bits Position */
+#define FPU_MVFR1_FP_fused_MAC_Msk (0xFUL << FPU_MVFR1_FP_fused_MAC_Pos) /*!< MVFR1: FP fused MAC bits Mask */
+
+#define FPU_MVFR1_FP_HPFP_Pos 24 /*!< MVFR1: FP HPFP bits Position */
+#define FPU_MVFR1_FP_HPFP_Msk (0xFUL << FPU_MVFR1_FP_HPFP_Pos) /*!< MVFR1: FP HPFP bits Mask */
+
+#define FPU_MVFR1_D_NaN_mode_Pos 4 /*!< MVFR1: D_NaN mode bits Position */
+#define FPU_MVFR1_D_NaN_mode_Msk (0xFUL << FPU_MVFR1_D_NaN_mode_Pos) /*!< MVFR1: D_NaN mode bits Mask */
+
+#define FPU_MVFR1_FtZ_mode_Pos 0 /*!< MVFR1: FtZ mode bits Position */
+#define FPU_MVFR1_FtZ_mode_Msk (0xFUL << FPU_MVFR1_FtZ_mode_Pos) /*!< MVFR1: FtZ mode bits Mask */
+
+/*@} end of group CMSIS_FPU */
+#endif
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Type definitions for the Core Debug Registers
+ @{
+ */
+
+/** \brief Structure type to access the Core Debug Register (CoreDebug).
+ */
+typedef struct
+{
+ __IO uint32_t DHCSR; /*!< Offset: 0x000 (R/W) Debug Halting Control and Status Register */
+ __O uint32_t DCRSR; /*!< Offset: 0x004 ( /W) Debug Core Register Selector Register */
+ __IO uint32_t DCRDR; /*!< Offset: 0x008 (R/W) Debug Core Register Data Register */
+ __IO uint32_t DEMCR; /*!< Offset: 0x00C (R/W) Debug Exception and Monitor Control Register */
+} CoreDebug_Type;
+
+/* Debug Halting Control and Status Register */
+#define CoreDebug_DHCSR_DBGKEY_Pos 16 /*!< CoreDebug DHCSR: DBGKEY Position */
+#define CoreDebug_DHCSR_DBGKEY_Msk (0xFFFFUL << CoreDebug_DHCSR_DBGKEY_Pos) /*!< CoreDebug DHCSR: DBGKEY Mask */
+
+#define CoreDebug_DHCSR_S_RESET_ST_Pos 25 /*!< CoreDebug DHCSR: S_RESET_ST Position */
+#define CoreDebug_DHCSR_S_RESET_ST_Msk (1UL << CoreDebug_DHCSR_S_RESET_ST_Pos) /*!< CoreDebug DHCSR: S_RESET_ST Mask */
+
+#define CoreDebug_DHCSR_S_RETIRE_ST_Pos 24 /*!< CoreDebug DHCSR: S_RETIRE_ST Position */
+#define CoreDebug_DHCSR_S_RETIRE_ST_Msk (1UL << CoreDebug_DHCSR_S_RETIRE_ST_Pos) /*!< CoreDebug DHCSR: S_RETIRE_ST Mask */
+
+#define CoreDebug_DHCSR_S_LOCKUP_Pos 19 /*!< CoreDebug DHCSR: S_LOCKUP Position */
+#define CoreDebug_DHCSR_S_LOCKUP_Msk (1UL << CoreDebug_DHCSR_S_LOCKUP_Pos) /*!< CoreDebug DHCSR: S_LOCKUP Mask */
+
+#define CoreDebug_DHCSR_S_SLEEP_Pos 18 /*!< CoreDebug DHCSR: S_SLEEP Position */
+#define CoreDebug_DHCSR_S_SLEEP_Msk (1UL << CoreDebug_DHCSR_S_SLEEP_Pos) /*!< CoreDebug DHCSR: S_SLEEP Mask */
+
+#define CoreDebug_DHCSR_S_HALT_Pos 17 /*!< CoreDebug DHCSR: S_HALT Position */
+#define CoreDebug_DHCSR_S_HALT_Msk (1UL << CoreDebug_DHCSR_S_HALT_Pos) /*!< CoreDebug DHCSR: S_HALT Mask */
+
+#define CoreDebug_DHCSR_S_REGRDY_Pos 16 /*!< CoreDebug DHCSR: S_REGRDY Position */
+#define CoreDebug_DHCSR_S_REGRDY_Msk (1UL << CoreDebug_DHCSR_S_REGRDY_Pos) /*!< CoreDebug DHCSR: S_REGRDY Mask */
+
+#define CoreDebug_DHCSR_C_SNAPSTALL_Pos 5 /*!< CoreDebug DHCSR: C_SNAPSTALL Position */
+#define CoreDebug_DHCSR_C_SNAPSTALL_Msk (1UL << CoreDebug_DHCSR_C_SNAPSTALL_Pos) /*!< CoreDebug DHCSR: C_SNAPSTALL Mask */
+
+#define CoreDebug_DHCSR_C_MASKINTS_Pos 3 /*!< CoreDebug DHCSR: C_MASKINTS Position */
+#define CoreDebug_DHCSR_C_MASKINTS_Msk (1UL << CoreDebug_DHCSR_C_MASKINTS_Pos) /*!< CoreDebug DHCSR: C_MASKINTS Mask */
+
+#define CoreDebug_DHCSR_C_STEP_Pos 2 /*!< CoreDebug DHCSR: C_STEP Position */
+#define CoreDebug_DHCSR_C_STEP_Msk (1UL << CoreDebug_DHCSR_C_STEP_Pos) /*!< CoreDebug DHCSR: C_STEP Mask */
+
+#define CoreDebug_DHCSR_C_HALT_Pos 1 /*!< CoreDebug DHCSR: C_HALT Position */
+#define CoreDebug_DHCSR_C_HALT_Msk (1UL << CoreDebug_DHCSR_C_HALT_Pos) /*!< CoreDebug DHCSR: C_HALT Mask */
+
+#define CoreDebug_DHCSR_C_DEBUGEN_Pos 0 /*!< CoreDebug DHCSR: C_DEBUGEN Position */
+#define CoreDebug_DHCSR_C_DEBUGEN_Msk (1UL << CoreDebug_DHCSR_C_DEBUGEN_Pos) /*!< CoreDebug DHCSR: C_DEBUGEN Mask */
+
+/* Debug Core Register Selector Register */
+#define CoreDebug_DCRSR_REGWnR_Pos 16 /*!< CoreDebug DCRSR: REGWnR Position */
+#define CoreDebug_DCRSR_REGWnR_Msk (1UL << CoreDebug_DCRSR_REGWnR_Pos) /*!< CoreDebug DCRSR: REGWnR Mask */
+
+#define CoreDebug_DCRSR_REGSEL_Pos 0 /*!< CoreDebug DCRSR: REGSEL Position */
+#define CoreDebug_DCRSR_REGSEL_Msk (0x1FUL << CoreDebug_DCRSR_REGSEL_Pos) /*!< CoreDebug DCRSR: REGSEL Mask */
+
+/* Debug Exception and Monitor Control Register */
+#define CoreDebug_DEMCR_TRCENA_Pos 24 /*!< CoreDebug DEMCR: TRCENA Position */
+#define CoreDebug_DEMCR_TRCENA_Msk (1UL << CoreDebug_DEMCR_TRCENA_Pos) /*!< CoreDebug DEMCR: TRCENA Mask */
+
+#define CoreDebug_DEMCR_MON_REQ_Pos 19 /*!< CoreDebug DEMCR: MON_REQ Position */
+#define CoreDebug_DEMCR_MON_REQ_Msk (1UL << CoreDebug_DEMCR_MON_REQ_Pos) /*!< CoreDebug DEMCR: MON_REQ Mask */
+
+#define CoreDebug_DEMCR_MON_STEP_Pos 18 /*!< CoreDebug DEMCR: MON_STEP Position */
+#define CoreDebug_DEMCR_MON_STEP_Msk (1UL << CoreDebug_DEMCR_MON_STEP_Pos) /*!< CoreDebug DEMCR: MON_STEP Mask */
+
+#define CoreDebug_DEMCR_MON_PEND_Pos 17 /*!< CoreDebug DEMCR: MON_PEND Position */
+#define CoreDebug_DEMCR_MON_PEND_Msk (1UL << CoreDebug_DEMCR_MON_PEND_Pos) /*!< CoreDebug DEMCR: MON_PEND Mask */
+
+#define CoreDebug_DEMCR_MON_EN_Pos 16 /*!< CoreDebug DEMCR: MON_EN Position */
+#define CoreDebug_DEMCR_MON_EN_Msk (1UL << CoreDebug_DEMCR_MON_EN_Pos) /*!< CoreDebug DEMCR: MON_EN Mask */
+
+#define CoreDebug_DEMCR_VC_HARDERR_Pos 10 /*!< CoreDebug DEMCR: VC_HARDERR Position */
+#define CoreDebug_DEMCR_VC_HARDERR_Msk (1UL << CoreDebug_DEMCR_VC_HARDERR_Pos) /*!< CoreDebug DEMCR: VC_HARDERR Mask */
+
+#define CoreDebug_DEMCR_VC_INTERR_Pos 9 /*!< CoreDebug DEMCR: VC_INTERR Position */
+#define CoreDebug_DEMCR_VC_INTERR_Msk (1UL << CoreDebug_DEMCR_VC_INTERR_Pos) /*!< CoreDebug DEMCR: VC_INTERR Mask */
+
+#define CoreDebug_DEMCR_VC_BUSERR_Pos 8 /*!< CoreDebug DEMCR: VC_BUSERR Position */
+#define CoreDebug_DEMCR_VC_BUSERR_Msk (1UL << CoreDebug_DEMCR_VC_BUSERR_Pos) /*!< CoreDebug DEMCR: VC_BUSERR Mask */
+
+#define CoreDebug_DEMCR_VC_STATERR_Pos 7 /*!< CoreDebug DEMCR: VC_STATERR Position */
+#define CoreDebug_DEMCR_VC_STATERR_Msk (1UL << CoreDebug_DEMCR_VC_STATERR_Pos) /*!< CoreDebug DEMCR: VC_STATERR Mask */
+
+#define CoreDebug_DEMCR_VC_CHKERR_Pos 6 /*!< CoreDebug DEMCR: VC_CHKERR Position */
+#define CoreDebug_DEMCR_VC_CHKERR_Msk (1UL << CoreDebug_DEMCR_VC_CHKERR_Pos) /*!< CoreDebug DEMCR: VC_CHKERR Mask */
+
+#define CoreDebug_DEMCR_VC_NOCPERR_Pos 5 /*!< CoreDebug DEMCR: VC_NOCPERR Position */
+#define CoreDebug_DEMCR_VC_NOCPERR_Msk (1UL << CoreDebug_DEMCR_VC_NOCPERR_Pos) /*!< CoreDebug DEMCR: VC_NOCPERR Mask */
+
+#define CoreDebug_DEMCR_VC_MMERR_Pos 4 /*!< CoreDebug DEMCR: VC_MMERR Position */
+#define CoreDebug_DEMCR_VC_MMERR_Msk (1UL << CoreDebug_DEMCR_VC_MMERR_Pos) /*!< CoreDebug DEMCR: VC_MMERR Mask */
+
+#define CoreDebug_DEMCR_VC_CORERESET_Pos 0 /*!< CoreDebug DEMCR: VC_CORERESET Position */
+#define CoreDebug_DEMCR_VC_CORERESET_Msk (1UL << CoreDebug_DEMCR_VC_CORERESET_Pos) /*!< CoreDebug DEMCR: VC_CORERESET Mask */
+
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M4 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define ITM_BASE (0xE0000000UL) /*!< ITM Base Address */
+#define DWT_BASE (0xE0001000UL) /*!< DWT Base Address */
+#define TPI_BASE (0xE0040000UL) /*!< TPI Base Address */
+#define CoreDebug_BASE (0xE000EDF0UL) /*!< Core Debug Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCnSCB ((SCnSCB_Type *) SCS_BASE ) /*!< System control Register not in SCB */
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+#define ITM ((ITM_Type *) ITM_BASE ) /*!< ITM configuration struct */
+#define DWT ((DWT_Type *) DWT_BASE ) /*!< DWT configuration struct */
+#define TPI ((TPI_Type *) TPI_BASE ) /*!< TPI configuration struct */
+#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */
+
+#if (__MPU_PRESENT == 1)
+ #define MPU_BASE (SCS_BASE + 0x0D90UL) /*!< Memory Protection Unit */
+ #define MPU ((MPU_Type *) MPU_BASE ) /*!< Memory Protection Unit */
+#endif
+
+#if (__FPU_PRESENT == 1)
+ #define FPU_BASE (SCS_BASE + 0x0F30UL) /*!< Floating Point Unit */
+ #define FPU ((FPU_Type *) FPU_BASE ) /*!< Floating Point Unit */
+#endif
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Debug Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/** \brief Set Priority Grouping
+
+ The function sets the priority grouping field using the required unlock sequence.
+ The parameter PriorityGroup is assigned to the field SCB->AIRCR [10:8] PRIGROUP field.
+ Only values from 0..7 are used.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the smallest possible priority group is set.
+
+ \param [in] PriorityGroup Priority grouping field.
+ */
+__STATIC_INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
+{
+ uint32_t reg_value;
+ uint32_t PriorityGroupTmp = (PriorityGroup & (uint32_t)0x07); /* only values 0..7 are used */
+
+ reg_value = SCB->AIRCR; /* read old register configuration */
+ reg_value &= ~(SCB_AIRCR_VECTKEY_Msk | SCB_AIRCR_PRIGROUP_Msk); /* clear bits to change */
+ reg_value = (reg_value |
+ ((uint32_t)0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (PriorityGroupTmp << 8)); /* Insert write key and priorty group */
+ SCB->AIRCR = reg_value;
+}
+
+
+/** \brief Get Priority Grouping
+
+ The function reads the priority grouping field from the NVIC Interrupt Controller.
+
+ \return Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field).
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriorityGrouping(void)
+{
+ return ((SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) >> SCB_AIRCR_PRIGROUP_Pos); /* read priority grouping field */
+}
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+/* NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); enable interrupt */
+ NVIC->ISER[(uint32_t)((int32_t)IRQn) >> 5] = (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F)); /* enable interrupt */
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Get Active Interrupt
+
+ The function reads the active register in NVIC and returns the active bit.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not active.
+ \return 1 Interrupt status is active.
+ */
+__STATIC_INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn)
+{
+ return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M System Interrupts */
+ else {
+ NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M system interrupts */
+ else {
+ return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief Encode Priority
+
+ The function encodes the priority for an interrupt with the given priority group,
+ preemptive priority value, and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS), the samllest possible priority group is set.
+
+ \param [in] PriorityGroup Used priority group.
+ \param [in] PreemptPriority Preemptive priority value (starting from 0).
+ \param [in] SubPriority Subpriority value (starting from 0).
+ \return Encoded priority. Value can be used in the function \ref NVIC_SetPriority().
+ */
+__STATIC_INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ return (
+ ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) |
+ ((SubPriority & ((1 << (SubPriorityBits )) - 1)))
+ );
+}
+
+
+/** \brief Decode Priority
+
+ The function decodes an interrupt priority value with a given priority group to
+ preemptive priority value and subpriority value.
+ In case of a conflict between priority grouping and available
+ priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set.
+
+ \param [in] Priority Priority value, which can be retrieved with the function \ref NVIC_GetPriority().
+ \param [in] PriorityGroup Used priority group.
+ \param [out] pPreemptPriority Preemptive priority value (starting from 0).
+ \param [out] pSubPriority Subpriority value (starting from 0).
+ */
+__STATIC_INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)
+{
+ uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */
+ uint32_t PreemptPriorityBits;
+ uint32_t SubPriorityBits;
+
+ PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp;
+ SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS;
+
+ *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1);
+ *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1);
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ (SCB->AIRCR & SCB_AIRCR_PRIGROUP_Msk) |
+ SCB_AIRCR_SYSRESETREQ_Msk); /* Keep priority group unchanged */
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable <b>__Vendor_SysTickConfig</b> is set to 1, then the
+ function <b>SysTick_Config</b> is not included. In this case, the file <b><i>device</i>.h</b>
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+/* ##################################### Debug In/Output function ########################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_core_DebugFunctions ITM Functions
+ \brief Functions that access the ITM debug interface.
+ @{
+ */
+
+extern volatile int32_t ITM_RxBuffer; /*!< External variable to receive characters. */
+#define ITM_RXBUFFER_EMPTY 0x5AA55AA5 /*!< Value identifying \ref ITM_RxBuffer is ready for next character. */
+
+
+/** \brief ITM Send Character
+
+ The function transmits a character via the ITM channel 0, and
+ \li Just returns when no debugger is connected that has booked the output.
+ \li Is blocking when a debugger is connected, but the previous character sent has not been transmitted.
+
+ \param [in] ch Character to transmit.
+
+ \returns Character to transmit.
+ */
+__STATIC_INLINE uint32_t ITM_SendChar (uint32_t ch)
+{
+ if ((ITM->TCR & ITM_TCR_ITMENA_Msk) && /* ITM enabled */
+ (ITM->TER & (1UL << 0) ) ) /* ITM Port #0 enabled */
+ {
+ while (ITM->PORT[0].u32 == 0);
+ ITM->PORT[0].u8 = (uint8_t) ch;
+ }
+ return (ch);
+}
+
+
+/** \brief ITM Receive Character
+
+ The function inputs a character via the external variable \ref ITM_RxBuffer.
+
+ \return Received character.
+ \return -1 No character pending.
+ */
+__STATIC_INLINE int32_t ITM_ReceiveChar (void) {
+ int32_t ch = -1; /* no character available */
+
+ if (ITM_RxBuffer != ITM_RXBUFFER_EMPTY) {
+ ch = ITM_RxBuffer;
+ ITM_RxBuffer = ITM_RXBUFFER_EMPTY; /* ready for next character */
+ }
+
+ return (ch);
+}
+
+
+/** \brief ITM Check Character
+
+ The function checks whether a character is pending for reading in the variable \ref ITM_RxBuffer.
+
+ \return 0 No character available.
+ \return 1 Character available.
+ */
+__STATIC_INLINE int32_t ITM_CheckChar (void) {
+
+ if (ITM_RxBuffer == ITM_RXBUFFER_EMPTY) {
+ return (0); /* no character available */
+ } else {
+ return (1); /* character available */
+ }
+}
+
+/*@} end of CMSIS_core_DebugFunctions */
+
+#endif /* __CORE_CM4_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_TEENSY3_1/core_cm4_simd.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,673 @@
+/**************************************************************************//**
+ * @file core_cm4_simd.h
+ * @brief CMSIS Cortex-M4 SIMD Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#ifndef __CORE_CM4_SIMD_H
+#define __CORE_CM4_SIMD_H
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ ******************************************************************************/
+
+
+/* ################### Compiler specific Intrinsics ########################### */
+/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
+ Access to dedicated SIMD instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#define __SADD8 __sadd8
+#define __QADD8 __qadd8
+#define __SHADD8 __shadd8
+#define __UADD8 __uadd8
+#define __UQADD8 __uqadd8
+#define __UHADD8 __uhadd8
+#define __SSUB8 __ssub8
+#define __QSUB8 __qsub8
+#define __SHSUB8 __shsub8
+#define __USUB8 __usub8
+#define __UQSUB8 __uqsub8
+#define __UHSUB8 __uhsub8
+#define __SADD16 __sadd16
+#define __QADD16 __qadd16
+#define __SHADD16 __shadd16
+#define __UADD16 __uadd16
+#define __UQADD16 __uqadd16
+#define __UHADD16 __uhadd16
+#define __SSUB16 __ssub16
+#define __QSUB16 __qsub16
+#define __SHSUB16 __shsub16
+#define __USUB16 __usub16
+#define __UQSUB16 __uqsub16
+#define __UHSUB16 __uhsub16
+#define __SASX __sasx
+#define __QASX __qasx
+#define __SHASX __shasx
+#define __UASX __uasx
+#define __UQASX __uqasx
+#define __UHASX __uhasx
+#define __SSAX __ssax
+#define __QSAX __qsax
+#define __SHSAX __shsax
+#define __USAX __usax
+#define __UQSAX __uqsax
+#define __UHSAX __uhsax
+#define __USAD8 __usad8
+#define __USADA8 __usada8
+#define __SSAT16 __ssat16
+#define __USAT16 __usat16
+#define __UXTB16 __uxtb16
+#define __UXTAB16 __uxtab16
+#define __SXTB16 __sxtb16
+#define __SXTAB16 __sxtab16
+#define __SMUAD __smuad
+#define __SMUADX __smuadx
+#define __SMLAD __smlad
+#define __SMLADX __smladx
+#define __SMLALD __smlald
+#define __SMLALDX __smlaldx
+#define __SMUSD __smusd
+#define __SMUSDX __smusdx
+#define __SMLSD __smlsd
+#define __SMLSDX __smlsdx
+#define __SMLSLD __smlsld
+#define __SMLSLDX __smlsldx
+#define __SEL __sel
+#define __QADD __qadd
+#define __QSUB __qsub
+
+#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
+ ((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
+
+#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
+ ((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
+
+#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
+ ((int64_t)(ARG3) << 32) ) >> 32))
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_iar.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+#include <cmsis_ccs.h>
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHADD16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhadd16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSUB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsub16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHASX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhasx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("ssax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("shsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UQSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uqsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UHSAX(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uhsax %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USAD8(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("usad8 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __USADA8(uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("usada8 %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SSAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+#define __USAT16(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat16 %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __UXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("uxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTB16(uint32_t op1)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtb16 %0, %1" : "=r" (result) : "r" (op1));
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SXTAB16(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sxtab16 %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUAD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuad %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUADX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smuadx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLAD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlad %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLADX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smladx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLALD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlald %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLALDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((uint64_t)(ARG3) >> 32), __ARG3_L = (uint32_t)((uint64_t)(ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlaldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSD (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMUSDX (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("smusdx %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSD (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsd %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMLSDX (uint32_t op1, uint32_t op2, uint32_t op3)
+{
+ uint32_t result;
+
+ __ASM volatile ("smlsdx %0, %1, %2, %3" : "=r" (result) : "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+#define __SMLSLD(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsld %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+#define __SMLSLDX(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __ARG1 = (ARG1), __ARG2 = (ARG2), __ARG3_H = (uint32_t)((ARG3) >> 32), __ARG3_L = (uint32_t)((ARG3) & 0xFFFFFFFFUL); \
+ __ASM volatile ("smlsldx %0, %1, %2, %3" : "=r" (__ARG3_L), "=r" (__ARG3_H) : "r" (__ARG1), "r" (__ARG2), "0" (__ARG3_L), "1" (__ARG3_H) ); \
+ (uint64_t)(((uint64_t)__ARG3_H << 32) | __ARG3_L); \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SEL (uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("sel %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QADD(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qadd %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __QSUB(uint32_t op1, uint32_t op2)
+{
+ uint32_t result;
+
+ __ASM volatile ("qsub %0, %1, %2" : "=r" (result) : "r" (op1), "r" (op2) );
+ return(result);
+}
+
+#define __PKHBT(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ __ASM ("pkhbt %0, %1, %2, lsl %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+#define __PKHTB(ARG1,ARG2,ARG3) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1), __ARG2 = (ARG2); \
+ if (ARG3 == 0) \
+ __ASM ("pkhtb %0, %1, %2" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2) ); \
+ else \
+ __ASM ("pkhtb %0, %1, %2, asr %3" : "=r" (__RES) : "r" (__ARG1), "r" (__ARG2), "I" (ARG3) ); \
+ __RES; \
+ })
+
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __SMMLA (int32_t op1, int32_t op2, int32_t op3)
+{
+ int32_t result;
+
+ __ASM volatile ("smmla %0, %1, %2, %3" : "=r" (result): "r" (op1), "r" (op2), "r" (op3) );
+ return(result);
+}
+
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+
+/*------ CM4 SIMD Intrinsics -----------------------------------------------------*/
+/* not yet supported */
+/*-- End CM4 SIMD Intrinsics -----------------------------------------------------*/
+
+
+#endif
+
+/*@} end of group CMSIS_SIMD_intrinsics */
+
+
+#endif /* __CORE_CM4_SIMD_H */
+
+#ifdef __cplusplus
+}
+#endif
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_TEENSY3_1/core_cmFunc.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,636 @@
+/**************************************************************************//**
+ * @file core_cmFunc.h
+ * @brief CMSIS Cortex-M Core Function Access Header File
+ * @version V3.20
+ * @date 25. February 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ register uint32_t __regIPSR __ASM("ipsr");
+ return(__regIPSR);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ register uint32_t __regXPSR __ASM("xpsr");
+ return(__regXPSR);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ return(__regProcessStackPointer);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ __regProcessStackPointer = topOfProcStack;
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ return(__regMainStackPointer);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ __regMainStackPointer = topOfMainStack;
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0xff);
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/** \brief Enable IRQ Interrupts
+
+ This function enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ uint32_t result;
+
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) */
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all instrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+
+#endif /* __CORE_CMFUNC_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_TEENSY3_1/core_cmInstr.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,688 @@
+/**************************************************************************//**
+ * @file core_cmInstr.h
+ * @brief CMSIS Cortex-M Core Instruction Access Header File
+ * @version V3.20
+ * @date 05. March 2013
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2013 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __nop
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+#define __WFI __wfi
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __wfe
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __sev
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+#define __ISB() __isb(0xF)
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() __dsb(0xF)
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() __dmb(0xF)
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __rev
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+ rev16 r0, r0
+ bx lr
+}
+#endif
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+ revsh r0, r0
+ bx lr
+}
+#endif
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+#define __ROR __ror
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __breakpoint(value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __RBIT __rbit
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXB(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXH(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXW(value, ptr) __strex(value, ptr)
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+#define __CLREX __clrex
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT __ssat
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __usat
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __clz
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+
+#include <cmsis_iar.h>
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+
+#include <cmsis_ccs.h>
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constrant "l"
+ * Otherwise, use general registers, specified by constrant "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __NOP(void)
+{
+ __ASM volatile ("nop");
+}
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFI(void)
+{
+ __ASM volatile ("wfi");
+}
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFE(void)
+{
+ __ASM volatile ("wfe");
+}
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __SEV(void)
+{
+ __ASM volatile ("sev");
+}
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ISB(void)
+{
+ __ASM volatile ("isb");
+}
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DSB(void)
+{
+ __ASM volatile ("dsb");
+}
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void)
+{
+ __ASM volatile ("dmb");
+}
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+ return __builtin_bswap32(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ return (short)__builtin_bswap16(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32 - op2));
+}
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function performs a exclusive LDR command for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function performs a exclusive LDR command for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function performs a exclusive LDR command for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function performs a exclusive STR command for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function performs a exclusive STR command for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function performs a exclusive STR command for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void)
+{
+ __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_TEENSY3_1/system_MK20DX256.h Tue Feb 03 15:31:20 2015 +0000
@@ -0,0 +1,85 @@
+/*
+** ###################################################################
+** Compilers: ARM Compiler
+** Freescale C/C++ for Embedded ARM
+** GNU C Compiler
+** IAR ANSI C/C++ Compiler for ARM
+**
+**
+**
+** Version: rev. 2.0, 2012-03-19
+**
+** Abstract:
+** Provides a system configuration function and a global variable that
+** contains the system frequency. It configures the device and initializes
+** the oscillator (PLL) that is part of the microcontroller device.
+**
+** Copyright: 2015 Freescale Semiconductor, Inc. All Rights Reserved.
+**
+** http: www.freescale.com
+** mail: support@freescale.com
+**
+** Revisions:
+** - rev. 1.0 (2011-12-15)
+** Initial version
+** - rev. 2.0 (2012-03-19)
+** PDB Peripheral register structure updated.
+** DMA Registers and bits for unsupported DMA channels removed.
+**
+** ###################################################################
+*/
+
+/**
+ * @file MK20DX256
+ * @version 2.0
+ * @date 2012-03-19
+ * @brief Device specific configuration file for MK20DX256 (header file)
+ *
+ * Provides a system configuration function and a global variable that contains
+ * the system frequency. It configures the device and initializes the oscillator
+ * (PLL) that is part of the microcontroller device.
+ */
+
+#ifndef SYSTEM_MK20DX256_H_
+#define SYSTEM_MK20DX256_H_ /**< Symbol preventing repeated inclusion */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+/**
+ * @brief System clock frequency (core clock)
+ *
+ * The system clock frequency supplied to the SysTick timer and the processor
+ * core clock. This variable can be used by the user application to setup the
+ * SysTick timer or configure other parameters. It may also be used by debugger to
+ * query the frequency of the debug timer or configure the trace clock speed
+ * SystemCoreClock is initialized with a correct predefined value.
+ */
+extern uint32_t SystemCoreClock;
+
+/**
+ * @brief Setup the microcontroller system.
+ *
+ * Typically this function configures the oscillator (PLL) that is part of the
+ * microcontroller device. For systems with variable clock speed it also updates
+ * the variable SystemCoreClock. SystemInit is called from startup_device file.
+ */
+void SystemInit (void);
+
+/**
+ * @brief Updates the SystemCoreClock variable.
+ *
+ * It must be called whenever the core clock is changed during program
+ * execution. SystemCoreClockUpdate() evaluates the clock register settings and calculates
+ * the current core clock.
+ */
+void SystemCoreClockUpdate (void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* #if !defined(SYSTEM_MK20DX256_H_) */
--- a/TARGET_UBLOX_C027/TARGET_NXP/TARGET_LPC176X/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_UBLOX_C027/TARGET_NXP/TARGET_LPC176X/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -45,6 +45,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/mbed_overrides.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/startup_LPC17xx.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_ARM_STD/system_LPC17xx.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_ARM/mbed_overrides.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_ARM/system_LPC17xx.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_CR/board.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_CR/cmsis_nvic.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_CR/mbed_overrides.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_CR/retarget.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_CR/startup_LPC17xx.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_CR/system_LPC17xx.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_CS/board.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_CS/libmbed.a has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_GCC_CS/retarget.o has changed
--- a/TARGET_UBLOX_C027/TOOLCHAIN_IAR/LPC17xx.icf Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_UBLOX_C027/TOOLCHAIN_IAR/LPC17xx.icf Tue Feb 03 15:31:20 2015 +0000
@@ -1,40 +1,44 @@
-/* [ROM] */
-define symbol __intvec_start__ = 0x00000000;
-define symbol __region_ROM_start__ = 0x00000000;
-define symbol __CRP_start__ = 0x000002FC;
-define symbol __CRP_end__ = 0x000002FF;
-define symbol __region_ROM_end__ = 0x0007FFFF;
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x00000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x00000000;
+define symbol __ICFEDIT_region_ROM_end__ = 0x0007FFFF;
+define symbol __ICFEDIT_region_NVIC_start__ = 0x10000000;
+define symbol __ICFEDIT_region_NVIC_end__ = 0x100000C7;
+define symbol __ICFEDIT_region_RAM_start__ = 0x100000C8;
+define symbol __ICFEDIT_region_RAM_end__ = 0x10007FDF;
-/* [RAM] Vector table dynamic copy: 8_byte_aligned(49 vect * 4 bytes) = 8_byte_aligned(0xC4) = 0xC8*/
-define symbol __NVIC_start__ = 0x10000000;
-define symbol __NVIC_end__ = 0x100000C7;
-define symbol __region_RAM_start__ = 0x100000C8;
-define symbol __region_RAM_end__ = 0x10007FDF;
-define symbol _AHB_RAM_start__ = 0x2007C000;
-define symbol _AHB_RAM_end__ = 0x20083FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x800;
+define symbol __ICFEDIT_size_heap__ = 0x1000;
+/**** End of ICF editor section. ###ICF###*/
-/* Memory regions */
-define memory mem with size = 4G;
+define symbol __CRP_start__ = 0x000002FC;
+define symbol __CRP_end__ = 0x000002FF;
-define region ROM_region = mem:[from __region_ROM_start__ to __region_ROM_end__] - mem:[from __CRP_start__ to __CRP_end__];
-define region CRP_region = mem:[from __CRP_start__ to __CRP_end__];
-
-define region RAM_region = mem:[from __region_RAM_start__ to __region_RAM_end__];
-define region AHB_RAM_region = mem:[from _AHB_RAM_start__ to _AHB_RAM_end__];
+define symbol __RAM1_start__ = 0x2007C000;
+define symbol __RAM1_end__ = 0x20083FFF;
-/* Stack and Heap */
-define symbol __size_cstack__ = 0x800;
-define symbol __size_heap__ = 0x800;
-define block CSTACK with alignment = 8, size = __size_cstack__ { };
-define block HEAP with alignment = 8, size = __size_heap__ { };
-define block STACKHEAP with fixed order { block HEAP, block CSTACK };
+define memory mem with size = 4G;
+define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__] - mem:[from __CRP_start__ to __CRP_end__];
+define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__];
+define region CRP_region = mem:[from __CRP_start__ to __CRP_end__];
+define region RAM1_region = mem:[from __RAM1_start__ to __RAM1_end__];
-initialize by copy with packing = zeros { readwrite };
+define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { };
+define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { };
+
+
+initialize by copy { readwrite };
do not initialize { section .noinit };
-place at address mem:__intvec_start__ { section .intvec };
-place at address mem:0x2FC { section CRPKEY };
-place in ROM_region { readonly };
-place in RAM_region { readwrite, block STACKHEAP };
-place in AHB_RAM_region { section USB_RAM };
-place in CRP_region { section .crp };
+place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
+place in ROM_region { readonly };
+place in RAM_region { readwrite,
+ block HEAP, block CSTACK };
+
+place in CRP_region { section .crp };
+place in RAM1_region { section USB_RAM };
Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/board.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/cmain.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/cmsis_nvic.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/mbed.a has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/mbed_overrides.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/retarget.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/startup_LPC17xx.o has changed
Binary file TARGET_UBLOX_C027/TOOLCHAIN_IAR/system_LPC17xx.o has changed
--- a/TARGET_WALLBOT_BLE/TARGET_NORDIC/TARGET_MCU_NRF51822/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_WALLBOT_BLE/TARGET_NORDIC/TARGET_MCU_NRF51822/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -45,6 +45,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_WALLBOT_BLE/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_WALLBOT_BLE/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_WALLBOT_BLE/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_WALLBOT_BLE/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_WALLBOT_BLE/TOOLCHAIN_ARM_STD/startup_nRF51822.o has changed
Binary file TARGET_WALLBOT_BLE/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_WALLBOT_BLE/TOOLCHAIN_ARM_STD/system_nrf51822.o has changed
Binary file TARGET_WALLBOT_BLE/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_WALLBOT_BLE/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_WALLBOT_BLE/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_WALLBOT_BLE/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_WALLBOT_BLE/TOOLCHAIN_GCC_ARM/system_nrf51822.o has changed
--- a/TARGET_WALLBOT_BLE/nrf51.h Thu Nov 27 13:33:22 2014 +0000 +++ b/TARGET_WALLBOT_BLE/nrf51.h Tue Feb 03 15:31:20 2015 +0000 @@ -376,7 +376,8 @@ __IO uint32_t EVENTS_RXTO; /*!< Receiver timeout. */ __I uint32_t RESERVED5[46]; __IO uint32_t SHORTS; /*!< Shortcuts for TWI. */ - __I uint32_t RESERVED6[64]; + __I uint32_t RESERVED6[63]; + __IO uint32_t INTEN; /*!< Interrupt enable register. */ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */ __I uint32_t RESERVED7[93]; @@ -1213,4 +1214,3 @@ #endif /* nRF51_H */ -
--- a/TARGET_XADOW_M0/TARGET_NXP/TARGET_LPC11UXX/gpio_object.h Thu Nov 27 13:33:22 2014 +0000
+++ b/TARGET_XADOW_M0/TARGET_NXP/TARGET_LPC11UXX/gpio_object.h Tue Feb 03 15:31:20 2015 +0000
@@ -45,6 +45,10 @@
return ((*obj->reg_in & obj->mask) ? 1 : 0);
}
+static inline int gpio_is_connected(const gpio_t *obj) {
+ return obj->pin != (PinName)NC;
+}
+
#ifdef __cplusplus
}
#endif
Binary file TARGET_XADOW_M0/TOOLCHAIN_ARM_MICRO/board.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_ARM_MICRO/cmsis_nvic.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_ARM_MICRO/mbed.ar has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_ARM_MICRO/retarget.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_ARM_MICRO/startup_LPC11xx.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_ARM_MICRO/sys.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_ARM_MICRO/system_LPC11Uxx.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_ARM_STD/board.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_ARM_STD/cmsis_nvic.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_ARM_STD/mbed.ar has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_ARM_STD/retarget.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_ARM_STD/sys.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_ARM_STD/system_LPC11Uxx.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_GCC_ARM/board.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_GCC_ARM/cmsis_nvic.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_GCC_ARM/libmbed.a has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_GCC_ARM/retarget.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_GCC_ARM/system_LPC11Uxx.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_GCC_CR/board.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_GCC_CR/cmsis_nvic.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_GCC_CR/libmbed.a has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_GCC_CR/retarget.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_GCC_CR/startup_LPC11xx.o has changed
Binary file TARGET_XADOW_M0/TOOLCHAIN_GCC_CR/system_LPC11Uxx.o has changed
--- a/gpio_api.h Thu Nov 27 13:33:22 2014 +0000 +++ b/gpio_api.h Tue Feb 03 15:31:20 2015 +0000 @@ -28,6 +28,12 @@ **/ uint32_t gpio_set(PinName pin); +/* Checks if gpio object is connected (pin was not initialized with NC) + * @param pin The pin to be set as GPIO + * @return 0 if port is initialized with NC + **/ +int gpio_is_connected(const gpio_t *obj); + /* GPIO object */ void gpio_init(gpio_t *obj, PinName pin);
--- a/mbed.h Thu Nov 27 13:33:22 2014 +0000 +++ b/mbed.h Tue Feb 03 15:31:20 2015 +0000 @@ -16,7 +16,7 @@ #ifndef MBED_H #define MBED_H -#define MBED_LIBRARY_VERSION 92 +#define MBED_LIBRARY_VERSION 93 #include "platform.h"
--- a/us_ticker_api.h Thu Nov 27 13:33:22 2014 +0000
+++ b/us_ticker_api.h Tue Feb 03 15:31:20 2015 +0000
@@ -22,7 +22,7 @@
extern "C" {
#endif
-typedef uint64_t timestamp_t;
+typedef uint32_t timestamp_t;
uint32_t us_ticker_read(void);